Science.gov

Sample records for metalliques supportees pour

  1. Modelisation de la diffusion sur les surfaces metalliques: De l'adatome aux processus de croissance

    NASA Astrophysics Data System (ADS)

    Boisvert, Ghyslain

    Cette these est consacree a l'etude des processus de diffusion en surface dans le but ultime de comprendre, et de modeliser, la croissance d'une couche mince. L'importance de bien mai triser la croissance est primordiale compte tenu de son role dans la miniaturisation des circuits electroniques. Nous etudions ici les surface des metaux nobles et de ceux de la fin de la serie de transition. Dans un premier temps, nous nous interessons a la diffusion d'un simple adatome sur une surface metallique. Nous avons, entre autres, mis en evidence l'apparition d'une correlation entre evenements successifs lorsque la temperature est comparable a la barriere de diffusion, i.e., la diffusion ne peut pas etre associee a une marche aleatoire. Nous proposons un modele phenomenologique simple qui reproduit bien les resultats des simulations. Ces calculs nous ont aussi permis de montrer que la diffusion obeit a la loi de Meyer-Neldel. Cette loi stipule que, pour un processus active, le prefacteur augmente exponentiellement avec la barriere. En plus, ce travail permet de clarifier l'origine physique de cette loi. En comparant les resultats dynamiques aux resultats statiques, on se rend compte que la barriere extraite des calculs dynamiques est essentiellement la meme que celle obtenue par une approche statique, beaucoup plus simple. On peut donc obtenir cette barriere a l'aide de methodes plus precises, i.e., ab initio, comme la theorie de la fonctionnelle de la densite, qui sont aussi malheureusement beaucoup plus lourdes. C'est ce que nous avons fait pour plusieurs systemes metalliques. Nos resultats avec cette derniere approche se comparent tres bien aux resultats experimentaux. Nous nous sommes attardes plus longuement a la surface (111) du platine. Cette surface regorge de particularites interessantes, comme la forme d'equilibre non-hexagonale des i lots et deux sites d'adsorption differents pour l'adatome. De plus, des calculs ab initio precedents n'ont pas reussi a confirmer la

  2. Conception et caracterisation d'un magnetoplasma produit par une onde de surface pour la pulverisation d'echantillons solides

    NASA Astrophysics Data System (ADS)

    Masse, Louis Philippe

    Suite a l'extraordinaire explosion de l'informatique de la derniere decennie, la science et la technologie des materiaux ont pris un essor extraordinaire. Par exemple, il est devenu crucial de concevoir des materiaux a haut degre de purete. Ce besoin a fortement motive le developpement de methodes d'analyse de solides. Traditionnellement, la methode adoptee est l'analyse par torche ICP, mais pour de nombreuses raisons, dont la lenteur de cette methode, la communaute scientifique oeuvrant en chimie analytique recherche des techniques d'analyse de solides directes, rapides et plus sensibles. Parmi les voies possibles, on trouve les methodes basees sur la pulverisation par plasma. Dans ce contexte, nous avons etudie la possibilite et la pertinence d'utiliser un magnetoplasma entretenu par une onde de surface pour pulveriser des solides dans le but de les analyser. Nos travaux portent principalement sur l'etude du comportement du plasma lors de la pulverisation. Nous avons montre que la pulverisation affecte la decharge de diverses facons. En premier lieu, la concentration d'especes provenant du materiau pulverise dans le plasma augmente avec la tension de polarisation. De plus, la concentration d'especes pulverisees diminue lorsque la pression croit, possiblement a cause du redepot. Nous avons aussi montre qu'il etait possible de pulveriser des solides isolants en exploitant le phenomene d'autopolarisation du a l'application d'une tension RF. Nous avons aussi etudie l'effet de la pulverisation sur la temperature et la densite electronique. Ainsi, lors de la pulverisation de metaux tels que le cuivre, la temperature electronique diminue lorsque la tension de polarisation augmente. Ceci est attribuable a l'augmentation de la densite d'especes metalliques neutres facilement ionisables par impact electronique. Nous avons aussi note que la densite electronique augmente avec la concentration d'especes metalliques dans le plasma, ce qui resulte d'un meilleur bilan de

  3. Developpement de techniques numeriques pour l'estimation, la modelisation et la prediction de proprietes thermodynamiques et structurales de systems metalliques a fort ordonnancement chimique

    NASA Astrophysics Data System (ADS)

    Harvey, Jean-Philippe

    In this work, the possibility to calculate and evaluate with a high degree of precision the Gibbs energy of complex multiphase equilibria for which chemical ordering is explicitly and simultaneously considered in the thermodynamic description of solid (short range order and long range order) and liquid (short range order) metallic phases is studied. The cluster site approximation (CSA) and the cluster variation method (CVM) are implemented in a new minimization technique of the Gibbs energy of multicomponent and multiphase systems to describe the thermodynamic behaviour of metallic solid solutions showing strong chemical ordering. The modified quasichemical model in the pair approximation (MQMPA) is also implemented in the new minimization algorithm presented in this work to describe the thermodynamic behaviour of metallic liquid solutions. The constrained minimization technique implemented in this work consists of a sequential quadratic programming technique based on an exact Newton’s method (i.e. the use of exact second derivatives in the determination of the Hessian of the objective function) combined to a line search method to identify a direction of sufficient decrease of the merit function. The implementation of a new algorithm to perform the constrained minimization of the Gibbs energy is justified by the difficulty to identify, in specific cases, the correct multiphase assemblage of a system where the thermodynamic behaviour of the equilibrium phases is described by one of the previously quoted models using the FactSage software (ex.: solid_CSA+liquid_MQMPA; solid1_CSA+solid2_CSA). After a rigorous validation of the constrained Gibbs energy minimization algorithm using several assessed binary and ternary systems found in the literature, the CVM and the CSA models used to describe the energetic behaviour of metallic solid solutions present in systems with key industrial applications such as the Cu-Zr and the Al-Zr systems are parameterized using fully consistent thermodynamic an structural data generated from a Monte Carlo (MC) simulator also implemented in the framework of this project. In this MC simulator, the modified embedded atom model in the second nearest neighbour formalism (MEAM-2NN) is used to describe the cohesive energy of each studied structure. A new Al-Zr MEAM-2NN interatomic potential needed to evaluate the cohesive energy of the condensed phases of this system is presented in this work. The thermodynamic integration (TI) method implemented in the MC simulator allows the evaluation of the absolute Gibbs energy of the considered solid or liquid structures. The original implementation of the TI method allowed us to evaluate theoretically for the first time all the thermodynamic mixing contributions (i.e., mixing enthalpy and mixing entropy contributions) of a metallic liquid (Cu-Zr and Al-Zr) and of a solid solution (face-centered cubic (FCC) Al-Zr solid solution) described by the MEAM-2NN. Thermodynamic and structural data obtained from MC and molecular dynamic simulations are then used to parameterize the CVM for the Al-Zr FCC solid solution and the MQMPA for the Al-Zr and the Cu-Zr liquid phase respectively. The extended thermodynamic study of these systems allow the introduction of a new type of configuration-dependent excess parameters in the definition of the thermodynamic function of solid solutions described by the CVM or the CSA. These parameters greatly improve the precision of these thermodynamic models based on experimental evidences found in the literature. A new parameterization approach of the MQMPA model of metallic liquid solutions is presented throughout this work. In this new approach, calculated pair fractions obtained from MC/MD simulations are taken into account as well as configuration-independent volumetric relaxation effects (regular like excess parameters) in order to parameterize precisely the Gibbs energy function of metallic melts. The generation of a complete set of fully consistent thermodynamic, physical and structural data for solid, liquid, and stoichiometric compounds and the subsequent parameterization of their respective thermodynamic model lead to the first description of the complete Al-Zr phase diagram in the range of composition [0 ≤ XZr ≤ 5 / 9] based on theoretical and fully consistent thermodynamic properties. MC and MD simulations are performed for the Al-Zr system to define for the first time the precise thermodynamic behaviour of the amorphous phase for its entire range of composition. Finally, all the thermodynamic models for the liquid phase, the FCC solid solution and the amorphous phase are used to define conditions based on thermodynamic and volumetric considerations that favor the amorphization of Al-Zr alloys.

  4. Caracterisation thermique de modules de refroidissement pour la photovoltaique concentree

    NASA Astrophysics Data System (ADS)

    Collin, Louis-Michel

    a la surface opposee du recepteur pour evacuer la chaleur injectee. Les resultats mettent egalement en evidence l'importance des interfaces thermiques et les avantages de diffuser la chaleur dans les couches metalliques avant de la conduire au travers des couches dielectriques du recepteur. Des recepteurs de multiples compositions ont ete caracterises, demontrant que les outils developpes peuvent definir la capacite de diffusion thermique. La repetabilite de la plateforme est evaluee par l'analyse de l'etendue des mesures repetees sur des echantillons selectionnes. La plateforme demontre une precision et reproductibilite de +/- 0.14 ° C/W. Ce travail fournit des outils pour la conception des recepteurs en proposant une mesure qui permet de comparer et d'evaluer l'impact thermique de ces recepteurs integres a uri module de refroidissement. Mots-cles : cellule solaire, photovoltaique, transfert de chaleur, concentration, resistances thermiques, plateforme de caracterisation, refroidissement

  5. Des ballons pour demain

    NASA Astrophysics Data System (ADS)

    Régipa, R.

    A partir d'une théorie sur la détermination des formes et des contraintes globales d'un ballon de révolution, ou s'en rapprochant, une nouvelle famille de ballons a été définie. Les ballons actuels, dits de ``forme naturelle'', sont calculés en général pour une tension circonférencielle nulle. Ainsi, pour une mission donnée, la tension longitudinale et la forme de l'enveloppe sont strictement imposées. Les ballons de la nouvelle génération sont globalement cylindriques et leurs pôles sont réunis par un câble axial, chargé de transmettre une partie des efforts depuis le crochet (pôle inférieur), directement au pôle supérieur. De plus, la zone latérale cylindrique est soumise à un faible champ de tensions circonférencielles. Ainsi, deux paramètres permettent de faire évoluer la distribution des tensions et la forme de l'enveloppe: - la tension du câble de liaison entre pôles (ou la longueur de ce câble) - la tension circonférencielle moyenne désirée (ou le rayon du ballon). On peut donc calculer et réaliser: - soit des ballons de forme adaptée, comme les ballons à fond plat pour le bon fonctionnement des montgolfières infrarouge (projet MIR); - soit des ballons optimisés pour une bonne répartition des contraintes et une meilleure utilisation des matériaux d'enveloppe, pour l'ensemble des programmes stratosphériques. Il s'ensuit une économie sensible des coûts de fabrication, une fiabilité accrue du fonctionnement de ces ballons et une rendement opérationnel bien supérieur, permettant entre autres, d'envisager des vols à très haute altitude en matériaux très légers.

  6. VIEW POURING PLATFORM SHOWING MOLD POURING JACKETS AND WEIGHTS AND, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW POURING PLATFORM SHOWING MOLD POURING JACKETS AND WEIGHTS AND, IN THE FOREGROUND, SAND RETURN FROM THE SHAKEOUT ACTUATING A SIMPLE LEVER SYSTEM THAT ADDED FRESH WATER TO THE SAND IN PREPARATION FOR ITS REUSE. - Southern Ductile Casting Company, Centerville Foundry, 101 Airport Road, Centreville, Bibb County, AL

  7. When It Rains, It Pours

    ERIC Educational Resources Information Center

    Mills, Linda

    2012-01-01

    "It's raining, it's pouring, the old man is snoring!" "The itsy, bitsy spider crawled up the waterspout, down came the rain and washed the spider out. Out came the sun and dried up all the rain, and the itsy, bitsy spider went up the spout again." What do children's nursery rhymes have to do with the school library? The author begins by telling a…

  8. Low pour crude oil compositions

    SciTech Connect

    Motz, K.L.; Latham, R.A.; Statz, R.J.

    1990-05-22

    This patent describes and improvement in the process of transporting waxy crude oils through a pipeline. It comprises: incorporating into the crude oil an effective pour point depressant amount of an additive comprising a polymer selected from the group consisting of copolymers of ethylene and acrylonitrile, and terpolymers of ethylene, acrylonitrile and a third monomer selected from the group consisting of vinyl acetate, carbon monoxide, alkyl acrylates, alkyl methacrylates, alkyl vinyl ethers, vinyl chloride, vinyl fluoride, acrylic acid, and methacrylic acid, wherein the amount of third monomer in the terpolymer ranges from about 0.1 to about 10.0 percent by weight.

  9. Une alternative au cobalt pour la synthese de nanotubes de carbone monoparoi par plasma inductif thermique

    NASA Astrophysics Data System (ADS)

    Carrier, Jean-Francois

    synthese de C-SWNT. Le produit final est par la suite recolte sur des filtres metalliques poreux, une fois le systeme mis a l'arret. Dans un premier temps, une analyse thermodynamique, calculee avec le logiciel Fact-Sage, a permis de mettre en lumiere l'etat des differentes produits et reactifs, tout au long de leur passage dans le systeme. Elle a permis de reveler la similitude de composition de la phase liquide du melange catalytique ternaire de base, avec celui du melange binaire, avec nickel et oxyde d'yttrium. Par la suite, une analyse du bilan d'energie, a l'aide d'un systeme d'acquisition de donnees, a permis de determiner que les conditions operatoires des cinq echantillons mis a l'essai etaient similaires. Au total, le produit final a ete caracterise a l'aide de six methodes de caracterisations differentes : l'analyse thermogravimetrique, la diffraction de rayons X, la microscopie electronique a balayage a haute resolution (HRSEM), la microscopie electronique a transmission (MET), la spectroscopie RAMAN, ainsi que la mesure de la surface specifique (BET). Les resultats de ces analyses ont permis de constater, de facon coherente, que le melange a base de molybdene etait celui qui produisait la moins bonne qualite de produit. Ensuite, en ordre croissant, s'en suivait du melange a base de MnO2 et de ZrO2. Le melange de reference, a base de cobalt, est au deuxieme rang en matiere de qualite. La palme revient au melange binaire, dont la proportion est double en nickel. Les resultats de ce travail de recherche permettent d'affirmer qu'il existe une alternative performante au cobalt pour effectuer la synthese de nanotubes de carbone monoparoi, par plasma inductif thermique. Cette alternative est l'utilisation d'un melange catalytique binaire a base de nickel et d'oxyde d'yttrium. Il est suggere que les performances plus faibles des recettes alternatives, moins performantes, pourraient etre expliquees par le profil thermique fixe du reacteur. Ceci pourrait favoriser

  10. INTERIOR VIEW, LOOKING WEST, WITH CRANE OPERATOR, TED SEALS, POURING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW, LOOKING WEST, WITH CRANE OPERATOR, TED SEALS, POURING MOLTEN METAL INTO A 1,300 TON ELECTRIC HOLDING FURNACE OR MIXER. AN ELECTRONIC SCALE RECORDED THAT 50.5 TONS OF METAL WERE POURED INTO THE FURNACE DURING THIS POUR. - American Cast Iron Pipe Company, Mixer Building, 1501 Thirty-first Avenue North, Birmingham, Jefferson County, AL

  11. A Statistical Treatment of Bioassay Pour Fractions

    NASA Technical Reports Server (NTRS)

    Barengoltz, Jack; Hughes, David W.

    2014-01-01

    The binomial probability distribution is used to treat the statistics of a microbiological sample that is split into two parts, with only one part evaluated for spore count. One wishes to estimate the total number of spores in the sample based on the counts obtained from the part that is evaluated (pour fraction). Formally, the binomial distribution is recharacterized as a function of the observed counts (successes), with the total number (trials) an unknown. The pour fraction is the probability of success per spore (trial). This distribution must be renormalized in terms of the total number. Finally, the new renormalized distribution is integrated and mathematically inverted to yield the maximum estimate of the total number as a function of a desired level of confidence ( P(pour fraction. The extension to recovery efficiency corrections is also presented. Now the product of recovery efficiency and pour fraction may be small enough that the likely value may be much larger than the usual calculation: the number of spores divided by that product. The use of this analysis would not be limited to microbiological data.

  12. First come, first served. Does pouring sequence matter for consumption?

    PubMed

    Stroebele-Benschop, Nanette; Dieze, Anastasia; Hilzendegen, Carolin

    2016-10-01

    Various environmental factors associated with eating and drinking affect people's food choice and food intake. Lately, the role of tableware has been studied in more detail. The aim of this study was to determine whether pouring sequence of food components affects portion size. Study 1 invited participants to pour a beverage containing both apple juice and sparkling water. Pouring apple juice first increased juice by almost 25% compared to pouring water first. Pouring water first increased water by almost 19% compared to pouring juice first confirming our hypothesis that pouring sequence affects the ratio poured. Study 2 asked participants to prepare themselves a snack containing cereals with milk. Within-subject comparisons revealed that pouring milk before cereals significantly increased both milk and cereal amounts resulting in larger overall portion size compared to pouring cereals before adding milk. Habitual tendencies for preparing foods causing a perception bias or a perception bias itself could be possible explanations for the divergent study findings. These findings show for the first time the influence of pouring and preparation sequence on portion size. PMID:27417334

  13. Plutonium Immobilization Program cold pour tests

    SciTech Connect

    Hovis, G.L.; Stokes, M.W.; Smith, M.E.; Wong, J.W.

    1999-07-01

    The Plutonium Immobilization Program (PIP) is a joint venture between the Savannah River Site, Lawrence Livermore National Laboratory, Argonne National Laboratory, and Pacific Northwest National Laboratory to carry out the disposition of excess weapons-grade plutonium. This program uses the can-in-canister (CIC) approach. CIC involves encapsulating plutonium in ceramic forms (or pucks), placing the pucks in sealed stainless steel cans, placing the cans in long cylindrical magazines, latching the magazines to racks inside Defense Waste Processing Facility (DWPF) canisters, and filling the DWPF canisters with high-level waste glass. This process puts the plutonium in a stable form and makes it attractive for reuse. At present, the DWPF pours glass into empty canisters. In the CIC approach, the addition of a stainless steel rack, magazines, cans, and ceramic pucks to the canisters introduces a new set of design and operational challenges: All of the hardware installed in the canisters must maintain structural integrity at elevated (molten-glass) temperatures. This suggests that a robust design is needed. However, the amount of material added to the DWPF canister must be minimized to prevent premature glass cooling and excessive voiding caused by a large internal thermal mass. High metal temperatures, minimizing thermal mass, and glass flow paths are examples of the types of technical considerations of the equipment design process. To determine the effectiveness of the design in terms of structural integrity and glass-flow characteristics, full-scale testing will be conducted. A cold (nonradioactive) pour test program is planned to assist in the development and verification of a baseline design for the immobilization canister to be used in the PIP process. The baseline design resulting from the cold pour test program and CIC equipment development program will provide input to Title 1 design for second-stage immobilization. The cold pour tests will be conducted in two

  14. FRONT VIEW OF POURING FROM #61 HOLDING FURNACE AT #02 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FRONT VIEW OF POURING FROM #61 HOLDING FURNACE AT #02 STATION INTO THREE VERTICAL MOLDS SUBMERGED IN A WATER-FILLED TANK BELOW THE CASTING FLOOR. THE CASTING CREW'S JOBS DURING THIS PHASE OF THE OPERATION INCLUDE REGULATING THE POURING RATE AND MONITORING THE VALVE RODS THAT CONTROL THE WATER SPRAYS ON THE MOLDS. DIFFERENT ALLOYS REQUIRE SPECIFIC POURING SPEEDS AND WATER PRESSURES. - American Brass Foundry, 70 Sayre Street, Buffalo, Erie County, NY

  15. Ondes de surface transverses sur plaques piézoélectriques avec réseaux de bandes metalliques déposés sur les 2 faces

    NASA Astrophysics Data System (ADS)

    Ballandras, S.; Gavignet, E.; Bigler, E.

    1995-09-01

    A theoretical model has been implemented to study surface transverse waves propagating on piezoelectric plates of finite thickness with thin metal strip gratings on both sides. Calculations have been performed for AT-cuts of quartz of thickness varying from 140 to 120 μm. The spatial period of the gratings was fixed to 20 μm (acoustic wavelength equal to 40 μm). The dispersion curve relating the angular frequency to the wavenumber presents more than one stopband as found in the usual analyses on semi-infinite substrates. These multiple high-frequency stopbands allow to design and realize high stability resonators or highly sensitive sensors for gravimetry, accelerometer applications, etc. Un modèle théorique a été mis en œuvre pour l'étude des propriétés des ondes de surface transverses se propageant sur des plaques piézoélectriques d'épaisseur finie avec des réseaux de fines bandes métalliques déposés sur chaque face. Les calculs ont été effectués pour des plaques de quartz voisines de la coupe AT et d'épaisseur variant de 140 à 120 μm. La périodicité des réseaux en regard a été fixée à 20 μm (longueur d'onde acoustique 40 μm). La courbe de dispersion reliant la pulsation au nombre d'ondes présente plusieurs bandes d'arrêt incluant celle habituellement mise en évidence pour un substrat semi-infini. L'existence de ces multiples bandes d'arrêt haute fréquence ouvre de nouvelles perspectives pour la réalisation de résonateurs ultrastables ou de capteurs de très grande sensibilité gravimétrique, accélérométrique, etc.

  16. A statistical treatment of bioassay pour fractions

    NASA Astrophysics Data System (ADS)

    Barengoltz, Jack; Hughes, David

    A bioassay is a method for estimating the number of bacterial spores on a spacecraft surface for the purpose of demonstrating compliance with planetary protection (PP) requirements (Ref. 1). The details of the process may be seen in the appropriate PP document (e.g., for NASA, Ref. 2). In general, the surface is mechanically sampled with a damp sterile swab or wipe. The completion of the process is colony formation in a growth medium in a plate (Petri dish); the colonies are counted. Consider a set of samples from randomly selected, known areas of one spacecraft surface, for simplicity. One may calculate the mean and standard deviation of the bioburden density, which is the ratio of counts to area sampled. The standard deviation represents an estimate of the variation from place to place of the true bioburden density commingled with the precision of the individual sample counts. The accuracy of individual sample results depends on the equipment used, the collection method, and the culturing method. One aspect that greatly influences the result is the pour fraction, which is the quantity of fluid added to the plates divided by the total fluid used in extracting spores from the sampling equipment. In an analysis of a single sample’s counts due to the pour fraction, one seeks to answer the question: What is the probability that if a certain number of spores are counted with a known pour fraction, that there are an additional number of spores in the part of the rinse not poured. This is given for specific values by the binomial distribution density, where detection (of culturable spores) is success and the probability of success is the pour fraction. A special summation over the binomial distribution, equivalent to adding for all possible values of the true total number of spores, is performed. This distribution when normalized will almost yield the desired quantity. It is the probability that the additional number of spores does not exceed a certain value. Of course

  17. A statistical treatment of bioassay pour fractions

    NASA Astrophysics Data System (ADS)

    Barengoltz, Jack; Hughes, David

    A bioassay is a method for estimating the number of bacterial spores on a spacecraft surface for the purpose of demonstrating compliance with planetary protection (PP) requirements (Ref. 1). The details of the process may be seen in the appropriate PP document (e.g., for NASA, Ref. 2). In general, the surface is mechanically sampled with a damp sterile swab or wipe. The completion of the process is colony formation in a growth medium in a plate (Petri dish); the colonies are counted. Consider a set of samples from randomly selected, known areas of one spacecraft surface, for simplicity. One may calculate the mean and standard deviation of the bioburden density, which is the ratio of counts to area sampled. The standard deviation represents an estimate of the variation from place to place of the true bioburden density commingled with the precision of the individual sample counts. The accuracy of individual sample results depends on the equipment used, the collection method, and the culturing method. One aspect that greatly influences the result is the pour fraction, which is the quantity of fluid added to the plates divided by the total fluid used in extracting spores from the sampling equipment. In an analysis of a single sample’s counts due to the pour fraction, one seeks to answer the question: What is the probability that if a certain number of spores are counted with a known pour fraction, that there are an additional number of spores in the part of the rinse not poured. This is given for specific values by the binomial distribution density, where detection (of culturable spores) is success and the probability of success is the pour fraction. A special summation over the binomial distribution, equivalent to adding for all possible values of the true total number of spores, is performed. This distribution when normalized will almost yield the desired quantity. It is the probability that the additional number of spores does not exceed a certain value. Of course

  18. APPARATUS FOR MELTING AND POURING METAL

    DOEpatents

    Harris, F.A.

    1958-02-25

    This patent relates to a crucible for melting and pouring a metal under controlled atmospheric conditions. The crucible has a frangible plug in the bottom and a retaining device to prevent the entrance of the broken portions of the plug into the mold without interfering with the flow of the melt. After the charge has been melted, a knockout rod is lowered through the charge and forced against the frangible plug sufficiently to break off the closure disk along a previously scored line. The disk drops onto a retaining grid large enough to permit the flow of metal around the disk and into the mold below. Thts arrangement elimnates the entry of broken portions of the plug into the mold, thereby elimnating a common cause of imperfect castings.

  19. Dependence of the pour point of diesel fuels on the properties of the initial components

    NASA Technical Reports Server (NTRS)

    Ostashov, V. M.; Bobrovskiy, S. A.

    1979-01-01

    An analytical expression is obtained for the dependence of the pour point of diesel fuels on the pour point and weight relationship of the initial components. For determining the pour point of a multicomponent fuel mixture, it is assumed that the mixture of two components has the pour point of a separate equivalent component, then calculating the pour point of this equivalent component mixed with a third component, etc.

  20. POURING IRON FROM BULL LADLE INTO MOBILE LADLES USED TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    POURING IRON FROM BULL LADLE INTO MOBILE LADLES USED TO FILL MOLDS ON CONVEYOR LINES AFTER FERRO-SILICON IS ADDED TO ENHANCE DUCTILITY AND FLUIDITY. - Southern Ductile Casting Company, Casting, 2217 Carolina Avenue, Bessemer, Jefferson County, AL

  1. 6. VIEW LOOKING WEST FROM THE POURING AISLE OF THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW LOOKING WEST FROM THE POURING AISLE OF THE ELECTRIC FURNACE BUILDING AT ELECTRIC FURNACE X-3. - U.S. Steel Duquesne Works, Electric Furnace Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  2. 41. Casting floor, "B" furnace, pour in progress; mudgun is ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. Casting floor, "B" furnace, pour in progress; mudgun is to right of furnace; photo taken from furnace operator's booth. Looking south/southwest - Rouge Steel Company, 3001 Miller Road, Dearborn, MI

  3. 51. VIEW SHOWING THE POURING OF CAP ON PIER 7, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    51. VIEW SHOWING THE POURING OF CAP ON PIER 7, LOOKING WEST FROM BARGE, December 22, 1934 - Sacramento River Bridge, Spanning Sacramento River at California State Highway 275, Sacramento, Sacramento County, CA

  4. 13. MASS OF POURED CONCRETE IN IRREGULAR STEPPED LAYERS AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. MASS OF POURED CONCRETE IN IRREGULAR STEPPED LAYERS AT THE BASE OF THE LEFT (EAST) BUTTRESS. CAMERA FACING SOUTHWEST. - Salinas Dam, Salinas River near Pozo Road, Santa Margarita, San Luis Obispo County, CA

  5. 45. EXPOSEDAGGREGATE CONCRETE AT NICHE, NORTH BOUNDARY, SEVERAL TEXTURES POURED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. EXPOSED-AGGREGATE CONCRETE AT NICHE, NORTH BOUNDARY, SEVERAL TEXTURES POURED AT ONE TIME, October 1987 - Meridian Hill Park, Bounded by Fifteenth, Sixteenth, Euclid & W Streets, Northwest, Washington, District of Columbia, DC

  6. 42. Casting floor, "B" furnace, pour in progress; mudgun is ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. Casting floor, "B" furnace, pour in progress; mudgun is to right of furnace; operator takes temperature of iron in trough during pout. Looking south - Rouge Steel Company, 3001 Miller Road, Dearborn, MI

  7. 100. photographer unknown 29 March 1940 PREPARATIONS FOR POURING CONCRETE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    100. photographer unknown 29 March 1940 PREPARATIONS FOR POURING CONCRETE AROUND PIT LINER OF UNIT NO 3. - Bonneville Project, Powerhouse No.1, Spanning Bradford Slough, from Bradford Island, Bonneville, Multnomah County, OR

  8. 47. Pouring deck columns, steampowered concrete mixer at center; direction ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    47. Pouring deck columns, steam-powered concrete mixer at center; direction of view not clear, but probably to north. - Parks Bar Bridge, Spanning Yuba River at State Highway 20, Smartville, Yuba County, CA

  9. POURING IRON FROM ELECTRIC FURNACE INTO BULL LADLE AFTER MAGNESIUM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    POURING IRON FROM ELECTRIC FURNACE INTO BULL LADLE AFTER MAGNESIUM HAD BEEN ADDED TO GENERATE DUCTILE IRON WHEN IT COOLS IN THE MOLD. - Southern Ductile Casting Company, Casting, 2217 Carolina Avenue, Bessemer, Jefferson County, AL

  10. PERSPECTIVE VIEW OF THE REX T. BARBER BRIDGE DECK POUR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PERSPECTIVE VIEW OF THE REX T. BARBER BRIDGE DECK POUR, VIEW TO NORTHWEST SHOWING HIGH LINE SYSTEM. - Rex T. Barber Veterans Memorial Bridge, Spanning Crooked River Gorge, Dalles-California Highway (US 97), Terrebonne, Deschutes County, OR

  11. PERSPECTIVE VIEW OF THE REX T. BARBER BRIDGE DECK POUR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PERSPECTIVE VIEW OF THE REX T. BARBER BRIDGE DECK POUR, VIEW TO NORTH. - Rex T. Barber Veterans Memorial Bridge, Spanning Crooked River Gorge, Dalles-California Highway (US 97), Terrebonne, Deschutes County, OR

  12. Decodeurs rapides pour codes topologiques quantiques

    NASA Astrophysics Data System (ADS)

    Duclos-Cianci, Guillaume

    L'encodage topologique de l'information quantique a attire beaucoup d'attention, car c'est un modele qui semble propice a resister aux erreurs locales. Tout d'abord, le modele du calcul topologique est base sur la statistique anyonique non-Abelienne universelle et sur son controle. Des anyons indesirables peuvent apparaitre soudainement, en raison de fluctuations thermiques ou de processus virtuels. La presence de ces anyons peut corrompre l'information encodee, il est necessaire de les eliminer: la correction consiste a fusionner les defauts tout en preservant la topologie du systeme. Ensuite, dans le cas des codes topologiques, on doit aussi proteger l'information encodee dans la topologie. En effet, dans ces systemes, on n'a acces qu'a une fraction de l'information decrivant l'erreur. Elle est recueillie par des mesures et peut etre interpretee en termes de particules. Ces defauts peuplent le code et doivent etre annihiles adequatement dans le but de preserver l'information encodee. Dans ce memoire, nous proposons un algorithme efficace, appele decodeur, pouvant etre utilise dans les deux contextes decrits ci-haut. Pour y parvenir, cet algorithme s'inspire de methodes de renormalisation et de propagation de croyance. Il est exponentiellement plus rapide que les methodes deja existantes, etant de complexite O (ℓ2 log ℓ) en serie et, si on parallelise, O (log ℓ) en temps, contre O (ℓ6) pour les autres decodeurs. Le temps etant le facteur limitant dans le probleme du decodage, cette caracteristique est primordiale. De plus, il tolere une plus grande amplitude de bruit que les methodes existantes; il possede un seuil de ˜ 16.5% sur le canal depolarisant surpassant le seuil deja etabli de ˜ 15.5%. Finalement, il est plus versatile. En effet, en etant limite au code de Kitaev, on ne savait pas decoder les codes topologiques de maniere generale (e.g. codes de couleur). Or, le decodeur propose dans ce memoire peut traiter la grande classe des codes

  13. Algorithmes et architectures pour ordinateurs quantiques supraconducteurs

    NASA Astrophysics Data System (ADS)

    Blais, Alexandre

    Depuis sa formulation, la theorie de l'information a ete basee, implicitement, sur les lois de la physique classique. Une telle formulation est toutefois incomplete puisqu'elle ne tient pas compte de la realite quantique. Au cours des vingt dernieres annees, l'expansion de la theorie de l'information englobant les effets purement quantiques a connu un interet grandissant. La realisation d'un systeme de traitement de l'information quantique, un ordinateur quantique, presente toutefois de nombreux defis. Dans ce document, on s'interesse a differents aspects concernant ces defis. On commence par presenter des concepts algorithmiques comme l'optimisation de calculs quantiques et le calcul quantique geometrique. Par la suite, on s'interesse au design et a differents aspects de l'utilisation de qubits bases sur les jonctions Josephson. En particulier, un nouveau design de qubit supraconducteur est suggere. On presente aussi une approche originale pour l'interaction entre qubits. Cette approche est tres generale puisqu'elle peut etre appliquee a differents designs de qubits. Finalement, on s'interesse a la lecture des qubits supraconducteurs de flux. Le detecteur suggere ici a l'avantage de pouvoir etre decouple du qubit lorsqu'il n'y a pas de mesure en cours.

  14. INVESTIGATION OF WASTE GLASS POURING PROCESS OVER A KNIFE EDGE

    SciTech Connect

    M.A. Ebadian, Ph.D.

    1999-01-01

    Vitrification is the process of capturing radioactive waste in glass. The Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) is one of the facilities using the vitrification technology to treat and immobilize radioactive waste. The objective of the project is to investigate the pouring behavior of molten glass over a pour spout knife edge. Experiments are run using simulant glass containing the same chemical formulation as the radioactive sludge glass, but without radioactive contaminants. The purpose of these tests is to obtain actual glass data that, when combined with previous cold data from other fluids, will provide an overall understanding of the physics of liquids flowing over a pour spout and knife edge, A specific objective is to verify computational fluid dynamics (CFD) models with a range of liquid data with particular emphasis on glass so as to provide confidence in use of these CFD models for designing a new improved pour spout for the DWPF melter. The work to be performed at FIU-HCET includes assembling the melting and pouring system that mimics the DWPF melter and determining the key parameters that may influence wicking. Information from the FIU-HCET melter tests will lead to better operating guidelines for the DWPF melter so as to avoid wicking. During FY98, a bench-scale melter complete with pour spout and a knife edge was designed and assembled at FIU-HCET. Initially, the system was tested with glycerine. Subsequently, glass provided by SRS was used for experimentation. Flow visualization tests were performed with the melter in FY98 to investigate the pouring behavior of molten glass over a pour spout model simulating a DWPF pour spout of the original design. Simulant glass containing the same chemical formulation as sludge glass but without radioactive contaminants was used in the tests. All the tasks and milestones mentioned in the PTP for the project were accomplished. The project completed its second year, and this document

  15. Reducing exposures during the pouring operations of a brass foundry.

    PubMed

    Edmonds, M A; Gressel, M G; O'Brien, D M; Clark, N J

    1993-05-01

    The focus of this exposure assessment and control technology study was a brass foundry and the lead exposures of workers involved in the transportation and pouring of metal. Controls in place at the foundry included ventilation systems at the furnace and along the continuous and stationary pouring lines. Real-time measurements were made to determine which tasks were the primary exposure sources, and a hand-held aerosol monitor was used to measure real-time aerosol exposures (as a surrogate for lead) in the workers' breathing zones. Data were collected over two 30-min sampling periods while worker activities were monitored using a video camera. Analysis of the data showed that the greatest aerosol exposures occurred during the transportation of an unventilated, full ladle, resulting in an average concentration of at least twice that of the other tasks. The study concluded that the addition of exhaust ventilation such as a moveable hood and duct system during the ladle transport and pouring tasks, and the implementation of a side draft hood at the pigging area, could result in a reduction of worker exposure to aerosols during the continuous pouring operation by up to 40%. The controls and techniques suggested in this study could be applied to pouring operations throughout the industry to reduce worker exposure to metal fumes. PMID:8498361

  16. Investigation of waste glass pouring behavior over a knife edge

    SciTech Connect

    Ebadian, M.A.

    1998-01-01

    The development of vitrification technology for converting radioactive waste into a glass solid began in the early 1960s. Some problems encountered in the vitrification process are still waiting for a solution. One of them is wicking. During pouring, the glass stream flows down the wall of the pour spout until it reaches an angled cut in the wall. At this point, the stream is supposed to break cleanly away from the wall of the pour spout and fall freely into the canister. However, the glass stream is often pulled toward the wall and does not always fall into the canister, a phenomenon known as wicking. Phase 1 involves the assembly, construction, and testing of a melter capable of supplying molten glass at operational flow rates over a break-off point knife edge. Phase 2 will evaluate the effects of glass and pour spout temperatures as well as glass flow rates on the glass flow behavior over the knife edge. Phase 3 will identify the effects on wicking resulting from varying the knife edge diameter and height as well as changing the back-cut angle of the knife edge. The following tasks were completed in FY97: Design the experimental system for glass melting and pouring; Acquire and assemble the melter system; and Perform initial research work.

  17. Algorithmes et architectures pour ordinateurs quantiques supraconducteurs

    NASA Astrophysics Data System (ADS)

    Blais, A.

    2003-09-01

    'utilisation de qubits basés sur les jonctions Josephson. On présente entre autres une approche originale pour l'interaction entre qubits. Cette approche est très générale puisqu'elle peut être appliquée à différents designs de qubits. Finalement, on s'intéresse à la lecture des qubits supraconducteurs de flux. Le détecteur suggéré ici a l'avantage de pouvoir être découplé du qubit lorsqu'il n'y a pas de mesure en cours.

  18. First Concrete Poured for NSLS-II Ring Building

    SciTech Connect

    Brookhaven Lab

    2009-07-20

    The first bits of the National Synchrotron Light Source II (NSLS-II) ring building are now taking shape after the concrete-pouring process for the new, world-class facility began on Monday, July 20. Once complete, the 400,000 square-foot building will hou

  19. Le sumatriptan intranasal pour la migraine chez les enfants

    PubMed Central

    Goldman, Ran D.; Meckler, Garth D.

    2015-01-01

    Résumé Question Je vois de plus en plus d’enfants et d’adolescents qui souffrent de céphalées pouvant se classer dans la catégorie des migraines. J’ai fait des lectures sur le sumatriptan par voie intranasale comme thérapie abortive. Est-ce un traitement efficace? Réponse La migraine aiguë chez les enfants et les adolescents est fréquente et difficile à traiter. Le sumatriptan intranasal est une option sûre et généralement efficace pour les enfants et les adolescents. La dose actuellement recommandée est de 20 mg pour les enfants qui pèsent plus de 40 kg et de 10 mg pour ceux dont le poids se situe entre 20 et 39 kg. Il faudrait faire des études de plus grande envergure pour contrecarrer les limitations des échantillons de petite taille et mieux comprendre la faible concentration plasmique et les effets placebo observés dans les études jusqu’à présent.

  20. STEEL BEAMS FOR FIRST FLOOR BEING READIED FOR CONCRETE POUR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    STEEL BEAMS FOR FIRST FLOOR BEING READIED FOR CONCRETE POUR UNDER WEATHER SHELTER DURING COLD WINTER. NOTE ABUNDANCE OF BEAMS; THE FLOOR WILL SUPPORT HEAVY LOADS. INL NEGATIVE NO. 1175. Unknown Photographer, 12/20/1950 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  1. Pouring and running a protein gel by reusing commercial cassettes.

    PubMed

    Hwang, Alexander C; Grey, Paris H; Cuddy, Katrina; Oppenheimer, David G

    2012-01-01

    The evaluation of proteins using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) analysis is a common technique used by biochemistry and molecular biology researchers. For laboratories that perform daily analyses of proteins, the cost of commercially available polyacrylamide gels (~$10/gel) can be considerable over time. To mitigate this cost, some researchers prepare their own polyacrylamide gels. Traditional methods of pouring these gels typically utilize specialized equipment and glass gel plates that can be expensive and preclude pouring many gels and storing them for future use. Furthermore, handling of glass plates during cleaning or gel pouring can result in accidental breakage creating a safety hazard, which may preclude their use in undergraduate laboratory classes. Our protocol demonstrates how to pour multiple protein gels simultaneously by recycling Invitrogen Nupage Novex minigel cassettes, and inexpensive materials purchased at a home improvement store. This economical and streamlined method includes a way to store the gels at 4°C for a few weeks. By re-using the plastic gel cassettes from commercially available gels, labs that run frequent protein gels can save significant costs and help the environment. In addition, plastic gel cassettes are extremely resistant to breakage, which makes them ideal for undergraduate laboratory classrooms. PMID:22349047

  2. Workmen and Crawler Crane pouring roof slab and parapet wall ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Workmen and Crawler Crane pouring roof slab and parapet wall of building - looking northwest. Taken Nov. 15, 1929. 14th Naval District Photo Collection Item No. 7165 - U.S. Naval Base, Pearl Harbor, Exterior Cranes, Waterfront Crane Track System, Pearl City, Honolulu County, HI

  3. Analysis of the DWPF glass pouring system using neural networks

    SciTech Connect

    Calloway, T.B. Jr.; Jantzen, C.M.; Medich, L.; Spennato, N.

    1997-08-05

    Neural networks were used to determine the sensitivity of 39 selected Melter/Melter Off Gas and Melter Feed System process parameters as related to the Defense Waste Processing Facility (DWPF) Melter Pour Spout Pressure during the overall analysis and resolution of the DWPF glass production and pouring issues. Two different commercial neural network software packages were used for this analysis. Models were developed and used to determine the critical parameters which accurately describe the DWPF Pour Spout Pressure. The model created using a low-end software package has a root mean square error of {+-} 0.35 inwc (< 2% of the instrument`s measured range, R{sup 2} = 0.77) with respect to the plant data used to validate and test the model. The model created using a high-end software package has a R{sub 2} = 0.97 with respect to the plant data used to validate and test the model. The models developed for this application identified the key process parameters which contribute to the control of the DWPF Melter Pour Spout pressure during glass pouring operations. The relative contribution and ranking of the selected parameters was determined using the modeling software. Neural network computing software was determined to be a cost-effective software tool for process engineers performing troubleshooting and system performance monitoring activities. In remote high-level waste processing environments, neural network software is especially useful as a replacement for sensors which have failed and are costly to replace. The software can be used to accurately model critical remotely installed plant instrumentation. When the instrumentation fails, the software can be used to provide a soft sensor to replace the actual sensor, thereby decreasing the overall operating cost. Additionally, neural network software tools require very little training and are especially useful in mining or selecting critical variables from the vast amounts of data collected from process computers.

  4. Using double-poured alginate impressions to fabricate bleaching trays.

    PubMed

    Haywood, V B; Powe, A

    1998-01-01

    Esthetic and diagnostic treatment often requires two casts of one arch, one for baseline and one for alterations (diagnostic wax-up, bleaching tray, occlusal analysis). The purpose of this study was to compare the accuracy of stone casts generated from a second pour of a properly handled alginate impression with first-poured casts. A maxillary dentoform was indexed with six reference spaces (#8-15, 9-2, 2-15, and incisal-to-gingival of #3, 9, 14). Irreversible hydrocolloid (Jeltrate) impressions were made in perforated steel trays by a single investigator. Impression material was spatulated for 1 minute. The seated impression and dentoform were wrapped in a damp paper towel to simulate intraoral conditions, and allowed to set for 2 minutes. Upon separation, the impression was stored in a damp towel for 5 minutes. The impression was poured in cast stone (Microstone) according to the manufacturer's instructions. The stone-filled impression was immediately rewrapped in a damp paper towel and allowed to set for 45 minutes at room temperature. Upon removal of the stone, the impression was rinsed with cold water, shaken dry, and repoured in the same manner. Ten impressions were made: the first five impressions were poured to make casts for Group A, then repoured as described above for casts for Group B. The remaining five impressions were poured once to make casts for Group C. The six spaces of each cast were measured three times in random order using a dial caliper and the space average calculated for the cast. At each space, analysis of variance showed no significant difference among Groups A, B, or C (P < 0.05). When alginate impressions that have been poured with cast stone are kept moist during stone setting and repoured within 45 minutes, two casts can be generated from one impression with the same degree of accuracy as two casts made from taking two separate impressions, providing the alginate does not tear during first cast removal. PMID:9656923

  5. Viscous pour point of microquantities of fluid lubricants

    NASA Technical Reports Server (NTRS)

    Gardos, M. N.

    1974-01-01

    A method is described involving the measurement of the viscous desolidification (pour) point of wax-free lubricant fluids. This method is especially useful for pour point testing of experimental quantities, since only six to sixteen drops of the oil are required for a single determination (automatically performed in duplicate) with nearly full recovery of the sample. The technique consists of: (1) rapidly freezing a small, predetermined amount of the oil on the side of a small test tube to form a frozen drop of given dimensions; (2) immersing duplicates of the charged and stoppered tubes into a cold bath; and (3) measuring the temperature when the drop front has moved a predetermined distance as the bath warms up.

  6. CONCRETE POURS HAVE PRODUCED A REINFORCED SUPPORT BASE FOR MTR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CONCRETE POURS HAVE PRODUCED A REINFORCED SUPPORT BASE FOR MTR REACTOR. PIPE TUNNEL IS UNDER CONSTRUCTION AT CENTER OF VIEW. PIPES WILL CARRY RADIOACTIVE WATER FROM REACTOR TO WATER PROCESS BUILDING. CAMERA LOOKS SOUTH INTO TUNNEL ALONG WEST SIDE OF REACTOR BASE. TWO CAISSONS ARE AT LEFT SIDE OF VIEW. NOTE "WINDOW" IN SOUTH FACE OF REACTOR BASE AND ALSO GROUP OF PENETRATIONS TO ITS LEFT. INL NEGATIVE NO. 733. Unknown Photographer, 10/6/1950 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  7. Propagation of convective combustion in poured-density explosives

    SciTech Connect

    Foteenkov, V.A.; Ermolaev, B.S.; Korotkov, A.I.; Sulimov, A.A.

    1982-09-01

    This paper is concerned with analyzing nonstationary stabilized convective combustion, which has not been previously systematically studied. The substance studied (DRP-3 gunpowder or TNT) was poured into a strong metallic casing. The main results of the experiments for a semiclosed volume with coil ignition from the open end concludes that the velocity of convective combustion with rapidly increasing pressure in the flame front can be stabilized only as a result of effective packing of the explosive charge in front of the flame front, when the pressure in the wave approaches the yield stress of the explosive (of the order of 1 kbar).

  8. Conception d'un circuit d'etouffement pour photodiodes a avalanche en mode geiger pour integration heterogene 3d

    NASA Astrophysics Data System (ADS)

    Boisvert, Alexandre

    Le Groupe de Recherche en Appareillage Medical de Sherbrooke (GRAMS) travaille actuellement sur un programme de recherche portant sur des photodiodes a avalanche mono-photoniques (PAMP) operees en mode Geiger en vue d'une application a la tomographie d'emission par positrons (TEP). Pour operer dans ce mode; la PAMP, ou SPAD selon l'acronyme anglais (Single Photon Avalanche Diode), requiert un circuit d'etouffement (CE) pour, d'une part, arreter l'avalanche pouvant causer sa destruction et, d'autre part. la reinitialiser en mode d'attente d'un nouveau photon. Le role de ce CE comprend egalement une electronique de communication vers les etages de traitement avance de signaux. La performance temporelle optimale du CE est realisee lorsqu'il est juxtapose a la PAMP. Cependant, cela entraine une reduction de la surface photosensible ; un element crucial en imagerie. L'integration 3D, a base d'interconnexions verticales, offre une solution elegante et performante a cette problematique par l'empilement de circuits integres possedant differentes fonctions (PAMP, CE et traitement avance de signaux). Dans l'approche proposee, des circuits d'etouffement de 50 pm x 50 pm realises sur une technologie CMOS 130 mn 3D Tezzaron, contenant chacun 112 transistors, sont matrices afin de correspondre a une matrice de PAMP localisee sur une couche electronique superieure. Chaque circuit d'etouffement possede une gigue temporelle de 7,47 ps RMS selon des simulations faites avec le logiciel Cadence. Le CE a la flexibilite d'ajuster les temps d'etouffement et de recharge pour la PAMP tout en presentant une faible consommation de puissance (~ 0,33 mW a 33 Mcps). La conception du PAMP necessite de supporter des tensions superieures aux 3,3 V de la technologie. Pour repondre a ce probleme, des transistors a drain etendu (DEMOS) ont ete realises. En raison de retards de production par Ies fabricants, les circuits n'ont pu etre testes physiquement par des mesures. Les resultats de ce memoire

  9. VIEW OF THE #67 HOLDING FURNACE POURING AT #04 COPPER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF THE #67 HOLDING FURNACE POURING AT #04 COPPER STATION IN THE CASTING SHOP. (OTHER UNITS MELT BRASS ALLOYS.) THIS IS THE SOUTHERNMOST FURNACE OF THE FOUR PRESENTLY IN SITU. THE CURRENT CASTING SHOP WAS CONSTRUCTED DURING THE EARLY 1970'S, REPLACING THE ORIGINAL PRE-WWI FACILITY. STATIONS #02, 03, AND 04 EACH CONSIST OF A HOLDER FLANKED BY A PAIR OF 800 KW ELECTRIC MELTERS. THE HOLDER IS REHEATED AT 85,000 LBS. SHAKER BOX, LOCATED AT THE REAR OF EACH MELTER SUPPLY THE MIXTURE OF INGREDIENTS REQUIRED FOR EACH PARTICULAR ALLOY. ONE MEMBER OF THE THREE-MAN CASTING TEAMS IS RESPONSIBLE FOR SHAKING METAL INTO THE MELTERS. IN THE LOWER RIGHT ARE SHOWN THE MOLD STORAGE AREA AND THE FURNACE BUILDERS' AREA FOR CHIPPING AND REBRICKING OFF-LINE UNITS. - American Brass Foundry, 70 Sayre Street, Buffalo, Erie County, NY

  10. VIEW OF THE #67 HOLDING FURNACE POURING AT #04 COPPER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF THE #67 HOLDING FURNACE POURING AT #04 COPPER STATION IN THE CASTING SHOP. (OTHER UNITS MELT BRASS ALLOYS.) THIS IS THE SOUTHERNMOST FURNACE OF THE FOUR PRESENTLY IN SITU. THE CURRENT CASTING SHOP WAS CONSTRUCTED DURING THE EARLY 1970'S, REPLACING THE ORIGINAL PRE-WWI FACILITY. STATIONS #02,03, AND 04 EACH CONSIST OF A HOLDER FLANKED BY A PAIR OF 800 KW ELECTRIC MELTERS. THE HOLDER IS RATED AT 85,000 LBS. SHAKER BOXES, LOCATED AT THE REAR OF EACH MELTER SUPPLY THE MIXTURE OF INGREDIENTS REQUIRED FOR EACH PARTICULAR ALLOY. ONE MEMBER OF THE THREE-MAN CASTING TEAMS IS RESPONSIBLE FOR SHAKING METAL INTO THE MELTERS. IN THE LOWER RIGHT ARE SHOWN THE MOLD STORAGE AREA AND THE FURNACE BUILDERS' AREA FOR CHIPPING AND REBRICKING OFF-LINE UNITS. - American Brass Foundry, 70 Sayre Street, Buffalo, Erie County, NY

  11. Plutonium Immobilization Project - Cold Pour Phase 2 Test Results

    SciTech Connect

    Hamilton, L.

    2001-02-15

    The U.S. Department of Energy will immobilize excess plutonium in the proposed Plutonium Immobilization Plant (PIP) at the Savannah River site (SRS) as part of a two-track approach for dispositioning weapons-usable plutonium. The Department of Energy is funding the development and testing effort for the PIP being conducted by Lawrence Livermore National Laboratory and Argonne National Laboratory. PIP is developing the ''Can-in Canister'' (CIC) technology that immobilizes plutonium by encapsulating it in ceramic forms (or pucks) and ultimately surrounding the forms with high-level waste glass to provide a deterrent to recovery. A cold (non-radioactive) test program was conducted to develop and verify the baseline design for the canister and internal hardware. Tests were conducted in two phases. Phase 1 Cold Pour Tests, conducted in 1999, were scoping tests. This paper describes the Phase 2 tests conducted in 2000 that verified the adequacy of the baseline and demonstrated compliance with repository requirements.

  12. Plutonium Immobilization Project - Cold Pour Phase 2 Test Results

    SciTech Connect

    Hamilton, L.

    2001-01-10

    The Plutonium Immobilization Project (PIP) is a program funded by the U.S. Department of Energy to develop technology for dispositioning excess weapons grade plutonium. This program introduces the ''Can-in-Canister'' (CIC) technology that immobilizes the plutonium by encapsulating it in ceramic forms (or pucks) and ultimately surrounding it with high-level waste glass to provide a deterrent to recovery. A cold (non-radioactive) test program was conducted to develop and verify the baseline design for the canister and internal hardware. Tests were conducted in two phases. Phase 1 Cold Pour Tests, conducted in 1999, were scoping tests. This paper describes the Phase 2 tests conducted in 2000 which verified the adequacy of the baseline CIC design and assured that the system would meet repository quality assurance requirements.

  13. Plutonium Immobilization Project - Cold Pour Phase 2 Test Results

    SciTech Connect

    Hamilton, L.

    2001-01-05

    The Plutonium Immobilization Project (PIP) is a program funded by the U.S. Department of Energy to develop technology for dispositioning excess weapons grade plutonium. This program introduces the ''Can-in-Canister'' (CIC) technology that immobilizes the plutonium by encapsulating it in ceramic forms (or pucks) and ultimately surrounding it with high-level waste glass to provide a deterrent to recovery. A cold (non-radioactive) test program was conducted to develop and verify the baseline design for the canister and internal hardware. Tests were conducted in two phases. Phase 1 Cold Pour Tests, conducted in 1999, were scoping tests. This paper describes the Phase 2 tests conducted in 2000 which verified the adequacy of the baseline CIC design and assured that the system would meet repository quality assurance requirements.

  14. Soft drink "pouring rights": marketing empty calories to children.

    PubMed

    Nestle, M

    2000-01-01

    Healthy People 2010 objectives call for meals and snacks served in schools to contribute to overall diets that meet federal dietary guidelines. Sales in schools of foods and drinks high in calories and low in nutrients undermine this health objective, as well as participation in the more nutritious, federally sponsored, school lunch programs. Competitive foods also undermine nutrition information taught in the classroom. Lucrative contracts between school districts and soft drink companies for exclusive rights to sell one brand are the latest development in the increasing commercialization of school food. These contracts, intended to elicit brand loyalty among young children who have a lifetime of purchases ahead of them, are especially questionable because they place schools in the position of "pushing" soft drink consumption. "Pouring rights" contracts deserve attention from public health professionals concerned about the nutritional quality of children's diets. PMID:11059423

  15. The bottle and the glass say to me: "pour!".

    PubMed

    De Stefani, Elisa; Innocenti, Alessandro; Bernardi, Nicolò Francesco; Campione, Giovanna Cristina; Gentilucci, Maurizio

    2012-05-01

    The present study aimed at determining whether the observation of two functionally compatible artefacts, that is which potentially concur in achieving a specific function, automatically activates a motor programme of interaction between the two objects. To this purpose, an interference paradigm was used during which an artefact (a bottle filled with orange juice), target of a reaching-grasping and lifting sequence, was presented alone or with a non-target object (distractor) of the same or different semantic category and functionally compatible or not. In experiment 1, the bottle was presented alone or with an artefact (a sphere), or a natural (an apple) distractor. In experiment 2, the bottle was presented with either the apple or a glass (an artefact) filled with orange juice, whereas in experiment 3, either an empty or a filled glass was presented. In the control experiment 4, we compared the kinematics of reaching-grasping and pouring with those of reaching-grasping and lifting. The kinematics of reach, grasp and lift was affected by distractor presentation. However, no difference was observed between two distractors that belonged to different semantic categories. In contrast, the presence of the empty rather filled glass affected the kinematics of the actual grasp. This suggests that an actually functional compatibility between target (the bottle) and distractor (the empty glass) was necessary to activate automatically a programme of interaction (i.e. pouring) between the two artefacts. This programme affected the programme actually executed (i.e. lifting). The results of the present study indicate that, in addition to affordances related to intrinsic object properties, "working affordances" related to a specific use of an artefact with another object can be activated on the basis of functional compatibility. PMID:22411580

  16. Dimensional Accuracy of Stone Casts Obtained with Multiple Pours into the Same Mold

    PubMed Central

    Valente, Valdimar da Silva; Zanetti, Artêmio Luiz; Feltrin, Pedro Paulo; Inoue, Ricardo Tatsuo; de Moura, Carmem Dolores Vilarinho Soares; Pádua, Luiz Evaldo de Moura

    2012-01-01

    Aim. The aim of the present study was to compare the dimensional accuracy of stone casts obtained with vinyl polysiloxane molds through the double-impression technique with three pours into the same mold. Methods. A stainless steel master model was constructed simulating a three-unit fixed prosthesis. Twelve impressions were taken of this master model with addition silicone, using the double-impression technique. Three pours of type IV gypsum were then made into each mold, thus producing 36 casts. The pours were made 1 hour, 6 hours and 24 hours after the impression procedure. Next, intra- and interabutment measurements were made in a coordinate measuring machine. Results. Comparative analysis of the dimensional accuracy of stone casts resulting from multiple pours was not statistically significant in pours first and second (P > 0.05). These values, however, were statistically significant at third pour in the height in abutment 1 and upper distance interabutment. Conclusion. The wait time (1 hour, and 6 hours) observed before pouring the stone into the same molds did not cause significant dimensional accuracy of the casts. PMID:23320186

  17. Fabrication de transistors monoelectroniques pour la detection de charge

    NASA Astrophysics Data System (ADS)

    Richard, Jean-Philippe

    Le transistor monoelectro'nique (SET) est un candidat que l'on croyait avoir la capacite de remplacer le transistor des circuits integres actuel (MOSFET). Pour des raisons de faible gain en voltage, d'impedance de sortie elevee et de sensibilite aux fluctuations de charges, il est considere aujourd'hui qu'un hybride tirant profit des deux technologies est plus avantageux. En exploitant sa lacune d'etre sensible aux variations de charge, le SET est davantage utilise dans des applications ou la detection de charge s'avere indispensable, notamment dans les domaines de la bio-detection et de l'informatique quantique. Ce memoire presente une etude du transistor monoelectronique utilise en tant que detecteur de charge. La methode de fabrication est basee sur le procede nanodamascene developpe par Dubuc et al. [11] permettant au transistor monoelectronique de fonctionner a temperature ambiante. La temperature d'operation etant intimement liee a la geometrie du SET, la cle du procede nanodamascene reside dans le polissage chimico-mecanique (CMP) permettant de reduire l'epaisseur des SET jusqu'a des valeurs de quelques nanametres. Dans ce projet de maitrise, nous avons cependant opte pour que le SET soit opere a temperature cryogenique. Une faible temperature d'operation permet le relachement des contraintes de dimensions des dispositifs. En considerant les variations de procedes normales pouvant survenir lors de la fabrication, la temperature d'operation maximale calculee en conception s'etend de 27 K a 90 K, soit une energie de charge de 78 meV a 23 meV. Le gain du detecteur de charge etant dependant de la distance de couplage, les resultats de simulations demontrent que cette distance doit etre de 200 nm pour que la detection de charge soit optimale. Les designs concus sont ensuite fabriques sur substrat d'oxyde de silicium. Les resultats de fabrication de SET temoignent de la robustesse du procede nanodamascene. En effet, les dimensions atteintes experimentalement s

  18. Heat transfer modelling of the saltstone pouring and curing process. Task Number: 93-016-0

    SciTech Connect

    Shadday, M.A. Jr.

    1993-11-01

    A byproduct of the in tank precipitation, ITP, process will be 25 million gallons of low-level salt solution. This salt solution will be mixed with cement and a flyash/slag mixture and solidified in surface vaults in the Z-area Saltstone Facility. The curing process of saltstone involves exothermic reactions, and there is a maximum temperature limit of 90{degree}C for the curing saltstone. If this temperature limit is exceeded, the physical properties of the saltstone can be degraded. A heat transfer model of the saltstone pouring and curing process has been developed that predicts transient temperature distributions in the curing saltstone. The purpose of this model is to predict peak temperatures as functions of the several independent variables in this process: pour temperature, the pour schedule, and seasonal variations in the ambient temperature. The peak temperature of the saltstone is very sensitive to the internal heat generation that accompanies the curing process. Most of the energy is released over a short period of several hours, and the balance is released slowly over a period of time that can be in excess of a month. This long term low level internal heat generation is difficult to measure in laboratory calorimetry tests, and it can significantly influence the peak temperature in the saltstone. Due to the low thermal conductivity of the saltstone, the central region of the poured saltstone will essentially heat up adiabatically. The time dependence of the internal heat generation rate was determined from an analysis of the 1991 pilot pour test. With a pour schedule of eight hours a day and five days a week in the summer, the model predicts that the saltstone will have a peak temperature of 98 C with a pour temperature of 45 C, and a peak temperature of 88 C with a pour temperature of 30 C. With a pour schedule of three days a week, the peak temperature will be 88{degree}C with a pour temperature of 45 C, and 80 C with a pour temperature of 30 C.

  19. Ressources pour les personnes atteintes de démence

    PubMed Central

    Frank, Christopher; Feldman, Sid; Schulz, Mary

    2011-01-01

    Résumé Objectif Résumer les services offerts par la Société Alzheimer et discuter des autres sources de soutien et d’information à la disposition des personnes atteintes de démence. Sources de l’information On a fait une recension dans Ovid MEDLINE à l’aide des expressions dementia, Alzheimer disease, community health services utilization et caregiver stress. Message principal Il a été démontré qu’il est bénéfique aux patients et aux aidants si le diagnostic de la démence est posé tôt dans la maladie. Une consultation auprès de la Société Alzheimer peut aider dans la prise en charge non pharmacologique de la démence au moment du diagnostic et en tout temps durant l’évolution de la maladie. Parmi les services offerts, on peut mentionner des renseignements au sujet de la démence, le soutien aux aidants, la coordination des services communautaires et une grande diversité de ressources écrites à l’intention des patients et des aidants. Là où il est offert, le programme Premier lien peut aider avec l’orientation vers des services en minimisant la nécessité pour les patients ou les aidants de communiquer eux-mêmes avec les filiales locales de la Société. On discute aussi d’autres ressources, y compris les soins de répit et les approches technologiques pour prendre en charge l’errance. Conclusion La Société Alzheimer joue un rôle important dans la prise en charge de la démence et les médecins de famille devraient toujours envisager d’y référer leurs patients au moment du diagnostic, quelle que soit la gravité de l’état. Premier lien, quand il est accessible, peut faciliter le contact avec les services. Des ressources comme les soins de répit et les programmes de jour devraient toujours être considérés lorsqu’ils sont disponibles.

  20. Solution saline hypertonique pour la bronchiolite chez les bébés

    PubMed Central

    Grewal, Simran; Goldman, Ran D.

    2015-01-01

    Résumé Question J’ai récemment reçu le rapport du congé de l’hôpital d’un patient de 1 an admis pour une bronchiolite. On y indiquait qu’il avait été traité, entre autres, avec une solution saline hypertonique inhalée. Cette thérapie est-elle recommandée pour les enfants en milieu de soins aigus? Réponse La bronchiolite, causée principalement par le virus respiratoire syncytial, est très commune en hiver. C’est la cause la plus fréquente d’hospitalisation durant l’enfance. Plusieurs bonnes études ont été effectuées au cours de la dernière décennie sur l’utilisation d’une solution saline hypertonique nébulisée pour la prise en charge de la bronchiolite; toutefois, leurs résultats sont conflictuels. Quoiqu’il puisse y avoir un rôle pour la solution saline hypertonique nébulisée chez les enfants hospitalisés pour une bronchiolite pendant plus de 3 jours, ce traitement dans d’autres milieux ne confère pas suffisamment de bienfaits pour recommander son utilisation.

  1. Refinement of primary Si grains in Al-20%Si alloy slurry through serpentine channel pouring process

    NASA Astrophysics Data System (ADS)

    Zheng, Zhi-kai; Mao, Wei-min; Liu, Zhi-yong; Wang, Dong; Yue, Rui

    2016-05-01

    In this study, a serpentine channel pouring process was used to prepare the semi-solid Al-20%Si alloy slurry and refine primary Si grains in the alloy. The effects of the pouring temperature, number of curves in the serpentine channel, and material of the serpentine channel on the size of primary Si grains in the semi-solid Al-20%Si alloy slurry were investigated. The results showed that the pouring temperature, number of the curves, and material of the channel strongly affected the size and distribution of the primary Si grains. The pouring temperature exerted the strongest effect, followed by the number of the curves and then the material of the channel. Under experimental conditions of a four-curve copper channel and a pouring temperature of 701°C, primary Si grains in the semi-solid Al-20%Si alloy slurry were refined to the greatest extent, and the lath-like grains were changed into granular grains. Moreover, the equivalent grain diameter and the average shape coefficient of primary Si grains in the satisfactory semi-solid Al-20%Si alloy slurry were 24.4 μm and 0.89, respectively. Finally, the refinement mechanism and distribution rule of primary Si grains in the slurry prepared through the serpentine channel pouring process were analyzed and discussed.

  2. Device for controlling the pouring of molten materials

    DOEpatents

    Moore, Alan F.; Duncan, Alfred L.

    1994-01-01

    A device for controlling the pouring of a molten material from a crucible or other container. The device (10) includes an annular retainer ring (12) for mounting in the drain opening in the bottom of a conventional crucible (16), the retainer ring defining a opening (14) therethrough. The device (10) also includes a plug member (22) having an annular forward end portion (24) for force-fit reception in the opening (14) of the retainer ring (12) to selectively seal the opening (14) and for being selectively forced through the opening (14). The plug member (22) has a rear end portion (26) for being positioned within the crucible (16), the rear end portion (26) including stop means for prohibiting the rear end portion from passing through the opening (14) in the retainer ring (12) when the forward end portion (24) is selectively forced through the opening. The plug member (22) defines at least one, and preferably a plurality of flutes (32), each extending from a point rearward the annular forward end portion (24) of the plug member (22), and forward the stop means, to a point rearward of the stop means. The flutes (32) permit fluid communication between the interior and exterior of the crucible (16) when the forward end portion (24) of the plug member (22) is forced through the opening (14) in the retaining ring (12) such that the molten material is allowed to flow from the crucible (16).

  3. Device for controlling the pouring of molten materials

    DOEpatents

    Moore, A.F.; Duncan, A.L.

    1994-02-15

    A device is described for controlling the pouring of a molten material from a crucible or other container. The device includes an annular retainer ring for mounting in the drain opening in the bottom of a conventional crucible, the retainer ring defining a opening there through. The device also includes a plug member having an annular forward end portion for force-fit reception in the opening of the retainer ring to selectively seal the opening and for being selectively forced through the opening. The plug member has a rear end portion for being positioned within the crucible, the rear end portion including stop means for prohibiting the rear end portion from passing through the opening in the retainer ring when the forward end portion is selectively forced through the opening. The plug member defines at least one, and preferably a plurality of flutes, each extending from a point rearward the annular forward end portion of the plug member, and forward the stop means, to a point rearward of the stop means. The flutes permit fluid communication between the interior and exterior of the crucible when the forward end portion of the plug member is forced through the opening in the retaining ring such that the molten material is allowed to flow from the crucible. 5 figures.

  4. Chimpanzees (Pan troglodytes) accurately compare poured liquid quantities.

    PubMed

    Beran, Michael J

    2010-07-01

    Although many studies have shown that nonhuman animals can choose the larger of two discrete quantities of items, less emphasis has been given to discrimination of continuous quantity. These studies are necessary to discern the similarities and differences in discrimination performance as a function of the type of quantities that are compared. Chimpanzees made judgments between continuous quantities (liquids) in a series of three experiments. In the first experiment, chimpanzees first chose between two clear containers holding differing amounts of juice. Next, they watched as two liquid quantities were dispensed from opaque syringes held above opaque containers. In the second experiment, one liquid amount was presented by pouring it into an opaque container from an opaque syringe, whereas the other quantity was visible the entire time in a clear container. In the third experiment, the heights at which the opaque syringes were held above opaque containers differed for each set, so that sometimes sets with smaller amounts of juice were dropped from a greater height, providing a possible visual illusion as to the total amount. Chimpanzees succeeded in all tasks and showed many similarities in their continuous quantity estimation to how they performed previously in similar tasks with discrete quantities (for example, performance was constrained by the ratio between sets). Chimpanzees could compare visible sets to nonvisible sets, and they were not distracted by perceptual illusions created through various presentation styles that were not relevant to the actual amount of juice dispensed. This performance demonstrated a similarity in the quantitative discrimination skills of chimpanzees for continuous quantities that matches that previously shown for discrete quantities. PMID:20146077

  5. Dispositifs semi-conducteurs pour biodetection photonique et imagerie hyperspectrale

    NASA Astrophysics Data System (ADS)

    Lepage, Dominic

    La creation d'un microsysteme d'analyse biochimique, capable de livrer des diagnostics preliminaires sur la quantification d'elements pathogenes, est un defi multidisciplinaire ayant un impact potentiel important sur la majorite des activites humaines en sante et securite. En effet, un dispositif integre, peu dispendieux et livrant des resultats facilement interpretables, permettrait une vulgarisation des capacites de biodetection a travers differents domaines d'applications societaires et industriels. Le present document se concentre sur l'integration monolithique d'une methode de biocaracterisation dans le but de generer un transducteur miniaturise et efficace, element central d'un microsysteme de detection. Le projet de recherche ici presente vise l'etude de l'applicabilite d'un capteur plasmonique integre par l'entremise de nanostructures semi-conductrices aux proprietes quantiques et luminescentes. L'approche presentee est globale; c'est-a-dire qu'on vise a repondre aux questions fondamentales impliquant la comprehension des phenomenes photoniques, le developpement et la fabrication des dispositifs, les methodes de caracterisations possibles ainsi que l'application d'un transducteur SPR integre a la biodetection. En d'autres termes : dans quelles circonstances et comment un transducteur plasmonique integre doit-il etre realise pour l'application a la detection delocalisee d'elements pathogenes? Dans le but d'engendrer un instrument simple a l'echelle de l'usager, l'integration de la connaissance a l'echelle du design est donc effectuee. Ainsi, des capteurs plasmoniques monolithiques sont concus a l'aide de modeles theoriques ici presentes. Un instrument de mesure hyperspectrale conjuguee permettant de cartographier directement la relation de dispersion des plasmons diffractes a ete construit et teste. Cet instrument est employe a la cartographie d'elements de diffusion. Finalement, une demonstration du fonctionnement du dispositif, appliquee a la

  6. The effects of cypermethrin pour-on and piperonyl butoxide on Triatoma infestans under laboratory conditions.

    PubMed

    Amelotti, Ivana; Catalá, Silvia S; Gorla, David E

    2010-11-01

    The effect of exposing Triatoma infestans to chickens treated with cypermethrin pour-on combined with piperonyl butoxide (PBO) was studied. Four groups of treated chickens and one control group were used. Each treatment received 1 or 2 ml of the cypermethrin formulation with and without PBO. Independent groups of nymphs were fed 1, 7, 15, 30, and 45 d after the treatment application. Blood intake was estimated after each feeding occasion. Up to 15 d after the pour-on application, high mortality was observed in all nymphs fed on treated chickens (> 93% +/- 12), and lower than the nymphs of the control group (< 33% +/- 15). After 30 d of the pour-on application, there was significantly different mortality between the treatment with 1 ml (80% +/- 9) and 2 ml (> 96% +/- 5); no difference was observed between groups with or without PBO addition. After 45 d of the pour-on application, the treatments did not show significant differences (77% +/- 7), although all treatments showed higher mortality than the control group (10% +/- 9). Up to 45 d after the pour-on application, blood intake by nymphs exposed to treated chickens (0.85 +/- 0.96 mg/nymph) was lower than blood intake by nymphs exposed to control chickens (6.7 +/- 5 mg/nymph). This study shows that cypermethrin pour-on produces high mortality and reduces the blood intake of third-instar nymphs of T. infestans up to 45 d after the insecticide application to chickens. PBO did not produce a detectable effect. PMID:21175064

  7. Is the Glass Half Full or Half Empty? How to Reverse the Effect of Glass Elongation on the Volume Poured

    PubMed Central

    Caljouw, Simone R.; van Wijck, Ruud

    2014-01-01

    To reduce the volume of drinks and the risk of overconsumption, health professionals recommend the use of tall skinny instead of short wide glasses. Yet the results of the present study contradict this health advice. Participants who generously filled up a glass with lemonade served 9% more in tall narrow compared with short wide glasses (p<0.05). In addition, when pouring a small amount (i.e., a shot), participants poured 3% more in a short wide than in a tall narrow glass (p<0.05). Elongation may bias the perceived volume that is poured but also the perceived volume of the free space in the glass. We hypothesised that shifting attention from the bottom to the brim of the glass when filling it close to capacity might reverse the glass elongation effect on the quantity poured. This hypothesis was tested, by investigating two pouring tasks that differed in the required focus of attention. When the instruction was to match a reference volume, participants poured more liquid in the short wide compared with the tall narrow glass (p<0.05). The effect of glass elongation on poured volume was the opposite when the instruction was to leave space in the glasses for the reference volume. It seems likely that task and individual factors affect the pourer's viewing strategy and thus may determine the direction of the glass elongation effect on the volume poured. PMID:25343252

  8. Is the glass half full or half empty? How to reverse the effect of glass elongation on the volume poured.

    PubMed

    Caljouw, Simone R; van Wijck, Ruud

    2014-01-01

    To reduce the volume of drinks and the risk of overconsumption, health professionals recommend the use of tall skinny instead of short wide glasses. Yet the results of the present study contradict this health advice. Participants who generously filled up a glass with lemonade served 9% more in tall narrow compared with short wide glasses (p<0.05). In addition, when pouring a small amount (i.e., a shot), participants poured 3% more in a short wide than in a tall narrow glass (p<0.05). Elongation may bias the perceived volume that is poured but also the perceived volume of the free space in the glass. We hypothesised that shifting attention from the bottom to the brim of the glass when filling it close to capacity might reverse the glass elongation effect on the quantity poured. This hypothesis was tested, by investigating two pouring tasks that differed in the required focus of attention. When the instruction was to match a reference volume, participants poured more liquid in the short wide compared with the tall narrow glass (p<0.05). The effect of glass elongation on poured volume was the opposite when the instruction was to leave space in the glasses for the reference volume. It seems likely that task and individual factors affect the pourer's viewing strategy and thus may determine the direction of the glass elongation effect on the volume poured. PMID:25343252

  9. Analysis Of The Sludge Batch 7b (Macrobatch 9) DWPF Pour Stream Glass Sample

    SciTech Connect

    Johnson, F. C.; Crawford, C. L.; Pareizs, J. M.

    2013-11-18

    The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 7b (SB7b), also referred to as Macrobatch 9 (MB9), in January 2012. SB7b is a blend of the heel of Tank 40 from Sludge Batch 7a (SB7a) and the SB7b material that was transferred to Tank 40 from Tank 51. SB7b was processed using Frit 418. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program (GPCP), which is governed by the DWPF Waste Form Compliance Plan, and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. Two pour stream glass samples were collected while processing SB7b. The samples were transferred to the Savannah River National Laboratory (SRNL) where one was analyzed and the other was archived. The following conclusions were drawn from the analytical results provided in this report: The sum of oxides for the official SB7b pour stream glass is within the Product Composition Control System (PCCS) limits (95-105 wt%); The average calculated Waste Dilution Factor (WDF) for SB7b is 2.3. In general, the measured radionuclide content of the official SB7b pour stream glass is in good agreement with the calculated values from the Tank 40 dried sludge results from the SB7b Waste Acceptance Program Specification (WAPS) sample; As in previous pour stream samples, ruthenium and rhodium inclusions were detected by Scanning Electron Microscopy-Electron Dispersive Spectroscopy (SEM-EDS) in the SB7b pour stream sample; The Product Consistency Test (PCT) results indicate that the official SB7b pour stream glass meets the waste acceptance criteria for durability with a normalized boron release of 0.8 g/L, which is an order of magnitude less than the Environmental Assessment (EA) glass; The measured density of the SB7b pour stream glass was 2.70 g/cm{sup 3}; The Fe{sup 2+}/ΣFe ratio of the SB7b pour stream samples was 0.07.

  10. ANALYSIS OF DWPF SLUDGE BATCH 7A (MACROBATCH 8) POUR STREAM SAMPLES

    SciTech Connect

    Johnson, F.

    2012-05-01

    The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 7a (SB7a), also referred to as Macrobatch 8 (MB8), in June 2011. SB7a is a blend of the heel of Tank 40 from Sludge Batch 6 (SB6) and the SB7a material that was transferred to Tank 40 from Tank 51. SB7a was processed using Frit 418. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program (GPCP), which is governed by the DWPF Waste Compliance Plan, and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. Three pour stream glass samples and two Melter Feed Tank (MFT) slurry samples were collected while processing SB7a. These additional samples were taken during SB7a to understand the impact of antifoam and the melter bubblers on glass redox chemistry. The samples were transferred to the Savannah River National Laboratory (SRNL) where they were analyzed. The following conclusions were drawn from the analytical results provided in this report: (1) The sum of oxides for the official SB7a pour stream glass is within the Product Composition Control System (PCCS) limits (95-105 wt%). (2) The average calculated Waste Dilution Factor (WDF) for SB7a is 2.3. In general, the measured radionuclide content of the official SB7a pour stream glass is in good agreement with the calculated values from the Tank 40 dried sludge results from the SB7a Waste Acceptance Program Specification (WAPS) sample. (3) As in previous pour stream samples, ruthenium and rhodium inclusions were detected by Scanning Electron Microscopy-Electron Dispersive Spectroscopy (SEM-EDS) in the official SB7a pour stream sample. (4) The Product Consistency Test (PCT) results indicate that the official SB7a pour stream glass meets the waste acceptance criteria for durability with a normalized boron release of 0.64 g/L, which is an order of magnitude less than the Environmental

  11. Quantitative Microbial Risk Assessment Tutorial: Pour Point Analysis of Land-applied Microbial Loadings and Comparison of Simulated and Gaging Station Results

    EPA Science Inventory

    This tutorial demonstrates a pour point analysis • Initiates execution of the SDMPB.• Navigates the SDMPB.• Chooses a pour point within a watershed, delineates the sub-area that contributes to that pour point, and collects data for it.• Considers land applicat...

  12. EVALUATION OF THE IMPACT OF THIN POURS ON SALTSTONE PROPERTIES

    SciTech Connect

    Cozzi, A.; Langton, C.; Fox, K.

    2012-10-02

    The proposed Saltstone Disposal Unit 6 (SDU6) is a larger structure than the SDU4 cells and larger than the disposal units (SDU2, SDU3, and SDU5) currently in use or under construction. The additional capacity provided by SDU6 is desired to reduce life cycle costs and support site accelerated closure goals. The larger size of the planned SDU6 could result in saltstone being placed in thinner lifts as the unit is filled. This study was performed to determine whether thinner layers of saltstone negatively impact the performance of the waste form. A larger number of cold joints could potentially result in increased drying, salt deposition, and surface oxidation. A matrix of samples was prepared to simulate thin pours ranging from 0.5 to 6 inches thick. Each sample was cured for at least 28 days prior to further characterization. Leachability results showed that there is no obvious impact of the number of grout layers on the Leachability Index values for Na and NO{sub 3}. The concentrations of Cr, NO{sub 2}, and C{sub 2}O{sub 4} were below detection limits for all of the leachates. No attempt was made to evaluate the oxidation of these samples since no measureable Cr was leached, although this would appear to indicate that Cr in the samples remained reduced for cold joints with surfaces exposed for approximately four days. The results of hydraulic conductivity measurements showed that the number of cold joints in the samples did not have a significant impact on the measured values for the vertical lift orientation (i.e., when the flow path is perpendicular to the cold joints). For the horizontal lift orientation (i.e., when the flow path is parallel to the cold joints), the number of cold joints in the samples also did not appear to have a significant impact on hydraulic conductivity. The measured hydraulic conductivity was faster when the flow path was parallel to the cold joints as compared to when the flow path was perpendicular to the cold joints. Percolation

  13. Computer Modeling of a Glass Stream Departing from a Pour Spout Knife Edge

    SciTech Connect

    Guerrero, H.N.

    1998-12-17

    The subject of this paper is the hydrodynamics of pouring molten glass. This involves a class of free surface flows that changes shape from flat film flow on a wall to a round cylindrical jet in the free fall region, which as not previously received much attention.

  14. Numerical simulation of multi-mini-pot pouring process of a 13-ton steel ingot

    NASA Astrophysics Data System (ADS)

    Li, Jun; Ge, Honghao; Wang, Bin; Wu, Menghuai; Li, Jianguo

    2015-06-01

    Heavy ingots up to several hundred tons for power plant forgings exhibit large scale grain size and morphology differences, which are harmful to the design of forging parameters, and severe macrosegregation, which could not be eliminated during the subsequent forging and heat treatment processing. To cast these ingots with more homogeneity, a multi-mini-pot (MMP) poring technique is proposed, in which liquid metal is poured by multi-mini-pot (MMP) with intermission between each pot and solidification occurs step by step. In this paper, we are focus on the prediction of macrosegregation in MMP pouring process. A three-phase model is employed to study the MMP pouring process for a 13-ton heavy ingot. The main features of this three-phases model in such a heavy ingot can be quantitatively modelled: growth of columnar dendrite trunks; nucleation, growth and sedimentation of equiaxed crystals; thermosolutal convection of the melt; solute transport by both convection and crystal sedimentation; and the columnar-to-equiaxed transition (CET). The results shown that the MMP pouring technique tend to decrease the macrosegregation significantly by compared with the conventional method.

  15. Topical (pour-on) ivermectin in the treatment of canine scabies.

    PubMed

    Paradis, M; de Jaham, C; Pagé, N

    1997-06-01

    The efficacy of a pour-on formulation of ivermectin at 500 micrograms/kg body weight applied on the dorsum on days 1 and 15 was evaluated in 90 dogs from a shelter, naturally infested with Sarcoptes scabiei. This very practical form of treatment was successful in eradicating scabies from this shelter. PMID:9187806

  16. Coprological evaluation of pour-on and injectable formulation of moxidectin in beef cattle

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Two, 28 day(d) studies were conducted with naturally infected beef calves to assess the effect of allo-grooming behavior on fecal egg count (FEG)reductions and coproculture counts following treatment with pour-on or injectable moxidectin. The first study was conducted at the USDA Southern Plains Ex...

