Science.gov

Sample records for lexus rx400h-2575 hybrid

  1. 2006 Lexus RX400h-2575 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect

    Tyler Gray; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's Advanced Vehicle Testing Activity conducts several different types of tests on hybrid electric vehicles, including testing hybrid electric vehicles batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of accelerated testing. This report documents the battery testing performed and battery testing results for the 2007 Lexus RX900h hybrid electric vehicle (Vin Number JTJHW31U660002575). Testing was performed by the Electric Transportation Engineering Corporation. The Advanced Vehicle Testing Activity is part of the U.S. Department of Energy's Vehicle Technologies Program. The Idaho National Laboratory and the Electric Transportation Engineering Corporation conduct Advanced Vehicle Testing Activity for the U.S. Department of Energy.

  2. 2006 Lexus RX400h-4807 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect

    Tyler Gray; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's Advanced Vehicle Testing Activity conducts several different types of tests on hybrid electric vehicles, including testing hybrid electric vehicles batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of accelerated testing. This report documents the battery testing performed and battery testing results for the 2007 Lexus RX900h hybrid electric vehicle (Vin Number JTJHW31U660004807). Testing was performed by the Electric Transportation Engineering Corporation. The Advanced Vehicle Testing Activity is part of the U.S. Department of Energy's Vehicle Technologies Program. The Idaho National Laboratory and the Electric Transportation Engineering Corporation conduct Advanced Vehicle Testing Activity for the U.S. Department of Energy.

  3. Evaluation of the 2008 Lexus LS 600H Hybrid Synergy Drive System

    SciTech Connect

    Burress, T.A.; Coomer, C.L.; Campbell, S.L.; Wereszczak, A.A.; Cunningham, J.P.; Marlino, L.D.; Seiber, L.E.; Lin, H.T.

    2009-01-15

    Subsystems of the 2008 Lexus 600h hybrid electric vehicle (HEV) were studied and tested as part of an intensive benchmarking effort carried out to produce detailed information concerning the current state of nondomestic alternative vehicle technologies. Feedback provided by benchmarking efforts is particularly useful to partners of the Vehicle Technologies collaborative research program as it is essential in establishing reasonable yet challenging programmatic goals which facilitate development of competitive technologies. The competitive nature set forth by the Vehicle Technologies program not only promotes energy independence and economic stability, it also advocates the advancement of alternative vehicle technologies in an overall global perspective. These technologies greatly facilitate the potential to reduce dependency on depleting natural resources and mitigate harmful impacts of transportation upon the environment.

  4. Globalization and the Christian Idea of a University (or, the Lexus, the Olive Tree, and Higher Education)

    ERIC Educational Resources Information Center

    Adrian, William

    2007-01-01

    Thomas Friedman uses the Lexus and the olive tree as symbols to describe the characteristics and challenges of globalization. They can also be used to describe the issues facing the new "global" university. The Lexus is an appropriate symbol of the American university whose material success has been unrivaled and whose dominant values have…

  5. The efficiency of adjuvants combined with flupyrsulfuron-methyl plus metsulfuron-methyl (Lexus XPE) on weed control.

    PubMed

    Heremans, B; Isebaert, S; Verhoeven, R; Haesaert, G

    2007-01-01

    This paper presents the results of laboratory tests on a selection of weeds (Viola arvensis, Polygonum persicaria, Chamomilla recutita, Chenopodium album, Veronica persicaria, Alopecurus myosusroides) to investigate the efficiency of flupyrsulfuron-methyl plus metsutfuronmethyl (Lexus XPE) in combination with different adjuvants. The efficiency of the herbicide improved in combination of adjuvants. The level of phytotoxicity of the adjuvants-herbicide treatments appllied varied among the different weed species. PMID:18399424

  6. Flare Hybrids

    NASA Astrophysics Data System (ADS)

    Tomczak, M.; Dubieniecki, P.

    2015-12-01

    On the basis of the Solar Maximum Mission observations, Švestka ( Solar Phys. 121, 399, 1989) introduced a new class of flares, the so-called flare hybrids. When they start, they look like typical compact flares (phase 1), but later on, they look like flares with arcades of magnetic loops (phase 2). We summarize the characteristic features of flare hybrids in soft and hard X-rays as well as in the extreme ultraviolet; these features allow us to distinguish flare hybrids from other flares. In this article, additional energy release or long plasma cooling timescales are suggested as possible causes of phase 2. We estimate the frequency of flare hybrids, and study the magnetic configurations favorable for flare hybrid occurrence. Flare hybrids appear to be quite frequent, and the difference between the lengths of magnetic loops in the two interacting loop systems seem to be a crucial parameter for determining their characteristics.

  7. Stellarator hybrids

    SciTech Connect

    Furth, H.P.; Ludescher, C.

    1984-08-01

    The present paper briefly reviews the subject of tokamak-stellarator and pinch-stellarator hybrids, and points to two interesting new possibilities: compact-torus-stellarators and mirror-stellarators.

  8. Hybrid microelectronic technology

    NASA Astrophysics Data System (ADS)

    Moran, P.

    Various areas of hybrid microelectronic technology are discussed. The topics addressed include: basic thick film processing, thick film pastes and substrates, add-on components and attachment methods, thin film processing, and design of thick film hybrid circuits. Also considered are: packaging hybrid circuits, automating the production of hybrid circuits, application of hybrid techniques, customer's view of hybrid technology, and quality control and assurance in hybrid circuit production.

  9. Hybrid Gear

    NASA Technical Reports Server (NTRS)

    Handschuh, Robert F. (Inventor); Roberts, Gary D. (Inventor)

    2016-01-01

    A hybrid gear consisting of metallic outer rim with gear teeth and metallic hub in combination with a composite lay up between the shaft interface (hub) and gear tooth rim is described. The composite lay-up lightens the gear member while having similar torque carrying capability and it attenuates the impact loading driven noise/vibration that is typical in gear systems. The gear has the same operational capability with respect to shaft speed, torque, and temperature as an all-metallic gear as used in aerospace gear design.

  10. ) Hybrid Composite

    NASA Astrophysics Data System (ADS)

    Show, Bijay Kumar; Mondal, Dipak Kumar; Maity, Joydeep

    2014-12-01

    In this research work, the dry sliding wear behavior of 6351 Al-(4 vol.% SiC + 4 vol.% Al2O3) hybrid composite was investigated at low sliding speed (1 m/s) against a hardened EN 31 disk at different loads. In general, the wear mechanism involved adhesion (along with associated subsurface cracking and delamination) and microcutting abrasion at lower load. While at higher load, abrasive wear involving microcutting and microploughing along with adherent oxide formation was observed. The overall wear rate increased with increasing normal load. The massive particle clusters as well as individual reinforcement particles were found to stand tall to resist abrasive wear. Besides, at higher load, the generation of adherent nodular tribo-oxide through nucleation and epitaxial growth on existing Al2O3 particles lowered down the wear rate. Accordingly, at any normal load, 6351 Al-(4 vol.% SiC + 4 vol.% Al2O3) hybrid composite exhibited superior wear resistance (lower overall wear rate) than the reported wear resistance of monolithic 6351 Al alloy.

  11. Hybrid Simulator

    Energy Science and Technology Software Center (ESTSC)

    2005-10-15

    HybSim (short for Hybrid Simulator) is a flexible, easy to use screening tool that allows the user to quanti the technical and economic benefits of installing a village hybrid generating system and simulates systems with any combination of —Diesel generator sets —Photovoltaic arrays -Wind Turbines and -Battery energy storage systems Most village systems (or small population sites such as villages, remote military bases, small communities, independent or isolated buildings or centers) depend on diesel generationmore » systems for their source of energy. HybSim allows the user to determine other "sources" of energy that can greatly reduce the dollar to kilo-watt hour ratio. Supported by the DOE, Energy Storage Program, HybSim was initially developed to help analyze the benefits of energy storage systems in Alaskan villages. Soon after its development, other sources of energy were added providing the user with a greater range of analysis opportunities and providing the village with potentially added savings. In addition to village systems, HybSim has generated interest for use from military institutions in energy provisions and USAID for international village analysis.« less

  12. Hybridized tetraquarks

    NASA Astrophysics Data System (ADS)

    Esposito, A.; Pilloni, A.; Polosa, A. D.

    2016-07-01

    We propose a new interpretation of the neutral and charged X , Z exotic hadron resonances. Hybridized-tetraquarks are neither purely compact tetraquark states nor bound or loosely bound molecules but rather a manifestation of the interplay between the two. While meson molecules need a negative or zero binding energy, its counterpart for h-tetraquarks is required to be positive. The formation mechanism of this new class of hadrons is inspired by that of Feshbach metastable states in atomic physics. The recent claim of an exotic resonance in the Bs0 π± channel by the D0 Collaboration and the negative result presented subsequently by the LHCb Collaboration are understood in this scheme, together with a considerable portion of available data on X , Z particles. Considerations on a state with the same quantum numbers as the X (5568) are also made.

  13. Hybrid mimics and hybrid vigor in Arabidopsis

    PubMed Central

    Wang, Li; Greaves, Ian K.; Groszmann, Michael; Wu, Li Min; Dennis, Elizabeth S.; Peacock, W. James

    2015-01-01

    F1 hybrids can outperform their parents in yield and vegetative biomass, features of hybrid vigor that form the basis of the hybrid seed industry. The yield advantage of the F1 is lost in the F2 and subsequent generations. In Arabidopsis, from F2 plants that have a F1-like phenotype, we have by recurrent selection produced pure breeding F5/F6 lines, hybrid mimics, in which the characteristics of the F1 hybrid are stabilized. These hybrid mimic lines, like the F1 hybrid, have larger leaves than the parent plant, and the leaves have increased photosynthetic cell numbers, and in some lines, increased size of cells, suggesting an increased supply of photosynthate. A comparison of the differentially expressed genes in the F1 hybrid with those of eight hybrid mimic lines identified metabolic pathways altered in both; these pathways include down-regulation of defense response pathways and altered abiotic response pathways. F6 hybrid mimic lines are mostly homozygous at each locus in the genome and yet retain the large F1-like phenotype. Many alleles in the F6 plants, when they are homozygous, have expression levels different to the level in the parent. We consider this altered expression to be a consequence of transregulation of genes from one parent by genes from the other parent. Transregulation could also arise from epigenetic modifications in the F1. The pure breeding hybrid mimics have been valuable in probing the mechanisms of hybrid vigor and may also prove to be useful hybrid vigor equivalents in agriculture. PMID:26283378

  14. Hybrid rocket propulsion

    NASA Technical Reports Server (NTRS)

    Holzman, Allen L.

    1993-01-01

    Topics addressed are: (1) comparison of the theoretical impulses; (2) comparison of the density-specific impulses; (3) general propulsion system features comparison; (4) hybrid systems, booster applications; and (5) hybrid systems, upper stage propulsion applications.

  15. Hybridization and hybrid speciation under global change.

    PubMed

    Vallejo-Marín, Mario; Hiscock, Simon J

    2016-09-01

    Contents 1170 I. 1170 II. 1172 III. 1175 IV. 1180 V. 1183 1184 References 1184 SUMMARY: An unintended consequence of global change is an increase in opportunities for hybridization among previously isolated lineages. Here we illustrate how global change can facilitate the breakdown of reproductive barriers and the formation of hybrids, drawing on the flora of the British Isles for insight. Although global change may ameliorate some of the barriers preventing hybrid establishment, for example by providing new ecological niches for hybrids, it will have limited effects on environment-independent post-zygotic barriers. For example, genic incompatibilities and differences in chromosome numbers and structure within hybrid genomes are unlikely to be affected by global change. We thus speculate that global change will have a larger effect on eroding pre-zygotic barriers (eco-geographical isolation and phenology) than post-zygotic barriers, shifting the relative importance of these two classes of reproductive barriers from what is usually seen in naturally produced hybrids where pre-zygotic barriers are the largest contributors to reproductive isolation. Although the long-term fate of neo-hybrids is still to be determined, the massive impact of global change on the dynamics and distribution of biodiversity generates an unprecedented opportunity to study large numbers of unpredicted, and often replicated, hybridization 'experiments', allowing us to peer into the birth and death of evolutionary lineages. PMID:27214560

  16. From hybrid swarms to swarms of hybrids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The introgression of modern humans (Homo sapiens) with Neanderthals 40,000 YBP after a half-million years of separation, may have led to the best example of a hybrid swarm on earth. Modern trade and transportation in support of the human hybrids has continued to introduce additional species, genotyp...

  17. Mesoscale hybrid calibration artifact

    DOEpatents

    Tran, Hy D.; Claudet, Andre A.; Oliver, Andrew D.

    2010-09-07

    A mesoscale calibration artifact, also called a hybrid artifact, suitable for hybrid dimensional measurement and the method for make the artifact. The hybrid artifact has structural characteristics that make it suitable for dimensional measurement in both vision-based systems and touch-probe-based systems. The hybrid artifact employs the intersection of bulk-micromachined planes to fabricate edges that are sharp to the nanometer level and intersecting planes with crystal-lattice-defined angles.

  18. Homoploid hybrid expectations

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Homoploid hybrid speciation occurs when a stable, fertile, and reproductively isolated lineage results from hybridization between two distinct species without a change in ploidy level. Reproductive isolation between a homoploid hybrid species and its parents is generally attained via chromosomal re...

  19. Hybrid quantum information processing

    SciTech Connect

    Furusawa, Akira

    2014-12-04

    I will briefly explain the definition and advantage of hybrid quantum information processing, which is hybridization of qubit and continuous-variable technologies. The final goal would be realization of universal gate sets both for qubit and continuous-variable quantum information processing with the hybrid technologies. For that purpose, qubit teleportation with a continuousvariable teleporter is one of the most important ingredients.

  20. Hybrid rocket instability

    NASA Technical Reports Server (NTRS)

    Greiner, B.; Frederick, R. A., Jr.

    1993-01-01

    The paper provides a brief review of theoretical and experimental studies concerned with hybrid rocket instability. The instabilities discussed include atomization and mixing instabilities, chuffing instabilities, pressure coupled combustion instabilities, and vortex shedding. It is emphasized that the future use of hybrid motor systems as viable design alternatives will depend on a better understanding of hybrid instability.

  1. Hybrid rocket instability

    NASA Astrophysics Data System (ADS)

    Greiner, B.; Frederick, R. A., Jr.

    1993-06-01

    The paper provides a brief review of theoretical and experimental studies concerned with hybrid rocket instability. The instabilities discussed include atomization and mixing instabilities, chuffing instabilities, pressure coupled combustion instabilities, and vortex shedding. It is emphasized that the future use of hybrid motor systems as viable design alternatives will depend on a better understanding of hybrid instability.

  2. Hybrid armature projectile

    DOEpatents

    Hawke, R.S.; Asay, J.R.; Hall, C.A.; Konrad, C.H.; Sauve, G.L.; Shahinpoor, M.; Susoeff, A.R.

    1993-03-02

    A projectile for a railgun that uses a hybrid armature and provides a seed block around part of the outer surface of the projectile to seed the hybrid plasma brush. In addition, the hybrid armature is continuously vaporized to replenish plasma in a plasma armature to provide a tandem armature and provides a unique ridge and groove to reduce plasma blowby.

  3. Hybrid armature projectile

    DOEpatents

    Hawke, Ronald S.; Asay, James R.; Hall, Clint A.; Konrad, Carl H.; Sauve, Gerald L.; Shahinpoor, Mohsen; Susoeff, Allan R.

    1993-01-01

    A projectile for a railgun that uses a hybrid armature and provides a seed block around part of the outer surface of the projectile to seed the hybrid plasma brush. In addition, the hybrid armature is continuously vaporized to replenish plasma in a plasma armature to provide a tandem armature and provides a unique ridge and groove to reduce plasama blowby.

  4. Hybridization and extinction.

    PubMed

    Todesco, Marco; Pascual, Mariana A; Owens, Gregory L; Ostevik, Katherine L; Moyers, Brook T; Hübner, Sariel; Heredia, Sylvia M; Hahn, Min A; Caseys, Celine; Bock, Dan G; Rieseberg, Loren H

    2016-08-01

    Hybridization may drive rare taxa to extinction through genetic swamping, where the rare form is replaced by hybrids, or by demographic swamping, where population growth rates are reduced due to the wasteful production of maladaptive hybrids. Conversely, hybridization may rescue the viability of small, inbred populations. Understanding the factors that contribute to destructive versus constructive outcomes of hybridization is key to managing conservation concerns. Here, we survey the literature for studies of hybridization and extinction to identify the ecological, evolutionary, and genetic factors that critically affect extinction risk through hybridization. We find that while extinction risk is highly situation dependent, genetic swamping is much more frequent than demographic swamping. In addition, human involvement is associated with increased risk and high reproductive isolation with reduced risk. Although climate change is predicted to increase the risk of hybridization-induced extinction, we find little empirical support for this prediction. Similarly, theoretical and experimental studies imply that genetic rescue through hybridization may be equally or more probable than demographic swamping, but our literature survey failed to support this claim. We conclude that halting the introduction of hybridization-prone exotics and restoring mature and diverse habitats that are resistant to hybrid establishment should be management priorities. PMID:27468307

  5. Hybrid radiator cooling system

    DOEpatents

    France, David M.; Smith, David S.; Yu, Wenhua; Routbort, Jules L.

    2016-03-15

    A method and hybrid radiator-cooling apparatus for implementing enhanced radiator-cooling are provided. The hybrid radiator-cooling apparatus includes an air-side finned surface for air cooling; an elongated vertically extending surface extending outwardly from the air-side finned surface on a downstream air-side of the hybrid radiator; and a water supply for selectively providing evaporative cooling with water flow by gravity on the elongated vertically extending surface.

  6. Managing hybrid marketing systems.

    PubMed

    Moriarty, R T; Moran, U

    1990-01-01

    As competition increases and costs become critical, companies that once went to market only one way are adding new channels and using new methods - creating hybrid marketing systems. These hybrid marketing systems hold the promise of greater coverage and reduced costs. But they are also hard to manage; they inevitably raise questions of conflict and control: conflict because marketing units compete for customers; control because new indirect channels are less subject to management authority. Hard as they are to manage, however, hybrid marketing systems promise to become the dominant design, replacing the "purebred" channel strategy in all kinds of businesses. The trick to managing the hybrid is to analyze tasks and channels within and across a marketing system. A map - the hybrid grid - can help managers make sense of their hybrid system. What the chart reveals is that channels are not the basic building blocks of a marketing system; marketing tasks are. The hybrid grid forces managers to consider various combinations of channels and tasks that will optimize both cost and coverage. Managing conflict is also an important element of a successful hybrid system. Managers should first acknowledge the inevitability of conflict. Then they should move to bound it by creating guidelines that spell out which customers to serve through which methods. Finally, a marketing and sales productivity (MSP) system, consisting of a central marketing database, can act as the central nervous system of a hybrid marketing system, helping managers create customized channels and service for specific customer segments. PMID:10107959

  7. Hybridization facilitates evolutionary rescue

    PubMed Central

    Stelkens, Rike B; Brockhurst, Michael A; Hurst, Gregory D D; Greig, Duncan

    2014-01-01

    The resilience of populations to rapid environmental degradation is a major concern for biodiversity conservation. When environments deteriorate to lethal levels, species must evolve to adapt to the new conditions to avoid extinction. Here, we test the hypothesis that evolutionary rescue may be enabled by hybridization, because hybridization increases genetic variability. Using experimental evolution, we show that interspecific hybrid populations of Saccharomyces yeast adapt to grow in more highly degraded environments than intraspecific and parental crosses, resulting in survival rates far exceeding those of their ancestors. We conclude that hybridization can increase evolutionary responsiveness and that taxa able to exchange genes with distant relatives may better survive rapid environmental change. PMID:25558281

  8. From hybrid swarms to swarms of hybrids

    USGS Publications Warehouse

    Stohlgren, Thomas J.; Szalanski, Allen L; Gaskin, John F.; Young, Nicholas E.; West, Amanda; Jarnevich, Catherine S.; Tripodi, Amber

    2015-01-01

    Science has shown that the introgression or hybridization of modern humans (Homo sapiens) with Neanderthals up to 40,000 YBP may have led to the swarm of modern humans on earth. However, there is little doubt that modern trade and transportation in support of the humans has continued to introduce additional species, genotypes, and hybrids to every country on the globe. We assessed the utility of species distributions modeling of genotypes to assess the risk of current and future invaders. We evaluated 93 locations of the genus Tamarix for which genetic data were available. Maxent models of habitat suitability showed that the hybrid, T. ramosissima x T. chinensis, was slightly greater than the parent taxa (AUCs > 0.83). General linear models of Africanized honey bees, a hybrid cross of Tanzanian Apis mellifera scutellata and a variety of European honey bee including A. m. ligustica, showed that the Africanized bees (AUC = 0.81) may be displacing European honey bees (AUC > 0.76) over large areas of the southwestern U.S. More important, Maxent modeling of sub-populations (A1 and A26 mitotypes based on mDNA) could be accurately modeled (AUC > 0.9), and they responded differently to environmental drivers. This suggests that rapid evolutionary change may be underway in the Africanized bees, allowing the bees to spread into new areas and extending their total range. Protecting native species and ecosystems may benefit from risk maps of harmful invasive species, hybrids, and genotypes.

  9. Hybrid baryons [alpha].

    SciTech Connect

    Page, P. R.

    2002-01-01

    The authors review the status of hybrid baryons. The only known way to study hybrids rigorously is via excited adiabatic potentials. Hybrids can be modeled by both the bag and flux tube models. The low lying hybrid baryon is N 1/2{sup +} with a mass of 1.5 - 1.8 GeV. Hybrid baryons can be produced in the glue rich processes of diffractive {gamma}N and {pi}N production, {Psi} decays and p{bar p} annihilation. We review the current status of research on three quarks with a gluonic excitation, called a hybrid baryon. The excitation is not an orbital or radial excitation between the quarks. Hybrid baryons have also been reviewed elsewhere. The Mercedes-Benz logl in Figure 1 indicates two possible views of the confining interaction of three quarks, an essential issue in the study of hybrid baryons. In the logo the three points where the Y shape meets the boundary circle should be identified with the three quarks. There are two possibilities fo rthe interaction of the quarks: (1) a pairwise interaction of the quarks represented by the circle, or (2) a Y shaped interaction between the quarks, represented by the Y-shape in the logo.

  10. Hybrid Rocket Motor Test

    NASA Technical Reports Server (NTRS)

    1994-01-01

    A 10,000-pound thrust hybrid rocket motor is tested at Stennis Space Center's E-1 test facility. A hybrid rocket motor is a cross between a solid rocket and a liquid-fueled engine. It uses environmentally safe solid fuel and liquid oxygen.

  11. Hybrid reactors. [Fuel cycle

    SciTech Connect

    Moir, R.W.

    1980-09-09

    The rationale for hybrid fusion-fission reactors is the production of fissile fuel for fission reactors. A new class of reactor, the fission-suppressed hybrid promises unusually good safety features as well as the ability to support 25 light-water reactors of the same nuclear power rating, or even more high-conversion-ratio reactors such as the heavy-water type. One 4000-MW nuclear hybrid can produce 7200 kg of /sup 233/U per year. To obtain good economics, injector efficiency times plasma gain (eta/sub i/Q) should be greater than 2, the wall load should be greater than 1 MW.m/sup -2/, and the hybrid should cost less than 6 times the cost of a light-water reactor. Introduction rates for the fission-suppressed hybrid are usually rapid.

  12. Hybrid rocket performance

    NASA Astrophysics Data System (ADS)

    Frederick, Robert A., Jr.

    1992-12-01

    A hybrid rocket is a system consisting of a solid fuel grain and a gaseous or liquid oxidizer. Figure 1 shows three popular hybrid propulsion cycles that are under current consideration. NASA MSFC has teamed with industry to test two hybrid propulsion systems that will allow scaling to motors of potential interest for Titan and Atlas systems, as well as encompassing the range of interest for SEI lunar ascent stages and National Launch System Cargo Transfer Vehicle (NLS CTV) and NLS deorbit systems. Hybrid systems also offer advantages as moderate-cost, environmentally acceptable propulsion system. The objective of this work was to recommend a performance prediction methodology for hybrid rocket motors. The scope included completion of: a literature review, a general methodology, and a simplified performance model.

  13. Hybrid rocket performance

    NASA Technical Reports Server (NTRS)

    Frederick, Robert A., Jr.

    1992-01-01

    A hybrid rocket is a system consisting of a solid fuel grain and a gaseous or liquid oxidizer. Figure 1 shows three popular hybrid propulsion cycles that are under current consideration. NASA MSFC has teamed with industry to test two hybrid propulsion systems that will allow scaling to motors of potential interest for Titan and Atlas systems, as well as encompassing the range of interest for SEI lunar ascent stages and National Launch System Cargo Transfer Vehicle (NLS CTV) and NLS deorbit systems. Hybrid systems also offer advantages as moderate-cost, environmentally acceptable propulsion system. The objective of this work was to recommend a performance prediction methodology for hybrid rocket motors. The scope included completion of: a literature review, a general methodology, and a simplified performance model.

  14. Hybrid baryons in QCD

    SciTech Connect

    Dudek, Jozef J.; Edwards, Robert G.

    2012-03-21

    In this study, we present the first comprehensive study of hybrid baryons using lattice QCD methods. Using a large basis of composite QCD interpolating fields we extract an extensive spectrum of baryon states and isolate those of hybrid character using their relatively large overlap onto operators which sample gluonic excitations. We consider the spectrum of Nucleon and Delta states at several quark masses finding a set of positive parity hybrid baryons with quantum numbers $N_{1/2^+},\\,N_{1/2^+},\\,N_{3/2^+},\\, N_{3/2^+},\\,N_{5/2^+},\\,$ and $\\Delta_{1/2^+},\\, \\Delta_{3/2^+}$ at an energy scale above the first band of `conventional' excited positive parity baryons. This pattern of states is compatible with a color octet gluonic excitation having $J^{P}=1^{+}$ as previously reported in the hybrid meson sector and with a comparable energy scale for the excitation, suggesting a common bound-state construction for hybrid mesons and baryons.

  15. Hybrid propulsion technology program

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Technology was identified which will enable application of hybrid propulsion to manned and unmanned space launch vehicles. Two design concepts are proposed. The first is a hybrid propulsion system using the classical method of regression (classical hybrid) resulting from the flow of oxidizer across a fuel grain surface. The second system uses a self-sustaining gas generator (gas generator hybrid) to produce a fuel rich exhaust that was mixed with oxidizer in a separate combustor. Both systems offer cost and reliability improvement over the existing solid rocket booster and proposed liquid boosters. The designs were evaluated using life cycle cost and reliability. The program consisted of: (1) identification and evaluation of candidate oxidizers and fuels; (2) preliminary evaluation of booster design concepts; (3) preparation of a detailed point design including life cycle costs and reliability analyses; (4) identification of those hybrid specific technologies needing improvement; and (5) preperation of a technology acquisition plan and large scale demonstration plan.

  16. Hybrid vigour in dogs?

    PubMed

    Nicholas, Frank W; Arnott, Elizabeth R; McGreevy, Paul D

    2016-08-01

    Evidence from other species justifies the hypotheses that useful hybrid vigour occurs in dogs and that it can be exploited for improved health, welfare and fitness for purpose. Unfortunately, most of the relevant published canine studies do not provide estimates of actual hybrid vigour because of inadequate specification of the parentage of mixed-bred dogs. To our knowledge, only three published studies have shed any light on actual hybrid vigour in dogs. There are two reports of actual hybrid vigour between Labrador and Golden retrievers, the first ranging from +2.5% to -6.0% for components of a standardised applied-stimulus behavioural test, and the second being at least +12.4% for chance of graduating as a guide dog. The third study provides a minimum estimate of negative actual hybrid vigour: crossbreds between Labrador retrievers and poodles had a higher prevalence of multifocal retinal dysplasia than the average prevalence in their purebred parent breeds. The lack of estimates of actual hybrid vigour can be overcome by including the exact nature of the cross (e.g. F1, F2 or backcross) and their purebred parental breeds in the specification of mixed-bred dogs. Even if only F1 crossbreds can be categorised, this change would enable researchers to conduct substantial investigations to determine whether hybrid vigour has any utility for dog breeding. PMID:27387730

  17. Functional Hybrid Materials

    NASA Astrophysics Data System (ADS)

    Gómez-Romero, Pedro; Sanchez, Clément

    2004-04-01

    Functional Hybrid Materials consist of both organic and inorganic components, assembled for the purpose of generating desirable properties and functionalities. The aim is twofold: to bring out or enhance advantageous chemical, electrochemical, magnetic or electronic characteristics and at the same time to reduce or wholly suppress undesirable properties or effects. Another target is the creation of entirely new material behavior. The vast number of hybrid material components available has opened up a wide and diversified field of fascinating research. In this book, a team of highly renowned experts gives an in-depth overview, illustrating the superiority of well-designed hybrid materials and their potential applications.

  18. Hybrid matrix fiber composites

    DOEpatents

    Deteresa, Steven J.; Lyon, Richard E.; Groves, Scott E.

    2003-07-15

    Hybrid matrix fiber composites having enhanced compressive performance as well as enhanced stiffness, toughness and durability suitable for compression-critical applications. The methods for producing the fiber composites using matrix hybridization. The hybrid matrix fiber composites include two chemically or physically bonded matrix materials, whereas the first matrix materials are used to impregnate multi-filament fibers formed into ribbons and the second matrix material is placed around and between the fiber ribbons that are impregnated with the first matrix material and both matrix materials are cured and solidified.

  19. Artificial mismatch hybridization

    DOEpatents

    Guo, Zhen; Smith, Lloyd M.

    1998-01-01

    An improved nucleic acid hybridization process is provided which employs a modified oligonucleotide and improves the ability to discriminate a control nucleic acid target from a variant nucleic acid target containing a sequence variation. The modified probe contains at least one artificial mismatch relative to the control nucleic acid target in addition to any mismatch(es) arising from the sequence variation. The invention has direct and advantageous application to numerous existing hybridization methods, including, applications that employ, for example, the Polymerase Chain Reaction, allele-specific nucleic acid sequencing methods, and diagnostic hybridization methods.

  20. Hybrid electric vehicles TOPTEC

    SciTech Connect

    1994-06-21

    This one-day TOPTEC session began with an overview of hybrid electric vehicle technology. Updates were given on alternative types of energy storage, APU control for low emissions, simulation programs, and industry and government activities. The keynote speech was about battery technology, a key element to the success of hybrids. The TOPEC concluded with a panel discussion on the mission of hybrid electric vehicles, with a perspective from industry and government experts from United States and Canada on their view of the role of this technology.

  1. Towers of hybrid mesons

    SciTech Connect

    Semay, Claude; Buisseret, Fabien; Silvestre-Brac, Bernard

    2009-05-01

    A hybrid meson is a quark-antiquark pair in which, contrary to ordinary mesons, the gluon field is in an excited state. In the framework of constituent models, the interaction potential is assumed to be the energy of an excited string. An approximate, but accurate, analytical solution of the Schroedinger equation with such a potential is presented. When applied to hybrid charmonia and bottomonia, towers of states are predicted in which the masses are a linear function of a harmonic oscillator band number for the quark-antiquark pair. Such a formula could be a reliable guide for the experimental detection of heavy hybrid mesons.

  2. Hybrid Rocket Motor Test

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Stennis Space Center conducts a test on a hybrid rocket motor fed by a liquid oxygen turbopump. The test occurred at the E-1 test facility. The test was believed to be the first of its kind in the world.

  3. Hybrid rocket combustion study

    NASA Astrophysics Data System (ADS)

    Strand, L. D.; Ray, R. L.; Cohen, N. S.

    1993-06-01

    The objectives of this study of 'pure' or 'classic' hybrids are to (1) extend our understanding of the boundary layer combustion process and the critical engineering parameters that define this process, (2) develop an up-to-date hybrid fuel combustion model, and (3) apply the model to correlate the regression rate and scaling properties of potential fuel candidates. Tests were carried out with a hybrid slab window motor, using several diagnostic techniques, over a range of motor pressure and oxidizer mass flux conditions. The results basically confirmed turbulent boundary layer heat and mass transfer as the rate limiting process for hybrid fuel decomposition and combustion. The measured fuel regression rates showed good agreement with the analytical model predictions. The results of model scaling calculations to Shuttle SRM size conditions are presented.

  4. Hybrid adsorptive membrane reactor

    DOEpatents

    Tsotsis, Theodore T.; Sahimi, Muhammad; Fayyaz-Najafi, Babak; Harale, Aadesh; Park, Byoung-Gi; Liu, Paul K. T.

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  5. Hybrid rocket combustion study

    NASA Technical Reports Server (NTRS)

    Strand, L. D.; Ray, R. L.; Cohen, N. S.

    1993-01-01

    The objectives of this study of 'pure' or 'classic' hybrids are to (1) extend our understanding of the boundary layer combustion process and the critical engineering parameters that define this process, (2) develop an up-to-date hybrid fuel combustion model, and (3) apply the model to correlate the regression rate and scaling properties of potential fuel candidates. Tests were carried out with a hybrid slab window motor, using several diagnostic techniques, over a range of motor pressure and oxidizer mass flux conditions. The results basically confirmed turbulent boundary layer heat and mass transfer as the rate limiting process for hybrid fuel decomposition and combustion. The measured fuel regression rates showed good agreement with the analytical model predictions. The results of model scaling calculations to Shuttle SRM size conditions are presented.

  6. Hybrid adsorptive membrane reactor

    NASA Technical Reports Server (NTRS)

    Tsotsis, Theodore T. (Inventor); Sahimi, Muhammad (Inventor); Fayyaz-Najafi, Babak (Inventor); Harale, Aadesh (Inventor); Park, Byoung-Gi (Inventor); Liu, Paul K. T. (Inventor)

    2011-01-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  7. Plum and plum hybrids.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Thirty-six plum and plum hybrid cultivars are briefly described for the Fruit and Nut Register 45. This register is made to keep the plum industry and researchers up to date on the latest cultivars released....

  8. Hybrid plasmachemical reactor

    SciTech Connect

    Lelevkin, V. M. Smirnova, Yu. G.; Tokarev, A. V.

    2015-04-15

    A hybrid plasmachemical reactor on the basis of a dielectric barrier discharge in a transformer is developed. The characteristics of the reactor as functions of the dielectric barrier discharge parameters are determined.

  9. Hybrid image processing

    NASA Technical Reports Server (NTRS)

    Juday, Richard D.

    1990-01-01

    Partly-digital, partly-optical 'hybrid' image processing attempts to use the properties of each domain to synergistic advantage: while Fourier optics furnishes speed, digital processing allows the use of much greater algorithmic complexity. The video-rate image-coordinate transformation used is a critical technology for real-time hybrid image-pattern recognition. Attention is given to the separation of pose variables, image registration, and both single- and multiple-frame registration.

  10. Systems for hybrid cars

    NASA Astrophysics Data System (ADS)

    Bitsche, Otmar; Gutmann, Guenter

    Not only sharp competition but also legislation are pushing development of hybrid drive trains. Based on conventional internal combustion engine (ICE) vehicles, these drive trains offer a wide range of benefits from reduced fuel consumption and emission to multifaceted performance improvements. Hybrid electric drive trains may also facilitate the introduction of fuel cells (FC). The battery is the key component for all hybrid drive trains, as it dominates cost and performance issues. The selection of the right battery technology for the specific automotive application is an important task with an impact on costs of development and use. Safety, power, and high cycle life are a must for all hybrid applications. The greatest pressure to reduce cost is in soft hybrids, where lead-acid embedded in a considerate management presents the cheapest solution, with a considerable improvement in performance needed. From mild to full hybridization, an improvement in specific power makes higher costs more acceptable, provided that the battery's service life is equivalent to the vehicle's lifetime. Today, this is proven for the nickel-metal hydride system. Lithium ion batteries, which make use of a multiple safety concept, and with some development anticipated, provide even better prospects in terms of performance and costs. Also, their scalability permits their application in battery electric vehicles—the basis for better performance and enhanced user acceptance. Development targets for the batteries are discussed with a focus on system aspects such as electrical and thermal management and safety.

  11. Hybrid Propulsion Demonstration Program 250K Hybrid Motor

    NASA Technical Reports Server (NTRS)

    Story, George; Zoladz, Tom; Arves, Joe; Kearney, Darren; Abel, Terry; Park, O.

    2003-01-01

    The Hybrid Propulsion Demonstration Program (HPDP) program was formed to mature hybrid propulsion technology to a readiness level sufficient to enable commercialization for various space launch applications. The goal of the HPDP was to develop and test a 250,000 pound vacuum thrust hybrid booster in order to demonstrate hybrid propulsion technology and enable manufacturing of large hybrid boosters for current and future space launch vehicles. The HPDP has successfully conducted four tests of the 250,000 pound thrust hybrid rocket motor at NASA's Stennis Space Center. This paper documents the test series.

  12. Hybrid baryons in QCD

    DOE PAGESBeta

    Dudek, Jozef J.; Edwards, Robert G.

    2012-03-21

    In this study, we present the first comprehensive study of hybrid baryons using lattice QCD methods. Using a large basis of composite QCD interpolating fields we extract an extensive spectrum of baryon states and isolate those of hybrid character using their relatively large overlap onto operators which sample gluonic excitations. We consider the spectrum of Nucleon and Delta states at several quark masses finding a set of positive parity hybrid baryons with quantum numbersmore » $$N_{1/2^+},\\,N_{1/2^+},\\,N_{3/2^+},\\, N_{3/2^+},\\,N_{5/2^+},\\,$$ and $$\\Delta_{1/2^+},\\, \\Delta_{3/2^+}$$ at an energy scale above the first band of `conventional' excited positive parity baryons. This pattern of states is compatible with a color octet gluonic excitation having $$J^{P}=1^{+}$$ as previously reported in the hybrid meson sector and with a comparable energy scale for the excitation, suggesting a common bound-state construction for hybrid mesons and baryons.« less

  13. Research on Hybrid Vehicle Drivetrain

    NASA Astrophysics Data System (ADS)

    Xie, Zhongzhi

    Hybrid cars as a solution to energy saving, emission reduction measures, have received widespread attention. Motor drive system as an important part of the hybrid vehicles as an important object of study. Based on the hybrid electric vehicle powertrain control system for permanent magnet synchronous motor as the object of study. Can be applied to hybrid car compares the characteristics of traction motors, chose permanent magnet synchronous Motors as drive motors for hybrid vehicles. Building applications in hybrid cars in MATLAB/Simulink simulation model of permanent-magnet synchronous motor speed control system and analysis of simulation results.

  14. Hybridization schemes for clusters

    NASA Astrophysics Data System (ADS)

    Wales, David J.

    The concept of an optimum hybridization scheme for cluster compounds is developed with particular reference to electron counting. The prediction of electron counts for clusters and the interpretation of the bonding is shown to depend critically upon the presumed hybridization pattern of the cluster vertex atoms. This fact has not been properly appreciated in previous work, particularly in applications of Stone's tensor surface harmonic (TSH) theory, but is found to be a useful tool when dealt with directly. A quantitative definition is suggested for the optimum cluster hybridization pattern based directly upon the ease of interpretation of the molecular orbitals, and results are given for a range of species. The relationship of this scheme to the detailed cluster geometry is described using Löwdin's partitioned perturbation theory, and the success and range of application of TSH theory are discussed.

  15. Ames Hybrid Combustion Facility

    NASA Technical Reports Server (NTRS)

    Zilliac, Greg; Karabeyoglu, Mustafa A.; Cantwell, Brian; Hunt, Rusty; DeZilwa, Shane; Shoffstall, Mike; Soderman, Paul T.; Bencze, Daniel P. (Technical Monitor)

    2003-01-01

    The report summarizes the design, fabrication, safety features, environmental impact, and operation of the Ames Hybrid-Fuel Combustion Facility (HCF). The facility is used in conducting research into the scalability and combustion processes of advanced paraffin-based hybrid fuels for the purpose of assessing their applicability to practical rocket systems. The facility was designed to deliver gaseous oxygen at rates between 0.5 and 16.0 kg/sec to a combustion chamber operating at pressures ranging from 300 to 900. The required run times were of the order of 10 to 20 sec. The facility proved to be robust and reliable and has been used to generate a database of regression-rate measurements of paraffin at oxygen mass flux levels comparable to those of moderate-sized hybrid rocket motors.

  16. Hybridization in geese: a review.

    PubMed

    Ottenburghs, Jente; van Hooft, Pim; van Wieren, Sipke E; Ydenberg, Ronald C; Prins, Herbert H T

    2016-01-01

    The high incidence of hybridization in waterfowl (ducks, geese and swans) makes this bird group an excellent study system to answer questions related to the evolution and maintenance of species boundaries. However, knowledge on waterfowl hybridization is biased towards ducks, with a large knowledge gap in geese. In this review, we assemble the available information on hybrid geese by focusing on three main themes: (1) incidence and frequency, (2) behavioural mechanisms leading to hybridization, and (3) hybrid fertility. Hybridization in geese is common on a species-level, but rare on a per-individual level. An overview of the different behavioural mechanisms indicates that forced extra-pair copulations and interspecific nest parasisitm can both lead to hybridization. Other sources of hybrids include hybridization in captivity and vagrant geese, which may both lead to a scarcity of conspecifics. The different mechanisms are not mutually exclusive and it is currently not possible to discriminate between the different mechanisms without quantitative data. Most hybrid geese are fertile; only in crosses between distantly related species do female hybrids become sterile. This fertility pattern, which is in line with Haldane's Rule, may facilitate interspecific gene flow between closely related species. The knowledge on hybrid geese should be used, in combination with the information available on hybridization in ducks, to study the process of avian speciation. PMID:27182276

  17. Smart hybrid rotary damper

    NASA Astrophysics Data System (ADS)

    Yang, C. S. Walter; DesRoches, Reginald

    2014-03-01

    This paper develops a smart hybrid rotary damper using a re-centering smart shape memory alloy (SMA) material as well as conventional energy-dissipating metallic plates that are easy to be replaced. The ends of the SMA and steel plates are inserted in the hinge. When the damper rotates, all the plates bend, providing energy dissipating and recentering characteristics. Such smart hybrid rotary dampers can be installed in structures to mitigate structural responses and to re-center automatically. The damaged energy-dissipating plates can be easily replaced promptly after an external excitation, reducing repair time and costs. An OpenSEES model of a smart hybrid rotary was established and calibrated to reproduce the realistic behavior measured from a full-scale experimental test. Furthermore, the seismic performance of a 3-story moment resisting model building with smart hybrid rotary dampers designed for downtown Los Angeles was also evaluated in the OpenSEES structural analysis software. Such a smart moment resisting frame exhibits perfect residual roof displacement, 0.006", extremely smaller than 18.04" for the conventional moment resisting frame subjected to a 2500 year return period ground motion for the downtown LA area (an amplified factor of 1.15 on Kobe earthquake). The smart hybrid rotary dampers are also applied into an eccentric braced steel frame, which combines a moment frame system and a bracing system. The results illustrate that adding smart hybrid rotaries in this braced system not only completely restores the building after an external excitation, but also significantly reduces peak interstory drifts.

  18. Hybrid nonlocality distillation

    NASA Astrophysics Data System (ADS)

    Wu, Keng-Shuo; Hsu, Li-Yi

    2013-08-01

    In this Letter, we introduce the notion of hybrid nonlocality distillation, in which different nonlocal boxes are exploited for nonlocality distillation. Here, we quantify the nonlocality using the violation degree of either the Clauser-Horne-Shimony-Holt inequality or the I3322 inequality. Our study shows that hybrid nonlocality distillation can outperform nonlocality distillation using copies of single nonlocal boxes. In particular, more nonlocality of undistillable boxes can be activated with the assistance of distillable boxes. Equivalently, distillable boxes can achieve more nonlocality with the assistance of undistillable boxes.

  19. Diagnostics for hybrid reactors

    NASA Astrophysics Data System (ADS)

    Orsitto, Francesco Paolo

    2012-06-01

    The Hybrid Reactor(HR) can be considered an attractive actinide-burner or a fusion assisted transmutation for destruction of transuranic(TRU) nuclear waste. The hybrid reactor has two important subsystems: the tokamak neutron source and the blanket which includes a fuel zone where the TRU are placed and a tritium breeding zone. The diagnostic system for a HR must be as simple and robust as possible to monitor and control the plasma scenario, guarantee the protection of the machine and monitor the transmutation.

  20. Hybridized polymer matrix composite

    NASA Technical Reports Server (NTRS)

    Stern, B. A.; Visser, T.

    1981-01-01

    Under certain conditions of combined fire and impact, graphite fibers are released to the atmosphere by graphite fiber composites. The retention of graphite fibers in these situations is investigated. Hybrid combinations of graphite tape and cloth, glass cloth, and resin additives are studied with resin systems. Polyimide resins form the most resistant composites and resins based on simple novolac epoxies the least resistant of those tested. Great improvement in the containment of the fibers is obtained in using graphite/glass hybrids, and nearly complete prevention of individual fiber release is made possible by the use of resin additives.

  1. Diagnostics for hybrid reactors

    SciTech Connect

    Orsitto, Francesco Paolo

    2012-06-19

    The Hybrid Reactor(HR) can be considered an attractive actinide-burner or a fusion assisted transmutation for destruction of transuranic(TRU) nuclear waste. The hybrid reactor has two important subsystems: the tokamak neutron source and the blanket which includes a fuel zone where the TRU are placed and a tritium breeding zone. The diagnostic system for a HR must be as simple and robust as possible to monitor and control the plasma scenario, guarantee the protection of the machine and monitor the transmutation.

  2. Hybrid network intrusion detection

    NASA Astrophysics Data System (ADS)

    Tahmoush, David

    2014-05-01

    We report on a machine learning classifier that can be used to discover the patterns hidden within large networking data flows. It utilizes an existing intrusion detection system (IDS) as an oracle to learn a faster, less resource intensive normalcy classifier as a front-end to a hybrid network IDS. This system has the capability to recognize new attacks that are similar to known attack signatures. It is also more highly scalable and distributable than the signature-based IDS. The new hybrid design also allows distributed updates and retraining of the normalcy classifier to stay up-to-date with current threats.

  3. A Mathematical Approach to Hybridization

    ERIC Educational Resources Information Center

    Matthews, P. S. C.; Thompson, J. J.

    1975-01-01

    Presents an approach to hybridization which exploits the similarities between the algebra of wave functions and vectors. This method will account satisfactorily for the number of orbitals formed when applied to hybrids involving the s and p orbitals. (GS)

  4. Hybrid polarization control

    NASA Astrophysics Data System (ADS)

    Gray, George R.; Ibragimov, Edem; Sluz, Joseph; Sova, Raymond

    2005-05-01

    We demonstrate a novel method of polarization control that combines rotatable waveplates (angle control) and variable retarders (retardance control). Such a "hybrid" polarization controller performs far better than conventional controllers, allowing nearly perfect arbitrary-to-arbitrary polarization transformations. We show theoretically that the two control parameters augment one another because they tend to result in orthogonal movements on the Poincaré sphere.

  5. Nuclear hybrid energy infrastructure

    SciTech Connect

    Agarwal, Vivek; Tawfik, Magdy S.

    2015-02-01

    The nuclear hybrid energy concept is becoming a reality for the US energy infrastructure where combinations of the various potential energy sources (nuclear, wind, solar, biomass, and so on) are integrated in a hybrid energy system. This paper focuses on challenges facing a hybrid system with a Small Modular Reactor at its core. The core of the paper will discuss efforts required to develop supervisory control center that collects data, supports decision-making, and serves as an information hub for supervisory control center. Such a center will also be a model for integrating future technologies and controls. In addition, advanced operations research, thermal cycle analysis, energy conversion analysis, control engineering, and human factors engineering will be part of the supervisory control center. Nuclear hybrid energy infrastructure would allow operators to optimize the cost of energy production by providing appropriate means of integrating different energy sources. The data needs to be stored, processed, analyzed, trended, and projected at right time to right operator to integrate different energy sources.

  6. Rethinking Resources and Hybridity

    ERIC Educational Resources Information Center

    Gonsalves, Allison J.; Seiler, Gale; Salter, Dana E.

    2011-01-01

    This review explores Alfred Schademan's "What does playing cards have to do with science? A resource-rich view of African American young men" by examining how he uses two key concepts--hybridity and resources--to propose an approach to science education that counters enduring deficit notions associated with this population. Our response to…

  7. Hybrid Imaging in Oncology.

    PubMed

    Fatima, Nosheen; Zaman, Maseeh uz; Gnanasegaran, Gopinath; Zaman, Unaiza; Shahid, Wajeeha; Zaman, Areeba; Tahseen, Rabia

    2015-01-01

    In oncology various imaging modalities play a crucial role in diagnosis, staging, restaging, treatment monitoring and follow up of various cancers. Stand-alone morphological imaging like computerized tomography (CT) and magnetic resonance imaging (MRI) provide a high magnitude of anatomical details about the tumor but are relatively dumb about tumor physiology. Stand-alone functional imaging like positron emission tomography (PET) and single photon emission tomography (SPECT) are rich in functional information but provide little insight into tumor morphology. Introduction of first hybrid modality PET/CT is the one of the most successful stories of current century which has revolutionized patient care in oncology due to its high diagnostic accuracy. Spurred on by this success, more hybrid imaging modalities like SPECT/CT and PET/MR were introduced. It is the time to explore the potential applications of the existing hybrid modalities, developing and implementing standardized imaging protocols and train users in nuclear medicine and radiology. In this review we discuss three existing hybrid modalities with emphasis on their technical aspects and clinical applications in oncology. PMID:26320423

  8. Improved hybrid rocket fuel

    NASA Technical Reports Server (NTRS)

    Dean, David L.

    1995-01-01

    McDonnell Douglas Aerospace, as part of its Independent R&D, has initiated development of a clean burning, high performance hybrid fuel for consideration as an alternative to the solid rocket thrust augmentation currently utilized by American space launch systems including Atlas, Delta, Pegasus, Space Shuttle, and Titan. It could also be used in single stage to orbit or as the only propulsion system in a new launch vehicle. Compared to solid propellants based on aluminum and ammonium perchlorate, this fuel is more environmentally benign in that it totally eliminates hydrogen chloride and aluminum oxide by products, producing only water, hydrogen, nitrogen, carbon oxides, and trace amounts of nitrogen oxides. Compared to other hybrid fuel formulations under development, this fuel is cheaper, denser, and faster burning. The specific impulse of this fuel is comparable to other hybrid fuels and is between that of solids and liquids. The fuel also requires less oxygen than similar hybrid fuels to produce maximum specific impulse, thus reducing oxygen delivery system requirements.

  9. HYBRID RECEPTOR MODELS

    EPA Science Inventory

    A hybrid receptor model is a specified mathematical procedure which uses not only the ambient species concentration measurements that form the input data for a pure receptor model, but in addition source emission rates or atmospheric dispersion or transformation information chara...

  10. Hybridized polymer matrix composites

    NASA Technical Reports Server (NTRS)

    House, E. E.; Hoggatt, J. T.; Symonds, W. A.

    1980-01-01

    The extent to which graphite fibers are released from resin matrix composites that are exposed to fire and impact conditions was determined. Laboratory simulations of those conditions that could exist in the event of an aircraft crash and burn situation were evaluated. The effectiveness of various hybridizing concepts in preventing this release of graphite fibers were also evaluated. The baseline (i.e., unhybridized) laminates examined were prepared from commercially available graphite/epoxy, graphite/polyimide, and graphite/phenolic materials. Hybridizing concepts investigated included resin fillers, laminate coatings, resin blending, and mechanical interlocking of the graphite reinforcement. The baseline and hybridized laminates' mechanical properties, before and after isothermal and humidity aging, were also compared. It was found that a small amount of graphite fiber was released from the graphite/epoxy laminates during the burn and impact conditions used in this program. However, the extent to which the fibers were released is not considered a severe enough problem to preclude the use of graphite reinforced composites in civil aircraft structure. It also was found that several hybrid concepts eliminated this fiber release. Isothermal and humidity aging did not appear to alter the fiber release tendencies.

  11. Hybrid Anisotropic Micromesh

    NASA Astrophysics Data System (ADS)

    Gutzov, S.; Danchova, N.; Tsekov, R.; Barreno, I.; Ruiz del Portal, X.; Ulbikas, J.

    2015-10-01

    A new hybrid woven micromesh containing metal and polyester wires with a 2D porosity of about 30% has been created. The anisotropic microcomposite is developed as a new material with wide applications in thermal and electrical engineering. The mesh material is carefully characterized using electron microscopy, fluorescence microscopy, chemical analysis, thermal conductivity measurements and differential scanning calorimetry.

  12. Electric and hybrid vehicles

    NASA Technical Reports Server (NTRS)

    1979-01-01

    Report characterizes state-of-the-art electric and hybrid (combined electric and heat engine) vehicles. Performance data for representative number of these vehicles were obtained from track and dynamometer tests. User experience information was obtained from fleet operators and individual owners of electric vehicles. Data on performance and physical characteristics of large number of vehicles were obtained from manufacturers and available literature.

  13. Hybridization of biomedical circuitry

    NASA Technical Reports Server (NTRS)

    Rinard, G. A.

    1978-01-01

    The design and fabrication of low power hybrid circuits to perform vital signs monitoring are reported. The circuits consist of: (1) clock; (2) ECG amplifier and cardiotachometer signal conditioner; (3) impedance pneumobraph and respiration rate processor; (4) hear/breath rate processor; (5) temperature monitor; and (6) LCD display.

