Science.gov

Sample records for modified mesoporous silica

  1. Modified Mesoporous Silica for Efficient Siloxane Capture.

    PubMed

    Jafari, Tahereh; Jiang, Ting; Zhong, Wei; Khakpash, Nasser; Deljoo, Bahareh; Aindow, Mark; Singh, Prabhakar; Suib, Steven L

    2016-03-15

    In this study, octamethylcyclotetrasiloxane (D4) was removed by using a novel modified solid adsorbent of mesoporous silica. The adsorbent was synthesized using inverse micelles with some modifications in the synthesis process (temperature of gelation) and in the post treatment conditions (calcination temperature and heating rate) with a concomitant improvement of D4 uptake. This is the first report on regulating the textural properties of the mesoporous silica material UCT-14 to develop an active silica adsorbent. These adjustments resulted in an increase of the silica surface area from 391 to 798 m(2)·g(-1), which leads to a high capacity (686 mg·g(-1)) of D4-capture for the silica synthesized at 80 °C, calcined at 450 °C with the heating rate of 100 °C·min(-1) (Si-Syn80). This adsorbent showed comparable adsorption performance with the widely used commercial silica gel under dry and humid condition. Recyclability tests on the commercial silica gel and mesoporous silica synthesized at 120 °C and calcined at 450 °C with a heating rate of 100 °C·min(-1) (called Si-Syn120 or Si-450 or Si-100 °C·min(-1)) indicated that the Si-Syn120 (capacity drop 10%) is more efficient than silica gel (capacity drop 15%) after three cycles. Although, the presence of moisture (25%) in the nitrogen gas stream led to capacity reduction in both Si-Syn120 and commercial silica gel, the modified UCT-14 shows slightly better resistance to humid condition. PMID:26890152

  2. Multifunctional mesoporous silica catalyst

    DOEpatents

    Lin, Victor Shang-Yi; Tsai, Chih-Hsiang; Chen, Hung-Ting; Pruski, Marek; Kobayashi, Takeshi

    2015-03-31

    The present invention provides bifunctional silica mesoporous materials, including mesoporous silica nanoparticles ("MSN"), having pores modified with diarylammonium triflate and perfluoroaryl moieties, that are useful for the acid-catalyzed esterification of organic acids with organic alcohols.

  3. Investigation of Mg modified mesoporous silicas and their CO 2 adsorption capacities

    NASA Astrophysics Data System (ADS)

    Zhao, Huiling; Yan, Wei; Bian, Zijun; Hu, Jun; Liu, Honglai

    2012-02-01

    CO 2 adsorption properties on Mg modified silica mesoporous materials were investigated. By using the methods of co-condensation, dispersion and ion-exchange, Mg 2+ was introduced into SBA-15 and MCM-41, and transformed into MgO in the calcination process. The basic MgO can provide active sites to enhance the acidic CO 2 adsorption capacity. To improve the amount and the dispersion state of the loading MgO, the optimized modification conditions were also investigated. The XRD and TEM characteristic results, as well as the CO 2 adsorption performance showed that the CO 2 adsorption capacity not only depended on the pore structures of MCM-41 and SBA-15, but also on the improvement of the dispersion state of MgO by modification. Among various Mg modified silica mesoporous materials, the CO 2 adsorption capacity increased from 0.42 mmol g -1 of pure silica SBA-15 to 1.35 mmol g -1 of Mg-Al-SBA-15-I1 by the ion-exchange method enhanced with Al 3+ synergism. Moreover, it also increased from 0.67 mmol g -1 of pure silica MCM-41 to 1.32 mmol g -1 of Mg-EDA-MCM-41-D10 by the dispersion method enhanced with the incorporation of ethane diamine. The stability test by 10 CO 2 adsorption/desorption cycles showed Mg-urea-MCM-41-D10 possessed quite good recyclability.

  4. Development of efficient amine-modified mesoporous silica SBA-15 for CO{sub 2} capture

    SciTech Connect

    Zhang, Xiaoyun; Qin, Hongyan; Zheng, Xiuxin; Wu, Wei

    2013-10-15

    Graphical abstract: - Highlights: • A secondary amine AN-TEPA is used to modify the SBA-15. • CO{sub 2} adsorption capacity (180.1 mg g{sup −1}-adsorbent for 70% amine loading) is high. • The sorbent exhibits a high stability after 12 cycling runs. • The modified SBA-15 achieves complete desorption at low temperature (100 °C). - Abstract: A novel CO{sub 2} sorbent was prepared by impregnating mesoporous silica, SBA-15, with acrylonitrile (AN)-modified tetraethylenepentamine (TEPA) in order to increase CO{sub 2} adsorption capacity and improve cycling stability. The mesoporous silica with pre- and post-surface modification was investigated by X-ray diffraction characterization (XRD), N{sub 2} adsorption–desorption test (N{sub 2}-BET), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA). The adsorption/desorption performance of S-TN (TN: AN modified TEPA) and S-TEPA was studied by dynamic adsorption. Test results showed that the solid base-impregnated SBA-15 demonstrated high CO{sub 2} adsorption capacity (180.1 mg g{sup −1}-adsorbent for 70% amine loading level). Compared to S-TEPA (24.1% decrease of initial capacity), S-TN with 50% amine loading exhibited improved cycling stability, 99.9% activity reserved (from initial 153.0 mg g{sup −1} to 151.3 mg g{sup −1}) after 12 cycles of adsorption/desorption at 100 °C. A mechanism of molecular structure of the loaded amine was attributed to the improved performance.

  5. Removal of mercury from aqueous solution using mesoporous silica nanoparticles modified with polyamide receptor.

    PubMed

    He, Chunsheng; Ren, Long; Zhu, Weiping; Xu, Yufang; Qian, Xuhong

    2015-11-15

    Based on the principle of supramolecular recognition and fluorescent chemical sensors, a novel kind of material for the separation of toxic heavy metal ions was designed and synthesized. Mesoporous silica nanoparticles MCM-41 with high surface areas and large ordered pores were used as the supporting matrix. Poly-amide derivative, was grafted to the mesoporous silica nanoparticles for extracting and separating trace Hg(2+) from aqueous solution, with a short adsorption time (t=3min) and a wide range of pH application (pH 3-11). The separation material could also extract trace mercury from Traditional Chinese Medicine, and has no influence on their effective components. PMID:26232282

  6. Synthesis of Biomolecule-Modified Mesoporous Silica Nanoparticles for Targeted Hydrophobic Drug Delivery to Cancer Cells

    PubMed Central

    Ferris, Daniel P.; Lu, Jie; Gothard, Chris; Yanes, Rolando; Thomas, Courtney R.; Olsen, John-Carl; Stoddart, J. Fraser; Tamanoi, Fuyuhiko; Zink, Jeffrey I.

    2011-01-01

    Synthetic methodologies integrating hydrophobic drug delivery and biomolecular targeting with mesoporous silica nanoparticles are described. Transferrin and cyclic-RGD peptides are covalently attached to the nanoparticles utilizing different techniques and provide selectivity between primary and metastatic cancer cells. The increase in cellular uptake of the targeted particles is examined using fluorescence microscopy and flow cytometry. Transferrin-modified silica nanoparticles display enhancement in particle uptake by Panc-1 cancer cells over that of normal HFF cells. The endocytotic pathway for these particles is further investigated through plasmid transfection of the transferrin receptor into the normal HFF cell line, which results in an increase in particle endocytosis as compared to unmodified HFF cells. By designing and attaching a synthetic cyclic-RGD, selectivity between primary cancer cells (BT-549) and metastatic cancer cells (MDA-MB 435) is achieved with enhanced particle uptake by the metastatic cancer cell line. Incorporation of the hydrophobic drug Camptothecin into these two types of biomolecular-targeted nanoparticles causes an increase in mortality of the targeted cancer cells compared to that caused by both the free drug and nontargeted particles. These results demonstrate successful biomolecular-targeted hydrophobic drug delivery carriers that selectively target specific cancer cells and result in enhanced drug delivery and cell mortality. PMID:21595023

  7. SBA-15 Mesoporous Silica Modified with Gallic Acid and Evaluation of Its Cytotoxic Activity

    PubMed Central

    Lewandowski, Dawid

    2015-01-01

    Gallic acid has been covalently conjugated to SBA-15 mesoporous silica surface through different linkers. Cytotoxic activity of the hybrid organic-inorganic systems against HeLa and KB cell lines has been analyzed. Up to 67% of HeLa or KB tumor cells growth inhibition has been achieved at low silica concentration used (10 μg mL-1). PMID:26151908

  8. Simultaneous determination of hydroquinone and catechol at gold nanoparticles mesoporous silica modified carbon paste electrode.

    PubMed

    Tashkhourian, J; Daneshi, M; Nami-Ana, F; Behbahani, M; Bagheri, A

    2016-11-15

    A new electrochemical sensor based on gold nanoparticles mesoporous silica modified carbon paste electrode (AuNPs-MPS) was developed for simultaneous determination of hydroquinone and catechol. Morphology and structure of the AuNPs-MPS were characterized by transmission electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopy. The electrochemical behavior of hydroquinone and catechol were investigated using square wave voltammetry and the results indicate that the electrochemical responses are improved significantly at the modified electrode. The observed oxidative peaks separation of about 120mV made possible the simultaneous determination of hydroquinone and catechol in their binary-mixture. Under the optimized condition, a linear dynamic range of 10.0μM-1.0mM range for hydroquinone with the detection limit of 1.2μM and from 30.0μM-1.0mM for catechol with the detection limit of 1.1μM were obtained. The applicability of the method was demonstrated by the recovery studies of hydroquinone and catechol in spiked tap water samples. PMID:27420383

  9. pH-Sensitive drug delivery system based on modified dextrin coated mesoporous silica nanoparticles.

    PubMed

    Chen, Hongyu; Zheng, Diwei; Liu, Jia; Kuang, Ying; Li, Qilin; Zhang, Min; Ye, Haifeng; Qin, Hongyang; Xu, Yanglin; Li, Cao; Jiang, Bingbing

    2016-04-01

    In this work, a novel pH-sensitive drug delivery system based on modified dextrin coated mesoporous silica nanoparticles (MSNs), DOX@MSN-DDA-CL, are prepared. The dextrin grafting on the surface of MSNs is oxidized by KIO4 to obtain dextrin dialdehyde, which is then cross-linked by tetraethylenepentamine through a pH-sensitive Schiff's base. Under physiological conditions, the cross-linked dextrin dialdehyde blocks the pores to prevent premature release of model drug doxorubicin hydrochloride (DOX). In the weak acidic environment, pH 6.0 in this work, the Schiff's base can be hydrolyzed and released the drug. The in vitro drug release studies at different pHs prove the pH-sensitivity of DOX@MSN-DDA-CL. The cytotoxicity and cell internalization behavior are also investigated in detail. In vivo tissue distribution and pharmacokinetics with a H22-bearing mouse animal mode are also studied, prove that DOX@MSN-DDA-CL has a longer retention time than that of pure DOX and can accumulate in tumor region via enhanced permeation and retention and nanomaterials-induced endothelial cell leakiness effects. In conclusion, the pH-sensitive modified dextrin/MSNs complex drug delivery system has a great potential for cancer therapy. PMID:26776872

  10. Hyaluronic acid modified mesoporous silica nanoparticles for targeted drug delivery to CD44-overexpressing cancer cells

    NASA Astrophysics Data System (ADS)

    Yu, Meihua; Jambhrunkar, Siddharth; Thorn, Peter; Chen, Jiezhong; Gu, Wenyi; Yu, Chengzhong

    2012-12-01

    In this paper, a targeted drug delivery system has been developed based on hyaluronic acid (HA) modified mesoporous silica nanoparticles (MSNs). HA-MSNs possess a specific affinity to CD44 over-expressed on the surface of a specific cancer cell line, HCT-116 (human colon cancer cells). The cellular uptake performance of fluorescently labelled MSNs with and without HA modification has been evaluated by confocal microscopy and fluorescence-activated cell sorter (FACS) analysis. Compared to bare MSNs, HA-MSNs exhibit a higher cellular uptake via HA receptor mediated endocytosis. An anticancer drug, doxorubicin hydrochloride (Dox), has been loaded into MSNs and HA-MSNs as drug delivery vehicles. Dox loaded HA-MSNs show greater cytotoxicity to HCT-116 cells than free Dox and Dox-MSNs due to the enhanced cell internalization behavior of HA-MSNs. It is expected that HA-MSNs have a great potential in targeted delivery of anticancer drugs to CD44 over-expressing tumors.

  11. Multifunctional mesoporous silica nanoparticles modified with tumor-shedable hyaluronic acid as carriers for doxorubicin.

    PubMed

    Zhang, Jing; Sun, Yujie; Tian, Baocheng; Li, Keke; Wang, Lele; Liang, Yan; Han, Jingtian

    2016-08-01

    In this paper, a CD44-targeted and redox-responsive drug delivery system based on mesoporous silica nanoparticles (MSNs) was synthesized by conjugating tumor-shedable hyaluronic acid (HA) on the surface of MSNs via disulfide bonds. Doxorubicin hydrochloride (DOX·HCl) was physically encapsulated into HA modified MSNs (MSNs/SS/HA@DOX) as a model drug. MSNs/SS/HA@DOX (40nm) had a high drug loading (14.1%) and redox-responsive drug release property. The cellular uptake behaviors of MSNs/SS/HA@DOX by HeLa and LO2 cells were evaluated by confocal laser scanning microscopy (CLSM) and flow cytometry (FCM). MSNs/SS/HA@DOX exhibited higher cellular uptake efficacy via CD44-mediated endocytosis by HeLa cells (CD44 over-expressed cells) than by LO2 cells (CD44 deficient cells). The in vitro cytotoxicity assay demonstrated that MSNs/SS/HA@DOX exhibited higher cytotoxicity to HeLa cells than to LO2 cells. These results indicated that MSNs/SS/HA@DOX might be promising as a multifunctional drug delivery system to improve the anti-tumor efficacy of chemotherapeutic drugs. PMID:27107383

  12. Highly sensitive and stable relative humidity sensors based on WO3 modified mesoporous silica

    NASA Astrophysics Data System (ADS)

    Tomer, Vijay K.; Duhan, Surender

    2015-02-01

    This study investigates the effectiveness of using WO3 loaded mesoporous silica nanocomposite developed using one step hydrothermal method for measuring relative humidity (RH) at room temperature. On measuring the sensing response, the nanocomposite sensor exhibits excellent linearity, negligible hysteresis, swift response and recovery time, good repeatability, and outstanding stability in 11%-98% RH range. The complex impedance spectra of the sensor at different RHs were used to explore the humidity sensing mechanism. This work could encourage a right approach to blueprint practical humidity sensors with high sensitivity, long stability and fast response/recovery time.

  13. Synthesis of mesoporous silica nanoparticles.

    PubMed

    Wu, Si-Han; Mou, Chung-Yuan; Lin, Hong-Ping

    2013-05-01

    Good control of the morphology, particle size, uniformity and dispersity of mesoporous silica nanoparticles (MSNs) is of increasing importance to their use in catalyst, adsorption, polymer filler, optical devices, bio-imaging, drug delivery, and biomedical applications. This review discusses different synthesis methodologies to prepare well-dispersed MSNs and hollow silica nanoparticles (HSNs) with tunable dimensions ranging from a few to hundreds of nanometers of different mesostructures. The methods include fast self-assembly, soft and hard templating, a modified Stöber method, dissolving-reconstruction and modified aerogel approaches. In practical applications, the MSNs prepared by these methods demonstrate good potential for use in high-performance catalysis, antireflection coating, transparent polymer-MSNs nanocomposites, drug-release and theranostic systems. PMID:23403864

  14. Pb (II) removal from aqueous media by EDTA-modified mesoporous silica SBA-15.

    PubMed

    Huang, Jin; Ye, Meng; Qu, Yuqi; Chu, Lianfeng; Chen, Rui; He, Qizhuang; Xu, Dongfang

    2012-11-01

    An organic-inorganic hybrid mesoporous silica material was synthesized by two-step post-grafting method of SBA-15 with 3-aminopropyltrimethoxy-silane (APTES) and thionyl dichloride (SOCl(2)) activated ethylenediaminetetraacetic acid (EDTA) in sequence and measured by means of Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), elemental analysis (EA), transmission electron microscopy (TEM), nitrogen (N(2)) adsorption-desorption analysis and back titration. The material was found having the beneficial properties of mesoporous silica SBA-15 and EDTA. Adsorption potential of the material for Pb (II) removal from aqueous solution was investigated by varying experimental conditions such as pH, contact time and initial metal concentration. The removal efficiency of Pb(2+) was high under studied experimental conditions. The adsorption equilibrium could be reached within 20 min and the kinetic data were fitted well by pseudo-second-order and intraparticle diffusion model. The adsorbent exhibited a favorable performance and its maximum adsorption capacity calculated by the Langmuir model was 273.2 mg g(-1). Recycling experiments showed the adsorbent could be regenerated by acid treatment without altering its properties. The chemical states of the elements involved in the adsorption were analyzed by X-ray photoelectron spectroscopy (XPS). The results demonstrated that the adsorption mechanism of the material involved Na Pb ion-exchange and carboxyl group dominated surface complexation. PMID:22874637

  15. Modifying mesoporous silica nanoparticles to avoid the metabolic deactivation of 6-mercaptopurine and methotrexate in combinatorial chemotherapy

    NASA Astrophysics Data System (ADS)

    Wang, Wenjing; Fang, Chenjie; Wang, Xiaozhu; Chen, Yuxi; Wang, Yaonan; Feng, Wei; Yan, Chunhua; Zhao, Ming; Peng, Shiqi

    2013-06-01

    Mesoporous silica nanoparticles with amino and thiol groups (MSNSN) were prepared and covalently modified with methotrexate and 6-mercaptopurine to form 6-MP-MSNSN-MTX. In the presence of DTT, 6-MP-MSNSN-MTX gradually releases 6-MP. In rat plasma, 6-MP-MSNSN-MTX effectively inhibits the metabolic deactivation of 6-MP and MTX. 6-MP-MSNSN-MTX could be an agent for long-acting chemotherapy.Mesoporous silica nanoparticles with amino and thiol groups (MSNSN) were prepared and covalently modified with methotrexate and 6-mercaptopurine to form 6-MP-MSNSN-MTX. In the presence of DTT, 6-MP-MSNSN-MTX gradually releases 6-MP. In rat plasma, 6-MP-MSNSN-MTX effectively inhibits the metabolic deactivation of 6-MP and MTX. 6-MP-MSNSN-MTX could be an agent for long-acting chemotherapy. Electronic supplementary information (ESI) available: Experimental details of the synthesis and in vitro and in vivo assays. See DOI: 10.1039/c3nr00227f

  16. Cellular Endocytosis and Trafficking of Cholera Toxin B-Modified Mesoporous Silica Nanoparticles

    PubMed Central

    Walker, William A.; Tarannum, Mubin; Vivero-Escoto, Juan L.

    2016-01-01

    In this study, mesoporous silica nanoparticles (MSNs) were functionalized with Cholera toxin subunit B (CTxB) protein to influence their intracellular trafficking pathways. The CTxB-MSN carrier was synthesized, and its chemical and structural properties were characterized. Endocytic pathway inhibition assays showed that the uptake of CTxB-MSNs in human cervical cancer (HeLa) cells was partially facilitated by both chlatrin- and caveolae-mediated endocytosis mechanisms. Laser scanning confocal microscopy (LSCM) experiments demonstrated that CTxB-MSNs were taken up by the cells and partially trafficked through the trans-Golgi network into to the endoplasmic reticulum in a retrograde fashion. The delivery abilities of CTxB-MSNs were evaluated using propidium iodide, an impermeable cell membrane dye. LSCM images depicted the release of propidium iodide in the endoplasmic reticulum and cell nucleus of HeLa cells. PMID:27134749

  17. Development of TRPN dendrimer-modified disordered mesoporous silica for CO{sub 2} capture

    SciTech Connect

    Zhang, Xiaoyun; Zhang, Sisi; Qin, Hongyan; Wu, Wei

    2014-08-15

    Highlights: • A novel series of TRPN dendrimers are synthesized. • Structurally disordered mesoporous silica was used to develop the CO{sub 2} adsorbent. • The CO{sub 2} adsorption capacity is relatively high. • The sorbent exhibits a high stability after 12 cycling runs. • The sorbent achieves complete desorption at low temperature (60 °C). - Abstract: A novel series of tri(3-aminopropyl) amine (TRPN) dendrimers were synthesized and impregnated on structurally disordered mesoporous silica (DMS) to generate CO{sub 2} adsorbents (TS). The physicochemical and adsorption properties of the adsorbents before and after dendrimer modification were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and N{sub 2} adsorption–desorption (N{sub 2}-BET) techniques. CO{sub 2} adsorption–desorption tests indicated that the sorbent demonstrates high CO{sub 2} adsorption capacity (138.1 mg g{sup −1} for G1 sample TS-G1-3CN-50 and 91.7 mg g{sup −1} for G2 sample TS-G2-6CN-50), and can completely desorb CO{sub 2} under vacuum at 60 °C. Its CO{sub 2} adsorption capacity at 25 °C increases with the amine loading, achieving the highest adsorption capacity (140.6 mg g{sup −1} for TS-G1-3CN) at 60%. The developed TS materials exhibited excellent cycling stability. After 12 consecutive adsorption–desorption runs, TS-G1-3CN-50 shows an adsorption capacity of 136.0 mg g{sup −1}, retaining 98.5% of its original value.

  18. Preparation and characterization of mesoporous silicas modified with chiral selectors as stationary phase for high-performance liquid chromatography.

    PubMed

    Pérez-Quintanilla, Damián; Morante-Zarcero, Sonia; Sierra, Isabel

    2014-01-15

    New hybrid materials were prepared as novel chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC). Pure mesoporous silica (SM) and ethylene-bridged periodic mesostructured organosilica (PMO) were functionalized, by a post-synthesis method, with derivates of erythromycin and vancomycin. N2 adsorption-desorption measurements, XRD, FT-IR, MAS NMR, SEM, TEM and elemental analysis were used to characterize the physico-chemical properties of these mesostructured materials, before and after the modification process. The synthesized particles had non-symmetrical 3-D wormhole-like mesostructure, spherical morphology, and a mean pore diameter between 53 and 59 Å. CSPs prepared were tested for the separation of four chiral β-blockers (atenolol, metoprolol, pindolol and propranolol) in normal phase (NP) and polar organic phase (PO) elution modes. Much stronger chiral interaction was observed in vancomycin-modified silicas. Results obtained in these preliminary studies will permit in future works to improve the synthesis route in order to design mesoporous materials with better performance as a chiral stationary phase for HPLC. PMID:24231079

  19. Comparison of bare and amino modified mesoporous silica@poly(ethyleneimine)s xerogel as indomethacin carrier: Superiority of amino modification.

    PubMed

    Li, Jing; Xu, Lu; Wang, Hongyu; Yang, Baixue; Liu, Hongzhuo; Pan, Weisan; Li, Sanming

    2016-02-01

    The purpose of this study was to facilely develop amino modified mesoporous silica xerogel synthesized using biomimetic method (B-AMSX) and to investigate its potential ability to be a drug carrier for loading poorly water-soluble drug indomethacin (IMC). For comparison, mesoporous silica xerogel without amino modification (B-MSX) was also synthesized using the same method. The changes of characteristics before and after IMC loading were systemically studied using fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS) and nitrogen adsorption/desorption analysis. The results showed that B-MSX and B-AMSX were spherical nanoparticles with mesoporous structure. Compared with B-MSX, IMC loading capacity of B-AMSX was higher because more drug molecules can be loaded through stronger hydrogen bonding force. DSC and SAXS analysis confirmed the amorphous state of IMC after being loaded into B-MSX and B-AMSX. The in vitro drug release study revealed that B-MSX and B-AMSX improved IMC release significantly, and B-AMSX released IMC a little faster than B-MSX because of larger pore diameter of IMC-AMSX. B-MSX and B-AMSX degraded gradually in dissolution medium evidenced by color reaction and absorbance value, and B-AMSX degraded slower than B-MSX due to amino modification. In conclusion, B-AMSX with superiority of higher loading capacity and enhanced dissolution release can be considered to be a good candidate as drug carrier for IMC. PMID:26652425

  20. Carbon Paste Electrode Modified with Carbamoylphosphonic Acid Functionalized Mesoporous Silica: A New Mercury-Free Sensor for Uranium Detection

    SciTech Connect

    Yantasee, Wassana; Lin, Yuehe; Fryxell, Glen E.; Wang, Zheming

    2004-05-20

    This study reports a new approach for developing a uranium (U(VI)) electrochemical sensor that is mercury-free, solid-state, and has less chance for ligand depletion than existing sensors. A carbon-paste electrode modified with carbamoylphosphonic acid self-assembled monolayer on mesoporous silica was developed for uranium detection based on an adsorptive square-wave stripping voltammetry technique. Voltammetric responses for U(VI) detection are reported as a function of pH, preconcentration time, and aqueous phase U(VI) concentration. The uranium detection limit is 25 ppb after 5 minutes preconcentration and improved to 1 ppb after 20 minutes preconcentration. The relative standard deviations are normally less than 5%.

  1. Charge-Reversal APTES-Modified Mesoporous Silica Nanoparticles with High Drug Loading and Release Controllability.

    PubMed

    Wang, Yifeng; Sun, Yi; Wang, Jine; Yang, Yang; Li, Yulin; Yuan, Yuan; Liu, Changsheng

    2016-07-13

    In this study, we demonstrate a facile strategy (DL-SF) for developing MSN-based nanosystems through drug loading (DL, using doxorubicin as a model drug) followed by surface functionalization (SF) of mesoporous silica nanoparticles (MSNs) via aqueous (3-aminopropyl)triethoxysilane (APTES) silylation. For comparison, a reverse functionalization process (i.e., SF-DL) was also studied. The pre-DL process allows for an efficient encapsulation (encapsulation efficiency of ∼75%) of an anticancer drug [doxorubicin (DOX)] inside MSNs, and post-SF allows in situ formation of an APTES outer layer to restrict DOX leakage under physiological conditions. This method makes it possible to tune the DOX release rate by increasing the APTES decoration density through variation of the APTES concentration. However, the SF-DL approach results in a rapid decrease in drug loading capacity with an increase in APTES concentration because of the formation of the APTES outer layer hampers the inner permeability of the DOX drug, resulting in a burst release similar to that of undecorated MSNs. The resulting DOX-loaded DL-SF MSNs present a slightly negatively charged surface under physiological conditions and become positively charged in and extracellular microenvironment of solid tumor due to the protonation effect under acidic conditions. These merits aid their maintenance of long-term stability in blood circulation, high cellular uptake by a kind of skin carcinoma cells, and an enhanced intracellular drug release behavior, showing their potential in the delivery of many drugs beyond anticancer chemotherapeutics. PMID:27314423

  2. Modified Mesoporous Silica (SBA–15) with Trithiane as a new effective adsorbent for mercury ions removal from aqueous environment

    PubMed Central

    2014-01-01

    Background Removal of mercury from aqueous environment has been highly regarded in recent years and different methods have been tested for this purpose. One of the most effective ways for mercury ions (Hg+2) removal is the use of modified nano porous compounds. Hence, in this work a new physical modification of mesoporous silica (SBA-15) with 1, 3, 5 (Trithiane) as modifier ligand and its application for the removal of Hg+2 from aqueous environment has been investigated. SBA-15 and Trithiane were synthesized and the presence of ligand in the silica framework was demonstrated by FTIR spectrum. The amounts of Hg+2 in the samples were determined by cold vapor generation high resolution continuum source atomic absorption spectroscopy. Also, the effects of pH, stirring time and weight of modified SBA-15 as three major parameters for effective adsorption of Hg+2 were studied. Results The important parameter for the modification of the adsorbent was Modification ratio between ligand and adsorbent in solution which was 1.5. The results showed that the best Hg+2 removal condition was achieved at pH = 5.0, stirring time 15 min and 15.0 mg of modified adsorbent. Moreover, the maximum percentage removal of Hg+2 and the capacity of adsorbent were 85% and 10.6 mg of Hg+2/g modified SBA-15, respectively. Conclusions To sum up, the present investigation introduced a new modified nano porous compound as an efficient adsorbent for removal of Hg+2 from aqueous environment. PMID:25097760

  3. Modeling of boldine alkaloid adsorption onto pure and propyl-sulfonic acid-modified mesoporous silicas. A comparative study.

    PubMed

    Geszke-Moritz, Małgorzata; Moritz, Michał

    2016-12-01

    The present study deals with the adsorption of boldine onto pure and propyl-sulfonic acid-functionalized SBA-15, SBA-16 and mesocellular foam (MCF) materials. Siliceous adsorbents were characterized by nitrogen sorption analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier-transform infrared (FT-IR) spectroscopy and thermogravimetric analysis. The equilibrium adsorption data were analyzed using the Langmuir, Freundlich, Redlich-Peterson, and Temkin isotherms. Moreover, the Dubinin-Radushkevich and Dubinin-Astakhov isotherm models based on the Polanyi adsorption potential were employed. The latter was calculated using two alternative formulas including solubility-normalized (S-model) and empirical C-model. In order to find the best-fit isotherm, both linear regression and nonlinear fitting analysis were carried out. The Dubinin-Astakhov (S-model) isotherm revealed the best fit to the experimental points for adsorption of boldine onto pure mesoporous materials using both linear and nonlinear fitting analysis. Meanwhile, the process of boldine sorption onto modified silicas was described the best by the Langmuir and Temkin isotherms using linear regression and nonlinear fitting analysis, respectively. The values of adsorption energy (below 8kJ/mol) indicate the physical nature of boldine adsorption onto unmodified silicas whereas the ionic interactions seem to be the main force of alkaloid adsorption onto functionalized sorbents (energy of adsorption above 8kJ/mol). PMID:27612776

  4. Mesoporous Silica Nanoparticle-Stabilized and Manganese-Modified Rhodium Nanoparticles as Catalysts for Highly Selective Synthesis of Ethanol and Acetaldehyde from Syngas

    SciTech Connect

    Huang, Yulin; Deng, Weihua; Guo, Enruo; Chung, Po-Wen; Chen, Senniang; Trewyn, Brian; Brown, Robert; Lin, Victor

    2012-03-30

    Well-defined and monodispersed rhodium nanoparticles as small as approximately 2 nm were encapsulated in situ and stabilized in a mesoporous silica nanoparticle (MSN) framework during the synthesis of the mesoporous material. Although both the activity and selectivity of MSN-encapsulated rhodium nanoparticles in CO hydrogenation could be improved by the addition of manganese oxide as expected, the carbon selectivity for C2 oxygenates (including ethanol and acetaldehyde) was unprecedentedly high at 74.5 % with a very small amount of methanol produced if rhodium nanoparticles were modified by manganese oxide with very close interaction.

  5. Functionalized bimodal mesoporous silicas as carriers for controlled aspirin delivery

    NASA Astrophysics Data System (ADS)

    Gao, Lin; Sun, Jihong; Li, Yuzhen

    2011-08-01

    The bimodal mesoporous silica modified with 3-aminopropyltriethoxysilane was performed as the aspirin carrier. The samples' structure, drug loading and release profiles were characterized with X-ray diffraction, scanning electron microscopy, N 2 adsorption and desorption, Fourier transform infrared spectroscopy, TG analysis, elemental analysis and UV-spectrophotometer. For further exploring the effects of the bimodal mesopores on the drug delivery behavior, the unimodal mesoporous material MCM-41 was also modified as the aspirin carrier. Meantime, Korsmeyer-Peppas equation ft= ktn was employed to analyze the dissolution data in details. It is indicated that the bimodal mesopores are beneficial for unrestricted drug molecules diffusing and therefore lead to a higher loading and faster releasing than that of MCM-41. The results show that the aspirin delivery properties are influenced considerably by the mesoporous matrix, whereas the large pore of bimodal mesoporous silica is the key point for the improved controlled-release properties.

  6. Cetuximab-modified mesoporous silica nano-medicine specifically targets EGFR-mutant lung cancer and overcomes drug resistance.

    PubMed

    Wang, Yuetong; Huang, Hsin-Yi; Yang, Liu; Zhang, Zhanxia; Ji, Hongbin

    2016-01-01

    Drug resistance to tyrosine kinase inhibitor (TKI) is the main obstacle for efficient treatment of epidermal growth factor receptor (EGFR)-mutant lung cancer patients. Here we design a cetuximab-capped mesoporous silica nanoparticle (MP-SiO2 NP) as the drug carrier to specifically target EGFR-mutant lung cancer cells and efficiently release loaded drugs including doxorubicin and gefitinib. This innovative nano-medicine can specifically target lung cancer cells with high EGFR expression rather than those with low EGFR level. Treatment of a gefitinib-resistant cell line derived from PC9 cell (PC9-DR) with the gefitinib-loaded cetuximab-capped MP-SiO2 NP showed a significant inhibition of cell growth. Moreover, this nano-medicine successfully suppressed the progression of PC9-DR xenograft tumors. This tumor suppression was due to the endocytosis of large amount of nano-medicine and the effective gefitinib release induced by high glutathione (GSH) level in PC9-DR cells. Collectively, our study provides a novel approach to overcome EGFR-TKI resistance using cetuximab modified MP-SiO2 NP, which holds strong potential for effective management of EGFR-mutant lung cancer. PMID:27151505

  7. Cetuximab-modified mesoporous silica nano-medicine specifically targets EGFR-mutant lung cancer and overcomes drug resistance

    PubMed Central

    Wang, Yuetong; Huang, Hsin-Yi; Yang, Liu; Zhang, Zhanxia; Ji, Hongbin

    2016-01-01

    Drug resistance to tyrosine kinase inhibitor (TKI) is the main obstacle for efficient treatment of epidermal growth factor receptor (EGFR)-mutant lung cancer patients. Here we design a cetuximab-capped mesoporous silica nanoparticle (MP-SiO2 NP) as the drug carrier to specifically target EGFR-mutant lung cancer cells and efficiently release loaded drugs including doxorubicin and gefitinib. This innovative nano-medicine can specifically target lung cancer cells with high EGFR expression rather than those with low EGFR level. Treatment of a gefitinib-resistant cell line derived from PC9 cell (PC9-DR) with the gefitinib-loaded cetuximab-capped MP-SiO2 NP showed a significant inhibition of cell growth. Moreover, this nano-medicine successfully suppressed the progression of PC9-DR xenograft tumors. This tumor suppression was due to the endocytosis of large amount of nano-medicine and the effective gefitinib release induced by high glutathione (GSH) level in PC9-DR cells. Collectively, our study provides a novel approach to overcome EGFR-TKI resistance using cetuximab modified MP-SiO2 NP, which holds strong potential for effective management of EGFR-mutant lung cancer. PMID:27151505

  8. Mesoporous Silica: A Suitable Adsorbent for Amines

    PubMed Central

    2009-01-01

    Mesoporous silica with KIT-6 structure was investigated as a preconcentrating material in chromatographic systems for ammonia and trimethylamine. Its adsorption capacity was compared to that of existing commercial materials, showing its increased adsorption power. In addition, KIT-6 mesoporous silica efficiently adsorbs both gases, while none of the employed commercial adsorbents did. This means that KIT-6 Mesoporous silica may be a good choice for integrated chromatography/gas sensing micro-devices. PMID:20628459

  9. Cellular membrane trafficking of mesoporous silica nanoparticles

    SciTech Connect

    Fang, I-Ju

    2012-01-01

    This dissertation mainly focuses on the investigation of the cellular membrane trafficking of mesoporous silica nanoparticles. We are interested in the study of endocytosis and exocytosis behaviors of mesoporous silica nanoparticles with desired surface functionality. The relationship between mesoporous silica nanoparticles and membrane trafficking of cells, either cancerous cells or normal cells was examined. Since mesoporous silica nanoparticles were applied in many drug delivery cases, the endocytotic efficiency of mesoporous silica nanoparticles needs to be investigated in more details in order to design the cellular drug delivery system in the controlled way. It is well known that cells can engulf some molecules outside of the cells through a receptor-ligand associated endocytosis. We are interested to determine if those biomolecules binding to cell surface receptors can be utilized on mesoporous silica nanoparticle materials to improve the uptake efficiency or govern the mechanism of endocytosis of mesoporous silica nanoparticles. Arginine-glycine-aspartate (RGD) is a small peptide recognized by cell integrin receptors and it was reported that avidin internalization was highly promoted by tumor lectin. Both RGD and avidin were linked to the surface of mesoporous silica nanoparticle materials to investigate the effect of receptor-associated biomolecule on cellular endocytosis efficiency. The effect of ligand types, ligand conformation and ligand density were discussed in Chapter 2 and 3. Furthermore, the exocytosis of mesoporous silica nanoparticles is very attractive for biological applications. The cellular protein sequestration study of mesoporous silica nanoparticles was examined for further information of the intracellular pathway of endocytosed mesoporous silica nanoparticle materials. The surface functionality of mesoporous silica nanoparticle materials demonstrated selectivity among the materials and cancer and normal cell lines. We aimed to determine

  10. Incorporation of antimicrobial compounds in mesoporous silica film monolith.

    PubMed

    Izquierdo-Barba, Isabel; Vallet-Regí, María; Kupferschmidt, Natalia; Terasaki, Osamu; Schmidtchen, Artur; Malmsten, Martin

    2009-10-01

    Incorporation of the antimicrobial peptide LL-37 (LLGDFFRKSKEKIGKEFKRIVQRIKDFLRNLVPRTES), as well as low molecular weight antimicrobial chlorhexidine, into mesoporous silica was obtained using an EISA one-pot synthesis method. FTIR confirmed efficient encapsulation of both LL-37 and chlorhexidine into mesoporous silica, while XRD and TEM showed that antimicrobial agent incorporation can be achieved without greatly affecting the structure of the mesoporous silica. The modified mesoporous silica released LL-37 and chlorhexidine slowly, reaching maximum release after about 200 h. The release rate could also be controlled through incorporation of SH groups in the pore walls, adding to pore hydrophobicity and reducing the release rate by about 50% compared to the unmodified mesoporous silica. Mesoporous silica containing either LL-37 or chlorhexidine displayed potent bactericidal properties against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. While chlorhexidine-loaded mesoporous silica displayed an accompanying high toxicity, as judged from hemolysis, LDH release, and MTT assay, the corresponding material containing LL-37 showed very low toxicity by all these assays, comparable to that observed for mesoporous silica in the absence of antibacterial drug, as well as to the negative controls in the respective assays. Mesoporous silica containing LL-37 therefore holds potential as an implantable material or a surface coating for such materials, as it combines potent bactericidal action with low toxicity, important features for controlling implant-related infections, e.g., for multi-resistant pathogens or for cases where access to the infection site of systemically administered antibiotics is limited due to collagen capsule formation or other factors. PMID:19628277

  11. Functionalized bimodal mesoporous silicas as carriers for controlled aspirin delivery

    SciTech Connect

    Gao Lin; Sun Jihong; Li Yuzhen

    2011-08-15

    The bimodal mesoporous silica modified with 3-aminopropyltriethoxysilane was performed as the aspirin carrier. The samples' structure, drug loading and release profiles were characterized with X-ray diffraction, scanning electron microscopy, N{sub 2} adsorption and desorption, Fourier transform infrared spectroscopy, TG analysis, elemental analysis and UV-spectrophotometer. For further exploring the effects of the bimodal mesopores on the drug delivery behavior, the unimodal mesoporous material MCM-41 was also modified as the aspirin carrier. Meantime, Korsmeyer-Peppas equation f{sub t}=kt{sup n} was employed to analyze the dissolution data in details. It is indicated that the bimodal mesopores are beneficial for unrestricted drug molecules diffusing and therefore lead to a higher loading and faster releasing than that of MCM-41. The results show that the aspirin delivery properties are influenced considerably by the mesoporous matrix, whereas the large pore of bimodal mesoporous silica is the key point for the improved controlled-release properties. - Graphical abstract: Loading (A) and release profiles (B) of aspirin in N-BMMs and N-MCM-41 indicated that BMMs have more drug loading capacity and faster release rate than that MCM-41. Highlights: > Bimodal mesoporous silicas (BMMs) and MCM-41 modified with amino group via post-treatment procedure. > Loading and release profiles of aspirin in modified BMMs and MCM-41. > Modified BMMs have more drug loading capacity and faster release rate than that modified MCM-41.

