Science.gov

Sample records for linacs

  1. Summary of Linac Group discussions

    SciTech Connect

    Schaffer, G.

    1989-01-01

    This paper discusses upgrading of the LAMPF I linac. Particular topics discussed are: sources of and cures for linac beam halos, ion source, RFQ, chopper and drift-tube linac, cavity-coupled linac, superconducting linac structure, new rf power sources, EHF linac design, and cost projections. (LSP)

  2. The RIA driver linac.

    SciTech Connect

    Shepard, K. W.

    2002-09-23

    The driver linac for the U.S. RIA project will be a 1.4 GV superconducting linac capable of accelerating the full mass range of ions from 900 MeV protons to 400 MeV/u uranium, and delivering a cw beam of 400 kW shared by at least two targets simultaneously. Elements of the linac are being developed at several U.S. laboratories. The current status of linac design and development is reviewed with emphasis on changes in the baseline design since the last linac conference.

  3. Magnet innovations for linacs

    SciTech Connect

    Halbach, K.

    1986-06-01

    It is possible to produce large magnetic fields at the aperture of permanent magnet quadrupoles, even when the magnetic aperture is very small. That, combined with their compactness, makes permanent magnet quadrupoles very powerful components of small aperture linacs. Results will be presented about past and present work on both fixed and variable strength permanent magnets suitable for use in and around linacs.

  4. CSNS LINAC DESIGN

    SciTech Connect

    FU, S.; FANG, S.; WEI, J.

    2006-08-21

    China Spallation Neutron Source has been approved in principle by the Chinese government. CSNS can provide a beam power of 100kW on the target in the first phase, and then 200kW in the second phase. The accelerator complex of CSNS consists of an H- linac of 81MeV and a rapid cycling synchrotron of 1.6GeV at 25Hz repetition rate. In the second phase, the linac energy will be upgraded to 132MeV and the average current will be doubled. The linac has been designed, and some R&D studies have started under the support from Chinese Academy of Sciences. The linac comprises a H- ion source, an RFQ and a conventional DTL with EMQs. This paper will present our major design results and some progresses in the R&D of the linac.

  5. Review of induction LINACS

    SciTech Connect

    Faltens, A.; Keefe, D.

    1981-10-01

    There has been a recent upsurge of activity in the field of induction linacs, with several new machines becoming operational and others in the design stages. The performance levels of electron machines have reached 10's of kiloamps of current and will soon reach 10's of MeV's of energy. Acceleration of ion current has been demonstrated, and the study of a 10 GeV heavy ion induction linac for ICF continues. The operating principles of induction linacs are reviewed with the emphasis on design choices which are important for increasing the maximum beam currents.

  6. SSC linac injector

    SciTech Connect

    Bhatia, T.S.; Guy, F.W.; Neuschaefer, G.H.; Pabst, M.; Schriber, S.O.; Stovall, J.E.; Wangler, T.P.; Wilson, M.T.; Worth, G.T.

    1988-01-01

    The parameters for the proposed SSC linac injector system are obtained from the established requirements of the low-energy booster (LEB). The first element of this injector system is a radio-frequency quadrupole (RFQ) that bunches the H/sup /minus// ions and accelerates these ion bunches to 2.5 MeV. With a suitable matching section, this beam is injected into a drift-tube linac (DTL), which takes the ions to 120 MeV. The final element is a coupled-cavity linac (CCL) designed to accelerate the H/sup /minus// ions to 600 MeV for injection into the LEB. The conceptual beam dynamics design for the various elements of this linac injector system are described. 4 refs., 5 figs., 4 tabs.

  7. Progress in Induction Linacs

    SciTech Connect

    Caporaso, G J

    2000-09-27

    This presentation will be a broad survey of progress in induction technology over the past four years. Much work has been done on accelerators for hydrodynamic test radiography and other applications. Solid-state pulsers have been developed which can provide unprecedented flexibility and precision in pulse format and accelerating voltage for both ion and electron induction machines. Induction linacs can now be built which can operate with MHz repetition rates. Solid-state technology has also made possible the development of fast kickers for precision control of high current beams. New insulator technology has been developed which will improve conventional induction linacs in addition to enabling a new class of high gradient induction linacs.

  8. Special SLC linac developments

    SciTech Connect

    Seeman, J.T.; Sheppard, J.C.

    1986-04-01

    The linac of the SLAC Linear Collider (SLC) is required to accelerate several intense electron and positron bunches to high energy while maintaining their small transverse dimensions and energy spectra. Many of the linac systems have been upgraded to the new stringent SLC design criteria. The remaining systems will be completed in the summer of 1986. Special instruments and controls have been developed to monitor and manipulate these small but potent beams. A brief review of the SLC requirements is given. A broad survey of the recent development is made encompassing longitudinal and transverse wakefield reductions, Landau damping, energy and position feedback systems, beam diagnostic and beam current fluctuations.

  9. Recirculated and Energy Recovered Linacs

    SciTech Connect

    Geoffrey Krafft

    2003-05-01

    Linacs that are recirculated share many characteristics with ordinary linacs, including the ability to accelerate electron beams from an injector to high energy with relatively little (normalized) emittance growth and the ability to deliver ultrashort bunch duration pulses to users. When such linacs are energy recovered, the additional possibility of accelerating very high average beam current arises. Because this combination of beam properties is not possible from either a conventional linac, or from storage rings where emittance and pulse length are set by the equilibrium between radiation damping and quantum excitation of oscillations about the closed orbit, energy recovered linacs are being considered for an increasing variety of applications. These possibilities extend from high power free-electron lasers and recirculated linac light sources, to electron coolers for high energy colliders or actual electron-ion colliding- beam machines based on an energy recovered linac for the electrons.

  10. Space charge in proton linacs

    SciTech Connect

    Wangler, T.P.; Merrill, F.; Rybarcyk, L.; Ryne, R.

    1998-12-31

    There are at least two reasons for the interest in space-charge effects in proton linacs. First, it can be expected that there are some areas of commonality in the space-charge physics of linacs and circular machines. Second, a linac delivers the input beam to a circular machine, so understanding the linac physics helps to explain the limitations for the input beam quality to a ring. This presentation is divided into three parts. First, the authors discuss space-charge effects form the linac point of view. Second, they discuss practical methods of calculation of linac beam dynamics that include space-charge forces. Finally, they summarize the status of experimental studies of the beam performance in the LANSCE linac including space-charge effects.

  11. Superconducting linacs: some recent developments

    SciTech Connect

    Bollinger, L.M.

    1985-01-01

    The paper is a review of superconducting linacs that are of interest for heavy-ion acceleration. Most of the paper is concerned with energy boosters for projectiles from tandem electrostatic accelerators, the only application for which superconducting linacs are now used for heavy-ion acceleration. There is also a brief discussion of the concept of a superconducting injector linac being developed as a replacement of the tandem in a multi-stage acceleration system. Throughout, the emphasis is on the technology of the superconducting linac, including some attention to the relationships between resonator design parameters and accelerator performance characteristics. 21 refs., 14 figs., 3 tabs.

  12. Compact LINAC for deuterons

    SciTech Connect

    Kurennoy, S S; O' Hara, J F; Rybarcyk, L J

    2008-01-01

    We are developing a compact deuteron-beam accelerator up to the deuteron energy of a few MeV based on room-temperature inter-digital H-mode (IH) accelerating structures with the transverse beam focusing using permanent-magnet quadrupoles (PMQ). Combining electromagnetic 3-D modeling with beam dynamics simulations and thermal-stress analysis, we show that IHPMQ structures provide very efficient and practical accelerators for light-ion beams of considerable currents at the beam velocities around a few percent of the speed of light. IH-structures with PMQ focusing following a short RFQ can also be beneficial in the front end of ion linacs.

  13. Energy Recovery Linacs

    SciTech Connect

    Nikolitsa Merminga

    2007-06-01

    The success and continuing progress of the three operating FELs based on Energy Recovery Linacs (ERLs), the Jefferson Lab IR FEL Upgrade, the Japan Atomic Energy Agency (JAEA) FEL, and the Novosibirsk High Power THz FEL, have inspired multiple future applications of ERLs, which include higher power FELs, synchrotron radiation sources, electron cooling devices, and high luminosity electron-ion colliders. The benefits of using ERLs for these applications are presented. The key accelerator physics and technology challenges of realizing future ERL designs, and recent developments towards resolving these challenges are reviewed.

  14. New medical linacs

    NASA Astrophysics Data System (ADS)

    Schonberg, R. G.; Mishin, A. V.

    1997-02-01

    X-band linacs designed and manufactured by Schonberg Research Corporation that are currently used by two spin-off companies for radiation therapy systems. Accuray employs a basic 6 MeV design with 300 R/min nominal dose rate at 80 cm from a tungsten target. The designed stereoscopic radiosurgery system is known as the Cyberknife. The Cyberknife combines a treatment planning, imaging and treatment delivery features. The treatment delivery system enclosure incorporates an accelerator head, RF components, pulse transformer and electronics mounted on a robotic arm. Intraop Medical, Inc. has introduced a system for intraoperative radiation therapy (IORT) called Mobetron (Mobile Electron Beam Intraoperative Treatment System). Mobetron is based on a 12 MeV two section X-band linac also designed by Schonberg Research Corporation. The accelerator design permits smooth energy variation from 4 to 12 MeV, but will be used at 4 specific energies. A self-shielded concept is applied to the system design. It will be used in conventional operating rooms without added shielding.

  15. Optimization of SRF Linacs

    SciTech Connect

    Powers, Tom

    2013-09-01

    This work describes preliminary results of a new software tool that allows one to vary parameters and understand the effects on the optimized costs of construction plus 10 year operations of an SRF linac, the associated cryogenic facility, and controls, where operations includes the cost of the electrical utilities but not the labor or other costs. It derives from collaborative work done with staff from Accelerator Science and Technology Centre, Daresbury, UK several years ago while they were in the process of developing a conceptual design for the New Light Source project.[1] The initial goal was to convert a spread sheet format to a graphical interface to allow the ability to sweep different parameter sets. The tools also allow one to compare the cost of the different facets of the machine design and operations so as to better understand the tradeoffs. The work was first published in an ICFA Beam Dynamics News Letter.[2] More recent additions to the software include the ability to save and restore input parameters as well as to adjust the Qo versus E parameters in order to explore the potential costs savings associated with doing so. Additionally, program changes now allow one to model the costs associated with a linac that makes use of energy recovery mode of operation.

  16. Low-charge-state linac

    SciTech Connect

    Shepard, K.W.; Kim, J.W.

    1995-08-01

    A design is being developed for a low-charge-state linac suitable for injecting ATLAS with a low-charge-state, radioactive beam. Initial work indicates that the existing ATLAS interdigital superconducting accelerating structures, together with the superconducting quadrupole transverse focussing element discussed above, provides a basis for a high-performance low-charge-state linac. The initial 2 or 3 MV of such a linac could be based on a normally-conducting, low-frequency RFQ, possibly combined with 24-MHz superconducting interdigital structures. Beam dynamics studies of the whole low-charge-state post-accelerator section were carried out in early FY 1995.

  17. Space charge in proton linacs

    SciTech Connect

    Wangler, T. P.; Merrill, F.; Rybarcyk, L.; Ryne, R.

    1998-11-05

    Space charge effects on beam dynamics in linear accelerators are discussed. Practical linac beam dynamics calculation methods which include space charge effects are discussed. Also, the status of beam performance experiments including space charge studies are summarized.

  18. SLAC Linac Preparations for FACET

    SciTech Connect

    Erickson, R.; Bentson, L.; Kharakh, D.; Owens, A.; Schuh, P.; Seeman, J.; Sheppard, J.C.; Stanek, M.; Wittmer, W.; Yocky, G.; Wienands, U.; /SLAC

    2011-02-07

    The SLAC 3km linear electron accelerator has been cut at the two-thirds point to provide beams to two independent programs. The last third provides the electron beam for the Linac Coherent Light Source (LCLS), leaving the first two-thirds available for FACET, the new experimental facility for accelerator science and test beams. In this paper, we describe this separation and projects to prepare the linac for the FACET experimental program.

  19. Induction Linac Pulsers

    SciTech Connect

    Faltens, Andris

    2011-01-07

    The pulsers used in most of the induction linacs evolved from the very large body of work that was done in the U.S. and Great Britain during the development of the pulsed magnetron for radar. The radar modulators started at {approx}100 kW and reached >10 MW by 1945. A typical pulse length was 1 {mu}s at a repetition rate of 1,000 pps. A very comprehensive account of the modulator development is Pulse Generators by Lebacqz and Glasoe, one of the Radiation Laboratory Series. There are many permutations of possible modulators, two of the choices being tube type and line type. In earlier notes I wrote that technically the vacuum tube pulser met all of our induction linac needs, in the sense that a number of tubes, in series and parallel if required, could produce our pulses, regulate their voltage, be useable in feed-forward correctors, and provide a low source impedance. At a lower speed, an FET array is similar, and we have obtained and tested a large array capable of >10 MW switching. A modulator with an electronically controlled output only needs a capacitor for energy storage and in a switched mode can transfer the energy from the capacitor to the load at high efficiency. Driving a full size Astron induction core and a simulated resistive 'beam load' we achieved >50% efficiency. These electronically controlled output pulses can produce the pulses we desire but are not used because of their high cost. The second choice, the line type pulser, visually comprises a closing switch and a distributed or a lumped element transmission line. The typical switch cannot open or stop conducting after the desired pulse has been produced, and consequently all of the initially stored energy is dissipated. This approximately halves the efficiency, and the original cost estimating program LIACEP used this factor of two, even though our circuits are usually worse, and even though our inveterate optimists often omit it. The 'missing' energy is that which is reflected back into the

  20. Lattice Design for the LHEC Recirculating Linac

    SciTech Connect

    Sun, Yipeng; Eide, Anders; Zimmermann, Frank; Adolphsen, Chris; /SLAC

    2011-05-20

    In this paper, we present a lattice design for the Large Hadron Electron Collider (LHeC) recirculating linac. The recirculating linac consists of one roughly 3-km long linac hosting superconducting RF (SRF) accelerating cavities, two arcs and one transfer line for the recirculation. In two passes through a pulsed SRF linac the electron beam can get a maximum energy of 140 GeV. Alternatively, in the Energy Recovery Linac (ERL) option the beam passes through a CW linac four times (two passes for acceleration and two for deceleration) for a maximum energy of 60 GeV.

  1. LINACS FOR FUTURE MUON FACILITIES

    SciTech Connect

    Slawomir Bogacz, Rolland Johnson

    2008-10-01

    Future Muon Colliders (MC) and Neutrino Factories (NF) based on muon storage rings will require innovative linacs to: produce the muons, cool them, compress longi-tudinally and ‘shape’ them into a beam and finally to rap-idly accelerate them to multi-GeV (NF) and TeV (MC) energies. Each of these four linac applications has new requirements and opportunities that follow from the na-ture of the muon in that it has a short lifetime (τ = 2.2 μsec) in its own rest frame, it is produced in a tertiary process into a large emittance, and its electron, photon, and neutrino decay products can be more than an annoy-ance. As an example, for optimum performance, the linac repetition rates should scale inversely with the laboratory lifetime of the muon in its storage ring, something as high as 1 kHz for a 40 GeV Neutrino Factory or as low as 20 Hz for a 5 TeV Muon Collider. A superconducting 8 GeV Linac capable of CW operation is being studied as a ver-satile option for muon production [1] for colliders, facto-ries, and muon beams for diverse purposes. A linac filled with high pressure hydrogen gas and imbedded in strong magnetic fields has been proposed to rapidly cool muon beams [2]. Recirculating Linear Accelerators (RLA) are possible because muons do not generate significant syn-chrotron radiation even at extremely high energy and in strong magnetic fields. We will describe the present status of linacs for muon applications; in particular the longitu-dinal bunch compression in a single pass linac and multi-pass acceleration in the RLA, especially the optics and technical requirements for RLA designs, using supercon-ducting RF cavities capable of simultaneous acceleration of both μ+ and μ- species, with pulsed linac quadrupoles to allow the maximum number of passes. The design will include the optics for the multi-pass linac and droplet-shaped return arcs.

  2. Commissioning of the LCLS LINAC

    SciTech Connect

    Loos, H.; Akre, R.; Brachmann, A.; Decker, F.-J.; Ding, Y.; Dowell, D.; Emma, P.; Frisch, J.; Gilevich, S.; Hays, G.; Hering, Ph.; Huang, Z.; Iverson, R.; Limborg-Deprey, C.; Miahnahri, A.; Molloy, S.; Nuhn, H.-D.; Turner, J.; Welch, J.; White, W.; Wu, J.; /SLAC /Stanford U., Appl. Phys. Dept.

    2010-06-11

    The Linac Coherent Light Source (LCLS) X-ray free electron laser project is currently under construction at the Stanford Linear Accelerator Center (SLAC). A new injector and upgrades to the existing accelerator were installed in two phases in 2006 and 2007. We report on the commissioning of the injector, the two new bunch compressors at 250MeV and 4.3 GeV, and transverse and longitudinal beam diagnostics up to the end of the existing linac at 13.6 GeV. The commissioning of the new transfer line from the end of the linac to the undulator is scheduled to start in November 2008 and for the undulator in March 2009 with first light to be expected in July 2009.

  3. IMPACT simulation and the SNS linac beam

    SciTech Connect

    Zhang, Y.; Qiang, J.

    2008-09-03

    Multi-particle tracking simulations for the SNS linac beam dynamics studies are performed with the IMPACT code. Beam measurement results are compared with the computer simulations, including beam longitudinal halo and beam losses in the superconducting linac, transverse beam Courant-Snyder parameters and the longitudinal beam emittance in the linac. In most cases, the simulations show good agreement with the measured results.

  4. Linac Energy Management for LCLS

    SciTech Connect

    Chu, Chungming; Iverson, Richard; Krejcik, Patrick; Rogind, Deborah; White, Greg; Woodley, Mark; /SLAC

    2012-07-05

    Linac Energy Management (LEM) is a control system program that scales magnet field set-point settings following a change in beam energy. LEM is necessary because changes in the number, phase, and amplitude of the active klystrons change the beam's rigidity, and therefore, to maintain constant optics, one has to change focusing gradients and bend fields accordingly. This paper describes the basic process, the control system application programs we developed for LEM, and some of the implementation lessons learned at the Linac Coherent Light Source (LCLS).

  5. Intrabeam stripping in H- Linacs

    SciTech Connect

    Lebedev, V.; Solyak, N.; Ostigy, J.-F.; Alexandrov, A.; Shishlo, A.; /Oak Ridge

    2010-09-01

    A beam loss in the superconducting part of the SNS linac has been observed during its commissioning and operation. Although the loss does not prevent the SNS high power operation, it results in an almost uniform irradiation of linac components and increased radiation levels in the tunnel. Multi-particle tracking could neither account for the magnitude of the observed loss nor its dependence on machine parameters. It was recently found that the loss is consistent with the intrabeam particle collisions resulting in stripping of H{sup -} ions. The paper describes experimental observations and corresponding analytical estimates of the intrabeam stripping.

  6. The Linac Coherent Light Source

    SciTech Connect

    White, William E.; Robert, Aymeric; Dunne, Mike

    2015-04-21

    The Linac Coherent Light Source (LCLS) at the SLAC National Accelerator Laboratory was the first hard X-ray free-electron laser (FEL) to operate as a user facility. After five years of operation, LCLS is now a mature FEL user facility. Our personal views about opportunities and challenges inherent to these unique light sources are discussed.

  7. The Linac Coherent Light Source

    PubMed Central

    White, William E.; Robert, Aymeric; Dunne, Mike

    2015-01-01

    The Linac Coherent Light Source (LCLS) at the SLAC National Accelerator Laboratory was the first hard X-ray free-electron laser (FEL) to operate as a user facility. After five years of operation, LCLS is now a mature FEL user facility. Our personal views about opportunities and challenges inherent to these unique light sources are discussed. PMID:25931055

  8. The Linac Coherent Light Source

    DOE PAGESBeta

    White, William E.; Robert, Aymeric; Dunne, Mike

    2015-05-01

    The Linac Coherent Light Source (LCLS) at the SLAC National Accelerator Laboratory was the first hard X-ray free-electron laser (FEL) to operate as a user facility. After five years of operation, LCLS is now a mature FEL user facility. Our personal views about opportunities and challenges inherent to these unique light sources are discussed.

  9. Space charge in proton linacs

    SciTech Connect

    Wangler, T.P.; Merrill, F.; Rybarcyk, L.; Ryne, R.

    1998-11-01

    Space charge effects on beam dynamics in linear accelerators are discussed. Practical linac beam dynamics calculation methods which include space charge effects are discussed. Also, the status of beam performance experiments including space charge studies are summarized. {copyright} {ital 1998 American Institute of Physics.}

  10. PROGRESS IN DESIGN OF THE SNS LINAC

    SciTech Connect

    R. HARDEKOPF

    2000-11-01

    The Spallation Neutron Source (SNS) is a six-laboratory collaboration to build an intense pulsed neutron facility at Oak Ridge, TN. The linac design has evolved from the conceptual design presented in 1997 to achieve higher initial performance and to incorporate desirable upgrade features. The linac will initially produce 2-MW beam power using a combination of radio-frequency quadruple (RFQ) linac, drift-tube linac (DTL), coupled-cavity linac (CCL), and superconducting-cavity linac (SCL). Designs of each of these elements support the high peak intensity and high quality beam required for injection into the SNS accumulator ring. This paper will trace the evolution of the linac design, the cost and performance factors that drove architecture decisions, and the progress made in the R&D program.

  11. ESS SC Linac Design Overview

    NASA Astrophysics Data System (ADS)

    Ferdinand, Robin

    2002-12-01

    The ESS project (European Spallation Source) aims to produce high power beams for condensed matter studies. One option consists in having both H+ and H- beams. They have to be accelerated and guided to the different spallation targets. Beam power up to 5 MW at 50 Hz plus 5 MW at 16.2/3 Hz, will be delivered on respectively the Short Pulse Target Station and the Long Pulse Target Station. Two 50 mA H- branches are funnelled with one 100 mA H+ beam at around 20 MeV. A chopper line between two RFQs and DTLs constitutes the H- front end. The H+ front end is composed of one RFQ and one DTL. After the funnel, the two species are transported through the same linac up to 1.334 GeV. This common part is composed of a SDTL and a CCL from 20 to 185 MeV and followed by a SuperConducting Linac (SCL) to reach the final energy. Up to recently (ESS Volume III 1996), a NC version of the linac had been extensively studied and constituted the reference option. However, given the fantastic progresses made on SC technology and the many potential advantages, a SC alternative was developed. We concentrate on this option.

  12. LFSC - Linac Feedback Simulation Code

    SciTech Connect

    Ivanov, Valentin; /Fermilab

    2008-05-01

    The computer program LFSC (<Linac Feedback Simulation Code>) is a numerical tool for simulation beam based feedback in high performance linacs. The code LFSC is based on the earlier version developed by a collective of authors at SLAC (L.Hendrickson, R. McEwen, T. Himel, H. Shoaee, S. Shah, P. Emma, P. Schultz) during 1990-2005. That code was successively used in simulation of SLC, TESLA, CLIC and NLC projects. It can simulate as pulse-to-pulse feedback on timescale corresponding to 5-100 Hz, as slower feedbacks, operating in the 0.1-1 Hz range in the Main Linac and Beam Delivery System. The code LFSC is running under Matlab for MS Windows operating system. It contains about 30,000 lines of source code in more than 260 subroutines. The code uses the LIAR ('Linear Accelerator Research code') for particle tracking under ground motion and technical noise perturbations. It uses the Guinea Pig code to simulate the luminosity performance. A set of input files includes the lattice description (XSIF format), and plane text files with numerical parameters, wake fields, ground motion data etc. The Matlab environment provides a flexible system for graphical output.

  13. Wakefields in SLAC linac collimators

    NASA Astrophysics Data System (ADS)

    Novokhatski, A.; Decker, F.-J.; Smith, H.; Sullivan, M.

    2014-12-01

    When a beam travels near collimator jaws, it gets an energy loss and a transverse kick due to the backreaction of the beam field diffracted from the jaws. The effect becomes very important for an intense short bunch when a tight collimation of the background beam halo is required. In the Linac Coherent Light Source at SLAC a collimation system is used to protect the undulators from radiation due to particles in the beam halo. The halo is most likely formed from gun dark current or dark current in some of the accelerating sections. However, collimators are also responsible for the generation of wake fields. The wake field effect from the collimators not only brings an additional energy jitter and change in the trajectory of the beam, but it also rotates the beam on the phase plane, which consequently leads to a degradation of the performance of the Free Electron Laser at the Linac Coherent Light Source. In this paper, we describe a model of the wake field radiation in the SLAC linac collimators. We use the results of a numerical simulation to illustrate the model. Based on the model, we derive simple formulas for the bunch energy loss and the average kick. We also present results from experimental measurements that confirm our model.

  14. BEAM DYNAMICS ISSUES IN THE SNS LINAC

    SciTech Connect

    Shishlo, Andrei P

    2011-01-01

    A review of the Spallation Neutron Source (SNS) linac beam dynamics is presented. It describes transverse and longitudinal beam optics, losses, activation, and comparison between the initial design and the existing accelerator. The SNS linac consists of normal conducting and superconducting parts. The peculiarities in operations with the superconducting part of the SNS linac (SCL), estimations of total losses in SCL, the possible mechanisms of these losses, and the progress in the transverse matching are discussed.

  15. Status of the Linac Coherent Light Source

    SciTech Connect

    Galayda, John N.; /SLAC

    2011-11-04

    The Linac Coherent Light Source (LCLS) is a free electron laser facility in construction at Stanford Linear Accelerator Center. It is designed to operate in the wavelength range 0.15-1.5 nanometers. At the time of this conference, civil construction of new tunnels and buildings is complete, the necessary modifications to the SLAC linac are complete, and the undulator system and x-ray optics/diagnostics are being installed. The electron gun, 135 MeV injector linac and 250 MeV bunch compressor were commissioned in 2007. Accelerator commissioning activities are presently devoted to the achievement of performance goals for the completed 14 GeV linac.

  16. SLS linac diagnostics—commissioning results

    NASA Astrophysics Data System (ADS)

    Dach, M.; Dehler, M.; Jaggi, A.; Kramert, R.; Pedrozzi, P.; Schlott, V.; Streun, A.

    2000-11-01

    The paper presents the electron beam diagnostics along the 100 MeV pre-injector Linac for the Swiss Light Source (SLS). The concept of the different diagnostic monitors for current and current related measurements, optical measurements and beam position measurements are briefly described. Commissioning results of the pre-injector Linac are presented.

  17. Beam breakup in superconducting recirculating linacs

    SciTech Connect

    Joseph J. Bisognano

    1988-05-01

    The performance and operational flexibility of superconducting recirculating linacs can be limited by a variety of collective phenomena which are grouped under the name beam breakup. In this note the various beam breakup phenomena found in recirculating superconducting radio frequency linacs are described and appraised relative to beam performance.

  18. Induction linacs and pulsed power

    SciTech Connect

    Caporaso, G.J.

    1995-07-11

    Progress in electronic power conversion technology is making possible a new class of induction linacs that can operate at extremely high repetition rates. Advances in insulator technology, pulse forming line design and switching may also lead to a new type of high current accelerator with accelerating gradients at least an order of magnitude greater than those attainable today. The evolution of the induction accelerator pulsed power system will be discussed along with some details of these emerging technologies which are at the frontiers of accelerator technology.