  14. Hybrid Solar GHP Simulator

    Energy Science and Technology Software Center (ESTSC)

    2012-12-11

    This project provides an easy-to-use, menu-driven, software tool for designing hybrid solar-geothermal heat pump systems (GHP) for both heating- and cooling-dominated buildings. No such design tool currently exists. In heating-dominated buildings, the design approach takes advantage of glazed solar collectors to effectively balance the annual thermal loads on the ground with renewable solar energy. In cooling-dominated climates, the design approach takes advantage of relatively low-cost, unglazed solar collectors as the heat rejecting component. The primarymore » benefit of hybrid GHPs is the reduced initial cost of the ground heat exchanger (GHX). Furthermore, solar thermal collectors can be used to balance the ground loads over the annual cycle, thus making the GHX fully sustainable; in heating-dominated buildings, the hybrid energy source (i.e., solar) is renewable, in contrast to a typical fossil fuel boiler or electric resistance as the hybrid component; in cooling-dominated buildings, use of unglazed solar collectors as a heat rejecter allows for passive heat rejection, in contrast to a cooling tower that consumes a significant amount of energy to operate, and hybrid GHPs can expand the market by allowing reduced GHX footprint in both heating- and cooling-dominated climates. The design tool allows for the straight-forward design of innovative GHP systems that currently pose a significant design challenge. The project lays the foundations for proper and reliable design of hybrid GHP systems, overcoming a series of difficult and cumbersome steps without the use of a system simulation approach, and without an automated optimization scheme. As new technologies and design concepts emerge, sophisticated design tools and methodologies must accompany them and be made usable for practitioners. Lack of reliable design tools results in reluctance of practitioners to implement more complex systems. A menu-driven software tool for the design of hybrid solar GHP systems

  15. Hybridization and introgression in two ecologically dissimilar Fundulus hybrid zones.

    PubMed

    Schaefer, Jacob; Duvernell, David; Campbell, Dave Cooper

    2016-05-01

    Hybridization and introgression appear more common in rapidly evolving groups, suggesting an important role in the evolutionary process. Detailed studies of how extrinsic or intrinsic forces regulate hybridization and introgression have the potential for broadening our understanding of mechanisms generating diversity. Species in the Fundulus notatus species complex have broad overlapping ranges and occur in replicated hybrid zones along predictable stream gradients. Typical hybrid zone structure has Fundulus olivaceus in headwaters, F. notatus downstream, and hybrid zones near confluences or abrupt shifts in habitat. Rarely, the typical upstream-downstream orientation is reversed raising questions as to how hybrid zones are formed and maintained. We used next-generation sequencing data to study hybridization and introgression in hybrid zones in neighboring drainages that differ in orientation (typical and reversed). We predicted extrinsic forces linked to stream gradients would result in noticeable differences between the two. Contrary to predictions, the data indicate the hybrid zones are remarkably similar. We used individual-based simulations to explore the potential role of intrinsic and extrinsic forces in generating and maintaining typical and reversed hybrid zones. Simulation results were consistent with reversed hybrid zones being formed from stochastic processes combined with strong intrinsic forces and weak extrinsic forces. PMID:27062071

  16. Hybrid Interventions in Limb Salvage

    PubMed Central

    Huynh, Tam T.T.; Bechara, Carlos F.

    2013-01-01

    Hybrid interventions have become an integral part of our strategy for limb salvage in patients with multilevel arterial occlusive disease. In this article, we describe the commonly used hybrid interventions and review their indications and outcomes. Iliac stenting and femoral endarterectomy are the two most frequently performed procedures in hybrid cases. Short- and long-term outcomes of hybrid interventions are at least comparable to conventional endovascular and surgical revascularization procedures. Hybrid revascularization offers the efficiency and convenience of a single-stage revascularization. PMID:23805341

  17. Rethinking resources and hybridity

    NASA Astrophysics Data System (ADS)

    Gonsalves, Allison J.; Seiler, Gale; Salter, Dana E.

    2011-06-01

    This review explores Alfred Schademan's "What does playing cards have to do with science? A resource-rich view of African American young men" by examining how he uses two key concepts—hybridity and resources—to propose an approach to science education that counters enduring deficit notions associated with this population. Our response to Schademan's work expands upon his definition of hybridity and its purpose in the science classroom and highlights the tensions inherent in the appropriation of student resources in classroom spaces. This conversation points also to the need for research analyses and pedagogical approaches that simultaneously valorize student resources, allow student opportunities to learn the dominant codes, and provide teacher and student opportunities to transform them. Carol Lee's notion of "cultural modeling" is discussed as a possible framing device to facilitate this kind of research.

  18. Pulsed hybrid field emitter

    DOEpatents

    Sampayan, Stephen E.

    1998-01-01

    A hybrid emitter exploits the electric field created by a rapidly depoled ferroelectric material. Combining the emission properties of a planar thin film diamond emitter with a ferroelectric alleviates the present technological problems associated with both types of emitters and provides a robust, extremely long life, high current density cathode of the type required by emerging microwave power generation, accelerator technology and display applications. This new hybrid emitter is easy to fabricate and not susceptible to the same failures which plague microstructure field emitter technology. Local electrode geometries and electric field are determined independently from those for optimum transport and brightness preservation. Due to the large amount of surface charge created on the ferroelectric, the emitted electrons have significant energy, thus eliminating the requirement for specialized phosphors in emissive flat-panel displays.

  19. Pulsed hybrid field emitter

    DOEpatents

    Sampayan, S.E.

    1998-03-03

    A hybrid emitter exploits the electric field created by a rapidly depoled ferroelectric material. Combining the emission properties of a planar thin film diamond emitter with a ferroelectric alleviates the present technological problems associated with both types of emitters and provides a robust, extremely long life, high current density cathode of the type required by emerging microwave power generation, accelerator technology and display applications. This new hybrid emitter is easy to fabricate and not susceptible to the same failures which plague microstructure field emitter technology. Local electrode geometries and electric field are determined independently from those for optimum transport and brightness preservation. Due to the large amount of surface charge created on the ferroelectric, the emitted electrons have significant energy, thus eliminating the requirement for specialized phosphors in emissive flat-panel displays. 11 figs.

  20. Hybridized polymer matrix composites

    NASA Technical Reports Server (NTRS)

    London, A.

    1981-01-01

    Design approaches and materials are described from which are fabricated pyrostatic graphite/epoxy (Gr/Ep) laminates that show improved retention of graphite particulates when subjected to burning. Sixteen hybridized plus two standard Gr/Ep laminates were designed, fabricated, and tested in an effort to eliminate the release of carbon (graphite) fiber particles from burned/burning, mechanically disturbed samples. The term pyrostatic is defined as meaning mechanically intact in the presence of fire. Graphite particulate retentive laminates were constructed whose constituent materials, cost of fabrication, and physical and mechanical properties were not significantly different from existing Gr/Ep composites. All but one laminate (a Celion graphite/bis-maleimide polyimide) were based on an off-the-shelf Gr/Ep, the AS-1/3501-5A system. Of the 16 candidates studied, four thin (10-ply) and four thick (50-ply) hybridized composites are recommended.

  1. Hybrid plasma modeling.

    SciTech Connect

    Hopkins, Matthew Morgan; DeChant, Lawrence Justin.; Piekos, Edward Stanley; Pointon, Timothy David

    2009-02-01

    This report summarizes the work completed during FY2007 and FY2008 for the LDRD project ''Hybrid Plasma Modeling''. The goal of this project was to develop hybrid methods to model plasmas across the non-continuum-to-continuum collisionality spectrum. The primary methodology to span these regimes was to couple a kinetic method (e.g., Particle-In-Cell) in the non-continuum regions to a continuum PDE-based method (e.g., finite differences) in continuum regions. The interface between the two would be adjusted dynamically ased on statistical sampling of the kinetic results. Although originally a three-year project, it became clear during the second year (FY2008) that there were not sufficient resources to complete the project and it was terminated mid-year.

  2. Hybrid superconducting magnetic suspensions

    SciTech Connect

    Tixador, P.; Hiebel, P.; Brunet, Y.

    1996-07-01

    Superconductors, especially high T{sub c} ones, are the most attractive materials to design stable and fully passive magnetic suspensions which have to control five degrees of freedom. The hybrid superconducting magnetic suspensions present high performances and a simple cooling mode. They consist of a permanent magnet bearing, stabilized by a suitable magnet-superconductor structure. Several designs are given and compared in terms of forces and stiffnesses. The design of the magnet bearing plays an important part. The superconducting magnetic bearing participates less in levitation but must provide a high stabilizing stiffness. This is achieved by the magnet configuration, a good material in term of critical current density and field cooling. A hybrid superconducting suspension for a flywheel is presented. This system consists of a magnet thrust bearing stabilized by superconductors interacting with an alternating polarity magnet structure. First tests and results are reported. Superconducting materials are magnetically melt-textured YBaCuO.

  3. Sneutrino Hybrid Inflation

    SciTech Connect

    Antusch, Stefan

    2006-11-28

    We review the scenario of sneutrino hybrid inflation, where one of the singlet sneutrinos, the superpartners of the right-handed neutrinos, plays the role of the inflaton. In a minimal model of sneutrino hybrid inflation, the spectral index is given by ns {approx_equal} 1 + 2{gamma}. With {gamma} = 0.025 {+-} 0.01 constrained by WMAP, a running spectral index vertical bar dns/dlnk vertical bar << vertical bar{gamma}vertical bnd a tensor-to-scalar ratio r << {gamma}2 are predicted. Small neutrino masses arise from the seesaw mechanism, with heavy masses for the singlet (s)neutrinos generated by the vacuum expectation value of the waterfall field after inflation. The baryon asymmetry of the universe can be explained by non-thermal leptogenesis via sneutrino inflaton decay, with low reheat temperature TRH {approx_equal} 106 GeV.

  4. Hybrid Neurofibroma-Schwannoma.

    PubMed

    Hussain, Namath S; Specht, Charles S; Frauenhoffer, Elizabeth; Glantz, Michael; Harbaugh, Kimberly

    2016-01-01

    Neurofibromas and schwannomas are common lesions that may be idiopathic or may occur in association with neural crest genetic syndromes such as neurofibromatosis type 1, neurofibromatosis type 2, and schwannomatosis. A hybrid tumor that contains pathological characteristics of both neurofibroma and schwannoma has been described as a rare entity. We present the clinical, radiographic, and pathological findings of such a case. PMID:27158577

  5. Hybrid undulator numerical optimization

    SciTech Connect

    Hairetdinov, A.H.; Zukov, A.A.

    1995-12-31

    3D properties of the hybrid undulator scheme arc studied numerically using PANDIRA code. It is shown that there exist two well defined sets of undulator parameters which provide either maximum on-axis field amplitude or minimal higher harmonics amplitude of the basic undulator field. Thus the alternative between higher field amplitude or pure sinusoidal field exists. The behavior of the undulator field amplitude and harmonics structure for a large set of (undulator gap)/(undulator wavelength) values is demonstrated.

  6. Fibonacci-Pell Hybridities

    ERIC Educational Resources Information Center

    Koshy, Thomas; Gao, Zhenguang

    2012-01-01

    We develop a recurrence satisfied by the Fibonacci and Pell families. We then use it to find explicit formulae and generating functions for the hybrids "F[subscript n]P[subscript n]", "L[subscript n]P[subscript n]", "F[subscript n]Q[subscript n]" and "L[subscript n]Q[subscript n]", where "F[subscript n]", "L[subscript n]", "P[subscript n]" and…

  7. Hybrid electroluminescent devices

    DOEpatents

    Shiang, Joseph John; Duggal, Anil Raj; Michael, Joseph Darryl

    2010-08-03

    A hybrid electroluminescent (EL) device comprises at least one inorganic diode element and at least one organic EL element that are electrically connected in series. The absolute value of the breakdown voltage of the inorganic diode element is greater than the absolute value of the maximum reverse bias voltage across the series. The inorganic diode element can be a power diode, a Schottky barrier diode, or a light-emitting diode.

  8. Cold Hybrid Star Properties

    SciTech Connect

    Moshfegh, H. R.; Darehmoradi, M.; Mojarrad, M. Ghazanfari

    2011-10-28

    Properties of neutron stars with quark core are investigated. The equation of state of hadronic matter is calculated using Myers and Swiatecki two nucleon interaction within Thomas-Fermi semiclassical approximation (TF). For quark matter we employ The MIT bag model with constant and density dependent bag parameter. With use of the obtained equation of states we have calculated mass-radius relation of such hybrid stars.

  9. Hybrid knowledge systems

    NASA Technical Reports Server (NTRS)

    Subrahmanian, V. S.

    1994-01-01

    An architecture called hybrid knowledge system (HKS) is described that can be used to interoperate between a specification of the control laws describing a physical system, a collection of databases, knowledge bases and/or other data structures reflecting information about the world in which the physical system controlled resides, observations (e.g. sensor information) from the external world, and actions that must be taken in response to external observations.

  10. Hybrid Neurofibroma-Schwannoma

    PubMed Central

    Specht, Charles S; Frauenhoffer, Elizabeth; Glantz, Michael; Harbaugh, Kimberly

    2016-01-01

    Neurofibromas and schwannomas are common lesions that may be idiopathic or may occur in association with neural crest genetic syndromes such as neurofibromatosis type 1, neurofibromatosis type 2, and schwannomatosis. A hybrid tumor that contains pathological characteristics of both neurofibroma and schwannoma has been described as a rare entity. We present the clinical, radiographic, and pathological findings of such a case. PMID:27158577

  11. Printed hybrid systems

    NASA Astrophysics Data System (ADS)

    Karioja, Pentti; Mäkinen, Jukka-Tapani; Keränen, Kimmo; Aikio, Janne; Alajoki, Teemu; Jaakola, Tuomo; Koponen, Matti; Keränen, Antti; Heikkinen, Mikko; Tuomikoski, Markus; Suhonen, Riikka; Hakalahti, Leena; Kopola, Pälvi; Hast, Jukka; Liedert, Ralf; Hiltunen, Jussi; Masuda, Noriyuki; Kemppainen, Antti; Rönkä, Kari; Korhonen, Raimo

    2012-04-01

    This paper presents research activities carried out at VTT Technical Research Centre of Finland in the field of hybrid integration of optics, electronics and mechanics. Main focus area in our research is the manufacturing of electronic modules and product structures with printed electronics, film-over-molding and polymer sheet lamination technologies and the goal is in the next generation of smart systems utilizing monolithic polymer packages. The combination of manufacturing technologies such as roll-to-roll -printing, injection molding and traditional component assembly is called Printed Hybrid Systems (PHS). Several demonstrator structures have been made, which show the potential of polymer packaging technology. One demonstrator example is a laminated structure with embedded LED chips. Element thickness is only 0.3mm and the flexible stack of foils can be bent in two directions after assembly process and was shaped curved using heat and pressure. The combination of printed flexible circuit boards and injection molding has also been demonstrated with several functional modules. The demonstrators illustrate the potential of origami electronics, which can be cut and folded to 3D shapes. It shows that several manufacturing process steps can be eliminated by Printed Hybrid Systems technology. The main benefits of this combination are small size, ruggedness and conformality. The devices are ideally suited for medical applications as the sensitive electronic components are well protected inside the plastic and the structures can be cleaned easily due to the fact that they have no joints or seams that can accumulate dirt or bacteria.

  12. Asymmetric Hybrid Nanoparticles

    SciTech Connect

    Chumanov, George

    2015-11-05

    Hybrid Nanoparticles (AHNs) are rationally-designed multifunctional nanostructures and novel building blocks for the next generation of advanced materials and devices. Nanoscale materials attract considerable interest because of their unusual properties and potential for practical applications. Most of the activity in this field is focused on the synthesis of homogeneous nanoparticles from metals, metal oxides, semiconductors, and polymers. It is well recognized that properties of nanoparticles can be further enhanced if they are made as hybrid structures. This program is concerned with the synthesis, characterization, and application of such hybrid structures termed AHNs. AHNs are composed of a homogeneous core and several caps of different materials deposited on its surface (Fig. 1). Combined properties of the core and the caps as well as new properties that arise from core-cap and cap-cap interactions render AHNs multifunctional. In addition, specific chemical reactivity of the caps enables directional self-assembly of AHNs into complex architectures that are not possible with only spherical nanoparticles.

  13. Hybrid Propulsion Technology Program

    NASA Technical Reports Server (NTRS)

    Jensen, G. E.; Holzman, A. L.

    1990-01-01

    Future launch systems of the United States will require improvements in booster safety, reliability, and cost. In order to increase payload capabilities, performance improvements are also desirable. The hybrid rocket motor (HRM) offers the potential for improvements in all of these areas. The designs are presented for two sizes of hybrid boosters, a large 4.57 m (180 in.) diameter booster duplicating the Advanced Solid Rocket Motor (ASRM) vacuum thrust-time profile and smaller 2.44 m (96 in.), one-quater thrust level booster. The large booster would be used in tandem, while eight small boosters would be used to achieve the same total thrust. These preliminary designs were generated as part of the NASA Hybrid Propulsion Technology Program. This program is the first phase of an eventual three-phaes program culminating in the demonstration of a large subscale engine. The initial trade and sizing studies resulted in preferred motor diameters, operating pressures, nozzle geometry, and fuel grain systems for both the large and small boosters. The data were then used for specific performance predictions in terms of payload and the definition and selection of the requirements for the major components: the oxidizer feed system, nozzle, and thrust vector system. All of the parametric studies were performed using realistic fuel regression models based upon specific experimental data.

  14. Hybrid X-pinches

    SciTech Connect

    Shelkovenko, T. A.; Pikuz, S. A.; Mishin, S. A.; Mingaleev, A. R.; Tilikin, I. N.; Knapp, P. F.; Cahill, A. D.; Hoyt, C. L.; Hammer, D. A.

    2012-05-15

    Results from experimental studies of a hybrid X-pinch with an initial configuration in the form of a high-current diode with conical tungsten electrodes spaced by 1-2 mm and connected to one another with 20- to 100-{mu}m-diameter wires are presented. The experiments were carried out at four facilities with a current amplitude from 200 to 1000 kA and front duration from 45 to 200 ns. It is shown that, in spite of their simpler configuration, hybrid X-pinches with a short rise time of the current pulse (50-100 ns) are highly competitive with standard X-pinches in the generated soft X-ray power and the formation of a single hot spot in them is much more stable, while hard X-ray emission is almost absent. The possibility of using hybrid X-pinches as soft X-ray sources for point projection X-ray imaging of plasma objects is considered.

  15. Hybrid2 - The hybrid power system simulation model

    SciTech Connect

    Baring-Gould, E.I.; Green, H.J.; Dijk, V.A.P. van; Manwell, J.F.

    1996-12-31

    There is a large-scale need and desire for energy in remote communities, especially in the developing world; however the lack of a user friendly, flexible performance prediction model for hybrid power systems incorporating renewables hindered the analysis of hybrids as options to conventional solutions. A user friendly model was needed with the versatility to simulate the many system locations, widely varying hardware configurations, and differing control options for potential hybrid power systems. To meet these ends, researchers from the National Renewable Energy Laboratory (NREL) and the University of Massachusetts (UMass) developed the Hybrid2 software. This paper provides an overview of the capabilities, features, and functionality of the Hybrid2 code, discusses its validation and future plans. Model availability and technical support provided to Hybrid2 users are also discussed. 12 refs., 3 figs., 4 tabs.

  16. Solar thermal electric hybridization issues

    SciTech Connect

    Williams, T A; Bohn, M S; Price, H W

    1994-10-01

    Solar thermal electric systems have an advantage over many other renewable energy technologies because the former use heat as an intermediate energy carrier. This is an advantage as it allows for a relatively simple method of hybridization by using heat from fossil-fuel. Hybridization of solar thermal electric systems is a topic that has recently generated significant interest and controversy and has led to many diverse opinions. This paper discusses many of the issues associated with hybridization of solar thermal electric systems such as what role hybridization should play; how it should be implemented; what are the efficiency, environmental, and cost implications; what solar fraction is appropriate; how hybrid systems compete with solar-only systems; and how hybridization can impact commercialization efforts for solar thermal electric systems.

  17. Hybrid solar lighting systems and components

    DOEpatents

    Muhs, Jeffrey D.; Earl, Dennis D.; Beshears, David L.; Maxey, Lonnie C.; Jordan, John K.; Lind, Randall F.

    2007-06-12

    A hybrid solar lighting system and components having at least one hybrid solar concentrator, at least one fiber receiver, at least one hybrid luminaire, and a light distribution system operably connected to each hybrid solar concentrator and each hybrid luminaire. A controller operates each component.

  18. Hybrid solar lighting distribution systems and components

    DOEpatents

    Muhs, Jeffrey D.; Earl, Dennis D.; Beshears, David L.; Maxey, Lonnie C.; Jordan, John K.; Lind, Randall F.

    2011-07-05

    A hybrid solar lighting distribution system and components having at least one hybrid solar concentrator, at least one fiber receiver, at least one hybrid luminaire, and a light distribution system operably connected to each hybrid solar concentrator and each hybrid luminaire. A controller operates all components.

  19. Global trends in hybrid imaging.

    PubMed

    Hricak, Hedvig; Choi, Byung Ihn; Scott, Andrew M; Sugimura, Kazuro; Muellner, Ada; von Schulthess, Gustav K; Reiser, Maximilian F; Graham, Michael M; Dunnick, N Reed; Larson, Steven M

    2010-11-01

    At the 2009 Scientific Assembly and Annual Meeting of the Radiological Society of North America, a special session was devoted to global trends in hybrid imaging. This article expands on the key points of the session, focusing primarily on positron emission tomography/computed tomography. Global trends in hybrid imaging equipment acquisition, usage, and image interpretation practices are reviewed, and emerging requirements for training and clinical privileging are discussed. Also considered are the current benefits of hybrid imaging for patient care and workflow and the potential of hybrid imaging for advancing drug development and personalized medicine. PMID:20829539

  20. Colloidal thermoresponsive gel forming hybrids.

    PubMed

    Liu, Ruixue; Tirelli, Nicola; Cellesi, Francesco; Saunders, Brian R

    2010-09-15

    Colloidal hybrids comprise organic and inorganic components and are attracting considerable attention in the literature. Recently, we reported hybrid anisotropic microsheets that formed thermoresponsive gels in polymer solutions [Liu et al., Langmuir, 25, 490, 2009]. Here, we investigate the composition and properties of these hybrid colloids themselves in detail for the first time. Three different cationic PNIPAm (N-isopropylacrylamide) graft copolymers and two inorganic nanoparticle types (laponite and Ludox silica) were used to prepare a range of hybrids. Anisotropic microsheets only formed when laponite particles were added to the copolymer implying directed self-assembly. Aqueous dispersions of the microsheets spontaneously formed gels at room temperature and these gels were thermoresponsive. They represent a new class of gel forming colloid and are termed thermoresponsive gel forming hybrids. The compositions of the hybrids were determined from thermogravimetric analysis and those that gave gel forming behaviour identified. Variable-temperature rheology experiments showed that the elasticity of the gels increased linearly with temperature. The reversibility of the thermally-triggered changes in gel elasticity was investigated. The concentration dependence of the rheology data was well described by elastic percolation scaling theory and the data could be collapsed onto a master curve. The concentration exponent for the elastic modulus was 2.5. The strong attractive interactions that exist between the dispersed gel forming hybrids was demonstrated by the formation of stable thermoresponsive hybrid hydrogels through casting of hybrid dispersions. PMID:20561633

  1. Hybridized Graphene Materials

    NASA Astrophysics Data System (ADS)

    Robinson, Jeremy

    2015-03-01

    Graphene's high-quality structure and properties continue to motivate intensive research to mold it into the electronic material of the future. Analogous to other electronic materials, however, defects are a tool to engineer graphene's properties and tune its response to various stimuli. In this talk I discuss our efforts to engineer and manipulate defects in hybrid graphene materials for applications ranging from sensing to nanomechanical structures. First, I will present our results using chemically modified graphene to not only improve chemical sensing, but also achieve new functionality for electronic systems. In particular, we hybridize graphene via the addition of fluorine atoms and show the subsequent formation of nanoribbons and tunnel barriers exploiting property changes from the fluorine adsorbates. Second, I will present results on the electronic hybridization of stacked graphene layers, where the moiré pattern formed by the relative twist between layers is responsible for new properties of the bilayer system. Defects specific to this system include rotational disorder, strain, and chemical doping. These defects modify, but do not destroy the strong interlayer coupling. Finally, I will present results on the influence of chemistry and defects on the properties of graphene nanomechanical systems. By measuring the response of high-quality nanomehcanical resonators, we can extract relevant mechanical properties including tension, yield strength, resilience, and modulus as a function of defect introduction. This work is carried out in collaboration with M. Zalalutdinov, P.E. Sheehan, W.-K. Lee, T. Reinecke, S.W. Schmucker, J.C. Culbertson, and A.L. Friedman at Naval Research Laboratory, and T. Ohta, T.E. Beechem and B. Diaconescu at Sandia National Laboratories.

  2. Hybrid receiver study

    NASA Technical Reports Server (NTRS)

    Stone, M. S.; Mcadam, P. L.; Saunders, O. W.

    1977-01-01

    The results are presented of a 4 month study to design a hybrid analog/digital receiver for outer planet mission probe communication links. The scope of this study includes functional design of the receiver; comparisons between analog and digital processing; hardware tradeoffs for key components including frequency generators, A/D converters, and digital processors; development and simulation of the processing algorithms for acquisition, tracking, and demodulation; and detailed design of the receiver in order to determine its size, weight, power, reliability, and radiation hardness. In addition, an evaluation was made of the receiver's capabilities to perform accurate measurement of signal strength and frequency for radio science missions.

  3. Hybrid power semiconductor

    NASA Technical Reports Server (NTRS)

    Chen, D. Y.

    1985-01-01

    The voltage rating of a bipolar transistor may be greatly extended while at the same time reducing its switching time by operating it in conjunction with FETs in a hybrid circuit. One FET is used to drive the bipolar transistor while the other FET is connected in series with the transistor and an inductive load. Both FETs are turned on or off by a single drive signal of load power, the second FET upon ceasing conductions, rendering one power electrode of the bipolar transistor open. Means are provided to dissipate currents which flow after the bipolar transistor is rendered nonconducting.

  4. Hybrid Terrain Database

    NASA Technical Reports Server (NTRS)

    Arthur, Trey

    2006-01-01

    A prototype hybrid terrain database is being developed in conjunction with other databases and with hardware and software that constitute subsystems of aerospace cockpit display systems (known in the art as synthetic vision systems) that generate images to increase pilots' situation awareness and eliminate poor visibility as a cause of aviation accidents. The basic idea is to provide a clear view of the world around an aircraft by displaying computer-generated imagery derived from an onboard database of terrain, obstacle, and airport information.

  5. Robust hybrid mass damper

    NASA Astrophysics Data System (ADS)

    Collette, C.; Chesné, S.

    2016-08-01

    In this paper, the design of a hybrid mass damper (HMD) is proposed for the reduction of the resonant vibration amplitude of a multiple degree-of-freedom structure. HMD includes both passive and active elements. Combining these elements the system is fail-safe and its performances are comparable to usual purely active systems. The control law is a revisited direct velocity feedback. Two zeros are added to the controller to interact with the poles of the plant. The developed control law presents the particularity to be simple and hyperstable. The proposed HMD is compared to other classical control approaches for similar purpose in term of vibration attenuation, power consumption and stroke.

  6. Cryogenic Hybrid Magnetic Bearing

    NASA Technical Reports Server (NTRS)

    Meeks, Crawford R.; Dirusso, Eliseo; Brown, Gerald V.

    1994-01-01

    Cryogenic hybrid magnetic bearing is example of class of magnetic bearings in which permanent magnets and electromagnets used to suspend shafts. Electromagnets provide active control of position of shaft. Bearing operates at temperatures from -320 degrees F (-196 degrees C) to 650 degrees F (343 degrees C); designed for possible use in rocket-engine turbopumps, where effects of cryogenic environment and fluid severely limit lubrication of conventional ball bearings. This and similar bearings also suitable for terrestrial rotating machinery; for example, gas-turbine engines, high-vacuum pumps, canned pumps, precise gimbals that suspend sensors, and pumps that handle corrosive or gritty fluids.

  7. Competitive hybridization models

    NASA Astrophysics Data System (ADS)

    Cherepinsky, Vera; Hashmi, Ghazala; Mishra, Bud

    2010-11-01

    Microarray technology, in its simplest form, allows one to gather abundance data for target DNA molecules, associated with genomes or gene-expressions, and relies on hybridizing the target to many short probe oligonucleotides arrayed on a surface. While for such multiplexed reactions conditions are optimized to make the most of each individual probe-target interaction, subsequent analysis of these experiments is based on the implicit assumption that a given experiment yields the same result regardless of whether it was conducted in isolation or in parallel with many others. It has been discussed in the literature that this assumption is frequently false, and its validity depends on the types of probes and their interactions with each other. We present a detailed physical model of hybridization as a means of understanding probe interactions in a multiplexed reaction. Ultimately, the model can be derived from a system of ordinary differential equations (ODE’s) describing kinetic mass action with conservation-of-mass equations completing the system. We examine pairwise probe interactions in detail and present a model of “competition” between the probes for the target—especially, when the target is effectively in short supply. These effects are shown to be predictable from the affinity constants for each of the four probe sequences involved, namely, the match and mismatch sequences for both probes. These affinity constants are calculated from the thermodynamic parameters such as the free energy of hybridization, which are in turn computed according to the nearest neighbor (NN) model for each probe and target sequence. Simulations based on the competitive hybridization model explain the observed variability in the signal of a given probe when measured in parallel with different groupings of other probes or individually. The results of the simulations can be used for experiment design and pooling strategies, based on which probes have been shown to have a strong

  8. The Hybrid Advantage: Graduate Student Perspectives of Hybrid Education Courses

    ERIC Educational Resources Information Center

    Hall, Sarah; Villareal, Donna

    2015-01-01

    Hybrid courses combine online and face-to-face learning environments. To organize and teach hybrid courses, instructors must understand the uses of multiple online learning tools and face-toface classroom activities to promote and monitor the progress of students. The purpose of this phenomenological study was to explore the perspectives of…

  9. Hybrid vehicle potential assessment. Volume 7: Hybrid vehicle review

    NASA Technical Reports Server (NTRS)

    Leschly, K. O.

    1979-01-01

    Review of hybrid vehicles built during the past ten years or planned to be built in the near future is presented. An attempt is made to classify and analyze these vehicles to get an overall picture of their key characteristics. The review includes onroad hybrid passenger cars, trucks, vans, and buses.

  10. Phoxonic Hybrid Superlattice.

    PubMed

    Alonso-Redondo, Elena; Huesmann, Hannah; El Boudouti, El-Houssaine; Tremel, Wolfgang; Djafari-Rouhani, Bahram; Butt, Hans-Juergen; Fytas, George

    2015-06-17

    We studied experimentally and theoretically the direction-dependent elastic and electromagnetic wave propagation in a supported film of hybrid PMMA (poly[methyl-methacrylate])-TiO2 superlattice (SL). In the direction normal to the layers, this one-dimensional periodic structure opens propagation band gaps for both hypersonic (GHz) phonons and near-UV photons. The high mismatch of elastic and optical impedance results in a large dual phoxonic band gap. The presence of defects inherent to the spin-coating fabrication technique is sensitively manifested in the band gap region. Utilizing Brillouin light scattering, phonon propagation along the layers was observed to be distinctly different from propagation normal to them and can, under certain conditions (SL thickness and substrate elasticity), reveal the nanomechanical properties of the constituent layers. Besides the first realization of unidirectional phoxonic behavior, hybrid (soft-hard) periodic materials are a promising simple platform for opto-acoustic interactions and applications such as filters and Bragg mirrors. PMID:25855860

  11. New smooth hybrid inflation

    SciTech Connect

    Lazarides, George; Vamvasakis, Achilleas

    2007-10-15

    We consider the extension of the supersymmetric Pati-Salam model which solves the b-quark mass problem of supersymmetric grand unified models with exact Yukawa unification and universal boundary conditions and leads to the so-called new shifted hybrid inflationary scenario. We show that this model can also lead to a new version of smooth hybrid inflation based only on renormalizable interactions provided that a particular parameter of its superpotential is somewhat small. The potential possesses valleys of minima with classical inclination, which can be used as inflationary paths. The model is consistent with the fitting of the three-year Wilkinson microwave anisotropy probe data by the standard power-law cosmological model with cold dark matter and a cosmological constant. In particular, the spectral index turns out to be adequately small so that it is compatible with the data. Moreover, the Pati-Salam gauge group is broken to the standard model gauge group during inflation and, thus, no monopoles are formed at the end of inflation. Supergravity corrections based on a nonminimal Kaehler potential with a convenient choice of a sign keep the spectral index comfortably within the allowed range without generating maxima and minima of the potential on the inflationary path. So, unnatural restrictions on the initial conditions for inflation can be avoided.

  12. Hybrid Turbine Electric Vehicle

    NASA Technical Reports Server (NTRS)

    Viterna, Larry A.

    1997-01-01

    Hybrid electric power trains may revolutionize today's ground passenger vehicles by significantly improving fuel economy and decreasing emissions. The NASA Lewis Research Center is working with industry, universities, and Government to develop and demonstrate a hybrid electric vehicle. Our partners include Bowling Green State University, the Cleveland Regional Transit Authority, Lincoln Electric Motor Division, the State of Ohio's Department of Development, and Teledyne Ryan Aeronautical. The vehicle will be a heavy class urban transit bus offering double the fuel economy of today's buses and emissions that are reduced to 1/10th of the Environmental Protection Agency's standards. At the heart of the vehicle's drive train is a natural-gas-fueled engine. Initially, a small automotive engine will be tested as a baseline. This will be followed by the introduction of an advanced gas turbine developed from an aircraft jet engine. The engine turns a high-speed generator, producing electricity. Power from both the generator and an onboard energy storage system is then provided to a variable-speed electric motor attached to the rear drive axle. An intelligent power-control system determines the most efficient operation of the engine and energy storage system.

  13. Arabidopsis hybrid speciation processes

    PubMed Central

    Schmickl, Roswitha; Koch, Marcus A.

    2011-01-01

    The genus Arabidopsis provides a unique opportunity to study fundamental biological questions in plant sciences using the diploid model species Arabidopsis thaliana and Arabidopsis lyrata. However, only a few studies have focused on introgression and hybrid speciation in Arabidopsis, although polyploidy is a common phenomenon within this genus. More recently, there is growing evidence of significant gene flow between the various Arabidopsis species. So far, we know Arabidopsis suecica and Arabidopsis kamchatica as fully stabilized allopolyploid species. Both species evolved during Pleistocene glaciation and deglaciation cycles in Fennoscandinavia and the amphi-Beringian region, respectively. These hybrid studies were conducted either on a phylogeographic scale or reconstructed experimentally in the laboratory. In our study we focus at a regional and population level. Our research area is located in the foothills of the eastern Austrian Alps, where two Arabidopsis species, Arabidopsis arenosa and A. lyrata ssp. petraea, are sympatrically distributed. Our hypothesis of genetic introgression, migration, and adaptation to the changing environment during the Pleistocene has been confirmed: We observed significant, mainly unidirectional gene flow between the two species, which has given rise to the tetraploid A. lyrata. This cytotype was able to escape from the narrow ecological niche occupied by diploid A. lyrata ssp. petraea on limestone outcrops by migrating northward into siliceous areas, leaving behind a trail of genetic differentiation. PMID:21825128

  14. Electric/Hybrid Vehicle Simulation

    NASA Technical Reports Server (NTRS)

    Slusser, R. A.; Chapman, C. P.; Brennand, J. P.

    1985-01-01

    ELVEC computer program provides vehicle designer with simulation tool for detailed studies of electric and hybrid vehicle performance and cost. ELVEC simulates performance of user-specified electric or hybrid vehicle under user specified driving schedule profile or operating schedule. ELVEC performs vehicle design and life cycle cost analysis.

  15. Hybrid spread spectrum radio system

    DOEpatents

    Smith, Stephen F [London, TN; Dress, William B [Camas, WA

    2010-02-09

    Systems and methods are described for hybrid spread spectrum radio systems. A method, includes receiving a hybrid spread spectrum signal including: fast frequency hopping demodulating and direct sequence demodulating a direct sequence spread spectrum signal, wherein multiple frequency hops occur within a single data-bit time and each bit is represented by chip transmissions at multiple frequencies.

  16. Electric-hybrid-vehicle simulation

    NASA Astrophysics Data System (ADS)

    Pasma, D. C.

    The simulation of electric hybrid vehicles is to be performed using experimental data to model propulsion system components. The performance of an existing ac propulsion system will be used as the baseline for comparative purposes. Hybrid components to be evaluated include electrically and mechanically driven flywheels, and an elastomeric regenerative braking system.

  17. Expanding Discourse Repertoires with Hybridity

    ERIC Educational Resources Information Center

    Kelly, Gregory J.

    2012-01-01

    In "Hybrid discourse practice and science learning" Kamberelis and Wehunt present a theoretically rich argument about the potential of hybrid discourses for science learning. These discourses draw from different forms of "talk, social practice, and material practices" to create interactions that are "intertextually complex" and "interactionally…

  18. Hybrid Power Management

    NASA Technical Reports Server (NTRS)

    Eichenberg, Dennis

    2005-01-01

    An engineering discipline denoted as hybrid power management (HPM) has emerged from continuing efforts to increase energy efficiency and reliability of hybrid power systems. HPM is oriented toward integration of diverse electric energy-generating, energy-storing, and energy-consuming devices in optimal configurations for both terrestrial and outer-space applications. The basic concepts of HPM are potentially applicable at power levels ranging from nanowatts to megawatts. Potential applications include terrestrial power-generation, terrestrial transportation, biotechnology, and outer-space power systems. Instances of this discipline at prior stages of development were reported (though not explicitly labeled as HPM) in three prior NASA Tech Briefs articles: "Ultracapacitors Store Energy in a Hybrid Electric Vehicle"(LEW-16876), Vol. 24, No. 4 (April 2000), page 63; "Photovoltaic Power Station With Ultracapacitors for Storage" (LEW-17177), Vol. 27, No. 8 (August 2003), page 38; and "Flasher Powered by Photovoltaic Cells and Ultracapacitors" (LEW-17246), Vol. 24, No. 10 (October 2003), page 37. As the titles of the cited articles indicate, the use of ultracapacitors as energy-storage devices lies at the heart of HPM. An ultracapacitor is an electrochemical energy-storage device, but unlike in a conventional rechargeable electrochemical cell or battery, chemical reactions do not take place during operation. Instead, energy is stored electrostatically at an electrode/electrolyte interface. The capacitance per unit volume of an ultracapacitor is much greater than that of a conventional capacitor because its electrodes have much greater surface area per unit volume and the separation between the electrodes is much smaller. Power-control circuits for ultracapacitors can be simpler than those for batteries, for two reasons: (1) Because of the absence of chemical reactions, charge and discharge currents can be greater than those in batteries, limited only by the electrical

  19. Molecular evidence for hybridization in Colias (Lepidoptera: Pieridae): are Colias hybrids really hybrids?

    PubMed

    Dwyer, Heather E; Jasieniuk, Marie; Okada, Miki; Shapiro, Arthur M

    2015-07-01

    Gene flow and hybridization among species dramatically affect our understanding of the species as a biological unit, species relationships, and species adaptations. In North American Colias eurytheme and Colias eriphyle, there has been historical debate over the extent of hybridization occurring and the identity of phenotypically intermediate individuals as genetic hybrids. This study assesses the population structure of these two species to measure the extent of hybridization and the genetic identity of phenotypic intermediates as hybrids. Amplified fragment length polymorphism (AFLP) marker analysis was performed on 378 specimens collected from northern California and Nevada. Population structure was inferred using a Bayesian/Markov chain Monte Carlo method, which probabilistically assigns individuals to genetic clusters. Three genetic clusters provided the best fit for the data. C. eurytheme individuals were primarily assigned to two closely related clusters, and C. eriphyle individuals were mostly assigned to a third, more distantly related cluster. There appeared to be significant hybridization between the two species. Individuals of intermediate phenotype (putative hybrids) were found to be genetically indistinguishable from C. eriphyle, indicating that previous work based on the assumption that these intermediate forms are hybrids may warrant reconsideration. PMID:26306172

  20. Molecular evidence for hybridization in Colias (Lepidoptera: Pieridae): are Colias hybrids really hybrids?

    PubMed Central

    Dwyer, Heather E; Jasieniuk, Marie; Okada, Miki; Shapiro, Arthur M

    2015-01-01

    Gene flow and hybridization among species dramatically affect our understanding of the species as a biological unit, species relationships, and species adaptations. In North American Colias eurytheme and Colias eriphyle, there has been historical debate over the extent of hybridization occurring and the identity of phenotypically intermediate individuals as genetic hybrids. This study assesses the population structure of these two species to measure the extent of hybridization and the genetic identity of phenotypic intermediates as hybrids. Amplified fragment length polymorphism (AFLP) marker analysis was performed on 378 specimens collected from northern California and Nevada. Population structure was inferred using a Bayesian/Markov chain Monte Carlo method, which probabilistically assigns individuals to genetic clusters. Three genetic clusters provided the best fit for the data. C. eurytheme individuals were primarily assigned to two closely related clusters, and C. eriphyle individuals were mostly assigned to a third, more distantly related cluster. There appeared to be significant hybridization between the two species. Individuals of intermediate phenotype (putative hybrids) were found to be genetically indistinguishable from C. eriphyle, indicating that previous work based on the assumption that these intermediate forms are hybrids may warrant reconsideration. PMID:26306172

  1. ADVANCED HYBRID PARTICULATE COLLECTOR

    SciTech Connect

    Stanley Miller; Rich Gebert; William Swanson

    1999-11-01

    A new concept in particulate control, called an advanced hybrid particulate collector (AHPC), is being developed under funding from the US Department of Energy. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in a manner that has not been done before. The AHPC concept consists of a combination of fabric filtration and electrostatic precipitation in the same housing, providing major synergism between the two collection methods, both in the particulate collection step and in the transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emission with conventional ESPs, and it solves the problem of reentrainment and collection of dust in conventional baghouses. The AHPC is currently being tested at the 2.7-MW scale at the Big Stone power station.

  2. Hybrid Electric Transit Bus

    NASA Technical Reports Server (NTRS)

    Viterna, Larry A.

    1997-01-01

    A government, industry, and university cooperative is developing an advanced hybrid electric city transit bus. Goals of this effort include doubling the fuel economy compared to current buses and reducing emissions to one-tenth of current EPA standards. Unique aspects of the vehicle's power system include the use of ultra-capacitors as an energy storage system, and a planned natural gas fueled turbogenerator developed from a small jet engine. Power from both the generator and energy storage system is provided to a variable speed electric motor attached to the rear axle. At over 15000 kg gross weight, this is the largest vehicle of its kind ever built using ultra-capacitor energy storage. This paper describes the overall power system architecture, the evolution of the control strategy, and its performance over industry standard drive cycles.

  3. Hybridized polymer matrix composites

    NASA Technical Reports Server (NTRS)

    Henshaw, J.

    1983-01-01

    Methods of improving the fire resistance of graphite epoxy composite laminates were investigated with the objective of reducing the volume of loose graphite fibers disseminated into the airstream as the result of a high intensity aircraft fuel fire. Improvements were sought by modifying the standard graphite epoxy systems without significantly negating their structural effectiveness. The modifications consisted primarily of an addition of a third constituent material such as glass fibers, glass flakes, carbon black in a glassy resin. These additions were designed to encourage coalescense of the graphite fibers and thereby reduce their aerodynamic float characteristics. A total of 38 fire tests were conducted on thin (1.0 mm) and thick (6.0 mm) hybrid panels.

  4. Hybrid powertrain controller

    DOEpatents

    Jankovic, Miroslava; Powell, Barry Kay

    2000-12-26

    A hybrid powertrain for a vehicle comprising a diesel engine and an electric motor in a parallel arrangement with a multiple ratio transmission located on the torque output side of the diesel engine, final drive gearing connecting drivably the output shaft of transmission to traction wheels of the vehicle, and an electric motor drivably coupled to the final drive gearing. A powertrain controller schedules fuel delivered to the diesel engine and effects a split of the total power available, a portion of the power being delivered by the diesel and the balance of the power being delivered by the motor. A shifting schedule for the multiple ratio transmission makes it possible for establishing a proportional relationship between accelerator pedal movement and torque desired at the wheels. The control strategy for the powertrain maintains drivability of the vehicle that resembles drivability of a conventional spark ignition vehicle engine powertrain while achieving improved fuel efficiency and low exhaust gas emissions.

  5. Hybrid powertrain system

    DOEpatents

    Grillo, Ricardo C.; O'Neil, Walter K.; Preston, David M.

    2005-09-20

    A hybrid powertrain system is provided that includes a first prime mover having a rotational output, a second prime mover having a rotational output, and a transmission having a main shaft supporting at least two main shaft gears thereon. The transmission includes a first independent countershaft drivingly connected to the first prime mover and including at least one ratio gear supported thereon that meshes with a respective main shaft gear. A second independent countershaft is drivingly connected to the second prime mover and includes at least one ratio gear supported thereon that meshes with a respective main shaft gear. The ratio gears on the first and second countershafts cooperate with the main shaft gears to provide at least one gear ratio between the first and second countershafts and the main shaft. A shift control mechanism selectively engages and disengages the first and second countershafts for rotation with the main shaft.

  6. Hybrid Heat Exchangers

    NASA Technical Reports Server (NTRS)

    Tu, Jianping Gene; Shih, Wei

    2010-01-01

    A hybrid light-weight heat exchanger concept has been developed that uses high-conductivity carbon-carbon (C-C) composites as the heat-transfer fins and uses conventional high-temperature metals, such as Inconel, nickel, and titanium as the parting sheets to meet leakage and structural requirements. In order to maximize thermal conductivity, the majority of carbon fiber is aligned in the fin direction resulting in 300 W/m.K or higher conductivity in the fin directions. As a result of this fiber orientation, the coefficient of thermal expansion (CTE) of the C-C composite in both non-fiber directions matches well with the CTE of various high-temperature metal alloys. This allows the joining of fins and parting sheets by using high-temperature braze alloys.

  7. Recognition Using Hybrid Classifiers.

    PubMed

    Osadchy, Margarita; Keren, Daniel; Raviv, Dolev

    2016-04-01

    A canonical problem in computer vision is category recognition (e.g., find all instances of human faces, cars etc., in an image). Typically, the input for training a binary classifier is a relatively small sample of positive examples, and a huge sample of negative examples, which can be very diverse, consisting of images from a large number of categories. The difficulty of the problem sharply increases with the dimension and size of the negative example set. We propose to alleviate this problem by applying a "hybrid" classifier, which replaces the negative samples by a prior, and then finds a hyperplane which separates the positive samples from this prior. The method is extended to kernel space and to an ensemble-based approach. The resulting binary classifiers achieve an identical or better classification rate than SVM, while requiring far smaller memory and lower computational complexity to train and apply. PMID:26959677

  8. Hybrid Natural Inflation

    NASA Astrophysics Data System (ADS)

    Ross, Graham G.; Germán, Gabriel; Vázquez, J. Alberto

    2016-05-01

    We construct two simple effective field theory versions of Hybrid Natural Inflation (HNI) that illustrate the range of its phenomenological implications. The resulting inflationary sector potential, V = Δ4(1 + acos( ϕ/f)), arises naturally, with the inflaton field a pseudo-Nambu-Goldstone boson. The end of inflation is triggered by a waterfall field and the conditions for this to happen are determined. Also of interest is the fact that the slow-roll parameter ɛ (and hence the tensor r) is a non-monotonic function of the field with a maximum where observables take universal values that determines the maximum possible tensor to scalar ratio r. In one of the models the inflationary scale can be as low as the electroweak scale. We explore in detail the associated HNI phenomenology, taking account of the constraints from Black Hole production, and perform a detailed fit to the Planck 2015 temperature and polarisation data.

  9. Hybrid community energy systems.

    SciTech Connect

    Jody, B. J.; Daniels, E. J.; Karvelas, D. E.; Energy Systems

    2000-01-01

    The availability of efficient, economical, and reliable energy supplies can help attract industry and commercial businesses to a municipality or a region. Efficient use of energy can also improve the air quality and reduce pollution. Therefore, municipalities should explore and encourage the development and implementation of efficient energy systems. Integrated hybrid energy systems can be designed to meet the total energy requirements of large and small communities. These systems can yield significant energy and cost savings when compared with independent systems serving individual units or when compared with the conventional practice of buying power from a utility and producing thermal energy on-site. To maximize energy and cost savings, the design engineer should look beyond the conventional when designing such systems.

  10. Hybrid vehicle control

    SciTech Connect

    Shallvari, Iva; Velnati, Sashidhar; DeGroot, Kenneth P.

    2015-07-28

    A method and apparatus for heating a catalytic converter's catalyst to an efficient operating temperature in a hybrid electric vehicle when the vehicle is in a charge limited mode such as e.g., the charge depleting mode or when the vehicle's high voltage battery is otherwise charge limited. The method and apparatus determine whether a high voltage battery of the vehicle is incapable of accepting a first amount of charge associated with a first procedure to warm-up the catalyst. If it is determined that the high voltage battery is incapable of accepting the first amount of charge, a second procedure with an acceptable amount of charge is performed to warm-up the catalyst.

  11. Hybrid Systems Diagnosis

    NASA Technical Reports Server (NTRS)

    McIlraith, Sheila; Biswas, Gautam; Clancy, Dan; Gupta, Vineet

    2005-01-01

    This paper reports on an on-going Project to investigate techniques to diagnose complex dynamical systems that are modeled as hybrid systems. In particular, we examine continuous systems with embedded supervisory controllers that experience abrupt, partial or full failure of component devices. We cast the diagnosis problem as a model selection problem. To reduce the space of potential models under consideration, we exploit techniques from qualitative reasoning to conjecture an initial set of qualitative candidate diagnoses, which induce a smaller set of models. We refine these diagnoses using parameter estimation and model fitting techniques. As a motivating case study, we have examined the problem of diagnosing NASA's Sprint AERCam, a small spherical robotic camera unit with 12 thrusters that enable both linear and rotational motion.

  12. Hybrid Filter Membrane

    NASA Technical Reports Server (NTRS)

    Laicer, Castro; Rasimick, Brian; Green, Zachary

    2012-01-01

    Cabin environmental control is an important issue for a successful Moon mission. Due to the unique environment of the Moon, lunar dust control is one of the main problems that significantly diminishes the air quality inside spacecraft cabins. Therefore, this innovation was motivated by NASA s need to minimize the negative health impact that air-suspended lunar dust particles have on astronauts in spacecraft cabins. It is based on fabrication of a hybrid filter comprising nanofiber nonwoven layers coated on porous polymer membranes with uniform cylindrical pores. This design results in a high-efficiency gas particulate filter with low pressure drop and the ability to be easily regenerated to restore filtration performance. A hybrid filter was developed consisting of a porous membrane with uniform, micron-sized, cylindrical pore channels coated with a thin nanofiber layer. Compared to conventional filter media such as a high-efficiency particulate air (HEPA) filter, this filter is designed to provide high particle efficiency, low pressure drop, and the ability to be regenerated. These membranes have well-defined micron-sized pores and can be used independently as air filters with discreet particle size cut-off, or coated with nanofiber layers for filtration of ultrafine nanoscale particles. The filter consists of a thin design intended to facilitate filter regeneration by localized air pulsing. The two main features of this invention are the concept of combining a micro-engineered straight-pore membrane with nanofibers. The micro-engineered straight pore membrane can be prepared with extremely high precision. Because the resulting membrane pores are straight and not tortuous like those found in conventional filters, the pressure drop across the filter is significantly reduced. The nanofiber layer is applied as a very thin coating to enhance filtration efficiency for fine nanoscale particles. Additionally, the thin nanofiber coating is designed to promote capture of

  13. Hybrid multitarget tracking system

    NASA Astrophysics Data System (ADS)

    Subramanian, Aswinikumar; Hassebrook, Laurence G.; Ghosal, Sugata; Kim, Michael

    1992-11-01

    A common function for human being is to detect the movement of an object against a stationary background and then to lock on to and trace its motion. This natural process becomes very tedious in industrial or military environments where the database of images to be searched is huge or where the function is to be repeated continuously. Thus automation can assist people carrying out such tasks. This is the case in security systems, military reconnaissance, military targeting, aircraft tracking, assembly line manufacturing systems, and quality control. We present a hybrid system to do such tasks. The technique is simulated on computer using numerical algorithms and is successful under many situations. For implementation an ideal system using optical components is presented. This hybrid system employs three main subsystems which are combined in such a way as to compensate for each other's drawbacks yet enhance each other's virtues. The first system is a velocity correlation system which correlates two adjacent frames in a sequence of image frames. The resultant velocity correlations are searched to find the potential velocity profiles at which an object may be moving. These velocity profiles are then processed by the multi-frame mean subsystem which performs a geometric (or arithmetic mean) operation on the image frames. These frames are displaced by the selected velocity profiles and thereby aligning the object in the given frames for detection. Algorithms have been developed and tested to perform this technique on selected databases. Also algorithms to synthesize test images have been developed and the results are presented.

  14. Antibacterial Biomimetic Hybrid Films

    PubMed Central

    Ferrer, M. Carme Coll; Hickok, Noreen J.; Eckmann, David M.; Composto, Russell J.

    2012-01-01

    In this work, we present a novel method to prepare a hybrid coating based on dextran grafted to a substrate and embedded with silver nanoparticles (Ag NPs). First, the Ag NPs are synthesized in situ in the presence of oxidized dextran in solution. Second, the oxidized dextran is exposed to an amine functionalized surface resulting in the simultaneous grafting of dextran and the trapping of Ag NPs within the layer. The NP loading is controlled by the concentration of silver nitrate, which is 2 mM (DEX-Ag2) and 5 mM (DEX-Ag5). The dried film thickness increases with silver nitrate concentration from 2 nm for dextran to 7 nm and 12 nm for DEX-Ag2 and DEX-Ag5, respectively. The grafted dextran film displays features with a diameter and height of ~ 50 nm and 2 nm, respectively. For the DEX-Ag2 and DEX-Ag5, the dextran features as well as individual Ag NPs (~ 5 nm) and aggregates of Ag NPs are observed. Larger and more irregular aggregates are observed for DEX-Ag5. Overall, the Ag NPs are embedded in the dextran film as suggested by AFM and UVO studies. In terms of its antimicrobial activity, DEX-Ag2 resists bacterial adhesion to a greater extent than DEX-Ag5, which in turn is better than dextran and silicon. Because these antibacterial hybrid coatings can be grafted to a variety of surfaces, many biomedical applications can be envisioned, ranging from coating implants to catheters. PMID:23807896

  15. Nonminimally coupled hybrid inflation

    SciTech Connect

    Koh, Seoktae; Minamitsuji, Masato

    2011-02-15

    We discuss the hybrid inflation model where the inflaton field is nonminimally coupled to gravity. In the Jordan frame, the potential contains {phi}{sup 4} term as well as terms in the original hybrid inflation model. In our model, inflation can be classified into the type (I) and the type (II). In the type (I), inflation is terminated by the tachyonic instability of the waterfall field, while in the type (II) by the violation of slow-roll conditions. In our model, the reheating takes place only at the true minimum and even in the case (II) finally the tachyonic instability occurs after the termination of inflation. For a negative nonminimal coupling, inflation takes place in the vacuum-dominated region, in the large field region, or near the local minimum/maximum. Inflation in the vacuum-dominated region becomes either the type (I) or (II), resulting in a blue or red spectrum of the curvature perturbations, respectively. Inflation around the local maximum can be either the type (I) or the type (II), which results in the red spectrum of the curvature perturbations, while around the local minimum it must be the type (I), which results in the blue spectrum. In the large field region, to terminate inflation, potential in the Einstein frame must be positively tilted, always resulting in the red spectrum. We then numerically solve the equations of motion to investigate the whole dynamics of inflaton and confirm that the spectrum of curvature perturbations changes from red to blue ones as scales become smaller.

