Science.gov

Sample records for les formes extrieures

  1. Forme pseudotumorale de la tuberculose pulmonaire et les difficultés diagnostic: à propos d’un cas

    PubMed Central

    Ouarssani, Aziz; Atoini, Fouad; Reda, Rafik; Lhou, Fatima Ait; Rguibi, Mustapha Idrissi

    2013-01-01

    La tuberculose pulmonaire est un problème majeur de santé publique. Dans sa forme commune, le diagnostic est habituellement aisé, mais elle peut se présenter sous une forme trompeuse et entrainer un retard diagnostic et thérapeutique. Nous rapportons le cas d’un patient âgé de 25ans, étudiant, sans antécédents pathologiques particuliers, hospitalisé dans notre formation pour un syndrome bronchique trainant avec altération de l’état général. L’examen clinique pleuropulmonaire est normal, l’examen des aires ganglionnaires trouve une adénopathie sus claviculaire droite, la radiographie thoracique de face objective une opacité hilaire droite hétérogène à contours irréguliers, la TDM thoracique retrouve un processus lésionnel tissulaire du lobe supérieur droit qui s’étend vers le médiastin et englobe partiellement la veine cave supérieure avec une adénopathie latérotracheale droite nécrosée. La fibroscopie bronchique objective un élargissement des éperons intersegmentaires du lobe supérieur droit, les biopsies réalisées avec étude histologique sont non concluantes. Les recherches de BK dans les expectorations et dans le liquide d’aspiration bronchique sont negatives. L’IDR à la tuberculine est à 15mm. C’est la ponction transparietale scannoguidée avec étude anatomopathologique qui confirme le diagnostic de tuberculose caseofolliculaire. La sérologie VIH est négative. Le diagnostic de tuberculose pulmonaire pseudotumorale chez un immunocompétent a été retenu et le patient a été mis sous traitement antibacillaire (régime standard national Marocain) par rifampicine, isoniazide, pyrazinamide et éthambutol pendant 6 mois avec évolution clinique et radiologique favorable. La tuberculose pulmonaire ne cesse de tromper le clinicien par son polymorphisme clinique et radiologique, elle doit être évoquée devant toute atteinte pulmonaire d’allure tumorale pour permettre une prise en charge précoce de la

  2. Residus de 2-formes differentielles sur les surfaces algebriques et applications aux codes correcteurs d'erreurs

    NASA Astrophysics Data System (ADS)

    Couvreur, A.

    2009-05-01

    The theory of algebraic-geometric codes has been developed in the beginning of the 80's after a paper of V.D. Goppa. Given a smooth projective algebraic curve X over a finite field, there are two different constructions of error-correcting codes. The first one, called "functional", uses some rational functions on X and the second one, called "differential", involves some rational 1-forms on this curve. Hundreds of papers are devoted to the study of such codes. In addition, a generalization of the functional construction for algebraic varieties of arbitrary dimension is given by Y. Manin in an article of 1984. A few papers about such codes has been published, but nothing has been done concerning a generalization of the differential construction to the higher-dimensional case. In this thesis, we propose a differential construction of codes on algebraic surfaces. Afterwards, we study the properties of these codes and particularly their relations with functional codes. A pretty surprising fact is that a main difference with the case of curves appears. Indeed, if in the case of curves, a differential code is always the orthogonal of a functional one, this assertion generally fails for surfaces. Last observation motivates the study of codes which are the orthogonal of some functional code on a surface. Therefore, we prove that, under some condition on the surface, these codes can be realized as sums of differential codes. Moreover, we show that some answers to some open problems "a la Bertini" could give very interesting informations on the parameters of these codes.

  3. Les jeux de hasard chez les enfants et les adolescents

    PubMed Central

    Gupta, Rina; Pinzon, Jorge L

    2012-01-01

    RÉSUMÉ Même si, au Canada, les mineurs n’ont pas le droit de jouer à des jeux de hasard légalisés, les adolescents participent souvent à des jeux de hasard soit légalisés (produits de loterie, casino, terminaux de jeux vidéo), soit autonomes (jeux de cartes, paris sportifs, dés) à la maison et en milieu scolaire. Chez les adultes, le taux de prévalence de dépendance aux jeux de hasard au cours de la vie se situe entre 1 % et 2 %. D’après les données existantes, la prévalence chez les adolescents serait de deux à quatre fois plus élevée. On ne sait pas grand-chose des facteurs de risque d’apparition et de perpétuation d’une dépendance pathologique aux jeux de hasard. Le présent document de principes vise à informer les pédiatres, les médecins de famille et les autres professionnels de la santé des connaissances émergentes sur les jeux de hasard pendant l’enfance et l’adolescence et du risque de conséquences graves qui s’y rattachent. On y exhorte également les gouvernements fédéral, provinciaux et territoriaux à inclure cette question dans leur programme et à tenir compte des facteurs sociopolitiques associés aux jeux de hasard.

  4. Les galaxies

    NASA Astrophysics Data System (ADS)

    Combes, Francoise

    2016-08-01

    Considerable progress has been made on galaxy formation and evolution in recent years, and new issues. The old Hubble classification according to the tuning fork of spirals, lenticulars and ellipticals, is still useful but has given place to the red sequence, the blue cloud and the green valley, showing a real bimodality of types between star forming galaxies (blue) and quenched ones (red). Large surveys have shown that stellar mass and environment density are the two main factors of the evolution from blue to red sequences. Evolution is followed directly with redshift through a look-back time of more than 12 billion years. The most distant galaxy at z=11. has already a stellar mass of a billion suns. In an apparent anti-hierarchical scenario, the most massive galaxies form stars early on, while essentially dwarf galaxies are actively star-formers now. This downsizing feature also applies to the growth of super-massive black holes at the heart of each bulgy galaxy. The feedback from active nuclei is essential to explain the distribution of mass in galaxies, and in particular to explain why the fraction of baryonic matter is so low, lower by more than a factor 5 than the baryonic fraction of the Universe. New instruments just entering in operation, like MUSE and ALMA, provide a new and rich data flow, which is developed in this series of articles.

  5. Les plaies du tendon patellaire

    PubMed Central

    Mechchat, Atif; Elidrissi, Mohammed; Mardy, Abdelhak; Elayoubi, Abdelghni; Shimi, Mohammed; Elibrahimi, Abdelhalim; Elmrini, Abdelmajid

    2014-01-01

    Les plaies du tendon patellaire sont peu fréquentes et sont peu rapportés dans la littérature, contrairement aux ruptures sous cutanées. Les sections du tendon patellaire nécessitent une réparation immédiate afin de rétablir l'appareil extenseur et de permettre une récupération fonctionnelle précoce. A travers ce travail rétrospectif sur 13 cas, nous analysons les aspects épidémiologiques, thérapeutiques et pronostiques de ce type de pathologie en comparant différents scores. L’âge moyen est de 25 ans avec une prédominance masculine. Les étiologies sont dominées par les accidents de la voie publique (68%) et les agressions par agent tranchant (26%) et contendant (6 %). Tous nos patients ont bénéficié d'un parage chirurgical avec suture tendineuse direct protégée par un laçage au fils d'aciers en légère flexion. La rééducation est débutée après sédation des phénomènes inflammatoires. Au dernier recul les résultats sont excellents et bon à 92%. Nous n'avons pas noté de différence de force musculaire et d'amplitude articulaire entre le genou sain et le genou lésé. Les lésions ouvertes du tendon patellaire est relativement rare. La prise en charge chirurgicale rapide donne des résultats assez satisfaisants. La réparation est généralement renforcée par un semi-tendineux, synthétique ou métallique en forme de cadre de renfort pour faciliter la réadaptation et réduire le risque de récidive après la fin de l'immobilisation. PMID:25170379

  6. Criteria for Modeling in LES of Multicomponent Fuel Flow

    NASA Technical Reports Server (NTRS)

    Bellan, Josette; Selle, Laurent

    2009-01-01

    A report presents a study addressing the question of which large-eddy simulation (LES) equations are appropriate for modeling the flow of evaporating drops of a multicomponent liquid in a gas (e.g., a spray of kerosene or diesel fuel in air). The LES equations are obtained from the direct numerical simulation (DNS) equations in which the solution is computed at all flow length scales, by applying a spatial low-pass filter. Thus, in LES the small scales are removed and replaced by terms that cannot be computed from the LES solution and instead must be modeled to retain the effect of the small scales into the equations. The mathematical form of these models is a subject of contemporary research. For a single-component liquid, there is only one LES formulation, but this study revealed that for a multicomponent liquid, there are two non-equivalent LES formulations for the conservation equations describing the composition of the vapor. Criteria were proposed for selecting the multicomponent LES formulation that gives the best accuracy and increased computational efficiency. These criteria were applied in examination of filtered DNS databases to compute the terms in the LES equations. The DNS databases are from mixing layers of diesel and kerosene fuels. The comparisons resulted in the selection of one of the multicomponent LES formulations as the most promising with respect to all criteria.

  7. Diffusion dans les liquides

    NASA Astrophysics Data System (ADS)

    Dianoux, A. J.

    2003-09-01

    Après une brève introduction qui rappelle les concepts détaillés dans le cours de M. Bée, nous présentons un aperçu de trois de nos travaux sur l'étude de la diffusion. Tout d'abord la dynamique de l'eau, dans son état normal ou surfondu, révèle la complexité apportée par le réseau de liaisons hydrogène. Ensuite l'effet du confinement sur la dynamique de l'eau sera étudié dans le cas de la membrane Nafion. Enfin la diffusion dans les phases nématique et smectique A d'un cristal liquide permet d'obtenir la valeur du potentiel qui maintient les couches dans la phase smectique.

  8. Les aspects psychosociaux de l’obésité chez les enfants et les adolescents

    PubMed Central

    Nieman, Peter; LeBlanc, Claire MA

    2012-01-01

    RÉSUMÉ En plus de donner des conseils aux familles au sujet de l’activité physique régulière et d’une saine alimentation, les cliniciens doivent déterminer les facteurs psychosociaux qui contribuent à l’obésité des enfants ou des adolescents et les aider à y faire face. Les personnes touchées peuvent souffrir de dépression, de mauvaise estime de soi, d’intimidation et de préjugés liés au poids, qui sont tous des expériences qui peuvent compliquer l’obtention des résultats de santé souhaités. Les cliniciens devraient tenter de déterminer les facteurs stressants sous-jacents et s’assurer de la mise en œuvre de conseils pertinents.

  9. Protection des ions organiques contre les dommages induits a l'ADN par les electrons de basse energie

    NASA Astrophysics Data System (ADS)

    Dumont, Ariane

    Il a ete demontre que les electrons de basse energie (EBE) peuvent induire des cassures simple brin (CSB) a l'ADN, via la formation d'anions transitoires qui decroissent par attachement dissociatif, ou dans d'autres etats electroniques dissociatifs menant a la fragmentation. Afin d'effectuer une etude complete des effets des electrons de basse energie sur la matiere biologique, il est necessaire de comprendre leur mecanismes d'interaction non seulement avec l'ADN, mais avec les constituants de son environnement. Les histones sont une composante importante de l'environnement moleculaire de l'ADN. Leur charge positive leur permet de s'associer aux groupements phosphate anionique de l'ADN. Le role principal de ces proteines basiques consiste a organiser l'ADN et l'empaqueter afin de former la chromatine. Les cations sont une autre composante importante de la cellule; ils jouent un role dans la stabilisation de la conformation B de l'ADN in vitro par leurs interactions avec les petits et grands sillons de l'ADN, ainsi qu'avec le groupement phosphate charge negativement. Avec les histones, ils participent egalement a la compaction de l'ADN pour former la chromatine. Cette etude a pour but de comprendre comment la presence d'ions organiques (sous forme de Tris et d'EDTA) a proximite de l'ADN modifie le rendement de cassures simple brin induit par les electrons de basse energie. Le Tris et l'EDTA ont-ete choisis comme objet d'etude, puisqu'en solution, ils forment le tampon standard pour solubiliser l'ADN dans les experiences in vitro (10mM Tris, 1mM EDTA). De plus, la molecule Tris possede un groupement amine alors que l'EDTA possede 4 groupements carboxyliques. Ensembles, ils peuvent se comporter comme un modele simple pour les acides amines. Le ratio molaire de 10 :1 de Tris par rapport a l'EDTA a pour but d'imiter le comportement des histones qui sont riches en arginine et lysine, acides amines possedant un groupement amine charge positivement additionnel. Des films d

  10. Pediatric Quality of Life Enjoyment and Satisfaction Questionnaire (PQ-LES-Q): Reliability and Validity

    ERIC Educational Resources Information Center

    Endicott, Jean; Nee, John; Yang, Ruoyong; Wohlberg, Christopher

    2006-01-01

    Objective: The pediatric version of the Short Form of the Quality of Life Enjoyment and Satisfaction Questionnaire (PQ-LES-Q) was developed to aid in the assessment of an important aspect of life experience in children and adolescents. Method: The reliability and validity of the PQ-LES-Q was tested using data from a sample of 376 outpatient…

  11. Les violences conjugales à Dakar

    PubMed Central

    Soumah, Mohamed Maniboliot; Issa, Abdoul Wahab; Ndiaye, Mor; Ndoye, El Hadj Oumar; Sow, Mamadou Lamine

    2015-01-01

    L'objectif était d’évaluer les aspects épidémiologiques des violences conjugales, identifier les facteurs de risques et les différents types de violences conjugales, évaluer les conséquences des violences conjugales sur la santé des victimes, afin d'améliorer la prise en charge des victimes et la prévention du phénomène. Il s'est agit d'une étude transversale effectuée de décembre 2012 à janvier 2013 à Dakar. Les données ont été recueillies, après consentement, sur fiche d'enquête anonyme soumise à toute personne volontaire vivant en couple et résidant à Dakar. L'analyse statistique a été effectuée avec le logiciel SPSS 13.0. Le nombre de personnes victimes de violences conjugales était de 60 soit 37,30% dont 31 femmes (51,70%) et 29 hommes (48,30%). Le sex-ratio était de 0,93. Parmi les victimes, 53 étaient scolarisées soit 88,30%. Le régime matrimonial était de type monogame dans 39 cas (65%) et polygame dans 21 cas (35%). La vie en couple durait depuis moins de 11 ans dans 60% des cas et durait de 11 ans à 20 ans au plus dans 26,6% des cas. L’étude des types de violences montrait la fréquence des agressions physiques. Les armes utilisées étaient surtout les armes naturelles. Les principaux facteurs de risque de violence conjugale sont les facteurs sociodémographiques, culturels et économiques comme le jeune âge, l'inégalité du genre, les jeunes couples, la précarité, le niveau d'instruction élevé. La prise en charge des victimes et la prévention du phénomène restent insuffisantes dans nos pays. PMID:26918077

  12. Etude du profil d'echelle des formes et de mesures d'energie de texture pour l'evaluation semi-automatique des degâts sur les bâtiments dans les images satellitaires de tres haute resolution

    NASA Astrophysics Data System (ADS)

    Dubois, David

    Dozens of natural disasters occur each year throughout the world. They cause the death of thousands of people and cost billions of dollars in losses and reconstruction. Considerable resources are invested in the various phases of the emergency cycle like response and reconstruction. To avoid mismanagement of human and material resources during the response to a disaster, decisions must be made very quickly. To make appropriate choices, decision makers need up to date information on conditions on the ground. The images acquired by satellite are a possible source for this information. The new satellites equipped with optical sensors having spatial resolution finer than a meter per pixel provide details useful for determining the status of roads and damage to buildings. Unfortunately, visual analysis of these very large images is time consuming and fatigue may increase the rate of human error. In this thesis, we propose a semi-automatic method for the extraction of buildings and damage assessment using geometric, radiometric and texture features. The work includes a review of the literature in order to identify gaps in current approaches and possible solutions, the development of a methodology to solve this difficult problem, the testing of the proposed method on a portion of images of the city of Port-au-Prince, Haiti captured before and after the earthquake of January 12, 2010, assessment of results and their comparison with the literature. The proposed method requires processing of the image in a hierarchical tree shapes through the fast level set transform. Once the image is represented in this way, an algorithm for extracting meaningful forms is used to assign a representative form for each pixel. Geometrical descriptors such as area, perimeter and others from central moments are extracted from these forms. In addition, for damage assessment, energy measurements of texture are calculated on the forms before and after the event. Buildings are extracted using a

  13. Une vie active saine pour les enfants et les adolescents

    PubMed Central

    2002-01-01

    De mauvais modes de vie, comme une alimentation malsaine et l’inactivité physique, sont d'importants facteurs contributifs à une augmentation de la morbidité et de la mortalité secondaires à des maladies chroniques à l’âge adulte. Depuis dix ans, on remarque une augmentation du mode de vie sédentaire et de l’obésité chez les enfants et les adolescents, tant en Amérique du Nord qu’ailleurs dans le monde. Les médecins doivent être conscients de l’importance du problème, fournir des conseils de prévention aux familles et promouvoir une vie active saine dans leur pratique.

  14. ["Les Impatients": expression through art].

    PubMed

    Lamontagne, Céline; Palardy, Lorraine

    2015-01-01

    The organization called "Les Impatients" was founded in 1992. Using a unique model, Les Impatients welcomes those with mental health issues who would like to express themselves through art. Les Impatients offers free creative workshops and encourages exchanges with the community through the sharing of its participants' creations. The name Les Impatients reinforces the idea that the organization does not consider those attending its workshops as patients, but rather creators who are eager to heal, develop their craft and find their place in society. The participants contribute to the collective objective of breaking down the stigma that surrounds mental illness.Les Impatients collaborates with various mental health organizations in Quebec, such as the Institut universitaire en santé mentale de Montréal (IUSMM) affiliated to the Université de Montréal, Douglas Mental Health University Institute (DMHUI), the Centre de santé et services sociaux Drummond (CSSS Drummond) and the Centre de santé et services sociaux Pierre-Boucher (CSSS Pierre-Boucher). Les Impatients offers more than 48 workshops in eight different locations to around 450 participants each week.Dissemination activities, remarkable events, original projects: Les Impatients stands out through its realizations. Examples are exhibitions, collections of love letters, comic books, CD, concerts, and reading nights. The organization's originality resides in the exploration of the links between the work of the participants and that of professional artists. An illustration of this interest is the annual Parle-moi d'amour auction-exhibition, which has been one of Les Impatients' major events since 1999.As part of its mission, Les Impatients conserves the works of art created by the participants during the workshops. Its collection includes more than 15,000 works of art from Les Impatients as well as pieces donated by collectors of unconventional art, commonly known as "art brut" or "outsider art". The

  15. Validating LES for Jet Aeroacoustics

    NASA Technical Reports Server (NTRS)

    Bridges, James; Wernet, Mark P.

    2011-01-01

    Engineers charged with making jet aircraft quieter have long dreamed of being able to see exactly how turbulent eddies produce sound and this dream is now coming true with the advent of large eddy simulation (LES). Two obvious challenges remain: validating the LES codes at the resolution required to see the fluid-acoustic coupling, and the interpretation of the massive datasets that are produced. This paper addresses the former, the use of advanced experimental techniques such as particle image velocimetry (PIV) and Raman and Rayleigh scattering, to validate the computer codes and procedures used to create LES solutions. This paper argues that the issue of accuracy of the experimental measurements be addressed by cross-facility and cross-disciplinary examination of modern datasets along with increased reporting of internal quality checks in PIV analysis. Further, it argues that the appropriate validation metrics for aeroacoustic applications are increasingly complicated statistics that have been shown in aeroacoustic theory to be critical to flow-generated sound, such as two-point space-time velocity correlations. A brief review of data sources available is presented along with examples illustrating cross-facility and internal quality checks required of the data before it should be accepted for validation of LES.

  16. Validating LES for Jet Aeroacoustics

    NASA Technical Reports Server (NTRS)

    Bridges, James

    2011-01-01

    Engineers charged with making jet aircraft quieter have long dreamed of being able to see exactly how turbulent eddies produce sound and this dream is now coming true with the advent of large eddy simulation (LES). Two obvious challenges remain: validating the LES codes at the resolution required to see the fluid-acoustic coupling, and the interpretation of the massive datasets that result in having dreams come true. This paper primarily addresses the former, the use of advanced experimental techniques such as particle image velocimetry (PIV) and Raman and Rayleigh scattering, to validate the computer codes and procedures used to create LES solutions. It also addresses the latter problem in discussing what are relevant measures critical for aeroacoustics that should be used in validating LES codes. These new diagnostic techniques deliver measurements and flow statistics of increasing sophistication and capability, but what of their accuracy? And what are the measures to be used in validation? This paper argues that the issue of accuracy be addressed by cross-facility and cross-disciplinary examination of modern datasets along with increased reporting of internal quality checks in PIV analysis. Further, it is argued that the appropriate validation metrics for aeroacoustic applications are increasingly complicated statistics that have been shown in aeroacoustic theory to be critical to flow-generated sound.

  17. LES of mixing in coastal areas

    NASA Astrophysics Data System (ADS)

    Armenio, Vincenzo; Roman, Federico

    2008-11-01

    Large eddy simulations of near shore mixing are carried out using a new large-scale model, LES-COAST. The model integrates the Boussinesq form of the NS equations using a curvilinear formulation of the fractional step method. Complex geometry is reproduced with a combination of curvilinear mesh and immersed boundaries. Anisotropy of the problem (δxvert/δxhor˜10-2) has required a two eddy-viscosities model. Specifically we use a mixed model, composed of an anisotropic scale-similar part and an eddy viscosity, Smagorinsky part. Two eddy-viscosities are used, νT,v/h=(Cv/hδv/h)^2 |Sv/h| respectively in the two directions. The quantities δv/h are chosen proportional to the local grid spacings in the two directions. Density stratification is also considered using a very simple SGS model, based on the assumption that PrT= ScT=1. The algorithm is being used for real applications. The following studies will be discussed: the intrusion of fresh water of the Tevere river in the Tirreno sea; mixing in the Muggia Bay (Region of Trieste) under the action of the breeze forcing. Results have clearly shown the reliability of new- generation LES large-scale models for applications in problems with horizontal and vertical scales respectively of the order of 10 km and 50 m.

  18. SUSY Les Houches Accord 2

    SciTech Connect

    Allanach, B.; Balazs, C.; Belanger, G.; Bernhardt, M.; Boudjema, F.; Choudhury, D.; Desch, K.; Ellwanger, U.; Gambino, P.; Godbole, R.; Goto, T.; /Cambridge U., DAMTP /Monash U. /Annecy, LAPTH /Bonn U. /Harish-Chandra Res. Inst. /Orsay, LPT /Turin U. /INFN, Turin /Bangalore, Indian Inst. Sci. /KEK, Tsukuba /Barcelona U.

    2007-11-08

    The Supersymmetry Les Houches Accord (SLHA) [1] provides a universal set of conventions for conveying spectral and decay information for supersymmetry analysis problems in high energy physics. Here, we propose extensions of the conventions of the first SLHA to include various generalizations: the minimal supersymmetric standard model with violation of CP, R-parity, and flavor, as well as the simplest next-to-minimal model.

  19. SUSY Les Houches Accord 2

    SciTech Connect

    Allanach, B.; Balazs, C.; Belanger, G.; Bernhardt, M.; Boudjema, F.; Choudhury, D.; Desch, K.; Ellwanger, U.; Gambino, P.; Godbole, R.; Goto, T.; Guasch, J.; Guchait, M.; Hahn, T.; Heinemeyer, S.; Hugonie, C.; Hurth, T.; Kraml, S.; Kreiss, S.; Lykken, J.; Moortgat, F.; /Cambridge U., DAMTP /Monash U. /Annecy, LAPTH /Bonn U. /Harish-Chandra Res. Inst. /Orsay, LPT /Turin U. /INFN, Turin /Bangalore, Indian Inst. Sci. /KEK, Tsukuba /Barcelona U. /Tata Inst. /Munich, Max Planck Inst. /Cantabria Inst. of Phys. /Montpellier U. /CERN /SLAC /Edinburgh U. /Fermilab /Zurich, ETH /Southampton U.

    2007-11-08

    The Supersymmetry Les Houches Accord (SLHA) provides a universal set of conventions for conveying spectral and decay information for supersymmetry analysis problems in high energy physics. Here, we propose extensions of the conventions of the first SLHA to include various generalizations: the minimal supersymmetric standard model with violation of CP, R-parity, and flavor, as well as the simplest next-to-minimal model.

  20. Appendicite chronique chez les enfants

    PubMed Central

    Kim, David; Butterworth, Sonia A.; Goldman, Ran D.

    2016-01-01

    Résumé Question Alors que le diagnostic d’appendicite aigu est relativement simple à poser, celui d’appendicite chronique peut être controversé et souvent mal posé. De quelle manière et à quel moment les cliniciens devraient-ils investiguer l’appendicite chronique comme la cause de douleurs abdominales chroniques et récidivantes dans la population pédiatrique? Réponse L’appendicite chronique est une inflammation ou fibrose de longue date de l’appendice dont le tableau clinique est une douleur abdominale prolongée ou intermittente. Son diagnostic est souvent difficile à poser et elle peut entraîner des complications telles que des infections intra-abdominales, ou l’occlusion ou la perforation de l’intestin. Le tableau clinique, de même que les études d’imagerie, peuvent aider le clinicien à écarter d’autres affections, et chez les patients qui reçoivent un diagnostic, dont de nombreux enfants, l’appendicectomie soulage partiellement ou complètement la douleur.

  1. The phosphatic crusts from basalts of the Abrolhos Archipelago (Bahia, Brazil): rocks formed from guanos during the Late QuaternaryLes croûtes phosphatées des basaltes de l'archipel d'Abrolhos (Bahia, Brésil) : des roches formées au Quaternaire récent à partir de guanos

    NASA Astrophysics Data System (ADS)

    Flicoteaux, René; Melfi, Adolpho

    2000-02-01

    Basalts from the Abrolhos Archipelago are capped (1) by argilloferruginous saprolite formed under intense weathering conditions at the expense of the basalts and (2) by phosphatic leucophosphite and variscite-rich crusts developed at the expense of both saprolite and basalts. Phosphorus, as indicated by the associated organic compounds, is provided by the leaching of nitrogenous guanos. In the Siriba Island, the crusts affecting the basalts are overlain by a conglomerate related to the Quaternary transgressive-regressive phase at 5 100 years BP. Therefore, the leaching of the guanos certainly began before the transgression.

  2. Les etoiles qui ne veulent pas vieillir

    NASA Astrophysics Data System (ADS)

    Bonnet-Bidaud, J. M.

    1995-12-01

    Qu'est-ce qui fait courir Jean-Claude Pecker ? Ses travaux sur les atmospheres stellaires qu'il poursuit aujourd'hui ? Son combat pour les droits de l'homme, ou contre le sceau du secret qui pese encore sur la recherche fondamentale ? Tout a la fois. Pour cette figure emblematique de l'astrophysique francaise, aujourd'hui a la retraite, pas question de raccrocher les armes...

  3. Regard sur les lazarets en terre canadienne

    PubMed Central

    Milot, Jean

    2008-01-01

    Puisant dans les nombreuses références qu’offrent les publications médicales canadiennes du milieu du XIXe siècle à nos jours, l’auteur fait découvrir l’existence de lazarets en terre canadienne, décrit l’impact de la maladie sur les conditions vie des lépreux qui y étaient confinés et en souligne les contrecoups tant sur le plan physique et psychologique que social. Il présente un bref aperçu de la maladie, ses symptômes, ses signes ainsi que ses complications oculaires et rappelle les premiers moyens thérapeutiques à base d’huile de chaulmoogra introduits dans la colonie de Tracadie vers 1901. Il illustre son propos en évoquant la vie dans les lazarets de l’île de Sheldrake (1844–1848) et de Tracadie (1848–1965) au Nouveau-Brunswick, puis dans ceux des îles D’Arcy (1891–1924) et de Bentinck (1924–1957) en Colombie-Britannique. PMID:19352451

  4. Les fluctuations supraconductrices dans le compose praseodyme-cerium-oxyde de cuivre

    NASA Astrophysics Data System (ADS)

    Renaud, Jacques

    , les effets du desordre semblent etre tres importants. Une analyse detaillee de tous ces resultats semble indiquer que les signatures 2D in identifiees proviennent vraisemblablement de plans paralleles decouples formes d'environ 4 plans CuO2 couples. On discute de cette mise en ordre partielle comme une possible consequence d'une separation de phase isolante antiferromagnetique/supraconducteur. La largeur de la transition en fonction du dopage est aussi analysee dans le but de mettre en lumiere un possible effet du pseudogap. On montre que nos mesures ne supportent pas une telle interpretation.

  5. Les retractions cervicales post-brulure - a propos de 49 cas et revue de la litterature

    PubMed Central

    Elamrani, D.; Zahid, A.; Aboujaafr, N.; Diouri, M.; Bahechar, N.; Boukind, E.H.

    2011-01-01

    Summary Les brides cervicales post-brûlure sont la conséquence de brûlures profondes, souvent négligées ou mal prises en charge. Elles affectent la fonction, l’esthétique et l’état psychologique des patients et peuvent être de traitement difficile. A partir d’une étude rétrospective étalée sur une période de six ans (janvier 2002-janvier 2008), nous avons analysé les caractéristiques épidémiologiques et cliniques ainsi que les indications et les résultats thérapeutiques chez 49 patients présentant des brides cervicales post-brûlure, suivis au Centre National des Brûlés et de Chirurgie Plastique de Casablanca. L’enfant et l’adulte jeune sont les plus touchés, avec une légère prédominance féminine (59,2%). Les brûlures domestiques sont les plus fréquentes (93,9%) et l’étiologie de l’accident est dominée par la brûlure thermique (98,0%). Les brides cervicales modérées et sévères (selon la classification d’Achauer) sont les plus fréquentes et représentent respectivement 30,6% et 38,8% des cas. Le traitement chirurgical a fait appel aux greffes cutanées dans 67,3% des cas, aux plasties locales dans 24,5% des cas et aux lambeaux dans 8,2% des cas. Chez les 47 patients suivis à long terme, les résultats fonctionnels et esthétiques sont jugés bons dans 83,0% des cas et moyens dans 8,5% des cas, tandis que les cas restants (8,5%) ont nécessité une reprise chirurgicale. Sur le plan épidémiologique (âge, sexe, caractéristiques de la brûlure) et clinique (localisation des séquelles, formes cliniques), les résultats de notre série sont comparables aux données de la littérature. Le rôle de la prise en charge initiale (excision-greffe précoce, pressothérapie et immobilisation par minerve) dans la réduction de l’incidence et de la sévérité des séquelles de brûlures cervicales est prouvé. Lorsqu’un traitement chirurgical est indiqué, le choix du procédé de réparation dépend essentiellement de

  6. LES versus DNS: A comparative study

    NASA Technical Reports Server (NTRS)

    Shtilman, L.; Chasnov, J. R.

    1992-01-01

    We have performed Direct Numerical Simulations (DNS) and Large Eddy Simulations (LES) of forced isotropic turbulence at moderate Reynolds numbers. The subgrid scale model used in the LES is based on an eddy viscosity which adjusts instantaneously the energy spectrum of the LES to that of the DNS. The statistics of the large scales of the DNS (filtered DNS field or fDNS) are compared to that of the LES. We present results for the transfer spectra, the skewness and flatness factors of the velocity components, the PDF's of the angle between the vorticity and the eigenvectors of the rate of strain, and that between the vorticity and the vorticity stretching tensor. The above LES statistics are found to be in good agreement with those measured in the fDNS field. We further observe that in all the numerical measurements, the trend was for the LES field to be more gaussian than the fDNS field. Future research on this point is planned.

  7. Les Elements Legers: Diffusion dans les Enveloppes Stellaires et Implications Cosmologiques

    NASA Astrophysics Data System (ADS)

    Richer, Jacques

    1992-01-01

    Les observations des abondances des elements legers (Z <= 5) sont utilisees pour estimer la quantitie de lithium qui a ete produite lors du Big -Bang, et obtenir simultanement des contraintes sur la nature des inhomogeneites qui ont pu exister durant la nucleosynthese primordiale. Nous utilisons un modele simple capable de simuler approximativement la diffusion et la retro-diffusion des neutrons a travers la matiere inhomogene durant les premieres minutes de l'expansion de l'Univers. Nous tenons compte de la difference possible entre l'abondance primordiale de Li et les abondances observees dans les plus vieilles etoiles. Cette difference (un facteur 2, environ) est estimee en construisant des modeles evolutifs d'etoiles peu massives de Population II, incluant la sedimentation gravitationnelle du lithium et de l'helium. Ces modeles montrent egalement que les ages des vieux amas stellaires sont grandement surestimes lorsqu'ils sont determines a partir de modeles stellaires n'incluant pas l'effet de la diffusion de He. Nous calculons ensuite comment evoluent les abondances de Li et Be dans des etoiles plus massives et plus jeunes, de la pre-sequence principale ou de la ZAMS, jusqu'a l'epuisement de leur hydrogene central. Les modeles incluent la sedimentation simultanee de l'helium a travers l'enveloppe. Une approche hierarchique (evolution du coeur--evolution de l'enveloppe --tri des elements traces) est utilisee pour simuler efficacement le grand nombre d'etoiles necessaire pour la construction d'isochrones. Une attention particuliere est portee aux consequences de la sedimentation de He sur l'etendue des zones convectives, et sur la diffusion de Li et Be. Les forces radiatives agissant sur ces deux elements sont calculees en detail a partir des donnees atomiques. Les etoiles simulees correspondent approximativement aux types spectraux A, F, et AmFm. Les abondances de Li et Be observees dans les etoiles jeunes de ces types sont comparees a nos predictions dans le

  8. Altération des sulfures des granulats dans les chaussées

    NASA Astrophysics Data System (ADS)

    Jigorel, A.; Jauberthie, R.

    2002-07-01

    Sulfides present in hornsfeld aggregates, used in light pavanent construction in contact with humid air alter rapidly. Crystallisation of sulfates at the interface of bitumastic material and sub-base creates serious problems (intumescence and crazing) that can lead to a total reconstruction of the project (roads, sidewalks, sports areas, etc). The sulfides in the aggregates and the sulfates produced due to alteration are studied by SEM and XRD. The results show that the intensity of this phenomenon is linked to the nature and the crystallinity of the sulfides. The evolution of the sulfates formed during this alteration process is slow and complex. In new pavements (3 years) the sulfates have a pulverised appearance and consist mostly of epsomite, associated with pickeringite and halotrichite. In older pavements (20 years) the sulfates form a fibrous concretion consisting of pickeringite and small quantities of halotrichite. Les sulfures présents dans les granulats élaborés à partir de cornéen nes s'altèrent rapidement dans les chaussées légères en présence d'air humide. La cristallisation des sulfates à l'interface enrobé-couche de fondation crée des désordres si importants (intumescences, faiençage) qu'il est bien souvent nécessaire d'assurer la réfection totale des ouvrages (routes, trottoirs, plateaux sportifs...). Les sulfures des granulats et les sulfates issus du processus d'altération ont été étudiés par diffractométrie X et examen su Microscope Electronique à Balayage équipé de microanalyse X. Les résultats montrent que !intensité des désordres est liée à la nature et à la cristallinité des sulfures. Les sulfates formés évoluent su cours du processus d'altération qui est long et complexe. Dans les chaussées récentes (3 ans) ils ont un aspect pulvérulent et sont constitués d'epsomite dominante associée à de la pickeringite et à de l'halotrichite. Dans les chaussées plus anciennes (20 ans) ils forment des concr

  9. Prise en charge de l’infection gonococcique chez les adultes et les jeunes

    PubMed Central

    Pogany, Lisa; Romanowski, Barbara; Robinson, Joan; Gale-Rowe, Margaret; Latham-Carmanico, Cathy; Weir, Christine; Wong, Tom

    2015-01-01

    Résumé Objectif Présenter des recommandations sur la prise en charge de l’infection gonococcique chez les adultes et les jeunes. Qualité des données Les recommandations thérapeutiques des lignes directrices canadiennes sur les infections transmissibles sexuellement reposent sur une recherche documentaire de même que sur des catégories de recommandations et des niveaux de qualité de données déterminés par au moins 2 évaluateurs. Les recommandations ont été revues par des pairs et sont en instance d’approbation par le groupe de travail d’experts. Message principal Les nouvelles recommandations portant sur la prise en charge de l’infection gonococcique chez les adultes et les jeunes préconisent les cultures à titre d’outil diagnostique lorsqu’elles sont pratiques, le traitement par antibiothérapie combinée (ceftriaxone associée à l’azithromycine) et le signalement sans délai de tous les cas dont le traitement a échoué aux autorités de santé publique. Conclusion Si elles sont suivies, ces nouvelles recommandations pourraient réduire l’échec thérapeutique, contribuer à une surveillance plus étroite des tendances à la résistance de Neisseria gonorrhoeae aux antibiotiques et contribuer à prévenir la transmission de gonorrhée résistante à plusieurs médicaments.

  10. Theorie de la Levitation Radiative a L'equilibre dans les Etoiles Naines Blanches Chaudes

    NASA Astrophysics Data System (ADS)

    Chayer, Pierre

    1995-01-01

    Les resultats de nouveaux calculs detailles de levitation radiative dans des naines blanches chaudes utilisant la base de donnees atomiques TOPBASE sont presentes. Des accelerations radiatives et des abondances d'equilibre ont ete calculees pour C, N, O, Ne, Na, Mg, Al, Si, S, Ar, Ca, et Fe, sur des grilles de modeles d'enveloppes stellaires riches en hydrogene et riches en helium. La grille des modeles de DA a des gravites telles que log g = 7.0, 7.5, 8.0, et 8.5, et couvre les temperatures effectives pour lesquelles 100,000K >= T_ {rm eff} >= 20,000K par sauts de 2,500K. La grille des modeles de DO/DB est similaire mais se prolonge a T_{rm eff } = 130,000K. Les resultats d'abondances d'equilibre de Ni dans des DA utilisant la base de donnees de Kurucz sont aussi presentes. Nous discutons dans les moindres details de la physique incluse dans les calculs afin de fournir une bonne comprehension physique de la levitation radiative sous les conditions rencontrees dans les naines blanches. Nous discutons aussi de la forme et de la dependance en fonction de la profondeur des reservoirs des elements, crees par un equilibre entre l'acceleration radiative et la gravite locale effective dans differentes enveloppes stellaires. Nous soulignons le role important joue dans la morphologie de ces reserviors par les etats d'ionisation dominants se trouvant dans la configuration gaz noble. Nos resultats centraux sont presentes sous forme de figures montrant le comportement de l'abondance photospherique estimee pour chaque element en fonction de la temperature effective et de la gravite de surface. Nous apportons egalement des ameliorations aux calculs de levitation radiative en utilisant une approche de modeles d'atmospheres pour les etoiles riches en hydrogene. Nous mettons l'emphase, en particulier, sur le role des traces d'elements lourds qui peuvent etre presents dans le plasma. Nous utilisons une table d'opacite monochromatique detaillee calculee pour un plasma compose de H

  11. Les origines de l'astronomie chinoise

    NASA Astrophysics Data System (ADS)

    de Saussure, Léopold; Ferrand, Preface by Gabriel

    2015-05-01

    Préface; Le texte astronomique du Yao-Tien; 1. L'origine des 'sieou'; 2. Les cinq palais célestes; 3. La série quinaire et ses dérivés; 4. La série des douze 'tche'; 5. Le cycle des douze animaux; 6. La règle des 'cho-t'i'; 7. Le cycle de Jupiter; 8. Le cycle de Jupiter (suite); 9. Les anciennes étoiles polaires; 10. Le zodiaque lunaire.

  12. Form classification

    NASA Astrophysics Data System (ADS)

    Reddy, K. V. Umamaheswara; Govindaraju, Venu

    2008-01-01

    The problem of form classification is to assign a single-page form image to one of a set of predefined form types or classes. We classify the form images using low level pixel density information from the binary images of the documents. In this paper, we solve the form classification problem with a classifier based on the k-means algorithm, supported by adaptive boosting. Our classification method is tested on the NIST scanned tax forms data bases (special forms databases 2 and 6) which include machine-typed and handwritten documents. Our method improves the performance over published results on the same databases, while still using a simple set of image features.

  13. L’acétaminophène chez les enfants

    PubMed Central

    Goldman, Ran D.

    2013-01-01

    Résumé Question Je suggère fréquemment aux parents d’utiliser de l’acétaminophène comme traitement de la fièvre et de la douleur pour leurs enfants. J’ai récemment reçu un enfant à mon cabinet qui s’est présenté avec une éruption cutanée sous forme de lésions en cibles une journée après avoir pris de l’acétaminophène. L’éruption s’est résorbée 3 jours après qu’on ait arrêté l’administration d’acétaminophène. L’acétaminophène comporte-t-elle des risques d’événements indésirables comme celui-ci? Réponse Comme les autres médicaments ou substances actives, les préparations d’acétaminophène pourraient poser des risques d’événements indésirables. Au cours des dernières années, on a procédé à une investigation concernant une association potentielle entre l’acétaminophène et l’asthme et la Food and Drug Administration des États-Unis a récemment publié un avertissement à propos de réactions cutanées éventuelles, graves mais rares, associées à l’acétaminophène. Même si l’acétaminophène est principalement un médicament sûr, les professionnels de la santé devraient être alertes et informer les parents à propos de la possibilité d’événements indésirables rares mais sévères.

  14. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    SciTech Connect

    Clifford E. Smith

    2004-04-01

    Previous LES calculations for one SIMVAL case ({phi}{sub inj} = 0.7) have repeatedly shown that the heat transfer/heat losses were not correctly captured, resulting in predicted NO{sub x} emissions being much higher than measurements. In a current Navy Phase I SBIR project, we are studying ways to improve the prediction of heat transfer/heat loss in LES calculations. To improve our understanding of heat transfer at walls, a series of thermal channel flow cases were analyzed and compared to DNS predictions. When trying to fully resolve the boundary layer, it was found that the grid size in all directions (i.e. {Delta}x, {Delta}y, and {Delta}z) must be smaller than the size of eddies formed in the boundary layer. Thus, the cell aspect ratio at the wall needs to typically be less that 25 when the boundary layer is being resolved. In previous SIMVAL LES calculations, this cell aspect ratio requirement was not followed, and thus the heat transfer was less than desired. For this quarter, the grid was adjusted, and the SIMVAL case was rerun. The LES results show that vortices are now formed in the exhaust duct near the walls, resulting in more heat loss from the exhaust duct flow and lower NO{sub x} predictions (more in line with the measurements).

  15. Permission Forms

    ERIC Educational Resources Information Center

    Zirkel, Perry A.

    2005-01-01

    The prevailing practice in public schools is to routinely require permission or release forms for field trips and other activities that pose potential for liability. The legal status of such forms varies, but they are generally considered to be neither rock-solid protection nor legally valueless in terms of immunity. The following case and the…

  16. A New Formulation for Hybrid LES-RANS Computations

    NASA Technical Reports Server (NTRS)

    Woodruff, Stephen L.

    2013-01-01

    Ideally, a hybrid LES-RANS computation would employ LES only where necessary to make up for the failure of the RANS model to provide sufficient accuracy or to provide time-dependent information. Current approaches are fairly restrictive in the placement of LES and RANS regions; an LES-RANS transition in a boundary layer, for example, yields an unphysical log-layer shift. A hybrid computation is formulated here to allow greater control over the placement of LES and RANS regions and the transitions between them. The concept of model invariance is introduced, which provides a basis for interpreting hybrid results within an LES-RANS transition zone. Consequences of imposing model invariance include the addition of terms to the governing equations that compensate for unphysical gradients created as the model changes between RANS and LES. Computational results illustrate the increased accuracy of the approach and its insensitivity to the location of the transition and to the blending function employed.

  17. L'observance thérapeutique dans les dermatoses chroniques: à propos de 200 cas

    PubMed Central

    Amraoui, Nissrine; Gallouj, Salim; Berraho, Mohamed Amine; Najjari, Chakib; Mernissi, Fatima zohra

    2015-01-01

    Introduction L'observance thérapeutique est la capacité à prendre correctement son traitement, tel qu'il est prescrit par le médecin. Elle est peu étudiée en dermatologie. Méthodes Le but de notre étude est d’évaluer l'observance chez les patients suivis au service de dermatologie du Centre Hospitalier Universitaire Hassan II de Fès pour une dermatose chronique et de rechercher les facteurs liés à une mauvaise observance à travers une étude incluant 200 patients suivis depuis au moins 6 mois. L’évaluation de l'observance s'est faite essentiellement à l'aide d'un entretien et les facteurs liés à l'observance ont été recherchés par un questionnaire. Résultats 68% de nos patients étaient observant, la mauvaise observance était associée à un niveau socio économique et d’étude bas, à une vie solitaire, à une durée de suivi longue, aux effets secondaires et au coût élevé des traitements, à l'absence d'efficacité, à une faible visibilité des lésions, à une ordonnance complexe, à une explication faible de la maladie, et à des difficultés d'accès à la consultation. Le taux d'observance retrouvé dans notre étude est un taux satisfaisant selon les données de la littérature, notre étude a confirmée certaines facteurs connues et a mis le point sur d'autres facteurs peu étudiés tel un traitement traditionnel associé, la part de chaque forme de traitement dans le respect de l'ordonnance, les dermatoses les plus touchées par les difficulté d'observance a savoir les dermatoses bulleuses et le psoriasis, et l'intérêt du pharmacien. Conclusion Cette analyse de la fréquence de ce phénomène et des facteurs essentiels qui l'influencent permet de cibler la prise en charge à travers une personnalisation de l'entretien médical, une adaptation du suivi au contexte de nos patients et à la nature de notre institution de santé. PMID:26848363

  18. Les Troubles Respiratoires Chez Le Brule

    PubMed Central

    Fassi Fihri, J.; Ezzoubi, M.; Boukind, E.H.

    2010-01-01

    Summary A travers une revue de la littérature, cet article se propose d'exposer les particularités des troubles respiratoires chez le brûlé. Ces troubles sont liés à un mécanisme direct, lorsque l'arbre respiratoire est lésé par le transfert d'énergie thermique du à la brûlure et/ou par un mécanisme indirect, lorsque la fonction respiratoire et ventilatoire du poumon est perturbée par les phénomènes loco-régionaux ou généraux du brûlé. Ces troubles respiratoires sont aggravés par l'inhalation des gaz contenus dans la fumée d'incendie. Le diagnostic de ces troubles est clinique et paraclinique. Il doit être précoce et continu. Les patients nécessitent de différents moyens thérapeutiques tels que l'oxygénothérapie, la libération des voies respiratoires, l'amélioration de la mécanique ventilatoire et de la fonction respiratoire, l'antibiothérapie ou la chirurgie des séquelles. Cette prise en charge doit nécessairement être multidisciplinaire. PMID:21991224

  19. Les abcès froids pariétaux thoraciques chez les sujets immunocompétents

    PubMed Central

    Benjelloun, Hanane; Morad, Sanaa; Zaghba, Nahid; Bakhatar, Abdelaziz; Yassine, Najiba; Bahlaoui, Abdelkrim

    2015-01-01

    Les abcès froids de la paroi thoracique représentent une forme rare et inhabituelle de tuberculose extrapulmonaire. Sa fréquence est estimée à moins de 5% des tuberculoses ostéoarticulaires, évaluées elles-mêmes à 15% des tuberculoses extrapulmonaires. L'objectif de ce travail est de rapporter la prise en charge diagnostique et thérapeutique de cette localisation dans notre structure. Etude rétrospective portant sur 18 cas colligés au service des maladies respiratoires du centre hospitalier universitaire Ibn Rochd de Casablanca, sur une période de 13 ans. La moyenne d’âge était de 34 ans (21-57). Un antécédent de tuberculose traitée était relevé dans un cas. Le tableau clinique était révélé par l'apparition insidieuse d'une masse pariétale de taille, de consistance et de siège variables. A l'imagerie thoracique, l'abcès pariétal était associé à une lyse osseuse dans sept cas, une atteinte parenchymateuse et pleurale dans quatre cas chacune et des adénopathies médiastinales dans deux cas. La confirmation diagnostique était bactériologique et/ou histologique dans tous les cas. La sérologie du virus de l'immunodéficience humaineétait négative chez tous nos malades. L’évolution sous traitement antibacillaire couplé ou non à une résection chirurgicale était favorable chez tous nos malades. Malgré la fréquence de la tuberculose dans notre contexte, la localisation pariétale thoracique reste rare, survenant chez une population non immunodéprimée et non toxicomane, contrairement à ce qui est souvent rapporté dans la littérature. Les abcès froids tuberculeux représentent une forme rare de tuberculose extrapulmonaire dont l’évolution reste favorable sous traitement précoce et bien conduit. PMID:26113904

  20. Assessing the Validity of the Quality of Life Enjoyment and Satisfaction Questionnaire--Short Form in Adults with ADHD

    ERIC Educational Resources Information Center

    Mick, Eric; Faraone, Stephen V.; Spencer, Thomas; Zhang, Huabin F.; Biederman, Joseph

    2008-01-01

    Objective: The authors assessed the psychometric properties of the Quality of Life Enjoyment and Satisfaction Questionnaire-Short Form (Q-LES-QSF) in adults with ADHD. Method: One hundred fifty ADHD and 134 non-ADHD adults from a case-control study and 173 adults randomized to placebo or methylphenidate were assessed with the Q-LES-QSF and the…

  1. LES/RANS Simulation of a Supersonic Reacting Wall Jet

    NASA Technical Reports Server (NTRS)

    Edwards, Jack R.; Boles, John A.; Baurle, Robert A.

    2010-01-01

    This work presents results from large-eddy / Reynolds-averaged Navier-Stokes (LES/RANS) simulations of the well-known Burrows-Kurkov supersonic reacting wall-jet experiment. Generally good agreement with experimental mole fraction, stagnation temperature, and Pitot pressure profiles is obtained for non-reactive mixing of the hydrogen jet with a non-vitiated air stream. A lifted flame, stabilized between 10 and 22 cm downstream of the hydrogen jet, is formed for hydrogen injected into a vitiated air stream. Flame stabilization occurs closer to the hydrogen injection location when a three-dimensional combustor geometry (with boundary layer development resolved on all walls) is considered. Volumetric expansion of the reactive shear layer is accompanied by the formation of large eddies which interact strongly with the reaction zone. Time averaged predictions of the reaction zone structure show an under-prediction of the peak water concentration and stagnation temperature, relative to experimental data and to results from a Reynolds-averaged Navier-Stokes calculation. If the experimental data can be considered as being accurate, this result indicates that the present LES/RANS method does not correctly capture the cascade of turbulence scales that should be resolvable on the present mesh. Instead, energy is concentrated in the very largest scales, which provide an over-mixing effect that excessively cools and strains the flame. Predictions improve with the use of a low-dissipation version of the baseline piecewise parabolic advection scheme, which captures the formation of smaller-scale structures superimposed on larger structures of the order of the shear-layer width.

  2. Towards LES Models of Jets and Plumes

    NASA Technical Reports Server (NTRS)

    Webb, A. T.; Mansour, N. N.

    2000-01-01

    As pointed out by Rodi standard integral solutions for jets and plumes developed for discharge into infinite, quiescent ambient are difficult to extend to complex situations, particularly in the presence of boundaries such as the sea floor or ocean surface. In such cases the assumption of similarity breaks down and it is impossible to find a suitable entrainment coefficient. The models are also incapable of describing any but the most slowly varying unsteady motions. There is therefore a need for full time-dependent modeling of the flow field for which there are three main approaches: (1) Reynolds averaged numerical simulation (RANS), (2) large eddy simulation (LES), and (3) direct numerical simulation (DNS). Rodi applied RANS modeling to both jets and plumes with considerable success, the test being a match with experimental data for time-averaged velocity and temperature profiles as well as turbulent kinetic energy and rms axial turbulent velocity fluctuations. This model still relies on empirical constants, some eleven in the case of the buoyant jet, and so would not be applicable to a partly laminar plume, may have limited use in the presence of boundaries, and would also be unsuitable if one is after details of the unsteady component of the flow (the turbulent eddies). At the other end of the scale DNS modeling includes all motions down to the viscous scales. Boersma et al. have built such a model for the non-buoyant case which also compares well with measured data for mean and turbulent velocity components. The model demonstrates its versatility by application to a laminar flow case. As its name implies, DNS directly models the Navier-Stokes equations without recourse to subgrid modeling so for flows with a broad spectrum of motions (high Re) the cost can be prohibitive - the number of required grid points scaling with Re(exp 9/4) and the number of time steps with Re(exp 3/4). The middle road is provided by LES whereby the Navier-Stokes equations are formally

  3. Les enjuex éthiques entourant la recherche en santé sur les enfants

    PubMed Central

    2008-01-01

    RÉSUMÉ La recherche en santé est un devoir moral parce qu’elle est la base des soins probants prodigués par tous les dispensateurs de soins. Des politiques et des règlements précis régissent la tenue des recherches sur des humains. Il faut procéder à une évaluation éthique d’un projet de recherche donné avant de pouvoir l’entreprendre. La recherche sur les enfants pose d’énormes défis en matière de consentement éclairé et d’assentiment, de vulnérabilité et de potentiel de conflit d’intérêts (CDI). Les chercheurs en santé pédiatrique devraient prôner la participation des enfants à la recherche, tout en se montrant attentifs à en limiter les risques.

  4. Inhibiteurs de la pompe à protons pour les nourrissons irritables

    PubMed Central

    Smith, Christine H.; Israel, David M.; Schreiber, Richard; Goldman, Ran D.

    2013-01-01

    Résumé Question Les pleurs sont communs chez les nourrissons; par ailleurs, prendre soin d'un nourrisson dont les pleurs sont inconsolables et qu'on surnommait aussi auparavant des coliques ou un reflux, peut souvent causer une détresse extrême aux parents. Le recours à un agent de suppression de l'acide gastrique (p. ex. les inhibiteurs de la pompe à protons [IPP]) est-il bénéfique chez ces nourrissons? Réponse On utilise de plus en plus les IPP chez les nourrissons et les enfants depuis quelques années. L'efficacité des inhibiteurs de la pompe à protons n'a pas été démontrée dans le traitement de l'irritabilité et des pleurs excessifs chez des enfants autrement en santé de moins de 3 mois. D'autre part, si les IPP sont généralement bien tolérés, il existe certaines données probantes reliant l'utilisation des IPP avec une susceptibilité accrue aux gastroentérites aiguës, à la pneumonie acquise dans la communauté et à des troubles de l'utilisation et de l'absorption des nutriments. Indépendamment des traitements, les pleurs et l'irritabilité durant la tendre enfance s'améliorent généralement avec le temps. Entre-temps, les inhibiteurs de la pompe à protons n'améliorent pas les symptômes.

  5. La stigmatisation des PVVIH en Afrique: analyse de ses formes et manifestations au Burkina Faso

    PubMed Central

    Ky-Zerbo, Odette; Desclaux, Alice; Asmar, Khalil El; Makhlouf-Obermeyer, Carla; Msellati, Philippe; Somé, Jean-François

    2014-01-01

    Résumé Introduction l’impact négatif de la stigmatisation sur la prévention du VIH et la prise en charge a été documenté. La stigmatisation a été analysée au plan qualitatif au Burkina Faso, où la prévalence VIH est faible (1 %). Des mesures quantitatives sont encore nécessaires pour identifier les formes et manifestations majeures de la stigmatisation. Méthodologie dans le cadre de l’étude MATCH (Multi-country African Study on Testing and Counselling for HIV), une étude transversale a été conduite auprès de personnes ayant déjà fait le test VIH. Les personnes séropositives ont été interrogées sur les conséquences du résultat VIH+. Leur vécu de la stigmatisation a été évalué à travers 20 indicateurs de manifestations de la stigmatisation, regroupés en trois formes de stigmatisation/discrimination. Résultats au total 219 PVVIH ont été recrutées. L’autostigmatisation est la forme majeure de stigmatisation. Elle est estimée dans cette étude à 46 % comparativement à la stigmatisation dans les relations interpersonnelles évaluée à 40 % et la stigmatisation dans les services de santé qui est de 11 %. L’expérience de la stigmatisation dans les relations interpersonnelles est davantage rapportée par les PVVIH qui ont partagé leur résultat, celles qui ont un faible niveau de scolarisation, les veufs/veuves ou séparés, et les membres d’association. La stigmatisation dans les services de santé est rapportée plus souvent par les membres d’associations. Conclusion les programmes de prise en charge doivent, parallèlement à l’extension des antirétroviraux, intégrer un volet psychologique plus adapté aux besoins. Les activités d’appui psychosocial ciblant davantage l’individu doivent être développées, surtout au sein des associations. PMID:25291886

  6. Analysis of discretization errors in LES

    NASA Technical Reports Server (NTRS)

    Ghosal, Sandip

    1995-01-01

    All numerical simulations of turbulence (DNS or LES) involve some discretization errors. The integrity of such simulations therefore depend on our ability to quantify and control such errors. In the classical literature on analysis of errors in partial differential equations, one typically studies simple linear equations (such as the wave equation or Laplace's equation). The qualitative insight gained from studying such simple situations is then used to design numerical methods for more complex problems such as the Navier-Stokes equations. Though such an approach may seem reasonable as a first approximation, it should be recognized that strongly nonlinear problems, such as turbulence, have a feature that is absent in linear problems. This feature is the simultaneous presence of a continuum of space and time scales. Thus, in an analysis of errors in the one dimensional wave equation, one may, without loss of generality, rescale the equations so that the dependent variable is always of order unity. This is not possible in the turbulence problem since the amplitudes of the Fourier modes of the velocity field have a continuous distribution. The objective of the present research is to provide some quantitative measures of numerical errors in such situations. Though the focus of this work is LES, the methods introduced here can be just as easily applied to DNS. Errors due to discretization of the time-variable are neglected for the purpose of this analysis.

  7. Advanced Supersonic Nozzle Concepts: Experimental Flow Visualization Results Paired With LES

    NASA Astrophysics Data System (ADS)

    Berry, Matthew; Magstadt, Andrew; Stack, Cory; Gaitonde, Datta; Glauser, Mark; Syracuse University Team; The Ohio State University Team

    2015-11-01

    Advanced supersonic nozzle concepts are currently under investigation, utilizing multiple bypass streams and airframe integration to bolster performance and efficiency. This work focuses on the parametric study of a supersonic, multi-stream jet with aft deck. The single plane of symmetry, rectangular nozzle, displays very complex and unique flow characteristics. Flow visualization techniques in the form of PIV and schlieren capture flow features at various deck lengths and Mach numbers. LES is compared to the experimental results to both validate the computational model and identify limitations of the simulation. By comparing experimental results to LES, this study will help create a foundation of knowledge for advanced nozzle designs in future aircraft. SBIR Phase II with Spectral Energies, LLC under direction of Barry Kiel.

  8. Les mémoires de la dynastie Tang

    NASA Astrophysics Data System (ADS)

    Bonnet-Bidaud, J. M.

    1996-07-01

    Dans la nuit des temps, les astronomes chinois ont ete d'incomparables observateurs de cometes. Ces savants, dont les notations raffinees ponctuaient l'histoire officielle des empereurs, relevaient chaque passage d'astre errant avec une precision inestimable. Un veritable tresor ou puise encore la science contemporaine.

  9. La Terre - les eaux - l'atmosphère.

    NASA Astrophysics Data System (ADS)

    Bec-Borsenberger, A.; Catoire, M.; Kovalevsky, J.; Guinot, B.; Cazenave, A.; Levallois, J. J.; Lecolazet, R.; Jobert, G.; Francheteau, J.; Le Mouël, J.-L.; Goguel, J.; Serpolay, R.; Berroir, A.; Mégie, G.; Crépon, M.; Saint-Guily, B.; Eyriès, M.-M.; Ramamonjiarisoa, A.; Buat-Menard, P.; Lalou, C.; Serra, L.; Lliboutry, L.; Lorius, C.

    Contents: Repères et forces de gravité (J. Kovalevsky). La rotation de la Terre (B. Guinot). La géodésie (J. Kovalevsky, A. Cazenave, J. J. Levallois). Les marées terrestres (R. Lecolazet). La sismologie (G. Jobert). Lithosphère et tectonique des plaques (J. Francheteau). Le champ magnétique terrestre (J.-L. Le Mouël). Modèles de la constitution physique de la Terre (G. Jobert). La géothermie (J. Goguel). Le rayonnement énergétique (R. Serpolay). Les fluides géophysiques (A. Berroir). L'atmosphère (A. Berroir, R. Serpolay). L'ozonosphère (G. Mégie). Les océans en mouvement (M. Crépon, B. Saint-Guily). La marée océanique (M.-M. Eyriès). La houle et les vagues (A. Ramamonjiarisoa). Les cycles géochimiques dans l'océan (P. Buat-Menard, C. Lalou). La circulation des eaux (L. Serra). Les glaces naturelles et leur dynamique (L. Lliboutry). L'évolution des climats, les données du passé (C. Lorius).

  10. Le sumatriptan intranasal pour la migraine chez les enfants

    PubMed Central

    Goldman, Ran D.; Meckler, Garth D.

    2015-01-01

    Résumé Question Je vois de plus en plus d’enfants et d’adolescents qui souffrent de céphalées pouvant se classer dans la catégorie des migraines. J’ai fait des lectures sur le sumatriptan par voie intranasale comme thérapie abortive. Est-ce un traitement efficace? Réponse La migraine aiguë chez les enfants et les adolescents est fréquente et difficile à traiter. Le sumatriptan intranasal est une option sûre et généralement efficace pour les enfants et les adolescents. La dose actuellement recommandée est de 20 mg pour les enfants qui pèsent plus de 40 kg et de 10 mg pour ceux dont le poids se situe entre 20 et 39 kg. Il faudrait faire des études de plus grande envergure pour contrecarrer les limitations des échantillons de petite taille et mieux comprendre la faible concentration plasmique et les effets placebo observés dans les études jusqu’à présent.

  11. Naines blanches : Les diamants sont éternels

    NASA Astrophysics Data System (ADS)

    Bonnet-Bidaud, J. M.

    1997-08-01

    Ces etoiles minuscules, composantes essentielles de la Galaxie, sont responsables de phenomenes spectaculaires, comme les novae ou certaines supernovae. Mais les naines blanches se sont aussi revelees un fantastique outil pour la physique du XXe siecle, fournissant des confirmations eclatantes de deux grandes theories: la relativite generale et la mecanique quantique.

  12. Tidal Forms

    NASA Astrophysics Data System (ADS)

    Bolla Pittaluga, M.; Seminara, G.; Tambroni, N.

    2003-04-01

    We give an overview of some recent investigations on the mechanics of the processes whereby forms develop in tidal environments. The viewpoint taken here is mechanistic. Some of the questions which deserve an answer may be summarised as follows: i) do tidal channels tend to some altimetric long term equilibrium? ii) why are they typically convergent and weakly meandering? iii) how is such equilibrium affected by the hydrodynamics and morphodynamics of tidal inlets? iv) what is the hydrodynamic and morphodynamic role played by tidal flats adjacent to the channels? Some of the above questions have received a considerable attention in the last few years. Schuttelaars and de Swart (1996), Lanzoni and Seminara (2002) and, more recently, Bolla Pittaluga (2003) have investigated the first problem. In particular, the latter two contributions have shown that a straight tidal channel connected to a tidal sea at one end and closed at the other end tends to reach a long term equilibrium profile, which is slightly concave seaward and convex landward where a beach forms. The equilibrium profile is strongly sensitive to the harmonic content of the tidal forcing as well as to the value of sediment concentration established by the coastal hydrodynamics in the far field of the inlet region. Less important are the effect of channel convergence and the role of settling lag in the transport of suspended load. Insufficient attention has been devoted to the understanding of what mechanisms control channel convergence and meandering, though some similarities and differences between tidal and fluvial channels have emerged from some recent works. In particular, free bars form in tidal channels due to an instability mechanism essentially similar to that occurring under steady conditions though the oscillatory character of the flow field makes the bar pattern non migrating (Seminara and Tubino, 2001). Similarly, forced bars in curved tidal channels are driven by the development of

  13. Les superpolynomes symetriques dans les problemes a plusieurs corps de la mecanique quantique supersymetrique

    NASA Astrophysics Data System (ADS)

    Desrosiers, Patrick

    S'inspirant de la supersymetrie, on construit dans cette these une nouvelle generalisation de la theorie des fonctions symetriques. Une theorie physique est supersymetrique si: (1) elle contient des bosons (particules de spin entier) et des fermions (particules de spin demi-entier); (2) elle reste inchangee suite a une transformation des bosons en fermions et vice versa. Les fonctions symetriques dans le superespace (superfonctions symetriques) incorporent a la fois des variables commutatives (bosoniques) et anticommutatives (fermioniques). Ces dernieres engendrent une algebre de Grassmann. Une superfonction symetrique est invariante sous l'echange simultane des variables bosoniques et fermioniques (action diagonale du groupe symetrique); elle se caracterise par une superpartition, i.e., une juxtaposition appropriee de partitions usuelles d'entiers non negatifs. On utilise deux approches dans l'elaboration de la theorie des superfonctions symetriques: l'une provient de la combinatoire et l'autre, de la physique. Suivant la premiere approche, on obtient l'extension des elements standards de la theorie des fonctions symetriques fonctions monomiales, fonctions symetriques elementaires, fonctions completement symetriques, series de puissances, fonctions generatrices et formules de Cauchy. On demontre egalement qu'il existe une extension naturelle, a un parametre, du produit scalaire combinatoire defini par l'orthogonalite des series de puissances dans le superespace. La seconde approche consiste a resoudre des problemes a N corps de la mecanique quantique supersymetrique. On etudie les extensions supersymetriques des modeles Calogero-Moser-Sutherland (CMS), lesquels decrivent l'evolution de particules dont le potentiel d'inter action est proportionnel a l'inverse du carre de la distance separant les particules. Deux modeles supersymetriques CMS sont resolus: trigonometrique (sur un cercle) et rationnel (sur une ligne) avec confinement harmonique. Leurs fonctions d

  14. LES of propelled bodies in crashback

    NASA Astrophysics Data System (ADS)

    Kumar, Praveen; Mahesh, Krishnan

    2015-11-01

    Crashback is an off-design operating condition to quickly stop a propelled vehicle by rotating the propeller in reverse direction, thus yielding a negative thrust. The interaction of the freestream with the strong reverse flow from the propeller creates massive unsteadiness and flow separation. This talk will discuss our work towards simulation of crashback flow over an entire hull using Large-Eddy Simulation (LES).The results will be compared to the available experimental data and the flow physics will be discussed. The flowfield of the hull-attached propeller in crashback will be analyzed using dynamic mode decomposition to understand the mechanism of the unsteady loads. This work is supported by the Office of Naval Research.

  15. Massively parallel LES of azimuthal thermo-acoustic instabilities in annular gas turbines

    NASA Astrophysics Data System (ADS)

    Wolf, P.; Staffelbach, G.; Roux, A.; Gicquel, L.; Poinsot, T.; Moureau, V.

    2009-06-01

    Increasingly stringent regulations and the need to tackle rising fuel prices have placed great emphasis on the design of aeronautical gas turbines, which are unfortunately more and more prone to combustion instabilities. In the particular field of annular combustion chambers, these instabilities often take the form of azimuthal modes. To predict these modes, one must compute the full combustion chamber, which remained out of reach until very recently and the development of massively parallel computers. In this article, full annular Large Eddy Simulations (LES) of two helicopter combustors, which differ only on the swirlers' design, are performed. In both computations, LES captures self-established rotating azimuthal modes. However, the two cases exhibit different thermo-acoustic responses and the resulting limit-cycles are different. With the first design, a self-excited strong instability develops, leading to pulsating flames and local flashback. In the second case, the flames are much less affected by the azimuthal mode and remain stable, allowing an acceptable operation. Hence, this study highlights the potential of LES for discriminating injection system designs. To cite this article: P. Wolf et al., C. R. Mecanique 337 (2009).

