Sample records for neuquina al sur

  1. Sulfonylureas suppress the stimulatory action of Mg-nucleotides on Kir6.2/SUR1 but not Kir6.2/SUR2A KATP channels: a mechanistic study.

    PubMed

    Proks, Peter; de Wet, Heidi; Ashcroft, Frances M

    2014-11-01

    Sulfonylureas, which stimulate insulin secretion from pancreatic β-cells, are widely used to treat both type 2 diabetes and neonatal diabetes. These drugs mediate their effects by binding to the sulfonylurea receptor subunit (SUR) of the ATP-sensitive K(+) (KATP) channel and inducing channel closure. The mechanism of channel inhibition is unusually complex. First, sulfonylureas act as partial antagonists of channel activity, and second, their effect is modulated by MgADP. We analyzed the molecular basis of the interactions between the sulfonylurea gliclazide and Mg-nucleotides on β-cell and cardiac types of KATP channel (Kir6.2/SUR1 and Kir6.2/SUR2A, respectively) heterologously expressed in Xenopus laevis oocytes. The SUR2A-Y1206S mutation was used to confer gliclazide sensitivity on SUR2A. We found that both MgATP and MgADP increased gliclazide inhibition of Kir6.2/SUR1 channels and reduced inhibition of Kir6.2/SUR2A-Y1206S. The latter effect can be attributed to stabilization of the cardiac channel open state by Mg-nucleotides. Using a Kir6.2 mutation that renders the KATP channel insensitive to nucleotide inhibition (Kir6.2-G334D), we showed that gliclazide abolishes the stimulatory effects of MgADP and MgATP on β-cell KATP channels. Detailed analysis suggests that the drug both reduces nucleotide binding to SUR1 and impairs the efficacy with which nucleotide binding is translated into pore opening. Mutation of one (or both) of the Walker A lysines in the catalytic site of the nucleotide-binding domains of SUR1 may have a similar effect to gliclazide on MgADP binding and transduction, but it does not appear to impair MgATP binding. Our results have implications for the therapeutic use of sulfonylureas. © 2014 Proks et al.

  2. Survival of Phytophthora ramorum following wildfires in the sudden oak death-impacted forests of the Big Sur region

    Treesearch

    Maia M. Beh; Margaret Metz; Kerri Frangioso; David Rizzo

    2013-01-01

    The summer of 2008 brought the first wildfires to occur in known Phytophthora ramorum-infested forests in California, with the largest individual fire burning in the Big Sur region of the central coast (Monterey County) (Metz et al. 2011). More than 100,000 ha in Big Sur were ultimately burned that summer, providing a natural experiment to examine...

  3. Kir6.2 activation by sulfonylurea receptors: a different mechanism of action for SUR1 and SUR2A subunits via the same residues

    PubMed Central

    Principalli, Maria A; Dupuis, Julien P; Moreau, Christophe J; Vivaudou, Michel; Revilloud, Jean

    2015-01-01

    ATP-sensitive potassium channels (K-ATP channels) play a key role in adjusting the membrane potential to the metabolic state of cells. They result from the unique combination of two proteins: the sulfonylurea receptor (SUR), an ATP-binding cassette (ABC) protein, and the inward rectifier K+ channel Kir6.2. Both subunits associate to form a heterooctamer (4 SUR/4 Kir6.2). SUR modulates channel gating in response to the binding of nucleotides or drugs and Kir6.2 conducts potassium ions. The activity of K-ATP channels varies with their localization. In pancreatic β-cells, SUR1/Kir6.2 channels are partly active at rest while in cardiomyocytes SUR2A/Kir6.2 channels are mostly closed. This divergence of function could be related to differences in the interaction of SUR1 and SUR2A with Kir6.2. Three residues (E1305, I1310, L1313) located in the linker region between transmembrane domain 2 and nucleotide-binding domain 2 of SUR2A were previously found to be involved in the activation pathway linking binding of openers onto SUR2A and channel opening. To determine the role of the equivalent residues in the SUR1 isoform, we designed chimeras between SUR1 and the ABC transporter multidrug resistance-associated protein 1 (MRP1), and used patch clamp recordings on Xenopus oocytes to assess the functionality of SUR1/MRP1 chimeric K-ATP channels. Our results reveal that the same residues in SUR1 and SUR2A are involved in the functional association with Kir6.2, but they display unexpected side-chain specificities which could account for the contrasted properties of pancreatic and cardiac K-ATP channels. PMID:26416970

  4. AirMSPI PODEX BigSur Terrain Images

    Atmospheric Science Data Center

    2013-12-13

    ... Browse Images from the PODEX 2013 Campaign   Big Sur target (Big Sur, California) 02/03/2013 Terrain-projected   Select ...   Version number   For more information, see the Data Product Specifications (DPS)   ...

  5. Requirement of Sur2 for Efficient Replication of Mouse Adenovirus Type 1

    PubMed Central

    Fang, Lei; Stevens, Jennitte L.; Berk, Arnold J.; Spindler, Katherine R.

    2004-01-01

    Mouse adenovirus type 1 (MAV-1) early region 1A (E1A) encodes a virulence gene in viral infection of mice. To broaden our understanding of the functions of E1A in MAV-1 pathogenesis, an unbiased experimental approach, glutathione S-transferase (GST) pulldown, was used to screen for cellular proteins that interact with E1A protein. We identified mouse Sur2, a subunit of Mediator complex, as a protein that binds to MAV-1 E1A. The interaction between Sur2 and MAV-1 E1A was confirmed in virus-infected cells. Conserved region 3 (CR3) of MAV-1 E1A was mapped as the region required for Sur2-E1A interaction, as is the case for human adenovirus E1A. Although it has been proposed that human adenovirus E1A recruits the Mediator complex to transactivate transcription of viral early genes, Sur2 function in adenovirus replication has not been directly tested previously. Studies on the functions of Sur2 with mouse embryonic fibroblasts (MEFs) showed that there was a multiplicity-dependent growth defect of MAV-1 in Sur2−/− MEFs compared to Sur2+/+ MEFs. Comparison of the viral DNA and viral mRNA levels in Sur2+/+ and Sur2−/− MEFs confirmed that Sur2 was important for efficient viral replication. The viral replication defects in Sur2−/− MEFs appeared to be due at least in part to a defect in viral early gene transcription. PMID:15542641

  6. Diffuse Scattering in the Icosahedral AL-Li-Cu Quasicrystal

    NASA Astrophysics Data System (ADS)

    Proult, A.; Donnadieu, P.; Wang, K.; Garoche, P.

    1995-12-01

    Electron diffraction patterns of icosahedral quasicrystals frequently exhibit diffuse scattering features. We report a detailed analysis of diffuse scattering in Al{6}Li{3}Cu (T2) quasicrystalline samples. The samples have been specifically heat-treated which allows to observe pronounced diffuse effects. Diffuse streaks are observed along the 5-fold and 2-fold symmetry axes and are elongated perpendicularly to these directions. These streaks are due to discs in the 3-dimensional reciprocal space. The diffuse disc positions are only indexable in the 6-dimensional hyperspace but the disc intensities do not agree with the ones predicted by the Cut-and-Project method. The diffuse discs we observed seem to be related to an original quasicrystalline phenomenon overlapping with the icosahedral phase. Les diagrammes de diffraction électronique des quasicristaux icosaédriques présentent fréquemment des diffusions diffuses. Nous les analysons ici en détails sur des échantillons de phase quasicristalline Al{6}Li{3}Cu (T2) traités thermiquement dans lesquels les diffusions diffuses sont trés prononcées. Les intensités diffuses forment des batônnets centrés sur des positions appartenant aux rangées réciproques d'ordre 5 et d'ordre 2 et allongés perpendiculairement à ces directions. On montre qu'il s'agit en fait de disques diffus. dans le réseau réciproque à 3 dimensions, dont les positions ne peuvent s'indexer que sur le réseau à 6 dimensions. Toutefois, les intensités ne correspondent pas à celle prédites par l'algorithme de Coupe-et-Projection. Les disques de diffusion diffuse semblent relever d'une organisation quasicristalline originale se superposant à la phase icosaédrique.

  7. Little Ice Age versus Present Day: Comparison of Temperature, Precipitation and Seasonality in Speleothem Records from the Han-sur-Lesse Cave, Belgium.

    NASA Astrophysics Data System (ADS)

    Vansteenberge, S.; Van Opdenbosch, J.; Van Rampelbergh, M.; Verheyden, S.; Keppens, E.; Cheng, H.; Edwards, R. L.; Claeys, P. F.

    2015-12-01

    The Proserpine stalagmite is a 2 m large, tabular-shaped speleothem located in the Han-sur-Lesse cave in Belgium. The speleothem formed over the last 1000 years and is still growing. High-accuracy U/Th datings have indicated exceptionally high growth-rates of up to 2 mm per year. This, together with a well expressed annual layering, makes the Proserpine stalagmite an ideal candidate for high-resolution paleoclimate reconstructions of the last millennium. Previous work, including over 10 years of cave monitoring, has already learned us how short-term, i.e. decadal to seasonal, climate variations are incorporated within speleothem calcite from the Han-sur-Lesse cave system. It has been shown that δ18O and δ13C stable isotopes and trace element proxies of recently formed calcite reflect seasonal variations in temperature and precipitation of the near-cave environment (Verheyden et al, 2008; Van Rampelbergh et al., 2014). Now, this knowledge was used to infer local climate parameters further back in time to the period of +/- 1620-1630 CE, corresponding to one of the cold peaks within the Little Ice Age. Speleothem calcite was sampled at sub-annual resolution, with approximately 11 samples per year, for stable isotope analysis. LA-ICP-MS and µXRF analyses resulted in time series of trace elements. Preliminary results indicate a well expressed seasonal signal in δ13C and trace element composition but a multi-annual to decadal trend in δ18O. This combined proxy study eventually enables comparison of the expression of seasonality and longer term climate variations between a Little Ice Age cold peak and Present Day. References: Verheyden, S. et al., 2008, Monitoring climatological, hydrological and geochemical parameters in the Père Noël cave (Belgium): implication for the interpretation of speleothem isotopic and geochemical time-series. International Journal of Speleology, 37(3), 221-234. Van Rampelbergh, M. et al., 2014, Seasonal variations recorded in cave

  8. Structure of Thermotoga maritima Stationary Phase Survival Protein SurE: A Novel Acid Phosphatase

    PubMed Central

    Zhang, R.-G.; Skarina, T.; Katz, J.E.; Beasley, S.; Khachatryan, A.; Vyas, S.; Arrowsmith, C.H.; Clarke, S.; Edwards, A.; Joachimiak, A.; Savchenko, A.

    2009-01-01

    Summary Background The rpoS, nlpD, pcm, and surE genes are among many whose expression is induced during the stationary phase of bacterial growth. rpoS codes for the stationary-phase RNA polymerase σ subunit, and nlpD codes for a lipoprotein. The pcm gene product repairs damaged proteins by converting the atypical isoaspartyl residues back to L-aspartyls. The physiological and biochemical functions of surE are unknown, but its importance in stress is supported by the duplication of the surE gene in E. coli subjected to high-temperature growth. The pcm and surE genes are highly conserved in bacteria, archaea, and plants. Results The structure of SurE from Thermotoga maritima was determined at 2.0 Å. The SurE monomer is composed of two domains; a conserved N-terminal domain, a Rossman fold, and a C-terminal oligomerization domain, a new fold. Monomers form a dimer that assembles into a tetramer. Biochemical analysis suggests that SurE is an acid phosphatase, with an optimum pH of 5.5–6.2. The active site was identified in the N-terminal domain through analysis of conserved residues. Structure-based site-directed point mutations abolished phosphatase activity. T. maritima SurE intra- and inter-subunit salt bridges were identified that may explain the SurE thermostability. Conclusions The structure of SurE provided information about the protein’s fold, oligomeric state, and active site. The protein possessed magnesium-dependent acid phosphatase activity, but the physiologically relevant substrate(s) remains to be identified. The importance of three of the assigned active site residues in catalysis was confirmed by site-directed mutagenesis. PMID:11709173

  9. Finding the SurPriSe: A Case Study of a Faculty Learning Community

    ERIC Educational Resources Information Center

    Michel, Roberta M.

    2014-01-01

    This article details a faculty learning community (FLC) that started in 2009 on the campus of a Midwestern University and has evolved into an interdisciplinary research, teaching and social community of practice and learning called SurPriSe. SurPriSe is an acronym that reflects the interest area of the FLC; Sur for surveillance, Pri for privacy,…

  10. Fires Burning near Big Sur, California

    NASA Image and Video Library

    2008-06-30

    Fires near Big Sur, Calif., continued to burn unchecked when the Advanced Spaceborne Thermal Emission and Reflection Radiometer ASTER instrument on NASA Terra satellite captured this image on Sunday, June 29, 2008.

  11. SurR9C84A protects and recovers human cardiomyocytes from hypoxia induced apoptosis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ashok, Ajay; Department of Pathology, Case Western Reserve University, 2103 Cornell Rd. WRB 5128, Cleveland, OH 44106-7288; Kanwar, Jagat Rakesh

    Survivin, as an anti-apoptotic protein and a cell cycle regulator, is recently gaining importance for its regenerative potential in salvaging injured hypoxic cells of vital organs such as heart. Different strategies are being employed to upregulate survivin expression in dying hypoxic cardiomyocytes. We investigated the cardioprotective potential of a cell permeable survivin mutant protein SurR9C84A, for the management of hypoxia mediated cardiomyocyte apoptosis, in a novel and clinically relevant model employing primary human cardiomyocytes (HCM). The aim of this research work was to study the efficacy and mechanism of SurR9C84A facilitated cardioprotection and regeneration in hypoxic HCM. To mimic hypoxicmore » microenvironment in vitro, well characterized HCM were treated with 100 µm (48 h) cobalt chloride to induce hypoxia. Hypoxia induced (HI) HCM were further treated with SurR9C84A (1 µg/mL) in order to analyse its cardioprotective efficacy. Confocal microscopy showed rapid internalization of SurR9C84A and scanning electron microscopy revealed the reinstatement of cytoskeleton projections in HI HCM. SurR9C84A treatment increased cell viability, reduced cell death via, apoptosis (Annexin-V assay), and downregulated free cardiac troponin T and MMP-9 expression. SurR9C84A also upregulated the expression of proliferation markers (PCNA and Ki-67) and downregulated mitochondrial depolarization and ROS levels thereby, impeding cell death. Human Apoptosis Array further revealed that SurR9C84A downregulated expression of pro-apoptotic markers and augmented expression of HSPs and HTRA2/Omi. SurR9C84A treatment led to enhanced levels of survivin, VEGF, PI3K and pAkt. SurR9C84A proved non-toxic to normoxic HCM, as validated through unaltered cell proliferation and other marker levels. Its pre-treatment exhibited lesser susceptibility to hypoxia/damage. SurR9C84A holds a promising clinical potential for human cardiomyocyte survival and proliferation following hypoxic

  12. Nicotinamide-rich diet improves physical endurance by up-regulating SUR2A in the heart

    PubMed Central

    Sukhodub, Andriy; Sudhir, Rajni; Du, Qingyou; Jovanović, Sofija; Reyes, Santiago; Jovanović, Aleksandar

    2011-01-01

    Abstract SUR2A is an ATP-binding protein that serves as a regulatory subunit of cardioprotective ATP-sensitive K+ (KATP) channels. Based on signalling pathway regulating SUR2A expression and SUR2A role in regulating numbers of fully assembled KATP channels, we have suggested that nicotinamide-rich diet could improve physical endurance by stimulating SUR2A expression. We have found that mice on nicotinamide-rich diet significantly improved physical endurance, which was associated with significant increase in expression of SUR2A. Transgenic mice with solely overexpressed SUR2A on control diet had increased physical endurance in a similar manner as the wild-type mice on nicotinamide-rich diet. The experiments focused on action membrane potential and intracellular Ca2+ concentration have demonstrated that increased SUR2A expression was associated with the activation of sarcolemmal KATP channels and steady Ca2+ levels in cardiomyocytes in response to β-adrenergic stimulation. In contrast, the same challenge in the wild-type was characterized by a lack of the channel activation and rise in intracellular Ca2+. Nicotinamide-rich diet was ineffective to increase physical endurance in mice lacking KATP channels. This study has shown that nicotinamide-rich diet improves physical endurance by increasing expression of SUR2A and that this is a sole mechanism of the nicotinamide-rich diet effect. The obtained results suggest that oral nicotinamide is a regulator of SUR2A expression and has a potential as a drug that can improve physical endurance in conditions where this effect would be desirable. PMID:20731746

  13. 46 CFR 7.130 - Point Conception, CA to Point Sur, CA.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... LINES Pacific Coast § 7.130 Point Conception, CA to Point Sur, CA. (a) A line drawn from the... 46 Shipping 1 2014-10-01 2014-10-01 false Point Conception, CA to Point Sur, CA. 7.130 Section 7... Breakwater. (b) A line drawn from the outer end of Morro Bay Entrance East Breakwater to latitude 35°21.5′ N...

  14. 46 CFR 7.130 - Point Conception, CA to Point Sur, CA.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... LINES Pacific Coast § 7.130 Point Conception, CA to Point Sur, CA. (a) A line drawn from the... 46 Shipping 1 2011-10-01 2011-10-01 false Point Conception, CA to Point Sur, CA. 7.130 Section 7... Breakwater. (b) A line drawn from the outer end of Morro Bay Entrance East Breakwater to latitude 35°21.5′ N...

  15. 46 CFR 7.130 - Point Conception, CA to Point Sur, CA.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... LINES Pacific Coast § 7.130 Point Conception, CA to Point Sur, CA. (a) A line drawn from the... 46 Shipping 1 2013-10-01 2013-10-01 false Point Conception, CA to Point Sur, CA. 7.130 Section 7... Breakwater. (b) A line drawn from the outer end of Morro Bay Entrance East Breakwater to latitude 35°21.5′ N...

  16. 46 CFR 7.130 - Point Conception, CA to Point Sur, CA.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... LINES Pacific Coast § 7.130 Point Conception, CA to Point Sur, CA. (a) A line drawn from the... 46 Shipping 1 2012-10-01 2012-10-01 false Point Conception, CA to Point Sur, CA. 7.130 Section 7... Breakwater. (b) A line drawn from the outer end of Morro Bay Entrance East Breakwater to latitude 35°21.5′ N...

  17. 46 CFR 7.130 - Point Conception, CA to Point Sur, CA.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... LINES Pacific Coast § 7.130 Point Conception, CA to Point Sur, CA. (a) A line drawn from the... 46 Shipping 1 2010-10-01 2010-10-01 false Point Conception, CA to Point Sur, CA. 7.130 Section 7... Breakwater. (b) A line drawn from the outer end of Morro Bay Entrance East Breakwater to latitude 35°21.5′ N...

  18. SurF: an innovative framework in biosecurity and animal health surveillance evaluation.

    PubMed

    Muellner, Petra; Watts, Jonathan; Bingham, Paul; Bullians, Mark; Gould, Brendan; Pande, Anjali; Riding, Tim; Stevens, Paul; Vink, Daan; Stärk, Katharina Dc

    2018-05-16

    Surveillance for biosecurity hazards is being conducted by the New Zealand Competent Authority, the Ministry for Primary Industries (MPI) to support New Zealand's biosecurity system. Surveillance evaluation should be an integral part of the surveillance life cycle, as it provides a means to identify and correct problems and to sustain and enhance the existing strengths of a surveillance system. The surveillance evaluation Framework (SurF) presented here was developed to provide a generic framework within which the MPI biosecurity surveillance portfolio, and all of its components, can be consistently assessed. SurF is an innovative, cross-sectoral effort that aims to provide a common umbrella for surveillance evaluation in the animal, plant, environment and aquatic sectors. It supports the conduct of the following four distinct components of an evaluation project: (i) motivation for the evaluation, (ii) scope of the evaluation, (iii) evaluation design and implementation and (iv) reporting and communication of evaluation outputs. Case studies, prepared by MPI subject matter experts, are included in the framework to guide users in their assessment. Three case studies were used in the development of SurF in order to assure practical utility and to confirm usability of SurF across all included sectors. It is anticipated that the structured approach and information provided by SurF will not only be of benefit to MPI but also to other New Zealand stakeholders. Although SurF was developed for internal use by MPI, it could be applied to any surveillance system in New Zealand or elsewhere. © 2018 2018 The Authors. Transboundary and Emerging Diseases Published by Blackwell Verlag GmbH.

  19. AirMSPI PODEX Big Sur Ellipsoid Images

    Atmospheric Science Data Center

    2013-12-11

    ... Browse Images from the PODEX 2013 Campaign   Big Sur target 02/03/2013 Ellipsoid-projected   Select link to ...   Version number   For more information, see the  Data Product Specifications (DPS) ...

  20. Effets des electrons secondaires sur l'ADN

    NASA Astrophysics Data System (ADS)

    Boudaiffa, Badia

    Les interactions des electrons de basse energie (EBE) representent un element important en sciences des radiations, particulierement, les sequences se produisant immediatement apres l'interaction de la radiation ionisante avec le milieu biologique. Il est bien connu que lorsque ces radiations deposent leur energie dans la cellule, elles produisent un grand nombre d'electrons secondaires (4 x 104/MeV), qui sont crees le long de la trace avec des energies cinetiques initiales bien inferieures a 20 eV. Cependant, il n'y a jamais eu de mesures directes demontrant l'interaction de ces electrons de tres basse energie avec l'ADN, du principalement aux difficultes experimentales imposees par la complexite du milieu biologique. Dans notre laboratoire, les dernieres annees ont ete consacrees a l'etude des phenomenes fondamentaux induits par impact des EBE sur differentes molecules simples (e.g., N2, CO, O2, H2O, NO, C2H 4, C6H6, C2H12) et quelques molecules complexes dans leur phase solide. D'autres travaux effectues recemment sur des bases de l'ADN et des oligonucleotides ont montre que les EBE produisent des bris moleculaires sur les biomolecules. Ces travaux nous ont permis d'elaborer des techniques pour mettre en evidence et comprendre les interactions fondamentales des EBE avec des molecules d'interet biologique, afin d'atteindre notre objectif majeur d'etudier l'effet direct de ces particules sur la molecule d'ADN. Les techniques de sciences des surfaces developpees et utilisees dans les etudes precitees peuvent etre etendues et combinees avec des methodes classiques de biologie pour etudier les dommages de l'ADN induits par l'impact des EBE. Nos experiences ont montre l'efficacite des electrons de 3--20 eV a induire des coupures simple et double brins dans l'ADN. Pour des energies inferieures a 15 eV, ces coupures sont induites par la localisation temporaire d'un electron sur une unite moleculaire de l'ADN, ce qui engendre la formation d'un ion negatif transitoire

  1. Adolescence et pornographie sur la toile

    PubMed Central

    Haza, Marion

    2012-01-01

    Dans cet article, nous abordons la question de l’accès à la pornographie sur Internet par les adolescents. Nous déclinons plusieurs facettes de ces rencontres: la rencontre «fortuite», quand les adolescents sont confrontés à des images intempestives, des publicités ou spams avec des contenus pornographiques; la rencontre «spectatrice», quand les adolescents cherchent activement des vidéos ou photos mettant en scène la sexualité; et enfin la rencontre «actrice», quand les adolescents se mettent en scène eux-mêmes, seuls ou à plusieurs, de façon pornographique sur le Net. A partir d’exemple, nous réfléchissons aux enjeux de ces rencontres virtuelles précoces de la sexualité adulte par rapport au développement adolescent et à la représentation de leur propre sexualité en construction. PMID:22876261

  2. GSTAR-SUR Modeling With Calendar Variations And Intervention To Forecast Outflow Of Currencies In Java Indonesia

    NASA Astrophysics Data System (ADS)

    Akbar, M. S.; Setiawan; Suhartono; Ruchjana, B. N.; Riyadi, M. A. A.

    2018-03-01

    Ordinary Least Squares (OLS) is general method to estimates Generalized Space Time Autoregressive (GSTAR) parameters. But in some cases, the residuals of GSTAR are correlated between location. If OLS is applied to this case, then the estimators are inefficient. Generalized Least Squares (GLS) is a method used in Seemingly Unrelated Regression (SUR) model. This method estimated parameters of some models with residuals between equations are correlated. Simulation study shows that GSTAR with GLS method for estimating parameters (GSTAR-SUR) is more efficient than GSTAR-OLS method. The purpose of this research is to apply GSTAR-SUR with calendar variation and intervention as exogenous variable (GSTARX-SUR) for forecast outflow of currency in Java, Indonesia. As a result, GSTARX-SUR provides better performance than GSTARX-OLS.

  3. Evaluation d'impact sur la santé et évaluation d'impact sur l'équité en santé : éventail de pratiques et questions de recherche.

    PubMed

    Villeval, Mélanie; Bidault, Elsa; Lang, Thierry

    2016-09-01

    L'Evaluation d'Impact sur la Santé (EIS) se développe au niveau international et est encore au stade émergent en France. Elle vise à évaluer les effets positifs et négatifs potentiels d'un projet, d'un programme ou d'une politique sur la santé. L'objectif est de produire des recommandations en direction des décideurs, afin d'en maximiser les effets positifs et d'en diminuer les effets négatifs. L'EIS est un moyen particulièrement intéressant d'action sur les déterminants de la santé au-delà des comportements individuels et du système de santé. Les politiques de logement, de transport, de solidarité, économiques, etc. ont, en effet, des impacts souvent non prévus sur la santé. Au-delà des effets sur la santé, l'EIS doit aussi permettre d'apprécier la distribution de ces effets dans la population.Si la préoccupation pour l'équité en santé est centrale dans l'EIS, elle reste cependant difficilement traduite en pratique. Face à cette difficulté, des démarches d'évaluation d'impact ont été développées pour renforcer la prise en compte de l'équité à chaque étape de l'EIS ou « Equity Focused Health Impact Assessment », ou prendre en compte les impacts sur les inégalités de santé de façon spécifique. Ainsi, l'Evaluation de l'Impact sur l'Equité en Santé (EIES) semble, par exemple, particulièrement intéressante pour évaluer l'impact sur les inégalités de projets dans le champ sanitaire.L'EIS et l'EIES posent de nombreuses questions de recherche, notamment autour de la réunion, dans une même démarche, du politique, du citoyen et de l'expert. La participation des populations vulnérables potentiellement affectées par la politique évaluée est une valeur centrale de l'EIS, mais pose des questions d'acceptabilité sociale. La collaboration avec les décideurs politiques est également un enjeu majeur. Les difficultés méthodologiques, notamment de quantification des impacts, peuvent constituer des freins à la promotion

  4. The big sur ecoregion sudden oak death adaptive management project: ecological monitoring

    Treesearch

    Allison C. Wickland; Kerri M. Frangioso; David M. Rizzo; Ross K. Meentemeyer

    2008-01-01

    The Big Sur area is one of the most ecologically diverse regions in California. Land preservation efforts are well established in Big Sur, including numerous preserves, state parks and the Los Padres National Forest. However, there are still many conservation threats that cut across these areas including exotic species (plants, animals, and pathogens) and alterations...