  17. Independent digit contributions to rotational manipulation in a three-digit pouring task requiring dynamic stability.

    PubMed

    Manis, Ryan P; Santos, Veronica J

    2015-07-01

    Many activities of daily living involve multi-digit, voluntary rotational manipulations of grasped objects. Yet, only a few studies have focused on coordination of individual fingertip forces during such tasks. The objective of this study was to investigate individual digit contributions to a three-digit task in which an object was rotationally manipulated against gravity. Center of mass was varied through the use of containers shaped like a water bottle, pint glass, and cocktail glass, from which subjects poured fluid carefully into a nearby receptacle. The center of mass of the grasped object changed continuously as fluid was poured out. Self-selected digit placement and contributions of fingertip forces to rotational manipulation were dependent upon anticipated center of mass location associated with container shape. The thumb resisted the rotation of the top-heavy, cocktail glass container until 79 % of the pouring phase had elapsed, but actively assisted the rotation of the less challenging containers. More directly opposing the thumb, the index finger contributed more to grasp stability. The middle finger contributed more to rotation of the container for pouring. It was found that the thumb, index, and middle fingers acted in unison temporally, but contributed independently to the grip forces and stabilizing moments throughout the dynamic, rotational manipulation task. PMID:25929550

  18. [Reconstruction of a fire homicide after pouring denatured alcohol on the victim].

    PubMed

    Bohnert, Michael; Lehmann, Rainer; Simon, Karl-Heinz; Wehner, Frank

    2009-01-01

    A 48-year-old man died from extensive burns suffered especially on the upper part of the body during a dispute with his ex-wife, who had poured spirit or a spirit-water mixture over him. For initially unknown reasons, the man's clothing caught fire. Whereas the public prosecutor assumed that the woman had intentionally poured a larger amount of spirit over her ex-husband before setting fire to him, the defendant first claimed to have poured the rest of a water-spirit mixture left over from cleaning the windows over the man and that his clothing caught fire on lighting a cigarette. To clarify the course of events, fire tests with spirit in various dilutions were conducted, which showed that even with undiluted spirit a direct contact with the flame of at least 1 second is necessary to start a fire. There is no deflagration, if spirit is used as a fire accelerant. In the trial, the defendant made a confession and admitted to have poured a mixture of 75% spirit and 25% water over her ex-husband and set fire to his right sleeve with the intention to kill him. PMID:19579492

  19. Evaluation of a Pour-Through Water Treatment Device for Use as Microbiological Purifier

    EPA Science Inventory

    The United States Environmental Protection Agency (EPA) Office of Research and Development has evaluated the performance of a Point-of-Use (POU) pour-through device designed for use in India, developing and emerging market (D&E) countries, and under emergency situations in the Un...

  20. Comparative plasma disposition, bioavailability and efficacy of ivermectin following oral and pour-on administrations in horses.

    PubMed

    Gokbulut, Cengiz; Cirak, Veli Y; Senlik, Bayram; Aksit, Dilek; Durmaz, Murat; McKellar, Quintin A

    2010-05-28

    Pour-on formulations of endectocides decrease the risk of injury for both user and animal, and are particularly convenient for animal owners who can apply the product. This study was designed to investigate the plasma disposition and efficacy of ivermectin (IVM) following pour-on, per os and intravenous administrations. Eighteen female horses weighing 510-610 kg were used in this study. The animals were allocated into three groups (per os, pour-on and intravenous groups). The equine paste, bovine pour-on and bovine injectable formulations of IVM were administered orally, topically and intravenously at the dose rates of 0.2, 0.5 and 0.2mg/kg bodyweight, respectively. Heparinized blood samples and hair samples were collected at various times between 1h and 40 days. The samples were analysed by high performance liquid chromatography with fluorescence detector. Faecal strongyle egg counts (EPG) were performed by a modified McMaster's technique before and at weekly intervals during 10 weeks after treatment. The results indicated that the plasma concentration and systemic availability of IVM was lower but the plasma persistence was prolonged after pour-on administration compared with per os route. IVM (paste) reduced the EPG by >95% for 10 weeks, whereas the reduction in pour-on group varied from 82 to 97%. EPG reduction in pour-on group was lower than that of per os group. Degradation on the application site, cutaneous biotransformation, binding of IVM to the haircoat and/or sebum are probably responsible for the relatively lower bioavailability of IVM in horses after pour-on administration. In conclusion, the poor plasma availability observed after pour-on administration could result in subtherapeutic plasma concentrations, which may promote the development of drug resistance in parasites. PMID:20181429

  1. ANALYSIS OF DWPF SLUDGE BATCH 6 (MACROBATCH 7) POUR STREAM GLASS SAMPLES

    SciTech Connect

    Johnson, F.

    2012-01-20

    The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 6 (SB6), also referred to as Macrobatch 7 (MB7), in June 2010. SB6 is a blend of the heel of Tank 40 from Sludge Batch 5 (SB5), H-Canyon Np transfers and SB6 that was transferred to Tank 40 from Tank 51.1 SB6 was processed using Frit 418. Sludge is received into the DWPF Chemical Processing Cell (CPC) and is processed through the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator Tank (SME). The treated sludge slurry is then transferred to the Melter Feed Tank (MFT) and fed to the melter. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program (GPCP) and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. The DWPF requested various analyses of radioactive glass samples obtained from the melter pour stream during processing of SB6 as well as reduction/oxidation (REDOX) analysis of MFT samples to determine the impact of Argon bubbling. Sample analysis followed the Task Technical and Quality Assurance Plan (TTQAP) and an Analytical Study Plan (ASP). Four Pour Stream (PS) glass samples and two MFT slurry samples were delivered to the Savannah River National Laboratory (SRNL) from the DWPF. Table 1-1 lists the sample information for each pour stream glass sample. SB6 PS3 (S03472) was selected as the official pour stream sample for SB6 and full analysis was requested. This report details the visual observations of the as-received SB6 PS No.3 glass sample as well as results for the chemical composition, Product Consistency Test (PCT), radionuclide content, noble metals, and glass density. REDOX results will be provided for all four pour stream samples and vitrified samples of MFT-558 and MFT-568A. Where appropriate, data from other pour stream samples will be provided.

  2. Que peut-on voir avec des neutrons? Une introduction pour des non spécialistes

    NASA Astrophysics Data System (ADS)

    Schweizer, J.

    2005-11-01

    Le neutron est une particule élémentaire qui a été découverte en 1932 par James Chadwick. Ses caractéristiques principales sont résumées dans le tableau I. Il a été utilisé pour la première fois par Clifford Shull en 1946 comme outil pour des expériences de diffusion. Cette technique s'est depuis constamment développée pour concerner tous les aspects de la matière condensée: physique, chimie, matériaux, biologie. Il s'agit d'un outil tout à fait exceptionnel car le neutron possède des propriétés uniques et particulièrement adaptées pour ces études.

  3. Effect of Storage Time of Extended-Pour and Conventional Alginate Impressions on Dimensional Accuracy of Casts

    PubMed Central

    Rohanian, Ahmad; Ommati Shabestari, Ghasem; Zeighami, Somayeh; Samadi, Mohammad Javad; Shamshiri, Ahmad Reza

    2014-01-01

    Objectives: Some manufacturers claim to have produced new irreversible hydro-colloids that are able to maintain their dimensional stability during storage. The present study evaluated the effect of storage time on dimensional stability of three alginates: Hydrogum 5, Tropicalgin and Alginoplast. Materials and Methods: In this experimental in-vitro trial, a total of 90 alginate impressions were made from a Dentoform model using Hydrogum 5, Tropicalgin and Alginoplast alginates. The impressions were stored in a sealed plastic bag without a damp paper towel for 0, 24, 48, 72 and 120 hours and then poured with type III dental stone. Cross-arch (facial of 6 to facial of 6 on the opposite side) and antero-posterior (distal of right first molar to the ipsilateral central incisor) measurements were made with a digital caliper on the casts. Data were analyzed by two-way and one-way ANOVA and Tukey’s post-hoc test (P<0.05). Results: Alginate type and the pouring time significantly affected the dimensional stability of alginate impressions (both Ps<0.001). Pouring of Hydrogum 5 impressions can be delayed for up to 120 hours without significant dimensional changes. Alginoplast impressions may be poured after 72 hours, but Tropicalgin should be poured immediately and the storage time should not be more than 24 hours. Conclusion: Immediate pouring of alginate impressions provides the highest accuracy in reproducing the teeth and adjacent tissues; however, this study demonstrated that pouring may be delayed for up to five days using extended-pour (Hydrogum 5) alginates. PMID:25628695

  4. A new portable vibrator for plaster pouring: effect on the marginal fit at cylinder-abutment

    PubMed Central

    de ANDRADE, Pâmela Cândida Aires Ribas; LUTHI, Leonardo Flores; STANLEY, Kyle; CARDOSO, Antônio Carlos

    2012-01-01

    Objective The aim of this study was to test a new portable vibrator for plaster pouring (developed for this purpose), comparing the effect of its use on the accuracy of working cast of implant-supported restorations to the conventional vibrator. Material and methods From a master cast with 2 implants, 30 transfer moldings were made randomly and divided into three groups: Group I (GI): pouring performed in an outsourced dental laboratory with conventional plaster vibrator (10 casts), Group II (GII): pouring performed in the laboratory of the Federal University of Santa Catarina (UFSC) with conventional plaster vibrator (10 casts) and Group III (GIII): pouring performed with the portable vibrator fabricated for this study (10 casts). The position of the analogue and marginal adaptation of the infrastructure were verified by testing the single screw on the master model and on the working model. The measurement of misfit was blindly performed with a precision microscope and analyzing unit, Quadra-Check 200. The data were statistically analyzed by analysis of variance (ANOVA) and the Holm-Sidak test (α=0.05). Results Means±standard deviations were as follows: GI: 19.19±4.73 µm; GII: 21.72±5.41 µm; GIII: 13.5±2.39 µm (P<0.05), with GIII significantly lower as compared to the other groups. Conclusion Within the limitations of this study, it was concluded that a greater accuracy of working cast was achieved when a portable vibrator was used for casting molds. PMID:23138736

  5. Explorer : des clés pour mieux comprendre la matière

    SciTech Connect

    2011-02-14

    Le LHC va-t-il bouleverser les théories de l'infiniment petit ? Les physiciens aimeraient que l'accélérateur fasse trembler le modèle standard. Cette théorie des particules élémentaires et des forces laisse de nombreuses zones d'ombre. Le LHC et ses expériences ont été conçus pour les éclairer.

  6. Explorer : des clés pour mieux comprendre la matière

    ScienceCinema

    None

    2011-10-06

    Le LHC va-t-il bouleverser les théories de l'infiniment petit ? Les physiciens aimeraient que l'accélérateur fasse trembler le modèle standard. Cette théorie des particules élémentaires et des forces laisse de nombreuses zones d'ombre. Le LHC et ses expériences ont été conçus pour les éclairer.

  7. Evaluation of materials and surface treatments for the DWPF melter pour spout bellows protective liner

    SciTech Connect

    Imrich, K.J.; Bickford, D.F.; Wicks, G.G.

    1997-06-27

    A study was undertaken to evaluate a variety of materials and coatings for the DWPF pour spout bellows liner. The intent was to identify materials that would minimize or eliminate adherence of glass on the bellows liner wall and help minimize possible pluggage during glass pouring operations in DWPF. Glass has been observed adhering to the current bellow`s liner, which is made of 304L stainless steel. Materials were identified which successfully allowed molten glass to hit these surfaces and not adhere. Results of this study suggest that if these materials are used in the pouring system glass could still fall into the canister without appreciable plugging, even if an unstable glass stream is produced. The materials should next be evaluated under the most realistic DWPF conditions possible. Other findings of this study include the following: (1) increasing coupon thickness produced a favorable increase in the glass sticking temperature; (2) highly polished surfaces, with the exception of the oxygen-free copper coupon coated with Armoloy dense chromium, did not produce a significant improvement in the glass sticking temperature, increasing angle of contact of the coupon to the falling glass did not yield a significant performance improvement; (3) electroplating with gold and silver and various diffusion coatings did not produce a significant increase in the glass sticking temperature. However, they may provide added oxidation and corrosion resistance for copper and bronze liners. Boron nitride coatings delaminated immediately after contact with the molten glass.

  8. Midazolam intranasal pour arrêter les convulsions en contexte extra-hospitalier

    PubMed Central

    Zelcer, Michal; Goldman, Ran D.

    2016-01-01

    Résumé Question Il arrive parfois que des parents se présentent à ma clinique après que leur enfant eut eu une crise convulsive et qu’une deuxième crise ait lieu à la clinique. En attendant le transfert à l’hôpital, existe-t-il des moyens de mettre fin aux convulsions sans devoir obtenir l’accès intraveineux à la clinique? Réponse Le diazépam par voie intraveineuse est depuis de nombreuses années un traitement de première intention pour mettre fin aux crises convulsives chez les enfants. Il est aussi possible d’administrer le médicament par les voies intramusculaire, rectale ou buccale, mais ces voies d’administration s’accompagnent de plusieurs inconvénients. D’autres données probantes laissent croire que la voie intranasale est rapide et efficace chez les enfants, et le midazolam continue de se montrer prometteur pour mettre fin aux crises convulsives. Doté d’un bon profil d’innocuité, le midazolam intranasal s’utilise en clinique et en contexte préhospitalier pour arrêter les convulsions chez les enfants.

  9. Modelisation frequentielle de la permittivite du beton pour le controle non destructif par georadar

    NASA Astrophysics Data System (ADS)

    Bourdi, Taoufik

    Le georadar (Ground Penetrating Radar (GPR)) constitue une technique de controle non destructif (CND) interessante pour la mesure des epaisseurs des dalles de beton et la caracterisation des fractures, en raison de ses caracteristiques de resolution et de profondeur de penetration. Les equipements georadar sont de plus en plus faciles a utiliser et les logiciels d'interpretation sont en train de devenir plus aisement accessibles. Cependant, il est ressorti dans plusieurs conferences et ateliers sur l'application du georadar en genie civil qu'il fallait poursuivre les recherches, en particulier sur la modelisation et les techniques de mesure des proprietes electriques du beton. En obtenant de meilleures informations sur les proprietes electriques du beton aux frequences du georadar, l'instrumentation et les techniques d'interpretation pourraient etre perfectionnees plus efficacement. Le modele de Jonscher est un modele qui a montre son efficacite dans le domaine geophysique. Pour la premiere fois, son utilisation dans le domaine genie civil est presentee. Dans un premier temps, nous avons valide l'application du modele de Jonscher pour la caracterisation de la permittivite dielectrique du beton. Les resultats ont montre clairement que ce modele est capable de reproduire fidelement la variation de la permittivite de differents types de beton sur la bande de frequence georadar (100 MHz-2 GHz). Dans un deuxieme temps, nous avons montre l'interet du modele de Jonscher en le comparant a d'autres modeles (Debye et Debye-etendu) deja utilises dans le domaine genie civil. Nous avons montre aussi comment le modele de Jonscher peut presenter une aide a la prediction de l'efficacite de blindage et a l'interpretation des ondes de la technique GPR. Il a ete determine que le modele de Jonscher permet de donner une bonne presentation de la variation de la permittivite du beton dans la gamme de frequence georadar consideree. De plus, cette modelisation est valable pour differents

  10. Development of a complex type of pour point-viscosity depressant and infrared spectrum research

    SciTech Connect

    Zhang Fusheng; Wang Biao

    1995-11-01

    EMS, a complex type of pour point-viscosity depressant for crudes, is composed of EVA, MVA [molecular structure shown for both in the paper] and Surfactant. After adding EMS into the crudes, a very nice result in reducing pour point and viscosity for Daqing, Jianghan and Jidong crudes was obtained. From the research result of infrared spectroscopy of the interactions between EMS or its components and wax or mixture of resin and asphaltene isolated from three crudes, it has been shown that the area ratio of the double absorption peaks of 719 cm{sup {minus}1} and 729 cm{sup {minus}1} or 1,368 cm{sup {minus}1} and 1,378 cm{sup {minus}1} changed remarkably after EMS or its components were added into wax. It can be inferred that the cocrystallization probably happened between the EMS or its components and the wax. The position of the 4,000--3,000 cm{sup {minus}1} infrared absorption peak of the mixture of resin and asphaltene moved to the lower wavenumber, and the ratio of the area of 1,373 cm{sup {minus}1} absorption peak (methyl) to the combination area of 748, 810 and 871 cm{sup {minus}1} absorption peak (aromatics) increased remarkably. It can be inferred that the pour point-viscosity depressant molecules destroyed the original hydrogen bonds and overlapping of the aromatic ring planes among resin and asphaltene molecules to form a new cubic molecular structure and new hydrogen bonds with the results the viscosity of crude oil will be reduced.

  11. Plasma Sprayed Pour Tubes and Other Melt Handling Components for Use in Gas Atomization

    SciTech Connect

    Byrd, David; Rieken, Joel; Heidloff, Andy; Besser, Matthew; Anderson, Iver

    2011-04-01

    Ames Laboratory has successfully used plasma sprayed ceramic components made from yttria stabilized zirconia as melt pouring tubes for gas atomization for many years. These tubes have proven to be strong, thermal shock resistant and versatile. Various configurations are possible both internally and externally. Accurate dimensions are achieved internally with a machined fugitive graphite mandrel and externally by diamond grinding. The previous study of the effect of spray parameters on density was extended to determine the effect of the resulting density on the thermal shock characteristics on down-quenching and up-quenching. Encouraging results also prompted investigation of the use of plasma spraying as a method to construct a melt pour exit stopper that is mechanically robust, thermal shock resistant, and not susceptible to attack by reactive melt additions. The Ames Laboratory operates two close-coupled high pressure gas atomizers. These two atomizers are designed to produce fine and coarse spherical metal powders (5{mu} to 500{mu} diameter) of many different metals and alloys. The systems vary in size, but generally the smaller atomizer can produce up to 5 kg of powder whereas the larger can produce up to 25 kg depending on the charge form and density. In order to make powders of such varying compositions, it is necessary to have melt systems capable of heating and containing the liquid charge to the desired superheat temperature prior to pouring through the atomization nozzle. For some metals and alloys this is not a problem; however for some more reactive and/or high melting materials this can pose unique challenges. Figure 1 is a schematic that illustrates the atomization system and its components.

  12. Traitement par plasma thermique d'une liqueur caustique pour la destruction des cyanures

    NASA Astrophysics Data System (ADS)

    Fortin, Luc

    L'objectif principal de cette recherche est d'evaluer la possibilite de traiter le lixiviat de brasques usees produit par le procede LCL&L (Lixiviation a bas caustique et chaulage) par contact direct avec un jet de plasma thermique. L'utilisation d'un chalumeau au plasma permet d'eliminer les problemes de reaction avec les produits de combustion relies a l'utilisation de chalumeaux conventionnels (e.g. carbonatation du NaOH en Na2CO3). Le fait de se servir de ce type de chalumeau en mode submerge pour le traitement d'une solution liquide constitue l'originalite du projet. Les essais effectues dans le cadre de ce travail experimental sont realises a l'echelle banc d'essai dans un premier temps. Ils visent a determiner le taux de decomposition des cyanures contenus dans le lixiviat sous des conditions de plasma thermique en fonction de differents parametres et a faire la mise a l'echelle d'un reacteur pilote. La puissance electrique fournie au chalumeau, la temperature et la pression d'operation, le point d'addition d'eau, le volume de lixiviat traite et l'addition de peroxyde d'hydrogene (H2O2) comme co-reactif ont tous un impact sur le taux de destruction des cyanures trouve. Sous toutes les conditions etudiees, le reacteur plasma offre un taux de destruction plus rapide qu'un reacteur agite sous pression pour une meme concentration en cyanures. Ainsi, la comparaison de la constante cinetique obtenue pour le reacteur agite avec une constante similaire pour le reacteur plasma (pente du graphique -ln(C/C0) en fonction du temps) est de 0.04x10-3 s-1 vs 0.59x10-3 s-1 a 100°C et de 1.85x10-3 s-1' vs 3x10 -3 s-1s a 170°C. Ces resultats confirment que le plasma joue un role important sur la decomposition des cyanures et qu'il contribue a en augmenter le taux de destruction. Suite aux connaissances acquises sur le banc d'essai, un reacteur pilote est concu. Un chalumeau au plasma d'une puissance de 60 kW-150 kW et fonctionnant avec l'air comme gaz plasmagene y est

  13. Therapeutic and residual efficacy of a pour-on formulation of Novaluron against Rhipicephalus (Boophilus) microplus (Acari:Ixodidae) on infested cattle

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effectiveness of a pour-on formulation of novaluron (Novatack Pour-on 5% AI), a benzoylphenyl urea acaricide, was evaluated by applying low and high rates (1 mg/20 kg body weight and 1 mg/10 kg body weight) to cattle infested with all parasitic developmental stages (adults, nymphs, and larvae) o...

  14. Therapeutic and residual efficacy of a pour-on formulation of Novaluron against Rhipicephalus (Boophilus) microplus (Acari: Ixodidae) on infested cattle

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effectiveness of a pour-on formulation of novaluron (Novatack Pour-on 5% AI), a benzoylphenyl urea acaricide, was evaluated by applying low and high rates (1 mg/20 kg body weight and 1 mg/10 kg body weight) to cattle infested with all parasitic developmental stages (adults, nymphs, and larvae) o...

  15. Développement de matériaux pour les piles à combustibles SOFC

    NASA Astrophysics Data System (ADS)

    Dubourdieu, G.; Gauthier, G.; Henry, J. Y.; Sanchette, F.; Delépine, J.; Lefebvre-Joud, F.

    2002-04-01

    Dans le cadre des nouveaux programmes du CEA dédiés aux Nouvelles Technologies pour l'Energie, l'un des axes concerne les piles à combustible haute température et tout solide (SOFC). Deux voies de recherche sont présentées ici ; l'une traite de l'élaboration d'électrolytes connus - de type zircone yttriée - en couche mince, par des techniques de dépôt PVD ou CVD à injection, ceci dans le but d'un fonctionnement à plus basse température. L'autre a trait au développement de matériaux d'anode compatibles avec l'utilisation directe du méthane à la place de l'hydrogène. Les chromates de lanthane substitué par le strontium, dont une méthode de synthèse sous forme de poudres très divisées est présentée ici, semblent être des matériaux prometteurs pour cette application, à condition qu'ils ne subissent pas de dégradation en fonctionnement.

  16. La dermoscopie pour la détection des mélanomes en pratique familiale

    PubMed Central

    Herschorn, Andrea

    2012-01-01

    Résumé Objectif Évaluer l’exactitude diagnostique et l’utilité clinique de la dermoscopie pour la détection de mélanomes en pratique familiale. Sources des données Nous avons fait une recension dans les bases de données Ovid MEDLINE (de 1946 à juin 2011), EMBASE, PubMed et Cochrane à l’aide des expressions suivantes en anglais: dermoscopy, dermatoscopy, epiluminescence microscopy, family practice, general practice, primary health care, melanoma, skin neoplasms et pigmented nevus. Pour être prises en considération, les études devaient être des articles de recherche primaire ayant pour sujets des médecins de famille, ainsi que la formation en dermoscopie et son utilisation en tant qu’intervention. La recherche a produit 4 articles qui répondaient aux critères d’inclusion et présentaient des données probantes de niveau I selon la définition du Groupe d’étude canadien sur les soins de santé préventifs. Message principal Dans le milieu de la pratique familiale, la dermoscopie a une sensibilité plus élevée que l’examen à l’œil nu pour la détection des mélanomes sans avoir, généralement, une spécificité moins grande. La dermoscopie aide aussi à accroître le degré de confiance des médecins de famille dans leur diagnostic préliminaire des lésions. L’utilisation de la dermoscopie plutôt que l’examen à l’œil nu augmente la probabilité qu’une lésion jugée cancéreuse le soit de fait et qu’une lésion jugée bénigne le soit en réalité. Conclusion Il est démontré que la dermoscopie est un outil utile et relativement peu coûteux pour la détection des mélanomes en pratique familiale. Cette technique rend les médecins de famille plus confiants dans l’exactitude de leurs demandes de consultations auprès de dermatologues et contribue à diminuer les biopsies inutiles. La dermoscopie peut se révéler plus particulièrement utile dans l’examen des patients à risque élevé de mélanomes, étant donn

  17. Hernie inguinale en Afrique subsaharienne: quelle place pour la technique de Shouldice?

    PubMed Central

    Traoré, Drissa; Diarra, Lasseny; Coulibaly, Bréhima; Bengaly, Brehima; Togola, Birama; Traoré, Alhassane; Traoré, Hamady; Ongoïba, Nouhoum; Sissoko, Filifing; Koumaré, Abdel Karim

    2015-01-01

    L'objectif était d’étudier l'aspect épidémio-clinique et thérapeutique de la hernie inguinale selon la technique de Shouldice. Nous avons réalisé une étude rétrospective, portant sur les patients opérés pour hernie inguinale selon la technique de Shouldice dans le service de chirurgie B du CHU du Point G, Bamako, Mali. Il a été enregistré 225patients opérés selon la technique de Shouldice. L’âge moyen était de 49 ans +/- 17,7. Il y avait 90,7% (204) hommes soit un sex-ratio de 9,7. Les cultivateurs, les ménagères et les ouvriers ont représenté 51,1% (115). Dans 75,2% (169) les patients ont consulté pour tuméfaction inguinale. En pré opératoire, la hernie était compliquée chez 82 (36,4%) patients dont 24 cas de récidive. L’étranglement herniaire a été la principale complication pré opératoire 58,5% (48/82). Les suites opératoires à un an ont été simples chez 94,2%(210) des patients; elles étaient marquées par 8 cas de récidive, 4 cas de névralgie, 2 cas d'atrophie testiculaire, 1 cas de chéloïde. La technique de Shouldice est la technique de choix pour la cure de la hernie inguinale dans les pays en voie de développement à cause du bon résultat et son coût peu onéreux par rapport aux autres techniques utilisant des dispositifs médicaux. PMID:26664551

  18. Approche pour les comportements sexuels inappropriés chez des personnes atteintes de démence

    PubMed Central

    Joller, Petra; Gupta, Neeraj; Seitz, Dallas P.; Frank, Christopher; Gibson, Michelle; Gill, Sudeep S.

    2013-01-01

    Résumé Objectif Présenter aux médecins de famille une mise à jour sur l’approche au diagnostic et à la prise en charge des comportements sexuels inappropriés (CSI) chez les personnes atteintes de démence. Sources des données On a fait une recherche dans MEDLINE et EMBASE pour cerner des articles pertinents publiés avant juin 2012. On n’a trouvé aucune étude de niveau I; la plupart des articles fournissaient des données probantes de niveau III. Message principal Les comportements sexuels inappropriés sont fréquents chez les personnes atteintes de démence. Divers facteurs (p. ex., culturels, religieux, perspectives sociétales de la sexualité gériatrique, questions médicolégales) pourraient compliquer l’évaluation de tels comportements et doivent être pris en compte pour permettre une prise en charge appropriée à chaque patient. Il existe des outils pour documenter les CSI. Des interventions créatives non pharmacologiques pour les CSI pourraient être efficaces quand elles sont adaptées à chaque patient. Certaines pharmacothérapies (p. ex., antidépresseurs, antiandrogènes, antipsychotiques et anticonvulsifs) ont été proposées pour les symptômes qui ne répondent pas aux interventions non pharmacologiques. Par ailleurs, les données probantes à l’appui des traitements à l’aide de médicaments sont limitées, les effets secondaires demeurent un aspect important à considérer et il est incertain s’ils devraient être utilisés comme traitement de première ou de deuxième intention. Conclusion Quoiqu’il n’y ait pas d’algorithme de traitements empiriquement établi pour les CSI reliés à la démence, les ouvrages actuels offrent certaines données probantes concernant diverses thérapies pharmacologiques et non pharmacologiques. Des recherches de grande qualité plus approfondies sont nécessaires de toute urgence pour guider les médecins de famille qui prennent en charge des patients qui ont des CSI reliés à la

  19. Analyse de L'ancrage des Vortex Intergrains pour le Yttrium BARYUM(2) CUIVRE(3) OXYGENE(7) Polycristallin

    NASA Astrophysics Data System (ADS)

    Fournier, Patrick

    Le Modele de l'Etat Critique Generalise (MECG) est utilise pour decrire les proprietes magnetiques et de transport du YBa_2Cu_3O _7 polycristallin. Ce modele empirique permet de relier la densite de courant critique a la densite de lignes de flux penetrant dans la region intergrain. Deux techniques de mesures sont utilisees pour caracteriser nos materiaux. La premiere consiste a mesurer le champ au centre d'un cylindre creux en fonction du champ magnetique applique pour des temperatures comprises entre 20 et 85K. En variant l'epaisseur de la paroi du cylindre creux, il est possible de suivre l'evolution des cycles d'hysteresis et de determiner des champs caracteristiques qui varient en fonction de cette dimension. En utilisant un lissage des resultats experimentaux, nous determinons J _{co}, H_ {o} et n, les parametres du MECG. La forme des cylindres, avec une longueur comparable au diametre externe, entrai ne la presence d'un champ demagnetisant qui peut etre inclus dans le modele theorique. Ceci nous permet d'evaluer la fraction du volume ecrante, f _{g}, ainsi que le facteur demagnetisant N. Nous trouvons que J_{ co}, H_{o} et f_{g} dependent de la temperature, tandis que n et N (pour une epaisseur de paroi fixe) n'en dependent pas. La deuxieme technique consiste a mesurer le courant critique de lames minces en fonction du champ applique pour differentes temperatures. Nous utilisons un montage que nous avons developpe permettant d'effectuer ces mesures en contact direct avec le liquide refrigerant, i.e. dans l'azote liquide. Nous varions la temperature du liquide en variant la pression du gaz au-dessus du bain d'azote. Cette methode nous permet de balayer des temperatures entre 65K et la temperature critique du materiau ({~ }92K). Nous effectuons le lissage des courbes de courant critique en fonction du champ applique encore a l'aide du MECG, pour a nouveau obtenir ses parametres. Pour trois echantillons avec des traitements thermiques differents, les parametres

  20. Détection homodyne pour mémoires holographiques à stockage bit à bit

    NASA Astrophysics Data System (ADS)

    Maire, G.; Pauliat, G.; Roosen, G.

    2006-10-01

    Les mémoires holographiques à stockage bit à bit sont une alternative intéressante à l'approche holographique conventionnelle par pages de données du fait de leur architecture optique simplifiée. Nous proposons et validons ici une procédure de lecture adaptée à de telles mémoires et basée sur une détection homodyne de l'amplitude diffractée par les hologrammes. Ceci permet d'augmenter la quantité de signal utile détecté et s'avère donc prometteur pour accroître le taux de transfert de données de ces mémoires.

  1. Soft Drink “Pouring Rights”: Marketing Empty Calories to Children

    PubMed Central

    Nestle, Marion

    2000-01-01

    Healthy People 2010 objectives call for meals and snacks served in schools to contribute to overall diets that meet federal dietary guidelines. Sales in schools of foods and drinks high in calories and low in nutrients undermine this health objective, as well as participation in the more nutritious, federally sponsored, school lunch programs. Competitive foods also undermine nutrition information taught in the classroom. Lucrative contracts between school districts and soft drink companies for exclusive rights to sell one brand are the latest development in the increasing commercialization of school food. These contracts, intended to elicit brand loyalty among young children who have a lifetime of purchases ahead of them, are especially questionable because they place schools in the position of “pushing” soft drink consumption. “Pouring rights” contracts deserve attention from public health professionals concerned about the nutritional quality of children's diets. Imagesp308-ap313-a PMID:11059423

  2. Response of Triatoma infestans to pour-on cypermethrin applied to chickens under laboratory conditions.

    PubMed

    Amelotti, Ivana; Catalá, Silvia S; Gorla, David E

    2009-05-01

    This article reports the effects of a pour-on formulation of cypermethrin (6% active ingredient) applied to chickens exposed to Triatoma infestans, the main vector of Chagas disease in rural houses of the Gran Chaco Region of South America. This study was designed as a completely random experiment with three experimental groups and five replicates. Third instar nymphs were fed on chickens treated with 0, 1 and 2 cc of the formulation. Nymphs were allowed to feed on the chickens at different time intervals after the insecticide application. Third-instar nymphs fed on treated chickens showed a higher mortality, took less blood during feeding and had a lower moulting rate. The mortality rate was highest seven days after the insecticide solution application and blood intake was affected until 30 days after the application of the solution. PMID:19547876

  3. Modelisation de photodetecteurs a base de matrices de diodes avalanche monophotoniques pour tomographie d'emission par positrons

    NASA Astrophysics Data System (ADS)

    Corbeil Therrien, Audrey

    La tomographie d'emission par positrons (TEP) est un outil precieux en recherche preclinique et pour le diagnostic medical. Cette technique permet d'obtenir une image quantitative de fonctions metaboliques specifiques par la detection de photons d'annihilation. La detection des ces photons se fait a l'aide de deux composantes. D'abord, un scintillateur convertit l'energie du photon 511 keV en photons du spectre visible. Ensuite, un photodetecteur convertit l'energie lumineuse en signal electrique. Recemment, les photodiodes avalanche monophotoniques (PAMP) disposees en matrice suscitent beaucoup d'interet pour la TEP. Ces matrices forment des detecteurs sensibles, robustes, compacts et avec une resolution en temps hors pair. Ces qualites en font un photodetecteur prometteur pour la TEP, mais il faut optimiser les parametres de la matrice et de l'electronique de lecture afin d'atteindre les performances optimales pour la TEP. L'optimisation de la matrice devient rapidement une operation difficile, car les differents parametres interagissent de maniere complexe avec les processus d'avalanche et de generation de bruit. Enfin, l'electronique de lecture pour les matrices de PAMP demeure encore rudimentaire et il serait profitable d'analyser differentes strategies de lecture. Pour repondre a cette question, la solution la plus economique est d'utiliser un simulateur pour converger vers la configuration donnant les meilleures performances. Les travaux de ce memoire presentent le developpement d'un tel simulateur. Celui-ci modelise le comportement d'une matrice de PAMP en se basant sur les equations de physique des semiconducteurs et des modeles probabilistes. Il inclut les trois principales sources de bruit, soit le bruit thermique, les declenchements intempestifs correles et la diaphonie optique. Le simulateur permet aussi de tester et de comparer de nouvelles approches pour l'electronique de lecture plus adaptees a ce type de detecteur. Au final, le simulateur vise a

  4. Developpement des betons semi autoplacants a rheologie adaptee pour des infrastructures

    NASA Astrophysics Data System (ADS)

    Sotomayor Cruz, Cristian Daniel

    Au cours des dernières décennies, les infrastructures canadiennes et québécoises comportent plusieurs structures en béton armé présentant des problèmes de durabilité dus aux conditions climatiques sévères, à la mauvaise conception des structures, à la qualité des matériaux, aux types des bétons choisis, aux systèmes de construction ou à l'existence d'événements incontrôlables. En ce qui concerne le choix du béton pour la construction des infrastructures, une vaste gamme de béton divisée en deux principaux types peut être utilisée: le béton conventionnel vibré (BCV) et le béton autoplaçant (BAP). Dans le cas d'un BCV, la consolidation inadéquate par vibration a été un problème récurrent, occasionnant des dommages structuraux. Ceci a conduit à une réduction de la durabilité et à une augmentation du coût d'entretien et de réparation des infrastructures. Rien que l'utilisation d'un BAP a des avantages tels que l'élimination de la vibration, la réduction des coûts de main d'oeuvre et l'amélioration de la qualité des structures, néanmoins, le coût initial d'un BAP par rapport à un BCV ne permet pas encore de généraliser son utilisation dans l'industrie de la construction. Ce mémoire présente la conception d'une nouvelle gamme de béton semi-autoplaçant pour la construction des infrastructures (BSAP-I) exigeant une vibration minimale. Il s'agit de trouver un équilibre optimal entre la rhéologie et le coût initial du nouveau béton pour conférer une bonne performance structurale et économique aux structures. Le programme expérimental établi a premièrement permis d'évaluer la faisabilité d'utilisation des BSAP-I pour la mise en place des piliers d'une infrastructure de pont à Sherbrooke. En plus, l'utilisation d'un plan d'expériences a permis l'évaluation de trois paramètres de formulation sur les propriétés des mélanges de BSAP-I à l'état frais et durci. Finalement, l'évaluation de la performance des

  5. Structure electronique de nanorubans de graphene avec des contacts metalliques: Une etude ab initio

    NASA Astrophysics Data System (ADS)

    Archambault, Chloe

    Graphene, a graphite monolayer presenting novel exciting properties, has attracted much attention recently in the scientific community as well as in the high-technology industry. In electronics, nanoribbons -- narrow strips of graphene which happen to be semiconducting-- could possibly allow further miniaturization of electronic devices such as transistors because of their atomic thickness. On the other hand, once making devices, the problem of metallic contacts, which can have critical impact at the nanoscopic scale, cannot be evaded. For example, metal induced gap states may short-circuit very short devices. With this in mind, the interaction of gold, palladium and titanium contacts with finite size graphene nanoribbons has been studied using ab initio density functional theory calculations. This theoretical approach made it possible to study separately and then conjugate four important aspects of the metal-ribbon interaction: bonding, charge transfer, electrostatics and metal induced gap states. Another goal of this project was to study size effects related to the ribbons' dimensions and to estimate the minimal channel length necessary for a device to operate as expected without the unwanted effect of induced gap states. Aside from the high precision achieved, these calculations stand out from earlier studies because they take into account finite size effects which often prevail in small ribbons. Using this model for the metal-nanoribbon junction, it was shown that, as for two-dimensional graphene, the bonding between a ribbon and a metal can be of two types depending on the electronic configuration of the metal. In the first case, physisorption, weak bonding resulting in a large separation distance between ribbon and electrode, is illustrated by the gold contact. On the other hand, titanium, because of its high density of states at the Fermi level, binds more strongly with graphene nanoribbons. This chemisorption is characterized by strong hybridization between the metal and the ribbon's orbitals. This leads to the apparition of intense evanescent gap states in the ribbon. As for palladium, it represents an intermediate case showing some but not as much hybridization. For all three metals, right under the contact, we observe a net decrease of electron density in the ribbon in favour of the contact. Effectively, any kind of bonding is generally associated with charge transfer necessary to balance the work function difference. As expected, a metal with a large work function such as gold and palladium tends to attract electrons. However, this behaviour is surprising from titane whose work function is much smaller. This can only be explained by considering the large hybridization of the ribbon's orbitals. Moreover, the charge transfer is not restricted to the area under the contact as an evanescent charge can also be observed in the channel. This charge results from the occupation of metal induced gap states and its sign depends on the position of the charge neutrality point. The calculations presented don't take into account the effect of temperature. Nevertheless, the position of the Fermi level relative to the ribbon's bands suggests that at non-zero temperature, gold and palladium would p dope the graphene nanoribbons while titanium would have the opposite effect. The charge redistribution in the junction generates a molecular-sized dipole which is responsible for the slowly varying three-dimensional potential profile, a particularity of low dimensional systems. A potential barrier thus appears at the interface and controls band curvature in the device, but it can also constitute an obstacle to efficient charge injection. The intimate relation between the titanium contact and the ribbons seems to maximize screening and reduce considerably the height of the barrier, which could turn out to be beneficial. Finally, metal induced gap states slowly decaying in the channel have been observed directly in graphene nanoribbons for the first time. Their characteristic evanescent shape is clearly distinguishable. The extent of the gap states was measured to be on the order of a nanometer. It depends mostly on the ribbon's bandgap which varies both with its length and width. The bandgap, which can easily be measured experimentally, could thus be a useful tool to predict the penetration of gap states, a must-have information in order to limit the undesired effect of gap states since it sets for a device the minimal channel length (˜1-2 nm). In summary, these theoretical results could be used as a guideline in the conception of electronic devices made of graphene nanoribbons in which doping and potential profile need to be optimized while making sure that metal induced gap states do not compromise normal operation.

  6. Comparison of most probable number and pour plate procedures for isolation and enumeration of sulphite-reducing Clostridium spores and group D faecal streptococci from oysters.

    PubMed

    Easterbrook, T J; West, P A

    1987-05-01

    A comparative study of methods to enumerate sulphite-reducing Clostridium spores and Group D faecal streptococci in oysters demonstrated that pour plate solid agar techniques gave higher counts than liquid broth most probable number procedures. Reinforced clostridial broth with supplements to detect sulphite reduction was compared with pour plates of egg yolk-free tryptose sulphite cycloserine agar incubated at 37 degrees C for 24 h. Azide dextrose broth was compared with pour plates using Slanetz and Bartley (SB) agar or KF-streptococcus agar at 37 degrees C. Most probable number procedures used for both groups of organisms gave excessive numbers of improbable tube combinations. For enumeration of Group D faecal streptococci, a pour plate technique using SB agar incubated at 37 degrees C for 48 h is recommended. PMID:3112087

  7. Nanofabrication de boites quantiques laterales pour l'optimisation de qubits de spin

    NASA Astrophysics Data System (ADS)

    Camirand Lemyre, Julien

    On présente dans ce travail un nouveau type de qubit de spin dont les performances reposent sur les propriétés d'un seul électron dans une double boîte quantique. Le fort moment dipolaire de la double boite combiné à une large variation du champ magnétique entre les deux boîtes permettrait de réaliser des opérations logiques plus rapidement que dans une seule boîte quantique. Pour maximiser les variations du champ magnétique, on utilisera un micro-aimant placé le plus près possible d'une des deux boîtes. À cette fin, une hétérostructure de GaAs/A1GaAs sur laquelle sont déposées des grilles d'aluminium a été utilisée pour former une double boite quantique latérale. L'occupation par un seul électron de la double boîte est confirmée par des mesures de transport électrique à basse température ainsi que par l'observation du blocage de spin. De plus, un procédé d'oxydation des grilles par plasma d'oxygène a été développé. Une étude des propriétés de l'oxyde formé par cette méthode montre qu'il est possible de placer un micro-aimant directement sur la surface de l'hétérostructure sans affecter l'isolation électrique entre les grilles. Cette nouvelle approche permet de produire des champs magnétiques encore plus intenses que dans les expériences antérieures, pour lesquelles le micro-aimant est placé beaucoup plus loin de la surface. L'ensemble du procédé de fabrication, de la photolithographie à l'électrolithographie, a été développé au cours de ce travail dans les salles blanches du département de génie électrique et dans les salles propres du département de physique de l'Université de Sherbrooke. Ce travail est une étape importante dans la réalisation de qubits de spin plus performants dans les boîtes quantiques latérales. Mots-clés: Information quantique, Spin, Rotations ultra-rapides, Boîtes quantiques latérales, Micro-aimants, Oxydation plasma, Nanofabrication.

  8. Êtes-vous prêt pour un code bleu en cabinet?

    PubMed Central

    Moore, Simon

    2015-01-01

    Résumé Problème traité Les urgences médicales sont fréquentes dans le cabinet des médecins de famille, mais nombreux sont ceux qui ne sont pas préparés à répondre aux urgences. Une vidéo éducative en ligne traitant des urgences en cabinet pourrait améliorer la réponse des médecins et de leur personnel aux urgences. Un outil comme celui-là n’a jamais été décrit auparavant. Objectif du programme Utiliser les pratiques fondées sur les données probantes pour produire une vidéo éducative expliquant comment se préparer à parer à une urgence dans un cabinet médical, disséminer la vidéo en ligne et évaluer l’attitude des médecins et de leur personnel à l’égard de la vidéo. Description du programme Une vidéo de 6 minutes a été produite en s’appuyant sur une revue de la littérature récente et des politiques des organismes réglementaires canadiens. La vidéo décrit l’équipement d’urgence recommandé, l’amélioration de la réponse à l’urgence et la formation du personnel en cabinet. Les médecins et leur personnel ont été invités à visualiser la vidéo en ligne à www.OfficeEmergencies.ca. L’opinion de l’auditoire sur le format de la vidéo et son contenu a été évaluée par l’entremise d’un sondage (N = 275). Conclusion Les résultats du sondage indiquent que la vidéo était pertinente et bien présentée, et le format en ligne était pratique et satisfaisant. Les participants s’inscriraient à d’autres formations ayant recours à cette technologie et étaient d’accord pour dire que ce programme améliorerait les soins aux patients.

  9. Realisation d'un detecteur de radioactivite pour un systeme microfluidique

    NASA Astrophysics Data System (ADS)

    Girard Baril, Frederique

    Pour etablir le comportement pharmacocinetique de nouveaux radiotraceurs en imagerie moleculaire, il est necessaire d'approfondir l'analyse realisee a partir d'une image par l'ajout d'une mesure dynamique de la radioactivite dans le sang. L'Universite de Sherbrooke developpe presentement une plateforme microfluidique d'echantillonnage et d'analyse permettant la mesure de la radioactivite du plasma en temps reel. L'objectif du present projet de maitrise etait de realiser le composant optoelectronique responsable de la detection des positrons et de l'integrer a la puce microfluidique. L'option retenue a ete l'utilisation de photodiodes PIN en silicium. Un procede de fabrication, ainsi qu'une serie de photomasques ont ete developpes afin de produire une premiere iteration de prototypes. Les detecteurs ont ete concus de maniere a optimiser leur sensibilite en fonction du type de rayonnement a detecter. En effet, la region de detection doit etre suffisamment epaisse et sensible pour absorber le maximum de particules energetiques. Egalement, il est essentiel de minimiser le courant de fuite en noirceur afin d'obtenir un photocourant directement proportionnel a l'energie des radiations incidentes. Les caracteristiques electriques obtenues avec les premiers detecteurs ont ete demontrees proches des performances de detecteurs commerciaux similaires. De plus, il a ete possible d'integrer un canal microfluidique au substrat contenant les photodiodes et d'en realiser l'encapsulation sans alterer les performances electriques initiales des detecteurs. Une courbe de l'activite radioactive du 18F a ete mesuree, celle-ci se comparant a l'activite theorique associee a ce radioisotope communement utilise en TEP. Enfin, un spectre en energie des emissions radiatives du 18F a ete mesure et compare aux performances de systemes utilisant des photodiodes commerciales. Il a ete demontre que le prototype offrait un rapport signal sur bruit similaire aux systemes bases sur des photodiodes

  10. Recommandations pour le dépistage de l’hypertension chez les adultes canadiens

    PubMed Central

    Lindsay, Patrice; Gorber, Sarah Connor; Joffres, Michel; Birtwhistle, Richard; McKay, Donald; Cloutier, Lyne

    2013-01-01

    Résumé Objectif Présenter des recommandations concernant le dépistage de l’hypertension chez les adultes de 18 ans et plus qui n’ont pas reçu antérieurement de diagnostic d’hypertension. Qualité des données Les données probantes sont tirées d’une recension systématique dans MEDLINE, EMBASE et la base de données des synthèses systématiques de la Collaboration Cochrane (EBM Reviews), de janvier 1985 à septembre 2011. Les types d’études retenues se limitaient aux études randomisées contrôlées, aux synthèses systématiques et aux études observationnelles avec groupes témoins. Message principal Trois fortes recommandations se sont dégagées de données probantes de qualité modérée. Il est recommandé de mesurer la pression artérielle à toutes les consultations appropriées en soins primaires, conformément aux techniques actuelles décrites dans les recommandations du Programme éducatif canadien sur l’hypertension pour la mesure de la pression artérielle en cabinet et en soins ambulatoires. Les critères du Programme éducatif canadien sur l’hypertension pour l’évaluation et le diagnostic de l’hypertension devraient s’appliquer aux personnes chez qui on observe une pression artérielle élevée. Conclusion À la suite d’un examen des plus récentes données probantes, le Groupe d’étude canadien sur les soins de santé préventifs continue de recommander la mesure de la pression artérielle lors des consultations périodiques auprès du médecin.

  11. Effects of Mold Temperature and Pouring Temperature on the Hot Tearing of Cast Al-Cu Alloys

    NASA Astrophysics Data System (ADS)

    Li, Shimin; Sadayappan, Kumar; Apelian, Diran

    2016-07-01

    The effects of mold temperature and pouring temperature on hot tearing formation and contraction behavior of a modified Al-Cu alloy 206 (M206) have been studied. The experiments were conducted using a newly developed Constrained Rod Mold, which simultaneously measures the contraction force/time/temperature during solidification for the restrained casting or linear contraction/time/temperature for a relaxed casting. Three mold temperatures [473 K, 573 K, and 643 K (200 °C, 300 °C, and 370 °C)] and three pouring temperatures [superheat of 50 K, 100 K, and 150 K (50 °C, 100 °C, and 150 °C)] were studied, and alloy A356 was used as reference for comparison. The results confirm that alloy A356 has high resistance to hot tearing. Hot tearing did not occur for the three mold temperatures evaluated, whereas alloy M206 exhibited significant hot tearing for the same casting and mold temperature conditions. Hot tearing severity and linear contraction in alloy 206 decreased significantly with increasing mold temperature. Increasing pouring temperature increases hot tearing in alloy M206, but the effect is not as significant as that of mold temperature. The results and underlying mechanism of these effects are discussed in correlation with the thermomechanical properties and microstructures.

  12. [Pouring water over the body--hydrotherapy prescriptions in the late Middle Ages].

    PubMed

    Jacoby, Joachim

    2002-01-01

    Once identified, an illness is met or fought against by an appropriate therapy. The diverse use of water holds a significant place among the therapeutic means which had been developed in Western medicine ever since antiquity. The essay deals with one particular form of application, namely, the gush of water. Focus is laid on the period around 1500. As the relevant medical treatises are based directly on Greek or Roman authors (Hippocrate, Galen, Celsus) or are even commentaries of Arabic handbooks in their Latin translations (Avicenna, Rhazes), antique medicine inevitably had also to be taken into account. The pouring of water, alone or in combination with other prescriptions, was applicable in a variety of illnesses as fevers, pains of the joints, psychic diseases, or even headaches. To counteract the causes (or symptoms) of a disease the water quality could be adjusted by changing its temperature, by adding certain substances (oils, herb extracts or decoctions) or by varying the way of application. The gush of water could serve many purposes and was prescribed to soothe, to refrigerate, to stop a swelling, to widen pores, to shock the patient and even, given the underlying humoural conception of men's nature, to draw away humours from one part of the body to another. The water gush, hence, was not restricted to be used in the case of one particular illness only but was considered an almost general therapeutic means. PMID:12168234

  13. La planification préalable des soins pour les patients en pédiatrie

    PubMed Central

    2008-01-01

    RÉSUMÉ Les progrès médicaux et technologiques ont permis d’ac-croître les taux de survie et d’améliorer la qualité de vie des nourrissons, des enfants et des adolescents ayant des maladies chroniques mettant la vie en danger. La planifi-cation préalable des soins inclut le processus relié aux discussions sur les traitements essentiels au maintien de la survie et la détermination des objectifs des soins de longue durée. Les dispensateurs de soins pédiatriques ont l’obligation éthique d’assimiler cet aspect des soins médicaux. Le présent document de principes vise à aider les dispensateurs de soins à discuter de la planification préalable des soins des patients pédiatriques dans diverses situations. La planification préalable des soins exige des communications efficaces afin de clarifier les objectifs des soins et de s’entendre sur les traitements pertinents ou non pour réaliser ces objectifs, y compris les mesures de réanimation et les mesures palliatives.

  14. ANALYTICAL RESULTS OF MOX COLEMANITE CONCRETE SAMPLES POURED AUGUST 29, 2012

    SciTech Connect

    Best, D.; Cozzi, A.; Reigel, M.

    2012-12-20

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. Samples poured 8/29/12 were received on 9/20/2012 and analyzed. The average total density of each of the samples measured by the ASTM method C 642 was within the lower bound of 1.88 g/cm{sup 3}. The average partial hydrogen density of samples 8.6.1, 8.7.1, and 8.5.3 as measured using method ASTM E 1311 met the lower bound of 6.04E-02 g/cm{sup 3}. The average measured partial boron density of each sample met the lower bound of 1.65E-01 g/cm{sup 3} measured by the ASTM C 1301 method. The average partial hydrogen density of samples 8.5.1, 8.6.3, and 8.7.3 did not meet the lower bound. The samples, as received, were not wrapped in a moist towel as previous samples and appeared to be somewhat drier. This may explain the lower hydrogen partial density with respect to previous samples.

  15. ANALYTICAL RESULTS OF MOX COLEMANITE CONCRETE SAMPLES POURED AUGUST 29, 2012

    SciTech Connect

    Cozzi, A.; Best, D.; Reigel, M.

    2012-10-30

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. Samples poured 8/29/12 were received on 9/20/2012 and analyzed. The average total density of each of the samples measured by the ASTM method C 642 was within the lower bound of 1.88 g/cm{sup 3}. The average partial hydrogen density of samples 8.6.1, 8.7.1, and 8.5.3 as measured using method ASTM E 1311 met the lower bound of 6.04E-02 g/cm{sup 3}. The average measured partial boron density of each sample met the lower bound of 1.65E-01 g/cm{sup 3} measured by the ASTM C 1301 method. The average partial hydrogen density of samples 8.5.1, 8.6.3, and 8.7.3 did not meet the lower bound. The samples, as received, were not wrapped in a moist towel as previous samples and appeared to be somewhat drier. This may explain the lower hydrogen partial density with respect to previous samples.

  16. Uranyl nitrate pouring solution for producing nuclear fuel particles and a method for its preparation

    SciTech Connect

    Hein, K.

    1983-05-24

    Sorbitol, or another polyalcohol such as erythritol, dulcitol or xylitol, is added to a solution containing uranyl nitrate which may also contain another heavy metal, such as thorium or plutonium, prior to preneutralization with ammonia in order to provide a highly viscous solution that can be preneutralized to a great extent without premature precipitation of uranium. The high viscosity makes possible the formation of favorably large drops when the solution is dripped into an ammonia containing bath for external gelification of the drops. According to the pouring apparatus used, the particles after washing, drying and sintering have a diameter between 0.6 and 1.5 mm. The polyalcohol is added to a hydrosol containing from 1.5 to 2 moles per liter of heavy metal, the polyalcohol being added until concentration of onethird mole of polyalcohol per mole of heavy metal is reached. In certain cases up to four moles of ammonium nitrate per liter are added. The solution so produced can be preneutralized with up to 90% of the amount of ammonia stoichiometrically necessary for T separation of uranium without the formation of any precipitate, preferably by first adding ammonia gas under strong stirring and then adding ammonium bicarbonate in excess, which decomposes to liberate ammonia to an extent determined by the temperature, which is to be precisely controlled. It is possible to obtain this way a solution of predetermined viscosity from which the excess ammonium bicarbonate can readily be separated.

  17. Letter Report. Defense Waste Processing Facility Pour Spout Heaters - Conceptual Designs and Modeling

    SciTech Connect

    SK Sundaram; JM Perez, Jr.

    2000-09-06

    The Tanks Focus Area (TFA) identified a major task to address performance limitations and deficiencies of the Defense Waste Processing Facility (DWPF) now in its sixth year of operation. Design, installation, testing, monitoring, operability, and a number of other characteristics were studied by research personnel collaboratively at a number of facilities: Savannah River Technology Center (SRTC), Clemson Environmental Technologies Laboratory (CETL), Pacific Northwest National Laboratory (PNNL), and the Idaho National Engineering and Environmental Laboratory (INEEL). Because the potential limiting feature to the DWPF was identified as the pour spout/riser heater, researches on alternative design concepts originally proposed in the past were revisited. In the original works, finite element modeling was performed to evaluate temperature distribution and stress of the design currently used at the DWPF. Studies were also made to define the requirements of the design and to consider the approaches for remote removal/replacement. Their heater type/location, their remotely replaceable thermocouples, and their capabilities for remote handling characterized the five alternative designs proposed. Review comments on the alternative designs indicated a relatively wide range of advantages and disadvantages of the designs. The present report provides an overview of the design criteria, modeling results, and alternative designs. Based on a review of the past design optimization activities and an assessment of recent experience, recommendations are proposed for future consideration and improvement.

  18. Lambeaux autofermants pour le traitement des brulures electriques du scalp par haut voltage

    PubMed Central

    Hafidi, J.; El Mazouz, S.; El Mejatti, H.; Fejjal, N.; Gharib, N.E.; Abbassi, A.; Belmahi, A.M.

    2011-01-01

    Summary Les brûlures électriques par haut voltage sont responsables de gros dégâts tissulaires en immédiat et dans les jours suivant l’accident du fait de la chaleur importante dégagée par effet joule et de la thrombose microvasculaire évolutive. Les pertes de substances du scalp secondaires à ces brûlures nécessitent une couverture par lambeaux vu la destruction du périoste et du calvarium en regard. De juin 1997 à juin 2008, 15 patients ont été traités pour des pertes de substance du scalp secondaires à des brûlures électriques par haut voltage de diamètre allant de 8 à 11 cm et siégeant dans la région tonsurale. Ces patients ont été opérés dans la première semaine suivant l’accident. Les pertes de substance du scalp de taille moyenne secondaires à ces brûlures peuvent être couvertes per primam de façon fiable par des lambeaux locaux axialisés et multiples. Nous relatons l’expérience du Service de Chirurgie Plastique du Centre Hospitalier Universitaire Ibn-Sina, Rabat, Maroc, dans la gestion et la prise en charge de ces brûlures. PMID:22262963

  19. Analysis Of DWPF Sludge Batch 7a (Macrobatch 8) Pour Stream Samples

    SciTech Connect

    Johnson, F. C.; Pareizs, J. M.

    2012-10-24

    The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 7a (SB7a), also referred to as Macrobatch 8 (MB8), in June 2011. SB7a is a blend of the heel of Tank 40 from Sludge Batch 6 (SB6) and the SB7a material that was transferred to Tank 40 from Tank 51. SB7a was processed using Frit 418. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program (GPCP), which is governed by the DWPF Waste Compliance Plan, and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. Three pour stream glass samples and two Melter Feed Tank (MFT) slurry samples were collected while processing SB7a. These additional samples were taken during SB7a to understand the impact of antifoam and the melter bubblers on glass redox chemistry. The samples were transferred to the Savannah River National Laboratory (SRNL) where they were analyzed.

  20. [Monitoring of Curing Temperature of Pouring Explosive Based on Fiber Bragg Grating].

    PubMed

    Zhang, Chen; Wang, Gao; Liang, Hai-jian; Yuan, Jun-ming; Chang, Shuang-jun; Liu, Yu-cun; Wang, Heng-fei; Zhao, Yu

    2015-04-01

    For the first time, we real time measured released reaction heat between the binder and the curing agent in the curing process of cast explosive using fiber Bragg grating. In order to obtain the temperature in the process of pouring explosive casting real time and accurately, we designed the temperature monitoring system based on fiber Bragg grating. Given the risk of explosive component, long curing time and the requirements of constant temperature, a suitable measurement method for direct real-time monitoring has not been found. In recent years, due to its superior characteristics, fiber Bragg grating is widely used in the field of communication and sensing. We will make the collected reflection wavelength to convert real-time temperature displaying, utilizing linear relationship between fiber Bragg grating and temperature. Through WDM technology, seven grating points are written in two optical fibers to measure at the same time, and distribution trend of explosives internal temperature can be displayed in real time by multi-point distributed measurement. The curved design of the sensor not only improves the connection between sensor and jumper, but also benefits to place in oven. The txt data is made to draw a graph using origin software, and the changes in temperature in the curing process are displayed intuitively. The results show that this method is simple and high-precision, and meets the testing requirements of curing temperature of explosives. PMID:26197618

  1. Prise en charge des complications des fistules artério-veineuses pour hémodialyse chronique

    PubMed Central

    Jiber, Hamid; Zrihni, Youssef; Zaghloul, Rachid; Hajji, Rita; Zizi, Othman; Bouarhroum, Abdellatif

    2015-01-01

    La fistule artério-veineuse native est l'accès vasculaire de choix pour l'hémodialyse chronique en raison de sa longévité, son taux faible de complication et de mortalité par rapport aux pontages artério-veineux et aux cathéters. Cependant, il arrive assez souvent que l'on assiste à des complications qui sont dominées par la sténose et la thrombose. C'est une étude rétrospective des complications ayants survenues pour 31 fistules artério-veineuses pour hémodialyse chronique des 200 fistules réalisées chez 200 patients au sein du service de chirurgie vasculaire du CHU Hassan II de Fès sur une période de trois ans, étendue de Janvier 2007 à Décembre 2009. Ces complications ont été présentés par les thromboses dans 14 cas soit 45,15% de l'ensemble des complications, les sténoses dans 4 cas (12,90%,) les anévrismes dans 4 cas (12,90%), les complications ischémiques dans 3 cas (9,67%), l'infection dans 3 cas (9,67%), l'hémorragie dans 2 cas (6,45%) et l’ hyperdébit dans un seul cas soit 3,22%. On a pu conserver 22 fistules soit 70,96% par traitement chirurgical ou endovasculaire, on a confectionné une nouvelle fistule dans 8 cas soit 25,80%, et on a adressé une patiente (3,22%) pour pose d'un cathéter veineux tunnelisé permanent. Les complications des fistules artério-veineuses pour l'hémodialyse chronique sont la principale cause de morbidité chez les patients hémodialysés, il est donc important de s'impliquer lors de leur création, et de donner un maximum d'attention quand ils sont manipulés. Ceci suggère la mise en place d'un programme de surveillance de ces fistules en raison de l'impact des complications sur la morbi-mortalité du patient hémodialysé et sur le plan financier. PMID:26113933

  2. The efficacy and plasma profiles of abamectin plus levamisole combination anthelmintics administered as oral and pour-on formulations to cattle.

    PubMed

    Leathwick, D M; Miller, C M; Sauermann, C W; Candy, P M; Ganesh, S; Fraser, K; Waghorn, T S

    2016-08-30

    In phase I, faecal egg count reduction tests (FECRT) were conducted on six commercial cattle farms to compare the performance of two pour-on and one oral combination anthelmintic. Groups of 12-15 calves were sampled for faecal nematode egg count (FEC) before treatment with either abamectin oral, levamisole oral, an abamectin+levamisole oral combination or one of two abamectin+levamisole combination pour-ons. Samples were collected again 14days after treatment to calculate the percentage reduction in FEC. The proportions of infective stage larvae (L3) in faecal cultures were used to apportion egg counts to, and calculate efficacy against, the main parasite genera. Abamectin oral was effective against Ostertagia except on one farm where resistance was indicated, but had reduced efficacy against Cooperia on four farms. Levamisole oral was effective against Cooperia on all farms, but had variable efficacy against Ostertagia. The abamectin+levamisole oral was effective against both species on all farms. The abamectin+levamisole pour-ons were effective on some farms but not on others. In particular, pour-on 2 failed to achieve 95% efficacy in 45% of evaluations, 4/6 against Cooperia and 1/5 against Ostertagia. On some farms the combination pour-ons were less effective than their constituent actives administered alone as orals. In phase II, 8 groups of 6 calves, grazing parasite-free pasture, were infected with putatively ML-resistant isolates of Cooperia oncophora and Ostertagia ostertagi. Once infections were patent groups were treated with oral or pour-on formulations of abamectin alone, levamisole alone, abamectin+levamisole (two pour-ons) or remained untreated. Blood samples were collected for analysis and after 8days all calves were euthanized and abomasa and intestines recovered for worm counts. All treatments were effective against O. ostertagi and all treatments containing levamisole were effective against C. oncophora. Animals treated with the oral combination

  3. Analysis of Sludge Batch 3 (Macrobatch4) DWPF Pour Stream Glass Sample for Canister s02312

    SciTech Connect

    Bannochie, C

    2005-09-01

    The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 3 (SB3), Macrobatch 4 (MB4) in March 2004 as part of Sludge Receipt and Adjustment Tank (SRAT) Batch 272. Sludge Batch 3 is a blend of the contents Tank 40 remaining from Sludge Batch 2 (SB2), the sludge that was transferred to Tank 40 from Tank 51 and Canyon Np solution additions made directly to Tank 40. The sludge transferred from Tank 51 contained sludges from Tanks 7, 18 and 19 along with precipitated solutions of U, Pu/Gd and Am/Cm from the F and H Canyons. The blend of sludge from Tank 51, Tank 40, and the Canyon additions defines SB3 (or MB4). The sludge slurry is received into the DWPF Chemical Processing Cell (CPC) and is processed through the SRAT and Slurry Mix Evaporator (SME) Tank and fed to the melter. During the processing of each sludge batch, the DWPF is required to take at least one glass sample. This glass sample is taken to meet the objectives of the Glass Product Control Program and complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. Two glass samples were obtained while pouring Canisters S02312 and S02315 which were sent to the Savannah River National Laboratory's (SRNL) Shielded Cells Facility. Sample S02312 was designated for analysis, while sample S02315 was designated for archival storage. This report contains the visual observations of the as-received glass sample, results for the density, chemical composition, the Product Consistency Test (PCT) and the calculated and measured radionuclide results needed for the Production Record for Canister S02312. The following conclusions were drawn from the examination of this DWPF pour stream glass sample: (1) The glass sample taken during the filling of DWPF Canister S02312 weighed 41.69 g and was generally dark and reflective. (2) Minor inclusions, on the order of 1 {micro}m in size, of noble metals were seen in the glass via contained scanning electron

  4. Pertinence de l'implantation de la filiere granule de bois pour le Quebec

    NASA Astrophysics Data System (ADS)

    Tremblay, Stephan

    Les spécialistes avancent que le marché mondial de l'énergie en forte demande et en offre limitée nécessitera bientôt toutes les formes d'énergie disponibles. Le granulé de bois est une forme de bioénergie principalement utilisée pour le chauffage des bâtiments et pourrait être davantage considéré dans l'offre énergétique du Québec. Comme le Québec est un territoire où il fait froid et donc susceptible de pouvoir se tourner vers cette forme d'énergie, l'objectif de ce mémoire est d'en analyser les avantages. Pour ce faire, nous commencerons par démontrer la croissance des besoins énergétiques sur les plans national et international et dresser un portrait des différentes formes d'énergies consommées au Québec. Puisque la majorité des Québécois chauffent leurs bâtiments à l'hydroélectricité, nous analyserons à travers le plan d'approvisionnement d'Hydro-Québec le portrait de la production et de la consommation de cette forme d'énergie renouvelable. Cela nous permettra de constater le défi face à la gestion de surplus importants, sauf pendant la période hivernale, et ce faisant, l'obligation de la société d'État d'utiliser davantage ses centrales au gaz ou de se tourner vers l'importation de l'électricité. Dans la même lignée, un regard sera porté sur les perspectives d'utilisation de l'hydroélectricité sur les plans de la production d'aluminium, de l'exportation et de l'utilisation dans l'électrification des transports au Québec. Cette analyse se fera dans l'objectif de s'interroger sur la pertinence d'utiliser cette source d'énergie dans le chauffage plutôt que dans des secteurs plus créateurs de richesse. Nous poserons ensuite l'hypothèse que le granulé de bois pourrait être un bon substitut à une autre forme d'énergie utilisée dans le chauffage, soit le mazout. Avant de dresser un portrait de ce combustible fossile, nous ferons celui de la production et de la consommation de granulés sur les plans r

  5. Systeme microfluidique d'analyse sanguine en temps reel pour l'imagerie moleculaire chez le petit animal

    NASA Astrophysics Data System (ADS)

    Convert, Laurence

    De nouveaux radiotraceurs sont continuellement développés pour améliorer l'efficacité diagnostique en imagerie moléculaire, principalement en tomographie d'émission par positrons (TEP) et en tomographie d'émission monophotonique (TEM) dans les domaines de l'oncologie, de la cardiologie et de la neurologie. Avant de pouvoir être utilisés chez les humains, ces radiotraceurs doivent être caractérisés chez les petits animaux, principalement les rats et les souris. Pour cela, de nombreux échantillons sanguins doivent être prélevés et analysés (mesure de radioactivité, séparation de plasma, séparation d'espèces chimiques), ce qui représente un défi majeur chez les rongeurs à cause de leur très faible volume sanguin (˜1,4 ml pour une souris). Des solutions fournissant une analyse partielle sont présentées dans la littérature, mais aucune ne permet d'effectuer toutes les opérations dans un même système. Les présents travaux de recherche s'insèrent dans le contexte global d'un projet visant à développer un système microfluidique d'analyse sanguine complète en temps réel pour la caractérisation des nouveaux radiotraceurs TEP et TEM. Un cahier des charges a tout d'abord été établi et a permis de fixer des critères quantitatifs et qualitatifs à respecter pour chacune des fonctions de la puce. La fonction de détection microfluidique a ensuite été développée. Un état de l'art des travaux ayant déjà combiné la microfluidique et la détection de radioactivité a permis de souligner qu'aucune solution existante ne répondait aux critères du projet. Parmi les différentes technologies disponibles, des microcanaux en résine KMPR fabriqués sur des détecteurs semiconducteurs de type p-i-n ont été identifiés comme une solution technologique pour le projet. Des détecteurs p-i-n ont ensuite été fabriqués en utilisant un procédé standard. Les performances encourageantes obtenues ont mené à initier un projet de ma

  6. Gestion des ressources hydriques adaptee aux changements climatiques pour la production optimale d'hydroelectricite. Etude de cas: Bassin versant de la riviere Manicouagan

    NASA Astrophysics Data System (ADS)

    Haguma, Didier

    Il est dorenavant etabli que les changements climatiques auront des repercussions sur les ressources en eau. La situation est preoccupante pour le secteur de production d'energie hydroelectrique, car l'eau constitue le moteur pour generer cette forme d'energie. Il sera important d'adapter les regles de gestion et/ou les installations des systemes hydriques, afin de minimiser les impacts negatifs et/ou pour capitaliser sur les retombees positives que les changements climatiques pourront apporter. Les travaux de la presente recherche s'interessent au developpement d'une methode de gestion des systemes hydriques qui tient compte des projections climatiques pour mieux anticiper les impacts de l'evolution du climat sur la production d'hydroelectricite et d'etablir des strategies d'adaptation aux changements climatiques. Le domaine d'etude est le bassin versant de la riviere Manicouagan situe dans la partie centrale du Quebec. Une nouvelle approche d'optimisation des ressources hydriques dans le contexte des changements climatiques est proposee. L'approche traite le probleme de la saisonnalite et de la non-stationnarite du climat d'une maniere explicite pour representer l'incertitude rattachee a un ensemble des projections climatiques. Cette approche permet d'integrer les projections climatiques dans le probleme d'optimisation des ressources en eau pour une gestion a long terme des systemes hydriques et de developper des strategies d'adaptation de ces systemes aux changements climatiques. Les resultats montrent que les impacts des changements climatiques sur le regime hydrologique du bassin de la riviere Manicouagan seraient le devancement et l'attenuation de la crue printaniere et l'augmentation du volume annuel d'apports. L'adaptation des regles de gestion du systeme hydrique engendrerait une hausse de la production hydroelectrique. Neanmoins, une perte de la performance des installations existantes du systeme hydrique serait observee a cause de l'augmentation des

  7. Utilisation de la mélatonine pour le sommeil chez les enfants en bonne santé

    PubMed Central

    Janjua, Irvin; Goldman, Ran D.

    2016-01-01

    Résumé Question Une maman a amené son garçon de 12 ans me consulter à mon bureau. Elle s’inquiète, car il a de la difficulté à s’endormir presque tous les soirs. Elle travaille par quarts et elle prend elle-même de la mélatonine pour l’aider à s’endormir. Elle m’a demandé si son garçon pouvait aussi prendre de la mélatonine. Quels sont les recommandations et les éléments à considérer avant d’utiliser la mélatonine chez les enfants et les adolescents en bonne santé? Réponse L’insomnie est rapportée chez jusqu’à un quart des enfants en bonne santé et chez les trois quarts des enfants atteints d’une affection psychiatrique ou neurodéveloppementale, ce qui entraîne des conséquences négatives. Pour les enfants atteints du syndrome de retard de phase du sommeil, la mélatonine pourrait s’avérer utile lorsque jumelée à une évaluation de l’insomnie et à un suivi régulier. La mélatonine pourrait être envisagée pour des enfants sans diagnostic d’insomnie qui ont une bonne hygiène du sommeil. Bien qu’elle semble sans danger, il n’existe pas de données probantes en faveur de l’emploi systématique de la mélatonine chez les enfants en bonne santé.

  8. Guides d'ondes infrarouges pour applications en télécommunications, capteurs chimiques et biochimiques

    NASA Astrophysics Data System (ADS)

    Smektala, F.; Bureau, B.; Adam, J. L.; Lucas, J.

    2002-06-01

    Les énergies de phonons élevés des verres à base de silice limitent leurs applications dans l'infrarouge. Il devient donc incontournable de créer des verres à plus faible énergie de phonons pour développer une optique passive guidée opérationnelle dans l'IR moyen et pour réaliser de nouveaux guide d'ondes optiques activés par des lanthanides pouvant jouer le rôle soit d'amplificateurs optiques soit de fibres lasers. Les compositions de verres stables répondant à ces critères sont exceptionnelles et appartiennent aux familles chimiques des fluorures et des chalcogénures. Les verres de fluorures, convenablement dopés par des terres rares, ont permis la réalisation d'amplificateurs optiques opérant dans la fenêtre télecom de la silice (1.3 μm avec le praséodyme, 1.45 μm avec le thulium et 1.55 μm avec l'erbium. Les verres de chalcogénures permettent la réalisation de fibres opérationnelles jusqu'à 12 μm mais seulement pour des applications courtes distances telles que le transport d'énergie moyenne, la radiométrie à l'ambiante et la spectrométrie IR déportée par fibre optique de molécules chimiques ou de tissus biologiques.

  9. [Eradication of Chorioptes bovis mange in a dairy herd with turn-out to graze by Eprinex Pour-On].

    PubMed

    Schönberg, J; Ilchmann, G; Schein, E

    2000-04-01

    The possibility to control or even eradicate chorioptes manage by a single herd treatment with EPRINEX Pour-On (dosage: 0.5 mg Eprinomection/kg bodyweight) during pasture season was investigated in a dairy herd of 320 dairy cows. A further aim of the study was to evaluate whether such mid-summer treatment with EPRINEX Pour-On due to its endo-ectocide action would at the same time also result in a metaphylaxis of gastro-intestinal and lung worms and in a reduction of fly infestation. Due to clinical symptoms manage prevalence in the herd prior to treatment was 11 percent. After treatment, clinical symptoms disappeared within 2 months completely and did not re-occur during the subsequent housing period. Chorioptes mites during the entire trial period no longer were detected. The final clinical and parasitological investigation shortly before turn-out the next year (April 1999) demonstrated chorioptes mange to be eradicated clinically and parasitologically. Due to the mid-summer treatment infestation with gastrointestinal helminths also was eliminated and clinical symptoms of helminth infestations during the pasture season no longer were observed. However, at housing in November, low numbers of eggs of gastrointestinal nematodes were detected in 6% of dairy cows, 32% of second-season and 63% of first-season heifers, respectively. Milk yield per cow and day on average increased by 1 litre after treatment with EPRINEX Pour-On. This increase in production is likely a result of the reduction in total parasite burden of lactating cows. PMID:10816914

  10. Interdiffusion de puits quantiques controlee par irradiation laser excimere pour l'integration de composants photoniques

    NASA Astrophysics Data System (ADS)

    Genest, Jonathan

    L'integration de composants discrets sur un systeme unique, tel une puce electronique, augmente les performances totales du systeme, fait apparaitre de nouvelles fonctionnalites et diminue les couts associes a la fabrication des dispositifs. Ces ameliorations, appliquees au secteur de la microelectronique, sont grandement responsables des avancements importants qu'ont connus les technologies de l'information et des communications au cours des dernieres annees. Puisque la fabrication de circuits photoniques integres necessite l'integration de structures ayant des bandes interdites differentes a partir d'une meme puce semiconductrice, leur niveau d'integration est bien inferieur que celui atteint pour un microprocesseur standard. Parmi les techniques ayant le potentiel de fabriquer des circuits photoniques integres monolithiquement, l'interdiffusion de puits quantique post-expitaxial controlee spatialement augmente la bande interdite d'une heterostructure semiconductrice a l'interieur de regions definies. Le processus d'interdiffusion, active thermiquement, est accelere par la diffusion d'impuretes et de defauts ponctuels tels que les lacunes et les interstitiels. L'hypothese de depart de mes travaux de doctorat suppose que la radiation laser ultra-violette module la diffusion et la generation de defauts ponctuels dans les heterostructures reposant sur les technologies a base de GaAs et d'InP et, consequemment, controle spatialement l'interdiffusion de puits quantiques. Nous avons demontre que lorsque appliquee sur des heterostructures a base de GaAs, l'irradiation laser excimere l'interdiffusion en favorisant la croissance d'un stresseur de surface qui empeche la diffusion des defauts ponctuels vers les puits quantiques. Nous avons souligne l'influence de la vapeur d'eau physisorbee sur la croissance du stresseur et avons determine la resolution spatiale de la technique. Dans les heterostructures basees sur les technologies InP, meme sous le seuil d'ablation, l

  11. Developpement d'un vibrateur acoustique pour precipiter les defauts latents de circuits electroniques

    NASA Astrophysics Data System (ADS)

    Lafleur, Francois

    2003-08-01

    Le procede de deverminage, ou Environmental Stress Screening (ESS), est employe principalement dans le domaine de l'electronique pour reduire les mortalites infantiles des produits avant leur livraison. Il utilise usuellement des stimulations environnementales telles que les vibrations ou la temperature produites a l'aide d'equipements conventionnels d'essais qui sont tres couteux et difficiles a implanter. Le but de cette recherche est le developpement d'une nouvelle methode d'excitation vibratoire des plaques de circuits electroniques a moindre cout par l'emploi de l'excitation acoustique. Le projet a mene au developpement d'un vibrateur acoustique pouvant etre utilise lors d'implantations du procede ESS en milieu industriel. L'utilisation de cette nouvelle technologie et des methodes novatrices de personnalisation des spectres ESS proposees dans cette these permettent la precipitation de defaillances latentes presentes dans les produits electroniques de facon efficace et securitaire et ce, a moindre cout par rapport aux technologies concurrentes. La methodologie des travaux presentes dans cette these inclus: (1) La generation acoustique des vibrations sur les circuits; (2) L'analyse modale acoustique des circuits par des methodes a reference unique et a references multiples; (3) La precipitation de defauts latents typiques des circuits electroniques; (4) Une methode d'individualisation des spectres vibratoires tenant compte des caracteristiques structurelles des circuits; (5) La presentation de la configuration de l'equipement acoustique et les resultats d'implantation du procede. Nonobstant la fabrication, l'installation et la mise en service d'un equipement en milieu industriel (depuis le mois de mai 2002), ces travaux ont permis l'obtention de trois familles de brevets et la publication de six articles de conference: trois portant sur l'analyse modale a reference unique, un portant sur l'analyse modale a references multiples, un autre portant sur la

  12. Développement d'outils de mesure pour l'amélioration du procédé d'impression offset

    NASA Astrophysics Data System (ADS)

    Boumaïza, K.; Baudin, G.; Catusse, R.; Viallet, A.

    1999-03-01

    The offset printing process rests primarily on the balance between ink and damping solution. However, this balance remains difficult to realize. The corresponding wastes of time and into consumable (ink, paper and damping solution) are harmful for the industrialist, the consumer and the environment. The main feature of this work is to control and thus to optimize these flux. With this intention, two optical sensors functioning in reflection were developed. A laser with receiving photodiode for the control of damping solution film thickness, and an optical fiber related to a photoelectric sensor for control of ink film thickness. The current study aims at the calibration of these two sensors for respectively the control of water and ink flux in the offset press. Le procédé d'impression offset repose essentiellement sur l'équilibre entre la solution de mouillage et l'encre. Toutefois, cet équilibre reste une tâche difficile à réaliser. Les pertes en temps et en consommables (encre, papier, solution de mouillage) correspondantes sont nuisibles à la fois pour l'industriel, le consommateur et l'environnement. L'objectif de ce travail est de contrôler et donc d'optimiser ces flux pour un tirage donné. Pour ce faire, deux capteurs de type optique fonctionnant en réflexion ont été développés. Un laser avec photodiode réceptrice pour le contrôle du film de solution de mouillage, et une fibre optique liée à un capteur photoélectrique pour le contrôle du film d'encre. L'étude actuelle vise la mise en ouvre et l'étalonnage de ces deux capteurs pour la mesure et le contrôle des films respectifs d'eau et d'encre dans la presse offset.

  13. SUMMARY REPORT FOR THE ANALYSIS OF THE SLUDGE BATCH 6 (MACROBATCH 7) DWPF POUR STREAM GLASS SAMPLE FOR CANISTER S03472

    SciTech Connect

    Johnson, F.

    2012-01-23

    In order to comply with the Waste Acceptance Specifications in Sludge Batch 6 (Macrobatch 7), Savannah River National Laboratory personnel performed characterization analyses on the Defense Waste Processing Facility (DWPF) pour stream glass sample collected while filling canister S03472. This report summarizes results of the characterization, which indicate that the DWPF produced glass that is significantly more durable than the Environmental Assessment glass. Results and further details are documented in 'Analysis of DWPF Sludge Batch 6 (Macrobatch 7) Pour Stream Glass Samples,' SRNL-STI-2011-00555.

  14. SUMMARY REPORT FOR THE ANALYSIS OF THE SLUDGE BATCH 7A (MACROBATCH 8) DWPF POUR STREAM GLASS SAMPLE FOR CANISTER S03619

    SciTech Connect

    Johnson, F.

    2012-05-01

    In order to comply with the Waste Acceptance Specifications in Sludge Batch 7a (Macrobatch 8), Savannah River National Laboratory personnel characterized the Defense Waste Processing Facility (DWPF) pour stream glass sample collected while filling canister S03619. This report summarizes the results of the compositional analysis for reportable oxides and radionuclides, and the normalized Product Consistency Test (PCT) results. The PCT responses indicate that the DWPF produced glass that is significantly more durable than the Environmental Assessment glass. Results and further details are documented in 'Analysis of DWPF Sludge Batch 7a (Macrobatch 8) Pour Stream Samples,' SRNL-STI-2012-00017.