  16. LES/FMDF of turbulent jet ignition in a rapid compression machine

    NASA Astrophysics Data System (ADS)

    Validi, Abdoulahad; Schock, Harold; Toulson, Elisa; Jaberi, Farhad; CFD; Engine Research Labs, Michigan State University Collaboration

    2015-11-01

    Turbulent Jet Ignition (TJI) is an efficient method for initiating and controlling combustion in combustion systems, e.g. internal combustion engines. It enables combustion in ultra-lean mixtures by utilizing hot product turbulent jets emerging from a pre-chamber combustor as the ignition source for the main combustion chamber. Here, we study the TJI-assisted ignition and combustion of lean methane-air mixtures in a Rapid Compression Machine (RCM) for various flow/combustion conditions with the hybrid large eddy simulation/filtered mass density function (LES/FMDF) computational model. In the LES/FMDF model, the filtered form of compressible Navier-Stokes equations are solved with a high-order finite difference scheme for the turbulent velocity, while the FMDF transport equation is solved with a Lagrangian stochastic method to obtain the scalar (species mass fraction and temperature) field. The LES/FMDF data are used to study the physics of TJI and combustion in RCM. The results show the very complex behavior of the reacting flow and the flame structure in the pre-chamber and RCM.

  17. DNS and LES/FMDF of turbulent jet ignition and combustion

    NASA Astrophysics Data System (ADS)

    Validi, Abdoulahad; Jaberi, Farhad

    2014-11-01

    The ignition and combustion of lean fuel-air mixtures by a turbulent jet flow of hot combustion products injected into various geometries are studied by high fidelity numerical models. Turbulent jet ignition (TJI) is an efficient method for starting and controlling the combustion in complex propulsion systems and engines. The TJI and combustion of hydrogen and propane in various flow configurations are simulated with the direct numerical simulation (DNS) and the hybrid large eddy simulation/filtered mass density function (LES/FMDF) models. In the LES/FMDF model, the filtered form of the compressible Navier-Stokes equations are solved with a high-order finite difference scheme for the turbulent velocity and the FMDF transport equation is solved with a Lagrangian stochastic method to obtain the scalar field. The DNS and LES/FMDF data are used to study the physics of TJI and combustion for different turbulent jet igniter and gas mixture conditions. The results show the very complex and different behavior of the turbulence and the flame structure at different jet equivalence ratios.

  18. Numerical and physical instabilities in massively parallel LES of reacting flows

    NASA Astrophysics Data System (ADS)

    Poinsot, Thierry

    LES of reacting flows is rapidly becoming mature and providing levels of precision which can not be reached with any RANS (Reynolds Averaged) technique. In addition to the multiple subgrid scale models required for such LES and to the questions raised by the required numerical accurcay of LES solvers, various issues related the reliability, mesh independence and repetitivity of LES must still be addressed, especially when LES is used on massively parallel machines. This talk discusses some of these issues: (1) the existence of non physical waves (known as `wiggles' by most LES practitioners) in LES, (2) the effects of mesh size on LES of reacting flows, (3) the growth of rounding errors in LES on massively parallel machines and more generally (4) the ability to qualify a LES code as `bug free' and `accurate'. Examples range from academic cases (minimum non-reacting turbulent channel) to applied configurations (a sector of an helicopter combustion chamber).

  19. Updrafts, Downdrafts, Entrainment, and Detrainment in the Giga-LES

    NASA Astrophysics Data System (ADS)

    Krueger, S. K.; Glenn, I.

    2012-12-01

    We are investigating the properties of evolving three-dimensional updraft and downdraft "cores" in a model dataset from the Giga-LES, a large-domain LES (large-eddy simulation) of tropical oceanic deep convection (Khairoutdinov et al. 2009). We have also applied the analysis method developed by Kuang and Bretherton (2006) to investigate various aspects of the ensemble characteristics of cumulus convection in the Giga-LES. Our results agree with those of Kuang and Bretherton for the cumulus updraft properties. We have examined the relative merits of different entrainment and cloud-top-height assumptions in spectral plume models of cumulus updrafts, the characteristics of downdrafts, and the nature of a rapid transition from shallow to deep convection.isualization of cumulus clouds from the Giga-LES. The realistic structure is associated with entrainment.

  20. Ressources pour les personnes atteintes de démence

    PubMed Central

    Frank, Christopher; Feldman, Sid; Schulz, Mary

    2011-01-01

    Résumé Objectif Résumer les services offerts par la Société Alzheimer et discuter des autres sources de soutien et d’information à la disposition des personnes atteintes de démence. Sources de l’information On a fait une recension dans Ovid MEDLINE à l’aide des expressions dementia, Alzheimer disease, community health services utilization et caregiver stress. Message principal Il a été démontré qu’il est bénéfique aux patients et aux aidants si le diagnostic de la démence est posé tôt dans la maladie. Une consultation auprès de la Société Alzheimer peut aider dans la prise en charge non pharmacologique de la démence au moment du diagnostic et en tout temps durant l’évolution de la maladie. Parmi les services offerts, on peut mentionner des renseignements au sujet de la démence, le soutien aux aidants, la coordination des services communautaires et une grande diversité de ressources écrites à l’intention des patients et des aidants. Là où il est offert, le programme Premier lien peut aider avec l’orientation vers des services en minimisant la nécessité pour les patients ou les aidants de communiquer eux-mêmes avec les filiales locales de la Société. On discute aussi d’autres ressources, y compris les soins de répit et les approches technologiques pour prendre en charge l’errance. Conclusion La Société Alzheimer joue un rôle important dans la prise en charge de la démence et les médecins de famille devraient toujours envisager d’y référer leurs patients au moment du diagnostic, quelle que soit la gravité de l’état. Premier lien, quand il est accessible, peut faciliter le contact avec les services. Des ressources comme les soins de répit et les programmes de jour devraient toujours être considérés lorsqu’ils sont disponibles.

  1. Coupling Turbulence in Hybrid LES-RANS Techniques

    NASA Technical Reports Server (NTRS)

    Woodruff, Stephen L.

    2011-01-01

    A formulation is proposed for hybrid LES-RANS computations that permits accurate computations during resolution changes, so that resolution may be changed at will in order to employ only as much resolution in each subdomain as is required by the physics. The two components of this formulation, establishing the accuracy of a hybrid model at constant resolutions throughout the RANS-to-LES range and maintaining that accuracy when resolution is varied, are demonstrated for decaying, homogeneous, isotropic turbulence.

  2. Progress on LES of Flow Past a Circular Cylinder

    NASA Technical Reports Server (NTRS)

    Mittal, R.

    1996-01-01

    The objective of the present research is to assess the usefulness of large-eddy simulation (LES) methodology for flows in complex geometries. Flow past a circular cylinder has been calculated using a central-difference based solver, and the results have been compared to those obtained by a solver that employs higher-order upwind biased schemes (Beaudan & Moin, 1994). This comparison allows us to assess the suitability of these schemes for LES in complex geometry flows.

  3. Etude des phenomenes de penetration des especes chimiques dans les revetements cathodiques des cuves d'electrolyse de l'aluminium

    NASA Astrophysics Data System (ADS)

    Brisson, Pierre-Yves

    Cette these decrit l'etude effectuee sur les phenomenes d'insertion du sodium et de penetration du bain electrolytique dans les revetements cathodiques des cuves d'electrolyse de l'aluminium. L'etude fut effectuee a l'aide d'un montage permettant d'effectuer l'electrolyse en laboratoire. Trois types de revetement cathodiques furent etudies : des blocs semi-graphitique, des blocs graphitiques et des blocs graphitises. L'insertion du sodium dans les trois differents types de blocs fut etudiee a l'aide de la spectrometrie des photoelectrons X (XPS). L'analyse a permis de mettre en evidence deux formes de sodium dans l'anthracite et la phase liante des materiaux semi-graphitiques et graphitiques, indiquant qu'une fraction du sodium se retrouve sous forme adsorbee dans les micropores des materiaux alors que l'autre fraction est inseree dans la structure cristalline du carbone. Dans les phases graphitiques (materiaux graphitises et graphitiques), seuls les micropores sont occupes par le sodium Ce resultat explique la tendance observee selon laquelle l'ajout de graphite dans les blocs permet d'abaisser le gonflement sodique. Les mecanismes de penetration du bain dans le reseau poreux des materiaux furent etudies en microscopie electronique et en diffraction des rayons X sur des echantillons apres differents temps d'electrolyses et en variant l'atmosphere (soit sous argon ou sous azote). Ces analyses ont permis d'identifier le mecanisme conduisant a la mouillabilite du bain sur le carbone en fonction de l'atmosphere entourant l'electrolyse. Ainsi, sous azote, la formation de NaCN dans les pores des materiaux par reactions entre le sodium et l'azote permet une mouillabilite accrue du bain alors qu'en absence d'azote (sous argon), le carbure d'aluminium, formes a la surface des pores, joue un role similaire. Dans ce dernier cas, la penetration du bain est moins rapide etant donnee la necessite de toujours amener des especes contenant de l'aluminium en tete du front de

  4. Densified waste form and method for forming

    DOEpatents

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2016-05-17

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  5. Densified waste form and method for forming

    SciTech Connect

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2015-08-25

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  6. Les cellulites cervico-faciales graves, facteurs et critères de gravité

    PubMed Central

    Lakouichmi, Mohammed; Tourabi, Khalid; Abir, Bader-eddine; Zouhair, Said; Lahmiti, Saad; Hattab, Nadia Mansouri

    2014-01-01

    La cellulite cervico-faciale grave est une infection polymicrobienne extensive et redoutable du tissu cellulo-adipeux de la face et du cou. L'objectif de cette étude est d'analyser certains facteurs favorisants et d’évaluer les critères de gravité en fonction des formes anatomo-cliniques. Il s'agit d'une étude rétrospective réalisée, entre janvier 2007 et décembre 2012, au service de chirurgie maxillo faciale de l'hôpital militaire Avicenne de Marrakech. Sur 147 cas de cellulites cervico-faciales pris en charge au niveau du service, 13 dossiers de cellulites graves ont été retenus. Neuf hommes (69%) et quatre femmes (31%) ont fait l'objet de cette étude, avec un âge moyen de 35 ans. Tous les patients ont été adressés pour prise en charge secondaire après avoir pris des anti-inflammatoires (AI). Sept cas (54%) étaient immunocompétents. La cause dentaire était soulevée chez neufs cas (69%). Cinq cas (38%) ont présenté une forme pseudo phlegmoneuse avec des signes compressifs des voies aéro-digestives. L'extension médiastinale a été observée chez quatre patients (31%). La forme nécrosante extensive a été retrouvée dans trois cas (23%). L’étude bactériologique, réalisée chez tous les patients, avait mis en évidence une flore microbienne mixte et polymorphe. Les cellulites cervico-faciales graves posent un réel problème de prise en charge thérapeutique. L'analyse des facteurs favorisants et l’évaluation des critères de gravité dans cette série ont permis de limiter une évolution défavorable. PMID:26113891

  7. Ventilatory impairment in the dysmyelinated Long Evans shaker (les) rat

    PubMed Central

    Johnson, Rebecca A.; Baker-Herman, Tracy L.; Duncan, Ian D.; Mitchell, Gordon S.

    2010-01-01

    Although respiratory complications significantly contribute to morbidity/mortality in advanced myelin disorders, little is known concerning mechanisms whereby dysmyelination impairs ventilation, or how patients compensate (i.e. plasticity). To establish a model for studies concerning mechanisms of ventilatory impairment/compensation, we tested the hypotheses that respiratory function progressively declines in a model of CNS dysmyelination, the Long Evans shaker rat (les). The observed impairment is associated with abnormal inspiratory neural output. Minimal myelin staining was found throughout the CNS of les rats, including the brainstem and cervical bulbospinal tracts. Ventilation (via whole-body plethysmography) and phrenic motor output were assessed in les and wild-type (WT) rats during baseline, hypoxia (11% O2) and hypercapnia (7% CO2). Hypercapnic ventilatory responses were similar in young adult les and WT rats (2 months old); in hypoxia, rats exhibited seizure-like activity with sustained apneas. However, 5–6 month old les rats exhibited decreased breathing frequencies, mean inspiratory flow (VT/TI) and ventilation (V̇E) during baseline and hypercapnia. Although phrenic motor output exhibited normal burst frequency and amplitude in 5–6 month old les rats, intra-burst activity was abnormal. In WT rats, phrenic activity was progressive and augmenting; in les rats, phrenic activity was decrementing with asynchronized, multipeaked activity. Thus, although ventilatory capacity is maintained in young, dysmyelinated rats, ventilatory impairment develops with age, possibly through discoordination in respiratory motor output. This study is the first reporting age-related breathing abnormalities in a rodent dysmyelination model, and provides the foundation for mechanistic studies of respiratory insufficiency and therapeutic interventions. PMID:20542092

  8. Les Johnson Views Interstellar Sail Material

    NASA Technical Reports Server (NTRS)

    2002-01-01

    Engineers at Marshall Space Flight Center's (MSFC) Interstellar Propulsion Research department are proposing different solutions to combustion propellants for future space travel. One alternative being tested is the solar sail. The idea is, once deployed, the sail will allow solar winds to propel a spacecraft away from Earth and towards its destination. This would allow a spacecraft to travel indefinitely without the need to refuel during its ong journey. Thin reflective sails could be propelled through space by sunlight, microwave beams, or laser beams, just as the wind pushes sailboats on Earth. The sail will be the largest spacecraft ever built, sparning 440 yards, twice the diameter of the Louisiana Super Dome. Construction materials are being tested in a simulated space environment, where they are exposed to harsh conditions to test their performance and durability in extremely hot and cold temperatures. A leading candidate for the construction material is a carbon fiber material whose density is less than 1/10 ounce per square yard, the equivalent of flattening one raisin to the point that it covers a square yard. In space, the material would unfurl like a fan when it is deployed from an expendable rocket. This photo shows Les Johnson, manager of MSFC's Interstellar Propulsion Research Center holding the rigid, lightweight carbon fiber. An artist's concept of the sail is on the right. Mankind's first venture outside of our solar system is proposed for launch in a 2010 timeframe. An interstellar probe, powered by the fastest spacecraft ever flown, will zoom toward the stars at 58 miles per second. It will cover the distance from New York to Los Angeles in less than a minute and will travel over 23 billion miles beyond the edge of the solar system.

  9. Modelisation de la diffusion sur les surfaces metalliques: De l'adatome aux processus de croissance

    NASA Astrophysics Data System (ADS)

    Boisvert, Ghyslain

    Cette these est consacree a l'etude des processus de diffusion en surface dans le but ultime de comprendre, et de modeliser, la croissance d'une couche mince. L'importance de bien mai triser la croissance est primordiale compte tenu de son role dans la miniaturisation des circuits electroniques. Nous etudions ici les surface des metaux nobles et de ceux de la fin de la serie de transition. Dans un premier temps, nous nous interessons a la diffusion d'un simple adatome sur une surface metallique. Nous avons, entre autres, mis en evidence l'apparition d'une correlation entre evenements successifs lorsque la temperature est comparable a la barriere de diffusion, i.e., la diffusion ne peut pas etre associee a une marche aleatoire. Nous proposons un modele phenomenologique simple qui reproduit bien les resultats des simulations. Ces calculs nous ont aussi permis de montrer que la diffusion obeit a la loi de Meyer-Neldel. Cette loi stipule que, pour un processus active, le prefacteur augmente exponentiellement avec la barriere. En plus, ce travail permet de clarifier l'origine physique de cette loi. En comparant les resultats dynamiques aux resultats statiques, on se rend compte que la barriere extraite des calculs dynamiques est essentiellement la meme que celle obtenue par une approche statique, beaucoup plus simple. On peut donc obtenir cette barriere a l'aide de methodes plus precises, i.e., ab initio, comme la theorie de la fonctionnelle de la densite, qui sont aussi malheureusement beaucoup plus lourdes. C'est ce que nous avons fait pour plusieurs systemes metalliques. Nos resultats avec cette derniere approche se comparent tres bien aux resultats experimentaux. Nous nous sommes attardes plus longuement a la surface (111) du platine. Cette surface regorge de particularites interessantes, comme la forme d'equilibre non-hexagonale des i lots et deux sites d'adsorption differents pour l'adatome. De plus, des calculs ab initio precedents n'ont pas reussi a confirmer la

  10. Tensions entre rationalité technique et intérêts politiques : l’exemple de la mise en œuvre de la Loi sur les agences de développement de réseaux locaux de services de santé et de services sociaux au Québec

    PubMed Central

    Contandriopoulos, D.; Hudon, Raymond; Martin, Elisabeth; Thompson, Daniel

    2013-01-01

    Sommaire L’objet de cet article est constitué par les processus décisionnels entourant la mise en œuvre de la Loi sur les agences de développement de réseaux locaux de services de santé et de services sociaux (Loi 25). Nous entendons mettre en lumière les stratégies des groupes ou institutions de diverses natures qui ont fait valoir leurs préférences et ont tenté, avec un succès inégal, d’influencer les décisions relatives à cette réforme majeure de la structure du système de santé québécois. Au plan théorique, nous nous appuyons principalement sur les modèles d’analyse du lobbying qui, depuis les travaux fondateurs de Milbrath (1960, 1963), présentent cette pratique comme un processus fondamental d’échange d’information. Selon les données colligées dans les retranscriptions d’entrevues, les stratégies observées correspondent effectivement aux caractéristiques constitutives du lobbying et, dans quelques situations, à celles du patronage. La combinaison de ces divers éléments révèle que la mise en œuvre de la Loi 25 s’avère être avant tout un processus proprement politique. Ainsi, furent relégués au second plan les arguments techniques qui composaient initialement les objectifs de la Loi. PMID:23509412

  11. Late Quaternary reef growth history of Les Saintes submarine plateau: a key to constrain active faulting kinematics in Guadeloupe (FWI)

    NASA Astrophysics Data System (ADS)

    Leclerc, F.; Feuillet, N.; Deplus, C.; Cabioch, G.; Tapponnier, P.; LeBrun, J.; Bazin, S.; Beauducel, F.; Boudon, G.; Le Friant, A.; De Min, L.; Melezan, D.

    2012-12-01

    The damaging November 21 2004 earthquake (Mw 6.3) occurred on a large normal fault system offshore Les Saintes archipelago in Guadeloupe. To better constrain the seismic hazard related to this fault system, new data were acquired in 2009 and 2010 during the GWADASEIS and BATHYSAINTES cruises. Digital Elevation Models (DEM), with a horizontal resolution of 2.5 m, were calculated with the bathymetric data acquired at shallow depth on Les Saintes insular shelf. Together with seismic reflection profiles, this data makes it possible to identify and map the fault system and to understand its kinematics with respect to the plateau formation. The 15km wide, -45m deep drowned plateau of Les Saintes is composed of four coral terraces, down to 110 m bsl, piled-up on the Upper Pliocene to Quaternary Les Saintes volcanic centres. The shallowest terrace corresponds to a drowned Holocene reef system. Reef typical features, as double barriers, pinnacles, spurs and grooves, are well identified in the bathymetry. Seismic reflection profiles indicate that the Holocene terrace overlays Pleistocene ones. Geophysical data and reef growth modeling tend to show that the reef plateau has formed under subsidence conditions (~0.35 mm/yr) since Ionian ages, recording the main sea level highstands, before being drowned during the last sea level rise, around 11ka BP. The four terraces are crosscut by several NW-SE striking normal faults, which have scarps up to 8m. They offset them, the older, the more, inducing syntectonic sedimentation. The fault system extends from the northern plateau's edge to Les Saintes channel, toward Dominica, constituting the eastern side of Les Saintes graben. In the channel, the Roseau Fault, responsible for the 2004 earthquake, bounds the graben western side. The new data confirms its extent to the north, as the fault offsets the plateau's western cliff by several tens of meter, counter-slope like, dipping under Les Saintes islands and inducing a high seismic

  12. Les inconvénients de perdre du poids

    PubMed Central

    Bosomworth, N. John

    2012-01-01

    Résumé Objectif Explorer les raisons pour lesquelles la perte de poids à long terme échoue la plupart du temps et évaluer les conséquences de diverses trajectoires pondérales, y compris la stabilité, la perte et le gain. Source des données Les études qui évaluent les paramètres pondéraux dans la population sont en majorité observationnelles. Des données probantes de niveau I ont été publiées pour évaluer l’influence des interventions relatives au poids sur la mortalité et la qualité de vie. Message principal Seulement un petit pourcentage des personnes qui désirent perdre du poids réussissent à le faire de manière durable. La mortalité est la plus faible chez les personnes se situant dans la catégorie de poids élevé-normal et surpoids. La trajectoire pondérale la plus sécuritaire est la stabilité du poids avec une optimisation de la condition physique et métabolique. Il est démontré que la mortalité est plus faible chez les personnes ayant des comorbidités reliées à l’obésité si elles perdent du poids. Il est aussi établi que la qualité de vie sur le plan de la santé est meilleure chez les personnes obèses qui perdent du poids. Par contre, la perte de poids chez une personne obèse autrement en santé est associée à une mortalité accrue. Conclusion La perte de poids est recommandable seulement chez les personnes qui ont des comorbidités reliées à l’obésité. Les personnes obèses en santé qui veulent perdre du poids devraient être informées qu’il peut y avoir des risques à le faire. Une stratégie qui se traduit par un indice de masse corporelle stable avec une condition physique et métabolique optimisée, peu importe le poids, est l’option d’intervention la plus sécuritaire en ce qui concerne le poids.

  13. Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

    NASA Astrophysics Data System (ADS)

    Veres, Teodor

    Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques

  14. A filtered tabulated chemistry model for LES of premixed combustion

    SciTech Connect

    Fiorina, B.; Auzillon, P.; Darabiha, N.; Gicquel, O.; Veynante, D.; Vicquelin, R.

    2010-03-15

    A new modeling strategy called F-TACLES (Filtered Tabulated Chemistry for Large Eddy Simulation) is developed to introduce tabulated chemistry methods in Large Eddy Simulation (LES) of turbulent premixed combustion. The objective is to recover the correct laminar flame propagation speed of the filtered flame front when subgrid scale turbulence vanishes as LES should tend toward Direct Numerical Simulation (DNS). The filtered flame structure is mapped using 1-D filtered laminar premixed flames. Closure of the filtered progress variable and the energy balance equations are carefully addressed in a fully compressible formulation. The methodology is first applied to 1-D filtered laminar flames, showing the ability of the model to recover the laminar flame speed and the correct chemical structure when the flame wrinkling is completely resolved. The model is then extended to turbulent combustion regimes by including subgrid scale wrinkling effects in the flame front propagation. Finally, preliminary tests of LES in a 3-D turbulent premixed flame are performed. (author)

  15. Finite element implementation of a dynamic residual-based LES model

    NASA Astrophysics Data System (ADS)

    Madonna, Nicholas

    We are introduced to a new dynamic model for k, the filtered fine-scale kinetic energy, in the context of the Residual-Based Variational Multiscale method (RBVMS) for Large Eddy Simulation (LES). We transform the strong form of the equation for k into its stabilized finite element form. With this result, we take strides toward implementing this model into PHASTA, an open source code for solving compressible and incompressible flows. Three test cases are conducted to verify the proper implementation of various components of the model. The results of these tests provide evidence to suggest that the current implementation of this new model into PHASTA is correct thus far. We conclude with a number of steps to take in the future to fully implement the model.

  16. Eulerian Time-Domain Filtering for Spatial LES

    NASA Technical Reports Server (NTRS)

    Pruett, C. David

    1997-01-01

    Eulerian time-domain filtering seems to be appropriate for LES (large eddy simulation) of flows whose large coherent structures convect approximately at a common characteristic velocity; e.g., mixing layers, jets, and wakes. For these flows, we develop an approach to LES based on an explicit second-order digital Butterworth filter, which is applied in,the time domain in an Eulerian context. The approach is validated through a priori and a posteriori analyses of the simulated flow of a heated, subsonic, axisymmetric jet.

  17. Status of the SUSY Les Houches Accord II Project

    SciTech Connect

    Allanach, B.C.; Balazs, C.; Belanger, G.; Boudjema, F.; Choudhury, D.; Desch, K.; Ellwanger, U.; Gambino, P.; Godbole, R.; Guasch, J.; Guchait, M.; Heinemeyer, S.; Hugonie, C.; Hurth, T.; Kraml, S.; Lykken, J.; Mangano, M.; Moortgat, F.; Moretti, S.; Penaranda, S.; Porod, W.; /Fermilab

    2005-05-01

    Supersymmetric (SUSY) spectrum generators, decay packages, Monte-Carlo programs, dark matter evaluators, and SUSY fitting programs often need to communicate in the process of an analysis. The SUSY Les Houches Accord provides a common interface that conveys spectral and decay information between the various packages. Here, we propose extensions of the conventions of the first SUSY Les Houches Accord to include various generalizations: violation of CP, R-parity and flavor as well as the simplest next-to-minimal supersymmetric standard model (NMSSM).

  18. Les Hemorragies Gastroduodenales de Stress Chez le Brule Grave

    PubMed Central

    Siah, S.; Fouadi, F.E.; Ababou, K.; Nassim Sabah, T.; Ihrai, I.

    2008-01-01

    Summary Les Auteurs rapportent trois observations d'hémorragies gastroduodénales de stress chez le brûlé grave. Ils rappellent l'importance des mesures thérapeutiques qui doivent être prises chez le brûlé grave, comme le traitement du choc, du sepsis, des plaies et de la douleur, la nutrition entérale précoce et l'oxygénothérapie. Tout cela permet de réduire les facteurs de risque de survenue d'une hémorragie gastroduodénale de stress. PMID:21991137

  19. On integrating LES and laboratory turbulent flow experiments

    SciTech Connect

    Grinstein, Fernando Franklin

    2008-01-01

    Critical issues involved in large eddy simulation (LES) experiments relate to the treatment of unresolved subgrid scale flow features and required initial and boundary condition supergrid scale modelling. The inherently intrusive nature of both LES and laboratory experiments is noted in this context. Flow characterization issues becomes very challenging ones in validation and computational laboratory studies, where potential sources of discrepancies between predictions and measurements need to be clearly evaluated and controlled. A special focus of the discussion is devoted to turbulent initial condition issues.

  20. Detailed characteristics of drop-laden mixing layers: LES predictions compared to DNS

    NASA Technical Reports Server (NTRS)

    Okong'o, N.; Leboissetier, A.; Bellan, J.

    2004-01-01

    Results have been compared from Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES) of a temporal mixing layer laden with evaporating drops, to assess the ability of LES to reproduce detailed characteristics of DNS.

  1. Définir les choix à risque: l'éthique et les effets des décisions organisationnelles.

    PubMed

    Warren, Marika

    2016-07-01

    Les choix de vivre « à risque » sont complexes et difficiles. Ils peuvent être structurés par les politiques organisationnelles. Certaines personnes veulent vraiment vivre dans des situations à haut risque ou perçues comme telles parce qu'elles en tirent un avantage important. Cependant, il est probable que ces choix dépendent en grande partie du contexte et qu'ils ne se soient pas posés dans une autre situation. L'article plaide pour la responsabilité d'être attentif aux effets des décisions organisationnelles sur les choix de vivre à risque et sur la répartition globale du risque. PMID:27365384

  2. Approche structurée en pratique familiale pour les patients ayant des problèmes de mémoire

    PubMed Central

    Lee, Linda; Weston, W. Wayne; Heckman, George; Gagnon, Micheline; Lee, F. Joseph; Sloka, Scott

    2013-01-01

    Résumé Objectif Présenter aux médecins de famille une approche structurée pour les patients qui présentent des problèmes de mémoire. Sources des données Cette approche se fonde sur un programme agréé de formation clinique sur la mémoire, élaboré par le Centre for Family Medicine Memory Clinic en partenariat avec le Collège des médecins de famille de l’Ontario. Message principal Le recours à une approche structurée de raisonnement clinique peut aider les médecins à poser un diagnostic exact chez des patients qui présentent des problèmes de mémoire. Le délirium, la dépression et les causes réversibles doivent être exclus, pour ensuite faire une différenciation entre le vieillissement cognitif normal, la déficience cognitive légère et la démence. Il est essentiel de procéder à une anamnèse collatérale et à une évaluation fonctionnelle exacte. Les formes courantes de la démence peuvent être cliniquement différenciées par la séquence dans laquelle les symptômes apparaissent et par la façon dont les déficits cognitifs évoluent avec le temps. Habituellement, les signes précoces de la démence d’Alzheimer comportent une déficience de la mémoire épisodique, tandis que la démence due principalement à des causes vasculaires peut se présenter par une perte précoce de la fonction exécutive et de la fonction visuospatiale, ainsi que des caractéristiques cliniques particulières. Conclusion Une approche de raisonnement clinique peut aider les médecins à poser des diagnostics précoces et exacts qui peuvent orienter une prise en charge appropriée et améliorer les soins aux patients qui ont des problèmes de mémoire.

  3. CHARACTERIZATION OF THE 'PSEUDOMONAS AERUGINOSA' RECA GENE: THE LES (LYSOGENY ESTABLISHMENT DEFICIENT)- PHENOTYPE (JOURNAL VERSION)

    EPA Science Inventory

    The Les- (lysogeny establishment deficient) phenotype is a pleiotropic effect of the lesB908 mutation of Pseudomonas aruginosa PAO. LesB908-containing strains are also deficient in general recombination, sensitive to UV irradiation, and deficient in UV-stimulated induction of pro...

  4. Careers (A Course of Study). Unit V: Forms, Forms, Forms.

    ERIC Educational Resources Information Center

    Turley, Kay

    Designed to enable special needs students to understand and complete various job-related forms, this set of activities devoted to forms encountered before and after one obtains a job is the fifth in a nine-unit secondary level careers course intended to provide handicapped students with the knowledge and tools necessary to succeed in the world of…

  5. Les reconstructions acétabulaires dans les prothèses totales de hanche

    PubMed Central

    Zejjari, Hassane; Louaste, Jamal; Cherrad, Taoufik; Bousbae, Hicham; Kasmaoui, Housseine; Amhajji, Larbi; Rachid, Khalid

    2015-01-01

    La chirurgie de reconstruction acétabulaire est une technique qui consiste à combler les pertes de substance osseuse siégeant au niveau du cotyle. Il s'agit d'une étude rétrospective de 15 patients (16 cotyles), sur une période de 6 ans (2006- 2012). Dans douze cas il s'agissait de prothèse totales de la hanche de première intention et dans quatre cas il s'agissait de reprise cotyloïdienne de PTH. L’évaluation clinique préopératoire et postopératoire de tous nos patients a été effectuée par le score de Postel et Merle d'Aubigné. L’évaluation des pertes de substances osseuse du cotyle a été classée selon la classification de Paprosky. L’âge moyen de nos patients au moment de l'intervention a été de 57 ans avec des extrêmes allant de 20 ans à 76 ans. La greffe osseuse a été utilisée chez 12 de nos patients. La reconstruction prothétique a été utilisée chez 8 patients (anneau de Kerboul dans six cas et anneau de Burch-Schneider dans deux cas). Recul post opératoire moyen a été de 56 mois. L’évaluation radiologique a été basée sur les clichés radiologiques du bassin de face strict ainsi que des radiographies de la hanche opérée de face prenant la totalité de la prothèse. Nos résultats cliniques et radiologiques ont été jugé bon à très bon dans la majorité des cas. Pour nous, nous optant pour le recentrage-reconstruction car c'est lui qui s'approche le plus de l'anatomie et de la biomécanique normale de la hanche. PMID:26955415

  6. [The Les Morts de la Rue collective, strong social commitment].

    PubMed

    Rocca, Cécile

    2016-02-01

    The problems faced by homeless people are varied and complex. They require numerous qualities on the part of professionals. Living on the streets often means dying on the streets. Professionals are thereby confronted with practical and ethical questions. They have a key role both in listening and providing support. This article shows the example of the Les Morts de la Rue collective. PMID:26861085

  7. Experiments with explicit filtering for LES using a finite-difference method

    NASA Technical Reports Server (NTRS)

    Lund, T. S.; Kaltenbach, H. J.

    1995-01-01

    most of the energy-containing eddies, and if explicit filtering is used, the mesh must be enlarged so that these motions are passed by the filter. Given the high cost of explicit filtering, the following interesting question arises. Since the mesh must be expanded in order to perform the explicit filter, might it be better to take advantage of the increased resolution and simply perform an unfiltered simulation on the larger mesh? The cost of the two approaches is roughly the same, but the philosophy is rather different. In the filtered simulation, resolution is sacrificed in order to minimize the various forms of numerical error. In the unfiltered simulation, the errors are left intact, but they are concentrated at very small scales that could be dynamically unimportant from a LES perspective. Very little is known about this tradeoff and the objective of this work is to study this relationship in high Reynolds number channel flow simulations using a second-order finite-difference method.

  8. Massively parallel LES of azimuthal thermo-acoustic instabilities in annular gas turbines

    NASA Astrophysics Data System (ADS)

    Wolf, Pierre; Staffelbach, Gabriel; Gicquel, Laurent; Poinsot, Thierry

    2009-07-01

    Most of the energy produced worldwide comes from the combustion of fossil fuels. In the context of global climate changes and dramatically decreasing resources, there is a critical need for optimizing the process of burning, especially in the field of gas turbines. Unfortunately, new designs for efficient combustion are prone to destructive thermo-acoustic instabilities. Large Eddy Simulation (LES) is a promising tool to predict turbulent reacting flows in complex industrial configurations and explore the mechanisms triggering the coupling between acoustics and combustion. In the particular field of annular combustion chambers, these instabilities usually take the form of azimuthal modes. To predict these modes, one must compute the full combustion chamber comprising all sectors, which remained out of reach until very recently and the development of massively parallel computers. A fully compressible, multi-species reactive Navier-Stokes solver is used on up to 4096 BlueGene/P CPUs for two designs of a full annular helicopter chamber. Results show evidence of self-established azimuthal modes for the two cases but with different energy containing limit-cycles. Mesh dependency is checked with grids comprising 38 and 93 million tetrahedra. The fact that the two grid predictions yield similar flow topologies and limit-cycles enforces the ability of LES to discriminate design changes.

  9. LES of non-Newtonian physiological blood flow in a model of arterial stenosis.

    PubMed

    Molla, M M; Paul, M C

    2012-10-01

    Large Eddy Simulation (LES) is performed to study the physiological pulsatile transition-to-turbulent non-Newtonian blood flow through a 3D model of arterial stenosis by using five different blood viscosity models: (i) Power-law, (ii) Carreau, (iii) Quemada, (iv) Cross and (v) modified-Casson. The computational domain has been chosen is a simple channel with a biological type stenosis formed eccentrically on the top wall. The physiological pulsation is generated at the inlet of the model using the first four harmonic series of the physiological pressure pulse (Loudon and Tordesillas [1]). The effects of the various viscosity models are investigated in terms of the global maximum shear rate, post-stenotic re-circulation zone, mean shear stress, mean pressure, and turbulent kinetic energy. We find that the non-Newtonian viscosity models enlarge the length of the post-stenotic re-circulation region by moving the reattachment point of the shear layer separating from the upper wall further downstream. But the turbulent kinetic energy at the immediate post-lip of the stenosis drops due to the effects of the non-Newtonian viscosity. The importance of using LES in modelling the non-Newtonian physiological pulsatile blood flow is also assessed for the different viscosity models in terms of the results of the dynamic subgrid-scale (SGS) stress Smagorinsky model constant, C(s), and the corresponding SGS normalised viscosity. PMID:22153320

  10. RAS and LES Simulation of the supercritical flow over the waving bed

    NASA Astrophysics Data System (ADS)

    Fu, X.; Ma, H.; Heyman, J.; Mettra, F.; Liu, D.; Ancey, C.

    2013-12-01

    The phenomena of bed forms exist widely in the natural rivers and are still not fully understood. The detailed sediment dynamics near the bed is essential for this problem. However, the fluid dynamics near the bed, which drives the sediment motion, is not clear. In this talk, we focus on the fluid dynamics of supercritical flow over a sinusoidal wavy bed, especially around the wall region. This setup mimics anti-dunes morphology i.e. bedforms that are commonly found in steep mountain streams. In this case, the flow depth and the bedform amplitude have the same order of magnitude with the amplitude of the bedform. To study the detailed fluid flow, a 3-Dimensional numerical simulation of Navier-Stokes equations is performed. Two different models, Reynolds Average Simulation (RAS) and Large Eddy Simulation (LES), are used for the turbulence closure. The two models are validated with experiments carried out on a wavy bed. Particular attention is paid to the fluid shear stress on the wavy bed and the bedform equivalent roughness. LES shows more abilities for this problem. In future, various wavelength and amplitude of the sinus wave will be implemented so that new shear stress formulas and parameterization for the anti-dune roughness in shallow water equations will be proposed.

  11. Développement de matériaux pour les piles à combustibles SOFC

    NASA Astrophysics Data System (ADS)

    Dubourdieu, G.; Gauthier, G.; Henry, J. Y.; Sanchette, F.; Delépine, J.; Lefebvre-Joud, F.

    2002-04-01

    Dans le cadre des nouveaux programmes du CEA dédiés aux Nouvelles Technologies pour l'Energie, l'un des axes concerne les piles à combustible haute température et tout solide (SOFC). Deux voies de recherche sont présentées ici ; l'une traite de l'élaboration d'électrolytes connus - de type zircone yttriée - en couche mince, par des techniques de dépôt PVD ou CVD à injection, ceci dans le but d'un fonctionnement à plus basse température. L'autre a trait au développement de matériaux d'anode compatibles avec l'utilisation directe du méthane à la place de l'hydrogène. Les chromates de lanthane substitué par le strontium, dont une méthode de synthèse sous forme de poudres très divisées est présentée ici, semblent être des matériaux prometteurs pour cette application, à condition qu'ils ne subissent pas de dégradation en fonctionnement.

  12. DNS and LES of a Shear-Free Mixing Layer

    NASA Technical Reports Server (NTRS)

    Knaepen, B.; Debliquy, O.; Carati, D.

    2003-01-01

    The purpose of this work is twofold. First, given the computational resources available today, it is possible to reach, using DNS, higher Reynolds numbers than in Briggs et al.. In the present study, the microscale Reynolds numbers reached in the low- and high-energy homogeneous regions are, respectively, 32 and 69. The results reported earlier can thus be complemented and their robustness in the presence of increased turbulence studied. The second aim of this work is to perform a detailed and documented LES of the shear-free mixing layer. In that respect, the creation of a DNS database at higher Reynolds number is necessary in order to make meaningful LES assessments. From the point of view of LES, the shear-free mixing-layer is interesting since it allows one to test how traditional LES models perform in the presence of an inhomogeneity without having to deal with difficult numerical issues. Indeed, as argued in Briggs et al., it is possible to use a spectral code to study the shear-free mixing layer and one can thus focus on the accuracy of the modelling while avoiding contamination of the results by commutation errors etc. This paper is organized as follows. First we detail the initialization procedure used in the simulation. Since the flow is not statistically stationary, this initialization procedure has a fairly strong influence on the evolution. Although we will focus here on the shear-free mixing layer, the method proposed in the present work can easily be used for other flows with one inhomogeneous direction. The next section of the article is devoted to the description of the DNS. All the relevant parameters are listed and comparison with the Veeravalli & Warhaft experiment is performed. The section on the LES of the shear-free mixing layer follows. A detailed comparison between the filtered DNS data and the LES predictions is presented. It is shown that simple eddy viscosity models perform very well for the present test case, most probably because the

  13. Stochasticity of convection in Giga-LES data

    NASA Astrophysics Data System (ADS)

    De La Chevrotière, Michèle; Khouider, Boualem; Majda, Andrew J.

    2015-12-01

    The poor representation of tropical convection in general circulation models (GCMs) is believed to be responsible for much of the uncertainty in the predictions of weather and climate in the tropics. The stochastic multicloud model (SMCM) was recently developed by Khouider et al. (Commun Math Sci 8(1):187-216, 2010) to represent the missing variability in GCMs due to unresolved features of organized tropical convection. The SMCM is based on three cloud types (congestus, deep and stratiform), and transitions between these cloud types are formalized in terms of probability rules that are functions of the large-scale environment convective state and a set of seven arbitrary cloud timescale parameters. Here, a statistical inference method based on the Bayesian paradigm is applied to estimate these key cloud timescales from the Giga-LES dataset, a 24-h large-eddy simulation (LES) of deep tropical convection (Khairoutdinov et al. in J Adv Model Earth Syst 1(12), 2009) over a domain comparable to a GCM gridbox. A sequential learning strategy is used where the Giga-LES domain is partitioned into a few subdomains, and atmospheric time series obtained on each subdomain are used to train the Bayesian procedure incrementally. Convergence of the marginal posterior densities for all seven parameters is demonstrated for two different grid partitions, and sensitivity tests to other model parameters are also presented. A single column model simulation using the SMCM parameterization with the Giga-LES inferred parameters reproduces many important statistical features of the Giga-LES run, without any further tuning. In particular it exhibits intermittent dynamical behavior in both the stochastic cloud fractions and the large scale dynamics, with periods of dry phases followed by a coherent sequence of congestus, deep, and stratiform convection, varying on timescales of a few hours consistent with the Giga-LES time series. The chaotic variations of the cloud area fractions were

  14. Developpement de mesures non destructives, par ondes ultrasonores, d'epaisseurs de fronts de solidification dans les reacteurs metallurgiques

    NASA Astrophysics Data System (ADS)

    Floquet, Jimmy

    Dans les cuves d'electrolyse d'aluminium, le milieu de reaction tres corrosif attaque les parois de la cuve, ce qui diminue leur duree de vie et augmente les couts de production. Le talus, qui se forme sous l'effet des pertes de chaleur qui maintiennent un equilibre thermique dans la cuve, sert de protection naturelle a la cuve. Son epaisseur doit etre controlee pour maximiser cet effet. Advenant la resorption non voulue de ce talus, les degats generes peuvent s'evaluer a plusieurs centaines de milliers de dollars par cuve. Aussi, l'objectif est de developper une mesure ultrasonore de l'epaisseur du talus, car elle serait non intrusive et non destructive. La precision attendue est de l'ordre du centimetre pour des mesures d'epaisseurs comprenant 2 materiaux, allant de 5 a 20 cm. Cette precision est le facteur cle permettant aux industriels de controler l'epaisseur du talus de maniere efficace (maximiser la protection des parois tout en maximisant l'efficacite energetique du procede), par l'ajout d'un flux thermique. Cependant, l'efficacite d'une mesure ultrasonore dans cet environnement hostile reste a demontrer. Les travaux preliminaires ont permis de selectionner un transducteur ultrasonore a contact ayant la capacite a resister aux conditions de mesure (hautes temperatures, materiaux non caracterises...). Differentes mesures a froid (traite par analyse temps-frequence) ont permis d'evaluer la vitesse de propagation des ondes dans le materiau de la cuve en graphite et de la cryolite, demontrant la possibilite d'extraire l'information pertinente d'epaisseur du talus in fine. Fort de cette phase de caracterisation des materiaux sur la reponse acoustique des materiaux, les travaux a venir ont ete realises sur un modele reduit de la cuve. Le montage experimental, un four evoluant a 1050 °C, instrumente d'une multitude de capteurs thermique, permettra une comparaison de la mesure intrusive LVDT a celle du transducteur, dans des conditions proches de la mesure

  15. Protéger les nourrissons contre la coqueluche

    PubMed Central

    Gilley, Meghan; Goldman, Ran D.

    2014-01-01

    Résumé Question Compte tenu du taux à la hausse de la coqueluche chez les enfants, plusieurs familles m’ont demandé quels moyens prendre pour protéger leurs tout-petits de cette infection. Quelles devraient être mes recommandations à ces familles? Réponse La coqueluche est une maladie évitable qui est endémique dans le monde entier. Chez les adultes, la coqueluche cause une maladie bénigne semblable à un rhume, suivie d’une toux persistante. Chez les nourrissons, elle peut causer de l’apnée, des convulsions, une encéphalopathie, une bronchopneumonie et la mort. Les décès dus à la coqueluche se produisent dans 86 % des cas chez des nourrissons de moins de 4 mois. La stratégie du cocooning, c’est-à-dire la vaccination des adultes en étroit contact avec des nourrissons, est recommandée par de nombreuses agences mondiales et nationales, mais elle ne prévient probablement que 20 % des cas de coqueluche chez les nourrissons. La vaccination durant la grossesse est plus efficace, mais elle n’est pas encore approuvée au Canada. Il n’a pas été démontré que la vaccination à la naissance soit uniformément efficace et elle n’est donc pas recommandée à l’heure actuelle.

  16. Les astronomes européens auscultent les cieux avec le plus grand télescope du monde

    NASA Astrophysics Data System (ADS)

    Malbet, F.

    2008-09-01

    À l'heure des projets de télescopes extrêmement grands, l'Europe a déjà une longueur d'avance. Le télescope européen (VLT), en mode interférométrique avec l'instrument AMBER devient le plus grand télescope jamais utilisé dans le domaine optique aussi bien en surface de miroir (plus de 150 m2) qúen finesse de résolution qui atteint celle d'un télescope de 130 m de diamètre. Le journal professionnel Astronomy & Astrophysics a publié en 2007 un numéro spécial qui rapporte les premiers résultats obtenus avec l'instrument AMBER (Astronomical MultiBEam Recombiner) par le très grand télescope européen. Ces articles couvrent pratiquement tous les stades de l'évolution stellaire depuis la formation des étoiles et des planètes jusqu'a l'observation de l'explosion de type nova dans un système stellaire évolué. Ces résultats inédits ont été obtenus en utilisant simultanément 3 des 4 télescopes du VLT basés à l'Observatoire européen austral du mont Paranal au Chili. L'instrument AMBER équipant le VLTI (mode interférométrique du VLT) permet dâatteindre une résolution angulaire inégalée de l'ordre du millième de seconde d'angle autorisant l'observation des astres dans différentes longueurs d'onde, dans l'infrarouge proche. Les astronomes obtiennent donc des observations avec une finesse 13 fois plus importante que celle d'un télescope seul. Il devient alors possible de sonder les régions de formation de planètes, d'observer les vents des étoiles en rotation très rapide, d'étudier les différents types de matières éjectées par une étoile massive, de séparer les deux composantes d'une étoile double serrée et de voir en direct l'évolution d'une nova quelques jours seulement après son explosion.

  17. Les maladies chroniques non transmissibles chez les militaires sénégalais: étude transversale en 2013

    PubMed Central

    Aziz, Ndiaye Abdoul; Mohamed, Seck Sidy; Badara, Tall Alioune; Boubacar, Gueye; Gallo, Sow Papa; Awa, Gaye; Anta, Tal-Dia

    2015-01-01

    Introduction Les maladies chroniques non transmissibles (MCNT) constituent un problème de santé publique. La transition épidémiologique coexiste avec les maladies infectieuses. En Afrique subsaharienne, leur ampleur est peu connue et l'OMS recommande aux pays à faible et moyen revenu de réaliser des enquêtes STEPS portant sur les comportements, des mesures physiques et biochimiques. L'absence de données au niveau national justifie cette étude auprès d'un groupe spécifique. L'objectif de l’étude était de déterminer la prévalence des MCNT et de leurs facteurs de risque chez les militaires Sénégalais. Méthodes Une enquête transversale a été réalisée incluant les militaires âgés de 25 à 60 ans. La participation était volontaire et l'accord des autorités hiérarchiques a préalablement été obtenu. Un sondage stratifié à deux niveaux a été utilisé permettant d'avoir un échantillon ajusté de 1513 individus. Les données ont été saisies avec le logiciel EPI Info 6 et analysées à l'aide de R. Un score de risque a été déterminé sur la base de cinq facteurs. Résultats Les résultats préliminaires concernent 1125 personnes. L’âge moyen était de 39,7 ±9,1 ans et le sex-ratio de 28,6. La prévalence du tabagisme actif était de 17,3% et ne variait pas significativement entre les différentes catégories d’âge. L’âge moyen auquel ils ont commencé à fumer était de 20,8 ±4,05 ans. La consommation médiane de fruits et légumes était de l'ordre de 4 par jour et seulement 5,7% des enquêtés prenaient au moins 5 portions par jour. Environs 72% des enquêtés avaient une activité physique intense ou modérée. Les prévalences de la surcharge pondérale, de l'HTA et du diabète étaient de 30,5%, 28,4% et 3,0% respectivement alors que la maladie rénale chronique était retrouvée chez un seul cas. Le calcul du score de risque cardiovasculaire a montré que 39,1% des militaires étaient à risque élevé (≥3 facteurs

  18. A Review of the IDEA Oral Language Proficiency Test Forms C & D-English.

    ERIC Educational Resources Information Center

    Cook, Allison A.

    The IDEA Oral Language Proficiency Test (IPT-I), forms C and D, aims to determine the level of English oral language proficiency as it relates to accepted levels of NonEnglish speaking (NES), limited English speaking (LES), and fluent English speaking (FES) designations in order to place students in an appropriate classroom setting. The test was…

  19. The "FORM" Approach to Reading Forms.

    ERIC Educational Resources Information Center

    Sandel, Lenore

    The FORM approach is designed to help persons in the senior population with the task of filling out the forms or applications required for a myriad of societal and human needs. The acronym represents a four-part approach consisting of: Facing the issue; applying Overview; Rewriting headings as questions; and Matching information as appropriate…

  20. Les recommandations thérapeutiques relatives aux effets secondaires extrapyramidaux associés à l’utilisation d’antipsychotiques de deuxième génération chez les enfants et les adolescents

    PubMed Central

    Pringsheim, Tamara; Doja, Asif; Belanger, Stacey; Patten, Scott

    2012-01-01

    HISTORIQUE ET OBJECTIF : L’utilisation d’antipsychotiques augmente chez les enfants. Le présent article visait à orienter les cliniciens quant à la prise en charge clinique des effets secondaires extrapyramidaux des antipsychotiques de deuxième génération. MÉTHODOLOGIE : Les publications, les entrevues avec des informateurs clés et des échanges avec les membres d’un groupe de discussion et les partenaires ont permis de déterminer les principaux secteurs cliniques d’orientation et les préférences quant à la structure des présentes recommandations. Les membres responsables des lignes directrices ont reçu le projet de recommandations, ont évalué l’information recueillie grâce à une analyse bibliographique systématique et ont utilisé un processus de groupe nominal pour parvenir à un consensus quant aux recommandations thérapeutiques. Les lignes directrices contiennent une description des anomalies neurologiques souvent observées avec l’utilisation d’antipsychotiques ainsi que les recommandations sur le moyen d’examiner et de quantifier ces anomalies. Une démarche séquentielle sur la prise en charge des anomalies neurologiques est présentée. RÉSULTATS : On peut observer plusieurs types de symptômes extrapyramidaux attribuables à l’utilisation d’antipsychotiques chez les enfants, y compris la dystonie aiguë, l’akathisie, le parkinsonisme et la dyskinésie tardive, toutes induites par les neuroleptiques, de même que la dystonie tardive, l’akathisie tardive et les dyskinésies de sevrage. La forte majorité des données probantes sur le traitement des troubles du mouvement induits par les antipsychotiques proviennent de patients adultes atteints de schizophrénie. Étant donné le peu de données pédiatriques, les recommandations découlent de publications portant tant sur des adultes que sur des enfants. Compte tenu des limites de généralisation des données provenant de sujets adultes pour des enfants, il

  1. Etude experimentale des excitations topologiques de l'effet Hall quantique a nu = 1 dans les heterostructures semiconductrices a double puits quantique

    NASA Astrophysics Data System (ADS)

    Charlebois, Serge

    De nombreux travaux theoriques et experimentaux ont ete publies sur les excitations topologiques de gaz electroniques bidimensionnels (GE2D), appellees skyrmions, dans le regime de l'effet Hall quantique a remplissage unitaire. On attend des excitations semblables appellees bimerons dans les systemes formes de deux GE2D couples. Contrairement au cas des GE2D simples, aucune experience n'a, a notre connaissance, presente la mesure d'une propriete specifique aux bimerons. Nous presentons dans cette these des travaux experimentaux ayant pour objectif l'etude d'excitations topologiques dans les heterostructures a double puits quantique. Une manifestation attendue (les bimerons est la presence d'une anisotropie dans la conductivite a travers une constriction. Nous avons concu un dispositif original a point de contact a trois grilles non-coplanaires. Ce dispositif a trois grilles a la particularite de permettre la creation d'une constriction etroite dans le double GE2D tout en permettant l'equilibrage de la densite electronique entre les deux puits dans l'etroit canal de conduction. Nous avons fabrique ce dispositif de taille submicronique par electrolithographie sur des heterostructures a double puits. Les dispositifs ainsi fabriques ont ete etudies a basse temperature (0.3K) et ont montre un fonctionnement conforme aux attentes. Les travaux n'ont pas permis de mettre en evidence une anisotropie de transport revelatrice de l'existence de bimerons. Cette these est a notre connaissance la premiere etude experimentale visant la realisation de l'experience d'anisotropie de transport et est ainsi une contribution significative a l'avancement des connaissances dans ce domaine. Les travaux theoriques que nous presentons ont permis de montrer l'effet des excitations topologiques sur la capacite grille-GE2D du systeme. Ces travaux ouvrent la voie de la detection des bimerons par l'intermediaire de la mesure de la capacite grille-GE2D ou encore de la susceptibilite electrique du

  2. Lignes directrices simplifiées sur les lipides

    PubMed Central

    Allan, G. Michael; Lindblad, Adrienne J.; Comeau, Ann; Coppola, John; Hudson, Brianne; Mannarino, Marco; McMinis, Cindy; Padwal, Raj; Schelstraete, Christine; Zarnke, Kelly; Garrison, Scott; Cotton, Candra; Korownyk, Christina; McCormack, James; Nickel, Sharon; Kolber, Michael R.

    2015-01-01

    Résumé Objectif Produire un guide de pratique clinique comportant une approche simplifiée à la prévention primaire des maladies cardiovasculaires (MCV), en insistant sur l’estimation du risque de MCV et la prise en charge des profils lipidiques à l’intention des cliniciens de soins primaires et leurs équipes; nous avons recherché la contribution de professionnels des soins primaires qui n’avaient que peu ou pas de conflits d’intérêts et nous nous sommes concentrés sur les données probantes de la plus haute qualité accessibles. Méthodes Neuf professionnels de la santé (4 médecins de famille, 2 internistes, 1 infirmière praticienne, 1 infirmière autorisée et 1 pharmacienne) et 1 membre non votant (pharmacienne gestionnaire de projet) formaient le comité principal appelé le Lipid Pathway Committee (le comité). La sélection des membres s’est fondée sur la profession, le milieu de pratique et son emplacement. Les membres ont divulgué tous leurs conflits d’intérêts potentiels ou réels. Le processus d’élaboration des lignes directrices était itératif et s’appuyait sur des affichages en ligne, une révision détaillée des données probantes, des réunions par téléphone et en ligne. Le comité a cerné 12 questions prioritaires à répondre. Le groupe de révision des données probantes a répondu à ces questions. À la suite d’un examen des réponses, les principales recommandations ont été formulées par consensus du comité. Nous avons produit une ébauche des lignes directrices qui a ensuite été peaufinée, distribuée à un groupe de cliniciens (médecins de famille, autres spécialistes, pharmaciens, infirmières et infirmières praticiennes) et à des patients pour obtenir de la rétroaction, la réviser en conséquence et le comité l’a ensuite finalisée. Recommandations Des recommandations sont présentées concernant le dépistage et les analyses, les évaluations du risque, le suivi, de même que le r

  3. Signal transduction in esophageal and LES circular muscle contraction.

    PubMed Central

    Harnett, K. M.; Cao, W.; Kim, N.; Sohn, U. D.; Rich, H.; Behar, J.; Biancani, P.

    1999-01-01

    Contraction of normal esophageal circular muscle (ESO) in response to acetylcholine (ACh) is linked to M2 muscarinic receptors activating at least three intracellular phospholipases, i.e., phosphatidylcholine-specific phospholipase C (PC-PLC), phospholipase D (PLD), and the high molecular weight (85 kDa) cytosolic phospholipase A2 (cPLA2) to induce phosphatidylcholine (PC) metabolism, production of diacylglycerol (DAG) and arachidonic acid (AA), resulting in activation of a protein kinase C (PKC)-dependent pathway. In contrast, lower esophageal sphincter (LES) contraction induced by maximally effective doses of ACh is mediated by muscarinic M3 receptors, linked to pertussis toxin-insensitive GTP-binding proteins of the G(q/11) type. They activate phospholipase C, which hydrolyzes phosphatidylinositol bisphosphate (PIP2), producing inositol 1,4,5-trisphosphate (IP3) and DAG. IP3 causes release of intracellular Ca++ and formation of a Ca++-calmodulin complex, resulting in activation of myosin light chain kinase and contraction through a calmodulin-dependent pathway. Signal transduction pathways responsible for maintenance of LES tone are quite distinct from those activated during contraction in response to maximally effective doses of agonists (e.g., ACh). Resting LES tone is associated with activity of a low molecular weight (approximately 14 kDa) pancreatic-like (group 1) secreted phospholipase A2 (sPLA2) and production of arachidonic acid (AA), which is metabolized to prostaglandins and thromboxanes. These AA metabolites act on receptors linked to G-proteins to induce activation of PI- and PC-specific phospholipases, and production of second messengers. Resting LES tone is associated with submaximal PI hydrolysis resulting in submaximal levels of inositol trisphosphate (IP3-induced Ca++ release, and interaction with DAG to activate PKC. In an animal model of acute esophagitis, acid-induced inflammation alters the contractile pathway of ESO and LES. In LES circular

  4. Adaptive resolution LES of a reacting non-premixed jet

    NASA Astrophysics Data System (ADS)

    Pantano, Carlos; Deiterding, Ralf; Hill, David; Pullin, Dale

    2004-11-01

    We present results of a turbulent reactive non-premixed jet using Large-Eddy Simulation (LES) performed within the blockstructured adaptive mesh refinement infrastructure AMROC. A fully compressible formulation of the transport equations and the stretched-vortex subgrid-stress model of Misra & Pullin (1997) are integrated with the assumed Beta subgrid pdf model for non-premixed combustion. Flamelet libraries are precomputed with the Cantera chemistry package. The modeling technique has been previously used and validated/verified in prior work, primarily for incompressible flows. One difficulty commonly encountered for these unstationary flows is the need to resolve certain regions of the flow field more finely than others. These can include thin shear layers and regions of steep density gradients produced by combustion. We show that adaptive resolution can be used successfully in the context of LES. This work is part of Caltech's ASC center supported by the Department of Energy (DOE).

  5. Form 5-Mining venture agreement model form

    SciTech Connect

    Not Available

    1984-01-01

    This text acts as a reference of the basic terms and conditions for a negotiated mining venture agreement. Alternative clauses and provisions, along with extensive commentary, are supplied. The model form contains many articles which define and detail the process.

  6. Tuberculose multifocale chez les immunocompétents

    PubMed Central

    Rezgui, Amel; Fredj, Fatma Ben; Mzabi, Anis; Karmani, Monia; Laouani, Chadia

    2016-01-01

    La tuberculose multifocale est définie par la l'atteinte d'au moins deux sites extra-pulmonaires associée ou non à une atteinte pulmonaire. On se propose d’étudier les différentes caractéristiques cliniques et évolutives de la tuberculose multifocale à travers une étude rétrospective de 10 cas. Parmi 41 cas de tuberculose colligés entre 1999 et 2013. Dix patients avaient une tuberculose multifocale, soit 24% des patients. Il s'agissait de 9 femmes et 1 homme d’âge moyen à 50 ans (30-68 ans). Nos patients étaient tous correctement vaccinés par le BCG. Un bilan à la recherche d'une éventuelle immunodépression fait pour tous les patients était négatif. Il s'agissait d'une tuberculose ganglionnaire dans 7 cas, digestive dans 3 cas, péricardique dans 2 cas, ostéo-articulaire dans 2 cas, cérébrale dans 1 cas, urinaire dans 2 cas, uro-génitale dans 4 cas, surrénalienne dans 1 cas, cutanée dans 1 cas et musculaire dans 1 cas. Tous nos patients ont bénéficié d'un traitement antituberculeux pour une durée moyenne de 10 mois avec bonne évolution. La tuberculose multifocale est une des maladies à diagnostic difficile. Elle peut toucher les immunocompétents mais son pronostic est souvent bon. Un traitement anti-tuberculeux doit être instauré le plus rapidement possible pour éviter les séquelles. PMID:27583077

  7. A standard format for Les Houches Event Files

    NASA Astrophysics Data System (ADS)

    Alwall, J.; Ballestrero, A.; Bartalini, P.; Belov, S.; Boos, E.; Buckley, A.; Butterworth, J. M.; Dudko, L.; Frixione, S.; Garren, L.; Gieseke, S.; Gusev, A.; Hinchliffe, I.; Huston, J.; Kersevan, B.; Krauss, F.; Lavesson, N.; Lönnblad, L.; Maina, E.; Maltoni, F.; Mangano, M. L.; Moortgat, F.; Mrenna, S.; Papadopoulos, C. G.; Pittau, R.; Richardson, P.; Seymour, M. H.; Sherstnev, A.; Sjöstrand, T.; Skands, P.; Slabospitsky, S. R.; Waş, Z.; Webber, B. R.; Worek, M.; Zeppenfeld, D.

    2007-02-01

    A standard file format is proposed to store process and event information, primarily output from parton-level event generators for further use by general-purpose ones. The information content is identical with what was already defined by the Les Houches Accord five years ago, but then in terms of Fortran commonblocks. This information is embedded in a minimal XML-style structure, for clarity and to simplify parsing.

  8. Handbook of Poetic Forms.

    ERIC Educational Resources Information Center

    Padgett, Ron, Ed.

    Intended for secondary teachers and student writers but useful for anyone interested in poetic forms, this book defines 74 basic poetic forms, summarizes their histories, quotes examples from noted poets, and offers professional tricks of the trade on how to use each form. The book covers the following poetic forms: abstract poem, acrostic,…

  9. Bacteria form tellurium nanocrystals

    USGS Publications Warehouse

    Oremland, R.S.

    2007-01-01

    A team of researchers have found two bacterial species that produce tellurium oxyanions as respiratory electron acceptors for growth, leaving elemental tellurium in the form of nanoparticles. The crystals from the two organisms exhibit distinctively different structures. Bacillus selenitireducens initially forms nanorods that cluster together to form rosettes. Sulfurospirillum barnesii forms irregularly-shaped nanospheres that coalesce into larger composite aggregates.

  10. La force de Casimir et les plasmons de surface

    NASA Astrophysics Data System (ADS)

    Intravaia, F.; Lambrecht, A.; Reynaud, S.

    2004-11-01

    La présence de fluctuations irréductibles de champ dans le vide est une prédiction importante de la théorie quantique. Ces fluctuations ont de nombreux effets bien connus, dont l'archétype est la force de Casimir apparaîssant entre deux miroirs placés dans le vide par suite de la pression de radiation du vide. Elle a été récemment mesurée avec une précision de l'ordre du %. De nombreux travaux sont consacrés à l'évaluation théorique de cette force en visant une précision du même ordre. Ici nous étudions la force de Casimir dans la configuration de deux miroirs métalliques plans parallèles à température nulle. En supposant les miroirs décrits par un modèle plasma nous interprétons la force de Casimir comme le résultat de l'interaction entre les plasmons de surface des deux miroirs.

  11. Les fracture-luxations transolécraniennes

    PubMed Central

    Fahsi, Mohamed; Benameur, Hamza; El Andaloussi, Yassir; Bennouna, Driss; Fadili, Mustapha; Nechad, Mohamed

    2015-01-01

    Les fracture-luxations transolécraniennes sont une entité rare des fracture-luxations du coude. Il s'agit d'une lésion complexe qui peut compromettre le pronostic fonctionnel du coude. Dix patients étaient diagnostiqués dans notre service entre janvier 2005 et novembre 2012. Tous nos patients étaient de sexe masculin, l’âge moyen était de 29 ans. Les fractures de l'olécrane étaient complexes et comminutives dans sept cas et simples chez trois patients. Deux cas étaient associés à des fractures de la tête radiale (Mason III) et deux autres à des fractures de l'apophyse coronoïde. Les résultats étaient évalués après un recul moyen de trois ans et demi par le score de BROBERG et MORREY: trois cas étaient excellents, quatre bons, deux moyens et un mauvais. Cette lésion complexe nécessite une bonne reconstruction de la surface articulaire et une réparation des lésions associées pour permettre une rééducation précoce, seul garant d'une bonne récupération fonctionnelle. PMID:26664553

  12. DNS and LES of Separated Flows at Moderate Reynolds Numbers

    NASA Astrophysics Data System (ADS)

    Cadieux, F.; Domaradzki, J. A.; Sayadi, T.; Bose, S.; Duchaine, F.

    2012-11-01

    Flows in rotating machinery, for unmanned and micro aerial vehicles, wind turbines, and propellers consist of different flow regimes. First, a laminar boundary layer is followed by a laminar separation bubble with a shear layer on top of it that experiences transition to turbulence. Subsequently, the separated turbulent flow reattaches and evolves downstream from a nonequilibrium turbulent boundary layer to an equilibrium one. Typical RANS and LES turbulence modeling methods experience difficulties when simulating such flows because they were developed for fully developed turbulent flows. This currently leaves DNS as the only reliable but computationally expensive alternative. Our work assesses the capability of LES to reduce the resolution requirements for such flows. Flow over a flat plate with suitable velocity boundary conditions away from the plate to produce a separation bubble is considered. Benchmark DNS data for this configuration was generated with the resolution of 50 ×106 mesh points; also used was a different DNS database with 15 ×106 points reported by Spalart and Strelets in JFM 403 (2000). Employing two codes, one using structured and another unstructured mesh, we concluded that accurate LES are possible using O(1%) of the DNS resolution. Work performed during Stanford-CTR Summer Program 2012.

  13. Nonequilibrium Behavior of the Daytime Atmospheric Boundary Layer, from LES

    NASA Astrophysics Data System (ADS)

    Jayaraman, Balaji; Brasseur, James; McCandless, Tyler; Haupt, Sue

    2014-11-01

    LES of the daytime atmospheric boundary layer (ABL) over flat topography is universally developed as an equilibrium ABL with steady surface heat flux Q0 and steady unidirectional ``geostrophic'' wind vector Vg above a capping inversion, where Vg also defines a spatially uniform transverse mean pressure gradient. The LES approaches a quasiequilibrium state characterized statistically by the ratio of boundary layer depth to Obukhov length scale. In contrast, the true daytime ABL is driven by surface heat flux increases to peak mid-day and drops in the afternoon, and by mesoscale wind vectors Ug that change in magnitude and direction during the day. We study the consequences of mesoscale weather on ABL dynamics by forcing ABL LES with a WRF simulation of the Midwest during 3 days of frontal passage over Kansas. Assuming horizontal homogeneity, we derive the relationship between Ug and Vg and study ABL response with systematic variation in Q0 and the magnitude and direction of Ug. Interesting results include: (1) asymmetry nonequilibrium diurnal response of the ABL; (2) directional changes in surface layer winds relevant to wind turbine function; and (3) changes in ABL stability state arising solely from changes in the direction of Ug. Supported by DOE. Computer resources by NSF/XSEDE.

  14. Les astronomes de l'Empire du Milieu

    NASA Astrophysics Data System (ADS)

    Bonnet-Bidaud, J. M.