  12. Silica-based mesoporous nanoparticles for controlled drug delivery.

    PubMed

    Kwon, Sooyeon; Singh, Rajendra K; Perez, Roman A; Abou Neel, Ensanya A; Kim, Hae-Won; Chrzanowski, Wojciech

    2013-01-01

    Drug molecules with lack of specificity and solubility lead patients to take high doses of the drug to achieve sufficient therapeutic effects. This is a leading cause of adverse drug reactions, particularly for drugs with narrow therapeutic window or cytotoxic chemotherapeutics. To address these problems, there are various functional biocompatible drug carriers available in the market, which can deliver therapeutic agents to the target site in a controlled manner. Among the carriers developed thus far, mesoporous materials emerged as a promising candidate that can deliver a variety of drug molecules in a controllable and sustainable manner. In particular, mesoporous silica nanoparticles are widely used as a delivery reagent because silica possesses favourable chemical properties, thermal stability and biocompatibility. Currently, sol-gel-derived mesoporous silica nanoparticles in soft conditions are of main interest due to simplicity in production and modification and the capacity to maintain function of bioactive agents. The unique mesoporous structure of silica facilitates effective loading of drugs and their subsequent controlled release. The properties of mesopores, including pore size and porosity as well as the surface properties, can be altered depending on additives used to fabricate mesoporous silica nanoparticles. Active surface enables functionalisation to modify surface properties and link therapeutic molecules. The tuneable mesopore structure and modifiable surface of mesoporous silica nanoparticle allow incorporation of various classes of drug molecules and controlled delivery to the target sites. This review aims to present the state of knowledge of currently available drug delivery system and identify properties of an ideal drug carrier for specific application, focusing on mesoporous silica nanoparticles. PMID:24020012

  13. Silica-based mesoporous nanoparticles for controlled drug delivery

    PubMed Central

    Kwon, Sooyeon; Singh, Rajendra K; Perez, Roman A; Abou Neel, Ensanya A

    2013-01-01

    Drug molecules with lack of specificity and solubility lead patients to take high doses of the drug to achieve sufficient therapeutic effects. This is a leading cause of adverse drug reactions, particularly for drugs with narrow therapeutic window or cytotoxic chemotherapeutics. To address these problems, there are various functional biocompatible drug carriers available in the market, which can deliver therapeutic agents to the target site in a controlled manner. Among the carriers developed thus far, mesoporous materials emerged as a promising candidate that can deliver a variety of drug molecules in a controllable and sustainable manner. In particular, mesoporous silica nanoparticles are widely used as a delivery reagent because silica possesses favourable chemical properties, thermal stability and biocompatibility. Currently, sol-gel-derived mesoporous silica nanoparticles in soft conditions are of main interest due to simplicity in production and modification and the capacity to maintain function of bioactive agents. The unique mesoporous structure of silica facilitates effective loading of drugs and their subsequent controlled release. The properties of mesopores, including pore size and porosity as well as the surface properties, can be altered depending on additives used to fabricate mesoporous silica nanoparticles. Active surface enables functionalisation to modify surface properties and link therapeutic molecules. The tuneable mesopore structure and modifiable surface of mesoporous silica nanoparticle allow incorporation of various classes of drug molecules and controlled delivery to the target sites. This review aims to present the state of knowledge of currently available drug delivery system and identify properties of an ideal drug carrier for specific application, focusing on mesoporous silica nanoparticles. PMID:24020012

  14. Functionalized mesoporous silica materials for molsidomine adsorption: Thermodynamic study

    SciTech Connect

    Alyoshina, Nonna A.; Parfenyuk, Elena V.

    2013-09-15

    A series of unmodified and organically modified mesoporous silica materials was prepared. The unmodified mesoporous silica was synthesized via sol–gel synthesis in the presence of D-glucose as pore-forming agent. The functionalized by phenyl, aminopropyl and mercaptopropyl groups silica materials were prepared via grafting. The fabricated adsorbent materials were characterized by Fourier transform infrared spectroscopy (FTIR) analysis, N{sub 2} adsorption/desorption and elemental analysis methods. Then their adsorption properties for mesoionic dug molsidomine were investigated at 290–313 K and physiological pH value. Thermodynamic parameters of molsidomine adsorption on the synthesized materials have been calculated. The obtained results showed that the adsorption process of molsidomine on the phenyl modified silica is the most quantitatively and energetically favorable. The unmodified and mercaptopropyl modified silica materials exhibit significantly higher adsorption capacities and energies for molsidomine than the aminopropyl modified sample. The effects are discussed from the viewpoint of nature of specific interactions responsible for the adsorption. - Graphical abstract: Comparative analysis of the thermodynamic characteristics of molsidomine adsorption showed that the adsorption process on mesoporous silica materials is controlled by chemical nature of surface functional groups. Molsidomine adsorption on the phenyl modified silica is the most quantitatively and energetically favorable. Taking into account ambiguous nature of mesoionic compounds, it was found that molsidomine is rather aromatic than dipolar. Display Omitted - Highlights: • Unmodified and organically modified mesoporous silica materials were prepared. • Molsidomine adsorption on the silica materials was studied. • Phenyl modified silica shows the highest adsorption capacity and favorable energy. • Molsidomine exhibits the lowest affinity to aminopropyl modified silica.

  15. 11C-radiolabeling study of methanol decomposition on copper oxide modified mesoporous SBA-15 silica

    NASA Astrophysics Data System (ADS)

    Tsoncheva, Tanya; Sarkadi-Priboczki, Eva

    2011-05-01

    11C-radiolabeling technique is applied to investigate methanol decomposition on copper oxide modified SBA-15. Nitrogen physisorption, XRD, FTIR, UV-vis and TPR techniques are used for catalyst characterization. Selective adsorption coverage of the catalytic active sites with 11C- and 12C-methanol molecules is carried out and the products of their conversion are followed. The mechanism of methyl formate, methylal and CO 2 formation from methanol is discussed.

  16. Sample Desorption/Onization From Mesoporous Silica

    DOEpatents

    Iyer, Srinivas; Dattelbaum, Andrew M.

    2005-10-25

    Mesoporous silica is shown to be a sample holder for laser desorption/ionization of mass spectrometry. Supported mesoporous silica was prepared by coating an ethanolic silicate solution having a removable surfactant onto a substrate to produce a self-assembled, ordered, nanocomposite silica thin film. The surfactant was chosen to provide a desired pore size between about 1 nanometer diameter and 50 nanometers diameter. Removal of the surfactant resulted in a mesoporous silica thin film on the substrate. Samples having a molecular weight below 1000, such as C.sub.60 and tryptophan, were adsorbed onto and into the mesoporous silica thin film sample holder and analyzed using laser desorption/ionization mass spectrometry.

  17. APTES-modified mesoporous silicas as the carriers for poorly water-soluble drug. Modeling of diflunisal adsorption and release

    NASA Astrophysics Data System (ADS)

    Geszke-Moritz, Małgorzata; Moritz, Michał

    2016-04-01

    Four mesoporous siliceous materials such as SBA-16, SBA-15, PHTS and MCF functionalized with (3-aminopropyl)triethoxysilane were successfully prepared and applied as the carriers for poorly water-soluble drug diflunisal. Several techniques including nitrogen sorption analysis, XRD, TEM, FTIR and thermogravimetric analysis were employed to characterize mesoporous matrices. Adsorption isotherms were analyzed using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich models. In order to find the best-fit isotherm for each model, both linear and nonlinear regressions were carried out. The equilibrium data were best fitted by the Langmuir isotherm model revealing maximum adsorption capacity of 217.4 mg/g for aminopropyl group-modified SBA-15. The negative values of Gibbs free energy change indicated that the adsorption of diflunisal is a spontaneous process. Weibull release model was employed to describe the dissolution profile of diflunisal. At pH 4.5 all prepared mesoporous matrices exhibited the improvement of drug dissolution kinetics as compared to the dissolution rate of pure diflunisal.

  18. Non-destructively shattered mesoporous silica for protein drug delivery

    SciTech Connect

    Lei, Chenghong; Chen, Baowei; Li, Xiaolin; Qi, Wen N.; Liu, Jun

    2013-07-15

    Mesoporous silicas have been extensively used for entrapping small chemical molecules and biomacromolecules. We hypothesize that the loading density of biomacromlecules such as proteins in mesoporous silicas could be limited due to mesopore disorderness and depth because of some pore volume inaccessible. We innovatively shattered mesoporous silicas resulting in reduced particle sizes and improved intramesoporous structures in aqueous solution by a powerful sonication, where the mesoporous structures were still well maintained. The sonication-shattered mesoporous silicas can allow protein loading densities to be increased by more than 170%, demonstrating that significantly more mesoporous room of the silicas could become accessible for biomacromolecule loading after the sonication-shattering.

  19. Bimodal mesoporous silica with bottleneck pores.

    PubMed

    Reber, M J; Brühwiler, D

    2015-11-01

    Bimodal mesoporous silica consisting of two sets of well-defined mesopores is synthesized by a partial pseudomorphic transformation of an ordered mesoporous starting material (SBA-15 type). The introduction of a second set of smaller mesopores (MCM-41 type) establishes a pore system with bottlenecks that restricts the access to the core of the bimodal mesoporous silica particles. The particle size and shape of the starting material are retained, but micropores present in the starting material disappear during the transformation, leading to a true bimodal mesoporous product. A varying degree of transformation allows the adjustment of the pore volume contribution of the two mesopore domains. Information on the accessibility of the mesopores is obtained by the adsorption of fluorescence-labeled poly(amidoamine) dendrimers and imaging by confocal laser scanning microscopy. This information is correlated with nitrogen sorption data to provide insights regarding the spatial distribution of the two mesopore domains. The bimodal mesoporous materials are excellent model systems for the investigation of cavitation effects in nitrogen desorption isotherms. PMID:26399172

  20. Simultaneous Detection of Cadmium, Copper, and Lead using A Carbon Paste Electrode Modified with Carbamoylphosphonic Acid Self-Assembled Monolayer on Mesoporous Silica (SAMMS)

    SciTech Connect

    Yantasee, Wassana ); Lin, Yuehe ); Fryxell, Glen E. ); Busche, Brad J. )

    2004-01-30

    A new sensor was developed for simultaneous detection of cadmium (Cd2+), copper (Cu2+), and lead (Pb2+), based on the voltammetric response at a carbon paste electrode modified with carbamoylphosphonic acid (acetamide phosphonic acid) self-assembled monolayer on mesoporous silica (Ac-Phos SAMMS). The adsorptive stripping voltammetry technique involves preconcentration of the metal ions onto Ac-Phos SAMMS under an open circuit, then electrolysis of the preconcentrated species, followed by a square wave potential sweep towards positive values. Factors affecting the preconcentration process were investigated. The voltammetric responses increased linearly with the preconcentration time from 1 to 30 minutes or with metal ion concentrations ranging from 10 to 200 ppb. The responses also evolved in the same fashion as adsorption isotherm in the pH range of 2-6. The metal detection limits were 10 ppb after 2 minutes preconcentration and improved to 0.5 ppb after 20 minutes preconcentration.

  1. Design and functionalization of photocatalytic systems within mesoporous silica.

    PubMed

    Qian, Xufang; Fuku, Kojirou; Kuwahara, Yasutaka; Kamegawa, Takashi; Mori, Kohsuke; Yamashita, Hiromi

    2014-06-01

    In the past decades, various photocatalysts such as TiO2, transition-metal-oxide moieties within cavities and frameworks, or metal complexes have attracted considerable attention in light-excited catalytic processes. Owing to high surface areas, transparency to UV and visible light as well as easily modified surfaces, mesoporous silica-based materials have been widely used as excellent hosts for designing efficient photocatalytic systems under the background of environmental remediation and solar-energy utilization. This Minireview mainly focuses on the surface-chemistry engineering of TiO2/mesoporous silica photocatalytic systems and fabrication of binary oxides and nanocatalysts in mesoporous single-site-photocatalyst frameworks. Recently, metallic nanostructures with localized surface plasmon resonance (LSPR) have been widely studied in catalytic applications harvesting light irradiation. Accordingly, silver and gold nanostructures confined in mesoporous silica and their corresponding catalytic activity enhanced by the LSPR effect will be introduced. In addition, the integration of metal complexes within mesoporous silica materials for the construction of functional inorganic-organic supramolecular photocatalysts will be briefly described. PMID:24828540

  2. Cationic Polymer Modified Mesoporous Silica Nanoparticles for Targeted SiRNA Delivery to HER2+ Breast Cancer

    PubMed Central

    Ngamcherdtrakul, Worapol; Morry, Jingga; Gu, Shenda; Castro, David J.; Goodyear, Shaun M.; Sangvanich, Thanapon; Reda, Moataz M.; Lee, Richard; Mihelic, Samuel A.; Beckman, Brandon L.; Hu, Zhi; Gray, Joe W.; Yantasee, Wassana

    2015-01-01

    In vivo delivery of siRNAs designed to inhibit genes important in cancer and other diseases continues to be an important biomedical goal. We now describe a new nanoparticle construct that has been engineered for efficient delivery of siRNA to tumors. The construct is comprised of a 47-nm mesoporous silica nanoparticle (MSNP) core coated with a cross-linked PEI-PEG copolymer, carrying siRNA against the HER2 oncogene, and coupled to the anti-HER2 monoclonal antibody (trastuzumab). The construct has been engineered to increase siRNA blood half-life, enhance tumor-specific cellular uptake, and maximize siRNA knockdown efficacy. The optimized anti-HER2-nanoparticles produced apoptotic death in HER2 positive (HER2+) breast cancer cells grown in vitro, but not in HER2 negative (HER2−) cells. One dose of the siHER2-nanoparticles reduced HER2 protein levels by 60% in trastuzumab-resistant HCC1954 xenografts. Multiple doses administered intravenously over 3 weeks significantly inhibited tumor growth (p < 0.004). The siHER2-nanoparticles have an excellent safety profile in terms of blood compatibility and low cytokine induction, when exposed to human peripheral blood mononuclear cells. The construct can be produced with high batch-to-batch reproducibility and the production methods are suitable for large-scale production. These results suggest that this siHER2-nanoparticle is ready for clinical evaluation. PMID:26097445

  3. Enhanced accumulation and visible light-assisted degradation of azo dyes in poly(allylamine hydrochloride)-modified mesoporous silica spheres

    SciTech Connect

    Tao Xia Liu Bing; Hou Qian; Xu Hui; Chen Jianfeng

    2009-02-04

    A new route for the economic and efficient treatment of azo dye pollutants is reported, in which surface-modified organic-inorganic hybrid mesoporous silica (MS) spheres were chosen as microreactors for the accumulation and subsequent photodegradation of pollutants in defined regions. The surface-modified silica materials were prepared by anchoring the polycationic species such as poly(allylamine hydrochloride) on MS spheres via a simple wet impregnation method. The as-synthesized spheres with well-defined porous structures exhibited 15 times of accumulating capacity for orange II and Congo red compared to that of the pure MS spheres. Diffuse reflectance UV-vis spectroscopy and confocal laser scanning microscopy demonstrated that the accumulated orange II and CR in defined MS spheres were rapidly degraded in the presence of Fenton reagent under visible radiation. Kinetics analysis in recycling degradation showed that the as-synthesized materials might be utilized as environment-friendly preconcentrators/microreactors for the remediation of dye wastewater.

  4. Antibacterial performance of nanocrystallined titania confined in mesoporous silica nanotubes.

    PubMed

    Cendrowski, Krzysztof; Peruzynska, Magdalena; Markowska-Szczupak, Agata; Chen, Xuecheng; Wajda, Anna; Lapczuk, Joanna; Kurzawski, Mateusz; Kalenczuk, Ryszard J; Drozdzik, Marek; Mijowska, Ewa

    2014-06-01

    In this paper, we study synthesis and characteristics of mesoporous silica nanotubes modified by titanium dioxide, as well as their antimicrobial properties and influence on mitochondrial activity of mouse fibroblast L929. Nanocrystalized titania is confined in mesopores of silica nanotubes and its light activated antibacterial response is revealed. The analysis of the antibacterial effect on Escherichia coli. (ATCC 25922) shows strong enhancement during irradiation with the artificial visible and ultraviolet light in respect to the commercial catalyst and control sample free from the nanomaterials. In darkness, the mesoporous silica/titania nanostructures exhibited antibacterial activity dependent on the stirring speed of the suspension containing nanomaterials. Obtained micrograph proved internalization of the sample into the microorganism trough the cell membrane. The analysis of the mitochondrial activity and amount of lactate dehydrogenase released from mouse fibroblast cells L929 in the presence of the sample were determined with LDH and WST1 assays, respectively. The synthesized silica/titania antibacterial agent also exhibits pronounced photoinduced inactivation of the bacterial growth under the artificial visible and UV light irritation in respect to the commercial catalyst. Additionally, mesoporous silica/titania nanotubes were characterized in details by means of high resolution transmission electron microscopy (HR-TEM), XRD and BET Isotherm. PMID:24676537

  5. Eu3+/Sm3+ hybrids based with 8-hydroxybenz[de]anthracen-7-one organically modified mesoporous silica SBA-15/16

    NASA Astrophysics Data System (ADS)

    Gu, Yan-Jing; Yan, Bing

    2015-12-01

    A series of organic-inorganic hybrid materials were prepared by linking lanthanide (Eu3+, Sm3+) complexes to mesoporous SBA-15/SBA-16 through 8-hydroxybenz[de]anthracen-7-one modified silane (HBA-Si) as linker. The physical characterizations of these hybrids revealed that they all have high surface area, uniformity in mesostructure. The luminescence properties of these covalently bonded materials (denoted as Ln(HBA-SBA-15)3phen and Ln(HBA-SBA-16)3phen) were compared with ternary complexes (Ln(HBA)3phen) (Ln = Eu, Sm). Eu(HBA-SBA-15(16))3phen hybrids display better thermal stability, whose luminescent lifetimes and quantum efficiencies were matchable with those of Eu(HBA)3phen complex in spite of its much lower effective condensation of Eu3+ species. In addition, the luminescent performance of functionalized SBA-15 hybrids was more favorable than that of functionalized SBA-16 hybrids, revealing that SBA-15 was a better host material for lanthanide complex than mesoporous silica SBA-16.

  6. Carbon Nanotube Synthesis Using Mesoporous Silica Templates

    SciTech Connect

    Zheng, Feng; Liang, Liang; Gao, Yufei; Sukamto, Johanes H.; Aardahl, Chris L.

    2002-07-01

    Well-aligned carbon nanotubes (CNTs) were grown on mesoporous silica films by chemical vapor deposition (CVD). Ethylene was used as the carbon source and CVD was performed at 1023 K and atmospheric pressure. The films were doped with Fe during gelation, and three different structure directing agents were used for mesoporous silica synthesis: polyoxyethylene (10) cetyl ether (C16EO10), Pluronic tri-block copolymer (P123), and cetyltriethylammonium chloride (CTAC). A high degree of CNT alignment on C16EO10-mesoporous silica films was produced at Fe:Si molar ratio of 1.80. Similar alignment of CNTs was achieved on the other two types of films but on CTAC-mesoporous silica films, CNTs only grew parallel to the substrate surface from the cracks in the films because of the in-plane arrangement of the mesopores in such films. Considerable progress has been made in producing multi-walled carbon nanotubes (CNTs) by catalytic CVD techniques. If CNTs are to be integrated into certain useful devices, it is critical to be able to grow highly aligned arrays of CNTs with narrow size distribution and at specific locations on a substrate. Long-range alignment normal to the substrate results from steric crowding if the initial catalyst sites are sufficiently dense. Alignment may be improved with better control of the density of catalytic sites by means of a template of appropriate pore structure. The confinement of CNTs by the pores during the initial growth may also help align CNTs.

  7. Drug release from ordered mesoporous silicas.

    PubMed

    Doadrio, Antonio L; Salinas, Antonio J; Sánchez-Montero, José M; Vallet-Regí, M

    2015-01-01

    The state-of-the-art in the investigation of drugs release from Silica-based ordered Mesoporous Materials (SMMs) is reviewed. First, the SMM systems used like host matrixes are described. Then, the model drugs studied until now, including their pharmacological action, structure and the mesoporous matrix employed for each drug, are comprehensively listed. Next, the factors influencing the release of drugs from SMMs and the strategies used to control the drug delivery, specially the chemical functionalization of the silica surface, are discussed. In addition, how all these factors were gathered in a kinetic equation that describes the drug release from the mesoporous matrixes is explained. The new application of molecular modeling and docking in the investigation of the drug delivery mechanisms from SMMs is also presented. Finally, the new approaches under investigation in this field are mentioned including the design of smart stimuli-responsive materials and other recent proposals for a future investigation. PMID:26549760

  8. Facile synthesis of Cu(2+)-modified mesoporous silica-coated magnetic graphene composite for enrichment of microcystin-LR followed by mass spectrometry analysis.

    PubMed

    Liu, Shasha; Deng, Chunhui; Zhang, Xiangmin

    2016-07-01

    MCs is a group of potent hepatotoxic peptides produced by cyanobacterial in eutrophic water, among which microcystin-LR is the most abundant and toxic. Long-time accumulation of even trace dosage from drinking water would cause significantly hepatic injury to animal and humans. Here we reported a novel Cu(2+)-modified mesoporous silica coated magnetic graphene composite (magG@mSiO2@-Cu(2+)) through mild sol-gel process and surface modification. Next, the composites were successfully applied for enrichment and separation of microcystin-LR followed by MALDI-TOF MS analysis based on the virtues of excellent hydrophilicity, high surface area (261cm(2)g(-1)), sensitively magnetic separation property, accessible porosity (3.10nm) and large amount of modified Cu(2+) ions. Even performed in a lower concentration (0.5μg/L), at which microcystin-LR could not be detected directly, after treatment with the composites the S/N ratio could appear to be 82.93. Furthermore, the novel composites also exhibited high enrichment efficiency in real water sample. It provided a sensitive and efficient technique for enrichment and detection of microcystin-LR and developed a potent method for separation of pollutant in contaminated water. PMID:27154664

  9. Mesoporous silica nanoparticles for active corrosion protection.

    PubMed

    Borisova, Dimitriya; Möhwald, Helmuth; Shchukin, Dmitry G

    2011-03-22

    This work presents the synthesis of monodisperse, mesoporous silica nanoparticles and their application as nanocontainers loaded with corrosion inhibitor (1H-benzotriazole (BTA)) and embedded in hybrid SiOx/ZrOx sol-gel coating for the corrosion protection of aluminum alloy. The developed porous system of mechanically stable silica nanoparticles exhibits high surface area (∼1000 m2·g(-1)), narrow pore size distribution (d∼3 nm), and large pore volume (∼1 mL·g(-1)). As a result, a sufficiently high uptake and storage of the corrosion inhibitor in the mesoporous nanocontainers was achieved. The successful embedding and homogeneous distribution of the BTA-loaded monodisperse silica nanocontainers in the passive anticorrosive SiOx/ZrOx film improve the wet corrosion resistance of the aluminum alloy AA2024 in 0.1 M sodium chloride solution. The enhanced corrosion protection of this newly developed active system in comparison to the passive sol-gel coating was observed during a simulated corrosion process by the scanning vibrating electrode technique (SVET). These results, as well as the controlled pH-dependent release of BTA from the mesoporous silica nanocontainers without additional polyelectrolyte shell, suggest an inhibitor release triggered by the corrosion process leading to a self-healing effect. PMID:21344888

  10. A highly ordered cubic mesoporous silica/graphene nanocomposite.

    PubMed

    Lee, Chang-Wook; Roh, Kwang Chul; Kim, Kwang-Bum

    2013-10-21

    A highly ordered cubic mesoporous silica (KIT-6)/graphene nanocomposite and 2D KIT-6 nanoflakes were synthesized using a novel synthesis methodology. The non-ionic triblock copolymer, P123, played a dual role as a structure-directing agent in the formation of the cubic mesoporous structure and as a cross-linking agent between mesoporous silica and graphene. The prepared (KIT-6)/graphene nanocomposite could act as a template for the preparation of mesoporous material/graphene nanocomposites. PMID:24057016

  11. Sequential Enrichment with Titania-coated Magnetic Mesoporous Hollow Silica Microspheres and Zirconium Arsenate-modified Magnetic Nanoparticles for the Study of Phosphoproteome of HL60 Cells

    PubMed Central

    Yu, Qiong-Wei; Li, Xiao-Shui; Xiao, Yongsheng; Guo, Lei; Zhang, Fan; Cai, Qian; Feng, Yu-Qi; Yuan, Bi-Feng; Wang, Yinsheng

    2014-01-01

    As one of the most important types of post-translational modifications, reversible phosphorylation of proteins plays crucial roles in a large number of biological processes. However, owing to the relatively low abundance and dynamic nature of phosphorylation and the presence of the unphosphorylated peptides in large excess, phosphopeptide enrichment is indispensable in large-scale phosphoproteomic analysis. Metal oxides including titanium dioxide have become prominent affinity materials to enrich phosphopeptides prior to their analysis using liquid chromatography-mass spectrometry (LC-MS). In the current study, we established a novel strategy, which encompassed strong cation exchange chromatography, sequential enrichment of phosphopeptides using titania-coated magnetic mesoporous hollow silica microspheres (TiO2/MHMSS) and zirconium arsenate-modified magnetic nanoparticles (ZrAs-Fe3O4@SiO2), and LC-MS/MS analysis, for the proteome-wide identification of phosphosites of proteins in HL60 cells. In total, we were able to identify 11579 unique phosphorylation sites in 3432 unique proteins. Additionally, our results suggested that TiO2/MHMSS and ZrAs-Fe3O4@SiO2 are complementary in phosphopeptide enrichment, where the two types of materials displayed preferential binding of peptides carrying multiple and single phosphorylation sites, respectively. PMID:25262027

  12. Modified mesoporous silica materials for on-line separation and preconcentration of hexavalent chromium using a microcolumn coupled with flame atomic absorption spectrometry.

    PubMed

    Wang, Zheng; Fang, Dong-Mei; Li, Qing; Zhang, Ling-Xia; Qian, Rong; Zhu, Yan; Qu, Hai-Yun; Du, Yi-Ping

    2012-05-01

    A modified SBA-15 mesoporous silica material NH(2)-SBA-15 was synthesized successfully by grafting γ-aminopropyl-triethoxysilane. The material was characterized using transmission electron microscopy (TEM) and Fourier transform infrared/Raman (FT-IR/Raman) spectroscopy, and used for the first time in a flow injection on-line solid phase extraction (SPE) coupled with flame atomic absorption spectrometry (FAAS) to detect trace Cr (VI). Effective sorption of Cr (VI) was achieved at pH 2.0 with no interference from Cr (III) and other ions and 0.5 mol L(-1) NH(3)·H(2)O solution was found optimal for the complete elution of Cr (VI). An enrichment factor of 44 and was achieved under optimized experimental conditions at a sample loading of 2.0 mL min(-1) sample loading (300 s) and an elution flow rate of 2.0 mL min(-1) (24s). The precision of the 11 replicate Cr (VI) measurements was 2.1% at the 100 μg L(-1) level with a detection limit of 0.2 μg L(-1) (3s, n=10) using the FAAS. The developed method was successfully applied to trace chromium determination in waste water. The accuracy was validated using a certified reference material of riverine water (GBW08607). PMID:22502615

  13. Synthesis of periodic mesoporous silica thin films

    SciTech Connect

    Anderson, M.T.; Martin, J.E.; Odinek, J.G.; Newcomer, P.

    1996-06-01

    We have synthesized periodic mesoporous silica thin films from homogeneous solutions. To synthesize the films, a thin layer of a pH 7 micellar coating solution that contains TMOS (tetramethoxysilane) is dip or spin-coated onto Si wafers, borosilicate glass, or quartz substrates. NH3 gas is diffused into the solution and causes rapid hydrolysis and condensation of the TMOS and the formation of periodic mesoporous thin films within 10 seconds. Combination of homogenous solutions and rapid product formation maximizes the concentration of the desired product and provides a controlled, predictable microstructure. The films have been made continuous and crack-free by optimizing initial silica concentration and film thickness. The films are being evaluated as high surface area, size-selective coatings for surface acoustic wave (SAW) sensors.

  14. Electrical Relaxation in ULTEM® and ULTEM® Containing Mesoporous Silica

    NASA Astrophysics Data System (ADS)

    Turo, Andrew; Edmondson, Charles E.; Lomax, Joseph F.; Bendler, John T.; Fontanella, John J.; Wintersgill, Mary C.

    2008-08-01

    Mesoporous silica has been added to Ultem® 1000 polyetherimide using solution casting. The mesoporous silica that was added was either uncoated or coated with polystyrene. Audio frequency dielectric relaxation studies were then carried out over the temperature range 5.5 to 550 K. Several interesting results were obtained. First, the uncoated mesoporous silica caused essentially no change in the relaxation spectrum of pure Ultem®. The polystyrene coated mesoporous silica caused rather large changes. The most striking example is the introduction of a new relaxation. This relaxation occurs at about 150 K and 1000 Hz as showing in fig. 1 via the open circles.

  15. Adsorption behavior of natural anthocyanin dye on mesoporous silica

    NASA Astrophysics Data System (ADS)

    Kohno, Yoshiumi; Haga, Eriko; Yoda, Keiko; Shibata, Masashi; Fukuhara, Choji; Tomita, Yasumasa; Maeda, Yasuhisa; Kobayashi, Kenkichiro

    2014-01-01

    Because of its non-toxicity, naturally occurring anthocyanin is potentially suitable as a colorant for foods and cosmetics. To the wider use of the anthocyanin, the immobilization on the inorganic host for an easy handling as well as the improvement of the stability is required. This study is focused on the adsorption of significant amount of the natural anthocyanin dye onto mesoporous silica, and on the stability enhancement of the anthocyanin by the complexation. The anthocyanin has successfully been adsorbed on the HMS type mesoporous silica containing small amount of aluminum. The amount of the adsorbed anthocyanin has been increased by modifying the pore wall with n-propyl group to make the silica surface hydrophobic. The light fastness of the adsorbed anthocyanin has been improved by making the composite with the HMS samples containing aluminum, although the degree of the improvement is not so large. It has been proposed that incorporation of the anthocyanin molecule deep inside the mesopore is required for the further enhancement of the stability.

  16. Transport properties of fast proton conducting mesoporous silica xerogels

    NASA Astrophysics Data System (ADS)

    Colomer, M. T.; Rubio, F.; Jurado, J. R.

    Mesoporous acid-free silica xerogels exhibiting a proton conductivity of 2.0 × 10 -2 S cm -1 at 80 °C and 81% RH is reported for the first time. The proton conductivity values, lower cost and higher hydrophilicity of mesoporous silica xerogels make them potential substitutes for Nafion membranes in proton exchange membranes fuel cells (PEMFCs).

  17. Biodegradation-tunable mesoporous silica nanorods for controlled drug delivery.

    PubMed

    Park, Sung Bum; Joo, Young-Ho; Kim, Hyunryung; Ryu, WonHyoung; Park, Yong-il

    2015-05-01

    Mesoporous silica in the forms of micro- or nanoparticles showed great potentials in the field of controlled drug delivery. However, for precision control of drug release from mesoporous silica-based delivery systems, it is critical to control the rate of biodegradation. Thus, in this study, we demonstrate a simple and robust method to fabricate "biodegradation-tunable" mesoporous silica nanorods based on capillary wetting of anodic aluminum oxide (AAO) template with an aqueous alkoxide precursor solution. The porosity and nanostructure of silica nanorods were conveniently controlled by adjusting the water/alkoxide molar ratio of precursor solutions, heat-treatment temperature, and Na addition. The porosity and biodegradation kinetics of the fabricated mesoporous nanorods were analyzed using N2 adsorption/desorption isotherm, TGA, DTA, and XRD. Finally, the performance of the mesoporous silica nanorods as drug delivery carrier was demonstrated with initial burst and subsequent "zero-order" release of anti-cancer drug, doxorubicin. PMID:25746247

  18. Fluorescence properties of dye doped mesoporous silica

    NASA Astrophysics Data System (ADS)

    Carbonaro, Carlo M.; Corpino, Riccardo; Ricci, Pier Carlo; Chiriu, Daniele; Cannas, Carla

    2014-10-01

    In this paper we present a review of the main results we obtained studying the emission properties of organic-inorganic hybrids obtained combining mesoporous silica and Xantene dyes, in particular the standard referenc Rhodamine 6G. The purpose of the review is to show the possibility to efficiently "dope" the transparent inorganic porous matrix to obtain promising systems for photonic and biomedical applications. The strategies to solve the concentration effect and the leaching phenomenon are discussed within the framework of the single exciton theory.

  19. Mesoporous silica-titania composed materials.

    PubMed

    Messina, Paula V; Morini, Marcela A; Sierra, María B; Schulz, Pablo C

    2006-08-01

    Titania mesosized particles were obtained by TiCl4 hydrolysis in Aerosol OT/water/n-hexane microemulsion. These particles were incorporated in surfactant templated silica mesoporous materials of MCM-41 and MCM-50 structures. Results depended on the surfactant: hexadecyltrimethylammonium bromide templated materials retained the honeycomb structure with small modifications in their characteristics. The dodecyltrimethylammonium bromide templated material changed from honeycomb to lamellar structure when the titania particles were included, with dramatic changes in the structure characteristics. The didodecyldimethylammonium bromide templated lamellar structure was retained after TIO2 inclusion, with a slight increase in the specific area, pore diameter and pore walls thickness. PMID:16600274

  20. Fluorescence properties of dye doped mesoporous silica

    SciTech Connect

    Carbonaro, Carlo M. Corpino, Riccardo Ricci, Pier Carlo Chiriu, Daniele; Cannas, Carla

    2014-10-21

    In this paper we present a review of the main results we obtained studying the emission properties of organic-inorganic hybrids obtained combining mesoporous silica and Xantene dyes, in particular the standard reference Rhodamine 6G. The purpose of the review is to show the possibility to efficiently 'dope' the transparent inorganic porous matrix to obtain promising systems for photonic and biomedical applications. The strategies to solve the concentration effect and the leaching phenomenon are discussed within the framework of the single exciton theory.

  1. Mesoporous fluorocarbon-modified silica aerogel membranes enabling long-term continuous CO2 capture with large absorption flux enhancements.

    PubMed

    Lin, Yi-Feng; Chen, Chien-Hua; Tung, Kuo-Lun; Wei, Te-Yu; Lu, Shih-Yuan; Chang, Kai-Shiun

    2013-03-01

    The use of a membrane contactor combined with a hydrophobic porous membrane and an amine absorbent has attracted considerable attention for the capture of CO2 because of its extensive use, low operational costs, and low energy consumption. The hydrophobic porous membrane interface prevents the passage of the amine absorbent but allows the penetration of CO2 molecules that are captured by the amine absorbent. Herein, highly porous SiO2 aerogels modified with hydrophobic fluorocarbon functional groups (CF3 ) were successfully coated onto a macroporous Al2 O3 membrane; their performance in a membrane contactor for CO2 absorption is discussed. The SiO2 aerogel membrane modified with CF3 functional groups exhibits the highest CO2 absorption flux and can be continuously operated for CO2 absorption for extended periods of time. This study suggests that a SiO2 aerogel membrane modified with CF3 functional groups could potentially be used in a membrane contactor for CO2 absorption. Also, the resulting hydrophobic SiO2 aerogel membrane contactor is a promising technology for large-scale CO2 absorption during the post-combustion process in power plants. PMID:23417984

  2. Gated Silica Mesoporous Materials in Sensing Applications

    PubMed Central

    Sancenón, Félix; Pascual, Lluís; Oroval, Mar; Aznar, Elena; Martínez-Máñez, Ramón

    2015-01-01

    Silica mesoporous supports (SMSs) have a large specific surface area and volume and are particularly exciting vehicles for delivery applications. Such container-like structures can be loaded with numerous different chemical substances, such as drugs and reporters. Gated systems also contain addressable functions at openings of voids, and cargo delivery can be controlled on-command using chemical, biochemical or physical stimuli. Many of these gated SMSs have been applied for drug delivery. However, fewer examples of their use in sensing protocols have been reported. The approach of applying SMSs in sensing uses another concept—that of loading pores with a reporter and designing a capping mechanism that is selectively opened in the presence of a target analyte, which results in the delivery of the reporter. According to this concept, we provide herein a complete compilation of published examples of probes based on the use of capped SMSs for sensing. Examples for the detection of anions, cations, small molecules and biomolecules are provided. The diverse range of gated silica mesoporous materials presented here highlights their usefulness in recognition protocols. PMID:26491626

  3. Gated Silica Mesoporous Materials in Sensing Applications.

    PubMed

    Sancenón, Félix; Pascual, Lluís; Oroval, Mar; Aznar, Elena; Martínez-Máñez, Ramón

    2015-08-01

    Silica mesoporous supports (SMSs) have a large specific surface area and volume and are particularly exciting vehicles for delivery applications. Such container-like structures can be loaded with numerous different chemical substances, such as drugs and reporters. Gated systems also contain addressable functions at openings of voids, and cargo delivery can be controlled on-command using chemical, biochemical or physical stimuli. Many of these gated SMSs have been applied for drug delivery. However, fewer examples of their use in sensing protocols have been reported. The approach of applying SMSs in sensing uses another concept-that of loading pores with a reporter and designing a capping mechanism that is selectively opened in the presence of a target analyte, which results in the delivery of the reporter. According to this concept, we provide herein a complete compilation of published examples of probes based on the use of capped SMSs for sensing. Examples for the detection of anions, cations, small molecules and biomolecules are provided. The diverse range of gated silica mesoporous materials presented here highlights their usefulness in recognition protocols. PMID:26491626

  4. Distributions of noble metal Pd and Pt in mesoporous silica

    NASA Astrophysics Data System (ADS)

    Arbiol, J.; Cabot, A.; Morante, J. R.; Chen, Fanglin; Liu, Meilin

    2002-10-01

    Mesoporous silica nanostructures have been synthesized and loaded with Pd and Pt catalytic noble metals. It is found that Pd forms small nanoclusters (3-5 nm) on the surface of the mesoporous structure whereas Pt impregnation results in the inclusion of Pt nanostructures within the silica hexagonal pores (from nanoclusters to nanowires). It is observed that these materials have high catalytic properties for CO-CH4 combustion, even in a thick film form. In particular, results indicate that the Pt and Pd dispersed in mesoporous silica are catalytically active as a selective filter for gas sensors.