  5. 46 CFR 7.135 - Point Sur, CA to Cape Blanco, OR.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Pacific Coast § 7.135 Point Sur, CA to Cape Blanco, OR. (a) A line drawn from Monterey Harbor Light “6” to latitude 36°36.5′ N. longitude 121°53.2′ W. (Monterey Harbor Anchorage Buoy “A”); thence to the... 46 Shipping 1 2010-10-01 2010-10-01 false Point Sur, CA to Cape Blanco, OR. 7.135 Section 7.135...

  6. 46 CFR 7.135 - Point Sur, CA to Cape Blanco, OR.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Pacific Coast § 7.135 Point Sur, CA to Cape Blanco, OR. (a) A line drawn from Monterey Harbor Light “6” to latitude 36°36.5′ N. longitude 121°53.2′ W. (Monterey Harbor Anchorage Buoy “A”); thence to the... 46 Shipping 1 2014-10-01 2014-10-01 false Point Sur, CA to Cape Blanco, OR. 7.135 Section 7.135...

  7. 46 CFR 7.135 - Point Sur, CA to Cape Blanco, OR.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Pacific Coast § 7.135 Point Sur, CA to Cape Blanco, OR. (a) A line drawn from Monterey Harbor Light “6” to latitude 36°36.5′ N. longitude 121°53.2′ W. (Monterey Harbor Anchorage Buoy “A”); thence to the... 46 Shipping 1 2013-10-01 2013-10-01 false Point Sur, CA to Cape Blanco, OR. 7.135 Section 7.135...

  8. 46 CFR 7.135 - Point Sur, CA to Cape Blanco, OR.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Pacific Coast § 7.135 Point Sur, CA to Cape Blanco, OR. (a) A line drawn from Monterey Harbor Light “6” to latitude 36°36.5′ N. longitude 121°53.2′ W. (Monterey Harbor Anchorage Buoy “A”); thence to the... 46 Shipping 1 2012-10-01 2012-10-01 false Point Sur, CA to Cape Blanco, OR. 7.135 Section 7.135...

  9. ATP-sensitive potassium currents from channels formed by Kir6 and a modified cardiac mitochondrial SUR2 variant

    PubMed Central

    Aggarwal, Nitin T; Shi, Nian-Qing; Makielski, Jonathan C

    2013-01-01

    Cardiac ATP-sensitive potassium channels (KATP) are found in both the sarcoplasmic reticulum (sarcKATP) and the inner membrane of mitochondria (mitoKATP). SarcKATP are composed of a pore containing subunit Kir6.2 and a regulatory sulfonylurea receptor subunit (SUR2), but the composition of mitoKATP remains unclear. An unusual intra-exonic splice variant of SUR2 (SUR2A-55) was previously identified in mitochondria of mammalian heart and brain, and by analogy with sarcKATP we proposed SUR2A-55 as a candidate regulatory subunit of mitoKATP. Although SUR2A-55 lacks the first nucleotide binding domain (NBD) and 2 transmembrane domains (TMD), it has a hybrid TMD and retains the second NBD. It resembles a hemi-ABC transporter suggesting it could multimerize to function as a regulatory subunit. A putative mitochondrial targeting signal in the N-terminal domain of SUR2A-55 was removed by truncation and when co-expressed with Kir6.1 and Kir6.2 it targeted to the plasma membrane and yielded KATP currents. Single channel conductance, mean open time, and burst open time of SUR2A-55 based KATP was similar to the full-length SUR2A based KATP. However, the SUR2A-55 KATP were 70-fold less sensitive to block by ATP, and twice as resistant to intracellular Ca2+ inhibition compared with the SUR2A KATP, and were markedly insensitive to KATP drugs, pinacidil, diazoxide, and glybenclamide. These results suggest that the SUR2A-55 based channels would tend to be open under physiological conditions and in ischemia, and could account for cardiac and mitochondrial phenotypes protective for ischemia. PMID:24037327

  10. The ATP-sensitive potassium (KATP) channel-encoded dSUR gene is required for Drosophila heart function and is regulated by tinman

    PubMed Central

    Akasaka, Takeshi; Klinedinst, Susan; Ocorr, Karen; Bustamante, Erika L.; Kim, Seung K.; Bodmer, Rolf

    2006-01-01

    The homeobox transcription factor Tinman plays an important role in the initiation of heart development. Later functions of Tinman, including the target genes involved in cardiac physiology, are less well studied. We focused on the dSUR gene, which encodes an ATP-binding cassette transmembrane protein that is expressed in the heart. Mammalian SUR genes are associated with KATP (ATP-sensitive potassium) channels, which are involved in metabolic homeostasis. We provide experimental evidence that Tinman directly regulates dSUR expression in the developing heart. We identified a cis-regulatory element in the first intron of dSUR, which contains Tinman consensus binding sites and is sufficient for faithful dSUR expression in the fly’s myocardium. Site-directed mutagenesis of this element shows that these Tinman sites are critical to dSUR expression, and further genetic manipulations suggest that the GATA transcription factor Pannier is synergistically involved in cardiac-restricted dSUR expression in vivo. Physiological analysis of dSUR knock-down flies supports the idea that dSUR plays a protective role against hypoxic stress and pacing-induced heart failure. Because dSUR expression dramatically decreases with age, it is likely to be a factor involved in the cardiac aging phenotype of Drosophila. dSUR provides a model for addressing how embryonic regulators of myocardial cell commitment can contribute to the establishment and maintenance of cardiac performance. PMID:16882722

  11. Diffraction de rayons X sur les plaquettes de fer durcies par cyanuration

    NASA Astrophysics Data System (ADS)

    Popescu, M.; Hoyer, W.; Stegarescu, M.; Cornet, A.; Broll, N.

    2004-11-01

    Une méthode de cyanuration a été developpée pour les surfaces des plaquettes de fer, basée sur une réaction thermochimique qui conduit à la formation des couches dures sur le métal. Les échantillons ont été analysés, pour de temps différents de traitement, par diffraction de rayons X et par mesures de dureté.

  12. Inhibition of SUR1 Decreases the Vascular Permeability of Cerebral Metastases1

    PubMed Central

    Thompson, Eric M; Pishko, Gregory L; Muldoon, Leslie L; Neuwelt, Edward A

    2013-01-01

    Inhibition of sulfonylurea receptor 1 (SUR1) by glyburide has been shown to decrease edema after subarachnoid hemorrhage. We investigated if inhibiting SUR1 reduces cerebral edema due to metastases, the most common brain tumor, and explored the putative association of SUR1 and the endothelial tight junction protein, zona occludens-1 (ZO-1). Nude rats were intracerebrally implanted with small cell lung carcinoma (SCLC) LX1 or A2058 melanoma cells (n = 36). Rats were administered vehicle, glyburide (4.8 µg twice, orally), or dexamethasone (0.35 mg, intravenous). Blood-tumor barrier (BTB) permeability (Ktrans) was evaluated before and after treatment using dynamic contrast-enhanced magnetic resonance imaging. SUR1 and ZO-1 expression was evaluated using immunofluorescence and Western blots. In both models, SUR1 expression was significantly increased (P < .05) in tumors. In animals with SCLC, control mean Ktrans (percent change ± standard error) was 101.8 ± 36.6%, and both glyburide (-21.4 ± 14.2%, P < .01) and dexamethasone (-14.2 ± 13.1%, P < .01) decreased BTB permeability. In animals with melanoma, compared to controls (117.1 ± 43.4%), glyburide lowered BTB permeability increase (3.2 ± 15.4%, P < .05), while dexamethasone modestly lowered BTB permeability increase (63.1 ± 22.1%, P > .05). Both glyburide (P < .001) and dexamethasone (P < .01) decreased ZO-1 gap formation. By decreasing ZO-1 gaps, glyburide was at least as effective as dexamethasone at halting increased BTB permeability caused by SCLC and melanoma. Glyburide is a safe, inexpensive, and efficacious alternative to dexamethasone for the treatment of cerebral metastasis-related vasogenic edema. PMID:23633925

  13. Lignes directrices simplifiées sur les lipides

    PubMed Central

    Allan, G. Michael; Lindblad, Adrienne J.; Comeau, Ann; Coppola, John; Hudson, Brianne; Mannarino, Marco; McMinis, Cindy; Padwal, Raj; Schelstraete, Christine; Zarnke, Kelly; Garrison, Scott; Cotton, Candra; Korownyk, Christina; McCormack, James; Nickel, Sharon; Kolber, Michael R.

    2015-01-01

    Résumé Objectif Produire un guide de pratique clinique comportant une approche simplifiée à la prévention primaire des maladies cardiovasculaires (MCV), en insistant sur l’estimation du risque de MCV et la prise en charge des profils lipidiques à l’intention des cliniciens de soins primaires et leurs équipes; nous avons recherché la contribution de professionnels des soins primaires qui n’avaient que peu ou pas de conflits d’intérêts et nous nous sommes concentrés sur les données probantes de la plus haute qualité accessibles. Méthodes Neuf professionnels de la santé (4 médecins de famille, 2 internistes, 1 infirmière praticienne, 1 infirmière autorisée et 1 pharmacienne) et 1 membre non votant (pharmacienne gestionnaire de projet) formaient le comité principal appelé le Lipid Pathway Committee (le comité). La sélection des membres s’est fondée sur la profession, le milieu de pratique et son emplacement. Les membres ont divulgué tous leurs conflits d’intérêts potentiels ou réels. Le processus d’élaboration des lignes directrices était itératif et s’appuyait sur des affichages en ligne, une révision détaillée des données probantes, des réunions par téléphone et en ligne. Le comité a cerné 12 questions prioritaires à répondre. Le groupe de révision des données probantes a répondu à ces questions. À la suite d’un examen des réponses, les principales recommandations ont été formulées par consensus du comité. Nous avons produit une ébauche des lignes directrices qui a ensuite été peaufinée, distribuée à un groupe de cliniciens (médecins de famille, autres spécialistes, pharmaciens, infirmières et infirmières praticiennes) et à des patients pour obtenir de la rétroaction, la réviser en conséquence et le comité l’a ensuite finalisée. Recommandations Des recommandations sont présentées concernant le dépistage et les analyses, les évaluations du risque, le suivi, de même que le r

  14. The Sur7 Protein Regulates Plasma Membrane Organization and Prevents Intracellular Cell Wall Growth in Candida albicans

    PubMed Central

    Alvarez, Francisco J.; Douglas, Lois M.; Rosebrock, Adam

    2008-01-01

    The Candida albicans plasma membrane plays important roles in cell growth and as a target for antifungal drugs. Analysis of Ca-Sur7 showed that this four transmembrane domain protein localized to stable punctate patches, similar to the plasma membrane subdomains known as eisosomes or MCC that were discovered in S. cerevisiae. The localization of Ca-Sur7 depended on sphingolipid synthesis. In contrast to S. cerevisiae, a C. albicans sur7Δ mutant displayed defects in endocytosis and morphogenesis. Septins and actin were mislocalized, and cell wall synthesis was very abnormal, including long projections of cell wall into the cytoplasm. Several phenotypes of the sur7Δ mutant are similar to the effects of inhibiting β-glucan synthase, suggesting that the abnormal cell wall synthesis is related to activation of chitin synthase activity seen under stress conditions. These results expand the roles of eisosomes by demonstrating that Sur7 is needed for proper plasma membrane organization and cell wall synthesis. A conserved Cys motif in the first extracellular loop of fungal Sur7 proteins is similar to a characteristic motif of the claudin proteins that form tight junctions in animal cells, suggesting a common role for these tetraspanning membrane proteins in forming specialized plasma membrane domains. PMID:18799621

  15. Regard sur les lazarets en terre canadienne

    PubMed Central

    Milot, Jean

    2008-01-01

    Puisant dans les nombreuses références qu’offrent les publications médicales canadiennes du milieu du XIXe siècle à nos jours, l’auteur fait découvrir l’existence de lazarets en terre canadienne, décrit l’impact de la maladie sur les conditions vie des lépreux qui y étaient confinés et en souligne les contrecoups tant sur le plan physique et psychologique que social. Il présente un bref aperçu de la maladie, ses symptômes, ses signes ainsi que ses complications oculaires et rappelle les premiers moyens thérapeutiques à base d’huile de chaulmoogra introduits dans la colonie de Tracadie vers 1901. Il illustre son propos en évoquant la vie dans les lazarets de l’île de Sheldrake (1844–1848) et de Tracadie (1848–1965) au Nouveau-Brunswick, puis dans ceux des îles D’Arcy (1891–1924) et de Bentinck (1924–1957) en Colombie-Britannique. PMID:19352451

  16. Influence des elements d'addition Ti, Nb, Al sur la structure et les proprietes mecaniques en traction et en fluage (de 298 A 1023 K) des alliages a base de fer et de nickel du type IN 706

    NASA Astrophysics Data System (ADS)

    Aubert, H.; Laniesse, J.; Lelong, C.; Pigoury, M.

    1981-09-01

    L'étude a porté sur 13 alliages du type IN 706 dont un alliage commercial et des alliages expérimentaux ayant une teneur en éléments durcissants niobium, titane, aluminium assez différente de celle de la nuance commerciale. On montre l'effet de la composition sur la structure et sur la cinétique de précipitation des phases stables et métastables. On décrit les propriétés mécaniques à l'état précipité: dureté, résistance à la traction, caractéristiques de fluage. Il est conclu que des alliages relativement pauvres en éléments durcissants peuvent convenir à la rélisation de gaines pour les réacteurs à neutrons rapides.

  17. [Territorial mobility of women in Neuquina localities].

    PubMed

    Kloster, E E

    1995-01-01

    The Argentinean province of Neuquen, which has the second highest population growth rate in Argentina, has experienced a high degree of territorial mobility of both sexes since the 1970s. Census and survey data were used to study migratory movements since 1970 in three localities in western Neuquen that had high rates of female migration. One of them, San Martin de los Andes, had a 1991 population of 14,431 and an average annual rate of growth of 42/1000 between 1970 and 1991. Natives of Neuquen represented 54% of the population in 1970 and 60% in 1991. The proportion of migrants from other provinces was 30% in 1970 and 27.3% in 1991, while that of foreigners declined from 16.5% to 12.7%. The great majority of foreigners were from Chile. The proportion of women from other countries, although declining, exceeded that of men in 1970 and in 1991. Most of the population 0-19 years old was born in the province of Neuquen. In the age group 20-64, only about half were natives of the province. Comparison of the educational levels of female migrants from different places of origin showed significant differences. Tourism in San Martin de los Andes has generated employment, much of it seasonal. Female migrants from other provinces arrived after 1980 for the most part and were 20-40 years old. Most of the Chilean women arrived between 1970 and 1980 and had a greater age range. Women from other parts of Neuquen province were mostly over 40 and had the lowest educational level, with many not completing primary school. Migrants from metropolitan Buenos Aires and other nonneighboring provinces had the highest educational level, followed by the Chileans. Natives of San Martin de los Andes were more educated than those from other parts of Neuquen province, but less educated than the other groups. The women who migrated had many reasons for doing so, but the search for work was an important motivation.

  18. Adsorption de gaz sur les materiaux microporeux modelisation, thermodynamique et applications

    NASA Astrophysics Data System (ADS)

    Richard, Marc-Andre

    2009-12-01

    Nos travaux sur l'adsorption de gaz dans les materiaux microporeux s'inscrivent dans le cadre des recherches visant a augmenter l'efficacite du stockage de l'hydrogene a bord des vehicules. Notre objectif etait d'etudier la possibilite d'utiliser l'adsorption afin d'ameliorer l'efficacite de la liquefaction de l'hydrogene des systemes a petite echelle. Nous avons egalement evalue les performances d'un systeme de stockage cryogenique de l'hydrogene base sur la physisorption. Comme nous avons affaire a des plages de temperatures particulierement etendues et a de hautes pressions dans la region supercritique du gaz, nous avons du commencer par travailler sur la modelisation et la thermodynamique de l'adsorption. La representation de la quantite de gaz adsorbee en fonction de la temperature et de la pression par un modele semi-empirique est un outil utile pour determiner la masse de gaz adsorbee dans un systeme mais egalement pour calculer les effets thermiques lies a l'adsorption. Nous avons adapte le modele Dubinin-Astakhov (D-A) pour modeliser des isothermes d'adsorption d'hydrogene, d'azote et de methane sur du charbon actif a haute pression et sur une grande plage de temperatures supercritiques en considerant un volume d'adsorption invariant. Avec cinq parametres de regression (incluant le volume d'adsorption Va), le modele que nous avons developpe permet de tres bien representer des isothermes experimentales d'adsorption d'hydrogene (de 30 a 293 K, jusqu'a 6 MPa), d'azote (de 93 a 298 K, jusqu'a 6 MPa) et de methane (de 243 a 333 K, jusqu'a 9 MPa) sur le charbon actif. Nous avons calcule l'energie interne de la phase adsorbee a partir du modele en nous servant de la thermodynamique des solutions sans negliger le volume d'adsorption. Par la suite, nous avons presente les equations de conservation de la niasse et de l'energie pour un systeme d'adsorption et valide notre demarche en comparant des simulations et des tests d'adsorption et de desorption. En plus de l

  19. Hydrogenation of GaAs covered by GaAlAs and subgrain boundary passivation

    NASA Astrophysics Data System (ADS)

    Djemel, A.; Castaing, J.; Chevallier, J.; Henoc, P.

    1992-12-01

    Cathodoluminescence (CL) has been performed to study the influence of hydrogen on electronic properties of GaAs with and without a GaAlAs layer. Recombination at sub-boundaries has been examined. These extended defects have been introduced by high temperature plastic deformation. The results show that they are passivated by hydrogen. The penetration of hydrogen is slowed down by the GaAlAs layer. La cathodoluminescence (CL) a été utilisée pour étudier l'influence de l'hydrogène sur les propriétés électroniques de GaAs nu et recouvert d'une couche de GaAlAs. Le caractère recombinant des sous-joints de grains a été examiné. Ces défauts étendus ont été introduits par déformation plastique à chaud. Les résultats montrent que l'hydrogène passive ces défauts. La pénétration de l'hydrogène à l'intérieur de GaAs est retardée par la présence de la couche de GaAlAs.

  20. Uranium-series ages of marine terraces, La Paz Peninsula, Baja California Sur, Mexico

    USGS Publications Warehouse

    Sirkin, L.; Szabo, B. J.; Padilla, G.A.; Pedrin, S.A.; Diaz, E.R.

    1990-01-01

    Uranium-series dating of coral samples from raised marine terrace deposits between 1.5 and 10 m above sea level in the La Paz Peninsula area, Baja California Sur, yielded ages between 123 ka and 138 ka that are in agreement with previously reported results. The stratigraphy and ages of marine units near the El Coyote Arroyo indicate the presence of two high stands of the sea during the last interglacial or oxygen isotope substage 5e at about 140 ka and 123 ka. Accepting 5 m for the sea level during the last interglacial transgression, we calculate average uplift rates for the marine terraces of about ???70 mm/ka and 40 mm/ka. These slow rates of uplift indicate a relative stability of the La Paz peninsula area for the past 140 000 years. In contrast, areas of Baja California affected by major faultf experienced higher rates of uplift. Rockwell et al. (1987) reported vertical uplift rates of 180 to 300 mm/ka at Punta Banda within the Aqua Blanea fault zone in northern Baja California. ?? 1990 Springer-Verlag.

  1. Origin of the Energy Barrier to Chemical Reactions of O2 on Al(111): Evidence for Charge Transfer, Not Spin Selection

    DTIC Science & Technology

    2012-11-08

    change of O2 spin, at the barrier [Fig. 3]; i.e., the corresponding diabatic surfaces cross. Far from the Al surface, the triplet state is...previous theoretical models, in particular nonadiabatic [17] or diabatic [16] approaches, which also find an energy barrier consistent with experiment...crossings of different diabatic O2 spin configuration sur- faces are accommodated by small spin fluctuations within the metal surface. For parallel

  2. Coastal management at Ojo de Liebre, Baja California Sur

    Treesearch

    Frederico Salinas-Zavala; Alfredo Ortega-Rubio; Diego Valez-Zamudio; Aradit Castelanos-Vera

    2000-01-01

    We analyzed the biotic, abiotic, and human components interacting at the coastal zone of the Ojo de Liebre Lagoon, Baja California Sur, Mexico. Using geographic information systems, satellite images, and the main biological, physical, and socioeconomic components, we developed an environmental characterization of the zone. According with the natural features of the...

  3. Fine Structure of Diffuse Scattering Rings in Al-Li-Cu Quasicrystal: A Comparative X-ray and Electron Diffraction Study

    NASA Astrophysics Data System (ADS)

    Donnadieu, P.; Dénoyer, F.

    1996-11-01

    A comparative X-ray and electron diffraction study has been performed on Al-Li-Cu icosahedral quasicrystal in order to investigate the diffuse scattering rings revealed by a previous work. Electron diffraction confirms the existence of rings but shows that the rings have a fine structure. The diffuse aspect on the X-ray diffraction patterns is then due to an averaging effect. Recent simulations based on the model of canonical cells related to the icosahedral packing give diffractions patterns in agreement with this fine structure effect. Nous comparons les diagrammes de diffraction des rayon-X et des électrons obtenus sur les mêmes échantillons du quasicristal icosaèdrique Al-Li-Cu. Notre but est d'étudier les anneaux de diffusion diffuse mis en évidence par un travail précédent. Les diagrammes de diffraction électronique confirment la présence des anneaux mais ils montrent aussi que ces anneaux possèdent une structure fine. L'aspect diffus des anneaux révélés par la diffraction des rayons X est dû à un effet de moyenne. Des simulations récentes basées sur la décomposition en cellules canoniques de l'empilement icosaédrique produisent des diagrammes de diffraction en accord avec ces effects de structure fine.

  4. 2010 Coalition Battle Management Language Workshop (Atelier 2010 sur le langage de gestion du champ de bataille pour les operations en coalition)

    DTIC Science & Technology

    2010-02-01

    Feb 2010 2010 Coalition Battle Management Language Workshop (Atelier 2010 sur le langage de gestion du champ de bataille pour les opérations en...RTO MEETING PROCEEDINGS MP-MSG-079 2010 Coalition Battle Management Language Workshop (Atelier 2010 sur le langage de gestion du champ de ...RTO-MP-MSG-079 ES - 3 Atelier 2010 sur le langage de gestion du champ de bataille pour les opérations en coalition (RTO-MP-MSG-079

  5. Topical Ophthalmic Formulation of Trichostatin A and SurR9-C84A for Quick Recovery Post-alkali Burn of Corneal Haze

    PubMed Central

    Roy, Kislay; Cheung, Chun Hei Antonio; Kanwar, Rupinder K.; Sandhir, Rajat; Kanwar, Jagat R.

    2017-01-01

    Alkali burn injury is a true ocular emergency of the conjunctiva and cornea that requires immediate precision. Lack of an immediate therapy can lead to a substantial damage in the ocular surface and anterior segment further causing visual impairment and disfigurement. We explored the regenerative capability of dominant negative survivin protein (SurR9-C84A) and histone deacetylase inhibitor trichostatin-A (TSA) in vivo, in a rat alkali burn model. A topical insult in rat eyes with NaOH led to degradation of the conjunctival and corneal epithelium. The integrity of the conjunctival and corneal tissue was increased by TSA and SurR9-C84A by improving the clathrin and claudin expressions. Wound healing was initiated by an increase in TGF-beta-1 and, increased endogenous survivin which inhibited apoptosis post-TSA and SurR9-C84A treatments. Protein expressions of fibronectin and alpha-integrin 5 were found to increase promoting corneal integrity. The cytokine analysis confirmed increased expressions of IL-1beta, IL-6, IL-12, IL-13, IFN-gamma, TNF-alpha, GMCSF, Rantes, and MMP-2 in injured cornea, which were found to be significantly downregulated by the combined treatment of SurR9-C84A and TSA. The ocular and systemic pharmacokinetic (PK) parameters were measured post-topical ocular administration of TSA and SurR9-C84A. The SurR9-C84A and TSA sustained relatively longer in the cornea, conjunctiva, and aqueous humor than in the tear fluid and plasma. Our results confirmed that a combination of TSA with SurR9-C8A worked in synergy and showed a promising healing and anti-inflammatory effect in a very short time against alkali burn. Therefore, a combination of TSA and SurR9-C84A can fulfill the need for an immediate response to wound healing in alkali burnt cornea. We also synthesized ultra-small chitosan nanoparticles (USC-NPs) targeted with alpha-SMA antibodies that can be used for delivery of TSA and SurR9-C84A specifically to the ocular burn site. PMID:28529481

  6. Embedded Gaussian unitary ensembles with U(Ω)⊗SU(r) embedding generated by random two-body interactions with SU(r) symmetry

    NASA Astrophysics Data System (ADS)

    Vyas, Manan; Kota, V. K. B.

    2012-12-01

    Following the earlier studies on embedded unitary ensembles generated by random two-body interactions [EGUE(2)] with spin SU(2) and spin-isospin SU(4) symmetries, developed is a general formulation, for deriving lower order moments of the one- and two-point correlation functions in eigenvalues, that is valid for any EGUE(2) and BEGUE(2) ("B" stands for bosons) with U(Ω)⊗SU(r) embedding and with two-body interactions preserving SU(r) symmetry. Using this formulation with r = 1, we recover the results derived by Asaga et al. [Ann. Phys. (N.Y.) 297, 344 (2002)], 10.1006/aphy.2002.6248 for spinless boson systems. Going further, new results are obtained for r = 2 (this corresponds to two species boson systems) and r = 3 (this corresponds to spin 1 boson systems).

  7. A Recommended Methodology for Quantifying NDE/NDI Based on Aircraft Engine Experience (Le Projet de Methodologie Pour l’Evaluation du Controle Non- Destructif Fonde sur l’Experience Acquise sur les moteurs d’Avions)

    DTIC Science & Technology

    1993-04-01

    Non-Destructif LECT E Fond6 sur l’Exp6rience Acquise .E Iuu sur les Moteurs dAvions) S JUL The material in this publication was assembled to support a...detection de dtfauts des organes des moteurs . Les confkrences sont destinies a tous ceux qui sont impliquds dans la garantie de la qualitW de fabrication, la...be more of an notches, the specimens should be further issue for the inspection of actual stress cycled to break the crack through any meta tht my

  8. Taos Smart Growth Implementation Assistance: Concepts for the Paseo del Pueblo Sur Corridor

    EPA Pesticide Factsheets

    This report describes a technical assistance project with Taos, NM, to help make development along State Highway 68, the Paseo del Pueblo Sur commercial corridor, economically stronger and more attractive.