    2007-02-01

    Explosions d'étoiles, comètes, durée du jour, taches solaires, dans tous ces domaines, des observations chinoises datant de plusieurs siècles sont encore utilisées aujourd'hui. Pendant plus de 4000 ans, les astronomes de l'Empire du Milieu, organisés dans les grands observatoires impériaux, ont noté jour après jour, mois après mois, avec la plus grande précision tous les phénomènes célestes. Et ce sont des milliers de textes couvrant des périodes depuis au moins le Ve siècle avant l'ère moderne jusqu'à fin de la dernière dynastie des Qing en 1911, qui ont été conservés et dont une grande partie n'a pu encore être véritablement étudiée. Un véritable trésor, malheureusement très mal connu en Europe et, de façon incompréhensible, largement ignoré par l'histoire moderne des sciences.

  15. Spectres d'absorption X dans les plasmas femtosecondes

    NASA Astrophysics Data System (ADS)

    Bastiani-Ceccotti, S.; Audebert, P.; Renaudin, P.; Chenais-Popovics, C.; Geindre, J. P.; Tzortzakis, S.; Nagels-Silvert, V.; Shepherd, R.; Matsushima, I.; Gary, S.; Girard, F.; Peyrusse, O.; Gauthier, J. C.

    2005-06-01

    Nous avons mesuré le spectre d'absorption en couche K de plasmas d'aluminium à haute densité. Deux faisceaux de la chaîne laser femtoseconde 100 TW du LULI (de durée 300 fs) ont été utilisés pour produire le plasma absorbant sur une feuille mince d'Al (830 Å ou 500 Å), et la source de radiographie sur du samarium massif. Les spectres X étaient résolus spatialement dans une direction perpendiculaire à la direction de la dispersion spectrale. Les spectres ont été mesurés pour différents retards entre la source deradiographie et le plasma d'Al. Des simulations des spectres et de l'ionisation en fonction du temps et de l'intensité, obtenues au moyen de codes hydrodynamiques et de structure atomique, montrent un bon accord avec les résultats expérimentaux.

  16. Ventilation of idealised urban area, LES and wind tunnel experiment

    NASA Astrophysics Data System (ADS)

    Kukačka, L.; Fuka, V.; Nosek, Š.; Kellnerová, R.; Jaňour, Z.

    2014-03-01

    In order to estimate the ventilation of vehicle pollution within street canyons, a wind tunnel experiment and a large eddy simulation (LES) was performed. A model of an idealised urban area with apartment houses arranged to courtyards was designed according to common Central European cities. In the wind tunnel, we assembled a set-up for simultaneous measurement of vertical velocity and tracer gas concentration. Due to the vehicle traffic emissions modelling, a new line source of tracer gas was designed and built into the model. As a computational model, the LES model solving the incompressible Navier-Stokes equations was used. In this paper, we focused on the street canyon with the line source situated perpendicular to an approach flow. Vertical and longitudinal velocity components of the flow with the pollutant concentration were obtained from two horizontal grids placed in different heights above the street canyon. Vertical advective and turbulent pollution fluxes were computed from the measured data as ventilation characteristics. Wind tunnel and LES data were qualitatively compared. A domination of advective pollution transport within the street canyon was determined. However, the turbulent transport with an opposite direction to the advective played a significant role within and above the street canyon.

  17. Characterization of the Pseudomonas aeruginosa recA gene: the Les- phenotype

    SciTech Connect

    Kokjohn, T.A.; Miller, R.V.

    1988-02-01

    The Les- phenotype (lysogeny establishment deficient) is a pleiotropic effect of the lesB908 mutation of Pseudomonas aeruginosa PAO. lesB908-containing strains are also (i) deficient in general recombination, (ii) sensitive to UV irradiation, and (iii) deficient in UV-stimulated induction of prophages. The P. aeruginosa recA-containing plasmid pKML3001 complemented each of these pleiotropic characteristics of the lesB908 mutation, supporting the hypothesis that lesB908 is an allele of the P. aeruginosa recA gene. The phenotypic effects of the lesB908 mutation may be best explained by the hypothesis that the lesB908 gene product is altered in such a way that it has lost synaptase activity but possesses intrinsic protease activity in the absence of DNA damage. The Les- phenotype is a result of the rapid destruction of newly synthesized phage repressor, resulting in lytic growth of the infecting virus. This hypothesis is consistent with the observations that increasing the number of copies of the phage repressor gene by increasing the multiplicity of infection (i.e., average number of phage genomes per cell) or by introducing the cloned phage repressor gene into a lesB908 mutant will also suppress the Les- phenotype in a phage-specific fashion.

  18. A unified RANS–LES model: Computational development, accuracy and cost

    SciTech Connect

    Gopalan, Harish; Heinz, Stefan; Stöllinger, Michael K.

    2013-09-15

    Large eddy simulation (LES) is computationally extremely expensive for the investigation of wall-bounded turbulent flows at high Reynolds numbers. A way to reduce the computational cost of LES by orders of magnitude is to combine LES equations with Reynolds-averaged Navier–Stokes (RANS) equations used in the near-wall region. A large variety of such hybrid RANS–LES methods are currently in use such that there is the question of which hybrid RANS-LES method represents the optimal approach. The properties of an optimal hybrid RANS–LES model are formulated here by taking reference to fundamental properties of fluid flow equations. It is shown that unified RANS–LES models derived from an underlying stochastic turbulence model have the properties of optimal hybrid RANS–LES models. The rest of the paper is organized in two parts. First, a priori and a posteriori analyses of channel flow data are used to find the optimal computational formulation of the theoretically derived unified RANS–LES model and to show that this computational model, which is referred to as linear unified model (LUM), does also have all the properties of an optimal hybrid RANS–LES model. Second, a posteriori analyses of channel flow data are used to study the accuracy and cost features of the LUM. The following conclusions are obtained. (i) Compared to RANS, which require evidence for their predictions, the LUM has the significant advantage that the quality of predictions is relatively independent of the RANS model applied. (ii) Compared to LES, the significant advantage of the LUM is a cost reduction of high-Reynolds number simulations by a factor of 0.07Re{sup 0.46}. For coarse grids, the LUM has a significant accuracy advantage over corresponding LES. (iii) Compared to other usually applied hybrid RANS–LES models, it is shown that the LUM provides significantly improved predictions.

  19. Une forme exceptionnelle de la luxation perilunaire du carpe

    PubMed Central

    Elouakili, Issam; Ouchrif, Younes; Najib, Abdeljaouad; Ouakrim, Redouane; Lamrani, Omar; Kharmaz, Mohammed; Ismael, Farid; Lahlou, Abdo; Elouadghiri, Mohammed; El Bardouni, Ahmed; Mahfoud, Mustapha; Berrada, Mohammed Saleh; El Yaccoubi, Mouradh

    2014-01-01

    Les luxations périlunaires (LPL) du carpe sont des lésions extrêmement rares, qui peuvent passer inaperçue en raison d'un tableau clinique souvent trompeur, des radiographies en profil non strict ou d'interprétation difficile. Nous rapportons l'observation d'une luxation périlunaire stade III selon la classification de Witvoët et Allieu chez un patient de 32 ans, il s'agit d'une forme encore plus rare voire exceptionnelle et qui peut induire de sérieux problèmes en raison de la sévérité des dommages ligamentaires et du risque de nécrose du semilunaire plus important dans ce type de lésions. Le traitement est toujours chirurgical et doit être réalisé dans les plus brefs délais afin d’éviter les complications. PMID:25404968

  20. LES validation for contaminant transport in urban areas

    NASA Astrophysics Data System (ADS)

    Hertwig, D.; Leitl, B.; Schatzmann, M.; Patnaik, G.

    2010-09-01

    Contaminant transport in urban areas poses a major challenge with respect to its simulation with computational fluid dynamics (CFD) models. The use of time-resolved approaches like large-eddy simulation (LES) can provide insight into transient flow and dispersion regimes, which are strongly influenced by the urban geometry. LES models have the potential to resolve the characteristic unsteady flow features and their impact on plume dynamics, whereas standard industrial codes based on Reynolds-averaged Navier-Stokes (RANS) equations can only yield steady state solutions. However, the potential to simulate the energetically dominating part of an inherently unsteady turbulent flow with LES also sets higher requirements for validation strategies. This includes that the evaluation of the model performance must go beyond comparisons of first and second order statistics which were adequate for RANS models and currently provide the basis for most of the validation metrics used as a standard. With regard to an a posteriori validation of model results for atmospheric boundary layer (ABL) flow and dispersion in complex geometry, laboratory data from boundary-layer wind tunnels are of special value. Since inflow and boundary conditions are well-defined, systematic laboratory studies provide high statistical confidence levels of measured quantities. The potential of field measurements - in this regard - is limited due to the natural atmospheric variability. In order to verify the realistic simulation of the spatio-temporal behavior of turbulent eddies, transient flow phenomena have to be characterized in experimental validation data sets as well. This topic is closely linked to structure identification and the characterization of organized motions in ABL flows, for which advanced analysis strategies like wavelet transforms, orthogonal decomposition, or stochastic estimation can be employed. Systematic comparisons of wind-tunnel measurements and LES simulation results are planned

  1. Dissolution de la matiere lignocellulosique dans les liquides ioniques

    NASA Astrophysics Data System (ADS)

    Rebiere, Jeremy

    De nos jours, avec la raréfaction des ressources fossiles, le développement de procédés entrant dans le cadre de la chimie verte s'accentue. De plus, ces procédés utilisent comme ressources, des matériaux d'origine végétale, abondants et biodégradables. Au cours de ces 20 dernières années, la littérature utilisant les liquides ioniques (LI) connait une importante croissance. Ces solvants sont de plus en plus employés dans des réactions chimiques classiques. Cependant le coût de leur synthèse en fait un solvant réactionnel cher dont l'application en tant que tel dans l'industrie ne peut être raisonnablement envisagée. Ces liquides ioniques permettent la dissolution des matériaux lignocellulosiques (lignine ou cellulose) et possèdent des propriétés physico-chimiques intéressantes. Nous savons également que la dissolution de la cellulose par des procédés d'hydrolyse classique s'effectue dans des conditions dures, dues à la structure cristalline de la cellulose, (fortes concentrations en acide) qui paraissent limitées pour une utilisation à grande échelle. Il est donc nécessaire de rechercher des méthodes moins onéreuses et plus efficaces écologiquement. S'appuyant sur des recherches démontrant que la dissolution de la cellulose dans les LI, diminue la cristallinité de la cellulose, nous allons chercher à démontrer au cours de ces travaux, la possibilité d'utiliser les LI comme moyen de prétraitement pour la dissolution de la cellulose. Nous allons nous attacher à dissoudre la cellulose, et à étudier les proportions pouvant être dissoutes. Puis nous chercherons à récupérer puis à réutiliser ces LI. Enfin nous cherchons à caractériser les modifications apportées à notre cellulose. Mots Clés liquide ionique, cellulose, cristallinité, réactivité, dissolution, régénération, non-solvant, purification, prétraitement, zone amorphe.

  2. Les sarcomes des tissus mous: à propos de 33 cas

    PubMed Central

    Abdou, Jiddou; Elkabous, Mustapha; M'rabti, Hind; Errihani, Hassan

    2015-01-01

    L'objectif de cette étude est de rapporter les particularités épidémiologiques, cliniques, histologiques, thérapeutiques et évolutives des sarcomes des tissus mous à l'Institut National d'Oncologie et de définir les facteurs influençant la survie des patients. C'est une étude rétrospective de 33 cas de sarcome des tissus mous, colligés entre janvier 2008 et décembre 2010. Les critères d’éligibilité étaient un âge supérieur à 16 ans, une épreuve histologique d'un sarcome des tissus mous à l'exclusion des tumeurs stromales gastro-intestinales (GIST). Les items recueillis étaient: épidémiologiques, cliniques, histologiques, Radiologiques, et thérapeutiques. Des analyses univariées puis multivariées ont été réalisées à la recherche de facteurs influençant la survie à 2 ans. Il s'agit de 33 cas, 17 Hommes et 16 Femmes, l’âge moyen était de 43,21 ans (Extrêmes= 18-76 ans). La tumeur était localisée aux extrémités dans 24 cas (72,72%). Le type histologique prédominant était le Liposarcome dans 9 cas (27,27%). Le stade tumoral était localisé dans 25 cas (75,8%), métastatique dans 8 cas (24,2%). Vingt-cinq tumeurs ont été traitées chirurgicalement dont 21 cas (84%) de chirurgie conservatrice et 4 cas (16%) de chirurgie radicale. La radiothérapie a été réalisée chez 10 patients (30,3%). La chimiothérapie a été faite chez 20 patients. En analyse univariée les facteurs pronostiques étaient l’âge (p=0,03) et le stade tumoral (p=0,09). L’âge et le stade tumoral sont des facteurs pronostiques influençant la survie des sarcomes des tissus mous. PMID:27022434

  3. Hémogramme chez les hypertendus vus au laboratoire du CHU-HJRB d'Antananarivo en 2013

    PubMed Central

    Rakotovao-Ravahatra, Zafindrasoa Domoina; Randriatsarafara, Fidiniaina Mamy; Razafimanantsoa, Fetralinjiva; Rabetokotany, Felana Ranaivo; Rakotovao, Andriamiadana Luc

    2016-01-01

    Introduction L'hémogramme est un bilan biologique de routine demandé chez tout patient souffrant d'Hypertension Artérielle (HTA). Cette étude se propose de décrire les résultats d'hémogramme chez les hypertendus et d'identifier les pathologies associées. Méthodes Il s'agit d'une étude rétrospective type descriptif s’étalant du 01 Décembre 2012 au 31 Décembre 2013 au laboratoire du Centre Hospitalo-Universitaire Hôpital Joseph Raseta Befelatanana (CHU-HJRB) d'Antananarivo. Tous les registres des résultats des hypertendus demandant un hémogramme ont été exploités. Résultats Parmi les 151 hypertendus, 91 (60,3%) ont présenté des hémogrammes pathologiques. Parmi ces derniers, 64 (70,4%) ont montré un seul type d'anomalie et 27 (29,6%) des anomalies multiples. Les anémies (33,91%), les hyperleucocytoses (33,04%), les polyglobulies (10,43%) et les leucopénies (9,57%) sont les plus fréquentes. Pour les anomalies multiples, les anémies associées aux hyperleucocytoses sont les plus observées (29,6%). Les anémies microcytaires (41%) et les hyperleucocytoses à polynucléaires neutrophiles sont les plus dominantes (47,4%). Les patients hospitalisés en néphrologie (90%) et en endocrinologie (81,3%) sont les plus concernés (p = 0,008). Les hypertendus moins de 20 ans (100%) et les femmes (61,5%) sont les plus affectés (p > 0,05). Les crises convulsives (100%), les œdèmes des membres inférieurs (100%) et le diabète (70%) sont les signes et pathologies associés les plus rencontrés (p > 0,05). Conclusion L'hémogramme doit être prescrit chez tout patient hypertendu pour connaître les affections sous-jacentes qui seront traitées simultanément avec l'HTA. Ainsi, le patient hypertendu sera pris en charge convenablement et son espérance de vie sera améliorée. PMID:27217875

  4. Transport et bruit quantique dans les fils mésoscopiques

    NASA Astrophysics Data System (ADS)

    Torrès, J.

    2002-01-01

    Un conducteur quantique est bien caractérisé par sa conductance donnée par la formule de Landauer. Mais le bruit contient davantage d'informations que la conductance : il mesure les fluctuations temporelles du courant autour de sa valeur moyenne. De plus, le signe des corrélations de bruit est lié à la statistique des porteurs de charge. Dans une jonction entre un métal normal et un supraconducteur, le bruit présente une singularité à la fréquence Josephson, signature de la charge 2e des paires de Cooper impliquées dans le transport. Lorsque la tension appliquée est supérieure au gap du supraconducteur, la courbe du bruit exhibe des singularités à plusieurs fréquences auxquelles on peut associer un processus de réflexion ou de transmission. L'analogue fermionique de l'expérience d'Hanbury-Brown et Twiss avec un supraconducteur permet d'observer à la fois des corrélations positives et négatives dans un même système. Maintenir une différence de potentiel entre les deux extrémités d'un fil crée une situation relevant de la thermodynamique hors de l'équilibre. Formellement, on peut se ramener à un calcul à l'équilibre et écrire une théorie des perturbations grâce à la méthode de Keldysh. La théorie des liquides de Luttinger décrit les systèmes unidimensionnels d'électrons en interaction. Le hamiltonien peut se mettre sous forme quadratique grâce à la bosonisation. D'autre part, un liquide de Luttinger chiral constitue un bon modèle des états de bord de l'effet Hall quantique fractionnaire. Grâce au formalisme de Keldysh, on peut retrouver une formule de type Schottky et identifier la charge des quasiparticules de Laughlin.

  5. Second-order closure PBL model with new third-order moments: Comparison with LES data

    NASA Technical Reports Server (NTRS)

    Canuto, V. M.; Minotti, F.; Ronchi, C.; Ypma, R. M.; Zeman, O.

    1994-01-01

    This paper contains two parts. In the first part, a new set of diagnostic equations is derived for the third-order moments for a buoyancy-driven flow, by exact inversion of the prognostic equations for the third-order moment equations in the stationary case. The third-order moments exhibit a universal structure: they all are a linear combination of the derivatives of all the second-order moments, bar-w(exp 2), bar-w theta, bar-theta(exp 2), and bar-q(exp 2). Each term of the sum contains a turbulent diffusivity D(sub t), which also exhibits a universal structure of the form D(sub t) = a nu(sub t) + b bar-w theta. Since the sign of the convective flux changes depending on stable or unstable stratification, D(sub t) varies according to the type of stratification. Here nu(sub t) approximately equal to wl (l is a mixing length and w is an rms velocity) represents the 'mechanical' part, while the 'buoyancy' part is represented by the convective flux bar-w theta. The quantities a and b are functions of the variable N(sub tau)(exp 2), where N(exp 2) = g alpha derivative of Theta with respect to z and tau is the turbulence time scale. The new expressions for the third-order moments generalize those of Zeman and Lumley, which were subsequently adopted by Sun and Ogura, Chen and Cotton, and Finger and Schmidt in their treatments of the convective boundary layer. In the second part, the new expressions for the third-order moments are used to solve the ensemble average equations describing a purely convective boundary laye r heated from below at a constant rate. The computed second- and third-order moments are then compared with the corresponding Large Eddy Simulation (LES) results, most of which are obtained by running a new LES code, and part of which are taken from published results. The ensemble average results compare favorably with the LES data.

  6. Forms of Arthritis

    MedlinePlus

    ... this page please turn Javascript on. Forms of Arthritis Past Issues / Fall 2006 Table of Contents Today, ... of Linda Saisselin Osteoarthritis (OA) — the form of arthritis typically occurring during middle or old age, this ...

  7. Forms of Arthritis

    MedlinePlus

    ... stiffness, inflammation, swelling and, sometimes, destruction of joints. Gout — a form of arthritis that occurs when uric ... the joints. Some 2.1 million Americans have gout. Lupus — a form of arthritis, like rheumatoid arthritis, ...

  8. Comparison of linear and nonlinear subgrid scale model for hybrid RANS/LES modelling

    NASA Astrophysics Data System (ADS)

    Straka, Petr

    2016-06-01

    The contribution deals with application of the hybrid RANS/LES model for calculation of flow around the circular cylinder. Used hybrid RANS/LES model is based on transport equation for the kinetic energy which is shared in both RANS and LES modes. The linear and the nonlinear closure formulas are described in the paper. Numerical results are compared with the experimental data. Results show that the nonlinear model predicts development of the wake behind the cylinder better than the linear model.

  9. L’évaluation du risque cardiaque avant l’utilisation de stimulants chez les enfants et les adolescents

    PubMed Central

    Bélanger, SA; Warren, AE; Hamilton, RM; Gray, C; Gow, RM; Sanatani, S; Côté, J-M; Lougheed, J; LeBlanc, J; Martin, S; Miles, B; Mitchell, C; Gorman, DA; Weiss, M; Schachar, R

    2009-01-01

    Les décisions en matière de réglementation et les documents scientifiques au sujet de la prise en charge du trouble de déficit de l’attention avec hyperactivité (TDAH) soulèvent des questions quant à l’innocuité des médicaments et à l’évaluation convenable à effectuer avant le traitement afin de déterminer la pertinence d’une pharmacothérapie. Ce constat est particulièrement vrai en présence de cardiopathies structurelles ou fonctionnelles. Le présent article contient l’analyse des données disponibles, y compris les publications révisées par des pairs, des données tirées du site Web de la Food and Drug Administration des États-Unis au sujet des réactions indésirables déclarées chez des enfants qui prennent des stimulants, ainsi que des données de Santé Canada sur le même problème. Des lignes directrices consensuelles sur l’évaluation pertinente sont proposées d’après l’apport des membres de la Société canadienne de pédiatrie, de la Société canadienne de cardiologie et de l’Académie canadienne de psychiatrie de l’enfant et de l’adolescent, qui possèdent notamment des compétences et des connaissances précises tant dans le secteur du TDAH que de la cardiologie pédiatrique. Le présent document de principes prône une anamnèse et un examen physique détaillés avant la prescription de stimulants et s’attarde sur le dépistage des facteurs de risque de mort subite, mais il ne contient pas de recommandations systématiques de dépistage électrocardiographique ou de consultations avec un spécialiste en cardiologie, à moins que les antécédents ou que l’examen physique ne le justifient. Le document contient un questionnaire pour repérer les enfants potentiellement vulnérables à une mort subite (quel que soit le type de TDAH ou les médicaments utilisés pour le traiter). Même si les recommandations dépendent des meilleures données probantes disponibles, le comité s’entend pour affirmer que

  10. Mesonic Form Factors

    SciTech Connect

    Frederic D. R. Bonnet; Robert G. Edwards; George T. Fleming; Randal Lewis; David Richards

    2003-07-22

    We have started a program to compute the electromagnetic form factors of mesons. We discuss the techniques used to compute the pion form factor and present preliminary results computed with domain wall valence fermions on MILC asqtad lattices, as well as Wilson fermions on quenched lattices. These methods can easily be extended to rho-to-gamma-pi transition form factors.

  11. Method for forming ammonia

    DOEpatents

    Kong, Peter C.; Pink, Robert J.; Zuck, Larry D.

    2008-08-19

    A method for forming ammonia is disclosed and which includes the steps of forming a plasma; providing a source of metal particles, and supplying the metal particles to the plasma to form metal nitride particles; and providing a substance, and reacting the metal nitride particles with the substance to produce ammonia, and an oxide byproduct.

  12. Forms in Space.

    ERIC Educational Resources Information Center

    Moore, Paula

    1998-01-01

    Uses the work of M. C. Escher to instruct upper elementary students in the transformation of flat shape into three-dimensional form. Outlines the lesson as a series of sections: (1) reviewing form drawing; (2) creating three-dimensional effects; (3) imagining the forms in an inhabited world; and (4) using color and shading. (DSK)

  13. Le gingembre contre la nausée et les vomissements de la grossesse

    PubMed Central

    Lindblad, Adrienne J.; Koppula, Sudha

    2016-01-01

    Question clinique Le gingembre peut-il traiter la nausée et les vomissements de la grossesse? Résultats Durant le premier trimestre, le gingembre soulagerait la nausée et les vomissements de quelque 4 points sur une échelle de 40 points, ou éliminerait les vomissements chez 1 femme sur 3 au jour 6. L’étude la plus vaste ne laisse croire à aucune hausse des malformations congénitales ou de la mortinatalité, mais les études de moins grande envergure laissent croire le contraire.

  14. La planification préalable des soins pour les patients en pédiatrie

    PubMed Central

    2008-01-01

    RÉSUMÉ Les progrès médicaux et technologiques ont permis d’ac-croître les taux de survie et d’améliorer la qualité de vie des nourrissons, des enfants et des adolescents ayant des maladies chroniques mettant la vie en danger. La planifi-cation préalable des soins inclut le processus relié aux discussions sur les traitements essentiels au maintien de la survie et la détermination des objectifs des soins de longue durée. Les dispensateurs de soins pédiatriques ont l’obligation éthique d’assimiler cet aspect des soins médicaux. Le présent document de principes vise à aider les dispensateurs de soins à discuter de la planification préalable des soins des patients pédiatriques dans diverses situations. La planification préalable des soins exige des communications efficaces afin de clarifier les objectifs des soins et de s’entendre sur les traitements pertinents ou non pour réaliser ces objectifs, y compris les mesures de réanimation et les mesures palliatives.

  15. Les Ambivalences du Silence: Les "Maximes" de la Rochefoucauld Par Quatre Chemins

    ERIC Educational Resources Information Center

    Turcat, Eric

    2012-01-01

    Maxims are famous for their moral pronouncements, yet La Rochefoucauld's "Maximes" (1678) have become infamous for offering little moral guidance. Morally ambivalent at best, the "Maximes" are also less known for their other forms of ambivalence, whether rhetorical, psychological, anthropological or linguistic. Such are…

  16. Une vie saine et active : des directives en matière d’activité physique chez les enfants et les adolescents

    PubMed Central

    Lipnowski, Stan; LeBlanc, Claire MA

    2012-01-01

    RÉSUMÉ L’épidémie d’obésité juvénile augmente partout dans le monde. Même si les facteurs de risque d’obésité sont multifactoriels, bon nombre sont liés au mode de vie et se prêtent à une intervention. Ces facteurs incluent le comportement sédentaire et la thermogenèse sans activité physique, de même que la fréquence, l’intensité, la quantité et le type d’activité physique. Les dispensateurs de soins de première ligne sont en position idéale pour surveiller le taux d’activité physique des enfants, des adolescents et de leur famille, évaluer les choix liés au mode de vie et offrir des conseils pertinents. Le présent document de principes contient des directives visant à réduire le comportement sédentaire et à accroître le taux d’activité physique au sein de la population pédiatrique. Des recommandations d’activités physiques adaptées au développement et visant les nourrissons, les tout-petits, les enfants d’âge préscolaire, les enfants et les adolescents sont présentées. Des stratégies de promotion d’une vie saine et active sur les scènes locale, municipale, provinciale, territoriale et fédérale sont proposées.

  17. Methods of forming steel

    DOEpatents

    Branagan, Daniel J.; Burch, Joseph V.

    2001-01-01

    In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

  18. Transition de phase quantique de type verrouillage-deverrouillage dans les canaux lineaires coherents des phases en rayures dans les doubles puits quantiques sous champ magnetique perpendiculaire

    NASA Astrophysics Data System (ADS)

    Faribault, Alexandre

    On peut creer un gaz electronique bidimensionnel en utilisant le potentiel de confinement d'une couche mince d'un semiconducteur dans un substrat fait d'une autre semiconducteur de gap plus eleve. L'ajout d'un champ magnetique perpendiculaire au plan de confinement modifie de facon drastique les proprietes du gaz electronique. Pour des densites et des valeurs du champ magnetique adequatement choisies, on obtient un etat fondamental en onde de densite de charge. Dans un systeme compose de deux de ces gaz bidimensionnels suffisamment rapproches l'un de l'autre, on prevoit theoriquement l'existence d'un etat fondamental compose d'une onde de densite de charge dans chacun des puits et d'une serie de regions lineaires ou l'on a une delocalisation coherente des electrons entre les deux puits. Dans cette these, on etudie le comportement a temperature nulle de cet etat fondamental en rayures coherentes. L'etude numerique des modes collectifs de ces phases laisse croire qu'un deverrouillage des canaux coherents est envisageable dans ce systeme. Afin d'etudier cette possibilite, nous construisons d'abord un modele effectif de canaux quasi-unidimensionnels couples qui permettent de reproduire correctement les excitations collectives a basse energie de la phase en rayures coherentes du double puits quantique. Dans un systeme de coordonnees adequatement choisi, ces excitations peuvent etre decrites par des ondes de pseudospin. Les parametres de ce modele effectif simple peuvent etre extraits des calculs des fonctions de reponse realises dans l'approximation Hartree-Fock dependante du temps (appelee aussi Generalized Random Phase Approximation). On constate l'efficacite de ce modele a decrire la dynamique basse energie du systeme pour une certaine plage de distances inter-puits. En retirant de ce modele les contributions a l'hamiltonien provenant des couplages de type Josephson entre les canaux, on obtient alors un systeme ou les canaux sont deverrouilles. Un traitement en

  19. Grid Effects on LES Thermo-Acoustic Limit-Cycle of a Full Annular Aeronautical Engine

    NASA Astrophysics Data System (ADS)

    Wolf, Pierre; Gicquel, Laurent Y. M.; Staffelbach, Gabriel; Poinsot, Thierry

    Recent developments in large scale computer architectures allow Large Eddy Simulation (LES) to be considered for the prediction of turbulent reacting flows in geometries encountered in industry. To do so, various difficulties must be overcome and the first one is to ensure that proper meshes can be used for LES. Indeed, the quality of meshes is known to be a critical factor in LES of reacting flows. This issue becomes even more crucial when LES is used to compute large configurations such as full annular combustion chambers. Various analysis of mesh effects on LES results have been published before but all are limited to single-sector computational domains. However, real annular gas-turbine engines contain ten to twenty of such sectors and LES must also be used in such full chambers for the study of ignition or azimuthal thermo-acoustic interactions. Instabilities (mostly azimuthal modes involving the full annular geometry) remain a critical issue to aeronautical or power-generation industries and LES seems to be a promising path to properly apprehend such complex unsteady couplings. Based on these observations, mesh effects on LES in a full annular gas-turbine combustion chamber (including its casing) is studied here in the context of its azimuthal thermo-acoustic response. To do so, a fully compressible, multi-species reacting LES is used on two meshes yielding two fully unsteady turbulent reacting predictions of the same configuration. The two tetrahedra meshes contain respectively 38 and 93 millions cells. Limit-cycles as obtained by the two LES are gauged against each other for various flow quantities such as mean velocity profiles, flame position and temperature fields. The thermo-acoustic limit-cycles are observed to be relatively indepedent of the grid resolution which comforts the use of LES tools to provide insights and understanding of the mechanisms triggering the coupling between the system acoustic eigenmodes and combustion.

  20. La prévention des blessures dans les terrains de jeux

    PubMed Central

    Fuselli, Pamela; Yanchar, Natalie L

    2012-01-01

    RÉSUMÉ Dans un climat d’inquiétude croissante à l’égard de l’obésité juvénile et de l’inactivité, les terrains de jeux permettent aux enfants d’être actifs. Ils comportent toutefois aussi des risques, les blessures causées par des chutes étant de loin les plus courants. Les recherches démontrent la possibilité de réduire les blessures dans les terrains de jeux si on abaisse la hauteur des structures de jeu et si on utilise des surfaces molles et profondes pour amortir les chutes. L’Association canadienne de normalisation a publié des normes volontaires qu’elle a mises à jour plusieurs fois pour tenir compte de ces risques. Afin de contribuer à les réduire, les parents peuvent respecter des stratégies simples. Le présent document de principes souligne le fardeau des blessures subies dans les terrains de jeux. Il procure également aux parents et aux dispensateurs de soins des occasions de réduire l’incidence et la gravité des blessures grâce à l’éducation et à la défense d’intérêts, ainsi que de mettre en œuvre des normes de sécurité probantes et des stratégies plus sécuritaires dans les terrains de jeux locaux. Enfin, il remplace le document de principes de la Société canadienne de pédiatrie publié en 2002 sur le sujet.

  1. Les recommandations de prise en charge des complications métaboliques associées aux antipsychotiques de deuxième génération chez les enfants et les adolescents

    PubMed Central

    Ho, Josephine; Panagiotopoulos, Constadina; McCrindle, Brian; Grisaru, Silviu; Pringsheim, Tamara

    2012-01-01

    HISTORIQUE : Les antipsychotiques de deuxième génération s’associent souvent à des complications métaboliques. Ces médicaments sont utilisés plus souvent pour le traitement des troubles de santé mentale chez les enfants, ce qui a requis l’élaboration de lignes directrices officielles sur la surveillance de leur innocuité et de leur efficacité. Des lignes directrices ont déjà été élaborées pour surveiller les complications métaboliques et neurologiques. Afin d’aider les praticiens qui effectuent ces interventions de surveillance, une série de recommandations thérapeutiques complémentaires a été élaborée pour les cas où l’on observe des mesures ou des résultats anormaux. OBJECTIF : Créer des recommandations probantes afin de contribuer à la prise en charge des complications métaboliques chez les enfants traités au moyen d’antipsychotiques de deuxième génération. MÉTHODOLOGIE : Les auteurs ont procédé à une analyse systématique des publications sur les complications métaboliques des antipsychotiques de deuxième génération chez les enfants. Les membres du groupe consensuel ont évalué l’information recueillie grâce à l’analyse bibliographique systématique et ont fait appel à un processus de groupe nominal pour parvenir à un consensus à l’égard de recommandations thérapeutiques. Dans la mesure du possible, ils se sont reportés aux lignes directrices existantes sur l’évaluation et le traitement des anomalies métaboliques chez les enfants. RÉSULTATS : Des recommandations probantes sont présentées pour contribuer à la prise en charge des complications métaboliques, y compris la prise de poids, l’augmentation du tour de taille, l’élévation des taux de prolactine, de cholestérol, de triglycérides et de glucose, les épreuves de fonction hépatique anormales et les études thyroïdiennes anormales. CONCLUSION : Il faut recourir à des mesures de surveillance convenables lorsqu’on prescrit

  2. LES of Langmuir supercells under constant crosswind tidal forcing

    NASA Astrophysics Data System (ADS)

    Walker, Rachel; Zhang, Jie; Juha, Mario; Gosch, Chester; Tejada-Martinez, Andres

    2015-11-01

    We report on the impact of a crosswind tidal current on Langmuir supercells (LSCs) in shallow water computed via LES. LSCs consist of parallel counter rotating vortices engulfing the water column in unstratified conditions. These cells have been observed in shallow continental shelf regions of ~15 meters depth during the passage of storms. The cells are aligned roughly in the wind direction and are generated by the interaction of the wind-driven shear current with the Stokes drift velocity induced by surface gravity waves. Without tides, LES reveals that the typical crosswind width of a LSC is ~4 times the water column depth (H). Under a relatively weak crosswind tidal current (weaker than the downwind current), the constant crosswind tidal forcing applied causes a merging of cells leading to cells of width ~8H. The opposite occurs under a crosswind tidal current stronger than the downwind current as the constant crosswind tidal force is able to break up the LSCs giving rise to smaller scale cells with different turbulent structure than that associated with LSC. Statistics of the turbulence during strong and weak crosswind tides will be contrasted and implications of an oscillating crosswind tidal force will be discussed. Support from the US National Science Foundation and the Gulf of Mexico Research Initiative is gratefully acknowledged.

  3. LES with wall models for trailing-edge flow prediction

    NASA Astrophysics Data System (ADS)

    Wang, Meng; Cabot, William; Moin, Parviz

    1999-11-01

    Large-eddy simulation of wall-bounded turbulent flows becomes formidably expensive at high Reynolds numbers, unless the severe near-wall resolution requirement is removed though the use of a suitable wall model. The applicability of this approach to complex turbulent flows with separation is assessed by considering turbulent boundary layer flows past an asymmetric trailing-edge and the associated aeroacoustics. A simple stress balance model coupled with a mixing-length eddy viscosity, with or without pressure gradient imposed from the outer LES solution, is found to predict velocity statistics fairly well compared with those from the resolved LES, at less than 10 % of the original computational cost. In particular, the separation point near the trailing-edge is predicted correctly. The pressure gradient term is found necessary for the model to capture the correct behavior of the wall shear-stress in the favorable pressure gradient region. Numerical experiments using more elaborate wall models based on approximate boundary layer equations are underway. The effect of wall-modeling on the prediction of surface pressure fluctuations and noise radiation is investigated, and the results will be discussed.

  4. High speed turbulent reacting flows: DNS and LES

    NASA Technical Reports Server (NTRS)

    Givi, Peyman

    1990-01-01

    Work on understanding the mechanisms of mixing and reaction in high speed turbulent reacting flows was continued. Efforts, in particular, were concentrated on taking advantage of modern computational methods to simulate high speed turbulent flows. In doing so, two methodologies were used: large eddy simulations (LES) and direct numerical simulations (DNS). In the work related with LES the objective is to study the behavior of the probability density functions (pdfs) of scalar properties within the subgrid in reacting turbulent flows. The data base obtained by DNS for a detailed study of the pdf characteristics within the subgrid was used. Simulations are performed for flows under various initializations to include the effects of compressibility on mixing and chemical reactions. In the work related with DNS, a two-dimensional temporally developing high speed mixing layer under the influence of a second-order non-equilibrium chemical reaction of the type A + B yields products + heat was considered. Simulations were performed with different magnitudes of the convective Mach numbers and with different chemical kinetic parameters for the purpose of examining the isolated effects of the compressibility and the heat released by the chemical reactions on the structure of the layer. A full compressible code was developed and utilized, so that the coupling between mixing and chemical reactions is captured in a realistic manner.

  5. LES on unstructured deforming meshes: Towards reciprocating IC engines

    NASA Technical Reports Server (NTRS)

    Haworth, D. C.; Jansen, K.

    1996-01-01

    A variable explicit/implicit characteristics-based advection scheme that is second-order accurate in space and time has been developed recently for unstructured deforming meshes (O'Rourke & Sahota 1996a). To explore the suitability of this methodology for Large-Eddy Simulation (LES), three subgrid-scale turbulence models have been implemented in the CHAD CFD code (O'Rourke & Sahota 1996b): a constant-coefficient Smagorinsky model, a dynamic Smagorinsky model for flows having one or more directions of statistical homogeneity, and a Lagrangian dynamic Smagorinsky model for flows having no spatial or temporal homogeneity (Meneveau et al. 1996). Computations have been made for three canonical flows, progressing towards the intended application of in-cylinder flow in a reciprocating engine. Grid sizes were selected to be comparable to the coarsest meshes used in earlier spectral LES studies. Quantitative results are reported for decaying homogeneous isotropic turbulence, and for a planar channel flow. Computations are compared to experimental measurements, to Direct-Numerical Simulation (DNS) data, and to Rapid-Distortion Theory (RDT) where appropriate. Generally satisfactory evolution of first and second moments is found on these coarse meshes; deviations are attributed to insufficient mesh resolution. Issues include mesh resolution and computational requirements for a specified level of accuracy, analytic characterization of the filtering implied by the numerical method, wall treatment, and inflow boundary conditions. To resolve these issues, finer-mesh simulations and computations of a simplified axisymmetric reciprocating piston-cylinder assembly are in progress.

  6. LES of an ignition sequence in a gas turbine engine

    SciTech Connect

    Boileau, M.; Staffelbach, G.; Cuenot, B.; Poinsot, T.; Berat, C.

    2008-07-15

    Being able to ignite or reignite a gas turbine engine in a cold and rarefied atmosphere is a critical issue for many manufacturers. From a fundamental point of view, the ignition of the first burner and the flame propagation from one burner to another are phenomena that are usually not studied. The present work is a large eddy simulation (LES) of these phenomena. To simulate a complete ignition sequence in an annular chamber, LES has been applied to the full 360 geometry, including 18 burners. This geometry corresponds to a real gas turbine chamber. Massively parallel computing (700 processors on a Cray XT3 machine) was essential to perform such a large calculation. Results show that liquid fuel injection has a strong influence on the ignition times. Moreover, the rate of flame progress from burner to burner is much higher than the turbulent flame speed due to a major effect of thermal expansion. This flame speed is also strongly modified by the main burner aerodynamics due to the swirled injection. Finally, the variability of the combustor sectors and quadrant ignition times is highlighted. (author)

  7. Investigation of pressure gradient aware wall modeling in LES

    NASA Astrophysics Data System (ADS)

    Thiry, Olivier; Winckelmans, Gregoire; Duponcheel, Matthieu

    2015-11-01

    This work focuses on the investigation of various wall modeling strategies for the simulation of high Reynolds number wall-bounded turbulent flows with acceleration and/or deceleration. Our code is based on fourth order finite differences, is momentum conserving, and is energy conserving up to fourth order. We here use a ``channel flow'' set-up, with no slip and wall modeling at the bottom, with slip at the top, and with blowing and/or suction at the top in order to generate the desired acceleration-deceleration profile. Two strategies are investigated and compared. Pressure gradient corrected algebraic models are first considered, and we investigate various local averaging techniques so as to avoid imposing mean profile laws pointwise. RANS sub-layer models are then also considered, where the turbulent viscosity is corrected to account for pressure gradient effects and for resolved LES fluctuations effects. A wall-resolved LES was also performed to provide a reference solution. Research fellow (Ph.D. student) at the F.R.S. - FNRS (Belgium).

  8. Les médicaments à libération prolongée pour les enfants et les adolescents ayant un trouble de déficit de l’attention avec hyperactivité

    PubMed Central

    Feldman, M; Bélanger, S

    2009-01-01

    Le trouble de déficit de l’attention avec hyperactivité (TDAH) touche un enfant canadien sur 20 et s’associe à un dossier scolaire et à un registre d’emploi défavorables, à des taux élevés de blessures et de consommation de drogues ou d’alcool, à des relations interpersonnelles médiocres, à de mauvaises issues en santé mentale et à une qualité de vie insatisfaisante. Des essais contrôlés démontrent que les médica-ments sont efficaces pour traiter les symptômes de TDAH tandis que des études d’observation indiquent qu’ils s’associent à de meilleures issues sociales et de santé. De nombreuses familles, ainsi que leur médecin traitant, préfèrent les médicaments à libération prolongée (LP) contre le TDAH aux médicaments à libération immédiate (LI) et à action brève. Toutefois, les préparations à LP sont souvent inabor-dables pour les familles, dont un nombre disproportionné fait partie de la strate à faible statut socioéconomique. Le présent document de principes vise à proposer une évaluation critique des données probantes sur l’efficacité relative des médicaments à LP par rapport aux médicaments à LI ainsi que des recommandations au sujet de leur utilisation convenable dans le traitement du TDAH. Lorsque les médicaments sont indiqués, il faut envisager d’utiliser des préparations à LP comme traitement de première intention contre le TDAH parce qu’elles sont plus efficaces et moins susceptibles d’être détournées. Les futures recherches et les analyses coûts-avantages doivent tenir compte à la fois de l’efficacité de médicaments dans des études contrôlées et de leur efficacité clinique en situation réelle ainsi que du potentiel de détournement et de mésusage de ces médicaments. L’industrie, les sociétés d’assurance et le gouvernement doivent collaborer pour rendre ces médicaments accessibles à tous les enfants et adolescents ayant un TDAH.

  9. Le renforcement de l'interface entre les services de santé publique et de première ligne : enjeux et pistes de solution

    PubMed Central

    Paquette, Daniel; Reinharz, Daniel

    2009-01-01

    Le développement de liens étroits entre la santé publique et les services cliniques, notamment ceux offerts par les médecins de famille œuvrant en première ligne, est prôné dans tous systèmes de santé occidentaux. On suppose que les collaborations formant une telle interface ont des impacts positifs à la fois sur la qualité des soins, sur le fardeau des maladies et sur l'équité dans le système de santé. Si les acteurs des deux domaines admettent le bien-fondé de l'interface et favorisent en principe son développement, plusieurs barrières nuisent aux collaborations dans la réalité. Or, peu est connu sur ces barrières dans le système de santé québécois. Cette étude vise à répondre à ce manque d'information en étudiant l'interface à partir d'une perspective organisationnelle. Deux cadres conceptuels ont été utilisés, soit la typologie de Lasker (1997) et les archétypes de Hinings et Greenwood (1988). L'analyse met en évidence deux des six formes de collaboration proposées par la typologie utilisée, soit la coordination des services aux individus et la mise à profit des rencontres cliniques pour les fins de la santé publique. Les activités associées à ces formes de collaboration, qui sont importantes eu égard au mandat de la santé publique, comportent un intérêt essentiellement pour la santé publique et sont déterminées en pratique unilatéralement par cette dernière. En outre, le manque de coordination des activités qui impliquent une collaboration avec les médecins constitue un obstacle au développement de telles activités en créant des irritants pour les médecins. Il y a donc, dans le système de santé québécois, des possibilités de développement de l'interface là où la collaboration se fait également au profit du travail clinique et là où elle tient compte des contraintes du milieu clinique. PMID:20436801

  10. The DOE Atmospheric Radiation Measurement Program's LES ARM Symbiotic Simulation and Observation (LASSO) Workflow: Initialization, Forcing and Multiscale Data Assimilation

    NASA Astrophysics Data System (ADS)

    Li, Z.; Cheng, X.; Gustafson, W. I., Jr.; Xiao, H.; Endo, S.; Vogelmann, A. M.; Toto, T.

    2015-12-01

    The Department of Energy Atmospheric Radiation Measurement (ARM) Program is developing a routine large-eddy simulation (LES) modeling framework at the ARM Climate Research Facility sites, known as the "LES ARM Symbiotic Simulation and Observation" (LASSO) Workflow. The routine simulations will be assessed using comprehensive ARM observations of the atmosphere and land-surface states, particularly cloud observations. Since small changes in thermodynamic profiles can manifest large changes in cloud properties, successful simulations require careful initialization, appropriate forcing, and possibly suitable lateral boundary conditions. We use a multiscale data assimilation (MS-DA) system as a major methodology for producing forcing datasets required by the LES modeling. The MS-DA will be implemented in the regional Weather Research and Forecasting (WRF) model at a cloud resolving resolution (~1 km). MS-DA leverages existing reanalyses (e.g., the NCEP North American Regional Reanalysis, NARR) and operational forecasting products (e.g. the North American Mesoscale Forecast System, NAM; the High-Resolution Rapid Refresh, HRRR) products, and takes advantage of ARM observations to directly constrain the spectra of horizontal scales down to a few km. The analysis from the MS-DA allows deriving initial conditions and forcing datasets for a range of spatial and temporal scales, developing hydrometeor forcing, exploring time-varying boundary conditions, and diagnosing other needed thermodynamic variables. It is stressed that the datasets from the MS-DA are integrated with datasets from other sources to form ensembles to account for uncertainties. The methodologies, implementation and evaluations are presented.

  11. Strategies for comparing LES and experimental data of urban turbulence

    NASA Astrophysics Data System (ADS)

    Hertwig, D.; Nguyen van yen, R.; Patnaik, G.; Leitl, B.

    2012-12-01

    Unsteady flow within and above built environments is an important example of the complex nature of near-surface atmospheric turbulence. Typically, obstacle-resolving micro-scale meteorological models based on the Reynolds-averaged conservation equations are adopted to investigate and predict the mean-states of urban flow phenomena. The rapid advancements in computer capacities, however, fostered the use of time-resolved approaches like large-eddy simulation (LES) for applications on the urban micro-scale. LES has the potential to provide a realistic picture of the spatio-temporal behavior of turbulent flows within and above the urban canopy layer, which cannot be easily achieved with classic in-situ micro-meteorological measurements. The further success of eddy-resolving techniques, however, is coupled to the critical assessment of the model performance in terms of a rigorous validation against suitable reference data. This task is particularly challenging with regard to the time-dependent nature of the problem and the need to verify whether the model predicts turbulence structures in a realistic way. In this study, a hierarchy of validation strategies for urban LES flow fields is formulated and systematically applied. The test case is neutrally stratified turbulent flow in the inner city of Hamburg, Germany. The LES computations were conducted by the U.S. Naval Research Laboratory on the basis of a monotone integrated LES methodology. Reference experiments in terms of single-point, high resolution time-series measurements were carried out in the boundary-layer wind-tunnel facility at the University of Hamburg. The wind-tunnel model was built on a scale of 1:350 and included building structures with a full-scale spatial resolution of 0.5 m. Benchmark parameters for the congruent representation of atmospheric inflow conditions in the physical and the numerical model were obtained from long-term sonic anemometer measurements at a suburban meteorological field site

  12. Relation entre les caractéristiques des table-bancs et les mesures anthropométriques des écoliers au Benin

    PubMed Central

    Falola, Stève Marjelin; Gouthon, Polycarpe; Falola, Jean-Marie; Fiogbe, Michel Armand; Nigan, Issiako Bio

    2014-01-01

    Introduction Le mobilier scolaire et la posture assise en classe sont souvent impliqués dans l'apparition des douleurs rachidiennes, influant de fait sur la qualité des tâches réalisées par les apprenants. Aucune étude n'a encore vérifié le degré d'adéquation entre les caractéristiques du mobilier et celles des écoliers au Bénin. L'objectif de cette étude transversale est donc de déterminer la relation entre les dimensions des table-bancs utilisées en classe et les mesures anthropométriques des écoliers au Bénin. Methods Elle a été réalisée avec un échantillon probabiliste de 678 écoliers, âgés de 4 à 17 ans. Les mesures anthropométriques des écoliers et les mensurations relatives aux longueurs, largeurs et hauteurs des table-bancs ont été mesurées, puis intégrées aux équations proposées dans la littérature. Les pourcentages des valeurs situées hors des limitesacceptables, dérivées de l'application des équations ont été calculés. Results La largeur et la hauteur des table-bancs utilisées par les écoliers étaient plus élevées (p < 0,05) que les valeurs de référence recommandées par les structures officielles de contrôle et de production des mobiliers scolaires au Bénin. Quel que soit le sexe, il y avait une inadéquation entre la largeur du banc et la longueur fesse-poplité, puis entre la hauteur de la table et la distance coude-bancdes écoliers. Conclusion Les résultats suggèrent de prendre en compte l’évolution des mesures anthropométriques des écoliers dans la confection des table-bancs, afin de promouvoir de bonnes postures assises en classe et de réduire le risque de troubles du rachis. PMID:25317232

  13. STS-47 MS Davis dons LES with technicians' help prior to JSC bailout training

    NASA Technical Reports Server (NTRS)

    1992-01-01

    STS-47 Endeavour, Orbiter Vehicle (OV) 105, Mission Specialist (MS) N. Jan Davis, wearing a launch and entry suit (LES), looks on as technicians adjust her LES parachute pack prior to launch emergency egress (bailout) exercises in JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A. Davis is making her first flight in space.

  14. Prediction of dynamic and mixing characteristics of drop-laden mixing layers using DNS and LES

    NASA Technical Reports Server (NTRS)

    Okong'o, N.; Leboissetier, A.; Bellan, J.

    2004-01-01

    Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES) have been conducted of a temporal mixing layer laden with evaporating drops, in order to assess the ability of LES to reproduce dynamic and mixing aspects of the DNS which affect combustion, independently of combustion models.

  15. Accounting Forms. Instructor's Handbook.

    ERIC Educational Resources Information Center

    Itter, Pat

    Supporting performance objective of the 16 V-TECS (Vocational-Technical Education Consortium of States) Bookkeeper Catalog, this instructor's manual contains copies of accounting forms which can be used to make spirit masters or transparencies. (This module is the first in a set of ten on bookkeeping [CE 019 480-489].) Twenty forms grouped under…

  16. Method of forming nanodielectrics

    DOEpatents

    Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

    2014-01-07

    A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

  17. Method for forming materials

    DOEpatents

    Tolle, Charles R.; Clark, Denis E.; Smartt, Herschel B.; Miller, Karen S.

    2009-10-06

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  18. Les calculs urinaires de l'enfant au Burkina Faso: à propos de 67 cas

    PubMed Central

    Ouédraogo, Isso; Napon, Aïcha Madina; Bandré, Emile; Ouédraogo, Francis Somkieta; Tapsoba, Wendlamita Toussaint; Wandaogo, Albert

    2015-01-01

    L'objectif de cette étude est de déterminer la fréquence, de décrire les circonstances de découverte, les signes cliniques et paracliniques, la composition chimique des calculs prélevés et les difficultés rencontrées dans le traitement des lithiases urinaires. Notre étude a été rétrospective sur une période de six ans (janvier 2005 à décembre 2010) et a eu pour cadre le CHUP-CDG et a concerné 67 patients âgés de moins de 15 ans opérés pour lithiases urinaires. Les calculs de la dernière année au nombre de douze ont fait l'objet d'une analyse spectrophotométrique. La lithiase urinaire figure parmi les dix premières pathologies du service de chirurgie et représente 1,32% des hospitalisations. L’âge moyen de nos patients est de deux ans et varie de 6 mois à 14 ans. La symptomatologie de la lithiase urinaire est polymorphe. Le diagnostic des lithiases urinaires a été essentiellement radiologique (ASP) dans 87, 50 des cas. Les localisations les plus fréquentes sont: vésicales (49,25%) et pyéliques (46,26%). L'ECBU a révélé une infection urinaire chez 9 patients. Les germes le plus fréquemment rencontrés sont: Klebsiella pneumoniae pneumoniae (22,22%) et staphyloccocus aureus (22,22%). Les difficultés du traitement sont dues à la modicité de nos moyens diagnostiques et à la nature chimique des calculs et le traitement a été dans tous les cas chirurgical. La composition chimique est dominée par les sels calciques notamment les oxalates, les phosphates et les carbonates. PMID:26175840

  19. Approche en soins primaires pour les problèmes de consommation de cannabis

    PubMed Central

    Turner, Suzanne D.; Spithoff, Sheryl; Kahan, Meldon

    2014-01-01

    Résumé Objectif Étudier les caractéristiques et complications cliniques de la consommation à risque de cannabis et du trouble de consommation de cannabis, et présenter un protocole en cabinet pour le dépistage, l’identification et la prise en charge de ces problèmes. Sources des données Une recherche des essais contrôlés, des études d’observation et des révisions sur l’usage de cannabis par les adolescents et les jeunes adultes; les méfaits psychiatriques et médicaux liés au cannabis; le trouble de consommation de cannabis et son traitement; et les lignes directrices sur la consommation à faible risque de cannabis a été effectuée dans PubMed. Message principal Les médecins doivent questionner tous leurs patients quant à leur usage de cannabis. Ils doivent questionner plus souvent les adolescents et jeunes adultes de même que les personnes qui présentent un risque élevé de problèmes liés au cannabis (qui ont un trouble psychiatrique ou de consommation de drogue concomitant). Les problèmes pouvant être causés par le cannabis, comme les troubles de l’humeur, la psychose et les symptômes respiratoires, devraient susciter des questions sur la consommation de cannabis. Aux patients qui rapportent un usage de cannabis, les médecins devraient poser des questions sur la fréquence et la quantité consommée, la présence de symptômes de tolérance ou de sevrage, les tentatives de réduire leur consommation et la présence de problèmes liés au cannabis. Les usagers à faible risque fument, inhalent ou ingèrent le cannabis occasionnellement sans aucun signe de dysfonctionnement scolaire, professionnel ou social; les personnes dont l’usage est problématique consomment tous les jours ou presque tous les jours, ont de la difficulté à réduire leur consommation et leur fonctionnement scolaire, professionnel et social est perturbé. Les médecins devraient offrir à tous les patients dont l’usage est problématique des conseils

  20. LES and Hybrid LES/RANS Study of Flow and Heat Transfer around a Wall-Bounded Short Cylinder

    NASA Astrophysics Data System (ADS)

    Borello, D.; Delibra, G.; Hanjalić, K.; Rispoli, F.

    The flow in plate-fin-and-tube heat exchangers is featured by interesting dynamics of vortical structures, which, due to close proximity of bounding walls that suppress instabilities, differs significantly from the better-known patterns around long cylinders. Typically, several distinct vortex systems can be identified both in front and behind the pin. Their signature on the pin and end-walls reflects directly in the local heat transfer. The Reynolds numbers is usually moderate and the incoming flow is non-turbulent, transiting to turbulence on or just behind the first or few subsequent pin/tube rows. Upstream from the first pin a sequence of several horseshoe vortices attached to the boundingwall is created, while the unsteady wake contains also multiple vortical systems which control the entrainment of fresh fluid and its mixing with the hot fluid that was in contact with the heated surfaces [1]. The conventional CFD using standard turbulence models, as practiced by heat exchangers industries, falls short in capturing the subtle details of the complex vortex systems. A fine-grid LES can provide accurate solutions, but for more complex configurations and higher Re numbers a hybrid RANS/LES using a coarser grid seems a more rational option, provided it can capture all important flow and vortical features.

  1. Spin forming development

    SciTech Connect

    Gates, W.G.

    1982-05-01

    Bendix product applications require the capability of fabricating heavy gage, high strength materials. Five commercial sources have been identified that have the capability of spin forming metal thicknesses greater than 9.5 mm and four equiment manufacturers produce machines with this capability. Twelve assemblies selected as candidates for spin forming applications require spin forming of titanium, 250 maraging steel, 17-4 pH stainless steel, Nitronic 40 steel, 304 L stainless steel, and 6061 aluminum. Twelve parts have been cold spin formed from a 250 maraging steel 8.1 mm wall thickness machine preform, and six have been hot spin formed directly from 31.8-mm-thick flat plate. Thirty-three Ti-6Al-4V titanium alloy parts and 26 17-4 pH stainless steel parts have been hot spin formed directly from 31.8-mm-thick plate. Hot spin forming directly from plate has demonstrated the feasibility and favorable economics of this fabrication technique for Bendix applications.

  2. Les psychoses de l’épileptique: approche clinique à propos d'un cas

    PubMed Central

    Charfi, Nada; Trigui, Dorsaf; Ben Thabet, Jihène; Zouari, Nasreddine; Zouari, Lobna; Maalej, Mohamed

    2014-01-01

    Pour discuter les liens entre épilepsie et psychose, les auteurs rapportent l'observation d'une fille âgée de 22 ans, traitée pour épilepsie fronto-temporale, adressée en psychiatrie pour des hallucinations sensorielles et cénesthésiques et un délire mystique et d'influence, apparus secondairement et non améliorés par le traitement antiépileptique. Les symptômes psychotiques, chez l’épileptique, peuvent entrer dans le cadre de psychoses intercritiques, post-critiques ou alternatives. Pour le cas rapporté, les symptômes psychotiques étaient intercritiques et chroniques. Il s'agissait vraisemblablement d'une psychose schizophréniforme. Dans ce type de psychose, une indifférence affective et une restriction des activités sont rarement rencontrés, alors que les fluctuations rapides de l'humeur sont fréquentes. Les thématiques délirantes sont assez souvent mystiques, alimentées par des hallucinations auditives et par des hallucinations visuelles inhabituelles. Les troubles négatifs sont rares. Les psychoses épileptiques n'ont pas été identifiées comme des entités nosographiques dans les systèmes de classification psychiatrique (DSM-IV et CIM-10), ce qui pose un problème de reconnaissance de ces troubles. Une collaboration entre psychiatre et neurologue devient ainsi nécessaire pour mieux comprendre cette comorbidité complexe, éviter les erreurs diagnostiques et optimiser la prise en charge. PMID:25309665

  3. L'Attitude Chirurgicale dans les Brulures Electriques Graves par Haut Voltage: À Propos de Deux Cas

    PubMed Central

    Moussaoui, A.; Fejjal, N.; Achbouk, A.; Tourabi, K.; Ribag, Y.; Bakkali, H.; Ababou, K.; Ihrai, H.

    2008-01-01

    Summary Devant une brûlure électrique grave, deux attitudes chirurgicales se distinguent: 1. une attitude conservatrice; 2. une attitude d'amputation. A la lumière de deux observations, les Auteurs discutent les avantages et les difficultés de la mise en oeuvre de chaque attitude. PMID:21991118

  4. Electromagnetic nucleon form factors

    SciTech Connect

    Bender, A.; Roberts, C.D.; Frank, M.R.

    1995-08-01

    The Dyson-Schwinger equation framework is employed to obtain expressions for the electromagnetic nucleon form factor. In generalized impulse approximation the form factor depends on the dressed quark propagator, the dressed quark-photon vertex, which is crucial to ensuring current conservation, and the nucleon Faddeev amplitude. The approach manifestly incorporates the large space-like-q{sup 2} renormalization group properties of QCD and allows a realistic extrapolation to small space-like-q{sup 2}. This extrapolation allows one to relate experimental data to the form of the quark-quark interaction at small space-like-q{sup 2}, which is presently unknown. The approach provides a means of unifying, within a single framework, the treatment of the perturbative and nonperturbative regimes of QCD. The wealth of experimental nucleon form factor data, over a large range of q{sup 2}, ensures that this application will provide an excellent environment to test, improve and extend our approach.

  5. Image forming apparatus

    DOEpatents

    Satoh, Hisao; Haneda, Satoshi; Ikeda, Tadayoshi; Morita, Shizuo; Fukuchi, Masakazu

    1996-01-01

    In an image forming apparatus having a detachable process cartridge in which an image carrier on which an electrostatic latent image is formed, and a developing unit which develops the electrostatic latent image so that a toner image can be formed, both integrally formed into one unit. There is provided a developer container including a discharge section which can be inserted into a supply opening of the developing unit, and a container in which a predetermined amount of developer is contained, wherein the developer container is provided to the toner supply opening of the developing unit and the developer is supplied into the developing unit housing when a toner stirring screw of the developing unit is rotated.

  6. Handprinted Forms and Characters

    National Institute of Standards and Technology Data Gateway

    NIST Handprinted Forms and Characters (PC database for purchase)   NIST Special Database 19 contains NIST's entire corpus of training materials for handprinted document and character recognition. It supersedes NIST Special Databases 3 and 7.

  7. Échecs thérapeutiques chez les enfants infectés par le VIH en suivi de routine dans un contexte à ressources limitées au Cameroun

    PubMed Central

    Penda, Calixte Ida; Bebey, Francine Same; Mangamba, Danielle Kedy; Moukoko, Else Carole Eboumbou; Ngwa, Victoria; Makouet, Nicaise; Bissek, Anne-Cécile; Minkemdefo, Blaise Dupont; Tetanye, Ekoe; Ndombo, Paul Koki

    2013-01-01

    Introduction L'objectif de cette étude était de déterminer les facteurs associés aux échecs thérapeutiques chez les enfants infectés par le VIH à l'Hôpital Laquintinie de Douala. Méthodes Une étude transversale rétrospective a été menée sur une période de 5 mois en 2010, recrutant 222 enfants âgés de 1 à 18 ans et sous TARV depuis au moins 24 semaines. Les données sociodémographiques, cliniques, biologiques et de l'observance thérapeutique des patients ont été collectés à partir des dossiers des patients, et analysées avec le logiciel SPSS (version 16). Résultats 39 (17,6%) des enfants étaient en échec thérapeutique (délai moyen de survenue 26,8 mois) et 73,4% d'entre eux sont passés en seconde ligne. Les garçons avaient en moyenne un risque 5 fois plus élevé de faire un échec thérapeutique que les filles (OR=3,9; p=0,035). 94,4% des enfants suivis avaient un faible taux de CD4 à l'initiation (‘ 25%) associé au risque élevé d’échec thérapeutique (OR=5,2; p=0,007). Les enfants issus de famille monoparentale représentaient près de la moitié des cas d’échecs thérapeutiques. Sur 39 cas en échec thérapeutique, 41% des enfants étaient des orphelins. Parmi les enfants sous TARV, 46% prenaient leur trithérapie sous forme de médicaments séparés parmi lesquels 52,1% étaient en échec thérapeutique. Conclusion Les échecs thérapeutiques et le passage en seconde ligne dépendaient du contexte familial des enfants, de leur statut immunologique à l'initiation du traitement, de leur sexe et de la forme galénique du TARV. PMID:24171063

  8. Les déterminants du statut “perdu de vue” chez les patients pris en charge pour cancer au Maroc: situation avant le Plan Cancer

    PubMed Central

    Najdi, Adil; Berraho, Mohamed; Bendahhou, Karima; Obtel, Majdouline; Zidouh, Ahmed; Errihani, Hassan; Nejjari, Chakib

    2014-01-01

    Introduction Le cancer au Maroc représente un problème majeur de santé publique, sa prise en charge doit être globale, active et complète pour tous les patients. L'objectif de ce travail était d'estimer la fréquence des perdus de vue « PDV » en oncologie au Maroc durant la première année de suivi et de déterminer les facteurs associés à ce problème. Méthodes Par une étude rétrospective portant sur 2854 dossiers de malades hospitalisés dans les trois principaux centres d'oncologie au Maroc depuis janvier 2003 jusqu’à juin 2007 et concernant les cinq principales localisations de cancer au Maroc, nous avons cherché la date des dernières nouvelles des patients ayant un recul de 18 mois minimum afin de déterminer le statut de ces malades après un an de suivi. Résultats La moyenne d’âge était de 52±14 ans, une proportion féminine de 63%, les sujets actifs constituaient 28%, les mariés 71%, les analphabètes 51%, 70% des patients habitaient en milieu urbain et seulement 11% des malades disposaient d'une couverture sociale. La localisation cancéreuse la plus fréquente était le poumon (23,8%) suivie du colon-rectum (23,5%) puis le col (21,9%), le sein (20,4%) et les lymphomes (10,4%). Le taux des «PDV» à un an de suivi était de 48%, ce statut était significativement lié au sexe, à l’âge, au NSE et au statut matrimonial. Sur le plan médical, le statut «PDV» était lié à la localisation du cancer, au stade de diagnostic et au type de traitement reçu. Conclusion Notre étude a mis en évidence la grande ampleur du problème des PDV en cancérologie au Maroc ainsi que ces déterminants. Ces résultats incitent tous les acteurs dans le domaine de la cancérologie à collaborer ensemble pour prendre les mesures qui s'imposent pour y pallier PMID:25400850

  9. Commerce de detail de l'essence automobile: Modelisation de l'impact a court terme des facteurs endogenes et exogenes sur les ventes d'essence dans les stations-service a Montreal

    NASA Astrophysics Data System (ADS)

    Nguimbus, Raphael

    La determination de l'impact des facteurs sous controle et hors controle qui influencent les volumes de vente des magasins de detail qui vendent des produits homogenes et fortement substituables constitue le coeur de cette these. Il s'agit d'estimer un ensemble de coefficients stables et asymtotiquement efficaces non correles avec les effets specifiques aleatoires des sites d'essence dans le marche de Montreal (Quebec, Canada) durant is periode 1993--1997. Le modele econometrique qui est ainsi specifie et teste, isole un ensemble de quatre variables dont le prix de detail affiche dans un site d'essence ordinaire, la capacite de service du site pendant les heures de pointe, les heures de service et le nombre de sites concurrents au voisinage du site dans un rayon de deux kilometres. Ces quatre facteurs influencent les ventes d'essence dans les stations-service. Les donnees en panel avec les methodes d'estimation robustes (estimateur a distance minimale) sont utilisees pour estimer les parametres du modele de vente. Nous partons avec l'hypothese generale selon laquelle il se developpe une force d'attraction qui attire les clients automobilistes dans chaque site, et qui lui permet de realiser les ventes. Cette capacite d'attraction varie d'un site a un autre et cela est du a la combinaison de l'effort marketing et de l'environnement concurrentiel autour du site. Les notions de voisinage et de concurrence spatiale expliquent les comportements des decideurs qui gerent les sites. Le but de cette these est de developper un outil d'aide a la decision (modele analytique) pour permettre aux gestionnaires des chaines de stations-service d'affecter efficacement les ressources commerciales dans ies points de vente.

  10. Shell forming system

    NASA Technical Reports Server (NTRS)

    Kendall, Jr., James M. (Inventor); Wang, Taylor G. (Inventor); Elleman, Daniel D. (Inventor)

    1990-01-01

    Hollow shells of high uniformity are formed by emitting liquid through an outer nozzle and gas through an inner nozzle, to form a hollow extrusion, by flowing the gas at a velocity between about 1.3 and 10 times the liquid velocity. The natural breakup rate of the extrusion can be increased to decrease shell size by applying periodic perturbations to one of the materials prior to exiting the nozzles, to a nozzle, or to the extrusion.