  5. Synthesis and Characterization of Mesoporous Silica Functionalized with Calix[4]arene Derivatives

    PubMed Central

    Alahmadi, Sana M.; Mohamad, Sharifah; Maah, Mohd Jamil

    2012-01-01

    This work reports a new method to covalently attach calix[4]arene derivatives onto MCM-41, using a diisocyanate as a linker. The modified mesoporous silicates were characterized by fourier transform infrared spectroscopy (FTIR), thermal analysis (TGA) and elemental analysis. The FTIR spectra and TGA analysis verified that the calix[4]arene derivates are covalently attached to the mesoporous silica. The preservation of the MCM-41 channel system was checked by X-ray diffraction and nitrogen adsorption analysis. PMID:23202977

  6. Incorporation of anti-inflammatory agent into mesoporous silica.

    PubMed

    Braz, Wilson Rodrigues; Rocha, Natállia Lamec; de Faria, Emerson H; Silva, Márcio L A E; Ciuffi, Katia J; Tavares, Denise C; Furtado, Ricardo Andrade; Rocha, Lucas A; Nassar, Eduardo J

    2016-09-23

    The unique properties of macroporous, mesoporous, and microporous systems, including their ability to accommodate molecules of different sizes inside their pores and to act as drug delivery systems, have been the object of extensive studies. In this work, mesoporous silica with hexagonal structure was obtained by template synthesis via the sol-gel process. The resulting material was used as support to accommodate the anti-inflammatory agent indomethacin. The alkaline route was used to prepare the mesoporous silica; cetyltrimethylammonium bromide was employed as porogenic agent. The silica particles were functionalized with 3-aminopropyltriethoxysilane alkoxide (APTES) by the sol-gel post-synthesis method. Indomethacin was incorporated into the silica functionalized with APTES and into non-functionalized silica. The resulting systems were characterized by x-ray diffraction (XRD), specific area, infrared spectroscopy, and thermal analyses (TGA). XRD attested to formation of mesoporous silica with hexagonal structure. This structure remained after silica functionalization with APTES and incorporation of indomethacin. Typical infrared spectroscopy vibrations and organic material decomposition during TGA confirmed silica functionalization and drug incorporation. The specific surface area and pore volume of the functionalized material incorporated with indomethacin decreased as compared with the specific surface area and pore volume of the non-functionalized silica containing no drug, suggesting both the functionalizing agent and the drug were present in the silica. Cytotoxicity tests conducted on normal fibroblasts (GM0479A) cells attested that the silica matrix containing indomethacin was less toxic than the free drug. PMID:27533108

  7. Grafting Sulfated Zirconia on Mesoporous Silica

    SciTech Connect

    Wang, Yong; Lee, Kwan Young; Choi, Saemin; Liu, Jun; Wang, Li Q.; Peden, Charles HF

    2007-06-01

    Sulfated zirconia has received considerable attention as a potential solid acid catalyst in recent years. In this paper, the preparation and properties of acid catalysts obtained by grafting ziconia with atomic precision on MCM-41 mesoporous silica were studied. TEM and potential titration characterizations revealed that ZrO2/MCM-41 with monolayer coverage can be obtained using this grafting technique. Sulfated ZrO2/MCM-41 exhibits improved thermal stability than that of bulk sulfated zirconia, as evidenced by temperature programmed characterizations and XRD analysis. Temperature programmed reaction of isopropanol was used to evaluate the acidity of sulfated ZrO2/MCM-41. It was found that the acid strength of sulfated ZrO2/MCM-41 with monolayer coverage is weaker than bulk sulfated zirconia but stronger than SiO2-Al2O3, a common strong acid catalyst.

  8. A highly ordered cubic mesoporous silica/graphene nanocomposite

    NASA Astrophysics Data System (ADS)

    Lee, Chang-Wook; Roh, Kwang Chul; Kim, Kwang-Bum

    2013-09-01

    A highly ordered cubic mesoporous silica (KIT-6)/graphene nanocomposite and 2D KIT-6 nanoflakes were synthesized using a novel synthesis methodology. The non-ionic triblock copolymer, P123, played a dual role as a structure-directing agent in the formation of the cubic mesoporous structure and as a cross-linking agent between mesoporous silica and graphene. The prepared (KIT-6)/graphene nanocomposite could act as a template for the preparation of mesoporous material/graphene nanocomposites.A highly ordered cubic mesoporous silica (KIT-6)/graphene nanocomposite and 2D KIT-6 nanoflakes were synthesized using a novel synthesis methodology. The non-ionic triblock copolymer, P123, played a dual role as a structure-directing agent in the formation of the cubic mesoporous structure and as a cross-linking agent between mesoporous silica and graphene. The prepared (KIT-6)/graphene nanocomposite could act as a template for the preparation of mesoporous material/graphene nanocomposites. Electronic supplementary information (ESI) available: S1: TEM images of disordered mesoporous silica/graphene nanocomposite; S2: TEM images of KIT-6/GO nanocomposite; S3: Thermogravimetric analysis of KIT-6/GO and KG-400-700; S4: SEM and TEM images of KIT-6; S5: Low angle XRD, Raman spectra, N2 adsorption isotherms, pore size distribution and photographic images of the prepared samples; S6: TEM image and N2 adsorption isotherms of mesoporous carbon/graphene nanocomposite; S7: XPS C1s spectra of the prepared samples. See DOI: 10.1039/c3nr03108j

  9. Fluorous modified magnetic mesoporous silica composites-incorporated fluorous solid-phase extraction for the specific enrichment of N-linked glycans with simultaneous exclusion of proteins.

    PubMed

    Zhao, Man; Deng, Chunhui

    2016-10-01

    Taking advantage of fluorine-fluorine interactions, fluorous solid-phase extraction (FSPE) is emerging as a novel approach in proteomics research. Notably, silica gel bound with perfluoroalkyl groups was applied to the FSPE of N-linked glycans. Based on previous studies, mesoporous silica coated magnetic nanoparticles bound with perfluoroalkyl groups were synthesized for the specific enrichment of N-linked glycans in this study. The magnetic nanoparticles-incorporated FSPE strategy successfully identified 22 N-linked glycans from the OVA digest with a concentration of 0.5μg/μL, and achieved a detection limit of 5ng/μL (with 16 N-linked glycans identified). It also showed good day-to-day reproducibility. Its selectivity towards BSA protein is 1:200 (molar ratio), showing excellent size-exclusion effect. In addition, the present method proved to be effective for the analysis of the human serum digest, opening up new prospect for the identification of glycans and proteins with other post-translational modifications in biological environment. PMID:27474286

  10. Zirconia-silica based mesoporous desulfurization adsorbents

    NASA Astrophysics Data System (ADS)

    Palomino, Jessica M.; Tran, Dat T.; Kareh, Ana R.; Miller, Christopher A.; Gardner, Joshua M. V.; Dong, Hong; Oliver, Scott R. J.

    2015-03-01

    We report a series of mesoporous silicate sorbent materials templated by long-chain primary alkylamines that display record level of desulfurization of the jet fuel JP-8. Pure silica frameworks and those with a Si:Zr synthesis molar ratio ranging from 44:1 to 11:1 were investigated. The optimum sorbent was identified as dodecylamine-templated silica-zirconia synthesized from a gel with Si:Zr molar ratio of 15:1. With an optimized silver loading of 11 wt.%, a saturation adsorption capacity of 39.4 mgS g-1 and a silver efficiency of 1.21 molS mol Ag-1 were observed for JP-8. This sorbent displayed exceptional regenerability, maintaining 86% of its initial capacity in model fuel after solvent regeneration with diethyl ether. Low-cost, portable and reusable sorbents for the desulfurization of JP-8 jet fuel are needed to make solid oxide fuel cells (SOFCs) a reality for military power needs. SOFCs require ultra-low sulfur content fuel, which traditional desulfurization methods cannot achieve.

  11. Chemical Insight into the Adsorption of Chromium(III) on Iron Oxide/Mesoporous Silica Nanocomposites.

    PubMed

    Egodawatte, Shani; Datt, Ashish; Burns, Eric A; Larsen, Sarah C

    2015-07-14

    Magnetic iron oxide/mesoporous silica nanocomposites consisting of iron oxide nanoparticles embedded within mesoporous silica (MCM-41) and modified with aminopropyl functional groups were prepared for application to Cr(III) adsorption followed by magnetic recovery of the nanocomposite materials from aqueous solution. The composite materials were extensively characterized using physicochemical techniques, such as powder X-ray diffraction, thermogravimetric and elemental analysis, nitrogen adsorption, and zeta potential measurements. For aqueous Cr(III) at pH 5.4, the iron oxide/mesoporous silica nanocomposite exhibited a superior equilibrium adsorption capacity of 0.71 mmol/g, relative to 0.17 mmol/g for unmodified mesoporous silica. The aminopropyl-functionalized iron oxide/mesoporous silica nanocomposites displayed an equilibrium adsorption capacity of 2.08 mmol/g, the highest adsorption capacity for Cr(III) of all the materials evaluated in this study. Energy-dispersive spectroscopy (EDS) with transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) experiments provided insight into the chemical nature of the adsorbed chromium species. PMID:26134074

  12. Gravimetric chemical sensors based on silica-based mesoporous organic-inorganic hybrids.

    PubMed

    Xu, Jiaqiang; Zheng, Qi; Zhu, Yongheng; Lou, Huihui; Xiang, Qun; Cheng, Zhixuan

    2014-09-01

    Silica-based mesoporous organic-inorganic hybrid material modified quartz crystal microbalance (QCM) sensors have been examined for their ability to achieve highly sensitive and selective detection. Mesoporous silica SBA-15 serves as an inorganic host with large specific surface area, facilitating gas adsorption, and thus leads to highly sensitive response; while the presence of organic functional groups contributes to the greatly improved specific sensing property. In this work, we summarize our efforts in the rational design and synthesis of novel sensing materials for the detection of hazardous substances, including simulant nerve agent, organic vapor, and heavy metal ion, and develop high-performance QCM-based chemical sensors. PMID:25924299

  13. Mesoporous silica magnetite nanocomposite synthesized by using a neutral surfactant

    NASA Astrophysics Data System (ADS)

    Souza, K. C.; Salazar-Alvarez, G.; Ardisson, J. D.; Macedo, W. A. A.; Sousa, E. M. B.

    2008-05-01

    Magnetite nanoparticles coated by mesoporous silica were synthesized by an alternative chemical route using a neutral surfactant and without the application of any functionalization method. The magnetite (Fe3O4) nanoparticles were prepared by precipitation from aqueous media, and then coated with mesoporous silica by using nonionic block copolymer surfactants as the structure-directing agents. The mesoporous SiO2-coated Fe3O4 samples were characterized by x-ray diffraction, Fourier-transform infrared spectroscopy, N2 adsorption-desorption isotherms, transmission electron microscopy, 57Fe Mössbauer spectroscopy, and vibrating sample magnetometry. Our results revealed that the magnetite nanoparticles are completely coated by well-ordered mesoporous silica with free pores and stable (~8 nm thick) pore walls, and that the structural and magnetic properties of the Fe3O4 nanoparticles are preserved in the applied synthesis route.

  14. Three-layer structure graphene/mesoporous silica composites incorporated with C8-modified interior pore-walls for residue analysis of glucocorticoids in milk by liquid chromatography-tandem mass spectrometry.

    PubMed

    Liu, Xiaodan; Feng, Jianan; Sun, Xueni; Li, Yan; Duan, Gengli

    2015-07-16

    Three-layer structure graphene/mesoporous silica composites incorporated with C8-modified interior pore-walls (graphene@mSiO2-C8) were prepared and applied for efficient extraction of glucocorticoid residuals in milk followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. The graphene@mSiO2-C8 nanocomposites were synthesized by coating C8-modified mesoporous silica onto hydrophilic graphene nanosheets through a simple surfactant-mediated co-condensation sol-gel process. The obtained nanosheets possess unique properties of large surface area (632 m(2)/g), extended plate-like morphology in the exterior surface, highly open pore structure with uniform pore size (2.8 nm), numerous C8-modified interior pore-walls, as well as good water dispersibility. The performance of the prepared graphene@mSiO2-C8 materials for extracting small hydrophobic molecules directly from complex protein-rich samples was evaluated by analysis of glucocorticoids in milk. Extraction conditions such as sorbents amount, type and volume of eluting solvent, time of adsorption and desorption were investigated and optimized to achieve the best efficiency. Method validations including linearity, recovery, repeatability, and limit of detection (LOD) were also studied. The results indicated that this methodology provided low LOD (S/N=3, 0.0075-0.03 ng mL(-1)) and good linearity (0.03-60 ng mL(-1), R(2)>0.996) for glucocorticoids. Satisfactory reusability and stability were also obtained during the extraction. Finally, the graphene@mSiO2-C8 composites were successfully applied to the extraction and residue analysis of glucocorticoids in real milk samples. The experimental results showed that this novel approach offered an attractive choice for convenient, efficient and rapid solid-phase extraction of targeted hydrophobic compounds in biological samples. PMID:26073810

  15. Modulation of microporous/mesoporous structures in self-templated cobalt-silica.

    PubMed

    Martens, Dana L; Wang, David K; Motuzas, Julius; Smart, Simon; da Costa, João C Diniz

    2015-01-01

    Finite control of pore size distributions is a highly desired attribute when producing porous materials. While many methodologies strive to produce such materials through one-pot strategies, oftentimes the pore structure requires post-treatment modification. In this study, modulation of pore size in cobalt-silica systems was investigated by a novel, non-destructive, self-templated method. These systems were produced from two cobalt-containing silica starting materials which differed by extent of condensation. These starting materials, sol (SG') and xerogel (XG'), were mixed with pure silica sol to produce materials containing 5-40 mol% Co. The resultant SG-series materials exhibited typical attributes for cobalt-silica systems: mesoporous characteristics developed at high cobalt concentrations, coinciding with Co3O4 formation; whereas, in the XG-series materials, these mesoporous characteristics were extensively suppressed. Based on an examination of the resultant materials a mechanism describing the pore size formation and modulation of the two systems was proposed. Pore size modulation in the XG-series was caused, in part, by the cobalt source acting as an autogenous template for the condensation of the silica network. These domains could be modified when wetted, allowing for the infiltration and subsequent condensation of silica oligomers into the pre-formed, mesoporous cages, leading to a reduction in the mesoporous content of the final product. PMID:25609189

  16. Modulation of microporous/mesoporous structures in self-templated cobalt-silica

    NASA Astrophysics Data System (ADS)

    Martens, Dana L.; Wang, David K.; Motuzas, Julius; Smart, Simon; da Costa, João C. Diniz

    2015-01-01

    Finite control of pore size distributions is a highly desired attribute when producing porous materials. While many methodologies strive to produce such materials through one-pot strategies, oftentimes the pore structure requires post-treatment modification. In this study, modulation of pore size in cobalt-silica systems was investigated by a novel, non-destructive, self-templated method. These systems were produced from two cobalt-containing silica starting materials which differed by extent of condensation. These starting materials, sol (SG') and xerogel (XG'), were mixed with pure silica sol to produce materials containing 5-40 mol% Co. The resultant SG-series materials exhibited typical attributes for cobalt-silica systems: mesoporous characteristics developed at high cobalt concentrations, coinciding with Co3O4 formation; whereas, in the XG-series materials, these mesoporous characteristics were extensively suppressed. Based on an examination of the resultant materials a mechanism describing the pore size formation and modulation of the two systems was proposed. Pore size modulation in the XG-series was caused, in part, by the cobalt source acting as an autogenous template for the condensation of the silica network. These domains could be modified when wetted, allowing for the infiltration and subsequent condensation of silica oligomers into the pre-formed, mesoporous cages, leading to a reduction in the mesoporous content of the final product.

  17. Modulation of microporous/mesoporous structures in self-templated cobalt-silica

    PubMed Central

    Martens, Dana L.; Wang, David K.; Motuzas, Julius; Smart, Simon; da Costa, João C. Diniz

    2015-01-01

    Finite control of pore size distributions is a highly desired attribute when producing porous materials. While many methodologies strive to produce such materials through one-pot strategies, oftentimes the pore structure requires post-treatment modification. In this study, modulation of pore size in cobalt-silica systems was investigated by a novel, non-destructive, self-templated method. These systems were produced from two cobalt-containing silica starting materials which differed by extent of condensation. These starting materials, sol (SG′) and xerogel (XG′), were mixed with pure silica sol to produce materials containing 5–40 mol% Co. The resultant SG-series materials exhibited typical attributes for cobalt-silica systems: mesoporous characteristics developed at high cobalt concentrations, coinciding with Co3O4 formation; whereas, in the XG-series materials, these mesoporous characteristics were extensively suppressed. Based on an examination of the resultant materials a mechanism describing the pore size formation and modulation of the two systems was proposed. Pore size modulation in the XG-series was caused, in part, by the cobalt source acting as an autogenous template for the condensation of the silica network. These domains could be modified when wetted, allowing for the infiltration and subsequent condensation of silica oligomers into the pre-formed, mesoporous cages, leading to a reduction in the mesoporous content of the final product. PMID:25609189

  18. Bifunctional mesoporous silicas with clearly distinguished localization of grafted groups

    NASA Astrophysics Data System (ADS)

    Roik, N. V.; Belyakova, L. A.

    2013-12-01

    Bifunctional mesoporous silicas with clearly distinguished localization of grafted groups on the surface of particles and inside their pores were obtained by means of sol-gel synthesis with postsynthetic vapor-phase treatment in vacuum. It was found that the synthesized materials have the hexagonally ordered porous structure typical of MCM-41 type silica.

  19. Formation of monodisperse mesoporous silica microparticles via spray-drying.

    PubMed

    Waldron, Kathryn; Wu, Winston Duo; Wu, Zhangxiong; Liu, Wenjie; Selomulya, Cordelia; Zhao, Dongyuan; Chen, Xiao Dong

    2014-03-15

    In this work, a protocol to synthesize monodisperse mesoporous silica microparticles via a unique microfluidic jet spray-drying route is reported for the first time. The microparticles demonstrated highly ordered hexagonal mesostructures with surface areas ranging from ~900 up to 1500 m(2)/g and pore volumes from ~0.6 to 0.8 cm(3)/g. The particle size could be easily controlled from ~50 to 100 μm from the same diameter nozzle via changing the initial solute content, or changing the drying temperature. The ratio of the surfactant (CTAB) and silica (TEOS), and the amount of water in the precursor were found to affect the degree of ordering of mesopores by promoting either the self-assembly of the surfactant-silica micelles or the condensation of the silica as two competing processes in evaporation induced self-assembly. The drying rate and the curvature of particles also affected the self-assembly of the mesostructure. The particle mesostructure is not influenced by the inlet drying temperature in the range of 92-160 °C, with even a relatively low temperature of 92 °C producing highly ordered mesoporous microparticles. The spray-drying derived mesoporous silica microparticles, while of larger sizes and more rapidly synthesized, showed a comparable performance with the conventional mesoporous silica MCM-41 in controlled release of a dye, Rhodamine B, indicating that these spray dried microparticles could be used for the immobilisation and controlled release of small molecules. PMID:24461839

  20. Different Effects of the Immunomodulatory Drug GMDP Immobilized onto Aminopropyl Modified and Unmodified Mesoporous Silica Nanoparticles upon Peritoneal Macrophages of Women with Endometriosis

    PubMed Central

    Antsiferova, Yuliya; Sotnikova, Nataliya

    2013-01-01

    The aim of the present work was to compare in vitro the possibility of application of unmodified silica nanoparticles (UMNPs) and modified by aminopropyl groups silica nanoparticles (AMNPs) for topical delivery of immunomodulatory drug GMDP to the peritoneal macrophages of women with endometriosis. The absence of cytotoxic effect and high cellular uptake was demonstrated for both types of silica nanoparticles. The immobilization of GMDP on the UMNPs led to the suppression of the stimulatory effect of GMDP on the membrane expression of scavenger receptors SR-AI and SR-B, mRNAs expression of NOD2 and RAGE, and synthesis of proteolytic enzyme MMP-9 and its inhibitor TIMP-1. GMDP, immobilized onto AMNPs, enhanced the initially reduced membrane expression of SRs and increased NOD2, RAGE, and MMP-9 mRNAs expression by macrophages. Simultaneously high level of mRNAs expression of factors, preventing undesirable hyperactivation of peritoneal macrophages (SOCS1 and TIMP-1), was observed in macrophages incubated in the presence of GMDP, immobilized onto AMNPs. The effect of AMNPs immobilized GMDP in some cases exceeded the effect of free GMDP. Thus, among the studied types of silica nanoparticles, AMNPs are the most suitable nanoparticles for topical delivery of GMDP to the peritoneal macrophages. PMID:24455738

  1. Different effects of the immunomodulatory drug GMDP immobilized onto aminopropyl modified and unmodified mesoporous silica nanoparticles upon peritoneal macrophages of women with endometriosis.

    PubMed

    Antsiferova, Yuliya; Sotnikova, Nataliya; Parfenyuk, Elena

    2013-01-01

    The aim of the present work was to compare in vitro the possibility of application of unmodified silica nanoparticles (UMNPs) and modified by aminopropyl groups silica nanoparticles (AMNPs) for topical delivery of immunomodulatory drug GMDP to the peritoneal macrophages of women with endometriosis. The absence of cytotoxic effect and high cellular uptake was demonstrated for both types of silica nanoparticles. The immobilization of GMDP on the UMNPs led to the suppression of the stimulatory effect of GMDP on the membrane expression of scavenger receptors SR-AI and SR-B, mRNAs expression of NOD2 and RAGE, and synthesis of proteolytic enzyme MMP-9 and its inhibitor TIMP-1. GMDP, immobilized onto AMNPs, enhanced the initially reduced membrane expression of SRs and increased NOD2, RAGE, and MMP-9 mRNAs expression by macrophages. Simultaneously high level of mRNAs expression of factors, preventing undesirable hyperactivation of peritoneal macrophages (SOCS1 and TIMP-1), was observed in macrophages incubated in the presence of GMDP, immobilized onto AMNPs. The effect of AMNPs immobilized GMDP in some cases exceeded the effect of free GMDP. Thus, among the studied types of silica nanoparticles, AMNPs are the most suitable nanoparticles for topical delivery of GMDP to the peritoneal macrophages. PMID:24455738

  2. Aminopropyl-modified mesoporous silica SBA-15 as recovery agents of Cu(II)-sulfate solutions: Adsorption efficiency, functional stability and reusability aspects.

    PubMed

    Lombardo, M V; Videla, M; Calvo, A; Requejo, F G; Soler-Illia, G J A A

    2012-07-15

    Hybrid mesoporous materials are potentially useful for metal ion scavenging and retrieval because of their high surface areas, controlled accessibility and tailored functionalization. Some aspects that are linked to the performance of HMM include pore accessibility, stability of the organic functions and reusability. Knowledge of these aspects is critical in the design of adsorption-desorption protocols. In this work we produce and characterize propylamino-substituted large pore silica (SBA-15-N), which is submitted to Cu(II) adsorption from copper sulfate solutions, followed by desorption in acid media and material regeneration. We find that the hybrid material is an efficient adsorbent (1.15-1.75mmol Cu(II)g(-1)), although a fraction of the organic groups is lost during the adsorption process. An X-ray photoelectron spectroscopy (XPS) study demonstrates that the contents of amino groups are higher in the material surface, leading to different behaviors in Cu(II) complexation along the material. These materials can be regenerated by exposure to acidic media. Thermal processing of the hybrid materials leads to better durability in aqueous solutions during reprocessing, due to enhanced polycondensation of the inorganic framework. Thermally treated samples, once regenerated, are efficient adsorbents in a second step of Cu(II) adsorption. We discuss the materials processing factors involved in the improved adsorption of Cu(II), its quantitative release and reusability of the material. PMID:22595542

  3. Mesoporous silica nanoparticles in target drug delivery system: A review

    PubMed Central

    Bharti, Charu; Nagaich, Upendra; Pal, Ashok Kumar; Gulati, Neha

    2015-01-01

    Due to lack of specification and solubility of drug molecules, patients have to take high doses of the drug to achieve the desired therapeutic effects for the treatment of diseases. To solve these problems, there are various drug carriers present in the pharmaceuticals, which can used to deliver therapeutic agents to the target site in the body. Mesoporous silica materials become known as a promising candidate that can overcome above problems and produce effects in a controllable and sustainable manner. In particular, mesoporous silica nanoparticles (MSNs) are widely used as a delivery reagent because silica possesses favorable chemical properties, thermal stability, and biocompatibility. The unique mesoporous structure of silica facilitates effective loading of drugs and their subsequent controlled release of the target site. The properties of mesoporous, including pore size, high drug loading, and porosity as well as the surface properties, can be altered depending on additives used to prepare MSNs. Active surface enables functionalization to changed surface properties and link therapeutic molecules. They are used as widely in the field of diagnosis, target drug delivery, bio-sensing, cellular uptake, etc., in the bio-medical field. This review aims to present the state of knowledge of silica containing mesoporous nanoparticles and specific application in various biomedical fields. PMID:26258053

  4. Preparing mesoporous carbon and silica with rosin-silica composite gel.

    PubMed

    Liu, Haidi; Du, Shangfeng; Chen, Yunfa

    2009-02-01

    Mesoporous carbon and mesoporous silica were prepared respectively with a same rosin-silica nanocomposite gel which was synthesized by cogelating tetra-ethyl-oxy-silane (silica source) and rosin (carbon source). Carbonizing the gel in nitrogen and then etching away silica with alkaline solution, mesoporous carbon with specific surface area larger than 800 m2/g was obtained. If calcining the gel at high temperature in air for given time, porous silica with surface area higher than 700 m2/g was done. BET measurement was employed to investigate the pore distribution and surface area of the samples. Most of the pores in both the porous carbon and porous silica were mesoscale, which makes the materials potential in enzyme supports for bio-catalyzed reaction or adsorbents for contaminants with large molecular size. PMID:19441395

  5. In-situ immobilization of enzymes in mesoporous silicas

    NASA Astrophysics Data System (ADS)

    Santalla, Esther; Serra, Elías; Mayoral, Alvaro; Losada, José; Blanco, Rosa M.; Díaz, Isabel

    2011-04-01

    Lipase from Candida antarctica B, horseradish peroxidase and laccase have been entrapped in silica cages rising mesoporous structures. Lipase and laccase yielded the highest structured mesoporous material whereas horseradish peroxidase may have altered the symmetry giving as a result mesocelullar foam (MCF) type of cages. The possible effect in the final structure of the material of the nature, size and surface structure of the proteins as well as the presence of various additives in the enzyme extracts is currently under investigations.

  6. SEPARATION PROPERTIES OF SURFACE MODIFIED SILICA SUPPORTED LIQUID MEMBRANES FOR DIVALENT METAL REMOVAL/RECOVERY

    EPA Science Inventory

    The synthesis and separation properties of a mesoporous silica supported liquid membrane (SLM) were studied. The membranes consisted of a silica layer, from dip-coated colloidal silica, on a a-alumina support, modified with DCDMS (dichlorodimethyl silane) to add surface methyl g...

  7. Mesoporous-silica films, fibers, and powders by evaporation

    DOEpatents

    Bruinsma, Paul J.; Baskaran, Suresh; Bontha, Jagannadha R.; Liu, Jun

    2008-05-06

    This invention pertains to surfactant-templated nanometer-scale porosity of a silica precursor solution and forming a mesoporous material by first forming the silica precursor solution into a preform having a high surface area to volume ratio, then rapid drying or evaporating a solvent from the silica precursor solution. The mesoporous material may be in any geometric form, but is preferably in the form of a film, fiber, powder or combinations thereof. The rapid drying or evaporation of solvent from the solution is accomplished by layer thinning, for example spin casting, liquid drawing, and liquid spraying respectively. Production of a film is by layer thinning, wherein a layer of the silica precursor solution is formed on a surface followed by removal of an amount of the silica precursor solution and leaving a geometrically thinner layer of the silica precursor solution from which the solvent quickly escapes via evaporation. Layer thinning may be by any method including but not limited to squeegeeing and/or spin casting. In powder formation by spray drying, the same conditions of fast drying exists as in spin-casting (as well as in fiber spinning) because of the high surface-area to volume ratio of the product. When a powder is produced by liquid spraying, the particles or micro-bubbles within the powder are hollow spheres with walls composed of mesoporous silica. Mesoporous fiber formation starts with a similar silica precursor solution but with an added pre-polymer making a pituitous mixture that is drawn into a thin strand from which solvent is evaporated leaving the mesoporous fiber(s).

  8. Mesoporous-silica films, fibers, and powders by evaporation

    DOEpatents

    Bruinsma, Paul J.; Baskaran, Suresh; Bontha, Jagannadha R.; Liu, Jun

    1999-01-01

    This invention pertains to surfactant-templated nanometer-scale porosity of a silica precursor solution and forming a mesoporous material by first forming the silica precursor solution into a preform having a high surface area to volume ratio, then rapid drying or evaporating a solvent from the silica precursor solution. The mesoporous material may be in any geometric form, but is preferably in the form of a film, fiber, powder or combinations thereof. The rapid drying or evaporation of solvent from the solution is accomplished by layer thinning, for example spin casting, liquid drawing, and liquid spraying respectively. Production of a film is by layer thinning, wherein a layer of the silica precursor solution is formed on a surface followed by removal of an amount of the silica precursor solution and leaving a geometrically thinner layer of the silica precursor solution from which the solvent quickly escapes via evaporation. Layer thinning may be by any method including but not limited to squeegeeing and/or spin casting. In powder formation by spray drying, the same conditions of fast drying exists as in spin-casting (as well as in fiber spinning) because of the high surface-area to volume ratio of the product. When a powder is produced by liquid spraying, the particles or micro-bubbles within the powder are hollow spheres with walls composed of mesoporous silica. Mesoporous fiber formation starts with a similar silica precursor solution but with an added pre-polymer making a pituitous mixture that is drawn into a thin strand from which solvent is evaporated leaving the mesoporous fiber(s).

  9. Mesoporous-silica films, fibers, and powders by evaporation

    DOEpatents

    Bruinsma, P.J.; Baskaran, S.; Bontha, J.R.; Liu, J.

    1999-07-13

    This invention pertains to surfactant-templated nanometer-scale porosity of a silica precursor solution and forming a mesoporous material by first forming the silica precursor solution into a preform having a high surface area to volume ratio, then rapid drying or evaporating a solvent from the silica precursor solution. The mesoporous material may be in any geometric form, but is preferably in the form of a film, fiber, powder or combinations thereof. The rapid drying or evaporation of solvent from the solution is accomplished by layer thinning, for example spin casting, liquid drawing, and liquid spraying respectively. Production of a film is by layer thinning, wherein a layer of the silica precursor solution is formed on a surface followed by removal of an amount of the silica precursor solution and leaving a geometrically thinner layer of the silica precursor solution from which the solvent quickly escapes via evaporation. Layer thinning may be by any method including but not limited to squeegeeing and/or spin casting. In powder formation by spray drying, the same conditions of fast drying exists as in spin-casting (as well as in fiber spinning) because of the high surface-area to volume ratio of the product. When a powder is produced by liquid spraying, the particles or micro-bubbles within the powder are hollow spheres with walls composed of mesoporous silica. Mesoporous fiber formation starts with a similar silica precursor solution but with an added pre-polymer making a pituitous mixture that is drawn into a thin strand from which solvent is evaporated leaving the mesoporous fiber(s). 24 figs.

  10. Development of novel delivery system for warfarin based on mesoporous silica: adsorption characteristics of silica materials for the anticoagulant.

    PubMed

    Dolinina, Ekaterina S; Vorobyeva, Evgeniya V; Parfenyuk, Elena V

    2016-08-01

    The adsorption of the anticoagulant warfarin onto unmodified (UMS) and modified (phenyl (PhMS), methyl (MMS), mercaptopropyl (MPMS)) mesoporous silica materials was studied at pH 1.6 and 7.4 and in the temperature range of 293-325 K. The silica materials were prepared by sol-gel method for further characterization by FTIR spectroscopy, N2 adsorption/desorption method, transmission electron microscopy and zeta potential measurements. The effects of medium pH, temperature and surface modification of mesoporous silica material on their adsorption characteristics (adsorption capacity, thermodynamic parameters of adsorption) relative to anticoagulant warfarin were investigated. It was found that medium acid-base properties strongly affect the adsorption of warfarin due to the pH-dependent structural diversity of the drug and ionization state of the silica surfaces. The adsorption capacity of the silica materials at pH 1.6 decreases in the order: MMS > MPMS > UMS > PhMS. The influence of various non-covalent interactions on the adsorption capacity of the silica materials and energy of the drug-silica interactions is discussed. These results may be useful for the development of a novel delivery system of warfarin. PMID:26465269

  11. Enhanced retention of aqueous transition metals in mesoporous silica

    NASA Astrophysics Data System (ADS)

    Nelson, J.; Bargar, J.; Brown, G. E.; Maher, K.

    2013-12-01

    Mesoporosity (2-50 nm diameter pores) is abundant within grain coatings and primary silicate minerals in natural environments. Mesopores often contribute significantly to total specific surface area and act as gateways for the transport of subsurface solutes, including nutrients and contaminants, between mineral surfaces and ambient fluids. However, the physiochemical mechanisms of sorption and transport within mesopores cannot be assumed to be the same as for macropores (>50 nm), because of confinement-induced changes in water properties, the structure of electrical double layers, solvation shells and dehydration rates of aquo ions, and the charge and reactive site densities of mineral surfaces. Despite the ubiquity of confined spaces in natural and industrial porous media, few studies have examined the molecular-scale mechanisms and geochemical reactions controlling meso-confinement phenomena in environmentally relevant materials. We conducted batch Zn sorption experiments using synthetic, controlled pore-size (i.e., 7.5-300 nm), metal-oxide beads as model geologic substrates. Comparison of Zn adsorbed onto macroporous and mesoporous silica beads indicates Zn adsorption capacity is increased in mesopores when normalized to surface area. In the presence of a background electrolyte (i.e., NaCl), Zn sorption capacity to macroporous silica is reduced; however, no significant difference in Zn sorption capacity on mesoporous silica was observed between the presence and absence of a background electrolyte. The effect of competing cations is indirect evidence that mesopores promote inner-sphere complexation and reduce outer-sphere complexation. EXAFS characterization of adsorbed zinc to macroporous silica matches that reported for low Zn coverages on silica (Roberts et al., JCIS, 2003), whereas a different spectrum is observed for the mesoporous case. Shell-by-shell fitting indicates that Zn is dominantly in octahedral coordination in macropores, as opposed to

  12. Highly Loaded Mesoporous Silica/Nanoparticle Composites and Patterned Mesoporous Silica Films

    NASA Astrophysics Data System (ADS)

    Kothari, Rohit; Hendricks, Nicholas R.; Wang, Xinyu; Watkins, James J.

    2014-03-01

    Novel approaches for the preparation of highly filled mesoporous silica/nanoparticle (MS/NP) composites and for the fabrication of patterned MS films are described. The incorporation of iron platinum NPs within the walls of MS is achieved at high NP loadings by doping amphiphilic poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) (Pluronic®) copolymer templates via selective hydrogen bonding between the pre-synthesized NPs and the hydrophilic portion of the block copolymer. The MS is then synthesized by means of phase selective condensation of tetraethylorthosilicate (TEOS) within the NP loaded block copolymer templates dilated with supercritical carbon dioxide (scCO2) followed by calcination. For patterned films, microphase separated block copolymer/small molecule additive blends are patterned using UV-assisted nanoimprint lithography. Infusion and condensation of a TEOS within template films using ScCO2 as a processing medium followed by calcination yields the patterned MS films. Scanning electron microscopy is used characterize pattern fidelity and transmission electron microscopy analysis confirms the presence of the mesopores. Long range order in nanocomposites is confirmed by low angle x-ray diffraction.

  13. CD44-engineered mesoporous silica nanoparticles for overcoming multidrug resistance in breast cancer

    NASA Astrophysics Data System (ADS)

    Wang, Xin; Liu, Ying; Wang, Shouju; Shi, Donghong; Zhou, Xianguang; Wang, Chunyan; Wu, Jiang; Zeng, Zhiyong; Li, Yanjun; Sun, Jing; Wang, Jiandong; Zhang, Longjiang; Teng, Zhaogang; Lu, Guangming

    2015-03-01

    Multidrug resistance is a major impediment for the successful chemotherapy in breast cancer. CD44 is over-expressed in multidrug resistant human breast cancer cells. CD44 monoclonal antibody exhibits anticancer potential by inhibiting proliferation and regulating P-glycoprotein-mediated drug efflux activity in multidrug resistant cells. Thereby, CD44 monoclonal antibody in combination with chemotherapeutic drug might be result in enhancing chemosensitivity and overcoming multidrug resistance. The purpose of this study is to investigate the effects of the CD44 monoclonal antibody functionalized mesoporous silica nanoparticles containing doxorubicin on human breast resistant cancer MCF-7 cells. The data showed that CD44-modified mesoporous silica nanoparticles increased cytotoxicity and enhanced the downregulation of P-glycoprotein in comparison to CD44 antibody. Moreover, CD44-engineered mesoporous silica nanoparticles provided active target, which promoted more cellular uptake of DOX in the resistant cells and more retention of DOX in tumor tissues than unengineered counterpart. Animal studies of the resistant breast cancer xenografts demonstrated that CD44-engineered drug delivery system remarkably induced apoptosis and inhibited the tumor growth. Our results indicated that the CD44-engineered mesoporous silica nanoparticle-based drug delivery system offers an effective approach to overcome multidrug resistance in human breast cancer.

  14. The synthesis and application of two mesoporous silica nanoparticles as drug delivery system with different shape

    NASA Astrophysics Data System (ADS)

    Wang, Jiayi; Wang, Zhuyuan; Chen, Hui; Zong, Shenfei; Cui, Yiping

    2015-05-01

    Mesoporous silica nanospheres(MSNSs) have been obtained utilizing the conventional reverse micelles synthesis method while the mesoporous silica nanorods(MSNRs) have been acquired by means of changing certain parameters. Afterwards, the prepared mesoporous silica nanospheres and nanorods were used as drug carriers to load and release the classical cancer therapeutic drug—DOX. According to the absorption spectra, the encapsulation efficiency of the mesoporous silica nanospheres is almost as high as that of the nanospheres. Different from the familiar encapsulation efficiency, the release characteristic curves of the mesoporous silica nanospheres and nanorods possessed certain differences during the release process. Finally incellular fluorescence imaging was achieved to observe the endocytosis of the mesoporous silica materials. Our results show that although both of the two kinds of nanoparticles possess favourable properties for loading and releasing drugs, the mesoporous silica nanospheres perform better in dispersity and controlled release than the nanorods, which probably endow them the potential as incellular drug delivery system.

  15. Electrografting of 3-Aminopropyltriethoxysilane on a Glassy Carbon Electrode for the Improved Adhesion of Vertically Oriented Mesoporous Silica Thin Films.

    PubMed

    Nasir, Tauqir; Zhang, Lin; Vilà, Neus; Herzog, Grégoire; Walcarius, Alain

    2016-05-01

    Vertically oriented mesoporous silica has proven to be of interest for applications in a variety of fields (e.g., electroanalysis, energy, and nanotechnology). Although glassy carbon is widely used as an electrode material, the adherence of silica deposits is rather poor, causing mechanical instability. A solution to improve the adhesion of mesoporous silica films onto glassy carbon electrodes without compromising the vertical orientation and the order of the mesopores will greatly contribute to the use of this kind of modified carbon electrode. We propose here the electrografting of 3-aminopropyltriethoxysilane on glassy carbon as a molecular glue to improve the mechanical stability of the silica film on the electrode surface without disturbing the vertical orientation and the order of the mesoporous silica obtained by electrochemically assisted self-assembly. These findings are supported by a series of surface chemistry techniques such as X-ray photoelectron spectroscopy, scanning and transmission electron microscopy, and cyclic voltammetry. Finally, methylviologen was used as a model redox probe to investigate the cathodic potential region of both glassy carbon and indium tin oxide electrodes modified with mesoporous silica in order to demonstrate further the interest in the approach developed here. PMID:27065214

  16. Multifunctional mesoporous silica nanocomposite nanoparticles for theranostic applications.

    PubMed

    Lee, Ji Eun; Lee, Nohyun; Kim, Taeho; Kim, Jaeyun; Hyeon, Taeghwan

    2011-10-18

    Clever combinations of different types of functional nanostructured materials will enable the development of multifunctional nanomedical platforms for multimodal imaging or simultaneous diagnosis and therapy. Mesoporous silica nanoparticles (MSNs) possess unique structural features such as their large surface areas, tunable nanometer-scale pore sizes, and well-defined surface properties. Therefore, they are ideal platforms for constructing multifunctional materials that incorporate a variety of functional nanostructured materials. In this Account, we discuss recent progress by our group and other researchers in the design and fabrication of multifunctional nanocomposite nanoparticles based on mesoporous silica nanostructures for applications to simultaneous diagnosis and therapy. Versatile mesoporous silica-based nanocomposite nanoparticles were fabricated using various methods. Here, we highlight two synthetic approaches: the encapsulation of functional nanoparticles within a mesoporous silica shell and the assembly of nanoparticles on the surface of silica nanostructures. Various nanoparticles were encapsulated in MSNs using surfactants as both phase transfer agents and pore-generating templates. Using MSNs as a scaffold, functional components such as magnetic nanoparticles and fluorescent dyes have been integrated within these systems to generate multifunctional nanocomposite systems that maintain their individual functional characteristics. For example, uniform mesoporous dye-doped silica nanoparticles immobilized with multiple magnetite nanocrystals on their surfaces have been fabricated for their use as a vehicle capable of simultaneous magnetic resonance (MR) and fluorescence imaging and drug delivery. The resulting nanoparticle-incorporated MSNs were then tested in mice with tumors. These in vivo experiments revealed that these multifunctional nanocomposite nanoparticles were delivered to the tumor sites via passive targeting. These nanocomposite

  17. Plutonium complexation by phosphonate-functionalized mesoporous silica

    SciTech Connect

    Parsons-Moss, T; Schwaiger, L K; Hubaud, A; Hu, Y J; Tuysuz, H; Yang, P; Balasubramanian, K; Nitsche, H

    2010-10-27

    MCM-41-type mesoporous silica functionalized with the CMPO-based 'Ac-Phos' silane has been reported in the literature (1) to show good capacity as an acftinide sorbent material, with potential applications in environmental sequestration, aqueous waste separation and/or vitrification, and chemical sensing of actinides in solution. The study explores the complexation of Pu(IV and VI) and other selected actinides and lanthanides by SBA-15 type mesoporous silica functionalized with Ac-Phos. The Pu binding kinetics and binding capacity were determined for both the Ac-Phos functionalized and unmodified SBA-15. They analyzed the binding geometry and redox behavior of Pu(VI) by X-ray absorption spectroscopy (XAS). They discuss the synthesis and characterization of the functionalized mesoporous material, batch sorption experiments, and the detailed analyses of the actinide complexes that are formed. Structural measurements are paired with high-level quantum mechanical modeling to elucidate the binding mechanisms.