  19. The DARHT Phase 2 Linac

    NASA Astrophysics Data System (ADS)

    Rutkowski, Henry

    The second phase accelerator for the Dual Axis Hydrodynamic Test facility (DARHT) is designed to provide an electron beam pulse that is 2 microsec long, 2kA, and 20 MeV in particle energy. The injector provides 3.2 MeV so that the linac need only provide 16.8 MeV. The linac is made with two types of induction accelerator cells. The first block of 8 cells have a 14 in. beam pipe compared to 10 in. in the remaining 80 cells. The other principal difference is that the first 8 cells have reduced volt-sec in their induction cores as a result of a larger diameter beam pipe. The cells are designed for very reliable high voltage operation. The insulator is Mycalex. Results from prototype tests are given including results from solenoid measurements. Each cell contains a solenoid for beam transport and a set of x-y correction coils to reduce corkscrew motion. Details of tests to determine RF mode impedances relevant to BBU generation are given. Blocks of cells are separated by "intercells" some of which contain transport solenoids. The intercells provide vacuum pumping stations as well. Issues of alignment and installation are discussed.

  20. A cryomodule for the RIA driver linac.

    SciTech Connect

    Fuerst, J. D.; Shepard, K. W.

    2002-10-25

    We present a cryomodule design for the superconducting linacs for the proposed Rare Isotope Accelerator Facility (RIA). This paper discusses the design of a cryomodule for all the drift-tube-loaded superconducting cavities required for the machine. The same basic design will be used for the low and medium velocity sections of the driver linac and also for sections of the radioactive ion beam (RIB) linac. Fundamental design choices such as separate vs. common beam and insulating vacuum spaces are driven by the clean fabrication techniques required for optimum cavity performance. The design can be adapted to a variety of cavity geometries.

  1. Beam dynamics design of a pion linac

    SciTech Connect

    Nath, S; Swain, G.; Garnett, R.; Wangler, T.P.

    1990-01-01

    We have conducted a study of a superconducting linac to accelerate pions produced at LAMPF from 400 or 500 MeV to 925 MeV kinetic energy. For such a linac, it is necessary to keep the machine as short as practical in order to minimize the loss of beam due to particle decay, and to tailor the beam to achieve the maximum flux within the desired momentum bite at the exit. The interplay of these and other considerations with the transverse and longitudinal beam dynamics is discussed, and is illustrated with the simulated performance of reference pion-linac designs.

  2. The SNS Superconducting Linac System

    SciTech Connect

    Claus Rode

    2001-07-01

    The SNS has adopted superconducting RF technology for the high-energy end of its linac. The design uses cavities of {beta} = 0.61 and 0.81 to span the energy region from 186 MeV up to a maximum of 1.3 GeV. Thirty-three of the lower {beta} cavities are contained in 11 cryomodules, and there could be as many as 21 additional cryomodules, each containing four of the higher {beta} cavities, to reach the maximum energy. The design uses a peak surface gradient of 35 MV/m. Each cavity will be driven by a 550 kW klystron. Cryomodules will be connected to the refrigerator by a pair of ''tee'' shape transfer lines. The refrigerator will produce 120 g/sec of refrigeration at 2.1 K, 15 g/sec of liquefaction at 4.5 K, and 8,300 W of 50 K shield refrigeration.

  3. Applications for the RFD linac structure

    NASA Astrophysics Data System (ADS)

    Swenson, Donald A.

    2001-07-01

    With the successful completion and operation of the "Proof-of-Principle" prototype of the Rf Focused Drift tube (RFD) linac structure, our attention has now turned to the identification of the first applications for this new compact and economical linac structure. The principal medical applications are for the production of short-lived radioisotopes for the positron emission tomography (PET and SPECT) application, epithermal neutron beams for the boron neutron capture therapy (BNCT) application, and nanoamperes of energetic (250 MeV) protons for proton therapy. The structure can be configured as a compact injector linac for proton synchrotrons. The structure can be configured as a pulsed cold neutron source to support cold neutron physics and its applications. The principal industrial applications include nondestructive testing (NDT), thermal neutron radiography (TNR), thermal neutron analysis (TNA), and pulsed fast neutron analysis (PFNA). Brief descriptions of these RFD-linac-based systems will be presented.

  4. Injector linac for the MESA facility

    SciTech Connect

    Heine, R.

    2013-11-07

    In this paper we present several possible configurations of an injector linac for the upcoming Mainz Energy-recovering Superconducting Accelerator (MESA) [1] and discuss their suitability for the project.

  5. Dark current model for ILC main linac

    SciTech Connect

    Solyak, N.; Romanov, G.; Mokhov, N.V.; Eidelman, Y.; Tam, Wai-Ming; /Indiana U.

    2008-06-01

    In the ILC Main Linac, the dark current electrons, generated in SRF cavity can be accelerated to hundreds of MeV before being kicked out by quadrupoles and thus will originate electromagnetic cascade showers in the surrounding materials. Some of the shower secondaries can return back into vacuum and be re-accelerated again. The preliminary results of simulation of the dark current generation in ILC cavity, its dynamics in linac are discussing in this paper.

  6. Scaling of Wakefield Effects in Recirculating Linacs

    SciTech Connect

    L. Merminga; G. R. Neil; B. C. Yunn; J. J. Bisognano

    2001-07-01

    Expressions for the induced energy spread and emittance degradation of a single bunch due to the longitudinal and transverse impedance of rf cavities at the end of a linac structure are presented. Scaling of the formulae with rf frequency is derived. Scaling of the threshold current for the multibunch, multipass beam breakup (BBU) instability in recirculating linacs with accelerator and beam parameters is also derived.

  7. Simulation of large acceptance LINAC for muons

    SciTech Connect

    Miyadera, H; Kurennoy, S; Jason, A J

    2010-01-01

    There has been a recent need for muon accelerators not only for future Neutrino Factories and Muon Colliders but also for other applications in industry and medical use. We carried out simulations on a large-acceptance muon linac with a new concept 'mixed buncher/acceleration'. The linac can accept pions/muons from a production target with large acceptance and accelerate muon without any beam cooling which makes the initial section of muon-linac system very compact. The linac has a high impact on Neutrino Factory and Muon Collider (NF/MC) scenario since the 300-m injector section can be replaced by the muon linac of only 10-m length. The current design of the linac consists of the following components: independent 805-MHz cavity structure with 6- or 8-cm-radius aperture window; injection of a broad range of pion/muon energies, 10-100 MeV, and acceleration to 150 - 200 MeV. Further acceleration of the muon beam are relatively easy since the beam is already bunched.

  8. Linac4 H⁻ ion sources.

    PubMed

    Lettry, J; Aguglia, D; Alessi, J; Andersson, P; Bertolo, S; Briefi, S; Butterworth, A; Coutron, Y; Dallocchio, A; David, N; Chaudet, E; Faircloth, D; Fantz, U; Fink, D A; Garlasche, M; Grudiev, A; Guida, R; Hansen, J; Haase, M; Hatayama, A; Jones, A; Koszar, I; Lallement, J-B; Lombardi, A M; Machado, C; Mastrostefano, C; Mathot, S; Mattei, S; Moyret, P; Nisbet, D; Nishida, K; O'Neil, M; Paoluzzi, M; Scrivens, R; Shibata, T; Steyaert, D; Thaus, N; Voulgarakis, G

    2016-02-01

    CERN's 160 MeV H(-) linear accelerator (Linac4) is a key constituent of the injector chain upgrade of the Large Hadron Collider that is being installed and commissioned. A cesiated surface ion source prototype is being tested and has delivered a beam intensity of 45 mA within an emittance of 0.3 π ⋅ mm ⋅ mrad. The optimum ratio of the co-extracted electron- to ion-current is below 1 and the best production efficiency, defined as the ratio of the beam current to the 2 MHz RF-power transmitted to the plasma, reached 1.1 mA/kW. The H(-) source prototype and the first tests of the new ion source optics, electron-dump, and front end developed to minimize the beam emittance are presented. A temperature regulated magnetron H(-) source developed by the Brookhaven National Laboratory was built at CERN. The first tests of the magnetron operated at 0.8 Hz repetition rate are described. PMID:26932021

  9. Linac4 H- ion sources

    NASA Astrophysics Data System (ADS)

    Lettry, J.; Aguglia, D.; Alessi, J.; Andersson, P.; Bertolo, S.; Briefi, S.; Butterworth, A.; Coutron, Y.; Dallocchio, A.; David, N.; Chaudet, E.; Faircloth, D.; Fantz, U.; Fink, D. A.; Garlasche, M.; Grudiev, A.; Guida, R.; Hansen, J.; Haase, M.; Hatayama, A.; Jones, A.; Koszar, I.; Lallement, J.-B.; Lombardi, A. M.; Machado, C.; Mastrostefano, C.; Mathot, S.; Mattei, S.; Moyret, P.; Nisbet, D.; Nishida, K.; O'Neil, M.; Paoluzzi, M.; Scrivens, R.; Shibata, T.; Steyaert, D.; Thaus, N.; Voulgarakis, G.

    2016-02-01

    CERN's 160 MeV H- linear accelerator (Linac4) is a key constituent of the injector chain upgrade of the Large Hadron Collider that is being installed and commissioned. A cesiated surface ion source prototype is being tested and has delivered a beam intensity of 45 mA within an emittance of 0.3 π ṡ mm ṡ mrad. The optimum ratio of the co-extracted electron- to ion-current is below 1 and the best production efficiency, defined as the ratio of the beam current to the 2 MHz RF-power transmitted to the plasma, reached 1.1 mA/kW. The H- source prototype and the first tests of the new ion source optics, electron-dump, and front end developed to minimize the beam emittance are presented. A temperature regulated magnetron H- source developed by the Brookhaven National Laboratory was built at CERN. The first tests of the magnetron operated at 0.8 Hz repetition rate are described.

  10. Field size consistency of nominally matched linacs.

    PubMed

    Kairn, T; Asena, A; Charles, P H; Hill, B; Langton, C M; Middlebrook, N D; Moylan, R; Trapp, J V

    2015-06-01

    Given that there is increasing recognition of the effect that sub-millimetre changes in collimator position can have on radiotherapy beam dosimetry, this study aimed to evaluate the potential variability in small field collimation that may exist between otherwise matched linacs. Field sizes and field output factors were measured using radiochromic film and an electron diode, for jaw- and MLC-collimated fields produced by eight dosimetrically matched Varian iX linacs (Varian Medical Systems, Palo Alto, USA). This study used nominal sizes from 0.6 × 0.6 to 10 × 10 cm(2), for jaw-collimated fields, and from 1 × 1 to 10 × 10 cm(2) for MLC-collimated fields, delivered from a zero (head up, beam directed vertically downward) gantry angle. Differences between the field sizes measured for the eight linacs exceeded the uncertainty of the film measurements and the repositioning uncertainty of the jaws and MLCs on one linac. The dimensions of fields defined by MLC leaves were more consistent between linacs, while also differing more from their nominal values than fields defined by orthogonal jaws. The field output factors measured for the different linacs generally increased with increasing measured field size for the nominal 0.6 × 0.6 to 1 × 1 cm(2) fields, and became consistent between linacs for nominal field sizes of 2 × 2 cm(2) and larger. The inclusion in radiotherapy treatment planning system beam data of small field output factors acquired in fields collimated by jaws (rather than the more-reproducible MLCs), associated with either the nominal or the measured field sizes, should be viewed with caution. The size and reproducibility of the fields (especially the small fields) used to acquire treatment planning data should be investigated thoroughly as part of the linac or planning system commissioning process. Further investigation of these issues, using different linac models, collimation systems and beam orientations, is recommended. PMID

  11. RFI-Based Ion Linac Systems

    NASA Astrophysics Data System (ADS)

    Swenson, Donald A.

    A new company, Ion Linac Systems, Inc., has been formed to promote the development, manufacture, and marketing of intense, RFI-based, Ion Linac Systems. The Rf Focused Interdigital (RFI) linac structure was invented by the author while at Linac Systems, LLC. The first step, for the new company, will be to correct a flaw in an existing RFI-based linac system and to demonstrate "good transmission" through the system. The existing system, aimed at the BNCT medical application, is designed to produce a beam of 2.5 MeV protons with an average beam current of 20 mA. In conjunction with a lithium target, it will produce an intense beam of epithermal neutrons. This system is very efficient, requiring only 180 kW of rf power to produce a 50 kW proton beam. In addition to the BNCT medical application, the RFI-based systems should represent a powerful neutron generator for homeland security, defence applications, cargo container inspection, and contraband detection. The timescale to the demonstration of "good transmission" is early fall of this year. Our website is www.ionlinacs.com.

  12. Commissioning Experience for the SNS Linac

    SciTech Connect

    Aleksandrov, A.; Assadi, S.; Campisi, I.; Chu, P.; Cousineau, S.; Danilov, V.; Dodson, B.G.; Galambos, J.; Jeon, D.; Henderson, S.; Holtkamp, N.; Kravchuk, L.; Kim, S.; Plum, M.; Tanke, E.; Stockli, M.

    2005-06-08

    The Spallation Neutron Source accelerator systems will deliver a 1 GeV, 1.44 MW proton beam to a liquid mercury target for neutron scattering research. The accelerator complex consists of an H- injector, capable of producing one-ms-long pulses at 60 Hz repetition rate with 38 mA peak current, a 1 GeV linear accelerator, an accumulator ring and associated transport lines. A 2.5 MeV beam from the Front End is accelerated to 86 MeV in a Drift Tube Linac, then to 185 MeV in a Coupled-Cavity Linac and then to 1 GeV in a Superconducting Linac. The staged beam commissioning of the accelerator complex is proceeding as component installation progresses. The Front End, Drift Tube Linac and part of the Coupled-Cavity Linac have been commissioned at ORNL. The primary design goals of peak current, transverse emittance and beam energy have been achieved. Results and status of the beam commissioning program will be presented.

  13. Beam steering in the SLC linac

    SciTech Connect

    Sheppard, J.C.; Lee, M.J.; Ross, M.C.; Seeman, J.T.; Stiening, R.F.; Woodley, M.D.

    1985-02-01

    In order to control emittance growth due to transverse wakefields it will be necessary to transport electrons and positrons through the Stanford Linear Collider (SLC) linac to within a hundred ..mu..m of the centers of the linac irises. Beam centering will be accomplished using computer routines to read stripline beam position monitors and in turn correct the orbits with dipole magnets. Several different steering algorithms have been investigated using electrons in the first third of the SLC linac lattice. The most promising scheme is a cascade of modified ''three-bumps'' in conjunction with long spanning harmonic corrections. General features of the orbit correcting software are discussed along with the mathematical recipes for correction. Experimental results and a discussion of future plans are presented.

  14. Beam steering in the SLC linac

    SciTech Connect

    Sheppard, J.C.; Lee, M.J.; Ross, M.C.; Seeman, J.T.; Stiening, R.F.; Woodley, M.D.

    1985-10-01

    In order to control emittance growth due to transverse wakefields it will be necessary to transport electrons and positrons through the Stanford Linear Collider (SLC) linac to within a hundred ..mu..m of the centers of the linac irises. Beam centering will be accomplished using computer routines to read stripline beam position monitors and in turn correct the orbits with dipole magnets. Several different steering algorithms have been investigated using electrons in the first third of the SLC linac lattice. The most promising scheme is a cascade of modified ''three-bumps'' in conjunction with long spanning harmonic corrections. General features of the orbit correcting software are discussed along with the mathematical recipes for correction. Experimental results and a discussion of future plans are presented.

  15. Induced radioisotopes in a linac treatment hall.

    PubMed

    Vega-Carrillo, Héctor René; de Leon-Martinez, Héctor Asael; Rivera-Perez, Esteban; Luis Benites-Rengifo, Jorge; Gallego, Eduardo; Lorente, Alfredo

    2015-08-01

    When linacs operate above 8MV an undesirable neutron field is produced whose spectrum has three main components: the direct spectrum due to those neutrons leaking out from the linac head, the scattered spectrum due to neutrons produced in the head that collides with the nuclei in the head losing energy and the third spectrum due to room-return effect. The third category of spectrum has mainly epithermal and thermal neutrons being constant at any location in the treatment hall. These neutrons induce activation in the linac components, the concrete walls and in the patient body. Here the induced radioisotopes have been identified in concrete samples located in the hall and in one of the wedges. The identification has been carried out using a gamma-ray spectrometer. PMID:25989748

  16. ILC Linac R&D at SLAC

    SciTech Connect

    Adolphsen, C.; /SLAC

    2006-08-09

    Since the ITRP recommendation in August 2004 to use superconducting rf technology for a next generation linear collider, the former NLC Group at SLAC has been actively pursuing a broad range of R&D for this collider (the ILC). In this paper, the programs concerning linac technology are reviewed. Current activities include the development of a Marx-style modulator and a 10 MW sheet-beam klystron, operation of an L-band (1.3 GHz) rf source using an SNS HVCM modulator and commercial klystrons, design of a more efficient and less costly rf distribution system, construction of a coupler component test stand, fabrication of a prototype positron capture cavity, beam tests of prototype S-band linac beam position monitors and preparations for magnetic center stability measurements of a prototype SC linac quad.

  17. Energy Recovery Linacs for Commercial Radioisotope Production

    SciTech Connect

    Sy, Amy; Krafft, Geoffrey A.; Johnson, Rolland; Roberts, Tom; Boulware, Chase; Hollister, Jerry

    2015-09-01

    Photonuclear reactions with bremsstrahlung photon beams from electron linacs can generate radioisotopes of critical interest. An SRF Energy Recovery Linac (ERL) provides a path to a more diverse and reliable domestic supply of short-lived, high-value, high-demand isotopes in a more compact footprint and at a lower cost than those produced by conventional reactor or ion accelerator methods. Use of an ERL enables increased energy efficiency of the complex through energy recovery of the waste electron beam, high electron currents for high production yields, and reduced neutron production and shielding activation at beam dump components. Simulation studies using G4Beamline/GEANT4 and MCNP6 through MuSim, as well as other simulation codes, will design an ERL-based isotope production facility utilizing bremsstrahlung photon beams from an electron linac. Balancing the isotope production parameters versus energy recovery requirements will inform a choice of isotope production target for future experiments.

  18. Coupled-cavity drift-tube linac

    DOEpatents

    Billen, J.H.

    1996-11-26

    A coupled-cavity drift-tube linac (CCDTL) combines features of the Alvarez drift-tube linac (DTL) and the {pi}-mode coupled-cavity linac (CCL). In one embodiment, each accelerating cavity is a two-cell, 0-mode DTL. The center-to-center distance between accelerating gaps is {beta}{lambda}, where {lambda} is the free-space wavelength of the resonant mode. Adjacent accelerating cavities have oppositely directed electric fields, alternating in phase by 180 degrees. The chain of cavities operates in a {pi}/2 structure mode so the coupling cavities are nominally unexcited. The CCDTL configuration provides an rf structure with high shunt impedance for intermediate velocity charged particles, i.e., particles with energies in the 20-200 MeV range. 5 figs.

  19. Coupled-cavity drift-tube linac

    DOEpatents

    Billen, James H.

    1996-01-01

    A coupled-cavity drift-tube linac (CCDTL) combines features of the Alvarez drift-tube linac (DTL) and the .pi.-mode coupled-cavity linac (CCL). In one embodiment, each accelerating cavity is a two-cell, 0-mode DTL. The center-to-center distance between accelerating gaps is .beta..lambda., where .lambda. is the free-space wavelength of the resonant mode. Adjacent accelerating cavities have oppositely directed electric fields, alternating in phase by 180 degrees. The chain of cavities operates in a .pi./2 structure mode so the coupling cavities are nominally unexcited. The CCDTL configuration provides an rf structure with high shunt impedance for intermediate velocity charged particles, i.e., particles with energies in the 20-200 MeV range.

  20. LCLS LLRF Upgrades to the SLAC Linac

    SciTech Connect

    Akre, R.; Dowell, D.; Emma, P.; Frisch, J.; Hong, B.; Kotturi, K.; Krejcik, P.; Wu, J.; Byrd, J.; /LBL, Berkeley

    2007-10-04

    The Linac Coherent Light Source (LCLS) at SLAC will be the brightest X-ray laser in the world when it comes on line. In order to achieve the brightness a 200fS length electron bunch is passed through an undulator. To create the 200fS, 3kA bunch, a 10pS electron bunch, created from a photo cathode in an RF gun, is run off crest on the RF to set up a position to energy correlation. The bunch is then compressed by chicanes. The stability of the RF system is critical in setting up the position to energy correlation. Specifications derived from simulations require the RF system to be stable to below 200fS in several critical injector stations and the last kilometer of linac. The SLAC linac RF system is being upgraded to meet these requirements.

  1. The Linac Cooherent Light Source (LCLS) Accelerator

    SciTech Connect

    Wu, Juhao; Emma, P.; /SLAC

    2007-03-21

    The Linac Coherent Light Source (LCLS) is a SASE x-ray Free-Electron Laser (FEL) based on the final kilometer of the Stanford Linear Accelerator. Such an FEL requires a high energy, high brightness electron beam to drive the FEL instability to saturation. When fed by an RF-photocathode gun, and modified to include two bunch compressor chicanes, the SLAC linac will provide such a high quality beam at 14 GeV and 1-{micro}m normalized emittance. In this paper, we report on recent linac studies, including beam stability and tolerances, longitudinal and transverse feedback systems, conventional and time-resolved diagnostics, and beam collimation systems. Construction and installation of the injector through first bunch compressor will be completed by December 2006, and electron commissioning is scheduled to begin in January of 2007.

  2. S-Band Loads for SLAC Linac

    SciTech Connect

    Krasnykh, A.; Decker, F.-J.; LeClair, R.; /INTA Technologies, Santa Clara

    2012-08-28

    The S-Band loads on the current SLAC linac RF system were designed, in some cases, 40+ years ago to terminate 2-3 MW peak power into a thin layer of coated Kanthal material as the high power absorber [1]. The technology of the load design was based on a flame-sprayed Kanthal wire method onto a base material. During SLAC linac upgrades, the 24 MW peak klystrons were replaced by 5045 klystrons with 65+ MW peak output power. Additionally, SLED cavities were introduced and as a result, the peak power in the current RF setup has increased up to 240 MW peak. The problem of reliable RF peak power termination and RF load lifetime required a careful study and adequate solution. Results of our studies and three designs of S-Band RF load for the present SLAC RF linac system is discussed. These designs are based on the use of low conductivity materials.

  3. Diagnostics For Recirculating And Energy Recovered Linacs

    SciTech Connect

    Geoffrey A. Krafft; Jean-Claude Denard

    2002-12-18

    In this paper, the electron beam diagnostics developed for recirculating electron accelerators will be reviewed. The main novelties in dealing with such accelerators are: to have sufficient information and control possibilities for the longitudinal phase space, to have means to accurately set the recirculation path length, and to have a means to distinguish the beam passes on measurements of position in the linac proper. The solutions to these problems obtained at Jefferson Laboratory and elsewhere will be discussed. In addition, more standard instrumentation (profiling and emittance measurements) will be reviewed in the context of recirculating linacs. Finally, and looking forward, electron beam diagnostics for applications to high current energy recovered linacs will be discussed.

  4. EXPERIENCE WITH THE SNS SC LINAC

    SciTech Connect

    Zhang, Yan; Aleksandrov, Alexander V; Allen, Christopher K; Campisi, Isidoro E; Cousineau, Sarah M; Danilov, Viatcheslav; Galambos, John D; Holmes, Jeffrey A; Jeon, Dong-O; Kim, Sang-Ho; Pelaia II, Tom; Plum, Michael A; Shishlo, Andrei P

    2008-01-01

    The SNS superconducting linac (SCL) is designed to deliver 1 GeV, up to 1.56-MW pulsed H- beams for neutron production. Commissioning of the accelerator systems was completed in June 2006, and the maximum beam energy achieved was approximately 952 MeV. In 2007, the SCL was successfully tuned for 1.01-GeV beam during a test operation. In the linac tune-up, phase scan signature matching, drifting beam measurement, and linac radio frequency cavity phase scaling were applied. In this paper, we will introduce the experiences with the SCL, including the tune-up, beam loss, and beam activation, and briefly discuss beam parameter measurements

  5. A Superconducting Linac Proton Driver at Fermilab

    NASA Astrophysics Data System (ADS)

    Foster, G. William

    2004-05-01

    A proton driver has emerged as the leading candidate for Fermilab's next near-term accelerator project. The preferred technical solution is an 8 GeV superconducting linac based on technology developed for TESLA and the Spallation Neutron Source (SNS). Its primary mission is to serve as a single-stage H- injector to prepare 2 MW "Super-Beams" for Neutrino experiments using the Fermilab Main Injector. The linac can also accelerate electrons, protons, and relativistic muons, permitting future applications such as a driver for an FEL, a long-pulse spallation source, the driver for an intense 8 GeV neutrino or kaon program, and potential applications to a neutrino factory or muon collider. The technical design of the 8 GeV linac, as well as the design of an alternative synchrotron based proton driver, will be described along with plans for project proposal and construction.

  6. Multipass Beam Breakup in Energy Recovery Linacs

    SciTech Connect

    Eduard Pozdeyev; Christopher Tennant; Joseph Bisognano; M Sawamura; R. Hajima; T.I. Smith

    2005-03-19

    This paper is a compilation of several presentations on multipass beam breakup (BBU) in energy recovery linacs (ERL) given at the 32nd Advanced ICFA Beam Workshop on ERLs. The goal of this paper is to summarize the progress achieved in analytical, numerical, and experimental studies of the instability and outline available and proposed BBU mitigation techniques. In this paper, a simplified theory of multipass BBU in recirculating linacs is presented. Several BBU suppression techniques and their working principles are discussed. The paper presents an overview of available BBU codes. Results of experimental studies of multipass BBU at the Jefferson Laboratory (JLab) FEL Upgrade are described.

  7. Proton linacs for boron neutron capture therapy

    SciTech Connect

    Lennox, A.J. |

    1993-08-01

    Recent advances in the ability to deliver boron-containing drugs to brain tumors have generated interest in {approximately}4 MeV linacs as sources of epithermal neutrons for radiation therapy. In addition, fast neutron therapy facilities have been studying methods to moderate their beams to take advantage of the high cross section for epithermal neutrons on boron-10. This paper describes the technical issues involved in each approach and presents the motivation for undertaking such studies using the Fermilab linac. the problems which must be solved before therapy can begin are outlined. Status of preparatory work and results of preliminary measurements are presented.

  8. Error analysis in post linac to driver linac transport beam line of RAON

    NASA Astrophysics Data System (ADS)

    Kim, Chanmi; Kim, Eun-San

    2016-07-01

    We investigated the effects of magnet errors in the beam transport line connecting the post linac to the driver linac (P2DT) in the Rare Isotope Accelerator in Korea (RAON). The P2DT beam line is bent by 180-degree to send the radioactive Isotope Separation On-line (ISOL) beams accelerated in Linac-3 to Linac-2. This beam line transports beams with multi-charge state 132Sn45,46,47. The P2DT beam line includes 42 quadrupole, 4 dipole and 10 sextupole magnets. We evaluate the effects of errors on the trajectory of the beam by using the TRACK code, which includes the translational and the rotational errors of the quadrupole, dipole and sextupole magnets in the beam line. The purpose of this error analysis is to reduce the rate of beam loss in the P2DT beam line. The distorted beam trajectories can be corrected by using six correctors and seven monitors.

  9. Vacuum system for superconducting LINAC at TIFR

    NASA Astrophysics Data System (ADS)

    Pillay, R. G.

    2008-05-01

    The superconducting heavy ion LINAC booster at the TIFR-BARC facility has been operational. Seven super conducting cryostats containing 4 quarter wave resonators each along with beam lines, bending magnets, switching magnet, diagnostics and vacuum system have been commissioned. The heart of the cryogenic system for the heavy ion superconducting LINAC booster is a custom-built liquid helium refrigerator made by Linde Kryotechnik, Switzerland. The Refrigerator is rated for 300 Watts at 4.5 K with a dual JT (Joule-Thomson valve) at the final cooling stage, which allows simultaneous connections to the cryogenic loads (the LINAC module cryostats) and to a liquid helium storage dewar (1000 litres). The two-phase helium at 4.5 K produced at the JT stage in the refrigerator is delivered to the cryostats through a cryogenic distribution system. The cryogenic distribution system for the LINAC is designed to deliver both liquid helium and liquid nitrogen to the cryostats. The details of UHV system, indigenously developed beam line components, pumps and module cryostats will be presented.