  9. Impact de la preparation des anodes crues et des conditions de cuisson sur la fissuration dans des anodes denses

    NASA Astrophysics Data System (ADS)

    Amrani, Salah

    La fabrication de l'aluminium est realisee dans une cellule d'electrolyse, et cette operation utilise des anodes en carbone. L'evaluation de la qualite de ces anodes reste indispensable avant leur utilisation. La presence des fissures dans les anodes provoque une perturbation du procede l'electrolyse et une diminution de sa performance. Ce projet a ete entrepris pour determiner l'impact des differents parametres de procedes de fabrication des anodes sur la fissuration des anodes denses. Ces parametres incluent ceux de la fabrication des anodes crues, des proprietes des matieres premieres et de la cuisson. Une recherche bibliographique a ete effectuee sur tous les aspects de la fissuration des anodes en carbone pour compiler les travaux anterieurs. Une methodologie detaillee a ete mise au point pour faciliter le deroulement des travaux et atteindre les objectifs vises. La majorite de ce document est reservee pour la discussion des resultats obtenus au laboratoire de l'UQAC et au niveau industriel. Concernant les etudes realisees a l'UQAC, une partie des travaux experimentaux est reservee a la recherche des differents mecanismes de fissuration dans les anodes denses utilisees dans l'industrie d'aluminium. L'approche etait d'abord basee sur la caracterisation qualitative du mecanisme de la fissuration en surface et en profondeur. Puis, une caracterisation quantitative a ete realisee pour la determination de la distribution de la largeur de la fissure sur toute sa longueur, ainsi que le pourcentage de sa surface par rapport a la surface totale de l'echantillon. Cette etude a ete realisee par le biais de la technique d'analyse d'image utilisee pour caracteriser la fissuration d'un echantillon d'anode cuite. L'analyse surfacique et en profondeur de cet echantillon a permis de voir clairement la formation des fissures sur une grande partie de la surface analysee. L'autre partie des travaux est basee sur la caracterisation des defauts dans des echantillons d'anodes crues

  10. Mining activities and arsenic in a Baja California Sur watershed

    Treesearch

    Alejandro Naranjo-Pulido; Alfredo Ortega-Rubio; Baudillo Acost-Vargas; Lia Rodriguez-Mendez; Marcos Acevedo-Beltran; Cerafina Arguelles-Mendez

    2000-01-01

    Mining is one of the most important sources of income for the Baja California Sur state. This state is the second most important area for mineral (gold, silver, copper) and non-mineral (salt) mining activities in the Mexican Republic. In the San Antonio-El Triunfo region, mineral-mining activities flourished during the 19th century. Tons of debris containing a high...

  11. Exposure to 15% oxygen in vivo up-regulates cardioprotective SUR2A without affecting ERK1/2 and AKT: a crucial role for AMPK.

    PubMed

    Mohammed Abdul, Khaja Shameem; Jovanović, Sofija; Jovanović, Aleksandar

    2017-07-01

    SUR2A is an 'atypical' ABC protein that forms sarcolemmal ATP-sensitive K + (K ATP ) channels by binding to inward rectifier Kir6.2. Manipulation with SUR2A levels has been suggested to be a promising therapeutic strategy against ischaemic heart diseases and other diseases where increased heart resistance to stress is beneficial. Some years ago, it has been reported that high-altitude residents have lower mortality rates for ischaemic heart disease. The purpose of this study was to determine whether SUR2A is regulated by mild-to-severe hypoxic conditions (15% oxygen; oxygen tension equivalent to 3000 m above sea level) and elucidate the underlying mechanism. Mice were exposed to either to 21% (control) or 15% concentration of oxygen for 24 hrs. Twenty-four hours long exposure to 15% oxygen decreased partial pressure of O2 (PO 2 ), but did not affect blood CO 2 (PCO 2 ), haematocrit nor levels of ATP, lactate and NAD+/NADH in the heart. Cardiac SUR2A levels were significantly increased while Kir6.2 levels were not affected. Hypoxia did not induce phosphorylation of extracellular signal-regulated kinases (ERK1/2) or protein kinase B (Akt), but triggered phosphorylation of AMP activated protein kinase (AMPK). AICAR, an activator of AMPK, increased the level of SUR2A in H9c2 cells. We conclude that oxygen increases SUR2A level by activating AMPK. This is the first account of AMPK-mediated regulation of SUR2A. © 2017 The Authors. Journal of Cellular and Molecular Medicine published by John Wiley & Sons Ltd and Foundation for Cellular and Molecular Medicine.

  12. Three C-terminal residues from the sulphonylurea receptor contribute to the functional coupling between the KATP channel subunits SUR2A and Kir6.2

    PubMed Central

    Dupuis, Julien P; Revilloud, Jean; Moreau, Christophe J; Vivaudou, Michel

    2008-01-01

    Cardiac ATP-sensitive potassium (KATP) channels are metabolic sensors formed by the association of the inward rectifier potassium channel Kir6.2 and the sulphonylurea receptor SUR2A. SUR2A adjusts channel gating as a function of intracellular ATP and ADP and is the target of pharmaceutical openers and blockers which, respectively, up- and down-regulate Kir6.2. In an effort to understand how effector binding to SUR2A translates into Kir6.2 gating modulation, we examined the role of a 65-residue SUR2A fragment linking transmembrane domain TMD2 and nucleotide-binding domain NBD2 that has been shown to interact with Kir6.2. This fragment of SUR2A was replaced by the equivalent residues of its close homologue, the multidrug resistance protein MRP1. The chimeric construct was expressed in Xenopus oocytes and characterized using the patch-clamp technique. We found that activation by MgADP and synthetic openers was greatly attenuated although apparent affinities were unchanged. Further chimeragenetic and mutagenetic studies showed that mutation of three residues, E1305, I1310 and L1313 (rat numbering), was sufficient to confer this defective phenotype. The same mutations had no effects on channel block by the sulphonylurea glibenclamide or by ATP, suggesting a role for these residues in activatory – but not inhibitory – transduction processes. These results indicate that, within the KATP channel complex, the proximal C-terminal of SUR2A is a critical link between ligand binding to SUR2A and Kir6.2 up-regulation. PMID:18450778

  13. Les enjuex éthiques entourant la recherche en santé sur les enfants

    PubMed Central

    2008-01-01

    RÉSUMÉ La recherche en santé est un devoir moral parce qu’elle est la base des soins probants prodigués par tous les dispensateurs de soins. Des politiques et des règlements précis régissent la tenue des recherches sur des humains. Il faut procéder à une évaluation éthique d’un projet de recherche donné avant de pouvoir l’entreprendre. La recherche sur les enfants pose d’énormes défis en matière de consentement éclairé et d’assentiment, de vulnérabilité et de potentiel de conflit d’intérêts (CDI). Les chercheurs en santé pédiatrique devraient prôner la participation des enfants à la recherche, tout en se montrant attentifs à en limiter les risques.

  14. Lambeau Expanse du Cuir Chevelu dans la Couverture des Alopecies Cicatricielles sur Sequelles de Brulures. A Propos d'une Observation

    PubMed Central

    El Mazouz, S.; Hafidi, J.; Fejjal, N.; Mejjati, H.; Cherkab, L.; Gharib, N.; Abbassi, A.

    2010-01-01

    Summary Les séquelles esthétiques des alopécies cicatricielles sur séquelles de brûlures sont responsables de préjudices empêchant parfois la réinsertion sociale du patient, surtout chez les sujets de sexe féminin. Le cuir chevelu permet la réalisation de lambeaux permettant de couvrir ces alopécies. Les Auteurs décrivent le cas d'une jeune patiente victime d'une alopécie cicatricielle sur séquelles de brûlures chez qui ils ont réalisé un lambeau expansé du cuir chevelu et mettent le point sur la prise en charge de ces lésions à travers ce cas clinique et une revue de littérature. PMID:21991195

  15. Flight Experience, Risk Taking, and Hazardous Attitudes in Glider Instructors (Experience de vol, Prise de Risque et Attitudes Dangereuses des Instructeurs de vol sur Planeur)

    DTIC Science & Technology

    2010-11-01

    sur planeur . On a également examiné le rôle que jouent l’expérience de vol et la propension à prendre des risques dans le but d’anticiper les...données transversales, obtenues par l’observation de 144 instructeurs de vol sur planeur , en activité ou non, œuvrant dans cinq centres de vol à...137 Sommaire ..... Expérience de vol, prise de risque et attitudes dangereuses des instructeurs de vol sur planeur Ann-Renee Blais

  16. Soilscapes in the dynamic tropical environments: The case of Sierra Madre del Sur

    NASA Astrophysics Data System (ADS)

    Krasilnikov, P. V.; García-Calderón, N. E.; Ibáñez-Huerta, A.; Bazán-Mateos, M.; Hernández-Santana, J. R.

    2011-12-01

    The paper gives an analysis of the pattern of soil cover of the Sierra Madre del Sur, one of the most complex physiographic regions of Mexico. It presents the results of the study of four latitudinal traverses across the region. We show that the distribution of soils in the Sierra Madre del Sur is associated with major climatic gradients, namely by vertical bioclimatic zonality in the mountains and by the effect of mountain shadow. Altitudinal distribution of soil-bioclimatic belts is complex due to non-uniform gradients of temperature and rainfall, and varies with the configuration of the mountain range. The distribution of soils is associated with the erosion and accumulation rates both on mountain slopes and in river valleys. The abundance of poorly developed soils in (semi)arid areas was ascribed to high erosion rate rather than to low pedogenetic potential. The formation of soil mosaic at a larger scale might be ascribed to the complex net of gully erosion and to the system of seismically triggered landslides of various ages. In the valleys, the distribution of soils depends upon the dynamics of sedimentation and erosion, which eventually exposes paleosols. Red-colored clayey sediments are remains of ancient weathering and pedogenesis. Their distribution is associated mainly with the intensity of recent slope processes. The soil cover pattern of the Sierra Madre del Sur cannot be explained by simplified schemes of bioclimatic zonality. The soil ranges can be explained by the distribution of climates, lithology, complex geological history of the region, and recent geomorphological processes.

  17. Reflections on "Petit Battement sur le Cou de Pied": Is It Still Relevant?

    ERIC Educational Resources Information Center

    Paskevska, Anna

    2007-01-01

    This article presents multiple perspectives of "petit battement sur le cou de pied". These perspectives include historical, biomechanical, and pedagogic points of view. The article offers useful information for ballet specialists and applied research studies aimed at ballet pedagogy. (Contains 2 tables and 5 figures.)

  18. Comparative evaluation of SUV, tumor-to-blood standard uptake ratio (SUR), and dual time point measurements for assessment of the metabolic uptake rate in FDG PET.

    PubMed

    Hofheinz, Frank; Hoff, Jörg van den; Steffen, Ingo G; Lougovski, Alexandr; Ego, Kilian; Amthauer, Holger; Apostolova, Ivayla

    2016-12-01

    We have demonstrated recently that the tumor-to-blood standard uptake ratio (SUR) is superior to tumor standardized uptake value (SUV) as a surrogate of the metabolic uptake rate K m of fluorodeoxyglucose (FDG), overcoming several of the known shortcomings of the SUV approach: excellent linear correlation of SUR and K m from Patlak analysis was found using dynamic imaging of liver metastases. However, due to the perfectly standardized uptake period used for SUR determination and the comparatively short uptake period, these results are not automatically valid and applicable for clinical whole-body examinations in which the uptake periods (T) are distinctly longer and can vary considerably. Therefore, the aim of this work was to investigate the correlation between SUR derived from clinical static whole-body scans and K m-surrogate derived from dual time point (DTP) measurements. DTP (18)F-FDG PET/CT was performed in 90 consecutive patients with histologically proven non-small cell lung cancer (NSCLC). In the PET images, the primary tumor was delineated with an adaptive threshold method. For determination of the blood SUV, an aorta region of interest (ROI) was delineated manually in the attenuation CT and transferred to the PET image. Blood SUV was computed as the mean value of the aorta ROI. SUR values were computed as ratio of tumor SUV and blood SUV. SUR values from the early time point of each DTP measurement were scan time corrected to 75 min postinjection (SURtc). As surrogate of K m, we used the SUR(T) slope, K slope, derived from DTP measurements since it is proportional to the latter under the given circumstances. The correlation of SUV and SURtc with K slope was investigated. The prognostic value of SUV, SURtc, and K slope for overall survival (OS) and progression-free survival (PFS) was investigated with univariate Cox regression in a homogeneous subgroup (N=31) treated with primary chemoradiation. Correlation analysis revealed for both, SUV and SURtc, a

  19. Compactification de la Supergravite 10-D Sur les Varietes de Calabi-Yau

    NASA Astrophysics Data System (ADS)

    Gagnon, Michel

    Les varietes de Calabi-Yau permettent une description relativement simple et assez juste de la realite. Recemment, de nombreuses equipes de recherche s'y sont interessees, en particulier P. Candelas, A. M. Dale, C. A. Lutken et R. Schimmrigk (13) qui ont propose une liste de 7868 configurations distinctes. Toutefois, nous croyons que certaines des techniques qui sont exploitees pour construire cette liste ne sont pas suffisamment justifiees et ont pour effet de soustraire a nos investigations bon nombre de configurations potentiellement interessantes. Ainsi, nous produisons, sans utiliser ces techniques simplificatrices, une liste de 97360 configurations. Ensuite, dans le cadre des modeles a 4 generations, nous appliquons un ensemble de criteres, fondes sur les symetries discretes, pour delimiter le domaine des configurations phenomenologiquement viables. Finalement, apres avoir fixe notre choix sur une configuration particuliere, nous essayons de montrer tout l'interet physique des varietes de Calabi-Yau en exposant certains aspects de la phenomenologie a basse energie, notamment les nombres quantiques, les spectres fermioniques, la brisure intermediaire du groupe de jauge et la duree de vie du proton.

  20. Effets de la pollution de l’air sur la santé

    PubMed Central

    Abelsohn, Alan; Stieb, Dave M.

    2011-01-01

    Résumé Objectif Faire connaître aux médecins de famille les effets de la pollution atmosphérique sur la santé et indiquer quels conseils donner aux patients vulnérables pour qu’ils soient moins exposés. Sources de l’information On a consulté MEDLINE à l’aide des termes relatifs à la pollution atmosphérique et à ses effets indésirables. On a révisé les articles en anglais publiés entre janvier 2008 et décembre 2009. La plupart des études contenaient des preuves de niveau II. Principal message Au Canada, la pollution de l’air extérieur cause une morbidité et une mortalité importantes. Elle peut affecter le système respiratoire (exacerbation de l’asthme et de la maladie pulmonaire obstructive chronique) et le système cardiovasculaire (déclencher l’arythmie, l’insuffisance cardiaque et les AVC). La cote air santé (CAS) est un nouvel outil de communication mis au point par Santé Canada et Environnement Canada qui indique sur une échelle de 1 à 10, le risque pour la santé causé par la pollution atmosphérique. La CAS est largement diffusée dans les médias et cet outil pourrait être utile au médecin de famille pour inciter les patients à haut risque (comme ceux qui souffrent d’asthme, de maladie pulmonaire obstructive chronique ou d’insuffisance cardiaque) à réduire leur exposition à la pollution atmosphérique. Conclusion Le médecin de famille peut se servir de la CAS et de ses messages sur la santé pour enseigner aux asthmatiques et aux autres patients à risque élevé la façon de réduire les risques pour la santé causés par la pollution atmosphérique.

  1. Object-oriented code SUR for plasma kinetic simulation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Levchenko, V.D.; Sigov, Y.S.

    1995-12-31

    We have developed a self-consistent simulation code based on object-oriented model of plasma (OOMP) for solving the Vlasov/Poisson (V/P), Vlasov/Maxwell (V/M), Bhatnagar-Gross-Krook (BGK) as well as Fokker-Planck (FP) kinetic equations. The application of an object-oriented approach (OOA) to simulation of plasmas and plasma-like media by means of splitting methods permits to uniformly describe and solve the wide circle of plasma kinetics problems, including those being very complicated: many-dimensional, relativistic, with regard for collisions, specific boundary conditions etc. This paper gives the brief description of possibilities of the SUR code, as a concrete realization of OOMP.

  2. Effets de la formation sur la violence conjugale

    PubMed Central

    Zaher, Eman; Keogh, Kelly; Ratnapalan, Savithiri

    2014-01-01

    Résumé Objectif Décrire et évaluer l’efficacité de la formation concernant la violence conjugale pour améliorer les connaissances et permettre la reconnaissance et la prise en charge par les médecins des femmes victimes de violence. Sources des données On a fait une recension dans la base de données des révisions systématiques de Cochrane, MEDLINE, PubMed, PsycINFO, ERIC et EMBASE pour trouver des articles publiés entre le 1e janvier 2000 et le 1e novembre 2012. Des recherches manuelles ont complété cette recension pour cerner des articles pertinents à l’aide d’une stratégie de recherche combinant des textes, mots et expressions MeSH. Sélection des études On a choisi des études randomisées contrôlées qui portaient sur des interventions éducatives à l’intention des médecins et fournissaient des données sur les effets des interventions. Synthèse On a inclus 9 études randomisées contrôlées qui décrivaient différentes approches pédagogiques et diverses mesures des résultats. Trois études examinaient les effets d’interventions éducatives pour des médecins en formation postdoctorale et ont constaté une augmentation des connaissances, mais il n’y a eu aucun changement dans le comportement en ce qui a trait à l’identification des victimes de violence conjugale. Six études portaient sur des interventions éducatives pour des médecins en pratique active. Trois d’entre elles utilisaient une approche à multiples facettes pour les médecins, qui combinait une formation ainsi que des interventions de soutien de la part du système pour changer les comportements des médecins, comme une sensibilisation générale accrue à la violence conjugale au moyen de brochures et d’affiches, des aide-mémoire pour rappeler aux médecins comment identifier les victimes, des moyens pour faciliter l’accès des médecins à des services de soutien pour les victimes, la réalisation d’audits et la fourniture de rétroaction. Les

  3. Test-Retest Variability in Lesion SUV and Lesion SUR in 18F-FDG PET: An Analysis of Data from Two Prospective Multicenter Trials.

    PubMed

    Hofheinz, Frank; Apostolova, Ivayla; Oehme, Liane; Kotzerke, Jörg; van den Hoff, Jörg

    2017-11-01

    Quantitative assessment of radio- and chemotherapy response with 18 F-FDG whole-body PET has attracted increasing interest in recent years. In most published work, SUV has been used for this purpose. In the context of therapy response assessment, the reliability of lesion SUVs, notably their test-retest stability, thus becomes crucial. However, a recent study demonstrated substantial test-retest variability (TRV) in SUVs. The purpose of the present study was to investigate whether the tumor-to-blood SUV ratio (SUR) can improve TRV in tracer uptake. Methods: 73 patients with advanced non-small cell lung cancer from the prospective multicenter trials ACRIN 6678 ( n = 34) and MK-0646-008 ( n = 39) were included in this study. All patients underwent two 18 F-FDG PET/CT investigations on two different days (time difference, 3.6 ± 2.1 d; range, 1-7 d) before therapy. For each patient, up to 7 tumor lesions were evaluated. For each lesion, SUV max and SUV peak were determined. Blood SUV was determined as the mean value of a 3-dimensional aortic region of interest that was delineated on the attenuation CT image and transferred to the PET image. SURs were computed as the ratio of tumor SUV to blood SUV and were uptake time-corrected to 75 min after injection. TRV was quantified as 1.96 multiplied by the root-mean-square deviation of the fractional paired differences in SUV and SUR. The combined effect of blood normalization and uptake time correction was inspected by considering R TRV (TRV SUR /TRV SUV ), a ratio reflecting the reduction in the TRV in SUR relative to SUV. R TRV was correlated with the group-averaged-value difference (δ) in CF mean (δCF mean ) of the quantity δCF = |CF - 1|, where CF is the numeric factor that converts individual ratios of paired SUVs into corresponding SURs. This correlation analysis was performed by successively increasing a threshold value δCF min and computing δCF mean and R TRV for the remaining subgroup of patients/lesions with

  4. Proceedings from the DRG Seminar on Robotics in the Battlefield (31st) Held on 6-8 March 1991 in Paris, France. Volume A (Actes du 31ieme Seminaire sur la Robotique du Champ de Bataille, Groupe sur la Recherche pour la Defense).

    DTIC Science & Technology

    1992-06-01

    que ce que l’on peut esp~rer avec des hommes. Le second serait un robot de renseignement, sorte d’unit6 4 recherche dans la profondeur , mis en place par...3 1ime Seminaire sur la robotique du champ de Bataille Groupe sur la Recherche pour la Defense S92-25111 92 9 14 00O ;-" SANS CLASSIFICATION...6l6mentaires de pilotage d’un v~hicule en vue d’en am~liorer et d’en simplifier la t~l6commandabilit6 by M. Urvoy - Adaptation de l’algorithme A * 6 la

  5. Impact de la varicocèle sur le volume testiculaire et les paramètres spermatiques

    PubMed Central

    Benazzouz, Mohamed Hicham; Essatara, Younes; El Sayegh, Hachem; Iken, Ali; Benslimane, Lounis; Nouini, Yassine

    2014-01-01

    Introduction La varicocèle est une pathologie masculine fréquente dont l'incidence est encore plus importante dans dans la population des hommes infertiles. Si ses mécanismes sont à ce jour incomplètement expliqués il semble acquis que la varicocèle peut être associée a une dysfonction testiculaire avec diminution du volume testiculaire et de la concentration en spermatozoïde de l’éjaculat. Méthodes Dans un premier temps nous exposons les résultats d'une étude rétrospective sur 5 ans (de Mars 2009 à Mars 2014), réalisée au service d'urologie A de l'hôpital Ibn Sina de Rabat et ayant comme objectif d’évaluer l'impact de la varicocèle palpable sur le volume testiculaire et les paramètres spermatiques. Tous les patients inclus dans notre étude avaient une varicocèle palpable. Dans un deuxième temps, et à travers une revue de la littérature nous discutons l'impact du traitement de la varicocèle sur la fertilité. Résultats 39 patients ont été inclus dans notre étude. L’âge moyen était de 29,71 ans et la varicocèle siégeait dans 89,74% des cas du coté gauche. Une atrophie testiculaire homolatérale à la varicocèle était retrouvée dans 7% des cas alors que des anomalies du spermogramme se voyaient dans 69,23% des cas. Conclusion L'impact de la varicocèle sur l'altération des paramètres spermatiques a été clairement établi bien que sa physio pathogénie ne soit pas bien élucidée. Le traitement chirurgical de la varicocèle semble indiqué chez les hommes infertiles présentant une varicocèle clinique et une altération significative du sperme. PMID:25918574

  6. Rupture utérine sur utérus bicorne à 12 semaines d'aménorrhée: à propos d'un cas

    PubMed Central

    Itchimouh, Sanaa; Khabtou, Karima; Mahdaoui, Sakher; Boufettal, Houssine; Samouh, Naima

    2016-01-01

    La fréquence des malformations utérines ayant un impact sur la reproduction est difficile à apprécier. Leur mise en évidence nécessite un bilan spécifique (hystérosalpingographie, hystéroscopie, cœlioscopie). La fertilité spontanée peut être altérée en fonction du type d'anomalie utérine. Toutes ces anomalies peuvent avoir des répercussions sur l’évolution de la conception à type de fausses couches précoces et tardives, de grossesse extra utérine, de menace d'accouchement prématuré, d'accouchement prématuré, de pathologies vasculaires gravidiques et de retard de croissance intra-utérin. L'utérus bicorne est la plus connue des malformations et représente environ la moitié des anomalies de l'utérus. La survenue d'une telle grossesse constitue une situation à risque pouvant entraîner une mort maternelle, mais le diagnostic précoce et un bon suivi peut mener des grossesses à terme sur des utérus malformé. Le dépistage échographique devrait permettre la détection systématique de ce genre de cas afin de prendre préventivement les mesures qui s'imposent. Nous rapportons un cas de rupture utérine sur utérus bicorne unicervical sur grossesse à 12 semaines d'aménorrhée. PMID:27642490

  7. Perspective sur les ruptures d’approvisionnement de médicaments en établissement de santé de 2006 à 2010

    PubMed Central

    Bussières, Jean-François; Chiveri, Andrei; Lebel, Denis

    2011-01-01

    RÉSUMÉ Contexte: Si les ruptures d’approvisionnement de médicaments font partie de la réalité de la pratique pharmaceutique depuis plusieurs décennies, elles deviennent une préoccupation quotidienne pour les pharmaciens dans les années 2000 et dépassent les frontières de la littérature pharmaceutique. Objectif: L’objectif principal de cette étude était de quantifier le nombre de médicaments en rupture de stock par année et la durée de ces interruptions. L’objectif secondaire visait à décrire le nombre de médicaments en rupture de stock par fabricant et par classe thérapeutique. Méthode: Cette étude descriptive et rétrospective des ruptures d’approvisionnement en médicaments a porté sur l’ensemble des médicaments à contrat pour les hôpitaux des régions administratives de Montréal, de Laval et de l’Estrie, au Québec. Le nombre de ruptures de stocks, le nombre de jours de rupture de stock et leur durée moyenne par année ont été calculés par fabricant et par classe thérapeutique. De plus, la proportion de produits en rupture de stock et la proportion de jours de rupture de stocks ont été déterminées par classe thérapeutique. Les données ont été analysées à l’aide de statistiques descriptives (c.-à-d. somme, moyenne, écart-type, médiane, intervalle). Résultats: Entre le 1er janvier 2006 et le 31 août 2010 (une période de 56 mois), 2400 ruptures de stocks ont été dénombrées pour un total de 258 105 jours de rupture de stocks (durée moyenne de 108 jours, écart-type de 130 jours et intervalle de 5 à 1623 jours). Un total de 70 fabricants étaient impliqués dans la survenue de toutes les ruptures d’approvisionnement de médicaments relevées durant cette période. Cinquante pour cent (50 %) des ruptures de stocks et des jours de rupture de stocks provenaient de quatre fabricants. Les interruptions étudiées touchaient la majorité des classes thérapeutiques de médicaments disponibles sur le

  8. Ability of a rapid HIV testing site to attract and test vulnerable populations: a cross-sectional study on Actuel sur Rue.