  18. Adsorption of mycotoxins in beverages onto functionalized mesoporous silicas

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Mycotoxins, natural toxins produced by fungi, are a global concern as contaminates of agricultural commodities. Exposure to these toxins can be reduced by the use of binding materials. Templated mesoporous silicas are promising materials with favorable adsorptive properties for dyes, ions, and toxin...

  19. Mesoporous silica material TUD-1 as a drug delivery system.

    PubMed

    Heikkilä, T; Salonen, J; Tuura, J; Hamdy, M S; Mul, G; Kumar, N; Salmi, T; Murzin, D Yu; Laitinen, L; Kaukonen, A M; Hirvonen, J; Lehto, V-P

    2007-02-22

    For the first time the feasibility of siliceous mesoporous material TUD-1 (Technische Universiteit Delft) for drug delivery was studied. Model drug, ibuprofen, was adsorbed into TUD-1 mesopores via a soaking procedure. Characterizations with nitrogen adsorption, XRD, TG, HPLC and DSC demonstrated the successful inclusion of ibuprofen into TUD-1 host. The amount of ibuprofen adsorbed into the nanoreservoir of TUD-1 material was higher than reported for other mesoporous silica drug carriers (drug/carrier 49.5 wt.%). Drug release studies in vitro (HBSS buffer pH 5.5) demonstrated a fast and unrestricted liberation of ibuprofen, with 96% released at 210 min of the dissolution assay. The drug dissolution profile of TUD-1 material with the random, foam-like three-dimensional mesopore network and high accessibility to the dissolution medium was found to be much faster (kinetic constant k = 10.7) and more diffusion based (release constant n = 0.64) compared to a mesoporous MCM-41 material with smaller, unidirectional mesopore channels (k = 4.7, n = 0.71). Also, the mesoporous carriers were found to significantly increase the dissolution rate of ibuprofen, when compared to the pure crystalline form of the drug (k = 0.6, n = 0.96). TUD-1 was constituted as a potential drug delivery device with fast release property, with prospective applications in the formulation of poorly soluble drug compounds. PMID:17046183

  20. Functionalized mesoporous silica nanoparticles for oral delivery of budesonide

    SciTech Connect

    Yoncheva, K.; Popova, M.; Szegedi, A.; Mihaly, J.; Tzankov, B.; Lambov, N.; Konstantinov, S.; Tzankova, V.; Pessina, F.; Valoti, M.

    2014-03-15

    Non-functionalized and amino-functionalized mesoporous silica nanoparticle were loaded with anti-inflammatory drug budesonide and additionally post-coated with bioadhesive polymer (carbopol). TEM images showed spherical shape of the nanoparticles and slightly higher polydispersity after coating with carbopol. Nitrogen physisorption and thermogravimetic analysis revealed that more efficient loading and incorporation into the pores of nanoparticles was achieved with the amino-functionalized silica carrier. Infrared spectra indicated that the post-coating of these nanoparticles with carbopol led to the formation of bond between amino groups of the functionalized carrier and carboxyl groups of carbopol. The combination of amino-functionalization of the carrier with the post-coating of the nanoparticles sustained budesonide release. Further, an in vitro model of inflammatory bowel disease showed that the cytoprotective effect of budesonide loaded in the post-coated silica nanoparticles on damaged HT-29 cells was more pronounced compared to the cytoprotection obtained with pure budesonide. -- Graphical abstract: Silica mesoporous MCM-41 particles were amino-functionalized, loaded with budesonide and post-coated with bioadhesive polymer (carbopol) in order to achieve prolonged residence of anti-inflammatory drug in GIT. Highlights: • Higher drug loading in amino-functionalized mesoporous silica. • Amino-functionalization and post-coating of the nanoparticles sustained drug release. • Achievement of higher cytoprotective effect with drug loaded into the nanoparticles.

  1. Rapid synthesis of ordered hexagonal mesoporous silica and their incorporation with Ag nanoparticles by solution plasma

    SciTech Connect

    Pootawang, Panuphong; Saito, Nagahiro; Takai, Osamu; Lee, Sang Yul

    2012-10-15

    Graphical abstract: Overall reactions of mesoporous silica and AgNPs-incorporated mesoporous silica syntheses by solution plasma process (SPP). Highlights: ► SPP for rapid synthesis of mesoporous silica. ► SPP for rapid synthesis of mesoporous silica and AgNPs incorporation. ► Higher surface area and larger pore diameter of mesoporous silica synthesized by SPP. -- Abstract: Rapid synthesis of silica with ordered hexagonal mesopore arrangement was obtained using solution plasma process (SPP) by discharging the mixture of P123 triblock copolymer/TEOS in acid solution. SPP, moreover, was utilized for Ag nanoparticles (AgNPs) incorporation in silica framework as one-batch process using silver nitrate (AgNO{sub 3}) solution as precursor. The turbid silicate gel was clearly observed after discharge for 1 min and the white precipitate formed at 3 min. The mesopore with hexagonal arrangement and AgNPs were observed in mesoporous silica. Two regions of X-ray diffraction patterns (2θ < 2° and 2θ = 35–90°) corresponded to the mesoporous silica and Ag nanocrystal characteristics. Comparing with mesoporous silica prepared by a conventional sol–gel route, surface area and pore diameter of mesoporous silica prepared by solution plasma were observed to be larger. In addition, the increase in Ag loading resulted in the decrease in surface area with insignificant variation in the pore diameter of mesoporous silica. SPP could be successfully utilized not only to enhance gelation time but also to increase surface area and pore diameter of mesoporous silica.

  2. Solution Plasma Process for Template Removal in Mesoporous Silica Synthesis

    NASA Astrophysics Data System (ADS)

    Pootawang, Panuphong; Saito, Nagahiro; Takai, Osamu

    2010-12-01

    The plasma discharge in aqueous solution was scientifically studied and applied to template removal in mesoporous silica synthesis. Highly dispersed spherical mesoporous silica particles were synthesized by the ternary surfactant system containing the Pluronic P123 copolymer (EO20PO69EO20), sodium dodecylbenzene sulfonate, and 1,1,2,2,3,3,4,4,4-nonafluoro-1-butane sulfonate, via the sol-gel method in acid solutions. The solution plasma process (SPP), instead of conventional thermal calcinations, was used to remove the template. The mechanism of the removal of the organic template occurred via oxidation by the hydroxyl radicals generated during discharge. The transformation of a mesopore structure from a disordered wormlike structure to a hexagonally arranged structure was observed by X-ray diffraction analysis and was confirmed by transmission electron microscopy. The results of the thermal analysis and functional group identification of mesoporous silica after SPP showed evidence of organic template removal. The surface area calculated using the Brunauer-Emmett-Teller (BET) theory and the mean pore diameter results could be used to evaluate the plasma efficiency, demonstrating that this method does not affect the pore size in the case of discharge in a solution of pH 3 compared with the results of thermal calcination. Hence, SPP was proved to be highly efficient for organic template removal, exhibiting short consumption time and less contamination.

  3. Synthesis and Characterization of Bionanoparticle-Silica Composites and Mesoporous Silica with Large Pores

    SciTech Connect

    Niu, Z.; Yang, L.; Kabisatpathy, S.; He, J.; Lee, A.; Ron, J.; Sikha, G.; Popov, B.N.; Emrick, T.; Russell, T. P.; Wang. Q.

    2009-03-24

    A sol-gel process has been developed to incorporate bionanoparticles, such as turnip yellow mosaic virus, cowpea mosaic virus, tobacco mosaic virus, and ferritin into silica, while maintaining the integrity and morphology of the particles. The structures of the resulting materials were characterized by transmission electron microscopy, small angle X-ray scattering, and N{sub 2} adsorption-desorption analysis. The results show that the shape and surface morphology of the bionanoparticles are largely preserved after being embedded into silica. After removal of the bionanoparticles by calcination, mesoporous silica with monodisperse pores, having the shape and surface morphology of the bionanoparticles replicated inside the silica, was produced,. This study is expected to lead to both functional composite materials and mesoporous silica with structurally well-defined large pores.

  4. Mesoporous Silica Nanoparticles and Films for Cargo Delivery

    NASA Astrophysics Data System (ADS)

    Guardado Alvarez, Tania Maria

    Mesoporous silica materials are well known materials that can range from films to nanoparticles. Mesoporous silica nanoparticles (MSNs) and mesoporous silica films have been of increasing interest among the scientific community for its use in cargo delivery. Silica provides ease of functionalization, a robust support and biocompatibility. Several methods have been used in order to give the mesoporous silica nanomaterials different qualities that render them a useful material with different characteristics. Among these methods is surface modification by taking advantage of the OH groups on the surface. When a molecule attached to the surface can act as a molecular machine it transforms the nanomaterial to act as delivery system that can be activated upon command. The work covered in this thesis focuses on the development and synthesis of different mesoporous silica materials for the purpose of trapping and releasing cargo molecules. Chapter 2 focuses in the photoactivation of "snap-top" stoppers over the pore openings of mesoporous silica nanoparticles that releases intact cargo molecules from the pores. The on-command release can be stimulated by either one UV photon or two coherent near-IR photons. Two-photon activation is particularly desirable for use in biological systems because it enables good tissue penetration and precise spatial control. Chapter 3 focuses on the design and synthesis of a nano-container consisting of mesoporous silica nanoparticles with the pore openings covered by "snap-top" caps that are opened by near-IR light. A photo transducer molecule that is a reducing agent in an excited electronic state is covalently attached to the system. Near IR two-photon excitation causes intermolecular electron transfer that reduces a disulfide bond holding the cap in place, thus allowing the cargo molecules to escape. The operation of the "snap-top" release mechanism by both one- and two photon is described. This system presents a proof of concept of a near

  5. Surfactant-free synthesis of mesoporous and hollow silica nanoparticles with an inorganic template.

    PubMed

    Baù, Luca; Bártová, Barbora; Arduini, Maria; Mancin, Fabrizio

    2009-12-28

    A surfactant-free synthesis of mesoporous and hollow silica nanoparticles is reported in which boron acts as the templating agent. Using such a simple and mild procedure as a treatment with water, the boron-rich phase is selectively removed, affording mesoporous pure silica nanoparticles with wormhole-like pores or, depending on the synthetic conditions, silica nanoshells. PMID:20024287

  6. Surface functionalized mesoporous silica nanoparticles for intracellular drug delivery

    NASA Astrophysics Data System (ADS)

    Vivero-Escoto, Juan Luis

    Mesoporous silica nanoparticles (MSNs) are a highly promising platform for intracellular controlled release of drugs and biomolecules. Despite that the application of MSNs in the field of intracellular drug delivery is still at its infancy very exciting breakthroughs have been achieved in the last years. A general review of the most recent progress in this area of research is presented, including a description of the latest findings on the pathways of entry into live mammalian cells together with the intracellular trafficking, a summary on the contribution of MSNs to the development of site-specific drug delivery systems, a report on the biocompatibility of this material in vitro andin vivo, and a discussion on the most recent breakthroughs in the synthesis and application of stimuli-responsive mesoporous silica-based delivery vehicles. A gold nanoparticles (AuNPs)-capped MSNs-based intracellular photoinduced drug delivery system (PR-AuNPs-MSNs) for the controlled release of anticancer drug inside of human fibroblast and liver cells was synthesized and characterized. We found that the mesoporous channels of MSNs could be efficiently capped by the photoresponsive AuNPs without leaking the toxic drug, paclitaxel, inside of human cells. Furthermore, we demonstrated that the cargo-release property of this PR-AuNPs-MSNs system could be easily photo-controlled under mild and biocompatible conditions in vitro. In collaboration with Renato Mortera (a visiting student from Italy), a MSNs based intracellular delivery system for controlled release of cell membrane impermeable cysteine was developed. A large amount of cysteine molecules were covalently attached to the silica surface of MSNs through cleavable disulfide linkers. These cysteine-containing nanoparticles were efficiently endocytosed by human cervical cancer cells HeLa. These materials exhibit 450 times higher cell growth inhibition capability than that of the conventional N-acetylcysteine prodrug. The ability to

  7. New triethoxysilylated 10-vertex closo-decaborate clusters. Synthesis and controlled immobilization into mesoporous silica.

    PubMed

    Abi-Ghaida, Fatima; Laila, Zahra; Ibrahim, Ghassan; Naoufal, Daoud; Mehdi, Ahmad

    2014-09-14

    Novel silylated hydroborate clusters comprising the closo-decaborate cage were prepared and characterized by (1)H, (13)C, (11)B, (29)Si NMR and mass spectroscopy ESI. The synthesis of such silylated clusters was achieved using reactive derivatives of [B10H10](2-), [1-B10H9N2](-) and [2-B10H9CO](-). These silylated decaborate clusters constitute a new class of precursors that can be covalently anchored onto various silica supports without any prior surface modification. As a proof of concept, the synthesized precursors were successfully anchored on mesoporous silica, SBA-15 type, in different percentages, where the mesoporous material retained its structure. All materials modified with closo-decaborate were characterized by (11)B and (29)Si solid state NMR, XRD, TEM and nitrogen sorption. PMID:25042868

  8. Highly ordered mesoporous silica nanoparticles and their application to DNA separation

    NASA Astrophysics Data System (ADS)

    Lee, Hye Sun; Chang, Jeong Ho

    2008-12-01

    This work describes the innovative development of high throughput human DNA purification process using the molecular self-assembled mesoporous silica nanoparticles. The mesoporous silica nanoparticles were prepared by sol-gel method and the formation of molecular self-assembled monolayers with functional groups was chemically demonstrated. The surface modification of functional groups was performed with aminofunctionallized organic silanes on mesoporous silica nanoparticles and the results of DNA separation was represented with electrophoresis images.

  9. Chemoradiotherapeutic wrinkled mesoporous silica nanoparticles for use in cancer therapy

    NASA Astrophysics Data System (ADS)

    Munaweera, Imalka; Koneru, Bhuvaneswari; Shi, Yi; Di Pasqua, Anthony J.; Balkus, Kenneth J., Jr.

    2014-11-01

    Over the last decade, the development and application of nanotechnology in cancer detection, diagnosis, and therapy have been widely reported. Engineering of vehicles for the simultaneous delivery of chemo- and radiotherapeutics increases the effectiveness of the therapy and reduces the dosage of each individual drug required to produce an observable therapeutic response. We here developed a novel chemoradiotherapeutic 1,2-dioleoyl-sn-glycero-3-phosphocholine lipid coated/uncoated platinum drug loaded, holmium-containing, wrinkled mesoporous silica nanoparticle. The materials were characterized with TEM, FTIR, 1H NMR, energy dispersive x-ray, inductively coupled plasma-mass spectrometry, and zeta potential measurements. In vitro platinum drug release from both lipid coated and uncoated chemoradiotherapeutic wrinkled mesoporous silica are reported. Various kinetic models were used to analyze the release kinetics. The radioactivity of the chemoradiotherapeutic nanocarriers was measured after neutron-activation.

  10. Chemoradiotherapeutic wrinkled mesoporous silica nanoparticles for use in cancer therapy

    SciTech Connect

    Munaweera, Imalka; Balkus, Kenneth J. Jr. E-mail: Anthony.DiPasqua@unthsc.edu; Koneru, Bhuvaneswari; Shi, Yi; Di Pasqua, Anthony J. E-mail: Anthony.DiPasqua@unthsc.edu

    2014-11-01

    Over the last decade, the development and application of nanotechnology in cancer detection, diagnosis, and therapy have been widely reported. Engineering of vehicles for the simultaneous delivery of chemo- and radiotherapeutics increases the effectiveness of the therapy and reduces the dosage of each individual drug required to produce an observable therapeutic response. We here developed a novel chemoradiotherapeutic 1,2-dioleoyl-sn-glycero-3-phosphocholine lipid coated/uncoated platinum drug loaded, holmium-containing, wrinkled mesoporous silica nanoparticle. The materials were characterized with TEM, FTIR, {sup 1}H NMR, energy dispersive x-ray, inductively coupled plasma-mass spectrometry, and zeta potential measurements. In vitro platinum drug release from both lipid coated and uncoated chemoradiotherapeutic wrinkled mesoporous silica are reported. Various kinetic models were used to analyze the release kinetics. The radioactivity of the chemoradiotherapeutic nanocarriers was measured after neutron-activation.

  11. Fluorescent Functionalized Mesoporous Silica for Radioactive Material Extraction

    SciTech Connect

    Li, Juan; Zhu, Kake; Shang, Jianying; Wang, Donghai; Nie, Zimin; Guo, Ruisong; Liu, Chongxuan; Wang, Zheming; Li, Xiaolin; Liu, Jun

    2012-08-01

    Mesoporous silica with covalently bound salicylic acid molecules incorporated in the structure was synthesized with a one-pot, co-condensation reaction at room temperature. The as-synthesized material has a large surface area, uniform particle size, and an ordered pore structure as determined by characterization with transmission electron microscopy, thermal gravimetric analysis, and infrared spectra, etc. Using the strong fluorescence and metal coordination capability of salicylic acid, functionalized mesoporous silica (FMS) was developed to track and extract radionuclide contaminants, such as uranyl [U(VI)] ions encountered in subsurface environments. Adsorption measurements showed a strong affinity of the FMS toward U(VI) with a Kd value of 105 mL/g, which is four orders of magnitude higher than the adsorption of U(VI) onto most of the sediments in natural environments. The new materials have a potential for synergistic environmental monitoring and remediation of the radionuclide U(VI) from contaminated subsurface environments.

  12. Mesoporous silica nanoparticles for bioadsorption, enzyme immobilisation, and delivery carriers

    NASA Astrophysics Data System (ADS)

    Popat, Amirali; Hartono, Sandy Budi; Stahr, Frances; Liu, Jian; Qiao, Shi Zhang; Qing (Max) Lu, Gao

    2011-07-01

    Mesoporous silica nanoparticles (MSNs) provide a non-invasive and biocompatible delivery platform for a broad range of applications in therapeutics, pharmaceuticals and diagnosis. The creation of smart, stimuli-responsive systems that respond to subtle changes in the local cellular environment are likely to yield long term solutions to many of the current drug/gene/DNA/RNA delivery problems. In addition, MSNs have proven to be promising supports for enzyme immobilisation, enabling the enzymes to retain their activity, affording them greater potential for wide applications in biocatalysis and energy. This review provides a comprehensive summary of the advances made in the last decade and a future outlook on possible applications of MSNs as nanocontainers for storage and delivery of biomolecules. We discuss some of the important factors affecting the adsorption and release of biomolecules in MSNs and review of the cytotoxicity aspects of such nanomaterials. The review also highlights some promising work on enzyme immobilisation using mesoporous silica nanoparticles.

  13. Contamination-resistant silica antireflective coating with closed ordered mesopores.

    PubMed

    Sun, Jinghua; Zhang, Qinghua; Ding, Ruimin; Lv, Haibing; Yan, Hongwei; Yuan, Xiaodong; Xu, Yao

    2014-08-21

    Porous silica optical antireflective (AR) coatings prepared by traditional sol-gel method have been extensively used for high power laser systems, but a serious drawback is that contamination existing in the high vacuum is easily absorbed by the disordered open pore structure, resulting in a fast decrease in transmittance. To improve the stability of transmittance in vacuum, a contamination-resistant silica AR coating with ordered mesopores completely closed by hydrophobic-oleophobic groups was successfully developed on a fused quartz substrate. The ordered mesopores in the coating were controlled under the direction of surfactant F127 via an evaporation-induced-self-assembling process and then were closed by post-grafting long chain fluoroalkylsilane. The grazing incidence small angle X-ray scattering (GISAXS) and the X-ray reflectivity (XRR) results indicated that the mesopores in the coating constructed a Fmmm orthorhombic symmetry structure with a (010) plane parallel to the substrate. Cage-like mesopores were confirmed by nitrogen adsorption-desorption analysis. The obtained coatings showed low surface roughness, excellent abrase-resistance and high transmittance of 100% on quartz substrate. Especially, the decrease of transmittance tested with polydimethylsiloxane pollution in vacuum within one-month was as small as 0.02%. The laser induced damage threshold was up to 59.8 J cm(-2) at a 12 ns laser pulse of 1053 nm wavelength. This work provides an alternative way to fabricate AR coatings with high stability. PMID:25000419

  14. Controlling stability of gold nanoparticles in mesoporous silica

    NASA Astrophysics Data System (ADS)

    Bore, Mangesh Tukaram

    Metal particles deposited on oxide supports are used extensively as heterogeneous catalysts. By using a suitable combination of active metal phases and supports, the catalysts are designed for high activity, selectivity and mechanical strength. However, catalysts undergo deactivation, with poisoning, fouling, sintering and volatilization being some of the common reasons for loss of catalyst activity. For supported metal catalysts, sintering of metal particles is a major cause of catalyst deactivation. The rate and extent of sintering of supported metals depends upon temperature, atmosphere, support, promoter and metal. It is known that gold nanoparticles show high reactivity for CO oxidation at low temperature, but only when the Au particles are very small (<5 nm). Gold nanoparticles supported on silica show rapid sintering at 200°C--400°C. Porosity of support could play an important role in controlling the sintering of metal particles. But the role of pore size, pore curvature and structure is difficult to study with conventional supported metal catalysts. Surfactant templated mesoporous silica is a promising support material since it provides well defined pores of uniform size and structure. Hence, these silica supports provide ideal model systems for control of nanoparticle sintering. Limitations of mesoporous silica are its low hydrothermal stability at elevated temperatures and its inert nature. The pores of mesoporous silica reportedly collapse at temperatures above 500°C and gold nanoparticles supported on reducible oxides such as TiO2, CO3O4 and Fe2O 3 are more active compared to pure silica for CO oxidation. In this work highly dispersed gold nanoparticles (<2 nm) were prepared within the pores of silica with pore sizes ranging from 2.2 nm to 6.5 nm and differing pore architecture (2D-hexagonal, 3D-hexagonal, cubic and pores coiled-up in spherical geometry). In the 2D-hexagonal pore structure, the pores are one dimensional and terminate on the particle

  15. Photon-Manipulated Drug Release from Mesoporous Nanocontainer Controlled by Azobenzene-Modified Nucleic Acid

    PubMed Central

    Yuan, Quan; Zhang, Yunfei; Chen, Tao; Lu, Danqing; Zhao, Zilong; Zhang, Xiaobing; Li, Zhenxing; Yan, Chun-Hua; Tan, Weihong

    2012-01-01

    Herein a photon manipulated mesoporous release system was constructed based on azobenzene-modified nucleic acids. In this system, the azobenzene-incorporated DNA double strands were immobilized at the pore mouth of meso-porous silica nanoparticles. The photo-isomerization of azobenzene induced dehybridization/hybridization switch of complementary DNA, causing uncapping/capping of pore gates of mesoporous silica. This nanoplatform permits holding of guest molecules within the nanopores under visible light but release them when light wavelength turns to UV range. These DNA/mesoporous silica hybrid nanostructures were exploited as carriers for cancer cell chemotherapy drug doxorubicin (DOX) due to its stimuli-responsive property as well as good biocompatibility via MTT assay. It is found that the drug release behavior is light wavelength sensitive. Switching of the light from visible to UV range uncapped the pores causes the release of DOX from the mesoporous silica nanospheres and an obvious cytotoxic effect on cancer cells. We envision that this photo-controlled drug release system could find potential applications in cancer therapy. PMID:22670595

  16. Neoglycoenzyme-Gated Mesoporous Silica Nanoparticles: Toward the Design of Nanodevices for Pulsatile Programmed Sequential Delivery.

    PubMed

    Díez, Paula; Sánchez, Alfredo; de la Torre, Cristina; Gamella, María; Martínez-Ruíz, Paloma; Aznar, Elena; Martínez-Máñez, Ramón; Pingarrón, José M; Villalonga, Reynaldo

    2016-03-01

    We report herein the design of a stimulus-programmed pulsatile delivery system for sequential cargo release based on the use of a lactose-modified esterase as a capping agent in phenylboronic acid functionalized mesoporous silica nanoparticles. The dual-release mechanism was based on the distinct stability of the cyclic boronic acid esters formed with lactose residues and the long naturally occurring glycosylation chains in the modified neoglycoenzyme. Cargo delivery in succession was achieved using glucose and ethyl butyrate as triggers. PMID:26966914

  17. Protocells: Modular Mesoporous Silica Nanoparticle-Supported Lipid Bilayers for Drug Delivery.

    PubMed

    Butler, Kimberly S; Durfee, Paul N; Theron, Christophe; Ashley, Carlee E; Carnes, Eric C; Brinker, C Jeffrey

    2016-04-27

    Mesoporous silica nanoparticle-supported lipid bilayers, termed 'protocells,' represent a potentially transformative class of therapeutic and theranostic delivery vehicle. The field of targeted drug delivery poses considerable challenges that cannot be addressed with a single 'magic bullet'. Consequently, the protocell has been designed as a modular platform composed of interchangeable biocompatible components. The mesoporous silica core has variable size and shape to direct biodistribution and a controlled pore size and surface chemistry to accommodate diverse cargo. The encapsulating supported lipid bilayer can be modified with targeting and trafficking ligands as well as polyethylene glycol (PEG) to effect selective binding, endosomal escape of cargo, drug efflux prevention, and potent therapeutic delivery, while maintaining in vivo colloidal stability. This review describes the individual components of the platform, including the mesoporous silica nanoparticle core and supported lipid bilayer, their assembly (by multiple techniques) into a protocell, and the combined, often synergistic, performance of the protocell based on in vitro and in vivo studies, including the assessment of biocompatibility and toxicity. In closing, the many emerging variations of the protocell theme and the future directions for protocell research are commented on. PMID:26780591

  18. Alendronate decorated nano hydroxyapatite in mesoporous silica: Cytotoxicity and osteogenic properties

    NASA Astrophysics Data System (ADS)

    Huang, Wei; Liu, Weiqiang; She, Zhending; Wu, Hongkai; Shi, Xuetao

    2011-09-01

    Mesoporous silica is a promising drug delivery vehicle due to its large surface area and order porous structure. Hydroxyapatite-modified mesoporous silica materials (MSH) have been developed, and the cytotoxicity of MSH and unmodified mesoporous silica (HMS) has also been studied in this work. The results indicated that MSH exhibited lower cytotoxicity than HMS. The drug release property of MSH was also investigated in this paper. Alendronate (AL) was laden into MSH and HMS, respectively. MSH exhibited long release period lasting over 30 days with a weak burst release in the first 5 days; however, the AL release period of HMS was just 5 days with a remarkable burst release. In addition, the osteogenic commitment induced in human marrow mesenchymal stem cells (MSCs) by MSH-alendronate (MSH-AL) was also investigated, and the osteogenesis of MSCs was evaluated by alkaline phosphatase (ALP) assay. The osteogenesis of MSCs induced by MSH-AL is comparable to that induced by the osteogenic medium. Taken together, MSH can be severed as potential bone repair materials with lower cytotoxicity.

  19. Morphological Control of Multifunctional Mesoporous Silica Nanomaterials for Catalysis Applications

    SciTech Connect

    Seong Huh

    2004-12-19

    I found an efficient method to control the morphology of the organically monofunctionalized mesoporous silica materials by introducing different types of organoalkoxysilanes in a base-catalyzed co-condensation reaction. The monofunctionalized materials exhibit different particle morphologies relative to the pure MCM-41 material. The concentration dependence of the morphology is a critical factor to determine the final particle shape. A proposed mechanism of the shape evolution is also offered. After understanding the role of organoalkoxysilanes in producing various well-shaped nanomaterials, I also obtained a series of bifunctional mesoporous silica materials with certain particle morphology. A series of bifunctional mesoporous silica nanospheres (MSNs) whose physicochemical properties was investigated via solid state NMR techniques and Cu{sup 2+} adsorption capacity tests, The ratio of two different organic groups inside of mesopores of these MSNs could be fine-tuned. These MSNs serve as a useful model system to study substrate selectivity in catalytic reactions and sorption phenomena. For example, the Cu{sup 2+} adsorption capacity of these materials was dictated by the chemical nature of the mesopores generated by the different organic functional groups. An investigation of the substrate selectivity of the bifunctionalized MSNs in a competitive nitroaldol reaction using an equimolar amount of two competing 4-nitrobenzaldehyde derivatives was performed. Shape-controlled bifunctional MSNs were employed as the catalysts. The properties of the MSNs were investigated using various spectroscopic methods and electron microscopy. The more hydrophobic the surface organic groups are, the higher the ratio of hydrophobic final product. This is the first example to demonstrate the selection of substrate using physicochemical nature of the mesopore surface other than the conventional shape selection in zeolite systems. I also created a cooperative dual catalyst system that is

  20. Morphological control of multifunctionalized mesoporous silica nanomaterials for catalysis applications

    NASA Astrophysics Data System (ADS)

    Huh, Seong

    I found an efficient method to control the morphology of the organically monofunctionalized mesoporous silica materials by introducing different types of organoalkoxysilanes in a base-catalyzed co-condensation reaction. The monofunctionalized materials exhibit different particle morphologies relative to the pure MCM-41 material. The concentration dependence of the morphology is a critical factor to determine the final particle shape. A proposed mechanism of the shape evolution is also offered. After understanding the role of organoalkoxysilanes in producing various well-shaped nanomaterials, I also obtained a series of bifunctional mesoporous silica materials with certain particle morphology. A series of bifunctional mesoporous silica nanospheres (MSNs) whose physicochemical properties was investigated via solid state NMR techniques and Cu 2+ adsorption capacity tests. The ratio of two different organic groups inside of mesopores of these MSNs could be fine-tuned. These MSNs serve as a useful model system to study substrate selectivity in catalytic reactions and sorption phenomena. For example, the Cu2+ adsorption capacity of these materials was dictated by the chemical nature of the mesopores generated by the different organic functional groups. An investigation of the substrate selectivity of the bifunctionalized MSNs in a competitive nitroaldol reaction using an equimolar amount of two competing 4-nitrobenzaldehyde derivatives was performed. Shape-controlled bifunctional MSNs were employed as the catalysts. The properties of the MSNs were investigated using various spectroscopic methods and electron microscopy. The more hydrophobic the surface organic groups are, the higher the ratio of hydrophobic final product. This is the first example to demonstrate the selection of substrate using physicochemical nature of the mesopore surface other than the conventional shape selection in zeolite systems. I also created a cooperative dual catalyst system that is capable of

  1. Functionalized mesoporous silica nanoparticles for oral delivery of budesonide

    NASA Astrophysics Data System (ADS)

    Yoncheva, K.; Popova, M.; Szegedi, A.; Mihaly, J.; Tzankov, B.; Lambov, N.; Konstantinov, S.; Tzankova, V.; Pessina, F.; Valoti, M.

    2014-03-01

    Non-functionalized and amino-functionalized mesoporous silica nanoparticle were loaded with anti-inflammatory drug budesonide and additionally post-coated with bioadhesive polymer (carbopol). TEM images showed spherical shape of the nanoparticles and slightly higher polydispersity after coating with carbopol. Nitrogen physisorption and thermogravimetic analysis revealed that more efficient loading and incorporation into the pores of nanoparticles was achieved with the amino-functionalized silica carrier. Infrared spectra indicated that the post-coating of these nanoparticles with carbopol led to the formation of bond between amino groups of the functionalized carrier and carboxyl groups of carbopol. The combination of amino-functionalization of the carrier with the post-coating of the nanoparticles sustained budesonide release. Further, an in vitro model of inflammatory bowel disease showed that the cytoprotective effect of budesonide loaded in the post-coated silica nanoparticles on damaged HT-29 cells was more pronounced compared to the cytoprotection obtained with pure budesonide.

  2. A High Temperature Capacitive Humidity Sensor Based on Mesoporous Silica

    PubMed Central

    Wagner, Thorsten; Krotzky, Sören; Weiß, Alexander; Sauerwald, Tilman; Kohl, Claus-Dieter; Roggenbuck, Jan; Tiemann, Michael

    2011-01-01

    Capacitive sensors are the most commonly used devices for the detection of humidity because they are inexpensive and the detection mechanism is very specific for humidity. However, especially for industrial processes, there is a lack of dielectrics that are stable at high temperature (>200 °C) and under harsh conditions. We present a capacitive sensor based on mesoporous silica as the dielectric in a simple sensor design based on pressed silica pellets. Investigation of the structural stability of the porous silica under simulated operating conditions as well as the influence of the pellet production will be shown. Impedance measurements demonstrate the utility of the sensor at both low (90 °C) and high (up to 210 °C) operating temperatures. PMID:22163790

  3. Synthesis of titania modified silica-pillared clay (SPC) with highly ordered interlayered mesoporous structure for removing toxic metal ion Cr(VI) from aqueous state

    NASA Astrophysics Data System (ADS)

    Mao, Huihui; Zhu, Kongnan; Li, Baoshan; Yao, Chao; Kong, Yong

    2014-02-01

    Titanium-functionalized silica-pillared clays synthesized through post synthetic route was utilized as adsorbers for the removal of Cr(VI) ions from aqueous solutions under different temperatures and initial concentrations. The starting mesostructured silica-pillared clay is assembled by intragallery ammonia-catalyzed hydrolysis of tetraethoxysilane using cationic surfactant as gallery template, and subsequently, the formed interlayered pore walls were decorated with nano-sized TiO2 particle through organic titanium functionalization process. The kind of structural transformation has been confirmed by X-ray diffraction (XRD), nitrogen adsorption-desorption isotherms, Fourier transform infrared (FT-IR) analysis, UV-vis diffuse reflectance spectroscopy (DRS), elemental analysis (XRF), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Such results indicate that most of the grafted titanium species was combined with Si-OH on the surface of gallery pores. By changing the concentration of organic titanium source during synthesis, the porous structure system is effected. Under suitable conditions, these materials exhibit high adsorption capacity and efficiency. Qualitative estimates of the thermodynamic parameters showed that the overall adsorption process is spontaneous (ΔG° < 0) and endothermic (ΔH° > 0). The adsorption isotherms of Cr(VI) on titanium-functionalized silica-pillared clay were best fitted by Redlich-Peterson models. Detail results of thermodynamics and kinetics are also presented.

  4. Crystallization of hollow mesoporous silica nanoparticles.

    PubMed

    Drisko, Glenna L; Carretero-Genevrier, Adrian; Perrot, Alexandre; Gich, Martí; Gàzquez, Jaume; Rodriguez-Carvajal, Juan; Favre, Luc; Grosso, David; Boissière, Cédric; Sanchez, Clément

    2015-03-11

    Complex 3D macrostructured nanoparticles are transformed from amorphous silica into pure polycrystalline α-quartz using catalytic quantities of alkaline earth metals as devitrifying agent. Walls as thin as 10 nm could be crystallized without losing the architecture of the particles. The roles of cation size and the mol% of the incorporated devitrifying agent in crystallization behavior are studied, with Mg(2+), Ca(2+), Sr(2+) and Ba(2+) all producing pure α-quartz under certain conditions. PMID:25503642

  5. Gold Incorporated Mesoporous Silica Thin Film Model Surface as a Robust SERS and Catalytically Active Substrate.

    PubMed

    Sunil Sekhar, Anandakumari Chandrasekharan; Vinod, Chathakudath Prabhakaran

    2016-01-01

    Ultra-small gold nanoparticles incorporated in mesoporous silica thin films with accessible pore channels perpendicular to the substrate are prepared by a modified sol-gel method. The simple and easy spin coating technique is applied here to make homogeneous thin films. The surface characterization using FESEM shows crack-free films with a perpendicular pore arrangement. The applicability of these thin films as catalysts as well as a robust SERS active substrate for model catalysis study is tested. Compared to bare silica film our gold incorporated silica, GSM-23F gave an enhancement factor of 10³ for RhB with a laser source 633 nm. The reduction reaction of p-nitrophenol with sodium borohydride from our thin films shows a decrease in peak intensity corresponding to -NO₂ group as time proceeds, confirming the catalytic activity. Such model surfaces can potentially bridge the material gap between a real catalytic system and surface science studies. PMID:27213321

  6. In Situ Loading of Drugs into Mesoporous Silica SBA-15.

    PubMed

    Wan, Mi Mi; Li, Yan Yan; Yang, Tian; Zhang, Tao; Sun, Xiao Dan; Zhu, Jian Hua

    2016-04-25

    In a new strategy for loading drugs into mesoporous silica, a hydrophilic (heparin) or hydrophobic drug (ibuprofen) is encapsulated directly in a one-pot synthesis by evaporation-induced self-assembly. In situ drug loading significantly cuts down the preparation time and dramatically increases the loaded amount and released fraction of the drug, and appropriate drug additives favor a mesoporous structure of the vessels. Drug loading was verified by FTIR spectroscopy and release tests, which revealed much longer release with a larger amount of heparin or ibuprofen compared to postloaded SBA-15. Besides, the in vitro anticoagulation properties of the released heparin and the biocompatibility of the vessels were carefully assessed, including activated partial thromboplastin time, thrombin time, hemolysis, platelet adhesion experiments, and the morphologies of red blood cells. A concept of new drug-release agents with soft core and hard shell is proposed and offers guidance for the design of novel drug-delivery systems. PMID:26999658

  7. Preparation of the narrow size distribution USPIO in mesoporous silica for magnetic field guided drug delivery and release

    NASA Astrophysics Data System (ADS)

    Zapotoczny, B.; Guskos, N.; Kozioł, J. J.; Dudek, M. R.

    2015-01-01

    Ultra-small superparamagnetic iron oxides (USPIO) with an average diameter of 2 nm were synthesized in mesoporous silica using the method of co-precipitation of Fe2+ and Fe3+ ions in aqueous solution directly in the silica nanopores. Two types of the silica material, hexagonal phase MCM-41 and mesoporous silica spheres (MSS), were used. The resulting magnetically modified silica samples show high-quality superparamagnetic properties which persist also at low temperatures near 2 K. Their magnetization saturation in an applied external magnetic field exceeds 15 emu/g. The magnetically modified silica samples were studied with the help of the ferromagnetic resonance (FMR), SQUID-magnetometry, X-ray diffraction (XRD), dynamic light scattering (DLS) and TEM/EDX microscopy. The studies were complemented by confirming the possibility of drug release by the modified silica samples where the standard fluorescent dye was used as an example. The prepared material is suggested to be considered for magnetic field guided drug delivery and release.