  11. Composite hot drape forming

    NASA Astrophysics Data System (ADS)

    Ott, Thomas

    1994-02-01

    This program was initiated to replace labor-intensive ply-by-ply layup of composite I-beam posts and angle stiffeners used in the Space Station Freedom (SSF) rack structure. Hot drape forming (HDF) has been successfully implemented by BCAG for 777 composite I-stringers and by Bell Helicopter/Textron for the V-22 I-stingers. The two companies utilize two vastly different approaches to the I-beam fabrication process. A drape down process is used by Bell Helicopter where the compacted ply charge is placed on top of a forming mandrel and heated. When the heated ply charge reached a set temperature, vacuum pressure is applied and the plies are formed over the mandrel. The BCAG 777 process utilizes an inverted forming process where the ply stack is placed on a forming table and the mandrel is inverted and placed upon the ply stack. A heating and vacuum bladder underneath the ply stack form the play stack up onto the mandrels after reaching the temperature setpoint. Both methods have their advantages, but the drape down process was selected for SSF because it was more versatile and could be fabricated from readily available components.

  12. Composite hot drape forming

    NASA Technical Reports Server (NTRS)

    Ott, Thomas

    1994-01-01

    This program was initiated to replace labor-intensive ply-by-ply layup of composite I-beam posts and angle stiffeners used in the Space Station Freedom (SSF) rack structure. Hot drape forming (HDF) has been successfully implemented by BCAG for 777 composite I-stringers and by Bell Helicopter/Textron for the V-22 I-stingers. The two companies utilize two vastly different approaches to the I-beam fabrication process. A drape down process is used by Bell Helicopter where the compacted ply charge is placed on top of a forming mandrel and heated. When the heated ply charge reached a set temperature, vacuum pressure is applied and the plies are formed over the mandrel. The BCAG 777 process utilizes an inverted forming process where the ply stack is placed on a forming table and the mandrel is inverted and placed upon the ply stack. A heating and vacuum bladder underneath the ply stack form the play stack up onto the mandrels after reaching the temperature setpoint. Both methods have their advantages, but the drape down process was selected for SSF because it was more versatile and could be fabricated from readily available components.

  13. Comparing UCLALES-SALSA and WRF-Chem LES

    NASA Astrophysics Data System (ADS)

    Tonttila, Juha; Dunne, Eimear; Ahola, Jaakko; Korhonen, Hannele; Kokkola, Harri; Romakkaniemi, Sami

    2016-04-01

    The new UCLALES-SALSA model, which uses a sectional representation of aerosols and cloud droplets, is compared against the LES configuration of the established WRF-Chem model. Two configurations of WRF-Chem are compared: the first using the sectional MOSAIC aerosol representation, and the second using the modal MADE/SORGAM representation. Both sets of WRF-Chem simulations use the two-moment Morrisson bulk cloud scheme. Wherever possible, the three sets of simulations have identical processes and initial conditions. By comparing UCLALES-SALSA against an established model in an ideal scenario, we demonstrate that the new model provides a realistic representation of warm cloud processes. The two configurations of WRF-Chem make it possible (to an extent) to isolate whether differences in model outputs are due to meteorological or microphysical effects.

  14. A Hybrid RANS/LES Approach for Predicting Jet Noise

    NASA Technical Reports Server (NTRS)

    Goldstein, Marvin E.

    2006-01-01

    Hybrid acoustic prediction methods have an important advantage over the current Reynolds averaged Navier-Stokes (RANS) based methods in that they only involve modeling of the relatively universal subscale motion and not the configuration dependent larger scale turbulence. Unfortunately, they are unable to account for the high frequency sound generated by the turbulence in the initial mixing layers. This paper introduces an alternative approach that directly calculates the sound from a hybrid RANS/LES flow model (which can resolve the steep gradients in the initial mixing layers near the nozzle lip) and adopts modeling techniques similar to those used in current RANS based noise prediction methods to determine the unknown sources in the equations for the remaining unresolved components of the sound field. The resulting prediction method would then be intermediate between the current noise prediction codes and previously proposed hybrid noise prediction methods.

  15. Etude des effets du martelage repetitif sur les contraintes residuelles

    NASA Astrophysics Data System (ADS)

    Hacini, Lyes

    L'assemblage par soudage peut engendrer des contraintes residuelles. Ces contraintes provoquent des fissurations prematurees et un raccourcissement de la duree de vie des composants. Dans ce contexte, le martelage robotise est utilise pour relaxer ces contraintes residuelles. Trois volets sont presentes: le premier est l'evaluation des effets des impacts unitaires repetes sur le champ de contraintes developpe dans des plaques d'acier inoxydable austenitique 304L vierges ou contenant des contraintes residuelles initiales. Dans la deuxieme partie de ce projet, le martelage est applique grace au robot SCOMPI. Les contraintes residuelles induites et relaxees par martelage sont ensuite mesurees par la methode des contours, qui a ete adaptee a cet effet. Dans la troisieme partie, le martelage est modelise par la methode des elements finis. Un modele axisymetrique developpe grace au logiciel ANSYS permet de simuler des impacts repetes d'un marteau elastique sur une plaque ayant un comportement elastoplastique.

  16. Laser forming process development

    SciTech Connect

    Blake, R.J.

    1996-12-31

    This paper is a summary of the activities performed for the process development of laser thermal forming sheet metal parts in support of rapid prototyping. A 400 watt pulsed Nd:YAG laser and 50 watt desktop CO{sub 2} laser were used during initial process development. Several tool-assisted laser forming approaches were conceived during the development of the process, and simple fixtures for process development/understanding were used throughout all testing. Much of the actual forming was performed with the base material in an unfixtured state. CRES (304) was used for baseline development, but the effort was directed toward forming titanium (e.g., 6Al-4V, 15V-3Cr-3Sn-3Al). Several DOE (i.e., Design of Experiment) techniques were employed during development and a Neural Net Computer Model was conceived for process control. This program was a joint effort in cooperation with the American Welding Society under contract with the Defense Advanced Research Projects Agency (DARPA). A synopsis of the laser forming process development, future opportunities, and applications are presented.

  17. Les perdus de vue en radiothérapie: expérience de l'Institut National d'Oncologie au Maroc

    PubMed Central

    Mezouri, Imane; Chenna, Hanane; Bellefqih, Sara; Elkacemi, Hanan; Kebdani, Tayeb; Benjaafar, Noureddine

    2014-01-01

    Les perdus de vue (PDV) sont toute personne incluse dans un programme et dont on est sans nouvelles depuis six mois. L'objectif de cette étude est de fournir une description objective du problème des malades PDV au service de radiothérapie à l'Institut National d'Oncologie (INO), elle permet d’étudier l'impact des facteurs socio-économiques, démographiques et ceux liés à la maladie entraînant l'abandon du traitement par le patient. Nous avons réalisé une étude rétrospective de 77 patients PDV parmi 2254 patient admis à l'INO du premier janvier au 31 décembre 2011 pour traitement par radiothérapie. La présente analyse a mis en évidence que les taux d'abandon sont associés à des facteurs liés à la maladie et qu’à la fois le patient et le médecin doivent être formés et être conscients de la façon dont les stades avancés de la maladie, le mauvais statut de performance ainsi que la combinaison des autres problèmes de santé peuvent suffisamment conduire le patient à l'abandon du traitement. PMID:25584129

  18. Methods for forming particles

    DOEpatents

    Fox, Robert V.; Zhang, Fengyan; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin

    2016-06-21

    Single source precursors or pre-copolymers of single source precursors are subjected to microwave radiation to form particles of a I-III-VI.sub.2 material. Such particles may be formed in a wurtzite phase and may be converted to a chalcopyrite phase by, for example, exposure to heat. The particles in the wurtzite phase may have a substantially hexagonal shape that enables stacking into ordered layers. The particles in the wurtzite phase may be mixed with particles in the chalcopyrite phase (i.e., chalcopyrite nanoparticles) that may fill voids within the ordered layers of the particles in the wurtzite phase thus produce films with good coverage. In some embodiments, the methods are used to form layers of semiconductor materials comprising a I-III-VI.sub.2 material. Devices such as, for example, thin-film solar cells may be fabricated using such methods.

  19. Enhanced capacitative calcium entry and TRPC channel gene expression in human LES smooth muscle.

    PubMed

    Wang, Jian; Laurier, Lisanne G; Sims, Stephen M; Preiksaitis, Harold G

    2003-06-01

    Transient receptor potential channel (TRPC) genes encode Ca(2+)-permeable channels mediating capacitative Ca(2+) entry (CCE), which maintains intracellular Ca(2+) stores. We compared TRPC gene expression and CCE in human esophageal body (EB) and lower esophageal sphincter (LES), because these smooth muscles have distinct contractile functions that are likely associated with different Ca(2+) regulatory mechanisms. Circular layer smooth muscle cells were grown in primary culture. Transcriptional expression of TRPC genes was compared by semiquantitative RT-PCR. CCE was measured by fura 2 Ca(2+) fluorescence after blockade of sarcoplasmic reticulum Ca(2+)-ATPase with thapsigargin. mRNA for TRPC1, TRPC3, TRPC4, TRPC5, and TRPC6 was identified in EB and LES. TRPC3 and TRPC4 were more abundant in LES than EB. Basal concentration of free intracellular Ca(2+) ([Ca(2+)](i)) was similar in cells from LES (138 +/- 8 nmol/l) and EB (110 +/- 6 nmol/l) and increased with ACh (10 micromol/l; 650 +/- 28 and 590 +/- 21 nmol/l, respectively). With zero Ca(2+) in bath, thapsigargin (2 micromol/l) increased [Ca(2+)](i) more in LES (550 +/- 22 nmol/l) than EB (250 +/- 15 nmol/l, P < 0.001). Subsequent external application of 1 mmol/l Ca(2+) increased [Ca(2+)](i) more in LES (585 +/- 35 nmol/l) than EB (295 +/- 21 nmol/l, P < 0.001), indicating enhanced CCE in LES. This demonstrates CCE and TRPC transcriptional expression in human esophageal smooth muscle. In LES cells, enhanced CCE and expression of TRPC3 and TRPC4 may contribute to the physiological characteristics that distinguish LES from EB. PMID:12736151

  20. Les corps étrangers en ORL: expérience de dix ans

    PubMed Central

    Hssaine, Khaoula; Belhoucha, Btissam; Rochdi, Youssef; Nouri, Hassan; Aderdour, Lahcen; Raji, Abdelaziz

    2015-01-01

    Les corps étrangers (CE) représentent une pathologie fréquemment rencontrée en pratique ORL d'urgence. Ils peuvent constituer une urgence vitale par leur aspect ou leur siège. Nous présentons le bilan de dix ans sur la prise en charge des CE de la sphère ORL avec une revue de la littérature. Il s'agit d'une étude rétrospective entre Janvier 2004 et Décembre 2013, incluant tous les cas de CE des voies aéro-digestives supérieures et auriculaires colligés dans le service d'ORL au CHU Mohammed VI de Marrakech au Maroc. Sur les 1317 cas de CE de la sphère ORL colligés durant cette période, 80,48% concernaient les enfants. Le sex-ratio était de 1,5. L’âge moyen était de 12,92 ans. Les CE œsophagiens étaient les plus fréquents (47,53%). Les complications ont été rencontrées dans 11,69% des cas. Les CE dans la sphère ORL restent fréquents en pratique quotidienne surtout chez les enfants. Leur prise en charge nécessite une intervention rapide avec un matériel adapté et des médecins entrainés. La prévention reste la meilleure solution. PMID:26516392

  1. Des recommandations probantes pour surveiller l’innocuité des antipsychotiques de deuxième génération chez les enfants et les adolescents

    PubMed Central

    Pringsheim, Tamara; Panagiotopoulos, Constadina; Davidson, Jana; Ho, Josephine

    2012-01-01

    HISTORIQUE : Au Canada, l’utilisation d’antipsychotiques, notamment les antipsychotiques de deuxième génération (ADG), a augmenté de façon considérable depuis cinq ans chez les enfants ayant des troubles de santé mentale. Ces médicaments ont le potentiel de causer de graves complications métaboliques et neurologiques lorsqu’on les utilise de manière chronique. OBJECTIF : Synthétiser les données probantes relatives aux effets secondaires métaboliques et neurologiques précis associés à l’usage d’ADG chez les enfants et fournir des recommandations probantes sur la surveillance de ces effets secondaires. MÉTHODOLOGIE : Les auteurs ont procédé à une analyse systématique des essais cliniques contrôlés des ADG auprès d’enfants. Ils ont fait des recommandations à l’égard de la surveillance de l’innocuité des ADG d’après un modèle de classification fondé sur le système GRADE (système de notation de l’évaluation et de l’élaboration des recommandations). Lorsque les données probantes n’étaient pas suffisantes, ils fondaient leurs recommandations sur le consensus et l’avis d’experts. Un groupe consensuel multidisciplinaire a analysé toutes les données probantes pertinentes et est parvenu à un consensus à l’égard des recommandations. RÉSULTATS : Les recommandations probantes portant sur la surveillance de l’innocuité des ADG figurent dans les présentes lignes directrices. Les auteurs indiquent la qualité des recommandations relatives à des examens physiques et tests de laboratoire précis à l’égard de chaque ADG à des moments déterminés. CONCLUSION : De multiples essais aléatoires et contrôlés ont permis d’évaluer l’efficacité de bon nombre des ADG utilisés pour traiter les troubles de santé mentale en pédiatrie. Toutefois, leurs avantages ne sont pas sans risques : on observe à la fois des effets secondaires métaboliques et neurologiques chez les enfants traités au moyen d

  2. LES-based evaluation of a microjet noise reduction concept in static and flight conditions

    NASA Astrophysics Data System (ADS)

    Shur, Mikhail L.; Spalart, Philippe R.; Strelets, Mikhail Kh.

    2011-08-01

    The Large-Eddy Simulation (LES) numerical system established since 2002 for jet-noise computation is first evaluated in terms of recent gains in accuracy with increased computer resources, and is then used to explore the relatively new "microjet" noise-reduction concept (injection of high-pressure microjets in the vicinity of the main jet nozzle exit), which currently attracts attention in the aeroacoustic community. The simulations, which are carried out with an emulation of the microjets by specially designed distributed sources of mass, momentum, and energy in the governing equations, are found to capture the essential features of the flow/turbulence and the far-field noise alteration by the microjets observed in experiments, and to reveal the subtle flow features responsible for the effect of injection on noise. They also confirm the experimental observation that in static conditions microjets provide a noise reduction comparable with that from chevrons in the low-frequency range, and probably have a less pronounced high-frequency penalty. This positive evaluation of the microjets concept is, however, mitigated by the far less favorable results of simulations in flight conditions, which were never studied experimentally. The latter results, which are awaiting an experimental verification, make a practical use of the concept in its current form rather unlikely.

  3. The dynamics of vortex shedding of flow past a vertical flat plate; LES studies

    NASA Astrophysics Data System (ADS)

    Velez, Carlos; Ilie, Marcel

    2010-11-01

    Although, apparently flow-induced vibrations represent a canonical problem, a complete understanding of the fluid-structure mechanism of interaction has not yet been achieved. One of the issues associated with flow induced vibrations stems from the vortex shedding phenomenon. It is well known that vortex streets are formed in the wake of bluff bodies over a wide range of Reynolds numbers. The periodic shedding of vortices may result in significant fluctuating loading on the body. When the shedding frequency is close to one of the characteristic frequencies of the body, the resonant oscillations of the body can be excited, causing damaging instabilities. Various studies regarding the vortex shedding resonance or "lock-on" phenomenon have been conducted. However, the effect of Reynolds number on the "lock-on" regime is yet to be fully understood. The "lock-on" phenomenon is of critical importance for the analysis of flow-induced vibration, when the aeroelastic response of the structure is considered. In the present research the influence of sweeping angle on the plate tip vortex formation is studied numerically using large eddy simulation (LES). The results show an increase in magnitude and size of vertical structures developed in the wake of the plate.

  4. LES of a Jet Excited by the Localized Arc Filament Plasma Actuators

    NASA Technical Reports Server (NTRS)

    Brown, Clifford A.

    2011-01-01

    The fluid dynamics of a high-speed jet are governed by the instability waves that form in the free-shear boundary layer of the jet. Jet excitation manipulates the growth and saturation of particular instability waves to control the unsteady flow structures that characterize the energy cascade in the jet.The results may include jet noise mitigation or a reduction in the infrared signature of the jet. The Localized Arc Filament Plasma Actuators (LAFPA) have demonstrated the ability to excite a high-speed jets in laboratory experiments. Extending and optimizing this excitation technology, however, is a complex process that will require many tests and trials. Computational simulations can play an important role in understanding and optimizing this actuator technology for real-world applications. Previous research has focused on developing a suitable actuator model and coupling it with the appropriate computational fluid dynamics (CFD) methods using two-dimensional spatial flow approximations. This work is now extended to three-dimensions (3-D) in space. The actuator model is adapted to a series of discrete actuators and a 3-D LES simulation of an excited jet is run. The results are used to study the fluid dynamics near the actuator and in the jet plume.

  5. Assessment of stretched vortex subgrid-scale models for LES of incompressible inhomogeneous turbulent flow.

    PubMed

    Shetty, Dinesh A; Frankel, Steven H

    2013-09-20

    The physical space version of the stretched vortex subgrid scale model [Phys. Fluids 12, 1810 (2000)] is tested in large eddy simulations (LES) of the turbulent lid driven cubic cavity flow. LES is carried out using a higher order finite-difference method [J. Comput. Phys. 229, 8802 (2010)]. The effects of different vortex orientation models and subgrid turbulence spectrums are assessed through comparisons of the LES predictions against direct numerical simulations (DNS) [Phys. Fluids 12, 1363 (2000)]. Three Reynolds numbers 12000, 18000, and 22000 are studied. Good agreement with the DNS data for the mean and fluctuating quantities is observed. PMID:24187423

  6. Les valvulopathies cardiaques en milieu hospitalier à Lomé (Togo)

    PubMed Central

    Balaka, Abago; Tchamdja, Toyi; Djibril, Mohaman Awalou; Djagadou, Kodjo Agbéko; Tchandana, Makilioubè; Damorou, Findibé; Agbétra, Aïssah

    2015-01-01

    Introduction Notre étude a consisté en l'identification les principales valvulopathies retrouvées en milieu hospitalier à Lomé (Togo). Méthodes Il s'agit d'une étude rétrospective, transversale, multicentrique menée du 1er janvier 2006 au 31 décembre 2010 et portant sur les dossiers de patients suivis dans le service de cardiologie du CHU Campus de Lomé. Résultats Du 1er janvier 2006 au 31 Décembre 2010,5412 patients ont été consulté dans le service de cardiologie du CHU Campus. Parmi eux, 241 (4,45%) présentaient une valvulopathie. On notait une prédominance féminine avec un sex-ratio H/F à 0,60. La moyenne d’âge était de 62,32 ans avec des extrêmes allant de 16 à 89 ans et un écart type de 14,27. Les antécédents le plus souvent retrouvés étaient l'hypertension artérielle (26,97%) et le diabète (8,29%). Parmi les motifs de consultations, les plus fréquents étaient la dyspnée (39,00%), les précordialgies (32,78%) et les palpitations (21,16%). A l'examen physique 30,70% des patients présentaient des signes de d'insuffisance cardiaque. A l’échographie, on notait des atteintes d'une seule valve (77,17%), de 02 valves (17,42%) ou 03 valves (5,4%). L'insuffisance mitrale (56,84%) et l'insuffisance aortique (30,70%) ont été les valvulopathies les plus fréquemment retrouvées. La maladie mitrale a été notée chez 05 patients. Les principales étiologies étaient dégénératives et ischémiques. Conclusion Les valvulopathies sont relativement fréquentes à Lomé. L'insuffisance cardiaque est leur principal mode de révélation. Les plus retrouvées sont l'insuffisance mitrale et aortique. PMID:26113911

  7. Model-Invariant Hybrid LES-RANS Computation of Separated Flow Past Periodic Hills

    NASA Technical Reports Server (NTRS)

    Woodruff, Stephen

    2014-01-01

    The requirement that physical quantities not vary with a hybrid LESRANS model's blending parameter imposes conditions on the computation that lead to better results across LES-RANS transitions. This promises to allow placement of those transitions so that LES is performed only where required by the physics, improving computational efficiency. The approach is applied to separated flow past periodic hills, where good predictions of separation-bubble size are seen due to the gradual, controlled, LES-RANS transition and the resulting enhanced near-wall eddy viscosity.

  8. Evaluation des complications cardiaques chez les hémodialysés chroniques de Dakar

    PubMed Central

    Moustapha, Cissé Mouhamadou; Tall, Lemrabott Ahmed; Maria, Faye; Khodia, Fall; Moustapha, Faye; Fary, Ka El Hadji; Abdou, Niang; Boucar, Diouf

    2016-01-01

    Introduction L’évaluation cardiovasculaire est essentielle en hémodialyse périodique car les affections cardiovasculaires sont la première cause de mortalité chez les hémodialysés chroniques. Nous avons conduit cette étude afin de déterminer la prévalence et le type des différentes complications cardiovasculaires et d'identifier les principaux facteurs de risque cardiovasculaire. Méthodes Il s'agissait d'une étude rétrospective de 4 ans portant sur les dossiers de patients traités au moins 6 mois en hémodialyse et ayant des explorations cardio-vasculaires comportant une radiographie du thorax de face, un électrocardiogramme et une échographie cardiaque. Les données épidémiologiques, cliniques, paracliniques, les aspects évolutifs des complications cardiaques ont été recueillies pour chaque patient retenu. Résultats Trente huit dossiers de patients ont été inclus dans cette étude. L’âge moyen était de 52 ans ± 12,85 et le sex-ratio H/F de 1,53. Les complications cardiovasculaires étaient dominées par l'hypertrophie ventriculaire gauche (71,05%), la maladie coronaire (34,21%), l'insuffisance cardiaque congestive (18,42%), Calcifications vasculaires (5,78%), les troubles du rythme (7.89%), les fuites valvulaires mitrales (44,73%), tricuspidiennes (42,10%) et les accidents vasculaires cérébraux hémorragiques (5,26%). L'incidence moyenne de l'HVG était de 81% chez les patients hypertendus. Au cours de cette étude, 27 patients avaient poursuivi l'hémodialyse et 11 étaient décédés dont 6 de causes cardiovasculaires (54,55%). Conclusion L'hémodialyse est une technique d’épuration qui expose les patients à de multiples complications cardiovasculaires. PMID:27217869

  9. Literature: Internal Forms.

    ERIC Educational Resources Information Center

    Regional Curriculum Project, Atlanta, GA.

    This curriculum guide in literature, developed as part of a total English curriculum for pre-kindergarten through grade 10, suggests that students can best understand literature by recognizing its internal forms (i.e., characteristics that recur in settings, characters, and narrative patterns). Materials cover (1) an overview for teachers on the…

  10. Apparatus for forming targets

    DOEpatents

    Woerner, Robert L.

    1980-01-01

    Apparatus and method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

  11. Method for forming targets

    DOEpatents

    Woerner, Robert L.

    1979-01-01

    Method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

  12. Literature: External Forms.

    ERIC Educational Resources Information Center

    Regional Curriculum Project, Atlanta, GA.

    This curriculum guide, developed as part of a total English curriculum for pre-kindergarten through grade 10, suggests that students can best understand literature by understanding its recurring external forms or genres, and includes (1) an overview describing the four literary genres of drama, narrative poetry, narrative fiction, and lyric poetry…

  13. High energy forming facility

    NASA Technical Reports Server (NTRS)

    Ciurlionis, B.

    1967-01-01

    Watertight, high-explosive forming facility, 25 feet in diameter and 15 feet deep, withstands repeated explosions of 10 pounds of TNT equivalent. The shell is fabricated of high strength steel and allows various structural elements to deform or move elastically and independently while retaining structural integrity.

  14. Geodiversity and land form

    NASA Astrophysics Data System (ADS)

    Gray, Murray

    2014-05-01

    The Earth's surface has a dynamic and topographically varied natural landscape. In some cases the resulting landforms are given generic names reflecting their form and/or origin, (e.g. sand dunes, eskers, ox-bow lakes) but in many cases the land surface has a more amorphous form and is less easily categorized other than at a landscape scale (e.g. dissected plateau, Chalk downland). Across much of Europe, while the natural vegetation has been removed or radically modified, the natural land form/topography remains in tact. In this context and in terms of geoconservation we ought to be: • allowing the dynamic natural processes that create, carve and modify landscapes to continue to operate; and • retaining natural topographic character and geomorphological authenticity in the face of human actions seeking to remodel the land surface. In this presentation examples of this approach to geoconservation of land form will be given from the UK and other parts of the world. This will include examples of both appropriate and inappropriate topographic modifications.

  15. Many Forms of Culture

    ERIC Educational Resources Information Center

    Cohen, Adam B.

    2009-01-01

    Psychologists interested in culture have focused primarily on East-West differences in individualism-collectivism, or independent-interdependent self-construal. As important as this dimension is, there are many other forms of culture with many dimensions of cultural variability. Selecting from among the many understudied cultures in psychology,…

  16. Formed photovoltaic module busbars

    DOEpatents

    Rose, Douglas; Daroczi, Shan; Phu, Thomas

    2015-11-10

    A cell connection piece for a photovoltaic module is disclosed herein. The cell connection piece includes an interconnect bus, a plurality of bus tabs unitarily formed with the interconnect bus, and a terminal bus coupled with the interconnect bus. The plurality of bus tabs extend from the interconnect bus. The terminal bus includes a non-linear portion.

  17. Inelastic Scattering Form Factors

    Energy Science and Technology Software Center (ESTSC)

    1992-01-01

    ATHENA-IV computes form factors for inelastic scattering calculations, using single-particle wave functions that are eigenstates of motion in either a Woods-Saxon potential well or a harmonic oscillator well. Two-body forces of Gauss, Coulomb, Yukawa, and a sum of cut-off Yukawa radial dependences are available.

  18. Forms of Soft Sculpture

    ERIC Educational Resources Information Center

    Tucker, Dorothy

    1978-01-01

    For the past several years, students at Madison Senior High School in San Diego have responded to the tactile texture and draping quality of soft materials. They experimented enthusiastically with three-dimensional forms made out of foam rubber. Here is the result of their efforts and experimentation. (Author/RK)

  19. Changing Organizational Forms.

    ERIC Educational Resources Information Center

    1997

    This document contains three papers from a symposium on changing organizational forms. "Goal Integration in a Multi-divisional Organization" (Richard J. Torraco, Mary Finnegan), reports on a study that examined how goals are integrated into organizational activities once they have been identified, proposes a model of goal integration, and develops…

  20. L’administration postnatale de corticoïdes pour traiter ou prévenir les affections pulmonaires chroniques chez les prématurés

    PubMed Central

    2002-01-01

    Le présent énoncé est conçu à l’intention des professionnels de la santé qui soignent des nouveau-nés et de jeunes nourrissons. Il vise à examiner les effets à court et à long terme de l’administration postnatale de corticoïdes systémiques et par inhalation pour prévenir ou traiter une affection pulmonaire chronique évolutive ou établie et à faire des recommandations quant à l’usage de corticoïdes chez les nourrissons à très faible poids de naissance. Le recours systématique à la dexaméthasone systémique pour prévenir ou traiter une affection pulmonaire chronique n’est pas recommandé chez les nourrissons à très faible poids de naissance.

  1. Waste-form development

    SciTech Connect

    Neilson, R.M. Jr.; Colombo, P.

    1982-01-01

    Contemporary solidification agents are being investigated relative to their applications to major fuel cycle and non-fuel cycle low-level waste (LLW) streams. Work is being conducted to determine the range of conditions under which these solidification agents can be applied to specific LLW streams. These studies are directed primarily towards defining operating parameters for both improved solidification of problem wastes and solidification of new LLW streams generated from advanced volume reduction technologies. Work is being conducted to measure relevant waste form properties. These data will be compiled and evaluated to demonstrate compliance with waste form performance and shallow land burial acceptance criteria and transportation requirements (both as they exist and as they are modified with time).

  2. Formed HIP Can Processing

    SciTech Connect

    Clarke, Kester Diederik

    2015-07-27

    The intent of this report is to document a procedure used at LANL for HIP bonding aluminum cladding to U-10Mo fuel foils using a formed HIP can for the Domestic Reactor Conversion program in the NNSA Office of Material, Management and Minimization, and provide some details that may not have been published elsewhere. The HIP process is based on the procedures that have been used to develop the formed HIP can process, including the baseline process developed at Idaho National Laboratory (INL). The HIP bonding cladding process development is summarized in the listed references. Further iterations with Babcock & Wilcox (B&W) to refine the process to meet production and facility requirements is expected.

  3. Improved engine wall models for Large Eddy Simulation (LES)

    NASA Astrophysics Data System (ADS)

    Plengsaard, Chalearmpol

    Improved wall models for Large Eddy Simulation (LES) are presented in this research. The classical Werner-Wengle (WW) wall shear stress model is used along with near-wall sub-grid scale viscosity. A sub-grid scale turbulent kinetic energy is employed in a model for the eddy viscosity. To gain better heat flux results, a modified classical variable-density wall heat transfer model is also used. Because no experimental wall shear stress results are available in engines, the fully turbulent developed flow in a square duct is chosen to validate the new wall models. The model constants in the new wall models are set to 0.01 and 0.8, respectively and are kept constant throughout the investigation. The resulting time- and spatially-averaged velocity and temperature wall functions from the new wall models match well with the law-of-the-wall experimental data at Re = 50,000. In order to study the effect of hot air impinging walls, jet impingement on a flat plate is also tested with the new wall models. The jet Reynolds number is equal to 21,000 and a fixed jet-to-plate spacing of H/D = 2.0. As predicted by the new wall models, the time-averaged skin friction coefficient agrees well with experimental data, while the computed Nusselt number agrees fairly well when r/D > 2.0. Additionally, the model is validated using experimental data from a Caterpillar engine operated with conventional diesel combustion. Sixteen different operating engine conditions are simulated. The majority of the predicted heat flux results from each thermocouple location follow similar trends when compared with experimental data. The magnitude of peak heat fluxes as predicted by the new wall models is in the range of typical measured values in diesel combustion, while most heat flux results from previous LES wall models are over-predicted. The new wall models generate more accurate predictions and agree better with experimental data.

  4. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    SciTech Connect

    Steven Cannon; Virgil Adumitroaie; Keith McDaniel; Clifford Smith

    2002-07-01

    Further development of a combustion Large Eddy Simulation (LES) code for the design of advanced gaseous combustion systems is described in this seventh quarterly report. CFD Research Corporation is developing the LES module within the parallel, unstructured solver included in the commercial CFD-ACE+ software. In this quarter, the Localized Dynamic subgrid Kinetic energy Model (LDKM) was improved and an initial Turbulent Artificial Neural Net (TANN) was developed. Validation and testing of the combustion LES code was performed for the Vanderbilt lean premixed combustor and the Loughborough University combustor port flow experiment. Next quarter, LES software development and testing will continue. Alpha testing of the code will continue to be performed on cases of interest to the industrial consortium. Optimization of the subgrid models will be pursued, particularly with the In Situ Adaptive Tabulation (ISAT) approach. Also next quarter, the demonstration of the TANN approach in CFD-ACE+ will be accomplished.

  5. Development of a Hybrid RANS/LES Method for Compressible Mixing Layer Simulations

    NASA Technical Reports Server (NTRS)

    Georgiadis, Nicholas J.; Alexander, J. Iwan D.; Reshotko, Eli

    2001-01-01

    A hybrid method has been developed for simulations of compressible turbulent mixing layers. Such mixing layers dominate the flows in exhaust systems of modem day aircraft and also those of hypersonic vehicles currently under development. The hybrid method uses a Reynolds-averaged Navier-Stokes (RANS) procedure to calculate wall bounded regions entering a mixing section, and a Large Eddy Simulation (LES) procedure to calculate the mixing dominated regions. A numerical technique was developed to enable the use of the hybrid RANS/LES method on stretched, non-Cartesian grids. The hybrid RANS/LES method is applied to a benchmark compressible mixing layer experiment. Preliminary two-dimensional calculations are used to investigate the effects of axial grid density and boundary conditions. Actual LES calculations, performed in three spatial directions, indicated an initial vortex shedding followed by rapid transition to turbulence, which is in agreement with experimental observations.

  6. A la recherches d'autres mondes - les exoplanètes

    NASA Astrophysics Data System (ADS)

    Nazé, Yaël

    2013-10-01

    Habiter ailleurs que sur Terre, en dehors du système solaire, est-ce vraiment possible ? Est-ce que la vie existe en dehors du Système solaire et comment la chercher ? Ces questions sont celles que les hommes et les femmes se posent et celles qu'ils se sont posées de tout temps. Les scientifiques n'échappent pas à cette règle et nous vivons à une époque fascinante où cette recherche évolue extrêmement vite : ils ont découvert d'autres lieux potentiellement habitables ou habités, les exoplanètes, des planètes tournant autour d'autres soleils dans l'univers. À ce jour, plus de 900 exoplanètes ont ainsi été détectées

  7. STS-26 Pilot Richard O. Covey adjusts LES neck dam during preflight suiting

    NASA Technical Reports Server (NTRS)

    1988-01-01

    STS-26 Discovery, Orbiter Vehicle (OV) 103, Pilot Richard O. Covey adjusts launch and entry suit (LES) neck dam during preflight suiting activities in the Operations and Checkout (O and C) Building at the Kennedy Space Center (KSC).

  8. Nucleon Electromagnetic Form Factors

    SciTech Connect

    Kees de Jager

    2004-08-01

    Although nucleons account for nearly all the visible mass in the universe, they have a complicated structure that is still incompletely understood. The first indication that nucleons have an internal structure, was the measurement of the proton magnetic moment by Frisch and Stern (1933) which revealed a large deviation from the value expected for a point-like Dirac particle. The investigation of the spatial structure of the nucleon, resulting in the first quantitative measurement of the proton charge radius, was initiated by the HEPL (Stanford) experiments in the 1950s, for which Hofstadter was awarded the 1961 Nobel prize. The first indication of a non-zero neutron charge distribution was obtained by scattering thermal neutrons off atomic electrons. The recent revival of its experimental study through the operational implementation of novel instrumentation has instigated a strong theoretical interest. Nucleon electro-magnetic form factors (EMFFs) are optimally studied through the exchange of a virtual photon, in elastic electron-nucleon scattering. The momentum transferred to the nucleon by the virtual photon can be selected to probe different scales of the nucleon, from integral properties such as the charge radius to scaling properties of its internal constituents. Polarization instrumentation, polarized beams and targets, and the measurement of the polarization of the recoiling nucleon have been essential in the accurate separation of the charge and magnetic form factors and in studies of the elusive neutron charge form factor.

  9. Electromagnetic pion form factor

    SciTech Connect

    Roberts, C.D.

    1995-08-01

    A phenomenological Dyson-Schwinger/Bethe-Salpeter equation approach to QCD, formalized in terms of a QCD-based model field theory, the Global Color-symmetry Model (GCM), was used to calculate the generalized impulse approximation contribution to the electromagnetic pion form factor at space-like q{sup 2} on the domain [0,10] GeV{sup 2}. In effective field theories this form factor is sometimes understood as simply being due to Vector Meson Dominance (VMD) but this does not allow for a simple connection with QCD where the VMD contribution is of higher order than that of the quark core. In the GCM the pion is treated as a composite bound state of a confined quark and antiquark interacting via the exchange of colored vector-bosons. A direct study of the quark core contribution is made, using a quark propagator that manifests the large space-like-q{sup 2} properties of QCD, parameterizes the infrared behavior and incorporates confinement. It is shown that the few parameters which characterize the infrared form of the quark propagator may be chosen so as to yield excellent agreement with the available data. In doing this one directly relates experimental observables to properties of QCD at small space-like-q{sup 2}. The incorporation of confinement eliminates endpoint and pinch singularities in the calculation of F{sub {pi}}(q{sup 2}). With asymptotic freedom manifest in the dressed quark propagator the calculation yields q{sup 4}F{sub {pi}}(q{sup 2}) = constant, up to [q{sup 2}]- corrections, for space-like-q{sup 2} {approx_gt} 35 GeV{sup 2}, which indicates that soft, nonperturbative contributions dominate the form factor at presently accessible q{sup 2}. This means that the often-used factorization Ansatz fails in this exclusive process. A paper describing this work was submitted for publication. In addition, these results formed the basis for an invited presentation at a workshop on chiral dynamics and will be published in the proceedings.

  10. Les Brulures Electriques par Haut Voltage - A Propos de 10 Cas

    PubMed Central

    Belmir, R.; Fejjal, N.; El Omari, M.; El Mazouz, S.; Gharib, N.; Abassi, A.; Belmahi, A.

    2008-01-01

    Summary Les accidents électriques par haute tension (AEHT) provoquent des brûlures profondes par effet Joule le long des axes vasculo-nerveux entre les points d'entrée et de sortie, qui sont le siège de lésions délabrantes. Les Auteurs rapportent une série de dix cas d'AEHT admis au service de chirurgie réparatrice et de brûlés de l'Hôpital Ibn Sina de Rabat à travers laquelle ils étudient les caractéristiques épidémiologiques, cliniques et thérapeutiques. Tous les patients étaient des adultes de sexe masculin dont l'âge moyen était de 31 ans. Dans 70% des cas, ces brûlures étaient secondaires à un contact avec les distributeurs d'électricité avec une surface brûlée inférieure à 20%. Le traitement des lésions électrothermiques a nécessité des interventions itératives avec amputation des segments de membres nécrosés dans 70% des cas, dont les suites étaient marquées par des séquelles fonctionnelles invalidantes. La prévention des AEHT, en particulier pour les accidents du travail au sein des professions exposées, reste fondamentale. PMID:21991124

  11. Development and Application of LES for the Unsteady Flows in Turbomachinery

    NASA Technical Reports Server (NTRS)

    Hah, Chunill

    2012-01-01

    Recent progress in applying the Large Eddy Simulation (LES) to flow control in turbomachinery is reviewed. The development of flow control in turbomachinery requires accurate prediction of detailed three-dimensional flow structures including unsteady motion of various vortex systems. It has been shown that LES provides more realistic description of the complex flowfields compared to steady and unsteady Reynolds-averaged Navier- Stokes simulations (RANS & URANS).

  12. Fluctuations quantiques et instabilites structurales dans les conducteurs a basse dimensionalite

    NASA Astrophysics Data System (ADS)

    Dikande, Alain Moise

    Un engouement particulier s'est manifeste ces dernieres annees pour les systemes electroniques fortement correles, ce en rapport avec l'immense richesse de leurs proprietes physiques. En general, ces proprietes sont induites par la presence d'interactions entre electrons qui, combinees a la structure du reseau moleculaire, donnent parfois lieu a une tres grande variete de phases electroniques et structurales ayant des incidences directes sur les phenomenes de transport dans ces materiaux. Les systemes electroniques couples a un reseau moleculaire et designes systemes electron-phonon font partie de cette classe de materiaux qui ont recemment capte l'attention, en raison notamment de la competition entre plusieurs echelles d'energie dans un environnement caracterise par une forte anisotropie cristalline et une dynamique moleculaire assez importante. En effet, en plus des proprietes electroniques et structurales particulieres la dimensionalite de ces systemes contribue egalement a leur richesse. Ainsi, une tres forte anisotropie structurale peut rehausser de facon considerable l'importance des interactions entre electrons et entre molecules constituant le reseau au point ou la physique du systeme soit regie par de tres fortes fluctuations. Ce dernier contexte est devenu un domaine a part de la physique des systemes fortement correles, a savoir celui des les phenomenes critiques quantiques . Parmi les systemes electron-phonon, on retrouve les composes inorganique KCP et organique TTF-TCNQ decouverts durant les annees 70, et explores en profondeur a cause de leur tendance vers une instabilite du type onde de densite de charge a basse temperature. Ces composes, en general designes systemes de Peierls en reference a l'instabilite de leurs structures electroniques regie par le reseau moleculaire, ont recemment connu un regain d'interet a la lumiere des nouveaux developpements dans les techniques de caracterisation des structures electroniques ainsi que sur le plan de

  13. STS-26 Mission Specialist Nelson in LES prior to JSC WETF emergency exercises

    NASA Technical Reports Server (NTRS)

    1988-01-01

    STS-26 Discovery, Orbiter Vehicle (OV) 103, Mission Specialist (MS) George D. Nelson, wearing newly designed (navy blue) launch and entry suit (LES), gets some moral support from Aimee Tess Nelson, his sixteen-year-old lifeguard daughter. Nelson was about to participate in a simulation of escape and rescue operations utilizing the crew escape system (CES) pole mode of egress from the Space Shuttle. Nelson is equipped with the LES partial pressure suit and parachute gear.

  14. Hybrid RANS/LES simulations of bluff-body flows on unstructured grids

    NASA Astrophysics Data System (ADS)

    Salvetti, Maria Vittoria; Camarri, Simone; Koobus, Bruno; Dervieux, Alain

    2004-11-01

    A hybrid RANS/LES model is set up by blending a k-\\varepsilon model and the Smagorinsky model according to the LNS idea [1], i.e. using the minimum value among the eddy viscosities given by the RANS and the LES closures. The Navier-Stokes equations are discretized by a mixed finite-volume/finite-element formulation applicable to unstrucured grid. A low diffusion MUSCL scheme, designed for LES, is adopted [2]. Both explicit (Runge-Kutta) and implicit (second-order accurate) time advancing can be used. The hybrid model is applied to the simulation of the flows around a square cylinder and around a sphere. Results are compared with those obtained with RANS and LES and with experimental data. REFERENCES: [1] P.Batten.LNS-An approach towards embedded LES. In phAIAA Paper 2002-0427. American Institute of Aeronautics and Astronautics, 2002. [2] S.Camarri,M.V.Salvetti,B.Koobus and A.Dervieux. A low-diffusion MUSCL scheme for LES on unstructured grids. phComputers and Fluids 2003; 33:1101-1129.

  15. Progress Towards an LES Wall Model Including Unresolved Roughness

    NASA Astrophysics Data System (ADS)

    Craft, Kyle; Redman, Andrew; Aikens, Kurt

    2015-11-01

    Wall models used in large eddy simulations (LES) are often based on theories for hydraulically smooth walls. While this is reasonable for many applications, there are also many where the impact of surface roughness is important. A previously developed wall model has been used primarily for jet engine aeroacoustics. However, jet simulations have not accurately captured thick initial shear layers found in some experimental data. This may partly be due to nozzle wall roughness used in the experiments to promote turbulent boundary layers. As a result, the wall model is extended to include the effects of unresolved wall roughness through appropriate alterations to the log-law. The methodology is tested for incompressible flat plate boundary layers with different surface roughness. Correct trends are noted for the impact of surface roughness on the velocity profile. However, velocity deficit profiles and the Reynolds stresses do not collapse as well as expected. Possible reasons for the discrepancies as well as future work will be presented. This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation grant number ACI-1053575. Computational resources on TACC Stampede were provided under XSEDE allocation ENG150001.

  16. RANS and LES simulations of the airflow through nasal cavities

    NASA Astrophysics Data System (ADS)

    Lamberti, Giacomo

    2015-11-01

    The prediction of detailed flow patterns in nasal cavities using computational fluid dynamics (CFD) can provide essential information on the potential relationship between patient-specific geometrical characteristics and health problems. The long-term goal of the OpenNOSE project is to develop a reliable open-source computational tool based on the OpenFOAM CFD toolbox that can assist surgeons in their daily practice. The objective of this study was to investigate the effect of the turbulence model and boundary conditions on simulations of the airflow in nasal cavities. The geometry, including paranasal sinuses, was reconstructed from a carefully selected CT scan, and RANS and LES simulations were carried out for steady inspiration and expiration. At a flow rate near 20 l/min, the flow is laminar in most of the domain. During the inspiration phase, turbulence develops in nasopharynx and oropharynx regions; during the expiration phase, another vortical region is observed down the nostrils. A comparison between different boundary conditions suggests the use of a total pressure condition, or alternatively a uniform velocity, at the inlet and outlet. In future work the same geometry will be used for setting up a laboratory experiment, intended to cross-validate the numerical results.

  17. LES ARM Symbiotic Simulation and Observation (LASSO) Implementation Strategy

    SciTech Connect

    Gustafson Jr., WI; Vogelmann, AM

    2015-09-01

    This document illustrates the design of the Large-Eddy Simulation (LES) ARM Symbiotic Simulation and Observation (LASSO) workflow to provide a routine, high-resolution modeling capability to augment the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility’s high-density observations. LASSO will create a powerful new capability for furthering ARM’s mission to advance understanding of cloud, radiation, aerosol, and land-surface processes. The combined observational and modeling elements will enable a new level of scientific inquiry by connecting processes and context to observations and providing needed statistics for details that cannot be measured. The result will be improved process understanding that facilitates concomitant improvements in climate model parameterizations. The initial LASSO implementation will be for ARM’s Southern Great Plains site in Oklahoma and will focus on shallow convection, which is poorly simulated by climate models due in part to clouds’ typically small spatial scale compared to model grid spacing, and because the convection involves complicated interactions of microphysical and boundary layer processes.

  18. Turbulence effects on hemolysis by revisiting experiments with LES computations

    NASA Astrophysics Data System (ADS)

    Ozturk, Mesude; O'Rear, Edgar; Papavassiliou, Dimitrios

    2015-11-01

    Determining mechanically stimulated red blood cell trauma as a function of turbulence properties is required to design prosthetic heart devices. Because blood is typically exposed to turbulence in such devices, the design of prosthetic heart devices depends on determining the effect of turbulent stresses on hemolysis. While turbulent stresses increase hemolysis when cells are exposed to them, turbulent flow characteristics in the vicinity of lysed blood cells, and the mechanism of cell damage remains uncertain. In this work, LES computations are used to investigate the effect of turbulent eddy structure on cell damage. The flow was simulated for classic Couette and capillary tube experiments, in order to examine the relation between hemolysis turbulence properties related to the dissipation of turbulent kinetic energy. The hypothesis tested is that eddies that are close in size with the erythrocytes are the ones that are responsible for hemolysis, rather than Reynolds stresses or viscous stresses. We define extensive measures, like the eddy areas for small eddies comparable to the size of the red blood cells, to provide a more general understanding of the mechanical cause of blood trauma.

  19. Marine Propeller Analysis with an Immersed Boundary LES methodology

    NASA Astrophysics Data System (ADS)

    Schroeder, Seth; Balaras, Elias

    2011-11-01

    Modern marine propeller design and analysis techniques employ a wide range of computational methods to balance time constraints and accuracy requirements. Potential flow and RANS based methods have historically comprised the tools necessary for design and global performance analysis. However, for analysis where unsteady flow phenomena are of interest, eddy resolving methodologies are required. In the present study we use the large-eddy simulation (LES) approach coupled with an immersed-boundary (IB) method to perform computations of the flow around a rotating propeller at laboratory Reynolds numbers. Compared to classical boundary conforming strategies our formulation eliminates meshing overhead time and allows for body motion without additional treatments such as overset or dynamic meshing. The structured Cartesian grid also allows for a non-dissipative solver which conserves mass, momentum and energy. We will focus on the Italian Ship Model Basin (INSEAN) E1619 propeller and compare the predictions of our method to experimental results. The E1619 propeller is a 7-bladed submarine stock propeller that has been the subject of extensive experimental testing and previous computational studies. Supported by ONR.

  20. Experimental assessment of subgrid mixing models for LES

    NASA Astrophysics Data System (ADS)

    Sun, O. S.; Su, L. K.

    2003-11-01

    Large eddy simulation (LES) models for subgrid scalar flux and dissipation include dynamic structure models,(Chumakov, S. and Rutland, C.J., submitted to phAIAA J.) based on scale similarity ideas, as well as one-equation models that relate subgrid variance and dissipation.(Jiménez, C. phet al.) phPhys. Fluids 13 (2001) Previously, these models have only been tested a posteriori, or a priori using data from direct numerical simulations. Here, these models are evaluated a priori using simultaneous planar laser-induced fluorescence (PLIF) and particle image velocimetry (PIV) measurements in a turbulent crossflowing jet. The models are tested by filtering the experimental data and comparing the results with computed model quantities. The measurements have sufficient resolution to permit accurate determination of subgrid quantities. Of primary interest is the structural accuracy of the models, which can be assessed by computing a correlation coefficient between exact and modeled terms. Preliminary results suggest that the assumptions of scale similarity underlying the dynamic structure models are more valid for modeling subgrid scalar flux than subgrid scalar dissipation.

  1. Nucleon elastic form factors

    SciTech Connect

    D. Day

    2007-03-01

    The nucleon form factors are still the subject of active investigation even after an experimental effort spanning 50 years. This is because they are of critical importance to our understanding of the electromagnetic properties of nuclei and provide a unique testing ground for QCD motivated models of nucleon structure. Progress in polarized beams, polarized targets and recoil polarimetry have allowed an important and precise set of data to be collected over the last decade. I will review the experimental status of elastic electron scattering from the nucleon along with an outlook for future progress.

  2. Space form of motionsickness

    NASA Technical Reports Server (NTRS)

    Komendantov, G. L.; Kopanev, V. I.

    1975-01-01

    Spacesickness under weightlessness conditions is explained mainly by disruption of the activity of the functional system perceiving space and participating in carrying out the balancing function, consisting, in particular, of the vestibular, proprioceptive, interoceptive, visual and cutaneomechanical analyzers. It can be assumed that, under specific conditions, Coriolis acceleration also is a cause of spacesickness. Adaptation is possible by formation of a new functional system which is adequate to the new mechanical conditions of weightlessness. Selection, training, creation of optimum conditions in the spacecraft cabin, medicinal, and technical improvement of spacecraft play an important role in prophylaxis of the space form of seasickness.

  3. GlassForm

    Energy Science and Technology Software Center (ESTSC)

    2011-09-16

    GlassForm is a software tool for generating preliminary waste glass formulas for a given waste stream. The software is useful because it reduces the number of verification melts required to develop a suitable additive composition. The software includes property models that calculate glass properties of interest from the chemical composition of the waste glass. The software includes property models for glass viscosity, electrical conductivity, glass transition temperature, and leach resistance as measured by the 7-daymore » product consistency test (PCT).« less

  4. Spun Almost Normal Form

    NASA Astrophysics Data System (ADS)

    Paullin, Katherine L.

    Many of a 3-manifold's properties are determined by the surfaces they contain, and this knowledge leads to the foundation of decision algorithms for 3- manifolds. Popular work influencing the work of 3-manifold algorithms has it's roots in normal surface theory. In a triangulated 3-manifold, Haken and Kneser showed that we could put any incompressible surface into normal form. Expanding on those techniques, Rubinstein and Stocking later showed we could put any strongly irreducible surface into almost normal form. Walsh has more recently shown that in an ideal triangulation of a hyperbolic manifold many surfaces can be spun normalized. One unsolved problem in 3-manifold algorithms is studying the complexity of Lens Space Recognition. Spun almost normalization appears to be a part of solving this larger problem. In this dissertation, I will first discuss a nontraditional technique using graphs of equivalence classes of compressing disks that allows us to take a combinatorial approach to generalize the result of Walsh's to nonhyperbolic manifolds. Using that method, I'll also explore the conditions needed to show that a surface can be spun almost normalized.

  5. MLKL forms cation channels

    PubMed Central

    Xia, Bingqing; Fang, Sui; Chen, Xueqin; Hu, Hong; Chen, Peiyuan; Wang, Huayi; Gao, Zhaobing

    2016-01-01

    The mixed lineage kinase domain-like (MLKL) protein is a key factor in tumor necrosis factor-induced necroptosis. Recent studies on necroptosis execution revealed a commitment role of MLKL in membrane disruption. However, our knowledge of how MLKL functions on membrane remains very limited. Here we demonstrate that MLKL forms cation channels that are permeable preferentially to Mg2+ rather than Ca2+ in the presence of Na+ and K+. Moreover, the N-terminal domain containing six helices (H1-H6) is sufficient to form channels. Using the substituted cysteine accessibility method, we further determine that helix H1, H2, H3, H5 and H6 are transmembrane segments, while H4 is located in the cytoplasm. Finally, MLKL-induced membrane depolarization and cell death exhibit a positive correlation to its channel activity. The Mg2+-preferred permeability and five transmembrane segment topology distinguish MLKL from previously identified Mg2+-permeable channels and thus establish MLKL as a novel class of cation channels. PMID:27033670

  6. Bipolar pulse forming line

    DOEpatents

    Rhodes, Mark A.

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  7. La violence sur les réseaux canadiens de télévision

    PubMed Central

    Paquette, Guy

    2003-01-01

    La question des effets de la violence à la télévision occupe une place très importante dans l’opinion publique depuis les vingt dernières années, et des centaines d’études y ont été consacrées. Plusieurs chercheurs concluent à une influence négative de cette violence sur le comportement. Le public, les diffuseurs et les autorités politiques ont tous endossé l’idée de réduire la quantité totale de violence présentée au petit écran – en particulier dans les émissions accessibles aux enfants. Nous avons analysé un millier d’émissions de fiction présentées entre 1993 et 2001 sur les principaux réseaux généralistes de télévision au Canada : TVA et TQS ainsi que CTV et Global pour les réseaux privés français et anglais, ainsi que Radio-Canada français et anglais pour les réseaux publics. La méthodologie utilisée est l’analyse de contenu classique, où l’acte de violence constitue l’unité d’analyse. Les données recueillies démontrent que la quantité de violence a augmenté régulièrement depuis 1993, malgré la volonté affirmée des télédiffuseurs de présenter une programmation moins violente. C’est le cas du nombre brut d’actes et du nombre d’actes à l’heure, qui est lui aussi en forte croissance. Les réseaux privés véhiculent trois fois plus de violence que les réseaux publics. On constate également qu’une très forte proportion d’actes de violence figure dans des émissions qui commencent avant 21 h, et que de nombreux enfants y sont probablement exposés. Nous signalons finalement la place de plus en plus importante occupée par la violence psychologique. PMID:20020031

  8. Les manifestations ophtalmologiques de la maladie de Behçet, à propos de 33 cas

    PubMed Central

    Andaloussi, Idriss Benatiya; Alami, Bouchra; Abdellaoui, Meryem; Bhallil, Salima; Bono, Wafae; Tahri, Hicham

    2012-01-01

    Les manifestations ophtalmologiques au cours de la maladie de Behçet sont dominées par les uvéites, les vascularites rétiniennes et les thromboses veineuses rétiniennes. Nous rapportons une étude rétrospective portant sur tous les malades atteints de la maladie de Behçet, hospitalisés au sein du service d'Ophtalmologie de Fès de Janvier 2007 à Décembre 2009. Au total ce sont 33 patients qui sont inclut dans l'étudeLa moyenne d’âge est de 28,4 ans. Le délai moyen de consultation varie entre 1 jour et 3 ans. L'atteinte oculaire est bilatérale chez 26 patients (78,8% des yeux). L'AV est très basse avant le traitement: 28,8% à moins de 1/10. Les manifestations oculaires sont dominées par l'uvéite avec 77,3%, suivie de la vascularite rétinienne 54, 5% et la maculopathie 51, 5%. Le pourcentage des yeux dont l'AV était inférieur à 1/10 est passé à 19,7% après traitement. La fréquence de l'atteinte oculaire au cours de la maladie de Behçet est diversement appréciée selon les auteurs et selon le mode de recrutement des patients: elle va de 29% à 100%. L'atteinte uvéale est la plus fréquente des manifestations ophtalmologiques. Les lésions vasculaires rétiniennes sont dominées par la vascularite rétinienne essentiellement la périphlébite aussi bien au pôle postérieur qu’à la périphérie rétinienne. En l'absence de traitement et de mauvaise observance, le pronostic oculaire de la maladie de Behçet est très mauvais. La cécité s'installe dans 13 à 32%. Les manifestations ophtalmologiques au cours de la maladie de Behçet ont une valeur considérable, tant sur le plan diagnostique que pronostique. Notre étude a permis de décrire les aspects cliniques de l'atteinte oculaire de la maladie de Behçet dans un service d'Ophtalmologie tertiaire au Maroc. PMID:23396991

  9. L’opinion des étudiants en médecine de Québec sur les punitions corporelles

    PubMed Central

    Labbé, Jean; Laflamme, Nathalie; Makosso-Kallyth, Sun

    2012-01-01

    OBJECTIF : L’objectif de la présente étude est de décrire l’opinion des étudiants en médecine de l’Université Laval sur le sujet controversé des punitions corporelles envers les enfants. MÉTHODOLOGIE : Un sondage a été réalisé auprès des étudiants en quatrième année de médecine de l’Université Laval pendant cinq années consécutives, soit de l’année scolaire 2006–2007 jusqu’à celle de 2010–2011 inclusivement, à l’occasion d’un séminaire portant sur la maltraitance envers les enfants. RÉSULTATS : Sur les 712 étudiants interrogés, 74 % étaient de sexe féminin et 91 % étaient âgés de moins de 30 ans. Concernant les punitions corporelles envers les enfants, 22 % des répondants s’y sont déclarés favorables. Plus de garçons que de filles se sont prononcés en faveur de cette pratique disciplinaire, soit 31 % des garçons par rapport à 18 % des filles respectivement (RC rajusté = 2,2, IC 95 % :1,4 à 3,4; p=0,0003). Près de 36 % des étudiants ayant eu des punitions corporelles y étaient favorables, comparativement à seulement 4 % de ceux qui n’avaient pas connu cette forme de discipline (RC rajusté = 16,5, IC 95 % :8,6 à 31,4; p<0,0001). Parmi ceux qui ont mentionné avoir été victimes d’abus physique, 25 % se sont déclarés en faveur de cette pratique, ce qui est similaire au 21 % observés chez ceux qui n’en ont pas été victimes (p=0,52). CONCLUSION : Alors que plusieurs organismes médicaux se sont prononcés contre l’utilisation des punitions corporelles, plus d’un futur médecin sur cinq à Québec se déclare favorable à cette méthode disciplinaire et pourrait influencer la conduite des parents en ce sens. PMID:24179417

  10. 78 FR 58605 - Proposed Collection; Comment Request for Form 8453-EMP, Form 8453-F, Form 8453-FE, Form 8879-F...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-24

    ... 8879-F, IRS e-file Signature Authorization for Form 1041. DATES: Written comments should be received on... (Form 1041). Title: U.S. Estate or Trust Declaration and Signature for an IRS e- File Return. OMB Number... Electronic Filing. This form will only be used as a signature letter to Form 1041. This new form...

  11. Shell forming system

    NASA Technical Reports Server (NTRS)

    Kendall, Jr., James M. (Inventor); Wang, Taylor G. (Inventor); Elleman, Daniel D. (Inventor)

    1987-01-01

    An apparatus is provided for forming gas-filled spheres of metal, glass or other material, which produces spheres (12) of uniform size and wall thickness in a relatively simple system. The system includes concentric nozzles, including an inner nozzle (18) through which gas flows and and an outer nozzle (20), which jointly define an annular passageway (50) through which a liquid flows. The flow rates are adjusted so that the gas flows at greater velocity than does the liquid, out of their respective nozzles, e.g. three times as great, in order to produce an extrusion (30) which undergoes axisymmetric oscillations resulting in the pinch off into hollow spheres with very uniform spacing. The system is useful not only where gas-filled spheres are required, but also is useful to accurately control the dispensing of solid, liquid, or gaseous materials.

  12. Shell forming apparatus

    NASA Technical Reports Server (NTRS)

    Wang, Taylor G. (Inventor); Granett, Dan (Inventor); Akutagawa, Wesley M. (Inventor)

    1987-01-01

    A nozzle assembly is described for use in a system that forms small gas-filled shells, which avoids the need for holding a miniature inner nozzle precisely concentric with a miniature outer nozzle. The outer nozzle has a diameter which is less than about 0.7 millimeter, which results in fluid passing through the nozzle having a progressively greater velocity at locations progressively further from the walls of the outer nozzle across most of the nozzle. This highly variable velocity profile automatically forces gas to the center of the outer nozzle. The end of the inner nozzle, which emits gas, is spaced upstream from the tip of the outer nozzle, to provide a distance along which to center the gas. This self-centering characteristic permits the inner nozzle to be positioned so its axis is not concentric with the axis of the outer nozzle.

  13. Pion form factor

    SciTech Connect

    Ryong Ji, C.; Pang, A.; Szczepaniak, A.

    1994-04-01

    It is pointed out that the correct criterion to define the legal PQCD contribution to the exclusive processes in the lightcone perturbative expansion should be based on the large off-shellness of the lightcone energy in the intermediate states. In the lightcone perturbative QCD calculation of the pion form factor, the authors find that the legal PQCD contribution defined by the lightcone energy cut saturates in the smaller Q{sup 2} region compared to that defined by the gluon four-momentum square cut. This is due to the contribution by the highly off-energy-shell gluons in the end point regions of the phase space, indicating that the gluon four-momentum-square cut may have cut too much to define the legal PQCD.

  14. Nucleon Electromagnetic Form Factors

    SciTech Connect

    Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

    2007-10-01

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

  15. Spray-formed tooling

    NASA Astrophysics Data System (ADS)

    McHugh, K. M.; Key, J. F.

    The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be designed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

  16. Spray-formed tooling

    SciTech Connect

    McHugh, K.M.; Key, J.F.

    1994-12-31

    The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be de signed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

  17. Forming Spirals From Shadows

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-07-01

    What causes the large-scale spiral structures found in some protoplanetary disks? Most models assume theyre created by newly-forming planets, but a new study suggests that planets might have nothing to do with it.Perturbations from Planets?In some transition disks protoplanetary disks with gaps in their inner regions weve directly imaged large-scale spiral arms. Many theories currently attribute the formation of these structures to young planets: either the direct perturbations of a planet embedded in the disk cause the spirals, or theyre indirectly caused by the orbit of a planetary body outside of the arms.Another example of spiral arms detected in a protoplanetary disk, MWC 758. [NASA/ESA/ESO/M. Benisty et al.]But what if you could get spirals without any planets? A team of scientists led by Matas Montesinos (University of Chile) have recently published a study in which they examine what happens to a shadowed protoplanetary disk.Casting Shadows with WarpsIn the teams setup, they envision a protoplanetary disk that is warped: the inner region is slightly tilted relative to the outer region. As the central star casts light out over its protoplanetary disk, this disk warping would cause some regions of the disk to be shaded in a way that isnt axially symmetric with potentially interesting implications.Montesinos and collaborators ran 2D hydrodynamics simulations to determine what happens to the motion of particles within the disk when they pass in and out of the shadowed regions. Since the shadowed regions are significantly colder than the illuminated disk, the pressure in these regions is much lower. Particles are therefore accelerated and decelerated as they pass through these regions, and the lack of axial symmetry causes spiral density waves to form in the disk as a result.Initial profile for the stellar heating rate per unit area for one of the authors simulations. The regions shadowed as a result of the disk warp subtend 0.5 radians each (shown on the left

  18. Photovaporisation prostatique au laser chez les patients à haut risque hémorragique

    PubMed Central

    Bouabdallah, Zakaria; Kharbouchi, Amine; Colau, Alexandre; Cariou, Gerard

    2013-01-01

    Introduction Les patients sous traitement anticoagulant sont à risque élevé de saignement lors de la résection transurétrale de la prostate ou de l'adénomectomie par taille vésicale et ils se voient souvent récuser pour la chirurgie de l'hyperplasie bénigne de la prostate symptomatique. En Utilisant la photovaporisation de la prostate, les patients à haut risque peuvent subir en toute sécurité la chirurgie. Nous avons évalué l'innocuité et l'efficacité de la photovaporisation de la prostate (PVP) chez les patients sous anticoagulants en cours avec les dérivés de la coumarine, l'aspirine ou le clopidogrel, se plaignant de symptômes d'hypertrophie bénigne de la prostate. Méthodes Entre janvier 2009 et mai 2010, 47 hommes sous anticoagulation systémique ont subi une photovaporisation de la prostate. Les données ont été recueillies sur les caractéristiques démographiques, les comorbidités, les complications, la natrémie, l'hémoglobine, le débit urinaire maximal, le résidu post-mictionnel, l'IPSS et les complications. Résultats L'âge moyen était de 78 ans, le volume prostatique moyen était de 44g et le PSA était de 3.4ng/ml. Parmi les 10 patients (21.2%) étaient sous AVK, 27 (57.4%) étaient sous aspirine, 2 (4.2%) étaient sous clopidogrel, un sous fondaparinux et 6 (12.7%) étaient sous 2 anticoagulants ou plus. Le score ASA moyen était de 3. La durée moyenne de fonctionnement de l'appareil était de 38 minutes, l'énergie moyenne utilisée était de 200kJ. La durée moyenne d'hospitalisation était de 2 jours. Les complications survenant dans les 30 jours comprenaient une infection urinaire chez 5 patients (10.6%), une dysurie chez 4 patients et une hémorragie retardée chez 4 autres (8.5%). Un seul de ces patients a nécessité une transfusion sanguine et aucun patient n'a nécessité une réintervention. En 3 mois de suivi un seul patient a nécessité une incision du col vésical pour sclérose du col. Aucune incontinence

  19. Simulation numérique d'écoulement compressible dans les joints labyrinthe

    NASA Astrophysics Data System (ADS)

    Sriti, M.; Agouzoul, M.; Ouazar, D.; Micheau, P.

    1997-05-01

    The labyrinth seals are the devices used machines which serve to restrict the leakages crossing a carter (or stator) by a rotating shaft (or rotor) and to avoid the important friction to high rotation speeds. These devices, which in addition behave as shaft bearings, can modify the dynamics characteristics of the line of the shaft in which they are integrated. The present work has been carried out with the purpose of controlling better the flows within the labyrinth seals and to determine their static (leakage-pressure) and dynamic (stiffness and damping coefficients) characteristics. It's based on the development of a global numerical model, and on the integration of the obtained correlations by 3D axisymmetric computation in this model. Les joints labyrinthe sont des dispositifs utilisés dans les machines, ils servent à limiter les fuites à la traversée d'un carter (ou stator) par un arbre tournant (ou rotor) et éviter le frottement important aux vitesses de rotation élevées. Ces dispositifs, qui de plus, se comportent comme des paliers, peuvent modifier les caractéristiques dynamiques de la ligne d'arbre dans laquelle ils sont intégrés. Le travail présenté a été effectué dans le but de mieux maîtriser les écoulements dans les joints labyrinthe et de déterminer leurs caractéristiques statiques (débit-pression) et dynamiques (coefficients de raideur et d'amortissement). Il s'appuie sur le développement d'outils numériques intégrant dans les calculs globaux des résultats de calculs locaux (3D axisymétriques).

  20. Mesusage du tramadol par les adolescents et jeunes adultes en situation de rue

    PubMed Central

    Maiga, Djibo Douma; Seyni, Houdou; Moussa, Ali Ousmane; Sidikou, Amadou

    2012-01-01

    L’objectif de cette étude transversale et descriptive était de décrire quelques caractéristiques de l’addiction au Tramadol chez les adolescents et jeunes adultes en situation de rue, rattachés aux centres d’écoute du Service Educatif, Judiciaire et préventif (SEJUP) de Niamey. Le recueil des données a porté sur les variables sociodémographiques et la consommation de tramadol. L’analyse des données a calculé les moyennes, minima, maxima et écarts types. Les résultats indiquent que : trois centres d’écoute sur huit participaient à l’étude. L’échantillon constituait 61 adolescents et jeunes adultes dont l’âge moyen était de 17,49 ans. L’analyse indique que 47 adolescents et jeunes adultes de toutes les catégories sociodémographiques (sexe, niveau d’instruction, provenance familiale ; région de provenance ; antécdents médicaux; antécédents judiciaires) étaient usagers du Tramadol. 46 étaient dépendants du Tramadol. La quantité moyenne consommée était de 1455,31 ± 901,4mg. Le mésusage du tramadol par les jeunes en situation de rue est probablement une des conséquences de la vente illicite et libre des médicaments, dont il est urgent de préciser les données médicales et sociales. PMID:23330046

  1. Les liquéfacteurs d'hélium en France

    NASA Astrophysics Data System (ADS)

    Gianèse, P.; Maréchal, J. C.