  16. Ball Aerospace Hybrid Space Cryocoolers

    NASA Astrophysics Data System (ADS)

    Gully, W.; Glaister, D. S.; Hendershott, P.; Kotsubo, V.; Lock, J. S.; Marquardt, E.

    2008-03-01

    This paper describes the design, development, testing, and performance at Ball Aerospace of a long-life hybrid (combination of Stirling and Joule-Thomson [J-T] thermodynamic cycles) space cryocooler. Hybrid coolers are synergistic combinations of two thermodynamic cycles that combine advantages of each cycle to yield overall improved performance. Hybrid cooler performance advantages include: 1) load leveling of large heat loads; 2) remote cryogenic cooling with very low to negligible induced vibration and jitter; 3) very low redundant (off state) cooler penalties; 4) high power efficiency, especially at low temperatures; and 5) simplified system integration with capability to cross gimbals and no need for thermal straps or switches. Ball Aerospace is currently developing several different hybrid cooler systems. The 35 K hybrid cooler provides 2.0 W at 35 K and 8.5 W at 85 K with an emphasis on load leveling of high transient heat loads and remote, low vibration cooling. The 10 K hybrid cooler provides 200 mW at 10 K, 700 mW at 15 K, and 10.7 W at 85 K with an emphasis on power efficiency. In addition, Ball Aerospace built and tested a complete hybrid cooler that met the requirements of the JWST Mid-Infrared Instrument (MIRI) cooler including providing 80 mW at 6 K and 100 mW at 18 K for a total system (28 V) power of 310 W.

  17. Hybridization increases invasive knotweed success

    PubMed Central

    Parepa, Madalin; Fischer, Markus; Krebs, Christine; Bossdorf, Oliver

    2014-01-01

    Hybridization is one of the fundamental mechanisms by which rapid evolution can occur in exotic species. If hybrids show increased vigour, this could significantly contribute to invasion success. Here, we compared the success of the two invasive knotweeds, Fallopia japonica and F. sachalinensis, and their hybrid, F. × bohemica, in competing against experimental communities of native plants. Using plant material from multiple clones of each taxon collected across a latitudinal gradient in Central Europe, we found that knotweed hybrids performed significantly better in competition with a native community and that they more strongly reduced the growth of the native plants. One of the parental species, F. sachalinensis, regenerated significantly less well from rhizomes, and this difference disappeared if activated carbon was added to the substrate, which suggests allelopathic inhibition of F. sachalinensis regeneration by native plants. We found substantial within-taxon variation in competitive success in all knotweed taxa, but variation was generally greatest in the hybrid. Interestingly, there was also significant variation within the genetically uniform F. japonica, possibly reflecting epigenetic differences. Our study shows that invasive knotweed hybrids are indeed more competitive than their parents and that hybridization increased the invasiveness of the exotic knotweed complex. PMID:24665343

  18. Hybrid deorbit motor design feasibility

    NASA Technical Reports Server (NTRS)

    Hastings, Joseph H.

    1993-01-01

    This paper addresses the feasibility of using a hybrid rocket motor to deorbit the large booster stage of the proposed NLS. A hybrid motor was of interest because it could utilize the residual low pressure Gox from the boosters main engine Lox tank. The resulting study determines that the concept would be feasible and should be given further consideration. Also, a preliminary design for a deorbit motor was proposed which would weigh much less than an equivalent hypergolic system. The hybrid deorbit concept and design has the potential of yielding a simpler cost effective system that could also be applicable to future launch systems with similar missions.

  19. Hybrid deorbit motor design feasibility

    NASA Astrophysics Data System (ADS)

    Hastings, Joseph H.

    1993-06-01

    This paper addresses the feasibility of using a hybrid rocket motor to deorbit the large booster stage of the proposed NLS. A hybrid motor was of interest because it could utilize the residual low pressure Gox from the boosters main engine Lox tank. The resulting study determines that the concept would be feasible and should be given further consideration. Also, a preliminary design for a deorbit motor was proposed which would weigh much less than an equivalent hypergolic system. The hybrid deorbit concept and design has the potential of yielding a simpler cost effective system that could also be applicable to future launch systems with similar missions.

  20. Hybrid Vehicle Program. Final report

    SciTech Connect

    1984-06-01

    This report summarizes the activities on the Hybrid Vehicle Program. The program objectives and the vehicle specifications are reviewed. The Hybrid Vehicle has been designed so that maximum use can be made of existing production components with a minimum compromise to program goals. The program status as of the February 9-10 Hardware Test Review is presented, and discussions of the vehicle subsystem, the hybrid propulsion subsystem, the battery subsystem, and the test mule programs are included. Other program aspects included are quality assurance and support equipment. 16 references, 132 figures, 47 tables.

  1. Hybrid Bearing Prognostic Test Rig

    NASA Technical Reports Server (NTRS)

    Dempsey, Paula J.; Certo, Joseph M.; Handschuh, Robert F.; Dimofte, Florin

    2005-01-01

    The NASA Glenn Research Center has developed a new Hybrid Bearing Prognostic Test Rig to evaluate the performance of sensors and algorithms in predicting failures of rolling element bearings for aeronautics and space applications. The failure progression of both conventional and hybrid (ceramic rolling elements, metal races) bearings can be tested from fault initiation to total failure. The effects of different lubricants on bearing life can also be evaluated. Test conditions monitored and recorded during the test include load, oil temperature, vibration, and oil debris. New diagnostic research instrumentation will also be evaluated for hybrid bearing damage detection. This paper summarizes the capabilities of this new test rig.

  2. Nanofluidic mixing via hybrid surface

    SciTech Connect

    Ye, Ziran; Li, Shunbo; Zhou, Bingpu; Hui, Yu Sanna; Shen, Rong; Wen, Weijia

    2014-10-20

    We report the design and fabrication of the nanofluidic mixer comprising hybrid hydrophobic/hydrophilic micro-patterns on the top and bottom walls of the nanochannel. The unique feature of such mixer is that, without any geometric structure inside the nanochannel, the mixing can be realized solely by the hybrid surfaces. Besides, the mixing length in nanomixer has been significantly shortened comparing to micromixer. We attribute the mixing achievement to be caused by the convection and chaotic flows of two fluids along the hybrid surface due to the large surface-to-volume ratio of the nanochannel.

  3. Triplex in-situ hybridization

    DOEpatents

    Fresco, Jacques R.; Johnson, Marion D.

    2002-01-01

    Disclosed are methods for detecting in situ the presence of a target sequence in a substantially double-stranded nucleic acid segment, which comprises: a) contacting in situ under conditions suitable for hybridization a substantially double-stranded nucleic acid segment with a detectable third strand, said third strand being capable of hybridizing to at least a portion of the target sequence to form a triple-stranded structure, if said target sequence is present; and b) detecting whether hybridization between the third strand and the target sequence has occured.

  4. Hybrid codes: Methods and applications

    SciTech Connect

    Winske, D. ); Omidi, N. )

    1991-01-01

    In this chapter we discuss hybrid'' algorithms used in the study of low frequency electromagnetic phenomena, where one or more ion species are treated kinetically via standard PIC methods used in particle codes and the electrons are treated as a single charge neutralizing massless fluid. Other types of hybrid models are possible, as discussed in Winske and Quest, but hybrid codes with particle ions and massless fluid electrons have become the most common for simulating space plasma physics phenomena in the last decade, as we discuss in this paper.

  5. Hybrid Rocket Propulsion for Sounding Rocket Applications

    NASA Technical Reports Server (NTRS)

    1991-01-01

    A discussion of the H-225K hybrid rocket motor, produced by the American Rocket Company, is given. The H-225K motor is presented in terms of the following topics: (1) hybrid rocket fundamentals; (2) hybrid characteristics; and (3) hybrid advantages.

  6. Hybrid Inflatable Pressure Vessel

    NASA Technical Reports Server (NTRS)

    Raboin, Jasen; Valle, Gerard D.; Edeen, Gregg; DeLaFuente, Horacio M.; Schneider, William C.; Spexarth, Gary R.; Johnson, Christopher J.; Pandya, Shalini

    2004-01-01

    Figure 1 shows a prototype of a large pressure vessel under development for eventual use as a habitable module for long spaceflight (e.g., for transporting humans to Mars). The vessel is a hybrid that comprises an inflatable shell attached to a rigid central structural core. The inflatable shell is, itself, a hybrid that comprises (1) a pressure bladder restrained against expansion by (2) a web of straps made from high-strength polymeric fabrics. On Earth, pressure vessels like this could be used, for example, as portable habitats that could be set up quickly in remote locations, portable hyperbaric chambers for treatment of decompression sickness, or flotation devices for offshore platforms. In addition, some aspects of the design of the fabric straps could be adapted to such other items as lifting straps, parachute straps, and automotive safety belts. Figure 2 depicts selected aspects of the design of a vessel of this type with a toroidal configuration. The bladder serves as an impermeable layer to keep air within the pressure vessel and, for this purpose, is sealed to the central structural core. The web includes longitudinal and circumferential straps. To help maintain the proper shape upon inflation after storage, longitudinal and circumferential straps are indexed together at several of their intersections. Because the web is not required to provide a pressure seal and the bladder is not required to sustain structural loads, the bladder and the web can be optimized for their respective functions. Thus, the bladder can be sealed directly to the rigid core without having to include the web in the seal substructure, and the web can be designed for strength. The ends of the longitudinal straps are attached to the ends of the rigid structural core by means of clevises. Each clevis pin is surrounded by a roller, around which a longitudinal strap is wrapped to form a lap seam with itself. The roller is of a large diameter chosen to reduce bending of the fibers in

  7. Hybrid 10 Clinical Trial

    PubMed Central

    Gantz, Bruce J.; Hansen, Marlan R.; Turner, Christopher W.; Oleson, Jacob J.; Reiss, Lina A.; Parkinson, Aaron J.

    2010-01-01

    Acoustic plus electric (electric-acoustic) speech processing has been successful in highlighting the important role of articulation information in consonant recognition in those adults that have profound high-frequency hearing loss at frequencies greater than 1500 Hz and less than 60% discrimination scores. Eighty-seven subjects were enrolled in an adult Hybrid multicenter Food and Drug Administration clinical trial. Immediate hearing preservation was accomplished in 85/87 subjects. Over time (3 months to 5 years), some hearing preservation was maintained in 91% of the group. Combined electric-acoustic processing enabled most of this group of volunteers to gain improved speech understanding, compared to their preoperative hearing, with bilateral hearing aids. Most have preservation of low-frequency acoustic hearing within 15 dB of their preoperative pure tone levels. Those with greater losses (> 30 dB) also benefited from the combination of electric-acoustic speech processing. Postoperatively, in the electric-acoustic processing condition, loss of low-frequency hearing did not correlate with improvements in speech perception scores in quiet. Sixteen subjects were identified as poor performers in that they did not achieve a significant improvement through electric-acoustic processing. A multiple regression analysis determined that 91% of the variance in the poorly performing group can be explained by the preoperative speech recognition score and duration of deafness. Signal-to-noise ratios for speech understanding in noise improved more than 9 dB in some individuals in the electric-acoustic processing condition. The relation between speech understanding in noise thresholds and residual low-frequency acoustic hearing is significant (r = 0.62; p < 0.05). The data suggest that, in general, the advantages gained for speech recognition in noise by preserving residual hearing exist, unless the hearing loss approaches profound levels. Preservation of residual low

  8. Real and Hybrid Atomic Orbitals.

    ERIC Educational Resources Information Center

    Cook, D. B.; Fowler, P. W.

    1981-01-01

    Demonstrates that the Schrodinger equation for the hydrogenlike atom separates in both spheroconal and prolate spheroidal coordinates and that these separations provide a sound theoretical basis for the real and hybrid atomic orbitals. (Author/SK)

  9. A hybrid Brayton engine concept

    NASA Technical Reports Server (NTRS)

    Six, L. D.; Elkins, R.

    1980-01-01

    A first generation open cycle Brayton engine concept for use in full scale solar module testing was defined. The concept extended to include solar/fossil hybrid capability. The combustion system defined for hybrid operation consists of a wide range combustor liner, a single airblast atomizer, an ignitor and a high-voltage ignition unit. Wide range combustor operation would be achieved through combining pilot and primary zones. The hybrid control mode and the solar only control mode are both based on the concept of maintaining constant turbine inlet temperature and varying the engine speed for part-power operation. In addition, the hybrid control concept will allow the operator to set a minimum thermal power input to the engine by setting a corresponding minimum engine speed. When the solar thermal power input falls below this minimum, fossil fuel would be utilized to augment the solar thermal power input.

  10. Optical signal processing: Hybrid success

    NASA Astrophysics Data System (ADS)

    Hayden, Michael

    2007-03-01

    Despite two decades of work geared towards improving the nonlinear optical properties of organic molecules, practical organic light modulators have not yet reached the market in large numbers. New organic-inorganic hybrid approaches may revolutionize the field.

  11. Optimizing hybrid spreading in metapopulations.

    PubMed

    Zhang, Changwang; Zhou, Shi; Miller, Joel C; Cox, Ingemar J; Chain, Benjamin M

    2015-01-01

    Epidemic spreading phenomena are ubiquitous in nature and society. Examples include the spreading of diseases, information, and computer viruses. Epidemics can spread by local spreading, where infected nodes can only infect a limited set of direct target nodes and global spreading, where an infected node can infect every other node. In reality, many epidemics spread using a hybrid mixture of both types of spreading. In this study we develop a theoretical framework for studying hybrid epidemics, and examine the optimum balance between spreading mechanisms in terms of achieving the maximum outbreak size. We show the existence of critically hybrid epidemics where neither spreading mechanism alone can cause a noticeable spread but a combination of the two spreading mechanisms would produce an enormous outbreak. Our results provide new strategies for maximising beneficial epidemics and estimating the worst outcome of damaging hybrid epidemics. PMID:25923411

  12. Optimizing Hybrid Spreading in Metapopulations

    PubMed Central

    Zhang, Changwang; Zhou, Shi; Miller, Joel C.; Cox, Ingemar J.; Chain, Benjamin M.

    2015-01-01

    Epidemic spreading phenomena are ubiquitous in nature and society. Examples include the spreading of diseases, information, and computer viruses. Epidemics can spread by local spreading, where infected nodes can only infect a limited set of direct target nodes and global spreading, where an infected node can infect every other node. In reality, many epidemics spread using a hybrid mixture of both types of spreading. In this study we develop a theoretical framework for studying hybrid epidemics, and examine the optimum balance between spreading mechanisms in terms of achieving the maximum outbreak size. We show the existence of critically hybrid epidemics where neither spreading mechanism alone can cause a noticeable spread but a combination of the two spreading mechanisms would produce an enormous outbreak. Our results provide new strategies for maximising beneficial epidemics and estimating the worst outcome of damaging hybrid epidemics. PMID:25923411

  13. Hybrid-Vehicle Transmission System

    NASA Technical Reports Server (NTRS)

    Lupo, G.; Dotti, G.

    1985-01-01

    Continuously-variable transmission system for hybrid vehicles couples internal-combustion engine and electric motor section, either individually or in parallel, to power vehicle wheels during steering and braking.

  14. Hybrid Fuel Cell Technology Overview

    SciTech Connect

    None available

    2001-05-31

    For the purpose of this STI product and unless otherwise stated, hybrid fuel cell systems are power generation systems in which a high temperature fuel cell is combined with another power generating technology. The resulting system exhibits a synergism in which the combination performs with an efficiency far greater than can be provided by either system alone. Hybrid fuel cell designs under development include fuel cell with gas turbine, fuel cell with reciprocating (piston) engine, and designs that combine different fuel cell technologies. Hybrid systems have been extensively analyzed and studied over the past five years by the Department of Energy (DOE), industry, and others. These efforts have revealed that this combination is capable of providing remarkably high efficiencies. This attribute, combined with an inherent low level of pollutant emission, suggests that hybrid systems are likely to serve as the next generation of advanced power generation systems.

  15. Damage of hybrid composite laminates

    NASA Astrophysics Data System (ADS)

    Haery, Haleh A.; Kim, Ho Sung

    2013-08-01

    Hybrid laminates consisting of woven glass fabric/epoxy composite plies and woven carbon fabric/epoxy composite plies are studied for fatigue damage and residual strength. A theoretical framework based on the systems approach is proposed as a guide to deal with the complexity involving uncertainties and a large number of variables in the hybrid composite system. A relative damage sensitivity factor expression was developed for quantitative comparisons between non-hybrid and hybrid composites. Hypotheses derived from the theoretical framework were tested and verified. The first hypothesis was that the difference between two different sets of properties produces shear stress in interface between carbon fibre reinforced plastics (CRP) and glass fibre reinforced plastics (GRP), and eventually become a source for CRP/GRP interfacial delamination or longitudinal cracking. The second hypothesis was that inter-fibre bundle delamination occurs more severely to CRP sub-system than GRP sub-system.

  16. A hybrid base isolation system

    SciTech Connect

    Hart, G.C.; Lobo, R.F.; Srinivasan, M.; Asher, J.W.

    1995-12-01

    This paper proposes a new analysis procedure for hybrid base isolation buildings when considering the displacement response of a base isolated building to wind loads. The system is considered hybrid because of the presence of viscous dampers in the building above the isolator level. The proposed analysis approach incorporates a detailed site specific wind study combined with a dynamic nonlinear analysis of the building response.

  17. Real and hybrid atomic orbitals

    NASA Astrophysics Data System (ADS)

    Cook, D. B.; Fowler, P. W.

    1981-09-01

    It is shown that the Schrödinger equation for the hydrogenlike atom separates in both spheroconal and prolate spheroidal coordinates and that these separations provide a sound theoretical basis for the real and hybrid atomic orbitals. Thus the real and hybrid atomic orbitals have as sound a pedigree as the more familiar complex orbitals based on the separation of the Schrödinger equation in spherical polar coordinates.

  18. Forced Oscillations for Hybrid Systems

    NASA Astrophysics Data System (ADS)

    Cheshankov, B.

    2009-11-01

    The hybrid system in the paper means a mechanical system which consists from two parts with different structure—a part with distributed parameters and a part with discrete parameters. More concrete the forced longitudinal oscillations of a rod connected with a simple oscillator are considered. The oscillations of the separate parts of the system are very well known. It turned out that the oscillations of this hybrid system propose some difficulties when investigating. The paper proposes an approach to overcome these difficulties.

  19. Hybrid particles and associated methods

    DOEpatents

    Fox, Robert V; Rodriguez, Rene; Pak, Joshua J; Sun, Chivin

    2015-02-10

    Hybrid particles that comprise a coating surrounding a chalcopyrite material, the coating comprising a metal, a semiconductive material, or a polymer; a core comprising a chalcopyrite material and a shell comprising a functionalized chalcopyrite material, the shell enveloping the core; or a reaction product of a chalcopyrite material and at least one of a reagent, heat, and radiation. Methods of forming the hybrid particles are also disclosed.

  20. Hybrid superconductor magnet bearings

    SciTech Connect

    Chu, W.

    1995-04-01

    Hybrid superconductor magnet bearings (HSMB`s) utilize high temperature superconductors (HTS`s) together with permanent magnets to form a frictionless interface between relatively rotating parts. They are low mass, stable, and do not incur expenditure of energy during normal operation. There is no direct physical contact between rotor and stator, and hence there is no wear and tear. However, just as any other applications of HTS`s, it requires a very cold temperature to function. Whereas this might be perceived as a disadvantage on earth, it is of no great concern in space or on the moon. To astronomers, the moon is an excellent site for an observatory, but the cold and dusty vacuum environment on the moon precludes the use of mechanical bearings on the telescope mounts. Furthermore, drive mechanisms with very fine steps, and hence bearings with extremely low friction are needed to track a star from the moon, because the moon rotates very slowly. All aspects considered, the HSMB is about the only candidate that fits in naturally. Here, the authors present a design for one such bearing, capable of supporting a telescope that weighs about 3 lbs on Earth.

  1. Hybrid superconductor magnet bearings

    NASA Astrophysics Data System (ADS)

    Chu, Wei-Kan

    1995-04-01

    Hybrid superconductor magnet bearings (HSMB's) utilize high temperature superconductors (HTS's) together with permanent magnets to form a frictionless interface between relatively rotating parts. They are low mass, stable, and do not incur expenditure of energy during normal operation. There is no direct physical contact between rotor and stator, and hence there is no wear and tear. However, just as any other applications of HTS's, it requires a very cold temperature to function. Whereas this might be perceived as a disadvantage on earth, it is of no great concern in space or on the moon. To astronomers, the moon is an excellent site for an observatory, but the cold and dusty vacuum environment on the moon precludes the use of mechanical bearings on the telescope mounts. Furthermore, drive mechanisms with very fine steps, and hence bearings with extremely low friction are needed to track a star from the moon, because the moon rotates very slowly. All aspects considered, the HSMB is about the only candidate that fits in naturally. Here, we present a design for one such bearing, capable of supporting a telescope that weighs about 3 lbs on Earth.

  2. ADVANCED HYBRID PARTICULATE COLLECTOR

    SciTech Connect

    Stanley J. Miller; Grant L. Schelkoph; Grant E. Dunham

    2000-12-01

    A new concept in particulate control, called an advanced hybrid particulate collector (AHPC), is being developed under funding from the US Department of Energy. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in an entirely novel manner. The AHPC concept combines fabric filtration and electrostatic precipitation in the same housing, providing major synergism between the two methods, both in the particulate collection step and in transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emissions with conventional ESPs, and solves the problem of reentrainment and recollection of dust in conventional baghouses. Phase I of the development effort consisted of design, construction, and testing of a 5.7-m{sup 3}/min (200-acfm) working AHPC model. Results from both 8-hour parametric tests and 100-hour proof-of-concept tests with two different coals demonstrated excellent operability and greater than 99.99% fine-particle collection efficiency.

  3. Hybrid Power Management (HPM)

    NASA Technical Reports Server (NTRS)

    Eichenberg, Dennis J.

    2007-01-01

    The NASA Glenn Research Center s Avionics, Power and Communications Branch of the Engineering and Systems Division initiated the Hybrid Power Management (HPM) Program for the GRC Technology Transfer and Partnership Office. HPM is the innovative integration of diverse, state-of-the-art power devices in an optimal configuration for space and terrestrial applications. The appropriate application and control of the various power devices significantly improves overall system performance and efficiency. The advanced power devices include ultracapacitors and fuel cells. HPM has extremely wide potential. Applications include power generation, transportation systems, biotechnology systems, and space power systems. HPM has the potential to significantly alleviate global energy concerns, improve the environment, and stimulate the economy. One of the unique power devices being utilized by HPM for energy storage is the ultracapacitor. An ultracapacitor is an electrochemical energy storage device, which has extremely high volumetric capacitance energy due to high surface area electrodes, and very small electrode separation. Ultracapacitors are a reliable, long life, maintenance free, energy storage system. This flexible operating system can be applied to all power systems to significantly improve system efficiency, reliability, and performance. There are many existing and conceptual applications of HPM.

  4. Hybrid power source

    DOEpatents

    Singh, Harmohan N.

    2012-06-05

    A hybrid power system is comprised of a high energy density element such as a fuel-cell and high power density elements such as a supercapacitor banks. A DC/DC converter electrically connected to the fuel cell and converting the energy level of the energy supplied by the fuel cell. A first switch is electrically connected to the DC/DC converter. First and second supercapacitors are electrically connected to the first switch and a second switch. A controller is connected to the first switch and the second switch, monitoring charge levels of the supercapacitors and controls the switching in response to the charge levels. A load is electrically connected to the second switch. The first switch connects the DC/DC converter to the first supercapacitor when the second switch connects the second supercapacitor to the load. The first switch connects the DC/DC converter to the second supercapacitor when the second switch connects the first supercapacitor to the load.

  5. Hybrid superconductor magnet bearings

    NASA Technical Reports Server (NTRS)

    Chu, Wei-Kan

    1995-01-01

    Hybrid superconductor magnet bearings (HSMB's) utilize high temperature superconductors (HTS's) together with permanent magnets to form a frictionless interface between relatively rotating parts. They are low mass, stable, and do not incur expenditure of energy during normal operation. There is no direct physical contact between rotor and stator, and hence there is no wear and tear. However, just as any other applications of HTS's, it requires a very cold temperature to function. Whereas this might be perceived as a disadvantage on earth, it is of no great concern in space or on the moon. To astronomers, the moon is an excellent site for an observatory, but the cold and dusty vacuum environment on the moon precludes the use of mechanical bearings on the telescope mounts. Furthermore, drive mechanisms with very fine steps, and hence bearings with extremely low friction are needed to track a star from the moon, because the moon rotates very slowly. All aspects considered, the HSMB is about the only candidate that fits in naturally. Here, we present a design for one such bearing, capable of supporting a telescope that weighs about 3 lbs on Earth.

  6. Metallographic in situ hybridization.

    PubMed

    Powell, Richard D; Pettay, James D; Powell, William C; Roche, Patrick C; Grogan, Thomas M; Hainfeld, James F; Tubbs, Raymond R

    2007-08-01

    Metallographic methods, in which a target is visualized using a probe or antibody that deposits metal selectively at its binding site, offers many advantages for bright-field in situ hybridization (ISH) detection as well as for other labeling and detection methods. Autometallographically enhanced gold labeling procedures have demonstrated higher sensitivity than conventional enzyme chromogens. Enzyme metallography, a novel procedure in which an enzymatic probe is used to deposit metal directly from solution, has been used to develop bright-field ISH methods for HER2 gene determination in breast cancer and other biopsy specimens. It provides the highest level of sensitivity and resolution, both for visualizing endogenous gene copies in nonamplified tissues and for resolving multiple gene copies to allow copy enumeration in amplified tissues without the need for oil immersion or fluorescence optics. An automated enzyme metallography procedure, silver ISH, has been developed for use in slide-staining instruments. Metallographic staining also provides excellent results for immunohistochemistry and may be combined with other staining procedures for the simultaneous detection of more than one gene or combinations of genes and proteins. PMID:17640553

  7. Hybrid Arrays for Chemical Sensing

    NASA Astrophysics Data System (ADS)

    Kramer, Kirsten E.; Rose-Pehrsson, Susan L.; Johnson, Kevin J.; Minor, Christian P.

    In recent years, multisensory approaches to environment monitoring for chemical detection as well as other forms of situational awareness have become increasingly popular. A hybrid sensor is a multimodal system that incorporates several sensing elements and thus produces data that are multivariate in nature and may be significantly increased in complexity compared to data provided by single-sensor systems. Though a hybrid sensor is itself an array, hybrid sensors are often organized into more complex sensing systems through an assortment of network topologies. Part of the reason for the shift to hybrid sensors is due to advancements in sensor technology and computational power available for processing larger amounts of data. There is also ample evidence to support the claim that a multivariate analytical approach is generally superior to univariate measurements because it provides additional redundant and complementary information (Hall, D. L.; Linas, J., Eds., Handbook of Multisensor Data Fusion, CRC, Boca Raton, FL, 2001). However, the benefits of a multisensory approach are not automatically achieved. Interpretation of data from hybrid arrays of sensors requires the analyst to develop an application-specific methodology to optimally fuse the disparate sources of data generated by the hybrid array into useful information characterizing the sample or environment being observed. Consequently, multivariate data analysis techniques such as those employed in the field of chemometrics have become more important in analyzing sensor array data. Depending on the nature of the acquired data, a number of chemometric algorithms may prove useful in the analysis and interpretation of data from hybrid sensor arrays. It is important to note, however, that the challenges posed by the analysis of hybrid sensor array data are not unique to the field of chemical sensing. Applications in electrical and process engineering, remote sensing, medicine, and of course, artificial

  8. Fiber reinforced hybrid phenolic foam

    NASA Astrophysics Data System (ADS)

    Desai, Amit

    Hybrid composites in recent times have been developed by using more than one type of fiber reinforcement to bestow synergistic properties of the chosen filler and matrix and also facilitating the design of materials with specific properties matched to end use. However, the studies for hybrid foams have been very limited because of problems related to fiber dispersion in matrix, non uniform mixing due to presence of more than one filler and partially cured foams. An effective approach to synthesize hybrid phenolic foam has been proposed and investigated here. Hybrid composite phenolic foams were reinforced with chopped glass and aramid fibers in varied proportions. On assessing mechanical properties in compression and shear several interesting facts surfaced but overall hybrid phenolic foams exhibited a more graceful failure, greater resistance to cracking and were significantly stiffer and stronger than foams with only glass and aramid fibers. The optimum fiber ratio for the reinforced hybrid phenolic foam system was found to be 1:1 ratio of glass to aramid fibers. Also, the properties of hybrid foam were found to deviate from rule of mixture (ROM) and thus the existing theories of fiber reinforcement fell short in explaining their complex behavior. In an attempt to describe and predict mechanical behavior of hybrid foams a statistical design tool using analysis of variance technique was employed. The utilization of a statistical model for predicting foam properties was found to be an appropriate tool that affords a global perspective of the influence of process variables such as fiber weight fraction, fiber length etc. on foam properties (elastic modulus and strength). Similar approach could be extended to study other fiber composite foam systems such as polyurethane, epoxy etc. and doing so will reduce the number of experimental iterations needed to optimize foam properties and identify critical process variables. Diffusivity, accelerated aging and flammability

  9. Hybridization in a warmer world

    PubMed Central

    Chunco, Amanda J

    2014-01-01

    Climate change is profoundly affecting the evolutionary trajectory of individual species and ecological communities, in part through the creation of novel species assemblages. How climate change will influence competitive interactions has been an active area of research. Far less attention, however, has been given to altered reproductive interactions. Yet, reproductive interactions between formerly isolated species are inevitable as populations shift geographically and temporally as a result of climate change, potentially resulting in introgression, speciation, or even extinction. The susceptibility of hybridization rates to anthropogenic disturbance was first recognized in the 1930s. To date, work on anthropogenically mediated hybridization has focused primarily on either physical habitat disturbance or species invasion. Here, I review recent literature on hybridization to identify how ecological responses to climate change will increase the likelihood of hybridization via the dissolution of species barriers maintained by habitat, time, or behavior. Using this literature, I identify several cases where novel hybrid zones have recently formed, likely as a result of changing climate. Future research should focus on identifying areas and taxonomic groups where reproductive species interactions are most likely to be influenced by climate change. Furthermore, a better understanding of the evolutionary consequences of climate-mediated secondary contact is urgently needed. Paradoxically, hybridization is both a major conservation concern and an important source of novel genetic and phenotypic variation. Hybridization may therefore both contribute to increasing rates of extinction and stimulate the creation of novel phenotypes that will speed adaptation to novel climates. Predicting which result will occur following secondary contact will be an important contribution to conservation for many species. PMID:24963394

  10. Fission fusion hybrids- recent progress

    NASA Astrophysics Data System (ADS)

    Kotschenreuther, M.; Valanju, P.; Mahajan, S.; Covele, B.

    2012-03-01

    Fission-fusion hybrids enjoy unique advantages for addressing long standing societal acceptability issues of nuclear fission power, and can do this at a much lower level of technical development than a competitive fusion power plant- so it could be a nearer term application. For waste incineration, hybrids can burn intransigent transuranic residues (with the long lived biohazard) from light water reactors (LWRs) with far fewer hybrid reactors than a comparable system within the realm of fission alone. For fuel production, hybrids can produce fuel for ˜4 times as many LWRs with NO fuel reprocessing. For both waste incineration or fuel production, the most severe kind of nuclear accident- runaway criticality- can be excluded, unlike either fast reactors or typical accelerator based reactors. The proliferation risks for hybrid fuel production are, we strongly believe, far less than any other fuel production method, including today's gas centrifuges. US Thorium reserves could supply the entire US electricity supply for centuries. The centerpiece of the fuel cycle is a high power density Compact Fusion Neutron Source (major+minor radius ˜ 2.5-3.5 m), which is made feasible by the super-X divertor.

  11. Hybrid metrology implementation: server approach

    NASA Astrophysics Data System (ADS)

    Osorio, Carmen; Timoney, Padraig; Vaid, Alok; Elia, Alex; Kang, Charles; Bozdog, Cornel; Yellai, Naren; Grubner, Eyal; Ikegami, Toru; Ikeno, Masahiko

    2015-03-01

    Hybrid metrology (HM) is the practice of combining measurements from multiple toolset types in order to enable or improve metrology for advanced structures. HM is implemented in two phases: Phase-1 includes readiness of the infrastructure to transfer processed data from the first toolset to the second. Phase-2 infrastructure allows simultaneous transfer and optimization of raw data between toolsets such as spectra, images, traces - co-optimization. We discuss the extension of Phase-1 to include direct high-bandwidth communication between toolsets using a hybrid server, enabling seamless fab deployment and further laying the groundwork for Phase-2 high volume manufacturing (HVM) implementation. An example of the communication protocol shows the information that can be used by the hybrid server, differentiating its capabilities from that of a host-based approach. We demonstrate qualification and production implementation of the hybrid server approach using CD-SEM and OCD toolsets for complex 20nm and 14nm applications. Finally we discuss the roadmap for Phase-2 HM implementation through use of the hybrid server.

  12. Intercalated hybrid graphite fiber composite

    NASA Technical Reports Server (NTRS)

    Gaier, James R. (Inventor)

    1993-01-01

    The invention is directed to a highly conductive lightweight hybrid material and methods of producing the same. The hybrid composite is obtained by weaving strands of a high strength carbon or graphite fiber into a fabric-like structure, depositing a layer of carbon onto the structure, heat treating the structure to graphitize the carbon layer, and intercalating the graphitic carbon layer structure. A laminate composite material useful for protection against lightning strikes comprises at least one layer of the hybrid material over at least one layer of high strength carbon or graphite fibers. The composite material of the present invention is compatible with matrix compounds, has a coefficient of thermal expansion which is the same as underlying fiber layers, and is resistant to galvanic corrosion in addition to being highly conductive. These materials are useful in the aerospace industry, in particular as lightning strike protection for airplanes.

  13. Additive Manufacturing of Hybrid Circuits

    NASA Astrophysics Data System (ADS)

    Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David; Hirschfeld, Deidre; Hall, Aaron C.; Bell, Nelson S.

    2016-07-01

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. Finally, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  14. Genomic Networks of Hybrid Sterility

    PubMed Central

    Turner, Leslie M.; White, Michael A.; Tautz, Diethard; Payseur, Bret A.

    2014-01-01

    Hybrid dysfunction, a common feature of reproductive barriers between species, is often caused by negative epistasis between loci (“Dobzhansky-Muller incompatibilities”). The nature and complexity of hybrid incompatibilities remain poorly understood because identifying interacting loci that affect complex phenotypes is difficult. With subspecies in the early stages of speciation, an array of genetic tools, and detailed knowledge of reproductive biology, house mice (Mus musculus) provide a model system for dissecting hybrid incompatibilities. Male hybrids between M. musculus subspecies often show reduced fertility. Previous studies identified loci and several X chromosome-autosome interactions that contribute to sterility. To characterize the genetic basis of hybrid sterility in detail, we used a systems genetics approach, integrating mapping of gene expression traits with sterility phenotypes and QTL. We measured genome-wide testis expression in 305 male F2s from a cross between wild-derived inbred strains of M. musculus musculus and M. m. domesticus. We identified several thousand cis- and trans-acting QTL contributing to expression variation (eQTL). Many trans eQTL cluster into eleven ‘hotspots,’ seven of which co-localize with QTL for sterility phenotypes identified in the cross. The number and clustering of trans eQTL—but not cis eQTL—were substantially lower when mapping was restricted to a ‘fertile’ subset of mice, providing evidence that trans eQTL hotspots are related to sterility. Functional annotation of transcripts with eQTL provides insights into the biological processes disrupted by sterility loci and guides prioritization of candidate genes. Using a conditional mapping approach, we identified eQTL dependent on interactions between loci, revealing a complex system of epistasis. Our results illuminate established patterns, including the role of the X chromosome in hybrid sterility. The integrated mapping approach we employed is

  15. Helping HAN for hybrid rockets

    NASA Astrophysics Data System (ADS)

    Ramohalli, Kumar; Dowler, Warren

    1995-01-01

    Hydroxyl amine nitrate (HAN) is a powerful oxidizer for hybrid rocket flight motors. Miscible with water up to 95% by mass, it also has high density and has been extensively characterized for materials compatibility, safety, transportation, storage and handling. Before any serious attempt to use the proposed oxidizer in hybrids, though, the usual performance figures must first be obtained. The simplest are time-independent, equilibrium rocket performance numbers that include chamber temperature, temperature at the nozzle throat, and key species in the exhaust. These numbers must be followed by several other important performance evaluation, including burning rates, pressure dependence, susceptibility to instabilities and temperature sensitivity.

  16. Charge-qubit-atom hybrid

    NASA Astrophysics Data System (ADS)

    Yu, Deshui; Valado, María Martínez; Hufnagel, Christoph; Kwek, Leong Chuan; Amico, Luigi; Dumke, Rainer

    2016-04-01

    We investigate a hybrid system of a superconducting charge qubit interacting directly with a single neutral atom via electric dipole coupling. Interfacing of the macroscopic superconducting circuit with the microscopic atomic system is accomplished by varying the gate capacitance of the charge qubit. To achieve a strong interaction, we employ two Rydberg states with an electric-dipole-allowed transition, which alters the polarizability of the dielectric medium of the gate capacitor. Sweeping the gate voltage with different rates leads to a precise control of hybrid quantum states. Furthermore, we show a possible implementation of a universal two-qubit gate.

  17. PSEUDOVECTOR MESONS, HYBRIDS AND GLUEBALLS

    SciTech Connect

    L. BURAKOVSKY; P. PAGE

    2000-06-01

    The authors consider glueball-(hybrid) meson mixing for the low-lying four pseudovector states. The h{sub 1}{prime}(1380) decays dominantly to K*K with some presence in {rho}{pi} and {omega}{eta}. The newly observed h{sub 1}(1600) has a D- to S-wave width ratio to {omega}{eta} which makes its interpretation as a conventional meson unlikely. They predict the decay pattern of the isopartner conventional or hybrid meson b{sub 1}(1650). A notably narrow s{bar s} partner h{sub 1}{prime}(1810) is predicted.

  18. Heavy gravitino in hybrid inflation

    SciTech Connect

    Kawasaki, Masahiro; Kitajima, Naoya; Nakayama, Kazunori; Yanagida, Tsutomu T. E-mail: nk610@icrr.u-tokyo.ac.jp E-mail: tsutomu.tyanagida@ipmu.jp

    2013-06-01

    It is known that supersymmetric hybrid inflation model may require severe tunings on the initial condition for large gravitino mass of order 100 - 1000 TeV due to the constant term in the superpotential. We propose a modified hybrid inflation model, where the constant term is suppressed during inflation and generated after inflation by replacing a constant term with dynamical field. In this modified model, successful inflation consistent with large gravitino mass takes place without severe tunings on the initial condition. Constraint from cosmic strings is also relaxed.

  19. Hybrid biotic/abiotic nanofactory

    NASA Astrophysics Data System (ADS)

    Choi, H.-J.; Montemagno, C. D.

    2006-03-01

    In vitro biochemical synthesis is considered a major challenge in replicating cellular functions in engineered systems. Presented is the first nanosized hybrid factory where biochemical reactions take place resulting in the production of biomolecules. A cellular ATP synthesis process is reconstructed in vitro within a bubble architecture using engineered artificial organelles. This is the first introduction of biochemical synthesis from a multiprotein polymersome system and the demonstration of complex proteins' stable functionality in an artificial structure. This hybrid system is expected to have wide application in a number of fields ranging from the in vitro investigation of cellular metabolism to the synthesis of a new class of functional materials.

  20. Optical Hybrid Quantum Information Processing

    NASA Astrophysics Data System (ADS)

    Takeda, Shuntaro; Furusawa, Akira

    Historically, two complementary approaches to optical quantum information processing have been pursued: qubits and continuous-variables, each exploiting either particle or wave nature of light. However, both approaches have pros and cons. In recent years, there has been a significant progress in combining both approaches with a view to realizing hybrid protocols that overcome the current limitations. In this chapter, we first review the development of the two approaches with a special focus on quantum teleportation and its applications. We then introduce our recent research progress in realizing quantum teleportation by a hybrid scheme, and mention its future applications to universal and fault-tolerant quantum information processing.

  1. Hybrid combustion with metallized fuels

    NASA Technical Reports Server (NTRS)

    Yi, Jianwen; Wygle, Brian S.; Bates, Ronald W.; Jones, Michael D.; Ramohalli, Kumar

    1993-01-01

    A chemical method of adding certain catalysts to improve the degradation process of a solid fuel is discussed. Thermogravimetric (TGA) analysis used to study the fundamental degradation behavior of a typical hybrid fuel (HTPB) shows that high surface temperatures increase the degradation rate. Fuels were tested in a laboratory-scale experimental hybrid rocket and their behavior was compared to a baseline behavior of HTPB fuel regression rates. It was found that a small amount of metal powder added to the fuel can significantly increase the regression rates.

  2. Anisotropic flow in transport + hydrodynamics hybrid approaches

    NASA Astrophysics Data System (ADS)

    Petersen, Hannah

    2014-12-01

    This contribution to the focus issue covers anisotropic flow in hybrid approaches. The historical development of hybrid approaches and their impact on the interpretation of flow measurements is reviewed. The major ingredients of a hybrid approach and the transition criteria between transport and hydrodynamics are discussed. The results for anisotropic flow in (event-by-event) hybrid approaches are presented. Some hybrid approaches rely on hadronic transport for the late stages for the reaction (so called afterburner) and others employ transport approaches for the early non-equilibrium evolution. In addition, there are ‘full’ hybrid calculations where a fluid evolution is dynamically embedded in a transport simulation. After demonstrating the success of hybrid approaches at high Relativistic Heavy Ion Collider and Large Hadron Collider energies, existing hybrid caluclations for collective flow observables at lower beam energies are discussed and remaining challenges outlined.

  3. Hybrid power management system and method

    NASA Technical Reports Server (NTRS)

    Eichenberg, Dennis J. (Inventor)

    2007-01-01

    A system and method for hybrid power management. The system includes photovoltaic cells, ultracapacitors, and pulse generators. In one embodiment, the hybrid power management system is used to provide power for a highway safety flasher.

  4. Hybrid Power Management System and Method

    NASA Technical Reports Server (NTRS)

    Eichenberg, Dennis J. (Inventor)

    2008-01-01

    A system and method for hybrid power management. The system includes photovoltaic cells, ultracapacitors, and pulse generators. In one embodiment, the hybrid power management system is used to provide power for a highway safety flasher.

  5. Field errors in hybrid insertion devices

    SciTech Connect

    Schlueter, R.D.

    1995-02-01

    Hybrid magnet theory as applied to the error analyses used in the design of Advanced Light Source (ALS) insertion devices is reviewed. Sources of field errors in hybrid insertion devices are discussed.

  6. High Temperature Hybrid Elastomers

    NASA Astrophysics Data System (ADS)

    Drake, Kerry Anthony

    Conventional high temperature elastomers are produced by chain polymerization of olefinic or fluorinated olefinic monomers. Ultimate thermal stabilities are limited by backbone bond strengths, lower thermal stability of cross-link sites relative to backbone bonds, and depolymerization or "unzipping" at high temperatures. In order to develop elastomers with enhanced thermal stability, hybrid thermally cross-linkable polymers that consisted only of organic-inorganic and aromatic bonds were synthesized and evaluated. The addition of phenylethynyl or phenylacetylinic functional groups to these polymers resulted in conversion of the polymers into high temperature elastomers when cross-linked by thermal curing. Polyphenyoxydiphenylsilanes were synthesized via several different condensation reactions. Results of these synthetic reactions, which utilized both hydroquinone and biphenol as monomers, were systematically evaluated to determine the optimal synthetic conditions for subsequent endcapping reactions. It was determined that dichlorodiphenylsilane condensations with biphenol in toluene or THF were best suited for this work. Use of excess dichlorodiphenylsilane yielded polymers of appropriate molecular weights with terminal reactive chlorosilane groups that could be utilized for coupling with phenylethynyl reagents in a subsequent reaction. Two new synthetic routes were developed to endcap biphenoxysilanes with ethynyl containing substituents, to yield polymers with cross-linkable end groups. Endcapping by lithiumphenylacetylide and 4[(4-fluorophenylethynyl))phenol yielded two new polymers that could be thermally cross-linked on heating above 300 °C. Successful endcapping was verified chemically by 13C NMR, FTIR and Raman analysis. Exothermic peaks consistent with ethynyl curing reactions were observed in endcapped polymers by DSC. A new diacetylinic polymer was prepared through reaction of 4,4'-buta-1,3-diyne-1,4-diyldiphenol and dichlorodiphenylsilane. This

  7. Actuated Hybrid Mirror Telescope

    NASA Technical Reports Server (NTRS)

    Hickey, Gregory; Redding, David; Lowman, Andrew; Cohen, David; Ohara, Catherine

    2005-01-01

    The figure depicts the planned Actuated Hybrid Mirror Telescope (AHMT), which is intended to demonstrate a new approach to the design and construction of wide-aperture spaceborne telescopes for astronomy and Earth science. This technology is also appropriate for Earth-based telescopes. The new approach can be broadly summarized as using advanced lightweight mirrors that can be manufactured rapidly at relatively low cost. More specifically, it is planned to use precise replicated metallic nanolaminate mirrors to obtain the required high-quality optical finishes. Lightweight, dimensionally stable silicon carbide (SiC) structures will support the nanolaminate mirrors in the required surface figures. To enable diffraction- limited telescope performance, errors in surface figures will be corrected by use of mirror-shape-control actuators that will be energized, as needed, by a wave-front-sensing and control system. The concepts of nanolaminate materials and mirrors made from nanolaminate materials were discussed in several previous NASA Tech Briefs articles. Nanolaminates constitute a relatively new class of materials that can approach theoretical limits of stiffness and strength. Nanolaminate mirrors are synthesized by magnetron sputter deposition of metallic alloys and/or compounds on optically precise master surfaces to obtain optical-quality reflector surfaces backed by thin shell structures. As an integral part of the deposition process, a layer of gold that will constitute the reflective surface layer is deposited first, eliminating the need for a subsequent and separate reflective-coating process. The crystallographic textures of the nanolaminate will be controlled to optimize the performance of the mirror. The entire deposition process for making a nanolaminate mirror takes less than 100 hours, regardless of the mirror diameter. Each nanolaminate mirror will be bonded to its lightweight SiC supporting structure. The lightweight nanolaminate mirrors and Si

  8. ADVANCED HYBRID PARTICULATE COLLECTOR

    SciTech Connect

    Ye Zhuang; Stanley J. Miller; Michelle R. Olderbak; Rich Gebert

    2001-12-01

    A new concept in particulate control, called an advanced hybrid particulate collector (AHPC), is being developed under funding from the U.S. Department of Energy. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in an entirely novel manner. The AHPC concept combines fabric filtration and electrostatic precipitation in the same housing, providing major synergism between the two methods, both in the particulate collection step and in transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emissions with conventional ESPs, and solves the problem of reentrainment and re-collection of dust in conventional baghouses. Phase I of the development effort consisted of design, construction, and testing of a 5.7-m{sup 3}/min (200-acfm) working AHPC model. Results from both 8-hr parametric tests and 100-hr proof-of-concept tests with two different coals demonstrated excellent operability and greater than 99.99% fine-particle collection efficiency. Since all of the developmental goals of Phase I were met, the approach was scaled up in Phase II to a size of 255 m{sup 3}/min (9000 acfm) (equivalent in size to 2.5 MW) and was installed on a slipstream at the Big Stone Power Plant. For Phase II, the AHPC at Big Stone Power Plant was operated continuously from late July 1999 until mid-December 1999. The Phase II results were highly successful in that ultrahigh particle collection efficiency was achieved, pressure drop was well controlled, and system operability was excellent. For Phase III, the AHPC was modified into a more compact configuration, and components were installed that were closer to what would be used in a full-scale commercial design. The modified AHPC was operated from April to July 2000. While operational results were acceptable during this time, inspection of bags in the summer of 2000 revealed some membrane damage to the fabric that appeared to be

  9. Hybrid quantum information processing

    NASA Astrophysics Data System (ADS)

    Furusawa, Akira

    2013-03-01

    the other hand, the fidelity of CV QIP is not so high because perfect fidelity needs infinite energy, which comes from the infinite dimensionality of CV QIP. To overcome the difficulty, ``hybrid'' approach is proposed. In this approach, qubits are used as inputs for CV QIP. It is possible because qubits can be regarded as a special case of CVs. So, we can circumvent the infinite dimensionality problem of CV QIP by using qubits as the inputs. The basic example is qubit teleportation with a CV teleporter, where the qubit is a so-called ``dual-rail'' qubit with a single photon; c0 | 1 , 0 > +c1 | 0 , 1 > . We recently succeeded in creating time-bin qubits with single photons, and now we are working on the teleportation experiment with the technology developed for teleportation of highly nonclassical wave packets of light.

  10. The Hybrid Automobile and the Atkinson Cycle

    ERIC Educational Resources Information Center

    Feldman, Bernard J.

    2008-01-01

    The hybrid automobile is a strikingly new automobile technology with a number of new technological features that dramatically improve energy efficiency. This paper will briefly describe how hybrid automobiles work; what are these new technological features; why the Toyota Prius hybrid internal combustion engine operates on the Atkinson cycle…

  11. Sativa by falcata alfalfa hybrid variety trials

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Previous research has demonstrated that alfalfa (Medicago sativa L.) subsp. sativa by subsp. falcata hybrids showed heterosis. Limited work has been done examining these hybrids in a sward situation. The objective of this study was to produce sativa by falcata hybrids using Dairyland Seed Company’...

  12. Hybrid Doctoral Program: Innovative Practices and Partnerships

    ERIC Educational Resources Information Center

    Alvich, Dori; Manning, JoAnn; McCormick, Kathy; Campbell, Robert

    2012-01-01

    This paper reflects on how one mid-Atlantic University innovatively incorporated technology into the development of a hybrid doctoral program in educational leadership. The paper describes a hybrid doctoral degree program using a rigorous design; challenges of reworking a traditional syllabus of record to a hybrid doctoral program; the perceptions…

  13. Hybrid Computation at Louisiana State University.

    ERIC Educational Resources Information Center

    Corripio, Armando B.

    Hybrid computation facilities have been in operation at Louisiana State University since the spring of 1969. In part, they consist of an Electronics Associates, Inc. (EAI) Model 680 analog computer, an EAI Model 693 interface, and a Xerox Data Systems (XDS) Sigma 5 digital computer. The hybrid laboratory is used in a course on hybrid computation…

  14. Hybrid Cars Now, Fuel Cell Cars Later

    NASA Astrophysics Data System (ADS)

    Demirdöven, Nurettin; Deutch, John

    2004-08-01

    We compare the energy efficiency of hybrid and fuel cell vehicles as well as conventional internal combustion engines. Our analysis indicates that fuel cell vehicles using hydrogen from fossil fuels offer no significant energy efficiency advantage over hybrid vehicles operating in an urban drive cycle. We conclude that priority should be placed on hybrid vehicles by industry and government.

  15. 40 CFR 1036.525 - Hybrid engines.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... in CO2 emissions resulting from the power take-off operation as described in 40 CFR 1037.525. Use..., the rechargeable energy storage system (RESS) and the power electronics between the hybrid electric... part and/or 40 CFR part 1065. If you test hybrid engines using the SET, deactivate the hybrid...

  16. Using Hybrid Modeling to Develop Innovative Activities

    ERIC Educational Resources Information Center

    Lichtman, Brenda; Avans, Diana

    2005-01-01

    This article describes a hybrid activities model that physical educators can use with students in grades four and above to create virtually a limitless array of novel games. A brief introduction to the basic theory is followed by descriptions of some hybrid games. Hybrid games are typically the result of merging two traditional sports or other…

  17. 1997 hybrid electric vehicle specifications

    SciTech Connect

    Sluder, S.; Larsen, R.; Duoba, M.

    1996-10-01

    The US DOE sponsors Advanced Vehicle Technology competitions to help educate the public and advance new vehicle technologies. For several years, DOE has provided financial and technical support for the American Tour de Sol. This event showcases electric and hybrid electric vehicles in a road rally across portions of the northeastern United States. The specifications contained in this technical memorandum apply to vehicles that will be entered in the 1997 American Tour de Sol. However, the specifications were prepared to be general enough for use by other teams and individuals interested in developing hybrid electric vehicles. The purpose of the specifications is to ensure that the vehicles developed do not present a safety hazard to the teams that build and drive them or to the judges, sponsors, or public who attend the competitions. The specifications are by no means the definitive sources of information on constructing hybrid electric vehicles - as electric and hybrid vehicles technologies advance, so will the standards and practices for their construction. In some cases, the new standards and practices will make portions of these specifications obsolete.