  10. Cyclotron and linac production of Ac-225.

    PubMed

    Melville, Graeme; Allen, Barry J

    2009-04-01

    Radium needles that were once implanted into tumours as a cancer treatment are now obsolete and constitute a radioactive waste problem, as their half-life is 1600 years. The reduction of radium by photonuclear transmutation by bombarding Ra-226 with high-energy photons from a medical linear accelerator (linac) has been investigated. A linac dose of 2800 Gy produced about 2.4 MBq (64 microCi) of Ra-225, which decays to Ac-225 and can then be used for 'Targeted Alpha Therapy' (TAT) of cancer. This result, while consistent with theoretical calculations, is far too low to be of practical use unless much larger quantities of radium are irradiated. The increasing application of Ac-225 for cancer therapy indicates the potential need for its increased production and availability. This paper investigates the possibility of producing of Ac-225 in commercial quantities, which could potentially reduce obsolete radioactive material and displace the need for expensive importation of Ac-225 from the USA and Russia in the years ahead. Scaled up production of Ac-225 could theoretically be achieved by the use of a high current cyclotron or linac. Production specifications are determined for a linac in terms of current, pulse length and frequency, as well as an examination of other factors such as radiation issues and radionuclei separation. Yields are compared with those calculated for the Australian National Cyclotron in Sydney. PMID:19135381

  11. A Stability of LCLS Linac Modulators

    SciTech Connect

    Decker, F.-J.; Krasnykh, A.; Morris, B.; Nguyen, M.; /SLAC

    2012-06-13

    Information concerning to a stability of LCLS RF linac modulators is allocated in this paper. In general a 'pulse-to-pulse' modulator stability (and RF phase as well) is acceptable for the LCLS commission and FEL programs. Further modulator stability improvements are possible and approaches are discussed based on our experimental results.

  12. Comments on a linac based beauty factory

    SciTech Connect

    Samuel Heifets; Geoffrey Krafft; C. McDowell; M. Fripp

    1990-02-01

    A consistent set of parameters is given for a B-factory based on collisions of an electron beam from a SRF linac with the positron beam in a storage ring. An optimized lattice, an impedance estimate, a study of beam stability, and a discussion of collisions with large disruption parameters are included.

  13. Design of post linac to driver linac transport beam line in rare isotope accelerator

    NASA Astrophysics Data System (ADS)

    Kim, Chanmi; Kim, Eun-San

    2015-07-01

    We investigated the design of a beam transport line connecting the post linac to the driver linac (P2DT) in the Rare Isotope Accelerator (RAON). P2DT beam line is designed by 180° bending scheme to send the radioactive isotope separation on-line (ISOL) beams accelerated in the Linac-3 to Linac-2. The beam line is designed as a 180° bend for the transport of a multi-charge state 132Sn+45,+46,+47 beam. We used the TRACE 3-D, TRACK, and ORBIT codes to design the optics system, which also includes two bunchers and ten sextupole magnets for chromaticity compensation. The transverse emittance growth is minimized by adopting mirror symmetric optics and by correcting second-order aberrations using sextupoles. We report on the multi-charge state beam transport performance of the designed beam line. The main characteristics of the P2DT line are to minimize beam loss and the growth of emittance, and for charge stripping. Beam optics for P2DT is optimized for reducing beam loss and charge stripping. As Linac-3 may accelerate the stable beam and radioactive beam simultaneously, P2DT line also transports the stable beam and radioactive beam simultaneously. Thus, we need a RF switchyard to send the stable beam to the ISOL target and the radioactive beam to the high-energy experimental area in Linac-2 end.

  14. Linac mechanic QA using a cylindrical phantom

    NASA Astrophysics Data System (ADS)

    Mamalui-Hunter, Maria; Li, Harold; Low, Daniel A.

    2008-09-01

    Precise mechanical operation of a linear accelerator (linac) is critical for accurate radiation therapy dose delivery. Quantitative procedures for linac mechanical quality assurance (QA) used in the standard of care are time consuming and therefore conducted on a relatively infrequent basis. We present a method for evaluating the mechanical performance of a linac based on a series of projection portal images of a prototype cylindrical phantom with embedded radiopaque fiducial markers. The marker autodetection process included modeling imager response to the radiation beam where the projected cylinder attenuation yielded a non-uniform image background. The linac mechanical characteristics were estimated based on nonlinear multi-objective optimization of the projected marker locations. The estimated geometry parameters for the tested commercial model were gantry angle deviation 0.075 ± 0.076° (1 SD), gantry sag 0.026 ± 0.02°, source-to-axis distance SAD 998.3 ± 1.7 mm, source-to-detector distance SDD 1493 ± 5.0 mm, couch vertical motion 0.6 ± 0.45 mm, couch rotation 0.154 ± 0.1° and average linac rotation center (1.02, -0.27, -0.37) ± (0.36,0.333,1.20) mm relative to the laser intersection. The imager shift was [-0.44, 2.6] ± [0.20, 1.1] mm and the imager orientation was in-plane rotation 0.05 ± 0.03°, roll -0.14 ± 0.09° and pitch -0.9 ± 0.604°. The performance of this procedure concerning marker detection and optimization was examined by comparing the detected set of marker coordinates to its back-calculated counterpart for three subgroups of markers: central, wall and intermediate relative to the center of the phantom. The maximum difference was less than 0.25 mm with a mean of 0.146 mm and a standard deviation of 0.07 mm. The clinical use of this automated procedure will allow more efficient, more thorough, and more frequent mechanical linac QA.

  15. Linac mechanic QA using a cylindrical phantom.

    PubMed

    Mamalui-Hunter, Maria; Li, Harold; Low, Daniel A

    2008-09-21

    Precise mechanical operation of a linear accelerator (linac) is critical for accurate radiation therapy dose delivery. Quantitative procedures for linac mechanical quality assurance (QA) used in the standard of care are time consuming and therefore conducted on a relatively infrequent basis. We present a method for evaluating the mechanical performance of a linac based on a series of projection portal images of a prototype cylindrical phantom with embedded radiopaque fiducial markers. The marker autodetection process included modeling imager response to the radiation beam where the projected cylinder attenuation yielded a non-uniform image background. The linac mechanical characteristics were estimated based on nonlinear multi-objective optimization of the projected marker locations. The estimated geometry parameters for the tested commercial model were gantry angle deviation 0.075 +/- 0.076 degrees (1 SD), gantry sag 0.026 +/- 0.02 degrees , source-to-axis distance SAD 998.3 +/- 1.7 mm, source-to-detector distance SDD 1493 +/- 5.0 mm, couch vertical motion 0.6 +/- 0.45 mm, couch rotation 0.154 +/- 0.1 degrees and average linac rotation center (1.02, -0.27, -0.37) +/- (0.36,0.333,1.20) mm relative to the laser intersection. The imager shift was [-0.44, 2.6] +/- [0.20, 1.1] mm and the imager orientation was in-plane rotation 0.05 +/- 0.03 degrees , roll -0.14 +/- 0.09 degrees and pitch -0.9 +/- 0.604 degrees . The performance of this procedure concerning marker detection and optimization was examined by comparing the detected set of marker coordinates to its back-calculated counterpart for three subgroups of markers: central, wall and intermediate relative to the center of the phantom. The maximum difference was less than 0.25 mm with a mean of 0.146 mm and a standard deviation of 0.07 mm. The clinical use of this automated procedure will allow more efficient, more thorough, and more frequent mechanical linac QA. PMID:18723927

  16. High Current Energy Recovery Linac at BNL

    SciTech Connect

    Vladimir N. Litvinenko; Donald Barton; D. Beavis; Ilan Ben-Zvi; Michael Blaskiewicz; J.M. Brennan; A. Burrill; R. Calaga; P. Cameron; X. Chang; Roger Connolly; D. Gassner; H. Hahn; A. Hershcovitch; H.C. Hseuh; P. Johnson; D. Kayran; J. Kewisch; R. Lambiase; G. McIntyre; W. Meng; T. C. Nehring; A. Nicoletti; D. Pate; J. Rank; T. Roser; T. Russo; J. Scaduto; K. Smith; T. Srinivasan-Rao; N. Williams; K.-C. Wu; Vitaly Yakimenko; K. Yip; A. Zaltsman; Y. Zhao; H. Bluem; A. Burger; Mike Cole; A. Favale; D. Holmes; John Rathke; Tom Schultheiss; A. Todd; J. Delayen; W. Funk; L. Phillips; Joe Preble

    2004-08-01

    We present the design, the parameters of a small test Energy Recovery Linac (ERL) facility, which is under construction at Collider-Accelerator Department, BNL. This R&D facility has goals to demonstrate CW operation of ERL with average beam current in the range of 0.1 - 1 ampere, combined with very high efficiency of energy recovery. A possibility for future up-grade to a two-pass ERL is considered. The heart of the facility is a 5-cell 700 MHz super-conducting RF linac with HOM damping. Flexible lattice of ERL provides a test-bed for testing issues of transverse and longitudinal instabilities and diagnostics of intense CW e-beam. ERL is also perfectly suited for a far-IR FEL. We present the status and our plans for construction and commissioning of this facility.

  17. Re-circulating linac vacuum system

    SciTech Connect

    Wells, Russell P.; Corlett, John N.; Zholents, Alexander A.

    2003-05-09

    The vacuum system for a proposed 2.5 GeV, 10{Mu}A recirculating linac synchrotron light source [1] is readily achievable with conventional vacuum hardware and established fabrication processes. Some of the difficult technical challenges associated with synchrotron light source storage rings are sidestepped by the relatively low beam current and short beam lifetime requirements of a re-circulating linac. This minimal lifetime requirement leads directly to relatively high limits on the background gas pressure through much of the facility. The 10{Mu}A average beam current produces very little synchrotron radiation induced gas desorption and thus the need for an ante-chamber in the vacuum chamber is eliminated. In the arc bend magnets, and the insertion devices, the vacuum chamber dimensions can be selected to balance the coherent synchrotron radiation and resistive wall wakefield effects, while maintaining the modest limits on the gas pressure and minimal outgassing.

  18. LLRF System Upgrade for the SLAC Linac

    SciTech Connect

    Hong, Bo; Akre, Ron; Pacak, Vojtech; /SLAC

    2012-07-06

    The Linac Coherent Light Source (LCLS) at SLAC is in full user operation and has met the stability goals for stable lasing. The 250pC bunch can be compressed to below 100fS before passing through an undulator. In a new mode of operation a 20pC bunch is compressed to about 10fS. Experimenters are regularly using this shorter X-ray pulse and getting pristine data. The 10fS bunch has timing jitter on the order of 100fS. Physicists are requesting that the RF system achieve better stability to reduce timing jitter. Drifts in the RF system require longitudinal feedbacks to work over large ranges and errors result in reduced performance of the LCLS. A new RF system is being designed to help diagnose and reduce jitter and drift in the SLAC linac.

  19. The source development lab linac at BNL

    SciTech Connect

    Graves, W.S.; Johnson, E.D.; Raubenheimer, T.O.

    1996-12-01

    A 210 MeV SLAC-type electron linac is currently under construction at BNL as part of the Source Development Laboratory. A 1.6 cell RF photoinjector is employed as the high brightness electron source which is excited by a frequency tripled Titanium:Sapphire laser. This linac will be used for several source development projects including a short bunch storage ring, and a series of FEL experiments based on the 10 m long NISUS undulator. The FEL will be operated as either a SASE or seeded beam device using the Ti:Sapp laser. For the seeded beam experiments; direct amplification, harmonic generation, and chirped pulse amplification modes will be studied, spanning an output wavelength range from 900 nm down to 100 nm. This paper presents the project`s design parameters and results of recent modeling using the PARMELA and MAD simulation codes.

  20. New high power linacs and beam physics

    SciTech Connect

    Wangler, T.P.; Gray, E.R.; Nath, S.; Crandall, K.R.; Hasegawa, K.

    1997-08-01

    New high-power proton linacs must be designed to control beam loss, which can lead to radioactivation of the accelerator. The threat of beam loss is increased significantly by the formation of beam halo. Numerical simulation studies have identified the space-charge interactions, especially those that occur in rms mismatched beams, as a major concern for halo growth. The maximum-amplitude predictions of the simulation codes must be subjected to independent tests to confirm the validity of the results. Consequently, the authors compare predictions from the particle-core halo models with computer simulations to test their understanding of the halo mechanisms that are incorporated in the computer codes. They present and discuss scaling laws that provide guidance for high-power linac design.

  1. HIGH CURRENT ENERGY RECOVERY LINAC AT BNL.

    SciTech Connect

    LITVINENKO,V.N.; BEN-ZVI,I.; BARTON,D.S.; ET AL.

    2005-05-16

    We present the design and parameters of an energy recovery linac (ERL) facility, which is under construction in the Collider-Accelerator Department at BNL. This R&D facility has the goal of demonstrating CW operation of an ERL with an average beam current in the range of 0.1-1 ampere and with very high efficiency of energy recovery. The possibility of a future upgrade to a two-pass ERL is also being considered. The heart of the facility is a 5-cell 703.75 MHz super-conducting RF linac with strong Higher Order Mode (HOM) damping. The flexible lattice of the ERL provides a test-bed for exploring issues of transverse and longitudinal instabilities and diagnostics of intense CW electron beams. This ERL is also perfectly suited for a far-IR FEL. We present the status and plans for construction and commissioning of this facility.

  2. LINAC-based transuranic waste characterization system

    SciTech Connect

    Schultz, F.J.; Womble, P.C.; Vourvopoulos, G.; Roberts, M.L.

    1994-12-31

    Remote-handled transuranic nuclear waste poses a particular challenge for assaying due to the high neutron and gamma ray background that emanates from the non-fissile, but highly radioactive material, contained with the waste. The utilization of a RFQ linac with a neutron flux has shown that, in principle, the differential die-away technique can reliably assay this special class of nuclear waste.

  3. Photocathodes for the energy recovery linacs

    SciTech Connect

    Rao, T; Burrill, A; Chang, X Y; Smedley, J; Nishitani, T; Garcia, C Hernandez; Poelker, M; Seddon, E; Hannon, F E; Sinclair, C K; Lewellen, J; Feldman, D

    2005-03-19

    This paper presents an overview of existing and emerging technologies on electron sources that can service various Energy Recovering Linacs under consideration. Photocathodes that can deliver average currents from 1 mA to 1 A, the pros and cons associated with these cathodes are addressed. Status of emerging technologies such as secondary emitters, cesiated dispenser cathodes, field and photon assisted field emitters and super lattice photocathodes are also reviewed.

  4. PHOTOCATHODES FOR THE ENERGY RECOVERY LINACS.

    SciTech Connect

    RAO, T.; BURRILL, A.; CHANG, X.Y.; SMEDLEY, J.; ET AL.

    2005-03-19

    This paper presents an overview of existing and emerging technologies on electron sources that can service various Energy Recovering Linacs under consideration. Photocathodes that can deliver average currents from 1 mA to 1 A, the pros and cons associated with these cathodes are addressed. Status of emerging technologies such as secondary emitters, cesiated dispenser cathodes, field and photon assisted field emitters and super lattice photocathodes are also reviewed.

  5. Linac Coherent Light Source Monte Carlo Simulation

    Energy Science and Technology Software Center (ESTSC)

    2006-03-15

    This suite consists of codes to generate an initial x-ray photon distribution and to propagate the photons through various objects. The suite is designed specifically for simulating the Linac Coherent Light Source, and x-ray free electron laser (XFEL) being built at the Stanford Linear Accelerator Center. The purpose is to provide sufficiently detailed characteristics of the laser to engineers who are designing the laser diagnostics.

  6. Beam dynamics in heavy ion induction LINACS

    SciTech Connect

    Smith, L.

    1981-10-01

    Interest in the use of an induction linac to accelerate heavy ions for the purpose of providing the energy required to initiate an inertially confined fusion reaction has stimulated a theoretical effort to investigate various beam dynamical effects associated with high intensity heavy ion beams. This paper presents a summary of the work that has been done so far; transverse, longitudinal and coupled longitudinal transverse effects are discussed.

  7. Photocathodes for the energy recovery linacs

    NASA Astrophysics Data System (ADS)

    Rao, T.; Burrill, A.; Chang, X. Y.; Smedley, J.; Nishitani, T.; Hernandez Garcia, C.; Poelker, M.; Seddon, E.; Hannon, F. E.; Sinclair, C. K.; Lewellen, J.; Feldman, D.

    2006-02-01

    This paper presents an overview of existing and emerging technologies on electron sources that can service various energy recovering linacs under consideration. Photocathodes that can deliver average currents from 1 mA to 1 A, the pros and cons associated with these cathodes are addressed. Status of emerging technologies such as secondary emitters, cesiated dispenser cathodes, field and photon assisted field emitters and super lattice photocathodes are also reviewed.

  8. LINAC for ADS application - accelerator technologies

    SciTech Connect

    Garnett, Robert W; Sheffreld, Richard L

    2009-01-01

    Sifnificant high-current, high-intensity accelerator research and development have been done in the recent past in the US, centered primarily at Los Alamos National Laboratory. These efforts have included designs for the Accelerator Production of Tritium Project, Accelerator Transmutation of Waste, and Accelerator Driven Systems, as well as many others. This past work and some specific design principles that were developed to optimie linac designs for ADS and other high-intensity applications will be discussed briefly.

  9. Multiple beam induction linac research at LBL

    SciTech Connect

    Garvey, T.; Eylon, S.; Fessenden, T.J.; Hahn, K.; Henestroza, E.; Keefe, D.

    1990-06-01

    We present results of progress on the LBL multiple beam induction linac experiment (MBE-4). This machine models the accelerator physics of the electric-focused portion of a driver for heavy ion inertial confinement fusion. Four beams of cesium ions are accelerated in common through twenty four induction gaps while being separately focused in individual electrostatic AG focusing channels. Early experiments have demonstrated current amplification in the linac, from 10 mA to 90 mA per beam. This is achieved both by acceleration (from 200 keV to 1 MeV) and by carefully controlled bunch compression. Recent experiments have concentrated on studies of beams extracted from an ion source which produces 5 mA cesium beams at emittances near 0.03 {pi} mm-mrad (normalized). Experiments and theory show a growth of emittance (by about a factor of 2) as these beams are accelerated through the linac. Results of recent measurements of the transverse emittance behavior of these strongly space-charge-dominated ion beams are reviewed and compared with theory. 9 refs., 3 figs.

  10. Advanced RF power sources for linacs

    SciTech Connect

    Wilson, P.B.

    1996-10-01

    In order to maintain a reasonable over-all length at high center-of-mass energy, the main linac of an electron-positron linear collider must operate at a high accelerating gradient. For copper (non-superconducting) accelerator structures, this implies a high peak power per unit length and a high peak power per RF source, assuming a limited number of discrete sources are used. To provide this power, a number of devices are currently under active development or conceptual consideration: conventional klystrons with multi-cavity output structures, gyroklystrons, magnicons, sheet-beam klystrons, multiple-beam klystrons and amplifiers based on the FEL principle. To enhance the peak power produced by an rf source, the SLED rf pulse compression scheme is currently in use on existing linacs, and new compression methods that produce a flatter output pulse are being considered for future linear colliders. This paper covers the present status and future outlook for the more important rf power sources and pulse compression systems. It should be noted that high gradient electron linacs have applications in addition to high-energy linear colliders; they can, for example, serve as compact injectors for FEL`s and storage rings.

  11. Wake fields in SLAC Linac Collimators

    SciTech Connect

    Novokhatski, Alexander; Decker, F. -J.; Smith, H.; Sullivan, M.

    2014-12-02

    When a beam travels near collimator jaws, it gets an energy loss and a transverse kick due to the backreaction of the beam field diffracted from the jaws. The effect becomes very important for an intense short bunch when a tight collimation of the background beam halo is required. In the Linac Coherent Light Source at SLAC a collimation system is used to protect the undulators from radiation due to particles in the beam halo. The halo is most likely formed from gun dark current or dark current in some of the accelerating sections. However, collimators are also responsible for the generation of wake fields. The wake field effect from the collimators not only brings an additional energy jitter and change in the trajectory of the beam, but it also rotates the beam on the phase plane, which consequently leads to a degradation of the performance of the Free Electron Laser at the Linac Coherent Light Source. In this paper, we describe a model of the wake field radiation in the SLAC linac collimators. We use the results of a numerical simulation to illustrate the model. Based on the model, we derive simple formulas for the bunch energy loss and the average kick. In addition, we also present results from experimental measurements that confirm our model.

  12. Analysis on linac quadrupole misalignment in FACET commissioning 2012

    SciTech Connect

    Sun, Yipeng; /SLAC

    2012-07-05

    In this note, the analysis on linac quadrupole misalignment is presented for the FACET linac section LI05-09 plus LI11-19. The effectiveness of the beam-based alignment technique is preliminarily confirmed by the measurement. Beam-based alignment technique was adopted at SLAC linac since SLC time. Here the beam-based alignment algorithms are further developed and applied in the FACET commissioning during 2012 run.

  13. SNS LINAC Wire Scanner System : Signal Levels and Accuracy.

    SciTech Connect

    Plum, M. A.; Christensen, W.; Myer, R. E.; Rose, C. R.

    2002-01-01

    The linac wire scanner system for the Spallation Neutron Source (SNS) at Oak Ridge, TN, USA, calls for 5 units in the medium energy beam transport (MEBT), 5 in the drift tube linac (DTL), and 10 in the coupled cavity linac (CCL). In this paper we present expected signal levels and an analysis of the error in the beam size measurement as functions of wire position and electrical signal errors.

  14. Beam position correction in the Fermilab Linac

    NASA Astrophysics Data System (ADS)

    Junck, K. L.; McCrory, E.

    1994-08-01

    Orbit correction has long been an essential feature of circular accelerators, storage rings, multipass linacs, and linear colliders. In a drift tube linear accelerator (DTL) such as the H- Linac at Fermilab, beam position monitors (BPMs) and dipole corrector magnets can only be located in between accelerating tanks. Within a tank many drift tubes (from 20 to 60) each house a quadrupole magnet to provide strong transverse focusing of the beam. With good alignment of the drift tubes and quadrupoles and a sufficiently large diameter for the drift tubes, beam position is not typically a major concern. In the Fermilab DTL, 95 percent of the beam occupies only 35 percent of the available physical aperture (4.4 cm). The recent upgrade of the Fermilab Linac from a final energy of 200 MeV to 400 MeV has been achieved by replacing four 201.25 MHz drift tube linac tanks with seven 805 MHz side-coupled cavity modules (the high energy portion of the linac or HEL). In order to achieve this increase in energy within the existing enclosure, an accelerating gradient is required that is a factor of 3 larger than that found in the DTL. This in turn required that the physical aperture through which the beam must pass be significantly reduced. In addition, the lattice of the side-coupled structure provides significantly less transverse focusing than the DTL. Therefore in the early portion of the HEL the beam occupies over 95 percent of the available physical aperture (3.0 cm). In order to prevent beam loss and the creation of excess radiation, the ability to correct beam position throughout the HEL is of importance. An orbit smoothing algorithm commonly used in the correction of closed orbits of circular machines has been implemented to achieve a global least-squares minimization of beam position errors. In order to accommodate several features of this accelerator a refinement in the algorithm has been made to increase its robustness and utilize correctors of varying strengths.

  15. Beam position correction in the Fermilab linac

    SciTech Connect

    Junck, K.L.; McCrory, E.

    1994-08-01

    Orbit correction has long been an essential feature of circular accelerators, storage rings, multipass linacs, and linear colliders. In a drift tube linear accelerator (DTL) such as the H- Linac at Fermilab, beam position monitors (BPMs) and dipole corrector magnets can only be located in between accelerating tanks. Within a tank many drift tubes (from 20 to 60) each house a quadrupole magnet to provide strong transverse focusing of the beam. With good alignment of the drift tubes and quadrupoles and a sufficiently large diameter for the drift tubes, beam position is not typically a major concern. In the Fermilab DTL, 95% of the beam occupies only 35% of the available physical aperture (4.4 cm). The recent upgrade of the Fermilab Linac from a final energy of 200 MeV to 400 MeV has been achieved by replacing four 201.25 MHz drift tube linac tanks with seven 805 MHz side-coupled cavity modules (the high energy portion of the linac or HEL). In order to achieve this increase in energy within the existing enclosure, an accelerating gradient is required that is a factor of 3 larger than that found in the DTL. This in turn required that the physical aperture through which the beam must pass be significantly reduced. In addition, the lattice of the side-coupled structure provides significantly less transverse focusing than the DTL. Therefore in the early portion of the HEL the beam occupies over 95% of the available physical aperture (3.0 cm). In order to prevent beam loss and the creation of excess radiation, the ability to correct beam position throughout the HEL is of importance. An orbit smoothing algorithm commonly used in the correction of closed orbits of circular machines has been implemented to achieve a global least-squares minimization of beam position errors. In order to accommodate several features of this accelerator a refinement in the algorithm has been made to increase its robustness and utilize correctors of varying strengths.

  16. The Transverse Linac Optics Design in Multi-pass ERL

    SciTech Connect

    Hao, Y.; Kewisch, J.; Litvinenko,V.; Pozdeyev, E.; Ptitsyn, V.; Trbojevic, D.; Tsoupas, N.

    2010-05-23

    In this paper, we analyzed the linac optics design requirement for a multi-pass energy recovery linac (ERL) for arbitrary number of linacs. A set of general formula of constrains for the 2-D transverse matrix is derived to ensure design optics acceptance matching throughout the entire accelerating and decelerating process. Meanwhile, the rest free parameters can be adjusted for fulfilling other requirements or optimization purpose. As an example, we design the linac optics for the future MeRHIC (Medium Energy eRHIC) project and show the optimization for small {beta} function.

  17. SIMULATIONS OF A MUON LINAC FOR A NEUTRINO FACTORY

    SciTech Connect

    Kevin Beard, Alex Bogacz ,Slawomir Bogacz, Vasiliy Morozov, Yves Roblin

    2011-04-01

    The Neutrino Factory baseline design involves a complex chain of accelerators including a single-pass linac, two recirculating linacs and an FFAG. The first linac follows the capture and bunching section and accelerates the muons from about 244 to 900 MeV. It must accept a high emittance beam about 30 cm wide with a 10% energy spread. This linac uses counterwound, shielded superconducting solenoids and 201 MHz superconducting cavities. Simulations have been carried out using several codes including Zgoubi, OptiM, GPT, Elegant and G4beamline, both to determine the optics and to estimate the radiation loads on the elements due to beam loss and muon decay.

  18. Designs for a Linac-Ring LHeC

    SciTech Connect

    Zimmermann, Frank; Bruning, Oliver; Ciapala, Edmond; Haug, Friedrich; Osborne, John; Schulte, Daniel; Sun, Yipeng; Tomas, Rogelio; Adolphsen, Chris; Calaga, Rama; Litvinenko, Vladimir; Chattopadhyay, Swapan; Dainton, John; Klein, Max; Eide, Anders; /Paris U., VI-VII

    2012-06-21

    We consider three scenarios for the recirculating electron linear accelerator (RLA) of a linac-ring type electron-proton collider based on the LHC (LHeC): (i) a pulsed linac with a final beam energy of 60 GeV ['p-60'], (ii) a higher luminosity configuration with two cw linacs and energy-recovery (ERL) also at 60 GeV ['erl'], and (iii) a high energy option using a pulsed linac with 140-GeV final energy ['p-140']. We discuss parameters, synchrotron radiation, footprints, and performance for the three scenarios.

  19. Electron transport of a Linac Coherent Light Source (LCLS) using the SLAC linac

    SciTech Connect

    Bane, K.L.; Raubenheimer, T.O.; Seeman, J.T.