    PubMed

    Engler, Kim; Rollet, Kathleen; Lessard, David; Thomas, Réjean; Lebouché, Bertrand

    2016-10-01

    Quebec's HIV epidemic persists, particularly among men who have sex with men (MSM) and in Montreal. Increasing access to HIV testing is necessary and community-based rapid testing offers one strategy. This paper examines the clienteles and activities of a rapid HIV testing site in Montreal, the pilot project Actuel sur Rue. Comparative analyses were conducted with 1357 MSM, 147 heterosexual men and 64 women who visited Actuel sur Rue between July 2012 and November 2013 on socio-demographics, health, drug use, sexual practices/infection and HIV testing/prevention. Significant group differences were observed in each category. Actuel sur Rue received 1901 clients, conducted 1417 rapid HIV tests and tested 77 never-tested individuals. Rapid testing produced a high reactive rate (2%). Only 1/28 of those with reactive tests had no previous HIV testing, and 36% had used post-exposure prophylaxis, suggesting missed opportunities for prevention. Findings highlight diverse client vulnerability profiles and the relevance of checkpoints and further prevention efforts. © The Author(s) 2016.

  9. Quantification of sudden oak death tree mortality in the Big Sur ecoregion of California

    Treesearch

    Douglas A. Shoemaker; Christopher B. Oneal; David M. Rizzo; Ross K. Meentemeyer

    2008-01-01

    Big Sur is one of the most ecologically diverse regions in California and well recognized as a biodiversity hotspot for global conservation priority. Currently the region is experiencing substantial environmental change due to the invasion of Phytophthora ramorum, the plant pathogen causing the forest disease known as sudden oak death. First...

  10. Epithelioma Spinocellulaire sur Cicatrice de Brulure (a Propos de Cinq Cas)

    PubMed Central

    Tourabi, K.; Mejjati, H.; Ribqg, Y.; Achbouk, A.; Arrob, A.; Moussaoui, A.; Ihrai, H.

    2009-01-01

    Summary Pour étudier l'ulcère de Marjolin, tous les dossiers des patients qui se sont présentés pendant une période quinquennale à un Service de Chirurgie Plastique et des Brûlés au Maroc ayant un cancer sur cicatrice de brûlure, objectivé par un examen histopathologique, ont été inclus dans une fiche de recueil de données comprenant des paramètres liés à l'identité du malade, à l'inventaire préthérapeutique, au traitement et à l'évolution du cas. Les Auteurs, après avoir présenté les données des cinq patients inclus dans l'étude, considèrent les problèmes posés par les épithéliomas spinocellulaires sur cicatrice de brûlure, qui sont des affections graves et rares. La dégénérescence des cicatrices de brûlures est une évolution dramatique, causée par la négligence. Le traitement préventif par exérèse systématique de toute lésion suspecte doit être fortement souligné puisqu'il garantit la guérison quasi certaine. PMID:21991185

  11. The Proposed Creation of University System in the Province of Ilocos Sur, Philippines

    ERIC Educational Resources Information Center

    Alviento, Severino G.

    2017-01-01

    This study aimed to determine the level of acceptability of the proposed amalgamation of the three Public Higher Education Institutions in Ilocos Sur. It employed the descriptive method of research. The respondents of the study are the 3rd and 4th year AB Political Science and BSE major in Social Science students and the 4th year BEED students of…

  12. Effet de la composition des materiaux composites sur la caracterisation et detection par ondes de Lamb

    NASA Astrophysics Data System (ADS)

    Ostiguy, Pierre-Claude

    Les matériaux composites sont de plus en plus utilisés en aéronautique. Leurs excellentes propriétés mécaniques et leur faible poids leur procurent un avantage certain par rapport aux matériaux métalliques. Ceux-ci étant soumis à diverses conditions de chargement et environnementales, ils sont suceptibles de subir plusieurs types d'endommagements, compromettant leur intégrité. Des méthodes fiables d'inspection sont donc nécessaires pour évaluer leur intégrité. Néanmoins, peu d'approches non destructives, embarquées et efficaces sont présentement utilisées. Ce travail de recherche se penche sur l'étude de l'effet de la composition des matériaux composites sur la détection et la caractérisation par ondes guidées. L'objectif du projet est de développer une approche de caractérisation mécanique embarquée permettant d'améliorer la performance d'une approche d'imagerie par antenne piézoélectriques sur des structures composite et métalliques. La contribution de ce projet est de proposer une approche embarquée de caractérisation mécanique par ultrasons qui ne requiert pas une mesure sur une multitude d'échantillons et qui est non destructive. Ce mémoire par articles est divisé en quatre parties, dont les parties deux A quatre présentant les articles publiés et soumis. La première partie présente l'état des connaissances dans la matière nécessaires à l'acomplissement de ce projet de maîtrise. Les principaux sujets traités portent sur les matériaux composites, propagation d'ondes, la modélisation des ondes guidées, la caractérisation par ondes guidées et la surveillance embarquée des structures. La deuxième partie présente une étude de l'effet des propriétés mécaniques sur la performance de l'algorithme d'imagerie Excitelet. L'étude est faite sur une structure isotrope. Les résultats ont démontré que l'algorithme est sensible à l'exactitude des propriétés mécaniques utilisées dans le modèle. Cette

  13. Effet de la teneur en carbone sur la resistance du CA6NM a la propagation des fissures de fatigue

    NASA Astrophysics Data System (ADS)

    Akhiate, Aziz

    L'amelioration des performances des roues de turbines hydrauliques a fait l'objet de plusieurs etudes. Dans ce memoire, on s'est interesse a l'effet de la teneur en carbone du materiau de base de type CA6NM des aubes de turbines sur la microstructure et les proprietes mecaniques en general et en particulier sur le comportement en fatigue propagation. De maniere a bien atteindre cet objectif, on a choisi trois differentes nuances d'acier a faible 0.018% C, moyenne 0.033% C et elevee 0.067% C teneurs en carbone. Le 0.018% C et 0.067% C ont ete fabriques par le meme facturier et ils ont subi des traitements thermiques differents. De meme, le 0.033% C a subi des traitements thermiques differents des deux autres apres avoir ete coule par un autre fabricant. Afin d'effacer l'historique des traitements thermiques prealablement effectues et d'avoir la meme taille de grains parents austenitiques (GPA), on a austenitise les trois nuances d'acier a la meme temperature 1040°C, a differentes periodes suivant la teneur en carbone. Apres avoir homogeneise la GPA, on a entame le revenu. Le carbone a une influence sur la microstructure revenue notamment la quantite d'austenite de reversion ainsi que sur sa stabilite thermique et mecanique. Pour mettre en evidence l'effet de la teneur en carbone, on a trouve raisonnable d'isoler les effets relies a la temperature de revenu, en particulier la formation d'austenite de reversion. En effet, on a choisi deux temperatures de revenu. La premiere temperature est a 550°C pendant 2h imposee aux trois materiaux afin d'avoir une microstructure sans austenite de reversion. La deuxieme temperature choisie est a 610°C pour avoir un maximum et une identique quantite d'austenite de reversion sans presence de martensite fraiche. A la lumiere de ces deux microstructures, nous pouvons etablir une relation entre les proprietes mecaniques du CA6NM et la teneur en carbone, ainsi qu'entre les effets de la presence ou non d'austenite de reversion sur les

  14. Earthquakes as collapse precursors at the Han-sur-Lesse Cave in the Belgian Ardennes

    NASA Astrophysics Data System (ADS)

    Camelbeeck, Thierry; Quinif, Yves; Verheyden, Sophie; Vanneste, Kris; Knuts, Elisabeth

    2018-05-01

    Collapse activation is an ongoing process in the evolution of karstic networks related to the weakening of cave vaults. Because collapses are infrequent, few have been directly observed, making it challenging to evaluate the role of external processes in their initiation and triggering. Here, we study the two most recent collapses in the Dôme chamber of the Han-sur-Lesse Cave (Belgian Ardenne) that occurred on or shortly after 3rd December 1828 and between the 13th and 14th of March 1984. Because of the low probability that the two earthquakes that generated the strongest ground motions in Han-sur-Lesse since 1800, on 23rd February 1828 (Mw = 5.1 in Central Belgium) and 8th November 1983 (Mw = 4.8 in Liège) occurred by coincidence less than one year before these collapses, we suggest that the collapses are related to these earthquakes. We argue that the earthquakes accelerated the cave vault instability, leading to the collapses by the action of other factors weakening the host rock. In particular, the 1828 collapse was likely triggered by a smaller Mw = 4.2 nearby earthquake. The 1984 collapse followed two months of heavy rainfall that would have increased water infiltration and pressure in the rock mass favoring destabilization of the cave ceiling. Lamina counting of a stalagmite growing on the 1828 debris dates the collapse at 1826 ± 9 CE, demonstrating the possibility of dating previous collapses with a few years of uncertainty. Furthermore, our study opens new perspectives for studying collapses and their chronology both in the Han-sur-Lesse Cave and in other karstic networks. We suggest that earthquake activity could play a stronger role than previously thought in initiating cave collapses.

  15. Rapport signal-sur-bruit et bande passante : mise au point

    NASA Astrophysics Data System (ADS)

    Jehenson, P.

    1998-02-01

    A widely diffused misconception is that reducing receiver filter bandwidth (BW) reduces noise levels in spectra and thus improves the signal-to-noise (SNR) ratio. We here try to simply explain why this is wrong in spectra (only true in the time domain). Reducing BW, which still is widely used, rather has disadvantages (for distorsions, noise, phasing...) and over-sampling often is convenient. The only, presently usually small, advantage is saving data storage space. Ways to improve spectral SNR rather are to increase the signal per unit BW, by reducing its bandwidth (influenced by T2 and shim) or to decrease noise per unit BW by reducing the various losses or temperature. Une idée fausse très répandue est que réduire la bande passante (BW) du récepteur réduit le bruit et améliore donc le rapport signal-sur-bruit (S/B) du spectre. Nous essayons d'expliquer simplement ici que c'est inexact pour le spectre (vrai seulement dans le domaine temporel). Réduire BW au plus serré, ce qui est encore très largement pratiqué, comporte plutôt des inconvénients (distorsions, bruit, phasage...) et il y a souvent intérêt, pour cela et d'autres raisons, à sur-échantillonner. Le seul avantage, actuellement souvent faible, est d'épargner de la place de stockage des données. Ce sont d'autres paramètres qui permettent d'améliorer le S/B.

  16. Fiabilité des structures mécaniques adaptatives: effet de la panne des actionneurs ou des capteurs sur la stabilité

    NASA Astrophysics Data System (ADS)

    Fall, H.; Charon, W.; Kouta, R.

    2002-12-01

    Ces dernières décennies, des activités significatives dans le monde étaient dirigées autour du contrôle actif. Le but de ces recherches était essentiellement d'améliorer les performances, la fiabilité et la sécurité des systèmes. Notamment dans le cas des structures soumises à des vibrations aléatoires. D'importants travaux ont été consacré à l'utilisation des “matériaux intelligents” comme capteurs et actionneurs. Cette article propose l'analyse de la fiabilité des systèmes mécaniques en étudiant les pannes des actionneurs ou des capteurs. L'effet de ces pannes sur la stabilité et la performance du système y est démontré. Les méthodologies de conception y sont rappelées. Des exemples numériques sont fournis à travers le contrôle d'un panneau sous chargement dynamique pour illustrer la méthode proposée.

  17. A Bottom Gravity Survey of the Continental Shelf Between Point Lobos and Point Sur, California.

    DTIC Science & Technology

    From an occupation of 68 ocean bottom and 38 land gravity stations between Pt. Lobos and Pt. Sur, California, a complete Bouguer anomaly map was...produced and analyzed. The steps in data reduction leading to the complete Bouguer anomaly field are presented, unique features of which are associated

  18. The Classroom as Big Sur: Notes on the Liaison Between Evaluation and Professional Growth

    ERIC Educational Resources Information Center

    Sneeden, Ralph

    2013-01-01

    Bill Frisell's new album ("Big Sur") was heralded with a short documentary about its impulse and inception: Frisell's retreat to an isolated coastal ranch in Central California. In the video, he describes the influence of the place, the dramatic and evocative landscape, and how it ultimately became the subject and theme for the…

  19. A new species of Rhadinella (Serpentes: Colubridae) from the Sierra Madre del Sur of Guerrero, Mexico.

    PubMed

    Campillo, Gustavo; Dávila-Galavíz, Luis Fernando; Flores-Villela, Oscar; Campbell, Jonathan A

    2016-04-12

    We describe a new species of Rhadinella from the Sierra Madre del Sur of Guerrero, Mexico, a region where the genus was previously unknown. This diminutive species is a member of a group of snakes previously allocated in the Rhadinaea godmani group, and more recently transferred to the genus Rhadinella. These snakes may have conspicuous dark longitudinal striping on a pale brown to orange background or may have dark brown to blackish dorsal ground coloration, which mostly or completely obfuscates a pattern of longitudinal striping. The new species is mostly dark with barely discernible slightly paler or darker striping (depending on how striping is interpreted). The closest relative of the new species, on the basis of morphological similarities and biogeography, appears to be Rhadinella donaji which occurs to the east in the Sierra Madre del Sur of Oaxaca about 275 km from the type-locality of the new species.

  20. The deviations of the Al6Li3Cu quasicrystal from icosahedral symmetry : a reminiscence of a cubic crystal

    NASA Astrophysics Data System (ADS)

    Donnadieu, Patricia

    1994-05-01

    The (Al6Li3Cu) (T2) quasicrystals are known to exhibit large deviations from the icosahedral symmetry. Series of electron diffraction patterns are used to investigate these imperfections in as-cast T, samples. A detailed analysis of the 5-fold and 3-fold symmetry diffraction patterns shows that they are compatible with the m3 point group instead of the m35 icosahedral group. This symmetry reduction is interprétéd as reminiscent of the cubic approximant phase (R-Al5Li3Cu) rather than of higher order approximant phases. This interpretation is supported by previous observations on crystal/quasicrystal phase transformation in the AlLiCu system. Les quasicristaux de phase T2(Al6Li3Cu) montrent d'importantes déviations à la symétrie icosaédrique. Ces imperfections sont mises en évidence par diffraction électronique dans des échantillons de phase T2 brut de coulée. Un examen détaillé des diagrammes de diffraction de symétrie d'ordre 3 et 5 révèle qu'ils sont compatibles avec le groupe ponctuel m3 au lieu du groupe de l'icosaèdre (m35). Cette réduction de symétrie est interprétée comme une réminiscence de la phase cubique approximante (R-Al5Li3Cu) et non l'apparition d'approximant d'ordre plus élevé. Cette interprétation est suggérée par des observations antérieures sur la transformation cristal/quasicristal dans le système AlLiCu.

  1. Piégeage cohérent de population sur des atomes froids

    NASA Astrophysics Data System (ADS)

    Zanon, T.; Guérandel, S.; de Clercq, E.; Holleville, D.; Dimarcq, N.; Clairon, A.

    2004-11-01

    Dans le cadre de futures horloges atomiques compactes destinées à la navigation spatiale, il est possible de remplacer l'interrogation micro-onde d'une horloge atomique classique par une interrogation optique à l'aide de faisceaux Raman et d'asservir un oscillateur à quartz sur la réponse atomique crée par le phénomène de piégeage cohérent de population (CPT en anglais pour Coherent Population Trapping).

  2. Effets potentiels d’un modèle rationnel de prescription sur les dépenses nationales en santé

    PubMed Central

    Littman, Jordan; Halil, Roland

    2016-01-01

    Résumé Objectif Estimer les économies que pourrait engendrer la mise en œuvre d’un modèle rationnel de prescription pour des classes de médicaments équivalents sur les plans de l’efficacité, de la toxicité et de la commodité. Conception L’Institut canadien d’information sur la santé a fourni des renseignements sur les 10 principales classes de médicaments en fonction des dépenses annuelles qui leur sont attribuables. Ces classes ont été examinées en vue de leur inclusion potentielle dans l’étude selon qu’il était possible de comparer les médicaments à l’intérieur d’une même classe. Lorsqu’à la suite d’une recherche documentaire, une équivalence a été établie en fonction de l’efficacité, de la toxicité et de la commodité des médicaments, les données annuelles sur les prescriptions ont été recueillies à partir de la base de données du Système national d’information sur l’utilisation des médicaments prescrits. Les économies potentielles de coûts ont ensuite été calculées en comparant les parts de marché actuelles avec les parts potentielles futures de ce marché. Contexte Le Canada. Principaux paramètres à l’étude Les différences estimées dans les dépenses que produirait un modèle rationnel de prescription. Résultats Une équivalence a été établie sur les plans de l’efficacité, de la toxicité et de la commodité dans les classes de statines, d’inhibiteurs de la pompe à protons, d’inhibiteurs de l’enzyme de conversion de l’angiotensine et d’inhibiteurs sélectifs du recaptage de l’angiotensine. Les dépenses annuelles totales dans ces classes se situent à 856 millions $ dans les programmes publics de médicaments et à 1,97 milliard $ environ à l’échelle nationale. Grâce à des prescriptions rationnelles, on estime que les économies annuelles pourraient atteindre 222 millions $ pour les programmes publics et 521 millions $ à l’échelle nationale. Conclusion La

  3. L’opinion des étudiants en médecine de Québec sur les punitions corporelles

    PubMed Central

    Labbé, Jean; Laflamme, Nathalie; Makosso-Kallyth, Sun

    2012-01-01

    OBJECTIF : L’objectif de la présente étude est de décrire l’opinion des étudiants en médecine de l’Université Laval sur le sujet controversé des punitions corporelles envers les enfants. MÉTHODOLOGIE : Un sondage a été réalisé auprès des étudiants en quatrième année de médecine de l’Université Laval pendant cinq années consécutives, soit de l’année scolaire 2006–2007 jusqu’à celle de 2010–2011 inclusivement, à l’occasion d’un séminaire portant sur la maltraitance envers les enfants. RÉSULTATS : Sur les 712 étudiants interrogés, 74 % étaient de sexe féminin et 91 % étaient âgés de moins de 30 ans. Concernant les punitions corporelles envers les enfants, 22 % des répondants s’y sont déclarés favorables. Plus de garçons que de filles se sont prononcés en faveur de cette pratique disciplinaire, soit 31 % des garçons par rapport à 18 % des filles respectivement (RC rajusté = 2,2, IC 95 % :1,4 à 3,4; p=0,0003). Près de 36 % des étudiants ayant eu des punitions corporelles y étaient favorables, comparativement à seulement 4 % de ceux qui n’avaient pas connu cette forme de discipline (RC rajusté = 16,5, IC 95 % :8,6 à 31,4; p<0,0001). Parmi ceux qui ont mentionné avoir été victimes d’abus physique, 25 % se sont déclarés en faveur de cette pratique, ce qui est similaire au 21 % observés chez ceux qui n’en ont pas été victimes (p=0,52). CONCLUSION : Alors que plusieurs organismes médicaux se sont prononcés contre l’utilisation des punitions corporelles, plus d’un futur médecin sur cinq à Québec se déclare favorable à cette méthode disciplinaire et pourrait influencer la conduite des parents en ce sens. PMID:24179417

  4. Minimisation de l'influence de la témperature sur un capteur polarimétrique de position angulaire

    NASA Astrophysics Data System (ADS)

    Gaumont, Eric; Chakari, Ayoub; Clement, Michel; Meyrueis, Patrick

    2018-04-01

    This paper, "Minimisation de l'influence de la témperature sur un capteur polarimétrique de position angulaire," was presented as part of International Conference on Space Optics—ICSO 1997, held in Toulouse, France.

  5. Enquête internationale sur l'état de l'art et l'état de la pratique en géotechnique

    NASA Astrophysics Data System (ADS)

    Acosta-Martinez, Hugo; Delage, Pierre; Nicks, Jennifer; Day, Peter

    2018-05-01

    Cet article présente une synthèse des résultats de l'enquête internationale sur l'état de l'art et l'état de la pratique en ingénierie géotechnique lancée par le Groupe présidentiel des entreprises associées et le Comité de supervision technique de la Société internationale de mécanique des sols et de géotechnique en mars 2017. Il résume également les discussions qui ont eu lieu sur le sujet durant le 19e CIMSG à Séoul, le 20 septembre 2017.

  6. Issue des accouchements sur utérus cicatriciel dans un hôpital universitaire au Burkina

    PubMed Central

    Dembélé, Adama; Tarnagda, Zekiba; Ouédraogo, Jean Louis; Thiombiano, Oumarou; Bambara, Moussa

    2012-01-01

    Certains auteurs ont tendance à privilégier la césarienne comme méthode de prise en charge d'une parturiente porteuse d'un utérus cicatriciel. D'autres auteurs préconisent un accouchement par voie basse quand des paramètres cliniques précis sont observés. Le but de cette étude est d'analyser la prise en charge et l'issue des accouchements sur utérus cicatriciel au Centre Hospitalier Universitaire Souro Sanou de Bobo-Dioulasso et de la comparer aux différentes approches recommandées. Nous avons menés une étude transversale dans le Département de Gynécologie d'Obstétrique et de Médecine de la Reproduction du Centre Hospitalier Universitaire Sanou Souro de Bobo Dioulasso du 1er août 2006 au 1er août 2007 et a concerné 252 parturientes ayant un utérus cicatriciel parmi 4256 accouchements déroulés pendant la même période. Les accouchements sur utérus cicatriciels ont représenté 5,92 % de l'ensemble des accouchements dans notre département. La moyenne d'âge des patientes était de 26,2 ans et la parité moyenne de 4,3. Une césarienne d'emblée a été pratiquée chez 44% des parturientes ayant un utérus cicatriciel et 56 % parmi elles ont fait l'objet d'une épreuve utérine. Sur l'ensemble des épreuves utérines, 61% des parturientes ont accouché par voie basse. La mortalité maternelle était nulle et La mortalité périnatale était relativement importante. Les conditions d'acceptabilité de la voie basse ont été les mêmes chez toutes les patientes et un check liste a été proposé pour une meilleure prise en charge. L'épreuve utérine en salle d'accouchement doit être la règle à chaque fois que cela est possible chez une parturiente porteuse d'utérus cicatriciel. L’établissement d'un check liste pour accouchement par voie basse sur utérus cicatriciel facilite les prises de décision. PMID:23133695

  7. Recommandations sur l’examen pelvien de dépistage systématique

    PubMed Central

    Tonelli, Marcello; Gorber, Sarah Connor; Moore, Ainsley; Thombs, Brett D.

    2016-01-01

    Résumé Objectif Examiner les lignes directrices de 2014 de l’American College of Physicians (ACP) en matière d’examens pelviens de dépistage du cancer (autre que du col), des maladies inflammatoires pelviennes ou d’autres affections gynécologiques bénignes afin de déterminer si les lignes directrices de l’ACP en matière d’examens pelviens systématiques sont conformes aux normes établies par le Groupe d’étude canadien sur les soins de santé préventifs (GECSSP) et peuvent être adaptées ou adoptées. Méthodologie La méthode SNAP-IT (Smooth National Adaptation and Presentation of Guidelines to Improve Thrombosis Treatment) a servi à déterminer si les lignes directrices de l’ACP étaient conformes aux normes du GECSSP et pouvaient être adaptées ou adoptées. Recommandations Le GECSSP recommande de ne pas effectuer un examen pelvien de dépistage des cancers non cervicaux, des maladies inflammatoires pelviennes ou d’autres affections gynécologiques chez les femmes asymptomatiques. Il s’agit d’une forte recommandation reposant sur des données probantes de qualité modérée. Conclusion Le GECSSP adopte la recommandation en matière d’examen pelvien de dépistage, comme publiée par l’ACP en 2014.

  8. Yarn supplier selection using analytical hierarchy process (AHP) and standardized unitless rating (SUR) method on textile industry

    NASA Astrophysics Data System (ADS)

    Erfaisalsyah, M. H.; Mansur, A.; Khasanah, A. U.

    2017-11-01

    For a company which engaged in the textile field, specify the supplier of raw materials for production is one important part of supply chain management which can affect the company's business processes. This study aims to identify the best suppliers of raw material suppliers of yarn for PC. PKBI based on several criteria. In this study, the integration between the Analytical Hierarchy Process (AHP) and the Standardized Unitless Rating (SUR) are used to assess the performance of the suppliers. By using AHP, it can be known the value of the relative weighting of each criterion. While SUR shows the sequence performance value of the supplier. The result of supplier ranking calculation can be used to know the strengths and weaknesses of each supplier based on its performance criteria. From the final result, it can be known which suppliers should improve their performance in order to create long term cooperation with the company.