  8. Sponge mesoporous silica formation using disordered phospholipid bilayers as template.

    PubMed

    Galarneau, Anne; Sartori, Federica; Cangiotti, Michela; Mineva, Tzonka; Di Renzo, Francesco; Ottaviani, M Francesca

    2010-02-18

    Lecithin/dodecylamine/lactose mixtures in ethanol/aqueous media led to the formation of sponge mesoporous silica (SMS) materials by means of tetraethoxysilane (TEOS) as silica source. SMS materials show a "sponge-mesoporous" porosity with a pore diameter of about 5-6 nm, in accordance to the length of a lecithin bilayer. SMS synthesis was developed to create a new class of powerful biocatalysts able to efficiently encapsulate enzymes by adding a porosity control to the classical sol-gel synthesis and by using phospholipids and lactose as protecting agents for the enzymes. In the present study, the formation of SMS was investigated by using electron paramagnetic resonance (EPR) probes inserted inside phospholipid bilayers. The influence of progressive addition of each component (ethanol, dodecylamine, lactose, TEOS) on phospholipid bilayers was first examined; then, the time evolution of EPR spectra during SMS synthesis was studied. Parameters informative of mobility, structure, order, and polarity around the probes were extracted by computer analysis of the EPR line shape. The results were discussed on the basis of solids characterization by X-ray diffraction, nitrogen isotherm, transmission electron microscopy, and scanning electron microscopy. The results, together with the well-known ability of ethanol to promote membrane hemifusion, suggested that the templating structure is a bicontinuous phospholipid bilayer phase, shaped as a gyroid, resulting of multiple membrane hemifusions induced by the high alcohol content used in SMS synthesis. SMS synthesis was compared to hexagonal mesoporous silica (HMS) synthesis accomplished by adding TEOS to a dodecylamine/EtOH/water mixture. EPR evidenced the difference between HMS and SMS synthesis; the latter uses an already organized but slowly growing mesophase of phospholipids, never observed before, whereas the former shows a progressive elongation of micelles into wormlike structures. SMS-type materials represent a new

  9. Silver nanoparticles incorporated onto ordered mesoporous silica from Tollen's reagent

    NASA Astrophysics Data System (ADS)

    Zienkiewicz-Strzałka, M.; Pasieczna-Patkowska, S.; Kozak, M.; Pikus, S.

    2013-02-01

    Noble metal nanostructures supported on mesoporous silica are bridge between traditional silica adsorbents and modern catalysts. In this work the Ag/SBA-15 mesoporous materials were synthesized and characterized. Various forms of nanosilver supported on ordered mesoporous template have been successfully obtained via proposed procedures. In all synthesized materials, Tollen's reagent (diammine silver complex [Ag(NH3)2]+) was used as a silver source. Silver nanoparticles were prepared by reduction of ammoniacal silver complex by formaldehyde in the solution of stabilizer. After reduction, Ag nanoparticles could be deposited on SBA-15, or added during traditional synthesis of SBA-15 giving silver or silver chloride nanoparticles in the combination with porous silica. Silver nanostructures as nanoparticles or nanowires were also embedded onto the SBA-15 by incipient wetness impregnation of silver ions. Absorbed silver ions were next reduced under hydrogen at high temperature. There are many advantages of utilized ammoniacal silver complex as a silver source. Proposed method is capable to synthesis of various metal nanostructures with controlled composition and morphology. The silver ammonia complex is composed of two ions surrounding and protecting the central silver ion, so it is possible to obtain very small nanoparticles using simple approach without any functionalization of external and internal surface of SBA-15. This approach allows obtaining greatly small silver nanoparticles on SBA-15 (4 nm) or nanowires depending on the metal loading amount. Moreover, the colloidal silver solution prepared from Tollen's reagent, in the presence of triblock copolymer, remains stable for a long time. Reduction of Tollen's reagent to silver colloidal solution seems to be efficient, fast and interesting approach for the preparation of supported silver nanostructures Obtained samples were characterized by powder X-ray diffraction, small angle X-ray scattering (SAXS), UV

  10. Synthesis of white light emitting mesoporous carbon-silica nanocomposite

    NASA Astrophysics Data System (ADS)

    Sato, Koji; Ishikawa, Yukari; Matsumura, Akihiro; Ishii, Yosuke; Kawasaki, Shinji

    2011-05-01

    White light emitting mesoporous carbon-silica (MPCS) was synthesized by serially adding triblock copolymer (Pluronic, F127), ethanol (EtOH), tetraethoxysilane (TEOS), hydrochloric acid aqueous (HCl) and phenol-formaldehyde resin (resol) followed by the heat treatments of carbonization and oxidation. The PL intensity of MPCS showed a tendency to be strong with increasing of HCl concentration in >= 0.2 M. The pore size of MPCS that emits white light was 8 ~ 9 nm and the specific surface area was 320 ~ 418 m2 / g.

  11. Peptide-laden mesoporous silica nanoparticles with promoted bioactivity and osteo-differentiation ability for bone tissue engineering.

    PubMed

    Luo, Zuyuan; Deng, Yi; Zhang, Ranran; Wang, Mengke; Bai, Yanjie; Zhao, Qiang; Lyu, Yalin; Wei, Jie; Wei, Shicheng

    2015-07-01

    Combination of mesoporous silica materials and bioactive factors is a promising niche-mimetic solution as a hybrid bone substitution for bone tissue engineering. In this work, we have synthesized biocompatible silica-based nanoparticles with abundant mesoporous structure, and incorporated bone-forming peptide (BFP) derived from bone morphogenetic protein-7 (BMP-7) into the mesoporous silica nanoparticles (MSNs) to obtain a slow-release system for osteogenic factor delivery. The chemical characterization demonstrates that the small osteogenic peptide is encapsulated in the mesoporous successfully, and the nitrogen adsorption-desorption isotherms suggest that the peptide encapsulation has no influence on mesoporous structure of MSNs. In the cell experiment, the peptide-laden MSNs (p-MSNs) show higher MG-63 cell proliferation, spreading and alkaline phosphatase (ALP) activity than the bare MSNs, indicating good in vitro cytocompatibility. Simultaneously, the osteogenesis-related proteins expression and calcium mineral deposition disclose enhanced osteo-differentiation of human mesenchymal stem cells (hMSCs) under the stimulation of the p-MSNs, confirming that BFP released from MSNs could significantly promote the osteogenic differentiation of hMSCs, especially at 500μg/mL of p-MSNs concentration. The peptide-modified MSNs with better bioactivity and osteogenic differentiation make it a potential candidate as bioactive material for bone repairing, bone regeneration, and bio-implant coating applications. PMID:25969416

  12. Synthesis of mesoporous silica hollow nanospheres with multiple gold cores and catalytic activity.

    PubMed

    Chen, Junchen; Xue, Zhaoteng; Feng, Shanshan; Tu, Bo; Zhao, Dongyuan

    2014-09-01

    The core-shell Au@resorcinol-formaldehyde (RF) nanospheres with multiple cores have been successfully synthesized by a modified Stöber method. After coating mesoporous silica and the calcination, the Au@meso-SiO2 hollow nanospheres with multiple gold cores can be obtained, which have a high surface area (∼537 m(2)/g) and uniform pore size (∼2.5 nm). The Au@meso-SiO2 hollow nanospheres can be used as a catalyst for the reduction of 4-nitrophenol by NaBH4 into 4-aminophenol, and exhibit excellent catalytic performance. PMID:24935190

  13. Layer-by-layer engineering fluorescent polyelectrolyte coated mesoporous silica nanoparticles as pH-sensitive nanocarriers for controlled release

    NASA Astrophysics Data System (ADS)

    Du, Pengcheng; Zhao, Xubo; Zeng, Jin; Guo, Jinshan; Liu, Peng

    2015-08-01

    Fluorescent core/shell composite has been fabricated by the layer-by-layer (LbL) assembly of the fluorescein isothiocyanate modified chitosan (CS-FITC) and sodium alginate (AL) onto the carboxyl modified mesoporous silica nanoparticles (MSN-COOH), followed by PEGylation. It exhibits stability in high salt-concentration media and the pH responsive fluorescent feature can be used for cell imaging. Furthermore, the modified MSN cores can enhance the DOX loading capacity and the multifunctional polyelectrolyte shell can adjust the drug release upon the media pH, showing a low leakage quantity at the neutral environment but significantly enhanced release at lower pH media mimicking the tumor environments. Therefore, the biocompatible fluorescent polyelectrolyte coated mesoporous silica nanoparticles (MSN-LBL-PEG) offer promise for tumor therapy.

  14. Mesoporous silica nanoparticles deliver DNA and chemicals into plants

    NASA Astrophysics Data System (ADS)

    Torney, François; Trewyn, Brian G.; Lin, Victor S.-Y.; Wang, Kan

    2007-05-01

    Surface-functionalized silica nanoparticles can deliver DNA and drugs into animal cells and tissues. However, their use in plants is limited by the cell wall present in plant cells. Here we show a honeycomb mesoporous silica nanoparticle (MSN) system with 3-nm pores that can transport DNA and chemicals into isolated plant cells and intact leaves. We loaded the MSN with the gene and its chemical inducer and capped the ends with gold nanoparticles to keep the molecules from leaching out. Uncapping the gold nanoparticles released the chemicals and triggered gene expression in the plants under controlled-release conditions. Further developments such as pore enlargement and multifunctionalization of these MSNs may offer new possibilities in target-specific delivery of proteins, nucleotides and chemicals in plant biotechnology.

  15. Thrombin-Responsive Gated Silica Mesoporous Nanoparticles As Coagulation Regulators.

    PubMed

    Bhat, Ravishankar; Ribes, Àngela; Mas, Núria; Aznar, Elena; Sancenón, Félix; Marcos, M Dolores; Murguía, Jose R; Venkataraman, Abbaraju; Martínez-Máñez, Ramón

    2016-02-01

    The possibility of achieving sophisticated actions in complex biological environments using gated nanoparticles is an exciting prospect with much potential. We herein describe new gated mesoporous silica nanoparticles (MSN) loaded with an anticoagulant drug and capped with a peptide containing a thrombin-specific cleavage site. When the coagulation cascade was triggered, active thrombin degraded the capping peptidic sequence and induced the release of anticoagulant drugs to delay the clotting process. The thrombin-dependent response was assessed and a significant increase in coagulation time in plasma from 2.6 min to 5 min was found. This work broadens the application of gated silica nanoparticles and demonstrates their ability to act as controllers in a complex scenario such as hemostasis. PMID:26794474

  16. White light emitting Mesoporous Carbon-Silica Nanocomposite

    NASA Astrophysics Data System (ADS)

    Matsumura, Akihiro; Ishii, Yosuke; Sato, Koji; Ishikawa, Yukari; Kawasaki, Shinji

    2011-05-01

    Visible photoluminescence (PL) from oxidized mesoporous carbon-silica nanocomposite (MPCS) prepared by the triconstituent co-assembly method is reported. White PL from MPCS was observed by naked eye at room temperature. Oxidation effects on carbon-silica bonding states and transmittance were investigated. PL intensity decreased with decreasing of carbon dangling bond density by oxidation at above 500 °C. The transmittance of MPCS at excitation and emission wavelengths increased with increasing of oxidation temperature. It is concluded that PL intensity is determined by the balance between PL related carbon density and transmittance. We proposed an additional wet oxidation that can increase PL intensity by the increase of transmittance under suppressing carbon desorption.

  17. Post-treatment and characterization of novel luminescent hybrid bimodal mesoporous silicas

    NASA Astrophysics Data System (ADS)

    Li, Yuzhen; Sun, Jihong; Wu, Xia; Lin, Li; Gao, Lin

    2010-08-01

    A novel luminescent hybrid bimodal mesoporous silicas (LHBMS) were synthesized via grafting 1,8-Naphthalic anhydride into the pore channels of bimodal mesoporous silicas (BMMs) for the first time. The resulting samples were characterized by powder X-ray diffraction (XRD), N 2 adsorption/desorption measurement, Fourier transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM), UV-vis absorption spectroscopy, and Photoluminescence spectroscopy (PL). The results show that 1,8-Naphthalic anhydride organic groups have been successfully introduced into the mesopores of the BMMs and the hybrid silicas are of bimodal mesoporous structure with the ordered small mesopores of around 3 nm and the large mesopores of uniform intra-nanoparticle. The excellent photoluminescent performance of LHBMS has a blue shift compared to that of 2-[3-(triethoxysilyl) propyl-1 H-Benz [de]isoquinoline-1, 3(2 H)-dione, suggesting the existence of the quantum confinement effectiveness.

  18. Organically Modified Silicas on Metal Nanowires

    PubMed Central

    2010-01-01

    Organically modified silica coatings were prepared on metal nanowires using a variety of silicon alkoxides with different functional groups (i.e., carboxyl groups, polyethylene oxide, cyano, dihydroimidazole, and hexyl linkers). Organically modified silicas were deposited onto the surface of 6-μm-long, ∼300-nm-wide, cylindrical metal nanowires in suspension by the hydrolysis and polycondensation of silicon alkoxides. Syntheses were performed at several ratios of tetraethoxysilane to an organically modified silicon alkoxide to incorporate desired functional groups into thin organosilica shells on the nanowires. These coatings were characterized using transmission electron microscopy, X-ray photoelectron spectroscopy, and infrared spectroscopy. All of the organically modified silicas prepared here were sufficiently porous to allow the removal of the metal nanowire cores by acid etching to form organically modified silica nanotubes. Additional functionality provided to the modified silicas as compared to unmodified silica prepared using only tetraethoxysilane precursors was demonstrated by chromate adsorption on imidazole-containing silicas and resistance to protein adsorption on polyethyleneoxide-containing silicas. Organically modified silica coatings on nanowires and other nano- and microparticles have potential application in fields such as biosensing or nanoscale therapeutics due to the enhanced properties of the silica coatings, for example, the prevention of biofouling. PMID:20715881

  19. Removal of malachite green dye from aqueous solution using mesoporous silica synthesized from 1-octyl-3-methylimidazolium chloride ionic liquid

    NASA Astrophysics Data System (ADS)

    Ekka, Basanti; Nayak, Soumitra Ranjan; Dash, Priyabrat; Patel, Raj Kishore

    2016-04-01

    In this research, mesoporous silica was synthesized via a modified sol-gel route using 1-octyl-3-methylimidazolium chloride and was employed to remove malachite green (MG) dye from aqueous solution. Subsequently, this material was characterized and identified by different techniques such as Fourier transform infrared spectroscopy (FT-IR), N2 adsorption-desorption method, scanning electron microscopy (SEM), and thermosgravimetric analysis (TGA). Unique properties such as high surface area and pore diameter, in addition to highly reactive atoms and presence of various functional groups make the mesoporous silica possible for efficient removal of malachite green (MG). In batch experimental set-up, optimum conditions for quantitative removal of MG by mesoporous silica was attained by varying different variables such as adsorbent dosage, initial dye concentration, contact time, and pH. Optimum values were set as pH of 8.0, 0.5 g of adsorbent at contact time of 120 min. The adsorption of MG follows the pseudo-second-order rate equation. Equilibrium data fitted well with the Freundlich model at all amount of adsorbent, while maximum adsorption capacity was 5.981 mg g-1 for 0.5 g mesoporous silica synthesized in IL.

  20. Facile Synthesis of Gold Nanospheres Modified by Positively Charged Mesoporous Silica, Loaded with Near-Infrared Fluorescent Dye, for in Vivo X-ray Computed Tomography and Fluorescence Dual Mode Imaging.

    PubMed

    Song, Ji-Tao; Yang, Xiao-Quan; Zhang, Xiao-Shuai; Yan, Dong-Mei; Wang, Zhao-Yang; Zhao, Yuan-Di

    2015-08-12

    We developed a simple and efficient method to synthesize a novel probe for both computed tomography (CT) and fluorescence imaging. Gold nanospheres were coated with positively charged mesoporous silica (Au@mSiO2-TTA) using a one-pot method to cohydrolyze quaternary ammonium silane and tetraethyl orthosilicate. Subsequently, IR-783, a negatively charged and water-soluble near-infrared fluorescent dye, was electrostatically adsorbed into the silica shell. Transmission electron microscopy imaging, X-ray powder diffraction, and energy dispersive X-ray spectroscopy indicated that Au@mSiO2-TTA had a clear core-shell structure, was monodisperse, had a large surface area (530 m2/g), and had a uniform pore size (2.2 nm). The mesoporous structure could effectively load fluorescent dye. After loading, the zeta potential of the nanoparticle dropped from 48 mV to 30 mV, and after additional modification with polyvinylpyrrolidone, it further reduced to 6 mV. Probe fluorescence was stable over time, and the probe was an effective CT contrast agent and as a near-infrared fluorescent probe. The half-life of the probe in the blood was 1.5 h, and the probe was mainly distributed in the spleen and liver 4 h after injection. Tissue sections showed that major organs were normal and without visible morphological changes, 6 days post injection, indicating the biocompatibility of the probe. PMID:26189815

  1. Facile preparation of mesoporous carbon-silica-coated graphene for the selective enrichment of endogenous peptides.

    PubMed

    Zhang, Quanqing; Zhang, Qinghe; Xiong, Zhichao; Wan, Hao; Chen, Xiaoting; Li, Hongmei; Zou, Hanfa

    2016-01-01

    A sandwich-like composite composed of ordered mesoporous carbon-silica shell-coated graphene (denoted as graphene@mSiO2-C) was prepared by an in-situ carbonation strategy. A mesoporous silica shell was synthesized by a sol-gel method, and cetyltrimethyl ammonium bromide inside the mesopores were in-situ carbonized as a carbon source to obtain a carbon-silica shell. The resulting mesoporous carbon-silica material with a sandwich structure possesses a high surface area (600 m(2) g(-1)), large pore volume (0.587 cm(3) g(-1)), highly ordered mesoporous pore (3 nm), and high carbon content (30%). This material shows not only high hydrophobicity of graphene and mesoporous carbon but also a hydrophilic silica framework that ensures excellent dispersibility in aqueous solution. The material can capture many more peptides from bovine serum albumin tryptic digests than mesoporous silica shell-coated graphene, demonstrating great enrichment efficiency for peptides. Furthermore, the prepared composite was applied to the enrichment of low-abundance endogenous peptides in human serum. Based on Matrix-Assisted Laser Desorption/ Ionization Time of Flight Mass Spectrometry identification, the graphene@mSiO2-C could efficiently size-exclude proteins and enriches the low-abundant peptides on the graphene and mesoporous carbon. And based on the LC-MS/MS results, 892 endogenous peptides were obtained by graphene@mSiO2-C, hinting at its great potential in peptides analysis. PMID:26695263

  2. Mesoporous silica nanoparticles for biomedical and catalytical applications

    SciTech Connect

    Sun, Xiaoxing

    2011-01-01

    Mesoporous silica materials, discovered in 1992 by the Mobile Oil Corporation, have received considerable attention in the chemical industry due to their superior textual properties such as high surface area, large pore volume, tunable pore diameter, and narrow pore size distribution. Among those materials, MCM-41, referred to Mobile Composition of Matter NO. 41, contains honeycomb liked porous structure that is the most common mesoporous molecular sieve studied. Applications of MCM-41 type mesoporous silica material in biomedical field as well as catalytical field have been developed and discussed in this thesis. The unique features of mesoporous silica nanoparticles were utilized for the design of delivery system for multiple biomolecules as described in chapter 2. We loaded luciferin into the hexagonal channels of MSN and capped the pore ends with gold nanoparticles to prevent premature release. Luciferase was adsorbed onto the outer surface of the MSN. Both the MSN and the gold nanoparticles were protected by poly-ethylene glycol to minimize nonspecific interaction of luciferase and keep it from denaturating. Controlled release of luciferin was triggered within the cells and the enzymatic reaction was detected by a luminometer. Further developments by varying enzyme/substrate pairs may provide opportunities to control cell behavior and manipulate intracellular reactions. MSN was also served as a noble metal catalyst support due to its large surface area and its stability with active metals. We prepared MSN with pore diameter of 10 nm (LP10-MSN) which can facilitate mass transfer. And we successfully synthesized an organo silane, 2,2'-Bipyridine-amide-triethoxylsilane (Bpy-amide-TES). Then we were able to functionalize LP10-MSN with bipyridinyl group by both post-grafting method and co-condensation method. Future research of this material would be platinum complexation. This Pt (II) complex catalyst has been reported for a C-H bond activation reaction as an

  3. Cholera toxin subunit B-mediated intracellular trafficking of mesoporous silica nanoparticles toward the endoplasmic reticulum

    NASA Astrophysics Data System (ADS)

    Walker, William Andrew

    In recent decades, pharmaceutical research has led to the development of numerous treatments for human disease. Nanoscale delivery systems have the potential to maximize therapeutic outcomes by enabling target specific delivery of these therapeutics. The intracellular localization of many of these materials however, is poorly controlled, leading to sequestration in degradative cellular pathways and limiting the efficacy of their payloads. Numerous proteins, particularly bacterial toxins, have evolved mechanisms to subvert the degradative mechanisms of the cell. Here, we have investigated a possible strategy for shunting intracellular delivery of encapsulated cargoes from these pathways by modifying mesoporous silica nanoparticles (MSNs) with the well-characterized bacterial toxin Cholera toxin subunit B (CTxB). Using established optical imaging methods we investigated the internalization, trafficking, and subcellular localization of our modified MSNs in an in vitro animal cell model. We then attempted to demonstrate the practical utility of this approach by using CTxB-modified mesoporous silica nanoparticles to deliver propidium iodide, a membrane-impermeant fluorophore.

  4. Mesoporous silica as carrier of antioxidant for food packaging materials

    NASA Astrophysics Data System (ADS)

    Buonocore, Giovanna Giuliana; Gargiulo, Nicola; Verdolotti, Letizia; Liguori, Barbara; Lavorgna, Marino; Caputo, Domenico

    2014-05-01

    Mesoporous silicas have been long recognized as very promising materials for the preparation of drug delivery systems. In this work SBA-15 mesoporous silica has been functionalized with amino-silane to be used as carrier of antioxidant compound in the preparation of active food packaging materials exhibiting tailored release properties. Active films have been prepared by loading the antioxidant tocopherol, the purely siliceous SBA-15 and the aminofunctionalized SBA-15 loaded with tocopherol into LDPE matrix trough a two-step process (mixing+extrusion). The aim of the present work is the study of the effect of the pore size and of the chemical functionality of the internal walls of the mesophase on the migration of tocopherol from active LDPE polymer films. Moreover, it has been proved that the addition of the active compound do not worsen the properties of the film such as optical characteristic and water vapor permeability, thus leading to the development of a material which could be favorably used mainly, but not exclusively, in the sector of food packaging.

  5. Colloidal mesoporous silica nanoparticles enhance the biological activity of resveratrol.

    PubMed

    Summerlin, Natalie; Qu, Zhi; Pujara, Naisarg; Sheng, Yong; Jambhrunkar, Siddharth; McGuckin, Michael; Popat, Amirali

    2016-08-01

    The naturally occurring polyphenol resveratrol (RES) has attracted increasing attention in recent years due to its antioxidant, anti-inflammatory, and anticancer activity. However, resveratrol's promising potential as a nutraceutical is hindered by its poor aqueous solubility, which limits its biological activity. Here we show that encapsulating resveratrol in colloidal mesoporous silica nanoparticles (MCM-48-RES) enhances its saturated solubility by ∼95% and increases its in vitro release kinetics compared to pure resveratrol. MCM-48-RES showed high loading capacity (20% w/w) and excellent encapsulation efficiency (100%). When tested against HT-29 and LS147T colon cancer cell lines, MCM-48-RES-mediated in vitro cell death was higher than that of pure resveratrol, mediated via the PARP and cIAP1 pathways. Finally, MCM-48-RES treatment also inhibited lipopolysaccharide-induced NF-κB activation in RAW264.7 cells, demonstrating improved anti-inflammatory activity. More broadly, our observations demonstrate the potential of colloidal mesoporous silica nanoparticles as next generation delivery carriers for hydrophobic nutraceuticals. PMID:27060664

  6. Complete magnesiothermic reduction reaction of vertically aligned mesoporous silica channels to form pure silicon nanoparticles

    NASA Astrophysics Data System (ADS)

    Kim, Kyoung Hwan; Lee, Dong Jin; Cho, Kyeong Min; Kim, Seon Joon; Park, Jung-Ki; Jung, Hee-Tae

    2015-03-01

    Owing to its simplicity and low temperature conditions, magnesiothermic reduction of silica is one of the most powerful methods for producing silicon nanostructures. However, incomplete reduction takes place in this process leaving unconverted silica under the silicon layer. This phenomenon limits the use of this method for the rational design of silicon structures. In this effort, a technique that enables complete magnesiothermic reduction of silica to form silicon has been developed. The procedure involves magnesium promoted reduction of vertically oriented mesoporous silica channels on reduced graphene oxides (rGO) sheets. The mesopores play a significant role in effectively enabling magnesium gas to interact with silica through a large number of reaction sites. Utilizing this approach, highly uniform, ca. 10 nm sized silicon nanoparticles are generated without contamination by unreacted silica. The new method for complete magnesiothermic reduction of mesoporous silica approach provides a foundation for the rational design of silicon structures.

  7. Complete magnesiothermic reduction reaction of vertically aligned mesoporous silica channels to form pure silicon nanoparticles

    PubMed Central

    Kim, Kyoung Hwan; Lee, Dong Jin; Cho, Kyeong Min; Kim, Seon Joon; Park, Jung-Ki; Jung, Hee-Tae

    2015-01-01

    Owing to its simplicity and low temperature conditions, magnesiothermic reduction of silica is one of the most powerful methods for producing silicon nanostructures. However, incomplete reduction takes place in this process leaving unconverted silica under the silicon layer. This phenomenon limits the use of this method for the rational design of silicon structures. In this effort, a technique that enables complete magnesiothermic reduction of silica to form silicon has been developed. The procedure involves magnesium promoted reduction of vertically oriented mesoporous silica channels on reduced graphene oxides (rGO) sheets. The mesopores play a significant role in effectively enabling magnesium gas to interact with silica through a large number of reaction sites. Utilizing this approach, highly uniform, ca. 10 nm sized silicon nanoparticles are generated without contamination by unreacted silica. The new method for complete magnesiothermic reduction of mesoporous silica approach provides a foundation for the rational design of silicon structures. PMID:25757800

  8. Modified silica-based heterogeneous catalysts for etherification of glycerol

    NASA Astrophysics Data System (ADS)

    Gholami, Zahra; Abdullah, Ahmad Zuhairi; Gholami, Fatemeh; Vakili, Mohammadtaghi

    2015-07-01

    The advent of mesoporous silicas such as MCM-41 has provided new opportunities for research into supported metal catalysis. The loading of metals into framework structures and particularly into the pores of porous molecular sieves, has long been of interest because of their potential catalytic activity. Stable heterogeneous mesoporous basic catalysts were synthesized by wet impregnation of MCM-41 with calcium nitrate and lanthanum nitrate. The surface and structural properties of the prepared catalysts were characterized using BET surface analysis, SEM and TEM. MCM-41 and modified MCM-41 were used in the solventless etherification of glycerol to produce diglycerol as the desired product. The reaction was performed at 250 °C for 8 h, and catalyst activity was evaluated. Catalytic etherification over the 20%Ca1.6La0.6/MCM-41 catalyst resulted in the highest glycerol conversion of 91% and diglycerol yield of 43%.

  9. Modified silica-based heterogeneous catalysts for etherification of glycerol

    SciTech Connect

    Gholami, Zahra; Abdullah, Ahmad Zuhairi Gholami, Fatemeh; Vakili, Mohammadtaghi

    2015-07-22

    The advent of mesoporous silicas such as MCM-41 has provided new opportunities for research into supported metal catalysis. The loading of metals into framework structures and particularly into the pores of porous molecular sieves, has long been of interest because of their potential catalytic activity. Stable heterogeneous mesoporous basic catalysts were synthesized by wet impregnation of MCM-41 with calcium nitrate and lanthanum nitrate. The surface and structural properties of the prepared catalysts were characterized using BET surface analysis, SEM and TEM. MCM-41 and modified MCM-41 were used in the solventless etherification of glycerol to produce diglycerol as the desired product. The reaction was performed at 250 °C for 8 h, and catalyst activity was evaluated. Catalytic etherification over the 20%Ca{sub 1.6}La{sub 0.6}/MCM-41 catalyst resulted in the highest glycerol conversion of 91% and diglycerol yield of 43%.

  10. Influence of spatial configurations on electromagnetic interference shielding of ordered mesoporous carbon/ordered mesoporous silica/silica composites

    PubMed Central

    Wang, Jiacheng; Zhou, Hu; Zhuang, Jiandong; Liu, Qian

    2013-01-01

    Ordered mesoporous carbons (OMCs), obtained by nanocasting using ordered mesoporous silicas (OMSs) as hard templates, exhibit unique arrangements of ordered regular nanopore/nanowire mesostructures. Here, we used nanocasting combined with hot-pressing to prepare 10 wt% OMC/OMS/SiO2 ternary composites possessing various carbon mesostructure configurations of different dimensionalities (1D isolated CS41 carbon nanowires, 2D hexagonal CMK-3 carbon, and 3D cubic CMK-1 carbon). The electric/dielectric properties and electromagnetic interference (EMI) shielding efficiency (SE) of the composites were influenced by spatial configurations of carbon networks. The complex permittivity and the EMI SE of the composites in the X-band frequency range decreased for the carbon mesostructures in the following order: CMK-3-filled > CMK-1-filled > CS41-filled. Our study provides technical directions for designing and preparing high-performance EMI shielding materials. Our OMC-based silica composites can be used for EMI shielding, especially in high-temperature or corrosive environments, owing to the high stability of the OMC/OMS fillers and the SiO2 matrix. Related shielding mechanisms are also discussed. PMID:24248277

  11. Influence of spatial configurations on electromagnetic interference shielding of ordered mesoporous carbon/ordered mesoporous silica/silica composites.

    PubMed

    Wang, Jiacheng; Zhou, Hu; Zhuang, Jiandong; Liu, Qian

    2013-01-01

    Ordered mesoporous carbons (OMCs), obtained by nanocasting using ordered mesoporous silicas (OMSs) as hard templates, exhibit unique arrangements of ordered regular nanopore/nanowire mesostructures. Here, we used nanocasting combined with hot-pressing to prepare 10 wt% OMC/OMS/SiO2 ternary composites possessing various carbon mesostructure configurations of different dimensionalities (1D isolated CS41 carbon nanowires, 2D hexagonal CMK-3 carbon, and 3D cubic CMK-1 carbon). The electric/dielectric properties and electromagnetic interference (EMI) shielding efficiency (SE) of the composites were influenced by spatial configurations of carbon networks. The complex permittivity and the EMI SE of the composites in the X-band frequency range decreased for the carbon mesostructures in the following order: CMK-3-filled > CMK-1-filled > CS41-filled. Our study provides technical directions for designing and preparing high-performance EMI shielding materials. Our OMC-based silica composites can be used for EMI shielding, especially in high-temperature or corrosive environments, owing to the high stability of the OMC/OMS fillers and the SiO2 matrix. Related shielding mechanisms are also discussed. PMID:24248277

  12. Influence of spatial configurations on electromagnetic interference shielding of ordered mesoporous carbon/ordered mesoporous silica/silica composites

    NASA Astrophysics Data System (ADS)

    Wang, Jiacheng; Zhou, Hu; Zhuang, Jiandong; Liu, Qian

    2013-11-01

    Ordered mesoporous carbons (OMCs), obtained by nanocasting using ordered mesoporous silicas (OMSs) as hard templates, exhibit unique arrangements of ordered regular nanopore/nanowire mesostructures. Here, we used nanocasting combined with hot-pressing to prepare 10 wt% OMC/OMS/SiO2 ternary composites possessing various carbon mesostructure configurations of different dimensionalities (1D isolated CS41 carbon nanowires, 2D hexagonal CMK-3 carbon, and 3D cubic CMK-1 carbon). The electric/dielectric properties and electromagnetic interference (EMI) shielding efficiency (SE) of the composites were influenced by spatial configurations of carbon networks. The complex permittivity and the EMI SE of the composites in the X-band frequency range decreased for the carbon mesostructures in the following order: CMK-3-filled > CMK-1-filled > CS41-filled. Our study provides technical directions for designing and preparing high-performance EMI shielding materials. Our OMC-based silica composites can be used for EMI shielding, especially in high-temperature or corrosive environments, owing to the high stability of the OMC/OMS fillers and the SiO2 matrix. Related shielding mechanisms are also discussed.

  13. Silica-based mesoporous nanobiomaterials as promoter of bone regeneration process.

    PubMed

    Shadjou, Nasrin; Hasanzadeh, Mohammad

    2015-11-01

    Silica-based mesostructured nanomaterials have emerged as a full family of biomaterials with tremendous potential to address the requirements for the bone regeneration process. This review focuses on more recent advances in bone regeneration process based on silica-based mesoporous biomaterials during 2012 to January 2015. In this review, we describe application of silica-based mesoporous mesostructured nanomaterials (possessing pore sizes in the range 2-50 nm) for the bone regeneration process. We summarize the preparation methods, the effect of mesopore templates and composition on the mesopore-structure characteristics, and different forms of these materials, including particles, fibers, spheres, scaffolds, and composites. The effect of structural and textural properties of mesoporous materials on the development of new biomaterials for treatment of different bone pathologies such as infection, osteoporosis, cancer, and so forth is discussed. In addition, silica-based mesoporous bioactive glass, as a potential drug/growth factor carrier, is reviewed, which includes the composition-structure-drug delivery relationship and the functional effect on the antibacteria and tissue-stimulation properties. Also, application of different mesoporous materials on construction of 3D macroporous scaffolds for bone tissue engineering was disused. Finally, this review discusses the possibility of covalently grafting different osteoinductive agents to the silica-based mesoporous scaffold surface that act as attracting signals for bone cells to promote the bone regeneration process. PMID:26011776

  14. Reaction mechanisms in irradiated, precipitated, and mesoporous silica.

    PubMed

    Dondi, D; Buttafava, A; Zeffiro, A; Bracco, S; Sozzani, P; Faucitano, A

    2013-04-25

    A matrix EPR spectroscopy study of the low temperature γ radiolysis of precipitated (Zeosil) and mesoporous high surface silica has afforded evidence of the formation of trapped H-atoms, H-atom centers, siloxy radicals ≡Si-O(•), anomalous silyl peroxy radicals ≡Si-OO(•) with reduced g tensor anisotropy, siloxy radical-cations (≡Si-O-Si≡)(+•), E' centers, and two species from Ge impurity. Coordination of peroxyl radicals with diamagnetic ≡Si(+) centers is proposed and tested by DFT computations in order to justify the observed g tensor. Coordination of H-atoms to ≡Si(+) centers is also proposed for the structure of the H-atom centers as an alternative model not requiring the intervention of Ge, Sn, or CO impurities. The DFT method has been employed to assess the electronic structure of siloxy radical-cations and its similarity with that of the carbon radical-cation analogues; the results have prompted a revision of the structures proposed in the literature for ST1 and ST2 centers. The comparison between the two types of silica has afforded evidence of different radiolysis mechanisms leading to a greater yield of trapped H-atoms and H-atom centers in zeosil silica, which is reckoned with the 4-fold greater concentration of silanol groups. Parallel radiolysis experiments carried out by using both types of silica with polybutadiene oligomers as adsorbate have afforded evidence of free valence and energy migration phenomena leading to irreversible linking of polybutadiene chains onto silica. Reaction mechanisms are proposed based on the detection of SiO2-bonded free radicals whose structure has been defined by EPR. PMID:23521082

  15. Impregnation of Fenofibrate on mesoporous silica using supercritical carbon dioxide.

    PubMed

    Bouledjouidja, Abir; Masmoudi, Yasmine; Van Speybroeck, Michiel; Schueller, Laurent; Badens, Elisabeth

    2016-02-29

    Low oral bioavailability can be circumvented by the formulation of the poorly water soluble drug in ordered mesoporous silica (OMS-L-7). Fenofibrate is an orally administered, poorly water-soluble active pharmaceutical ingredient (API), used clinically to lower lipid levels. Fenofibrate was loaded into silica using two methods: incipient wetness and supercritical impregnation. This study investigates the impact of loading and the impact of varying supercritical carbon dioxide (scCO2) processing conditions. The objective is to enhance Fenofibrate loading into silica while reducing degree of the drug crystallinity, so as to increase the drug's dissolution rate and its bioavailability. The comparison of both impregnation processes was made in terms of impregnation yields and duration as well as physical characterization of the drug. While incipient wetness method led to a Fenofibrate loading up to 300 mgdrug/gsilica in 48 h of impregnation, the supercritical impregnation method yielded loading up to 485 mgdrug/gsilica in 120 min of impregnation duration, at 16 MPa and 308 K, with a low degree of crystallinity (about 1%) comparable to the crystallinity observed via the solvent method. In addition to the enhancement of impregnation efficiency, the supercritical route provides a solvent-free alternative for impregnation. PMID:26732521

  16. Synthesis of mesoporous silica materials from municipal solid waste incinerator bottom ash.

    PubMed

    Liu, Zhen-Shu; Li, Wen-Kai; Huang, Chun-Yi

    2014-05-01

    Incinerator bottom ash contains a large amount of silica and can hence be used as a silica source for the synthesis of mesoporous silica materials. In this study, the conditions for alkaline fusion to extract silica from incinerator bottom ash were investigated, and the resulting supernatant solution was used as the silica source for synthesizing mesoporous silica materials. The physical and chemical characteristics of the mesoporous silica materials were analyzed using BET, XRD, FTIR, SEM, and solid-state NMR. The results indicated that the BET surface area and pore size distribution of the synthesized silica materials were 992 m2/g and 2-3.8 nm, respectively. The XRD patterns showed that the synthesized materials exhibited a hexagonal pore structure with a smaller order. The NMR spectra of the synthesized materials exhibited three peaks, corresponding to Q(2) [Si(OSi)2(OH)2], Q(3) [Si(OSi)3(OH)], and Q(4) [Si(OSi)4]. The FTIR spectra confirmed the existence of a surface hydroxyl group and the occurrence of symmetric Si-O stretching. Thus, mesoporous silica was successfully synthesized from incinerator bottom ash. Finally, the effectiveness of the synthesized silica in removing heavy metals (Pb2+, Cu2+, Cd2+, and Cr2+) from aqueous solutions was also determined. The results showed that the silica materials synthesized from incinerator bottom ash have potential for use as an adsorbent for the removal of heavy metals from aqueous solutions. PMID:24656468

  17. One-step synthesis of degradable T1-FeOOH functionalized hollow mesoporous silica nanocomposites from mesoporous silica spheres

    NASA Astrophysics Data System (ADS)

    Peng, Yung-Kang; Tseng, Yu-Jui; Liu, Chien-Liang; Chou, Shang-Wei; Chen, Yu-Wei; Tsang, S. C. Edman; Chou, Pi-Tai

    2015-01-01

    The combination of a hollow mesoporous structure and a magnetic resonance (MR) contrast agent has shown its potential in simultaneous drug delivery and cell tracking applications. However, the preparation of this kind of nanocomposite is complicated and usually takes several days, which is unsuitable for scaled-up production. To overcome these hurdles, we report herein a facile method to synthesize iron oxide hydroxide functionalized hollow mesoporous silica spheres (FeOOH/HMSS) in a one-step manner. By carefully controlling the reaction kinetics of K2FeO4 in water, the gram-scale production of FeOOH/HMSS can be readily achieved at 60 °C for as short as 30 min. Most importantly, this synthetic process is also cost-effective and eco-friendly in both the precursor (K2FeO4 and H2O) and the product (FeOOH). The mechanism for the formation of a hollow structure was carefully investigated, which involves the synergetic effect of the surfactant CTAB and the side product KOH. Having outstanding biocompatibility, these degradable nanocolloids also demonstrate their feasibility in in vitro/vivo MR imaging and in vitro drug delivery.The combination of a hollow mesoporous structure and a magnetic resonance (MR) contrast agent has shown its potential in simultaneous drug delivery and cell tracking applications. However, the preparation of this kind of nanocomposite is complicated and usually takes several days, which is unsuitable for scaled-up production. To overcome these hurdles, we report herein a facile method to synthesize iron oxide hydroxide functionalized hollow mesoporous silica spheres (FeOOH/HMSS) in a one-step manner. By carefully controlling the reaction kinetics of K2FeO4 in water, the gram-scale production of FeOOH/HMSS can be readily achieved at 60 °C for as short as 30 min. Most importantly, this synthetic process is also cost-effective and eco-friendly in both the precursor (K2FeO4 and H2O) and the product (FeOOH). The mechanism for the formation of a