  15. Cinétique de la troponine Ic et valeurs seuils pour le diagnostic d'infarctus du myocarde après chirurgie cardiaque sous circulation extracorporelle

    PubMed Central

    Kallel, Samy; Jarraya, Anwar; Ellouze, Maged; Frikha, Imed; Karoui, Abbdelhamid

    2012-01-01

    Introduction L'objectif de ce travail était d’étudier la cinétique de la Troponine Ic (TnIc) après chirurgie cardiaque sous circulation extracorporelle (CEC) et établir des valeurs seuils de TnIc pour le diagnostic d'infarctus du myocarde (IDM) post opératoire. Il s'agissait d'une étude prospective type cohorte observationnelle. Méthodes Nous avons inclus 37 patients âgés de plus de 18 ans proposés pour chirurgie valvulaire ou pontage aorto coronarien sous CEC. Nous avons suivi la cinétique de TnIc par des dosages immunoenzymatique sur mini-vidas® avant et après la CEC, à H4 et H12 postopératoire puis tous les jours les 4 premiers jours. Le cutoff pour le diagnostic d'IDM post opératoire a été défini comme la valeur moyenne de troponine + deux déviations standards des patients indemnes de complications cardiaques. Résultats Les valeurs de TnIc en préopératoire étaient toutes inférieures au seuil de détection de la méthode de dosage (<0,01µg/l). Les valeurs de TnIc augmentent en postopératoire immédiat pour atteindre un maximum à H4 puis diminuent progressivement pour se normaliser après 4 à 5 jours. Les valeurs seuils ont été déterminées pour H0, H4,H12, H24, H48, H72, H96 et ont été respectivement 1.36, 2.58, 3.1, 3.23, 2.13, 1.53, 1.17 pour la chirurgie coronaire et 3.75, 5.39, 4.22, 3.41, 1.65, 1.3 1.19 pour la chirurgie valvulaire. Conclusion La connaissance de la cinétique de TnIc lors de chirurgie cardiaque non compliquée et la fixation de valeur seuil ou Cutoff permet aux cliniciens de distinguer entre dommage myocardique secondaire à la chirurgie et IDM. PMID:23396754

  16. Spectroscopie VUV sub-picoseconde : un détecteur haute cadence et un monochromateur pour impulsions femtosecondes

    NASA Astrophysics Data System (ADS)

    Martin, P.; Belsky, A.; Zinin, E.; Philippov, A.; Idir, M.; Moreno, T.; Darpentigny, G.; Salin, F.

    2003-06-01

    La très faible durée des impulsions harmoniques VUV est incompatible avec les systèmes dispersifs “classiques” existant comme les monochromateurs VUV utilisés actuellement, principalement auprès des sources de rayonnement synchrotron. Nous avons conçu un monochromateur VUV (domaine spectral: visible-30nm, 4-40eV) capable de fonctionner sans dispersion temporelle d'impulsions de quelques dizaines de fs. Son principe est basé sur l'utilisation de deux réseaux fonctionnant dans des ordres opposés en configuration optique de type Seya-Namioka, avec des optiques toriques pour la pré et post focalisation. Compte tenu des contraintes imposées le pouvoir de résolution attendu (environ 100) est suffisant pour des applications en spectroscopie VUV. Dans le cadre de cette thématique développée au CELIA et plus particulièrement en ce qui concerne l'aspect dynamique de la relaxation électronique, nous présentons ici également un détecteur de photons de grande sensibilité appelé “dissecteur” dont la résolution actuelle est d'environ 13ps mais qui sera prochainement portée à 1ps.

  17. A Novel Methodology for the Synthesis of Acyloxy Castor Polyol Esters: Low Pour Point Lubricant Base Stocks.

    PubMed

    Kamalakar, Kotte; Mahesh, Goli; Prasad, Rachapudi B N; Karuna, Mallampalli S L

    2015-01-01

    Castor oil, a non-edible oil containing hydroxyl fatty acid, ricinoleic acid (89.3 %) was chemically modified employing a two step procedure. The first step involved acylation (C(2)-C(6) alkanoic anhydrides) of -OH functionality employing a green catalyst, Kieselguhr-G and solvent free medium. The catalyst after reaction was filtered and reused several times without loss in activity. The second step is esterification of acylated castor fatty acids with branched mono alcohol, 2-ethylhexanol and polyols namely neopentyl glycol (NPG), trimethylolpropane (TMP) and pentaerythritol (PE) to obtain 16 novel base stocks. The base stocks when evaluated for different lubricant properties have shown very low pour points (-30 to -45°C) and broad viscosity ranges 20.27 cSt to 370.73 cSt, higher viscosity indices (144-171), good thermal and oxidative stabilities, and high weld load capacities suitable for multi-range industrial applications such as hydraulic fluids, metal working fluids, gear oil, forging and aviation applications. The study revealed that acylated branched mono- and polyol esters rich in monounsaturation is desirable for developing low pour point base stocks. PMID:26582154

  18. Analyse de la motivation pour les mathematiques d'eleves du secondaire participant a une activite de programmation informatique

    NASA Astrophysics Data System (ADS)

    Ouellette, Jean-Michel

    Au Quebec, le decrochage scolaire cause par un manque de motivation de la part des eleves est une preoccupation actuelle. Dans une societe de savoirs ou les technologies prennent une place de plus en plus grande, il apparait important d'explorer toutes les pistes de travail quant a l'amelioration de la motivation scolaire des jeunes. Plus precisement, sachant qu'il existe des liens concrets entre la programmation informatique et les mathematiques, nous avons analyse l'apport possible de l'apprentissage de la programmation informatique a la motivation pour l'apprentissage des mathematiques. Trois eleves de troisieme secondaire ont participe a cette etude multicas. Selon les resultats d'analyse, tous les eleves ont vecu une amelioration de leur motivation a apprendre les mathematiques. A la lumiere de l'analyse de ces resultats, nous proposons une explication relativement aux liens possibles entre la participation des eleves a une activite parascolaire de programmation informatique et l'amelioration de leur motivation pour l'apprentissage des mathematiques.

  19. A New Direct-Pour In-Mold (DPI) Technology for Producing Ductile and Compacted Graphite Iron Castings.

    SciTech Connect

    Jason Hitchings; Jay R. Hitchings

    2007-07-20

    A new "Direct Pour In-Mold" (DPI) Magnesium treatment technology has been developed that can produce both Nodular and Compacted Graphite iron. The DPI technology converts the standard horizontal runner system into a vertical one, by placing a Magnesium Ferrosilicon treatment alloy and molten metal filter into a specially designed container. The DPI container is easily placed into either vertically or horizontally parted molds, and then a base metal can be poured directly into it. The metal is treated and filtered as it passes through, and then proceeds directly into a runner or casting cavity. Various sizes of containers provide all of the necessary components required to deliver a range of weights of treated and filtered metal at accurate and consistent flow rates. The DPI containers provide energy savings over competing techniques, increased mold yields, very high Magnesium recovery, zero Magnesium fume, and no post inoculation is required. By treating the metal just prior to it entering a casting cavity many other benefits and advantages are also realized.

  20. Prescrire du cannabis fumé pour la douleur chronique non cancéreuse

    PubMed Central

    Kahan, Meldon; Srivastava, Anita; Spithoff, Sheryl; Bromley, Lisa

    2014-01-01

    Résumé Objectif Offrir des conseils préliminaires sur la prescription de cannabis fumé pour la douleur chronique avant la publication de lignes directrices officielles. Qualité des données Nous avons examiné les ouvrages scientifiques sur l’efficacité analgésique du cannabis fumé et les dommages causés par la consommation de cannabis à des fins médicales et récréatives. Nous avons élaboré des recommandations concernant les indications et les contre-indications du cannabis fumé, les précautions à prendre et son dosage et nous avons classé les recommandations en fonction du niveau des données probantes. La plupart des données probantes sont de niveau II (études observationnelles bien effectuées) et de niveau III (opinion d’experts). Message principal Le cannabis fumé pourrait être indiqué chez des patients souffrant de douleurs neuropathiques sévères qui n’ont pas répondu à des essais suffisants de cannabinoïdes pharmaceutiques et d’analgésiques standards (données probantes de niveau II). Le cannabis fumé est contre-indiqué chez les patients de 25 ans ou moins (données probantes de niveau II); ceux qui font actuellement ou ont fait par le passé une psychose ou encore ont de forts antécédents familiaux de psychose (données probantes de niveau II); ceux qui ont ou ont eu un problème de consommation de cannabis (données probantes de niveau III); ceux qui ont un problème actuel de toxicomanie ou d’alcoolisme (données probantes de niveau III); ceux qui ont une maladie cardiovasculaire ou respiratoire (données probantes de niveau III); ou celles qui sont enceintes ou planifient une grossesse (données probantes de niveau II). Il devrait être utilisé avec précaution par les patients qui fument du tabac (données probantes de niveau II), qui sont à risque accru de maladies cardiovasculaires (données probantes de niveau III), qui ont des troubles d’anxiété ou de l’humeur (données probantes de niveau II) ou

  1. Développement expérimental d'une ligne PIXE-XRF pour les matériaux du patrimoine

    NASA Astrophysics Data System (ADS)

    Bertrand, L.; Calligaro, T.; Dran, J.-C.; Dubus, M.; Guerra, M. F.; Moignard, B.; Pichon, L.; Salomon, J.; Walter, P.

    2002-07-01

    L'analyse élémentaire d'objets d'art ou d'archéologie exige l'emploi de méthodes non destructives possédant une sensibilité suffisante- pour les éléments traces. La méthode PIXE (acronyme pour Particle Induced X-ray Emission) satisfait à cette condition tout en se heurtant à deux contraintes majeures : le risque de détérioration de matériaux sensibles tels que les matériaux organiques et la faible sensibilité pour l'analyse d'impuretés légères dans les matrices lourdes. Nous avons développé une nouvelle ligne expérimentale sur l'accélérateur de particules du Centre de recherche et de restauration des musées de France, permettant de s'affranchir de ces deux limitations en recourant à une variante de la fluorescence des rayons X, dénommée PIXE-XRF (XRF pour X-Ray Fluorescence). L'extraction à l'air du faisceau permet une souplesse du dispositif nettement améliorée.

  2. U Modele pour L'enregistrement et L'interpretation Physique D'images Tridimensionnelles EN Couleur

    NASA Astrophysics Data System (ADS)

    Baribeau, Rejean

    Le modele propose dans cette these repose sur l'utilisation d'un capteur de vision tridimensionnelle, couple a un laser RGB, pour la saisie des coordonnees surfaciques d'un objet de meme que des couleurs associees. Une calibration du capteur et l'exploitation des donnees 3D permettent la recuperation des facteurs de reflectance spectrale des elements de surface. On montre que la performance du systeme est limitee par le speckle, et une analyse quantitative du phenomene est proposee. Divers modeles de reflexion sont ensuite etablis puis appliques a l'extraction des parametres physiques intrinseques d'objets dans des scenes 3D en couleur. Une telle modelisation physique facilite la tache d'interpretation et permet plus de souplesse dans la manipulation des objets sous forme de realites virtuelles.

  3. Study of Melt Thermal-Rate Treatment and Low-Temperature Pouring on Al-15%Si Alloy

    NASA Astrophysics Data System (ADS)

    Wang, Qinglei; Zhang, Shuo; Zhang, Zhenwei; Yan, Xingchen; Geng, Haoran

    2013-08-01

    Under the condition of melt thermal-rate treatment (MTRT) and low-temperature pouring (LTP), the tensile properties of Al-15%Si alloy are improved, the average size of primary Si is refined to about 20 μm from about 50 μm, and eutectic silicon can be well modified. The ultimate tensile strength and elongation are 201 MPa and 3.5%, and these values increase by 12% and 25%, respectively, compared with that obtained by conventional casting technique. The Al-15%Si alloy modified with Sr and RE additions was also studied for comparison purposes. The tensile properties of the Al-15%Si alloy treated with MTRT + LTP are superior to those modified with Sr or RE addition individually. The eutectic growth temperature difference between modified and unmodified melts was used to indicate the modification level. The modification effect of MTRT + LTP on Al-15%Si alloy is better than that modified with Sr or RE addition.

  4. Appendicite aigue non compliquée: y a-t- il une place pour le traitement conservateur

    PubMed Central

    El Khader, Ahmed; Lahkim, Mohamed; El Barni, Rachid; Achour, Abdessamad

    2015-01-01

    Le but de cette étude a été d’évaluer l'efficacité de l'antibiothérapie seule dans le traitement des appendicites aigues non compliquées. C'est une étude prospective, intéressant 68 patients ayant eu une appendicite aigue simple, de confirmation radiologique, traités par l'amoxicilline associée à l'acide clavulanique pendant 10 jours. L'appendicectomie a été réalisée en cas d'aggravation ou en cas de non amélioration au bout de 48heures de traitement. Le traitement conservateur a été efficace dans 82,35% avec une résolution complète des symptômes chez 56 patients. Les 12 cas restants (17,65%) ont subit une appendicectomie. l'appendicite a été gangréneuse dans 8 cas et phlegmoneuse dans 4 cas. Cinq des 56 patients, qui ont bien évolué sous traitement conservateur, ont été réadmis et opérés pour récidive, soit 8,9%. Deux cas ont eu une appendicite compliquée. L'appendicectomie reste le traitement de référence pour l'appendicite aigue, mais le traitement antibiotique peut être proposé en première intension à des patients présentant une appendicite aigue non compliquée. PMID:26327981

  5. Approche en soins primaires pour les problèmes de consommation de cannabis

    PubMed Central

    Turner, Suzanne D.; Spithoff, Sheryl; Kahan, Meldon

    2014-01-01

    Résumé Objectif Étudier les caractéristiques et complications cliniques de la consommation à risque de cannabis et du trouble de consommation de cannabis, et présenter un protocole en cabinet pour le dépistage, l’identification et la prise en charge de ces problèmes. Sources des données Une recherche des essais contrôlés, des études d’observation et des révisions sur l’usage de cannabis par les adolescents et les jeunes adultes; les méfaits psychiatriques et médicaux liés au cannabis; le trouble de consommation de cannabis et son traitement; et les lignes directrices sur la consommation à faible risque de cannabis a été effectuée dans PubMed. Message principal Les médecins doivent questionner tous leurs patients quant à leur usage de cannabis. Ils doivent questionner plus souvent les adolescents et jeunes adultes de même que les personnes qui présentent un risque élevé de problèmes liés au cannabis (qui ont un trouble psychiatrique ou de consommation de drogue concomitant). Les problèmes pouvant être causés par le cannabis, comme les troubles de l’humeur, la psychose et les symptômes respiratoires, devraient susciter des questions sur la consommation de cannabis. Aux patients qui rapportent un usage de cannabis, les médecins devraient poser des questions sur la fréquence et la quantité consommée, la présence de symptômes de tolérance ou de sevrage, les tentatives de réduire leur consommation et la présence de problèmes liés au cannabis. Les usagers à faible risque fument, inhalent ou ingèrent le cannabis occasionnellement sans aucun signe de dysfonctionnement scolaire, professionnel ou social; les personnes dont l’usage est problématique consomment tous les jours ou presque tous les jours, ont de la difficulté à réduire leur consommation et leur fonctionnement scolaire, professionnel et social est perturbé. Les médecins devraient offrir à tous les patients dont l’usage est problématique des conseils

  6. Revetements antireflet-passivation a base de nitrure de silicium PECVD pour cellules solaires triple-jonction III-V/ Ge

    NASA Astrophysics Data System (ADS)

    Homier, Ram

    Dans le contexte environnemental actuel, le photovoltaïque bénéficie de l'augmentation des efforts de recherche dans le domaine des énergies renouvelables. Pour réduire le coût de la production d'électricité par conversion directe de l'énergie lumineuse en électricité, le photovoltaïque concentré est intéressant. Le principe est de concentrer une grande quantité d'énergie lumineuse sur des petites surfaces de cellules solaires multi-jonction à haute efficacité. Lors de la fabrication d'une cellule solaire, il est essentiel d'inclure une méthode pour réduire la réflexion de la lumière à la surface du dispositif. Le design d'un revêtement antireflet (ARC) pour cellules solaires multi-jonction présente des défis à cause de la large bande d'absorption et du besoin d'égaliser le courant produit par chaque sous-cellule. Le nitrure de silicium déposé par PECVD en utilisant des conditions standards est largement utilisé dans l'industrie des cellules solaires à base de silicium. Cependant, ce diélectrique présente de l'absorption dans la plage des courtes longueurs d'onde. Nous proposons l'utilisation du nitrure de silicium déposé par PECVD basse fréquence (LFSiN) optimisé pour avoir un haut indice de réfraction et une faible absorption optique pour l'ARC pour cellules solaires triple-jonction III-V/Ge. Ce matériau peut aussi servir de couche de passivation/encapsulation. Les simulations montrent que l'ARC double couche SiO2/LFSiN peut être très efficace pour réduire les pertes par réflexion dans la plage de longueurs d'onde de la sous-cellule limitante autant pour des cellules solaires triple-jonction limitées par la sous-cellule du haut que pour celles limitées par la sous-cellule du milieu. Nous démontrons aussi que la performance de la structure est robuste par rapport aux fluctuations des paramètres des couches PECVD (épaisseurs, indice de réfraction). Mots-clés : Photovoltaïque concentré (CPV), cellules

  7. Endectocide activity of a pour-on formulation containing 1.5 per cent ivermectin +0.5 per cent abamectin in cattle

    PubMed Central

    Silva, Heloisa Cristina; Prette, Nancy; Lopes, Welber Daniel Zanetti; Sakamoto, Cláudio Alessandro M; Buzzulini, Carolina; dos Santos, Thais Rabelo; Cruz, Breno Cayeiro; Teixeira, Weslen F Pires; Felippelli, Gustavo; Carvalho, Rafael Silveira; Maciel, Willian Giquelin; Soares, Vando Edésio; da Costa, Alvimar José

    2015-01-01

    The present work aimed to evaluate, through ten different studies, the therapeutic efficacy of a new pour-on formulation, containing 1.5 per cent ivermectin +0.5 per cent abamectin, against parasites of cattle. Results obtained on trials against Rhipicephalus (Boophilus) microplus showed that the pour-on combination of 1.5 per cent ivermectin +0.5 per cent abamectin obtained superior efficacy indexes against this ectoparasite, when compared with formulations containing 0.5 per cent ivermectin, 1 per cent ivermectin and the combination of 1 per cent abamectin +20 per cent levamisole. The results of efficacy of the ivermectin+abamectin and the 0.5 per cent ivermectin against Haematobia irritans were similar. Against Cochliomyia hominivorax larvae, all pour-on formulations tested (1.5 per cent ivermectin +0.5 per cent abamectin, 0.5 per cent ivermectin and 0.5 per cent abamectin), as well as 1 per cent doramectin administered subcutaneously, were considered ineffective. Cattle medicated with 1.5 per cent ivermectin +0.5 per cent abamectin, pour-on, remained free from parasitism by Dermatobia hominis larvae during 42 days (96 per cent efficacy), while values superior to 90 per cent were obtained by 0.5 per cent ivermectin (92 per cent) and 0.5 per cent abamectin (93 per cent) until the 42nd and 35th days post treatment, respectively. Against Haemonchus placei and Oesophagostomum radiatum, the pour-on of ivermectin+abamectin showed better efficacy than the 0.5 per cent ivermectin and 0.5 per cent abamectin. As to Cooperia punctata, there was no difference regarding efficacy results obtained by the avermectins combination and abamectin. The pour-on combination of 1.5 per cent ivermectin +0.5 per cent abamectin obtained high efficacy against R. (B.) microplus, D. hominis and some species of cattle gastrointestinal helminths when compared with formulations of 0.5 per cent ivermectin and 0.5 per cent abamectin administered through the same route. PMID:26392893

  8. Endectocide activity of a pour-on formulation containing 1.5 per cent ivermectin +0.5 per cent abamectin in cattle.

    PubMed

    Silva, Heloisa Cristina; Prette, Nancy; Lopes, Welber Daniel Zanetti; Sakamoto, Cláudio Alessandro M; Buzzulini, Carolina; Dos Santos, Thais Rabelo; Cruz, Breno Cayeiro; Teixeira, Weslen F Pires; Felippelli, Gustavo; Carvalho, Rafael Silveira; Maciel, Willian Giquelin; Soares, Vando Edésio; da Costa, Alvimar José

    2015-01-01

    The present work aimed to evaluate, through ten different studies, the therapeutic efficacy of a new pour-on formulation, containing 1.5 per cent ivermectin +0.5 per cent abamectin, against parasites of cattle. Results obtained on trials against Rhipicephalus (Boophilus) microplus showed that the pour-on combination of 1.5 per cent ivermectin +0.5 per cent abamectin obtained superior efficacy indexes against this ectoparasite, when compared with formulations containing 0.5 per cent ivermectin, 1 per cent ivermectin and the combination of 1 per cent abamectin +20 per cent levamisole. The results of efficacy of the ivermectin+abamectin and the 0.5 per cent ivermectin against Haematobia irritans were similar. Against Cochliomyia hominivorax larvae, all pour-on formulations tested (1.5 per cent ivermectin +0.5 per cent abamectin, 0.5 per cent ivermectin and 0.5 per cent abamectin), as well as 1 per cent doramectin administered subcutaneously, were considered ineffective. Cattle medicated with 1.5 per cent ivermectin +0.5 per cent abamectin, pour-on, remained free from parasitism by Dermatobia hominis larvae during 42 days (96 per cent efficacy), while values superior to 90 per cent were obtained by 0.5 per cent ivermectin (92 per cent) and 0.5 per cent abamectin (93 per cent) until the 42nd and 35th days post treatment, respectively. Against Haemonchus placei and Oesophagostomum radiatum, the pour-on of ivermectin+abamectin showed better efficacy than the 0.5 per cent ivermectin and 0.5 per cent abamectin. As to Cooperia punctata, there was no difference regarding efficacy results obtained by the avermectins combination and abamectin. The pour-on combination of 1.5 per cent ivermectin +0.5 per cent abamectin obtained high efficacy against R. (B.) microplus, D. hominis and some species of cattle gastrointestinal helminths when compared with formulations of 0.5 per cent ivermectin and 0.5 per cent abamectin administered through the same route. PMID:26392893

  9. Reduced efficacy of moxidectin and abamectin in young red deer (Cervus elaphus) after 20 years of moxidectin pour-on use on a New Zealand deer farm.

    PubMed

    Mackintosh, C G; Cowie, C; Fraser, K; Johnstone, P; Mason, P C

    2014-01-17

    A study was undertaken on weaned 4-5 month old farmed red deer to test the efficacy of moxidectin and abamectin anthelmintics, given by three different routes of administration, compared with an untreated control. Faecal samples were collected on days 0, 7 and 14 for a faecal egg count reduction test (FECRT), blood samples were collected on days 0, 0.5, 1, 2, 3, 5, 7, 10 and 14 for pharmacokinetics, and the deer were killed on days 14 or 15 for total nematode count. The control group averaged 1264 adult Ostertagia-type nematode parasite species and treatment efficacy was 77.4% for moxidectin injection, 26% for oral moxidectin and 27.6% for pour-on moxidectin, while the treatment efficacy was 72.4% for abamectin injection, 70.1% for oral abamectin (Hi-Mineral) and 34.1% for pour-on abamectin. Both moxidectin and abamectin injections were significantly more efficacious than their equivalent pour-ons. There was a significant difference in efficacy between oral abamectin (Hi-Mineral) and oral moxidectin (P<0.01). The control group averaged 2956 adult lungworm (Dictyocaulus eckerti) and 50 Oesophagostomum venulosum in the large intestine and treatment efficacy against these nematodes was 100% for all treatments. There were negligible numbers of other gastro-intestinal nematodes. At slaughter, there was a significant correlation (P=0.02) between FEC and Ostertagia-type nematodes in the untreated controls. Relatively few eggs were found in faeces from treated animals at 7 and 14 days post-treatment despite significant worm burdens in all six treatment groups, suggesting egg-laying suppression in resistant nematodes, and all three different FECRT calculations tended to overestimate the efficacy of the treatments compared with actual nematode counts. Peak plasma concentrations (Cmax) for both actives were measured 12h after treatment for injection and oral and at 5 days for pour-on. Cmax (ng/ml) for moxidectin injection, oral and pour-on were 71.8, 8.3 and 0.4, respectively

  10. Effects of cattle treatment with a fluazuron pour-on on survival and reproduction of the dung beetle species Onthophagus gazella (Fabricius).

    PubMed

    Kryger, U; Deschodt, C; Davis, A L V; Scholtz, C H

    2007-02-28

    While resistance against many other classes of acaricides has been described, products containing benzoylphenyl urea are currently still successfully used against the pesticide-resistant blue tick (Boophilus decoloratus) in South Africa. In order to assess any adverse impact of these tickicides on the important dung beetle (Coleoptera: Scarabaeidae) fauna, a bioassay was undertaken on the ecotoxicological effects of a fluazuron (benzoylphenyl urea) pour-on formulation (Acatak) on the survival and reproduction of the African dung beetles species Onthophagus gazella (Fabricius). The experiment yielded no significant differences in adult or larval survival, egg production, fecundity and fertility between the control and treatment group following three beetle generations over. These results suggested that treatment of cattle with the fluazuron pour-on formulation Acatak was not detrimental to the selected dung beetle species in any notable way. PMID:16978786

  11. Lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse

    PubMed Central

    Kahan, Meldon; Mailis-Gagnon, Angela; Wilson, Lynn; Srivastava, Anita

    2011-01-01

    Résumé Objectif Présenter aux médecins de famille un résumé clinique pratique des lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse, produites par le National Opioid Use Guideline Group. Qualité des données Pour produire les lignes directrices, les chercheurs ont effectué une synthèse critique de la littérature médicale sur l’efficacité et l’innocuité des opioïdes pour la douleur chronique non cancéreuse et ont rédigé une série de recommandations. Un panel de 49 cliniciens experts de toutes les régions du Canada ont passé en revue l’ébauche et ont atteint un consensus sur 24 recommandations. Message principal Il est recommandé de faire un dépistage du risque de dépendance avant de prescrire des opioïdes. On recommande des opioïdes faibles (codéine et tramadol) pour une douleur de légère à modérée qui n’a pas répondu aux traitements de première intention. On peut essayer l’oxycodone, l’hydromorphone et la morphine chez les patients qui n’ont pas eu de soulagement avec des opioïdes plus faibles. Une faible dose initiale et une lente hausse du titrage sont recommandées, ainsi qu’une étroite surveillance du patient qu’on a d’abord renseigné. Les médecins doivent surveiller l’apparition de complications comme l’apnée du sommeil. La dose optimale est celle qui améliore le fonctionnement ou atténue les cotes d’évaluation de la douleur d’au moins 30 %. Pour la grande majorité des patients, la dose optimale sera bien en deçà de l’équivalent de 200 mg de morphine par jour. On recommande le sevrage progressif pour les patients qui n’ont pas répondu à un essai d’opioïdes adéquat. Conclusion Les opioïdes jouent un rôle important dans la prise en charge de la douleur chronique non cancéreuse, mais il faut en prescrire avec prudence pour limiter les dommages potentiels. Les nouvelles lignes directrices

  12. The Influence of the Melt-Pouring Temperature and Inoculant Content on the Macro and Microstructure of the IN713C Ni-Based Superalloy

    NASA Astrophysics Data System (ADS)

    Matysiak, Hubert; Zagorska, Malgorzata; Balkowiec, Alicja; Adamczyk-Cieslak, Boguslawa; Dobkowski, Krzysztof; Koralnik, Mateusz; Cygan, Rafal; Nawrocki, Jacek; Cwajna, Jan; Kurzydlowski, Krzysztof J.

    2016-01-01

    The aim of this work was to determine the effect of melt-pouring temperature T m and inoculant (cobalt aluminate—CoAl2O4) concentration in the prime coat of the shell mold on the macro- and microstructure of the IN713C superalloy. The results show that cobalt aluminate is an effective modifier of the IN713C superalloy, which causes refinement of the equiaxed grains (EX) and a reduction of the fraction and size of the columnar grains on the casting surface. Also, the melt-pouring temperature in the range of 1450-1520°C was found to influence the mean EX grain size. Based on the results of differential thermal analysis of the alloy and detailed microstructure characterization, a sequence of precipitations has been proposed that advances current understanding of processes that take place during alloy solidification and casting cooling.

  13. L’administration postnatale de corticoïdes pour traiter ou prévenir les affections pulmonaires chroniques chez les prématurés

    PubMed Central

    2002-01-01

    Le présent énoncé est conçu à l’intention des professionnels de la santé qui soignent des nouveau-nés et de jeunes nourrissons. Il vise à examiner les effets à court et à long terme de l’administration postnatale de corticoïdes systémiques et par inhalation pour prévenir ou traiter une affection pulmonaire chronique évolutive ou établie et à faire des recommandations quant à l’usage de corticoïdes chez les nourrissons à très faible poids de naissance. Le recours systématique à la dexaméthasone systémique pour prévenir ou traiter une affection pulmonaire chronique n’est pas recommandé chez les nourrissons à très faible poids de naissance.

  14. COMPUTER MODELING OF HIGH-LEVEL WASTE GLASS TEMPERATURES WITHIN DWPF CANISTERS DURING POURING AND COOL DOWN

    SciTech Connect

    Amoroso, J.

    2011-10-09

    This report describes the results of a computer simulation study to predict the temperature of the glass at any location inside a DWPF canister during pouring and subsequent cooling. These simulations are an integral part of a larger research focus aimed at developing methods to predict, evaluate, and ultimately suppress nepheline formation in HLW glasses. That larger research focus is centered on holistically understanding nepheline formation in HLW glass by exploring the fundamental thermal and chemical driving forces for nepheline crystallization with respect to realistic processing conditions. Through experimental work, the goal is to integrate nepheline crystallization potential in HLW glass with processing capability to ultimately optimize waste loading and throughput while maintaining an acceptable product with respect to durability. The results of this study indicated severe temperature gradients and prolonged temperature dwell times exist throughout different locations in the canister and that the time and temperatures that HLW glass is subjected to during processing is a function of pour rate. The simulations indicate that crystallization driving forces are not uniform throughout the glass volume in a DWPF (or DWPF-like) canister and illustrate the importance of considering overall kinetics (chemical and thermal driving forces) of nepheline formation when developing methods to predict and suppress its formation in HLW glasses. The intended path forward is to use the simulation data both as a driver for future experimental work and, as an investigative tool for evaluating the impact of experimental results. Simulation data will be used to develop laboratory experiments to more acutely evaluate nepheline formation in HLW glass by incorporating the simulated temperatures throughout the canister into the laboratory experiments. Concurrently, laboratory experiments will be performed to identify nepheline crystallization potential in HLW glass as a function of

  15. Residues of zeta-cypermethrin in bovine tissues and milk following pour-on and spray application.

    PubMed

    Rothwell, J T; Burnett, T J; Hacket, K; Chevis, R; Lowe, L B

    2001-11-01

    The depletion of zeta-cypermethrin residues in bovine tissues and milk was studied. Beef cattle were treated three times at 3-week intervals with 1 ml 10 kg-1 body weight of a 25 g litre-1 or 50 g litre-1 pour-on formulation (2.5 and 5.0 mg zeta-cypermethrin kg-1 body weight) or 100 mg kg-1 spray to simulate a likely worst-case treatment regime. Friesian and Jersey dairy cows were treated once with 2.5 mg zeta-cypermethrin kg-1 in a pour-on formulation. Muscle, liver and kidney residue concentrations were generally less than the limit of detection (LOD = 0.01 mg kg-1). Residues in renal-fat and back-fat samples from animals treated with 2.5 mg kg-1 all exceeded the limit of quantitation (LOQ = 0.05 mg kg-1), peaking at 10 days after treatment. Only two of five kidney fat samples were above the LOQ after 34 days, but none of the back-fat samples exceeded the LOQ at 28 days after treatment. Following spray treatments, fat residues were detectable in some animals but were below the LOQ at all sampling intervals. Zeta-cypermethrin was quantifiable (LOQ = 0.01 mg kg-1) in only one whole-milk sample from the Friesian cows (0.015 mg kg-1, 2 days after treatment). In whole milk from Jersey cows, the mean concentration of zeta-cypermethrin peaked 1 day after treatment, at 0.015 mg kg-1, and the highest individual sample concentration was 0.025 mg kg-1 at 3 days after treatment. Residues in milk were not quantifiable beginning 4 days after treatment. The mean concentrations of zeta-cypermethrin in milk fat from Friesian and Jersey cows peaked two days after treatment at 0.197 mg kg-1 and 0.377 mg kg-1, respectively, and the highest individual sample concentrations were 2 days after treatment at 0.47 mg kg-1 and 0.98 mg kg-1, respectively. PMID:11721528

  16. Use of deltamethrin 'pour-on' insecticide for the control of cattle trypanosomosis in the presence of high tsetse invasion.

    PubMed

    Rowlands, G J; Leak, S G; Mulatu, W; Nagda, S M; Wilson, A; d'Ieteren, G D

    2001-03-01

    A deltamethrin 'pour-on' insecticide was applied monthly to over 2000 cattle exposed to a high challenge of drug-resistant trypanosomes and high tsetse re-invasion pressure in the Ghibe valley, south-west Ethiopia. Blood samples were taken monthly from an average of 760 cattle for determination of PCV and presence of trypanosomes. The area of the valley is approximately 350 km2 and the cattle grazed in roughly four locations covering about a quarter to half of the area. Two years before the trial commenced, Glossina morsitans submorsitans Newstead (Diptera: Glossinidae) began to invade the valley. Despite the use of the pour-on the mean apparent density of G. m. submorsitans continued to rise, and, during the 4 years of tsetse control, was more than three-fold higher than that recorded during the previous 18 months. Over the same period there was little change in the apparent density of Glossina pallidipes Austen (Diptera: Glossinidae). By contrast, the mean monthly prevalence of trypanosome infections in cattle over 36 months of age decreased from 38.3 to 29.0%, the incidence of new infections decreased from 26.6 to 16.0% (a reduction of 40%), and packed cell volume in cattle increased from 21.7 to 24.1%. Evidence of a change in apparent parasite transmission rate was demonstrated by regression of infection incidence in cattle on the logarithm of apparent density of G. m. submorsitans. Before the trial started the regression coefficient was 45.8 +/- 6.3 and this reduced to 9.2 +/- 2.5% incidence per log(e) (flies/trap/day) during the period of tsetse control. It was concluded that this indicated reductions in tsetse numbers in the immediate vicinities of cattle in a way that was not reflected in overall tsetse catches. Nevertheless, the comparatively high levels of trypanosome prevalence that persisted in the cattle demonstrates that, where invasion prevalence is high, treatment of small pockets of cattle will not eradicate tsetse. To achieve more significant

  17. Anesthésie pour prothése totale de la hanche: à propos de 50 cas

    PubMed Central

    Serghini, Issam; Qamouss, Youssef; Zoubir, Mohamed; Lalaoui, Jaafar Salim; Koulali, Idrissi Khalid; Boughalem, Mohamed

    2015-01-01

    La chirurgie de la prothèse totale de la hanche (PTH) est une chirurgie fonctionnelle qui consiste en un remplacement d'une articulation endommagée afin d'améliorer la qualité de vie du patient. L'anesthésie pour PTH exige une préparation rigoureuse à l'intervention, la consultation d'anesthésie sera donc la clef de cette réussite. Nous avons réalisé une étude rétrospective concernant 60 arthroplasties totales de la hanche implantées chez 50 patients adultes, colligée au sevice de Traumatologie et de chirurgie orthopédique à l'Hôpital Militaire Avicenne de Marrakech sur une période étalée de Janvier 2010 au Décembre 2012. Nous avons évalué la prise en charge anesthésique: pré, per et postopératoire des patients opérés pour une PTH. La moyenne d’âge était de 56,5 ans, le sex-ratio était de 1,63 en faveur des hommes. L'indication prédominante était la coxarthrose primitive. L'anesthésie générale était la technique anesthésique la plus utilisée (66% des cas), l'intubation difficile était rencontrée chez 6% de nos patients. La durée moyenne de l'acte chirurgical était de 114 +/- 25,33 mn. 12% de nos patients ont présenté une hypotension artérielle peropératoire. L'incidence de la transfusion homologue perop était de 14%. Nous avons noté 08 cas de complications postop: 03 cas d'infection de la PTH 15 jours après l'intervention, 03 cas de descellement aseptique, 01 cas de luxation de PTH et 01 cas de descellement septique avec un recul moyen de 54 mois. PMID:27047619

  18. TTP SR1-6-WT-31, Milestone XXX, Milestone C.1-2 Report: Functional Test of Pour Spout Insert and Knife Edge

    SciTech Connect

    Bickford, D.F.

    1999-07-29

    During the first two years of radioactive operation of the Defense Waste Processing Facility process, several areas for improvement in melter design were identified. Due to the need for a process that allows continuous melter operation, the down time associated with disruption to melter operation and pouring has significant cost impact. A major objective of this task is to address performance limitations and deficiencies identified by the user.

  19. The residual efficacy of a cypermethrin pour-on formulation applied on goats on the mortality and blood intake of Triatoma infestans.

    PubMed

    Amelotti, Ivana; Catalá, Silvia Susana; Gorla, David Eladio

    2012-12-01

    Triatoma infestans is the main vector of Trypanosoma cruzi, the aetiological agent of Chagas disease in the Gran Chaco region of South America. As a frequent blood meal source for triatomine bugs, domestic goats play a key role in the eco-epidemiology of Chagas disease. The aim of this study was to evaluate the mortality and blood intake of T. infestans fed on goats that had been treated with different doses of pour-on insecticide. Third-instar nymphs were fed on goats that had been treated with 0 cc, 5 cc, 10 cc or 15 cc of a pour-on formulation of cypermethrin. The exposure of T. infestans to animals treated at different post-application intervals revealed a residual activity of the insecticide. The mortality rate in the treated groups was higher than in the control groups until 30 days post-insecticide application (p = 0.03), except in the group treated with 5 cc, in which no mortality was detected after seven days of insecticide application. Rainfall affected the triatomicide effect, reducing the time of residual activity. The cypermethrin pour-on treatment decreased the blood intake of T. infestans. Thirty days after the cypermethrin application, nymph mortality was 16% (± 13) with both doses (10 cc and 15 cc). The 15 cc dose did not result in higher insect mortality or increased persistence compared to the 10 cc dose. PMID:23295751

  20. Control of experimental Triatoma infestans populations: effect of pour-on cypermethrin applied to chickens under natural conditions in the Argentinean Chaco region.

    PubMed

    Amelotti, I; Catalá, S S; Gorla, D E

    2014-06-01

    Among peridomestic structures, chicken coops are sites of major importance for the domestic ecology of Triatoma infestans (Hemiptera: Reduviidae). The aim of this study was to evaluate in an experimental context the effects of a cypermethrin pour-on formulation applied to chickens on blood intake, moulting and mortality in T. infestans, under the natural climatic conditions of a region endemic for Chagas' disease. Experimental chicken huts were made of bricks and covered with plastic mosquito nets. Ninety fourth-instar nymphs were maintained in each hut. The study used a completely random design in which chickens in the experimental group were treated with a cypermethrin pour-on formulation. Five replicates (= huts) of the experimental and control groups were conducted. The number of live T. infestans, blood intake and moults to fifth-instar stage were recorded at 1, 5, 20, 35 and 45 days after the application of cypermethrin. Cumulative mortality was higher in nymphs exposed to treated chickens (> 71%) than in control nymphs (< 50%) (P < 0.01). Blood intake and moulting rate were lower in nymphs fed on treated chickens than in control nymphs (P < 0.05). Pour-on cypermethrin was able to cause significant mortality, although it did not eliminate the experimental population of T. infestans. PMID:24191962

  1. Faut-il continuer à infiltrer le scalp par un anesthésique local pour une craniotomie?

    PubMed Central

    Doumiri, Mouhssine; Motiaa, Youssef; Razine, Rachid; Amor, Morad; Moussaoui, Abdelmajid; Kabbaj, Saad; Maazouzi, Wajdi

    2015-01-01

    Introduction Le maintien de la stabilité hémodynamique est un objectif primordial de l'anesthésie pour craniotomie. Peu d’études ont prouvé l'efficacité de l'infiltration du scalp par un anesthésique local pour le maintien de la stabilité hémodynamique après l'incision. L'objectif de notre travail est d’évaluer l'influence de l'infiltration de la ligne d'incision du scalp par la lidocaïne à 0,5% adrénalinée sur les paramètres hémodynamiques après incision pour craniotomie supratentorielle. Méthodes Étude prospective en double aveugle réalisée au bloc opératoire de l'hôpital des spécialités de Rabat sur une période d'une année incluant 80 malades programmés pour craniotomie supratentorielle. Les malades étaient randomisés par tirage au sort en 2 groupes: Le groupe 1 était infiltré par 40 ml du sérum salé adrénaliné (1/200 000) et le groupe 2 était infiltré par 40 ml de la lidocaïne 0,5% adrénalinée (1/200 000). Le critère de jugement principal était la pression artérielle moyenne (PAM) après l'incision. L’étude statistique a fait appel aux tests t de student et l'U- mann-whitney. Une valeur de p <0.05 était considérée significative. Résultats L’étude a inclus 80 patients (40 hommes et 40 femmes). L’âge moyen était 42,33±14,76 ans. Le poids moyen était 71,58 ±10 kg. Le 3/4 des patients était ASA 1, seulement 25% étaient ASA2. La durée moyenne de la chirurgie était de 252,06±38,62 mn. Les deux groupes étaient comparables concernant l’âge, le sexe, le poids, la durée d'intervention, le type d'abord chirurgical, la dose totale du fentanyl reçue jusqu'a l'incision, ainsi que les paramètres hémodynamiques avant l'incision. Après l'incision la FC moyenne a augmenté dans les deux groupes: 80,53±7,72 bpm dans le groupe contrôle et 76,85±8,52 bpm dans le groupe lidocaïne. La différence d'augmentation de la FC entre les deux groupes était statistiquement significative (p = 0,047). L

  2. DISCOURS QUI RÉSISTENT À L’OBJECTIVATION : QUE PEUT-ON EN TIRER POUR L’ÉVALUATION?

    PubMed Central

    Brousselle, Astrid

    2013-01-01

    Résumé L’évaluateur doit porter attention aux distorsions qu’il contribue à créer lorsqu’il utilise l’entrevue comme méthode de collecte de données. L’évaluation est un exercice politique qui, placé dans un contexte politique, peut favoriser l’émergence de discours de résistance à l’objectivation. À partir des entrevues que nous avons effectuées lors de l’évaluation du processus d’implantation de l’initiative ONUSIDA d’accès aux médicaments au Chili, nous illustrons différentes tactiques que les acteurs utilisent et qui peuvent soit attirer la sympathie de l’évaluateur, soit faire obstacle à son besoin d’information. Nous présentons une méthode d’analyse que l’évaluateur peut utiliser pour redonner du sens aux discours de résistance. PMID:23997421

  3. Le traitement familial des enfants et des adolescents anorexiques : Des lignes directrices pour le médecin communautaire

    PubMed Central

    Findlay, S; Pinzon, J; Taddeo, D; Katzman, DK

    2010-01-01

    L’anorexie mentale (AM) est une maladie grave qui met la vie en danger et qui fait généralement son apparition pendant l’adolescence. Les données probantes au sujet du traitement optimal de l’AM chez les enfants et les adolescents sont en croissance, mais il reste beaucoup à apprendre. Même si les démarches thérapeutiques actuelles varient au Canada et ailleurs, les données jusqu’à présent indiquent que le traitement familial (TF) est le plus efficace pour les enfants et les adolescents anorexiques. Un élément essentiel du modèle de TF, c’est que les parents sont investis de la responsabilité de rétablir la santé physique de leur enfant et de s’assurer de la reprise complète de son poids. Le médecin qui comprend les principes fondamentaux et la philosophie du TF peut mettre en place les éléments de cette intervention fondée sur des faits probants auprès des jeunes patients anorexiques et de leur famille.

  4. Annuaire du bureau des Longitudes : guide de données astronomiques 2011 pour l'observation du ciel

    NASA Astrophysics Data System (ADS)

    Institut de Mécanique Céleste Et de Calcul Des Ephémérides (Imcce); Bureau Des Longitudes (Bdl)

    2010-07-01

    Destiné aux astronomes, professionnels ou amateurs, cet ouvrage se décompose de la façon suivante : Les trois premiers chapitres de cet ouvrage contiennent : les données sur les différents calendriers et leur concordance, les fêtes légales en France, les différentes échelles de temps, les dates de décrets sur les heures légales en France métropolitaine parues au Journal Officiel depuis 1916 ; des notions nécessaires à la compréhension et à l'emploi des éphémérides contenues dans l'ouvrage. Les chapitres suivant fournissent des éphémérides astronomiques : les positions du Soleil et de la Lune ; les positions des planètes et de leurs satellites ; les positions des astéroïdes et des comètes ; les explications et des données pour l'observation de la surface du Soleil, de la Lune et des planètes ; des cartes du ciel, une liste de constellations et les positions et occultations des étoiles ; des données sur les éclipses de Soleil et de Lune et sur les phénomènes astronomiques ; la liste des observatoires astronomiques les plus connus.

  5. Annuaire du bureau des Longitudes : guide de données astronomiques 2012 pour l'observation du ciel

    NASA Astrophysics Data System (ADS)

    Institut de Mécanique Céleste Et de Calcul Des Ephémérides (Imcce); Bureau Des Longitudes (Bdl)

    2011-07-01

    Destiné aux astronomes, professionnels ou amateurs, cet ouvrage se décompose de la façon suivante : Les trois premiers chapitres de cet ouvrage contiennent : les données sur les différents calendriers et leur concordance, les fêtes légales en France, les différentes échelles de temps, les dates de décrets sur les heures légales en France métropolitaine parues au Journal Officiel depuis 1916 ; des notions nécessaires à la compréhension et à l'emploi des éphémérides contenues dans l'ouvrage. Les chapitres suivant fournissent des éphémérides astronomiques : les positions du Soleil et de la Lune ; les positions des planètes et de leurs satellites ; les positions des astéroïdes et des comètes ; les explications et des données pour l'observation de la surface du Soleil, de la Lune et des planètes ; des cartes du ciel, une liste de constellations et les positions et occultations des étoiles ; des données sur les éclipses de Soleil et de Lune et sur les phénomènes astronomiques ; la liste des observatoires astronomiques les plus connus.

  6. Santé sexuelle et reproductive des adolescentes de Bobo Dioulasso, Burkina Faso: place de la communication parents-adolescentes pour la réduction des risques

    PubMed Central

    Some, Donmozoun Télesphore; Some, Der Adolphe; Hien, Hervé; Diallo, Ramata; Zingue, Dézémon; Diallo, Ibrahim; Diagbouga, Serge; Dao, Blami

    2012-01-01

    Introduction Les adolescentes sont très vulnérables face aux Infections Sexuellement Transmissibles (IST) et au VIH/SIDA. Notre étude a pour objectifs d’explorer la qualité de la communication entre les adolescentes et leurs parents sur les IST/VIH/SIDA et de recueillir leurs suggestions pour l’amélioration de cette communication. Méthodes L’étude était transversale qualitative sur 2 mois. La population de l’étude était composée par des adolescentes de 13 à 17 ans et leurs parents habitant la ville de Bobo Dioulasso. Vingt (20) adolescentes scolarisées ont été tirés au sort dans trois établissements secondaires et 20 autres non scolarisées choisies de façon accidentelle dans la ville. Les informations ont été collectées à l’aide de 8 focus groups. Les discussions ont été enregistrées sur cassettes, retranscrites en verbatim, et analysées à l’aide du logiciel QSR NVIVO 2.0. Résultats Les adolescentes et leurs parents communiquent très peu ou pas sur les questions des IST/VIH/SIDA; l’auto-information par les paires ou les médias est la première source d’information. Pour les parents, l’information existe et est accessible aux adolescentes alors que pour ces dernières, leurs connaissances de ces maladies sont parfois erronées. L’abstinence, la fidélité et le dépistage volontaire comme moyen de prévention sont très peu évoqués par les adolescentes de même que par leurs parents. Conclusion La communication parents-adolescentes est insuffisante voire absente dans certains milieux. Il est urgent de conduire des actions auprès des adolescentes et leurs parents pour mieux les informer sur les IST/VIH/SIDA et améliorer la communication sur ces maladies. PMID:22655099

  7. Integration des sciences et de la langue: Creation et experimentation d'un modele pedagogique pour ameliorer l'apprentissage des sciences en milieu francophone minoritaire

    NASA Astrophysics Data System (ADS)

    Cormier, Marianne

    Les faibles resultats en sciences des eleves du milieu francophone minoritaire, lors d'epreuves au plan national et international, ont interpelle la recherche de solutions. Cette these avait pour but de creer et d'experimenter un modele pedagogique pour l'enseignement des sciences en milieu linguistique minoritaire. En raison de la presence de divers degres de francite chez la clientele scolaire de ce milieu, plusieurs elements langagiers (l'ecriture, la discussion et la lecture) ont ete integres a l'apprentissage scientifique. Nous avions recommande de commencer le processus d'apprentissage avec des elements langagiers plutot informels (redaction dans un journal, discussions en dyades...) pour progresser vers des activites langagieres plus formelles (redaction de rapports ou d'explications scientifiques). En ce qui a trait a l'apprentissage scientifique, le modele preconisait une demarche d'evolution conceptuelle d'inspiration socio-constructiviste tout en s'appuyant fortement sur l'apprentissage experientiel. Lors de l'experimentation du modele, nous voulions savoir si celui-ci provoquait une evolution conceptuelle chez les eleves, et si, simultanement, le vocabulaire scientifique de ces derniers s'enrichissait. Par ailleurs, nous cherchions a comprendre comment les eleves vivaient leurs apprentissages dans le cadre de ce modele pedagogique. Une classe de cinquieme annee de l'ecole de Grande-Digue, dans le Sud-est du Nouveau-Brunswick, a participe a la mise a l'essai du modele en etudiant les marais sales locaux. Lors d'entrevues initiales, nous avons remarque que les connaissances des eleves au sujet des marais sales etaient limitees. En effet, s'ils etaient conscients que les marais etaient des lieux naturels, ils ne pouvaient pas necessairement les decrire avec precision. Nous avons egalement constate que les eleves utilisaient surtout des mots communs (plantes, oiseaux, insectes) pour decrire le marais. Les resultats obtenus indiquent que les eleves ont

  8. Fabrication de transistors mono-electroniques en silicium pour le traitement classique et quantique de l'information: une approche nanodamascene

    NASA Astrophysics Data System (ADS)

    Harvey-Collard, Patrick

    Les transistors mono-electroniques (SETs) sont des dispositifs ayant un grand potentiel d'applications, comme la detection de charge ultra-sensible, la logique a basse consommation de puissance, la memoire ou la metrologie. De plus, la possibilite de pieger un seul electron et de manipuler son etat de spin pourrait permettre des applications en informatique quantique. Le silicium est un materiau interessant pour fabriquer l'ilot d'un SET. Son gap semi-conducteur permet le fonctionnement du dispositif dans le regime a un seul electron ou trou et pourrait permettre d'etendre la plage d'operation du SET en temperature en augmentant l'energie d'addition du diamant central de la valeur du gap. En outre, le silicium beneficie de plus de quarante annees d'expertise en microfabrication et d'une compatibilite avec la technologie metal--oxyde--semi-conducteur complementaire (CMOS). Cependant, la fabrication de ces dispositifs fait face a de serieuses limitations a cause de la taille nanometrique requise pour l'ilot. A ce jour, les procedes de fabrication proposes permettant l'operation a la temperature ambiante sont trop peu reproductibles pour permettre des applications a grande echelle. Dans ce memoire de maitrise, la fabrication de transistors mono-electroniques en silicium (Si-SETs) pour le traitement classique et quantique de l'information est realisee avec un procede nanodamascene. Le polissage chimico-mecanique (CMP) est introduit comme etape clef de la fabrication du transistor, permettant le controle au nanometre pres (nanodamascene) de l'epaisseur du transistor. Cet outil permet la fabrication de dispositifs ayant une geometrie auparavant impossible a realiser et ouvre la porte a l'innovation technologique. De plus, un procede de gravure du silicium par plasma a couplage inductif (ICP) est developpe pour permettre la fabrication de nanostructures de silicium sur une nanotopographie alliant le nano et le 3D. Les Si-SETs fabriques sont caracterises a basse

  9. ELIMINATION OF THE CHARACTERIZATION OF DWPF POUR STREAM SAMPLE AND THE GLASS FABRICATION AND TESTING OF THE DWPF SLUDGE BATCH QUALIFICATION SAMPLE

    SciTech Connect

    Amoroso, J.; Peeler, D.; Edwards, T.

    2012-05-11

    A recommendation to eliminate all characterization of pour stream glass samples and the glass fabrication and Product Consistency Test (PCT) of the sludge batch qualification sample was made by a Six-Sigma team chartered to eliminate non-value-added activities for the Defense Waste Processing Facility (DWPF) sludge batch qualification program and is documented in the report SS-PIP-2006-00030. That recommendation was supported through a technical data review by the Savannah River National Laboratory (SRNL) and is documented in the memorandums SRNL-PSE-2007-00079 and SRNL-PSE-2007-00080. At the time of writing those memorandums, the DWPF was processing sludge-only waste but, has since transitioned to a coupled operation (sludge and salt). The SRNL was recently tasked to perform a similar data review relevant to coupled operations and re-evaluate the previous recommendations. This report evaluates the validity of eliminating the characterization of pour stream glass samples and the glass fabrication and Product Consistency Test (PCT) of the sludge batch qualification samples based on sludge-only and coupled operations. The pour stream sample has confirmed the DWPF's ability to produce an acceptable waste form from Slurry Mix Evaporator (SME) blending and product composition/durability predictions for the previous sixteen years but, ultimately the pour stream analysis has added minimal value to the DWPF's waste qualification strategy. Similarly, the information gained from the glass fabrication and PCT of the sludge batch qualification sample was determined to add minimal value to the waste qualification strategy since that sample is routinely not representative of the waste composition ultimately processed at the DWPF due to blending and salt processing considerations. Moreover, the qualification process has repeatedly confirmed minimal differences in glass behavior from actual radioactive waste to glasses fabricated from simulants or batch chemicals. In contrast, the

  10. Mesure du coewicient d'absorption optique dans le silicium multicristallin de type P pour photopiles solaires

    NASA Astrophysics Data System (ADS)

    Gervais, J.

    1993-07-01

    The minority carrier diffusion length L characterizes the electrical quality of multicrystalline silicon wafers used for photovoltaics. Its determination before and after different treatments (impurity diffusion, passivation, metallisation) is needfull and requires the accurate knowledge of the optical absorption coefficient α in the near infrared. We have determinated the spectral variation of α in the range between 0.86 and 1.06 μm and we propose an analytic expression which is very close to those proposed for solar grade single crystals. In addition we have verified that the values of α are not affected by long phosphorus diffusion needed to getter metallic impurities. La longueur de diffusion des porteurs minoritaires L caractérise la qualité du silicium multicristallin utilisé pour la conversion photovoltaïque. Sa détermination avant et après les divers traitements (diffusion d'impuretés, passivation des défauts, métallisation) est indispensable et nécessite la connaissance précise du coefficient d'absorption optique α dans le proche infrarouge. Nous avons déterminé expérimentalement la variation spectrale de α entre 0,86 et 1,06 μm et nous proposons un développement qui est très proche de ceux trouvés dans des monocristaux de silicium de qualité solaire. La variation de α n'est pas influencée par des diffusions de phosphore prolongées nécessaires à l'extraction et au piégeage d'impuretés métalliques.

  11. Douleurs et conflits : Approche comparative et implications pour la qualité des soins en fin de vie

    PubMed Central

    Mpinga, Emmanuel Kabengele; Verloo, Henk; Rapin, Charles-Henri; Chastonay, Philippe

    2009-01-01

    Le conflit serait-il à l’organisation ce que la douleur est à un organisme ? OBJECTIFS: Explorer les similitudes et les differences entre les douleurs et les conflits dans les contextes de soins de fin de vie. Mieux comprendre le rôle des conflits dans la qualité de ces soins. MÉTHODOLOGIE: Méthode comparative et réflexive autour des politiques de prise en charge des douleurs et des conflits dans les systèmes de soins. RÉSULTATS: Les conflits et les douleurs présentent de nombreuses similitudes de par leur identité, leur typologie, leur prévalence, leur fonction d’alerte, leurs coûts économiques et sociaux, le déni ou l’occultation qui les entourent et les obstacles à leur prise en charge adéquate. À l’inverse, des différences apparaissent dans la prise en charge des douleurs comparée à celle des conflits. Ces différences portent sur l’existence des programmes de prévention et de lutte sur les scènes nationale et internationale, la mise en œuvre des activités de recherche et de formation et la visibilité sociale. Pour les conflits, cette mise en œuvre n’existe pas encore. CONCLUSION: Les décideurs en clinique et en santé publique devraient intégrer les conflits comme un indicateur de la qualité des soins et élaborer des politiques pertinentes en matière de santé. PMID:19714268

  12. Quelle place pour l’anesthésie locorégionale chez les brûlés?

    PubMed Central

    Chaibdraa, A.; Medjelekh, M.S.; Saouli, A.; Bentakouk, M.C.

    2015-01-01

    Summary La pratique de l’anesthésie locorégionale chez les brûlés est limitée par de nombreux facteurs. Elle est considérée comme marginale dans l’approche multimodale du traitement de la douleur par excès de nociception. Ce travail rétrospectif, sur une période de 3 années, porte sur les anesthésies locorégionales (ALR) réalisées. Les résultats obtenus vont permettre, en regard de la rareté des données de la littérature, de formuler quelques suggestions sur la place de cette technique. Il a été recensé 634 ALR, dont 96% chez des adultes. Les membres inférieurs sont les plus concernés (76%). Des anesthésies rachidiennes ont été pratiquées chez 32 patients dont 4 enfants. Les incidents sont peu fréquents (3%) et sans gravité. L’ALR peut représenter une option utile dans la stratégie multimodale de prise en charge de la douleur, la réhabilitation passive précoce et la chirurgie de recouvrement par la greffe de peau. Elle mérite d’être explorée en ambulatoire, dans la mesure où 95% des brûlés ne sont pas hospitalisés. La place de l’anesthésie-locorégionale chez les brûlés devrait susciter plus d’intérêts, pour permettre d’établir des protocoles fondés sur une réflexion pluridisciplinaire. PMID:27279806

  13. Summary Report For The Analysis Of The Sludge Batch 7b (Macrobatch 9) DWPF Pour Stream Glass Sample For Canister S04023

    SciTech Connect

    Johnson, F. C.

    2013-11-18

    In order to comply with the Defense Waste Processing Facility (DWPF) Waste Form Compliance Plan for Sluldge Batch 7b, Savannah River National Laboratory (SRNL) personnel characterized the Defense Waste Processing Facility (DWPF) pour stream (PS) glass sample collected while filling canister S04023. This report summarizes the results of the compositional analysis for reportable oxides and radionuclides and the normalized Product Consistency Test (PCT) results. The PCT responses indicate that the DWPF produced glass that is significantly more durable than the Environmental Assessment glass.

  14. BWRSAR (Boiling Water Reactor Severe Accident Response) calculations of reactor vessel debris pours for Peach Bottom short-term station blackout

    SciTech Connect

    Hodge, S.A.; Ott, L.J.

    1988-01-01

    This paper describes recent analyses performed by the BWR Severe Accident Technology (BWRSAT) Program at Oak Ridge National Laboratory to estimate the release of debris from the reactor vessel for the unmitigated short-term station blackout accident sequence. Calculations were performed with the BWR Severe Accident Response (BWRSAR) code and are based upon consideration of the Peach Bottom Atomic Power Station. The modeling strategies employed within BWRSAR for debris relocation within the reactor vessel are briefly discussed and the calculated events of the accident sequence, including details of the calculated debris pours, are presented. 4 refs., 13 figs., 3 tabs.

  15. Éthique de la recherche en santé mondiale : la relation Nord-Sud, quel partenariat pour quelle justice sociale ?

    PubMed

    Godard, Béatrice; Hunt, Matthew; Moube, Zéphirin

    2014-03-01

    La recherche en santé mondiale s'inscrit dans une volonté de mobiliser des connaissances au service d'interventions et de politiques publiques pour l'atteinte équitable du bien-être commun, notamment en matière de santé. Elle joue un rôle primordial en ce sens, en favorisant l'implication des communautés et leur autonomisation et de nombreuses lignes directrices supportent un tel partenariat. Néanmoins, certains enjeux éthiques sont liés au financement de la recherche, aux environnements de recherche, à la priorisation des problématiques de recherche, aux mécanismes d'évaluation éthique posent souvent un problème de justice sociale au niveau de la redistribution des ressources et de la reconnaissance des différences culturelles. Comment alors déterminer quelle est la façon « idéale » d'agir en tenant compte de la globalité des individus et du pluralisme culturel des sociétés pour « bien faire », pour satisfaire l'exigence de l'équité? Une réflexion et une démarche éthique demeurent essentielles, ainsi qu'un dialogue entre les chercheurs du Nord et du Sud, et leurs autres partenaires que sont les décideurs, les responsables locaux et les communautés. Un tel dialogue, établi dans un continuum du développement de projets de recherche à leur pérennité, peut grandement contribuer à limiter les problèmes de justice sociale et à viser un développement plus égalitaire des savoirs scientifiques. Plusieurs chercheurs se sont déjà engagés dans cette voie, et leurs initiatives devraient être encouragées pour mettre les nouveaux savoirs au service des populations. PMID:24594489

  16. Conception et calibration d'un sonoreacteur pour l'oxydation de la cellulose par le systeme TEMPO/NaOCl/NaBr

    NASA Astrophysics Data System (ADS)

    Paquin, Michel

    Avec le contexte economique actuel dans le domaine des pates et papiers au Canada, l'industrie se doit de diversifier ses produits mis en marche. La fermeture de plus de 20 usines depuis 2005, une baisse du PIB de l'industrie de 1,4 milliard CAD entre 1999--2008, une baisse de la demande de 2,4 %, une diminution du prix de la pate de 20,9 % depuis juillet 2009. La delocalisation du secteur vers l'Asie et l'hemisphere sud sont autant de raisons pour laquelle l'industrie se doit d'etre a l'avant plan de nouvelle technologie a base de fibre de bois. Pour augmenter leur rentabilite, l'industrie se doit de diversifier ses produits dans d'autres secteurs que le simple fabricant de papier impression-ecriture. Sa diversification passe par l'elaboration de nouveaux papiers a valeur ajoutee (papier conducteur, papier bioactif, etc.), par l'utilisation de la biomasse forestiere pour la production d'energie, par l'utilisation de la biomasse forestiere pour l'elaboration d'une plateforme de chimie verte, par l'utilisation de la lignine pour le developpement de polymeres et par l'utilisation de la fibre cellulosique pour la fabrication de nanomateriaux. La fabrication de nanofibrille de cellulose peut devenir un des produits qui servira a diversifier la production des usines de pates et papiers. Les nanofibrilles de cellulose possedent des proprietes mecaniques et chimiques exceptionnelles. Les nanofibrilles de cellulose sont fabriquees a partir d'une oxydation selective de la pate kraft de feuillu avec le systeme TEMPO-NaOCl-NaBr. L'oxydation selective de l'alcool primaire en C6 du monomere de glucose sous forme de carboxylates engendre une modification chimique de la cellulose qui accroit l'hydrophilicite des fibrilles. Suite a cette oxydation, nous devons effectuer une desintegration mecanique de la fibre kraft de feuillu oxydee pour separer les fibrilles. Le processus d'oxydation de la fibre par le systeme TEMPO-NaOCl-NaBr et sa defibrillation par la suite engendre une

  17. Effect of an auditory feedback substitution, tactilo-kinesthetic, or visual feedback on kinematics of pouring water from kettle into cup.

    PubMed

    Portnoy, Sigal; Halaby, Orli; Dekel-Chen, Dotan; Dierick, Frédéric

    2015-11-01

    Pouring hot water from a kettle into a cup may prove a hazardous task, especially for the elderly or the visually-impaired. Individuals with deteriorating eyesight may endanger their hands by performing this task with both hands, relaying on tactilo-kinesthetic feedback (TKF). Auditory feedback (AF) may allow them to perform the task singlehandedly, thereby reducing the risk for injury. However since relying on an AF is not intuitive and requires practice, we aimed to determine if AF supplied during the task of pouring water can be used naturally as visual feedback (VF) following practice. For this purpose, we quantified, in young healthy sighted subjects (n = 20), the performance and kinematics of pouring water in the presence of three isolated feedbacks: visual, tactilo-kinesthetic, or auditory. There were no significant differences between the weights of spilled water in the AF condition compared to the TKF condition in the first, fifth or thirteenth trials. The subjectively-reported difficulty levels of using the TKF and the AF were significantly reduced between the first and thirteenth trials for both TKF (p = 0.01) and AF (p = 0.001). Trunk rotation during the first trial using the TKF was significantly lower than the trunk rotation while using VF. Also, shoulder adduction during the first trial using the TKF was significantly higher than the shoulder adduction while using the VF. During the AF trials, the median travel distance of the tip of the kettle was significantly reduced in the first trials so that in the thirtieth trial it did not differ significantly from the median travel distance during the thirtieth trial using TKF and VF. The maximal velocity of the tip of the kettle was constant for each of the feedback conditions but was higher in 10 cm s(-1) using VF than TKF, which was higher in 10 cm s(-1) from using AF. The smoothness of movement of the TKF and AF conditions, expressed by the normalized jerk score (NJSM), was one and two orders

  18. Prise de suppléments multivitaminiques pour la prévention primaire des anomalies congénitalies

    PubMed Central

    Morin, Pascale; Demers, Karine; Giguère, Christine; Tribble, Denise St-Cyr; Lane, Julie

    2007-01-01

    RÉSUMÉ OBJECTIF Déterminer si les recommandations véhiculées par les professionnels de la santé sur l’importance de l’acide folique encouragent les femmes susceptibles de procréer de prendre les suppléments d’acide folique. CONCEPTION Enquête. CONTEXTE Centre de santé et de services sociaux, Institut universitaire de gériatrie de Sherbrooke, à Sherbrooke, Qué. PARTICIPANTS 323 femmes francophones âgées entre 18 et 45 ans. PRINCIPALES MESURES DES RÉSULTATS La consommation de suppléments de vitamines et de minéraux au cours de la dernière année. Des analyses statistiques descriptives et bivariées et une modélisation par régression logistique ont été effectuées pour déterminer si l’association observée entre la recommandation d’un professionnel de la santé et la consommation de vitamines et de minéraux persistait après avoir tenu compte de l’effet des variables de contrôle (consultation de documentation, connaissances, sources d’information, perception, âge, scolarité, revenu, état matrimonial, intention de devenir enceinte). RÉSULTATS Environ 41% des femmes rapportent que leur médecin leur avait recommandé de consommer un supplément de vitamines et de minéraux. Après avoir ajusté toutes les variables dans le modèle, il est apparu que le fait de se faire recommander par un professionnel de la santé de prendre un supplément de vitamines et de minéraux était significativement associé à la consommation de vitamines et de minéraux par les femmes susceptibles de devenir enceintes. CONCLUSION Les professionnels peuvent améliorer la santé de la population par une pratique clinique préventive. Nous soulignons l’importance de soutenir ces derniers dans leurs efforts d’intégrer puis d’appliquer des connaissances scientifiques dans leur pratique. PMID:18077754

  19. The efficacy and safety of alphacypermethrin as a pour-on treatment for water buffalo (Bubalus bubalis) infested with Haematopinus tuberculatus (Phthiraptera: Haematopinidae).

    PubMed

    Veneziano, Vincenzo; Neglia, Gianluca; Cimmino, Roberta; Balestrieri, Anna; Rufrano, Domenico; Bastianetto, Eduardo; Santoro, Mario; Gokbulut, Cengiz

    2013-08-01

    The sucking louse Haematopinus tuberculatus (Burmeister 1839) is an ectoparasite of buffaloes, cattle, camels, and American bison. Alphacypermethrin (ACYP) is a pyrethroid insecticide commonly used to control arthropods of veterinary and public health interest. Therapeutics, such as antiparasitic compounds, is often administered to buffaloes based on dosage and intervals recommended for cattle because very few drugs have buffalo-specific label indications. A trial was conducted on 20 louse-infested buffaloes at a farm to assess the efficacy and safety of ACYP pour-on, at the manufacturer's recommended dose for cattle, on buffaloes naturally infested by H. tuberculatus. Ten animals were assigned to ACYP-treated group (ACYP-group) and ten to untreated control group (C-group). On day 0, all ACYP-group buffaloes received alphacypermethrin pour-on. Louse counts were performed on days -1, 7, 14, 21, 28, 35, 42, 49, and 56 at eight predilection sites on the skin of each buffalo. ACYP was completely effective (100%) at day 7, highly effective (99.8%) at day 14, and completely effective (100%) from day 21 until the end of the study (day 56 post-treatment). During the trial, ACYP was well tolerated by all animals as there were no observed clinically adverse reactions. The results of this trial suggest that ACYP is an effective, safe, and user-friendly compound suitable for treatment of buffaloes with natural louse infestations. PMID:23733232

  20. Consensus formalisé: recommandations de pratiques cliniques pour la prise en charge de la lombalgie aiguë du patient africain

    PubMed Central

    Elleuch, Mohamed; El Maghraoui, Abdellah; Griene, Brahim; Nejmi, Mati; Ndongo, Souhaibou; Serrie, Alain

    2015-01-01

    La lombalgie aiguë est la pathologie rhumatismale la plus fréquente en Afrique. L’épidémiologie et la présentation clinique ne diffèrent pas de celles observées sur les autres continents. En revanche, les aspects psycho-sociaux, la disponibilité des traitements, l'accès aux soins et le poids culturel des médecines traditionnelles sont autant de spécificités qui ont conduit à la réalisation du 1er consensus d'experts en rhumatologie pour la prise en charge du patient africain. Destiné aux praticiens, ce travail collaboratif multinational a pour objectif de fournir 11 recommandations de pratiques cliniques simples, fondées sur les preuves, et adaptées aux conditions de l'exercice médical en Afrique. Leur ambition est d'améliorer la prise en charge de la lombalgie aigue par une évaluation initiale clinique pertinente, une diminution des examens radiologiques inutiles, une prescription médicamenteuse adéquate et l'abandon de procédures invasives inappropriées. PMID:26955427

  1. Fistule artério-veineuse ulno-basilique pour hémodialyse au CHU de Yaoundé: à propos de deux cas

    PubMed Central

    Guifo, Marc Leroy; Kaze, Francois Folefak; Ndoumbe, Aurélien; Halle, Marie Patrice; Bitang, Louis Joss; Pisoh, Christopher Tagnyin; Takongmo, Samuel

    2013-01-01

    La fistule ulno-basilique est une éventualité peu sollicitée dans le choix des abords vasculaires pour hémodialyse. Elle est construite sur la veine basilique qui est souvent la seule veine épargnée par les ponctions veineuses de routine dans les services de médecine. De par l'existence de nombreuses complications comme l'infection des prothèses et des cathéters centraux, les thromboses, les patients hémodialysés chroniques nécessitent plus d'un accès veineux au cours de leur suivi médical. Les fistules artério-veineuses natives présentent moins de risques de complications que les prothèses d'une façon générale et une plus longue durée de vie. La confection d'une fistule sur une topographie proximale compromet le recourt à cette veine sur une localisation distale ultérieurement. Il existe donc une hiérarchisation dont il faut tenir compte pour une utilisation optimale du capital veineux disponible. Nous rapportons ici deux observations concernant des patients chez qui deux fistules ulno-basiliques ont été réalisées avec succès au CHU de Yaoundé. PMID:24244789

  2. Developpement et application d'un systeme mobile de laser terrestre pour quantifier le bilan sedimentaire des plages

    NASA Astrophysics Data System (ADS)

    Van-Wierts, Stefanie

    Au Québec maritime, l'érosion côtière est une problématique d'envergure, notamment sur les côtes de formations meubles. Les plages ont un rôle de zone tampon ayant comme fonction naturelle d'absorber l'énergie des vagues et donc d'assurer l'équilibre de certains écosystèmes et le maintien de l'écoumène en réduisant l'érosion de la côte. Les méthodes d'acquisition conventionnelles ne permettent pas de quantifier convenablement les changements morphosédimentaires d'une plage à l'échelle des cellules hydrosédimentaires. Le manque de méthode d'acquisition fiable et de données quantitatives mène à une surestimation ou à une sous-estimation de la disponibilité sédimentaire d'un système côtier. Pour contrer ces lacunes et afin de minimiser les coûts d'acquisition, un nouveau système mobile de LiDAR terrestre a été mis en place, permettant d'acquérir des données topographiques de l'estran, de la haute plage et des falaises. Le système multicapteurs comprend un LiDAR, un système de navigation à haute précision (IMU et D-GPS) et une caméra. L'ensemble des instruments et capteurs sont montés sur un véhicule de type tout-terrain. Le système a été évalué sur la zone côtière de la péninsule de Manicouagan. La comparaison des données LiDAR avec 1 050 points de référence géopositionnés au D-GPS montre une erreur verticale moyenne de 0,1 m sur les secteurs de plage. Les résultats montrent que le volume sédimentaire moyen des plages devant les zones où la ligne de rivage présente un ouvrage de protection en enrochement (12 m 3/m) est plus de trois fois plus faible que devant les secteurs à l'état naturel (35,5 m3/m). La moyenne des secteurs en transition, constituant les segments où une zone artificielle et une zone naturelle se chevauchent présentent un volume moyen de 28 m3/m. Aussi, les plages devant les secteurs anthropisés sont en moyenne près de 2 fois plus étroites (12,7 m) que devant les secteurs naturels (25

  3. Pouring on the steam

    SciTech Connect

    Valenti, M.

    1996-02-01

    Engineers at Solar Turbines Inc. in San Diego have achieved a breakthrough in steam power by using modern gas-turbine technology, high-temperature-resistant superalloys, advanced manufacturing technologies, and a new class of steam generators to build a high-performance steam system (HPSS). The system is a full-scale, 4-megawatt industrial prototype steam power plant that produces steam heated to 1,500 F and pressurized to 1,500 psig. In a cogeneration steam cycle, these temperatures and pressures can double the power generated using the same amount of steam, according to the US Department of Energy (DOE), which sponsored the project as part of the Advanced Turbine System Program.

  4. Developpement d'outils quantitatifs pour le suivi par imagerie TEP/TDM de la reponse a la chimiotherapie et de sa toxicite

    NASA Astrophysics Data System (ADS)

    Croteau, Etienne

    L'objectif de ce projet de doctorat est de developper des outils quantitatifs pour le suivi des traitements de chimiotherapie pour le cancer du sein et de leurs effets cardiotoxiques a l'aide de l'imagerie TEP dynamique. L'analyse cinetique en TEP dynamique permet l'evaluation de parametres biologiques in vivo. Cette analyse peut etre utilise pour caracteriser la reponse tumorale a la chimiotherapie et les effets secondaires nefastes qui peuvent en resulter. Le premier article de cette these decrit la mise au point des techniques d'analyse cinetique qui utilisent la fonction d'entree d'un radiotraceur derive de l'image dynamique. Des corrections de contamination radioactive externe (epanchement) et de l'effet de volume partiel ont ete necessaires pour standardiser l'analyse cinetique et la rendre quantitative. Le deuxieme article porte sur l'evaluation d'un nouveau radiotraceur myocardique. Le 11C-acetoacetate, un nouveau radiotraceur base sur un corps cetonique, a ete compare au 11C-acetate, couramment utilise en imagerie cardiaque TEP. L'utilisation de 3H-acetate et 14C-acetoacetate ont permis d'elucider la cinetique de ces traceurs depuis la fonction d'entree et la captation par les mitochondries cardiaques qui reflete la consommation en oxygene, jusqu'a la liberation de leurs principaux metabolites reciproques (3H20 et 14CO2). Le troisieme et dernier article de cette these presente l'integration d'un modele qui evalue la reserve cardiaque de perfusion et de consommation en oxygene. Un modele de cardiomyopathie a ete etabli a l'aide d'un agent chimiotherapeutique contre le cancer du sein, la doxorubicine, reconnu comme etant cardiotoxique. Un protocole de repos/effort a permis d'evaluer la capacite d'augmentation de perfusion et de consommation en oxygene par le coeur. La demonstration d'une reserve cardiaque reduite caracterise la cardiotoxicite. La derniere contribution de cette these porte sur la mise au point de methodes peu invasives pour mesurer la

  5. Evaluation of the comparative efficacy of a moxidectin plus triclabendazole pour-on solution against adult and immature liver fluke, Fasciola hepatica, in cattle.

    PubMed

    Geurden, Thomas; Bartram, David; Van Brussel, Leen; Bo, Liu; Scott-Baird, Emer; Rugg, Douglas

    2012-10-26

    The objective of this study was to evaluate the efficacy of a pour-on solution containing moxidectin plus triclabendazole (MOX plus TCBZ) against immature and adult stages of the liver fluke in cattle and compare the efficacy with other commercially available preparations. To this end, 104 male Holstein-Friesian calves aged between 3 and 4 months, were randomly allocated to 13 groups of eight animals each, and infected with approximately 500 Fasciola hepatica metacercariae. One group remained untreated, four groups were treated with MOX plus TCBZ at a dose rate of 0.1 mL/kg, four other groups were treated with ivermectin (IVM) plus clorsulon injectable at a dose rate of 0.02 mL/kg, and the remaining four groups were treated with IVM plus closantel pour-on at a dose rate of 0.1 mL/kg. Each treatment was applied to one of the groups at 4 weeks, 6 weeks, 8 weeks and 12 weeks after the experimental infection. At necropsy (99-102 days after infection), all untreated animals were infected with a minimum of 30 flukes. The MOX plus TCBZ treated animals had significantly (P<0.0001) lower fluke counts compared to the untreated control animals at all time points after treatment. Efficacy against 8-week old and adult flukes was >99.5%. For 6-week old immature fluke, the efficacy was 98.0% and for 4-week old immature fluke the efficacy was 90.9%. The IVM plus closantel pour-on treated animals had significantly lower fluke counts compared to the untreated control animals for adult and 8-week old flukes (P<0.0001), and for 6-week old flukes (P=0.002). The efficacy was 26.8%, 68.2%, 90.6% and 99.3% against 4-week, 6-week and 8-week old immature flukes, and adult flukes respectively. The IVM plus clorsulon treated animals had significantly lower fluke counts compared to the untreated control animals for adult (P<0.0001) and 8-week old (P<0.05) flukes. The efficacy was 29.7%, 43.4%, 53.2% and 99.2% against 4-week, 6-week and 8-week old immature flukes, and adult flukes respectively

  6. ANALYSIS OF SLUDGE BATCH 4 (MACROBATCH 5) FOR CANISTER S02902 AND SLUDGE BATCH 5 (MACROBATCH 6) FOR CANISTER S03317 DWPF POUR STREAM GLASS SAMPLES

    SciTech Connect

    Reigel, M.; Bibler, N.

    2010-10-04

    The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 4 (SB4), Macrobatch 5 (MB5) on May 29, 2007. Sludge Batch 4 was a blend of the heel of Tank 40 from Sludge Batch 3 (SB3) and SB4 material qualified in Tank 51. On November 28, 2008, DWPF began processing Sludge Batch 5 (SB5) from Tank 40 which is a blend of the heel of Tank 40 from SB4, SB5 material qualified in Tank 51 and H-Canyon Pu and Np transfers. SB4 was processed using Frit 510 and SB5 used Frit 418. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. During the processing of SB4 and SB5, glass samples were obtained during the pouring of canisters S02902 and S03317, respectively. The samples were transferred to the Savannah River National Laboratory (SRNL) where they were analyzed (durability, chemical and radionuclide composition). The following observations and conclusions are drawn from the analytical results provided in this report: (1) The sum of the oxides for the chemical composition of both the SB4 and SB5 pour stream glasses is within the Product Composition Control System (PCCS) acceptance limits (95 {le} sum of oxides {le} 105). (2) The calculated Sludge Dilution Factor (SDF) for SB4 is 2.52. The measured radionuclide content is in good agreement with the calculated values from the dried sludge results from the SB4 Waste Acceptance Production Specification (WAPS) sample (References 1 and 19). (3) The calculated SDF for SB5 is 2.60. The measured radionuclide content is in good agreement with the calculated values from the dried sludge results from the SB5 WAPS sample (References 2 and 20). (4) Scanning Electron Microscopy (SEM) analysis shows there are noble metal inclusions, primarily ruthenium, present in both pour stream samples. (5) The Product

  7. Les déterminants du statut “perdu de vue” chez les patients pris en charge pour cancer au Maroc: situation avant le Plan Cancer

    PubMed Central

    Najdi, Adil; Berraho, Mohamed; Bendahhou, Karima; Obtel, Majdouline; Zidouh, Ahmed; Errihani, Hassan; Nejjari, Chakib

    2014-01-01

    Introduction Le cancer au Maroc représente un problème majeur de santé publique, sa prise en charge doit être globale, active et complète pour tous les patients. L'objectif de ce travail était d'estimer la fréquence des perdus de vue « PDV » en oncologie au Maroc durant la première année de suivi et de déterminer les facteurs associés à ce problème. Méthodes Par une étude rétrospective portant sur 2854 dossiers de malades hospitalisés dans les trois principaux centres d'oncologie au Maroc depuis janvier 2003 jusqu’à juin 2007 et concernant les cinq principales localisations de cancer au Maroc, nous avons cherché la date des dernières nouvelles des patients ayant un recul de 18 mois minimum afin de déterminer le statut de ces malades après un an de suivi. Résultats La moyenne d’âge était de 52±14 ans, une proportion féminine de 63%, les sujets actifs constituaient 28%, les mariés 71%, les analphabètes 51%, 70% des patients habitaient en milieu urbain et seulement 11% des malades disposaient d'une couverture sociale. La localisation cancéreuse la plus fréquente était le poumon (23,8%) suivie du colon-rectum (23,5%) puis le col (21,9%), le sein (20,4%) et les lymphomes (10,4%). Le taux des «PDV» à un an de suivi était de 48%, ce statut était significativement lié au sexe, à l’âge, au NSE et au statut matrimonial. Sur le plan médical, le statut «PDV» était lié à la localisation du cancer, au stade de diagnostic et au type de traitement reçu. Conclusion Notre étude a mis en évidence la grande ampleur du problème des PDV en cancérologie au Maroc ainsi que ces déterminants. Ces résultats incitent tous les acteurs dans le domaine de la cancérologie à collaborer ensemble pour prendre les mesures qui s'imposent pour y pallier PMID:25400850

  8. Effect of nanoparticles on the structure and properties of an aluminum alloy poured into a mould with the use of a magnetohydrodynamic disk pump

    NASA Astrophysics Data System (ADS)

    Katsnelson, S. S.; Pozdnyakov, G. A.; Cherepanov, A. N.