    1993-05-01

    A linac configuration providing a low emittance high peak current electron beam is under study for a potential Linac Coherent Light Source (LCLS) based on the SLAC accelerator. The parameters of the final electron bunch are nearing the technological limits of present accelerators in both transverse and longitudinal phase space. In this note we describe a layout of the RF gun, linac, and bunch compressors to deliver the required bunch properties. We consider a bunch that is generated by an rf gun and accelerated to 7 GeV in 900 m of SLAC linac structure before it enters the wiggler. We assume that the rf gun generates a gaussian beam with an energy of 10 MeV, a population N = 6 {times} 10{sup 9}e{sup {minus}}, an rms length {sigma}{sub z} = 0.5 mm, an rms energy spread {sigma}{sub {delta}} = 0.2%, and normalized rms emittances {gamma}{epsilon}{sub x,y} = 3 mm-mrad. At the end of the linac, we require that the peak current {cflx I} {approx_gt} 2.5 kA and the peak-to-peak energy spread {Delta}{delta} {approx_lt} 0.2%. To obtain the required high peak current, we need to compress the bunch length by a factor greater than 10. In deciding at what position in the linac to compress we need to consider three issues: the longitudinal wakefield in the linac, this increases the beam`s energy spread and is harder to compensate with short bunches, the transverse wakefield and rf deflections in the linac, these increase the transverse emittance of the beam and are more severe for long bunches, and the effects of phase and current jitter which will change the bunch length and therefore the peak current of the beam. In this paper, we will describe how we compress the bunch to meet these three criteria. Then, we will briefly describe the bunch compressor optics and finally we will mention some details specific to the SLAC site.

  20. Interdigital H -mode drift-tube linac design with alternative phase focusing for muon linac

    NASA Astrophysics Data System (ADS)

    Otani, M.; Mibe, T.; Yoshida, M.; Hasegawa, K.; Kondo, Y.; Hayashizaki, N.; Iwashita, Y.; Iwata, Y.; Kitamura, R.; Saito, N.

    2016-04-01

    We have developed an interdigital H-mode (IH) drift-tube linac (DTL) design with an alternative phase focusing (APF) scheme for a muon linac, in order to measure the anomalous magnetic moment and electric dipole moment (EDM) of muons at the Japan Proton Accelerator Research Complex (J-PARC). The IH-DTL accelerates muons from β =v /c =0.08 to 0.28 at an operational frequency of 324 MHz. The output beam emittances are calculated as 0.315 π and 0.195 π mm mrad in the horizontal and vertical directions, respectively, which satisfies the experimental requirement.

  1. Linac Coherent Light Source (LCLS) at 2--4 nm using the SLAC linac

    SciTech Connect

    Seeman, J.T.; Bane, K.; Boyce, R.; Loew, G.; Morton, P.; Nuhn, H.D.; Paterson, J.; Pianetta, P.; Raubenheimer, T.; Tatchyn, R.; Vylet, V.; Winick, H.; Pellegrini, C.; Rosenzweig, J.; Travish, G.; Prosnitz, D.; Scharlemann, E.T.; Halbach, K.; Kim, K.J.; Xie, M.

    1993-08-01

    The authors describe the possible use of the SLAC linac to drive a unique, powerful, short wavelength Linac Coherent Light Source (LCLS). Using the FEL principle, lasing is achieved in a single pass of a high peak current electron beam through a long undulator by self-amplified-spontaneous-emission (SASE). The main components are a high-brightness electron RF gun with a photocathode, two electron bunch length compressors, the existing SLAC linac, beam diagnostics, and a long undulator combined with a FODO quadrupole focusing system. The RF gun, to be installed about 1 km from the end of the SLAC linac, would produce a single bunch of 6 x 10{sup 9} electrons with an invariant emittance of about 3 mm-mrad and a bunch length of about 500 {mu}m. That bunch is then accelerated to 100 MeV and compressed to a length of about 200 {mu}m. The main SLAC linac accelerates the bunch to 2 GeV were a second bunch compressor reduces the length to 30--40 {mu}m and produces a peak current of 2--3 kA. The bunch is then accelerated to 7--8 GeV and transported to a 50--70 m long undulator. Using electrons below 8 GeV, the undulator could operate at wavelengths down to 2 nm, producing about 10 GW peak power in sub-ps light pulses. At a linac repetition rate of 120 Hz, the average power is about 1 W. Linac operation at lower beam energies provides longer wavelength radiation. After the undulator, the beam is deposited in a dump. The LCLS light pulses are then distributed to multiple user stations using grazing incident mirrors. Length compression, emittance control, phase stability, FEL design criteria, and parameter tolerances are discussed. A demonstration experiment is also described which uses the SLAC linac and (possibly) the PALADIN undulator to study SASE to power saturation at wavelengths of 40--360 nm.

  2. Optical emission spectroscopy of the Linac4 and superconducting proton Linac plasma generators.

    PubMed

    Lettry, J; Fantz, U; Kronberger, M; Kalvas, T; Koivisto, H; Komppula, J; Mahner, E; Schmitzer, C; Sanchez, J; Scrivens, R; Midttun, O; Myllyperkiö, P; O'Neil, M; Pereira, H; Paoluzzi, M; Tarvainen, O; Wünderlich, D

    2012-02-01

    CERN's superconducting proton Linac (SPL) study investigates a 50 Hz high-energy, high-power Linac for H(-) ions. The SPL plasma generator is an evolution of the DESY ion source plasma generator currently operated at CERN's Linac4 test stand. The plasma generator is a step towards a particle source for the SPL, it is designed to handle 100 kW peak RF-power at a 6% duty factor. While the acquisition of an integrated hydrogen plasma optical spectrum is straightforward, the measurement of a time-resolved spectrum requires dedicated amplification schemes. The experimental setup for visible light based on photomultipliers and narrow bandwidth filters and the UV spectrometer setup are described. The H(α), H(β), and H(γ) Balmer line intensities, the Lyman band and alpha transition were measured. A parametric study of the optical emission from the Linac4 ion source and the SPL plasma generator as a function of RF-power and gas pressure is presented. The potential of optical emission spectrometry coupled to RF-power coupling measurements for on-line monitoring of short RF heated hydrogen plasma pulses is discussed. PMID:22380238

  3. Design of the SLC damping ring to linac transport lines

    SciTech Connect

    Fieguth, T.H.; Murray, J.J.

    1983-07-01

    The first and second order optics for the damping ring to linac transport line are designed to preserve the damped transverse emittance while simultaneously compressing the bunch length of the beam to that length required for reinjection into the linac. This design, including provisions for future control of beam polarization, is described.

  4. Production of slow-positron beams with an electron linac

    SciTech Connect

    Howell, R.H.; Alvarez, R.A.; Stanek, M.

    1982-03-26

    Intense, pulsed beams of low-energy positrons have been produced by a high-energy beam from an electron linac. The production efficiency for low-energy positrons has been determined for electrons with 60 to 120 MeV energy, low-energy positron beams from a linac can be of much higher intensity than those beams currently derived from radioactive sources.

  5. MEIC Proton Beam Formation with a Low Energy Linac

    SciTech Connect

    Zhang, Yuhong

    2015-09-01

    The MEIC proton and ion beams are generated, accumulated, accelerated and cooled in a new green-field ion injector complex designed specifically to support its high luminosity goal. This injector consists of sources, a linac and a small booster ring. In this paper we explore feasibility of a short ion linac that injects low-energy protons and ions into the booster ring.

  6. Laser system for a subpicosecond electron linac.

    SciTech Connect

    Crowell, R. A.

    1998-09-25

    At the Argonne Chemistry Division efforts are underway to develop a sub-picosecond electron beam pulse radiolysis facility for chemical studies. The target output of the accelerator is to generate electron pulses that can be adjusted from 3nC in .6ps to 100nC in 45ps. In conjunction with development of the accelerator a state-of-the-art ultrafast laser system is under construction that will drive the linac's photocathode and provide probe pulses that are tunable from the UV to IR spectral regions.

  7. High density harp for SSCL linac

    SciTech Connect

    Fritsche, C.T.; Krogh, M.L.; Crist, C.E.

    1993-05-01

    AlliedSignal Inc., Kansas City Division, and the Superconducting Super Collider Laboratory (SSCL) are collaboratively developing a high density harp for the SSCL linac. This harp is designed using hybrid microcircuit (HMC) technology to obtain a higher wire density than previously available. The developed harp contains one hundred twenty-eight 33-micron-diameter carbon wires on 0.38-mm centers. The harp features an onboard broken wire detection circuit. Carbon wire preparation and attachment processes were developed. High density surface mount connectors were located. The status of high density harp development will be presented along with planned future activities.

  8. An overview of LINAC ion sources

    SciTech Connect

    Keller, Roderich

    2008-01-01

    This paper discusses ion sources used in high-duty-factor proton and H{sup -} Linacs as well as in accelerators utilizing multi-charged heavy ions, mostly for nuclear physics applications. The included types are Electron Cyclotron Resonance (ECR) sources as well as filament and rf driven multicusp sources. The paper does not strive to attain encyclopedic character but rather to highlight major lines of development, peak performance parameters and type-specific limitations and problems of these sources. The main technical aspects being discussed are particle feed, plasma generation and ion production by discharges, and plasma confinement.

  9. Numerical simulation of coupler cavities for linacs

    SciTech Connect

    Ng, C.K.; Derutyer, H.; Ko, K.

    1993-04-01

    We present numerical procedures involved in the evaluation of the performance of coupler cavities for linacs. The MAFIA code is used to simulate an X-Band accelerator section in the time domain. The input/output coupler cavities for the structure arc of the symmetrical double-input design. We calculate the transmission properties of the coupler and compare the results with measurements. We compare the performance of the symmetrical double-input design with that of the conventional single-input type by evaluating the field amplitude and phase asymmetries. We also evaluate the peak field gradient in the computer.

  10. Superconducting radiofrequency linac development at Fermilab

    SciTech Connect

    Holmes, Stephen D.; /Fermilab

    2009-10-01

    As the Fermilab Tevatron Collider program draws to a close, a strategy has emerged of an experimental program built around the high intensity frontier. The centerpiece of this program is a superconducting H- linac that will support world leading programs in long baseline neutrino experimentation and the study of rare processes. Based on technology shared with the International Linear Collider, Project X will provide multi-MW beams at 60-120 GeV from the Main Injector, simultaneous with very high intensity beams at lower energies. Project X also supports development of a Muon Collider as a future facility at the energy frontier.

  11. Physics design of front ends for superconducting ion linacs

    SciTech Connect

    Ostroumov, P.N.; Carneiro, J.P.; /Fermilab

    2009-01-01

    Superconducting (SC) technology is the only option for CW linacs and is also an attractive option for pulsed linacs. SC cavities are routinely used for proton and H{sup -} beam acceleration above 185 MeV. Successful development of SC cavities covering the lower velocity range (down to 0.03c) is a very strong basis for the application of SC structures in the front ends of high energy linacs. Lattice design and related high-intensity beam physics issues in a {approx}400 MeV linac that uses SC cavities will be presented in this talk. In particular, axially-symmetric focusing by SC solenoids provides strong control of beam space-charge and a compact focusing lattice. As an example, we discuss the SC front-end of the H{sup -} linac for the FNAL Proton Driver.

  12. 10MeV 25KW industrial electron LINAC

    NASA Astrophysics Data System (ADS)

    Kamino, Y.

    1998-06-01

    A 10MeV 25KW plus class electron LINAC was developed for sterilisation of medical devices. The LINAC composed of a standing wave type single cavity prebuncher and a 2m electro-plated travelling wave guide uses a 5MW 2856MHz pulse klystron as an RF source and provides 25KW beam power at the Ti alloy beam window stably after the energy analysing magnet with 10MeV plus-minus 1 MeV energy slit. The practical maximum beam power reached 29 KW and this demonstrated the LINAC as one of the most powerful S-band electron LINACs in the world. The control of the LINAC is fully automated and the "One-Button Operation" is realised, which is valuable for easy operation as a plant system. 2 systems have been delivered and are being operated stably.

  13. RIA Superconducting Drift Tube Linac R & D

    SciTech Connect

    J. Popielarski; J. Bierwagen; S. Bricker; C. Compton; J. DeLauter; P. Glennon; T. Grimm; W. Hartung; D. Harvell; M. Hodek; M. Johnson; F. Marti; P. Miller; A. Moblo; D. Norton; L. Popielarski; J. Wlodarczak; R. C. York; A. Zeller

    2009-05-22

    Cavity and cryomodule development work for a superconducting ion linac has been underway for several years at the National Superconducting Cyclotron Laboratory. The original application of the work was the proposed Rare Isotope Accelerator. At present, the work is being continued for use with the Facility for Rare Isotope Beams (FRIB). The baseline linac for FRIB requires 4 types of superconducting cavities to cover the velocity range needed to accelerate an ion beam to 200 MeV/u: 2 types of quarter-wave resonator (QWR) and 2 types of half-wave resonator (HWR). Superconducting solenoids are used for focussing. Active and passive shielding is required to ensure that the solenoids’ field does not degrade the cavity performance. First prototypes of both QWR types and one HWR type have been fabricated and tested. A prototype solenoid has been procured and tested. A test cryomodule has been fabricated and tested. The test cryomodule contains one QWR, one HWR, one solenoid, and one super-ferric quadrupole. This report covers the design, fabrication, and testing of this cryomodule

  14. SSC Linac Beam Position Monitor System

    NASA Astrophysics Data System (ADS)

    Aiello, G. Roberto; Jones, Alan A.; Mills, Mark R.

    1994-10-01

    The Superconducting Super Collider (SSC), Linac Beam Position Monitor System is designed to measure beam position and phase. Forty-three monitors will be installed in the Linac and Transfer Line. The position measurement provides information on the transverse beam position in the beam pipe with respect to a mechanical reference. The phase measurement provides information on the difference between the longitudinal phase of the beam and the radio frequency reference signal (rf reference), to be used for phase scanning and time of flight measurement. The system design and the prototypes are complete, and the series is under fabrication. The signals to be processed are extracted from four striplines, down-converted to a convenient intermediate frequency and fed into position and phase electronics. The position electronics is realized with the log-ratio technique, and the phase electronics uses a new digital technique that overcomes most of the problems of existing systems. Both position and phase analog electronics are mounted on identical VXI motherboards, containing analog-to-digital converters (ADC's) and digital circuitry.

  15. Linac-driven spallation-neutron source

    SciTech Connect

    Jason, A.J.

    1995-05-01

    Strong interest has arisen in accelerator-driven spallation-neutron sources that surpass existing facilities (such as ISIS at Rutherford or LANSCE at Los Alamos) by more than an order of magnitude in beam power delivered to the spallation target. The approach chosen by Los Alamos (as well as the European Spallation Source) provides the full beam energy by acceleration in a linac as opposed to primary acceleration in a synchrotron or other circular device. Two modes of neutron production are visualized for the source. A short-pulse mode produces 1 MW of beam power (at 60 pps) in pulses, of length less than 1 ms, by compression of the linac macropulse through multi-turn injection in an accumulator ring. A long-pulse mode produces a similar beam power with 1-ms-long pulses directly applied to a target. This latter mode rivals the performance of existing reactor facilities to very low neutron energies. Combination with the short-pulse mode addresses virtually all applications.

  16. Linac Coherent Light Source - Status and Prospects

    SciTech Connect

    Galayda, John N.; /SLAC

    2005-11-09

    The Linac Coherent Light Source (LCLS) Project will be an x-ray free-electron laser. It is intended to produce pulses of 800-8,000 eV photons. Each pulse, produced with a repetition frequency of up to 120 Hz, will provide >10{sup 12} photons within a duration of less than 200 femtoseconds. The project employs the last kilometer of the SLAC linac to provide a low-emittance electron beam in the energy range 4-14 GeV to a single undulator. Two experiment halls, located 100m and 350m from the undulator exit, will house six experiment stations for research in atomic/molecular physics, pump-probe dynamics of materials and chemical processes, x-ray imaging of clusters and complex molecules, and plasma physics. Engineering design activities began in 2003, and the project is to be completed in March 2009. The project design permits straightforward expansion of the LCLS to multiple undulators.

  17. Short wavelength FELs using the SLAC linac

    SciTech Connect

    Winick, H.; Bane, K.; Boyce, R.

    1993-08-01

    Recent technological developments have opened the possibility to construct a device which we call a Linac Coherent Light Source (LCLS); a fourth generation light source, with brightness, coherence, and peak power far exceeding other sources. Operating on the principle of the free electron laser (FEL), the LCLS would extend the range of FEL operation to much aborter wavelength than the 240 mn that has so far been reached. We report the results of studies of the use of the SLAC linac to drive an LCLS at wavelengths from about 3-100 nm initially and possibly even shorter wavelengths in the future. Lasing would be achieved in a single pass of a low emittance, high peak current, high energy electron beam through a long undulator. Most present FELs use an optical cavity to build up the intensity of the light to achieve lasing action in a low gain oscillator configuration. By eliminating the optical cavity, which is difficult to make at short wavelengths, laser action can be extended to shorter wavelengths by Self-Amplified-Spontaneous-Emission (SASE), or by harmonic generation from a longer wavelength seed laser. Short wavelength, single pass lasers have been extensively studied at several laboratories and at recent workshops.

  18. Features Of The J-PARC Linac

    SciTech Connect

    Kobayashi, Tetsuya

    2011-06-01

    Japan Proton Accelerator Research Complex (J-PARC) will be one of the highest intensity proton accelerators in the world aiming to realize 1 MW class of the beam power. The accelerator consists of a 400-MeV linac, a 3-GeV rapid-cycling synchrotron (RCS) and a main ring synchrotron (MR), and the accelerated beam is applied to several experimental facilities. The linac, which is the injector for the RCS, has about 50 cavity modules to accelerate the beam up to 400 MeV. The acceleration field error in all of them should be within {+-}1% in amplitude and {+-}1 degree in phase because the momentum spread of the RCS injection beam is required to be within 0.1%. For the cavity field stabilization, a high-stable optical signal distribution system is used as the RF reference, and sophisticated digital feedback and feed-forward system is working well in the low level RF control system. Consequently the providing beam to the RCS is very stable, and the beam commissioning and the experiments of the application facilities have been progressed steadily.

  19. SSC Linac Beam Position Monitor System

    SciTech Connect

    Aiello, G.R.; Jones, A.A.; Mills, M.R. )

    1994-10-10

    The Superconducting Super Collider (SSC), Linac Beam Position Monitor System is designed to measure beam position and phase. Forty-three monitors will be installed in the Linac and Transfer Line. The position measurement provides information on the transverse beam position in the beam pipe with respect to a mechanical reference. The phase measurement provides information on the difference between the longitudinal phase of the beam and the radio frequency reference signal (rf reference), to be used for phase scanning and time of flight measurement. The system design and the prototypes are complete, and the series is under fabrication. The signals to be processed are extracted from four striplines, down-converted to a convenient intermediate frequency and fed into position and phase electronics. The position electronics is realized with the log-ratio technique, and the phase electronics uses a new digital technique that overcomes most of the problems of existing systems. Both position and phase analog electronics are mounted on identical VXI motherboards, containing analog-to-digital converters (ADC's) and digital circuitry.

  20. BEAM LOSS MECHANISMS IN HIGH INTENSITY LINACS

    SciTech Connect

    Plum, Michael A

    2012-01-01

    In the present operation of the Oak Ridge Spallation Neutron Source, 60-Hz, 825-us H beam pulses are accelerated to 910 MeV, and then compressed to less than a microsecond in the storage ring, to deliver 1 MW of beam power to the spallation target. The beam loss in the superconducting portion of the linac is higher than expected, and it has shown a surprising counter-intuitive correlation with quadrupole magnetic fields, with a loss minimum occurring when the quadrupoles are set to approximately half their design values. This behavior can now be explained by a recent set of experiments that show the beam loss is primarily due to intra-beam stripping. Beam halo is another important beam loss contributor, and collimation in the 2.5 MeV Medium Energy Beam Transport has proven to be an effective mitigation strategy. In this presentation, we will summarize these and other beam loss mechanisms that are important for high intensity linacs.

  1. PHYSICS RESULTS OF THE NSLS-II LINAC FRONT END TEST STAND

    SciTech Connect

    Fliller R. P.; Gao, F.; Yang, X.; Rose, J.; Shaftan, T.; Piel, C

    2012-05-20

    The Linac Front End Test Stand (LFETS) was installed at the Source Development Laboratory (SDL) in the fall of 2011 in order to test the Linac Front End. The goal of these tests was to test the electron source against the specifications of the linac. In this report, we discuss the results of these measurements and the effect on linac performance.

  2. Computation of Normal Conducting and Superconducting Linear Accelerator (LINAC) Availabilities

    SciTech Connect

    Haire, M.J.

    2000-07-11

    A brief study was conducted to roughly estimate the availability of a superconducting (SC) linear accelerator (LINAC) as compared to a normal conducting (NC) one. Potentially, SC radio frequency cavities have substantial reserve capability, which allows them to compensate for failed cavities, thus increasing the availability of the overall LINAC. In the initial SC design, there is a klystron and associated equipment (e.g., power supply) for every cavity of an SC LINAC. On the other hand, a single klystron may service eight cavities in the NC LINAC. This study modeled that portion of the Spallation Neutron Source LINAC (between 200 and 1,000 MeV) that is initially proposed for conversion from NC to SC technology. Equipment common to both designs was not evaluated. Tabular fault-tree calculations and computer-event-driven simulation (EDS) computer computations were performed. The estimated gain in availability when using the SC option ranges from 3 to 13% under certain equipment and conditions and spatial separation requirements. The availability of an NC LINAC is estimated to be 83%. Tabular fault-tree calculations and computer EDS modeling gave the same 83% answer to within one-tenth of a percent for the NC case. Tabular fault-tree calculations of the availability of the SC LINAC (where a klystron and associated equipment drive a single cavity) give 97%, whereas EDS computer calculations give 96%, a disagreement of only 1%. This result may be somewhat fortuitous because of limitations of tabular fault-tree calculations. For example, tabular fault-tree calculations can not handle spatial effects (separation distance between failures), equipment network configurations, and some failure combinations. EDS computer modeling of various equipment configurations were examined. When there is a klystron and associated equipment for every cavity and adjacent cavity, failure can be tolerated and the SC availability was estimated to be 96%. SC availability decreased as

  3. PERFORMANCE OF THE DIAGNOSTICS FOR NSLS-II LINAC COMMISSIONING

    SciTech Connect

    Fliller III, R.; Padrazo, D.; Wang, G.M.; Heese, R.; Hseuh H.-C.; Johanson, M.; Kosciuk, B.N.; Pinayev, I.; Rose, J.; Shaftan, T.; Singh, O.

    2011-03-28

    The National Synchrotron Light Source II (NSLS-II) is a state of the art 3-GeV third generation light source currently under construction at Brookhaven National Laboratory. The NSLS-II injection system consists of a 200 MeV linac, a 3-GeV booster synchrotron and associated transfer lines. The transfer lines not only provide a means to deliver the beam from one machine to another, they also provide a suite of diagnostics and utilities to measure the properties of the beam to be delivered. In this paper we discuss the suite of diagnostics that will be used to commission the NSLS-II linac and measure the beam properties. The linac to booster transfer line can measure the linac emittance with a three screens measurement or a quadrupole scan. Energy and energy spread are measured in a dispersive section. Total charge and charge uniformity are measured with wall current monitors in the linac and transformers in the transfer line. We show that the performance of the diagnostics in the transfer line will be sufficient to ensure the linac meets its specifications and provides a means of trouble shooting and studying the linac in future operation.

  4. Simulation studies of the LAMPF proton linac

    SciTech Connect

    Garnett, R.W.; Gray, E.R.; Rybarcyk, L.J.; Wangler, T.P.

    1995-05-01

    The LAMPF accelerator consists of two 0.75-MeV injectors, one for H{sup +} and the other for H{sup {minus}}, a separate low-energy beam transport (LEBT) line for each beam species, a 0.75 to 100-MeV drift-tube linac (DTL) operating at 201.25-MHz, a 100-MeV transition region (TR), and a 100 to 800-MeV side-coupled linac (SCL) operating at 805-MHz. Each LEBT line consists of a series of quadrupoles to transport and transversely match the beam. The LEBT also contains a prebuncher, a main buncher, and an electrostatic deflector. The deflector is used to limit the fraction of a macropulse which is seen by the beam diagnostics throughout the linac. The DTL consists of four rf tanks and uses singlet FODO transverse focusing. The focusing period is doubled in the last two tanks by placing a quadrupole only in every other drift-tube. Doublet FDO transverse focusing is used in the SCL. The TR consists of separate transport lines for the H{sup +} and H{sup {minus}} beams. The pathlengths for the two beams differ, by introducing bends, so as to delay arrival of one beam relative to the other and thereby produce the desired macropulse time structure. Peak beam currents typically range from 12 to 18-mA for varying macropulse lengths which give an average beam current of 1-mA. The number of particles per bunch is of the order 10{sup 8}. The work presented here is an extension of previous work. The authors have attempted to do a more complete simulation by including modeling of the LEBT. No measurements of the longitudinal structure of the beam, except phase-scans, are performed at LAMPF. The authors show that, based on simulation results, the primary causes of beam spill are inefficient longitudinal capture and the lack of longitudinal matching. Measurements to support these claims are not presently made at LAMPF. However, agreement between measurement and simulation for the transverse beam properties and transmissions serve to benchmark the simulations.

  5. The upgrade of the Brookhaven Linac Isotope Producer (BLIP) and the BNL Linac

    SciTech Connect

    Mausner, L.F.; Alessi, J.G.

    1996-12-31

    An upgrade project was recently completed on the 200 MeV H{sup -} linac and the Brookhaven Linac Isotope Producer (BLIP) in order to improve radioisotope production capacity and reliability. The average beam current has increased from 60 {mu}A to 150 {mu}A. The increased average current is the result of increases in peak current, from 25 mA to 37 mA, pulse repetition rate, from 5 to 7.5 Hz, and pulse width, from 500 to 530 ps. To achieve this performance the 35 keV, 750 keV and 200 MeV beam transport were improved, the RF transmission lines and RF power supplies replaced. Improvements to the linac control system, and the optics and vacuum system of the 200 MeV transport were implemented. A BLIP the target cooling system was upgraded to 35 kW and automated, the targets, and target mechanical systems replaced with a more robust design, and the control system upgraded. With these enhancements BLIP is ready to address the lack of availability of accelerator produced medical and research isotopes.

  6. R&D Energy Recovery Linac at Brookhaven National Laboratory

    SciTech Connect

    Litvinenko, Vladimir; Beavis, D.; Ben-Zvi, Ilan; Blaskiewicz, Michael; Burrill, Andrew; Calaga, Rama; Cameron, Peter; Chang, Xiangyun; Drees, K.A.; Ganetis, G.; Gamble, Michael; Hahn, H.; Hammons, L.R.; Hershcovitch, A.; Hseuh, H.C.; Jain, A.K.; Kayran, A.; Kewisch, Jorg; Lambiase, R.F.; Lederle, D.L.; Mahler, G.J.; McIntyre, G.; Meng, W.; Nehring, T.C.; Oerter, B.; Pai, C.; Pate, D.; Phillips, Daniel; Pozdeyev, Eduard; Rao, Triveni; Reich, J.; Roser, Thomas; Russo, T.; Smith, K.; Tuozzolo, Joseph; Weiss, D.; Williams, N.W.W.; Yip, Kin; Zaltsman, A.; Bluem, Hans; Cole, Michael; Favale, Anthony; Holmes, D.; Rathke, John; Schultheiss, Tom; Delayen, Jean; Funk, L.; Phillips, H.; Preble, Joseph

    2008-07-01

    Collider Accelerator Department at BNL is in the final stages of developing the 20-MeV R&D energy recovery linac with super-conducting 2.5 MeV RF gun and single-mode super-conducting 5-cell RF linac. This unique facility aims to address many outstanding questions relevant for high current (up to 0.5 A of average current), high brightness energy-recovery linacs with novel Zigzag-type merger. We present the performance of the R&D ERL elements and detailed commissioning plan.