  18. Hybrid origin of Audubon's warbler.

    PubMed

    Brelsford, Alan; Milá, Borja; Irwin, Darren E

    2011-06-01

    Several animal species have recently been shown to have hybrid origins, but no avian examples have been documented with molecular evidence. We investigate whether the Audubon's warbler (Dendroica auduboni), one of four visually distinct species in the yellow-rumped warbler complex, has originated through hybridization between two other species in this group, the myrtle warbler (D. coronata) and black-fronted warbler (D. nigrifrons). Analysis of nuclear amplified fragment length polymorphism (AFLP) and sequence markers shows that Audubon's warblers are genetically intermediate and carry a mixture of alleles otherwise found only in one or the other of their putative parental species. Audubon's warblers also carry two deeply divergent mitochondrial DNA lineages, each shared with only one putative parental form. Broad clines between Audubon's and black-fronted warblers in AFLP markers call into question the validity of these two forms as full species; nevertheless, our results suggest that the Audubon's warbler probably originated through hybridization between two long-diverged species. It is likely that more cases of avian species of hybrid origin will be revealed by surveys of variation in nuclear DNA and other traits. PMID:21435063

  19. Mandible shape in hybrid mice.

    PubMed

    Renaud, Sabrina; Alibert, Paul; Auffray, Jean-Christophe

    2009-09-01

    Hybridisation between closely related species is frequently seen as retarding evolutionary divergence and can also promote it by creating novel phenotypes due to new genetic combinations and developmental interactions. We therefore investigated how hybridisation affects the shape of the mouse mandible, a well-known feature in evo-devo studies. Parental groups corresponded to two strains of the European mouse sub-species Mus musculus domesticus and Mus musculus musculus. Parents and hybrids were bred in controlled conditions. The mandibles of F(1) hybrids are mostly intermediate between parental phenotypes as expected for a complex multigenic character. Nevertheless, a transgressive effect as well as an increased phenotypic variance characterise the hybrids. This suggests that hybridisation between the two subspecies could lead to a higher phenotypic variance due to complex interactions among the parental genomes including non-additive genetic effects. The major direction of variance is conserved, however, among hybrids and parent groups. Hybridisation may thus play a role in the production of original transgressive phenotypes occurring following pre-existing patterns of variance. PMID:19504055

  20. Magneto-Acoustic Hybrid Nanomotor.

    PubMed

    Li, Jinxing; Li, Tianlong; Xu, Tailin; Kiristi, Melek; Liu, Wenjuan; Wu, Zhiguang; Wang, Joseph

    2015-07-01

    Efficient and controlled nanoscale propulsion in harsh environments requires careful design and manufacturing of nanomachines, which can harvest and translate the propelling forces with high spatial and time resolution. Here we report a new class of artificial nanomachine, named magneto-acoustic hybrid nanomotor, which displays efficient propulsion in the presence of either magnetic or acoustic fields without adding any chemical fuel. These fuel-free hybrid nanomotors, which comprise a magnetic helical structure and a concave nanorod end, are synthesized using a template-assisted electrochemical deposition process followed by segment-selective chemical etching. Dynamic switching of the propulsion mode with reversal of the movement direction and digital speed regulation are demonstrated on a single nanovehicle. These hybrid nanomotors exhibit a diverse biomimetic collective behavior, including stable aggregation, swarm motion, and swarm vortex, triggered in response to different field inputs. Such adaptive hybrid operation and controlled collective behavior hold considerable promise for designing smart nanovehicles that autonomously reconfigure their operation mode according to their mission or in response to changes in their surrounding environment or in their own performance, thus holding considerable promise for diverse practical biomedical applications of fuel-free nanomachines. PMID:26077325

  1. Intensive production of hybrid catfish

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Economic analysis by others shows clearly that under certain fish price-feed price combinations, intensively aerated ponds are not only an alternative, but are the profit-maximizing technology. We have raised hybrid catfish at stocking rates of 20,000/acre with aeration rates up to 10 hp/acre, produ...

  2. The threat of hybrid Phytophthoras

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The majority of invasive plant pathogens have resulted from the introduction of exotic organisms. However, another mechanism for invasiveness results from hybridization between species. This phenomenon has been documented in plants and animals, but its role in plant pathology has only recently been ...

  3. Expanding discourse repertoires with hybridity

    NASA Astrophysics Data System (ADS)

    Kelly, Gregory J.

    2012-09-01

    In "Hybrid discourse practice and science learning" Kamberelis and Wehunt present a theoretically rich argument about the potential of hybrid discourses for science learning. These discourses draw from different forms of "talk, social practice, and material practices" to create interactions that are "intertextually complex" and "interactionally dynamic." The hybrid discourse practices are described as involving the dynamic interplay of at least three key elements: "the lamination of multiple cultural frames, the shifting relations between people and their discourse, and the shifting power relations between and among people." Each of these elements requires a respective unit of analysis and are often mutually reinforcing. The authors present a theoretically cogent argument for the study of hybrid discourse practices and identify the potential such discourses may have for science education. This theoretical development leads to an analysis of spoken and written discourse around a set of educational events concerning the investigation of owl pellets by two fifth grade students, their classmates, and teacher. Two discourse segments are presented and analyzed by the authors in detail. The first is a discourse analysis of the dissection of the owl pellet by two students, Kyle and Max. The second analysis examines the science report of these same two students. In this article, I pose a number of questions about the study with the hope that by doing so I expand the conversation around the insightful analysis presented.

  4. Hybrid origins of cultivated potatoes

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Wild and cultivated potatoes, Solanum section Petota, is taxonomically difficult, partly because of interspecific hybridization at both the diploid and polyploid levels. The taxonomy of cultivated potatoes is particularly controversial. With DNA sequence data of the GBSSI (waxy) gene we here infer r...

  5. Hybrid temperature-monitoring circuit

    NASA Technical Reports Server (NTRS)

    Rinard, G. A.; Steffen, D. A.; Sturm, R. E.

    1979-01-01

    Hybrid circuit developed for use in hand-held vital signs monitor converts resistance of thermistor probe to 3 1/2 digit BCD (binary-coded-decimal) temperature readout. If used alone circuit can form 'stand alone' temperature monitor or can transmit temperature data via telemetry to data acquisition systems.

  6. Widely tunable hybrid semiconductor lasers

    NASA Astrophysics Data System (ADS)

    Koh, Ping-Chiek; Plumb, Richard G. S.

    1999-04-01

    A new hybrid design tunable semiconductor laser, with a wide tuning range, a narrow linewidth, simple tuning/control algorithms, low variations in output power across its tuning range and simple fabrication, is introduced. This hybrid laser consists of a large spot reflective amplifier (LS-RA) coupled to a Lithium Niobate Acousto-Optic Filter (AOF), giving wavelength selective feedback. The LS-RA waveguide is angled by 10 degrees to the coupling facet, but is normal to the other facet, giving reflectivities of 5 X 10-5 and 3 X 10-1 respectively. This amplifier structure allows maximum coupling to the AOF without stringent alignment tolerance. THe AOF consists of a 2-stage acoustic TE/TM converter with a high TE reflectivity coating at the end. A propagating surface acoustic wave is employed to phase-match the TE and TM modes of a specific wavelength, achieving a narrow-band feedback into the LS-RA. Output power and wavelength of the hybrid laser are controlled by the LS-RA current and RF drive frequency of the AOF respectively. Simulations using a Time-Domain Model and initial experiments have shown that the hybrid laser have a wide tuning range, narrow linewidth, SMSR >= 30 dB and low power variations across its tuning range.

  7. Hybrid respiration-signal conditioner

    NASA Technical Reports Server (NTRS)

    Rinard, G. A.; Steffen, D. A.; Sturm, R. E.

    1979-01-01

    Hybrid impedance-pneumograph and respiration-rate signal conditioner element of hand-held vital signs monitor measures changes in impedance of chest during breathing cycle and generates analog respiration signal as output along with synchronous square wave that can be monitored by breath-rate processor.

  8. Models for asymmetric hybrid brane

    NASA Astrophysics Data System (ADS)

    Bazeia, D.; Marques, M. A.; Menezes, R.

    2015-10-01

    We deal with relativistic models described by a single real scalar field, searching for topological structures that behave asymmetrically, connecting minima with a distinct profile. We use such features to build a new braneworld scenario, in which the source scalar field contributes to generate asymmetric hybrid brane.

  9. Iterative framework radiation hybrid mapping

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Building comprehensive radiation hybrid maps for large sets of markers is a computationally expensive process, since the basic mapping problem is equivalent to the traveling salesman problem. The mapping problem is also susceptible to noise, and as a result, it is often beneficial to remove markers ...

  10. Photocarcinogenesis in Xiphophorus hybrid models.

    PubMed

    Mitchell, David L; Nairn, Rodney S

    2006-01-01

    The poeciliid fish genus Xiphophorus provides important models for investigating the etiology and genetics of sunlight-induced melanoma. Interspecific hybrids generated among platyfish and swordtails have been used as genetic tumor models, particularly for cutaneous malignant melanoma (CMM), for more than 6 decades. Oncogene and tumor suppressor gene involvement in a variety of spontaneous and carcinogen-induced tumors has been and continues to be extensively studied. Select hybrids develop melanoma spontaneously or after acute or chronic exposure to ultraviolet radiation. Many scientists believe that the etiology of CMM and particularly its initiation is different from other types of sunlight-induced skin cancers, and may involve free radical chemistry rather than the direct absorption of UVB by DNA. Xiphophorus offers a unique platform to scrutinize this question and determine the types of DNA damage that are involved, the solar wavelength ranges that are important, and the role of DNA repair genes in early tumorigenesis. The diverse photochemical and photobiological responses observed in the different Xiphophorus species and interspecies hybrids suggest that heritable traits governing DNA damage induction and repair may be involved in the susceptibility of Xiphophorus hybrids to melanomagenesis. PMID:18377212

  11. Transient combustion in hybrid rockets

    NASA Astrophysics Data System (ADS)

    Karabeyoglu, Mustafa Arif

    1998-09-01

    Hybrid rockets regained interest recently as an alternative chemical propulsion system due to their advantages over the solid and liquid systems that are currently in use. Development efforts on hybrids revealed two important problem areas: (1) low frequency instabilities and (2) slow transient response. Both of these are closely related to the transient behavior which is a poorly understood aspect of hybrid operation. This thesis is mainly involved with a theoretical study of transient combustion in hybrid rockets. We follow the methodology of identifying and modeling the subsystems of the motor such as the thermal lags in the solid, boundary layer combustion and chamber gasdynamics from a dynamic point of view. We begin with the thermal lag in the solid which yield the regression rate for any given wall heat flux variation. Interesting phenomena such as overshooting during throttling and the amplification and phase lead regions in the frequency domain are discovered. Later we develop a quasi-steady transient hybrid combustion model supported with time delays for the boundary layer processes. This is integrated with the thermal lag system to obtain the thermal combustion (TC) coupled response. The TC coupled system with positive delays generated low frequency instabilities. The scaling of the instabilities are in good agreement with actual motor test data. Finally, we formulate a gasdynamic model for the hybrid chamber which successfully resolves the filling/emptying and longitudinal acoustic behavior of the motor. The TC coupled system is later integrated to the gasdynamic model to obtain the overall response (TCG coupled system) of gaseous oxidizer motors with stiff feed systems. Low frequency instabilities were also encountered for the TCG coupled system. Apart from the transient investigations, the regression rate behavior of liquefying hybrid propellants such as solid cryogenic materials are also studied. The theory is based on the possibility of enhancement

  12. Shape Memory Composite Hybrid Hinge

    NASA Technical Reports Server (NTRS)

    Fang, Houfei; Im, Eastwood; Lin, John; Scarborough, Stephen

    2012-01-01

    There are two conventional types of hinges for in-space deployment applications. The first type is mechanically deploying hinges. A typical mechanically deploying hinge is usually composed of several tens of components. It is complicated, heavy, and bulky. More components imply higher deployment failure probability. Due to the existence of relatively moving components among a mechanically deploying hinge, it unavoidably has microdynamic problems. The second type of conventional hinge relies on strain energy for deployment. A tape-spring hinge is a typical strain energy hinge. A fundamental problem of a strain energy hinge is that its deployment dynamic is uncontrollable. Usually, its deployment is associated with a large impact, which is unacceptable for many space applications. Some damping technologies have been experimented with to reduce the impact, but they increased the risks of an unsuccessful deployment. Coalescing strain energy components with shape memory composite (SMC) components to form a hybrid hinge is the solution. SMCs are well suited for deployable structures. A SMC is created from a high-performance fiber and a shape memory polymer resin. When the resin is heated to above its glass transition temperature, the composite becomes flexible and can be folded or packed. Once cooled to below the glass transition temperature, the composite remains in the packed state. When the structure is ready to be deployed, the SMC component is reheated to above the glass transition temperature, and it returns to its as-fabricated shape. A hybrid hinge is composed of two strain energy flanges (also called tape-springs) and one SMC tube. Two folding lines are placed on the SMC tube to avoid excessive strain on the SMC during folding. Two adapters are used to connect the hybrid hinge to its adjacent structural components. While the SMC tube is heated to above its glass transition temperature, a hybrid hinge can be folded and stays at folded status after the temperature

  13. A hybrid air conditioner driven by a hybrid solar collector

    NASA Astrophysics Data System (ADS)

    Al-Alili, Ali

    The objective of this thesis is to search for an efficient way of utilizing solar energy in air conditioning applications. The current solar Air Conditioners (A/C)s suffer from low Coefficient of Performance (COP) and performance degradation in hot and humid climates. By investigating the possible ways of utilizing solar energy in air conditioning applications, the bottlenecks in these approaches were identified. That resulted in proposing a novel system whose subsystem synergy led to a COP higher than unity. The proposed system was found to maintain indoor comfort at a higher COP compared to the most common solar A/Cs, especially under very hot and humid climate conditions. The novelty of the proposed A/C is to use a concentrating photovoltaic/thermal collector, which outputs thermal and electrical energy simultaneously, to drive a hybrid A/C. The performance of the hybrid A/C, which consists of a desiccant wheel, an enthalpy wheel, and a vapor compression cycle (VCC), was investigated experimentally. This work also explored the use of a new type of desiccant material, which can be regenerated with a low temperature heat source. The experimental results showed that the hybrid A/C is more effective than the standalone VCC in maintaining the indoor conditions within the comfort zone. Using the experimental data, the COP of the hybrid A/C driven by a hybrid solar collector was found to be at least double that of the current solar A/Cs. The innovative integration of its subsystems allows each subsystem to do what it can do best. That leads to lower energy consumption which helps reduce the peak electrical loads on electric utilities and reduces the consumer operating cost since less energy is purchased during the on peak periods and less solar collector area is needed. In order for the proposed A/C to become a real alternative to conventional systems, its performance and total cost were optimized using the experimentally validated model. The results showed that for an

  14. Bounded hybrid superiority in an avian hybrid zone: effects of mate, diet, and habitat choice.

    PubMed

    Good, T P; Ellis, J C; Annett, C A; Pierotti, R

    2000-10-01

    There has been considerable debate in the study of hybrid zones as to whether hybrids may be superior to parental types within the area of contact (bounded hybrid superiority). In birds, naturally occurring hybridization is relatively common, and hybridization within this group always involves mate choice. If hybrids are superior, females choosing heterospecific mates should be expected to show higher fitness under the conditions prevalent in the hybrid zone. Hybrid superiority under these circumstances would reduce reinforcement and thereby help to maintain the hybrid zone. To examine this issue, we studied reproductive performances of hybrids and parental species of gulls (Larus occidentalis and Larus glaucescens) at two colonies within a linear hybrid zone along the west coast of the United States. This hybrid zone contains predominantly gulls of intermediate phenotype. Previous studies indicated that hybrids were superior to one or both parental types, but provided no data on possible mechanisms that underlie this hybrid superiority. Using a hybrid index designed specifically for these species, we identified to phenotype more than 300 individuals associated with nests, including both individual males and females within 73 pairs in the central portion of the hybrid zone and 74 pairs in the northern portion of the hybrid zone. There was little evidence of assortative mating, and what little there was resulted solely because of pairings within intergrades. In the central hybrid zone, females paired with hybrid males produced larger clutches and hatched and fledged more chicks compared with females paired to western gull males. This was a result of heavy predation on eggs in sand habitat, where male western gulls established territories. In contrast, many hybrid males established territories in vegetated cover that was less vulnerable to predation. In the northern part of the hybrid zone, clutch size did not differ among pair categories, however, there were

  15. Reutilization of previously hybridized slides for fluorescence in situ hybridization

    SciTech Connect

    Epstein, L.; DeVries, S.; Waldman, F.M.

    1995-12-01

    Application of fluorescence in situ hybridization (FISH) to clinical material is sometimes limited by sample size. In addition, heterogeneity among slides prepared from a single sample may lead to variation in FISH analyses. Reutilization of material for repeated FISH analyses would help to alleviate these problems. We have developed a simple procedure for repeated FISH analyses with directly conjugated probes. Previously hybridized probes are removed by incubation in denaturing solution, and slides can then be rehybridized without residual signals remaining. Several cycles of this procedure allow a full complement of chromosomal loci to be analyzed on the same population of cells. Advantages of this protocol include gaining more cytogenetic information from small samples and eliminating the problem of intratumorvariability. 5 refs., 4 figs.

  16. Hybridization of a sigma-delta-based CMOS hybrid detector

    NASA Astrophysics Data System (ADS)

    Kolb, K. E.; Stoffel, N. C.; Douglas, B.; Maloney, C. W.; Raisanen, A. D.; Ashe, B.; Figer, D. F.; Tamagawa, T.; Halpern, B.; Ignjatovic, Zeljko

    2010-07-01

    The Rochester Imaging Detector Laboratory, University of Rochester, Infotonics Technology Center, and Jet Process Corporation developed a hybrid silicon detector with an on-chip sigma-delta (ΣΔ) ADC. This paper describes the process and reports the results of developing a fabrication process to robustly produce high-quality bump bonds to hybridize a back-illuminated detector with its ΣΔ ADC. The design utilizes aluminum pads on both the readout circuit and the photodiode array with interconnecting indium bumps between them. The development of the bump bonding process is discussed, including specific material choices, interim process structures, and final functionality. Results include measurements of bond integrity, cross-wafer uniformity of indium bumps, and effects of process parameters on the final product. Future plans for improving the bump bonding process are summarized.

  17. Towards stable silicon nanoarray hybrid solar cells

    PubMed Central

    He, W. W.; Wu, K. J.; Wang, K.; Shi, T. F.; Wu, L.; Li, S. X.; Teng, D. Y.; Ye, C. H.

    2014-01-01

    Silicon nanoarray hybrid solar cells benefit from the ease of fabrication and the cost-effectiveness of the hybrid structure, and represent a new research focus towards the utilization of solar energy. However, hybrid solar cells composed of both inorganic and organic components suffer from the notorious stability issue, which has to be tackled before the hybrid solar cells could become a viable alternative for harvesting solar energy. Here we show that Si nanoarray/PEDOT:PSS hybrid solar cells with improved stability can be fabricated via eliminating the water inclusion in the initial formation of the heterojunction between Si nanoarray and PEDOT:PSS. The Si nanoarray hybrid solar cells are stable against rapid degradation in the atmosphere environment for several months without encapsulation. This finding paves the way towards the real-world applications of Si nanoarray hybrid solar cells. PMID:24430057

  18. Hybrid methods for cybersecurity analysis :

    SciTech Connect

    Davis, Warren Leon,; Dunlavy, Daniel M.

    2014-01-01

    Early 2010 saw a signi cant change in adversarial techniques aimed at network intrusion: a shift from malware delivered via email attachments toward the use of hidden, embedded hyperlinks to initiate sequences of downloads and interactions with web sites and network servers containing malicious software. Enterprise security groups were well poised and experienced in defending the former attacks, but the new types of attacks were larger in number, more challenging to detect, dynamic in nature, and required the development of new technologies and analytic capabilities. The Hybrid LDRD project was aimed at delivering new capabilities in large-scale data modeling and analysis to enterprise security operators and analysts and understanding the challenges of detection and prevention of emerging cybersecurity threats. Leveraging previous LDRD research e orts and capabilities in large-scale relational data analysis, large-scale discrete data analysis and visualization, and streaming data analysis, new modeling and analysis capabilities were quickly brought to bear on the problems in email phishing and spear phishing attacks in the Sandia enterprise security operational groups at the onset of the Hybrid project. As part of this project, a software development and deployment framework was created within the security analyst work ow tool sets to facilitate the delivery and testing of new capabilities as they became available, and machine learning algorithms were developed to address the challenge of dynamic threats. Furthermore, researchers from the Hybrid project were embedded in the security analyst groups for almost a full year, engaged in daily operational activities and routines, creating an atmosphere of trust and collaboration between the researchers and security personnel. The Hybrid project has altered the way that research ideas can be incorporated into the production environments of Sandias enterprise security groups, reducing time to deployment from months and

  19. Atom-Light Hybrid Interferometer.

    PubMed

    Chen, Bing; Qiu, Cheng; Chen, Shuying; Guo, Jinxian; Chen, L Q; Ou, Z Y; Zhang, Weiping

    2015-07-24

    A new type of hybrid atom-light interferometer is demonstrated with atomic Raman amplification processes replacing the beam splitting elements in a traditional interferometer. This nonconventional interferometer involves correlated optical and atomic waves in the two arms. The correlation between atoms and light developed with the Raman process makes this interferometer different from conventional interferometers with linear beam splitters. It is observed that the high-contrast interference fringes are sensitive to the optical phase via a path change as well as the atomic phase via a magnetic field change. This new atom-light correlated hybrid interferometer is a sensitive probe of the atomic internal state and should find wide applications in precision measurement and quantum control with atoms and photons. PMID:26252684

  20. Hybrid optomechanics for Quantum Technologies

    NASA Astrophysics Data System (ADS)

    Rogers, B.; Lo Gullo, N.; De Chiara, G.; Palma, G. M.; Paternostro, M.

    2014-06-01

    We review the physics of hybrid optomechanical systems consisting of a mechanical oscillator interacting with both a radiation mode and an additional matterlike system. We concentrate on the cases embodied by either a single or a multi-atom system (a Bose-Einstein condensate, in particular) and discuss a wide range of physical effects, from passive mechanical cooling to the set-up of multipartite entanglement, from optomechanical nonlocality to the achievement of non-classical states of a single mechanical mode. The reviewed material showcases the viability of hybridised cavity optomechanical systems as basic building blocks for quantum communication networks and quantum state-engineering devices, possibly empowered by the use of quantum and optimal control techniques. The results that we discuss are instrumental to the promotion of hybrid optomechanical devices as promising experimental platforms for the study of nonclassicality at the genuine mesoscopic level.

  1. Hybrid chirped pulse amplification system

    DOEpatents

    Barty, Christopher P.; Jovanovic, Igor

    2005-03-29

    A hybrid chirped pulse amplification system wherein a short-pulse oscillator generates an oscillator pulse. The oscillator pulse is stretched to produce a stretched oscillator seed pulse. A pump laser generates a pump laser pulse. The stretched oscillator seed pulse and the pump laser pulse are directed into an optical parametric amplifier producing an optical parametric amplifier output amplified signal pulse and an optical parametric amplifier output unconverted pump pulse. The optical parametric amplifier output amplified signal pulse and the optical parametric amplifier output laser pulse are directed into a laser amplifier producing a laser amplifier output pulse. The laser amplifier output pulse is compressed to produce a recompressed hybrid chirped pulse amplification pulse.

  2. Planar slot coupled microwave hybrid

    DOEpatents

    Petter, Jeffrey K.

    1991-01-01

    A symmetrical 180.degree. microwave hybrid is constructed by opening a slot line in a ground plane below a conducting strip disposed on a dielectric substrate, creating a slot coupled conductor. Difference signals propagating on the slot coupled conductor are isolated on the slot line leaving sum signals to propagate on the microstrip. The difference signal is coupled from the slot line onto a second microstrip line for transmission to a desired location. The microstrip branches in a symmetrical fashion to provide the input/output ports of the 180.degree. hybrid. The symmetry of the device provides for balance and isolation between sum and difference signals, and provides an advantageous balance between the power handling capabilities and the bandwidth of the device.

  3. Nanorice: a new hybrid nanostructure

    NASA Astrophysics Data System (ADS)

    Nordlander, P.; Brandl, D.; Le, F.; Wang, H.; Halas, N. J.

    2006-03-01

    The plasmon hybridization method [1] is applied to nanorice, a new metallic nanostructure which combines the properties of two popular tunable plasmonic nanoparticle geometries: nanorods and nanoshells. The particle consists of a prolate spheroidal dielectric core and a thin metallic shell, bearing a remarkable resemblance to a rice grain. The nanorice particle shows far greater geometric tunability of the optical resonance, larger local field intensity enhancements and far greater sensitivity as a surface plasmon resonance (SPR) nanosensor than any previously reported dielectric-metal nanostructure. The tunability of the nanorice particle arises from the interaction of primitive plasmons associated with the inner and outer surfaces of the shell. The results from plasmon hybridization are compared to FDTD simulations. [1] E. Prodan and P. Nordlander, J. Chem. Phys. 120(2004)5444-5454

  4. Protein-inorganic hybrid nanoflowers

    NASA Astrophysics Data System (ADS)

    Ge, Jun; Lei, Jiandu; Zare, Richard N.

    2012-07-01

    Flower-shaped inorganic nanocrystals have been used for applications in catalysis and analytical science, but so far there have been no reports of `nanoflowers' made of organic components. Here, we report a method for creating hybrid organic-inorganic nanoflowers using copper (II) ions as the inorganic component and various proteins as the organic component. The protein molecules form complexes with the copper ions, and these complexes become nucleation sites for primary crystals of copper phosphate. Interaction between the protein and copper ions then leads to the growth of micrometre-sized particles that have nanoscale features and that are shaped like flower petals. When an enzyme is used as the protein component of the hybrid nanoflower, it exhibits enhanced enzymatic activity and stability compared with the free enzyme. This is attributed to the high surface area and confinement of the enzymes in the nanoflowers.

  5. Hybrid sugarbeets - fuel from fodder

    SciTech Connect

    Yarris, L.

    1980-05-01

    Plant geneticists at Utah University are exploring the possibility of developing a hybrid sugarbeet especially bred for use in making alcohol fuel. They are aiming at increasing sugar quantity in the beet without having to worry about the quality factors that affect sugar crystallization. A cross between European fodder beets and U.S. sugarbeets which would be resistant to curly top virus disease is envisaged.

  6. Active and Passive Hybrid Sensor

    NASA Technical Reports Server (NTRS)

    Carswell, James R.

    2010-01-01

    A hybrid ocean wind sensor (HOWS) can map ocean vector wind in low to hurricane-level winds, and non-precipitating and precipitating conditions. It can acquire active and passive measurements through a single aperture at two wavelengths, two polarizations, and multiple incidence angles. Its low profile, compact geometry, and low power consumption permits installation on air craft platforms, including high-altitude unmanned aerial vehicles (UAVs).

  7. Hybrid optical acoustic seafloor mapping

    NASA Astrophysics Data System (ADS)

    Inglis, Gabrielle

    The oceanographic research and industrial communities have a persistent demand for detailed three dimensional sea floor maps which convey both shape and texture. Such data products are used for archeology, geology, ship inspection, biology, and habitat classification. There are a variety of sensing modalities and processing techniques available to produce these maps and each have their own potential benefits and related challenges. Multibeam sonar and stereo vision are such two sensors with complementary strengths making them ideally suited for data fusion. Data fusion approaches however, have seen only limited application to underwater mapping and there are no established methods for creating hybrid, 3D reconstructions from two underwater sensing modalities. This thesis develops a processing pipeline to synthesize hybrid maps from multi-modal survey data. It is helpful to think of this processing pipeline as having two distinct phases: Navigation Refinement and Map Construction. This thesis extends existing work in underwater navigation refinement by incorporating methods which increase measurement consistency between both multibeam and camera. The result is a self consistent 3D point cloud comprised of camera and multibeam measurements. In map construction phase, a subset of the multi-modal point cloud retaining the best characteristics of each sensor is selected to be part of the final map. To quantify the desired traits of a map several characteristics of a useful map are distilled into specific criteria. The different ways that hybrid maps can address these criteria provides justification for producing them as an alternative to current methodologies. The processing pipeline implements multi-modal data fusion and outlier rejection with emphasis on different aspects of map fidelity. The resulting point cloud is evaluated in terms of how well it addresses the map criteria. The final hybrid maps retain the strengths of both sensors and show significant improvement

  8. Hybrid Power Management Program Continued

    NASA Technical Reports Server (NTRS)

    Eichenberg, Dennis J.

    2002-01-01

    Hybrid Power Management (HPM) is the innovative integration of diverse, state-of-the-art power devices in an optimal configuration for space and terrestrial applications. The appropriate application and control of the various power devices significantly improves overall system performance and efficiency. The advanced power devices include ultracapacitors and photovoltaics. HPM has extremely wide potential with applications including power-generation, transportation, biotechnology, and space power systems. It may significantly alleviate global energy concerns, improve the environment, and stimulate the economy.

  9. Complex Hybrid Inflation and Baryogenesis

    SciTech Connect

    Delepine, David; Martinez, Carlos; Urena-Lopez, L. Arturo

    2007-04-20

    We propose a hybrid inflation model with a complex waterfall field which contains an interaction term that breaks the U(1) global symmetry associated with the waterfall field charge. We show that the asymmetric evolution of the real and imaginary parts of the complex field during the phase transition at the end of inflation translates into a charge asymmetry. The latter strongly depends on the vacuum expectation value of the waterfall field, which is well constrained by diverse cosmological observations.

  10. Electroactive functional hybrid layered nanocomposites

    SciTech Connect

    Destri, Giovanni Li; Torrisi, Vanna; Marletta, Giovanni

    2012-07-11

    Two methodologies to build new nanostructured hybrid layered nanocomposites are presented. The first one involves the preparation of hybrid metal/polymer nanolayers (NLs) by combining two monolayer preparation techniques: Horizontal Precipitation Langmuir Blodgett method (HP-ML), for copolymer monolayers and sputter deposition technique, for Au NLs deposition. The second methodology is aimed to prepare regular arrays of nanopores, with diameter ranging between 40-100 nm, in ultra-thin films of electroactive polymers, to obtain embedded regular arrays of nanopores filled by a further electroactive organic component. The produced hybrid MLs have been characterized by means of X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM) and Grazing Incidence X-ray Diffraction (GI-XRD). In the first case, current-voltage (I-V) measurements demonstrate that the multilayers exhibit a bipolar conduction behaviour (electrons and holes carriers), with a peculiar transition in the nature of the majority carriers (from holes to electrons) above a threshold number of bilayers. In the second case, it is found that the degree of pore filling, as well as the polymer crystallinity can be easily modulated, prompting the tuning of the photoresponse of the nanocomposites.

  11. Electroactive functional hybrid layered nanocomposites

    NASA Astrophysics Data System (ADS)

    Destri, Giovanni Li; Torrisi, Vanna; Marletta, Giovanni

    2012-07-01

    Two methodologies to build new nanostructured hybrid layered nanocomposites are presented. The first one involves the preparation of hybrid metal/polymer nanolayers (NLs) by combining two monolayer preparation techniques: Horizontal Precipitation Langmuir Blodgett method (HP-ML), for copolymer monolayers and sputter deposition technique, for Au NLs deposition. The second methodology is aimed to prepare regular arrays of nanopores, with diameter ranging between 40-100 nm, in ultra-thin films of electroactive polymers, to obtain embedded regular arrays of nanopores filled by a further electroactive organic component. The produced hybrid MLs have been characterized by means of X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM) and Grazing Incidence X-ray Diffraction (GI-XRD). In the first case, current-voltage (I-V) measurements demonstrate that the multilayers exhibit a bipolar conduction behaviour (electrons and holes carriers), with a peculiar transition in the nature of the majority carriers (from holes to electrons) above a threshold number of bilayers. In the second case, it is found that the degree of pore filling, as well as the polymer crystallinity can be easily modulated, prompting the tuning of the photoresponse of the nanocomposites.

  12. Standard-smooth hybrid inflation

    SciTech Connect

    Lazarides, George; Vamvasakis, Achilleas

    2007-12-15

    We consider the extended supersymmetric Pati-Salam model which, for {mu}>0 and universal boundary conditions, succeeds to yield experimentally acceptable b-quark masses by moderately violating Yukawa unification. It is known that this model can lead to new shifted or new smooth hybrid inflation. We show that a successful two-stage inflationary scenario can be realized within this model based only on renormalizable superpotential interactions. The cosmological scales exit the horizon during the first stage of inflation, which is of the standard hybrid type and takes place along the trivial flat direction with the inflaton driven by radiative corrections. Spectral indices compatible with the recent data can be achieved in global supersymmetry or minimal supergravity by restricting the number of e-foldings of our present horizon during the first inflationary stage. The additional e-foldings needed for solving the horizon and flatness problems are naturally provided by a second stage of inflation, which occurs mainly along the built-in new smooth hybrid inflationary path appearing right after the destabilization of the trivial flat direction at its critical point. Monopoles are formed at the end of the first stage of inflation and are, subsequently, diluted by the second stage of inflation to become utterly negligible in the present universe for almost all (for all) the allowed values of the parameters in the case of global supersymmetry (minimal supergravity)

  13. Electric and hybrid vehicles program

    NASA Astrophysics Data System (ADS)

    1990-04-01

    This thirteenth annual report on the implementation of the Electric and Hybrid Vehicle Research, Development and Demonstration Act of 1976 (Public Law 94-413), referred to as the Act, complies with the reporting requirements established in section 14 of the Act. In addition to informing Congress of the progress and plans of the Department of Energy's Electric and Hybrid Vehicles Program, this report is intended to serve as a communication link between the Department and all of the public and private interests involved in making the program a success. During FY 1989, significant progress was made in this program. There has been continuing interest shown by both the automobile manufacturers and supply sectors of our economy in electric and hybrid vehicles. The three major domestic automobile manufacturers all are devoting some effort towards electric vehicles. Their participation includes cost-shared contracts with Department of Energy and the Electric Power Research Institute as well as independently funded activities. Research and development efforts in batteries and propulsion components continue to achieve significant progress in providing industry with technology that will result in vehicles that will be more economically competitive.

  14. Additive manufacturing of hybrid circuits

    DOE PAGESBeta

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  15. Gravity localization on hybrid branes

    NASA Astrophysics Data System (ADS)

    Veras, D. F. S.; Cruz, W. T.; Maluf, R. V.; Almeida, C. A. S.

    2016-03-01

    This work deals with gravity localization on codimension-1 brane worlds engendered by compacton-like kinks, the so-called hybrid branes. In such scenarios, the thin brane behavior is manifested when the extra dimension is outside the compact domain, where the energy density is non-trivial, instead of asymptotically as in the usual thick brane models. The zero mode is trapped in the brane, as required. The massive modes, although not localized in the brane, have important phenomenological implications such as corrections to the Newton's law. We study such corrections in the usual thick domain wall and in the hybrid brane scenarios. By means of suitable numerical methods, we attain the mass spectrum for the graviton and the corresponding wavefunctions. The spectra possess the usual linearly increasing behavior from the Kaluza-Klein theories. Further, we show that the 4D gravitational force is slightly increased at short distances. The first eigenstate contributes highly for the correction to the Newton's law. The subsequent normalized solutions have diminishing contributions. Moreover, we find out that the phenomenology of the hybrid brane is not different from the usual thick domain wall. The use of numerical techniques for solving the equations of the massive modes is useful for matching possible phenomenological measurements in the gravitational law as a probe to warped extra dimensions.

  16. Quantifying hybridization in realistic time.

    PubMed

    Collins, Joshua; Linz, Simone; Semple, Charles

    2011-10-01

    Recently, numerous practical and theoretical studies in evolutionary biology aim at calculating the extent to which reticulation-for example, horizontal gene transfer, hybridization, or recombination-has influenced the evolution for a set of present-day species. It has been shown that inferring the minimum number of hybridization events that is needed to simultaneously explain the evolutionary history for a set of trees is an NP-hard and also fixed-parameter tractable problem. In this article, we give a new fixed-parameter algorithm for computing the minimum number of hybridization events for when two rooted binary phylogenetic trees are given. This newly developed algorithm is based on interleaving-a technique using repeated kernelization steps that are applied throughout the exhaustive search part of a fixed-parameter algorithm. To show that our algorithm runs efficiently to be applicable to a wide range of practical problem instances, we apply it to a grass data set and highlight the significant improvements in terms of running times in comparison to an algorithm that has previously been implemented. PMID:21210735

  17. Flight Testing of Hybrid Powered Vehicles

    NASA Technical Reports Server (NTRS)

    Story, George; Arves, Joe

    2006-01-01

    Hybrid Rocket powered vehicles have had a limited number of flights. Most recently in 2004, Scaled Composites had a successful orbital trajectory that put a private vehicle twice to over 62 miles high, the edge of space to win the X-Prize. This endeavor man rates a hybrid system. Hybrids have also been used in a number of one time launch attempts - SET-1, HYSR, HPDP. Hybrids have also been developed for use and flown in target drones. This chapter discusses various flight-test programs that have been conducted, hybrid vehicles that are in development, other hybrid vehicles that have been proposed and some strap-on applications have also been examined.

  18. Synergistic hybrid organic-inorganic aerogels.

    PubMed

    Wang, Xiao; Jana, Sadhan C

    2013-07-10

    A class of inorganic-organic hybrid mesoporous aerogel structure was synthesized by growing gel in a gel. In Type 1, silica gels were grown inside the macropores of thermoreversible syndiotactic polystyrene (sPS) gel, while Type 2 hybrid aerogels were obtained by thermoreversible gelation of sPS chains in the mesopores of preformed silica gel. The hybrid gels were converted into aerogels by exchanging the solvent with liquid carbon dioxide followed by supercritical drying. The hybrid aerogels presented cocontinuous networks of pearl-necklace silica particles and crystalline strands of sPS and exhibited the "petal effect" due to the presence of superhydrophobic sPS and hygroscopic silica. The compressive modulus and compressive strain show large enhancements over sPS and silica aerogels indicating synergy, although Type 1 hybrid aerogels were found to be more robust. The hybrid aerogels showed fast absorption and high absorption capacity for a representative hydrocarbon liquid. PMID:23773123

  19. Model-Based Prognostics of Hybrid Systems

    NASA Technical Reports Server (NTRS)

    Daigle, Matthew; Roychoudhury, Indranil; Bregon, Anibal

    2015-01-01

    Model-based prognostics has become a popular approach to solving the prognostics problem. However, almost all work has focused on prognostics of systems with continuous dynamics. In this paper, we extend the model-based prognostics framework to hybrid systems models that combine both continuous and discrete dynamics. In general, most systems are hybrid in nature, including those that combine physical processes with software. We generalize the model-based prognostics formulation to hybrid systems, and describe the challenges involved. We present a general approach for modeling hybrid systems, and overview methods for solving estimation and prediction in hybrid systems. As a case study, we consider the problem of conflict (i.e., loss of separation) prediction in the National Airspace System, in which the aircraft models are hybrid dynamical systems.

  20. Hybrid and Plug-in Electric Vehicles

    SciTech Connect

    2014-05-20

    Hybrid and plug-in electric vehicles use electricity either as their primary fuel or to improve the efficiency of conventional vehicle designs. This new generation of vehicles, often called electric drive vehicles, can be divided into three categories: hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles(PHEVs), and all-electric vehicles (EVs). Together, they have great potential to reduce U.S. petroleum use.

  1. Vertebrate Cells Express Protozoan Antigen after Hybridization

    NASA Astrophysics Data System (ADS)

    Crane, Mark St. J.; Dvorak, James A.

    1980-04-01

    Epimastigotes, the invertebrate host stage of Trypanosoma cruzi, the protozoan parasite causing Chagas' disease in man, were fused with vertebrate cells by using polyethylene glycol. Hybrid cells were selected on the basis of T. cruzi DNA complementation of biochemical deficiencies in the vertebrate cells. Some clones of the hybrid cells expressed T. cruzi-specific antigen. It might be possible to use selected antigens obtained from the hybrids as vaccines for immunodiagnosis or for elucidation of the pathogenesis of Chagas' disease.

  2. Hybrid evolutionary programming for heavily constrained problems.

    PubMed

    Myung, H; Kim, J H

    1996-01-01

    A hybrid of evolutionary programming (EP) and a deterministic optimization procedure is applied to a series of non-linear and quadratic optimization problems. The hybrid scheme is compared with other existing schemes such as EP alone, two-phase (TP) optimization, and EP with a non-stationary penalty function (NS-EP). The results indicate that the hybrid method can outperform the other methods when addressing heavily constrained optimization problems in terms of computational efficiency and solution accuracy. PMID:8833746

  3. Parallel Hybrid Vehicle Optimal Storage System

    NASA Technical Reports Server (NTRS)

    Bloomfield, Aaron P.

    2009-01-01

    A paper reports the results of a Hybrid Diesel Vehicle Project focused on a parallel hybrid configuration suitable for diesel-powered, medium-sized, commercial vehicles commonly used for parcel delivery and shuttle buses, as the missions of these types of vehicles require frequent stops. During these stops, electric hybridization can effectively recover the vehicle's kinetic energy during the deceleration, store it onboard, and then use that energy to assist in the subsequent acceleration.

  4. A genomic perspective on hybridization and speciation

    PubMed Central

    Payseur, Bret A.; Rieseberg, Loren H.

    2016-01-01

    Hybridization among diverging lineages is common in nature. Genomic data provide a special opportunity to characterize the history of hybridization and the genetic basis of speciation. We review existing methods and empirical studies to identify recent advances in the genomics of hybridization, as well as issues that need to be addressed. Notable progress has been made in the development of methods for detecting hybridization and inferring individual ancestries. However, few approaches reconstruct the magnitude and timing of gene flow, estimate the fitness of hybrids or incorporate knowledge of recombination rate. Empirical studies indicate that the genomic consequences of hybridization are complex, including a highly heterogeneous landscape of differentiation. Inferred characteristics of hybridization differ substantially among species groups. Loci showing unusual patterns – which may contribute to reproductive barriers – are usually scattered throughout the genome, with potential enrichment in sex chromosomes and regions of reduced recombination. We caution against the growing trend of interpreting genomic variation in summary statistics across genomes as evidence of differential gene flow. We argue that converting genomic patterns into useful inferences about hybridization will ultimately require models and methods that directly incorporate key ingredients of speciation, including the dynamic nature of gene flow, selection acting in hybrid populations and recombination rate variation. PMID:26836441

  5. On Hybrid and mixed finite element methods

    NASA Technical Reports Server (NTRS)

    Pian, T. H. H.

    1981-01-01

    Three versions of the assumed stress hybrid model in finite element methods and the corresponding variational principles for the formulation are presented. Examples of rank deficiency for stiffness matrices by the hybrid stress model are given and their corresponding kinematic deformation modes are identified. A discussion of the derivation of general semi-Loof elements for plates and shells by the hybrid stress method is given. It is shown that the equilibrium model by Fraeijs de Veubeke can be derived by the approach of the hybrid stress model as a special case of semi-Loof elements.

  6. Hybrid Multicomponent Hydrogels for Tissue Engineering

    PubMed Central

    Jia, Xinqiao; Kiick, Kristi L.

    2009-01-01

    Artificial ECMs that not only closely mimic the hybrid nature of the natural ECM but also provide tunable material properties and enhanced biological functions are attractive candidates for tissue engineering applications. This review summarizes recent advances in developing multicomponent hybrid hydrogels by integrating modular and heterogeneous building blocks into well-defined, multifunctional hydrogel composites. The individual building blocks can be chemically, morphologically, and functionally diverse, and the hybridization can occur at molecular level or microscopic scale. The modular nature of the designs, combined with the potential synergistic effects of the hybrid systems, has resulted in novel hydrogel matrices with robust structure and defined functions. PMID:19107720

  7. Organic/inorganic hybrid coatings for anticorrosion

    NASA Astrophysics Data System (ADS)

    He, Zhouying

    Compared to organic coatings, organic-inorganic hybrid coatings can potentially improve the anticorrosion performance. The organic phase provides the excellent mechaincal and barrier properties while the inorganic phase acts as an adhesion promoter and corrosion inhibitor. Despite that many studies on alkoxylsilane-based hybrid coatings have been developed and studied, their weatherability and anticorrosion performance has been rarely evaluated. On the other hand, organic-inorganic hybrid coatings based on mixed sol-gel precursors have received much less attention compared to alkoxylsilane-based hybrid coatings. In the first part, polyurethane hybrid coatings with a unique hybrid crosslinked structure as an improved unicoat were successfully prepared. The effect of polyesters on physical properties of the hybrid coatings was studied. Polyurethane coatings derived from cycloaliphatic polyester show comparable properties than those derived from the commercially viable aromatic polyester. Introducing the polysiloxane part into the polyurethane coatings enhanced the crosslinking density, Tg, mechanical properties, and general coating properties. The increased adhesion between the hybrid coating and the substrate make the hybrid coating a good candidate for anticorrosion application, which is shown by electrochemical impedance spectroscopy (EIS). The degradation mechanism of the polyurethane/polysiloxane hybrid coatings under various weathering conditions was shown to be the scission of the urethane and ester groups in the organic phase along with reorganizing and rearranging of the inorganic phase. The anticorrosion performance of the cycloaliphatic hybrid was much better than that of aromatic based hybrid under outdoor weathering based on visual observation and EIS analysis. Acid undercutting is an issue for TEOS based hybrid coating. In the second part, design of experiments (DOEs) was used to statistically investigate on the effect of sol-gel precursors. The

  8. Hybrid slab-microchannel gel electrophoresis system

    DOEpatents

    Balch, Joseph W.; Carrano, Anthony V.; Davidson, James C.; Koo, Jackson C.

    1998-01-01

    A hybrid slab-microchannel gel electrophoresis system. The hybrid system permits the fabrication of isolated microchannels for biomolecule separations without imposing the constraint of a totally sealed system. The hybrid system is reusable and ultimately much simpler and less costly to manufacture than a closed channel plate system. The hybrid system incorporates a microslab portion of the separation medium above the microchannels, thus at least substantially reducing the possibility of non-uniform field distribution and breakdown due to uncontrollable leakage. A microslab of the sieving matrix is built into the system by using plastic spacer materials and is used to uniformly couple the top plate with the bottom microchannel plate.

  9. Hybrid model for solidification and convection

    NASA Technical Reports Server (NTRS)

    Oldenburg, Curtis M.; Spera, Frank J.

    1992-01-01

    A hybrid model for continuum phase-change problems is presented. The hybrid model accounts for flow in regions of concentrated mush, dilute mush, and single-phase liquid. Scale analysis shows that, in dilute mush, the Blake-Kozeny-Carman relation may lead to inaccuracy in the continuum formulation for certain values of the Rayleigh and Darcy numbers. The hybrid model uses arctangent switching functions to switch on the Darcy flow and variable viscosity terms depending on the local value of the fraction solid. Two-dimensional example calculations suggest that the hybrid model more accurately accounts for transport in the dilute mush region.

  10. Hybrid dampers for active vibration control

    SciTech Connect

    Gordaninejad, F.; Ray, A.

    1994-12-31

    In the present investigation feasibility of using hybrid electrorheological (ER) fluid dampers for active vibration control is examined. Small-scale, three-electrode hybrid dampers were designed and built such that they have two separate compartments to contain a viscous oil and an ER fluid. The results were compared to those obtained using a three-electrode ER fluid damper. It was shown that the use of hybrid ER fluid damper can enhance the damping. It was also found that the bang-bang and linear proportional control algorithms have similar effects on the amplitude-time response obtained from hybrid and ER fluid dampers.

  11. Interploidy hybridization in sympatric zones: the formation of Epidendrum fulgens × E. puniceoluteum hybrids (Epidendroideae, Orchidaceae)

    PubMed Central

    Moraes, Ana P; Chinaglia, Mariana; Palma-Silva, Clarisse; Pinheiro, Fábio

    2013-01-01

    Interspecific hybridization is a primary cause of extensive morphological and chromosomal variation and plays an important role in plant species diversification. However, the role of interploidal hybridization in the formation of hybrid swarms is less clear. Epidendrum encompasses wide variation in chromosome number and lacks strong premating barriers, making the genus a good model for clarifying the role of chromosomes in postzygotic barriers in interploidal hybrids. In this sense, hybrids from the interploidal sympatric zone between E. fulgens (2n = 2x = 24) and E. puniceoluteum (2n = 4x = 56) were analyzed using cytogenetic techniques to elucidate the formation and establishment of interploidal hybrids. Hybrids were not a uniform group: two chromosome numbers were observed, with the variation being a consequence of severe hybrid meiotic abnormalities and backcrossing with E. puniceoluteum. The hybrids were triploids (2n = 3x = 38 and 40) and despite the occurrence of enormous meiotic problems associated with triploidy, the hybrids were able to backcross, producing successful hybrid individuals with broad ecological distributions. In spite of the nonpolyploidization of the hybrid, its formation is a long-term evolutionary process rather than a product of a recent disturbance, and considering other sympatric zones in Epidendrum, these events could be recurrent. PMID:24198942

  12. Hybrid laminar flow control study

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Hybrid laminar flow control (HLFC) in which leading edge suction is used in conjunction with wing pressure distribution tailoring to postpone boundary layer transition and reduce friction drag was examined. Airfoil design characteristics required for laminar flow control (LFC) were determined. The aerodynamic design of the HLFC wing for a 178 passenger commercial turbofan transport was developed, and a drag was estimated. Systems changes required to install HLFC were defined, and weights and fuel economy were estimated. The potential for 9% fuel reduction for a 3926-km (2120-nmi) mission is identified.

  13. Hybrid grapheme plasmonic waveguide modulators

    NASA Astrophysics Data System (ADS)

    Ansell, D.; Thackray, B. D.; Aznakayeva, D. E.; Thomas, P.; Auton, G. H.; Marshall, O. P.; Rodriguez, F. J.; Radko, I. P.; Han, Z.; Bozhevolnyi, S. I.; Grigorenko, A. N.

    2016-03-01

    The unique optical and electronic properties of graphene allow one to realize active optical devices. While several types of graphene-based photonic modulators have already been demonstrated, the potential of combining the versatility of graphene with sub-wavelength field confinement of plasmonic/metallic structures is not fully realized. Here we report fabrication and study of hybrid graphene-plasmonic modulators. We consider several types of modulators and identify the most promising one for light modulation at telecom and near-infrared. Our proof-of-concept results pave the way towards on-chip realization of efficient graphene-based active plasmonic waveguide devices for optical communications.

  14. Hybrid spread spectrum radio system

    DOEpatents

    Smith, Stephen F.; Dress, William B.

    2010-02-02

    Systems and methods are described for hybrid spread spectrum radio systems. A method includes modulating a signal by utilizing a subset of bits from a pseudo-random code generator to control an amplification circuit that provides a gain to the signal. Another method includes: modulating a signal by utilizing a subset of bits from a pseudo-random code generator to control a fast hopping frequency synthesizer; and fast frequency hopping the signal with the fast hopping frequency synthesizer, wherein multiple frequency hops occur within a single data-bit time.

  15. Electric and Hybrid Vehicles Program

    NASA Astrophysics Data System (ADS)

    1994-08-01

    This program, in cooperation with industry, is conducting research, development, testing, and evaluation activities to develop the technologies that would lead to production and introduction of low-and zero-emission electric and hybrid vehicles into the Nation's transportation fleet. This annual report describes program activities in the areas of advanced battery, fuel cell, and propulsion systems development. Testing and evaluation of new technology in fleet site operations and laboratories are also provided. Also presented is status on incentives (CAFE, 1992 Energy Policy Act) and use of foreign components, and a listing of publications by DOE, national laboratories, and contractors.

  16. Kit for detecting nucleic acid sequences using competitive hybridization probes

    DOEpatents

    Lucas, Joe N.; Straume, Tore; Bogen, Kenneth T.

    2001-01-01

    A kit is provided for detecting a target nucleic acid sequence in a sample, the kit comprising: a first hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a first portion of the target sequence, the first hybridization probe including a first complexing agent for forming a binding pair with a second complexing agent; and a second hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a second portion of the target sequence to which the first hybridization probe does not selectively hybridize, the second hybridization probe including a detectable marker; a third hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a first portion of the target sequence, the third hybridization probe including the same detectable marker as the second hybridization probe; and a fourth hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a second portion of the target sequence to which the third hybridization probe does not selectively hybridize, the fourth hybridization probe including the first complexing agent for forming a binding pair with the second complexing agent; wherein the first and second hybridization probes are capable of simultaneously hybridizing to the target sequence and the third and fourth hybridization probes are capable of simultaneously hybridizing to the target sequence, the detectable marker is not present on the first or fourth hybridization probes and the first, second, third, and fourth hybridization probes each include a competitive nucleic acid sequence which is sufficiently complementary to a third portion of the target sequence that the competitive sequences of the first, second, third, and fourth hybridization probes compete with each other to hybridize to the third portion of the

  17. COMPARISON OF COMPARATIVE GENOMIC HYBRIDIZATIONS TECHNOLOGIES ACROSS MICROARRAY PLATFORMS

    EPA Science Inventory

    Comparative Genomic Hybridization (CGH) measures DNA copy number differences between a reference genome and a test genome. The DNA samples are differentially labeled and hybridized to an immobilized substrate. In early CGH experiments, the DNA targets were hybridized to metaphase...