  18. Mesoporous silica nanoparticles in tissue engineering--a perspective.

    PubMed

    Rosenholm, Jessica Maria; Zhang, Jixi; Linden, Mika; Sahlgren, Cecilia

    2016-02-01

    In this review, we summarize the latest developments and give a perspective on future applications of mesoporous silica nanoparticles (MSNs) in regenerative medicine. MSNs constitute a flexible platform for controlled delivery of drugs and imaging agents in tissue engineering and stem cell therapy. We highlight the recent advances in applying MSNs for controlled drug delivery and stem cell tracking. We touch upon novel functions of MSNs in real time imaging of drug release and biological function, and as tools to control the chemical and mechanical environment of stem cells. We discuss the need for novel model systems for studying biofunctionality and biocompatibility of MSNs, and how the interdisciplinary activities within the field will advance biotechnology research. PMID:26784861

  19. Porous thin films of functionalized mesoporous silica nanoparticles.

    PubMed

    Kobler, Johannes; Bein, Thomas

    2008-11-25

    The synthesis of extremely small mesoporous silica nanoparticles via a specific co-condensation process with phenyl groups is demonstrated. The suspensions are ideally suited for the production of nanoscale thin films by spin-coating. Thanks to the small particle size and the resulting low surface roughness, the films show excellent optical qualities and exhibit good diffusion properties and a highly accessible pore system. The availability of such homogeneous porous thin films made it possible to use ellipsometric porosimetry (EP) as a convenient method to determine the effective porosity of the films on their original support without destroying it. It was possible to record sorption isotherms of the thin films with ellipsometry and to correlate the data with nitrogen sorption data of dried powders of the same material. The thin films showed very low refractive indices of around 1.2. PMID:19206399

  20. Mesoporous-Silica-Functionalized Nanoparticles for Drug Delivery.

    PubMed

    Giret, Simon; Wong Chi Man, Michel; Carcel, Carole

    2015-09-28

    The ever-growing interest for finding efficient and reliable methods for treatment of diseases has set a precedent for the design and synthesis of new functional hybrid materials, namely porous nanoparticles, for controlled drug delivery. Mesoporous silica nanoparticles (MSNPs) represent one of the most promising nanocarriers for drug delivery as they possess interesting chemical and physical properties, thermal and mechanical stabilities, and are biocompatibile. In particular, their easily functionalizable surface allows a large number of property modifications further improving their efficiency in this field. This Concept article deals with the advances on the novel methods of functionalizing MSNPs, inside or outside the pores, as well as within the walls, to produce efficient and smart drug carriers for therapy. PMID:26250991

  1. Improved gene transfer with histidine-functionalized mesoporous silica nanoparticles.

    PubMed

    Brevet, David; Hocine, Ouahiba; Delalande, Anthony; Raehm, Laurence; Charnay, Clarence; Midoux, Patrick; Durand, Jean-Olivier; Pichon, Chantal

    2014-08-25

    Mesoporous silica nanoparticles (MSN) were functionalized with aminopropyltriethoxysilane (MSN-NH2) then L-histidine (MSN-His) for pDNA delivery in cells and in vivo. The complexation of pDNA with MSN-NH2 and MSN-His was first studied with gel shift assay. pDNA complexed with MSN-His was better protected from DNase degradation than with MSN-NH2. An improvement of the transfection efficiency in cells was observed with MSN-His/pDNA compared to MSN-NH2/pDNA, which could be explained by a better internalization of MSN-His. The improvement of the transfection efficiency with MSN-His was also observed for gene transfer in Achilles tendons in vivo. PMID:24853464

  2. Silicalites and Mesoporous Silica Nanoparticles for photodynamic therapy.

    PubMed

    Hocine, Ouahiba; Gary-Bobo, Magali; Brevet, David; Maynadier, Marie; Fontanel, Simon; Raehm, Laurence; Richeter, Sébastien; Loock, Bernard; Couleaud, Pierre; Frochot, Céline; Charnay, Clarence; Derrien, Gaëlle; Smaïhi, Monique; Sahmoune, Amar; Morère, Alain; Maillard, Philippe; Garcia, Marcel; Durand, Jean-Olivier

    2010-12-15

    The synthesis of silicalites and Mesoporous Silica Nanoparticles (MSN), which covalently incorporate original water-soluble photosensitizers for PDT applications is described. PDT was performed on MDA-MB-231 breast cancer cells. All the nanoparticles showed significant cell death after irradiation, which was not correlated with (1)O(2) quantum yield of the nanoparticles. Other parameters are involved and in particular the surface and shape of the nanoparticles which influence the pathway of endocytosis. Functionalization with mannose was necessary to obtain the best results with PDT due to an active endocytosis of mannose-functionalized nanoparticles. The quantity of mannose on the surface should be carefully adjusted as a too high amount of mannose impairs the phototoxicity of the nanoparticles. Fluorescein was also encapsulated in MCM-41 type MSN in order to localize the nanoparticles in the organelles of the cells by confocal microscopy. The MSN were localized in lysosomes after active endocytosis by mannose receptors. PMID:20934496

  3. Breakable mesoporous silica nanoparticles for targeted drug delivery.

    PubMed

    Maggini, Laura; Cabrera, Ingrid; Ruiz-Carretero, Amparo; Prasetyanto, Eko A; Robinet, Eric; De Cola, Luisa

    2016-04-01

    "Pop goes the particle". Here we report on the preparation of redox responsive mesoporous organo-silica nanoparticles containing disulfide (S-S) bridges (ss-NPs) that, even upon the exohedral grafting of targeting ligands, retained their ability to undergo structural degradation, and increase their local release activity when exposed to a reducing agent. This degradation could be observed also inside glioma C6 cancer cells. Moreover, when anticancer drug-loaded pristine and derivatized ss-NPs were fed to glioma C6 cells, the responsive hybrids were more effective in their cytotoxic action compared to non-breakable particles. The possibility of tailoring the surface functionalization of this hybrid, yet preserving its self-destructive behavior and enhanced drug delivery properties, paves the way for the development of effective biodegradable materials for in vivo targeted drug delivery. PMID:26974603

  4. Antibacterial mesoporous molecular sieves modified with polymeric N-halamine.

    PubMed

    Wang, Yingfeng; Li, Lin; Liu, Ying; Ren, Xuehong; Liang, Jie

    2016-12-01

    In this research, a new kind of porous N-halamine material with high antibacterial efficacies was prepared. Poly [5,5-dimethyl-3-(3'-triethoxysilylpropyl)-hydantoin] (PSPH), an N-halamine precursor, was synthesized and grafted onto the surface of mesoporous molecular sieves (SBA-15). The mesoporous molecular sieves modified with the N-halamine polymer could be rendered biocidal upon exposure to dilute household bleach. The modified mesoporous molecular sieves were characterized by SEM, TEM, FTIR, XPS, TGA, XRD and BET analysis. It was found that the PSPH has been successfully grafted on the surface of mesoporous molecular sieves, and the morphology and structure of the modified mesoporous molecular sieves were slightly affected. The N-halamine modified mesoporous molecular sieves showed excellent antibacterial property, and inactivated 100% of S. aureus and E. coli O157:H7 with 8.05 and 7.92 log reductions within 1min of contact, respectively. The modified SBA-15 with high-antibacterial efficiency has potential application in water treatment and biomaterials areas. PMID:27612805

  5. Hollow mesoporous silica nanoparticles for intracellular delivery of fluorescent dye

    PubMed Central

    2011-01-01

    In this study, hollow mesoporous silica nanoparticles (HMSNs) were synthesized using the sol-gel/emulsion approach and its potential application in drug delivery was assessed. The HMSNs were characterized, by transmission electron microscopy (TEM), Scanning Electron Microscopy (SEM), nitrogen adsorption/desorption and Brunauer-Emmett-Teller (BET), to have a mesoporous layer on its surface, with an average pore diameter of about 2 nm and a surface area of 880 m2/g. Fluorescein isothiocyanate (FITC) loaded into these HMSNs was used as a model platform to assess its efficacy as a drug delivery tool. Its release kinetic study revealed a sequential release of FITC from the HMSNs for over a period of one week when soaked in inorganic solution, while a burst release kinetic of the dye was observed just within a few hours of soaking in organic solution. These FITC-loaded HMSNs was also found capable to be internalized by live human cervical cancer cells (HeLa), wherein it was quickly released into the cytoplasm within a short period of time after intracellular uptake. We envision that these HMSNs, with large pores and high efficacy to adsorb chemicals such as the fluorescent dye FITC, could serve as a delivery vehicle for controlled release of chemicals administered into live cells, opening potential to a diverse range of applications including drug storage and release as well as metabolic manipulation of cells. PMID:21208421

  6. Self-Assembly and Compartmentalization of Nanozymes in Mesoporous Silica-Based Nanoreactors.

    PubMed

    Huang, Yanyan; Lin, Youhui; Ran, Xiang; Ren, Jinsong; Qu, Xiaogang

    2016-04-11

    Herein, to mimic complex natural system, polyelectrolyte multilayer (PEM)-coated mesoporous silica nanoreactors were used to compartmentalize two different artificial enzymes. PEMs coated on the surface of mesoporous silica could serve as a permeable membrane to control the flow of molecules. When assembling hemin on the surface of mesoporous silica, the hemin-based mesoporous silica system possessed remarkable peroxidase-like activity, especially at physiological pH, and could be recycled more easily than traditional graphene-hemin nanocompounds. The hope is that these new findings may pave the way for exploring novel nanoreactors to achieve compartmentalization of nanozymes and applying artificial cascade catalytic systems to mimic cell organelles or important biochemical transformations. PMID:26934043

  7. Aminopropyl-modified mesoporous molecular sieves as efficient adsorbents for removal of auxins

    NASA Astrophysics Data System (ADS)

    Moritz, Michał; Geszke-Moritz, Małgorzata

    2015-03-01

    In the present study, mesoporous siliceous materials grafted with 3-aminopropyltriethoxysilane (APTES) were examined as sorbents for removal of chosen plant growth factors (auxins) such as 1-naphthaleneacetic acid (NAA), indole-3-acetic acid (IAA) and indole-3-butyric acid (IBA). Four different types of mesoporous molecular sieves including SBA-15, PHTS, SBA-16 and MCF have been prepared via non-ionic surfactant-assisted soft templating method. Silica molecular sieves were thoroughly characterized by nitrogen adsorption-desorption analysis, powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FT-IR). The maximum adsorption capacity (Qmax) for NAA, IAA and IBA was in the range from 51.0 to 140.8 mg/g and from 4.3 to 7.3 mg/g for aminopropyl-modified adsorbents and pure silicas, respectively. The best adsorption performance was observed for IAA entrapment using both APTES-functionalized SBA-15 and MCF matrices (Qmax of 140.8 and 137.0 mg/g, respectively) which can be ascribed to their larger pore volumes and pore diameters. Moreover, these silicas were characterized by the highest adsorption efficiency exceeding 90% at low pollutant concentration. The experimental points for adsorption of plant growth factors onto aminopropyl-modified mesoporous molecular sieves fitted well to the Langmuir equation.

  8. Ultrasound assisted morphological control of mesoporous silica with improved lysozyme adsorption.

    PubMed

    Sun, Shumin; Wang, Shen; Wang, Peiyuan; Wu, Qiong; Fang, Shaoming

    2015-03-01

    The morphological control of mesoporous silica without any additives has attracted much attention. Discrete rod-like and string-of-beads like mesoporous SBA-15 can be achieved under ultrasound irradiation without changing the composition of synthesis system. The smaller particles of SBA-15 showed improved lysozyme immobilization capacity and higher adsorption rate over conventional rope-like SBA-15. PMID:25150609

  9. Ionic liquid decorated mesoporous silica nanoparticles: a new high-performance hybrid electrolyte for lithium batteries.

    PubMed

    Li, Yang; Wong, Ka-Wai; Ng, Ka-Ming

    2016-03-10

    We report a novel hybrid electrolyte based on mesoporous silica nanoparticles decorated with an ionic liquid, which exhibits a superior lithium ion transference number of >0.8, and an excellent electrochemical window of >5 V with attractive ionic conductivity. The insights obtained pave a new way for the preparation of high-performance electrolytes with mesoporous structures. PMID:26926805

  10. A bio-catalytically driven Janus mesoporous silica cluster motor with magnetic guidance.

    PubMed

    Ma, Xing; Sanchez, Samuel

    2015-03-28

    A bio-catalytic Janus motor based on the mesoporous silica cluster (JMSC) is fabricated. Chemically conjugated catalase triggers the decomposition of H2O2 to produce driving force by bubble propulsion, while a metallic (Ni) coating layer allows for magnetic guidance of the motor. The JMSC motor can act as a delivery vehicle with cargo loading inside its mesopores. PMID:25407318

  11. Breakable mesoporous silica nanoparticles for targeted drug delivery

    NASA Astrophysics Data System (ADS)

    Maggini, Laura; Cabrera, Ingrid; Ruiz-Carretero, Amparo; Prasetyanto, Eko A.; Robinet, Eric; de Cola, Luisa

    2016-03-01

    ``Pop goes the particle''. Here we report on the preparation of redox responsive mesoporous organo-silica nanoparticles containing disulfide (S-S) bridges (ss-NPs) that, even upon the exohedral grafting of targeting ligands, retained their ability to undergo structural degradation, and increase their local release activity when exposed to a reducing agent. This degradation could be observed also inside glioma C6 cancer cells. Moreover, when anticancer drug-loaded pristine and derivatized ss-NPs were fed to glioma C6 cells, the responsive hybrids were more effective in their cytotoxic action compared to non-breakable particles. The possibility of tailoring the surface functionalization of this hybrid, yet preserving its self-destructive behavior and enhanced drug delivery properties, paves the way for the development of effective biodegradable materials for in vivo targeted drug delivery.``Pop goes the particle''. Here we report on the preparation of redox responsive mesoporous organo-silica nanoparticles containing disulfide (S-S) bridges (ss-NPs) that, even upon the exohedral grafting of targeting ligands, retained their ability to undergo structural degradation, and increase their local release activity when exposed to a reducing agent. This degradation could be observed also inside glioma C6 cancer cells. Moreover, when anticancer drug-loaded pristine and derivatized ss-NPs were fed to glioma C6 cells, the responsive hybrids were more effective in their cytotoxic action compared to non-breakable particles. The possibility of tailoring the surface functionalization of this hybrid, yet preserving its self-destructive behavior and enhanced drug delivery properties, paves the way for the development of effective biodegradable materials for in vivo targeted drug delivery. Electronic supplementary information (ESI) available: Full experimental procedures, additional SEM and TEM images of particles, complete UV-Vis and PL-monitored characterization of the breakdown of

  12. A cationic surfactant assisted selective etching strategy to hollow mesoporous silica spheres.

    PubMed

    Fang, Xiaoliang; Chen, Cheng; Liu, Zhaohui; Liu, Pengxin; Zheng, Nanfeng

    2011-04-01

    Hollow mesoporous silica spheres have recently attracted increasing attention. However, effective synthesis of uniform hollow mesoporous spheres with controllable well-defined pore structures for fundamental research and practical applications has remained a significant challenge. In this work, a straightforward and effective "cationic surfactant assisted selective etching" synthetic strategy was developed for the preparation of high-quality hollow mesoporous silica spheres with either wormhole-like or oriented mesoporous shell. The as-prepared hollow mesoporous silica spheres have large surface area, high pore volume, and controllable structure parameters. Our experiments demonstrated that cationic surfactant plays critical roles in forming the hollow mesoporous structure. A formation mechanism involving the etching of solid SiO(2) accelerated by cationic surfactant followed by the redeposition of dissolved silica species directed by cationic surfactant is proposed. Furthermore, the strategy can be extended as a general strategy to transform silica-coated composite materials into yolk-shell structures with either wormhole-like or oriented mesoporous shell. PMID:21305093

  13. Structure and Luminescence Properties of Eu3+-Doped Cubic Mesoporous Silica Thin Films

    PubMed Central

    2010-01-01

    Eu3+ ions-doped cubic mesoporous silica thin films with a thickness of about 205 nm were prepared on silicon and glass substrates using triblock copolymer as a structure-directing agent using sol–gel spin-coating and calcination processes. X-ray diffraction and transmission electron microscopy analysis show that the mesoporous silica thin films have a highly ordered body-centered cubic mesoporous structure. High Eu3+ ion loading and high temperature calcination do not destroy the ordered cubic mesoporous structure of the mesoporous silica thin films. Photoluminescence spectra show two characteristic emission peaks corresponding to the transitions of5D0-7F1 and 5D0-7F2 of Eu3+ ions located in low symmetry sites in mesoporous silica thin films. With the Eu/Si molar ratio increasing to 3.41%, the luminescence intensity of the Eu3+ ions-doped mesoporous silica thin films increases linearly with increasing Eu3+ concentration. PMID:20672132

  14. Silylated mesoporous silica membranes on polymeric hollow fiber supports: synthesis and permeation properties.

    PubMed

    Kim, Hyung-Ju; Brunelli, Nicholas A; Brown, Andrew J; Jang, Kwang-Suk; Kim, Wun-gwi; Rashidi, Fereshteh; Johnson, Justin R; Koros, William J; Jones, Christopher W; Nair, Sankar

    2014-10-22

    We report the synthesis and organic/water separation properties of mesoporous silica membranes, supported on low-cost and scalable polymeric (polyamide-imide) hollow fibers, and modified by trimethylsilylation with hexamethyldisilazane. Thin (∼1 μm) defect-free membranes are prepared, with high room-temperature gas permeances (e.g., 20,000 GPU for N2). The membrane morphology is characterized by multiple techniques, including SEM, TEM, XRD, and FT-ATR spectroscopy. Silylation leads to capping of the surface silanol groups in the mesopores with trimethylsilyl groups, and does not affect the integrity of the mesoporous silica structure and the underlying hollow fiber. The silylated membranes are evaluated for pervaporative separation of ethanol (EtOH), methylethyl ketone (MEK), ethyl acetate (EA), iso-butanol (i-BuOH), and n-butanol (n-BuOH) from their dilute (5 wt %) aqueous solutions. The membranes show separation factors in the range of 4-90 and high organic fluxes in the range of 0.18-2.15 kg m(-2) h(-1) at 303 K. The intrinsic selectivities (organic/water permeability ratios) of the silylated membranes at 303 K are 0.33 (EtOH/water), 0.5 (MEK/water), 0.25 (EA/water), 1.25 (i-BuOH/water), and 1.67 (n-BuOH/water) respectively, in comparison to 0.05, 0.015, 0.005, 0.08, and 0.14 for the unmodified membranes. The silylated membranes allow upgradation of water/organics feeds to permeate streams with considerably higher organics content. The selective and high-flux separation is attributed to both the organophilic nature of the modified mesopores and the large effective pore size. Comparison with other organics/water separation membranes reveals that the present membranes show promise due to high flux, use of scalable and low-cost supports, and good separation factors that can be further enhanced by tailoring the mesopore silylation chemistry. PMID:25255051

  15. Triblock siloxane copolymer surfactant: template for spherical mesoporous silica with a hexagonal pore ordering.

    PubMed

    Stébé, M J; Emo, M; Forny-Le Follotec, A; Metlas-Komunjer, L; Pezron, I; Blin, J L

    2013-02-01

    Ordered mesoporous silica materials with a spherical morphology have been prepared for the first time through the cooperative templating mechanism (CTM) by using a silicone triblock copolymer as template. The behavior of the pure siloxane copolymer amphiphile in water was first investigated. A direct micellar phase (L(1)) and a hexagonal (H(1)) liquid crystal were found. The determination of the structural parameters by SAXS measurements leads us to conclude that in the hexagonal liquid crystal phase a part of the ethylene oxide group is not hydrated as observed for the micelles. Mesoporous materials were then synthesized from the cooperative templating mechanism. The recovered materials were characterized by SAXS measurements, nitrogen adsorption-desorption analysis, and transmission and scanning electron microscopy. The results clearly evidence that one can control the morphology and the nanostructuring of the resulting material by modifying the synthesis parameters. Actually, highly ordered mesoporous materials with a spherical morphology have been obtained with a siloxane copolymer/tetramethoxysilane molar ratio of 0.10 after hydrothermal treatment at 100 °C. Our study also supports the fact that the interactions between micelles and the hydrolyzed precursor are one of the key parameters governing the formation of ordered mesostructures through the cooperative templating mechanism. Indeed, we have demonstrated that when the interactions between micelles are important, only wormhole-like structures are recovered. PMID:23305163

  16. Investigation of heterogeneous asymmetric dihydroxylation over OsO{sub 4}-(QN){sub 2}PHAL catalysts of functionalized bimodal mesoporous silica with ionic liquid

    SciTech Connect

    Qiu, Shenjie; Sun, Jihong; Li, Yuzhen; Gao, Lin

    2011-08-15

    Highlights: {yields} Functionalized bimodal mesoporous silica with MTMSPIm{sup +}Cl{sup -}. {yields} Mesoporous catalyst immobilized with OsO{sub 4}-(QN){sub 2}PHAL. {yields} Catalysts for asymmetric dihydroxylation reaction with high yield and enatioselectivity. {yields} Recyclable catalysts. -- Abstract: A novel synthesis of the functionalized bimodal mesoporous silica with ionic liquid (FBMMs) was performed. After grafting 1-methyl-3-(trimethoxysilyl)propylimidazolium chloride onto the surface of bimodal mesoporous silicas, 1,4-bis(9-O-quininyl)phthalazine ((QN){sub 2}-PHAL) and K{sub 2}Os(OH){sub 4}.2H{sub 2}O were immobilized onto the modified FBMMs by adsorption or ionic exchange methods, and then, the asymmetric dihydroxylation reaction was carried out by using solid catalysts. Techniques such as X-ray diffraction, Fourier Transform Infrared spectroscopy, N{sub 2} adsorption and desorption were employed to characterize their structure and properties. The results showed that the mesoporous ordering degree of bimodal mesoporous silica decreased after functionalization and immobilization of OsO{sub 4}-(QN){sub 2}PHAL. Being very effective in asymmetric dihydroxylation with high yield and enantioselectivity, the prepared heterogeneous solid catalyst could be recycled for five times with little loss of enantioselectivity, with comparison of those results obtained in homophase system. Moreover, the effect of Osmium catalyst on asymmetric dihydroxylation was investigated.

  17. Membrane interactions of mesoporous silica nanoparticles as carriers of antimicrobial peptides.

    PubMed

    Braun, Katharina; Pochert, Alexander; Lindén, Mika; Davoudi, Mina; Schmidtchen, Artur; Nordström, Randi; Malmsten, Martin

    2016-08-01

    Membrane interactions are critical for the successful use of mesoporous silica nanoparticles as delivery systems for antimicrobial peptides (AMPs). In order to elucidate these, we here investigate effects of nanoparticle charge and porosity on AMP loading and release, as well as consequences of this for membrane interactions and antimicrobial effects. Anionic mesoporous silica particles were found to incorporate considerable amounts of the cationic AMP LLGDFFRKSKEKIGKEFKRIVQRIKDFLRNLVPRTES (LL-37), whereas loading is much lower for non-porous or positively charged silica nanoparticles. Due to preferential pore localization, anionic mesoporous particles, but not the other particles, protect LL-37 from degradation by infection-related proteases. For anionic mesoporous nanoparticles, membrane disruption is mediated almost exclusively by peptide release. In contrast, non-porous silica particles build up a resilient LL-37 surface coating due to their higher negative surface charge, and display largely particle-mediated membrane interactions and antimicrobial effects. For positively charged mesoporous silica nanoparticles, LL-37 incorporation promotes the membrane binding and disruption displayed by the particles in the absence of peptide, but also causes toxicity against human erythrocytes. Thus, the use of mesoporous silica nanoparticles as AMP delivery systems requires consideration of membrane interactions and selectivity of both free peptide and the peptide-loaded nanoparticles, the latter critically dependent on nanoparticle properties. PMID:27174622

  18. High performance of phosphonate-functionalized mesoporous silica for U(VI) sorption from aqueous solution.

    PubMed

    Yuan, Li-Yong; Liu, Ya-Lan; Shi, Wei-Qun; Lv, Yu-Long; Lan, Jian-Hui; Zhao, Yu-Liang; Chai, Zhi-Fang

    2011-07-28

    The renaissance of nuclear energy promotes increasing basic research on the separation and enrichment of nuclear fuel associated radionuclides. Herein, we report the first study for developing mesoporous silica functionalized with phosphonate (NP10) as a sorbent for U(VI) sorption from aqueous solution. The mesoporous silica was synthesized by co-condensation of diethylphosphatoethyltriethoxysilane (DPTS) and tetraethoxysilane (TEOS), using cationic surfactant cetyltrimethylammonium bromide (CTAB) as the template. The synthesized silica nanoparticles were observed to possess a mesoporous structure with a uniform pore diameter of 2.7 nm, and to have good stability and high efficiency for U(VI) sorption from aqueous solution. A maximum sorption capacity of 303 mg g(-1) and fast equilibrium time of 30 min were achieved under near neutral conditions at room temperature. The adsorbed U(VI) can be easily desorbed by using 0.1 mol L(-1) HNO(3), and the reclaimed mesoporous silica can be reused with no decrease of sorption capacity. In addition, the preconcentration of U(VI) from a 100 mL aqueous solution using the functionalized mesoporous silica was also studied. The preconcentration factor was found to be as high as 100, suggesting the vast opportunities of this kind of mesoporous silica for the solid-phase extraction and enrichment of U(VI). PMID:21681327

  19. Mesoporous silica nanotubes hybrid membranes for functional nanofiltration

    NASA Astrophysics Data System (ADS)

    El-Safty, Sherif A.; Shahat, Ahmed; Mekawy, Moataz; Nguyen, Hoa; Warkocki, Wojciech; Ohnuma, Masato

    2010-09-01

    The development of nanofiltration systems would greatly assist in the production of well-defined particles and biomolecules with unique properties. We report a direct, simple synthesis of hexagonal silica nanotubes (NTs), which vertically aligned inside anodic alumina membranes (AAM) by means of a direct templating method of microemulsion phases with cationic surfactants. The direct approach was used as soft templates for predicting ordered assemblies of surfactant/silica composites through strong interactions within AAM pockets. Thus, densely packed NTs were successfully formed in the entirety of the AAM channels. These silica NTs were coated with layers of organic moieties to create a powerful technique for the ultrafine filtration. The resulting modified-silica NTs were chemically robust and showed affinity toward the transport of small molecular particles. The rigid silica NTs inside AAM channels had a pore diameter of <= 4 nm and were used as ultrafine filtration systems for noble metal nanoparticles (NM NPs) and semiconductor nanocrystals (SC NCs) fabricated with a wide range of sizes (1.0-50 nm) and spherical/pyramidal morphologies. Moreover, the silica NTs hybrid membranes were also found to be suitable for separation of biomolecules such as cytochrome c (CytC). Importantly, this nanofilter design retains high nanofiltration efficiency of NM NPs, SC NCs and biomolecules after a number of reuse cycles. Such retention is crucial in industrial applications.

  20. Reversing Cancer Multidrug Resistance in Xenograft Models via Orchestrating Multiple Actions of Functional Mesoporous Silica Nanoparticles.

    PubMed

    Yang, Debin; Wang, Tingfang; Su, Zhigui; Xue, Lingjing; Mo, Ran; Zhang, Can

    2016-08-31

    A multistimuli responsive drug delivery system (DDS) based on sulfhydryl and amino-cofunctionalized mesoporous silica nanoparticles (SH/NH2-MSNs) has been developed, in which the multifunctional hyaluronic acid (HA) derivatives were grafted onto the SH/NH2-MSNs by disulfide bonds for targeting delivery, controlling drug release and reversing multidrug resistance (MDR). The doxorubicin (Dox) loaded multifunctional HA derivatives modified mesoporous silica nanoparticles (Dox/HHS-MSNs) were enzyme and redox sensitive, which could respond to the intracellular stimuli of hyaluronidase (HAase) and glutathione (GSH) successively and prevent drug leakage before reaching the tumor tissues. The cellular uptake experiments showed that Dox/HHS-MSNs were vulnerable to be endocytosed into the Dox-resistant human breast adenocarcinoma (MCF-7/ADR) cells, efficiently realized the endolysosomal escape and remained in the cytoplasm. Because of orchestrating multiple actions above including active targeting, endolysosomal escape and efficient multilevel drug release, Dox/HHS-MSNs could induce the strongest apoptosis and cytotoxicity of MCF-7/ADR cells. Furthermore, a series of in vivo studies on MCF-7/ADR tumor-bearing xenograft mouse models demonstrated that Dox/HHS-MSNs possessed the enhanced tumor-targeting capacity and the best therapeutic efficacy to reverse cancer MDR. PMID:27420116

  1. Hybrid lipid-capped mesoporous silica for stimuli-responsive drug release and overcoming multidrug resistance.

    PubMed

    Han, Ning; Zhao, Qinfu; Wan, Long; Wang, Ying; Gao, Yikun; Wang, Pu; Wang, Zhanyou; Zhang, Jinghai; Jiang, Tongying; Wang, Siling

    2015-02-11

    Multidrug resistance (MDR) is known to be a great obstruction to successful chemotherapy, and considerable efforts have been devoted to reverse MDR including designing various functional drug delivery systems. In this study, hybrid lipid-capped mesoporous silica nanoparticles (LTMSNs), aimed toward achieving stimuli-responsive drug release to circumvent MDR, were specially designated for drug delivery. After modifying MSNs with hydrophobic chains through disulfide bond on the surface, lipid molecules composing polymer d-α-tocopherol polyethylene glycol 1000 succinate (TPGS) with molar ratio of 5:1 were subsequently added to self-assemble into a surrounded lipid layer via hydrophobic interaction acting as smart valves to block the pore channels of carrier. The obtained LTMSNs had a narrow size distribution of ca. 190 nm and can be stably dispersed in body fluids, which may ensure a long circulating time and ideal enhanced permeability and retention effect. Doxorubicin (DOX) was chosen as a model drug to be encapsulated into LTMSNs. Results showed that this hybrid lipid-capped mesoporous silica drug delivery system can achieve redox and pH-responsive release of DOX, thereby avoiding the premature leakage of drug before reaching the specific site and releasing DOX within the cancerous cells. Owing to the presence of TPGS-containing lipid layer, LTMSNs-DOX exhibited higher uptake efficiency, cytotoxicity, and increased intracellular accumulation in resistant MCF-7/Adr cells compared with DOX solution, proving to be a promising vehicle to realize intracellular drug release and inhibit drug efflux. PMID:25584634

  2. [Preparation and stability of β-carotene loaded using mesoporous silica nanoparticles as carriers system].

    PubMed

    Liu, Jing; Ren, Zhi-hui; Wang, Hai-yuan; Jin, Xing-hua

    2015-09-01

    1,3,5-Trimethylbenzene (1,3,5-TMB) was used as the pore-enlarging modifier to expand the pore size of MCM-41 (mobil company of matter) mesoporous silica nanoparticles. The solvent impregnation method was adopted to assemble non-water-soluble β-carotene into the pore channel of MCM-41. The MCM-41 and drug assemblies were characterized by TEM, FT-IR, elemental analysis and N2 adsorption-desorption. The results showed that MCM-41 has good sphericity and regular pore structure. The research also investigated the optimal loading time, the drug loading and the vitro stability of the β-carotene. As a drug carrier, the modified MCM-41 showing a shorter drug loading time, the drug loading as high as 85.58% and the stability of β-carotene in drug assemblies has improved. The study of this new formulation provides a new way for β-carotene application. PMID:26983203

  3. Sub-1-micron mesoporous silica particles functionalized with cyclodextrin derivative for rapid enantioseparations on ultra-high pressure liquid chromatography.

    PubMed

    Ai, Feng; Li, Laisheng; Ng, Siu-Choon; Tan, Timothy Thatt Yang

    2010-11-26

    Mesoporous silica particles of relatively uniform sub-1-micron size (0.6-0.9 μm) were successfully prepared by a modified synthesis strategy and applied in chiral separation in an ultra-high pressure liquid chromatography system. These particles were prepared via a ternary surfactant system (Pluronic P123, F127 and hexadecyltrimethyl-ammonium bromide) and subsequently derivatized with perphenylcarbamoylated-β-cyclodextrin moieties. The mesoporous silica particles, despite their submicron size, enabled low back-pressure operation on an ultra-high pressure liquid chromatography system at a maximum flow rate of 2 ml/min. In addition, the particles possessed high surface area (480 m(2)/g) and thus afforded high cyclodextrin derivative loading (32 μmol/g), demonstrating rapid enantioseparation and good resolution of 6 basic and neutral racemates. PMID:21030027

  4. Magnetic mesoporous silica nanoparticles: fabrication and their laccase immobilization performance.

    PubMed

    Wang, Feng; Guo, Chen; Yang, Liang-rong; Liu, Chun-Zhao

    2010-12-01

    Newly large-pore magnetic mesoporous silica nanoparticles (MMSNPs) with wormhole framework structures were synthesized for the first time by using tetraethyl orthosilicate as the silica source and amine-terminated Jeffamine surfactants as template. Iminodiacerate was attached on these MMSNPs through a silane-coupling agent and chelated with Cu(2+). The Cu(2+)-chelated MMSNPs (MMSNPs-CPTS-IDA-Cu(2+)) showed higher adsorption capacity of 98.1 mg g(-1)-particles and activity recovery of 92.5% for laccase via metal affinity adsorption in comparison with MMSNPs via physical adsorption. The Michaelis constant (K(m)) and catalytic constant (k(cat)) of laccase immobilized on the MMSNPs-CPTS-IDA-Cu(2+) were 3.28 mM and 155.4 min(-1), respectively. Storage stability and temperature endurance of the immobilized laccase on MMSNPs-CPTS-IDA-Cu(2+) increased significantly, and the immobilized laccase retained 86.6% of its initial activity after 10 successive batch reactions operated with magnetic separation. PMID:20655206

  5. Mechanical Stability of Templated Mesoporous Silica Thin Films

    SciTech Connect

    Williford, Rick E.; Li, Xiaohong S.; Addleman, Raymond S.; Fryxell, Glen E.; Baskaran, Suresh; Birnbaum, Jerome C.; Coyle, Christopher A.; Zemanian, Thomas S.; Wang, Chong M.; Courtney, Andrea R.

    2005-11-07

    Mesoporous silica thin films about 1 micron thick were prepared by spin casting using several organic templates that provide a range of pore structures from disordered (sponge-like) to more ordered (honeycomb-like) 2D hexagonal arrays. Nanoindentation measurements indicate that the elastic modulus (E), and thus the density, of the pore wall material are substantially lower than for fused silica. The corresponding lower dielectric constant for pore walls was used to calculate film porosities (P) with recent correlations from the literature. Curve fits to the standard modulus vs. porosity correlation, E/Eporewall=(1-P)n, for the films gave lower n=2.2 for the honeycomb-like film with higher E, but higher n=2.5 for the sponge-like film with lower E, in contrast to theoretical expectations (n=2 for sponge-like and n=3 for honeycomb-like). Although the dielectric constant depends primarily on first-order structural information (P), the elastic modulus of these structurally imperfect films required second-order (pore wall thickness/diameter ratio) and third-order (pore connectivity) parameters to resolve the data. The power law exponent n can vary continuously, depending on the details of the mesostructure, and should not be assumed a' priori unless justified by detailed structural information

  6. Preparation of Mesoporous Silica Templated Metal Nanowire Films on Foamed Nickel Substrates

    SciTech Connect

    Campbell, Roger; Kenik, Edward A; Bakker, Martin; Havrilla, George; Montoya, Velma; Shamsuzzoha, Mohammed

    2006-01-01

    A method has been developed for the formation of high surface area nanowire films on planar and three-dimensional metal electrodes. These nanowire films are formed via electrodeposition into a mesoporous silica film. The mesoporous silica films are formed by a sol-gel process using Pluronic tri-block copolymers to template mesopore formation on both planar and three-dimensional metal electrodes. Surface area increases of up to 120-fold have been observed in electrodes containing a templated film when compared to the same types of electrodes without the templated film.

  7. Utilization of a By-product Produced from Oxidative Desulfurization Process over Cs-Mesoporous Silica Catalysts

    SciTech Connect

    Kim, Hyeonjoo; Jeong, Kwang Eun; Jeong, Soon-Yong; Park, Young-Kwon; Kim, Do Heui; Jeon, Jong Ki

    2011-02-28

    We investigated the use of Cs-mesoporous silica catalysts to upgrade a by-product of oxidative desulfurization (ODS). Cs-mesoporous silica catalysts were chaeacterized through N2 adsorption, XRD, CO2-temperature-programmed desorption, and XRF. Cs-mesoporous silica prepared by the direct incorporation method showed higher catalytic performance than a Cs/MCM-41 catalyst by impregnation method for the catalytic decomposition of sulfone compounds produced from ODS process.

  8. Mesoporous CLEAs-silica composite microparticles with high activity and enhanced stability

    PubMed Central

    Cui, Jiandong; Jia, Shiru; Liang, Longhao; Zhao, Yamin; Feng, Yuxiao

    2015-01-01

    A novel enzyme immobilization approach was used to generate mesoporous enzymes-silica composite microparticles by co-entrapping gelatinized starch and cross-linked phenylalanine ammonia lyase (PAL) aggregates (CLEAs) containing gelatinized starch into biomemitic silica and subsequently removing the starch by α-amylase treatment. During the preparation process, the gelatinzed starch served as a pore-forming agent to create pores in CLEAs and biomimetic silica. The resulting mesoporous CLEAs-silica composite microparticles exhibited higher activity and stability than native PAL, conventional CLEAs, and PAL encapsulated in biomimetic silica. Furthermore, the mesoporous CLEAs-silica composite microparticles displayed good reusability due to its suitable size and mechanical properties, and had excellent stability for storage. The superior catalytic performances were attributed to the combinational unique structure from the intra-cross-linking among enzyme aggregates and hard mesoporous silica shell, which not only decreased the enzyme-support negative interaction and mass-transfer limitations, but also improved the mechanical properties and monodispersity. This approach will be highly beneficial for preparing various bioactive mesoporous composites with excellent catalytic performance. PMID:26374188

  9. Post-treatment and characterization of novel luminescent hybrid bimodal mesoporous silicas

    SciTech Connect

    Li Yuzhen; Sun Jihong; Wu Xia; Lin Li; Gao Lin

    2010-08-15

    A novel luminescent hybrid bimodal mesoporous silicas (LHBMS) were synthesized via grafting 1,8-Naphthalic anhydride into the pore channels of bimodal mesoporous silicas (BMMs) for the first time. The resulting samples were characterized by powder X-ray diffraction (XRD), N{sub 2} adsorption/desorption measurement, Fourier transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM), UV-vis absorption spectroscopy, and Photoluminescence spectroscopy (PL). The results show that 1,8-Naphthalic anhydride organic groups have been successfully introduced into the mesopores of the BMMs and the hybrid silicas are of bimodal mesoporous structure with the ordered small mesopores of around 3 nm and the large mesopores of uniform intra-nanoparticle. The excellent photoluminescent performance of LHBMS has a blue shift compared to that of 2-[3-(triethoxysilyl) propyl-1 H-Benz [de]isoquinoline-1, 3(2 H)-dione, suggesting the existence of the quantum confinement effectiveness. - Graphical abstract: A novel luminescent hybrid bimodal mesoporous silicas was synthesized via modification and then grafting with 1, 8-Naphthalic anhydride, which would be strong potential application in the photoluminescent fields.

  10. Synthesis and microwave absorbing properties of FeNi alloy incorporated ordered mesoporous carbon-silica nanocomposite

    NASA Astrophysics Data System (ADS)

    Li, Guoxian; Guo, Yunxia; Sun, Xin; Wang, Tao; Zhou, Jianhua; He, Jianping

    2012-11-01

    Ordered mesoporous carbon-silica/FeNi nanocomposite were prepared by a sol-gel method and following sintering process. The electromagnetic parameters were measured in the 0.5-18 GHz range. Compared with ordered mesoporous carbon-silica composite, the permittivity of ordered mesoporous carbon-silica/FeNi nanocomposite decreases, while the permeability almost remains unchanged. The optimal reflection loss of ordered mesoporous carbon-silica/FeNi nanocomposite can reach -45.6 dB at 11.1 GHz for a layer thickness of 3.0 mm. The enhanced microwave absorption of the mesoporous carbon-silica/FeNi nanocomposite is due to better balance between the complex permittivity and permeability, geometrical effect, as well as multiple reflections by the ordered mesoporous structure.