    2015-09-01

    The influence of two nanomodifiers with different compositions during their homogenization in the AL7 aluminum melt and moulding on the properties of the modified aluminum alloy is studied. Experiments are performed with the use of a centrifugal conductive magnetohydrodynamic pump. The melt is poured into a graphite mould with three cylindrical channels 38 mm in diameter and 160 mm long, which are designed for a metal mass of 500 g. Two compositions are used as modifying agents: nano-scale particles of the aluminum nitride powder 40-100 nm in size and metallized carbon nanotubes smaller than 25 nm, which are clad with aluminum to improve wetting of their surface. The analysis of the structure of the experimental and reference samples shows that the use of modifiers leads to refinement of the grain structure of the cast metal. According to the Hall-Petch theory, this effect may result in improvement of mechanical characteristics of the cast metal.

  9. Systèmes d'imagerie à haute résolution dans le domaine des Rayons X pour le Laser Mégajoule

    NASA Astrophysics Data System (ADS)

    Champeaux, J.-Ph.; Troussel, Ph.; Boutin, J.-Y.; Lidove, G.; Marmoret, R.; Soullié, G.; Rosch, R.

    2006-12-01

    Le principe de la fusion par confinement inertiel consiste à faire imploser une cible sphérique de petite taille, millimétrique, remplie d'un mélange de deutérium et de tritium sous l'action des 240 faisceaux lasers impulsionnels de très grande puissance du LMJ. Les études de cette physique d'implosion (mise en vitesse, symétrie d'implosion, instabilités hydrodynamiques) et de l'allumage (traceurs, point chaud) font appel aux techniques de l'imagerie et de la radiographie à haute résolution spatiale (μm) et temporelle (ps) avec sélection spectrale dans le domaine d'énergie de photons comprise entre 100 eV et 20 keV. Plusieurs Systèmes d'Imagerie X (SIX), à haute résolution spatiale, ont donc été développés par le CEA-DIF et mis en œuvre sur la Ligne d'Intégration Laser (LIL) implantée au CEA-CESTA. Dans cet article nous présentons les principaux SIX, à base de microscopes à miroirs. Un exemple de microscope prototype nommé PIXEL (Plasma Imageur X pour les Expériences Lasers) développé pour le LMJ est présenté. Nous portons l'accent sur les problèmes technologiques liés à l'environnement LMJ.

  10. Application of Flumethrin Pour-On on Reservoir Dogs and Its Efficacy against Sand Flies in Endemic Focus of Visceral Leishmaniasis, Meshkinshahr, Iran

    PubMed Central

    Jalilnavaz, Mohammad Reza; Abai, Mohammad Reza; Vatandoost, Hassan; Mohebali, Mehdi; Akhavan, Amir Ahmad; Zarei, Zabihollah; Rafizadeh, Sayena; Bakhshi, Hassan; Rassi, Yaver

    2016-01-01

    Background: Visceral leishmaniasis (VL) is one of the most important parasitic zoonotic diseases in the world. Domestic dogs are the main domestic reservoirs of VL in endemic foci of Iran. Various methods, including vaccination, treatment of dogs, detection and removal of infected dogs have different results around the world. General policy on control of canine visceral leishmaniasis is protection of them from sand fly bites. The aim of this study was evaluation of pour-on application of flumethrin on dogs against blood-feeding and mortality of field-caught sand flies. Methods: Once every 20 days from May untill September 2013, the treated and control dogs were exposed with field caught sandflies for 2 hours under bed net traps. After the exposure time, both alive and dead sand flies were transferred in netted cups to the laboratory. The mortality rate of them was assessed after 24 hours. The blood-fed or unfed conditions were determined 2 hours after exposure to the dogs under stereomicroscope. Results: The blood feeding index was varied from 12.0 to 25.0 % and 53.0 to 58.0 % for treated and control dogs respectively (P< 0.0001). The blood feeding inhibition was 75.0–87.0 % and 41.0–46.0 % for the control and treated dogs (P< 0.0001), respectively.The total mortality rate was 94.0–100 % and 19.0–58.0 % respectively for the treated and control groups (P< 0.001). Conclustion: Application of pour-on flumethrin on dogs caused 90–100 % mortality until 2.5 month and inhibited the blood-feeding of sand flies. PMID:27047974

  11. Influence du comportement des accompagnants sur le vécu des patients admis pour hémorragies digestives hautes au CHU campus de Lomé (Togo)

    PubMed Central

    Bagny, Aklesso; Dusabe, Angelique; Bouglouga, Oumboma; Lawson-ananisoh, Mawuli Late; Kaaga, Yeba Laconi; Djibril, Mohaman Awalou; Soedje, Kokou Mensah; Dassa, Simliwa Kolou; Redah, Datouda

    2014-01-01

    Introduction L'hémorragie digestive haute est une urgence, qui constitue souvent pour les patients un danger mortel suscitant inquiétude et agitation. Dans cet état, le patient dépend de ses accompagnants pour ses soins et pour honorer le traitement; mais souvent, il a été observé une discordance entre l'urgence et les comportements des accompagnants. Le but de cette étude était de décrire les facteurs socioéconomiques et psychologiques pouvant influencer les comportements des accompagnants des patients admis pour HDH, estimer l'indice de relation entre ces comportements et les facteurs associés d'une part et le vécu des patients admis pour HDH d'autre part. Méthodes Il s'agit d'une étude prospective menée de Septembre 2010 à Juin 2011 (soit 10 mois). Nous avions utilisé l'entretien semi-dirigé et l'observation directe pour collecter nos données, ces dernières avaient été traitées par les méthodes statistiques et d'analyse de contenu. Résultats Dans la présente étude, les comportements des accompagnants des patients admis pour HDH sont en majorité marqués par l'abandon (84%) et le manque de sollicitude (80,2%). Ces comportements sont souvent stimulés par les facteurs socioéconomiques tels que les difficultés économiques (83,2%), des conflits intrafamiliaux (85,1%) et des représentations (maladie incurable ou envoûtement) de la maladie par les accompagnants (73,3%) des cas. Quant aux patients, ils vivent ces comportements comme étant des menaces de mort ou des rejets (77,20%) et comme étant une dévalorisation ou une humiliation de la part de leurs accompagnants (70,30%). Les résultats confirment l'existence de lien significatif entre les comportements des accompagnants et les facteurs socio économiques, entre les comportements des accompagnants et des facteurs psychologiques, et entre le vécu des patients admis pour l'HDH et les comportements des accompagnants. Conclusion Des études ultérieures devraient aborder les points

  12. Le domaine des co-infections et des maladies concomitantes du Réseau canadien pour les essais VIH des IRSC : lignes directrices canadiennes pour la prise en charge et le traitement de la co-infection par le VIH et l’hépatite C chez les adultes

    PubMed Central

    Hull, Mark; Giguère, Pierre; Klein, Marina; Shafran, Stephen; Tseng, Alice; Côté, Pierre; Poliquin, Marc; Cooper, Curtis

    2014-01-01

    HISTORIQUE : De 20 % à 30 % des Canadiens qui vivent avec le VIH sont co-infectés par le virus de l’hépatite C (VHC), lequel est responsable d’une morbidité et d’une mortalité importantes. La prise en charge du VIH et du VHC est plus complexe en raison de l’évolution accélérée de la maladie hépatique, du choix et des critères d’initiation de la thérapie antirétrovirale et du traitement anti-VHC, de la prise en charge de la santé mentale et des toxicomanies, des obstacles socioéconomiques et des interactions entre les nouvelles thérapies antivirales à action directe du VHC et les antirétroviraux OBJECTIF : Élaborer des normes nationales de prise en charge des adultes co-infectés par le VHC et le VIH dans le contexte canadien. MÉTHODOLOGIE : Le Réseau canadien pour les essais VIH des Instituts de recherche en santé du Canada a réuni un groupe d’experts possédant des compétences cliniques en co-infection par le VIH et le VHC pour réviser les publications à jour ainsi que les lignes directrices et les protocoles en place. Après une vaste sollicitation afin d’obtenir des points de vue, le groupe de travail a approuvé des recommandations consensuelles, qu’il a caractérisées au moyen d’une échelle de qualité des preuves fondée sur la classe (bienfaits par rapport aux préjudices) et sur la catégorie (degré de certitude). RÉSULTATS : Toutes les personnes co-infectées par le VIH et le VHC devraient subir une évaluation en vue de recevoir un traitement du VHC. Les personnes qui ne sont pas en mesure d’entreprendre un traitement du VHC devraient être soignées pour le VIH afin de ralentir l’évolution de la maladie hépatique. La norme de traitement du VHC de génotype 1 est un régime comprenant de l’interféron pégylé et de la ribavirine dosée en fonction du poids, associés à un inhibiteur de la protéase du VHC. Pour les génotypes 2 ou 3, une bithérapie classique est recommandée pendant 24 semaines s

  13. Effect of pour-on alphacypermethrin on feed intake, body condition score, milk yield, pregnancy rates, and calving-to-conception interval in buffaloes.

    PubMed

    Bifulco, G; Veneziano, V; Cimmino, R; Esposito, L; Auletta, L; Varricchio, E; Balestrieri, A; Claps, S; Campanile, G; Neglia, G

    2015-04-01

    The aims of this study were to assess the efficacy of alphacypermethrin (ACYP) on pediculosis due to Haematopinus tuberculatus and to evaluate the influence of the treatment on productive and reproductive performance in buffaloes (Bubalus bubalis) reared in an intensive system. The trial was performed on 56 pluriparous buffaloes at 86.8 ± 8.1 d in milk. The animals underwent individual louse count and were divided into 2 homogenous groups according to louse count, age, number of lactations, days in milk, live BW, BCS, pregnancy status, and milk yield. Group A (n = 28) was treated by a pour-on formulation of ACYP, and Group S (n = 28) was treated by pour-on saline solution. Individual louse counts were performed weekly on 10 buffaloes in each group. Feed intake was recorded daily and the total mixed ration, individual ingredients, and orts were analyzed to calculate DM ingestion. Individual milk yield was recorded daily and milk samples were analyzed at the beginning of the trial, after 4 wk, and at the end of the trial to assess milk composition. Individual BCS was also evaluated simultaneously. Finally, the animals underwent synchronization of ovulation starting 4 wk after treatment and the pregnancy rate and the calving-conception interval were evaluated. Data were analyzed by the Mann-Whitney test and ANOVA for repeated measures. The infestation was constant in Group S, whereas no lice were present in Group A throughout the study. Daily DMI was similar in the 2 groups (16.7 ± 0.4 vs. 16.3 ± 0.3 kg/d in Group A vs. Group S, respectively), although buffaloes in Group A showed higher (P < 0.05) BCS score at the end of the trial (7.39 ± 0.1 vs. 7.14 ± 0.1 in Group A vs. Group S, respectively). The average milk yield/buffalo was higher (P < 0.05) in Group A compared to Group S (10.58 ± 0.1 vs. 10.39 ± 0.1 kg in Group A vs. Group S, respectively) and this was mainly due to the higher milk production recorded in buffaloes at less than 75 d in milk (11.81 ± 0

  14. Approche structurée en pratique familiale pour les patients ayant des problèmes de mémoire

    PubMed Central

    Lee, Linda; Weston, W. Wayne; Heckman, George; Gagnon, Micheline; Lee, F. Joseph; Sloka, Scott

    2013-01-01

    Résumé Objectif Présenter aux médecins de famille une approche structurée pour les patients qui présentent des problèmes de mémoire. Sources des données Cette approche se fonde sur un programme agréé de formation clinique sur la mémoire, élaboré par le Centre for Family Medicine Memory Clinic en partenariat avec le Collège des médecins de famille de l’Ontario. Message principal Le recours à une approche structurée de raisonnement clinique peut aider les médecins à poser un diagnostic exact chez des patients qui présentent des problèmes de mémoire. Le délirium, la dépression et les causes réversibles doivent être exclus, pour ensuite faire une différenciation entre le vieillissement cognitif normal, la déficience cognitive légère et la démence. Il est essentiel de procéder à une anamnèse collatérale et à une évaluation fonctionnelle exacte. Les formes courantes de la démence peuvent être cliniquement différenciées par la séquence dans laquelle les symptômes apparaissent et par la façon dont les déficits cognitifs évoluent avec le temps. Habituellement, les signes précoces de la démence d’Alzheimer comportent une déficience de la mémoire épisodique, tandis que la démence due principalement à des causes vasculaires peut se présenter par une perte précoce de la fonction exécutive et de la fonction visuospatiale, ainsi que des caractéristiques cliniques particulières. Conclusion Une approche de raisonnement clinique peut aider les médecins à poser des diagnostics précoces et exacts qui peuvent orienter une prise en charge appropriée et améliorer les soins aux patients qui ont des problèmes de mémoire.

  15. Validation de la traduction française de la SURPS pour une population d’adolescents québécois

    PubMed Central

    Castonguay-Jolin, Laura; Perrier-Ménard, Eveline; Castellanos-Ryan, Natalie; Parent, Sophie; Vitaro, Frank; Tremblay, Richard E; Garel, Patricia; Séguin, Jean R; Conrod, Patricia J

    2013-01-01

    Objectif La Substance Use Risk Profile Scale (SURPS) est un instrument de dépistage des caractéristiques de personnalité qui représentent un risque pour le développement d’une consommation problématique de substances. La SURPS comporte 23 items évaluant 4 dimensions et permet aux intervenants en santé mentale de mieux cibler la prévention. La SURPS a été validée au Canada anglais, au Royaume-Uni, en Chine et au Sri Lanka; l’objectif de cette étude est de valider une traduction française de la SURPS pour des adolescents francophones québécois, en plus d’en tester la sensibilité dans une population clinique. Méthode Deux cent deux jeunes de 15 ans d’un échantillon communautaire ont répondu à la SURPS et à des mesures de la personnalité et de l’utilisation de substances. La cohérence interne, la solution factorielle et la validité concomitante de l’échelle ont été évaluées. Quarante adolescents (âge moyen de 15,7 ans) présentant un diagnostic psychiatrique ont également répondu à la SURPS et les scores ont été comparés aux normes de l’échantillon communautaire. Résultats La traduction française de la SURPS démontre une bonne cohérence interne ainsi qu’une solution factorielle à 4 facteurs semblable à la version originale. Ses 4 souséchelles ont une bonne validité concomitante. De plus, 3 de ses souséchelles sont corrélées avec des mesures relatives à la consommation de substances psychoactives. Finalement, 95 % des participants de l’échantillon clinique ont été identifiés à risque selon les scores limites de la SURPS. Conclusion La version française de la SURPS paraît être une mesure valide et sensible pouvant être utilisée auprès d’une population adolescente, québécoise et francophone. PMID:24099502

  16. Lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse

    PubMed Central

    Kahan, Meldon; Wilson, Lynn; Mailis-Gagnon, Angela; Srivastava, Anita

    2011-01-01

    Résumé Objectif Présenter aux médecins de famille un résumé clinique pratique sur la prescription d’opioïdes à des populations particulières en se fondant sur les recommandations faites dans les lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse. Qualité des données Pour produire les lignes directrices, les chercheurs ont effectué une synthèse critique de la littérature médicale en insistant plus précisément sur les études de l’efficacité et de la sécurité des opioïdes dans des populations particulières. Message principal Les médecins de famille peuvent atténuer les risques de surdose, de sédation, d’usage abusif et de dépendance grâce à des stratégies adaptées à l’âge et à l’état de santé des patients. Dans le cas de patients à risque de dépendance, on devrait réserver les opioïdes aux douleurs nociceptives ou neuropathiques bien définies qui n’ont pas répondu aux traitements de première intention. Il faut procéder lentement au titrage des opioïdes, avec des dispensations fréquentes et une étroite surveillance pour dépister tout signe d’usage abusif. Une dépendance aux opioïdes suspectée est prise en charge au moyen d’une thérapie structurée aux opioïdes, d’un traitement à la méthadone ou à la buprénorphine ou encore d’un traitement fondé sur l’abstinence. Les patients souffrant de troubles de l’humeur ou d’anxiété ont tendance à avoir une réponse analgésique atténuée aux opioïdes, sont à risque plus élevé d’usage abusif et prennent souvent des sédatifs qui interagissent défavorablement avec les opioïdes. Il faut prendre des précautions semblables à celles utilisées avec d’autres patients à risque élevé. Il faut faire un sevrage progressif si la douleur du patient demeure sévère même avec un essai adéquat de thérapie aux opioïdes. Chez les personnes âgées, la s

  17. Radionécrose cérébrale chez des patients irradiés pour cancers du nasopharynx: à propos de 3 cas

    PubMed Central

    El Mazghi, Abderrahman; Lalya, Issam; Loukili, Kaoutar; El Kacemi, Hanan; Kebdani, Taieb; Hassouni, Khalid

    2014-01-01

    La radionécrose cérébrale est une complication tardive, iatrogène, relativement rare de la radiothérapie qui survient après plus de six mois suivant le début du traitement. Elle pourrait s'expliquer par la conjonction de lésions vasculaires, gliales et d'ordre immunologiques. Elle peut mettre en jeu le pronostic fonctionnel et vital du malade. La prévention de cette affection redoutable est fondamentale vu l'absence de traitement potentiellement efficace. Nous rapportons 03 nouveaux cas, chez des patients traités par chimiothérapie d'induction puis radio- chimiothérapie concomitante pour des cancers localement avancés du nasopharynx. Le diagnostic a été orienté par l'IRM spectroscopique et l’évolution était favorable sous corticothérapie dans les 03 cas. PMID:25722784

  18. Impact of an indigenous microbial enhanced oil recovery field trial on microbial community structure in a high pour-point oil reservoir.

    PubMed

    Zhang, Fan; She, Yue-Hui; Li, Hua-Min; Zhang, Xiao-Tao; Shu, Fu-Chang; Wang, Zheng-Liang; Yu, Long-Jiang; Hou, Du-Jie

    2012-08-01

    Based on preliminary investigation of microbial populations in a high pour-point oil reservoir, an indigenous microbial enhanced oil recovery (MEOR) field trial was carried out. The purpose of the study is to reveal the impact of the indigenous MEOR process on microbial community structure in the oil reservoir using 16Sr DNA clone library technique. The detailed monitoring results showed significant response of microbial communities during the field trial and large discrepancies of stimulated microorganisms in the laboratory and in the natural oil reservoir. More specifically, after nutrients injection, the original dominant populations of Petrobacter and Alishewanella in the production wells almost disappeared. The expected desirable population of Pseudomonas aeruginosa, determined by enrichment experiments in laboratory, was stimulated successfully in two wells of the five monitored wells. Unexpectedly, another potential population of Pseudomonas pseudoalcaligenes which were not detected in the enrichment culture in laboratory was stimulated in the other three monitored production wells. In this study, monitoring of microbial community displayed a comprehensive alteration of microbial populations during the field trial to remedy the deficiency of culture-dependent monitoring methods. The results would help to develop and apply more MEOR processes. PMID:22159733

  19. Guide de pratique clinique pour les lésions cérébrales traumatiques légères et les symptômes persistants

    PubMed Central

    Marshall, Shawn; Bayley, Mark; McCullagh, Scott; Velikonja, Diana; Berrigan, Lindsay

    2012-01-01

    Résumé Objectif Présenter les nouvelles lignes directrices sur la prise en charge des lésions cérébrales traumatiques légères (LCTL) et les symptômes persistants post-commotion (SPPC) afin de renseigner et d’orienter les médecins qui prennent en charge des patients qui se remettent d’une LCTL. Qualité des données On a effectué une recherche des guides de pratique clinique existants portant sur les LCTL et une synthèse critique des ouvrages scientifiques évaluant le traitement des SPPC. Étant donné la rareté des conseils sur la prise en charge des SPPC dans les travaux sur les lésions cérébrales traumatiques, une deuxième recherche documentaire a été faite pour recenser les guides de pratique clinique et les synthèses critiques concernant la prise en charge de ces symptômes communs dans la population en général. On a convoqué des professionnels de la santé provenant de différentes disciplines et régions du Canada et de l’étranger à une conférence consensuelle d’experts pour examiner les lignes directrices et les données probantes existantes et élaborer un guide complet pour la prise en charge des LCTL et des SPPC. Message principal À l’aide d’un processus Delphi modifié, on a produit 71 recommandations portant sur le diagnostic et la prise en charge des LCTL et des SPPC. De plus, on a inclus dans le guide de nombreuses ressources et des outils pour faciliter la mise en œuvre des recommandations. Conclusion Un guide de pratique clinique a été élaboré pour aider les professionnels de la santé à fournir des soins fondés sur les données probantes et les pratiques exemplaires à la population complexe de personnes qui ont des SPPC à la suite d’une LCTL.

  20. Potentiel des images satellitaires multibandes a haute resolution spatiale pour la cartographie des componsants de l'eau en milieu cotier marin

    NASA Astrophysics Data System (ADS)

    Lavoie, Andre

    L'objectif principal que que nous poursuivons est de developper un modele de simulation du transfert radiatif eau-atmosphere adapte aux observations faites par le capteur Thematic Mapper (TM) de Landsat. Les informations que nous cherchons ont trait au milieu cotier marin et concernent les elements qui sont en suspension dans l'eau. Les images multibandes du capteur TM dans la partie visible du spectre, sont surtout visees par nos travaux. A la base de la simulation, nous utilisons un programme de simulation atmospherique, le code 6S, auquel nous greffons un modele de simulation du transfert radiatif dans la masse d'eau. Ce dernier estime le signal en fonction de 4 composants: l'eau, les pigments chlorophylliens (chlorophylle et phaeopigments), les matieres minerales et les substances organiques dissoutes. La concentration des differents composants sert de parametre d'entree pour definir le comportement optique de la masse d'eau. Le modele permet egalement de simuler une masse d'eau stratifiee si l'on connai t les concentrations des composants dans les differentes couches. Il inclut aussi la contribution du fond, selon sa nature et sa composition, ainsi que celle du miroitement du soleil et du ciel a la surface de l'eau. Les informations d'un echantillonnage de la masse d' eau synchronise avec le passage du satellite, a la baie des Chaleurs, d'une cartographie du couvert d'algues et d'un modele bathymetrique ont ete utilisees pour fixer les parametres de simulation par le modele. La comparaison montrent que le modele se comporte relativement bien surtout dans la bande TM2. Une erreur systematique de 2 valeurs numeriques en moyenne subsiste dans les trois bandes spectrales. Les resultats nous montrent que la visibilite du fond aux faibles profondeurs est un element tres important a considerer. Par ailleurs, l'analyse de sensibilite montre que les images TM sont plus sensibles aux concentrations en matieres minerales qu'aux pigments chlorophylliens et aux substances

  1. Conception d'un capteur intelligent pour la détection des vapeurs de styrène dans l'industrie

    NASA Astrophysics Data System (ADS)

    Agbossou, Kodjo; Agbebavi, T. James; Koffi, Demagna; Elhiri, Mohammed

    1994-10-01

    The techniques of measurement of toxic gases are nowadays based on the semiconductor type sensors. The modelling and the electronic processing of their signals can be used to improve the accuracy and the efficiency of the measurement. In this paper, an intelligent system using a semiconductor sensor has been designed for the detection of the styrene vapors. A set of the environmental parameters sensors such as the temperature, the pressure and the humidity, is added to the basic sensor and allows a precise detection of the styrene vapors in air. A microcontroller and a communication interface, that are included in the control system and in the data processing system, provide the local intelligence. The linearization routines of the differents sensors are in the memory of the microcontroller. The system made of the sensors, of the amplification circuits, of the microcontroller and of the communication network between the smart sensor and the computer is analysed. A laboratory test of the device is presented and the accuracies and efficiencies of the differents sensors are given. Les techniques fiables de quantification des gaz polluants sont aujourd'hui basées sur l'utilisation des détecteurs à récepteurs chimiques et sur des capteurs à semiconducteurs. La modélisation et le traitement numérique des signaux résultants sont importants pour une mesure efficace et précise dans un milieu donné. Dans cet article, un capteur intelligent, utilisant un détecteur de gaz type semiconducteur a été réalisé pour la détection des vapeurs de styrène. Un ensemble de détecteurs des paramètres environnementaux, tels que la température, la pression et l'humidité, ajoutés au capteur de styrène, permettent de mesurer avec un bon contrôle les vapeurs de styrène dans l'air. Le système de contrôle et de gestion local des données est constitué d'un microcontrôleur et d'une interface de communication. Le microcontrôleur contient dans sa mémoire toutes les

  2. Démarche pour la mise à niveau d’un secteur de soins pharmaceutiques : le cas de l’hémato-oncologie pédiatrique

    PubMed Central

    Bussières, Jean-François; Robelet, Antoine; Therrien, Roxane; Touzin, Karine

    2010-01-01

    Contexte : Bien que le concept de pharmacie clinique ait été développé dans les années soixante, il existe une grande variété de programmes et une grande disparité entre les programmes en clinique externe et en hospitalisation, bénéficiant de la présence d’un pharmacien dans un secteur de soins. Objectif: Éprouver une méthode de mise à niveau des secteurs de soins pharmaceutiques en établissement de santé. Méthode : Il s’agit d’une étude descriptive se déroulant au Centre hospitalier universitaire Sainte-Justine, un établissement mère-enfant de 500 lits. Le secteur de soins pharmaceutiques ciblé pour illustrer la méthode de mise à niveau est l’hématologie-oncologie pédiatrique. La méthode comporte trois étapes, soit une revue de la documentation scientifique, un profil du secteur et une mise à jour du niveau de pratique selon un profil des activités pharmaceutiques dans le secteur avant et après la mise à niveau. Résultats : Au total, 108 articles ont été recensés et 22 ont été retenus à partir d’une recherche dans PubMed. Après une recherche manuelle complémentaire, 36 articles ont finalement été évalués. Parmi les articles retenus, on compte trois lignes directrices, 11 études de développement, une revue de la littérature scientifique, six études pré- et post-interventions et 15 études quasi expérimentales. Bien que les patients de ce secteur ne comptent que pour 5 % des admissions de l’hôpital, la complexité des cas est élevée tant sur le plan de la codification de l’épisode de soins que du potentiel d’intervention pharmaceutique par admission. Conclusion : Il existe peu de données illustrant une démarche de mise à niveau de la pratique dans un secteur de soins pharmaceutiques. Cette étude a éprouvé une méthode de mise à niveau dans un service d’hématologie-oncologie pédiatrique et comporte une revue de la documentation scientifique, un profil du secteur et une description des t

  3. Contrôle non destructif par courants de Foucault : expérience et modélisation pour la conception et l'optimisation de capteurs

    NASA Astrophysics Data System (ADS)

    Bonnin, O.; Cahouet, J.; Giordano, P.

    1993-03-01

    more accurate comparison, for example on the crack depth, is difficult because of the uncertainty on the physical properties of the materials. Dans le cadre d'un projet industiel de conception et d'optimisation de capteurs pour la recherche de fissures par courants de Foucault sur les plate-formes de forage, on présente les études menées pour la modélisation du système. La simulation des phénomènes implique à priori une modélisation tridimensionnelle, certes précise, mais difficile et coûteuse. On cherche à en limiter le coût en combinant une modélisation bidimensionnelle en l'absence de défaut, et une modélisation tridimensionnelle locale en présence d'une fissure. Après avoir présenté le projet et l'étude expérimentale qui en découle, on décrit les techniques de modélisation qui ont été employées.

  4. Lambeau musculocutané infra hyoidien à palette cutané horizontale pour un angiomyxome agressif de la face interne de la joue

    PubMed Central

    Kettani, Mounir; Touihem, Nabil; Attifi, Hicham; Hmidi, Mounir; Boukhari, Ali; Zalagh, Mohamed; Messary, Abdelhamid

    2014-01-01

    Décrit par Wang en 1986, le lambeau musculocutané infra hyoidien est vascularisé par l'artère thyroïdienne supérieure et comporte les muscles sternohyoïdien, sternothyroïdien et le chef supérieur du muscle Omo hyoïdien. Le prélèvement horizontal de la palette cutanée ne modifie pas la fiabilité du lambeau et permet d’éviter des cicatrices supplémentaires. L'angiomyxome agressif est une tumeur mésenchymateuse développée aux dépens du tissu conjonctif avec un site de prédilection pour les parties molles du périné féminin. Cette tumeur croit progressivement mais n'est pas métastatique. Le traitement indiqué actuellement est l'exérèse chirurgicale large. La tumeur a une tendance à la récidive locale, qui est fréquente, liée à la difficulté d'une exérèse initiale complète. Nous rapportons le cas d'un angiomyxome agressif de la joue chez un patient de 63 ans, qui a été traité par chirurgie avec reconstruction par un lambeau musculocutané infra hyoidien à palette cutanée horizontale. Les aspects cliniques, histologiques et thérapeutiques de la tumeur ont été discutés. PMID:25469203

  5. Trois types de stratégies des fabricants pour la fidélisation aux médicaments de marque

    PubMed Central

    Prémont, Marie-Claude; Gagnon, Marc-André

    2014-01-01

    La restructuration de l'industrie pharmaceutique a mené au développement de trois nouveaux types de stratégies commerciales pour la fidélisation de différentes cohortes de patients à des médicaments: la fidélisation par le rabais, par l'accompagnement et par la compassion. La fidélisation par le rabais vise à maintenir les traitements au produit de marque et décourager la substitution au produit générique. La fidélisation par l'accompagnement est basée sur une offre des services de suivi et d'accompagnement à domicile et par téléphone afin d'encourager les patients à adopter un traitement puis d'en améliorer l'observance. Enfin, l'industrie offre des programmes de compassion où les patients peuvent recevoir des traitements avant même que le médicament ne soit généralement disponible ou remboursé par son assureur. Dès que le médicament (le plus souvent très dispendieux) est inscrit à la liste des médicaments remboursés, le manufacturier met fin au programme de compassion et bénéficie d'une importante cohorte de patients déjà sous traitement. L'impact de ces programmes sur les politiques publiques et les droits des patients soulève de nombreuses préoccupations, au nombre desquelles figurent au premier plan l'accès direct du fabricant au patient et ses données de santé et la pression à la hausse sur les coûts de l'assurance-médicaments. PMID:25617517

  6. Électrolytes-gels pour piles au lithium système PVdF-HFP/SiO2/VL-LiTFSI

    NASA Astrophysics Data System (ADS)

    Caillon-Caravanier, M.; Claude-Montigny, B.; Lemordant, D.; Bosser, G.

    2002-04-01

    Les électrolytes-gels étudiés sont constitués du copolymère poly (fluorure de vinylidène-hexafluoropropylène) (PVdF-HFP) contenant où non de la silice et ayant absorbé un électrolyte liquide obtenu par dissolution du (trifluorométhyl sulfone) imidure de lithium (LiTFSI) dans la gamma-valérolactone (VL) ou dans le mélange VL:EC (90:10 en moles) (EC:carbonate d'éthylène). L'influence du pourcentage en sel de lithium dans l'électrolyte liquide, de la proportion de silice dans le copolymère sec et de la température sur la capacité d'absorption est étudiée. L'évolution de la conductivité en fonction de la composition de l'électrolyte-gel et de la température ainsi que l'étude de la solvatation de l'ion Li^+ par spectroscopie RAMAN ont permis de proposer un modèle de conductivité ionique pour ces matériaux. Après avoir déterminé le domaine d'électroactivité des gels, l'évolution des spectres d'impédance à l'interface Li / gel est interprétée par le modèle “couche polymère solide" (SPL).

  7. The effects of a pour-on formulation of fluazuron 2.5 % and flumethrin 1 % on populations of Rhipicephalus decoloratus and Rhipicephalus microplus both on and off bovine (Bonsmara breed) hosts.

    PubMed

    Fourie, Josephus J; Liebenberg, Julian E; Nyangiwe, Nnkululeko; Austin, Clinton; Horak, Ivan G; Bhushan, Chandra

    2013-08-01

    The present study demonstrated the efficacy of a pour-on formulation of fluazuron 2.5 % and flumethrin 1 % (Drastic Deadline eXtreme®) against Rhipicephalus decoloratus and Rhipicephalus microplus on cattle on pasture previously grazed by experimentally infested animals. Six tick-free cattle were placed on the pasture and treated 7 days later (Day 0) with the pour-on. They were retreated on Days 63, 126 and 189 and monthly tick counts were done. Mean numbers of adult R. decoloratus and/or R. microplus decreased from 53 and 14 on Days 56 and 112 respectively to 2 or less on all other occasions including Day 254. Compared to the numbers of R. decoloratus and/or R. microplus larvae collected from vegetation in the previous year, larval numbers declined by 40.7 % on Day 28, and thereafter reduction remained between 84 % and 100 %. Pairs of tracer calves placed on the pasture for 7 days each month were then held in pens and adult ticks that detached collected. Reduction in the numbers of R. decoloratus collected from tracer animals was 75 % on Day 56 and remained above 93 % except for Day 224 when it temporarily decreased to 78.5 %. Reduction in the numbers of R. microplus was 97.5 % on Day 28 and remained above 98 % until the conclusion of the study on Day 254. Treatment with the pour-on formulation of fluazuron and flumethrin resulted in a marked decrease in the numbers of R. decoloratus and/or R. microplus on treated cattle followed by a reduction in the numbers of larvae questing on the vegetation and ticks picked up by tracer calves. No other potential host species for R. decoloratus and/or R. microplus were present in the camps. PMID:23749085

  8. Cholécystectomie laparoscopique pour cholécystite aiguë lithiasique: à propos de 22 cas colligés à l'hôpital de la renaissance de Ndjamena

    PubMed Central

    Kaimba, Bray Madoué; Mahamat, Youssouf; Akouya, Seid Dounia

    2015-01-01

    Déterminer la faisabilité de la cholécystectomie laparoscopique pour cholécystite aiguë lithiasique dans notre contexte d'exercice, et d'en évaluer les résultats. Nous rapportons une série de 22 patients ayant bénéficié d'une cholécystectomie laparoscopique pour cholécystite aiguë lithiasique sur une période de 16 mois (Décembre 2013- Mars 2015). Sur 22 patients été opérés, il y avait une nette prédominance féminine (20 femmes soit 91%). La durée moyenne de l'intervention était de 90 mn avec des extrêmes de 38 et 142 mn. L’âge moyen de nos patients était de 42 ans avec des extrêmes de 16 à 65 ans. La durée d'hospitalisation a été de 2 à 6 jours avec une moyenne de 3 jours. Le taux de conversion en laparotomie était de 4.5%. Les suites opératoires immédiates ont été simples dans 90.9% des cas. Les complications concernaient 2 patients (9.1%) dont 1 suppuration pariétale et 1 hémorragie de paroi. La cholécystectomie laparoscopique pour cholécystite aigue lithiasique est faisable dans notre contexte au delà des 72 heures d’évolution sans majoration de risques. PMID:26587159

  9. La prise en charge à long terme de l’asthme chez les enfants inuits et des Premières nations : un outil de transfert du savoir fondé sur les lignes directrices canadiennes pour l’asthme pédiatrique, conçu pour être utilisé par les professionnels de la santé de première ligne qui travaillent dans des communautés isolées

    PubMed Central

    Kovesi, Tom; Giles, Brenda Louise; Pasterkamp, Hans

    L’asthme est un grave problème de santé pour les enfants inuits et des Premières nations. Chez les enfants de moins d’un an, il faut distinguer l’asthme de la bronchiolite virale, anormalement fréquente chez les enfants autochtones du Canada. Chez les enfants de moins de six ans, le diagnostic dépend de la présence de symptômes classiques, de l’absence de caractéristiques atypiques et de la consignation de la réponse au traitement, notamment la réponse rapide et transitoire aux bronchodilatateurs. Chez les enfants plus âgés, il faut, dans la mesure du possible, déterminer la présence d’une obstruction réversible des voies aériennes par spirométrie afin de confirmer le diagnostic, ainsi qu’évaluer et corriger les déclencheurs environnementaux. L’utilisation régulière de corticoïdes en aérosol est la principale mesure à prendre pour maintenir un bon contrôle de l’asthme chez les enfants asthmatiques. Les clients et leur famille devraient recevoir une formation sur l’asthme. Il faut réévaluer régulièrement le contrôle aux visites de suivi dans des centres de santé et rajuster le traitement à la dose la plus basse possible pour le maintien de ce contrôle.

  10. Translation into French of: “Changes to publication requirements made at the XVIII International Botanical Congress in Melbourne – what does e-publication mean for you?”. Translated by Christian Feuillet and Valéry Malécot Changements des conditions requises pour la publication faits au XVIII e Congrès International de Botanique à Melbourne – qu’est-ce que la publication électronique représente pour vous?

    PubMed Central

    Knapp, Sandra; McNeill, John; Turland, Nicholas J.

    2011-01-01

    Résumé Les changements au Code International de Nomenclature Botanique sont décidés tous les 6 ans aux Sections de Nomenclature associées aux Congrès Internationaux de Botanique (CIB). Le XVIIIe CIB se tenait à Melbourne, Australie; la Section de Nomenclature s’est réunie les 18-22 juillet 2011 et ses décisions ont été acceptées par le Congrès en session plénière le 30 juillet. Suite à cette réunion, plusieurs modifications importantes ont été apportées au Code et vont affecter la publication de nouveaux noms. Deux de ces changements prendront effet le 1er janvier 2012, quelques mois avant que le Code de Melbourne soit publié. Les documents électroniques publiés en ligne en ‘Portable Document Format’ (PDF) avec un ‘International Standard Serial Number’ (ISSN) ou un ‘International Standard Book Number’ (ISBN) constitueront une publication effective, et l’exigence d’une description ou d’une diagnose en latin pour les noms des nouveaux taxa sera changée en l’exigence d’une description ou d’une diagnose en latin ou en anglais. De plus, à partir du 1er janvier 2013, les noms nouveaux des organismes traités comme champignons devront, pour que la publication soit valide, inclure dans le protologue (tous ce qui est associé au nom au moment de la publication valide) la citation d’un identifiant (‘identifier’) fourni par un dépôt reconnu (tel MycoBank). Une ébauche des nouveaux articles concernant la publication électronique est fournie et des conseils de bon usage sont esquissés. Pour encourager la diffusion des changements adoptés au Code International de Nomenclature pour les algues, les champignons et les plantes, cet article sera publié dans BMC Evolutionary Biology, Botanical Journal of the Linnean Society, Brittonia, Cladistics, MycoKeys, Mycotaxon, New Phytologist, North American Fungi, Novon, Opuscula Philolichenum, PhytoKeys, Phytoneuron, Phytotaxa, Plant Diversity and Resources, Systematic Botany et

  11. Translation into French of: "Changes to publication requirements made at the XVIII International Botanical Congress in Melbourne - what does e-publication mean for you?". Translated by Christian Feuillet and Valéry Malécot Changements des conditions requises pour la publication faits au XVIII Congrès International de Botanique à Melbourne - qu'est-ce que la publication électronique représente pour vous?

    PubMed

    Knapp, Sandra; McNeill, John; Turland, Nicholas J

    2011-01-01

    RésuméLes changements au CodeInternational de Nomenclature Botanique sont décidés tous les 6 ans aux Sections de Nomenclature associées aux Congrès Internationaux de Botanique (CIB). Le XVIII(e) CIB se tenait à Melbourne, Australie; la Section de Nomenclature s'est réunie les 18-22 juillet 2011 et ses décisions ont été acceptées par le Congrès en session plénière le 30 juillet. Suite à cette réunion, plusieurs modifications importantes ont été apportées au Code et vont affecter la publication de nouveaux noms. Deux de ces changements prendront effet le 1(er) janvier 2012, quelques mois avant que le Code de Melbourne soit publié. Les documents électroniques publiés en ligne en 'Portable Document Format' (PDF) avec un 'International Standard Serial Number' (ISSN) ou un 'International Standard Book Number' (ISBN) constitueront une publication effective, et l'exigence d'une description ou d'une diagnose en latin pour les noms des nouveaux taxa sera changée en l'exigence d'une description ou d'une diagnose en latin ou en anglais. De plus, à partir du 1(er) janvier 2013, les noms nouveaux des organismes traités comme champignons devront, pour que la publication soit valide, inclure dans le protologue (tous ce qui est associé au nom au moment de la publication valide) la citation d'un identifiant ('identifier') fourni par un dépôt reconnu (tel MycoBank). Une ébauche des nouveaux articles concernant la publication électronique est fournie et des conseils de bon usage sont esquissés.Pour encourager la diffusion des changements adoptés au Code International de Nomenclature pour les algues, les champignons et les plantes, cet article sera publié dans BMC Evolutionary Biology, Botanical Journal of the Linnean Society, Brittonia, Cladistics, MycoKeys, Mycotaxon, New Phytologist, North American Fungi, Novon, Opuscula Philolichenum, PhytoKeys, Phytoneuron, Phytotaxa, Plant Diversity and Resources, Systematic Botany et Taxon. PMID:22287925

  12. Efficacy of deltamethrin (Butox® 7.5 pour on) against nymphs and adults of ticks (Ixodes ricinus, Rhipicephalus sanguineus) in treated hair of cattle and sheep.

    PubMed

    Mehlhorn, Heinz; Schumacher, Bärbel; Jatzlau, Antje; Abdel-Ghaffar, Fathy; Al-Rasheid, Khaled A S; Klimpel, Sven; Pohle, Herbert

    2011-04-01

    Ticks are known to be able to transmit a broad spectrum of agents of diseases in cattle or sheep. Therefore, measurements are needed to keep ticks away from the body of any ruminant belonging to the agricultural life stock. The present study dealt with investigations to measure the efficacy of the insecticide deltamethrin (Butox® 7.5 pour on) against specimens of two important species (Ixodes ricinus and Rhipicephalus sanguineus). Four sheep and four young cattle were treated lege arte along the vertebral column with 10 ml Butox® (deltamethrin) per sheep or 30 ml Butox® per cattle. Day 7, 14, 21, and 28 after the treatment, hair was shaved off from the head, ears, the back, belly, and the feet being collected in separate, suitable plastic bags, and transported to the institute, where these hair were brought into close contact with either adult and/or nymph stages of I. ricinus and R. sanguineus. As results, strong, acaricidal effects were seen, which varied according to the parasite species, the origin of the hair (e.g., head, leg, etc.) and according to the period after the treatment. In sheep, the acaricidal effect was noted for the whole period of 28 days along the whole body with respect to adults and nymphs of I. ricinus, while the acaricidal effects of deltamethrin were reduced for R. sanguineus stages beginning at day 21 after treatment. In cattle, the full acaricidal effect was seen for 21 days in I. ricinus stages and for 14 days in R. sanguineus, while the acaricidal efficacy became reduced after these periods of full action-beginning at the hair taken from the legs. Only R. sanguineus adults did not show any reaction on day 28 after treatment. Besides these acaricidal effects, repellent effects were also noted. Full repellency for both species was seen during the first 14 days in sheep and cattle against Ixodes and Rhipicephalus, while the repellency was later reduced, especially in contact with hair from the legs. As conclusion, deltamethrin, besides

  13. Étude des anomalies chromosomiques après radiothérapie chez des patients traités pour lymphome malin non-Hodgkinien

    NASA Astrophysics Data System (ADS)

    Mahe, M. A.; André, M. J.; Moyon, E.; Le Mevel, A.; Soubeyran, P.; Hamidou, M.; Milpied, N.; Bourdin, S.; Cuillière, J. C.; Chatal, J. F.

    1998-04-01

    Structural chromosome defects were evaluated in the lymphocytes of 30 patients (pts) who had undergone radiotherapy for non Hodgkin's lymphoma (NHL). Twelve had received 20 Grays (Gy) over the abdomen (group I), 12 whole body irradiation at 1.5 Gy (group II) and 6 whole body irradiation at 15 Gy (group III). A cohort of 468 unirradiated pts served as controls. For the irradiated group, 7% of cells had aberrations compared to 0.4% in controls {P <10-6}. The frequency of abnormal cells was statistically higher in group I (12%) than in group II (3.5%) and III (2.5%) . In group I, frequency of aberrations was statistically higher in pts who had additionnal extra-abdominal involved field irradiation, those with evolutive NHL and those receiving chemotherapy at the time of the cytogenetic analysis. Les aberrations chromosomiques ont ,été, mesurées sur les lymphocytes de 30 patients (pts) irradiés pour lymphome malin non-hodgkinien (LNH) selon 3 modalités : 20 Grays (Gy) sur l'abdomen (groupe I : 12 pts), Irradiation corporelle totale 1,5 Gy (groupe II : 12 pts), ou 15 Gy (groupe III : 6 pts). Une population non irradiée de 468 pts a servi de témoin. Dans le groupe irradié, 7 % des cellules présentaient des anomalies contre 0,4 % dans le groupe témoin {P <10-6}. Les aberrations ,étaient statistiquement plus nombreuses dans le groupe I (12 % des cellules) que dans les groupes II (3,5 %) et III (2,5 %). Dans le groupe I, les anomalies , étaient statistiquement plus fréquentes chez les pts ayant eu une irradiation localisée extra-abdominale en complément de celle de l'abdomen ainsi que chez ceux en rechute de leur LNH et ceux recevant une chimiothérapie lors de l',étude cytogénétique.

  14. Tick infestations in extensively grazed cattle and efficacy trial of high-cis cypermethrin pour-on preparation for control of ticks in Mvomero district in Tanzania

    PubMed Central

    2012-01-01

    Background This study aimed at determining the extent of tick infestations in extensively grazed cattle and assess the efficacy of Ecotix® acaricide (2.5% high cis cypermethrin) in Mvomero district in Tanzania. A total of 1200 Tanzanian short horn Zebu (TSHZ) from two farms in two villages were qualitatively assessed for tick infestations and 40 animals (grouped in 10s from each farm) were separated in their herds and quantitatively examined to establish the tick load. The animals were grouped in treatment regime groups (TxRG 1, 2, 3, and 4), TxRG 1 being the control group was treated with water. Ecotix® was applied on day 0 for TxRG 2, days 0 and 7 for TxRG 3 and days 0, 7 and 14 for TxRG 4 and tick load was monitored for 28 days. Results All the animals examined were infested with ticks. The identified ticks were Rhipicephalus appendiculatus (55%), Amblyomma variegatum (18%), R. (Boophilus) microplus (12.9%), R. (B) decoloratus (7.1%), R. evertsi evertsi (4.4%) and R. composites (2.6%). The overall mean (mean ± SEM) tick density on day zero was 63 ± 30 ticks per animal (ranging from 20–160). The mean tick density on day zero was 44.6 ± 25.4, 74.6 ± 30.3, 55.0 ± 26.2 and 77 ± 33.5 for groups one, two, three and four respectively. Post-treatment quantitative assessment of tick burden revealed that the TxRG 1 animals maintained a tick load throughout the study period. A significant decrease in tick load in animals in groups TxRG 2, 3 and 4 (P=0.0001) with increasing frequency of Ecotix® application was recorded. There was however no significant difference in tick reduction between TxRG 3 and 4 (P=0.0986). Thus TxRG 3 would be sufficient for the monthly tick treatment and with this regime, the farmer would save up to 2.5 USD per animal during six months of dry season. Conclusions The study revealed a high tick infestation among the TSHZ kept in extensive grazing systems in Mvomero district and that when treated with Ecotix® as pour-on preparation using a

  15. Anoplastie périnéale simple pour le traitement des malformations anorectales basses chez l'adulte, à propos de deux cas

    PubMed Central

    Echchaoui, Abdelmoughit; Benyachou, Malika; Hafidi, Jawad; Fathi, Nahed; Mohammadine, Elhamid; ELmazouz, Samir; Gharib, Nour-eddine; Abbassi, Abdellah

    2014-01-01

    Les malformations anorectales chez l'adulte sont des anomalies congénitales rares du tube digestif qui prédominent chez le sexe féminin. Notre étude porte sur deux observations de malformation anorectale basses vues et traitées au stade adulte par les 2 équipes (plasticiens et viscéralistes) à l'Hôpital Avicenne à Rabat. Il s'agit d'un homme de 24 ans avec une dyschésie anale l'autre cas est une femme de 18 ans avec une malformation anovulvaire Les caractéristiques cliniques combinées avec les imageries radiologiques (lavement baryté, et la manométrie anorectale) ont confirmé qu'il s'agit d'une malfomation anorectale basse. Les deux cas sont corrigés par une reconstruction sphinctérienne, réimplantation anale avec anoplastie périnéale. Les suites opératoires étaient simples, pas de souffrance cutanée ou nécrose, avec changement de pansement gras chaque jour. Le résultat fonctionnel (la continence) était favorable pour les 2 patients. La présentation des MAR à l’âge adulte est rare, d’étiologie mal connu, elles apparaissent selon le mode sporadique. Les caractéristiques cliniques, couplées à l'imagerie (lavement baryté, IRM pelvienne), l'endoscopie et la manométrie anorectale, permettent de confirmer le diagnostic et classer ces anomalies en 3 types: basses, intermédiaires, et hautes. Les formes basses sont traités d'emblée par une réimplantation anale et anoplastie périnéale simple tels nos deux cas, elles peuvent être traités dans certains cas par un abaissement anorectale associé à une plastie V-Y permettant ainsi un emplacement anatomique correct de l'anus; alors que les formes hautes ou intermédiaires relèvent d'une chirurgie complexe avec souvent une dérivation digestive transitoire. Contrairement aux autres formes, Les formes basses ont un pronostic fonctionnel favorable. PMID:25667689

  16. Pouring it on in Ohio

    SciTech Connect

    Malloy, M.G.

    1996-03-01

    For IMCO Recycling, Inc. (Irving, Texas), scrap is anything but a dirty word. Sheet scrap, used beverage cans (UBCs), and other types of aluminum recovered from the waste stream are the major feedstock for the company`s 335-million-pound per-year (ppy) aluminum recycling facility in Uhrichsville, Ohio, about halfway between Akron, Ohio, and Wheeling, West Virginia. The facility is the largest for IMCO, which, in turn, claims to be the world`s largest aluminum recycling company. The company upgraded the facility to its current capacity in 1994, just two years after the plant went on line. IMCO had foreseen the need for expansion when it built the facility, leaving space for two more furnaces than the eight that it had originally. IMCO, whose name was derived from the company`s predecessor, International metals Co., was organized in its current form in 1988. It now has an annual total capacity of about 1.7 billion ppy, according to Paul Dufour, the company`s CEO.

  17. Modification et caractérisation de la surface de fibres de verre pour son insertion postérieure dans des matériaux cimentaires

    NASA Astrophysics Data System (ADS)

    Bismarck, A.; Ajuriagojeaskoa, E. E.; Springer, J.; Habel, W. R.

    1999-07-01

    Optical fibres are widely used as physical and mechanical sensors in various matrices. Those commercial available fibres are mostly coated with different polymers (e.g. polyimide). The problem of using such coatings is the undefined adhesion and the stress transmission from the matrix material into the fibre as well as the alkaline attack from the cementitious environments onto the glass surface. Therefore the known silanisation process with alkylsilanes for surface modification was studied. To achieve a silane film onto the fibre surface as close as possible a fibre pre-treatment in oxygen plasma was applied. The wetting behaviour of the oxygen plasma treated fibres as well as the silanized fibres were studied using the Wilhelmy-method. The influence of the silane concentration and the time of the pre-treatment on the wetting properties was investigated. By scanning electron microscopy, changes of the surface morphology were detected. Additionally, the mechanical properties of the oxygen plasma treated fibres, and silanized fibres exposed to a highly alkaline pore solution were measured. For selected fibre samples (decoated and untreated as well as silanized fibres) the adhesion to a concrete matrix was studied using the indention test. Les fibres optiques sont de plus en plus utilisées comme capteurs des propriétés physiques et mécaniques de nombreuses matrices. Ces fibres commerciales sont généralement enrobées avec différents polymères (par exemple polyimide). Les problèmes dus à l'enrobage des fibres optiques sont une adhésion et une transmission de charge de la matrice du béton à la fibre non définies. Un autre problème majeur est l'alcalinité du béton et son influence sur la surface de la fibre. Nous avons utilisé le procédé de silanisation. Pour obtenir un film de silane le plus homogène possible sur la surface, les fibres sont pré-traitées par le plasma d?oxygène. Le mouillage de fibres traitées par le plasma d?oxygène, ainsi que

  18. Modèle mathématique pour l'étude des équilibres physico-chimiques de permanentes.

    PubMed

    Chiodi, F

    1989-12-01

    Résumé La plupart des permanentes du commerce sont constituées d'acide thioglycolique (éventuellement associéà l'acide thiolactique), neutralisé par l'ammoniac, elles sont additionnées de carbonate d'ammonium comme tampon. Le système peut etre traité comme la neutralisation d'un mélange d'acides thioglycolique et carbonique par l'ammoniac, et il est complètement défini par trois paramètres, trois concentrations, ou deux concentrations et le pH, ou trois paramètres analytiques indépendants. Les calculs théoriques de l'équilibre sont compliqués du fait qu'il s'agit de l'équilibre de deux diacides faibles neutralisés par une base faible. Un modèle mathématique développé exclusivement par des équations théoriques permet l'interprétation des équilibres et la réalisation des calculs fiable pour la préparation des formules remplissant certaines caractéristiques. Le modèle permet de réaliser facilement des simulations en faisant varier les concentrations, les acides (par la voie des constantes de dissociation) ou d'associer différents acids et/ou bases organiques ou minérales. Une application complémentaire du modèle est de tracer la courbe dérivée à la courbe de neutralisation et de cette façon mesurer l'effet tampon en différents points par la mesure de sa pente. Synopsis Mathematical model for the study of physico-chemical equilibria in permanent wave solutions Most waving lotions on the market are prepared with thioglycolic acid (eventually associated with thiolactic acid) neutralized with ammonium hydroxide and buffered with ammonium bicarbonate. The system can be treated as the neutralization of a mix of carbonic acid and thioglycolic acid by ammonia and it is completely defined by three parameters: three concentrations; or two concentrations and pH; or three independent analytical parameters. Theoretical calculations of the equilibrium are difficult because the equilibrium involves at least two weak acids with a weak base

  19. Des recommandations probantes pour surveiller l’innocuité des antipsychotiques de deuxième génération chez les enfants et les adolescents

    PubMed Central

    Pringsheim, Tamara; Panagiotopoulos, Constadina; Davidson, Jana; Ho, Josephine

    2012-01-01

    HISTORIQUE : Au Canada, l’utilisation d’antipsychotiques, notamment les antipsychotiques de deuxième génération (ADG), a augmenté de façon considérable depuis cinq ans chez les enfants ayant des troubles de santé mentale. Ces médicaments ont le potentiel de causer de graves complications métaboliques et neurologiques lorsqu’on les utilise de manière chronique. OBJECTIF : Synthétiser les données probantes relatives aux effets secondaires métaboliques et neurologiques précis associés à l’usage d’ADG chez les enfants et fournir des recommandations probantes sur la surveillance de ces effets secondaires. MÉTHODOLOGIE : Les auteurs ont procédé à une analyse systématique des essais cliniques contrôlés des ADG auprès d’enfants. Ils ont fait des recommandations à l’égard de la surveillance de l’innocuité des ADG d’après un modèle de classification fondé sur le système GRADE (système de notation de l’évaluation et de l’élaboration des recommandations). Lorsque les données probantes n’étaient pas suffisantes, ils fondaient leurs recommandations sur le consensus et l’avis d’experts. Un groupe consensuel multidisciplinaire a analysé toutes les données probantes pertinentes et est parvenu à un consensus à l’égard des recommandations. RÉSULTATS : Les recommandations probantes portant sur la surveillance de l’innocuité des ADG figurent dans les présentes lignes directrices. Les auteurs indiquent la qualité des recommandations relatives à des examens physiques et tests de laboratoire précis à l’égard de chaque ADG à des moments déterminés. CONCLUSION : De multiples essais aléatoires et contrôlés ont permis d’évaluer l’efficacité de bon nombre des ADG utilisés pour traiter les troubles de santé mentale en pédiatrie. Toutefois, leurs avantages ne sont pas sans risques : on observe à la fois des effets secondaires métaboliques et neurologiques chez les enfants traités au moyen d

  20. Comparative efficacy of ivermectin pour-on, albendazole, oxfendazole and fenbendazole against Ostertagia ostertagi inhibited larvae, other gastrointestinal nematodes and lungworm of cattle.

    PubMed

    Williams, J C; DeRosa, A; Nakamura, Y; Loyacano, A F

    1997-12-15

    An experiment was conducted to evaluate the current efficacy of albendazole (ABZ), oxfendazole (OXF) and fenbendazole (FBZ) compared with ivermectin pour-on (IVM-PO) against inhibited early fourth-stage larvae (IEL4) of Ostertagia ostertagi, other gastrointestinal nematodes and lungworm of cattle during spring in Louisiana. Twenty-five crossbred beef heifer calves of 235 kg average weight and 10-12 months of age were acquired in late winter and grazed for 9 weeks on pasture contaminated with O. ostertagi and other nematodes until May 15. The cattle were weighed and randomly allotted into 5 groups of 5 calves on May 16 (day 0) and treatments were as follows: group 1, nontreated controls (CONT); group 2, IVM-PO on mid-backline at 500 micrograms/kg; group 3, ABZ suspension (oral) at 10 mg/kg; group 4, OXF suspension (oral) at 4.5 mg/kg; group 5, FBZ suspension (oral) at 5 mg/kg. After treatment and confinement in separate pens for each group, approximately equal numbers of cattle from each group were necropsied daily between days 29-31. Mean numbers of O. ostertagi developmental stages present in CONT were: adult, 5234; developing (DL4), 3130; IEL4, 44,077. The mean percentage of IEL4 was 84.1. Cooperia spp. were the second most prevalent in CONT (20,307) and smaller numbers of abomasal and intestinal species and Dictyocaulus viviparus were present in nearly all CONT. Percent reductions for the four compounds against O. ostertagi adult, DL4 and IEL4, respectively, were IVM-PO: 99.7, 98.3, 98.1; ABZ: 74.1, 76.5, 75.3; OXF: 78.5, 42.1, 32.0; FBZ: 63.6, 17.7, 39.7. Efficacy of IVM-PO was greater (P < 0.05) against all O. ostertagi stages than the benzimidazole (BZ) drugs, except for ABZ (DL4). There were no significant differences in group means (except for C. punctata adult males, P < 0.05 lower for IVM-PO) or wide variation in reduction percentages for other abomasal and intestinal species and D. viviparus between IVM-PO and BZ drugs. The low efficacy of all three BZ

  1. Les campagnes de dépistage du VIH, une stratégie efficace pour l’accès universel à la prévention et au traitement ? L’expérience du Burkina Faso

    PubMed Central

    Somé, J.F.; Desclaux, A.; Ky-Zerbo, O.; Lougué, M.; Kéré, S.; Obermeyer, C.; Simaga, F.

    2014-01-01

    Objectifs l’augmentation du taux de personnes qui connaissent leur statut VIH est un impératif, notamment en Afrique subsaharienne, ce qui impose d’évaluer les stratégies utilisées pour accroître la fréquentation des services de dépistage. Cet article vise à faire le bilan de la pertinence, de la faisabilité et de l’efficacité des campagnes nationales de dépistagemenées entre 2006 et 2010 au Burkina Faso. Méthodologie une analyse de toutes les données de fréquentation du conseil dépistage sur cette période a été faite, couplée à des entretiens avec les principaux acteurs intervenant dans le dépistage. Résultats les résultats montrent que les huit campagnes de dépistage organisées sur la période ont permis à 487 727 personnes de faire leur test VIH. Ce nombre représente 50 % du nombre total de personnes ayant fait leur test et contribue à hauteur de 24,6 % au dépistage des personnes séropositives identifiées au cours de cette période. Les campagnes ont touché des populations difficiles à atteindre (en particulier les jeunes), à un coût moindre. Conclusions cette stratégie est donc pertinente pour identifier les personnes VIH+. Son intérêt pour la prévention, important selon les soignants et au vu des populations jeunes qui y participent, devrait être mesuré par des études complémentaires. Les campagnes sont efficaces et coût-efficaces même dans un pays de niveau de prévalence faible. Ces résultats soulignent l’intérêt de la synergie entre les associations et les services de santé dans l’offre de services de conseil et dépistage. PMID:24681563

  2. Les médicaments à libération prolongée pour les enfants et les adolescents ayant un trouble de déficit de l’attention avec hyperactivité

    PubMed Central

    Feldman, M; Bélanger, S

    2009-01-01

    Le trouble de déficit de l’attention avec hyperactivité (TDAH) touche un enfant canadien sur 20 et s’associe à un dossier scolaire et à un registre d’emploi défavorables, à des taux élevés de blessures et de consommation de drogues ou d’alcool, à des relations interpersonnelles médiocres, à de mauvaises issues en santé mentale et à une qualité de vie insatisfaisante. Des essais contrôlés démontrent que les médica-ments sont efficaces pour traiter les symptômes de TDAH tandis que des études d’observation indiquent qu’ils s’associent à de meilleures issues sociales et de santé. De nombreuses familles, ainsi que leur médecin traitant, préfèrent les médicaments à libération prolongée (LP) contre le TDAH aux médicaments à libération immédiate (LI) et à action brève. Toutefois, les préparations à LP sont souvent inabor-dables pour les familles, dont un nombre disproportionné fait partie de la strate à faible statut socioéconomique. Le présent document de principes vise à proposer une évaluation critique des données probantes sur l’efficacité relative des médicaments à LP par rapport aux médicaments à LI ainsi que des recommandations au sujet de leur utilisation convenable dans le traitement du TDAH. Lorsque les médicaments sont indiqués, il faut envisager d’utiliser des préparations à LP comme traitement de première intention contre le TDAH parce qu’elles sont plus efficaces et moins susceptibles d’être détournées. Les futures recherches et les analyses coûts-avantages doivent tenir compte à la fois de l’efficacité de médicaments dans des études contrôlées et de leur efficacité clinique en situation réelle ainsi que du potentiel de détournement et de mésusage de ces médicaments. L’industrie, les sociétés d’assurance et le gouvernement doivent collaborer pour rendre ces médicaments accessibles à tous les enfants et adolescents ayant un TDAH.

  3. Étude Préliminaire de Fiabilité de l’Échelle de Labilité Émotionnelle Adaptée pour Adolescents dans une Population Interne Francophone

    PubMed Central

    Guilé, Jean Marc; Chapdelaine, Cimon; Desrosiers, Lyne; Cornez, Christine; Bouvier, Hélène; Breton, Jean-Jacques

    2009-01-01

    Résumé Objectif: étudier la fiabilité en population clinique francophone d’un auto-questionnaire portant sur l’instabilité émotionnelle des adolescents. Méthode: Après recension des écrits et consultation d’experts, l’Échelle de Labilité Émotionnelle (Affective Lability Scale) développée par Harvey et collaborateurs (1989) a été choisie. Une version anglophone et francophone adaptée à la population adolescente a été élaborée. La version finale comprend 54 questions réparties en six sections examinant les variations émotionnelles entre euthymie d’une part, et dépression, élation, colère et anxiété d’autre part, ainsi qu’entre anxiété et dépression, et enfin entre dépression et élation. La version francophone a fait l’objet d’une étude de fiabilité. Au total 43 adolescents francophones (48,8% garçons, 51,2% filles d’âge moyen=14,86 ans) ont participé à l’étude de compréhension et de fiabilité. Résultats: Toutes les questions ont un taux de compréhension par item (TCI)>0,60 tel qu’évalué par accord interjuge (Kappa-moyen=0,85). Le TCI-moyen est très satisfaisant (0,88, SD=0,14). La consistance interne appréciée par les coefficients de Cronbach est élevée pour chaque section et pour l’ensemble de l’instrument (0,87 à 0,95). La stabilité temporelle à trois semaines est satisfaisante avec un coefficient de corrélation-intraclasse (CIC) pour l’ensemble de l’échelle de 0,89 (intervalle de confiance à 95%=0,75 et 0,95) et des CIC de section s’échelonnant entre 0,72 et 0,89. Conclusion: Ces premières données de fiabilité soutiennent l’intérêt de l’ALS pour évaluer, en période euthymique chez des adolescents francophones en unité interne psychiatrique, un niveau global de labilité émotionnelle. Une étude future sur un plus grand échantillon permettra de confirmer ces premiers résultats et d’étudier la structure factorielle de l’instrument. PMID:19881938

  4. L’évaluation systématique des instruments pour mesurer la douleur chez les personnes âgées ayant des capacités réduites à communiquer*

    PubMed Central

    Aubin, Michèle; Giguère, Anik; Hadjistavropoulos, Thomas; Verreault, René

    2007-01-01

    La douleur chronique est souvent sous-détectée et insuffisamment traitée dans les milieux de soins de longue durée. Les outils d’autorapport (ou autoévaluation) de la douleur, comme l’échelle visuelle analogique, n’ont été validés que partiellement chez les populations âgées, en raison de la prévalence élevée de déficits visuels, auditifs, moteurs et cognitifs que l’on y trouve. Des outils d’observation des patients ont été développés pour pallier ces difficultés d’utilisation des échelles d’autorapport de la douleur. Le présent projet vise l’identification de ces échelles et leur évaluation sur la base de la validité de contenu (12 questions), de la validité de construit (12 questions), de la fiabilité (13 questions) et de l’utilité clinique (10 questions). Parmi les 24 instruments recensés, plusieurs apparaissent prometteurs pour évaluer la douleur chez les personnes âgées atteintes de démence sévère. Des efforts additionnels de validation sont cependant requis avant leur intégration à la pratique régulière en soins de longue durée. PMID:17717611

  5. Acceptabilité du test VIH proposé aux nourrissons dans les services pédiatriques, en Côte d'Ivoire, Significations pour la couverture du diagnostic pédiatrique

    PubMed Central

    Oga, Maxime; Brou, Hermann; Dago-Akribi, Hortense; Coffie, Patrick; Amani-Bossé, Clarisse; Ékouévi, Didier; Yapo, Vincent; Menan, Hervé; Ndondoki, Camille; Timité-Konan, M.; Leroy, Valériane

    2014-01-01

    Résumé Problème: Le dépistage VIH chez les enfants a rarement été au centre des préoccupations des chercheurs. Quand le dépistage pédiatrique a retenu l'attention, cela a été pour éclairer seulement sur les performances diagnostiques en ignorant même que le test pédiatrique comme bien d'autres peut s'accepter ou se refuser. Cet article met au cœur de son analyse les raisons qui peuvent expliquer qu'on accepte ou qu'on refuse de faire dépister son enfant. Objectif: Etudier chez les parents, les mères, les facteurs explicatifs de l'acceptabilité du test VIH des nourrissons de moins de six mois. Méthodes: Entretien semi-directif à passages répétés avec les parents de nourrissons de moins de six mois dans les formations sanitaires pour la pesée/vaccination et les consultations pédiatriques avec proposition systématique d'un test VIH pour leur nourrisson. Résultats: Nous retenons que la réalisation effective du test pédiatrique du VIH chez le nourrisson repose sur trois éléments. Primo, le personnel de santé par son discours (qui dénote de ses connaissances et perceptions même sur l'infection) orienté vers les mères influence leur acceptation ou non du test. Secundo, la mère qui par ses connaissances et perceptions même sur le VIH, dont le statut particulier, l'impression de bien-être chez elle et son enfant influence toute réalisation du test pédiatrique VIH. Tertio, l'environnement conjugal de la mère, particulièrement caractérisé par les rapports au sein du couple, sur la facilité de parler du test VIH et sa réalisation chez les deux parents ou chez la mère seulement sont autant de facteurs qui influencent la réalisation effective du dépistage du VIH chez l'enfant. Le principe préventif du VIH, et le désir de faire tester l'enfant ne suffisent pas à eux seuls pour aboutir à sa réalisation effective, selon certaines mères confrontées au refus du conjoint. A l'opposé, les autres mères refusant la r

  6. Distribution épidémiologique de l'infection à VIH chez les femmes enceintes dans les dix régions du Cameroun et implications stratégiques pour les programmes de prévention

    PubMed Central

    Billong, Serge-Clotaire; Fokam, Joseph; Billong, Edson-Joan; Nguefack-Tsague, Georges; Essi, Marie-Josée; Fodjo, Raoul; Sosso, Samuel-Martin; Gomba, Armelle; Mosoko-Jembia, Joseph; Loni-Ekali, Gabriel; Colizzi, Vittorio; Bissek, Anne-Cécile Zoung-Kani; Monebenimp, Francisca; Nfetam, Jean-Bosco Elat

    2015-01-01

    Introduction Le Cameroun se situe dans un contexte d’épidémie généralisée du VIH. La sous-population des femmes enceintes, facilement accessible au sein de la population générale, représente une cible probante pour mener la surveillance du VIH et estimer l’évolution épidémiologique. L'objectif de notre étude était d’évaluer la distribution épidémiologique du VIH chez les femmes enceintes. Méthodes Étude transversale menée en 2012 chez 6521 femmes enceintes (49,3% âgées de 15-24 ans) en première consultation prénatale (CPN1) dans 60 sites des 10 régions Camerounaises. L'algorithme en série a été utilisé pour le sérodiagnostic du VIH. Résultats La prévalence du VIH était de 7,8% (508/6521), avec une différence non significative (p = 0,297) entre milieu rural (7,4%) et milieu urbain (8,1%). En zone rurale, cette prévalence variait de 0,7% à l'Extrême-Nord à 11,8% au Sud. Cependant, en zone urbaine elle variait de 4% à l'Ouest à 11,1% au Sud-Ouest. Suivant l’âge, la prévalence était plus élevée (11,3%) chez les femmes de 35-39 ans. Suivant le niveau de scolarisation, la prévalence du VIH était plus faible (4,4%) chez celles non-scolarisées, et plus élevée (9,3%) chez celles ayant un niveau primaire. Selon la profession, l'infection était plus élevée chez les coiffeuses (15,5%), secrétaires (14,8%), commerçantes (12,9%) et institutrices/enseignantes (10,8%). Conclusion La prévalence du VIH reste élevée chez les femmes enceintes au Cameroun, sans distinction entre milieux rural et urbain. Les stratégies de prévention devraient s'orienter préférentiellement chez les femmes enceintes âgées, celles du niveau d'instruction primaire, et celles du secteur des petites et moyennes entreprises. PMID:26090037

  7. Pontage fémoro-fémoral croisé avec tunnulisation périnéale sous-scrotale pour une infection grave du triangle de scarpa

    PubMed Central

    Mrad, Melek Ben; Miri, Rim; Kaouel, Karim; Derbel, Bilel; Tarzi, Mariem; Ghedira, Faker; Kalfat, Tawfik; Mizouni, Hbiba; Khayati, Adel

    2015-01-01

    Nous décrivons dans cet article une technique de revascularisation des patients ayant une infection de prothèse vasculaire sus-crurale au niveau dutriangle de scarpa, et qui minimise le risque d'infection récurrente du greffon. Cette technique consiste en un pontage fémoro-fémoral croisé avec un tunnel périnéal sous-cutané loin du scarpa infecté que le tunnel classique sus-pubiensous-cutané ne permet pas. Nous rapportons le cas d'un patient âgé de 52 ans, artéritique, multi-opérés, admis pour infection du scarpa droit sur un pontage fémoro-fémoral prothétique perméable, le patient a eu une explantation de ce pontage et une revascularisation par un pontage périnéal sous-scrotal veineux loin du site infectieux; l’évolution a été excellente et le pontage est encore perméable après deux ans de suivi. Le pontage fémoro-fémoral périnéal est une procédure exceptionnellement réalisée, mais qui peut constituer une vraie option thérapeutique de revascularisation chez les patients avec une infection du scarpa. PMID:26955419

  8. Nouvelle structure de capteur à courants de Foucault et algorithme associé pour la mesure des propriétés électrique et magnétique d'un métal

    NASA Astrophysics Data System (ADS)

    Lê, Minh-Quang; Placko, Dominique

    1995-06-01

    This paper describes a new structure for eddy-current transducers which improves sensitivity while maintaining high lateral resolution. We have developed an analytical model to allow a model-based inversion from transducers signals to estimate thick and homogeneous plates electrical conductivity, magnetic permeability and/or lift-off. The inversion procedure is described and shows the possibility of a precise simultaneous estimation of the three parameters. Experiments were conducted with magnetic and non magnetic metals. Cet article décrit une nouvelle structure de capteur à courants de Foucault qui permet d'améliorer la sensibilité du capteur tout en conservant sa résolution latérale. Nous avons développé un modèle analytique de ce capteur qui peut être inversé pour estimer la conductivité électrique, la perméabilité magnétique d'une cible homogène et/ou la distance capteur-cible. La procédure d'inversion a été décrite et montre une possibilité d'estimer ces trois paramètres avec précision. L'expérience a été effectuée sur des métaux magnétiques et amagnétiques.

  9. Utilisation de l'essai comete et du biomarqueur gamma-H2AX pour detecter les dommages induits a l'ADN cellulaire par le 5-bromodeoxyuridine post-irradiation

    NASA Astrophysics Data System (ADS)

    La Madeleine, Carole

    Ce memoire est presente a la Faculte de medecine et des sciences de la sante de l'Universite de Sherbrooke en vue de l'obtention du grade de maitre es sciences (M.Sc.) en radiobiologie (2009). Un jury a revise les informations contenues dans ce memoire. Il etait compose de professeurs de la Faculte de medecine et des sciences de la sante soit : Darel Hunting PhD, directeur de recherche (departement de medecine nucleaire et radiobiologie), Leon Sanche PhD, directeur de recherche (departement de medecine nucleaire et radiobiologie), Richard Wagner PhD, membre du programme (departement de medecine nucleaire et radiobiologie) et Guylain Boissonneault PhD, membre exterieur au programme (departement de biochimie). Le 5-bromodeoxyuridine (BrdU), un analogue halogene de la thymidine reconnu depuis les annees 60 comme etant un excellent radiosensibilisateur. L'hypothese la plus repandue au sujet de l'effet radio sensibilisant du BrdU est qu'il augmente le nombre de cassures simple et double brin lorsqu'il est incorpore dans l'ADN de la cellule et expose aux radiations ionisantes. Toutefois, de nouvelles recherches semblent remettre en question les observations precedentes. Ces dernieres etudes ont confirme que le BrdU est un bon radiosensibilisateur, car il augmente les dommages radio-induits dans l'ADN. Mais, c'est en etant incorpore dans une region simple brin que le BrdU radiosensibilise l'ADN. Ces recherches ont egalement revele pour la premiere fois un nouveau type de dommages produits lors de l'irradiation de l'ADN contenant du BrdU : les dimeres interbrins. Le but de ces travaux de recherche est de determiner si la presence de bromodeoxyuridine dans l'ADN augmente l'induction de bris simple et / ou double brin chez les cellules irradiees en utilisant de nouvelles techniques plus sensibles et specifiques que celles utilisees auparavant. Pour ce faire, les essais cometes et la detection des foci H2AX phosphorylee pourraient permettre d'etablir les effets engendres par

  10. Réactivation d'hépatite virale B chez un patient traité pour lymphome non hodgkinien B diffus à grandes cellules par rituximab: à propos d'un cas

    PubMed Central

    Houssou, Bienvenu; Massi, Romaric Mahutondji; Camara, Marième; Mifdal, Hassan; Nourichafi, Nadia; Zafad, Saadia; Oukkache, Bouchra

    2015-01-01

    La réactivation du virus de l'hépatite B est secondaire à une diminution de l'immunité de l'hôte et peut être suivie d'une poussée d'hépatite aigue potentiellement mortelle. Nous rapportons le cas d'un patient D.H, 47 ans, sexe masculin, AgHBs négatif, jamais transfusé, jamais vacciné contre l'hépatite B qui avait présenté en mars 2013 un LNH B diffus à grandes cellules stade IV par moelle. Traité par 8 cures R-CHOP, il était en rémission complète clinique et paraclinique. Neuf mois après, il fait une rechute de son lymphome classé stade III, associée à une hépatite virale B en réplication virale (18.000 copies/mL): réactivation virale B chez porteur occulte traité avec entécavir 0.5mg par jour pendant 6 mois, l'ADN du VHB était indétectable en fin de traitement. Il avait reçu deux cures de DHAP puis deux cures R-DHAP avec une rémission complète. Lors du recueil des cellules souches en vue de l'autogreffe, l'AgHBs est à nouveau positif. Il a été greffé le 12/01/2015 et continue son traitement antiviral pour 6 mois encore. PMID:26664523

  11. A synergetic approach for estimating the local direct aerosol forcing: Application to an urban zone during the Expérience sur Site pour Contraindre les Modèles de Pollution et de Transport d'Emission (ESCOMPTE) experiment

    NASA Astrophysics Data System (ADS)

    Roger, J. C.; Mallet, M.; Dubuisson, P.; Cachier, H.; Vermote, E.; Dubovik, O.; Despiau, S.

    2006-07-01

    A method dedicated to the investigation of direct radiative forcing of the main anthropogenic aerosol species (ammonium sulfate, black carbon, particulate organic matter) is presented. We computed the direct radiative aerosol forcing at the top of atmosphere (TOA), at the bottom of atmosphere (BOA), and into the atmospheric layer (ATM). The methodology is based on chemical, photometric, and satellite measurements. We first determined the optical properties of the main aerosol species and then computed their direct radiative impact at local scale. The method was applied to a periurban zone during the Expérience sur Site pour Contraindre les Modèles de Pollution et de Transport d'Emission experiment. Optical computations indicate that the single scattering albedo, for the total aerosol population in the external mixture, is equal to 0.83 ± 0.04 at 550 nm, indicative of a strong absorption of the solar radiation. At the same time the mean asymmetry parameter is equal to 0.59 ± 0.04, and the mean aerosol optical thickness is equal to 0.30 ± 0.02, at 550 nm. The anthropogenic urban aerosol layer reduces significantly the daily surface illumination (-24 W m-2 > ΔFBOA > -47.5 W m-2) by reflection to space (-6 W m-2 > ΔFTOA > -9 W m-2) and by absorption of the solar radiation into the atmosphere (17 W m-2 < ΔFATM < 39 W m-2). The available resulting energy in the atmospheric column heats the lowermost part of the atmosphere from 1.1°K d-1 to 2.8°K d-1. Our study shows that the black carbon particles have a large contribution to the BOA forcing (almost 50% of the total daily forcing), whereas the ammonium sulfate particles contribute only to about 10%. Conversely, the TOA daily forcing is mostly driven by the ammonium sulfate aerosol (around 50%).

  12. Conductivite dans le modele de Hubbard bi-dimensionnel a faible couplage

    NASA Astrophysics Data System (ADS)

    Bergeron, Dominic

    Le modele de Hubbard bi-dimensionnel (2D) est souvent considere comme le modele minimal pour les supraconducteurs a haute temperature critique a base d'oxyde de cuivre (SCHT). Sur un reseau carre, ce modele possede les phases qui sont communes a tous les SCHT, la phase antiferromagnetique, la phase supraconductrice et la phase dite du pseudogap. Il n'a pas de solution exacte, toutefois, plusieurs methodes approximatives permettent d'etudier ses proprietes de facon numerique. Les proprietes optiques et de transport sont bien connues dans les SCHT et sont donc de bonne candidates pour valider un modele theorique et aider a comprendre mieux la physique de ces materiaux. La presente these porte sur le calcul de ces proprietes pour le modele de Hubbard 2D a couplage faible ou intermediaire. La methode de calcul utilisee est l'approche auto-coherente a deux particules (ACDP), qui est non-perturbative et inclue l'effet des fluctuations de spin et de charge a toutes les longueurs d'onde. La derivation complete de l'expression de la conductivite dans l'approche ACDP est presentee. Cette expression contient ce qu'on appelle les corrections de vertex, qui tiennent compte des correlations entre quasi-particules. Pour rendre possible le calcul numerique de ces corrections, des algorithmes utilisant, entre autres, des transformees de Fourier rapides et des splines cubiques sont developpes. Les calculs sont faits pour le reseau carre avec sauts aux plus proches voisins autour du point critique antiferromagnetique. Aux dopages plus faibles que le point critique, la conductivite optique presente une bosse dans l'infrarouge moyen a basse temperature, tel qu'observe dans plusieurs SCHT. Dans la resistivite en fonction de la temperature, on trouve un comportement isolant dans le pseudogap lorsque les corrections de vertex sont negligees et metallique lorsqu'elles sont prises en compte. Pres du point critique, la resistivite est lineaire en T a basse temperature et devient

  13. Pouring 'Cold Water' on Hot Accretion

    NASA Astrophysics Data System (ADS)

    Rubin, A. E.