    1991-02-01

    This article is a synopsis of a meeting held at the begining of 1990 between the managers of the principal helium liquefaction installations in France. The mains types of helium liquefiers encountered are described and then the French installations are listed and detailed. The problems encountered in different parts of the installations (liquefier, recovery system, purifying, ...) during the last few years are discussed. In a final section about the economics of liquefaction, the cost of liquefying helium and nitrogen is compared with the cost of purchasing these liquids commercially. Cet article constitue la synthèse d'une réunion tenue début 1990 qui regroupait les principaux responsables français des centres de liquéfaction d'hélium. L'article décrit successivement les principaux types de liquéfacteurs rencontrés puis recense les installations françaises en fournissant leurs principales caractéristiques. Il énumère ensuite les problèmes survenus avec les différents éléments d'une installation (liquéfacteur, circuit de récupération, épurateur, ...). L'article s'achève par un volet économique fournissant les coûts moyens actuels soit pour l'achat, soit pour la liquéfaction sur place de l'hélium et de l'azote liquide. Une comparaison entre les deux solutions est effectuée.

  2. Distribution épidémiologique de l'infection à VIH chez les femmes enceintes dans les dix régions du Cameroun et implications stratégiques pour les programmes de prévention

    PubMed Central

    Billong, Serge-Clotaire; Fokam, Joseph; Billong, Edson-Joan; Nguefack-Tsague, Georges; Essi, Marie-Josée; Fodjo, Raoul; Sosso, Samuel-Martin; Gomba, Armelle; Mosoko-Jembia, Joseph; Loni-Ekali, Gabriel; Colizzi, Vittorio; Bissek, Anne-Cécile Zoung-Kani; Monebenimp, Francisca; Nfetam, Jean-Bosco Elat

    2015-01-01

    Introduction Le Cameroun se situe dans un contexte d’épidémie généralisée du VIH. La sous-population des femmes enceintes, facilement accessible au sein de la population générale, représente une cible probante pour mener la surveillance du VIH et estimer l’évolution épidémiologique. L'objectif de notre étude était d’évaluer la distribution épidémiologique du VIH chez les femmes enceintes. Méthodes Étude transversale menée en 2012 chez 6521 femmes enceintes (49,3% âgées de 15-24 ans) en première consultation prénatale (CPN1) dans 60 sites des 10 régions Camerounaises. L'algorithme en série a été utilisé pour le sérodiagnostic du VIH. Résultats La prévalence du VIH était de 7,8% (508/6521), avec une différence non significative (p = 0,297) entre milieu rural (7,4%) et milieu urbain (8,1%). En zone rurale, cette prévalence variait de 0,7% à l'Extrême-Nord à 11,8% au Sud. Cependant, en zone urbaine elle variait de 4% à l'Ouest à 11,1% au Sud-Ouest. Suivant l’âge, la prévalence était plus élevée (11,3%) chez les femmes de 35-39 ans. Suivant le niveau de scolarisation, la prévalence du VIH était plus faible (4,4%) chez celles non-scolarisées, et plus élevée (9,3%) chez celles ayant un niveau primaire. Selon la profession, l'infection était plus élevée chez les coiffeuses (15,5%), secrétaires (14,8%), commerçantes (12,9%) et institutrices/enseignantes (10,8%). Conclusion La prévalence du VIH reste élevée chez les femmes enceintes au Cameroun, sans distinction entre milieux rural et urbain. Les stratégies de prévention devraient s'orienter préférentiellement chez les femmes enceintes âgées, celles du niveau d'instruction primaire, et celles du secteur des petites et moyennes entreprises. PMID:26090037

  3. La prévention des blessures non intentionnelles chez les enfants et adolescents autochtones au Canada

    PubMed Central

    Banerji, Anna

    2012-01-01

    RÉSUMÉ Les blessures non intentionnelles sont la principale cause de décès chez les enfants et adolescents autochtones canadiens, à un taux de trois à quatre fois la moyenne nationale. Non seulement les décès et les blessures invalidantes dévastent les familles et les communautés, mais elles font également d’énormes ravages sur les ressources de santé. L’absence de statistiques, de surveillance continue ou de programmes de prévention des blessures à l’égard des enfants et adolescents autochtones exacerbe les coûts en matière de main-d’œuvre et de santé. Les communautés autochtones sont hétérogènes sur le plan culturel, qu’il s’agisse de l’accès aux ressources ou même des risques et des types de blessures. Pourtant, en général, ces communautés sont beaucoup plus susceptibles d’être pauvres, d’habiter dans un logement insalubre et d’éprouver de la difficulté à accéder aux soins de santé, des facteurs qui accroissent le risque et les conséquences des blessures. Il existe un besoin urgent de surveillance des blessures, de recherche, de renforcement des capacités, de diffusion des connaissances et de programmes de prévention des blessures qui sont axés sur les populations autochtones. Pour prévenir les blessures de manière efficace, il faut adopter des démarches multidisciplinaires, coopératives et durables, fondées sur des pratiques exemplaires, tout en étant spécifiques et sensibles sur le plan culturel et linguistique.

  4. Moon (Form-Origin)

    NASA Astrophysics Data System (ADS)

    Tsiapas, Elias

    2014-05-01

    When the Earth was formed, it was in a state of burning heat. As time went by, temperature on the planet's surface was falling due to radiation and heat transfer, and various components (crusts) began taking solid form at the Earth's poles. The formation of crusts took place at the Earth's poles, because the stirring of burning and fluid masses on the surface of the Earth was significantly slighter there than it was on the equator. Due to centrifugal force and Coriolis Effect, these solid masses headed towards the equator; those originating from the North Pole followed a south-western course, while those originating from the South Pole followed a north-western course and there they rotated from west to east at a lower speed than the underlying burning and liquid earth, because of their lower initial linear velocity, their solid state and inertia. Because inertia is proportional to mass, the initially larger solid body swept all new solid ones, incorporating them to its western side. The density of the new solid masses was higher, because the components on the surface would freeze and solidify first, before the underlying thicker components. As a result, the western side of the initial islet of solid rocks submerged, while the east side elevated. . As a result of the above, this initial islet began to spin in reverse, and after taking on the shape of a sphere, it formed the "heart" of the Moon. The Moon-sphere, rolling on the equator, would sink the solid rocks that continued to descend from the Earth's poles. The sinking rocks partially melted because of higher temperatures in the greater depths that the Moon descended to, while part of the rocks' mass bonded with the Moon and also served as a heat-insulating material, preventing the descended side of the sphere from melting. Combined with the Earth's liquid mass that covered its emerging eastern surface, new sphere-shaped shells were created, with increased density and very powerful structural cohesion. During the

  5. Moon (Form-Origin)

    NASA Astrophysics Data System (ADS)

    Tsiapas, Elias

    2015-04-01

    When the Earth was formed, it was in a state of burning heat. As time went by, temperature on the planet's surface was falling due to radiation and heat transfer, and various components (crusts) began taking solid form at the Earth's poles. The formation of crusts took place at the Earth's poles, because the stirring of burning and fluid masses on the surface of the Earth was significantly slighter there than it was on the equator. Due to centrifugal force and Coriolis Effect, these solid masses headed towards the equator; those originating from the North Pole followed a south-western course, while those originating from the South Pole followed a north-western course and there they rotated from west to east at a lower speed than the underlying burning and liquid earth, because of their lower initial linear velocity, their solid state and inertia. Because inertia is proportional to mass, the initially larger solid body swept all new solid ones, incorporating them to its western side. The density of the new solid masses was higher, because the components on the surface would freeze and solidify first, before the underlying thicker components. As a result, the western side of the initial islet of solid rocks submerged, while the east side elevated. . As a result of the above, this initial islet began to spin in reverse, and after taking on the shape of a sphere, it formed the "heart" of the Moon. The Moon-sphere, rolling on the equator, would sink the solid rocks that continued to descend from the Earth's poles. The sinking rocks partially melted because of higher temperatures in the greater depths that the Moon descended to, while part of the rocks' mass bonded with the Moon and also served as a heat-insulating material, preventing the descended side of the sphere from melting. Combined with the Earth's liquid mass that covered its emerging eastern surface, new sphere-shaped shells were created, with increased density and very powerful structural cohesion. During the

  6. Moon (Form-Origin)

    NASA Astrophysics Data System (ADS)

    Tsiapas, Elias

    2016-04-01

    When the Earth was formed, it was in a state of burning heat. As time went by, temperature on the planet's surface was falling due to radiation and heat transfer, and various components (crusts) began taking solid form at the Earth's poles. The formation of crusts took place at the Earth's poles, because the stirring of burning and fluid masses on the surface of the Earth was significantly slighter there than it was on the equator. Due to centrifugal force and Coriolis Effect, these solid masses headed towards the equator; those originating from the North Pole followed a south-western course, while those originating from the South Pole followed a north-western course and there they rotated from west to east at a lower speed than the underlying burning and liquid earth, because of their lower initial linear velocity, their solid state and inertia. Because inertia is proportional to mass, the initially larger solid body swept all new solid ones, incorporating them to its western side. The density of the new solid masses was higher, because the components on the surface would freeze and solidify first, before the underlying thicker components. As a result, the western side of the initial islet of solid rocks submerged, while the east side elevated. . As a result of the above, this initial islet began to spin in reverse, and after taking on the shape of a sphere, it formed the "heart" of the Moon. The Moon-sphere, rolling on the equator, would sink the solid rocks that continued to descend from the Earth's poles. The sinking rocks partially melted because of higher temperatures in the greater depths that the Moon descended to, while part of the rocks' mass bonded with the Moon and also served as a heat-insulating material, preventing the descended side of the sphere from melting. Combined with the Earth's liquid mass that covered its emerging eastern surface, new sphere-shaped shells were created, with increased density and very powerful structural cohesion. During the

  7. Assessment to CCN impacts on stratocumulus cloud development by LES model simulations

    NASA Astrophysics Data System (ADS)

    Song, K.; Yum, S.; Park, S. K.

    2006-12-01

    Since stratocumulus clouds cover about 25 % of the entire global ocean, it is necessary to identify the potentially significant impact of these clouds on climate. Anthropogenic and natural aerosol serve as a source of CCN. Due to the increase of human activities anthropogenic aerosol distributions vary with time and place. Radiative properties of stratocumulus clouds formed on these anthropogenic CCN also vary since increased CCN increase the concentration of cloud droplets and induce changes in liquid water content resulting from feedbacks involving precipitation and entrainment. This study investigates the CCN impacts (3 cases: extreme continental, continental and maritime) on stratocumulus clouds development using the Cooperative Institute for Mesoscale Meteorological Studies (CIMMS) large eddy simulation (LES) model with size-resolving microphysics and attempts to understand how turbulence interacts with cloud microphysics. Initial extreme continental CCN spectrum is taken from the recent measurement on the west coast of the Korean Peninsula. Initial continental and maritime CCN spectra are selected from aircraft measurement over the Atlantic ocean. The cumulative CCN concentrations at 1 % supersaturation are 5292, 1023 and 163 cm-3 for extreme continental, continental and maritime, respectively. Preliminary results show that, cloud droplet number concentration was higher and mean diameter of cloud droplets, cloud liquid water content and drizzle liquid water content were smaller when CCN concentrations were higher. For maritime case, precipitation started after 75 minutes and lasted until the end of the run at 6 hours, while for continental case there was no drizzle reaching the surface for the whole 6 hours. Detailed feature of stratocumulus cloud evolution will be discussed at the meeting focusing on the decoupling processes of the stratus topped boundary layer and the water vapor sources at the surface in the daytime by the shortwave heating of the cloud

  8. How delusion is formed?

    PubMed

    Park, Jong Suk; Kang, Ung Gu

    2016-02-01

    Traditionally, delusions have been considered to be the products of misinterpretation and irrationality. However, some theorists have argued that delusions are normal or rational cognitive responses to abnormal experiences. That is, when a recently experienced peculiar event is more plausibly explained by an extraordinary hypothesis, confidence in the veracity of this extraordinary explanation is reinforced. As the number of such experiences, driven by the primary disease process in the perceptual domain, increases, this confidence builds and solidifies, forming a delusion. We tried to understand the formation of delusions using a simulation based on Bayesian inference. We found that (1) even if a delusional explanation is only marginally more plausible than a non-delusional one, the repetition of the same experience results in a firm belief in the delusion. (2) The same process explains the systematization of delusions. (3) If the perceived plausibility of the explanation is not consistent but varies over time, the development of a delusion is delayed. Additionally, this model may explain why delusions are not corrected by persuasion or rational explanation. This Bayesian inference perspective can be considered a way to understand delusions in terms of rational human heuristics. However, such experiences of "rationality" can lead to irrational conclusions, depending on the characteristics of the subject. PMID:26826642

  9. How desert varnish forms?

    NASA Astrophysics Data System (ADS)

    Perry, Randall S.; Kolb, Vera M.; Lynne, Bridget Y.; Sephton, Mark A.; Mcloughlin, Nicola; Engel, Michael H.; Olendzenski, Lorraine; Brasier, Martin; Staley, James T., Jr.

    2005-09-01

    Desert varnish is a black, manganese-rich rock coating that is widespread on Earth. The mechanism underlying its formation, however, has remained unresolved. We present here new data and an associated model for how desert varnish forms, which substantively challenges previously accepted models. We tested both inorganic processes (e.g. clays and oxides cementing coatings) and microbial methods of formation. Techniques used in this preliminary study include SEM-EDAX with backscatter, HRTEM of focused ion beam prepared (FIB) wafers and several other methods including XRPD, Raman spectroscopy, XPS and Tof-SIMS. The only hypothesis capable of explaining a high water content, the presence of organic compounds, an amorphous silica phase (opal-A) and lesser quantities of clays than previously reported, is a mechanism involving the mobilization and redistribution of silica. The discovery of silica in desert varnish suggests labile organics are preserved by interaction with condensing silicic acid. Organisms are not needed for desert varnish formation but Bacteria, Archaea, Eukarya, and other organic compounds are passively incorporated and preserved as organominerals. The rock coatings thus provide useful records of past environments on Earth and possibly other planets. Additionally this model also helps to explain the origin of key varnish and rock glaze features, including their hardness, the nature of the "glue" that binds heterogeneous components together, its layered botryoidal morphology, and its slow rate of formation.

  10. New education coalition formed

    NASA Astrophysics Data System (ADS)

    Watt Ireto, M. Frank

    The Coalition for Earth Science Education (CESE) was recently formed to promote Earth science education at all levels. Earth science is a diverse group of sciences and as a result, professional and academic organizations from the various areas, though united in their goal to stimulate student enthusiasm for the Earth sciences, have not had an effective way of reaching students or their precollege teachers. Over the past year, meetings sponsored by the National Academy of Science's Board on Earth Sciences and Resources and the National Science Foundation have paved the way for this coalition. Victor Mayer, Director of the Program for Leadership in Earth Systems Science (PLESE) project at the University of Ohio, has been the leader in initiating and promoting this effort for the last several years.The purpose of CESE is to promote communication among the member organizations and to coordinate projects in Earth science education. Individual organizations will continue to develop and run projects, but will be able to find out what types of projects others are working on or have completed through a coalition clearinghouse. The clearinghouse should aid organizations as they design projects and should afford opportunities for collaborative efforts. This will directly benefit teachers, who will be able to contact one source for information on the multitude of projects in the Earth and space sciences. The new coalition's steering committee is working on goals and guidelines, and will give a report at the next coalition meeting at the National Science Teachers Association annual convention in Boston.

  11. Diagnostic moléculaire d'helicobacter pylori par PCR chez les patients en consultation gastroentérologique au Centre Médical Saint Camille de Ouagadougou

    PubMed Central

    Werme, Karidia; Bisseye, Cyrille; Ouedraogo, Issiaka; Yonli, Albert Théophane; Ouermi, Djénèba; Djigma, Florencia; Moret, Rémy; Gnoula, Charlemagne; Nikiema, Jean-Baptiste; Simpore, Jacques

    2015-01-01

    Introduction L'infection par Helicobacter pylori constitue un problème de santé publique notamment dans les pays en développement. Elle entraine une gastrite pouvant évoluer vers des formes sévères d'ulcération et de transformation maligne. La présenté étude avait pour objectif de diagnostiquer H. pylori par des techniques sérologique et moléculaire au Burkina Faso. Méthodes L’étude prospective a été conduite de mars à juin 2012 sur 70 patients venus en consultation dans le service de gastroentérologie au Centre Médical Saint Camille. Le diagnostic de H. pylori a été réalisé par le test ELISA Immunocomb (ORGENICS Ltd, Yavne, Israël) et la PCR sur des biopsies gastriques prélevées sur les patients. Résultats Les pathologies gastroduodénales étaient plus fréquentes chez les patients de plus de 45 ans. Les prévalences de H. pylori étaient respectivement de 88,57% et de 91,43% par sérologie Immunocomb et par PCR. La différence entre les deux techniques n’était pas significative (P = 0,573). La performance de la PCR a été comparée à celle de la technique Immunocomb. Les résultats montrent une sensibilité et une spécificité de 92,2% et 50,0% pour la technique Immunocomb. Conclusion Le diagnostic de H. pylori par PCR est plus spécifique que le test sérologique Immunocomb et devrait être introduit dans le diagnostic de routine de cette bactérie pathogène au Burkina Faso. PMID:26327960

  12. Enquete sur les aspects toxicologiques de la phytotherapie utilisee par un herboriste à Fes, Maroc

    PubMed Central

    Zeggwagh, Ali Amine; Lahlou, Younes; Bousliman, Yassir

    2013-01-01

    Introduction Dans le but d'étudier l'aspect toxicologique des plantes médicinales utilisées en médecine traditionnelle, une étude ethnobotanique a été réalisée à la ville de Fès au centre du Maroc. Méthodes Ont été inclus dans l'étude tous les patients ayant bénéficié d'une prescription par l'herboriste de plantes à visée thérapeutique. La discussion de nos résultats s'est faite sur la base d'une revue de la littérature avec identification des principales plantes toxiques utilisées en phytothérapie au Maroc. L'approche bibliographique a permis de compléter les informations. Résultats L'âge moyen des patients traités par des plantes (38 femmes, 32 hommes) était de 35 ± 18 ans. L'enquête ethnobotanique à révélé que la majorité des plantes médicinales étaient utilisées contre les affections urinaires (21%), suivi des maladies de l'appareil digestif (19.6%) et des maladies rhumatologiques (18.2%). Le nombre de plantes prescrits par l'herboriste a été de 53 dont 5 sont potentiellement toxiques. L'identification taxonomique des plantes prescrites a recensé 30 familles dont les plus représentées sont les Lamiaceae (23.33%), les Apiaceae (13,33%) et les Asteraceae (10%). La prescription des plantes considérées comme toxiques a concerné 7,1% des consultants traités par les plantes médicinales. Aucune complication inhérente aux plantes prescrites n'a été déplorée. Conclusion Malgré les résultats encourageants de notre enquête sur le compte de la phytothérapie, la pratique de la phytothérapie est laissée à la vulgarisation et à l'oubli scientifique, législatif et universitaire. PMID:23734270

  13. Les tumeurs annexielles cutanées: étude anatomopathologique à propos de 96 cas

    PubMed Central

    El Ochi, Mohamed Réda; Boudhas, Adil; Allaoui, Mohammed; Rharrassi, Issam; Chahdi, Hafsa; Bouzidi, Abderrahman Al; Oukabli, Mohammed

    2015-01-01

    Les tumeurs annexielles cutanées sont des tumeurs primitives cutanées à la fois rares et hétérogènes. Elles sont le plus souvent bénignes et rarement malignes. Elles sont dominées du point de vu morphologique par leur polymorphisme lésionnel. Le but de cette étude est de relever le profil épidémiologique et les différents aspects anatomopathologiques de ce groupe de tumeurs dans une cohorte de population marocaine et de les comparer avec les données de la littérature. Il s'agit d'une étude rétrospective de 96 cas de tumeurs annexielles cutanées colligées au service d'anatomie et de cytologie pathologique de l'Hôpital Militaire d'Instruction Mohammed V de rabat durant une période de 6 ans, de Janvier 2009 à Décembre 2014. Le pic de fréquence est situé entre 31 et 40 ans. L’âge moyen est de 36 ans avec une prédominance masculine (63,5%). Le siège de prédilection est la région de la tête et cou (47,9%). Les tumeurs bénignes (97,9%) sont plus fréquentes que les tumeurs malignes. La différenciation est folliculaire dans 51% des cas, eccrine/apocrine dans 44,8% des cas et sébacée dans 4,2% des cas. Le type histologique le plus fréquent est le pilomatrixome (33,4%) suivi par l'hidradénome (12,5%) et le spiradénome eccrine (11,5%). Les tumeurs annexielles cutanées sont rares et très variées. Le profil épidémiologique et les aspects anatomopathologiques qui ressortent sont globalement superposables à ceux rapportés dans la littérature. Elles sont majoritairement bénignes, à prédominance masculine et dominées par le pilomatrixome et l'hidradénome nodulaire. Les tumeurs malignes sont rares, agressives et surviennent à un âge plus avancé. PMID:26185579

  14. Les bisphosphonates dans le traitement de l’ostéoporose

    PubMed Central

    Brown, Jacques P.; Morin, Suzanne; Leslie, William; Papaioannou, Alexandra; Cheung, Angela M.; Davison, Kenneth S.; Goltzman, David; Hanley, David Arthur; Hodsman, Anthony; Josse, Robert; Jovaisas, Algis; Juby, Angela; Kaiser, Stephanie; Karaplis, Andrew; Kendler, David; Khan, Aliya; Ngui, Daniel; Olszynski, Wojciech; Ste-Marie, Louis-Georges; Adachi, Jonathan

    2014-01-01

    Résumé Objectif Exposer l’efficacité et les risques du traitement par les bisphosphonates dans la prise en charge de l’ostéoporose et décrire les patients qui seraient de bons candidats aux congés thérapeutiques. Qualité des données Une recherche dans MEDLINE (PubMed, jusqu’au 31 décembre 2012) a permis de relever les publications pertinentes pour l’inclusion. La plupart des données probantes citées sont de niveau II (tirées d’essais non randomisés, de cohorte et d’autres essais comparatifs). Message principal L’efficacité des bisphosphonates de premier recours homologués pour la prévention des fractures a été éprouvée dans le cadre d’essais cliniques randomisés et contrôlés. Cependant, l’usage clinique répandu et prolongé des bisphosphonates a donné lieu à des rapports de manifestations indésirables rares, mais graves. L’ostéonécrose maxillaire et les fractures atypiques sous-trochantériennes ou diaphysaires du fémur seraient liées à l’emploi des bisphosphonates dans le traitement de l’ostéoporose, mais ces manifestations sont extrêmement rares et lorsqu’elles surviennent, elles sont accompagnées d’autres comorbidités ou de l’emploi concomitant de médicaments. Les congés thérapeutiques ne peuvent être envisagés que chez les patients à faible risque et dans un groupe restreint de patients dont le risque de fracture est modéré après un traitement de 3 à 5 ans. Conclusion Lorsque les bisphosphonates sont prescrits à des patients dont le risque de fracture est élevé, leur effet de prévention des fractures l’emporte de loin sur leurs torts potentiels. Chez les patients qui prennent des bisphosphonates depuis 3 à 5 ans, il faut réévaluer le besoin de poursuivre le traitement.

  15. Watching How Planets Form

    NASA Astrophysics Data System (ADS)

    2006-09-01

    Anatomy of a Planet-Forming Disc around a Star More Massive than the Sun With the VISIR instrument on ESO's Very Large Telescope, astronomers have mapped the disc around a star more massive than the Sun. The very extended and flared disc most likely contains enough gas and dust to spawn planets. It appears as a precursor of debris discs such as the one around Vega-like stars and thus provides the rare opportunity to witness the conditions prevailing prior to or during planet formation. "Planets form in massive, gaseous and dusty proto-planetary discs that surround nascent stars. This process must be rather ubiquitous as more than 200 planets have now been found around stars other than the Sun," said Pierre-Olivier Lagage, from CEA Saclay (France) and leader of the team that carried out the observations. "However, very little is known about these discs, especially those around stars more massive than the Sun. Such stars are much more luminous and could have a large influence on their disc, possibly quickly destroying the inner part." The astronomers used the VISIR instrument [1] on ESO's Very Large Telescope to map in the infrared the disc surrounding the young star HD 97048. With an age of a few million years [2], HD 97048 belongs to the Chameleon I dark cloud, a stellar nursery 600 light-years away. The star is 40 times more luminous than our Sun and is 2.5 times as massive. The astronomers could only have achieved such a detailed view due to the high angular resolution offered by an 8-metre size telescope in the infrared, reaching a resolution of 0.33 arcsecond. They discovered a very large disc, at least 12 times more extended than the orbit of the farthest planet in the Solar System, Neptune. The observations suggest the disc to be flared. "This is the first time such a structure, predicted by some theoretical models, is imaged around a massive star," said Lagage. ESO PR Photo 36/06 ESO PR Photo 36/06 A Flared Proto-Planetary Disc Such a geometry can only be

  16. Waste form product characteristics

    SciTech Connect

    Taylor, L.L.; Shikashio, R.

    1995-01-01

    The Department of Energy has operated nuclear facilities at the Idaho National Engineering Laboratory (INEL) to support national interests for several decades. Since 1953, it has supported the development of technologies for the storage and reprocessing of spent nuclear fuels (SNF) and the resultant wastes. However, the 1992 decision to discontinue reprocessing of SNF has left nearly 768 MT of SNF in storage at the INEL with unspecified plans for future dispositioning. Past reprocessing of these fuels for uranium and other resource recovery has resulted in the production of 3800 M{sup 3} calcine and a total inventory of 7600 M{sup 3} of radioactive liquids (1900 M{sup 3} destined for immediate calcination and the remaining sodium-bearing waste requiring further treatment before calcination). These issues, along with increased environmental compliance within DOE and its contractors, mandate operation of current and future facilities in an environmentally responsible manner. This will require satisfactory resolution of spent fuel and waste disposal issues resulting from the past activities. A national policy which identifies requirements for the disposal of SNF and high level wastes (HLW) has been established by the Nuclear Waste Policy Act (NWPA) Sec.8,(b) para(3)) [1982]. The materials have to be conditioned or treated, then packaged for disposal while meeting US Environmental Protection Agency (EPA) and Nuclear Regulatory Commission (NRC) regulations. The spent fuel and HLW located at the INEL will have to be put into a form and package that meets these regulatory criteria. The emphasis of Idaho Chemical Processing Plant (ICPP) future operations has shifted toward investigating, testing, and selecting technologies to prepare current and future spent fuels and waste for final disposal. This preparation for disposal may include mechanical, physical and/or chemical processes, and may differ for each of the various fuels and wastes.

  17. Extended LES-PaSR model for simulation of turbulent combustion

    NASA Astrophysics Data System (ADS)

    Sabelnikov, V.; Fureby, C.

    2013-03-01

    In this work, a novel model for Large Eddy Simulations (LES) of high Reynolds moderate Damköhler number turbulent flames is proposed. The development is motivated by the need for more accurate and versatile LES combustion models for engineering applications such as jet engines. The model is based on the finite rate chemistry approach in which the filtered species equations of a reduced reaction mechanism are solved prior to closure modeling. The modeling of the filtered reaction rate provides the challenge: as most of the chemical activity, and thus also most of the exothermicity occurs on the subgrid scales, this model needs to be based on the properties of fine-scale turbulence and mixing and Arrhenius chemistry. The model developed here makes use of the similarities with the mathematical treatment of multiphase flows together with the knowledge of fine-scale turbulence and chemistry obtained by Direct Numerical Simulation (DNS) and experiments. In the model developed, equations are proposed for the fine-structure composition and volume fraction that are solved together with the LES equations for the resolved scales. If subgrid convection can be neglected, the proposed model simplifies to the Partially Stirred Reactor (PaSR) model. To validate the proposed LES model, comparisons with experimental data and other LES results are made, using other turbulence chemistry interaction models, for a lean premixed bluff-body stabilized flame.

  18. Comparison of LES and DNS simulations for the late stratified wake

    NASA Astrophysics Data System (ADS)

    Bogucki, Darek J.; Yang, X.; Radhakrishnan, S.; Domaradzki, Julian A.

    2001-11-01

    We have carried out fully three-dimensional Large Eddy Simulations of stratified late non-zero momentum wake using the sub-grid scale estimation model and the truncated Navier-Stokes dynamics. The LES runs were performed for a wide range of Froude numbers between Fr=10 and Fr= ∞ with the Reynolds numbers up to 10^5. The runs were initiated with a mean flow with cylindrical Gaussian streamwise non-zero momentum and with a background flow and temperature possessing mid-scale fluctuations with the k^(-5/3) spectrum and a rapid roll-off at the smallest scales. LES were validated by comparing cases with analogous DNS runs performed for the same values of flow parameters. The subgrid-scale quantities from DNS and LES as well as the time-dependent spectra of the velocity and the temperature fields are examined. Physical processes such as internal wave and vortex generations and propagation in both LES and DNS are also investigated. The usefulness of LES to stratified future wake simulations is discussed.

  19. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    SciTech Connect

    Steve Cannon; Baifang Zuo; Virgil Adumitroaie; Keith McDaniel; Cliff Smith

    2002-01-01

    Further development of a combustion Large Eddy Simulation (LES) code for the design of advanced gaseous combustion systems is described in this fifth quarterly report. CFD Research Corporation (CFDRC) is developing the LES module within the parallel, unstructured solver included in the commercial CFD-ACE+ software. In this quarter, in-situ adaptive tabulation (ISAT) for efficient chemical rate storage and retrieval was further tested in the LES code. The use of multiple trees and periodic tree dumping was investigated. Implementation of the Linear Eddy Model (LEM) for subgrid chemistry was finished for serial applications. Validation of the model on a backstep reacting case was performed. Initial calculations of the SimVal experiment were performed for various barrel lengths, equivalence ratio, combustor shapes, and turbulence models. The effects of these variables on combustion instability was studied. Georgia Tech continues the effort to parameterize the LEM over composition space so that a neural net can be used efficiently in the combustion LES code. Next quarter, the 2nd consortium meeting will be held at CFDRC. LES software development and testing will continue. Alpha testing of the code will be performed on cases of interest to the industrial consortium. Optimization of subgrid models will be pursued, particularly with the ISAT approach. Also next quarter, the demonstration of the neural net approach, for chemical kinetics speed-up in CFD-ACE+, should be accomplished.

  20. Towards the understanding of cyclic variability in a spark ignited engine using multi-cycle LES

    SciTech Connect

    Vermorel, O.; Richard, S.; Colin, O.; Angelberger, C.; Benkenida, A.; Veynante, D.

    2009-08-15

    Large-Eddy Simulation (LES) has been used to analyze the occurrence and the causes of cycle-to-cycle combustion variations in a spark ignited four-valve single cylinder engine fueled with a homogeneous propane-air mixture. The combustion modeling combines an Eulerian model derived from the RANS AKTIM model that mimics the spark ignition and the Extended Coherent Flame Model (ECFM-LES) that describes the flame propagation. The motion of piston and valves is accounted for using an Arbitrary Eulerian Lagrangian (ALE) technique with body-fitted meshes. The computation covers nine consecutive complete four-stroke cycles following an initialization cycle. The obtained LES results are compared with experimental measurements. Although the number of computed cycles is fairly low, LES is shown to be able to reproduce both quantitatively and qualitatively the cyclic variability observed experimentally. The investigation of the possible causes of variability illustrates the unprecedented possibility LES offers for understanding cycle-to-cycle variations. (author)

  1. DNS/LES Simulations of Separated Flows at High Reynolds Numbers

    NASA Technical Reports Server (NTRS)

    Balakumar, P.

    2015-01-01

    Direct numerical simulations (DNS) and large-eddy simulations (LES) simulations of flow through a periodic channel with a constriction are performed using the dynamic Smagorinsky model at two Reynolds numbers of 2800 and 10595. The LES equations are solved using higher order compact schemes. DNS are performed for the lower Reynolds number case using a fine grid and the data are used to validate the LES results obtained with a coarse and a medium size grid. LES simulations are also performed for the higher Reynolds number case using a coarse and a medium size grid. The results are compared with an existing reference data set. The DNS and LES results agreed well with the reference data. Reynolds stresses, sub-grid eddy viscosity, and the budgets for the turbulent kinetic energy are also presented. It is found that the turbulent fluctuations in the normal and spanwise directions have the same magnitude. The turbulent kinetic energy budget shows that the production peaks near the separation point region and the production to dissipation ratio is very high on the order of five in this region. It is also observed that the production is balanced by the advection, diffusion, and dissipation in the shear layer region. The dominant term is the turbulent diffusion that is about two times the molecular dissipation.

  2. Consommation de lait et production de mucus chez les enfants asthmatiques

    PubMed Central

    Thiara, Gurkaran; Goldman, Ran D.

    2012-01-01

    Résumé Question De nombreux parents qui ont des enfants asthmatiques hésitent de plus en plus à leur donner du lait parce qu’ils croient que cela aggrave leur asthme en augmentant la production de mucus. Sachant que le lait fait partie d’un régime alimentaire sain qui favorise la croissance et l’apport en calcium, est-il avisé d’exclure le lait de l’alimentation? Réponse Depuis le 12e siècle, on proscrit le lait chez les patients atteints d’asthme. Ceci étant dit, jusqu’à maintenant, aucune étude n’a pu établir de lien définitif qui puisse appuyer cette recommandation. Puisqu’il faudrait des preuves plus concluantes pour déterminer l’effet qu’a la consommation de lait chez les enfants asthmatiques et qu’on doit mieux comprendre les mécanismes de production de mucus, on ne devrait pas exclure le lait ou en consommer moins. Santé Canada recommande 2 portions de lait (0,5 l) par jour pour les enfants de 2 à 8 ans et 3 à 4 portions de lait par jour (0,75 à 1 l) pour les enfants de 9 à 13 ans pour un développement et une santé optimale.

  3. Midazolam intranasal pour arrêter les convulsions en contexte extra-hospitalier

    PubMed Central

    Zelcer, Michal; Goldman, Ran D.

    2016-01-01

    Résumé Question Il arrive parfois que des parents se présentent à ma clinique après que leur enfant eut eu une crise convulsive et qu’une deuxième crise ait lieu à la clinique. En attendant le transfert à l’hôpital, existe-t-il des moyens de mettre fin aux convulsions sans devoir obtenir l’accès intraveineux à la clinique? Réponse Le diazépam par voie intraveineuse est depuis de nombreuses années un traitement de première intention pour mettre fin aux crises convulsives chez les enfants. Il est aussi possible d’administrer le médicament par les voies intramusculaire, rectale ou buccale, mais ces voies d’administration s’accompagnent de plusieurs inconvénients. D’autres données probantes laissent croire que la voie intranasale est rapide et efficace chez les enfants, et le midazolam continue de se montrer prometteur pour mettre fin aux crises convulsives. Doté d’un bon profil d’innocuité, le midazolam intranasal s’utilise en clinique et en contexte préhospitalier pour arrêter les convulsions chez les enfants.

  4. Optimisation des proprietes fonctionnelles des alliages a memoire de forme suite a l'application de traitements thermomecaniques

    NASA Astrophysics Data System (ADS)

    Demers, Vincent

    L'objectif de ce projet est de determiner les conditions de laminage et la temperature de traitement thermique maximisant les proprietes fonctionnelles de l'alliage a memoire de forme Ti-Ni. Les specimens sont caracterises par des mesures de calorimetrie, de microscopie optique, de gene ration de contrainte, de deformation recuperable et des essais mecaniques. Pour un cycle unique, l'utilisation d'un taux d'ecrouissage e=1.5 obtenu avec l'application d'une force de tension FT = 0.1sigma y et d'une huile minerale resulte en un echantillon droit, sans microfissure et qui apres un recuit a 400°C, produit un materiau nanostructure manifestant des proprietes fonctionnelles deux fois plus grandes que le meme materiau ayant une structure polygonisee. Pour des cycles repetes, les memes conditions de laminage sont valables mais le niveau de deformation optimal est situe entre e=0.75-2, et depend particulierement du mode de sollicitation, du niveau de stabilisation et du nombre de cycles a la rupture requis par l'application.

  5. Doing Focus-on-Form.

    ERIC Educational Resources Information Center

    Ellis, Rod; Basturkmen, Helen; Loewen, Shawn

    2002-01-01

    Considers the rationale for using a focus on form approach to teaching form as opposed to the more traditional focus on forms approach where linguistic features are treated sequentially. Describes methodological options for attending to form in communication. (Author/VWL)

  6. Science Grade 7, Long Form.

    ERIC Educational Resources Information Center

    New York City Board of Education, Brooklyn, NY. Bureau of Curriculum Development.

    The Grade 7 Science course of study was prepared in two parallel forms. A short form designed for students who had achieved a high measure of success in previous science courses; the long form for those who have not been able to maintain the pace. Both forms contain similar content. The Grade 7 guide is the first in a three-year sequence for…

  7. Révision systématique des effets de la fréquence des repas en famille sur les résultats psychosociaux chez les jeunes

    PubMed Central

    Harrison, Megan E.; Norris, Mark L.; Obeid, Nicole; Fu, Maeghan; Weinstangel, Hannah; Sampson, Margaret

    2015-01-01

    Résumé Objectif Effectuer une révision systématique des effets de repas en famille fréquents sur les résultats psychosociaux chez les enfants et les adolescents et examiner s’il existe des différences dans les résultats selon le sexe. Sources des données Des études ont été cernées à la suite d’une recherche dans MEDLINE (de 1948 à la dernière semaine de juin 2011) et dans PsycINFO (de 1806 à la première semaine de juillet 2011) à l’aide de l’interface Ovide. Les expressions et mots clés MeSH utilisés seuls ou en combinaisons étaient les suivants : family, meal, food intake, nutrition, diets, body weight, adolescent attitudes, eating behaviour, feeding behaviour et eating disorders. Les bibliographies des articles jugés pertinents ont aussi été passées en revus. Sélection des études La recherche initiale a produit 1783 articles. Pour être incluses dans l’analyse, les études devaient répondre aux critères suivants : être publiées en anglais dans une revue révisée par des pairs; porter sur des enfants ou des adolescents; traiter de l’influence des repas en famille sur les paramètres psychosociaux (p. ex. consommation de drogues et autres substances, troubles de l’alimentation, dépression) chez les enfants ou les adolescents; avoir une conception d’étude appropriée, notamment des méthodes statistiques acceptables pour l’analyse des paramètres. Quatorze articles satisfaisaient aux critères d’inclusion. Deux examinateurs indépendants ont étudié et analysé les articles. Synthèse Dans l’ensemble, les résultats font valoir que la fréquence des repas en famille est inversement proportionnelle aux troubles de l’alimentation, à la consommation d’alcool et de drogues, aux comportements violents, aux sentiments de dépression ou aux pensées suicidaires chez les adolescents. Il existe une relation positive entre de fréquents repas en famille, une bonne estime de soi et la réussite scolaire. Les

  8. Compressible and low Mach number LES of a swirl experimental burner

    NASA Astrophysics Data System (ADS)

    Barré, David; Kraushaar, Matthias; Staffelbach, Gabriel; Moureau, Vincent; Gicquel, Laurent Y. M.

    2013-01-01

    Large-Eddy Simulations (LES) of a swirl experimental burner are performed using a compressible and a low Mach number solver. The investigations are focused on the modeling strategies in LES aimed at validating the flow predictions and principally the associated pressure losses. Accurate prediction of pressure drop through complex geometries, such as those typically encountered in industrial swirlers, is indeed of paramount importance to design and optimize the engine efficiency. LES is here probed and tested to identify the model parameters affecting pressure losses: grid resolution, wall treatment or solver accuracy, with the aim of highlighting the requirements for accurate pressure drop predictions. Results show that for the high Reynolds number flow considered, the wall law model provides the best predictions and minimizes the error compared to experimental findings with a reasonable overall CPU cost.

  9. L’hypertension chez les diabétiques de type 2

    PubMed Central

    Campbell, Norm R.C.; Gilbert, Richard E.; Leiter, Lawrence A.; Larochelle, Pierre; Tobe, Sheldon; Chockalingam, Arun; Ward, Richard; Morris, Dorothy; Tsuyuki, Ross T.; Harris, Stewart B.

    2011-01-01

    Résumé Objectif Résumer les données qui rappellent la nécessité d’améliorer le traitement pharmacologique de l’hypertension chez les diabétiques de type 2 et de fournir des conseils d’experts sur la façon d’améliorer le traitement de la tension artérielle (TA) en contexte de soins primaires. Source de l’information À partir d’études recueillies grâce à une revue systématique de la littérature sur l’hypertension et le diabète, on a élaboré et révisé des recommandations et on les a soumises au vote d’un groupe d’experts du Programme éducatif canadien sur l’hypertension et de l’Association canadienne du diabète; on a également tenu compte de l’opinion avisée des auteurs sur le traitement pharmacologique optimal. Principal message La pathogénie de l’hypertension chez les diabétiques est complexe et fait intervenir plusieurs facteurs biologiques et environnementaux, ainsi qu’une prédisposition génétique; par conséquent, l’hypertension du diabétique présente un plus grand danger de problèmes et de complications. Les diabétiques qui n’obtiennent pas un contrôle de la TA (c’est-à-dire une valeur cible de moins de 130/80 mm Hg) ont un taux de mortalité et de morbidité plus élevé. De vastes essais cliniques randomisés et des méta-analyses d’essais cliniques randomisés ont montré qu’à elle seule, une réduction pharmacologique de la TA est la façon la plus efficace de réduire les taux de décès et d’incapacité chez le diabétique, notamment le risque de problèmes cardiovasculaires. Pour que le traitement soit efficace, il est souvent nécessaire d’utiliser deux médicaments ou plus (diurétiques, inhibiteurs de l’enzyme de conversion de l’angiotensine, β–bloqueurs, bloqueurs des récepteurs de l’angiotensine, bloqueurs des canaux calciques, spironolactone, etc.), en particulier chez les patients dont la TA est difficile à contrôler. Toutefois, les coûts de santé engendr

  10. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    SciTech Connect

    Steven Cannon; Baifang Zuo; Virgil Adumitroaie; Keith McDaniel; Clifford Smith

    2002-04-30

    Further development of a combustion Large Eddy Simulation (LES) code for the design of advanced gaseous combustion systems is described in this sixth quarterly report. CFD Research Corporation (CFDRC) is developing the LES module within the parallel, unstructured solver included in the commercial CFD-ACE+ software. In this quarter, in-situ adaptive tabulation (ISAT) for efficient chemical rate storage and retrieval was implemented and tested within the Linear Eddy Model (LEM). ISAT type 3 is being tested so that extrapolation can be performed and further improve the retrieval rate. Further testing of the LEM for subgrid chemistry was performed for parallel applications and for multi-step chemistry. Validation of the software on backstep and bluff-body reacting cases were performed. Initial calculations of the SimVal experiment at Georgia Tech using their LES code were performed. Georgia Tech continues the effort to parameterize the LEM over composition space so that a neural net can be used efficiently in the combustion LES code. A new and improved Artificial Neural Network (ANN), with log-transformed output, for the 1-step chemistry was implemented in CFDRC's LES code and gave reasonable results. This quarter, the 2nd consortium meeting was held at CFDRC. Next quarter, LES software development and testing will continue. Alpha testing of the code will continue to be performed on cases of interest to the industrial consortium. Optimization of subgrid models will be pursued, particularly with the ISAT approach. Also next quarter, the demonstration of the neural net approach, for multi-step chemical kinetics speed-up in CFD-ACE+, will be accomplished.

  11. Etude morphométrique de l'oreille externe chez les jeunes adultes

    PubMed Central

    Nyemb, Philippe Manyacka Ma; Sankale, Anne-Aurore; Ndiaye, Lamine; NDiaye, Aïnina; Gaye, Magaye

    2014-01-01

    Introduction Connaitre les dimensions normales de l'oreille externe constitue un pré-requis en chirurgie. Le but de ce travail est de déterminer les valeurs moyennes des différentes mesures morphométriques des oreilles gauches et droites dans notre population d’étude. Méthodes Notre groupe d’étude était constitué de 100 sujets adultes jeunes (50 femmes et 50 hommes) âgés de 18 à 25 ans, et exempts de traumatismes ou d'anomalies congénitale de l'oreille externe. Les différentes mesures répertoriées étaient représentées par: la hauteur totale de l'oreille, la largeur totale de l'oreille, la hauteur lobulaire, la largeur lobulaire, la distance tragus - anti-hélix, la distance tragus - hélix, ainsi que la projection de l'oreille. Résultats L’âge moyen de notre population d’étude était de 22 ans. La hauteur totale de l'oreille était respectivement de 61,6 et 60,3 mm chez les sujets de sexe masculin et féminin. La largeur totale retrouvée était respectivement de 32,5 et 30,8 mm. Pour toutes les distances mesurées, nous retrouvions des différences entre hommes et femmes, ainsi que d'un coté à l'autre. Conclusion Pour le clinicien, il est important de prendre en compte les mesures morphométriques de l'oreille externe non seulement dans un but diagnostic, mais également pour reproduire lors de sa reconstruction une oreille anatomiquement correcte. PMID:25932068

  12. Modelisations des effets de surface sur les jets horizontaux subsoniques d'hydrogene et de methane

    NASA Astrophysics Data System (ADS)

    Gomez, Luis Fernando

    Le developpement des codes et de normes bases sur une methodologie scientifique requiert la capacite de predire l'etendue inflammable de deversements gazeux d'hydrogene sous differentes conditions. Des etudes anterieures ont deja etabli des modeles bases sur les lois de conservation de la mecanique des fluides basees sur des correlations experimentales qui permettent de predire la decroissance de la concentration et de la vitesse d'un gaz le long de l'axe d'un jet libre vertical. Cette etude s'interesse aux effets de proximite a une surface horizontale parallele sur un jet turbulent. Nous nous interessons a son impact sur l'etendue du champ de la concentration et sur l'enveloppe inflammable en particulier. Cette etude est comparative : l'hydrogene est compare au methane. Ceci permet de degager l'influence des effets de difference de la densite sur le comportement du jet, et de comparer le comportement de l'hydrogene aux correlations experimentales, qui ont ete essentiellement etablies pour le methane. Un modele decrivant l'evolution spatio-temporelle du champ de concentration du gaz dilue est propose, base sur la mecanique des fluides computationnelle. Cette approche permet de varier systematiquement les conditions aux frontieres (proximite du jet a la surface, par exemple) et de connaitre en detail les proprietes de l'ecoulement. Le modele est implemente dans le code de simulations par volumes finis de FLUENT. Les resultats des simulations sont compares avec les lois de similitudes decoulant de la theorie des jets d'ecoulements turbulents libres ainsi qu'avec les resultats experimentaux disponibles. L'effet de la difference des masses molaires des constituantes du jet et des constituantes du milieu de dispersion est egalement etudie dans le contexte du comportement d'echelle de la region developpee du jet.

  13. LES, DNS and RANS for the analysis of high-speed turbulent reacting flows

    NASA Technical Reports Server (NTRS)

    Adumitroaie, V.; Colucci, P. J.; Taulbee, D. B.; Givi, P.

    1995-01-01

    The purpose of this research is to continue our efforts in advancing the state of knowledge in large eddy simulation (LES), direct numerical simulation (DNS), and Reynolds averaged Navier Stokes (RANS) methods for the computational analysis of high-speed reacting turbulent flows. In the second phase of this work, covering the period 1 Aug. 1994 - 31 Jul. 1995, we have focused our efforts on two programs: (1) developments of explicit algebraic moment closures for statistical descriptions of compressible reacting flows and (2) development of Monte Carlo numerical methods for LES of chemically reacting flows.

  14. STS-65 Commander Cabana dons LES equipment prior to WETF bailout exercise

    NASA Technical Reports Server (NTRS)

    1994-01-01

    STS-65 Commander Robert D. Cabana, suited in his launch and entry suit (LES), is assisted by Lockheed's John A. Hopkins with LES safety gear prior to a launch emergency egress (bailout) training session at the Johnson Space Center's (JSC's) Weightless Environment Training Facility (WETF) Bldg 29. Cabana was joined by five other NASA astronauts and a Japanese payload specialist for the training session. The crew will spend approximately two weeks aboard the Space Shuttle Columbia, Orbiter Vehicle (OV) 102, later this year in support of the second International Microgravity Laboratory 2 (IML-2) mission.

  15. Integrated RANS-LES Computations of Turbomachinery Components: Generic Compressor/Diffuser

    NASA Technical Reports Server (NTRS)

    Schlueter, J. U.; Wu, X.; Kim, S.; Alonso, J. J.; Pitsch, H.

    2003-01-01

    The goal of the current study is to apply the coupled RANS-LES approach to a compressor-diffuser geometry of a gas turbine. This flow configuration is important, since the outflow of the compressor alters the flow field in the subsequent diffuser. A detailed knowledge of the flow field in this section allows to optimize the difuser design in order to to achieve a decrease of pressure loss. Here, the NASA stage 35 compressor is coupled with a generic diffuser in order to assess the integrated RANS-LES approach.

  16. On the simulation of trailing edge noise with a hybrid LES/APE method

    NASA Astrophysics Data System (ADS)

    Ewert, R.; Schröder, W.

    2004-02-01

    A hybrid method is applied to predict trailing edge noise based on a large eddy simulation (LES) of the compressible flow problem and acoustic perturbation equations (APE) for the time-dependent simulation of the acoustic field. The acoustic simulation in general considers the mean flow convection and refraction effects such that the computational domain of the flow simulation has to comprise only the significant acoustic source region. Using a modified rescaling method for the prediction of the unsteady turbulent inflow boundary layer, the LES just resolves the flow field in the immediate vicinity of the trailing edge. The linearized APE completely prevent the unbounded growth of hydrodynamic instabilities in critical mean flows.

  17. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    SciTech Connect

    Clifford Smith

    2003-09-01

    Application and testing of the new combustion Large Eddy Simulation (LES) code for the design of advanced gaseous combustion systems is described in this 12th quarterly report. In this quarter, continued validation and testing of the combustion LES code was performed for the DOE-SimVal combustor. Also, beta testing by six consortium members was performed for various burner and combustor configurations. A list of suggested code improvements by the beta testers was itemized. Work will continue in FY04. A conditional modification to the contract will be granted. The additional work will focus on modeling/analyzing the SimVal experiments.

  18. Confronting multi-year idealized LES with measurements at a mid-latitude meteorological site

    NASA Astrophysics Data System (ADS)

    Schemann, V.; Neggers, R.; Wegener, C.

    2015-12-01

    Long-term Large-Eddy Simulation (LES) at permanent meteorological sites is increasingly being used for the evaluation and improvement of parameterizations of fast boundary-layer physics for weather and climate models. Typically, idealized LES are generated that represent fine-scale downscalings of a large-scale model state at locations of interest, resolved at temporal and spatial resolutions at which turbulence and boundary layer clouds can be expected to be resolved. The setup relies on prescribed large-scale forings in combination with continuous nudging, at a time-scale large enough to allow the resolved fast physics to have enough freedom to establish their own, unique state. This study critically assesses the representativeness of such long-term LES, and asks to what degree the continuous nudging affects the budgets of thermodynamic state variables. To this purpose long-term, multi-year LES is confronted with relevant observations at a European midlatitude continental site. The large-scale advective forcings and surface properties used to drive the LES are derived from analyses of the Integrated Forecasting System (IFS) of the European Centre for Medium-Range Weather Forecasts (ECMWF). Evaluated aspects of the boundary layer include near-surface meteorology, vertical structure, and bulk properties including clouds. The evaluation focuses on the diurnal cycle, with the oservational datasets derived from state-of-the-art instrumentation at the Juelich Observatory for Cloud Evolution (JOYCE) in Germany. Conditional sampling is used to highlight results for regimes of interest, including the clear convective and shallow cumulus topped boundary layer. We find that the LES is able to reproduce the observed amplitude and time-variation of key boundary layer properties, including clouds. Budget studies of the thermodynamic state variables reveal that a rough balance exists between the prescribed larger-scale advection and the turbulence/convection as resolved by the

  19. Douleurs induites par les soins: la réalité au Centre Hospitalier Universitaire de Befelatanana Antananarivo, Madagascar

    PubMed Central

    Mahavivola, Ernestho-Ghoud Indretsy; Olivah, Razanaparany Miarisoa Mireille; Mihary, Dodo; Hendriniaina, Rakotoharivelo; Lalao, Randriamboavonjy Rado; Henintsoa, Rakotonirainy Oliva; Fahafahantsoa, Rapelanoro Rabenja

    2014-01-01

    La douleur induite par les soins correspond à la douleur survenant lors des actes à visé diagnostique et/ou thérapeutique. A notre connaissance, nous n'avons pas encore des données disponibles pour les douleurs induites par les soins à l'Hôpital de Befelatanana. Nos objectifs étaient de décrire le profil épidémiologique de la douleur induite par les soins, d'identifier les principaux facteurs influençant sur l'intensité de la douleur et leurs retentissements chez les patients. Il s'agissait d'une étude rétrospective, transversale type un jour donné menée dans les douze services de Médecines au Centre Hospitalier Universitaire de Befelatanana en Novembre 2013. Cent deux patients ont été retenus dans l’étude et trois cent vingt trois actes douloureux étaient enregistrés. La fréquence de la douleur induite par les soins était de 69,86%. Le genre féminin prédominait dans 52% des cas (n = 53) avec un sex-ratio à 0,92. L’âge moyen était de 46 ans. Les ponctions vasculaires étaient l'acte prédominant dans 49,54% (n = 109) des cas. Les infirmiers réalisaient les soins dans 47,05% (n = 48) des cas. L'information verbale était la mesure préventive utilisée dans 57,84% des cas (n = 59). Le transport par marche à pied et au dos représentait 16,67% des cas (n = 17). Les patients naïfs des gestes étaient plus anxieux. Ces patients gardaient de mauvais souvenir dans 64,71% des cas (n = 66). La fréquence de douleur induite par les soins était trop élevée. Un effort important est nécessaire pour réduire la douleur induite par les soins PMID:25932071

  20. Le transfert de connaissances entre les mathematiques et les sciences. Une etude exploratoire aupres d'eleves de 4e secondaire

    NASA Astrophysics Data System (ADS)

    Samson, Ghislain

    2003-06-01

    Au moment ou dans plusieurs pays on travaille a refondre les programmes d'etudes, tant au primaire qu'au secondaire, l'interet pour le transfert renait. Un des concepts fondamentaux en apprentissage consiste en l'habilete a reutiliser de facon consciente et efficace un acquis d'une situation a une autre situation. Cette recherche emane de preoccupations professionnelles au moment ou le chercheur etait enseignant au secondaire. Au cours de ces annees, il lui a ete possible de constater que plusieurs eleves percevaient difficilement les liens presents entre les disciplines mathematiques et scientifiques. Des travaux en psychologie cognitive et plus particulierement selon une perspective du traitement de l'information ont servi de cadre de reference pour evaluer et analyser les capacites de transfert aupres d'eleves de 4e secondaire. Ce cadre de reference permet de formuler le principal objectif qui est de mieux comprendre le processus de transfert chez des eleves en situation de resolution de problemes scientifiques. Cette these s'interesse donc au transfert en tant que phenomene important du processus d'apprentissage au sens de l'integration. La methode de recherche choisie, de nature qualitative, est principalement axee sur l'evaluation de la capacite a transferer des connaissances lors d'une epreuve et d'un entretien. Pour evaluer ce potentiel de transfert, nous avons elabore deux outils: une epreuve en mathematiques et en sciences et un guide d'entretien. Pour la passation de l'epreuve, le chercheur a pu compter sur la collaboration de 130 sujets provenant de deux ecoles. L'entretien complete la prise de donnees avec 13 sujets ayant accepte de poursuivre l'etude. Les donnees recueillies par ces instruments font ensuite l'objet d'une analyse de contenu. En premier lieu, les verbatims de l'epreuve et de l'entretien ont ete transcrits, puis codifies. La correction des reponses fournies pour les problemes resolus s'est faite a partir d'une grille d

  1. Heated die facilitates tungsten forming

    NASA Technical Reports Server (NTRS)

    Chattin, J. H.; Haystrick, J. E.; Laughlin, J. C.; Leidy, R. A.

    1966-01-01

    Tungsten forming in a press brake employs a bottom die assembly with a heating manifold between two water-cooled die sections. The manifold has hydrogen-oxygen burners spaced along its length for even heat during forming.

  2. Is the Smagorinsky coefficient sensitive to uncertainty in the form of the energy spectrum?

    NASA Astrophysics Data System (ADS)

    Meldi, M.; Lucor, D.; Sagaut, P.

    2011-12-01

    We investigate the influence of uncertainties in the shape of the energy spectrum over the Smagorinsky ["General circulation experiments with the primitive equations. I: The basic experiment," Mon. Weather Rev. 91(3), 99 (1963)] subgrid scale model constant CS: the analysis is carried out by a stochastic approach based on generalized polynomial chaos. The free parameters in the considered energy spectrum functional forms are modeled as random variables over bounded supports: two models of the energy spectrum are investigated, namely, the functional form proposed by Pope [Turbulent Flows (Cambridge University Press, Cambridge, 2000)] and by Meyers and Meneveau ["A functional form for the energy spectrum parametrizing bottleneck and intermittency effects," Phys. Fluids 20(6), 065109 (2008)]. The Smagorinsky model coefficient, computed from the algebraic relation presented in a recent work by Meyers and Sagaut ["On the model coefficients for the standard and the variational multi-scale Smagorinsky model," J. Fluid Mech. 569, 287 (2006)], is considered as a stochastic process and is described by numerical tools streaming from the probability theory. The uncertainties are introduced in the free parameters shaping the energy spectrum in correspondence to the large and the small scales, respectively. The predicted model constant is weakly sensitive to the shape of the energy spectrum when large scales uncertainty is considered: if the large-eddy simulation (LES) filter cut is performed in the inertial range, a significant probability to recover values lower in magnitude than the asymptotic Lilly-Smagorinsky model constant is recovered. Furthermore, the predicted model constant occurrences cluster in a compact range of values: the correspondent probability density function rapidly drops to zero approaching the extremes values of the range, which show a significant sensitivity to the LES filter width. The sensitivity of the model constant to uncertainties propagated in the

  3. Investigating Form-Focused Instruction.

    ERIC Educational Resources Information Center

    Ellis, Rod

    2001-01-01

    Provides an historical sketch of form-focused instruction research, defines what is meant by form-focused instruction, and discusses the main research methods that have been used to investigate form-focused instruction in terms of a broad distinction between confirmatory and interpretive research. (Author/VWL)

  4. Pourquoi les exercices de grammaire? (Why Grammar Exercises?)

    ERIC Educational Resources Information Center

    Bastuji, Jacqueline

    1977-01-01

    Recent theories and experiementation running the gamut from the absolute necessity of grammar to its uselessness in teaching a language form the basis of this article. Topics covered are: a typology of the grammar exercise; explicit grammar and linguistic competence; grammar exercises responding to real needs. (Text is in French.) (AMH)

  5. Guide de pratique clinique pour les lésions cérébrales traumatiques légères et les symptômes persistants

    PubMed Central

    Marshall, Shawn; Bayley, Mark; McCullagh, Scott; Velikonja, Diana; Berrigan, Lindsay

    2012-01-01

    Résumé Objectif Présenter les nouvelles lignes directrices sur la prise en charge des lésions cérébrales traumatiques légères (LCTL) et les symptômes persistants post-commotion (SPPC) afin de renseigner et d’orienter les médecins qui prennent en charge des patients qui se remettent d’une LCTL. Qualité des données On a effectué une recherche des guides de pratique clinique existants portant sur les LCTL et une synthèse critique des ouvrages scientifiques évaluant le traitement des SPPC. Étant donné la rareté des conseils sur la prise en charge des SPPC dans les travaux sur les lésions cérébrales traumatiques, une deuxième recherche documentaire a été faite pour recenser les guides de pratique clinique et les synthèses critiques concernant la prise en charge de ces symptômes communs dans la population en général. On a convoqué des professionnels de la santé provenant de différentes disciplines et régions du Canada et de l’étranger à une conférence consensuelle d’experts pour examiner les lignes directrices et les données probantes existantes et élaborer un guide complet pour la prise en charge des LCTL et des SPPC. Message principal À l’aide d’un processus Delphi modifié, on a produit 71 recommandations portant sur le diagnostic et la prise en charge des LCTL et des SPPC. De plus, on a inclus dans le guide de nombreuses ressources et des outils pour faciliter la mise en œuvre des recommandations. Conclusion Un guide de pratique clinique a été élaboré pour aider les professionnels de la santé à fournir des soins fondés sur les données probantes et les pratiques exemplaires à la population complexe de personnes qui ont des SPPC à la suite d’une LCTL.

  6. Warm Forming of Mg Sheets: From Incremental to Electromagnetic Forming

    NASA Astrophysics Data System (ADS)

    Ulacia, Ibai; Galdos, Lander; Esnaola, Jon Ander; Larrañaga, Jon; Arruebarrena, Gurutze; de Argandoña, Eneko Saenz; Hurtado, Iñaki

    2014-07-01

    Magnesium alloys are generating interest in the automotive and aeronautic industries due to their low density and potential to reduce gross vehicular weight. However, the formability of these alloys is poor and they are very difficult to be formed at room temperature due to their strong basal texture in rolled form. In this paper, the potential of magnesium alloy sheets to be processed at warm conditions is studied for four different forming technologies: incremental forming (IF), deep drawing (DD), hydroforming (HF), and electromagnetic forming (EMF). Forming mechanisms and process window are experimentally characterized by monitoring different process parameters. Special focus is made on the influence of the forming temperature and the strain rate. Thus, experiments at temperatures from room to 523 K (250 °C) and a wide range of strain rates, between 10-3 up to 103 s-1 according to each process nature and scope, are conducted. It is observed that, even the inherent forming rate range of each process vary considerably, increasing forming temperature increases formability for all of these forming processes. In the other hand, an opposing effect of the strain rate is observed between the quasi-static processes (IF, DD, and HF) and the high speed process (EMF). Thus, a detrimental effect on formability is observed when increasing strain rate for quasi-static processes, while a mild increase is observed for EMF.

  7. La physique des tas de sable Description phénoménologique de la propagation des contraintes dans les matériaux granulaires

    NASA Astrophysics Data System (ADS)

    Claudin, Ph.

    This work deals with the stress distribution in dry granular media such as sand. As a matter of fact, the granular family is amazingly wide: raw materials used in building, chemical or food industries are made of little grains. Predicting how forces propagate and fluctuate into granular media is then a real and concrete challenge. This goal is not easy to reach. One reason is that the stress distribution is strongly inhomogeneous: the forces applied on a granular system will be supported almost entirely by a fraction of the grains which form chains, or arches. As a consequence, the stress profile beneath a sandpile depends on the way that the pile was built. In order to describe quantitatively these effects, we proposed a phenomenological friction relation between arches. The differential equations which come out from this modelling are of hyperbolic type, which means that there exists particular lines for propagation called characteristics. We managed to match these characteristics with arches. These models fit well with experimental data, and can explain for example the dip of pressure observed beneath the apex of a pile made with a hopper. They also significantly improve Janssen's predictions for the silo. We also looked at stress fluctuations, and showed that granular material are intrinsically fragile when subjected to changing external forces or perturbations. This property has been particulary studied within a scalar arching model with which we were able to visualize changes of stress paths and subsequent changes of the stress distribution. Ce travail porte sur la description de la manière dont les forces se propagent dans les milieux granulaires comme le sable. Cette catégorie de matériaux est en fait très vaste, et pouvoir prédire de manière satisfaisante la répartition des contraintes au sein d'un système granulaire est un enjeu industriel réel et concret. Or ceci est difficile. Une des raisons en est que cette répartition est très inhomog

  8. Index of NASA prefixed forms

    NASA Technical Reports Server (NTRS)

    1992-01-01

    This Handbook sets forth information for the guidance of all users of the NASA Forms Management Program System. It is issued in accordance with the Federal Information Resources Management Regulation (FIRMR), Subpart 201-9.1. This Handbook sets forth an alpha-functional index of NASA-prefixed forms by title, identifying number, and unit of issue. The automated processing two-letter code (NF) has been substituted for the spelling out of the NASA form-prefix preceding the form number. To indicate a description in lieu of a distinct title, the entire reference under the Form Title/Description column has been enclosed in parentheses. A list of current forms, shown by number and page, is included for cross-reference and to preclude the ordering of those forms which have been deleted from the system. This Handbook will be updated, as appropriate. NHB 1420.2H dated July 1986, is cancelled.

  9. Les facteurs pronostiques de survie sans récidive chez les patientes atteintes de tumeur du col de l'utérus

    PubMed Central

    Dossou, Serpos; James, Laurianne; Bakkali, Hanae; Afif, Mohammed; Rahali, Leila; Irigo, Joelle; Ogandaga, Etienne; Kebdani, Tayeb; Ahid, Samir; Benjaafar, Noureddine

    2015-01-01

    La radiochimiothérapie est le traitement de référence des tumeurs du col localement avancées, et plusieurs études ont montré l'importance des facteurs pronostiques sur le contrôle local de la tumeur et la survie des malades. L'objectif de cette étude est d'évaluer l'impact des facteurs pronostiques, en particulier de l'étalement sur la survie sans récidive des patientes suivies pour cancer du col utérin. Il s'agit d'une série rétrospective portant sur 177 femmes suivies en 2011 pour tumeur du col utérin de stade IB à III selon la classification de FIGO 2009 ayant bénéficié d'une radiothérapie à la dose de 46 Grays sur le pelvis et une surimpression sur les paramètres envahis associée à du cisplatine 40mg/m2 par semaine suivie de curiethérapie réalisée selon le mode haut débit de dose (HDR) ou bas débit de dose (LDR). La moyenne d'âge était de 53ans, la médiane de l'étalement total était de 65 jours, 75% des patientes ont reçu 4 cures de chimiothérapie, et les patientes ont été suivies après le traitement pendant une durée médiane de 34 mois. La récidive locale et métastatique était de 33,3% chez les patientes ayant des adénopathies pelviennes, contre 16,3% chez celles qui en étaient indemnes (p= 0,031), elle était de 26,3% chez les patientes ayant un étalement supérieur à 65 jours contre 11% chez celles dont l'étalement en était inférieur (p= 0,01). La présence d'adénopathies pelviennes et l'étalement total de la radiothérapie apparaissaient respectivement comme les seuls facteurs pronostiques indépendant de survenue de récidive, p= 0,04 OR= 2,6 IC95% (1,05 6,3) et p= 0,01 OR= 2,9 IC95% (1,26 6,7). En analyse multivariée, la technique de curiethérapie p = 0,003 OR= 0,25 IC95% (0,1 0,6) et l'étalement total du traitement p= 0,0001 OR= 4,7 IC95% (2 10,8) apparaissaient comme les seuls facteurs pronostiques indépendant de survie sans récidive. L'étalement supérieur à 65 jours et la technique de curieth

  10. Hybrid LES/RANS Simulation of Transverse Sonic Injection into a Mach 2 Flow

    NASA Technical Reports Server (NTRS)

    Boles, John A.; Edwards, Jack R.; Baurle, Robert A.

