Science.gov

Sample records for lightweight trauma module

  1. Lightweight Trauma Module - LTM

    NASA Technical Reports Server (NTRS)

    Hatfield, Thomas

    2008-01-01

    Current patient movement items (PMI) supporting the military's Critical Care Air Transport Team (CCATT) mission as well as the Crew Health Care System for space (CHeCS) have significant limitations: size, weight, battery duration, and dated clinical technology. The LTM is a small, 20 lb., system integrating diagnostic and therapeutic clinical capabilities along with onboard data management, communication services and automated care algorithms to meet new Aeromedical Evacuation requirements. The Lightweight Trauma Module is an Impact Instrumentation, Inc. project with strong Industry, DoD, NASA, and Academia partnerships aimed at developing the next generation of smart and rugged critical care tools for hazardous environments ranging from the battlefield to space exploration. The LTM is a combination ventilator/critical care monitor/therapeutic system with integrated automatic control systems. Additional capabilities are provided with small external modules.

  2. Lightweight flexible rooftop PV module

    SciTech Connect

    Izu, M.; Ovshinsky, H.C.; Whelan, K.

    1994-12-31

    Energy Conversion Devices, Inc. (ECD) and United Solar Systems Corp. (United Solar) are developing lightweight, flexible photovoltaic modules that can replace conventional roofing materials and be economically and aesthetically integrated into residential and commercial buildings. The modules will be fabricated from high-efficiency multi-junction a-Si alloy solar cells developed by ECD and United Solar. These cells are produced on thin, flexible, stainless steel substrates. Two types of products 1 ft by 10 ft overlapping PV shingles and 1.3 ft by 20 ft PV roof panels are being developed by United Solar and ECD, respectively. United Solar`s shingle type design uses a roof mounting procedures similar to those used with conventional asphalt shingles, while ECD`s PV panel uses mounting procedures conforming to metal roof systems. Thus, they can be installed on roof sheathings, replacing ordinary shingles or metal roofing panels, on a standard wood roof construction.

  3. Lightweight photovoltaic module development for unmanned aerial vehicles

    SciTech Connect

    Nowlan, M.J.; Maglitta, J.C.; Lamp, T.R.

    1998-07-01

    Lightweight photovoltaic modules are being developed for powering high altitude unmanned aerial vehicles (UAVs). Terrestrial crystalline silicon solar cell and module technologies are being applied to minimize module cost, with modifications to improve module specific power (W/kg) and power density (W/m{sup 2}). New module processes are being developed for assembling standard thickness (320 mm) and thin (125 mm) solar cells, thin (50 to 100 mm) encapsulant films, and thin (25 mm) cover films. In comparison, typical terrestrial modules use 300 to 400 mm thick solar cells, 460 mm thick encapsulants, and 3.2 mm thick glass covers. The use of thin, lightweight materials allows the fabrication of modules with specific powers ranging from 120 to 200 W/kg, depending on cell thickness and efficiency, compared to 15 W/kg or less for conventional terrestrial modules. High efficiency designs based on ultra-thin (5 mm) GaAs cells have also been developed, with the potential for achieving substantially higher specific powers. Initial design, development, and module assembly work is completed. Prototype modules were fabricated in sizes up to 45 cm x 99 cm. Module materials and processes are being evaluated through accelerated environmental testing, including thermal cycling, humidity-freeze cycling, mechanical cycling, and exposure to UV and visible light.

  4. Lightweight diaphragm mirror module system for solar collectors

    DOEpatents

    Butler, B.L.

    1984-01-01

    A mirror module system is provided for accurately focusing solar radiation on a point or a line as defined by an array of solar collectors. Each mirror module includes a flexible membrane stretched over a frame in a manner similar to that of a drum or a trampoline and further includes a silvered glass or plastic mirror for forming an optical reflecting surface. The configuration of the optical reflecting surface is variably adjustable to provide for the accurate focusing of the solar energy on a given collector array, e.g., a point or a linear array arrangement. The flexible mirror-membrane combination is lightweight to facilitate installation and reduce system cost yet structurally strong enough to provide for the precise focusing of the incident solar radiation in a semi-rigid reflector system in which unwanted reflector displacement is minimized.

  5. Lightweight diaphragm mirror module system for solar collectors

    DOEpatents

    Butler, Barry L.

    1985-01-01

    A mirror module system is provided for accurately focusing solar radiation on a point or a line as defined by an array of solar collectors. Each mirror module includes a flexible membrane stretched over a frame in a manner similar to that of a drum or a trampoline and further includes a silvered glass or plastic mirror for forming an optical reflecting surface. The configuration of the optical reflecting surface is variably adjustable to provide for the accurate focusing of the solar energy on a given collector array, e.g., a point or a linear array arrangement. The flexible mirror-membrane combination is lightweight to facilitate installation and reduce system cost yet structurally strong enough to provide for the precise focusing of the incident solar radiation in a semi-rigid reflector system in which unwanted reflector displacement is minimized.

  6. A preclinical dental trauma teaching module.

    PubMed

    Marriot-Smith, Charlotte; Marino, Victor; Heithersay, Geoffrey Sinclair

    2016-06-01

    A dental trauma exercise using the anterior segment of a sheep mandible as a model has been incorporated into the undergraduate dental programme at the University of Adelaide since 2011. Students are required to replant a simulated tooth avulsion, reposition a laterally luxated tooth injury and then apply a flexible splint consisting of 40 lb fishing nylon attached with a resin-modified glass ionomer cement, GC Fuji Ortho LC. The exercise concludes with the simple removal of the splint with a spoon excavator. The acrylic mounted formalin-fixed sheep mandible is reusable, which has obvious economic and practical advantages. PMID:26667108

  7. US Coast Guard lightweight fire-fighting module

    NASA Technical Reports Server (NTRS)

    1980-01-01

    The U.S. Coast Guard Fire-fighting Module developed for the purpose of fighting fires in harbors and on ships is described. The module can be lifted by a dockside crane or helicopter and placed on the deck of a patrol boat or cutter for transportation to the scene of the fire. At the fire the module can be set up and put in operation by a crew of two in approximately fifteen minutes. Once in operation the module will deliver water to two fire nozzles at a pressure of 150 psi and a flow rate of 2000 gpm. Sufficient fuel is carried in the module for three hours of continuous operation. A record of the development of the fire fighting module is also presented.

  8. US Coast Guard lightweight fire-fighting module

    NASA Astrophysics Data System (ADS)

    1980-05-01

    The U.S. Coast Guard Fire-fighting Module developed for the purpose of fighting fires in harbors and on ships is described. The module can be lifted by a dockside crane or helicopter and placed on the deck of a patrol boat or cutter for transportation to the scene of the fire. At the fire the module can be set up and put in operation by a crew of two in approximately fifteen minutes. Once in operation the module will deliver water to two fire nozzles at a pressure of 150 psi and a flow rate of 2000 gpm. Sufficient fuel is carried in the module for three hours of continuous operation. A record of the development of the fire fighting module is also presented.

  9. Design, Construction, and Testing of Lightweight X-ray Mirror Modules

    NASA Technical Reports Server (NTRS)

    McClelland, Ryan S.; Biskach, Michael P.; Chan, Kai-Wing; Espina, Rebecca A.; Hohl, Bruce R.; Matson, Elizabeth A.; Saha, Timo C.; Zhang, William W.

    2013-01-01

    Lightweight and high resolution optics are needed for future space-based X-ray telescopes to achieve advances in high-energy astrophysics. The Next Generation X-ray Optics (NGXO) team at NASA GSFC is nearing mission readiness for a 10 arc-second Half Power Diameter (HPD) slumped glass mirror technology while laying the groundwork for a future 1-2 arc-second technology based on polished silicon mirrors. Technology Development Modules (TDMs) have been designed, fabricated, integrated with mirrors segments, and extensively tested to demonstrate technology readiness. Tests include X-ray performance, thermal vacuum, acoustic load, and random vibration. The thermal vacuum and acoustic load environments have proven relatively benign, while the random vibration environment has proven challenging due to large input amplification at frequencies above 500 Hz. Epoxy selection, surface preparation, and larger bond area have increased bond strength while vibration isolation has decreased vibration amplification allowing for space launch requirements to be met in the near term. The next generation of TDMs, which demonstrates a lightweight structure supporting more mirror segments, is currently being fabricated. Analysis predicts superior performance characteristics due to the use of E-60 Beryllium-Oxide Metal Matrix Composite material, with only a modest cost increase. These TDMs will be larger, lighter, stiffer, and stronger than the current generation. Preliminary steps are being taken to enable mounting and testing of 1-2 arc-second mirror segments expected to be available in the future. A Vertical X-ray Test Facility (VXTF) will minimize module gravity distortion and allow for less constrained mirror mounts, such as fully kinematic mounts. Permanent kinematic mounting into a modified TDM has been demonstrated to achieve 2 arc-second level distortion free alignment.

  10. Trauma.

    PubMed

    Huisman, Thierry A G M; Poretti, Andrea

    2016-01-01

    Traumatic brain and spine injury (TBI/TSI) is a leading cause of death and lifelong disability in children. The biomechanical properties of the child's brain, skull, and spine, the size of the child, the age-specific activity pattern, and variance in trauma mechanisms result in a wide range of age-specific traumas and patterns of brain and spine injuries. A detailed knowledge about the various types of primary and secondary pediatric head and spine injuries is essential to better identify and understand pediatric TBI/TSI, which enhances sensitivity and specificity of diagnosis, will guide therapy, and may give important information about the prognosis. The purposes of this chapter are to: (1) discuss the unique epidemiology, mechanisms, and characteristics of TBI/TSI in children; (2) review the anatomic and functional imaging techniques that can be used to study common and rare pediatric TBI/TSI and their complications; (3) comprehensively review frequent primary and secondary brain injuries; and (4) to give a short overview of two special types of pediatric TBI/TSI: birth-related and nonaccidental injuries. PMID:27430465

  11. Synaptic strength modulation after cortical trauma: a role in epileptogenesis.

    PubMed

    Avramescu, Sinziana; Timofeev, Igor

    2008-07-01

    Traumatic brain injuries are often followed by abnormal hyperexcitability, leading to acute seizures and epilepsy. Previous studies documented the rewiring capacity of neocortical neurons in response to various cortical and subcortical lesions. However, little information is available on the functional consequences of these anatomical changes after cortical trauma and the adaptation of synaptic connectivity to a decreased input produced by chronic deafferentation. In this study, we recorded intracellular (IC) activities of cortical neurons simultaneously with extracellular (EC) unit activities and field potentials of neighboring cells in cat cortex, after a large transection of the white matter underneath the suprasylvian gyrus, in acute and chronic conditions (at 2, 4, and 6 weeks) in ketamine-xylazine-anesthetized cats. Using EC spikes to compute the spike-triggered averages of IC membrane potential, we found an increased connection probability and efficacy between cortical neurons weeks after cortical trauma. Inhibitory interactions showed no significant changes in the traumatized cortex compared with control. The increased synaptic efficacy was accompanied by enhanced input resistance and intrinsic excitability of cortical neurons, as well as by increased duration of silent network periods. Our electrophysiological data revealed functional consequences of previously reported anatomical changes in the injured cortex. We suggest that homeostatic synaptic plasticity compensating the decreased activity in the undercut cortex leads to an uncontrollable cortical hyperexcitability and seizure generation. PMID:18596152

  12. Nephrilin peptide modulates a neuroimmune stress response in rodent models of burn trauma and sepsis

    PubMed Central

    Mascarenhas, Desmond D; ElAyadi, Amina; Singh, Baljit K; Prasai, Anesh; Hegde, Sachin D; Herndon, David N; Finnerty, Celeste C

    2013-01-01

    Sepsis occurs three times more often in burns than in other types of trauma, suggesting an overlap or synergy between underlying immune mechanisms in burn trauma and sepsis. Nephrilin peptide, a designed inhibitor of mTORC2, has previously been shown to modulate a neuroimmune stress response in rodent models of xenobiotic and metabolic stress. Here we investigate the effect of nephrilin peptide administration in different rodent models of burn trauma and sepsis. In a rat scald burn model, daily subcutaneous bolus injection of 4 mg/kg nephrilin significantly reduced the elevation of kidney tissue substance P, S100A9 gene expression, PMN infiltration and plasma inflammatory markers in the acute phase, while suppressing plasma CCL2 and insulin C-peptide, kidney p66shc-S36 phosphorylation and PKC-beta and CGRP in dorsal root ganglia at 14 days (chronic phase). In the mouse cecal ligation and puncture model of sepsis, nephrilin fully protected mice from mortality between surgery and day 7, compared to 67% mortality in saline-treated animals, while significantly reducing elevated CCL2 in plasma. mTORC2 may modulate important neuroimmune responses in both burn trauma and sepsis. PMID:24273694

  13. Pharmacological Modulation of Acute Trauma Memories to Prevent PTSD: Considerations from a Developmental Perspective

    PubMed Central

    Hruska, Bryce; Cullen, Patrick K.; Delahanty, Douglas L.

    2014-01-01

    Estimates of the lifetime prevalence of posttraumatic stress disorder (PTSD) in American adults range from 6.4–6.8%. PTSD is associated with increased risk for comorbid major depression, substance use disorder, suicide, and a variety of other mental and physical health conditions. Given the negative sequelae of trauma/PTSD, research has focused on identifying efficacious interventions that could be administered soon after a traumatic event to prevent or reduce the subsequent incidence of PTSD. While early psychosocial interventions have been shown to be relatively ineffective, early (secondary) pharmacological interventions have shown promise. These pharmacological approaches are largely based on the hypothesis that disruption of altered stress hormone levels and the consequent formation of trauma memories could protect against the development of PTSD. The present manuscript reviews the literature regarding the role of peri-traumatic stress hormones as risk factors for the development of PTSD and reviews evidence for the efficacy of exogenously modulating stress hormone levels to prevent/buffer the development of PTSD symptoms. Whereas prior literature has focused primarily on either child or adult studies, the present review incorporates both child and adult studies in a developmental approach to understanding risk for PTSD and how pharmacological modulation of acute memories may buffer the development of PTSD symptoms. PMID:24513176

  14. Childhood Exposure to Psychological Trauma and the Risk of Suicide Attempts: The Modulating Effect of Psychiatric Disorders

    PubMed Central

    Park, Subin; Hong, Jin Pyo; Jeon, Hong Jin; Seong, Sujeong

    2015-01-01

    Objective We examined whether childhood exposure to psychological trauma is associated with greater suicidality and whether specific psychiatric disorders modulate this association in a representative sample of Korean adults. Methods The Korean version of the Composite International Diagnostic Interview 2.1 was administered to 6,027 subjects aged 18-74 years. Subjects who experienced a traumatic event before the age of 18 years, the childhood-trauma-exposure group, were compared with controls without childhood trauma exposure. Results Childhood exposure to psychological trauma was associated with lifetime suicidal ideation (OR=3.19, 95% CI=2.42-4.20), suicide plans (OR=4.15, 95% CI=2.68-6.43), and suicide attempts (OR=4.52, 95% CI=2.97-6.88). These associations weakened after further adjustment for any psychiatric disorders, but they were not eliminated. The risk of suicide attempts related to childhood trauma increased with the presence of a concurrent alcohol use, depressive, or eating disorder. Conclusion In terms of clinical implications, patients with these disorders who have a history of childhood trauma should be carefully assessed for their suicide risk and aggressively treated for psychiatric disorders. PMID:25866516

  15. Lightweight PV Inverters: Dual Bi-Directional IGBTs Modules Enables Breakthrough PV Inverter Using Current Modulation Topology

    SciTech Connect

    2012-01-30

    Solar ADEPT Project: PV inverters convert DC power generated by modules into usable AC power. IPC’s initial 30kW 94lb. PV inverter reduces the weight of comparable 30kW PV inverters by 90%—reducing the cost of materials, manufacturing, shipping, and installation. With ARPA-E support, new bi-directional silicon power switches will be developed, commercialized, and utilized in IPC’s next-generation PV inverter. With these components, IPC will produce 100kW inverters that weight less than 100lb., reducing the weight of conventional 3,000lb. 100kW inverters by more than 95%. The new power switches will cut IPC’s $/W manufacturing cost in half, as well as further reduce indirect shipping and installation costs.

  16. Lightweight Shield Against Space Debris

    NASA Technical Reports Server (NTRS)

    Redmon, John W., Jr.; Lawson, Bobby E.; Miller, Andre E.; Cobb, W. E.

    1992-01-01

    Report presents concept for lightweight, deployable shield protecting orbiting spacecraft against meteoroids and debris, and functions as barrier to conductive and radiative losses of heat. Shield made in four segments providing 360 degree coverage of cylindrical space-station module.

  17. Stress, trauma and PTSD: translational insights into the core synaptic circuitry and its modulation.

    PubMed

    Bennett, Maxwell R; Hatton, Sean N; Lagopoulos, Jim

    2016-06-01

    Evidence is considered as to whether behavioral criteria for diagnosis of post-traumatic stress disorder (PTSD) are applicable to that of traumatized animals and whether the phenomena of acquisition, extinction and reactivation of fear behavior in animals are also successfully applicable to humans. This evidence suggests an affirmative answer in both cases. Furthermore, the deficits in gray matter found in PTSD, determined with magnetic resonance imaging, are also observed in traumatized animals, lending neuropsychological support to the use of animals to probe what has gone awry in PTSD. Such animal experiments indicate that the core synaptic circuitry mediating behavior following trauma consists of the amygdala, ventral-medial prefrontal cortex and hippocampus, all of which are modulated by the basal ganglia. It is not clear if this is the case in PTSD as the observations using fMRI are equivocal and open to technical objections. Nevertheless, the effects of the basal ganglia in controlling glutamatergic synaptic transmission through dopaminergic and serotonergic synaptic mechanisms in the core synaptic circuitry provides a ready explanation for why modifying these mechanisms delays extinction in animal models and predisposes towards PTSD. In addition, changes of brain-derived neurotrophic factor (BDNF) in the core synaptic circuitry have significant effects on acquisition and extinction in animal experiments with single nucleotide polymorphisms in the BDNF gene predisposing to PTSD. PMID:25985955

  18. Compact lightweight payload for covert datalink using a multiple quantum well modulating retroreflector on a small rotary-wing unmanned airborne vehicle

    NASA Astrophysics Data System (ADS)

    Gilbreath, G. Charmaine; Rabinovich, William S.; Meehan, Timothy J.; Vilcheck, Michael J.; Mahon, Rita; Burris, Ray; Ferraro, Mina; Sokolsky, Ilene; Vasquez, John A.; Bovais, Chris S.; Cochrell, Kerry; Goins, Kim C.; Barbehenn, Robin; Katzer, D. Scott; Ikossi-Anastasiou, Kiki; Montes, Marcos J.

    2000-11-01

    In this paper, we describe progress in the development of the NRL Multiple Quantum Well modulating retro-reflector including a description of recent demonstrations of an infrared data link between a small rotary-wing unmanned airborne vehicle and a ground based laser interrogator using the NRL multiple quantum well modulating retro-reflector. Modulating retro-reflector systems couple an optical retro- reflector, such as a corner-cube, and an electro-optic shutter to allow two-way optical communications using a laser, telescope and pointer-tracker on only one platform. The NRL modulating retro-reflector uses a semiconductor based multiple quantum well shutter capable of modulation rates up to 10 Mbps, depending on link characteristics. The technology enable the use of near-infrared frequencies, which is well known to provide covert communications immune to frequency allocation problems. The multiple quantum well modulating retro-reflector has the added advantage of being compact, lightweight, covert, and requires very low power. Up to an order of magnitude in onboard power can be saved using a small array of these devices instead of the Radio Frequency equivalent. In the described demonstration, a Mbps optical link to an unmanned aerial vehicle in flight at a range of 100-200 feet is shown. Near real-time compressed video is also demonstrated at the Mbps level.

  19. Lightweight Structures.

    ERIC Educational Resources Information Center

    Shaver and Co., Michigan City, IN.

    One of the newest and most promising developments in architecture has been the use of lightweight structures for encapsulating space. Using this new technology, builders can enclose large and small areas at a fraction of the cost of conventional construction and at the same time provide interior space that is totally flexible. This brochure shows…

  20. Lightweight transformer

    SciTech Connect

    Swallom, D.W.; Enos, G.

    1990-05-01

    The technical effort described in this report relates to the program that was performed to design, fabricate, and test a lightweight transformer for Strategic Defense Initiative Organization (SDIO) mission requirements. The objectives of this program were two-fold: (1) design and fabricate a lightweight transformer using liquid hydrogen as the coolant; and (2) test the completed transformer assembly with a low voltage, dc power source. Although the full power testing with liquid helium was not completed, the program demonstrated the viability of the design approach. The lightweight transformer was designed and fabricated, and low and moderate power testing was completed. The transformer is a liquid hydrogen cooled air core transformer that uses thin copper for its primary and secondary windings. The winding mass was approximately 12 kg, or 0.03 kg/kW. Further refinements of the design to a partial air core transformer could potentially reduce the winding mass to as low as 4 or 5 kg, or 0.0125 kg/kW. No attempt was made on this program to reduce the mass of the related structural components or cryogenic container. 8 refs., 39 figs., 2 tabs.

  1. Modulation of interpersonal trust in borderline personality disorder by intranasal oxytocin and childhood trauma.

    PubMed

    Ebert, Andreas; Kolb, Meike; Heller, Jörg; Edel, Marc-Andreas; Roser, Patrik; Brüne, Martin

    2013-01-01

    Borderline personality disorder (BPD) is characterized by interpersonal difficulties, whereby patients are negatively biased concerning the evaluation of others' trustworthiness. Here, we examined the effect of oxytocin on interpersonal behavior of BPD patients in a trust game, emphasizing the assessment of facial attractiveness of the patients' counterparts in the game, and patients' history of childhood trauma. Thirteen BPD patients and thirteen healthy controls played a trust game after receiving oxytocin or placebo in a randomized, double-blind crossover design. Childhood trauma was evaluated using the Childhood Trauma Questionnaire (CTQ). Patients transferred less money in the oxytocin condition compared to placebo. While healthy controls transferred more money units (MUs) to attractive counterparts than to unattractive ones only after the administration of oxytocin, BPD patients showed this pattern in both conditions. Emotional neglect during childhood negatively correlated with the amount of MUs transferred by patients under oxytocin, but not placebo. Oxytocin had a trust-lowering effect in BPD, which was correlated with patients' history of childhood trauma. Patients' evaluation of interpersonal trust seems to depend more on attractiveness features of their counterparts than in controls, a finding that may have important implications for further research on the usefulness of "prosocial" peptides as an adjunct to psychotherapeutic interventions. PMID:23802121

  2. Lightweight piston

    NASA Technical Reports Server (NTRS)

    Taylor, Allan H. (Inventor)

    1987-01-01

    A lightweight piston composed of carbon-carbon composites is presented. The use of carbon-carbon composites over conventional materials, such as aluminum, reduces piston weight and improves thermal efficiency of the internal combustion reciprocation engine. Due to the negligible coefficient of thermal expansion and unique strength at elevated temperatures of carbon-carbon, the piston-to-cylinder wall clearance is so small as to eliminate the necessity for piston rings. Use of the carbon-carbon composite has the effect of reducing the weight of other reciprocating engine components allowing the piston to run at higher speeds and improving specific engine performance.

  3. ULTRA-LIGHTWEIGHT CEMENT

    SciTech Connect

    Fred Sabins

    2003-10-31

    The objective of this project is to develop an improved ultra- lightweight cement using ultra-lightweight hollow glass spheres (ULHS). This report discusses testing that was performed for analyzing the alkali-silica reactivity of ULHS in cement slurries.

  4. The Significance of Human-Animal Relationships as Modulators of Trauma Effects in Children: A Developmental Neurobiological Perspective

    ERIC Educational Resources Information Center

    Yorke, Jan

    2010-01-01

    Emotional stress and trauma impacts the neurobiology of children. They are especially vulnerable given the developmental plasticity of the brain. The neural synaptic circular processes between the anterior cingulated cortex, prefrontal cortex, amygdala and the hypothalamus are altered. Trauma results in the release of the peptide glucocortisoid,…

  5. ULTRA-LIGHTWEIGHT CEMENT

    SciTech Connect

    Fred Sabins

    2001-07-18

    The objective of this project is to develop an improved ultra-lightweight cement using ultra-lightweight hollow glass spheres (ULHS). Work reported herein addresses Task 1: Assess Ultra-Lightweight Cementing Issues, Task 2: Review Russian Ultra-Lightweight Cement Literature, Task 3: Test Ultra-Lightweight Cements, and Task 8: Develop Field ULHS Cement Blending and Mixing Techniques. Results reported this quarter include: preliminary findings from a literature review focusing on problems associated with ultra-lightweight cements; summary of pertinent information from Russian ultra-lightweight cement literature review; laboratory tests comparing ULHS slurries to foamed slurries and sodium silicate slurries for two different applications; and initial laboratory studies with ULHS in preparation for a field job.

  6. Lightweight Face Mask

    NASA Technical Reports Server (NTRS)

    Cason, W. E. I.; Baucom, R. M.; Evans, R. C.

    1982-01-01

    Lightweight face mask originally developed to protect epileptic patients during seizures could have many other medical and nonmedical applications such as muscular distrophy patients, football linesmen and riot-control police. Masks are extremely lightweight, the lightest of the configurations weighing only 136 grams.

  7. ULTRA-LIGHTWEIGHT CEMENT

    SciTech Connect

    Fred Sabins

    2004-01-30

    The objective of this project is to develop an improved ultra-lightweight cement using ultra-lightweight hollow glass spheres (ULHS). This report discusses testing that was performed for analyzing the alkali-silica reactivity of ULHS in cement slurries.

  8. Lightweight Helmet For Eye/Balance Studies

    NASA Technical Reports Server (NTRS)

    Mcstravick, M. Catherine; Proctor, David R.; Wood, Scott J.

    1988-01-01

    Lightweight helmet serves as mounting platform for stimulus and sensor modules in experiments on role of vestibulo-ocular reflex in motion sickness and space-adaptation syndrome. Fitted liner and five inflatable air bladders stabilize helmet with respect to subject's head. Personal bite board attached to chin-bar assembly makes hard palate in subject's mouth serve as final position reference for helmet.

  9. Facial trauma

    MedlinePlus

    Maxillofacial injury; Midface trauma; Facial injury; LeFort injuries ... Kellman RM. Maxillofacial trauma. In: Flint PW, Haughey BH, Lund LJ, et al, eds. Cummings Otolaryngology: Head & Neck Surgery . 6th ed. Philadelphia, PA: ...

  10. Facial trauma

    MedlinePlus

    Kellman RM. Maxillofacial trauma. In: Flint PW, Haughey BH, Lund LJ, et al, eds. Cummings Otolaryngology: Head & Neck Surgery . 6th ed. Philadelphia, PA: Elsevier Saunders; 2015:chap 23. Mayersak RJ. Facial trauma. In: Marx JA, Hockberger RS, ...

  11. ULTRA-LIGHTWEIGHT CEMENT

    SciTech Connect

    Fred Sabins

    2002-07-30

    The objective of this project is to develop an improved ultra-lightweight cement using ultra-lightweight hollow glass spheres (ULHS). This report includes results from laboratory testing of ULHS systems along with other lightweight cement systems, including foamed and sodium silicate slurries. During this project quarter, a comparison study of the three cement systems examined the effect that cement drillout has on the three cement systems. Testing to determine the effect of pressure cycling on the shear bond properties of the cement systems was also conducted. This report discusses testing that was performed to analyze the alkali-silica reactivity of ULHS in cement slurries.

  12. Light-weight plastination.

    PubMed

    Steinke, Hanno; Rabi, Suganthy; Saito, Toshiyuki; Sawutti, Alimjan; Miyaki, Takayoshi; Itoh, Masahiro; Spanel-Borowski, Katharina

    2008-11-20

    Plastination is an excellent technique which helps to keep the anatomical specimens in a dry, odourless state. Since the invention of plastination technique by von Hagens, research has been done to improve the quality of plastinated specimens. In this paper, we have described a method of producing light-weight plastinated specimens using xylene along with silicone and in the final step, substitute xylene with air. The finished plastinated specimens were light-weight, dry, odourless and robust. This method requires less use of resin thus making the plastination technique more cost-effective. The light-weight specimens are easy to carry and can easily be used for teaching. PMID:18752934

  13. Strengthening lightweight concrete

    NASA Technical Reports Server (NTRS)

    Auskern, A.

    1972-01-01

    Polymer absorption by lightweight concretes to improve bonding between cement and aggregate and to increase strength of cement is discussed. Compressive strength of treated cement is compared with strength of untreated product. Process for producing polymers is described.

  14. Lightweight Materials & Structures

    NASA Video Gallery

    The Lightweight Materials and Structures (LMS) project will mature high-payoff structures and materials technologies that have direct application to NASA’s future space exploration needs.One of the...

  15. Systemic trauma.

    PubMed

    Goldsmith, Rachel E; Martin, Christina Gamache; Smith, Carly Parnitzke

    2014-01-01

    Substantial theoretical, empirical, and clinical work examines trauma as it relates to individual victims and perpetrators. As trauma professionals, it is necessary to acknowledge facets of institutions, cultures, and communities that contribute to trauma and subsequent outcomes. Systemic trauma-contextual features of environments and institutions that give rise to trauma, maintain it, and impact posttraumatic responses-provides a framework for considering the full range of traumatic phenomena. The current issue of the Journal of Trauma & Dissociation is composed of articles that incorporate systemic approaches to trauma. This perspective extends conceptualizations of trauma to consider the influence of environments such as schools and universities, churches and other religious institutions, the military, workplace settings, hospitals, jails, and prisons; agencies and systems such as police, foster care, immigration, federal assistance, disaster management, and the media; conflicts involving war, torture, terrorism, and refugees; dynamics of racism, sexism, discrimination, bullying, and homophobia; and issues pertaining to conceptualizations, measurement, methodology, teaching, and intervention. Although it may be challenging to expand psychological and psychiatric paradigms of trauma, a systemic trauma perspective is necessary on both scientific and ethical grounds. Furthermore, a systemic trauma perspective reflects current approaches in the fields of global health, nursing, social work, and human rights. Empirical investigations and intervention science informed by this paradigm have the potential to advance scientific inquiry, lower the incidence of a broader range of traumatic experiences, and help to alleviate personal and societal suffering. PMID:24617751

  16. ULTRA-LIGHTWEIGHT CEMENT

    SciTech Connect

    Fred Sabins

    2003-01-31

    The objective of this project is to develop an improved ultra-lightweight cement using ultra-lightweight hollow glass spheres (ULHS). This report discusses testing that was performed for analyzing the alkali-silica reactivity of ULHS in cement slurries. DOE joined the Materials Management Service (MMS)-sponsored joint industry project ''Long-Term Integrity of Deepwater Cement under Stress/Compaction Conditions.'' Results of the project contained in two progress reports are also presented in this report.

  17. ULTRA-LIGHTWEIGHT CEMENT

    SciTech Connect

    Fred Sabins

    2001-10-23

    The objective of this project is to develop an improved ultra-lightweight cement using ultra-lightweight hollow glass spheres (ULHS). Work reported herein addresses tasks performed in the fourth quarter as well as the other three quarters of the past year. The subjects that were covered in previous reports and that are also discussed in this report include: Analysis of field laboratory data of active cement applications from three oil-well service companies; Preliminary findings from a literature review focusing on problems associated with ultra-lightweight cements; Summary of pertinent information from Russian ultra-lightweight cement literature review; and Comparison of compressive strengths of ULHS systems using ultrasonic and crush methods Results reported from the fourth quarter include laboratory testing of ULHS systems along with other lightweight cement systems--foamed and sodium silicate slurries. These comparison studies were completed for two different densities (10.0 and 11.5 lb/gal) and three different field application scenarios. Additional testing included the mechanical properties of ULHS systems and other lightweight systems. Studies were also performed to examine the effect that circulation by centrifugal pump during mixing has on breakage of ULHS.

  18. Neuroenteric axis modulates the balance of regulatory T cells and T-helper 17 cells in the mesenteric lymph node following trauma/hemorrhagic shock.

    PubMed

    Morishita, Koji; Coimbra, Raul; Langness, Simone; Eliceiri, Brian P; Costantini, Todd W

    2015-08-01

    CD103(+) dendritic cells (DCs) continuously migrate from the intestine to the mesenteric lymph nodes (MLNs) and maintain tolerance by driving the development of regulatory T cells (Treg) in the gut. The relative expression of Treg and T-helper 17 (Th17) cells determines the balance between tolerance and immunity in the gut. We hypothesized that trauma/hemorrhagic shock (T/HS) would decrease the CD103(+) DC population in the mesenteric lymph and alter the Treg-to-Th17 ratio in the MLN. We further hypothesized that vagus nerve stimulation (VNS) would promote tolerance to inflammation by increasing the Treg-to-Th17 ratio in the MLN after injury. Male rats were assigned to sham shock (SS), trauma/sham shock (T/SS), or T/HS. T/HS was induced by laparotomy and 60 min of HS (blood pressure 35 mmHg) followed by fluid resuscitation. A separate cohort of animals underwent cervical VNS after the HS phase. MLN samples were collected 24 h after resuscitation. The CD103(+) DC population and Treg-to-Th17 cell ratio in the MLN were decreased after T/HS compared with SS and T/SS, suggesting a shift to an inflammatory response. VNS prevented the T/HS-induced decrease in the CD103(+) DC population and increased the Treg-to-Th17 ratio compared with T/HS alone. VNS alters the gut inflammatory response to injury by modulating the Treg-Th17 cell balance in the MLN. VNS promotes tolerance to inflammation in the gut, further supporting its ability to modulate the inflammatory set point and alter the response to injury. PMID:26045612

  19. Sensory Modulation Disorders among Children with a History of Trauma: A Frame of Reference for Speech-Language Pathologists

    ERIC Educational Resources Information Center

    Atchison, Ben J.

    2007-01-01

    Purpose: The purpose of this article is to present definitions and concepts about sensory modulation, illustrate behavioral aspects of sensory modulation disorders, describe a framework for assessment and intervention, and present advances in research. Method: A review of descriptive and evidence-based literature related to the impact of exposure…

  20. Geriatric Trauma.

    PubMed

    Reske-Nielsen, Casper; Medzon, Ron

    2016-08-01

    Within the next 15 years, 1 in 5 Americans will be over age 65. $34 billion will be spent yearly on trauma care of this age group. This section covers situations in trauma unique to the geriatric population, who are often under-triaged and have significant injuries underestimated. Topics covered include age-related pathophysiological changes, underlying existing medical conditions and certain daily medications that increase the risk of serious injury in elderly trauma patients. Diagnostic evaluation of this group requires liberal testing, imaging, and a multidisciplinary team approach. Topics germane to geriatric trauma including hypothermia, elder abuse, and depression and suicide are also covered. PMID:27475011

  1. ULTRA-LIGHTWEIGHT CEMENT

    SciTech Connect

    Fred Sabins

    2001-04-15

    The objective of this project is to develop an improved ultra-lightweight cement using ultralight hollow glass spheres (ULHS). Work reported herein addresses Task 1: Assess Ultra-Lightweight Cementing Problems and Task 3: Test Ultra-Lightweight Cements. Results reported this quarter include a review and summary of Halliburton Energy Services (HES) and BJ Services historical performance data for lightweight cement applications. These data are analyzed and compared to ULHS cement and foamed cement performances. Similar data is expected from Schlumberger, and an analysis of this data will be completed in the following phases of the project. Quality control testing of materials used to formulate ULHS cements in the laboratory was completed to establish baseline material performance standards. A testing protocol was developed employing standard procedures as well as procedures tailored to evaluate ULHS and foamed cement. This protocol is presented and discussed. Results of further testing of ULHS cements are presented along with an analysis to establish cement performance design criteria to be used during the remainder of the project. Finally, a list of relevant literature on lightweight cement performance is compiled for review during the next quarter.

  2. ULTRA-LIGHTWEIGHT CEMENT

    SciTech Connect

    Fred Sabins

    2002-01-23

    The objective of this project is to develop an improved ultra-lightweight cement using ultra-lightweight hollow glass spheres (ULHS). This report includes results from laboratory testing of ULHS systems along with other lightweight cement systems: foamed and sodium silicate slurries. Comparison studies of the three cement systems examined several properties: tensile strength, Young's modulus, water permeability, and shear bond. Testing was also done to determine the effect that temperature cycling has on the shear bond properties of the cement systems. In addition, analysis was carried out to examine alkali silica reactivity of slurries containing ULHS. Data is also presented from a study investigating the effects of mixing and pump circulation on breakage of ULHS. Information is also presented about the field application of ULHS in cementing a 7-in. intermediate casing in south Texas.

  3. ULTRA-LIGHTWEIGHT CEMENT

    SciTech Connect

    Fred Sabins

    2002-04-29

    The objective of this project is to develop an improved ultra-lightweight cement using ultra-lightweight hollow glass spheres (ULHS). This report includes results from laboratory testing of ULHS systems along with other lightweight cement systems, including foamed and sodium silicate slurries. During this project quarter, comparison studies of the three cement systems examined several properties: tensile strength, Young's modulus, and shear bond. Testing to determine the effect of temperature cycling on the shear bond properties of the cement systems was also conducted. In addition, the stress-strain behavior of the cement types was studied. This report discusses a software program that is being developed to help design ULHS cements and foamed cements.

  4. ULTRA-LIGHTWEIGHT CEMENT

    SciTech Connect

    Fred Sabins

    2002-10-31

    The objective of this project is to develop an improved ultra-lightweight cement using ultra-lightweight hollow glass spheres (ULHS). This report includes results from laboratory testing of ULHS systems along with other lightweight cement systems, including foamed and sodium silicate slurries. During this project quarter, a comparison study of the three cement systems examined the effect that cement drillout has on the three cement systems. Testing to determine the effect of pressure cycling on the shear bond properties of the cement systems was also conducted. This report discusses testing that will be performed for analyzing the alkali-silica reactivity of ULHS in cement slurries, as well as the results of Field Tests 1 and 2.

  5. A lightweight ground penetrating radar

    SciTech Connect

    Koppenjan, S.K.; Allen, C.M.; Gardner, D.; Wong, H.R.

    1998-12-31

    The detection of buried objects, particularly unexploded ordnance (UXO), has gained significant interest in the US in the late 1990s. The desire to remediate the thousands of sites worldwide has become an increasing humanitarian concern. The application of radar to this problem has received renewed attention. Bechtel Nevada, Special Technologies Laboratory (STL) has developed several frequency modulated, continuous wave (FM-CW) ground penetrating radar (GPR) units for the US Department of Energy since 1984. To meet these new technical requirements for high resolution data and UXO detection, STL is moving forward with advances to GPR technology, signal processing, and imaging with the development of an innovative system. The goal is to design and fabricate a lightweight, battery operated unit that does not require surface contact and can be operated by a novice user.

  6. Lightweight Electrical Insulation

    NASA Technical Reports Server (NTRS)

    Schroeder, J. E.

    1985-01-01

    Hollow plastic spheres expanded and fused together. Hollow, gasfilled plastic spheres piled in mold. Heating in vacuum softens and expands spheres, forcing them together into nearly regular hexagonal close packing. Foam used as lightweight, electrically insulating material in place of solid ceramic, glass, or polymer. Padding to protect against mechanical shocks another application for such dense, regular foam.

  7. ULTRA-LIGHTWEIGHT CEMENT

    SciTech Connect

    Fred Sabins

    2003-07-31

    The objective of this project is to develop an improved ultra-lightweight cement using ultra-lightweight hollow glass spheres (ULHS). This report discusses testing that was performed for analyzing the alkali-silica reactivity of ULHS in cement slurries. Laboratory testing during the eleventh quarter focused on evaluation of the alkali-silica reaction of eight different cement compositions, four of which contain ULHS. This report provides a progress summary of ASR testing. The original laboratory procedure for measuring set cement expansion resulted in unacceptable erosion of the test specimens. In subsequent tests, a different expansion procedure was implemented and an alternate curing method for cements formulated with TXI Lightweight cement was employed to prevent sample failure caused by thermal shock. The results obtained with the modified procedure showed improvement over data obtained with the original procedure, but data for some compositions were still questionable. Additional modification of test procedures for compositions containing TXI Lightweight cement were implemented and testing is ongoing.

  8. LIGHTWEIGHT GREEN ROOF SYSTEMS

    EPA Science Inventory

    Applying a Lightweight Green Roof System to a building can achieve in managing storm water runoff, decreasing heat gain, yielding energy savings, and mitigating the heat island effect. Currently, Most green roof systems are considerably heavy and require structural reinforceme...

  9. [Chest trauma].

    PubMed

    Freixinet Gilart, Jorge; Ramírez Gil, María Elena; Gallardo Valera, Gregorio; Moreno Casado, Paula

    2011-01-01

    Chest trauma is a frequent problem arising from lesions caused by domestic and occupational activities and especially road traffic accidents. These injuries can be analyzed from distinct points of view, ranging from consideration of the most severe injuries, especially in the context of multiple trauma, to the specific characteristics of blunt and open trauma. In the present article, these injuries are discussed according to the involvement of the various thoracic structures. Rib fractures are the most frequent chest injuries and their diagnosis and treatment is straightforward, although these injuries can be severe if more than three ribs are affected and when there is major associated morbidity. Lung contusion is the most common visceral lesion. These injuries are usually found in severe chest trauma and are often associated with other thoracic and intrathoracic lesions. Treatment is based on general support measures. Pleural complications, such as hemothorax and pneumothorax, are also frequent. Their diagnosis is also straightforward and treatment is based on pleural drainage. This article also analyzes other complex situations, notably airway trauma, which is usually very severe in blunt chest trauma and less severe and even suitable for conservative treatment in iatrogenic injury due to tracheal intubation. Rupture of the diaphragm usually causes a diaphragmatic hernia. Treatment is always surgical. Myocardial contusions should be suspected in anterior chest trauma and in sternal fractures. Treatment is conservative. Other chest injuries, such as those of the great thoracic and esophageal vessels, are less frequent but are especially severe. PMID:21640287

  10. Tailbone trauma

    MedlinePlus

    Choi SB, Cwinn AA. Pelvic trauma. In: Marx JA, Hockberger RS, Walls RM, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice. 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap 55. Vora ...

  11. Strong, Lightweight, Porous Materials

    NASA Technical Reports Server (NTRS)

    Leventis, Nicholas; Meador, Mary Ann B.; Johnston, James C.; Fabrizio, Eve F.; Ilhan, Ulvi

    2007-01-01

    A new class of strong, lightweight, porous materials has been invented as an outgrowth of an effort to develop reinforced silica aerogels. The new material, called X-Aerogel is less hygroscopic, but no less porous and of similar density to the corresponding unmodified aerogels. However, the property that sets X-Aerogels apart is their mechanical strength, which can be as much as two and a half orders of magnitude stronger that the unmodified aerogels. X-Aerogels are envisioned to be useful for making extremely lightweight, thermally insulating, structural components, but they may also have applications as electrical insulators, components of laminates, catalyst supports, templates for electrode materials, fuel-cell components, and filter membranes.

  12. Lightweight solar cell

    SciTech Connect

    Hotaling, S.P.

    1993-06-22

    A lightweight solar cell is described comprising: (a) an LD aerogel substrate having a density of between 10-1,000 mg/cc, the surface of the substrate being polished (b) a dielectric planarization layer being applied to the polished surface, and (c) at least one layer of PV material deposited thereon. The solar cell having a plurality of PV layers deposited on the planarization layer.

  13. Lightweight Solar Photovoltaic Blankets

    NASA Technical Reports Server (NTRS)

    Ceragioli, R.; Himmler, R.; Nath, P.; Vogeli, C.; Guha, S.

    1995-01-01

    Lightweight, flexible sheets containing arrays of stacked solar photovoltaic cells developed to supply electric power aboard spacecraft. Solar batteries satisfying stringent requirements for operation in outer space also adaptable to terrestrial environment. Attractive for use as long-lived, portable photovoltaic power sources. Cells based on amorphous silicon which offers potential for order-of-magnitude increases in power per unit weight, power per unit volume, and endurance in presence of ionizing radiation.

  14. Thin, Lightweight Solar Cell

    NASA Technical Reports Server (NTRS)

    Brandhorst, Henry W., Jr.; Weinberg, Irving

    1991-01-01

    Improved design for thin, lightweight solar photovoltaic cells with front contacts reduces degradation of electrical output under exposure to energetic charged particles (protons and electrons). Increases ability of cells to maintain structural integrity under exposure to ultraviolet radiation by eliminating ultraviolet-degradable adhesives used to retain cover glasses. Interdigitated front contacts and front junctions formed on semiconductor substrate. Mating contacts formed on back surface of cover glass. Cover glass and substrate electrostatically bonded together.

  15. Essential Amino Acid Enriched High-Protein Enteral Nutrition Modulates Insulin-Like Growth Factor-1 System Function in a Rat Model of Trauma-Hemorrhagic Shock

    PubMed Central

    Xia, Xianfeng; Wang, Xinying; Li, Qiurong; Li, Ning; Li, Jieshou

    2013-01-01

    Background Nutrition support for critically ill patients supplemented with additional modular protein may promote skeletal muscle protein anabolism in addition to counteracting acute nitrogen loss. The present study was designed to investigate whether the essential amino acid (EAA) enriched high-protein enteral nutrition (EN) modulates the insulin-like growth factor-1 (IGF-1) system and activates the mammalian target of rapamycin (mTOR) anabolic signaling pathway in a trauma-hemorrhagic shock (T-HS) rat model. Methodology/Principal Findings Male Sprague-Dawley rats (n = 90, 278.18±0.94 g) were randomly assigned to 5 groups: (1) normal control, (2) pair-fed, (3) T-HS, (4) T-HS and standard EN, and (5) T-HS and EAA enriched high-protein EN. Six animals from each group were harvested on days 2, 4, and 6 for serum, gastrocnemius, soleus, and extensor digitorum longus sample collection. T-HS significantly reduced muscle mass. Nutrition support maintained muscle mass, especially the EAA enriched high-protein EN. Meanwhile, a pronounced derangement in IGF-1-IGFBPs axis as well as impaired mTOR transduction was observed in the T-HS group. Compared with animals receiving standard EN, those receiving EAA enriched high-protein EN presented 18% higher serum free IGF-1 levels following 3 days of nutrition support and 22% higher after 5 days. These changes were consistent with the concomitant elevation in serum insulin and reduction in corticosterone levels. In addition, phosphorylations of downstream anabolic signaling effectors - including protein kinase B, mTOR, and ribosomal protein S6 kinase1 - increased significantly in rats receiving EAA enriched high-protein EN. Conclusion/Significance Our findings firstly demonstrate the beneficial effect of EAA enriched high-protein EN on the metabolic modulation of skeletal muscle protein anabolism by regulating the IGF-1 system and downstream anabolic signaling transduction. PMID:24204984

  16. Lightweight bipolar storage battery

    NASA Technical Reports Server (NTRS)

    Rowlette, John J. (Inventor)

    1992-01-01

    An apparatus [10] is disclosed for a lightweight bipolar battery of the end-plate cell stack design. Current flow through a bipolar cell stack [12] is collected by a pair of copper end-plates [16a,16b] and transferred edgewise out of the battery by a pair of lightweight, low resistance copper terminals [28a,28b]. The copper terminals parallel the surface of a corresponding copper end-plate [16a,16b] to maximize battery throughput. The bipolar cell stack [12], copper end-plates [16a,16b] and copper terminals [28a,28b] are rigidly sandwiched between a pair of nonconductive rigid end-plates [20] having a lightweight fiber honeycomb core which eliminates distortion of individual plates within the bipolar cell stack due to internal pressures. Insulating foam [30] is injected into the fiber honeycomb core to reduce heat transfer into and out of the bipolar cell stack and to maintain uniform cell performance. A sealed battery enclosure [ 22] exposes a pair of terminal ends [26a,26b] for connection with an external circuit.

  17. Elderly trauma.

    PubMed

    Holleran, Renee Semonin

    2015-01-01

    Across the world, the population is aging. Adults 65 years and older make up one of the fastest growing segments of the US population. Trauma is a disease process that affects all age groups. The mortality and morbidity that result from an injury can be influenced by many factors including age, physical condition, and comorbidities. The management of the elderly trauma patient can present some unique challenges. This paper addresses the differences that occur in the management of elderly patient who has been injured. This paper also includes a discussion of how to prevent injury in the elderly. PMID:26039652

  18. Lightweight piston architecture

    NASA Technical Reports Server (NTRS)

    Taylor, Allan H. (Inventor); Ransone, Philip O. (Inventor)

    1990-01-01

    The invention is an improvement in a lightweight carbon-carbon composite piston, the improvement uses near-net shape knitted or warp-interlock preforms to improve the structural qualities of the piston. In its preferred embodiment, a one piece, tubular, closed-ended, knitted preform (a sock) of carbon fibers embedded within the matrix of the piston structure forms the crown, side wall, skirt and inner surface of the piston, and wrap-interlock preforms strengthen the piston crown and wrist pin bosses.

  19. Lightweight reflector assembly

    NASA Technical Reports Server (NTRS)

    Argoud, M. J.; Jolley, J.; Walker, W. L. (Inventor)

    1977-01-01

    An inexpensive, lightweight reflective assembly member having good optical quality and particularly adaptable to accommodating temperature variations without providing destructive thermal stresses and reflective slope errors is described. The reflective assembly consists of a thin sheet of glass with appropriate reflective coating and a cellular glass block substrate bonded together. The method of fabrication includes abrading the cellular substrate with an abrasive master die to form an appropriate concave surface. An adhesive is applied to the abraded surface and a lamina reflective surface is placed under a uniform pressure to conform the reflective surface onto the desired abraded surface of the substrate.

  20. Shock trauma.

    PubMed

    Trunkey, D D

    1984-09-01

    Trauma - accidental or intentional injury - is a major health and social problem. It is still the chief cause of death in people between the ages of 1 and 38 years. In the United States, the mortality due to trauma between the ages of 15 and 24 years increased by 13% from 1960 to 1978. During the same period, the mortality for people aged 25 to 64 years declined by 16%. Murders have increased from 8464 in 1960, to 26 000 in 1982. The overall death rate of American teenagers and young adults is 50% higher than that of their counterparts in Britain, Sweden and Japan. Trauma affects young, productive citizens, and the estimated costs for death, disability and loss of productivity exceed $230 million a day. The most tragic statistic is that at least 40% of the deaths are needless and preventable if better treatment and prevention programs were available. Trauma deaths that might be prevented are those due to motor vehicle accidents, homicide, burns, and alcohol and drug abuse. In this paper suggestions for prevention are made. They include improved crash worthiness of motor vehicles, revocation of drunk drivers' licences, use of devices that limit drunk drivers, increased tax on alcohol and random breathalyser tests, and the use of seat belts and motorcycle helmets. Control of hand-guns and burn characteristics of cigarettes could also reduce deaths. The problems and issues in trauma care can be divided into two broad categories: system and professional. System problems include prehospital care, in-hospital care, rehabilitation and prevention. Professional problems include education, research, economics, and quality.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:6478325

  1. Staring arrays - The future lightweight imagers

    NASA Astrophysics Data System (ADS)

    Dennis, P. N. J.; Dann, R. J.

    1985-01-01

    High performance thermal imagers, such as the common modules, are now readily available. These systems generally employ a scanning mechanism to generate the two-dimensional display which makes their adaptation to cheap, lightweight, small imagers difficult. However, with the advent of two-dimensional close packed arrays of infrared detectors the development of such a system is now becoming feasible. A small imager using cadium mercury telluride detectors has been produced commercially. The system has been designed to be adaptable to use both 3-5-micrometer and 8-14-micrometer arrays, and to study various electronic correction mechanisms.

  2. Lightweight flywheel containment

    DOEpatents

    Smith, James R.

    2001-01-01

    A lightweight flywheel containment composed of a combination of layers of various material which absorb the energy of a flywheel structural failure. The various layers of material act as a vacuum barrier, momentum spreader, energy absorber, and reaction plate. The flywheel containment structure has been experimentally demonstrated to contain carbon fiber fragments with a velocity of 1,000 m/s and has an aerial density of less than 6.5 g/square centimeters. The flywheel containment, may for example, be composed of an inner high toughness structural layer, and energy absorbing layer, and an outer support layer. Optionally, a layer of impedance matching material may be utilized intermediate the flywheel rotor and the inner high toughness layer.

  3. Lightweight flywheel containment

    DOEpatents

    Smith, James R.

    2004-06-29

    A lightweight flywheel containment composed of a combination of layers of various material which absorb the energy of a flywheel structural failure. The various layers of material act as a vacuum barrier, momentum spreader, energy absorber, and reaction plate. The flywheel containment structure has been experimentally demonstrated to contain carbon fiber fragments with a velocity of 1,000 m/s and has an aerial density of less than 6.5 g/square centimeters. The flywheel containment, may for example, be composed of an inner high toughness structural layer, and energy absorbing layer, and an outer support layer. Optionally, a layer of impedance matching material may be utilized intermediate the flywheel rotor and the inner high toughness layer.

  4. Penetrating trauma

    PubMed Central

    Kuhajda, Ivan; Zarogoulidis, Konstantinos; Kougioumtzi, Ioanna; Huang, Haidong; Li, Qiang; Dryllis, Georgios; Kioumis, Ioannis; Pitsiou, Georgia; Machairiotis, Nikolaos; Katsikogiannis, Nikolaos; Papaiwannou, Antonis; Lampaki, Sofia; Zaric, Bojan; Branislav, Perin; Dervelegas, Konstantinos; Porpodis, Konstantinos

    2014-01-01

    Pneumothorax occurs when air enters the pleural space. Currently there is increasing incidence of road traffic accidents, increasing awareness of healthcare leading to more advanced diagnostic procedures, and increasing number of admissions in intensive care units are responsible for traumatic (non iatrogenic and iatrogenic) pneumothorax. Pneumothorax has a clinical spectrum from asymptomatic patient to life-threatening situations. Diagnosis is usually made by clinical examination and imaging techniques. In our current work we focus on the treatment of penetrating trauma. PMID:25337403

  5. Penetrating trauma.

    PubMed

    Kuhajda, Ivan; Zarogoulidis, Konstantinos; Kougioumtzi, Ioanna; Huang, Haidong; Li, Qiang; Dryllis, Georgios; Kioumis, Ioannis; Pitsiou, Georgia; Machairiotis, Nikolaos; Katsikogiannis, Nikolaos; Papaiwannou, Antonis; Lampaki, Sofia; Zaric, Bojan; Branislav, Perin; Dervelegas, Konstantinos; Porpodis, Konstantinos; Zarogoulidis, Paul

    2014-10-01

    Pneumothorax occurs when air enters the pleural space. Currently there is increasing incidence of road traffic accidents, increasing awareness of healthcare leading to more advanced diagnostic procedures, and increasing number of admissions in intensive care units are responsible for traumatic (non iatrogenic and iatrogenic) pneumothorax. Pneumothorax has a clinical spectrum from asymptomatic patient to life-threatening situations. Diagnosis is usually made by clinical examination and imaging techniques. In our current work we focus on the treatment of penetrating trauma. PMID:25337403

  6. Advanced lightweight ceramic candle filter module

    SciTech Connect

    Zievers, J.F.; Eggerstedt, P.

    1992-01-01

    To determine the economic effect of light weight ceramics, several sizes of filters were cost estimated for operation at 217.5 psi (15 bar) based on the use of all light weight ceramics (Fibro/Fibro) vs. the use of cooled alloy (RA300) tubesheets and silicon carbide candles (Alloy/SiC). A jet pulse delivery system was included in both estimates. The Fibro/Fibro system was estimated with the plenum design while the Alloy/SiC system was based on header/nozzle design. Battery limits were the filters and jet pulse delivery systems, Ex-works, with no main valves or dust removal systems. It was found that the cost of Fibro/Fibro components were consistently lower than the cost of the Alloy/SiC components; this comparison is illustrated in Figure 8.

  7. Advanced lightweight ceramic candle filter module

    SciTech Connect

    Zievers, J.F.; Eggerstedt, P.

    1992-11-01

    To determine the economic effect of light weight ceramics, several sizes of filters were cost estimated for operation at 217.5 psi (15 bar) based on the use of all light weight ceramics (Fibro/Fibro) vs. the use of cooled alloy (RA300) tubesheets and silicon carbide candles (Alloy/SiC). A jet pulse delivery system was included in both estimates. The Fibro/Fibro system was estimated with the plenum design while the Alloy/SiC system was based on header/nozzle design. Battery limits were the filters and jet pulse delivery systems, Ex-works, with no main valves or dust removal systems. It was found that the cost of Fibro/Fibro components were consistently lower than the cost of the Alloy/SiC components; this comparison is illustrated in Figure 8.

  8. Coast Guard Firefighting Module

    NASA Technical Reports Server (NTRS)

    1977-01-01

    NASA and the U.S. Coast Guard are jointly developing a lightweight, helicopter-transportable, completely self-contained firefighting module for combating shipboard and dockside fires. The project draws upon NASA technology in high-capacity rocket engine pumps, lightweight materials and compact packaging.

  9. Lightweight ceramic insulation and method

    NASA Technical Reports Server (NTRS)

    Green, David J. (Inventor)

    1990-01-01

    A process is disclosed for manufacturing a low density ceramic powder which can be formed to make a lightweight material for insulation or other construction. The ceramic product made from the process has a final density of less than 25 to about 1 percent of the theoretical weight of the ceramic powder. The ceramic product is lightweight and can be made to withstand high temperatures greater than 1400 C.

  10. Replication of lightweight mirrors

    NASA Astrophysics Data System (ADS)

    Chen, Ming Y.; Matson, Lawrence E.; Lee, Heedong; Chen, Chenggang

    2009-08-01

    The fabrication of lightweight mirror assemblages via a replication technique offers great potential for eliminating the high cost and schedule associated with the grinding and polishing steps needed for conventional glass or SiC mirrors. A replication mandrel is polished to an inverse figure shape and to the desired finish quality. It is then, coated with a release layer, the appropriate reflective layer, and followed by a laminate for coefficient of thermal expansion (CTE) tailorability and strength. This optical membrane is adhered to a mirror structural substrate with a low shrinkage, CTE tailored adhesive. Afterwards, the whole assembly is separated from the mandrel. The mandrel is then cleaned and reused for the next replication run. The ultimate goal of replication is to preserve the surface finish and figure of the optical membrane upon its release from the mandrel. Successful replication requires a minimization of the residual stresses within the optical coating stack, the curing stresses from the adhesive and the thermal stress resulting from CTE mismatch between the structural substrate, the adhesive, and the optical membrane. In this paper, the results on replicated trials using both metal/metal and ceramic/ceramic laminates adhered to light weighted structural substrates made from syntactic foams (both inorganic and organic) will be discussed.