  11. Curcumin loaded mesoporous silica: an effective drug delivery system for cancer treatment.

    PubMed

    Kotcherlakota, Rajesh; Barui, Ayan Kumar; Prashar, Sanjiv; Fajardo, Mariano; Briones, David; Rodríguez-Diéguez, Antonio; Patra, Chitta Ranjan; Gómez-Ruiz, Santiago

    2016-03-01

    In the present study, we report the delivery of anti-cancer drug curcumin to cancer cells using mesoporous silica materials. A series of mesoporous silica material based drug delivery systems (S2, S4 and S6) were first designed and developed through the amine functionalization of KIT-6, MSU-2 and MCM-41 followed by the loading of curcumin. The curcumin loaded materials were characterized with several physico-chemical techniques and thoroughly screened on cancer cells to evaluate their in vitro drug delivery efficacy. All the curcumin loaded silica materials exhibited higher cellular uptake and inhibition of cancer cell viability compared to pristine curcumin. The effective internalization of curcumin in cancer cells through the mesoporous silica materials initiated the generation of intracellular reactive oxygen species and the down regulation of poly ADP ribose polymerase (PARP) enzyme levels compared to free curcumin leading to the activation of apoptosis. This study shows that the anti-cancer activity of curcumin can be potentiated by loading onto mesoporous silica materials. Therefore, we strongly believe that mesoporous silica based curcumin loaded drug delivery systems may have future potential applications for the treatment of cancers. PMID:26674254

  12. A reversible light-operated nanovalve on mesoporous silica nanoparticles

    NASA Astrophysics Data System (ADS)

    Tarn, Derrick; Ferris, Daniel P.; Barnes, Jonathan C.; Ambrogio, Michael W.; Stoddart, J. Fraser; Zink, Jeffrey I.

    2014-02-01

    Two azobenzene α-cyclodextrin based nanovalves are designed, synthesized and assembled on mesoporous silica nanoparticles. Under aqueous conditions, the cyclodextrin cap is tightly bound to the azobenzene moiety and capable of holding back loaded cargo molecules. Upon irradiation with a near-UV light laser, trans to cis-photoisomerization of azobenzene initiates a dethreading process, which causes the cyclodextrin cap to unbind followed by the release of cargo. The addition of a bulky stopper to the end of the stalk allows this design to be reversible; complete dethreading of cyclodextrin as a result of unbinding with azobenzene is prevented as a consequence of steric interference. As a result, thermal relaxation of cis- to trans-azobenzene allows for the rebinding of cyclodextrin and resealing of the nanopores, a process which entraps the remaining cargo. Two stalks were designed with different lengths and tested with alizarin red S and propidium iodide. No cargo release was observed prior to light irradiation, and the system was capable of multiuse. On/off control was also demonstrated by monitoring the release of cargo when the light stimulus was applied and removed, respectively.Two azobenzene α-cyclodextrin based nanovalves are designed, synthesized and assembled on mesoporous silica nanoparticles. Under aqueous conditions, the cyclodextrin cap is tightly bound to the azobenzene moiety and capable of holding back loaded cargo molecules. Upon irradiation with a near-UV light laser, trans to cis-photoisomerization of azobenzene initiates a dethreading process, which causes the cyclodextrin cap to unbind followed by the release of cargo. The addition of a bulky stopper to the end of the stalk allows this design to be reversible; complete dethreading of cyclodextrin as a result of unbinding with azobenzene is prevented as a consequence of steric interference. As a result, thermal relaxation of cis- to trans-azobenzene allows for the rebinding of cyclodextrin and

  13. Bio-templated synthesis of highly ordered macro-mesoporous silica material for sustained drug delivery

    NASA Astrophysics Data System (ADS)

    Qu, Fengyu; Lin, Huiming; Wu, Xiang; Li, Xiaofeng; Qiu, Shilun; Zhu, Guangshan

    2010-05-01

    The bimodal porous structured silica materials consisting of macropores with the diameter of 5-20 μm and framework-like mesopores with the diameter of 4.7-6.0 nm were prepared using natural Manchurian ash and mango linin as macropored hard templates and P123 as mesopore soft templates, respectively. The macroporous structures of Manchurian ash and mango linin were replicated with the walls containing highly ordered mesoporous silica as well. As-synthesized dual porous silica was characterized by scanning electron microscope (SEM), powder X-ray diffraction (XRD), transmission electron microscope (TEM) and nitrogen adsorption/desorption, fourier transform IR (FTIR) spectroscopy, and thermo-gravimetric analyzer (TGA). Ibuprofen (Ibu) was employed as a model drug and the release profiles showed that the dual porous material had a sustained drug delivery capability. And such highly ordered dual pore silica materials may have potential applications for bimolecular adsorption/separation and tissue repairing.

  14. Label-Free Luminescent Mesoporous Silica Nanoparticles for Imaging and Drug Delivery

    PubMed Central

    Chen, Hongmin; Zhen, Zipeng; Tang, Wei; Todd, Trever; Chuang, Yen-Jun; Wang, Lianchun; Pan, Zhengwei; Xie, Jin

    2013-01-01

    We report herein a straightforward and label-free approach to prepare luminescent mesoporous silica nanoparticles. We found that calcination at 400 °C can grant mesoporous organosilica nanoparticles with strong fluorescence of great photo- and chemical stability. The luminescence is found to originate from the carbon dots generated from the calcination, rather than the defects in the silica matrix as was believed previously. The calcination does not impact the particles' abilities to load drugs and conjugate to biomolecules. In a proof-of-concept study, we demonstrated that doxorubicin (Dox) can be efficiently encapsulated into these fluorescent mesoporous silica nanoparticles. After coupled to c(RGDyK), the nanoconjugates can efficiently home to tumors through interactions with integrin αvβ3 overexpressed on the tumor vasculature. This calcination-induced luminescence is expected to find wide applications in silica-based drug delivery, nanoparticle coating, and immunofluorescence imaging. PMID:24052805

  15. Preparation of bio-compatible boron nanoparticles and novel mesoporous silica nanoparticles for bio-applications

    NASA Astrophysics Data System (ADS)

    Gao, Zhe

    This dissertation presents the synthesis and characterization of several novel inorganic and hybrid nanoparticles, including the bio-compatible boron nanoparticles (BNPs) for boron neutron capture therapy (BNCT), tannic acid-templated mesoporous silica nanoparticles and degradable bridged silsesquioxane silica nanoparticles. Chapter 1 provides background information of BNCT and reviews the development of design and synthesizing silica nanoparticles and the study of silica material degradability. Chapter 2 describes the preparation and characterization of dopamine modified BNPs and the preliminary cell study of them. The BNPs were first produced via ball milling, with fatty acid on the surface to stabilize the combustible boron elements. This chapter will mainly focus on the ligand-exchange strategy, in which the fatty acids were replaced by non-toxic dopamines in a facile one-pot reaction. The dopamine-coated BNPs (DA-BNPs) revealed good water dispersibility and low cytotoxicity. Chapter 3 describes the synthesis of tannic acid template mesoporous silica nanoparticles (TA-TEOS SiNPs) and their application to immobilize proteins. The monodispersed TA SiNPs with uniform pore size up to approximately 13 nm were produced by utilizing tannic acid as a molecular template. We studied the influence of TA concentration and reaction time on the morphology and pore size of the particles. Furthermore, the TA-TEOS particles could subsequently be modified with amine groups allowing them to be capable of incorporating imaging ligands and other guest molecules. The ability of the TA-TEOS particles to store biomolecules was preliminarily assessed with three proteins of different charge characteristics and dimensions. The immobilization of malic dehydrogenase on TA-TEOS enhanced the stability of the enzyme at room temperature. Chapter 4 details the synthesis of several bridged silsesquioxanes and the preparation of degradable hybrid SiNPs via co-condensation of bridged

  16. o-Vanillin functionalized mesoporous silica - coated magnetite nanoparticles for efficient removal of Pb(II) from water

    NASA Astrophysics Data System (ADS)

    Culita, Daniela C.; Simonescu, Claudia Maria; Patescu, Rodica-Elena; Dragne, Mioara; Stanica, Nicolae; Oprea, Ovidiu

    2016-06-01

    o-Vanillin functionalized mesoporous silica - coated magnetite (Fe3O4@MCM-41-N-oVan) was synthesized and fully characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, N2 adsorption-desorption technique and magnetic measurements. The capacity of Fe3O4@MCM-41-N-oVan to adsorb Pb(II) from aqueous solutions was evaluated in comparison with raw mesoporous silica - coated magnetite (Fe3O4@MCM-41) and amino - modified mesoporous silica coated magnetite (Fe3O4@MCM-41-NH2). The effect of adsorption process parameters such us pH, contact time, initial Pb(II) concentration was also investigated. The adsorption data were successfully fitted with the Langmuir model, exhibiting a maximum adsorption capacity of 155.71 mg/g at pH=4.4 and T=298 K. The results revealed that the adsorption rate was very high at the beginning of the adsorption process, 80-90% of the total amount of Pb(II) being removed within the first 60 min, depending on the initial concentration. The results of the present work suggest that Fe3O4@MCM-41-N-oVan is a suitable candidate for the separation of Pb(II) from contaminated water.

  17. Mesoporous silica sub-micron spheres as drug dissolution enhancers: Influence of drug and matrix chemistry on functionality and stability.

    PubMed

    Brigo, Laura; Scomparin, Elisa; Galuppo, Marco; Capurso, Giovanni; Ferlin, Maria Grazia; Bello, Valentina; Realdon, Nicola; Brusatin, Giovanna; Morpurgo, Margherita

    2016-02-01

    Mesoporous silica particles prepared through a simplified Stöber method and low temperature solvent promoted surfactant removal are evaluated as dissolution enhancers for poorly soluble compounds, using a powerful anticancer agent belonging to pyrroloquinolinones as a model for anticancer oral therapy, and anti-inflammatory ibuprofen as a reference compound. Mesoporous powders composed of either pure silica or silica modified with aminopropyl residues are produced. The influence of material composition and drug chemical properties on drug loading capability and dissolution enhancement are studied. The two types of particles display similar size, surface area, porosity, erodibility, drug loading capability and stability. An up to 50% w/w drug loading is reached, showing correlation between drug concentration in adsorption medium and content in the final powder. Upon immersion in simulating body fluids, immediate drug dissolution occurred, allowing acceptor solutions to reach concentrations equal to or greater than drug saturation limits. The matrix composition influenced drug solution maximal concentration, complementing the dissolution enhancement generated by a mesoporous structure. This effect was found to depend on both matrix and drug chemical properties allowing us to hypothesise general prediction behaviour rules. PMID:26652411

  18. Synthesis of mesoporous silica-coated magnetic nanoparticles modified with 4-amino-3-hydrazino-5-mercapto-1,2,4-triazole and its application as Cu(II) adsorbent from aqueous samples

    NASA Astrophysics Data System (ADS)

    Wondracek, Marcos Henrique P.; Jorgetto, Alexandre Oliveira; Silva, Adrielli Cristina P.; Ivassechen, Janaíne do Rocio; Schneider, José Fabián; Saeki, Margarida Juri; Pedrosa, Valber Albuquerque; Yoshito, Walter Kenji; Colauto, Fabiano; Ortiz, Wilson A.; Castro, Gustavo Rocha

    2016-03-01

    This study presents an alternative, rapid, and environment-friendly synthesis procedure of a magnetic core-shell mesoporous SBA-15 silica composite, its functionalization with 4-amino-3-hydrazino-5-mercapto-1,2,4-triazole (Purpald), and its application in dispersive solid-phase microextraction (DSPME) for Cu(II) from water. The materials were characterized through magnetization measurements, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR) of 29Si and 13C, elemental analysis, and surface area measurements. FTIR and NMR analyses indicated the presence of the ligand on the functionalized material and that it was coupled through a Csbnd S bond. TEM images clearly show that the magnetite core particles were effectively coated with a silica shell. The material presented a surface area of 287.99 m2 g-1 and an average pore diameter of approximately 15.1 nm. The material had its point of zero charge (PZC) determined (6.17) and its adsorption capacity was evaluated as a function of time, pH, and metal concentration. Dynamic adsorption equilibrium was reached in 120 min, and it had a good correlation with the pseudo-second-order kinetic model (r2 = 0.9997). The maximum experimental adsorption capacity (0.0786 mmol g-1) and the value calculated by the linearized Langmuir model (0.0799 mmol g-1) are very approximate, indicating the formation of a monolayer over the material. Furthermore, the material proved to be very stable, because their adsorption capacity remained greater than 95% even after 10 cycles of adsorption/desorption. A high enrichment factor of 98.1-fold was observed, indicating that this material is suitable for the preconcentration of trace Cu(II) ions before analysis through flame atomic absorption spectrometry (FAAS).

  19. Mesoporous Silica-Supported Amidozirconium-Catalyzed Carbonyl Hydroboration

    DOE PAGESBeta

    Eedugurala, Naresh; Wang, Zhuoran; Chaudhary, Umesh; Nelson, Nicholas; Kandel, Kapil; Kobayashi, Takeshi; Slowing, Igor I.; Pruski, Marek; Sadow, Aaron D.

    2015-11-04

    The hydroboration of aldehydes and ketones using a silica-supported zirconium catalyst is reported. Reaction of Zr(NMe2)4 and mesoporous silica nanoparticles (MSN) provides the catalytic material Zr(NMe2)n@MSN. Exhaustive characterization of Zr(NMe2)n@MSN with solid-state (SS)NMR and infrared spectroscopy, as well as through reactivity studies, suggests its surface structure is primarily ≡SiOZr(NMe2)3. The presence of these nitrogen-containing zirconium sites is supported by 15N NMR spectroscopy, including natural abundance 15N NMR measurements using dynamic nuclear polarization (DNP) SSNMR. The Zr(NMe2)n@MSN material reacts with pinacolborane (HBpin) to provide Me2NBpin and the material ZrH/Bpin@MSN that is composed of interacting surface-bonded zirconium hydride and surface-bonded borane ≡SiOBpinmore » moieties in an approximately 1:1 ratio, as well as zirconium sites coordinated by dimethylamine. The ZrH/Bpin@MSN is characterized by 1H/2H and 11B SSNMR and infrared spectroscopy and through its reactivity with D2. The zirconium hydride material or the zirconium amide precursor Zr(NMe2)n@MSN catalyzes the selective hydroboration of aldehydes and ketones with HBpin in the presence of functional groups that are often reduced under hydroboration conditions or are sensitive to metal hydrides, including olefins, alkynes, nitro groups, halides, and ethers. Remarkably, this catalytic material may be recycled without loss of activity at least eight times, and air-exposed materials are catalytically active. These supported zirconium centers are robust catalytic sites for carbonyl reduction and that surface-supported, catalytically reactive zirconium hydride may be generated from zirconium-amide or zirconium alkoxide sites.« less

  20. Dual-cargo selectively controlled release based on a pH-responsive mesoporous silica system.

    PubMed

    Gui, Wanyuan; Wang, Wenqian; Jiao, Xiangyu; Chen, Lifeng; Wen, Yongqiang; Zhang, Xueji

    2015-02-23

    A pH-controlled delivery system based on mesoporous silica nanoparticles (MSNs) was constructed for dual-cargo selective release. To achieve a better controlled-release effect, a modified sol-gel method was employed to obtain MSNs with tunable particle and pore sizes. The systems selectively released different kinds of cargo when stimulated by different pH values. At the lower pH value (pH 2.0) only one kind of cargo was released from the MSNs, whereas at a higher pH value (pH 7.0) only the other kind of cargo was released from the MSNs. The multi-cargo delivery system has brought the concept of selective release to new advances in the field of functional nanodevices and allows more accurate and controllable delivery of specific cargoes, which is expected to have promising applications in nanomedicine. PMID:25492672

  1. Catalytic performance of subtilisin immobilized without covalently attachment on surface-functionalized mesoporous silica materials

    NASA Astrophysics Data System (ADS)

    Murai, K.; Nonoyama, T.; Ando, F.; Kato, K.

    2011-10-01

    Mesoporous silica (MPS) materials were synthesized using cetyltrimethylammonium bromide or amphiphilic pluronic polymer P123 (EO20PO70EO20) as structure-directing agent. MPS samples were characterized by FE-SEM and N2 adsorption-desorption isotherms, respectively. Subtilisin from Bacillus licheiformis (4.1 × 7.8 × 3.7 nm) was easily immobilized by a direct one-step immobilization process onto MPS with different organo-functinalized surfaces. However, enzyme immobilized on MPS modified with 3-mercaptopropyl group strongly reduced its enantioselectivity. Denaturation temperature of immobilized subtilisin shifted to a high temperature compared to free-enzyme. These biocatalysts on MPS particles retained about 30% of original activity even after 5 cycles of recycle use.

  2. Advances in Peptide Functionalization on Mesoporous Silica Nanoparticles for Controlled Drug Release.

    PubMed

    Hu, Jing-Jing; Xiao, Dong; Zhang, Xian-Zheng

    2016-07-01

    During the last decade, using versatile, promising, and fascinating mesoporous silica nanoparticles (MSNs) as site-specific and stimuli-responsive drug delivery systems (DDSs) has received concentrated research interest. As one of the most attractive surface modification units, peptides have inherent bioactivity, biodegradability and biocompatibility. Recent progresses in the utilization of versatile peptides for surface functionalization of MSNs to achieve cell-specific targeting, fluorescence imaging, and intracellular diagnosis and treatment of tumors are summarized in this review. The various functional peptides decorated on the MSNs are introduced and classified into three types, including targeting peptides, stimuli-responsive peptides and multifunctional chimeric peptides. The limitations and challenges of peptide modified MSNs and their potential applications are further discussed. PMID:27152737

  3. Mixed surfactants-directed the mesoporous silica materials with various morphologies and structures

    SciTech Connect

    Lin Huiming; Qu Fengyu; Wu Xiang; Xue Ming; Zhu Guangshan; Qiu Shilun

    2011-06-15

    A new mixed surfactants system using alkyl carboxylic acids and quaternized poly[bis(2-chloroethyl)ether-alt-1,3-bis[3-(dimethylamino)propyl] urea] (PEPU) as the co-template was used to synthesize mesoporous silica materials with various morphologies and structures, including flakes, regular spheres, nanoparticles, and tube-spheres. The cationic polymer connected the anionic surfactant micelle to the anionic polysilicate species to induce the synthesis of the mesoporous silica materials. The structure and property of the surfactant and the cationic polymer determined the formation of mesoporous silica, and also had a signification influence on the morphology and structure of the final materials. To further explore the possible formation mechanism of these mesoporous materials, zeta potential was utilized to evaluate the interaction between the anionic surfactant and the cationic co-template. In addition, the structure, morphology, and porosity of these materials were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N{sub 2} adsorption-desorption measurements. - Graphical abstract: A new mixed surfactants system using alkyl carboxylic acids and PEPU as the co-template was used to synthesize mesoporous silica materials with various morphologies and structures. Highlights: {yields}A new mixed surfactants system induced the mesoporous silica materials with various morphologies and structure. > It is a development of the type S{sup -}N{sup +}I{sup -} route of the mesoporous formation. > Zeta potential was utilized to evaluate the interaction between the anionic surfactant and the cationic co-template. > The property and amount of surfactant and polymer determined the formation of the mesoporous materials.

  4. Near Infrared Light-Powered Janus Mesoporous Silica Nanoparticle Motors.

    PubMed

    Xuan, Mingjun; Wu, Zhiguang; Shao, Jingxin; Dai, Luru; Si, Tieyan; He, Qiang

    2016-05-25

    We describe fuel-free, near-infrared (NIR)-driven Janus mesoporous silica nanoparticle motors (JMSNMs) with diameters of 50, 80, and 120 nm. The Janus structure of the JMSNMs is generated by vacuum sputtering of a 10 nm Au layer on one side of the MSNMs. Upon exposure to an NIR laser, a localized photothermal effect on the Au half-shells results in the formation of thermal gradients across the JMSNMs; thus, the generated self-thermophoresis can actively drive the nanomotors to move at an ultrafast speed, for instance, up to 950 body lengths/s for 50 nm JMSNMs under an NIR laser power of 70.3 W/cm(2). The reversible "on/off" motion of the JMSNMs and their directed movement along the light gradient can be conveniently modulated by a remote NIR laser. Moreover, dynamic light scattering measurements are performed to investigate the coexisting translational and rotational motion of the JMSNMs in the presence of both self-thermophoretic forces and strong Brownian forces. These NIR-powered nanomotors demonstrate a novel strategy for overcoming the necessity of chemical fuels and exhibit a significant improvement in the maneuverability of nanomotors while providing potential cargo transportation in a biofriendly manner. PMID:27152728

  5. Protective effect of mesoporous silica particles on encapsulated folates.

    PubMed

    Ruiz-Rico, María; Daubenschüz, Hanna; Pérez-Esteve, Édgar; Marcos, María D; Amorós, Pedro; Martínez-Máñez, Ramón; Barat, José M

    2016-08-01

    Mesoporous silica particles (MSPs) are considered suitable supports to design gated materials for the encapsulation of bioactive molecules. Folates are essential micronutrients which are sensitive to external agents that provoke nutritional deficiencies. Folates encapsulation in MSPs to prevent degradation and to allow their controlled delivery is a promising strategy. Nevertheless, no information exists about the protective effect of MSPs encapsulation to prevent their degradation. In this work, 5-formyltetrahydrofolate (FO) and folic acid (FA) were entrapped in MSPs functionalized with polyamines, which acted as pH-dependent molecular gates. The stability of free and entrapped vitamins after acidic pH, high temperature and light exposure was studied. The results showed the degradation of FO after high temperature and acidic pH, whereas entrapped FO displayed enhanced stability. Free FA was degraded by light, but MSPs stabilized the vitamin. The obtained results point toward the potential use of MSPs as candidates to enhance stability and to improve the bioavailability of functional biomolecules. PMID:27235728

  6. Facile synthesis of size controllable dendritic mesoporous silica nanoparticles.

    PubMed

    Yu, Ye-Jun; Xing, Jun-Ling; Pang, Jun-Ling; Jiang, Shu-Hua; Lam, Koon-Fung; Yang, Tai-Qun; Xue, Qing-Song; Zhang, Kun; Wu, Peng

    2014-12-24

    The synthesis of highly uniform mesoporous silica nanospheres (MSNs) with dendritic pore channels, particularly ones with particle sizes below 200 nm, is extremely difficult and remains a grand challenge. By a combined synthetic strategy using imidazolium ionic liquids (ILs) with different alkyl lengths as cosurfactants and Pluronic F127 nonionic surfactants as inhibitors of particle growth, the preparation of dendritic MSNs with controlled diameter between 40 and 300 nm was successfully realized. An investigation of dendritic MSNs using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and nitrogen physisorption revealed that the synthesis of dendritic MSNs at larger size (100-300 nm) strongly depends on the alkyl lengths of cationic imidazolium ILs; while the average size of dendritic MSNs can be controlled within the range of 40-100 nm by varying the amount of Pluronic F127. The Au@MSNs can be used as a catalyst for the reduction of 4-nitrophenol by NaBH4 into 4-aminophenol and exhibit excellent catalytic performance. The present discovery of the extended synthesis conditions offers reproducible, facile, and large-scale synthesis of the monodisperse spherical MSNs with precise size control and, thus, has vast prospects for future applications of ultrafine mesostructured nanoparticle materials in catalysis and biomedicine. PMID:25454255

  7. Magnetic Fluorescent Delivery Vehicle using Uniform Mesoporous Silica Spheres Embedded with Monodisperse Magnetic and Semiconductor Nanocrystals

    SciTech Connect

    Kim, Jaeyun; Lee, Ji Eun; Lee, Jinwoo; Yu, Jung Ho; Kim, Byoung Chan; An, Kwangjin; Hwang, Yosun; Shin, Chae-Ho; Park, Je-Geun; Kim, Jungbae; Hyeon, Taeghwan

    2006-01-25

    Uniform sized colloidal nanocrystals have attracted much attention, because of their unique magnetic and optical properties, as compared with those of their bulk counterparts. Especially magnetic nanocrystals and quantum dots have been intensively pursued for biomedical applications such as contrast enhancement agents in magnetic resonance imaging, magnetic carriers for drug delivery system, biological labeling and diagnostics. Due to their large pore sizes and high surface areas, mesoporous materials and its composites with nanocrystals have attracted considerable attention. In order to use the nanocrystals as functional delivery carriers and catalytic supports, nanocrystals coated with porous silica shells are desirable. Herein, we report a synthetic procedure for the fabrication of monodisperse nanocrystals embedded in uniform pore-sized mesoporous silica spheres. As a representative example, we synthesized monodisperse magnetite (Fe3O4) nanocrystals embedded in mesoporous silica spheres and both magnetite nanocrystals and CdSe/ZnS quantum dots embedded in mesoporous silica spheres. Furthermore, these mesoporous silica spheres were applied to the uptake and controlled release of drugs.

  8. Synthesis of highly-ordered mesoporous carbon/silica nanocomposites and derivative hierarchically mesoporous carbon from a phenyl-bridged organosiloxane

    NASA Astrophysics Data System (ADS)

    Wu, Zhiwang; Pang, Jiebin; Lu, Yunfeng

    2009-11-01

    Mesoporous carbon/silica nanocomposites and derivative hierarchically mesoporous carbon have been prepared using 1,4-bis(triethoxysilyl)benzene (BTEB) as a precursor for a carbon/silica network and Pluronic P123 (HO(CH2CH2O)20(CH2CH(CH3)O)70(CH2CH2O)20H) as a template for highly-ordered hexagonal pores. Co-assembly of BTEB and P123 and subsequent carbonization results in a mesoporous carbon/silica nanocomposite with hexagonally oriented pores. Removal of the silica component in the carbon/silica network creates a second porosity in the network and results in hierarchically mesoporous carbon. The mesostructure of these materials was characterized by transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM), powder X-ray diffraction (PXRD), and N2 sorption.

  9. Magnetic properties of mesoporous cobalt-silica-alumina ternary mixed oxides

    SciTech Connect

    Pal, Nabanita; Seikh, Md. Motin; Bhaumik, Asim

    2013-02-15

    Mesoporous cobalt-silica-alumina mixed oxides with variable cobalt content have been synthesized through slow evaporation method by using Pluronic F127 non-ionic surfactant as template. N{sub 2} sorption analysis of the template-free mixed oxide samples revealed that these mesoporous materials have high BET surface areas together with large mesopores. Powder XRD, TEM, EDS, FT IR and EPR spectroscopic analysis have been employed to understand the nature of the mesophases, bonding and composition of the materials. Low temperature magnetic measurements of these mixed oxide materials show the presence of ferromagnetic correlation at elevated temperature though at low temperature paramagnetic to ferrimagnetic transition is observed. Highlights: Black-Right-Pointing-Pointer Mesoporous cobalt-silica-alumina ternary mixed oxides. Black-Right-Pointing-Pointer High surface area and mesoporosity in magnetic materials. Black-Right-Pointing-Pointer Ferromagnetic correlation at elevated temperature. Black-Right-Pointing-Pointer Low temperature paramagnetic to ferrimagnetic transition.

  10. Mesoporous silica film from a solution containing a surfactant and methods of making same

    DOEpatents

    Liu, Jun [West Richland, WA; Domansky, Karel [Cambridge, MA; Li, Xiaohong [Richland, WA; Fryxell, Glen E [Kennewick, WA; Baskaran, Suresh [Kennewick, WA; Kohler, Nathan J [Richland, WA; Thevuthasan, Suntharampillai [Kennewick, WA; Coyle, Christopher A [Richland, WA; Birnbaum, Jerome C [Richland, WA

    2001-12-11

    The present invention is a mesoporous silica film having a low dielectric constant and method of making having the steps of combining a surfactant in a silica precursor solution, spin-coating a film from this solution mixture, forming a partially hydroxylated mesoporous film, and dehydroxylating the hydroxylated film to obtain the mesoporous film. It is advantageous that the small polyoxyethylene ether surfactants used in spin-coated films as described in the present invention will result in fine pores smaller on average than about 20 nm. The resulting mesoporous film has a dielectric constant less than 3, which is stable in moist air with a specific humidity. The present invention provides a method for superior control of film thickness and thickness uniformity over a coated wafer, and films with low dielectric constant.

  11. Preparation and characterization of glycidyl methacrylate organo bridges grafted mesoporous silica SBA-15 as ibuprofen and mesalamine carrier for controlled release.

    PubMed

    Rehman, Fozia; Rahim, Abdur; Airoldi, Claudio; Volpe, Pedro L O

    2016-02-01

    Mesoporous silica SBA-15 was synthesized and functionalized with bridged polysilsesquioxane monomers obtained by the reaction of 3-aminopropyltriethoxy silane with glycidyl methacrylate in 2:1 ratio. The synthesized mesoporous silica materials were characterized by elemental analysis, infrared spectroscopy, nuclear magnetic resonance spectroscopy, nitrogen adsorption, X-ray diffraction, thermogravimetry and scanning electron microscopy. The nuclear magnetic resonance in the solid state is in agreement with the sequence of carbon distributed in the attached organic chains, as expected for organically functionalized mesoporous silica. After functionalization with organic bridges the BET surface area was reduced from 1311.80 to 494.2m(2)g(-1) and pore volume was reduced from 1.98 to 0.89cm(3)g(-1), when compared to original precursor silica. Modification of the silica surface with organic bridges resulted in high loading capacity and controlled release of ibuprofen and mesalamine in biological fluids. The Korsmeyer-Peppas model better fits the release data indicating Fickian diffusion and zero order kinetics for synthesized mesoporous silica. The drug release rate from the modified silica was slow in simulated gastric fluid, (pH1.2) where less than 10% of mesalamine and ibuprofen were released in initial 8h, while comparatively high release rates were observed in simulated intestinal (pH6.8) and simulated body fluids (pH7.2). The preferential release of mesalamine at intestinal pH suggests that the modified silica could be a simple, efficient, inexpensive and convenient carrier for colon targeted drugs, such a mesalamine and also as a controlled drug release system. PMID:26652455

  12. Cationic poly(ɛ-caprolactone) surface functionalized mesoporous silica nanoparticles and their application in drug delivery

    NASA Astrophysics Data System (ADS)

    Zhang, Yan; Wang, Zhaojun; Zhou, Weimin; Min, Guoquan; Lang, Meidong

    2013-07-01

    Cationic poly(ɛ-caprolactone) modified hollow mesoporous silica (HMSNs) was achieved by a post graft method via covalent linkage between the silanols on the surface of silica and the trimethoxysilane groups at the end of the poly(γ-(carbamic acid benzyl ester)-ɛ-caprolactone). The trimethoxysilane groups were introduced to poly(γ-(carbamic acid benzyl ester)-ɛ-caprolactone) by ring opening polymerization of γ-(carbamic acid benzyl ester)-ɛ-caprolactone (γCABɛCL) with 3-aminopropyl trimethoxysilane as initiator. Subsequently, the polymer was grafted to the HMSNs and the protected groups of Cbz were removed, thus the amino groups were obtained accordingly. The structure of the polymer was confirmed by 1H NMR. In addition, the TEM and SEM demonstrated that the HMSNs were spherical and the polymer was well coated on the spheres. FTIR, TGA and N2 adsorption results proved that the modified processes were effective and the structure of the HMSNs was well reserved. The cationic surface was further confirmed by zeta potential. Moreover, the potential application of the HMSNs in drug delivery was studied with ammonium glycyrrhizinate (AMG) as model drug. Results showed that the cationic HMSNs could be an efficient AMG carrier.

  13. Bone tissue engineering using silica-based mesoporous nanobiomaterials:Recent progress.

    PubMed

    Shadjou, Nasrin; Hasanzadeh, Mohammad

    2015-10-01

    Bone disorders are of significant concern due to increase in the median age of our population. It is in this context that tissue engineering has been emerging as a valid approach to the current therapies for bone regeneration/substitution. Tissue-engineered bone constructs have the potential to alleviate the demand arising from the shortage of suitable autograft and allograft materials for augmenting bone healing. Silica based mesostructured nanomaterials possessing pore sizes in the range 2-50 nm and surface reactive functionalities have elicited immense interest due to their exciting prospects in bone tissue engineering. In this review we describe application of silica-based mesoporous nanomaterials for bone tissue engineering. We summarize the preparation methods, the effect of mesopore templates and composition on the mesopore-structure characteristics, and different forms of these materials, including particles, fibers, spheres, scaffolds and composites. Also, the effect of structural and textural properties of mesoporous materials on development of new biomaterials for production of bone implants and bone cements was discussed. Also, application of different mesoporous materials on construction of manufacture 3-dimensional scaffolds for bone tissue engineering was discussed. It begins by giving the reader a brief background on tissue engineering, followed by a comprehensive description of all the relevant components of silica-based mesoporous biomaterials on bone tissue engineering, going from materials to scaffolds and from cells to tissue engineering strategies that will lead to "engineered" bone. PMID:26117771

  14. The intracellular controlled release from bioresponsive mesoporous silica with folate as both targeting and capping agent

    NASA Astrophysics Data System (ADS)

    Guo, Rui; Li, Le-Le; Zhao, Wen-Hua; Chen, Yu-Xi; Wang, Xiao-Zhu; Fang, Chen-Jie; Feng, Wei; Zhang, Tian-Lan; Ma, Xiang; Lu, Meng; Peng, Shi-Qi; Yan, Chun-Hua

    2012-05-01

    A smart mesoporous silica nanocarrier with intracellular controlled release is fabricated, with folic acid as dual-functional targeting and capping agent. The folate not only improves the efficiency of the nanocarrier internalized by the cancer cells, but also blocks the pores of the mesoporous silica to eliminate premature leakage of the drug. With disulfide bonds as linkers to attach the dual-functional folate within the surface of mesoporous silica, the controlled release can be triggered in the presence of reductant dithiothreitol (DTT) or glutathione (GSH). The cellular internalization via folate-receptor-mediated endocytosis and the intracellular controlled release of highly toxic anticancer drug DOX were demonstrated with an in vitro HeLa cell culture, indicating an efficient cancer-targeted drug delivery.A smart mesoporous silica nanocarrier with intracellular controlled release is fabricated, with folic acid as dual-functional targeting and capping agent. The folate not only improves the efficiency of the nanocarrier internalized by the cancer cells, but also blocks the pores of the mesoporous silica to eliminate premature leakage of the drug. With disulfide bonds as linkers to attach the dual-functional folate within the surface of mesoporous silica, the controlled release can be triggered in the presence of reductant dithiothreitol (DTT) or glutathione (GSH). The cellular internalization via folate-receptor-mediated endocytosis and the intracellular controlled release of highly toxic anticancer drug DOX were demonstrated with an in vitro HeLa cell culture, indicating an efficient cancer-targeted drug delivery. Electronic supplementary information (ESI) available: the details of XRD patterns and HRTEM images of the materials, release profile of F⊂M-F in an acidic solution, intracellular uptake measurement with flow cytometry, intracellular release measurement with confocal fluorescence microscopy, selected distance of folate derivatives. See DOI: 10

  15. Cellulose conjugated FITC-labelled mesoporous silica nanoparticles: intracellular accumulation and stimuli responsive doxorubicin release

    NASA Astrophysics Data System (ADS)

    Hakeem, Abdul; Zahid, Fouzia; Duan, Ruixue; Asif, Muhammad; Zhang, Tianchi; Zhang, Zhenyu; Cheng, Yong; Lou, Xiaoding; Xia, Fan

    2016-02-01

    Herein, we design novel cellulose conjugated mesoporous silica nanoparticle (CLS-MSP) based nanotherapeutics for stimuli responsive intracellular doxorubicin (DOX) delivery. DOX molecules are entrapped in pores of the fabricated mesoporous silica nanoparticles (MSPs) while cellulose is used as an encapsulating material through esterification on the outlet of the pores of the MSPs to avoid premature DOX release under physiological conditions. In in vitro studies, stimuli responsive DOX release is successfully achieved from DOX loaded cellulose conjugated mesoporous silica nanoparticles (DOX/CLS-MSPs) by pH and cellulase triggers. Intracellular accumulation of DOX/CLS-MSPs in human liver cancer cells (HepG2 cells) is investigated through confocal microscope magnification. Cell viability of HepG2 cells is determined as the percentage of the cells incubated with DOX/CLS-MSPs compared with that of non-incubated cells through an MTT assay.Herein, we design novel cellulose conjugated mesoporous silica nanoparticle (CLS-MSP) based nanotherapeutics for stimuli responsive intracellular doxorubicin (DOX) delivery. DOX molecules are entrapped in pores of the fabricated mesoporous silica nanoparticles (MSPs) while cellulose is used as an encapsulating material through esterification on the outlet of the pores of the MSPs to avoid premature DOX release under physiological conditions. In in vitro studies, stimuli responsive DOX release is successfully achieved from DOX loaded cellulose conjugated mesoporous silica nanoparticles (DOX/CLS-MSPs) by pH and cellulase triggers. Intracellular accumulation of DOX/CLS-MSPs in human liver cancer cells (HepG2 cells) is investigated through confocal microscope magnification. Cell viability of HepG2 cells is determined as the percentage of the cells incubated with DOX/CLS-MSPs compared with that of non-incubated cells through an MTT assay. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr08753h

  16. Carbon functionalized mesoporous silica-based gas sensors for indoor volatile organic compounds.

    PubMed

    Liu, Yupu; Chen, Junchen; Li, Wei; Shen, Dengke; Zhao, Yujuan; Pal, Manas; Yu, Haijun; Tu, Bo; Zhao, Dongyuan

    2016-09-01

    Indoor organic gaseous pollution is a global health problem, which seriously threats the health and life of human all over the world. Hence, it is important to fabricate new sensing materials with high sensitivity and efficiency for indoor volatile organic compounds. In this study, a series of ordered mesoporous silica-based nanocomposites with uniform carbon coatings on the internal surface of silica mesopore channels were synthesized through a simple template-carbonization strategy. The obtained mesoporous silica-carbon nanocomposites not only possess ordered mesostructures, high surface areas (up to ∼759m(2)g(-1)), large and tunable pore sizes (2.6-10.2nm), but also have the improved hydrophobicity and anti-interference capability to environmental humidity. The sensing performances of the mesoporous silica-carbon nanocomposites to volatile organic compounds, such as ethylbenzene, methylbenzene, benzene, methanol, acetone, formaldehyde, dichloromethane and tetrahydrofuran, were systematically investigated. The relationships between the sensing performances and their properties, including mesostructures, surface areas, pore sizes, carbon contents and surface hydrophilic/hydrophobic interactions, have been achieved. The mesoporous silica-carbon nanocomposites with hexagonal mesostructure exhibit outstanding performance at room temperature to benzene and acetone with high responses, short response (2-3s) and recovery (16-19s) time, strong anti-interference to environmental humidity, and long-term stability (less than ∼5% loss of the frequency shifts after 42days). Therefore, the obtained mesoporous silica-carbon nanocomposites have a hopeful prospect in the field of environmental air quality monitoring. PMID:27240244

  17. Preparation, characterization and oxygen sensing properties of luminescent carbon dots assembled mesoporous silica microspheres.

    PubMed

    Wang, Li; Zhang, Haoran; Zhou, Xiaohua; Liu, Yingliang; Lei, Bingfu

    2016-09-15

    In this paper, our effort was focused on preparation and oxygen sensing of luminescence carbon dots (CDs) assembled hollow mesoporous silica microspheres (HMSMs) and mesoporous silica microspheres (MSMs). MSMs doped with CDs showed shorter response time and recovery time comparing with HMSMs doped with CDs. This feature can be attributed to ordered channel structure of mesoporous carrier which can promote the gas diffusion effectively. While HMSMs doped with CDs shows a higher oxygen quenching response and the degree of quenching reach 80.35%. The response time was determined to be about 7s and the emission intensities of the samples were effectively reduced as the concentration of oxygen increased. These results indicate that the system we have developed can be used for oxygen detection in wide concentration range and is especially accurate for very low oxygen concentrations. The obtained CDs grafted hollow mesoporous silica microspheres (HMSMs) and mesoporous silica microspheres (MSMs) samples appears to be a promising sensing material for environmental detection application and would also find applications in catalyst, electrode, or related fields. PMID:27309945

  18. Development and Testing of Diglycolamide Functionalized Mesoporous Silica for Sorption of Trivalent Actinides and Lanthanides.