  9. Methodologie de conception numerique d'un ventilateur helico-centrifuge basee sur l'emploi du calcul meridien

    NASA Astrophysics Data System (ADS)

    Lallier-Daniels, Dominic

    La conception de ventilateurs est souvent basée sur une méthodologie « essais/erreurs » d'amélioration de géométries existantes ainsi que sur l'expérience de design et les résultats expérimentaux cumulés par les entreprises. Cependant, cette méthodologie peut se révéler coûteuse en cas d'échec; même en cas de succès, des améliorations significatives en performance sont souvent difficiles, voire impossibles à obtenir. Le projet présent propose le développement et la validation d'une méthodologie de conception basée sur l'emploi du calcul méridien pour la conception préliminaire de turbomachines hélico-centrifuges (ou flux-mixte) et l'utilisation du calcul numérique d'écoulement fluides (CFD) pour la conception détaillée. La méthode de calcul méridien à la base du processus de conception proposé est d'abord présentée. Dans un premier temps, le cadre théorique est développé. Le calcul méridien demeurant fondamentalement un processus itératif, le processus de calcul est également présenté, incluant les méthodes numériques de calcul employée pour la résolution des équations fondamentales. Une validation du code méridien écrit dans le cadre du projet de maîtrise face à un algorithme de calcul méridien développé par l'auteur de la méthode ainsi qu'à des résultats de simulation numérique sur un code commercial est également réalisée. La méthodologie de conception de turbomachines développée dans le cadre de l'étude est ensuite présentée sous la forme d'une étude de cas pour un ventilateur hélico-centrifuge basé sur des spécifications fournies par le partenaire industriel Venmar. La méthodologie se divise en trois étapes: le calcul méridien est employé pour le pré-dimensionnement, suivi de simulations 2D de grilles d'aubes pour la conception détaillée des pales et finalement d'une analyse numérique 3D pour la validation et l'optimisation fine de la géométrie. Les résultats de calcul m

  10. Some cannabinoid receptor ligands and their distomers are direct-acting openers of SUR1 KATP channels

    PubMed Central

    Zhou, Qing; Shyng, Show-Ling; Heal, David J.; Cheetham, Sharon C.; Dickinson, Keith; Gregory, Peter; Firnges, Michael; Nordheim, Ulrich; Goshorn, Stephanie; Reiche, Dania; Turski, Lechoslaw; Antel, Jochen

    2012-01-01

    Here, we examined the chronic effects of two cannabinoid receptor-1 (CB1) inverse agonists, rimonabant and ibipinabant, in hyperinsulinemic Zucker rats to determine their chronic effects on insulinemia. Rimonabant and ibipinabant (10 mg·kg−1·day−1) elicited body weight-independent improvements in insulinemia and glycemia during 10 wk of chronic treatment. To elucidate the mechanism of insulin lowering, acute in vivo and in vitro studies were then performed. Surprisingly, chronic treatment was not required for insulin lowering. In acute in vivo and in vitro studies, the CB1 inverse agonists exhibited acute K channel opener (KCO; e.g., diazoxide and NN414)-like effects on glucose tolerance and glucose-stimulated insulin secretion (GSIS) with approximately fivefold better potency than diazoxide. Followup studies implied that these effects were inconsistent with a CB1-mediated mechanism. Thus effects of several CB1 agonists, inverse agonists, and distomers during GTTs or GSIS studies using perifused rat islets were unpredictable from their known CB1 activities. In vivo rimonabant and ibipinabant caused glucose intolerance in CB1 but not SUR1-KO mice. Electrophysiological studies indicated that, compared with diazoxide, 3 μM rimonabant and ibipinabant are partial agonists for K channel opening. Partial agonism was consistent with data from radioligand binding assays designed to detect SUR1 KATP KCOs where rimonabant and ibipinabant allosterically regulated 3H-glibenclamide-specific binding in the presence of MgATP, as did diazoxide and NN414. Our findings indicate that some CB1 ligands may directly bind and allosterically regulate Kir6.2/SUR1 KATP channels like other KCOs. This mechanism appears to be compatible with and may contribute to their acute and chronic effects on GSIS and insulinemia. PMID:22167524

  11. Synthesizing (ZrAl3 + AlN)/Mg-Al composites by a 'matrix exchange' method

    NASA Astrophysics Data System (ADS)

    Gao, Tong; Li, Zengqiang; Hu, Kaiqi; Han, Mengxia; Liu, Xiangfa

    2018-06-01

    A method named 'matrix exchange' to synthesize ZrAl3 and AlN reinforced Mg-Al composite was developed in this paper. By inserting Al-10ZrN master alloy into Mg matrix and reheating the cooled ingot to 550 °C, Al and Mg atoms diffuse to the opposite side. As a result, liquid melt occurs once the interface areas reach to proper compositions. Then dissolved Al atoms react with ZrN, leading to the in-situ formation of ZrAl3 and AlN particles, while the Al matrix is finally replaced by Mg. This study provides a new insight for preparing Mg composites.

  12. Technical Evaluation Report on the Fluid Dynamics Panel Specialists’ Meeting on Effects of Adverse Weather on Aerodynamics (Les Effets des Conditions Meteorologiques Adverses sur l’Aerodynamique)

    DTIC Science & Technology

    1991-11-01

    AD-A245 117 III~i~IIiiIiIIi~ifhII _________________________AGARD-R306 0 AGARD ADVISORY GROUP FOR AEROSPACE RESEARCH & DEVELOPMENT 4 7 RUE ANCELLE...REPRODUCE LEGIBLY. AGARD-AR-306 ADVISORY GROUP FOR AEROSPACE RESEARCH & DEVELOPMENT 7 RUE ANCELLE 92200 NEUILLY SUR SEINE FRANCE AGARD ADVISORY RIEPORT...Conditions NMeleorolovioiue,, Adverscs sur rAerodynarminiuc) - J.J. Reinrnann National ,\\cronautico and Space .\\drmintration L eip Research (Center

  13. First record of a louse fly, Stilbometopa impressa (Bigot), and new host for Microlynchia pusilla (Speiser) (Hippoboscidae) from the Cape Region, Baja California Sur, México.

    PubMed

    Llinas, J; Jiménez, M L

    1996-04-01

    Nine of thirty California quail (Callipepla californica achrustera) captured in autumn of 1992, 17 km west of La Paz, Baja California Sur, México, were parasitized by louse flies. We identified eight Microlynchia pusilla and three Stilbometopa impressa from 30 quails in the ratio of 2.75:1. These are the first records of S. impressa for Cape Region and the first time either fly has been reported from the California quail in Baja California Sur.

  14. Influence du traitement ionisant par rayonnement γ sur le pouvoir antioxydant de fractions polyphénoliques issues de substances d'origine végétale

    NASA Astrophysics Data System (ADS)

    Stuyck, S.; Connaulte, J.; Lesgards, G.; Prost, M.; Raffi, J.

    1998-04-01

    Ionizing radiation of vegetables is a cleaning up and preservation physical treatment which consists in submitting them to γ radiation, X radiation or electrons beam. This study deals with the influence of γ radiation on antioxidative effect of vegetables polyphenolic parts. In that purpose, we use a simple biological test based on erythrocytes haemolysis. Le traitement ionisant des produits végétaux est un procédé physique d'assainissement et de conservation qui consiste à les soumettre à l'action de rayonnements γ, de rayons X ou de faisceaux d'électrons. Ce travail porte sur l'étude de l'influence des rayonnements γ sur le pouvoir antioxydant de fractions polyphénoliques issues de substances d'origine végétale. Pour cela, un test biologique basé sur l'hémolyse d'érythrocytes est utilisé.

  15. Le premier examen gynécologique idéal imaginé par les jeunes filles

    PubMed Central

    Freyens, Anne; Dejeanne, Mélanie; Fabre, Elise; Rouge-Bugat, Marie-Eve; Oustric, Stéphane

    2017-01-01

    Résumé Objectif Explorer les représentations sur l’examen gynécologique (EG) et identifier les critères nécessaires à son bon déroulement chez des adolescentes n’ayant pas encore vécu cet examen. Type d’étude Enquête qualitative par entrevues semi-dirigées. Contexte Midi-Pyrénées (France) et Auvergne (France). Participants Jeunes filles de 15 à 19 ans qui n’ayant pas vécu l’EG. Méthodes Le mode de recrutement de l’échantillon a été double : sélection des jeunes filles par la technique boule-de-neige et sélection par la technique d’échantillonnage ciblé jusqu’à l’obtention de la saturation des données tout en cherchant la variation maximale dans les profils des sujets. Les questions ouvertes portaient sur les sources d’informations, les connaissances, les critères de bon déroulement et l’imaginaire autour de l’EG. Le verbatim a fait l’objet d’une analyse longitudinale immédiate rassemblant le contexte (notes des chercheurs) et les idées principales de l’entretien. Une analyse transversale thématique a été réalisée. Principales constatations Une méconnaissance générale des jeunes filles sur l’EG entretenait l’imaginaire autour de cet examen perçu comme obligatoire. L’EG idéal, selon les jeunes filles interrogées, aurait lieu chez une jeune fille qui se sentirait prête, informée préalablement, pouvant être accompagnée selon son souhait. Cet examen se déroulerait dans un environnement chaleureux et confortable afin de diminuer le sentiment de vulnérabilité. La qualité du lien avec le médecin conditionnerait l’acceptation de cet examen par les jeunes filles. Conclusion Une consultation dédiée à l’information, préalable à la consultation où a lieu l’EG, permettrait de diminuer les appréhensions, d’améliorer les connaissances des jeunes filles et de favoriser le bon déroulement du futur premier EG tant pour le médecin que pour la patiente. PMID:28807971

  16. [Dépistage précoce des retards du développement moteur: Outil de dépistage axé sur la famille].

    PubMed

    Harris, Susan R

    2016-08-01

    Décrire le test HINT (Harris Infant Neuromotor Test), un test d'évaluation du développement neuromoteur chez les nourrissons publié en 2010, qui s'appuie sur les normes canadiennes et peut être utilisé pour dépister les retards du développement moteur durant la première année de la vie. QUALITÉ DES DONNÉES: D'abondantes recherches ont été publiées sur la fiabilité intra-évaluateur, inter-évaluateur et test-retest ainsi que sur la validité convergente, prédictive, du contenu et des groupes connus du test HINT, de même que sur la sensibilité, la spécificité et les valeurs prédictives négatives et positives des inquiétudes des parents, telles qu'évaluées par le test HINT. La plupart des données probantes sont de niveau II. Il est important de diagnostiquer les retards du développement moteur durant la première année de vie, car ils sont souvent le signe de retards du développement généralisés ou de déficiences précises, telles que la paralysie cérébrale. Les inquiétudes des parents quant au développement moteur de leur enfant sont une valeur prédictive robuste de diagnostics subséquents de retard du développement moteur. Seul le dépistage précoce des retards du développement moteur, initialement par l'entremise d'outils de dépistage comme le test HINT, permet de recommander le patient à une intervention précoce qui profiterait tant à l'enfant qu'à sa famille. Copyright© the College of Family Physicians of Canada.

  17. Efficacy of a new technique - INtubate-RECruit-SURfactant-Extubate - "IN-REC-SUR-E" - in preterm neonates with respiratory distress syndrome: study protocol for a randomized controlled trial.

    PubMed

    Vento, Giovanni; Pastorino, Roberta; Boni, Luca; Cota, Francesco; Carnielli, Virgilio; Cools, Filip; Dani, Carlo; Mosca, Fabio; Pillow, Jane; Polglase, Graeme; Tagliabue, Paolo; van Kaam, Anton H; Ventura, Maria Luisa; Tana, Milena; Tirone, Chiara; Aurilia, Claudia; Lio, Alessandra; Ricci, Cinzia; Gambacorta, Alessandro; Consigli, Chiara; D'Onofrio, Danila; Gizzi, Camilla; Massenzi, Luca; Cardilli, Viviana; Casati, Alessandra; Bottino, Roberto; Pontiggia, Federica; Ciarmoli, Elena; Martinelli, Stefano; Ilardi, Laura; Colnaghi, Mariarosa; Matassa, Piero Giuseppe; Vendettuoli, Valentina; Villani, Paolo; Fusco, Francesca; Gazzolo, Diego; Ricotti, Alberto; Ferrero, Federica; Stasi, Ilaria; Magaldi, Rosario; Maffei, Gianfranco; Presta, Giuseppe; Perniola, Roberto; Messina, Francesco; Montesano, Giovanna; Poggi, Chiara; Giordano, Lucio; Roma, Enza; Grassia, Carolina; Ausanio, Gaetano; Sandri, Fabrizio; Mescoli, Giovanna; Giura, Francesco; Garani, Giampaolo; Solinas, Agostina; Lucente, Maria; Nigro, Gabriella; Del Vecchio, Antonello; Petrillo, Flavia; Orfeo, Luigi; Grappone, Lidia; Quartulli, Lorenzo; Scorrano, Antonio; Messner, Hubert; Staffler, Alex; Gargano, Giancarlo; Balestri, Eleonora; Nobile, Stefano; Cacace, Caterina; Meli, Valerio; Dallaglio, Sara; Pasqua, Betta; Mattia, Loretta; Gitto, Eloisa; Vitaliti, Marcello; Re, Maria Paola; Vedovato, Stefania; Grison, Alessandra; Berardi, Alberto; Torcetta, Francesco; Guidotti, Isotta; di Fabio, Sandra; Maranella, Eugenia; Mondello, Isabella; Visentin, Stefano; Tormena, Francesca

    2016-08-18

    Although beneficial in clinical practice, the INtubate-SURfactant-Extubate (IN-SUR-E) method is not successful in all preterm neonates with respiratory distress syndrome, with a reported failure rate ranging from 19 to 69 %. One of the possible mechanisms responsible for the unsuccessful IN-SUR-E method, requiring subsequent re-intubation and mechanical ventilation, is the inability of the preterm lung to achieve and maintain an "optimal" functional residual capacity. The importance of lung recruitment before surfactant administration has been demonstrated in animal studies showing that recruitment leads to a more homogeneous surfactant distribution within the lungs. Therefore, the aim of this study is to compare the application of a recruitment maneuver using the high-frequency oscillatory ventilation (HFOV) modality just before the surfactant administration followed by rapid extubation (INtubate-RECruit-SURfactant-Extubate: IN-REC-SUR-E) with IN-SUR-E alone in spontaneously breathing preterm infants requiring nasal continuous positive airway pressure (nCPAP) as initial respiratory support and reaching pre-defined CPAP failure criteria. In this study, 206 spontaneously breathing infants born at 24(+0)-27(+6) weeks' gestation and failing nCPAP during the first 24 h of life, will be randomized to receive an HFOV recruitment maneuver (IN-REC-SUR-E) or no recruitment maneuver (IN-SUR-E) just prior to surfactant administration followed by prompt extubation. The primary outcome is the need for mechanical ventilation within the first 3 days of life. Infants in both groups will be considered to have reached the primary outcome when they are not extubated within 30 min after surfactant administration or when they meet the nCPAP failure criteria after extubation. From all available data no definitive evidence exists about a positive effect of recruitment before surfactant instillation, but a rationale exists for testing the following hypothesis: a lung recruitment

  18. ``Astrophysique sur Mesure'', E-learning in Astronomy and Astrophysics

    NASA Astrophysics Data System (ADS)

    Mosser, Benoît; Delsanti, Audrey; Guillaume, Damien; Balança, Christian; Balkowski, Chantal

    2011-06-01

    ``Astrophysique sur Mesure'' (astrophysics made-to-measure) is a set of e-learning programmes started 4 years ago at the Paris Observatory. In order to deliver attractive and efficient programmes, we have added many multimedia tools to usual lectures: animations, Java applets. The programmes are presented on two different platforms. The first one offers the content of all the lectures in free access. A second platform with restricted access is provided to registered students taking part in the e-learning program and benefiting from the help of tutors. The development of these programs helps to increase the sphere of influence of astronomy taught at the Paris Observatory, hence to increase the presence of astronomy in various degree courses. Instead of teaching classical astronomy lectures to a happy few, we can bring astronomy and astrophysics to a wider audience.

  19. Influence des macles sur le courant critique de transport selon c et sur la ligne d'irréversibilité dans les plans ab étudiée dans des échantillons monodomaines texturés d'YBaCuO

    NASA Astrophysics Data System (ADS)

    Sanfilippo, S.; Sulpice, A.; Bourgault, D.; Villard, C.; Gautier-Picard, P.; Chaud, X.; Beaugnon, E.; Tournier, R.

    1998-02-01

    Direct transport measurements at 77 K of the critical current density along the c-axis (J_c) and magnetic measurements are performed on the same bulk textured single domain YBaCuO samples with the longest dimension along the c-axis. A strong influence of the Twin Planes (TP) on J_c and on the ab-plane irreversibility line B(T^*) is reported when the field is rotated in the ab-planes perpendicularly to the c-axis. The different unusual behaviors observed for J_c and the B(T^*), depending on the range of temperature and field are explained by the strong influence of these extended correlated defects on the pinning of the flux lines. La densité de courant critique selon l'axe c (J_c) est mesurée à 77 K en transport et par des mesures magnétiques sur les mêmes échantillons texturés monodomaines d'YBaCuO. L'influence des plans de macles (TP) sur J_c et sur la ligne d'irréversibilité B(T^*) est étudiée en faisant tourner le champ dans les plans ab, perpendiculairement à l'axe c. Les résultats montrent que dans ces composés, J_c et B(T^*) sont fortement influencés par le piégeage par les TP. Divers comportements des lignes de flux résultant de l'influence de ces défauts corrélés sont proposés selon les gammes de température et de champ étudiées.

  20. The Deer Creek Site, Oklahoma: A Wichita Village Sometimes Called Ferdinandina: An Ethnohistorian’s View. Series in Anthropology Number 5

    DTIC Science & Technology

    1981-01-01

    pour le Roi au dit pays et Sur les the Kansas Gateway to the American West, decouvertes et recherches de M. Be’nard de La 1540-1854. Topeka: Kansas...1831 Journal Historique de l’Establissement [1746-471 "Memoires sur la Louisiane," desFrantwii.a la Louisiane. Ed. A.-L. Boimare, BN, Joly de Fleur...Guillaume Boeckmann-Jones Company. 1700 Map titled: L’Am~rique//Septen- trionale//Dressee sur les Observations de Mrs. Cavelier de La Salle, Robert de

  1. Magnetism of Al-substituted magnetite reduced from Al-hematite

    NASA Astrophysics Data System (ADS)

    Jiang, Zhaoxia; Liu, Qingsong; Zhao, Xiang; Roberts, Andrew P.; Heslop, David; Barrón, Vidal; Torrent, José

    2016-06-01

    Aluminum-substituted magnetite (Al-magnetite) reduced from Al-substituted hematite or goethite (Al-hematite or Al-goethite) is an environmentally important constituent of magnetically enhanced soils. In order to characterize the magnetic properties of Al-magnetite, two series of Al-magnetite samples were synthesized through reduction of Al-hematite by a mixed gas (80% CO2 and 20% CO) at 395°C for 72 h in a quartz tube furnace. Al-magnetite samples inherited the morphology of their parent Al-hematite samples, but only those transformed from Al-hematite synthesized at low temperature possessed surficial micropores, which originated from the release of structural water during heating. Surface micropores could thus serve as a practical fingerprint of fire or other high-temperature mineralogical alteration processes in natural environments, e.g., shear friction in seismic zones. In addition, Al substitution greatly affects the magnetic properties of Al-magnetite. For example, coercivity (Bc) increases with increasing Al content and then decreases slightly, while the saturation magnetization (Ms), Curie temperature (Tc), and Verwey transition temperature (Tv) all decrease with increasing Al content due to crystal defect formation and dilution of magnetic ions caused by Al incorporation. Moreover, different trends in the correlation between Tc and Bc can be used to discriminate titanomagnetite from Al-magnetite, which is likely to be important in environmental and paleomagnetic studies, particularly in soil.

  2. Impacts de l`élévation du niveau de la mer sur l'évolution future d'une côte basse à lagune de la péninsule du Cap Bon (Nord-Est de la Tunisie): approche cartographique

    NASA Astrophysics Data System (ADS)

    Brahmi, Noura; Dhieb, Mohsen; Chedly Rabia, Mohamed

    2018-05-01

    La submersion marine est l'une des principales menaces qui pèsent sur les zones humides littorales de la péninsule du Cap Bon. Or, cette menace est amenée à se renforcer en raison du réchauffement climatique qui entraînera une élévation du niveau marin et vraisemblablement un renforcement de l'intensité des tempêtes et des cyclones tropicaux d'ici à l'horizon 2100. L'objectif a donc été d'évaluer la vulnérabilité de la lagune face à la submersion. Dans cette optique, après avoir identifié les enjeux liés à l'élévation du niveau de la mer pour la lagune, nous avons dressé une cartographie prévisionnelle des risques de submersion par l'intermédiaire d'une application cartographique basée sur une modélisation numérique de terrain et analysé les impacts potentiels de ce phénomène. La cartographie est donc amenée à devenir centrale pour l'étude de l'impact du risque de la submersion marine sur les lagunes côtières et la gestion de ces espaces dans les décennies à venir. La cartographie de l'aléa submersion marine a montré que l'ouverture épisodique de brèches lors des tempêtes pourrait entraîner la submersion de l'ensemble du domaine lagunaire et aurait un impact morphogénique essentiel. En effet, le phénomène d'une accélération de l'élévation du niveau marin et d'un renforcement des tempêtes génère le morcellement du cordon littoral qui sépare la lagune de la mer. Par ailleurs, les pertes de matériel sédimentaire pour la plage augmenteront, dans la mesure où, lors d'une tempête, une grande partie des matériaux déplacés par les vagues dans les étangs par submersion ou par ouverture d'une brèche, ne peut être récupérée par la suite. Tout ceci constitue un facteur d'accélération du recul ou de disparition de la plage déjà très érodée. Les impacts de cette submersion pourraient être importants en absence de mesures préventives. Elle aurait ainsi des répercussions profondes sur les syst

  3. Familial ALS

    PubMed Central

    Boylan, Kevin

    2015-01-01

    Synopsis Genes linked to ALS susceptibility are being identified at an increasing rate owing to advances in molecular genetic technology. Genetic mechanisms in ALS pathogenesis appear to exert major effects in ~10% of patients, but genetic factors at some level may be important components of disease risk in most ALS patients. Identification of gene variants associated with ALS has informed concepts of the pathogenesis of ALS, aided the identification of therapeutic targets, facilitated research to develop new ALS biomarkers, and supported the establishment of clinical diagnostic tests for ALS-linked genes. Translation of this knowledge to ALS therapy development is ongoing. PMID:26515623

  4. Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

    DOE PAGES

    Yadav, S. K.; Wang, J.; Liu, X. -Y.

    2016-06-13

    An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. Furthermore, the formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamicallymore » driven process.« less

  5. Interfacial characterization of Al-Al thermocompression bonds

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Malik, N., E-mail: nishantmalik1987@gmail.com; SINTEF ICT, Department of Microsystems and Nanotechnology, P.O. Box 124 Blindern, N-0314 Oslo; Carvalho, P. A.

    2016-05-28

    Interfaces formed by Al-Al thermocompression bonding were studied by the transmission electron microscopy. Si wafer pairs having patterned bonding frames were bonded using Al films deposited on Si or SiO{sub 2} as intermediate bonding media. A bond force of 36 or 60 kN at bonding temperatures ranging from 400–550 °C was applied for a duration of 60 min. Differences in the bonded interfaces of 200 μm wide sealing frames were investigated. It was observed that the interface had voids for bonding with 36 kN at 400 °C for Al deposited both on Si and on SiO{sub 2}. However, the dicing yield was 33% for Al onmore » Si and 98% for Al on SiO{sub 2}, attesting for the higher quality of the latter bonds. Both a bond force of 60 kN applied at 400 °C and a bond force of 36 kN applied at 550 °C resulted in completely bonded frames with dicing yields of, respectively, 100% and 96%. A high density of long dislocations in the Al grains was observed for the 60 kN case, while the higher temperature resulted in grain boundary rotation away from the original Al-Al interface towards more stable configurations. Possible bonding mechanisms and reasons for the large difference in bonding quality of the Al films deposited on Si or SiO{sub 2} are discussed.« less

  6. Technique distribuee de gestion de la charge sur le reseau electrique et ring-tree: Un nouveau systeme de communication P2P

    NASA Astrophysics Data System (ADS)

    Ayoub, Simon

    Le reseau de distribution et de transport de l'electricite se modernise dans plusieurs pays dont le Canada. La nouvelle generation de ce reseau que l'on appelle smart grid, permet entre autre l'automatisation de la production, de la distribution et de la gestion de la charge chez les clients. D'un autre cote, des appareils domestiques intelligents munis d'une interface de communication pour des applications du smart grid commencent a apparaitre sur le marche. Ces appareils intelligents pourraient creer une communaute virtuelle pour optimiser leurs consommations d'une facon distribuee. La gestion distribuee de ces charges intelligentes necessite la communication entre un grand nombre d'equipements electriques. Ceci represente un defi important a relever surtout si on ne veut pas augmenter le cout de l'infrastructure et de la maintenance. Lors de cette these deux systemes distincts ont ete concus : un systeme de communication peer-to-peer, appele Ring-Tree, permettant la communication entre un nombre important de noeuds (jusqu'a de l'ordre de grandeur du million) tel que des appareils electriques communicants et une technique distribuee de gestion de la charge sur le reseau electrique. Le systeme de communication Ring-Tree inclut une nouvelle topologie reseau qui n'a jamais ete definie ou exploitee auparavant. Il inclut egalement des algorithmes pour la creation, l'exploitation et la maintenance de ce reseau. Il est suffisamment simple pour etre mis en oeuvre sur des controleurs associes aux dispositifs tels que des chauffe-eaux, chauffage a accumulation, bornes de recharges electriques, etc. Il n'utilise pas un serveur centralise (ou tres peu, seulement lorsqu'un noeud veut rejoindre le reseau). Il offre une solution distribuee qui peut etre mise en oeuvre sans deploiement d'une infrastructure autre que les controleurs sur les dispositifs vises. Finalement, un temps de reponse de quelques secondes pour atteindre 1'ensemble du reseau peut etre obtenu, ce qui est

  7. Mise à jour sur la prévention et le dépistage selon l’âge à l’intention des médecins de soins primaires canadiens

    PubMed Central

    Shimizu, Tawnya; Bouchard, Manon; Mavriplis, Cleo

    2016-01-01

    Résumé Objectif Faire la synthèse des meilleures lignes directrices fondées sur des données probantes concernant la prévention et le dépistage chez les adultes canadiens selon l’âge. Qualité des données Les recommandations du Groupe d’étude canadien sur les soins de santé préventifs représentent la source principale des renseignements et sont complétées par les recommandations pertinentes du Preventive Services Task Force des États-Unis lorsque celles du Groupe d’étude canadien étaient inaccessibles ou désuètes. Les guides de pratique des principales organisations nationales axées spécifiquement sur une maladie ou une spécialité ont aussi fait l’objet d’une révision pour prendre en compte les données factuelles les plus récentes. Message principal Les interventions de dépistage recommandées selon l’âge et le sexe sont présentées dans un tableau de synthèse où est mise en évidence la qualité des données à l’appui de ces recommandations. Un exemple de modèle à suivre dans les dossiers médicaux électroniques ou sur papier est aussi proposé. Conclusion Qu’il s’agisse d’une visite consacrée à la prévention ou d’une occasion saisie autrement de faire du counseling et du dépistage de prévention chez leurs patients, les médecins de soins primaires peuvent se servir de cette synthèse des recommandations fondées sur des données probantes pour maximiser leur efficience et prévenir d’importantes omissions ou des dépistages inutiles.

  8. Forest succession following wildfire and sudden oak death epidemic

    Treesearch

    Clay M. DeLong; Kerri M. Frangioso; Margaret R. Metz; Ross K. Meentemeyer; Dave M. Rizzo

    2013-01-01

    The Big Sur region of central California is a rugged, fire-prone area that has been severely affected by Phytophthora ramorum. Meentemeyer et al. (2008) estimated that over 200,000 oaks and tanoaks had been killed by P. ramorum across the Big Sur ecoregion by 2005. In June of 2008, a complex of lightning-initiated...

  9. Etude Bacteriologique sur 30 Mois dans un Service de Brulés

    PubMed Central

    Chaibdraa, A.; Bentakouk, M.C.