  11. Lightweight hydride storage materials

    SciTech Connect

    Thomas, G.J.; Guthrie, S.E.; Bauer, W.

    1995-09-01

    The need for lightweight hydrides in vehicular applications has prompted considerable research into the use of magnesium and its alloys. Although this earlier work has provided some improved performance in operating temperature and pressure, substantial improvements are needed before these materials will significantly enhance the performance of an engineered system on a vehicle. We are extending the work of previous investigators on Mg alloys to reduce the operating temperature and hydride heat of formation in light weight materials. Two important results will be discussed in this paper: (1) a promising new alloy hydride was found which has better pressure-temperature characteristics than any previous Mg alloy and, (2) a new fabrication process for existing Mg alloys was developed and demonstrated. The new alloy hydride is composed of magnesium, aluminum and nickel. It has an equilibrium hydrogen overpressure of 1.3 atm. at 200{degrees}C and a storage capacity between 3 and 4 wt.% hydrogen. A hydrogen release rate of approximately 5 x 10{sup -4} moles-H{sub 2}/gm-min was measured at 200{degrees}C. The hydride heat of formation was found to be 13.5 - 14 kcal/mole-H{sub 2}, somewhat lower than Mg{sub 2}Ni. The new fabrication method takes advantage of the high vapor transport of magnesium. It was found that Mg{sub 2}Ni produced by our low temperature process was better than conventional materials because it was single phase (no Mg phase) and could be fabricated with very small particle sizes. Hydride measurements on this material showed faster kinetic response than conventional material. The technique could potentially be applied to in-situ hydride bed fabrication with improved packing density, release kinetics, thermal properties and mechanical stability.

  12. Toxic trauma.

    PubMed

    Moles, T M; Baker, D J

    2001-01-01

    Hazardous materials (HAZMAT) carry many inherent dangers. Such materials are distributed widely in industrial and military sites. Toxic trauma (TT) denotes the complex of systemic and organ injury caused by toxic agents. Often, TT is associated with other injuries that also require the application of life-support techniques. Rapid onset of acute respiratory failure and consequent cardiovascular failure are of primary concern. Management of TT casualties is dependent upon the characteristics of the toxic agents involved and on the demographics surrounding the HAZMAT incident. Agents that can produce TT possess two pairs of salient characteristics: (1) causality (toxicity and latency), and (2) EMS system (persistency and transmissibility). Two characteristics of presentations are important: (1) incident presentation, and (2) casualty presentation. In addition, many of these agents complicate the processes associated with anaesthesia and must be dealt with. Failure of recognition of these factors may result in the development of respiratory distress syndromes and multiorgan system failure, or even death. PMID:11513285

  13. Making a Lightweight Battery Plaque

    NASA Technical Reports Server (NTRS)

    Reid, M. A.; Post, R. E.; Soltis, D.

    1986-01-01

    Plaque formed in porous plastic by electroless plating. Lightweight plaque prepared by electroless plating of porous plastic contains embedded wire or expanded metal grid. Plastic may or may not be filled with soluble pore former. If it contains soluble pore former, treated to remove soluble pore former and increase porosity. Porous plastic then clamped into rig that allows plating solutions to flow through plastic. Lightweight nickel plaque used as electrode substrate for alkaline batteries, chiefly Ni and Cd electrodes, and for use as electrolyte-reservoir plates for fuel cells.

  14. NASA space shuttle lightweight seat

    NASA Technical Reports Server (NTRS)

    Hansen, Chris; Jermstad, Wayne; Lewis, James; Colangelo, Todd

    1996-01-01

    The Space Shuttle Lightweight Seat-Mission Specialist (LWS-MS) is a crew seat for the mission specialists who fly aboard the Space Shuttle. The LWS-MS is a lightweight replacement for the mission specialist seats currently flown on the Shuttle. Using state-of-the-art analysis techniques, a team of NASA and Lockheed engineers from the Johnson Space Center (JSC) designed a seat that met the most stringent requirements demanded of the new seats by the Shuttle program, and reduced the weight of the seats by 52%.

  15. Lightweight solar array blanket tooling, laser welding and cover process technology

    NASA Technical Reports Server (NTRS)

    Dillard, P. A.

    1983-01-01

    A two phase technology investigation was performed to demonstrate effective methods for integrating 50 micrometer thin solar cells into ultralightweight module designs. During the first phase, innovative tooling was developed which allows lightweight blankets to be fabricated in a manufacturing environment with acceptable yields. During the second phase, the tooling was improved and the feasibility of laser processing of lightweight arrays was confirmed. The development of the cell/interconnect registration tool and interconnect bonding by laser welding is described.

  16. Lightweight Deployable Mirrors with Tensegrity Supports

    NASA Technical Reports Server (NTRS)

    Zeiders, Glenn W.; Bradford, Larry J.; Cleve, Richard C.

    2004-01-01

    The upper part of Figure 1 shows a small-scale prototype of a developmental class of lightweight, deployable structures that would support panels in precise alignments. In this case, the panel is hexagonal and supports disks that represent segments of a primary mirror of a large telescope. The lower part of Figure 1 shows a complete conceptual structure containing multiple hexagonal panels that hold mirror segments. The structures of this class are of the tensegrity type, which was invented five decades ago by artist Kenneth Snelson. A tensegrity structure consists of momentfree compression members (struts) and tension members (cables). The structures of this particular developmental class are intended primarily as means to erect large segmented primary mirrors of astronomical telescopes or large radio antennas in outer space. Other classes of tensegrity structures could also be designed for terrestrial use as towers, masts, and supports for general structural panels. An important product of the present development effort is the engineering practice of building a lightweight, deployable structure as an assembly of tensegrity modules like the one shown in Figure 2. This module comprises two octahedral tensegrity subunits that are mirror images of each other joined at their plane of mirror symmetry. In this case, the plane of mirror symmetry is both the upper plane of the lower subunit and the lower plane of the upper subunit, and is delineated by the midheight triangle in Figure 2. In the configuration assumed by the module to balance static forces under mild loading, the upper and lower planes of each sub-unit are rotated about 30 , relative to each other, about the long (vertical) axis of the structure. Larger structures can be assembled by joining multiple modules like this one at their sides or ends. When the module is compressed axially (vertically), the first-order effect is an increase in the rotation angle, but by virtue of the mirror arrangement, the net

  17. Lightweight Distributed Metric Service (LDMS)

    Energy Science and Technology Software Center (ESTSC)

    2013-09-14

    LDMS is a framework for collecting system data from computational clusters and transporting it off the cluster. It utilizes existing data sources on the cluster (e.g., temperature sensors, network traffic counters). The collection and transport mechanisms of LDMS are lightweight and do not significantly adversely impact the performance of the applications running concurrently on the cluster.

  18. Lightweight Valve Closes Duct Quickly

    NASA Technical Reports Server (NTRS)

    Fournier, Walter L.; Burgy, N. Frank

    1991-01-01

    Expanding balloon serves as lightweight emergency valve to close wide duct. Uninflated balloon stored in housing of duct. Pad resting on burst diaphragm protects balloon from hot gases in duct. Once control system triggers valve, balloon inflates rapidly to block duct. Weighs much less than does conventional butterfly, hot-gas, or poppet valve capable of closing duct of equal diameter.

  19. Lightweight Thermal-Protection System

    NASA Technical Reports Server (NTRS)

    Macconochie, I. O.; Lawson, A. G.; Whiteman, T. C.; Brien, E. P.

    1983-01-01

    Hexagonal honeycomb panels secured by Y-shaped plates form lightweight, easily-maintained thermal-protection system. Honeycomb outer panel and fastener materials are selected to match local heating rates. Typical materials include composites, titanium, superalloys, and refractory metals. Advantages include complete symmetry of components--there are no left- or right-hand parts and no asymmetry in thermal expansion.

  20. Lightweight, Wearable, Metal Rubber Sensor

    NASA Technical Reports Server (NTRS)

    Hill, Andrea

    2015-01-01

    For autonomous health monitoring. NanoSonic, Inc., has developed comfortable garments with multiple integrated sensors designed to monitor astronaut health throughout long-duration space missions. The combined high electrical conductivity, low mechanical modulus, and environmental robustness of the sensors make them an effective, lightweight, and comfortable alternative to conventional use of metal wiring and cabling.

  1. Lightweight Cathodes For Nickel Batteries

    NASA Technical Reports Server (NTRS)

    Britton, Doris L.

    1996-01-01

    Lightweight cathodes for rechargeable nickel-based electrochemical cells undergoing development. In cathodes, mats of nickel fibers are substrates providing structural support of, and electrical contact with, active cathode material. Offers specific energies greater than sintered nickel plaque cathodes. Electrodes used in rechargeable batteries for applications in which weight major concern, including laptop computers, cellular phones, flashlights, soldiers' backpacks, and electric vehicles.

  2. Rural trauma management.

    PubMed

    Wayne, R

    1989-05-01

    Rural trauma is a major problem in the United States. Up to 70 percent of trauma fatalities occur in rural areas, even though 70 percent of the population live in urban areas. Over the past 3 decades, numerous studies have defined the concept of preventable trauma death in both rural and urban populations. With the development of a regional trauma care system in Oregon, preventable trauma mortality should decrease. An effort was made to improve the quality of trauma care in Clatsop County, Oregon, a community of 30,000 people with 2 small rural hospitals. To obtain this goal, four steps were taken: (1) physician and nurse education was improved, (2) trauma protocols promoting prompt resuscitation and stabilization of patients were established, (3) regular trauma case reviews were conducted, and (4) emergency medical technician and prehospital management were coordinated. This study reviews the trail from sporadic, uncoordinated rural trauma care to the designation process. PMID:2712202

  3. Relationship between trauma narratives and trauma pathology.

    PubMed

    Amir, N; Stafford, J; Freshman, M S; Foa, E B

    1998-04-01

    In this study we examined the relationship between posttrauma pathology and the level of articulation (complexity) in rape narratives recounted by victims shortly after the assault. Degree of articulation was operationalized as the reading level of the narrative as determined by a computer program. Shortly after the trauma, reading level was correlated with severity of anxiety but not with posttraumatic stress disorder (PTSD) symptoms. Degree of the narrative articulation shortly after the trauma, however, was related to severity of later PTSD. These results are consistent with the hypothesis that the less developed trauma narratives hinder recovery from trauma. PMID:9565923

  4. Exomerge user's manual : a lightweight Python interface for manipulating Exodus files.

    SciTech Connect

    Kostka, Timothy D.

    2013-01-01

    Exomerge is a lightweight Python module for reading, manipulating and writing data within ExodusII files. It is built upon a Python wrapper around the ExodusII API functions. This module, the Python wrapper, and the ExodusII libraries are available as part of the standard SIERRA installation.

  5. Helping Youth Overcome Trauma

    ERIC Educational Resources Information Center

    Chambers, Jamie C.

    2005-01-01

    The effects of trauma can roll on unchecked like a spirit of death. In its path are strewn its once vibrant victims. Human bonds are rent asunder by the disgrace of trauma. These are the youngsters who have been verbally bashed, physically battered, sexually assaulted, and spiritually exploited. Other traumas of childhood neglect include: (1)…

  6. Light-weight ceramic insulation

    NASA Technical Reports Server (NTRS)

    Hsu, Ming-Ta S. (Inventor); Chen, Timothy S. (Inventor)

    2002-01-01

    Ultra-high temperature, light-weight, ceramic insulation such as ceramic tile is obtained by pyrolyzing a siloxane gel derived from the reaction of at least one organo dialkoxy silane and at least one tetralkoxy silane in an acid or base liquid medium. The reaction mixture of the tetra- and dialkoxy silanes may contain also an effective amount of a mono- or trialkoxy silane to obtain the siloxane gel. The siloxane gel is dried at ambient pressures to form a siloxane ceramic precursor without significant shrinkage. The siloxane ceramic precursor is subsequently pyrolyzed, in an inert atmosphere, to form the black ceramic insulation comprising atoms of silicon, carbon and oxygen. The ceramic insulation, can be characterized as a porous, uniform ceramic tile resistant to oxidation at temperatures ranging as high as 1700.degree. C. and is particularly useful as lightweight tiles for spacecraft and other high-temperature insulation applications.

  7. Lightweight Space Tug body structure

    NASA Technical Reports Server (NTRS)

    Lager, J. R.

    1976-01-01

    Lightweight honeycomb sandwich construction using a wide variety of metal and fibrous composite faceskins was used in the design of a typical Space Tug skirt structure. Relatively low magnitude combined loading of axial compression and torsion resulted in designs using ultrathin faceskins, lightweight honeycomb cores, and thin faceskin/core adhesive bond layers. Two of the designs with metal faceskins (aluminum and titanium) and four with fibrous composite faceskins (using combinations of fiberglass, boron, and graphite) were evaluated through the fabrication and structural test of a series of small development panels. The two most promising concepts with aluminum and graphite/epoxy faceskins, were further evaluated through the fabrication and structural test of larger compression and shear panels. All panels tested exceeded design ultimate load levels, thereby, verifying the structural integrity of the selected designs. Projected skirt structural weights for the graphite/epoxy and aluminum concepts fall within original weight guidelines established for the Space Tug vehicle.

  8. Performance of lightweight nickel electrodes

    NASA Technical Reports Server (NTRS)

    Britton, Doris L.

    1988-01-01

    The NASA Lewis Research Center is currently developing nickel electrodes for nickel-hydrogen (Ni-H2) batteries. These electrodes are lighter in weight and have higher energy densities than the heavier state-of-the-art (SOA) sintered nickel electrodes. In the present approach, lightweight materials or plaques are used as conductive supports for the nickel hydroxide active material. These plaques (fiber and felt, nickel plated plastic and graphite) are commercial products that are fabricated into nickel electrodes by electrochemically impregnating them with active material. Evaluation is performed in half cells structured in the bipolar configuration. Initial performance tests include capacity measurements at five discharge levels, C/2, 1.0C, 1.37C, 2.0C and 2.74C. The electrodes that pass the initial tests are life cycle tested in a low earth orbit regime at 80 percent depth of discharge. Different formulations of nickel fiber materials obtained from several manufacturers are currently being tested as possible candidates for nickel electrodes. One particular lightweight fiber mat electrode has accumulated over 3000 cycles to date, with stable capacity and voltage. Life and performance data of this electrode were investigated and presented. Good dimensional stability and active material adherence have been demonstrated in electrodes made from this lightweight plaque.

  9. Performance of lightweight nickel electrodes

    NASA Technical Reports Server (NTRS)

    Britton, Doris L.

    1988-01-01

    The NASA Lewis Research Center is currently developing nickel electrodes for nickel-hydrogen (Ni-H2) batteries. These electrodes are lighter in weight and have higher energy densities than the heavier state-of-the-art (SOA) sintered nickel electrodes. In the present approach, lightweight materials or plaques are used as conductive supports for the nickel hydroxide active material. These plaques (fiber and felt, nickel plated plastic and graphite) are commercial products that are fabricated into nickel electrodes by electrochemically impregnating them with active material. Evaluation is performed in half cells structured in the bipolar configuration. Initial performance tests include capacity measurements at five discharge levels, C/2, 1.0C 1.37C, 2.0C and 2.74C. The electrodes that pass the initial tests are life cycle tested in a low Earth orbit regime at 80 percent depth of discharge. Different formulations of nickel fiber materials obtained from several manufacturers are currently being tested as possible candidates for nickel electrodes. One particular lightweight fiber mat electrode has accumulated over 3000 cycles to date, with stable capacity and voltage. Life and performance data of this electrode were investigated and presented. Good dimensional stability and active material adherence have been demonstrated in electrodes made from this lightweight plaque.

  10. Directly polished lightweight aluminum mirror

    NASA Astrophysics Data System (ADS)

    ter Horst, Rik; Tromp, Niels; de Haan, Menno; Navarro, Ramon; Venema, Lars; Pragt, Johan

    2008-07-01

    During the last ten years, Astron has been a major contractor for the design and manufacturing of astronomical instruments for Space- and Earth based observatories, such as VISIR, MIDI, SPIFFI, X-Shooter and MIRI. The collaboration between optical- and mechanical designers at Astron led to new design philosophies and strategies. Driven by the need to reduce the weight of optically ultra-stiff structures, two promising techniques have been developed in the last years: ASTRON Extreme Lightweighting for mechanical structures and an improved Polishing Technique for Aluminum Mirrors. Using one single material for both optical components and mechanical structure simplifies the design of a cryogenic instrument significantly, it is very beneficial during instrument test and verification, and makes the instrument insensitive to temperature changes. Aluminum has been the main material used for cryogenic optical instruments, and optical aluminum mirrors are generally diamond turned. The application of a polishable hard top coating like nickel removes excess stray light caused by the groove pattern, but limits the degree of lightweighting of the mirrors due to the bi-metal effect. By directly polishing the aluminum mirror surface, the recent developments at Astron allow for using a non-exotic material for light weighted yet accurate optical mirrors, with a lower surface roughness (~1nm RMS), higher surface accuracy and reduced light scattering. This paper presents the techniques, obtained results and a global comparison with alternative lightweight mirror solutions.

  11. Lightweight materials for automotive applications

    SciTech Connect

    Cole, G.S.; Sherman, A.M.

    1995-07-01

    As a result of more stringent requirements for improved fuel economy and emissions, there is a growing tend to substitute Al and Mg for conventional steel and cast irons in vehicles. this article describes some of the technical issues that must be considered if the automotive industry is to utilize these lightweight materials in larger volumes. Lightweight metals may be used in the vehicle in both wrought and cast forms. Aluminum, in the form of stamped sheet, has the potential to be used extensively in vehicle structures and closures. However, compared to steel, aluminum is more difficult to stamp and spot weld. Current research is exploring ways of improving the formability of Al alloys and developing alternate joining methods including adhesive bonding and fasteners. Mg, Al, and metal-matrix composite casting have the potential to be used as replacements for many ferrous castings in power-train and chassis components. However, because of their different tribology, strength, and ductility, light-metal castings require improved foundry procedures and more sophisticated design rules before product engineers will use them in larger quantities. A major challenge for lightweight materials is the ability to produce a functional component at an acceptable price. The presentation concludes with a cost-benefit perspective for typical light-metal applications in the automotive industry.

  12. Lightweight Exoskeletons with Controllable Actuators

    NASA Technical Reports Server (NTRS)

    Bar-Cohen, Yoseph; Mavrodis, Constantinos; Melli-Huber, Juan; Fisch, Avi (Alan)

    2004-01-01

    A proposed class of lightweight exoskeletal electromechanical systems would include electrically controllable actuators that would generate torques and forces that, depending on specific applications, would resist and/or assist wearers movements. The proposed systems would be successors to relatively heavy, bulky, and less capable human-strength-amplifying exoskeletal electromechanical systems that have been subjects of research during the past four decades. The proposed systems could be useful in diverse applications in which there are needs for systems that could be donned or doffed easily, that would exert little effect when idle, and that could be activated on demand: examples of such applications include (1) providing controlled movement and/or resistance to movement for physical exercise and (2) augmenting wearers strengths in the performance of military, law-enforcement, and industrial tasks. An exoskeleton according to the proposal would include adjustable lightweight graphite/epoxy struts and would be attached to the wearer's body by belts made of hook-and-pile material. At selected rotary and linear joints, the exoskeleton would be fitted, variously, with lightweight, low-power-consumption rotary and linear brakes, clutches, and motors. The exoskeleton would also be equipped with electronic circuitry for monitoring, control, and possibly communication with external electronic circuits that would perform additional monitoring and control functions.

  13. Lightweight, self-ballasting photovoltaic roofing assembly

    DOEpatents

    Dinwoodie, Thomas L.

    2006-02-28

    A photovoltaic roofing assembly comprises a roofing membrane (102), a plurality of photovoltaic modules (104, 106, 108) disposed as a layer on top of the roofing membrane (102), and a plurality of pre-formed spacers, pedestals or supports (112, 114, 116, 118, 120, 122) which are respectively disposed below the plurality of photovoltaic modules (104, 106, 108) and integral therewith, or fixed thereto. Spacers (112, 114, 116, 118, 120, 122) are disposed on top of roofing membrane (102). Membrane (102) is supported on conventional roof framing, and attached thereto by conventional methods. In an alternative embodiment, the roofing assembly may have insulation block (322) below the spacers (314, 314', 315, 315'). The geometry of the pre-formed spacers (112, 114, 116, 118, 120, 122, 314, 314', 315, 315') is such that wind tunnel testing has shown its maximum effectiveness in reducing net forces of wind uplift on the overall assembly. Such construction results in a simple, lightweight, self-ballasting, readily assembled roofing assembly which resists the forces of wind uplift using no roofing penetrations.

  14. Lightweight, self-ballasting photovoltaic roofing assembly

    DOEpatents

    Dinwoodie, Thomas L.

    1998-01-01

    A photovoltaic roofing assembly comprises a roofing membrane (102), a plurality of photovoltaic modules (104, 106, 108) disposed as a layer on top of the roofing membrane (102), and a plurality of pre-formed spacers, pedestals or supports (112, 114, 116, 118, 120, 122) which are respectively disposed below the plurality of photovoltaic modules (104, 106, 108) and integral therewith, or fixed thereto. Spacers (112, 114, 116, 118, 120, 122) are disposed on top of roofing membrane (102). Membrane (102) is supported on conventional roof framing, and attached thereto by conventional methods. In an alternative embodiment, the roofing assembly may have insulation block (322) below the spacers (314, 314', 315, 315'). The geometry of the preformed spacers (112, 114, 116, 118, 120, 122, 314, 314', 315, 315') is such that wind tunnel testing has shown its maximum effectiveness in reducing net forces of wind uplift on the overall assembly. Such construction results in a simple, lightweight, self-ballasting, readily assembled roofing assembly which resists the forces of wind uplift using no roofing penetrations.

  15. Lightweight, self-ballasting photovoltaic roofing assembly

    DOEpatents

    Dinwoodie, T.L.

    1998-05-05

    A photovoltaic roofing assembly comprises a roofing membrane (102), a plurality of photovoltaic modules (104, 106, 108) disposed as a layer on top of the roofing membrane (102), and a plurality of pre-formed spacers, pedestals or supports (112, 114, 116, 118, 120, 122) which are respectively disposed below the plurality of photovoltaic modules (104, 106, 108) and integral therewith, or fixed thereto. Spacers (112, 114, 116, 118, 120, 122) are disposed on top of roofing membrane (102). Membrane (102) is supported on conventional roof framing, and attached thereto by conventional methods. In an alternative embodiment, the roofing assembly may have insulation block (322) below the spacers (314, 314', 315, 315'). The geometry of the preformed spacers (112, 114, 116, 118, 120, 122, 314, 314', 315, 315') is such that wind tunnel testing has shown its maximum effectiveness in reducing net forces of wind uplift on the overall assembly. Such construction results in a simple, lightweight, self-ballasting, readily assembled roofing assembly which resists the forces of wind uplift using no roofing penetrations.

  16. Computed tomography in trauma

    SciTech Connect

    Toombs, B.D.; Sandler, C.M.

    1987-01-01

    This book begins with a chapter dealing with the epidemiology and mechanisms of trauma. Trauma accounts for more lives lost in the United States than cancer and heart disease. The fact that 30%-40% of trauma-related deaths are caused by improper or delayed diagnoses or treatment emphasizes the importance of rapid and accurate methods to establish a diagnosis. Acute thoracic, abdominal, and pelvic trauma and their complications are discussed. A chapter on high-resolution CT of spinal and facial trauma and the role of three-dimensional reconstruction images is presented.

  17. Trauma system development.

    PubMed

    Lendrum, R A; Lockey, D J

    2013-01-01

    The word 'trauma' describes the disease entity resulting from physical injury. Trauma is one of the leading causes of death worldwide and deaths due to injury look set to increase. As early as the 1970s, it became evident that centralisation of resources and expertise could reduce the mortality rate from serious injury and that organisation of trauma care delivery into formal systems could improve outcome further. Internationally, trauma systems have evolved in various forms, with widespread reports of mortality and functional outcome benefits when major trauma management is delivered in this way. The management of major trauma in England is currently undergoing significant change. The London Trauma System began operating in April 2010 and others throughout England became operational this year. Similar systems exist internationally and continue to be developed. Anaesthetists have been and continue to be involved with all levels of trauma care delivery, from the provision of pre-hospital trauma and retrieval teams, through to chronic pain management and rehabilitation of patients back into society. This review examines the international development of major trauma care delivery and the components of a modern trauma system. PMID:23210554

  18. Making Lightweight Structures By Vapor Deposition

    NASA Technical Reports Server (NTRS)

    Goela, Jitendra S.; Pickering, Michael A.; Taylor, Raymond L.

    1990-01-01

    Technique developed for fabrication of stiff, strong, lightweight structures of silicon carbide or other materials by any of several deposition processes. Structures made by method can have complicated shapes. Ability to manufacture complex shape from pure deposited SiC useful and leads to new products in several fields. These lightweight structures used as backup structures for optical components, as structural components in automotive, aerospace, and outer space applications, and as lightweight parts of furniture for outer space.

  19. Lightweight Seat Lever Operation Characteristics

    NASA Technical Reports Server (NTRS)

    Rajulu, Sudhakar

    1999-01-01

    In 1999, a Shuttle crew member was unable to operate the backrest lever for the lightweight seat in microgravity. It is essential that crew members can adjust this backrest lever, which is titled forward during launch and then moved backward upon reaching orbit. This adjustment is needed to cushion the crew members during an inadvertent crash landing situation. JSCs Anthropometry and Biomechanics Facility (ABF) performed an evaluation of the seat controls and provided recommendations on whether the seat lever positions and operations should be modified. The original Shuttle seats were replaced with new lightweight seats whose controls were moved, with one control at the front and the other at the back. The ABF designed a 12-person experiment to investigate the amount of pull force exerted by suited subjects, when controls were placed in the front and back of the lightweight seat. Each subject was asked to perform the pull test at least three times for each combination of lever position and suit pressure conditions. The results showed that, in general, the subjects were able to pull on the lever at the back position with only about half the amount of force that they were able to exert on the lever at the front position. In addition, the results also showed that subjects wearing the pressurized suit were unable to reach the seat lever when it was located at the back. The pull forces on the front lever diminished about 50% when subjects wore pressurized suits. Based on these results from this study, it was recommended that the levers should not be located in the back position. Further investigation is needed to determine whether the levers at the front of the seat could be modified or adjusted to increase the leverage for crew members wearing pressurized launch/escape suits.

  20. Lightweight Restraint For Coupling Flanges

    NASA Technical Reports Server (NTRS)

    Whitaker, Willie D.

    1989-01-01

    End flanges of flexible coupling system restrained against excessive rotation or axial separation by inexpensive, lightweight mechanism based on cables and pulleys. Restraining mechanism adapted to cable, duct, hose, or passageway couplings between vehicles, or to other applications in which angular and positional misalignments must be restricted to moderate specified values. Total misalignment of two end flanges limited to amount of slack available in cable-and-pulley mechanism. When cable taut, further axial separation of flange centers restrained, but small tilts accommodated by running of cable through pulleys.

  1. Lightweight Boom For Rescue Helicopter

    NASA Technical Reports Server (NTRS)

    Haslim, Leonard A.

    1993-01-01

    Telescoping boom and associated mechanisms attached to helicopter aid rescue operations by extending lifeline beyond sweep of main rotor. Pilot observes rescuee and control position of helicopter more effectively than if rescuee directly below and hidden from pilot's view. Rescuee outside downdraft of rotor, which is often powerful enough to blow away or submerge someone in water. Used for marine or land operations. Boom thin and lightweight because it need not support weight of rescuee. Lifeline pulls away from boom after secured around rescuee, who is lifted directly into cabin by winch. Potential application for in situ erection of telescopic space structures.

  2. Lightweight, Thermally Conductive Composite Material

    NASA Technical Reports Server (NTRS)

    Sharp, G. Richard; Loftin, Timothy A.

    1990-01-01

    Aluminum reinforced with carbon fibers superior to copper in some respects. Lightweight composite material has high thermal conductivity. Consists of aluminum matrix containing graphite fibers, all oriented in same direction. Available as sheets, tubes, and bars. Thermal conductivity of composite along fibers rises above that of pure copper over substantial range of temperatures. Graphite/aluminum composite useful in variety of heat-transfer applications in which reduction of weight critical. Used to conduct heat in high-density, high-speed integrated-circuit packages for computers and in base plates for electronic equipment. Also used to carry heat away from leading edges of wings in high-speed airplanes.

  3. Manufacturing Precise, Lightweight Paraboloidal Mirrors

    NASA Technical Reports Server (NTRS)

    Hermann, Frederick Thomas

    2006-01-01

    A process for fabricating a precise, diffraction- limited, ultra-lightweight, composite- material (matrix/fiber) paraboloidal telescope mirror has been devised. Unlike the traditional process of fabrication of heavier glass-based mirrors, this process involves a minimum of manual steps and subjective judgment. Instead, this process involves objectively controllable, repeatable steps; hence, this process is better suited for mass production. Other processes that have been investigated for fabrication of precise composite-material lightweight mirrors have resulted in print-through of fiber patterns onto reflecting surfaces, and have not provided adequate structural support for maintenance of stable, diffraction-limited surface figures. In contrast, this process does not result in print-through of the fiber pattern onto the reflecting surface and does provide a lightweight, rigid structure capable of maintaining a diffraction-limited surface figure in the face of changing temperature, humidity, and air pressure. The process consists mainly of the following steps: 1. A precise glass mandrel is fabricated by conventional optical grinding and polishing. 2. The mandrel is coated with a release agent and covered with layers of a carbon- fiber composite material. 3. The outer surface of the outer layer of the carbon-fiber composite material is coated with a surfactant chosen to provide for the proper flow of an epoxy resin to be applied subsequently. 4. The mandrel as thus covered is mounted on a temperature-controlled spin table. 5. The table is heated to a suitable temperature and spun at a suitable speed as the epoxy resin is poured onto the coated carbon-fiber composite material. 6. The surface figure of the optic is monitored and adjusted by use of traditional Ronchi, Focault, and interferometric optical measurement techniques while the speed of rotation and the temperature are adjusted to obtain the desired figure. The proper selection of surfactant, speed or rotation

  4. Small and lightweight power amplifiers

    NASA Astrophysics Data System (ADS)

    Shams, Qamar A.; Barnes, Kevin N.; Fox, Robert L.; Moses, Robert W.; Bryant, Robert G.; Robinson, Paul C.; Shirvani, Mir

    2002-07-01

    The control of u wanted structural vibration is implicit in most of NASA's programs. Currently several approaches to control vibrations in large, lightweight, deployable structures and twin tail aircraft at high angles of attack are being evaluated. The Air Force has been examining a vertical tail buffet load alleviation system that can be integrated onboard an F/A-18 and flown. Previous wind tunnel and full-scale ground tests using distributed actuators have shown that the concept works; however, there is insufficient rom available onboard an F/A-18 to store current state-of- the-art system components such as amplifiers, DC-to-DC converter and a computer for performing vibration suppression. Sensor processing, power electronics, DC-to-DC converters, and control electronics that may be collocated with distributed actuators, are particularly desirable. Such electronic system would obviate the need for complex, centralized, control processing and power distribution components that will eliminate the weight associated with lengthy wiring and cabling networks. Several small and lightweight power amplifiers ranging from 300V pp to 650V pp have been designed using off the shelf components for different applications. In this paper, the design and testing of these amplifiers will be presented under various electrical loads.

  5. Caring for Trauma Survivors.

    PubMed

    Antai-Otong, Deborah

    2016-06-01

    Although trauma exposure is common, few people develop acute and chronic psychiatric disorders. Those who develop posttraumatic stress disorder likely have coexisting psychiatric and physical disorders. Psychiatric nurses must be knowledgeable about trauma responses, implement evidence-based approaches to conduct assessments, and create safe environments for patients. Most researchers assert that trauma-focused cognitive-behavioral approaches demonstrate the most efficacious treatment outcomes. Integrated approaches, offer promising treatment options. This article provides an overview of clinical factors necessary to help the trauma survivor begin the process of healing and recovery and attain an optimal level of functioning. PMID:27229285

  6. Blunt thoracic trauma.

    PubMed

    Weyant, Michael J; Fullerton, David A

    2008-01-01

    Blunt thoracic trauma represents a significant portion of trauma admissions to hospitals in the United States. These injuries are encountered by physicians in many specialities such as emergency medicine, pediatrics, general surgery and thoracic surgery. Accurate diagnosis and treatment improves the chances of favorable outcomes and it is desirable for all treating physicians to have current knowledge of all aspects of blunt thoracic trauma. Cardiothoracic surgeons often treat the most severe forms of blunt thoracic injuries and we review the aspects of blunt thoracic trauma that are pertinent to the practicing cardiothoracic surgeon. PMID:18420123

  7. High-flexibility, noncollapsing lightweight hose

    DOEpatents

    Williams, D.A.

    1993-04-20

    A high-flexibility, noncollapsing, lightweight, large-bore, wire-reinforced hose is inside fiber-reinforced PVC tubing that is flexible, lightweight, and abrasion resistant. It provides a strong, kink- and collapse-free conduit for moving large quantities of dangerous fluids, e.g., removing radioactive waste water or processing chemicals.

  8. High-flexibility, noncollapsing lightweight hose

    DOEpatents

    Williams, David A.

    1993-01-01

    A high-flexibility, noncollapsing, lightweight, large-bore, wire-reinforced hose is inside fiber-reinforced PVC tubing that is flexible, lightweight, and abrasion resistant. It provides a strong, kink- and collapse-free conduit for moving large quantities of dangerous fluids, e.g., removing radioactive waste water or processing chemicals.

  9. Advantages and challenges of dissimilar materials in automotive lightweight construction

    NASA Astrophysics Data System (ADS)

    Weberpals, Jan-Philipp; Schmidt, Philipp A.; Böhm, Daniel; Müller, Steffen

    2015-03-01

    The core of future automotive lightweight materials is the joining technology of various material mixes. The type of joining will be essential, particularly in electrified propulsion systems, especially as an improved electrical energy transmission leads to a higher total efficiency of the vehicle. The most evident parts to start the optimization process are the traction battery, the electrical performance modules and the engines. Consequently aluminum plays a very central role for lightweight construction applications. However, the physical-technical requirements of components often require the combination with other materials. Thus the joining of mixed material connections is an essential key technology for many of the current developments, for example in the areas E-Mobility, solar energy and lightweight construction. Due to these advantages mixed material joints are already established in the automotive industry and laser beam remote welding is now a focus technology for mixed material connections. The secret of the laser welding process with mixed materials lies within the different areas of the melting phase diagram depending on the mixing ratio and the cooling down rate. According to that areas with unwanted, prim, intermetallic phases arise in the fusion zone. Therefore, laser welding of mixed material connections can currently only be used with additional filler in the automotive industry.

  10. Fracture properties of lightweight concrete

    SciTech Connect

    Chang, T.P.; Shieh, M.M.

    1996-02-01

    This study presents the experimental results of fracture properties of concrete incorporating two kinds of domestic lightweight aggregate (LWA) manufactured through either a cold-bonding or a sintering process. The cold-bonded aggregates were mainly made of pulverized fly-ash through a cold-pelletization process at ambient temperature, while the sintered aggregates were made of clay and shale expanded by heat at a temperature near 1,200 C. Experimental results show that the 28-day compressive strengths of {phi} 100 x 200 mm cylindrical concrete specimen made of those LWAs range from 30.1 (sintered) to 33.9 MPa (cold-bonded). By means of size effect law, it is found that the fracture energies, G{sub f}, were 34.42 N/m (sintered) and 37.2 N/m (cold-bonded), respectively.

  11. Development of a lightweight nickel electrode

    NASA Technical Reports Server (NTRS)

    Britton, D. L.; Reid, M. A.

    1984-01-01

    Nickel electrodes made using lightweight plastic plaque are about half the weight of electrodes made from state of the art sintered nickel plaque. This weight reduction would result in a significant improvement in the energy density of batteries using nickel electrodes (nickel hydrogen, nickel cadmium and nickel zinc). These lightweight electrodes are suitably conductive and yield comparable capacities (as high as 0.25 AH/gm (0.048 AH/sq cm)) after formation. These lightweight electrodes also show excellent discharge performance at high rates.

  12. Imaging of head trauma.

    PubMed

    Rincon, Sandra; Gupta, Rajiv; Ptak, Thomas

    2016-01-01

    Imaging is an indispensable part of the initial assessment and subsequent management of patients with head trauma. Initially, it is important for diagnosing the extent of injury and the prompt recognition of treatable injuries to reduce mortality. Subsequently, imaging is useful in following the sequelae of trauma. In this chapter, we review indications for neuroimaging and typical computed tomography (CT) and magnetic resonance imaging (MRI) protocols used in the evaluation of a patient with head trauma. We review the role of CT), the imaging modality of choice in the acute setting, and the role of MRI in the evaluation of patients with head trauma. We describe an organized and consistent approach to the interpretation of imaging of these patients. Important topics in head trauma, including fundamental concepts related to skull fractures, intracranial hemorrhage, parenchymal injury, penetrating trauma, cerebrovascular injuries, and secondary effects of trauma, are reviewed. The chapter concludes with advanced neuroimaging techniques for the evaluation of traumatic brain injury, including use of diffusion tensor imaging (DTI), functional MRI (fMRI), and MR spectroscopy (MRS), techniques which are still under development. PMID:27432678

  13. The coagulopathy of trauma.

    PubMed

    Maegele, M

    2014-04-01

    Trauma is a leading cause of death, with uncontrolled hemorrhage and exsanguination being the primary causes of preventable deaths during the first 24 h following trauma. Death usually occurs quickly, typically within the first 6 h after injury. One out of four patients arriving at the Emergency Department after trauma is already in hemodynamic and hemostatic depletion. This early manifestation of hemostatic depletion is referred to as the coagulopathy of trauma, which may distinguished as: (i) acute traumatic coagulopathy (ATC) and (ii) iatrogenic coagulopathy (IC). The principle drivers of ATC have been characterized by tissue trauma, inflammation, hypoperfusion/shock, and the acute activation of the neurohumoral system. Hypoperfusion leads to an activation of protein C with cleavage of activated factors V and VIII and the inhibition of plasminogen activator inhibitor-1 (PAI-1), with subsequent fibrinolysis. Endothelial damage and activation results in Weibel-Palade body degradation and glycocalyx shedding associated with autoheparinization. In contrast, there is an IC which occurs secondary to uncritical volume therapy, leading to acidosis, hypothermia, and hemodilution. This coagulopathy may, then, be an integral part of the "vicious cycle" when combined with acidosis and hypothermia. The awareness of the specific pathophysiology and of the principle drivers underlying the coagulopathy of trauma by the treating physician is paramount. It has been shown that early recognition prompted by appropriate and aggressive management can correct coagulopathy, control bleeding, reduce blood product use, and improve outcome in severely injured patients. This paper summarizes: (i) the current concepts of the pathogenesis of the coagulopathy of trauma, including ATC and IC, (ii) the current strategies available for the early identification of patients at risk for coagulopathy and ongoing life-threatening hemorrhage after trauma, and (iii) the current and updated European

  14. Trauma and Mobile Radiography

    SciTech Connect

    Drafke, M.W.

    1989-01-01

    Trauma and Mobile Radiography focuses on the radiography of trauma patients and of patients confined to bed. This book offers students a foundation in the skills they need to produce quality radiograms without causing additional injury or pain to the patient. Features of this new book include: coverage of the basics of radiography and patient care, including monitoring of heavily sedated, immobile, and accident patients. Information on the injuries associated with certain types of accidents, and methods for dealing with these problems. Detailed explanation of the positioning of each anatomical area. A Quick Reference Card with information on evaluating, monitoring and radiographing trauma patients.

  15. FY 2011 Progress Report for Lightweighting Materials

    SciTech Connect

    2012-02-28

    The FY 2011 Progress Report for Lightweighting Materials focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce light and heavy duty vehicle weight without compromising other attributes such as safety, performance, recyclability, and cost.

  16. Lightweight structural columns. [space erectable trusses

    NASA Technical Reports Server (NTRS)

    Bush, H. G. (Inventor)

    1981-01-01

    Lightweight half-lengths of columns for truss structures are described. The columns are adapted for nestable storage and transport to facilitate fabrication of large area truss structures at a remote site and particularly adaptable for space applications.

  17. Lightweight Composite Materials for Heavy Duty Vehicles

    SciTech Connect

    Pruez, Jacky; Shoukry, Samir; Williams, Gergis; Shoukry, Mark

    2013-08-31

    The main objective of this project is to develop, analyze and validate data, methodologies and tools that support widespread applications of automotive lightweighting technologies. Two underlying principles are guiding the research efforts towards this objective: • Seamless integration between the lightweight materials selected for certain vehicle systems, cost-effective methods for their design and manufacturing, and practical means to enhance their durability while reducing their Life-Cycle-Costs (LCC). • Smooth migration of the experience and findings accumulated so far at WVU in the areas of designing with lightweight materials, innovative joining concepts and durability predictions, from applications to the area of weight savings for heavy vehicle systems and hydrogen storage tanks, to lightweighting applications of selected systems or assemblies in light–duty vehicles.

  18. Trauma program development.

    PubMed

    Althausen, Peter L

    2014-07-01

    The development of a strong trauma program is clearly one of the most important facets of successful business development. Several recent publications have demonstrated that well run trauma services can generate significant profits for both the hospital and the surgeons involved. There are many aspects to this task that require constant attention and insight. Top notch patient care, efficiency, and cost-effective resource utilization are all important components that must be addressed while providing adequate physician compensation within the bounds of hospital financial constraints and the encompassing legal issues. Each situation is different but many of the components are universal. This chapter addresses all aspects of trauma program development to provide the graduating fellow with the tools to create a new trauma program or improve an existing program in order to provide the best patient care while optimizing financial reward and improving care efficiency. PMID:24918830

  19. Basic trauma life support.

    PubMed

    Werman, H A; Nelson, R N; Campbell, J E; Fowler, R L; Gandy, P

    1987-11-01

    The impact of traumatic injuries on modern society in terms of morbidity, mortality, and economic cost is enormous. Studies have shown that both advanced life support skills and rapid stabilization and transport of the trauma victim have a beneficial effect on the patient's ultimate outcome. The Basic Trauma Life Support (BTLS) course was designed to provide pre-hospital care providers with the skills necessary to provide a thorough assessment, initial resuscitation, and rapid transportation of the trauma victim. Early studies suggest that the material is easily learned by prehospital care providers and that the on-scene time for trauma cases is reduced following training in BTLS. More widespread training in BTLS may have a significant effect on the mortality and morbidity associated with traumatic injuries. PMID:3662184

  20. Imaging of Abusive Trauma.

    PubMed

    Shekdar, Karuna

    2016-06-01

    "Shaken baby syndrome" is a term often used by the physicians and public to describe abusive trauma inflicted on infants and young children. Advances in the understanding of the mechanisms and the associated clinical spectrum of injury has lead us to modify our terminology and address it as "abusive trauma" (AT). Pediatric abusive head trauma is defined as an injury to the skull or intracranial contents of an infant or a young child (< 5 y age) due to inflicted blunt impact and/or violent shaking. This chapter focuses on the imaging aspects of childhood abusive trauma along with a brief description of the mechanism and pathophysiology of abusive injury. The diagnosis of AT is not always obvious, and abusive injuries in many infants may remain unrecognized. Pediatricians should be cognizant of AT since pediatricians play a crucial role in the diagnosis, management and prevention of AT. PMID:26882906

  1. Imaging in orbital trauma

    PubMed Central

    Lin, Ken Y.; Ngai, Philip; Echegoyen, Julio C.; Tao, Jeremiah P.

    2012-01-01

    Orbital trauma is one of the most common reasons for ophthalmology specialty consultation in the emergency department setting. We survey the literature from 1990 to present to describe the role of computed tomography (CT), magnetic resonance imaging (MRI) and their associated angiography in some of the most commonly encountered orbital trauma conditions. CT orbit can often detect certain types of foreign bodies, lens dislocation, ruptured globe, choroidal or retinal detachments, or cavernous sinus thrombosis and thus complement a bedside ophthalmic exam that can sometimes be limited in the setting of trauma. CT remains the workhorse for acute orbital trauma owing to its rapidity and ability to delineate bony abnormalities; however MRI remains an important modality in special circumstances such as soft tissue assessment or with organic foreign bodies. PMID:23961028

  2. Lightweight, Self-Deployable Wheels

    NASA Technical Reports Server (NTRS)

    Chmielewski, Artur; Sokolowski, Witold; Rand, Peter

    2003-01-01

    Ultra-lightweight, self-deployable wheels made of polymer foams have been demonstrated. These wheels are an addition to the roster of cold hibernated elastic memory (CHEM) structural applications. Intended originally for use on nanorovers (very small planetary-exploration robotic vehicles), CHEM wheels could also be used for many commercial applications, such as in toys. The CHEM concept was reported in "Cold Hibernated Elastic Memory (CHEM) Expandable Structures" (NPO-20394), NASA Tech Briefs, Vol. 23, No. 2 (February 1999), page 56. To recapitulate: A CHEM structure is fabricated from a shape-memory polymer (SMP) foam. The structure is compressed to a very small volume while in its rubbery state above its glass-transition temperature (Tg). Once compressed, the structure can be cooled below Tg to its glassy state. As long as the temperature remains

  3. Lightweight extendable and retractable pole

    DOEpatents

    Warren, J.L.; Brandt, J.E.

    1994-08-02

    A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole. 18 figs.

  4. Lightweight extendable and retractable pole

    DOEpatents

    Warren, John L.; Brandt, James E.

    1994-01-01

    A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole.

  5. Construction of Prototype Lightweight Mirrors

    NASA Technical Reports Server (NTRS)

    Robinson, William G.

    1997-01-01

    This contract and the work described was in support of a Seven Segment Demonstrator (SSD) and demonstration of a different technology for construction of lightweight mirrors. The objectives of the SSD were to demonstrate functionality and performance of a seven segment prototype array of hexagonal mirrors and supporting electromechanical components which address design issues critical to space optics deployed in large space based telescopes for astronomy and for optics used in spaced based optical communications systems. The SSD was intended to demonstrate technologies which can support the following capabilities; Transportation in dense packaging to existing launcher payload envelopes, then deployable on orbit to form space telescope with large aperture. Provide very large (less than 10 meters) primary reflectors of low mass and cost. Demonstrate the capability to form a segmented primary or quaternary mirror into a quasi-continuous surface with individual subapertures phased so that near diffraction limited imaging in the visible wavelength region is achieved. Continuous compensation of optical wavefront due to perturbations caused by imperfections, natural disturbances, and equipment induced vibrations/deflections to provide near diffraction limited imaging performance in the visible wavelength region. Demonstrate the feasibility of fabricating such systems with reduced mass and cost compared to past approaches. While the SSD could not be expected to satisfy all of the above capabilities, the intent was to start identifying and understanding new technologies that might be applicable to these goals.

  6. Lightweight Ceramics for Aeroacoustic Applications

    NASA Technical Reports Server (NTRS)

    Kwan, H. W.; Spamer, G. T.; Yu, J.; Yasukawa, B.

    1997-01-01

    The use of a HTP (High Temperature Performance) ceramic foam for aeroacoustic applications is investigated. HTP ceramic foam is a composition of silica and alumina fibers developed by LMMS. This foam is a lightweight high-temperature fibrous bulk material with small pore size, ultra high porosity, and good strength. It can be used as a broadband noise absorber at both room and high temperature (up to 1800 F). The investigation included an acoustic assessment as well as material development, and environmental and structural evaluations. The results show that the HTP ceramic foam provides good broadband noise absorbing capability and adequate strength when incorporating the HTP ceramic foam system into a honeycomb sandwich structure. On the other hand, the material is sensitive to Skydrol and requires further improvements. Good progress has been made in the impedance model development. A relationship between HTP foam density, flow resistance, and tortuosity will be established in the near future. Additional effort is needed to investigate the coupling effects between face sheet and HTP foam material.

  7. Lightweight bladder lined pressure vessels

    DOEpatents

    Mitlitsky, F.; Myers, B.; Magnotta, F.

    1998-08-25

    A lightweight, low permeability liner is described for graphite epoxy composite compressed gas storage vessels. The liner is composed of polymers that may or may not be coated with a thin layer of a low permeability material, such as silver, gold, or aluminum, deposited on a thin polymeric layer or substrate which is formed into a closed bladder using tori spherical or near tori spherical end caps, with or without bosses therein, about which a high strength to weight material, such as graphite epoxy composite shell, is formed to withstand the storage pressure forces. The polymeric substrate may be laminated on one or both sides with additional layers of polymeric film. The liner may be formed to a desired configuration using a dissolvable mandrel or by inflation techniques and the edges of the film sealed by heat sealing. The liner may be utilized in most any type of gas storage system, and is particularly applicable for hydrogen, gas mixtures, and oxygen used for vehicles, fuel cells or regenerative fuel cell applications, high altitude solar powered aircraft, hybrid energy storage/propulsion systems, and lunar/Mars space applications, and other applications requiring high cycle life. 19 figs.

  8. Lightweight bladder lined pressure vessels

    DOEpatents

    Mitlitsky, Fred; Myers, Blake; Magnotta, Frank

    1998-01-01

    A lightweight, low permeability liner for graphite epoxy composite compressed gas storage vessels. The liner is composed of polymers that may or may not be coated with a thin layer of a low permeability material, such as silver, gold, or aluminum, deposited on a thin polymeric layer or substrate which is formed into a closed bladder using torispherical or near torispherical end caps, with or without bosses therein, about which a high strength to weight material, such as graphite epoxy composite shell, is formed to withstand the storage pressure forces. The polymeric substrate may be laminated on one or both sides with additional layers of polymeric film. The liner may be formed to a desired configuration using a dissolvable mandrel or by inflation techniques and the edges of the film seamed by heat sealing. The liner may be utilized in most any type of gas storage system, and is particularly applicable for hydrogen, gas mixtures, and oxygen used for vehicles, fuel cells or regenerative fuel cell applications, high altitude solar powered aircraft, hybrid energy storage/propulsion systems, and lunar/Mars space applications, and other applications requiring high cycle life.

  9. Energy-Absorbing, Lightweight Wheels

    NASA Technical Reports Server (NTRS)

    Waydo, Peter

    2003-01-01

    Improved energy-absorbing wheels are under development for use on special-purpose vehicles that must traverse rough terrain under conditions (e.g., extreme cold) in which rubber pneumatic tires would fail. The designs of these wheels differ from those of prior non-pneumatic energy-absorbing wheels in ways that result in lighter weights and more effective reduction of stresses generated by ground/wheel contact forces. These wheels could be made of metals and/or composite materials to withstand the expected extreme operating conditions. As shown in the figure, a wheel according to this concept would include an isogrid tire connected to a hub via spring rods. The isogrid tire would be a stiff, lightweight structure typically made of aluminum. The isogrid aspect of the structure would both impart stiffness and act as a traction surface. The hub would be a thin-walled body of revolution having a simple or compound conical or other shape chosen for structural efficiency. The spring rods would absorb energy and partially isolate the hub and the supported vehicle from impact loads. The general spring-rod configuration shown in the figure was chosen because it would distribute contact and impact loads nearly evenly around the periphery of the hub, thereby helping to protect the hub against damage that would otherwise be caused by large loads concentrated onto small portions of the hub.

  10. Small, Lightweight, Collapsible Glove Box

    NASA Technical Reports Server (NTRS)

    James, Jerry

    2009-01-01

    A small, lightweight, collapsible glove box enables its user to perform small experiments and other tasks. Originally intended for use aboard a space shuttle or the International Space Station (ISS), this glove box could also be attractive for use on Earth in settings in which work space or storage space is severely limited and, possibly, in which it is desirable to minimize weight. The development of this glove box was prompted by the findings that in the original space-shuttle or ISS setting, (1) it was necessary to perform small experiments in a large general-purpose work station, so that, in effect, they occupied excessive space; and it took excessive amounts of time to set up small experiments. The design of the glove box reflects the need to minimize the space occupied by experiments and the time needed to set up experiments, plus the requirement to limit the launch weight of the box and the space needed to store the box during transport into orbit. To prepare the glove box for use, the astronaut or other user has merely to insert hands through the two fabric glove ports in the side walls of the box and move two hinges to a locking vertical position (see figure). The user could do this while seated with the glove box on the user fs lap. When stowed, the glove box is flat and has approximately the thickness of two pieces of 8-in. (.20 cm) polycarbonate.

  11. Nonventing, Regenerable, Lightweight Heat Absorber

    NASA Technical Reports Server (NTRS)

    Izenson, Michael G.; Chen, Weibo

    2008-01-01

    A lightweight, regenerable heat absorber (RHA), developed for rejecting metabolic heat from a space suit, may also be useful on Earth for short-term cooling of heavy protective garments. Unlike prior space-suit-cooling systems, a system that includes this RHA does not vent water. The closed system contains water reservoirs, tubes through which water is circulated to absorb heat, an evaporator, and an absorber/radiator. The radiator includes a solution of LiCl contained in a porous material in titanium tubes. The evaporator cools water that circulates through a liquid-cooled garment. Water vapor produced in the evaporator enters the radiator tubes where it is absorbed into the LiCl solution, releasing heat. Much of the heat of absorption is rejected to the environment via the radiator. After use, the RHA is regenerated by heating it to a temperature of 100 C for about 2 hours to drive the absorbed water back to the evaporator. A system including a prototype of the RHA was found to be capable of maintaining a temperature of 20 C while removing heat at a rate of 200 W for 6 hours.

  12. Trauma registry reengineered.

    PubMed

    Wargo, Christina; Bolig, Nicole; Hixson, Heather; McWilliams, Nate; Rummerfield, Heather; Stratton, Elaine; Woodruff, Tracy

    2014-01-01

    A successful trauma registry balances accuracy of abstraction and timeliness of case submissions to achieve quality performance. Staffing to achieve quality performance is a challenge at times based on competitive institutional need. The aim of this performance improvement timing study was to identify trauma registry job responsibilities and redesign the responsibilities to create increased abstraction time and maintain accuracy of data abstraction. The outcome is measured by case submission rates with existing staffing and interrater reliability outcomes. PMID:25397337

  13. Penetrating extremity trauma.

    PubMed

    Ivatury, Rao R; Anand, Rahul; Ordonez, Carlos

    2015-06-01

    Penetrating extremity trauma (PET) usually becomes less important when present along with multiple truncal injuries. The middle eastern wars documented the terrible mortality and morbidity resulting from PET. Even in civilian trauma, PET can lead to significant morbidity and mortality. There are now well-established principles in the evaluation and management of vascular, bony, soft tissue, and neurologic lesions that will lead to a reduction of the poor outcomes. This review will summarize some of these recent concepts. PMID:25413177

  14. Noninvasive ventilation in trauma.

    PubMed

    Karcz, Marcin K; Papadakos, Peter J

    2015-02-01

    Trauma patients are a diverse population with heterogeneous needs for ventilatory support. This requirement depends mainly on the severity of their ventilatory dysfunction, degree of deterioration in gaseous exchange, any associated injuries, and the individual feasibility of potentially using a noninvasive ventilation approach. Noninvasive ventilation may reduce the need to intubate patients with trauma-related hypoxemia. It is well-known that these patients are at increased risk to develop hypoxemic respiratory failure which may or may not be associated with hypercapnia. Hypoxemia in these patients is due to ventilation perfusion mismatching and right to left shunt because of lung contusion, atelectasis, an inability to clear secretions as well as pneumothorax and/or hemothorax, all of which are common in trauma patients. Noninvasive ventilation has been tried in these patients in order to avoid the complications related to endotracheal intubation, mainly ventilator-associated pneumonia. The potential usefulness of noninvasive ventilation in the ventilatory management of trauma patients, though reported in various studies, has not been sufficiently investigated on a large scale. According to the British Thoracic Society guidelines, the indications and efficacy of noninvasive ventilation treatment in respiratory distress induced by trauma have thus far been inconsistent and merely received a low grade recommendation. In this review paper, we analyse and compare the results of various studies in which noninvasive ventilation was applied and discuss the role and efficacy of this ventilator modality in trauma. PMID:25685722

  15. Airway management in trauma.

    PubMed

    Langeron, O; Birenbaum, A; Amour, J

    2009-05-01

    Maintenance of a patent and prevention of aspiration are essential for the management of the trauma patient, that requires experienced physicians in airway control techniques. Difficulties of the airway control in the trauma setting are increased by the vital failures, the risk of aspiration, the potential cervical spine injury, the combative patient, and the obvious risk of difficult tracheal intubation related to specific injury related to the trauma. Endotracheal intubation remains the gold standard in trauma patient airway management and should be performed via the oral route with a rapid sequence induction and a manual in-line stabilization maneuver, to decrease the risks previously mentioned. Different techniques to control the airway in trauma patients are presented: improvement of the laryngoscopic vision, lighted stylet tracheal intubation, retrograde technique for orotracheal intubation, the laryngeal mask and the intubating laryngeal mask airways, the combitube and cricothyroidotomy. Management of the airway in trauma patients requires regular training in these techniques and the knowledge of complementary techniques allowing tracheal intubation or oxygenation to overcome difficult intubation and to prevent major complications as hypoxemia and aspiration. PMID:19412149

  16. MAOA Genotype, Childhood Trauma and Subclinical Atherosclerosis: A Twin Study

    PubMed Central

    Zhao, Jinying; Bremner, James D.; Goldberg, Jack; Quyyumi, Arshed A.; Vaccarino, Viola

    2013-01-01

    Objective A functional promoter polymorphism in the MAOA gene has been implicated in neuropsychiatric disorders and also moderates the association between early life stress and mental disorders, which often co-occur with cardiovascular disease. No study has examined the relationship between MAOA genotype, childhood trauma and subclinical atherosclerosis. The objective of this investigation was to examine whether childhood trauma moderates the association between MAOA genotype and subclinical atherosclerosis. Methods A sample including 289 middle-aged male twin pairs was studied. Subclinical atherosclerosis was assessed by brachial flow-mediated dilation (FMD) using ultrasound. Childhood trauma, before age 18, was measured with the Early Trauma Inventory and included physical, emotional, and sexual abuse as well as general trauma. Generalized estimating equation models were used to test the main and interactive effects of the MAOA genotype and each domain of childhood trauma on FMD, adjusting for known risk factors. Results General trauma was the most prevalent childhood trauma (28.4%), followed by physical abuse (25.0%), emotional abuse (19.4%) and sexual abuse (11.6%). MAOA genotype was not associated with any domain of childhood trauma (β ≥ 0.36). There was no significant evidence for a main effect for the MAOA genotype (β = 0.02, p = 0.82) or childhood trauma (0.005 < β < 0.10, p > 0.54) on early atherosclerosis. However, a significant interaction was observed between MAOA genotype and physical (βinteraction = 0.37, p = 0.026) or emotional abuse (βinteraction = 0.43, p = 0.025) on subclinical atherosclerosis. Conclusion This study provides initial evidence that childhood trauma modulates the impact of MAOA variant on subclinical atherosclerosis, independent of traditional cardiovascular risk factors. PMID:23723362

  17. Hierarchical resilience with lightweight threads.

    SciTech Connect

    Wheeler, Kyle Bruce

    2011-10-01

    This paper proposes methodology for providing robustness and resilience for a highly threaded distributed- and shared-memory environment based on well-defined inputs and outputs to lightweight tasks. These inputs and outputs form a failure 'barrier', allowing tasks to be restarted or duplicated as necessary. These barriers must be expanded based on task behavior, such as communication between tasks, but do not prohibit any given behavior. One of the trends in high-performance computing codes seems to be a trend toward self-contained functions that mimic functional programming. Software designers are trending toward a model of software design where their core functions are specified in side-effect free or low-side-effect ways, wherein the inputs and outputs of the functions are well-defined. This provides the ability to copy the inputs to wherever they need to be - whether that's the other side of the PCI bus or the other side of the network - do work on that input using local memory, and then copy the outputs back (as needed). This design pattern is popular among new distributed threading environment designs. Such designs include the Barcelona STARS system, distributed OpenMP systems, the Habanero-C and Habanero-Java systems from Vivek Sarkar at Rice University, the HPX/ParalleX model from LSU, as well as our own Scalable Parallel Runtime effort (SPR) and the Trilinos stateless kernels. This design pattern is also shared by CUDA and several OpenMP extensions for GPU-type accelerators (e.g. the PGI OpenMP extensions).