  18. Quantum technologies with hybrid systems

    PubMed Central

    Kurizki, Gershon; Bertet, Patrice; Kubo, Yuimaru; Mølmer, Klaus; Petrosyan, David; Rabl, Peter; Schmiedmayer, Jörg

    2015-01-01

    An extensively pursued current direction of research in physics aims at the development of practical technologies that exploit the effects of quantum mechanics. As part of this ongoing effort, devices for quantum information processing, secure communication, and high-precision sensing are being implemented with diverse systems, ranging from photons, atoms, and spins to mesoscopic superconducting and nanomechanical structures. Their physical properties make some of these systems better suited than others for specific tasks; thus, photons are well suited for transmitting quantum information, weakly interacting spins can serve as long-lived quantum memories, and superconducting elements can rapidly process information encoded in their quantum states. A central goal of the envisaged quantum technologies is to develop devices that can simultaneously perform several of these tasks, namely, reliably store, process, and transmit quantum information. Hybrid quantum systems composed of different physical components with complementary functionalities may provide precisely such multitasking capabilities. This article reviews some of the driving theoretical ideas and first experimental realizations of hybrid quantum systems and the opportunities and challenges they present and offers a glance at the near- and long-term perspectives of this fascinating and rapidly expanding field. PMID:25737558

  19. Silica-Ceria Hybrid Nanostructures

    SciTech Connect

    Munusamy, Prabhakaran; Sanghavi, Shail P.; Nachimuthu, Ponnusamy; Baer, Donald R.; Thevuthasan, Suntharampillai

    2012-04-25

    A new hybrid material system that consists of ceria attached silica nanoparticles has been developed. Because of the versatile properties of silica and versatile properties of silica and versatile properties of silica and versatile properties of silica and versatile properties of silica and versatile properties of silica and versatile properties of silica and versatile properties of silica and versatile properties of silica and versatile properties of silica and versatile properties of silica and versatile properties of silica and antioxidant properties of ceria nanoparticles, this material system is ideally suited for biomedical applications. The silica particles of size ~50nm were synthesized by the Stöber synthesis method and ceria nanoparticles of size ~2-3nm was attached to the silica surface using a hetrocoagulation method. The presence of silanol groups on the surface of silica particles mediated homogenous nucleation of ceria which were attached to silica surface by Si-O-Ce bonding. The formations of silica-ceria hybrid nanostructures were characterized by X-photoelectron spectroscopy (XPS) and high resolution transmission electron microscopy (HRTEM). The HRTEM image confirms the formation of individual crystallites of ceria nanoparticles attached to the silica surface. The XPS analysis indicates that ceria nanoparticles are chemically bonded to surface of silica and possess mixture of +3 and +4 chemical states.

  20. Hybrid regional air pollution models

    SciTech Connect

    Drake, R.L.

    1980-03-01

    This discussion deals with a family of air quality models for predicting and analyzing the fine particulate loading in the atmosphere, for assessing the extent and degree of visibility impairment, and for determining the potential of pollutants for increasing the acidity of soils and water. The major horizontal scales of interest are from 400km to 2000km; and the time scales may vary from several hours, to days, weeks, and a few months or years, depending on the EPA regulations being addressed. First the role air quality models play in the general family of atmospheric simulation models is described. Then, the characteristics of a well-designed, comprehensive air quality model are discussed. Following this, the specific objectives of this workshop are outlined, and their modeling implications are summarized. There are significant modeling differences produced by the choice of the coordinate system, whether it be the fixed Eulerian system, the moving Lagrangian system, or some hybrid of the two. These three systems are briefly discussed, and a list of hybrid models that are currently in use are given. Finally, the PNL regional transport model is outlined and a number of research needs are listed.

  1. RHO—Radiation Hybrid Ordering

    PubMed Central

    Ben-Dor, Amir; Chor, Benny; Pelleg, Dan

    2000-01-01

    Radiation hybrid (RH) mapping is a somatic cell technique that is used for ordering markers along a chromosome and estimating the physical distances between them. With the advent of this mapping technique, analyzing the experimental data is becoming a challenging and demanding computational task. In this paper we present the software package RHO (radiation hybrid ordering). The package implements a number of heuristics that attempt to order genomic markers along a chromosome, given as input the results of an RH experiment. The heuristics are based on reducing an appropriate optimization problem to the traveling salesman problem (TSP). The reduced optimization problem is either the nonparametric obligate chromosome breaks (OCBs) or the parametric maximum likelihood estimation (MLE). We tested our package on both simulated and publicly available RH data. For synthetic RH data, the reconstructed markers' permutation is very close to the original permutation, even with fairly high error rates. For real data we used the framework markers' data from the Whitehead Institute maps. For most of the chromosomes (18 out of 23), there is a perfect agreement or nearly perfect agreement (reversal of chromosome arm or arms) between our maps and the Whitehead framework maps. For the remaining five chromosomes, our maps improve on the Whitehead framework maps with respect to both optimization criteria, having higher likelihood and fewer breakpoints. For three chromosomes, the results differ significantly (lod score >1.75), with chromosome 2 having the largest improvement (lod score 3.776). PMID:10720577

  2. Electric and hybrid vehicles program

    NASA Astrophysics Data System (ADS)

    1992-05-01

    The Department of Energy's (DOE) Electric and Hybrid Vehicles (EHV) Program is conducting research, development, testing, and evaluation activities to encourage the use of electricity and alternative fuels for transportation. This program supports the expanded DOE involvement as recommended in the National Energy Strategy. The transportation sector is the single largest user of petroleum; it consumed 63 percent of all petroleum used in the United States last year. Only a small fraction (5 percent) of electricity is generated from petroleum. Electric vehicles, which are themselves virtually pollution-free, could play a key role in helping to reduce both urban pollution and our dependence on petroleum imports. The program's goals are to develop, in cooperation with industry, the technology that will lead to the production and introduction of pollution-free electric vehicles into the Nation's transportation fleet and substitute domestic sources of energy for petroleum-based fuels. This report describes progress achieved in developing electric and hybrid vehicle technologies, beginning with highlights of recent accomplishments in FY-91. Detailed descriptions are provided of program activities during FY-91 in the areas of battery, fuel-cell, and propulsion system development, and testing and evaluation of new technology in fleet site operations and in laboratories. In accordance with the reporting requirements of the Act, this annual report contains a status report on incentives and use of foreign components and concludes with a list of publications resulting from the DOE program.

  3. Coherent control in hybrid materials

    NASA Astrophysics Data System (ADS)

    Tian, Chao; Sukharev, Maxim; Malinovskaya, Svetlana

    2013-05-01

    A quickly growing field of hybrid materials is emerging on the base of latest advancements in nanoplasmonic science. Here one merges plasmonics with atomic and molecular physics considering systems comprised of quantum emitters and metal nano-structures. Such systems exhibit a wide variety of new phenomena. It has long been realized that quantum control could be successfully applied to optically active nano-systems. In this paper we explore the ideas of stimulated Raman adiabatic passage (STIRAP) applied to ensembles of atoms optically coupled to plasmonic systems. We demonstrate the implementation of STIRAP as a tool to control scattering, reflection, and transmission properties of hybrid systems. As an example we consider a core-shell silver nanowire with resonantly coupled layer of three-level atoms. A self-consistent model of Maxwell-Liouville-von Neumann equations is implemented that allows taking into account the collective effects between atoms. We show that both linear and nonlinear optical properties of atomic ensembles may be controlled by coupling to plasmonic nano-structures. The work is partially supported by NSF.

  4. Comparative genomic hybridization: an overview.

    PubMed Central

    Houldsworth, J.; Chaganti, R. S.

    1994-01-01

    Comparative genomic hybridization (CGH) is a newly described molecular-cytogenetic assay that globally assays for chromosomal gains and losses in a genomic complement. In this assay, normal human metaphase chromosomes are competitively hybridized with two differentially labeled genomic DNAs (test and reference), which upon fluorescence microscopy, reveal the chromosomal locations of copy number changes in DNA sequences between the two complements. Application of CGH to DNAs extracted from fresh frozen specimens and cell lines of various tumor types has revealed a number of recurring chromosomal gains and losses that were undetected by traditional cytogenetic analysis. Few previously known sites were found to be in higher copy number, or lost by CGH, while many novel amplified regions were identified. These regions warrant further molecular genetic studies aimed at isolating the perturbed genes. Since CGH can also be performed on DNA extracted from formalin-fixed paraffin-embedded archived tumor specimens with few modifications, gains and losses of genetic material can be determined for specimens that would otherwise be unanalyzable. Prospective and retrospective application of CGH to tumor specimens would permit correlative studies to be performed, possibly identifying diagnostic and prognostic indicators of disease. CGH may also have a future role in detection and identification of chromosomal abnormalities in prenatal diagnosis and in dysmorphic anomalies. Images Figure 1 Figure 2 PMID:7992829

  5. Compressible generalized hybrid Monte Carlo

    NASA Astrophysics Data System (ADS)

    Fang, Youhan; Sanz-Serna, J. M.; Skeel, Robert D.

    2014-05-01

    One of the most demanding calculations is to generate random samples from a specified probability distribution (usually with an unknown normalizing prefactor) in a high-dimensional configuration space. One often has to resort to using a Markov chain Monte Carlo method, which converges only in the limit to the prescribed distribution. Such methods typically inch through configuration space step by step, with acceptance of a step based on a Metropolis(-Hastings) criterion. An acceptance rate of 100% is possible in principle by embedding configuration space in a higher dimensional phase space and using ordinary differential equations. In practice, numerical integrators must be used, lowering the acceptance rate. This is the essence of hybrid Monte Carlo methods. Presented is a general framework for constructing such methods under relaxed conditions: the only geometric property needed is (weakened) reversibility; volume preservation is not needed. The possibilities are illustrated by deriving a couple of explicit hybrid Monte Carlo methods, one based on barrier-lowering variable-metric dynamics and another based on isokinetic dynamics.

  6. Coupling hybrid inflation to moduli

    NASA Astrophysics Data System (ADS)

    Brax, Philippe; van de Bruck, Carsten; Davis, Anne-Christine; Davis, Stephen C.

    2006-09-01

    Hybrid inflation can be realized in low energy effective string theory, as described using supergravity. We find that the coupling of moduli to F-term hybrid inflation in supergravity leads to a slope and a curvature for the inflaton potential. The epsi and η parameters receive contributions at tree and one loop level which are not compatible with slow roll inflation. Furthermore the coupling to the moduli sector can even prevent inflation from ending at all. We show that introducing shift symmetries in the inflationary sector and taking the moduli sector to be no-scale removes most of these problems. If the moduli fields are fixed during inflation, as is usually assumed, it appears that viable slow roll inflation can then be obtained with just one fine-tuning of the moduli sector parameters. However, we show this is not a reasonable assumption, and that the small variation of the moduli fields during inflation gives a significant contribution to the effective inflaton potential. This typically implies that ηap-6, although it may be possible to obtain smaller values with heavy fine-tuning.

  7. Hybrid and Electric Advanced Vehicle Systems Simulation

    NASA Technical Reports Server (NTRS)

    Beach, R. F.; Hammond, R. A.; Mcgehee, R. K.

    1985-01-01

    Predefined components connected to represent wide variety of propulsion systems. Hybrid and Electric Advanced Vehicle System (HEAVY) computer program is flexible tool for evaluating performance and cost of electric and hybrid vehicle propulsion systems. Allows designer to quickly, conveniently, and economically predict performance of proposed drive train.

  8. Computer code for intraply hybrid composite design

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Sinclair, J. H.

    1981-01-01

    A computer program is described for intraply hybrid composite design (INHYD). The program includes several composite micromechanics theories, intraply hybrid composite theories, and a hygrothermomechanical theory. These theories provide INHYD with considerable flexibility and capability which the user can exercise through several available options. Key features and capabilities of INHYD are illustrated through selected samples.

  9. Hybrid Compounding in New Zealand English

    ERIC Educational Resources Information Center

    Degani, Marta; Onysko, Alexander

    2010-01-01

    This study investigates hybrid compound formation of Maori and English terms in present day New Zealand English (NZE). On the background of Maori and English language contact, the phenomenon of hybrid compounding emerges as a process that, on the one hand, symbolizes the vitality of the Maori element in NZE and, on the other hand, marks the…

  10. Flavor evaluation of fresh tangerine hybrids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This report describes on-going research on the quality evaluation of tangerines from the CREC breeding program begun in 2006-2007. Twelve of the 43 tangerine hybrids evaluated in 2007 were selected for re-evaluation in 2008, with 9 named commercial cultivars as references, and 8 new hybrids. Fruit w...

  11. The Federal electric and hybrid vehicle program

    NASA Technical Reports Server (NTRS)

    Schwartz, H. J.

    1980-01-01

    The commercial development and use of electric and hybrid vehicles is discussed with respect to its application as a possible alternative transportation system. A market demonstration is described that seeks to place 10,000 electric hybrid vehicles into public and private sector demonstrations.

  12. High power battery systems for hybrid vehicles

    NASA Astrophysics Data System (ADS)

    Corson, Donald W.

    Pure electric and hybrid vehicles have differing demands on the battery system of a vehicle. This results in correspondingly different demands on the battery management of a hybrid vehicle. Examples show the differing usage patterns. The consequences for the battery cells and the battery management are discussed. The importance of good thermal management is underlined.

  13. First-Generation Hybrid Compact Compton Imager

    SciTech Connect

    Cunningham, M; Burks, M; Chivers, D; Cork, C; Fabris, L; Gunter, D; Krings, T; Lange, D; Hull, E; Mihailescu, L; Nelson, K; Niedermayr, T; Protic, D; Valentine, J; Vetter, K; Wright, D

    2005-11-07

    At Lawrence Livermore National Laboratory, we are pursuing the development of a gamma-ray imaging system using the Compton effect. We have built our first generation hybrid Compton imaging system, and we have conducted initial calibration and image measurements using this system. In this paper, we present the details of the hybrid Compton imaging system and initial calibration and image measurements.

  14. The Hybridization of Social Science Knowledge.

    ERIC Educational Resources Information Center

    Dogan, Mattei

    1996-01-01

    Describes the growth of science as a twofold process: (1) the fragmentation of formal disciplines; and (2) a recombination of the specialties resulting from this fragmentation. Discusses the division of disciplines into specialized subfields that has led to the development of hybrid specialties, and maintains that the concept of hybridization is…

  15. NETL's Hybrid Performance, or Hyper, facility

    SciTech Connect

    2013-06-12

    NETL's Hybrid Performance, or Hyper, facility is a one-of-a-kind laboratory built to develop control strategies for the reliable operation of fuel cell/turbine hybrids and enable the simulation, design, and implementation of commercial equipment. The Hyper facility provides a unique opportunity for researchers to explore issues related to coupling fuel cell and gas turbine technologies.

  16. California State University, Northridge: Hybrid Lab Courses

    ERIC Educational Resources Information Center

    EDUCAUSE, 2014

    2014-01-01

    California State University, Northridge's Hybrid Lab course model targets high failure rate, multisection, gateway courses in which prerequisite knowledge is a key to success. The Hybrid Lab course model components incorporate interventions and practices that have proven successful at CSUN and other campuses in supporting students, particularly…

  17. 75 FR 81456 - Hybrid Retirement Plans; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-28

    ... were published in the Federal Register on Tuesday, October 19, 2010 (75 FR 64123) providing guidance relating to certain provisions of the Internal Revenue Code that apply to hybrid defined benefit pension... Internal Revenue Service 26 CFR Part 1 RIN 1545-BG36 Hybrid Retirement Plans; Correction AGENCY:...

  18. Sweet Corn Hybrid Disease Nursery - 2009

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This report summarizes the reactions of 387 sweet corn hybrids to Stewart’s wilt, common rust, maize dwarf mosaic virus, Southern leaf blight, and Northern leaf blight based on their performance in the University of Illinois sweet corn disease nursery in 2009. The reactions of these hybrids to three...

  19. Evaluating the Pedagogical Potential of Hybrid Models

    ERIC Educational Resources Information Center

    Levin, Tzur; Levin, Ilya

    2013-01-01

    The paper examines how the use of hybrid models--that consist of the interacting continuous and discrete processes--may assist in teaching system thinking. We report an experiment in which undergraduate students were asked to choose between a hybrid and a continuous solution for a number of control problems. A correlation has been found between…

  20. 40 CFR 1036.525 - Hybrid engines.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... part and/or 40 CFR part 1065. If you test hybrid engines using the SET, deactivate the hybrid features... state of charge constraints. (1) Map the engine as specified in 40 CFR 1065.510. This requires separate... in CO2 emissions resulting from the power take-off operation as described in 40 CFR 1037.525....

  1. Benefits of Hybrid Classes in Community Colleges

    ERIC Educational Resources Information Center

    Barker, Joel

    2015-01-01

    This article discusses hybrid courses and their impact on educational facilities, their students, and instructors. Instructors now have over ten years of data related to hybrid courses and by trial and error have devised different strategies to plan and execute lesson plans via partly online forums. Programs are in place that give students the…

  2. NETL's Hybrid Performance, or Hyper, facility

    ScienceCinema

    None

    2014-06-26

    NETL's Hybrid Performance, or Hyper, facility is a one-of-a-kind laboratory built to develop control strategies for the reliable operation of fuel cell/turbine hybrids and enable the simulation, design, and implementation of commercial equipment. The Hyper facility provides a unique opportunity for researchers to explore issues related to coupling fuel cell and gas turbine technologies.

  3. Sweet Corn Hybrid Disease Nursery - 2010

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This report summarizes the reactions of 439 sweet corn hybrids to Stewart’s wilt, common rust, maize dwarf mosaic virus, Southern leaf blight, and Northern leaf blight based on their performance in the University of Illinois sweet corn disease nursery in 2010. The reactions of these hybrids to two h...

  4. Computer code for intraply hybrid composite design

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Sinclair, J. H.

    1981-01-01

    A computer program has been developed and is described herein for intraply hybrid composite design (INHYD). The program includes several composite micromechanics theories, intraply hybrid composite theories and a hygrothermomechanical theory. These theories provide INHYD with considerable flexibility and capability which the user can exercise through several available options. Key features and capabilities of INHYD are illustrated through selected samples.

  5. Design guidelines for hybrid microcircuits; organic adhesives for hybrid microcircuits

    NASA Technical Reports Server (NTRS)

    Perkins, K. L.; Licari, J. J.

    1975-01-01

    The properties of organic adhesives were studied to acquire an adequate information base to generate a guideline document for the selection of adhesives for use in high reliability hybrid microcircuits. Specific areas covered include: (1) alternate methods for determining the outgassing of cured adhesives; (2) effects of long term aging at 150C on the electrical properties of conductive adhesives; (3) effects of shelf life age on adhesive characteristics; (4) bond strengths of electrically conductive adhesives on thick film gold metallization, (5) a copper filled adhesive; (6) effects of products outgassed from cured adhesives on device electrical parameters; (7) metal migration from electrically conductive adhesives; and (8) ionic content of electrically insulative adhesives. The tests performed during these investigations are described, and the results obtained are discussed in detail.

  6. Silicon nanocrystal-noble metal hybrid nanoparticles.

    PubMed

    Sugimoto, H; Fujii, M; Imakita, K

    2016-06-01

    We report a novel and facile self-limiting synthesis route of silicon nanocrystal (Si NC)-based colloidally stable semiconductor-metal (gold, silver and platinum) hybrid nanoparticles (NPs). For the formation of hybrid NPs, we employ ligand-free colloidal Si NCs with heavily boron (B) and phosphorus (P) doped shells. By simply mixing B and P codoped colloidal Si NCs with metal salts, hybrid NPs consisting of metal cores and Si NC shells are spontaneously formed. We demonstrate the synthesis of highly uniform and size controllable hybrid NPs. It is shown that codoped Si NCs act as a reducing agent for metal salts and also as a protecting layer to stop metal NP growth. The process is thus self-limiting. The development of a variety of Si NC-based hybrid NPs is a promising first step for the design of biocompatible multifunctional NPs with broad material choices for biosensing, bioimaging and solar energy conversion. PMID:27121127

  7. Space and power efficient hybrid counters array

    DOEpatents

    Gara, Alan G.; Salapura, Valentina

    2009-05-12

    A hybrid counter array device for counting events. The hybrid counter array includes a first counter portion comprising N counter devices, each counter device for receiving signals representing occurrences of events from an event source and providing a first count value corresponding to a lower order bits of the hybrid counter array. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits of the hybrid counter array. A control device monitors each of the N counter devices of the first counter portion and initiates updating a value of a corresponding second count value stored at the corresponding addressable memory location in the second counter portion. Thus, a combination of the first and second count values provide an instantaneous measure of number of events received.

  8. Space and power efficient hybrid counters array

    DOEpatents

    Gara, Alan G.; Salapura, Valentina

    2010-03-30

    A hybrid counter array device for counting events. The hybrid counter array includes a first counter portion comprising N counter devices, each counter device for receiving signals representing occurrences of events from an event source and providing a first count value corresponding to a lower order bits of the hybrid counter array. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits of the hybrid counter array. A control device monitors each of the N counter devices of the first counter portion and initiates updating a value of a corresponding second count value stored at the corresponding addressable memory location in the second counter portion. Thus, a combination of the first and second count values provide an instantaneous measure of number of events received.

  9. Flexural performance of woven hybrid composites

    NASA Astrophysics Data System (ADS)

    Maslinda, A. B.; Majid, M. S. Abdul; Dan-mallam, Y.; Mazawati, M.

    2016-07-01

    This paper describes the experimental investigation of the flexural performance of natural fiber reinforced polymer composites. Hybrid composites consist of interwoven kenaf/jute and kenaf/hemp fibers was prepared by infusion process using epoxy as polymer matrix. Woven kenaf, jute and hemp composites were also prepared for comparison. Both woven and hybrid composites were subjected to three point flexural test. From the result, bending resistance of hybrid kenaf/jute and kenaf/hemp composites was higher compared to their individual fiber. Hybridization with high strength fiber such as kenaf enhanced the capability of jute and hemp fibers to withstand bending load. Interlocking between yarns in woven fabric make pull out fibers nearly impossible and increase the flexural performance of the hybrid composites.

  10. Evaluation of a Hybrid Elastic EVA Glove

    NASA Technical Reports Server (NTRS)

    Korona, F. Adam; Akin, David

    2002-01-01

    The hybrid elastic design is based upon an American Society for Engineering Education (ASEE) glove designed by at the Space Systems Laboratory (SSL) in 1985. This design uses an elastic restraint layer instead of convolute joints to achieve greater dexterity and mobility during EVA (extravehicular activity). Two pilot studies and a main study were conducted using the hybrid elastic glove and 4000-series EMU (extravehicular activity unit) glove. Data on dexterity performance, joint range of motion, grip strength and perceived exertion was assessed for the EMU and hybrid elastic gloves with correlations to a barehanded condition. During this study, 30 test subjects performed multiple test sessions using a hybrid elastic glove and a 4000- series shuttle glove in a 4.3psid pressure environment. Test results to date indicate that the hybrid elastic glove performance is approximately similar to the performance of the 4000-series glove.

  11. Coumarin hybrids as novel therapeutic agents.

    PubMed

    Sandhu, Sonali; Bansal, Yogita; Silakari, Om; Bansal, Gulshan

    2014-08-01

    Naturally occurring coumarins, having wide spectrum of activities such as antioxidant, anti-inflammatory, anticancer, MAO-B inhibitory and antimicrobial, are frequently used by the researchers to develop novel synthetic and semisynthetic coumarin based therapeutic agents. Many of these agents are hybrid molecules, which are designed through concept of molecular hybridization and have shown multiple pharmacological activities. This multifunctional attribute of these hybrid compounds makes them potential drug candidates for the treatment of multifactorial diseases such as cancer, Alzheimer's disease, metabolic syndromes, AIDS, malaria, and cardiovascular diseases. The present review compiles research reports on development of different coumarin hybrids, classify these on the basis of their therapeutic uses and propose structure-activity relationships. It is intended to help medicinal chemist in designing and synthesizing novel and potent hybrid compounds for the treatment of different disorders. PMID:24934993

  12. Mechanical property characterization of intraply hybrid composites

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Lark, R. F.; Sinclair, J. H.

    1979-01-01

    An investigation of the mechanical properties of intraply hybrids made from graphite fiber/epoxy matrix hybridized with secondary S-glass or Kevlar 49 fiber composites is presented. The specimen stress-strain behavior was determined, showing that mechanical properties of intraply hybrid composites can be measured with available methods such as the ten-degree off-axis test for intralaminar shear, and conventional tests for tensile, flexure, and Izod impact properties. The results also showed that combinations of high modulus graphite/S-glass/epoxy matrix composites exist which yield intraply hybrid laminates with the best 'balanced' properties, and that the translation efficiency of mechanical properties from the constituent composites to intraply hybrids may be assessed with a simple equation.

  13. Ultra-thin microporous/hybrid materials

    DOEpatents

    Jiang, Ying-Bing; Cecchi, Joseph L.; Brinker, C. Jeffrey

    2012-05-29

    Ultra-thin hybrid and/or microporous materials and methods for their fabrication are provided. In one embodiment, the exemplary hybrid membranes can be formed including successive surface activation and reaction steps on a porous support that is patterned or non-patterned. The surface activation can be performed using remote plasma exposure to locally activate the exterior surfaces of porous support. Organic/inorganic hybrid precursors such as organometallic silane precursors can be condensed on the locally activated exterior surfaces, whereby ALD reactions can then take place between the condensed hybrid precursors and a reactant. Various embodiments can also include an intermittent replacement of ALD precursors during the membrane formation so as to enhance the hybrid molecular network of the membranes.

  14. Hybrid selection as a method of increasing mapping power for radiation hybrids.

    PubMed

    Jones, H B

    1996-08-01

    Radiation hybrids have become a widely used tool for physical mapping. A drawback of the technique is that large numbers of hybrids are required to construct robust, high-resolution maps. The information contained within a panel of radiation hybrids is limited by the frequency of retention of chromosomal fragments from the donor cell line. In almost all experiments to date, the retention frequency has been below the optimal level; therefore, many hybrids are needed to produce high-quality maps. Because of the labor-intensive nature of large-scale mapping projects, it is important to make panels as small as possible. One method that has been adopted is to produce initially a large number of hybrids that are all typed with a few loci. Those hybrids showing satisfactorily high retention are admitted to the final panel and the rest are discarded. In this way, a panel of radiation hybrids with higher than expected retention can be created. Methods for conducting such a selection regime are discussed. To investigate the potential advantages of selecting hybrids based on their retention frequency, simulations were run under a variety of conditions. As expected panels with high retention (40%) provided better mapping resources than panels with lower (20%) retention. Beginning with an initial panel of 200 hybrids, comparisons of a random sample of 100 hybrids and the set of those 100 hybrids showing the highest marker retention demonstrated that selection may not be always the best strategy despite the increase in mean retention it yields. The selection of hybrids containing large numbers of fragments leads to an overestimation of the frequency of radiation-induced breaks. When breaks occur with high frequency (for example, when high radiation doses are used), the selection of hybrids leads to a loss of linkage and hence an inability to order the markers. As such, the merits of screening hybrids depends on both the radiation dose and the desired map resolution. PMID:8858351

  15. Hybridization and Selective Release of DNA Microarrays

    SciTech Connect

    Beer, N R; Baker, B; Piggott, T; Maberry, S; Hara, C M; DeOtte, J; Benett, W; Mukerjee, E; Dzenitis, J; Wheeler, E K

    2011-11-29

    DNA microarrays contain sequence specific probes arrayed in distinct spots numbering from 10,000 to over 1,000,000, depending on the platform. This tremendous degree of multiplexing gives microarrays great potential for environmental background sampling, broad-spectrum clinical monitoring, and continuous biological threat detection. In practice, their use in these applications is not common due to limited information content, long processing times, and high cost. The work focused on characterizing the phenomena of microarray hybridization and selective release that will allow these limitations to be addressed. This will revolutionize the ways that microarrays can be used for LLNL's Global Security missions. The goals of this project were two-fold: automated faster hybridizations and selective release of hybridized features. The first study area involves hybridization kinetics and mass-transfer effects. the standard hybridization protocol uses an overnight incubation to achieve the best possible signal for any sample type, as well as for convenience in manual processing. There is potential to significantly shorten this time based on better understanding and control of the rate-limiting processes and knowledge of the progress of the hybridization. In the hybridization work, a custom microarray flow cell was used to manipulate the chemical and thermal environment of the array and autonomously image the changes over time during hybridization. The second study area is selective release. Microarrays easily generate hybridization patterns and signatures, but there is still an unmet need for methodologies enabling rapid and selective analysis of these patterns and signatures. Detailed analysis of individual spots by subsequent sequencing could potentially yield significant information for rapidly mutating and emerging (or deliberately engineered) pathogens. In the selective release work, optical energy deposition with coherent light quickly provides the thermal energy to

  16. Hybrid Composite Cryogenic Tank Structure

    NASA Technical Reports Server (NTRS)

    DeLay, Thomas

    2011-01-01

    A hybrid lightweight composite tank has been created using specially designed materials and manufacturing processes. The tank is produced by using a hybrid structure consisting of at least two reinforced composite material systems. The inner composite layer comprises a distinct fiber and resin matrix suitable for cryogenic use that is a braided-sleeve (and/or a filamentwound layer) aramid fiber preform that is placed on a removable mandrel (outfitted with metallic end fittings) and is infused (vacuum-assisted resin transfer molded) with a polyurethane resin matrix with a high ductility at low temperatures. This inner layer is allowed to cure and is encapsulated with a filamentwound outer composite layer of a distinct fiber resin system. Both inner and outer layer are in intimate contact, and can also be cured at the same time. The outer layer is a material that performs well for low temperature pressure vessels, and it can rely on the inner layer to act as a liner to contain the fluids. The outer layer can be a variety of materials, but the best embodiment may be the use of a continuous tow of carbon fiber (T-1000 carbon, or others), or other high-strength fibers combined with a high ductility epoxy resin matrix, or a polyurethane matrix, which performs well at low temperatures. After curing, the mandrel can be removed from the outer layer. While the hybrid structure is not limited to two particular materials, a preferred version of the tank has been demonstrated on an actual test tank article cycled at high pressures with liquid nitrogen and liquid hydrogen, and the best version is an inner layer of PBO (poly-pphenylenebenzobisoxazole) fibers with a polyurethane matrix and an outer layer of T-1000 carbon with a high elongation epoxy matrix suitable for cryogenic temperatures. A polyurethane matrix has also been used for the outer layer. The construction method is ideal because the fiber and resin of the inner layer has a high strain to failure at cryogenic

  17. Nanorice Particles: Hybrid Plasmonic Nanostructures

    NASA Technical Reports Server (NTRS)

    Wang, Hui (Inventor); Brandl, Daniel (Inventor); Le, Fei (Inventor); Nordlander, Peter (Inventor); Halas, Nancy J. (Inventor)

    2010-01-01

    A new hybrid nanoparticle, i.e., a nanorice particle, which combines the intense local fields of nanorods with the highly tunable plasmon resonances of nanoshells, is described herein. This geometry possesses far greater structural tunability than previous nanoparticle geometries, along with much larger local field enhancements and far greater sensitivity as a surface plasmon resonance (SPR) nanosensor than presently known dielectric-conductive material nanostructures. In an embodiment, a nanoparticle comprises a prolate spheroid-shaped core having a first aspect ratio. The nanoparticle also comprises at least one conductive shell surrounding said prolate spheroid-shaped core. The nanoparticle has a surface plasmon resonance sensitivity of at least 600 nm RIU(sup.-1). Methods of making the disclosed nanorice particles are also described herein.

  18. Hybrid inflation along waterfall trajectories

    SciTech Connect

    Clesse, Sebastien

    2011-03-15

    We identify a new inflationary regime for which more than 60 e-folds are generated classically during the waterfall phase occurring after the usual hybrid inflation. By performing a Bayesian Monte-Carlo-Markov-Chain analysis, this scenario is shown to take place in a large part of the parameter space of the model. When this occurs, the observable perturbation modes leave the Hubble radius during waterfall inflation. The power spectrum of adiabatic perturbations is red, possibly in agreement with CMB constraints. Particular attention has been given to study only the regions for which quantum backreactions do not affect the classical dynamics. Implications concerning the preheating and the absence of topological defects in our Universe are discussed.

  19. Optoplasmonics: hybridization in 3D

    NASA Astrophysics Data System (ADS)

    Rosa, L.; Gervinskas, G.; Žukauskas, A.; Malinauskas, M.; Brasselet, E.; Juodkazis, S.

    2013-12-01

    Femtosecond laser fabrication has been used to make hybrid refractive and di ractive micro-optical elements in photo-polymer SZ2080. For applications in micro- uidics, axicon lenses were fabricated (both single and arrays), for generation of light intensity patterns extending through the entire depth of a typically tens-of-micrometers deep channel. Further hybridisation of an axicon with a plasmonic slot is fabricated and demonstrated nu- merically. Spiralling chiral grooves were inscribed into a 100-nm-thick gold coating sputtered over polymerized micro-axicon lenses, using a focused ion beam. This demonstrates possibility of hybridisation between optical and plasmonic 3D micro-optical elements. Numerical modelling of optical performance by 3D-FDTD method is presented.

  20. Hybrid Multifoil Aerogel Thermal Insulation

    NASA Technical Reports Server (NTRS)

    Sakamoto, Jeffrey; Paik, Jong-Ah; Jones, Steven; Nesmith, Bill

    2008-01-01

    This innovation blends the merits of multifoil insulation (MFI) with aerogel-based insulation to develop a highly versatile, ultra-low thermally conductive material called hybrid multifoil aerogel thermal insulation (HyMATI). The density of the opacified aerogel is 240 mg/cm3 and has thermal conductivity in the 20 mW/mK range in high vacuum and 25 mW/mK in 1 atmosphere of gas (such as argon) up to 800 C. It is stable up to 1,000 C. This is equal to commercially available high-temperature thermal insulation. The thermal conductivity of the aerogel is 36 percent lower compared to several commercially available insulations when tested in 1 atmosphere of argon gas up to 800 C.

  1. Engineering semiconductor hybrids for sensing

    NASA Astrophysics Data System (ADS)

    Gumbs, Godfrey; Iurov, Andrii; Huang, Danhong

    2016-06-01

    The effect of screening of the coulomb interaction between two layers of two-dimensional electrons, such as in graphene, by a highly doped semiconducting substrate is investigated. We employ the random-phase approximation to calculate the dispersion equation of this hybrid structure in order to determine the plasmon excitation spectrum. When an electric current is passed through a layer, the low-frequency plasmons in the layer may bifurcate into separate streams due to the current-driving effect. At a critical wave vector, determined by the separation between layers and their distance from the surface, their phase velocities may be in opposite directions and a surface plasmon instability leads to the emission of radiation. Applications to detectors and other electromagnetic devices exploiting nano-plasmonics are discussed.

  2. Hybrid Epithelioid Schwannoma/Perineurioma.

    PubMed

    Kacerovska, Denisa; Michal, Michal; Kazakov, Dmitry V

    2016-07-01

    We report a case of a 58-year-old who woman presented with a solitary slowly growing subcutaneous nodule covered by normally appearing skin on her left groin. Microscopically, the lesion was well circumscribed but unencapsulated, and showed biphasic cellular differentiation. One cell population was presented by small rounded (epithelioid) cells arranged singly, in small aggregates or short cords, whereas the second one was composed of cells with slender nuclei and delicate elongated bipolar cytoplasmic processes. On immunohistochemistry, the epithelioid component showed positive reaction for S-100 protein and negative for epithelial membrane antigen (EMA), thus compatible with schwannian differentiation and resembling epithelioid schwannoma. The other component showed a reverse immunophenotype being S-100 protein negative and EMA positive, thus corresponding to perineuriomatous differentiation. The clinicopathologic and immunohistochemical features of the lesion were compatible with hybrid epithelioid schwannoma/perineurioma, a rare morphological variant of peripheral nerve sheath tumors. PMID:26863063

  3. Stellarmak a hybrid stellarator: Spheromak

    SciTech Connect

    Hartman, C.W.

    1980-01-04

    This paper discusses hybridization of modified Stellarator-like transform windings (T-windings) with a Spheromak or Field-Reversed-Mirror configuration. This configuration, Stellarmak, retains the important topological advantage of the Spheromak or FRM of having no plasma linking conductors or blankets. The T-windings provide rotational transformation in toroidal angle of the outer poloidal field lines, in effect creating a reversed B/sub Toroidal/ Spheromak or adding average B/sub T/ to the FRM producing higher shear, increased limiting ..beta.., and possibly greater stability to kinks and tilt. The presence of field ripple in the toroidal direction may be sufficient to inhibit cancellation of directed ion current by electron drag to allow steady state operation with the toroidal as well as poloidal current maintained by neutral beams.

  4. Quantum photonics hybrid integration platform

    SciTech Connect

    Murray, E.; Floether, F. F.; Ellis, D. J. P.; Meany, T.; Bennett, A. J. Shields, A. J.; Lee, J. P.; Griffiths, J. P.; Jones, G. A. C.; Farrer, I.; Ritchie, D. A.

    2015-10-26

    Fundamental to integrated photonic quantum computing is an on-chip method for routing and modulating quantum light emission. We demonstrate a hybrid integration platform consisting of arbitrarily designed waveguide circuits and single-photon sources. InAs quantum dots (QD) embedded in GaAs are bonded to a SiON waveguide chip such that the QD emission is coupled to the waveguide mode. The waveguides are SiON core embedded in a SiO{sub 2} cladding. A tuneable Mach Zehnder interferometer (MZI) modulates the emission between two output ports and can act as a path-encoded qubit preparation device. The single-photon nature of the emission was verified using the on-chip MZI as a beamsplitter in a Hanbury Brown and Twiss measurement.

  5. Heterogeneous fuel for hybrid rocket

    NASA Technical Reports Server (NTRS)

    Stickler, David B. (Inventor)

    1996-01-01

    Heterogeneous fuel compositions suitable for use in hybrid rocket engines and solid-fuel ramjet engines, The compositions include mixtures of a continuous phase, which forms a solid matrix, and a dispersed phase permanently distributed therein. The dispersed phase or the matrix vaporizes (or melts) and disperses into the gas flow much more rapidly than the other, creating depressions, voids and bumps within and on the surface of the remaining bulk material that continuously roughen its surface, This effect substantially enhances heat transfer from the combusting gas flow to the fuel surface, producing a correspondingly high burning rate, The dispersed phase may include solid particles, entrained liquid droplets, or gas-phase voids having dimensions roughly similar to the displacement scale height of the gas-flow boundary layer generated during combustion.

  6. Acoustic metasurface with hybrid resonances.

    PubMed

    Ma, Guancong; Yang, Min; Xiao, Songwen; Yang, Zhiyu; Sheng, Ping

    2014-09-01

    An impedance-matched surface has the property that an incident wave generates no reflection. Here we demonstrate that by using a simple construction, an acoustically reflecting surface can acquire hybrid resonances and becomes impedance-matched to airborne sound at tunable frequencies, such that no reflection is generated. Each resonant cell of the metasurface is deep-subwavelength in all its spatial dimensions, with its thickness less than the peak absorption wavelength by two orders of magnitude. As there can be no transmission, the impedance-matched acoustic wave is hence either completely absorbed at one or multiple frequencies, or converted into other form(s) of energy, such as an electrical current. A high acoustic-electrical energy conversion efficiency of 23% is achieved. PMID:24880731

  7. Construction of radiation hybrid panels.

    PubMed

    Page, John E; Murphy, William J

    2008-01-01

    Whole-genome radiation hybrid (RH) mapping has proven to be a powerful tool for mapping genes and comparing genome architecture. We describe a protocol for constructing RH panels by rescuing irradiated fibroblast donor cells of any mammalian species by polyethylene glycol fusion to a thymidine kinase-deficient hamster cell line. Characterization and expansion of a panel of 90-100 cell lines can be used to map virtually any PCR-based marker that can be distinguished from the recipient hamster genome. The described procedure has been used successfully to create RH panels from diverse mammalian species such as macaques, elephants, alpacas, and armadillos, and may be applicable to nonmammalian vertebrates as well. PMID:18629660

  8. An IIR median hybrid filter

    NASA Technical Reports Server (NTRS)

    Bauer, Peter H.; Sartori, Michael A.; Bryden, Timothy M.

    1992-01-01

    A new class of nonlinear filters, the so-called class of multidirectional infinite impulse response median hybrid filters, is presented and analyzed. The input signal is processed twice using a linear shift-invariant infinite impulse response filtering module: once with normal causality and a second time with inverted causality. The final output of the MIMH filter is the median of the two-directional outputs and the original input signal. Thus, the MIMH filter is a concatenation of linear filtering and nonlinear filtering (a median filtering module). Because of this unique scheme, the MIMH filter possesses many desirable properties which are both proven and analyzed (including impulse removal, step preservation, and noise suppression). A comparison to other existing median type filters is also provided.

  9. Permutation on hybrid natural inflation

    NASA Astrophysics Data System (ADS)

    Carone, Christopher D.; Erlich, Joshua; Ramos, Raymundo; Sher, Marc

    2014-09-01

    We analyze a model of hybrid natural inflation based on the smallest non-Abelian discrete group S3. Leading invariant terms in the scalar potential have an accidental global symmetry that is spontaneously broken, providing a pseudo-Goldstone boson that is identified as the inflaton. The S3 symmetry restricts both the form of the inflaton potential and the couplings of the inflaton field to the waterfall fields responsible for the end of inflation. We identify viable points in the model parameter space. Although the power in tensor modes is small in most of the parameter space of the model, we identify parameter choices that yield potentially observable values of r without super-Planckian initial values of the inflaton field.

  10. Dark energy in hybrid inflation

    SciTech Connect

    Gong, Jinn-Ouk; Kim, Seongcheol

    2007-03-15

    The situation that a scalar field provides the source of the accelerated expansion of the Universe while rolling down its potential is common in both the simple models of the primordial inflation and the quintessence-based dark energy models. Motivated by this point, we address the possibility of causing the current acceleration via the primordial inflation using a simple model based on hybrid inflation. We trigger the onset of the motion of the quintessence field via the waterfall field, and find that the fate of the Universe depends on the true vacuum energy determined by choosing the parameters. We also briefly discuss the variation of the equation of state and the possible implementation of our scenario in supersymmetric theories.

  11. Sensitivity, Specificity, and the Hybridization Isotherms of DNA Chips

    PubMed Central

    Halperin, A.; Buhot, A.; Zhulina, E.B.

    2004-01-01

    Competitive hybridization, at the surface and in the bulk, lowers the sensitivity of DNA chips. Competitive surface hybridization occurs when different targets can hybridize with the same probe. Competitive bulk hybridization takes place when the targets can hybridize with free complementary chains in the solution. The effects of competitive hybridization on the thermodynamically attainable performance of DNA chips are quantified in terms of the hybridization isotherms of the spots. These relate the equilibrium degree of the hybridization to the bulk composition. The hybridization isotherm emerges as a Langmuir isotherm modified for electrostatic interactions within the probe layer. The sensitivity of the assay in equilibrium is directly related to the slope of the isotherm. A simpler description is possible, in terms of c50 values specifying the bulk composition corresponding to 50% hybridization at the surface. The effects of competitive hybridization are important for the quantitative analysis of DNA chip results, especially when used to study point mutations. PMID:14747310

  12. Hybrid electric vehicles in Europe and Japan

    SciTech Connect

    Wyczalek, F.A.

    1996-12-31

    Beginning in 1990, the major automotive passenger vehicle manufacturers once again reexamined the battery powered electric vehicle (EV). This intensive effort to reduce the battery EV to commercial practice focused attention on the key issue of limited vehicle range, resulting from the low energy density and high mass characteristics of batteries, in comparison to liquid hydrocarbon fuels. Consequently, by 1995, vehicle manufacturers turned their attention to hybrid electric vehicles (HEV). This redirection of EV effort is highlighted by the focus on experimental hybrid EV displayed at the 1995 Frankfurt Motor Show and the Tokyo Motor Show in Japan. In Europe the 56th IAA in Frankfurt included twelve or more EV designed for personnel transportation, and among them, two featured hybrid-electric (HEV) systems: the Peugeot turboelectric HEV, and the Opel Ermscher Selectra HEV. In Japan, at the 31st Tokyo Motor Show, among the twenty or more EV on display, seven were hybrid HEV by: Daihatsu, Mitsubishi, Toyota: and, the Suburu, Suzuki, and the Kia KEV4 parallel type HEV. This paper presents a comparative analysis of the key features of these hybrid propulsion systems. Among the conclusions, two issues are evident: one, the focus is on series-type hybrid systems, with the exception of the parallel Suburu and Suzuki HEV, and, two, the major manufacturers are turning to the hybrid concept in their search for solutions to two key EV Issues: limited driving range; and, heating and air conditioning, associated with the low energy density characteristic of batteries.

  13. Current Status of Hybrid Bearing Damage Detection

    NASA Technical Reports Server (NTRS)

    Dempsey, Paula J.; Certo, Joseph M.; Morales, Wilfredo

    2004-01-01

    Advances in material development and processing have led to the introduction of ceramic hybrid bearings for many applications. The introduction of silicon nitride hybrid bearings into the high pressure oxidizer turbopump, on the space shuttle main engine, led NASA to solve a highly persistent and troublesome bearing problem. Hybrid bearings consist of ceramic balls and steel races. The majority of hybrid bearings utilize Si3N4 balls. The aerospace industry is currently studying the use of hybrid bearings and naturally the failure modes of these bearings become an issue in light of the limited data available. In today s turbine engines and helicopter transmissions, the health of the bearings is detected by the properties of the debris found in the lubrication line when damage begins to occur. Current oil debris sensor technology relies on the magnetic properties of the debris to detect damage. Since the ceramic rolling elements of hybrid bearings have no metallic properties, a new sensing system must be developed to indicate the system health if ceramic components are to be safely implemented in aerospace applications. The ceramic oil debris sensor must be capable of detecting ceramic and metallic component damage with sufficient reliability and forewarning to prevent a catastrophic failure. The objective of this research is to provide a background summary on what is currently known about hybrid bearing failure modes and to report preliminary results on the detection of silicon nitride debris, in oil, using a commercial particle counter.

  14. Hybrid mesh for nasal airflow studies.

    PubMed

    Zubair, Mohammed; Abdullah, Mohammed Zulkifly; Ahmad, Kamarul Arifin

    2013-01-01

    The accuracy of the numerical result is closely related to mesh density as well as its distribution. Mesh plays a very significant role in the outcome of numerical simulation. Many nasal airflow studies have employed unstructured mesh and more recently hybrid mesh scheme has been utilized considering the complexity of anatomical architecture. The objective of this study is to compare the results of hybrid mesh with unstructured mesh and study its effect on the flow parameters inside the nasal cavity. A three-dimensional nasal cavity model is reconstructed based on computed tomographic images of a healthy Malaysian adult nose. Navier-Stokes equation for steady airflow is solved numerically to examine inspiratory nasal flow. The pressure drop obtained using the unstructured computational grid is about 22.6 Pa for a flow rate of 20 L/min, whereas the hybrid mesh resulted in 17.8 Pa for the same flow rate. The maximum velocity obtained at the nasal valve using unstructured grid is 4.18 m/s and that with hybrid mesh is around 4.76 m/s. Hybrid mesh reported lower grid convergence index (GCI) than the unstructured mesh. Significant differences between unstructured mesh and hybrid mesh are determined highlighting the usefulness of hybrid mesh for nasal airflow studies. PMID:23983811

  15. Hybrid Mesh for Nasal Airflow Studies

    PubMed Central

    Zubair, Mohammed; Abdullah, Mohammed Zulkifly; Ahmad, Kamarul Arifin

    2013-01-01

    The accuracy of the numerical result is closely related to mesh density as well as its distribution. Mesh plays a very significant role in the outcome of numerical simulation. Many nasal airflow studies have employed unstructured mesh and more recently hybrid mesh scheme has been utilized considering the complexity of anatomical architecture. The objective of this study is to compare the results of hybrid mesh with unstructured mesh and study its effect on the flow parameters inside the nasal cavity. A three-dimensional nasal cavity model is reconstructed based on computed tomographic images of a healthy Malaysian adult nose. Navier-Stokes equation for steady airflow is solved numerically to examine inspiratory nasal flow. The pressure drop obtained using the unstructured computational grid is about 22.6 Pa for a flow rate of 20 L/min, whereas the hybrid mesh resulted in 17.8 Pa for the same flow rate. The maximum velocity obtained at the nasal valve using unstructured grid is 4.18 m/s and that with hybrid mesh is around 4.76 m/s. Hybrid mesh reported lower grid convergence index (GCI) than the unstructured mesh. Significant differences between unstructured mesh and hybrid mesh are determined highlighting the usefulness of hybrid mesh for nasal airflow studies. PMID:23983811

  16. Hybrid boosters for future launch vehicles

    NASA Astrophysics Data System (ADS)

    Dargies, E.; Lo, R. E.

    There is a striking similarity in the design of the US Space Transportation System, the European ARI-ANE 5P and the Japanese II-II: they all use a high energy cryogenic core stage along with two large solid propellant rocket boosters (SRB's) in order to provide for a high lift-off thrust level. Prior to last years disasters with Challenger and Titan it was widely held that SRB's were cheap, uncomplicated and safe. Even before the revelation by these accidents of severe safety hazards, shuttle operations demonstrated that the SRB's were by no means as cheap as reusable systems ought to be. In addition, they became known as sources of considerable environmental pollution. In contrast, hybrid rocket propulsion systems offer the following potential advantages: • much higher savety level (TNT equivalent almost zero, shut-down capability in case of ignition failure of one unit, inert against unbonding) • choice of non-toxic propellant combinations • equal or higher specific performance For these reasons, system analysis were carried out to examine hybrids as potential alternative to SRB's. Various analytical tools (mass- and performance models, trajectory simulation etc.) were developed for parametrical studies of hybrid propulsion systems. Special attention was devoted to the well-known primary concern of hybrids: geometrical design of the solid fuel grain and regression rate of the ablating surface. Experimental data were used as input wherever possible. In 1985 first studies were carried out to find possible fields of application for hybrid rocket engines. A mass model and a performance model for hybrid rocket motors were developed, taking into account the peculiarities of hybrid combustion as there are i.e. low regression rate and shifting mixture ratio during operation. After some analytical work was done, hybrids proved to be a promising alternative to SRB's. Compared with solids, hybrids offer many advantages.

  17. Hybrid options for light-duty vehicles.

    SciTech Connect

    An, F., Stodolsky, F.; Santini, D.

    1999-07-19

    Hybrid electric vehicles (HEVs) offer great promise in improving fuel economy. In this paper, we analyze why, how, and by how much vehicle hybridization can reduce energy consumption and improve fuel economy. Our analysis focuses on efficiency gains associated solely with vehicle hybridization. We do not consider such other measures as vehicle weight reduction or air- and tire-resistance reduction, because such measures would also benefit conventional technology vehicles. The analysis starts with understanding the energy inefficiencies of light-duty vehicles associated with different operation modes in US and Japanese urban and highway driving cycles, with the corresponding energy-saving potentials. The potential for fuel economy gains due to vehicle hybridization can be estimated almost exclusively on the basis of three elements: the reducibility of engine idling operation, the recoverability of braking energy losses, and the capability of improving engine load profiles to gain efficiency associated with specific HEV configurations and control strategies. Specifically, we evaluate the energy efficiencies and fuel economies of a baseline MY97 Corolla-like conventional vehicle (CV), a hypothetical Corolla-based minimal hybrid vehicle (MHV), and a MY98 Prius-like full hybrid vehicle (FHV). We then estimate energy benefits of both MHVs and FHVs over CVs on a performance-equivalent basis. We conclude that the energy benefits of hybridization vary not only with test cycles, but also with performance requirements. The hybrid benefits are greater for ''Corolla (high) performance-equivalent'' vehicles than for ''Prius (low) performance-equivalent'' vehicles. An increasing acceleration requirement would result in larger fuel economy benefits from vehicle hybridization.

  18. Production of interspecific hybrids in ornamental plants.

    PubMed

    Kato, Juntaro; Mii, Masahiro

    2012-01-01

    In breeding of ornamental plants, interspecific hybridization and polyploidization have successfully been used to produce novel cultivars with blended traits of both parents and to introgress useful traits of one species to another. Embryo rescue techniques and molecular cytogenetic methods have successfully been used to produce and characterize interspecific hybrids in various genera. In this paper, recent advances in interspecific hybridization are described based on the results obtained in Primula, Cosmos, and Kalanchoe with special references to the use of embryo culture techniques for rescuing the abortive hybrid embryos. The methods for production and characterization of interspecific hybrids are categorized into three steps, i.e., (1) pollination, (2) rescue culture of immature embryo, and (3) confirmation of hybridity and ploidy level of the plants obtained. For interspecific crosses, emasculation step is usually needed to avoid self-pollination even in the genera with self-incompatibility system, such as Primula and Cosmos, since self-incompatibility is not always complete. Since interspecific crosses are usually hindered by various cross-incompatibility mechanisms, successful production of interspecific hybrids could be achieved only from limited crosses among those using many cultivars/strains of both parents, suggesting the importance of the selection of the compatible genotypes. Unilateral cross incompatibility is commonly observed in interspecific cross combinations, so reciprocal crosses should be conducted as an indispensable step. At the rescue culture step, addition of plant hormones, e.g., auxin cytokinin and gibberellin, to the culture medium at the appropriate concentrations is proved to be effective and necessary. The hybridity of the plants is efficiently confirmed at the seedling stage by DNA analysis in addition to the observation of morphological characters. The analysis of relative DNA contents by flow cytometry is an easy and rapid means

  19. Hybrid Approaches for Complex Parastomal Hernia Repair.

    PubMed

    Zhang, Heng; Xie, Jia-Ming; Miao, Jian-Qing; Wu, Hao-Rong

    2016-01-01

    Parastomal hernia is one of the major complications of colostomy with high occurrence. From October 2011 to November 2014, a retrospective study was conducted by analyzing and following up data of 16 patients suffering from parastomal hernia who underwent a hybrid technique repair. The safety and efficacy of the hybrid technique for parastomal hernia repair was investigated in terms of complications. All cases were operated successfully and had no major immediate postoperative complications other than mild abdominal pain in 5 cases. No long-term postoperative complications were reported in the follow-up. The authors found hybrid technique to be safe and effective for parastomal hernia repair with fewer complications. PMID:26787038

  20. Advanced propulsion system concept for hybrid vehicles

    NASA Technical Reports Server (NTRS)

    Bhate, S.; Chen, H.; Dochat, G.

    1980-01-01

    A series hybrid system, utilizing a free piston Stirling engine with a linear alternator, and a parallel hybrid system, incorporating a kinematic Stirling engine, are analyzed for various specified reference missions/vehicles ranging from a small two passenger commuter vehicle to a van. Parametric studies for each configuration, detail tradeoff studies to determine engine, battery and system definition, short term energy storage evaluation, and detail life cycle cost studies were performed. Results indicate that the selection of a parallel Stirling engine/electric, hybrid propulsion system can significantly reduce petroleum consumption by 70 percent over present conventional vehicles.

  1. Fuzzy Hybrid Deliberative/Reactive Paradigm (FHDRP)

    NASA Technical Reports Server (NTRS)

    Sarmadi, Hengameth

    2004-01-01

    This work aims to introduce a new concept for incorporating fuzzy sets in hybrid deliberative/reactive paradigm. After a brief review on basic issues of hybrid paradigm the definition of agent-based fuzzy hybrid paradigm, which enables the agents to proceed and extract their behavior through quantitative numerical and qualitative knowledge and to impose their decision making procedure via fuzzy rule bank, is discussed. Next an example performs a more applied platform for the developed approach and finally an overview of the corresponding agents architecture enhances agents logical framework.

  2. Powertrain system for a hybrid electric vehicle

    DOEpatents

    Reed, Jr., Richard G.; Boberg, Evan S.; Lawrie, Robert E.; Castaing, Francois J.

    1999-08-31

    A hybrid electric powertrain system is provided including an electric motor/generator drivingly engaged with the drive shaft of a transmission. The electric is utilized for synchronizing the rotation of the drive shaft with the driven shaft during gear shift operations. In addition, a mild hybrid concept is provided which utilizes a smaller electric motor than typical hybrid powertrain systems. Because the electric motor is drivingly engaged with the drive shaft of the transmission, the electric motor/generator is driven at high speed even when the vehicle speed is low so that the electric motor/generator provides more efficient regeneration.

  3. Checkpointing for a hybrid computing node

    DOEpatents

    Cher, Chen-Yong

    2016-03-08

    According to an aspect, a method for checkpointing in a hybrid computing node includes executing a task in a processing accelerator of the hybrid computing node. A checkpoint is created in a local memory of the processing accelerator. The checkpoint includes state data to restart execution of the task in the processing accelerator upon a restart operation. Execution of the task is resumed in the processing accelerator after creating the checkpoint. The state data of the checkpoint are transferred from the processing accelerator to a main processor of the hybrid computing node while the processing accelerator is executing the task.

  4. Powertrain system for a hybrid electric vehicle

    DOEpatents

    Reed, R.G. Jr.; Boberg, E.S.; Lawrie, R.E.; Castaing, F.J.

    1999-08-31

    A hybrid electric powertrain system is provided including an electric motor/generator drivingly engaged with the drive shaft of a transmission. The electric is utilized for synchronizing the rotation of the drive shaft with the driven shaft during gear shift operations. In addition, a mild hybrid concept is provided which utilizes a smaller electric motor than typical hybrid powertrain systems. Because the electric motor is drivingly engaged with the drive shaft of the transmission, the electric motor/generator is driven at high speed even when the vehicle speed is low so that the electric motor/generator provides more efficient regeneration. 34 figs.

  5. Interspecific hybridization between greater kudu and nyala.

    PubMed

    Dalton, Desiré L; Tordiffe, Adrian; Luther, Ilse; Duran, Assumpta; van Wyk, Anna M; Brettschneider, Helene; Oosthuizen, Almero; Modiba, Catherine; Kotzé, Antoinette

    2014-06-01

    Hybridization of wildlife species, even in the absence of introgression, is of concern due to wasted reproductive effort and a reduction in productivity. In this study we detail an accidental mating between a female nyala (Tragelaphus angasii) and a male greater kudu (T. strepsiceros). The hybrid was phenotypically nyala and was identified as such based on mitochondrial DNA. Further genetic analysis based on nine microsatellite markers, chromosome number and chromosome morphology however, confirmed its status as an F1 hybrid. Results obtained from a reproductive potential assessment indicated that this animal does not have the potential to breed successfully and can be considered as sterile. PMID:24906427

  6. Electrical potential-assisted DNA hybridization. How to mitigate electrostatics for surface DNA hybridization.

    PubMed

    Tymoczko, Jakub; Schuhmann, Wolfgang; Gebala, Magdalena

    2014-12-24

    Surface-confined DNA hybridization reactions are sensitive to the number and identity of DNA capture probes and experimental conditions such as the nature and the ionic strength of the electrolyte solution. When the surface probe density is high or the concentration of bulk ions is much lower than the concentration of ions within the DNA layer, hybridization is significantly slowed down or does not proceed at all. However, high-density DNA monolayers are attractive for designing high-sensitivity DNA sensors. Thus, circumventing sluggish DNA hybridization on such interfaces allows a high surface concentration of target DNA and improved signal/noise ratio. We present potential-assisted hybridization as a strategy in which an external voltage is applied to the ssDNA-modified interface during the hybridization process. Results show that a significant enhancement of hybridization can be achieved using this approach. PMID:25102381

  7. 17 CFR 34.3 - Hybrid instrument exemption.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... meaning of 12 CFR 204.2 (b)(1), (c)(1) and (e), respectively, offered by an insured depository institution... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Hybrid instrument exemption... OF HYBRID INSTRUMENTS § 34.3 Hybrid instrument exemption. (a) A hybrid instrument is exempt from...

  8. Hybrid catfish offers performance advantages for US catfish farmers

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Channel x blue hybrid catfish is the only hybrid among 28 interspecific hybrid crosses and backcrosses evaluated within the family Ictaluridae to exhibit dominant traits desirable for intensive aquaculture. In a 2004 pond trial, hybrid catfish outperformed channel catfish in all the production trai...

  9. Hybrid lipid-based nanostructures

    NASA Astrophysics Data System (ADS)

    Dayani, Yasaman

    Biological membranes serve several important roles, such as structural support of cells and organelles, regulation of ionic and molecular transport, barriers to non-mediated transport, contact between cells within tissues, and accommodation of membrane proteins. Membrane proteins and other vital biomolecules incorporated into the membrane need a lipid membrane to function. Due to importance of lipid bilayers and their vital function in governing many processes in the cell, the development of various models as artificial lipid membranes that can mimic cell membranes has become a subject of great interest. Using different models of artificial lipid membranes, such as liposomes, planar lipid bilayers and supported or tethered lipid bilayers, we are able to study many biophysical processes in biological membranes. The ability of different molecules to interact with and change the structure of lipid membranes can be also investigated in artificial lipid membranes. An important application of lipid bilayer-containing interfaces is characterization of novel membrane proteins for high throughput drug screening studies to investigate receptor-drug interactions and develop biosensor systems. Membrane proteins need a lipid bilayer environment to preserve their stability and functionality. Fabrication of materials that can interact with biomolecules like proteins necessitates the use of lipid bilayers as a mimic of cell membranes. The objective of this research is to develop novel hybrid lipid-based nanostructures mimicking biological membranes. Toward this aim, two hybrid biocompatible structures are introduced: lipid bilayer-coated multi-walled carbon nanotubes (MWCNTs) and hydrogel-anchored liposomes with double-stranded DNA anchors. These structures have potential applications in biosensing, drug targeting, drug delivery, and biophysical studies of cell membranes. In the first developed nanostructure, lipid molecules are covalently attached to the surfaces of MWCNTs, and

  10. Techno-economic comparison of series hybrid, plug-in hybrid, fuel cell and regular cars

    NASA Astrophysics Data System (ADS)

    van Vliet, Oscar P. R.; Kruithof, Thomas; Turkenburg, Wim C.; Faaij, André P. C.

    We examine the competitiveness of series hybrid compared to fuel cell, parallel hybrid, and regular cars. We use public domain data to determine efficiency, fuel consumption, total costs of ownership and greenhouse gas emissions resulting from drivetrain choices. The series hybrid drivetrain can be seen both as an alternative to petrol, diesel and parallel hybrid cars, as well as an intermediate stage towards fully electric or fuel cell cars. We calculate the fuel consumption and costs of four diesel-fuelled series hybrid, four plug-in hybrid and four fuel cell car configurations, and compared these to three reference cars. We find that series hybrid cars may reduce fuel consumption by 34-47%, but cost €5000-12,000 more. Well-to-wheel greenhouse gas emissions may be reduced to 89-103 g CO 2 km -1 compared to reference petrol (163 g km -1) and diesel cars (156 g km -1). Series hybrid cars with wheel motors have lower weight and 7-21% lower fuel consumption than those with central electric motors. The fuel cell car remains uncompetitive even if production costs of fuel cells come down by 90%. Plug-in hybrid cars are competitive when driving large distances on electricity, and/or if cost of batteries come down substantially. Well-to-wheel greenhouse gas emissions may be reduced to 60-69 g CO 2 km -1.

  11. The Drosophila melanogaster hybrid male rescue gene causes inviability in male and female species hybrids.

    PubMed Central

    Barbash, D A; Roote, J; Ashburner, M

    2000-01-01

    The Drosophila melanogaster mutation Hmr rescues inviable hybrid sons from the cross of D. melanogaster females to males of its sibling species D. mauritiana, D. simulans, and D. sechellia. We have extended previous observations that hybrid daughters from this cross are poorly viable at high temperatures and have shown that this female lethality is suppressed by Hmr and the rescue mutations In(1)AB and D. simulans Lhr. Deficiencies defined here as Hmr(-) also suppressed lethality, demonstrating that reducing Hmr(+) activity can rescue otherwise inviable hybrids. An Hmr(+) duplication had the opposite effect of reducing the viability of female and sibling X-male hybrid progeny. Similar dose-dependent viability effects of Hmr were observed in the reciprocal cross of D. simulans females to D. melanogaster males. Finally, Lhr and Hmr(+) were shown to have mutually antagonistic effects on hybrid viability. These data suggest a model where the interaction of sibling species Lhr(+) and D. melanogaster Hmr(+) causes lethality in both sexes of species hybrids and in both directions of crossing. Our results further suggest that a twofold difference in Hmr(+) dosage accounts in part for the differential viability of male and female hybrid progeny, but also that additional, unidentified genes must be invoked to account for the invariant lethality of hybrid sons of D. melanogaster mothers. Implications of our findings for understanding Haldane's rule-the observation that hybrid breakdown is often specific to the heterogametic sex-are also discussed. PMID:10747067

  12. Nuclear thermal/nuclear electric hybrids

    NASA Technical Reports Server (NTRS)

    Reid, B. D.

    1991-01-01

    A description is given of the nuclear thermal and nuclear electric hybrid. The specifications are described along with its mission performance. Next, the technical status, development requirements, and some cost estimates are provided.

  13. Automated DNA electrophoresis, hybridization and detection

    SciTech Connect

    Zapolski, E.J.; Gersten, D.M.; Golab, T.J.; Ledley, R.S.

    1986-05-01

    A fully automated, computer controlled system for nucleic acid hybridization analysis has been devised and constructed. In practice, DNA is digested with restriction endonuclease enzyme(s) and loaded into the system by pipette; /sup 32/P-labelled nucleic acid probe(s) is loaded into the nine hybridization chambers. Instructions for all the steps in the automated process are specified by answering questions that appear on the computer screen at the start of the experiment. Subsequent steps are performed automatically. The system performs horizontal electrophoresis in agarose gel, fixed the fragments to a solid phase matrix, denatures, neutralizes, prehybridizes, hybridizes, washes, dries and detects the radioactivity according to the specifications given by the operator. The results, printed out at the end, give the positions on the matrix to which radioactivity remains hybridized following stringent washing.

  14. Labscale testing techniques for hybrid rockets

    NASA Astrophysics Data System (ADS)

    Hollman, S. L.; Frederick, R. A., Jr.

    1993-06-01

    The objective of this work is to provide an overview of labscale testing techniques used for the testing of hybrid rocket motors. The hybrid rocket motor uses a solid fuel and a gaseous or liquid oxidizer. The review summarizes the important features of past U.S. testing, identifies key references, and assesses the relevance of the laboratory data to larger scale motors. The results show that important parameters can be observed through labscale testing of hybrid rockets. This may allow for proving theories and testing materials. The conclusions are that labscale testing is important in understanding the behavior of the hybrid rocket and in improving its performance, but additional work is needed in experiment design.

  15. Facultative mate choice drives adaptive hybridization.

    PubMed

    Pfennig, Karin S

    2007-11-01

    Mating with another species (hybridization) is often maladaptive. Consequently, females typically avoid heterospecifics as mates. Contrary to these expectations, female spadefoot toads were more likely to choose heterospecific males when exposed to environmental conditions that favor hybridization. Indeed, those females with phenotypic characteristics for which hybridization is most favorable were most likely to switch from choosing conspecifics to heterospecifics. Moreover, environmentally dependent mate choice has evolved only in populations and species that risk engaging in, and can potentially benefit from, hybridization. Thus, when the benefits of mate choice vary, females may radically alter their mate selection in response to their own phenotype and their environment, even to the point of choosing males of other species. PMID:17991861

  16. Control system for a hybrid powertrain system

    DOEpatents

    Naqvi, Ali K.; Demirovic, Besim; Gupta, Pinaki; Kaminsky, Lawrence A.

    2014-09-09

    A vehicle includes a powertrain with an engine, first and second torque machines, and a hybrid transmission. A method for operating the vehicle includes operating the engine in an unfueled state, releasing an off-going clutch which when engaged effects operation of the hybrid transmission in a first continuously variable mode, and applying a friction braking torque to a wheel of the vehicle to compensate for an increase in an output torque of the hybrid transmission resulting from releasing the off-going clutch. Subsequent to releasing the off-going clutch, an oncoming clutch which when engaged effects operation of the hybrid transmission in a second continuously variable mode is synchronized. Subsequent to synchronization of the oncoming clutch, the oncoming clutch is engaged.

  17. Hybrid slab-microchannel gel electrophoresis system

    DOEpatents

    Balch, J.W.; Carrano, A.V.; Davidson, J.C.; Koo, J.C.

    1998-05-05

    A hybrid slab-microchannel gel electrophoresis system is described. The hybrid system permits the fabrication of isolated microchannels for biomolecule separations without imposing the constraint of a totally sealed system. The hybrid system is reusable and ultimately much simpler and less costly to manufacture than a closed channel plate system. The hybrid system incorporates a microslab portion of the separation medium above the microchannels, thus at least substantially reducing the possibility of non-uniform field distribution and breakdown due to uncontrollable leakage. A microslab of the sieving matrix is built into the system by using plastic spacer materials and is used to uniformly couple the top plate with the bottom microchannel plate. 4 figs.

  18. Plug-in integrated/hybrid circuit

    NASA Technical Reports Server (NTRS)

    Stringer, E. J.

    1974-01-01

    Hybrid circuitry can be installed into standard round bayonet connectors, to eliminate wiring from connector to circuit. Circuits can be connected directly into either section of connector pair, eliminating need for hard wiring to that section.

  19. Superconducting-semiconducting nanowire hybrid microwave circuits

    NASA Astrophysics Data System (ADS)

    de Lange, G.; van Heck, B.; Bruno, A.; van Woerkom, D.; Geresdi, A.; Plissard, S. R.; Bakkers, E. P. A. M.; Akhmerov, A. R.; Dicarlo, L.

    2015-03-01

    Hybrid superconducting-semiconducting circuits offer a versatile platform for studying quantum effects in mesoscopic solid-state systems. We report the realization of hybrid artificial atoms based on Indium-Arsenide nanowire Josephson elements in a circuit quantum electrodynamics architecture. Transmon-like single-junction devices have gate-tunable transition frequencies. Split-junction devices behave as transmons near zero applied flux and as flux qubits near half flux quantum, wherein states with oppositely flowing persistent current can be driven by microwaves. This flux-qubit like behaviour results from non-sinusoidal current-phase relations in the nanowire Josephson elements. These hybrid microwave circuits are made entirely of magnetic-field compatible materials, offering new opportunities for hybrid experiments combining microwave circuits with polarized spin ensembles and Majorana bound states. We acknowledge funding from Microsoft Research and the Dutch Organization for Fundamental Research on Matter (FOM).

  20. Semiconductor quantum dot-inorganic nanotube hybrids.

    PubMed

    Kreizman, Ronen; Schwartz, Osip; Deutsch, Zvicka; Itzhakov, Stella; Zak, Alla; Cohen, Sidney R; Tenne, Reshef; Oron, Dan

    2012-03-28

    A synthetic route for preparation of inorganic WS(2) nanotube (INT)-colloidal semiconductor quantum dot (QD) hybrid structures is developed, and transient carrier dynamics on these hybrids are studied via transient photoluminescence spectroscopy utilizing several different types of QDs. Measurements reveal efficient resonant energy transfer from the QDs to the INT upon photoexcitation, provided that the QD emission is at a higher energy than the INT direct gap. Charge transfer in the hybrid system, characterized using QDs with band gaps below the INT direct gap, is found to be absent. This is attributed to the presence of an organic barrier layer due to the relatively long-chain organic ligands of the QDs under study. This system, analogous to carbon nanotube-QD hybrids, holds potential for a variety of applications, including photovoltaics, luminescence tagging and optoelectronics. PMID:22354096

  1. A Hybrid Approach to Protect Palmprint Templates

    PubMed Central

    Sun, Dongmei; Xiong, Ke; Qiu, Zhengding

    2014-01-01

    Biometric template protection is indispensable to protect personal privacy in large-scale deployment of biometric systems. Accuracy, changeability, and security are three critical requirements for template protection algorithms. However, existing template protection algorithms cannot satisfy all these requirements well. In this paper, we propose a hybrid approach that combines random projection and fuzzy vault to improve the performances at these three points. Heterogeneous space is designed for combining random projection and fuzzy vault properly in the hybrid scheme. New chaff point generation method is also proposed to enhance the security of the heterogeneous vault. Theoretical analyses of proposed hybrid approach in terms of accuracy, changeability, and security are given in this paper. Palmprint database based experimental results well support the theoretical analyses and demonstrate the effectiveness of proposed hybrid approach. PMID:24982977

  2. Confirmation of Clematis hybrids using molecular markers

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The hybrid origin of two progeny from reciprocal crosses of Clematis tubulosa and C. brevicaudata was investigated using molecular markers generated by randomly amplified polymorphic DNA (RAPD), amplified fragment length polymorphism (AFLP), and single nucleotide polymorphisms (SNPs). Morphologi...

  3. Results of Labscale Hybrid Rocket Motor investigation

    NASA Technical Reports Server (NTRS)

    Greiner, B.; Frederick, R. A., Jr.

    1992-01-01

    This work was performed to establish a labscale hybrid rocket motor test and evaluation capability at NASA Marshall Space Flight Center. The scope included activation of a Labscale Hybrid Motor, determination of baseline burning rates for PMMA fuel, and replication of pressure oscillations for HTPB fuel. The 0.820-in.-diam port, 10-in.-long fuel grains were burned for two seconds with gaseous oxygen. PMMA fuels were tested at oxygen fluxes from 0.047 lbm/sec sq in. to 0.378 lbm/sec sq in., and the HTPB fuel was evaluated at 0.378 lbm/sec sq in. The results showed that the labscale hybrid motor replicated previously reported PMMA fuel regression rates. The results also replicated low-frequency (less than 100 Hz) pressure oscillations that have been observed for HTPB fuels. These results establish the Labscale Hybrid Motor facility at MSFC.

  4. The Patriot's hybrid-electric drivetrain

    SciTech Connect

    Jost, K.

    1994-12-01

    Hybrid powertrain concepts are not new. Sailing ships carried auxiliary steam power on trans-Atlantic trips in the 19th Century. The 1917 Woods dual power'' automobile had a small internal combustion engine and supplementary electric drive featuring regenerative braking. But hybrid automobiles have not been successful in the automotive marketplace. For such vehicles to be successful, Chrysler officials believe a hybrid powertrain must be designed for the specific duty cycle of the vehicle; the vehicle-performance compromise must be acceptable to the customer; component efficiency and durability will have to be improved; and major component cost reductions will be required. This article describes how Chrysler is using a road-racing vehicle in the development of hybrid powertrains.

  5. Pulse detonation assembly and hybrid engine

    NASA Technical Reports Server (NTRS)

    Rasheed, Adam (Inventor); Dean, Anthony John (Inventor); Vandervort, Christian Lee (Inventor)

    2010-01-01

    A pulse detonation (PD) assembly includes a number of PD chambers adapted to expel respective detonation product streams and a number of barriers disposed between respective pairs of PD chambers. The barriers define, at least in part, a number of sectors that contain at least one PD chamber. A hybrid engine includes a number of PD chambers and barriers. The hybrid engine further includes a turbine assembly having at least one turbine stage, being in flow communication with the PD chambers and being configured to be at least partially driven by the detonation product streams. A segmented hybrid engine includes a number of PD chambers and segments configured to receive and direct the detonation product streams from respective PD chambers. The segmented hybrid engine further includes a turbine assembly configured to be at least partially driven by the detonation product streams.

  6. Molecular mechanisms of polyploidy and hybrid vigor

    PubMed Central

    Chen, Z. Jeffrey

    2010-01-01

    Hybrids such as maize (Zea mays) or domestic dog (Canis lupus familiaris) grow bigger and stronger than their parents. This is also true for allopolyploids such as wheat (Triticum spp.) or frog (i.e. Xenopus and Silurana) that contain two or more sets of chromosomes from different species. The phenomenon, known as hybrid vigor or heterosis, was systematically characterized by Charles Darwin (1876). The rediscovery of heterosis in maize a century ago has revolutionized plant and animal breeding and production. Although genetic models for heterosis have been rigorously tested, the molecular bases remain elusive. Recent studies have determined the roles of nonadditive gene expression, small RNAs, and epigenetic regulation, including circadian-mediated metabolic pathways, in hybrid vigor and incompatibility, which could lead to better use and exploitation of the increased biomass and yield in hybrids and allopolyploids for food, feed, and biofuels. PMID:20080432

  7. Silicon nanocrystal-noble metal hybrid nanoparticles

    NASA Astrophysics Data System (ADS)

    Sugimoto, H.; Fujii, M.; Imakita, K.

    2016-05-01

    We report a novel and facile self-limiting synthesis route of silicon nanocrystal (Si NC)-based colloidally stable semiconductor-metal (gold, silver and platinum) hybrid nanoparticles (NPs). For the formation of hybrid NPs, we employ ligand-free colloidal Si NCs with heavily boron (B) and phosphorus (P) doped shells. By simply mixing B and P codoped colloidal Si NCs with metal salts, hybrid NPs consisting of metal cores and Si NC shells are spontaneously formed. We demonstrate the synthesis of highly uniform and size controllable hybrid NPs. It is shown that codoped Si NCs act as a reducing agent for metal salts and also as a protecting layer to stop metal NP growth. The process is thus self-limiting. The development of a variety of Si NC-based hybrid NPs is a promising first step for the design of biocompatible multifunctional NPs with broad material choices for biosensing, bioimaging and solar energy conversion.We report a novel and facile self-limiting synthesis route of silicon nanocrystal (Si NC)-based colloidally stable semiconductor-metal (gold, silver and platinum) hybrid nanoparticles (NPs). For the formation of hybrid NPs, we employ ligand-free colloidal Si NCs with heavily boron (B) and phosphorus (P) doped shells. By simply mixing B and P codoped colloidal Si NCs with metal salts, hybrid NPs consisting of metal cores and Si NC shells are spontaneously formed. We demonstrate the synthesis of highly uniform and size controllable hybrid NPs. It is shown that codoped Si NCs act as a reducing agent for metal salts and also as a protecting layer to stop metal NP growth. The process is thus self-limiting. The development of a variety of Si NC-based hybrid NPs is a promising first step for the design of biocompatible multifunctional NPs with broad material choices for biosensing, bioimaging and solar energy conversion. Electronic supplementary information (ESI) available: Additional TEM images and extinction spectra of Si-metal hybrid NPs are shown in Fig. S1

  8. Hybrid Therapy Regimen for Helicobacter Pylori Eradication

    PubMed Central

    Song, Zhi-Qiang; Liu, Jian; Zhou, Li-Ya

    2016-01-01

    Objective: Helicobacter pylori (H. pylori) eradication remains a challenge with increasing antibiotic resistance. Hybrid therapy has attracted widespread attention because of initial report with good efficacy and safety. However, many issues on hybrid therapy are still unclear such as the eradication efficacy, safety, compliance, influencing factors, correlation with antibiotic resistance, and comparison with other regimens. Therefore, a comprehensive review on the evidence of hybrid therapy for H. pylori infection was conducted. Data Sources: The data used in this review were mainly from PubMed articles published in English up to September 30, 2015, searching by the terms of “Helicobacter pylori” or “H. pylori”, and “hybrid”. Study Selection: Clinical research articles were selected mainly according to their level of relevance to this topic. Results: Totally, 1871 patients of 12 studies received hybrid therapy. The eradication rates were 77.6–97.4% in intention-to-treat and 82.6–99.1% in per-protocol analyses. Compliance was 93.3–100.0%, overall adverse effects rate was 14.5–67.5%, and discontinued medication rate due to adverse effects was 0–6.7%. H. pylori culture and sensitivity test were performed only in 13.3% patients. Pooled analysis showed that the eradication rates with dual clarithromycin and metronidazole susceptible, isolated metronidazole or clarithromycin resistance, and dual clarithromycin and metronidazole resistance were 98.5%, 97.6%, 92.9%, and 80.0%, respectively. Overall, the efficacy, compliance, and safety of hybrid therapy were similar with sequential or concomitant therapy. However, hybrid therapy might be superior to sequential therapy in Asians. Conclusions: Hybrid therapy showed wide differences in the efficacy but consistently good compliance and safety across different regions. Dual clarithromycin and metronidazole resistance were the key factor to efficacy. Hybrid therapy was similar to sequential or concomitant

  9. Hybrid compounds: from simple combinations to nanomachines.

    PubMed

    Müller-Schiffmann, Andreas; Sticht, Heinrich; Korth, Carsten

    2012-02-01

    The combination of two different and independently acting compounds into one covalently linked hybrid compound can convey synergy from the effects of both independently acting moieties to the new composite compound, leading to a pharmacological potency greater than the sum of each individual moiety's potencies. Here, we review a variety of such hybrid compounds, which can consist of various functional parts, molecular recognition or subcellular targeting moieties, or combinations thereof, acting either simultaneously or sequentially. Such moieties within a hybrid compound can consist of a variety of substance classes, including small organic molecules, polypeptides or nucleic acids identified either via rational molecular design or selection from libraries. Precedent for hybrid compounds comes from naturally occurring proteins and small molecules, such as botulinum toxin and bleomycin, which are secreted by micro-organisms. We review the high degree of suitability of hybrid compounds for the treatment of multifactorial diseases by simultaneously hitting several targets along an identified disease pathway. Examples are hybrid compounds against Alzheimer's disease, against the cancer-relevant phosphoinisitide-3-kinase (PI3K)/AKT/mammalian target of rapamycin (mTOR) and epidermal growth factor signaling cascade, or in antimalarial therapy via simultaneous hitting of different mechanisms of hemozoin formation. Molecular recognition by peptides or aptamers (recognition-specific RNA or peptide sequences) can be combined with the transport of small molecule β-sheet breakers or toxins, or targeting to ubiquitin-dependent proteolysis. The vision of molecular nanomachines is currently realized in sequentially acting modular nanotransporters, consisting of four modules including a target, a membrane and nuclear translocation sequence, as well as a drug attachment domain. Through the rational combination of existing drugs and the synergy of their effects, a rapid

  10. Extra Chance Generalized Hybrid Monte Carlo

    NASA Astrophysics Data System (ADS)

    Campos, Cédric M.; Sanz-Serna, J. M.

    2015-01-01

    We study a method, Extra Chance Generalized Hybrid Monte Carlo, to avoid rejections in the Hybrid Monte Carlo method and related algorithms. In the spirit of delayed rejection, whenever a rejection would occur, extra work is done to find a fresh proposal that, hopefully, may be accepted. We present experiments that clearly indicate that the additional work per sample carried out in the extra chance approach clearly pays in terms of the quality of the samples generated.

  11. Photovoltaik Hybrid-Solarzellen mit Nanopartikeln

    NASA Astrophysics Data System (ADS)

    Leute, Angelika

    2004-09-01

    Die organische Photovoltaik auf der Basis halbleitender Polymere bietet eine kostengünstige Alternative zu Solarzellen aus Silizium. Allerdings weisen die organischen Materialien relativ schlechte Ladungstransporteigenschaften auf. Hybrid-Solarzellen, in denen Polymere mit geeigneten anorganischen Halbleitern kombiniert sind, besitzen einerseits die praktischen Vorteile der Organik und andererseits die hohe Elektronenbeweglichkeit der anorganischen Materialien. Wissenschaftler der Technischen Universität Eindhoven haben kürzlich Hybrid-Solarzellen vorgestellt, die aus einem halbleitenden Polymer mit Zinkoxid-Nanopartikeln bestehen.

  12. Microstructure-FBG hybrid load cell

    NASA Astrophysics Data System (ADS)

    Fiorin, Rodrigo; da Costa, Larissa N.; Abe, Ilda; de Oliveira, Valmir; Lohmann, Andre; Kalinowski, Hypolito J.

    2014-05-01

    We report the fabrication of an hybrid fibre optic and T-shaped microstructrure inscribed in soda lime microscope slides by using femtosecond laser irradiation technique. that allow to construct true 3-D structures. Within the T-shaped structure a FBG was inserted and glued with photopolymer adhesive. The hybrid structure is sensitive to hydrostatic pressure. Calibration load tests were performed in the range 0 - 100 N.

  13. Amorphous Carbon-Boron Nitride Nanotube Hybrids

    NASA Technical Reports Server (NTRS)

    Kim, Jae Woo (Inventor); Siochi, Emilie J. (Inventor); Wise, Kristopher E. (Inventor); Lin, Yi (Inventor); Connell, John (Inventor)

    2016-01-01

    A method for joining or repairing boron nitride nanotubes (BNNTs). In joining BNNTs, the nanotube structure is modified with amorphous carbon deposited by controlled electron beam irradiation to form well bonded hybrid a-C/BNNT structures. In repairing BNNTs, the damaged site of the nanotube structure is modified with amorphous carbon deposited by controlled electron beam irradiation to form well bonded hybrid a-C/BNNT structures at the damage site.

  14. 7 CFR 201.11a - Hybrid.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Hybrid. 201.11a Section 201.11a Agriculture... REGULATIONS Labeling Agricultural Seeds § 201.11a Hybrid. If any one kind or kind and variety of seed present in excess of 5 percent is “hybrid” seed, it shall be designated “hybrid” on the label. The...

  15. Performance measurements of hybrid PIN diode arrays

    SciTech Connect

    Shapiro, S.L. ); Arens, J.F.; Jernigan, J.G. . Space Sciences Lab.); Kramer, G. ); Collins, T.; Worley, S. ); Wilburn, C.D. ); Skubic, P. )

    1990-10-01

    We report the successful development of hybrid PIN diode arrays and a series of room-temperature measurements in a high-energy pion beam at FNAL. A PMOS VLSI 256 {times} 256 readout array having 30 {mu}m square pixels was indium-bump bonded to a mating PIN diode detector array. Preliminary measurements on the resulting hybrid show excellent signal-to-noise at room temperature. 3 refs., 5 figs.

  16. HOPSPACK: Hybrid Optimization Parallel Search Package.

    SciTech Connect

    Gray, Genetha A.; Kolda, Tamara G.; Griffin, Joshua; Taddy, Matt; Martinez-Canales, Monica

    2008-12-01

    In this paper, we describe the technical details of HOPSPACK (Hybrid Optimization Parallel SearchPackage), a new software platform which facilitates combining multiple optimization routines into asingle, tightly-coupled, hybrid algorithm that supports parallel function evaluations. The frameworkis designed such that existing optimization source code can be easily incorporated with minimalcode modification. By maintaining the integrity of each individual solver, the strengths and codesophistication of the original optimization package are retained and exploited.4

  17. Some properties of convection in hybrid stars

    NASA Astrophysics Data System (ADS)

    Yudin, A. V.; Hempel, M.; Nadyozhin, D. K.; Razinkova, T. L.

    2016-02-01

    It is shown that the unusual thermodynamic properties of matter within the region of two-phase coexistence in hybrid stars result in a change of the standard condition for beginning of convection. In particular, the thermal flux transported by convection may be directed towards the stellar centre. We discuss favourable circumstances leading to such an effect of `inverse convection' and its possible influence on the thermal evolution of hybrid stars.

  18. Two hybrid versions of a forest tractor

    SciTech Connect

    Baldini, S.S.; Carlini, M.; Abenavoli, R.I.; Kormanski, H.; Rudzinska, K.

    1998-07-01

    In this paper the authors consider two different hybrid drive systems for a small caterpillar tractor used for logging in forests. The first one is a series hybrid electric propulsion system. It is composed of an internal combustion (IC) engine, an electric generator, a group of lead-acid batteries and electric drive motors. The second one is a series hybrid hydraulic propulsion system. It is composed of an IC engine, hydraulic pump, a group of hydraulic accumulators and hydraulic motors. Generally, vehicles employed in forestry and agricultural works are characterized by low utilization of the available installed power. It stems from oversizing IC engine in a conventional driveline in order to supply the maximum power. Since the mean required power over a duty cycle is often substantially lower, a series hybrid drive system has potential for improving fuel economy, reducing pollutant emission and noise level. Series hybrids generally feature small engines because they are sized to provide only the average vehicle power demand. Sizing of the engine and other drive system components is significantly different in a hybrid vehicle than in a conventional forest tractor in which the engine is the only source of power to drive the vehicle or to lift wood. In a hybrid crawler, the power required at any time is split between auxiliary power unit (IC engine/electric generator or IC engine/hydraulic pump) and load leveling device (batteries or hydraulic accumulators). The engine can be decoupled from the terrain load. This may allow the engine to be operated near its most efficient fuel consumption conditions or else turned off. The presented hybrid powertrains are compared with the conventional one and one to another. Each of them has its own advantages and disadvantages. To evaluate the performance of the proposed solutions a special forest cycle was used.

  19. Analysis of Hybrid Hydrogen Systems: Final Report

    SciTech Connect

    Dean, J.; Braun, R.; Munoz, D.; Penev, M.; Kinchin, C.

    2010-01-01

    Report on biomass pathways for hydrogen production and how they can be hybridized to support renewable electricity generation. Two hybrid systems were studied in detail for process feasibility and economic performance. The best-performing system was estimated to produce hydrogen at costs ($1.67/kg) within Department of Energy targets ($2.10/kg) for central biomass-derived hydrogen production while also providing value-added energy services to the electric grid.

  20. Hybrid rocket engine, theoretical model and experiment

    NASA Astrophysics Data System (ADS)

    Chelaru, Teodor-Viorel; Mingireanu, Florin

    2011-06-01

    The purpose of this paper is to build a theoretical model for the hybrid rocket engine/motor and to validate it using experimental results. The work approaches the main problems of the hybrid motor: the scalability, the stability/controllability of the operating parameters and the increasing of the solid fuel regression rate. At first, we focus on theoretical models for hybrid rocket motor and compare the results with already available experimental data from various research groups. A primary computation model is presented together with results from a numerical algorithm based on a computational model. We present theoretical predictions for several commercial hybrid rocket motors, having different scales and compare them with experimental measurements of those hybrid rocket motors. Next the paper focuses on tribrid rocket motor concept, which by supplementary liquid fuel injection can improve the thrust controllability. A complementary computation model is also presented to estimate regression rate increase of solid fuel doped with oxidizer. Finally, the stability of the hybrid rocket motor is investigated using Liapunov theory. Stability coefficients obtained are dependent on burning parameters while the stability and command matrixes are identified. The paper presents thoroughly the input data of the model, which ensures the reproducibility of the numerical results by independent researchers.

  1. Market mature 1998 hybrid electric vehicles

    SciTech Connect

    Wyczalek, F.A.

    1998-07-01

    Beginning in 1990, the major automotive passenger vehicle manufacturers once again re-evaluated the potential of the battery powered electric vehicle (EV). This intensive effort to reduce the battery EV to commercial practice focused attention on the key issue of limited vehicle range, resulting from the low energy density and high mass characteristics of batteries, in comparison to the high energy density of liquid hydrocarbon (HC) fuels. Consequently, by 1995, vehicle manufacturers turned their attention to hybrid electric vehicles (HEV). This redirection of EV effort was highlighted finally, in 1997, at the 57th Frankfurt Motor Show, the Audi Duo parallel type hybrid was released for the domestic market as a 1998 model vehicle. Also at the 1997 32nd Tokyo Motor Show, the Toyota Hybrid System (THS) Prius was released for the domestic market as a 1998 model vehicle. This paper presents a comparative analysis of the key features of these two 1998 model year production hybrid propulsion systems. Among the conclusions, two issues are evident: one, the major manufacturers have turned to the hybrid concept in their search for solutions to the key EV issues of limited range and heating/air conditioning; and, two, the focus is now on introducing hybrid EV for test marketing domestically.

  2. Various challenging aspects of hybrid propulsion

    NASA Astrophysics Data System (ADS)

    Orlandi, O.; Theil, D.; Saramago, J.; Amand, P. G.; Dauch, F.; Gautier, P.

    2011-10-01

    The hybrid technology appears as an innovative, high performance, and promising propulsion technique in a number of space missions. By combining functions and advantages taken from both solid and liquid propulsion, this technology is expected to provide mainly high performance with throttleability and stop-restart capabilities. The safety conditions of engine operation and design reliability almost similar to solid propulsion increase the interest to this technology. However, the standard fuels (mainly based on a carbon polymer) exhibit low regression rates that require complex grain shapes and low loading ratio. Thanks to a dedicated study supported by the European Space Agency (ESA), SNPE in collaboration with Avio and University of Naples (DIAS department) performed an exhaustive state-of-the-art and a market survey of accomplishments in hybrid propulsion. Based on the resulting tradeoff study on potential future launchers and spacecraft applications, the most promising applications are selected to conduct preliminary designs. These applications can also be seen as the vector of hybrid propulsion development. This study concentrates on hybrid propulsion systems with advanced hybrid fuels for Lander platform and Upper Stage. High throttleability and high propulsive performance associated with stop and restart capability are needed to meet mission requirements for Lander and Upper Stage, respectively. Preliminary design shows the advantages provided by hybrid propulsion: a significant payload mass increase for the upper stage case and a soft landing for the Lander case.

  3. Hybrid Data Assimilation without Ensemble Filtering

    NASA Technical Reports Server (NTRS)

    Todling, Ricardo; Akkraoui, Amal El

    2014-01-01

    The Global Modeling and Assimilation Office is preparing to upgrade its three-dimensional variational system to a hybrid approach in which the ensemble is generated using a square-root ensemble Kalman filter (EnKF) and the variational problem is solved using the Grid-point Statistical Interpolation system. As in most EnKF applications, we found it necessary to employ a combination of multiplicative and additive inflations, to compensate for sampling and modeling errors, respectively and, to maintain the small-member ensemble solution close to the variational solution; we also found it necessary to re-center the members of the ensemble about the variational analysis. During tuning of the filter we have found re-centering and additive inflation to play a considerably larger role than expected, particularly in a dual-resolution context when the variational analysis is ran at larger resolution than the ensemble. This led us to consider a hybrid strategy in which the members of the ensemble are generated by simply converting the variational analysis to the resolution of the ensemble and applying additive inflation, thus bypassing the EnKF. Comparisons of this, so-called, filter-free hybrid procedure with an EnKF-based hybrid procedure and a control non-hybrid, traditional, scheme show both hybrid strategies to provide equally significant improvement over the control; more interestingly, the filter-free procedure was found to give qualitatively similar results to the EnKF-based procedure.

  4. Hybrid internal combustion reciprocating engine

    SciTech Connect

    Gonzalez, C.

    1988-08-23

    This patent describes a hybrid type reciprocating internal combustion turbine fuel engine with combined spark ignition, torch-assisted to compression ignition modes comprising: a cylinder; a cylinder head mounted on the cylinder having a substantially planar inner surface; exhaust and inlet valves positioned in the head connected to corresponding exhaust and unthrottled inlet passages; a piston reciprocally mounted within the cylinder having a top surface thereon which surface in the top dead center position of the piston is in close proximity with the inner surface of the cylinder head; a substantially spherical precombustion chamber located in the head; a lineal passage tangentially joining the precombustion chamber with the inner surface of the cylinder head; a pilot fuel injector means and an igniter means both located in the precombustion chamber which inject and ignite a precharge; a main fuel injector means in the cylinder head; a bowl-shaped recess comprising the main combustion chamber located in the top surface of the piston in close proximity with the main injector means in the top dead center position with the lineal passage tangentially aligned with the main combustion chamber, whereby the burning gases exiting the precombustion chamber are directed into the main combustion chamber causing ignition therein.

  5. Hybrid internal combustion reciprocating engine

    SciTech Connect

    Gonzales, C.

    1986-06-17

    A hybrid type reciprocating internal combustion engine is described which consists of: a cylinder, a cylinder head mounted on the cylinder having a substantially planar inner surface; exhaust and inlet valves positioned in the head connected to corresponding exhaust and unthrottled inlet passages; a piston reciprocally mounted within the cylinder having a top surface thereon which surface in the top dead center position of the piston is in close proximity with the inner surface of the head; a precombustion chamber located in the head; a lineal passage tangentially joining the precombustion chamber with the inner surface of the cylinder head; a pilot fuel injector means and an igniter means both located in the precombustion chamber which inject and ignite a precharge; a main fuel injector means in the cylinder head; a bowl shaped recess comprising the main combustion chamber non-concentrically located in the top surface of the piston in close proximity with the main injector means in the top dead center position; a first ramp means located in the top surface of the piston tangentially joining the main combustion chamber recess and substantially aligned with the lineal passage, when the piston is approximately at the top dead center position, whereby the burning gases exiting the precombustion chamber are directed into the main combustion recess; and a second ramp means in the top surface of the piston laterally joining the first ramp means.

  6. Test of DEP hybrid photodiodes

    SciTech Connect

    Baumbaugh, A.; Binkley, M.; Elias, J.

    1997-08-01

    The goal of the measurement was to study some parameters of DEP HYBRID PHOTODIODES (HPD), and the check its performance for CMS calorimetry at LHC. The principal of the HPD operation is described. The schematic view of the HPD. The HPD is vacuum photo device composed of photocathode (PC) and a silicon PIN diode (Si) as multiplication system in a very close proximity geometry. The distance between PC and Si is of the order of several mm and has an electric field < 10 kV. The photoelectron emited by the photocathode multiply by a factor of several thousand in the silicon and the charge is collected on the HPD`s anode. Several types of HPD`s were tested. There was a single channel HPD, called {open_quotes}E-type{close_quotes} with p-side of the silicon facing the HPD`s photocathode and two multipixel HPD (DEP) namely a 25 pixel HPD and a 7 pixel HPD. Both were of {open_quotes}T-type{close_quotes} structure with n-side of silicon facing the photocathode.

  7. Nonlinear stability of hybrid control

    SciTech Connect

    Doulgeri, Z.; Fahantidis, N.; Paul, R.P.

    1998-07-01

    A theoretical and experimental investigation on the stability properties of the hybrid control scheme was performed using Lyapunov`s theory for both the original scheme, which uses the Jacobian inverse for mapping Cartesian errors to joint errors, and a scheme using the Jacobian pseudoinverse. Both schemes result in position and force controllers that are statically coupled in the task space. Stability analysis shows that the pseudoinverse scheme is asymptotically stable, whereas the inverse scheme may become unstable depending on the manipulator attitude and the environmental stiffness. In the manipulator workspace, where kinematic instabilities have been reported to exist even away from kinematic singularities, the Jacobian inverse affects negatively the Lyapunov function`s positive definiteness and the negative sign of its derivative; this effect may become dominant when the environmental stiffness is zero or very low. Experimental results for a 2- and 3-degrees-of-freedom planar manipulator using a PUMA 560 were performed both in free space where stiffness is zero and in contact with a stiff surface. Experimental results in fee space have confirmed the stability properties of the two schemes as predicted by the theoretical analysis and are in agreement with previously reported simulation and experimental results. Experimental results in contact with a stiff wall gave stable results for both schemes.

  8. Parker Hybrid Hydraulic Drivetrain Demonstration

    SciTech Connect

    Collett, Raymond; Howland, James; Venkiteswaran, Prasad

    2014-03-31

    This report examines the benefits of Parker Hannifin hydraulic hybrid brake energy recovery systems used in commercial applications for vocational purposes. A detailed background on the problem statement being addressed as well as the solution set specific for parcel delivery will be provided. Objectives of the demonstration performed in high start & stop applications included opportunities in fuel usage reduction, emissions reduction, vehicle productivity, and vehicle maintenance. Completed findings during the demonstration period and parallel investigations with NREL, CALSTART, along with a literature review will be provided herein on this research area. Lastly, results identified in the study by third parties validated the savings potential in fuel reduction of on average of 19% to 52% over the baseline in terms of mpg (Lammert, 2014, p11), Parker data for parcel delivery vehicles in the field parallels this at a range of 35% - 50%, emissions reduction of 17.4% lower CO2 per mile and 30.4% lower NOx per mile (Gallo, 2014, p15), with maintenance improvement in the areas of brake and starter replacement, while leaving room for further study in the area of productivity in terms of specific metrics that can be applied and studied.

  9. Heterodyne effect in Hybrid CARS

    NASA Astrophysics Data System (ADS)

    Wang, Xi; Zhang, Aihua; Zhi, Miaochan; Sokolov, Alexei; Welch, George; Scully, Marlan

    2009-10-01

    We study the interaction between the resonant Raman signal and non-Raman field, either the concomitant nonresonant four-wave-mixing (FWM) background or an applied external field, in our recently developed scheme of coherent Anti-Stokes Raman scattering, a hybrid CARS. Our technique combines instantaneous coherent excitation of several characteristic molecular vibrations with subsequent probing of these vibrations by an optimally shaped, time-delayed, narrowband laser pulse. This pulse configuration mitigates the non-resonant FWM background while maximizing the Raman-resonant signal, and allows rapid and highly specific detection even in the presence of multiple scattering. We apply this method to non-invasive monitoring of blood glucose levels. Under certain conditions we find that the measured signal is linearly proportional to the glucose concentration due to optical interference with the residual background light, which allows reliable detection of spectral signatures down to medically-relevant glucose levels. We also study the interference between the CARS field and an external field (the local oscillator) by controlling their relative phase and amplitude. This control allows direct observation of the real and imaginary components of the third-order nonlinear susceptibility (χ^(3)) of the sample. We demonstrate that the heterodyne method can be used to amplify the signal and thus increase detection sensitivity.

  10. Hybrid thermionic-photovoltaic converter

    NASA Astrophysics Data System (ADS)

    Datas, A.

    2016-04-01

    A conceptual device for the direct conversion of heat into electricity is presented. This concept hybridizes thermionic (TI) and thermophotovoltaic (TPV) energy conversion in a single thermionic-photovoltaic (TIPV) solid-state device. This device transforms into electricity both the electron and photon fluxes emitted by an incandescent surface. This letter presents an idealized analysis of this device in order to determine its theoretical potential. According to this analysis, the key advantage of this converter, with respect to either TPV or TI, is the higher power density in an extended temperature range. For low temperatures, TIPV performs like TPV due to the negligible electron flux. On the contrary, for high temperatures, TIPV performs like TI due to the great enhancement of the electron flux, which overshadows the photon flux contribution. At the intermediate temperatures, ˜1650 K in the case of this particular study, I show that the power density potential of TIPV converter is twice as great as that of TPV and TI. The greatest impact concerns applications in which the temperature varies in a relatively wide range, for which averaged power density enhancement above 500% is attainable.

  11. High speed hybrid active system

    NASA Astrophysics Data System (ADS)

    Gonzalez, Ignacio F.; Chang, Fu-Kuo; Qing, Peter X.; Kumar, Amrita; Zhang, David

    2005-05-01

    A novel piezoelectric/fiber-optic system is developed for long-term health monitoring of aerospace vehicles and structures. The hybrid diagnostic system uses the piezoelectric actuators to input a controlled excitation to the structure and the fiber optic sensors to capture the corresponding structural response. The aim of the system is to detect changes in structures such as those found in aerospace applications (damage, cracks, aging, etc.). This system involves the use of fiber Bragg gratings, which may be either bonded to the surface of the material or embedded within it in order to detect the linear strain component produced by the excitation waves generate by an arbitrary waveform generator. Interrogation of the Bragg gratings is carried out using a high speed fiber grating demodulation unit and a high speed data acquisition card to provide actuation input. With data collection and information processing; is able to determine the condition of the structure. The demands on a system suitable for detecting ultrasonic acoustic waves are different than for the more common strain and temperature systems. On the one hand, the frequency is much higher, with typical values for ultrasonic frequencies used in non-destructive testing ranging from 100 kHz up to several MHz. On the other hand, the related strain levels are much lower, normally in the μstrain range. Fiber-optic solutions for this problem do exist and are particularly attractive for ultrasonic sensing as the sensors offer broadband detection capability.

  12. Hybrid image segmentation using watersheds

    NASA Astrophysics Data System (ADS)

    Haris, Kostas; Efstratiadis, Serafim N.; Maglaveras, Nicos; Pappas, Costas

    1996-02-01

    A hybrid image segmentation algorithm is proposed which combines edge- and region-based techniques through the morphological algorithm of watersheds. The algorithm consists of the following steps: (1) edge-preserving statistical noise reduction, (2) gradient approximation, (3) detection of watersheds on gradient magnitude image, and (4) hierarchical region merging (HRM) in order to get semantically meaningful segmentations. The HRM process uses the region adjacency graph (RAG) representation of the image regions. At each step, the most similar pair of regions is determined (minimum cost RAG edge), the regions are merged and the RAG is updated. Traditionally, the above is implemented by storing all the RAG edges in a priority queue (heap). We propose a significantly faster algorithm which maintains an additional graph, the most similar neighbor graph, through which the priority queue size and processing time are drastically reduced. The final segmentation is an image partition which, through the RAG, provides information that can be used by knowledge-based high level processes, i.e. recognition. In addition, this region based representation provides one-pixel wide, closed, and accurately localized contours/surfaces. Due to the small number of free parameters, the algorithm can be quite effectively used in interactive image processing. Experimental results obtained with 2D MR images are presented.

  13. Aerodynamics of a hybrid airship

    NASA Astrophysics Data System (ADS)

    Andan, Amelda Dianne; Asrar, Waqar; Omar, Ashraf A.

    2012-06-01

    The objective of this paper is to present the results of a numerical study of the aerodynamic parameters of a wingless and a winged-hull airship. The total forces and moment coefficients of the airships have been computed over a range of angles. The results obtained show that addition of a wing to a conventional airship increases the lift has three times the lifting force at positive angle of attack as compared to a wingless airship whereas the drag increases in the range of 19% to 58%. The longitudinal and directional stabilities were found to be statically stable, however, both the conventional airship and the hybrid or winged airships were found to have poor rolling stability. Wingless airship has slightly higher longitudinal stability than a winged airship. The winged airship has better directional stability than the wingless airship. The wingless airship only possesses static rolling stability in the range of yaw angles of -5° to 5°. On the contrary, the winged airship initially tested does not possess rolling stability at all. Computational fluid dynamics (CFD) simulations show that modifications to the wing placement and its dihedral have strong positive effect on the rolling stability. Raising the wings to the center of gravity and introducing a dihedral angle of 5° stabilizes the rolling motion of the winged airship.

  14. Main memory unit. [hybrid computers

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The development of a main memory unit (MMU) for the space ultrareliable module computer (SUMC) model HTC is discussed. The design, fabrication, and test of basic memory modules (BMM) which were to be used in the design and construction of the MMU are described. The BMM was designed from state-of-the-art technologies which included large scale integration devices mounted and interconnected on a substrate to form a functional module to be utilized in the MMU development. A SUMC memory system design study is discussed which addressed itself to the BMM design and analysis to be conducted to determine the most efficient organization of the BMM in order to establish such modularity features as: word length expandability without redesign, high reliability, and fault tolerance. One MMU was designed, fabricated, tested, and delivered which will be electrical and mechanically compatible with the hybrid technology computer (HTC) model of the SUMC family of computers. The MMU will contain a storage capacity of 8196 36 bit words which includes a parity bit for each 8 bit byte of data.

  15. Hybrid systems process mixed wastes

    SciTech Connect

    Chertow, M.R.

    1989-10-01

    Some technologies, developed recently in Europe, combine several processes to separate and reuse materials from solid waste. These plants have in common, generally, that they are reasonably small, have a composting component for the organic portion, and often have a refuse-derived fuel component for combustible waste. Many European communities also have very effective drop-off center programs for recyclables such as bottles and cans. By maintaining the integrity of several different fractions of the waste, there is a less to landfill and less to burn. The importance of these hybrid systems is that they introduce in one plant an approach that encompasses the key concept of today's solid waste planning; recover as much as possible and landfill as little as possible. The plants also introduce various risks, particularly of finding secure markets. There are a number of companies offering various combinations of materials recovery, composting, and waste combustion. Four examples are included: multiple materials recovery and refuse-derived fuel production in Eden Prairie, Minnesota; multiple materials recovery, composting and refuse-derived fuel production in Perugia, Italy; composting, refuse-derived fuel, and gasification in Tolmezzo, Italy; and a front-end system on a mass burning waste-to-energy plant in Neuchatel, Switzerland.

  16. Lower hybrid wavepacket stochasticity revisited

    SciTech Connect

    Fuchs, V.; Krlín, L.; Pánek, R.; Preinhaelter, J.; Seidl, J.; Urban, J.

    2014-02-12

    Analysis is presented in support of the explanation in Ref. [1] for the observation of relativistic electrons during Lower Hybrid (LH) operation in EC pre-heated plasma at the WEGA stellarator [1,2]. LH power from the WEGA TE11 circular waveguide, 9 cm diameter, un-phased, 2.45 GHz antenna, is radiated into a B≅0.5 T, Ðœ„n{sub e}≅5×10{sup 17} 1/m{sup 3} plasma at T{sub e}≅10 eV bulk temperature with an EC generated 50 keV component [1]. The fast electrons cycle around flux or drift surfaces with few collisions, sufficient for randomizing phases but insufficient for slowing fast electrons down, and thus repeatedly interact with the rf field close to the antenna mouth, gaining energy in the process. Our antenna calculations reveal a standing electric field pattern at the antenna mouth, with which we formulate the electron dynamics via a relativistic Hamiltonian. A simple approximation of the equations of motion leads to a relativistic generalization of the area-preserving Fermi-Ulam (F-U) map [3], allowing phase-space global stochasticity analysis. At typical WEGA plasma and antenna conditions, the F-U map predicts an LH driven current of about 230 A, at about 225 W of dissipated power, in good agreement with the measurements and analysis reported in [1].

  17. Hybrid graphene plasmonic waveguide modulators.

    PubMed

    Ansell, D; Radko, I P; Han, Z; Rodriguez, F J; Bozhevolnyi, S I; Grigorenko, A N

    2015-01-01

    The unique optical and electronic properties of graphene make possible the fabrication of novel optoelectronic devices. One of the most exciting graphene characteristics is the tunability by gating which allows one to realize active optical devices. While several types of graphene-based photonic modulators have already been demonstrated, the potential of combining the versatility of graphene with subwavelength field confinement of plasmonic waveguides remains largely unexplored. Here we report fabrication and study of hybrid graphene-plasmonic waveguide modulators. We consider several types of modulators and identify the most promising one for telecom applications. The modulator working at the telecom range is demonstrated, showing a modulation depth of >0.03 dB μm(-1) at low gating voltages for an active device area of just 10 μm(2), characteristics which are already comparable to those of silicon-based waveguide modulators while retaining the benefit of further device miniaturization. Our proof-of-concept results pave the way towards on-chip realization of efficient graphene-based active plasmonic waveguide devices for optical communications. PMID:26554944

  18. Hybrid graphene plasmonic waveguide modulators

    NASA Astrophysics Data System (ADS)

    Ansell, D.; Radko, I. P.; Han, Z.; Rodriguez, F. J.; Bozhevolnyi, S. I.; Grigorenko, A. N.

    2015-11-01

    The unique optical and electronic properties of graphene make possible the fabrication of novel optoelectronic devices. One of the most exciting graphene characteristics is the tunability by gating which allows one to realize active optical devices. While several types of graphene-based photonic modulators have already been demonstrated, the potential of combining the versatility of graphene with subwavelength field confinement of plasmonic waveguides remains largely unexplored. Here we report fabrication and study of hybrid graphene-plasmonic waveguide modulators. We consider several types of modulators and identify the most promising one for telecom applications. The modulator working at the telecom range is demonstrated, showing a modulation depth of >0.03 dB μm-1 at low gating voltages for an active device area of just 10 μm2, characteristics which are already comparable to those of silicon-based waveguide modulators while retaining the benefit of further device miniaturization. Our proof-of-concept results pave the way towards on-chip realization of efficient graphene-based active plasmonic waveguide devices for optical communications.

  19. Hybrid k -Nearest Neighbor Classifier.

    PubMed

    Yu, Zhiwen; Chen, Hantao; Liuxs, Jiming; You, Jane; Leung, Hareton; Han, Guoqiang

    2016-06-01

    Conventional k -nearest neighbor (KNN) classification approaches have several limitations when dealing with some problems caused by the special datasets, such as the sparse problem, the imbalance problem, and the noise problem. In this paper, we first perform a brief survey on the recent progress of the KNN classification approaches. Then, the hybrid KNN (HBKNN) classification approach, which takes into account the local and global information of the query sample, is designed to address the problems raised from the special datasets. In the following, the random subspace ensemble framework based on HBKNN (RS-HBKNN) classifier is proposed to perform classification on the datasets with noisy attributes in the high-dimensional space. Finally, the nonparametric tests are proposed to be adopted to compare the proposed method with other classification approaches over multiple datasets. The experiments on the real-world datasets from the Knowledge Extraction based on Evolutionary Learning dataset repository demonstrate that RS-HBKNN works well on real datasets, and outperforms most of the state-of-the-art classification approaches. PMID:26126291

  20. Coherent hybrid electromagnetic field imaging

    DOEpatents

    Cooke, Bradly J.; Guenther, David C.

    2008-08-26

    An apparatus and corresponding method for coherent hybrid electromagnetic field imaging of a target, where an energy source is used to generate a propagating electromagnetic beam, an electromagnetic beam splitting means to split the beam into two or more coherently matched beams of about equal amplitude, and where the spatial and temporal self-coherence between each two or more coherently matched beams is preserved. Two or more differential modulation means are employed to modulate each two or more coherently matched beams with a time-varying polarization, frequency, phase, and amplitude signal. An electromagnetic beam combining means is used to coherently combine said two or more coherently matched beams into a coherent electromagnetic beam. One or more electromagnetic beam controlling means are used for collimating, guiding, or focusing the coherent electromagnetic beam. One or more apertures are used for transmitting and receiving the coherent electromagnetic beam to and from the target. A receiver is used that is capable of square-law detection of the coherent electromagnetic beam. A waveform generator is used that is capable of generation and control of time-varying polarization, frequency, phase, or amplitude modulation waveforms and sequences. A means of synchronizing time varying waveform is used between the energy source and the receiver. Finally, a means of displaying the images created by the interaction of the coherent electromagnetic beam with target is employed.

  1. Design, Synthesis, and Analysis of Minor Groove Binder Pyrrolepolyamide-2′-Deoxyguanosine Hybrids

    PubMed Central

    Kawashima, Etsuko; Ohba, Yusuke; Terui, Yusuke; Kamaike, Kazuo

    2010-01-01

    Pyrrolepolyamide-2′-deoxyguanosine hybrids (Hybrid 2 and Hybrid 3) incorporating the 3-aminopropionyl or 3-aminopropyl linker were designed and synthesized on the basis of previously reported results of a pyrrolepolyamide-adenosine hybrid (Hybrid 1). Evaluation of the DNA binding sequence selectivity of pyrrolepolyamide-2′-deoxyguanosine hybrids was performed by CD spectral and Tm analyses. It was shown that Hybrid 3 possessed greater binding specificity than distamycin A, Hybrid 1 and Hybrid 2. PMID:20700414

  2. Forage and bioenergy feedstock production from hybrid forage sorghum and sorghum x sudangrass hybrids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    As the bioenergy industry expands, producers choosing to shift current forage crop production to dedicated biomass crops will find it advantageous to grow low risk multi-purpose crops that maximize management options. Hybrid forage sorghums (HFS) and sorghum by sudangrass hybrids (SSG) are capable...

  3. Sexual hybridization of Lycopersicon esculentum and Solanum rickii by means of a sesquidiploid bridging hybrid.

    PubMed Central

    DeVerna, J W; Rick, C M; Chetelat, R T; Lanini, B J; Alpert, K B

    1990-01-01

    A sesquidiploid hybrid having two genomes of Lycopersicon esculentum and one of Solanum lycopersicoides served as a pistillate bridging parent in crosses with Solanum rickii to produce L. esculentum x S. rickii hybrid progeny. Of the four progeny obtained, one (GH2754) was diploid and three were aneuploid with extra S. lycopersicoides chromosomes. The hybrids had morphological features of both parents, but attributes of the wild parent dominated. The hybrid nature of the four progeny was confirmed by isozyme, restriction fragment length polymorphism, and cytological analyses. A mean of 9.15 bivalents was observed in pollen mother cells of GH2754. A high level of pollen abortion was seen in all hybrids. Crosses of the hybrids with staminate S. rickii yielded one backcross individual, revealing a very low, but certain level of female fertility. Colchicine treatment of GH2754 generated one promising amphidiploid hybrid, which exhibited strong preferential chromosome pairing (94% of the examined cells had 24 bivalents) and appreciable pollen fertility (43% stainable). Chromosome pairing, isozyme, and restriction fragment length polymorphism data support a very close relationship between the two Solanum spp. and a much greater distance between them and L. esculentum, but the data do not discriminate between them in respect to their distances from the latter. The cytological and molecular observations, previous reports of successful transfer of traits from S. lycopersicoides to L. esculentum, and our hybridization of L. esculentum x S. rickii suggest good prospects for gene transfer from S. rickii to L. esculentum. Images PMID:11607124

  4. Painting of parental chromatin in Beta hybrids by multi-colour fluorescent in situ hybridization.

    PubMed

    Desel, Christine; Jansen, Rita; Dedong, Gue; Schmidt, Thomas

    2002-02-01

    Sugar beet (Beta vulgaris L.) is a relatively young crop and has a narrow gene pool. In order to introduce genetic variability into the crop, interspecific hybrids, selected from crosses with wild beets of the sections Corollinae and Procumbentes, have been generated. The introgressed B. procumbens chromatin carries resistance genes to beet cyst nematode Heterodera schachtii Schm. These lines are important for breeding of nematode-resistant sugar beet, while Corollinae species are potential donors of tolerance to biotic and abiotic stresses such as drought or saline soils. We have used in situ hybridization of genomic DNA to discriminate the parental chromosomes in these interspecific hybrids. Suppression of cross-hybridization by blocking DNA was not necessary indicating that the investigated Beta genomes contain sufficient species-specific DNA enabling the unequivocal determination of the genomic composition of the hybrids. Interspecific hybrid lines with an additional chromosome (2n = 18 + 1), chromosome fragment (2n = 18 + fragment) or translocation of B. procumbens (2n = 18) were analysed by genomic in situ hybridization (GISH) at mitosis and meiosis. Species-specific satellites and ribosomal genes used in combination with genomic DNA or in rehybridization experiments served as landmark probes for chromosome identification in hybrid genomes. The detection of a B. procumbens translocation of approx. I Mbp demonstrated the sensitivity and resolution of GISH and showed that this approach is a powerful method in genome analysis projects of the genus Beta. PMID:12099348

  5. Wind/Hybrid Electricity Applications

    SciTech Connect

    McDaniel, Lori

    2001-03-31

    Wind energy is widely recognized as the most efficient and cost effective form of new renewable energy available in the Midwest. New utility-scale wind farms (arrays of large turbines in high wind areas producing sufficient energy to serve thousands of homes) rival the cost of building new conventional forms of combustion energy plants, gas, diesel and coal power plants. Wind energy is not subject to the inflationary cost of fossil fuels. Wind energy can also be very attractive to residential and commercial electric customers in high wind areas who would like to be more self-sufficient for their energy needs. And wind energy is friendly to the environment at a time when there is increasing concern about pollution and climate change. However, wind energy is an intermittent source of power. Most wind turbines start producing small amounts of electricity at about 8-10 mph (4 meters per second) of wind speed. The turbine does not reach its rated output until the wind reaches about 26-28 mph (12 m/s). So what do you do for power when the output of the wind turbine is not sufficient to meet the demand for energy? This paper will discuss wind hybrid technology options that mix wind with other power sources and storage devices to help solve this problem. This will be done on a variety of scales on the impact of wind energy on the utility system as a whole, and on the commercial and small-scale residential applications. The average cost and cost-benefit of each application along with references to manufacturers will be given. Emerging technologies that promise to shape the future of renewable energy will be explored as well.

  6. Hybrid Silicon AWG Lasers and Buffers

    NASA Astrophysics Data System (ADS)

    Kurczveil, Geza

    Silicon photonics promises the low cost integration of optical components with CMOS electronics thus enabling optical interconnects in future generation processors. The hybrid silicon platform (HSP) is one approach to make optically active components on silicon. While many optical components on the HSP have been demonstrated, few photonic integrated circuits (PICs), consisting of multiple elements, have been demonstrated. In this dissertation, two Hybrid Silicon PICs and their building blocks will be presented. The first PIC to be presented is a multiwavelength laser based on an AWG. It consists of Fabry-Perot cavities integrated with hybrid silicon amplifiers and an intracavity filter in the form of an AWG with a channel spacing of 360 GHz. Four-channel lasing operation is shown. Single-sided fiber-coupled output powers as high as 35 µW are measured. The SMSR is as high as 35 dB. Various device characteristics are compromised as the AWG was attacked during the III-V process, thus showing the need to properly protect passive components during III-V processing. The second PIC to be presented is a fully integrated optical buffer. The device consists of a hybrid silicon switch, a 1.1 m long silicon waveguide, and cascaded hybrid silicon amplifiers. The passive delay line is protected by dielectric layers to limit passive losses to 0.5 dB/cm. Noise filters in the form of saturable absorbers are integrated in the buffer to allow for a larger number of recirculations in the delay line compared to a delay without filters. Tapers are used to transition the mode from the passive region to the hybrid region with losses as low as 0.22 dB per transition and reflectivities below -35 dB. Error free operation of the hybrid silicon switch is demonstrated in all four paths. The integrated buffer failed due to low yield, showing the current limitations of the HSP.

  7. Evolution and Molecular Control of Hybrid Incompatibility in Plants.

    PubMed

    Chen, Chen; E, Zhiguo; Lin, Hong-Xuan

    2016-01-01

    Postzygotic reproductive isolation (RI) plays an important role in speciation. According to the stage at which it functions and the symptoms it displays, postzygotic RI can be called hybrid inviability, hybrid weakness or necrosis, hybrid sterility, or hybrid breakdown. In this review, we summarized new findings about hybrid incompatibilities in plants, most of which are from studies on Arabidopsis and rice. Recent progress suggests that hybrid incompatibility is a by-product of co-evolution either with "parasitic" selfish elements in the genome or with invasive microbes in the natural environment. We discuss the environmental influences on the expression of hybrid incompatibility and the possible effects of environment-dependent hybrid incompatibility on sympatric speciation. We also discuss the role of domestication on the evolution of hybrid incompatibilities. PMID:27563306

  8. Evolution and Molecular Control of Hybrid Incompatibility in Plants

    PubMed Central

    Chen, Chen; E, Zhiguo; Lin, Hong-Xuan

    2016-01-01

    Postzygotic reproductive isolation (RI) plays an important role in speciation. According to the stage at which it functions and the symptoms it displays, postzygotic RI can be called hybrid inviability, hybrid weakness or necrosis, hybrid sterility, or hybrid breakdown. In this review, we summarized new findings about hybrid incompatibilities in plants, most of which are from studies on Arabidopsis and rice. Recent progress suggests that hybrid incompatibility is a by-product of co-evolution either with “parasitic” selfish elements in the genome or with invasive microbes in the natural environment. We discuss the environmental influences on the expression of hybrid incompatibility and the possible effects of environment-dependent hybrid incompatibility on sympatric speciation. We also discuss the role of domestication on the evolution of hybrid incompatibilities. PMID:27563306

  9. Historical and modern genetics of plant graft hybridization.

    PubMed

    Liu, Yongsheng

    2006-01-01

    Graft hybridization is a type of asexual hybridization in which heritable changes may be induced by grafting. Darwin was the first to put forward the conception of graft hybridization. The existence of graft hybrids has been extensively documented, although there has been a refusal to accept its reality, other than perceiving the phenomenon as involving "simple" chimeras. Graft hybrids can be divided into two categories--chimera graft hybrid (so-called graft chimera) and nonchimera graft hybrid (so-called vegetative hybrid). These differ with respect to grafting methods, characteristics, and mechanisms proposed to underlie the two categories. Graft hybridization is not only a simple and powerful means of plant breeding but also provides striking evidence in favor of Darwin's notions about Pangenesis--a developmental theory of heredity, on the one hand, and a phenomenon that plays a crucial role in revealing the mystery of non-Mendelian inheritance in grafted fruit trees. PMID:16735156

  10. Evaluation of tensile strength of hybrid fiber (jute/gongura) reinforced hybrid polymer matrix composites

    NASA Astrophysics Data System (ADS)

    Venkatachalam, G.; Gautham Shankar, A.; Vijay, Kumar V.; Chandan, Byral R.; Prabaharan, G. P.; Raghav, Dasarath

    2015-07-01

    The polymer matrix composites attract many industrial applications due to its light weight, less cost and easy for manufacturing. In this paper, an attempt is made to prepare and study of the tensile strength of hybrid (two natural) fibers reinforced hybrid (Natural + Synthetic) polymer matrix composites. The samples were prepared with hybrid reinforcement consists of two different fibers such as jute and Gongura and hybrid polymer consists of polyester and cashew nut shell resins. The hybrid composites tensile strength is evaluated to study the influence of various fiber parameters on mechanical strength. The parameters considered here are the duration of fiber treatment, the concentration of alkali in fiber treatment and nature of fiber content in the composites.

  11. SCAN-based hybrid and double-hybrid density functionals from models without fitted parameters.

    PubMed

    Hui, Kerwin; Chai, Jeng-Da

    2016-01-28

    By incorporating the nonempirical strongly constrained and appropriately normed (SCAN) semilocal density functional [J. Sun, A. Ruzsinszky, and J. P. Perdew, Phys. Rev. Lett. 115, 036402 (2015)] in the underlying expression of four existing hybrid and double-hybrid models, we propose one hybrid (SCAN0) and three double-hybrid (SCAN0-DH, SCAN-QIDH, and SCAN0-2) density functionals, which are free from any fitted parameters. The SCAN-based double-hybrid functionals consistently outperform their parent SCAN semilocal functional for self-interaction problems and noncovalent interactions. In particular, SCAN0-2, which includes about 79% of Hartree-Fock exchange and 50% of second-order Møller-Plesset correlation, is shown to be reliably accurate for a very diverse range of applications, such as thermochemistry, kinetics, noncovalent interactions, and self-interaction problems. PMID:26827209

  12. Manzanita Hybrid Power system Project Final Report

    SciTech Connect

    Trisha Frank

    2005-03-31

    The Manzanita Indian Reservation is located in southeastern San Diego County, California. The Tribe has long recognized that the Reservation has an abundant wind resource that could be commercially utilized to its benefit, and in 1995 the Tribe established the Manzanita Renewable Energy Office. Through the U.S. Department of Energy's Tribal Energy Program the Band received funds to install a hybrid renewable power system to provide electricity to one of the tribal community buildings, the Manzanita Activities Center (MAC building). The project began September 30, 1999 and was completed March 31, 2005. The system was designed and the equipment supplied by Northern Power Systems, Inc, an engineering company with expertise in renewable hybrid system design and development. Personnel of the National Renewable Energy Laboratory provided technical assistance in system design, and continued to provide technical assistance in system monitoring. The grid-connected renewable hybrid wind/photovoltaic system provides a demonstration of a solar/wind energy hybrid power-generating project on Manzanita Tribal land. During the system design phase, the National Renewable Energy Lab estimated that the wind turbine is expected to produce 10,000-kilowatt hours per year and the solar array 2,000-kilowatt hours per year. The hybrid system was designed to provide approximately 80 percent of the electricity used annually in the MAC building. The project proposed to demonstrate that this kind of a system design would provide highly reliable renewable power for community uses.

  13. Evolution of a Laser Hybrid Welding Map

    NASA Astrophysics Data System (ADS)

    Kaplan, Alexander F. H.; Frostevarg, Jan; Ilar, Torbjörn; Bang, Hee-Seon; Bang, Han-Sur

    Laser arc hybrid welding combines the advantages but also the complex physical mechanisms of gas metal arc welding and laser keyhole welding. From manifold mainly experimental but also theoretical research results a map with versatile functions was initiated for the first time. The purpose is to survey the overall context and to facilitate navigation to the various phenomena that are shown through case studies accompanied by theoretical explanations and guidelines for optimization. Though not complete, the map enables systematic and graphical navigation to relevant publications. Based on a fundamental structure of the map, which was decided early, it is inherently extendable in the future by adding existing and new knowledge, also from other research groups, enabling evolution. The fundament of the map structure comprises gouge thickness, joint type and metal grade, in coherence with product and weld designers' starting points. The next hierarchy level of the map offers options in the joint type as well as in hybrid welding techniques. The latter contains techniques like double-sided welding, pulse shaping management of the arc or laser, CMT arcs, tandem arcs, or remelting of undercuts. In addition to laser-arc hybrid welding, other hybrid laser techniques like multilayer hot-wire laser welding of narrow gaps or hybrid laser friction stir welding can be taken into account. At the other end of the hierarchy, the map offers via a database-like archive electronic navigation to research results like weld macrographs, high speed imaging or numerical simulation results of the welding process.

  14. Hybrid discourse practice and science learning

    NASA Astrophysics Data System (ADS)

    Kamberelis, George; Wehunt, Mary D.

    2012-09-01

    In this article, we report on a study of how creative linguistic practices (which we call hybrid discourse practices) were enacted by students in a fifth-grade science unit on barn owls and how these practices helped to produce a synergistic micro-community of scientific practice in the classroom that constituted a fertile space for students (and the teacher) to construct emergent but increasingly legitimate and dynamic disciplinary knowledges and identities. Our findings are important for the ways in which they demonstrate (a) how students use hybrid discourse practices to self-scaffold their work within complex curricular tasks and when they are not completely sure about how to enact these tasks (b) how hybrid discourse practices can promote inquiry orientations to science, (c) how hybrid discourse practices index new and powerful forms of science pedagogy, and (d) how hybrid discourse practices are relevant to more global issues such as the crucial roles of language fluency and creativity, which are known prerequisites for advanced science learning and which aid students in developing skills that are necessary for entry into science and technology careers.

  15. Bio-inspired Hybrid Carbon Nanotube Muscles.

    PubMed

    Kim, Tae Hyeob; Kwon, Cheong Hoon; Lee, Changsun; An, Jieun; Phuong, Tam Thi Thanh; Park, Sun Hwa; Lima, Márcio D; Baughman, Ray H; Kang, Tong Mook; Kim, Seon Jeong

    2016-01-01

    There has been continuous progress in the development for biomedical engineering systems of hybrid muscle generated by combining skeletal muscle and artificial structure. The main factor affecting the actuation performance of hybrid muscle relies on the compatibility between living cells and their muscle scaffolds during cell culture. Here, we developed a hybrid muscle powered by C2C12 skeletal muscle cells based on the functionalized multi-walled carbon nanotubes (MWCNT) sheets coated with poly(3,4-ethylenedioxythiophene) (PEDOT) to achieve biomimetic actuation. This hydrophilic hybrid muscle is physically durable in solution and responds to electric field stimulation with flexible movement. Furthermore, the biomimetic actuation when controlled by electric field stimulation results in movement similar to that of the hornworm by patterned cell culture method. The contraction and relaxation behavior of the PEDOT/MWCNT-based hybrid muscle is similar to that of the single myotube movement, but has faster relaxation kinetics because of the shape-maintenance properties of the freestanding PEDOT/MWCNT sheets in solution. Our development provides the potential possibility for substantial innovation in the next generation of cell-based biohybrid microsystems. PMID:27220918

  16. Bio-inspired Hybrid Carbon Nanotube Muscles

    NASA Astrophysics Data System (ADS)

    Kim, Tae Hyeob; Kwon, Cheong Hoon; Lee, Changsun; An, Jieun; Phuong, Tam Thi Thanh; Park, Sun Hwa; Lima, Márcio D.; Baughman, Ray H.; Kang, Tong Mook; Kim, Seon Jeong

    2016-05-01

    There has been continuous progress in the development for biomedical engineering systems of hybrid muscle generated by combining skeletal muscle and artificial structure. The main factor affecting the actuation performance of hybrid muscle relies on the compatibility between living cells and their muscle scaffolds during cell culture. Here, we developed a hybrid muscle powered by C2C12 skeletal muscle cells based on the functionalized multi-walled carbon nanotubes (MWCNT) sheets coated with poly(3,4-ethylenedioxythiophene) (PEDOT) to achieve biomimetic actuation. This hydrophilic hybrid muscle is physically durable in solution and responds to electric field stimulation with flexible movement. Furthermore, the biomimetic actuation when controlled by electric field stimulation results in movement similar to that of the hornworm by patterned cell culture method. The contraction and relaxation behavior of the PEDOT/MWCNT-based hybrid muscle is similar to that of the single myotube movement, but has faster relaxation kinetics because of the shape-maintenance properties of the freestanding PEDOT/MWCNT sheets in solution. Our development provides the potential possibility for substantial innovation in the next generation of cell-based biohybrid microsystems.

  17. Bio-inspired Hybrid Carbon Nanotube Muscles

    PubMed Central

    Kim, Tae Hyeob; Kwon, Cheong Hoon; Lee, Changsun; An, Jieun; Phuong, Tam Thi Thanh; Park, Sun Hwa; Lima, Márcio D.; Baughman, Ray H.; Kang, Tong Mook; Kim, Seon Jeong

    2016-01-01

    There has been continuous progress in the development for biomedical engineering systems of hybrid muscle generated by combining skeletal muscle and artificial structure. The main factor affecting the actuation performance of hybrid muscle relies on the compatibility between living cells and their muscle scaffolds during cell culture. Here, we developed a hybrid muscle powered by C2C12 skeletal muscle cells based on the functionalized multi-walled carbon nanotubes (MWCNT) sheets coated with poly(3,4-ethylenedioxythiophene) (PEDOT) to achieve biomimetic actuation. This hydrophilic hybrid muscle is physically durable in solution and responds to electric field stimulation with flexible movement. Furthermore, the biomimetic actuation when controlled by electric field stimulation results in movement similar to that of the hornworm by patterned cell culture method. The contraction and relaxation behavior of the PEDOT/MWCNT-based hybrid muscle is similar to that of the single myotube movement, but has faster relaxation kinetics because of the shape-maintenance properties of the freestanding PEDOT/MWCNT sheets in solution. Our development provides the potential possibility for substantial innovation in the next generation of cell-based biohybrid microsystems. PMID:27220918

  18. Hybridization promotes speciation in Coenonympha butterflies.

    PubMed

    Capblancq, Thibaut; Després, Laurence; Rioux, Delphine; Mavárez, Jesús

    2015-12-01

    Hybridization has become a central element in theories of animal evolution during the last decade. New methods in population genomics and statistical model testing now allow the disentangling of the complexity that hybridization brings into key evolutionary processes such as local adaptation, colonization of new environments, species diversification and extinction. We evaluated the consequences of hybridization in a complex of three alpine butterflies in the genus Coenonympha, by combining morphological, genetic and ecological analyses. A series of approximate Bayesian computation procedures based on a large SNP data set strongly suggest that the Darwin's Heath (Coenonympha darwiniana) originated through hybridization between the Pearly Heath (Coenonympha arcania) and the Alpine Heath (Coenonympha gardetta) with different parental contributions. As a result of hybridization, the Darwin's Heath presents an intermediate morphology between the parental species, while its climatic niche seems more similar to the Alpine Heath. Our results also reveal a substantial genetic and morphologic differentiation between the two geographically disjoint Darwin's Heath lineages leading us to propose the splitting of this taxon into two different species. PMID:26581657

  19. On the hybrid localization/envelopment problem

    SciTech Connect

    Chu, Y.X.; Gou, J.B.; Li, Z.X.

    1999-05-01

    The problem of aligning the CAD model of a workpiece such that all points measured on the finished surfaces of the workpiece match closely to corresponding surfaces on the model while all unmachined surfaces lie outside the model is referred to as the hybrid localization/envelopment problem. The hybrid problem has important applications in setting up for machining of partially finished workpieces. This paper gives a formulation of the hybrid localization/envelopment problem, and presents a simple algorithm for computing its solutions. First, the authors show that when the finished surfaces of a workpiece are inadequate to fully constrain the rigid motions of the workpiece, then the set of free motions remaining must form a subgroup G{sub 0} of the Euclidean group SE(3). This allows the authors to decompose the hybrid problem into a (symmetric) localization problem on G{sub 0}. While the symmetric localization problem is solved using the fast symmetric localization (FSL) algorithm developed in one of the earlier papers, the envelopment problem is solved by computing the solutions of a sequence of linear programming (LP) problems. The authors derive explicitly the LP problems, and apply standard linear programming techniques to solve the LP problems. They present simulation results to demonstrate the effectiveness of the method for the hybrid problem.

  20. Development and characterization of hybrid thermoplastic composites

    NASA Astrophysics Data System (ADS)

    Karkhanis, Priyanka Chandrashekhar

    This work is aimed at studying the possibility of using interply hybrid woven thermoplastic semi-pregs in secondary structures in aircrafts at TenCate Advanced Composites, Netherlands and Purdue University. Three different interply hybrids were designed from combination of Cetex(c) carbon-PPS semi-preg, Owen corning's woven glass with PPS sheets and discontinuous chopped Cetex(c) carbon-PPS semi-preg to get desired flexural, out of plane and bearing properties. The design calculations are done based on classical laminate theory and the selection of materials to be used with carbon-PPS was done based on cost and availability. The Hybrid laminate performances are analyzed and compared to the conventional Cetex (c) Carbon-PPS semi-preg laminates. Observations are reported on three point bend test (European standard 2562), four point bend test(ASTM D6415-99) and bearing test (Airbus standards AITM 1-0009) for the laminates and it was found that hybrid laminates show a reduction of 5-10% in bending stiffness, 20-40% reduction in out-of-plane strength and 2-5%reduction in bearing with a cost reduction of 20-30%. The research identifies and documents the different factors responsible for failures and reduction in strength in the Hybrids.

  1. Rate analysis for a hybrid quantum repeater

    SciTech Connect

    Bernardes, Nadja K.; Loock, Peter van

    2011-01-15

    We present a detailed rate analysis for a hybrid quantum repeater assuming perfect memories and using optimal probabilistic entanglement generation and deterministic swapping routines. The hybrid quantum repeater protocol is based on atomic qubit-entanglement distribution through optical coherent-state communication. An exact, analytical formula for the rates of entanglement generation in quantum repeaters is derived, including a study on the impacts of entanglement purification and multiplexing strategies. More specifically, we consider scenarios with as little purification as possible and we show that for sufficiently low local losses, such purifications are still more powerful than multiplexing. In a possible experimental scenario, our hybrid system can create near-maximally entangled (F=0.98) pairs over a distance of 1280 km at rates of the order of 100 Hz.

  2. The theory of hybrid stochastic algorithms

    SciTech Connect

    Kennedy, A.D. . Supercomputer Computations Research Inst.)

    1989-11-21

    These lectures introduce the family of Hybrid Stochastic Algorithms for performing Monte Carlo calculations in Quantum Field Theory. After explaining the basic concepts of Monte Carlo integration we discuss the properties of Markov processes and one particularly useful example of them: the Metropolis algorithm. Building upon this framework we consider the Hybrid and Langevin algorithms from the viewpoint that they are approximate versions of the Hybrid Monte Carlo method; and thus we are led to consider Molecular Dynamics using the Leapfrog algorithm. The lectures conclude by reviewing recent progress in these areas, explaining higher-order integration schemes, the asymptotic large-volume behaviour of the various algorithms, and some simple exact results obtained by applying them to free field theory. It is attempted throughout to give simple yet correct proofs of the various results encountered. 38 refs.

  3. Sneutrino hybrid inflation and nonthermal leptogenesis

    SciTech Connect

    Antusch, Stefan; Baumann, Jochen P.; Domcke, Valerie F.; Kostka, Philipp M. E-mail: jbaumann@mppmu.mpg.de E-mail: kostka@mppmu.mpg.de

    2010-10-01

    In sneutrino hybrid inflation the superpartner of one of the right-handed neutrinos involved in the seesaw mechanism plays the role of the inflaton field. It obtains its large mass after the ''waterfall'' phase transition which ends hybrid inflation. After this phase transition the oscillations of the sneutrino inflaton field may dominate the universe and efficiently produce the baryon asymmetry of the universe via nonthermal leptogenesis. We investigate the conditions under which inflation, with primordial perturbations in accordance with the latest WMAP results, as well as successful nonthermal leptogenesis can be realized simultaneously within the sneutrino hybrid inflation scenario. We point out which requirements successful inflation and leptogenesis impose on the seesaw parameters, i.e. on the Yukawa couplings and the mass of the right-handed (s)neutrino, and derive the predictions for the CMB observables in terms of the right-handed (s)neutrino mass and the other relevant model parameters.

  4. Locomotion control of hybrid cockroach robots

    PubMed Central

    Sanchez, Carlos J.; Chiu, Chen-Wei; Zhou, Yan; González, Jorge M.; Vinson, S. Bradleigh; Liang, Hong

    2015-01-01

    Natural systems retain significant advantages over engineered systems in many aspects, including size and versatility. In this research, we develop a hybrid robotic system using American (Periplaneta americana) and discoid (Blaberus discoidalis) cockroaches that uses the natural locomotion and robustness of the insect. A tethered control system was firstly characterized using American cockroaches, wherein implanted electrodes were used to apply an electrical stimulus to the prothoracic ganglia. Using this approach, larger discoid cockroaches were engineered into a remotely controlled hybrid robotic system. Locomotion control was achieved through electrical stimulation of the prothoracic ganglia, via a remotely operated backpack system and implanted electrodes. The backpack consisted of a microcontroller with integrated transceiver protocol, and a rechargeable battery. The hybrid discoid roach was able to walk, and turn in response to an electrical stimulus to its nervous system with high repeatability of 60%. PMID:25740855

  5. Simulation of a Hybrid Locomotion Robot Vehicle

    NASA Astrophysics Data System (ADS)

    Aarnio, P.

    2002-10-01

    This study describes a simulation process of a mobile robot. The focus is in kinematic and dynamic behavior simulations of hybrid locomotion robot vehicles. This research is motivated by the development needs of the WorkPartner field service robot. The whole robot system consists of a mobile platform and a two-hand manipulator. The robot platform, called Hybtor, is a hybrid locomotion robot capable of walking and driving by wheels as well as combining these two locomotion modes. This study describes first the general problems and their solutions in the dynamic simulation of mobile robots. A kinematic and dynamic virtual model of the Hybtor robot was built and simulations were carried out using one commercial simulation tool. Walking, wheel driven and rolking mode locomotion, which is a special hybrid locomotion style, has been simulated and analyzed. Position and force control issues during obstacle overrun and climbing were also studied.

  6. Hybrid Motion Planning with Multiple Destinations

    NASA Technical Reports Server (NTRS)

    Clouse, Jeffery

    1998-01-01

    In our initial proposal, we laid plans for developing a hybrid motion planning system that combines the concepts of visibility-based motion planning, artificial potential field based motion planning, evolutionary constrained optimization, and reinforcement learning. Our goal was, and still is, to produce a hybrid motion planning system that outperforms the best traditional motion planning systems on problems with dynamic environments. The proposed hybrid system will be in two parts the first is a global motion planning system and the second is a local motion planning system. The global system will take global information about the environment, such as the placement of the obstacles and goals, and produce feasible paths through those obstacles. We envision a system that combines the evolutionary-based optimization and visibility-based motion planning to achieve this end.

  7. Lossless hybridization between photovoltaic and thermoelectric devices

    PubMed Central

    Park, Kwang-Tae; Shin, Sun-Mi; Tazebay, Abdullah S.; Um, Han-Don; Jung, Jin-Young; Jee, Sang-Won; Oh, Min-Wook; Park, Su-Dong; Yoo, Bongyoung; Yu, Choongho; Lee, Jung-Ho

    2013-01-01

    The optimal hybridization of photovoltaic (PV) and thermoelectric (TE) devices has long been considered ideal for the efficient harnessing solar energy. Our hybrid approach uses full spectrum solar energy via lossless coupling between PV and TE devices while collecting waste energy from thermalization and transmission losses from PV devices. Achieving lossless coupling makes the power output from the hybrid device equal to the sum of the maximum power outputs produced separately from individual PV and TE devices. TE devices need to have low internal resistances enough to convey photo-generated currents without sacrificing the PV fill factor. Concomitantly, a large number of p-n legs are preferred to drive a high Seebeck voltage in TE. Our simple method of attaching a TE device to a PV device has greatly improved the conversion efficiency and power output of the PV device (~30% at a 15°C temperature gradient across a TE device). PMID:23820973

  8. Solar powered hybrid sensor module program

    NASA Technical Reports Server (NTRS)

    Johnson, J. M.; Holmes, H. K.

    1985-01-01

    Geo-orbital systems of the near future will require more sophisticated electronic and electromechanical monitoring and control systems than current satellite systems with an emphasis in the design on the electronic density and autonomy of the subsystem components. Results of a project to develop, design, and implement a proof-of-concept sensor system for space applications, with hybrids forming the active subsystem components are described. The design of the solar power hybrid sensor modules is discussed. Module construction and function are described. These modules combined low power CMOS electronics, GaAs solar cells, a crystal oscillatory standard UART data formatting, and a bidirectional optical data link into a single 1.25 x 1.25 x 0.25 inch hybrid package which has no need for electrical input or output. Several modules were built and tested. Applications of such a system for future space missions are also discussed.

  9. Aerodynamic Shape Optimization Using Hybridized Differential Evolution

    NASA Technical Reports Server (NTRS)

    Madavan, Nateri K.

    2003-01-01

    An aerodynamic shape optimization method that uses an evolutionary algorithm known at Differential Evolution (DE) in conjunction with various hybridization strategies is described. DE is a simple and robust evolutionary strategy that has been proven effective in determining the global optimum for several difficult optimization problems. Various hybridization strategies for DE are explored, including the use of neural networks as well as traditional local search methods. A Navier-Stokes solver is used to evaluate the various intermediate designs and provide inputs to the hybrid DE optimizer. The method is implemented on distributed parallel computers so that new designs can be obtained within reasonable turnaround times. Results are presented for the inverse design of a turbine airfoil from a modern jet engine. (The final paper will include at least one other aerodynamic design application). The capability of the method to search large design spaces and obtain the optimal airfoils in an automatic fashion is demonstrated.

  10. Simultaneous covalent and noncovalent hybrid polymerizations

    NASA Astrophysics Data System (ADS)

    Yu, Zhilin; Tantakitti, Faifan; Yu, Tao; Palmer, Liam C.; Schatz, George C.; Stupp, Samuel I.

    2016-01-01

    Covalent and supramolecular polymers are two distinct forms of soft matter, composed of long chains of covalently and noncovalently linked structural units, respectively. We report a hybrid system formed by simultaneous covalent and supramolecular polymerizations of monomers. The process yields cylindrical fibers of uniform diameter that contain covalent and supramolecular compartments, a morphology not observed when the two polymers are formed independently. The covalent polymer has a rigid aromatic imine backbone with helicoidal conformation, and its alkylated peptide side chains are structurally identical to the monomer molecules of supramolecular polymers. In the hybrid system, covalent chains grow to higher average molar mass relative to chains formed via the same polymerization in the absence of a supramolecular compartment. The supramolecular compartments can be reversibly removed and re-formed to reconstitute the hybrid structure, suggesting soft materials with novel delivery or repair functions.

  11. Simultaneous covalent and noncovalent hybrid polymerizations.

    PubMed

    Yu, Zhilin; Tantakitti, Faifan; Yu, Tao; Palmer, Liam C; Schatz, George C; Stupp, Samuel I

    2016-01-29

    Covalent and supramolecular polymers are two distinct forms of soft matter, composed of long chains of covalently and noncovalently linked structural units, respectively. We report a hybrid system formed by simultaneous covalent and supramolecular polymerizations of monomers. The process yields cylindrical fibers of uniform diameter that contain covalent and supramolecular compartments, a morphology not observed when the two polymers are formed independently. The covalent polymer has a rigid aromatic imine backbone with helicoidal conformation, and its alkylated peptide side chains are structurally identical to the monomer molecules of supramolecular polymers. In the hybrid system, covalent chains grow to higher average molar mass relative to chains formed via the same polymerization in the absence of a supramolecular compartment. The supramolecular compartments can be reversibly removed and re-formed to reconstitute the hybrid structure, suggesting soft materials with novel delivery or repair functions. PMID:26823427

  12. Metallo/clusto hybridized supramolecular polymers.

    PubMed

    Li, Haolong; Wu, Lixin

    2014-12-01

    The introduction of metal centers to a supramolecular polymer system is an important approach to fabricate hybrid supramolecular polymers with synergistic properties between their inorganic and organic components, which is mainly realized through two strategies: one is the embedment of metal ions through metal-ligand coordination to form metallo-supramolecular polymers (MSPs); the other is using metal-containing clusters as hybrid building blocks to prepare clusto-supramolecular polymers (CSPs). The available paradigms of MSPs and CSPs not only exhibit the unique functions of metal centers but also hold the good processing ability and the stimuli-responsibility of dynamically bonded polymeric structures, thus representing a new class of hybrid soft materials. In this review, the development and recent progress of MSPs and CSPs are discussed in detail, including their structure design, synthetic procedures and related properties. Finally, challenges and potential areas in metal-containing supramolecular polymers are outlooked. PMID:25301009

  13. Bisexual Hybrid Sterility in DROSOPHILA MELANOGASTER

    PubMed Central

    Colgan, D. J.; Angus, D. S.

    1978-01-01

    A new type of hybrid sterility was investigated in D. melanogaster . Matings between strain 27 males from Para Wirra, South Australia, and Canton-S females produce 70–80% fully sterile male and female progeny. Strain 27 males produce sterile progeny when crossed to females of other geographic origins, but produce fertile progeny when crossed to a second sympatric strain. The sterility is avoided by lower rearing temperatures. Heat shock and tetracycline produce no improvement in the fertility of the hybrids. Normal flies produce sterile progeny when injected with, or fed, homogenates of sterile flies. A combination of maternal and paternal factors may interact to produce sterile hybrids by inhibiting gonad development. PMID:17248832

  14. Hybrid Beamforming and Steering With Reconfigurable Arrays

    PubMed Central

    Hooi, Fong Ming; Thomenius, Kai E.; Fisher, Rayette; Carson, Paul L.

    2010-01-01

    Reconfigurable arrays offer an advantage over traditional ultrasound arrays because of their flexibility in channel selection. To improve ultrasound beamforming and coverage through beam steering, we propose a hybrid beamforming technique to elongate the depth of focus of transmit beams and a method of element selection that improves steering capabilities that take advantage of array reconfigurability using annular rings. A local minimization technique to optimize the hybrid aperture is discussed in this paper. The chosen hybrid apertures covering four focal zones result in improved range in depth of focus when compared with pure spherical beams via point spread functions (PSF) and lesion signal-tonoise ratio (LSNR) calculations. Improvements were statistically significant at focal depth extremes. Our method of beam steering utilizing a quantized phase delay selection to minimize delay errors indicated better performance by removing an artifact present with traditional ringed element selection. PMID:20529707

  15. Hybridized/coupled multiple resonances in nacre

    NASA Astrophysics Data System (ADS)

    Choi, Seung Ho; Kim, Young L.

    2014-01-01

    We report that nacre (also known as mother-of-pearl), a wondrous nanocomposite found in nature, is a rich photonic nanomaterial allowing the experimental realization of collective excitation and light amplification via coupled states. Localized modes in three-dimensional complex media are typically isolated in frequency and space. However, multiple local resonances can be hybridized in multilayered nanostructures of nacre so that the effective cavity size for efficient disordered resonators is scaled up. Localized modes in hybridized states in nacre are overlapped in frequency with similar shapes in space, thus being collectively excited and synergistically amplified. These hybridized states boost light amplification, leading to stable and regular multimode lasing at low excitation energy. The simplicity of ameliorating disordered resonators by mimicking nacre can further serve as platforms for developing cost-effective photonic systems and provide materials for fundamental research on complex media.

  16. Vibrations of Hybrid Ceramic Ball Bearings

    NASA Astrophysics Data System (ADS)

    Ohta, H.; Kobayashi, K.

    1996-05-01

    Hybrid ceramic ball bearings with silicone nitride balls and steel rings were tested, and the vibration characteristics were compared with those of conventional steel ball bearings. In this study, two types of hybrid ceramic ball bearings and two types of conventional steel ball bearings were used as test bearings. The test bearings were operated under several rotational speeds and axial loads. The radial and the axial vibrations on the outer ring of each test bearing were detected by an accelerometer. The vibrations were examined by using an FFT analyzer. From the experimental results, analysis and discussion, the vibration characteristics of hybrid ceramic ball bearings, compared with those of conventional steel ball bearings, are explained.

  17. Hybrid SPECT/CT imaging in neurology.

    PubMed

    Ciarmiello, Andrea; Giovannini, Elisabetta; Meniconi, Martina; Cuccurullo, Vincenzo; Gaeta, Maria Chiara

    2014-01-01

    In recent years, the SPECT/CT hybrid modality has led to a rapid development of imaging techniques in nuclear medicine, opening new perspectives for imaging staff and patients as well. However, while, the clinical role of positron emission tomography-computed tomography (PET-CT) is well consolidated, the diffusion and the consequent value of single-photon emission tomography-computed tomography (SPECT-CT) has yet to be weighed, Hence, there is a need for a careful analysis, comparing the "potential" benefits of the hybrid modality with the "established" ones of the standalone machine. The aim of this article is to analyze the impact of this hybrid tool on the diagnosis of diseases of the central nervous system, comparing strengths and weaknesses of both modalities through the use of SWOT analysis. PMID:25143053

  18. Hybrid Rocket Experiment Station for Capstone Design

    NASA Technical Reports Server (NTRS)

    Conley, Edgar; Hull, Bethanne J.

    2012-01-01

    Portable hybrid rocket motors and test stands can be seen in many papers but none have been reported on the design or instrumentation at such a small magnitude. The design of this hybrid rocket and test stand is to be small and portable (suitcase size). This basic apparatus will be used for demonstrations in rocket propulsion. The design had to include all of the needed hardware to operate the hybrid rocket unit (with the exception of the external Oxygen tank). The design of this project includes making the correlation between the rocket's thrust and its size, the appropriate transducers (physical size, resolution, range, and cost), compatability with a laptop analog card, the ease of setup, and its portability.

  19. Locomotion control of hybrid cockroach robots.

    PubMed

    Sanchez, Carlos J; Chiu, Chen-Wei; Zhou, Yan; González, Jorge M; Vinson, S Bradleigh; Liang, Hong

    2015-04-01

    Natural systems retain significant advantages over engineered systems in many aspects, including size and versatility. In this research, we develop a hybrid robotic system using American (Periplaneta americana) and discoid (Blaberus discoidalis) cockroaches that uses the natural locomotion and robustness of the insect. A tethered control system was firstly characterized using American cockroaches, wherein implanted electrodes were used to apply an electrical stimulus to the prothoracic ganglia. Using this approach, larger discoid cockroaches were engineered into a remotely controlled hybrid robotic system. Locomotion control was achieved through electrical stimulation of the prothoracic ganglia, via a remotely operated backpack system and implanted electrodes. The backpack consisted of a microcontroller with integrated transceiver protocol, and a rechargeable battery. The hybrid discoid roach was able to walk, and turn in response to an electrical stimulus to its nervous system with high repeatability of 60%. PMID:25740855

  20. Three-dimensional hybrid vortex solitons

    NASA Astrophysics Data System (ADS)

    Driben, Rodislav; Kartashov, Yaroslav V.; Malomed, Boris A.; Meier, Torsten; Torner, Lluis

    2014-06-01

    We show, by means of numerical and analytical methods, that media with a repulsive nonlinearity which grows from the center to the periphery support a remarkable variety of previously unknown complex stationary and dynamical three-dimensional (3D) solitary-wave states. Peanut-shaped modulation profiles give rise to vertically symmetric and antisymmetric vortex states, and novel stationary hybrid states, built of top and bottom vortices with opposite topological charges, as well as robust dynamical hybrids, which feature stable precession of a vortex on top of a zero-vorticity soliton. The analysis reveals stability regions for symmetric, antisymmetric, and hybrid states. In addition, bead-shaped modulation profiles give rise to the first example of exact analytical solutions for stable 3D vortex solitons. The predicted states may be realized in media with a controllable cubic nonlinearity, such as Bose-Einstein condensates.

  1. Vibron and phonon hybridization in dielectric nanostructures.

    PubMed

    Preston, Thomas C; Signorell, Ruth

    2011-04-01

    Plasmon hybridization theory has been an invaluable tool in advancing our understanding of the optical properties of metallic nanostructures. Through the prism of molecular orbital theory, it allows one to interpret complex structures as "plasmonic molecules" and easily predict and engineer their electromagnetic response. However, this formalism is limited to conducting particles. Here, we present a hybridization scheme for the external and internal vibrations of dielectric nanostructures that provides a straightforward understanding of the infrared signatures of these particles through analogy to existing hybridization models of both molecular orbitals and plasmons extending the range of applications far beyond metallic nanostructures. This method not only provides a qualitative understanding, but also allows for the quantitative prediction of vibrational spectra of complex nanoobjects from well-known spectra of their primitive building blocks. The examples of nanoshells illustrate how spectral features can be understood in terms of symmetry, number of nodal planes, and scale parameters. PMID:21422288

  2. The lightest hybrid meson supermultiplet in QCD

    SciTech Connect

    Dudek, Jozef J

    2011-10-01

    We interpret the spectrum of meson states recently obtained in non-perturbative lattice QCD calculations in terms of constituent quark-antiquark bound states and states, called 'hybrids', in which the q{bar q} pair is supplemented by an excitation of the gluonic field. We identify a lightest supermultiplet of hybrid mesons with J{sup PC} = (0,1,2){sup {-+}}, 1{sup -} built from a gluonic excitation of chromomagnetic character coupled to q{bar q} in an S-wave. The next lightest hybrids are suggested to be quark orbital excitations with the same gluonic excitation, while the next distinct gluonic excitation is significantly heavier. Existing models of gluonic excitations are compared to these findings and possible phenomenological consequences explored.

  3. Quinoline-based antimalarial hybrid compounds.

    PubMed

    Vandekerckhove, Stéphanie; D'hooghe, Matthias

    2015-08-15

    Quinoline-containing compounds, such as quinine and chloroquine, have a long-standing history as potent antimalarial agents. However, the increasing resistance of the Plasmodium parasite against these drugs and the lack of licensed malaria vaccines have forced chemists to develop synthetic strategies toward novel biologically active molecules. A strategy that has attracted considerable attention in current medicinal chemistry is based on the conjugation of two biologically active molecules into one hybrid compound. Since quinolines are considered to be privileged antimalarial building blocks, the synthesis of quinoline-containing antimalarial hybrids has been elaborated extensively in recent years. This review provides a literature overview of antimalarial hybrid molecules containing a quinoline core, covering publications between 2009 and 2014. PMID:25593097

  4. Chromosome doubling in vine cacti hybrids.

    PubMed

    Tel-Zur, N; Abbo, S; Bar-Zvi, D; Mizrahi, Y

    2003-01-01

    We performed reciprocal crosses between the tetraploid Selenicereus megalanthus and the diploid Hylocereus species, H. undatus and H. polyrhizus. S. megalanthus x H. undatus gave rise to viable hexaploids and 6x-aneuploid hybrids rather than to the expected triploids. No genuine hybrids were obtained in the reciprocal cross. The pollen diameter of the tetraploid S. megalanthus varied widely, indicating the occurrence of unreduced gametes, while that of H. undatus pollen was very uniform, indicating an extremely low frequency of unreduced gametes. This finding suggests that the hexaploids were formed by chromosome doubling after the formation of the hybrid triploid zygote rather than by fusion of unreduced gametes of the two species. PMID:12920104

  5. High-MTF hybrid ferroelectric IRFPA

    NASA Astrophysics Data System (ADS)

    Evans, Scott B.; Hayden, Terrence

    1998-07-01

    Low cost, uncooled hybrid infrared focal plane arrays (IRFPA's) are in full-scale production at Raytheon Systems Company (RSC), formerly Texas Instruments Defense Systems and Electronics Group. Detectors consist of reticulated ceramic barium strontium titanate (BST) arrays of 320 X 240 pixels on 48.5 micrometer pitch. The principal performance shortcoming of the hybrid arrays has been low MTF due to thermal crosstalk between pixels. In the past two years, significant improvements have been made to increase MTF making hybrids more competitive in performance with monolithic arrays. The improvements are (1) the reduction of the thickness of the IR absorbing layer electrode that maintains electrical continuity and increases thermal isolation between pixels, (2) reduction of the electrical crosstalk from the ROIC, and (3) development of a process to increase the thermal path-length between pixels called 'elevated optical coat.' This paper describes all three activities and their efficacy. Also discussed is the uncooled IRFPA production capability at RSC.

  6. Evidence for a bimodal distribution of hybrid indices in a hybrid zone with high admixture

    PubMed Central

    McKenzie, Jessica L.; Dhillon, Rashpal S.; Schulte, Patricia M.

    2015-01-01

    The genetic structure of a hybrid zone can provide insights into the relative roles of the various factors that maintain the zone. Here, we use a multilocus approach to characterize a hybrid zone between two subspecies of killifish (Fundulus heteroclitus, Walbaum 1792) found along the Atlantic coast of North America. We first analysed clinal variation along the Atlantic coast using a single-nucleotide polymorphism in the mitochondrial DNA (mtDNA) displacement loop (D-loop) and a panel of nine nuclear microsatellite markers. A model constraining all clines to the same width and centre was not significantly different from a model in which the clines were allowed to vary independently. Locus-by-locus analysis indicated that the majority of nuclear clines shared the same centre as the mtDNA cline, and the widths of these clines were also narrower than that predicted by a neutral model, suggesting that selection is operating to maintain the hybrid zone. However, two of the nuclear clines had widths greater than the neutral prediction and had centres that were displaced relative to the mtDNA cline centre. We also found that a marsh located near the centre of the mtDNA cline demonstrated a bimodal distribution of nuclear hybrid index values, suggesting a deficit of first-generation hybrids and backcrossed genotypes. Thus, selection against hybrid genotypes may be playing a role in maintaining this hybrid zone and the associated steep nuclear and mtDNA clines. PMID:27019720

  7. Homoploid hybrid origin of Yucca gloriosa: intersectional hybrid speciation in Yucca (Agavoideae, Asparagaceae)

    PubMed Central

    Rentsch, Jeremy D; Leebens-Mack, Jim

    2012-01-01

    There is a growing appreciation for the importance of hybrid speciation in angiosperm evolution. Here, we show that Yucca gloriosa (Asparagaceae: Agavoideae) is the product of intersectional hybridization between Y. aloifolia and Y. filamentosa. These species, all named by Carl Linnaeus, exist in sympatry along the southeastern Atlantic coast of the United States. Yucca gloriosa was found to share a chloroplast haplotype with Y. aloifolia in all populations sampled. In contrast, nuclear gene-based microsatellite markers in Y. gloriosa are shared with both parents. The hybrid origin of Y. gloriosa is supported by multilocus analyses of the nuclear microsatellite markers including principal coordinates analysis (PCO), maximum-likelihood hybrid index scoring (HINDEX), and Bayesian cluster analysis (STRUCTURE). The putative parental species share only one allele at a single locus, suggesting there is little to no introgressive gene flow occurring between these species and Y. gloriosa. At the same time, diagnostic markers are segregating in Y. gloriosa populations. Lack of variation in the chloroplast of Y. aloifolia, the putative maternal parent, makes it difficult to rule out multiple hybrid origins of Y. gloriosa, but allelic variation at nuclear loci can be explained by a single hybrid origin of Y. gloriosa. Overall, these data provide strong support for the homoploid hybrid origin of Y. gloriosa. PMID:23139880

  8. Homoploid hybrid origin of Yucca gloriosa: intersectional hybrid speciation in Yucca (Agavoideae, Asparagaceae).

    PubMed

    Rentsch, Jeremy D; Leebens-Mack, Jim

    2012-09-01

    There is a growing appreciation for the importance of hybrid speciation in angiosperm evolution. Here, we show that Yucca gloriosa (Asparagaceae: Agavoideae) is the product of intersectional hybridization between Y. aloifolia and Y. filamentosa. These species, all named by Carl Linnaeus, exist in sympatry along the southeastern Atlantic coast of the United States. Yucca gloriosa was found to share a chloroplast haplotype with Y. aloifolia in all populations sampled. In contrast, nuclear gene-based microsatellite markers in Y. gloriosa are shared with both parents. The hybrid origin of Y. gloriosa is supported by multilocus analyses of the nuclear microsatellite markers including principal coordinates analysis (PCO), maximum-likelihood hybrid index scoring (HINDEX), and Bayesian cluster analysis (STRUCTURE). The putative parental species share only one allele at a single locus, suggesting there is little to no introgressive gene flow occurring between these species and Y. gloriosa. At the same time, diagnostic markers are segregating in Y. gloriosa populations. Lack of variation in the chloroplast of Y. aloifolia, the putative maternal parent, makes it difficult to rule out multiple hybrid origins of Y. gloriosa, but allelic variation at nuclear loci can be explained by a single hybrid origin of Y. gloriosa. Overall, these data provide strong support for the homoploid hybrid origin of Y. gloriosa. PMID:23139880

  9. Evidence for a bimodal distribution of hybrid indices in a hybrid zone with high admixture.

    PubMed

    McKenzie, Jessica L; Dhillon, Rashpal S; Schulte, Patricia M

    2015-12-01

    The genetic structure of a hybrid zone can provide insights into the relative roles of the various factors that maintain the zone. Here, we use a multilocus approach to characterize a hybrid zone between two subspecies of killifish (Fundulus heteroclitus, Walbaum 1792) found along the Atlantic coast of North America. We first analysed clinal variation along the Atlantic coast using a single-nucleotide polymorphism in the mitochondrial DNA (mtDNA) displacement loop (D-loop) and a panel of nine nuclear microsatellite markers. A model constraining all clines to the same width and centre was not significantly different from a model in which the clines were allowed to vary independently. Locus-by-locus analysis indicated that the majority of nuclear clines shared the same centre as the mtDNA cline, and the widths of these clines were also narrower than that predicted by a neutral model, suggesting that selection is operating to maintain the hybrid zone. However, two of the nuclear clines had widths greater than the neutral prediction and had centres that were displaced relative to the mtDNA cline centre. We also found that a marsh located near the centre of the mtDNA cline demonstrated a bimodal distribution of nuclear hybrid index values, suggesting a deficit of first-generation hybrids and backcrossed genotypes. Thus, selection against hybrid genotypes may be playing a role in maintaining this hybrid zone and the associated steep nuclear and mtDNA clines. PMID:27019720

  10. Hybrid stochastic simplifications for multiscale gene networks

    PubMed Central

    Crudu, Alina; Debussche, Arnaud; Radulescu, Ovidiu

    2009-01-01

    Background Stochastic simulation of gene networks by Markov processes has important applications in molecular biology. The complexity of exact simulation algorithms scales with the number of discrete jumps to be performed. Approximate schemes reduce the computational time by reducing the number of simulated discrete events. Also, answering important questions about the relation between network topology and intrinsic noise generation and propagation should be based on general mathematical results. These general results are difficult to obtain for exact models. Results We propose a unified framework for hybrid simplifications of Markov models of multiscale stochastic gene networks dynamics. We discuss several possible hybrid simplifications, and provide algorithms to obtain them from pure jump processes. In hybrid simplifications, some components are discrete and evolve by jumps, while other components are continuous. Hybrid simplifications are obtained by partial Kramers-Moyal expansion [1-3] which is equivalent to the application of the central limit theorem to a sub-model. By averaging and variable aggregation we drastically reduce simulation time and eliminate non-critical reactions. Hybrid and averaged simplifications can be used for more effective simulation algorithms and for obtaining general design principles relating noise to topology and time scales. The simplified models reproduce with good accuracy the stochastic properties of the gene networks, including waiting times in intermittence phenomena, fluctuation amplitudes and stationary distributions. The methods are illustrated on several gene network examples. Conclusion Hybrid simplifications can be used for onion-like (multi-layered) approaches to multi-scale biochemical systems, in which various descriptions are used at various scales. Sets of discrete and continuous variables are treated with different methods and are coupled together in a physically justified approach. PMID:19735554

  11. Quinone cross-linked polysaccharide hybrid fiber.

    PubMed

    Kuboe, Yoshiko; Tonegawa, Hitomi; Ohkawa, Kousaku; Yamamoto, Hiroyuki

    2004-01-01

    The present article describes the synthesis of the N-(Lys-Gly-Tyr-Gly)-chitosan using the water-soluble active ester method, the preparation of the N-(Lys-Gly-Tyr-Gly)-chitosan-gellan hybrid fibers, and the reinforcement of the hybrid fibers by enzymatic cross-linking between the N-grafted peptides chains of chitosan. The cationic polysaccharide chitosan was treated with Boc-Lys(Z)-Gly-Tyr(Bzl)-Gly (4-hydroxyphenyl)dimethylsulfonium methyl sulfate ester in DMF-0.15 M acetic acid to incorporate the peptides into the side chain amino groups of chitosan followed by the acidic removals of the Z and Bzl groups. The degrees of N substitution were estimated to be 2.0 and 10 molar % by changing the molar ratios of the amino groups of the parent chitosan and the active ester. The resulting cationic N-(Lys-Gly-Tyr-Gly)-chitosan was spun into the hybrid fibers with the anionic polysaccharide gellan in water. The tensile strengths of the N-(Lys-Gly-Tyr-Gly)-chitosan hybrid fibers were superior to those of the original chitosan-gellan fibers. The mechanical strengths of the hybrid fibers further increased upon enzymatic oxidation using tyrosinase. Based on these results, we concluded that the covalent cross-linking due to the enzyme oxidation between the grafted peptides significantly contributed to reinforcement of the polysaccharide hybrid fibers. The present results afford a new methodology for the reinforcement achieved by the polymer modification inspired by a biological process. PMID:15002994

  12. Frontier battery development for hybrid vehicles

    PubMed Central

    2012-01-01

    Background Interest in hybrid-electric vehicles (HEVs) has recently spiked, partly due to an increasingly negative view toward the U.S. foreign oil dependency and environmental concerns. Though HEVs are becoming more common, they have a significant price premium over gasoline-powered vehicles. One of the primary drivers of this “hybrid premium” is the cost of the vehicles’ batteries. This paper focuses on these batteries used in hybrid vehicles, examines the types of batteries used for transportation applications and addresses some of the technological, environmental and political drivers in battery development and the deployment of HEVs. Methods This paper examines the claim, often voiced by HEV proponents, that by taking into account savings on gasoline and vehicle maintenance, hybrid cars are cheaper than traditional gasoline cars. This is done by a quantitative benefit-cost analysis, in addition to qualitative benefit-cost analysis from political, technological and environmental perspectives. Results The quantitative benefit-cost analysis shows that, taking account of all costs for the life of the vehicle, hybrid cars are in fact more expensive than gasoline-powered vehicles; however, after five years, HEVs will break even with gasoline cars. Conclusions Our results show that it is likely that after 5 years, using hybrid vehicles should be cheaper in effect and yield a positive net benefit to society. There are a number of externalities that could significantly impact the total social cost of the car. These externalities can be divided into four categories: environmental, industrial, R&D and political. Despite short-term implications and hurdles, increased HEV usage forecasts a generally favorable long-term net benefit to society. Most notably, increasing HEV usage could decrease greenhouse gas emissions, while also decreasing U.S. dependence on foreign oil. PMID:22540987

  13. Genetic identification of spotted owls, barred owls, and their hybrids: Legal implications of hybrid identity

    USGS Publications Warehouse

    Haig, Susan M.; Wennerberg, L.; Mullins, Thomas D.; Forsman, E.D.; Trail, P.

    2004-01-01

    Recent population expansion of Barred Owls ( Strix varia) into western North America has led to concern that they may compete with and further harm the Northern Spotted Owl ( S. occidentalis caurina), which is already listed as threatened under the U.S. Endangered Species Act (ESA). Because they hybridize, there is a legal need under the ESA for forensic identification of both species and their hybrids. We used mitochondrial control-region DNA and amplified fragment-length polymorphism (AFLP) analyses to assess maternal and biparental gene flow in this hybridization process. Mitochondrial DNA sequences (524 base pairs) indicated large divergence between Barred and Spotted Owls (13.9%). Further, the species formed two distinct clades with no signs of previous introgression. Fourteen diagnostic AFLP bands also indicated extensive divergence between the species, including markers differentiating them. Principal coordinate analyses and assignment tests clearly supported this differentiation. We found that hybrids had unique genetic combinations, including AFLP markers from both parental species, and identified known hybrids as well as potential hybrids with unclear taxonomic status. Our analyses corroborated the findings of extensive field studies that most hybrids genetically sampled resulted from crosses between female Barred Owls and male Spotted Owls. These genetic markers make it possible to clearly identify these species as well as hybrids and can now be used for research, conservation, and law enforcement. Several legal avenues may facilitate future conservation of Spotted Owls and other ESA-listed species that hybridize, including the ESA similarity-of-appearance clause (section 4[e]) and the Migratory Bird Treaty Act. The Migratory Bird Treaty Act appears to be the most useful route at this time.

  14. Species introduction promotes hybridization and introgression in Coregonus: is there sign of selection against hybrids?

    PubMed

    Kahilainen, Kimmo K; Ostbye, Kjartan; Harrod, Chris; Shikano, Takahito; Malinen, Tommi; Merilä, Juha

    2011-09-01

    Species introductions are considered one of the major drivers of biodiversity loss via ecological interactions and genetic admixture with local fauna. We examined two well-recognized fish species, native whitefish (Coregonus lavaretus) and introduced vendace (Coregonus albula), as well as their morphological hybrids in a single lake to test for selection against hybrids and backcrosses in the wild. A representative random subsample of 693 individuals (27.8%) was taken from the total catch of coregonids. This subsample was examined with the aim to select c. 50 individuals of pure whitefish (n = 52), pure vendace (n = 55) and putative hybrid (n = 19) for genetic analyses. The subsequent microsatellites and mitochondrial (mt) DNA analyses provided compelling evidence of hybridization and introgression. Of the 126 fish examined, four were found to be F(1) , 14 backcrosses to whitefish and seven backcrosses to vendace. The estimates of historical gene flow suggested higher rates from introduced vendace into native whitefish than vice versa, whereas estimates of contemporary gene flow were equal. Mitochondrial introgression was skewed, with 18 backcrosses having vendace mtDNA and only three with whitefish mtDNA. Hybrids and backcrosses had intermediate morphology and niche utilization compared with parental species. No evidence of selection against hybrids or backcrosses was apparent, as both hybrid and backcross growth rates and fecundities were high. Hybrids (F(1) ) were only detected in 2 year-classes, suggesting temporal variability in mating between vendace and whitefish. However, our data show that hybrids reached sexual maturity and reproduced actively, with backcrosses recorded from six consecutive year-classes, whereas no F(2) individuals were found. The results indicate widespread introgression, as 10.8% of coregonids were estimated to be backcrosses. PMID:21831252

  15. Generation of auroral kilometric radiation in upper hybrid wave-lower hybrid soliton interaction

    SciTech Connect

    Pottelette, R.; Dubouloz, N. ); Treumann, R.A. )

    1992-08-01

    Sporadic bursts of auroral kilometric radiation (AKR) associated with strong bursty electrostatic turbulence in the vicinity of the lower hybrid frequency have been frequently recorded in the AKR source region by the Viking satellite. The variation time scale of these emissions is typically 1 s, long enough for lower hybrid waves to grow to amplitudes of several hundred millivolts per meter and to evolve nonlinearly into solitons. On the basis on these observations it is suggested that formation of lower hybrid solitons may play a role in the generation of AKR. A theoretical model is proposed which is based on the direct acceleration of electrons in the combined lower hybrid soliton and upper hybrid wave fields. The solitons act as sporadic, localized antennas allowing for efficient conversions of the electrostatic energy stored in upper hybrid waves into electromagnetic radiation at a frequency above the X mode cutoff. Excitation of lower hybrid waves is due to the presence of energetic electron beams in the auroral zone found to be associated with steep plasma density gradients. Upper hybrid waves can be excited by a population of energetic electrons with loss cone distributions. The power of the electromagnetic radiation obtained is only noticeable in regions where the plasma frequency is less than the electron gyrofrequency. The theory predicts spectral power densities of the order of 10{sup {minus}11} to 10{sup {minus}9} W m{sup {minus}2} Hz{sup {minus}1} in the source region, in good agreement with the Viking observations. The sporadic nature of the radiation derives from lower hybrid soliton collapses which occur on {approximately}1-s time scales.

  16. Strength of adhesive-bonded hybrid structures

    NASA Technical Reports Server (NTRS)

    Kirschke, L.; Prinz, R.; Schnell, H.

    1979-01-01

    Structures prepared from materials with different thermal and mechanical properties by means of fiber-strengthened binders can fail in a number of ways. The present lecture is focused on failures through debonding at the metal or at the fiber-reinforced plastic. A method for calculating the stress distribution in adhesive layers as a function of the load is outlined, and its usefulness in providing insight into the behavior of bonds in hybrid structures is noted. Means of eliminating the unfavorable effects of temperature, humidity, creep and relaxation on the bonds in the manufacture of hybrid structures are examined, along with test methods developed for such structures.

  17. Hybridizing matter-wave and classical accelerometers

    SciTech Connect

    Lautier, J.; Volodimer, L.; Hardin, T.; Merlet, S.; Lours, M.; Pereira Dos Santos, F.; Landragin, A.

    2014-10-06

    We demonstrate a hybrid accelerometer that benefits from the advantages of both conventional and atomic sensors in terms of bandwidth (DC to 430 Hz) and long term stability. First, the use of a real time correction of the atom interferometer phase by the signal from the classical accelerometer enables to run it at best performance without any isolation platform. Second, a servo-lock of the DC component of the conventional sensor output signal by the atomic one realizes a hybrid sensor. This method paves the way for applications in geophysics and in inertial navigation as it overcomes the main limitation of atomic accelerometers, namely, the dead times between consecutive measurements.

  18. Hybrid piezoelectric energy harvesting transducer system

    NASA Technical Reports Server (NTRS)

    Xu, Tian-Bing (Inventor); Jiang, Xiaoning (Inventor); Su, Ji (Inventor); Rehrig, Paul W. (Inventor); Hackenberger, Wesley S. (Inventor)

    2008-01-01

    A hybrid piezoelectric energy harvesting transducer system includes: (a) first and second symmetric, pre-curved piezoelectric elements mounted separately on a frame so that their concave major surfaces are positioned opposite to each other; and (b) a linear piezoelectric element mounted separately on the frame and positioned between the pre-curved piezoelectric elements. The pre-curved piezoelectric elements and the linear piezoelectric element are spaced from one another and communicate with energy harvesting circuitry having contact points on the frame. The hybrid piezoelectric energy harvesting transducer system has a higher electromechanical energy conversion efficiency than any known piezoelectric transducer.

  19. Expansion effects on solar wind hybrid simulations

    SciTech Connect

    Parashar, Tulasi N.; Velli, Marco; Goldstein, Bruce E.

    2013-06-13

    Ion kinetic simulations of the solar wind using hybrid codes can model local wave input, heating and instabilities, but generally do not include long term evolution effects in the expanding solar wind. We further develop the expanding box model used in earlier studies to include the mirror force effects and study their role in the evolution of the proton distribution functions in the outer corona and inner heliosphere. The mirror force, significant in the acceleration region of the solar wind, is required for consistency with the conservation of magnetic moment of particles in the expanding wind. We present preliminary results from the modified 1D expanding box hybrid (EBHM) simulations.

  20. Hybrid nanoantennas for directional emission enhancement

    SciTech Connect

    Rusak, Evgenia; Staude, Isabelle Decker, Manuel; Sautter, Jürgen; Miroshnichenko, Andrey E.; Powell, David A.; Neshev, Dragomir N.; Kivshar, Yuri S.

    2014-12-01

    Plasmonic and dielectric nanoparticles offer complementary strengths regarding their use as optical antenna elements. While plasmonic nanoparticles are well-known to provide strong decay rate enhancement for localized emitters, all-dielectric nanoparticles can enable high directivity combined with low losses. Here, we suggest a hybrid metal-dielectric nanoantenna consisting of a gold nanorod and a silicon nanodisk, which combines all these advantages. Our numerical analysis reveals a giant enhancement of directional emission together with simultaneously high radiation efficiency (exceeding 70%). The suggested hybrid nanoantenna has a subwavelength footprint, and all parameters and materials are chosen to be compatible with fabrication by two-step electron-beam lithography.

  1. Superconductor-Diamond Hybrid Quantum System

    NASA Astrophysics Data System (ADS)

    Semba, Kouichi; Yoshihara, Fumiki; Johansson, Jan E. S.; Zhu, Xiaobo; Mizuochi, Norikazu; Munro, William J.; Saito, Shiro; Kakuyanagi, Kosuke; Matsuzaki, Yuichiro

    This chapter describes recent progress on research into superconducting flux qubit, NV diamond, and superconductor-diamond hybrid quantum systems. First, we describe important physical properties of superconducting macroscopic artificial atoms i.e., the tunability of the qubit energy level spacing, the coherence property, an example of strong coupling to another quantum system such as an LC harmonic oscillator, and qubit state readout through a Josephson bifurcation amplifier. We then introduce the NV center in diamond as an intriguing candidate for quantum information processing, which offers excellent multiple accessibility via visible light, microwaves and magnetic fields. Finally, we describe the superconducting flux qubit - NV centers in a diamond hybrid quantum system.

  2. Hybrid Extrinsic Silicon Focal Plane Architecture

    NASA Astrophysics Data System (ADS)

    Pommerrenig, D. H.; Meinhardt, T.; Lowe, J.

    1981-02-01

    Large-area focal planes require mechanical assembly techniques which must be compatible with optical alignment, minimum deadspace, and cryogenic requirements in order to achieve optimum performance. Hybrid extrinsic silicon has been found particularly suitable for such an application. It will be shown that by choosing a large-area extrinsic silicon detector array which is hybrid-mated to a multiplicity of multiplexers a very cost-effective and high-density focal plane module can be assembled. Other advantages of this approach are inherent optical alignment and excellent performance.

  3. Lewis hybrid computing system, users manual

    NASA Technical Reports Server (NTRS)

    Bruton, W. M.; Cwynar, D. S.

    1979-01-01

    The Lewis Research Center's Hybrid Simulation Lab contains a collection of analog, digital, and hybrid (combined analog and digital) computing equipment suitable for the dynamic simulation and analysis of complex systems. This report is intended as a guide to users of these computing systems. The report describes the available equipment' and outlines procedures for its use. Particular is given to the operation of the PACER 100 digital processor. System software to accomplish the usual digital tasks such as compiling, editing, etc. and Lewis-developed special purpose software are described.

  4. Lower Hybrid to Whistler Wave Conversion

    SciTech Connect

    Winske, Dan

    2012-07-16

    In this presentation we discuss recent work concerning the conversion of whistler waves to lower hybrid waves (as well as the inverse process). These efforts have been motivated by the issue of attenuation of upward propagating whistler waves in the ionosphere generated by VLF transmitters on the ground, i.e., the 'Starks 20 db' problem, which affects the lifetimes of energetic electrons trapped in the geomagnetic field at low magnetic altitude (L). We discuss recent fluid and kinetic plasma simulations as well as ongoing experiments at UCLA to quantify linear and nonlinear mode conversion of lower hybrid to whistler waves.

  5. Italian hybrid and fission reactors scenario analysis

    SciTech Connect

    Ciotti, M.; Manzano, J.; Sepielli, M.

    2012-06-19

    Italy is a country where a long tradition of studies both in the fission and fusion field is consolidated; nevertheless a strong public opinion concerned with the destination of the Spent Nuclear Fuel hinders the development of nuclear power. The possibility to a severe reduction of the NSF mass generated from a fleet of nuclear reactors employing an hypothetical fusionfission hybrid reactor has been investigated in the Italian framework. The possibility to produce nuclear fuel for the fission nuclear reactors with the hybrid reactor was analyzed too.

  6. HYCONES: a hybrid connectionist expert system.

    PubMed Central

    Leão, B. de F.; Reátegui, E. B.

    1993-01-01

    This paper describes HYCONES, a tightly-coupled Hybrid Connectionist Expert System that integrates neural networks with a symbolic approach (frames). The symbolic paradigm provides rich and flexible constructs to describe the domain knowledge, while the connectionist one provides the system with learning capabilities. The paper describes the architecture of the system, focusing on the hybrid aspects of the knowledge base and on its automatic knowledge acquisition technique from a case database. The first validation of the system is presented. At the end, a comparison with related research efforts and future developments are discussed. PMID:8130516

  7. Hybrid Current Lead Design of HTS SMES

    NASA Astrophysics Data System (ADS)

    Ge, T.; Ren, L.; He, Q.; Jiao, F.; Dong, H.; Jin, T.; Zhou, S.

    In application of Superconducting magnetic energy storage device (SMES), current lead represents a key development component. This paper will focus on parameters and structure design of hybrid high-temperature superconductor (HTS) current lead in a SMES with 100 kJ/100 kW class. Based on the theoretical analysis, finite element simulation (FEA) has been used. It studies the thermal influence of variable cross-sectional area, HTS material and the connection between current lead and cryocooler. Some improvements have been proposed to reduce heat losses. At the end of this paper, a whole procedure about hybrid current lead design is given.

  8. Hybrid fuzzy regression with trapezoidal fuzzy data

    NASA Astrophysics Data System (ADS)

    Razzaghnia, T.; Danesh, S.; Maleki, A.

    2011-12-01

    In this regard, this research deals with a method for hybrid fuzzy least-squares regression. The extension of symmetric triangular fuzzy coefficients to asymmetric trapezoidal fuzzy coefficients is considered as an effective measure for removing unnecessary fuzziness of the linear fuzzy model. First, trapezoidal fuzzy variable is applied to derive a bivariate regression model. In the following, normal equations are formulated to solve the four parts of hybrid regression coefficients. Also the model is extended to multiple regression analysis. Eventually, method is compared with Y-H.O. chang's model.

  9. Carbon nanotube core graphitic shell hybrid fibers.

    PubMed

    Hahm, Myung Gwan; Lee, Jae-Hwang; Hart, Amelia H C; Song, Sung Moo; Nam, Jaewook; Jung, Hyun Young; Hashim, Daniel Paul; Li, Bo; Narayanan, Tharangattu N; Park, Chi-Dong; Zhao, Yao; Vajtai, Robert; Kim, Yoong Ahm; Hayashi, Takuya; Ku, Bon-Cheol; Endo, Morinobu; Barrera, Enrique; Jung, Yung Joon; Thomas, Edwin L; Ajayan, Pulickel M

    2013-12-23

    A carbon nanotube yarn core graphitic shell hybrid fiber was fabricated via facile heat treatment of epoxy-based negative photoresist (SU-8) on carbon nanotube yarn. The effective encapsulation of carbon nanotube yarn in carbon fiber and a glassy carbon outer shell determines their physical properties. The higher electrical conductivity (than carbon fiber) of the carbon nanotube yarn overcomes the drawbacks of carbon fiber/glassy carbon, and the better properties (than carbon nanotubes) of the carbon fiber/glassy carbon make up for the lower thermal and mechanical properties of the carbon nanotube yarn via synergistic hybridization without any chemical doping and additional processes. PMID:24224730

  10. Italian hybrid and fission reactors scenario analysis

    NASA Astrophysics Data System (ADS)

    Ciotti, M.; Manzano, J.; Sepielli, M.

    2012-06-01

    Italy is a country where a long tradition of studies both in the fission and fusion field is consolidated; nevertheless a strong public opinion concerned with the destination of the Spent Nuclear Fuel hinders the development of nuclear power. The possibility to a severe reduction of the NSF mass generated from a fleet of nuclear reactors employing an hypothetical fusionfission hybrid reactor has been investigated in the Italian framework. The possibility to produce nuclear fuel for the fission nuclear reactors with the hybrid reactor was analyzed too.

  11. Multifunctional hybrid nanogels for theranostic applications.

    PubMed

    Sierra-Martin, B; Fernandez-Barbero, A

    2015-11-14

    This paper reviews a wide set of theranostic applications based on the special properties associated with composite nanogels. The nanogels presented here are mostly hybridized with quantum dots, magnetic nanoparticles, and plasmonic metal noble nanoparticles. These inorganic components confer nanogels multifunctional properties that extend their applications from drug delivery systems to diagnosis and therapy. Nanogels can also be surface functionalized with specific ligands to achieve targeted therapy and reduce toxicity. This versatility makes hybrid nanogels very promising agents for imaging, diagnosis and treatment of cancer and other diseases. PMID:26371991

  12. Hybrid MR-PET in Neuroimaging.

    PubMed

    Bisdas, S; Lá Fougere, C; Ernemann, U

    2015-10-01

    Hybrid magnetic resonance (MR)-positron emission tomography (MR-PET) is a novel technology with advantages over sequential MR and PET imaging, allowing maintain full individual diagnostic performance with negligible mutual interference between the two hardware settings. Obvious synergies between MR and PET in acquisition of anatomical, functional, and molecular information for neurological diseases into one single image pave the way for establishing clear clinical indications for hybrid MR-PET as well as addressing unmet neuroimaging needs in future clinics and research. Further developments in attenuation correction, quantification, workflow, and effective MR-PET data management might unfold the full potential of integrated multimodality imaging. PMID:26227618

  13. Hybrid optical and acoustic resolution optoacoustic endoscopy.

    PubMed

    He, Hailong; Wissmeyer, Georg; Ovsepian, Saak V; Buehler, Andreas; Ntziachristos, Vasilis

    2016-06-15

    We propose the implementation of hybrid optical and acoustic resolution optoacoustic endoscopy. Laser light is transmitted to tissue by two types of illumination for achieving optical and acoustic resolution imaging. A 20 MHz ultrasound detector is used for recording optoacoustic signals. The endoscopy probe attains a 3.6 mm diameter and is fully encapsulated into a catheter system. We validate the imaging performance of the hybrid endoscope on phantoms and ex vivo, and discuss the necessity for the extended resolution and depth range of endoscopy achieved. PMID:27304269

  14. Anticorrosive organic/inorganic hybrid coatings

    NASA Astrophysics Data System (ADS)

    Gao, Tongzhai

    Organic/inorganic hybrid coating system was developed for anticorrosion applications using polyurea, polyurethane or epoxide as the organic phase and polysiloxane, formed by sol-gel process, as the inorganic phase. Polyurea/polysiloxane hybrid coatings were formulated and moisture cured using HDI isocyanurate, alkoxysilane-functionalized HDI isocyanurate, and tetraethyl orthosilicate (TEOS) oligomers. Two urethanes were prepared using the same components as abovementioned in addition to the oligoesters derived from either cyclohexane diacids (CHDA) and 2-butyl-2-ethyl-1,3-propanediol (BEPD) or adipic acid (AA), isophthalic acid (IPA), 1,6-hexanediol (HD), and trimethylol propane (TMP). Accelerated weathering and outdoor exposure were performed to study the weatherability of the polyurethane/polysiloxane hybrid coating system. FTIR and solid-state 13C NMR revealed that the degradation of the hybrid coatings occurred at the urethane and ester functionalities of the organic phase. DMA and DSC analyses showed the glass transition temperature increased and broadened after weathering. SEM was employed to observe the change of morphology of the hybrid coatings and correlated with the gloss variation after weathering. Rutile TiO2 was formulated into polyurethane/polysiloxane hybrid coatings in order to investigate the effect of pigmentation on the coating properties and the sol-gel precursor. Chemical interaction between the TiO2 and the sol-gel precursor was investigated using solid-state 29Si NMR and XPS. The morphology, mechanical, viscoelastic, thermal properties of the pigmented coatings were evaluated as a function of pigmentation volume concentration (PVC). Using AFM and SEM, the pigment were observed to be well dispersed in the polymer matrix. The thermal stability, the tensile modulus and strength of the coatings were enhanced with increasing PVC, whereas the pull-off adhesion and flexibility were reduced with increasing PVC. Finally, the pigmented coatings were

  15. Electric and hybrid vehicle technologies. Quarterly report, 1 January-31 March 1998

    SciTech Connect

    1998-03-01

    This report discusses electric and hybrid vehicle technologies. Specific topics include: (1) hybrid electric bus, (2) hybrid vehicle turbogenerator, (3) emissions study, (4) electric vehicles, (5) flywheels, (6) hybrid propulsion, (7) electric generators, and (8) charging systems.

  16. A genomic approach to identify hybrid incompatibility genes

    PubMed Central

    Cooper, Jacob C.; Phadnis, Nitin

    2016-01-01

    ABSTRACT Uncovering the genetic and molecular basis of barriers to gene flow between populations is key to understanding how new species are born. Intrinsic postzygotic reproductive barriers such as hybrid sterility and hybrid inviability are caused by deleterious genetic interactions known as hybrid incompatibilities. The difficulty in identifying these hybrid incompatibility genes remains a rate-limiting step in our understanding of the molecular basis of speciation. We recently described how whole genome sequencing can be applied to identify hybrid incompatibility genes, even from genetically terminal hybrids. Using this approach, we discovered a new hybrid incompatibility gene, gfzf, between Drosophila melanogaster and Drosophila simulans, and found that it plays an essential role in cell cycle regulation. Here, we discuss the history of the hunt for incompatibility genes between these species, discuss the molecular roles of gfzf in cell cycle regulation, and explore how intragenomic conflict drives the evolution of fundamental cellular mechanisms that lead to the developmental arrest of hybrids. PMID:27230814

  17. The opportunity for hybrid rocket motors in commercial space

    NASA Astrophysics Data System (ADS)

    Estey, Paul N.; Hughes, Brian G. R.

    1992-07-01

    Hybrid rocket motors which utilize a liquid oxidizer and a solid fuel offer the potential of significantly reducing the cost of propulsion systems for space launch vehicles. Hybrid propulsion systems have a high energy efficiency, a robust combustion process and because of the separation of the propellants both physically and by phase, hybrids cannot explode. This fundamental safety feature enables the hybrid system to be fabricated and operated at costs below those of competitive solid and liquid systems. Due to the safety and low-cost nature of hybrids, they are very attractive to commercial operators. The basics of the hybrid propulsion system and its operation are discussed along with a brief history and status of hybrid motor development. Potential applications of the hybrid rocket motor for commercial space launch vehicles are presented.

  18. Plug-in hybrid electric vehicle R&D plan

    SciTech Connect

    None, None

    2007-06-01

    FCVT, in consultation with industry and other appropriate DOE offices, developed the Draft Plug-In Hybrid Electric Vehicle R&D Plan to accelerate the development and deployment of technologies critical for plug-in hybrid vehicles.

  19. Thermoresponsive Polymer and Fluorescent Dye Hybrids for Tunable Multicolor Emission.

    PubMed

    Kim, Joo-Ho; Jung, Yongseok; Lee, Dajung; Jang, Woo-Dong

    2016-05-01

    Fully reversible emission color change is achieved by blending a thermoresponsive polymer with dye hybrids. The emission color can be tuned by changing the mixing ratio of each polymer-dye hybrid. PMID:26990858

  20. Stable graphene-polyoxometalate nanomaterials for application in hybrid supercapacitors.

    PubMed

    Suárez-Guevara, Jullieth; Ruiz, Vanesa; Gómez-Romero, Pedro

    2014-10-14

    We report the synthesis of hybrid supercapacitor electrodes by a novel reduction of GO with simultaneous incorporation of polyoxometalate. These hybrids show a 30% increase in specific capacitance and excellent stability after 10,000 cycles. PMID:25164153

  1. HYBRID FAST HANKEL TRANSFORM ALGORITHM FOR ELECTROMAGNETIC MODELING

    EPA Science Inventory

    A hybrid fast Hankel transform algorithm has been developed that uses several complementary features of two existing algorithms: Anderson's digital filtering or fast Hankel transform (FHT) algorithm and Chave's quadrature and continued fraction algorithm. A hybrid FHT subprogram ...

  2. Progress in creating interspecific hybrids with Texas bluegrass (Poa arachnifera)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In addition to population based breeding within Texas bluegrass for improved forage type material, an interspecific hybrid breeding program was initiated. Interspecific hybrids involve crossing Texas bluegrass with other bluegrass (Poa) species. Texas bluegrass is dioecious (separate male and fema...

  3. Approaches to hybrid synthetic devices

    NASA Astrophysics Data System (ADS)

    Verma, Vivek

    All living creatures are made up of cells that have the ability to replicate themselves in a repetitive process called cell division. As these cells mature and divide into two there is an extensive movement of cellular components. In order to perform this essential task that sustains life, cells have evolved machines composed of proteins. Biological motors, such as kinesin, transport intracellular cargo and position organelles in eukaryotic cells via unidirectional movement on cytoskeletal tracts called microtubules. Biomolecular motor proteins have the potential to be used as 'nano-engines' for switchable devices, directed self assembly, controlled bioseparations and powering nano- and microelectromechanical systems. However, engineering such systems requires fabrication processes that are compatible with biological materials such as kinesin motor proteins and microtubules. The first objective of the research was to establish biocompatibility between protein systems and nanofabrication. The second objective was to use current micro- and nanofabrication techniques for patterning proteins at specific locations and to study role of casein in supporting the operation of surface bound kinesin. The third objective was to link kinesin and microtubule system to cellulose nanowhiskers. The effects of micro- and nanofabrication processing chemicals and resists on the functionality of casein, kinesin, and microtubule proteins are systematically examined to address the important missing link of the biocompatibility of micro- and nanofabrication processes needed to realize hybrid system fabrication. It was found that both casein, which is used to prevent motor denaturation on surfaces, and kinesin motors are surprisingly tolerant of most of the processing chemicals examined. Microtubules, however, are much more sensitive. Exposure to the processing chemicals leads to depolymerization, which is partially attributed to the pH of the solutions examined. When the chemicals were

  4. Hybrid Propulsion Testing at Marshall Space Flight Center

    NASA Technical Reports Server (NTRS)

    Prince, Andrew S.; Cash, Stephon F. (Technical Monitor)

    2002-01-01

    Hybrid propulsion testing involving eleven and twenty-four inch motors performed at the Marshall Space Flight Center (MSFC) from the early 1990's to the present are discussed. Topics covered include: Solid Propulsion Investigation Program, Joint NASA Industry Research and Development (JIRAD) program, Large Subscale Solid Rocket Combustion Simulator (LSSRCS), Hybrid Propulsion Demonstration Program (HPDP), Hybrid Propulsion for Launch Vehicle Booster (HPTLV), Peroxide Hybrid Upper Stage (PHUS) and Solid Fuel Torch (SFT).

  5. DNA/DNA in situ hybridization with enzyme linked probes

    SciTech Connect

    Grillo, S.; Mosher, M.; Charles, P.; Henry, S.; Taub, F.

    1987-05-01

    A non-radioactive in situ nucleic acid hybridization method which requires no antibodies, haptens, avidin or biotin intermediateries is presented. Horseradish peroxidase (HRP) labeled nucleic acid probes are hybridized in situ for 2 hours or less, followed by brief washing of hybridized cells and the direct detection of in situ hybrids with diaminobenzidine (DAB). Application of this method to the detection of Human Papilloma Virus (HPV) in human cells is shown.

  6. Zebrafish Whole-Mount In Situ Hybridization Followed by Sectioning.

    PubMed

    Doganli, Canan; Nyengaard, Jens Randel; Lykke-Hartmann, Karin

    2016-01-01

    In situ hybridization is a powerful technique used for locating specific nucleic acid targets within morphologically preserved tissues and cell preparations. A labeled RNA or DNA probe hybridizes to its complementary mRNA or DNA sequence within a sample. Here, we describe RNA in situ hybridization protocol for whole-mount zebrafish embryos. PMID:26695046

  7. Hybrid and Plug-In Electric Vehicles (Brochure)

    SciTech Connect

    Not Available

    2014-05-01

    Hybrid and plug-in electric vehicles use electricity as their primary fuel or to improve the efficiency of conventional vehicle designs. These vehicles can be divided into three categories: hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEVs), all-electric vehicles (EVs). Together, they have great potential to cut U.S. petroleum use and vehicle emissions.

  8. Reactions of Sweet Corn Hybrids to Prevalent Diseases and Herbicides

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This 27-year summary is of University of Illinois sweet corn nurseries from 1984 to 2010, and includes the reactions of 800 hybrids to eight diseases and three herbicides. Commercially-available and pre-commercial hybrids included 547 shrunken-2 hybrids (317 yellow, 152 bi-color, and 78 white), 117 ...

  9. 47 CFR 73.404 - Interim hybrid IBOC DAB operation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... RADIO BROADCAST SERVICES Digital Audio Broadcasting § 73.404 Interim hybrid IBOC DAB operation. (a) The... test operation pursuant to § 73.1620, may commence interim hybrid IBOC DAB operation with digital... No. 99-325. FM stations are permitted to operate with hybrid digital effective radiated power...

  10. 47 CFR 73.404 - Interim hybrid IBOC DAB operation.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... RADIO BROADCAST SERVICES Digital Audio Broadcasting § 73.404 Interim hybrid IBOC DAB operation. (a) The... test operation pursuant to § 73.1620, may commence interim hybrid IBOC DAB operation with digital... No. 99-325. FM stations are permitted to operate with hybrid digital effective radiated power...

  11. Tamarix (Tamaricaceae) hybrids: most dominant invasive genotype in southern Africa

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Hybridization can potentially enhance invasiveness. Tamarix (Tamaricaceae) hybrids appear to be the dominant genotypes in their invasions. Exotic Tamarix are declared invasive in South Africa and the exotic T. chinensis and T. ramosissima are known to hybridize between themselves, and with the nativ...

  12. Individual Factors and Successful Learning in a Hybrid Course

    ERIC Educational Resources Information Center

    Arispe, Kelly; Blake, Robert J.

    2012-01-01

    What personality factors make for a successful hybrid L2 learning experience? While previous studies have examined online learning in comparative terms (i.e. Which format is better: in class or hybrid?), this study examines certain personality and cognitive factors that might define the ideal hybrid language learner. All informants studied…

  13. 47 CFR 73.404 - Interim hybrid IBOC DAB operation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Interim hybrid IBOC DAB operation. 73.404... RADIO BROADCAST SERVICES Digital Audio Broadcasting § 73.404 Interim hybrid IBOC DAB operation. (a) The... test operation pursuant to § 73.1620, may commence interim hybrid IBOC DAB operation with...

  14. 7 CFR 201.78 - Pollen control for hybrids.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Pollen control for hybrids. 201.78 Section 201.78... control for hybrids. (a) Wheat and barley. Shedders in the seed parent, at any one inspection, are limited... Line is a cytoplasmic male sterile female line used to produce hybrid seed. An R Line is a...

  15. The Underutilized Potential of the Hybrid Educator in Teacher Education

    ERIC Educational Resources Information Center

    Jennings, Gregory; Peloso, Jeanne M.

    2010-01-01

    The hybrid educator is an essential contributor to the development of new public school teachers. A hybrid educator is a college adjunct professor employed full time by a public school system. The role of the hybrid educator involves the navigation of two separate systems in developing new teachers: the university and the public school. This…

  16. 7 CFR 1400.212 - Growers of hybrid seed.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Growers of hybrid seed. 1400.212 Section 1400.212... AND SUBSEQUENT CROP, PROGRAM, OR FISCAL YEARS Payment Eligibility § 1400.212 Growers of hybrid seed. The existence of a hybrid seed contract for a person or legal entity will not be taken into...

  17. Multiple insect resistance in 70 commercial corn hybrids - 2013

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Commercial corn hybrids were screened for ear- and kernel-feeding insect resistance under the field conditions at Tifton, GA. Nineteen hybrids were rated as very good (VG), the highest rating for multiple insect resistance in 2013. Five hybrids were developed utilizing YHR or BHR traits (also known ...

  18. 7 CFR 1400.212 - Growers of hybrid seed.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 10 2011-01-01 2011-01-01 false Growers of hybrid seed. 1400.212 Section 1400.212... AND SUBSEQUENT CROP, PROGRAM, OR FISCAL YEARS Payment Eligibility § 1400.212 Growers of hybrid seed. The existence of a hybrid seed contract for a person or legal entity will not be taken into...

  19. Effectiveness of molecular techniques in identification of Erianthus hybrids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    It has been a challenge for sugarcane breeders to identify hybrid progeny from wild crosses involving wild relatives including Erianthus due to the tendency of sugarcane cultivars (Saccharum spp. hybrids) to self-pollinate during crossing. Selection of hybrid progeny on the basis of morphological tr...

  20. Cannibalism in single-batch hybrid catfish production ponds

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Hybrid catfish are more efficiently harvested by seining than are Channel Catfish. Due to that, and their faster growth, hybrids are typically produced in “single-batch” production systems, either in intensively-aerated commercial ponds or in split-pond systems. In either production system, hybrids...

  1. Confirmation of hybrid origin in Arisaema (Araceae) using molecular markers

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A population of hybrids between Arisaema triphyllum subsp. stewardsonii and A. dracontium was investigated using molecular markers to document the hybrid origin. Total genomic DNA was extracted from A. triphyllum, A. dracontium, and the hybrids, and subjected to sequence analysis of various regions...

  2. Evaluation of insect resistance among 47 commercial corn hybrids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In 2008, 65 commercial hybrids were examined for insect resistance at Tifton, Georgia. Fifteen of the 65 hybrids were new hybrids developed using new technology (named YieldGard VecTran Triple, abbreviated as VT or VT3), which allows the stack of multiple traits for stalk protection, root protection...

  3. Reef fish hybridization: lessons learnt from butterflyfishes (genus Chaetodon)

    PubMed Central

    Montanari, Stefano R; van Herwerden, Lynne; Pratchett, Morgan S; Hobbs, Jean-Paul A; Fugedi, Anneli

    2012-01-01

    Natural hybridization is widespread among coral reef fishes. However, the ecological promoters and evolutionary consequences of reef fish hybridization have not been thoroughly evaluated. Butterflyfishes form a high number of hybrids and represent an appropriate group to investigate hybridization in reef fishes. This study provides a rare test of terrestrially derived hybridization theory in the marine environment by examining hybridization between Chaetodon trifasciatus and C. lunulatus at Christmas Island. Overlapping spatial and dietary ecologies enable heterospecific encounters. Nonassortative mating and local rarity of both parent species appear to permit heterospecific breeding pair formation. Microsatellite loci and mtDNA confirmed the status of hybrids, which displayed the lowest genetic diversity in the sample and used a reduced suite of resources, suggesting decreased adaptability. Maternal contribution to hybridization was unidirectional, and no introgression was detected, suggesting limited, localized evolutionary consequences of hybridization. Comparisons to other reef fish hybridization studies revealed that different evolutionary consequences emerge, despite being promoted by similar factors, possibly due to the magnitude of genetic distance between hybridizing species. This study highlights the need for further enquiry aimed at evaluating the importance and long-term consequences of reef fish hybridization. PMID:22423326

  4. Hybrids for heavy-lift propulsion - Unsolved problems

    NASA Technical Reports Server (NTRS)

    Ramohalli, Kumar; Yi, Jianwen; Wygle, Brian

    1992-01-01

    The basic unsolved problems of hybrid rockets are examined with the aim of facilitating solutions which could enable the attainment of the full potentials of the hybrid as a heavy-lift propulsion system. The advantages of safety, cost-effectiveness, stop-restart capability, and simplicity of the manufacturing process are reviewed. Attention is given to a comprehensive turbulent hybrid rocket combustion model.

  5. 7 CFR 1400.212 - Growers of hybrid seed.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 10 2012-01-01 2012-01-01 false Growers of hybrid seed. 1400.212 Section 1400.212... AND SUBSEQUENT CROP, PROGRAM, OR FISCAL YEARS Payment Eligibility § 1400.212 Growers of hybrid seed. The existence of a hybrid seed contract for a person or legal entity will not be taken into...

  6. 7 CFR 1400.212 - Growers of hybrid seed.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 10 2014-01-01 2014-01-01 false Growers of hybrid seed. 1400.212 Section 1400.212... AND SUBSEQUENT CROP, PROGRAM, OR FISCAL YEARS Payment Eligibility § 1400.212 Growers of hybrid seed. The existence of a hybrid seed contract for a person or legal entity will not be taken into...

  7. 7 CFR 1400.212 - Growers of hybrid seed.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 10 2013-01-01 2013-01-01 false Growers of hybrid seed. 1400.212 Section 1400.212... AND SUBSEQUENT CROP, PROGRAM, OR FISCAL YEARS Payment Eligibility § 1400.212 Growers of hybrid seed. The existence of a hybrid seed contract for a person or legal entity will not be taken into...

  8. Hybrid surgery for dural arteriovenous fistula in the neurosurgical hybrid operating suite

    PubMed Central

    Shen, Shih-Chieh; Tsuei, Yuang-Seng; Chen, Wen-Hsien; Shen, Chiung-Chyi

    2014-01-01

    Treatment of a dural arteriovenous fistula (AVF), which is difficult to access by either the surgical or endovascular approach, is challenging. A hybrid technique, combining a microsurgical approach and endovascular embolization, can provide less invasive management of dural AVFs in a modern neurosurgical hybrid operating suite. We present a case of intracerebral hemorrhage in the left cerebellum secondary to dural AVF, Cognard type IV with numerous tiny feeders from the ascending pharyngeal artery branches. No adequate arterial or venous route for endovascular embolization was found by neuroangiography. The hybrid technique, combining keyhole pterional craniotomy and embolization with n-butyl cyanoacrylate glue injection via direct cannulation of the periclival venous plexus, succeeded in obliterating the dural AVF. Intraoperative angiography showed successful embolization of the dural AVF without any complication. This report illustrates the usefulness of the neurosurgical hybrid operating suite for the treatment of difficult dural AVFs. PMID:24459222

  9. Chain ordering of hybrid lipids can stabilize domains in saturated/hybrid/cholesterol lipid membranes

    NASA Astrophysics Data System (ADS)

    Yamamoto, T.; Brewster, R.; Safran, S. A.

    2010-07-01

    We use a liquid-crystal model to predict that hybrid lipids (lipids that have one saturated and one unsaturated tail) can stabilize line interfaces between domains in mixed membranes of saturated lipids, hybrid lipids, and cholesterol (SHC membranes). The model predicts the phase separation of SHC membranes with both parabolic and loop binodals depending on the cholesterol concentration, modeled via an effective pressure. In some cases, the hybrid lipids can reduce the line tension to zero in SHC membranes at temperatures that approach the critical temperature as the pressure is increased. The differences in the hybrid saturated tail conformational order in bulk and at the interface are responsible for the reduction of the line tension.

  10. Battery control system for hybrid vehicle and method for controlling a hybrid vehicle battery

    DOEpatents

    Bockelmann, Thomas R.; Hope, Mark E.; Zou, Zhanjiang; Kang, Xiaosong

    2009-02-10

    A battery control system for hybrid vehicle includes a hybrid powertrain battery, a vehicle accessory battery, and a prime mover driven generator adapted to charge the vehicle accessory battery. A detecting arrangement is configured to monitor the vehicle accessory battery's state of charge. A controller is configured to activate the prime mover to drive the generator and recharge the vehicle accessory battery in response to the vehicle accessory battery's state of charge falling below a first predetermined level, or transfer electrical power from the hybrid powertrain battery to the vehicle accessory battery in response to the vehicle accessory battery's state of charge falling below a second predetermined level. The invention further includes a method for controlling a hybrid vehicle powertrain system.

  11. Hybrid Molten Salt Reactor (HMSR) System Study

    SciTech Connect

    Woolley, Robert D; Miller, Laurence F

    2014-04-01

    Can the hybrid system combination of (1) a critical fission Molten Salt Reactor (MSR) having a thermal spectrum and a high Conversion Ratio (CR) with (2) an external source of high energy neutrons provide an attractive solution to the world's expanding demand for energy? The present study indicates the answer is an emphatic yes.

  12. Entanglement in Quantum-Classical Hybrid

    NASA Technical Reports Server (NTRS)

    Zak, Michail

    2011-01-01

    It is noted that the phenomenon of entanglement is not a prerogative of quantum systems, but also occurs in other, non-classical systems such as quantum-classical hybrids, and covers the concept of entanglement as a special type of global constraint imposed upon a broad class of dynamical systems. Application of hybrid systems for physics of life, as well as for quantum-inspired computing, has been outlined. In representing the Schroedinger equation in the Madelung form, there is feedback from the Liouville equation to the Hamilton-Jacobi equation in the form of the quantum potential. Preserving the same topology, the innovators replaced the quantum potential with other types of feedback, and investigated the property of these hybrid systems. A function of probability density has been introduced. Non-locality associated with a global geometrical constraint that leads to an entanglement effect was demonstrated. Despite such a quantum like characteristic, the hybrid can be of classical scale and all the measurements can be performed classically. This new emergence of entanglement sheds light on the concept of non-locality in physics.

  13. Quarkonium hybrids with nonrelativistic effective field theories

    NASA Astrophysics Data System (ADS)

    Berwein, Matthias; Brambilla, Nora; Tarrús Castellà, Jaume; Vairo, Antonio

    2015-12-01

    We construct a nonrelativistic effective field theory description of heavy quarkonium hybrids from QCD. We identify the symmetries of the system made of a heavy quark, a heavy antiquark, and glue in the static limit. Corrections to this limit can be obtained order by order in an expansion in the inverse of the mass m of the heavy quark. At order 1 /m in the expansion, we obtain, at the level of potential nonrelativistic QCD, a system of coupled Schrödinger equations that describes hybrid spin-symmetry multiplets, including the mixing of different static energies into the hybrid states, an effect known as Λ doubling in molecular physics. In the short distance, the static potentials depend on two nonperturbative parameters, the gluelump mass and the quadratic slope, which can be determined from lattice calculations. We adopt a renormalon subtraction scheme for the calculation of the perturbative part of the potential. We numerically solve the coupled Schrödinger equations and obtain the masses for the lowest lying spin-symmetry multiplets for c c ¯, b c ¯, and b b ¯ hybrids. The Λ -doubling effect breaks the degeneracy between opposite-parity spin-symmetry multiplets and lowers the mass of the multiplets that get mixed contributions of different static energies. We compare our findings to the experimental data, direct lattice computations, and sum rule calculations, and discuss the relation to the Born-Oppenheimer approximation.

  14. High-Temperature, Bellows Hybrid Seal

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M. (Inventor); Sirocky, Paul J. (Inventor)

    1994-01-01

    A high-temperature hybrid seal is constructed of multiple elements to meet the many demands placed on the seal. The primary elements are: a central high-temperature bellows, a braided ceramic sheath covering the bellows, an outer abrasion resistant sheath covering the ceramic sheath, and a structurally-sound seal-end termination.

  15. Analysis of village hybrid systems in Chile

    SciTech Connect

    Lew, D J; Corbus, D; Holz, R

    1996-06-01

    Chile recently began a major rural electrification program to electrify those 240,000 families (about half of the rural people) who lack electricity access. In this paper, we discuss a pilot project to electrify three remote villages in Chile`s Region IX using wind/genset/battery hybrids. The intent of this project is to demonstrate the reliability and cost-effectiveness of wind/genset/battery hybrids and to encourage replication of these types of systems in Chile`s electrification program. For each village, electricity connections are planned for several residences, and also schools, health posts, community centers, or chapels. Projected average daily loads are small, ranging from 4 to 10 kWh. Using the optimization program HOMER and the simulation program Hybrid2, we evaluated options to maximize technical performance, minimize costs, and gain experience with a variety of systems and components. We find that wind/genset/battery hybrids will be able to provide cost-effective, reliable power for these sites. More importantly, their inherent flexibility allows for variations in load and resource without greatly affecting the cost of energy.

  16. Plastic-Sealed Hybrid Power Circuit Package

    NASA Technical Reports Server (NTRS)

    Miller, W. N.; Gray, O. E.

    1983-01-01

    Proposed design for hybrid high-voltage power-circuit package uses molded plastic for hermetic sealing instead of glass-to-metal seal. New package used to house high-voltage regulators and solid-state switches for applications in aircraft, electric automobiles, industrial equipment, satellites, solarcell arrays, and other equipment in extreme environments.

  17. 4 Keys to a Better Hybrid

    ERIC Educational Resources Information Center

    Schaffhauser, Dian

    2012-01-01

    Blended learning has become a meme. While mixing online instruction with face-to-face time is not exactly new, momentum for hybrid learning has been building ever since a Department of Education meta-study in 2010 quietly announced that traditional education simply does not stack up. In that study, online education was determined to be more…

  18. Charmonium meson and hybrid radiative transitions

    SciTech Connect

    Guo, Peng; Yépez-Martínez, Tochtli; Szczepaniak, Adam P.

    2014-06-01

    We consider the non-relativistic limit of the QCD Hamiltonian in the Coulomb gauge, to describe radiative transitions between conventional charmonium states and from the lowest multiplet of cc¯ hybrids to charmonium mesons. The results are compared to potential quark models and lattices calculations.

  19. Hybrid quantum teleportation: A theoretical model

    SciTech Connect

    Takeda, Shuntaro; Mizuta, Takahiro; Fuwa, Maria; Yoshikawa, Jun-ichi; Yonezawa, Hidehiro; Furusawa, Akira

    2014-12-04

    Hybrid quantum teleportation – continuous-variable teleportation of qubits – is a promising approach for deterministically teleporting photonic qubits. We propose how to implement it with current technology. Our theoretical model shows that faithful qubit transfer can be achieved for this teleportation by choosing an optimal gain for the teleporter’s classical channel.

  20. Hybrid Laser Would Combine Power With Efficiency

    NASA Technical Reports Server (NTRS)

    Sipes, Donald L., Jr

    1986-01-01

    Efficient laser system constructed by using two semiconductor lasers to pump neodymium yttrium aluminum garnet (Nd:YAG) device. Hybrid concept allows digital transmission at data rates of several megabits per second with reasonably sized optical aperture of 20 cm. Beams from two GaAs lasers efficiently coupled for pumping Nd:YAG crystal. Combination of lasers exploits best features of each.