    2008-01-01

    Summary Le pronostic des brûlures est souvent tributaire de complications infectieuses. Les objectifs de cette étude préliminaire rétrospective sont une évaluation de la flore microbienne et ses fluctuations selon la durée d'hospitalisation chez les patients du Centre des brûlés adultes de Annaba (Algérie). Ce travail porte sur 633 prélèvements microbiologiques positifs obtenus entre juin 2003 (inauguration du service) et décembre 2005. Selon le site de prélèvement la répartition est: cutané (78%), hémoculture (9%), prélèvement trachéo-bronchique (4%), uroculture (3%), sonde urinaire (3%), cathéter(3%). Les germes isolés sont: les staphylocoques (58%), les Pseudomonas (20%), le Candida albicans (5%), l'Acinetobacter (3%) et les autres germes (14%). Parmi les staphylocoques et les Pseudomonas recensés, respectivement 19% et 11% sont isolés la première semaine, contre 43% et 52% au-delà de 21 jours. Ces résultats confrontés aux données de la littérature confirment la prédominance du staphylocoque et du Pseudomonas. Le risque de contamination à partir des techniques invasives de réanimation est commun à toutes les équipes. La prolifération bactérienne est en relation avec la durée d'hospitalisation. Ces constatations doivent nous inciter à tirer bénéfice de l'expérience des autres services, en particulier sur les moyens, accessibles, de prévention de l'infection nosocomiale. PMID:21991102

  10. Thermal Modeling of Al-Al and Al-Steel Friction Stir Spot Welding

    NASA Astrophysics Data System (ADS)

    Jedrasiak, P.; Shercliff, H. R.; Reilly, A.; McShane, G. J.; Chen, Y. C.; Wang, L.; Robson, J.; Prangnell, P.

    2016-09-01

    This paper presents a finite element thermal model for similar and dissimilar alloy friction stir spot welding (FSSW). The model is calibrated and validated using instrumented lap joints in Al-Al and Al-Fe automotive sheet alloys. The model successfully predicts the thermal histories for a range of process conditions. The resulting temperature histories are used to predict the growth of intermetallic phases at the interface in Al-Fe welds. Temperature predictions were used to study the evolution of hardness of a precipitation-hardened aluminum alloy during post-weld aging after FSSW.

  11. Proton irradiation studies on Al and Al5083 alloy

    NASA Astrophysics Data System (ADS)

    Bhattacharyya, P.; Gayathri, N.; Bhattacharya, M.; Gupta, A. Dutta; Sarkar, Apu; Dhar, S.; Mitra, M. K.; Mukherjee, P.

    2017-10-01

    The change in the microstructural parameters and microhardness values in 6.5 MeV proton irradiated pure Al and Al5083 alloy samples have been evaluated using different model based techniques of X-ray diffraction Line Profile Analysis (XRD) and microindendation techniques. The detailed line profile analysis of the XRD data showed that the domain size increases and saturates with irradiation dose both in the case of Al and Al5083 alloy. The corresponding microstrain values did not show any change with irradiation dose in the case of the pure Al but showed an increase at higher irradiation doses in the case of Al5083 alloy. The microindendation results showed that unirradiated Al5083 alloy has higher hardness value compared to that of unirradiated pure Al. The hardness increased marginally with irradiation dose in the case of Al5083, whereas for pure Al, there was no significant change with dose.

  12. Combustion synthesis of AlB2-Al2O3 composite powders with AlB2 nanowire structures

    NASA Astrophysics Data System (ADS)

    Yang, Pan; Xiao, Guoqing; Ding, Donghai; Ren, Yun; Yang, Shoulei; Lv, Lihua; Hou, Xing

    2018-05-01

    Using of Al and B2O3 powders as starting materials, and Mg-Al alloy as additives, AlB2-Al2O3 composite powders with AlB2 nanowire structures were successfully fabricated via combustion synthesis method in Ar atmosphere at a pressure of 1.5 MPa. The effect of different amount of Mg-Al alloy on the phase compositions and morphology of the combustion products was investigated. The results revealed that AlB2 and Al2O3 increased, whereas Al decreased with the content of Mg-Al alloy increasing. The impurities MgAl2O4 and AlB12 would exist in the sample with adding of 18 wt% Mg-Al alloy. Interestingly, FESEM/TEM/EDS results showed that AlB2 nanowires were observed in the products when the content of Mg-Al alloy is 6 wt% and 12 wt%. The more AlB2 nanowires can be found as the content of Mg-Al alloy increased. And the yield of AlB2 nanowires with the diameter of about 200 nanometers (nm) and the length up to several tens of micrometers (μm) in the combustion product is highest when the content of Mg-Al alloy is 12 wt%. The vapor, such as Mg-Al (g), B2O2 (g), AlO (g) and Al2O (g), produced during the process of combustion synthesis, reacted with each other to yield AlB2 nanowires by vapor-solid (VS) mechanism and the corresponding model was also proposed.

  13. Interfacial Phenomena in Al/Al, Al/Cu, and Cu/Cu Joints Soldered Using an Al-Zn Alloy with Ag or Cu Additions

    NASA Astrophysics Data System (ADS)

    Pstruś, Janusz; Gancarz, Tomasz

    2014-05-01

    The studies of soldered joints were carried out in systems: Al/solder/Al, Al/solder/Cu, Cu/solder/Cu, where the solder was (Al-Zn)EUT, (Al-Zn)EUT with 0.5, 1.0, and 1.5 at.% of Ag and (Al-Zn)EUT with 0.5, 1.0, and 1.5 at.% of Cu addition. Brazing was performed at 500 °C for 3 min. The EDS analysis indicated that the composition of the layers starting from the Cu pad was CuZn, Cu5Zn8, and CuZn4, respectively. Wetting tests were performed at 500 °C for 3, 8, 15, and 30 min, respectively. Thickness of the layers and their kinetics of growth were measured based on the SEM micrographs. The formation of interlayers was not observed from the side of Al pads. On the contrary, dissolution of the Al substrate and migration of Al-rich particles into the bulk of the solder were observed.

  14. Studying Hostile, Deceptive, and Dangerous Surroundings: Report of a Workshop on Social Research Methods for Non-Permissive Environments (Etudier des Milieux Hostiles, Trompeurs et Dangereux - Rapport Concernant un Atelier sur les Methodes de Recherche Sociale an Milieu non Permissif)

    DTIC Science & Technology

    2010-08-01

    des groupes de consultation pour déterminer l’effet des opérations communes sur la population locale. Ils ont établi des « mesures de rendement...fondées sur les relations avec les habitants et les résultats des groupes de consultation ainsi que des « mesures de production » basées sur la ...l’ethnographie de combat, et la recherche d’initié étranger peuvent aider à tracer les microcosmes sociaux dans un

  15. Orientation relationship of eutectoid FeAl and FeAl2.

    PubMed

    Scherf, A; Kauffmann, A; Kauffmann-Weiss, S; Scherer, T; Li, X; Stein, F; Heilmaier, M

    2016-04-01

    Fe-Al alloys in the aluminium range of 55-65 at.% exhibit a lamellar microstructure of B2-ordered FeAl and triclinic FeAl 2 , which is caused by a eutectoid decomposition of the high-temperature Fe 5 Al 8 phase, the so-called ∊ phase. The orientation relationship of FeAl and FeAl 2 has previously been studied by Bastin et al. [ J. Cryst. Growth (1978 ▸), 43 , 745] and Hirata et al. [ Philos. Mag. Lett. (2008 ▸), 88 , 491]. Since both results are based on different crystallographic data regarding FeAl 2 , the data are re-evaluated with respect to a recent re-determination of the FeAl 2 phase provided by Chumak et al. [ Acta Cryst. (2010 ▸), C 66 , i87]. It is found that both orientation relationships match subsequent to a rotation operation of 180° about a 〈112〉 crystallographic axis of FeAl or by applying the inversion symmetry of the FeAl 2 crystal structure as suggested by the Chumak data set. Experimental evidence for the validity of the previously determined orientation relationships was found in as-cast fully lamellar material (random texture) as well as directionally solidified material (∼〈110〉 FeAl || solidification direction) by means of orientation imaging microscopy and global texture measurements. In addition, a preferential interface between FeAl and FeAl 2 was identified by means of trace analyses using cross sectioning with a focused ion beam. On the basis of these habit planes the orientation relationship between the two phases can be described by ([Formula: see text]01) FeAl || (114)[Formula: see text] and [111] FeAl || [1[Formula: see text]0][Formula: see text]. There is no evidence for twinning within FeAl lamellae or alternating orientations of FeAl lamellae. Based on the determined orientation and interface data, an atomistic model of the structure relationship of Fe 5 Al 8 , FeAl and FeAl 2 in the vicinity of the eutectoid decomposition is derived. This model is analysed with respect to the strain which has to be

  16. Assessment by regional modelling of the impact of monopile foundations on the hydrodynamics and sediment transport: case of Courseulles-sur-Mer (France) wind farm

    NASA Astrophysics Data System (ADS)

    Rivier, Aurélie; Bennis, Anne-Claire; Pinon, Grégory; Magar, Vanesa; Gross, Markus

    2015-04-01

    Offshore monopile foundations of wind turbines modify hydrodynamics and sediment transport at local scale and also at regional scale. The aim of this work is to assess these changes and to parametrize them in a regional model. These modifications were previously evaluated using the regional circulation model MARS3D (Lazure and Dumas, 2008) in tests-cases (Rivier et al., 2014) using two approaches: in the first approach, monopiles are explicitly modelled in the mesh as dry cells and in the second approach a sub-grid parametrization which considers the drag force exerted by a monopile on the flow is used. The sub-grid parametrization is improved close to the bed in this paper by adding a drag force term in the momentum equations, source terms in the turbulence model and by increasing the bed shear stress at monopile location. Changes in hydrodynamics regime, especially near-bed, affect sediment transport regime and modifications due to monopiles on sediment dynamics is also investigated using the MARS3D sediment transport module (Le Hir et al., 2011) which solves the advection-diffusion equations. Test-cases are run using hydrodynamical conditions and sediment grain sizes typical from the area located off Courseulles-sur-Mer (Normandy, France) where an offshore wind farm is planned to be built. Velocity, turbulent kinetic energy and bed thickness changes due to the monopile simulated by both approaches are compared to each other and to experimental measurements made in a flume at the University of Caen or to published data (e.g. Roulund et al., 2005; Dargahi,1989). Then the model is applied in a real configuration on an area including the future offshore wind farm of Courseulles-sur-Mer. Four monopiles are represented in the model using both approaches and modifications of the hydrodynamics and sediment transport are assessed along a tidal cycle. Currents increase at the side edge of the monopile and decrease in front of and downstream the monopile. Turbulent kinetic

  17. Cantu syndrome-associated SUR2 (ABCC9) mutations in distinct structural domains result in KATP channel gain-of-function by differential mechanisms.

    PubMed

    McClenaghan, Conor; Hanson, Alex; Sala-Rabanal, Monica; Roessler, Helen I; Josifova, Dragana; Grange, Dorothy K; van Haaften, Gijs; Nichols, Colin G

    2018-02-09

    The complex disorder Cantu syndrome (CS) arises from gain-of-function mutations in either KCNJ8 or ABCC9 , the genes encoding the Kir6.1 and SUR2 subunits of ATP-sensitive potassium (K ATP ) channels, respectively. Recent reports indicate that such mutations can increase channel activity by multiple molecular mechanisms. In this study, we determined the mechanism by which K ATP function is altered by several substitutions in distinct structural domains of SUR2: D207E in the intracellular L0-linker and Y985S, G989E, M1060I, and R1154Q/R1154W in TMD2. We engineered substitutions at their equivalent positions in rat SUR2A (D207E, Y981S, G985E, M1056I, and R1150Q/R1150W) and investigated functional consequences using macroscopic rubidium ( 86 Rb + ) efflux assays and patch-clamp electrophysiology. Our results indicate that D207E increases K ATP channel activity by increasing intrinsic stability of the open state, whereas the cluster of Y981S/G985E/M1056I substitutions, as well as R1150Q/R1150W, augmented Mg-nucleotide activation. We also tested the responses of these channel variants to inhibition by the sulfonylurea drug glibenclamide, a potential pharmacotherapy for CS. None of the D207E, Y981S, G985E, or M1056I substitutions had a significant effect on glibenclamide sensitivity. However, Gln and Trp substitution at Arg-1150 significantly decreased glibenclamide potency. In summary, these results provide additional confirmation that mutations in CS-associated SUR2 mutations result in K ATP gain-of-function. They help link CS genotypes to phenotypes and shed light on the underlying molecular mechanisms, including consequences for inhibitory drug sensitivity, insights that may inform the development of therapeutic approaches to manage CS. © 2018 by The American Society for Biochemistry and Molecular Biology, Inc.

  18. Segundo Catálogo Estelar del Hemisferio Sur con Astrolabio Fotoeléctrico PAII

    NASA Astrophysics Data System (ADS)

    Manrique, W. T.; Podestá, R. C.; Alonso, E.; Actis, E. V.; Pacheco, A. M.; Bustos, G.; Lizhi, L.; Zezhi, W.; Fanmiao, Z.; Hongqi, W.; Perdomo, R.

    Recordamos que entre el Observatorio Astronómico ``Félix Aguilar'', el Observatorio Astronómico de Beijing y el Observatorio Astronómico de La Plata, se ha convenido en desarrollar un Proyecto de Investigación conjunto, para la observación sistemática de estrellas en el Hemisferio Sur, con el objeto de la elaboración de un Catálogo Estelar Global utilizando un Astrolabio Fotoeléctrico PAII del Observatorio de Beijing, que ha sido usado con éxito en la República de China. En este trabajo se presenta el Segundo Catálogo Estelar del Hemisferio Sur, derivado de las observaciones realizadas con el PAII instalado en el OAFA, durante el períiodo Febrero de 1992 a Marzo de 1997. En este lapso se han observado mas de 400000 pasajes estelares, obteniéndose las correcciones Δ α y Δ δ de 5241 estrellas del FK4, FK5, FK5 Ext., SRS, CAMC y GC. Las precisiones medias son del orden de ± 3,2 ms en ascensión recta y ±0."057 en declinación. Rango de magnitudes : 2,0 a 11,5 Rango de declinaciones : -3o a -60o Epoca Media : 1994.9 Se analizan los residuos en función de la magnitud y tipo espectral, correcciones de grupo y frecuencia de distribución Δ α y Δ δ.

  19. Effets de l'humidite sur la propagation du delaminage dans un composite carbone/epoxy sollicite en mode mixte I/II

    NASA Astrophysics Data System (ADS)

    LeBlanc, Luc R.

    Les materiaux composites sont de plus en plus utilises dans des domaines tels que l'aerospatiale, les voitures a hautes performances et les equipements sportifs, pour en nommer quelques-uns. Des etudes ont demontre qu'une exposition a l'humidite nuit a la resistance des composites en favorisant l'initiation et la propagation du delaminage. De ces etudes, tres peu traitent de l'effet de l'humidite sur l'initiation du delaminage en mode mixte I/II et aucune ne traite des effets de l'humidite sur le taux de propagation du delaminage en mode mixte I/II dans un composite. La premiere partie de cette these consiste a determiner les effets de l'humidite sur la propagation du delaminage lors d'une sollicitation en mode mixte I/II. Des eprouvettes d'un composite unidirectionnel de carbone/epoxy (G40-800/5276-1) ont ete immergees dans un bain d'eau distillee a 70°C jusqu'a leur saturation. Des essais experimentaux quasi-statiques avec des chargements d'une gamme de mixites des modes I/II (0%, 25%, 50%, 75% et 100%) ont ete executes pour determiner les effets de l'humidite sur la resistance au delaminage du composite. Des essais de fatigue ont ete realises, avec la meme gamme de mixite des modes I/II, pour determiner 1'effet de 1'humidite sur l'initiation et sur le taux de propagation du delaminage. Les resultats des essais en chargement quasi-statique ont demontre que l'humidite reduit la resistance au delaminage d'un composite carbone/epoxy pour toute la gamme des mixites des modes I/II, sauf pour le mode I ou la resistance au delaminage augmente apres une exposition a l'humidite. Pour les chargements en fatigue, l'humidite a pour effet d'accelerer l'initiation du delaminage et d'augmenter le taux de propagation pour toutes les mixites des modes I/II. Les donnees experimentales recueillies ont ete utilisees pour determiner lesquels des criteres de delaminage en statique et des modeles de taux de propagation du delaminage en fatigue en mode mixte I/II proposes dans la

  20. Ohmic contacts to Al-rich AlGaN heterostructures

    DOE PAGES

    Douglas, E. A.; Reza, S.; Sanchez, C.; ...

    2017-06-06

    Due to the ultra-wide bandgap of Al-rich AlGaN, up to 5.8 eV for the structures in this study, obtaining low resistance ohmic contacts is inherently difficult to achieve. A comparative study of three different fabrication schemes is presented for obtaining ohmic contacts to an Al-rich AlGaN channel. Schottky-like behavior was observed for several different planar metallization stacks (and anneal temperatures), in addition to a dry-etch recess metallization contact scheme on Al 0.85Ga 0.15N/Al 0.66Ga 0.34N. However, a dry etch recess followed by n +-GaN regrowth fabrication process is reported as a means to obtain lower contact resistivity ohmic contacts onmore » a Al 0.85Ga 0.15N/Al 0.66Ga 0.34N heterostructure. In conclusion, specific contact resistivity of 5×10 -3 Ω cm 2 was achieved after annealing Ti/Al/Ni/Au metallization.« less

  1. Growth and stress-induced transformation of zinc blende AlN layers in Al-AlN-TiN multilayers

    DOE PAGES

    Li, Nan; Yadav, Satyesh K.; Wang, Jian; ...

    2015-12-18

    We report that AlN nanolayers in sputter deposited {111}Al/AlN/TiN multilayers exhibit the metastable zinc-blende-structure (z-AlN). Based on density function theory calculations, the growth of the z-AlN is ascribed to the kinetically and energetically favored nitridation of the deposited aluminium layer. In situ nanoindentation of the as-deposited {111}Al/AlN/TiN multilayers in a high-resolution transmission electron microscope revealed the z-AlN to wurzite AlN phase transformation through collective glide of Shockley partial dislocations on every two {111} planes of the z-AlN.

  2. Comparing the Thermodynamic Behaviour of Al(1)+ZrO2(s) to Al(1)+Al2O3(s)

    NASA Technical Reports Server (NTRS)

    Copland, Evan

    2004-01-01

    In an effort to better determine the thermodynamic properties of Al(g) and Al2O(g). the vapor in equilibrium with Al(l)+ZrO2(s) was compared to the vapor in equilibrium with Al(l)+Al2O3(s) over temperature range 1197-to-1509K. The comparison was made directly by Knudsen effusion-cell mass spectrometry with an instrument configured for a multiple effusion-cell vapor source (multi-cell KEMS). Second law enthalpies of vaporization of Al(g) and Al2O(g) together with activity measurements show that Al(l)+ZrO2(s) is thermodynamically equivalent to Al(l)+Al2O3(s), indicating Al(l) remained pure and Al2O3(s) was present in the ZrO2-cell. Subsequent observation of the Al(l)/ZrO2 and vapor/ZrO2 interfaces revealed a thin Al2O3-layer had formed, separating the ZrO2-cell from Al(l) and Al(g)+Al2O(g), effectively transforming it into an Al2O3 effusion-cell. This behavior agrees with recent observations made for Beta-NiAl(Pt) alloys measured in ZrO2 effusion-cell.

  3. Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling

    NASA Astrophysics Data System (ADS)

    Yu, Hailiang; Lu, Cheng; Tieu, A. Kiet; Li, Huijun; Godbole, Ajit; Kong, Charlie

    2018-06-01

    The roll bonding technique is one of the most widely used methods to produce metal laminate sheets. Such sheets offer interesting research opportunities for both scientists and engineers. In this paper, we report on an experimental investigation of the 'thickness effect' during laminate rolling for the first time. Using a four-high multifunction rolling mill, Cu/Al/Cu laminate sheets were fabricated with a range of thicknesses (16, 40, 70 and 130 μm) of the Al layer. The thickness of the Cu sheets was a constant 300 μm. After rolling, TEM images show good bonding quality between the Cu and Al layers. However, there are many nanoscale pores in the Al layer. The fraction of nanoscale pores in the Al layer increases with a reduction in the Al layer thickness. The finite element method was used to simulate the Cu/Al/Cu rolling process. The simulation results reveal the effect of the Al layer thickness on the deformation characteristics of the Cu/Al/Cu laminate. Finally, we propose that the size effect of the Al layer thickness during Cu/Al/Cu laminate rolling may offer a method to fabricate 'nanoporous' Al sandwich laminate foils. Such foils can be used in electromagnetic shielding of electrical devices and noisy shielding of building.

  4. Caudal hindbrain lactate infusion alters glucokinase, SUR1, and neuronal substrate fuel transporter gene expression in the dorsal vagal complex, lateral hypothalamic area, and ventromedial nucleus hypothalamus of hypoglycemic male rats.

    PubMed

    Vavaiya, Kamlesh V; Briski, Karen P

    2007-10-24

    While in vitro studies show that the oxidizable energy substrate, lactate, is a preferred fuel for CNS neurons during states of energy crisis, and that lactate may regulate neuronal glucose uptake under those conditions, its role in neuronal function in vivo remains controversial. Glucose-excited neurons in hindbrain dorsal vagal complex (DVC) monitor both glucose and lactate, and express both the glucose sensor, glucokinase (GK), and the SUR1 subunit of the plasma membrane energy transducer, K(ATP). Fourth ventricular lactate infusion exacerbates insulin-induced hypoglycemia (IIH) and IIH-associated patterns of DVC neuronal activation. We investigated the hypothesis that during glucoprivation, lactate regulates neuronal monocarboxylate and glucose transporter gene transcription in the DVC, and adjustments in these gene profiles are correlated with altered GK and SUR1 mRNA expression. We also examined whether caudal hindbrain lactate repletion alters the impact of hypoglycemia on substrate fuel uptake and metabolic sensing functions in other characterized metabolic monitoring sites, e.g., the ventromedial hypothalamic nucleus (VMH) and lateral hypothalamic area (LHA). qPCR was used to measure MCT2, GLUT3, GLUT4, GK, and SUR1 transcripts in the microdissected DVC, VMH, and LHA from groups of male rats treated by continuous infusion of aCSF or lactate into the caudal fourth ventricle (CV4), initiated prior to injection of Humulin R or saline. Blood glucose was decreased in response to insulin, a response that was significantly augmented by CV4 lactate infusion. IIH alone did not alter mean DVC MCT2, GLUT3, GLUT4, GK, or SUR1 mRNA levels, but these transcripts were increased in the lactate plus insulin group, relative to both euglycemic and aCSF-infused hypoglycemic rats. IIH decreased MCT2, GLUT3, and SUR1 gene profiles in the VMH; CV4 lactate infusion during IIH further diminished these transcripts, and suppressed GLUT4 and GK mRNA levels in this site. In LHA, IIH

  5. Ti{sub 2}AlN thin films synthesized by annealing of (Ti+Al)/AlN multilayers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cabioch, Thierry, E-mail: Thierry.cabioch@univ-poitiers.fr; Alkazaz, Malaz; Beaufort, Marie-France

    2016-08-15

    Highlights: • Epitaxial thin films of the MAX phase Ti{sub 2}AlN are obtained by thermal annealing. • A new metastable (Ti,Al,N) solid solution with the structure of α-T is evidenced. • The formation of the MAX phase occurs at low temperature (600 °C). - Abstract: Single-phase Ti{sub 2}AlN thin films were obtained by annealing in vacuum of (Ti + Al)/AlN multilayers deposited at room temperature by magnetron sputtering onto single-crystalline (0001) 4H-SiC and (0001) Al{sub 2}O{sub 3} substrates. In-situ X-ray diffraction experiments combined with ex-situ cross-sectional transmission electron microscopy observations reveal that interdiffusion processes occur in the multilayer at amore » temperature of ∼400 °C leading to the formation of a (Ti, Al, N) solid solution, having the hexagonal structure of α-Ti, whereas the formation of Ti{sub 2}AlN occurs at 550–600 °C. Highly oriented (0002) Ti{sub 2}AlN thin films can be obtained after an annealing at 750 °C.« less

  6. Lignes directrices canadiennes sur la rhinosinusite bactérienne aiguë

    PubMed Central

    Kaplan, Alan

    2014-01-01

    Résumé Objectif Faire un résumé clinique des lignes directrices canadiennes sur la rhinosinusite bactérienne aiguë (RSBA) qui présente des éléments d’intérêt pour les médecins de famille. Source des données Les auteurs des lignes directrices ont effectué une recherche documentaire systématique et ont rédigé des recommandations. Une cote a été donnée à la fois en fonction de la fiabilité des données probantes et de la solidité des recommandations. On a sollicité les commentaires d’experts en la matière venant de l’extérieur, ainsi que l’aval de sociétés médicales canadiennes (Association pour la microbiologie médicale et l’infectiologie Canada, Société canadienne d’allergie et d’immunologie clinique, Société canadienne d’otorhinolaryngologie et de chirurgie cervicofaciale, Association canadienne des médecins d’urgence et Regroupement canadien des médecins de famille en santé respiratoire). Message principal Le diagnostic de la RSBA repose sur la présence de symptômes particuliers et leur durée; l’imagerie ou une culture n’est pas nécessaire dans les cas peu compliqués. Le traitement dépend de la gravité des symptômes, notamment avec des corticostéroïdes intranasaux (CSIN) recommandés comme monothérapie pour les cas de légers à modérés, quoique leurs bienfaits soient modestes. Le recours à des CSIN accompagnés d’antibiotiques est réservé aux patients qui ne répondent pas aux CSIN après 72 heures et comme traitement initial des patients dont les symptômes sont graves. Le choix de l’antibiotique doit tenir compte du pathogène soupçonné, du risque de résistance, des problèmes concomitants et des tendances locales de la résistance aux antimicrobiens. Des thérapies d’appoint comme l’irrigation nasale avec une solution saline sont recommandées. En présence de cas réfractaires au traitement, d’épisodes récurrents et de signes de complications, on devrait demander une

  7. Mesures experimentales de l'impact des revetements hydrophobeset superhydrophobes sur la trainee et la portance d'un profil aerodynamique propre et glace

    NASA Astrophysics Data System (ADS)

    Villeneuve, Eric

    Ce projet, realise a la demande du Laboratoire International des Materiaux Antigivre, a pour but de mesurer et definir experimentalement l'impact de revetements hydrophobes sur les coefficients de trainee et de portance d'un profil NACA 0012. Pour ce faire, la balance aerodynamique du LIMA devait tout d'abord etre amelioree afin d'offrir une sensibilite suffisante pour realiser le projet. Plusieurs ameliorations ont ete faites, comme le changement des cellules de charge, la diminution du nombre de cellules de charge, le changement du cadre de la balance, etc. Une fois ces ameliorations terminees, la reproductibilite, l'exactitude et la sensibilite ont ete valides afin de s'assurer de la fiabilite des resultats offerts par la balance. Pour les angles d'attaque etudies avec les revetements, soient -6° et 0°, la balance a une reproductibilite de +/-2,06% a 360 000 de nombre de Reynolds. Pour valider la sensibilite, des essais a -6° et 0° d'angle d'attaque et des nombres de Reynolds de 360 000 et 500 000 ont ete faits avec des papiers sables. Les resultats de ces essais ont permis de, tracer des courbes de tendances du coefficient de trainee du NACA 0012 en fonction de la rugosite de surface et d'etablir la valeur de la sensibilite de la balance a +/-8 mu m. Cinq revetements populaires ont ete choisis pour l'experimentation, soient le Wearlon, le Staclean, le Hirec, le Phasebreak ainsi que le Nusil. Les revetements sont soumis aux memes conditions experimentales que les papiers sables, et une rugosite equivalente est trouvee par extrapolation des resultats. Cependant, les rugosites equivalentes de surfaces different entre -6° et 0°. Les essais avec le Staclean et le Hirec donnent des coefficients de trainee equivalent a ceux avec l'aluminium, alors que le Wearlon, le Nusil et le Phasebreak donnent une augmentation du coefficient de trainee de 13%, 17% et 25% respectivement par rapport a l'aluminium. Pour les coefficients de portance, la balance ne detecte pas l

  8. ALS Association

    MedlinePlus

    ... toward a world without ALS! Walk to Defeat ALS® Walk to Defeat ALS® draws people of all ... We need your help. I Will Advocate National ALS Registry The National ALS Registry is a congressionally ...