    1995-09-01

    The extensive recrystallization of type-6 OC has been interpreted as having resulted either from prograde thermal metamorphism of initially cold, unequilibrated material [1,2] or from autometamorphism due to slow cooling of material that accreted while still hot (1000-1200 K). Although the physical implausibility of hot accretion has been addressed [3], no comprehensive evaluation has been made of arguments in its favor. As shown below, these arguments are based on incomplete data, flawed experiments or improbable interpretations. Correlation between petrologic type and Ca in low-Ca pyroxene. Models of prograde metamorphism assume that, with increasing temperature, opx acquires Ca at the expense of diopside. Analyses of pyroxene in 10 H chondrites showed no correlation between Ca in pyroxene cores and increasing petrologic type [4], but more extensive data sets show such correlations [1,5,6]. A review of data for 51 OC [7] shows a progressive increase in the Wo content of low-Ca pyroxene with petrologic type: Wo 0.4-1.2 in type-3 and -4; Wo 1.2-1.6 in type-5; and Wo 1.6-2.2 in type-6. Striated opx. Undeformed striated opx were interpreted as having formed from inverted protopyroxene during slow cooling [8]; striated opx from H4 Quenggouk were found to convert into normal opx within 1 week during annealing at 1100 K [9]. Because prograde metamorphism probably lasted ~60 Ma [10], there should be no striated opx remaining in type-4 or -5 OC. However, samples of 99% twinned clinopyroxene (analogous to that in chondrules in type-3 OC) annealed for >3 weeks at <=1250 K exhibited only very minor inversion to opx [11-13]. These experiments are consistent with prograde metamorphism; it seems likely that Quenggouk pyroxene probably had a substantial proportion of opx lamellae to begin with. Spinodal decomposition textures and cooling rates. Spinodal decomposition textures in pyroxene in type 4-5 OC were observed to have the same periodicities as those in type-3 OC [14]; it was concluded that the textures must have formed during cooling after hot accretion. However, because spinodal decomposition textures develop over the temperature range 1400-1100 K [14,15] and type-4 and -5 OC were probably not heated above 1000 K and 1050 K, respectively [16], these textures are probably relicts of chondrule formation. It was also suggested [14] that compositional zoning in pyroxenes indicates that type-3 OC cooled more rapidly than type-4 to -5 OC. However, OC metallographic cooling rates are not correlated with petrologic type [17]. Furthermore, experimental data [13] show that rare thick opx lamellae in H4 Conquista could not have formed during single stage cooling as expected in autometamorphism; a two-stage cooling history involving rapid cooling during chondrule formation followed by parent-body annealing is more plausible. Polycrystalline taenite. Polycrystalline taenite in H/L3 Tieschitz was interpreted as a relict solidification structure that failed to anneal into monocrystalline taenite because of rapid cooling (1700 to 1000 K within days to weeks) [18]; by analogy, it was proposed that all H3-6 chondrites containing polycrystalline taenite cooled rapidly from 1700 K [4], an idea inconsistent with prograde metamorphism. However, cooling rates in equilibrated chondrites that were slow enough to permit significant growth of kamacite would erase prior solidification zoning in taenite by solid-state diffusion [19,20]. This hypothesis, confirmed by computer modeling [21], invalidates the assumption that equilibrated OC containing polycrystalline taenite cooled rapidly. Polycrystalline taenite is most likely a pre-metamorphic relict. Heterogeneous metal grains. Compositionally and texturally heterogeneous metal grains in L6 Bruderheim are unlikely to have survived solid-state diffusion during prograde metamorphism [22]; these authors favored hot accretion followed by low-temperature annealing. However, Bruderheim is a fragmental breccia of shock stage S4 [23] containing partly melted metal grains and opaque veins; heterogeneities in metallic Fe-Ni grains are due to post-metamorphic shock. Misshapen chondrules. A small proportion of chondrules in Tieschitz are non-spherical and seem to have molded themselves around one another while they were at least partly molten, possibly on the surface of a hot asteroid [24]. However, it is now clear that these conjoined objects are adhering or enveloping compound chondrules that fused in the nebula [25]; most are probably siblings that collided shortly after forming in the same heating event. Objects adjacent to the compound chondrules are separated by intervening matrix material; because matrix material is fine grained, porous, highly disequilibrated and unmelted [26,27], any complementarity in shape between adjacent objects and compound chondrules is either due to coincidence or jostling during chondrite compaction. Natural remanent magnetization (NRM). The orientations of the stable NRM in OC were found to be random at scales of ~1 mm3 [28]. Because metamorphic heating would erase the random magnetization, these authors opted for hot accretion. However, most OC appear to be fragmental breccias that contain scattered metal and silicate grains of aberrant compositions that were incorporated into their hosts after metamorphic equilibration [29,30]; by analogy to some CM chondrites which contain mm-size clasts that experienced different degrees of aqueous alteration [31], it is plausible that OC are also brecciated on mm-size scales. Such fine-scale brecciation could account for the random orientations of the stable NRM. References: [1] Dodd R. T. (1969) GCA, 33, 161-203. [2] McSween H. Y. et al. (1988) in Meteorites and the Early Solar System, 102-113, Univ. of Arizona, Tucson. [3] Haack H. et al. (1992) GRL, 19, 2235-2238. [4] Hutchison R. et al. (1980) Nature, 287, 787-790. [5] Keil K. and Fredriksson K. (1964) JGR, 69, 3487-3515. [6] Heyse J. V. (1978) EPSL, 40, 365-381. [7] Scott E. R. D. et al. (1986) Proc. LPSC 17th, in JGR, 91, E115-E123. [8] Ashworth J. R. (1980) EPSL, 46, 167-177. [9] Ashworth J. R. et al. (1984) Nature, 308, 259-261. [10] G"pel C. et al. (1994) EPSL, 121, 153-171. [11] Jones R. H. and Brearley A. J. (1988) Meteoritics, 23, 277. [12] Brearley A. J. and Jones R. H. (1988) Eos Trans. AGU, 69, 1506. [13] Brearley A. J. and Jones R. H. (1993) LPS XXIV, 185-186. [14] Watanabe S. et al. (1985) EPSL, 72, 87-98. [15] Robinson P. et al. (1977) Am. Mineral., 62, 857-873. [16] Dodd R. T. (1981) Meteorites: A Petrologic-Chemical Synthesis, Cambridge. [17] Taylor G. J. (1987) Icarus, 69, 1-13. [18] Bevan A. W. R. and Axon H. J. (1980) EPSL, 47, 353-360. [19] Scott E. R. D. and Rajan R. S. (1981) GCA, 45, 53-67. [20] Scott E. R. D. and Rajan R. S. (1981) GCA, 45, 1959. [21] Willis J. and Goldstein J. I. (1981) Nature, 293, 126-127. [22] Smith D. G. W. and Launspach S. (1991) EPSL, 102, 79-93. [23] St"ffler D. et al. (1991) GCA, 55, 3845-3867. [24] Hutchison R. et al. (1979) Nature, 280, 116-119. [25] Wasson J. T. et al. (1995) GCA, 59, 1847-1869. [26] Scott E. R. D. et al. (1984) GCA, 48, 1741-1757. [27] Nagahara H. (1984) GCA, 48, 2581-2595. [28] Morden S. J. and Collinson D. W. (1992) EPSL, 109, 185-204. [29] Scott E. R. D. et al. (1985) Proc. LPSC 16th, in JGR, 90, D137-D148. [30] Rubin A. E. (1990) GCA, 54, 1217-1232. [31] Rubin A. E. and Wasson J. T. (1986) GCA, 50, 307-315.

  14. Effet de la substitution du cuivre par du lithium sur les proprietes de l'oxyde spinelle lithium(x)cuivre(y-x)cobalt(3-y)oxygen(4) etudie pour l'electrocatalyse de la reaction de degagement de l'oxygene en milieu alcalin

    NASA Astrophysics Data System (ADS)

    Fatih, Khalid

    L'electrolyse de l'eau demeure la seule technologie industrielle de generation de l'hydrogene et de l'oxygene tres purs sans rejet de CO2 dans l'atmosphere, ce qui le rend tres attrayant par rapport a la combustion de carburants fossiles qui provoque presentement de serieux problemes environnementaux. Dans le but d'ameliorer le rendement de ce procede, nous avons developpe de nouveaux materiaux d'anode peu couteux, a base de l'oxyde mixte CuyCo3-yO 4, qui possedent une cinetique rapide pour la reaction de degagement de l'oxygene (RDO). Cette reaction suscite un interet particulier en raison de la surtension d'activation relativement elevee a l'anode qui cause la principale perte de rendement du procede. Une etude systematique a ete effectuee sur la substitution du Cu par du Li (0 a 40%), afin d'elucider les proprietes electrocatalytiques des oxydes LixCuy-xCo3-yO4. Ces oxydes, prepares sous forme de poudres par decomposition thermique des nitrates precurseurs entre 300 et 500°C, ont montre (DRX et FTIR) une structure spinelle inverse non-stcechiometrique avec une diminution du volume de la maille cristalline. La surface specifique par BET est d'environ 6 m2 g-1. Le pcn, obtenu par titrage acido-basique, a indique une diminution de la force du lien M-OH avec le taux du Li dans l'oxyde. Les analyses par XPS, realisees sur des films d'oxyde prepares par nebulisation reactive sur un substrat lisse de nickel, revelent un enrichissement de la surface en Cu a partir de 30% Li, et la presence des cations de surface Co2+, Co3+, Cu +, Cu2+ et Cu3+. La concentration de ce dernier montre un maximum a 10 et 20% Li. Suite a la substitution du Cu par du Li, la compensation de la charge serait assuree principalement par la formation d'especes Cu3+ pour les oxydes contenant jusqu'a 20% Li, et par la formation d'especes Co3+ aux taux de substitution superieurs. Les micrographies MEB montrent une morphologie hemispherique des particules d'oxyde reparties uniformement sur le substrat

  15. Réalisation d'un appareillage a lame vibrante pour l'étude des lignes de flux dans les supraconducteurs à haute température critique

    NASA Astrophysics Data System (ADS)

    Woirgard, J.; Salmon, E.; Gaboriaud, R. J.; Rabier, J.

    1994-03-01

    éalisés sur une couche mince épitaxiée de 1000 Å d'épaisseur d'YBaCuO ont permis de mettre en évidence un pic d'amortissement, de grande amplitude, qui pourrait être dû à la fusion du réseau de vortex. Prochainement, cet appareillage sera employé pour l'étude de l'ancrage des lignes de flux sur les défauts du réseau cristallin, défauts naturels ou artificiels créés par implantation ionique dans les films minces ou par déformation plastique dans les échantillons massifs.

  16. An international comparison of mass fraction purity assignment of digoxin: The Comité Consultatif pour la Quantité de Matière (CCQM) Pilot Study CCQM-P20.f (Digoxin)

    NASA Astrophysics Data System (ADS)

    Westwood, S.; Josephs, R.; Choteau, T.; Mesquida, C.; Daireaux, A.; Wielgosz, R.; Davies, S.; Windust, A.; Kang, M.; Ting, H.; Kato, K.; Frias, E.; Pérez, M.; Apps, P.; Fernandes-Whaley, M.; Wiangnon, K.; Ruangrittinon, N.; Wood, S.; LeGoff, T.; Duewer, D.; Schantz, M.; Siekmann, L.; Esker, J.

    2011-01-01

    Under the auspices of the Organic Analysis Working Group (OAWG) of the Comité Consultatif pour la Quantité de Matière (CCQM) a laboratory comparison, CCQM-P20.f, was coordinated by the Bureau International des Poids et Mesures (BIPM) in 2007/2008. Nine national measurement institutes, four expert laboratories and the BIPM participated in the comparison. Participants were required to assign the mass fraction of digoxin present as the main component in the comparison sample (CCQM-P20.f) which consisted of digoxin material obtained from a commercial supplier stated to comply with USP requirements. In addition to assigning the mass fraction content of digoxin for the material, participants were requested, but not obliged, to provide mass fraction estimates for the minor components they identified in each sample. In contrast with the previous round of the CCQM-P20 series, in which the mass fraction content of theophylline in two comparison samples (CCQM-P20.e.1 and CCQM-P20.e.2) was determined, a wider range of results were reported for the mass fraction content of digoxin in the CCQM-P20.f comparison. A minority of participants did not appear to use conditions capable of fully resolving and/or quantifying the major related structure impurities present in the comparison sample. Among those that did achieve suitable separations, there was further variation in their reported quantifications of the individual and total related substance content which reflected in part the limited availability of reference standards for these materials and the resulting assumptions that had to be made regarding the structure and response factors relative to digoxin for each individual impurity. This was particularly relevant because of the span of molecular masses of the impurities present in the sample, which ranged from aglycones to glycones with tetrameric carbohydrate chains, relative to that of digoxin. A significant additional factor also contributed to the observed variation of

  17. Profil infectieux et mortalité des enfants âgés de 0 à 5 ans admis pour malnutrition aiguë sévère: étude de cohorte rétrospective au Centre Nutritionnel et Thérapeutique de Bukavu, République Démocratique du Congo

    PubMed Central

    Kambale, Richard Mbusa; Kasengi, Joe Bwija; Kivukuto, John Mutendela; Cubaka, Liévin Murhula; Mungo, Bruno Masumbuko; Balaluka, Ghislain Bisimwa

    2016-01-01

    Introduction La malnutrition constitue une toile de fond sur laquelle se greffent plusieurs infections. L'objectif de ce travail est de déterminer les infections les plus létales, la durée médiane de séjour et le gain pondéral médian journalier des enfants malnutris. Méthodes Étude de cohorte rétrospective des enfants malnutris de 0 à 59 mois hospitalisés au Centre Nutritionnel et Thérapeutique de Bukavu du 1er janvier 2011 au 31 décembre 2013. L’évaluation du risque de survenue de décès par complication infectieuse a été faite par la mesure du risque relatif. Nous avons utilisé le test de Mann-Whitney pour comparer les médianes. Les Odd ratio ajustés par régression logistique et leurs intervalles de confiance à 95% du risque de mortalité ont été donnés pour chaque cause infectieuse. Résultats Au total, 574 enfants avaient été inclus. Cinq cent vingt et un (90.8%) enfants étaient sortis guéris, 10 (1.7%) avaient abandonné le traitement et 43 (7.5%) étaient décédés. La durée médiane de séjour était de 19 (13-26) jours et le gain pondéral médian journalier était de 7 (3-13) g/kg/j. Il existait une association statistiquement significative entre la mortalité et le sepsis / choc septique (p = 0,0004), la méningite (p = 0,00001), et l'infection à VIH (p = 0,02). Conclusion Une meilleure prise en charge de la malnutrition aigüe dans notre région devrait se baser sur la mise en place des unités spécialisées et bien équipées pour la prise en charge de la malnutrition associées aux infections sévères. PMID:27279964

  18. Competition entre supraconductivite et magnetisme au voisinage de la transition de Mott dans le conducteur organique quasi-bidimensionnel k-(BEDT-TTF)2copper[N(CN)2]bromine

    NASA Astrophysics Data System (ADS)

    Fournier, David

    Les conducteurs organiques quasi-bidimensionnels kappa-ET2X presentent d'importantes similitudes avec les SCHT telles qu'une phase isolant de Mott, un regime de pseudogap et un etat supraconducteur. L'etude de leurs proprietes apparait donc complementaire. Parmi les interrogations persistantes concernant la physique de ces systemes, l'origine du (ou des) processus exotique d'appariement, responsable de la supraconductivite est le sujet suscitant l'interet le plus marque dans la communaute. L'hypothese d'un mecanisme lie a la proximite d'un etat antiferromagnetique est privilegiee. Une etape importante dans la resolution de cette problematique est l'identification de la symetrie du parametre d'ordre. D'apres de nombreux travaux sur les systemes fortement correles, la sonde ultrasonore, de par sa sensibilite aux excitations de quasiparticule a basse temperature, est consideree comme particulierement adaptee a l'etude de cette propriete. Cependant, son emploi necessite l'utilisation d'un compose metallique a basse temperature et completement supraconducteur. Le compose metallique organique kappa-ET 2Cu[N(CN)2]Br presente toutes les caracteristiques necessaires a l'etude de cette propriete. En effet, il est situe loin de la transition du premier ordre de Mott et est completement supraconducteur. De facon surprenante, ce systeme semble se coupler fortement avec le reseau ce qui augmente significativement la sensibilite de cette sonde aux proprietes du gaz electronique. Cependant, des difficultes techniques importantes, liees a la nature intrinseque de ce materiau, doivent etre surmontees pour proceder a des mesures suivant differentes polarisations. La presente etude a profondement modifie notre comprehension de ce systeme. En effet, ces mesures ont permis de constater que le kappa-ET2Cu[N(CN)2]Br est un compose qui est situe en bordure de la zone de coexistence entre la supraconductivite et le magnetisme, ce qui constitue un resultat totalement inattendu. De plus, la

  19. Utilisation de traceurs radioactifs pour l'évaluation du recrutement des leucocytes et des échanges vasculaires au niveau d'organes in~vivo. Description d'une méthode et discussion des problèmes d'interprétation sur quelques exemples

    NASA Astrophysics Data System (ADS)

    Bureau, M. F.

    1997-03-01

    An experimental method using simultaneously different γ emiter tracers was developed to evaluate inflammation in vivo. Experiments were performed on the anaesthetized guinea-pig to test pulmonary effects of inflammatory agents. Red blood cells, albumin and inflammatory cells (platelets or leucocytes) radiolabelled with 99m technetium, 131 iodine and 111 indium respectively were injected i.v. Their radioactivities were measured on a pulmonary region by external detection and on blood samples in a well type counter. From these measurements variations of the lung contents in red blood cells, extravascular albumin and non circulating leucocytes during inflammatory stimulation were evaluated. These parameters axe indexes of blood perfusion, vascular exchanges and leucocyte sequestration respectively. Fiability of the method and meaning of the parameters evaluated are discussed. Une méthode expérimentale utilisant simultanément différents traceurs γ a été développée pour évaluer l'inflammation in vivo. Des expériences ont été réalisées chez le cobaye anesthésié pour tester l'effet pulmonaire d'agents inflammatoires. Des globules rouges, de l'albumine et des cellules inflammatoires (plaquettes ou leucocytes) radiomarqués respectivement au technetium 99m, à l'iode 131 et à l'indium 111 sont injectés i.v. Leurs radioactivités sont mesurées sur une région pulmonaire par détection externe et sur des échantillons sanguins au compteur puit. À partir de ces mesures sont évaluées les variations des contenus pulmonaires en globules rouges, en albumine extravasculaire et en leucocytes non circulants lors d'une stimulation inflammatoire. Ces paramètres sont corrélés aux modifications de la perfusion, des échanges vasculaires et de la séquestration leucocytaire. La fiabilité de la méthode et la signification des paramètres évalués sont discutées.

  20. Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

    NASA Astrophysics Data System (ADS)

    Veres, Teodor

    Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques

  1. It's Raining, It's Pouring...But Not Necessarily Boring.

    ERIC Educational Resources Information Center

    Cotler, Harold

    1980-01-01

    Described are 16 rainy day activities which can be played in the classroom or adapted to the outdoors when the rain clears. The material for this article was taken from the book "Galaxy of Games, Stunts, and Activities for Elementary Physical Education." (KC)

  2. Partners in Quality: Communities = Partenaires pour la qualite: Collectivites.

    ERIC Educational Resources Information Center

    Kaiser, Barbara; Rasminsky, Judy Sklar

    Partners in Quality is a research and development project sponsored by the Canadian Child Care Federation and its affiliates to explore how child care providers, parents, and other partners can work together to support and improve quality in child care. This booklet, in both English and French, is the fourth in a series to support child care…

  3. Lubricating oil containing dispersant VII and pour depressant

    SciTech Connect

    Hart, W.P.; Liu, C.S.

    1987-05-26

    This patent describes a functionalized polymer capable of use as an additive in lubricating oils. The process comprises first units, derived from first monomer containing an ethylenically unsaturated carbon-to-carbon double bond; and second units, derived from a different second monomer, a dicarboxylic acid anhydride containing an ethylenically unsaturated carbon-to-carbon double bond; and the polymer bearing, bonded to the dicarboxylic-acid-derived moiety, functionalizing groups derived from: a primary or secondary functionalizing amine R/sup 7//sub 2/(NR/sup 9/)/sub ..cap alpha../NR/sup 8//sub 2/ where R/sup 7/ is alkyl, alkaryl, aralkyl, cycloalkyl, or aryl hydrocarbon, R/sup 8/ is hydrogen or selected from the same group as in R/sup 7/, R/sup 9/ is alkylene, aralkylene, cycloalkylene, alkarylene, or arylene, and a is 0.20. The amine is bonded to the polymer through a nitrogen atom of the amine group; and, a functionalizing Mannich base is formed by reacting a phenol containing an active hydrogen atom, an aldehyde and a primary or secondary polyamine. The Mannich base is bonded to the polymer through a nitrogen atom of the amine group.

  4. Equivalents dynamiques pour l'etude de la stabilite transitoire

    NASA Astrophysics Data System (ADS)

    El Aouni, Wassil

    Today's transient stability (TS) studies are a necessary tool to predict power systems behavior after the occurring of huge faults (ex: short-circuit, generator's lost, etc.). These studies allow us to plan the necessary actions to take in order to maintain the required levels of availability and quality of the electricity production. However, because of the fast increase of the size and the complexity of the power systems, these (TS) studies require higher duration and efforts for their calculations to be processed. The problem of this thesis is therefore: How to reduce the (TS) programs duration and calculation efforts while keeping the precision of their results? In order to resolve this problem, an initial literature review was performed. This literature review allowed us to notice that power systems reduction techniques used to decrease duration of (TS) simulation programs were designed long time ago. These techniques have the common goal of reducing the (TS) simulation duration and effort while keeping the same original power system dynamic behavior. This literature review leaded us also to choose a four steps power system reduction method: In the first step, the power system internal and external zones are chosen. In the second step the power system external zone generators able to be aggregated together are identified using the slow coherency method in addition to a time domain (TS) simulation. In the third step, dynamic parameters of the equivalent reduced network machines are derived using the structure preserving method which has the advantage of being useful for both classical and detailed power systems models. In the fourth step, the equivalent power system admittance matrix is processed using Zhukov method. The method proposed to resolve the problem of this thesis was afterwards implemented under Matlab(c) functions format. These aggregation functions were validated in the case of (TS) and (SIME) programs for the two following test network: " New England " 10 machines 39 buses under classical and detailed models, and the IEEE 50 machines 145 buses under classical model. PSSE(c) industrial software was also used in order to validate the results. The designed aggregation functions allowed us to have a significant increase of the speed of the (TS) and (SIME) programs while keeping a good accuracy of their outputs.

  5. E-mail et Web : pour une navigation sans risque

    SciTech Connect

    2010-06-28

    Présentation orale en français, support visuel en anglais. À travers des exemples concrets, vous consoliderez vos connaissances et pourrez ainsi réajuster vos habitudes concernant l’utilisation sécurisée de votre boîte e-mail et de votre navigateur Web.

  6. Une vie active saine pour les enfants et les adolescents

    PubMed Central

    2002-01-01

    De mauvais modes de vie, comme une alimentation malsaine et l’inactivité physique, sont d'importants facteurs contributifs à une augmentation de la morbidité et de la mortalité secondaires à des maladies chroniques à l’âge adulte. Depuis dix ans, on remarque une augmentation du mode de vie sédentaire et de l’obésité chez les enfants et les adolescents, tant en Amérique du Nord qu’ailleurs dans le monde. Les médecins doivent être conscients de l’importance du problème, fournir des conseils de prévention aux familles et promouvoir une vie active saine dans leur pratique.

  7. Inhibiteurs de la pompe à protons pour les nourrissons irritables

    PubMed Central

    Smith, Christine H.; Israel, David M.; Schreiber, Richard; Goldman, Ran D.

    2013-01-01

    Résumé Question Les pleurs sont communs chez les nourrissons; par ailleurs, prendre soin d'un nourrisson dont les pleurs sont inconsolables et qu'on surnommait aussi auparavant des coliques ou un reflux, peut souvent causer une détresse extrême aux parents. Le recours à un agent de suppression de l'acide gastrique (p. ex. les inhibiteurs de la pompe à protons [IPP]) est-il bénéfique chez ces nourrissons? Réponse On utilise de plus en plus les IPP chez les nourrissons et les enfants depuis quelques années. L'efficacité des inhibiteurs de la pompe à protons n'a pas été démontrée dans le traitement de l'irritabilité et des pleurs excessifs chez des enfants autrement en santé de moins de 3 mois. D'autre part, si les IPP sont généralement bien tolérés, il existe certaines données probantes reliant l'utilisation des IPP avec une susceptibilité accrue aux gastroentérites aiguës, à la pneumonie acquise dans la communauté et à des troubles de l'utilisation et de l'absorption des nutriments. Indépendamment des traitements, les pleurs et l'irritabilité durant la tendre enfance s'améliorent généralement avec le temps. Entre-temps, les inhibiteurs de la pompe à protons n'améliorent pas les symptômes.

  8. E-mail et Web : pour une navigation sans risque

    ScienceCinema

    None

    2011-10-06

    Présentation orale en français, support visuel en anglais. À travers des exemples concrets, vous consoliderez vos connaissances et pourrez ainsi réajuster vos habitudes concernant l?utilisation sécurisée de votre boîte e-mail et de votre navigateur Web.

  9. Promouvoir Une Energie Durable Pour Tous (French Fact Sheet)

    SciTech Connect

    Not Available

    2012-06-01

    The Clean Energy Solutions Center, an initiative of the Clean Energy Ministerial and UN-Energy, helps governments design and adopt policies and programs that support the deployment of transformational low-carbon technologies. The Solutions Center serves as a first-stop clearinghouse of clean energy policy reports, data, and tools and provides expert assistance and peer-to-peer learning forums. This factsheet highlights key Solutions Center offerings, including 'ask an expert' assistance on clean energy policy matters, training and peer learning, and technical resources for policy makers worldwide.

  10. Planification de trajectoires pour une flotte d'UAVs

    NASA Astrophysics Data System (ADS)

    Ait El Cadi, Abdessamad

    In this thesis we address the problem of coordinating and controlling a fleet of Unmanned Aerial Vehicles (UAVs) during a surveillance mission in a dynamic context. The problem is vast and is related to several scientific domains. We have studied three important parts of this problem: • modeling the ground with all its constraints; • computing a shortest non-holonomic continuous path in a risky environment with a presence of obstacles; • planning a surveillance mission for a fleet of UAVs in a real context. While investigating the scientific literature related to these topics, we have detected deficiencies in the modeling of the ground and in the computation of the shortest continuous path, two critical aspects for the planning of a mission. So after the literature review, we have proposed answers to these two aspects and have applied our developments to the planning of a mission of a fleet of UAVs in a risky environment with the presence of obstacles. Obstacles could be natural like mountain or any non flyable zone. We have first modeled the ground as a directed graph. However, instead of using a classic mesh, we opted for an intelligent modeling that reduces the computing time on the graph without losing accuracy. The proposed model is based on the concept of visibility graph, and it also takes into account the obstacles, the danger areas and the constraint of non-holonomy of the UAVs- the kinematic constraint of the planes that imposes a maximum steering angle. The graph is then cleaned to keep only the minimum information needed for the calculation of trajectories. The generation of this graph possibly requires a lot of computation time, but it is done only once before the planning and will not affect the performance of trajectory calculations. We have also developed another simpler graph that does not take into account the constraint of non-holonomy. The advantage of this second graph is that it reduces the computation time. However, it requires the use of a correction procedure to make the resulting trajectory non-holonomic. This correction is possible within the context of our missions, but not for all types of autonomous vehicles. Once the directed graph is generated, we propose the use of a procedure for calculating the shortest continuous non-holonomic path in a risky environment with the presence of obstacles. The directed graph already incorporates all the constraints, which makes it possible to model the problem as a shortest path problem with resource a resource constraint (the resource here is the amount of permitted risk). The results are very satisfactory since the resulting routes are non-holonomic paths that meet all constraints. Moreover, the computing time is very short. For cases based on the simpler graph, we have created a procedure for correcting the trajectory to make it non-holonomic. All calculations of non-holonomy are based on Dubins curves (1957). We have finally applied our results to the planning of a mission of a fleet of UAVs in a risky environment with the presence of obstacles. For this purpose, we have developed a directed multi-graph where, for each pair of targets (points of departure and return of the mission included), we calculate a series of shorter trajectories with different limits of risk -- from the risk-free path to the riskiest path. We then use a Tabu Search with two tabu lists. Using these procedures, we have been able to produce routes for a fleet of UAVs that minimize the cost of the mission while respecting the limit of risk and avoiding obstacles. Tests are conducted on examples created on the basis of descriptions given by the Canadian Defense and, also on some instances of the CVRP (Capacitated Vehicle Routing Problem), those described by Christofides et Elion and those described by Christofides, Mingozzi et Toth. The results are of very satisfactory since all trajectories are non-holonomic and the improvement of the objective, when compared to a simple constructive method, achieves in some cases between 10 % and 43 %. We have even obtained an improvement of 69 %, but on a poor solution generated by a greedy algorithm. (Abstract shortened by UMI.)

  11. Loi constitutive chimioplastique pour le beton expose aux hautes temperatures

    NASA Astrophysics Data System (ADS)

    Hammoud, Rabah

    Concrete is the most widely used construction material in the world. Even though it has been used for several centuries, its behavior to high temperature remains to be understood. In the light of recent extreme events, including accidents, and arson, special attention has been focused on the performance of concrete in the fire safety assessment of buildings and tunnels. Fire represents one of the most severe conditions encountered during the life-time of a structure. Concrete exposed to high temperature can significantly jeopardize the structural integrity and load bearing capacity of the structure. Spalling of concrete remains one of the main issues to be addressed in the case of fire in buildings and tunnels. Successful modeling of this phenomenon depends not only on the accurate prediction of the temperature distribution through structural concrete but also on its mechanical response to the heating and boundaries restrains conditions and the migration of moisture and associated pore pressures. Therefore, it is necessary to develop a reliable formulation of concrete with all required information to understand its behavior during and after exposure to elevated temperature. It is also necessary to properly assess the effects of thermal degradation in order to develop predictive tools and validate design codes. Many structural problems can be adequately worthy by an elastoplastic model. The ultimate goal of this study is the development of a new constitutive model under a chemoplastic framework. To do this, an experimental program is carried out. The purpose of this program is twofold. First, it is essential to calibrate the proposed constitutive law that will be developed, and, second, for defining an inverse a problem. Usually, uniaxial and triaxial tests, conducted with confining pressure varied between 1.3 and 24 MPa and a temperature up to 700°C, allow us to identify the constitutive law parameters. This law reproduces the reduced field strength due to degradation of exothermic origin. This experimental program puts emphasis on the fragile nature of the preheated concrete and demonstrates the non-applicability of two failure criteria often used in engineering calculation. An alternative is proposed and well-tested. Indeed, exposing the concrete to high temperature results in irreversible loss of stiffness as well as a loss of decohesion strength. These losses are, typically, expressed through semi-empirical relationships of the mechanical properties with temperature. Unfortunately, these relationships are inadequate because the direct impact of this degradation, on the macroscopic scale, can result in a dependency relationship between the elastic properties and the hydrates mass. Therefore, unlike traditional methods using conventional elasto-plastic models and adjusting certain parameters with local temperature, the proposed constitutive law that incorporates a function of dehydration similar to the softening index in chemo-plastics gives good results. An Etse and Willam similar criterion is used and modified for the occasion. Hardening and softening mechanisms are then needed to expand and contract the loading surface for defining the strength of the concrete on a wide range of dehydration processes. The direction and magnitude of a permanent deformation, core of the inelastic domain, are defined through the development of non-associated chemoplastic potential and new curve of ductility. The influence of hydrostatic pressure (dilatancy) and dehydration on the concrete behavior are taken into account in our model. The model is implemented in the Matlab(c) code. Strains and stresses generated in the concrete are now accurately predicted. To illustrate the capabilities of the developed model to predict the complex behavior of concrete exposed to high temperature, simulations are performed through numerical loading paths scenarios. The model is able to accurately reproduce all the experimental data.

  12. Pour une pedagogie eclectique (For an Eclectic Pedagogy)

    ERIC Educational Resources Information Center

    Lince, Raoul

    1976-01-01

    This article criticizes the systematic use of audio-visual methods in second language teaching because of the imprecise semantic impression they may leave on the student. The use of translation exercises is proposed as an alternative. (Text is in French.) (CDSH/CLK)

  13. Pour une Sociologie des Apprentissages (Toward a Sociology of Learning)

    ERIC Educational Resources Information Center

    Porcher, Louis

    1977-01-01

    A language, a social practice, cannot be taught or learned apart from determining sociological factors. The effect of this sociological understanding on foreign language methodology, particularly the functional approach, and learner-centered education is discussed. (Text is in French.) (AMH)

  14. HUBBLE FINDS A BARE BLACK HOLE POURING OUT LIGHT

    NASA Technical Reports Server (NTRS)

    2002-01-01

    NASA's Hubble Space Telescope has provided a never-before-seen view of a warped disk flooded with a torrent of ultraviolet light from hot gas trapped around a suspected massive black hole. [Right] This composite image of the core of the galaxy was constructed by combining a visible light image taken with Hubble's Wide Field Planetary Camera 2 (WFPC2), with a separate image taken in ultraviolet light with the Faint Object Camera (FOC). While the visible light image shows a dark dust disk, the ultraviolet image (color-coded blue) shows a bright feature along one side of the disk. Because Hubble sees ultraviolet light reflected from only one side of the disk, astronomers conclude the disk must be warped like the brim of a hat. The bright white spot at the image's center is light from the vicinity of the black hole which is illuminating the disk. [Left] A ground-based telescopic view of the core of the elliptical galaxy NGC 6251. The inset box shows Hubble Space Telescope's field of view. The galaxy is 300 million light-years away in the constellation Ursa Minor. Photo Credit: Philippe Crane (European Southern Observatory), and NASA

  15. Foreign Students Pour Back into the U.S.

    ERIC Educational Resources Information Center

    McMurtrie, Beth

    2008-01-01

    This article reports that the number of international students enrolled in American colleges in the fall of 2007 shattered previous records and represents the largest one-year increase in decades, according to new data from the Institute of International Education. Educators and government officials say the bounce indicates that hostile…

  16. Partners in Quality: Infrastructure = Partenaires pour la qualite: Infrastructure.

    ERIC Educational Resources Information Center

    Kaiser, Barbara; Rasminsky, Judy Sklar

    Partners in Quality is a research and development project sponsored by the Canadian Child Care Federation and its affiliates to explore how child care providers, parents, and other partners can work together to support and improve quality in child care. This booklet, in both English and French, is the third in a series to support child care…

  17. Carbon nano structures: Production and characterization

    NASA Astrophysics Data System (ADS)

    Beig Agha, Rosa

    recherche sur l'hydrogene (IRH). Nos echantillons presentaient toujours une grande quantite de carbure de fer au detriment de la formation de nanostructures de carbone. Apres plusieurs mois de recherche nous avons constate que les metaux de base, soit le fer et le cobalt, etaient contamines. Neanmoins, ces recherches nous ont enseigne beaucoup et les resultats sont presentes aux Appendices I a III. Le carbone de depart est du charbon active commercial (CNS201) qui a ete prealablement chauffe a 1,000°C sous vide pendant 90 minutes pour se debarrasser de toute humidite et autres impuretes. En premiere etape, dans un creuset d'acier durci du CNS201 pretraite fut melange a une certaine quantite de Fe et de Co (99.9 % purs). Des proportions typiques sont 50 pd. %, 44 pd. %, et 6 pd. % pour le C, le Fe, et le Co respectivement. Pour les echantillons prepares avec le broyeur SPEX, trois a six billes en acier durci furent utilisees pour le broyage, de masse relative echantillon/poudre de 35 a 1. Pour les echantillons prepares avec le broyeur planetaire, trente-six billes en acier durci furent utilisees pour le broyage, de masse relative echantillon/poudre de 10 a 1. L'hydrogene fut alors introduit dans le creuset pour les deux types de broyeur a une pression de 1.4 MPa, et l'echantillon fut broye pendant 12 h pour le SPEX et 24 h pour le planetaire. Le broyeur SPEX a un rendement de transfert d'energie mecanique plus grand qu'un broyeur planetaire, mais il a le desavantage de contaminer davantage l'echantillon en Fe par attrition. Cependant, ceci peut etre neglige vu que le Fe etait un des catalyseurs metalliques ajoutes au creuset. En deuxieme etape, l'echantillon broye est transfere sous gaz inerte (argon) dans un tube en quartz, qui est alors chauffe a 700°C pendant 90 minutes. Des mesures de patrons de diffraction a rayons-X sur poudre furent faites pour caracteriser les changements structurels des CNS lors des etapes de synthese. Ces mesures furent prises avec un

  18. Correction partielle des Effets de la Turbulence atmosphérique en Interférométrie optique: Traitement des Données et Développement d'Optiques adaptatives pour l'Interféromètre GI2T

    NASA Astrophysics Data System (ADS)

    Vérinaud, Christophe

    2000-11-01

    Dans le domaine de la haute résolution angulaire en astronomie, les techniques de l'interférométrie optique et de l'optique adaptative sont en plein essor. La principale limitation de l'interférométrie est laturbulence atmosphérique qui entraîne des pertes de cohérence importantes, préjudiciables à la sensibilité et à la précision des mesures. L'optique adaptative appliquée à l'interférométrie va permettre un gain en sensibilité considérable. Le but de cette thèse est l'étude de l'influence de l'optique adaptative sur les mesures interférométriques et son application au Grand Interféromètre à DeuxTélescopes (GI2T) situé sur le Mont Calern dans le sud de la France. Deux problèmes principaux sont étudiés de manière théorique par des développements analytiques et des simulations numériques: le premier est le contrôle en temps réel de la variation des différences de marche optique, encore appelée piston différentiel, induite par l'optique adaptative ; le deuxième problème important est la calibration des mesures de contraste des franges dans le cas de la correction partielle. Je limite mon étude au cas d'un interféromètre multi-modes en courtes poses, mode de fonctionnement principal du GI2T également prévu sur le Very Large Telescope Interferometer installé au Cerro Paranal au Chili. Je développe une méthode de calibration des pertes de cohérence spatio-temporelles connaissant la fonction de structure des fronts d'onde corrigés. Je montre en particulier qu'il est possible d'estimer fréquence par fréquence la densité spectrale des images en courtes poses, méthode très utile pour augmenter la couverture du plan des fréquences spatiales dans l'observation d'objets étendus. La dernière partie de ce mémoire est consacrée au développements instrumentaux auxquels j'ai participé. J'ai développé un banc de qualification du système d'optique adaptative à courbure destiné au GI2T et j'ai étudié l

  19. Les pyélonephrites aigues de la femme enceinte: place du traitement médical et indications d'un drainage de la voie excrétrice supérieure (y'a-t-il des facteurs prédictifs cliniques, biologiques et radiologiques pour rendre le drainage licite?)

    PubMed Central

    El Bahri, Abdessamad; Janane, Abdellatif; Chafiki, Jaouad; Arnaud, Tayiri; Ghadouane, Mohammed; Ameur, Ahmed; Abbar, Mohammed

    2015-01-01

    Les pyélonéphrites aigues gravidiques (PNAg) sont fréquentes et peuvent avoir des conséquences maternelles et fœtales graves. Le but de notre étude était de déterminer les facteurs prédictifs cliniques, biologiques et radiologiques qui permettent de se limiter au traitement médical ou d'associer un drainage de la voie excrétrice supérieure dans la prise en charge des PNAg. Nous rapportons, de façon rétrospective une série de 26 cas dans les services d'Urologie et de Gynécologie de l'Hôpital Militaire d'Instruction Mohamed V de Rabat (Maroc) sur une période allant du 1er Janvier 2010 au 30 Aout 2012. Toutes les patientes avaient une PNAg symptomatique objectivée par l'ECBU et/ou l’échographie rénale. La fréquence de la pyélonéphrite aigue gravidique par rapport aux pyélonéphrites aigues en général a été de 27,95% avec une prédominance chez les primipares de 53,84%. Son pic de fréquence se situe à 73,08% pour les gestantes âgées de 19 à 37 ans ainsi qu'au troisième trimestre (77%) de la grossesse. La triade clinique fièvre, lombalgie, troubles mictionnels et l’échographie rénale sont les éléments importants du diagnostic. L'antibiothérapie probabiliste a été débuté d'emblée et adaptée en fonctions des résultats de l'examen cytobactériologique des urines. Sa durée est de trois à six semaines en fonction de l’évolution clinique. La protéine C réactive est un marqueur de progression de la maladie ou de l'efficacité thérapeutique. Les principaux facteurs prédictifs du drainage de la voie excrétrice supérieure sont: persistance de la symptomatologie clinique, du syndrome infectieux et des anomalies visibles à l’échographie rénale ainsi que l'altération de la fonction rénale. La montée de la sonde JJ est le principal traitement urologique. Le traitement médical repose sur l'antibiothérapie probabiliste qui sera adaptée Ultérieurement en fonction des résultats de l'antibiogramme. Les facteurs pr

  20. Etude par spectroscopie de Coulomb de points quantiques lateraux individuels et couples

    NASA Astrophysics Data System (ADS)

    Pioro-Ladriere, Michel

    Des points quantiques contenant un nombre discret et variable d'electrons sont formes dans un gaz bi-dimensionnel d'electrons a l'aide de grilles metalliques. Le transport electrique, le blocage de spin et la detection de charge sont employes comme outils spectroscopiques permettant de sonder les proprietes de ces nanostructures. Ces techniques permettent aussi de controler exactement le nombres d'electrons confines dans des points quantiques individuels et couples en utilisant un patron de grille judicieux. Une technique de refroidissement en tension est developpee afin de minimiser les effets parasites du bruit telegraphique. Ce type de bruit de charge deteriore la stabilite des nanostructures laterales par l'activation d'un minuscule courant de fuite entre les grilles et le gaz bi-dimensionnel. Un modele expliquant le role du refroidissement en tension sur le courant de fuite est presente. L'activation du courant de fuite est confirmee par detection de charge. Les effets des interactions entre les electrons pieges dans un point quantique sont ensuite etudies dans un regime ou il est possible de comparer les resulats experimentaux avec ceux obtenus par diagonalisation exacte. L'etude demontre que la phase associee au facteur de remplissage nu = 2 est instable au-dessus d'un nombre critique d'electrons. Cette instabilite est confirmee experimentalement par blocage de spin. On demontre aussi l'existence d'etats correles dans le regime des renversements de spin, associe au passage de la phase nu = 2 a nu = 1. Les etats correles sont identifies par spectroscopie en transport non lineaire. Cette caracterisation du diagramme de phase de points individuels permet de coupler deux points quantiques configures a nu = 2. Pour ce regime, la nanostructure se comporte comme un systeme a deux niveaux pouvant contenir entre un et quatre electrons de valence et ce, meme si le nombre total d'electrons est plus eleve. Les degres de liberte de charge et de spin des deux points

  1. Effet Hall et Magnetisme des Alliages Amorphes Nickel-Zirconium Fabriques Par Pulverisation

    NASA Astrophysics Data System (ADS)

    Morel, Robert

    Cette these se situe dans le cadre d'une etude des proprietes electroniques et structurales des alliages metalliques amorphes, en cours depuis quelques annees a l'Universite de Montreal. Ce programme nous a entre autres amene a caracteriser la magnetoresistivite et l'effet Hall d'alliages FeZr, CoZr et NiZr, ce qui a permis de mettre en evidence deux caracteristiques de l'effet Hall: Dans les alliages amorphes ferromagnetiques, la resistivite elevee engendre un effet Hall extraordinaire beaucoup plus important que celui enregistre dans les metaux cristallins. La polarisation des spins entrai ne une asymetrie de la diffusion qui, tant dans les phases cristalline et amorphe, est tenue responsable de cette contribution. L'autre particularite du comportement de Hall de ces systemes est le renversement de signe du coefficient de Hall ordinaire, qui passe du negatif au positif dans les echantillons plus riches en zirconium. Dans les metaux cristallins, un modele d'electrons libres predit un signe negatif a moins que la conduction ne soit dominee par les trous. Or, dans un milieu desordonne les memes concepts sont difficilement applicables et de nouvelles theories ont du etre elaborees pour expliquer ce phenomene. Jusqu'a maintenant, l'etude des alliages amorphes nickel-zirconium s'est faite surtout a partir d'echantillons fabriques par trempe sur roue. Malheureusement cette technique ne permet pas la fabrication d'alliages contenant plus de 70% de nickel, a l'exception du seul compose Ni _{90}Zr_{10 }. Pour pallier a cette lacune et etendre nos connaissance a l'ensemble de la gamme de compositions, nous avons fabrique par pulverisation cathodique des echantillons NiZr amorphes--et quelques alliages cristallins tres riches en nickel--couvrant une bonne partie de la gamme interdite par la technique de trempe sur roue. Dans un premier temps, par comparaison avec les resultats connus nous avons mis en evidence les similitudes et les differences entre les alliages obtenus par

  2. Contributions a l'etude des lidars a champs visuels multiples

    NASA Astrophysics Data System (ADS)

    Roy, Gilles

    On presente un modele, base sur la diffraction et l'optique geometrique, liant les signaux lidar a champs multiples a la densite de distribution de la taille des particules. On ecrit la relation sous forme matricielle ce qui permet d'obtenir la densite de distribution apparente de la taille des particules par inversion matricielle avec contrainte. On interprete la perturbation causee par la contribution de l'optique geometrique au signal lidar comme de la diffraction causee par une particule de diametre d'environ un micron. La densite de distribution apparente est corrigee a posteriori en calculant la contribution relative des differents ordres de diffusion a l'elargissement de la fonction de phase des particules. La validite du modele est supportee par des simulations Monte Carlo et par des resultats experimentaux obtenus sous des conditions controlees. Finalement, on applique avec succes, la technique d'inversion aux mesures lidar multichamps obtenues sur des nuages.

  3. Supports for libraries'restoration from the Great East Japan Earthquake : Challenges we address at Miyagi Prefectural Library

    NASA Astrophysics Data System (ADS)

    Kumagai, Shinichiro

    This article overviews the situations of damage and reconstruction of mainly public libraries in Miyagi Prefecture about 9 months after the Great East Japan Earthquake. Serious damage of library buildings was due not only to the tsunami or seismic sea wave but to violent shaking, the latter less reported by the media. We at the Miyagi Prefectural Library implemented reconstruction assistance for regional public libraries in both direct and indirect ways. Among them, we report in detail on the support we offered until the Minami-sanriku Town Library reopened its service. We highlight a prefectural library's role, acting between supporters and those supportees, to consider the necessity of middle organizations. We clarify what challenges we face and examine how best to provide assistance in case of large-scale disasters.

  4. Sources semiconductrices de photons uniques ou de photons jumeaux pour l'information quantique

    NASA Astrophysics Data System (ADS)

    Berger, Vincent; Gérard, Jean-Michel

    2003-07-01

    A large number of scientific proposals in recent years are based on transport and manipulation of information using single quantum objects. Although very impressive theoretical perspectives have been envisaged, experimental demonstrations are still limited due to technological difficulties with present state-of-the-art devices. This paper presents various approaches aiming at efficient single or twin photons semiconductor sources. The emergence of these devices will be an important technological breakthrough in the field of quantum information. To cite this article: V. Berger, J.-M. Gérard, C. R. Physique 4 (2003).

  5. Technoscientific French Teaching Guide = Guide pour l'enseignement du Francais technoscientifique.

    ERIC Educational Resources Information Center

    Muller, Brigitte D.

    This course guide aids university professors in doing research to develop a course in scientific and technical French. The course is intended to aid students in developing communicative skills in French in the context of science and technology. The course introduces students to the culture of France as well as to its industrial and technological…

  6. Realisation d'une installation de pneumatique rapide pour analyse des produits de de fission

    NASA Astrophysics Data System (ADS)

    Crançon, J.; Fiat, G.; Perves, J. P.; Zabe, B.; Lecolleter, L.; Prud'homme, J. J.

    1980-11-01

    For yield determinations of short-lived fission products, an automatic pneumatic rabbit system has been developed to measure without chemical separations the formed radioactive products, the γ-counting starting within one second. Irradiations are performed in a pneumatic tube system installed in an out-of-pile horizontal beam hole for thermal neutrons or near the deuterium target of a 3 MeV neutron generator. The capsule is positioned with good accuracy in front of the Ge/Li detector. The whole sequence of irradiation, transportation, and counting is controlled by automatic timers. Details of the mechanical system are given.

  7. Student Performance in Water Pouring and Balance Beam Tasks: Effect of Manipulation of Perceptual Field Factor.

    ERIC Educational Resources Information Center

    Niaz, Mansoor

    1988-01-01

    The effect of manipulation of the perceptual field factors on undergraduate student performance in proportional reasoning tasks was investigated. Evidence was found to support the hypothesis that the manipulation of the perceptual field factor can affect student performance. Reports data correlated with the Group Embedded-Figures Test. (CW)

  8. Developpement d'un catalogue de conception des chaussee pour les pays sub-sahariens

    NASA Astrophysics Data System (ADS)

    Koubikana Pambou, Claude Hugo

    Pavement surface evaluation in Sub-Saharan Africa (SSA) reveals severe, premature, and costly damages that require extensive maintenance. This is due to the limitations of tools used for pavement structural design as well as and the lack of the available calibration for the materials used. It is necessary to search for solutions for these failures and: * feed the discussion on durable roads for SSA area to meet the expectations of the trans- African highway projects of the new partnership for Africa (NEPAD); * provide simple and effective tools for pavement design and promote low cost for maintenance of road infrastructures; * provide users with functional and safety and durable road system. This catalogue, object and result of this work, was developed through a new tool for structural design (OCS-Chaussee), computed using Microsoft Excel worksheet. It uses iteration through empirical mechanics (ME) methods, applied to multilayer linear analysis using Odemark - Boussinesq method as a theoretical and conceptual basis for design pavement. The verification of obtained results was done with viscoelasticity assumption according Quijano's data (2010) and the pavement analysis software WINJULEA developed by US Army Corps of Engineers (USACE) and with the backcalculation's data from Varik and al. (2002) and local's data from South-African. The lifetime of each proposed roadway was estimated by using Asphalt Institute's transfer function and the Miner's law. It's hope that thoughtful use of this catalogue and the OCS- Chaussee will help advance reasonable road engineering solutions approaches, and training and make profitable budgets allocated to the construction and to road rehabilitation in Sub-Saharan Africa.

  9. Guide to International Studies at Canadian Universities = Guide pour les etudes internationales aux universites Canadiennes.

    ERIC Educational Resources Information Center

    Johnston, Pari, Ed.

    Included in this guide is a list of 65 Canadian universities and colleges offering programs in international and Native studies. Programs encompass area studies, international development, international relations, international business, international law, international agriculture, and international and comparative education. Also included are…

  10. Guidelines on Non-Sexist Language = Pour un Langage Non Sexiste.

    ERIC Educational Resources Information Center

    United Nations Educational, Scientific, and Cultural Organization, Paris (France).

    This booklet was developed in response to a UNESCO resolution calling for the avoidance of gender-specific language. The booklet is intended to help authors and editors avoid writing in a manner that reinforces questionable attitudes and assumptions about people and sex roles. The bilingual booklet discusses problems of ambiguity (cases where it…

  11. Synthese de nanoparticules plasmoniques par laser femtoseconde en milieu liquide pour des applications biomedicales

    NASA Astrophysics Data System (ADS)

    Besner, Sebastien

    The femtosecond laser synthesis of plasmonic nanoparticles (Au, Ag, Cu, AuAg, AuCu) is described. The approach relies on the fs laser ablation of a target immersed in a liquid, followed by the laser-induced fragmentation and growth of nanoparticles in solution. This two-step methodology significantly enhances the production rate, the reproducibility and the size control of nanoparticles in comparison to the direct laser ablation based technique. For gold, the laser-induced growth of nanometric seeds initially formed by laser ablation in the presence of a stabilizing agent allows the synthesis of functionalized nanoparticles with sizes ranging from 3-76 nm and coefficients of variation (COV) varying between 15-30%. In comparison to the direct laser ablation, the size control is much simpler, as it uniquely depends on the gold to stabilizing agent molecular concentration ratio. The approach has been described for dextran and polyethylene glycol (PEG), but can be extended to all stabilizing agents and open new avenues in the formation of various novel bioconjugates. The fs laser ablation and fragmentation also allow the synthesis of stable and low dispersed Au nanoparticles in pure water. These nanoparticles are unique for sensing applications with high sensitivity based on surface enhanced Raman scattering (SERS), since they greatly reduce the noise associated with surface contaminants and byproducts found in solution. The formation of various nanospheres with predetermined size, shape and composition (AuxAg(1-x), AuxCu(1-x) ) is also reported by the use of a fs irradiation of a mixture of two pure metallic ix colloidal solutions in a very simple chemical environment, e.g. water and a stabilizing agent. From a chemical point of view, oxidation of silver nanoparticles is significantly reduced by the incorporation of a small amount of gold and is completely inhibited for a gold atomic fraction larger than 0.4-0.5. The bifunctional nature related to the partial oxidation of the gold nanoparticle surface allows a wide range of stabilization mechanisms. The stabilization by hydrophobic-hydrophobic interaction, by hydrogen bonds formation, by chemisorptions of thiols and by electrostatic interactions is evaluated. A new class of stabilizing agents, biopolymers, is also introduced. The addition of these polymers during the laser ablation, fragmentation or growth process enables in situ surface functionalization and efficient size control. The biocompatibility of these stabilizers also allows the direct introduction of nanoparticles in in vitro or in vivo applications without further purification. Significant efforts have also been undertaken to check the possible degradation of the polymers used during the laser process. These studies demonstrate a low degradation via an oxidation mechanism, involving the production of free radicals and oxidizing species by dissociation of water molecules during the laser process. Finally, the mechanisms of laser ablation in liquids and a growth model for the nanoparticles are proposed based on experimental results from literature and this thesis. The formation of nanoparticles is described by three distinct phases. First, a fast nucleation and condensation of the ejected species occur in the plasma and are caused by extremely high cooling rates, which lead to a strong supersaturation. This short nucleation and condensation phase is followed by a marked growth of the liquid (and still hot) nuclei by coalescence. After solidification, these nuclei should have sizes below 2 nm and be mostly condensed at the liquid-vapor interface of the growing cavitation bubble. Without the presence of stabilizing agent, growth by atomic diffusion and coalescence continue inside the cavitation bubble and should be accelerated following its collapse. Nanoparticles and unreacted monomers are then propelled out of the ablation zone by the secondary shock wave associated with the collapse of the cavitation bubble and further grow in solution. This cycle is repeated for each laser pulse and interaction between species in solution and the ablated species and/or the incident radiation is expected to occur based on the geometry of the ablation cell. (Abstract shortened by UMI.)

  12. Microscopie non-lineaire pour l'imagerie des cordes vocales

    NASA Astrophysics Data System (ADS)

    Deterre, Romain

    The vocal cords are two folds of epithelial tissues located in the larynx and are involved in production of the human voice. Despite their apparent simplicity, their internal structure is complex. Each fold can be divided into several layers with different mechanical properties. The gold standard for studying their structure - histology - has the inconvenience of being very invasive. Non-linear microscopy is an optical imaging technique which allows images to be taken in depth within samples in a non invasive manner. It also offers intrinsic contrasts, allowing the identification of certain fibrous proteins - elastin and collagen - which are responsible for the mechanical properties of epithelious tissues. The main goal of this research project was to assess nonlinear microscopy's performances for vocal fold imaging. The study has been broken down in two separate tasks. The first one was to evaluate the nonlinear modalities contrast against histology. For that purpose, we chose to first take images of thin samples and compare them to the corresponding histological slides. The second task was to make tests to transcribe the results obtained to in vivo imaging. A custom-built nonlinear imaging system was used for these experiments. It was developed to allow acquisition of wide-field images. A C++ based software was developped to control the microscope and allow treatment and visualization of the images. After being built, the system was further tested to check its performances in comparison with the theoretical limit as described in the literature. Thin slices of vocal folds were obtained from the team of Pr Christopher J. Hartnick from Massachusetts Eye and Ear Infirmary, Harvard Medical School. Specialists from his team analysed the histological samples to extract structural data from the vocal folds. A good correlation was measured between histological and nonlinear data. A first step in evaluating the possibility for translating these results towards in vivo imaging was performed during this project. A swine's larynx was obtained, and vocal folds were extracted for imaging purposes. This experiment showed that it is indeed possible to localize various macrostructures of the tissues with nonlinear microscopy.

  13. Pour Nos Petits Manitobains (For Our Little Manitobans): Exposure Package for Grade 3. Conversational French Program.

    ERIC Educational Resources Information Center

    Saiko, Evelyne, Ed.; Sotiriadis, Caterina, Ed.

    This primary "exposure package" is intended for the use of grade 3 teachers of English-speaking children who received French-as-a-Second-Language instruction in a non-immersion context. The aims of this French program are to: (1) expose the child to the French language, (2) foster a positive attitude toward French, and (3) develop awareness of…

  14. Capteurs monopodes pour mesures accélérométriques

    NASA Astrophysics Data System (ADS)

    Delaite, R.; Valentin, J.-P.

    1993-08-01

    A new design for accelerometric measurements sensors is described. It uses a plate vibrating in thickness shear mode, maintained by the means of a single holder located at the crystal edge. This mounting does cancel the mechanical and thermal stresses which generally modify the sensor output signal. So the ratio signal/noise of a thickness shear accelerometer is improved and the intrinsic sensitivity is multiplied by a factor 40, by comparison with the sensitivity of a thickness shear plate bonded by the means of two opposite holders. Un nouveau dispositif destiné aux mesures d'accélération est présenté. Il met en œuvre une lame vibrant en cisaillement d'épaisseur, fixée à sa structure de maintien par l'intermédiaire d'une unique liaison. Ce montage permet d'éliminer les contraintes mécaniques et thermiques qui perturbent habituellement le signal de mesure, et qui sont liées soit au montage des éléments du capteur, soit aux variations rapides de température qui interviennent lors de la mise en fonctionnement du capteur. Le rapport signal/bruit d'un accéléromètre à lame vibrant en cisaillement d'épaisseur s'en trouve amélioré et la sensibilité à l'accélération est multipliée par un facteur 40, comparée à celle d'un capteur qui serait constitué d'une lame vibrant en cisaillement d'épaisseur, fixée par deux liaisons diamétralement opposées.

  15. ANALYTICAL RESULTS OF MOX COLEMANITE CONCRETE SAMPLE POURED JULY 25, 2012 - CURED 28 DAYS

    SciTech Connect

    Cozzi, A. D.; Best, D. R.; Reigel, M. M.

    2012-09-18

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use Colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. Samples 8.1.2, 8.2.2, 8.3.2, and 8.4.2 were received on 8/1/2012 and analyzed after curing for 28 days. The average total density measured by the ASTM method C 642 was 2.09 g/cm{sup 3}, within the lower bound of 1.88 g/cm{sup 3}. The average partial hydrogen density was 7.48E-02 g/cm{sup 3} as measured using method ASTM E 1311 and met the lower bound of 6.04E-02 g/cm{sup 3}. The average measured partial boron density was 1.71E-01 g/cm{sup 3} which met the lower bound of 1.65E-01 g/cm{sup 3} measured by the ASTM C 1301 method.

  16. Un environnement d'apprentissage technologique pour la comprehension du concept de mesure en sciences experimentales

    NASA Astrophysics Data System (ADS)

    Fournier, Frederic

    The learning environment created during this research/development constitutes a micro-laboratory allowing students at the secondary and collegial level to build a measurement system. This approach based on the concrete manufacture of measuring instruments showed that the student did not only acquire knowledge, but he developed a know-how in the technology of measuring systems and also a know-how and knowledge in experimental sciences. In conceptualizing and building his own measurement system, in a computer-assisted experimental environmental, the student performs a scientific investigation in which he must induce a causal relationship between the different variables at stake. He must then isolate this relationship by building a scheme for the control of the variables and model it in an algebraic and graphic form. We believe that this approach will allow the students to better understand the physical phenomena they will be measuring. The prototypes and software used to build these measuring instruments were evaluated and redesigned at the functional and didactic levels in order to offer a learning environment that respects in every way the competence approach and the integration between science and technology.

  17. Microstructure et proprietes electriques de l'oxyde de vanadium pour les microbolometres

    NASA Astrophysics Data System (ADS)

    Cadieux, Catherine

    Recent technological breakthroughs in the fabrication of microsystems will soon allow the mass production of infrared cameras. Subsequent price cut will open many new sectors of application. Because of its electrical properties, sputtered vanadium oxide has already been identified as the leading candidate for the active material of microbolometers. However, the large number of different crystallographic phases, as well as the instable nature of reactive sputtering, haveled to numerous contradictions in the existing literature. With the objective of understanding the impact of the deposition parameters on the microstructure, and of the microstructure on the electrical properties, vanadium oxide thin films have been deposited and characterised. In order to study their impact on the microstructure, oxidation state and pulse at the target, substrate bias and temperature, power, and film thickness were varied independently. The resulting thin films have been characterised by X-ray diffraction, Rutherford backscattering spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, spectral reflectometry, optical interferometry as well as four-point probe and Van Der Pauw electrical measurements. Because of the instability of the poisoning regime, the actual system configuration forbids the deposition of phases with composition between V 3O7 and V7O3. Films deposited under a strong bias in the poisoned regime having the best properties, their growth mechanism has been thoroughly investigated. Under those conditions, the bombarding ions are energetic enough to modify the structure of the underlying thin film without resputtering it. A complex relation linking temperature, thickness and microstructure is observed. As the thickness is increased, the structure changes from amorphous, to almost monocristalline V2O5 (001) oriented, to polycristalline. For higher deposition power, the polycristalline section contains V3O7 in addition to the multiple orientations of V2O5. Those germinations which have already been observed but not explained in literature can be attributed to the accumulation of germination centers, a stress buildup for the crystalline sections, and a substrate heating caused by the ions bombardment. This last effect is also suggested to be the cause of the amorphous phase crystallisation for the films with longer deposition times. Films deposited at different temperatures show the same microstructure transitions. Two different behavior regimes can be proposed as function of the adatoms' energy. For low temperature, increasing the adatom energy increases the diffusion which promotes the formation of the lowest surface energy stoichiometry and orientation, V2O 5(001). At higher temperature, energy is sufficient to form more energetically expensive orientation and phases. Resistivity is strongly dependant on grain boundaries density as seen by its relationship with lateral grain size. The thin film resistivity is also increased with the number of different crystallographic orientation present in it. To circumvent the high sheet resistance of the deposited single layer films, a multilayer stacking of alternating oxides and metal layers has been deposited. This approach has permitted this project's industrial collaborator to obtain a sheet resistance of 250 kO/□and a TCR of -1.59 %/K. The microstructure of the multilayer is however very heterogeneous. Not only can the metal layers be identified, it is also possible to observe the amorphous to polycrystalline transition described higher for every oxide layer. This multilayer, as well as the best single layer film produced have been annealed for 2 hours at 400°C in high vacuum. The annealed multilayer doesn't show any diffraction peaks, has very low resistance, and an almost null TCR generally attributed to metallic compounds We suggest that the diffusion of the vanadium layers into the stack created a polycrystalline structure with grains that are too small to be seen by XRD. The single layer under

  18. Primordial nucleosynthesis in the Rh = ct cosmology: pouring cold water on the simmering Universe

    NASA Astrophysics Data System (ADS)

    Lewis, Geraint F.; Barnes, Luke A.; Kaushik, Rajesh

    2016-07-01

    Primordial nucleosynthesis is rightly hailed as one of the great successes of the standard cosmological model. Here we consider the initial forging of elements in the recently proposed Rh = ct universe, a cosmology that demands linear evolution of the scale factor. Such a universe cools extremely slowly compared to standard cosmologies, considerably depleting the available neutrons during nucleosynthesis; this has significant implications for the resultant primordial abundances of elements, predicting a minuscule quantity of helium which is profoundly at odds with observations. The production of helium can be enhanced in such a `simmering universe' by boosting the baryon to photon ratio, although more than an order of magnitude increase is required to bring the helium mass fraction into accordance with observations. However, in this scenario, the prolonged period of nucleosynthesis results of the efficient cooking of lighter into heavier elements, impacting the resultant abundances of all elements so that, other than hydrogen and helium, there are virtually no light elements present in the universe. Without the addition of substantial new physics in the early universe, it is difficult to see how the Rh = ct universe can be considered a viable cosmological model.

  19. Primordial nucleosynthesis in the Rh=ct cosmology: pouring cold water on the simmering Universe

    NASA Astrophysics Data System (ADS)

    Lewis, Geraint F.; Barnes, Luke A.; Kaushik, Rajesh

    2016-07-01

    Primordial nucleosynthesis is rightly hailed as one of the great successes of the standard cosmological model. Here we consider the initial forging of elements in the recently proposed Rh = ct universe, a cosmology that demands linear evolution of the scale factor. Such a universe cools extremely slowly compared to standard cosmologies, considerably depleting the available neutrons during nucleosynthesis; this has significant implications for the resultant primordial abundances of elements, predicting a minuscule quantity of helium which is profoundly at odds with observations. The production of helium can be enhanced in such a "simmering universe" by boosting the baryon to photon ratio, although more than an order of magnitude increase is required to bring the helium mass fraction into accordance with observations. However, in this scenario, the prolonged period of nucleosynthesis results of the efficient cooking of lighter into heavier elements, impacting the resultant abundances of all elements so that, other than hydrogen and helium, there are virtually no light elements present in the universe. Without the addition of substantial new physics in the early universe, it is difficult to see how the Rh = ct universe can be considered a viable cosmological model.

  20. Tomographie par coherence optique pour le guidage de chirurgies minimalement invasives du rachis

    NASA Astrophysics Data System (ADS)

    Beaudette, Kathy

    Adolescent idiopathic scoliosis is a complex 3D deformity of the spine which requires surgical intervention in severe cases of the condition. The existing corrective procedure of scoliosis is very invasive; it involves a long incision and a large instrumentation, in addition to the fusion of a section of the spine. To improve postoperative conditions and to preserve patients' spinal flexibility, novel fusionless surgical approaches involving growth modulation are under investigation. With this objective in mind, a multidisciplinary team from École Polytechnique of Montreal and Sainte-Justine University Hospital Research Center is developing a surgical technique based on the insertion of micro-staples between vertebral growth plates and corresponding intervertebral disks. Each micro-staple passively modulates the vertebral growth on the convex side of the scoliotic curvature. This modulation modifies vertebral geometry which, for scoliotic patients, presents a wedging deformity. The modulation induced by these devices could lead to the correction of the curvature of the spine. This innovative procedure would preserve the flexibility of the spine as well as the health of intervertebral disks, in addition to being compatible with minimally invasive approaches. However, to be efficient, the micro-staples must be placed at the junction between the growth plate and the disk with a sub-millimeter precision. An intraoperative guiding system is therefore required to ensure the success of the intervention. Optical coherence tomography (OCT) is a promising candidate for this application. OCT is based on low-coherence interferometry and provides cross-sectional images with a resolution about 10 μm for a depth of 2 to 3 mm. This technique allows for the real-time acquisition of images and is compatible with endoscopy, thereby showing a potential for the intraoperative guidance of minimally invasive surgeries (MIS) of the spine. The main objective of this master's project is therefore to evaluate the possibility of using OCT to localize as well as identify spinal structures (such as growth plates, osseous tissue, intervertebral disks and connective tissue) and to guide the insertion of micro-staples. To attain this objective, an OCT handheld probe was designed and developed according to the surgical constraints of MIS performed by thoracoscopy (through the thorax). This probe has an external diameter of 17 mm and is 30 cm long. Coupled with a fibered interferometer, the axial and lateral resolutions of the probe are of 16 and 27 μm respectively. The OCT probe was used in vivo during an open surgery on a porcine model. Different tissues within the operative window (lung, muscles, osseous tissues and intervertebral disk) were imaged during the procedure. These preliminary in vivo tests demonstrated that the probe is capable of identifying different types of tissue with a good sensitivity and an adequate penetration depth. These results also showed that a visual inspection of the in vivo OCT images alone is not sufficient to localize the growth plates on the vertebrae. An ex vivo study using porcine vertebrae was therefore performed to identify quantitative markers in order to facilitate the interpretation of in vivo OCT images. OCT images were initially compared to corresponding histological sections. The ensuing results showed that the connective tissue layer presents a band pattern due to the birefringence properties of the collagen-rich tissue. The intervertebral disk was also shown to have a characteristic lamellar structure on OCT images. Lastly, within growth plate and osseous tissue locations, the OCT signal decay is monotonic, but with different attenuation coefficients (different slopes). Relative attenuation coefficients were therefore measured for each tissue (growth plate, osseous tissue, connective tissue and intervertebral disk) on several specimens and were compared. These results showed that growth plates present an average relative attenuation coefficient statistically different from the other tissues. An automatic growth plate segmentation algorithm was then developed and tested. The algorithm was applied to images from an ex vivo specimen of a porcine vertebra and successfully identified most of the growth plate (> 75%) amidst the osseous tissue of the vertebral body and the intervertebral disk. This master's project shows that OCT presents contrast, resolution and penetration depth that are sufficient for the identification of musculoskeletal structures of the spine. It is thus reasonable to believe that, ultimately, OCT could be used for the intraoperative guiding of the insertion of micro-staples during corrective surgeries of scoliosis.

  1. Methods of Fabricating a Layer of Metallic Glass-Based Material Using Immersion and Pouring Techniques

    NASA Technical Reports Server (NTRS)

    Hofmann, Douglas (Inventor)

    2015-01-01

    Systems and methods in accordance with embodiments of the invention implement layers of metallic glass-based materials. In one embodiment, a method of fabricating a layer of metallic glass includes: applying a coating layer of liquid phase metallic glass to an object, the coating layer being applied in a sufficient quantity such that the surface tension of the liquid phase metallic glass causes the coating layer to have a smooth surface; where the metallic glass has a critical cooling rate less than 1000 K/s; and cooling the coating layer of liquid phase metallic glass to form a layer of solid phase metallic glass.

  2. Synthese et caracterisation d'heterostructures de (In)GaAsN pour l'optoelectronique

    NASA Astrophysics Data System (ADS)

    Beaudry, Jean-Nicolas

    2007-12-01

    This doctoral project proposes to study the incorporation of nitrogen to GaAs epitaxial layers grown on GaAs(001) substrates, a system that allows for systematically isolating the effect of nitrogen from that of indium. In this thesis we report on the results of a work where the focus was brought on (i) the growth kinetics of GaAs1-xNx during the metal-organic vapour phase epitaxy growth (OMVPE) (ii) the analysis of the physical and structural properties of GaAs1-xNx/GaAs heterostructures and (iii) the characterization of the nitrogen incorporation sites in the GaAs crystal lattice. Moreover, we present the results of exploratory studies aiming at the production of GaAs1-xN x/GaAs multilayers and to the growth of InyGa1-yAs1-x Nx quaternary alloys. These latter studies address issues that are closer to technological applications since they focus on process details pertaining to the fabrication of devices. Trimethylindum (TMIn), trimethylgallium (TMGa), tertiarybutylarsine (TBAs) and dimethylhydrazine (DMHy) were used as organometallic sources, a quite original combination since not widely encountered in the epitaxial growth field. TBAs has the great advantage of being far less dangerous than arsine in OMVPE processes, the latter being highly toxic and more prone to causing leaks on a large scale. Regarding the diversity of the growth parameters, the GaAs1-xNx/GaAs samples grown for this project definitely constitute one of the largest bank of its kind. The systematic monitoring of both the growth rate and the composition of these materials under varying growth conditions has, as a consequence, generated an impressive quantity of experimental data. In addition to the DMHy flow rate, the investigated parameters include, among others, the reactor pressure, the TMGa flow rate, the substrate temperature (from 500 to 650°C), and the V/III ratio. Not only have those results allowed to highlight important behaviors of the chemical species involved in surface reactions, but they also allowed for pointing out an important lack of knowledge on the decomposition pathways of the organometallics sources. Nitrogen incorporation in GaAs being very inefficient, exceptionally high flow rates of DMHy are required, which sometimes lead to V/III ratios greater than 500. Depending on the growth temperature, this excess of DMHy molecules on the growth surface affects the growth rate and the incorporation efficiency in a complex way. Moreover, the sensitivity of x with respect to the gas phase composition translates into a laterally non-uniform incorporation of N during the growth of epilayers with high nitrogen content. For low temperatures and extremely large flow rates of DMHy, this precursor occupies most of the adsorption sites on the growth surface, thus leading to drastic reduction of the growth rate accompanied by a very large N incorporation (x > 0,1). High resolution X-ray diffraction (HR-XRD) and heavy ion Rutherford backscattering spectroscopy (HIRBS) analyses suggest that the epilayers deposited under such conditions undergo a phase separation and exhibit an important non-stoechiometry, probably indicative of an amorphous matrix. Our results also allowed us to identify and explain a nonlinear variation of the GaAs1-xNx lattice parameter a as a function of its composition x. (Abstract shortened by UMI.)

  3. Compatibilite deformationnelle des betons autoplacants pour des utilisations dans les reparations des infrastructures routieres

    NASA Astrophysics Data System (ADS)

    Ghezal, Aicha Fadela

    Concrete structures repairs in Civil Engineering by using a thin bonded overlay is common practice. However the repaired structures are often victim of premature deterioration of the new repair material due to the appearance of restrained shrinkage cracks. In this context, the main objective of this thesis is to identify, through the experimental program called Phase I the principal parameters that significantly influence the creep potential of the evaluated mixtures. Once these parameters identified, the experimental entitled Phase II is conducted under conditions simulating repairs, and emphasis was placed on restrained shrinkage using instrumented ring test. Article 1 summarized the laboratory investigation undertaken to evaluate the potential of flexural creep behavior of several SCC. The results show clearly that the flexural creep potential of SCC varies widely depending on the nature of HRWR in use. In general, the use of naphthalene sulfonate leads to higher creep by comparison to polycarboxylate. It has been shown also that even when belonging to the same A.S.T.M. classification (polycarboxylic family) the magnitude of flexural creep varies also widely depending on the properties of polycarboxylic chemicals admixture. Based on the identified parameters in phase I, namely PNS superplasticizers type and PC2, with two ternary blended cements with fly ash (BTCFA) and slag (BTCS), the second experimental program was undertaken and summarized in articles 2 and 3. As presented in article 2, the results indicate that optimized SCCs produced with blended ternary cement with fly ash (BTCFA) developed at earlier age lower compressive and splitting-tensile strengths than the corresponding SCCs with blended cement with slag (BTCS). Test results also indicated that the drying shrinkage of SCCs based on BTCFA is higher than the corresponding SCCs proportioned with BTCS and attributed in part to higher total pores volume measured at 120 days on SCC BTCFA. The restrained shrinkage of SCC summarized in article 3 show that the resistance of SCC to shrinkage cracks was quite different depending on the nature of HRWR and the binder type in use. The cracking age increases in mixtures proportioned with PC-HRWR comparatively to PNS-HRWR. The SCC mixtures based on blended ternary cement containing Class F fly ash show shorter cracking age than the corresponding SCCs proportioned with ternary blended cement containing slag. Moreover, a data analysis of current research shows that the ratio of tensile strength to free shrinkage and modulus of elasticity, referred as index of dimensional compatibility, is a promising assessment of cracking resistant performance. In this way, only the free shrinkage test (ASTM C157) and basic mechanical properties are required to assess cracking of candidate concrete mixture designs.

  4. [Role of the French Research Institute for Overseas Development (Institut de Recherche pour le Developpement, IRD)].

    PubMed

    Girard, Jean-François

    2008-02-01

    IRD is a French public scientific and technological institution, jointly overseen by the Ministries of Research and Overseas Cooperation. It has three main vocations: research, evaluation and training It meets these objectives by conducting scientific programs, centered around the relationship between humans and their environment in poor countries, in order to contribute to sustainable development. IRD has a budget of 218,9 millions euros. It employs 2 235 staff including 830 researchers, 1 021 engineers and technicians, and local personnel. Forty-two percent of IRD staff are employed overseas, many technicians originate from poor countries, and IRD research programs involve researchers from many countries. IRD is engaged in several European and international scientific programs, and plays a coordinating role for research institutions and universities working towards third-world development. PMID:18819682

  5. Une Nouvelle Place pour le francais au Senegal? (A New Place for French in Senegal?)

    ERIC Educational Resources Information Center

    Ka, Omar

    1993-01-01

    A discussion of the role of the French language in Senegal first chronicles language and education policy from the colonial period until 1980, then cites research indicating that French is infrequently used for personal purposes. Recent initiatives to strengthen its status and usage, and obstacles to their success, are outlined. (MSE)

  6. L’acyclovir pour la gingivostomatite herpétique chez l’enfant

    PubMed Central

    Goldman, Ran D.

    2016-01-01

    Résumé Question Je vois chaque année des enfants d’âge préscolaire souffrant de gingivostomatite. Ce problème semble causer une charge de morbidité assez considérable. Parce que la maladie est attribuable au virus herpès simplex de type 1, faudrait-il prescrire une thérapie antiherpétique à l’acyclovir par voie orale? Réponse Bien que la plupart des enfants souffrant de gingivostomatite soient asymptomatiques, certains auront des douleurs et un inconfort importants, et sont à risque de déshydratation. Il n’existe pas d’études d’envergure bien conçues permettant de déterminer clairement la thérapie appropriée chez tous les enfants. Selon la seule étude randomisée, le traitement ne doit être administré que dans les 72 premières heures suivant l’apparition des symptômes si des douleurs substantielles ou une déshydratation sont documentées.

  7. Le développement durable, nouvel enjeu pour l'humanisme

    NASA Astrophysics Data System (ADS)

    Vauge, Christian

    2014-06-01

    Sustainable development, a new challenge for humanism - Humankind has always turned to humanism as a way of supporting its individual and collective behaviour. First it invoked natural entities endowed with various virtues, which, in monotheistic religions, were concentrated in a single deity whose omniscience precluded the pursuit of knowledge until the European Renaissance. Emboldened by many discoveries, the Enlightenment based humanism on humankind itself. The flimsy logic of this hypothesis prompted a need to return to an external reference rehabilitating nature in its original state. Earth, revealed by space exploration as the scope within which human existence is bounded, is the obvious choice. But greedy industrial civilization will have used up its resources or poisoned them in a few centuries. To escape this fate, humankind must imagine a new humanism to regain its ecological "niche" without sacrificing its indefinite development. Conceptual and technical ways forward exist but should be taught worldwide. Paradoxically, less advanced societies could be the first to benefit from the new humanism and the status of homo oecologicus.

  8. Methodes de decomposition pour la planification a moyen terme de la production hydroelectrique sous incertitude

    NASA Astrophysics Data System (ADS)

    Carpentier, Pierre-Luc

    In this thesis, we consider the midterm production planning problem (MTPP) of hydroelectricity generation under uncertainty. The aim of this problem is to manage a set of interconnected hydroelectric reservoirs over several months. We are particularly interested in high dimensional reservoir systems that are operated by large hydroelectricity producers such as Hydro-Quebec. The aim of this thesis is to develop and evaluate different decomposition methods for solving the MTPP under uncertainty. This thesis is divided in three articles. The first article demonstrates the applicability of the progressive hedging algorithm (PHA), a scenario decomposition method, for managing hydroelectric reservoirs with multiannual storage capacity under highly variable operating conditions in Canada. The PHA is a classical stochastic optimization method designed to solve general multistage stochastic programs defined on a scenario tree. This method works by applying an augmented Lagrangian relaxation on non-anticipativity constraints (NACs) of the stochastic program. At each iteration of the PHA, a sequence of subproblems must be solved. Each subproblem corresponds to a deterministic version of the original stochastic program for a particular scenario in the scenario tree. Linear and a quadratic terms must be included in subproblem's objective functions to penalize any violation of NACs. An important limitation of the PHA is due to the fact that the number of subproblems to be solved and the number of penalty terms increase exponentially with the branching level in the tree. This phenomenon can make the application of the PHA particularly difficult when the scenario tree covers several tens of time periods. Another important limitation of the PHA is caused by the fact that the difficulty level of NACs generally increases as the variability of scenarios increases. Consequently, applying the PHA becomes particularly challenging in hydroclimatic regions that are characterized by a high level of seasonal and interannual variability. These two types of limitations can slow down the algorithm's convergence rate and increase the running time per iteration. In this study, we apply the PHA on Hydro-Quebec's power system over a 92-week planning horizon. Hydrologic uncertainty is represented by a scenario tree containing 6 branching stages and 1,635 nodes. The PHA is especially well-suited for this particular application given that the company already possess a deterministic optimization model to solve the MTPP. The second article presents a new approach which enhances the performance of the PHA for solving general Mstochastic programs. The proposed method works by applying a multiscenario decomposition scheme on the stochastic program. Our heuristic method aims at constructing an optimal partition of the scenario set by minimizing the number of NACs on which an augmented Lagrangean relaxation must be applied. Each subproblem is a stochastic program defined on a group of scenarios. NACs linking scenarios sharing a common group are represented implicitly in subproblems by using a group-node system index instead of the traditional scenario-time index system. Only the NACs that link the different scenario groups are represented explicitly and relaxed. The proposed method is evaluated numerically on an hydroelectric reservoir management problem in Quebec. The results of this experiment show that our method has several advantages. Firstly, it allows to reduce the running time per iteration of the PHA by reducing the number of penalty terms that are included in the objective function and by reducing the amount of duplicated constraints and variables. In turn, this allows to reduce the running time per iteration of the algorithm. Secondly, it allows to increase the algorithm's convergence rate by reducing the variability of intermediary solutions at duplicated tree nodes. Thirdly, our approach reduces the amount of random-access memory (RAM) required for storing Lagrange multipliers associated with relaxed NACs. The third article presents an extension of the L-Shaped method designed specifically for managing hydroelectric reservoir systems with a high storage capacity. The method proposed in this paper enables to consider a higher branching level than conventional decomposition method enables. To achieve this, we assume that the stochastic process driving random parameters has a memory loss at time period t = tau. Because of this assumption, the scenario tree possess a special symmetrical structure at the second stage (t > tau). We exploit this feature using a two-stage Benders decomposition method. Each decomposition stage covers several consecutive time periods. The proposed method works by constructing a convex and piecewise linear recourse function that represents the expected cost at the second stage in the master problem. The subproblem and the master problem are stochastic program defined on scenario subtrees and can be solved using a conventional decomposition method or directly. We test the proposed method on an hydroelectric power system in Quebec over a 104-week planning horizon. (Abstract shortened by UMI.).