  18. Firefighting module development

    NASA Technical Reports Server (NTRS)

    Burns, R. A.

    1981-01-01

    The firefighting module is a lightweight, compact, self contained, helicopter-transportable unit for fighting harbor and other specialty fires as well as for use in emergency water pumping applications. Units were fabricated and tested. A production type unit is undergoing an inservice evaluation and demonstration program at the port of St Louis. The primary purpose is to promote enhanced harbor fire protection at inland and coastal ports. The module and its development are described.

  19. Pitfalls in penetrating trauma.

    PubMed

    van Vugt, A B

    2003-08-01

    In Western Europe the most frequent cause of multiple injuries is blunt trauma. Only few of us have experience with penetrating trauma, without exception far less than in the USA or South-Africa. In Rotterdam, the Erasmus Medical Centre is a level I trauma centre, situated directly in the town centre. All penetrating traumas are directly presented to our emergency department by a well organized ambulance service supported by a mobile medical team if necessary. The delay with scoop and run principles is very short for these cases, resulting in severely injured reaching the hospital alive in increasing frequency. Although the basic principles of trauma care according to the guidelines of the Advanced Trauma Life Support (ATLS) (1-2) are the same for blunt and penetrating trauma with regard to priorities, diagnostics and primary therapy, there are some pitfalls in the strategy of management in penetrating trauma one should be aware of. Simple algorithms can be helpful, especially in case of limited experience (3). In case of life-saving procedures, the principles of Damage Control Surgery (DCS) must be followed (4-5). This approach is somewhat different from "traditional" surgical treatment. In the Ist phase prompt interventions by emergency thoracotomy and laparotomy are carried out, with only two goals to achieve: surgical control of haemorrhage and contamination. After temporary life-saving procedures, the 2nd phase is characterized by intensive care treatment, dealing with hypothermia, metabolic acidosis and clotting disturbances. Finally in the 3rd phase, within 6-24 hours, definitive surgical care takes place. In this overview, penetrating injuries of neck, thorax, abdomen and extremities will be outlined. Penetrating cranial injuries, as a neurosurgical emergency with poor prognosis, are not discussed. History and physical examination remain the corner stones of good medical praxis. In a work-up according to ATLS principles airway, breathing and circulation

  20. Classification of Liver Trauma

    PubMed Central

    Rizoli, Sandro B.; Brenneman, Frederick D.; Hanna, Sherif S.; Kahnamoui, Kamyar

    1996-01-01

    The classification of liver injuries is important for clinical practice, clinical research and quality assurance activities. The Organ Injury Scaling (OIS) Committee of the American Association for the Surgery of Trauma proposed the OIS for liver trauma in 1989. The purpose ofthe present study was to apply this scale to a cohort ofliver trauma patients managed at a single Canadian trauma centre from January 1987 to June 1992.170 study patients were identified and reviewed. The mean age was 30, with 69% male and a mean ISS of 33.90% had a blunt mechanism ofinjury. The 170 patients were categorized into the 60IS grades ofliver injury. The number of units of blood transfused, the magnitude of the operative treatment required, the liver-related complications and the liver-related mortality correlated well with the OIS grade. The OIS grade was unable to predict the need for laparotomy or the length of stay in hospital. We conclude that the OIS is a useful, practical and important tool for the categorization of liver injuries, and it may prove to be the universally accepted classification scheme in liver trauma. PMID:8809585

  1. Epidemiology of severe trauma.

    PubMed

    Alberdi, F; García, I; Atutxa, L; Zabarte, M

    2014-12-01

    Major injury is the sixth leading cause of death worldwide. Among those under 35 years of age, it is the leading cause of death and disability. Traffic accidents alone are the main cause, fundamentally in low- and middle-income countries. Patients over 65 years of age are an increasingly affected group. For similar levels of injury, these patients have twice the mortality rate of young individuals, due to the existence of important comorbidities and associated treatments, and are more likely to die of medical complications late during hospital admission. No worldwide, standardized definitions exist for documenting, reporting and comparing data on severely injured trauma patients. The most common trauma scores are the Abbreviated Injury Scale (AIS), the Injury Severity Score (ISS) and the Trauma and Injury severity Score (TRISS). Documenting the burden of injury also requires evaluation of the impact of post-trauma impairments, disabilities and handicaps. Trauma epidemiology helps define health service and research priorities, contributes to identify disadvantaged groups, and also facilitates the elaboration of comparable measures for outcome predictions. PMID:25241267

  2. Male genital trauma

    SciTech Connect

    Jordan, G.H.; Gilbert, D.A.

    1988-07-01

    We have attempted to discuss genital trauma in relatively broad terms. In most cases, patients present with relatively minimal trauma. However, because of the complexity of the structures involved, minimal trauma can lead to significant disability later on. The process of erection requires correct functioning of the arterial, neurologic, and venous systems coupled with intact erectile bodies. The penis is composed of structures that are compliant and distensible to the limits of their compliance. These structures therefore tumesce in equal proportion to each other, allowing for straight erection. Relatively minimal trauma can upset this balance of elasticity, leading to disabling chordee. Likewise, relatively minimal injuries to the vascular erectile structures can lead to significantly disabling spongiofibrosis. The urethra is a conduit of paramount importance. Whereas the development of stricture is generally related to the nature of the trauma, the extent of stricture and of attendant complications is clearly a function of the immediate management. Overzealous debridement can greatly complicate subsequent reconstruction. A delicate balance between aggressive initial management and maximal preservation of viable structures must be achieved. 38 references.

  3. Glutamine May Repress the Weak LPS and Enhance the Strong Heat Shock Induction of Monocyte and Lymphocyte HSP72 Proteins but May Not Modulate the HSP72 mRNA in Patients with Sepsis or Trauma

    PubMed Central

    Briassouli, Efrossini; Tzanoudaki, Marianna; Goukos, Dimitris; Routsi, Christina; Nanas, Serafim; Vardas, Kostas; Apostolou, Kleovoulos; Kanariou, Maria; Daikos, George; Briassoulis, George

    2015-01-01

    Objective. We assessed the lipopolysaccharide (LPS) or heat shock (HS) induction of heat shock protein-72 (HSP72) in peripheral blood mononuclear cells (PBMCs) of patients with severe sepsis (SS) or trauma-related systemic inflammatory response syndrome (SIRS), compared to healthy individuals (H); we also investigated any pre- or posttreatment modulating glutamine (Gln) effect. Methods. SS (11), SIRS (10), and H (19) PBMCs were incubated with 1 μg/mL LPS or 43°HS. Gln 10 mM was either added 1 h before or 1 h after induction or was not added at all. We measured monocyte (m), lymphocyte (l), mRNA HSP72, HSP72 polymorphisms, interleukins (ILs), monocyte chemoattractant protein-1 (MCP-1), and cortisol levels. Results. Baseline lHSP72 was higher in SS (p < 0.03), and mHSP72 in SIRS (p < 0.02), compared to H. Only HS induced l/mHSP72/mRNA HSP72; LPS induced IL-6, IL-8, IL-10, and MCP-1. Induced mRNA was related to l/mHSP72, and was related negatively to cytokines. Intracellular l/mHSP72/HSP72 mRNA was related to serum ILs, not being influenced by cortisol, illness severity, and HSP72 polymorphisms. Gln did not induce mRNA in any group but modified l/mHSP72 after LPS/HS induction unpredictably. Conclusions. HSP72 mRNA and l/mHSP72 are higher among critically ill patients, further induced by HS, not by LPS. HSP72 proteins and HSP72 mRNA are related to serum ILs and are negatively related to supernatant cytokines, not being influenced by HSP72 polymorphisms, cortisol, or illness severity. Gln may depress l/mHSP72 after LPS exposure and enhance them after HS induction, but it may not affect early induced HSP72 mRNA. PMID:26550577

  4. A lightweight shape-memory magnesium alloy.

    PubMed

    Ogawa, Yukiko; Ando, Daisuke; Sutou, Yuji; Koike, Junichi

    2016-07-22

    Shape-memory alloys (SMAs), which display shape recovery upon heating, as well as superelasticity, offer many technological advantages in various applications. Those distinctive behaviors have been observed in many polycrystalline alloy systems such as nickel titantium (TiNi)-, copper-, iron-, nickel-, cobalt-, and Ti-based alloys but not in lightweight alloys such as magnesium (Mg) and aluminum alloys. Here we present a Mg SMA showing superelasticity of 4.4% at -150°C and shape recovery upon heating. The shape-memory properties are caused by reversible martensitic transformation. This Mg alloy includes lightweight scandium, and its density is about 2 grams per cubic centimeter, which is one-third less than that of practical TiNi SMAs. This finding raises the potential for development and application of lightweight SMAs across a number of industries. PMID:27463668

  5. A lightweight shape-memory magnesium alloy

    NASA Astrophysics Data System (ADS)

    Ogawa, Yukiko; Ando, Daisuke; Sutou, Yuji; Koike, Junichi

    2016-07-01

    Shape-memory alloys (SMAs), which display shape recovery upon heating, as well as superelasticity, offer many technological advantages in various applications. Those distinctive behaviors have been observed in many polycrystalline alloy systems such as nickel titantium (TiNi)–, copper-, iron-, nickel-, cobalt-, and Ti-based alloys but not in lightweight alloys such as magnesium (Mg) and aluminum alloys. Here we present a Mg SMA showing superelasticity of 4.4% at –150°C and shape recovery upon heating. The shape-memory properties are caused by reversible martensitic transformation. This Mg alloy includes lightweight scandium, and its density is about 2 grams per cubic centimeter, which is one-third less than that of practical TiNi SMAs. This finding raises the potential for development and application of lightweight SMAs across a number of industries.

  6. Paediatric Blunt Torso Trauma

    PubMed Central

    Bhatti, Khalid M.; Taqi, Kadhim M.; Al-Harthy, Ahmed Z. S.; Hamid, Rana S.; Al-Balushi, Zainab N.; Sankhla, Dilip K.; Al-Qadhi, Hani A.

    2016-01-01

    Objectives: Trauma is the greatest cause of morbidity and mortality in paediatric/adolescent populations worldwide. This study aimed to describe trauma mechanisms, patterns and outcomes among children with blunt torso trauma admitted to the Sultan Qaboos University Hospital (SQUH) in Muscat, Oman. Methods: This retrospective single-centre study involved all children ≤12 years old with blunt torso trauma admitted for paediatric surgical care at SQUH between January 2009 and December 2013. Medical records were analysed to collect demographic and clinical data. Results: A total of 70 children were admitted with blunt torso trauma during the study period, including 39 (55.7%) male patients. The mean age was 5.19 ± 2.66 years. Of the cohort, 35 children (50.0%) received their injuries after having been hit by cars as pedestrians, while 19 (27.1%) were injured by falls, 12 (17.1%) during car accidents as passengers and four (5.7%) by falling heavy objects. According to computed tomography scans, thoracic injuries were most common (65.7%), followed by abdominal injuries (42.9%). The most commonly involved solid organs were the liver (15.7%) and spleen (11.4%). The majority of the patients were managed conservatively (92.9%) with a good outcome (74.3%). The mortality rate was 7.1%. Most deaths were due to multisystem involvement. Conclusion: Among children with blunt torso trauma admitted to SQUH, the main mechanism of injury was motor vehicle accidents. As a result, parental education and enforcement of infant car seat/child seat belt laws are recommended. Conservative management was the most successful approach. PMID:27226913

  7. Trauma-Focused CBT for Youth who Experience Ongoing Traumas

    PubMed Central

    Cohen, Judith A.; Mannarino, Anthony P.; Murray, Laura A.

    2011-01-01

    Many youth experience ongoing trauma exposure, such as domestic or community violence. Clinicians often ask whether evidence-based treatments containing exposure components to reduce learned fear responses to historical trauma are appropriate for these youth. Essentially the question is, if youth are desensitized to their trauma experiences, will this in some way impair their responding to current or ongoing trauma? The paper addresses practical strategies for implementing one evidence-based treatment, Trauma-Focused Cognitive Behavioral Therapy (TF-CBT) for youth with ongoing traumas. Collaboration with local therapists and families participating in TF-CBT community and international programs elucidated effective strategies for applying TF-CBT with these youth. These strategies included: 1) enhancing safety early in treatment; 2) effectively engaging parents who experience personal ongoing trauma; and 3) during the trauma narrative and processing component focusing on a) increasing parental awareness and acceptance of the extent of the youths’ ongoing trauma experiences; b) addressing youths’ maladaptive cognitions about ongoing traumas; and c) helping youth differentiate between real danger and generalized trauma reminders. Case examples illustrate how to use these strategies in diverse clinical situations. Through these strategies TF-CBT clinicians can effectively improve outcomes for youth experiencing ongoing traumas. PMID:21855140

  8. Trauma-Focused CBT for Youth Who Experience Ongoing Traumas

    ERIC Educational Resources Information Center

    Cohen, Judith A.; Mannarino, Anthony P.; Murray, Laura K.

    2011-01-01

    Many youth experience ongoing trauma exposure, such as domestic or community violence. Clinicians often ask whether evidence-based treatments containing exposure components to reduce learned fear responses to historical trauma are appropriate for these youth. Essentially the question is, if youth are desensitized to their trauma experiences, will…

  9. Assuring optimal trauma care: the role of trauma centre accreditation

    PubMed Central

    Simons, Richard; Kirkpatrick, Andrew

    2002-01-01

    Optimal care of the injured patient requires the delivery of appropriate, definitive care shortly after injury. Over the last 30 to 40 years, civilian trauma systems and trauma centres have been developed in the United States based on experience gained in military conflicts, particularly in Korea and Vietnam. A similar process is evolving in Canada. National trauma committees in the US and Canada have defined optimal resources to meet the goal of rapid, appropriate care in trauma centres. They have introduced programs (verification or accreditation) to externally audit trauma centre performance based on these guidelines. It is generally accepted that implementing trauma systems results in decreased preventable death and improved survival after trauma. What is less clear is the degree to which each facet of trauma system development contributes to this improvement. The relative importance of national performance guidelines and trauma centre audit as integral steps toward improved outcomes following injury are reviewed. Current Trauma Association of Canada guidelines for trauma centres are presented and the process of trauma centre accreditation is discussed. PMID:12174987

  10. Advances in prehospital trauma care

    PubMed Central

    Williamson, Kelvin; Ramesh, Ramaiah; Grabinsky, Andreas

    2011-01-01

    Prehospital trauma care developed over the last decades parallel in many countries. Most of the prehospital emergency medical systems relied on input or experiences from military medicine and were often modeled after the existing military procedures. Some systems were initially developed with the trauma patient in mind, while other systems were tailored for medical, especially cardiovascular, emergencies. The key components to successful prehospital trauma care are the well-known ABCs of trauma care: Airway, Breathing, Circulation. Establishing and securing the airway, ventilation, fluid resuscitation, and in addition, the quick transport to the best-suited trauma center represent the pillars of trauma care in the field. While ABC in trauma care has neither been challenged nor changed, new techniques, tools and procedures have been developed to make it easier for the prehospital provider to achieve these goals in the prehospital setting and thus improve the outcome of trauma patients. PMID:22096773

  11. Lightweight SAR GMTI radar technology development

    NASA Astrophysics Data System (ADS)

    Kirk, John C.; Lin, Kai; Gray, Andrew; Hseih, Chung; Darden, Scott; Kwong, Winston; Majumder, Uttam; Scarborough, Steven

    2013-05-01

    A small and lightweight dual-channel radar has been developed for SAR data collections. Using standard Displaced Phase Center Antenna (DPCA) radar digital signal processing, SAR GMTI images have been obtained. The prototype radar weighs 5-lbs and has demonstrated the extraction of ground moving targets (GMTs) embedded in high-resolution SAR imagery data. Heretofore this type of capability has been reserved for much larger systems such as the JSTARS. Previously, small lightweight SARs featured only a single channel and only displayed SAR imagery. Now, with the advent of this new capability, SAR GMTI performance is now possible for small UAV class radars.

  12. Southern Regional Center for Lightweight Innovative Design

    SciTech Connect

    Horstemeyer, Mark F.; Wang, Paul

    2011-12-27

    The three major objectives of this Phase III project are: To develop experimentally validated cradle-to-grave modeling and simulation tools to optimize automotive and truck components for lightweighting materials (aluminum, steel, and Mg alloys and polymer-based composites) with consideration of uncertainty to decrease weight and cost, yet increase the performance and safety in impact scenarios; To develop multiscale computational models that quantify microstructure-property relations by evaluating various length scales, from the atomic through component levels, for each step of the manufacturing process for vehicles; and To develop an integrated K-12 educational program to educate students on lightweighting designs and impact scenarios.

  13. Improving Trauma Care in India: the Potential Role of the Rural Trauma Team Development Course (RTTDC).

    PubMed

    Ali, Jameel; Kumar, Subodh; Gautam, Subash; Sorvari, Anne; Misra, Mahesh C

    2015-12-01

    The Rural Trauma Team Development Course (RTTDC) was devised to optimize trauma resuscitation training in under-resourced rural institutions. This program appears ideal for India because of its dense traffic, large population, and high frequency of rural trauma. We report on the feasibility and desirability of introducing RTTDC in India. An instructor course for 20 faculties and a provider course for 23 were conducted in New Delhi, India. The courses were evaluated by multiple choice question (MCQ) performance, by rating the modules on a three-point scale (1 = very relevant, 2 = relevant, and 3 = not relevant) for communication skills, principles of performance improvement and patient safety (PIPS), and clinical scenarios. Evaluation questionnaires including desirability of promulgation in India were completed using a five-point Likert Scale (1 = strongly agree, 2 = agree, 3 = neutral, 4 = disagree, and 5 = strongly disagree). Overall written comments were also provided. Both faculty and providers improved post-course MCQ scores (p < 0.05) with lower scores in the provider group. Seventy-eight percent faculty and 74 % providers rated the communication module very relevant. PIPS was rated very relevant by 72 % faculty and 65 % providers. There were over 150 comments, generally positive with over 90 % of both faculty and providers rating strongly agree to agree that the course be promulgated widely in India. The RTTDC including plans for promulgation was enthusiastically received in India, and its potential for improving trauma care including communication skills and PIPS appears excellent. PMID:26729998

  14. High-Pressure Lightweight Thrusters

    NASA Technical Reports Server (NTRS)

    Holmes, Richard; McKechnie, Timothy; Shchetkovskiy, Anatoliy; Smirnov, Alexander

    2013-01-01

    Returning samples of Martian soil and rock to Earth is of great interest to scientists. There were numerous studies to evaluate Mars Sample Return (MSR) mission architectures, technology needs, development plans, and requirements. The largest propulsion risk element of the MSR mission is the Mars Ascent Vehicle (MAV). Along with the baseline solid-propellant vehicle, liquid propellants have been considered. Similar requirements apply to other lander ascent engines and reaction control systems. The performance of current state-ofthe- art liquid propellant engines can be significantly improved by increasing both combustion temperature and pressure. Pump-fed propulsion is suggested for a single-stage bipropellant MAV. Achieving a 90-percent stage propellant fraction is thought to be possible on a 100-kg scale, including sufficient thrust for lifting off Mars. To increase the performance of storable bipropellant rocket engines, a high-pressure, lightweight combustion chamber was designed. Iridium liner electrodeposition was investigated on complex-shaped thrust chamber mandrels. Dense, uniform iridium liners were produced on chamber and cylindrical mandrels. Carbon/carbon composite (C/C) structures were braided over iridium-lined mandrels and densified by chemical vapor infiltration. Niobium deposition was evaluated for forming a metallic attachment flange on the carbon/ carbon structure. The new thrust chamber was designed to exceed state-of-the-art performance, and was manufactured with an 83-percent weight savings. High-performance C/Cs possess a unique set of properties that make them desirable materials for high-temperature structures used in rocket propulsion components, hypersonic vehicles, and aircraft brakes. In particular, more attention is focused on 3D braided C/Cs due to their mesh-work structure. Research on the properties of C/Cs has shown that the strength of composites is strongly affected by the fiber-matrix interfacial bonding, and that weakening

  15. Firefighting Module

    NASA Technical Reports Server (NTRS)

    1984-01-01

    Firefly II pump module is NASA's Marshall Space Flight Center's commercial offshoot of a NASA/US Coast Guard program involving development of a lightweight, helicopter-transportable firefighting module for a quick response in combating shipboard or harbor fires. Operable on land or water, the Amphib One is equipped with 3 water cannons. When all 3 are operating, unit pumps more than 3,000 gallons a minute. Newly developed model used by U.S. Coast Guard can pump 5,000 gallons per minute. It was designed for applications such as firefighting onboard ship fires, emergency dockside water pumping, dewatering ships in danger of sinking, flood control, and emergency water supply at remote locations.

  16. Structured Sensory Trauma Interventions

    ERIC Educational Resources Information Center

    Steele, William; Kuban, Caelan

    2010-01-01

    This article features the National Institute of Trauma and Loss in Children (TLC), a program that has demonstrated via field testing, exploratory research, time series studies, and evidence-based research studies that its Structured Sensory Intervention for Traumatized Children, Adolescents, and Parents (SITCAP[R]) produces statistically…

  17. Pediatric head trauma

    PubMed Central

    Alexiou, George A; Sfakianos, George; Prodromou, Neofytos

    2011-01-01

    Head injury in children accounts for a large number of emergency department visits and hospital admissions. Falls are the most common type of injury, followed by motor-vehicle-related accidents. In the present study, we discuss the evaluation, neuroimaging and management of children with head trauma. Furthermore, we present the specific characteristics of each type of pediatric head injury. PMID:21887034

  18. Trauma Induced Myocardial Infarction

    PubMed Central

    Lolay, Georges A.; Abdel-Latef, Ahmed K.

    2016-01-01

    Chest Trauma in athletes is a common health problem. However, myocardial infarction secondary to coronary dissection in the setting of blunt chest trauma is extremely rare. We report a case of acute inferior wall myocardial infarction following blunt chest trauma. A 32-year-old male with no relevant medical problems was transferred to our medical center for retrosternal chest pain after being elbowed in the chest during a soccer game. Few seconds later, he started experiencing sharp retrosternal chest pain that was severe to that point where he called the emergency medical service. Upon arrival to the Trauma department patient was still complaining of chest pain. ECG demonstrated ST segment elevation in the inferior leads with reciprocal changes in the lateral leads all consistent with active ischemia. After rolling out Aortic dissection, patient was loaded with ASA, ticagerlor, heparin and was emergently taken to the cardiac catheterization lab. Coronary angiography demonstrated 100% thrombotic occlusion in the distal right coronary artery with TIMI 0 flow distally. After thrombus aspiration, a focal dissection was noted on the angiogram that was successfully stented. Two days after admission patient was discharged home. Echocardiography prior to discharge showed inferior wall akinesis, normal right ventricular systolic function and normal overall ejection fraction. PMID:26490501

  19. Early Childhood Trauma

    ERIC Educational Resources Information Center

    National Child Traumatic Stress Network, 2010

    2010-01-01

    Early childhood trauma generally refers to the traumatic experiences that occur to children aged 0-6. Because infants' and young children's reactions may be different from older children's, and because they may not be able to verbalize their reactions to threatening or dangerous events, many people assume that young age protects children from the…

  20. The Evolution of the Society of Trauma Nurses' Leadership Institute.

    PubMed

    Krichten, Amy; Kyle, Amber

    2015-01-01

    The Society of Trauma Nurses (STN) understands the increasing complexity of trauma care and the vital leadership role nurses play. In 2009, the STN took the initiative to form a Leadership Committee tasked with researching the possibility of developing a mechanism to offer trauma leaders opportunities in leadership development. Investigation and collaboration among the committee members, with input from the Board of Directors and the organization's executive director, resulted in the STN Leadership Institute. The Leadership Institute design is to equip trauma nurses with the tools needed to effectively lead from the bedside to the boardroom and beyond through web-based modules. Operationalization of the plan took intense focus and dedicated leadership. Following a pilot study, the initial cohort ran the first quarter of 2015. Because of the positive feedback and identified opportunities for improvement, the program will continue to be offered with further expansion planning underway. PMID:26574939

  1. Imaging in spinal trauma.

    PubMed

    Van Goethem, Johan W M; Maes, Menno; Ozsarlak, Ozkan; van den Hauwe, Luc; Parizel, Paul M

    2005-03-01

    Because it may cause paralysis, injury to the spine is one of the most feared traumas, and spinal cord injury is a major cause of disability. In the USA approximately 10,000 traumatic cervical spine fractures and 4000 traumatic thoracolumbar fractures are diagnosed each year. Although the number of individuals sustaining paralysis is far less than those with moderate or severe brain injury, the socioeconomic costs are significant. Since most of the spinal trauma patients survive their injuries, almost one out of 1000 inhabitants in the USA are currently being cared for partial or complete paralysis. Little controversy exists regarding the need for accurate and emergent imaging assessment of the traumatized spine in order to evaluate spinal stability and integrity of neural elements. Because clinicians fear missing occult spine injuries, they obtain radiographs for nearly all patients who present with blunt trauma. We are influenced on one side by fear of litigation and the possible devastating medical, psychologic and financial consequences of cervical spine injury, and on the other side by pressure to reduce health care costs. A set of clinical and/or anamnestic criteria, however, can be very useful in identifying patients who have an extremely low probability of injury and who consequently have no need for imaging studies. Multidetector (or multislice) computed tomography (MDCT) is the preferred primary imaging modality in blunt spinal trauma patients who do need imaging. Not only is CT more accurate in diagnosing spinal injury, it also reduces imaging time and patient manipulation. Evidence-based research has established that MDCT improves patient outcome and saves money in comparison to plain film. This review discusses the use, advantages and disadvantages of the different imaging techniques used in spinal trauma patients and the criteria used in selecting patients who do not need imaging. Finally an overview of different types of spinal injuries is given

  2. Small, Lightweight Welding-Current Indicator

    NASA Technical Reports Server (NTRS)

    Huston, Steven W.

    1990-01-01

    Welding-current indicator made of surface-mounted components on flexible circuit board. Holds variety of components on surface. After assembly, flexible circuit wrapped to fit around transformer core. Surface-mounted devices make it unnecessary to drill holes in circuit board to accommodate component leads. Use of small surface-mounted devices result in lightweight, compact indicator circuit.

  3. Lightweight Electronic Camera for Research on Clouds

    NASA Technical Reports Server (NTRS)

    Lawson, Paul

    2006-01-01

    "Micro-CPI" (wherein "CPI" signifies "cloud-particle imager") is the name of a small, lightweight electronic camera that has been proposed for use in research on clouds. It would acquire and digitize high-resolution (3- m-pixel) images of ice particles and water drops at a rate up to 1,000 particles (and/or drops) per second.

  4. Lightweight solar concentrator structures, phase 2

    NASA Technical Reports Server (NTRS)

    Williams, Brian E.; Kaplan, Richard B.

    1993-01-01

    This report summarizes the results of the program conducted by Ultramet under SBIR Phase 2 Contract NAS3-25418. The objective of this program was to develop lightweight materials and processes for advanced high accuracy Space Solar Concentrators using rigidized foam for the substrate structure with an integral optical surface.

  5. Method of fabricating lightweight honeycomb structures

    NASA Technical Reports Server (NTRS)

    Goela, Jitendra S. (Inventor); Pickering, Michael (Inventor); Taylor, Raymond L. (Inventor)

    1992-01-01

    A process is disclosed for fabricating lightweight honeycomb type structures out of material such as silicon carbide (SiC) and silicon (S). The lightweight structure consists of a core to define the shape and size of the structure. The core is coated with an appropriate deposit such as SiC or Si to give the lightweight structure strength and stiffness and for bonding the lightweight structure to another surface. The core is fabricated from extremely thin ribs of appropriately stiff and strong material such as graphite. First, a graphite core consisting of an outer hexagonal cell with six inner triangular cells is constructed from the graphite ribs. The graphite core may be placed on the back-up side of a SiC faceplate and then coated with SiC to produce a monolithic structure without the use of any bonding agent. Cores and methods for the fabrication thereof in which the six inner triangular cells are further divided into a plurality of cells are also disclosed.

  6. The Light-Weight Group Library

    Energy Science and Technology Software Center (ESTSC)

    2012-07-02

    The Light-Weight Group (LWGRP) bibrary provides data structures and collective routines to define and operate on groups of MPI processes. Groups can be created and freed efficiently in O(log N) time space requiring less overhead that constructing full MPI communicators. This facilitates faster development of applications and libraries that need to rapidly create, use, and destroy process groups.

  7. Compact, Lightweight Servo-Controllable Brakes

    NASA Technical Reports Server (NTRS)

    Lovchik, Christopher S.; Townsend, William; Guertin, Jeffrey; Matsuoka, Yoky

    2010-01-01

    Compact, lightweight servo-controllable brakes capable of high torques are being developed for incorporation into robot joints. A brake of this type is based partly on the capstan effect of tension elements. In a brake of the type under development, a controllable intermediate state of torque is reached through on/off switching at a high frequency.

  8. FY 2012 Lightweight Materials Annual Report

    SciTech Connect

    Warren, David C.

    2013-04-15

    The FY 2012 Annual Progress Report for Lightweight Materials provides a detailed description of the activities and technical accomplishments which focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce light and heavy duty vehicle weight without compromising other attributes such as safety, performance, recyclability, and cost.

  9. Vehicle Lightweighting: 40% and 45% Weight Savings Analysis: Technical Cost Modeling for Vehicle Lightweighting

    SciTech Connect

    Mascarin, Anthony; Hannibal, Ted; Raghunathan, Anand; Ivanic, Ziga; Francfort, James

    2015-04-01

    The U.S. Department of Energy’s Vehicle Technologies Office, Materials area commissioned a study to model and assess manufacturing economics of alternative design and production strategies for a series of lightweight vehicle concepts. The strategic targets were a 40% and a 45% mass reduction relative to a standard North American midsize passenger sedan at an effective cost of $3.42 per pound (lb) saved. The baseline vehicle was an average of several available vehicles in this class. Mass and cost breakdowns from several sources were used, including original equipment manufacturers’ (OEMs’) input through U.S. Department of Energy’s Vehicle Technologies Office programs and public presentations, A2Mac1 LLC’s teardown information, Lotus Engineering Limited and FEV, Inc. breakdowns in their respective lightweighting studies, and IBIS Associates, Inc.’s decades of experience in automotive lightweighting and materials substitution analyses. Information on lightweighting strategies in this analysis came from these same sources and the ongoing U.S. Department of Energy-funded Vehma International of America, Inc. /Ford Motor Company Multi-Material Lightweight Prototype Vehicle Demonstration Project, the Aluminum Association Transportation Group, and many United States Council for Automotive Research’s/United States Automotive Materials Partnership LLC lightweight materials programs.

  10. Study of Automated Module Fabrication for Lightweight Solar Blanket Utilization

    NASA Technical Reports Server (NTRS)

    Gibson, C. E.

    1979-01-01

    Cost-effective automated techniques for accomplishing the titled purpose; based on existing in-house capability are described. As a measure of the considered automation, the production of a 50 kilowatt solar array blanket, exclusive of support and deployment structure, within an eight-month fabrication period was used. Solar cells considered for this blanket were 2 x 4 x .02 cm wrap-around cells, 2 x 2 x .005 cm and 3 x 3 x .005 cm standard bar contact thin cells, all welded contacts. Existing fabrication processes are described, the rationale for each process is discussed, and the capability for further automation is discussed.

  11. Trauma Tactics: Rethinking Trauma Education for Professional Nurses.

    PubMed

    Garvey, Paula; Liddil, Jessica; Eley, Scott; Winfield, Scott

    2016-01-01

    According to the National Trauma Institute (2015), trauma accounts for more than 180,000 deaths each year in the United States. Nurses play a significant role in the care of trauma patients and therefore need appropriate education and training (L. ). Although several courses exist for trauma education, many nurses have not received adequate education in trauma management (B. ; L. ). Trauma Tactics, a 2-day course that focuses on high-fidelity human patient simulation, was created to meet this educational need. This descriptive study was conducted retrospectively to assess the effectiveness of the Trauma Tactics course. Pre- and postsurveys, tests, and simulation performance were used to evaluate professional nurses who participated in Trauma Tactics over a 10-month period. Fifty-five nurses were included in the study. Pre- and postsurveys revealed an increase in overall confidence, test scores increased by an average of 2.5 points, and simulation performance scores increased by an average of 16 points. Trauma Tactics is a high-quality course that provides a valuable and impactful educational experience for nurses. Further research is needed to evaluate the long-term effects of Trauma Tactics and its impacts on quality of care and patient outcomes. PMID:27414143

  12. Needle Thoracotomy in Trauma.

    PubMed

    Rottenstreich, Misgav; Fay, Shmuel; Gendler, Sami; Klein, Yoram; Arkovitz, Marc; Rottenstreich, Amihai

    2015-12-01

    Tension pneumothorax is one of the leading causes of preventable death in trauma patients. Needle thoracotomy (NT) is the currently accepted first-line intervention but has not been well validated. In this review, we have critically discussed the evidence for NT procedure, re-examined the recommendations by the Advanced Trauma Life Support organization and investigated the safest and most effective way of NT. The current evidence to support the use of NT is limited. However, when used, it should be applied in the 2nd intercostal space at midclavicular line using a catheter length of at least 4.5 cm. Alternative measures should be studied for better prehospital management of tension pneumothorax. PMID:26633663

  13. Maxillofacial trauma scoring systems.

    PubMed

    Sahni, Vaibhav

    2016-07-01

    The changing complexity of maxillofacial fractures in recent years has created a situation where classical systems of classification of maxillofacial injuries fall short of defining trauma particularly that observed with high-velocity collisions where more than one region of the maxillofacial skeleton is affected. Trauma scoring systems designed specifically for the maxillofacial region are aimed to provide a more accurate assessment of the injury, its prognosis, the possible treatment outcomes, economics, length of hospital stay, and triage. The evolution and logic of such systems along with their merits and demerits are discussed. The author also proposes a new system to aid users in quickly and methodically choosing the system best suited to their needs without having to study a plethora of literature available in order to isolate their choice. PMID:26971084

  14. Substance Abuse and Trauma.

    PubMed

    Simmons, Shannon; Suárez, Liza

    2016-10-01

    There is a strong, bidirectional link between substance abuse and traumatic experiences. Teens with cooccurring substance use disorders (SUDs) and posttraumatic stress disorder (PTSD) have significant functional and psychosocial impairment. Common neurobiological foundations point to the reinforcing cycle of trauma symptoms, substance withdrawal, and substance use. Treatment of teens with these issues should include a systemic and integrated approach to both the SUD and the PTSD. PMID:27613348

  15. Rethinking historical trauma.

    PubMed

    Kirmayer, Laurence J; Gone, Joseph P; Moses, Joshua

    2014-06-01

    Recent years have seen the rise of historical trauma as a construct to describe the impact of colonization, cultural suppression, and historical oppression of Indigenous peoples in North America (e.g., Native Americans in the United States, Aboriginal peoples in Canada). The discourses of psychiatry and psychology contribute to the conflation of disparate forms of violence by emphasizing presumptively universal aspects of trauma response. Many proponents of this construct have made explicit analogies to the Holocaust as a way to understand the transgenerational effects of genocide. However, the social, cultural, and psychological contexts of the Holocaust and of post-colonial Indigenous "survivance" differ in many striking ways. Indeed, the comparison suggests that the persistent suffering of Indigenous peoples in the Americas reflects not so much past trauma as ongoing structural violence. The comparative study of genocide and other forms of massive, organized violence can do much to illuminate both common mechanisms and distinctive features, and trace the looping effects from political processes to individual experience and back again. The ethics and pragmatics of individual and collective healing, restitution, resilience, and recovery can be understood in terms of the self-vindicating loops between politics, structural violence, public discourse, and embodied experience. PMID:24855142

  16. [The Trauma Network of the German Society for Trauma 2009].

    PubMed

    Kühne, C A; Mand, C; Sturm, J; Lackner, C K; Künzel, A; Siebert, H; Ruchholtz, S

    2009-10-01

    In 2009, 3 years after the foundation of the Trauma Network of the German Society for Trauma (TraumaNetzwerkD DGU), the majority of German hospitals participating in the treatment of seriously injured patients is registered in regional trauma networks (TNW). Currently there are 41 trauma networks with more than 660 hospitals in existence, 18 more are registered but are still in the planning phase. Each Federal State has an average of 39 trauma centres of different levels taking part in the treatment of seriously injured patients and every trauma network has an average catchment area of 8708 km(2). The most favourable geographical infrastructure conditions exist in Nordrhein-Westfalen, the least favourable in Sachsen-Anhalt and Mecklenburg-Vorpommern. A total of 95 hospitals have already fulfilled the first audit of the structural, personnel and qualitative requirements by the certification bodies. Examination of the check lists of 26 hospitals showed shortcomings in the clinical structure so that these hospitals must be rechecked after correction of the shortcomings. A total of 59 hospitals throughout Germany were successfully audited and only one failed to fulfil the requirements. Because of the varying sizes of the trauma networks there are differences in the areas covered by each trauma network and trauma centre. Concerning the process of certification and auditing (together with the company DIOcert) it could be seen that by careful examination of the check lists of each hospital unforeseen problems during the audit could be avoided. The following article will present the current state of development of the Trauma Network of the German Society for Trauma and describe the certification and auditing process. PMID:19756455

  17. Lightweight Cement Slurries based on vermiculite

    NASA Astrophysics Data System (ADS)

    Minaev, K.; Gorbenko, V.; Ulyanova, O.

    2014-08-01

    The main purpose of the research is to study the lightweight cement slurry based on vermiculite and its parameters in accordance with GOST 1581-96 requirements as well as improvement of its formulation by polymer additives. Analysis of vermiculite-containing mixture providing the lowest density while maintaining other required parameters was conducted. As a cement base, cement PTscT-I-G-CC-1, cement PTscT - 100 and vermiculite M200 and M150 were used. Vermiculite content varied from 10 to 15 %; and water-to-cement-ratio ranged from 0.65 to 0.8. To sum up, despite the fact that lightweight cement slurry based on vermiculite satisfies GOST 1581-96 requirements under laboratory conditions, field studies are necessary in order to make a conclusion about applicability of this slurry for well cementing.

  18. Manufacturing of lightweighted ZERODUR components at SCHOTT

    NASA Astrophysics Data System (ADS)

    Döhring, Thorsten; Thomas, Armin; Jedamzik, Ralf; Kohlmann, Heiko; Hartmann, Peter

    2007-09-01

    There is a broad range of applications for lightweighted components made from ZERODUR (R) glass ceramic. The main markets are secondary and tertiary mirrors for astronomical telescopes, mirrors and structural components for satellites, and mechanical structures for industrial applications, mainly in microlithography. Prominent examples from astronomy are VLT-M3, GEMINI-M2, SOFIA-M1, MAGELLAN-M2, MMT-M2, and METEOSAT-SEVIRI. At SCHOTT components with blind or undercut semiclosed holes are manufactured, typically with circular, hexagonal, rectangular or triangular shapes. The classical grinding process results in weight reduction factors of about 70 %. By additional acid etching technologies even higher lightweighting factors and rib thicknesses below 1 mm have been achieved.

  19. Lightweight composite fighting cover prototype development program

    SciTech Connect

    Wrenn, G.E. Jr.; Frame, B.J.; Gwaltney, R.C.; Akerman, M.A.

    1996-07-01

    The U.S. Army Field Assistance Science and Technology Program requested Oak Ridge National Laboratory (ORNL) to demonstrate the use of lightweight composite materials in construction of overhead covers for reinforced infantry fighting positions. In recent years, ORNL researchers have designed and tested several concepts for lightweight ballistic protection structures, and they have developed numerous prototype composite structures for military and civilian applications. In the current program, composite panel designs and materials are tested and optimized to meet anticipated static and dynamic load conditions for the overhead cover structure. Ten prototype composite covers were built at ORNL for use in Army field tests. Each composite cover has a nominal surface area of 12 ft[sup 2] and a nominal weight of 8 lb. Four of the prototypes are made with folding sections to improve their handling characteristics. The composite covers exhibit equivalent performance in Army field tests to covers made with conventional materials that weigh four times as much.

  20. Cryostable lightweight frit bonded silicon mirror

    NASA Astrophysics Data System (ADS)

    Anthony, F.; McCarter, D.; Tangedahl, M.; Content, D.

    The excellent polishability, low density and relatively high stiffness of silicon make it an attractive candidate for optical applications that require superior performance. Assembly of silicon details by means of glass frit bonding permits significant light weighting thus enhancing the benefit of silicon mirrors. To demonstrate the performance potential, a small lightweight glass frit bonded silicon mirror was fabricated and tested for cryoability. The test mirror was 12.5cm in diameter with a 60cm spherical radius and a maximum thickness, at the perimeter, of 2.5cm. A machined silicon core was used to stiffen the two face sheets of the silicon sandwich. These three elements were assembled, by glass frit bonding, to form the substrate that was polished. The experimental evaluation in a liquid nitrogen cryostat, demonstrated cryostability performance significantly better than required by the mirror specification. Key WordsCryostable, Lightweight, Silicon, Frit Bond, Spherical, Mirror

  1. Semi lightweight concretes produced by volcanic slags

    SciTech Connect

    Topcu, I.B.

    1997-01-01

    The properties of the semi-lightweight concretes produced by using volcanic slags as coarse aggregate were investigated. The volcanic slags were brought from the quarry crushed and then classified according to their aggregate sizes of 0--8, 0--16, 0--31.5, 4--8, and 8--16 mm. The concrete series of five different volcanic slag sizes were produced by addition of a specific cement paste in volume fractions of 0.15, 0.30, 0.45 and 0.60. The cubic, cylindrical and prismatic specimens were made from each of the concrete series. The physical and mechanical properties of the concrete series were determined by conducting unit weight, slump, ultrasound velocity, Schmidt hardness, cylindrical and cubic compressive, bending and splitting tensile strength tests. The results indicated that the volcanic slags can be safely used in the production of semi lightweight concrete.

  2. Trauma exposure and cigarette smoking: the impact of negative affect and affect-regulatory smoking motives.

    PubMed

    Farris, Samantha G; Zvolensky, Michael J; Beckham, Jean C; Vujanovic, Anka A; Schmidt, Norman B

    2014-01-01

    Cognitive-affective mechanisms related to the maintenance of smoking among trauma-exposed individuals are largely unknown. Cross-sectional data from trauma-exposed treatment-seeking smokers (n = 283) were utilized to test a series of multiple mediator models of trauma exposure and smoking, as mediated by the sequential effects of negative affect and affect-modulation smoking motives. The sequential effects of both mediators indirectly predicted the effect of greater trauma exposure types on nicotine dependence, a biochemical index of smoking, perceived barriers to smoking cessation, and greater withdrawal-related problems during past quit attempts. Negative affect and affect-modulation motives for smoking may contribute to the trauma-smoking association. PMID:25299617

  3. Trauma Exposure and Cigarette Smoking: The Impact of Negative Affect and Affect-Regulatory Smoking Motives

    PubMed Central

    Farris, Samantha G.; Zvolensky, Michael J.; Beckham, Jean C.; Vujanovic, Anka A.; Schmidt, Norman B.

    2014-01-01

    Cognitive-affective mechanisms related to the maintenance of smoking among trauma-exposed individuals are largely unknown. Cross-sectional data from trauma-exposed treatment-seeking smokers (n = 283) were utilized to test a series of multiple mediator models of trauma exposure and smoking, as mediated by the sequential effects of negative affect and affect-modulation smoking motives. The sequential effects of both mediators indirectly predicted the effect of greater trauma exposure types on nicotine dependence, a biochemical index of smoking, perceived barriers to smoking cessation, and greater withdrawal-related problems during past quit attempts. Negative affect and affect-modulation motives for smoking may contribute to the trauma-smoking association. PMID:25299617

  4. Orthotic devices using lightweight composite materials

    NASA Technical Reports Server (NTRS)

    Harrison, E., Jr.

    1983-01-01

    Potential applications of high strength, lightweight composite technology in the orthotic field were studied. Several devices were designed and fabricated using graphite-epoxy composite technology. Devices included shoe plates, assistive walker devices, and a Simes prosthesis reinforcement. Several other projects having medical application were investigated and evaluations were made of the potential for use of composite technology. A seat assembly was fabricated using sandwich construction techniques for the Total Wheelchair Project.

  5. A lightweight sensor network management system design

    USGS Publications Warehouse

    Yuan, F.; Song, W.-Z.; Peterson, N.; Peng, Y.; Wang, L.; Shirazi, B.; LaHusen, R.

    2008-01-01

    In this paper, we propose a lightweight and transparent management framework for TinyOS sensor networks, called L-SNMS, which minimizes the overhead of management functions, including memory usage overhead, network traffic overhead, and integration overhead. We accomplish this by making L-SNMS virtually transparent to other applications hence requiring minimal integration. The proposed L-SNMS framework has been successfully tested on various sensor node platforms, including TelosB, MICAz and IMote2. ?? 2008 IEEE.

  6. Flight Controller Software Protects Lightweight Flexible Aircraft

    NASA Technical Reports Server (NTRS)

    2015-01-01

    Lightweight flexible aircraft may be the future of aviation, but a major problem is their susceptibility to flutter-uncontrollable vibrations that can destroy wings. Armstrong Flight Research Center awarded SBIR funding to Minneapolis, Minnesota-based MUSYN Inc. to develop software that helps program flight controllers to suppress flutter. The technology is now available for aircraft manufacturers and other industries that use equipment with automated controls.

  7. Aladin Lite: Lightweight sky atlas for browsers

    NASA Astrophysics Data System (ADS)

    Boch, Thomas

    2014-02-01

    Aladin Lite is a lightweight version of the Aladin tool, running in the browser and geared towards simple visualization of a sky region. It allows visualization of image surveys (JPEG multi-resolution HEALPix all-sky surveys) and permits superimposing tabular (VOTable) and footprints (STC-S) data. Aladin Lite is powered by HTML5 canvas technology and is easily embeddable on any web page and can also be controlled through a Javacript API.

  8. Lightweight Protective Coatings For Titanium Alloys

    NASA Technical Reports Server (NTRS)

    Wiedemann, Karl E.; Taylor, Patrick J.; Clark, Ronald K.

    1992-01-01

    Lightweight coating developed to protect titanium and titanium aluminide alloys and titanium-matrix composite materials from attack by environment when used at high temperatures. Applied by sol-gel methods, and thickness less than 5 micrometers. Reaction-barrier and self-healing diffusion-barrier layers combine to protect titanium alloy against chemical attack by oxygen and nitrogen at high temperatures with very promising results. Can be extended to protection of other environmentally sensitive materials.

  9. Computationally Lightweight Air-Traffic-Control Simulation

    NASA Technical Reports Server (NTRS)

    Knight, Russell

    2005-01-01

    An algorithm for computationally lightweight simulation of automated air traffic control (ATC) at a busy airport has been derived. The algorithm is expected to serve as the basis for development of software that would be incorporated into flight-simulator software, the ATC component of which is not yet capable of handling realistic airport loads. Software based on this algorithm could also be incorporated into other computer programs that simulate a variety of scenarios for purposes of training or amusement.

  10. Trauma Exposure and Posttraumatic Stress Disorder in the Canadian Military

    PubMed Central

    Brunet, Alain; Monson, Eva; Liu, Aihua; Fikretoglu, Deniz

    2015-01-01

    Objective: To estimate the lifetime prevalence of trauma exposure and posttraumatic stress disorder (PTSD) among a representative, active military sample, and to identify demographic and military variables that modulate rates of trauma exposure as well as PTSD rates and duration. Method: A cross-sectional weighted sample of 5155 regular members and 3957 reservists (n = 8441) of the Canadian Armed Forces (CAF) was face-to-face interviewed using a lay-administered structured interview that generates Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, psychiatric diagnoses. Results: Within this sample, 85.6% reported 1 or more trauma exposure, with a median number of 3 or more exposures. Compared with males, females were less likely (P < 0.05) to be exposed to warlike trauma (adjusted odds ratio [AOR] 0.40), disasters (AOR 0.43), assaultive violence (AOR 0.52), and witnessing trauma (AOR 0.75). However, they were more likely to report sexual assault (AOR 7.36). The lifetime prevalence of PTSD was 6.6% and the conditional rate was 7.7%. Both lifetime and conditional PTSD rates were higher among female soldiers, but lower among the reserve forces, both male and female. Finally, the median duration of PTSD was negatively influenced by younger age of onset, but not influenced by whether the event occurred during deployment. Conclusions: Active members of the CAF report a high degree of trauma exposure but a moderate rate of lifetime PTSD. PMID:26720506

  11. Trauma Informed Guilt Reduction Therapy With Combat Veterans

    PubMed Central

    Norman, Sonya B.; Wilkins, Kendall C.; Myers, Ursula S.; Allard, Carolyn B.

    2014-01-01

    Guilt related to combat trauma is highly prevalent among veterans returning from Iraq and Afghanistan. Trauma-related guilt has been associated with increased risk for posttraumatic psychopathology and poorer response to treatment. Trauma Informed Guilt Reduction (TrIGR) therapy is a 4-module cognitive-behavioral psychotherapy designed to reduce guilt related to combat trauma. The goals of this study were to describe the key elements of TrIGR and report results of a pilot study with 10 recently deployed combat veterans. Ten combat veterans referred from a VA Posttraumatic Stress Disorder (PTSD) or mental health clinic completed TrIGR over 4 to 7 sessions. Nine veterans completed the posttreatment assessment. This initial pilot suggests that TrIGR may help to reduce trauma-related guilt severity and associated distress. Changes in trauma-related guilt were highly correlated with reductions in PTSD and depression symptoms over the course of treatment, suggesting a possible mechanistic link with severity of posttraumatic psychopathology. TrIGR warrants further evaluation as an intervention for reducing guilt related to traumatic experiences in combat. PMID:25404850

  12. Amorphous silicon thin films: The ultimate lightweight space solar cell

    NASA Technical Reports Server (NTRS)

    Vendura, G. J., Jr.; Kruer, M. A.; Schurig, H. H.; Bianchi, M. A.; Roth, J. A.

    1994-01-01

    Progress is reported with respect to the development of thin film amorphous (alpha-Si) terrestrial solar cells for space applications. Such devices promise to result in very lightweight, low cost, flexible arrays with superior end of life (EOL) performance. Each alpha-Si cell consists of a tandem arrangement of three very thin p-i-n junctions vapor deposited between film electrodes. The thickness of this entire stack is approximately 2.0 microns, resulting in a device of negligible weight, but one that must be mechanically supported for handling and fabrication into arrays. The stack is therefore presently deposited onto a large area (12 by 13 in), rigid, glass superstrate, 40 mil thick, and preliminary space qualification testing of modules so configured is underway. At the same time, a more advanced version is under development in which the thin film stack is transferred from the glass onto a thin (2.0 mil) polymer substrate to create large arrays that are truly flexible and significantly lighter than either the glassed alpha-Si version or present conventional crystalline technologies. In this paper the key processes for such effective transfer are described. In addition, both glassed (rigid) and unglassed (flexible) alpha-Si cells are studied when integrated with various advanced structures to form lightweight systems. EOL predictions are generated for the case of a 1000 W array in a standard, 10 year geosynchronous (GEO) orbit. Specific powers (W/kg), power densities (W/sq m) and total array costs ($/sq ft) are compared.

  13. Lightweight composite reflectors for space optics

    NASA Astrophysics Data System (ADS)

    Williams, Brian E.; McNeal, Shawn R.; Ono, Russell M.

    1998-01-01

    The primary goal of this work was to advance the state of the art in lightweight, high optical quality reflectors for space- and Earth-based telescopes. This was accomplished through the combination of a precision silicon carbide (SiC) reflector surface and a high specific strength, low-mass SiC structural support. Reducing the mass of components launched into space can lead to substantial cost savings, but an even greater benefit of lightweight reflectors for both space- and Earth-based optics applications is the fact that they require far less complex and less expensive positioning systems. While Ultramet is not the first company to produce SiC by chemical vapor deposition (CVD) for reflector surfaces, it is the first to propose and demonstrate a lightweight, open-cell SiC structural foam that can support a thin layer of the highly desirable polished SiC reflector material. SiC foam provides a substantial structural and mass advantage over conventional honeycomb supports and alternative finned structures. The result is a reflector component that meets or exceeds the optical properties of current high-quality glass, ceramic, and metal reflectors while maintaining a substantially lower areal density.

  14. Southern Regional Center for Lightweight Innovative Design

    SciTech Connect

    2012-08-24

    The Southern Regional Center for Lightweight Innovative Design (SRCLID) has developed an experimentally validated cradle-to-grave modeling and simulation effort to optimize automotive components in order to decrease weight and cost, yet increase performance and safety in crash scenarios. In summary, the three major objectives of this project are accomplished: To develop experimentally validated cradle-to-grave modeling and simulation tools to optimize automotive and truck components for lightweighting materials (aluminum, steel, and Mg alloys and polymer-based composites) with consideration of uncertainty to decrease weight and cost, yet increase the performance and safety in impact scenarios; To develop multiscale computational models that quantify microstructure-property relations by evaluating various length scales, from the atomic through component levels, for each step of the manufacturing process for vehicles; and To develop an integrated K-12 educational program to educate students on lightweighting designs and impact scenarios. In this final report, we divided the content into two parts: the first part contains the development of building blocks for the project, including materials and process models, process-structure-property (PSP) relationship, and experimental validation capabilities; the second part presents the demonstration task for Mg front-end work associated with USAMP projects.

  15. Silicon Carbide Technologies for Lightweighted Aerospace Mirrors

    NASA Astrophysics Data System (ADS)

    Matson, L.; Chen, M.; Deblonk, B.; Palusinski, I.

    The use of monolithic glass and beryllium to produce lightweighted aerospace mirror systems has reached its limits due to the long lead times, high processing costs, environmental effects and launch load/weight requirements. New material solutions and manufacturing processes are required to meet DoD's directed energy weapons, reconnaissance/surveillance, and secured communications needs. Over the past several years the Air Force, MDA, and NASA has focused their efforts on the fabrication, lightweighting, and scale-up of numerous silicon carbide (SiC) based materials. It is anticipated that SiC can be utilized for most applications from cryogenic to high temperatures. This talk will focus on describing the SOA for these (near term) SiC technology solutions for making mirror structural substrates, figuring and finishing technologies being investigated to reduce cost time and cost, and non-destructive evaluation methods being investigated to help eliminate risk. Mirror structural substrates made out of advanced engineered materials (far term solutions) such as composites, foams, and microsphere arrays for ultra lightweighting will also be briefly discussed.

  16. Trauma in the geriatric population.

    PubMed

    Maxwell, Cathy A

    2015-06-01

    Injury in older adults is a looming public health crisis. This article provides a broad overview of geriatric trauma across the continuum of care. After a review of the epidemiology of geriatric trauma, optimal approaches to patient care are presented for triage and transport, trauma team activation and initial assessment, inpatient management, and injury prevention. Special emphasis is given to assessment of frailty, advanced care planning, and transitions of care. PMID:25981722

  17. Global trauma: the great divide

    PubMed Central

    Paniker, Jayanth; Graham, Simon Matthew; Harrison, James William

    2015-01-01

    Road trauma is an emergent global issue. There is huge disparity between the population affected by road trauma and the resource allocation. If the current trend continues, a predicted extra 5 million lives will be lost in this decade. This article aims to create an awareness of the scale of the problem of road trauma and the inequality in the resources available to address this problem. It also describes the responses from the international organisations and the orthopaedic community in dealing with this issue. The International Orthopaedic community has a unique opportunity and moral obligation to play a part in changing this trend of global trauma. PMID:27163075

  18. Thin, lightweight electroacoustic projector for low frequency underwater applications

    NASA Astrophysics Data System (ADS)

    Tressler, James F.; Howarth, Thomas R.; Carney, Walter L.

    2004-09-01

    A thin, lightweight oil-filled electroacoustic projector has been designed and fabricated for application on unmanned underwater vehicles (UUVs) and autonomous unmanned vehicles (AUVs) used in littoral environments. The projector has dimensions of 381 mm×280 mm×64 mm and weighs 26 N in water. The acoustic aperture consists of 294 cymbal-type miniature Class V flextensional drivers. These 294 elements are divided into six independent modules of 49 cymbals wired together electrically in parallel. The six modules, in turn, are wired so that they can be easily combined together electrically either in parallel, series, or as a combination of both. Based on the VA power curve and a low duty cycle input voltage, an acoustic source level of at least 180 dB (re: 1 μPa at 1 m) is attainable across the frequency span ~3-15 kHz. This particular design is best suited for shallow water, but is shown to still be operable at water depths up to 200 meters without significant degradation in performance.

  19. A lightweight, high strength dexterous manipulator for commercial applications

    NASA Technical Reports Server (NTRS)

    Marzwell, Neville I.; Schena, Bruce M.; Cohan, Steve M.