  9. Pockmarks off Big Sur, California

    USGS Publications Warehouse

    Paull, C.; Ussler, W.; Maher, N.; Greene, H. Gary; Rehder, G.; Lorenson, T.; Lee, H.

    2002-01-01

    A pockmark field was discovered during EM-300 multi-beam bathymetric surveys on the lower continental slope off the Big Sur coast of California. The field contains ??? 1500 pockmarks which are between 130 and 260 m in diameter, and typically are 8-12 m deep located within a 560 km2 area. To investigate the origin of these features, piston cores were collected from both the interior and the flanks of the pockmarks, and remotely operated vehicle observation (ROV) video and sampling transects were conducted which passed through 19 of the pockmarks. The water column within and above the pockmarks was sampled for methane concentration. Piston cores and ROV collected push cores show that the pockmark field is composed of monotonous fine silts and clays and the cores within the pockmarks are indistinguishable from those outside the pockmarks. No evidence for either sediment winnowing or diagenetic alteration suggestive of fluid venting was obtained. 14C measurements of the organic carbon in the sediments indicate continuous sedimentation throughout the time resolution of the radiocarbon technique ( ??? 45000 yr BP), with a sedimentation rate of ??? 10 cm per 1000 yr both within and between the pockmarks. Concentrations of methane, dissolved inorganic carbon, sulfate, chloride, and ammonium in pore water extracted from within the cores are generally similar in composition to seawater and show little change with depth, suggesting low biogeochemical activity. These pore water chemical gradients indicate that neither significant accumulations of gas are likely to exist in the shallow subsurface ( ??? 100 m) nor is active fluid advection occurring within the sampled sediments. Taken together the data indicate that these pockmarks are more than 45000 yr old, are presently inactive, and contain no indications of earlier fluid or gas venting events. ?? 2002 Elsevier Science B.V. All rights reserved.

  10. Implementation of tsunami disaster prevention measures in the municipality of San Rafael del Sur, Nicaragua

    NASA Astrophysics Data System (ADS)

    Strauch, W.; Talavera, E.; Acosta, N.; Sanchez, M.; Mejia, E.

    2007-05-01

    The Nicaraguan Pacific coast presents considerable tsunami risk. On September 1, 1992, a tsunami caused enormous damage in the infrastructure and killed more than 170 people. A pilot project was conducted between 2006 and 2007 in the municipality of San Rafel del Sur, area of Masachapa, The project included multiple topics of tsunami prevention measures and considering the direct participation of the local population, as: -General education on disaster prevention, participative events; -Investigation of awareness level and information needs for different population groups; -Specific educational measures in the schools; -Publication of brochures, calendars, news paper articles, radio programs, TV spots -Development of local tsunami hazard maps, 1:5,000 scale; (based on previous regional tsunami hazard mapping projects and local participation) -Development of a tsunami warning plan; -Improvements of the national tsunami warning system. -Installation of sirens for tsunami warning -Installation of tsunami signs, indicating hazardous areas, evacuation routes, safe places; -Realization of evacuation drills in schools. Based on the experiences gained in Masachapa it is planned to run similar projects in other areas along the Nicaraguan Pacific coast. In the project participated the local municipality and local stakeholders of San Rafael del Sur, Ministry of Education, National Police, Nicaraguan Red Cross, Ministry of Health, Ministry of Tourism, Nicaraguan Geosciences Institute (INETER), National System for Disaster Prevention (SINAPRED), Swiss Agency for Development and Cooperation (SDC). It was financed by SDC and INETER.

  11. Piezo-tunnel effect in Al/Al2O3/Al junctions elaborated by atomic layer deposition

    NASA Astrophysics Data System (ADS)

    Rafael, R.; Puyoo, E.; Malhaire, C.

    2017-11-01

    In this work, the electrical transport in Al/Al2O3/Al junctions under mechanical stress is investigated in the perspective to use them as strain sensors. The metal/insulator/metal junctions are elaborated with a low temperature process (≤200 °C) fully compatible with CMOS back-end-of-line. The conduction mechanism in the structure is found to be Fowler-Nordheim tunneling, and efforts are made to extract the relevant physical parameters. Gauge factors up to -32.5 were found in the fabricated devices under tensile stress. Finally, theoretical mechanical considerations give strong evidence that strain sensitivity in Al/Al2O3/Al structures originates not only from geometrical deformations but also from the variation of interface barrier height and/or effective electronic mass in the tunneling oxide layer.

  12. Influence of AlN(0001) Surface Reconstructions on the Wettability of an Al/AlN System: A First-Principle Study.

    PubMed

    Cao, Junhua; Liu, Yang; Ning, Xiao-Shan

    2018-05-11

    A successful application of a hot dip coating process that coats aluminum (Al) on aluminum nitride (AlN) ceramics, revealed that Al had a perfect wettability to the ceramics under specific circumstances, which was different from previous reports. In order to elucidate the mechanism that controlled the supernormal wetting phenomenon during the dip coating, a first-principle calculation of an Al(111)/AlN(0001) interface, based on the density functional theory (DFT), was employed. The wettability of the Al melt on the AlN(0001) surface, as well as the effect that the surface reconstruction of AlN and the oxygen adsorption had on Al for the adhesion and the wettability of the Al/AlN system, were studied. The results revealed that a LCM (laterally contracted monolayer) reconstruction could improve the adhesion and wettability of the system. Oxygen adsorption on the free surface of Al decreased the contact angle, because the adsorption reduced of the surface tension of Al. A prefect wetting was obtained only after some of the oxygen atoms adsorbed on the free surface of Al. The supernormal wetting phenomenon came from the surface reconstruction of the AlN and the adsorption of oxygen atoms on the Al melt surface.

  13. Japanese version of the ALS-FTD-Questionnaire (ALS-FTD-Q-J).

    PubMed

    Watanabe, Yasuhiro; Beeldman, Emma; Raaphorst, Joost; Izumi, Yuishin; Yoshino, Hiide; Masuda, Michihito; Atsuta, Naoki; Ito, Satoru; Adachi, Tadashi; Adachi, Yoshiki; Yokota, Osamu; Oda, Masaya; Hanashima, Ritsuko; Ogino, Mieko; Ichikawa, Hiroo; Hasegawa, Kazuko; Kimura, Hideki; Shimizu, Toshio; Aiba, Ikuko; Yabe, Hayato; Kanba, Makoto; Kusumi, Kimiyoshi; Aoki, Tetsuya; Hiroe, Yu; Watanabe, Hirohisa; Nishiyama, Kazutoshi; Nomoto, Masahiro; Sobue, Gen; Nakashima, Kenji

    2016-08-15

    Amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) share common clinical, genetic and neuropathological features. Some ALS patients have behavioral/personality changes, which could result in significant obstacles in the care provided by family members and caregivers. An easy screening tool would contribute greatly to the evaluation of these symptoms. We translated the ALS-FTD-Questionnaire, developed in the Netherlands, into Japanese (ALS-FTD-Q-J) and examined the clinimetric properties (internal consistency, construct and clinical validity). Patients with ALS and/or behavioral variant FTD (bvFTD) were evaluated alongside healthy controls in this multicenter study. All ALS patients, regardless of bvFTD status, were further evaluated by the frontal behavioral inventory (FBI) and for frontal/executive function, cognition, anxiety/depression, and motor functions. Data from 146 subjects were analyzed: ALS (92), ALS-bvFTD (6), bvFTD (16), and healthy controls (32). The internal consistency of the ALS-FTD-Q-J was good (Cronbach α=0.92). The ALS-FTD-Q-J showed construct validity as it exhibited a high correlation with the FBI (r=0.79). However, correlations were moderate with anxiety/depression and low with cognitive scales, in contrast to the original report, i.e. a moderate correlation with cognition and a low correlation with anxiety/depression. The ALS-FTD-Q-J discriminated ALS patients from (ALS-)bvFTD patients and controls. Thus, the ALS-FTD-Q-J is useful for evaluating Japanese ALS/FTD patients. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. 3-Dimensional Microstructure of Al-Al3Ti Alloy Severely Deformed by ECAP

    NASA Astrophysics Data System (ADS)

    Sato, Hisashi; Hishikawa, Takahisa; Makino, Yuuki; Kunimine, Takahiro; Watanabe, Yoshimi

    Microstructure of Al-Al3Ti alloy deformed by Equal-Channel-Angular Pressing (ECAP) is 3-dimensionally investigated. Especially, distribution of Al3Ti particles is focused in this study. The Al-Al3Ti alloy has coarse Al3Ti platelet particles in α-Al matrix. When the Al-Al3Ti alloy is deformed by ECAP under route A, fine Al3Ti platelet particles are observed. These Al3Ti platelet particles are aligned along to deformation axis, and its plane normal is perpendicular to the deformation axis. On the other hand, Al-Al3Ti alloy ECAPed under route Bc forms several groups consisted of fine Al3Ti platelet particles. Moreover, longitudinal size of the Al3Ti particle groups is close to that of initial Al3Ti particles with 4-pass ECAP specimen. These distribution behaviors of the Al3Ti particle can be explained by plastic flow of α-Al matrix. Finally, it is concluded that distribution of Al3Ti particle in Al-Al3Ti alloy by ECAP is controlled by plastic deformation of α-Al matrix.

  15. Abu al-Layth al-Libi

    DTIC Science & Technology

    2015-02-01

    in the region and apparently “showed brilliance in this regard through his perfect memorization , clever understanding, persistence, and patience...Taliban’s officials quietly left the capital without informing 73 Vernie Liebl, “Al-Qaida on the US Invasion of Afghanistan in Their Own Words ,” Small Wars... memorization . A talented and charismatic orator, he also used to deliver eulogies and `Id sermons. As to `Abdallah Sa`id al-Libi, his profile is similar

  16. Defect structures in ordered intermetallics; grain boundaries and surfaces in FeAl, NiAl, CoAl and TiAl

    NASA Astrophysics Data System (ADS)

    Mutasa, Batsirai Manyara

    Ordered intermetallics based on transition metal aluminides have been proposed as structural materials for advanced aerospace applications. The development of these materials, which have the advantages of low density and high operating temperatures, have been focused on the aluminides of titanium, nickel and iron. Though these materials exhibit attractive properties at elevated temperatures, their utilization is limited due to their propensity for low temperature fracture and susceptibility to decreased ductility due to environmental effects. A major embrittlement mechanism at ambient temperatures in these aluminides has been by the loss of cohesive strength at the interfaces (intergranular failure). This study focuses on this mechanism of failure, by undertaking a systematic study of the energies and structures of specific grain boundaries in some of these compounds. The relaxed atomistic grain boundary structures in B2 aluminides, FeAl, NiAl and CoAl and L10 gamma-TiAl were investigated using molecular statics and embedded atom potentials in order to explore general trends for a series of B2 compounds as well as TiAl. The potentials used correctly predict the proper mechanism of compositional disorder of these compounds. Using these potentials, point defects, free surface energies and various grain boundary structures of similar energies in three B2 compounds, FeAl, NiAl and CoAl were studied. These B2 alloys exhibited increasing anti-phase boundary energies respectively. The misorientations chosen for detailed study correspond to the Sigma5(310) and Sigma5(210) boundaries. These boundaries were investigated with consideration given to possible variations in the local chemical composition. The effects of both boundary stoichiometry and bulk stoichiometry on grain boundary energetics were also considered. Defect energies were calculated for boundaries contained in both stoichiometric and off-stoichiometric bulk. The surface energies for these aluminides were also

  17. A Rechargeable Al/S Battery with an Ionic-Liquid Electrolyte.

    PubMed

    Gao, Tao; Li, Xiaogang; Wang, Xiwen; Hu, Junkai; Han, Fudong; Fan, Xiulin; Suo, Liumin; Pearse, Alex J; Lee, Sang Bok; Rubloff, Gary W; Gaskell, Karen J; Noked, Malachi; Wang, Chunsheng

    2016-08-16

    Aluminum metal is a promising anode material for next generation rechargeable batteries owing to its abundance, potentially dendrite-free deposition, and high capacity. The rechargeable aluminum/sulfur (Al/S) battery is of great interest owing to its high energy density (1340 Wh kg(-1) ) and low cost. However, Al/S chemistry suffers poor reversibility owing to the difficulty of oxidizing AlSx . Herein, we demonstrate the first reversible Al/S battery in ionic-liquid electrolyte with an activated carbon cloth/sulfur composite cathode. Electrochemical, spectroscopic, and microscopic results suggest that sulfur undergoes a solid-state conversion reaction in the electrolyte. Kinetics analysis identifies that the slow solid-state sulfur conversion reaction causes large voltage hysteresis and limits the energy efficiency of the system. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Paleogeographic implications of an erosional remnant of Paleogene rocks southwest of the Sur-Nacimiento Fault Zone, southern Coast Ranges, California

    USGS Publications Warehouse

    Vedder, J.G.; McLean, H.; Stanley, R.G.; Wiley, T.J.

    1991-01-01

    A small tract of heretofore-unrecognized Paleogene rocks lies about 30 km northeast of Santa Maria and 1 km southwest of the Sur-Nacimiento fault zone near upper Pine Creek. This poorly exposed assemblage of rocks is less than 50 m thick, lies unconformably on regionally distributed Upper Cretaceous submarine-fan deposits, and consists of three units: fossiliferous lower Eocene mudstone, Oligocene(?) conglomerate, and basaltic andesite that has a radiometric age of 26.6 ?? 0.5 Ma. Both the sedimentary and igneous constituents in the Paleogene sequence are unlike those of known sequences on either side of the Sur-Nacimiento fault zone. The Paleogene sedimentary rocks near upper Pine Creek presumably are remnants of formerly widespread early Eocene bathyal deposits and locally distributed Oligocene(?) fluvial deposits southwest of the fault zone. The 26.6 Ma basaltic andesite, however, may not have extended much beyond its present outcrops. An episode of Oligocene(?) displacement is required by the contrast in thicknesses, depositional patterns, and paleobathymetry of the juxtaposed rock sequences. -from Authors

  19. Growth of Ni-Al alloys on Ni(1 1 1), from Al deposits of various thicknesses: (II) Formation of NiAl over a Ni 3Al interfacial layer

    NASA Astrophysics Data System (ADS)

    Le Pévédic, S.; Schmaus, D.; Cohen, C.

    2007-01-01

    This paper describes the second part of a study devoted to the growth of thin Ni-Al alloys after deposition of Al on Ni(1 1 1). In the previous paper [S. Le Pévédic, D. Schmaus, C. Cohen, Surf. Sci. 600 (2006) 565] we have described the results obtained for ultra-thin Al deposits, leading, after annealing at 750 K, to an epitaxial layer of Ni 3Al(1 1 1). In the present paper we show that this regime is only observed for Al deposits smaller than 8 × 10 15 Al/cm 2 and we describe the results obtained for Al deposits exceeding this critical thickness, up to 200 × 10 15 Al/cm 2. Al deposition was performed at low temperature (around 130 K) and the alloying process was followed in situ during subsequent annealing, by Auger electron spectroscopy, low energy electron diffraction and ion beam analysis-channeling measurements, in an ultra-high vacuum chamber connected to a Van de Graaff accelerator. We evidence the formation, after annealing at 750 K, of a crystallographically and chemically well-ordered NiAl(1 1 0) layer (whose thickness depends on the deposited Al amount), over a Ni 3Al "interfacial" layer (whose thickness—about 18 (1 1 1) planes—is independent of the deposited Al amount). The NiAl overlayer is composed of three variants, at 120° from each other in the surface plane, in relation with the respective symmetries of NiAl(1 1 0) and Ni 3Al(1 1 1). The NiAl layer is relaxed (the lattice parameters of cc-B2 NiAl and fcc-L1 2 Ni 3Al differ markedly), and we have determined its epitaxial relationship. In the case of the thickest alloyed layer formed the results concerning the structure of the NiAl layer have been confirmed and refined by ex situ X-ray diffraction and information on its grain size has been obtained by ex situ Atomic Force Microscopy. The kinetics of the alloying process is complex. It corresponds to an heterogeneous growth leading, above the thin Ni 3Al interfacial layer, to a mixture of Al and NiAl over the whole Al film, up to the

  20. Multidisciplinary ALS care improves quality of life in patients with ALS.

    PubMed

    Van den Berg, J P; Kalmijn, S; Lindeman, E; Veldink, J H; de Visser, M; Van der Graaff, M M; Wokke, J H J; Van den Berg, L H

    2005-10-25

    To examine the effect of multidisciplinary ALS care on the quality-of-life (QoL) in patients with ALS and their caregivers. In a cross-sectional study, 208 patients with ALS and their caregivers were interviewed. QoL was assessed using the 36-item Short Form Health Survey (SF-36) and two visual analogue scales (VAS). Criteria for multidisciplinary ALS care were: an ALS team headed by a consultant in rehabilitation medicine and consisting of at least a physical therapist, occupational therapist, speech pathologist, dietician and a social worker; use of the Dutch ALS consensus guidelines for ALS care; and at least six incident ALS patients per year. Clinical characteristics and functional loss of the 133 patients receiving multidisciplinary ALS care and the 75 patients receiving general ALS care were similar. The percentage of patients with adequate aids and appliances was higher in those with multidisciplinary ALS care (93.1 vs 81.3%, p = 0.008), whereas the number of visits to professional caregivers was similar in both groups. Patients in the multidisciplinary ALS care group had a better mental QoL on the SF-36 Mental Summary Score than those in the general care group (p = 0.01). The difference in QoL was most pronounced in the domains of Social Functioning and Mental Health, and was independent of the presence of aids and appliances. No significant differences were found in the SF-36 Physical Summary Score, VAS, or in QoL of caregivers of patients with ALS. High standard of care improves mental quality-of-life in patients with ALS.

  1. Ultraviolet radiation modelling from ground-based and satellite measurements on Reunion Island, southern tropics

    NASA Astrophysics Data System (ADS)

    Lamy, Kévin; Portafaix, Thierry; Brogniez, Colette; Godin-Beekmann, Sophie; Bencherif, Hassan; Morel, Béatrice; Pazmino, Andrea; Metzger, Jean Marc; Auriol, Frédérique; Deroo, Christine; Duflot, Valentin; Goloub, Philippe; Long, Charles N.

    2018-01-01

    Surface ultraviolet radiation (SUR) is not an increasing concern after the implementation of the Montreal Protocol and the recovery of the ozone layer (Morgenstern et al., 2008). However, large uncertainties remain in the prediction of future changes of SUR (Bais et al., 2015). Several studies pointed out that UV-B impacts the biosphere (Erickson et al., 2015), especially the aquatic system, which plays a central part in the biogeochemical cycle (Hader et al., 2007). It can affect phytoplankton productivity (Smith and Cullen, 1995). This influence can result in either positive or negative feedback on climate (Zepp et al., 2007). Global circulation model simulations predict an acceleration of the Brewer-Dobson circulation over the next century (Butchart, 2014), which would lead to a decrease in ozone levels in the tropics and an enhancement at higher latitudes (Hegglin and Shepherd, 2009). Reunion Island is located in the tropics (21° S, 55° E), in a part of the world where the amount of ozone in the ozone column is naturally low. In addition, this island is mountainous and the marine atmosphere is often clean with low aerosol concentrations. Thus, measurements show much higher SUR than at other sites at the same latitude or at midlatitudes. Ground-based measurements of SUR have been taken on Reunion Island by a Bentham DTMc300 spectroradiometer since 2009. This instrument is affiliated with the Network for the Detection of Atmospheric Composition Change (NDACC). In order to quantify the future evolution of SUR in the tropics, it is necessary to validate a model against present observations. This study is designed to be a preliminary parametric and sensitivity study of SUR modelling in the tropics. We developed a local parameterisation using the Tropospheric Ultraviolet and Visible Model (TUV; Madronich, 1993) and compared the output of TUV to multiple years of Bentham spectral measurements. This comparison started in early 2009 and continued until 2016. Only

  2. Profil bactériologique du pied diabétique et son impact sur le choix des antibiotiques

    PubMed Central

    Zemmouri, Adil; Tarchouli, Mohamed; Benbouha, Abdellatif; Lamkinsi, Tarik; Bensghir, Mustapha; Elouennass, Mostafa; Haimeur, Cherqui

    2015-01-01

    Introduction Analyse du profil bactériologique des pieds diabétiques pris en charge à l'hôpital militaire de Rabat et son influence sur l'antibiothérapie de première intention. Méthodes Etude prospective non randomisée étalée sur 18 mois, ayant concerné 105 patients. Après recueil des données et en attente des résultats bactériologiques nos patients ont été divisés en deux groupes: un groupe a été mis sous Amoxicilline + Acide clavulanique + Gentamycine (59 patients) et un groupe sous Ertapénème±Gentamycine (46 patients). Résultats L’étude a regroupé 85 hommes et 20 femmes (sexe ratio = 4.26). L’âge moyen est de 64.4 ans. La gangrène a été observée chez 79% des malades; elle était humide-donc surinfectée en principe- dans 43% des cas. Par ailleurs, 67% des malades ont un chiffre de globules blancs 12000 définissant une infection sévère. L'ostéolyse a été mise en évidence chez 27% de nos patients. Parmi les différentes techniques de prélèvements: 81% ont été profonds dont 21% de biopsie osseuse per opératoire et 14% de prélèvements combinés. 42% de ces prélèvements sont poly microbiens et 21% sont stériles. Les résultats bactériologiques viennent confirmer la prédominance des bactéries aérobies à Gram positif. Le taux de remplacement de l'Ertapénème est de 22% contre un taux de 50% pour l'Amoxiclav. Conclusion L'antibiothérapie ne doit être instaurée qu'en cas d'infection du pied diabétique diagnostiquée sur les critères cliniques établis par les consensus internationaux récents. Le respect des mesures de lutte contre la diffusion de la résistance bactérienne s'avère primordiale. PMID:27386024

  3. AlGaN-based ultraviolet light-emitting diodes on sputter-deposited AlN templates with epitaxial AlN/AlGaN superlattices

    NASA Astrophysics Data System (ADS)

    Zhao, Lu; Zhang, Shuo; Zhang, Yun; Yan, Jianchang; Zhang, Lian; Ai, Yujie; Guo, Yanan; Ni, Ruxue; Wang, Junxi; Li, Jinmin

    2018-01-01

    We demonstrate AlGaN-based ultraviolet light-emitting diodes (UV-LEDs) grown by metalorganic chemical vapor deposition (MOCVD) on sputter-deposited AlN templates upon sapphire substrates. An AlN/AlGaN superlattices structure is inserted as a dislocation filter between the LED structure and the AlN template. The full width at half maximum values for (0002) and (10 1 bar 2) X-ray rocking curves of the n-type Al0.56Ga0.44N layer are 513 and 1205 arcsec, respectively, with the surface roughness of 0.52 nm. The electron concentration and mobility measured by Hall measurement are 9.3 × 1017cm-3 and 54 cm2/V·s at room temperature, respectively. The light output power of a 282-nm LED reaches 0.28 mW at 20 mA with an external quantum efficiency of 0.32%. And the values of leakage current and forward voltage of the LEDs are ∼3 nA at -10 V and 6.9 V at 20 mA, respectively, showing good electrical performance. It is expected that the cost of the UV-LED can be reduced by using sputter-deposited AlN template.

  4. Modern carbonate sediments and environments of the LaPaz region, Baja California Sur, Mexico

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Halfar, J.; Ingle, J.C. Jr.; Cruz-Orozco, R.

    1996-12-31

    The Gulf of California represents one of the most productive and unique marginal seas in the world. The mouth of the Gulf captures warm equatorial water while annual wind patterns assure major upwelling of nutrient-rich water leading to a rich marine biota. These conditions have created a wide array of tropical through warm temperate carbonate environments. The most unusual of these environments is located in the La Paz region of Baja California Sur where tropical-subtropical water temperatures and low rainfall have allowed growth of corals, calcareous red algae, and other shelled invertebrates to form a carbonate bank environment. Sampling andmore » mapping transacts in shallow bays north of La Paz and on the adjacent Espiritu Santo island have revealed a full spectrum of subenvironments including mangrove bordered, terrigenous mud dominated coastal zones, which grade into carbonate tidal flats. In addition, single coral heads as well as incipient reef structures constructed by Porites and Pocillopora coral are present in deeper water areas. Coralline red algae, which are increasingly utilized for paleoenvironmental reconstructions, grow in high abundance on coral debris and in soft sediments and turn out to be main contributors to the La Paz carbonates. Analysis of siliciclastic admixtures, grain size and organic carbon content allow a classification of distinct environments. These data are supplemented by an evaluation of benthic foraminiferal zonations and the varying abundance of biogenic constituents. This Baja California Sur carbonate environment holds special relevance for the interpretation of analogous Neogene and Paleogene paleoenvironments marking major paleoclimatic and paleoceanographic events along the Pacific Coast of North America.« less

  5. Modern carbonate sediments and environments of the LaPaz region, Baja California Sur, Mexico

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Halfar, J.; Ingle, J.C. Jr.; Cruz-Orozco, R.