  9. Partners in Quality: Relationships, 2 = Partenaires pour la qualite: Relations, 2.

    ERIC Educational Resources Information Center

    Kaiser, Barbara; Rasminsky, Judy Sklar

    Partners in Quality is a research and development project sponsored by the Canadian Child Care Federation and its affiliates to explore how child care providers, parents, and other partners can work together to support and improve quality in child care. This booklet, in both English and French, is the second in a series to support child care…

  10. Microparticules magnetiques therapeutiques pour la chimio-embolisation ciblee du foie

    NASA Astrophysics Data System (ADS)

    Pouponneau, Pierre

    The proposed project introduces a therapeutic vector for the liver tumor treatment based on a new magnetic targeting strategy. The hypothesis of this thesis is that it is possible to design a therapeutic vector compatible with the constraints of liver chemoembolization and MRN in the hepatic artery to target the right/left lobe of the liver. This vector, referred to as therapeutic magnetic microcarriers (TMMC) is loaded with an antitumor drug and magnetic nanoparticles. A design study, based on a mathematical modeling of microparticle steering and a literature review on the chemoembolization, was done to optimize TMMC properties (diameter, Ms, nanoparticle choice and loading). Iron-cobalt (FeCo) nanoparticles were synthesized and annealed under inert conditions to improve their magnetic properties. These ferromagnetic nanoparticles possessed a mean diameter of 200 nm, measured by transmission electronic microscopy, and an Ms of 205 emu g-1, determined with a vibrating sample magnetometer. These nanoparticles, by their high Ms, allowed reducing by half the magnetic material loading in TMMC compared with the encapsulation of iron oxide nanoparticles. The nanoparticles coated with 10-nm graphite shell were protected from oxidation and thus they maintained their excellent magnetic properties. The design study was experimentally confirmed by the encapsulation of FeCo nanoparticles into poly(lactic-co-glycolic acid (PLGA) biodegradable microparticles. The latter were steered in vitro in a phantom mimicking the hepatic artery and its right/left bifurcation. The steering efficiency was determined by steering video analysis and the iron and cobalt ion concentrations were assayed by atomic absorption spectrometry in each bifurcation. FeCo nanoparticles were then co-encapsulated with doxorubicin (DOX) into PLGA microparticles. DOX is an antitumor drug widely used for HCC treatments. TMMC possessed a mean diameter of 52 mum, an Ms of 72 emu g-1 and they were loaded with 37% (w/w) of nanoparticles and 3% (w/w) of DOX. In vitro, after 3 days of elution in phosphate buffered saline solution, 54% of the DOX encapsulated remained in the TMMC. The elution was characterized by a fast release phase during one hour and then a slow kinetics. The steering was evaluated in vitro in a phantom mimicking the hepatic artery under physiological and interventional radiology conditions (injection by catheter, variation of distance between the catheter and the bifurcation from 30 to 20 mm, magnetic gradient from 200 to 400 mT m -1, flow velocity from 7.5 to 12 cm s-1). Steering efficiency was defined as the reduction of the TMMC (or drug) dose in the untargeted area in the presence of magnetic steering versus the negative control (no steering). The steering efficiency increased when the magnetic gradient increased. The efficiency decreased when the flow velocity increased and the catheter was closer to the bifurcation. The efficiency decreased with microparticles with lower steering properties (diameter of 30 mum and Ms of 49 emu g-1). This result confirmed that the TMMC properties were specific to the vascular network being targeted. In the optimal conditions, the steering efficiency reached 70%. The steering of TMMC was measured in vivo. An interventional radiology protocol compatible with MRN was developed to place the catheters, to reduce the hepatic artery blood velocity during the steering and to determine the MRI sequence parameters. TMMC induced signal loss on T2*-weighted magnetic resonance images because of their high Ms which allowed their easy localization in the tissues. The embolization of the hepatic artery branches by TMMC was confirmed by histological analysis. The sustained release of DOX was verified by measuring its plasmatic concentration. TMMC distribution in the tissues was determined by the histological analysis and DOX and cobalt concentration measurements. A significant difference in the TMMC distribution in the liver lobes between the group with MRN and the control group was obtained. The MRN allowed reducing the microparticle concentration in the untargeted area. In the optimal conditions, the steering efficiency reached 50%. The parameters influencing the steering efficiency in vitro were confirmed during in vivo tests. (Abstract shortened by UMI.)

  11. Recepteur SBAS-GNSS logiciel pour des applications temps-reel

    NASA Astrophysics Data System (ADS)

    Guay, Jean-Christophe

    Satellite positioning is at a critical point of its existence. The modernization of Global Positioning System (GPS) and GLObal Navigation Satellite System (GLONASS) and the arrival of European and Chinese systems will allow a multitude of new applications. This combination of global positioning system satellites and the GPS augmentation system will improve the integrity, availability, accuracy and electromagnetic vulnerability. To takes full advantage of these new signals, the GNSS receiver will be rethought. The objective of this thesis is to develop SBAS-GNSS receiver software for real-time applications to take advantage of these new GNSS signals. To achieve this goal, a channel architecture BPSK (Binary Phase Shift Keying) has been implemented in order to profit from the similarities between different GNSS signals considered in this work. These signals are: GPS L1 CIA, GPS L2C, SBAS L1, L5 SBAS, GLONASS L1 and L2 GLONASS. In addition, this thesis also focuses on implementing a full SBAS solution to improve the accuracy of the navigation solution. BPSK channel tracks GPS L1 CIA, SBAS L1, L5 SBAS, GLONASS L1, L2 GLONASS, COMPASS and COMPASS B1 B2 covering all the band GNSS 1176 MHz to 1602 MHz This channel does not degrade any receiver performance. In fact, the horizontal accuracy is increased from 2.3 m at 1 sigma to 1.1 m at 1 sigma with some minor adjustments. In addition, the implementation of a smoothing algorithm using the carrier improves accuracy up to 0.96 mat 1 cr. The circle of 50% probability (CEP) for the smoothed solution is 0.62 m and for 95% (R95) is 2.21 m. Finally, the implementation of the SBAS solution improves the performance to 0.73 m at 1 sigma, to a CEP of 0.44 m and to a R95 of 1.4 m. Moreover, an improvement of 70% can be observed between the previous works and the actual one when we compare the 1 sigma performance. In addition, new channels and algorithms are also tested dynamically. An improvement of 5% can be observed on the standard deviation of error relative to a Real-Time Kinematics (RTK) solution Keywords: GNSS, SBAS, GPS, WAAS, GLONASS, Galileo, Compass, Positioning

  12. Developpement et utilisation de sources de plasma pour steriliser des instruments medicaux

    NASA Astrophysics Data System (ADS)

    Pollak, Jerome

    Advances in plasma sterilization of medical devices (MDs) are dependent upon both the development of plasma sources adapted to the processing of these MDs, and upon the understanding of the inactivation mechanisms of microorganisms. The main objectives of this thesis were, on the one hand, to develop plasma sources that are spatially uniform and that have a low gas temperature (< 50°C) and, on the other hand, the identification and optimization of biocidal agents (e.g. UV radiation) in their plasmas. In the course of this work, we have designed and developed three types of electromagnetic field applicators to sustain plasma. The first was a network of distributed antennas on the outside of the dielectric discharge-vessel, which possessed multiple high-frequency (HF) input ports fed by a waveguide-based power divider. This distributed source concept was soon abandoned in favour of two other plasma source designs, since the latter ones provided immediate advantages for biomedical sterilization, and also in terms of energy efficiency and frequency bandwidth (e.g. near-constant input impedance). These two plasma sources are based on planar transmission line designs where the plasma is part of the transmission line: the first allows one to sterilize the inner surfaces (lumen) of thermally sensitive dielectric tubes (e.g. cardiac catheters), while the other enables one to immerse three-dimensional objects within the plasma (e.g. forceps). Two types of microorganisms were used to test the performances to identify and to optimise the biocidal agents of the plasma sources that we have developed namely, sedimented bacterial spores from a suspension of Bacillus atrophaeus and vegetative Staphylococcus aureus bacteria embedded in a biofilm matrix. Inactivation of these microorganisms in our plasma sterilizers results through irradiation. This sterilization process is rapid (a few minutes), non-toxic (it does not require venting), and it affects thermally sensitive polymers relatively little (no erosion was detected). Keywords: high-frequency (HF) plasma sources, input impedance, planar transmission lines, sterilization, bacterial spores, biofilm, thermally sensitive medical devices (MDs).

  13. Ajustement automatique des parametres de coupe pour l'obtention de stabilite dynamique en usinage

    NASA Astrophysics Data System (ADS)

    Tabet, Ricardo

    High speed machining has as principal limitation the dynamic stability of the cutting action which can generate premature wear of the machine spindle and the cutting tool, tool breakage and dimensional errors on the machined part. This phenomenon is known in the literature as chatter and is defined as being self-excited vibrations. This master thesis presents an approach applicable to manufacturing environments that allows eliminating chatter in real time during machining of aerospace aluminum alloys before the damaging effect can occur. A control algorithm is developed in order to detect chatter using a microphone and by analyzing the audio signal in the frequency domain. The analysis allows determining precisely the frequency at which the chatter occurs and therefore, the spindle speed is adjusted in order to make the tooth passing frequency equal to the detected chatter frequency. Also, a new feedrate is determined by keeping a constant chip load and within the physical limits of the cutting tool. The new cutting parameters are then sent out to the machine controller as a command using a communication interface between an external computer and the controller. Multiples experimental tests were conducted to validate the effectiveness to detect and suppress chatter. High speed machining tests, between 15 000 and 33 000 RPM, were performed in order to reflect real conditions for aerospace components manufacturing.

  14. Services du Centre de Solutions Pour Les Energies Propres (Fact Sheet)

    SciTech Connect

    Not Available

    2014-05-01

    This is the French translation of the Clean Energy Solutions Center services fact sheet. The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  15. Les materiels didactiques pour l'education en matiere de population

    NASA Astrophysics Data System (ADS)

    Valerien, Jean

    1993-03-01

    The materials developed to promote Population Education are indispensable since teachers have not been prepared to deliver this new type of teaching, using active methods and stressing the acquisition of attitudes rather than knowledge. Early teaching materials gave Population Education a doctrinaire image, focusing on sexual education. More recently, the priority target for the materials has become better defined: rather than trying to convince teachers, attempts are made to discover their needs in order to develop tools that will help them. A rapid survey of Population Education teaching materials, using five representative examples, illustrates their evolution. The quest for an unassailable scientific corpus of Population Education is found in the examples of lessons put forward by the Regional Programme in Asia, in which 25 States are participating. Moreover, Population Education no longer focuses only on demographic knowledge: the dynamics of population change have effects on numerous aspects of the quality of life. In the 1980s, research started by CRESALC resulted in pilot materials of great originality, using discussion, simulation, the media, games, enquiry, etc., which stimulate the active participation of pupils. But in the vast majority of cases, the contents and objectives of Population Education remain integrated into the various subjects of the curriculum.

  16. Pour enseigner la place de l'adjectif (Teaching the Position of Adjectives).

    ERIC Educational Resources Information Center

    Schapira, Charlotte

    1982-01-01

    Proposes a modification of the rule for the position of adjectives in French and indicates a method for applying the modified rule. The method can be used with any textbook. It is recognized to be useful but not infallible. (AMH)

  17. Capteurs et algorithmes pour la localisation autonome en mode pédestre

    NASA Astrophysics Data System (ADS)

    Ladetto, Quentin

    The challenge of knowing one's position in a precise and reliable way, at any time, with an without reception of satellite signals, represents an area fairly explored for the navigation of vehicles. To widen this service to the pedestrians requires a different approach that adapts to the dynamics, to the speed and especially to the total freedom of movement of the people. The traditional approach implements a triad of accelerometers and gyroscopes, which signals are integrated to obtain the relative displacement. This concept is unfortunately not judicious for a low-cost system. The principal reason is that the speed of displacement of a person is lost in the sensor noise level. In order to take into account all these specificities, an occurential approach was developed, based upon a subset of sensors as well as physiological and biomechanical parameters of the walk. This research is devided into three main directions. The first area of interest consists in the determination of the physiological parameters necessary to quantify the speed of walk and the step length. The second part directly relates to the multiple technologies integrated to build an autonomous three-dimensional Pedestrian Navigation Module (PNM). The third part described the integration of the models and measurements as well as the characteristics and treatments specific to pedestrian navigation.

  18. Une ecole elementaire nouvelle pour une societe nouvelle (New Elementary Schools for a New Society).

    ERIC Educational Resources Information Center

    Pare, Andre; Pelletier, Louise

    1971-01-01

    This article, translated into Spanish from the French, discusses changes and increasing complications in society which call for educational reform and improvement. Elementary education, traditionally based on memory skills, should become the setting for the development of mental processes and intellectual skills through the activity of problem…

  19. Ablation par laser pulse de revetements antierosion pour le domaine aeronautique

    NASA Astrophysics Data System (ADS)

    Ragusich, Alexis

    Erosion resistant coatings (ERCs) are frequently used to protect aircraft engine components against erosion, and therefore, to extend their lifetime and reduce maintenance cost. However, after many hours in service, certain areas of the coating will begin to deteriorate. Given that such components are generally very costly, it is desirable to replace only the coating instead of the part itself. This research is part of the MANU 4 project, supported by CRIAQ and NSERC, which aims to study the feasibility of stripping an erosion-resistant coating deposited on a titanium-based alloy with three different techniques: wet chemical etching, plasma etching and pulse laser ablation. This thesis focuses more specifically on the etching with a pulsed laser of a 20-mum thick TiAlN ERC deposited on a Ti-6Al-4V substrate. This work compares the suitability of two pulsed lasers: a femtosecond Ti:Sapphire laser emitting at 800 nm and a nanosecond KrF excimer laser centred at 248 nm. These two lasers were chosen since they are frequently used for micromachining applications and allow us to study the effect of the wavelength and pulse duration. Preliminary findings have allowed us to identify four most critical variables that influence the etch rate and the surface roughness: (i) beam size, (ii) laser power, (iii) stage speed, and (iv) step distance between scanned lines. For each laser, optimal etching conditions were obtained by varying a single parameter at a time. Final results show that the higher energy per pulse offered by the excimer laser allows one to increase by one order of magnitude the etch rate, but almost doubles, from 1 mum to 1.8 mum, the surface roughness, in comparison with results obtained with the Ti:Sapphire laser. Compared with other techniques, pulse laser ablation has the potential to offer very high selectivity. In this regard, plume emission spectroscopy was studied as an in situ technique to monitor the etching progress and determine the precise moment when the laser beam reaches the surface of the substrate. Despite chemical similarities between the coating and the substrate, we show that it is possible to monitor the decrease of the nitrogen line with respect to the titanium reference peak in order to diagnose, in real time, when the etching process should stop. Yet, more effort is still needed to define more precisely the etch stop criteria as a function of the applied laser fluence. Finally, several surface characterization techniques were used to assess the effects of the stripping process on the surface of the substrate after ablation. Contact profilometry has confirmed that the surface roughness is increased to 1-2 mum, compared to the 0.6 mum average roughness of the coating before stripping. EDX and XRD measurements have also confirmed the presence of oxides at the surface of the substrate, a consequence of the oxidation of titanium during the ablation process at atmospheric pressure. Finally, nanoindentation measurements of the polished cross-section of the etched samples have shown that the hardness is not significantly affected during the etching process.

  20. Developpement d'un film antibacterien ayant des proprietes de glissement pour une meilleure processabilite

    NASA Astrophysics Data System (ADS)

    Silverwood, Richard

    Product safety is of crucial importance for the food industry. The challenge of food safety is evidenced by the number of food poisoning in Canada and worldwide. An outbreak of listeriosis in 2008, having put the safety of Canadians at risk, has motivated the revision of the strategy for food safety in Canada. In this context, a collaboration between two major industrial players in Quebec and École Polytechnique de Montréal was initiated. This collaboration is supported by the creation of the Research Chair for safe, smart and sustainable food. One of the many forefront projects of this research chair is to develop a package having a bactericidal effect. Many compounds are currently available for incorporation into a finished product. Zinc Omadine™ by ArchChemicals and Irgaguard™ by BASF are some examples of products that have proven themselves. However, the incorporation of a bactericidal agent in a product having a direct contact with food must meet certain safety criteria. Thus, an overview of various antibacterial agents is made in terms of their effectiveness and their potential use in packaging a food product. To date, no technology allows easy incorporation of an antibacterial agent in a polymer matrix. Antibacterial constituents of the mixture with the polymer melt will provide the simplicity pursued. We chose nano zinc oxide as the main antibacterial agent for its mode of action, its great potential for sustainability and its ability not to migrate out of the polyethylene polymer matrix. Moreover, the effect of trace element at very low concentrations is validated. To increase efficiency, good dispersion is achieved by adding a polyethylene with maleic anhydride grafted groups. The increase in antibacterial properties by this change has been proven. Although these films exhibit a marked bactericidal effect, a lack of persistence of the antibacterial effect was noticed. This is probably due to a rearrangement of the molecular structure on the surface. This rearrangement, due to the polar nature of particles, inhibits the antibacterial effect of the particles, causing them to migrate to a critical distance, outside their scope. Furthermore, we evaluated briefly some other antibacterial agents. Calcium oxide (CaO) demonstrated, although lower than ZnO, an interesting antibacterial potential. The specificity of the bactericidal for gram-positive bacteria for this variance. The addition of iron oxide (Fe2O3) did not, by its hydrophilic properties, increase the bactericidal properties of CaO, simply by mixing them. Also, the use of thymol (component of essential oil of thyme) was effective, even at very low doses. A question mark hangs, however, the sustainability of such an agent. Its use in conjunction with a compatibilizer could result in a much more persistent bactericidal effect, slowing the process of migrating to the film surface. This effect is reduced when the bactericidal thymol is mixed with ZnO in the polyethylene matrix. Finally, a tool for optimizing slip additives was developed. To do this, a correlation that links the absorbance in infrared spectroscopy (ATR reflection) to the surface concentration of the lubricant was developed. By using this correlation, also called master curve, and an infrared spectrometer to test an unknown film, it is possible to find the initial concentration of slip additive. These studies highlight the potential use of zinc oxide and thymol as efficient bactericidal agent for the food industry. This work represents the first effort to develop an antibacterial film, involving nanoscale metal oxides and a polymer matrix of polyolefin.

  1. La reconstruction du sourcil par greffon composite du cuir chevelu: une astuce pour faciliter la technique

    PubMed Central

    El Omari, Mounia; El Mazouz, Samir; Gharib, Noureddine; EL Abbassi, Abdallah

    2015-01-01

    Les sourcils jouent un rôle important dans l’équilibre esthétique du visage. Leur reconstruction ou ophriopoïése, après séquelle de brûlure fait partie intégrante du programme de réhabilitation de la face brûlée. Plusieurs techniques ont été décrites. Nous insistons ici sur l'intérêt d'une technique simple, à la portée de tous les chirurgiens, et dont la méthode et les résultats peuvent être améliorés par un dessin bien planifié des zones donneuse et receveuse: la greffe composite prélevée au niveau du cuir chevelu dessinée à l'aide d'un calque du sourcil controlatéral. PMID:26401195

  2. Primordial Nucleosynthesis in the Rh = ct cosmology: Pouring cold water on the Simmering Universe

    NASA Astrophysics Data System (ADS)

    Lewis, Geraint F.; Barnes, Luke A.; Kaushik, Rajesh

    2016-04-01

    Primordial nucleosynthesis is rightly hailed as one of the great successes of the standard cosmological model. Here we consider the initial forging of elements in the recently proposed Rh = ct universe, a cosmology that demands linear evolution of the scale factor. Such a universe cools extremely slowly compared to standard cosmologies, considerably depleting the available neutrons during nucleosynthesis; this has significant implications for the resultant primordial abundances of elements, predicting a minuscule quantity of helium which is profoundly at odds with observations. The production of helium can be enhanced in such a "simmering universe" by boosting the baryon to photon ratio, although more than an order of magnitude increase is required to bring the helium mass fraction into accordance with observations. However, in this scenario, the prolonged period of nucleosynthesis results of the efficient cooking of lighter into heavier elements, impacting the resultant abundances of all elements so that, other than hydrogen and helium, there are virtually no light elements present in the universe. Without the addition of substantial new physics in the early universe, it is difficult to see how the Rh = ct universe can be considered a viable cosmological model.

  3. Microstructure et proprietes electriques de l'oxyde de vanadium pour les microbolometres

    NASA Astrophysics Data System (ADS)

    Cadieux, Catherine

    Recent technological breakthroughs in the fabrication of microsystems will soon allow the mass production of infrared cameras. Subsequent price cut will open many new sectors of application. Because of its electrical properties, sputtered vanadium oxide has already been identified as the leading candidate for the active material of microbolometers. However, the large number of different crystallographic phases, as well as the instable nature of reactive sputtering, haveled to numerous contradictions in the existing literature. With the objective of understanding the impact of the deposition parameters on the microstructure, and of the microstructure on the electrical properties, vanadium oxide thin films have been deposited and characterised. In order to study their impact on the microstructure, oxidation state and pulse at the target, substrate bias and temperature, power, and film thickness were varied independently. The resulting thin films have been characterised by X-ray diffraction, Rutherford backscattering spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, spectral reflectometry, optical interferometry as well as four-point probe and Van Der Pauw electrical measurements. Because of the instability of the poisoning regime, the actual system configuration forbids the deposition of phases with composition between V 3O7 and V7O3. Films deposited under a strong bias in the poisoned regime having the best properties, their growth mechanism has been thoroughly investigated. Under those conditions, the bombarding ions are energetic enough to modify the structure of the underlying thin film without resputtering it. A complex relation linking temperature, thickness and microstructure is observed. As the thickness is increased, the structure changes from amorphous, to almost monocristalline V2O5 (001) oriented, to polycristalline. For higher deposition power, the polycristalline section contains V3O7 in addition to the multiple orientations of V2O5. Those germinations which have already been observed but not explained in literature can be attributed to the accumulation of germination centers, a stress buildup for the crystalline sections, and a substrate heating caused by the ions bombardment. This last effect is also suggested to be the cause of the amorphous phase crystallisation for the films with longer deposition times. Films deposited at different temperatures show the same microstructure transitions. Two different behavior regimes can be proposed as function of the adatoms' energy. For low temperature, increasing the adatom energy increases the diffusion which promotes the formation of the lowest surface energy stoichiometry and orientation, V2O 5(001). At higher temperature, energy is sufficient to form more energetically expensive orientation and phases. Resistivity is strongly dependant on grain boundaries density as seen by its relationship with lateral grain size. The thin film resistivity is also increased with the number of different crystallographic orientation present in it. To circumvent the high sheet resistance of the deposited single layer films, a multilayer stacking of alternating oxides and metal layers has been deposited. This approach has permitted this project's industrial collaborator to obtain a sheet resistance of 250 kO/□and a TCR of -1.59 %/K. The microstructure of the multilayer is however very heterogeneous. Not only can the metal layers be identified, it is also possible to observe the amorphous to polycrystalline transition described higher for every oxide layer. This multilayer, as well as the best single layer film produced have been annealed for 2 hours at 400°C in high vacuum. The annealed multilayer doesn't show any diffraction peaks, has very low resistance, and an almost null TCR generally attributed to metallic compounds We suggest that the diffusion of the vanadium layers into the stack created a polycrystalline structure with grains that are too small to be seen by XRD. The single layer underwent thermal reduction to form the VO2(B)phase and also became very conductive. Its TCR was afterward measured at the interesting value of -1.74 %/K. Is it suggested that the low resistivity is caused by the presence of small grains of the metallic phase of VO2, which happens to be the next step in the reduction process. Single layer annealing seems to be a promising avenue for the development of films adequate for microbolometer integration with the present deposition system. It is nonetheless recommended to pursue this avenue using films that are homogenous on their thickness in order to decouple the thickness dependence of deposition and thermal reduction. Multilayers using already homogenous amorphous oxides can also be a solution. Finally, non-reactive deposition of tungsten doped thin films followed by an oxidizing anneal may be an option that would bypass the uniformity and stability problems of the present project.

  4. Caracterisation electrique de materiaux en composite pour fuselages d'avions

    NASA Astrophysics Data System (ADS)

    Tse, William

    2011-12-01

    In the last decade or so, the rise of oil price is being felt all over the world. Oil being one of the primary sources of energy highly exploited, it plays a great role in the today's world economy, especially in the transport domain. To remain competitive, companies striving in this domain need therefore to modify their approach in the design phase of new or improved products. In the aerospace industry for example, weight reduction in aircraft structures have become a primordial aspect in the design phase of new models making them lighter and more efficient. In the framework of this project, the research is related to new weight-reduction of structural materials used in aircrafts. As of today, much research effort has been undertaken to find good substitutes to replace the materials presently used (aluminum). Several materials such as aluminum-lithium and carbon fibre composite bring great interest as substitutes. This last one presents superior mechanical properties over aluminum such as lightweight and rigidity; its electrical properties though remain still ambiguous. The objective of this project, proposed by Bombardier Core EMC, is to find a way to characterize the composite in a conventional way that would allow an extraction of its electrical properties (permittivity (epsilonr), conductivity (sigma), etc). In this Master thesis, the existing studies and characterization approaches for the composite material are presented and discussed. These approaches will help anticipate the electrical behaviour of the composite material under test. A comparison between known elements (ex: aluminum) and the composite material will also be tackled in order to gauge its conductivity level, particularly for low frequencies (≈ MHz), and up to high frequencies (≈ 12 GHz). Finally, some tests have been simulated with electromagnetic modelling software in order to reproduce and validate the experimental results. At the end of the thesis, a discussion/conclusion presenting the results and validating their integrity is given. The results enable us to do an estimation of the composite's conductivity and to observe its attenuation properties in function of the frequency. The tests were made with composite laminated panels without wire mesh. The wire mesh here is a copper matrix integrated at the exterior surface of the composite for added electromagnetic protection.

  5. Development of polyisocyanurate pour foam formulation for space shuttle external tank thermal protection system

    NASA Technical Reports Server (NTRS)

    Harvey, James A.; Butler, John M.; Chartoff, Richard P.

    1988-01-01

    Four commercially available polyisocyanurate polyurethane spray-foam insulation formulations are used to coat the external tank of the space shuttle. There are several problems associated with these formulations. For example, some do not perform well as pourable closeout/repair systems. Some do not perform well at cryogenic temperatures (poor adhesion to aluminum at liquid nitrogen temperatures). Their thermal stability at elevated temperatures is not adequate. A major defect in all the systems is the lack of detailed chemical information. The formulations are simply supplied to NASA and Martin Marietta, the primary contractor, as components; Part A (isocyanate) and Part B (poly(s) and additives). Because of the lack of chemical information the performance behavior data for the current system, NASA sought the development of a non-proprietary room temperature curable foam insulation. Requirements for the developed system were that it should exhibit equal or better thermal stability both at elevated and cryogenic temperatures with better adhesion to aluminum as compared to the current system. Several formulations were developed that met these requirements, i.e., thermal stability, good pourability, and good bonding to aluminum.

  6. Modelisation de l'architecture des forets pour ameliorer la teledetection des attributs forestiers

    NASA Astrophysics Data System (ADS)

    Cote, Jean-Francois

    The quality of indirect measurements of canopy structure, from in situ and satellite remote sensing, is based on knowledge of vegetation canopy architecture. Technological advances in ground-based, airborne or satellite remote sensing can now significantly improve the effectiveness of measurement programs on forest resources. The structure of vegetation canopy describes the position, orientation, size and shape of elements of the canopy. The complexity of the canopy in forest environments greatly limits our ability to characterize forest structural attributes. Architectural models have been developed to help the interpretation of canopy structural measurements by remote sensing. Recently, the terrestrial LiDAR systems, or TLiDAR (Terrestrial Light Detection and Ranging), are used to gather information on the structure of individual trees or forest stands. The TLiDAR allows the extraction of 3D structural information under the canopy at the centimetre scale. The methodology proposed in my Ph.D. thesis is a strategy to overcome the weakness in the structural sampling of vegetation cover. The main objective of the Ph.D. is to develop an architectural model of vegetation canopy, called L-Architect (LiDAR data to vegetation Architecture), and to focus on the ability to document forest sites and to get information on canopy structure from remote sensing tools. Specifically, L-Architect reconstructs the architecture of individual conifer trees from TLiDAR data. Quantitative evaluation of L-Architect consisted to investigate (i) the structural consistency of the reconstructed trees and (ii) the radiative coherence by the inclusion of reconstructed trees in a 3D radiative transfer model. Then, a methodology was developed to quasi-automatically reconstruct the structure of individual trees from an optimization algorithm using TLiDAR data and allometric relationships. L-Architect thus provides an explicit link between the range measurements of TLiDAR and structural attributes of individual trees. L-Architect has finally been applied to model the architecture of forest canopy for better characterization of vertical and horizontal structure with airborne LiDAR data. This project provides a mean to answer requests of detailed canopy architectural data, difficult to obtain, to reproduce a variety of forest covers. Because of the importance of architectural models, L-Architect provides a significant contribution for improving the capacity of parameters' inversion in vegetation cover for optical and lidar remote sensing. Mots-cles: modelisation architecturale, lidar terrestre, couvert forestier, parametres structuraux, teledetection.

  7. When It Rains It Pours: Crises at Oakmont University SACSA Case Study

    ERIC Educational Resources Information Center

    Akers, C. Ryan; Heiselt, April K.

    2009-01-01

    This article presents a case study at Oakmont University where a presidential debate will be held on campus. Oakmont University is a large public research institution located in the Southeastern United States. This Carnegie Doctoral/Research I institution enrolls more than 35,000, 75% undergraduate and 25% graduate students. Located in somewhat of…

  8. Professionnalisation ou Deprofessionnalisation: Une Base Conceptuelle pour L'evaluation de La Competence en Psychologie.

    ERIC Educational Resources Information Center

    Perron, Jacques; And Others

    1980-01-01

    Elements of professionalization--systematic body of theory, social recognition, monopoly, and degree of organization--are presented and applied to the development of professional psychology in Quebec. The concept of deprofessionalization is introduced as an alternative basis for evaluating competence in professional psychology. (Author)

  9. Evaluation d'un Programme de Developpement Vocationnel pour Les Adolescents (Vire-Vie).

    ERIC Educational Resources Information Center

    Riverin-Simard, Danielle

    1980-01-01

    Evaluated effects of "Wheel of Fortune," a vocational program for adolescents. This program was developed in the United States and tested on secondary students in Quebec. Results indicated a positive increase with respect to work values on the climate scale of the Perron and Dupont Work Values Questionnaire. (Author/BEF)

  10. Intrinsically disordered proteins and prostate cancer: pouring new wine in an old bottle

    PubMed Central

    Kulkarni, Prakash

    2016-01-01

    An inconvenient truth in urology is that despite decades of intense research, prostate cancer (PCa) has remained one of the most prevalent cancers and leading cause of cancer-related deaths in men, particularly in the industrialized world.1 It is rather sobering to acknowledge that even with early diagnosis and treatment, the incidence and death due to the disease are almost paradoxically projected to increase in the coming decades.2 PMID:27427556

  11. ANALYTICAL RESULTS OF MOX COLEMANITE CONCRETE SAMPLE POURED MAY 4, 2012

    SciTech Connect

    Cozzi, A.; Best, D.; Reigel, M.

    2012-06-14

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use Colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses. The Savannah River National Laboratory is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. Sample 04 May 12/Test/S1-1, S1-2, and S1-3 was received on 5/9/2012 and analyzed. The total density measure by the ASTM method C 642 was 2.00 g/cm{sup 3}, within the lower bound of 1.88 g/cm{sup 3}. The partial hydrogen density of 6.35E-02 g/cm{sup 3} as measured using method ASTM E 1311 met the lower bound of 6.04E-02 g/cm{sup 3}. The measured partial boron density of 1.88E-01 g/cm{sup 3} exceeded the lower bound of 1.65E-01 g/cm{sup 3} when the sodium peroxide fusion dissolution method was used in place of the prescribed ASTM C 1301 method.

  12. Conception preliminaire de disques de turbine axiale pour moteurs d'aeronefs

    NASA Astrophysics Data System (ADS)

    Ouellet, Yannick

    The preliminary design phase of a turbine rotor has an important impact on the architecture of a new engine definition, as it sets the technical orientation right from start and provides a good estimate of product performance, weight and cost. In addition, the execution speed at this preliminary phase has become critical into capturing business opportunities. Improving upfront accuracy also alleviates downstream detailed design work and therefore reduces overall product development cycle time. This preliminary phase contains elements slowing down its process, including low interoperability of currently used systems, incompatibility of software and ineffective management of data. In order to overcome these barriers, we have developed the first module of a new Design and Analysis (D&A) platform for the rotor disc. This complete platform ensures integration of different tools processing in batch mode, and is driven from a single graphical user interface. The platform developed has been linked with different optimization methods (algorithms, configuration) in order to automate the disc design and propose best practices for rotor structural optimization. This methodology allowed reduction in design cycle time and improvement of performance. It was applied on two reference P&WC axial discs. The platform's architecture was also used in the development of reference charts to better understand disc performance within given design space. Four high pressure rotor discs of P&WC turbofan and turboprop engines were used to generate the technical charts and understand the effect of various parameters. The new tools supporting disc D&A, combined with the optimization process and reference charts, has proven to be profitable in terms of component performance and engineering effort inputs.

  13. Transfert de signaux de rythme et synchronisation pour les besoins du VLBI Spatial.

    NASA Astrophysics Data System (ADS)

    Daigne, G.

    Space VLBI, or one of the radiotelescopes placed into orbit, is a further challenge in radio-interferometry, the coordinates of this array element being poorly related to the other ones in a common reference system. The two space VLBI missions being prepared for a launch in 1995 are shortly described. The author shows the crucial role of a bi-directionnal radio link for transferring a very stable time scale to the satellite, and the influence of the propagation medium on the quality of the transfer. A by-product of the two way link is a precise Doppler measurement which will help in the orbit determination prior to processing the observations. The transferred time scale being left with a degree of freedom, this should trigger new investigations towards the search of a canonic formulation for the equation of the interferometric delay, particularly for a very long and linked interferometer.

  14. Utiliser la presse ecrite pour construire son cours (Using the Print Media for Constructing a Course).

    ERIC Educational Resources Information Center

    Canto, Helene

    1991-01-01

    Ways in which the French teacher can use print media for language skill development are offered. Classroom techniques for exploiting these texts for instruction in grammar, reading comprehension, writing, and oral expression are presented, including ideas for selecting a variety of authentic materials. (MSE)

  15. Cours de Hausa pour le Niger. Trainees' Manual (Hausa Course for Nigeria. Trainees' Manual).

    ERIC Educational Resources Information Center

    Bellama, David

    The student manual of a Hausa language course is designed for the training of Peace Corps volunteers in Nigeria. It consists of 12 lessons emphasizing grammar and vocabulary development for interpersonal communication. Lesson topics include daily communication needs and market vocabulary and expressions. The lessons contain information and…

  16. Pour une rhetorique du quotidien. Recherches Sociolinguistiques 4. (Toward a Rhetoric of Daily Language Use).

    ERIC Educational Resources Information Center

    Martel, Guylaine

    A study, based on a single sociolinguistic interview conducted in French in Canada, analyzed language patterns typical of daily interaction, particularly that found in argumentation. It is found that speakers show a natural ability to use reasoning and processes to construct an argument adapted to the particular communication situation. Such an…

  17. Conception et exploitation d'une structure active pour une aile laminaire adaptative experimentale

    NASA Astrophysics Data System (ADS)

    Coutu, Daniel

    This doctoral research contributed to the success of the project CRIAQ 7.1, demonstrating the capability of a morphing laminar wing to reduce fuel consumption. Respectively, this thesis shows the design of the experimental wing and its operation in a subsonic wind tunnel (Mach numbers of 0.2 to 0.3 with angles of attack between -1 and 2°). First of all, the morphing wing is formed of a composite laminate linked to an actuation system to build an active structure capable of modifying the wing upper surface geometry. The design was performed using a new developed methodology to solve aero-structural problems. Using ANSYS software, the finite elements method was applied to model the different possible active structure configurations Aerodynamic loads applied over the active structure as well as targeted morphed geometries have been provided by the Ecole Polytechnique team. Next, laminar flow enhancements allowed by each active structure configuration we' re evaluated using the aerodynamic solver XFoil 6.96. A best trade-off between aerodynamic performance and energy needed for wing morphing was found using a multi-objective optimization technique. Among the retained stable configurations, a 4-ply composite laminated shell driven by 2 actuation lines was retained. Thereafter, the research effort focused on the exploitation of the morphing capabilities of the experimental wing over each given set of flow conditions. Therefore, once the prototype was built, the structural model was refined, calibrated and coupled with the aerodynamic solver to accurately predict the aero-structural behavior in the wind tunnel. Optimal morphing wing shapes were numerically calculated using a generalized pattern search algorithm and a local search routine to refine the solution. In the wind tunnel, this open-loop control approach allowed an average 25% laminar flow regime extension over the wing prototype upper surface. Consequently, an average 18.5% profile drag reduction was measured by the pressure survey rake across the wake. Although these results were satisfactory, limitations in the aero-structural coupled model were observed when comparing numerical and experimental responses of the prototype. For that reason, the research continued with the development of a real-time optimization strategy in closed loop to exploit the complete potential of the morphing laminar wing. The wind tunnel balance was used as a hardware-in-the-loop returning the instantaneous lift-to-drag ratio to the optimizer. An optimization algorithm has been built to minimize the actuation required and thus reduce the time period until convergence to the optimal shape. To accelerate the search, numerically predicted actuation strokes (open loop) were used as initial modified shapes. As measured in the wind tunnel, the use of the closed-loop control strategy resulted in an average lift-to-drag ratio increase from 11 to 12.2% as compared to the open-loop approach. No more than 4 additional minutes were required to converge to the real-time optimized shapes, an acceptably small time delay on the cruise flight period time scale. Finally, infrared measurements performed byt the IAR-NRC team allowed experimental demonstration of the reciprocity between the laminar flow improvement and the lift-to-drag ratio increase. Keywords: morphing laminar wing, finite elements, design, active structure, composite structure, wind tunnel tests, multi-objective optimization, real-time optimization, actuators, shape memory alloy.

  18. Notable Canadian Children's Books. 1983 Supplement = Un choix de livres Canadiens pour la jeunesse. Supplement 1983.

    ERIC Educational Resources Information Center

    Aubrey, Irene E., Ed.; And Others

    This annotated bibliography reviews 32 children's books published in Canada in 1983. The list is arranged alphabetically by author and annotations and reviews are included in both English and French. Each book is designated as suitable for a particular age group. The 18 books published in English and the 14 published in French are reviewed in…

  19. Estimating heat production in the detonation of poured-density ammonium perchlorate

    SciTech Connect

    Martynyuk, V.F.; Khasainov, B.A.; Sulimov, A.A.; Sukoyan, M.K.

    1987-07-01

    The authors use an electromagnetic method to measure the mass-velocity profile in the detonation of a tamped charge of ammonium perchlorate (APC) in a strong shell. The profile for the mass velocity in the detonation wave was recorded by a two-arm electro-magnetic sensor. Calculations on the two-phase medium together with the mass-velocity profile are shown. High porosity at the front is found; much of the material burns at the front, during the first 0.5 ..mu..sec, which agrees with previous data. It is shown that the porosity in shock compression by a wave of amplitude 10 GPa would be not less than 0.2-0.45, which conflicts with the traditional mass velocity for complete pore collapse in strong shock waves.

  20. Potentiel de l'utilisation des melanges hydrocarbures/alcools pour les moteurs a allumage commande

    NASA Astrophysics Data System (ADS)

    Broustail, Guillaume

    For the past few years, the oil stock decrease encourages the different countries to increase their energy independence. Moreover, reducing the environmental impact of transportation became one of the priorities of our society. In this way, European emissions standards are stricter while several pollutants have been identified to have a negative impact on health and the environment. To answer this double problem, the use of alcohols biofuels in sparkignition engines is one the promising ways. The European Union have already taken a small step in that direction by allowing a maximum of 10% of ethanol into gasoline. As well as ethanol is already marketed, Biobutanol, a 2nd generation biofuel, appears as a serious candidate with a strong potential for a spark-ignition engines use. The objective of this dissertation is to study the potential of the iso-octane/butanol blends use in spark-ignition engines, in terms of performance and pollutants emissions. Moreover, these results are compared to iso-octane/ethanol blends. The heat release in spark-ignition engine is piloted for a part by laminar burning velocity. This characteristic was studied experimentally and numerically for different initial conditions (pressure and equivalence ratio) in a constant volume bomb. Then, the early flame kernel growth was studied in an spark-ignition single cylinder engine equipped with optical accesses. Those results were correlated with the results on the laminar burning velocity. Finally, regulated and non-regulated pollutants emissions and engine performance were investigated in a spark-ignition single cylinder engine. A decrease of most pollutant emissions was observed with both alcohols addition.

  1. L'ÉDUCATION Musicale pour la Formation D'une IDENTITÉ EUROPÉENNE Pluraliste

    NASA Astrophysics Data System (ADS)

    Albarea, Roberto

    1997-01-01

    This paper presents some of the elements which have been typical of music in different contexts and cultures, and describes an approach to musical phenomena which relates them to the intercultural and interdisciplinary dimension of lifelong education (music considered as a cultural good, an expression form, a field of creativity, an artistic production and an aesthetic experience). From the educational point of view, the aim is to form "multi-musical" individuals. In this framework are set the problem of musical identity and the need to spell out that identity in relation to stereotypes (popular music, classical music, folk music, etc.) and the differing shades of diversity. Particular attention needs to be given to the question of the universals seen in the psychology of music and the configuration of musical phenomena as structures which are organized hierarchically in several dimensions. In short, music in all its forms can help to form a dynamic, pluralist identity in the European context.

  2. Developpement d'une methode hybride pour le suivi du coeur et la gestion du combustible

    NASA Astrophysics Data System (ADS)

    Frenette, Eric

    The nuclear industry of CANDU reactors uses neutron physics methodologies (core follow-up, fuel management) that are considered out of date and do not reflect the latest developments in the field of neutronics. For instance, the software used by the reactor physics team in Gentilly-2, HQSIMEX 3, uses macroscopic cross sections ("grid-based" approach) calculated by two methods: (1) The "four factors" formula, an obsolete technique used in 1950; (2) The WIMS software, based on a microscopic cross section library. Among other method, the history-based approach is considered more precise but requires greater computing time. Processing a whole CANDU core follow-up through the history-based approach is not possible as of today with the actual computers, due to computing cost issues. The main goal of this research is to come up with a new strategy that will combine the interpolation technique of the "grid-based approach" with the isotopic depletion follow-up of the "history-based" approach.

  3. Bibliographie pour enseigner le francais des affaires (Bibliography for Business French Instruction).

    ERIC Educational Resources Information Center

    Dewey, S. Pascale

    This bibliography contains a list of various publications (books, journals, dictionaries, newspapers, magazines) as well as videos, CD-ROMs, Web sites, and the addresses of several French chambers of commerce that would be useful for any English speakers needing to live, do business, or otherwise spend time in France. References are in French or…

  4. Utiliser la Dimension Europeenne Pour Faire Sortir l'Ecole de ses Murs ou "Extra Muros."

    ERIC Educational Resources Information Center

    Champollion, Pierre

    2002-01-01

    Five European institutions devoted to principal training developed the Comenius project "Extra Muros" between 1996-99. Its objectives were understanding the importance of educative action outside the school in order to provide equal opportunity to all students, as well as to promote the awareness of Europe among schools. The project facilitates…

  5. Utilisation des technologies d'impression pour le remplissage industriel des trous d'interconnexion

    NASA Astrophysics Data System (ADS)

    Blonde, Paul

    This master project concerns a feasibility study about the use of inkjet drop-on-demand to fill through silicon vias in MEMS "via last" microfabrication process. The aim of our research was to develop a comprehensive process based on the use of a dispersion of a gold/tin alloy (Au80Sn 20) of nanoparticles in suspension in a carrier fluid. Our work mainly focused on the preparation of stable suspensions of nanoparticles and on the high precision filling of the vias. We first developed a method to form a stable suspension of nanoparticles in a carrier fluid using a surfactant, polyvinylpyrrolidone (PVP). Tests performed on various solvents allowed us to determine that isopropanol was the best carrier fluid to achieve high volume fractions of suspended nanoparticles. The volume fraction of the stable dispersion with the highest content reached 11 %. The conditions to generate stable individual microdroplets from a piezoelectric printing actuator were then analyzed. The generation of monodisperse microdroplets beiing a complex process, partly described by Fromm's theory and the theory of waveguides, we investigated the operating conditions permitting to precisely set the drop volume and ejection velocity. We therefore characterized an "ejectability zone" model universally usable to generate microdrops with desired output parameters based on the amplitude, width, and frequency of the electric pulse applied to the piezoelectric actuator of a print head having a 50 mum diameter aperture. We also developed a theoretical kinematical model describing the trajectories of microdrops during printing in order to understand the influence of their volume and initial velocity on the accuracy, reproducibility and homogeneity of the deposits in the presence of air fluctuations. This model was implemented in MATLAB and validated in real operating conditions. The results showed that a print head with a 50 mum diameter aperture will generate microdroplets with diameters between 30 and 60 microns with a maximum placement error on the substrate of the order of +/- 20 microns. We estimated that filling TSVs with an opening of 70 microns and higher is possible with our inkjet DOD (non defined) process. Finally, we experimentally addressed the vias filling by studying the behavior of nanoparticles in the vias during the evaporation of the carrier fluid and the annealing of the gold/tin alloy nanoparticles of eutectic composition. This last step revealed the incompatibility of non-homogenous AuSn alloy particles with the temperature window requirement used during sintering. To overcome this defect we replaced the Au80Sn20 by tin nanoparticles to complete our analysis of the impact of the use of PVP in the suspension of nanoparticles on the resistivity after annealing in the vias. Most aspects of this project being interrelated, much attention has been paid to the study of the influence of the various parameters on the quality of prints realized. The main conclusion is that we are able to validate the use of inkjet technologies as an alternative to perform the filling of TSVs by metal alloy nanoparticles. This conclusion is subject to the feasibility of the adaptation of our suspension and annealing methods to nanopowders alloys other than gold/tin and tin.

  6. Spatial variability of pouring rain in the City of Málaga. (South of Spain)

    NASA Astrophysics Data System (ADS)

    Senciales Gonzalez, J. M.; Aguayo Maldonado, P.; Ruiz Sinoga, J. D.; Martinez Murillo, J. F.

    2012-04-01

    Several studies demonstrate the spatial and temporal variability of rainfall in the Mediterranean climate (Llasat et al., 2005; Neppel et al., 2007; Rodrigo and Derieg, 2008), as well as episodes of atmospheric dynamics which tend to intervene in such events (Llasat et al., 2005; Martin et al., 2006). Considering that the recurrence of torrential events is usual in the southwest of the Mediterranean Coastal areas and occasionally its difficult to structure, the study of the highest events were restricted to those that exceed 100 mm in 24 hours. The study of these events is very important to analyze the vulnerability of urban areas, taking as an example the case of the city of Malaga (South of Spain) Elías y Ruiz (1979) were calculated for the city of Málaga a maximum value of 220-240 mm for a period of 100 years return; and a maximum of 60 mm/h for 10 years. In the same area, the probability estimates by Senciales (1997) from a single station indicate a recurrence of between 10 and 25 years for such events. But with a wide number of stations a greater cumulative frequency is obtained. The city of Malaga has been divided into various sectors according to their topography, proceeding to multivariate analysis with SPSS-18 of maximum and average values greater than 100 mm. precipitation and linking them with the following independent variables: month of the year of the event, situation in altitude, wind in surface and surface situation. The best results were obtained by dividing the city into four sectors; Valley area, East Coast (steep), foothills (moderately steep) and mountains (steep). The units of the average values by sector with regard to the situation in area (depression, frontal system or occluded frontal system) and height (flow of cold air or cold drop) reached significant values (r2 > 0.5 and even > 0.9) repeated by dividing the city in only three areas, Valley, East Coast and mountains but with minor adjustment in the latter. Torrential events showed no dependence -against expected- on the month of the year are presented, except for a small relation (r2 =0.4-0.5) to analyze them together with the situation in height in the Valley and East Coast areas. The calculation of the recurrence of such events, according with other studies in the area has been added to these analyses (Lavee et al., 1998; Ruiz Sinoga et al., 2010; López-Bustins et al., 2008), showing a certain increase in their frequency over the past 60 years.

  7. L'enseignement des langues: Pour qui? Pour quoi? (Language Teaching: For Whom? For What Purpose?). Proceedings of the annual Symposium of the Canadian Association of Applied Linguistics (7th, Sherbrooke, Canada, May 6, 1976). Publication B-62.

    ERIC Educational Resources Information Center

    Taggart, Gilbert, Ed.

    These 16 papers in French and English deal with questions related to the purpose of learning a language, one's native language as well as a second one. Specifically, the presentations deal with the following topics: (1) consideration of learners' needs; (2) the usefulness of learning English in Quebec; (3) the tension between knowledge and…

  8. Approches interlinguistiques de la complementation verbale: Quels savoirs pour l'enseignant? Quels savoirs pour l'eleve? (Interlinguistic Approaches to Object-Verb Complementation: What the Teacher Needs To Know? What the Student Needs To Know?).

    ERIC Educational Resources Information Center

    Beguelin, Marie-Jose, Ed.; de Pietro, Jean-Francois, Ed.; Naf, Anton, Ed.

    2002-01-01

    This issue deals with verb-object complementation, a complex and controversial but important topic, in particular in connection with the teaching and learning of a second language. The articles are a response to a long debate about the harmonization of grammatical terminology used in schools and the simplification of grammar for students. The…

  9. The family planning movement within the African Region of the International Planned Parenthood Federation. Le mouvement pour la planification familiale dans la Region Afrique de la Federation Internationale pour la Planification Familiale.

    PubMed

    Sozi, M K

    1984-09-01

    The African Region of International Planned Parenthood Federation (IPPF) was established in 1971 to: encourage and sustain voluntary groups, provide information about family planning as a basic right, provide limited family planning services where acceptable and needed, and eventually influence change in public opinion so that governments could accept some responsibility for family planning programs. Today almost all of Anglophone Africa is covered by IPPF-funded activities, progress is being made in Francophone Africa, and Lusophone Africa is a target for the 1980s. National family planning associations and the IPPF have laid a firm foundation for family planning and raised its credibility to acceptable levels. However, both inadequate logistic infrastructures for the smooth flow of services and overcaution in adopting innovative methods such as community-based delivery systems to those not easily reached by coventional delivery systems have led service to lag behind demand. Leaders at all levels must join efforts to solve this dilemma. Family planning associations are the best suited channels for family planning work in the African Region, but they lack the capacity to cover all needs. As a result, these associations are shiftingg their efforts toward supplementing government work in this area. Although the government response has been far from uniform, governments have shown an ability to accommodate the operations of family planning organizations and have integrated family planning into national health services. Although 19 governments in the Region consider the fertility levels in their countries to be satisfactory and a few consider fertility too low, family planning is accepted as an instrument for the promotion of family welfare. The importance of national leadership in promoting and implementing family planning programs is increasingly recognized. Parliamentarians can formulate national policies favorable to family planning, promote awareness among their constituencies, and vote for more resources for the family planning effort. PMID:12266425

  10. Gryphopsylla segregata Beaucournu & Sountsov, 1999 : Nouveau statut pour G. jacobsoni segregata, description de la femelle et proposition d’une nouvelle clé pour le genre Gryphopsylla traub, 1957 (Siphonaptera – Pygiopsyllidae – Stivaliinae)

    PubMed Central

    Beaucournu, J.-C.; Wells, K.

    2011-01-01

    La collecte d’une femelle de Gryphopsylla jacobsoni segregata Beaucournu & Sountsov, 1999 du nord de Bornéo nous permet de modifier le statut de ce taxon en celui de bonne espèce, proche mais distincte de G. jacobsoni (Jordan & Rothschild, 1922). La femelle de G. segregata est décrite et une clé remise à jour de ce genre est donnée. PMID:21894266

  11. Nouvelle methode d'integration energetique pour la retro-installation des procedes industriels et la transformation des usines papetieres

    NASA Astrophysics Data System (ADS)

    Bonhivers, Jean-Christophe

    The increase in production of goods over the last decades has led to the need for improving the management of natural resources management and the efficiency of processes. As a consequence, heat integration methods for industry have been developed. These have been successful for the design of new plants: the integration principles are largely employed, and energy intensity has dramatically decreased in many processes. Although progress has also been achieved in integration methods for retrofit, these methods still need further conceptual development. Furthermore, methodological difficulties increase when trying to retrofit heat exchange networks that are closely interrelated to water networks, such as the case of pulp and paper mills. The pulp and paper industry seeks to increase its profitability by reducing production costs and optimizing supply chains. Recent process developments in forestry biorefining give this industry the opportunity for diversification into bio-products, increasing potential profit margins, and at the same time modernizing its energy systems. Identification of energy strategies for a mill in a changing environment, including the possibility of adding a biorefinery process on the industrial site, requires better integration methods for retrofit situations. The objective of this thesis is to develop an energy integration method for the retrofit of industrial systems and the transformation of pulp and paper mills, ant to demonstrate the method in case studies. Energy is conserved and degraded in a process. Heat can be converted into electricity, stored as chemical energy, or rejected to the environment. A systematic analysis of successive degradations of energy between the hot utilities until the environment, through process operations and existing heat exchangers, is essential in order to reduce the heat consumption. In this thesis, the "Bridge Method" for energy integration by heat exchanger network retrofit has been developed. This method is the first that considers the analysis of these degradations. The fundamental mechanism to reduce the heat consumption in an existing network has been made explicit; it is the basis of the developed method. The Bridge Method includes the definition of "a bridge", which is a set of modifications leading to heat reduction in a heat exchanger network. It is proven that, for a given set of streams, only bridges can lead to heat savings. The Bridge Method also includes (1) a global procedure for heat exchanger network retrofit, (2) a procedure to enumerate systematically the bridges, (3) "a network table" to easily evaluate them, and (4) an "energy transfer diagram" showing the effect of the two first principles of thermodynamics of energy conservation and degradation in industrial processes in order to identify energy savings opportunities. The Bridge Method can be used for the analysis of networks including several types of heat transfer, and site-wide analysis. The Bridge Method has been applied in case studies for retrofitting networks composed of indirect-contact heat exchangers, including the network of a kraft pulp mill, and also networks of direct-contact heat exchangers, including the hot water production system of a pulp mill. The method has finally been applied for the evaluation of a biorefinery process, alone or hosted in a kraft pulp mill. Results show that the use of the method significantly reduces the search space and leads to identification of the relevant solutions. The necessity of a bridge to reduce the inputs and outputs of a process is a consequence of the two first thermodynamics principles of energy conservation and increase in entropy. The concept of bridge alone can also be used as a tool for process analysis, and in numerical optimization-based approaches for energy integration.

  12. Un profil de compétences pour les professeurs d'informatique de l'enseignement secondaire camerounais

    NASA Astrophysics Data System (ADS)

    Fouda Ndjodo, Marcel; Ngah, Virginie Blanche; Zobo, Erick Patrick

    2013-07-01

    A competency profile for teachers of Computer Science in Cameroonian secondary education - In 1998, the Cameroonian government decided to introduce Computer Science as a school subject. To implement this decision, it began to train teachers of Computer Science according to the same training model used for teachers of other disciplines. Despite the consensus that seems to be emerging from the scientific community regarding the need to give priority to a cross-disciplinary use of information and communication technologies (ICT) in primary and secondary education, some countries, such as Cameroon, have opted to teach Computer Science. While such a political choice might in principle appear to be inappropriate for the development of students' ICT skills, the article shows that it nevertheless introduces teachers into the system who have a predisposition to act as catalysts for the pedagogical integration of ICT. Such a development could occur provided these teachers are trained in a range of additional skills - those proposed in the article - which would enable them to contribute effectively. If this approach were implemented, sub-Saharan countries such as Cameroon would, in their Computer Science teachers, have access to human resources capable of quickly generalising the cross-disciplinary use of ICT in the education system.

  13. Cadre de planification integree de la chaine logistique pour la gestion et l'evaluation de strategies de bioraffinage forestier

    NASA Astrophysics Data System (ADS)

    Dansereau, Louis Patrick

    Biorefining is now recognized as a promising solution to transform the struggling forestry industry and to generate value-added pathways. The implementation of new products and processes will help companies to diversify revenues, but implies several strategic changes in the business model. Companies will face the dilemma of exiting or not traditional pulp and paper operations, while selecting their biorefinery product and process portfolio. As well, they will have to enter new markets and manage production to minimize the risk of market volatility. Over the past decades, both industry and academia paid a lot of attention to supply-chain management in order to increase the cost effectiveness of overall operations. The application of supply-chain management concepts could therefore greatly help the transforming North American forestry industry to compete globally. The objective of this Ph.D. project was to propose and illustrate an integrated supply-chain planning framework for the management and the evaluation of forest biorefinery strategies. This framework, named margins-based , integrates principles from revenue management, activity-based cost accounting, and manufacturing flexibility in a tactical planning model that maximizes profit of a company. The structure of the mathematical model and its associated cost model aims to represent as closely as possible the activities of a company, from procurement to sales. It enables the modeling of different process configurations leading to manufacturing flexibility. The model can thus be used as a platform for evaluating various operating strategies of a company, at both production and supply-chain levels. A case study of a newsprint mill implementing a parallel biomass fractionation line producing several bioproducts was used to illustrate this margins-based approach. Various strategic and tactical analyses were conducted to show the relevance of the approach as a decision-making tool for management problems related to the forest biorefinery. The model was used to evaluate the profitability of a company during its transformation to the biorefinery, by considering the gradual divestment in pulp and paper activities, while implementing a new biorefinery process. Results show that the tool can enhance decision-making activities by providing a better visualization and better comprehension of supply-chain and cost-related dynamics under different scenarios. Coupled with a scenario analysis, it offers the opportunity to develop a phased implementation strategy that would stabilize profitability during the transformation to the biorefinery. The planning tool was also used to study the management of a product portfolio to mitigate the risk of market volatility. One analysis focused on the exploitation of thermomechanical and deinked pulping flexibility in order to minimize the cost of raw material procurement in different to market conditions. Another analysis examined the impact of feedstock and production flexibility of a fractionation process on sales and profitability. Results show that the procurement and production needed to manufacture the product mix that provides the optimum margins vary significantly. Biorefinery processes can have complex interrelations that make dynamics and trade-offs between manufacturing options not easy to identify and understand. Results thus highlight the relevance of using such planning tools to identify the best opportunities. In a context where sales can be varied to a certain level, results also show that it may be beneficial to pay more for certain types of biomass if they offer a product portfolio mix with higher revenues.

  14. The Canadian Human Rights Act. Employer Guide = Loi canadienne sur les droits de la personne. Guide pour employeurs.

    ERIC Educational Resources Information Center

    Canadian Human Rights Commission, Ottawa (Ontario).

    The purpose of this brochure is to inform employers and their management personnel about the existence, requirements, and effects of the Canadian Human Rights Act. Section 1 is an introduction to the Act. Section 2 focuses on preventive action by employers to eliminate discrimination. Special programs/affirmative action undertaken by employers to…

  15. Phénomènes d'électrisation des matériaux isolants pour transformateurs de puissance

    NASA Astrophysics Data System (ADS)

    Peyraque, L.; Béroual, A.; Boisdon, C.; Buret, F.

    1994-07-01

    In power transformers, the oil flowed through the cooling ducts in coil assembly induces a static charge separation. The study of this static electrification phenomena is presented through a device allowing to investigate the charge separation generated by the rotating motion of a transformer pressboard in oil. This permits to show the influence of various parameters such as velocity, temperature, moisture and processing of oils and pressboards as well as their nature on this electrical charge. We also present another device allowing to classify oils according to their level of charge production. It appears from our results that a correlation exists between the density of these charges and the characteristics of oil such as conductivity, electric strength and water content. Dans les transformateurs de puissance, la circulation d'huile à travers les canaux de refroidissement en fibre cellulosique (carton isolant) est à l'origine d'une séparation de charges. L'étude de ce phénomène d'électrisation statique est présentée, tout d'abord à travers un dispositif permettant d'étudier la séparation de charges créées par le mouvement du carton dans l'huile. Celui-ci a permis de mettre en évidence l'influence de plusieurs paramètres comme la vitesse, la température, l'humidité et le traitement des huiles et cartons ainsi que la nature du carton sur cette charge. Le second dispositif présenté permet de classer les huiles selon leur niveau de création de charges. Une corrélation semble s'établir entre la densité de ces charges et les grandeurs caractéristiques de l'huile telles que la conductivité, la rigidité diélectrique et la teneur en eau.

  16. Mise à jour sur le nouveau vaccin 9-valent pour la prévention du virus du papillome humain

    PubMed Central

    Yang, David Yi; Bracken, Keyna

    2016-01-01

    Résumé Objectif Informer les médecins de famille quant à l’efficacité, à l’innocuité, aux effets sur la santé publique et à la rentabilité du vaccin 9-valent contre le virus du papillome humain (VPH). Qualité des données Des articles pertinents publiés dans PubMed jusqu’en mai 2015 ont été examinés et analysés. La plupart des données citées sont de niveau I (essais randomisés et contrôlés et méta-analyses) ou de niveau II (études transversales, cas-témoins et épidémiologiques). Des rapports et recommandations du gouvernement sont aussi cités en référence. Message principal Le vaccin 9-valent contre le VPH, qui offre une protection contre les types 6, 11, 16, 18, 31, 33, 45, 52 et 58 du VPH, est sûr et efficace et réduira encore plus l’incidence des infections à VPH, de même que les cas de cancer lié au VPH. Il peut également protéger indirectement les personnes non immunisées par l’entremise du phénomène d’immunité collective. Un programme d’immunisation efficace peut prévenir la plupart des cancers du col de l’utérus. Les analyses montrent que la rentabilité du vaccin 9-valent chez les femmes est comparable à celle du vaccin quadrivalent original contre le VPH (qui protège contre les types 6, 11, 16 et 18 du VPH) en usage à l’heure actuelle. Toutefois, il faut investiguer plus en profondeur l’utilité d’immuniser les garçons avec le vaccin 9-valent contre le VPH. Conclusion en plus d’être sûr, le vaccin 9-valent protège mieux contre le VPH que le vaccin quadrivalent. Une analyse coûtefficacité en favorise l’emploi, du moins chez les adolescentes. Ainsi, les médecins devraient recommander le vaccin 9-valent à leurs patients plutôt que le vaccin quadrivalent contre le VPH.

  17. Ajustement du rechargement et des mecanismes de reactivite des reacteurs CANDU pour les cycles de combustible avances

    NASA Astrophysics Data System (ADS)

    St-Aubin, Emmanuel

    This research project main objectives are to set up and apply a methodology that can determine the potential of advanced thorium-based fuel cycles in CANDU reactors and that is able to adjust reactivity devices, in such a way as to maintain their reference efficiency for these new fuels. In order to select these fuel cycles, a large alternative fuel envelope is submitted to several discriminating criteria. A coarse parametric core modeling, that takes into account standard reactivity devices, is first used to highlight candidates presenting the best economical performances and to eliminate non viable options. Then, for the best candidates, the neutronic modeling is optimized before considering reactivity devices adjustment. For every reactivity device managed by the reactor regulating system, innovative generic optimization methods are used to achieve specific objectives for every fuel cycle, all of them being based on the reference natural uranium cycle behavior. Specific optimization objectives are assessed by simulating advanced fuel cycle for specific operating conditions, including : normal on-power refueling period, spurious reactor trip and fueling machine unavailibility. Unlike the generalized perturbative approach proposed in the OPTEX code, we have successfully implemented a multi-step method able to maximize both the energy extracted from the fuel using an equilibrium refueling optimization, and the reactivity devices adequacy. We also propose new reactivity device supercell models that provides accurate reactor databases for a fraction of the computing cost usually needed using a full model with a similar spatial discretization. Our approach is verified by comparing our simulation results with results published in the literature for the reference fuel cycle. The methodology developed identified advanced fuel cycles, containing up to 60%v. thorium, thereby increasing resources utilization by more than 50% and multiplying the fuel average exit burn-up by a factor of 4.4 when compared with the reference cycle. The reactivity devices were also retained after our optimization processes, requiring only minor modifications to the original design. We determined that a 10%v. heavy water doping of the light water within liquid zone controllers could increase the average exit burnup of the reference cycle by almost 1%, without any adverse consequence to the reactor control. This method is validated through its systematic application to numerous different cases. It demonstrates its capability to achieve very different objectives related to reactivity devices requirements, thus it can be now used for other similar studies.

  18. "Ni Pour, Ni Contre" [Neither for Nor Against]: Conflict and Community in the Films of Cedric Klapisch

    ERIC Educational Resources Information Center

    Fallon, Jean M.

    2007-01-01

    Eschewing the making of elitist films, French writer/director Cedric Klapisch strives to appeal to a wide population with his largely humorous yet thought-provoking narratives that look compellingly at the relationship between individuals and community. Three of his films that have received U.S. releases--"Chacun cherche son chat" [When the Cat's…

  19. Modelisation des systemes geothermiques a boucles horizontales pour chauffer les batiments et prevenir la fonte du pergelisol

    NASA Astrophysics Data System (ADS)

    Fontaine, Pier-Olivier

    2011-12-01

    In northern regions, due to climate change, the increase in the annual mean air temperature increases the depth at which the permanently frozen ground (permafrost) is located. This melting causes soil instability and therefore, the instability of the buildings and transport structures above it. These regions are highly dependent on fossil fuels as a large quantity is used to heat buildings and generate electricity. A solution to these problems is presented in this memoir. It involves using a heat exchanger coupled to a horizontal geothermal heat pump for both heating a building and maintaining the integrity of the permafrost beneath it. A new analytical model for horizontal ground heat exchanger based on the finite line source is presented. This model extends to the transient case in the soil and to any desired pipe layout the steady state results for parallel horizontal pipes of Claesson et Dunand (1983). The heat transfer ratio can change along the pipe. The analytical model can not account for the groundwater phase change given the complexity of the phenomenon. When there is no phase change the analytical model is validated by a 3D finite element numerical model. When the phase change is accounted for in the numerical model, for weather data from northern regions, the analytical model still provides good approximations to the ground temperature during the intensive heating season, hence allowing to compute the heat extracted by the ground heat exchanger (GHE). However, summer ground temperature and thaw depth are overestimated by the analytical model, so that the analytical model gives conservative results. A case study using a geoexchange thermal system is presented. It consists in freezing the ground under a building and heat it at the same time. A typical building in Kuujjuaq (northern Canada) is analyzed. The GHE layout follows a spiral pattern characterized globally by 3 parameters : length L, depth D and spacing S. The influence of each parameter on the amount of heat extracted from the ground and on the maximum ground temperature at a control point is assessed. This study shows that the proposed solution is feasible. An impact analysis shows the most important external parameters for the system design. The thermal properties of the frozen ground prove to be decisive parameters. The model, the case study and the impact analysis provide useful GHE design guidelines in cold regions for the double purpose of ground freezing and heat extraction.

  20. When it Rains, It Pours: Drought, Excess Water, and Agricultural Risk Management in the U.S. Corn Belt

    NASA Astrophysics Data System (ADS)

    Baker, J. M.; Anderson, M. C.; Griffis, T. J.; Kustas, W.; Schultz, N. M.

    2012-12-01

    Ever since its inception agriculture has been a risky proposition, with yields subject to losses from insects, diseases, weeds, and weather anomalies. The transition from subsistence farming to production agriculture motivated research that eventually provided tools to combat some of the traditional sources of risk, particularly pests. However, weather-related risk remains resistant to mitigation, except in cases where there has been a fundamental alteration of lands otherwise unsuited for agriculture, e.g. - irrigation of arid lands and drainage of swamps. We have undertaken a multi-faceted analysis of potential avenues to reduce weather-related risk in the central U.S. corn belt, focusing on MN, IA, IL, IN, and OH. Mean annual precipitation has increased across the region over the past 60 years, and mean stream flows have increased as much or more, indicating relatively stable ET. The precipitation increase is consistent with changes predicted by GCMs for the region, while the stable (and even decreasing) regional ET primarily reflects changes in farming, particularly an increase in soybean acreage at the expense of permanent pasture. Unfortunately, the observed increases in precipitation are primarily associated with an increase in spatially and temporally isolated high intensity storms, so transient drought remains a problem. Indeed, analysis of crop insurance indemnities in recent years for the region reveals nearly equal yield losses due to drought and excess water, each totaling roughly $3 billion USD between 2000 and 2011, and jointly accounting for more than two thirds of all payments. County level mapping shows that losses from both causes occur throughout the corn belt, often in the same county in the same year. The ALEXI model, which provides continental-scale estimates of ET on a 10 km grid, was used to map ET anomalies across the region for the same time period. Correspondence between ALEXI output and insurance loss data was reasonably good in drought years, with results indicating that most locations in the corn belt experienced yield losses due to drought 2 to 4 times in the past dozen years. Not surprisingly, ET anomaly maps did not correlate well with loss claims due to excess water. The similar magnitude of insurance claims for both excess and insufficient water suggests that enhancement of landscape water storage (e.g.- wetland restorations, pond construction, aquifer recharge techniques) linked to an expansion of supplemental irrigation, might be a mitigation strategy that could sustainably increase productivity of the region. If done properly, this could also have significant environmental benefits, including decreased sediment and nutrient export and increased wildlife habitat.

  1. Bilan d'erreur pour la correction atmospherique d'images hyperspectrales dans le visible et le proche infrarouge

    NASA Astrophysics Data System (ADS)

    Bergeron, Martin

    Improvements to the predictions of climatic and climatological models depend, in part, on the quality of the modelization of the atmosphere. Its precision, in turn, depends on our theoretical understanding and on our capacity to evaluate the relevant atmospheric parameters. In the past, numerous efforts have been made but very few have dealt with an exhaustive study of the error factors, hence the lack of information on their accuracy. The current trend favouring quantitative over qualitative remote sensing necessitates improvements of our knowledge of the impact of atmospheric effects on image data. This thesis contributes to this goal. To this end, we present a simple yet efficient approach to the estimation of the error budget on the prediction of the apparent at-ground bidirectional reflectance factor (BRF) from the apparent at-sensor BRF. This method is essentially a sensibility analysis. Contributions from the different parameters are decomposed according to their relative importance to the total error. Results show that, in the case of the CASI sensor for the selected sites, the relative error (percentage error on the apparent at ground BRF) is around five percent, with a significant increase to about twenty percent in both the blue and the near-infrared. Sensor calibration appears as the largest source of error, aerosol optical depth being a distant second. The method is then validated according to its accuracy (absolute validation) through the extrapolation to the ground of the apparent at-sensor BRF acquired from multi-altitude imagery. The apparent at-ground BRF obtained is then considered representative of the ground truth and thus constitutes an absolute validation of the method. Results demonstrate the validity of the method to estimate the magnitude of the error on the atmospheric correction.

  2. Initiating Franco-American Studies: A Handbook for Teachers = Manuel du professeur pour introduire les etudes Franco-Americaines.

    ERIC Educational Resources Information Center

    Freeman, Stanley L., Jr.; Pelletier, Raymond J.

    This five-chapter handbook is designed for use by teachers in elementary and secondary schools and adult education. Its purpose is to achieve more widespread awareness and understanding of the Franco-American presence in New England by offering teaching plans and strategies for incorporating materials into the existing humanities curriculum. It…

  3. Utilisation du potentiel de stockage thermique des chauffe-eau electriques pour combler une production variable d'energie renouvelable

    NASA Astrophysics Data System (ADS)

    Prieur, Alexandre

    The electric water heaters have a storage potential that can be exploited to compensate for variations in intermittent power generation such as photovoltaic panels. The power produced by a solar panel can vary by 50% in 90 seconds (NERC). This variability is an obstacle to increasing the amount of renewable energy that can be added to the grids. This thesis proposes to use an electric water heater population to add flexibility to loads and compensate this variability. More specifically, it presents a case of cooperation between water heaters and intermittent photovoltaic production to partially compensate for the intra-hour photovoltaic power variability. The proposed method is based on the calculation of a moving average of past production. This average can be evaluated according to different observation windows or time intervals. At any given time, immediately after the calculation of the moving average, the photovoltaic generation can be represented by the moving average and sudden negative or positive changes in output occurring at this time. In the proposed method, it is assumed that the portion associated with the moving average is normally provided on the local power grid while sudden changes in power are compensated by modulating, up or down, the power of the heating elements at the bottom of electric water heaters. The energy analysis of an annual photovoltaic production from a site shows that when using the concept of moving average with a 30 minutes observation window, water heaters have to offset 19.5% of the annual photovoltaic energy production. A conservative case with 14 kWh per day of energy consumption for heating hot water and with high sudden changes in power levels, occurring less than 0.3% of the minutes of the year, shows that the photovoltaic generation needed to cooperate with 3650 water heaters is 3.1 MW. This would compensate the photovoltaic variations based on an observation window of 30 minutes. This means that 3650 residential houses containing water heater near a 3.1 MW photovoltaic power plant could cooperate, as presented in this thesis, and thus reduce photovoltaic power variability seen on the electrical grid.

  4. Utilisation d'analyse de concepts formels pour la gestion de variabilite d'un logiciel configure dynamiquement

    NASA Astrophysics Data System (ADS)

    Menguy, Theotime

    Because of its critical nature, avionic industry is bound with numerous constraints such as security standards and certifications while having to fulfill the clients' desires for personalization. In this context, variability management is a very important issue for re-engineering projects of avionic softwares. In this thesis, we propose a new approach, based on formal concept analysis and semantic web, to support variability management. The first goal of this research is to identify characteristic behaviors and interactions of configuration variables in a dynamically configured system. To identify such elements, we used formal concept analysis on different levels of abstractions in the system and defined new metrics. Then, we built a classification for the configuration variables and their relations in order to enable a quick identification of a variable's behavior in the system. This classification could help finding a systematic approach to process variables during a re-engineering operation, depending on their category. To have a better understanding of the system, we also studied the shared controls of code between configuration variables. A second objective of this research is to build a knowledge platform to gather the results of all the analysis performed, and to store any additional element relevant in the variability management context, for instance new results helping define re-engineering process for each of the categories. To address this goal, we built a solution based on a semantic web, defining a new ontology, very extensive and enabling to build inferences related to the evolution processes. The approach presented here is, to the best of our knowledge, the first classification of configuration variables of a dynamically configured software and an original use of documentation and variability management techniques using semantic web in the aeronautic field. The analysis performed and the final results show that formal concept analysis is a way to identify specific properties and behaviors and that semantic web is a good solution to store and explore the results. However, the use of formal concept analysis with new boolean relations, such as the link between configuration variables and files, and the definition of new inferences may be a way to draw better conclusions. The use of the same methodology with other systems would enable to validate the approach in other contexts.

  5. Réduction de modèle pour une centrale solaire à capteurs distribués

    NASA Astrophysics Data System (ADS)

    Balbi, J. H.; Balbi, N.; Girolami, G.; Orenga, P.; Riolacci, C.; Durastanti, J. F.

    The aim of this paper is to show that it is in some cases possible to simplify the modeling of some kinds of complex systems. Originally, a theoretical approach was used to derive a model which was complicated and slow. Our goal was to obtain a much simpler and faster model using global experiments instead of local equations. This method proved to be very effective, and the new model was as precise as the theoretical one, but much faster and simpler.

  6. Proprietes structurelles et magnetiques d'alliages de nanoparticules fabriquees par procedes lasers pour des applications biomedicales

    NASA Astrophysics Data System (ADS)

    Boyer, Paul

    The goal of this thesis is to study the magnetization of magnetic nanoparticles with diameters around 10 nm. The main objective is to understand some of the phenomena that alter the magnetization, like oxidation, and to conceive processes to increase its amplitude. We have developed a process of ablation and fragmentation in a solution degassed by a flux of nitrogen or argon to remove the oxygen dissolved naturally in liquids. Doing so, we have observed that the oxide volume was reduced roughly by a factor of 5 while keeping the same laser parameters. The liquid medium can also favour oxidation when it is decomposed by the laser pulse, as seen in water, while in toluene, particles are fixed in a carbon matrix. Nevertheless, the main solvent influence originates from its capacity to stabilise the nanoparticles in solution. While the particles do not change size at room temperature, even though they can collide due to Brownian motion, they will be able to bond and reshape at higher temperature. In liquids, the nanoparticles will be excited upon interaction with the laser beam, yielding a temperature rise that will increase as the fluence rises, i.e. near the focal point. The probability of collision between two hot nanoparticles can be calculated, based on the perikinetic theory from the DLVO model. However, in the absence of surfactants and ionic salts, we show that the electrostatic repulsion can be controlled via the solvent polarity that screens the nanoparticles surface potential, as would be the case for charged ions. As such, solvents with a higher polarity, like methanol, contribute to the lowering of the ionic double layer thickness, increasing the probability of a growth event to occur. In the second step, we have used femtosecond ablation and fragmentation processes in order to synthesize nanoparticle alloys of Fe, Co and Ni in acetone. While keeping the same experimental parameters, we have been able to generate alloys between these metals from the atomic mixture that is generated after multiple fragmentation events. Moreover, these particles had similar diameters and size distributions, allowing the comparison of their magnetic behaviour. Doing so, we observed a behaviour similar to the Slater-Pauling prediction of the magnetization of bulk materials as a function of the number of electrons of type d. However, important differences have also been observed, and the overall behaviour is closer to that of amorphous materials. The transition by zero of the spontaneous magnetization as a function of the number of d electrons occurs at Ni instead of the Ni 40Cu60 alloy. This indicates a loss of 0.6 µB , 35% of the magnetization of bulk Co at 0 K, in strong ferromagnetic materials. These modifications of the magnetization have been attributed to the multiple roles played by the oxide shell formed on the nanoparticles surface. Unlike what is reported in literature, the presence of oxidation not only reduces the magnetization by converting the external atomic layers in an antiferromagnetic material. The nanoparticles’ magnetization can also be improved by creating heterogeneous structures by introducing noble metals like gold into the particles. When the gold concentration becomes higher, the nanoparticles tend to repel the gold toward the surface in order to minimise the internal stress and to increase the particles stability to fragmentation. In this configuration similar to a core-shell structure, we have observed an increase of the core magnetization from 28 to 51 emu/g for an atomic fraction of Co68%Au32%. Gold then acts as an oxygen diffusion barrier and this structure was formed using laser processes that were not selective to the nature of the materials, as long as they tend to remain bonded to atoms of the same element. We have also observed that the magnetization of those hybrids cannot be explained by considering that the system’s magnetization occurs from the sum of the independent responses of each individual phase. We must consider, as for the oxide case, an interface between these metals in which an electron transfer alters the population of up and down spins since the atomic fraction of the core atoms at this juncture cannot be neglect like for macroscopic aggregates. Finally, we have observed that the nanoparticles’ saturation magnetization under nanosecond laser annealing at 200 mW was higher in the heterogeneous structures’ since they are able to limit oxidation as expected. (Abstract shortened by UMI.).

  7. Conception et analyse de combineurs spatiaux de puissance pour des applications d'amplification et de multiplication de frequences

    NASA Astrophysics Data System (ADS)

    Belaid, Mekki

    MMIC devices experience a remarkable development nowadays. They make it possible to obtain unequalled performances compared to vacuum electronic devices. Until approximately 12 GHz, binary networks make it possible to combine in an effective way a great number of devices. Beyond 12 GHz, combining MMIC devices by using a binary network quickly becomes ineffective when the number of devices to be combined increases. The various techniques of spatial power combining allow, in a remarkable way, to overcome this handicap by offering a solution which makes it possible to obtain a very great combining efficiency for a great number of devices. The first solutions which were studied used a topology called the tile tray approach which consisted of a grid of active elements that is positioned perpendicularly to the propagation direction of the incident wave. The amplified signal is emitted on the other side of the grid or in the same side but with a perpendicular polarisation to the incidental signal. The second approach, called tray array, consists in placing the elements in the direction to find incidental wave. This new approach consisted of using a Quasi-TEM propagating mode inside the rectangular waveguide instead of the TE10 mode. To obtain the Quasi-TEM mode, frequency selective surfaces called UC-EBG were used on the two sides of the rectangular waveguide. This technique made it possible to improve considerably the performances of amplifier SPCA making the combined efficiency structure passes from 70% to 85%. The same approach was also used to design a new structure which makes it possible to combine frequency multipliers. The structure consisted of the combination of four MMIC frequency multipliers operating in the frequency band at the input between 11 and 13 GHz and at its output between 22 and 26 GHz. Not only an increase in the output power was observed with a combining efficiency of 70% but suppression of the first and third harmonics were eliminated respectively by at least 70 dBc and 20 dBc without the addition of any filter. Suppression of the harmonics is done naturally thanks to the configuration of the structure. (Abstract shortened by UMI.)

  8. Pour une typologie des anglicismes en francais du Canada (Toward a Typology of Anglicisms in Canadian French).

    ERIC Educational Resources Information Center

    Meney, Lionel

    1994-01-01

    It is argued that anglicisms in Canadian French cover a much broader spectrum than in any European variety of French, with traits of the English language incorporated into spelling, pronunciation, morphology, syntax, lexicon, and phraseology. A typology of these features is proposed, with examples. (Author/MSE)

  9. Un nouveau point de départ pour l'histoire de l'Atlantique central

    NASA Astrophysics Data System (ADS)

    Sahabi, Mohamed; Aslanian, Daniel; Olivet, Jean-Louis

    2004-09-01

    The first oceanic crust in the central Atlantic is usually thought to have a Middle Jurassic age. The new interpretation of the two key parameters, the African homologue of the East Coast Magnetic Anomaly and the situation of the Triassic salt basin of Morocco and Novia Scotia, shows that this age was underestimated by about 20 Ma. In our kinematic reconstruction, the first oceanic crust begins at the Late Sinemurian. This difference in age is crucial for the evolution of those margins and we discuss here its consequences. To cite this article: M. Sahabi et al., C. R. Geoscience 336 (2004).

  10. Alternative to Ph. Eur. pour-plate method for detection of microbial contamination in non-sterile pharmaceutical preparations.