  7. Using basic electromagnetism to introduce LINAC4 (CERN)

    NASA Astrophysics Data System (ADS)

    Cid-Vidal, Xabier; Cid, Ramon; Vretenar, Maurizio

    2016-07-01

    The LHC is the last element of CERN’s accelerator complex, which is a succession of machines with increasingly higher energies. Everything starts in the 50 MeV linear accelerator (LINAC2), but a new linear accelerator, the 160 MeV LINAC4, will replace LINAC2 in 2018, upgrading LHC injectors to higher intensity and eventually increasing the luminosity of LHC. The aim of this article is briefly introducing this new accelerator, and presenting a simple application of some fundamental laws of magnetism to be taken to the secondary school classrooms.

  8. High-Performance Beam Simulator for the LANSCE Linac

    SciTech Connect

    Pang, Xiaoying; Rybarcyk, Lawrence J.; Baily, Scott A.

    2012-05-14

    A high performance multiparticle tracking simulator is currently under development at Los Alamos. The heart of the simulator is based upon the beam dynamics simulation algorithms of the PARMILA code, but implemented in C++ on Graphics Processing Unit (GPU) hardware using NVIDIA's CUDA platform. Linac operating set points are provided to the simulator via the EPICS control system so that changes of the real time linac parameters are tracked and the simulation results updated automatically. This simulator will provide valuable insight into the beam dynamics along a linac in pseudo real-time, especially where direct measurements of the beam properties do not exist. Details regarding the approach, benefits and performance are presented.

  9. Radiation processing with the Messina electron linac

    NASA Astrophysics Data System (ADS)

    Auditore, L.; Barnà, R. C.; De Pasquale, D.; Emanuele, U.; Loria, D.; Morgana, E.; Trifirò, A.; Trimarchi, M.

    2008-05-01

    In the last decades radiation processing has been more and more applied in several fields of industrial treatments and scientific research as a safe, reliable and economic technique. In order to improve existing industrial techniques and to develop new applications of this technology, at the Physics Department of Messina University a high power 5 MeV electron linac has been studied and set-up. The main features of the accelerating structure will be described together with the distinctive features of the delivered beam and several results obtained by electron beam irradiations, such as improvement of the characteristics of polymers and polymer composite materials, synthesis of new hydrogels for pharmaceutical and biomedical applications, reclaim of culture ground, sterilization of medical devices, development of new dosimeters for very high doses and dose rates required for monitoring of industrial irradiations.

  10. Energy Recovery Linacs for Light Source Applications

    SciTech Connect

    George Neil

    2011-04-01

    Energy Recovery Linacs are being considered for applications in present and future light sources. ERLs take advantage of the continuous operation of superconducting rf cavities to accelerate high average current beams with low losses. The electrons can be directed through bends, undulators, and wigglers for high brightness x ray production. They are then decelerated to low energy, recovering power so as to minimize the required rf drive and electrical draw. When this approach is coupled with advanced continuous wave injectors, very high power, ultra-short electron pulse trains of very high brightness can be achieved. This paper will review the status of worldwide programs and discuss the technology challenges to provide such beams for photon production.

  11. Neutron Spectra in a 15 MV LINAC

    SciTech Connect

    Vega-Carrillo, H. R.; Chu, Wei-Han; Tung, Chuan-Jong; Lan, Jen-Hong

    2010-12-07

    Neutron spectra were calculated inside the treatment hall of a 15 MV LINAC, calculations were carried out using Monte Carlo methods. With a Bonner sphere spectrometer with pairs of thermoluminiscent dosimeters the neutron spectrum at 100 cm from the isocenter was measured and compared with the calculated spectrum. All the spectra in the treatment hall show the presence of evaporation and knock-on neutrons; also the room-return due to the hall features is shown. In the maze the large contribution are due to epithermal and thermal neutrons. A good agreement between the calculated and measured spectrum at 100 cm was noticed, from this comparison the differences are attributed to the water content in the concrete of the hall.

  12. Recirculating Linac Accelerators For Future Muon Facilities

    SciTech Connect

    Yves Roblin, Alex Bogacz, Vasiliy Morozov, Kevin Beard

    2012-04-01

    Neutrino Factories (NF) and Muon Colliders (MC) require rapid acceleration of shortlived muons to multi-GeV and TeV energies. A Recirculating Linear Accelerator (RLA) that uses superconducting RF structures can provide exceptionally fast and economical acceleration to the extent that the focusing range of the RLA quadrupoles allows each muon to pass several times through each high-gradient cavity. A new concept of rapidly changing the strength of the RLA focusing quadrupoles as the muons gain energy is being developed to increase the number of passes that each muon will make in the RF cavities, leading to greater cost effectiveness. We discuss the optics and technical requirements for RLA designs, using RF cavities capable of simultaneous acceleration of both m+ and m- species. The design will include the optics for the multi-pass linac and droplet-shaped return arcs.

  13. Permanent-magnet quadrupoles in RFQ Linacs

    SciTech Connect

    Lysenko, W.P.; Wang, T.F.

    1985-10-01

    We investigated the possibility of increasing the current-carrying capability of radio-frequency quadrupole (RFQ) linear accelerators by adding permanentmagnet quadrupole (PMQ) focusing to the existing transverse focusing provided by the rf electric field. Increased transverse focusing would also allow shortening RFQ linacs by permitting a larger accelerating gradient, which is normally accompanied by an undesirable increased transverse rf defocusing effect. We found that PMQs were not helpful in increasing the transverse focusing strength in an RFQ. This conclusion was reached after some particle tracing simulations and some analytical calculations. In our parameter regime, the addition of the magnets increases the betatron frequency but does not result in improved focusing because the increased flutter more than offsets the gain from the increased betatron frequency.

  14. BEAM HALO IN PROTON LINAC BEAMS

    SciTech Connect

    T. WANGLER; K. CRANDALL

    2000-08-01

    In this paper we review the present picture of km halo in proton linacs. Space-charge forces acting in mismatched beams have been identified as a major cause of beam-halo. We present a definition of halo based on a ratio of moments of the distribution of the beam coordinates. We find from our initial studies that for halo detined in this way, a beam can have rms emittance growth without halo growth, but halo growth is always accompanied by rms emittance growth. We describe the beam-halo experiment that is in preparation at Los Alamos, which will address questions about the beam profiles, maximum particle amplitudes, and rms emittance growth associated with the halo.

  15. A Program for Optimizing SRF Linac Costs

    SciTech Connect

    Powers, Thomas J.

    2013-04-01

    Every well-designed machine goes through the process of cost optimization several times during its design, production and operation. The initial optimizations are done during the early proposal stage of the project when none of the systems have been engineered. When a superconducting radio frequency (SRF) linac is implemented as part of the design, it is often a difficult decision as to the frequency and gradient that will be used. Frequently, such choices are made based on existing designs, which invariably necessitate moderate to substantial modifications so that they can be used in the new accelerator. Thus the fallacy of using existing designs is that they will frequently provide a higher cost machine or a machine with sub-optimal beam physics parameters. This paper describes preliminary results of a new software tool that allows one to vary parameters and understand the effects on the optimized costs of construction plus 10 year operations of an SRF linac, the associated cryogenic facility, and controls, where operations includes the cost of the electrical utilities but not the labor or other costs. It derives from collaborative work done with staff from Accelerator Science and Technology Centre, Daresbury, UK [1] several years ago while they were in the process of developing a conceptual design for the New Light Source project. The initial goal was to convert a spread sheet format to a graphical interface to allow the ability to sweep different parameter sets. The tools also allow one to compare the cost of the different facets of the machine design and operations so as to better understand the tradeoffs.

  16. RF linac designs with beams in thermal equilibrium

    NASA Astrophysics Data System (ADS)

    Reiser, Martin; Brown, Nathan

    1996-06-01

    Beams in conventional radio-frequency linear accelerators (rf linacs) usually have a transverse temperature which is much larger than the longitudinal temperature. With high currents, space charge forces couple the transverse and longitudinal particle motions, driving the beam toward thermal equilibrium, which leads to emittance growth and halo formation. A design strategy is proposed in which the beam has equal transverse and longitudinal temperatures through the entire linac, avoiding these undesirable effects. For such equipartitioned linac beams, simple analytical relationships can be derived for the bunch size, tune depression, and other parameters as a function of beam intensity, emittance, and external focusing. These relations were used to develop three conceptual designs for a 938 MeV, 100 mA proton linac with different tune depressions, which are presented in this paper.

  17. 1-GeV Linac Upgrade Study at Fermilab

    SciTech Connect

    Popovic, M., Moretti, A., Noble, R., Schmidt, C. W., FNAL

    1998-09-01

    A linac injector for a new proton source complex at Fermilab is assumed to have a kinetic energy of 1 GeV. This linac would be sized to accelerate 100 mA of H{sup -} beam in a 200 microsecond pulse at a 15 Hz repetition rate. This would be adequate to produce {approximately}10{sup 14} protons per pulse allowing for future improvements of the new proton source complex. An alternate proposal is to add 600 MeV of side coupled cavity linac at 805 MHz to the existing 400 MeV Linac. This addition may either be in a new location or use the present Booster tunnel. A discussion of these possibilities will be given.

  18. Design of the driver linac for the Rare Isotope Accelerator.

    SciTech Connect

    Ostroumov, P. N.; Nolen, J. A.; Shepard, K. W.; Physics

    2006-01-01

    The proposed design of the Rare Isotope Accelerator (RIA) driver linac is a cw, fully superconducting, 1.4 GV linac capable of accelerating uranium ions up to 400 MeV/u and protons to 1 GeV with 400 kW beam power. An extensive research and development effort has resolved many technical issues related to the construction of the driver linac and other systems of the RIA facility. In particular, record intensities of heavy ion beams have been demonstrated with the ECR ion source VENUS at LBNL, the driver front end systems including two-charge-state Low Energy Beam Transport (LEBT) and RFQ are being tested, and a set of SC accelerating structures to cover velocity range from 0.02c to 0.7c have been developed and prototyped. Newly developed high-performance SC cavities will provide the required voltage for the driver linac using 300 cavities designed for six different geometrical betas.

  19. Commissioning of the LCLS Linac and Bunch Compressors

    SciTech Connect

    Akre, R.; Brachmann, A.; Decker, F.-J.; Ding, Y.; Dowell, D.; Emma#, P.; Frisch, J.; Gilevich, S.; Hays, G.; Hering, Ph.; Huang, Z.; Iverson, R.; Limborg-Deprey, C.; Loos, H.; Molloy, S.; Miahnahri, A.; Nuhn, H.-D.; Ratner, D.; Turner, J.; Welch, J.; White, W.; /SLAC

    2008-08-20

    The Linac Coherent Light Source (LCLS) is a SASE x-ray Free-Electron Laser (FEL) project under construction at SLAC [1]. The injector section, from drive-laser and RF photocathode gun through the first bunch compressor, was commissioned in the spring and summer of 2007. The second phase of commissioning, including the second bunch compressor and various main linac modifications, was completed in January through August of 2008. We report here on experience gained during this second phase of machine commissioning, including the injector, the first and second bunch compressor stages, the linac up to 14 GeV, and beam stability measurements. The final commissioning phase, including the undulator and the long transport line from the linac, is set to begin in December 2008, with first light expected in July 2009.

  20. A Radiation shielding study for the Fermilab Linac

    SciTech Connect

    Rakhno, I.; Johnstone, C.; /Fermilab

    2006-02-01

    Radiation shielding calculations are performed for the Fermilab Linac enclosure and gallery. The predicted dose rates around the access labyrinth at normal operation and a comparison to measured dose rates are presented. An accident scenario is considered as well.

  1. Effect of cooling water on stability of NLC linac components

    SciTech Connect

    F. Le Pimpec et al.

    2003-02-11

    Vertical vibration of linac components (accelerating structures, girders and quadrupoles) in the NLC has been studied experimentally and analytically. Effects such as structural resonances and vibration caused by cooling water both in accelerating structures and quadrupoles have been considered. Experimental data has been compared with analytical predictions and simulations using ANSYS. A design, incorporating the proper decoupling of structure vibrations from the linac quadrupoles, is being pursued.

  2. High power operational experience with the LANSCE Linac

    SciTech Connect

    Rybarcyk, Lawrence J

    2008-01-01

    The heart of the Los Alamos Neutron Science Center (LANSCE) is a pulsed linear accelerator that is used to simultaneously provide H+ and H- beams to several user facilities. This accelerator contains two Cockcroft-Walton style injectors, a 100-MeV drift tube linac and an 800-MeV coupled cavity linac. This presentation will touch on various aspects of the high power operation including performance, tune-up strategy, beam losses and machine protection.

  3. Evolution of the 400 MeV linac design

    SciTech Connect

    MacLachlan, J.A.

    1987-11-09

    The basic premises of the conceptual design for the linac upgrade are pursued to establish lengths, gradients, power dissipation, etc., for the 400 MeV linac and matching section. The discussion is limited to accelerating and focusing components. Wherever values depend on the choice of the accelerating structure, the disk-and-washer structure is emphasized; the results are generally relevant to the side coupled cavity choice also.

  4. Beam dynamics aspects for the APT integrated linac

    SciTech Connect

    Nath, S.; Gray, E.R.; Wangler, T.P.

    1997-08-01

    The accelerator-based production of tritium calls for a high-power cw proton linac. The current Los Alamos design uses an integrated approach in terms of accelerating structure. The front part of the accelerator uses normal-conducting (NC) structures while most (>80%) of the linac structure is superconducting (SC). Here, the authors report the beam-dynamics rationale used in the integrated design and present particle simulation results.

  5. A design approach for superconducting high-current ion linacs

    SciTech Connect

    Garnett, R.W.; Wangler, T.P.

    1996-09-01

    An approach for designing superconducting high-current ion linacs is described. This approach takes advantage of the large velocity acceptance of high-gradient cavities with a small number of cells. It is well known that this feature leads to a linac design with great operational flexibility. Algorithms which have been incorporated into a design code and a beam dynamics code are discussed. Simulation results using these algorithms are also presented.

  6. The 400 MeV Linac Upgrade at Fermilab

    SciTech Connect

    Noble, R.J.

    1992-12-01

    The Fermilab Linac Upgrade in planned to increase the energy of the H{sup {minus}} linac from 200 to 400 MeV. This is intended to reduce the incoherent space-charge tuneshift at injection into the 8 GeV Booster which limit either the brightness or the total intensity of the beam. The Linac Upgrade will be achieved by replacing the last four 201.25 MHs drift-tube linac (DTL) tanks which accelerate the beam from 116 to 200 MeV, with seven 805 MRs side-coupled cavity modules operating at an average axial field of about 7.5 MV/meter. This will allow acceleration to 400 MeV in the existing Linac enclosure. Each accelerator module will be driven with a 12 MW klystron-based rf power supply. Three of seven accelerator modules have been fabricated, power tested and installed in their temporary location adjacent to the existing DTL. All seven RF Modulators have been completed and klystron installation has begun. Waveguide runs have completed from the power supply gallery to the accelerator modules. The new linac will be powered in the temporary position without beam in order to verify overall system reliability until the laboratory operating schedule permits final conversion to 400 MeV operation.

  7. A novel electron gun for inline MRI-linac configurations

    PubMed Central

    Constantin, Dragoş E.; Holloway, Lois; Keall, Paul J.; Fahrig, Rebecca

    2014-01-01

    Purpose: This work introduces a new electron gun geometry capable of robust functioning in the presence of a high strength external magnetic field for axisymmetric magnetic resonance imaging (MRI)-linac configurations. This allows an inline MRI-linac to operate without the need to isolate the linear accelerator (linac) using a magnetic shield. This MRI-linac integration approach not only leaves the magnet homogeneity unchanged but also provides the linac flexibility to move along the magnet axis of symmetry if the source to target distance needs to be adjusted. Methods: Simple electron gun geometry modifications of a Varian 600C electron gun are considered and solved in the presence of an external magnetic field in order to determine a set of design principles for the new geometry. Based on these results, a new gun geometry is proposed and optimized in the fringe field of a 0.5 T open bore MRI magnet (GE Signa SP). A computer model for the 6 MeV Varian 600C linac is used to determine the capture efficiency of the new electron gun-linac system in the presence of the fringe field of the same MRI scanner. The behavior of the new electron gun plus the linac system is also studied in the fringe fields of two other magnets, a 1.0 T prototype open bore magnet and a 1.5 T GE Conquest scanner. Results: Simple geometrical modifications of the original electron gun geometry do not provide feasible solutions. However, these tests show that a smaller transverse cathode diameter with a flat surface and a slightly larger anode diameter could alleviate the current loss due to beam interactions with the anode in the presence of magnetic fields. Based on these findings, an initial geometry resembling a parallel plate capacitor with a hole in the anode is proposed. The optimization procedure finds a cathode-anode distance of 5 mm, a focusing electrode angle of 5°, and an anode drift tube length of 17.1 mm. Also, the linac can be displaced with ±15 cm along the axis of the 0.5 T

  8. A novel electron gun for inline MRI-linac configurations

    SciTech Connect

    Constantin, Dragoş E. Fahrig, Rebecca; Holloway, Lois; Keall, Paul J.

    2014-02-15

    Purpose: This work introduces a new electron gun geometry capable of robust functioning in the presence of a high strength external magnetic field for axisymmetric magnetic resonance imaging (MRI)-linac configurations. This allows an inline MRI-linac to operate without the need to isolate the linear accelerator (linac) using a magnetic shield. This MRI-linac integration approach not only leaves the magnet homogeneity unchanged but also provides the linac flexibility to move along the magnet axis of symmetry if the source to target distance needs to be adjusted. Methods: Simple electron gun geometry modifications of a Varian 600C electron gun are considered and solved in the presence of an external magnetic field in order to determine a set of design principles for the new geometry. Based on these results, a new gun geometry is proposed and optimized in the fringe field of a 0.5 T open bore MRI magnet (GE Signa SP). A computer model for the 6 MeV Varian 600C linac is used to determine the capture efficiency of the new electron gun-linac system in the presence of the fringe field of the same MRI scanner. The behavior of the new electron gun plus the linac system is also studied in the fringe fields of two other magnets, a 1.0 T prototype open bore magnet and a 1.5 T GE Conquest scanner. Results: Simple geometrical modifications of the original electron gun geometry do not provide feasible solutions. However, these tests show that a smaller transverse cathode diameter with a flat surface and a slightly larger anode diameter could alleviate the current loss due to beam interactions with the anode in the presence of magnetic fields. Based on these findings, an initial geometry resembling a parallel plate capacitor with a hole in the anode is proposed. The optimization procedure finds a cathode-anode distance of 5 mm, a focusing electrode angle of 5°, and an anode drift tube length of 17.1 mm. Also, the linac can be displaced with ±15 cm along the axis of the 0.5 T

  9. Study of space charge-dominated beam bunching and some aspects of SSF linac designs

    SciTech Connect

    1995-12-31

    This report is made up from works under the Agreement 1083P0015-35 between Los Alamos National Laboratory and Moscow Radiotechnical Institute. There are five report parts. In the 1-st, 2-nd, and 3-d parts works on SCD-beam dynamics understanding were continued. In the 4-th and 5-th parts two conceptual linac designs were considered: for deutron linac with energy of 40 MeV and for proton linac with energy 1 GeV. The both linacs have focusing by superconducting solenoids (SSF linacs). The 1 GeV proton CW linac design is an extension of the design from.

  10. An induction linac developed for FEL application

    NASA Astrophysics Data System (ADS)

    de Mascureau, J.; Anthouard, Ph.; Bardy, J.; Eyharts, Ph.; Eyl, P.; Launspach, J.; Thevenot, M.; Villate, D.

    1992-07-01

    An induction linac is being studied and built at CESTA for FEL application. At first we studied the induction technology and namely the high-voltage (HV) generators and the induction cells. A HV generator designed to feed the cells with calibrated pulses (150 kV, 50 ns, δV/V < 1%) has been built using a resonant charging system and magnetic switches. This generator is planned for kHz repetition-rate operation. A prototype induction cell has also been built and tested with a cable generator. An electron injector (1.5 MeV, 1.5kA) has been designed and is now under test: it uses ten induction cells and a thermionic dispenser cathode. Numerical codes have been developed and simulations have been compared with experimental results for HV generators, induction cells, and the injector. An induction accelerating module has been studied and we plan to have the accelerator working at 3 MeV in 1992.

  11. Electron gun system for NSC KIPT linac

    NASA Astrophysics Data System (ADS)

    Zhou, Zu-Sheng; He, Da-Yong; Chi, Yun-Long

    2014-06-01

    In the NSC KIPT linac, a neutron source based on a subcritical assembly driven by a 100 MeV/100 kW electron linear accelerator is under design and development. The linear accelerator needs a new high current electron gun. In this paper, the physical design, mechanical fabrication and beam test of this new electron gun are described. The emission current is designed to be higher than 2 A for the pulse width of 3 μs with repetition rate of 50 Hz. The gun will operate with a DC high voltage power supply that can provide a high voltage up to 150 kV. Computer simulations and optimizations have been carried out in the design stage, including the gun geometry and beam transport line. The test results of high voltage conditioning and beam test are presented. The operation status of the electron gun system is also included. The basic test results show that the design, manufacture, and operation of the new electron system are basically successful.

  12. Development of head docking device for linac-based radiosurgery with a Neptun 10 PC linac.

    PubMed

    Khoshbin Khoshnazar, Alireza; Bahreyni Toossi, Mohammad Taghi; Hashemian, Abdolreza; Salek, Roham

    Stereotactic radiosurgery is a method for focused irradiation of intracranial lesions. Linac-based radiosurgery is currently performed by two techniques: couch mounted and pedestal mounted. In the first technique a device is required to affix the patient's head to the couch and neoreover to translate it accurately. Structure of such a device constructed by the authors plus acceptance test performed for evaluation is described in the article. A head docking device has been designed and constructed according to geometry of linac's couch and also desired functions. The device is cornpletely made from aluminum and consists of four major components: attachment bar, lower structure with four moveing accuracy mechanical stability and isocentric accuracy were assessed in the frame of acceptance test. Translating accuracy, mechanical stability and isocentric accuracy were found to be respectively: 1 mm, 1.64 mm and 3.2 mm with accuracy of 95%. According to AAPM report no. 54, a head docking device should translate head with an accuracy of 1 mm; this recommendation has been met. Moreover, we have demonstrated that the isocentric accuracy and mechanical stability of the device are sufficient that the device on confidently be used in stereotactic treatment. PMID:17664152

  13. Fermilab 200 MeV linac control system hardware

    SciTech Connect

    Shea, M.F.

    1984-01-01

    This report is a description of the present Linac distributed control system that replaces the original Xerox computer and interface electronics with a network of 68000-based stations. In addition to replacing the obsolete Xerox equipment, goals set for the new system were to retain the fast response and interactive nature of the original system, to improve reliability, to ease maintenance, and to provide 15 Hz monitoring of all Linac parameters. Our previous experience with microcomputer installations showed that small, stand-alone control systems are rather straightforward to implement and have been proven to be reliable in operation, even in the severe environment of the 750-keV preaccelerator. The overall design of the Linac system incorporates the concept of many relatively small, stand-alone control systems networked together using an intercomputer communication network. Each station retains its local control system character but takes advantage of the network to allow an operator to interact with the entire Linac from any local console. At the same time, a link to the central computer system allows Host computers to also access parameters in the Linac.

  14. Radiation surveys of the Naval Postgraduate School LINAC. Master's thesis

    SciTech Connect

    Davidson, D.F.

    1992-06-01

    The NPS LINAC was initially designed for use in radiation damage and nuclear structure studies. The LINAC's role has subsequently evolved to include research in a variety of other areas such as the generation of coherent microwave, optical, and x-radiation. The use of high energy electrons produces a radiation environment for which personnel and equipment safety must be addressed. It is the purpose of this study to measure the radiation levels in the areas surrounding the LINAC and to identify the sources of that radiation. A guide is provided for the installation of additional supplemental shielding for the LINAC to further reduce radiation levels in areas occupied by personnel. Primary conclusions of this study are that the radiation levels produced by the linear accelerator are below statutory limits, and that a neutron energy correction factor different than currently used should be used for personnel dosimetry at the NPS LINAC. This will result in the reduction of the TLD measured neutron dose evaluation for personnel.

  15. SC driver linac for a rare isotope facility.

    SciTech Connect

    Shepard, K. W.; Delayen, J. R.; Lyneis, C. M.; Nolen, J.; Ostroumov, P.; Staples, J. W.; Brawley, J.; Hovater, C.; Kedzie, M.; Kelly, M. P.; Mammosser, J.; Piller, C.; Portillo, M.

    1999-12-10

    An ion linac formed of superconducting rf cavities can provide a multi-beam driver accelerator for the production of nuclei far from stability. A multi-beam driver supports a wide variety of production reactions and methods. This paper outlines a concept for a 1.3 GV linac capable of delivering several hundred kilowatts of uranium beam at an energy of 400 MeV per nucleon. The linac would accelerate the full mass range of ions, and provide higher velocities for the lighter ions, for example 730 MeV for protons. The accelerator will consist of an ECR ion source injecting a normally conducting RFQ and four short IH structures, then feeding an array of more than 400 superconducting cavities of six different types, which range in frequency from 58 to 700 MHz. A novel feature of the linac is the acceleration of beams containing more than one charge state through portions of the linac, in order to maximize beam current for the heavier ions. Such operation is made feasible by the large transverse and longitudinal acceptance provided by the large aperture and high gradient which are characteristic of superconducting rf cavities.

  16. Concepts and Applications of Energy Recovery Linacs (ERLs)

    SciTech Connect

    Gruner, Sol M.

    2004-05-12

    Energy Recovery Linacs are being explored as next generation synchrotron light sources. The fundamental x-ray beam properties from storage ring sources, such as the source size, brilliance, and pulse duration are limited by the dynamic equilibrium characteristic of the magnetic lattice that is the storage ring. Importantly, the characteristic equilibration time is long, involving thousands of orbits around the ring. Advances in laser-driven photoelectron sources allow the generation of electron bunches with superior properties for synchrotron radiation. ERLs preserve these properties by acceleration with a superconducting linac, followed by transport through a return loop hosting insertion devices, similar to that of a 3rd generation storage ring. The loop returns bunches to the linac 180 deg. out of accelerating phase for deceleration through the linac and disposal. Thus, the electron beam energy is recycled back into the linac RF field for acceleration of new bunches and the equilibrium degradation of bunches never occurs. The superior projected properties of ERLs beams include extraordinary brilliance and small source size, with concomitant high transverse coherence, x-ray pulse durations down to {approx}100 femtoseconds, and flexibility of operation. ERL projects are summarized. ERLs will be capable of hosting practically all experiments now being carried out at storage rings while also enabling new types of experiments.

  17. Mechanical Engineering of the Linac for the Spallation Neutron Source

    SciTech Connect

    Bultman, N.K.; Chen, Z.; Collier, M.; Erickson, J.L.; Guthrie, A.; Hunter, W.T.; Ilg, T.; Meyer, R.K.; Snodgrass, N.L.

    1999-03-29

    The linac for the Spallation Neutron Source (SNS) Project will accelerate an average current of 1 mA of H{sup {minus}} ions from 20 MeV to 1GeV for injection into an accumulator ring. The linac will be an intense source of H{sup {minus}} ions and as such requires advanced design techniques to meet project technical goals as well as to minimize costs. The DTL, CCDTL and CCL are 466m long and operate at 805 MHz with a maximum H{sup {minus}} input current of 28 mA and 7% rf duty factor. The Drift Tube Linac is a copper-plated steel structure using permanent magnetic quadrupoles. The Coupled-Cavity portions are brazed copper structures and use electromagnetic quads. RF losses in the copper are 80 MW, with total rf power supplied by 52 klystrons. Additionally, the linac is to be upgraded to the 2- and 4-MW beam power levels with no increase in duty factor. The authors give an overview of the linac mechanical engineering effort and discuss the special challenges and status of the effort.