    2008-01-01

    A computational study of transverse sonic injection of air and helium into a Mach 1.98 cross-flow is presented. A hybrid large-eddy simulation / Reynolds-averaged Navier-Stokes (LES/RANS) turbulence model is used, with the two-equation Menter baseline (Menter-BSL) closure for the RANS part of the flow and a Smagorinsky-type model for the LES part of the flow. A time-dependent blending function, dependent on modeled turbulence variables, is used to shift the closure from RANS to LES. Turbulent structures are initiated and sustained through the use of a recycling / rescaling technique. Two higher-order discretizations, the Piecewise Parabolic Method (PPM) of Colella and Woodward, and the SONIC-A ENO scheme of Suresh and Huyhn are used in the study. The results using the hybrid model show reasonably good agreement with time-averaged Mie scattering data and with experimental surface pressure distributions, even though the penetration of the jet into the cross-flow is slightly over-predicted. The LES/RANS results are used to examine the validity of commonly-used assumptions of constant Schmidt and Prandtl numbers in the intense mixing zone downstream of the injection location.

  11. STS-56 Commander Cameron, in LES, during JSC emergency egress training

    NASA Technical Reports Server (NTRS)

    1992-01-01

    STS-56 Discovery, Orbiter Vehicle (OV) 103, Commander Kenneth Cameron, wearing launch and entry suit (LES), poses at the Crew Compartment Trainer (CCT) side hatch before climbing into the mockup. Cameron, along with the other STS-56 crewmembers, is participating in an emergency egress simulation at JSC's Mockup and Integration Laboratory (MAIL) Bldg 9NE.

  12. Evaluation of Leray, LANS and Verstappen regularizations in LES, without and with added SGS modeling

    NASA Astrophysics Data System (ADS)

    Winckelmans, G.; Bourgeois, N.; Collet, Y.; Duponcheel, M.

    2009-11-01

    Regularization approaches (Leray, LANS and Verstappen) for the ``restriction in the production of small-scales'' in turbulence simulations have regained some interest in the LES community, because of their potentially appealing properties due to filtering. Their potential is here investigated using the best possible numerics (dealiased pseudo-spectral code) and on simple problems: transition of the Taylor-Green vortex (TGV) and its ensuing turbulence, developed homogeneous isotropic turbulence (HIT). The filtered velocity field is obtained using discrete filters, also of various orders (2 and 6). Diagnostics include energy, enstrophy, and spectra. The performance of the regularizations on the TGV is first evaluated in inviscid mode (96^3 Euler), then in viscous mode at Re=1600 (256^3 DNS and 48^3 LES). Although they delay the production of small scales, none of the regularizations can perform LES when the flow has become turbulent: the small scales are still too energized, and thus added subgrid-scale (SGS) modeling is required. The combination of regularization and SGS modeling (here using the RVM multiscale model) is then also evaluated. Finally, 128^3 LES of fully developed HIT at very high Re is also investigated, providing the asymptotic behavior. In particular, it is found that the regularization helps increase a bit the true inertial subrange obtained with the RVM model.

  13. Evaluation of Leray and Verstappen regularizations in LES, without and with added SGS modeling

    NASA Astrophysics Data System (ADS)

    Winckelmans, G.; Bourgeois, N.; Collet, Y.; Duponcheel, M.

    2010-11-01

    Regularization approaches (Leray and Verstappen) for the "restriction in the rate of production of small-scales" in turbulence simulations have regained some interest in the LES community. Their potential is here investigated using the best numerics (dealiased pseudo-spectral code) and on two cases: transition of the Taylor-Green vortex (TGV) and its ensuing turbulence, decaying homogeneous isotropic turbulence (HIT). The filtered velocity fields are obtained using discrete filters, also of various orders. Diagnostics include energy, enstrophy and spectra. The performance of the regularizations is first evaluated on the TGV in inviscid mode (96^3); then in viscous mode: 256^3 DNS at Re=1600, 128^3 LES at Re=5000 (compared to 1024^3 DNS). Although they indeed delay the rate of production of small scales, they cannot sustain LES when the flow has become turbulent: the small scales are still too energized. Added subgrid-scale (SGS) modeling is thus required. The combination of regularization and SGS modeling (here using the RVM multiscale model) is then also evaluated. Finally, 128^3 LES of fully developed HIT at very high Re is also investigated, providing the asymptotic behavior. The regularizations help increase the true inertial subrange obtained with the RVM model.

  14. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    SciTech Connect

    Steven Cannon; Clifford Smith

    2003-04-01

    Application and testing of the new combustion Large Eddy Simulation (LES) code for the design of advanced gaseous combustion systems is described in this 10th quarterly report. CFD Research Corporation has developed the LES module within the parallel, unstructured solver included in the commercial CFD-ACE+ software. In this quarter, validation and testing of the combustion LES code was performed for the DOE-Simval combustor. Also, Beta testing by consortium members was performed for various burner and combustor configurations. In the two quarters ahead, CFDRC will validate the code on the new DOE SimVal experiments. Experimental data from DOE should be available in June 2003, though LES calculations are currently being performed. This will ensure a truly predictive test of the software. CFDRC will also provide help to the consortium members on running their cases, and incorporate improvements to the software suggested by the beta testers. The beta testers will compare their predictions with experimental measurements and other numerical calculations. At the end of this project (October, 2003), a final released version of the software will be available for licensing to the general public.

  15. Assessing Laptop Use in Higher Education Classrooms: The Laptop Effectiveness Scale (LES)

    ERIC Educational Resources Information Center

    Lauricella, Sharon; Kay, Robin

    2010-01-01

    Considerable research has been conducted examining the use of laptops in higher education, however, a reliable and valid scale to assess in-class use of laptops has yet to be developed. The purpose of the following study was to develop and evaluate the "Laptop Effectiveness Scale" (LES). The scale consisted of four constructs: academic use and…

  16. STS-28 Columbia, OV-102, Pilot Richards adjusts LES before bailout exercises

    NASA Technical Reports Server (NTRS)

    1989-01-01

    STS-28 Columbia, Orbiter Vehicle (OV) 102, Pilot Richard N. Richards, adjusts launch and entry suit (LES) neck ring after donning launch and entry helmet (LEH). Richards prepares for shuttle emergency egress (bailout) procedures in JSC Mockup and Integration Laboratory Bldg 9A.

  17. A Test of the Validity of Inviscid Wall-Modeled LES

    NASA Astrophysics Data System (ADS)

    Redman, Andrew; Craft, Kyle; Aikens, Kurt

    2015-11-01

    Computational expense is one of the main deterrents to more widespread use of large eddy simulations (LES). As such, it is important to reduce computational costs whenever possible. In this vein, it may be reasonable to assume that high Reynolds number flows with turbulent boundary layers are inviscid when using a wall model. This assumption relies on the grid being too coarse to resolve either the viscous length scales in the outer flow or those near walls. We are not aware of other studies that have suggested or examined the validity of this approach. The inviscid wall-modeled LES assumption is tested here for supersonic flow over a flat plate on three different grids. Inviscid and viscous results are compared to those of another wall-modeled LES as well as experimental data - the results appear promising. Furthermore, the inviscid assumption reduces simulation costs by about 25% and 39% for supersonic and subsonic flows, respectively, with the current LES application. Recommendations are presented as are future areas of research. This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation grant number ACI-1053575. Computational resources on TACC Stampede were provided under XSEDE allocation ENG150001.

  18. STS-49 MS Thuot, in LES, at CCT side hatch during JSC's egress exercises

    NASA Technical Reports Server (NTRS)

    1992-01-01

    STS-49 Endeavour, Orbiter Vehicle (OV) 105, Mission Specialist (MS) Pierre J. Thuot, wearing launch and entry suit (LES), prepares to enter JSC's Crew Compartment Trainer (CCT) via the open side hatch as a technician looks on. Thuot along with the other STS-49 crewmembers is participating in a post-landing emergency egress exercise in JSC's Mockup and Integration Laboratory (MAIL) Bldg 9.

  19. La parole, vue et prise par les etudiants (Speech as Seen and Understood by Student).

    ERIC Educational Resources Information Center

    Gajo, Laurent, Ed.; Jeanneret, Fabrice, Ed.

    1998-01-01

    Articles on speech and second language learning include: "Les sequences de correction en classe de langue seconde: evitement du 'non' explicite" ("Error Correction Sequences in Second Language Class: Avoidance of the Explicit 'No'") (Anne-Lise de Bosset); "Analyse hierarchique et fonctionnelle du discours: conversations entre basketteurs a plus de…

  20. Enjeux de fin de vie dans les cas de démence avancée

    PubMed Central

    Arcand, Marcel

    2015-01-01

    Résumé Objectif Examiner les enjeux liés à l’établissement d’objectifs des soins pour les patients atteints de démence sévère, décrire lesles respectifs du médecin et des proches du patient dans le processus de prise de décision et suggérer des façons d’appuyer les proches qui souhaitent obtenir plus d’information sur les options thérapeutiques. Sources des données Une recherche d’articles pertinents publiés avant le 7 mars 2014 a été effectuée dans MEDLINE sur Ovid. Aucune étude de niveau I n’a été relevée; la plupart des articles fournissaient des preuves de niveaux III. Message principal Pour les patients atteints de démence avancée, la famille joue un rôle important dans la prise de décisions médicales. Les proches devraient recevoir de l’information ponctuelle sur l’évolution de la démence et les options relatives aux soins. Ils doivent comprendre qu’il pourrait être approprié d’adopter une approche de soins palliatifs, ce qui ne signifie pas que le patient est abandonné à son sort. Ils pourraient aussi souhaiter clarifier leur rôle dans le processus de prise de décision, surtout lorsqu’on envisage de mettre fin aux mesures de prolongement de vie. Conclusion Les médecins doivent voir la démence avancée comme une maladie terminale pour laquelle il existe un continuum de soins qui s’étend de l’approche de soins palliatifs avec mesures acceptables de prolongement de vie à l’approche exclusivement symptomatique. Il est primordial de clarifier les objectifs des soins et d’éduquer les proches pour éviter les interventions non souhaitées et pénibles.

  1. Recommandations pour le dépistage de l’hypertension chez les adultes canadiens

    PubMed Central

    Lindsay, Patrice; Gorber, Sarah Connor; Joffres, Michel; Birtwhistle, Richard; McKay, Donald; Cloutier, Lyne

    2013-01-01

    Résumé Objectif Présenter des recommandations concernant le dépistage de l’hypertension chez les adultes de 18 ans et plus qui n’ont pas reçu antérieurement de diagnostic d’hypertension. Qualité des données Les données probantes sont tirées d’une recension systématique dans MEDLINE, EMBASE et la base de données des synthèses systématiques de la Collaboration Cochrane (EBM Reviews), de janvier 1985 à septembre 2011. Les types d’études retenues se limitaient aux études randomisées contrôlées, aux synthèses systématiques et aux études observationnelles avec groupes témoins. Message principal Trois fortes recommandations se sont dégagées de données probantes de qualité modérée. Il est recommandé de mesurer la pression artérielle à toutes les consultations appropriées en soins primaires, conformément aux techniques actuelles décrites dans les recommandations du Programme éducatif canadien sur l’hypertension pour la mesure de la pression artérielle en cabinet et en soins ambulatoires. Les critères du Programme éducatif canadien sur l’hypertension pour l’évaluation et le diagnostic de l’hypertension devraient s’appliquer aux personnes chez qui on observe une pression artérielle élevée. Conclusion À la suite d’un examen des plus récentes données probantes, le Groupe d’étude canadien sur les soins de santé préventifs continue de recommander la mesure de la pression artérielle lors des consultations périodiques auprès du médecin.

  2. Les rivières et les sources de la Plaine du Cul-de-Sac: extrait du rapport sur les eaux souterraines de la Plaine du Cul-de-Sac

    USGS Publications Warehouse

    Taylor, George C., Jr.; Lemoine, Rémy C.

    1949-01-01

    Les principales rivières de la Plaine du Cul-de-Sac, la Rivière Grise ou Grande Rivière du Cul-de-Sac et la Rivière Blanche, prennent naissance sur le flanc Nord du Massif de la Selle à des altitudes de 1,300 à 1,800 mètres au dessus du niveau de la mer. Elles coulent à l’amont à travers des gorges profondes et sont éloignées de 9 Kms. dans la partie central de la bordure Sud de la plaine.

  3. Ethnicity and the Mass Media in Canada: An Annotated Bibliography = Bibliographie annotee sur les ethnies et les media au Canada.

    ERIC Educational Resources Information Center

    Karim, Karim H.; Sansom, Gareth

    This bibliography lists 135 publications dealing with the portrayal and employment of Canadians of all ethnic backgrounds in mainstream Canadian media. A broad definition of mass media encompassing all widely distributed communicative materials, including educational textbooks and forms of hate material, is used for the purposes of the…

  4. L'effet des deformations plastiques severes sur les proprietes d'hydruration du magnesium

    NASA Astrophysics Data System (ADS)

    Lang, Julien

    Le travail de recherche effectue durant mon projet de maitrise en physique a l'Universite du Quebec a Trois-Rivieres dans les laboratoires de l'Institut de Recherche sur l'Hydrogene etait de comparer l'effet du laminage a froid de la poudre de MgH2 avec celui du broyage mecanique. Nous avons etudie cette nouvelle technique en utilisant un laminoir vertical concu specialement pour laminer de la poudre. Nous avons lamine la poudre de MgH2 5, 25, 50 et 100 fois. La comparaison de la morphologie de la poudre de MgH 2 telle que recu du manufacturier et broye mecaniquement pendant 30 minutes avec celle de la poudre laminee ete faite a l'aide d'un microscope electronique a balayage. Nous avons par la suite mesure les proprietes de sorption d'hydrogene grace un appareil PCT de type Sievert. Nous avons aussi determine la structure cristalline par diffraction de rayons X. A partir de ces resultats, nous avons constate que le nombre optimal de laminages est de cinq et a les caracteristiques d'absorption/desorption d'hydrogene similaires a un broyage mecanique de 30 minutes. Nous avons aussi utilise les courbes de cinetiques d'absorption et de desorption d'hydrogene pour calculer l'etape limitative dans les reactions de sorption des echantillons lamines. Comme cinq laminages se font en environ 10 secondes, on voit que le laminage a froid est une technique plus interessante industriellement que le broyage mecanique a cause de l'important gain en temps et en energie.

  5. A comparison of dispersion calculations in bluff body wakes using LES and unsteady RANS

    SciTech Connect

    Paschkewitz, J S

    2006-01-19

    Accurate modeling of the dispersion behavior of sprays or particles is critical for a variety of problems including combustion, urban pollution or release events, and splash and spray transport around heavy vehicles. Bluff body wakes are particularly challenging since these flows are both highly separated and strongly unsteady. Attempting to model the dispersion of droplets or particles interacting with bluff body wakes is even more difficult since small differences in the flow field encountered by particles can lead to large differences in the dispersion behavior. Particles with finite inertia can exhibit additional complicating effects such as preferential concentration. In this preliminary study, we consider the dispersion of solid particles in the wake of a rectangular plane at a Reynolds number (Re) of 10000 and that of droplets in the wake of a simplified tractor-trailer geometry at Re = 2 x 10{sup 6} using both the Large Eddy Simulation (LES) and Unsteady Reynolds-Averaged Navier-Stokes (URANS) turbulence modeling approaches. The calculations were performed using identical meshes for both the LES and URANS models. Particle stresses are not backcoupled to the carrier fluid velocity solution. In the case of the rectangular plane wake, the LES calculation predicts a finer-scale and more persistent wake structure than the URANS one; the resulting particle dispersion is considerably ({approx} 40%) underpredicted for low inertia particles. For the case of the simplified tractor-trailer geometry, although the LES is underresolved, similar trends are observed with strong differences in the vertical and horizontal dispersion of the smallest particles. These results suggest that it may be necessary to use LES to accurately capture the dispersion behavior of small, low inertia particles or droplets, but that URANS may be sufficient for problems in which only large particles with substantial inertia are of primary concern.

  6. Les ruptures traumatiques du tendon quadricipital: à propos de 3 cas

    PubMed Central

    Benyass, Youssef; Chafry, Bouchaib; Koufagued, Kaldadak; Bouabid, Salim; Chagar, Belkacem

    2015-01-01

    Les ruptures traumatiques du tendon quadricipital sont rares, elles surviennent préférentiellement après 40 ans, suite à un traumatisme indirect chez le sportif (flexion contrariée du genou) ou traumatisme banal chez le sédentaire. La tendinopathie préexistante est fréquente. La rupture est le plus souvent totale et siège au corps du tendon 60% des cas ou décallotement quadricipital au bord supérieur de la rotule (40% des cas). Le diagnostic est essentiellement clinique. Les examens complémentaires (échographie et imagerie par résonance magnétique) sont utiles et appuient le diagnostique, mais sont souvent faussement rassurants hormis la radiographie qui montre une rotule basse. Le traitement essentiellement chirurgical associé à la rééducation fonctionnelle donne des résultats largement meilleurs. Le délai d'intervention est un facteur pronostic très important. Les auteurs rapportent 03cas de rupture de tendon quadricipital. L’âge moyen est de 50ans. Ils ont été traités chirurgicalement et revus régulièrement, avec un recul de 16 mois pour apprécier l’évolution. Les résultats ont été très bons chez 02 cas et bon chez 01 cas. L'amélioration a été très nette selon les critères: marche, douleur et reprise d'activité physique. PMID:26985261

  7. L’annonce d’une déficience motrice cérébrale : Une relation de confiance à construire entre les parents, le personnel paramédical et les médecins

    PubMed Central

    Pelchat, Diane; Lefebvre, Hélène; Bouchard, Jean-Marie

    2001-01-01

    RÉSUMÉ : L’annonce d’une déficience motrice cérébrale et des incapacités qui en découlent est une situation difficile à vivre pour les parents et les dispensateurs de soins (personnel paramédical et médecins). Un examen de la documentation médicale démontre que depuis vingt ans, le nombre de parents insatisfaits n’a pas changé. L’étude de type qualitatif et exploratoire, effectuée à la demande de milieux de réadaptation, vise à décrire le processus d’annonce d’un diagnostic de déficience motrice cérébrale (DMC) à partir de l’expérience des différents acteurs en cause et à déterminer les facteurs qui facilitent ou compliquent la relation de confiance. Les résultats indiquent que les parents et les dispensateurs de soins vivent dans deux mondes de perception différents au moment de l’annonce, lesquels se rejoignent difficilement. Les parents sont envahis par le drame qu’ils vivent, tandis que les médecins sont concentrés sur le contenu à transmettre aux parents. Cette annonce provoque une importante incertitude qui bloque la communication entre les partenaires, mais elle pourrait devenir un stimulant à de nouvelles stratégies d’adaptation. PMID:20084263

  8. The semantics of biological forms.

    PubMed

    Albertazzi, Liliana; Canal, Luisa; Dadam, James; Micciolo, Rocco

    2014-01-01

    This study analyses how certain qualitative perceptual appearances of biological forms are correlated with expressions of natural language. Making use of the Osgood semantic differential, we presented the subjects with 32 drawings of biological forms and a list of 10 pairs of connotative adjectives to be put in correlations with them merely by subjective judgments. The principal components analysis made it possible to group the semantics of forms according to two distinct axes of variability: harmony and dynamicity. Specifically, the nonspiculed, nonholed, and flat forms were perceived as harmonic and static; the rounded ones were harmonic and dynamic. The elongated forms were somewhat disharmonious and somewhat static. The results suggest the existence in the general population of a correspondence between perceptual and semantic processes, and of a nonsymbolic relation between visual forms and their adjectival expressions in natural language. PMID:25669053

  9. Undercuts by Laser Shock Forming

    SciTech Connect

    Wielage, Hanna; Vollertsen, Frank

    2011-05-04

    In laser shock forming TEA-CO{sub 2}-laser induced shock waves are used to form metal foils, such as aluminum or copper. The process utilizes an initiated plasma shock wave on the target surface, which leads to a forming of the foil. A challenge in forming technologies is the manufacturing of undercuts. By conventional forming methods these special forms are not feasible. In this article, it is presented that undercuts in the micro range can be produced by laser shock deep drawing. Different drawing die diameters, drawing die depths and the material aluminum in the thicknesses 20 and 50 {mu}m were investigated. It will be presented that smaller die diameters facilitate undercuts compared to bigger die diameters. The phenomena can be explained by Barlow's formula. Furthermore, it is shown which maximum undercut depth at different die diameters can be reached. To this end, cross-sections of the different parameter combinations are displayed.

  10. Seal for fluid forming tools

    DOEpatents

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  11. La fibroscopie digestive haute chez 2795 patients au centre hospitalier universitaire-campus de Lomé: les particularités selon le sexe

    PubMed Central

    Lawson-Ananissoh, Laté Mawuli; Bouglouga, Oumboma; Bagny, Aklesso; Kaaga, Laconi; Redah, Datouda

    2014-01-01

    Introduction Notre étude consistera à rapporter les indications et les lésions objectivées à la fibroscopie digestive haute et relever les particularités selon le sexe. Méthodes Étude rétrospective, descriptive sur des résultats de compte-rendu de la fibroscopie digestive haute menée en unité d'endoscopie digestive du service d'hépato-gastro-entérologie du CHU Campus de Lomé du 15 Mai 2009 au 31 Décembre 2013. Résultats La fibroscopie digestive haute a été réalisée chez 2795 patients dont 1188 hommes et 1607 femmes. L’âge moyen était de 40,65 ans (Extrêmes: 5 et 93 ans). La fibroscopie digestive haute était normale chez les femmes que chez les hommes avec une différence statistiquement significative (p = 0,000). Les principales indications étaient: les épigastralgies chez les femmes (p = 0,000); les hémorragies digestives hautes (p = 0,000) et l'hypertension portale (p = 0,000) chez les hommes; 3485 lésions pathologiques ont été observées. La pathologie inflammatoire prédominait (56,3%), la pathologie ulcéreuse (13,89%), la pathologie tumorale (2,01%). Les varices et la candidose œsophagiennes étaient significativement notées chez les hommes. Les ulcérations gastriques (p = 0,000), le reflux biliaire duodéno-gastrique (p = 0,017) étaient plus retrouvés chez les femmes et la gastropathie hypertensive beaucoup plus chez les hommes (p = 0,000). Que les lésions duodénales soient inflammatoires ou ulcéreuses associées ou non à une sténose bulbaire, elles étaient plus fréquentes chez les hommes. Conclusion De manière générale, il y avait une prédominance des lésions inflammatoires chez les femmes, les lésions tumorales et ulcéreuses chez les hommes PMID:25852805

  12. System for forming janus particles

    DOEpatents

    Hong, Liang; Jiang, Shan; Granick, Steve

    2011-01-25

    The invention is a method of forming Janus particles, that includes forming an emulsion that contains initial particles, a first liquid, and a second liquid; solidifying the first liquid to form a solid that contains at least a portion of the initial particles on a surface of the solid; and treating the exposed particle sides with a first surface modifying agent, to form the Janus particles. Each of the initial particles on the surface has an exposed particle side and a blocked particle side.

  13. L Form of Neisseria gonorrhoeae

    PubMed Central

    Roberts, Richard B.

    1966-01-01

    Roberts, Richard B. (Walter Reed Army Institute of Research, Washington, D.C.). L form of Neisseria gonorrhoeae. J. Bacteriol. 92:1609–1614. 1966.—L forms were produced by the penicillin gradient plate technique from a recently isolated strain of Neisseria gonorrhoeae. To date, these L forms have had 30 serial passages on medium containing penicillin. Stabilized L forms developed on penicillin-free medium after 10 or more passages in the presence of penicillin. Morphological characteristics of these organisms were identical to L forms of meningococci. Medium and environmental conditions necessary for optimal growth included: Brain Heart Infusion of pH 7.2 to 7.4, 1.1 to 1.3% agar, 10 to 20% sucrose, 10 to 20% horse serum, temperature at 35 to 36 C, and increased CO2 tension (candle jar). L forms were more resistant than the parent gonococcus to penicillin, ampicillin, methicillin, cycloserine, and cephalothin, whereas both organisms had similar sensitivities to bacitracin, vancomycin, ristocetin, novobiocin, tetracycline, and erythromycin. Revertant gonococci were produced on penicillin-free medium from L forms which had had 1, 5, and 10 serial passages. Morphology and fermentative reactions of revertant strains were identical to those of the parent gonococcus. Revertant strains produced L forms more readily than the parent organism; in fact, L forms from certain revertants did not require penicillin, but only serum and sucrose for their production and propagation on artificial medium. Images PMID:4959715

  14. Improving the forming capability of laser dynamic forming by using rubber as a forming medium

    NASA Astrophysics Data System (ADS)

    Shen, Zongbao; Liu, Huixia; Wang, Xiao; Wang, Cuntang

    2016-04-01

    Laser dynamic forming (LDF) is a novel high velocity forming technique, which employs laser-generated shock wave to load the sample. The forming velocity induced by the high energy laser pulse may exceed the critical forming velocity, resulting in the occurrence of premature fracture. To avoid the above premature fracture, rubber is introduced in LDF as a forming medium to prolong the loading duration in this paper. Laser induced shock wave energy is transferred to the sample in different forming stages, so the forming velocity can be kept below the critical forming velocity when the initial laser energy is high for fracture. Bulge forming experiments with and without rubber were performed to study the effect of rubber on loading duration. The experimental results show that, the shock wave energy attenuates during the propagation through the rubber layer, the rubber can avoid the premature fracture. So the plastic deformation can continue, the forming capability of LDF is improved. Due to the severe plastic deformation under rubber compression, adiabatic shear bands (ASB) occur in LDF with rubber. The material softening in ASB leads to the irregular fracture, which is different from the premature fracture pattern (regular fracture) in LDF without rubber. To better understand this deformation behavior, Johnson-Cook model is used to simulate the dynamic response and the evolution of ASB of copper sample. The simulation results also indicate the rubber can prolong the loading duration.

  15. Legal forms and reproductive norms.

    PubMed

    Fletcher, Ruth

    2003-06-01

    This article draws on Pashukanis's concept of legal form and on O'Brien's concept of synthetic value to argue that legal form plays a role in reproductive relations by constructing legal subjects as the bearers of reproductive responsibilities. Pashukanis conceived of legal form as playing a particular role in capitalist exchange relations by interpellating subjects as the bearers of property rights. O'Brien argued that reproduction's specific value is synthetic value, which represents the value of integrating nature and reason in species continuity. Synthetic value is distinct from exchange value or emotional value which may also attach to reproductive process. By working through Pashukanis's method of extracting legal form from specific social relations and by adapting it to reproductive relations, an example is provided of how legal form analysis can be extended beyond the particular context of capitalist exchange relations. Just as legal form constitutes owners and non-owners as legal subjects, so it constitutes reproducers and non-reproducers. By tracing the way in which law attributes reproductive responsibility, legal form analysis shows us how law draws a line between wanting to attribute responsibility and not to attribute it, and this contradiction is a hook which social forces such as sexuality, gender, race, class and disability can latch on to in pushing legal form to shape reproductive responsibilities in a particular way. Each legal form is also externally contradicted by other legal forms. When law negotiates a balance between the reproductive norms of responsibilities and rights, it demonstrates how particular legal forms manage the interaction of different sets of social relations, such as reproduction and exchange. PMID:15871155

  16. Les facteurs prédictifs de morbimortalité chez les patients sous ballon de contre pulsion intra-aortique en chirurgie cardiaque

    PubMed Central

    Elahmadi, Brahim; Motiaa, Youssef; Hatim, Abdedaim Elghadbane; Atmani, Noureddine; Moutakillah, Younes; Wahid, Fouad Amal; Elbekkali, Youssef; Houssa, Mahdi Ait; Razine, Rachid; Boulahya, Abdelatif; Drissi, Mohammed

    2015-01-01

    Le ballon de contre pulsion intra-aortique (BCPIA) est fréquemment utilisé en chirurgie cardiaque, comme moyen d'assistance circulatoire en cas de bas débit cardiaque. Il est d'intérêt clinique de déterminer les facteurs pronostiques chez les patients porteurs d'un BCPIA en chirurgie cardiaque, et qui restent un sujet rarement élucidé dans la littérature. L'objectif de notre travail est de déterminer les facteurs prédictifs de morbi-mortalité chez les patients sous ballon de contre pulsion intraortique en périopératoire d'une chirurgie cardiaque. Il s'agit d'une étude rétrospective portant sur l'ensemble des patients opérés en chirurgie cardiaque sous circulation extracorporelle, et ayant bénéficiés de la mise en place d'un ballon de contre pulsion intra-aortique en périopératoire, au service de chirurgie cardiovasculaire de l'Hôpital Militaire Mohamed V de Rabat, entre le mois de janvier 2005 et le mois d'aout 20014. Soixante dix patients ont été inclus dans notre étude. En analyse univariée l'âge, la dyspnée de stade III et IV, l'insuffisance cardiaque, la présence d'un infarctus du myocarde, d'une coronaropathie mono et bitronculaire, les anomalies du doppler de trons supra-aortique et du membre inférieur, le caractère urgent de la chirurgie, la durée de la circulation extracorporelle, l'instabilité hémodynamique postopératoire, le saignement et l'insuffisance rénale postopératoire étaient statistiquement associés à une mortalité postopératoire élevée. La dyskinésie préopératoire et la sortie de circulation extracorporelle sous drogues étaient associées à une morbidité globale élevée. En analyse multi variée, seule l'âge, constituait un facteur de risque indépendant de mortalité dans notre série avec un Odds Ratio (OR): 1,89 ; un Intervalle de Confiance (IC) 95% de (1,52-4,97) et un p =0,045. Au terme de notre étude, le taux de mortalité était de 48,57% et de morbidité globale était de 87,1%. Il

  17. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    SciTech Connect

    Clifford E. Smith; Steven M. Cannon; Virgil Adumitroaie; David L. Black; Karl V. Meredith

    2005-01-01

    In this project, an advanced computational software tool was developed for the design of low emission combustion systems required for Vision 21 clean energy plants. Vision 21 combustion systems, such as combustors for gas turbines, combustors for indirect fired cycles, furnaces and sequestrian-ready combustion systems, will require innovative low emission designs and low development costs if Vision 21 goals are to be realized. The simulation tool will greatly reduce the number of experimental tests; this is especially desirable for gas turbine combustor design since the cost of the high pressure testing is extremely costly. In addition, the software will stimulate new ideas, will provide the capability of assessing and adapting low-emission combustors to alternate fuels, and will greatly reduce the development time cycle of combustion systems. The revolutionary combustion simulation software is able to accurately simulate the highly transient nature of gaseous-fueled (e.g. natural gas, low BTU syngas, hydrogen, biogas etc.) turbulent combustion and assess innovative concepts needed for Vision 21 plants. In addition, the software is capable of analyzing liquid-fueled combustion systems since that capability was developed under a concurrent Air Force Small Business Innovative Research (SBIR) program. The complex physics of the reacting flow field are captured using 3D Large Eddy Simulation (LES) methods, in which large scale transient motion is resolved by time-accurate numerics, while the small scale motion is modeled using advanced subgrid turbulence and chemistry closures. In this way, LES combustion simulations can model many physical aspects that, until now, were impossible to predict with 3D steady-state Reynolds Averaged Navier-Stokes (RANS) analysis, i.e. very low NOx emissions, combustion instability (coupling of unsteady heat and acoustics), lean blowout, flashback, autoignition, etc. LES methods are becoming more and more practical by linking together tens

  18. Automated Test-Form Generation

    ERIC Educational Resources Information Center

    van der Linden, Wim J.; Diao, Qi

    2011-01-01

    In automated test assembly (ATA), the methodology of mixed-integer programming is used to select test items from an item bank to meet the specifications for a desired test form and optimize its measurement accuracy. The same methodology can be used to automate the formatting of the set of selected items into the actual test form. Three different…

  19. When Permission Forms Work Best

    ERIC Educational Resources Information Center

    Zirkel, Perry A.

    2005-01-01

    Public schools routinely require permission or release forms for field trips and other activities of potential liability. The legal status of such forms varies, but they are generally considered neither rock-solid protection nor legally valueless in terms of immunity. This article presents a case involving a student who sustained bicycle injuries…

  20. Method of forming ceramic bricks

    DOEpatents

    Poeppel, Roger B.; Claar, Terry D.; Silkowski, Peter

    1988-01-01

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  1. Method of forming ceramic bricks

    DOEpatents

    Poeppel, Roger B.; Claar, Terry D.; Silkowski, Peter

    1988-09-06

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  2. Method of forming ceramic bricks

    DOEpatents

    Poeppel, R.B.; Claar, T.D.; Silkowski, P.

    1987-04-22

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  3. Cutting Costs on Computer Forms.

    ERIC Educational Resources Information Center

    Rupp, Robert V., Jr.

    1989-01-01

    Using the experience of Ford Motor Company, Oscar Meyer, and IBM, this article shows that companies are enjoying high quality product performance and substantially lower costs by converting from premium white bond computer stock forms to blended bond forms. School administrators are advised to do likewise. (MLH)

  4. Organic forms of soil nitrogen

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The chemical forms of soil organic nitrogen (N) are thought to influence the cycling rates of soil N. Limited evidence for this relationship is available, though, because until recently technical constraints have not allowed adequate elucidation of the chemical forms. Recent developments in spectros...

  5. Developpement d'un vibrateur acoustique pour precipiter les defauts latents de circuits electroniques

    NASA Astrophysics Data System (ADS)

    Lafleur, Francois

    2003-08-01

    Le procede de deverminage, ou Environmental Stress Screening (ESS), est employe principalement dans le domaine de l'electronique pour reduire les mortalites infantiles des produits avant leur livraison. Il utilise usuellement des stimulations environnementales telles que les vibrations ou la temperature produites a l'aide d'equipements conventionnels d'essais qui sont tres couteux et difficiles a implanter. Le but de cette recherche est le developpement d'une nouvelle methode d'excitation vibratoire des plaques de circuits electroniques a moindre cout par l'emploi de l'excitation acoustique. Le projet a mene au developpement d'un vibrateur acoustique pouvant etre utilise lors d'implantations du procede ESS en milieu industriel. L'utilisation de cette nouvelle technologie et des methodes novatrices de personnalisation des spectres ESS proposees dans cette these permettent la precipitation de defaillances latentes presentes dans les produits electroniques de facon efficace et securitaire et ce, a moindre cout par rapport aux technologies concurrentes. La methodologie des travaux presentes dans cette these inclus: (1) La generation acoustique des vibrations sur les circuits; (2) L'analyse modale acoustique des circuits par des methodes a reference unique et a references multiples; (3) La precipitation de defauts latents typiques des circuits electroniques; (4) Une methode d'individualisation des spectres vibratoires tenant compte des caracteristiques structurelles des circuits; (5) La presentation de la configuration de l'equipement acoustique et les resultats d'implantation du procede. Nonobstant la fabrication, l'installation et la mise en service d'un equipement en milieu industriel (depuis le mois de mai 2002), ces travaux ont permis l'obtention de trois familles de brevets et la publication de six articles de conference: trois portant sur l'analyse modale a reference unique, un portant sur l'analyse modale a references multiples, un autre portant sur la

  6. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    SciTech Connect

    Clifford E. Smith

    2005-04-01

    Vision 21 combustion systems will require innovative low emission designs and low development costs if Vision 21 goals are to be realized. In this three-year project, an advanced computational software tool will be developed for the design of low emission combustion systems required for Vision 21 clean energy plants. The combustion Large Eddy Simulation (LES) software will be able to accurately simulate the highly transient nature of gaseous-fueled turbulent combustion so that innovative concepts can be assessed and developed with fewer high-cost experimental tests. During the first year, the project included the development and implementation of improved chemistry (reduced GRI mechanism), subgrid turbulence (localized dynamic), and subgrid combustion-turbulence interaction (Linear Eddy) models into the CFDACE+ code. University expertise (Georgia Tech and UC Berkeley) was utilized to help develop and implement these advanced submodels into the unstructured, parallel CFD flow solver, CFD-ACE+. Efficient numerical algorithms that rely on in situ look-up tables or artificial neural networks were implemented for chemistry calculations. In the second year, the combustion LES software was evaluated and validated using experimental data from lab-scale and industrial test configurations. This code testing (i.e., alpha testing) was performed by CFD Research Corporation's engineers. During the third year, six industrial and academic partners used the combustion LES code and exercised it on problems of their choice (i.e., beta testing). Final feedback and optimizations were then be implemented in the final release version of the combustion LES software that will be licensed to the general public. An additional one-year task was added for the fourth year of this program entitled, ''LES Simulations of SIMVAL Results''. For this task, CFDRC performed LES calculations of selected SIMVAL cases, and compared predictions with measurements. In addition to comparisons with NO{sub x

  7. Les accidents aux AVK: étude rétrospective à propos de 30 cas

    PubMed Central

    Serghini, Issam; Aissaoui, Younés; Quamouss, Youssef; Sedikki, Rachid; Taj, Nourredine; Salim Alaoui, Jaafar; Zoubir, Mohamed; Boughanem, Mohamed

    2012-01-01

    Les accidents hémorragiques sous AVK (antivitamines K) sont la première cause d’hospitalisation iatrogène. Le but de cette étude est de ressortir les caractéristiques des patients présentant des accidents hémorragiques graves sous AVK et de mettre le point sur la prise en charge. Nous avons réalisé une étude rétrospective portant sur 30 malades, réalisée au service de réanimation de l’hôpital militaire Avicenne de Marrakech. L’âge moyen de nos patients est de 59, 6 avec un sexe ratio de 1,5 (18 femmes et 12 femmes). On note dans notre série le terrain multi-taré des patients sous AVK avec plusieurs antécédents en cause. La fibrillation auriculaire était la principale indication recensée. Plus que la moitié ne bénéficiaient pas d’une bonne surveillance biologique à base d’INR (international normalized ratio). Le saignement d’origine gastro-intestinal était le plus fréquent. La conduite était différente en fonction des cas mais axée sur l’arrêt des AVK, l’administration de vit K, la transfusion de culots globulaires et plasma frais congelé. Plus du quart des patients admis sont décédés. L’index de Landefeld s’est avéré utile, il permet de classer les patients selon le risque prédictif de saignement (élevé moyen ou faible), ce qui concordait avec les résultats de notre étude. Son importance est d’ autant plus qu’il est facile à mesurer et à appliquer par le médecin en ambulatoire et permet de définir les patients nécessitant une surveillance accrue. La polymédication et les antécédents de saignement digestif sont apparus comme facteur de risque de saignement sous AVK. La prévention de la survenue de ces accidents est le pilier de la prise en charge, d’où l’importance de l’information et de l’éducation des différents intervenants dans cette complication iatrogène potentiellement mortelle. PMID:22514758

  8. Les fractures distales de la clavicule type II de Neer: plaque à crochet versus brochage transacromiale

    PubMed Central

    Mechchat, Atif; Elidrissi, Mohammed; Shimi, Mohammed; Elibrahimi, Abdelhalim; Elmrini, Abdelmajid

    2015-01-01

    Cette étude a été menée afin de faire une comparaison entre deux techniques chirurgicales différentes: la plaque à crochet et l'embrochage dans les fractures instables du quart externe de la clavicule. Nous avons mené une étude prospective entre 2009 et 2013, incluant deux groupes de patients: un premier groupe de 14 patients traités par plaque à crochet par voie d'abord antéro-inférieure, un second de 12 patients traités par brochage. Tous les patients ont été hospitalisés 24 h après la chirurgie et ont été suivi pendant 1 an. Nous avons comparé les résultats des deux techniques en étudiant: le temps opératoire, le saignement, délai de consolidation, la douleur et la fonction selon le score de constant. L'analyse statistique des résultats fonctionnels et radiologiques a montré la supériorité d'une technique par rapport à l'autre; ainsi l’âge moyen global était de 32,6 ans (+/- 13,7), le sex-ratio (H/F) était de 1. Le temps opératoire moyen est de 35 min pour la plaque à crochet contre 45 minutes pour le brochage, le délai moyen de consolidation était de 6,1 (+/-0,7) semaines dans le groupe traité par plaque vissée, et de 6 (+/-0,7) semaines dans le groupe traité par embrochage (p = 0,5), le score de Constant absolu moyen était respectivement de 86 (+/-10,4) et de 90,92 (+/-2,5) (p = 0,04). L'analyse uni variée a montré une association statistiquement significative entre les paramètres d’évaluation et les deux techniques chirurgicales étudiées. Par conséquent, l’étude a noté la supériorité de la plaque à crochet contre l'embroche dans les fractures instables du quart externe de la clavicule. PMID:26090053

  9. Nouvelle methode pour les etudes des interactions aeroservoelastiques en boucle ouverte sur les avions F/A-18, CL-604 et ATM et en boucle fermee sur l'ATM

    NASA Astrophysics Data System (ADS)

    Dinu, Alin Dorian

    2006-04-01

    Nous avons concu, implemente puis valide une nouvelle methode d'approximation des forces aerodynamiques non stationnaires a l'aide des polynomes orthogonaux de Chebyshev. Cela represente une contribution originale dans l'analyse des interactions aeroservoelastiques. La premiere serie de resultats obtenus par cette nouvelle methode (erreurs d'approximation des forces aerodynamiques non stationnaires) est comparee avec les resultats des methodes LS et de Pade. La deuxieme serie de resultats (vitesses et frequences de battement obtenues avec cette nouvelle methode) est comparee avec celles obtenues par les methodes classiques LS et de Pade. Ces deux series de resultats obtenus par notre methode et par les deux methodes classiques LS et de Pade sont validees sur trois types differents d'avions: l'ATM (Aircraft Test Model), le F/A-18 en collaboration avec les laboratoires de la NASA Dryden Flight Research Center, et enfin le Challenger CL-604 de Bombardier Aeronautique.

  10. Quantum modular forms, mock modular forms, and partial theta functions

    NASA Astrophysics Data System (ADS)

    Kimport, Susanna

    Defined by Zagier in 2010, quantum modular forms have been the subject of an explosion of recent research. Many of these results are aimed at discovering examples of these functions, which are defined on the rational numbers and have "nice" modularity properties. Though the subject is in its early stages, numerous results (including Zagier's original examples) show these objects naturally arising from many areas of mathematics as limits of other modular-like functions. One such family of examples is due to Folsom, Ono, and Rhoades, who connected these new objects to partial theta functions (introduced by Rogers in 1917) and mock modular forms (about which there is a rich theory, whose origins date back to Ramanujan in 1920). In this thesis, we build off of the work of Folsom, Ono, and Rhoades by providing an infinite family of quantum modular forms of arbitrary positive half-integral weight. Further, this family of quantum modular forms "glues" mock modular forms to partial theta functions and is constructed from a so-called "universal" mock theta function by extending a method of Eichler and Zagier (originally defined for holomorphic Jacobi forms) into a non-holomorphic setting. In addition to the infinite family, we explore the weight 1/2 and 3/2 functions in more depth. For both of these weights, we are able to explicitly write down the quantum modular form, as well as the corresponding "errors to modularity," which can be shown to be Mordell integrals of specific theta functions and, as a consequence, are real-analytic functions. Finally, we turn our attention to the partial theta functions associated with these low weight examples. Berndt and Kim provide asymptotic expansions for a certain class of partial theta functions as q approaches 1 radially within the unit disk. Here, we extend this work to not only obtain asymptotic expansions for this class of functions as q approaches any root of unity, but also for a certain class of derivatives of these functions

  11. Canonical forms for nonlinear systems

    NASA Technical Reports Server (NTRS)

    Su, R.; Hunt, L. R.; Meyer, G.

    1983-01-01

    Necessary and sufficient conditions for transforming a nonlinear system to a controllable linear system have been established, and this theory has been applied to the automatic flight control of aircraft. These transformations show that the nonlinearities in a system are often not intrinsic, but are the result of unfortunate choices of coordinates in both state and control variables. Given a nonlinear system (that may not be transformable to a linear system), we construct a canonical form in which much of the nonlinearity is removed from the system. If a system is not transformable to a linear one, then the obstructions to the transformation are obvious in canonical form. If the system can be transformed (it is called a linear equivalent), then the canonical form is a usual one for a controllable linear system. Thus our theory of canonical forms generalizes the earlier transformation (to linear systems) results. Our canonical form is not unique, except up to solutions of certain partial differential equations we discuss. In fact, the important aspect of this paper is the constructive procedure we introduce to reach the canonical form. As is the case in many areas of mathematics, it is often easier to work with the canonical form than in arbitrary coordinate variables.

  12. Colloidal thermoresponsive gel forming hybrids.

    PubMed

    Liu, Ruixue; Tirelli, Nicola; Cellesi, Francesco; Saunders, Brian R

    2010-09-15

    Colloidal hybrids comprise organic and inorganic components and are attracting considerable attention in the literature. Recently, we reported hybrid anisotropic microsheets that formed thermoresponsive gels in polymer solutions [Liu et al., Langmuir, 25, 490, 2009]. Here, we investigate the composition and properties of these hybrid colloids themselves in detail for the first time. Three different cationic PNIPAm (N-isopropylacrylamide) graft copolymers and two inorganic nanoparticle types (laponite and Ludox silica) were used to prepare a range of hybrids. Anisotropic microsheets only formed when laponite particles were added to the copolymer implying directed self-assembly. Aqueous dispersions of the microsheets spontaneously formed gels at room temperature and these gels were thermoresponsive. They represent a new class of gel forming colloid and are termed thermoresponsive gel forming hybrids. The compositions of the hybrids were determined from thermogravimetric analysis and those that gave gel forming behaviour identified. Variable-temperature rheology experiments showed that the elasticity of the gels increased linearly with temperature. The reversibility of the thermally-triggered changes in gel elasticity was investigated. The concentration dependence of the rheology data was well described by elastic percolation scaling theory and the data could be collapsed onto a master curve. The concentration exponent for the elastic modulus was 2.5. The strong attractive interactions that exist between the dispersed gel forming hybrids was demonstrated by the formation of stable thermoresponsive hybrid hydrogels through casting of hybrid dispersions. PMID:20561633

  13. Interactions électron-électron dans les fils mésoscopiques

    NASA Astrophysics Data System (ADS)

    Pierre, F.

    Electron-electron interactions in mesoscopic wires In metallic thin films, the screening of Coulomb interactions is less efficient than in bulk metals because of electron elastic scattering from film boundaries, lattice defects, and impurities. As a consequence, at sub-kelvin temperatures, electron-electron interactions are expected to be the dominant inelastic process undergone by electrons, which determines energy exchange and limits the electronic phase coherence. We present in this book three experiments that probe inelastic collisions experienced by electrons at low temperature, in order to find out their mechanism. In the first part, we present a series of measurements of the energy distribution function of electrons in copper, gold and silver wires driven in a steady-state, out of equilibrium situation. These experiments reveal the rate at which electrons exchange energy. These results are compared in the second part with the temperature dependence of the phase coherence time of electrons tau_{φ}, which is deduced from the magnetoresistance of long wires. The phase coherence of electrons is limited by all inelastic collisions, independently of the energy exchanged. Different mechanisms to account for the energy exchange rate and dephasing times are proposed and compared with experiments. In the third part, we present measurements of the conductance of a long tunnel junction between an aluminum wire and a ground plane. The dip in the conductance at zero voltage is expected from the theory of electron-electron interactions. To compare measurements and theoretical predictions, we rephrase the microscopic theory of electron-electron interactions in terms of an electromagnetic impedance, as is done for the phenomenological theory of Coulomb blockade. Dans les couches minces métalliques, l'écrantage des interactions coulombiennes entre électrons est moins efficace que dans les métaux massifs en raison des chocs élastiques que subissent les électrons sur les

  14. Process to form mesostructured films

    DOEpatents

    Brinker, C. Jeffrey; Anderson, Mark T.; Ganguli, Rahul; Lu, Yunfeng

    1999-01-01

    This invention comprises a method to form a family of supported films film with pore size in the approximate range 0.8-20 nm exhibiting highly ordered microstructures and porosity derived from an ordered micellar or liquid-crystalline organic-inorganic precursor structure that forms during film deposition. Optically transparent, 100-500-nm thick films exhibiting a unique range of microstructures and uni-modal pore sizes are formed in seconds in a continuous coating operation. Applications of these films include sensors, membranes, low dielectric constant interlayers, anti-reflective coatings, and optical hosts.

  15. Process to form mesostructured films

    DOEpatents

    Brinker, C.J.; Anderson, M.T.; Ganguli, R.; Lu, Y.F.

    1999-01-12

    This invention comprises a method to form a family of supported films with pore size in the approximate range 0.8-20 nm exhibiting highly ordered microstructures and porosity derived from an ordered micellar or liquid-crystalline organic-inorganic precursor structure that forms during film deposition. Optically transparent, 100-500-nm thick films exhibiting a unique range of microstructures and uni-modal pore sizes are formed in seconds in a continuous coating operation. Applications of these films include sensors, membranes, low dielectric constant interlayers, anti-reflective coatings, and optical hosts. 12 figs.

  16. Supergravity actions with integral forms

    NASA Astrophysics Data System (ADS)

    Castellani, L.; Catenacci, R.; Grassi, P. A.

    2014-12-01

    Integral forms provide a natural and powerful tool for the construction of supergravity actions. They are generalizations of usual differential forms and are needed for a consistent theory of integration on supermanifolds. The group geometrical approach to supergravity and its variational principle are reformulated and clarified in this language. Central in our analysis is the Poincaré dual of a bosonic manifold embedded into a supermanifold. Finally, using integral forms we provide a proof of Gates' so-called "Ectoplasmic Integration Theorem", relating superfield actions to component actions.

  17. Development of a Hybrid RANS/LES Method for Turbulent Mixing Layers

    NASA Technical Reports Server (NTRS)

    Georgiadis, Nicholas J.; Alexander, J. Iwan D.; Reshotko, Eli

    2001-01-01

    Significant research has been underway for several years in NASA Glenn Research Center's nozzle branch to develop advanced computational methods for simulating turbulent flows in exhaust nozzles. The primary efforts of this research have concentrated on improving our ability to calculate the turbulent mixing layers that dominate flows both in the exhaust systems of modern-day aircraft and in those of hypersonic vehicles under development. As part of these efforts, a hybrid numerical method was recently developed to simulate such turbulent mixing layers. The method developed here is intended for configurations in which a dominant structural feature provides an unsteady mechanism to drive the turbulent development in the mixing layer. Interest in Large Eddy Simulation (LES) methods have increased in recent years, but applying an LES method to calculate the wide range of turbulent scales from small eddies in the wall-bounded regions to large eddies in the mixing region is not yet possible with current computers. As a result, the hybrid method developed here uses a Reynolds-averaged Navier-Stokes (RANS) procedure to calculate wall-bounded regions entering a mixing section and uses a LES procedure to calculate the mixing-dominated regions. A numerical technique was developed to enable the use of the hybrid RANS-LES method on stretched, non-Cartesian grids. With this technique, closure for the RANS equations is obtained by using the Cebeci-Smith algebraic turbulence model in conjunction with the wall-function approach of Ota and Goldberg. The LES equations are closed using the Smagorinsky subgrid scale model. Although the function of the Cebeci-Smith model to replace all of the turbulent stresses is quite different from that of the Smagorinsky subgrid model, which only replaces the small subgrid turbulent stresses, both are eddy viscosity models and both are derived at least in part from mixing-length theory. The similar formulation of these two models enables the RANS

  18. Evaluation of a liquid cooling garment as a component of the Launch and Entry Suit (LES)

    NASA Technical Reports Server (NTRS)

    Waligora, J.; Charles, J.; Fritsch, I.; Fortney, S.; Siconolfi, S.; Pepper, L.; Bagian, L.; Kumar, V.

    1994-01-01

    The LES is a partial pressure suit and a component of the shuttle life support system used during launch and reentry. The LES relies on gas ventilation with cabin air to provide cooling. There are conditions during nominal launch and reentry, landing, and post-landing phases when cabin temperature is elevated. Under these conditions, gas cooling may result in some discomfort and some decrement in orthostatic tolerance. There are emergency conditions involving loss of cabin ECS capability that would challenge crew thermal tolerance. The results of a series of tests are presented. These tests were conducted to assess the effectiveness of a liquid-cooled garment in alleviating thermal discomfort, orthostatic intolerance, and thermal intolerance during simulated mission phases.

  19. Reynolds Stress Structures in the Hybrid RANS/LES of a Planar Channel

    NASA Astrophysics Data System (ADS)

    Weatheritt, Jack; Sandberg, Richard; Lozano-Durán, Adrian

    2016-04-01

    The near-wall cycle of hybrid RANS/LES is studied by calculating the flow through a planar channel. Statistical results are commented on and related to instantaneous structures which are extracted from the flow field. The problematic structures in the artificial near-wall cycle, well known to be super-streaks, are identified and quantified. The calibration of such closures provides a correct mixing length argument in the logarithmic layer. However because of these overly intense streamwise streaks, it is impossible to simultaneously predict the Reynolds streamwise normal and shear stress components correctly. Further, because the location of the RANS-LES interface changes spatially and temporally, we see these structures are more free to move vertically and this further worsens statistical results.

  20. LES and acoustic analysis of thermo-acoustic instabilities in a partially premixed model combustor

    NASA Astrophysics Data System (ADS)

    Hernández, Ignacio; Staffelbach, Gabriel; Poinsot, Thierry; Román Casado, Juan C.; Kok, Jim B. W.

    2013-01-01

    Numerical simulations were performed using Large Eddy Simulation (LES) and acoustic analysis tools to study thermo-acoustic instabilities in a methane/air academic burner installed at the University of Twente (The Netherlands). It operates under fuel-lean partially premixed conditions at atmospheric pressure, and was built to study thermo-acoustic instabilities in conditions representative of gas turbine Lean Premixed systems: gaseous fuel is injected upstream of the combustor and has a limited time to mix with air. Even though the objective is to burn in a premixed mode, the actual regime corresponds to a partially premixed flame where strong equivalence ratio variations are created especially during combustion instabilities. Capturing these modes with LES is a challenge: here, simulations for both stable and unstable regimes are performed. In the unstable case, the limit cycle oscillations (LCO) are characterized and compared to experimental results. Reasonable agreement is found between simulations and experiments.

  1. L’effet du yoga chez les patients atteints de cancer

    PubMed Central

    Côté, Andréanne; Daneault, Serge

    2012-01-01

    Résumé Objectif Déterminer si le yoga thérapeutique améliore la qualité de vie de patients atteints de cancer. Sources des données Recherche effectuée avec la base de données MEDLINE (1950–2010) en utilisant les mots-clés yoga, cancer et quality of life. Sélection des études Priorité accordée aux études cliniques randomisées contrôlées évaluant l’effet du yoga sur différents symptômes susceptibles de se présenter chez des patients atteints de cancer en Amérique du Nord. Synthèse Quatre études cliniques randomisées contrôlées ont d’abord été analysées, puis 2 études sans groupe-contrôle. Trois études réalisées en Inde et au Proche-Orient ont également apporté des éléments intéressants au plan méthodologique. Les interventions proposées comprenaient des séances de yoga d’une durée et d’une fréquence variables. Les paramètres mesurés variaient également d’une étude à l’autre. Plusieurs symptômes ont connu des améliorations significatives avec le yoga (meilleure qualité du sommeil, diminution des symptômes anxieux ou dépressifs, amélioration du bien-être spirituel, etc.). Il a aussi semblé que la qualité de vie, dans sa globalité ou dans certaines de ses composantes spécifiques, s’améliorait. Conclusion La variété des effets bénéfiques produits, l’absence d’effet secondaire et le rapport coût-bénéfice avantageux du yoga thérapeutique en fait une intervention intéressante à suggérer par les médecins de famille aux patients atteints de cancer. Certaines lacunes méthodologiques ont pu diminuer la puissance statistique des études présentées, à commencer par la taille restreinte des échantillons et par l’assiduité variable des patients soumis à l’intervention. Il est également possible que les échelles de mesure utilisées ne convenaient pas à ce type de situation et de clientèle pour qu’en soit dégagé un effet significatif. Toutefois, les commentaires

  2. Les fistules coronaires: à propos d'un cas et revue de la literature

    PubMed Central

    Bouzerda, Abdelmaji

    2015-01-01

    Les fistules coronaires sont des anomalies congénitales ou acquises relativement rares, au travers desquelles le flux sanguin coronaire est drainé vers une chambre cardiaque, un gros vaisseau ou une autre structure. Une cavité réceptrice à basse pression est souvent le site de drainage de ces fistules. Nous rapportons le cas d'un homme âgé de 30ans présentant des précordialgies atypique. L’épreuve d'effort est positive. L’évaluation par coronarographie met en évidence un réseau coronaire sain et un aspect de fistule coronarocamérale. L'objectif de cet article est d'aborder Les aspects cliniques, diagnostiques et thérapeutiques des fistules coronaires. PMID:26327982

  3. LES, DNS and RANS for the analysis of high-speed turbulent reacting flows

    NASA Technical Reports Server (NTRS)

    Givi, Peyman

    1994-01-01

    The objective of this research is to continue our efforts in advancing the state of knowledge in Large Eddy Simulation (LES), Direct Numerical Simulation (DNS), and Reynolds Averaged Navier Stokes (RANS) methods for the analysis of high-speed reacting turbulent flows. In the first phase of this research, conducted within the past six months, focus was in three directions: RANS of turbulent reacting flows by Probability Density Function (PDF) methods, RANS of non-reacting turbulent flows by advanced turbulence closures, and LES of mixing dominated reacting flows by a dynamics subgrid closure. A summary of our efforts within the past six months of this research is provided in this semi-annual progress report.

  4. Effects of subfilter velocity modelling on dispersed phase in LES of heated channel flow

    NASA Astrophysics Data System (ADS)

    Pozorski, Jacek; Knorps, Maria; Łuniewski, Mirosław

    2011-12-01

    A non-isothermal turbulent flow with the dispersed phase is modelled using the Large Eddy Simulation (LES) approach for fluid, one-way coupled with the equations of point-particle evolution. The channel is heated at both walls and isoflux boundary conditions are applied for fluid. Particle velocity and thermal statistics are computed. Of particular interest are the r.m.s. profiles and the probability density function of particle temperature in the near-wall region. We compare our findings with available reference data for particle-laden, heated channel flow. Moreover, an open issue in LES is the influence of non-resolved (residual) scales of fluid velocity and temperature fields on particles. In the present contribution, we apply a stochastic model for subfilter fluid velocity at the particle positions that aims at reconstructing the effects of the smallest scales of turbulence on particle dynamics. We analyse the impact of this model on particle thermal statistics.

  5. Approche pour les comportements sexuels inappropriés chez des personnes atteintes de démence

    PubMed Central

    Joller, Petra; Gupta, Neeraj; Seitz, Dallas P.; Frank, Christopher; Gibson, Michelle; Gill, Sudeep S.

    2013-01-01

    Résumé Objectif Présenter aux médecins de famille une mise à jour sur l’approche au diagnostic et à la prise en charge des comportements sexuels inappropriés (CSI) chez les personnes atteintes de démence. Sources des données On a fait une recherche dans MEDLINE et EMBASE pour cerner des articles pertinents publiés avant juin 2012. On n’a trouvé aucune étude de niveau I; la plupart des articles fournissaient des données probantes de niveau III. Message principal Les comportements sexuels inappropriés sont fréquents chez les personnes atteintes de démence. Divers facteurs (p. ex., culturels, religieux, perspectives sociétales de la sexualité gériatrique, questions médicolégales) pourraient compliquer l’évaluation de tels comportements et doivent être pris en compte pour permettre une prise en charge appropriée à chaque patient. Il existe des outils pour documenter les CSI. Des interventions créatives non pharmacologiques pour les CSI pourraient être efficaces quand elles sont adaptées à chaque patient. Certaines pharmacothérapies (p. ex., antidépresseurs, antiandrogènes, antipsychotiques et anticonvulsifs) ont été proposées pour les symptômes qui ne répondent pas aux interventions non pharmacologiques. Par ailleurs, les données probantes à l’appui des traitements à l’aide de médicaments sont limitées, les effets secondaires demeurent un aspect important à considérer et il est incertain s’ils devraient être utilisés comme traitement de première ou de deuxième intention. Conclusion Quoiqu’il n’y ait pas d’algorithme de traitements empiriquement établi pour les CSI reliés à la démence, les ouvrages actuels offrent certaines données probantes concernant diverses thérapies pharmacologiques et non pharmacologiques. Des recherches de grande qualité plus approfondies sont nécessaires de toute urgence pour guider les médecins de famille qui prennent en charge des patients qui ont des CSI reliés à la

  6. Enjeux de fin de vie dans les cas de démence avancée

    PubMed Central

    Arcand, Marcel

    2015-01-01

    Résumé Objectif Répondre aux questions souvent posées sur la prise en charge de la pneumonie en phase terminale, de l’apport nutritionnel insuffisant et de la déshydratation dans les cas de démence avancée. Sources des données Une recherche a été effectuée dans MEDLINE sur Ovid pour des articles pertinents publiés jusqu’en février 2015. Aucune étude de niveau I n’a été relevée; la plupart des articles fournissaient des preuves de niveaux III. Les suggestions en matière de prise en charge des symptômes s’appuient en partie sur une récente participation à une approche Delphi visant à concevoir une directive pour le soulagement optimal des symptômes chez les patients atteints de pneumonie et de démence. Message principal Les sondes d’alimentation ne sont pas recommandés chez les patients atteints de démence terminale. L’alimentation de confort manuelle est préférable. L’hydratation parentérale pourrait être utile, mais elle peut aussi contribuer à l’inconfort à la fin de la vie. Si les soins buccaux sont adéquats, l’abstention ou la cessation de l’alimentation et de l’hydratation artificielles ne sont généralement pas associées à des manifestations d’inconfort. Puisque la pneumonie est habituellement très inconfortable, les cliniciens doivent être attentifs à la maîtrise des symptômes. La sédation pour maîtriser l’agitation est souvent utile chez les patients atteints de démence terminale. Conclusion Les soins à visée symptomatique sont une option appropriée pour les manifestations terminales de la démence avancée. Les lignes directrices de prise en charge des symptômes proposées s’appuient sur une revue de la littérature et sur un consensus d’experts.

  7. Triggered pore-forming agents

    DOEpatents

    Bayley, Hagan; Walker, Barbara J.; Chang, Chung-yu; Niblack, Brett; Panchal, Rekha

    1998-01-01

    An inactive pore-forming agent which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell.

  8. Process for forming planarized films

    DOEpatents

    Pang, Stella W.; Horn, Mark W.

    1991-01-01

    A planarization process and apparatus which employs plasma-enhanced chemical vapor deposition (PECVD) to form plarnarization films of dielectric or conductive carbonaceous material on step-like substrates.

  9. Arbitrary p-form Galileons

    SciTech Connect

    Deffayet, C.; Deser, S.; Esposito-Farese, G.

    2010-09-15

    We show that scalar, 0-form, Galileon actions--models whose field equations contain only second derivatives--can be generalized to arbitrary even p-forms. More generally, they need not even depend on a single form, but may involve mixed p combinations, including equal p multiplets, where odd p fields are also permitted: We construct, for given dimension D, general actions depending on scalars, vectors, and higher p-form field strengths, whose field equations are of exactly second derivative order. We also discuss and illustrate their curved-space generalizations, especially the delicate nonminimal couplings required to maintain this order. Concrete examples of pure and mixed actions, field equations, and their curved-space extensions are presented.

  10. Differential form analysis using MACSYMA

    NASA Technical Reports Server (NTRS)

    Wahlquist, H. D.

    1977-01-01

    The MACSYMA file was written to perform these operations and discusses the improvements and additions which are needed to accomplish a complete and efficient implementation. Examples of differential form calculations are displayed.

  11. Confectionery-based dose forms.

    PubMed

    Tangso, Kristian J; Ho, Quy Phuong; Boyd, Ben J

    2015-01-01

    Conventional dosage forms such as tablets, capsules and syrups are prescribed in the normal course of practice. However, concerns about patient preferences and market demands have given rise to the exploration of novel unconventional dosage forms. Among these, confectionery-based dose forms have strong potential to overcome compliance problems. This report will review the availability of these unconventional dose forms used in treating the oral cavity and for systemic drug delivery, with a focus on medicated chewing gums, medicated lollipops, and oral bioadhesive devices. The aim is to stimulate increased interest in the opportunities for innovative new products that are available to formulators in this field, particularly for atypical patient populations. PMID:25146440

  12. LES of High-Reynolds-Number Coanda Flow Separating from a Rounded Trailing Edge of a Circulation Control Airfoil

    NASA Technical Reports Server (NTRS)

    Nichino, Takafumi; Hahn, Seonghyeon; Shariff, Karim

    2010-01-01

    This slide presentation reviews the Large Eddy Simulation of a high reynolds number Coanda flow that is separated from a round trailing edge of a ciruclation control airfoil. The objectives of the study are: (1) To investigate detailed physics (flow structures and statistics) of the fully turbulent Coanda jet applied to a CC airfoil, by using LES (2) To compare LES and RANS results to figure out how to improve the performance of existing RANS models for this type of flow.

  13. Utilisation de la mélatonine pour le sommeil chez les enfants en bonne santé

    PubMed Central

    Janjua, Irvin; Goldman, Ran D.

    2016-01-01

    Résumé Question Une maman a amené son garçon de 12 ans me consulter à mon bureau. Elle s’inquiète, car il a de la difficulté à s’endormir presque tous les soirs. Elle travaille par quarts et elle prend elle-même de la mélatonine pour l’aider à s’endormir. Elle m’a demandé si son garçon pouvait aussi prendre de la mélatonine. Quels sont les recommandations et les éléments à considérer avant d’utiliser la mélatonine chez les enfants et les adolescents en bonne santé? Réponse L’insomnie est rapportée chez jusqu’à un quart des enfants en bonne santé et chez les trois quarts des enfants atteints d’une affection psychiatrique ou neurodéveloppementale, ce qui entraîne des conséquences négatives. Pour les enfants atteints du syndrome de retard de phase du sommeil, la mélatonine pourrait s’avérer utile lorsque jumelée à une évaluation de l’insomnie et à un suivi régulier. La mélatonine pourrait être envisagée pour des enfants sans diagnostic d’insomnie qui ont une bonne hygiène du sommeil. Bien qu’elle semble sans danger, il n’existe pas de données probantes en faveur de l’emploi systématique de la mélatonine chez les enfants en bonne santé.

  14. Superplastic forming of alloy 718

    SciTech Connect

    Smith, G.D.; Flower, H.L. )

    1994-04-01

    Inconel Alloy 718 (UNS N07718) is now available in a fine-grained, controlled composition modification that can be super-plastically formed. The new superplastic forming (SPF) capability allows the manufacture of large, complex, and detailed parts, which improves integrity by reducing the need for joining. Furthermore, it allows designers to fabricate components having higher strength, fatigue resistance, and temperature capability than parts made of aluminum or titanium alloys.

  15. Method of forming pointed structures

    NASA Technical Reports Server (NTRS)

    Pugel, Diane E. (Inventor)

    2011-01-01

    A method of forming an array of pointed structures comprises depositing a ferrofluid on a substrate, applying a magnetic field to the ferrofluid to generate an array of surface protrusions, and solidifying the surface protrusions to form the array of pointed structures. The pointed structures may have a tip radius ranging from approximately 10 nm to approximately 25 micron. Solidifying the surface protrusions may be carried out at a temperature ranging from approximately 10 degrees C. to approximately 30 degrees C.