    1991-01-01

    The concept, design, and features are described of a lightweight, high strength, modular robot manipulator being developed for space and commercial applications. The manipulator has seven fully active degrees of freedom and is fully operational in 1 G. Each of the seven joints incorporates a unique drivetrain design which provides zero backlash operation, is insensitive to wear, and is single fault tolerant to motor or servo amplifier failure. Feedback sensors provide position, velocity, torque, and motor winding temperature information at each joint. This sensing system is also designed to be single fault tolerant. The manipulator consists of five modules (not including gripper). These modules join via simple quick-disconnect couplings and self-mating connectors which allow rapid assembly and/or disassembly for reconfiguration, transport, or servicing. The manipulator is a completely enclosed assembly, with no exposed components or wires. Although the initial prototype will not be space qualified, the design is well suited to meeting space requirements. The control system provides dexterous motion by controlling the endpoint location and arm pose simultaneously. Potential applications are discussed.

  20. Effects of lightweight fly ash aggregate properties on the behavior of lightweight concretes.

    PubMed

    Kockal, Niyazi Ugur; Ozturan, Turan

    2010-07-15

    Influence of different lightweight fly ash aggregates on the behavior of concrete mixtures was discussed. The performance characteristics of lightweight concretes (LWCs) and normalweight concrete (NWC) were investigated through compressive strength, modulus of elasticity and splitting tensile strength representing the mechanical behavior; through rapid chloride permeability representing the transport properties and through rapid freezing and thawing cycling representing the durability of concrete. In order to investigate the aggregate-cement paste interfacial transition zone (ITZ), SEM observations were performed. Regression and graphical analysis of the experimental data obtained were also performed. An increase in compressive strength was observed with the increase in oven-dry density. The ratios of splitting tensile strength to compressive strength of lightweight aggregate concretes were found to be similar to that of normalweight concrete. All the 28- and 56-day concrete specimens had a durability factor greater than 85 and 90, respectively, which met the requirement for freezing and thawing durability. PMID:20399557

  1. Biomechanics of penetrating trauma.

    PubMed

    Yoganandan, N; Pintar, F A

    1997-01-01

    It is well known that injuries and deaths due to penetrating projectiles have become a national and an international epidemic in Western society. The application of biomedical engineering to solve day-to-day problems has produced considerable advances in safety and mitigation/prevention of trauma. The study of penetrating trauma has been largely in the military domain where war-time specific applications were advanced with the use of high-velocity weapons. With the velocity and weapon caliber in the civilian population at half or less compared with the military counterpart, wound ballistics is a largely different problem in today's trauma centers. The principal goal of the study of penetrating injuries in the civilian population is secondary prevention and optimized emergency care after occurrence. A thorough understanding of the dynamic biomechanics of penetrating injuries quantifies missile type, caliber, and velocity to hard and soft tissue damage. Such information leads to a comprehensive assessment of the acute and long-term treatment of patients with penetrating injuries. A review of the relevant military research applied to the civilian domain and presentation of new technology in the biomechanical study of these injuries offer foundation to this field. Relevant issues addressed in this review article include introduction of the military literature, the need for secondary prevention, environmental factors including projectile velocity and design, experimental studies with biological tissues and physical models, and mathematical simulations and analyses. Areas of advancement are identified that enables the pursuit of biomechanics research in order to arrive at better secondary prevention strategies. PMID:9719858

  2. Rural Trauma: Is Trauma Designation Associated with Better Hospital Outcomes?

    ERIC Educational Resources Information Center

    Bowman, Stephen M.; Zimmerman, Frederick J.; Sharar, Sam R.; Baker, Margaret W.; Martin, Diane P.

    2008-01-01

    Context: While trauma designation has been associated with lower risk of death in large urban settings, relatively little attention has been given to this issue in small rural hospitals. Purpose: To examine factors related to in-hospital mortality and delayed transfer in small rural hospitals with and without trauma designation. Methods: Analysis…

  3. Trauma-Focused CBT for Youth with Complex Trauma

    ERIC Educational Resources Information Center

    Cohen, Judith A.; Mannarino, Anthony P.; Kliethermes, Matthew; Murray, Laura A.

    2012-01-01

    Objectives: Many youth develop complex trauma, which includes regulation problems in the domains of affect, attachment, behavior, biology, cognition, and perception. Therapists often request strategies for using evidence-based treatments (EBTs) for this population. This article describes practical strategies for applying Trauma-Focused Cognitive…

  4. Trauma-focused CBT for youth with complex trauma

    PubMed Central

    Mannarino, Anthony P.; Kliethermes, Matthew; Murray, Laura A.

    2013-01-01

    Objectives Many youth develop complex trauma, which includes regulation problems in the domains of affect, attachment, behavior, biology, cognition, and perception. Therapists often request strategies for using evidence-based treatments (EBTs) for this population. This article describes practical strategies for applying Trauma-Focused Cognitive Behavioral Therapy (TF-CBT) for youth with complex trauma. Methods TF-CBT treatment phases are described and modifications of timing, proportionality and application are described for youth with complex trauma. Practical applications include a) dedicating proportionally more of the model to the TF-CBT coping skills phase; b) implementing the TF-CBT Safety component early and often as needed throughout treatment; c) titrating gradual exposure more slowly as needed by individual youth; d) incorporating unifying trauma themes throughout treatment; and e) when indicated, extending the TF-CBT treatment consolidation and closure phase to include traumatic grief components and to generalize ongoing safety and trust. Results Recent data from youth with complex trauma support the use of the above TF-CBT strategies to successfully treat these youth. Conclusions The above practical strategies can be incorporated into TF-CBT to effectively treat youth with complex trauma. Practice implications Practical strategies include providing a longer coping skills phase which incorporates safety and appropriate gradual exposure; including relevant unifying themes; and allowing for an adequate treatment closure phase to enhance ongoing trust and safety. Through these strategies therapists can successfully apply TF-CBT for youth with complex trauma. PMID:22749612

  5. Radiology of skeletal trauma

    SciTech Connect

    Rogers, L.F.

    1982-01-01

    This 1000-page book contains over 1700 illustrations, is presented in two volumes and subdivided into 23 chapters. After brief chapters of Introduction and General Anatomy, a section on Skeletal Biomechanics is presented. The Epidemiology of Fractures chapter examines, among other things, the effects of age on the frequency and distribution of fractures. In the chapter on Classifications of Fractures, the author describes the character of traumatic forces such as angulating, torsional, avulsive, and compressive, and then relates these to the resultant fracture configurations. The Fracture Treatment chapter presents an overview of treatment principles. Other chapters deal with specific problems in pediatric trauma, fracture healing and nonhealing, and fracture complications.

  6. Management of Pediatric Trauma.

    PubMed

    2016-08-01

    Injury is still the number 1 killer of children ages 1 to 18 years in the United States (http://www.cdc.gov/nchs/fastats/children.htm). Children who sustain injuries with resulting disabilities incur significant costs not only for their health care but also for productivity lost to the economy. The families of children who survive childhood injury with disability face years of emotional and financial hardship, along with a significant societal burden. The entire process of managing childhood injury is enormously complex and varies by region. Only the comprehensive cooperation of a broadly diverse trauma team will have a significant effect on improving the care of injured children. PMID:27456509

  7. Management of Colorectal Trauma

    PubMed Central

    2011-01-01

    Although the treatment strategy for colorectal trauma has advanced during the last part of the twentieth century and the result has improved, compared to other injuries, problems, such as high septic complication rates and mortality rates, still exist, so standard management for colorectal trauma is still a controversial issue. For that reason, we designed this article to address current recommendations for management of colorectal injuries based on a review of literature. According to the reviewed data, although sufficient evidence exists for primary repair being the treatment of choice in most cases of nondestructive colon injuries, many surgeons are still concerned about anastomotic leakage or failure, and prefer to perform a diverting colostomy. Recently, some reports have shown that primary repair or resection and anastomosis, is better than a diverting colostomy even in cases of destructive colon injuries, but it has not fully established as the standard treatment. The same guideline as that for colonic injury is applied in cases of intraperitoneal rectal injuries, and, diversion, primary repair, and presacral drainage are regarded as the standards for the management of extraperitoneal rectal injuries. However, some reports state that primary repair without a diverting colostomy has benefit in the treatment of extraperitoneal rectal injury, and presacral drainage is still controversial. In conclusion, ideally an individual management strategy would be developed for each patient suffering from colorectal injury. To do this, an evidence-based treatment plan should be carefully developed. PMID:21980586

  8. Sexual Trauma, Spirituality, and Psychopathology

    ERIC Educational Resources Information Center

    Krejci, Mark J.; Thompson, Kevin M.; Simonich, Heather; Crosby, Ross D.; Donaldson, Mary Ann; Wonderlich, Stephen A.; Mitchell, James E.

    2004-01-01

    This study assessed the association between spirituality and psychopathology in a group of sexual abuse victims and controls with a focus on whether spirituality moderated the association between sexual trauma and psychopathology. Seventy-one sexual trauma victims were compared to 25 control subjects on spiritual well-being, the Eating Disorder…

  9. Coagulopathy after severe pediatric trauma.

    PubMed

    Christiaans, Sarah C; Duhachek-Stapelman, Amy L; Russell, Robert T; Lisco, Steven J; Kerby, Jeffrey D; Pittet, Jean-François

    2014-06-01

    Trauma remains the leading cause of morbidity and mortality in the United States among children aged 1 to 21 years. The most common cause of lethality in pediatric trauma is traumatic brain injury. Early coagulopathy has been commonly observed after severe trauma and is usually associated with severe hemorrhage and/or traumatic brain injury. In contrast to adult patients, massive bleeding is less common after pediatric trauma. The classical drivers of trauma-induced coagulopathy include hypothermia, acidosis, hemodilution, and consumption of coagulation factors secondary to local activation of the coagulation system after severe traumatic injury. Furthermore, there is also recent evidence for a distinct mechanism of trauma-induced coagulopathy that involves the activation of the anticoagulant protein C pathway. Whether this new mechanism of posttraumatic coagulopathy plays a role in children is still unknown. The goal of this review is to summarize the current knowledge on the incidence and potential mechanisms of coagulopathy after pediatric trauma and the role of rapid diagnostic tests for early identification of coagulopathy. Finally, we discuss different options for treating coagulopathy after severe pediatric trauma. PMID:24569507

  10. Laser Additive Manufacturing and Bionics: Redefining Lightweight Design

    NASA Astrophysics Data System (ADS)

    Emmelmann, C.; Sander, P.; Kranz, J.; Wycisk, E.

    New layer wise manufacturing technologies such as Laser Additive Manufacturing (LAM) allow innovative approaches to product design. Especially for lightweight design in aircraft applications LAM offers new possibilities for load-adapted structures. However, to fully capture lightweight potential of LAM technologies new design guidelines and processes have to be developed. A novel approach to extreme lightweight design is realized by incorporating structural optimization tools, bionic structures and LAM guidelines into one design process. By consequently following this design process designers can achieve lightweight savings in designing new aircraft structures.

  11. Precise Alignment and Permanent Mounting of Thin and Lightweight X-ray Segments

    NASA Technical Reports Server (NTRS)

    Biskach, Michael P.; Chan, Kai-Wing; Hong, Melinda N.; Mazzarella, James R.; McClelland, Ryan S.; Norman, Michael J.; Saha, Timo T.; Zhang, William W.

    2012-01-01

    To provide observations to support current research efforts in high energy astrophysics. future X-ray telescope designs must provide matching or better angular resolution while significantly increasing the total collecting area. In such a design the permanent mounting of thin and lightweight segments is critical to the overall performance of the complete X-ray optic assembly. The thin and lightweight segments used in the assemhly of the modules are desigued to maintain and/or exceed the resolution of existing X-ray telescopes while providing a substantial increase in collecting area. Such thin and delicate X-ray segments are easily distorted and yet must be aligned to the arcsecond level and retain accurate alignment for many years. The Next Generation X-ray Optic (NGXO) group at NASA Goddard Space Flight Center has designed, assembled. and implemented new hardware and procedures mth the short term goal of aligning three pairs of X-ray segments in a technology demonstration module while maintaining 10 arcsec alignment through environmental testing as part of the eventual design and construction of a full sized module capable of housing hundreds of X-ray segments. The recent attempts at multiple segment pair alignment and permanent mounting is described along with an overview of the procedure used. A look into what the next year mll bring for the alignment and permanent segment mounting effort illustrates some of the challenges left to overcome before an attempt to populate a full sized module can begin.

  12. Prehospital Trauma Care in Singapore.

    PubMed

    Ho, Andrew Fu Wah; Chew, David; Wong, Ting Hway; Ng, Yih Yng; Pek, Pin Pin; Lim, Swee Han; Anantharaman, Venkataraman; Hock Ong, Marcus Eng

    2015-01-01

    Prehospital emergency care in Singapore has taken shape over almost a century. What began as a hospital-based ambulance service intended to ferry medical cases was later complemented by an ambulance service under the Singapore Fire Brigade to transport trauma cases. The two ambulance services would later combine and come under the Singapore Civil Defence Force. The development of prehospital care systems in island city-state Singapore faces unique challenges as a result of its land area and population density. This article defines aspects of prehospital trauma care in Singapore. It outlines key historical milestones and current initiatives in service, training, and research. It makes propositions for the future direction of trauma care in Singapore. The progress Singapore has made given her circumstances may serve as lessons for the future development of prehospital trauma systems in similar environments. Key words: Singapore; trauma; prehospital emergency care; emergency medical services. PMID:25494913

  13. Lightweight, Fire-Resistant Graphite Composites

    NASA Technical Reports Server (NTRS)

    Kourtides, D. A.; Parker, J. A.; MING-TA-HSU

    1986-01-01

    Aircraft safety improved with interior paneling made of new laminate with good thermophysical properties. Featuring lightweight graphite composite, laminate more heat-and flame-resistant and produces much less smoke in fire than commonly used epoxy-resin-containing laminates. New laminate prepared without epoxy resin. Graphite unidirectional cloth preimpregnated with blend of vinyl polystyrylpyridine and bismaleimide (VPSP-BMI). Either of two types of VPSP-BMI blend used, depending on method of preparation of chemicals and technique used to fabricate panel.

  14. ZERODUR for lightweight secondary/tertiary mirrors

    NASA Astrophysics Data System (ADS)

    Morian, Hans F.; Mackh, Reiner

    1998-08-01

    ZERODUR, the glass ceramic, with CTE values near zero, has excellent performance up to 8.2 m primary mirrors as well as for lightweight (LW) mirrors for Secondaries and Tertiaries. The high homogeneity of major properties of ZERODUR is an important prerequisite for the LW production and application. The production of CNC grinding and subsequent lightening via acid etching for additional weight reduction will be discussed. Results of Secondary and Tertiary LW mirrors for advanced technology telescopes like 8 m, 6.5 m and 3.5 m telescopes will be addressed. This paper presents also some examples of space based satellites with LW Zerodur mirrors in use since several years.

  15. Radiation Transmission Measurements for a Lightweight Fabric

    SciTech Connect

    Friedman, H; Singh, M S; DeMeo, R F

    2003-01-17

    Radiation Shield Technologies has developed a lightweight fabric, shown in Fig. 1, with radiation shielding properties for X ray, gamma ray and beta particle emissions in the range of energies relevant to clinical and Homeland Security applications. Detailed measurements were done to measure the shielding properties of this material against the spectra of standard radionuclides and x-ray generators. The mass attenuation coefficients were calculated using LLNL cross section data, a 3-D photon transport code, elemental weight fractions and the measured density of the fabric.

  16. Lightweight Forms for Epoxy/Aramid Ducts

    NASA Technical Reports Server (NTRS)

    Mix, E. W.; Anderson, A. N.; Bedford, Donald L., Sr.

    1986-01-01

    Aluminum mandrels easy to remove. Lightweight aluminum mandrel for shaping epoxy/aramid ducts simplifies and speeds production. In new process, glass-reinforced epoxy/aramid cloth wrapped on aluminum mandrel. Stainless-steel flanges and other hardware fitted on duct and held by simple tooling. Entire assembly placed in oven to cure epoxy. After curing, assembly placed in alkaline bath dissolves aluminum mandrel in about 4 hours. Epoxy/aramid shell ready for use as duct. Aluminum mandrel used to make ducts of various inside diameters up to 6 in. Standard aluminum forms used. Conventional tube-bending equipment produces requisite curves in mandrels.

  17. A Light-Weight Instrumentation System Design

    SciTech Connect

    Kidner, Ronald

    1999-06-02

    To meet challenging constraints on telemetry system weight and volume, a custom Light-Weight Instrumentation System was developed to collect vehicle environment and dynamics on a short-duration exo-atmospheric flight test vehicle. The total telemetry system, including electronics, sensors, batteries, and a 1 watt transmitter weighs about 1 kg. Over 80 channels of measurement, housekeeping, and telemetry system diagnostic data are transmitted at 128 kbps. The microcontroller-based design uses the automotive industry standard Controller Area Network to interface with and support in-flight control fimctions. Operational parameters are downloaded via a standard asynchronous serial communications intefiace. The basic design philosophy and functionality is described here.

  18. Penetrating abdominal trauma.

    PubMed

    Henneman, P L

    1989-08-01

    The management of patients with penetrating abdominal trauma is outlined in Figure 1. Patients with hemodynamic instability, evisceration, significant gastrointestinal bleeding, peritoneal signs, gunshot wounds with peritoneal violation, and type 2 and 3 shotgun wounds should undergo emergency laparotomy. The initial ED management of these patients includes airway management, monitoring of cardiac rhythm and vital signs, history, physical examination, and placement of intravenous lines. Blood should be obtained for initial hematocrit, type and cross-matching, electrolytes, and an alcohol level or drug screen as needed. Initial resuscitation should utilize crystalloid fluid replacement. If more than 2 liters of crystalloid are needed to stabilize an adult (less in a child), blood should be given. Group O Rh-negative packed red blood cells should be immediately available for a patient in impending arrest or massive hemorrhage. Type-specific blood should be available within 15 minutes. A patient with penetrating thoracic and high abdominal trauma should receive a portable chest x-ray, and a hemo- or pneumothorax should be treated with tube thoracostomy. An unstable patient with clinical signs consistent with a pneumothorax, however, should receive a tube thoracostomy prior to obtaining roentgenographic confirmation. If time permits, a nasogastric tube and Foley catheter should be placed, and the urine evaluated for blood (these procedures can be performed in the operating room). If kidney involvement is suspected because of hematuria or penetrating trauma in the area of a kidney or ureter in a patient requiring surgery, a single-shot IVP should be performed either in the ED or the operating room. An ECG is important in patients with possible cardiac involvement and in patients over the age of 40 going to the operating room. Tetanus status should be updated, and appropriate antibiotics covering bowel flora should be given. Operative management should rarely be delayed

  19. Vascular trauma historical notes.

    PubMed

    Rich, Norman M

    2011-03-01

    This article provides a brief historical review of treatment of vascular trauma. Although methods for ligation came into use in the second century, this knowledge was lost during the Dark Ages and did not come back until the Renaissance. Many advances in vascular surgery occurred during the Balkan Wars, World War I, and World War II, although without antibiotics and blood banking, the philosophy of life over limb still ruled. Documenting and repairing both arteries and veins became more common during the Korean and Vietnam conflicts. Increased documentation has revealed that the current conflicts have resulted in more arterial injuries than in previous wars, likely because of improved body armor, improvised explosive device attacks, tourniquet use, and improved medical evacuation time. This brief review emphasizes the great value of mentorship and the legacy of the management of arterial and venous injuries to be passed on. PMID:21502112

  20. [MUSCULOSKELETAL MARKERS, ARTHROPATY, TRAUMAS].

    PubMed

    Caldarini, Carla; Zavaroni, Federica; Benassi, Valentina

    2015-01-01

    The bone tissue remodeling due to strong physical/working activity is defined as ergonomic markers or MSM (Muscoloskeletal Stress Markers) (Capasso et al. 1999) and MOS (Markers of Occupational Stress). Among them we can find: enthesopaties, arthropaties, non metrical stress and traumas markers. In the present study, the analysis of these traits has been used to clarify habitual activity patterns of four imperial populations from Suburbium: Castel Malnome, Casal Bertone area Q, Via Padre Semeria e Quarto Cappello del Prete. The very high prevalence of activity-induced stress lesions occurred among the individuals of Castel Malnome and Casal Bertone area Q suggests that these groups were involved in strenuous occupations such as, respectively: the processing and storage of salt and the dyeing of textiles and hides discernible from the archaeological context. For the individuals of Via Padre Semeria and Quarto Cappello del Prete the alterations, instead, could be compatibles with agricultural work. PMID:27348990

  1. Trauma and religiousness.

    PubMed

    Gostečnik, Christian; Repič Slavič, Tanja; Lukek, Saša Poljak; Cvetek, Robert

    2014-06-01

    Victims of traumatic events who experience re-traumatization often develop a highly ambivalent relationship to God and all religiosity as extremely conflictual. On the one hand, they may choose to blame God for not having protected them, for having left them to feel so alone, for having been indifferent to them or they may even turn their wrath upon God, as the source of cruelty. Often though, the traumas experienced by individuals prompt them to turn to God and religion in search of help. This gives reason for the need of new and up-to-date research that can help elucidate why some people choose to seek help in religion and others turn away from it. PMID:23187617

  2. A Lightweight Vertical Rosette for Deployment in Ice Covered Water

    NASA Astrophysics Data System (ADS)

    Smethie, W. M.; Chayes, D. N.; Perry, R. S.; Schlosser, P.

    2009-12-01

    Although remote sensing technology provides measurement capability for a number of water properties, there are important substances for which this technology does not currently exist and the only way to measure these substances is to collect water samples and return the samples to the lab. In the Arctic Ocean water samples are difficult to obtain from ships because of the extensive ice cover and thick pressure ridges. However, the ice provides a landing platform for aircraft, which can rapidly cover long distances. Aircraft have been used for sampling the Arctic Ocean for the past half-century using bottles and internally recording CTDs attached to a cable and lowered through leads or holes drilled in the ice. The routine CTD/rosette technology used for sampling from ships measures profiles of temperature, salinity, oxygen as well as other substances in situ, displays the data in real time for choosing depths to obtain water samples and the water samples are then collected with the rosette. These systems are too heavy and bulky to deploy from aircraft. We have developed a lightweight modular CTD/rosette system that is deployed through a 12-inch diameter hole drilled in the ice. The modules are connected together physically and electrically with the water bottle modules, which contain four 4-liter bottles each, stacked on top of the CTD module. The CTD traces are displayed on a laptop computer and the bottles are tripped using modified Seabird controllers and a melt-lanyard tripping mechanism. We have used this system for several years with Twin Otter fixed wing aircraft as part of the Switchyard Project, sampling a line of stations annually in the heavily ice covered region between Alert and the North Pole. Casts are carried out in a tent connected to the airplane using a lightweight winch mounted in the airplane. At the completion of a cast, the water modules are placed in a cooler with bags of snow to provide thermal stability at about 0°C and the end caps

  3. FKBP5 genotype interacts with early life trauma to predict heavy drinking in college students.

    PubMed

    Lieberman, Richard; Armeli, Stephen; Scott, Denise M; Kranzler, Henry R; Tennen, Howard; Covault, Jonathan

    2016-09-01

    Alcohol use disorder (AUD) is debilitating and costly. Identification and better understanding of risk factors influencing the development of AUD remain a research priority. Although early life exposure to trauma increases the risk of adulthood psychiatric disorders, including AUD, many individuals exposed to early life trauma do not develop psychopathology. Underlying genetic factors may contribute to differential sensitivity to trauma experienced in childhood. The hypothalamic-pituitary-adrenal (HPA) axis is susceptible to long-lasting changes in function following childhood trauma. Functional genetic variation within FKBP5, a gene encoding a modulator of HPA axis function, is associated with the development of psychiatric symptoms in adulthood, particularly among individuals exposed to trauma early in life. In the current study, we examined interactions between self-reported early life trauma, past-year life stress, past-year trauma, and a single nucleotide polymorphism (rs1360780) in FKBP5 on heavy alcohol consumption in a sample of 1,845 college students from two university settings. Although we found no effect of early life trauma on heavy drinking in rs1360780*T-allele carriers, rs1360780*C homozygotes exposed to early life trauma had a lower probability of heavy drinking compared to rs1360780*C homozygotes not exposed to early life trauma (P < 0.01). The absence of an interaction between either current life stress or past-year trauma, and FKBP5 genotype on heavy drinking suggests that there exists a developmental period of susceptibility to stress that is moderated by FKBP5 genotype. These findings implicate interactive effects of early life trauma and FKBP5 genetic variation on heavy drinking. © 2016 Wiley Periodicals, Inc. PMID:27196697

  4. A comparison of performance of lightweight mirrors

    NASA Technical Reports Server (NTRS)

    Cho, Myung K.; Richard, Ralph M.; Hileman, Edward A.

    1990-01-01

    Four lightweight solid contoured back mirror shapes (a double arch, a single arch, a modified single arch, and a double concave mirror) and a cellular sandwich lightweight meniscus mirror, have been considered for the primary mirror of the Space Infrared Telescope Facility (SIRTF). A parametric design study using these shapes for the SIRTF 40 inch primary mirror with a focal ratio f/2 is presented. Evaluations of the optical performance and fundamental frequency analyses are performed to compare relative merits of each mirror configuration. Included in these are structural, optical, and frequency analyses for (1) different back contour shapes, (2) different number and location of the support points, and (3) two gravity orientations (ZENITH and HORIZON positions). The finite element program NASTRAN is used to obtain the structural deflections of the optical surface. For wavefront error analysis, FRINGE and PCFRINGE programs are used to evaluate the optical performance. A scaling law relating the optical and structural performance for various mirror contoured back shapes is developed.

  5. An extremely wideband and lightweight metamaterial absorber

    PubMed Central

    Shen, Yang; Pei, Zhibin; Pang, Yongqiang; Wang, Jiafu; Zhang, Anxue; Qu, Shaobo

    2015-01-01

    This paper presents a three-dimensional microwave metamaterial absorber based on the stand-up resistive film patch array. The absorber has wideband absorption, lightweight, and polarization-independent properties. Our design comes from the array of unidirectional stand-up resistive film patches backed by a metallic plane, which can excite multiple standing wave modes. By rolling the resistive film patches as a square enclosure, we obtain the polarization-independent property. Due to the multiple standing wave modes, the most incident energy is dissipated by the resistive film patches, and thus, the ultra-wideband absorption can be achieved by overlapping all the absorption modes at different frequencies. Both the simulated and experimental results show that the absorber possesses a fractional bandwidth of 148.2% with the absorption above 90% in the frequency range from 3.9 to 26.2 GHz. Moreover, the proposed absorber is extremely lightweight. The areal density of the fabricated sample is about 0.062 g/cm2, which is approximately equivalent to that of eight stacked standard A4 office papers. It is expected that our proposed absorber may find potential applications such as electromagnetic interference and stealth technologies. PMID:26130845

  6. Lightweight, Segmented, Mostly Silicon Telescope Mirror

    NASA Technical Reports Server (NTRS)

    Yang, Eui-Hyeok

    2006-01-01

    A document presents the concept of a curved telescope primary reflector structure, made mostly of silicon, that would have an areal mass density 1 kg/m2 and would be deployed in outer space, where it would be operated at a temperature in the cryogenic range. The concept provides for adjustment of the shape of the mirror to maintain the required precise optical surface figure despite the flexibility inherent in the ultra-lightweight design. The structure would include a thin mirror layer divided into hexagonal segments supported by flexure hinges on a lightweight two-layer backing structure. Each segment would also be supported at three points by sets of piezoelectric linear microactuators that could impose small displacements along the optical axis. The excitations applied to the aforementioned microactuators would be chosen to effect fine adjustments of the axial positions and the orientations of the segments relative to the supporting structure. Other piezoelectric linear microactuators embedded in the backing structure would enable control of the displacements of the segments along the hexagonal axes; they would also enable control of the curvature of the backing structure and, thus, additional control of the curvature of the reflector.

  7. Advanced lightweight optics development for space applications

    SciTech Connect

    Bilbro, James W.

    1998-01-15

    A considerable amount of effort over the past year has been devoted to exploring ultra-lightweight optics for two specific NASA programs, the Next Generation Space Telescope (NGST), and the High Throughput X-ray Spectrometer (HTXS). Experimental investigations have been undertaken in a variety of materials including glass, composites, nickel, beryllium, Carbon fiber reinforced Silicon Carbide (CSiC), Reaction Bonded Silicon Carbide, Chemical Vapor Deposited Silicon Carbide, and Silicon. Overall results of these investigations will be summarized, and specific details will be provided concerning the in-house development of ultra-lightweight nickel replication for both grazing incidence and normal incidence optics. This will include x-ray test results of the grazing incidence optic and cryogenic test results of the normal incidence optic. The status of two 1.5 meter diameter demonstration mirrors for NGST will also be presented. These two demonstrations are aimed at establishing the capability to manufacture and test mirrors that have an areal density of 15 kilograms per square meter. Efforts in thin membrane mirrors and Fresnel lenses will also be briefly discussed.

  8. Advanced lightweight optics development for space applications

    NASA Astrophysics Data System (ADS)

    Bilbro, James W.

    1998-01-01

    A considerable amount of effort over the past year has been devoted to exploring ultra-lightweight optics for two specific NASA programs, the Next Generation Space Telescope (NGST), and the High Throughput X-ray Spectrometer (HTXS). Experimental investigations have been undertaken in a variety of materials including glass, composites, nickel, beryllium, Carbon fiber reinforced Silicon Carbide (CSiC), Reaction Bonded Silicon Carbide, Chemical Vapor Deposited Silicon Carbide, and Silicon. Overall results of these investigations will be summarized, and specific details will be provided concerning the in-house development of ultra-lightweight nickel replication for both grazing incidence and normal incidence optics. This will include x-ray test results of the grazing incidence optic and cryogenic test results of the normal incidence optic. The status of two 1.5 meter diameter demonstration mirrors for NGST will also be presented. These two demonstrations are aimed at establishing the capability to manufacture and test mirrors that have an areal density of 15 kilograms per square meter. Efforts in thin membrane mirrors and Fresnel lenses will also be briefly discussed.

  9. Light-weight black ceramic insulation

    NASA Technical Reports Server (NTRS)

    Hsu, Ming-Ta S. (Inventor); Chen, Timothy S. (Inventor)

    2003-01-01

    Ultra-high temperature, light-weight, black ceramic insulation having a density ranging from about 0.12 g/cc. to 0.6 g/cc. such as ceramic tile is obtained by pyrolyzing siloxane gels derived from the reaction of at least one organo dialkoxy silane and at least one tetralkoxy silane in an acid or base liquid medium. The reaction mixture of the tetra- and dialkoxy silanes also may contain an effective amount of a mono- or trialkoxy silane to obtain the siloxane gels. The siloxane gels are dried at ambient temperatures and pressures to form siloxane ceramic precursors without significant shrinkage. The siloxane ceramic precursors are subsequently pyrolyzed, in an inert atmosphere, to form the black ceramic insulation comprising atoms of silicon, carbon and oxygen. The ceramic insulation can be characterized as a porous, uniform ceramic tile resistant to oxidation at temperatures ranging as high as 1700.degree. C., and particularly useful as lightweight tiles for spacecraft and other high-temperature insulation applications.

  10. Lightweight Community-Driven Ontology Evolution

    NASA Astrophysics Data System (ADS)

    Siorpaes, Katharina

    Only few well-maintained domain ontologies can be found on the Web. The likely reasons for the lack of useful domain ontologies include that (1) informal means to convey intended meaning more efficiently are used for ontology specification only to a very limited extent, (2) many relevant domains of discourse show a substantial degree of conceptual dynamics, (3) ontology representation languages are hard to understand for the majority of (potential) ontology users and domain experts, and (4) the community does not have control over the ontology evolution. In this thesis, we propose to (1) ground a methodology for community-grounded ontology building on the culture and philosophy of wikis by giving users who have no or little expertise in ontology engineering the opportunity to contribute in all stages of the ontology lifecycle and (2) exploit the combination of human and computational intelligence to discover and resolve inconsistencies and align lightweight domain ontologies. The contribution of this thesis is a methodology and prototype for community-grounded building and evolution of lightweight domain ontologies.

  11. An extremely wideband and lightweight metamaterial absorber

    NASA Astrophysics Data System (ADS)

    Shen, Yang; Pei, Zhibin; Pang, Yongqiang; Wang, Jiafu; Zhang, Anxue; Qu, Shaobo

    2015-06-01

    This paper presents a three-dimensional microwave metamaterial absorber based on the stand-up resistive film patch array. The absorber has wideband absorption, lightweight, and polarization-independent properties. Our design comes from the array of unidirectional stand-up resistive film patches backed by a metallic plane, which can excite multiple standing wave modes. By rolling the resistive film patches as a square enclosure, we obtain the polarization-independent property. Due to the multiple standing wave modes, the most incident energy is dissipated by the resistive film patches, and thus, the ultra-wideband absorption can be achieved by overlapping all the absorption modes at different frequencies. Both the simulated and experimental results show that the absorber possesses a fractional bandwidth of 148.2% with the absorption above 90% in the frequency range from 3.9 to 26.2 GHz. Moreover, the proposed absorber is extremely lightweight. The areal density of the fabricated sample is about 0.062 g/cm2, which is approximately equivalent to that of eight stacked standard A4 office papers. It is expected that our proposed absorber may find potential applications such as electromagnetic interference and stealth technologies.

  12. Missed injuries in trauma patients: A literature review

    PubMed Central

    Pfeifer, Roman; Pape, Hans-Christoph

    2008-01-01

    Background Overlooked injuries and delayed diagnoses are still common problems in the treatment of polytrauma patients. Therefore, ongoing documentation describing the incidence rates of missed injuries, clinically significant missed injuries, contributing factors and outcome is necessary to improve the quality of trauma care. This review summarizes the available literature on missed injuries, focusing on overlooked muscoloskeletal injuries. Methods Manuscripts dealing with missed injuries after trauma were reviewed. The following search modules were selected in PubMed: Missed injuries, Delayed diagnoses, Trauma, Musculoskeletal injuires. Three time periods were differentiated: (n = 2, 1980–1990), (n = 6, 1990–2000), and (n = 9, 2000-Present). Results We found a wide spread distribution of missed injuries and delayed diagnoses incidence rates (1.3% to 39%). Approximately 15 to 22.3% of patients with missed injuries had clinically significant missed injuries. Furthermore, we observed a decrease of missed pelvic and hip injuries within the last decade. Conclusion The lack of standardized studies using comparable definitions for missed injuries and clinically significant missed injuries call for further investigations, which are necessary to produce more reliable data. Furthermore, improvements in diagnostic techniques (e.g. the use of multi-slice CT) may lead to a decreased incidence of missed pelvic injuries. Finally, the standardized tertiary trauma survey is vitally important in the detection of clinically significant missed injuries and should be included in trauma care. PMID:18721480

  13. TRAUMA AND IMMUNE RESPONSE – EFFECT OF GENDER DIFFERENCES

    PubMed Central

    Choudhry, Mashkoor A.; Bland, Kirby I.; Chaudry, Irshad H.

    2009-01-01

    A major consequence of traumatic injury is the immunosuppression. Findings from previous studies suggest that the depression of immune functions is severe in young males, ovariectomized and aged females. In contrast, the immune functions in proestrus females following trauma-hemorrhage are maintained. Studies have also shown that the survival rate in proestrus females following trauma-hemorrhage and the induction of subsequent sepsis is significantly higher than in age-matched males and ovariectomized females. Furthermore, administration of female sex hormone 17β-estradiol in males and ovariectomized females after trauma-hemorrhage prevents the suppression of immune response. Thus, these findings suggest that sex hormones play a significant role in shaping the host response following trauma. This article reviews studies delineating the mechanism by which sex hormones regulate immune cell functions in the experimental model of trauma-hemorrhage. The findings from the studies reviewed in this article suggest that sex steroids can be synthesized by the immune cell. The findings further indicate that T cell and macrophages express receptors for androgen and estrogen. Since these cells are also the cells that produce cytokines, local synthesis of active steroids in these cells may become the significant factor in modulating their cytokine production. PMID:18048037

  14. An ecological view of psychological trauma and trauma recovery.

    PubMed

    Harvey, M R

    1996-01-01

    This paper presents an ecological view of psychological trauma and trauma recovery. Individual differences in posttraumatic response and recovery are the result of complex interactions among person, event, and environmental factors. These interactions define the interrelationship of individual and community and together may foster or impede individual recovery. The ecological model proposes a multidimensional definition of trauma recovery and suggests that the efficacy of trauma-focused interventions depends on the degree to which they enhance the person-community relationship and achieve "ecological fit" within individually varied recovery contexts. In attending to the social, cultural and political context of victimization and acknowledging that survivors of traumatic experiences may recover without benefit of clinical intervention, the model highlights the phenomenon of resiliency, and the relevance of community intervention efforts. PMID:8750448

  15. 46 CFR 30.10-38 - Lightweight-TB/ALL.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Lightweight-TB/ALL. 30.10-38 Section 30.10-38 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS GENERAL PROVISIONS Definitions § 30.10-38 Lightweight—TB/ALL. The term lightweight means the displacement of a vessel in metric tons without cargo,...

  16. 46 CFR 30.10-38 - Lightweight-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Lightweight-TB/ALL. 30.10-38 Section 30.10-38 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS GENERAL PROVISIONS Definitions § 30.10-38 Lightweight—TB/ALL. The term lightweight means the displacement of a vessel in metric tons without cargo,...

  17. 46 CFR 30.10-38 - Lightweight-TB/ALL.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Lightweight-TB/ALL. 30.10-38 Section 30.10-38 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS GENERAL PROVISIONS Definitions § 30.10-38 Lightweight—TB/ALL. The term lightweight means the displacement of a vessel in metric tons without cargo,...

  18. 46 CFR 30.10-38 - Lightweight-TB/ALL.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false Lightweight-TB/ALL. 30.10-38 Section 30.10-38 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS GENERAL PROVISIONS Definitions § 30.10-38 Lightweight—TB/ALL. The term lightweight means the displacement of a vessel in metric tons without cargo,...

  19. 46 CFR 30.10-38 - Lightweight-TB/ALL.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 1 2013-10-01 2013-10-01 false Lightweight-TB/ALL. 30.10-38 Section 30.10-38 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS GENERAL PROVISIONS Definitions § 30.10-38 Lightweight—TB/ALL. The term lightweight means the displacement of a vessel in metric tons without cargo,...

  20. FY2014 Lightweight Materials R&D Annual Progress Report

    SciTech Connect

    2015-03-01

    The Lightweight Materials research and development (R&D) area within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing lightweight materials for passenger and commercial vehicles.

  1. Immunohistochemical alterations after muscle trauma.

    PubMed

    Fechner, G; Bajanowski, T; Brinkmann, B

    1993-01-01

    The proteins fibrin, fibrinogen, fibronectin and complement C5b-9 were investigated in mechanically damaged skeletal muscle. An accumulation of fibrin, fibrinogen and fibronectin could be observed immediately after intra-vital trauma in damaged fibre zones, later an accumulation at the torn edges of the fibres. The accumulation of complement C5b-9 began one hour after trauma. After post mortem trauma no positive reactions could be observed for any of the proteins. The degree of expression of these proteins can therefore be used to differentiate between vital and postmortem muscle damage as well as the estimation of wound age in the early antemortem time period. PMID:8431399

  2. Computed tomography in trauma: An atlas approach

    SciTech Connect

    Toombs, B.D.; Sandler, C.

    1986-01-01

    This book discussed computed tomography in trauma. The text is organized according to mechanism of injury and site of injury. In addition to CT, some correlation with other imaging modalities is included. Blunt trauma, penetrating trauma, complications and sequelae of trauma, and use of other modalities are covered.

  3. Secondary Trauma in Children and School Personnel

    ERIC Educational Resources Information Center

    Motta, Robert W.

    2012-01-01

    A review of childhood secondary trauma is presented. Secondary trauma involves the transfer and acquisition of negative affective and dysfunctional cognitive states due to prolonged and extended contact with others, such as family members, who have been traumatized. As such, secondary trauma refers to a spread of trauma reactions from the victim…

  4. Implementation and Evaluation of a Ward-Based eLearning Program for Trauma Patient Management.

    PubMed

    Curtis, Kate; Wiseman, Taneal; Kennedy, Belinda; Kourouche, Sarah; Goldsmith, Helen

    2016-01-01

    The majority of trauma nursing education is focused on the emergency phases of care. We describe the development and evaluation of a trauma eLearning module for the ward environment. The module was developed using adult learning principles and implemented in 2 surgical wards. There were 3 phases of evaluation: (1) self-efficacy of nurses; (2) relevance and usability of the module and; (3) application of knowledge learnt. The majority indicated they had applied new knowledge, particularly when performing a physical assessment (85.7%), communicating (91.4%), and identifying risk of serious illness (90.4%). Self-efficacy relating to confidence in caring for patients, communication, and escalating clinical deterioration improved (p = .023). An eLearning trauma patient assessment module for ward nursing staff improves nursing knowledge and self-efficacy. PMID:26745537

  5. V-band integrated quadriphase modulator

    NASA Technical Reports Server (NTRS)

    Grote, A.; Chang, K.

    1983-01-01

    A V-band integrated circuit quadriphase shift keyed modulator/exciter for space communications systems was developed. Intersatellite communications systems require direct modulation at 60 GHz to enhance signal processing capability. For most systems, particularly space applications, small and lightweight components are essential to alleviate severe system design constraints. Thus to achieve wideband, high data rate systems, direct modulation techniques at millimeter waves using solid state integrated circuit technology are an integral part of the overall technology developments.

  6. Trauma and the wise baby.

    PubMed

    Kilborne, Benjamin

    2011-09-01

    This paper expands upon Ferenczi's concept of the wise baby and explores the dynamics of ignorance and compensatory ideals of wisdom as reactions to trauma and as manifestations of "double conscience," shame dynamics and Oedipal shame. Focusing on feelings of ignorance, of knowing and not knowing and their relation to trauma, the author elaborates on the dynamics of fantasies of wisdom, adumbrating implications for psychoanalytic technique. PMID:21818096

  7. Vascular trauma in civilian practice.

    PubMed Central

    Golledge, J.; Scriven, M. W.; Fligelstone, L. J.; Lane, I. F.

    1995-01-01

    Vascular trauma is associated with major morbidity and mortality, but little is known about its incidence or nature in Britain. A retrospective study of 36 patients requiring operative intervention for vascular trauma under one vascular surgeon over a 6-year period was undertaken. Twenty-four patients suffered iatrogenic trauma (median age 61 years); including cardiological intervention (19), radiological intervention (2), varicose vein surgery (1), umbilical vein catherisation (1) and isolated hyperthermic limb perfusion (1). There were 23 arterial and three venous injuries. Twelve patients had accidental trauma (median age 23 years). Three of the ten patients with blunt trauma were referred for vascular assessment before orthopaedic intervention, two after an on-table angiogram and five only after an initial orthopaedic procedure (range of delay 6 h to 10 days). Injuries were arterial in nine, venous in two and combined in one. Angiography was obtained in six patients, and in two patients with multiple upper limb fractures identified the site of injury when clinical localisation was difficult. A variety of vascular techniques were used to treat the injuries. Two patients died postoperatively and one underwent major limb amputation. Thirty-two (89%) remain free of vascular sequelae after a median follow-up of 48 months (range 3-72 months). Vascular trauma is uncommon in the United Kingdom. To repair the injuries a limited repertoire of vascular surgery techniques is needed. Therefore, vascular surgical assessment should be sought at an early stage to prevent major limb loss. PMID:8540659

  8. An exploratory association study of the influence of noradrenergic genes and childhood trauma in Borderline Personality Disorder.

    PubMed

    Martín-Blanco, Ana; Ferrer, Marc; Soler, Joaquim; Arranz, Maria Jesús; Vega, Daniel; Bauzà, Joana; Calvo, Natalia; Elices, Matilde; Sanchez-Mora, Cristina; García-Martinez, Iris; Salazar, Juliana; Ribases, Marta; Carmona, Cristina; Prat, Mónica; Pascual, Juan C

    2015-09-30

    This study investigated the possible association of 40 polymorphisms within 4 noradrenergic genes with BPD risk and the modulating effect of childhood trauma on these associations in 481 BPD subjects and 442 controls. COMT rs5993882, DBH rs77905 and SLC6A2 rs1814270 showed associations with BPD, which were modulated by childhood trauma. However, none of these findings survived Bonferroni correction. Further investigation is needed to clarify the involvement of these genes in BPD pathogenesis. PMID:26216165

  9. Complications of pediatric trauma.

    PubMed

    Czerwinski, S J

    1991-09-01

    MSOF is a life-threatening complication of trauma. The body is a dynamic interrelated group of systems that work together efficiently. Changes in one system generally have a widespread impact, and soon the entire system is changed. In children with MSOF, the normal equilibrium that is maintained between organ systems does not exist. Generalized disruption of organ functions occur, and the body attempts to compensate and regain its homeostasis. This activity will often benefit certain organs and harm others. If the disruption continues and compensation fails, organ dysfunction occurs and general chaos reigns. Medical and nursing interventions are directed toward supporting individual organ systems before failure occurs. Attempts to provide this support for one system can cause adverse effects to occur in other systems. Although this is a potential result of medical and nursing interventions, often there is no other choice. It is essential that nurses be aware of the systemic consequences of these interventions and carefully evaluate them. Although overall mortality rates are high, children have a better chance for survival than adults. Expert nursing assessments, interventions, and evaluations are essential to maximize this outcome. More research in the area of MSOF in children is necessary, with specific attention to nursing management and the effect on patient outcome. PMID:1883588

  10. [Major respiratory tract traumas].

    PubMed

    Petrov, D; Obretenov, E; Kalaĭdzhiev, G; Plochev, M; Kostadinov, D

    2002-01-01

    Between 1988 and 2000 a total of 33 patients with traumatic tracheobronchial lesions were diagnosed and treated. The trauma was penetrating in 7 (stab and gun-shot), blunt in 10 (car accidents, compression and falling from heights) and iatrogenic in 16 of them (postintubational--15, after foreign body extraction--1). The main clinical and radiological features were subcutaneous emphysema, hemoptysis, respiratory insufficiency, pneumomediastinum and pneumothorax. The diagnosis was confirmed in all patients by early fiberoptic bronchoscopy. "Watch and see" tactics with massive antibiotics therapy was followed in 4 (12%) patients. A surgical treatment was carried out in 29 (88%) patients as follows: simple repair--19 (58%), left pneumonectomy--2 (6%), tracheal resection and anastomosis "end to end"--2 (6%), tracheostomy--1 (3%), thoracocenthesis and drainage--3 (9%) and cervical mediastinotomy--2 (6%). The operative mortality was 9%. The cause of death in these 3 patients were associated brain and spinal cord injuries. In the rest of patients the early and long-term postoperative results were considered very good. PMID:12515032

  11. Abdominal trauma by ostrich

    PubMed Central

    Usurelu, Sergiu; Bettencourt, Vanessa; Melo, Gina

    2015-01-01

    Introduction Ostriches typically avoid humans in the wild, since they correctly assess humans as potential predators, and, if approached, often run away. However, ostriches may turn aggressive rather than run when threatened, especially when cornered, and may also attack when they feel the need to defend their offspring or territories. Presentation of case A 71-year-old male patient presented with intra abdominal injury sustained from being kicked in the abdominal wall by an ostrich. During laparotomy, were found free peritoneal effusion and perforation of the small intestine. Discussion The clinical history and physical examination are extremely important for diagnostic and therapeutic decision making. CT-scan is the most accurate exam for making diagnosis. Surgery is the treatment of choice, and is always indicated when there is injury to the hollow viscera. In general it is possible to suture the defect. Conclusion In cases of blunt abdominal trauma by animals is necessary to have a low threshold of suspicion for acute abdomen. PMID:25685344

  12. Trauma of the midface

    PubMed Central

    Kühnel, Thomas S.; Reichert, Torsten E.

    2015-01-01

    Fractures of the midface pose a serious medical problem as for their complexity, frequency and their socio-economic impact. Interdisciplinary approaches and up-to-date diagnostic and surgical techniques provide favorable results in the majority of cases though. Traffic accidents are the leading cause and male adults in their thirties are affected most often. Treatment algorithms for nasal bone fractures, maxillary and zygomatic fractures are widely agreed upon whereas trauma to the frontal sinus and the orbital apex are matter of current debate. Advances in endoscopic surgery and limitations of evidence based gain of knowledge are matters that are focused on in the corresponding chapter. As for the fractures of the frontal sinus a strong tendency towards minimized approaches can be seen. Obliteration and cranialization seem to decrease in numbers. Some critical remarks in terms of high dose methylprednisolone therapy for traumatic optic nerve injury seem to be appropriate. Intraoperative cone beam radiographs and preshaped titanium mesh implants for orbital reconstruction are new techniques and essential aspects in midface traumatology. Fractures of the anterior skull base with cerebrospinal fluid leaks show very promising results in endonasal endoscopic repair. PMID:26770280

  13. [Trauma of the midface].

    PubMed

    Kühnel, T S; Reichert, T E

    2015-03-01

    Fractures of the midface pose a serious medical problem as for their complexity, frequency and their socio-economic impact. Interdisciplinary approaches and up-to-date diagnostic and surgical techniques provide favorable results in the majority of cases though. Traffic accidents are the leading cause and male adults in their thirties are affected most often. Treatment algorithms for nasal bone fractures, maxillary and zygoma fractures are widely agreed upon whereas trauma to the frontal sinus and the orbital apex are matter of current debate. Advances in endoscopic surgery and limitations of evidence based gain of knowledge are matters that are focused on in the corresponding chapter. As for the fractures of the frontal sinus a strong tendency towards minimized approaches can be seen. Obliteration and cranialisation seem to decrease in numbers.Some critical remarks in terms of high dose methylprednisolone therapy for traumatic optic nerve injury seem to be appropriate.Intraoperative cone beam radiographs and preshaped titanium mesh implants for orbital reconstruction are new techniques and essential aspects in midface traumatology. Fractures of the anterior skull base with cerebrospinal fluid leaks show very promising results in endonasal endoscopic repair. PMID:25860490

  14. Lightweight ceramic filter components: Evaluation and application

    SciTech Connect

    Eggerstedt, P.M.

    1995-11-01

    Ceramic candle filtration is an attractive technology for particulate removal at high temperatures. The primary objective of this SBIR research program is to increase the performance, durability, and corrosion resistance of lightweight filter candles and filter tubesheet components (Fibrosic{trademark}), fabricated from vacuum formed chopped ceramic fiber (VFCCF), for use in advanced coal utilization applications. Phase 1 results proved that significant gains in material strength and particle retentivity are possible by treatment of VFCCF materials with colloidal ceramic oxides. Phase 2 effort will show how these treated materials tolerate high temperature and vapor-phase alkali species, on a long-term basis. With good durability and corrosion resistance, high temperature capability, and a low installed and replacement cost, these novel materials will help promote commercial acceptance of ceramic candle filter technology, as well as increase the efficiency and reliability of coal utilization processes in general.

  15. Advances in lightweight nickel electrode technology

    NASA Technical Reports Server (NTRS)

    Coates, Dwaine; Paul, Gary; Daugherty, Paul

    1989-01-01

    Studies are currently underway to further the development of lightweight nickel electrode technology. Work is focused primarily on the space nickel-hydrogen system and nickel-iron system but is also applicable to the nickel-cadmium and nickel-zinc systems. The goal is to reduce electrode weight while maintaining or improving performance, thereby increasing electrode energy density. Two basic electrode structures are being investigated. The first is the traditional nickel sponge produced from sintered nickel-carbonyl powder. The second is a new material for this application which consists of a non-woven mat of nickel fiber. Electrodes are being manufactured, tested, and evaluated at the electrode and cell level.

  16. Advances in lightweight nickel electrode technology

    NASA Technical Reports Server (NTRS)

    Coates, Dwaine; Paul, Gary; Wheeler, James R.; Daugherty, Paul

    1989-01-01

    Studies are currently underway to further the development of lightweight nickel electrode technology. Work is focused primarily on the space nickel-hydrogen system and nickel-iron system but is also applicable to the nickel-cadmium and nickel-zinc systems. The goal is to reduce electrode weight while maintaining or improving performance thereby increasing electrode energy density. Two basic electrode structures are being investigated. The first is the traditional nickel sponge produced from sintered nickel-carbonyl powder and the second is a new material for this application which consists of a non-woven mat of nickel fiber. Electrodes are being manufactured, tested and evaluated at the electrode and cell level.

  17. Lightweight, durable lead-acid batteries

    DOEpatents

    Lara-Curzio, Edgar; An, Ke; Kiggans, Jr., James O; Dudney, Nancy J; Contescu, Cristian I; Baker, Frederick S; Armstrong, Beth L

    2013-05-21

    A lightweight, durable lead-acid battery is disclosed. Alternative electrode materials and configurations are used to reduce weight, to increase material utilization and to extend service life. The electrode can include a current collector having a buffer layer in contact with the current collector and an electrochemically active material in contact with the buffer layer. In one form, the buffer layer includes a carbide, and the current collector includes carbon fibers having the buffer layer. The buffer layer can include a carbide and/or a noble metal selected from of gold, silver, tantalum, platinum, palladium and rhodium. When the electrode is to be used in a lead-acid battery, the electrochemically active material is selected from metallic lead (for a negative electrode) or lead peroxide (for a positive electrode).

  18. Lightweight, durable lead-acid batteries

    DOEpatents

    Lara-Curzio, Edgar; An, Ke; Kiggans, Jr., James O.; Dudney, Nancy J.; Contescu, Cristian I.; Baker, Frederick S.; Armstrong, Beth L.

    2011-09-13

    A lightweight, durable lead-acid battery is disclosed. Alternative electrode materials and configurations are used to reduce weight, to increase material utilization and to extend service life. The electrode can include a current collector having a buffer layer in contact with the current collector and an electrochemically active material in contact with the buffer layer. In one form, the buffer layer includes a carbide, and the current collector includes carbon fibers having the buffer layer. The buffer layer can include a carbide and/or a noble metal selected from of gold, silver, tantalum, platinum, palladium and rhodium. When the electrode is to be used in a lead-acid battery, the electrochemically active material is selected from metallic lead (for a negative electrode) or lead peroxide (for a positive electrode).

  19. KITTEN Lightweight Kernel 0.1 Beta

    Energy Science and Technology Software Center (ESTSC)

    2007-12-12

    The Kitten Lightweight Kernel is a simplified OS (operating system) kernel that is intended to manage a compute node's hardware resources. It provides a set of mechanisms to user-level applications for utilizing hardware resources (e.g., allocating memory, creating processes, accessing the network). Kitten is much simpler than general-purpose OS kernels, such as Linux or Windows, but includes all of the esssential functionality needed to support HPC (high-performance computing) MPI, PGAS and OpenMP applications. Kitten providesmore » unique capabilities such as physically contiguous application memory, transparent large page support, and noise-free tick-less operation, which enable HPC applications to obtain greater efficiency and scalability than with general purpose OS kernels.« less

  20. Lightweight, low-cost solar energy collector

    NASA Technical Reports Server (NTRS)

    Hochberg, Eric B. (Inventor); Costen, Michael K. (Inventor)

    2006-01-01

    A lightweight solar concentrator of the reflecting parabolic or trough type is realized via a thin reflecting film, an inflatable structural housing and tensioned fibers. The reflector element itself is a thin, flexible, specularly-reflecting sheet or film. The film is maintained in the parabolic trough shape by means of a plurality of identical tensioned fibers arranged to be parallel to the longitudinal axis of the parabola. Fiber ends are terminated in two identical spaced anchorplates, each containing a plurality of holes which lie on the desired parabolic contour. In a preferred embodiment, these fibers are arrayed in pairs with one fiber contacting the front side of the reflecting film and the other contacting the back side of the reflecting film. The reflective surface is thereby slidably captured between arrays of fibers which control the shape and position of the reflective film. Gas pressure in the inflatable housing generates fiber tension to achieve a truer parabolic shape.

  1. Lightweight Thermal Protection System for Atmospheric Entry

    NASA Technical Reports Server (NTRS)

    Stewart, David; Leiser, Daniel

    2007-01-01

    TUFROC (Toughened Uni-piece Fibrous Reinforced Oxidation-resistant Composite) has been developed as a new thermal protection system (TPS) material for wing leading edge and nose cap applications. The composite withstands temperatures up to 1,970 K, and consists of a toughened, high-temperature surface cap and a low-thermal-conductivity base, and is applicable to both sharp and blunt leading edge vehicles. This extends the possible application of fibrous insulation to the wing leading edge and/or nose cap on a hypersonic vehicle. The lightweight system comprises a treated carbonaceous cap composed of ROCCI (Refractory Oxidation-resistant Ceramic Carbon Insulation), which provides dimensional stability to the outer mold line, while the fibrous base material provides maximum thermal insulation for the vehicle structure.

  2. A lightweight communication library for distributed computing

    NASA Astrophysics Data System (ADS)

    Groen, Derek; Rieder, Steven; Grosso, Paola; de Laat, Cees; Portegies Zwart, Simon

    2010-01-01

    We present MPWide, a platform-independent communication library for performing message passing between computers. Our library allows coupling of several local message passing interface (MPI) applications through a long-distance network and is specifically optimized for such communications. The implementation is deliberately kept lightweight and platform independent, and the library can be installed and used without administrative privileges. The only requirements are a C++ compiler and at least one open port to a wide-area network on each site. In this paper we present the library, describe the user interface, present performance tests and apply MPWide in a large-scale cosmological N-body simulation on a network of two computers, one in Amsterdam and the other in Tokyo.

  3. Performance of a New Lightweight Reciprocating Pump

    SciTech Connect

    Whitehead, J C

    2005-06-09

    A new four-chamber piston pump design has been fabricated and tested. The small-scale propellant pump is intended to be powered by gas at elevated temperatures, e.g. in a gas-generator cycle rocket propulsion system. Two key features are combined for the first time: leak-tight liquid-cooled seals, and a high throughput per unit hardware mass. Measured performance curves quantify flows, pressures, leakage, volumetric efficiency, and tank pressure requirements. A pair of 300-gram pumps operating with significant margin could deliver fuel and oxidizer at 5 MPa to a compact lightweight 1000-N engine, while tank pressure remains at 0.35 MPa. Pump weight is well below one percent of thrust, as is typical for launch vehicle engines. Applications include small upper stages, aggressive maneuvers in space, and miniature launch vehicles for Mars ascent.

  4. Cryostable lightweight frit-bonded silicon mirror

    NASA Astrophysics Data System (ADS)

    Anthony, Frank M.; McCarter, Douglas R.; Tangedahl, Matt; Content, David A.

    2002-11-01

    The excellent polishability, low density and relatively high stiffness of silicon make it an attractive candidate for optical applications that require superior performance. Assembly of silicon details by means of glass frit bonding permits significant weight reduction thus enhancing the benefit of silicon mirrors. To demonstrate the performance potential, a small lightweight glass frit bonded silicon mirror was fabricated and tested for cryostability. The test mirror was 12.5cm in diameter with a 60cm spherical radius and a maximum thickness, at the perimeter, of 2.5cm. A machined silicon core was used to stiffen the two face sheets of the silicon sandwich. These three elements were assembled, by glass frit bonding, to form the substrate that was polished. The experimental evaluation, in a liquid nitrogen cryostat, demonstrated cryostability performance significantly better than required by the mirror specification.