    PubMed

    Shusterman, Jennifer A; Mason, Harris E; Bowers, Jon; Bruchet, Anthony; Uribe, Eva C; Kersting, Annie B; Nitsche, Heino

    2015-09-23

    Sequestration of trivalent actinides and lanthanides present in used nuclear fuel and legacy wastes is necessary for appropriate long-term stewardship of these metals, particularly to prevent their release into the environment. Organically modified mesoporous silica is an efficient material for recovery and potential subsequent separation of actinides and lanthanides because of its high surface area, tunable ligand selection, and chemically robust substrate. We have synthesized the first novel hybrid material composed of SBA-15 type mesoporous silica functionalized with diglycolamide ligands (DGA-SBA). Because of the high surface area substrate, the DGA-SBA was found to have the highest Eu capacity reported so far in the literature of all DGA solid-phase extractants. The sorption behavior of europium and americium on DGA-SBA in nitric and hydrochloric acid media was tested in batch contact experiments. DGA-SBA was found to have high sorption of Am and Eu in pH 1, 1 M, and 3 M nitric and hydrochloric acid concentrations, which makes it promising for sequestration of these metals from used nuclear fuel or legacy waste. The kinetics of Eu sorption were found to be two times slower than that for Am in 1 M HNO3. Additionally, the short-term susceptibility of DGA-SBA to degradation in the presence of acid was probed using (29)Si and (13)C solid-state NMR spectroscopy. The material was found to be relatively stable under these conditions, with the ligand remaining intact after 24 h of contact with 1 M HNO3, an important consideration in use of the DGA-SBA as an extractant from acidic media. PMID:26334933

  19. Targeted anticancer prodrug with mesoporous silica nanoparticles as vehicles

    NASA Astrophysics Data System (ADS)

    Fan, Jianquan; Fang, Gang; Wang, Xiaodan; Zeng, Fang; Xiang, Yufei; Wu, Shuizhu

    2011-11-01

    A targeted anticancer prodrug system was fabricated with 180 nm mesoporous silica nanoparticles (MSNs) as carriers. The anticancer drug doxorubicin (DOX) was conjugated to the particles through an acid-sensitive carboxylic hydrazone linker which is cleavable under acidic conditions. Moreover, folic acid (FA) was covalently conjugated to the particle surface as the targeting ligand for folate receptors (FRs) overexpressed in some cancer cells. The in vitro release profiles of DOX from the MSN-based prodrug systems showed a strong dependence on the environmental pH values. The fluorescent dye FITC was incorporated in the MSNs so as to trace the cellular uptake on a fluorescence microscope. Cellular uptakes by HeLa, A549 and L929 cell lines were tested for FA-conjugated MSNs and plain MSNs respectively, and a much more efficient uptake by FR-positive cancer cells (HeLa) can be achieved by conjugation of folic acid onto the particles because of the folate-receptor-mediated endocytosis. The cytotoxicities for the FA-conjugated MSN prodrug, the plain MSN prodrug and free DOX against three cell lines were determined, and the result indicates that the FA-conjugated MSN prodrug exhibits higher cytotoxicity to FR-positive cells, and reduced cytotoxicity to FR-negative cells. Thus, with 180 nm MSNs as the carriers for the prodrug system, good drug loading, selective targeting and sustained release of drug molecules within targeted cancer cells can be realized. This study may provide useful insights for designing and improving the applicability of MSNs in targeted anticancer prodrug systems.

  20. Antibacterial Dental Composites with Chlorhexidine and Mesoporous Silica

    PubMed Central

    Zhang, J.F.; Wu, R.; Fan, Y.; Liao, S.; Wang, Y.; Wen, Z.T.; Xu, X.

    2014-01-01

    One of the leading causes for the failure of dental composite restorations is secondary caries. Effectively inhibiting cariogenic biofilms and reducing secondary caries could extend the service life of composite restorations. Dental composites releasing antibacterial agents such as chlorhexidine (CHX) have shown biofilm-inhibitory efficacy, but they usually have poor physical and mechanical properties. Herein, we present a study of a new method to encapsulate and release CHX from dental composite using mesoporous silica nanoparticles (MSNs). SBA-15 MSNs were synthesized according to a reported procedure. CHX (62.9 wt%) was encapsulated into dried MSN from 0.3 M CHX ethanol solution. The dental composites containing 0% (control), 3%, 5%, and 6.3% CHX or the same amounts of CHX entrapped in MSN (denoted as CHX@MSN) were fabricated with methacrylate monomers and silanized glass fillers (CHX or CHX@MSN + glass filler particle = 70 wt%). The monomer mixture consisted of bisphenol A glycidyl methacrylate (BisGMA), hexanediol dimethacrylate (HDDMA), ethoxylated bisphenol A dimethacrylate (EBPADMA), and urethane dimethacrylates (UEDMA) at a weight ratio of 40:30:20:10. The composites were tested for CHX release and recharge, flexural strength and modulus (at 24 hr and 1 mo), surface roughness, in vitro wear, and antibacterial activity against Streptococcus mutans and Lactobacillus casei (in both planktonic growth and biofilm formation). The results showed that the composites with CHX@MSN largely retained mechanical properties and smooth surfaces and showed controlled release of CHX over a long time. In contrast, the composites with directly mixed CHX showed reduced mechanical properties, rough surfaces, and burst release of CHX in a short time. The composites with CHX either directly mixed or in MSN showed strong inhibition to S. mutans and L. casei. This research has demonstrated the successful application of MSNs as a novel nanotechnology in dental materials to inhibit

  1. Antibacterial dental composites with chlorhexidine and mesoporous silica.

    PubMed

    Zhang, J F; Wu, R; Fan, Y; Liao, S; Wang, Y; Wen, Z T; Xu, X

    2014-12-01

    One of the leading causes for the failure of dental composite restorations is secondary caries. Effectively inhibiting cariogenic biofilms and reducing secondary caries could extend the service life of composite restorations. Dental composites releasing antibacterial agents such as chlorhexidine (CHX) have shown biofilm-inhibitory efficacy, but they usually have poor physical and mechanical properties. Herein, we present a study of a new method to encapsulate and release CHX from dental composite using mesoporous silica nanoparticles (MSNs). SBA-15 MSNs were synthesized according to a reported procedure. CHX (62.9 wt%) was encapsulated into dried MSN from 0.3 M CHX ethanol solution. The dental composites containing 0% (control), 3%, 5%, and 6.3% CHX or the same amounts of CHX entrapped in MSN (denoted as CHX@MSN) were fabricated with methacrylate monomers and silanized glass fillers (CHX or CHX@MSN + glass filler particle = 70 wt%). The monomer mixture consisted of bisphenol A glycidyl methacrylate (BisGMA), hexanediol dimethacrylate (HDDMA), ethoxylated bisphenol A dimethacrylate (EBPADMA), and urethane dimethacrylates (UEDMA) at a weight ratio of 40:30:20:10. The composites were tested for CHX release and recharge, flexural strength and modulus (at 24 hr and 1 mo), surface roughness, in vitro wear, and antibacterial activity against Streptococcus mutans and Lactobacillus casei (in both planktonic growth and biofilm formation). The results showed that the composites with CHX@MSN largely retained mechanical properties and smooth surfaces and showed controlled release of CHX over a long time. In contrast, the composites with directly mixed CHX showed reduced mechanical properties, rough surfaces, and burst release of CHX in a short time. The composites with CHX either directly mixed or in MSN showed strong inhibition to S. mutans and L. casei. This research has demonstrated the successful application of MSNs as a novel nanotechnology in dental materials to inhibit

  2. Mesoporous Silica-Supported Amidozirconium-Catalyzed Carbonyl Hydroboration

    SciTech Connect

    Eedugurala, Naresh; Wang, Zhuoran; Chaudhary, Umesh; Nelson, Nicholas; Kandel, Kapil; Kobayashi, Takeshi; Slowing, Igor I.; Pruski, Marek; Sadow, Aaron D.

    2015-11-04

    The hydroboration of aldehydes and ketones using a silica-supported zirconium catalyst is reported. Reaction of Zr(NMe2)4 and mesoporous silica nanoparticles (MSN) provides the catalytic material Zr(NMe2)n@MSN. Exhaustive characterization of Zr(NMe2)n@MSN with solid-state (SS)NMR and infrared spectroscopy, as well as through reactivity studies, suggests its surface structure is primarily ≡SiOZr(NMe2)3. The presence of these nitrogen-containing zirconium sites is supported by 15N NMR spectroscopy, including natural abundance 15N NMR measurements using dynamic nuclear polarization (DNP) SSNMR. The Zr(NMe2)n@MSN material reacts with pinacolborane (HBpin) to provide Me2NBpin and the material ZrH/Bpin@MSN that is composed of interacting surface-bonded zirconium hydride and surface-bonded borane ≡SiOBpin moieties in an approximately 1:1 ratio, as well as zirconium sites coordinated by dimethylamine. The ZrH/Bpin@MSN is characterized by 1H/2H and 11B SSNMR and infrared spectroscopy and through its reactivity with D2. The zirconium hydride material or the zirconium amide precursor Zr(NMe2)n@MSN catalyzes the selective hydroboration of aldehydes and ketones with HBpin in the presence of functional groups that are often reduced under hydroboration conditions or are sensitive to metal hydrides, including olefins, alkynes, nitro groups, halides, and ethers. Remarkably, this catalytic material may be recycled without loss of activity at least eight times, and air-exposed materials are catalytically active. These supported zirconium centers are robust catalytic sites for carbonyl reduction and that surface-supported, catalytically reactive zirconium hydride may be generated from zirconium-amide or zirconium alkoxide sites.

  3. Synthesis and optical behaviour of mesoporous silica functionalized by organometallic molecules

    NASA Astrophysics Data System (ADS)

    Laskowski, L.; Kassiba, A.; Makowska-Janusik, M.; Errien, N.; Mehdi, A.; Swiatek, J.

    2011-04-01

    Mesoporous silica SBA-15 functionalized by (1,4,8,11-tetraazacyclotetradecane) cyclam groups chelating nickel ions (Ni-cyclam) were synthesized by two different approaches. Characterizations by transmission electron microscopy TEM and UV-VIS absorption spectroscopy were performed to monitor the structure and optical properties of the material with regard to the used synthesis methods. The assignment of the experimental UV-VIS absorption spectra is carried out by using the support of suitable numerical simulations based on quantum chemistry DFT codes developed on the modelled (Ni-cyclam) system as free molecule and also constrained in the pores of mesoporous silica matrices.

  4. Ionic liquid-templated preparation of mesoporous silica embedded with nanocrystalline sulfated zirconia

    NASA Astrophysics Data System (ADS)

    Ward, Antony J.; Pujari, Ajit A.; Costanzo, Lorenzo; Masters, Anthony F.; Maschmeyer, Thomas

    2011-12-01

    A series of mesoporous silicas impregnated with nanocrystalline sulphated zirconia was prepared by a sol-gel process using an ionic liquid-templated route. The physicochemical properties of the mesoporous sulphated zirconia materials were studied using characterisation techniques such as inductively coupled optical emission spectroscopy, X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray microanalysis, elemental analysis and X-ray photoelectron spectroscopy. Analysis of the new silicas indicates isomorphous substitution of silicon with zirconium and reveals the presence of extremely small (< 10 nm) polydispersed zirconia nanoparticles in the materials with zirconium loadings from 27.77 to 41.4 wt.%.

  5. Enzyme-controlled sensing-actuating nanomachine based on Janus Au-mesoporous silica nanoparticles.

    PubMed

    Villalonga, Reynaldo; Díez, Paula; Sánchez, Alfredo; Aznar, Elena; Martínez-Máñez, Ramón; Pingarrón, José M

    2013-06-10

    Novel Janus nanoparticles with Au and mesoporous silica faces on opposite sides were prepared using a Pickering emulsion template with paraffin wax as the oil phase. These anisotropic colloids were employed as integrated sensing-actuating nanomachines for enzyme-controlled stimuli-responsive cargo delivery. As a proof of concept, we demonstrated the successful use of the Janus colloids for controlled delivery of tris(2,2'-bipyridyl) ruthenium(II) chloride from the mesoporous silica face, which was grafted with pH-sensitive gatelike scaffoldings. The release was mediated by the on-demand catalytic decomposition of urea by urease, which was covalently immobilized on the Au face. PMID:23649789

  6. Polydopamine-based surface modification of mesoporous silica nanoparticles as pH-sensitive drug delivery vehicles for cancer therapy.

    PubMed

    Chang, Danfeng; Gao, Yongfeng; Wang, Lijun; Liu, Gan; Chen, Yuhan; Wang, Teng; Tao, Wei; Mei, Lin; Huang, Laiqiang; Zeng, Xiaowei

    2016-02-01

    A novel pH-sensitive drug delivery system of mesoporous silica nanoparticles (MSNs) which were modified by polydopamine (PDA) for controlled release of cationic amphiphilic drug desipramine (DES) was prepared. MSNs-DES-PDA were characterized in terms of size, size distribution, surface morphology, BET surface area, mesoporous size and pore volume, drug loading content and in vitro drug release profile. MSNs-DES-PDA had high drug loading content and pH sensitivity. The DES release profiles of MSNs-DES and MSNs-DES-PDA were totally different, and the drug release of MSNs-DES-PDA accelerated with increasing acidity. MSNs-DES-PDA can be internalized into cells. In vitro experiments demonstrated that MSNs-DES-PDA had higher cytotoxicity and inhibitory effects on acid sphingomyelinase than those of free DES. This drug delivery system was beneficial for controlled release and cancer therapy. PMID:26550786

  7. Immobilization of Zidovudine Derivatives on the SBA-15 Mesoporous Silica and Evaluation of Their Cytotoxic Activity

    PubMed Central

    Lewandowski, Dawid

    2015-01-01

    Novel zidovudine derivatives, able to be covalently conjugated to silica surface, have been obtained and grafted to SBA-15 mesoporous silica. Cytotoxic activity of the hybrid organic-inorganic (zidovudine derivatives-silica) systems against HeLa and KB cell lines has been analyzed. Addition of folic acid had a positive influence on the cytotoxicity. Up to 69% of HeLa and 65% of KB tumor cells growth inhibition has been achieved at low silica concentration used (10 μg/mL). PMID:25942021

  8. Immobilization of Zidovudine Derivatives on the SBA-15 Mesoporous Silica and Evaluation of Their Cytotoxic Activity.

    PubMed

    Lewandowski, Dawid; Lewandowska, Marta; Ruszkowski, Piotr; Pińska, Anita; Schroeder, Grzegorz

    2015-01-01

    Novel zidovudine derivatives, able to be covalently conjugated to silica surface, have been obtained and grafted to SBA-15 mesoporous silica. Cytotoxic activity of the hybrid organic-inorganic (zidovudine derivatives-silica) systems against HeLa and KB cell lines has been analyzed. Addition of folic acid had a positive influence on the cytotoxicity. Up to 69% of HeLa and 65% of KB tumor cells growth inhibition has been achieved at low silica concentration used (10 μg/mL). PMID:25942021

  9. Ordered mesoporous silica prepared by quiescent interfacial growth method - effects of reaction chemistry

    PubMed Central

    2013-01-01

    Acidic interfacial growth can provide a number of industrially important mesoporous silica morphologies including fibers, spheres, and other rich shapes. Studying the reaction chemistry under quiescent (no mixing) conditions is important for understanding and for the production of the desired shapes. The focus of this work is to understand the effect of a number of previously untested conditions: acid type (HCl, HNO3, and H2SO4), acid content, silica precursor type (TBOS and TEOS), and surfactant type (CTAB, Tween 20, and Tween 80) on the shape and structure of products formed under quiescent two-phase interfacial configuration. Results show that the quiescent growth is typically slow due to the absence of mixing. The whole process of product formation and pore structuring becomes limited by the slow interfacial diffusion of silica source. TBOS-CTAB-HCl was the typical combination to produce fibers with high order in the interfacial region. The use of other acids (HNO3 and H2SO4), a less hydrophobic silica source (TEOS), and/or a neutral surfactant (Tweens) facilitate diffusion and homogenous supply of silica source into the bulk phase and give spheres and gyroids with low mesoporous order. The results suggest two distinct regions for silica growth (interfacial region and bulk region) in which the rate of solvent evaporation and local concentration affect the speed and dimension of growth. A combined mechanism for the interfacial bulk growth of mesoporous silica under quiescent conditions is proposed. PMID:24237719

  10. Synthesis of mesoporous silica materials from municipal solid waste incinerator bottom ash

    SciTech Connect

    Liu, Zhen-Shu Li, Wen-Kai; Huang, Chun-Yi

    2014-05-01

    Highlights: • The optimal alkaline agent for the extraction of silica from bottom ash was Na{sub 2}CO{sub 3}. • The pore sizes for the mesoporous silica synthesized from bottom ash were 2–3.8 nm. • The synthesized materials exhibited a hexagonal pore structure with a smaller order. • The materials have potential for the removal of heavy metals from aqueous solutions. - Abstract: Incinerator bottom ash contains a large amount of silica and can hence be used as a silica source for the synthesis of mesoporous silica materials. In this study, the conditions for alkaline fusion to extract silica from incinerator bottom ash were investigated, and the resulting supernatant solution was used as the silica source for synthesizing mesoporous silica materials. The physical and chemical characteristics of the mesoporous silica materials were analyzed using BET, XRD, FTIR, SEM, and solid-state NMR. The results indicated that the BET surface area and pore size distribution of the synthesized silica materials were 992 m{sup 2}/g and 2–3.8 nm, respectively. The XRD patterns showed that the synthesized materials exhibited a hexagonal pore structure with a smaller order. The NMR spectra of the synthesized materials exhibited three peaks, corresponding to Q{sup 2} [Si(OSi){sub 2}(OH){sub 2}], Q{sup 3} [Si(OSi){sub 3}(OH)], and Q{sup 4} [Si(OSi){sub 4}]. The FTIR spectra confirmed the existence of a surface hydroxyl group and the occurrence of symmetric Si–O stretching. Thus, mesoporous silica was successfully synthesized from incinerator bottom ash. Finally, the effectiveness of the synthesized silica in removing heavy metals (Pb{sup 2+}, Cu{sup 2+}, Cd{sup 2+}, and Cr{sup 2+}) from aqueous solutions was also determined. The results showed that the silica materials synthesized from incinerator bottom ash have potential for use as an adsorbent for the removal of heavy metals from aqueous solutions.

  11. Synthesis of multi-functional large pore mesoporous silica nanoparticles as gene carriers

    NASA Astrophysics Data System (ADS)

    Hartono, Sandy B.; Yu, Meihua; Gu, Wenyi; Yang, Jie; Strounina, Ekaterina; Wang, Xiaolin; Qiao, Shizhang; Yu, Chengzhong

    2014-02-01

    The development of functional nanocarriers that can enhance the cellular delivery of a variety of nucleic acid agents is important in many biomedical applications such as siRNA therapy. We report the synthesis of large pore mesoporous silica nanoparticles (LPMSN) loaded with iron oxide and covalently modified by polyethyleneimine (denoted PEI-Fe-LPMSN) as carriers for gene delivery. The LPMSN have a particle size of ˜200 nm and a large pore size of 11 nm. The large pore size is essential for the formation of large iron oxide nanoparticles to increase the magnetic properties and the adsorption capacity of siRNA molecules. The magnetic property facilitates the cellular uptake of nanocarriers under an external magnetic field. PEI is covalently grafted on the silica surface to enhance the nanocarriers’ affinity against siRNA molecules and to improve gene silencing performance. The PEI-Fe-LPMSN delivered siRNA-PLK1 effectively into osteosarcoma cancer cells, leading to cell viability inhibition of 80%, higher compared to the 50% reduction when the same dose of siRNA was delivered by a commercial product, oligofectamine.

  12. Effect of polyvinylpyrrolidone on mesoporous silica morphology and esterification of lauric acid with 1-butanol catalyzed by immobilized enzyme

    SciTech Connect

    Zhang, Jinyu; Zhou, Guowei Jiang, Bin; Zhao, Minnan; Zhang, Yan

    2014-05-01

    Mesoporous silica materials with a range of morphology evolution, i.e., from curved rod-shaped mesoporous silica to straight rod-shaped mesoporous silica, were successfully prepared using polyvinylpyrrolidone (PVP) and triblock copolymer as dual template. The effects of PVP molecular weight and concentration on mesoporous silica structure parameters were studied. Results showed that surface area and pore volume continuously decreased with increased PVP molecular weight. Mesoporous silica prepared with PVP K30 also possessed larger pore diameter, interplanar spacing (d{sub 100}), and cell parameter (a{sub 0}) than that prepared with PVP K15 and PVP K90. In addition, with increased PVP concentration, d{sub 100} and a{sub 0} continuously decreased. The mechanism of morphology evolution caused by the change in PVP concentration was investigated. The conversion rate of lauric acid with 1-butanol catalyzed by immobilized Porcine pancreatic lipase (PPL) was also evaluated. Results showed that PPL immobilized on amino-functionalized straight rod-shaped mesoporous silica maintained 50% of its esterification conversion rate even after five cycles of use with a maximum conversion rate was about 90.15%. - Graphical abstract: Curved rod-shaped mesoporous silica can be obtained at low and the highest PVP concentration, while straight rod-shaped mesoporous silica can be obtained at higher PVP concentration. - Highlights: • Mesoporous silica with morphology evolution from CRMS to SRMS were prepared. • Effects of PVP molecular weight and concentration on silica morphology were studied. • A possible mechanism for the formation of morphology evolution SiO{sub 2} was proposed. • Esterification of lauric acid with 1-butanol catalyzed by immobilized PPL.

  13. Mesoporous silica nanoparticles with organo-bridged silsesquioxane framework as innovative platforms for bioimaging and therapeutic agent delivery.

    PubMed

    Du, Xin; Li, Xiaoyu; Xiong, Lin; Zhang, Xueji; Kleitz, Freddy; Qiao, Shi Zhang

    2016-06-01

    Mesoporous silica material with organo-bridged silsesquioxane frameworks is a kind of synergistic combination of inorganic silica, mesopores and organics, resulting in some novel or enhanced physicochemical and biocompatible properties compared with conventional mesoporous silica materials with pure Si-O composition. With the rapid development of nanotechnology, monodispersed nanoscale periodic mesoporous organosilica nanoparticles (PMO NPs) and organo-bridged mesoporous silica nanoparticles (MSNs) with various organic groups and structures have recently been synthesized from 100%, or less, bridged organosilica precursors, respectively. Since then, these materials have been employed as carrier platforms to construct bioimaging and/or therapeutic agent delivery nanosystems for nano-biomedical application, and they demonstrate some unique and/or enhanced properties and performances. This review article provides a comprehensive overview of the controlled synthesis of PMO NPs and organo-bridged MSNs, physicochemical and biocompatible properties, and their nano-biomedical application as bioimaging agent and/or therapeutic agent delivery system. PMID:27017579

  14. Mesoporous silica nanoparticles for treating spinal cord injury

    NASA Astrophysics Data System (ADS)

    White-Schenk, Désirée.; Shi, Riyi; Leary, James F.

    2013-02-01

    An estimated 12,000 new cases of spinal cord injury (SCI) occur every year in the United States. A small oxidative molecule responsible for secondary injury, acrolein, is an important target in SCI. Acrolein attacks essential proteins and lipids, creating a feed-forward loop of oxidative stress in both the primary injury area and the surrounding areas. A small molecule used and FDA-approved for hypertension, hydralazine, has been found to "scavenge" acrolein after injury, but its delivery and short half-life, as well as its hypertension effects, hinder its application for SCI. Nanomedical systems broaden the range of therapeutic availability and efficacy over conventional medicine. They allow for targeted delivery of therapeutic molecules to tissues of interest, reducing side effects of untargeted therapies in unwanted areas. Nanoparticles made from silica form porous networks that can carry therapeutic molecules throughout the body. To attenuate the acrolein cascade and improve therapeutic availability, we have used a one-step, modified Stober method to synthesize two types of silica nanoparticles. Both particles are "stealth-coated" with poly(ethylene) glycol (PEG) (to minimize interactions with the immune system and to increase circulation time), which is also a therapeutic agent for SCI by facilitating membrane repair. One nanoparticle type contains an amine-terminal PEG (SiNP-mPEG-Am) and the other possesses a terminal hydrazide group (SiNP-mPEG-Hz). The former allows for exploration of hydralazine delivery, loading, and controlled release. The latter group has the ability to react with acrolein, allowing the nanoparticle to scavenge directly. The nanoparticles have been characterized and are being explored using neuronal PC-12 cells in vitro, demonstrating the potential of novel silica nanoparticles for use in attenuating secondary injury after SCI.

  15. Monodisperse metal nanoparticle catalysts on silica mesoporous supports: synthesis, characterizations, and catalytic reactions

    SciTech Connect

    Somorjai, G.A.

    2009-09-14

    The design of high performance catalyst achieving near 100% product selectivity at maximum activity is one of the most important goals in the modern catalytic science research. To this end, the preparation of model catalysts whose catalytic performances can be predicted in a systematic and rational manner is of significant importance, which thereby allows understanding of the molecular ingredients affecting the catalytic performances. We have designed novel 3-dimensional (3D) high surface area model catalysts by the integration of colloidal metal nanoparticles and mesoporous silica supports. Monodisperse colloidal metal NPs with controllable size and shape were synthesized using dendrimers, polymers, or surfactants as the surface stabilizers. The size of Pt, and Rh nanoparticles can be varied from sub 1 nm to 15 nm, while the shape of Pt can be controlled to cube, cuboctahedron, and octahedron. The 3D model catalysts were generated by the incorporation of metal nanoparticles into the pores of mesoporous silica supports via two methods: capillary inclusion (CI) and nanoparticle encapsulation (NE). The former method relies on the sonication-induced inclusion of metal nanoparticles into the pores of mesoporous silica, whereas the latter is performed by the encapsulation of metal nanoparticles during the hydrothermal synthesis of mesoporous silica. The 3D model catalysts were comprehensively characterized by a variety of physical and chemical methods. These catalysts were found to show structure sensitivity in hydrocarbon conversion reactions. The Pt NPs supported on mesoporous SBA-15 silica (Pt/SBA-15) displayed significant particle size sensitivity in ethane hydrogenolysis over the size range of 1-7 nm. The Pt/SBA-15 catalysts also exhibited particle size dependent product selectivity in cyclohexene hydrogenation, crotonaldehyde hydrogenation, and pyrrole hydrogenation. The Rh loaded SBA-15 silica catalyst showed structure sensitivity in CO oxidation reaction. In

  16. Monodisperse spherical mesoporous silica particles: fast synthesis procedure and fabrication of photonic-crystal films

    NASA Astrophysics Data System (ADS)

    Trofimova, E. Yu; Kurdyukov, D. A.; Yakovlev, S. A.; Kirilenko, D. A.; Kukushkina, Yu A.; Nashchekin, A. V.; Sitnikova, A. A.; Yagovkina, M. A.; Golubev, V. G.

    2013-04-01

    A procedure for the synthesis of monodisperse spherical mesoporous silica particles (MSMSPs) via the controlled coagulation of silica/surfactant clusters into spherical aggregates with mean diameters of 250-1500 nm has been developed. The synthesis is fast (taking less than 1 h) because identical clusters are simultaneously formed in the reaction mixture. The results of microscopic, x-ray diffraction, adsorption and optical measurements allowed us to conclude that the clusters are ˜15 nm in size and have hexagonally packed cylindrical pore channels. The channel diameters in MSMSPs obtained with cethyltrimethylammonium bromide and decyltrimethylammonium bromide as structure-directing agents were 3.1 ± 0.15 and 2.3 ± 0.12 nm, respectively. The specific surface area and the pore volume of MSMSP were, depending on synthesis conditions, 480-1095 m2 g-1 and 0.50-0.65 cm3 g-1. The MSMSP were used to grow opal-like photonic-crystal films possessing a hierarchical macro-mesoporous structure, with pores within and between the particles. A selective filling of mesopore channels with glycerol, based on the difference between the capillary pressures in macro- and mesopores, was demonstrated. It is shown that this approach makes it possible to control the photonic bandgap position in mesoporous opal films by varying the degree of mesopore filling with glycerol.

  17. Controllable synthesis of hollow mesoporous silica spheres and application as support of nano-gold

    SciTech Connect

    Wang, Tao; Ma, Weihua Shangguan, Junnan; Jiang, Wei; Zhong, Qin

    2014-07-01

    Hollow silica spheres with mesoporous structure were synthesized by sol–gel/emulsion method. In the process, the surfactant, cetyltrimethylammonium bromide (CTAB) was used to stabilize the oil droplet and also used as structure direct agent. The diameter of the hollow silica spheres, ranging from 895 nm to 157 nm, can be controlled by changing the ratio of ethanol to water and the concentration of the surfactant as well. The shell thickness of the spheres decreased when the ratio of ethanol to water decreased. The proposed mechanism of the formation of silica spheres could elucidate the experimental results well. Furthermore, the resultant hollow mesoporous silica spheres were then employed as support of nano-gold which was used to catalyze the isomerization reaction of propylene oxide to produce allyl alcohol. - Graphical abstract: It is the schematic mechanism for the formation of hollow mesoporous silica spheres. - Highlights: • The formation mechanism of the hollow spheres is proposed. • The isomerization of propylene oxide can be catalyzed by the nano-gold/SiO{sub 2}. • The hollow silica spheres can be prepared controllably.

  18. Synthesis of ordered mesoporous silica and alumina with controlled macroscopic morphologies

    NASA Astrophysics Data System (ADS)

    Alsyouri, Hatem Mohammad Sadi

    The ability to synthesize nanostructured inorganic materials with controlled microstructural and morphological features will provide materials with unique characteristics in unprecedented ways. This thesis investigates the synthesis of porous silica and alumina materials with controlled microstructures and desirable shapes using novel approaches based on template-assisted synthesis and chemical vapor deposition (CVD) techniques. It primarily focuses on fabricating mesoporous materials with unique microstructures and different morphologies (particles and membranes) and exploring the potential of the particle morphology in a polymer reaction application. The template-assisted growth of mesoporous silica under acidic and quiescent conditions at an oil-water interface can generate mesostructured silica at the interface with fibrous, gyroidal, spherical, and film morphologies. Synthesis conditions can be used to alter the growth environment and control the product morphology. Fiber morphology is obtained at narrow range of experimental conditions due to slow and one-dimensional diffusion of silicon alkoxide through the interface. Variation in these conditions can alter the axial growth of silica and yield non-fibrous shapes. The fibers grow from their base attached to the interface and coalesce to form fibers with larger diameters. Gas transport in the mesoporous silica fibers is governed by combination of Knudsen and surface diffusion mechanisms. Surface diffusion contributes to 40% of the net flow reflecting a highly smooth pore surfaces. Real Knudsen and surface diffusivities are in the order of 10-3 and 10 -5 cm2/s respectively. The one-dimensional mesopores are 45 time longer than the macroscopic fiber length and align helically around the fiber axis, confirming the literature observations, with a pitch value of 1.05 micron. For preparation of mesoporous silica materials as membranes, a novel counter diffusion self assembly (CDSA) approach is demonstrated. This

  19. 40 CFR 721.10119 - Siloxane modified silica nanoparticles (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Siloxane modified silica nanoparticles... Specific Chemical Substances § 721.10119 Siloxane modified silica nanoparticles (generic). (a) Chemical... as siloxane modified silica nanoparticles (PMN P-05-673) is subject to reporting under this...

  20. 40 CFR 721.10119 - Siloxane modified silica nanoparticles (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Siloxane modified silica nanoparticles... Specific Chemical Substances § 721.10119 Siloxane modified silica nanoparticles (generic). (a) Chemical... as siloxane modified silica nanoparticles (PMN P-05-673) is subject to reporting under this...

  1. 40 CFR 721.10119 - Siloxane modified silica nanoparticles (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Siloxane modified silica nanoparticles... Specific Chemical Substances § 721.10119 Siloxane modified silica nanoparticles (generic). (a) Chemical... as siloxane modified silica nanoparticles (PMN P-05-673) is subject to reporting under this...

  2. 40 CFR 721.10119 - Siloxane modified silica nanoparticles (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Siloxane modified silica nanoparticles... Specific Chemical Substances § 721.10119 Siloxane modified silica nanoparticles (generic). (a) Chemical... as siloxane modified silica nanoparticles (PMN P-05-673) is subject to reporting under this...

  3. 40 CFR 721.10119 - Siloxane modified silica nanoparticles (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Siloxane modified silica nanoparticles... Specific Chemical Substances § 721.10119 Siloxane modified silica nanoparticles (generic). (a) Chemical... as siloxane modified silica nanoparticles (PMN P-05-673) is subject to reporting under this...

  4. Biological Applications and Transmission Electron Microscopy Investigations of Mesoporous Silica Nanoparticles

    SciTech Connect

    Brian G. Trewyn

    2006-05-01

    The research presented and discussed within involves the development of novel biological applications of mesoporous silica nanoparticles (MSN) and an investigation of mesoporous material by transmission electron microscopy (TEM). Mesoporous silica nanoparticles organically functionalized shown to undergo endocytosis in cancer cells and drug release from the pores was controlled intracellularly and intercellularly. Transmission electron microscopy investigations demonstrated the variety of morphologies produced in this field of mesoporous silica nanomaterial synthesis. A series of room-temperature ionic liquid (RTIL) containing mesoporous silica nanoparticle (MSN) materials with various particle morphologies, including spheres, ellipsoids, rods, and tubes, were synthesized. By changing the RTIL template, the pore morphology was tuned from the MCM-41 type of hexagonal mesopores to rotational moire type of helical channels, and to wormhole-like porous structures. These materials were used as controlled release delivery nanodevices to deliver antibacterial ionic liquids against Escherichia coli K12. The involvement of a specific organosiloxane function group, covalently attached to the exterior of fluorescein doped mesoporous silica nanoparticles (FITC-MSN), on the degree and kinetics of endocytosis in cancer and plant cells was investigated. The kinetics of endocystosis of TEG coated FITC-MSN is significantly quicker than FITC-MSN as determined by flow cytometry experiments. The fluorescence confocal microscopy investigation showed the endocytosis of TEG coated-FITC MSN triethylene glycol grafted fluorescein doped MSN (TEG coated-FITC MSN) into both KeLa cells and Tobacco root protoplasts. Once the synthesis of a controlled-release delivery system based on MCM-41-type mesoporous silica nanorods capped by disulfide bonds with superparamagnetic iron oxide nanoparticles was completed. The material was characterized by general methods and the dosage and kinetics of the

  5. A Single-Step Synthesis of Electroactive Mesoporous ProDOT-Silica Structures.

    PubMed

    Kim, Jeonghun; Kim, Byeonggwan; Anand, Chokkalingam; Mano, Ajayan; Zaidi, Javaid S M; Ariga, Katsuhiko; You, Jungmok; Vinu, Ajayan; Kim, Eunkyoung

    2015-07-13

    The single-step preparation of highly ordered mesoporous silica hybrid nanocomposites with conjugated polymers was explored using a novel cationic 3,4-propylenedioxythiophene (ProDOT) surfactant (PrS). The method does not require high-temperature calcination or a washing procedure. The combination of self-assembly of the silica surfactant and in situ polymerization of the ProDOT tail is responsible for creation of the mesoporosity with ultralarge pores, large pore volume, and electroactivity. As this novel material exhibits excellent textural parameters together with electrical conductivity, we believe that this could find potential applications in various fields. This novel concept of creating mesoporosity without a calcination process is a significant breakthrough in the field of mesoporous materials and the method can be further generalized as a rational preparation of various mesoporous hybrid materials having different structures and pore diameters. PMID:26037244

  6. Transcription of G-quartet supramolecular aggregates into hierarchical mesoporous silica nanotubes.

    PubMed

    Min, Liang; Li, Tao; Tan, Qi; Tan, Xiaoping; Pan, Wu; He, Li; Zhang, Jie; Ou, Encai; Xu, Weijian

    2016-05-01

    The use of 5-guanosine monophosphate (GMP) with Sr(2+) ions to form G-quadruplex bundles as supramolecular templates for the preparation of hierarchical mesoporous silica nanotube materials is reported here, and some mesopores with a diameter of 4-22 nm were obtained. Furthermore, some mesopore channels which run perpendicularly to the center axis of the tube and penetrate right through the outer wall of the nanotubes were achieved by removing the templates. Besides, porous hollow silica spheres were obtained by changing some of the reaction conditions during the process of preparation. Their structures are stable even after high temperature calcination. A formation mechanism was proposed and discussed, and their structures were characterized using a number of means including X-ray diffraction, IR spectra, N2 adsorption-desorption isotherms, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). PMID:27068442

  7. A new redox strategy for low-temperature formation of strong basicity on mesoporous silica.

    PubMed

    Zhu, Li; Lu, Feng; Liu, Xiao-Dan; Liu, Xiao-Qin; Sun, Lin-Bing

    2015-06-21

    A redox strategy was designed to generate strong basicity on mesoporous silica by using the redox interaction of a precursor with methanol vapor. The formation of strongly basic sites was realized at 400 °C, which breaks the tradition of thermally induced decomposition that usually requires much higher temperatures (>600 °C). PMID:26006787

  8. Synthesis of stable hollow silica microspheres with mesoporous shell in nonionic W/O emulsion.

    PubMed

    Li, Wenjiang; Sha, Xiaoxiang; Dong, Wenjun; Wang, Zichen

    2002-10-21

    Stable hollow silica microspheres were synthesized by a solgel method in nonionic W/O emulsion; the mesoporous shell wall of the spheres could have potential applications as controlled release capsules for drugs, dyes, cosmetics and inks, artificial cells, catalysts, and fillers. PMID:12430477

  9. Cell-specific intracellular anticancer drug delivery from mesoporous silica nanoparticles with pH sensitivity.

    PubMed

    Luo, Zhong; Cai, Kaiyong; Hu, Yan; Zhang, Beilu; Xu, Dawei

    2012-05-01

    A nanoreservoir for efficient intracellular anticancer drug delivery based on mesoporous silica nanoparticles end-capped with lactobionic acid-grafted bovine serum albumin is fabricated. It demonstrates great potential for both cell-specific endocytosis and intracellular pH-responsive controlled release of drugs. A possible endocytosis pathway/mechanism of the smart controlled drug release system is proposed. PMID:23184747

  10. Functionalization of SBA-15 mesoporous silica by Cu-phosphonate units: Probing of synthesis route

    SciTech Connect

    Laskowski, Lukasz; Laskowska, Magdalena

    2014-12-15

    Mesoporous silica SBA-15 containing propyl-copper phosphonate units was investigated. The structure of mesoporous samples was tested by N{sub 2} isothermal sorption (BET and BHJ analysis), TEM microscopy and X-Ray scattering. Quantitative analysis EDX has given information about proportions between component atoms in the sample. Quantitative elemental analysis has been carried out to support EDX. To examine bounding between copper atoms and phosphonic units the Raman spectroscopy was carried out. As a support of Raman scattering, the theoretical calculations were made based on density functional theory, with the B3LYP method. By comparison of the calculated vibrational spectra of the molecule with experimental results, distribution of the active units inside silica matrix has been determined. - Graphical abstract: The present study is devoted to mesoporous silica SBA-15 containing propyl-copper phosphonate units. The species were investigated to confirm of synthesis procedure correctness by the micro-Raman technique combined with DFT numerical simulations. Complementary research was carried out to test the structure of mesoporous samples. - Highlights: • SBA-15 silica functionalized with propyl-copper phosphonate units was synthesized. • Synthesis efficiency probed by Raman study supported with DFT simulations. • Homogenous distribution of active units was proved. • Synthesis route enables precise control of distance between copper ions.