  16. Method for forming metal contacts

    SciTech Connect

    Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

    2013-09-17

    Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

  17. Numerical Study of High-Temperature Jet Flow Using RANS/LES and PANS Formulations

    NASA Technical Reports Server (NTRS)

    Abdol-Hamid, Khaled S.; Elmiligui, Alaa

    2005-01-01

    Two multi-scale-type turbulence models are implemented in the PAB3D solver. The models are based on modifying the Reynolds Averaged Navier-Stokes (RANS) equations. The first scheme is a hybrid RANS/LES model utilizing the two-equation (k(epsilon)) model with a RANS/LES transition function dependent on grid spacing and the computed turbulence length scale. The second scheme is a modified version of the Partially Averaged Navier-Stokes (PANS) model, where the unresolved kinetic energy parameter (f(sub k)) is allowed to vary as a function of grid spacing and the turbulence length scale. This parameter is estimated based on a novel two-stage procedure to efficiently estimate the level of scale resolution possible for a given flow on a given grid for Partial Averaged Navier-Stokes (PANS). It has been found that the prescribed scale resolution can play a major role in obtaining accurate flow solutions. The parameter f(sub k) varies between zero and one and equal to one in the viscous sub layer, and when the RANS turbulent viscosity becomes smaller than the LES viscosity. The formulation, usage methodology, and validation examples are presented to demonstrate the enhancement of PAB3D's time-accurate and turbulence modeling capabilities. The accurate simulations of flow and turbulent quantities will provide valuable tool for accurate jet noise predictions. Solutions from these models are compared to RANS results and experimental data for high-temperature jet flows. The current results show promise for the capability of hybrid RANS/LES and PANS in simulating such flow phenomena.

  18. STS-56 Commander Cameron, in LES, with sky genie during JSC egress training

    NASA Technical Reports Server (NTRS)

    1992-01-01

    STS-56 Discovery, Orbiter Vehicle (OV) 103, Commander Kenneth Cameron, wearing launch and entry suit (LES), gives the sky-genie escape device a tug as training instructor Kenneth D. Trujillo holds it in position and explains its operation. Cameron, along with the other STS-56 crewmembers, is briefed on emergency egress procedures at JSC's Mockup and Integration Laboratory (MAIL) Bldg 9NE prior to a training simulation. The sky-genie is carried on all Space Shuttle flights for emergency egress purposes.

  19. STS-57 Commander Grabe, in LES, listens to egress briefing at JSC's MAIL

    NASA Technical Reports Server (NTRS)

    1993-01-01

    STS-57 Endeavour, Orbiter Vehicle (OV) 105, Commander Ronald J. Grabe, wearing launch and entry suit (LES), listens to emergency egress briefing prior to a simulation in JSC's Crew Compartment Trainer (CCT) located in the Mockup and Integration Laboratory (MAIL) Bldg 9NE. Grabe, along with other STS-57 crewmembers, is familiarizing himself with the procedures necessary in the event of an emergency during launch or landing aboard the space shuttle.

  20. STS-57 MS4 Voss, in LES, sits on CCT middeck during JSC egress training

    NASA Technical Reports Server (NTRS)

    1993-01-01

    STS-57 Endeavour, Orbiter Vehicle (OV) 105, Mission Specialist 4 (MS4) Janice E. Voss, wearing launch and entry suit (LES) and launch and entry helmet (LEH), listens to communications as she sits on the middeck of JSC's Crew Compartment Trainer (CCT), a space shuttle mockup. Voss, along with the other STS-57 crewmembers, is participating in side hatch emergency egress training. In the background, training instructors look on. The CCT is located in JSC's Mockup and Integration Laboratory (MAIL) Bldg 9NE.

  1. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    SciTech Connect

    Steve Cannon; Virgil Adumitroaie; Keith McDaniel; Cliff Smith

    2001-05-01

    Further development of a Large Eddy Simulation (LES) code for the design of advanced gaseous combustion systems is described in this second quarterly report. CFD Research Corporation (CFDRC) is developing the LES module within the parallel, unstructured solver included in the commercial CFD-ACE+ software. CFDRC has implemented and tested Smagorinsky and localized dynamic subgrid turbulence models on a 2.1 million cell DOE-NETL combustor case and a 400,000 cell nonreacting backstep case. Both cases showed good agreement between predicted and experimental results. The large DOE-NETL case results provided better agreement with the measured oscillation frequency than previous attempts because massive parallel computing (on a cluster of 24 pcs) allowed the entire computational domain, including the swirler vanes and fuel spokes, to be modeled. Subgrid chemistry models, including the conditional moment closure (CMC) and linear eddy model (LEM), are being tested and implemented. Reduced chemical mechanisms have been developed for emissions, ignition delay, extinction, and flame propagation using a computer automated reduction method (CARM). A 19-species natural gas mechanism, based on GRI2.11 and Miller-NO{sub x}, was shown to predict rich NO{sub x} emissions better than any previously published mechanisms. The ability to handle this mechanism in CFD-ACE+ was demonstrated by implementing operator splitting and a stiff ODE solver (DVODE). Efficient tabulation methods, including in situ adaptation and artificial neural nets, are being studied and will be implemented in the LES code. The LES combustion code development and testing is on schedule. Next quarter, initial results (including the DOE-NETL unstable combustor) with the CMC and LEM subgrid chemistry models will be completed and summarized.

  2. STS-52 Pilot Baker, in LES/LEH, during JSC WETF bailout exercises

    NASA Technical Reports Server (NTRS)

    1992-01-01

    STS-52 Columbia, Orbiter Vehicle (OV) 102, Pilot Michael A. Baker smiles from under his launch and entry helmet (LEH) and from behind the communications carrier assembly (CCA) microphones as he adjusts his parachute harness. Baker, fully outfitted in a launch and entry suit (LES), prepares for emergency egress (bailout) training exercise in JSC's Weightless Environment Training Facility (WETF) Bldg 29 pool. The WETF's 25-ft deep pool will be used in this simulation of a water landing.

  3. STS-52 Pilot Baker, in LES, dons parachute during JSC WETF bailout exercises

    NASA Technical Reports Server (NTRS)

    1992-01-01

    STS-52 Columbia, Orbiter Vehicle (OV) 102, Pilot Michael A. Baker is assisted with a training version of his Shuttle partial-pressure launch and entry suit (LES). A technician adjusts his parachute harness prior to the emergency egress (bailout) training exercise in JSC's Weightless Environment Training Facility (WETF) Bldg 29 pool. The WETF's 25-ft deep pool will be used in this simulation of a water landing.

  4. Les pneumopathies nosocomiales en réanimation de CHU Hassan II de Fès

    PubMed Central

    Shimi, Abdelkarim; Touzani, Soumaya; Elbakouri, Nabil; Bechri, Brahim; Derkaoui, Ali; Khatouf, Mohammed

    2015-01-01

    L'objectif principal de notre étude était d'identifier les bactéries incriminées dans la pneumopathie nosocomiale (PN) au service de réanimation A1 du CHU Hassan II de Fès, en vue d'en améliorer la prise en charge et de diminuer la morbi-mortalité associée. Il s'agit d'une étude rétrospective et descriptive, menée du 1er janvier 2012 au 31 décembre 2013. Seules les infections pulmonaires survenant au-delà de 48 heures de l'admission du patient au service de réanimation ont été incluses. L'incidence de la PN était de 11,2%. Les Bacilles à Gram négatif (BGN) étaient retrouvés dans 48,5% des cas, le Staphylocoque Aureus dans 21,21% des cas et le Klebsiella Pneumoniae était dans 10,7% des cas. Le taux de mortalité était de 48,33%. L’âge, la gravité de la pathologie sous jacente et le retard de l'instauration d'une antibiothérapie adaptée étaient considérées comme facteurs de mauvais pronostic. L’étude de la résistance aux antibiotiques, montre une multirésistance surtout pour les BGN, dont il faut tenir compte en mettant en place une stratégie de prévention active. PMID:26966481

  5. STS-49 MS Thornton, in LES, at the CCT side hatch during JSC egress exercises

    NASA Technical Reports Server (NTRS)

    1992-01-01

    STS-49 Endeavour, Orbiter Vehicle (OV) 105, Mission Specialist (MS) Kathryn C. Thornton, wearing launch and entry suit (LES) and with foot propped on open side hatch, prepares to enter JSC's Crew Compartment Trainer (CCT) located in the Mockup and Integration Laboratory (MAIL) Bldg 9. Thornton along with other STS-49 crewmembers is participating in post-landing emergency egress training. Photo taken by NASA JSC contract photographer Mark Sowa.

  6. TRANSIENT LOWER ESOPHAGEAL SPHINCTER RELAXATION IN ACHALASIA: EVERYTHING BUT LES RELAXATION

    PubMed Central

    KWIATEK, Monika A.; POST, Jennifer; PANDOLFINO, John E.; KAHRILAS, Peter J.

    2009-01-01

    Background: In conducting clinical high resolution esophageal pressure topography (HREPT) studies we observed that after subjects sat upright between series of supine and upright test swallows, they frequently had a transient lower esophageal sphincter relaxation (tLESR). When achalasia patients were studied in the same protocol, they exhibited a similar HREPT event leading to the hypothesis that achalasics had incomplete tLESRs. Methods: We reviewed clinical HREPT studies of 94 consecutive non-achalasics and 25 achalasics. Studies were analyzed for a tLESR-like event during the study and, when observed, that tLESR-like event was characterized for the degree and duration of distal esophageal shortening, the degree of LES relaxation, associated crural diaphragm (CD) inhibition, esophageal pressurization, and upper esophageal sphincter (UES) relaxation. Results: 64/94 (68%) non-achalasics and 15/24 (63%) of achalasics had a pressure topography event after the posture change characterized by a prolonged period of distal esophageal shortening and/or LES relaxation. Events among the non-achalasics and achalasics were similar in terms of magnitude and duration of shortening and all were associated with CD inhibition. Similar proportions had associated non-deglutitive UES relaxations. The only consistent differences were the absence of associated LES relaxation and the absence of HREPT evidence of reflux among the achalasics leading us to conclude that their events were incomplete tLESRs. Conclusions: Achalasic patients exhibit a selective defect in the tLESR response suggesting preservation of all sensory, central, and efferent aspects of the requisite neural substrate with the notable exception of LES relaxation, a function of inhibitory (nitrergic) myenteric plexus neurons. PMID:19552630

  7. STS-48 crewmembers don their LES boots prior to JSC emergency egress training

    NASA Technical Reports Server (NTRS)

    1991-01-01

    STS-48 Discovery, Orbiter Vehicle (OV) 103, Commander John O. Creighton (left) and Pilot Kenneth D. Reightler, wearing launch and entry suits (LESs) sit while technicians help them don their boots. The crewmembers are donning the LES attire in preparation for post-landing emergency egress exercises. When suited the crewmembers will board JSC's Full Fuselage Trainer (FFT), a space shuttle mockup, for the simulation. The FFT is located in the Mockup and Integration Laboratory Bldg 9A.

  8. Form 6 - gas balancing agreement

    SciTech Connect

    Not Available

    1990-01-01

    In 1988, a special Committee of the Rocky Mountain Mineral Law Foundation undertook a project to draft a model from gas balancing agreement. This project was initiated at the request of a number of Foundation members who felt that a model form gas balancing agreement would facilitate the negotiation of operating agreement, since gas balancing issues had become sticking points in the process. The Committee was composed of attorneys representing a wide cross-section of the oil and gas industry including both major and independent oil companies, production companies with interstate pipeline affiliates, and private practitioners. The Committee attempted to address the more controversial issues in gas balancing with optional provisions in the Form. To facilitate the negotiation process, the number of optional provisions was minimized. This form may be used as an Appendix to the new A.A.P.L. Form 610-1989 Model Form Operating Agreement. This book includes provision of this Form which are: Ownership of gas production; Balancing of production accounts; Cash balancing upon depletion; Deliverability tests; Nominations; Statements; Payment of taxes; Operating expenses; Overproducing allowable; Payment of leasehold burdens; Operator's liability; Successors and assigns; Audits; Arbitration; and Operator's fees.

  9. Superplastic forming of ceramic insulation

    NASA Technical Reports Server (NTRS)

    Nieh, T. G.; Wittenauer, J. P.; Wadsworth, J.

    1992-01-01

    Superplasticity has been demonstrated in many fine-grained structural ceramics and ceramic composites, including yttria-stabilized tetragonal zirconia polycrystal (YTZP), alumina, and Al2O3-reinforced zirconia (Al2O3/YTZ) duplex composites and SiC-reinforced Si3N4. These superplastic ceramics obviously offer the potential benefit of forming net shape or near net shape parts. This could be particularly useful for forming complicated shapes that are difficult to achieve using conventional forming techniques, or require elaborate, subsequent machining. In the present study, we successfully demonstrated the following: (1) superplastic 3Y-TXP and 20 percent Al2O3/YTZ composite have for the first time been successfully deformed into hemispherical caps via a biaxial gas-pressure forming technique; (2) no experimental difficulty was encountered in applying the required gas pressures and temperatures to achieve the results, thus, it is certain that higher rates of deformation than those presented in this study will be possible by using the current test apparatus at higher temperatures and pressures; and (3) an analytical model incorporating material parameters, such as variations during forming in the strain rate sensitivity exponent and grain growth-induced strain hardening, is needed to model accurately and therefore precisely control the biaxial gas-pressure forming of superplastic ceramics. Based on the results of this study, we propose to fabricate zirconia insulation tubes by superplastic extrusion of zirconia polycrystal. This would not only reduce the cost, but also improve the reliability of the tube products.

  10. INEL spray-forming research

    SciTech Connect

    McHugh, K.M.; Key, J.F.

    1992-12-31

    Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing without sacrificing, and oftentimes substantially improving, product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offers property improvements resulting from rapid solidification (e.g. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials. Results from several spray-forming programs are presented to illustrate the range of capabilities of the technique as well as the accompanying technical and economic benefits. Low-carbon steel strip >0.75 mm thick and polymer membranes for gas/gas and liquid/liquid separations that were spray formed are discussed; recent advances in spray forming molds, dies, and other tooling using low-melting-point metals are described.

  11. INEL Spray-forming Research

    NASA Technical Reports Server (NTRS)

    Mchugh, Kevin M.; Key, James F.

    1993-01-01

    Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing without sacrificing, and oftentimes substantially improving, product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offers property improvements resulting from rapid solidification (e.g., refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials. Results from several spray forming programs are presented to illustrate the range of capabilities of the technique as well as the accompanying technical and economic benefits. Low-carbon steel strip greater than 0.75 mm thick and polymer membranes for gas/gas and liquid/liquid separations that were spray formed are discussed; recent advances in spray forming molds, dies, and other tooling using low-melting-point metals are described.

  12. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    SciTech Connect

    Steve Cannon; Virgil Adumitroaie; Keith McDaniel; Cliff Smith

    2001-10-01

    Further development of a combustion Large Eddy Simulation (LES) code for the design of advanced gaseous combustion systems is described in this fourth quarterly report. CFD Research Corporation (CFDRC) is developing the LES module within the parallel, unstructured solver included in the commercial CFD-ACE+ software. In this quarter, in-situ adaptive tabulation (ISAT) for efficient chemical rate storage and retrieval was further tested in the LES code. A more efficient PK binary tree data structure is being developed and implemented to replace the original BSP-tree structure. Implementation of the Linear Eddy Model (LEM) for subgrid chemistry has also started. In addition, Georgia Tech has shown that a chemical neural net (1-step chemistry) trained at certain turbulent conditions can be used at different turbulent conditions without expensive chemical kinetic integrations. Initial evaluations of the code accuracy have also been carried out. The evaluations cases included the unstable DOE-NETL combustor and a lid-driven cavity. Next quarter, the ISAT algorithm for efficient chemistry will be tested for the unstable DOE-NETL combustor. Initial flame calculations, with the LEM subgrid chemistry model are planned. Also, demonstration of the neural net approach, for chemical kinetics speed-up, should be demonstrated for more advanced chemistry (8-species and 19-species mechanisms).

  13. Numerical simulations of industrial-scale combustion chamber - LES versus RANS

    NASA Astrophysics Data System (ADS)

    Kwiatkowski, Kamil; Jasiński, Daniel; Bajer, Konrad

    2011-12-01

    In this work we focus on the simulation of the process of biomass syngas combustion in the industrial combustion chamber directly linked with gasification chamber, where this gas is continuously producing from the biomass. Conflicting demands from the engineers to have rapid results and hints how to ensure the best conditions for combustion of this particular fuel and to lower the emission of pollutants, with simultaneously deep view inside the process and its stability motivates us to use both the RANS and LES techniques of turbulence modelling, compare it and take their advantages. We designed and performed series of 3D numerical simulations of both cold flow and combustion in complex geometry of industrial burner. It seems to us that the proper approach for modelling of biomass syngas combustion is steady flamelets model. Simulations performed with RANS closure are used as the initialisation of LES models, but their main goal is to predict the long-time oscillation of pressure and temperature observed in the working combustion chamber. On the other hand the main goal of the simulations with LES closure is to predict the proper level of short-time behaviour of the flame and local phenomena.

  14. The LES of the channel flow in a non aligned system of coordinates

    NASA Astrophysics Data System (ADS)

    Germano, Massimo; Abbà, Antonella

    2010-11-01

    The plane channel flow continues to be a very important test case for the verification and the validation of LES. In the channel flow test there is a privileged direction, usually one reference axis is oriented along the stream and the size of the computational box is increased in the streamwise direction in order to capture correctly the dominant turbulent structures and to produce a fully developed flow. All that is peculiar of this particular test, and in this paper we will investigate the sensitivity of the channel test to the particular alignment of the coordinate system with the mean flow. In a non aligned system of coordinates there is no privileged direction, there are two components of the forcing term, the mean pressure gradient, and the homogeneities of the Reynolds stresses are destroyed. In our paper we simulate the channel flow in a rotated system of coordinates, and we compare the results with the stream aligned data. We think that this test could evidence the flexibility of different LES codes and LES subgrid models to simulate the turbulent flow and to capture the correct statistical values in non aligned conditions. The first preliminary results are slightly contradictory: the resolved Reynolds stresses seem degraded while the mean flow is better predicted. The dynamic anisotropic subgrid model of Abbà, Cercignani and Valdettaro seems well fitted to represent correctly the large scales in non aligned conditions.

  15. LES on Plume Dispersion in the Convective Boundary Layer Capped by a Temperature Inversion

    NASA Astrophysics Data System (ADS)

    Nakayama, Hiromasa; Tamura, Tetsuro; Abe, Satoshi

    Large-eddy simulation (LES) is applied to the problem of plume dispersion in the spatially-developing convective boundary layer (CBL) capped by a temperature inversion. In order to generate inflow turbulence with buoyant forcing, we first, simulate the neutral boundary layer flow (NBL) in the driver region using Lund's method. At the same time, the temperature profile possessing the inversion part is imposed at the entrance of the driver region and the temperature field is calculated as a passive scalar. Next, the buoyancy effect is introduced into the flow field in the main region. We evaluate the applicability of the LES model for atmospheric dispersion in the CBL flow and compare the characteristics of plume dispersion in the CBL flow with those in the neutral boundary layer. The Richardson number based on the temperature increment across the inversion obtained by the present LES model is 22.4 and the capping effect of the temperature inversion can be captured qualitatively in the upper portion of the CBL. Characteristics of flow and temperature fields in the main portion of CBL flow are similar to those of previous experiments[1],[2] and observations[3]. Concerning dispersion behavior, we also find that mean concentrations decrease immediately above the inversion height and the peak values of r.m.s concentrations are located near the inversion height at larger distances from the point source.

  16. Les succédanés du sucre durant la grossesse

    PubMed Central

    Pope, Eliza; Koren, Gideon; Bozzo, Pina

    2014-01-01

    Résumé Question J’ai une patiente enceinte qui consomme souvent des succédanés du sucre et elle m’a demandé si cette pratique continue pouvait nuire à sa grossesse ou à son enfant. Que devrais-je lui répondre et existe-t-il d’autres meilleurs choix durant la grossesse? Réponse Il faudrait faire plus de recherche pour déterminer plus exactement les effets de l’exposition aux succédanés du sucre in utero, mais les données disponibles ne laissent pas présager d’effets indésirables durant la grossesse. Toutefois, il est recommandé de consommer des substituts du sucre en quantités modérées et de se conformer aux doses journalières admissibles établies par les organismes de règlementation.

  17. LES of Temporally Evolving Mixing Layers by an Eighth-Order Filter Scheme

    NASA Technical Reports Server (NTRS)

    Hadjadj, A; Yee, H. C.; Sjogreen, B.

    2011-01-01

    An eighth-order filter method for a wide range of compressible flow speeds (H.C. Yee and B. Sjogreen, Proceedings of ICOSAHOM09, June 22-26, 2009, Trondheim, Norway) are employed for large eddy simulations (LES) of temporally evolving mixing layers (TML) for different convective Mach numbers (Mc) and Reynolds numbers. The high order filter method is designed for accurate and efficient simulations of shock-free compressible turbulence, turbulence with shocklets and turbulence with strong shocks with minimum tuning of scheme parameters. The value of Mc considered is for the TML range from the quasi-incompressible regime to the highly compressible supersonic regime. The three main characteristics of compressible TML (the self similarity property, compressibility effects and the presence of large-scale structure with shocklets for high Mc) are considered for the LES study. The LES results using the same scheme parameters for all studied cases agree well with experimental results of Barone et al. (2006), and published direct numerical simulations (DNS) work of Rogers & Moser (1994) and Pantano & Sarkar (2002).

  18. Investigations of vortex-cylinder mechanism of interaction using URANS and LES

    NASA Astrophysics Data System (ADS)

    Ilie, Marcel

    2007-11-01

    Numerical simulations of a single vortex superimposed on a uniform flow past a circular cylinder were performed using both unsteady Reynolds-averaged Navier-Stokes equations (URANS) and large eddy simulation (LES) techniques for relatively high Reynolds number flows, Re = 1.4x10^6. Vortex-structure interaction flow phenomena are very common in many engineering applications, such as aircraft at high angle of attack, flow past landing gear, blade-vortex interaction for rotorcraft, etc. The vortex-structure interaction phenomenon is of critical importance due to the inheriting danger associated with the vortex induced vibrations. In the present analysis, parametric investigations were performed for different test cases, based on both the vortex-cylinder horizontal miss distance and the sense of vortex rotation. The URANS approach fails to accurately predict the unsteady flow field due to excessive dissipation. The LES technique provides a promising tool for obtaining the unsteady wall-pressure fields, aerodynamic coefficients and the acoustic source functions. From the present analysis using LES, it was observed that the presence of the vortex in the flow field causes an increase of the Strouhal number value. Also, the present analysis showed that the vortex-cylinder horizontal miss-distance influences the mechanism of interaction and implicitly the aerodynamic coefficients.

  19. Les neuropeptides gastro-intestinaux cibles des effets des rayonnements ionisants : altérations fonctionnelles

    NASA Astrophysics Data System (ADS)

    Linard, C.; Esposito, V.; Wysocki, J.; Griffiths, N. M.

    1998-04-01

    The symptoms associated with exposure to ionizing radiation are nausea, vomiting, diarrhoea. The response of the gut is complex involving modifications of motility and fluid and electrolyte transport. Gastrointestinal regulatory peptides have an important role in these functions. This study showed that radiation-induced tissue variations of neuropeptides have some repercussions on intestinal biological activity of these peptides soon after irradiation. In addition such modifications are also seen a few years after irradiation. Les symptômes associés à l'exposition aux rayonnements ionisants sont des nausées, vomissements et diarrhées. La réponse du système digestif est complexe, impliquant des modifications de la motilité et du transport d'eau et d'électrolytes. les neuropeptides gastro-intestinaux ont un rôle important dans ces fonctions. Cette étude montre que les variations tissulaires de ces neuropeptides induites par l'irradiation ont des répercussions sur l'activité biologique intestinale pour des temps précoces mais que ces perturbations sont encore visibles quelques années après l'irradiation.

  20. A multivariate quadrature based approach for LES based supersonic combustion modeling

    NASA Astrophysics Data System (ADS)

    Donde, Pratik; Koo, Heeseok; Raman, Venkat

    2010-11-01

    The direct quadrature method of moments (DQMOM) was developed to solve high-dimensional probability density function (PDF) equations that arise in the description of turbulent combustion. This method is particularly useful in shock-containing supersonic internal flows such as those encountered in scramjet engines. In the DQMOM approach, the PDF is described in terms of a finite number of weighted delta functions whose weights and locations in composition space are obtained by solving specific transport equations. Since this approach is fully Eulerian in nature, it is advantageous compared to conventional Lagrangian methods used for solving the PDF transport equation. However, implementation of this formulation in the context of the large eddy simulation (LES) methodology leads to large numerical errors. For instance, the high-resolution numerical schemes used in LES lead to non-realizable and diffusive evolution of the DQMOM equations. Here, we propose a novel semi-discrete quadrature method of moments (SeQMOM) that overcomes this problem. A decoupling procedure is used to extend this method to multivariate PDF descriptions. The numerical implementation in LES as well as validation exercises will be presented.

  1. A multivariate quadrature based moment method for LES based modeling of supersonic combustion

    NASA Astrophysics Data System (ADS)

    Donde, Pratik; Koo, Heeseok; Raman, Venkat

    2012-07-01

    The transported probability density function (PDF) approach is a powerful technique for large eddy simulation (LES) based modeling of scramjet combustors. In this approach, a high-dimensional transport equation for the joint composition-enthalpy PDF needs to be solved. Quadrature based approaches provide deterministic Eulerian methods for solving the joint-PDF transport equation. In this work, it is first demonstrated that the numerical errors associated with LES require special care in the development of PDF solution algorithms. The direct quadrature method of moments (DQMOM) is one quadrature-based approach developed for supersonic combustion modeling. This approach is shown to generate inconsistent evolution of the scalar moments. Further, gradient-based source terms that appear in the DQMOM transport equations are severely underpredicted in LES leading to artificial mixing of fuel and oxidizer. To overcome these numerical issues, a semi-discrete quadrature method of moments (SeQMOM) is formulated. The performance of the new technique is compared with the DQMOM approach in canonical flow configurations as well as a three-dimensional supersonic cavity stabilized flame configuration. The SeQMOM approach is shown to predict subfilter statistics accurately compared to the DQMOM approach.

  2. Assessment of subgrid scalar dissipation models for LES of reacting flows

    NASA Astrophysics Data System (ADS)

    Sun, O. S.; Su, L. K.

    2004-11-01

    Large eddy simulation (LES) of non-premixed combustion requires accurate determination of not only resolved-scale scalar transport, but also species mixture fractions at the subgrid level. In particular, LES of reacting flows requires information on the subgrid scale (SGS) scalar dissipation. Several approaches have been taken to modeling the SGS scalar dissipation. Included among these is a gradient-based model developed using a local equilibrium assumption,(Pierce, C. and Moin, P. phPhys. Fluids) 10, 3041 (1998) a model based on a mechanical-to-scalar time scale ratio assumption,(Jiménez, C. phet al.) phPhys. Fluids 13, 1748 (2001) and a scale similarity-type model.(Chumakov, S. and Rutland, C. phAIAA J.) 42, 1132 (2004) The present objective is to examine the fundamental physical assumptions in the models, and to identify major factors influencing model performance. The models are evaluated pha priori using planar experimental measurements of velocity and mixing fields in an axisymmetric, turbulent co-flowing jet. Correlation coefficients and mean relative error between exact and modeled quantities are used to quantify the structural and statistical accuracy of the models. Spatial profiles of production and dissipation of SGS scalar variance, and of mechanical and scalar mixing time scales, are analyzed to examine local equilibrium and time-scale proportionality hypotheses, for example. The sensitivity of model behavior to parameters such as Reynolds number and LES filter type and size is studied as well.

  3. Unstructured LES of Reacting Multiphase Flows in Realistic Gas Turbine Combustors

    NASA Technical Reports Server (NTRS)

    Ham, Frank; Apte, Sourabh; Iaccarino, Gianluca; Wu, Xiao-Hua; Herrmann, Marcus; Constantinescu, George; Mahesh, Krishnan; Moin, Parviz

    2003-01-01

    As part of the Accelerated Strategic Computing Initiative (ASCI) program, an accurate and robust simulation tool is being developed to perform high-fidelity LES studies of multiphase, multiscale turbulent reacting flows in aircraft gas turbine combustor configurations using hybrid unstructured grids. In the combustor, pressurized gas from the upstream compressor is reacted with atomized liquid fuel to produce the combustion products that drive the downstream turbine. The Large Eddy Simulation (LES) approach is used to simulate the combustor because of its demonstrated superiority over RANS in predicting turbulent mixing, which is central to combustion. This paper summarizes the accomplishments of the combustor group over the past year, concentrating mainly on the two major milestones achieved this year: 1) Large scale simulation: A major rewrite and redesign of the flagship unstructured LES code has allowed the group to perform large eddy simulations of the complete combustor geometry (all 18 injectors) with over 100 million control volumes; 2) Multi-physics simulation in complex geometry: The first multi-physics simulations including fuel spray breakup, coalescence, evaporation, and combustion are now being performed in a single periodic sector (1/18th) of an actual Pratt & Whitney combustor geometry.

  4. Parallel FEM LES with one-equation subgrid-scale model for incompressible flows

    NASA Astrophysics Data System (ADS)

    Li, Xian-Xiang; Liu, Chun-Ho; Leung, Dennis Y. C.

    2010-01-01

    This article develops a parallel large-eddy simulation (LES) with a one-equation subgrid-scale (SGS) model based on the Galerkin finite element method and three-dimensional (3D) brick elements. The governing filtered Navier-Stokes equations were solved by a second-order accurate fractional-step method, which decomposed the implicit velocity-pressure coupling in incompressible flow and segregated the solution to the advection and diffusion terms. The transport equation for the SGS turbulent kinetic energy was solved to calculate the SGS processes. This FEM LES model was applied to study the turbulence of the benchmark open channel flow at a Reynolds number Reτ = 180 (based on the friction velocity and channel height) using different model constants and grid resolutions. By comparing the turbulence statistics calculated by the current model with those obtained from direct numerical simulation (DNS) and experiments in literature, an optimum set of model constants for the current FEM LES model was established. The budgets of turbulent kinetic energy and vertical Reynolds stress were then analysed for the open channel flow. Finally, the flow structures were visualised to further reveal some important characteristics. It was demonstrated that the current model with the optimum model constants can predict well the organised structure near the wall and free surface, and can be further applied to other fundamental and engineering applications.

  5. Analyse de la motivation pour les mathematiques d'eleves du secondaire participant a une activite de programmation informatique

    NASA Astrophysics Data System (ADS)

    Ouellette, Jean-Michel

    Au Quebec, le decrochage scolaire cause par un manque de motivation de la part des eleves est une preoccupation actuelle. Dans une societe de savoirs ou les technologies prennent une place de plus en plus grande, il apparait important d'explorer toutes les pistes de travail quant a l'amelioration de la motivation scolaire des jeunes. Plus precisement, sachant qu'il existe des liens concrets entre la programmation informatique et les mathematiques, nous avons analyse l'apport possible de l'apprentissage de la programmation informatique a la motivation pour l'apprentissage des mathematiques. Trois eleves de troisieme secondaire ont participe a cette etude multicas. Selon les resultats d'analyse, tous les eleves ont vecu une amelioration de leur motivation a apprendre les mathematiques. A la lumiere de l'analyse de ces resultats, nous proposons une explication relativement aux liens possibles entre la participation des eleves a une activite parascolaire de programmation informatique et l'amelioration de leur motivation pour l'apprentissage des mathematiques.

  6. La prévention de l’étouffement et de la suffocation chez les enfants

    PubMed Central

    Cyr, Claude

    2012-01-01

    RÉSUMÉ L’étouffement, la suffocation et la strangulation sont responsables de graves blessures non intentionnelles chez les enfants et constituent des causes importantes de décès non intentionnels chez les nourrissons et les tout-petits. Presque la totalité des décès et des blessures attribuables à un étouffement, une suffocation ou une strangulation sont évitables. Le présent document de principes traite des définitions, de l’épidémiologie et des stratégies de prévention efficaces de ces blessures. Des recommandations qui combinent des démarches pour améliorer la sécurité, incluant des recherches, de la surveillance, des lois et des normes, la conception des produits et l’éducation, sont présentées. Les dispensateurs de soins pédiatriques devraient encourager les parents et autres personnes qui s’occupent d’enfants à apprendre la réanimation cardiorespiratoire (RCR) et les premiers soins en cas d’étouffement, et leur offrir des conseils préventifs adaptés à l’âge de leur enfant lors des bilans de santé réguliers afin de prévenir ces blessures.

  7. Conjoint Forming - Technologies for Simultaneous Forming and Joining

    NASA Astrophysics Data System (ADS)

    Groche, P.; Wohletz, S.; Mann, A.; Krech, M.; Monnerjahn, V.

    2016-03-01

    The market demand for new products optimized for e. g. lightweight applications or smart components leads to new challenges in production engineering. Hybrid structures represent one promising approach. They aim at higher product performance by using a suitable combination of different materials. The developments of hybrid structures stimulate the research on joining of dissimilar materials. Since they allow for joining dissimilar materials without external heating technologies based on joining by plastic deformation seem to be of special attractiveness. The paper at hand discusses the conjoint forming approach. This approach combines forming and joining in one process. Two or more workpieces are joined while at least one workpiece is plastically deformed. After presenting the fundamental joining mechanisms, the conjoint forming approach is discussed comprehensively. Examples of conjoint processes demonstrate the effectiveness and reveal the underlying phenomena.

  8. Investigation of Unsteady Tip Clearance Flow in a Low-Speed One and Half Stage Axial Compressor with LES And PIV

    NASA Technical Reports Server (NTRS)

    Hah, Chunill; Hathaway, Michael; Katz, Joseph; Tan, David

    2015-01-01

    The primary focus of this paper is to investigate how a rotor's unsteady tip clearance flow structure changes in a low speed one and half stage axial compressor when the rotor tip gap size is increased from 0.5 mm (0.49% of rotor tip blade chord, 2% of blade span) to 2.4 mm (2.34% chord, 4% span) at the design condition are investigated. The changes in unsteady tip clearance flow with the 0.62 % tip gap as the flow rate is reduced to near stall condition are also investigated. A Large Eddy Simulation (LES) is applied to calculate the unsteady flow field at these three flow conditions. Detailed Stereoscopic PIV (SPIV) measurements of the current flow fields were also performed at the Johns Hopkins University in a refractive index-matched test facility which renders the compressor blades and casing optically transparent. With this setup, the unsteady velocity field in the entire flow domain, including the flow inside the tip gap, can be measured. Unsteady tip clearance flow fields from LES are compared with the PIV measurements and both LES and PIV results are used to study changes in tip clearance flow structures. The current study shows that the tip clearance vortex is not a single structure as traditionally perceived. The tip clearance vortex is formed by multiple interlaced vorticities. Therefore, the tip clearance vortex is inherently unsteady. The multiple interlaced vortices never roll up to form a single structure. When phased-averaged, the tip clearance vortex appears as a single structure. When flow rate is reduced with the same tip gap, the tip clearance vortex rolls further upstream and the tip clearance vortex moves further radially inward and away from the suction side of the blade. When the tip gap size is increased at the design flow condition, the overall tip clearance vortex becomes stronger and it stays closer to the blade suction side and the vortex core extends all the way to the exit of the blade passage. Measured and calculated unsteady flow

  9. Acceptance of Ideas of Others [Number Form and Star Form].

    ERIC Educational Resources Information Center

    Masters, James R.; Laverty, Grace E.

    As part of the instrumentation to assess the effectiveness of the Schools Without Failure (SWF) program in 10 elementary schools in the New Castle, Pa. School District, the Acceptance of Ideas of Others (Number and Star Forms) were developed to determine pupils' attitudes toward classmates. Given a list of all class members, pupils are asked to…

  10. Form und Sinn: Sprachwissenschaftliche Betrachtungen (Form and Meaning: Linguistic Observations).

    ERIC Educational Resources Information Center

    Jakobson, Roman

    This collection of 14 papers and articles by Roman Jakobson contains works written and published between 1931 and 1970 which deal either with global aspects of language or with specific grammatical issues. The collection emphasizes Jakobson's concern for finding the links between form and meaning in language. The text is entirely in German with…

  11. Sixth-Form Colleges: An Endangered Organisational Form?

    ERIC Educational Resources Information Center

    Stoten, David William

    2014-01-01

    The sixth-form college sector is often marginalised in policy and academic discourse, where the much larger school and further education sectors dominate. This paper sets out to describe the sector's key features, assess its position within the wider education system and consider its future in an increasingly competitive education market. The…

  12. Les tumeurs conjonctives cutanées: à propos de 121 cas

    PubMed Central

    Hazmiri, Fatima Ezzahra; Fakhri, Anas; Rais, Hanane; Akhdari, Nadia; Amal, Said; Belaabidia, Badia

    2014-01-01

    Les tumeurs conjonctives cutanées sont des tumeurs dermiques et/ou hypodermiques relativement fréquentes. Elles sont dominées par les tumeurs bénignes. A travers une série de 121 cas, nous avons étudié le profil épidémiologique, anatomopathologique et évolutif de ces tumeurs. C'est une étude rétrospective réalisée au service d'anatomie pathologique du CHU Mohammed VI de Marrakech entre 2004 et 2012. Il s'agit de 121 patients. La moyenne d’âge était de 36 ans (1-80ans). Le sex-ratio H/F était de 1,12. La tumeur avait un aspect nodulaire dans 90% des cas. Le membre inférieur était la localisation la plus fréquente (30,5%). L’étude anatomopathologique a porté sur un matériel biopsique dans 100% des cas. Soixante-neuf pour cent de ces tumeurs étaient bénignes. Elles étaient représentées essentiellement par les tumeurs vasculaires, suivies par les tumeurs fibreuses et fibro-histiocytaires. Trente et un pour cent des tumeurs étaient malignes. Il s'agissait essentiellement de tumeurs fibreuses et fibro-histiocytaires, suivies de tumeurs vasculaires. L’étude immunohistochimique était réalisée dans 2cas. Le traitement chirurgical était entrepris dans 73% des cas. L’évolution était précisée dans 19% des cas avec une évolution favorable dans 13% des cas. Un cas de décès et 2 cas de récidive étaient notés. Les tumeurs conjonctives cutanées bénignes sont de bon pronostic, mais posent un problème majeur de nosologie et de classification. D'autre part, la prise en charge diagnostique et thérapeutique ainsi que l’évaluation pronostique des sarcomes cutanés restent difficiles. PMID:25379113

  13. Numerical dissipation control in high order shock-capturing schemes for LES of low speed flows

    NASA Astrophysics Data System (ADS)

    Kotov, D. V.; Yee, H. C.; Wray, A. A.; Sjögreen, B.; Kritsuk, A. G.

    2016-02-01

    The Yee & Sjögreen adaptive numerical dissipation control in high order scheme (High Order Filter Methods for Wide Range of Compressible Flow Speeds, ICOSAHOM 09, 2009) is further improved for DNS and LES of shock-free turbulence and low speed turbulence with shocklets. There are vastly different requirements in the minimization of numerical dissipation for accurate turbulence simulations of different compressible flow types and flow speeds. Traditionally, the method of choice for shock-free turbulence and low speed turbulence are by spectral, high order central or high order compact schemes with high order linear filters. With a proper control of a local flow sensor, appropriate amount of numerical dissipation in high order shock-capturing schemes can have spectral-like accuracy for compressible low speed turbulent flows. The development of the method includes an adaptive flow sensor with automatic selection on the amount of numerical dissipation needed at each flow location for more accurate DNS and LES simulations with less tuning of parameters for flows with a wide range of flow speed regime during the time-accurate evolution, e.g., time varying random forcing. An automatic selection of the different flow sensors catered to the different flow types is constructed. A Mach curve and high-frequency oscillation indicators are used to reduce the tuning of parameters in controlling the amount of shock-capturing numerical dissipation to be employed for shock-free turbulence, low speed turbulence and turbulence with strong shocks. In Kotov et al. (High Order Numerical Methods for LES of Turbulent Flows with Shocks, ICCFD8, Chengdu, Sichuan, China, July 14-18, 2014) the LES of a turbulent flow with a strong shock by the Yee & Sjögreen scheme indicated a good agreement with the filtered DNS data. A work in progress for the application of the adaptive flow sensor for compressible turbulence with time-varying random forcing is forthcoming. The present study examines the

  14. Long range lidar data processing for validating LES of wind turbine wakes

    NASA Astrophysics Data System (ADS)

    Trabucchi, D.; van Dooren, M.; Vollmer, L.; Schneemann, J.; Trujillo, J. J.; Witha, B.; Kühn, M.

    2014-12-01

    Scanning wind lidars offer the possibility to compare full-scale measurements in the wake of a wind turbine with LES wind fields calculated for the same test case. Due to the novelty and the peculiarity of lidar measurements, a comparison between experimental data and simulation results is non-trivial and several methods can be applied. This study presents validation methods for single and dual-doppler lidar measurements respectively.Consecutive azimuthal scans - commonly indicated as Plan Position Indicator (PPI) - at a low fixed elevation and centered on the wind turbine wake provide the radial wind speed, i.e. the wind component along the laser beam, on an almost flat polar grid. This data can be directly compared with the radial wind speed evaluated at the measurement point from the simulated wind field. This approach provides a detailed spatial description of the wind field and can be applied to averaged data for steady analysis. For the comparison with LES results, time average and spatial interpolation of the computed wind field are needed. Moreover, a proper wind direction should be chosen to evaluate the radial wind speed.With two lidars performing consecutive PPI scans over the same region from different places it is possible to estimate the horizontal wind field where the scanned regions overlap. Due to the limits in the synchronization of the PPI scans by the lidars, only steady analysis based on time averaged data can be done. A horizontal grid based on the one used for the LES is overlapped to the region covered by the two non-co-planar scans. The horizontal wind field at a considered point can be evaluated solving the system given by at least two non-aligned radial directions about this point. For each node, the data sampled by the lidars in a well defined volume during the considered time interval is used to write this system. Moreover, a discrete approximation of the continuity equation is applied to link the solutions for all the grid nodes

  15. Les masques trompeurs de la bipolarité: étude de 100 cas

    PubMed Central

    Nabih, Fadoua Oueriagli; Benali, Abdesslam; Adali, Imane; Manoudi, Fatiha; Asri, Fatima

    2015-01-01

    Le trouble bipolaire (TB) est une pathologie dont la prévalence est estimée à 1-2%. Le diagnostic précoce du trouble constitue un enjeu thérapeutique majeur. L'objectif de ce travail est de déterminer les différents diagnostiques attribués aux patients bipolaires avant de recevoir le diagnostic adéquat et de préciser le délai moyen du retard diagnostique. C'est une étude descriptive transversale portant sur 100 patients atteints de TB, inclus selon les critères du DSM V, qui ont été vus en consultation ou bien hospitalisés dans le service de psychiatrie de l'hôpital Militaire Avicenne de Marrakech, durant une période de deux ans. L’âge moyen des patients était de 29,5 ans avec une prédominance masculine (80%). 40% de nos patients ont reçu au début un autre diagnostic que celui du TB et le premier diagnostic retenu était celui de l’épisode dépressif majeur dans 36% des cas, suivi de l'accès psychotique aigu dans 28% des cas, la schizophrénie dans 16,8% et le trouble de personnalité dans 10,2%. Le délai moyen du retard diagnostic était de 64 mois. 50% des patients ayant reçu un autre diagnostic avaient consulté au moins un psychiatre et 60% des patients avaient été hospitalisés au moins une fois avant le diagnostic du TB. Les errances diagnostiques du TB sont bien établies, conduisant forcément à un retard de prise en charge adéquate. Ces données devraient alerter les psychiatres pour favoriser un meilleur dépistage de la manie et de l'hypomanie qui restent les éléments clé du diagnostic du TB. PMID:26587161

  16. A dynamic hybrid RANS/LES modeling methodology for turbulent/transitional flow field prediction

    NASA Astrophysics Data System (ADS)

    Alam, Mohammad Faridul

    A dynamic hybrid Reynolds-averaged Navier-Stokes (RANS)-Large Eddy Simulation (LES) modeling framework has been investigated and further developed to improve the Computational Fluid Dynamics (CFD) prediction of turbulent flow features along with laminar-to-turbulent transitional phenomena. In recent years, the use of hybrid RANS/LES (HRL) models has become more common in CFD simulations, since HRL models offer more accuracy than RANS in regions of flow separation at a reduced cost relative to LES in attached boundary layers. The first part of this research includes evaluation and validation of a dynamic HRL (DHRL) model that aims to address issues regarding the RANS-to-LES zonal transition and explicit grid dependence, both of which are inherent to most current HRL models. Simulations of two test cases---flow over a backward facing step and flow over a wing with leading-edge ice accretion---were performed to assess the potential of the DHRL model for predicting turbulent features involved in mainly unsteady separated flow. The DHRL simulation results are compared with experimental data, along with the computational results for other HRL and RANS models. In summary, these comparisons demonstrate that the DHRL framework does address many of the weaknesses inherent in most current HRL models. Although HRL models are widely used in turbulent flow simulations, they have limitations for transitional flow predictions. Most HRL models include a fully turbulent RANS component for attached boundary layer regions. The small number of HRL models that do include transition-sensitive RANS models have issues related to the RANS model itself and to the zonal transition between RANS and LES. In order to address those issues, a new transition-sensitive HRL modeling methodology has been developed that includes the DHRL methodology and a physics-based transition-sensitive RANS model. The feasibility of the transition-sensitive dynamic HRL (TDHRL) model has been investigated by

  17. Modeling Production Plant Forming Processes

    SciTech Connect

    Rhee, M; Becker, R; Couch, R; Li, M

    2004-09-22

    Engineering has simulation tools and experience in modeling forming processes. Y-12 personnel have expressed interest in validating our tools and experience against their manufacturing process activities such as rolling, casting, and forging etc. We have demonstrated numerical capabilities in a collaborative DOE/OIT project with ALCOA that is nearing successful completion. The goal was to use ALE3D to model Alcoa's slab rolling process in order to demonstrate a computational tool that would allow Alcoa to define a rolling schedule that would minimize the probability of ingot fracture, thus reducing waste and energy consumption. It is intended to lead to long-term collaboration with Y-12 and perhaps involvement with other components of the weapons production complex. Using simulations to aid in design of forming processes can: decrease time to production; reduce forming trials and associated expenses; and guide development of products with greater uniformity and less scrap.

  18. Glasses formed by hypervelocity impact

    NASA Technical Reports Server (NTRS)

    Stoeffler, D.

    1984-01-01

    This paper presents description, classification, and geological setting of impact glasses, which are formed as a result of meteorite impacts with the planetary surface, and discusses the impact-glass formation process in the context of cratering mechanics. Impact glasses can be classified as belonging to two major groups: (1) mineral glasses, which are identical in composition to a mineral, and (2) rock glasses, which have the composition of a rock or a mixture of various rocks. Rock glasses may be (1) melt ejecta, (2) parts of a coherent melt layer inside the crater cavity, or (3) dikes or veins. The composition of rock glasses at a particular crater can be matched by that of the target. In nonporous rocks, the formation of rock glasses requires peak pressures in excess of 60-80 GPa, while mineral glasses are formed in the pressure range of about 25 to 55 GPa; in porous rocks, interstitial glass forms at pressures as low as 5 GPa.

  19. Methods of forming boron nitride

    SciTech Connect

    Trowbridge, Tammy L; Wertsching, Alan K; Pinhero, Patrick J; Crandall, David L

    2015-03-03

    A method of forming a boron nitride. The method comprises contacting a metal article with a monomeric boron-nitrogen compound and converting the monomeric boron-nitrogen compound to a boron nitride. The boron nitride is formed on the same or a different metal article. The monomeric boron-nitrogen compound is borazine, cycloborazane, trimethylcycloborazane, polyborazylene, B-vinylborazine, poly(B-vinylborazine), or combinations thereof. The monomeric boron-nitrogen compound is polymerized to form the boron nitride by exposure to a temperature greater than approximately 100.degree. C. The boron nitride is amorphous boron nitride, hexagonal boron nitride, rhombohedral boron nitride, turbostratic boron nitride, wurzite boron nitride, combinations thereof, or boron nitride and carbon. A method of conditioning a ballistic weapon and a metal article coated with the monomeric boron-nitrogen compound are also disclosed.

  20. Substrate system for spray forming

    DOEpatents

    Chu, Men G.; Chernicoff, William P.

    2002-01-01

    A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

  1. Substrate system for spray forming

    DOEpatents

    Chu, Men G.; Chernicoff, William P.

    2000-01-01

    A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

  2. Method of forming structural heliostat

    DOEpatents

    Anderson, Alfred J.

    1984-06-26

    In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

  3. PROCESS OF FORMING POWDERED MATERIAL

    DOEpatents

    Glatter, J.; Schaner, B.E.

    1961-07-14

    A process of forming high-density compacts of a powdered ceramic material is described by agglomerating the powdered ceramic material with a heat- decompossble binder, adding a heat-decompossble lubricant to the agglomerated material, placing a quantity of the material into a die cavity, pressing the material to form a compact, pretreating the compacts in a nonoxidizing atmosphere to remove the binder and lubricant, and sintering the compacts. When this process is used for making nuclear reactor fuel elements, the ceramic material is an oxide powder of a fissionsble material and after forming, the compacts are placed in a cladding tube which is closed at its ends by vapor tight end caps, so that the sintered compacts are held in close contact with each other and with the interior wall of the cladding tube.

  4. Les traumatismes fermés du rein: à propos de 55 observations

    PubMed Central

    Ksiri, Khalid; Goultein, Issam; Aboutaeib, Rachid; Dakir, Mohamed; Rabii, Redouaune; Debbagh, Adil; Bennani, Saad; Meziane, Fathi

    2014-01-01

    Le rein est l'organe le plus fréquemment atteint lors des traumatismes urologiques. Actuellement la prise en charge des traumatismes rénaux est de plus en plus conservatrice. Nous avons réalisé une étude rétrospective portant sur 55 cas de traumatisme fermé du rein, colligés au service d'urologie au CHU Ibn Rochd de Casablanca sur une période de 6 ans étalée entre 2006 et 2012. Le but de ce travail est d'analyser notre prise en charge thérapeutique et les résultats obtenus en les comparants à différentes séries de la littérature. Le but final étant d'améliorer la prise en charge des traumatismes fermés du rein au sein de notre établissement sanitaire. L’âge moyen était de 26 ans. Le sexe ratio (H/F) était de 10. Les étiologies étaient dominées par les accidents de la voie publique (27 cas), et les chutes (11cas). Cinq patients se sont présentés en état de choc et opérés en urgence. Tous nos patients ont eu une tomodensitométrie rénale permettant de classer les traumatismes selon l'AAST (American Association for the Surgery of Trauma): 25% de lésions grade I, 9% de lésions grade II, 38,6% de lésions grade III, 22,7% de lésions grade IV, et 4,5% de lésions grade V. Le traitement conservateur était efficace chez 40 cas, dont 6 ont bénéficié d'une montée de sonde JJ. Le traitement chirurgical était nécessaire chez 15 cas, 5 en urgence immédiate et 10 en urgences différées après une attitude conservatrice initiale. Après un recul moyen de 11 mois les patients traités de façon conservatrice ont évolué favorablement. Devant l’évolution favorable de nos patients ayant eu une simple surveillance et tenant compte des résultats de la littérature, nous pensons qu'en l'absence de lésions intra-abdominales associées ou d'instabilité hémodynamique, la simple surveillance reste la méthode thérapeutique de choix. PMID:25374632

  5. Les tumeurs malignes anorectales en milieu hospitalier à Ouagadougou: aspects épidémiologiques et diagnostiques

    PubMed Central

    Guingané, Alice Nanelin; Sombié, Roger Arsène; Bougouma, Alain

    2014-01-01

    Le but de notre étude était de décrire les caractéristiques épidémiologiques et diagnostiques des tumeurs malignes anorectales en milieu hospitalier à Ouagadougou. Il s'est agi d'une étude rétrospective et transversale qui a concerné les patients vus en endoscopie digestive basse au cours de la période allant du 29/09/1999 au 04/10/2008. À l'aide d'une fiche de collecte, nous avons recueilli, dans 4 structures sanitaires et 3 laboratoires d'anatomie et de cytologie pathologiques de la ville de Ouagadougou, les données à partir des comptes-rendus d'endoscopie digestive basse et des registres d'anatomie et de cytologie pathologiques. Durant la période de notre étude, 645 patients ont été examinés en anorectoscopie et 882 cas d'affections anorectales colligés. Les tumeurs malignes anorectales avec 61 cas (6,9%) occupaient la quatrième place après la maladie hémorroïdaire (45,6%), les anites (21,1%) et les fissures (13,9%). Elles regroupaient les cancers du rectum (4,2%) et les cancers de l'anus (2,7%). Vingt cancers anorectaux ont été histologiquement confirmés parmi lesquels l'adénocarcinome était le type histologique le plus retrouvé avec 17 cas. Les tumeurs malignes, quatrième affection anorectale la plus fréquente au cours de notre étude, constituent une préoccupation du fait de leur fréquence croissante, leur diagnostic souvent tardif et les difficultés liées à leur prise en charge surtout dans nos pays avec une population à faible revenu. La sensibilisation de la population et la prescription plus large de l'endoscopie digestive basse devraient permettre une meilleure prise en charge des patients. PMID:25368715

  6. Les accidents de scooter chez l'enfant au CHU Aristide Le Dantec de Dakar: à propos de 74 cas

    PubMed Central

    Mohamed, Azhar Salim; Ngom, Gabriel; Sow, Mamadou; Mbaye, Papa Alassane; Camara, Souleymane; Seck, Ndeye Fatou; Ndour, Oumar

    2016-01-01

    Introduction Les accidents de scooter sont de plus en plus fréquents à Dakar. Le but de ce travail est de rapporter les aspects épidémiologiques et lésionnels des ces accidents chez l'enfant à Dakar. Méthodes Une étude rétrospective et descriptive a été menée dans le Service de Chirurgie Pédiatrique du CHU Aristide Le Dantec de Dakar entre le 1er janvier 2009 et le 31 décembre 2011. Nous avons étudié divers paramètres dont la fréquence, les aspects sociodémographiques et lésionnels. Résultats Les accidents de scooter représentaient 12% des accidents de la voie publique. Ils étaient fréquents entre 12 heures et 14 heures (27%) et entre 18 heures et 20 heures (28,4%). Ils pouvaient survenir tous les jours et étaient fréquents pendant les mois d'avril (17,6%) et de juin (13,5%). Ils survenaient essentiellement dans la périphérie de Dakar (78%). La tranche de 3 à 8 ans (60,8%) était la plus touchée. Le sexe masculin était prédominant (sexe ratio de 1,5). Les piétons étaient les plus vulnérables (93,2%). La chute était le mécanisme dominant (98,7%). Les lésions touchaient surtout le membre inférieur (51,1%) et étaient constituées essentiellement de fracture. Conclusion La fréquence des accidents de scooter chez l'enfant est liée à l'urbanisation galopante et à l'accroissement du parc automobile dans une presqu’île. Les victimes sont essentiellement des piétons et présentent le plus souvent des fractures. PMID:27200137

  7. Propriétés électroniques et schémas de bandes dans les semi-conducteurs amorphes. II. Etude des phénomènes de transport

    NASA Astrophysics Data System (ADS)

    Moliton, André; Ratier, Bernard

    We present the particular study of three important electric parameters which characterize an amorphous semiconductor. The band scheme is the Mott - Davis model and the three parameters : dark conductivity, thermoelectric power and alternative conductivity are determined versus temperature : calculations are presented on the more general manner for the successive energy levels (extended states, localized states in band tails, localized states near Fermi level). The schematic representations are finally proposed : at the classical curves obtained for the conductivities, we add a peculiar scheme for the thermoelectric power : its study is of importance for determining (with its sign) the type of amorphous semiconductor. Nous présentons de façon détaillée l'étude théorique de trois importants paramètres électriques susceptibles de caractériser un semi-conducteur amorphe. Le schéma de bande retenu est celui de Mott - Davis et les trois paramètres : conductivité continue, pouvoir thermoélectrique et conductivité alternative sont déterminés en particulier en fonction de la température : nous nous sommes attachés à présenter les calculs sous leur forme la plus générale possible en faisant intervenir successivement les différents mécanismes relatifs aux différents niveaux d'énergie (énergie relative aux états délocalisés, localisés dans les queues de bande, localisés au voisinage du niveau de Fermi). Les représentations schématiques, classiques pour la conductivité continue et à un degré moindre pour la conductivité alternative, sont proposées : nous détaillons en particulier celle du pouvoir thermoélectrique S dont l'étude est en fait essentielle car le signe de S (cf. Mott) est une des seules caractérisations fiables du type de semi-conducteur amorphe étudié.

  8. FORM version 4.0

    NASA Astrophysics Data System (ADS)

    Kuipers, J.; Ueda, T.; Vermaseren, J. A. M.; Vollinga, J.

    2013-05-01

    We present version 4.0 of the symbolic manipulation system FORM. The most important new features are manipulation of rational polynomials and the factorization of expressions. Many other new functions and commands are also added; some of them are very general, while others are designed for building specific high level packages, such as one for Gröbner bases. New is also the checkpoint facility, that allows for periodic backups during long calculations. Finally, FORM 4.0 has become available as open source under the GNU General Public License version 3. Program summaryProgram title: FORM. Catalogue identifier: AEOT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 151599 No. of bytes in distributed program, including test data, etc.: 1 078 748 Distribution format: tar.gz Programming language: The FORM language. FORM itself is programmed in a mixture of C and C++. Computer: All. Operating system: UNIX, LINUX, Mac OS, Windows. Classification: 5. Nature of problem: FORM defines a symbolic manipulation language in which the emphasis lies on fast processing of very large formulas. It has been used successfully for many calculations in Quantum Field Theory and mathematics. In speed and size of formulas that can be handled it outperforms other systems typically by an order of magnitude. Special in this version: The version 4.0 contains many new features. Most important are factorization and rational arithmetic. The program has also become open source under the GPL. The code in CPC is for reference. You are encouraged to upload the most recent sources from www.nikhef.nl/form/formcvs.php because of frequent bug fixes. Solution method: See "Nature of Problem", above. Additional comments: NOTE: The code in CPC is for reference. You are encouraged

  9. Auxin biosynthesis and storage forms

    PubMed Central

    Strader, Lucia C.

    2013-01-01

    The plant hormone auxin drives plant growth and morphogenesis. The levels and distribution of the active auxin indole-3-acetic acid (IAA) are tightly controlled through synthesis, inactivation, and transport. Many auxin precursors and modified auxin forms, used to regulate auxin homeostasis, have been identified; however, very little is known about the integration of multiple auxin biosynthesis and inactivation pathways. This review discusses the many ways auxin levels are regulated through biosynthesis, storage forms, and inactivation, and the potential roles modified auxins play in regulating the bioactive pool of auxin to affect plant growth and development. PMID:23580748

  10. 48 CFR Appendix - List of IAAR Forms

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false List of IAAR Forms Federal Acquisition Regulations System BROADCASTING BOARD OF GOVERNORS CLAUSES AND FORMS FORMS Illustrations of Forms The Broadcasting Board of Governors forms. List of IAAR Forms 1953.370-21The Broadcasting Board of Governors Form IA-21, Abstract...

  11. 48 CFR Appendix - List of IAAR Forms

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false List of IAAR Forms Federal Acquisition Regulations System BROADCASTING BOARD OF GOVERNORS CLAUSES AND FORMS FORMS Illustrations of Forms The Broadcasting Board of Governors forms. List of IAAR Forms 1953.370-21The Broadcasting Board of Governors Form IA-21, Abstract...

  12. 48 CFR 53.301 - Standard forms.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false Standard forms. 53.301... AND FORMS FORMS Illustrations of Forms 53.301 Standard forms. This section illustrates the standard... order. The subsection numbers correspond with the standard form numbers (e.g., Standard Form 18...

  13. 48 CFR 53.301 - Standard forms.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 2 2012-10-01 2012-10-01 false Standard forms. 53.301... AND FORMS FORMS Illustrations of Forms 53.301 Standard forms. This section illustrates the standard... order. The subsection numbers correspond with the standard form numbers (e.g., Standard Form 18...

  14. 48 CFR 53.301 - Standard forms.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Standard forms. 53.301... AND FORMS FORMS Illustrations of Forms 53.301 Standard forms. This section illustrates the standard... order. The subsection numbers correspond with the standard form numbers (e.g., Standard Form 18...

  15. 48 CFR Appendix - List of IAAR Forms

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true List of IAAR Forms Federal Acquisition Regulations System BROADCASTING BOARD OF GOVERNORS CLAUSES AND FORMS FORMS Illustrations of Forms The Broadcasting Board of Governors forms. List of IAAR Forms 1953.370-21The Broadcasting Board of Governors Form IA-21, Abstract...

  16. 48 CFR Appendix - List of IAAR Forms

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false List of IAAR Forms Federal Acquisition Regulations System BROADCASTING BOARD OF GOVERNORS CLAUSES AND FORMS FORMS Illustrations of Forms The Broadcasting Board of Governors forms. List of IAAR Forms 1953.370-21The Broadcasting Board of Governors Form IA-21, Abstract...

  17. La prise en charge des troubles de santé mentale par les omnipraticiens du Québec

    PubMed Central

    Fleury, Marie-Josée; Farand, Lambert; Aubé, Denise; Imboua, Armelle

    2012-01-01

    Résumé Objectif Cette recherche vise à documenter la prise en charge des troubles mentaux (TM) par les omnipraticiens. Type d’étude Il s’agit d’une étude mixte intégrant un questionnaire auto-administré et des entrevues qualitatives. La banque de données administratives des actes médicaux de la Régie de l’assurance maladie du Québec a aussi été analysée. Contexte La province de Québec. Participants Un total de 1415 omnipraticiens de différents lieux de pratiques ont été sollicités pour le questionnaire; 970 ont été rejoints. Un sous-groupe de 60 omnipraticiens a été rejoint pour les entrevues. Principaux paramètres à l'étude La prévalence annuelle des consultations reliées à des TM courants (TMC) ou graves (TMG), les pratiques cliniques, les pratiques de collaboration, les facteurs facilitant ou entravant la prise en charge des TM, ainsi que les recommandations pour l’amélioration du système de soins. Résultats Le taux de réponse a été de 41% (n = 398 omnipraticiens) pour le questionnaire et de 63% (n = 60) pour les entrevues. Environ 25 % des visites chez les omnipraticiens sont associées à des TM. Presque tous les omnipraticiens prennent en charge des TMC et se sentent compétents pour le faire, à l’inverse de la situation retrouvée pour les TMG. Près de 20 % des TMC sont référés (principalement à des intervenants psychosociaux), alors que près de 75 % des TMG sont référés (surtout en psychiatrie et à l’urgence). Plus de 50 % des omnipraticiens affirment n’entretenir aucun contact avec l’une ou l’autre des ressources de santé mentale. Plusieurs facteurs influencent la prise en charge des TM: les profils des patients (complexité des TM, troubles concomitants); les caractéristiques des omnipraticiens (réseau informel, formation); la culture professionnelle (travail en silo, mécanismes cliniques formalisés); le milieu institutionnel (multidisciplinarité, salariat); l’organisation des

  18. Emerging Forms of School Organization.

    ERIC Educational Resources Information Center

    Rufo-Lignos, Patricia; Richards, Craig E.

    2003-01-01

    Examines new forms of school organization that do not fit traditional definitions of public and private schools. Three case studies explore critical features of the public-private distinction, highlighting the fuzzy boundaries between schools that are clearly public and schools that are clearly private, and contending that their shared…

  19. Process for forming sulfuric acid

    DOEpatents

    Lu, Wen-Tong P.

    1981-01-01

    An improved electrode is disclosed for the anode in a sulfur cycle hydrogen generation process where sulfur dioxie is oxidized to form sulfuric acid at the anode. The active compound in the electrode is palladium, palladium oxide, an alloy of palladium, or a mixture thereof. The active compound may be deposited on a porous, stable, conductive substrate.

  20. Synthesis Can Take Many Forms

    ERIC Educational Resources Information Center

    Darrow, Rob

    2005-01-01

    Synthesis can take many forms at the high school level and from a Big6 perspective. Synthesis means purposeful, valuable and interesting assignments. It is very important for a classroom teacher to recognize that students can synthesize information several times during a project and that there are many different ways to present information.

  1. Collaborating with Forms in Nature

    ERIC Educational Resources Information Center

    Castro, Aileen Pugliese

    2011-01-01

    Taking students outside is a great opportunity to make art. In this article, the author describes how her students collaborated with forms in nature to create their own visual structures to communicate ideas. This lesson can be done on the beach, in a sand box on the school playground, in grassy areas, or nature can even be brought into the…

  2. TEAM TEACHING HAS MANY FORMS.

    ERIC Educational Resources Information Center

    DIESMAN, FLORENCE M.

    COMMENTS ARE MADE ON VARIOUS FORMS OF TEAM TEACHING. AT FERRIS HIGH SCHOOL, SPOKANE, A TEAM OF FOUR INSTRUCTORS TAUGHT ENGLISH TO 526 SOPHOMORES, IN LECTURE GROUPS OF ABOUT 250 EACH. THE DAY WAS DIVIDED INTO 26 15-MINUTE MODULES. CLASS LECTURES, SEMINARS, STUDY PERIODS, LABORATORIES WERE ALL COMPOSED OF VARIOUS COMBINATIONS OF THESE MODULES.…

  3. Intersections: Form, Feeling, and Isomorphism

    ERIC Educational Resources Information Center

    Reichling, Mary J.

    2004-01-01

    In this article, the author examines the intersections of three concepts, form, feeling, and isomorphism, in the work of Susanne Langer, as they are fundamental to an understanding of her aesthetic theory and to the construction of a philosophy of music and music education. These three concepts hold meanings that differ among musicians and…

  4. Technetium Immobilization Forms Literature Survey

    SciTech Connect

    Westsik, Joseph H.; Cantrell, Kirk J.; Serne, R. Jeffrey; Qafoku, Nikolla

    2014-05-01

    Of the many radionuclides and contaminants in the tank wastes stored at the Hanford site, technetium-99 (99Tc) is one of the most challenging to effectively immobilize in a waste form for ultimate disposal. Within the Hanford Tank Waste Treatment and Immobilization Plant (WTP), the Tc will partition between both the high-level waste (HLW) and low-activity waste (LAW) fractions of the tank waste. The HLW fraction will be converted to a glass waste form in the HLW vitrification facility and the LAW fraction will be converted to another glass waste form in the LAW vitrification facility. In both vitrification facilities, the Tc is incorporated into the glass waste form but a significant fraction of the Tc volatilizes at the high glass-melting temperatures and is captured in the off-gas treatment systems at both facilities. The aqueous off-gas condensate solution containing the volatilized Tc is recycled and is added to the LAW glass melter feed. This recycle process is effective in increasing the loading of Tc in the LAW glass but it also disproportionally increases the sulfur and halides in the LAW melter feed which increases both the amount of LAW glass and either the duration of the LAW vitrification mission or the required supplemental LAW treatment capacity.

  5. Triggered pore-forming agents

    DOEpatents

    Bayley, H.; Walker, B.J.; Chang, C.Y.; Niblack, B.; Panchal, R.

    1998-07-07

    An inactive pore-forming agent is revealed which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell. 30 figs.

  6. Spin-forming Project Report

    SciTech Connect

    Switzner, Nathan; Henry, Dick

    2009-03-20

    In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

  7. Researching New Forms of Literacy.

    ERIC Educational Resources Information Center

    Mackey, Margaret

    2003-01-01

    Proposes that reading researchers and teachers must acknowledge that contemporary new readers have no other way of learning about reading except within the context of a background of vast textual experience across many media and through multiple forms of address. Suggests educators need to take a broad view of the complex context in which texts…

  8. Assessing "Combining Forms" in Science.

    ERIC Educational Resources Information Center

    Floriani, Bernard P.; Cairns, Jack C.