  5. Active vibration control of lightweight floor systems

    NASA Astrophysics Data System (ADS)

    Baader, J.; Fontana, M.

    2016-04-01

    Wide-span and lightweight floors are often prone to structural vibrations due to their low resonance frequency and poor material damping. Their dynamic behaviour can be improved using passive, semi-active or active vibration control devices. The following article proposes a novel method for the controller synthesis for active vibration control. An existing passive TMD (tuned mass damper) is modelled and equipped with an actuator in order to provide more efficient damping. Using an iterative optimization approach under constraints, an optimal controller is found which minimizes a quadratic cost function in frequency domain. A simulation of an existing test bench shows that the active vibration control device is able to provide increased damping compared to the passive TMD.

  6. Lightweight, Compact, Long Range Camera Design

    NASA Astrophysics Data System (ADS)

    Shafer, Donald V.

    1983-08-01

    The model 700 camera is the latest in a 30-year series of LOROP cameras developed by McDonnell Douglas Astronautics Company (MDAC) and their predecessor companies. The design achieves minimum size and weight and is optimized for low-contrast performance. The optical system includes a 66-inch focal length, f/5.6, apochromatic lens and three folding mirrors imaging on a 4.5-inch square format. A three-axis active stabilization system provides the capability for long exposure time and, hence, fine grain films can be used. The optical path forms a figure "4" behind the lens. In front of the lens is a 45° pointing mirror. This folded configuration contributed greatly to the lightweight and compact design. This sequential autocycle frame camera has three modes of operation with one, two, and three step positions to provide a choice of swath widths within the range of lateral coverage. The magazine/shutter assembly rotates in relationship with the pointing mirror and aircraft drift angle to maintain film format alignment with the flight path. The entire camera is angular rate stabilized in roll, pitch, and yaw. It also employs a lightweight, electro-magnetically damped, low-natural-frequency spring suspension for passive isolation from aircraft vibration inputs. The combined film transport and forward motion compensation (FMC) mechanism, which is operated by a single motor, is contained in a magazine that can, depending on accessibility which is installation dependent, be changed in flight. The design also stresses thermal control, focus control, structural stiffness, and maintainability. The camera is operated from a remote control panel. This paper describes the leading particulars and features of the camera as related to weight and configuration.

  7. Lightweight deformable mirrors for future space telescopes

    NASA Astrophysics Data System (ADS)

    Patterson, Keith

    This thesis presents a concept for ultra-lightweight deformable mirrors based on a thin substrate of optical surface quality coated with continuous active piezopolymer layers that provide modes of actuation and shape correction. This concept eliminates any kind of stiff backing structure for the mirror surface and exploits micro-fabrication technologies to provide a tight integration of the active materials into the mirror structure, to avoid actuator print-through effects. Proof-of-concept, 10-cm-diameter mirrors with a low areal density of about 0.5 kg/m2 have been designed, built and tested to measure their shape-correction performance and verify the models used for design. The low cost manufacturing scheme uses replication techniques, and strives for minimizing residual stresses that deviate the optical figure from the master mandrel. It does not require precision tolerancing, is lightweight, and is therefore potentially scalable to larger diameters for use in large, modular space telescopes. Other potential applications for such a laminate could include ground-based mirrors for solar energy collection, adaptive optics for atmospheric turbulence, laser communications, and other shape control applications. The immediate application for these mirrors is for the Autonomous Assembly and Reconfiguration of a Space Telescope (AAReST) mission, which is a university mission under development by Caltech, the University of Surrey, and JPL. The design concept, fabrication methodology, material behaviors and measurements, mirror modeling, mounting and control electronics design, shape control experiments, predictive performance analysis, and remaining challenges are presented herein. The experiments have validated numerical models of the mirror, and the mirror models have been used within a model of the telescope in order to predict the optical performance. A demonstration of this mirror concept, along with other new telescope technologies, is planned to take place during

  8. Mobility of lightweight robots over snow

    NASA Astrophysics Data System (ADS)

    Lever, James H.; Shoop, Sally A.

    2006-05-01

    Snowfields are challenging terrain for lightweight (<50 kg) unmanned ground vehicles. Deep sinkage, high snowcompaction resistance, traction loss while turning and ingestion of snow into the drive train can cause immobility within a few meters of travel. However, for suitably designed vehicles, deep snow offers a smooth, uniform surface that can obliterate obstacles. Key requirements for good over-snow mobility are low ground pressure, large clearance relative to vehicle size and a drive system that tolerates cohesive snow. A small robot will invariably encounter deep snow relative to its ground clearance. Because a single snowstorm can easily deposit 30 cm of fresh snow, robots with ground clearance less than about 10 cm must travel over the snow rather than gain support from the underlying ground. This can be accomplished using low-pressure tracks (< 1.5 kPa). Even still, snow-compaction resistance can exceed 20% of vehicle weight. Also, despite relatively high traction coefficients for low track pressures, differential or skid steering is difficult because the outboard track can easily break traction as the vehicle attempts to turn against the snow. Short track lengths (relative to track separation) or coupled articulated robots offer steering solutions for deep snow. This paper presents preliminary guidance to design lightweight robots for good mobility over snow based on mobility theory and tests of PackBot, Talon and SnoBot, a custom-designed research robot. Because many other considerations constrain robot designs, this guidance can help with development of winterization kits to improve the over-snow performance of existing robots.

  9. Vehicular hydrogen storage using lightweight tanks

    SciTech Connect

    Mitlitsky, F; Weisberg, A H; Myers, B

    2000-07-22

    Lightweight hydrogen storage for vehicles is enabled by adopting and adapting aerospace tankage technology. The weight, volume, and cost are already acceptable and improving. Prototype tankage was demonstrated with 11.3% hydrogen by weight, 1.74 million inch (44.3 km) burst performance factor (P{sub b}V/W), and 3.77 kWh/kg specific energy for the tank and hydrogen (LHV). DOE cannot afford full scale aerospace development costs. For example, it costs many tens of $M to develop a rocket motor casing with a safety factor (SF) of 1.25. Large teams of experts are required to design, develop, and test new processes. Car companies are buying existing technology with only modest investments in research and development (R&D). The Lawrence Livermore National Laboratory (LLNL) team is maximizing the leverage from DOE funding by joining with industry to solve technical risks at the component level. LLNL is developing fabrication processes with IMPCO Technologies, Thiokol Propulsion, and Aero Tec Laboratories (ATL). LLNL is creating commercial products that are close to adoption under DOE solicitation. LLNL is breaking ground to achieve greater than 10% hydrogen by weight tankage with safety that exceeds the requirements of NGV2 standards modified for hydrogen. Risk reduction is proceeding along three axes: (1) Commercializable products will be available next year with {approx}90% confidence; (2) R&D progress is pushing the envelope in lightweight tankage for vehicles; and (3) Integration challenges are being met with partners in industry and DOE demo programs. This project is a key part of LLNL's effort to develop high cycle life energy storage systems with >600 Wh/kg specific energy for various applications, including: high altitude long endurance solar rechargeable aircraft, zero emission vehicles, hybrid energy storage/propulsion systems for spacecraft, energy storage for premium power, remote power sources, and peak shaving.

  10. Carbody structural lightweighting based on implicit parameterized model

    NASA Astrophysics Data System (ADS)

    Chen, Xin; Ma, Fangwu; Wang, Dengfeng; Xie, Chen

    2014-05-01

    Most of recent research on carbody lightweighting has focused on substitute material and new processing technologies rather than structures. However, new materials and processing techniques inevitably lead to higher costs. Also, material substitution and processing lightweighting have to be realized through body structural profiles and locations. In the huge conventional workload of lightweight optimization, model modifications involve heavy manual work, and it always leads to a large number of iteration calculations. As a new technique in carbody lightweighting, the implicit parameterization is used to optimize the carbody structure to improve the materials utilization rate in this paper. The implicit parameterized structural modeling enables the use of automatic modification and rapid multidisciplinary design optimization (MDO) in carbody structure, which is impossible in the traditional structure finite element method (FEM) without parameterization. The structural SFE parameterized model is built in accordance with the car structural FE model in concept development stage, and it is validated by some structural performance data. The validated SFE structural parameterized model can be used to generate rapidly and automatically FE model and evaluate different design variables group in the integrated MDO loop. The lightweighting result of body-in-white (BIW) after the optimization rounds reveals that the implicit parameterized model makes automatic MDO feasible and can significantly improve the computational efficiency of carbody structural lightweighting. This paper proposes the integrated method of implicit parameterized model and MDO, which has the obvious practical advantage and industrial significance in the carbody structural lightweighting design.

  11. Trauma-Informed Care in the Massachusetts Child Trauma Project.

    PubMed

    Bartlett, Jessica Dym; Barto, Beth; Griffin, Jessica L; Fraser, Jenifer Goldman; Hodgdon, Hilary; Bodian, Ruth

    2016-05-01

    Child maltreatment is a serious public health concern, and its detrimental effects can be compounded by traumatic experiences associated with the child welfare (CW) system. Trauma-informed care (TIC) is a promising strategy for addressing traumatized children's needs, but research on the impact of TIC in CW is limited. This study examines initial findings of the Massachusetts Child Trauma Project, a statewide TIC initiative in the CW system and mental health network. After 1 year of implementation, Trauma-Informed Leadership Teams in CW offices emerged as key structures for TIC systems integration, and mental health providers' participation in evidence-based treatment (EBT) learning collaboratives was linked to improvements in trauma-informed individual and agency practices. After approximately 6 months of EBT treatment, children had fewer posttraumatic symptoms and behavior problems compared to baseline. Barriers to TIC that emerged included scarce resources for trauma-related work in the CW agency and few mental providers providing EBTs to young children. Future research might explore variations in TIC across service system components as well as the potential for differential effects across EBT models disseminated through TIC. PMID:26564909

  12. Liver trauma grading and biochemistry tests.

    PubMed

    Arslan, Gozde; Gemici, Aysegul Akdogan; Yirgin, Inci Kizildag; Gulsen, Esma; Inci, Ercan

    2013-10-01

    Among solid organ blunt traumas, the liver and spleen are mostly subject to injury. In addition, the liver is also commonly injured in penetrating traumas because of its size, location, and the ease of injury to the "Glisson Capsule". Several enzymes are known to be elevated following trauma. In our study, we evaluated the correlation between the levels of serum aspartate aminotransferase, alanine aminotransferase, lactate dehydrogenase, and gamma-glutamyl transpeptidase in 57 patients with blunt trauma to the liver and compared these values to the American Association for the Surgery of Trauma trauma grading system. Additionally, we compared the enzyme level elevations in these patients to the enzyme levels of 29 healthy subjects. As expected, we found significant elevations in enzyme levels of trauma patients compared to the control group. The calculated point estimates were not significantly different between grades 1 and 2 trauma. However, grade 3 trauma group showed a significant increase in enzyme levels. PMID:23793528

  13. Integrated Control with Structural Feedback to Enable Lightweight Aircraft

    NASA Technical Reports Server (NTRS)

    Taylor, Brian R.

    2011-01-01

    This presentation for the Fundamental Aeronautics Program Technical Conference covers the benefits of active structural control, related research areas, and focuses on the use of optimal control allocation for the prevention of critical loads. Active control of lightweight structures has the potential to reduce aircraft weight and fuel burn. Sensor, control law, materials, control effector, and system level research will be necessary to enable active control of lightweight structures. Optimal control allocation with structural feedback has been shown in simulation to be feasible in preventing critical loads and is one example of a control law to enable future lightweight aircraft.

  14. Structural analysis of a new type lightweight optical mirror blank

    NASA Astrophysics Data System (ADS)

    Li, Yeping; Cui, Xiangqun; Hu, Ningsheng

    2010-07-01

    To reduce the cost and increase the feasibility of the astronomical optical telescope, modern large optical telescope is normally required to be as light as possible. Therefore lightweight mirror is always pursued by large telescopes development. In this paper, a new type lightweight optical mirror blank, the evaluation of its technical feasibility and the reduction of cost are introduced. For the purpose of applying active optics with this lightweight mirror blank, the structural analysis, thermal analysis and optical performance simulation by the finite element method have been presented.

  15. Lightweight Phase-Change Material For Solar Power

    NASA Technical Reports Server (NTRS)

    Stark, Philip

    1993-01-01

    Lightweight panels containing phase-change materials developed for use as heat-storage elements of compact, lightweight, advanced solar dynamic power system. During high insolation, heat stored in panels via latent heat of fusion of phase-change material; during low insolation, heat withdrawn from panels. Storage elements consist mainly of porous carbon-fiber structures imbued with germanium. Developed for use aboard space station in orbit around Earth, also adapted to lightweight, compact, portable solar-power systems for use on Earth.

  16. Delta Alerts: Changing Outcomes in Geriatric Trauma.

    PubMed

    Wiles, Lynn L; Day, Mark D; Harris, LeAnna

    2016-01-01

    Geriatric trauma patients (GTPs) suffering minor injuries have suboptimal outcomes compared with younger populations. Patients 65 years or older account for 10% of all traumas but 28% of all trauma deaths. This trauma center established a third tier trauma alert specifically targeting GTPs at risk for poor outcomes. A Delta Alert is activated when GTPs suffer injuries that fall outside traditional trauma alert guidelines. Early identification and treatment of injuries and expedited referral to specialty groups have improved our GTPs' outcomes including decreased mortality and length of stay and increased percentage of GTPs who are discharged home. PMID:27414140

  17. Video recording of emergency department trauma resuscitations.

    PubMed

    Brown, Debra M

    2003-01-01

    Although hospitals are faced with the challenges of appropriately informing the public regarding health care and protecting the privacy of patients, a comprehensive policy concerning videotaping of trauma resuscitations can be developed to comply with regulatory bodies. Video recording of trauma team resuscitations can be utilized as an effective quality improvement tool to evaluate trauma team performance, psychomotor skills and techniques, and to identify educational needs related to specific trauma populations. Video recording of Trauma resuscitations is an effective tool for improving trauma team performance by educating clinical staff regarding roles and responsibilities. PMID:16265920

  18. The study of psychic trauma.

    PubMed

    Bacciagaluppi, Marco

    2011-01-01

    This article starts from the DSM definition of psychic trauma. A central source in this field is the 1992 book by Judith Herman. One line of investigation is the sexual abuse of women and children. In an early phase, both Janet and Freud described dissociation as a reaction to trauma. In 1897, Freud disputed the reality of sexual trauma, a position countered later by Ferenczi. In a later phase, this subject was investigated by the American feminist movement. Studies of physical abuse are then described, followed by mental abuse and neglect. Another line of investigation is combat neurosis. The two lines converged in the definition of PTSD and its incorporation into the DSM in 1980. The views on trauma of John Bowlby and Alice Miller are also discussed. The integration of the relational model in psychoanalysis with the trauma literature is presented. The most recent advances are located in neurobiology. The discussion makes a preliminary investigation of the remote causes of war and sexual violence. PMID:21902510

  19. Lightweight, Self-Deploying Foam Antenna Structures

    NASA Technical Reports Server (NTRS)

    Sokolowski, Witold; Levin, Steven; Rand, Peter

    2004-01-01

    Lightweight, deployable antennas for a variety of outer-space and terrestrial applications would be designed and fabricated according to the concept of cold hibernated elastic memory (CHEM) structures, according to a proposal. Mechanically deployable antennas now in use are heavy, complex, and unreliable, and they utilize packaging volume inefficiently. The proposed CHEM antenna structures would be simple and would deploy themselves without need for any mechanisms and, therefore, would be more reliable. The proposed CHEM antenna structures would also weigh less, could be packaged in smaller volumes, and would cost less, relative to mechanically deployable antennas. The CHEM concept was described in two prior NASA Tech Briefs articles: "Cold Hibernated Elastic Memory (CHEM) Expandable Structures" (NPO-20394), Vol. 23, No. 2 (February 1999), page 56; and "Solar Heating for Deployment of Foam Structures" (NPO-20961), Vol. 25, No. 10 (October 2001), page 36. To recapitulate from the cited prior articles: The CHEM concept is one of utilizing opencell foams of shape-memory polymers (SMPs) to make lightweight, reliable, simple, and inexpensive structures that can be alternately (1) compressed and stowed compactly or (2) expanded, then rigidified for use. A CHEM structure is fabricated at full size from a block of SMP foam in its glassy state [at a temperature below the glass-transition temperature (Tg) of the SMP]. The structure is heated to the rubbery state of the SMP (that is, to a temperature above Tg) and compacted to a small volume. After compaction, the structure is cooled to the glassy state of the SMP. The compacting force can then be released and the structure remains compact as long as the temperature is kept below Tg. Upon subsequent heating of the structure above Tg, the simultaneous elastic recovery of the foam and its shape-memory effect cause the structure to expand to its original size and shape. Once thus deployed, the structure can be rigidified by

  20. Assessment of lightweight mobile nuclear power systems. [for airborne vehicles

    NASA Technical Reports Server (NTRS)

    Anderson, J. L.; Rom, F. E.

    1973-01-01

    A review was made of lightweight mobile nuclear power systems (LMNPS). Data cover technical feasibility studies of LMNPS and airborne vehicles, mission studies, and non-technical conditions that are required to develop and use LMNPS.

  1. Ventilatory strategies in trauma patients.

    PubMed

    Arora, Shubhangi; Singh, Preet Mohinder; Trikha, Anjan

    2014-01-01

    Lung injury in trauma patients can occur because of direct injury to lung or due to secondary effects of injury elsewhere for example fat embolism from a long bone fracture, or due to response to a systemic insult such as; acute respiratory distress syndrome (ARDS) secondary to sepsis or transfusion related lung injury. There are certain special situations like head injury where the primary culprit is not the lung, but the brain and the ventilator strategy is aimed at preserving the brain tissue and the respiratory system takes a second place. The present article aims to delineate the strategies addressing practical problems and challenges faced by intensivists dealing with trauma patients with or without healthy lungs. The lung protective strategies along with newer trends in ventilation are discussed. Ventilatory management for specific organ system trauma are highlighted and their physiological base is presented. PMID:24550626

  2. Management of Carotid Artery Trauma

    PubMed Central

    Lee, Thomas S.; Ducic, Yadranko; Gordin, Eli; Stroman, David

    2014-01-01

    With increased awareness and liberal screening of trauma patients with identified risk factors, recent case series demonstrate improved early diagnosis of carotid artery trauma before they become problematio. There remains a need for unified screening criteria for both intracranial and extracranial carotid trauma. In the absence of contraindications, antithrombotic agents should be considered in blunt carotid artery injuries, as there is a significant risk of progression of vessel injury with observation alone. Despite CTA being used as a common screening modality, it appears to lack sufficient sensitivity. DSA remains to be the gold standard in screening. Endovascular techniques are becoming more widely accepted as the primary surgical modality in the treatment of blunt extracranial carotid injuries and penetrating/blunt intracranial carotid lessions. Nonetheless, open surgical approaches are still needed for the treatment of penetrating extracranial carotid injuries and in patients with unfavorable lesions for endovascular intervention. PMID:25136406

  3. Trauma--the malignant epidemic.

    PubMed

    Muckart, D J

    1991-01-19

    Trauma is the commonest cause of death in children and young adults in the USA and the UK and the incidence of both accidental and non-accidental injury continues to increase. In the Western world more pre-retirement years of life are lost annually from trauma than malignant disease, heart disease, and AIDS combined, and by the beginning of the last decade injury deaths outnumbered deaths from all other causes combined in those under 35 years of age. In South Africa, although infectious diseases continue to exact their toll, a similar pattern is emerging. Alcohol and speed are responsible for the majority of motor vehicle accidents, while the increasing ownership of firearms directly parallels the homicide rates from these weapons. Stricter application of the legislation governing alcohol, driving and firearm control is required and a regionalised trauma care programme is desperately needed to contain this epidemic. PMID:1989097

  4. Transfusion medicine in trauma patients

    PubMed Central

    Murthi, Sarah B; Dutton, Richard P; Edelman, Bennett B; Scalea, Thomas M; Hess, John R

    2011-01-01

    Injured patients stress the transfusion service with frequent demands for uncrossmatched red cells and plasma, occasional requirements for large amounts of blood products and the need for new and better blood products. Transfusion services stress trauma centers with demands for strict accountability for individual blood component units and adherence to indications in a clinical field where research has been difficult, and guidance opinion-based. New data suggest that the most severely injured patients arrive at the trauma center already coagulopathic and that these patients benefit from prompt, specific, corrective treatment. This research is clarifying trauma system requirements for new blood products and blood-product usage patterns, but the inability to obtain informed consent from severely injured patients remains an obstacle to further research. PMID:21083009

  5. ECUT energy data reference series: lightweight materials for ground transportation

    SciTech Connect

    Abarcar, R.B.; Hane, G.J.; Johnson, D.R.

    1984-07-01

    This report summarizes information that describes the use of lightweight materials in automobiles. The information on this mode of transportation represents the largest potential energy savings for substitution of lightweight materials in the transportation sector. Included are data on energy conversion efficiency of the engine and its relationship to vehicle weight, the capital stock, the amount of energy used, and the service activity level as measured in ton-miles.

  6. Fabrication of lightweight Si/SiC LIDAR mirrors

    NASA Technical Reports Server (NTRS)

    Goela, Jitendra S.; Taylor, Raymond L.

    1991-01-01

    A new, chemical vapor deposition (CVD) process was developed for fabricating lightweight, polycrystalline silicon/silicon-carbide (Si/SiC) mirrors. The process involves three CVD steps: (1) to produce the mirror faceplate; (2) to form the lightweight backstructure, which is deposited integral to the faceplate; and (3) to deposit a layer of optical-grade material, e.g., Si, onto the front surface of the faceplate. The mirror figure and finish are fabricated into the faceplate.

  7. UTILIZATION OF LIGHTWEIGHT MATERIALS MADE FROM COAL GASIFICATION SLAGS

    SciTech Connect

    Unknown

    1999-07-01

    The major objectives of the subject project are to demonstrate the technical and economic viability of commercial production of lightweight aggregates (LWA) and ultra-lightweight aggregates (ULWA) from slag and to test the suitability of these aggregates for various applications. The project goals are to be accomplished in two phases: Phase I, comprising the production of LWA and ULWA from slag at the large pilot scale, and Phase II, which involves commercial evaluation of these aggregates in a number of applications.

  8. ECUT energy data reference series: Lightweight materials for ground transportation

    NASA Astrophysics Data System (ADS)

    Abarcar, R. B.; Hane, G. J.; Johnson, D. R.

    1984-07-01

    This report summarizes information that describes the use of lightweight materials in automobiles. The information on this mode of transportation represents the largest potential energy savings for substitution of lightweight materials in the transportation sector. Included are data on energy conversion efficiency of the engine and its relationship to vehicle weight, the capital stock, the amount of energy used, and the service activity level as measured in ton-miles.

  9. Vascular Injury in Orthopedic Trauma.

    PubMed

    Mavrogenis, Andreas F; Panagopoulos, George N; Kokkalis, Zinon T; Koulouvaris, Panayiotis; Megaloikonomos, Panayiotis D; Igoumenou, Vasilios; Mantas, George; Moulakakis, Konstantinos G; Sfyroeras, George S; Lazaris, Andreas; Soucacos, Panayotis N

    2016-07-01

    Vascular injury in orthopedic trauma is challenging. The risk to life and limb can be high, and clinical signs initially can be subtle. Recognition and management should be a critical skill for every orthopedic surgeon. There are 5 types of vascular injury: intimal injury (flaps, disruptions, or subintimal/intramural hematomas), complete wall defects with pseudoaneurysms or hemorrhage, complete transections with hemorrhage or occlusion, arteriovenous fistulas, and spasm. Intimal defects and subintimal hematomas with possible secondary occlusion are most commonly associated with blunt trauma, whereas wall defects, complete transections, and arteriovenous fistulas usually occur with penetrating trauma. Spasm can occur after either blunt or penetrating trauma to an extremity and is more common in young patients. Clinical presentation of vascular injury may not be straightforward. Physical examination can be misleading or initially unimpressive; a normal pulse examination may be present in 5% to 15% of patients with vascular injury. Detection and treatment of vascular injuries should take place within the context of the overall resuscitation of the patient according to the established principles of the Advanced Trauma Life Support (ATLS) protocols. Advances in the field, made mostly during times of war, have made limb salvage the rule rather than the exception. Teamwork, familiarity with the often subtle signs of vascular injuries, a high index of suspicion, effective communication, appropriate use of imaging modalities, sound knowledge of relevant technique, and sequence of surgical repairs are among the essential factors that will lead to a successful outcome. This article provides a comprehensive literature review on a subject that generates significant controversy and confusion among clinicians involved in the care of trauma patients. [Orthopedics. 2016; 39(4):249-259.]. PMID:27322172

  10. UTILIZATION OF LIGHTWEIGHT MATERIALS MADE FROM COAL GASIFICATION SLAGS

    SciTech Connect

    Vas Choudhry; Stephen Kwan; Steven R. Hadley

    2001-07-01

    The objective of the project entitled ''Utilization of Lightweight Materials Made from Coal Gasification Slags'' was to demonstrate the technical and economic viability of manufacturing low-unit-weight products from coal gasification slags which can be used as substitutes for conventional lightweight and ultra-lightweight aggregates. In Phase I, the technology developed by Praxis to produce lightweight aggregates from slag (termed SLA) was applied to produce a large batch (10 tons) of expanded slag using pilot direct-fired rotary kilns and a fluidized bed calciner. The expanded products were characterized using basic characterization and application-oriented tests. Phase II involved the demonstration and evaluation of the use of expanded slag aggregates to produce a number of end-use applications including lightweight roof tiles, lightweight precast products (e.g., masonry blocks), structural concrete, insulating concrete, loose fill insulation, and as a substitute for expanded perlite and vermiculite in horticultural applications. Prototypes of these end-use applications were made and tested with the assistance of commercial manufacturers. Finally, the economics of expanded slag production was determined and compared with the alternative of slag disposal. Production of value-added products from SLA has a significant potential to enhance the overall gasification process economics, especially when the avoided costs of disposal are considered.

  11. Utilization of lightweight materials made from coal gasification slags

    SciTech Connect

    1996-07-08

    Praxis is working on a DOE/METC funded project to demonstrate the technical and economic feasibility of making lightweight and ultra- lightweight aggregates from slags left as solid by-products from the coal gasification process. These aggregates are produced by controlled heating of the slags to temperatures ranging between 1600 and 1900{degrees}F. Over 10 tons of expanded slag lightweight aggregates (SLA) were produced using a direct-fired rotary kiln and a fluidized bed calciner with unit weights varying between 20 and 50 lb/ft{sup 3}. The slag-based aggregates are being evaluated at the laboratory scale as substitutes for conventional lightweight aggregates in making lightweight structural concrete, roof tiles, blocks, insulating concrete, and a number of other applications. Based on the laboratory data, large-scale testing will be performed and the durability of the finished products evaluated. Conventional lightweight aggregates made from pyroprocessing expansible shales or clays are produced for $30/ton. The net production costs of SLA are in the range of $22 to $24/ton for large systems (44 t/d) and $26-$30/ton for small systems (220 t/d). Thus, the technology provides a good opportunity for economic use of gasification slags.

  12. Trauma-Informed or Trauma-Denied: Principles and Implementation of Trauma-Informed Services for Women

    ERIC Educational Resources Information Center

    Elliott, Denise E.; Bjelajac, Paula; Fallot, Roger D.; Markoff, Laurie S.; Reed, Beth Glover

    2005-01-01

    In this article, we attempt to bridge the gap between practice (service delivery) and philosophy (trauma theory, empowerment, and relational theory). Specifically, we identify 10 principles that define trauma-informed service, discuss the need for this type of service, and give some characteristics of trauma-informed services in eight different…

  13. Resuscitative thoracotomy in penetrating trauma.

    PubMed

    Fairfax, Lindsay M; Hsee, Li; Civil, Ian D

    2015-06-01

    The resuscitative thoracotomy (RT) is an important procedure in the management of penetrating trauma. As it is performed only in patients with peri-arrest physiology or overt cardiac arrest, survival is low. Experience is also quite variable depending on volume of penetrating trauma in a particular region. Survival ranges from 0% to as high as 89% depending on patient selection, available resources, and location of RT (operating or emergency rooms). In this article, published guidelines are reviewed as well as outcomes. Technical considerations of RT and well as proper training, personnel, and location are also discussed. PMID:25342073

  14. Component separation in abdominal trauma.

    PubMed

    Rawstorne, Edward; Smart, Christopher J; Fallis, Simon A; Suggett, Nigel

    2014-01-01

    Component separation is established for complex hernia repairs. This case presents early component separation and release of the anterior and posterior sheath to facilitate closure of the abdominal wall following emergency laparotomy, reinforcing the repair with a biological mesh. On Day 11 following an emergency laparotomy for penetrating trauma, this patient underwent component separation and release of the anterior and posterior sheath. An intra-abdominal biological mesh was secured, and the fascia and skin closed successfully. Primary abdominal closure can be achieved in patients with penetrating abdominal trauma with the use of component separation and insertion of intra-abdominal biological mesh, where standard closure is not possible. PMID:24876334

  15. Acoustic trauma caused by lightning.

    PubMed

    Mora-Magaña, I; Collado-Corona, M A; Toral-Martiñòn, R; Cano, A

    1996-03-01

    Lesions produced by exposure to noise are frequent in everyday life. Injuries may be found in all systems of the human body, from the digestive to the endocrine, from the cardiovascular to the nervous system. Many organs may be damaged, the ear being one of them. It is known that noise produced by factories, airports, musical instruments and even toys can cause auditory loss. Noises in nature can also cause acoustic trauma. This report is the case history of acoustic trauma caused by lightning. The patient was studied with CAT scan, electroencephalogram, and brain mapping, impedance audiometry with tympanogram and acoustic reflex, audiometry and evoked otoacoustics emissions: distortion products and transients. PMID:8882110

  16. [Polyvagal theory and emotional trauma].

    PubMed

    Leikola, Anssi; Mäkelä, Jukka; Punkanen, Marko

    2016-01-01

    According to the polyvagal theory, the autonomic nervous system can, in deviation from the conventional theory, be divided in three distinct parts that are in hierarchical relationship with each other. The most-primitive autonomic control results in depression of vital functions, the more evolved one in fighting or escape and the most evolved one in social involvement. Practical application of the polyvagal theory has resulted in positive results above all in the treatment of emotional trauma. in Finland, therapy of complex trauma is founded on the theory of structural dissociation of the personality, which together with the polyvagal theory forms a practical frame of reference for psychotherapeutic work. PMID:27044181

  17. Thromboembolic Disease After Orthopedic Trauma.

    PubMed

    Whiting, Paul S; Jahangir, A Alex

    2016-04-01

    Orthopedic trauma results in systemic physiologic changes that predispose patients to venous thromboembolism (VTE). In the absence of prophylaxis, VTE incidence may be as high as 60%. Mechanical and pharmacologic thromboprophylaxis are effective in decreasing rates of VTE. Combined mechanical and pharmacologic thromboprophylaxis is more efficacious for decreasing VTE incidence than either regimen independently. If pharmacologic thromboprophylaxis is contraindicated, mechanical prophylaxis should be used. Patients with isolated lower extremity fractures who are ambulatory, or those with isolated upper extremity trauma, do not require pharmacologic prophylaxis in the absence of other VTE risk factors. PMID:26772942

  18. Light-weight radioisotope heater impact tests

    SciTech Connect

    Reimus, M.A.H.; Rinehart, G.H.; Herrera, A.

    1998-12-31

    The light-weight radioisotope heater unit (LWRHU) is a {sup 238}PuO{sub 2}-fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed {sup 238}PuO{sub 2} fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. To compare the performance of the LWRHUs fabricated for the Cassini mission with the performance of those fabricated for the Galileo mission, and to determine a failure threshold, two types of impact tests were conducted. A post-reentry impact test was performed on one of 180 flight-quality units produced for the Cassini mission and a series of sequential impact tests using simulant-fueled LWRHU capsules were conducted respectively. The results showed that deformation and fuel containment of the impacted Cassini LWRHU was similar to that of a previously tested Galileo LWRHU. Both units sustained minimal deformation of the aeroshell and fueled capsule; the fuel was entirely contained by the platinum capsule. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s.

  19. LVD: A Lightweight Virtual Desktop Management Architecture

    NASA Astrophysics Data System (ADS)

    Liao, Xiaofei; Xiong, Xianjie; Jin, Hai; Hu, Liting

    Rapid improvements in network bandwidth, ubiquitous security hazards and high total cost of ownership of personal computers have created a growing market for desktop virtualization. We present the LVD, a system that combines the virtualization technology and inexpensive personal computers (PCs) to realize a lightweight virtual desktop system. Compared with the previous thin client systems, LVD supports the backup, mobility, suspending and resuming of per-user’s working environment; it supports the customization of operating system and applications for each user; it supports synchronous using of incompatible applications on different platforms; it achieves great saving in power consumption. LVD consists of five modules— the template-based VM repository, the data center, the application cluster, the VM central manager, and the client terminal, in which we have proposed wRFB protocol, magnet algorithm and the like to perform the above functions. We have implemented LVD in a cluster with VMs and compared its performance against widely used commercial approaches. Experimental results demonstrate that LVD is effective in performing the functions while imposing little overhead.

  20. Lightweight Radiator System for a Spacecraft

    NASA Technical Reports Server (NTRS)

    Copeland, Robert J.; Mason, Georgia; Weislogel, Mark M.

    2005-01-01

    Three documents describe various aspects of a proposed lightweight, deployable radiator system for dissipating excess heat from the life-support system of a habitable spacecraft. The first document focuses on a radiator tube that would include a thin metal liner surrounded and supported by a thicker carbon-fiber-reinforced composite tubular structure that, in turn, would be formed as part of a unitary composite radiator-fin structure consisting mostly of a sheet of reticulated vitreous carbon laminated between carbon-fiber-reinforced face sheets. The thermal and mechanical properties, including the anisotropies, of the component materials are taken into account in the design. The second document describes thermo-structural bumpers, in the form of exterior multiple-ply carbon-fiber sheets enclosing hollows on opposite sides of a radiator fin, which would protect the radiator tube against impinging micrometeors and orbital debris. The third document describes a radiator system that would include multiple panels containing the aforementioned components, among others. The system would also include mechanisms for deploying the panels from compact stowage. Deployment would not involve breaking and remaking of fluid connections to the radiator panels.

  1. Lightweight and scalable secure communication in VANET

    NASA Astrophysics Data System (ADS)

    Zhu, Xiaoling; Lu, Yang; Zhu, Xiaojuan; Qiu, Shuwei

    2015-05-01

    To avoid a message to be tempered and forged in vehicular ad hoc network (VANET), the digital signature method is adopted by IEEE1609.2. However, the costs of the method are excessively high for large-scale networks. The paper efficiently copes with the issue with a secure communication framework by introducing some lightweight cryptography primitives. In our framework, point-to-point and broadcast communications for vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) are studied, mainly based on symmetric cryptography. A new issue incurred is symmetric key management. Thus, we develop key distribution and agreement protocols for two-party key and group key under different environments, whether a road side unit (RSU) is deployed or not. The analysis shows that our protocols provide confidentiality, authentication, perfect forward secrecy, forward secrecy and backward secrecy. The proposed group key agreement protocol especially solves the key leak problem caused by members joining or leaving in existing key agreement protocols. Due to aggregated signature and substitution of XOR for point addition, the average computation and communication costs do not significantly increase with the increase in the number of vehicles; hence, our framework provides good scalability.

  2. Lightweight Reusable Solar Array For Balloons

    NASA Astrophysics Data System (ADS)

    Aaron, K.; Tensor, P.; Nock, K.; Wyszkowski, C.

    We will discuss a new lightweight reusable solar array system, dubbed HighPower, which is being developed for the Ultra-Long Duration Balloon (ULDB) program using NASA/SBIR funding, but which is also applicable to other balloon systems. The system uses a vertically deployed stack of panels suspended from their corners by cables. The stack act likes a two-dimensional Venetian blind. By raising and lowering opposite corners, the array of parallel panels can be pointed over most of the upper hemisphere. This allows the panels to remain normal to the sun despite the slow rotation of the gondola and without requiring rotation of the system (no slip rings) or heavy cantilevered rotation joints. The system is sized to generate 2000 W using six 2m x 2m panels. The modularity of the system allows panels to be added or removed to tailored the power to the needs of the mission. Prior to cut -down of the balloon, the panels can be retracted and stowed compactly in the lower part of the gondola. This will protect the array during landing, allowing the array to be reused on subsequent flights.

  3. Lightweight sidewalls for aircraft interior noise control

    NASA Technical Reports Server (NTRS)

    May, D. N.; Plotkin, K. J.; Selden, R. G.; Sharp, B. H.

    1985-01-01

    A theoretical and experimental study was performed to devise lightweight sidewalls for turboprop aircraft. Seven concepts for new sidewalls were analyzed and tested for noise reduction using flat panels of 1.2 m x 1.8 m (4 ft x 6 ft), some of which were aircraft-type constructions and some of which were simpler, easier-to-construct panels to test the functioning of an acoustic principle. Aircraft-application sidewalls were then conceived for each of the seven concepts, and were subjectively evaluated for their ability to meet aircraft nonacoustic design requirements. As a result of the above, the following sidewall concepts were recommended for further investigation: a sidewall in which the interior cavity is vented to ceiling and underfloor areas; sidewalls with wall-mounted resonators, one having a conventional trim panel and one a limp one; and a sidewall with a stiff outer wall and a limp trim panel. These sidewalls appear to promise lower weights than conventional sidewalls adjusted to meet similar acoustic requirements, and further development may prove them to be practical.

  4. Lightweight Solar Power for Small Satellites

    NASA Technical Reports Server (NTRS)

    Nabors, Sammy A.

    2015-01-01

    The innovation targets small satellites or CubeSats for which conventional deployable arrays are not feasible due to their size, weight and complexity. This novel solar cell array includes a thin and flexible photovoltaic cell applied to an inflatable structure to create a high surface area array for collecting solar energy in a lightweight, simple and deployable structure. The inflatable array, with its high functional surface area, eliminates the need and the mechanisms required to point the system toward the sun. The power density achievable in these small arrays is similar to that of conventional high-power deployable/pointable arrays used on large satellites or space vehicles. Although inflatable solar arrays have been previously considered by others, the arrays involved the use of traditional rigid solar cells. Researchers are currently working with thin film photovoltaics from various suppliers so that the NASA innovation is not limited to any particular solar cell technology. NASA has built prototypes and tested functionality before and after inflation. As shown in the current-voltage currents below, deployment does not damage the cell performance.

  5. Advanced technology lightweight fuel cell program

    NASA Technical Reports Server (NTRS)

    Martin, R. E.

    1981-01-01

    The potential of the alkaline electrolyte fuel cell as the power source in a multi hundred kilowatt orbital energy storage system was studied. The total system weight of an electrolysis cell energy storage system was determined. The tests demonstrated: (1) the performance stability of a platinum on carbon anode catalyst configuration after 5000 hours of testing has no loss in performance; (2) capability of the alkaline fuel cell to operate to a cyclical load profile; (3) suitability of a lightweight graphite electrolyte reservoir plate for use in the alkaline fuel cell; (4) long life potential of a hybrid polysulfone cell edge frame construction; and (5) long term stability of a fiber reinforced potassium titanate matrix structure. The power section tested operates with passive water removal eliminating the requirement for a dynamic hydrogen pump water separator thereby allowing a powerplant design with reduced weight, lower parasite power, and a potential for high reliability and extended endurance. It is concluded that two perovskites are unsuitable for use as a catalyst or as a catalyst support at the cathode of an alkaline fuel cell.

  6. Novel hyperspectral imager for lightweight UAVs

    NASA Astrophysics Data System (ADS)

    Saari, Heikki; Aallos, Ville-Veikko; Holmlund, Christer; Mäkynen, Jussi; Delauré, Bavo; Nackaerts, Kris; Michiels, Bart

    2010-04-01

    VTT Technical Research Centre of Finland has developed a new miniaturized staring hyperspectral imager with a weight of 350 g making the system compatible with lightweight UAS platforms. The instrument is able to record 2D spatial images at the selected wavelength bands simultaneously. The concept of the hyperspectral imager has been published in the SPIE Proc. 74741. The operational wavelength range of the imager can be tuned in the range 400 - 1100 nm and spectral resolution is in the range 5 - 10 nm @ FWHM. Presently the spatial resolution is 480 × 750 pixels but it can be increased simply by changing the image sensor. The field of view of the system is 20 × 30 degrees and ground pixel size at 100 m flying altitude is around 7.5 cm. The system contains batteries, image acquisition control system and memory for the image data. It can operate autonomously recording hyperspectral data cubes continuously or controlled by the autopilot system of the UAS. The new hyperspectral imager prototype was first tried in co-operation with the Flemish Institute for Technological Research (VITO) on their UAS helicopter. The instrument was configured for the spectral range 500 - 900 nm selected for the vegetation and natural water monitoring applications. The design of the UAS hyperspectral imager and its characterization results together with the analysis of the spectral data from first test flights will be presented.

  7. Warm Hydroforming of Lightweight Metal Sheets

    SciTech Connect

    Aginagalde, A.; Orus, A.; Esnaola, J. A.; Torca, I.; Galdos, L.; Garcia, C.

    2007-05-17

    Hydroforming is well known in steel applications for automotive industry, where complicated shapes can be get with high strength to weight ratios. Nevertheless, the poor formability of light alloys at room temperature has limited the application of hydroforming technology for aluminum and magnesium parts. Increasing the temperature of these materials allows substantially greater elongation without fracture. Warm forming strategy is applied in conventional processes, such as rolling and forging, in order to get complex shapes, but still rare in hydroforming technology. This is the technical base of this research project: the development of the hydroforming process at warm working temperatures. The main tasks of the initial phases of the research were the material characterization, and the heated fluid and tooling system design and set up for warm hydroforming of lightweight alloys. Once these goals were accomplished the present paper shows the obtained results. The uniaxial tensile deformation of 5754H111, 6082-T6, 6082-O and AZ31B at the temperature range of 25 deg. C - 250 deg. C is presented as the output of the material characterization task. Both the system features and the results obtained for a bulge test geometry carried out with a warm hydroforming system are also presented. The selected alloys show an improvement in formability at the studied temperature range under both uniaxial and biaxial state of stress.

  8. Testnodes: a Lightweight Node-Testing Infrastructure

    NASA Astrophysics Data System (ADS)

    Fay, R.; Bland, J.

    2014-06-01

    A key aspect of ensuring optimum cluster reliability and productivity lies in keeping worker nodes in a healthy state. Testnodes is a lightweight node testing solution developed at Liverpool. While Nagios has been used locally for general monitoring of hosts and services, Testnodes is optimised to answer one question: is there any reason this node should not be accepting jobs? This tight focus enables Testnodes to inspect nodes frequently with minimal impact and provide a comprehensive and easily extended check with each inspection. On the server side, Testnodes, implemented in python, interoperates with the Torque batch server to control the nodes production status. Testnodes remotely and in parallel executes client-side test scripts and processes the return codes and output, adjusting the node's online/offline status accordingly to preserve the integrity of the overall batch system. Testnodes reports via log, email and Nagios, allowing a quick overview of node status to be reviewed and specific node issues to be identified and resolved quickly. This presentation will cover testnodes design and implementation, together with the results of its use in production at Liverpool, and future development plans.

  9. Clover: Compiler directed lightweight soft error resilience

    SciTech Connect

    Liu, Qingrui; Lee, Dongyoon; Jung, Changhee; Tiwari, Devesh

    2015-05-01

    This paper presents Clover, a compiler directed soft error detection and recovery scheme for lightweight soft error resilience. The compiler carefully generates soft error tolerant code based on idem-potent processing without explicit checkpoint. During program execution, Clover relies on a small number of acoustic wave detectors deployed in the processor to identify soft errors by sensing the wave made by a particle strike. To cope with DUE (detected unrecoverable errors) caused by the sensing latency of error detection, Clover leverages a novel selective instruction duplication technique called tail-DMR (dual modular redundancy). Once a soft error is detected by either the sensor or the tail-DMR, Clover takes care of the error as in the case of exception handling. To recover from the error, Clover simply redirects program control to the beginning of the code region where the error is detected. Lastly, the experiment results demonstrate that the average runtime overhead is only 26%, which is a 75% reduction compared to that of the state-of-the-art soft error resilience technique.

  10. Clover: Compiler directed lightweight soft error resilience

    DOE PAGESBeta

    Liu, Qingrui; Lee, Dongyoon; Jung, Changhee; Tiwari, Devesh

    2015-05-01

    This paper presents Clover, a compiler directed soft error detection and recovery scheme for lightweight soft error resilience. The compiler carefully generates soft error tolerant code based on idem-potent processing without explicit checkpoint. During program execution, Clover relies on a small number of acoustic wave detectors deployed in the processor to identify soft errors by sensing the wave made by a particle strike. To cope with DUE (detected unrecoverable errors) caused by the sensing latency of error detection, Clover leverages a novel selective instruction duplication technique called tail-DMR (dual modular redundancy). Once a soft error is detected by either themore » sensor or the tail-DMR, Clover takes care of the error as in the case of exception handling. To recover from the error, Clover simply redirects program control to the beginning of the code region where the error is detected. Lastly, the experiment results demonstrate that the average runtime overhead is only 26%, which is a 75% reduction compared to that of the state-of-the-art soft error resilience technique.« less

  11. Lightweight autonomous chemical identification system (LACIS)

    NASA Astrophysics Data System (ADS)

    Lozos, George; Lin, Hai; Burch, Timothy

    2012-06-01

    Smiths Detection and Intelligent Optical Systems have developed prototypes for the Lightweight Autonomous Chemical Identification System (LACIS) for the US Department of Homeland Security. LACIS is to be a handheld detection system for Chemical Warfare Agents (CWAs) and Toxic Industrial Chemicals (TICs). LACIS is designed to have a low limit of detection and rapid response time for use by emergency responders and could allow determination of areas having dangerous concentration levels and if protective garments will be required. Procedures for protection of responders from hazardous materials incidents require the use of protective equipment until such time as the hazard can be assessed. Such accurate analysis can accelerate operations and increase effectiveness. LACIS is to be an improved point detector employing novel CBRNE detection modalities that includes a militaryproven ruggedized ion mobility spectrometer (IMS) with an array of electro-resistive sensors to extend the range of chemical threats detected in a single device. It uses a novel sensor data fusion and threat classification architecture to interpret the independent sensor responses and provide robust detection at low levels in complex backgrounds with minimal false alarms. The performance of LACIS prototypes have been characterized in independent third party laboratory tests at the Battelle Memorial Institute (BMI, Columbus, OH) and indoor and outdoor field tests at the Nevada National Security Site (NNSS). LACIS prototypes will be entering operational assessment by key government emergency response groups to determine its capabilities versus requirements.

  12. Warm Hydroforming of Lightweight Metal Sheets

    NASA Astrophysics Data System (ADS)

    Aginagalde, A.; Orus, A.; Esnaola, J. A.; Torca, I.; Galdos, L.; García, C.

    2007-05-01

    Hydroforming is well known in steel applications for automotive industry, where complicated shapes can be get with high strength to weight ratios. Nevertheless, the poor formability of light alloys at room temperature has limited the application of hydroforming technology for aluminum and magnesium parts. Increasing the temperature of these materials allows substantially greater elongation without fracture. Warm forming strategy is applied in conventional processes, such as rolling and forging, in order to get complex shapes, but still rare in hydroforming technology. This is the technical base of this research project: the development of the hydroforming process at warm working temperatures. The main tasks of the initial phases of the research were the material characterization, and the heated fluid and tooling system design and set up for warm hydroforming of lightweight alloys. Once these goals were accomplished the present paper shows the obtained results. The uniaxial tensile deformation of 5754H111, 6082-T6, 6082-O and AZ31B at the temperature range of 25°C-250°C is presented as the output of the material characterization task. Both the system features and the results obtained for a bulge test geometry carried out with a warm hydroforming system are also presented. The selected alloys show an improvement in formability at the studied temperature range under both uniaxial and biaxial state of stress.

  13. Management of ocular, orbital, and adnexal trauma

    SciTech Connect

    Spoor, T.C.; Nesi, F.A.

    1988-01-01

    This book contains 20 chapters. Some of the chapter titles are: The Ruptured Globe: Primary Care; Corneal Trauma, Endophthalmitis; Antibiotic Usage; Radiology of Orbital Trauma; Maxillofacial Fractures; Orbital Infections; and Basic Management of Soft Tissue Injury.

  14. Acoustic Trauma - Hearing Loss in Teenagers

    MedlinePlus

    ... Issues Listen Español Text Size Email Print Share Acoustic Trauma - Hearing Loss in Teenagers Page Content Article ... temporary or permanent hearing loss. This is called acoustic trauma. How loud is 85 decibels? Surprisingly, not ...

  15. Process of constructing a lightweight x-ray flight mirror assembly

    NASA Astrophysics Data System (ADS)

    McClelland, Ryan S.; Biskach, Michael P.; Chan, Kai-Wing; Espina, Rebecca A.; Hohl, Bruce R.; Saha, Timo T.; Zhang, William W.

    2014-07-01

    Lightweight and high resolution optics are needed for future space-based x-ray telescopes to achieve advances in highenergy astrophysics. NASA's Next Generation X-ray Optics (NGXO) project has made significant progress towards building such optics, both in terms of maturing the technology for spaceflight readiness and improving the angular resolution. Technology Development Modules (TDMs) holding three pairs of mirrors have been regularly and repeatedly integrated and tested both for optical performance and mechanical strength. X-ray test results have been improved over the past year from 10.3 arc-seconds Half Power Diameter (HPD) to 8.3 arc-seconds HPD. A vibration test has been completed to NASA standard verification levels showing the optics can survive launch and pointing towards improvements in strengthening the modules through redundant bonds. A Finite Element Analysis (FEA) study was completed which shows the mirror distortion caused by bonding is insensitive to the number of bonds. Next generation TDMs, which will demonstrate a lightweight structure and mount additional pairs of mirrors, have been designed and fabricated. The light weight of the module structure is achieved through the use of E-60 Beryllium Oxide metal matrix composite material. As the angular resolution of the development modules has improved, gravity distortion during horizontal x-ray testing has become a limiting factor. To address this issue, a facility capable of testing in the vertical orientation has been designed and planned. Test boring at the construction site suggest standard caisson construction methods can be utilized to install a subterranean vertical vacuum pipe. This facility will also allow for the testing of kinematically mounted mirror segments, which greatly reduces the effect of bonding displacements. A development platform demonstrating the feasibility of kinematically mounting mirror segments has been designed, fabricated, and successfully tested.

  16. Advances in the Lightweight Air-Liquid Composite Heat Exchanger Development for Space Exploration Applications

    NASA Technical Reports Server (NTRS)

    Shin, E. Eugene; Johnston, J. Chris; Haas, Daniel

    2011-01-01

    An advanced, lightweight composite modular Air/Liquid (A/L) Heat Exchanger (HX) Prototype for potential space exploration thermal management applications was successfully designed, manufactured, and tested. This full-scale Prototype consisting of 19 modules, based on recommendations from its predecessor Engineering Development unit (EDU) but with improved thermal characteristics and manufacturability, was 11.2 % lighter than the EDU and achieves potentially a 42.7% weight reduction from the existing state-of-the-art metallic HX demonstrator. However, its higher pressure drop (0.58 psid vs. 0.16 psid of the metal HX) has to be mitigated by foam material optimizations and design modifications including a more systematic air channel design. Scalability of the Prototype design was validated experimentally by comparing manufacturability and performance between the 2-module coupon and the 19-module Prototype. The Prototype utilized the thermally conductive open-cell carbon foam material but with lower density and adopted a novel high-efficiency cooling system with significantly increased heat transfer contact surface areas, improved fabricability and manufacturability compared to the EDU. Even though the Prototype was required to meet both the thermal and the structural specifications, accomplishing the thermal requirement was a higher priority goal for this first version. Overall, the Prototype outperformed both the EDU and the corresponding metal HX, particularly in terms of specific heat transfer, but achieved 93.4% of the target. The next generation Prototype to achieve the specification target, 3,450W would need 24 core modules based on the simple scaling factor. The scale-up Prototype will weigh about 14.7 Kg vs. 21.6 Kg for the metal counterpart. The advancement of this lightweight composite HX development from the original feasibility test coupons to EDU to Prototype is discussed in this paper.

  17. TraumaSCAN: assessing penetrating trauma with geometric and probabilistic reasoning.

    PubMed Central

    Ogunyemi, O.; Clarke, J. R.; Webber, B.; Badler, N.

    2000-01-01

    This paper presents TraumaSCAN, a prototype computer system for assessing the effects of penetrating trauma to the chest and abdomen. TraumaSCAN combines geometric reasoning about potentially injured anatomic structures with (probabilistic) diagnostic reasoning about the consequences of these injuries. We also present results obtained from testing TraumaSCAN retrospectively on 26 actual gunshot wound cases. PMID:11079958

  18. How regional trauma systems improve outcomes.

    PubMed

    Cole, Elaine

    2015-10-01

    Management of severely injured patients is complex and requires organised, expert care. Regionalised trauma systems are relatively new in the UK and aim to deliver optimal, timely care to injured patients at the most appropriate location. This article discusses the drivers, organisation, processes and outcomes of regionalised trauma care. It also describes the challenges and benefits of working within a trauma system to enable emergency practitioners to reflect on their roles in contemporary trauma care. PMID:26451941

  19. Computed tomography in the evaluation of trauma

    SciTech Connect

    Federle, M.P.; Brant-Zawadzki, M.

    1982-01-01

    This book is intended to be the current standard for computed tomography in the evaluation of trauma. It summarizes two years of experience at San Francisco General Hospital. The book is organized into seven chapters, covering head, maxillofacial, laryngeal, spinal, chest, abdominal, acetabular, and pelvic trauma. Extremity trauma is not discussed.

  20. Helpers in Distress: Preventing Secondary Trauma

    ERIC Educational Resources Information Center

    Whitfield, Natasha; Kanter, Deborah

    2014-01-01

    Those in close contact with trauma survivors are themselves at risk for trauma (e.g., Bride, 2007; Figley, 1995). Family, friends, and professionals who bear witness to the emotional retelling and re-enacting of traumatic events can experience what is called "secondary trauma" (Elwood, Mott, Lohr, & Galovski, 2011). The literature…

  1. Facial nerve palsy due to birth trauma

    MedlinePlus

    Seventh cranial nerve palsy due to birth trauma ... these factors do not lead to facial nerve palsy or birth trauma. ... The most common form of facial nerve palsy due to birth trauma ... This part controls the muscles around the lips. The muscle ...

  2. Cultural Differences in Autobiographical Memory of Trauma

    ERIC Educational Resources Information Center

    Jobson, Laura; O'Kearney, Richard

    2006-01-01

    This study investigated cultural differences in autobiographical memory of trauma. Australian and Asian international students provided self-defining memories, narratives of everyday and trauma memories and self-reports assessing adjustment to the trauma. No cultural distinction was found in how Australian or Asian subjects remembered a personal…

  3. Influence of interactions between genes and childhood trauma on refractoriness in psychiatric disorders.

    PubMed

    Kim, Ji Sun; Lee, Seung-Hwan

    2016-10-01

    Psychiatric disorders are excellent disease models in which gene-environmental interaction play a significant role in the pathogenesis. Childhood trauma has been known as a significant environmental factor in the progress of, and prognosis for psychiatric illness. Patients with refractory illness usually have more severe symptoms, greater disability, lower quality of life and are at greater risk of suicide than other psychiatric patients. Our literature review uncovered some important clinical factors which modulate response to treatment in psychiatric patients who have experienced childhood trauma. Childhood trauma seems to be a critical determinant of treatment refractoriness in psychotic disorder, bipolar disorder, major depressive disorder, and post-traumatic stress disorder. In patients with psychotic disorders, the relationship between childhood trauma and treatment-refractoriness appears to be mediated by cognitive impairment. In the case of bipolar disorder, the relationship appears to be mediated by greater affective disturbance and earlier onset, while in major depressive disorder the mediating factors are persistent, severe symptoms and frequent recurrence. In suicidal individuals, childhood maltreatment was associated with violent suicidal attempts. In the case of PTSD patients, it appears that childhood trauma makes the brain more vulnerable to subsequent trauma, thus resulting in more severe, refractory symptoms. Given that several studies have suggested that there are distinct subtypes of genetic vulnerability to childhood trauma, it is important to understand how gene-environment interactions influence the course of psychiatric illnesses in order to improve therapeutic strategies. PMID:26827636

  4. The management of liver trauma.

    PubMed Central

    Macfarlane, R.

    1985-01-01

    Despite advances in the management of liver trauma during the past 40 years, haemorrhage has remained the commonest cause of death. This article outlines the diversity of opinion between the desire to determine the extent of damage and resect devitalised tissue with its attendant risk of exacerbating haemorrhage, and the alternative of a more conservative approach. PMID:3895205

  5. Transforming Cultural Trauma into Resilience

    ERIC Educational Resources Information Center

    Brokenleg, Martin

    2012-01-01

    One of the biggest challenges facing Aboriginal populations increasingly is being called "intergenerational trauma." Restoring the cultural heritage is a central theme in the book, "Reclaiming Youth at Risk." That work describes the Circle of Courage model for positive development which blends Native child and youth care philosophy with research…

  6. Hypothermia and the trauma patient

    PubMed Central

    Kirkpatrick, Andrew W.; Chun, Rosaleen; Brown, Ross; Simons, Richard K.

    Hypothermia has profound effects on every system in the body, causing an overall slowing of enzymatic reactions and reduced metabolic requirements. Hypothermic, acutely injured patients with multisystem trauma have adverse outcomes when compared with normothermic control patients. Trauma patients are inherently predisposed to hypothermia from a variety of intrinsic and iatrogenic causes. Coagulation and cardiac sequelae are the most pertinent physiological concerns. Hypothermia and coagulopathy often mandate a simplified approach to complex surgical problems. A modification of traditional classification systems of hypothermia, applicable to trauma patients is suggested. There are few controlled investigations, but clinical opinion strongly supports the active prevention of hypothermia in the acutely traumatized patient. Preventive measures are simple and inexpensive, but the active reversal of hypothermia is much more complicated, often invasive and controversial. The ideal method of rewarming is unclear but must be individualized to the patient and is institution specific. An algorithm reflecting newer approaches to traumatic injury and technical advances in equipment and techniques is suggested. Conversely, hypothermia has selected clinical benefits when appropriately used in cases of trauma. Severe hypothermia has allowed remarkable survivals in the course of accidental circulatory arrest. The selective application of mild hypothermia in severe traumatic brain injury is an area with promise. Deliberate circulatory arrest with hypothermic cerebral protection has also been used for seemingly unrepairable injuries and is the focus of ongoing research. PMID:10526517

  7. Neuropathology of Acquired Cerebral Trauma.

    ERIC Educational Resources Information Center

    Bigler, Erin D.