    PubMed

    Palicz, A; Paul, A; Hofmann, A; Denzel, K

    2016-01-01

    The current European Pharmacopoeia (Ph. Eur.) texts for Interferon (IFN)-alfa-2 include a nonspecific photometric protein assay using albumin as calibrator and a highly variable cell-based assay for the potency determination of the protective effects. A request was expressed by the Official Medicines Control Laboratories (OMCLs) for improved methods for the batch control of recombinant interferon alfa-2 bulk and market surveillance testing of finished products, including those formulated with Human Serum Albumin (HSA). A HPLC method was developed at the Medical Products Agency (MPA, Sweden) for the testing of IFN-alfa-2 products. An initial collaborative study run under the Biological Standardisation Programme (BSP; study code BSP039) revealed the need for minor changes to improve linearity of the calibration curves, assay reproducibility and robustness. The goal of the collaborative study, coded BSP071, was to transfer and further validate this improved HPLC method. Ten laboratories participated in the study. Four marketed IFN-alfa-2 preparations (one containing HSA) together with the Ph. Eur. Chemical Reference Substance (CRS) for IFN-alfa-2a and IFN-alfa-2b, and in-house reference standards from two manufacturers were used for the quantitative assay. The modified method was successfully transferred to all laboratories despite local variation in equipment. The resolution between the main and the oxidised forms of IFN-alfa-2 was improved compared to the results from the BSP039 study. The improved method even allowed partial resolution of an extra peak after the principal peak. Symmetry of the main IFN peak was acceptable for all samples in all laboratories. Calibration curves established with the Ph. Eur. IFN-alfa-2a and IFN-alfa-2b CRSs showed excellent linearity with intercepts close to the origin and coefficients of determination greater than 0.9995. Assay repeatability, intermediate precision and reproducibility varied with the tested sample within acceptable ranges. Test accuracy estimated by comparing the values obtained by the participants to the declared contents determined by the manufacturers was good despite the absence of a common reference preparation. In conclusion, the present study showed that the new method is suitable, reproducible and transferable. Proposals for the revision of Ph. Eur. texts are presented. PMID:27506140

  11. Conception des parametres des dupes auxiliaires pour ameliorer les performances electriques des isolateurs de poste dans des conditions de givrage

    NASA Astrophysics Data System (ADS)

    Ale-Emran, Sayyed Mahdi

    The optimized design of outdoor insulators that consider heavy icing and pollution conditions is a significant concern for the reliability of power networks. Based on field observations, the probability of flashover of EHV post insulators is higher than line insulators under the same heavy icing conditions. The flashover along the insulators is caused mainly by the presence of a water film on the ice surfaces (melting period) and partial arcs in ice-free zones (air gaps). One of the mitigation options is the use of booster sheds (BSs) to create air gaps along the iced insulator. A booster shed (BS) is a flexible c-shape device made of high-quality insulating materials. Since BSs are easy to use, they seem to be simpler alternatives to upgrading insulators to those designed for cold climate regions. Despite the promising results of BS applications, still an important work must be achieved to propose optimized design of BS configurations. This project aims to provide a generic design approach to the use of BSs by optimizing their main parameters (number, diameter, inclination angle, position, and permittivity) on post insulators under heavy icing conditions. This approach is based on analyzing previous BS tests in CEGELE, an improved hypothesis of BS effects, numerical analysis using commercial software (e.g. Comsol Multiphysics(TM), Matlab, and Minitab), geometric modeling of ice-covered post insulator with BSs, and finally experimental validation tests. The improved hypothesis states that the major effect of BSs is the creation of air gaps and their minor effect is the increase in dry arcing distance. Moreover, among total length of the air gaps, dry arcing distance, and total ice-free leakage distance (IFLDtot), the IFLDtot is a good indicator to quantify the BS effects on standard post insulators. Simulation analyses of BS configurations during the melting period demonstrate that the optimized relative permittivity of BS is an arbitrary value in its feasible variation range (2-15). The proper positions of BSs close to the HV electrode should be determined based on the probability of electrical breakdown. In contrast, the positions close to the ground electrode are determined based on ice-bridging effect. The geometric model and Taguchi method analysis show that the optimized value of BS inclination angle is equal to the upper shed angle of the insulator. Also, it indicates that generally the maximum feasible values for diameter and number of BSs are the best options. The feasibility in this regard, depends mainly on the minimum required distances between BSs as well as the mechanical forces of heavy ice and strong wind that may deform BSs. PVC sheet was deemed an effective solution for fabricating BS prototypes to perform the final validation tests. The experimental tests completely confirmed the improved hypothesis, the effectiveness of the geometric model, and the simulation analysis.

  12. Generation de chemins de couverture pour des operations automatisees de controle non destructif appliquees dans l'industrie aerospatiale

    NASA Astrophysics Data System (ADS)

    Olivieri, Pierre

    Non destructive testing (NDT) plays an important role in the aerospace industry during the fabrication and maintenance of the structures built and is used, among other useful applications, to detect flaws such as cracks at an early stage. However, NDT techniques are still mainly done manually, especially on complex aeronautical structures, which then results in several drawbacks. In addition to be difficult and time-consuming, reliability and repeatability of inspection results are likely to be affected, since they rely on each operator's experience and dexterity. The present thesis is part of a larger project (MANU-418) of the Consortium for Research and Innovation in Aerospace in Quebec (CRIAQ). In this project, it has been proposed to develop a system using a 6-DOF manipulator arm to automate three particular NDT techniques often needed in the aerospace industry: eddy current testing (ECT), fluorescent penetrant inspection (FPI), and infrared thermography (IRT). The main objective of the MANU-418 project is to demonstrate the efficiency of the developed system and provide inspection results of surface and near surface flaws (cracks usually) at least as reliably and repeatably as inspection results from a human operator. One specific objective stemming from the main objective of the project is to develop a methodology and a software tool to generate covering paths adapted for the three aforementioned NDT techniques to inspect the complex surfaces of aerospace structures. The present thesis aims at reaching this specific objective. At first, geometrical and topological properties of the surfaces considered in this project are defined (flat surfaces, round and straight edges, cylindrical or near cylindrical surfaces, holes). It is also assumed that the 3D model of the surface to inspect is known in advance. Moreover, it has been decided within the framework of the MANU-418 project to give priority to the automation of ECT compared with the other techniques (FPI and IRT). As a result, the methodology developed to generate inspection paths is more closely focused on path constraints relative to the manual operations of ECT using a differential eddy current probe (named here EC probe), but it is developed to be flexible enough to be used with the other techniques as well. Common inspection paths for ECT are usually defined by a sweeping motion using a zigzag pattern with the EC probe in mild contact with the inspected surface. Moreover, the main axis of the probe must keep a normal orientation with the surface, and the alignment of its two coils must always be oriented along the direction of its motion. A first methodology is then proposed to generate covering paths on the whole surface of interest while meeting all EC probe motion constraints. First, the surface is meshed with triangular facets, and then it is subdivided into several patches such that their geometry and topology are simpler than the whole surface. Paths are then generated on each patch by intersecting their facets with offset section planes defined along a sweeping direction. Furthermore, another methodology is developed to generate paths around an indication (namely a small area where the presence of a flaw is suspected) whose position and orientation are assumed to be known a priori.. Then, a software tool with a graphical user interface has been developed in the MATLAB environment to generate inspection paths based on these methodologies. A set of path parameters can be changed by the user to get desired paths (distance between passes, sweep direction, etc.). Once paths are computed, an ordered list of coordinates (positions and orientations) of the tool is exported in an EXCEL spreadsheet so that it could be used with a real robot. In this research, these data are then used to perform simulations of trajectories (path described as a function of the time) with a MotoMan robot (model SV3XL) using the MotoSim software. After validation of these trajectories in this software (absence of collisions, positions are all reachable, etc.), they are finally converted into instructions for the real MotoMan robot to proceed with experimental tests. These first simulations and experimentations on a MotoMan robot of the generated paths have given results close to the expected inspection trajectories used manually in the NDT techniques considered, especially for the ECT technique. Nevertheless, it is strongly recommended to validate this path generation method with more experimental tests. For instance, a "test" tool could be manufactured to measure errors of position and orientation of this tool with respect to expected trajectories on a typical complex aeronautical structure. (Abstract shortened by UMI.).

  13. Bienvenue aus Etats-Unis. Guide Pour Refugies. (Welcome to the United States. A Guidebook for Refugees).

    ERIC Educational Resources Information Center

    Center for Applied Linguistics, Washington, DC. Refugee Service Center.

    This guidebook provides French-speaking refugees being resettled in the United States with general information about what they will encounter and the services they can receive in their first months in the country. The book is distributed to overseas processing agencies, refugees overseas who have been approved for U.S. admission, and service…

  14. Biopuces pour le traitement de cellules vivantes : micromanipulation des cellules par voie électrique ou microfluidique

    NASA Astrophysics Data System (ADS)

    Le Pioufle, Bruno; Frénéa, Marie; Tixier, Agnès

    2004-06-01

    After a brief overview of the state of the art in the domain of cell biochips, and more particularly, the usual methods for cell placement and characterization on a chip, our research on highly parallelized cell placement on a chip is presented. Single cell arraying methods, using dielectrophoresis effects, or microfluidic effects produced by bulk micromachined sub-micrometric capillaries are compared. Target applications of such cell biochips cover the domain of gene transfer on a large population of cells, parallelized cell sorting, or drug high-throughput screening on living cells. To cite this article: B. Le Pioufle et al., C. R. Physique 5 (2004).

  15. Les mousses adaptatives pour l'amelioration de l'absorption acoustique: Modelisation, mise en oeuvre, mecanismes de controle

    NASA Astrophysics Data System (ADS)

    Leroy, Pierre

    The objective of this thesis is to conduct a thorough numerical and experimental analysis of the smart foam concept, in order to highlight the physical mechanisms and the technological limitations for the control of acoustic absorption. A smart foam is made of an absorbing material with an embedded actuator able to complete the lack of effectiveness of this material in the low frequencies (<500Hz). In this study, the absorbing material is a melamine foam and the actuator is a piezoelectric film of PVDF. A 3D finite element model coupling poroelastic, acoustic, elastic and piezoelectric fields is proposed. The model uses volume and surface quadratic elements. The improved formulation (u,p) is used. An orthotropic porous element is proposed. The power balance in the porous media is established. This model is a powerful and general tool allowing the modeling of all hybrid configurations using poroelastic and piezoelectric fields. Three smart foams prototypes have been built with the aim of validating the numerical model and setting up experimental active control. The comparison of numerical calculations and experimental measurements shows the validity of the model for passive aspects, transducer behaviors and also for control configuration. The active control of acoustic absorption is carried out in normal incidence with the assumption of plane wave in the frequency range [0-1500Hz]. The criterion of minimization is the reflected pressure measured by an unidirectional microphone. Three control cases were tested: off line control with a sum of pure tones, adaptive control with the nFX-LMS algorithm for a pure tone and for a random broad band noise. The results reveal the possibility of absorbing a pressure of 1.Pa at 1.00Hz with 100V and a broad band noise of 94dB with a hundred Vrms starting from 250Hz. These results have been obtained with a mean foam thickness of 4cm. The control ability of the prototypes is directly connected to the acoustic flow. An important limitation for the broad band control comes from the high distortion level through the system in the low and high frequency range (<500Hz, > 1500Hz). The use of the numerical model, supplemented by an analytical study made it possible to clarify the action mode and the dissipation mechanisms in smart foams. The PVDF moves with the same phase and amplitude of the residual incidental pressure which is not dissipated in the foam. Viscous effect dissipation is then very weak in the low frequencies and becomes more important in the high frequencies. The wave which was not been dissipated in the porous material is transmitted by the PVDF in the back cavity. The outlooks of this study are on the one hand, the improvement of the model and the prototypes and on the other hand, the widening of the field of research to the control of the acoustic transmission and the acoustic radiation of surfaces. The model could be improved by integrating viscoelastic elements able to account for the behavior of the adhesive layer between the PVDF and foam. A modelisation of electro-elastomers materials would also have to be implemented in the code. This new type of actuator could make it possible to exceed the PVDF displacement limitations. Finally it would be interesting for the industrial integration prospects to seek configurations able to maximize acoustic absorption and to limit the transmission and the radiation of surfaces at the same time.

  16. Pouring salt on a wound: Pseudomonas aeruginosa virulence factors alter Na+ and Cl- flux in the lung.

    PubMed

    Ballok, Alicia E; O'Toole, George A

    2013-09-01

    Pseudomonas aeruginosa is a ubiquitous opportunistic pathogen with multiple niches in the human body, including the lung. P. aeruginosa infections are particularly damaging or fatal for patients with ventilator-associated pneumonia, chronic obstructive pulmonary disease, and cystic fibrosis (CF). To establish an infection, P. aeruginosa relies on a suite of virulence factors, including lipopolysaccharide, phospholipases, exoproteases, phenazines, outer membrane vesicles, type III secreted effectors, flagella, and pili. These factors not only damage the epithelial cell lining but also induce changes in cell physiology and function such as cell shape, membrane permeability, and protein synthesis. While such virulence factors are important in initial infection, many become dysregulated or nonfunctional during the course of chronic infection. Recent work on the virulence factors alkaline protease (AprA) and CF transmembrane conductance regulator inhibitory factor (Cif) show that P. aeruginosa also perturbs epithelial ion transport and osmosis, which may be important for the long-term survival of this microbe in the lung. Here we discuss the literature regarding host physiology-altering virulence factors with a focus on Cif and AprA and their potential roles in chronic infection and immune evasion. PMID:23836869

  17. Le protée est-il équipé pour le magnétotactisme ?

    NASA Astrophysics Data System (ADS)

    Bouquerel, Hélène; Valet, Jean-Pierre

    2005-07-01

    It was suggested that the proteus blind cave salamander can sense the geomagnetic field using magnetic crystals (like magnetite). We attempted to check this hypothesis by measuring the magnetization and the magnetic mineralogy of proteus from the Moulis CNRS underground laboratory. The abdomen and the rear legs of the animals were the unique body parts that revealed a detectable saturation magnetization in the order of 10 -9 A m 2. Because this magnetization was carried by magnetite crystals that have the same magnetic properties as the soil sampled in the cave, it is likely that they were ingested by the animals. Thus these experiments did not detect any crystal that would be responsible for magnetotactism. These results are in contrast with those published for the newt [J. Brassart, J.L. Kirschvink, J.B. Phillips, S.C. Borland, Ferromagnetic material in the eastern red-spotted newt, J. Exp. Biol. 202 (1999) 3155]. However the cryogenic magnetometers do not allow us to detect very small amounts of monodomain grains. This prevents us from any definite conclusion until the construction of a very sensitive cryogenic gradiometer. To cite this article: H. Bouquerel, J.-P. Valet, C. R. Geoscience 337 (2005).

  18. Simulation d'un systeme de stockage saisonnier de glace pour la climatisation d'un batiment commercial ou institutionnel

    NASA Astrophysics Data System (ADS)

    Giraldo, Raul Alberto

    The principal goal of this study was to evaluate, using numerical simulation, the feasibility of an air conditioning system, supported by a seasonal ice storage system, installed in a commercial or institutional building. In this regard, the effects of changing several elements around the design of two possible scenarios were modeled in TRNSYS using Matlab® as a programming tool. In the first scenario, the air demanded inside the building passes directly through the ice storage system. In a second scenario, a closed loop pipe full of glycol transports the heat between the ice reservoir and an air cooling coil. First of all, the literature review shows some studies and earlier relevant applications, as well as different solving methods for moving boundary problems in a biphasic medium (waterice). Next, the heat load profile for a typical institutional building in Montreal is determined as a reference point using EE4 and three different methods of solving the boundary motion problem are compared for both, ice training and ice melting. Subsequently, the design parameters are presented for each scenario. This is followed by a description of the programming codes in Matlab® and the components that have been implemented in TRNSYS. Finally, the results involving the heat exchanged and the waterice boundary movements, among others, are collected for one year and for three years. The simulations of both scenarios have also included the experimental variation of some parameters such as the construction area for the ice reservoir, the duration of the ice melting period and other related physical variables. A final analysis of results was followed by an economic study, which considered the changes in initial investment and the potential energy savings for each scenario, compared with a traditional air conditioning unit. This showed that, although research is still needed on many improvements in the design of scenarios and whether its application is limited by several macroeconomic factors, a seasonal ice storage system is an appealing option in energy efficiency terms and it could potentially be, technically and ecologically, a good way to obtain energy savings.

  19. Amelioration de l'adhesion de revetements organiques deposes par plasma froid sur polymeres pour applications biomedicales

    NASA Astrophysics Data System (ADS)

    Sbai, Marouan

    Plasma surface modification is commonly used in biomedical field, for example to enhance cell adhesion and growth surrounding the stent covers without affecting its bulk properties. Plasma polymer (PP) deposition used to create thin films rich in functional groups, e.g. primary amines, known to enhance the cellular response and allow grafting of biomolecules especially on stent grafts. Thin film adhesion to stent polymeric cover should be considered especially as they will evolve in a biological environment. The aim of this project is to evaluate the adhesion of PP on polytetrafluoroethylene (PTFE) and polyethyleneterephthalate (PET). Thereafter, an ammonia plasma treatment on PTFE is performed prior to deposition of PP to optimize the PP/PTFE adhesion. PP studied here (referred to as "LP") is prepared from a mixture of ethylene (C2H4) and ammonia (NH3). It is deposited on two supports, PET and PTFE. The interfacial adhesion between the LP coating and the substrate was evaluated by "Peel-test 180 °" according to ASTM F1842. Staining of the surface after peel test followed by an image analysis was performed to determine the percentage of removed coating. Adhesion optimization is done by varying operating plasma parameters such as power, pressure and pretreatment time. Chemical analyses and wettability of LP and pretreated surfaces in dry and wet conditions are characterized by XPS and contact angle measurements, respectively. The adhesion of LP/PET was excellent in a dry environment (<1%), but lower under wet conditions (4+/-6% and 44+/-7% as minimum and maximum values at 5min and 60min of immersion in deionized water, respectively). However, 56% to 75% of the LP is removed from virgin PTFE in a dry and wet environment, respectively; percentages can be substantially reduced by plasma pretreatment (0% and 8+/-3% in air and 30min in deionized water). Almost no delamination was observed with NH3 plasma pretreatment at 15s, 100 mTorr and 50W. N2 plasma pretreatment, for comparison, proves much less effective. The LP/PTFE adhesion is considerably improved by plasma pretreatment compared to untreated samples. The chemical LP composition and the cell growth on LP/pretreated PTFE are not significantly affected by this pretreatment. Further investigations are required to explain the LP/PET low adhesion in wet conditions.

  20. Conception de couches minces tribologiques pour augmenter la resistance a l'erosion par impacts de particules

    NASA Astrophysics Data System (ADS)

    Hassani, Salim

    Solid particle erosion (SPE) is a serious problem in gas turbines, pumps, heat exchangers and piping systems in aircrafts and other applications. Sand and dust ingested by gas turbine engines may cause major damage to compressor gas path components, leading to severe performance degradation, excessive wear, increased maintenance and eventually premature failure of the engines. For the compressor section of aerospace gas turbine engines, in addition to the complex filtration systems used to screen the eroding particles, tribological coatings, such as TiN, Ti/TiN, CrN and TiAlN are used as protective layers of the base titanium alloy (Ti-6Al-4V) or stainless steels (17-4PH and 410) materials (substrates) against erosive wear. Such coatings can extend the service life of the components, but their performance still remains insufficient due to the complexity of failure mechanisms occurring upon SPE. Therefore, aerospace industry seeks to develop high performance coatings for the protection against erosion by solid particles. However, with many new materials used and tested for different applications and operation under different conditions, conducting experiments for each one of them is becoming increasingly difficult. Presently, coating selection criteria to prevent damage caused by erosion are based on trial and error experiments instead of prior design of coating's architecture and properties to maximize erosion resistance. The present work focuses on the use of advanced finite element (FE) methods to design erosion resistant (ER) coatings. It contributes a new methodology based on the analysis of transient stresses generated by a single impact event. Identification of coating architectures in which such stresses are minimized and crack propagation suppressed, allows one to predict and possibly minimize the erosion rate. Erosion mechanisms and governing erosion parameters are investigated to predict the coating behavior in simulated erosion conditions. The calculation variables include impact velocity (in the range of 50--300 m/s), particle size and the mechanical properties of both the target and the impacting particle. Specifically, we investigate the impact response of coatings fabricated by physical vapor deposition (PVD) and plasma enhanced chemical vapor deposition (PECVD). This includes single and multilayer TiN and nanocomposite nc-TiN/a-SiN1.3 and nc-TiCN/a-SiCN systems on titanium alloy and stainless steel substrates. In particular, we correlate the thickness and the coating macroscopic properties, such as hardness, Young's modulus, and toughness with the erosion. The calculations confirmed earlier findings that for a single layer coating, a combination of low modulus and a high thickness lead to local stress reduction and hence possible erosion resistance enhancement. The FE simulations have further shown that a tensile stress exceeding a critical stress sigmacrit = 3.95 GPa can be easily produced by a single particle impact. For each combination of particle velocity and size, a map of tensile stresses in the TiN coating, corresponding to the predicted erosion performance, was produced. The FE model has then been extended to multilayer coating systems containing superhard nanocomposite materials. These coatings configurations, when combined with tailored mechanical properties have shown to provide an improvement of the performance over comparable single layer configurations. The development of high performance erosion-resistant coatings also requires understanding of stress propagation upon particle impact. In the second part of this work, we apply a finite element methodology to enhance and optimize the resistance of protective coatings to erosion by solid particles with appropriate stress management. A controlled distribution of the initial residual stress in the coating was used to counteract impact stress, while a Young's modulus distribution was applied to optimize impact energy spreading throughout the coating system. Considering both tensile stress reduction and energy absorption, a multi-layer configuration with specific Young's modulus and residual stress distributions along the coating depth is suggested as an optimal coating architecture. In the third part of this work, we propose practical semi-empirical and numerical predictive methods to determine erosion resistance of tribological coatings. The study presents data obtained by FE calculations that can be compared with those obtained by classical theories developed for the erosion of materials. The simulation-based approach allows one to express the functional dependence of erosion on the coating properties, and to quantitatively predict the erosion rate. We determined a proportionality coefficient for a wide range of hard coatings. This coefficient was then used, in combination with the semi-empirical expression derived from FE simulations, to determine the erosion rate of different coatings. The existing erosion theories tend to emphasize hardness, H, and Young's modulus, E, as the main parameters defining erosion resistance. In this context, we specifically focus here on the role of the H/E and H3/E 2 ratios. We demonstrate that the latter characteristics allow one to rank coatings with respect to their erosion performance. Target values for these two ratios were determined for an optimal erosion resistance. We demonstrate that the FE design of the coating architecture, combined with the tailored mechanical properties of individual components of the coating systems, opens new opportunities as a predictive tool for high performance erosion coatings. The present thesis also includes a complementary experimental study of a new kind of ER coatings. We modify the surface profile of hard coatings such as diamond like carbon (DLC) and chrome silicon nitride CrSiN in attempt to correlate the surface characteristics to the functional performance. A specific surface texture (or pattern), designed to enhance erosion resistance, was obtained using a simple and cost effective method consisting of a masking operation, followed by conventional film fabrication techniques PVD or PECVD. Micro-patterned coatings (MPC) possessing specific 3D profiles were produced. In addition to a high potential for several tribological applications, MPC allowed to provide erosion resistance enhancement by a factor of 30 compared to the non-coated stainless steel and of 3--5 times compared to that of the same coating without micro pattern.

  1. Guide documentaire pour en savoir plus sur l'informatique (A Documentary Guide to Further Knowledge of Computer Science).

    ERIC Educational Resources Information Center

    Achard-Bayle, Guy

    1985-01-01

    Presents a listing of textbooks, computer program guides, articles, opinion papers, histories, reference works, databases, reviews, bibliographies, organizations, and other information sources concerning computer applications. (MSE)

  2. Etude de solutions pour la mise en oeuvre d'une antenne a reflecteur bi-grille en polarisation circulaire

    NASA Astrophysics Data System (ADS)

    Joyal, Marc-Andre

    Dual-gridded reflector (DGR) antennas are widely used on satellites. They consist of a cascade of two parabolic grids operating in orthogonal linear polarizations, each one having its own feed. Therefore, DGRs are actually two antennas in one structure, so they use less space on the satellite. Moreover, they provide excellent isolation between adjacent coverage areas. The disadvantage with these DGRs is that they work only in linear polarization (vertical and horizontal). In this thesis, two different solutions to design a circularly polarized (right and left hand circular polarizations) DGR are explored. The first one consists in the use of circular polarizers that are fixed on a conventional DGR. Those polarizers are surfaces that make the conversion between linear and circular polarizations. The other solution uses circular polarization selective surfaces (CPSSs) as reflectors on the DGR instead of the orthogonal grids. These CPSSs are structures that are transparent to one sense of circular polarization (say right hand circular polarization for instance), but that reflect the other sense (left hand circular polarization). The major part of this work is based on the first solution. A new circular polarizer design method is proposed. It allows a greater flexibility in the polarizer design than existing designs. The proposed technique is also modified in order to implement polarizers optimized for an oblique incidence, which is required for DGR applications. The second solution using CPSSs is only briefly explored. A new type of CPSS, implemented with a cascade of circular and linear polarizers, is proposed. This cascade CPSS has shown a broader bandwidth than those obtained with the resonant structures known so far. Also, the limitations of CPSSs are identified as to their use on DGRs. Finally, as a proof of concept, two simple prototypes of circularly polarized DGRs are presented. The first design is implemented with a circular polarizer and a metallic grid attached to a small reflector. The second prototype is similar, but the planar grid is replaced by a reflectarray that plays the same role, but increases the gain in the direction of the main beam. The satellite industry requirements between 18-20 GHz are respected with this latter implementation, but only for a very low variation in the elevation angle.

  3. De la television pour comprendre les Francais: cours experimental (Understanding the French Through a Study of Television: An Experimental Course).

    ERIC Educational Resources Information Center

    Mariet, Francois

    1986-01-01

    A college French civilization course based on the important role of television in French contemporary culture, as formative of cultural habits, and on its similar importance to contemporary American students is described. (MSE)

  4. Reflexions sur un Cours de Langue pour Debutants (Refections on a Language Course for Beginners). Melanges Pedagogiques, 1972.

    ERIC Educational Resources Information Center

    Esch, E.; Cembalo, M.

    This article attempts an analysis of the problems involved in creating a course in English as a second language for adult beginners. Various learning theories and linguistic theories are discussed, which should be taken into consideration in choosing a teaching method. In addition, care must be taken to distinguish among the four language skills…

  5. Le déficit immunitaire humoral: mieux le connaître pour mieux le prendre en charge

    PubMed Central

    El Bakkouri, Jalila; Aadam, Zahra; Ailal, Fatima; Alj, Hanane Salih; Bousfiha, Ahmed Aziz

    2014-01-01

    Les déficits immunitaires humoraux (DIH) sont des maladies hétérogènes allant des formes asymptomatiques rencontrés lors des déficits sélectifs en immunoglobulines A (IgA) et en sous-classes d'IgG aux formes graves des agammaglobulinémies congénitales. Les patients atteints de DIH présentent souvent des infections ORL ou des voies respiratoires récidivantes ou sévères. Ces patients peuvent présenter un certain nombre de complications non infectieuses, telles que des manifestations auto-immunes et des entéropathies, qui pourraient être le seul symptôme clinique révélateur. Les formes sévères des DIH sont facilement diagnostiquées grâce au dosage des IgG totaux, des IgA et des IgM. La thérapie substitutive par les immunoglobulines reste le traitement de choix chez ces patients. PMID:25489366

  6. Analyse du potentiel de la radiometrie infrarouge thermique pour la caracterisation des nuages de glace en Arctique

    NASA Astrophysics Data System (ADS)

    Blanchard, Yann

    An important goal, within the context of improving climate change modelling, is to enhance our understanding of aerosols and their radiative effects (notably their indirect impact as cloud condensation nuclei). The cloud optical depth (COD) and average ice particle size of thin ice clouds (TICs) are two key parameters whose variations could strongly influence radiative effects and climate in the Arctic environment. Our objective was to assess the potential of using multi-band thermal radiance measurements of zenith sky radiance for retrieving COD and effective particle diameter (Deff) of TICs in the Arctic. We analyzed and quantified the sensitivity of thermal radiance on many parameters, such as COD, Deff, water vapor content, cloud bottom altitude and thickness, size distribution and shape. Using the sensitivity of IRT to COD and Deff, the developed retrieval technique is validated in comparison with retrievals from LIDAR and RADAR. Retrievals were applied to ground-based thermal infrared data acquired for 100 TICs at the high-Arctic PEARL observatory in Eureka, Nunavut, Canada and were validated using AHSRL LIDAR and MMCR RADAR data. The results of the retrieval method were used to successfully extract COD up to values of 3 and to separate TICs into two types : TIC1 characterized by small crystals (Deff < 30 mum) and TIC2 by large ice crystals (Deff > 30 mum, up to 300 mum). Inversions were performed across two polar winters. At the end of this research, we proposed different alternatives to apply our methodology in the Arctic. Keywords : Remote sensing ; ice clouds ; thermal infrared multi-band radiometry ; Arctic.

  7. Critère de fatigue polycyclique pour des matériaux anisotropes : application aux monocristaux

    NASA Astrophysics Data System (ADS)

    Cano, Florian; Constantinescu, Andrei; Maitournam, Habibou

    2004-02-01

    The high-cycle fatigue criteria based on a macroscopic-mesoscopic scale interpretation, initiated by Dang Van, were used essentially for polycrystalline materials. In the existing criteria the material isotropy at both mesoscopic and macroscopic scales plays a key role. The purpose of this paper is to revisit the macroscopic to mesoscopic fatigue approach taking into account the material anisotropy and some results obtained by Bui. The possible applications are some anisotropic steels or monocrystalline structures such as stitanium turbine blades. To cite this article: F. Cano et al., C. R. Mecanique 332 (2004).

  8. Developpement et implementation d'une methode pour resoudre les equations de la couche limite laminaire et turbulente

    NASA Astrophysics Data System (ADS)

    Leuca, Maxim

    CFD (Computational Fluid Dynamics) is a computational tool for studying flow in science and technology. The Aerospace Industry uses increasingly the CFD modeling and design phase of the aircraft, so the precision with which phenomena are simulated boundary layer is very important. The research efforts are focused on optimizing the aerodynamic performance of airfoils to predict the drag and delay the laminar-turbulent transition. CFD codes must be fast and efficient to model complex geometries for aerodynamic flows. The resolution of the boundary layer equations requires a large amount of computing resources for viscous flows. CFD codes are commonly used to simulate aerodynamic flows, require normal meshes to the wall, extremely fine, and, by consequence, the calculations are very expensive. . This thesis proposes a new approach to solve the equations of boundary layer for laminar and turbulent flows using an approach based on the finite difference method. Integrated into a code of panels, this concept allows to solve airfoils avoiding the use of iterative algorithms, usually computing time and often involving convergence problems. The main advantages of panels methods are their simplicity and ability to obtain, with minimal computational effort, solutions in complex flow conditions for relatively complicated configurations. To verify and validate the developed program, experimental data are used as references when available. Xfoil code is used to obtain data as a pseudo references. Pseudo-reference, as in the absence of experimental data, we cannot really compare two software together. Xfoil is a program that has proven to be accurate and inexpensive computing resources. Developed by Drela (1985), this program uses the method with two integral to design and analyze profiles of wings at low speed (Drela et Youngren, 2014), (Drela, 2003). NACA 0012, NACA 4412, and ATR-42 airfoils have been used for this study. For the airfoils NACA 0012 and NACA 4412 the calculations are made using the Mach number M =0.17 and Reynolds number Re = 6x10 6 conditions for which we have experimental results. For the airfoil ATR-42 the calculations are made using the Mach number M =0.1 and Reynolds number Re=536450 as it was analysed in LARCASE's Price-Paidoussis wind tunnel. Keywords: boundary layer, direct method, displacement thickness, finite differences, Xfoil code.

  9. Nouvelles techniques pratiques pour la modelisation du comportement dynamique des systèmes eau-structure

    NASA Astrophysics Data System (ADS)

    Miquel, Benjamin

    The dynamic or seismic behavior of hydraulic structures is, as for conventional structures, essential to assure protection of human lives. These types of analyses also aim at limiting structural damage caused by an earthquake to prevent rupture or collapse of the structure. The particularity of these hydraulic structures is that not only the internal displacements are caused by the earthquake, but also by the hydrodynamic loads resulting from fluid-structure interaction. This thesis reviews the existing complex and simplified methods to perform such dynamic analysis for hydraulic structures. For the complex existing methods, attention is placed on the difficulties arising from their use. Particularly, interest is given in this work on the use of transmitting boundary conditions to simulate the semi infinity of reservoirs. A procedure has been developed to estimate the error that these boundary conditions can introduce in finite element dynamic analysis. Depending on their formulation and location, we showed that they can considerably affect the response of such fluid-structure systems. For practical engineering applications, simplified procedures are still needed to evaluate the dynamic behavior of structures in contact with water. A review of the existing simplified procedures showed that these methods are based on numerous simplifications that can affect the prediction of the dynamic behavior of such systems. One of the main objectives of this thesis has been to develop new simplified methods that are more accurate than those existing. First, a new spectral analysis method has been proposed. Expressions for the fundamental frequency of fluid-structure systems, key parameter of spectral analysis, have been developed. We show that this new technique can easily be implemented in a spreadsheet or program, and that its calculation time is near instantaneous. When compared to more complex analytical or numerical method, this new procedure yields excellent prediction of the dynamic behavior of fluid-structure systems. Spectral analyses ignore the transient and oscillatory nature of vibrations. When such dynamic analyses show that some areas of the studied structure undergo excessive stresses, time history analyses allow a better estimate of the extent of these zones as well as a time notion of these excessive stresses. Furthermore, the existing spectral analyses methods for fluid-structure systems account only for the static effect of higher modes. Thought this can generally be sufficient for dams, for flexible structures the dynamic effect of these modes should be accounted for. New methods have been developed for fluid-structure systems to account for these observations as well as the flexibility of foundations. A first method was developed to study structures in contact with one or two finite or infinite water domains. This new technique includes flexibility of structures and foundations as well as the dynamic effect of higher vibration modes and variations of the levels of the water domains. Extension of this method was performed to study beam structures in contact with fluids. These new developments have also allowed extending existing analytical formulations of the dynamic properties of a dry beam to a new formulation that includes effect of fluid-structure interaction. The method yields a very good estimate of the dynamic behavior of beam-fluid systems or beam like structures in contact with fluid. Finally, a Modified Accelerogram Method (MAM) has been developed to modify the design earthquake into a new accelerogram that directly accounts for the effect of fluid-structure interaction. This new accelerogram can therefore be applied directly to the dry structure (i.e. without water) in order to calculate the dynamic response of the fluid-structure system. This original technique can include numerous parameters that influence the dynamic response of such systems and allows to treat analytically the fluid-structure interaction while keeping the advantages of finite element modeling.

  10. Fabrication et analyse de revetements de nitrure de silicium deposes par plasma pour de nouvelles applications optiques

    NASA Astrophysics Data System (ADS)

    Vernhes, Richard

    In the present thesis, innovative methods and strategies are proposed for the plasma-enhanced chemical vapor deposition (PECVD) of thin films in order to tune their physical properties (e.g. optical constants, optical gap, etc.), by relying on the control and understanding of plasma characteristics and plasma-surface interactions rather than on the traditional variation of the gas mixture composition. The following paragraphs summarize the applied methodology and the main results, presented in the form of three articles at the core of this thesis, plus an additional chapter devoted to sensor fabrication and testing. (1) In the first article, we propose a new method of fabricating a-SiNx:H alloys by pulsing the radiofrequency (RF) signal during the PECVD process. Spectroscopic ellipsometric analysis in the UV-VIS-NIR and FIR ranges, atomic force microscopy, and elastic recoil detection reveal strong variations in the optical constants (1.88 ≤ n ≤ 2.75, 10-4 ≤ k ≤ 5 x 10-2 at 550 nm), optical gap (4.01 eV ≥ E 9 ≥ 1.95 eV), microstructural characteristics (1.3 nm ≤ surface roughness ≤ 8.3 nm), and chemical composition (0.47 ≤ x ≤ 1.35) of the coatings as a function of duty cycle. Using solely the control of duty cycle, we fabricate two types of a-SiNx:H-based thin film devices, namely (i) a model Fabry-Perot optical filter deposited on a plastic substrate, and (ii) a superlattice structure displaying a photoluminescence signal four times as large as the reference single layer. (2) In the second article, transparent hydrogenated amorphous silicon nitride coatings are prepared by dual-mode microwave/radiofrequency PECVD. By controlling the effects of plasma density and ion energy on the film growth, it is possible to modify the microstructure of the coatings and hence the refractive index, n. Using this method, we are able to vary n from 1.6 to 2.0 at 550 nm, simply by adjusting the power levels of the radiofrequency and microwave components. (3) In the third article, surface treatments are performed on porous layers using argon and nitrogen RF plasmas in order to densify and flatten their surface, and hence to obtain an abrupt transition between porous and dense films. We show that besides the densification effect, preferential sputtering and annealing phenomena also occur during plasma treatments at high bias values ( VtreatB > 400 V), leading to silicon enrichment at the film surface and chemical stabilization of the film bulk. Using atomic force microscopy, we observe a significant reduction of the surface roughness after treatment of the single layers (≈ 70% reduction) and multilayer stacks (≈ 60% reduction). (4) In the next chapter, we demonstrate the concept of using nanoporous multilayer optical filters as optical gas sensors, based on the plasma-enhanced chemical vapor deposition of Si3N4 films with controlled porosity. In situ real-time spectroscopic ellipsometry, associated with the effective medium approximation is employed for characterizing the film microstructure, particularly the total volume fraction of porosity (fv), and the fraction of open porosity (fo). In order to do so, the effective refractive index (neff) of the as-grown films is evaluated both in vacuo and when exposed to ethanol vapor.

  11. Benzodiazépines: dépendance et approche thérapeutique pour un retrait graduel

    PubMed Central

    Blais, Diane; Pharm, B.; Pharm, Louise Petit, B.

    1987-01-01

    The extensive use of benzodiazepines in treating anxiety and insomnia makes clinicians ask themselves about the risk of addiction relating to these drugs.1-3 Indeed, it is estimated that in Canada, the United-States, and Western Europe, between 10% and 20% of persons use tranquilizers or hypnotics (mostly benzodiazepines) during a one-year period. Of these persons 70% are 50 years of age or more. It has been noted that 15% of those persons have been using these drugs for more than 12 months.4, 5 In 1980, Tyrer reported that 50% of the patients who receive a prescription for benzodiazepines renew that prescription without consulting their physician.6 In this article, the authors briefly review the dependency, risk factors and clinical signs resulting from withdrawal of these drugs. They also define a rational therapeutic approach to discontinuing their use. PMID:21263995

  12. Conception de couches minces tribologiques pour augmenter la resistance a l'erosion par impacts de particules

    NASA Astrophysics Data System (ADS)

    Hassani, Salim

    Solid particle erosion (SPE) is a serious problem in gas turbines, pumps, heat exchangers and piping systems in aircrafts and other applications. Sand and dust ingested by gas turbine engines may cause major damage to compressor gas path components, leading to severe performance degradation, excessive wear, increased maintenance and eventually premature failure of the engines. For the compressor section of aerospace gas turbine engines, in addition to the complex filtration systems used to screen the eroding particles, tribological coatings, such as TiN, Ti/TiN, CrN and TiAlN are used as protective layers of the base titanium alloy (Ti-6Al-4V) or stainless steels (17-4PH and 410) materials (substrates) against erosive wear. Such coatings can extend the service life of the components, but their performance still remains insufficient due to the complexity of failure mechanisms occurring upon SPE. Therefore, aerospace industry seeks to develop high performance coatings for the protection against erosion by solid particles. However, with many new materials used and tested for different applications and operation under different conditions, conducting experiments for each one of them is becoming increasingly difficult. Presently, coating selection criteria to prevent damage caused by erosion are based on trial and error experiments instead of prior design of coating's architecture and properties to maximize erosion resistance. The present work focuses on the use of advanced finite element (FE) methods to design erosion resistant (ER) coatings. It contributes a new methodology based on the analysis of transient stresses generated by a single impact event. Identification of coating architectures in which such stresses are minimized and crack propagation suppressed, allows one to predict and possibly minimize the erosion rate. Erosion mechanisms and governing erosion parameters are investigated to predict the coating behavior in simulated erosion conditions. The calculation variables include impact velocity (in the range of 50--300 m/s), particle size and the mechanical properties of both the target and the impacting particle. Specifically, we investigate the impact response of coatings fabricated by physical vapor deposition (PVD) and plasma enhanced chemical vapor deposition (PECVD). This includes single and multilayer TiN and nanocomposite nc-TiN/a-SiN1.3 and nc-TiCN/a-SiCN systems on titanium alloy and stainless steel substrates. In particular, we correlate the thickness and the coating macroscopic properties, such as hardness, Young's modulus, and toughness with the erosion. The calculations confirmed earlier findings that for a single layer coating, a combination of low modulus and a high thickness lead to local stress reduction and hence possible erosion resistance enhancement. The FE simulations have further shown that a tensile stress exceeding a critical stress sigmacrit = 3.95 GPa can be easily produced by a single particle impact. For each combination of particle velocity and size, a map of tensile stresses in the TiN coating, corresponding to the predicted erosion performance, was produced. The FE model has then been extended to multilayer coating systems containing superhard nanocomposite materials. These coatings configurations, when combined with tailored mechanical properties have shown to provide an improvement of the performance over comparable single layer configurations. The development of high performance erosion-resistant coatings also requires understanding of stress propagation upon particle impact. In the second part of this work, we apply a finite element methodology to enhance and optimize the resistance of protective coatings to erosion by solid particles with appropriate stress management. A controlled distribution of the initial residual stress in the coating was used to counteract impact stress, while a Young's modulus distribution was applied to optimize impact energy spreading throughout the coating system. Considering both tensile stress reduction and energy absorption, a multi-layer configurat

  13. Mesure sans contact d'un panneau d'aile d'avion et analyse numerique pour controle dimensionnel

    NASA Astrophysics Data System (ADS)

    Sok, Michel Christian

    During the manufacturing of the wing skin, the inspection steps are essential to ensure their conformity and thus allow the wings to ensure the required aerodynamic performances. Nowadays, considering the panel's low stiffness which prevents traditional inspection methods, this inspection is done manually with a template gauge and a jig. Iteratively, as long as form compliance is not reached, the panel goes through an additional dimensional refinement before being inspected in a second time. Because the jig is accurate, it is very expensive and furthermore, the inspection of panels is time-consuming by monopolizing the jig, which cannot be used in the meantime. Using this consideration as a starting point, this project seeks to provide a response to the practicability of a methodology based on the automation of that king of operation. This by integrating into the process non-contact measuring machines capable of acquiring numerically the geometrical shape of the panel. Moreover, the opportunity of realizing this operation without the use of a jig is also being considered, which would leave it free for other tasks. The methodology suggested use numerical simulations to check form compliance. Finally, this would provide a tool to assist the operator by allowing a semi automated inspection without jig. The methodology suggested can be describe in three steps, however it is necessary to propose an additional step to validate the results achieved with this methodology. Then, the first step consist of manually acquiring reference values which will served to be compared with the values obtained during the application of the methodology. The second step deals with the numerical acquisition, with a laser scanner, of the object to be inspected settled down on some supporting plate. The third step is the numerical reconstruction of this object with a computer-aided design software. Finally the last step consists of a numerical inspection of the object to predict the form compliance. Considering the large dimensions of the wing skins and of the jigs used in industry, the methodology suggested takes accounts of the available means in laboratory. Then, the objects used have lower dimensions than those used in the industry. That is the reason why a simplifying assumption that the shot peening operation has a negligible effect on the evolution of the thickness of the wing skin is made. Furthermore, the non-contact measurement device is also tested to know its accuracy under real conditions. Those two preliminary studies show that the thickness variation of a plate after being shot peened, with extreme parameters in terms of effects, remains negligible for the study of practicability realized in this thesis. The study on the performance of the REVscan 3D also brings to light that this variation would probably be drown in the uncertainty acquired by the device during the numerical acquisition. In this project, only the steps two and three are dealt with in depth. This study involves essentially to test the measuring device and the software about their capacity of numerically acquiring an object and then to bring it to another state of stresses with the help of a simulation. Indeed, the validation of the free state step is problematic because it is precisely a state that cannot be obtained in an experimental way. As an analogy, it is suggested to pass from a particular state of stress to another because, in a simplified way, the free state step is equivalent to a change of a state of stress. The study of the result allows to put forward a particular phenomenon linked to thin plates : it is a sudden change of the form when the plate is in a particular state of stress. The software is then no more able to predict that kind of comportment. Several tests are carried out to confirm the existence of that phenomenon and show that the stress modulus, the point of application of the stresses and the position of the support points are the more influent parameters. However, even by ensuring to avoid this phenomenon during the tests, the degree of accuracy reached by the software is far from being sufficient. Indeed, the uncertainty of the results is still too high and the next studies will have to focus on improving the results. Currently, the tests realized in this thesis are not enough to validate the steps 2 and 3 of the methodology suggested. Nevertheless, the phenomenon highlighted which can suddenly modify the comportment of thin plates and the information gathered in these tests establishes a base for further research. (Abstract shortened by UMI.).

  14. Observation d'un minimum plat pour RZ Cas [Observation of a flat minimum of RZ Cas

    NASA Astrophysics Data System (ADS)

    Dumont, M.

    1995-07-01

    We observed a minimum of RZ Cas during the night 15/16 august 1991 with the 76 cm telescope of the Fungfraujoch Observatory. We found: Min = HJD 2,448,484.50062 and observed a flat minimum during 10 minutes.

  15. Pour une pedagogie du sens: Les dessous silencieux de la conversation (Toward a Pedagogie of Meaning: The Silent Undercurrents of Conversation).

    ERIC Educational Resources Information Center

    Bertrand, Denis; Care, Jean-Marc

    1991-01-01

    Using examples from a conversation between birds, drawn from a story, the importance of nonverbal aspects of conversation is examined. Several kinds of nonverbal cues are discussed, including the common history of the interlocutors, their current relationship, turn taking, and the interplay of these factors. (MSE)

  16. Raindrops Keep Falling on My Tent: The Rainy Day Book. Packed with Hundreds of Great Ideas of What To Do in Camp When It Pours.

    ERIC Educational Resources Information Center

    Mackay, Joy

    This booklet lists numerous ideas to use for rainy-day camp activities, and many that are appropriate for other situations. Chapter 1, "Rain Can Be Beautiful" encourages planning for and a positive attitude about rain. It suggests ways to take advantage of rainy days to relax, read about camping skills, repair equipment, or test campcraft skills.…

  17. Pour une gestion amelioree des ressources humaines dans les departements universitaires--Les possibilites offertes par la modulation des taches des professeurs.

    ERIC Educational Resources Information Center

    Desrosiers, Jean-Yves

    1991-01-01

    Task modulation is being examined as a means for improved utilization of human resources and greater flexibility within departments of Quebec universities. In this paper (written in French), a definition for this concept is proposed, the literature is reviewed, and prerequisite and other conditions critical to successful implementation are…

  18. Seasonal differences in the efficacy of pour-on formulations of triclabendazole and ivermectin or abamectin against late immature liver fluke (Fasciola hepatica) in cattle.

    PubMed

    Sargent, R M; Chambers, M; Elliott, T

    2009-04-01

    Three controlled studies were conducted to determine the efficacy against late immature (6 weeks) Fasciola hepatica of two currently available fasciolicides (Genesis Ultra and Coopers Sovereign) which are applied externally to cattle. Efficacy of the two products was assessed when application was made under winter, spring and summer conditions. Efficacies for winter, spring and summer respectively, based on arithmetic mean total fluke counts, were 78.9%, 91.7% and 99.6% for Coopers Sovereign and 73.4%, 89.7% and 99.6% for Genesis Ultra. Seasonal differences with treatment efficacy were indicated. The studies also confirmed previous observations that liver fluke egg counts overestimate the efficacy of fasciolicides and that total fluke counts is the most reliable method for assessing efficacy of such products. PMID:19167826

  19. Résection laparoscopique d'une duplication gastrique chez l'adulte: traitement avec succès pour une pathologie rare

    PubMed Central

    Toumi, Omar; Hssine, Hiba Ben; Noomen, Faouzi; Jabra, Sadok Ben; Korbi, Ibtissem; Abdelmoula, Ali; Trimech, Mayada; Mansour, Wafa Ben; Faiez, Boughanmi; Khlifa, Mohamed Ben; Rabah, Hatem; Mahmoudi, Ammar; Nasr, Mohamed; Zouari, Khadija; Saffar, Hammouda; Hamdi, Abdel Aziz

    2015-01-01

    Les duplications de l'appareil digestif sont les malformations congénitales rares qui peuvent toucher tout l'appareil digestive depuis la bouche jusqu’ à l'anus. Certaines duplications sont asymptomatiques et sont diagnostiqués dans la plupart des cas pendant l'enfance. La prise en charge de la duplication gastrique est essentiellement chirurgicale. Le traitement de choix est l'exérèse complète de la duplication gastrique. Les auteurs rapportent un cas inhabituel de duplication gastrique complètement reséquée par laparoscopie. A notre connaissance, ceci est le premier cas d'une duplication gastrique traitée avec succès par laparoscopie dans la littérature Tunisienne. La Résection laparoscopique peut être ajoutée à l'arsenal thérapeutique dans le traitement chirurgical de duplications du tube digestif. PMID:26889326

  20. Developpement et evaluation d'un environnement informatise d'apprentissage pour faciliter l'integration des sciences et de la technologie

    NASA Astrophysics Data System (ADS)

    Saliba, Marie-Therese

    2011-12-01

    Through this research we will fully assess the benefits brought by the ExAO (Computer Assisted Experimentation) in school laboratories of science and technology in Lebanon. We would also like to mention its contribution in a tangible way in laboratory research of Pedagogic Robotic from Montreal University, particularly in the development of ExAO mulaboratory. We wanted to test the capabilities of the ExAO, its use in the classroom such as: 1. A replacement of a traditional laboratory in the use of the experimental method. 2. A scientific investigation tool. 3. An integration tool of experimental sciences and mathematics. 4. An integration tool of experimental sciences, mathematics and technology in the technoscientific learning. To do so, we have mobilized 13 group classes, designated teachers to experiment themselves along with their students in order to assess, in a more realistic way, the benefits of implementing this micro computer laboratory at school. Different testing, evaluated using the results of learning activities undertaken by students, their responses to a questionnaire and feedback from teachers, show that: 1. The replacement of a traditional laboratory with an ExAO mulaboratory does not seem to pose problem, expected that students have adapted to it in only ten minutes, indicating that the speed with which data were graphed was more productive. 2. In order to investigate a physical phenomenon, the usability of the tutorial associated with the ability to amplify the phenomenon before its graph representation, has allowed students to design and implement quickly and independently an experiment to verify their prediction. 3. The integration of mathematics into an experimental approach can quickly grasp the phenomenon. In addition, it gives more autonomy and a meaning to the graphs and algebraic representations allowing to use them as a cognitive tool to interpret this phenomenon. 4. The approach made by the students to design and construct a technological object, showed that this activity was easily carried out by the use of universal sensors, amplifiers to offset the graphical modeling tool, and the tutorial ability to transform any measured variable by another variable (for instance, the resistance variation in temperature change, ...). This educational activity shows that students had no difficulty integrating in a single learning activity the mathematics, experimental sciences and technology, in order to design and implement a functional piece of technology. The ExAO mulaboratory, by offering new educational opportunities, such as the ability to design, produce and validate a technological object, in order to do so, new capacities to boost measures, modeling physical phenomena, developing new sensors, is an important addition to the experiments being conducted in ExAO. Keywords: ExAO, teaching, integration, Lebanese schools.

  1. Application de l'A.D.L, pour la mesure du champ de vitesses instationnaires de llecoulement a Ilechappement d'un moteur a combustion interne

    NASA Astrophysics Data System (ADS)

    Boutrif, M. S.; Thelliez, M.

    1993-01-01

    We present experimental results of instantaneous velocity measurement, which were obtained by application of the laser Doppler anemometry (L.D.A.) at the exhaust pipe of a reciprocating engine under real working conditions. First of all, we show that the instantaneous velocity is monodimensional along a straight exhaust pipe, and that the boundary layer develops within a 2mm thickness. We also show that the cylinder discharges in two phases : the blow down period and the final part of exhaust stroke. We also make obvious, that the flow escapes very quickly : its velocity varies between - 100m/s and 200m/s within a period shorter than 1ms ; thereby, we do record the acoustic resonance phenomenon, when the engine speed is greater than 3 000rpm. Finally, we show that in the exhaust pipe the apparent fluctuation - i.e. the cyclic dispersion and the actual turbulence - may reach 15%. Nous présentons des résultats expérimentaux du champ de vitesses instationnaires, obtenus par adaptation et application de la vélocimétrie laser interférentielle communément appelée à effet Doppler (L.D.A.), à l'échappement d'un moteur altematif à combustion inteme en fonctionnement nominal. Tout d'abord, nous montrons que dans un tube d'échappement long et droit, la vitesse instantanée est bien monodimensionnelle et que l'écoulement occupe la quasitotalité de la section droite géométrique du tube (une couche limite d'épaisseur inférieure à 2mm se développe très près de la paroi du tube). Nous pouvons également décrire la vidange du cylindre du moteur étudié en deux phases principales : bouffée d'échappement et refoulement des gaz brûlés par le piston. Nous mettons de même en évidence l'état très pulsé de l'écoulement, puisqu'en un intervalle de temps inférieur à 1ms, la vitesse de l'écoulement varie de - 100m/s à 200m/s ; nous enregistrons ainsi l'apparition du phénomène de résonance acoustique à des vitesses de rotation supérieures à 3 500tr/mn. Enfin, nous montrons qu'à l'échappement d'un moteur, l'intensité de fluctuation maximale, qui regroupe la dispersion cyclique et la turbulence proprement dite, peut atteindre 15%.

  2. La plaie cranio-cérébrale chez l'oxycéphale: quelle précaution prendre pour le traiter?

    PubMed Central

    Rifi, Loubna; Barkat, Amina; El Ouahabi, Abdessamad

    2015-01-01

    L'oxycéphalie isolée est une forme non syndromique des craniosténoses d'apparition tardive, elle est responsable d'hypertension intracrânienne insidieuse pouvant aboutir, sinon traitée précocement, à la cécité et à la débilité mentale. En général méconnue, elle peut être révélée par tout phénomène pouvant décompenser l'hypertension intracrânienne latente. Nous présentons un cas rare d'oxycéphalie révélée par un traumatisme crânien. Un jeune garçon de cinq ans s'est présenté avec une tuméfaction pariétale droite non réductible suite à une plaie cranio-cérébrale opérée à deux reprises à l’âge de trois ans puis six mois plus tard. Le bilan neuroradiologique a objectivé une hernie cérébrale avec empreintes digitiformes diffuses et une fusion des sutures crâniennes. Un bilan ophtalmologique a montré un strabisme convergent droit et un fond d’œil normal. Une chirurgie d'expansion crâniennea été réalisée. L’évolution post-opératoire était favorable. L'oxycéphalie harmonieuse peut passer inaperçue et un traumatisme crânien même bénin peut la révéler. PMID:26848359

  3. Enzymes Sériques pour le Diagnostic de la Nécrose Hépatique Aigüe Expérimentale

    PubMed Central

    Chalifoux, A.; Lagacé, A.

    1969-01-01

    The activity of certain serum enzymes ornithine carbamyl transferase (OCT), serum isocitric dehydrogenase (SIC-D), total serum lactic dehydrogenase (LDH) and its isoenzymes (LD1 and LD5) was evaluated as a mean of assessing experimental hepatic necrosis on dogs treated with CCl4. Measurement of activity levels of these enzymes, seldom carried out in veterinary clinical pathology, was made together with tests commonly used in our laboratories: serum glutamic pyruvic transaminase (SGPT), serum glutamic oxalacetic transaminase (SGOT) and serum alkaline phosphatase (SAP), cholesterol, bilirubin and prothrombin time. Measurement of the level of OCT was useful in the diagnosis of liver necrosis. The SIC-D level was important during the first four days of the experiment, but on subsequent days, the enzymatic activity was practically normal. Because of the wide variations of LDH serum levels in normal animals and since many factors influence its activity, the measurement of this enzyme and its isoenzymes was not a good index in the diagnosis of canine liver necrosis. The evaluation of cholesterol and bilirubin was judged of secondary importance because these metabolites are not specific to hepatic problems. A small battery of tests must be used to establish a precise diagnosis and a clear prognosis. To the routine tests like those for SGOT, SGPT and SAP, should be added the evaluation of OCT and SIC-D. PMID:4242768

  4. A nomogram calculating the features of the astronomical telescope (French Title: Nomogramme pour le calcul des caracteristiques de l'astroscope)

    NASA Astrophysics Data System (ADS)

    Pelat, A.

    2006-10-01

    This article focuses on the theoretical study, drawing up and use of a cartesian nomogram to calculate the features of an astronomical telescope.It also includes a description of Christiaan Huygens's 'pipeless' astronomical telescope.

  5. Pour Savoir ou vous en etes. Evaluez vous-meme vos connaissances (Knowing Where You Are. Evaluate Your Knowledge by Yourself).

    ERIC Educational Resources Information Center

    Aiello, Angelo; And Others

    1986-01-01

    A form is presented for language teacher self-evaluation concerning attitudes and knowledge about learning theories, general linguistics, sociolinguistics, pragmatics, discourse analysis, teaching methodology, the communicative approach, class activities, class management, instructional support, and evaluation. (MSE)

  6. Pour Une Poesie Chretienne a L'age Baroque: Mysticisme, Heroisme et Feminisme Chez Pierre Le Moyne 1602-1671

    ERIC Educational Resources Information Center

    Fares, Laila

    2012-01-01

    The study constituting the object of this research on one of the best French poets of the 17th century, yet one of the least known, Pierre Le Moyne, aims at restoring this great French poet in his right place, preparing and clearing the way in order to allow further research and stimulate future interest in his works. Pierre Le Moyne is not only…

  7. Transformations de phases dans les alliages forcés: Un concept utile pour les études d'usure

    NASA Astrophysics Data System (ADS)

    Chaffron, Laurent; Le Bouar, Yann; Martin, Georges

    2001-07-01

    The concept of driven alloys is introduced and examples are given for alloys under irradiation or under high energy ball milling. Both real and computer experiments show that the stationary configuration of alloys under external forcing depends on the overall temperature, on the ratio of the ballistic to the thermally activated atomic jump frequency, and on the space and time correlation of the ballistic jumps. As well as temperature, the description of driven phase transformations requires a new control parameter: the intensity of forcing. The latter is shown to be the irradiation flux for alloys under irradiation and the momentum transferred per unit time to an elementary volume of matter, under milling. We show how to use these concepts to address the wear rate of swift train wheels (TGV): it is found that the wear rate is proportional to the intensity of forcing.

  8. Standards for University Libraries = Normes pour les bibliotheques universitaires = Richtwerte fur Universitatsbibliotheken = Normas de bibliotecas universitarias. IFLA Professional Reports No. 10.

    ERIC Educational Resources Information Center

    Lynch, Beverly P., Ed.

    This statement prepared by the International Federation of Library Associations' Section of University Libraries and Other General Research Libraries presents standards of general principles designed to accomplish the following: (1) provide a means by which the quality of the library serving a university can be assessed; (2) offer guidance for…

  9. Une question nouvelle pour l'action educative et la formation: Le viellissement des populations (A New Issue for Educational Action and Training: The Aging of Populations).

    ERIC Educational Resources Information Center

    Gani, Leon

    1993-01-01

    In industrialized societies, life expectancy is increasing while the elderly are increasingly marginalized. Aging, especially with respect to social demography, should be an essential educational topic for teachers and those who care for the elderly. Education for the elderly should help them assume the role of transmitting their knowledge and…

  10. Elaboration d'un simulateur de gravure par plasma de haute densite base sur une approche cellulaire pour l'etude de profils dans divers materiaux

    NASA Astrophysics Data System (ADS)

    Saussac, Jerome

    Sub-micrometer and nanometer-size device manufacturing requires perfect control of fabrication processing, in particular plasma etching. The fabrication of such devices is complex and the requirements in terms of quality and geometry of the etching profiles impose to use the best adapted operating conditions. Simulation of space and time-etching profile evolution that is proposed in this thesis addresses these issues. The simulator yields a better understanding of the fundamental mechanisms that occur during plasma etching of features in various materials. It enables to test the influence of plasma parameters on the profile shape and thus to determine the optimal operating conditions. The development of the simulator is based on the fundamental concepts in plasma etching. From thorough review of the various numerical approaches available to simulate etching profile evolution, we have developed a stable and flexible algorithm that enables to emphasize the importance of some key-parameters for the realization of etching profiles by high-density and low-pressure plasma. The capabilities of this algorithm were tested on the study of Si sputtering in an argon plasma and of ion-assisted chemical etching of SiO2/Si in a chlorine plasma. From comparisons between simulated and experimental profiles, we have shown the importance of some parameters, like the nature of the gas, the plasma pressure, the initial shape of the mask, the mask/material selectivity, the neutral/ion flux ratio, etc. We also linked these parameters to the formation of defects in the profile, for exemple mask facetting, sidewall bowing and microtrenching. Finally, we have shown that redeposition of sputtered atoms compete with electric surface charging to explain V-shape profiles observed on Pt sputtered in argon plasmas. Keywords. plasma, etching, profile, simulation, silicon, platinum, redeposition, microtrenching

  11. Lutte biologique pour l’agriculture et l’environnement américains Biological Control for American Agriculture and the Environment

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The European Biological Control Laboratory (EBCL), located on the Agropolis Campus, is operated by the United States Department of Agriculture to conduct research on biological control of invasive arthropods and plants. Many of the target species originated in Europe, Asia or Africa, so we explore ...

  12. Developpement d'un systeme pour la mesure du taux de vide dans un ecoulement diphasique par une methode utilisant des micro-ondes

    NASA Astrophysics Data System (ADS)

    Pochet, Steven

    The measurement of the void fraction is an important parameter in many industrial fields. Whether it is to prevent the phenomenon of critical heat flux in heat tube of thermal power plants, the explosion of gas pockets in oil rigs’ pipes or to detect bubbles in medical catheters, the knowledge of the void fraction can be a key parameter in many diverse applications. Several invasive and non-invasive measurements techniques have been developed these last decades and are based on the difference between the physical properties of liquid and gas. Some of these techniques are not always possible to implement due to restrictions in the geometry of tubes or regulatory standards limiting their use. Throughout this work we propose a new non-invasive void fraction measurement technique based on the reflection of electromagnetic waves on the water-air interface of the mixture. The reflection of electromagnetic wave is induced by a change in the impedance of the propagation medium. The impedance is function of the dielectric properties of the medium. The characteristics of air and water being distinct, it is possible to calculate the complex reflection coefficient at the interface of a double phase mixture. To this end, mathematical modeling of the response of an electromagnetic wave in a tube containing a two phase mixture was made using the model of transmission lines, applicable to microwave frequencies we use. The effects of the amount of air in water and the position of the bubbles in the section of the tube were simulated. It was shown that the phase of the reflected wave was sensitive to the position of bubbles in the tube’s section and that the magnitude of the reflection coefficient varied with the mixture’s void fraction. Subsequently, we designed and built a six-ports reflectometer operating at 2.45 GHz. This system allows the processing and calculation of the reflected wave from the incident wave. A six-ports network, a patch antenna, a wave generator and an amplifier were simulated using HFSS and ADS software. They were then built using the technology of micro-strips on dielectric laminates and the entire system was then calibrated at 6 different frequencies near 2.45 GHz. To this end, we used 4 and 5 loads calibration algorithms that gave us calibrated results with less than 2 % errors. Afterwards, the system was implemented: the antenna was placed tangent to the wall of a vertical tube and connected to the six-ports which was connected to a computer recording and displaying the results in real time. A valve positioned under the tube allows air into the tube and to vary the flow rate. The results showed that the system was sensitive to changes in void fraction from 1% and followed the predictions of the simulated model to a void fraction of about 10%. Possibly du to a change in the structure of the flow for a void fraction of 10%, the signal no longer varies monotonically with respect to the increasing void fraction possibly because of a change in the flow’s configuration. It was shown that the Rayleigh scattering phenomena of air bubbles was involved in the reflection coefficient response. Pictures of the stream at various void fraction state were taken and confirmed a change in the flow’s configuration. By placing a Plexiglas rod to simulate a flow geometry located in the section of the tube, it was noted that the change in phase of the reflected wave was the same as the model when the rod was placed in an empty tube (very few attenuation loss environment). Hence, it is possible to determine the distance of an object in a section of tube from the measurement of the reflected wave’s phase. When the rod is in a very absorbent medium such as water, it is possible to detect a moving rod when it is sufficiently close to the antenna (less than two wavelengths) thanks again to the phase variation. However, detection is still much more difficult due to the absorption of water and ca

  13. Algorithme d'optimisation du profil vertical pour un segment de vol en croisiere avec une contrainte d'heure d'arrivee requise

    NASA Astrophysics Data System (ADS)

    Dancila, Radu Ioan

    This thesis presents the development of an algorithm that determines the optimal vertical navigation (VNAV) profile for an aircraft flying a cruise segment, along a given lateral navigation (LNAV) profile, with a required time of arrival (RTA) constraint. The algorithm is intended for implementation into a Flight Management System (FMS) as a new feature that gives advisory information regarding the optimal VNAV profile. The optimization objective is to minimize the total cost associated with flying the cruise segment while arriving at the end of the segment within an imposed time window. For the vertical navigation profiles yielding a time of arrival within the imposed limits, the degree of fulfillment of the RTA constraint is quantified by a cost proportional with the absolute value of the difference between the actual time of arrival and the RTA. The VNAV profiles evaluated in this thesis are characterized by identical altitudes at the beginning and at the end of the profile, they have no more than one step altitude and are flown at constant speed. The acceleration and deceleration segments are not taken into account. The altitude and speed ranges to be used for the VNAV profiles are specified as input parameters for the algorithm. The algorithm described in this thesis is developed in MATLAB. At each altitude, in the range of altitudes considered for the VNAV profiles, a binary search is performed in order to identify the speed interval that yields a time of arrival compatible with the RTA constraint and the profile that produces a minimum total cost is retained. The performance parameters that determine the total cost for flying a particular VNAV profile, the fuel burn and the flight time, are calculated based on the aircraft's specific performance data and configuration, climb/descent profile, the altitude at the beginning of the VNAV profile, the VNAV and LNAV profiles and the atmospheric conditions. These calculations were validated using data generated by a FMS platform produced by CMC Electronics - Esterline for an Airbus A310 aircraft model. The performance of the algorithm was evaluated using two aircraft models, Airbus A310 and Sukhoi RRJ, three LNAV profiles and three wind profiles.

  14. Utilisation de procedes de microfabrication pour la realisation de modules thermoelectriques a base d'alliages (Bi,Sb)2(Te,Se)3

    NASA Astrophysics Data System (ADS)

    Kashi, Siamak

    The production of thermoelectric devices uses nearly handmade techniques as an industry standard. These techniques are not suitable for the fabrication of smaller devices, where thermoelements are shorter than 1 millimetre. Researchers are focusing on how to decrease the height of thermoelements in a device, to the extent of depositing thermoelectric thin films. However, the best thermoelectric performances are obtained on modules fabricated from bulk material. Many tests were made to decrease the overall size of these devices, but until now, they would not permit to obtain the same range of performances as industrial devices. The aim of this project is to use microfabrication processes to obtain high power density thermoelectric devices. The precision obtained with the use of microfabrication techniques and automated methods has the potential to increase the performance and the industrial production of these devices. Fabrication steps were designed and tested in the facilities of the Ecole Polytechnique de Montreal to create hot extruded p-type and n-type (Bi,Sb)2(Te,Se)3 alloy based thermoelectric devices. These steps can be listed in three different categories, surface treatments, microfabrication methods and hot assembly. After cutting, p-type and n-type wafers were polished, underwent electropolishing and chemical etching before a diffusion barrier layer of nickel was deposited. Photolithography printed a pattern on the samples, where tin was then electroplated. A first assembly allowed soldering samples of each conduction type to alumina plates, before cutting the sample to free the thermoelements. A final assembly then created the finished devices by soldering of the two parts containing p-type and n-type thermoelements. The produced devices were functional, validating the designed steps. Electrical characterization of the best modules obtained indicate that the electromotive force is comparable to that of commercial modules under the same conditions; however the efficiencies are still a factor of five lower. This fabrication process leads to a greater miniaturization of thermoelements and also has a potential for automation, with further developments needed (in particular concerning the final assembly) to achieve this goal.

  15. Opportunities for Tomorrow: National Learning Needs Assessment Summary Report = Des Possibilities pour L'Avenir: Rapport Sommaire sur L'Evaluation Nationale des Besoins en Apprentisage.

    ERIC Educational Resources Information Center

    Communications, Energy & Paperworkers Union of Canada, Ottawa (Ontario).

    The Communications, Energy, and Paperworkers Union of Canada assessed literacy learning needs. In focus group discussions, members were asked their perception of such needs in the face of changes in the workplace and society; local union officers (LUOs) were asked how they saw the role of unions in supporting members' literacy learning; employers…

  16. Calculs Monte Carlo en transport d'energie pour le calcul de la dose en radiotherapie sur plateforme graphique hautement parallele

    NASA Astrophysics Data System (ADS)

    Hissoiny, Sami

    Dose calculation is a central part of treatment planning. The dose calculation must be 1) accurate so that the medical physicists and the radio-oncologists can make a decision based on results close to reality and 2) fast enough to allow a routine use of dose calculation. The compromise between these two factors in opposition gave way to the creation of several dose calculation algorithms, from the most approximate and fast to the most accurate and slow. The most accurate of these algorithms is the Monte Carlo method, since it is based on basic physical principles. Since 2007, a new computing platform gains popularity in the scientific computing community: the graphics processor unit (GPU). The hardware platform exists since before 2007 and certain scientific computations were already carried out on the GPU. Year 2007, on the other hand, marks the arrival of the CUDA programming language which makes it possible to disregard graphic contexts to program the GPU. The GPU is a massively parallel computing platform and is adapted to data parallel algorithms. This thesis aims at knowing how to maximize the use of a graphics processing unit (GPU) to speed up the execution of a Monte Carlo simulation for radiotherapy dose calculation. To answer this question, the GPUMCD platform was developed. GPUMCD implements the simulation of a coupled photon-electron Monte Carlo simulation and is carried out completely on the GPU. The first objective of this thesis is to evaluate this method for a calculation in external radiotherapy. Simple monoenergetic sources and phantoms in layers are used. A comparison with the EGSnrc platform and DPM is carried out. GPUMCD is within a gamma criteria of 2%-2mm against EGSnrc while being at least 1200x faster than EGSnrc and 250x faster than DPM. The second objective consists in the evaluation of the platform for brachytherapy calculation. Complex sources based on the geometry and the energy spectrum of real sources are used inside a TG-43 reference geometry. Differences of less than 4% are found compared to the BrachyDose platforms well as TG-43 consensus data. The third objective aims at the use of GPUMCD for dose calculation within MRI-Linac environment. To this end, the effect of the magnetic field on charged particles has been added to the simulation. It was shown that GPUMCD is within a gamma criteria of 2%-2mm of two experiments aiming at highlighting the influence of the magnetic field on the dose distribution. The results suggest that the GPU is an interesting computing platform for dose calculations through Monte Carlo simulations and that software platform GPUMCD makes it possible to achieve fast and accurate results.

  17. Nouvelles données paléoenvironnementales pour le Quaternaire récent en Tunisie centrale (bassin de Maknassy)

    NASA Astrophysics Data System (ADS)

    Ouda, Bouchra; Zouari, Kamel; Ouezdou, Hedi Ben; Chkir, Najiba; Causse, Christiane

    1998-06-01

    Sedimentary deposits outcropping on the Wadi Leben and Wadi Ben Sellam banks in the Maknassy Basin (central Tunisia) have registered paleoclimatic variations, and particularly humid episodes, already known for Upper Pleistocene and Holocene, in present hyperarid areas of northern Sahara. A pluridisciplinary study, including prehistory, sedimentology, mineralogy, ecology and radiochronology ( 14C, uranium-thorium [U-Th]), improves the comprehension of paleoenvironmental interpretations and makes it possible to precisely determine the chronological framework of humid episodes during the Upper Quaternary in Tunisia.

  18. Optimisation d'un systeme d'antigivrage a air chaud pour aile d'avion basee sur la methode du krigeage dual

    NASA Astrophysics Data System (ADS)

    Hannat, Ridha

    The aim of this thesis is to apply a new methodology of optimization based on the dual kriging method to a hot air anti-icing system for airplanes wings. The anti-icing system consists of a piccolo tube placed along the span of the wing, in the leading edge area. The hot air is injected through small nozzles and impact on the inner wall of the wing. The objective function targeted by the optimization is the effectiveness of the heat transfer of the anti-icing system. This heat transfer effectiveness is regarded as being the ratio of the wing inner wall heat flux and the sum of all the nozzles heat flows of the anti-icing system. The methodology adopted to optimize an anti-icing system consists of three steps. The first step is to build a database according to the Box-Behnken design of experiment. The objective function is then modeled by the dual kriging method and finally the SQP optimization method is applied. One of the advantages of the dual kriging is that the model passes exactly through all measurement points, but it can also take into account the numerical errors and deviates from these points. Moreover, the kriged model can be updated at each new numerical simulation. These features of the dual kriging seem to give a good tool to build the response surfaces necessary for the anti-icing system optimization. The first chapter presents a literature review and the optimization problem related to the antiicing system. Chapters two, three and four present the three articles submitted. Chapter two is devoted to the validation of CFD codes used to perform the numerical simulations of an anti-icing system and to compute the conjugate heat transfer (CHT). The CHT is calculated by taking into account the external flow around the airfoil, the internal flow in the anti-icing system, and the conduction in the wing. The heat transfer coefficient at the external skin of the airfoil is almost the same if the external flow is taken into account or no. Therefore, only the internal flow is considered in the following articles. Chapter three concerns the design of experiment (DoE) matrix and the construction of a second order parametric model. The objective function model is based on the Box-Behnken DoE. The parametric model that results from numerical simulations serve for comparison with the kriged model of the third article. Chapter four applies the dual kriging method to model the heat transfer effectiveness of the anti-icing system and use the model for optimization. The possibility of including the numerical error in the results is explored. For the test cases studied, introduction of the numerical error in the optimization process does not improve the results. Dual kriging method is also used to model the distribution of the local heat flux and to interpolate the local heat flux corresponding to the optimal design of the anti-icing system.

  19. From Parched to Pouring: Can the 2015 - 2016 El Niño Event Bring Drought Relief to California and the Western U.S.

    NASA Astrophysics Data System (ADS)

    Lamb, K. W.; Miller, W. P.; Lakshmi, V.; Piechota, T. C.; Tootle, G. A.; Santos, N. I.; Kalra, A.

    2015-12-01

    Water resource managers throughout the Western United States have struggled with persistent and severe drought since the early 2000s. In California, a historic 4-year drought period has resulted in just under 50% of the state experiencing exceptional drought conditions, and record low snowpack levels in the Sierra Nevada region; additionally, the drought has cost the California agricultural community approximately 3 billion in losses. In the Colorado River Basin, nearly 80% of the basin is in drought, as record low levels at Lake Mead threaten to impose the first ever water shortage in the Lower Colorado River Basin and threaten a portion of the nearly 960 billion economy dependent on water from the Colorado River. The El Niño Southern Oscillation (ENSO) describes warming sea surface temperatures in the Pacific Ocean that typically correlate with cool and wet precipitation events in California and the Lower Colorado River Basin during an El Niño event. Past research indicates the potential to identify analog ENSO events to evaluate the impact to water resources in the Western U.S. Two of California's wettest winters have occurred during the strong El Nino events of 1982 - 1983 and 1997 - 1998. The 1982 - 1983 event also corresponded with one of the wettest years on record in the Colorado River Basin. Current forecasts indicate the potential for one of the strongest El Niño events on record this winter. In this study, remotely sensed precipitation is utilized and compared to past ENSO events in an effort to identify possible hydroclimatic and water supply impacts to California and the Colorado River Basin. Western U.S. snowpack and precipitation events are further compared to streamflows in the region and the potential for extreme (i.e., flooding) events in an effort to inform water resource managers throughout the Western U.S.

  20. Un fusible de méthane pour l'explosion cambrienne : les cycles du carbone et dérive des pôles

    NASA Astrophysics Data System (ADS)

    Kirschvink, Joseph L.; Raub, Timothy D.

    2003-01-01

    The dramatic diversification of animal groups known as the Cambrian Explosion (evolution's 'Big Bang') remains an unsolved puzzle in Earth Science. The Vendian-Cambrian interval is characterized by anomalously high rates of apparent plate motion, interpreted as True Polar Wander (TPW), and by more than a dozen large, high-frequency perturbations in carbon isotopes that dwarf all others observed through the past 65 million years. We suggest that these biological, tectonic, and geochemical events are intimately related in the following fashion. First, tropical continental margins and shelf-slopes which formed during fragmentation of the supercontinent Rodinia accumulated massive quantities of isotopically-light organic carbon during Late Neoproterozoic time, as indicated by strikingly heavy isotope ratios in inorganic carbon during interglacial intervals. Second, an initial phase of Vendian TPW moved these organic-rich deposits to high latitude, where conditions favored trapping biogenic methane in layers of gas hydrate and perhaps permafrost. Continued sedimentation during Late Vendian time added additional hydrate/gas storage volume and stabilized underlying units until the geothermal gradient moved them out of the clathrate stability field, building up deep reservoirs of highly pressurized methane. Finally, a burst of TPW brought these deposits back to the Tropics, where they gradually warmed and were subjected to regional-scale thermohaline eddy variation and related sedimentation regime changes. Responding to the stochastic character of such changes, each reservoir reached a critical failure point independently at times throughout the Cambrian. By analogy with the Late Paleocene Thermal Maximum event, these methane deposits yield transient, greenhouse-induced pulses of global warming when they erupt. Temperature correlates powerfully with biodiversity; the biochemical kinetics of metabolism at higher temperature decrease generation time and maintain relatively rich and dense invertebrate populations. Repeated thermal pulses along with progressive disruption and alteration of global ocean circulation patterns by TPW could cause the increase in diversity that accompanied the radiation of metazoans. We suggest that a methane 'fuse' ignited the Cambrian Evolutionary Explosion.

  1. Analyse du transfert de chaleur et de la perte de pression pour des ecoulements supercritiques dans le reacteur CANDU-SCWR

    NASA Astrophysics Data System (ADS)

    Zoghlami, Sarra

    The supercritical water reactor is one of the six concepts of generation IV nuclear reactors that has been selected by the International Generation IV Forum (GIF). Canada has chosen to conduct advanced research on this type of reactor. For the design and safety analysis of the reactor concept, the development of numerical simulation codes is needed. The ARTHUR code is a thermal-hydraulic computer code developed by Fassi-Fehri (2008), at the Ecole Polytechnique de Montreal, to analyse the CANDU-6 reactor. The purpose of this project is to modify this numerical code so that it can be used to treat the CANDU-SCWR. To calculate the coolant thermal-hydraulics properties in the fuel channel of a CANDU-SCWR, it was assumed that the water flows under supercritical conditions is a one-phase flow. Thus within this code, we developed the conservation equations for one-phase flow. Hydraulic resistance and heat transfer at supercritical pressure are two important aspects to be considered in the modeling of a fuel channel in a nuclear reactor. To choose the accurate correlation to predict the pressure friction factor, we compared numerical calculations, using different correlations found in literature, to experimental data. We concluded that the Garimella (2008) correlation is the most consistent, to be incorporated in the ARTHUR &barbelow;SCWR code. We proved that the choice of the friction factor correlation affects slightly the distribution of thermal-hydraulic properties in the fuel channel. Under supercritical conditions, water thermal-physical properties are characterized by significant variations in the pseudo-critical region. This behavior influences the forced convection heat transfer phenomena. To choose the adequate correlation to calculate the forced convection heat transfer coefficient, we compared numerical results to experimental data, and we found that the standard deviation given by Mokry et al. (2010) correlation is the lowest. In order to model the fuel channel, some geometrical simplifications are made. In fact, we assumed that the coolant flow in the fuel channel is represented by the flow around the fuel rod, bounded by the first crown. This simplified model was used for neutronic/thermal-hydraulic coupled calculation performed with neutronic codes DRAGON/DONJON (Varin et al., 2005), to analyse the thermal-hydraulic behavior of the fuel channel in CANDU-SCWR. We observed that the coolant density at the fuel rod external surface, at the sixth fuel bundle is 3.5 times lower than the average coolant density in the fuel channel. This puts into question the assumption of considering the supercritical water flow as an homogeneous flow and the ability to build a supercritical water nuclear reactor in CANDU type, i.e., with horizontal fuel channels. In order to validate ARTHUR &barbelow;SCWR code, we compared our results to SUBCHAN code (Jiang et al., 2009), which is a thermal-hydraulic code developed to analyze CANDU-SCWR. Both codes give the same shapes and orders of magnitude for the coolant average temperature and the cladding-surface temperature. The axial distribution of the centerline temperature in the fuel rod is different. This is due to the fact that the calculations performed by the SUBCHAN code are not coupled to a neutronic code. For this reason, the thermal power distributions differs in the two codes. The variation of the mass flow influences the forced convective heat transfer, so, the distribution of thermal-physical properties in the channel. In fact, if the mass flow is reduced by 50% compared to the nominal mass flow rate, following a pump failure, the external fuel rod surface temperature exceeds the melting point, which is between 1400°C and 1455°C. This phenomenon may results in the radioactive contamination of the environment.

  2. Gathering Strength: Canada's Aboriginal Action Plan. A Progress Report = Rassembler nos forces: Le plan d'action du Canada pour les questions autochtones. Rapport d'etape.

    ERIC Educational Resources Information Center

    Department of Indian Affairs and Northern Development, Ottawa (Ontario).