    1982-01-01

    Since there appears to be a direct relationship between reading comprehension and vocabulary, an inventory is offered which assesses students' knowledge of the meaning of "combining forms" (automobile, aero-dynamics, etc.) and not words themselves. The inventory can serve as a model to develop additional inventories for Latin/Greek roots.…

  9. Cheaper Hydride-Forming Cathodes

    NASA Technical Reports Server (NTRS)

    Jones, Jack A.; Blue, Gary

    1990-01-01

    Hydride-forming cathodes for electrochemical experiments made of materials or combinations of materials cheaper and more abundant than pure palladium, according to proposal. Concept prompted by needs of experimenters in now-discredited concept of electrochemical nuclear fusion, cathodes useful in other electrochemical applications involving generation or storage of hydrogen, deuterium, or tritium.

  10. [[The apothecaries of the district of Les Halles in Paris in the 17th century. Molière's ancestors in Les Halles].

    PubMed

    Warolin, Christian

    2016-03-01

    Les Halles were created by King Louis VI at the begining of the 12th century as a central market for food and trade. Apothecaries conducted their trade there from that time. In the 17th century, eleven apothecaries were established in this district, bordered on the south by the rue Saint-Honoré, on the east by the rue Saint-Denis, on the west by the rue de la Tonnellerie, and the north by the rue Montmartre. Their biographies have been analysed, and the data that has been collected has enabled their précise location to be fixed on a map of 1700. Molière's ancestors, both maternal (the Cressé family) and paternal (the Pocquelin's), lived in this district. Details of their relationships with their apothecary neighbours have been revealed. PMID:27281935

  11. Dépression et niveau de fardeau chez les aidants familiaux des sujets déments en Tunisie

    PubMed Central

    Ben Thabet, Jihène; Jaoua, Feriel; Charfi, Nada; Zouari, Lobna; Zouari, Nasreddine; Maalej, Mohamed

    2011-01-01

    Introduction La démence peut retentir lourdement sur les aidants familiaux du patient. Les objectifs de notre étude étaient de déterminer le niveau de fardeau et de la dépression chez les aidants familiaux de sujets déments, et d'identifier les facteurs associés à un niveau de fardeau élevé. Méthodes Il s'agissait d'une enquête auprès de 65 aidants tunisiens. Les niveaux de fardeau et de la dépression ont été évalués par, respectivement, l'inventaire de Zarit et l’échelle de Beck. Résultats Le taux des aidants qui avaient un niveau de fardeau élevé était de 52,3 %. Une dépression modérée ou sévère a été relevée chez 46,2 %. Un niveau de fardeau élevé était corrélé, du côté de l'aidant, avec le niveau socio-économique moyen à élevé, la cohabitation avec le patient, le fait d’être son conjoint, la réduction des activités quotidiennes et la sévérité de la dépression, et, du côté du dément, avec l'agressivité. Conclusion Les facteurs corrélés à un niveau de fardeau élevé orientent vers les cibles d'intervention et sont susceptibles d’être améliorés par la prise en charge, ce qui contribuerait à alléger la détresse des aidants. PMID:22384291

  12. Effets Seebeck et Nernst dans les cuprates: Etude de la reconstruction de la surface de Fermi sous champ magnetique intense

    NASA Astrophysics Data System (ADS)

    Laliberte, Francis

    2010-06-01

    Ce memoire presente des mesures de transport thermoelectrique, les effets Seebeck et Nernst, dans une serie d'echantillons de supraconducteurs a haute temperature critique. Des resultats obtenus recemment au Laboratoire National des Champs Magnetiques Intenses a Grenoble sur La1.7Eu0.2Sr0.1 CuO4, La1.675Eu0.2Sr0.125CuO 4, La1.64Eu0.2Sr0.16CuO4, La1.74Eu0.1Sr0.16CuO4 et La 1.4Nd0.4Sr0.2CuO4 sont analyses. Une attention particuliere est accordee aux equations de la theorie semi-classique du transport et leur validite est verifiee. La procedure experimentale et les materiaux utilises pour concevoir les montages de mesures sont expliques en detail. Enfin, un chapitre est dedie a l'explication et l'interpretation des resultats de transport thermoelectrique sur YBa2Cu3O6+delta publies au cours de l'hiver 2010 dans les revues Nature et Physical Review Letters. Les donnees d'effet Seebeck dans les echantillons de La 1.8-x,Eu0.2SrxCuO 4, ou un changement de signe est observe, permettent de conclure a la presence d'une poche d'electrons dans la surface de Fermi qui domine le transport a basse temperature dans la region sous-dopee du diagramme de phase. Cette conclusion est similaire a celle obtenue par des mesures d'effet Hall dans YBa 2Cu3O6+delta et elle cadre bien dans un scenario de reconstruction de la surface de Fermi. Les donnees d'effet Nernst recueillies indiquent que la contribution des fluctuations supraconductrices est limitee a un modeste intervalle de temperature au-dessus de la temperature critique.

  13. Quelle place pour l’anesthésie locorégionale chez les brûlés?

    PubMed Central

    Chaibdraa, A.; Medjelekh, M.S.; Saouli, A.; Bentakouk, M.C.

    2015-01-01

    Summary La pratique de l’anesthésie locorégionale chez les brûlés est limitée par de nombreux facteurs. Elle est considérée comme marginale dans l’approche multimodale du traitement de la douleur par excès de nociception. Ce travail rétrospectif, sur une période de 3 années, porte sur les anesthésies locorégionales (ALR) réalisées. Les résultats obtenus vont permettre, en regard de la rareté des données de la littérature, de formuler quelques suggestions sur la place de cette technique. Il a été recensé 634 ALR, dont 96% chez des adultes. Les membres inférieurs sont les plus concernés (76%). Des anesthésies rachidiennes ont été pratiquées chez 32 patients dont 4 enfants. Les incidents sont peu fréquents (3%) et sans gravité. L’ALR peut représenter une option utile dans la stratégie multimodale de prise en charge de la douleur, la réhabilitation passive précoce et la chirurgie de recouvrement par la greffe de peau. Elle mérite d’être explorée en ambulatoire, dans la mesure où 95% des brûlés ne sont pas hospitalisés. La place de l’anesthésie-locorégionale chez les brûlés devrait susciter plus d’intérêts, pour permettre d’établir des protocoles fondés sur une réflexion pluridisciplinaire. PMID:27279806

  14. Les biofilms bactériens : leur importance en santé animale et en santé publique

    PubMed Central

    Tremblay, Yannick D.N.; Hathroubi, Skander; Jacques, Mario

    2014-01-01

    Résumé Les biofilms bactériens sont des amas structurés de cellules bactériennes enrobés d’une matrice polymérique et attachés à une surface. Le biofilm protège les bactéries et leur permet de survivre dans des conditions environnementales hostiles. Les bactéries du biofilm peuvent résister à la réponse immunitaire de l’hôte et sont beaucoup plus résistantes aux antibiotiques et aux désinfectants que les cellules bactériennes planctoniques. La capacité de former un biofilm est maintenant reconnue comme une caractéristique propre à plusieurs microorganismes. La présence de biofilms lors d’infections demande donc de nouvelles méthodes de prévention, de diagnostic et de traitement. De même, la présence de biofilms sur des surfaces retrouvées à la ferme, à l’abattoir ou à l’usine de transformation affectera l’efficacité du protocole de désinfection. De façon surprenante, la formation de biofilms chez les bactéries pathogènes des animaux et les bactéries zoonotiques est un sujet relativement peu étudié. Ce bref compte rendu a pour objectif de sensibiliser les intervenants en santé animale à l’importance des biofilms. PMID:24688172

  15. Electro-Hydraulic Forming of Sheet Metals: Free-forming vs. Conical-die Forming

    SciTech Connect

    Rohatgi, Aashish; Stephens, Elizabeth V.; Davies, Richard W.; Smith, Mark T.; Soulami, Ayoub; Ahzi, Said

    2012-05-01

    This work builds upon our recent advances in quantifying high-rate deformation behavior of sheet metals, during electro-hydraulic forming (EHF), using high-speed imaging and digital image correlation techniques. Following recent publication of an earlier manuscript, resulting from this project, in the Journal of Materials Processing Technology, this manuscript further details our results and compares forming behavior when the process is carried out inside an open-die or a conical die. It is anticipated that quantitative information of the sheet deformation history, made possible by the experimental technique developed in this work, will improve our understanding on the roles of strain-rate and sheet-die interactions in enhancing the sheet metal formability during high-rate forming. This knowledge will be beneficial to the automotive industry and enable them to fabricate light-weight sheet parts out of Al and advanced high strength steels.

  16. Prévalence des cervicalgies et douleurs des membres supérieures chez les utilisateurs d'ordinateur en milieu professionnel à Casablanca (Maroc)

    PubMed Central

    Seknaji, Nawal; Rachidi, Wafaa; Hassoune, Samira; Janani, Saadia; Nani, Samira; Maaroufi, Abderrahmane; Mkinsi, Ouafaa

    2013-01-01

    Introduction Les cervicalgies et douleurs du membre supérieur (CDMS) affectent des millions d'utilisateurs d'ordinateurs dans les pays développés. L'objectif de ce travail était de déterminer la prévalence des cervicalgies et douleurs du membre supérieur (CDMS) à Casablanca et identifier les différents facteurs de risque qui y sont impliqués, afin de définir les sous-groupes à haut risque, et d’établir des plans d'intervention efficaces. Méthodes Il s'agit d'une étude transversale, menée chez 118 employés de bureau francophones et utilisant l'ordinateur, à Casablanca. Les données ont été collectées de Décembre 2011 à Juin 2012, en utilisant la version française d'un questionnaire validé: Maastricht-Upper-extremity-Questionnaire. Résultats 118 utilisateurs d'ordinateur en milieu professionnel ont été recrutés. Parmi les employés enquêtés, 93% ont rapporté des CDMS localisées au moins à un site. Les plaintes les plus fréquemment rapportées étaient les douleurs des épaules et les cervicalgies (48,3% et 46,6% respectivement). Nous n'avons pas remarqué de différence significative des fréquences des douleurs selon le genre. Nos résultats concordent avec les données de la littérature où il existe un certain consensus quant à l'impact des mauvaises conditions ergonomiques sur les troubles musculo-squelettiques du membre supérieur en milieu professionnel. De même, les études récentes examinant les effets combinés et/ou interactifs tant des facteurs biomécaniques/physiques que de facteurs psychosociaux professionnels vont de pair avec nos résultats. Conclusion Il en ressort que les stratégies d'intervention visant à réduire les CDMS doivent agir essentiellement sur 3 volets, le premier correspond à l'amélioration et la sensibilisation quant au respect des conditions ergonomiques, le second concerne l'amélioration des conditions psychosociales. Enfin le troisième volet vise la rationalisant de la demande de

  17. Le Staphylococcus aureus méthicillinorésistant d’origine non nosocomiale dans les communautés autochtones du Canada

    PubMed Central

    Irvine, James

    2012-01-01

    RÉSUMÉ Les infections à Staphylococcus aureus méthicillinorésistant d’origine non nosocomiale (SARM-ONN) sont devenues un grave problème dans certaines communautés autochtones du Canada (y compris les Premières nations, les Inuits et les Métis). Surtout associé à des infections de la peau et des tissus mous, cet organisme peut également entraîner une morbidité et une mortalité importantes. Il existe des lignes directrices canadiennes et américaines publiées sur la prise en charge des infections à SARM-ONN. Il faut examiner les modes précis d’épidémiologie, de microbiologie et de susceptibilité et la situation sociale et environnementale des infections à SARM-ONN dans les communautés autochtones pour parvenir à des stratégies qui en réduiront la transmission. La réduction des maisons surpeuplées et l’amélioration de l’approvisionnement en eau potable au domicile sont des stratégies optimales pour réduire les conséquences de ces infections, mais il est recommandé de mettre en œuvre les lignes directrices canadiennes et d’accroître les stratégies de prévention à titre de mesures provisoires.

  18. 76 FR 61725 - Agency Information Collection Activities: Case Submission Form, Case Assistance Form; (Form DHS...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-05

    ... Federal Register on July 18, 2011 at 76 FR 42129, for a 60-day public comment period. No comments were... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HOMELAND...-7001), Online Ombudsman Form DHS-7001 AGENCY: Office of the Citizenship and Immigration...

  19. Terra firma-forme dermatosis.

    PubMed

    Oztürk, Ferdi; Kocabaş, Engin; Ertan, Pelin; Ermertcan, Aylin Türel

    2010-12-01

    Terra firma-forme dermatosis (TFFD) is an uncommon disorder of keratinization with an unknown etiology in which patients present with dirt-like lesions that are resistant to washing. A 6-year old girl presented with the complaint of an asymptomatic brownish black dirt-like eruption on her body. Her parents reported no response to washing with soap and water. Dermatologic examination revealed brown hyperpigmented patches on the trunk and abdominal region. TFFD was suspected, and isopropyl alcohol was applied to the patient's lesions. All lesions completely disappeared after rubbing with alcohol. Terra firma-forme dermatosis is a relatively recently described entity that is much more common than might be expected when surveying the medical literature. With the very few reports found in the literature about TFFD, we believe that an increased awareness of this entity among primary care physicians would help decrease unnecessary worries or medical procedures, since TFFD lesions simply resolve by rubbing with isopropyl alcohol. PMID:20684734

  20. Free-form illumination optics

    NASA Astrophysics Data System (ADS)

    Mohedano, Rubén; Chaves, Julio; Hernández, Maikel

    2016-04-01

    In many illumination problems, the beam pattern needed and/or some geometrical constraints lead to very asymmetric design conditions. These asymmetries have been solved in the past by means of arrangements of rotationally symmetric or linear lamps aimed in different directions whose patterns overlap to provide the asymmetric prescriptions or by splitting one single lamp into several sections, each one providing a part of the pattern. The development of new design methods yielding smooth continuous free-form optical surfaces to solve these challenging design problems, combined with the proper CAD modeling tools plus the development of multiple axes diamond turn machines, give birth to a new generation of optics. These are able to offer the performance and other advanced features, such as efficiency, compactness, or aesthetical advantages, and can be manufactured at low cost by injection molding. This paper presents two examples of devices with free-form optical surfaces, a camera flash, and a car headlamp.

  1. Method of forming clathrate ice

    DOEpatents

    Hino, Toshiyuki; Gorski, Anthony J.

    1987-01-01

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  2. Method for forming hermetic seals

    NASA Technical Reports Server (NTRS)

    Gallagher, Brian D.

    1987-01-01

    The firmly adherent film of bondable metal, such as silver, is applied to the surface of glass or other substrate by decomposing a layer of solution of a thermally decomposable metallo-organic deposition (MOD) compound such as silver neodecanoate in xylene. The MOD compound thermally decomposes into metal and gaseous by-products. Sealing is accomplished by depositing a layer of bonding metal, such as solder or a brazing alloy, on the metal film and then forming an assembly with another high melting point metal surface such as a layer of Kovar. When the assembly is heated above the temperature of the solder, the solder flows, wets the adjacent surfaces and forms a hermetic seal between the metal film and metal surface when the assembly cools.

  3. Method of forming a joint

    DOEpatents

    Butt, Darryl Paul; Cutler, Raymond Ashton; Rynders, Steven Walton; Carolan, Michael Francis

    2006-08-22

    A method of joining at least two sintered bodies to form a composite structure, including providing a first multicomponent metallic oxide having a perovskitic or fluorite crystal structure; providing a second sintered body including a second multicomponent metallic oxide having a crystal structure of the same type as the first; and providing at an interface a joint material containing at least one metal oxide containing at least one metal identically contained in at least one of the first and second multicomponent metallic oxides. The joint material is free of cations of Si, Ge, Sn, Pb, P and Te and has a melting point below the sintering temperatures of both sintered bodies. The joint material is heated to a temperature above the melting point of the metal oxide(s) and below the sintering temperatures of the sintered bodies to form the joint. Structures containing such joints are also disclosed.

  4. Method of forming calthrate ice

    DOEpatents

    Hino, T.; Gorski, A.J.

    1985-09-30

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  5. Unsplit bipolar pulse forming line

    DOEpatents

    Rhodes, Mark A.

    2011-05-24

    A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  6. Studying how protein crystals form

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Watching molecules of the iron-storing protein apoferritin come together to form a nucleus reveals some interesting behavior. In this series of images, researchers observed clusters of four molecules at the corners of a diamond shape (top). As more molecules attach to the cluster, they arrange themselves into rods (second from top), and a raft-like configuration of molecules forms the critical nucleus (third from top), suggesting that crystal growth is much slower than it could be were the molecules arranged in a more compact formation. In the final image, a crystallite consisting of three layers containing approximately 60 to 70 molecules each is formed. Atomic force microscopy made visualizing the process of nucleation possible for the first time. The principal investigator is Peter Vekilov, of the University of Alabama in Huntsville. Vekilov's team at UAH studies protein solutions as they change phases from liquids to crystalline solids. They want to know if the molecules in the solution interact with one another, and if so, how, from the perspectives of thermodynamics and kinetics. They want to understand which forces -- electrical, electrostatic, hydrodynamic, or other kinds of forces -- are responsible for the interactions. They also study nucleation, the begirning stage of crystallization. This process is important to understand because it sets the stage for crystal growth in all kinds of solutions and liquid melts that are important in such diverse fields as agriculture, medicine, and the fabrication of metal components. Nucleation can determine the rate of crystal growth, the number of crystals that will be formed, and the quality and size of the crystals.

  7. Form development sample test matrix

    SciTech Connect

    Ebbinghaus, B B

    1999-10-15

    This document summarizes the status of sample fabrication and analysis in the Form Development Sample Test Matrix. Since its publication in the ''Baseline Formulation'' report (UCRL-ID- 133089, PIP-99-O 12) and in the ''Complete Single-Phase Sample Fabrications that Support the Licensing Application and Complete Process and Compositional Extreme Sample Fabrications that Support the Licensing Application'' report (PIP-99-078), the Sample Test Matrix has been updated and expanded. This version is current though September 30, 1999.

  8. Les péricardites tuberculeuses au centre hospitalier universitaire de Bobo-Dioulasso, Burkina Faso

    PubMed Central

    Yaméogo, Aimé Arsène; Kyelem, Carole Gilberte; Nikiéma, Zakari; Birba, Emile; Yaméogo, Téné Marceline; Zabsonré, Patrice

    2012-01-01

    Introduction La tuberculose constitue toujours un problème de santé publique. Sa localisation péricardique reste fréquente. L’objectif de cette étude rétrospective descriptive était de décrire les caractéristiques cliniques et évolutives des cas de péricardites tuberculeuses dans le service de cardiologie du centre hospitalier universitaire de Bobo-Dioulasso. Méthodes Nous avons mené une étude rétrospective descriptive des cas de péricardite tuberculeuse colligés en deux ans à partir des dossiers et registres dans le service de cardiologie du CHU de Bobo-Dioulasso de janvier 2009 à décembre 2010. Résultats De janvier 2009 à décembre 2010, parmi 945 hospitalisations dans le service de cardiologie, une péricardite tuberculeuse a été diagnostiquée chez dix patients âgés de 18 à 82 ans. L’âge moyen était de 46,8±25 ans avec un sexe ratio de un. Soixante pour cent des patients avaient moins de 40 ans. Tous les patients avaient un niveau socio-économique bas. Une notion de contage tuberculeux a été retrouvée chez six patients. Trois patients présentaient une tuberculose pulmonaire à microscopie positive. L’insuffisance cardiaque était constante chez tous les patients avec deux cas de tamponnade à l’admission ayant nécessité une ponction péricardique d’urgence. Tous les patients avaient une sérologie VIH négative. L’échocardiographie a été importante pour le diagnostic positif et dans la prise en charge. L’évolution sous traitement antituberculeux et de l’IC a été bonne chez neuf patients à la fin de la première phase du traitement antituberculeux. Un cas de décès a cependant été enregistré chez un patient avec une HTA déjà compliquée d’accident vasculaire cérébrale ischémique. Conclusion Les péricardiques tuberculeuses sont fréquentes au Burkina Faso. Elles touchent surtout les sujets jeunes et un intérêt particulier devrait être accordé au dépistage et au traitement précoce des

  9. Est-ce que le fumeur connaît les méfaits du tabac?

    PubMed Central

    Janah, Hicham; Elouazzani, Hanane; Souhi, Hicham; Naji-Amrani, Hicham; Zegmout, Adil; Rhorfi, Ismail Abderrahmani; Abid, Ahmed

    2014-01-01

    Le tabagisme est une des principales causes de morbidité et de mortalité évitable. Le but de ce travail est d’évaluer les connaissances du fumeur vis-à-vis les risques du tabac et son motivation pour cesser de fumer. Nous avons réalisé une enquête transversale chez les malades tabagiques hospitalisés au service en répondant à un questionnaire précisant leur niveau socio-économique et culturel, l'histoire du tabagisme, les méfaits connus du tabac, la dépendance pharmacologique à la nicotine et leur motivation pour cesser de fumer. Il s'agit de 120 patients, l’âge moyen était de 45 ans±15. Les principaux motifs d'hospitalisation étaient: pathologie tumorale (54%), pathologie infectieuse (35%) BPCO (9%). 85% des patients étaient scolarisés jusqu'au cycle secondaire. Pour l'ensemble des patients, l’âge moyen de la première cigarette était précoce (avant de 20 ans) et la dépendance pharmacologique à la nicotine était légère (82% avaient un score de Fagerström < 8). Plus d'un tiers des patients (38%) avaient au moins fait une tentative d'arrêt. La connaissance des effets néfastes du tabac était variable: les pathologies cancéreuses (88%), les maladies cardiovasculaires (65%) et la BPCO (31%). La majorité des patients (78%) avaient cessé de fumer depuis l'hospitalisation. Notre enquête met en évidence l'intérêt de la médiatisation dans l'information de la population sur les risques du tabac. Les pneumologues, qui prennent en charge la grande majorité de ces patients, doivent donc s'impliquer activement dans ce domaine. PMID:25745534

  10. How do atmospheric rivers form?

    NASA Astrophysics Data System (ADS)

    Dacre, Helen

    2015-04-01

    The term atmospheric river is used to describe corridors of strong water vapor transport in the troposphere. Filaments of enhanced water vapor, commonly observed in satellite imagery extending from the subtropics to the extratropics, are routinely used as a proxy for identifying these regions of strong water vapor transport. The precipitation associated with these filaments of enhanced water vapor can lead to high impact flooding events. However, there remains some debate as to how these filaments form. In this study we analyse the transport of water vapor within a climatology of wintertime North Atlantic extratropical cyclones. Results show that atmospheric rivers are formed by the cold front which sweeps up water vapor in the warm sector as it catches up with the warm front. This causes a narrow band of high water vapor content to form ahead of the cold front at the base of the warm conveyor belt airflow. Thus, water vapor in the cyclone's warm sector, and not long-distance transport of water vapor from the subtropics, is responsible for the generation of filaments of high water vapor content. A continuous cycle of evaporation and moisture convergence within the cyclone replenishes water vapor lost via precipitation. Thus, rather than representing a direct and continuous feed of moist air from the subtropics into the centre of a cyclone (as suggested by the term atmospheric river), these filaments are, in-fact, the result of water vapor exported from the cyclone and thus they represent the footprints left behind as cyclones travel polewards from subtropics.

  11. Coated particle waste form development

    SciTech Connect

    Oma, K.H.; Buckwalter, C.Q.; Chick, L.A.

    1981-12-01

    Coated particle waste forms have been developed as part of the multibarrier concept at Pacific Northwest Laboratory under the Alternative Waste Forms Program for the Department of Energy. Primary efforts were to coat simulated nuclear waste glass marbles and ceramic pellets with low-temperature pyrolytic carbon (LT-PyC) coatings via the process of chemical vapor deposition (CVD). Fluidized bed (FB) coaters, screw agitated coaters (SAC), and rotating tube coaters were used. Coating temperatures were reduced by using catalysts and plasma activation. In general, the LT-PyC coatings did not provide the expected high leach resistance as previously measured for carbon alone. The coatings were friable and often spalled off the substrate. A totally different concept, thermal spray coating, was investigated at PNL as an alternative to CVD coating. Flame spray, wire gun, and plasma gun systems were evaluated using glass, ceramic, and metallic coating materials. Metal plasma spray coatings (Al, Sn, Zn, Pb) provided a two to three orders-of-magnitude increase in chemical durability. Because the aluminum coatings were porous, the superior leach resistance must be due to either a chemical interaction or to a pH buffer effect. Because they are complex, coated waste form processes rank low in process feasibility. Of all the possible coated particle processes, plasma sprayed marbles have the best rating. Carbon coating of pellets by CVD ranked ninth when compared with ten other processes. The plasma-spray-coated marble process ranked sixth out of eleven processes.

  12. Rib forming tool for tubing

    DOEpatents

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  13. Dynamic Forms. Part 1: Functions

    NASA Technical Reports Server (NTRS)

    Meyer, George; Smith, G. Allan

    1993-01-01

    The formalism of dynamic forms is developed as a means for organizing and systematizing the design control systems. The formalism allows the designer to easily compute derivatives to various orders of large composite functions that occur in flight-control design. Such functions involve many function-of-a-function calls that may be nested to many levels. The component functions may be multiaxis, nonlinear, and they may include rotation transformations. A dynamic form is defined as a variable together with its time derivatives up to some fixed but arbitrary order. The variable may be a scalar, a vector, a matrix, a direction cosine matrix, Euler angles, or Euler parameters. Algorithms for standard elementary functions and operations of scalar dynamic forms are developed first. Then vector and matrix operations and transformations between parameterization of rotations are developed in the next level in the hierarchy. Commonly occurring algorithms in control-system design, including inversion of pure feedback systems, are developed in the third level. A large-angle, three-axis attitude servo and other examples are included to illustrate the effectiveness of the developed formalism. All algorithms were implemented in FORTRAN code. Practical experience shows that the proposed formalism may significantly improve the productivity of the design and coding process.

  14. Fuzzy logic of Aristotelian forms

    SciTech Connect

    Perlovsky, L.I.

    1996-12-31

    Model-based approaches to pattern recognition and machine vision have been proposed to overcome the exorbitant training requirements of earlier computational paradigms. However, uncertainties in data were found to lead to a combinatorial explosion of the computational complexity. This issue is related here to the roles of a priori knowledge vs. adaptive learning. What is the a-priori knowledge representation that supports learning? I introduce Modeling Field Theory (MFT), a model-based neural network whose adaptive learning is based on a priori models. These models combine deterministic, fuzzy, and statistical aspects to account for a priori knowledge, its fuzzy nature, and data uncertainties. In the process of learning, a priori fuzzy concepts converge to crisp or probabilistic concepts. The MFT is a convergent dynamical system of only linear computational complexity. Fuzzy logic turns out to be essential for reducing the combinatorial complexity to linear one. I will discuss the relationship of the new computational paradigm to two theories due to Aristotle: theory of Forms and logic. While theory of Forms argued that the mind cannot be based on ready-made a priori concepts, Aristotelian logic operated with just such concepts. I discuss an interpretation of MFT suggesting that its fuzzy logic, combining a-priority and adaptivity, implements Aristotelian theory of Forms (theory of mind). Thus, 2300 years after Aristotle, a logic is developed suitable for his theory of mind.

  15. Les fistules œsotrachéales congénitales isolées à propos de 2 cas

    PubMed Central

    El Biache, Imad; Lechqar, Maryem; Rami, Mohammed; Bouabdallah, Youssef

    2014-01-01

    Les auteurs rapportent 2 cas de fistules oesotrachéales isolées sans atrésie de l'oesophage, colligés au service de chirurgie pédiatrique au CHU Hassan II de Fès au Maroc entre 2008 et 2013. Il s'agit d'une anomalie rare représentée par un fin canal ascendant entre l'oesophage et la face postérieure de la trachée, à la hauteur du défilé cervico-thoracique. Elle se manifeste cliniquement par une symptomatologie respiratoire parfois digestive. Le diagnostic a été confirmé par le transit oesophagien dans les 2 cas et a permis aussi de déterminer le siège de la fistule. Le traitement était chirurgical, il a permis de supprimer la communication anormale entre l'oesophage et la trachée par un abord cervical avec interposition musculaire dans les 2 cas. Les suites post-opératoires et l’évolution à long terme étaient simples. Le but de ce travail est d'exposer les différents moyens diagnostique et thérapeutique. PMID:25328600

  16. Les accidents de cyclomoteurs: mécanismes lésionnels et aspects anatomo-cliniques

    PubMed Central

    Wade, Thomas Marcel Mbar; Ba, Papa Abdoulaye; Niane, Mamadou Moustapha; N'diaye, Malick Cissé; Konaté, Ibrahima; Touré, Cheikh Tidiane

    2015-01-01

    Le but de notre étude est de décrire les mécanismes lésionnels et les aspects anatomo-cliniques des traumatismes par accident de cyclomoteur. C'est une étude transversale menée au niveau du Centre Hospitalier Régional de Kaffrine sur une période de 12 mois. Elle portait sur les patients admis au service d'accueil pour accident de la voie publique impliquant un cyclomoteur. Il s'agissait de 129 patients (112 hommes et de 17 femmes). L’âge moyen était de 30,5 ans. Soixante-treize patients étaient conducteurs de cyclomoteur, 31 piétons et 25 passagers arrière. Le mécanisme le plus fréquent était une chute de moto. Les lésions prédominaient au niveau des membres. Les accidents de cyclomoteur sont un problème de santé publique. PMID:26668689

  17. 48 CFR 253.303 - Agency forms.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Agency forms. 253.303 Section 253.303 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CLAUSES AND FORMS FORMS Illustration of Forms 253.303 Agency forms. DoD forms...

  18. 48 CFR 253.303 - Agency forms.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Agency forms. 253.303 Section 253.303 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CLAUSES AND FORMS FORMS Illustration of Forms 253.303 Agency forms. DoD forms...

  19. 48 CFR 253.303 - Agency forms.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Agency forms. 253.303 Section 253.303 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CLAUSES AND FORMS FORMS Illustration of Forms 253.303 Agency forms. DoD forms...

  20. 48 CFR 253.303 - Agency forms.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Agency forms. 253.303 Section 253.303 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CLAUSES AND FORMS FORMS Illustration of Forms 253.303 Agency forms. DoD forms...

  1. Dispersion of particles in complex terrain: comparisons between WRF LES and simulations using different PBL schemes

    NASA Astrophysics Data System (ADS)

    Xue, L.; Kosovic, B.; Tessendorf, S. A.; Rasmussen, R.

    2015-12-01

    A key process in wintertime orographic cloud seeding using ground-based generators is the dispersion of silver iodide particles released from the generators in the mountainous area. The dispersion features determine the targeting efficiency and ultimately the seeding effect on the ground under favorable seeding conditions. Previous field experiments showed that the silver iodide plumes were narrow (spread angle was around 20 degrees) and were confined within the mountainous boundary layer (usually lower than 1 km AGL). The numerical simulation of the particle dispersion in complex terrain using weather models is challenging due to the stable atmosphere in winter, the unresolved terrain-flow interaction, and the inherent numerical diffusion close to the source point in the Eulerian framework. A recent study by Xue et al. (2014) showed that Large Eddy Simulation (LES) of the particle dispersion in complex terrain with grid spacing of 100 m could reproduce most observed features while simulations using PBL schemes with 500 m grid spacing had difficulty reproducing the vertical dispersion. This study will simulate the same case using the Weather Research and Forecasting (WRF) model in LES mode and with several PBL schemes. The differences between the LES-simulated dispersion results and the PBL results will be analyzed and presented. Especially, the difference attributed to the unrepresented sub-grid scale (SGS) topography information in the PBL will be studied in detail. The ultimate goal of this study is to incorporate the dispersion due to turbulent kinetic energy induced by SGS topography into the existing PBL schemes to better simulate the process in mountainous regions.

  2. Investigation of Unsteady Flow Behavior in Transonic Compressor Rotors with LES and PIV Measurements

    NASA Technical Reports Server (NTRS)

    Hah, Chunill; Voges, Melanie; Mueller, Martin; Schiffer, Heinz-Peter

    2009-01-01

    In the present study, unsteady flow behavior in a modern transonic axial compressor rotor is studied in detail with large eddy simulation (LES) and particle image velocimetry (PIV). The main purpose of the study is to advance the current understanding of the flow field near the blade tip in an axial transonic compressor rotor near the stall and peak-efficiency conditions. Flow interaction between the tip leakage vortex and the passage shock is inherently unsteady in a transonic compressor. Casing-mounted unsteady pressure transducers have been widely applied to investigate steady and unsteady flow behavior near the casing. Although many aspects of flow have been revealed, flow structures below the casing cannot be studied with casing-mounted pressure transducers. In the present study, unsteady velocity fields are measured with a PIV system and the measured unsteady flow fields are compared with LES simulations. The currently applied PIV measurements indicate that the flow near the tip region is not steady even at the design condition. This self-induced unsteadiness increases significantly as the compressor rotor operates near the stall condition. Measured data from PIV show that the tip clearance vortex oscillates substantially near stall. The calculated unsteady characteristics of the flow from LES agree well with the PIV measurements. Calculated unsteady flow fields show that the formation of the tip clearance vortex is intermittent and the concept of vortex breakdown from steady flow analysis does not seem to apply in the current flow field. Fluid with low momentum near the pressure side of the blade close to the leading edge periodically spills over into the adjacent blade passage. The present study indicates that stall inception is heavily dependent on unsteady behavior of the flow field near the leading edge of the blade tip section for the present transonic compressor rotor.

  3. An uncommon presentation: Creative commons at the 2012 LES winter meeting

    SciTech Connect

    Meike, Annamarie

    2012-01-06

    Have you noticed that the subject matter of our LES meetings is heavily oriented toward patent rights? There is more IP business in the area of patents, but it is important to keep an eye on copyright, whether for the purpose of influencing software copyright policy, or observing the development of interesting business models. So it is with pleasure that I see Catherine Casserly of the non-profit organization, Creative Commons (CC) is our Luncheon speaker for the 2012 Winter meeting in Anaheim.

  4. STS-65 Mission Specialist Chiao in LES at pre-test WETF bailout briefing

    NASA Technical Reports Server (NTRS)

    1994-01-01

    STS-65 Mission Specialist Leroy Chiao, outfitted in a launch and entry suit (LES) and launch and entry helmet (LEH), listens to a briefing on procedures that would become necessary in the event of an emergency egress situation from the Space Shuttle. The astronaut was in the Johnson Space Center's (JSC's) Weightless Environment Training Facility (WETF) Bldg 29 for the launch emergency egress training (bailout) exercise. Chiao will join five other NASA astronauts and a Japanese payload specialist for the second International Microgravity Laboratory 2 (IML-2) mission aboard the Space Shuttle Columbia, Orbiter Vehicle (OV) 102, later this year.

  5. Bob Meyer (right), acting deputy director of NASA Dryden, shakes hands with Les Bordelon, executive

    NASA Technical Reports Server (NTRS)

    2002-01-01

    Bob Meyer (on the right), acting deputy director of NASA's Dryden Flight Research Center, Edwards, California, shakes hands with Les Bordelon, executive director of Edwards Air Force Base. The handshake represents Dryden's acceptance of an Air Force C-20A delivered from Ramstein Air Base, Germany. The aircraft will be modified to carry equipment and experiments in support of both NASA and U.S. Air Force projects. The joint use of this aircraft is a result of the NASA Dryden/Edwards Air Force Base Alliance which shares some resources as cost-cutting measures.

  6. STS-56 MS1 Foale, in LES/LEH, floats during bailout exercises in JSC WETF

    NASA Technical Reports Server (NTRS)

    1993-01-01

    STS-56 Discovery, Orbiter Vehicle (OV) 103, Mission Specialist 1 (MS1) Michael Foale, wearing launch and entry suit (LES) and launch and entry helmet (LEH), floats in a single person life raft during launch emergency egress (bailout) exercises in JSC's Weightless Environment Training Facility (WETF) Bldg 29 pool. Foale's body is covered with the life raft tarp. His head and the space shuttle search and rescue satellite aided tracking (SARSAT) antenna protrude above the tarp. This simulation prepares the astronauts for the event of an emergency egress and subsequent water landing during launch.

  7. STS-56 MS3 Ochoa, in LES/LEH, uses sky genie during JSC egress training

    NASA Technical Reports Server (NTRS)

    1992-01-01

    STS-56 Discovery, Orbiter Vehicle (OV) 103, Mission Specialist 3 (MS3) Ellen Ochoa, wearing launch and entry suit (LES) and launch and entry helmet (LEH), simulates a emergency egress procedure at JSC's Mockup and Integration Laboratory (MAIL) Bldg 9NE. Having exited the crew compartment trainer (CCT), a shuttle mockup, through an overhead aft flight deck window, Ochoa lowers herself to the ground using the sky-genie. Training instructor Kenneth D. Trujillo assumes the role of a crewmate assisting from a position on the ground. The sky-genie is carried on all Space Shuttle flights for emergency egress purposes.

  8. STS-65 Payload Specialist Mukai dons LES and parachute with technicians' help

    NASA Technical Reports Server (NTRS)

    1994-01-01

    STS-65 Payload Specialist Chiaki Mukai adjusts the neck dam of her launch and entry suit (LES) as Boeing's Sharon Daley and Grady Due help her with the parachute pack prior to a launch emergency egress training (bailout) exercise at the Johnson Space Center's (JSC's) Weightless Environment Training Facility (WETF) Bldg 29. Mukai will join six NASA astronauts later this year for two weeks aboard the Space Shuttle Columbia, Orbiter Vehicle (OV) 102, in support of the second International Microgravity Laboratory 2 (IML-2) mission. Mukai represents Japan's National Space Development Agency (NASDA).

  9. A Unified LES/RANS Approach Using the CE/SE Method

    NASA Technical Reports Server (NTRS)

    Liou, William W.; Chang, Sin-Chung (Technical Monitor)

    2002-01-01

    The goal of the proposed research is to develop advanced large eddy simulations (LES) and Reynolds average Navier-Stokes (RANS) capabilities for complex problems using the conservation element and solution element (CE/SE) method. This proposed use of the CE/SE method is justified by the many demonstrated advantages of the CE/SE method over the traditional computational fluid dynamics (CFD) methods. The proposed research will produce improved engineering modeling for near-term applications for focus programs as well as long-term impacts on the fundamental understanding of turbulence.

  10. STS-56 Pilot Oswald, in LES/LEH, uses sky genie during JSC egress training

    NASA Technical Reports Server (NTRS)

    1992-01-01

    STS-56 Discovery, Orbiter Vehicle (OV) 103, Pilot Stephen S. Oswald, wearing launch and entry suit (LES) and launch and entry helmet (LEH), simulates an emergency egress procedure at JSC's Mockup and Integration Laboratory (MAIL) Bldg 9NE. Having exited the crew compartment trainer (CCT), a shuttle mockup, through an overhead aft flight deck window, Oswald lowers himself to the ground using the sky-genie. Training instructor Kenneth D. Trujillo assumes the role of a crewmate assisting from a position on the ground. The sky-genie is carried on all Space Shuttle flights for emergency egress purposes.

  11. STS-65 Mission Specialist Walz dons LES for MAIL Bldg 9NE egress training

    NASA Technical Reports Server (NTRS)

    1994-01-01

    STS-65 Mission Specialist Carl E. Walz adjusts the neck dam on his launch and entry suit (LES) as a technician zips up the suit back. Walz is preparing for a training session in Johnson Space Center's (JSC's) Mockup and Integration Laboratory (MAIL) Bldg 9NE. The entire crew was on hand for egress training and countdown rehearsals. Walz will join five other NASA astronauts and a Japanese payload specialist for the International Microgravity Laboratory 2 (IML-2) mission aboard the Space Shuttle Columbia, Orbiter Vehicle (OV) 102, later this year.

  12. STS-65 Pilot Halsell dons LES for MAIL Bldg 9NE egress training

    NASA Technical Reports Server (NTRS)

    1994-01-01

    STS-65 Pilot James D. Halsell, Jr, attired in the partial pressure launch and entry suit (LES), prepares to practice emergency escape procedures. Halsell, here receiving assistance from Boeing's David Brandt, joined his six STS-65 crewmates at the Johnson Space Center's (JSC's) Mockup and Integration Laboratory (MAIL) Bldg 9NE for the egress training session. Halsell will join five other NASA astronauts and a Japanese payload specialist for the International Microgravity Laboratory 2 (IML-2) mission aboard the Space Shuttle Columbia, Orbiter Vehicle (OV) 102, later this year.

  13. STS-65 Payload Specialist Mukai in LES with Rockwell's Scott Gill at WETF

    NASA Technical Reports Server (NTRS)

    1994-01-01

    STS-65 Payload Specialist Chiaki Mukai, outfitted in a launch and entry suit (LES) and clamshell helmet, is assisted by Rockwell's Charles S. Gill prior to a launch emergency egress training (bailout) exercise at the Johnson Space Center's (JSC's) Weightless Environment Training Facility (WETF) Bldg 29. Mukai was joined by six NASA astronauts for the training session. Mukai, representing Japan's National Space Development Agency (NASDA), along with the STS-65 crew will spend approximately two weeks aboard the Space Shuttle Columbia, Orbiter Vehicle (OV) 102, later this year in support of the second International Microgravity Laboratory 2 (IML-2) mission.

  14. Performance testing of thermoelectric generators including Voyager and LES 8/9 flight results

    NASA Technical Reports Server (NTRS)

    Garvey, L.; Stapfer, G.

    1979-01-01

    Several thermoelectric generators ranging in output power from 0.5 to 155 W have been completed or are undergoing testing at JPL. These generators represent a wide range of technologies, using Bi2Te3, PbTe and SiGe thermoelectric materials. Several of these generators are of a developmental type, such as HPG S/N2, and others are representative of Transit and Multi-Hundred Watt (MHW) Technology. Representative flight performance data of LES 8/9 and Voyager RTG's are presented and compared with the DEGRA computer program based on the data observed from tests of SiGe couples, modules and MHW generators.

  15. Evaluation of atmosphere-land interactions in an LES from the perspective of heterogeneity propagation

    NASA Astrophysics Data System (ADS)

    Liu, Shaofeng; Hintz, Michael; Li, Xiaolong

    2016-05-01

    Atmosphere-land interactions simulated by an LES model are evaluated from the perspective of heterogeneity propagation by comparison with airborne measurements. It is found that the footprints of surface heterogeneity, though as 2D patterns can be dissipated quickly due to turbulent mixing, as1D projections can persist and propagate to the top of the atmospheric boundary layer. Direct comparison and length scale analysis show that the simulated heterogeneity patterns are comparable to the observation. The results highlight the model's capability in simulating the complex effects of surface heterogeneity on atmosphere-land interactions.

  16. STS-32 MS Dunbar wearing LES prepares for WETF water egress training

    NASA Technical Reports Server (NTRS)

    1989-01-01

    STS-32 Mission Specialist (MS) Bonnie J. Dunbar, wearing a launch and entry suit (LES), orange parachute harness and life vest, is briefed on emergency egress procedures in JSC's Weightless Environment Training Facility (WETF) Bldg 29. During the exercises the crew practiced the procedures to follow in the event of an emergency aboard the Space Shuttle and familiarized themselves with post-Challenger pole system of emergency egress. The crewmembers will simulate parachuting into water by using the WETF's nearby 25 ft deep pool.

  17. Influence of Computational Drop Representation in LES of a Droplet-Laden Mixing Layer

    NASA Technical Reports Server (NTRS)

    Bellan, Josette; Radhakrishnan, Senthilkumaran

    2013-01-01

    Multiphase turbulent flows are encountered in many practical applications including turbine engines or natural phenomena involving particle dispersion. Numerical computations of multiphase turbulent flows are important because they provide a cheaper alternative to performing experiments during an engine design process or because they can provide predictions of pollutant dispersion, etc. Two-phase flows contain millions and sometimes billions of particles. For flows with volumetrically dilute particle loading, the most accurate method of numerically simulating the flow is based on direct numerical simulation (DNS) of the governing equations in which all scales of the flow including the small scales that are responsible for the overwhelming amount of dissipation are resolved. DNS, however, requires high computational cost and cannot be used in engineering design applications where iterations among several design conditions are necessary. Because of high computational cost, numerical simulations of such flows cannot track all these drops. The objective of this work is to quantify the influence of the number of computational drops and grid spacing on the accuracy of predicted flow statistics, and to possibly identify the minimum number, or, if not possible, the optimal number of computational drops that provide minimal error in flow prediction. For this purpose, several Large Eddy Simulation (LES) of a mixing layer with evaporating drops have been performed by using coarse, medium, and fine grid spacings and computational drops, rather than physical drops. To define computational drops, an integer NR is introduced that represents the ratio of the number of existing physical drops to the desired number of computational drops; for example, if NR=8, this means that a computational drop represents 8 physical drops in the flow field. The desired number of computational drops is determined by the available computational resources; the larger NR is, the less computationally

  18. STS-36 Commander Creighton in LES outside CCT side hatch during JSC training

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Standing on an inflated cushion outside the side hatch of the crew compartment trainer (CCT), STS-36 Commander John O. Creighton, wearing launch and entry suit (LES), smiles before climbing into the shuttle mockup. The crew escape system (CES) pole extends beyond the side hatch opening. Mission Specialist (MS) Richard M. Mullane is seen at the lower corner of the frame rolling on the safety cushion. CCT is located in JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A. The crewmembers are practicing egress procedures that might be necessary in the event of an emergency aboard the shuttle.

  19. STS-32 MS Dunbar wearing LES floats in life raft during water egress training

    NASA Technical Reports Server (NTRS)

    1989-01-01

    STS-32 Mission Specialist (MS) Bonnie J. Dunbar, wearing a launch and entry suit (LES) and lauch and entry helmet (LEH), in a single-occupant (one man) lift raft enlists the aid of two SCUBA-equipped divers as she floats in 25 ft deep pool located in JSC's Weightless Environment Training Facility (WETF) Bldg 29. During the exercises the crew practiced the procedures to follow in the event of an emergency aboard the Space Shuttle and familiarized themselves with post-Challenger pole system of emergency egress.

  20. Sea breeze analysis based on LES simulations and the particle trace calculations in MM21 district

    NASA Astrophysics Data System (ADS)

    Sugiyama, Toru; Soga, Yuta; Goto, Koji; Sadohara, Satoru; Takahashi, Keiko

    2016-04-01

    We have performed thermal and wind environment LES simulations in MM21 district in Yokohama. The used simulation model is MSSG (Multi-Scale Simulator for the Geo-environment). The spatial resolution is about 5[m] in horizontal and vertical axis. We have also performed the particle trace calculations in order to investigate the route of the sea-breeze. We have found the cool wind is gradually warmed/heated up as flowing into the district, then it blows up and is diffused. We will also discuss the contributions of the DHC (District Heating & Cooling) system in the area.

  1. STS-57 PLC G. David Low, in LES, listens to egress briefing at JSC's MAIL

    NASA Technical Reports Server (NTRS)

    1993-01-01

    STS-57 Endeavour, Orbiter Vehicle (OV) 105, Payload Commander (PLC) and Mission Specialist (MS) G. David Low, wearing launch and entry suit (LES), smiles for the photographer during an emergency egress briefing. Low, along with the other STS-57 crewmembers, will participate in an emergency egress simulation in JSC's Crew Compartment Trainer (CCT) to familiarize himself with the procedures necessary in the event of an emergency during launch or landing aboard the space shuttle. The CCT is located in JSC's Mockup and Integration Laboratory (MAIL) Bldg 9NE.

  2. STS-48 Commander Creighton, in LES, uses sky genie during JSC egress exercise

    NASA Technical Reports Server (NTRS)

    1991-01-01

    STS-48 Discovery, Orbiter Vehicle (OV) 103, Commander John O. Creighton, wearing a launch and entry suit (LES) and launch and entry helmet (LEH), works his way to the ground using a sky genie device. Creighton exited JSC's Full Fuselage Trainer (FFT) via an aft flight deck overhead window and lowers himself to the ground as technicians assist and look on. Creighton, along with the other crewmembers, participated in post-landing emergency egress procedures in the Mockup and Integration Laboratory (MAIL) Bldg 9A.

  3. STS-36 MS Thuot in LES during JSC emergency egress training

    NASA Technical Reports Server (NTRS)

    1989-01-01

    STS-36 Mission Specialist (MS) Pierre J. Thuot, wearing launch and entry suit (LES), observes emergency egress procedures before participating in them during a training exercise held at JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A. Thuot, along with his fellow crewmembers, was briefed in egress procedures to follow in the event of an emergency aboard the shuttle during launch and landing sequences. The crewmembers practiced the egress procedures in preparation for their upcoming Department of Defense (DOD) flight aboard Atlantis, Orbiter Vehicle (OV) 104.

  4. CERAMIC WASTE FORM DATA PACKAGE

    SciTech Connect

    Amoroso, J.; Marra, J.

    2014-06-13

    The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600{degrees}C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700{degrees}C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600{degrees}C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

  5. Understanding and Explanation in France: From Maine de Biran's Méthode Psychologique to Durkheim's Les Formes Élémentaires de la vie Religieuse

    NASA Astrophysics Data System (ADS)

    Schmaus, Warren

    My task here is to compare the ways in which the relations between the human and the natural sciences were conceived in late nineteenth and early twentieth century France and Germany. Historical generalization may be a mug's game. But if I had to generalize, I would say that the French distinguished the human or cultural sciences from the natural sciences only in terms of their subject matters, while the Germans were more likely to try to distinguish them in terms of their goals, methods, foundations, and normative content as well. Although we may be able to find many philosophical positions among the French that resemble certain aspects of the thought of Wilhelm Dilthey, Wilhelm Windelband, or Heinrich Rickert, no one in France held exactly the same combination of philosophical views concerning the human sciences as that held by any of these German thinkers. In particular, no one in France tried to distinguish the human from the natural sciences in terms of understanding versus explanation in the way that Dilthey did. Thus, although there were other disputes in France in regard to the human sciences, such as that between Émile Durkheim and Gabriel Tarde over the role of psychology in sociological explanation, or that between sociologists and philosophers over the methods of ethics, there was no controversy analogous to the conflict among Dilthey, Windelband, and Rickert over the best way to distinguish the human from the natural sciences.

  6. FORMING PROTECTIVE FILMS ON METAL

    DOEpatents

    Gurinsky, D.H.; Kammerer, O.F.; Sadofsky, J.; Weeks, J.R.

    1958-12-16

    Methods are described of inhibiting the corrosion of ferrous metal by contact with heavy liquid metals such as bismuth and gallium at temperatures above 500 icient laborato C generally by bringing nltrogen and either the metal zirconium, hafnium, or titanium into reactlve contact with the ferrous metal to form a thin adherent layer of the nitride of the metal and thereafter maintaining a fractional percentage of the metal absorbed in the heavy liquid metal in contact with the ferrous metal container. The general purpose for uslng such high boiling liquid metals in ferrous contalners would be as heat transfer agents in liquid-metal-fueled nuclear reactors.

  7. Formes hémorragiques de Dengue observées dans le service des maladies infectieuses du CHU Yalgado Ouédraogo, Burkina Faso

    PubMed Central

    Mamoudou, Savadogo; Boushab, Boushab Mohamed

    2016-01-01

    La dengue est une arbovirose ré émergente dans les pays tropicaux. Sa forme hémorragique peut s'accompagner d'une défaillance circulatoire pouvant conduire à un choc hypovolémique, souvent fatal. Nous rapportons une série de trois cas de formes hémorragiques de dengue observées dans le service des maladies infectieuses du CHU Yalgado Ouédraogo de Ouagadougou dont l'objectif est de décrire les caractéristiques épidémiologiques cliniques et évolutives. Les cas étaient des jeunes de sexe féminin dont l’âge variait entre 27 ans et 43 ans, résidant dans la ville de Ouagadougou. Malgré de multiples transfusions de concentrées plaquettaires et un traitement symptomatique, nous déplorons un cas de décès. Le développement d'antiviraux et la mise au point de nouveaux vaccins constituent une lueur d'espoir pour prévenir la létalité due à cette maladie. PMID:27303584

  8. Une étude cas-témoins pour déterminer les facteurs de non-observance du suivi médical chez les patients diabétiques à Kinshasa, en 2010

    PubMed Central

    Mense, Kennedy; Mapatano, Mala Ali; Mutombo, Paulin Beya; Muyer, Marie Claire

    2014-01-01

    Introduction Le diabète est un problème majeur de santé publique et un fardeau économique mondial qui n’épargne pas la RD-Congo. Bien que sa prise en charge soit codifiée, la plupart des diabétiques n'arrivent pas à respecter les rendez-vous de suivi. Cette étude vise principalement à identifier les déterminants de la non-observance du suivi médical chez les diabétiques à Kinshasa. Méthodes Il s'agit d'une étude cas-témoins où les cas sont les patients diabétiques non observant le suivi médical et les témoins, ceux répondant régulièrement au suivi médical. Couvrant la période du 1erjanvier au 31 décembre 2010, l’étude a porté sur un échantillon aléatoire de 154 sujets répartis entre 77 cas et 77 témoins. Résultats Les données indiquent une association entre la non-observance du suivi médical et le revenu (niveau de vie) des ménages. Les cas provenant des ménages à faible revenu courent six fois plus le risque d’être non-observants. Par contre, entre le niveau de connaissance et la non-observance l'association notée n’était pas statistiquement significative. Le respect des rendez-vous pourrait être amélioré de 77% si le revenu des ménages des diabétiques était augmenté. Le coût total mensuel du suivi médical est estimé à 27,2 USD, alors que le revenu permanant des ménages se situe à 306,6 USD. Conclusion Le bas niveau de vie mais pas celui de l'ignorance est un déterminant de la non-observance des visites de suivi du malade diabétique. PMID:25309658

  9. Les aspects des frottis cervico-vaginaux chez les femmes vivants avec le VIH suivies à Thiès/Sénégal et association avec le degré d'immunodépression

    PubMed Central

    Bammo, Mariama; Dioussé, Pauline; Thiam, Marietou; Diop, Madoky Maguatte; Berthe, Adama; Faye, Flugence Abdou; Diallo, Thierno Abdoul Aziz; Sarr, Fatou Seck; Dione, Haby; Toure, Papa Souleymane; Diop, Bernard Marcel; Ka, Mamadou Mortalla

    2015-01-01

    De nombreuses études ont démontré que les femmes infectées par le VIH ont un risque accru de survenue de néoplasies cervicales intra épithéliales. L'association entre les deux affections étant bidirectionnelle, l'objectif était de décrire les anomalies cervicales chez les femmes séropositives au virus de l'immunodéficience humaine (VIH), de rechercher des facteurs associés et de proposer des recommandations en termes de suivi de ces femmes. Il s'agissait d'une étude transversale, multicentrique recensant l'ensemble des frottis cervico-vaginaux (FCV) et des colposcopies des patientes infectées par le VIH entre 2012 et 2014 dans les services de dermatologie de Thiès et de Mbour. Les données étaient recueillies et analysées par le logiciel EPI Info 2012 version 3.5.4. Les tests statistiques ont été effectués avec un seuil de significativité p <0,05. Etaient inclus 125 patientes. L’âge moyen était de 38,98 ± 10.2 ans [20-77]. Il n'y avait aucun signe d'appels dans 82.4%. Le FCV était normal dans 32.8%, inflammatoire dans 44.8%. Les anomalies cytologiques concernaient 22,4% dont, ASC-H (suspicion de lésions de haut grade: 2.4%), LSIL (lésions de bas grade: 8.8%), HSIL (lésions de haut grade: 4%). Leur majorité (60.7%) avaient un taux de CD4 < 500 et étaient au stade 3 de l'OMS dans 64.3%; la biopsie montrait une dysplasie sévère chez 37.5% des patientes ayant pu réaliser cet examen. Deux patientes ont bénéficié d'un traitement curatif notamment l'exérèse chirurgicale. La survenue de dysplasies cervicales même précoces semble être associée à un stade avancé de l'infection VIH. Un dépistage et un traitement précoces sont absolument nécessaires. PMID:26834915

  10. Modélisation des charges d'espace dans les isolants solides par une analyse spectrale

    NASA Astrophysics Data System (ADS)

    Haas, V.; Scouarnec, Ch.; Franceschi, J. L.

    1998-01-01

    A mathematical method based on spectral algebra is developped for the thermal modulation method. These methods permit to measure the space charge distribution in solid insulators. The modelling presented permits to evaluate the performances and the limitations of the measurement method. Une linéarisation par l'algèbre spectrale a été développée dans une méthode de modulation thermique pour mesurer la distribution des charges électriques dans les isolants solides. La modélisation présentée permet d'évaluer les performances et les limites tant numériques que physiques de la méthode de mesure.

  11. Les observateurs

    NASA Astrophysics Data System (ADS)

    Ponsard, P.

    2014-09-01

    Nore observatoire de Nandrin vous attend - Comète Jacques (C/2014 E2) - Nuages noctulescents - L’observatoire de Cointe vu du monument interalliés - Orage sur la province de Liège - La police de Liège à l’heure des rendez-vous célestes

  12. Gravity, light and plant form

    NASA Technical Reports Server (NTRS)

    Hangarter, R. P.

    1997-01-01

    Plants have evolved highly sensitive and selective mechanisms that detect and respond to various aspects of their environment. As a plant develops, it integrates the environmental information perceived by all of its sensory systems and adapts its growth to the prevailing environmental conditions. Light is of critical importance because plants depend on it for energy and, thus, survival. The quantity, quality and direction of light are perceived by several different photosensory systems that together regulate nearly all stages of plant development, presumably in order to maintain photosynthetic efficiency. Gravity provides an almost constant stimulus that is the source of critical spatial information about its surroundings and provides important cues for orientating plant growth. Gravity plays a particularly important role during the early stages of seedling growth by stimulating a negative gravitropic response in the primary shoot that orientates it towards the source of light, and a positive gravitropic response in the primary root that causes it to grow down into the soil, providing support and nutrient acquisition. Gravity also influences plant form during later stages of development through its effect on lateral organs and supporting structures. Thus, the final form of a plant depends on the cumulative effects of light, gravity and other environmental sensory inputs on endogenous developmental programs. This article is focused on developmental interactions modulated by light and gravity.

  13. Friction-formed liquid droplets

    NASA Astrophysics Data System (ADS)

    Lockwood, A. J.; Anantheshwara, K.; Bobji, M. S.; Inkson, B. J.

    2011-03-01

    The formation of nanoscale liquid droplets by friction of a solid is observed in real-time. This is achieved using a newly developed in situ transmission electron microscope (TEM) triboprobe capable of applying multiple reciprocating wear cycles to a nanoscale surface. Dynamical imaging of the nanoscale cyclic rubbing of a focused-ion-beam (FIB) processed Al alloy by diamond shows that the generation of nanoscale wear particles is followed by a phase separation to form liquid Ga nanodroplets and liquid bridges. The transformation of a two-body system to a four-body solid-liquid system within the reciprocating wear track significantly alters the local dynamical friction and wear processes. Moving liquid bridges are observed in situ to play a key role at the sliding nanocontact, interacting strongly with the highly mobile nanoparticle debris. In situ imaging demonstrates that both static and moving liquid droplets exhibit asymmetric menisci due to nanoscale surface roughness. Nanodroplet kinetics are furthermore dependent on local frictional temperature, with solid-like surface nanofilaments forming on cooling. TEM nanotribology opens up new avenues for the real-time quantification of cyclic friction, wear and dynamic solid-liquid nanomechanics, which will have widespread applications in many areas of nanoscience and nanotechnology.

  14. Preventing Ice Before it Forms

    NASA Technical Reports Server (NTRS)

    2006-01-01

    In the late 1990s, a team of engineers at Ames Research Center invented an anti-icing fluid to keep ice from building up on airplane wings. Ice on wings can be a serious safety hazard, especially during takeoff, when a sheet of ice the thickness of a compact disc can reduce lift by 25 percent or more. The typical approach to clearing off the ice is to use a deicing solution once the ice has built up. The fluid created by the Ames team, though, when applied to a dry surface, prevents the ice from even forming a surface bond, which saves deicing time and money, while also preventing excessive use of chemical solvents. If, however, the solution is not applied before ice forms, it also serves as a traditional deicing formula. The formula contains propylene glycol, which has a very low freezing point, and a thickener, which helps the fluid adhere to the surface. Ice gathers on top of the formula, and then it can be wiped off with little effort. This thickening agent, a pseudo-plastic, sprays on as a liquid, like lemonade, gels like a lemon sherbet, turns back to a liquid when wiped, and then gels again into its sherbet consistency when left to solidify. The sherbet-gel stage is especially important when the formula is sprayed onto a vertical or steeped surface, as it clings better than a liquid would.

  15. Integrally formed radio frequency quadrupole

    DOEpatents

    Abbott, Steven R.

    1989-01-01

    An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

  16. Effets potentiels d’un modèle rationnel de prescription sur les dépenses nationales en santé

    PubMed Central

    Littman, Jordan; Halil, Roland

    2016-01-01

    Résumé Objectif Estimer les économies que pourrait engendrer la mise en œuvre d’un modèle rationnel de prescription pour des classes de médicaments équivalents sur les plans de l’efficacité, de la toxicité et de la commodité. Conception L’Institut canadien d’information sur la santé a fourni des renseignements sur les 10 principales classes de médicaments en fonction des dépenses annuelles qui leur sont attribuables. Ces classes ont été examinées en vue de leur inclusion potentielle dans l’étude selon qu’il était possible de comparer les médicaments à l’intérieur d’une même classe. Lorsqu’à la suite d’une recherche documentaire, une équivalence a été établie en fonction de l’efficacité, de la toxicité et de la commodité des médicaments, les données annuelles sur les prescriptions ont été recueillies à partir de la base de données du Système national d’information sur l’utilisation des médicaments prescrits. Les économies potentielles de coûts ont ensuite été calculées en comparant les parts de marché actuelles avec les parts potentielles futures de ce marché. Contexte Le Canada. Principaux paramètres à l’étude Les différences estimées dans les dépenses que produirait un modèle rationnel de prescription. Résultats Une équivalence a été établie sur les plans de l’efficacité, de la toxicité et de la commodité dans les classes de statines, d’inhibiteurs de la pompe à protons, d’inhibiteurs de l’enzyme de conversion de l’angiotensine et d’inhibiteurs sélectifs du recaptage de l’angiotensine. Les dépenses annuelles totales dans ces classes se situent à 856 millions $ dans les programmes publics de médicaments et à 1,97 milliard $ environ à l’échelle nationale. Grâce à des prescriptions rationnelles, on estime que les économies annuelles pourraient atteindre 222 millions $ pour les programmes publics et 521 millions $ à l’échelle nationale. Conclusion La

  17. LES-based characterization of a suction and oscillatory blowing fluidic actuator

    NASA Astrophysics Data System (ADS)

    Kim, Jeonglae; Moin, Parviz

    2015-11-01

    Recently, a novel fluidic actuator using steady suction and oscillatory blowing was developed for control of turbulent flows. The suction and oscillatory blowing (SaOB) actuator combines steady suction and pulsed oscillatory blowing into a single device. The actuation is based upon a self-sustained mechanism of confined jets and does not require any moving parts. The control output is determined by a pressure source and the geometric details, and no additional input is needed. While its basic mechanisms have been investigated to some extent, detailed characteristics of internal turbulent flows are not well understood. In this study, internal flows of the SaOB actuator are simulated using large-eddy simulation (LES). Flow characteristics within the actuator are described in detail for a better understanding of the physical mechanisms and improving the actuator design. LES predicts the self-sustained oscillations of the turbulent jet. Switching frequency, maximum velocity at the actuator outlets, and wall pressure distribution are in good agreement with the experimental measurements. The computational results are used to develop simplified boundary conditions for numerical experiments of active flow control. Supported by the Boeing company.

  18. Statistical analysis of an LES shallow cumulus cloud ensemble using a cloud tracking algorithm

    NASA Astrophysics Data System (ADS)

    Dawe, J. T.; Austin, P. H.

    2012-01-01

    A technique for the tracking of individual clouds in a Large Eddy Simulation (LES) is presented. We use this technique on an LES of a shallow cumulus cloud field based upon the Barbados Oceanographic and Meteorological Experiment (BOMEX) to calculate statistics of cloud height, lifetime, and other physical properties for individual clouds in the model. We also examine the question of nature versus nurture in shallow cumulus clouds: do properties at cloud base determine the upper-level properties of the clouds (nature), or are cloud properties determined by the environmental conditions they encounter (nurture). We find that clouds which ascend through an environment that has been pre-moistened by previous cloud activity are no more likely to reach the inversion than clouds that ascend through a drier environment. Cloud base thermodynamic properties are uncorrelated with upper-level cloud properties, while mean fractional entrainment and detrainment rates display moderate correlations with cloud properties up to the inversion. Conversely, cloud base area correlates well with upper-level cloud area and maximum cloud height. We conclude that cloud thermodynamic properties are primarily influenced by entrainment and detrainment processes, cloud area and height are primarily influenced by cloud base area, and thus nature and nurture both play roles in the dynamics of BOMEX shallow cumulus clouds.

  19. Statistical analysis of a LES shallow cumulus cloud ensemble using a cloud tracking algorithm

    NASA Astrophysics Data System (ADS)

    Dawe, J. T.; Austin, P. H.

    2011-08-01

    A technique for the tracking of individual clouds in a Large Eddy Simulation (LES) is presented. We use this technique on a LES of a shallow cumulus cloud field based upon the Barbados Oceanographic and Meteorological Experiment (BOMEX) to calculate statistics of cloud height, lifetime, and other physical properties for individual clouds in the model. We also examine the question of nature versus nurture in shallow cumulus clouds: do properties at cloud base determine the upper-level properties of the clouds (nature), or are cloud properties determined by the environmental conditions they encounter (nurture). We find that clouds which ascend through an environment that has been pre-moistened by previous cloud activity are no more likely to reach the inversion than clouds that ascend through a drier environment. Cloud base thermodynamic properties are uncorrelated with upper-level cloud properties, while mean fractional entrainment and detrainment rate displays moderate correlations with cloud properties up to the inversion. Conversely, cloud base area correlates well with upper-level cloud area and maximum cloud height. We conclude that cloud thermodynamic properties are primarily influenced by entrainment and detrainment processes, cloud area and height are primarily influenced by cloud base area, and thus nature and nurture both play roles in the dynamics of BOMEX shallow cumulus clouds.

  20. Advanced Signal Processing for Integrated LES-RANS Simulations: Anti-aliasing Filters

    NASA Technical Reports Server (NTRS)

    Schlueter, J. U.

    2003-01-01

    Currently, a wide variety of flow phenomena are addressed with numerical simulations. Many flow solvers are optimized to simulate a limited spectrum of flow effects effectively, such as single parts of a flow system, but are either inadequate or too expensive to be applied to a very complex problem. As an example, the flow through a gas turbine can be considered. In the compressor and the turbine section, the flow solver has to be able to handle the moving blades, model the wall turbulence, and predict the pressure and density distribution properly. This can be done by a flow solver based on the Reynolds-Averaged Navier-Stokes (RANS) approach. On the other hand, the flow in the combustion chamber is governed by large scale turbulence, chemical reactions, and the presence of fuel spray. Experience shows that these phenomena require an unsteady approach. Hence, for the combustor, the use of a Large Eddy Simulation (LES) flow solver is desirable. While many design problems of a single flow passage can be addressed by separate computations, only the simultaneous computation of all parts can guarantee the proper prediction of multi-component phenomena, such as compressor/combustor instability and combustor/turbine hot-streak migration. Therefore, a promising strategy to perform full aero-thermal simulations of gas-turbine engines is the use of a RANS flow solver for the compressor sections, an LES flow solver for the combustor, and again a RANS flow solver for the turbine section.