  18. Short wavelength FELs using the SLAC linac

    NASA Astrophysics Data System (ADS)

    Winick, H.; Bane, K.; Boyce, R.; Cobb, J.; Loew, G.; Morton, P.; Nuhn, H.-D.; Paterson, J.; Pianetta, P.; Raubenheimer, T.; Seeman, J.; Tatchyn, R.; Vylet, V.; Pellegrini, C.; Rosenzweig, J.; Travish, G.; Prosnitz, D.; Scharlemann, E. T.; Halbach, K.; Kim, K.-J.; Schlueter, R.; Xie, M.; Bonifacio, R.; De Salvo, L.; Pierini, P.

    1994-08-01

    Recent technological developments have opened the possibility to construct a device which we call a linac coherent light source (LCLS) (C. Pellegrini et al., Nucl. Instr. and Meth. A 331 (1993) 223; H. Winick et al., Proc. IEEE 1993 Particle Accelerator Conf., Washington, DC, May 1993; C. Pellegrini, Nucl. Instr. and Meth. A 341 (1994) 326; J. Seeman, SPIE Meet. on Electron Beam Sources of High Brightness Radiation, San Diego, CA, July 1993 [1-4]); it would be a fourth-generation light source, with brightness, coherence, and peak power far exceeding other sources. Operating on the principle of the free electron laser (FEL), the LCLS would extend the range of FEL operation to much shorter wavelength than the 240 nm that has so far been reached. We report the results of studies of the use of the SLAC linac to drive an LCLS at wavelengths from about 3 to 100 nm initially and possibly even shorter wavelengths in the future. Lasing would be achieved in a single pass of a low emittance, high peak current, high-energy electron beam through a long undulator. Most present FELs use an optical cavity to build up the intensity of the light to achieve lasing action in a low-gain oscillator configuration. By eliminating the optical cavity, which is difficult to make at short wavelengths, laser action can be extended to shorter wavelengths by self-amplified-spontaneous-emission (SASE), or by harmonic generation from a longer wavelength seed laser. Short wavelength, single pass lasers have been extensively studied at several laboratories and at recent workshops (M. Cornacchia and H. Winick (eds.), SLAC Report 92/02; I. Ben-Zvi and H. Winick (eds.), BNL report 49651 [5,6]). The required low-emittance electron beam can be achieved with recently-developed rf photocathode electron guns (B.E. Carlsten, Nucl. Instr. and Meth. A 285 (1989) 313; J. Rosenzweig and L. Serafini, Proc. IEEE 1993 Particle Accelerator Conf., Washington, DC, 1993 [7,8]). The peak current is increased by about an

  19. Investigations of Slow Motions of the SLAC Linac Tunnel

    SciTech Connect

    Seryi, Andrei

    2000-08-31

    Investigations of slow transverse motion of the linac tunnel of the Stanford Linear Collider have been performed over period of about one month in December 1999--January 2000. The linac laser alignment system, equipped with a quadrant photodetector, allowed submicron resolution measurement of the motion of the middle of the linac tunnel with respect to its ends. Measurements revealed two major sources responsible for the observed relative motion. Variation of the external atmospheric pressure was found to be the most significant cause of short wavelength transverse motion of the tunnel. The long wavelength component of the motion has been also observed to have a large contribution from tidal effects. The measured data are essential for determination of parameters for the Next Linear Collider.

  20. Thirty-five years of drift-tube linac experience

    SciTech Connect

    Knowles, H.B.

    1984-10-01

    The history of the drift-tube linear accelerator (linac) for the first 35 years of its existence is briefly reviewed. Both US and foreign experience is included. Particular attention is given to technological improvements, operational reliability, capital investment, and number of personnel committed to drift-tube linac (DTL) development. Preliminary data indicate that second- and third-generation (post-1960) DTLs have, in the US alone, operated for a combined total period of more than 75 machine-years and that very high reliability (>90%) has been achieved. Existing US drift-tube linacs represent a capital investment of at least $250 million (1983). Additional statistical evidence, derived from the proceedings of the last 11 linear accelerator conferences, supports the view that the DTL has achieved a mature technological base. The report concludes with a discussion of important recent advances in technology and their applications to the fourth generation of DTLs, many of which are now becoming operational.

  1. Optics and beam transport in energy recovery linacs

    NASA Astrophysics Data System (ADS)

    Hoffstaetter, Georg H.; Litvinenko, Vladimir; Owen, Hywel

    2006-02-01

    Here, we report on the working group "Optics and Beam Transport" of the 2005 Energy-Recovery-Linac Workshop. This workshop also had working groups on "Electron Guns and Injector Designs", "Superconducting RF and RF Control", and "Synchronization and Diagnostics/Instrumentation". Here, we are concerned with the many different ERL proposals that international laboratories have been working on. Subjects of concern are optics, accelerator design and modeling, stability requirements, designs of the merger that connects the conventional injector linac with the Energy Recovery Linac, longitudinal phase space manipulations to produce short pulses, beam dynamics and limitations by beam instabilities, and computational aspects of space-charge and synchrotron radiation effects. A coarse grain overview is given and reference is made to more detailed articles that were presented in this working group. Subjects are identified where collaborations should be encouraged and areas of future R&D are prioritized.

  2. Design considerations for high-current superconducting ion linacs

    SciTech Connect

    Delayen, J.R.; Bohn, C.L.; Micklich, B.J.; Roche, C.T.; Sagalovsky, L.

    1993-08-01

    Superconducting linacs may be a viable option for high-current applications such as fusion materials irradiation testing, spallation neutron source, transmutation of radioactive waste, tritium production, and energy production. These linacs must run reliably for many years and allow easy routine maintenance. Superconducting cavities operate efficiently with high cw gradients, properties which help to reduce operating and capital costs, respectively. However, cost-effectiveness is not the sole consideration in these applications. For example, beam impingement must be essentially eliminated to prevent unsafe radioactivation of the accelerating structures, and thus large apertures are needed through which to pass the beam. Because of their high efficiency, superconducting cavities can be designed with very large bore apertures, thereby reducing the effect of beam impingement. Key aspects of high-current cw superconducting linac designs are explored in this context.

  3. DIAGNOSTIC TOOLS FOR BEAM HALO INVESTIGATION IN SNS LINAC

    SciTech Connect

    Aleksandrov, Alexander V; Blokland, Willem; Liu, Yun; Long, Cary D; Zhukov, Alexander P

    2012-01-01

    Uncontrolled beam loss is a major concern in the operation of a high intensity hadron linac. A low density cloud of particles with large oscillation amplitudes, so called halo, can form around the dense regular beam core. This halo can be a direct or indirect cause of beam loss. There is experimental evidence of halo growing in the SNS linac and limiting the further reduction of beam loss. A set of tools is being developed for detecting of the halo and investigating its origin and dynamics. The set includes high resolution emittance measurements in the injector, laser based emittance measurements at 1 GeV, and high resolution profile measurements along the linac. We will present our experience with useful measurement techniques and data analysis algorithms.

  4. R and D energy recovery LINAC at Brookhaven National Laboratory

    SciTech Connect

    Litvinenko,V.N.; Beavis, D.; Ben-Zvi, I.; Blaskiewicz, M.; Burrill, A.; Calaga, R.; Cameron, P.; Chang, X.; Drees, A.; Ganetis, G.; Gassner, D.; Hahn, H.; Hammons, L.; Hershcovitch, A.; Hseuh, H-C.; Jain, A.; Kayran, D.; Kewisch, J.; Lambiase, R.; Lederle, D.; Mahler, G.; McIntyre, G.; Meng, W.; Nehring, T.; Oerter, B.; Pai, C.; Pate, D.; Phillips, D.; Pozdeyev, E.; Rao, T.; Reich, J.; Roser, T.; Russo, T.; Smith, K.; Tuozzolo, J.; Weiss, D.; Williams, N.; Yip, K.; Zaltsman, A.; Favale, A.; Bluem, H.; Cole, M.; Holmes, D.; Rathke, J.; Schultheiss, T.; Todd, A.; Delayen, J.; Funk, L.; Phillips, L.; Preble, J.

    2008-06-23

    Collider Accelerator Department at BNL is in the final stages of developing the 20-MeV R and D energy recovery linac with super-conducting 2.5 MeV RF gun and single-mode super-conducting 5-cell RF linac. This unique facility aims to address many outstanding questions relevant for high current (up to 0.5 A of average current), high brightness energy-recovery linacs with novel ZigZag-type merger. Recent development in the R and D ERL plans include gun and 5-cell cavity (G5) test and possibility of using R and D ERL for proof-of-principle test of Coherent Electron Cooling at RHIC.

  5. The SLAC linac as used in the SLC collider

    SciTech Connect

    Seeman, J.T.; Abrams, G.; Adolphsen, C.; Atwood, W.; Bane, K.L.F.; Iverson, R.; Jacobsen, R.; Himel, T.M.; Jobe, R.K.; Lavine, T.L.

    1989-06-01

    The linac of the SLAC Linear Collider (SLC) must accelerate three high intensity bunches on each linac pulse from 1.2 GeV to 50 GeV with minimal increase of the small transverse emittance. The procedures and adjustments used to obtain this goal are outlined. Some of the accelerator parameters and components which interact are the beam energy, transverse position, component alignment, RF manipulation, feedback systems, quadrupole lattice, BNS damping, energy spectra, phase space matching, collimation, instrumentation and modelling. The method to bring these interdependent parameters collectively into specification has evolved over several years. This review is ordered in the sequence which is used to turn on the linac from a cold start and produce acceptable beams for the final focus and collisions. Approximate time estimates for the various activities are given. 21 refs.

  6. Overview and status of RF systems for the SSC Linac

    SciTech Connect

    Mynk, J.; Grippe, J.; Cutler, R.I.; Rodriguez, R.

    1993-05-01

    The Superconducting Super Collider (SSC) Linear Accelerator (Linac) produces a 600-MeV, 35-{mu}s, H-beam at a 10-Hz repetition rate. The beam is accelerated by a series of RF cavities. These consist of a Radio Frequency Quadrupole (RFQ), two bunchers, and four Drift Tube Linac (DTL) tanks at 427.617 MHz, and two bunchers, nine side-coupled Linac modules, and an energy compressor at 1282.851 MHz. The RFQ amplifier and the low-frequency buncher cavity amplifiers use gridded tubes, while the other cavities use klystron amplifier systems. The RF control system consists of a reference line and cavity feedback and feedforward loops for each amplifier. The RF amplifier system for each of these accelerator cavities is described, and the current status of each system is presented.

  7. Heavy-ion acceleration with a superconducting linac

    SciTech Connect

    Bollinger, L.M.

    1988-01-01

    This year, 1988, is the tenth anniversary of the first use of RF superconductivity to accelerate heavy ions. In June 1978, the first two superconducting resonators of the Argonne Tandem-Linac Accelerator System (ATLAS) were used to boost the energy of a /sup 19/F beam from the tandem, and by September 1978 a 5-resonator linac provided an /sup 16/O beam for a nuclear-physics experiment. Since then, the superconducting linac has grown steadily in size and capability until now there are 42 accelerating structures and 4 bunchers. Throughout this period, the system was used routinely for physics research, and by now the total time with beam on target is 35,000 hours. Lessons learned from this long running experience and some key technical developments that made it possible are reviewed in this paper. 19 refs., 3 figs., 2 tabs.

  8. Argonne tandem as injector to a superconducting linac

    SciTech Connect

    Yntema, J.L.; Den Hartog, P.K.; Henning, W.; Kutschera, W.

    1980-01-01

    The Argonne Tandem uses Pelletron chains, NEC accelerator tubes, and a dual closed-corona system. Its main function is to be an injector for a superconducting linear accelerator. As long as the transverse and longitudinal emittances are within the acceptance of the linac, the output beam quality of the tandem-linac system is essentially determined by the tandem. The sensitivity of the linac to the longitudinal emittance ..delta..E..delta..t of the incident beam makes the output beam quality dependent on the negative-ion velocity distribution in the source, transit-time effects in the tandem, molecular-beam dissociation, and stripper-foil uniformity. This paper discusses these beam-degrading effects.

  9. Real time bunch length measurements in the SLC linac

    SciTech Connect

    Sheppard, J.C.; Clendenin, J.E.; James, M.B.; Miller, R.H.; Ross, M.C.

    1985-02-01

    The longitudinal charge distribution of bunches accelerated in the Stanford Linear Collider (SLC) linac will strongly affect the performance of the Collider. Bunch lengths are chosen in a balance between the deleterious effects of longitudinal and transverse wakefields. The former impacts on the beam energy spread whereas the latter is important to the transverse emittance. Two bunch length measurement ports have been installed in the SLC linac: one in the injector region and one after the emittance damping ring to linac reinjection point. These ports utilize a fused quartz Cerenkov radiator in conjunction with an electrooptic streak camera to permit real time monitoring of single s-band buckets with a resolution of several picoseconds. The design of the radiators and light collection optics is discussed with an emphasis on those issues important to high resolution. Experimental results are presented. 7 refs., 4 figs.

  10. CONCEPTUAL DESIGN OF A LOW-BETA SC PROTON LINAC

    SciTech Connect

    R. W. GARNETT; T. P WANGLER; ET AL

    2001-04-01

    In this paper we discuss the conceptual design of a low-{beta} superconducting proton linac based on multi-gap spoke resonator structures. We have demonstrated the feasibility of using superconducting accelerating structures throughout a proton linac for high-peak current applications. The injection energy for this linac is assumed to be 6.7 MeV, which equals the output energy of the CW RFQ built for the Low-Energy Demonstration Accelerator now operating at Los Alamos. The beam is accelerated to 109 MeV using multi-gap spoke resonators. Both 2-gap and 3-gap cavities are used in three accelerating sections with geometric-{beta} values of 0.175, 0.2, and 0.34. Higher beam energies can be achieved by transitioning to elliptical superconducting cavities to further accelerate the beam. Preliminary beam-dynamics simulation results are shown and discussed.

  11. Solenoid-based focusing in a proton linac

    SciTech Connect

    Terechkine, I; DiMarco, J.; Schappert, W.; Sergatskov, d.; Tartaglia, M.; /Fermilab

    2010-09-01

    Development of solenoid-based focusing lenses for the transport channel of an R&D linac front end at FNAL (HINS linac) is in its final stage. Superconducting lenses for the room temperature RF section of the linac are assembled into individual cryostats and certified using a dedicated test stand. During this certification process, the optical axis of each lens relative to the cryogenic vessel is found in the warm and cold state. Lenses for the superconducting RF sections are ready for production, and development of a cryomodule (which contains multiple superconducting lenses and RF cavities) is in progress. Studies have been conducted to measure fringe magnetic field of a lens in the cryomodule, to investigate a laser-based method of alignment, and to evaluate the extent of beam quality degradation due to imperfections in lens construction and alignment. This report presents some results of these studies.

  12. A hot-spare injector for the APS linac.

    SciTech Connect

    Lewellen, J. W.

    1999-04-13

    Last year a second-generation SSRL-type thermionic cathode rf gun was installed in the Advanced Photon Source (APS) linac. This gun (referred to as ''gun2'') has been successfully commissioned and now serves as the main injector for the APS linac, essentially replacing the Koontz-type DC gun. To help ensure injector availability, particularly with the advent of top-up mode operation at the APS, a second thermionic-cathode rf gun will be installed in the APS linac to act as a hot-spare beam source. The hot-spare installation includes several unique design features, including a deep-orbit Panofsky-style alpha magnet. Details of the hot-spare beamline design and projected performance are presented, along with some plans for future performance upgrades.

  13. An energy recovery electron linac-on-ring collider

    SciTech Connect

    Merminga, L.; Krafft, G.A.; Lebedev, V.A.; Ben-Zvi, I.

    2000-09-14

    We present the design of high-luminosity electron-proton/ion colliders in which the electrons are produced by an Energy Recovering Linac (ERL). Electron-proton/ion colliders with center of mass energies between 14 GeV and 100 GeV (protons) or 63 GeV/A (ions) and luminosities at the 10{sup 33}(per nucleon) level have been proposed recently as a means for studying hadronic structure. The linac-on-ring option presents significant advantages with respect to: (1) spin manipulations (2) reduction of the synchrotron radiation load in the detectors (3) a wide range of continuous energy variability. Rf power and beam dump considerations require that the electron linac recover the beam energy. Based on extrapolations from actual measurements and calculations, energy recovery is expected to be feasible at currents of a few hundred mA and multi-GeV energies. Luminosity projections for the linac-ring scenario based on fundamental limitations are presented. The feasibility of an energy recovery electron linac-on-proton ring collider is investigated and four conceptual point designs are shown corresponding to electron to proton energies of: 3 GeV on 15 GeV, 5 GeV on 50 GeV and 10 GeV on 250 GeV, and for gold ions with 100 GeV/A. The last two designs assume that the protons or ions are stored in the existing RHIC accelerator. Accelerator physics issues relevant to proton rings and energy recovery linacs are discussed and a list of required R and D for the realization of such a design is presented.

  14. Application of electron linacs in medicine, food sterilization and synchrotron light sources

    NASA Astrophysics Data System (ADS)

    Tran, Duc-Tien

    1989-04-01

    A review of the state of the art and new trends in electron linac technology is given with emphasis on three particular applications: radiotherapy, food sterilization and synchrotron light sources. The requirements on linac performances that these applications call for, namely energy variation flexibility, high power, high energy and low cost, will open linacs to new applications to come.

  15. THE CONVENTIONAL FACILITIES REQUIREMENTS FOR THE SNS LINAC

    SciTech Connect

    P. TALLERICO; M. CROW; ET AL

    2001-06-01

    The Spallation Neutron Source (SNS) linac has a high gradient and 2 MW of beam power, and it therefore requires substantial RF power and cooling. There are 94 klystrons in its RF system, a large number for a proton linac. The optimization process and logic that lead to the klystron, transmitter, and power supply sizes is discussed. We also describe the requirements for building and tunnel area, electrical power, and water for this system. The trade-off decisions between low capital cost, low operating cost, and good maintainability are described.

  16. Commissioning plan for a high-current proton linac

    SciTech Connect

    Chan, K.C.D.; Barber, R.L.; Garnett, R.W.

    1997-09-01

    High-power proton linacs (E>500 MeV) are potentially useful for transmutation applications, such as the production of tritium. In production applications, high availability is essential. Achieving high availability requires an accelerator design that simplifies maintenance and accommodates commissioning procedures designed to minimize tune-up time. These are worthwhile goals for any accelerator, but the very high beam powers (170 MW) and heavy beam loading of the Accelerator Production of Tritium (APT) linac introduce significant new challenges. This paper will describe the commissioning plan, as developed to date.

  17. Simplified RF power system for Wideroe-type linacs

    SciTech Connect

    Fugitt, J.; Howard, D.; Crosby, F.; Johnson, R.; Nolan, M.; Yuen, G.

    1981-03-01

    The RF system for the SuperHILAC injector linac was designed and constructed for minimum system complexity, wide dynamic range, and ease of maintenance. The final amplifier is close coupled to the linac and operates in an efficient semilinear mode, eliminating troublesome transmission lines, modulators, and high level regulators. The system has been operated at over 250 kW, 23 MHz with good regulation. The low level RF electronics are contained in a single chassis adjacent to the RF control computer, which monitors all important operating parameters. A unique 360/sup 0/ phase and amplitude modular is used for precise control and regulation of the accelerating voltage.

  18. BEAM SIMULATIONS USING VIRTUAL DIAGNOSTICS FOR THE DRIVER LINAC

    SciTech Connect

    R. C. York; X. Wu; Q. Zhao

    2011-12-21

    End-to-end beam simulations for the driver linac have shown that the design meets the necessary performance requirements including having adequate transverse and longitudinal acceptances. However, to achieve reliable operational performance, the development of appropriate beam diagnostic systems and control room procedures are crucial. With limited R&D funding, beam simulations provide a cost effective tool to evaluate candidate beam diagnostic systems and to provide a critical basis for developing early commissioning and later operational activities. We propose to perform beam dynamic studies and engineering analyses to define the requisite diagnostic systems of the driver linac and through simulation to develop and test commissioning and operational procedures.

  19. Billion particle linac simulations for future light sources

    SciTech Connect

    Ryne, R. D.; Venturini, M.; Zholents, A. A.; Qiang, J.

    2008-09-25

    In this paper we report on multi-physics, multi-billion macroparticle simulation of beam transport in a free electron laser (FEL) linac for future light source applications. The simulation includes a self-consistent calculation of 3D space-charge effects, short-range geometry wakefields, longitudinal coherent synchrotron radiation (CSR) wakefields, and detailed modeling of RF acceleration and focusing. We discuss the need for and the challenges associated with such large-scale simulation. Applications to the study of the microbunching instability in an FEL linac are also presented.

  20. Neutron distribution and induced activity inside a Linac treatment room.

    PubMed

    Juste, B; Miró, R; Verdú, G; Díez, S; Campayo, J M

    2015-08-01

    Induced radioactivity and photoneutron contamination inside a radiation therapy bunker of a medical linear accelerator (Linac) is investigated in this work. The Linac studied is an Elekta Precise electron accelerator which maximum treatment photon energy is 15 MeV. This energy exceeds the photonuclear reaction threshold (around 7 MeV for high atomic number metals). The Monte Carlo code MCNP6 has been used for quantifying the neutron contamination inside the treatment room for different gantry rotation configuration. Walls activation processes have also been simulated. The approach described in this paper is useful to prevent the overexposure of patients and medical staff. PMID:26737878

  1. SRF cavities for CW option of Project X Linac

    SciTech Connect

    Solyak, N.; Gonin, I.; Khabiboulline, T.; Lunin, A.; Perunov, N.; Yakovlev, V.; /Fermilab

    2009-09-01

    Alternative option of Project X is based on the CW SC 2GeV Linac with the average current 1mA. Possible option of the CW Linac considered in the paper includes low energy part consisted of a few families SC Spoke cavities (from 2.5 MeV to 466 MeV) and high energy part consisted of 2 types of elliptical cavities (v/c=0.81 and v/c=1). Requirements and designed parameters of cavities are considered.

  2. LINAC BEAM DYNAMICS SIMULATIONS WITH PY-ORBIT

    SciTech Connect

    Shishlo, Andrei P

    2012-01-01

    Linac dynamics simulation capabilities of the PyORBIT code are discussed. PyORBIT is an open source code and a further development of the original ORBIT code that was created and used for design, studies, and commissioning of the SNS ring. The PyORBIT code, like the original one, has a two-layer structure. C++ is used to perform time-consuming computations, and the program flow is controlled from a Python language shell. The flexible structure makes it possible to use PyORBIT also for linac dynamics simulations. A benchmark of PyORBIT with Parmila and the XAL Online model is presented.

  3. A Cure for Multipass Beam Breakup in Recirculating Linacs

    SciTech Connect

    Byung C. Yunn

    2004-07-02

    We investigate a method to control the multipass dipole beam breakup instability in a recirculating linac including energy recovery. Effectiveness of an external feedback system for such a goal is shown clearly in a simplified model. We also verify the theoretical result with a simulation study.

  4. A METHOD TO CONTROL MULTIPASS BEAM BREAKUP IN RECIRCULATING LINACS

    SciTech Connect

    Byung Yunn

    2003-05-01

    We investigate a method to control the multipass dipole beam breakup instability in a recirculating linac including energy recovery. Effectiveness of an external feedback system for such a goal is shown clearly in a simplified model. We also verify the theoretical result with a simulation study.

  5. Optimization of steering elements in the RIA driver linac.

    SciTech Connect

    Lessner, E. S.; Aseev, V. S.; Ostroumov, P. N.; Physics

    2005-01-01

    The driver linac of the projected RIA facility is a versatile accelerator, a 1.4-GV, CW superconducting (SC) linac designed to simultaneously accelerate several heavy-ion charge states, providing beams from proton to uranium at 400 MeV/u at power levels at a minimum of 100 kW and up to 400 kW for most beams. Acceleration of multiple-charge-state uranium beams places stringent requirements on the linac design. A steering algorithm was derived that fulfilled the driver's real estate requirements, such as placement of steering dipole coils on SC solenoids and of beam position monitors outside cryostats, and beam-dynamics requirements, such as coupling effects induced by the focusing solenoids. The algorithm has been fully integrated into the tracking code TRACK and it is used to study and optimize the number and position of steering elements that minimize the multiple-beam centroid oscillations and preserve the beam emittance under misalignments of accelerating and transverse focusing elements in the driver linac.

  6. Beam Loss Studies for Rare Isotope Driver Linacs Final Report

    SciTech Connect

    Wangler, T P; Kurennoy, S S; Billen, J H; Crandall, K R; Qiang, J; Ryne, R D; Mustapha, B; Ostroumov, P; Zhao, Q; York, and R. C.

    2008-03-26

    The Fortran 90 RIAPMTQ/IMPACT code package is a pair of linked beam-dynamics simulation codes that have been developed for end-to-end computer simulations of multiple-charge-state heavy-ion linacs for future exotic-beam facilities. These codes have multiple charge-state capability, and include space-charge forces. The simulations can extend from the low-energy beam-transport line after an ECR ion source to the end of the linac. The work has been performed by a collaboration including LANL, LBNL, ANL, and MSU. The code RIAPMTQ simulates the linac front-end beam dynamics including the LEBT, RFQ, and MEBT. The code IMPACT simulates the beam dynamics of the main superconducting linac. The codes have been benchmarked for rms beam properties against previously existing codes at ANL and MSU. The codes allow high-statistics runs on parallel supercomputing platforms, particularly at NERSC at LBNL, for studies of beam losses. The codes also run on desktop PC computers for low-statistics work. The code package is described in more detail in a recent publication [1] in the Proceedings of PAC07 (2007 US Particle Accelerator Conference). In this report we describe the main activities for the FY07 beam-loss studies project using this code package.

  7. Status of the Project-X CW Linac Design

    SciTech Connect

    Ostiguy, J-F.; Solyak, N.; Berrutti, P.; Carneiro, J.P.; Lebedev, V.; Nagaitsev, S.; Saini, A.; Stheynas, B.; Yakovlev, V.P.; /Fermilab

    2012-05-01

    Project-X is a proposed proton accelerator complex at Fermilab that would provide particle beams to support a diversified experimental program at the intensity frontier. As currently envisioned, the complex would employ a CW superconducting linac to accelerate a 1 mA average, 5 mA peak H{sup -} beam from 2.1 MeV to 3 GeV. A second superconducting linac, operating in pulsed mode would ultimately accelerate a small fraction of this beam up to 8 GeV. The CW linac is based on five families of resonators operating at three frequencies: half-wave (1 family at 162.5 MHz), spoke (2 families at 325 MHz) and elliptical (2 families at 650 MHz). Accelerating and focusing elements are assembled in cryomodules separated by short warm sections. A long open region ({approx} 15 m) allows beam extraction at 1 GeV in support of a nuclear experimental program. In this paper, we present the latest iteration of the CW linac baseline lattice. We also briefly compare it to an alternative where the 162.5 half-wave resonators are replaced with 325 MHz spoke resonators.

  8. Intensity Effects of the FACET Beam in the SLAC Linac

    SciTech Connect

    Decker, F.-J.; Lipkowitz, N.; Sheppard, J.; White, G.R.; Wienands, U.; Woodley, M.; Yocky, G.; /SLAC

    2012-07-03

    The beam for FACET (Facility for Advanced aCcelerator Experimental Tests) at SLAC requires an energy-time correlation ('chirp') along the linac, so it can be compressed in two chicanes, one at the midpoint in sector 10 and one W-shaped chicane just before the FACET experimental area. The induced correlation has the opposite sign to the typical used for BNS damping, and therefore any orbit variations away from the center kick the tail of the beam more than the head, causing a shear in the beam and emittance growth. Any dispersion created along the linac has similar effects due to the high (>1.2% rms) energy spread necessary for compression. The initial huge emittances could be reduced by a factor of 10, but were still bigger than expected by a factor of 2-3. Normalized emittance of 3 {micro}m-rad in Sector 2 blew up to 150 {micro}m-rad in Sector 11 but could be reduced to about 6-12 {micro}m-rad, for the vertical plane although the results were not very stable. Investigating possible root causes for this, we found locations where up to 10 mm dispersion was created along the linac, which were finally verified with strong steering and up to 7 mm settling of the linac accelerator at these locations.