    Gathering Strength is an integrated government-wide plan to address the key challenges facing Canada's Aboriginal people. Following an initial section on reconciliation of historic grievances, this report describes initiatives in the four areas addressed by the action plan: (1) partnerships (all schools received public awareness materials;…

  3. Integration de donnees multisources de teledetection et de donnees morphometriques pour la cartographie des formations meubles: Region de Cochabamba en Bolivie

    NASA Astrophysics Data System (ADS)

    Coulibaly, Lacina

    2002-04-01

    In this study, we develop a new method for mapping surficial deposits based on the modeling of the synergistic relationship between objects on the surface identifiable from remote sensing data, morphometric information derived from a DEM and geoscience ancillary data. The performance of SPOT-4 HRVIR, Landsat-7 ETM+, and RADARSAT-1 S4 and S5 mode SAR satellite data are compared in order to identify and map the surface indicators of surficial deposits. Furthermore, morphometric data such as altitude, slope, slope orientation, slope curvature and the potential moisture index extracted from the DEM are used to define the ground topographical characteristics. Supervised classifications were carried out from single source images and multisource image combinations using image fusion techniques including RVB, ACP and HIS. Different spectral indices including NDVI, TSAVI, RI and IF, as well as texture indices (average, standard deviation, entropy, contrast) are also compared. The different layers of information obtained are regrouped into categories of variables in relation to the vegetation cover, soils, the textural organization of the landscape and the topography. Results show that the supervised classification using the maximum likelihood method based on the RVB fusion of HRVIR and SAR S4 data provides the best classification rate of the land cover estimated at 96%. The morphometric data derived from the DEM are integrated with the results of the spectral indices, the texture indices and the land cover map in a linear equation within a discriminant analysis. Based on this equation, we were able to model the synergy between the surficial deposits indicators which allowed their identification and mapping. Based solely on the binary units derived from the land cover variables, the model is capable of identifying and classifying surficial deposits in the study area with a global accuracy of 70%. The addition of spectral indices relating to vegetation and soil to the preceding information increases the global classification precision to 79%. This improvement in the results confirms the importance of the two categories of spectral indices in providing information on the density of the vegetation cover, the state of growth of the vegetation and the soil spectral characteristics. The addition of texture indices added to the previous information increases the classification accuracy to 81%. Finally, the addition of topographical information to the parameters of the previous step provides a further improvement in the global classification rate from 81% to 88%, a further increase of 7%. Validation of the final results of the model applied to the entire study area, in comparison with ground truth data and geological maps, gives a global classification rate of 88%. (Abstract shortened by UMI.)

  4. Reconstitution de données climatiques pour l’Algérie du Nord : application des réseaux neuronaux

    NASA Astrophysics Data System (ADS)

    Bouaoune, Djahida; Dahmani-Megrerouche, Malika

    2010-11-01

    In the present context of climate change and preservation of biodiversity, the appreciation of the vulnerability of the natural ecosystems and their capacity of adaptation appears among the main preoccupations to the world level (GIEC, 2007). This assessment of the ecosystems requires the availability of climatic data, what is often made difficult by the weak density or even the absence of meteorological stations notably, to the level of the mountains zones. In order to study the climate-vegetation relationship in North Algeria, we use an automatic interpolation method, the neural network method, for the reconstitution of climatic data of the sampled sites, (1035 phytoecological samples), from the existing meteorological network (269 stations). This method is characterized by a great suppleness of non-linearity and by its capacity for reconstituting information from partial and not well-defined indications such as the case of data provided from meteorological networks. In order to reconstitution of climatic data, we use the explicate variables, longitude, latitude and altitude, the variables to explain being the rainfall and temperatures. To define the best approach, the network calibration has been activated on climatic parameters taken globally or solely, for the whole of study zone, and by geographical sector. The results of the interpolation are expressed through a climatic parameter cartography, released automatically by the MapInfo software. The reliability results obtained by this method can be appreciated by elaboration of errors maps comparing to reference data.

  5. Problemes de l'enseignement de la langue seconde standard pour les minorites culturelles (Problems in Standard Second Language Teaching for Cultural Minorities).

    ERIC Educational Resources Information Center

    Mackey, William F.

    Second-language and native-language methodologies are equally inappropriate as a foundation for the language training of cultural minorities. Second-language methodologies are based on the assumption that the language is to be acquired in school, as either a subject or a school activity. The relationship between teaching and learning is taken for…

  6. Joseph eleve des poissons au Gabon. Guide pour l'elevage des poissons (Joseph Raises Fish in Gabon. Guide for Raising Fish).

    ERIC Educational Resources Information Center

    Needham, Scott

    A guide, in French, to raising fish for food and profit is designed to instruct and encourage Gabonese natives to establish family fisheries. It describes and illustrates in story form the process used to plan the fishery, clear the land, seek help from an agricultural agent, create a dam, make compost, plan and build the pond, feed the fish,…

  7. Methode nouvelle pour la mesure CCD du diametre solaire avec un astrolabe. A new method for CCD measurements of the solar diameter with an astrolabe

    NASA Astrophysics Data System (ADS)

    Sinceac, V.; Chollet, F.; Laclare, F.; Delmas, C.

    1998-03-01

    Observing the Solar disk is a challenge and, as for the past visual observations, we have many results depending on observers and/or instruments. This was due to the differences in visual perceptions of the Sun's limb, instrumental errors and atmospheric disturbances. After a long series of visual observations at Calern Observatory, Francis Laclare felt the need for more impersonal and automatic measurements of the Solar diameter. After a series of analog CCD measurements (1989-1995), a digital data acquisition and processing was tested by the Paris Observatory group (F. Chollet and V. Sinceac) during the 1996 spring at Calern Observatory. Before starting a new continuous campaign of observations, to confirm eventual variations of the diameter and solar flatness, the aim is to find the best definition of the solar edge. The test campaign was spent comparing different solutions that were tried on two different astrolabes at Calern Observatory: The ``classical'' one, outfitted with eleven zerodur ceramic prisms (S astrolabe), that has been used for twenty years in the Laclare series and on the other hand an instrument equipped with a varying angle prism (V astrolabe) enabling many measurements (385 in 1996) for perfecting the know how. This article focusses on acquisition techniques and their feasibility. Two procedures were tried: The first one used alternately the direct and reflected images (separated using a revolving shutter in front of the objective) and the second one mathematically sorts out both components inside the computer (an image being a two-dimensionral array of numbers). According to the principle of the astrolabe, the measured quantity is the exact time crossing the parallel of altitude (defined by the prism angle) by the Sun's edge, i.e. the time of merging of the two images of the Sun in the focal plane of the telescope where the CCD matrix stands. Here comes the definition of the Solar edge for one frame as the collection of the inflect points on the luminosity function along each of the 256 useful lines (the matrix is 512 by 512 pixels). This means that a numerical derivation is performed on every other line of the CCD video camera which has to stand as vertical as possible. Then, for every frame, and through the 256 points, a parabola is fitted, using the least squares method. The top of this parabola materializes the prospective characteristic point. The sets of such points associated with the corresponding times of acquisition, are collected for both images and the exact time of contact of the two images may be obtained. This time is also the time when the solar edge crosses the almucantar. The results for the semi-diameter obtained during 1996 campaign are derived from sixty measurements with the revolving mask and sixty seven without it, performed on the Solar Astrolabe. They give a mean value of 959\\farcs39 +/- 0\\farcs 03 with a scatter of 0\\farcs 29. It is interesting to remark that the values of the error bar and the scatter obtained do not depend on the definition of the Solar edge, whereas the mean value does depend on it. It is noticed that going with the method is made a systematic error which slightly shrinks the diameter, but this value can be known statistically and the correction can easily be done. Choosing the best definition of the Solar edge will be the matter of a following article. The main advantage of such a digital acquisition procedure has to be stressed, as it enables to store the full data for further reference and, if possible, better future processing.

  8. Pouring or chilling a bottle of wine: an fMRI study on the prospective planning of object-directed actions.

    PubMed

    van Elk, M; Viswanathan, S; van Schie, H T; Bekkering, H; Grafton, S T

    2012-04-01

    This fMRI study investigates the neural mechanisms supporting the retrieval of action semantics. A novel motor imagery task was used in which participants were required to imagine planning actions with a familiar object (e.g. a toothbrush) or with an unfamiliar object (e.g. a pair of pliers) based on either goal-related information (i.e. where to move the object) or grip-related information (i.e. how to grasp the object). Planning actions with unfamiliar compared to familiar objects was slower and was associated with increased activation in the bilateral superior parietal lobe, the right inferior parietal lobe and the right insula. The stronger activation in parietal areas for unfamiliar objects fits well with the idea that parietal areas are involved in motor imagery and suggests that this process takes more effort in the case of novel or unfamiliar actions. In contrast, the planning of familiar actions resulted in increased activation in the anterior prefrontal cortex, suggesting that subjects maintained a stronger goal-representation when planning actions with familiar compared to unfamiliar objects. These findings provide further insight into the neural structures that support action semantic knowledge for the functional use of real-world objects and suggest that action semantic knowledge is activated most readily when actions are planned in a goal-directed manner. PMID:22349497

  9. Harmoniser les formations professionnelles secondaire et collegiale: Un atout pour leur developpement (Articulation of Secondary and Collegiate Vocational Training: An Asset for Its Development).

    ERIC Educational Resources Information Center

    Conseil des Colleges, Quebec (Quebec).

    A discussion is provided of the importance of articulation between vocational training at the secondary and postsecondary levels in Quebec. In the first chapter, the Council of Colleges describes the characteristics of vocational training at the collegiate level, including information on student characteristics and types of training, differences…

  10. Femme et education: Une equation determinante pour le developpement humain en Afrique (Women and Education: A Determining Equation for Human Development in Africa).

    ERIC Educational Resources Information Center

    Hane Ba, Fama

    1993-01-01

    Identifies the common characteristics of population education in African countries, including a focus on safeguarding cultural traditions. Suggests that improving the condition of women should be at the heart of population education because of their role in promoting family health and environmental protection and in the education of their…

  11. Enseignement et recherche: Guide pour le developpement des habiletes de recherche (Teaching and Research: Guide for the Development of Research Skills).

    ERIC Educational Resources Information Center

    Alberta Dept. of Education, Edmonton. Language Services Branch.

    Intended for use by both teachers and teacher-librarians, this guide for teaching library and information skills presents a five-step model for the research process: (1) planning the research project; (2) searching for relevant information; (3) selecting and evaluating the information found as it relates to the project; (4) presenting the results;…

  12. Systeme prototype pour le suivi des changements de l'occupation du sol en milieu urbain fonde sur les images du satellite RADARSAT-1

    NASA Astrophysics Data System (ADS)

    Fiset, Robert

    Land use and land cover mapping is of great importance for urban environment management. However, these maps become very rapidly outdated and require constant updating. Even in this day and age, most of the updating process is performed manually with the aid of aerial photography. The essential stages of this process consist in detecting the changes, establishing their nature and performing the database updating accordingly. Automating this operating procedure, even partially, is of utmost importance. Radar imagery may be acquired over large territories even in the presence of clouds. It has been the subject of very few research for urban mapping and there exists no operational application that makes use of it for map updating in this type of environment. However, it is well known that the imaging radar in general is sensitive to raised structures such as buildings. The apparition of new buildings in vacant areas, where most land cover and land use changes occur in urban areas, is clearly an indication for change detection. In the framework of this thesis, RADARSAT-1 imagery acquired in fine mode (10 meter resolution) has been investigated for its use in an innovative image processing method: the map-guided analysis of remote sensing data. The outdated map serves as a guide to segment a more recent image in order to compute characteristic features allowing to detect and identify changes. Tests show that texture measurements obtained with a fast method derived from the grey level co-occurrence matrix constitute such characteristic features allowing new buildings detection. Using 11 pixels square windows, contrast and entropy measurements are computed on a fine mode RADARSAT-1 image. Choosing appropriate thresholds is sufficient to pinpoint new buildings in vacant areas. Validation of this detection method is carried out over 5 sites presenting diverse physiographic characteristics using a dataset of 14 fine mode RADARSAT-1 images acquired with various incident angles throughout 1999. In the best cases, an accuracy of over 90% can be reached, while in the worst case this accuracy is around 75%. The results show that image acquisition using large incidence angles (F4 or F5) during a dry period (summer or fall) is preferable. With regard to the identification of the new taxons, it cannot be achieved with the radar imagery. Thus, a prototype system is developed to perform change detection using a RADARSAT-1 image, which then constitutes the key for the search by an operator into territorial databases (aerial photographs, land register, valuation rolls, etc.) to identify the new taxons. This prototype system, applied in a real case test, shows its potential for an operational use to accelerate and facilitate land use and land cover map updating over large territories. Key words. cartography, land use/land cover, urban areas, automatic updating, map-guided analysis, RADARSAT-l, texture measurements, grey level co-occurrence matrix.

  13. Computer Technologies for Postsecondary Students with Disabilities. Adaptech Project = Technologies Informatiques pour les Etudiants ayant des Incapacites au Postsecondaire. Project Adaptech.

    ERIC Educational Resources Information Center

    Fossey, Myrtis-Eirene; Fichten, Catherine S.; Barile, Maria; Asuncion, Jennison V.

    In 1999, a survey was conducted of almost 800 university students with different disabilities across Canada to investigate what computer equipment students used and wanted, how they financed their computer technologies, and why they failed to take advantage of government subsidy programs. Results from the survey indicate many students did not know…

  14. REFLECT: Logiciel de restitution des reflectances au sol pour l'amelioration de la qualite de l'information extraite des images satellitales a haute resolution spatiale

    NASA Astrophysics Data System (ADS)

    Bouroubi, Mohamed Yacine

    Multi-spectral satellite imagery, especially at high spatial resolution (finer than 30 m on the ground), represents an invaluable source of information for decision making in various domains in connection with natural resources management, environment preservation or urban planning and management. The mapping scales may range from local (finer resolution than 5 m) to regional (resolution coarser than 5m). The images are characterized by objects reflectance in the electromagnetic spectrum witch represents the key information in many applications. However, satellite sensor measurements are also affected by parasite input due to illumination and observation conditions, to the atmosphere, to topography and to sensor properties. Two questions have oriented this research. What is the best approach to retrieve surface reflectance with the measured values while taking into account these parasite factors? Is this retrieval a sine qua non condition for reliable image information extraction for the diverse domains of application for the images (mapping, environmental monitoring, landscape change detection, resources inventory, etc.)? The goals we have delineated for this research are as follow: (1) Develop software to retrieve ground reflectance while taking into account the aspects mentioned earlier. This software had to be modular enough to allow improvement and adaptation to diverse remote sensing application problems; and (2) Apply this software in various context (urban, agricultural, forest) and analyse results to evaluate the accuracy gain of extracted information from remote sensing imagery transformed in ground reflectance images to demonstrate the necessity of operating in this way, whatever the type of application. During this research, we have developed a tool to retrieve ground reflectance (the new version of the REFLECT software). This software is based on the formulas (and routines) of the 6S code (Second Simulation of Satellite Signal in the Solar Spectrum) and on the dark targets method to estimated the aerosol optical thickness, representing the most difficult factor to correct. Substantial improvements have been made to the existing models. These improvements essentially concern the aerosols properties (integration of a more recent model, improvement of the dark targets selection to estimate the AOD), the adjacency effect, the adaptation to most used high resolution (Landsat TM and ETM+, all HR SPOT 1 to 5, EO-1 ALI and ASTER) and very high resolution (QuickBird et Ikonos) sensors and the correction of topographic effects with a model that separate direct and diffuse solar radiation components and the adaptation of this model to forest canopy. Validation has shown that ground reflectance estimation with REFLECT is performed with an accuracy of approximately +/-0.01 in reflectance units (for in the visible, near-infrared and middle-infrared spectral bands) even for a surface with varying topography. This software has allowed demonstrating, through apparent reflectance simulations, how much parasite factors influencing numerical values of the images may alter the ground reflectance (errors ranging from 10 to 50%). REFLECT has also been used to examine the usefulness of ground reflectance instead of raw data for various common remote sensing applications in domains such as classification, change detection, agriculture and forestry. In most applications (multi-temporal change monitoring, use of vegetation indices, biophysical parameters estimation, etc.) image correction is a crucial step to obtain reliable results. From the computer environment standpoint, REFLECT is organized as a series of menus, corresponding to different steps of: input parameters introducing, gas transmittances calculation, AOD estimation, and finally image correction application, with the possibility of using the fast option witch process an image of 5000 by 5000 pixels in approximately 15 minutes. (Abstract shortened by UMI.)

  15. Extension de la méthode de Kármán-Pohlhausen aux régimes transitoires de convection libre, pour Pr>0,6

    NASA Astrophysics Data System (ADS)

    Polidori, Guillaume; Mladin, Emilia-Cerna; de Lorenzo, Thierry

    This work is devoted to the unsteady free laminar convection theory applied to a heated isoflux vertical plate by using the integral Kármán-Pohlhausen approach. To overcome complexities due to transient integral method, the analysis assumes that the ratio of both velocity and temperature layers is only Prandtl number dependent during the transient phase. Comparisons with results from the differential method seem to validate the proposed modeling which is carried out for the range Pr>0.6.

  16. ONU Geneve: quel avenir pour le francais? Silence, on coule! (ONU Geneva: What Future for French? Quiet, We're Sinking!)

    ERIC Educational Resources Information Center

    Lebreton, Jean-Michel; And Others

    1986-01-01

    Two articles address change and conflict concerning the French language. One discusses the comparative roles of English and French at the United Nations office in Geneva; the other is in response to the opinions of Philippe de Saint Robert on the need to protect French from change. (MSE)

  17. Decision Tools: What To Consider When Partnering for Learnware = Outils de decision: Facteurs a considerer dans la mise en place de partenariats pour les technologies d'apprentissage.

    ERIC Educational Resources Information Center

    Stahmer, Anna; Green, Lyndsay

    This report provides a set of decision tools for learnware developers in private companies, public organizations, and education institutions to use in developing strategic alliances or partnerships for the development, delivery, and marketing of learnware products and services designed to meet Canadians' lifelong learning needs. The report…

  18. Strategy for managing water in the Middle East and North Africa; Strategie pour la gestion de l`eau au moyen-orient et en afrique du nord

    SciTech Connect

    1995-07-01

    Water has always been of central concern to life in the Middle East and North Africa (MENA). Burgeoning populations are placing unprecendented pressures on the resource, calling urgently for new approaches to water planning and management if escalating conflicts are to be avoided and if environmental degradation is to be reversed. The booklet sets out the implications of the new Bank policy for the MENA region, calling for a concerted effort by government and Bank staff to address water resources in a coordinated and sustainable manner. It proposes a practical, step-by-step approach to achieving this objective that could lead to new Bank-supported operations to address the water sector as a whole.

  19. FORMAT: Canada's Computerized Information System for Audiovisual Materials = FORMAT: Un Systeme National d'Information Informatise pour les Produits Audiovisuels Canadiens.

    ERIC Educational Resources Information Center

    Bidd, Donald; And Others

    This report describes the development and operations of FORMAT, a Canadian database system designed to achieve comprehensive national bibliographic control of Canadian-produced audiovisual materials. FORMAT's developmental criteria are outlined, including its emphasis on Canadian-produced audiovisual documents, French/English bilingualism,…

  20. Canadian Journal for the Study of Adult Education = la Revue canadienne pour l'etude de l'education des adultes. 1987-1994.

    ERIC Educational Resources Information Center

    Canadian Journal for the Study of Adult Education, 1994

    1994-01-01

    These 17 issues include feature articles and perspectives on the study of adult education, as well as book reviews/recensions of works related to adult education. Some articles are written in English, and some are written in French. Among the feature articles included are the following: "The Fifties: Pivotal Decade in Canadian Adult Education"…

  1. Etude numerique et experimentale du phenomene de la transition en convection mixte dans le cas d'un tube vertical pour un nombre de Reynolds inferieur a 2000

    NASA Astrophysics Data System (ADS)

    Behzadmehr, Amin

    Combined forced and free convection (mixed convection) heat transfer for upward airflow through a vertical tube at relatively low Reynolds numbers was studied numerically and experimentally. The research focused on the axial and radial evolutions of hydrodynamic and thermal parameters of the flow field at Re < 2000, particularly on flow field transitions at such low Reynolds numbers. Therefore, a formulation based on Launder and Sharma Low Re k-epsilon turbulent model was proposed. Its main advantage is that it can predict laminar as well as turbulent flow fields. The elliptical form of the governing equations was also used in order to predict developing flow field parameters. The ability of the formulation and numerical procedure to predict the flow field characteristics was shown by comparison with experimental results. The calculated results were compared with experimental measurements that were found in the literature for very low Reynolds number (Re = 380) and high Reynolds number (Re = 5000). They were also compared with our experimental results at relatively low Reynolds number (Re = 1588). The calculated results for Re = 430, 1000 and 1500 established two critical Grashof numbers for which transitions occur (these transitions did not appear for Re = 430). At the first one (Gr ≈ 9 x 106 for Re = 1000 and Gr ≈ 2 x 106 for Re = 1500), the flow regime changes from laminar to turbulent. At the second critical point (Gr ≈ 5 x 107 for Re = 1000 and Gr ≈ 9 x 10 7 for Re = 1500), the flow regime comes back to laminar because of the accelerating effect of heating. Two flow reversal patterns were predicted and discussed. The first one includes the centerline while the second one occurs between the tube axis and the wall. In spite of the analytical solution by Hallman (1956), which confirms the existence of the second one, it had not been predicted numerically before. An experimental apparatus was designed and built to study the flow field transitions and their structure. FFT spectra of the temperature fluctuations and the velocity fluctuations indicator determined the critical Grashof numbers for which the flow field changes from laminar to turbulent. These critical Grashof numbers are 3.78 x 106, 1.09 x 10 6, and 3.81 x 105 corresponding to Re ≈ 1000, Re ≈ 1300 and Re ≈ 1600. The most important thermal fluctuations oscillate with f = 0.45Hz and its multiples while the velocity fluctuations oscillate with f = 1.8Hz (which is also a multiple of f = 0.45Hz) and its multiples.

  2. Une Planche de Salut pour le Francais: le Francais Quotidien et les Niveaux de Langue (A Last Resort for French: Everyday French and Language Levels)

    ERIC Educational Resources Information Center

    Jonas, Maurice

    1977-01-01

    Before asking how to teach French, one should ask what French to teach. It is suggested that everyday French, "la langue usuelle," should be the norm for American teachers and textbook writers and editers. Greater utilization of film scenarios and songs of good quality are among the means suggested. (Text is in French.) (AMH)

  3. Le Niveau-Seuil Peut-Il Renouveler la Conception des Cours Audiovisuels pour Debutants? (Can a Threshold Level Renew the Concept of Audiovisual Courses for Beginners?)

    ERIC Educational Resources Information Center

    Courtillon-Leclercq, Janine; Papo, Eliane

    1977-01-01

    An attempt to show that a threshold level would furnish conditions for a renewed methodology and greater student creativity. The acquisition of communicative competence would be constructed around two types of activities: analysis of the conditions of speech production and systematization of two levels of grammar. (Text is in French.) (AMH)

  4. L'elaboration d'un cours de Latin specialise pour des etudiants de theologie (The Development of a Specialized Latin Course for Theology Students).

    ERIC Educational Resources Information Center

    Meijers, A. J. A.

    1980-01-01

    Reviews literature in applied linguistic and reading methodology and outlines a suffix-grammar as it is used in a reading course in Latin. The principles of the grammar are discussed and an example of its application in the reading course is given. (Author/AMH)

  5. Quels documents video... pour les cours de francais de specialite (Which Video Documents...for Courses in French for Special Purposes).

    ERIC Educational Resources Information Center

    Le Ninan, Claude

    1992-01-01

    It is proposed that video materials for French language instruction help illustrate two closely related aspects of the foreign language, linguistic and cultural. Guidelines for video materials selection are offered, common pitfalls are noted, and principles used by a French applied linguistics group to develop a series of materials are outlined.…

  6. Considerations psycho-socio-linguistiques sur la conception des programmes de cours pour etudiants etrangers (Psycholinguistic and Sociolinguistic Considerations on the Development of Language Programs for Foreign Students).

    ERIC Educational Resources Information Center

    James, Ken

    1981-01-01

    Discusses psycholinguistic and sociolinguistic questions relevant to the development of language programs for foreigners, such as student motivation, language aptitude, learning styles, cultural differences, language styles, and communicative competence. Focuses particularly on the cultural problems faced by a foreigner, as a student, client, and…

  7. Vers une norme pour un cours de phonetique francaise au Canada (Towards a Norm for a Course in French Phonetics in Canada).

    ERIC Educational Resources Information Center

    Cox, Terry B.

    1998-01-01

    Proposes a model for a French phonetics course in Canada based on Canadian usage, using an inventory of segmental features in published descriptions of Canadian French that has been modified based on comparison with features common to television news readers. The resulting model is of an unstigmatized Canadian French. (Author/MSE)

  8. Bactériophages et phagothérapie: utilisation de virus naturels pour traiter les infections bactériennes

    PubMed Central

    Ravat, F.; Jault, P.; Gabard, J.

    2015-01-01

    Summary L’utilisation des bactériophages, prédateurs naturels des bactéries, est une technique pionnière efficace de lutte contre les infections bactériennes. Tombée dans l’oubli depuis un demi-siècle du coté occidental de l’ex-rideau de fer, elle fait toujours partie de l’arsenal thérapeutique des pays de l’ex-Europe de l’Est, au point de constituer une arme de choix dans la politique de santé publique de ces pays. l’émergence de bactéries multirésistantes et le risque de revenir à l’ère pré-antibiotique ont fait ressortir la phagothérapie de l’oubli injuste auquel elle avait été confinée. la biologie et la place du bactériophage dans la nature sont décrites ici. les tenants et les aboutissants de la phagothérapie et les conditions de son retour sur le devant de la scène sont explicitées. PMID:26668557

  9. Delivering the Future: The Mock Job Fair Handbook = Realiser L'Avenir: Guide pour la Simulation d'un Salon de L'emploi.

    ERIC Educational Resources Information Center

    Federal Bureau of Prisons (Dept. of Justice), Washington, DC.

    This document, in both English and French, is a guide to planning and conducting mock job fairs for inmates at federal correctional institutions. The following topics are discussed: understanding the nature and purpose of job fairs; planning a job fair; establishing a time and date; gaining approval for the fair; contacting area employers;…

  10. Evaluation de l'impact du vent et des manoeuvres hydrauliques sur le calcul des apports naturels par bilan hydrique pour un reservoir hydroelectrique

    NASA Astrophysics Data System (ADS)

    Roy, Mathieu

    Natural inflow is an important data for a water resource manager. In fact, Hydro-Quebec uses historical natural inflow data to perform a daily prediction of the amount of water that will be received in each of its hydroelectric reservoirs. This prediction allows the establishment of reservoir operating rules in order to optimize hydropower without compromising the safety of hydraulic structures. To obtain an accurate prediction, it follows that the system's input needs to be very well known. However, it can be very difficult to accurately measure the natural supply of a set of regulated reservoirs. Therefore, Hydro-Quebec uses an indirect method of calculation. This method consists of evaluating the reservoir's inflow using the water balance equation. Yet, this equation is not immune to errors and uncertainties. Water level measurement is an important input in order to compute the water balance equation. However, several sources of uncertainty including the effect of wind and hydraulic maneuvers can affect the readings of limnimetric gages. Fluctuations in water level caused by these effects carry over in the water balance equation. Consequently, natural inflow's signal may become noisy and affected by external errors. The main objective of this report is to evaluate the uncertainty caused by the effects of wind and hydraulic maneuvers on water balance equation. To this end, hydrodynamic models of reservoirs Outardes 4 and Gouin were prepared. According to the literature review, wind effects can be studied either by an unsteady state approach or by assuming steady state approach. Unsteady state simulation of wind effects on reservoir Gouin and Outardes 4 were performed by hydrodynamic modelling. Consideration of an unsteady state implies that the wind conditions vary throughout the simulation. This feature allows taking into account temporal effect of wind duration. In addition, it also allows the consideration of inertial forces such as seiches which are caused by wind conditions that can vary abruptly. Once the models were calibrated, unsteady state simulations were conducted in closed system where unsteady observed winds were the only forces included. From the simulated water levels obtained at each gage, water balance equation was calculated to determine the daily uncertainty of natural inflow in unsteady conditions. At Outardes 4, a maximum uncertainty of 20 m3/s was estimated during the month of October 2010. On the other hand, at the Gouin reservoir, a maximum uncertainty of 340m3/s was estimated during the month of July 2012. Steady state modelling is another approach to evaluate wind effect uncertainty in the water balance equation. This type of approach consists of assuming that the water level is instantly tilted under the influence of wind. Hence, temporal effect of wind duration and seiches cannot be taken into account. However, the advantage of steady state modelling is that it's better suited than unsteady state modelling to evaluate wind uncertainty in real time. Two steady state modelling methods were experimented to estimate water level difference between gages in function of wind characteristics: hydrodynamic modelling and non-parametric regression. It has been found that non-parametric models are more efficient when it comes to estimate water level differences between gages. However, the use of hydrodynamic model demonstrated that to study wind uncertainty in the water balance equation, it is preferable to assess wind responses individually at each gage instead of using water level differences. Finally, a combination method of water level gages observations has been developed. It allows reducing wind/hydraulic maneuvers impacts on the water balance equation. This method, which is applicable in real time, consists of assigning a variable weight at each limnimetric gages. In other words, the weights automatically adjust in order to minimize steady state modeled wind responses. The estimation of hydraulic maneuvers has also been included in the gage weight adjustment. It has been found that this new combination method allows the correction of noisy natural inflow signal under wind and hydraulic maneuvers effects. However, some fluctuations persist which reflects the complexity of correcting these effects on a real time based daily water balance equation. (Abstract shortened by UMI.).

  11. Strategy for the forest sector in sub Saharan Africa. World Bank technical paper; Strategie pour le secteur forestier en afrique subsaharienne

    SciTech Connect

    Sharma, N.P.; Rietbergen, S.; Heimo, C.R.; Patel, J.

    1995-12-31

    Forest resources in Sub-Saharan Africa are disappearing at an alarming rate--the region witnessed a seven percent loss of its forest cover during the 1980s. The deforestation of tropical rain forests in West and Central Africa is occurring at a rate of two million hectares each year. The poor usually suffer the most in the short run--but it is the entire world community that suffers in the long run from the ensuing ecological damage. This strategy paper is one element of the World Bank`s process of addressing environmental issues and challenges. The paper adheres to the Bank`s forest policy adopted in 1991, which reaffirms the Bank`s support for conservation and sustainable development of forest resources. The authors emphasize the importance of the symbiosis of forest resource management and socioeconomic development for the region.

  12. Optimisation des trajectoires d'un systeme de gestion de vol d'avions pour la reduction des couts de vol

    NASA Astrophysics Data System (ADS)

    Sidibe, Souleymane

    The implementation and monitoring of operational flight plans is a major occupation for a crew of commercial flights. The purpose of this operation is to set the vertical and lateral trajectories followed by airplane during phases of flight: climb, cruise, descent, etc. These trajectories are subjected to conflicting economical constraints: minimization of flight time and minimization of fuel consumed and environmental constraints. In its task of mission planning, the crew is assisted by the Flight Management System (FMS) which is used to construct the path to follow and to predict the behaviour of the aircraft along the flight plan. The FMS considered in our research, particularly includes an optimization model of flight only by calculating the optimal speed profile that minimizes the overall cost of flight synthesized by a criterion of cost index following a steady cruising altitude. However, the model based solely on optimization of the speed profile is not sufficient. It is necessary to expand the current optimization for simultaneous optimization of the speed and altitude in order to determine an optimum cruise altitude that minimizes the overall cost when the path is flown with the optimal speed profile. Then, a new program was developed. The latter is based on the method of dynamic programming invented by Bellman to solve problems of optimal paths. In addition, the improvement passes through research new patterns of trajectories integrating ascendant cruises and using the lateral plane with the effect of the weather: wind and temperature. Finally, for better optimization, the program takes into account constraint of flight domain of aircrafts which utilize the FMS.

  13. INTERIOR VIEW, LOOKING NORTH, CUPOLA AREA WITH MOLTEN METAL BEING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW, LOOKING NORTH, CUPOLA AREA WITH MOLTEN METAL BEING POURED OUT OF THE CUPOLA INTO THE POURING LADLE. FROM THE POURING LADLE, THE IRON IS LATER POURED INTO A TRANSFER LADLE FOR TRANSPORT TO THE CASTING MACHINES. - McWane Cast Iron Pipe Company, Pipe Casting Area, 1201 Vanderbilt Road, Birmingham, Jefferson County, AL

  14. Choice for All: Proceedings of the International Conference of the Association for the Advancement of Rehabilitation Technology = Choix pour tous: Conference internationale pour le developpement de la technologie en readaptation (3rd, Montreal, Quebec, Canada, June 25-30, 1988). ICAART Volume III.

    ERIC Educational Resources Information Center

    RESNA: Association for the Advancement of Rehabilitation Technology, Washington, DC.

    These proceedings were composed of 290 papers, submitted by 700 authors from 15 countries, in the field of rehabilitation engineering and technology. Of the 290 papers, 13 are written in French. Papers are generally two to four pages in length, and are organized within the following areas of rehabilitation technology: service delivery practice (15…

  15. Choice for All: ICAART 88. Proceedings of the International Conference of the Association for the Advancement of Rehabilitation Technology (Montreal, Canada, June 25-30, 1988). Volume III = Choix pour tous: ICAART 88. Compte rendu conference internationale pour le developpement de la technologie en readaptation (Montreal, Canada, Juin 25-30, 1988).

    ERIC Educational Resources Information Center

    RESNA: Association for the Advancement of Rehabilitation Technology, Washington, DC.

    In these proceedings are compiled 290 papers from 15 countries, demonstrating applications of rehabilitation engineering and technology. The 16 Special Interest Groups of the Association for the Advancement of Rehabilitation Technology (RESNA) present papers in the following interest areas: Service Delivery Practice, Personal Transportation,…

  16. Access to College for All: ITAC Project--Computer and Adaptive Computer Technologies in the Cegeps for Students with Disabilities = L'accessibilite au cegep pour tous: Projet ITAC--informatique et technologies adaptees dans les cegeps pour les etudiants handicapes.

    ERIC Educational Resources Information Center

    Fichten, Catherine S.; Barile, Maria

    This report discusses outcomes of three empirical studies which investigated the computer and adaptive computer technology needs and concerns of Quebec college students with various disabilities, professors, and individuals responsible for providing services to students with disabilities. Key findings are highlighted and recommendations are made…

  17. Les Sciences Physiques À L'école Maternelle: Un Cadre Sociocognitif Pour La Construction Des Connaissances ET/OU LE Développement Des Activités Didactiques

    NASA Astrophysics Data System (ADS)

    Ravanis, Konstantinos

    2005-05-01

    NATURAL SCIENCES IN KINDERGARTEN: A SOCIO-COGNITIVE FRAMEWORK FOR LEARNING AND TEACHING - The present study presents a socio-cognitive framework for the construction of the scientific knowledge of natural phenomena among pre-school children and for the development of science activities at kindergarten. It involves elements from theories of social interaction; social psychology of development and cognitive functioning; and research in natural-science teaching methods which acknowledge the importance and fundamental role of social interaction in the development of cognitive operations and learning. The study also presents some of the more significant results of the research carried out on different aspects of this topic. The discussion unfolded here supports the hypothesis that the construction of natural-scientific knowledge at the pre-school age and corresponding scholastic activities are necessary and effective.

  18. A Qualitative Case Study Approach To Examine Information Resources Management. (Utilisation d'une Approche Qualitative par Methode de cas pour Etudier la Gestion des Ressources D'information).

    ERIC Educational Resources Information Center

    Bergeron, Pierrette

    1997-01-01

    Illustrates how a qualitative approach was used to study the complex and poorly defined concept of information resources management. Explains the general approach to data collection, its advantages and limitations, and the process used to analyze the data. Presents results, along with lessons learned through using method. (Author/AEF)

  19. Présentation de l’adaptation française de « l’échelle de coparentage » de McHale pour familles avec jeunes enfants

    PubMed Central

    Frascarolo, F.; Dimitrova, N.; Zimmermann, G.; Favez, N.; Kuersten-Hogan, R.; Baker, J.; McHale, J.

    2009-01-01

    Le but de cet article est de présenter l’autoquestionnaire américain de McHale permettant l’évaluation de la qualité du coparentage ainsi qu’un premier pas en direction de sa validation structurelle et de construit en langue française. Quarante et une familles suisses francophones et 84 familles nord-américaines ont rempli ce questionnaire ainsi qu’un autre portant sur leur satisfaction conjugale (Dyadic Adjustment Scale [DAS]). Les résultats des familles suisses correspondent aux résultats américains : d’une part, la distribution des items en quatre facteurs (intégrité familiale, conflit, affection et dénigrement) est retrouvée et, d’autre part, un lien relatif entre la qualité du coparentage et celle des relations conjugales est observé. Ce deuxième résultat confirme la validité de construit du questionnaire, vu le lien reconnu entre ces deux sous-systèmes. Étant donné l’influence de la qualité du coparentage sur le développement socio-affectif de l’enfant, disposer d’un outil permettant son évaluation, dans ses aspects tant positifs (soutien, chaleur, etc.) que négatifs (dénigrement, conflit, etc.), est un atout important aussi bien en recherche qu’en clinique. PMID:19655028

  20. Education for All: Is the World on Track? Summary Report. EFA Global Monitoring Report, 2002 = Education pour Tous: Le Monde Est-Il sur la Bonne Voie? Resume du Rapport. Rapport Mondial de Suivi sur l'EPT, 2002.

    ERIC Educational Resources Information Center

    Colclough, Christopher; Packer, Steve; Ellis, Simon; Van Ravens, Jan; Barry, Ulrika Peppler; Bella, Nicole; Djioze, Valerie; Mputu, Hilaire; Aggio, Carlos; Cifuentes-Montoya, Mariana; Pinceau, Pascale; Nsengimana, Delphine

    In 2000 the World Education Forum, sponsored by UNESCO, met to assess and act on educational opportunities for children, youth, and adults around the world. The forum agreed on six goals for education considered to be essential, attainable, and affordable, given strong international commitment and resolve, and on a program called Education for All…

  1. Le Droit de Votre Enfant a une Education: Un Guide pour les Parents d'Enfants Handicapes de l'Etat de New York (Your Child's Right to an Education: A Guide for Parents of Handicapped Children in New York).

    ERIC Educational Resources Information Center

    New York State Education Dept. Albany. Office for the Education of Children with Handicapping Conditions.

    The handbook is a French translation of "Your Child's Right to an Education" published by the New York State Education Department, Office for Education of Children with Handicapping Conditions. The following topics are among those considered: eligibility for special education, program types, alternative placements (such as residential settings),…

  2. Biosimilars: from technical to pharmacoeconomic considerations. 30th Rencontres Nationales de Pharmacologie et Recherche clinique pour l'Innovation et l'Evaluation des Technologies de Santé. Tables rondes.

    PubMed

    Girault, Danièle; Trouvin, Jean-Hugues; Blachier-Poisson, Corinne; Gary, François; Laloye, Didier; Bergmann, Jean-François; Casadevall, Nicole; Delval, Cécile; De Sahb Berkovitch, Rima; Fagon, Jean-Yves; Gersberg, Marta; Lassale, Catherine; Lechat, Philippe; Le Jeunne, Claire; Montastruc, Jean-Louis; Prugnaud, Jean-Louis; Ratignier-Carbonneil, Christelle; Rey-Coquais, Cécile

    2015-01-01

    A biosimilar is a biological medicinal product claimed to be similar to a reference biological medicinal product. Its development plan includes studies comparing it with the reference product in order to confirm its similarity in terms of quality, preclinical safety, clinical efficacy, and clinical safety, including immunogenicity. Biosimilars differ from generics both in their molecular complexity and in the specific requirements that apply to them. Since patents on many biological medicinal products will expire within the next 5 years in major therapeutic areas such as oncology, rheumatology and gastroenterology and as those products are so costly to the French national health insurance system, the availability of biosimilars would have a considerable economic impact. The round table has issued a number of recommendations intended to ensure that the upcoming arrival of biosimilars on the market is a success, in which prescribing physicians would have a central role in informing and reassuring patients, an efficient monitoring of the patients treated with biologicals would be set up and time to market for biosimilars would be speeded up. PMID:25679193

  3. Une étude cas-témoins pour déterminer les facteurs de non-observance du suivi médical chez les patients diabétiques à Kinshasa, en 2010

    PubMed Central

    Mense, Kennedy; Mapatano, Mala Ali; Mutombo, Paulin Beya; Muyer, Marie Claire

    2014-01-01

    Introduction Le diabète est un problème majeur de santé publique et un fardeau économique mondial qui n’épargne pas la RD-Congo. Bien que sa prise en charge soit codifiée, la plupart des diabétiques n'arrivent pas à respecter les rendez-vous de suivi. Cette étude vise principalement à identifier les déterminants de la non-observance du suivi médical chez les diabétiques à Kinshasa. Méthodes Il s'agit d'une étude cas-témoins où les cas sont les patients diabétiques non observant le suivi médical et les témoins, ceux répondant régulièrement au suivi médical. Couvrant la période du 1erjanvier au 31 décembre 2010, l’étude a porté sur un échantillon aléatoire de 154 sujets répartis entre 77 cas et 77 témoins. Résultats Les données indiquent une association entre la non-observance du suivi médical et le revenu (niveau de vie) des ménages. Les cas provenant des ménages à faible revenu courent six fois plus le risque d’être non-observants. Par contre, entre le niveau de connaissance et la non-observance l'association notée n’était pas statistiquement significative. Le respect des rendez-vous pourrait être amélioré de 77% si le revenu des ménages des diabétiques était augmenté. Le coût total mensuel du suivi médical est estimé à 27,2 USD, alors que le revenu permanant des ménages se situe à 306,6 USD. Conclusion Le bas niveau de vie mais pas celui de l'ignorance est un déterminant de la non-observance des visites de suivi du malade diabétique. PMID:25309658

  4. Non-contact laser speckle sensor for measuring one- and two-dimensional angular displacement Capteur non-contact de laser speckle pour mesurer le déplacement angulaire à une ou deux dimensions

    NASA Astrophysics Data System (ADS)

    Rose, Bjarke; Imam, Husain; Hanson, Steen G.

    1998-06-01

    A novel method for measurement of angular displacement in one or two dimensions for arbitrarily shaped objects is presented. The method is based on Fourier transforming the scattered field from a single laser beam that illuminates the target. The angular distribution of the light field at the target is linearly mapped onto an array image sensor placed in the Fourier plane. Measuring this displacement facilitates the determination of the angular displacement. It is demonstrated both theoretically and experimentally that the angular displacement sensor is insensitive to object shape, target distance and any longitudinal or transverse movement of the target, if the image sensor is placed in the Fourier plane. A straightforward procedure to place the image sensor in the Fourier plane is presented here. Theoretically and experimentally, it is shown that the method has a resolution of 0.3 mdeg for small angular displacements, and methods for further improvement in resolution are discussed. No special surface treatment is required for surfaces having irregularities of the order of or larger than the wavelength of the incident light. It is shown that this is the case for most surfaces of practical interest. Furthermore, it is shown that robust, non-contact optical systems for industrial applications can be produced.

  5. Une methode statistique pour le controle des changements vocaliques sous l'effet du style de parole. Applications a l'espagnol (A Statistical Method for the Control of Vocalic Changes Affected by Speaking Style. Applications to Spanish).

    ERIC Educational Resources Information Center

    Harmegnies, Bernard; Huet, Kathy; Poch-Olive, Dolors

    2001-01-01

    Speech conditions of emission can result in influences on the speaker, leading to dramatic changes in the speaker's speech production. However, most studies performed on the "speaking styles" restrict their observations to very contrasted situations and compare so-called "spontaneous" speech to the "laboratory" speech. This study analyzed Spanish…

  6. Conception d'un controleur actif pour le retard de la transition de l'ecoulement laminaire au turbulent sur une aile a geometrie du profil variable dans le tunnel a vent

    NASA Astrophysics Data System (ADS)

    Popov, Andrei Vladimir

    The aerospace industry is motivated to reduce fuel consumption in large transport aircraft, mainly through drag reduction. The main objective of the global project is the development of an active control system of wing airfoil geometry during flight in order to allow drag reduction. Drag reduction on a wing can be achieved through modifications in the laminar-to-turbulent flow transition point position, which should be situated as close as possible to the trailing edge of the airfoil wing. As the transition point plays a crucial part in this project, this work focuses on the control of its position on the airfoil, as an effect of controlling the deflection of a morphing wing airfoil equipped with a flexible skin. The paper presents the modeling and the experimental testing of the aerodynamic performance of a morphing wing, starting from the design concept phase all the way to the bench and wind tunnel tests phases. Several wind tunnel test runs for various Mach numbers and angles of attack were performed in the 6 x 9 ft2 wind tunnel at the Institute for Aerospace Research at the National Research Council Canada. A rectangular finite aspect ratio wing, having a morphing airfoil cross-section due to a flexible skin installed on the upper surface of the wing, was instrumented with Kulite transducers. The Mach number varied from 0.2 to 0.3 and the angle of attack between -1° and 2°. Unsteady pressure signals were recorded and analyzed and a thorough comparison, in terms of mean pressure coefficients and their standard deviations, was performed against theoretical predictions, using the XFoil computational fluid dynamics code. The acquired pressure data was analyzed through custom-made software created with Matlab/Simulink in order to detect the noise magnitude in the surface airflow and to localize the transition point position on the wing upper surface. This signal processing was necessary in order to detect the Tollmien-Schlichting waves responsible for triggering the transition from laminar to turbulent flow. The flexible skin needed to morph its shape through two actuation points in order to obtain an optimized airfoil shape for several flow conditions in the wind tunnel. The two shape memory alloy actuators, having a non-linear behavior, drove the displacement of the two control points of the flexible skin towards the optimized airfoil shape. This thesis presents the methodology used and the results obtained from designing the controller of the two shape memory actuators as well as the methods used for morphing wing control in the wind tunnel tests designed to prove the concept and validity of the system in real time. Keywords: wing, morphing, laminar, turbulent, transition, control, wind tunnel

  7. Proceedings of the Annual Conference of the Canadian Association for the Study of Adult Education/L'Association Canadienne pour L'Etude de L'Education des Adultes (17th, Ontario, Canada, May 29-31, 1998).

    ERIC Educational Resources Information Center

    Taylor, Maurice, Ed.

    These proceedings on the theme, Adult Education Research: Shaping the Future, contain 52 papers. The papers are: "Virtual Adult Education" (W. Archer and D. Conrad); "Reversal Theory Approach to Adult Learning and Education" (M. Atleo); "Objectiver L'Action" (A. Balleux et al.); "Cultural Constructions of Literacy" (A. Blunt); "Prior Learning…

  8. Enseigner aux eleves ayant des troubles emotionnels et (ou) des psychopathologies. Elabore pour les eleves ayant des besoins speciaux (Teaching Students with Emotional Disorders and/or Mental Illnesses. Elaborated for Eligible Special Needs Students).

    ERIC Educational Resources Information Center

    Alberta Learning, Edmonton. Direction de l'education francaise.

    This resource manual, in French, is designed to assist Alberta teachers in the identification and education of students with emotional disorders and/or mental illnesses. It takes a comprehensive look at six emotional disorders. The first section focuses on eating disorders. It describes the characteristics and symptoms of anorexia nervosa, bulimia…

  9. Nouvelle methode pour les etudes des interactions aeroservoelastiques en boucle ouverte sur les avions F/A-18, CL-604 et ATM et en boucle fermee sur l'ATM

    NASA Astrophysics Data System (ADS)

    Dinu, Alin Dorian

    2006-04-01

    Nous avons concu, implemente puis valide une nouvelle methode d'approximation des forces aerodynamiques non stationnaires a l'aide des polynomes orthogonaux de Chebyshev. Cela represente une contribution originale dans l'analyse des interactions aeroservoelastiques. La premiere serie de resultats obtenus par cette nouvelle methode (erreurs d'approximation des forces aerodynamiques non stationnaires) est comparee avec les resultats des methodes LS et de Pade. La deuxieme serie de resultats (vitesses et frequences de battement obtenues avec cette nouvelle methode) est comparee avec celles obtenues par les methodes classiques LS et de Pade. Ces deux series de resultats obtenus par notre methode et par les deux methodes classiques LS et de Pade sont validees sur trois types differents d'avions: l'ATM (Aircraft Test Model), le F/A-18 en collaboration avec les laboratoires de la NASA Dryden Flight Research Center, et enfin le Challenger CL-604 de Bombardier Aeronautique.

  10. L'utilisation de la polarimetrie radar et de la decomposition de Touzi pour la caracterisation et la classification des physionomies vegetales des milieux humides : le cas du lac Saint-Pierre

    NASA Astrophysics Data System (ADS)

    Gosselin, Gabriel

    Wetlands fill many important ecological functions and contribute to the biodiversity of fauna and flora. Although there is a growing recognition of the importance to protect these areas, it remains that their integrity is still threatened by the pressure of human activities. The inventory and the systematic monitoring of wetlands are a necessity and remote sensing is the only realistic way to achieve this goal. The primary objective of this thesis is to contribute and improve the wetland characterization using satellite polarimetric data acquired in L (ALOS-PALSAR) and C (RADARSAT-2) band. This thesis is based on two hypotheses (Ch. 1). The first hypothesis stipulate that classes of plant physiognomies, based on plant structure, are more appropriate than classes of plant species because they are best adapted to the information content of polarimetric radar data. The second hypothesis states that polarimetric decomposition algorithms allow an optimal extraction of polarimetric information compared to a multi-polarized approach based on the HH, HV and VV channels (Ch. 3). In particular, the contribution of the incoherent Touzi decomposition for the inventory and monitoring of wetlands is examined in detail. This decomposition allows the characterization of the scattering type, its phase, orientation, symmetry, degree of polarization and the backscattered power of a target with a series of parameters extracted from an analysis of the coherency matrix eigenvectors and eigenvalues. The lake Saint-Pierre region was chosen as the study site because of the great diversity of its wetlands that are covering more than 20 000 ha. One of the challenges posed by this thesis is that there is neither a standard system enumerating all the possible physiognomic classes nor an accurate description of their characteristics and dimensions. Special attention was given to the creation of these classes by combining several data sources and more than 50 plant species were grouped into nine physiognomic classes (Ch. 7, 8 and 9). Several analyzes are proposed to validate the hypotheses of this thesis (Ch. 9). Sensitivity analysis using scatter plots are performs to study the characteristics and dispersion of plant physiognomic classes in various features space consisting of polarimetric parameters or polarization channels (Ch. 10 and 12). Time series of made of RADARSAT-2 images are used to deepen the understanding of the seasonal evolution of plant physiognomies (Ch. 12). The transformed divergence algorithm is used to quantify the separability between physiognomic classes and to identify the parameters (s) that contribute the most to their separability (Ch. 11 and 13). Classifications are also proposed and the results compared to an existing map of the lake Saint-Pierre wetlands (Ch. 14). Finally, an analysis of the potential of polarimetric parameters in C and L-band is proposed for the monitoring of peatlands hydrology (Ch. 15 and 16). Sensitivity analyses show that the parameters of the 1st component, relative to the dominant (polarized) part of the signal, are sufficient for a general characterization of plant physiognomies. The parameters of the second and third components are, however, needed for better class separability (Ch. 11 and 13) and a better discrimination between wetlands and uplands (Ch. 14). This thesis shows that it is preferable to consider individually the parameters of the 1st, 2nd and 3rd components rather than their weighted sum by their respective eigenvalues (Ch. 10 and 12). This thesis also examines the complementarity between the structural parameters and those related to the backscattered power, often ignored and normalized by most polarimetric decomposition. (Abstract shortened by UMI.)

  11. The Development of a Taxonomy of the Life Skills Required to Become a Balanced Self-Determined Person = Essaie de Classification des Competences Necessaires pour Devenir une Personne Autonome et Bien Equilibree.

    ERIC Educational Resources Information Center

    Smith, Paul

    Intended for use by life skills coaches and students, program evaluators, and individuals developing lesson plans and other training materials, this taxonomy includes all of the terminal performance behaviors and corresponding sub-skills required to become and function as a balanced, self-determined person who manages the problems of everyday life…

  12. Hand-held triangulation laser profilometer with audio output for blind people Profilométre laser à triangulation tenu en main avec sortie sonare pour non-voyants

    NASA Astrophysics Data System (ADS)

    Farcy, R.; Damaschini, R.

    1998-06-01

    We describe a device currently under industrial development which will give to the blind a means of three-dimensional space perception. It consists of a 350 g hand-held triangulating laser telemeter including electronic parts and batteries, with auditory feedback either inside the apparatus or close to the ear. The microprocessor unit converts in real time the distance measured by the telemeter into a musical note. Scanning the space with an adequate movement of the hand produces musical lines corresponding to the profiles of the environment. We discuss the optical configuration of the system relative to our first year of clinical experimentation.

  13. Barrier-Free Design: Access to and Use of Buildings by Physically Disabled People = Amenagement pour Acces Facile: Acces Facile aux Immeubles et Leur Utilisation par les Personnes Handicapees.

    ERIC Educational Resources Information Center

    Public Works Canada, Ottawa (Ontario).

    The manual describes, for people with physical disabilities, a building standard of accessibility and the policy for its application. Policies address both new construction and renovation work based on principles of building accessibility to a broad range of users, public service accessibility, and equality of access to employment opportunities.…

  14. Le δ13C des grains de pollen : intérêt pour l'étude des paléovégétationsCarbon isotopic ratios of pollen: interest for palaeovegetations reconstructions

    NASA Astrophysics Data System (ADS)

    Descolas-Gros, Chantal; Calleja, Michel; Cour, Pierre; Richard, Paul; Perruchietti, Christiane; Jame, Patrick

    2001-06-01

    δ13C values of pollen grains belonging to different plant species (trees, herbaceous no poaceae, poaceae) were measured. Most of these temperate species are C3 plants with δ13C values between -28.6 ‰ and -21.7 ‰, the C4 plants have more positive values between -15.9 ‰ and -10 ‰. These results corroborate the interest of such measurements to differentiate C4 poaceae from C3 ones. Inside the same genus or the same species data variability is studied. Chemical treatment (acetolysis) of pollen grains induces a lowering of the values. These preliminary results are intended to help calibrate the pollen grains δ13C of modern plants in order to use δ13C of fossil pollen grains to reconstruct palaeovegetation variability responses to climatic factors.

  15. Directives Relatives a l'Elaboration de Programmes de Conseil en Gestion pour Petites Entreprises (Guidelines for Management Consulting Programs for Small-Scale Enterprise). Appropriate Technologies for Development. Peace Corps Information Collection & Exchange Manual Series No. M-29.

    ERIC Educational Resources Information Center

    Vaughan, Gary L.

    Written in French, this manual is designed to assist management consultants in working with small-scale entrepreneurs in developing countries. Addressed in an overview of the small-scale enterprise (SSE) are the role of the SSE in Third World development, problems of SSEs, and target firms. The second chapter deals with various forms of management…

  16. Un Test contrastif oral pour l'evaluation des difficultes lexicales dans l'apprentissage de l'anglais L2 (An Oral Contrastive Test for the Evaluation of Lexical Difficulties in Learning English as a Second Language).

    ERIC Educational Resources Information Center

    Haeusser, Christiane

    1978-01-01

    The test described here is a particular type of diagnostic test; it is part of a series of tests designed to explore systematically areas of potential lexical difficulty in the English language for French-speaking students of English. The lexical units are considered under their formal, morphological, syntactic and semantic aspects. The test has…

  17. Elaboration d'un didacticiel pour l'enseignement de l'intonation en francais langue etrangere (Explanation of a Computer Program for Teaching Intonation in French as a Foreign Language). Publication B-196.

    ERIC Educational Resources Information Center

    Knoerr, Helene

    This report discusses the teaching of French intonation through computerized instruction. In particular, the development of a computer program for teaching French intonation is described and explained. The first part of the report examines the role of oral language instruction in French, including a history and overview of methodologies. The…

  18. Education for AIDS Prevention: Bibliography--Supplement No. 1=Education pour la prevention du SIDA: Bibliographie--Supplement No. 1=Educacion para la Prevencion del SIDA: Bibliografia--Suplemento No. 1.

    ERIC Educational Resources Information Center

    United Nations Educational, Scientific, and Cultural Organization, Paris (France). Documentation and Information Service.

    This supplement to the Education for AIDS Prevention Bibliography provides a list of titles received by ASERC (AIDS School Education Resource Centre) from August 1991 to December 1992, consisting mainly of educational material for schools. It also includes documents of a more general nature on AIDS and AIDS prevention. ASERC is a documentation…

  19. Amelioration de la compressibilite d'une nouvelle poudre d'acier a outils pour l'amelioration de la resistance a l'usure a haute temperature de pieces automobiles

    NASA Astrophysics Data System (ADS)

    Sioui-Latulippe, Olivier

    The general objective of this project is to improve the compressibility of the TS4 powder to1) increase the amount of TS4A7 powder in the mixes or to 2) increase the density of the parts. Improving the compressibility of the TS4 powder should increase the most important mechanical properties of the parts for the aimed application (hot hardness and wear resistance). The TS4 powder is a tool steel that Philippe Beaulieu [1] developed for his Ph.D.. Parts made with this powder help to reduce production costs (raw materials and process) in comparison with competitors materials. Furthermore, Beaulieu showed that the mechanical properties of the parts made with the mix he conceived specifically for the TS4 powder (LMO mix) are better or similar to those of mixes currently used for the same application (valve seat inserts - VSI). An annealing heat treatment was developed and optimized (HT45opt ) in order to reduce the hardness of the TS4A7 particles and thus increase their compressibility. Designs of experiments were carried out to determine the group of annealing parameters that optimizes the hardness and the friability of the cake after annealing. The duration of the heat treatment and the nature of the protective gas were also taken into account. The thermal profile consists of 1) a first dwell at temperature T1 and a dwelling time of t1, 2) a controlled cooling rate named Delta and 3) a second dwell at temperature T2 and a dwelling time of t2. The values of the parameters of the optimized heat treatment are as follow: T1=1080°C, t1=1h, Delta=300°C/h, T2=720°C, T2=2h, atmosphere=argon. The microhardness of the annealed powder is 438HV0.025 with a standard deviation of 22. Metallurgical bonds are created between the particles during annealing. These bonds are strong enough to make the particles act like a solid. This solid is called a cake. The cake was milled with a disk mill to transform the cake back into a powder. Observations showed that this milling technique does not eliminate all the bonds created during annealing. Thus, small particles (10mum) are still bonded to the coarser particles (50mum) after milling the cake. Furthermore, milling the cake increases the hardness of the annealed powder. After milling the powder cake, the microhardness of the powder is 489HV0.025 with a standard deviation of 18. The effect of annealing on the LMO mix was also investigated. The green density of mixes containing 20%m TS4A7 powder increased from 6.70 to 6.98g/cm3 using the annealed powder instead of the as-atomized powder. The green density of the mix containing 40%m TS4A7 annealed powder was not significantly smaller than that of the mix containing 20%m as-atomized powder (6.67g/cm3). The effect of carbon content of the TS4 powder on the compressibility was also investigated. The powders used for this investigation and their carbon content are as follow: TS4A7 -- 3.66%C, TS4C2.70 -- 2.70%C, TS4C1.51 -- 1.51%C, TS4C0.78 -- 0.78%C. All the powders were annealed and all the LMO mixes produced with these powders contain 40%m of TS4 powder. The results show that the green density increases when the carbon content decreases except for the mix containing the TS4C0.78 because that powder has a large amount of internal porosities. These internal porosities decrease the apparent density of that powder compared to that of the other low carbon TS4 powders (2.81 VS 3.44 and 4.02g/cm3). The green density of the mix with the TS4 A7 annealed powder is 6.67g/cm3 while the green density of the mixes with the TS4C2.70, TS4C1.51 and TS4 C0.78 powders is 6.90, 6.93 and 6.87g/cm3 respectively. The density of the mix containing the TS4C2.70 powder does not change after sintering while the density of the two other mixes decreases after sintering (from 6.93 to 6.86 g/cm3 for LMO40C1.51 and from 6.87 to 6.76g/cm3 for LMO40C0.78). An oxide layer surrounding the TS4C1.51 and TS4C0.78 particles prevented an adequate sintering of the mixes containing these powders. The apparent hardness of the sintered sample containing the TS4C2.70 powder is the largest (67.4HRA) while that of the two others are the smallest. The microhardness of the TS4C2.70 particles in the LMO mix is 962HV 0.025. To conclude, the compressibility of the TS4 powder was increased, but this increase did not have a significant effect on the apparent hardness of the sintered samples produced with the LMO mixes. (Abstract shortened by UMI.).

  20. Conception et validation d'un modele d'analyse et de suivi pour une politique energetique durable et acceptable de l'energie eolienne: Une etude comparative France-Quebec

    NASA Astrophysics Data System (ADS)

    Feurtey, Evariste

    In this research, we built a conceptual model of a sustainable and acceptable wind power policy that we tried to validate through the case study of France and Quebec in the wind energy sector. Our qualitative and comparative approach helps us to illustrate the interaction of institutional variables studied, including the national context of emergence, the balance of power between pressure groups, the supranational and exogenous influences, level of political commitment, policy and regulatory instruments, social acceptance and energy policy mechanisms. The research confirms that the neo-corporatism is present in France as in Quebec. With the unfavorable energy context (low cost of electricity tariff, lack of electricity demand, and an already low zero carbon electric mix), it is an important factor explaining : 1) the 20 years delay accumulated by France and Quebec in the development of wind projects or industrial sector; 2) the 10% limited penetration scale given to wind energy. We also demonstrate that the political commitment to develop wind energy fluctuates with the government majority, the energy context or the influence of pressure groups. This manifests itself in a lack of continuity of policies and tariff instruments used. In both national case studies, the results also show that balanced policies and regulations ensure sustainable development of wind energy only if they allow a sufficient market size. The search results also illustrates that the conceptual division made between acceptance of wind sector, acceptance of ownership, local acceptance is very instructive. Social controversies, though multifactorial, are connected to both a critique of the development model too industrial and private, territorial dilemmas (closed environment), energy context (electric surplus in Quebec), or related to strategic planning system and centralized decision. An important issue for a more acceptable wind policy in the future will come to a greater plurality of ownership, variety of wind projects scale, diversity of financial support mechanisms. This transformation to a more territorial policy that require renewables also calls for decentralization and ecological modernization of institutions. Sustainable and acceptable energy policy requires obtaining a stabilized consensus on the long-term energy mix, which should be done by a comprehensive energy and public debate upstream the development of energy policy. Keywords: energy policy, social acceptance, wind energy, environmental assessment, components, interactions.

  1. Le Rapport langue-culture dans les organisations internationales: Pour Une Sociologie des organisations internationales (The Relationship between Language and Culture in International Organizations: Toward a Sociology of International Organizations).

    ERIC Educational Resources Information Center

    Jastrab de Saint Robert, de Marie-Josee

    1988-01-01

    Understanding the work of international organizations requires an understanding of the relationship between language and culture, a relationship evident in the activities of the international organizations. This relationship is partly responsible for the negative image of such organizations. Research in the sociology of international organizations…

  2. Air pollution and doctors' house calls: results from the ERPURS system for monitoring the effects of air pollution on public health in Greater Paris, France, 1991-1995. Evaluation des Risques de la Pollution Urbaine pour la Santé.

    PubMed

    Medina, S; Le Tertre, A; Quénel, P; Le Moullec, Y; Lameloise, P; Guzzo, J C; Festy, B; Ferry, R; Dab, W

    1997-10-01

    This study examines short-term relationships between doctors' house calls and urban air pollution in Greater Paris for the period 1991-1995. Poisson regressions using nonparametric smoothing functions controlled for time trend, seasonal patterns, pollen counts, influenza epidemics, and weather. The relationship between asthma visits and air pollution was stronger for children. A relative risk (RRP95/P5) of 1.32 [95% confidence interval (CI) = 1.17-1.47)] was observed for an increase from the 5th to the 95th percentile (7-51 micrograms/m3) in daily concentrations of black smoke (BS). The risks for 24-hr sulfur dioxide and nitrogen dioxide levels were in the same range. Cardiovascular conditions, considered globally, showed weaker associations than angina pectoris/myocardial infarction, for which RRP95/P5 was 1.63 (95% CI = 1.10-2.41) in relation to ozone ambient levels. Eye conditions were exclusively related to ozone (RRP95/P5 = 1.17, 95% CI 1.02-1.33). Asthma visits and ozone showed an interaction with minimum temperature: an effect was observed only at 10 degrees C or higher. In two-pollutant models including BS with, successively, SO2, NO2, and O3, only BS and O3 effects remained stable. Along with mortality and hospital admissions, house call activity data, available on a regular basis, may be a sensitive indicator for monitoring health effects related to air pollution. PMID:9356196

  3. For Education and Training Policies Which Foster Competitiveness and Employment: UNICE's Seven Priorities = Pour les Politiques d'Education et de Formation au Service de la Competitivite et de l'Emploi: Les Sept Priorites de l'UNICE.

    ERIC Educational Resources Information Center

    Union of Industrial and Employers' Confederations of Europe, Brussels (Belgium).

    Qualifications and skills are of fundamental economic and social importance. In a context marked by increased globalization of economies and technological development, European companies are faced with far-reaching changes. Because companies need a highly skilled, competent, and adaptable workforce, there is a need to develop strategies for…

  4. Un gars, une fille: plaidoyer pour la culture avec un "petit c" dans un cours de francais languae etrangere (Un gars, une fille: Culture with a "Litte c" in a French as a econd Language Course).

    ERIC Educational Resources Information Center

    Black, Catherine

    2001-01-01

    Looks at the Quebecois TV show, "Un gars, Une fille" used in a university French course to teach the socio-cultural reality that underlies all linguistic utterances in a university-level French course. Attempts to identify what makes the show more authentic than videos and CD ROMs that accompany most language textbooks in French. (Author/VWL)

  5. The International Development Research Centre: A Guide for the Canadian University Research Community = Le Centre de recherches pour le developpement international: guide a l'intention des scientifiques des universites Canadiennes.

    ERIC Educational Resources Information Center

    Tillman, George; Wasilewski, Ania, Ed.

    Written in both English and French this is a manual for the Canadian research community. It describes the International Development Research Centre (IDRC) and its operations. The main objective of the IDRC is to assist scientists in developing countries to identify and conduct research into long term practical solutions to development problems.…

  6. Conséquences de l'interaction entre préférences pour l'habitat et quantité de ressources trophiques sur les communautés d'insectes coprophages (Coleoptera: Scarabaeoidea)

    NASA Astrophysics Data System (ADS)

    Kadiri, Nassera; Lobo, Jorge M.; Lumaret, Jean-Pierre

    Between the years 1988 and 1995, five dung beetle communities were studied in combined conditions of habitat and trophic resources. Investigations were conducted on La Viale experimental farm, in the Causse Méjean, southern France. At each site, dung beetle traps of standard design were set up simultaneously. In most situations, the vegetation cover acted like a filter that allowed the penetration of several ubiquitous but fundamentally open-habitat dung beetle species into forest, at the same time drastically limiting their numbers. Open and close sites differed significantly, open and grazed sites showing the highest richness, abundance and biomass in beetles. Both in open and close sites, a significant increase in trophic resources led to an increase of the diversity and evenness. However in open-habitat, when resources were too abundant, few species were favoured and the diversity and evenness decreased. In forest-habitat, a continuous grazing during several years (increase in resources) modified the dung beetle community, with a high increase in the numbers and biomass of beetles but a smaller increase in richness. Numbers in forest habitat readjusted to the level observed in open habitat with equivalent trophic resources. Similarly to what was observed in open pastures, the forest communities were able to adjust their numbers to the level of available trophic resources. Resources were a more active variable than the structure of habitat on the dung beetle communities. Important resources go against the filter effect which allows the penetration under cover of open-habitat species. Changes were slow (several years), and forest communities remained weak. The poverty of forest habitats is discussed: This scarcity in species is probably due to long time human activities in Europe which drastically reduced forest habitats and developped grazing, favouring generalist and heliophilous open-habitat dung beetle species. Actual grassland communities in Europe are richer than their homologous communities in North America. Conversely, in North America where human activities are recent, the true forest dung beetle communities are still diverse and richer than grassland communities.

  7. Working Well Together: Community Colleges in Literacy Partnerships that Work = S'unir pour reussir: Exemples de partenariats efficaces realises par des colleges communautaires dans le domaine de l'alphabetisation.

    ERIC Educational Resources Information Center

    Curtis, Bert

    This document profiles six successful literacy partnerships between Canadian community colleges and public/private agencies. The following partnerships are examined: an adult basic education program provided through a partnership between New Brunswick Community College and the Correctional Service of Canada; a workplace literacy program offered…

  8. CONFERENCE NOTE: Comité Consultatif pour la Masse et les grandeurs apparentées (CCM), High Pressure and Medium Pressure Working Groups, Second International Seminar on Pressure Metrology from 1 kPa to 1 GPa

    NASA Astrophysics Data System (ADS)

    1992-01-01

    The seminar will be held from 2 to 4 June 1993, preceding the next meeting of the CCM, at the Laboratoire National d'Essais (LNE), 1 rue Gaston Boissier, 75015 Paris, France. Scope of the Seminar The purpose of the seminar is to review the state of the art of pressure measurements in the 1 kPa to 1 GPa range and to present original and innovative contributions from standards laboratories and industry. Main Topics The seminar will be organized in six sessions as follows: Liquid-column manometers Piston gauge pressure standards Properties of liquids and gases relevant to pressure metrology Pressure transducers and transfer standards Pressure standard comparison (methods and results) Dynamic pressure measurements. Each topic will be introduced by a review paper presented by a session chairman. A final session, coordinated by Dr G F Molinar (IMGC), Chairman of the CCM High Pressure Working Group, and Dr P Stuart (NPL), Chairman of the CCM Medium Pressure Working Group, will deal with: Actual limits of accuracy of static pressure measurements in fluid media Fundamental problems in pressure metrology between I kPa and 1 GPa. Call for Papers Papers should be prepared for oral presentation and will be refereed by the session chairmen. The Proceedings will be published as a special issue of Metrologia. Papers should be written according to the instructions for authors printed on the inside back cover of this journal. A one-page abstract should be sent to Dr Molinar at the IMGC, to arrive before 31 January 1993. A participation fee of 900 FFr (175 US) will be charged. This will cover general expenses and a copy of the Proceedings. Hotel reservations, meals and transport are not included. Organizers For further information please contact: 1993 CCM Pressure Seminar, Dr G F Molinar, Istituto di Metrologia "G Colonnetti", Strada delle Cacce 73, 1-10135 Torino, Italy telephone (39) 11 39771; telex 212209 IMGCTO-I; fax (39) 11 346761. Contact at the LNE: J C Legras, telephone (33) 1 40433700; fax (33) 1 40433737. Scientific Committee The following are responsible for the preparation of the seminar programme: J Bonhoure, BIPM, France V Borovkov, VNIIFTRI, Russia C Ehrlich, NIST, USA J Jäger, PTB, Germany J C Legras, LNE, France G F Molinar, IMGC, Italy P Stuart, NPL, UK C Tilford, NIST, USA S Yamamoto, NRLM, Japan R Wisniewski, Warsaw Univ. of Tech., Poland

  9. La résilience d'enseignants œuvrant en milieux défavorisés : la voie prometteuse de la réflexion sur la pratique pour faire face à l'adversité

    NASA Astrophysics Data System (ADS)

    Leroux, Mylène; Théorêt, Manon

    2014-10-01

    The resilience of teachers working in deprived environments: How reflection on personal teaching practice can help to overcome adversity - Teaching in deprived areas presents many challenges. There have been several studies of teachers' resilience in this context, and some have shown that professional skills are an essential protective factor for teachers working in such environments. Some reports also show that reflection on one's personal teaching practice can help to develop these skills. This doctoral study sought to explore the relationship between the resilience of teachers in deprived areas and their reflection on their professional practice. It involved twenty-three teachers from seven very deprived primary schools in Montreal, who were asked to complete a questionnaire on the quality of their working lives and keep a self-evaluation diary of their day-to-day stress levels. They then took part in a semi-directed personal interview. Quantitative and qualitative analysis of the data identified four resilience profiles in the subjects, and described how they reflected on their teaching practice, taking account of the process and content of the reflection. A comparison of the two extreme cases in the sample, the most and least resilient teachers, showed significant divergences in terms of reflection. The discussion highlights the relationship between resilience and reflection, and ways of encouraging the development of such resilience.

  10. Les cours encadres a l'Universite d'Ottawa: Quelles lecons peut-on en tirer pour l'immersion (Sheltered Classes at the University of Ottawa: What Lessons Can One Derive for Immersion)?

    ERIC Educational Resources Information Center

    Dube, Lucille L.

    1991-01-01

    The theoretical foundations and research findings concerning sheltered French and English classes at the University of Ottawa, and an application of this model is examined as a means of ensuring better implementation and coordination of secondary French immersion programs. Quality of instruction and teaching strategies are emphasized. (18…

  11. En Francais, langue seconde: Un cours modulaire pour adultes dans le cadre de l'approche communicative (In French as a Foreign Language: A Modular Course for Adults in the Framework of the Communicative Approach).

    ERIC Educational Resources Information Center

    Bergeron, Jocelyne

    1982-01-01

    The stages of development of an adult communicative course in French are outlined, including the principles used in course content selection, structural progression, and the means found for encouraging student participation. The primary influence for the course came from the Council of Europe and experience with adult students. (Author/MSE)

  12. Formulation d'un modele mathematique par des techniques d'estimation de parametres a partir de donnees de vol pour l'helicoptere Bell 427 et l'avion F/A-18 servant a la recherches en aeroservoelasticite

    NASA Astrophysics Data System (ADS)

    Nadeau-Beaulieu, Michel

    In this thesis, three mathematical models are built from flight test data for different aircraft design applications: a ground dynamics model for the Bell 427 helicopter, a prediction model for the rotor and engine parameters for the same helicopter type and a simulation model for the aeroelastic deflections of the F/A-18. In the ground dynamics application, the model structure is derived from physics where the normal force between the helicopter and the ground is modelled as a vertical spring and the frictional force is modelled with static and dynamic friction coefficients. The ground dynamics model coefficients are optimized to ensure that the model matches the landing data within the FAA (Federal Aviation Administration) tolerance bands for a level D flight simulator. In the rotor and engine application, rotors torques (main and tail), the engine torque and main rotor speed are estimated using a state-space model. The model inputs are nonlinear terms derived from the pilot control inputs and the helicopter states. The model parameters are identified using the subspace method and are further optimised with the Levenberg-Marquardt minimisation algorithm. The model built with the subspace method provides an excellent estimate of the outputs within the FAA tolerance bands. The F/A-18 aeroelastic state-space model is built from flight test. The research concerning this model is divided in two parts. Firstly, the deflection of a given structural surface on the aircraft following a differential ailerons control input is represented by a Multiple Inputs Single Outputs linear model whose inputs are the ailerons positions and the structural surfaces deflections. Secondly, a single state-space model is used to represent the deflection of the aircraft wings and trailing edge flaps following any control input. In this case the model is made non-linear by multiplying model inputs into higher order terms and using these terms as the inputs of the state-space equations. In both cases, the identification method is the subspace method. Most fit coefficients between the estimated and the measured signals are above 73% and most correlation coefficient are higher than 90%.

  13. Utilisation de la teledetection, des SIG et de l'intelligence artificielle pour determiner le niveau de susceptibilite aux mouvements de terrain: Application dans les Andes de la Bolivie

    NASA Astrophysics Data System (ADS)

    Peloquin, Stephane

    1999-11-01

    The socio-economic impact of mass movements for our society is getting more and more serious. The loss of lives and economic losses are now ten times greater than they were at the beginning of the decade. In the hope of reducing these impacts, it is essential to adopt a preventive policy that will encourage mapping of mass movement susceptibility level (MMSL) in critical zones. However, this task is complex and only experts using present techniques can provide satisfactory results. To make possible the production of these maps by a larger number of individuals, we have developed an expert system called EXPERIM that uses remote sensing data and geographic information systems to facilitate the complex tasks without requiring the user to be highly competent in this field of study. This thesis presents the results obtained from a complete strategy developed for a region surrounding Cochabamba, Bolivia. The operational expert system prototype will soon be integrated within the watershed management program directed by the local executing organisation PROMIC. The knowledge acquisition and its expression in concrete terms constitute the principal axis of this research, while the results obtained are the heart of the EXPERIM expert system. These strategic steps aim to establish a knowledge base of data and rules that describe field conditions for each MMSL. We have been able to extract this information by using binary discriminant analysis of a MMSL map produced by an expert for a pilot zone called Cuenca Taquina, which is geoecologically representative of the 38 neighbouring watersheds. Using this technique, we were able to establish a sensitivity model that recreates the expert's map with a success rate of 89% and 78% when two or three MMS levels are used. Based on a detailed analysis of the susceptibility model it was evident that stability conditions are the result of the topographic, geologic and geomorphologic environments. The level of susceptibility was found to be independent of the vegetation condition. In order to apply the model to the surrounding watersheds, we integrated remotely sensed data within the spatial database to map the presence/absence of five essential geoecological units required by the susceptibility model. This was done using a hierarchical classification method. Three sensors were evaluated: Landsat, SPOT and RADARSAT. In the elaboration of this specific step, we evaluated the most efficient spectral band combinations within each image and between images for each of the five geoecological units. For each of the land cover types, the analysis shows that LANDSAT constitutes the most powerful sensor to map these units and that image fusion does not provide significantly better results when compared to the extra amount of work that this requires. Using remote sensing data instead of field data or airphotograph interpretation in watersheds where only topographic data are available decreases the level of accuracy by less than 10%.

  14. Un profilomètre laser pour la perception de l'espace par les non-voyantsA laser profilometer as a space perception system for blind people

    NASA Astrophysics Data System (ADS)

    Farcy, René; Damaschini, Roland; Milchberg, Noemi; Sampaio, Eliana; Brenière, Yvon; Maton, Bernard

    1997-10-01

    We have exploited laser telemetry to extend the reach of the hand or of the cane while retaining a natural posture. A laser telemeter of similar dimensions as a TV remote control device is held in the hand. It is a class II device for ocular safety. The blind person perceives the direction in which the laser beam is pointing thanks to his internal conciousness of the position and of the movements of his members (proprioception). The distance to the first obstacle encountered by the laser beam is measured at a rate of about 25 measurements per second. The range of the telemeter (10 cm to 20 m) is divided into suitable intervals of distance. To each interval there corresponds a musical note sent to an earpiece. By an adequate bending of the wrist, one obtains sections of the surrounding space. The sequence of distances is immediately converted into a musical line at the rate of the scan. The natural proprioceptive perception of the movements, combined with the musical line furnishes the subject with a cerebral image of the profiles of the obstacles. Thefundamental information is constituted above all by the variation of the musical notes, so we prefer to call the set-up a profilometer. The extraction of profiles in various directions allows one to acquire three-dimensional spatial information out to 20 m. About 50 blind volunteers have experimented with the system for simple exercises, including the detection of a post and of a hole in the floor and orientation by a wall to find one's way. It turned out that the proprioception and the spatial perception of subjects often had to be improved by re-education. We are taking these factors into account for optimization of the learning techniques.

  15. The Immersion Phenomenon: English-Speaking Canadians Come to Grips with the Country's Language Duality = l'enseignement immersif: le Canada anglais se dote d'un instrument efficace pour soutenir la gageure du biblinguisme.

    ERIC Educational Resources Information Center

    Stern, H. H., Ed.

    1984-01-01

    A special journal issue on French language immersion programs in Canada consists of these articles: "The Immersion Phenomenon" (H. H. Stern); "For My Kids, It's French without Tears" (Judy Gibson); "A 'First' for a Toronto High School" (Claire Mian); "The Teachers, Key to the Success Story" (Andre Obadia); "A Promising Experiment at Ottawa…

  16. Première caractérisation palynologique du Trias moyen dans le Haut Atlas ; implications pour l'initiation du rifting téthysien au Maroc

    NASA Astrophysics Data System (ADS)

    El Arabi, El Hassane; Diez, José Bienvenido; Broutin, Jean; Essamoud, Rachid

    2006-07-01

    The Middle Anisian has been palynologically characterized for the first time, at the whole Moroccan scale, in the High Atlas of Marrakech. The stratigraphic, tectonic and paleogeographic implications of this discovery are analysed. To cite this article: E.H. El Arabi et al., C. R. Geoscience 338 (2006).

  17. Comparison of prediction methods for the uptake of As, Cd and Pb in carrot and lettuce.

    PubMed

    Legind, C N; Trapp, S

    2010-07-01

    The New Model Framework (NMF) for uptake into crops is based on particle deposition and Transfer factors from soil to plant calculated from the BAse de donnees sur les teneurs en Elements Traces metalliques de Plantes Potageres (BAPPET) database. Besides NMF, approaches developed by the National Institute of Public Health and the Environment (RIVM), Hough, and the United States Environmental Protection Agency (US EPA), and the Contaminated Land Exposure Assessment (CLEA) approach were tested. Experimental data were assembled from the BAPPET database and Danish background data of As, Cd and Pb in soil, air and crops was collected. None of the models proved able to estimate the measured concentrations in plants from the BAPPET database with an absolute normalized error smaller than 70%. On average, the predictions had an error of 80-250%. However, when applying the models to the rural Danish background scenario, the NMF and other models predicted the concentrations in carrot and lettuce within the range of measured values. Regressions considering soil pH, organic matter and clay content were not superior to simple transfer factors. The transfer from air to plant is significant, at least under background conditions, and should be considered in the prediction methods. PMID:20818585

  18. Another First at NSLS-II Construction Site

    ScienceCinema

    None

    2010-01-08

    Workers at the NSLS-II ring building construction site recently completed the first complicated concrete pour for the approximately 19-ft.-tall walls of the Utility Tunnel. The continuous pour was the first of its kind, as previous pours have been for foo

  19. 40 CFR 464.34 - New source performance standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for... x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for... normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant....

  20. 40 CFR 464.34 - New source performance standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for... x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for... normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant....