Science.gov

Sample records for model program description

  1. A simulation model for wind energy storage systems. Volume 3: Program descriptions

    NASA Technical Reports Server (NTRS)

    Warren, A. W.; Edsinger, R. W.; Burroughs, J. D.

    1977-01-01

    Program descriptions, flow charts, and program listings for the SIMWEST model generation program, the simulation program, the file maintenance program, and the printer plotter program are given. For Vol 2, see .

  2. Puerto Rico water resources planning model program description

    USGS Publications Warehouse

    Moody, D.W.; Maddock, Thomas; Karlinger, M.R.; Lloyd, J.J.

    1973-01-01

    Because the use of the Mathematical Programming System -Extended (MPSX) to solve large linear and mixed integer programs requires the preparation of many input data cards, a matrix generator program to produce the MPSX input data from a much more limited set of data may expedite the use of the mixed integer programming optimization technique. The Model Definition and Control Program (MODCQP) is intended to assist a planner in preparing MPSX input data for the Puerto Rico Water Resources Planning Model. The model utilizes a mixed-integer mathematical program to identify a minimum present cost set of water resources projects (diversions, reservoirs, ground-water fields, desalinization plants, water treatment plants, and inter-basin transfers of water) which will meet a set of future water demands and to determine their sequence of construction. While MODCOP was specifically written to generate MPSX input data for the planning model described in this report, the program can be easily modified to reflect changes in the model's mathematical structure.

  3. HIGHWAY, a transportation routing model: program description and users' manual

    SciTech Connect

    Joy, D.S.; Johnson, P.E.; Gibson, S.M.

    1982-12-01

    A computerized transportation routing model has been developed at the Oak Ridge National Laboratory to be used for predicting likely routes for shipping radioactive materials. The HIGHWAY data base is a computerized road atlas containing descriptions of the entire interstate highway system, the federal highway system, and most of the principal state roads. In addition to its prediction of the most likely commercial route, options incorporated in the HIGHWAY model can allow for maximum use of interstate highways or routes that will bypass urbanized areas containing populations > 100,000. The user may also interactively modify the data base to predict routes that bypass any particular state, city, town, or specific highway segment.

  4. HIGHWAY 3. 1: An enhanced HIGHWAY routing model: Program description, methodology, and revised user's manual

    SciTech Connect

    Johnson, P.E.; Joy, D.S. ); Clarke, D.B.; Jacobi, J.M. . Transportation Center)

    1993-03-01

    The HIGHWAY program provides a flexible tool for predicting highway routes for transporting radioactive materials in the United States. The HIGHWAY data base is essentially a computerized road atlas that currently describes over 240,000 miles of highways. Complete descriptions of all Interstate System and most US highways (except those that parallel a nearby Interstate highway) are included in the data base. Many of the principal state highways and a number of local and county highways are also identified. The data base also includes locations of nuclear facilities and major airports. Several different types of routes may be calculated, depending on a set of user-supplied constraints. Routes are calculated by minimizing the total impedance between the origin and the destination. Basically, the impedance is defined as a function of distance and driving time along a particular highway segment. Several routing constraints can be imposed during the calculations. One of the special features of the HIGHWAY model is its ability to calculate routes that maximize use of Interstate System highways. This feature allows the user to predict routes for shipments of radioactive materials that conform to the US Department of Transportation routing regulations. Other features of the model include the ability to predict routes that bypass a specific state, city, town, or highway segment. Two special features have been incorporated in HIGHWAY, version 3.1. The first is the ability to automatically calculate alternative routes. Frequently, there are a number of routes between the source and destination that vary slightly in distance and estimated driving time. The HIGHWAY program offers a selection of different but nearly equal routes. The second special feature is the capability to calculate route-specific population density statistics. The population density distribution is calculated for each highway segment in the route and is reported on a state-by-state basis.

  5. RIMS Program Description.

    ERIC Educational Resources Information Center

    Kraepelien, Hans

    Computer routines for the translation of teacher-prepared mark sense forms to magnetic tape are described. The program, Receiving IMS (RIMS), is part of the Southwest Regional Laboratory's (SWRL) Instructional Management System (IMS). It accepts mark sense sheets from remotely located Xerox 660 scanner copiers and/or IMS update information from…

  6. Radioluminescent lighting program description

    SciTech Connect

    1987-11-01

    For more than 30 years the Department of Energy (DOE) and its predecessor agencies have conducted research and development aimed at beneficial uses of products derived from its nuclear activities. An important and promising element of radiation technology is the Program for Radioluminescent (RL) development. For years simple RL devices, such as aircraft exit signs, have served necessary functions in society. Electrons exciting phosphors and producing light is a fundamental concept to which the layman can immediately relate, while gaining a balanced perspective concerning risk and safety. DOE`s RL lighting development program has advanced the technology with infrared RL markers for helipads which are not detectable without the aid of special viewers. These devices were used to aid in the evacuation of wounded from Grenada. Visible RL airfield lighting has been used to promote aviation safety in remote Eskimo communities in Alaska, and non-electric taxiway signs and markers in the corrosive saline soils of Florida airports. The current plan is to consolidate past accomplishments and develop RL devices and systems using advanced technology for new applications. The potential for improved performance that solid-matrix RL techniques offer has stimulated interest in a variety of innovative applications for which electric lighting has long been the only practical alternative. The program described in this document is intended to provide for an optimum development and application of RL technology while supporting the transfer of this technology to the private sector and providing an institutional perspective from which the longer range applications and ramifications of this technology can be anticipated.

  7. GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.

    SciTech Connect

    PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

    2002-05-31

    THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

  8. CRAC2 model description

    SciTech Connect

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions.

  9. The benchmark aeroelastic models program: Description and highlights of initial results

    NASA Technical Reports Server (NTRS)

    Bennett, Robert M.; Eckstrom, Clinton V.; Rivera, Jose A., Jr.; Dansberry, Bryan E.; Farmer, Moses G.; Durham, Michael H.

    1991-01-01

    An experimental effort was implemented in aeroelasticity called the Benchmark Models Program. The primary purpose of this program is to provide the necessary data to evaluate computational fluid dynamic codes for aeroelastic analysis. It also focuses on increasing the understanding of the physics of unsteady flows and providing data for empirical design. An overview is given of this program and some results obtained in the initial tests are highlighted. The tests that were completed include measurement of unsteady pressures during flutter of rigid wing with a NACA 0012 airfoil section and dynamic response measurements of a flexible rectangular wing with a thick circular arc airfoil undergoing shock boundary layer oscillations.

  10. Enhanced TCAS 2/CDTI traffic Sensor digital simulation model and program description

    NASA Technical Reports Server (NTRS)

    Goka, T.

    1984-01-01

    Digital simulation models of enhanced TCAS 2/CDTI traffic sensors are developed, based on actual or projected operational and performance characteristics. Two enhanced Traffic (or Threat) Alert and Collision Avoidance Systems are considered. A digital simulation program is developed in FORTRAN. The program contains an executive with a semireal time batch processing capability. The simulation program can be interfaced with other modules with a minimum requirement. Both the traffic sensor and CAS logic modules are validated by means of extensive simulation runs. Selected validation cases are discussed in detail, and capabilities and limitations of the actual and simulated systems are noted. The TCAS systems are not specifically intended for Cockpit Display of Traffic Information (CDTI) applications. These systems are sufficiently general to allow implementation of CDTI functions within the real systems' constraints.

  11. INTERLINE 5. 0 -- An expanded railroad routing model: Program description, methodology, and revised user's manual

    SciTech Connect

    Johnson, P.E.; Joy, D.S. ); Clarke, D.B.; Jacobi, J.M. . Transportation Center)

    1993-03-01

    A rail routine model, INTERLINE, has been developed at the Oak Ridge National Laboratory to investigate potential routes for transporting radioactive materials. In Version 5.0, the INTERLINE routing algorithms have been enhanced to include the ability to predict alternative routes, barge routes, and population statistics for any route. The INTERLINE railroad network is essentially a computerized rail atlas describing the US railroad system. All rail lines, with the exception of industrial spurs, are included in the network. Inland waterways and deep water routes along with their interchange points with the US railroadsystem are also included. The network contains over 15,000 rail and barge segments (links) and over 13,000 stations, interchange points, ports, and other locations (nodes). The INTERLINE model has been converted to operate on an IBM-compatible personal computer. At least a 286 computer with a hard disk containing approximately 6 MB of free space is recommended. Enhanced program performance will be obtained by using arandom-access memory drive on a 386 or 486 computer.

  12. 14 CFR 437.23 - Program description.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Program description. 437.23 Section 437.23 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING EXPERIMENTAL PERMITS Requirements to Obtain an Experimental Permit Program Description § 437.23 Program description. (a)...

  13. 40 CFR 123.22 - Program description.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Program description. 123.22 Section 123.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS State Program Submissions § 123.22 Program description. Any State that seeks...

  14. Descriptive Model of Generic WAMS

    SciTech Connect

    Hauer, John F.; DeSteese, John G.

    2007-06-01

    The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

  15. Baylor SBIRT Medical Residency Training Program: Model Description and Initial Evaluation

    ERIC Educational Resources Information Center

    Bray, James H.; Kowalchuk, Alicia; Waters, Vicki; Laufman, Larry; Shilling, Elizabeth H.

    2012-01-01

    The Baylor College of Medicine SBIRT Medical Residency Training Program is a multilevel project that trains residents and faculty in evidenced-based screening, brief intervention, and referral to treatment (SBIRT) methods for alcohol and substance use problems. This paper describes the training program and provides initial evaluation after the…

  16. Model Experiments and Model Descriptions

    NASA Technical Reports Server (NTRS)

    Jackman, Charles H.; Ko, Malcolm K. W.; Weisenstein, Debra; Scott, Courtney J.; Shia, Run-Lie; Rodriguez, Jose; Sze, N. D.; Vohralik, Peter; Randeniya, Lakshman; Plumb, Ian

    1999-01-01

    The Second Workshop on Stratospheric Models and Measurements Workshop (M&M II) is the continuation of the effort previously started in the first Workshop (M&M I, Prather and Remsberg [1993]) held in 1992. As originally stated, the aim of M&M is to provide a foundation for establishing the credibility of stratospheric models used in environmental assessments of the ozone response to chlorofluorocarbons, aircraft emissions, and other climate-chemistry interactions. To accomplish this, a set of measurements of the present day atmosphere was selected. The intent was that successful simulations of the set of measurements should become the prerequisite for the acceptance of these models as having a reliable prediction for future ozone behavior. This section is divided into two: model experiment and model descriptions. In the model experiment, participant were given the charge to design a number of experiments that would use observations to test whether models are using the correct mechanisms to simulate the distributions of ozone and other trace gases in the atmosphere. The purpose is closely tied to the needs to reduce the uncertainties in the model predicted responses of stratospheric ozone to perturbations. The specifications for the experiments were sent out to the modeling community in June 1997. Twenty eight modeling groups responded to the requests for input. The first part of this section discusses the different modeling group, along with the experiments performed. Part two of this section, gives brief descriptions of each model as provided by the individual modeling groups.

  17. Computer model for refinery operations with emphasis on jet fuel production. Volume 1: Program description

    NASA Technical Reports Server (NTRS)

    Dunbar, D. N.; Tunnah, B. G.

    1978-01-01

    A FORTRAN computer program is described for predicting the flow streams and material, energy, and economic balances of a typical petroleum refinery, with particular emphasis on production of aviation turbine fuel of varying end point and hydrogen content specifications. The program has provision for shale oil and coal oil in addition to petroleum crudes. A case study feature permits dependent cases to be run for parametric or optimization studies by input of only the variables which are changed from the base case.

  18. 34 CFR 675.44 - Program description.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false Program description. 675.44 Section 675.44 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL WORK-STUDY PROGRAMS Work-Colleges Program § 675.44 Program description. (a) An institution that satisfies...

  19. 34 CFR 675.44 - Program description.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 3 2011-07-01 2011-07-01 false Program description. 675.44 Section 675.44 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL WORK-STUDY PROGRAMS Work-Colleges Program § 675.44 Program description. (a) An institution that satisfies...

  20. 34 CFR 675.44 - Program description.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 3 2014-07-01 2014-07-01 false Program description. 675.44 Section 675.44 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL WORK-STUDY PROGRAMS Work-Colleges Program § 675.44 Program description....

  1. 34 CFR 675.44 - Program description.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 3 2013-07-01 2013-07-01 false Program description. 675.44 Section 675.44 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL WORK-STUDY PROGRAMS Work-Colleges Program § 675.44 Program description....

  2. 34 CFR 675.44 - Program description.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 3 2012-07-01 2012-07-01 false Program description. 675.44 Section 675.44 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL WORK-STUDY PROGRAMS Work-Colleges Program § 675.44 Program description....

  3. Keys to Success in Student Personnel Services. A Description of a Model Program.

    ERIC Educational Resources Information Center

    New Albany - Floyd County Consolidated School Corp., IN.

    A demonstration student personnel services project was developed and implemented at the Prosser Vocational Center in Indiana. In the 1977-1978 school year, students from eighteen cooperating high schools participated in the program. This represented an increase, due to recruiting by both staff and students, career education beginning at the…

  4. ECOLOGICAL STUDIES AND MATHEMATICAL MODELING OF 'CLADOPHORA' IN LAKE HURON: 1. PROGRAM DESCRIPTION AND FIELD MONITORING OF GROWTH DYNAMICS (JOURNAL VERSION)

    EPA Science Inventory

    A 3-year program was conducted to examine the ecology of Cladophora glomerata and to develop a mathematical model useful in evaluating various management strategies for the control of this nuisance alga. This manuscript provides a detailed description of the field program and stu...

  5. Description of the Mountain Cloud Chemistry Program version of the PLUVIUS MOD 5. 0 reactive storm simulation model

    SciTech Connect

    Luecken, D.J.; Whiteman, C.D.; Chapman, E.G.; Andrews, G.L.; Bader, D.C.

    1987-07-01

    Damage to forest ecosystems on mountains in the eastern United States has prompted a study conducted for the US Environmental Protection Agency's Mountain Cloud Chemistry Program (MCCP). This study has led to the development of a numerical model called MCCP PLUVIUS, which has been used to investigate the chemical transformations and cloud droplet deposition in shallow, nonprecipitating orographic clouds. The MCCP PLUVIUS model was developed as a specialized version of the existing PLUVIUS MOD 5.0 reactive storm model. It is capable of simulating aerosol scavenging, nonreactive gas scavenging, aqueous phase SO/sub 2/ reactions, and cloud water deposition. A description of the new model is provided along with information on model inputs and outputs, as well as suggestions for its further development. The MCCP PLUVIUS incorporates a new method to determine the depth of the layer of air which flows over a mountaintop to produce an orographic cloud event. It provides a new method for calculating hydrogen ion concentrations, and provides updated expressions and values for solubility, dissociation and reaction rate constants.

  6. 14 CFR 437.23 - Program description.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... TRANSPORTATION LICENSING EXPERIMENTAL PERMITS Requirements to Obtain an Experimental Permit Program Description... structural, flight control, thermal, pneumatic, hydraulic, propulsion, electrical, environmental...

  7. 14 CFR 437.23 - Program description.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... TRANSPORTATION LICENSING EXPERIMENTAL PERMITS Requirements to Obtain an Experimental Permit Program Description... structural, flight control, thermal, pneumatic, hydraulic, propulsion, electrical, environmental...

  8. 14 CFR 437.23 - Program description.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... TRANSPORTATION LICENSING EXPERIMENTAL PERMITS Requirements to Obtain an Experimental Permit Program Description... structural, flight control, thermal, pneumatic, hydraulic, propulsion, electrical, environmental...

  9. 14 CFR 437.23 - Program description.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... TRANSPORTATION LICENSING EXPERIMENTAL PERMITS Requirements to Obtain an Experimental Permit Program Description... structural, flight control, thermal, pneumatic, hydraulic, propulsion, electrical, environmental...

  10. HIGHWAY 3.1: An enhanced HIGHWAY routing model: Program description, methodology, and revised user`s manual

    SciTech Connect

    Johnson, P.E.; Joy, D.S.; Clarke, D.B.; Jacobi, J.M.

    1993-03-01

    The HIGHWAY program provides a flexible tool for predicting highway routes for transporting radioactive materials in the United States. The HIGHWAY data base is essentially a computerized road atlas that currently describes over 240,000 miles of highways. Complete descriptions of all Interstate System and most US highways (except those that parallel a nearby Interstate highway) are included in the data base. Many of the principal state highways and a number of local and county highways are also identified. The data base also includes locations of nuclear facilities and major airports. Several different types of routes may be calculated, depending on a set of user-supplied constraints. Routes are calculated by minimizing the total impedance between the origin and the destination. Basically, the impedance is defined as a function of distance and driving time along a particular highway segment. Several routing constraints can be imposed during the calculations. One of the special features of the HIGHWAY model is its ability to calculate routes that maximize use of Interstate System highways. This feature allows the user to predict routes for shipments of radioactive materials that conform to the US Department of Transportation routing regulations. Other features of the model include the ability to predict routes that bypass a specific state, city, town, or highway segment. Two special features have been incorporated in HIGHWAY, version 3.1. The first is the ability to automatically calculate alternative routes. Frequently, there are a number of routes between the source and destination that vary slightly in distance and estimated driving time. The HIGHWAY program offers a selection of different but nearly equal routes. The second special feature is the capability to calculate route-specific population density statistics. The population density distribution is calculated for each highway segment in the route and is reported on a state-by-state basis.

  11. 40 CFR 145.23 - Program description.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... responsibility requirements of §§ 144.51 and 144.52, and 40 CFR part 146; (7) A description of and schedule for... this part and 40 CFR part 144. For Class VI programs, a schedule for issuing permits within two years... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Program description. 145.23...

  12. 42 CFR 430.0 - Program description.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 4 2011-10-01 2011-10-01 false Program description. 430.0 Section 430.0 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Provisions § 430.0 Program description. Title XIX of the Social Security Act, enacted in 1965,...

  13. 42 CFR 430.0 - Program description.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 4 2014-10-01 2014-10-01 false Program description. 430.0 Section 430.0 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Provisions § 430.0 Program description. Title XIX of the Social Security Act, enacted in 1965,...

  14. 42 CFR 430.0 - Program description.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Program description. 430.0 Section 430.0 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Provisions § 430.0 Program description. Title XIX of the Social Security Act, enacted in 1965,...

  15. 42 CFR 457.1 - Program description.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Program description. 457.1 Section 457.1 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Introduction; State Plans for Child Health Insurance Programs...

  16. 42 CFR 457.1 - Program description.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 4 2014-10-01 2014-10-01 false Program description. 457.1 Section 457.1 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Introduction; State Plans for Child Health Insurance Programs...

  17. 42 CFR 457.1 - Program description.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 4 2011-10-01 2011-10-01 false Program description. 457.1 Section 457.1 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Introduction; State Plans for Child Health Insurance Programs...

  18. 42 CFR 457.1 - Program description.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 4 2012-10-01 2012-10-01 false Program description. 457.1 Section 457.1 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Introduction; State Plans for Child Health Insurance Programs...

  19. 42 CFR 457.1 - Program description.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 4 2013-10-01 2013-10-01 false Program description. 457.1 Section 457.1 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Introduction; State Plans for Child Health Insurance Programs...

  20. Descriptions of Paraprofessional Programs in Education.

    ERIC Educational Resources Information Center

    New York Univ., NY. New Careers Development Center.

    This collection of project descriptions of paraprofessional programs in education, originally compiled for use at the 1969 national conference, is designed to provide up-to-date information on various aspects of operating paraprofessional programs. The agencies conducting these seven programs, each of which is reported here by its project…

  1. AREST model description

    SciTech Connect

    Engel, D.W.; McGrail, B.P.

    1993-11-01

    The Office of Civilian Radioactive Waste Management and the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) have supported the development of the Analytical Repository Source-Term (AREST) at Pacific Northwest Laboratory. AREST is a computer model developed to evaluate radionuclide release from an underground geologic repository. The AREST code can be used to calculate/estimate the amount and rate of each radionuclide that is released from the engineered barrier system (EBS) of the repository. The EBS is the man-made or disrupted area of the repository. AREST was designed as a system-level models to simulate the behavior of the total repository by combining process-level models for the release from an individual waste package or container. AREST contains primarily analytical models for calculating the release/transport of radionuclides to the lost rock that surrounds each waste package. Analytical models were used because of the small computational overhead that allows all the input parameters to be derived from a statistical distribution. Recently, a one-dimensional numerical model was also incorporated into AREST, to allow for more detailed modeling of the transport process with arbitrary length decay chains. The next step in modeling the EBS, is to develop a model that couples the probabilistic capabilities of AREST with a more detailed process model. This model will need to look at the reactive coupling of the processes that are involved with the release process. Such coupling would include: (1) the dissolution of the waste form, (2) the geochemical modeling of the groundwater, (3) the corrosion of the container overpacking, and (4) the backfill material, just to name a few. Several of these coupled processes are already incorporated in the current version of AREST.

  2. Thermal energy storage program description

    SciTech Connect

    Reimers, E.

    1989-03-01

    The U.S. Department of Energy (DOE) has sponsored applied research, development, and demonstration of technologies aimed at reducing energy consumption and encouraging replacement of premium fuels (notably oil) with renewable or abundant indigenous fuels. One of the technologies identified as being able to contribute to these goals is thermal energy storage (TES). Based on the potential for TES to contribute to the historic mission of the DOE and to address emerging energy issues related to the environment, a program to develop specific TES technologies for diurnal, industrial, and seasonal applications is underway. Currently, the program is directed toward three major application targets: (1) TES development for efficient off-peak building heating and cooling, (2) development of advanced TES building materials, and (3) TES development to reduce industrial energy consumption.

  3. 15 CFR 291.1 - Program description.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Program description. 291.1 Section 291.1 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION PARTNERSHIP; ENVIRONMENTAL PROJECTS §...

  4. User's guide for the Urban Airshed Model. Volume 5. Description and operation of the ROM - UAM interface program system

    SciTech Connect

    Tang, R.T.; Gerry, S.C.; Newsome, J.S.; Van Meter, A.R.; Wayland, R.A.

    1990-06-01

    The user's guide for the Urban Airshed Model (UAM) is divided into five volumes. Volume V describes the ROM-UAM interface program system, a software package that can be used to generate UAM input files from inputs and outputs provided by the EPA Regional Oxidant Model (ROM).

  5. Description of a computer program and numerical techniques for developing linear perturbation models from nonlinear systems simulations

    NASA Technical Reports Server (NTRS)

    Dieudonne, J. E.

    1978-01-01

    A numerical technique was developed which generates linear perturbation models from nonlinear aircraft vehicle simulations. The technique is very general and can be applied to simulations of any system that is described by nonlinear differential equations. The computer program used to generate these models is discussed, with emphasis placed on generation of the Jacobian matrices, calculation of the coefficients needed for solving the perturbation model, and generation of the solution of the linear differential equations. An example application of the technique to a nonlinear model of the NASA terminal configured vehicle is included.

  6. Description of Exemplar Cases in the Intensive Mental Health Program: Illustrations of Application of the Therapeutic Model

    ERIC Educational Resources Information Center

    Nelson, Timothy D.; Mashunkashey, Joanna O.; Mitchell, Montserrat C.; Benson, Eric R.; Vernberg, Eric M.; Roberts, Michael C.

    2008-01-01

    We describe cases from the clinical records in the Intensive Mental Health Program to illustrate the diverse presenting problems, intervention strategies, therapeutic process, and outcomes for children receiving services in this school-based, community-oriented treatment model. Cases reflect varying degrees of treatment response and potential…

  7. Sigma 2 Graphic Display Software Program Description

    NASA Technical Reports Server (NTRS)

    Johnson, B. T.

    1973-01-01

    A general purpose, user oriented graphic support package was implemented. A comprehensive description of the two software components comprising this package is given: Display Librarian and Display Controller. These programs have been implemented in FORTRAN on the XDS Sigma 2 Computer Facility. This facility consists of an XDS Sigma 2 general purpose computer coupled to a Computek Display Terminal.

  8. 40 CFR 145.23 - Program description.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... this part and 40 CFR part 144. For Class VI programs, a schedule for issuing permits within two years... responsibility requirements of §§ 144.51 and 144.52, and 40 CFR part 146; (7) A description of and schedule for... procedures for coordination set forth, and an agency may be designated as a “lead agency” to...

  9. 40 CFR 145.23 - Program description.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... this part and 40 CFR part 144. For Class VI programs, a schedule for issuing permits within two years... responsibility requirements of §§ 144.51 and 144.52, and 40 CFR part 146; (7) A description of and schedule for... procedures for coordination set forth, and an agency may be designated as a “lead agency” to...

  10. 40 CFR 145.23 - Program description.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... this part and 40 CFR part 144. For Class VI programs, a schedule for issuing permits within two years... responsibility requirements of §§ 144.51 and 144.52, and 40 CFR part 146; (7) A description of and schedule for... procedures for coordination set forth, and an agency may be designated as a “lead agency” to...

  11. INTERLINE 5.0 -- An expanded railroad routing model: Program description, methodology, and revised user`s manual

    SciTech Connect

    Johnson, P.E.; Joy, D.S.; Clarke, D.B.; Jacobi, J.M.

    1993-03-01

    A rail routine model, INTERLINE, has been developed at the Oak Ridge National Laboratory to investigate potential routes for transporting radioactive materials. In Version 5.0, the INTERLINE routing algorithms have been enhanced to include the ability to predict alternative routes, barge routes, and population statistics for any route. The INTERLINE railroad network is essentially a computerized rail atlas describing the US railroad system. All rail lines, with the exception of industrial spurs, are included in the network. Inland waterways and deep water routes along with their interchange points with the US railroadsystem are also included. The network contains over 15,000 rail and barge segments (links) and over 13,000 stations, interchange points, ports, and other locations (nodes). The INTERLINE model has been converted to operate on an IBM-compatible personal computer. At least a 286 computer with a hard disk containing approximately 6 MB of free space is recommended. Enhanced program performance will be obtained by using arandom-access memory drive on a 386 or 486 computer.

  12. AOIPS 3 user's guide. Volume 2: Program descriptions

    NASA Technical Reports Server (NTRS)

    Schotz, Steve S.; Piper, Thomas S.; Negri, Andrew J.

    1990-01-01

    The Atmospheric and Oceanographic Information Processing System (AOIPS) 3 is the version of the AOIPS software as of April 1989. The AOIPS software was developed jointly by the Goddard Space Flight Center and General Sciences Corporation. A detailed description of very AOIPS program is presented. It is intended to serve as a reference for such items as program functionality, program operational instructions, and input/output variable descriptions. Program descriptions are derived from the on-line help information. Each program description is divided into two sections. The functional description section describes the purpose of the program and contains any pertinent operational information. The program description sections lists the program variables as they appear on-line, and describes them in detail.

  13. Programming models

    SciTech Connect

    Daniel, David J; Mc Pherson, Allen; Thorp, John R; Barrett, Richard; Clay, Robert; De Supinski, Bronis; Dube, Evi; Heroux, Mike; Janssen, Curtis; Langer, Steve; Laros, Jim

    2011-01-14

    A programming model is a set of software technologies that support the expression of algorithms and provide applications with an abstract representation of the capabilities of the underlying hardware architecture. The primary goals are productivity, portability and performance.

  14. IDA/BPT crisis relocation planning model: description, documentation and user's guide to the computer program. Final report

    SciTech Connect

    Pearsall, E.S.; Bushnell, R.C.

    1982-12-22

    This report describes work performed by Bushnell, Pearsall and Trozzo, Inc., under subcontract with the Institute for Defense Analyses on Task A-1 of IDA Contract No. EMW-0749 with the Federal Emergency Management Agency. Task A-1 calls for the development of a model to simulate population movement during an evacuation from the risk area to the various host areas over a transportation network. This report describes, documents and provides a user's guide to a system of computer routines which perform the various computations required to apply a crisis relocation model developed jointly by IDA and BPT, Inc. The computer routines together comprise an interactive system resident on the FEMA Univac 1108 facility. The model and its attached national data base can be used to analyze in detail the evacuation.

  15. 8 CFR 236.10 - Description of program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... DETENTION OF INADMISSIBLE AND DEPORTABLE ALIENS; REMOVAL OF ALIENS ORDERED REMOVED Family Unity Program § 236.10 Description of program. The family unity program implements the provisions of section 301...

  16. 8 CFR 236.10 - Description of program.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... DETENTION OF INADMISSIBLE AND DEPORTABLE ALIENS; REMOVAL OF ALIENS ORDERED REMOVED Family Unity Program § 236.10 Description of program. The family unity program implements the provisions of section 301...

  17. 8 CFR 236.10 - Description of program.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... DETENTION OF INADMISSIBLE AND DEPORTABLE ALIENS; REMOVAL OF ALIENS ORDERED REMOVED Family Unity Program § 236.10 Description of program. The family unity program implements the provisions of section 301...

  18. 8 CFR 236.10 - Description of program.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... DETENTION OF INADMISSIBLE AND DEPORTABLE ALIENS; REMOVAL OF ALIENS ORDERED REMOVED Family Unity Program § 236.10 Description of program. The family unity program implements the provisions of section 301...

  19. 8 CFR 236.10 - Description of program.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... DETENTION OF INADMISSIBLE AND DEPORTABLE ALIENS; REMOVAL OF ALIENS ORDERED REMOVED Family Unity Program § 236.10 Description of program. The family unity program implements the provisions of section 301...

  20. 15 CFR 16.2 - Description and goal of program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Description and goal of program. 16.2 Section 16.2 Commerce and Foreign Trade Office of the Secretary of Commerce PROCEDURES FOR A VOLUNTARY CONSUMER PRODUCT INFORMATION LABELING PROGRAM § 16.2 Description and goal of program. (a) The Department's Voluntary Consumer Product...

  1. Spatial Mental Models from Descriptions.

    ERIC Educational Resources Information Center

    Tversky, Barbara; And Others

    1994-01-01

    Reviews two projects studying the nature of mental representations of space induced entirely by language. The first project investigates perspective in descriptions of large-scale (e.g., convention center, town) space. The second project investigates mental representations of objects located immediately around the body. (37 references) (KRN)

  2. The Marshall Engineering Thermosphere (MET) Model. Volume 1; Technical Description

    NASA Technical Reports Server (NTRS)

    Smith, R. E.

    1998-01-01

    Volume 1 presents a technical description of the Marshall Engineering Thermosphere (MET) model atmosphere and a summary of its historical development. Various programs developed to augment the original capability of the model are discussed in detail. The report also describes each of the individual subroutines developed to enhance the model. Computer codes for these subroutines are contained in four appendices.

  3. Space Station Program Description Document. Books 1-7

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The Space Station Program Description Document is summarized. The six volumes include: (1) introduction and summary; (2) mission description; (3) systems requirements and characteristics; (4) advanced development; (6) system operations; and (7) program plan. Volume 5 was deleted as a separate book.

  4. A Description of Postcertificate Dental Hygiene Programs.

    ERIC Educational Resources Information Center

    Rubinstein, Linda; Brand, Marcia K.

    1986-01-01

    Results of a survey of baccalaureate programs for dental hygienists concerning their program structure, objectives, and graduate employment patterns are reported and their implications for program development and research efforts are discussed. (MSE)

  5. Descriptive Geometry and Geometric Modeling.

    ERIC Educational Resources Information Center

    Adams, J. Alan

    1988-01-01

    Describes experiences for engineering students to develop spatial awareness and reasoning capability. Describes geometric modeling, basic geometric concepts, operations, surface modeling, and conclusions. (YP)

  6. Concurrent logic programming as a hardware description tool

    SciTech Connect

    Dotan, Y.; Arazi, B. . Dept. of Chemical Engineering)

    1990-01-01

    This paper discusses the possibility of developing hardware description languages (HDL's) based on the principles of logic programming. The specific logic programming language used to demonstrate this possibility is Flat Concurrent Prolog (FCP). It is shown explicitly how FCP naturally satisfies the commonly accepted fundamental requirements of a hardware description language. It is then demonstrated how FCP overcomes known disadvantages of the highly acclaimed VHDL. Some other parallel logic programming languages beside FCP are also presented briefly and the possibility of using them for hardware description is discussed.

  7. Documentation of a Regional Aquifer Simulation Model RAQSIM, and a description of support programs applied in the Twin Platte - Middle Republican Study Area, Nebraska

    USGS Publications Warehouse

    Cady, R.E.; Peckenpaugh, J.M.

    1985-01-01

    RAQSIM, a generalized flow model of a groundwater system using finite-element methods, is documented to explain how it works and to demonstrate that it gives valid results. Three support programs that are used to compute recharge and discharge data required as input to RAQSIM are described. RAQSIM was developed to solve transient, two-dimensional, regional groundwater flow problems with isotropic or anisotropic conductance. The model can also simulate radially-symmetric flow to a well and steady-state flow. The mathematical basis, program structure, data input and output procedures, organization of data sets, and program features and options of RAQSIM are discussed. An example , containing listings of data and results and illustrating RAQSIM 's capabilities, is discussed in detail. Two test problems also are discussed comparing RAQSIM 's results with analytical procedures. The first support program described, the PET Program, uses solar radiation and other climatic data in the Jensen-Haise method to compute potential evapotranspiration. The second support program, the Soil-Water Program, uses output from the PET Program, soil characteristics, and the ratio of potential to actual evapotranspiration for each crop to compute infiltration, storage, and removal of water from the soil zone. The third program, the Recharge-Discharge Program, uses output from the Soil-Water Program together with other data to compute recharge and discharge from the groundwater flow system. For each support program, a program listing and examples of the data and results for the Twin Platte-Middle Republican study are provided. In addition, a brief discussion on how each program operates and on procedures for running and modifying these programs are presented. (Author 's abstract)

  8. San Joaquin-Tulare Conjunctive Use Model: Detailed model description

    SciTech Connect

    Quinn, N.W.T.

    1992-03-01

    The San Joaquin - Tulare Conjunctive Use Model (SANTUCM) was originally developed for the San Joaquin Valley Drainage Program to evaluate possible scenarios for long-term management of drainage and drainage - related problems in the western San Joaquin Valley of California. A unique aspect of this model is its coupling of a surface water delivery and reservoir operations model with a regional groundwater model. The model also performs salinity balances along the tributaries and along the main stem of the San Joaquin River to allow assessment of compliance with State Water Resources Control Board water quality objectives for the San Joaquin River. This document is a detailed description of the various subroutines, variables and parameters used in the model.

  9. Prekindergarten Program Description, 1990-91.

    ERIC Educational Resources Information Center

    Kirkpatrick, Nanda D.; And Others

    Characteristics of the Houston, Texas, Independent School District (HISD) prekindergarten program are reported. Implemented in 1985, and largely funded by the state, the program is offered to 4-year-old students who are classified as limited English proficient (LEP) or are from families with an income at or below the subsistence level.…

  10. Solid Waste Program technical baseline description

    SciTech Connect

    Carlson, A.B.

    1994-07-01

    The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

  11. 19 CFR 122.171 - Description of program.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... TREASURY AIR COMMERCE REGULATIONS Air Carrier Smuggling Prevention Program § 122.171 Description of program. The Air Carrier Smuggling Prevention Program (ACSPP) is designed to enlist the cooperation of the air carriers, as defined in 19 U.S.C. 1584 note, in Customs efforts to prevent the smuggling of...

  12. World Perspective Case Descriptions on Educational Programs for Adults: Portugal.

    ERIC Educational Resources Information Center

    Soares de Melo, Alvaro; Cristovao, Artur F. A. C.

    The case descriptions of two adult education programs in Portual contained in this document are part of a set that reflects a cooperative effort by adult educators to increase international understanding of various educational programs for adults in their societal context. A face sheet for each program provides this information: name,…

  13. World Perspective Case Descriptions on Educational Programs for Adults: Yugoslavia.

    ERIC Educational Resources Information Center

    Rebesko, Branco; And Others

    These eight case descriptions of adult education programs in Yugoslavia are part of a set that reflects a cooperative effort by adult educators to increase international understanding of various educational programs for adults in their societal context. A face sheet for each program provides this information: name, organization, and address of the…

  14. Towards Reproducible Descriptions of Neuronal Network Models

    PubMed Central

    Nordlie, Eilen; Gewaltig, Marc-Oliver; Plesser, Hans Ekkehard

    2009-01-01

    Progress in science depends on the effective exchange of ideas among scientists. New ideas can be assessed and criticized in a meaningful manner only if they are formulated precisely. This applies to simulation studies as well as to experiments and theories. But after more than 50 years of neuronal network simulations, we still lack a clear and common understanding of the role of computational models in neuroscience as well as established practices for describing network models in publications. This hinders the critical evaluation of network models as well as their re-use. We analyze here 14 research papers proposing neuronal network models of different complexity and find widely varying approaches to model descriptions, with regard to both the means of description and the ordering and placement of material. We further observe great variation in the graphical representation of networks and the notation used in equations. Based on our observations, we propose a good model description practice, composed of guidelines for the organization of publications, a checklist for model descriptions, templates for tables presenting model structure, and guidelines for diagrams of networks. The main purpose of this good practice is to trigger a debate about the communication of neuronal network models in a manner comprehensible to humans, as opposed to machine-readable model description languages. We believe that the good model description practice proposed here, together with a number of other recent initiatives on data-, model-, and software-sharing, may lead to a deeper and more fruitful exchange of ideas among computational neuroscientists in years to come. We further hope that work on standardized ways of describing—and thinking about—complex neuronal networks will lead the scientific community to a clearer understanding of high-level concepts in network dynamics, and will thus lead to deeper insights into the function of the brain. PMID:19662159

  15. Visualisation and integration of G protein-coupled receptor related information help the modelling: description and applications of the Viseur program.

    PubMed

    Campagne, F; Jestin, R; Reversat, J L; Bernassau, J M; Maigret, B

    1999-11-01

    G Protein-Coupled Receptors (GPCRs) constitute a superfamily of receptors that forms an important therapeutic target. The number of known GPCR sequences and related information increases rapidly. For these reasons, we are developing the Viseur program to integrate the available information related to GPCRs. The Viseur program allows one to interactively visualise and/or modify the sequences, transmembrane areas, alignments, models and results of mutagenesis experiments in an integrated environment. This integration increases the ease of modelling GPCRs: visualisation and manipulation improvements enable easier databank interrogation and interpretation. Unique program features include: (i) automatic construction of 'Snake-like' diagrams or hyperlinked GPCR molecular models to HTML or VRML and (ii) automatic access to a mutagenesis data server through the Internet. The novel algorithms or methods involved are presented, followed by the overall complementary features of the program. Finally, we present two applications of the program: (i) an automatic construction of GPCR snake-like diagrams for the GPCRDB WWW server, and (ii) a preparation of the modelling of the 5HT receptor subtypes. The interest of the direct access to mutagenesis results through an alignment and a molecular model are discussed. The Viseur program, which runs on SGI workstations, is freely available and can be used for preparing the modelling of integral membrane proteins or as an alignment editor tool. PMID:10584220

  16. 8 CFR 245a.30 - Description of program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... OF THE IMMIGRATION AND NATIONALITY ACT LIFE Act Amendments Family Unity Provisions § 245a.30 Description of program. This Subpart C implements the Family Unity provisions of section 1504 of the LIFE...

  17. 47 CFR 79.3 - Video description of video programming.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... will be July 1, 2018, based on the ratings for the time period October 2016-September 2017; and so on... burdensome: (i) The nature and cost of providing video description of the programming; (ii) The impact on...

  18. 47 CFR 79.3 - Video description of video programming.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... will be July 1, 2018, based on the ratings for the time period October 2016-September 2017; and so on... burdensome: (i) The nature and cost of providing video description of the programming; (ii) The impact on...

  19. 47 CFR 79.3 - Video description of video programming.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... will be July 1, 2018, based on the ratings for the time period October 2016-September 2017; and so on... burdensome: (i) The nature and cost of providing video description of the programming; (ii) The impact on...

  20. 8 CFR 245a.30 - Description of program.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... IMMIGRATION AND NATIONALITY ACT LIFE Act Amendments Family Unity Provisions § 245a.30 Description of program. This Subpart C implements the Family Unity provisions of section 1504 of the LIFE Act...

  1. 8 CFR 245a.30 - Description of program.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... OF THE IMMIGRATION AND NATIONALITY ACT LIFE Act Amendments Family Unity Provisions § 245a.30 Description of program. This Subpart C implements the Family Unity provisions of section 1504 of the LIFE...

  2. 8 CFR 245a.30 - Description of program.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... IMMIGRATION AND NATIONALITY ACT LIFE Act Amendments Family Unity Provisions § 245a.30 Description of program. This Subpart C implements the Family Unity provisions of section 1504 of the LIFE Act...

  3. 8 CFR 245a.30 - Description of program.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... IMMIGRATION AND NATIONALITY ACT LIFE Act Amendments Family Unity Provisions § 245a.30 Description of program. This Subpart C implements the Family Unity provisions of section 1504 of the LIFE Act...

  4. 40 CFR 501.12 - Program description.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... tracking and enforcement program (see 40 CFR 501.16 and 501.17). (f)(1) An inventory of all POTWs and other TWTDS that are subject to regulations promulgated pursuant to 40 CFR part 503 and subject to the State... 501.12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE...

  5. 40 CFR 501.12 - Program description.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... tracking and enforcement program (see 40 CFR 501.16 and 501.17). (f)(1) An inventory of all POTWs and other TWTDS that are subject to regulations promulgated pursuant to 40 CFR part 503 and subject to the State... 501.12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE...

  6. 40 CFR 501.12 - Program description.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... tracking and enforcement program (see 40 CFR 501.16 and 501.17). (f)(1) An inventory of all POTWs and other TWTDS that are subject to regulations promulgated pursuant to 40 CFR part 503 and subject to the State... 501.12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE...

  7. 40 CFR 501.12 - Program description.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... tracking and enforcement program (see 40 CFR 501.16 and 501.17). (f)(1) An inventory of all POTWs and other TWTDS that are subject to regulations promulgated pursuant to 40 CFR part 503 and subject to the State... 501.12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE...

  8. 40 CFR 501.12 - Program description.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... tracking and enforcement program (see 40 CFR 501.16 and 501.17). (f)(1) An inventory of all POTWs and other TWTDS that are subject to regulations promulgated pursuant to 40 CFR part 503 and subject to the State... 501.12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE...

  9. PROGRAM DESCRIPTION FOR SPECIAL EDUCATION. (TITLE SUPPLIED).

    ERIC Educational Resources Information Center

    Michigan State Board of Education, Lansing.

    GUIDELINES COVER THE PLANNING AND OPERATION OF EDUCATIONAL PROGRAMS FOR HANDICAPPED CHILDREN. PROCEDURES ARE STATED FOR DEVELOPING SERVICES FOR THOSE WITH HEARING, VISUAL, OR PHYSICAL HANDICAPS AND THE HOMEBOUND OR HOSPITALIZED. ACCOMMODATING THE CRIPPLED IN REGULAR BUILDINGS, PROVIDING PHYSICAL, OCCUPATIONAL, AND SPEECH THERAPY, AND ARRANGING…

  10. 15 CFR 290.3 - Program description.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... transfer advanced manufacturing technologies, processes, and methods as defined in § 290.2 to small and... of the target firms. The advanced manufacturing technology which is the focus of the Centers is the... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers...

  11. 15 CFR 290.3 - Program description.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... transfer advanced manufacturing technologies, processes, and methods as defined in § 290.2 to small and... of the target firms. The advanced manufacturing technology which is the focus of the Centers is the... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers...

  12. 15 CFR 290.3 - Program description.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... transfer advanced manufacturing technologies, processes, and methods as defined in § 290.2 to small and... of the target firms. The advanced manufacturing technology which is the focus of the Centers is the... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers...

  13. 15 CFR 290.3 - Program description.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... transfer advanced manufacturing technologies, processes, and methods as defined in § 290.2 to small and... of the target firms. The advanced manufacturing technology which is the focus of the Centers is the... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers...

  14. Description of Professional Master's Athletic Training Programs

    ERIC Educational Resources Information Center

    Bowman, Thomas G.; Pitney, William A.; Mazerolle, Stephanie M.; Dodge, Thomas M.

    2015-01-01

    Context: Professional master's (PM) athletic training programs (ATPs) are becoming more popular as the profession debates what the entry-level degree should be for athletic training. More information is needed related to the potential benefits of PM ATPs. Objective: Describe the Commission on Accreditation of Athletic Training Education (CAATE)…

  15. Descriptive Study of the Family English Literacy Program. Final Report.

    ERIC Educational Resources Information Center

    Atlantic Resources Corp., Reston, VA.

    Family English literacy programs are designed to help limited-English-proficient adults and out-of-school youth achieve competence in the English language. The purpose of the study presented here was to provide a thorough description of the 54 Title VII Family English Literacy (FEL) programs funded from 1985 through 1989, including program…

  16. World Perspective Case Descriptions on Educational Programs for Adults: Chile.

    ERIC Educational Resources Information Center

    Donoso, Patricio; Gajardo, Marcela

    This document contains two case studies of adult education programs in Chile. Both case studies begin with a "face sheet" on which is recorded basic information about the program and the description. The first case study, prepared by Patricio Donoso, reports on Centro El Canelo de Nos, an inservice center for educators who work with Chile's most…

  17. 19 CFR 123.71 - Description of program.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Description of program. 123.71 Section 123.71 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS RELATIONS WITH CANADA AND MEXICO Land Border Carrier Initiative Program §...

  18. Descriptive Qualities of Athletic Training Education Program Directors

    ERIC Educational Resources Information Center

    Leone, James E.; Judd, Michael R.; Colandreo, Robert M.

    2008-01-01

    Context: Limited literature explores professional preparation of program directors (PD) to lead an athletic training education program (ATEP). Objective: To explore challenges, effectiveness, leadership, and PD role selection. Design: Descriptive and qualitative exploratory email survey. Setting: Educational. Participants: Emails were sent to 345…

  19. Child and Family Resource Program (Salem, Oregon). Program Description.

    ERIC Educational Resources Information Center

    Development Associates, Inc., Washington, DC.

    Successful coordination of social service agencies, aimed at serving eligible families with children from the prenatal period to age 8, has been the focus of the Child and Family Resource Program (CFRP) in Salem, Oregon, one of 11 sites in this Head Start affiliated program. The Salem program also includes an infant-toddler program emphasizing…

  20. RESFEN 3.1: Program description

    SciTech Connect

    Mitchell, R.; Huang, J.; Arasteh, D.; Sullivan, R.; Phillip, S.

    1999-08-01

    Today's energy-efficient windows can dramatically lower the heating and cooling costs associated with windows while increasing occupant comfort and minimizing window surface condensation problems. However, consumers are often confused about how to pick the most efficient window for a residence. Product information typically offers window properties U-factors or R-values, Solar Heat Gain Coefficients or Shading Coefficients, and air leakage rates. However, the relative importance of these properties depends on site-and building-specific conditions. Furthermore, these properties are based on static evaluation conditions that are very different from the real situation a window will be used in. A computer tool such as RESFEN can help consumers and builders pick the most energy-efficient and cost-effective window for a given application, whether it is a new home, an addition, or a window replacement. It calculates heating and cooling energy use and associated costs as well as peak heating and cooling demand for specific window products. Users define a specific scenario by specifying house type (single-story or two-story), geographic location, orientation, electricity and gas cost, and building configuration details (such as wall, floor, and HVAC system type). Users also specify size, shading and thermal properties of the window they wish to investigate. The thermal properties that RESFEN requires are U-factor, Solar Heat Gain Coefficient, and air leakage rate. RESFEN calculates the energy and cost implications of the window compared to an insulated wall. The relative energy and cost impacts of two different windows can be compared . RESFEN 3.0 was a major improvement over previous versions because it performs hourly calculations using aversion of the DOE 21E (LBL 1980, Winkelmann et al. 1993) energy analysis simulation program. RESFEN 3.1 incorporates additional improvements including input assumptions for the base case buildings taken from the National Fenestration

  1. Child and Family Resource Program (Las Vegas, Nevada). Program Description.

    ERIC Educational Resources Information Center

    Development Associates, Inc., Washington, DC.

    An infant-toddler program of parent training in child growth and development, based primarily in the home, has become the major focus of the Child and Family Resource Program (EFRP) in Las Vegas, Nevada, one of 11 sites in this Head Start affiliated program. This report describes and evaluates: (1) the goals and operational objectives of the…

  2. The AutoBayes Program Synthesis System: System Description

    NASA Technical Reports Server (NTRS)

    Fischer, Bernd; Pressburger, Thomas; Rosu, Grigore; Schumann, Johann; Norvog, Peter (Technical Monitor)

    2001-01-01

    AUTOBAYES is a fully automatic program synthesis system for the statistical data analysis domain. Its input is a concise description of a data analysis problem in the form of a statistical model; its output is optimized and fully documented C/C++ code which can be linked dynamically into the Matlab and Octave environments. AUTOBAYES synthesizes code by a schema-guided deductive process. Schemas (i.e., code templates with associated semantic constraints) are applied to the original problem and recursively to emerging subproblems. AUTOBAYES complements this approach by symbolic computation to derive closed-form solutions whenever possible. In this paper, we concentrate on the interaction between the symbolic computations and the deductive synthesis process. A statistical model specifies for each problem variable (i.e., data or parameter) its properties and dependencies in the form of a probability distribution, A typical data analysis task is to estimate the best possible parameter values from the given observations or measurements. The following example models normal-distributed data but takes prior information (e.g., from previous experiments) on the data's mean value and variance into account.

  3. Short description of mathematical support programs for space experiments in the Interkosmos program

    NASA Technical Reports Server (NTRS)

    Elyasberg, P. Y.

    1979-01-01

    A synopsis of programs of mathematical support designed at the Institute for Cosmic Research of the USSR Academy of Sciences for cosmic experiments being conducted in the Interkosmos Program is presented. A short description of the appropriate algorithm is given.

  4. A task description model for robotic rehabilitation.

    PubMed

    Carmichael, Marc G; Liu, Dikai

    2012-01-01

    The desire to produce robots to aid in physical neurorehabilitation has led to the control paradigm Assistance-As-Needed. This paradigm aims to assist patients in performing physical rehabilitation tasks whilst providing the least amount of assistance required, maximizing the patient's effort which is essential for recovery. Ideally the provided assistance equals the gap between the capability required to perform the task and the patient's available capability. Current implementations derive a measure of this gap by critiquing task performance based on some criteria. This paper presents a task description model for tasks performed by a patient's limb, allowing physical requirements to be calculated. Applied to two upper limb tasks typical of rehabilitation and daily activities, the effect of task variations on the task's physical requirements are observed. It is proposed that using the task description model to compensate for changing task requirements will allow better support by providing assistance closer to the true needs of the patient. PMID:23366577

  5. Child and Family Resource Program (Modesto, California). Program Description.

    ERIC Educational Resources Information Center

    Development Associates, Inc., Washington, DC.

    Migrant farm workers were the primary target of the Child and Family Resource Program (CFRP) in Modesto, California, one of 11 sites in this Head Start affiliated program. The CFRP focused on an infant day care center operation providing day care service to families working in the agricultural fields. This report describes and evaluates: (1) the…

  6. Child and Family Resource Program (Poughkeepsie, New York). Program Description.

    ERIC Educational Resources Information Center

    Development Associates, Inc., Washington, DC.

    This report describes and evaluates the Child and Family Resource Program (CERP) in Poughkeepsie, New York, one of 11 sites of this Head Start-affiliated program. Placing a professional in appropriate community agencies to help bring about changes in the social service delivery system (the Resource Agency Person (RAP) concept) is considered a…

  7. 24 CFR 983.5 - Description of the PBV program.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...” rental assistance at 24 CFR 982.1(b).) (2) The PHA enters into a HAP contract with an owner for units in... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Description of the PBV program. 983.5 Section 983.5 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN...

  8. 24 CFR 983.5 - Description of the PBV program.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...” rental assistance at 24 CFR 982.1(b).) (2) The PHA enters into a HAP contract with an owner for units in... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Description of the PBV program. 983.5 Section 983.5 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN...

  9. 24 CFR 983.5 - Description of the PBV program.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...” rental assistance at 24 CFR 982.1(b).) (2) The PHA enters into a HAP contract with an owner for units in... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Description of the PBV program. 983.5 Section 983.5 Housing and Urban Development Regulations Relating to Housing and Urban...

  10. 24 CFR 983.5 - Description of the PBV program.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...” rental assistance at 24 CFR 982.1(b).) (2) The PHA enters into a HAP contract with an owner for units in... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Description of the PBV program. 983.5 Section 983.5 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN...

  11. A Descriptive Review of Florida's Environmental Education Grants Programs

    ERIC Educational Resources Information Center

    Monroe, Martha C.; Marcinkowski, Thomas; Chang, Janice; Kauchek, Lynna; Smith, Renee; Ira, Greg

    2005-01-01

    A statewide environmental education (EE) grants program operated in Florida from 1990 to 2003. Interviews of grant recipients were undertaken to explore and describe the contributions of these funded projects to EE in the state. This report of the descriptive review presents and summarizes findings from these interviews. Grant funds increased the…

  12. IMP: Interactive mass properties program. Volume 1: Program description

    NASA Technical Reports Server (NTRS)

    Stewart, W. A.

    1976-01-01

    A method of computing a weights and center of gravity analysis of a flight vehicle using interactive graphical capabilities of the Adage 340 computer is described. The equations used to calculate area, volume, and mass properties are based on elemental surface characteristics. The input/output methods employ the graphic support of the Adage computer. Several interactive program options are available for analyzing the mass properties of a vehicle. These options are explained.

  13. Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 2: Program descriptions

    NASA Technical Reports Server (NTRS)

    1983-01-01

    The structure and functions of each reporting software program for the Software Engineering Laboratory data base are described. Baseline diagrams, module descriptions, and listings of program generation files are included.

  14. A Program Budgeting Cost Model for School District Planning.

    ERIC Educational Resources Information Center

    Dougharty, Laurence A.; And Others

    This report provides a detailed description of an education program cost model designed to accept descriptions of the size and composition of resources used in a particular program and translate them into an estimate of program cost, for convenient comparison of alternatives. The model also translates ("crosswalks") the program budget into…

  15. Optical Hall effect-model description: tutorial.

    PubMed

    Schubert, Mathias; Kühne, Philipp; Darakchieva, Vanya; Hofmann, Tino

    2016-08-01

    The optical Hall effect is a physical phenomenon that describes the occurrence of magnetic-field-induced dielectric displacement at optical wavelengths, transverse and longitudinal to the incident electric field, and analogous to the static electrical Hall effect. The electrical Hall effect and certain cases of the optical Hall effect observations can be explained by extensions of the classic Drude model for the transport of electrons in metals. The optical Hall effect is most useful for characterization of electrical properties in semiconductors. Among many advantages, while the optical Hall effect dispenses with the need of electrical contacts, electrical material properties such as effective mass and mobility parameters, including their anisotropy as well as carrier type and density, can be determined from the optical Hall effect. Measurement of the optical Hall effect can be performed within the concept of generalized ellipsometry at an oblique angle of incidence. In this paper, we review and discuss physical model equations, which can be used to calculate the optical Hall effect in single- and multiple-layered structures of semiconductor materials. We define the optical Hall effect dielectric function tensor, demonstrate diagonalization approaches, and show requirements for the optical Hall effect tensor from energy conservation. We discuss both continuum and quantum approaches, and we provide a brief description of the generalized ellipsometry concept, the Mueller matrix calculus, and a 4×4 matrix algebra to calculate data accessible by experiment. In a follow-up paper, we will discuss strategies and approaches for experimental data acquisition and analysis. PMID:27505654

  16. BWR Full Integral Simulation Test (FIST) program: facility description report

    SciTech Connect

    Stephens, A G

    1984-09-01

    A new boiling water reactor safety test facility (FIST, Full Integral Simulation Test) is described. It will be used to investigate small breaks and operational transients and to tie results from such tests to earlier large-break test results determined in the TLTA. The new facility's full height and prototypical components constitute a major scaling improvement over earlier test facilities. A heated feedwater system, permitting steady-state operation, and a large increase in the number of measurements are other significant improvements. The program background is outlined and program objectives defined. The design basis is presented together with a detailed, complete description of the facility and measurements to be made. An extensive component scaling analysis and prediction of performance are presented.

  17. Modeling EERE deployment programs

    SciTech Connect

    Cort, K. A.; Hostick, D. J.; Belzer, D. B.; Livingston, O. V.

    2007-11-01

    The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address possible improvements to the modeling process, and note gaps in knowledge for future research.

  18. Environmental Program Description for the Tank Farm Contractor

    SciTech Connect

    POWELL, P.A.

    2000-04-20

    This Environmental Program Description has been developed in support of the Integrated Environmental, Safety, and Health Management System and consistent with the goals of DOE/RL-96-50, Hanford Strategic Plan. This Environmental Program Plan was developed in support of the Integrated Environment, Safety, and Health Management System Description for the Tank Farm Contractor (ISMS) (RPP-MP-003), which establishes a single, defined environmental, safety, and health management system that integrates requirements into the work planning and execution processes to protect workers, the public, and the environment. The ISMS also provides mechanisms for increasing worker involvement in work planning, including hazard and environmental impact identification, analysis, and control; work execution; and feedback/improvement processes. The ISMS plan consists of five core functions. Each section of this plan describes the activities (formerly known as the Tank Waste Remediation System) of the Tank Farm Contractor (TFC) environmental organization according to the following core functions: Establish Environmental Policy and Define Work Scope; Identify Hazards, Environmental Impacts, and Requirements; Analyze Hazards and Environmental Impacts and Implement Controls; Provide Feedback and Continuous Improvement; and Perform Work within Controls.

  19. Model description document for a computer program for the emulation/simulation of a space station environmental control and life support system (ESCM)

    NASA Technical Reports Server (NTRS)

    Yanosy, James L.

    1988-01-01

    Emulation/Simulation Computer Model (ESCM) computes the transient performance of a Space Station air revitalization subsystem with carbon dioxide removal provided by a solid amine water desorbed subsystem called SAWD. This manual describes the mathematical modeling and equations used in the ESCM. For the system as a whole and for each individual component, the fundamental physical and chemical laws which govern their operations are presented. Assumptions are stated, and when necessary, data is presented to support empirically developed relationships.

  20. Water Resources Research Grant Program project descriptions, fiscal year 1989

    USGS Publications Warehouse

    Lew, Melvin, (compiler); Murray, Pamela D.

    1990-01-01

    Information on the 36 new projects funded by the US Geological Survey 's (USGS) Water Resources Research Grant Program in fiscal year 1989 and on 27 projects completed during the year, is presented. For the new projects, the report gives the grant number, project title, performing organization, principal investigator(s), project duration, and a project description that includes: (1) identification of water-related problems and problem-solution approach; (2) contribution to problem solution; (3) objectives; and (4) approach. The 36 projects include 6 in groundwater transport and flow, 4 in the water quality treatment processes, 5 in water quality processes, 5 in biology, 9 in economics and management, and 7 in climate and hydrology. For the 27 completed projects, the report gives the grant number, project title, performing organization, principal investigator(s), starting date, date of receipt of final report, and an abstract of the final report. Each project description provides the information needed to obtain a copy of the final report. The report also contains tables showing: (1) proposals received according to area of research interest; (2) grant awards and funding according to area of research interest; (3) proposals received according to type of submitting organization; and (4) awards and funding according to type of organization. (Lantz-PTT)

  1. Water Resources Research Grant Program Project Descriptions: Fiscal Year 1988

    USGS Publications Warehouse

    Lew, Melvin, (compiler); McCoy, Beverly M.

    1989-01-01

    This report contains information on the 38 new projects funded by the U.S. Geological Survey's Water Resources Research Grant Program in fiscal year 1988 and on 11 projects completed during the year. For the new projects, the report gives the grant number, project title, performing organization, principal investigator(s), project duration, and a project description that includes: (1) identification of water-related problems and problem-solution approach, (2) contribution to problem solution, (3) objectives, and (4) approach. The 38 projects include 14 in the area of ground-water quality problems, 10 in the science and technology of water-quality management, 4 in climate variability and the hydrologic cycle, 7 in institutional change in water-resources management, and 3 in miscellaneous water-resources management problems. For the 11 completed projects, the report gives the grant number, project title, performing organization, principal investigator(s), starting date, date of receipt of final report, and an abstract of the final report. Each project description provides the information needed to obtain a copy of the final report. The report also contains tables showing (1) proposals received according to area of research interest, (2) grant awards and funding according to area of research interest, (3) proposals received according to type of submitting organization, and (4) awards and funding according to type of organization.

  2. Water Resources Research Grant Program project descriptions, fiscal year 1986

    USGS Publications Warehouse

    Branch of Research Grants and Contracts

    1986-01-01

    Information is presented on the 43 projects funded by the United States Geological Survey 's Water Resources Grant Program in fiscal year 1986. The report gives the grant number; project title; performing organization; principal investigator(s); dates; and a project description which includes (1) identification of the water related problems and problem-solution approach, (2) contribution to problem solution, (3) objectives, (4) approach, and (5) result users. The 43 projects include 14 in the area of groundwater management, 6 in surface-water management, 2 in systems-operating/planning, 3 in irrigation management, 8 in desalination/reuse, 6 in economic/institutional studies, and 4 in climate variability. The reports contain tables showing (1) funding according to research topic, (2) projects funded to type of submitting organization, (3) proposals received, research topic, and funding levels, and (4) submitting organization. A comparison is given to fiscal year 1985 in each case. (USGS)

  3. SIRU utilization. Volume 2: Software description and program documentation

    NASA Technical Reports Server (NTRS)

    Oehrle, J.; Whittredge, R.

    1973-01-01

    A complete description of the additional analysis, development and evaluation provided for the SIRU system as identified in the requirements for the SIRU utilization program is presented. The SIRU configuration is a modular inertial subsystem with hardware and software features that achieve fault tolerant operational capabilities. The SIRU redundant hardware design is formulated about a six gyro and six accelerometer instrument module package. The modules are mounted in this package so that their measurement input axes form a unique symmetrical pattern that corresponds to the array of perpendiculars to the faces of a regular dodecahedron. This six axes array provides redundant independent sensing and the symmetry enables the formulation of an optimal software redundant data processing structure with self-contained fault detection and isolation (FDI) capabilities. Documentation of the additional software and software modifications required to implement the utilization capabilities includes assembly listings and flow charts

  4. Environmental Program Description for the Tank Farm Contractor

    SciTech Connect

    POWELL, P.A.

    2001-01-02

    This Environmental Program Plan was developed in support of the Integrated Environment, Safety and Health Management System Description for the Tank Farm Contractor (ISMS) (RPP-MP-003), which establishes a single, defined environmental, safety, and health management system that integrates requirements into the work planning and execution processes to protect workers, the public, and the environment. The ISMS also provides mechanisms for increasing worker involvement in work planning, including hazard and environmental impact identification, analysis, and control; work execution; and feedback/improvement processes. The ISMS plan consists of five core functions. Each section of this plan describes the activities (formerly known as the Tank Waste Remediation System) of the Tank Farm Contractor (TFC) environmental organization according to the following core functions: Perform Work within Controls; Establish Environmental Policy and Define Work Scope; Identify Hazards, Environmental Impacts, and Requirements; Analyze Hazards and Environmental Impacts and Implement Controls; an Provide Feedback and Continuous Improvement.

  5. Program MASTERCALC: an interactive computer program for radioanalytical computations. Description and operating instructions

    SciTech Connect

    Goode, W.

    1980-10-01

    MASTERCALC is a computer program written to support radioanalytical computations in the Los Alamos Scientific Laboratory (LASL) Environmental Surveillance Group. Included in the program are routines for gross alpha and beta, /sup 3/H, gross gamma, /sup 90/Sr and alpha spectroscopic determinations. A description of MASTERCALC is presented and its source listing is included. Operating instructions and example computing sessions are given for each type of analysis.

  6. Mountain View College's Cognitive Style Program: A Description.

    ERIC Educational Resources Information Center

    Ehrhardt, Harryette B.

    Several issues are discussed related to the administration and operation of Mountain View College's (MVC) Cognitive Style Program, an assessment system based on the Modified Hill Model, which determines preferred learning styles for each student and thus aids the student in selecting appropriate classroom environments. After introductory material…

  7. Modeling EERE Deployment Programs

    SciTech Connect

    Cort, K. A.; Hostick, D. J.; Belzer, D. B.; Livingston, O. V.

    2007-11-01

    This report compiles information and conclusions gathered as part of the “Modeling EERE Deployment Programs” project. The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address possible improvements to the modeling process, and note gaps in knowledge in which future research is needed.

  8. The Interdependent Learning Model. Program Summary.

    ERIC Educational Resources Information Center

    Far West Lab. for Educational Research and Development, Berkeley, CA.

    This document is the sixth in a series of 12 early childhood program descriptions compiled by the Far West Laboratory for Educational Research and Development. The program described here is the Interdependent Learning Model located at the Institute for Developmental Studies at New York University in New York City. The Interdependent Learning Model…

  9. LACIE performance predictor final operational capability program description, volume 3

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The requirements and processing logic for the LACIE Error Model program (LEM) are described. This program is an integral part of the Large Area Crop Inventory Experiment (LACIE) system. LEM is that portion of the LPP (LACIE Performance Predictor) which simulates the sample segment classification, strata yield estimation, and production aggregation. LEM controls repetitive Monte Carlo trials based on input error distributions to obtain statistical estimates of the wheat area, yield, and production at different levels of aggregation. LEM interfaces with the rest of the LPP through a set of data files.

  10. 10 CFR Appendix A to Part 605 - The Energy Research Program Office Descriptions

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false The Energy Research Program Office Descriptions A Appendix A to Part 605 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS THE OFFICE OF ENERGY RESEARCH FINANCIAL ASSISTANCE PROGRAM Pt. 605, App. A Appendix A to Part 605—The Energy Research Program Office Descriptions 1. Basic Energy...

  11. 40 CFR 239.4 - Narrative description of state permit program.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Narrative description of state permit program. 239.4 Section 239.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES REQUIREMENTS FOR STATE PERMIT PROGRAM DETERMINATION OF ADEQUACY State Program Application § 239.4 Narrative description of state...

  12. 40 CFR 239.4 - Narrative description of state permit program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Narrative description of state permit program. 239.4 Section 239.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES REQUIREMENTS FOR STATE PERMIT PROGRAM DETERMINATION OF ADEQUACY State Program Application § 239.4 Narrative description of state...

  13. Environmental Program Description for the Tank Farm Contractor

    SciTech Connect

    POWELL, P.A.

    2002-07-18

    The Environmental Services organization's mission is to achieve effective environmental compliance and stewardship in managing and closing the tank farms. This Environmental Program Plan was developed in support of that mission and the Integrated Environment, Safety, and Health Management System Description for the Tank Farm Contractor (ISMS) (RPP-MP-003), which establishes a single, defined environmental, safety, and health management system that integrates requirements into the work planning and execution processes to protect workers, the public, and the environment. The ISMS also provides mechanisms for increasing worker involvement in work planning, including hazard and environmental impact identification, analysis, and control; work execution; and feedback/improvement processes. The ISMS consists of five core functions. Each section of this plan describes the activities of the Tank Farm Contractor (TFC) environmental and waste management organization according to the following core functions: (1) Perform Work within Controls; (2) Establish Environmental Policy and Define Work Scope; (3) Identify Hazards, Environmental Impacts, and Requirements; (4) Analyze Hazards and Environmental Impacts and Implement Controls; and (5) Provide Feedback and Continuous Improvement.

  14. Environmental Compliance and Protection Program Description Oak Ridge, Tennessee

    SciTech Connect

    Bechtel Jacobs

    2009-02-26

    The objective of the Environmental Compliance and Protection (EC and P) Program Description (PD) is to establish minimum environmental compliance requirements and natural resources protection goals for the Bechtel Jacobs Company LLC (BJC) Oak Ridge Environmental Management Cleanup Contract (EMCC) Contract Number DE-AC05-98OR22700-M198. This PD establishes the work practices necessary to ensure protection of the environment during the performance of EMCC work activities on the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, by BJC employees and subcontractor personnel. Both BJC and subcontractor personnel are required to implement this PD. A majority of the decontamination and demolition (D and D) activities and media (e.g., soil and groundwater) remediation response actions at DOE sites on the ORR are conducted under the authority of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). CERCLA activities are governed by individual CERCLA decision documents (e.g., Record of Decision [ROD] or Action Memorandum) and according to requirements stated in the Federal Facility Agreement for the Oak Ridge Reservation (DOE 1992). Applicable or relevant and appropriate requirements (ARARs) for the selected remedy are the requirements for environmental remediation responses (e.g., removal actions and remedial actions) conducted under CERCLA.

  15. Shell model description of zirconium isotopes

    SciTech Connect

    Sieja, K.; Nowacki, F.; Langanke, K.; Martinez-Pinedo, G.

    2009-06-15

    We calculate the low-lying spectra and several high-spin states of zirconium isotopes (Z=40) with neutron numbers from N=50 to N=58 using a large valence space with the {sup 78}Ni inert core, which a priori allows one to study the interplay between spherical and deformed configurations, necessary for the description of nuclides in this part of the nuclear chart. The effective interaction is derived by monopole corrections of the realistic G matrix. We reproduce essential nuclear properties, such as subshell closures in {sup 96}Zr and {sup 98}Zr. The spherical-to-deformed shape transition in {sup 100}Zr is addressed as well.

  16. Modeling EERE Deployment Programs

    SciTech Connect

    Cort, Katherine A.; Hostick, Donna J.; Belzer, David B.; Livingston, Olga V.

    2007-11-08

    The purpose of this report is to compile information and conclusions gathered as part of three separate tasks undertaken as part of the overall project, “Modeling EERE Deployment Programs,” sponsored by the Planning, Analysis, and Evaluation office within the Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE). The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address improvements to modeling in the near term, and note gaps in knowledge where future research is needed.

  17. Descriptive Linear modeling of steady-state visual evoked response

    NASA Technical Reports Server (NTRS)

    Levison, W. H.; Junker, A. M.; Kenner, K.

    1986-01-01

    A study is being conducted to explore use of the steady state visual-evoke electrocortical response as an indicator of cognitive task loading. Application of linear descriptive modeling to steady state Visual Evoked Response (VER) data is summarized. Two aspects of linear modeling are reviewed: (1) unwrapping the phase-shift portion of the frequency response, and (2) parsimonious characterization of task-loading effects in terms of changes in model parameters. Model-based phase unwrapping appears to be most reliable in applications, such as manual control, where theoretical models are available. Linear descriptive modeling of the VER has not yet been shown to provide consistent and readily interpretable results.

  18. Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications II. Users Manual and Program Description. 2; Users Manual and Program Description

    NASA Technical Reports Server (NTRS)

    McBride, Bonnie J.; Gordon, Sanford

    1996-01-01

    This users manual is the second part of a two-part report describing the NASA Lewis CEA (Chemical Equilibrium with Applications) program. The program obtains chemical equilibrium compositions of complex mixtures with applications to several types of problems. The topics presented in this manual are: (1) details for preparing input data sets; (2) a description of output tables for various types of problems; (3) the overall modular organization of the program with information on how to make modifications; (4) a description of the function of each subroutine; (5) error messages and their significance; and (6) a number of examples that illustrate various types of problems handled by CEA and that cover many of the options available in both input and output. Seven appendixes give information on the thermodynamic and thermal transport data used in CEA; some information on common variables used in or generated by the equilibrium module; and output tables for 14 example problems. The CEA program was written in ANSI standard FORTRAN 77. CEA should work on any system with sufficient storage. There are about 6300 lines in the source code, which uses about 225 kilobytes of memory. The compiled program takes about 975 kilobytes.

  19. A system for aerodynamic design and analysis of supersonic aircraft. Part 3: Computer program description

    NASA Technical Reports Server (NTRS)

    Middleton, W. D.; Lundry, J. L.; Coleman, R. G.

    1980-01-01

    The computer program documentation for the design and analysis of supersonic configurations is presented. Schematics and block diagrams of the major program structure, together with subroutine descriptions for each module are included.

  20. Matrix model description of baryonic deformations

    SciTech Connect

    Bena, Iosif; Murayama, Hitoshi; Roiban, Radu; Tatar, Radu

    2003-03-13

    We investigate supersymmetric QCD with N{sub c} + 1 flavors using an extension of the recently proposed relation between gauge theories and matrix models.The impressive agreement between the two sides provides a beautiful confirmation of the extension of the gauge theory-matrix model relation to this case.

  1. 13 CFR 108.10 - Description of the New Markets Venture Capital Program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Description of the New Markets Venture Capital Program. 108.10 Section 108.10 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Introduction to Part 108 § 108.10 Description of...

  2. Program listing for the REEDM (Rocket Exhaust Effluent Diffusion Model) computer program

    NASA Technical Reports Server (NTRS)

    Bjorklund, J. R.; Dumbauld, R. K.; Cheney, C. S.; Geary, H. V.

    1982-01-01

    The program listing for the REEDM Computer Program is provided. A mathematical description of the atmospheric dispersion models, cloud-rise models, and other formulas used in the REEDM model; vehicle and source parameters, other pertinent physical properties of the rocket exhaust cloud and meteorological layering techniques; user's instructions for the REEDM computer program; and worked example problems are contained in NASA CR-3646.

  3. Model Cities Training Program.

    ERIC Educational Resources Information Center

    Tennessee Univ., Chattanooga.

    The Model Cities Training Program, the first in the country, is a 10-session course to be conducted in seminar form under the direction of the University of Tennessee at Chattanooga. The objective is to enable the 50 members of the Community Development Administration Board of Directors to: acquire knowledge of the structure of the Model Cities…

  4. Solid rocket booster performance evaluation model. Volume 1: Engineering description

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The space shuttle solid rocket booster performance evaluation model (SRB-II) is made up of analytical and functional simulation techniques linked together so that a single pass through the model will predict the performance of the propulsion elements of a space shuttle solid rocket booster. The available options allow the user to predict static test performance, predict nominal and off nominal flight performance, and reconstruct actual flight and static test performance. Options selected by the user are dependent on the data available. These can include data derived from theoretical analysis, small scale motor test data, large motor test data and motor configuration data. The user has several options for output format that include print, cards, tape and plots. Output includes all major performance parameters (Isp, thrust, flowrate, mass accounting and operating pressures) as a function of time as well as calculated single point performance data. The engineering description of SRB-II discusses the engineering and programming fundamentals used, the function of each module, and the limitations of each module.

  5. Water Resources Research Grant Program project descriptions, fiscal year 1985

    USGS Publications Warehouse

    U.S. Geological Survey Branch of Research Grants and Contracts

    1985-01-01

    Information on each of the 24 projects funded by the U.S. Geological Survey in FY 1985 under section 105 of Public Law 93-242 (the Water Resources Research Act of 1984) is presented, including the grant number, organization, the period of performance, and a brief description of the work to be carried out. (Lantz-PTT)

  6. World Perspective Case Descriptions on Educational Programs for Adults: India.

    ERIC Educational Resources Information Center

    Jayagopal, R.; Burns, E. P.

    Four adult education programs being conducted in India are described in the case studies in this packet. Two of the projects involve literacy; the third promotes literacy as one part of its community development program, and the fourth trains workers in hotel management and catering technology. The literacy programs are (1) development of a…

  7. Redesign of Library Workflows: Experimental Models for Electronic Resource Description.

    ERIC Educational Resources Information Center

    Calhoun, Karen

    This paper explores the potential for and progress of a gradual transition from a highly centralized model for cataloging to an iterative, collaborative, and broadly distributed model for electronic resource description. The purpose is to alert library managers to some experiments underway and to help them conceptualize new methods for defining,…

  8. Model Checking Abstract PLEXIL Programs with SMART

    NASA Technical Reports Server (NTRS)

    Siminiceanu, Radu I.

    2007-01-01

    We describe a method to automatically generate discrete-state models of abstract Plan Execution Interchange Language (PLEXIL) programs that can be analyzed using model checking tools. Starting from a high-level description of a PLEXIL program or a family of programs with common characteristics, the generator lays the framework that models the principles of program execution. The concrete parts of the program are not automatically generated, but require the modeler to introduce them by hand. As a case study, we generate models to verify properties of the PLEXIL macro constructs that are introduced as shorthand notation. After an exhaustive analysis, we conclude that the macro definitions obey the intended semantics and behave as expected, but contingently on a few specific requirements on the timing semantics of micro-steps in the concrete executive implementation.

  9. Climate system modeling program

    SciTech Connect

    1995-12-31

    The Climate System Modeling Project is a component activity of NSF's Climate Modeling, Analysis and Prediction Program, supported by the Atmospheric Sciences Program, Geosciences Directorate. Its objective is to accelerate progress toward reliable prediction of global and regional climate changes in the decades ahead. CSMP operates through workshops, support for post-docs and graduate students and other collaborative activities designed to promote interdisciplinary and strategic work in support of the overall objective (above) and specifically in three areas, (1) Causes of interdecadal variability in the climate system, (2) Interactions of regional climate forcing with global processes, and (3) Scientific needs of climate assessment.

  10. SRB-3D Solid Rocket Booster performance prediction program. Volume 1: Engineering description/users information manual

    NASA Technical Reports Server (NTRS)

    Winkler, J. C.

    1976-01-01

    The modified Solid Rocket Booster Performance Evaluation Model (SRB-3D) was developed as an extension to the internal ballistics module of the SRB-2 performance program. This manual contains the engineering description of SRB-3D which describes the approach used to develop the 3D concept and an explanation of the modifications which were necessary to implement these concepts.

  11. Description and Rationale for the Planning, Monitoring, and Implementation (PMI) Model: Description.

    ERIC Educational Resources Information Center

    Ford, Valeria A.

    The design of the Planning, Monitoring, and Implementation Model (PMI) and the aspects of the model that make it useful in public schools are the topics of this paper. After the objectives of a program or operation have been identified, the model specifies three additional pieces of information that are needed for an evaluation: inputs, processes,…

  12. Geomagnetic Cutoff Rigidity Computer Program: Theory, Software Description and Example

    NASA Technical Reports Server (NTRS)

    Smart, D. F.; Shea, M. A.

    2001-01-01

    The access of charged particles to the earth from space through the geomagnetic field has been of interest since the discovery of the cosmic radiation. The early cosmic ray measurements found that cosmic ray intensity was ordered by the magnetic latitude and the concept of cutoff rigidity was developed. The pioneering work of Stoermer resulted in the theory of particle motion in the geomagnetic field, but the fundamental mathematical equations developed have 'no solution in closed form'. This difficulty has forced researchers to use the 'brute force' technique of numerical integration of individual trajectories to ascertain the behavior of trajectory families or groups. This requires that many of the trajectories must be traced in order to determine what energy (or rigidity) a charged particle must have to penetrate the magnetic field and arrive at a specified position. It turned out the cutoff rigidity was not a simple quantity but had many unanticipated complexities that required many hundreds if not thousands of individual trajectory calculations to solve. The accurate calculation of particle trajectories in the earth's magnetic field is a fundamental problem that limited the efficient utilization of cosmic ray measurements during the early years of cosmic ray research. As the power of computers has improved over the decades, the numerical integration procedure has grown more tractable, and magnetic field models of increasing accuracy and complexity have been utilized. This report is documentation of a general FORTRAN computer program to trace the trajectory of a charged particle of a specified rigidity from a specified position and direction through a model of the geomagnetic field.

  13. Integrated Data Collection Analysis (IDCA) Program: FY2011 Project Descriptions

    SciTech Connect

    Sandstrom, Mary M.; Brown, Geoffrey W.; Warner, Kirstin F.; Remmers, Daniel L.; Whinnery, LeRoy L.; Shelley, Timothy J.; Reyes, Jose A.; Hsu, Peter C.; Reynolds, John G.

    2012-02-03

    This document provides brief descriptions of research topics for consideration by the IDCA for potential funding in funding in FY 2011. The topics include the utilization of the results from the Proficiency Test developed during FY 2010 to start populating the small-scale safety and thermal testing (SSST) Testing Compendium and revising results from methods modifications. Other research topics were also developed for FY 2011 from issues that arose in the Proficiency Test.

  14. Clinical fellowship training in pathology informatics: A program description

    PubMed Central

    Gilbertson, John R.; McClintock, David S.; Lee, Roy E.; Onozato, Maristela; Kuo, Frank C.; Beckwith, Bruce A.; Yagi, Yukako; Dighe, Anand S.; Gudewicz, Tom M.; Le, Long P.; Wilbur, David C.; Kim, Ji Yeon; Brodsky, Victor B.; Black-Schaffer, Stephen

    2012-01-01

    Background: In 2007, our healthcare system established a clinical fellowship program in pathology informatics. In 2011, the program benchmarked its structure and operations against a 2009 white paper “Program requirements for fellowship education in the subspecialty of clinical informatics”, endorsed by the Board of the American Medical Informatics Association (AMIA) that described a proposal for a general clinical informatics fellowship program. Methods: A group of program faculty members and fellows compared each of the proposed requirements in the white paper with the fellowship program's written charter and operations. The majority of white paper proposals aligned closely with the rules and activities in our program and comparison was straightforward. In some proposals, however, differences in terminology, approach, and philosophy made comparison less direct, and in those cases, the thinking of the group was recorded. After the initial evaluation, the remainder of the faculty reviewed the results and any disagreements were resolved. Results: The most important finding of the study was how closely the white paper proposals for a general clinical informatics fellowship program aligned with the reality of our existing pathology informatics fellowship. The program charter and operations of the program were judged to be concordant with the great majority of specific white paper proposals. However, there were some areas of discrepancy and the reasons for the discrepancies are discussed in the manuscript. Conclusions: After the comparison, we conclude that the existing pathology informatics fellowship could easily meet all substantive proposals put forth in the 2009 clinical informatics program requirements white paper. There was also agreement on a number of philosophical issues, such as the advantages of multiple fellows, the need for core knowledge and skill sets, and the need to maintain clinical skills during informatics training. However, there were other

  15. The Identification and Description of Exemplary Bilingual Education Programs.

    ERIC Educational Resources Information Center

    Campeau, Peggie L.; And Others

    This is the final report of one of three studies in an overall project entitled "Evaluation of Bilingual Education Programs." The objectives of this study were to: (1) identify and recommend as exemplary up to 10 bilingual education programs for submission to the Dissemination Review Panel (DRP) of the Education Division, DHEW, and (2) develop…

  16. World Perspective Case Descriptions on Educational Programs for Adults: Finland.

    ERIC Educational Resources Information Center

    Virtala, Mirja; And Others

    This document contains eight case studies of the following adult education programs in Finland: (1) an experiment combining classroom teaching and distance education and one that studied the effects of offering art courses at different levels in 1982-1985 (Virtala); (2) cooperative programs since 1981 between municipal and city levels in Mikkeli…

  17. The Yale Child Welfare Research Program: Description and Results.

    ERIC Educational Resources Information Center

    Rescorla, Leslie A.; And Others

    The Yale Child Welfare Research Program was a comprehensive, service centered, longitudinal, intervention project for low-income families and their children. Eighteen children from inner city, low-income, predominantly black families participated in the intervention program from before birth to 30 months of age. Each family was assigned a team of…

  18. Graduate Degree Programs in Speech Communication: Description and Assessment

    ERIC Educational Resources Information Center

    LaBan, Frank K.

    1977-01-01

    Contends that the current status of job opportunities in speech versus the number of graduate degrees awarded on a regular basis warrant a moratorium on new graduate M.A. and Ph.D. programs and a reduction in graduate admissions to existing programs. Available from: ACA Bulletin, Robert Hall, Editor, Speech Communication Association, 5205 Leesburg…

  19. Morning Report in Family Medicine Residency Programs: A Descriptive Study.

    ERIC Educational Resources Information Center

    Kuncharapu, Indumathi; Cass, Alvah R.; Carlson, Carol A.; Scott, Jack R.

    Morning Report (MR) is a frequently held case conference in most Family Medicine (FM) residency programs among medical learners who discuss recent inpatient admissions before the day's care of patients. This study conducted a national survey of FM residency program directors to describe the roles of faculty and residents in facilitating MR.…

  20. World Perspective Case Descriptions on Educational Programs for Adults: Italy.

    ERIC Educational Resources Information Center

    Federighi, Paolo; And Others

    Nine adult education programs being conducted in Italy are described in the case studies in this packet. The courses range from adult basic education to continuing education courses in languages and management. Most are described in connection with the area of the country in which they are offered. The following programs are profiled: (1) public…

  1. Corporate Human Resources Adult Training and Employment Program Description.

    ERIC Educational Resources Information Center

    Aetna Life and Casualty, Hartford, CT.

    In response to increasing difficulty in finding qualified candidates for entry-level positions, the Aetna company has developed an Adult Training and Employment program. This program (1) trains, hires, and retains nontraditional candidates from the area's public and private agencies; (2) focuses on issues that affect this population's ability to…

  2. Alternative Schools and Programs: Five Descriptions. Technical Assistance Bulletin 37.

    ERIC Educational Resources Information Center

    National School Resource Network, Washington, DC.

    During the past ten years, many school districts have established alternative schools or programs for students who are seriously disruptive and academically unsuccessful. This bulletin describes five different types of alternative programs that have been effective in dealing with disruptive youth. They include the Tri-C Community Centered…

  3. Toward a descriptive model of solar particles in the heliosphere

    NASA Technical Reports Server (NTRS)

    Shea, M. A.; Smart, D. F.; Adams, James H., Jr.; Chenette, D.; Feynman, Joan; Hamilton, Douglas C.; Heckman, G. R.; Konradi, A.; Lee, Martin A.; Nachtwey, D. S.

    1988-01-01

    During a workshop on the interplanetary charged particle environment held in 1987, a descriptive model of solar particles in the heliosphere was assembled. This model includes the fluence, composition, energy spectra, and spatial and temporal variations of solar particles both within and beyong 1 AU. The ability to predict solar particle fluences was also discussed. Suggestions for specific studies designed to improve the basic model were also made.

  4. World Perspective Case Descriptions on Educational Programs for Adults: U.S.A.

    ERIC Educational Resources Information Center

    Knox, Alan B.; And Others

    These 13 case descriptions of adult education programs in the United States are part of a set that reflects a cooperative effort by adult educators to increase international understanding of various educational programs for adults in their societal context. A face sheet for each program provides this information: name, organization, and address of…

  5. Geological formation - drill string dynamic interaction finite-element program (GEODYN). Phase 1. Theoretical description

    SciTech Connect

    Baird, J.A.; Apostal, M.C.; Rotelli, R.L. Jr.; Tinianow, M.A.; Wormley, D.N.

    1984-06-01

    The Theoretical Description for the GEODYN interactive finite-element computer program is presented. The program is capable of performing the analysis of the three-dimensional transient dynamic response of a Polycrystalline Diamond Compact Bit-Bit Sub arising from the intermittent contact of the bit with the downhole rock formations. The program accommodates nonlinear, time-dependent, loading and boundary conditions.

  6. Descriptive Video Service (DVS) Makes Television Programming and Video Available to Blind and Visually Impaired Viewers.

    ERIC Educational Resources Information Center

    McNulty, Tom, Ed.

    1996-01-01

    Describes descriptive video service (DVS) which makes television programming and videos accessible to blind and visually impaired viewers. Topics include the development of DVS at the WGBH public broadcasting network in Boston, narrative descriptions of key visual elements, and access to World Wide Web sites. (LRW)

  7. 7 CFR 4290.10 - Description of the Rural Business Investment Company Program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL BUSINESS INVESTMENT COMPANY (âRBICâ) PROGRAM Introduction to Part 4290 § 4290.10 Description of the Rural Business... 7 Agriculture 15 2010-01-01 2010-01-01 false Description of the Rural Business Investment...

  8. 78 FR 40421 - Inquiry Regarding Video Description in Video Programming Distributed on Television and on the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-05

    ...In this document, the Federal Communications Commission (Commission) solicits public comment on issues related to video description in video programming that is delivered via both television and the Internet. The comments received in response to these inquiries will inform a report to Congress required by the CVAA on the status, benefits, and costs of video description on television and......

  9. Description of the programs and facilities of the Physics Division

    SciTech Connect

    Not Available

    1992-10-01

    The major emphasis of our experimental nuclear physics research is in Heavy-Ion Physics, centered at the recently completed ATLAS facility. ATLAS is a designated National User Facility and is based on superconducting radio-frequency technology developed in the Physics Division. In addition, the Division has strong programs in Medium-Energy Physics and in Weak-Interaction Physics as well as in accelerator development. Our nuclear theory research spans a wide range of interests including nuclear dynamics with subnucleonic degrees of freedom, dynamics of many-nucleon systems, nuclear structure, and heavy-ion interactions. This research makes contact with experimental research programs in intermediate-energy and heavy-ion physics, both within the Division and on the national scale. The Atomic Physics program, the largest of which is accelerator-based, primarily uses ATLAS, a 5-MV Dynamitron accelerator and a highly stable 150-kV accelerator. A synchrotron-based atomic physics program has recently been initiated with current research with the National Synchrotron Light Source in preparation for a program at the Advanced Photon Source, at Argonne. The principal interests of the Atomic Physics program are in the interactions of fast atomic and molecular ions with solids and gases and in the laser spectroscopy of exotic species. The program is currently being expanded to take advantage of the unique research opportunities in synchrotron-based research that will present themselves when the Advanced Photon Source comes on line at Argonne. These topics are discussed briefly in this report.

  10. Advanced crew procedures development techniques: Procedures and performance program description

    NASA Technical Reports Server (NTRS)

    Arbet, J. D.; Mangiaracina, A. A.

    1975-01-01

    The Procedures and Performance Program (PPP) for operation in conjunction with the Shuttle Procedures Simulator (SPS) is described. The PPP user interface, the SPS/PPP interface, and the PPP applications software are discussed.

  11. LACIE performance predictor final operational capability program description, volume 2

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Given the swath table files, the segment set for one country and cloud cover data, the SAGE program determines how many times and under what conditions each segment is accessed by satellites. The program writes a record for each segment on a data file which contains the pertinent acquisition data. The weather data file can also be generated from a NASA supplied tape. The Segment Acquisition Selector Program (SACS) selects data from the segment reference file based upon data input manually and from a crop window file. It writes the extracted data to a data acquisition file and prints two summary reports. The POUT program reads from associated LACIE files and produces printed reports. The major types of reports that can be produced are: (1) Substrate Reference Data Reports, (2) Population Mean, Standard Deviation and Histogram Reports, (3) Histograms of Monte Carlo Statistics Reports, and (4) Frequency of Sample Segment Acquisitions Reports.

  12. LACIE performance predictor final operational capability program description, volume 1

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The program EPHEMS computes the orbital parameters for up to two vehicles orbiting the earth for up to 549 days. The data represents a continuous swath about the earth, producing tables which can be used to determine when and if certain land segments will be covered. The program GRID processes NASA's climatology tape to obtain the weather indices along with associated latitudes and longitudes. The program LUMP takes substrata historical data and sample segment ID, crop window, crop window error and statistical data, checks for valid input parameters and generates the segment ID file, crop window file and the substrata historical file. Finally, the System Error Executive (SEE) Program checks YES error and truth data, CAMS error data, and signature extension data for validity and missing elements. A message is printed for each error found.

  13. The FORTRAN static source code analyzer program (SAP) system description

    NASA Technical Reports Server (NTRS)

    Decker, W.; Taylor, W.; Merwarth, P.; Oneill, M.; Goorevich, C.; Waligora, S.

    1982-01-01

    A source code analyzer program (SAP) designed to assist personnel in conducting studies of FORTRAN programs is described. The SAP scans FORTRAN source code and produces reports that present statistics and measures of statements and structures that make up a module. The processing performed by SAP and of the routines, COMMON blocks, and files used by SAP are described. The system generation procedure for SAP is also presented.

  14. Attracting and Retaining Adult Learners (ARAL). A Compilation of Selected Program Descriptions Taken from the 1980 ARAL Survey.

    ERIC Educational Resources Information Center

    American Coll. Testing Program, Iowa City, IA. National Center for the Advancement of Educational Practices.

    A catalog of 205 descriptions of college programs to recruit and retain adult learners is presented, based on a national survey, "Attracting and Retaining Adult Learners" (ARAL), conducted in 1980 by the American College Testing Program. In addition to a brief program description, each program form provides information on the type of program, the…

  15. Mound ambient air surveillance program: Description and path forward

    SciTech Connect

    Bauer, L R

    1992-08-01

    The ambient air monitoring program in place at Mound has undergone a number of changes since its installation. These changes have resulted from revisions to prevailing environmental regulations and guidance. Additional voluntary upgrades and modifications are planned. This report serves to update information on sampling station locations, equipment designs, operational criteria, and planned upgrades.

  16. Coca-Cola Hispanic Education Fund: Los Angeles Program Description.

    ERIC Educational Resources Information Center

    Coca Cola Bottling Co. of Los Angeles, CA.

    The Coca-Cola Hispanic Education Fund was created in response to the high school dropout problem in Los Angeles. The Fund enables the Coca-Cola Bottling Company of Los Angeles to build upon the successful relationship it has developed in the Hispanic community and maximizes the effectiveness of existing student support programs by directing needy…

  17. Integrating Computers with Video Cassette Recorders. Program Description.

    ERIC Educational Resources Information Center

    Anderson, Glenn

    This report describes a project undertaken with students in grades 5 through 7 in the Toms River (New Jersey) Regional School District to develop a technique for integrating microcomputers and VCRs (videocassette recorders). Following an overview of the program, a brief review of research on technology in the classroom is presented along with a…

  18. 44 CFR 360.2 - Description of program.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Workshops on Disaster Recovery or Hazard Mitigation. (2) Government and recipient conducted courses... application, to be accompanied by a Training and Education (T&E) plan for a total of three years, only the... in terms of ongoing training objectives and programs. In the first year plan applicants...

  19. 44 CFR 360.2 - Description of program.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Workshops on Disaster Recovery or Hazard Mitigation. (2) Government and recipient conducted courses... application, to be accompanied by a Training and Education (T&E) plan for a total of three years, only the... in terms of ongoing training objectives and programs. In the first year plan applicants...

  20. World Perspective Case Descriptions on Educational Programs for Adults: Australia.

    ERIC Educational Resources Information Center

    O'Neill, Barry; And Others

    This document contains 24 case studies of adult education in Australia: (1) N.S.W. (New South Wales) Department of Agriculture Home Study Program (O'Neill); (2) Increasing Citizen Participation in Local Government (Holderness-Roddam); (3) School for Seniors (Benham and Vickers); (4) Community Living Project (Bleechmore); (5) Learning for the Less…

  1. Media Literacy Education Program Evaluators: What's the Job Description, Again?

    ERIC Educational Resources Information Center

    DaCosta, Kneia Octavia

    2012-01-01

    School program evaluation researchers face a set of overlapping questions concerning our roles in the field: For the sake of "the data" and in quest of "the truth," am I a shrewd researcher before all else? For the sake of community-building and establishing respectful, reciprocal relationships with my school partners, am I first a gracious school…

  2. A Description of the Hawthorn Center Early Intervention Program.

    ERIC Educational Resources Information Center

    Glovinsky, Ira; Keller, Jackie

    An early intervention project for preschool handicapped children is described. Specific program goals (including improved functioning in social, emotional, communication, and preacademic areas) are listed, and roles of the interdisciplinary staff members are considered. Among evaluation approaches discussed are psychological measures, family…

  3. Description and Evaluation of Training Program for Visiting Homemakers.

    ERIC Educational Resources Information Center

    Faulkner, Rosemary

    Prince Edward Island NewStart tested the efficiency of an organized visiting homemaker service project involving the preparation of nine mature, unemployed or underemployed women to meet crisis situations, especially in disadvantaged homes. The 12 week training program was divided into five units--home nursing (47 hours), home economics (62…

  4. Description and Evaluation of the 1980 Summer Scholars Program.

    ERIC Educational Resources Information Center

    Mares, Kenneth R.; And Others

    The University of Missouri, under a contract with the Health Resources Administration, has planned and developed an Area Health Education Center (AHEC), whose purpose is to address the problem of underrepresentation of minority and educationally disadvantaged students in educational programs for health professions. Activities range from early…

  5. PROGRAM DESCRIPTION, SANTA BARBARA CITY SCHOOLS SPECIAL EDUCATION DEPARTMENT.

    ERIC Educational Resources Information Center

    MURPHY, THOMAS J.; AND OTHERS

    SINCE ITS BEGINNING IN 1928, THE PROGRAM HAS EXPANDED TO BECOME A DEPARTMENT (1953), AND IN 1964, THE DEPARTMENT PROCESSED 1,500 CASES. SERVICES ARE PROVIDED FOR CHILDREN WHO ARE PHYSICALLY HANDICAPPED, EDUCABLE MENTALLY HANDICAPPED, TRAINABLE MENTALLY HANDICAPPED, CONFINED TO HOME OR HOSPITAL, VISUALLY HANDICAPPED, SPEECH HANDICAPPED,…

  6. User's guide and description of the streamline divergence computer program. [turbulent convective heat transfer

    NASA Technical Reports Server (NTRS)

    Sulyma, P. R.; Mcanally, J. V.

    1975-01-01

    The streamline divergence program was developed to demonstrate the capability to trace inviscid surface streamlines and to calculate outflow-corrected laminar and turbulent convective heating rates on surfaces subjected to exhaust plume impingement. The analytical techniques used in formulating this program are discussed. A brief description of the streamline divergence program is given along with a user's guide. The program input and output for a sample case are also presented.

  7. Quality Assurance Program description, Defense Waste Processing Facility (DWPF)

    SciTech Connect

    Maslar, S.R.

    1992-11-02

    This document describes the Westinghouse Savannah River Company's (WSRC) Quality Assurance Program for Defense Waste Processing at the Savannah River Site (SRS). WSRC is the operating contractor for the US Department of Energy (DOE) at the SRS. The following objectives are achieved through developing and implementing the Quality Assurance Program: (1) Ensure that the attainment of quality (in accomplishing defense high-level waste processing objectives at the SRS) is at a level commensurate with the government's responsibility for protecting public health and safety, the environment, the public investment, and for efficiently and effectively using national resources. (2) Ensure that high-level waste from qualification and production activities conform to requirements defined by OCRWM. These activities include production processes, equipment, and services; and products that are planned, designed, procured, fabricated, installed, tested, operated, maintained, modified, or produced.

  8. Office of radiation and indoor air: Program description

    SciTech Connect

    Not Available

    1993-06-01

    The goal of the Environmental Protection Agency`s (EPA) Office of Radiation and Indoor Air is to protect the public and the environment from exposures to radiation and indoor air pollutants. The Office develops protection criteria, standards, and policies and works with other programs within EPA and other agencies to control radiation and indoor air pollution exposures; provides technical assistance to states through EPA`s regional offices and other agencies having radiation and indoor air protection programs; directs an environmental radiation monitoring program; responds to radiological emergencies; and evaluates and assesses the overall risk and impact of radiation and indoor air pollution. The Office is EPA`s lead office for intra- and interagency activities coordinated through the Committee for Indoor Air Quality. It coordinates with and assists the Office of Enforcement in enforcement activities where EPA has jurisdiction. The Office disseminates information and works with state and local governments, industry and professional groups, and citizens to promote actions to reduce exposures to harmful levels of radiation and indoor air pollutants.

  9. 41 CFR 101-29.221 - Federal Specifications, Standards and Commercial Item Description Program (Federal...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 2 2013-07-01 2012-07-01 true Federal Specifications, Standards and Commercial Item Description Program (Federal Standardization Program). 101-29.221 Section 101-29.221 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS...

  10. 41 CFR 101-29.221 - Federal Specifications, Standards and Commercial Item Description Program (Federal...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Federal Specifications, Standards and Commercial Item Description Program (Federal Standardization Program). 101-29.221 Section 101-29.221 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS...

  11. 41 CFR 101-29.221 - Federal Specifications, Standards and Commercial Item Description Program (Federal...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 41 Public Contracts and Property Management 2 2014-07-01 2012-07-01 true Federal Specifications, Standards and Commercial Item Description Program (Federal Standardization Program). 101-29.221 Section 101-29.221 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS...

  12. 41 CFR 101-29.221 - Federal Specifications, Standards and Commercial Item Description Program (Federal...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 41 Public Contracts and Property Management 2 2011-07-01 2007-07-01 true Federal Specifications, Standards and Commercial Item Description Program (Federal Standardization Program). 101-29.221 Section 101-29.221 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS...

  13. 41 CFR 101-29.221 - Federal Specifications, Standards and Commercial Item Description Program (Federal...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 2 2012-07-01 2012-07-01 false Federal Specifications, Standards and Commercial Item Description Program (Federal Standardization Program). 101-29.221 Section 101-29.221 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS...

  14. Characteristics of PETE Doctoral Level Institutions: Descriptions of Programs, Faculty and Doctoral Students

    ERIC Educational Resources Information Center

    Boyce, B. Ann; Rikard, G. Linda

    2011-01-01

    The present study of Doctoral PETE programs provided an extensive description of demographic data which included: (a) doctoral program characteristics, (b) faculty, and (c) doctoral graduates. Several data sets from the academic years of 2005-06 and 2008-09 as well as selected summary data from 1996-97 through 2008-09 were used to make comparisons…

  15. Leadership Styles at Middle- and Early-College Programs: A Quantitative Descriptive Correlational Study

    ERIC Educational Resources Information Center

    Berksteiner, Earl J.

    2013-01-01

    The purpose of this quantitative descriptive correlational study was to determine if associations existed between middle- and early-college (MEC) principals' leadership styles, teacher motivation, and teacher satisfaction. MEC programs were programs designed to assist high school students who were not served well in a traditional setting (Middle…

  16. Hanford surplus facilities programs facilities listings and descriptions. Revision 1

    SciTech Connect

    Kiser, S.K.; Witt, T.L.

    1994-01-01

    On the Hanford Site, many surplus facilities exist (including buildings, stacks, tanks, cribs, burial grounds, and septic systems) that are scheduled to be decommissioned. Many of these facilities contain large inventories of radionuclides, which present potential radiological hazards on and off the Hanford Site. Some structures with limited structural deterioration present potential radiological and industrial safety hazards to personnel. Because of the condition of these facilities, a systematic surveillance and maintenance program is performed to identify and correct potential hazards to personnel and the environment until eventual decommissioning operations are completed.

  17. Description of the Formerly Utilized Sites Remedial Action Program

    SciTech Connect

    Not Available

    1980-09-01

    The background and the results to date of the Department of Energy program to identify and evaluate the radiological conditions at sites formerly utilized by the Corps of Engineers' Manhattan Engineer District (MED) and the US Atomic Energy Commission (AEC) are summarized. The sites of concern were federally, privately, and institutionally owned and were used primarily for research, processing, and storage of uranium and thorium ores, concentrates, or residues. Some sites were subsequently released for other purposes without radiological restriction. Surveys have been conducted since 1974 to document radiological conditions at such sites. Based on radiological surveys, sites are identified in this document that require, or are projected to require, remedial action to remove potential restrictions on the use of the property due to the presence of residual low-level radioactive contamination. Specific recommendations for each site will result from more detailed environmental and engineering surveys to be conducted at those sites and, if necessary, an environmental impact assessment or environmental impact statement will be prepared. Section 3.0 describes the current standards and guidelines now being used to conduct remedial actions. Current authority of the US Department of Energy (DOE) to proceed with remedial actions and the new authority required are summarized. A plan to implement the Formerly Utilized Sites Remedial Action Program (FUSRAP) in accordance with the new authority is presented, including the objectives, scope, general approach, and a summary schedule. Key issues affecting schedule and cost are discussed.

  18. Model Program Evaluations. Fact Sheet

    ERIC Educational Resources Information Center

    Arkansas Safe Schools Initiative Division, 2002

    2002-01-01

    There are probably thousands of programs and courses intended to prevent or reduce violence in this nation's schools. Evaluating these many programs has become a problem or goal in itself. There are now many evaluation programs, with many levels of designations, such as model, promising, best practice, exemplary and noteworthy. "Model program" is…

  19. Documentation for Grants Equal to Tax model: Volume 1, Technical description

    SciTech Connect

    Not Available

    1986-01-01

    A computerized model, the Grants Equal to Tax (GETT) model, was developed to assist in evaluating the amount of federal grant monies that would go to state and local jurisdictions under the provisions outlined in the Nuclear Waste Policy Act of 1982. The GETT model is capable of forecasting the amount of tax liability associated with all property owned and all activities undertaken by the US Department of Energy (DOE) in site characterization and repository development. The GETT program is a user-friendly, menu-driven model developed using dBASE III/trademark/, a relational data base management system. The data base for GETT consists primarily of eight separate dBASE III/trademark/ files corresponding to each of the eight taxes levied by state and local jurisdictions on business property and activity. Additional smaller files help to control model inputs and reporting options. Volume 1 of the GETT model documentation is a technical description of the program and its capabilities providing (1) descriptions of the data management system and its procedures; (2) formulas for calculating taxes (illustrated with flow charts); (3) descriptions of tax data base variables for the Deaf Smith County, Texas, Richton Dome, Mississippi, and Davis Canyon, Utah, salt sites; and (4) data inputs for the GETT model. 10 refs., 18 figs., 3 tabs.

  20. The Plasma Interaction Experiment (PIX) description and test program. [electrometers

    NASA Technical Reports Server (NTRS)

    Ignaczak, L. R.; Haley, F. A.; Domino, E. J.; Culp, D. H.; Shaker, F. J.

    1978-01-01

    The plasma interaction experiment (PIX) is a battery powered preprogrammed auxiliary payload on the LANDSAT-C launch. This experiment is part of a larger program to investigate space plasma interactions with spacecraft surfaces and components. The varying plasma densities encountered during available telemetry coverage periods are deemed sufficient to determine first order interactions between the space plasma environment and the biased experimental surfaces. The specific objectives of the PIX flight experiment are to measure the plasma coupling current and the negative voltage breakdown characteristics of a solar array segment and a gold plated steel disk. Measurements will be made over a range of surface voltages up to plus or minus kilovolt. The orbital environment will provide a range of plasma densities. The experimental surfaces will be voltage biased in a preprogrammed step sequence to optimize the data returned for each plasma region and for the available telemetry coverage.

  1. The North American Mercury Model Intercomparison Study (NAMMIS). Study Description and Model-to-Model Comparison

    EPA Science Inventory

    This manuscript provides a description of the North American Mercury Model Intercomparison Study (NAMMIS) and results obtained from that study. The NAMMIS was conducted by EPA/NERL and involved a number of public and private research organizations developing numerical models of ...

  2. HZETRN: Description of a free-space ion and nucleon transport and shielding computer program

    NASA Technical Reports Server (NTRS)

    Wilson, John W.; Badavi, Francis F.; Cucinotta, Francis A.; Shinn, Judy L.; Badhwar, Gautam D.; Silberberg, R.; Tsao, C. H.; Townsend, Lawrence W.; Tripathi, Ram K.

    1995-01-01

    The high-charge-and energy (HZE) transport computer program HZETRN is developed to address the problems of free-space radiation transport and shielding. The HZETRN program is intended specifically for the design engineer who is interested in obtaining fast and accurate dosimetric information for the design and construction of space modules and devices. The program is based on a one-dimensional space-marching formulation of the Boltzmann transport equation with a straight-ahead approximation. The effect of the long-range Coulomb force and electron interaction is treated as a continuous slowing-down process. Atomic (electronic) stopping power coefficients with energies above a few A MeV are calculated by using Bethe's theory including Bragg's rule, Ziegler's shell corrections, and effective charge. Nuclear absorption cross sections are obtained from fits to quantum calculations and total cross sections are obtained with a Ramsauer formalism. Nuclear fragmentation cross sections are calculated with a semiempirical abrasion-ablation fragmentation model. The relation of the final computer code to the Boltzmann equation is discussed in the context of simplifying assumptions. A detailed description of the flow of the computer code, input requirements, sample output, and compatibility requirements for non-VAX platforms are provided.

  3. HZETRN: Description of a free-space ion and nucleon transport and shielding computer program

    NASA Astrophysics Data System (ADS)

    Wilson, John W.; Badavi, Francis F.; Cucinotta, Francis A.; Shinn, Judy L.; Badhwar, Gautam D.; Silberberg, R.; Tsao, C. H.; Townsend, Lawrence W.; Tripathi, Ram K.

    1995-05-01

    The high-charge-and energy (HZE) transport computer program HZETRN is developed to address the problems of free-space radiation transport and shielding. The HZETRN program is intended specifically for the design engineer who is interested in obtaining fast and accurate dosimetric information for the design and construction of space modules and devices. The program is based on a one-dimensional space-marching formulation of the Boltzmann transport equation with a straight-ahead approximation. The effect of the long-range Coulomb force and electron interaction is treated as a continuous slowing-down process. Atomic (electronic) stopping power coefficients with energies above a few A MeV are calculated by using Bethe's theory including Bragg's rule, Ziegler's shell corrections, and effective charge. Nuclear absorption cross sections are obtained from fits to quantum calculations and total cross sections are obtained with a Ramsauer formalism. Nuclear fragmentation cross sections are calculated with a semiempirical abrasion-ablation fragmentation model. The relation of the final computer code to the Boltzmann equation is discussed in the context of simplifying assumptions. A detailed description of the flow of the computer code, input requirements, sample output, and compatibility requirements for non-VAX platforms are provided.

  4. Geothermal loan guaranty cash flow model: description and users' manual

    SciTech Connect

    Keimig, M.A.; Rosenberg, J.I.; Entingh, D.J.

    1980-11-01

    This is the users guide for the Geothermal Loan Guaranty Cash Flow Model (GCFM). GCFM is a Fortran code which designs and costs geothermal fields and electric power plants. It contains a financial analysis module which performs life cycle costing analysis taking into account various types of taxes, costs and financial structures. The financial module includes a discounted cash flow feature which calculates a levelized breakeven price for each run. The user's guide contains descriptions of the data requirements and instructions for using the model.

  5. Quality assurance program description: Hanford Waste Vitrification Plant, Part 1. Revision 3

    SciTech Connect

    Not Available

    1992-12-31

    This document describes the Department of Energy`s Richland Field Office (DOE-RL) quality assurance (QA) program for the processing of high-level waste as well as the Vitrification Project Quality Assurance Program for the design and construction of the Hanford Waste Vitrification Plant (HWVP). It also identifies and describes the planned activities that constitute the required quality assurance program for the HWVP. This program applies to the broad scope of quality-affecting activities associated with the overall HWVP Facility. Quality-affecting activities include designing, purchasing, fabricating, handling, shipping, storing, cleaning, erecting, installing, inspecting, testing, maintaining, repairing, and modifying. Also included are the development, qualification, and production of waste forms which may be safely used to dispose of high-level radioactive waste resulting from national defense activities. The HWVP QA program is made up of many constituent programs that are being implemented by the participating organizations. This Quality Assurance program description is intended to outline and define the scope and application of the major programs that make up the HWVP QA program. It provides a means by which the overall program can be managed and directed to achieve its objectives. Subsequent parts of this description will identify the program`s objectives, its scope, application, and structure.

  6. REGIONAL PARTICULATE MODEL - 1. MODEL DESCRIPTION AND PRELIMINARY RESULTS

    EPA Science Inventory

    The gas-phase chemistry and transport mechanisms of the Regional Acid Deposition Model have been modified to create the Regional Particulate Model, a three-dimensional Eulerian model that simulates the chemistry, transport, and dynamics of sulfuric acid aerosol resulting from pri...

  7. CDMBE: A Case Description Model Based on Evidence

    PubMed Central

    Zhu, Jianlin; Yang, Xiaoping; Zhou, Jing

    2015-01-01

    By combining the advantages of argument map and Bayesian network, a case description model based on evidence (CDMBE), which is suitable to continental law system, is proposed to describe the criminal cases. The logic of the model adopts the credibility logical reason and gets evidence-based reasoning quantitatively based on evidences. In order to consist with practical inference rules, five types of relationship and a set of rules are defined to calculate the credibility of assumptions based on the credibility and supportability of the related evidences. Experiments show that the model can get users' ideas into a figure and the results calculated from CDMBE are in line with those from Bayesian model. PMID:26421006

  8. CDMBE: A Case Description Model Based on Evidence.

    PubMed

    Zhu, Jianlin; Yang, Xiaoping; Zhou, Jing

    2015-01-01

    By combining the advantages of argument map and Bayesian network, a case description model based on evidence (CDMBE), which is suitable to continental law system, is proposed to describe the criminal cases. The logic of the model adopts the credibility logical reason and gets evidence-based reasoning quantitatively based on evidences. In order to consist with practical inference rules, five types of relationship and a set of rules are defined to calculate the credibility of assumptions based on the credibility and supportability of the related evidences. Experiments show that the model can get users' ideas into a figure and the results calculated from CDMBE are in line with those from Bayesian model. PMID:26421006

  9. Site descriptive modeling as a part of site characterization in Sweden - Concluding the surface based investigations

    SciTech Connect

    Andersson, Johan; Winberg, Anders; Skagius, Kristina; Stroem, Anders; Lindborg, Tobias

    2007-07-01

    The Swedish Nuclear Fuel and Waste Management Co., SKB, is currently finalizing its surface based site investigations for the final repository for spent nuclear fuel in the municipalities of Oestharmnar (the Forsmark area) and Oskarshamn (the Simpevar/Laxemar area). The investigation data are assessed into a Site Descriptive Model, constituting a synthesis of geology, rock mechanics, thermal properties, hydrogeology, hydro-geochemistry, transport properties and a surface system description. Site data constitute a wide range of different measurement results. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modeling. The three-dimensional modeling (i.e. estimating the distribution of parameter values in space) is made in a sequence where the geometrical framework is taken from the geological models and in turn used by the rock mechanics, thermal and hydrogeological modeling. These disciplines in turn are partly interrelated, and also provide feedback to the geological modeling, especially if the geological description appears unreasonable when assessed together with the other data. Procedures for assessing the uncertainties and the confidence in the modeling have been developed during the course of the site modeling. These assessments also provide key input to the completion of the site investigation program. (authors)

  10. Description of a tilt wing mathematical model for piloted simulation

    NASA Technical Reports Server (NTRS)

    Totah, Joseph J.

    1991-01-01

    A tilt-wing mathematical model that was used in a piloted six-deg-of-freedom flight simulation application is presented. Two types of control systems developed for the model - a conventional programmed-flap wing-tilt control system and a geared-flap wing-tilt control system - are discussed. The objective of this effort was to develop the capability to study tilt-wing aircraft. Experienced tilt-wing pilots subjectively evaluated the model using programmed-flap control to assess the quality of the simulation. The objective was met and the model was then applied to study geared-flap control to investigate the possibility of eliminating the need for auxiliary pitch control devices. This was performed in the moving-base simulation environment, and the vehicle responses with programmed-flap and geared-flap control were compared.

  11. Unified description of structure and reactions: implementing the nuclear field theory program

    NASA Astrophysics Data System (ADS)

    Broglia, R. A.; Bortignon, P. F.; Barranco, F.; Vigezzi, E.; Idini, A.; Potel, G.

    2016-06-01

    The modern theory of the atomic nucleus results from the merging of the liquid drop model of Niels Bohr and Fritz Kalckar, and of the shell model of Marie Goeppert Meyer and Hans Jensen. The first model contributed the concepts of collective excitations. The second, those of independent-particle motion. The unification of these apparently contradictory views in terms of the particle-vibration and particle-rotation couplings carried out by Aage Bohr and Ben Mottelson has allowed for an ever more complete, accurate and detailed description of nuclear structure. Nuclear field theory (NFT), developed by the Copenhagen–Buenos Aires collaboration, provided a powerful quantal embodiment of this unification. Reactions are not only at the basis of quantum mechanics (statistical interpretation, Max Born), but also the specific tools to probe the atomic nucleus. It is then natural that NFT is being extended to deal with processes which involve the continuum in an intrinsic fashion, so as to be able to treat them on an equal footing with those associated with bound states (structure). As a result, spectroscopic studies of transfer to continuum states could eventually make use of the NFT rules, properly extended to take care of recoil effects. In the present contribution we review the implementation of the NFT program of structure and reactions, setting special emphasis on open problems and outstanding predictions.

  12. Coarse-grained description of cosmic structure from Szekeres models

    NASA Astrophysics Data System (ADS)

    Sussman, Roberto A.; Delgado Gaspar, I.; Hidalgo, Juan Carlos

    2016-03-01

    We show that the full dynamical freedom of the well known Szekeres models allows for the description of elaborated 3-dimensional networks of cold dark matter structures (over-densities and/or density voids) undergoing ``pancake'' collapse. By reducing Einstein's field equations to a set of evolution equations, which themselves reduce in the linear limit to evolution equations for linear perturbations, we determine the dynamics of such structures, with the spatial comoving location of each structure uniquely specified by standard early Universe initial conditions. By means of a representative example we examine in detail the density contrast, the Hubble flow and peculiar velocities of structures that evolved, from linear initial data at the last scattering surface, to fully non-linear 10-20 Mpc scale configurations today. To motivate further research, we provide a qualitative discussion on the connection of Szekeres models with linear perturbations and the pancake collapse of the Zeldovich approximation. This type of structure modelling provides a coarse grained—but fully relativistic non-linear and non-perturbative —description of evolving large scale cosmic structures before their virialisation, and as such it has an enormous potential for applications in cosmological research.

  13. The natural emissions model (NEMO): Description, application and model evaluation

    NASA Astrophysics Data System (ADS)

    Liora, Natalia; Markakis, Konstantinos; Poupkou, Anastasia; Giannaros, Theodore M.; Melas, Dimitrios

    2015-12-01

    The aim of this study is the application and evaluation of a new computer model used for the quantification of emissions coming from natural sources. The Natural Emissions Model (NEMO) is driven by the meteorological data of the mesoscale numerical Weather Research and Forecasting (WRF) model and it estimates particulate matter (PM) emissions from windblown dust, sea salt aerosols (SSA) and primary biological aerosol particles (PBAPs). It also includes emissions from Biogenic Volatile Organic Compounds (BVOCs) from vegetation; however, this study focuses only on particle emissions. An application and evaluation of NEMO at European scale are presented. NEMO and the modelling system consisted of WRF model and the Comprehensive Air Quality Model with extensions (CAMx) were applied in a 30 km European domain for the year 2009. The computed domain-wide annual PM10 emissions from windblown dust, sea salt and PBAPs were 0.57 Tg, 20 Tg and 0.12 Tg, respectively. PM2.5 represented 6% and 33% of emitted windblown dust and sea salt, respectively. Natural emissions are characterized by high geographical and seasonal variations; windblown dust emissions were the highest during summer in the southern Europe and SSA production was the highest in Atlantic Ocean during the cold season while in Mediterranean Sea the highest SSA emissions were found over the Aegean Sea during summer. Modelled concentrations were compared with surface station measurements and showed that the model captured fairly well the contribution of the natural sources to PM levels over Europe. Dust concentrations correlated better when dust transport events from Sahara desert were absent while the simulation of sea salt episodes led to an improvement of model performance during the cold season.

  14. A brief description of an Earth Resources Technology Satellite (ERTS) computer data analysis and management program

    NASA Technical Reports Server (NTRS)

    Jayroe, R. R., Jr.

    1973-01-01

    A data analysis and management procedure currently being used at Marshall Space Flight Center to analyze ERTS digital data is described. The objective is to acquaint potential users with the various computer programs that are available for analysis of multispectral digital imagery and to show how these programs are used in the overall data management plan. The report contains a brief description of each computer routine, and references are provided for obtaining more detailed information.

  15. Gamow shell model description of proton scattering on Ne18

    NASA Astrophysics Data System (ADS)

    Jaganathen, Y.; Michel, N.; Płoszajczak, M.

    2014-03-01

    Background: The structure of weakly bound/unbound nuclei close to particle drip lines is different from that around the valley of beta stability. A comprehensive description of these systems goes beyond the standard shell model (SM) and demands an open quantum system description of the nuclear many-body system. Purpose: For that purpose, we are using the Gamow shell model (GSM), which provides a fully microscopic description of bound and unbound nuclear states, nuclear decays, and reactions. We formulate the GSM in coupled-channel (GSM-CC) representation to describe low-energy elastic and inelastic scattering of protons on Ne18. Method: The GSM-CC formalism is applied to a translationally invariant Hamiltonian with an effective finite-range two-body interaction. We discuss in detail the GSM-CC formalism in coordinate space and give the description of the novel equivalent potential method for solving the GSM-CC system of integrodifferential equations. This method is then applied for the description of (p,p') reaction cross-sections. The reactions channels are built by GSM wave functions for the ground state 0+ and the first excited 2+ of Ne18 and a proton wave function expanded in different partial waves. The completeness of this basis is verified by comparing GSM and GSM-CC energies of low-energy resonant states in Na19. The differences between the two calculations provide a measure of the missing configurations in the GSM-CC calculation of low-energy states of Na19 due to the restriction on the number of excited states of Ne18. Results: We present the first application of the GSM-CC formalism for the calculation of excited states of Ne18 and Na19, the excitation function, and the elastic/inelastic differential cross-sections in the Ne18(p,p') reaction at different energies. This is the first unified description of the spectra and reaction cross-sections in the GSM formalism. The method is shown to be both feasible and accurate. The approximate equivalence of GSM

  16. Minnesota Department of Education Agricultural Education Program Descriptions 01.0000-01.9095

    ERIC Educational Resources Information Center

    Minnesota Department of Education, 2004

    2004-01-01

    This document provides a brief compilation of descriptions of agricultural education programs linked to Career and Technical Education (CTE) initiative in Minnesota. Agriculture Exploration courses focus on the animal sciences, plant sciences, natural resource sciences, agricultural business and marketing, and leadership development. Agribusiness…

  17. Mathematical description and program documentation for CLASSY, an adaptive maximum likelihood clustering method

    NASA Technical Reports Server (NTRS)

    Lennington, R. K.; Rassbach, M. E.

    1979-01-01

    Discussed in this report is the clustering algorithm CLASSY, including detailed descriptions of its general structure and mathematical background and of the various major subroutines. The report provides a development of the logic and equations used with specific reference to program variables. Some comments on timing and proposed optimization techniques are included.

  18. 77 FR 48102 - Closed Captioning and Video Description of Video Programming

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-13

    ... Commission adopted an Order, published at 76 FR 67376, November 1, 2011 and at 76 FR 67377, November 1, 2011... Rulemaking (the NPRM), published at 76 FR 67397, November 1, 2011, proposing to amend Sec. 79.1 of its rules... COMMISSION 47 CFR Part 79 Closed Captioning and Video Description of Video Programming AGENCY:...

  19. The effect of simplifying the building description on the numerical modeling of its thermal performance

    SciTech Connect

    Stetiu, C.

    1993-07-01

    A thermal building simulation program is a numerical model that calculates the response of the building envelopes to weather and human activity, simulates dynamic heating and cooling loads, and heating and cooling distribution systems, and models building equipment operation. The scope of the research is to supply the users of such programs with information about the dangers and benefits of simplifying the input to their models. The Introduction describes the advantages of modeling the heat transfer mechanisms in a building. The programs that perform this type of modeling have, however, limitations. The user is therefore often put in the situation of simplifying the floor plans of the building under study, but not being able to check the effects that this approximation introduces in the results of the simulation. Chapter 1 is a description of methods. It also introduces the floor plans for the office building under study and the ``reasonable`` floor plans simplifications. Chapter 2 presents DOE-2, the thermal building simulation program used in the sensitivity study. The evaluation of the accuracy of the DOE-2 program itself is also presented. Chapter 3 contains the sensitivity study. The complicated nature of the process of interpreting the temperature profile inside a space leads to the necessity of defining different building modes. The study compares the results from the model of the detailed building description with the results from the models of the same building having simplified floor plans. The conclusion is reached that a study of the effects of simplifying the floor plans of a building is important mainly for defining the cases in which this approximation is acceptable. Different results are obtained for different air conditioning/load regimes of the building. 9 refs., 24 figs.

  20. Career Oriented Education Management/Implementation Model. Model Description Package.

    ERIC Educational Resources Information Center

    Education Service Center Region 17, Lubbock, TX.

    The model described here is designed to serve as a method whereby a local school management/implementation team can implement career oriented education. It provides infusion strategies, materials, and staff development techniques through which The Education Service Center (ESC) staff trains and supports the Local Education Agency (LEA) team, which…

  1. SABRINA: an interactive solid geometry modeling program for Monte Carlo

    SciTech Connect

    West, J.T.

    1985-01-01

    SABRINA is a fully interactive three-dimensional geometry modeling program for MCNP. In SABRINA, a user interactively constructs either body geometry, or surface geometry models, and interactively debugs spatial descriptions for the resulting objects. This enhanced capability significantly reduces the effort in constructing and debugging complicated three-dimensional geometry models for Monte Carlo Analysis.

  2. A description of rotations for DEM models of particle systems

    NASA Astrophysics Data System (ADS)

    Campello, Eduardo M. B.

    2015-06-01

    In this work, we show how a vector parameterization of rotations can be adopted to describe the rotational motion of particles within the framework of the discrete element method (DEM). It is based on the use of a special rotation vector, called Rodrigues rotation vector, and accounts for finite rotations in a fully exact manner. The use of fictitious entities such as quaternions or complicated structures such as Euler angles is thereby circumvented. As an additional advantage, stick-slip friction models with inter-particle rolling motion are made possible in a consistent and elegant way. A few examples are provided to illustrate the applicability of the scheme. We believe that simple vector descriptions of rotations are very useful for DEM models of particle systems.

  3. Models of Teaching. Description of Teacher Inservice Education Materials.

    ERIC Educational Resources Information Center

    National Education Association, Washington, DC. Project on Utilization of Inservice Education R & D Outcomes.

    The teacher program described here provides a framework in which teachers may identify and understand their own theories and styles of teaching and may become familiar and competent with a variety of teaching strategies. The seven models studied are: concept formation, concept attainment, role playing, inquiry training. synectics, simulation, and…

  4. Description of a digital computer simulation of an Annular Momentum Control Device (AMCD) laboratory test model

    NASA Technical Reports Server (NTRS)

    Woolley, C. T.; Groom, N. J.

    1981-01-01

    A description of a digital computer simulation of an Annular Momentum Control Device (AMCD) laboratory model is presented. The AMCD is a momentum exchange device which is under development as an advanced control effector for spacecraft attitude control systems. The digital computer simulation of this device incorporates the following models: six degree of freedom rigid body dynamics; rim warp; controller dynamics; nonlinear distributed element axial bearings; as well as power driver and power supply current limits. An annotated FORTRAN IV source code listing of the computer program is included.

  5. ModMAP (Modular Multiple Alternatives Program). Program Description 1973-1974.

    ERIC Educational Resources Information Center

    Bridgeport Univ., CT. Coll. of Education.

    The Modular Multiple Alternatives Program (ModMaP), being developed at the University of Bridgeport, is the first competency-based, individualized graduate program in teacher education in the state of Connecticut. The program focuses on elementary teacher training and includes both master's and six-year level options. The program provides the…

  6. The diffusion of the distance Entomology Master's Degree Program at the University of Nebraska Lincoln: A descriptive case study

    NASA Astrophysics Data System (ADS)

    Hubbell, Jody M.

    This study explored three selected phases of Rogers' (1995) Diffusion of Innovations Theory to examine the diffusion process of the distance Entomology Master's Degree program at the University of Nebraska, Lincoln. A qualitative descriptive case study approach incorporated semi-structured interviews with individuals involved in one or more of the three stages: Development, Implementation, and Institutionalization. Documents and archival evidence were used to triangulate findings. This research analyzed descriptions of the program as it moved from the Development, to the Implementation, and finally, the Institutionalization stages of diffusion. Each respective stage was examined through open and axial coding. Process coding identified themes common to two or more diffusion stages, and explored the evolution of themes from one diffusion stage to the next. At a time of significant budget constraints, many departments were faced with the possibility of merger or dissolution. The Entomology Master's Degree Program evolved from being an entrepreneurial means to prevent departmental dissolution to eventually being viewed as a model for the development of similar programs across this university and other institutions of higher education. During this evolution, the program was reinvented to meet the broader needs of industry and a global student market. One finding not consistent with Rogers' model was that smaller, rather than larger, departmental size contributed to the success of the program. Within this small department, faculty members were able to share their experiences and knowledge with each other on a regular basis, which promoted greater acceptance of the distance program. How quality and rigor may be defined and measured was a key issue in each respective stage. In this specific case, quality and rigor was initially a comparison of on-campus and distance course content and then moved to program-based assessment and measures of student outcomes such as job

  7. Social Program Evaluation: Six Models.

    ERIC Educational Resources Information Center

    New Directions for Program Evaluation, 1980

    1980-01-01

    Representative models of program evaluation are described by their approach to values, and categorized by empirical style: positivism versus humanism. The models are: social process audit; experimental/quasi-experimental research design; goal-free evaluation; systems evaluation; cost-benefit analysis; and accountability program evaluation. (CP)

  8. Central United States Velocity Model Version 1: Description and Validation

    NASA Astrophysics Data System (ADS)

    Ramirez Guzman, L.; Williams, R. A.; Boyd, O. S.; Hartzell, S.

    2009-12-01

    We describe and test via numerical simulations a velocity model of the Central United States (CUSVM Version 1). Our model covers an area of 650,000 km2 and includes parts of Arkansas, Mississippi, Alabama, Illinois, Missouri, Kentucky and Tennessee. The model represents the compilation of research carried out for decades consisting of seismic refraction and reflection lines, geophysical logs, and inversions of the regional seismic properties. The CUSVM has a higher resolution description around Memphis and St. Louis, two of the largest urban areas in the Central United States. The density, p- and s-wave velocities are synthesized in a stand-alone spatial data base that can be queried to generate the required input for numerical simulations. We calibrate the CUSVM using three earthquakes located N, SW and SE of the zone encompassed by the model to sample different paths of propagation. The selected stations in the comparisons reflect different geological site conditions and cover distances ranging from 50 to 450 km away from the epicenters. The results indicate that both within and outside the Mississippi embayment, the CUSVM satisfactorily reproduces: a) the body wave arrival times and b) the observed regional variations in ground motion amplitude and duration in the frequency range 0-0.75Hz.

  9. Description of Exotic Nuclei with the Interacting Boson Model

    SciTech Connect

    Boeyuekata, M.; Van Isacker, P.; Uluer, I.

    2008-11-11

    Even--even nuclei in the A{approx}100 mass region are investigated within the framework of the interacting boson model-1 (IBM-1). The study includes energy spectra and electric quadrupole transition properties of zirconium, molybdenum, ruthenium and palladium isotopes with neutron number N{>=}54. A global parametrization of the IBM-1 hamiltonian is found leading to a description of 301 collective levels in 30 nuclei with a root-mean-square deviation from the observed level energies of 119 keV. The geometric character of the nuclei can be visualized by plotting the potential energy surface V({beta},{gamma}) obtained from the IBM-1 hamiltonian in the classical limit. The parametrization established on the basis of known elements is then used to predict properties of the unknown, neutron-rich isotopes {sup 106}Zr, {sup 112}Mo, {sup 116}Ru and {sup 120}Pd.

  10. Modeling a description logic vocabulary for cancer research.

    PubMed

    Hartel, Frank W; de Coronado, Sherri; Dionne, Robert; Fragoso, Gilberto; Golbeck, Jennifer

    2005-04-01

    The National Cancer Institute has developed the NCI Thesaurus, a biomedical vocabulary for cancer research, covering terminology across a wide range of cancer research domains. A major design goal of the NCI Thesaurus is to facilitate translational research. We describe: the features of Ontylog, a description logic used to build NCI Thesaurus; our methodology for enhancing the terminology through collaboration between ontologists and domain experts, and for addressing certain real world challenges arising in modeling the Thesaurus; and finally, we describe the conversion of NCI Thesaurus from Ontylog into Web Ontology Language Lite. Ontylog has proven well suited for constructing big biomedical vocabularies. We have capitalized on the Ontylog constructs Kind and Role in the collaboration process described in this paper to facilitate communication between ontologists and domain experts. The artifacts and processes developed by NCI for collaboration may be useful in other biomedical terminology development efforts. PMID:15797001

  11. On the Cluster-Model Description of Collisions

    NASA Astrophysics Data System (ADS)

    Baye, Daniel

    With simple cluster wave functions describing the colliding nuclei, the resonating-group method allows treating collisions realistically with full account of antisymmetrization and of good quantum numbers. The introduction of generator coordinates leads to a striking simplification by allowing the systematic use of Slater determinants. Reactions involving bound and scattering states simultaneously, such as radiative-capture reactions in nuclear astrophysics, are a particularly rich field of applications. In recent years, the microscopic cluster model has evolved to the study of three-body scattering which appears as a final state in a number of processes. The challenge is now to extend microscopic descriptions of collisions to ab initio calculations with realistic forces.

  12. Development of a weight/sizing design synthesis computer program. Volume 2: Program Description

    NASA Technical Reports Server (NTRS)

    Garrison, J. M.

    1973-01-01

    The program for the computerized analysis of weight estimation relationships for those elements of the space shuttle vehicle which contribute a significant portion of the inert weight is discussed. A listing of each module and subroutine of the program is presented. Included are a generalized flow chart describing the subroutine linkage of the complete program and detailed flow charts for each subprogram.

  13. A Descriptive Study on the Relationship between an Initial Physical Education Teacher Education Program and Employment Longevity

    ERIC Educational Resources Information Center

    Bebie, Kerry A.

    2012-01-01

    The purposes of this descriptive study were to better describe to the administrators of a Midwestern university the strengths and weaknesses of its physical education program, to furnish a description of the alumni with respect to employment longevity in the field of physical education, employment trends, and attitudes toward the program. The…

  14. Description of CASCOMP Comprehensive Airship Sizing and Performance Computer Program, Volume 2

    NASA Technical Reports Server (NTRS)

    Davis, J.

    1975-01-01

    The computer program CASCOMP, which may be used in comparative design studies of lighter than air vehicles by rapidly providing airship size and mission performance data, was prepared and documented. The program can be used to define design requirements such as weight breakdown, required propulsive power, and physical dimensions of airships which are designed to meet specified mission requirements. The program is also useful in sensitivity studies involving both design trade-offs and performance trade-offs. The input to the program primarily consists of a series of single point values such as hull overall fineness ratio, number of engines, airship hull and empennage drag coefficients, description of the mission profile, and weights of fixed equipment, fixed useful load and payload. In order to minimize computation time, the program makes ample use of optional computation paths.

  15. General Description of Fission Observables: GEF Model Code

    NASA Astrophysics Data System (ADS)

    Schmidt, K.-H.; Jurado, B.; Amouroux, C.; Schmitt, C.

    2016-01-01

    The GEF ("GEneral description of Fission observables") model code is documented. It describes the observables for spontaneous fission, neutron-induced fission and, more generally, for fission of a compound nucleus from any other entrance channel, with given excitation energy and angular momentum. The GEF model is applicable for a wide range of isotopes from Z = 80 to Z = 112 and beyond, up to excitation energies of about 100 MeV. The results of the GEF model are compared with fission barriers, fission probabilities, fission-fragment mass- and nuclide distributions, isomeric ratios, total kinetic energies, and prompt-neutron and prompt-gamma yields and energy spectra from neutron-induced and spontaneous fission. Derived properties of delayed neutrons and decay heat are also considered. The GEF model is based on a general approach to nuclear fission that explains a great part of the complex appearance of fission observables on the basis of fundamental laws of physics and general properties of microscopic systems and mathematical objects. The topographic theorem is used to estimate the fission-barrier heights from theoretical macroscopic saddle-point and ground-state masses and experimental ground-state masses. Motivated by the theoretically predicted early localisation of nucleonic wave functions in a necked-in shape, the properties of the relevant fragment shells are extracted. These are used to determine the depths and the widths of the fission valleys corresponding to the different fission channels and to describe the fission-fragment distributions and deformations at scission by a statistical approach. A modified composite nuclear-level-density formula is proposed. It respects some features in the superfluid regime that are in accordance with new experimental findings and with theoretical expectations. These are a constant-temperature behaviour that is consistent with a considerably increased heat capacity and an increased pairing condensation energy that is

  16. Descriptive accounts of thermodynamic and colloidal models of asphaltene flocculation

    SciTech Connect

    Leontaritis, K.J.; Kawanaka, S.; Mansoori, G.A.

    1987-01-01

    At the present the oil industry, basically, is combating the problem of asphaltene deposition through remedial rather than preventive techniques. Mechanical and chemical cleaning methods are being improvised to maintain production, transportation, and processing of petroleum at economical levels. There are a number of recent reports that indicate so. The research community, currently, is rather unfamiliar with the reasons and extent of the asphaltene deposition problem. This paper reviews the experiences of the oil industry with asphaltene precipitation and presents justifications and a descriptive account for the development of two different models for asphaltene flocculation. In one of the models the authors consider the asphaltenes to be dissolved in the oil in a true liquid state and dwell upon statistical thermodynamic techniques of multicomponent mixtures to predict their phase behavior. In the other model, they consider asphaltenes to exist in oil in a colloidal state, as minute suspended particles, and utilize colloidal science techniques to predict their colloidal behavior. Experimental work over the last 40 years suggests that asphaltenes possess a wide molecular weight distribution and they exist in both colloidal and dissolved states in the crude oil. Further pursue of the subject in this direction by both the industrial and research communities is warranted.

  17. System description of the Repository-Only System for the FY 1990 systems integration program studies. [CONTAINS GLOSSARY

    SciTech Connect

    McKee, R.W.; Young, J.R.; Konzek, G.J.

    1991-07-01

    This document provides both functional and physical descriptions of a conceptual high-level waste management system defined as a Repository-Only System. Its purpose is to provide a basis for required system computer modeling and system studies initiated in FY 1990 under the Systems Integration Program of the US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM). The Repository-Only System is designed to accept 3000 MTU per year of spent fuel and 400 equivalent MTU per year of high-level wastes disposal in the geologic repository. This document contains both functional descriptions of the processes in the waste management system and physical descriptions of the equipment and facilities necessary for performance of those processes. These descriptions contain the level of detail needed for the projected systems analysis studies. The Repository-Only System contains all system components, from the waste storage facilities of the waste generators to the underground facilities for final disposal of the wastes. The major facilities in the system are the waste generator waste storage facilities, a repository facility that packages the wastes and than emplaces them in the geologic repository, and the transportation equipment and facilities for transporting the wastes between these major facilities. 18 refs., 39 figs.

  18. ADVANCED UTILITY SIMULATION MODEL DESCRIPTION OF MODIFICATIONS TO THE STATE LEVEL MODEL (VERSION 3.0)

    EPA Science Inventory

    The report documents modifications to the state level model portion of the Advanced Utility Simulation Model (AUSM), one of four stationary source emission and control cost forecasting models developed for the National Acid Precipitation Assessment Program (NAPAP). The AUSM model...

  19. The Health Services Careers Program: A 1966-1974 Descriptive Profile and Program Evaluation. A Summary.

    ERIC Educational Resources Information Center

    Williams, Gerald D.

    The Health Services Careers Program (HSCP) at the Johns Hopkins Medical Institutions (JHMI) in East Baltimore is a multi-purpose, inter-agency program designed to facilitate part-time employment, on-the-job training, and guidance in health occupations for economically disadvantaged high school students. Since 1966, HSCP has enrolled over 1300…

  20. Modeling of fluidized-bed combustion of coal: Phase II, final reports. Volume II. Detailed description of the model

    SciTech Connect

    Louis, J.F.; Tung, S.E.

    1980-10-01

    This document is the second of a seven volume series of our Phase II Final Report. This volume deals with detailed descriptions of the structure of each program member (subroutines and functions), the interrelation between the members of a submodel, and the interrelation between the various submodels as such. The systems model for fluidized bed combustors (FBC-II) consists of a systematic combination of the following interrelated areas: fluid mechanics and bubble growth, char combustion and associated kinetics for particle burnout, sulfur capture, NO/sub x/ formation and reduction, freeboard reactions, and heat transfer. Program outline is shown in Figure 1.1. Input variables (supplied by the user are inspected to check that they lie inside the allowed range of values and are input to the various routines as needed. The necessary physical and fluid mechanical properties are calculated and utilized in estimating char combustion and sulfur capture in the bed and the freeboard. NO/sub x/ and CO emissions are estimated by taking into account all relevant chemical reactions. A material and energy balance is made over the bed. Figure 1.1 shows a block diagram of the systems program. In this diagram, the overall structure of the FBC program is illustrated in terms of the various submodels that together constitute the systems program. A more detailed outline of the systems program is shown in Figure 1.2. In this figure, all important subroutine members of the FBC program are shown, and their linkage to each other, as well as to the main program is indicated. A description of the exact sequence in which these various routines are called at time of program execution is provided in Chapter 8 under the executive routine MAIN.

  1. Terminal Area Productivity Airport Wind Analysis and Chicago O'Hare Model Description

    NASA Technical Reports Server (NTRS)

    Hemm, Robert; Shapiro, Gerald

    1998-01-01

    This paper describes two results from a continuing effort to provide accurate cost-benefit analyses of the NASA Terminal Area Productivity (TAP) program technologies. Previous tasks have developed airport capacity and delay models and completed preliminary cost benefit estimates for TAP technologies at 10 U.S. airports. This task covers two improvements to the capacity and delay models. The first improvement is the completion of a detailed model set for the Chicago O'Hare (ORD) airport. Previous analyses used a more general model to estimate the benefits for ORD. This paper contains a description of the model details with results corresponding to current conditions. The second improvement is the development of specific wind speed and direction criteria for use in the delay models to predict when the Aircraft Vortex Spacing System (AVOSS) will allow use of reduced landing separations. This paper includes a description of the criteria and an estimate of AVOSS utility for 10 airports based on analysis of 35 years of weather data.

  2. Radar Ocean Wave Spectrometer (ROWS) preprocessing program (PREROWS2.EXE). User's manual and program description

    NASA Technical Reports Server (NTRS)

    Vaughn, Charles R.

    1993-01-01

    This Technical Memorandum is a user's manual with additional program documentation for the computer program PREROWS2.EXE. PREROWS2 works with data collected by an ocean wave spectrometer that uses radar (ROWS) as an active remote sensor. The original ROWS data acquisition subsystem was replaced with a PC in 1990. PREROWS2.EXE is a compiled QuickBasic 4.5 program that unpacks the recorded data, displays various variables, and provides for copying blocks of data from the original 8mm tape to a PC file.

  3. Automatic reactor model synthesis with genetic programming.

    PubMed

    Dürrenmatt, David J; Gujer, Willi

    2012-01-01

    Successful modeling of wastewater treatment plant (WWTP) processes requires an accurate description of the plant hydraulics. Common methods such as tracer experiments are difficult and costly and thus have limited applicability in practice; engineers are often forced to rely on their experience only. An implementation of grammar-based genetic programming with an encoding to represent hydraulic reactor models as program trees should fill this gap: The encoding enables the algorithm to construct arbitrary reactor models compatible with common software used for WWTP modeling by linking building blocks, such as continuous stirred-tank reactors. Discharge measurements and influent and effluent concentrations are the only required inputs. As shown in a synthetic example, the technique can be used to identify a set of reactor models that perform equally well. Instead of being guided by experience, the most suitable model can now be chosen by the engineer from the set. In a second example, temperature measurements at the influent and effluent of a primary clarifier are used to generate a reactor model. A virtual tracer experiment performed on the reactor model has good agreement with a tracer experiment performed on-site. PMID:22277238

  4. Integrated Modeling Program, Applied Chemical Theory (IMPACT)

    PubMed Central

    BANKS, JAY L.; BEARD, HEGE S.; CAO, YIXIANG; CHO, ART E.; DAMM, WOLFGANG; FARID, RAMY; FELTS, ANTHONY K.; HALGREN, THOMAS A.; MAINZ, DANIEL T.; MAPLE, JON R.; MURPHY, ROBERT; PHILIPP, DEAN M.; REPASKY, MATTHEW P.; ZHANG, LINDA Y.; BERNE, BRUCE J.; FRIESNER, RICHARD A.; GALLICCHIO, EMILIO; LEVY, RONALD M.

    2009-01-01

    We provide an overview of the IMPACT molecular mechanics program with an emphasis on recent developments and a description of its current functionality. With respect to core molecular mechanics technologies we include a status report for the fixed charge and polarizable force fields that can be used with the program and illustrate how the force fields, when used together with new atom typing and parameter assignment modules, have greatly expanded the coverage of organic compounds and medicinally relevant ligands. As we discuss in this review, explicit solvent simulations have been used to guide our design of implicit solvent models based on the generalized Born framework and a novel nonpolar estimator that have recently been incorporated into the program. With IMPACT it is possible to use several different advanced conformational sampling algorithms based on combining features of molecular dynamics and Monte Carlo simulations. The program includes two specialized molecular mechanics modules: Glide, a high-throughput docking program, and QSite, a mixed quantum mechanics/molecular mechanics module. These modules employ the IMPACT infrastructure as a starting point for the construction of the protein model and assignment of molecular mechanics parameters, but have then been developed to meet specialized objectives with respect to sampling and the energy function. PMID:16211539

  5. Descriptive models for single-jet sluicing of sludge waste

    SciTech Connect

    Erian, F.F.; Mahoney, L.A.; Terrones, G.

    1997-12-01

    Mobilization of sludge waste stored in underground storage tanks can be achieved safely and reliably by sluicing. In the project discussed in this report, the waste in Hanford single-shell Tank 241-C-106 will be mobilized by sluicing, retrieved by a slurry retrieval pump, and transferred via an 1800-ft slurry pipeline to Tank 241-AY-102. A sluicing strategy must be developed that ensures efficient use of the deployed configuration of the sluicing system: the nozzle(s) and the retrieval pump(s). Given a sluicing system configuration in a particular tank, it is desirable to prescribe the sequential locations at which the sludge will be mobilized and retrieved and the rate at which these mobilization and retrieval processes take place. In addition, it is necessary to know whether the retrieved waste slurry meets the requirements for cross-site slurry transport. Some of the physical phenomena that take place during mobilization and retrieval and certain aspects of the sluicing process are described in this report. First, a mathematical model gives (1) an idealized geometrical representation of where, within the confines of a storage tank containing a certain amount of settled waste, sludge can be removed and mobilized; and (2) a quantitative measure of the amount of sludge that can be removed during a sluicing campaign. A model describing an idealized water jet issuing from a circular nozzle located at a given height above a flat surface is also presented in this report. This dynamic water-jet model provides the basis for improving the geometrical sluicing model presented next. In this model the authors assume that the water jet follows a straight trajectory toward a target point on a flat surface. However, the water jet does not follow a straight line in the actual tank, and using the true trajectory will allow a more accurate estimate of the amount of disturbed material. Also, the authors hope that developing accurate force and pressure fields will lead to a better

  6. Aerothermal modeling program, phase 1

    NASA Technical Reports Server (NTRS)

    Sturgess, G. J.

    1983-01-01

    The physical modeling embodied in the computational fluid dynamics codes is discussed. The objectives were to identify shortcomings in the models and to provide a program plan to improve the quantitative accuracy. The physical models studied were for: turbulent mass and momentum transport, heat release, liquid fuel spray, and gaseous radiation. The approach adopted was to test the models against appropriate benchmark-quality test cases from experiments in the literature for the constituent flows that together make up the combustor real flow.

  7. Description of the Weatherization Assistance Program in larger multifamily buildings for Program Year 1989

    SciTech Connect

    MacDonald, J.M.

    1993-04-01

    The efforts of the US Department of Energy (DOE) Weatherization Assistance Program (the Program) in larger multifamily buildings were examined for Program Year 1989. The results show that about 20,000 dwellings in these multifamily buildings were served under the Program that year. This is 9% of the total number of units served nationally, while costs were 7% of total national costs. High levels of activity in larger multifamily buildings were reported for some States, with New York accounting for half of all the residences treated. Owner investment is an important strategy in New York for improving their efforts. A wide range of measures was installed, but the materials costs for the measures are dominated by the cost of windows (80% of the total for that year). Where the whole building was treated, $561 was invested per unit, while for partial-building work the total invested was $417. The energy savings and cost effectiveness of the Program were not estimated, because energy use and cost data adequate for developing such estimates could not be obtained.

  8. Plutonium immobilization project development and testing quality assurance program description - February 1999

    SciTech Connect

    MacLean, L M; Ziemba, J

    1999-02-01

    Lawrence Livermore National Laboratory Immobilization Development and Testing organization (LLNL ID and T) is a Participant in the Plutonium Immobilization Project (PIP). The LLNL D and T has lead responsibilities for form characterization and qualification, ceramic form development, process/equipment development with plutonium, and process systems testing and validation for both conversion and immobilization. This work must be performed in accordance with the graded approach of a Quality Assurance (QA) Program. A QA Program has been developed at LLNL to meet the requirements of the DOE/MD Quality Assurance Requirements. The LLNL QA Program consists of a Quality Assurance Program Description (QAPD) and Quality Implementing Procedures. These documents interface and are a subset of the overall PIP QA Program Documents. The PIP QA Program is described in the PIP ID and T QA Plan, PIP QAPD, and QA Procedures. Other Participant Organizations also must document and describe their PIP compliant QA Programs in a QAPD and implementing procedures. The purpose of this LLNL QAPD is to describe the organization, management processes, QA Controls for Grading, functional responsibilities, levels of authority, and interfaces for those managing, performing, and assessing the adequacy of work.

  9. Automatic programming of simulation models

    NASA Technical Reports Server (NTRS)

    Schroer, Bernard J.; Tseng, Fan T.; Zhang, Shou X.; Dwan, Wen S.

    1988-01-01

    The objective of automatic programming is to improve the overall environment for describing the program. This improved environment is realized by a reduction in the amount of detail that the programmer needs to know and is exposed to. Furthermore, this improved environment is achieved by a specification language that is more natural to the user's problem domain and to the user's way of thinking and looking at the problem. The goal of this research is to apply the concepts of automatic programming (AP) to modeling discrete event simulation system. Specific emphasis is on the design and development of simulation tools to assist the modeler define or construct a model of the system and to then automatically write the corresponding simulation code in the target simulation language, GPSS/PC. A related goal is to evaluate the feasibility of various languages for constructing automatic programming simulation tools.

  10. Performance Analysis and Design Synthesis (PADS) computer program. Volume 2: Program description, part 1

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The Performance Analysis and Design Synthesis (PADS) computer program has a two-fold purpose. It can size launch vehicles in conjunction with calculus-of-variations optimal trajectories and can also be used as a general-purpose branched trajectory optimization program. In the former use, it has the Space Shuttle Synthesis Program as well as a simplified stage weight module for optimally sizing manned recoverable launch vehicles. For trajectory optimization alone or with sizing, PADS has two trajectory modules. The first trajectory module uses the method of steepest descent; the second employs the method of quasilinearization, which requires a starting solution from the first trajectory module. For Volume 1 see N73-13199.