    1987-01-01

    To help educators understand the cognitive and behavioral sequelae of cerebral injury, the neuropathology of traumatic brain injury and the main neuropathological features resulting from trauma-related brain damage are reviewed. A glossary with definitions of 37 neurological terms is appended. (Author/DB)

  8. Management of hemorrhage in trauma.

    PubMed

    Schöchl, Herbert; Grassetto, Alberto; Schlimp, Christoph J

    2013-08-01

    Hemorrhage remains one of the leading causes of trauma-related deaths. Uncontrolled diffuse microvascular bleeding in the course of initial care is common, potentially resulting in exsanguination. Early and aggressive hemostatic intervention increases survival and reduces the incidence of massive transfusion. Thus, timely diagnosis of the underlying coagulation disorders is mandatory. It has been shown that standard coagulation tests do not sufficiently characterize trauma-induced coagulopathy (TIC). This has led to increasing interest in alternatives, such as the viscoelastic test, to diagnose TIC and to provide the basis for a goal-directed hemostatic therapy. The concept of damage control resuscitation (DCR) has been introduced widely in trauma patients with severe bleeding. This strategy addresses important confounders of the coagulation process such as hemodilution, hypothermia, and acidosis; DCR is based on a damage control surgical approach, permissive hypotension, and improvement of hemostatic competence. Many studies have shown benefit in mortality when using high ratios of fresh frozen plasma (FFP) to red blood cells (RBC) as early treatment. However, there is increased awareness that coagulation factor concentrate could be beneficial in the treatment of trauma-induced coagulopathy. PMID:23910535

  9. Medicating Relational Trauma in Youth

    ERIC Educational Resources Information Center

    Foltz, Robert

    2008-01-01

    Children who have experienced relational trauma present a host of problems and are often diagnosed with psychiatric disorders and then medicated. But there is evidence that commonly used drugs interfere with oxytocin or vasopressin, the human trust and bonding hormones. Thus, psychotropic drugs may impair interpersonal relationships and impede…

  10. Transfusion management of trauma patients.

    PubMed

    Shaz, Beth H; Dente, Christopher J; Harris, Robert S; MacLeod, Jana B; Hillyer, Christopher D

    2009-06-01

    The management of massively transfused trauma patients has improved with a better understanding of trauma-induced coagulopathy, the limitations of crystalloid infusion, and the implementation of massive transfusion protocols (MTPs), which encompass transfusion management and other patient care needs to mitigate the "lethal triad" of acidosis, hypothermia, and coagulopathy. MTPs are currently changing in the United States and worldwide because of recent data showing that earlier and more aggressive transfusion intervention and resuscitation with blood components that approximate whole blood significantly decrease mortality. In this context, MTPs are a key element of "damage control resuscitation," which is defined as the systematic approach to major trauma that addresses the lethal triad mentioned above. MTPs using adequate volumes of plasma, and thus coagulation factors, improve patient outcome. The ideal amounts of plasma, platelet, cryoprecipitate and other coagulation factors given in MTPs in relationship to the red blood cell transfusion volume are not known precisely, but until prospective, randomized, clinical trials are performed and more clinical data are obtained, current data support a target ratio of plasma:red blood cell:platelet transfusions of 1:1:1. Future prospective clinical trials will allow continued improvement in MTPs and thus in the overall management of patients with trauma. PMID:19448199

  11. Ultralight photovoltaic modules for unmanned aerial vehicles

    SciTech Connect

    Nowlan, M.J.; Maglitta, J.C.; Darkazalli, G.; Lamp, T.

    1997-12-31

    New lightweight photovoltaic modules are being developed for powering high altitude unmanned aerial vehicles (UAVs). Modified low-cost terrestrial solar cell and module technologies are being applied to minimize vehicle cost. New processes were developed for assembling thin solar cells, encapsulant films, and cover films. An innovative by-pass diode mounting approach that uses a solar cell as a heat spreader was devised and tested. Materials and processes will be evaluated through accelerated environmental testing.

  12. Lightweight acoustic treatments for aerospace applications

    NASA Astrophysics Data System (ADS)

    Naify, Christina Jeanne

    2011-12-01

    Increase in the use of composites for aerospace applications has the benefit of decreased structural weight, but at the cost of decreased acoustic performance. Stiff, lightweight structures (such as composites) are traditionally not ideal for acoustic insulation applications because of high transmission loss at low frequencies. A need has thus arisen for effective sound insulation materials for aerospace and automotive applications with low weight addition. Current approaches, such as the addition of mass law dominated materials (foams) also perform poorly when scaled to small thickness and low density. In this dissertation, methods which reduce sound transmission without adding significant weight are investigated. The methods presented are intended to be integrated into currently used lightweight structures such as honeycomb sandwich panels and to cover a wide range of frequencies. Layering gasses of differing acoustic impedances on a panel substantially reduced the amount of sound energy transmitted through the panel with respect to the panel alone or an equivalent-thickness single species gas layer. The additional transmission loss derives from successive impedance mismatches at the interfaces between gas layers and the resulting inefficient energy transfer. Attachment of additional gas layers increased the transmission loss (TL) by as much as 17 dB at high (>1 kHz) frequencies. The location and ordering of the gasses with respect to the panel were important factors in determining the magnitude of the total TL. Theoretical analysis using a transfer matrix method was used to calculate the frequency dependence of sound transmission for the different configurations tested. The method accurately predicted the relative increases in TL observed with the addition of different gas layer configurations. To address low-frequency sound insulation, membrane-type locally resonant acoustic materials (LRAM) were fabricated, characterized, and analyzed to understand their

  13. Screening for trauma histories, posttraumatic stress disorder (PTSD), and subthreshold PTSD in psychiatric outpatients.

    PubMed

    Franklin, C Laurel; Sheeran, Thomas; Zimmerman, Mark

    2002-12-01

    The ability of the Structured Clinical Interview for DSM-IV (SCID) posttraumatic stress disorder (PTSD) module's screening question to identify individuals with PTSD or subthreshold PTSD was examined. First, the screen's sensitivity for detecting a trauma history was determined. Second, the incremental validity of a more thorough trauma assessment was examined by determining how many individuals responded negatively to the screen but then were diagnosed with PTSD or subthreshold PTSD. Last, the optimal SCID termination point for assessing subthreshold PTSD was determined. Using a trauma list increased the number of participants reporting a trauma; however, the SCID screen captured almost all individuals who had PTSD or subthreshold PTSD. When one screens for subthreshold PTSD, the SCID can be terminated on failure to meet Criterion B. PMID:12501572

  14. Autotransfusion utilization in abdominal trauma.

    PubMed

    Smith, L A; Barker, D E; Burns, R P

    1997-01-01

    The purpose of this review is to investigate the utility of autotransfusion in trauma patients in the past 3 years. A retrospective review was conducted of the charts for whom the Haemonetics Cell Saver autotransfusion device (Haemonetics Corp., Natick, MA) was utilized between January 1, 1993, and December 31, 1995. The estimated blood loss and quantity of blood transfused were noted for abdominal trauma patients. Costs of autotransfusion were then compared to estimated blood bank costs for this group. The Haemonetics Cell Saver autotransfusion device was requested for 592 cases from January 1, 1993, to December 31, 1995. Nonorthopedic trauma cases comprised 25 per cent of all autotransfusion cases. One hundred twenty-six patients had isolated abdominal trauma and had a mean estimated blood loss of 4864 +/- 6070 cc. The average volume of intraoperatively salvaged autologous blood transfused (autotransfusion) per patient was 1547 +/- 2359 cc, or a bank blood equivalent of 6.9 units of packed red blood cells. The total cost of autotransfusion in these patients was $63,252.00. Had bank blood been used instead of salvaged autologous blood, the cost would have been $114,523.00; thus, autotransfusion resulted in a savings of $51,271.00. The use of salvaged autologous blood comprised 45 per cent of total blood transfused. On a case-by-case basis, 75 per cent of cases were cost-effective compared to blood bank costs for an equivalent transfusion. Transfusion of intraoperatively salvaged autologous blood (autotransfusion) is a cost-effective, efficient way to provide blood products to operative trauma patients. PMID:8985070

  15. Next generation lightweight mirror modeling software

    NASA Astrophysics Data System (ADS)

    Arnold, William R.; Fitzgerald, Matthew; Rosa, Rubin Jaca; Stahl, H. Philip

    2013-09-01

    The advances in manufacturing techniques for lightweight mirrors, such as EXELSIS deep core low temperature fusion, Corning's continued improvements in the Frit bonding process and the ability to cast large complex designs, combined with water-jet and conventional diamond machining of glasses and ceramics has created the need for more efficient means of generating finite element models of these structures. Traditional methods of assembling 400,000 + element models can take weeks of effort, severely limiting the range of possible optimization variables. This paper will introduce model generation software developed under NASA sponsorship for the design of both terrestrial and space based mirrors. The software deals with any current mirror manufacturing technique, single substrates, multiple arrays of substrates, as well as the ability to merge submodels into a single large model. The modeler generates both mirror and suspension system elements, suspensions can be created either for each individual petal or the whole mirror. A typical model generation of 250,000 nodes and 450,000 elements only takes 3-5 minutes, much of that time being variable input time. The program can create input decks for ANSYS, ABAQUS and NASTRAN. An archive/retrieval system permits creation of complete trade studies, varying cell size, depth, and petal size, suspension geometry with the ability to recall a particular set of parameters and make small or large changes with ease. The input decks created by the modeler are text files which can be modified by any text editor, all the shell thickness parameters and suspension spring rates are accessible and comments in deck identify which groups of elements are associated with these parameters. This again makes optimization easier. With ANSYS decks, the nodes representing support attachments are grouped into components; in ABAQUS these are SETS and in NASTRAN as GRIDPOINT SETS, this make integration of these models into large telescope or satellite

  16. Novel lightweight uncooled thermal weapon sight

    NASA Astrophysics Data System (ADS)

    Bergeron, Alain; Jerominek, Hubert; Lacoursiere, Jean; Desnoyers, Nichola; Alain, Christine; Laou, Philips

    2004-08-01

    INO in collaboration with DRDC Valcartier has been involved in the design and development of uncooled IR bolometric detector technology since the early 1990s for a broad range of military and commercial applications. From the beginning, the strategy has been to develop small-size bidimensional detector arrays and specialty linear arrays, both equipped with on-chip readout electronics. The detector arrays have been implemented in various instruments for both imaging and non-imaging applications. This paper describes two TWS1 and TWS2 prototypes of single band thermal weapon sights (TWS) making use of a novel catadioptric, i.e. refractive/reflective, optics and INO's miniature IR cameras. These cameras employ a 160x120 pixel uncooled bolometric FPA with a 52 μm pitch and NETD at 50 mK, and modular electronics consisting of three boards stacked together to fit into a 3-inch cube volume. The ultra lightweight catadioptric objective is inherently athermalized in the -30°C to +40°C range. The TWS1 is also equipped with a miniature RF link allowing bi-directional video transmission. This TWS1 weighs only 900 g and has a total volume of about 75 in3. Its power consumption is 2 W. The experimental performance showed that human detection, recognition and identification could be achieved at 800 m, 200 m, and 120 m, respectively. Construction of an improved TWS2 model is in progress. The objective is the reduction of TWS2 model weight down to 700 g, its volume down to 50 in3, replacing the RF video link with a wireless digital link, and increasing resolution to 320x240 pixels.

  17. Next Generation Lightweight Mirror Modeling Software

    NASA Technical Reports Server (NTRS)

    Arnold, William R., Sr.; Fitzgerald, Mathew; Rosa, Rubin Jaca; Stahl, H. Philip

    2013-01-01

    The advances in manufacturing techniques for lightweight mirrors, such as EXELSIS deep core low temperature fusion, Corning's continued improvements in the Frit bonding process and the ability to cast large complex designs, combined with water-jet and conventional diamond machining of glasses and ceramics has created the need for more efficient means of generating finite element models of these structures. Traditional methods of assembling 400,000 + element models can take weeks of effort, severely limiting the range of possible optimization variables. This paper will introduce model generation software developed under NASA sponsorship for the design of both terrestrial and space based mirrors. The software deals with any current mirror manufacturing technique, single substrates, multiple arrays of substrates, as well as the ability to merge submodels into a single large model. The modeler generates both mirror and suspension system elements, suspensions can be created either for each individual petal or the whole mirror. A typical model generation of 250,000 nodes and 450,000 elements only takes 5-10 minutes, much of that time being variable input time. The program can create input decks for ANSYS, ABAQUS and NASTRAN. An archive/retrieval system permits creation of complete trade studies, varying cell size, depth, and petal size, suspension geometry with the ability to recall a particular set of parameters and make small or large changes with ease. The input decks created by the modeler are text files which can be modified by any editor, all the key shell thickness parameters are accessible and comments in deck identify which groups of elements are associated with these parameters. This again makes optimization easier. With ANSYS decks, the nodes representing support attachments are grouped into components; in ABAQUS these are SETS and in NASTRAN as GRIDPOINT SETS, this make integration of these models into large telescope or satellite models easier.

  18. Taurus Lightweight Manned Spacecraft Earth orbiting vehicle

    NASA Technical Reports Server (NTRS)

    Bosset, M.

    1991-01-01

    The Taurus Lightweight Manned Spacecraft (LMS) was developed by students of the University of Maryland's Aerospace Engineering course in Space Vehicle Design. That course required students to design an Alternative Manned Spacecraft (AMS) to augment or replace the Space Transportation System and meet the following design requirements: (1) launch on the Taurus Booster being developed by Orbital Sciences Corporation; (2) 99.9 percent assured crew survival rate; (3) technology cutoff date of 1 Jan. 1991; (4) compatibility with current space administration infrastructure; and (5) first flight by May 1995. The Taurus LMS design meets the above requirements and represents an initial step toward larger and more complex spacecraft. The Taurus LMS has a very limited application when compared to the space shuttle, but it demonstrates that the U.S. can have a safe, reliable, and low-cost space system. The Taurus LMS is a short mission duration spacecraft designed to place one man into low Earth orbit (LEO). The driving factor for this design was the low payload carrying capabilities of the Taurus Booster - 1300 kg to a 300-km orbit. The Taurus LMS design is divided into six major design sections. The Human Factors section deals with the problems of life support and spacecraft cooling. The Propulsion section contains the Abort System, the Orbital Maneuvering System (OMS), the Reaction Control System (RCS), and Power Generation. The thermal protection systems and spacecraft structure are contained in the Structures section. The Avionics section includes Navigation, Attitude Determination, Data Processing, Communication systems, and Sensors. The Mission Analysis section was responsible for ground processing and spacecraft astrodynamics. The Systems Integration Section pulled the above sections together into one spacecraft, and addressed costing and reliability.

  19. Taurus Lightweight Manned Spacecraft Earth orbiting vehicle

    NASA Astrophysics Data System (ADS)

    Bosset, M.

    The Taurus Lightweight Manned Spacecraft (LMS) was developed by students of the University of Maryland's Aerospace Engineering course in Space Vehicle Design. That course required students to design an Alternative Manned Spacecraft (AMS) to augment or replace the Space Transportation System and meet the following design requirements: (1) launch on the Taurus Booster being developed by Orbital Sciences Corporation; (2) 99.9 percent assured crew survival rate; (3) technology cutoff date of 1 Jan. 1991; (4) compatibility with current space administration infrastructure; and (5) first flight by May 1995. The Taurus LMS design meets the above requirements and represents an initial step toward larger and more complex spacecraft. The Taurus LMS has a very limited application when compared to the space shuttle, but it demonstrates that the U.S. can have a safe, reliable, and low-cost space system. The Taurus LMS is a short mission duration spacecraft designed to place one man into low Earth orbit (LEO). The driving factor for this design was the low payload carrying capabilities of the Taurus Booster - 1300 kg to a 300-km orbit. The Taurus LMS design is divided into six major design sections. The Human Factors section deals with the problems of life support and spacecraft cooling. The Propulsion section contains the Abort System, the Orbital Maneuvering System (OMS), the Reaction Control System (RCS), and Power Generation. The thermal protection systems and spacecraft structure are contained in the Structures section. The Avionics section includes Navigation, Attitude Determination, Data Processing, Communication systems, and Sensors. The Mission Analysis section was responsible for ground processing and spacecraft astrodynamics. The Systems Integration Section pulled the above sections together into one spacecraft, and addressed costing and reliability.

  20. Taurus lightweight manned spacecraft Earth orbiting vehicle

    NASA Technical Reports Server (NTRS)

    Chase, Kevin A.; Vandersall, Eric J.; Plotkin, Jennifer; Travisano, Jeffrey J.; Loveless, Dennis; Kaczmarek, Michael; White, Anthony G.; Est, Andy; Bulla, Gregory; Henry, Chris

    1991-01-01

    The Taurus Lightweight Manned Spacecraft (LMS) was developed by students of the University of Maryland's Aerospace Engineering course in Space Vehicle Design. That course required students to design an Alternative Manned Spacecraft (AMS) to augment or replace the Space Transportation System and meet the following design requirements: (1) launch on the Taurus Booster being developed by Orbital Sciences Corporation; (2) 99.9 percent assured crew survival rate; (3) technology cutoff data of 1 Jan. 1991; (4) compatibility with current space administration infrastructure; and (5) first flight by May 1995. The Taurus LMS design meets the above requirements and represents an initial step towards larger and more complex spacecraft. The Taurus LMS has a very limited application when compared to the Space Shuttle, but it demonstrates that the U.S. can have a safe, reliable, and low cost space system. The Taurus LMS is a short mission duration spacecraft designed to place one man into low earth orbit (LEO). The driving factor for this design was the low payload carrying capabilities of the Taurus Booster--1300 kg to a 300 km orbit. The Taurus LMS design is divided into six major design sections. The human factors system deals with the problems of life support and spacecraft cooling. The propulsion section contains the abort system, the Orbital Maneuvering System (OMS), the Reaction Control System (RCS), and power generation. The thermal protection systems and spacecraft structure are contained in the structures section. The avionics section includes navigation, attitude determination, data processing, communication systems, and sensors. The mission analysis section was responsible for ground processing and spacecraft astrodynamics. The systems integration section pulled the above sections together into one spacecraft and addressed costing and reliability.

  1. Lightweight composites for modular panelized construction

    NASA Astrophysics Data System (ADS)

    Vaidya, Amol S.

    Rapid advances in construction materials technology have enabled civil engineers to achieve impressive gains in the safety, economy, and functionality of structures built to serve the common needs of society. Modular building systems is a fast-growing modern, form of construction gaining recognition for its increased efficiency and ability to apply modern technology to the needs of the market place. In the modular construction technique, a single structural panel can perform a number of functions such as providing thermal insulation, vibration damping, and structural strength. These multifunctional panels can be prefabricated in a manufacturing facility and then transferred to the construction site. A system that uses prefabricated panels for construction is called a "panelized construction system". This study focuses on the development of pre-cast, lightweight, multifunctional sandwich composite panels to be used for panelized construction. Two thermoplastic composite panels are proposed in this study, namely Composite Structural Insulated Panels (CSIPs) for exterior walls, floors and roofs, and Open Core Sandwich composite for multifunctional interior walls of a structure. Special manufacturing techniques are developed for manufacturing these panels. The structural behavior of these panels is analyzed based on various building design codes. Detailed descriptions of the design, cost analysis, manufacturing, finite element modeling and structural testing of these proposed panels are included in this study in the of form five peer-reviewed journal articles. The structural testing of the proposed panels involved in this study included flexural testing, axial compression testing, and low and high velocity impact testing. Based on the current study, the proposed CSIP wall and floor panels were found satisfactory, based on building design codes ASCE-7-05 and ACI-318-05. Joining techniques are proposed in this study for connecting the precast panels on the construction

  2. Next-Generation Lightweight Mirror Modeling Software

    NASA Technical Reports Server (NTRS)

    Arnold, William R., Sr.; Fitzgerald, Mathew; Rosa, Rubin Jaca; Stahl, Phil

    2013-01-01

    The advances in manufacturing techniques for lightweight mirrors, such as EXELSIS deep core low temperature fusion, Corning's continued improvements in the Frit bonding process and the ability to cast large complex designs, combined with water-jet and conventional diamond machining of glasses and ceramics has created the need for more efficient means of generating finite element models of these structures. Traditional methods of assembling 400,000 + element models can take weeks of effort, severely limiting the range of possible optimization variables. This paper will introduce model generation software developed under NASA sponsorship for the design of both terrestrial and space based mirrors. The software deals with any current mirror manufacturing technique, single substrates, multiple arrays of substrates, as well as the ability to merge submodels into a single large model. The modeler generates both mirror and suspension system elements, suspensions can be created either for each individual petal or the whole mirror. A typical model generation of 250,000 nodes and 450,000 elements only takes 5-10 minutes, much of that time being variable input time. The program can create input decks for ANSYS, ABAQUS and NASTRAN. An archive/retrieval system permits creation of complete trade studies, varying cell size, depth, and petal size, suspension geometry with the ability to recall a particular set of parameters and make small or large changes with ease. The input decks created by the modeler are text files which can be modified by any editor, all the key shell thickness parameters are accessible and comments in deck identify which groups of elements are associated with these parameters. This again makes optimization easier. With ANSYS decks, the nodes representing support attachments are grouped into components; in ABAQUS these are SETS and in NASTRAN as GRIDPOINT SETS, this make integration of these models into large telescope or satellite models possible

  3. Next Generation Lightweight Mirror Modeling Software

    NASA Technical Reports Server (NTRS)

    Arnold, William; Fitzgerald, Matthew; Stahl, Philip

    2013-01-01

    The advances in manufacturing techniques for lightweight mirrors, such as EXELSIS deep core low temperature fusion, Corning's continued improvements in the Frit bonding process and the ability to cast large complex designs, combined with water-jet and conventional diamond machining of glasses and ceramics has created the need for more efficient means of generating finite element models of these structures. Traditional methods of assembling 400,000 + element models can take weeks of effort, severely limiting the range of possible optimization variables. This paper will introduce model generation software developed under NASA sponsorship for the design of both terrestrial and space based mirrors. The software deals with any current mirror manufacturing technique, single substrates, multiple arrays of substrates, as well as the ability to merge submodels into a single large model. The modeler generates both mirror and suspension system elements, suspensions can be created either for each individual petal or the whole mirror. A typical model generation of 250,000 nodes and 450,000 elements only takes 5-10 minutes, much of that time being variable input time. The program can create input decks for ANSYS, ABAQUS and NASTRAN. An archive/retrieval system permits creation of complete trade studies, varying cell size, depth, and petal size, suspension geometry with the ability to recall a particular set of parameters and make small or large changes with ease. The input decks created by the modeler are text files which can be modified by any editor, all the key shell thickness parameters are accessible and comments in deck identify which groups of elements are associated with these parameters. This again makes optimization easier. With ANSYS decks, the nodes representing support attachments are grouped into components; in ABAQUS these are SETS and in NASTRAN as GRIDPOINT SETS, this make integration of these models into large telescope or satellite models possible.

  4. Miniature, Lightweight, One-Time-Opening Valve

    NASA Technical Reports Server (NTRS)

    Jones, Jack; Wu, Juinn Jenq; Leland, Robert

    2008-01-01

    The figure depicts the main parts of a prototype miniature, lightweight, onetime- opening valve. Like some other miniature one-time-opening valves reported in previous issues of NASA Tech Briefs, this valve is opened by melting a material that blocks the flow path. This valve is designed to remain closed at some temperature between room temperature and cryogenic temperature until the time of opening. The prototype valve includes a 1/8-in. (3-mm) aluminum tube, one end of which is plugged with a solder comprising about 37 weight percent of lead and 63 weight percent of tin. The tube and the solder both have a coefficient of thermal expansion of 23 micron/m-K at room temperature. Before plugging, the interior surface of the plug end of the tube is cleaned with a commercial flux paste developed specifically for preparing aluminum for bonding with lead/tin solder. The solder is then melted into the cleaned end of the tube, forming the plug. In a test, the plugged tube was pressurized to 1,000 psi (6.9 MPa) with helium and leak-tested. It was then cooled to a temperature of 77 K (about 196 C) and again leak-tested at the same pressure. Finally, at a lower pressure, the plugged end of the tube was heated to about 200 C (the melting temperature of the solder is 183 C), causing the solder plug to be ejected (see figure). It has been estimated that in a subsequent version of the valve, the plug could be melted by electrical heating, using a nichrome wire having a mass of only 10 g.

  5. Characterization of Polyimide Foams for Ultra-Lightweight Space Structures

    NASA Technical Reports Server (NTRS)

    Meador, Michael (Technical Monitor); Hillman, Keithan; Veazie, David R.

    2003-01-01

    Ultra-lightweight materials have played a significant role in nearly every area of human activity ranging from magnetic tapes and artificial organs to atmospheric balloons and space inflatables. The application range of ultra-lightweight materials in past decades has expanded dramatically due to their unsurpassed efficiency in terms of low weight and high compliance properties. A new generation of ultra-lightweight materials involving advanced polymeric materials, such as TEEK (TM) polyimide foams, is beginning to emerge to produce novel performance from ultra-lightweight systems for space applications. As a result, they require that special conditions be fulfilled to ensure adequate structural performance, shape retention, and thermal stability. It is therefore important and essential to develop methodologies for predicting the complex properties of ultra-lightweight foams. To support NASA programs such as the Reusable Launch Vehicle (RLV), Clark Atlanta University, along with SORDAL, Inc., has initiated projects for commercial process development of polyimide foams for the proposed cryogenic tank integrated structure (see figure 1). Fabrication and characterization of high temperature, advanced aerospace-grade polyimide foams and filled foam sandwich composites for specified lifetimes in NASA space applications, as well as quantifying the lifetime of components, are immensely attractive goals. In order to improve the development, durability, safety, and life cycle performance of ultra-lightweight polymeric foams, test methods for the properties are constant concerns in terms of timeliness, reliability, and cost. A major challenge is to identify the mechanisms of failures (i.e., core failure, interfacial debonding, and crack development) that are reflected in the measured properties. The long-term goal of the this research is to develop the tools and capabilities necessary to successfully engineer ultra-lightweight polymeric foams. The desire is to reduce density

  6. The National Trauma Research Repository: Ushering in a New ERA of trauma research (Commentary).

    PubMed

    Smith, Sharon L; Price, Michelle A; Fabian, Timothy C; Jurkovich, Gregory J; Pruitt, Basil A; Stewart, Ronald M; Jenkins, Donald H

    2016-09-01

    Despite being the leading cause of death in the United States for individuals 46 years and younger and the primary cause of death among military service members, trauma care research has been underfunded for the last 50 years. Sustained federal funding for a coordinated national trauma clinical research program is required to advance the science of caring for the injured. The Department of Defense is committed to funding studies with military relevance; therefore, it cannot fund pediatric or geriatric trauma clinical trials. Currently, trauma clinical trials are often performed within a single site or a small group of trauma hospitals, and research data are not available for secondary analysis or sharing across studies. Data-sharing platforms encourage transfer of research data and knowledge between civilian and military researchers, reduce redundancy, and maximize limited research funding. In collaboration with the Department of Defense, trauma researchers formed the Coalition for National Trauma Research (CNTR) in 2014 to advance trauma research in a coordinated effort. CNTR's member organizations are the American Association for the Surgery of Trauma (AAST), the American College of Surgeons Committee on Trauma (ACS COT), the Eastern Association for the Surgery of Trauma (EAST), the Western Trauma Association (WTA), and the National Trauma Institute (NTI). CNTR advocates for sustained federal funding for a multidisciplinary national trauma research program to be conducted through a large clinical trials network and a national trauma research repository. The initial advocacy and research activities underway to accomplish these goals are presented. PMID:27496599

  7. Lightweight, direct-radiating nickel hydrogen batteries

    NASA Technical Reports Server (NTRS)

    Metcalfe, J. R.

    1986-01-01

    Two battery module configurations were developed which, in addition to integrating cylindrical nickel hydrogen (NiH2) cells into batteries, provide advances in the means of mounting, monitoring and thermal control of these cells. The main difference between the two modules is the physical arrangement of the cells: vertical versus horizontal. Direct thermal radiation to deep space is accomplished by substituting the battery structure for an exterior spacecraft panel. Unlike most conventional nickel-cadmium (NiCd) and NiH2 batteries, the cells are not tightly packed together; therefore ancillary heat conducting media to outside radiating areas, and spacecraft deck reinforcements for high mass concentration are not necessary. Testing included electrical characterization and a comprehensive regime of environmental exposures. The designs are flexible with respect to quantity and type of cells, orbit altitude and period, power demand profile, and the extent of cell parameter monitoring. This paper compares the characteristics of the two battery modules and summarizes their performance.

  8. Nonpathologizing trauma interventions in abnormal psychology courses.

    PubMed

    Hoover, Stephanie M; Luchner, Andrew F; Pickett, Rachel F

    2016-01-01

    Because abnormal psychology courses presuppose a focus on pathological human functioning, nonpathologizing interventions within these classes are particularly powerful and can reach survivors, bystanders, and perpetrators. Interventions are needed to improve the social response to trauma on college campuses. By applying psychodynamic and feminist multicultural theory, instructors can deliver nonpathologizing interventions about trauma and trauma response within these classes. We recommend class-based interventions with the following aims: (a) intentionally using nonpathologizing language, (b) normalizing trauma responses, (c) subjectively defining trauma, (d) challenging secondary victimization, and (e) questioning the delineation of abnormal and normal. The recommendations promote implications for instructor self-reflection, therapy interventions, and future research. PMID:26460794

  9. The biology of trauma: implications for treatment.

    PubMed

    Solomon, Eldra P; Heide, Kathleen M

    2005-01-01

    During the past 20 years, the development of brain imaging techniques and new biochemical approaches has led to increased understanding of the biological effects of psychological trauma. New hypotheses have been generated about brain development and the roots of antisocial behavior. We now understand that psychological trauma disrupts homeostasis and can cause both short and long-term effects on many organs and systems of the body. Our expanding knowledge of the effects of trauma on the body has inspired new approaches to treating trauma survivors. Biologically informed therapy addresses the physiological effects of trauma, as well as cognitive distortions and maladaptive behaviors. The authors suggest that the most effective therapeutic innovation during the past 20 years for treating trauma survivors has been Eye Movement Desensitization and Reprocessing (EMDR), a therapeutic approach that focuses on resolving trauma using a combination of top-down (cognitive) and bottom-up (affect/body) processing. PMID:15618561

  10. Oxidative stress in severe pulmonary trauma in critical ill patients. Antioxidant therapy in patients with multiple trauma--a review.

    PubMed

    Bedreag, Ovidiu Horea; Rogobete, Alexandru Florin; Sarandan, Mirela; Cradigati, Alina Carmen; Papurica, Marius; Dumbuleu, Maria Corina; Chira, Alexandru Mihai; Rosu, Oana Maria; Sandesc, Dorel

    2015-01-01

    Multiple trauma patients require extremely good management and thus, the trauma team needs to be prepared and to be up to date with the new standards of intensive therapy. Oxidative stress and free radicals represent an extremely aggressive factor to cells, having a direct consequence upon the severity of lung inflammation. Pulmonary tissue is damaged by oxidative stress, leading to biosynthesis of mediators that exacerbate inflammation modulators. The subsequent inflammation spreads throughout the body, leading most of the time to multiple organ dysfunction and death. In this paper, we briefly present an update of biochemical effects of oxidative stress and free radical damage to the pulmonary tissue in patients in critical condition in the intensive care unit. Also, we would like to present a series of active substances that substantially reduce the aggressiveness of free radicals, increasing the chances of survival. PMID:26037258

  11. Utilization of Lightweight Materials Made from Coal Gasificaiton Slags

    SciTech Connect

    Choudhry, V.; Hadley, S.

    1996-12-31

    The integrated gasification combined-cycle (IGCC) coal conversion process has been demonstrated to be a clean, efficient, and environmentally acceptable method of generating power; however, it generates solid waste materials in relatively large quantities. For example, a 400-MW power plant using 4000 tons of 10% ash coal per day may generate over 440 tons/day of solid waste of slag, consisting of vitrified mineral matter and unburned carbon. The disposal of the wastes represents significant costs. Regulatory trends with respect to solid wastes disposal, landfill development costs and public concern make utilization of solid wastes a high-priority issue. As coal gasification technologies find increasing commercial applications for power generation or production of chemical feed stocks, it becomes imperative that slag utilization methods be developed, tested and commercialized in order to offset disposal costs. Praxis is working on a DOE/METC funded project to demonstrate the technical and economic feasibility of making lightweight and ultra-lightweight aggregates from slags left as solid by-products from the coal gasification process. The project objectives are to develop and demonstrate the technology for producing slag-based lightweight aggregates (SLA), to produce 10 tons of SLA products with different unit weights from two slags, to collect operational and emissions data from pilot-scale operations, and to conduct laboratory and commercial scale evaluations of SLA with conventional lightweight and ultra-lightweight aggregates.

  12. Trauma care systems in Spain.

    PubMed

    Queipo de Llano, E; Mantero Ruiz, A; Sanchez Vicioso, P; Bosca Crespo, A; Carpintero Avellaneda, J L; de la Torre Prado, M V

    2003-09-01

    Trauma care systems in Spain are provided by the Nacional Health Service in a decentralized way by the seventeen autonomous communities whose process of decentralization was completed in January 2002. Its organisation is similar in all of them. Public sector companies of sanitary emergencies look after the health of citizens in relation to medical and trauma emergencies with a wide range of up to date resources both technical and human. In the following piece there is a description of the emergency response teams divided into ground and air that are responsible for the on site care of the patients in coordination with other public services. They also elaborate the prehospital clinical history that is going to be a valuable piece of information for the teams that receive the patient in the Emergency Hospital Unit (EHU). From 1980 to 1996 the mortality rate per 10.000 vehicles and the deaths per 1.000 accidents dropped significantly: in 1980 6.4 and 96.19% and in 1996, 2.8 and 64.06% respectively. In the intrahospital organisation there are two differentiated areas to receive trauma patients the casualty department and the EHU. In the EHU the severe and multiple injured patients are treated by the emergency hospital doctors; first in the triage or resuscitation areas and after when stabilised they are passed too the observation area or to the Intensive Care Unit (ICU) and from there the EHU or ICU doctors call the appropriate specialists. There is a close collaboration and coordination between the orthopaedic surgeon the EHU doctors and the other specialists surgeons in order to comply with treatment prioritization protocols. Once the patient has been transferred an entire process of assistance continuity is developed based on interdisciplinary teams formed in the hospital from the services areas involved in trauma assistance and usually coordinated by the ICU doctors. There is also mentioned the assistance registry of trauma patients, the ICU professional training

  13. Musculoskeletal trauma: the baseball bat.

    PubMed Central

    Bryant, D. D.; Greenfield, R.; Martin, E.

    1992-01-01

    Between July 1987 and December 1990 in Washington, DC, 116 patients sustained 146 fractures and seven dislocations due to an assault with a baseball bat. The ulna was the most common site of trauma (61 fractures), followed by the hand (27 injuries) and the radius (14 injuries). Forty-two of the 146 fractures were significantly displaced and required open reduction and internal fixation to restore satisfactory alignment. Twenty-nine of the 146 fractures were open fractures. Treatment protocol for open fractures consisted of irrigation and debridement, antibiotic therapy, and bone stabilization with either internal or external fixation, or casting. Recognition of the severity of the soft tissue and bone damage is important in the management of musculoskeletal trauma secondary to the baseball bat. Images Figure 1 Figure 2 Figure 3 PMID:1460683

  14. Computer-assisted trauma surgery.

    PubMed

    Atesok, Kivanc; Schemitsch, Emil H

    2010-05-01

    Computer-assisted orthopaedic surgery (CAOS) is performed by digitizing the patient's anatomy, combining the images in a computerized system, and integrating the surgical instruments into the digitized image background. This allows the surgeon to navigate the surgical instruments and the bone in an improved, virtual visual environment. CAOS in traumatology is performed with images obtained by fluoroscopy, CT, or three-dimensional fluoroscopy. CAOS is used in basic trauma procedures for preoperative planning, fracture reduction, intramedullary nailing, percutaneous screw or plate fixation, and hardware or shrapnel removal. Potential benefits of CAOS include minimal invasiveness, increased accuracy, and decreased radiation exposure. Limitations include a significant learning curve, increased surgical time, requirements for special setup and equipment handling in the operating room, specialized technical support, and cost. Current evidence shows no advantage with CAOS in trauma cases compared with conventional methods. Prospective randomized trials and clinical outcomes are lacking. PMID:20435875

  15. Hypotensive Resuscitation among Trauma Patients

    PubMed Central

    Carrick, Matthew M.; Leonard, Jan; Slone, Denetta S.; Mains, Charles W.

    2016-01-01

    Hemorrhagic shock is a principal cause of death among trauma patients within the first 24 hours after injury. Optimal fluid resuscitation strategies have been examined for nearly a century, more recently with several randomized controlled trials. Hypotensive resuscitation, also called permissive hypotension, is a resuscitation strategy that uses limited fluids and blood products during the early stages of treatment for hemorrhagic shock. A lower-than-normal blood pressure is maintained until operative control of the bleeding can occur. The randomized controlled trials examining restricted fluid resuscitation have demonstrated that aggressive fluid resuscitation in the prehospital and hospital setting leads to more complications than hypotensive resuscitation, with disparate findings on the survival benefit. Since the populations studied in each randomized controlled trial are slightly different, as is the timing of intervention and targeted vitals, there is still a need for a large, multicenter trial that can examine the benefit of hypotensive resuscitation in both blunt and penetrating trauma patients. PMID:27595109

  16. Planned reoperation for severe trauma.

    PubMed Central

    Hirshberg, A; Mattox, K L

    1995-01-01

    OBJECTIVE: The authors review the physiologic basis, indications, techniques, and results of the planned reoperation approach to severe trauma. SUMMARY BACKGROUND DATA: Multivisceral trauma and exsanguinating hemorrhage lead to hypothermia, coagulopathy, and acidosis. Formal resections and reconstructions in these unstable patients often result in irreversible physiologic insult. A new surgical strategy addresses these physiologic concerns by staged control and repair of the injuries. METHOD: The authors review the literature. RESULTS: Indications for planned reoperation include avoidance of irreversible physiologic insult and inability to obtain direct hemostasis or formal abdominal closure. The three phases of the strategy include initial control, stabilization, and delayed reconstruction. Various techniques are used to obtain rapid temporary control of bleeding and hollow visceral spillage. Hypothermia, coagulopathy, and the abdominal compartment syndrome are major postoperative concerns. Definitive repair of the injuries is undertaken after stabilization. CONCLUSION: Planned reoperation offers a simple and effective alternative to the traditional surgical management of complex or multiple injuries in critically wounded patients. PMID:7618965

  17. Computed tomography of splenic trauma

    SciTech Connect

    Jeffrey, R.B.; Laing, F.C.; Federle, M.P.; Goodman, P.C.

    1981-12-01

    Fifty patients with abdominal trauma and possible splenic injury were evaluated by computed tomography (CT). CT correctly diagnosed 21 of 22 surgically proved traumatic sesions of the spleen (96%). Twenty-seven patients had no evidence of splenic injury. This was confirmed at operation in 1 patient and clinical follow-up in 26. There were one false negative and one false positive. In 5 patients (10%), CT demonstrated other clinically significant lesions, including hepatic or renal lacerations in 3 and large retroperitoneal hematomas in 2. In adolescents and adults, CT is an accurate, noninvasive method of rapidly diagnosing splenic trauma and associated injuries. Further experience is needed to assess its usefulness in evaluating splenic injuries in infants and small children.

  18. Musculoskeletal trauma service in Thailand.

    PubMed

    Mahaisavariya, Banchong

    2008-10-01

    Trauma is becoming a leading cause of death in most of the low-income and middle-income countries worldwide. The growing number of motor vehicles far surpasses the development and upkeep of the road and highway networks, traffic laws, and driver training and licensing. In Thailand, road traffic injuries have become the second leading cause of death and morbidity overall since 1990. The lack of improvement to existing roadways, implementation of traffic safety and ridership laws including seatbelt regulations, and poor emergency medical assistance support systems all contribute to these statistics. An insufficient number and inequitable distribution of healthcare professionals is also a national problem, especially at the district level. Prehospital care of trauma patients remains insufficient and improvements at the national level are suggested. PMID:18629597

  19. Conservative treatment of liver trauma.

    PubMed

    Andersson, R; Bengmark, S

    1990-01-01

    A marked change toward a more conservative approach in the treatment of abdominal trauma has been noted, especially during the last decade. This change in regimen was first seen in the handling of splenic trauma, initiated by pediatric surgeons. Later, the concept of conservative management was also introduced among adults and it is now widely accepted. Here, an almost mandatory splenectomy has been replaced by attempts at various forms of splenic salvage. The development followed an initial report by King and Shumacker in 1952 on an increased susceptibility to overwhelming sepsis in splenectomized children, findings which later also were demonstrated among adults. It has also been shown that the bleeding from intraparenchymal lesions with an intact splenic capsule or minor capsular tears frequently ceases spontaneously, hereby making nonoperative management possible in selective cases. PMID:2200210

  20. Hypotensive Resuscitation among Trauma Patients.

    PubMed

    Carrick, Matthew M; Leonard, Jan; Slone, Denetta S; Mains, Charles W; Bar-Or, David

    2016-01-01

    Hemorrhagic shock is a principal cause of death among trauma patients within the first 24 hours after injury. Optimal fluid resuscitation strategies have been examined for nearly a century, more recently with several randomized controlled trials. Hypotensive resuscitation, also called permissive hypotension, is a resuscitation strategy that uses limited fluids and blood products during the early stages of treatment for hemorrhagic shock. A lower-than-normal blood pressure is maintained until operative control of the bleeding can occur. The randomized controlled trials examining restricted fluid resuscitation have demonstrated that aggressive fluid resuscitation in the prehospital and hospital setting leads to more complications than hypotensive resuscitation, with disparate findings on the survival benefit. Since the populations studied in each randomized controlled trial are slightly different, as is the timing of intervention and targeted vitals, there is still a need for a large, multicenter trial that can examine the benefit of hypotensive resuscitation in both blunt and penetrating trauma patients. PMID:27595109

  1. [New observations on gut trauma].

    PubMed

    Staib, L; Henne-Bruns, D

    2005-10-01

    Abdominal trauma from blunt objects remains a challenge in clinical practice. The primary aims are quick recognition and reversal of life-threatening situations, rational use of the available diagnostic methods, and avoidance of unnecessary laparotomy. The majority of these injuries can now be treated conservatively, whereby interventional methods such as drainage inserts and embolisation are becoming increasingly favoured. Observation of the treatment course by an experienced surgeon is a must. In patients with complicated injuries, special attention must be paid to so-called missed injuries: traumata that may be overlooked such as small intestine and diaphragm ruptures. Aside from retaining organs and their function, the most important concern is damage control (for complex injuries) and laparotomy in the abdominal compartment, with the application of temporary laparotomy as needed. These methods are aimed at reducing mortality pre- and post-admittance. However, we still lack valid prognostic parameters to allow realistic estimation of survival following severe, blunt abdominal trauma. PMID:15843910

  2. Pearls of Mandibular Trauma Management

    PubMed Central

    Koshy, John C.; Feldman, Evan M.; Chike-Obi, Chuma J.; Bullocks, Jamal M.

    2010-01-01

    Mandibular trauma is a common problem seen by plastic surgeons. When fractures occur, they have the ability to affect the patient's occlusion significantly, cause infection, and lead to considerable pain. Interventions to prevent these sequelae require either closed or open forms of reduction and fixation. Physicians determining how to manage these injuries should take into consideration the nature of the injury, background information regarding the patient's health, and the patient's comorbidities. Whereas general principles guide the management of the majority of injuries, special consideration must be paid to the edentulous patient, complex and comminuted fractures, and pediatric patients. These topics are discussed in this article, with a special emphasis on pearls of mandibular trauma management. PMID:22550460

  3. Cryogenic Performance of a Lightweight Silicon Carbide Mirror

    NASA Technical Reports Server (NTRS)

    Eng, Ron; Carpenter, James; Haight, Harlan; Hogue, William; Kegley, Jeff; Stahl, H. Philip; Wright, Ernie; Kane, Dave; Hadaway, James

    2005-01-01

    Low cost, high performance lightweight Silicon Carbide (SiC) mirrors provide an alternative to Beryllium mirrors. A Trex Enterprises 0.25m diameter lightweight SiC mirror using its patented Chemical Vapor Composites (CVC) technology was evaluated for its optical performance. CVC SiC is chemically pure, thermally stable, and mechanically stiff. CVC technology yields higher growth rate than that of CVD SiC. NASA has funded lightweight optical materials technology development efforts involving SiC mirrors for future space based telescope programs. As part of these efforts, a Trex SiC was measured interferometrically from room temperature to 30 degrees Kelvin. This paper will discuss the test goals, the test instrumentation, test results, and lessons learned.

  4. Dynamic deformation analysis of light-weight mirror

    NASA Astrophysics Data System (ADS)

    Zhang, Yingtao; Cao, Xuedong; Kuang, Long; Yang, Wei

    2012-10-01

    In the process of optical dynamic target work, under the effort of the arm of dynamic target, the mirror needs to do circular motion, additional accelerated motion and uniform motion. The maximum acceleration is 10°/s2 and the maximum velocity is 30°/s. In this paper, we mostly analyze the dynamic deformation of a 600 mm honeycomb light-weight mirror of a certain dynamic target. Using the FEA (finite element analysis) method, first of all, we analyze the deformation of the light-weight mirror induced in gravity at different position; later, the dynamic deformation of light-weight mirror is analyzed in detailed. The analysis results indicate that, when the maximum acceleration is 10°/s2 and the maximum velocity is 30°/s, the centripetal force is 5% of the gravity at the equal mass, and the dynamic deformation of the mirror is 6.1% of the deformation induced by gravity.

  5. The Development of Lightweight Electronics Enclosures for Space Applications

    NASA Technical Reports Server (NTRS)

    Fenske, Matthew T.; Barth, Jane L.; Didion, Jeffrey R.; Mule, Peter

    1999-01-01

    This paper outlines the end to end effort to produce lightweight electronics enclosures for NASA GSFC electronics applications with the end goal of presenting an array of lightweight box options for a flight opportunity. Topics including the development of requirements, design of three different boxes, utilization of advanced materials and processes, and analysis and test will be discussed. Three different boxes were developed independently and in parallel. A lightweight machined Aluminum box, a cast Aluminum box and a composite box were designed, fabricated, and tested both mechanically and thermally. There were many challenges encountered in meeting the requirements with a non-metallic enclosure and the development of the composite box employed several innovative techniques.

  6. Changing approach to psychological trauma.

    PubMed

    2016-07-01

    As the Battle of the Somme's anniversary looms and post-traumatic stress disorder continues to be an enduring issue for the armed forces, what lessons in treating mental illness can we learn from the first world war? Claire Chatterton, writing in Mental Health Practice, examines the changes to treating psychological trauma during the Somme by health professionals who had rarely worked with people experiencing mental health problems. PMID:27380708

  7. Current Epidemiology of Genitourinary Trauma

    PubMed Central

    McGeady, James B.; Breyer, Benjamin N.

    2013-01-01

    Synopsis This article reviews recent publications evaluating the current epidemiology of urologic trauma. It begins by providing a brief explanation of databases that have been recently used to study this patient population, then proceeds to discuss each genitourinary organ individually, discussing the most relevant and up to date information published for each one. The conclusion of the article briefly discusses possible future research and development areas pertaining to the topic. PMID:23905930

  8. Contemporary Management of Renal Trauma

    PubMed Central

    Shoobridge, Jennifer J; Corcoran, Niall M; Martin, Katherine A; Koukounaras, Jim; Royce, Peter L; Bultitude, Matthew F

    2011-01-01

    In the management of renal trauma, surgical exploration inevitably leads to nephrectomy in all but a few specialized centers. With current management options, the majority of hemodynamically stable patients with renal injuries can be successfully managed nonoperatively. Improved radiographic techniques and the development of a validated renal injury scoring system have led to improved staging of injury severity that is relatively easy to monitor. This article reviews a multidisciplinary approach to facilitate the care of patients with renal injury. PMID:21941463

  9. Trauma systems, shock, and resuscitation.

    PubMed

    Fallon, W F

    1993-01-01

    This review of early care covers issues pertaining to the analysis of system function, prehospital intravascular volume replacement, diagnosis of proximity vascular injury, the role of emergency thoracotomy, and the value of transesophageal echocardiography. The first six articles deal with various aspects of system function, from triage to analysis of outcome. The next series of articles reviews work in progress evaluating optimal fluid for resuscitation. Hypertonic saline and dextran combinations have been shown to restore vital signs better than isotonic solutions; they are safe, require smaller volumes, and may improve head injury outcome. Danger lies in the restoration of perfusion without hemorrhage control. Two articles on emergency thoracotomy review the indications and outcome in blunt and penetrating trauma. Survival in blunt trauma is virtually zero. An article and two editorials summarize state of the art for diagnosis and treatment of proximity vascular injury. Two articles describe the potential use of the new technique of transesophageal echocardiography. This new modality has not formed a solid indication at present and can be considered investigational in trauma care. PMID:7584006

  10. Radionuclide evaluation of lung trauma.

    PubMed

    Lull, R J; Tatum, J L; Sugerman, H J; Hartshorne, M F; Boll, D A; Kaplan, K A

    1983-07-01

    Nuclear medicine imaging procedures can play a significant role in evaluating the pulmonary complications that are seen in trauma patients. A quantitative method for measuring increased pulmonary capillary permeability that uses Tc-99m HSA allows early diagnosis of acute respiratory distress syndrome (ARDS) and accurately differentiates this condition from pneumonia or cardiogenic pulmonary edema. This technique may be of great value in following the response to therapy. The use of 133Xe to diagnose inhalation injury remains an important diagnostic tool, particularly at hospitals with specialized burn units. Regional decreases in ventilation-perfusion images reliably localize aspirated foreign bodies. Radionuclide techniques that are used to demonstrate gastropulmonary aspiration remain controversial and require further clinical evaluation. Pulmonary perfusion imaging, although nonspecific, may provide the earliest clue for correct diagnosis of fat embolism, air embolism, contusion, or laceration. Furthermore, the possibility of perfusion abnormality due to these uncommon conditions must be remembered whenever trauma patients are evaluated for pulmonary thromboembolism with scintigraphy. Occasionally, liver or spleen scintigraphy may be the most appropriate procedure when penetrating chest trauma also involves these subdiaphragmatic organs. PMID:6226097

  11. Joseph Beuys: trauma and catharsis.

    PubMed

    Ottomann, C; Stollwerck, P L; Maier, H; Gatty, I; Muehlberger, T

    2010-12-01

    Joseph Beuys was one of the most significant artists of the 20th century. He was a gunner and radio operator in the German Air Force during World War II, and was severely injured several times. In March 1943 he had a life-changing experience after the dive bomber he was assigned to crashed in the Crimean peninsula. This trauma influenced Beuys' entire artistic career, and is known in art history as the 'Tartar Legend' or 'Tartar Myth'. Profoundly affected by the crash, the severe trauma, the near-death experience and his rescue, which he perceived as a "rebirth", Beuys no longer saw himself, other people or society as a whole in the same way as previously. With his new consciousness, he ignored boundaries and created visions whereby all mankind could experience the healing he had undergone. Beuys did not bring society far enough for the turning point towards "the healing of the world" to be visible, yet today it is important to keep his work alive as a record of his extraordinary strength, which arose from trauma and severe injury, and was carried by a passionate commitment to mankind and to life itself. PMID:21393290

  12. Reflective Coating for Lightweight X-Ray Optics

    NASA Technical Reports Server (NTRS)

    Chan, Kai-Wing; Zhang, William W.; Windt, David; Hong, Mao-Ling; Saha, Timo; McClelland, Ryan; Sharpe, Marton; Dwivedi, Vivek H.

    2012-01-01

    X-ray reflective coating for next generation's lightweight, high resolution, optics for astronomy requires thin-film deposition that is precisely fine-tuned so that it will not distort the thin sub-mm substrates. Film of very low stress is required. Alternatively, mirror distortion can be cancelled by precisely balancing the deformation from multiple films. We will present results on metallic film deposition for the lightweight optics under development. These efforts include: low-stress deposition by magnetron sputtering and atomic layer deposition of the metals, balancing of gross deformation with two-layer depositions of opposite stresses and with depositions on both sides of the thin mirrors.

  13. Progress in the development of lightweight nickel electrode

    NASA Technical Reports Server (NTRS)

    Britton, Doris L.

    1992-01-01

    The use of the lightweight nickel electrode, in place of the heavy-sintered state-of-the-art nickel electrode, will lead to improvements in specific energy and performance of the nickel-hydrogen cell. Preliminary testing indicates that a nickel fiber mat is a promising support candidate for the nickel hydroxide active material. Nickel electrodes made from fiber mats, with nickel and cobalt powder added to the fiber, were tested at LeRC. To date, over 8000 cycles have been accumulated, at 40 percent depth-of-discharge, using the lightweight fiber electrode, in a boiler plate nickel-hydrogen cell.

  14. Overview of Lightweight Structures for Rotorcraft Engines and Drivetrains

    NASA Technical Reports Server (NTRS)

    Roberts, Gary D.

    2011-01-01

    This is an overview presentation of research being performed in the Advanced Materials Task within the NASA Subsonic Rotary Wing Project. This research is focused on technology areas that address both national goals and project goals for advanced rotorcraft. Specific technology areas discussed are: (1) high temperature materials for advanced turbines in turboshaft engines; (2) polymer matrix composites for lightweight drive system components; (3) lightweight structure approaches for noise and vibration control; and (4) an advanced metal alloy for lighter weight bearings and more reliable mechanical components. An overview of the technology in each area is discussed, and recent accomplishments are presented.

  15. The Role of Cumulative Trauma, Betrayal, and Appraisals in Understanding Trauma Symptomatology.

    PubMed

    Martin, Christina Gamache; Cromer, Lisa Demarni; Deprince, Anne P; Freyd, Jennifer J

    2013-03-01

    Poor psychological outcomes are common among trauma survivors, yet not all survivors experience adverse sequelae. The current study examined links between cumulative trauma exposure as a function of the level of betrayal (measured by the relational closeness of the survivor and the perpetrator), trauma appraisals, gender, and trauma symptoms. Participants were 273 college students who reported experiencing at least one traumatic event on a trauma checklist. Three cumulative indices were constructed to assess the number of different types of traumas experienced that were low (LBTs), moderate (MBTs), or high in betrayal (HBTs). Greater trauma exposure was related to more symptoms of depression, dissociation, and PTSD, with exposure to HBTs contributing the most. Women were more likely to experience HBTs than men, but there were no gender differences in trauma-related symptoms. Appraisals of trauma were predictive of trauma-related symptoms over and above the effects explained by cumulative trauma at each level of betrayal. The survivor's relationship with the perpetrator, the effect of cumulative trauma, and their combined impact on trauma symptomatology are discussed. PMID:23542882

  16. Strength properties of cement slurries with lightweights applied in oil and gas wells

    NASA Astrophysics Data System (ADS)

    Bubnov, A. S.; Boyko, I. A.; Khorev, V. S.

    2015-02-01

    The article is focused on the cement stone strength properties resulted from lightweight cement slurries that meet GOST-1581-96 (state Standards) requirements. Exfoliated vermiculite, hollow aluminosilicate microspheres (HAMs), diatomite and perlite were used as lightweighting additives.

  17. Lightweight Magnetic Cooler With a Reversible Circulator

    NASA Technical Reports Server (NTRS)

    Chen, Weibo; McCormick, John

    2011-01-01

    A design of a highly efficient and lightweight space magnetic cooler has been developed that can continuously provide remote/distributed cooling at temperatures in the range of 2 K with a heat sink at about 15 K. The innovative design uses a cryogenic circulator that enables the cooler to operate at a high cycle frequency to achieve a large cooling capacity. The ability to provide remote/distributed cooling not only allows flexible integration with a payload and spacecraft, but also reduces the mass of the magnetic shields needed. The active magnetic regenerative refrigerator (AMRR) system is shown in the figure. This design mainly consists of two identical magnetic regenerators surrounded by their superconducting magnets and a reversible circulator. Each regenerator also has a heat exchanger at its warm end to reject the magnetization heat to the heat sink, and the two regenerators share a cold-end heat exchanger to absorb heat from a cooling target. The circulator controls the flow direction, which cycles in concert with the magnetic fields, to facilitate heat transfer. Helium enters the hot end of the demagnetized column, is cooled by the refrigerant, and passes into the cold-end heat exchanger to absorb heat. The helium then enters the cold end of the magnetized column, absorbing heat from the refrigerant, and enters the hot-end heat exchanger to reject the magnetization heat. The efficient heat transfer in the AMRR allows the system to operate at a relatively short cycle period to achieve a large cooling power. The key mechanical components in the magnetic cooler are the reversible circulator and the magnetic regenerators. The circulator uses non-contacting, self-acting gas bearings and clearance seals to achieve long life and vibration- free operation. There are no valves or mechanical wear in this circulator, so the reliability is predicted to be very high. The magnetic regenerator employs a structured bed configuration. The core consists of a stack of thin

  18. Ultra lightweight PMMA-based composite plates with robust super-hydrophobic surfaces.

    PubMed

    Pareo, Paola; De Gregorio, Gian Luca; Manca, Michele; Pianesi, Maria Savina; De Marco, Luisa; Cavallaro, Francesco; Mari, Margherita; Pappadà, Silvio; Ciccarella, Giuseppe; Gigli, Giuseppe

    2011-11-15

    Extremely lightweight plates made of an engineered PMMA-based composite material loaded with hollow glass micro-sized spheres, nano-sized silica particles and aluminum hydroxide prismatic micro-flakes were realized by cast molding. Their interesting bulk mechanical properties were combined to properly tailored surface topography compatible with the achievement of a superhydrophobic behavior after the deposition of a specifically designed hydrophobic coating. With this aim, we synthesized two different species of fluoromethacrylic polymers functionalized with methoxysilane anchoring groups to be covalently grafted onto the surface protruding inorganic fillers. By modulating the feed composition of the reacting monomers, it was possible to combine the hydrophobic character of the polymer with an high adhesion strength to the substrate and hence to maximize both the water contact angle (up to 157°) and the durability of the easy-to-clean effect (up to 2000 h long outdoor exposure). PMID:21855889

  19. Chemical Vapor Deposition for Ultra-lightweight Thin-film Solar Arrays for Space

    NASA Technical Reports Server (NTRS)

    Hepp, Aloysius F.; Raffaelle, Ryne P.; Banger, Kulbinder K.; Jin, Michael H.; Lau, Janice E.; Harris, Jerry D.; Cowen, Jonathan E.; Duraj, Stan A.

    2002-01-01

    The development of thin-film solar cells on flexible, lightweight, space-qualified substrates provides an attractive cost solution to fabricating solar arrays with high specific power, (W/kg). The use of a polycrystalline chalcopyrite absorber layer for thin film solar cells is considered as the next generation photovoltaic devices. A key technical issues outlined in the 2001 U.S. Photovoltaic Roadmap, is the need to develop low cost, high throughput manufacturing for high-efficiency thin film solar cells. At NASA GRC we have focused on the development of new single-source-precursors (SSPs) and their utility to deposit the chalcopyrite semi-conducting layer (CIS) onto flexible substrates for solar cell fabrication. The syntheses and thermal modulation of SSPs via molecular engineering is described. Thin-film fabrication studies demonstrate the SSPs can be used in a spray CVD process, for depositing CIS at reduced temperatures, which display good electrical properties, suitable for PV devices.

  20. A lightweight low-frequency sound insulation membrane-type acoustic metamaterial

    NASA Astrophysics Data System (ADS)

    Lu, Kuan; Wu, Jiu Hui; Guan, Dong; Gao, Nansha; Jing, Li

    2016-02-01

    A novel membrane-type acoustic metamaterial with a high sound transmission loss (STL) at low frequencies (⩽500Hz) was designed and the mechanisms were investigated by using negative mass density theory. This metamaterial's structure is like a sandwich with a thin (thickness=0.25mm) lightweight flexible rubber material within two layers of honeycomb cell plates. Negative mass density was demonstrated at frequencies below the first natural frequency, which results in the excellent low-frequency sound insulation. The effects of different structural parameters of the membrane on the sound-proofed performance at low frequencies were investigated by using finite element method (FEM). The numerical results show that, the STL can be modulated to higher value by changing the structural parameters, such as the membrane surface density, the unite cell film shape, and the membrane tension. The acoustic metamaterial proposed in this study could provide a potential application in the low-frequency noise insulation.

  1. Thyroid crisis in the maxillofacial trauma patient.

    PubMed

    Weinstock, Robert J; Lewis, Tashorn; Miller, Jared; Clarkson, Earl I

    2014-11-01

    Thyroid crisis, also known as thyroid storm, is a rare complication of thyrotoxicosis that results in a hypermetabolic and hyperadrenergic state. This condition requires prompt recognition and treatment because the mortality from thyroid crisis approaches 30%. Thyrotoxicosis alone will usually not progress to thyroid crisis. Thyroid crisis will typically be precipitated by some concomitant event such as infection, iodine-containing contrast agents, medications such as amiodarone, pregnancy, or surgery. Trauma is a rare precipitator of thyroid crisis. Several published studies have reported thyroid crisis resulting from blunt or penetrating neck trauma. Significant systemic trauma, such as motor vehicle accidents, has also been reported to precipitate thyroid crisis. It is very unusual for minor trauma to precipitate thyroid crisis. In the present study, we report the case of a patient who had incurred relatively minor maxillofacial trauma and developed thyroid crisis 2 weeks after the initial trauma. PMID:25085805

  2. Assessing sexual trauma histories in homeless women.

    PubMed

    Weinrich, Sally; Hardin, Sally; Glaser, Dale; Barger, Mary; Bormann, Jill; Lizarraga, Cabiria; Terry, Micheal; Criscenzo, Jeeni; Allard, Carolyn B

    2016-01-01

    Almost 1 out of every 3 homeless women (32%) in the United States, United Kingdom, and Australia has experienced childhood sexual trauma. We assessed lifetime sexual trauma histories among 29 homeless women from three Southern California community sites: one residential safe house and two safe parking areas. More than half of the women (54%) reported a history of sexual trauma. That rate was higher (86%) among women living at the safe home than among women staying at the safe parking sites (only 42%). All four of the women who had served in the military reported having experienced military sexual trauma. The high percentages of sexual trauma found in homeless women highlight the need for effective interventions for sexual trauma. PMID:26583457

  3. Primary and secondary skeletal blast trauma.

    PubMed

    Christensen, Angi M; Smith, Victoria A; Ramos, Vanessa; Shegogue, Candie; Whitworth, Mark

    2012-01-01

    This study examines primary (resulting from blast wave) and secondary (resulting from disintegrated, penetrating fragments) blast trauma to the skeleton. Eleven pigs were exposed to semi-controlled blast events of varying explosive type, charge size, and distance, including some cases with shrapnel. Skeletal trauma was found to be extensive, presenting as complex, comminuted fractures with numerous small, displaced bone splinters and fragments. Traumatic amputation of the limbs and cranium was also observed. Fractures were concentrated in areas nearer the blast, but there was generally no identifiable point of impact. Fractures were more random in appearance and widespread than those typically associated with gunshot or blunt force injury events. These patterns appear to be uniquely associated with blast trauma and may therefore assist forensic anthropologists and other forensic examiners in the interpretation of skeletal trauma by enabling them to differentiate between blast trauma and trauma resulting from some other cause. PMID:21981586

  4. Prehospital advanced trauma life support for critical blunt trauma victims.

    PubMed

    Cwinn, A A; Pons, P T; Moore, E E; Marx, J A; Honigman, B; Dinerman, N

    1987-04-01

    The ability of paramedics to deliver advanced trauma life support (ATLS) in an expedient fashion for victims of trauma has been strongly challenged. In this study, the records of 114 consecutive victims of blunt trauma who underwent laparotomy or thoracotomy were reviewed. Prehospital care was rendered by paramedics operating under strict protocols. The mean response time (minutes +/- SEM) to the scene was 5.6 +/- 0.27. On-scene time was 13.9 +/- 0.62. The time to return to the hospital was 8.0 +/- 0.4. On-scene time included assessing hazards at the scene, patient extrication, spine immobilization (n = 98), application of oxygen (n = 94), measurement of vital signs (n = 114), splinting of 59 limbs, and the following ATLS procedures: endotracheal intubation (n = 31), IV access (n = 106), ECG monitoring (n = 69), procurement of blood for tests including type and cross (n = 58), and application of a pneumatic antishock garment (PASG) (n = 31). On-scene times were analyzed according to the number of ATLS procedures performed: insertion of one IV line (n = 46), 14.8 +/- 1.03 minutes; two IV lines (n = 28), 13.4 +/- 0.92; one IV line plus intubation (n = 7), 14.0 +/- 2.94; two IV lines plus intubation (n = 9), 17.0 +/- 2.38; and two IV lines plus intubation plus PASG (n = 13), 12.4 +/- 1.36. Of the 161 IV attempts, 94% were completed successfully. Of 36 attempts at endotracheal intubation, 89% were successful.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:3826807

  5. Overview of Selected Light-Weight Mirror Development Programs at GSFC

    NASA Technical Reports Server (NTRS)

    Keski-Kuha, Ritva A.; Content, David A.; Krebs, Carolyn (Technical Monitor)

    2001-01-01

    This paper discusses selected light-weight mirror development programs at GSFC, including development of light-weight, precision, low scatter imaging mirror for ultraviolet applications, foam core mirrors for visible and IR applications, and light-weight SiC mirrors.

  6. A lightweight vertical rosette for deployment in ice-covered waters

    NASA Astrophysics Data System (ADS)

    Smethie, William M., Jr.; Chayes, Dale; Perry, Richard; Schlosser, Peter

    2011-04-01

    A lightweight modular rosette system has been developed that can be launched and recovered from aircraft in ice-covered waters through a 12 in. diameter hole in the ice. The small diameter is achieved by the modular design, in which a CTD module is attached to the end of a conducting cable and water bottle modules (four 4-L bottles per module) are positioned vertically above it. A novel tripping mechanism based on melting a link of monofilament line is used to close the water bottles at the desired depths. After launching the rosette, the cast proceeds like a normal rosette cast with the traces of temperature, salinity, oxygen and other desired sensors being displayed on a computer screen during the down and up casts and tripping the bottles electronically at the desired depths on the up cast. A Seabird 19+ CTD and Seabird 43 oxygen sensor are mounted in the CTD module and data acquisition and bottle tripping are controlled using a Seabird 33 deck unit and Seabird's SeaSave software run on a laptop computer. Deployment and recovery are done in a heated tent attached to the aircraft to prevent the water from freezing. After recovery the bottle modules are placed in coolers with bags of snow to stabilize the cooler temperature close to 0 °C, which is within ±1.8 °C of the in situ temperature, and the modules are transported back to a base camp for subsampling and sample processing. This system has been used to collect over 250 water samples in the ice-covered Lincoln Sea and the quality of the samples for dissolved gases and other constituents has been excellent.

  7. Trends in trauma: a rural experience.

    PubMed

    Gupta, Gaurav C; Golhar, K B; Mehta, V K; Swapnil, D

    2014-08-01

    In last 20 years a progressive increase in the cases of road traffic accidents is seen in the institution. In this study efforts have been made to study epidemiology of trauma & how to help the trauma victims in a better way. To study the changing trends in incidence & presentation of trauma victims. To recommend preventive measures based on the analysis. The present study was carried out in MGIMS, Sewagram, Wardha from 2001 to 2003. For this study which is retrospective and prospective, a total of 986 cases of surgical trauma were studied. Present study showed that in this rural area accidents account for maximum trauma admissions & major trauma only in 20 %. Out of 986 patients, 78.8 % required repair of wounds, 3.8 % required exploratory laparotomy and 16.3 % had orthopedic interventions. Overall mortality rate was 2.9 %. It was found that general care in wards was good in terms of trauma results of rural areas. These results may vary when compared with specialized trauma centers in cities; however after a period of few years cost effectiveness of trauma centers in terms of benefits needs an assessment*. PMID:25278648

  8. Advanced technologies in trauma critical care management.

    PubMed

    Cannon, Jeremy W; Chung, Kevin K; King, David R

    2012-08-01

    Care of critically injured patients has evolved over the 50 years since Shoemaker established one of the first trauma units at Cook County Hospital in 1962. Modern trauma intensive care units offer a high nurse-to-patient ratio, physicians and midlevel providers who manage the patients, and technologically advanced monitors and therapeutic devices designed to optimize the care of patients. This article describes advances that have transformed trauma critical care, including bedside ultrasonography, novel patient monitoring techniques, extracorporeal support, and negative pressure dressings. It also discusses how to evaluate the safety and efficacy of future advances in trauma critical care. PMID:22850154

  9. Childhood traumas: an outline and overview.

    PubMed

    Terr, L C

    1991-01-01

    Childhood psychic trauma appears to be a crucial etiological factor in the development of a number of serious disorders both in childhood and in adulthood. Like childhood rheumatic fever, psychic trauma sets a number of different problems into motion, any of which may lead to a definable mental condition. The author suggests four characteristics related to childhood trauma that appear to last for long periods of life, no matter what diagnosis the patient eventually receives. These are visualized or otherwise repeatedly perceived memories of the traumatic event, repetitive behaviors, trauma-specific fears, and changed attitudes about people, life, and the future. She divides childhood trauma into two basic types and defines the findings that can be used to characterize each of these types. Type I trauma includes full, detailed memories, "omens," and misperceptions. Type II trauma includes denial and numbing, self-hypnosis and dissociation, and rage. Crossover conditions often occur after sudden, shocking deaths or accidents that leave children handicapped. In these instances, characteristics of both type I and type II childhood traumas exist side by side. There may be considerable sadness. Each finding of childhood trauma discussed by the author is illustrated with one or two case examples. PMID:1824611

  10. Trauma therapy for death row families.

    PubMed

    Long, Walter C

    2011-01-01

    The family members of death row inmates undergo unique suffering that includes disenfranchised grief and intense psychological trauma. In Texas, where executions occur at a rate of 1 every 2 weeks, this class of trauma victims presumably is large, a fact that should generate public mental health concern. Yet the class remains virtually unknown to the therapeutic community. Very little has been done to address the trauma healing needs of death row families. This theoretical paper proposes that structural therapy designed to reengage attachment relationships and reempower family members' innate resources to emotionally regulate one another may provide one of the most effective means of helping this population survive trauma. PMID:21967176

  11. Trauma Exposure and Posttraumatic Symptoms in Hawaii

    PubMed Central

    Klest, Bridget; Freyd, Jennifer J.; Foynes, Melissa Ming

    2013-01-01

    Eight-hundred thirty-three members of an ethnically diverse longitudinal cohort study in Hawaii were surveyed about their personal exposure to several types of traumatic events, socioeconomic resources, and mental health symptoms. Results replicated findings from prior research that while men and women are exposed to similar rates of trauma overall, women report more exposure to traumas high in betrayal (HB), while men report exposure to more traumas lower in betrayal (LB). Trauma exposure was predictive of mental health symptoms, with neglect, household dysfunction, and HB traumas predicting symptoms of depression, anxiety, PTSD, dissociation, and sleep disturbance, and LB traumas predicting PTSD and dissociation symptoms. Native Hawaiian ethnicity and poorer socioeconomic status were predictive of greater trauma exposure and symptoms. Results suggest that more inclusive definitions of trauma are important for gender equity, and that ethnic group variation in symptoms is better explained by factors such as differential trauma exposure and economic and social status differences, rather than minority status per se. PMID:24660048

  12. Alignment and Integration of Lightweight Mirror Segments

    NASA Technical Reports Server (NTRS)

    Evans, Tyler; Biskach, Michael; Mazzarella, Jim; McClelland, Ryan; Saha, Timo; Zhang, Will; Chan, Kai-Wing

    2011-01-01

    The optics for the International X-Ray Observatory (IXO) require alignment and integration of about fourteen thousand thin mirror segments to achieve the mission goal of 3.0 square meters of effective area at 1.25 keV with an angular resolution of five arc-seconds. These mirror segments are 0.4 mm thick, and 200 to 400 mm in size, which makes it difficult not to impart distortion at the sub-arc-second level. This paper outlines the precise alignment, permanent bonding, and verification testing techniques developed at NASA's Goddard Space Flight Center (GSFC). Improvements in alignment include new hardware and automation software. Improvements in bonding include two module new simulators to bond mirrors into, a glass housing for proving single pair bonding, and a Kovar module for bonding multiple pairs of mirrors. Three separate bonding trials were x-ray tested producing results meeting the requirement of sub ten arc-second alignment. This paper will highlight these recent advances in alignment, testing, and bonding techniques and the exciting developments in thin x-ray optic technology development.

  13. Lightweight, Flexible Solar Cells on Stainless Steel Foil and Polymer for Space and Stratospheric Applications

    NASA Technical Reports Server (NTRS)

    Beernink, Kevin; Guha, Subhendu; Yang, Jeff; Banerjee, Arindam; Lord, Ken; DeMaggio, Greg; Liu, Frank; Pietka, Ginger; Johnson, Todd; Reinhout, Melanie; Younan, Kais; Wolf, David

    2007-01-01

    The availability of low-cost, lightweight and reliable photovoltaic (PV) modules is an important component in reducing the cost of satellites and spacecraft. In addition, future high-power spacecraft will require lightweight PV arrays with reduced stowage volume. In terms of the requirements for low mass, reduced stowage volume, and the harsh space environment, thin film amorphous silicon (a-Si) alloy cells have several advantages over other material technologies (1). The deposition process is relatively simple, inexpensive, and applicable to large area, lightweight, flexible substrates. The temperature coefficient has been found to be between -0.2 and -0.3 %/degC for high-efficiency triple-junction a-Si alloy cells, which is superior for high temperature operation compared to crystalline Si and triple-junction GaAs/InGaP/Ge devices at 0.53 %/degC and 0.45 %/degC, respectively (2). As a result, the reduction in efficiency at high temperature typical in space conditions is less for a-Si alloy cells than for their crystalline counterparts. Additionally, the a-Si alloy cells are relatively insensitive to electron and proton bombardment. We have shown that defects that are created by electrons with energies between 0.2 to 2 MeV with fluence up to 1x10(exp 15) e/sq cm and by protons with energy in the range 0.3 MeV to 5 MeV with fluence up to 1x10(exp 13) p/sq cm can be annealed out at 70 C in less than 50 hours (1). Further, modules incorporating United Solar s a-Si alloy cells have been tested on the MIR space station for 19 months with only minimal degradation (3). For stratospheric applications, such as the high altitude airship, the required PV arrays are typically of considerably higher power than current space arrays. Airships typically have a large area available for the PV, but weight is of critical importance. As a result, low cost and high specific power (W/kg) are key factors for airship PV arrays. Again, thin-film a-Si alloy solar cell technology is well

  14. ORNL Lightweighting Research Featured on MotorWeek

    SciTech Connect

    2014-04-15

    PBS MotorWeek, television's longest running automotive series, featured ORNL lightweighting research for vehicle applications in an episode that aired in early April 2014. The crew captured footage of research including development of new metal alloys, additive manufacturing, carbon fiber production, advanced batteries, power electronics components, and neutron imaging applications for materials evaluation.

  15. ORNL Lightweighting Research Featured on MotorWeek

    ScienceCinema

    None

    2014-06-03

    PBS MotorWeek, television's longest running automotive series, featured ORNL lightweighting research for vehicle applications in an episode that aired in early April 2014. The crew captured footage of research including development of new metal alloys, additive manufacturing, carbon fiber production, advanced batteries, power electronics components, and neutron imaging applications for materials evaluation.

  16. FY2013 Lightweight Materials R&D Annual Progress Report

    SciTech Connect

    none,

    2014-02-01

    As part of the U.S. Department of Energy’s (DOE’s) Vehicle Technologies Program (VTO), the Lightweight Materials (LM) activity focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce light and heavy duty vehicle weight without compromising other attributes such as safety, performance, recyclability, and cost.

  17. Lightweight pressure vessels and unitized regenerative fuel cells

    SciTech Connect

    Mitlitsky, F.; Myers, B.; Weisberg, A.H.

    1996-12-31

    High specific energy (>400 Wh/kg) energy storage systems have been designed using lightweight pressure vessels in conjunction with unitized regenerative fuel cells (URFCs). URFCs produce power and electrolytically regenerate their reactants using a single stack of reversible cells. Although a rechargeable energy storage system with such high specific energy has not yet been fabricated, we have made progress towards this goal. A primary fuel cell (FC) test rig with a single cell (0.05 ft{sup 2} active area) has been modified and operated reversibly as a URFC. This URFC uses bifunctional electrodes (oxidation and reduction electrodes reverse roles when switching from charge to discharge, as with a rechargeable battery) and cathode feed electrolysis (water is fed from the oxygen side of the cell). Lightweight pressure vessels with state-of-the-art performance factors (burst pressure * internal volume/tank weight = Pb V/W) have been designed and fabricated. These vessels provide a lightweight means of storing reactant gases required for fuel cells (FCs) or URFCs. The vessels use lightweight bladder liners that act as inflatable mandrels for composite overwrap and provide the permeation barrier for gas storage. The bladders are fabricated using materials that are compatible with humidified gases which may be created by the electrolysis of water and are compatible with elevated temperatures that occur during fast fills.

  18. 3D-printing of lightweight cellular composites.

    PubMed

    Compton, Brett G; Lewis, Jennifer A

    2014-09-10

    A new epoxy-based ink is reported, which enables 3D printing of lightweight cellular composites with controlled alignment of multiscale, high-aspectratio fiber reinforcement to create hierarchical structures inspired by balsa wood. Young's modulus values up to 10 times higher than existing commercially available 3D-printed polymers are attainable, while comparable strength values are maintained. PMID:24942232

  19. Lightweighting Impacts on Fuel Economy, Cost, and Component Losses

    SciTech Connect

    Brooker, A. D.; Ward, J.; Wang, L.

    2013-01-01

    The Future Automotive Systems Technology Simulator (FASTSim) is the U.S. Department of Energy's high-level vehicle powertrain model developed at the National Renewable Energy Laboratory. It uses a time versus speed drive cycle to estimate the powertrain forces required to meet the cycle. It simulates the major vehicle powertrain components and their losses. It includes a cost model based on component sizing and fuel prices. FASTSim simulated different levels of lightweighting for four different powertrains: a conventional gasoline engine vehicle, a hybrid electric vehicle (HEV), a plug-in hybrid electric vehicle (PHEV), and a battery electric vehicle (EV). Weight reductions impacted the conventional vehicle's efficiency more than the HEV, PHEV and EV. Although lightweighting impacted the advanced vehicles' efficiency less, it reduced component cost and overall costs more. The PHEV and EV are less cost effective than the conventional vehicle and HEV using current battery costs. Assuming the DOE's battery cost target of $100/kWh, however, the PHEV attained similar cost and lightweighting benefits. Generally, lightweighting was cost effective when it costs less than $6/kg of mass eliminated.

  20. Friction Stir Welding of Lightweight Vehicle Structures: Final Report

    SciTech Connect

    Sanella, M L

    2008-08-31

    The purpose of this Cooperative Research and Development Agreement (CRADA) between UTBattelle, LLC and Ford Motor Company was to establish friction stir welding (FSW) and friction stir processing as viable options for use in construction of lightweight substructures for trucks and cars, including engine cradles, suspension sub frames, instrument panel supports, and intake manifolds.

  1. MPWide: Light-weight communication library for distributed computing

    NASA Astrophysics Data System (ADS)

    Groen, Derek; Rieder, Steven; Grosso, Paola; de Laat, Cees; Portegies Zwart, Simon

    2012-12-01

    MPWide is a light-weight communication library for distributed computing. It is specifically developed to allow message passing over long-distance networks using path-specific optimizations. An early version of MPWide was used in the Gravitational Billion Body Project to allow simulations across multiple supercomputers.

  2. FY2010 Annual Progress Report for Lightweighting Materials

    SciTech Connect

    none,

    2011-01-15

    The Lightweight Materials activity (LM) within the Vehicle Technologies Program focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce light and heavy duty vehicle weight without compromising other attributes such as safety, performance, recyclability, and cost.

  3. Process for producing nickel electrode having lightweight substrate

    NASA Technical Reports Server (NTRS)

    Lim, Hong S. (Inventor)

    1996-01-01

    A nickel electrode having a lightweight porous nickel substrate is subjected to a formation cycle involving heavy overcharging and under-discharging in a KOH electrolyte having a concentration of 26% to 31%, resulting in electrodes displaying high active material utilization.

  4. Comfortable, lightweight safety helmet holds radio transmitter, receiver

    NASA Technical Reports Server (NTRS)

    Atlas, N. D.

    1964-01-01

    For two-way radio communication where safety gear is required, a lightweight helmet with few protrusions has been designed. The electronics components and power supply are mounted between the inner and outer shells, and resilient padding is used for the lining.

  5. Reducing CO2 Emissions through Lightweight Design and Manufacturing

    NASA Astrophysics Data System (ADS)

    Carruth, Mark A.; Allwood, Julian M.; Milford, Rachel L.

    2011-05-01

    To meet targeted 50% reductions in industrial CO2 emissions by 2050, demand for steel and aluminium must be cut. Many steel and aluminium products include redundant material, and the manufacturing routes to produce them use more material than is necessary. Lightweight design and optimized manufacturing processes offer a means of demand reduction, whilst creating products to perform the same service as existing ones. This paper examines two strategies for demand reduction: lightweight product design; and minimizing yield losses through the product supply chain. Possible mass savings are estimated for specific case-studies on metal-intensive products, such as I-beams and food cans. These estimates are then extrapolated to other sectors to produce a global estimate for possible demand reductions. Results show that lightweight product design may offer potential mass savings of up to 30% for some products, whilst yield in the production of others could be improved by over 20%. If these two strategies could be combined for all products, global demand for steel and aluminium would be reduced by nearly 50%. The impact of demand reduction on CO2 emissions is presented, and barriers to the adoption of new, lightweight technologies are discussed.

  6. Lightweight Inexpensive Ozone Lidar Telescope Using a Plastic Fresnel Lens

    NASA Technical Reports Server (NTRS)

    DeYoung, Russell J.; Notari, Anthony; Carrion, William; Pliutau, Denis

    2014-01-01

    An inexpensive lightweight ozone lidar telescope was designed, constructed and operated during an ozone lidar field campaign. This report summarizes the design parameters and performance of the plastic Fresnel lens telescope and shows the ozone lidar performance compared to Zemax calculations.

  7. Low scatter lightweight fission spectrometer constructed for biological research

    NASA Technical Reports Server (NTRS)

    Frigerio, N. A.

    1968-01-01

    Low scatter, lightweight fission spectrometer provides a simple, reliable method for determining absolute neutron fluxes in a fixed neutron. It minimizes neutron scatter and energy degradation effects, and has a counting volume large enough to intercept the most energetic fission fragments, yet small enough to be discriminating.

  8. Expanding Trauma through Space and Time: Mapping the Rhetorical Strategies of Trauma Carrier Groups

    ERIC Educational Resources Information Center

    Degloma, Thomas

    2009-01-01

    In this article, I detail two rhetorical strategies that trauma carrier groups--including social movement organizations, professional mental health associations, and patient advocacy groups--use to expand the relevance of trauma and Post-Traumatic Stress Disorder (PTSD) through space and time: the social transmission of trauma and the social…

  9. Multiaxis, Lightweight, Computer-Controlled Exercise System

    NASA Technical Reports Server (NTRS)

    Haynes, Leonard; Bachrach, Benjamin; Harvey, William

    2006-01-01

    The multipurpose, multiaxial, isokinetic dynamometer (MMID) is a computer-controlled system of exercise machinery that can serve as a means for quantitatively assessing a subject s muscle coordination, range of motion, strength, and overall physical condition with respect to a wide variety of forces, motions, and exercise regimens. The MMID is easily reconfigurable and compactly stowable and, in comparison with prior computer-controlled exercise systems, it weighs less, costs less, and offers more capabilities. Whereas a typical prior isokinetic exercise machine is limited to operation in only one plane, the MMID can operate along any path. In addition, the MMID is not limited to the isokinetic (constant-speed) mode of operation. The MMID provides for control and/or measurement of position, force, and/or speed of exertion in as many as six degrees of freedom simultaneously; hence, it can accommodate more complex, more nearly natural combinations of motions and, in so doing, offers greater capabilities for physical conditioning and evaluation. The MMID (see figure) includes as many as eight active modules, each of which can be anchored to a floor, wall, ceiling, or other fixed object. A cable is payed out from a reel in each module to a bar or other suitable object that is gripped and manipulated by the subject. The reel is driven by a DC brushless motor or other suitable electric motor via a gear reduction unit. The motor can be made to function as either a driver or an electromagnetic brake, depending on the required nature of the interaction with the subject. The module includes a force and a displacement sensor for real-time monitoring of the tension in and displacement of the cable, respectively. In response to commands from a control computer, the motor can be operated to generate a required tension in the cable, to displace the cable a required distance, or to reel the cable in or out at a required speed. The computer can be programmed, either locally or via

  10. The trauma of a recession.

    PubMed

    Murphy, S M; Kieran, I; Shaughnessy, M O

    2011-09-01

    Employment in construction in Ireland fell by 10% from nearly 282,000 in the second quarter of 2007 to 255,000 in the same period of 2008. Our study looks at the differences in soft tissue upper limb trauma dynamics of a pre- and post-recession Ireland. Construction accounted for 330 patients (27%) of all hand injuries in 2006, but only 18 (3%) in 2009. Our data shows a significant drop in hand injuries related to the construction industry, and more home/DIY cases and deliberate self-harm presenting in their stead. PMID:21431394

  11. Interactive work place trauma (IWPT).

    PubMed

    Shewchuk, Muriel

    2005-06-01

    Tragically, horizontal violence and bullying behaviour being master minded by nursing colleagues is firmly entrenched in many perioperative environments--just like a serious pathological bacteria. Interactive Workplace Trauma (IWPT) is ugly, mean, destructive, demoralizing and counterproductive to efficient, effective patient care and positive staff performance. Get educated and use astute observations to ensure you clearly understand what is occurring. Make sure the staff feel safe and have the appropriate, necessary protection to deal with unacceptable conduct. Deal effectively with the bullies. Remember if it is not documented, it didn't happen! PMID:16092572

  12. Blunt abdominal trauma in children.

    PubMed

    Tepas, J J

    1993-06-01

    The growing popularity of nonoperative treatment of children with splenic injuries has seduced some physicians into a false sense of security regarding care of the injured child. Although it has been established that hemodynamically stable children with splenic, hepatic, and even renal injuries can safely be treated "expectantly," this concept cannot be applied indiscriminately. Accurate diagnosis and effective care of the child with blunt abdominal trauma is an exercise of clinical precision that demands attention to detail and thorough evaluation. This review addresses this process in light of recent advances in diagnostic imaging and in consideration of recent reports analyzing different protocols for therapeutic decision making. PMID:8374651

  13. Taser-Related Testicular Trauma.

    PubMed

    Theisen, Katherine; Slater, Rick; Hale, Nathan

    2016-02-01

    The Thomas A. Swift's Electric Rifle (Taser) is an electrical weapon designed as a nonlethal means to subdue violent or fleeing subjects. Several reports have been published on the safety and efficacy of, as well as injury profile from, police Tasers. Documented urologic involvement is rare. The sequela of an electrical current from a Taser gun to the testis in regard to both short- and long-term functions is unknown. Herein we present a case of penetrating trauma to the scrotum from a Taser dart. PMID:26592466

  14. Trauma, soul murder, and change.

    PubMed

    Shengold, Leonard

    2011-01-01

    The author discusses trauma, particularly in relation to childhood events, as well as one of its possible sequelae, soul murder (Shengold 1989, 1999). Negative interactions with parental figures can have long-term implications for the developing child, sometimes persisting into adulthood, and yet even the most loving parents cannot always behave toward the child in an optimal manner. The profound effect of change on the human psyche is also discussed, and two clinical vignettes are presented to illustrate the author's points. PMID:21388002

  15. Experimental Trauma Models: An Update

    PubMed Central

    Frink, Michael; Andruszkow, Hagen; Zeckey, Christian; Krettek, Christian; Hildebrand, Frank

    2011-01-01

    Treatment of polytrauma patients remains a medical as well as socioeconomic challenge. Although diagnostics and therapy improved during the last decades, multiple injuries are still the major cause of fatalities in patients below 45 years of age. Organ dysfunction and organ failure are major complications in patients with major injuries and contribute to mortality during the clinical course. Profound understanding of the systemic pathophysiological response is crucial for innovative therapeutic approaches. Therefore, experimental studies in various animal models are necessary. This review is aimed at providing detailed information of common trauma models in small as well as in large animals. PMID:21331361

  16. Trauma and Violence in Autism.

    PubMed

    Westphal, Alexander

    2016-06-01

    Comorbidities of autism spectrum disorder are discussed as an introduction to the argument that, although ASD may modify presentation, it does not confer any protection against other disorder, including the negative effects of trauma (e.g., posttraumatic stress disorder). Dr. Im's hypotheses are discussed, and a case example of childhood disintegrative disorder (CDD) is raised to give clinical support to his hypotheses. CDD is a rare form of ASD that is defined by late onset, a traumatic prodrome, onset of behaviors including some with similarities to PTSD, and aggression. PMID:27236175

  17. Heterotopic Ossification in Orthopaedic Trauma

    PubMed Central

    Nauth, Aaron; Giles, Erica; Potter, Benjamin K.; Nesti, Leon J.; O’Brien, Frederick P.; Bosse, Michael J.; Anglen, Jeffrey O.; Mehta, Samir; Ahn, Jaimo; Miclau, Theodore; Schemitsch, Emil H.

    2012-01-01

    Heterotopic ossification (HO) can be defined as the pathological formation of bone in extra-skeletal tissues. There has been a substantial amount of recent research on the pathophysiology, prophylaxis and treatment of HO and traumatic conditions associated with the development of HO. This research has advanced our understanding of this disease and helped to clarify evidence-based approaches to both the prophylaxis and treatment of HO. This article reviews the literature on these topics with a focus on their application in orthopaedic trauma. PMID:23010648

  18. A Challenging Penetrating Trauma Case.

    PubMed

    Snoek, Seetal; Butson, Benjamin; Wittenberg, Mark

    2016-01-01

    We present the prehospital management of a 23-year-old Australian Aboriginal man with an isolated knife stab wound to the posterior right chest. The lead author attended to the prehospital management of this young man during tenure as a registrar in retrieval medicine for CareFlight Medical Services (CMS) in North Queensland, Australia. The case is noteworthy because it involved a combination of a life-threatening injury with a superimposed iatrogenic injury. The case will be of interest to physicians and clinicians in prehospital medicine as well as those in low-volume emergency departments or facilities in which major trauma may present infrequently. PMID:27021676

  19. The 5000 GPM firefighting module evaluation test

    NASA Technical Reports Server (NTRS)

    Burns, Ralph A.

    1986-01-01

    The 5000 GPM Firefighting Module development was sponsored and shared by the Navy Facilities Engineering Command. It is a lightweight, compact, self-contained, helicopter-transportable unit for fighting harbor and other specialty fires as well as for use in emergency and shipboard water pumping applications. This unit is a more advanced model of the original 1500 GPM module developed for the U.S. Coast Guard. The module and an evaluation test program conducted at the North Island Naval Air Station, San Diego, California, by NASA and the U.S. Navy, are described.

  20. Vicarious Trauma Among Sexual Assault Nurse Examiners.

    PubMed

    Raunick, Cara Berg; Lindell, Deborah F; Morris, Diana Lynn; Backman, Theresa

    2015-01-01

    Vicarious trauma (VT), the phenomenon of changes in cognition and worldview that result from empathic response and repeated exposure to narratives of trauma, is a risk for helping professionals. This descriptive, correlational study sought to examine levels of VT among sexual assault nurse examiners (SANEs) as compared with other women's health nurses. It also explored whether levels of VT are different for nurses who have experienced primary trauma alone, VT alone, or both personal trauma and VT. VT was assessed through an anonymous online survey using the nurses' total scores on the Trauma and Attachment Belief Scale. Trauma and Attachment Belief Scale scores were significantly higher for SANEs (M = 178.5, SD = 42.6) than for women's health nurses (M = 168.1, SD = 41.4; p = 0.025), indicating higher levels of trauma-related cognitive disruption in the SANE group. Scores were also significantly higher for both groups with personal trauma histories at the p < 0.05 level compared with the women's health nurses with no personal history. SANEs who had no personal history of trauma did not differ significantly from either group of nurses who did, suggesting that VT from working as an SANE is associated with levels of cognitive disruption similar to oneself having experienced trauma. Nurses should be aware of this phenomenon and its sequelae when choosing to pursue the specialty of sexual assault nursing. Hospitals and other organizations employing SANEs should also be aware of VT and provide a support system with resources in place to mitigate these effects. Future research should further explore effects of primary trauma versus VT, clinical manifestations and significance of varying levels of VT, and interventions and strategies for dealing with VT. PMID:26226351

  1. [Trauma scores: reproducibility and reliability].

    PubMed

    Waydhas, C; Nast-Kolb, D; Trupka, A; Kerim-Sade, C; Kanz, G; Zoller, J; Schweiberer, L

    1992-02-01

    The inter-rater reliability of the Injury Severity Score (ISS) and the Polytraumaschlüssel (PTS) [multiple trauma code] was studied using diagnosis sheets filled in for 107 multiple injured patients. The scoring was performed by eight physicians with different levels of qualification. The scores for individual patients varied widely depending on the scorer, with extremes differing from the mean by about 80% and 70% for the ISS and PTS, respectively. The mean ISS and PTS for the whole study population also varied significantly between the scorers (P less than 0.0001, one-way analysis of variance). Raters with experience in trauma scoring calculated significantly higher scores (P less than 0.01, t-test) Neither the ISS nor the PTS seem reliable enough to describe injury severity in an individual patient. Treatment decisions must not be based on such grounds. Even for larger groups, caution must be exercised in comparison of different populations of multiple traumatized patients. PMID:1570531

  2. Management of temporal bone trauma.

    PubMed

    Patel, Alpen; Groppo, Eli

    2010-06-01

    The temporal bones are paired structures located on the lateral aspects of the skull and contribute to the skull base. Trauma is usually the result of blunt head injury and can result in damage to the brain and meninges, the middle and internal ear, and the facial nerve. Complications can include intracranial hemorrhage, cerebral contusion, CSF leak and meningitis, hearing loss, vertigo, and facial paralysis. To prevent these complications, diagnosis followed by appropriate medical and surgical management is critical. Diagnosis relies primarily on physical signs and symptoms as well as radiographic imaging. Emergent intervention is required in situations involving herniation of the brain into the middle ear cavity or hemorrhage of the intratemporal carotid artery. Patients with declining facial nerve function are candidates for early surgical intervention. Conductive hearing loss can be corrected surgically as an elective procedure, while sensorineural hearing loss carries a poor prognosis, regardless of management approach. Children generally recover from temporal bone trauma with fewer complications than adults and experience a markedly lower incidence of facial nerve paralysis. PMID:22110824

  3. Imaging following acute knee trauma.

    PubMed

    Kijowski, R; Roemer, F; Englund, M; Tiderius, C J; Swärd, P; Frobell, R B

    2014-10-01

    Joint injury has been recognized as a potent risk factor for the onset of osteoarthritis. The vast majority of studies using imaging technology for longitudinal assessment of patients following joint injury have focused on the injured knee joint, specifically in patients with anterior cruciate ligament injury and meniscus tears where a high risk for rapid onset of post-traumatic osteoarthritis is well known. Although there are many imaging modalities under constant development, magnetic resonance (MR) imaging is the most important instrument for longitudinal monitoring after joint injury. MR imaging is sensitive for detecting early cartilage degeneration and can evaluate other joint structures including the menisci, bone marrow, tendons, and ligaments which can be sources of pain following acute injury. In this review, focusing on imaging following acute knee trauma, several studies were identified with promising short-term results of osseous and soft tissue changes after joint injury. However, studies connecting these promising short-term results to the development of osteoarthritis were limited which is likely due to the long follow-up periods needed to document the radiographic and clinical onset of the disease. Thus, it is recommended that additional high quality longitudinal studies with extended follow-up periods be performed to further investigate the long-term consequences of the early osseous and soft tissue changes identified on MR imaging after acute knee trauma. PMID:25278054

  4. Imaging patients with cardiac trauma.

    PubMed

    Restrepo, Carlos S; Gutierrez, Fernando R; Marmol-Velez, Juan A; Ocazionez, Daniel; Martinez-Jimenez, Santiago

    2012-01-01

    In the United States, trauma is the leading cause of death among those who are 1-44 years old, with cardiovascular injuries representing the second most common cause of traumatic death after central nervous system injuries. Evaluation of trauma patients with suspected cardiac injury may be complex and include electrocardiography, measurement of cardiac biomarkers, and imaging examinations. Contrast material-enhanced computed tomography (CT) has become one of the most valuable imaging tools available for evaluating hemodynamically stable patients with suspected cardiac injury. The presence of hemopericardium, with or without cardiac tamponade, is one of the most significant findings of cardiac injury. Other complications that result from blunt cardiac injury, such as pericardial rupture and cardiac herniation, may be readily depicted at multidetector CT. Assessment of patients with cardiac injuries, particularly those with penetrating injuries, is a challenging and time-critical matter, with clinical and imaging findings having complementary roles in the formation of an accurate diagnosis. Patients who are hemodynamically stable, particularly those with penetrating cardiac injuries, also may benefit from a timely imaging examination. In addition to chest radiography, other available modalities such as transthoracic and transesophageal echocardiography, nuclear medicine, and magnetic resonance imaging may play a role in selected cases. PMID:22582351

  5. [Update: blast and explosion trauma].

    PubMed

    van de Weyer, P S; Praetorius, M; Tisch, M

    2011-08-01

    In recent decades, acoustic shock and explosion traumas have increased in frequency in the general population. Beside the use of fireworks and firearms, airbag ignitions and explosions caused by terror or suicidal acts are also relevant. Depending on duration and strength of the sound pressure affecting the human ear, isolated inner ear damage or additional ear drum perforation and interruption of the middle ear ossicle chain can result. By means of otoscopy, pure tone audiometry, measurement of otoacoustic emissions, and other neurootological examinations, the severity of the trauma can be determined. With prompt and adequate therapy, permanent hearing loss can be minimized. In particular, the measurement of otoacoustic emissions allows conclusions to be made on the functionality of the outer hair cells which are damaged first in most cases. Histological investigations on noise-exposed cochleas show extensive damage to the outer hair cells in the frequency range between 1.0 and 4.0 kHz, which correlates well with audiometric measurements. PMID:21769579

  6. Orbital emphysema following remote skull trauma.

    PubMed

    Brown, S M; Lissner, G

    1995-06-01

    In an unusual case of orbital emphysema following nose blowing, a reliable patient history and examination demonstrated no direct trauma to the orbit. Blunt posterior skull trauma was sustained several hours before the development of the orbital emphysema. A "seismic" transmittal of force to the orbital walls is postulated. PMID:7654620

  7. Imaging of orthopedic trauma and surgery

    SciTech Connect

    Berquist, T.H.

    1986-01-01

    This book discusses imaging of orthopedia trauma and surgery. A review of the pertinent anatomy, mechanism of injury, and radiology and orthopedic classification is provided for each topic discussed. The book employs recent advances in technique and focuses on adult skeletal trauma, and joint replacement.

  8. Trauma-Informed Forensic Child Maltreatment Investigations

    ERIC Educational Resources Information Center

    Pence, Donna M.

    2011-01-01

    Trauma-informed child welfare systems (CWSs) are the focus of several recent national and state initiatives. Since 2005 social work publications have focused on systemic and practice changes within CW which seek to identify and reduce trauma to children and families experiencing child maltreatment or other distressing events, as well as to the…

  9. Healing Trauma, Building Resilience: SITCAP in Action

    ERIC Educational Resources Information Center

    Steele, William; Kuban, Caelan

    2014-01-01

    Childhood trauma is marked by an overwhelming sense of terror and powerlessness. Loss of loving relationships is yet another type of trauma that produces the pain of sadness and grief. The resulting symptoms only reflect the neurological, biological, and emotional coping systems mobilized in the struggle to survive. These young people need new…

  10. Trauma among Street-Involved Youth

    ERIC Educational Resources Information Center

    Bender, Kimberly A.; Thompson, Sanna J.; Ferguson, Kristin M.; Yoder, Jamie R.; Kern, Leah

    2014-01-01

    Previous research documents that street-involved youth experience rates of trauma and posttraumatic stress disorder (PTSD) that are significantly higher than their housed counterparts. Trauma and PTSD are of particular concern for homeless youth as they can negatively affect youths' ability to function adaptively and to transition off the…

  11. Dental and General Trauma in Team Handball.

    PubMed

    Petrović, Mateja; Kühl, Sebastian; Šlaj, Martina; Connert, Thomas; Filippi, Andreas

    2016-01-01

    Handball has developed into a much faster and high-impact sport over the past few years because of rule changes. Fast sports with close body contact are especially prone to orofacial trauma. Handball belongs to a category of sports with medium risk for dental trauma. Even so, there is only little literature on this subject. The aim of this study was to examine the prevalence and the type of injuries, especially the occurrence of orofacial trauma, habits of wearing mouthguards, as well as degree of familiarity with the tooth rescue box. For this purpose, 77.1% (n=542/703) of all top athletes and coaches from the two highest Swiss leagues (National League A and National League B), namely 507 professional players and 35 coaches, were personally interviewed using a standardized questionnaire. 19.7% (n=100/507) of the players experienced dental trauma in their handball careers, with 40.8% (n=51/125) crown fractures being the most frequent by far. In spite of the relatively high risk of lip or dental trauma, only 5.7% (n=29/507) of the players wear mouthguards. The results of this study show that dental trauma is common among Swiss handball players. In spite of the high risk of dental trauma, the mouthguard as prevention is not adequately known, and correct procedure following dental trauma is rarely known at all. PMID:27622524

  12. Tips for Teachers during Times of Trauma.

    ERIC Educational Resources Information Center

    Adkins, Myrna Ann; Harper, Eric

    This guide for teachers in times of trauma was updated after the events of September 11, 2001--the terrorist attacks on the World Trade Center and the Pentagon. These traumatic events could cause refugees to experience trauma or become re-traumatized. For many refugees, their English-as-a-Second-Language (ESL) programs are the places where they…

  13. Impact of Trauma on Attenuated Psychotic Symptoms

    PubMed Central

    Falukozi, Erin; Addington, Jean

    2012-01-01

    Evidence that trauma may play a role in the development of a psychotic illness has lead researchers to investigate the relationship between trauma and the content of attenuated psychotic symptoms. Participants in this study were considered to be at clinical high risk for developing psychosis by meeting criteria for attenuated positive symptom syndrome based on the Structured Interview for Prodromal Syndromes. Trained raters used a specifically designed codebook to identify content in the vignettes of 45 participants. Various types of trauma that had occurred before age 16 were assessed, where participants who endorsed more types of trauma were considered to have experienced a greater amount of trauma. Spearman rank correlations revealed significant positive relationships between increased trauma and feeling watched or followed (rho=0.38, p<0.05) and false beliefs of status or power (rho=0.31, p<0.04). Significant negative relationships were observed between increased trauma and hearing nonnegative voices (rho=−0.39, p<0.01) as well as having unusual negative thoughts surrounding the self (rho=−0.31, p<0.05). Although this was a small sample, these findings support the possibility of a meaningful relationship between experiences of trauma and the content of attenuated positive symptoms. PMID:23155365

  14. The Biology of Trauma: Implications for Treatment

    ERIC Educational Resources Information Center

    Solomon, Eldra P.; Heide, Kathleen M.

    2005-01-01

    During the past 20 years, the development of brain imaging techniques and new biochemical approaches has led to increased understanding of the biological effects of psychological trauma. New hypotheses have been generated about brain development and the roots of antisocial behavior. We now understand that psychological trauma disrupts homeostasis…

  15. The role of hypothalamus-pituitary-adrenal genes and childhood trauma in borderline personality disorder.

    PubMed

    Martín-Blanco, Ana; Ferrer, Marc; Soler, Joaquim; Arranz, Maria Jesús; Vega, Daniel; Calvo, Natalia; Elices, Matilde; Sanchez-Mora, Cristina; García-Martinez, Iris; Salazar, Juliana; Carmona, Cristina; Bauzà, Joana; Prat, Mónica; Pérez, Víctor; Pascual, Juan C

    2016-06-01

    Current knowledge suggests that borderline personality disorder (BPD) results from the interaction between genetic and environmental factors. Research has mainly focused on monoaminergic genetic variants and their modulation by traumatic events, especially those occurring during childhood. However, to the best of our knowledge, there are no studies on the genetics of hypothalamus-pituitary-adrenal (HPA) axis, despite its vulnerability to early stress and its involvement in BPD pathogenesis. The aim of this study was to investigate the contribution of genetic variants in the HPA axis and to explore the modulating effect of childhood trauma in a large sample of BPD patients and controls. DNA was obtained from a sample of 481 subjects with BPD and 442 controls. Case-control differences in allelic frequencies of 47 polymorphisms in 10 HPA axis genes were analysed. Modulation of genetic associations by the presence of childhood trauma was also investigated by dividing the sample into three groups: BPD with trauma, BPD without trauma and controls. Two FKBP5 polymorphisms (rs4713902-C and rs9470079-A) showed significant associations with BPD. There were also associations between BPD and haplotype combinations of the genes FKBP5 and CRHR1. Two FKBP5 alleles (rs3798347-T and rs10947563-A) were more frequent in BPD subjects with history of physical abuse and emotional neglect and two CRHR2 variants (rs4722999-C and rs12701020-C) in BPD subjects with sexual and physical abuse. Our findings suggest a contribution of HPA axis genetic variants to BPD pathogenesis and reinforce the hypothesis of the modulating effect of childhood trauma in the development of this disorder. PMID:26182893

  16. The Wounded Self in Trauma Treatment.

    PubMed

    Kluft, Richard P

    2016-07-01

    The potential role of hypnosis in the treatment of trauma is both venerable and underappreciated. This article underscores the importance of the wounded-self concept by proposing a Kohutian perspective complimentary to the cognitively-driven model of Alladin (2014a, 2014b) discussed elsewhere in this issue. It explores selected topics that demonstrate (1) the importance of considering the wounds to the sense of self experienced by trauma victims and their implications for individualization of treatment in planning a psychotherapy; (2) the possibility of enhancing access to memories using shame alleviating techniques with minimal suggestive properties; (3) the use of hypnosis to facilitate less disruptive processing of traumatic materials; and (4) the importance of hypnosis in enhancing the safety of the trauma patient between sessions. Absent contraindications, the circumspect use of hypnosis as a facilitator of trauma treatment deserves consideration for inclusion in the mainstream of contemporary trauma treatment. PMID:27196011

  17. Next-Generation MKIII Lightweight HUT/Hatch Assembly

    NASA Technical Reports Server (NTRS)

    McCarthy, Mike; Toscano, Ralph

    2013-01-01

    The MK III (H-1) carbon-graphite/ epoxy Hard Upper Torso (HUT)/Hatch assembly was designed, fabricated, and tested in the early 1990s. The spacesuit represented an 8.3 psi (˜58 kPa) technology demonstrator model of a zero prebreathe suit. The basic torso shell, brief, and hip areas of the suit were composed of a carbon-graphite/epoxy composite lay-up. In its current configuration, the suit weighs approximately 120 lb (˜54 kg). However, since future planetary suits will be designed to operate at 0.26 bar (˜26 kPa), it was felt that the suit's re-designed weight could be reduced to 79 lb (˜35 kg) with the incorporation of lightweight structural materials. Many robust, lightweight structures based on the technologies of advanced honeycomb materials, revolutionary new composite laminates, metal matrix composites, and recent breakthroughs in fullerene fillers and nanotechnology lend themselves well to applications requiring materials that are both light and strong. The major problem involves the reduction in weight of the HUT/ Hatch assembly for use in lunar and/or planetary applications, while at the same time maintaining a robust structural design. The technical objective is to research, design, and develop manufacturing methods that support fa b rica - tion of a lightweight HUT/Hatch assembly using advanced material and geometric redesign as necessary. Additionally, the lightweight HUT/Hatch assembly will interface directly with current MK III hardware. Using the new operating pressure and current MK III (H-1) interfaces as a starting block, it is planned to maximize HUT/Hatch assembly weight reduction through material selection and geometric redesign. A hard upper torso shell structure with rear-entry closure and corresponding hatch will be fabricated. The lightweight HUT/Hatch assembly will retrofit and interface with existing MK III (H-1) hardware elements, providing NASA with immediate "plug-andplay" capability. NASA crewmembers will have a lightweight

  18. Multi-Scale Sizing of Lightweight Multifunctional Spacecraft Structural Components

    NASA Technical Reports Server (NTRS)

    Bednarcyk, Brett A.

    2005-01-01

    This document is the final report for the project entitled, "Multi-Scale Sizing of Lightweight Multifunctional Spacecraft Structural Components," funded under the NRA entitled "Cross-Enterprise Technology Development Program" issued by the NASA Office of Space Science in 2000. The project was funded in 2001, and spanned a four year period from March, 2001 to February, 2005. Through enhancements to and synthesis of unique, state of the art structural mechanics and micromechanics analysis software, a new multi-scale tool has been developed that enables design, analysis, and sizing of advance lightweight composite and smart materials and structures from the full vehicle, to the stiffened structure, to the micro (fiber and matrix) scales. The new software tool has broad, cross-cutting value to current and future NASA missions that will rely on advanced composite and smart materials and structures.

  19. Thermal stability of CVD-SiC lightweight optics

    NASA Astrophysics Data System (ADS)

    Goela, Jitendra S.; Desai, Hemant D.; Taylor, Raymond L.; Olson, Steven E.

    1995-10-01

    The lightweight SiC mirrors that are fabricated by the CVD process at Morton Advanced Materials contain graphite core enclosed in the SiC backstructure. A finite element analysis of a lightweight SiC model mirror was performed to assess the effect of the graphite core on the thermal stability of the SiC mirror in the temperature range of 77 - 1623 K. The results indicate that for both no-slip (SiC deposit adhered to graphite core) and slip cases, the maximum stresses in the SiC mirror structure are significantly less than the flexural strength of SiC. Further, the maximum stress in graphite core is close to the tensile strength of graphite indicating that graphite core will probably fracture. Finally, the SiC faceplate figure distortion due to the presence of the graphite core is quite small, on the order of a few tens of nanometers.

  20. Cryogenic performance of a lightweight silicon carbide mirror

    NASA Astrophysics Data System (ADS)

    Eng, Ron; Carpenter, James R.; Foss, Colby A., Jr.; Hadaway, James B.; Haight, Harlan J.; Hogue, William D.; Kane, David; Kegley, Jeffrey R.; Stahl, H. Philip; Wright, Ernest R.

    2005-08-01

    Low cost, high performance lightweight Silicon Carbide (SiC) mirrors provide an alternative to Beryllium mirrors. A Trex Enterprises 0.25m diameter low areal density SiC mirror using its patented Chemical Vapor Composites (CVC) technology was evaluated for its optical performance at cryogenic temperature. CVC SiC is chemically pure, thermally stable, and mechanically stiff. CVC technology yields higher growth rate than that of CVD SiC. NASA has funded lightweight optical materials technology development efforts for future space based telescope programs. As part of these efforts, a Trex SiC mirror was measured interferometrically from room temperature to 30 degrees Kelvin. This paper will discuss the test goals, the cryogenic optical testing infrastructure and instrumentation at MSFC, test results, and lessons learned.

  1. Tendon-Actuated Lightweight In-Space MANipulator (TALISMAN)

    NASA Technical Reports Server (NTRS)

    Dorsey, John T.; Doggett, William R.; Komendera, Erik E.

    2015-01-01

    The robotic architecture of State-of-the-Art (SOA) space manipulators, represented by the Shuttle Remote Manipulator System (SRMS), inherently limits their capabilities to extend reach, reduce mass, apply force and package efficiently. TALISMAN uses a new and innovative robotic architecture that incorporates a combination of lightweight truss links, a novel hinge joint, tendon-articulation and passive tension stiffening to achieve revolutionary performance. A TALISMAN with performance similar to the SRMS has 1/10th of its mass and packages in 1/7th of its volume. The TALISMAN architecture allows its reach to be scaled over a large range; from 10 to over 300 meters. In addition, the dexterity (number of degrees-of-freedom) can be easily adjusted without significantly impacting manipulator mass because the joints are very lightweight.

  2. Lightweight Ceramic Composition of Carbon Silicon Oxygen and Boron

    NASA Technical Reports Server (NTRS)

    Leiser, Daniel B. (Inventor); Hsu, Ming-Ta (Inventor); Chen, Timothy S. (Inventor)

    1997-01-01

    Lightweight, monolithic ceramics resistant to oxidation in air at high temperatures are made by impregnating a porous carbon preform with a sol which contains a mixture of tetraethoxysilane, dimethyldiethoxysilane and trimethyl borate. The sol is gelled and dried on the carbon preform to form a ceramic precursor. The precursor is pyrolyzed in an inert atmosphere to form the ceramic which is made of carbon, silicon, oxygen and boron. The carbon of the preform reacts with the dried gel during the pyrolysis to form a component of the resulting ceramic. The ceramic is of the same size, shape and form as the carbon precursor. Thus, using a porous, fibrous carbon precursor, such as a carbon felt, results in a porous, fibrous ceramic. Ceramics of the invention are useful as lightweight tiles for a reentry spacecraft.

  3. Cost-effective lightweight mirrors for aerospace and defense

    NASA Astrophysics Data System (ADS)

    Woodard, Kenneth S.; Comstock, Lovell E.; Wamboldt, Leonard; Roy, Brian P.

    2015-05-01

    The demand for high performance, lightweight mirrors was historically driven by aerospace and defense (A&D) but now we are also seeing similar requirements for commercial applications. These applications range from aerospace-like platforms such as small unmanned aircraft for agricultural, mineral and pollutant aerial mapping to an eye tracking gimbaled mirror for optometry offices. While aerospace and defense businesses can often justify the high cost of exotic, low density materials, commercial products rarely can. Also, to obtain high performance with low overall optical system weight, aspheric surfaces are often prescribed. This may drive the manufacturing process to diamond machining thus requiring the reflective side of the mirror to be a diamond machinable material. This paper summarizes the diamond machined finishing and coating of some high performance, lightweight designs using non-exotic substrates to achieve cost effective mirrors. The results indicate that these processes can meet typical aerospace and defense requirements but may also be competitive in some commercial applications.

  4. Polymeric foam-ferromagnet composites as smart lightweight materials

    NASA Astrophysics Data System (ADS)

    D’Auria, M.; Davino, D.; Pantani, R.; Sorrentino, L.

    2016-05-01

    A new class of lightweight smart materials based on a polymeric matrix with embedded magnetic micro-particles was developed. The application of a magnetic field (MF) during the foaming of samples induced, along the MF lines, the alignment of magnetic particles dispersed in the polymer thus forming chain-like reinforcing structures. The aligned micro-particles induced an anisotropic mechanical behaviour, strongly improving the mechanical stiffness and strength along the MF direction compared to unfilled systems. Most notably, the chain-like structures imparted a magneto-sensitive behaviour to the lightweight materials. In fact, foams showed a direct relationship between the foams elastic response and the intensity as well as the shape of the time dependent MF applied during their magneto-elastic characterisation. This magneto-elastic behaviour has been obtained at low MF strength (below 200 kA m‑1).

  5. Lightweight pressure vessels and unitized regenerative fuel cells

    SciTech Connect

    Mitlitsky, F.; Myers, B.; Weisberg, A.H.

    1996-09-06

    Energy storage systems have been designed using lightweight pressure vessels with unitized regenerative fuel cells (URFCs). The vessels provide a means of storing reactant gases required for URFCs; they use lightweight bladder liners that act as inflatable mandrels for composite overwrap and provide a permeation barrier. URFC systems have been designed for zero emission vehicles (ZEVs); they are cost competitive with primary FC powered vehicles that operate on H/air with capacitors or batteries for power peaking and regenerative braking. URFCs are capable of regenerative braking via electrolysis and power peaking using low volume/low pressure accumulated oxygen for supercharging the power stack. URFC ZEVs can be safely and rapidly (<5 min.) refueled using home electrolysis units. Reversible operation of cell membrane catalyst is feasible without significant degradation. Such systems would have a rechargeable specific energy > 400 Wh/kg.

  6. Management of blunt hepatic trauma.

    PubMed

    Letoublon, C; Amariutei, A; Taton, N; Lacaze, L; Abba, J; Risse, O; Arvieux, C

    2016-08-01

    For the last 20 years, nonoperative management (NOM) of blunt hepatic trauma (BHT) has been the initial policy whenever this is possible (80% of cases), i.e., in all cases where the hemodynamic status does not demand emergency laparotomy. NOM relies upon the coexistence of three highly effective treatment modalities: radiology with contrast-enhanced computerized tomography (CT) and hepatic arterial embolization, intensive care surveillance, and finally delayed surgery (DS). DS is not a failure of NOM management but rather an integral part of the surgical strategy. When imposed by hemodynamic instability, the immediate surgical option has seen its effectiveness transformed by development of the concept of abbreviated (damage control) laparotomy and wide application of the method of perihepatic packing (PHP). The effectiveness of these two conservative and cautious strategies for initial management is evidenced by current experience, but the management of secondary events that may arise with the most severe grades of injury must be both rapid and effective. PMID:27519150

  7. Lightweight x-ray optics for future space missions

    NASA Astrophysics Data System (ADS)

    Hudec, Rene; Pina, Ladislav; Inneman, Adolf V.; Ticha, Hana; Brozek, Vlastimil; Zentkova, Maria; Zentko, Anton; Chylek, Tomas

    2003-03-01

    The future X-ray astrophysics space missions require very light-weight but large and precise X-ray mirrors shells. Clearly, developments of innovative techniques and approaches are necessary. We discuss the possible alternative techniques with focus on the technologies and experience available in the Czech Republic. They include light ceramics replication by plasma spraying as well as by CVD and PVD technologies, SiC, thin glass technology, improved electroforming, glossy carbon, as well as glossy metals.

  8. Lightweight armor system and process for producing the same

    DOEpatents

    Chu, Henry S.; Bruck, H. Alan; Strempek, Gary C.; Varacalle, Jr., Dominic J.

    2004-01-20

    A lightweight armor system may comprise a substrate having a graded metal matrix composite layer formed thereon by thermal spray deposition. The graded metal matrix composite layer comprises an increasing volume fraction of ceramic particles imbedded in a decreasing volume fraction of a metal matrix as a function of a thickness of the graded metal matrix composite layer. A ceramic impact layer is affixed to the graded metal matrix composite layer.

  9. UTILIZATION OF LIGHTWEIGHT MATERIALS MADE FROM COAL GASIFICATION SLAGS

    SciTech Connect

    Unknown

    2000-04-24

    The integrated-gasification combined-cycle (IGCC) process is an emerging technology that utilizes coal for power generation and production of chemical feedstocks. However, the process generates large amounts of solid waste, consisting of vitrified ash (slag) and some unconverted carbon. In previous projects, Praxis investigated the utilization of ''as-generated'' slags for a wide variety of applications in road construction, cement and concrete production, agricultural applications, and as a landfill material. From these studies, we found that it would be extremely difficult for ''as-generated'' slag to find large-scale acceptance in the marketplace even at no cost because the materials it could replace were abundantly available at very low cost. It was further determined that the unconverted carbon, or char, in the slag is detrimental to its utilization as sand or fine aggregate. It became apparent that a more promising approach would be to develop a variety of value-added products from slag that meet specific industry requirements. This approach was made feasible by the discovery that slag undergoes expansion and forms a lightweight material when subjected to controlled heating in a kiln at temperatures between 1400 and 1700 F. These results confirmed the potential for using expanded slag as a substitute for conventional lightweight aggregates (LWA). The technology to produce lightweight and ultra-lightweight aggregates (ULWA) from slag was subsequently developed by Praxis with funding from the Electric Power Research Institute (EPRI), Illinois Clean Coal Institute (ICCI), and internal resources. The major objectives of the subject project are to demonstrate the technical and economic viability of commercial production of LWA and ULWA from slag and to test the suitability of these aggregates for, various applications. The project goals are to be accomplished in two phases Phase I, comprising the production of LWA and ULWA from slag at the large pilot scale, and

  10. UTILIZATION OF LIGHTWEIGHT MATERIALS MADE FROM COAL GASIFICATION SLAGS

    SciTech Connect

    1999-03-29

    The integrated-gasification combined-cycle (IGCC) process is an emerging technology that utilizes coal for power generation and production of chemical feedstocks. However, the process generates large amounts of solid waste, consisting of vitrified ash (slag) and some unconverted carbon. In previous projects, Praxis investigated the utilization of ''as-generated'' slags for a wide variety of applications in road construction, cement and concrete production, agricultural applications, and as a landfill material. From these studies, we found that it would be extremely difficult for ''as-generated'' slag to find large-scale acceptance in the marketplace even at no cost because the materials it could replace were abundantly available at very low cost. It was further determined that the unconverted carbon, or char, in the slag is detrimental to its utilization as sand or fine aggregate. It became apparent that a more promising approach would be to develop a variety of value-added products from slag that meet specific industry requirements. This approach was made feasible by the discovery that slag undergoes expansion and forms a lightweight material when subjected to controlled heating in a kiln at temperatures between 1400 and 1700 F. These results confirmed the potential for using expanded slag as a substitute for conventional lightweight aggregates (LWA). The technology to produce lightweight and ultra-lightweight aggregates (ULWA) from slag was subsequently developed by Praxis with funding from the Electric Power Research Institute (EPRI), Illinois Clean Coal Institute (ICCI), and internal resources. The major objectives of the subject project are to demonstrate the technical and economic viability of commercial production of LWA and ULWA from slag and to test the suitability of these aggregates for various applications. The project goals are to be accomplished in two phases: Phase I, comprising the production of LWA and ULWA from slag at the large pilot scale, and

  11. Utilization of lightweight materials made from coal gasification slags

    SciTech Connect

    1999-09-30

    The integrated-gasification combined-cycle (IGCC) process is an emerging technology that utilizes coal for power generation and production of chemical feedstocks. However, the process generates large amounts of solid waste, consisting of vitrified ash (slag) and some unconverted carbon. In previous projects, Praxis investigated the utilization of as-generated slags for a wide variety of applications in road construction, cement and concrete production, agricultural applications, and as a landfill material. From these studies, the authors found that it would be extremely difficult for as-generated slag to find large-scale acceptance in the marketplace even at no cost because the materials it could replace were abundantly available at very low cost. It was further determined that the unconverted carbon, or char, in the slag is detrimental to its utilization as sand or fine aggregate. It became apparent that a more promising approach would be to develop a variety of value-added products from slag that meet specific industry requirements. This approach was made feasible by the discovery that slag undergoes expansion and forms a lightweight material when subjected to controlled heating in a kiln at temperatures between 1,400 and 1,700 F. These results confirmed the potential for using expanded slag as a substitute for conventional lightweight aggregates (LWA). The technology to produce lightweight and ultra-lightweight aggregates (ULWA) from slag was subsequently developed by Praxis with funding from the Electric Power Research Institute (EPRI), Illinois Clean Coal Institute (ICCI), and internal resources. The major objectives of the subject project are to demonstrate the technical and economic viability of commercial production of LWA and ULWA from slag and to test the suitability of these aggregates for various applications. The project goals are to be accomplished in two phases: Phase 1, comprising the production of LWA and ULWA from slag at the large pilot scale

  12. Pelican: Pipeline for Extensible, Lightweight Imaging and CAlibratioN

    NASA Astrophysics Data System (ADS)

    Mort, Benjamin; Dulwich, Fred; Williams, Chris; Salvini, Stefano

    2015-07-01

    Pelican is an efficient, lightweight C++ library for quasi-real time data processing. The library provides a framework to separate the acquisition and processing of data, allowing the scalability and flexibility to fit a number of scenarios. Though its origin was in radio astronomy, processing data as it arrives from a telescope, the framework is sufficiently generic to be useful to any application that requires the efficient processing of incoming data streams.

  13. Lightweight battery electrode and method of making it

    NASA Astrophysics Data System (ADS)

    Ferrando, William A.; Divecha, Amarnath P.

    1994-11-01

    A process is introduced for producing a lightweight electrode grid by exposing a compressed, heated mat of dense graphite fibers to Ni(CO)4 gas wherein the Ni(CO)4 decomposes upon contact with the graphite fibers depositing a nickel metal coating on the graphite fibers which strongly bonds the fibers together to form a compressed mat or grid of nickel metal coated fibers.

  14. Polymer Substrates For Lightweight, Thin-Film Solar Cells

    NASA Technical Reports Server (NTRS)

    Lewis, Carol R.

    1993-01-01

    Substrates survive high deposition temperatures. High-temperature-resistant polymers candidate materials for use as substrates of lightweight, flexible, radiation-resistant solar photovoltaic cells. According to proposal, thin films of copper indium diselenide or cadmium telluride deposited on substrates to serve as active semiconductor layers of cells, parts of photovoltaic power arrays having exceptionally high power-to-weight ratios. Flexibility of cells exploited to make arrays rolled up for storage.

  15. Utilization of sewage sludge in the manufacture of lightweight aggregate.

    PubMed

    Franus, Małgorzata; Barnat-Hunek, Danuta; Wdowin, Magdalena

    2016-01-01

    This paper presents a comprehensive study on the possibility of sewage sludge management in a sintered ceramic material such as a lightweight aggregate. Made from clay and sludge lightweight aggregates were sintered at two temperatures: 1100 °C (name of sample LWA1) and 1150 °C (name of sample LWA2). Physical and mechanical properties indicate that the resulting expanded clay aggregate containing sludge meets the basic requirements for lightweight aggregates. The presence of sludge supports the swelling of the raw material, thereby causing an increase in the porosity of aggregates. The LWA2 has a lower value of bulk particle density (0.414 g/cm(3)), apparent particle density (0.87 g/cm(3)), and dry particle density (2.59 g/cm(3)) than it is in the case of LWA1 where these parameters were as follows: bulk particle density 0.685 g/cm(3), apparent particle density 1.05 g/cm(3), and dry particle density 2.69 g/cm(3). Water absorption and porosity of LWA1 (WA = 14.4 %, P = 60 %) are lower than the LWA2 (WA = 16.2 % and P = 66 %). This is due to the higher heating temperature of granules which make the waste gases, liberating them from the decomposition of organic sewage sludge. The compressive strength of LWA2 aggregate is 4.64 MPa and for LWA1 is 0.79 MPa. Results of leaching tests of heavy metals from examined aggregates have shown that insoluble metal compounds are placed in silicate and aluminosilicate structure of the starting materials (clays and sludges), whereas soluble substances formed crystalline skeleton of the aggregates. The thermal synthesis of lightweight aggregates from clay and sludge mixture is a waste-free method of their development. PMID:26635022

  16. A Lightweight, Precision-Deployable, Optical Bench for High Energy Astrophysics Missions

    NASA Astrophysics Data System (ADS)

    Danner, Rolf; Dailey, D.; Lillie, C.

    2011-09-01

    The small angle of total reflection for X-rays, forcing grazing incidence optics with large collecting areas to long focal lengths, has been a fundamental barrier to the advancement of high-energy astrophysics. Design teams around the world have long recognized that a significant increase in effective area beyond Chandra and XMM-Newton requires either a deployable optical bench or separate X-ray optics and instrument module on formation flying spacecraft. Here, we show that we have in hand the components for a lightweight, precision-deployable optical bench that, through its inherent design features, is the affordable path to the next generation of imaging high-energy astrophysics missions. We present our plans for a full-scale engineering model of a deployable optical bench for Explorer-class missions. We intend to use this test article to raise the technology readiness level (TRL) of the tensegrity truss for a lightweight, precision-deployable optical bench for high-energy astrophysics missions from TRL 3 to TRL 5 through a set of four well-defined technology milestones. The milestones cover the architecture's ability to deploy and control the focal point, characterize the deployed dynamics, determine long-term stability, and verify the stowed load capability. Our plan is based on detailed design and analysis work and the construction of a first prototype by our team. Building on our prior analysis and the high TRL of the architecture components we are ready to move on to the next step. The key elements to do this affordably are two existing, fully characterized, flight-quality, deployable booms. After integrating them into the test article, we will demonstrate that our architecture meets the deployment accuracy, adjustability, and stability requirements. The same test article can be used to further raise the TRL in the future.

  17. Vehicular hydrogen storage using lightweight tanks (regenerative fuel cell systems)

    SciTech Connect

    Mitlitsky, F; Myers, B; Weisberg, A H

    1999-06-01

    Energy storage systems with extremely high specific energy (>400 Wh/kg) have been designed that use lightweight tankage to contain the gases generated by reversible (unitized) regenerative fuel cells (URFCs). Lawrence Livermore National Laboratory (LLNL) will leverage work for aerospace applications supported by other sponsors (including BMDO, NASA, and USAF) to develop URFC systems for transportation and utility applications. Lightweight tankage is important for primary fuel cell powered vehicles that use on-board storage of hydrogen. Lightweight pressure vessels with state-of-the-art performance factors were designed, and prototypes are being fabricated to meet the DOE 2000 goals (4000 Wh/kg, 12% hydrogen by weight, 700 Wh/liter, and $20/kWh in high volume production). These pressure vessels use technologies that are easily adopted by industrial partners. Advanced liners provide permeation barriers for gas storage and are mandrels for composite overwrap. URFCs are important to the efficient use of hydrogen as a transportation fuel and enabler of renewable energy. H{sub 2}/halogen URFCs may be advantageous for stationary applications whereas H{sub 2}/O{sub 2} or H{sub 2}/air URFCs are advantageous for vehicular applications. URFC research and development is required to improve performance (efficiency), reduce catalyst loading, understand engineering operation, and integrate systems. LLNL has the experimental equipment and advanced URFC membrane electrode assemblies (some with reduced catalyst loading) for evaluating commercial hardware (not funded by DOE in FY1999).

  18. Impact of lightweight and conventional jackhammers on the operator.

    PubMed

    Campbell-Kyureghyan, Naira; Singh, Gurjeet; Otieno, Wilkistar; Cooper, Karen

    2012-01-01

    Jackhammer manufacturers have recently developed lightweight (45-60 lbs) jackhammers intended to reduce the required lifting and pushing forces during operation. However, the vibration characteristics of the lightweight jackhammers and their effect on muscle activity are currently unknown. The objective of this study was to compare the measured vibration and muscle activity between: (i) conventional (90 lb) and light weight (60 lb) jackhammers, (ii) different pavement type/thickness combinations, and (iii) pneumatic and hydraulic jackhammers. Five jackhammers were tested on 4 and 6 inch thick asphalt and concrete pavements by four experienced operators. Analysis of the results revealed that both weight classes averaged 9.7 m/s(2) at the 20 Hz weighted 1/3 octave band frequency, and the TLV of daily exposure for either weight class of jackhammer was less than 1.5 hours/per day. There was an approximately 33% difference in vibration measured on the hand of the operators due to pavement thickness, 30% due pavement type, and no difference due to power source. Conventional jackhammers overall produced higher muscle activity than lightweight jackhammers. Although selection of the correct jackhammer for the job involves many factors including pavement type and thickness, the results of this research can be used to assist in selecting the appropriate jackhammer. PMID:22317363

  19. Energy absorption characteristics of lightweight structural member by stacking conditions

    NASA Astrophysics Data System (ADS)

    Choi, Juho; Yang, Yongjun; Hwang, Woochae; Pyeon, Seokbeom; Min, Hanki; Yeo, Ingoo; Yang, Inyoung

    2012-04-01

    The recent trend in vehicle design is aimed at improving crash safety and environmental-friendliness. To solve these issues, the needs for lighter vehicle to limit exhaust gas and improve fuel economy has been requested for environmental-friendliness. Automobile design should be made for reduced weight once the safety of vehicle is maintained. In this study, composite structural members were manufactured using carbon fiber reinforced plastic (CFRP) which are representative lightweight structural materials. Carbon fiber has been researched as alternative to metals for lightweight vehicle and better fuel economy. CFRP is an anisotropic material which is the most widely adapted lightweight structural member because of their inherent design flexibility and high specific strength and stiffness. Also, variation of CFRP interface number is important to increase the energy absorption capacity. In this study, one type of circular shaped composite tube was used, combined with reinforcing foam. The stacking condition was selected to investigate the effect of the fiber orientation angle and interface number. The crashworthy behavior of circular composite material tubes subjected to static axial compression under same conditions is reported. The axial static collapse tests were carried out for each section member. The collapse modes and the energy absorption capability of the members were analyzed.

  20. Energy absorption characteristics of lightweight structural member by stacking conditions

    NASA Astrophysics Data System (ADS)

    Choi, Juho; Yang, Yongjun; Hwang, Woochae; Pyeon, Seokbeom; Min, Hanki; Yeo, Ingoo; Yang, Inyoung

    2011-11-01

    The recent trend in vehicle design is aimed at improving crash safety and environmental-friendliness. To solve these issues, the needs for lighter vehicle to limit exhaust gas and improve fuel economy has been requested for environmental-friendliness. Automobile design should be made for reduced weight once the safety of vehicle is maintained. In this study, composite structural members were manufactured using carbon fiber reinforced plastic (CFRP) which are representative lightweight structural materials. Carbon fiber has been researched as alternative to metals for lightweight vehicle and better fuel economy. CFRP is an anisotropic material which is the most widely adapted lightweight structural member because of their inherent design flexibility and high specific strength and stiffness. Also, variation of CFRP interface number is important to increase the energy absorption capacity. In this study, one type of circular shaped composite tube was used, combined with reinforcing foam. The stacking condition was selected to investigate the effect of the fiber orientation angle and interface number. The crashworthy behavior of circular composite material tubes subjected to static axial compression under same conditions is reported. The axial static collapse tests were carried out for each section member. The collapse modes and the energy absorption capability of the members were analyzed.

  1. Moisture and Thermal Conductivity of Lightweight Block Walls

    NASA Astrophysics Data System (ADS)

    Joosep, R.

    2015-11-01

    This article examines thermal properties of lightweight block walls and their changes over the course of time. Three different types of lightweight blocks and two types of heat insulation are used in construction. Aeroc aerated concrete blocks are in use, as well as compacted LECA (Lightweight Expanded Clay Aggregate) Fibo blocks made from burned clay and Silbet blocks produced from oil shale ash. Expanded Thermisol EPS60F polystyrene plates and glass wool Isover OL-P plates are used for thermal insulation. The actual and computational values of thermal conductivity and the water draining properties of walls over time are compared in this article. Water draining from glass wool walls is relatively fast. Water-draining can take over a year in polystyrene insulated walls. All four wall constructions can be used as external walls, but care must be taken regarding the moisture content of the blocks during construction (the construction should be handled with care to minimise the moisture in the blocks), especially in polystyrene board-insulated walls.

  2. Lightweight nickel electrode for nickel hydrogen cells and batteries

    NASA Technical Reports Server (NTRS)

    Britton, D. L.

    1986-01-01

    The nickel electrode was identified as the heaviest component of the nickel hydrogen (NiH2) battery. The NASA Lewis Research Center is developing nickel electrodes for NiH2 battery devices which will be lighter in weight and have higher energy densities when cycled under a low Earth orbit regime at deep depths of discharge. Lightweight plaques are first exposed to 31 percent potassium hydroxide for 3 months to determine their suitability for use as electrode substrates from a chemical corrosion standpoint. Pore size distribution and porosity of the plaques are then measured. The lightweight plaques examined are nickel foam, nickel felt, nickel plastic and nickel plated graphite. Plaques are then electrochemically impregnated in an aqueous solution. Initial characterization tests of the impregnated plaques are performed at five discharge levels, C/2, 1.0 C, 1.37 C, 2.0C, and 2.74 C rates. Electrodes that passed the initial characterization screening test will be life cycle tested. Lightweight electrodes are approximately 30 to 50 percent lighter in weight than the sintered nickel electrode.

  3. Lightweight nickel electrode for nickel hydrogen cells and batteries

    NASA Technical Reports Server (NTRS)

    Britton, Doris L.

    1986-01-01

    The nickel electrode was identified as the heaviest component of the nickel hydrogen (NiH2) battery. The NASA Lewis Research Center is developing nickel electrodes for NiH2 battery devices which will be lighter in weight and have higher energy densities when cycled under a low Earth orbit regime at deep depths of discharge. Lightweight plaques are first exposed to 31 percent potassium hydroxide for 3 months to determine their suitability for use as electrode substrates from a chemical corrosion standpoint. Pore size distribution and porosity of the plaques are then measured. The lightweight plaques examined are nickel foam, nickel felt, nickel plastic and nickel plated graphite. Plaques are then electrochemically impregnated in an aqueous solution. Initial characterization tests of the impregnated plaques are performed at five discharge levels, C/2, 1.0 C, 1.37 C, 2.0 C, and 2.74 C rates. Electrodes that passed the initial characterization screening test will be life cycle tested. Lightweight electrodes are approximately 30 to 50 percent lighter in weight than the sintered nickel electrode.

  4. Mechanical analysis of lightweight constructions manufactured with fused deposition modeling

    NASA Astrophysics Data System (ADS)

    Bagsik, A.; Josupeit, S.; Schoeppner, V.; Klemp, E.

    2014-05-01

    Additive production techniques have the advantage of manufacturing parts without needing a forming tool. One of the most used additive manufacturing processes is "Fused Deposition Modeling" (FDM) which allows the production of prototypes and end-use parts. Due to the manufacture layer by layer, also complex part geometries can be created in one working step. Furthermore, lightweight parts with specific inner core structures can be manufactured in order to achieve good weightrelated strength properties. In this paper the mechanical behavior of lightweight parts manufactured with the 3D production system Fortus 400mc from Stratasys and the material Polyetherimide (PEI) with the trade name Ultem*9085 is analyzed. The test specimens were built up with different inner structures and building directions. Therefore, test specimens with known lightweight core geometries (e.g. corrugated and honeycomb cores) were designed. A four-point bending test was conducted to analyze the strength properties as well as the weight-related strength properties. Additionally the influence of the structure width, the structure wall thickness and the top layer thickness was analyzed using a honeycomb structure.

  5. Ceramic/polymer functionally graded material (FGM) lightweight armor system

    SciTech Connect

    Petrovic, J.J.; McClellan, K.J.

    1998-12-31

    This is the final report of a two-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Functionally graded material is an enabling technology for lightweight body armor improvements. The objective was to demonstrate the ability to produce functionally graded ceramic-polymer and ceramic-metal lightweight armor materials. This objective involved two aspects. The first and key aspect was the development of graded-porosity boron-carbide ceramic microstructures. The second aspect was the development of techniques for liquid infiltration of lightweight metals and polymers into the graded-porosity ceramic. The authors were successful in synthesizing boron-carbide ceramic microstructures with graded porosity. These graded-porosity boron-carbide hot-pressed pieces were then successfully liquid-infiltrated in vacuum with molten aluminum at 1,300 C, and with liquid polymers at room temperature. Thus, they were able to demonstrate the feasibility of producing boron carbide-aluminum and boron carbide-polymer functionally graded materials.

  6. Hummingbird: Ultra-Lightweight Cryptography for Resource-Constrained Devices

    NASA Astrophysics Data System (ADS)

    Engels, Daniel; Fan, Xinxin; Gong, Guang; Hu, Honggang; Smith, Eric M.

    Due to the tight cost and constrained resources of high-volume consumer devices such as RFID tags, smart cards and wireless sensor nodes, it is desirable to employ lightweight and specialized cryptographic primitives for many security applications. Motivated by the design of the well-known Enigma machine, we present a novel ultra-lightweight cryptographic algorithm, referred to as Hummingbird, for resource-constrained devices in this paper. Hummingbird can provide the designed security with small block size and is resistant to the most common attacks such as linear and differential cryptanalysis. Furthermore, we also present efficient software implementation of Hummingbird on the 8-bit microcontroller ATmega128L from Atmel and the 16-bit microcontroller MSP430 from Texas Instruments, respectively. Our experimental results show that after a system initialization phase Hummingbird can achieve up to 147 and 4.7 times faster throughput for a size-optimized and a speed-optimized implementations, respectively, when compared to the state-of-the-art ultra-lightweight block cipher PRESENT[10] on the similar platforms.

  7. Blunt pancreatic trauma: A persistent diagnostic conundrum?

    PubMed Central

    Kumar, Atin; Panda, Ananya; Gamanagatti, Shivanand

    2016-01-01

    Blunt pancreatic trauma is an uncommon injury but has high morbidity and mortality. In modern era of trauma care, pancreatic trauma remains a persistent challenge to radiologists and surgeons alike. Early detection of pancreatic trauma is essential to prevent subsequent complications. However early pancreatic injury is often subtle on computed tomography (CT) and can be missed unless specifically looked for. Signs of pancreatic injury on CT include laceration, transection, bulky pancreas, heterogeneous enhancement, peripancreatic fluid and signs of pancreatitis. Pan-creatic ductal injury is a vital decision-making parameter as ductal injury is an indication for laparotomy. While lacerations involving more than half of pancreatic parenchyma are suggestive of ductal injury on CT, ductal injuries can be directly assessed on magnetic resonance imaging (MRI) or encoscopic retrograde cholangio-pancreatography. Pancreatic trauma also shows temporal evolution with increase in extent of injury with time. Hence early CT scans may underestimate the extent of injures and sequential imaging with CT or MRI is important in pancreatic trauma. Sequential imaging is also needed for successful non-operative management of pancreatic injury. Accurate early detection on initial CT and adopting a multimodality and sequential imaging strategy can improve outcome in pancreatic trauma. PMID:26981225

  8. Addressing childhood trauma in a developmental context

    PubMed Central

    Gregorowski, Claire; Seedat, Soraya

    2013-01-01

    With the anticipated publication of the DSM-5 in May 2013, much reflection and work has been done on reviewing existing psychiatric nomenclature including, but not limited to the field of traumatic exposure. Traditionally, understanding of the psychiatric and psychological effects of trauma have been developed from studies with adults and then applied to trauma-exposed children with some modifications. While this is an important step to understanding the sequelae of trauma in children and adolescents, the adverse developmental effects of traumatic exposures on the rapidly evolving neurological, physical, social and psychological capacities of children calls for a developmentally sensitive framework for understanding, assessing and treating trauma-exposed children. The importance of early attachment relationships in infancy and childhood means that severely disrupted early caregiving relationships may have far-reaching and lifelong developmental consequences and can therefore be considered traumatic. Given the high rates of violence and trauma exposure of South African children and adolescents, the need for a developmentally based understanding of the effects of trauma on child and adolescent mental health becomes even more pronounced. In this paper, we draw on theoretical perspectives to provide a practical, clinically driven approach to the management of developmental trauma. PMID:25104963

  9. Abusive head trauma: past, present, and future.

    PubMed

    Narang, Sandeep; Clarke, Jennifer

    2014-12-01

    Abusive head trauma has a robust and interesting scientific history. Recently, the American Academy of Pediatrics has endorsed a change in terminology to a term that is more general in describing the vast array of abusive mechanisms that can result in pediatric head injury. Simply defined, abusive head trauma is "child physical abuse that results in injury to the head or brain." Abusive head trauma is a relatively common cause of childhood neurotrauma, with an estimated incidence of 16 to 33 cases per 100,000 children per year in the first 2 years of life. Clinical findings are variable; AHT should be considered in all children with neurologic signs and symptoms, especially if no or only mild trauma is described. Subdural and retinal hemorrhages are the most common findings. The current best evidence-based literature has identified some features--apnea and severe retinal hemorrhages--that reliably discriminate abusive from accidental injury. Longitudinal studies of outcomes in abusive head trauma patients demonstrate that approximately one-third of the children are severely disabled, one third of them are moderately disabled, and one third have no or only mild symptoms. Abusive head trauma cases are complex cases that require a rigorous, multidisciplinary team approach. The clinician can establish this diagnosis with confidence if he/she maintains a high index of suspicion for the diagnosis, has knowledge of the signs, symptoms, and risk factors of abusive head trauma, and reasonably excludes other etiologies on the differential diagnosis. PMID:25316728

  10. Blunt pancreatic trauma: A persistent diagnostic conundrum?

    PubMed

    Kumar, Atin; Panda, Ananya; Gamanagatti, Shivanand

    2016-02-28

    Blunt pancreatic trauma is an uncommon injury but has high morbidity and mortality. In modern era of trauma care, pancreatic trauma remains a persistent challenge to radiologists and surgeons alike. Early detection of pancreatic trauma is essential to prevent subsequent complications. However early pancreatic injury is often subtle on computed tomography (CT) and can be missed unless specifically looked for. Signs of pancreatic injury on CT include laceration, transection, bulky pancreas, heterogeneous enhancement, peripancreatic fluid and signs of pancreatitis. Pan-creatic ductal injury is a vital decision-making parameter as ductal injury is an indication for laparotomy. While lacerations involving more than half of pancreatic parenchyma are suggestive of ductal injury on CT, ductal injuries can be directly assessed on magnetic resonance imaging (MRI) or encoscopic retrograde cholangio-pancreatography. Pancreatic trauma also shows temporal evolution with increase in extent of injury with time. Hence early CT scans may underestimate the extent of injures and sequential imaging with CT or MRI is important in pancreatic trauma. Sequential imaging is also needed for successful non-operative management of pancreatic injury. Accurate early detection on initial CT and adopting a multimodality and sequential imaging strategy can improve outcome in pancreatic trauma. PMID:26981225

  11. Mechanosignaling in Bone Health, Trauma and Inflammation

    PubMed Central

    Knapik, Derrick M.; Perera, Priyangi; Nam, Jin; Blazek, Alisa D.; Rath, Björn; Leblebicioglu, Binnaz; Das, Hiranmoy; Wu, Lai Chu; Hewett, Timothy E.; Agarwal, Suresh K.; Robling, Alexander G.; Flanigan, David C.; Lee, Beth S.

    2014-01-01

    Abstract Significance: Mechanosignaling is vital for maintaining the structural integrity of bone under physiologic conditions. These signals activate and suppress multiple signaling cascades regulating bone formation and resorption. Understanding these pathways is of prime importance to exploit their therapeutic potential in disorders associated with bone loss due to disuse, trauma, or disruption of homeostatic mechanisms. Recent Advances: In the case of cells of the bone, an impressive amount of data has been generated that provides evidence of a complex mechanism by which mechanical signals can maintain or disrupt cellular homeostasis by driving transcriptional regulation of growth factors, matrix proteins and inflammatory mediators in health and inflammation. Mechanical signals act on cells in a magnitude dependent manner to induce bone deposition or resorption. During health, physiological levels of these signals are essential for maintaining bone strength and architecture, whereas during inflammation, similar signals can curb inflammation by suppressing the nuclear factor kappa B (NF-κB) signaling cascade, while upregulating matrix synthesis via mothers against decapentaplegic homolog and/or Wnt signaling cascades. Contrarily, excessive mechanical forces can induce inflammation via activation of the NF-κB signaling cascade. Critical Issues: Given the osteogenic potential of mechanical signals, it is imperative to exploit their therapeutic efficacy for the treatment of bone disorders. Here we review select signaling pathways and mediators stimulated by mechanical signals to modulate the strength and integrity of the bone. Future Directions: Understanding the mechanisms of mechanotransduction and its effects on bone lay the groundwork for development of nonpharmacologic mechanostimulatory approaches for osteodegenerative diseases and optimal bone health. Antioxid. Redox Signal. 20, 970–985. PMID:23815527

  12. Patterns of Errors Contributing to Trauma Mortality

    PubMed Central

    Gruen, Russell L.; Jurkovich, Gregory J.; McIntyre, Lisa K.; Foy, Hugh M.; Maier, Ronald V.

    2006-01-01

    Objective: To identify patterns of errors contributing to inpatient trauma deaths. Methods: All inpatient trauma deaths at a high-volume level I trauma center from 1996 to 2004 inclusive were audited. Data were collected with daily trauma registry chart abstraction, weekly morbidity and mortality reports, hospital quality assurance reports, and annual trauma registry analyses of risk of death using TRISS and HARM methodology. Deaths that met criteria for low to medium probability of mortality or those with quality of care concerns were analyzed for errors and then subjected to 3-stage peer review at weekly departmental, monthly hospital, and annual regional forums. Patterns of errors were constructed from the compiled longitudinal data. Results: In 9 years, there were 44,401 trauma patient admissions and 2594 deaths (5.8%), of which 601 met low to medium mortality risks. Sixty-four patients (0.14% admissions, 2.47% deaths) had recognized errors in care that contributed to their death. Important error patterns included: failure to successfully intubate, secure or protect an airway (16%), delayed operative or angiographic control of acute abdominal/pelvic hemorrhage (16%), delayed intervention for ongoing intrathoracic hemorrhage (9%), inadequate DVT or gastrointestinal prophylaxis (9%), lengthy initial operative procedures rather than damage control surgery in unstable patients (8%), over-resuscitation with fluids (5%), and complications of feeding tubes (5%). Resulting data-directed institutional and regional trauma system policy changes have demonstrably reduced the incidence of associated error-related deaths. Conclusions: Preventable deaths will occur even in mature trauma systems. This review has identified error patterns that are likely common in all trauma systems, and for which policy interventions can be effectively targeted. PMID:16926563

  13. Vascular Radiology in Trauma: A Review

    SciTech Connect

    Nicholson, Anthony A.

    2004-03-15

    It's been 30 years since an endovascular technique to control traumatic hemorrhage was first described. Despite major technical advances in both diagnostic and therapeutic technology, and a great deal of experience since then, endovascular techniques are rarely considered as part of frontline management for vascular trauma. This review considers the literature and calls for better planning and implementation of diagnostic and image=guided therapeutic facilities. Endovascular techniques should be an essential part of vascular trauma management along with endovascular specialists, partners in trauma teams.

  14. Primary Inadequate Management of Dental Trauma

    PubMed Central

    Agrafioti, Anastasia; Tsatsoulis, Ioannis N.; Papanakou-Tzanetaki, Styliani I.

    2016-01-01

    Tooth fractures are common complications due to trauma in the oral cavity. Tooth fragments and foreign bodies may be embedded in soft tissues as a result of dentofacial trauma and go unnoticed in emergency situations. The inadequate management of such cases may lead to complications, such as foreign-body reaction and scarring. This report describes two cases with dental fragments embedded in the lower lip, which went unnoticed until the patients presented later for completely different treatments and emphasizes the importance of clinical and radiographic examination of soft tissues, even in cases that present late for dental trauma management.

  15. Trauma, healing and the reconstruction of truth.

    PubMed

    Mucci, Clara

    2014-03-01

    The author analyzes recent developments in trauma theory, made necessary especially after the massive psychic traumas following World War II and the Shoah. The theories of Freud and Ferenczi are analyzed, especially, their different views of reality and their clinical attitude. When working with survivors of any trauma (from incest to genocide) it is necessary to reconstruct the historical details as carefully as possible, with the appropriate timing. Psychoanalysis is therefore viewed as an ethical and political practice similar to testimony, allowing the reconstruction of truth within the community and interrupting the cycle of the death instinct from one generation to the next. PMID:24603171

  16. Physical Trauma as an Etiological Agent in Mental Retardation.

    ERIC Educational Resources Information Center

    Angle, Carol R., Ed.; Bering, Edgar A., Jr., Ed.

    The conference on Physical Trauma as a Cause of Mental Retardation dealt with two major areas of etiological concern - postnatal and perinatal trauma. Following two introductory statements on the problem of and issues related to mental retardation (MR) after early trauma to the brain, five papers on the epidemiology of head trauma cover…

  17. A National Study of Trauma Level Designation and Renal Trauma Outcomes

    PubMed Central

    Hotaling, James M.; Wang, Jin; Sorensen, Mathew D.; Rivara, Frederick P.; Gore, John L.; Jurkovich, Jerry; McClung, Christopher D.; Wessells, Hunter; Voelzke, Bryan B.

    2012-01-01

    Purpose We examined the initial management of renal trauma and assessed patterns of management based on hospital trauma level designation. Materials and Methods The National Trauma Data Bank is a comprehensive trauma registry with records from hospitals in the United States and Puerto Rico. Renal injuries treated at a member hospital from 2002 to 2007 were identified. We classified initial management as expectant, minimally invasive (angiography, embolization, ureteral stent or nephrostomy) or open surgical management based on ICD-9 procedure codes. The primary outcome was use of secondary therapies. Results Of 3,247,955 trauma injuries in the National Trauma Data Bank 9,002 were renal injuries (0.3%). High grade injuries demonstrated significantly higher rates of definitive success with the first urological intervention at level I trauma centers vs other trauma centers (minimally invasive 52% vs 26%, p <0.001), and were more likely treated successfully with conservative management (89% vs 82%, p <0.001). When adjusting for other known indices of injury severity, and examining low and high grade injuries, level I trauma centers were 90% more likely to offer an initial trial of conservative management (OR 1.90; 95% CI 1.19, 3.05) and had a 30% lower chance of patients requiring multiple procedures (OR 0.70; 95% CI 0.52, 0.95). Conclusions Following multivariate analysis conservative therapy was more common at level I trauma centers despite the patient population being more severely injured. Initial intervention strategies were also more definitive at level I trauma centers, providing additional support for tiered delivery of trauma care. PMID:22177171

  18. Transforming US Army trauma care: an evidence-based review of the trauma literature.

    PubMed

    Remick, Kyle N; Dickerson, James A; Nessen, Shawn C; Rush, Robert M; Beilman, Greg J

    2010-01-01

    The US Army has been charged to transform to meet the demands of current and anticipated near-future combat needs, covering a full spectrum of military operations. The US Army combat trauma care system was created to deliver combat casualty care in a variety of situations and has been adapted to meet the needs of such care in both Operations Enduring Freedom and Iraqi Freedom. Questions related to our current system include the use and positioning of medical evacuation assets, the type of training for our trauma care providers, the positioning of these providers in proximity to the battlefield, and the type of units most suited to the wide variety of medical operations required of today's military medical team. The review was performed to evaluate available information in light of anticipated future needs to ensure preparedness. We reviewed trauma literature regarding the areas of civilian trauma systems, military trauma systems, presurgical trauma care, medical evacuation times, and the medical evacuation system. Among the conclusions drawn from the reviewed data include the following: regional trauma systems improve outcomes in significantly-injured patients; rural trauma care as part of a trauma system yields improved results compared to nontrauma hospitals and comparable results to those at a higher level center; and delivery of advanced trauma life support care has the potential to extend the period of time of safe medical evacuation to surgical capabilities. These lessons are used to discuss components of an improved system of trauma care, flexible for the varied needs of modern battlefield trauma and adaptable to provide support for anticipated future conflicts. PMID:21181650

  19. The incidence, spectrum and outcome of paediatric trauma managed by the Pietermaritzburg Metropolitan Trauma Service

    PubMed Central

    Manchev, V; Bruce, JL; Oosthuizen, GV; Laing, GL

    2015-01-01

    Introduction The Pietermaritzburg Metropolitan Trauma Service (PMTS) has run a systematic quality improvement programme since 2006. A key component included the development and implementation of an effective surveillance system in the form of an electronic surgical registry (ESR). This study used data from the ESR to review the incidence, spectrum and outcome of paediatric trauma in Pietermaritzburg, South Africa. Methods The ESR was reviewed, and all cases of paediatric trauma managed between 1 January 2012 and 30 July 2014 were retrieved for analysis. Results During the study period, 1,041 paediatric trauma patients (724 male, 69.5%) were managed by the PMTS, averaging a monthly admission of 36. The mean age was 10.9 years (standard deviation: 5.4 years). The mechanism of injury (MOI) was blunt trauma in 753 patients (72.3%) and penetrating trauma in 170 (16.3%). Pedestrian vehicle collisions accounted for 21% of cases and motor vehicle collisions for a further 11%. Intentional trauma accounted for 282 patients (27.1%) and self-inflicted trauma for 14 cases (1.3%). Ninety patients admitted to the intensive care unit and fifty-one required high dependency unit admission. There were 17 deaths, equating to an in-hospital mortality rate of 1.7%. A total of 172 children died on the scene of an incident. There were 35 road traffic related deaths, 26 suicides by hanging, 27 deaths from blunt assault and 23 deaths from penetrating assault. The overall mortality rate for paediatric trauma was 18.2%. Conclusions The ESR has proved to be an effective surveillance system and has enabled the accurate quantification of the burden of paediatric trauma in Pietermaritzburg. This has improved our understanding of the mechanisms and patterns of injury, and has identified a high incidence of intentional and penetrating trauma as well as road traffic collisions. These data can be used to guide strategies to reduce the burden of paediatric trauma in our environment. PMID:26263934

  20. The counselor's trauma as counseling motivation: vulnerability or stress inoculation?

    PubMed

    Jenkins, Sharon Rae; Mitchell, Jessica L; Baird, Stephanie; Whitfield, Sarah Roby; Meyer, Heather Lynn

    2011-08-01

    Should counselors with interpersonal trauma histories work with similarly traumatized clients? How does the work affect them? Current research is inconsistent. This study examines 101 sexual assault and domestic violence counselors' recalled motivations for trauma work, their reported subjective personal changes, and their secondary and vicarious trauma symptoms and burnout. Counselors motivated by interpersonal trauma report both more symptoms and positive changes (including dealing with their own trauma). Those seeking personal meaning report becoming more hypervigilant and self-isolating. Those saying they learned from clients rate symptoms lower, suggesting stress inoculation. Supervisors of trauma counselors should facilitate learning from clients separately from processing the counselor's trauma. PMID:20956440

  1. The trauma film paradigm as an experimental psychopathology model of psychological trauma: intrusive memories and beyond.

    PubMed

    James, Ella L; Lau-Zhu, Alex; Clark, Ian A; Visser, Renée M; Hagenaars, Muriel A; Holmes, Emily A

    2016-07-01

    A better understanding of psychological trauma is fundamental to clinical psychology. Following traumatic event(s), a clinically significant number of people develop symptoms, including those of Acute Stress Disorder and/or Post Traumatic Stress Disorder. The trauma film paradigm offers an experimental psychopathology model to study both exposure and reactions to psychological trauma, including the hallmark symptom of intrusive memories. We reviewed 74 articles that have used this paradigm since the earliest review (Holmes & Bourne, 2008) until July 2014. Highlighting the different stages of trauma processing, i.e. pre-, peri- and post-trauma, the studies are divided according to manipulations before, during and after film viewing, for experimental as well as correlational designs. While the majority of studies focussed on the frequency of intrusive memories, other reactions to trauma were also modelled. We discuss the strengths and weaknesses of the trauma film paradigm as an experimental psychopathology model of trauma, consider ethical issues, and suggest future directions. By understanding the basic mechanisms underlying trauma symptom development, we can begin to translate findings from the laboratory to the clinic, test innovative science-driven interventions, and in the future reduce the debilitating effects of psychopathology following stressful and/or traumatic events. PMID:27289421

  2. Trauma-induced insomnia: A novel model for trauma and sleep research.

    PubMed

    Sinha, Smit S

    2016-02-01

    Traumatic events have been increasingly recognized as important precipitants of clinically significant insomnia. Trauma is an extreme form of stressful life event that generates a sustained neurobiological response triggering the onset and maintenance of insomnia. Trauma may disrupt the normal sleep-wake regulatory mechanism by sensitizing the central nervous system's arousal centers, leading to pronounced central and physiological hyperarousal. The central concept of hyperarousal has been linked to both the pathogenesis of insomnia and to the neurobiological changes in the aftermath of traumatic events, and may be a neurobiological commonality underlying trauma and insomnia. This paper presents evidence for trauma-induced insomnia and advances a model of it as an important nosological and neurobiological entity. Trauma-induced insomnia may occur in the absence of full-blown posttraumatic stress disorder (PTSD), and may also be a precursor of subsequent PTSD development. Converging lines of evidence from the neuroscience of insomnia with the neurobiology and psychophysiology of stress, fear, trauma and PTSD will be integrated to advance understanding of the condition. Preclinical and clinical stress and fear paradigms have informed the neurobiological pathways mediating the production of insomnia by trauma. Elucidating the underlying neurobiological substrates can establish novel biological markers to identify persons at risk for the condition, and help optimize treatment of the trauma-insomnia interface. Early identification and treatment of trauma-induced insomnia may prevent the development of PTSD, as well as other important sequelae such as depression, substance dependence, and other medical conditions. PMID:26140870

  3. Popliteal vasculature injuries in paediatric trauma patients.

    PubMed

    Jones, S A; Roberts, D C; Clarke, N M P

    2012-10-01

    Popliteal-artery injuries in the paediatric-trauma patient are uncommon, difficult to diagnose and with prolonged ischaemia lead to substantial complications. We report three cases of popliteal-vasculature injury in paediatric-trauma patients with diverse mechanisms of injury: blunt trauma, penetrating injury and a Salter-Harris I fracture. We present a range of the significant sequelae that can result from paediatric popliteal-artery injury, both physically and psychologically. It is imperative that clinicians have a high index of suspicion when confronted with paediatric patients with trauma around the knee and that popliteal-vasculature injuries are diagnosed early. If insufficiencies are detected, further imaging should be considered, but surgical exploration should not be delayed in the presence of ischaemia. PMID:22776610

  4. [Who is who revisited: spinal trauma].

    PubMed

    Schueller, G

    2010-12-01

    The ideal classification of spinal trauma does not yet exist, primarily because the combination of morphological, biomechanical and clinical parameters in one single nomenclature has proved impossible. For radiologists and surgeons who work closely together, only a few classifications of injury patterns have been shown to be useful enough to provide rapid and stable therapy decisions. Many classifications are too complex to be practical for day-to-day practice, such as the Magerl classification, which has been adopted by the Arbeitsgemeinschaft für Osteosynthesefragen (AO). Not least because of this classification difficulty, eponyms and synonyms are widely used to describe trauma of the spine, comparable to the number of terms used to describe fractures of the upper and lower limbs. The members of trauma teams should be aware of the definitions of these terms as well as the strengths and limitations of the existing classifications of spinal trauma. PMID:20967415

  5. Rural Emergency Medical Services (EMS) and Trauma

    MedlinePlus

    ... completed a verification visit. Are there statistics and data on trauma related deaths and nonfatal injuries treated ... Insurance Institute for Highway Safety and Highway Loss Data Institute’s Urban/Rural Comparison 2013 , characteristics of fatal ...

  6. Nasal trauma: Primary reconstruction with open rhinoplasty.

    PubMed

    Konstantinidis, I; Malliari, H; Metaxas, S

    2011-01-01

    Due to the prominent location of the nose, the most common facial traumas are nasal injuries. Although nasal traumas usually require staged intervention at a later period of time, in selected cases, primary reconstruction can be effective. A 20-year-old man who was referred from the emergency department with nasal trauma is presented. He reported a fall after feeling unsteady, which caused a direct nasal injury. Clinical examination revealed septal fracture with obstruction of the left nasal cavity and deformity of the nasal pyramid (inverted V deformity). The patient also had a complete dissection of the columella skin. Epistaxis was self-limited, and an open rhinoplasty procedure was decided because the trauma occurred 1 h before admission and there was no significant edema. Surgical intervention included septal reconstruction combined with restoration of the nasal pyramid and columella. One month later, the patient had patent nasal airways, and he was satisfied with the aesthetic result. PMID:22942663

  7. Nasal trauma: Primary reconstruction with open rhinoplasty

    PubMed Central

    Konstantinidis, I; Malliari, H; Metaxas, S

    2011-01-01

    Due to the prominent location of the nose, the most common facial traumas are nasal injuries. Although nasal traumas usually require staged intervention at a later period of time, in selected cases, primary reconstruction can be effective. A 20-year-old man who was referred from the emergency department with nasal trauma is presented. He reported a fall after feeling unsteady, which caused a direct nasal injury. Clinical examination revealed septal fracture with obstruction of the left nasal cavity and deformity of the nasal pyramid (inverted V deformity). The patient also had a complete dissection of the columella skin. Epistaxis was self-limited, and an open rhinoplasty procedure was decided because the trauma occurred 1 h before admission and there was no significant edema. Surgical intervention included septal reconstruction combined with restoration of the nasal pyramid and columella. One month later, the patient had patent nasal airways, and he was satisfied with the aesthetic result. PMID:22942663

  8. Anorectal trauma. Medicolegal and forensic aspects.

    PubMed

    Eckert, W G; Katchis, S

    1989-03-01

    A review of both deliberate and accidental anorectal trauma is presented. The mechanisms and types of injuries as well as the complications are discussed. Injuries resulting from sexual assaults are discussed in detail. PMID:2648809

  9. Global access to literature on trauma.

    PubMed

    Noordin, Shahryar; Wright, James G; Howard, Andrew W

    2008-10-01

    The trauma pandemic disproportionately kills and maims citizens of low-income countries although the immediate cause of the trauma is often an industrial export of a high income country, such as a motor vehicle. Addressing the trauma pandemic in low-income countries requires access to relevant research information regarding prevention and treatment of injuries. Such information is also generally produced in high income countries. We explored various means of making scientific information available to low-income country surgeons using the internet. If orthopaedic surgeons want to maximize their global impact, they should focus on writing about trauma questions relevant to their colleagues in low-income countries and ensuring these same colleagues have access to the literature. PMID:18663552

  10. Hardware Removal in Craniomaxillofacial Trauma

    PubMed Central

    Cahill, Thomas J.; Gandhi, Rikesh; Allori, Alexander C.; Marcus, Jeffrey R.; Powers, David; Erdmann, Detlev; Hollenbeck, Scott T.; Levinson, Howard

    2015-01-01

    Background Craniomaxillofacial (CMF) fractures are typically treated with open reduction and internal fixation. Open reduction and internal fixation can be complicated by hardware exposure or infection. The literature often does not differentiate between these 2 entities; so for this study, we have considered all hardware exposures as hardware infections. Approximately 5% of adults with CMF trauma are thought to develop hardware infections. Management consists of either removing the hardware versus leaving it in situ. The optimal approach has not been investigated. Thus, a systematic review of the literature was undertaken and a resultant evidence-based approach to the treatment and management of CMF hardware infections was devised. Materials and Methods A comprehensive search of journal articles was performed in parallel using MEDLINE, Web of Science, and ScienceDirect electronic databases. Keywords and phrases used were maxillofacial injuries; facial bones; wounds and injuries; fracture fixation, internal; wound infection; and infection. Our search yielded 529 articles. To focus on CMF fractures with hardware infections, the full text of English-language articles was reviewed to identify articles focusing on the evaluation and management of infected hardware in CMF trauma. Each article’s reference list was manually reviewed and citation analysis performed to identify articles missed by the search strategy. There were 259 articles that met the full inclusion criteria and form the basis of this systematic review. The articles were rated based on the level of evidence. There were 81 grade II articles included in the meta-analysis. Result Our meta-analysis revealed that 7503 patients were treated with hardware for CMF fractures in the 81 grade II articles. Hardware infection occurred in 510 (6.8%) of these patients. Of those infections, hardware removal occurred in 264 (51.8%) patients; hardware was left in place in 166 (32.6%) patients; and in 80 (15.6%) cases

  11. Classification and management of mild head trauma

    PubMed Central

    Andrade, Almir F; Paiva, Wellingson S; Soares, Matheus S; De Amorim, Robson LO; Tavares, Wagner M; Teixeira, Manoel J

    2011-01-01

    Mild head trauma had been defined in patients with direct impact or deceleration effect admitted with a Glasgow Coma Scale score of 13–15. It is one of the most frequent causes of morbidity in emergency medicine. Although common, several controversies persist about its clinical management. In this paper, we describe the Brazilian guidelines for mild head trauma, based on a critical review of the relevant literature. PMID:21475628

  12. Trauma imaging in the thorax and abdomen

    SciTech Connect

    Rosenberger, A.; Adler, O.

    1987-01-01

    This book thoroughly covers the radiologic diagnosis of traumatic injuries of the thorax and abdomen with special consideration given to the physical principles governing blunt, blast, and penetrating trauma and to the pathophysiology which they cause. The clinical experience forming the major data base for this book is drawn from the Ramban Medical Center in Haifa, Israel, the major trauma center for the Middle East wars.

  13. The development of pneumobilia after blunt trauma

    PubMed Central

    Okan, İsmail; Tali, Servet; Özsoy, Zeki; Deniz, Çağlar; Acu, Berat; Yenidoğan, Erdinç; Kayaoğlu, Hüseyin Ayhan; Şahin, Mustafa

    2016-01-01

    Pneumobilia is the detection of gas within the biliary system. It usually develops after bilioenteric anastomosis, percutaneous or endoscopic biliary interventions, infections and abscesses. The treatment is surgical, especially in cases with no prior interventions to the biliary system. The development of pneumobilia is quite rare after blunt trauma. Therefore, both the diagnosis and management are challenging for surgeons. Herein, we present the diagnosis and conservative management of a patient with pneumobilia after blunt trauma. PMID:27528818

  14. Management of trauma to supporting dental structures.

    PubMed

    Elias, Husam; Baur, Dale A

    2009-10-01

    Teeth, periodontium, and supporting alveolar bone are frequently involved in trauma and account for approximately 15% of all emergency room visits. The cause of the dentoalveolar trauma varies in different demographics but generally results from falls, playground accidents, domestic violence, bicycle accidents, motor vehicle accidents, assaults, altercations, and sports injuries. Dentoalveolar injuries should be considered an emergency situation because successful management of the injury requires proper diagnosis and treatment within a limited time to achieve better outcomes. PMID:19958905

  15. Recent development of fabrication of extreme light-weighted ceramic mirrors

    NASA Astrophysics Data System (ADS)

    Krödel, Matthias; Wächter, Daniel; Stahr, Frank; Soose, Claus P.

    2015-09-01

    This paper will present the recent development achievements of a German SME supply chain to manufacture super light-weighted HB-Cesic® mirrors for IR to visible applications. We will present recent design developments for achieving extreme light-weighted mirror substrates with extremely high stiffness and performance and in the second part the newly established German supply chain for the manufacturing of such extreme light-weighted mirror substrates.

  16. Self-report may underestimate trauma intrusions.

    PubMed

    Takarangi, Melanie K T; Strange, Deryn; Lindsay, D Stephen

    2014-07-01

    Research examining maladaptive responses to trauma routinely relies on spontaneous self-report to index intrusive thoughts, which assumes people accurately recognize and report their intrusive thoughts. However, "mind-wandering" research reveals people are not always meta-aware of their thought content: they often fail to notice shifts in their attention. In two experiments, we exposed subjects to trauma films, then instructed them to report intrusive thoughts during an unrelated reading task. Intermittently, we asked whether they were thinking about the trauma. As expected, subjects often spontaneously reported intrusive thoughts. However, they were also "caught" engaging in unreported trauma-oriented thoughts. The presence and frequency of intermittent probes did not influence self-caught intrusions. Both self-caught and probe-caught intrusions were related to an existing tendency toward intrusive cognition, film-related distress, and thought suppression attempts. Our data suggest people may lack meta-awareness of trauma-related thoughts, which has implications for theory, research and treatment relating to trauma-related psychopathology. PMID:24993526

  17. Demystifying damage control in musculoskeletal trauma.

    PubMed

    Bates, P; Parker, P; McFadyen, I; Pallister, I

    2016-05-01

    Trauma care has evolved rapidly over the past decade. The benefits of operative fracture management in major trauma patients are well recognised. Concerns over early total care arose when applied broadly. The burden of additional surgical trauma could constitute a second hit, fuelling the inflammatory response and precipitating a decline into acute respiratory distress syndrome, sepsis and multiple organ dysfunction syndrome. Temporary external fixation aimed to deliver the benefits of fracture stabilisation without the risk of major surgery. This damage control orthopaedics approach was advocated for those in extremis and a poorly defined borderline group. An increasing understanding of the physiological response to major trauma means there is now a need to refine our treatment options. A number of large scale retrospective reviews indicate that early definitive fracture fixation is beneficial in the majority of major trauma patients. It is recommended that patients are selected appropriately on the basis of their response to resuscitation. The hope is that this approach (dubbed 'safe definitive fracture surgery' or 'early appropriate care') will herald an era when care is individualised for each patient and their circumstances. The novel Damage Control in Orthopaedic Trauma Surgery course at The Royal College of Surgeons of England aims to equip senior surgeons with the insights and mindset necessary to contribute to this key decision making process as well as also the technical skills to provide damage control interventions when needed, relying on the improved techniques of damage control resuscitation and advances in the understanding of early appropriate care. PMID:27023640

  18. Trauma management: Chernobyl in Belarus and Ukraine.

    PubMed

    Zhukova, Ekatherina

    2016-06-01

    Although the Chernobyl nuclear disaster happened in the Soviet Union in 1986, we still do not know how the most affected states - Ukraine and Belarus - have managed this tragedy since independence. Drawing on the concept of cultural trauma, this article compares Chernobyl narratives in Belarus and Ukraine over the past 28 years. It shows that national narratives of Chernobyl differ, representing the varying ways in which the state overcomes trauma. Our understanding of post-communist transformations can be improved by analysing trauma management narratives and their importance for new national identity construction. These narratives also bring new insights to our vision of cultural trauma by linking it to ontological insecurity. The article demonstrates how the state can become an arena of trauma process as it commands material and symbolic resources to deal with trauma. In general, it contributes to a better understanding of how the same traumatic event can become a source of solidarity in one community, but a source of hostility in another. PMID:27191056

  19. Properties and hydration products of lightweight and expansive cements. Part I: Physical and mechanical properties

    SciTech Connect

    Lilkov, V.; Djabarov, N.; Bechev, G.; Kolev, K.

    1999-10-01

    Results from studies on the physical and mechanical properties of lightweight and expansive cements cured at 20 and 75 C are presented. Lightweight additive (cenospheres from thermoelectric power station Bobov Dol, Bulgaria) and expansive additive (Bulexa with hydroxide type of expansion) were used. The compressive and flexural strength, the gas and water impermeability, and the pore structure of the cement stone of lightweight and expansive cements were investigated. The results are compared with corresponding parameters of cement stone without additives. It was found that the cenospheres are appropriate lightweight additives. The use of expansive additive helps overcome the dry shrinkage of cement stone and strengthens the bond with the bounding surfaces.

  20. "Stuttering" after minor head trauma.

    PubMed

    Strasberg, Stephen; Johnson, Elizabeth J; Parry, Thomas

    2016-03-01

    Traumatic brain injury (TBI) is defined as impairment in brain function as a result of mechanical force. It is classified based on clinical findings using the Glasgow Coma Scale (GCS). Mild TBI is defined as GCS 14-15; moderate, 9-13; and severe, 3-8. Patients with the same TBI classification may have very different underlying pathology. In moderate to severe TBI, the primary pathology may include contusions, hemorrhage, diffuse axonal injury, direct cellular damage, "tearing and shearing of the tissues, loss of the blood-brain barrier, disruption of the neurochemical homeostasis and loss of the electrochemical function". Although the primary pathology associated with mild TBI may be milder versions of the same pathology associated with moderate and severe TBI, it is generally a metabolic injury. However, it is reported that 15% of patients with mild TBI and a GCS score of 14 or 15 will have an intracranial lesion; less than 1% of these require neurosurgical intervention. Although patients with mild TBI may have intracranial lesions, it is rare that the presenting and only physical examination finding is an isolated neurologic finding. Here we present a case of isolated head trauma with a single physical examination finding--expressive aphasia. PMID:26371830