  9. Heavy ion linac as a high current proton beam injector

    NASA Astrophysics Data System (ADS)

    Barth, Winfried; Adonin, Aleksey; Appel, Sabrina; Gerhard, Peter; Heilmann, Manuel; Heymach, Frank; Hollinger, Ralph; Vinzenz, Wolfgang; Vormann, Hartmut; Yaramyshev, Stepan

    2015-05-01

    A significant part of the experimental program at Facility for Antiproton and Ion Research (FAIR) is dedicated to pbar physics requiring a high number of cooled pbars per hour. The primary proton beam has to be provided by a 70 MeV proton linac followed by two synchrotrons. The new FAIR proton linac will deliver a pulsed proton beam of up to 35 mA of 36 μ s duration at a repetition rate of 4 Hz (maximum). The GSI heavy ion linac (UNILAC) is able to deliver world record uranium beam intensities for injection into the synchrotrons, but it is not suitable for FAIR relevant proton beam operation. In an advanced machine investigation program it could be shown that the UNILAC is able to provide for sufficient high intensities of CH3 beam, cracked (and stripped) in a supersonic nitrogen gas jet into protons and carbon ions. This advanced operational approach will result in up to 3 mA of proton intensity at a maximum beam energy of 20 MeV, 1 0 0 μ s pulse duration and a repetition rate of up to 2.7 Hz delivered to the synchrotron SIS18. Recent linac beam measurements will be presented, showing that the UNILAC is able to serve as a proton FAIR injector for the first time, while the performance is limited to 25% of the FAIR requirements.

  10. MAFIA analysis of the effects of coupling slots in linacs

    NASA Astrophysics Data System (ADS)

    Adams, F. P.; Ungrin, J.; de Jong, M. S.

    1991-05-01

    We have used the MAFIA codes to analyze on-axis slot-coupled {π}/{2}- mode standing-wave linac structures. Quadrupolar fields in the structure are found to produce an elliptical accelerated beam. A modification to the design, yielding reduced beam ellipticity, is proposed.

  11. Critical design issues of high intensity proton linacs

    SciTech Connect

    Lawrence, G.P.

    1994-08-01

    Medium-energy proton linear accelerators are being studied as drivers for spallation applications requiring large amounts of beam powder. Important design factors for such high-intensity linacs are reviewed, and issues and concerns specific to this unprecedented power regime are discussed.

  12. PERFORMANCE OF THE SNS FRONT END AND WARM LINAC

    SciTech Connect

    Aleksandrov, Alexander V; Allen, Christopher K; Cousineau, Sarah M; Danilov, Viatcheslav; Galambos, John D; Holmes, Jeffrey A; Jeon, Dong-O; Pelaia II, Tom; Plum, Michael A; Shishlo, Andrei P; Stockli, Martin P; Zhang, Yan

    2008-01-01

    The Spallation Neutron Source accelerator systems will deliver a 1.0 GeV, 1.4 MW proton beam to a liquid mercury target for neutron scattering research. The accelerator complex consists of an H{sup -} injector, capable of producing one-ms-long pulses at 60 Hz repetition rate with 38 mA peak current, a 1 GeV linear accelerator, an accumulator ring and associated transport lines. The 2.5 MeV beam from the Front End is accelerated to 87 MeV in the Drift Tube Linac, then to 186 MeV in a Coupled-Cavity Linac and finally to 1 GeV in the Superconducting Linac. With the completion of beam commissioning, the accelerator complex began operation in June 2006 and beam power is being gradually ramped up toward the design goal. Operational experience with the injector and linac will be presented including chopper performance, longitudinal beam dynamics study, and the results of a beam loss study.

  13. An Energy Recovery Electron Linac On Ring Collider

    SciTech Connect

    Nikolitsa Merminga; Geoffrey Krafft; Valeri Lebedev; Ilan Ben-Zvi

    2001-09-01

    Electron-proton/ion colliders with center of mass energies between 14 GeV and 100 GeV (protons) or 63 GeV/A (ions) and luminosities at the 10{sup 33} (per nucleon) level have been proposed recently as a means for studying hadronic structure. Electron beam polarization appears to be crucial for many of the experiments. Two accelerator design scenarios have been examined in detail: colliding rings and recirculating linac-on-ring. Although the linac-on-ring scenario is not as well developed as the ring-ring scenario, comparable luminosities appear feasible. The linac-on-ring option presents significant advantages with respect to: (1) spin manipulations; (2) reduction of the synchrotron radiation load in the detectors; (3) a wide range of continuous energy variability. Rf power and beam dump considerations require that the electron linac recover the beam energy. This technology has been demonstrated at Jefferson Lab's IR FEL with cw current up to 5 mA and beam energy up to 50 MeV. Based on extrapolations from actual measurements and calculations, energy recovery is expected to be feasible at higher currents (a few hundred mA) and higher energies (a few GeV) as well. The report begins with a brief overview of Jefferson Lab's experience with energy recovery and summarize its benefits. Luminosity projections for the linac-ring scenario based on fundamental limitations are presented next. The feasibility of an energy recovery electron linac-on-proton ring collider is investigated and four conceptual point designs are shown corresponding to electron to proton energies of: 3 GeV on 15 GeV, 5 GeV on 50 GeV and 10 GeV on 250 GeV, and for gold ions with 100 GeV/A. The last two designs assume that the protons or ions are stored in the existing RHIC accelerator. Accelerator physics issues relevant to proton rings and energy recovery linacs are discussed next and a list of required R and D for the realization of such a design is presented.

  14. Tentative design of beam focusing for the AHF linac and transport systems

    SciTech Connect

    Swain, G.R.

    1989-01-01

    Proposals for an advanced hadron facility include building afterburner linacs for LAMPF. A first afterburner, Add-on Linac number 1, is proposed to accelerate the beam from 0.8 to 1.6 GeV. The output beam would then be fed to a compressor ring and to another afterburner, Add-on Linac number 2. We make a rough estimate of the transverse focusing strength needed in these linacs, and consider the transport line from the end of the LAMPF 805-MHz linac to the start of Add-on Linac number 1. A rebuncher is needed in this transport line for proper acceptance of the beam into the add-on linac. 2 refs., 4 figs.

  15. Recent developments for high-intensity proton linacs

    SciTech Connect

    Wangler, T.P.; Garnett, R.W.; Gray, E.R.; Nath, S.

    1996-04-01

    High-intensity proton linacs are being proposed for new projects around the world, especially for tritium production, and for pulsed spallation neutron sources. Typical requirements for these linacs include peak beam current of about 100 mA, and final energies of 1 GeV and higher, APT, a tritium production linac, requires cw operation to obtain sufficient average tritium production linac, requires cw operation to obtain sufficient average beam power, and H{sup +} ion sources appear capable of providing the required current and emittances. The pulsed spallation neutron source requires a linac as an injector to one or more accumulator rings, and favors the use of an H{sup minus} beam to allow charge-exchange injection into the rings. For both applications high availability is demanded; the fraction of scheduled beam time for actual production must be 75% or more. Such a high availability requires low beam-loss to avoid radioactivation of the accelerator, and to allow hands-on maintenance that will keep the mean repair and maintenance times short. To keep the accelerator activation sufficiently low, the beam loss should not exceed about 0.1 to 1.0 nA/m, except perhaps for a few localized places, where special design adaptations could be made. The requirement of such small beam losses at such a high intensity presents a new beam physics challenge. This challenge will require greater understanding of the beam distribution, including the low- density beam halo, which is believed to be responsible for most of the beam losses. Furthermore, it will be necessary to choose the apertures so the beam losses will be acceptably low, and because large aperture size is generally accompanied by an economic penalty resulting from reduced power efficiency, an optimized choice of the aperture will be desirable.

  16. High-power linac for a US spallation-neutron source

    SciTech Connect

    Wangler, T.P.; Billen, J.; Jason, A. Krawczyk, F.; Nath, S.; Shafer, R.; Staples, J.; Takeda, H.; Tallerico, P.

    1996-09-01

    We present status of high-power linac design studies for a proposed National Spallation Neutron Source (NSNS), based on a linac/accumulator-ring accelerator system. Overall project is a collaboration involving 5 national laboratories. ORNL will be responsible for the target, facilities, and conceptual design; BNL will be responsible for the ring; LBNL will be responsible for the injector, including the RFQ and a low-energy chopper in front of the RFQ; LANL will be responsible for the main linac; and ANL will be responsible for the instrumentation. The facility will be built at Oak Ridge. In the first phase, the dual-frequency linac with 402.5 and 805 MHz frequencies must deliver to the accumulator ring an H{sup -} beam near 1 GeV, with about 1 ms pulse length, a repetition rate 60 Hz, and average beam power {ge} 1 MW. The linac can be upgraded by a factor of 4 in beam power by increasing the dc injector current, and by funneling the beams from two 402.5 MHz low-energy linacs into the 805-MHz high-energy linac. Requirements for low beam loss in both linac and ring have important implications for linac design, including the requirement to provide efficient beam chopping to provide low-loss extraction for the ring. Linac design options and initial parameters are presented together with initial beam-dynamics simulation results.

  17. Assessment of Alternative RF Linac Structures for APT

    SciTech Connect

    1997-03-26

    The APT program has been examining both normal and superconducting variants of the APT linac for the past two years. A decision on which of the two will be the selected technology will depend upon several considerations including the results of ongoing feasibility experiments, the performance and overall attractiveness of each of the design concepts, and an assessment of the system-level features of both alternatives. The primary objective of the Assessment of Alternative RF Linac Structures for APT study reported herein was to assess and compare, at the system-level, the performance, capital and life cycle costs, reliability/availability/maintainability (RAM) and manufacturing schedules of APT RF linear accelerators based upon both superconducting and normal conducting technologies. A secondary objective was to perform trade studies to explore opportunities for system optimization, technology substitution and alternative growth pathways and to identify sensitivities to design uncertainties.

  18. Multipass Arc Lattice Design for Recirculating Linac Muon Accelerators

    SciTech Connect

    G.M. Wang, R.P. Johnson, S.A. Bogacz, D. Trbojevic

    2009-05-01

    Recirculating linear accelerators (RLA) are the most likely means to achieve rapid acceleration of short-lived muons to multi-GeV energies required for Neutrino Factories and TeV energies required for Muon Colliders. A drawback of this scheme is that a separate return arc is required for each passage of the muons through the linac. In the work described here, a novel arc optics based on a Non-Scaling Fixed Field Alternating Gradient (NSFFAG) lattice is developed, which would provide sufficient momentum acceptance to allow multiple passes (two or more consecutive energies) to be transported in one string of magnets. An RLA with significantly fewer arcs will reduce the cost. We will develop the optics and technical requirements to allow the maximum number of passes by using an adjustable path length to accurately control the returned beam to synchronize with the linac RF phase.

  19. Beam-based alignment measurements of the LANSCE linac

    SciTech Connect

    McCrady, R. C.; Rybarcyk, L. J.

    2004-01-01

    We have made measurements of the alignment of the Los Alamos Neutron Science Center (LANSCE) Drift Tube linac (DTL) and Side Coupled linac (SCL) using beam position measurements and analyzing them with linear models. In the DTL, we varied the injection steering and focusing lattice strengths, measured the beam position after each DTL tank, and analyzed the data with a linear model using R-matrices that were either computed by the Trace-3D computer program or extracted from analysis of the data. The analysis model allowed for tank-to-tank misalignments. The measurements were made similarly in the SCL, where the analysis model allowed for misalignments of each quadrupole doublet lens. We present here the analysis techniques and the resulting beam-based alignment measurements.

  20. Cavities and Cryomodules for the RIA Driver Linac

    SciTech Connect

    Fuerst, J.D.; Shepard, K.W.; Kedzie, M.; Kelly, M.P.

    2004-06-23

    We describe cavities, cryomodules, and associated subsystem concepts for the Rare Isotope Accelerator (RIA) driver linac baseline design. Some alternative concepts are also presented. Beams from protons to uranium are accelerated with superconducting RF cavities operating from 57.5 MHz to 805 MHz. Substantial cost reduction over the baseline design may be achieved by replacing three classes of elliptical cell structures operating at 2 K by two classes of three-spoke drift tube structures. Cavity count and tunnel length are reduced while efficient cooling at 4.5 K for all linac structures may be possible. Issues include RF power requirements, microphonics, clean handling techniques, separate cavity and insulating vacuum systems, and heat load.

  1. Accelerator control system at KEKB and the linac

    NASA Astrophysics Data System (ADS)

    Akiyama, Atsuyoshi; Furukawa, Kazuro; Kadokura, Eiichi; Kurashina, Miho; Mikawa, Katsuhiko; Nakamura, Tatsuro; Odagiri, Jun-ichi; Satoh, Masanori; Suwada, Tsuyoshi

    2013-03-01

    KEKB has completed all of the technical milestones and has offered important insights into the flavor structure of elementary particles, especially CP violation. The accelerator control system at KEKB and the injector linac was initiated by a combination of scripting languages at the operation layer and EPICS (experimental physics and industrial control system) at the equipment layer. During the project, many features were implemented to achieve extreme performance from the machine. In particular, the online linkage to the accelerator simulation played an essential role. In order to further improve the reliability and flexibility, two major concepts were additionally introduced later in the project, namely, channel access everywhere and dual-tier controls. Based on the improved control system, a virtual accelerator concept was realized, allowing the single injector linac to serve as three separate injectors to KEKB's high-energy ring, low-energy ring, and Photon Factory, respectively. These control technologies are indispensable for future particle accelerators.

  2. Focusing solenoids for the HINS Linac front end

    SciTech Connect

    Terechkine, I.; Appollinari, G.; Di-Marco, J.; Huang, Y.; Orris, D.; Page, T.; Rabehl, R.; Tartaglia, M.; Tompkins, J.; /Fermilab

    2008-10-01

    The low energy part of a linac for the High Intensity Neutrino Source (HINS) project at Fermilab will use superconducting solenoids as beam focusing elements (lenses). While the lenses for the conventional DTL-type accelerating section of the front end require individual cryostats, in the superconducting accelerating sections solenoids will be installed inside RF cryomodules. Some of the lenses in the conventional and in the superconducting sections are equipped with horizontal and vertical steering dipoles. Lenses for the DTL section are in the stage of production with certification activities ongoing at Fermilab. For the superconducting sections of the linac, a prototype lens has been built and tested. Each lens will be installed in the transport channel of the accelerator so that its magnetic axis is on the beamline. Corresponding technique has been developed at Fermilab and is used during the certification process. This report summarizes design features, parameters, and test results of the focusing lenses.

  3. Spatially periodic radio-frequency quadrupole focusing linac

    NASA Astrophysics Data System (ADS)

    Kolomiets, A. A.; Plastun, A. S.

    2015-12-01

    The new design for a spatially periodical rf quadrupole focusing linac is proposed. It consists of accelerating gaps formed between conventional cylindrical drift tubes, between drift tubes and rf quadrupoles with nonzero axial potential, and inside these rf quadrupoles, formed in the same way as in a conventional radio-frequency quadrupole (RFQ) linac with modulated electrodes. Such a combination provides both higher energy gain rate than conventional RFQ and stability of transverse motion for ion beams. The structure can be designed using various combinations of quadrupoles and drift tubes. Some options are considered in the paper using the smooth approximation method and computer simulation of beam dynamics. Transverse stability of particles has been studied. The proposed structure can provide suppression of rf defocusing effects on transverse beam dynamics. Some limitations of the spatially periodic rf quadrupole structure are mentioned.

  4. Maximizing Number of Passes in Recirculating Energy Recovery Linacs

    NASA Astrophysics Data System (ADS)

    Bogacz, S. Alex

    2016-03-01

    The next generation of high energy recirculating linear accelerators (RLAs) will rely on the energy recovery (ER) process for their extreme high current operation. Here, we discuss optimum design of multi-pass linac optics for an RLA based on a large scale superconducting linac. Initial strategy used in the design of 60 GeV, 6 pass RLA for the LHeC, has been extended to 10 passes for the proposed CEBAF ER experiment. The presented optimization scheme addresses overall beam transport performance, as well as specific beam dynamics issues, such as, beam stability due to collective effects. Work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177.

  5. Multi-beam RFQ linac structure for heavy ion fusion

    NASA Astrophysics Data System (ADS)

    Hayashizaki, Noriyosu; Ishibashi, Takuya; Ito, Taku; Hattori, Toshiyuki

    2009-07-01

    Both the RF linear accelerator (linac) and the linear induction accelerator have been considered as injectors in a driver system for heavy ion fusion (HIF). In order to relax beam defocusing by space charge effect in the low-energy region, the accelerating beams that were merged and had their beam currents increased by the funnel tree system are injected into storage rings. A multi-beam linac that accelerates multiple beams in an accelerator cavity has the advantages of cost reduction and downsizing of the system. We modeled the multi-beam Interdigital-H type radio frequency quadruple (IH-RFQ) cavities with the different beam numbers and evaluated the electromagnetic characteristics by simulation. As a result, the reasonable ranges of their configuration were indicated for a practical use.

  6. MODEL BENCHMARK WITH EXPERIMENT AT THE SNS LINAC

    SciTech Connect

    Shishlo, Andrei P; Aleksandrov, Alexander V; Liu, Yun; Plum, Michael A

    2016-01-01

    The history of attempts to perform a transverse match-ing in the Spallation Neutron Source (SNS) superconduct-ing linac (SCL) is discussed. The SCL has 9 laser wire (LW) stations to perform non-destructive measurements of the transverse beam profiles. Any matching starts with the measurement of the initial Twiss parameters, which in the SNS case was done by using the first four LW stations at the beginning of the superconducting linac. For years the consistency between data from all LW stations could not be achieved. This problem was resolved only after significant improvements in accuracy of the phase scans of the SCL cavities, more precise analysis of all available scan data, better optics planning, and the initial longitudi-nal Twiss parameter measurements. The presented paper discusses in detail these developed procedures.

  7. Linac4 low energy beam measurements with negative hydrogen ions

    SciTech Connect

    Scrivens, R. Bellodi, G.; Crettiez, O.; Dimov, V.; Gerard, D.; Granemann Souza, E.; Guida, R.; Hansen, J.; Lallement, J.-B.; Lettry, J.; Lombardi, A.; Midttun, Ø.; Pasquino, C.; Raich, U.; Riffaud, B.; Roncarolo, F.; Valerio-Lizarraga, C. A.; Wallner, J.; Yarmohammadi Satri, M.; Zickler, T.

    2014-02-15

    Linac4, a 160 MeV normal-conducting H{sup −} linear accelerator, is the first step in the upgrade of the beam intensity available from the LHC proton injectors at CERN. The Linac4 Low Energy Beam Transport (LEBT) line from the pulsed 2 MHz RF driven ion source, to the 352 MHz RFQ (Radiofrequency Quadrupole) has been built and installed at a test stand, and has been used to transport and match to the RFQ a pulsed 14 mA H{sup −} beam at 45 keV. A temporary slit-and-grid emittance measurement system has been put in place to characterize the beam delivered to the RFQ. In this paper a description of the LEBT and its beam diagnostics is given, and the results of beam emittance measurements and beam transmission measurements through the RFQ are compared with the expectation from simulations.

  8. Conversion of the AGS linac to H/sup -/ acceleration

    SciTech Connect

    Witkover, R.L.; Barton, D.S.; Reece, R.K.

    1983-01-01

    The AGS 200 MeV linac was converted to an H/sup -/ accelerator during the summer of 1982 using a magnetron-type source in the column of the second pre-injector pit. Because of the re-entrant electrode design, a 20 keV transport line was required to carry the beam to the first electrode. Several changes were made to the source which enhanced its performance over previous designs. The same H/sup -/ beam current is available at 2.75 times the duty factor with reduced deterioration of its output over several months of operation. The source, 750 keV transport, and linac modifications and performance will be presented.

  9. Design of a Marx-Topology Modulator for FNAL Linac

    SciTech Connect

    Butler, T. A.; Garcia, F. G.; Kufer, M. R.; Pfeffer, H.; Wolff, D.

    2015-04-28

    The Fermilab Proton Improvement Plan (PIP) was formed in late 2011 to address important and necessary upgrades to the Proton Source machines (Injector line, Linac and Booster). The goal is to increase the proton flux by doubling the Booster beam cycle rate while maintaining the same intensity per cycle, the same uptime, and the same residual activation in the enclosure. For the Linac, the main focus within PIP is to address reliability. One of the main tasks is to replace the present hard-tube modulator used on the 200 MHz RF system. Plans to replace this high power system with a Marx-topology modulator, capable of providing the required waveform shaping to stabilize the accelerating gradient and compensate for beam loading, will be presented, along with development data from the prototype unit.

  10. H- AND PROTON BEAM LOSS COMPARISON AT SNS SUPERCONDUCTING LINAC

    SciTech Connect

    Aleksandrov, Alexander V; Galambos, John D; Plum, Michael A; Shishlo, Andrei P

    2012-01-01

    A comparison of beam loss in the superconducting part (SCL) of the Spallation Neutron Source (SNS) linac for H- and protons is presented. During the experiment the nominal beam of negative hydrogen ions in the SCL was replaced by a proton beam created by insertion of a thin stripping carbon foil placed in the low energy section of the linac. The observed significant reduction in the beam loss for protons is explained by a domination of the intra beam stripping mechanism of the beam loss for H-. The details of the experiment are discussed, and a preliminary estimation of the cross section of the reaction H- + H- -> H- + H0 + e is presented. Earlier, a short description of these studies was presented in [1].

  11. PROSPECTS FOR A VERY HIGH POWER CW SRF LINAC

    SciTech Connect

    Robert Rimmer

    2010-06-01

    Steady development in SRF accelerator technology combined with the success of large scale installations such as CEBAF at Jefferson Laboratory and the SNS Linac at ORNL gives credibility to the concept of very high average power CW machines for light sources or Proton drivers. Such machines would be powerful tools for discovery science in themselves but could also pave the way to reliable cost effective drivers for such applications as neutrino factories, an energy-frontier muon collider, nuclear waste transmutation or accelerator driven subcritical reactors for energy production. In contrast to machines such as ILC that need maximum accelerating gradient, the challenges in these machines are mainly in efficiency, reliability, beam stability, beam loss and of course cost. In this paper the present state of the art is briefly reviewed and options for a multi-GeV, multi-MW CW linac are discussed.

  12. A self-adaptive feedforward rf control system for linacs

    NASA Astrophysics Data System (ADS)

    Zhang, Renshan; Ben-Zvi, Ilan; Xie, Jialin

    1993-01-01

    The design and performance of a self-adaptive feedforward rf control system are reported. The system was built for the linac of the Accelerator Test Facility (ATF) at Brookhaven National Laboratory. Variables of time along the linac macropulse, such as field or phase are discretized and represented as vectors. Upon turn-on or after a large change in the operating-point, the control system acquires the response of the system to test signal vectors and generates a linearized system response matrix. During operation an error vector is generated by comparing the linac variable vectors and a target vector. The error vector is multiplied by the inverse of the system's matrix to generate a correction vector is added to an operating point vector. This control system can be used to control a klystron to produce flat rf amplitude and phase pulses, to control a rf cavity to reduce the rf field fluctuation, and to compensate the energy spread among bunches in a rf linac. Beam loading effects can be corrected and a programmed ramp can be produced. The performance of the control system has been evaluated on the control of a klystron's output as well as an rf cavity. Both amplitude and phase have been regulated simultaneously. In initial tests, the rf output from a klystron has been regulated to an amplitude fluctuation of less than ±0.3% and phase variation of less than ±0.6°. The rf field of the ATF's photo-cathode microwave gun cavity has been regulated to ±0.5% in amplitude and simultaneously to ±1° in phase. Regulating just the rf field amplitude in the rf gun cavity, we have achieved amplitude fluctuation of less than ±0.2%.

  13. BEAM POSITION AND PHASE MONITORS FOR THE LANSCE LINAC

    SciTech Connect

    McCrady, Rodney C.; Gilpatrick, John D.; Power, John F.

    2011-01-01

    New beam-position and phase monitors are under development for the linac at the Los Alamos Neutron Science Center (LANSCE). Transducers have been designed and are being fabricated. We are considering many options for the electronic instrumentation to process the signals and provide position and phase data with the necessary precision and flexibility to serve the various required functions. We'll present the various options under consideration for instrumentation along with the advantages and shortcomings of these options.

  14. A Linac afterburner to supercharge the Fermilab booster

    SciTech Connect

    Charles M Ankenbrandt et al.

    2002-10-21

    A Linac Afterburner is proposed to raise the energy of the beam injected into the Femrilab Booster from 400 MeV to about 600 MeV, thereby alleviating the longitudinal and transverse space-charge effects at low energy that currently limit its performance. The primary motivation is to increase the integrated luminosity of the Tevatron Collider in Run II, but other future programs would also recap substantial benefits. The estimated cost is $23M.

  15. Simulation of waveguide FEL oscillator using RF linac

    SciTech Connect

    Kuruma, S.; Asakawa, M.; Imasaki, K.

    1995-12-31

    One dimensional multifrequency simulation code for waveguide mode FEL has been developed. Using this simulation code, we analyzed the spontaneous emission from electron micropulse from RF Linac. It is found that some parameters both high and low frequency waveguide modes are growing simultaneously, so the two radiation pulses are generated and amplified. And the experimental data for cavity length detuning of the radiation power are analyzed.

  16. BEAM POSITION AND PHASE MONITORS FOR THE LANSCE LINAC

    SciTech Connect

    McCrady, Rodney C.; Gilpatrick, John D.; Watkins, Heath A.

    2012-04-11

    New beam-position and phase monitors are under development for the linac at the Los Alamos Neutron Science Center (LANSCE.) Transducers have been designed and are being installed. We are considering many options for the electronic instrumentation to process the signals and provide position and phase data with the necessary precision and flexibility to serve the various required functions. We'll present the various options under consideration for instrumentation along with the advantages and shortcomings of these options.

  17. Beam based alignment of sector-1 of the SLC linac

    SciTech Connect

    Emma, P.

    1992-03-01

    A technique is described which uses the beam to simultaneously measure quadrupole magnet and beam position monitor (BPM) transverse misalignments. The technique is applied to sector-1 of the SLC linac where simultaneous acceleration of electron and positron beams with minimal steering elements and BPMs makes quadrupole alignment critical for high transmission of the large transverse emittance positron beam. Simulation results as well as measurements are presented.

  18. HIGH DYNAMIC-RANGE HIGH SPEED LINAC CURRENT MEASUREMENTS

    SciTech Connect

    Deibele, Craig Edmond; Curry, Douglas E; Dickson, Richard W

    2012-01-01

    It is desired to measure the linac current of a charged particle beam with a consistent accuracy over a dynamic range of over 120 dB. Conventional current transformers suffer from droop, can be susceptible to electromagnetic interference (EMI), and can be bandwidth limited. A novel detector and electronics were designed to maximize dynamic range of about 120 dB and measure rise-times on the order of 10 nanoseconds.

  19. Longitudinal instability in heavy-ion-fusion induction linacs

    SciTech Connect

    Lee, E.P.

    1993-05-01

    A induction linac accelerating a high-current pulse of heavy ions at subrelativistic velocities is predicted to exhibit unstable growth of current fluctuations. An overview is given of the mode character, estimates of growth rates, and their application to an IFE driver. The present and projected effort to understand and ameliorate the instability is described. This includes particle-in-cell simulations, calculation and measurements of impedance, and design of feedback controls.

  20. A 10 MeV RF linac for industrial applications

    NASA Astrophysics Data System (ADS)

    Nayak, B.; Bhattacharjee, D.; Acharya, S.; Tillu, A. R.; Shivchandan; Chavan, R. B.; Choudhury, N.; Tiwari, R.

    2016-07-01

    This paper discusses the studies on a standing wave, biperiodic, on-axis coupled cavity RF linac operated at 2856 MHZ used for various industrial applications. Results of beam transmission experiments conducted in this accelerator have been presented. Analytical study and experimental verification of steady state beam loading in this facility have been explained. Finally some of the irradiation experiments performed in this system have been described.

  1. Literature Review on LINACs and FFAGs for Hadron Therapy

    NASA Astrophysics Data System (ADS)

    Verdú-Andrés, Silvia; Amaldi, Ugo; Faus-Golfe, Ángeles

    The document summarizes the recent papers, presentations and other public information on Radio-Frequency (RF) Linear Accelerators (linacs) and Fixed-Field Alternating-Gradient (FFAG) accelerators for hadron therapy. The main focus is on technical aspects of these accelerators. This report intends to provide a general overview of the state-of-the-art in those accelerators which could be used in short and middle-term for treating cancer.

  2. Diagnostics for the 400 MeV FNAL Linac

    SciTech Connect

    McCrory, E.S.; Lee, G.

    1991-02-01

    The last four 201 MHz alvarez tanks of the twenty-year-old, 200 MeV Fermilab Linac are being replaced by seven high-gradient (7 KV/m), high-frequency (805 MHz) side-coupled-cavity structures to produce a 400 MeV beam for injection into the Booster. Good, reliable beam diagnostics are an important factor in the success of this project. This paper discusses the diagnostic systems.

  3. Development of a commissioning plan for the APT linac

    SciTech Connect

    Funk, L.W.; Crandall, K.R.; Gilpatrick, J.D.; Gray, E.R.; Regan, A.H.; Rohlev, A.; Rybarcyk, L.J.; Wangler, T.P.

    1998-12-31

    The Accelerator Production of Tritium (APT) facility is based on a linac which incorporates both normal-conducting and superconducting RF technology and accelerates a 100-mA cw proton beam to an energy of 1,030 MeV or higher, depending on the desired production rate. Commissioning plans to achieve full power operation with minimum beam-induced activation of components have been evolving. This paper presents the main issues and the basic approaches that are now being discussed.

  4. On radiation protection at the LINAC-800 linear electron accelerator

    NASA Astrophysics Data System (ADS)

    Balalykin, N. I.; Minashkin, V. F.; Nozdrin, M. A.; Shirkov, G. D.; Schegolev, V. Yu.

    2012-07-01

    The Automatic System of Radiation Safety Control (ASRSC) of the LINAC-800 linear electron accelerator is designed to ensure radiation safety for accelerator personnel during regular operations and in emergency cases. The results of calculating the emission power used to develop the ARPS are given. Both hardware and software components of the radiation control system are described. This paper also presents a description of the interlock and signalization system.

  5. Accelerator mass spectrometry with a coupled tandem-linac system

    SciTech Connect

    Kutschera, W.

    1984-01-01

    A coupled system provides higher energies, which allows one to extend AMS to hitherto untouched mass regions. Another important argument is that the complexity, although bothersome for the operation, increases the selectivity of detecting a particular isotope. The higher-energy argument holds for any heavy-ion accelerator which is capable of delivering higher energy than a tandem. The present use of tandem-linac combinations for AMS, rather than cyclotrons, linacs or combinations of these machines, has mainly to do with the fact that this technique was almost exclusively developed around tandem accelerators. Therefore the tandem-linac combination is a natural extension to higher energies. The use of negative ions has some particular advantages in suppressing background from unwanted elements that do not form stable negative ions (e.g., N, Mg, Ar). On the other hand, this limits the detection of isotopes to elements which do form negative ions. For particular problems it may therefore be advantageous to use a positive-ion machine. What really matters most for choosing one or the other machine is to what extent the entire accelerator system can be operated in a truly quantiative way from the ion source to the detection system. 20 references, 4 figures.

  6. Reliability and availability studies in the RIA driver linac.

    SciTech Connect

    Lessner, E. S.; Ostroumov, P. N.; Physics

    2005-01-01

    The Rare Isotope Accelerator (RIA) facility will include various complex systems and must provide radioactive beams to many users simultaneously. The availability of radioactive beams for most experiments at the fully-commissioned facility should be as high as possible within design cost limitations. To make a realistic estimate of the achievable reliability a detailed analysis is required. The RIA driver linac is a complex machine containing a large number of superconducting (SC) resonators and capable of accelerating multiple-charge-state beams [1]. At the pre-CDR stage of the design it is essential to identify critical facility subsystem failures that can prevent the driver linac from operating. The reliability and availability of the driver linac were studied using expert information and data from operating machines such as ATLAS, APS, JLab, and LANL. Availability studies are performed with a Monte-Carlo simulation code previously applied to availability assessments of the NLC facility [2] and the results used to identify subsystem failures that most affect the availability and reliability of the RIA driver, and guide design iterations and component specifications to address identified problems.

  7. Transverse beam dynamics studies of a heavy ion induction linac

    SciTech Connect

    Garvey, T.; Eylon, S.; Fessenden, T.J.; Hahn, K.; Henestroza, E.; Keefe, D.

    1990-08-01

    The multiple beam induction linac experiment (MBE-4) was built to study the accelerator physics of the low energy, electrostatically focussed end of a driver for heavy ion inertial confinement fusion. In this machine four beams of Cs{sup +} ions are accelerated through 24 common induction gaps while being focussed in separate AG focussing channels. Each channel consists of a syncopated FODO lattice of 30 periods. We report results of the most recent studies of the transverse beam dynamics of a single drifting (180 keV) beam in this machine. The dependence of the emittance on the zero-current phase advance shows systematic variations which may be understood in the light of previous theoretical work on this topic. This result, unique to the beam parameters of a linac for heavy ion fusion, will be discussed in the context of its implications for a driver design. In addition we will discuss recent measurements of the motion of the beam centroid through the linac. These measurements, coupled with simulations, have proven to be a powerful tool in determining the presence of misalignment errors in the lattice of the accelerator. 6 refs., 3 figs.

  8. Electron Beam Focusing in the Linear Accelerator (linac)

    NASA Astrophysics Data System (ADS)

    Jauregui, Luis

    2015-10-01

    To produce consistent data with an electron accelerator, it is critical to have a well-focused beam. To keep the beam focused, quadrupoles (quads) are employed. Quads are magnets, which focus the beam in one direction (x or y) and defocus in the other. When two or more quads are used in series, a net focusing effect is achieved in both vertical and horizontal directions. At start up there is a 5% calibration error in the linac at Thomas Jefferson National Accelerator Facility. This means that the momentum of particles passing through the quads isn't always what is expected, which affects the focusing of the beam. The objective is to find exactly how sensitive the focusing in the linac is to this 5% error. A linac was simulated, which contained 290 RF Cavities with random electric fields (to simulate the 5% calibration error), and a total momentum kick of 1090 MeV. National Science Foundation, Department of Energy, Jefferson Lab, Old Dominion University.

  9. Commissioning the FELI linac and UV-FEL facility

    SciTech Connect

    Tomimasu, T.; Saeki, K.; Miyauchi, Y.

    1995-12-31

    The FELI 165-MeV linac and UV-FEL facility are in the commissioning, stage. A thermionic triode gun of the 6-MeV injector emits 500-ps pulses of 2.3A at 22.3125MHz. These pulses are compressed to 60AX 7ps by a 714-MHz prebuncher and a 2856-MHz buncher and seven ETL type accelerating waveguides with a length of 2.93m. The length of the linac including bending sections of two S-type BT systems for two undulators used for IR-FEL oscillations is 46m. The buncher and these accelerating waveguides are powered by two klystrons (E3729, 2856MHz, total 48MW, 24-{mu}s flat top long pulses). The flatness of our klystron modulator pulses is 0.067% at 24-{mu}s duration. An rf-ageing for new four accelerating waveguides will be started in May. An S-type BT line for 165-MeV beam from the linac will be installed in the end of April. A 2.68-m undulator ({lambda}u=4.0cm, N=67, Kmax gap length {ge}16mm) and an optical cavity (Lc=6.72m) will be installed early in July. The beam conditionings for UV-FEL experiments will be started in July.

  10. Recent improvements to software used for optimization of SRF linacs

    SciTech Connect

    Powers, Tom J.

    2014-12-01

    This work describes a software tool that allows one to vary parameters and understand the effects on the optimized costs of construction plus 10 year operations of an SRF linac, where operation costs includes the cost of the electrical utilities but not the labor or other costs. The program includes estimates for the associated cryogenic facility, and controls hardware. The software interface provides the ability to vary the cost of the different aspects of the machine as well as to change the cryomodule and cavity types. Additionally, this work will describe the recent improvements to the software that allow one to estimate the costs of energy-recovery based linacs and to enter arbitrary values of the low field Q0 and Q0 slope. The initial goal when developing the software was to convert a spreadsheet format to a graphical interface and to allow the ability to sweep different parameter sets. The tools also allow one to compare the cost of the different facets of the machine design and operations so as to better understand tradeoffs. An example of how it was used to independently investigate cost optimization tradeoffs for the LCLS-II linac will also be presented.

  11. Multiple-linac approach for tritium production and other applications

    SciTech Connect

    Ruggiero, A.G.

    1995-01-10

    This report describes an approach to tritium production based on the use of multiple proton linear accelerators. Features of a single APTT Linac as proposed by the Los Alamos National Laboratory are presented and discussed. An alternative approach to the attainment of the same total proton beam power of 200 MW with several lower-performance superconducting Linacs is proposed and discussed. Although each of these accelerators are considerable extrapolations of present technology, the latter can nevertheless be built at less technical risk when compared to the single high-current APT Linac, particularly concerning the design and the performance of the low-energy front-end. The use of superconducting cavities is also proposed as a way of optimizing the accelerating gradient, the overall length, and the operational costs. The superconducting technology has already been successfully demonstrated in a number of large-size projects and should be seriously considered for the acceleration of intense low-energy beams of protons. Finally, each linear accelerator would represent an ideal source of very intense beams of protons for a variety of applications, such as: weapons and waste actinide transmutation processes, isotopes for medical application, spallation neutron sources, and the generation of intense beams of neutrinos and muons for nuclear and high-energy physics research. The research community at large has obviously an interest in providing expertise for, and in having access to, the demonstration, the construction, the operation, and the exploitation of these top-performance accelerators.

  12. Relocatable cargo x-ray inspection systems utilizing compact linacs

    NASA Astrophysics Data System (ADS)

    Sapp, W. Wade; Mishin, Andrey V.; Adams, William L.; Callerame, Joseph; Grodzins, Lee; Rothschild, Peter J.; Schueller, Richard; Smith, Gerald J.

    2001-07-01

    Magnetron-powered, X-band linacs with 3-4 MeV capability are compact enough to be readily utilized in relocatable high energy cargo inspection systems. Just such a system is currently under development at AS&E™ using the commercially available ISOSearch™ cargo inspection system as the base platform. The architecture permits the retention of backscatter imaging, which has proven to be an extremely valuable complement to the more usual transmission images. The linac and its associated segmented detector will provide an additional view with superior penetration and spatial resolution. The complete system, which is housed in two standard 40' ISO containers, is briefly described with emphasis on the installation and operating characteristics of the portable linac. The average rf power delivered by the magnetron to the accelerator section can be varied up to the maximum of about 1 kW. The projected system performance, including radiation dose to the environment, will be discussed and compared with other high energy systems.

  13. Acceleration of high charge density electron beams in the SLAC linac

    SciTech Connect

    Sheppard, J.C.; Clendenin, J.E.; Jobe, R.K.; Lueth, V.G.; Millich, A.; Ross, M.C.; Seeman, J.T.; Stiening, R.F.

    1984-01-01

    The SLAC Linear Collider (SLC) will require both electron and positron beams of very high charge density and low emittance to be accelerated to about 50 GeV in the SLAC 3-km linac. The linac is in the process of being improved to meet this requirement. The program to accelerate an electron beam of high charge density through the first third of the SLC linac is described and the experimental results are discussed. 7 references, 5 figures.

  14. Studies of multipass beam breakup and energy recovery using the CEBAF injector linac

    SciTech Connect

    Sereno, N.S.; Cardman, L.S.; Krafft, G.A.; Sinclair, C.K.; Bisognano, J.J.

    1993-06-01

    Beam breakup (BBU) instabilities in superconducting linacs are a significant issue due to the potentially high Q values of the cavity higher order modes (HOMs). The CEBAF accelerator, which employs high CW current and 5-pass recirculation through two superconducting linacs, poses unique instability problems. An experimental investigation of multipass BBU along with energy recovery has been completed using a single recirculation through the CEBAF injector linac. Experimental results are compared with computer simulation of multipass BBU.

  15. Numerical simulations of stripping effects in high-intensity hydrogen ion linacs

    SciTech Connect

    Carneiro, J.-P.; Mustapha, B.; Ostroumov, P.N.; /Argonne

    2008-12-01

    Numerical simulations of H{sup -} stripping losses from blackbody radiation, electromagnetic fields, and residual gas have been implemented into the beam dynamics code TRACK. Estimates of the stripping losses along two high-intensity H{sup -} linacs are presented: the Spallation Neutron Source linac currently being operated at Oak Ridge National Laboratory and an 8 GeV superconducting linac currently being designed at Fermi National Accelerator Laboratory.

  16. High-Power Linac for the Spallation Neutron Source

    NASA Astrophysics Data System (ADS)

    Rej, D. J.

    2002-04-01

    The Spallation Neutron Source (SNS) will be the world’s most intense source of neutrons for fundamental science and industrial applications. Design and construction of this facility, located at Oak Ridge, is a joint venture between six DOE laboratories. Construction began in 1999 and is currently ahead of the scheduled 2006 completion date. Injecting a high-power, pulsed proton beam into a mercury target produces neutrons. In this talk, we review the physics requirements, design, and status of the construction of the 1-GeV, 1.4-MW average power RF linac for SNS. The accelerator consists of a drift tube linac (DTL), a coupled-cavity linac (CCL), and a superconducting rf (SRF) linac. The phase and quadrupole settings are set to avoid structure and parametric resonances, with coherent resonances posing minimal risk for emittance growth. The DTL is 37 m long and accelerates the ions to 87 MeV. The CCL is 55 m long and accelerates the ions to 186 MeV. The rf structure design and stability for both the DTL and CCL have been validated with scale models. The SRF linac has a modular design to accelerate ions to 1000 MeV, with a straightforward upgrade to 1.3 GeV at a later date. 3D particle-in-cell simulations of beam dynamics are performed to validate performance. The accelerator utilizes 93 MW of pulsed power operating continuously at 60-Hz with an 8factor. Approximately one hundred 402.5 or 805-MHz klystrons, with outputs between 0.55 and 5 MW, are used. The klystrons are powered by a novel converter-modulator that takes advantage of recent advances in IGBT switch plate assemblies and low-loss material cores for boost transformer. Beam diagnostics include position, phase, profile, and current monitors. They are designed to enable accurate beam steering and matching, and to minimize beam loss that would lead to activation and prevent hands-on maintenance.

  17. The Boeing 120 MeV RF linac for FEL research

    SciTech Connect

    Adamski, J.L.; Gallagher, W.J.; Kennedy, R.C.; Robinson, B.; Shoffstall, D.R.; Tyson, E.L.; Vetter, A.M.; Yeremian, A.D.

    1985-10-01

    A new electron linac for high power, visible wavelength, free electron laser research is under construction at the Boeing Radiation Laboratory in Seattle. The linac is a five section, traveling wave, L band structure with a specialized ''comb'' pulse format of widely separated high charge micropulses. The paper describes the accelerator design and prototyping of key components of the linac. These include a double subharmonic injector and a long pulse phase and amplitude stabilized RF source which have been tested on Boeing's 20 MeV S band linac.

  18. The Muon LINAC for the International Design Study of the Neutrino Factory

    SciTech Connect

    A. Kurup, C. Bontoiu, Morteza Aslaninejad, J. Pozimski, A. Bogacz, V.S. Morozov, Y.R. Roblin, K.B. Beard

    2011-09-01

    The first stage of muon acceleration in the Neutrino Factory utilises a superconducting linac to accelerate muons from 244 MeV to 900 MeV. The linac was split into three types of cryomodules with decreasing magnetic fields and increasing amounts of RF voltage but with the design of the superconducting solenoid and RF cavities being the same for all cryomodules. The current status of the muon linac for the International Design Study for the Neutrino Factory will be presented including a final lattice design of the linac and tracking simulations.

  19. TU-C-BRE-03: Aggregation of Linac Measurement Data

    SciTech Connect

    Kerns, J; Alvarez, P; Followill, D; Lowenstein, J; Molineu, A; Summers, P; Kry, S

    2014-06-15

    Purpose: Accurate data of linear accelerator radiation characteristics is important for treatment planning system commissioning as well as regular quality assurance of the machine. The RPC has performed site visits of numerous machines . Data gathered from Varian machines from the past 15 years are presented. The data collected can be used as a secondary check or when commissioning a new machine to verify that values are reasonable. Methods: Data from the past 15 years of RPC site visits was compiled and analyzed. Data was composed from measurements from approximately 400 Varian machines. Each dataset consists of several point measurements at various locations in a water phantom to measure percentage depth dose, output factors, including small MLC fields, off-axis factors, and wedge factors if applicable. Common statistical values are presented for each machine type. Where applicable, data was compared to other reference data given by the vendor or a select number of previous researchers. Results: Data is separated by energy and parameter and then analyzed by machine class. Data distributions of the parameter data were normal except occasionally at the tails. Distributions of the data for each class and parameter are tabulated to give not simply a singular reference value, but metrics about the distribution: 5th and 95th percentile values and the standard deviation as well as the median. Conclusion: The RPC has collected numerous data on Varian linacs and presented the finding of the past 15 years. The data can be used as a reference data set for physicists to compare against. A linac that deviates from the values does not necessarily indicate there is a problem as long as the treatment planning system correlates to the machine. Comparison of linac and treatment planning system data to external reference data can prevent serious treatment errors.

  20. Status of the Kansas State University superconducting linac project

    NASA Astrophysics Data System (ADS)

    Gray, Tom J.

    1986-05-01

    Funding for the construction of the superconducting linac at Kansas State University was approved by the Department of Energy on May 15, 1985. The project is funded out of the Division of Chemical Sciences, USDOE. Initial design and staff technical training was initiated during 1984-85 with laboratory personnel working at both Florida State University and Argonne National Laboratory. The linac under construction is based upon the Nb split-ring resonator technology developed at Argonne National Laboratory for ATLAS. The linac at Kansas State University will have 14 superconducting resonators with nine low-β (β=0.06) and five high-β (β=0.105) units operating at 97 MHz. Work has progressed on both of the single-resonator cryostats for time bunching and energy rebunching, respectively, with the major cryostat components presently under construction by C. E. Raymond Enterprise Manufacturing, a division of Combustion Engineering, with scheduled delivery of the single resonator cryostat vacuum housings, LN2-cooled heat shields, and LHe Dewars on January 17, 1986. Orders for all Nb-clad Cu resonators have been placed with Argonne National Laboratory and two low-β units are currently under construction. Requests for quotations for a 300-W LHe refrigerator (expandable to 500 W) 1000-l storage Dewar and LHe distribution system have been issued. The building addition which includes a new accelerator/experimental hall (˜6000 ft2 basement structure) and ground-level laboratory support space including additional experimental setup space, additional machine shop space, and mechanical equipment space, is currently under construction with a completion date scheduled for May 1986. Additional personnel training on LHe refrigeration systems is scheduled for January 1986, at the Texas Accelerator Center and at Florida State University.

  1. Large dynamic range diagnostics for high current electron LINACs

    SciTech Connect

    Evtushenko, P.

    2013-11-07

    The Jefferson Lab FEL driver accelerator - Energy Recovery Linac has provided a beam with average current of up to 9 mA and beam energy of 135 MeV. The high power beam operations have allowed developing and testing methods and approaches required to set up and tune such a facility simultaneously for the high beam power and high beam quality required for high performance FEL operations. In this contribution we briefly review this experience and outline problems that are specific to high current - high power non-equilibrium linac beams. While the original strategy for beam diagnostics and tuning have proven to be quite successful, some shortcomings and unresolved issues were also observed. The most important issues are the non-equilibrium (non-Gaussian) nature of the linac beam and the presence of small intensity - large amplitude fraction of the beam a.k.a. beam halo. Thus we also present a list of the possible beam halo sources and discuss possible mitigations means. We argue that for proper understanding and management of the beam halo large dynamic range (>10{sup 6}) transverse and longitudinal beam diagnostics can be used. We also present results of transverse beam profile measurements with the dynamic range approaching 10{sup 5} and demonstrate the effect the increased dynamic range has on the beam characterization, i.e., emittance and Twiss parameters measurements. We also discuss near future work planned in this field and where the JLab FEL facility will be used for beam tests of the developed of new diagnostics.

  2. Large dynamic range diagnostics for high current electron LINACs

    SciTech Connect

    Evtushenko, Pavel

    2013-11-01

    The Jefferson Lab FEL driver accelerator - Energy Recovery Linac has provided a beam with average current of up to 9 mA and beam energy of 135 MeV. The high power beam operations have allowed developing and testing methods and approaches required to set up and tune such a facility simultaneously for the high beam power and high beam quality required for high performance FEL operations. In this contribution we briefly review this experience and outline problems that are specific to high current - high power non-equilibrium linac beams. While the original strategy for beam diagnostics and tuning have proven to be quite successful, some shortcomings and unresolved issues were also observed. The most important issues are the non-equilibrium (non-Gaussian) nature of the linac beam and the presence of small intensity - large amplitude fraction of the beam a.k.a. beam halo. Thus we also present a list of the possible beam halo sources and discuss possible mitigations means. We argue that for proper understanding and management of the beam halo large dynamic range (>10{sup 6}) transverse and longitudinal beam diagnostics can be used. We also present results of transverse beam profile measurements with the dynamic range approaching 10{sup 5} and demonstrate the effect the increased dynamic range has on the beam characterization, i.e., emittance and Twiss parameters measurements. We also discuss near future work planned in this field and where the JLab FEL facility will be used for beam tests of the developed of new diagnostics.

  3. Use of the delta-t method for setting rf phase and amplitude for the AHF linac

    SciTech Connect

    Swain, G.R.

    1989-01-01

    The delta-t procedure is a time-of-flight method of finding set points for the rf phase and amplitude for each module of a linac. Expected errors for LAMPF afterburner linacs which might be used for an advanced hadron facility (AHF) are calculated. The modified delta-t procedure used on modules 13 through 48 of the present linac appears adequate to set up the proposed AHF linacs. 24 refs., 7 figs., 1 tab.

  4. LHC and VLHC Based ep Colliders: e-Linac versus e-Ring

    NASA Astrophysics Data System (ADS)

    Gladilin, L.; Karadeniz, H.; Recepoglu, E.; Sultansoy, S.

    2007-06-01

    Linac-ring analogues of the LHC and VLHC based standard type ep collider proposals are discussed. It is shown that sufficiently high luminosities can be obtained with TESLA like linacs, whereas essential modifications are required for CLIC technology. The physics search potential of proposed ep colliders is demonstrated using pair production of heavy quarks as an example.

  5. WE-D-BRD-01: Innovation in Radiation Therapy Delivery: Advanced Digital Linac Features

    SciTech Connect

    Xing, L; Wong, J; Li, R

    2014-06-15

    Last few years has witnessed significant advances in linac technology and therapeutic dose delivery method. Digital linacs equipped with high dose rate FFF beams have been clinically implemented in a number of hospitals. Gated VMAT is becoming increasingly popular in treating tumors affected by respiratory motion. This session is devoted to update the audience with these technical advances and to present our experience in clinically implementing the new linacs and dose delivery methods. Topics to be covered include, technical features of new generation of linacs from different vendors, dosimetric characteristics and clinical need for FFF-beam based IMRT and VMAT, respiration-gated VMAT, the concept and implementation of station parameter optimized radiation therapy (SPORT), beam level imaging and onboard image guidance tools. Emphasis will be on providing fundamental understanding of the new treatment delivery and image guidance strategies, control systems, and the associated dosimetric characteristics. Commissioning and acceptance experience on these new treatment delivery technologies will be reported. Clinical experience and challenges encountered during the process of implementation of the new treatment techniques and future applications of the systems will also be highlighted. Learning Objectives: Present background knowledge of emerging digital linacs and summarize their key geometric and dosimetric features. SPORT as an emerging radiation therapy modality specifically designed to take advantage of digital linacs. Discuss issues related to the acceptance and commissioning of the digital linacs and FFF beams. Describe clinical utility of the new generation of digital linacs and their future applications.

  6. Dedicated Linac for Radioneurosurgery at the National Institute of Neurology and Neurosurgery of Mexico

    NASA Astrophysics Data System (ADS)

    Celis-López, Miguel A.; Lárraga-Gutiérrez, José M.

    2003-09-01

    The objective is to present a description and the main clinical applications of this dedicated Linac for benign and malignant tumors in the central nervous system. The Novalis (BrainLab, Germany) is a 6 MV dedicated linac for a single high dose Radiosurgery (RS) and for fractionated doses in Stereotactic Radiotherapy with a high level of precision at the isocenter.

  7. Nuclear burning-up of RAW in blanket of linac-driven

    SciTech Connect

    Beljakov, M.S.; Logashev, O.N.; Lopatkin, A.V.; Tocheny, L.V.; Khrjastov, H.A.; Blagovolin, P.P.; Kazaritsky, V.D.

    1993-12-31

    The progress in the field of designing and constructing a heavy-current proton linear accelerator became noticeable last year and allows one to count on large-scale industrial linac application. Symbiosis of linac and subcritical reactor as target has new opportunities for energetics. This accelerator concept is described.

  8. Cumulative beam breakup in radio-frequency linacs

    SciTech Connect

    Bohn, C.L.; Delayen, J.R.

    1990-01-01

    An analytic model of cumulative beam breakup has been developed which is applicable to both low-velocity ion and high-energy electron linear accelerators. The model includes arbitrary velocity, acceleration, focusing, initial conditions, beam-cavity resonances, and variable cavity geometry and spacing along the accelerator. The model involves a continuum approximation'' in which the transverse kicks in momentum imparted by the cavities are smoothed over the length of the linac. The resulting equation of transverse motion is solved via the WKBJ method. Specific examples are discussed which correspond to limiting cases of the solution. 16 refs.

  9. A microwave power driver for linac colliders: Gigatron

    SciTech Connect

    Bizek, H.M.; Elliott, S.M.; McIntyre, P.M.; Nassiri, A.; Popovic, M.B.; Raparia, D.; Gray, H.F. . Dept. of Physics; Naval Research Lab., Washington, DC )

    1988-11-18

    The gigatron is a new rf amplifier tube designed for linac collider applications. Three design features permit extension of the lasertron concept to very high frequencies. First, a gated field-emitter array is employed for the modulated cathode. Second, a ribbon beam geometry mitigates space charge depression and facilitates efficient output coupling. Third, a traveling wave output coupler is used to obtain optimum coupling to the ribbon beam. This paper describes recent developments in the gigatron design, and progress towards experimental tests. 9 refs., 8 figs., 1 tab.

  10. Optical laser systems at the Linac Coherent Light Source

    PubMed Central

    Minitti, Michael P.; Robinson, Joseph S.; Coffee, Ryan N.; Edstrom, Steve; Gilevich, Sasha; Glownia, James M.; Granados, Eduardo; Hering, Philippe; Hoffmann, Matthias C.; Miahnahri, Alan; Milathianaki, Despina; Polzin, Wayne; Ratner, Daniel; Tavella, Franz; Vetter, Sharon; Welch, Marc; White, William E.; Fry, Alan R.

    2015-01-01

    Ultrafast optical lasers play an essential role in exploiting the unique capabilities of recently commissioned X-ray free-electron laser facilities such as the Linac Coherent Light Source (LCLS). Pump–probe experimental techniques reveal ultrafast dynamics in atomic and molecular processes and reveal new insights in chemistry, biology, material science and high-energy-density physics. This manuscript describes the laser systems and experimental methods that enable cutting-edge optical laser/X-ray pump–probe experiments to be performed at LCLS. PMID:25931064