    1996-01-01

    The Gulf of California represents one of the most productive and unique marginal seas in the world. The mouth of the Gulf captures warm equatorial water while annual wind patterns assure major upwelling of nutrient-rich water leading to a rich marine biota. These conditions have created a wide array of tropical through warm temperate carbonate environments. The most unusual of these environments is located in the La Paz region of Baja California Sur where tropical-subtropical water temperatures and low rainfall have allowed growth of corals, calcareous red algae, and other shelled invertebrates to form a carbonate bank environment. Sampling andmore » mapping transacts in shallow bays north of La Paz and on the adjacent Espiritu Santo island have revealed a full spectrum of subenvironments including mangrove bordered, terrigenous mud dominated coastal zones, which grade into carbonate tidal flats. In addition, single coral heads as well as incipient reef structures constructed by Porites and Pocillopora coral are present in deeper water areas. Coralline red algae, which are increasingly utilized for paleoenvironmental reconstructions, grow in high abundance on coral debris and in soft sediments and turn out to be main contributors to the La Paz carbonates. Analysis of siliciclastic admixtures, grain size and organic carbon content allow a classification of distinct environments. These data are supplemented by an evaluation of benthic foraminiferal zonations and the varying abundance of biogenic constituents. This Baja California Sur carbonate environment holds special relevance for the interpretation of analogous Neogene and Paleogene paleoenvironments marking major paleoclimatic and paleoceanographic events along the Pacific Coast of North America.« less

  6. Bio-optical profile data report coastal transition zone program, R/V Point Sur, June 15-28, 1987

    NASA Technical Reports Server (NTRS)

    Davis, Curtiss O.; Rhea, W. Joseph

    1990-01-01

    Twenty vertical profiles of the bio-optical properties of the ocean were made during a research cruise on the R/V Point Sur, June 15 to 28, 1987, as part of the Coastal Transition Zone Program off Point Arena, California. Extracted chlorophyll values were also measured at some stations to provide calibration data for the in situ fluorometer. This summary provides investigators with an overview of the data collected. The entire data set is available in digital form.

  7. Cyclic oxidation resistance of a reaction milled NiAl-AlN composite

    NASA Technical Reports Server (NTRS)

    Lowell, Carl E.; Barrett, Charles A.; Whittenberger, J. D.

    1990-01-01

    Based upon recent mechanical property tests a NiAl-AlN composite produced by cryomilling has very attractive high temperature strength. This paper focuses on the oxidation resistance of the NiAl-AlN composite at 1473 and 1573 K as compared to that of Ni-47Al-0.15Zr, one of the most oxidation resistant intermetallics. The results of cyclic oxidation tests show that the NiAl-AlN composite has excellent properties although not quite as good as those of Ni-47Al-0.15Zr. The onset of failure of the NiAl-AlN was unique in that it was not accompanied by a change in scale composition from alumina to less protective oxides. Failure in the composite appears to be related to the entrapment of AlN particles within the alumina scale.

  8. ALS-Plus Syndrome: Non-Pyramidal Features in a Large ALS Cohort

    PubMed Central

    McCluskey, Leo; Vandriel, Shannon; Elman, Lauren; Van Deerlin, Vivianna M.; Powers, John; Boller, Ashley; Wood, Elisabeth McCarty; Woo, John; McMillan, Corey T.; Rascovsky, Katya; Grossman, Murray

    2014-01-01

    Objective Autopsy studies show widespread pathology in amyotrophic lateral sclerosis (ALS), but clinical surveys of multisystem disease in ALS are rare. We investigated ALS-Plus syndrome, an understudied group of patients with clinical features extending beyond pyramidal and neuromuscular systems with or without cognitive/behavioral deficits. Methods In a large, consecutively-ascertained cohort of 550 patients with ALS, we documented atypical clinical manifestations. Genetic screening for C9orf72 hexanucleotide expansions was performed in 343 patients, and SOD1, TARDBP, and VCP were tested in the subgroup of patients with a family history of ALS. Gray matter and white matter imaging was available in a subgroup of 30 patients. Results Seventy-five (13.6%) patients were identified with ALS-Plus syndrome. We found disorders of ocular motility, cerebellar, extrapyramidal and autonomic functioning. Relative to those without ALS-Plus, cognitive impairment (8.0% vs 2.9%, p=0.029), bulbar-onset (49.3% vs 23.2%, p<0.001), and pathogenic mutations (20.0% vs 8.4%, p=0.015) were more than twice as common in ALS-Plus. Survival was significantly shorter in ALS-Plus (29.66 months vs 42.50 months, p=0.02), regardless of bulbar-onset or mutation status. Imaging revealed significantly greater cerebellar and cerebral disease in ALS-Plus compared to those without ALS-Plus. Conclusions ALS-Plus syndrome is not uncommon, and the presence of these atypical features is consistent with neuropathological observations that ALS is a multisystem disorder. ALS-Plus syndrome is associated with increased risk for poor survival and the presence of a pathogenic mutation. PMID:25086858

  9. Mise à jour sur l’utilisation clinique de la buprénorphine

    PubMed Central

    Ducharme, Simon; Fraser, Ronald; Gill, Kathryn

    2012-01-01

    Résumé Objectif Examiner les données scientifiques actuelles sur la buprénorphine-naloxone pour le traitement des troubles liés aux opioïdes, en insistant sur le contexte des soins primaires. Qualité des données On a fait une recension dans MEDLINE et la base de données Cochrane des synthèses critiques. Les données probantes sont surtout de niveau I. Message principal La buprénorphine est un agoniste partiel des récepteurs μ des opioïdes et un antagoniste des récepteurs κ des opioïdes ayant une longue demi-vie et un potentiel moins grand que la méthadone d’entraîner un usage abusif. Pour une désintoxication, la buprénorphine est au moins équivalente à la méthadone et supérieure à la clonidine. Comme thérapie de substitution, la buprénorphine est clairement supérieure au placebo. La méthadone comporte de légers avantages en ce qui a trait à la rétention en thérapie, mais une approche par étape en utilisant initialement la buprénorphine-naloxone est aussi efficace. Il est possible, sécuritaire et efficace de recourir à la buprénorphine en milieu de soins primaires. On peut obtenir l’autorisation de prescrire de la buprénorphine après avoir suivi une formation en ligne. Conclusion La buprénorphine est un agent sécuritaire et efficace pour la désintoxication en cas de dépendance aux opioïdes. Elle peut servir d’agent de première intention dans les programmes de thérapie de substitution, en raison de son potentiel plus faible d’usage abusif en comparaison d’autres opioïdes. Son efficacité en milieux de soins primaires en fait un outil thérapeutique utile pour les médecins de famille.

  10. Valence subband coupling effect on polarization of spontaneous emissions from Al-rich AlGaN/AlN quantum wells.

    PubMed

    Lu, Huimin; Yu, Tongjun; Yuan, Gangcheng; Jia, Chuanyu; Chen, Genxiang; Zhang, Guoyi

    2012-12-03

    The optical polarization properties of Al-rich AlGaN/AlN quantum wells (QWs) were investigated using the theoretical model based on the k·p method. Numerical results show that there is valence subband coupling which can influence the peak emission wavelength and emission intensity for TE and TM polarization components from Al-rich AlGaN/AlN QWs. Especially the valence subband coupling could be strong enough when CH1 is close to HH1 and LH1 subbands to modulate the critical Al content switching dominant emissions from TE to TM polarization. It is believed that the valence subband coupling may give important influence on polarization properties of spontaneous emissions and should be considered in designing high efficiency AlGaN-based ultraviolet (UV) LEDs.

  11. Modulating optical polarization properties of Al-rich AlGaN/AlN quantum well by controlling wavefunction overlap

    NASA Astrophysics Data System (ADS)

    Chen, X. J.; Yu, T. J.; Lu, H. M.; Yuan, G. C.; Shen, B.; Zhang, G. Y.

    2013-10-01

    Using modified k.p perturbation method, the optical polarization properties of Al-rich AlGaN/AlN quantum wells (QWs) are studied. It is found that change of wavefunction overlaps between conduction band and valance subbands of heavy hole, light hole, and crystal-field split off hole is different. Such difference leads to the overturn of polarization degree and modulates optical polarization properties as well width and strain vary. This prompts that changing wavefunction overlaps of electron and hole can lead to a way to modulate optical polarization properties of Al-rich AlGaN/AlN QWs, on no condition that valence band order changes.

  12. Effect of AlB2 on the P-threshold in Al-Si alloy

    NASA Astrophysics Data System (ADS)

    Wu, Yuying; Liu, Xiangfa

    2018-06-01

    The nucleation of primary Si in Al-Si alloys has been investigated in this work. It was found that there was a threshold concentration of P, below which AlP can not heterogeneous nucleate primary Si in Al-12 wt%Si alloy. AlB2 can not nucleate primary Si directly, but the presence of AlB2 may assist the nucleation of AlP leading to the nucleation of primary Si particles. In addition, with addition of AlB2, the nucleation efficiency of AlP can be improved in Al-18 wt%Si alloy. The orientation relationship between AlB2 and AlP has been calculated, and the adsorption model for AlB2 and AlP was proposed in this work.

  13. Influence des interactions entre écrans de soutènement sur le calcul de la butée

    NASA Astrophysics Data System (ADS)

    Magnan, Jean-Pierre; Meyer, Grégory

    2018-05-01

    La mobilisation de la butée devant un écran implique un volume de sol important, sur une distance plus grande que la fiche et qui dépend des paramètres du calcul. L'article passe en revue les méthodes de calcul utilisées pour évaluer la butée, en insistant sur la distance nécessaire au libre développement du mécanisme de butée. Il évalue ensuite de différentes façons l'effet de l'interaction entre deux écrans placés face à face de part et d'autre d'une excavation. La méthode recommandée pour calculer la butée mobilisable consiste à faire un calcul en éléments finis avec des valeurs réduites des paramètres de résistance au cisaillement dans la zone où se développera la butée. Cette démarche permet de déterminer des facteurs correctifs à appliquer au calcul de la butée d'un écran isolé en fonction du rapport de la distance entre écrans à leur fiche.

  14. Interacting disturbances: did sudden oak death mortality in Big Sur worsen the impacts of the 2008 basin complex wildfire?

    Treesearch

    Margaret Metz; Kerri Frangioso; Ross Meentemeyer; David Rizzo

    2010-01-01

    In late June 2008, a large, dry lightning storm ignited thousands of fires across California. The largest of these fires became the Basin-Indians Complex Fire in Big Sur, along the State’s central coast. The fire burned over 240,000 acres (USDA Forest Service 2008) and required over a month of intense firefighting operations to contain the perimeter. Media reports and...

  15. High temperature deformation of NiAl and CoAl

    NASA Technical Reports Server (NTRS)

    Nix, W. D.

    1982-01-01

    The high temperature mechanical properties of the aluminides are reviewed with respect to their potential as high temperature structural materials. It is shown that NiAl and CoAl are substantially stronger than the pure metals Ni and Co at high temperatures and approach the strength of some superalloys, particularly when those superalloys are tested in "weak" directions. The factors that limit and control the high temperature strengths of NiAl and CoAl are examined to provide a basis for the development of intermetallic alloys of this type.

  16. Atomistic Modeling of RuAl and (RuNi) Al Alloys

    NASA Technical Reports Server (NTRS)

    Gargano, Pablo; Mosca, Hugo; Bozzolo, Guillermo; Noebe, Ronald D.; Gray, Hugh R. (Technical Monitor)

    2002-01-01

    Atomistic modeling of RuAl and RuAlNi alloys, using the BFS (Bozzolo-Ferrante-Smith) method for alloys is performed. The lattice parameter and energy of formation of B2 RuAl as a function of stoichiometry and the lattice parameter of (Ru(sub 50-x)Ni(sub x)Al(sub 50)) alloys as a function of Ni concentration are computed. BFS based Monte Carlo simulations indicate that compositions close to Ru25Ni25Al50 are single phase with no obvious evidence of a miscibility gap and separation of the individual B2 phases.

  17. Croissance epitaxiale de GaAs sur substrats de Ge par epitaxie par faisceaux chimiques

    NASA Astrophysics Data System (ADS)

    Belanger, Simon

    La situation energetique et les enjeux environnementaux auxquels la societe est confrontee entrainent un interet grandissant pour la production d'electricite a partir de l'energie solaire. Parmi les technologies actuellement disponibles, la filiere du photovoltaique a concentrateur solaire (CPV pour concentrator photovoltaics) possede un rendement superieur et mi potentiel interessant a condition que ses couts de production soient competitifs. La methode d'epitaxie par faisceaux chimiques (CBE pour chemical beam epitaxy) possede plusieurs caracteristiques qui la rendent interessante pour la production a grande echelle de cellules photovoltaiques a jonctions multiples a base de semi-conducteurs III-V. Ce type de cellule possede la meilleure efficacite atteinte a ce jour et est utilise sur les satellites et les systemes photovoltaiques a concentrateur solaire (CPV) les plus efficaces. Une des principales forces de la technique CBE se trouve dans son potentiel d'efficacite d'utilisation des materiaux source qui est superieur a celui de la technique d'epitaxie qui est couramment utilisee pour la production a grande echelle de ces cellules. Ce memoire de maitrise presente les travaux effectues dans le but d'evaluer le potentiel de la technique CBE pour realiser la croissance de couches de GaAs sur des substrats de Ge. Cette croissance constitue la premiere etape de fabrication de nombreux modeles de cellules solaires a haute performance decrites plus haut. La realisation de ce projet a necessite le developpement d'un procede de preparation de surface pour les substrats de germanium, la realisation de nombreuses sceances de croissance epitaxiale et la caracterisation des materiaux obtenus par microscopie optique, microscopie a force atomique (AFM), diffraction des rayons-X a haute resolution (HRXRD), microscopie electronique a transmission (TEM), photoluminescence a basse temperature (LTPL) et spectrometrie de masse des ions secondaires (SIMS). Les experiences ont permis

  18. Al6H18: A baby crystal of γ-AlH3

    NASA Astrophysics Data System (ADS)

    Kiran, B.; Kandalam, Anil K.; Xu, Jing; Ding, Y. H.; Sierka, M.; Bowen, K. H.; Schnöckel, H.

    2012-10-01

    Using global-minima search methods based on the density functional theory calculations of (AlH3)n (n = 1-8) clusters, we show that the growth pattern of alanes for n ≥ 4 is dominated by structures containing hexa-coordinated Al atoms. This is in contrast to the earlier studies where either linear or ring structures of AlH3 were predicted to be the preferred structures in which the Al atoms can have a maximum of five-fold coordination. Our calculations also reveal that the Al6H18 cluster, with its hexa-coordination of the Al atoms, resembles the unit-cell of γ-AlH3, thus Al6H18 is designated as the "baby crystal." The fragmentation energies of the (AlH3)n (n = 2-8) along with the dimerization energies for even n clusters indicate an enhanced stability of the Al6H18 cluster. Both covalent (hybridization) and ionic (charge) contribution to the bonding are the driving factors in stabilizing the isomers containing hexa-coordinated Al atoms.

  19. Que nous apprennent les petits frères et sœurs sur les signes précoces d’autisme?1

    PubMed Central

    Rogers, Sally J.

    2010-01-01

    L’objectif de cette revue est de présenter une synthèse des réponses que l’on peut actuellement apporter à la question de savoir quelles sont les premières caractéristiques comportementales qui prédisent le développement de l’autisme. L’article se centre sur 5 points : la présence de Troubles du Spectre Autistique (TSA) dans des groupes de frères et sœurs puînés d’enfants déjà diagnostiqués, les patterns et caractéristiques du développement moteur, les patterns et caractéristiques du développement social et émotionnel, les patterns et caractéristiques de la communication intentionnelle verbale et non verbale, et les patterns qui marquent le début de comportements pathognomoniques de TSA. La discussion porte sur les aspects inattendus des résultats et les pistes de recherche nouvelles qu’ils peuvent engendrer. PMID:20890377

  20. Evaluation du niveau de connaissance des patients sur la gestion du traitement par les antis vitamines K dans le service de cardiologie de Ouagadougou

    PubMed Central

    Samadoulougou, André; Temoua Naibe, Dangwé; Mandi, Germain; Yameogo, Relwendé Aristide; Kabore, Elisé; Millogo, Georges; Yameogo, Nobila Valentin; Kologo, Jonas Koudougou; Thiam/Tall, Anna; Toguyeni, Boubacar Jean Yves; Zabsonre, Patrice

    2014-01-01

    Introduction Les antivitamines K (AVK), traitement anticoagulant oral le plus largement prescrit, posent un réel problème de santé publique du fait de leur risque iatrogène. L'objectif de cette étude était de préciser le niveau de connaissance des patients sur la gestion de leur traitement par les AVK. Méthodes Il s'est agi d'une enquête transversale descriptive réalisée au CHU-Yalgado Ouédraogo, sur une période de 03 mois : du 1er mars au 31 mai 2012. Un questionnaire a été administré aux patients bénéficiant d'un traitement AVK depuis au moins un mois. Résultats Soixante-dix patients ont été inclus dans l'étude dont 30 hommes. L'âge moyen était de 49 ans ± 16 ans. Les cardiopathies et la maladie thromboembolique veineuse justifiant l'institution du traitement AVK étaient retrouvées respectivement dans 58,6% et 41,4% des cas. Le nom de l'AVK et la raison exacte du traitement étaient connus respectivement dans 91,4% et 67,1% des cas. Plus de la moitié des patients (68,6%) savaient que les AVK rendaient le sang plus fluide. Quarante-six patients (65,7%) citaient l'INR comme examen biologique de surveillance du traitement et seulement 28 patients (40%) connaissaient les valeurs cibles. La majorité des patients ne connaissait pas les risques encourus en cas de surdosage (72,8%) et de sous-dosage (71,4%). Une automédication par anti-inflammatoire non stéroïdien était signalée par 18 patients (25,7%). Les choux (74,3%) et la laitue (62,9%), aliments à consommer avec modération, étaient les plus cités. Conclusion Les connaissances des patients sur la gestion des AVK étaient fragmentaires et insuffisantes pour assurer la sécurité et l'efficacité du traitement. La création d'un programme d'éducation thérapeutique sur les AVK s'avère alors nécessaire. PMID:25870741

  1. Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

    NASA Astrophysics Data System (ADS)

    Veres, Teodor

    Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques

  2. 27Al MQMAS of the δ-Al 13-Keggin

    DOE PAGES

    Pilgrim, C. D.; Callahan, J. R.; Colla, C. A.; ...

    2017-01-20

    Here, one-dimensional 27Al, 23Na Magic-Angle-Spinning (MAS) NMR and 27Al Multiple-Quantum Magic-Angle-Spinning NMR (MQMAS) measurements are reported for the δ-isomer of the Al 13 Keggin structure at high spinning speed and 14.1 T field. Values for the CQ and η parameters are on the same scale as those seen in other isomers of the Al 13 structure. Density functional theory (DFT) calculations are performed for comparison to the experimental fits using the B3PW91/6-31+G* and PBE0/6-31+G* levels of theory, with the Polarizable Continuum Model (PCM).

  3. Pressure induced coordination change of Al in silicate melts from Al K edge XANES of high pressure NaAlSi2O6-NaAlSi3O8 glasses

    NASA Astrophysics Data System (ADS)

    Li, Dien; Secco, R. A.; Bancroft, G. M.; Fleet, M. E.

    Aluminum K-edge XANES spectra of high pressure and high temperature (4.4 GPa and 1575°C) glasses along the NaAlSi2O6 (Jd)-NaAlSi3O8 (Ab) join are reported using synchrotron radiation, and shown to provide direct experimental evidence for the pressure-induced coordination change of Al. Five- and six-fold coordinated Al (5Al and 6Al), characterized by Al K-edge positions at 1567.8 and 1568.7 eV, respectively, first appear in glass of composition Jd60Ab40 and increase in proportion progressively with increasing Jd content. The end-member jadeite glass contains about 6% of each of 5Al and 6Al. The present direct measurements confirm literature suggestions for the important role of Al in controlling viscosity and diffusion in mantle melts.

  4. Assessing behavioural changes in ALS: cross-validation of ALS-specific measures.

    PubMed

    Pinto-Grau, Marta; Costello, Emmet; O'Connor, Sarah; Elamin, Marwa; Burke, Tom; Heverin, Mark; Pender, Niall; Hardiman, Orla

    2017-07-01

    The Beaumont Behavioural Inventory (BBI) is a behavioural proxy report for the assessment of behavioural changes in ALS. This tool has been validated against the FrSBe, a non-ALS-specific behavioural assessment, and further comparison of the BBI against a disease-specific tool was considered. This study cross-validates the BBI against the ALS-FTD-Q. Sixty ALS patients, 8% also meeting criteria for FTD, were recruited. All patients were evaluated using the BBI and the ALS-FTD-Q, completed by a carer. Correlational analysis was performed to assess construct validity. Precision, sensitivity, specificity, and overall accuracy of the BBI when compared to the ALS-FTD-Q, were obtained. The mean score of the whole sample on the BBI was 11.45 ± 13.06. ALS-FTD patients scored significantly higher than non-demented ALS patients (31.6 ± 14.64, 9.62 ± 11.38; p < 0.0001). A significant large positive correlation between the BBI and the ALS-FTD-Q was observed (r = 0.807, p < 0.0001), and no significant correlations between the BBI and other clinical/demographic characteristics indicate good convergent and discriminant validity, respectively. 72% of overall concordance was observed. Precision, sensitivity, and specificity for the classification of severely impaired patients were adequate. However, lower concordance in the classification of mild behavioural changes was observed, with higher sensitivity using the BBI, most likely secondary to BBI items which endorsed behavioural aspects not measured by the ALS-FTD-Q. Good construct validity has been further confirmed when the BBI is compared to an ALS-specific tool. Furthermore, the BBI is a more comprehensive behavioural assessment for ALS, as it measures the whole behavioural spectrum in this condition.

  5. Doping and compensation in Al-rich AlGaN grown on single crystal AlN and sapphire by MOCVD

    NASA Astrophysics Data System (ADS)

    Bryan, Isaac; Bryan, Zachary; Washiyama, Shun; Reddy, Pramod; Gaddy, Benjamin; Sarkar, Biplab; Breckenridge, M. Hayden; Guo, Qiang; Bobea, Milena; Tweedie, James; Mita, Seiji; Irving, Douglas; Collazo, Ramon; Sitar, Zlatko

    2018-02-01

    In order to understand the influence of dislocations on doping and compensation in Al-rich AlGaN, thin films were grown by metal organic chemical vapor deposition (MOCVD) on different templates on sapphire and low dislocation density single crystalline AlN. AlGaN grown on AlN exhibited the highest conductivity, carrier concentration, and mobility for any doping concentration due to low threading dislocation related compensation and reduced self-compensation. The onset of self-compensation, i.e., the "knee behavior" in conductivity, was found to depend only on the chemical potential of silicon, strongly indicating the cation vacancy complex with Si as the source of self-compensation. However, the magnitude of self-compensation was found to increase with an increase in dislocation density, and consequently, AlGaN grown on AlN substrates demonstrated higher conductivity over the entire doping range.

  6. The Existence of a Designer Al=Al Double Bond in the LiAl2 H4- Cluster Formed by Electronic Transmutation.

    PubMed

    Lundell, Katie A; Zhang, Xinxing; Boldyrev, Alexander I; Bowen, Kit H

    2017-12-22

    The Al=Al double bond is elusive in chemistry. Herein we report the results obtained via combined photoelectron spectroscopy and ab initio studies of the LiAl 2 H 4 - cluster that confirm the formation of a conventional Al=Al double bond. Comprehensive searches for the most stable structures of the LiAl 2 H 4 - cluster have shown that the global minimum isomer I possesses a geometric structure which resembles that of Si 2 H 4 , demonstrating a successful example of the transmutation of Al atoms into Si atoms by electron donation. Theoretical simulations of the photoelectron spectrum discovered the coexistence of two isomers in the ion beam, including the one with the Al=Al double bond. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. L’érysipèle sur cicatrice post opératoire en traumatologie: à propos d'un cas et revue de la littérature

    PubMed Central

    Abid, Hatim; El Idrissi, Mohamed; Shimi, Mohamed; El Ibrahimi, Abdelhalim; El Mrini, Abdelmajid; Amraoui, Nissrine; Mernissi, Fatima Zohra

    2015-01-01

    L’érysipèle sur cicatrice post opératoire est une entité rare, décrite principalement chez des patients présentant les facteurs de risque classiques de la maladie au niveau des sites de veinectomie pour pontage coronarien. En traumatologie orthopédie, nous n'avons que les 3 cas rapportés dans le travail de Dhrif survenus au décours d'une implantation prothétique chez des malades à risque. Nous présentons à travers cet article, le cas d'un érysipèle post opératoire sur une cicatrice d'ostéosynthèse d'une fracture fermée du pilon tibial, ayant la particularité du terrain et des circonstances de survenues, pour enfin conclure aux principes de la prévention primaire à adopter. PMID:26401204

  8. Lou Gehrig's Disease (ALS)

    MedlinePlus

    ... for Educators Search English Español Lou Gehrig's Disease (ALS) KidsHealth / For Kids / Lou Gehrig's Disease (ALS) What's ... with ALS in the 1930s. What Happens in ALS? ALS damages motor neurons in the brain and ...

  9. Characterization of N-polar AlN in GaN/AlN/(Al,Ga)N heterostructures grown by metal-organic chemical vapor deposition

    NASA Astrophysics Data System (ADS)

    Li, Haoran; Mazumder, Baishakhi; Bonef, Bastien; Keller, Stacia; Wienecke, Steven; Speck, James S.; Denbaars, Steven P.; Mishra, Umesh K.

    2017-11-01

    In GaN/(Al,Ga)N high-electron-mobility transistors (HEMT), AlN interlayer between GaN channel and AlGaN barrier suppresses alloy scattering and significantly improves the electron mobility of the two-dimensional electron gas. While high concentrations of gallium were previously observed in Al-polar AlN interlayers grown by metal-organic chemical vapor deposition, the N-polar AlN (Al x Ga1-x N) films examined by atom probe tomography in this study exhibited aluminum compositions (x) equal to or higher than 95% over a wide range of growth conditions. The also investigated AlN interlayer in a N-polar GaN/AlN/AlGaN/ S.I. GaN HEMT structure possessed a similarly high x content.

  10. Pure AlN layers in metal-polar AlGaN/AlN/GaN and AlN/GaN heterostructures grown by low-temperature ammonia-based molecular beam epitaxy

    NASA Astrophysics Data System (ADS)

    Kaun, Stephen W.; Mazumder, Baishakhi; Fireman, Micha N.; Kyle, Erin C. H.; Mishra, Umesh K.; Speck, James S.

    2015-05-01

    When grown at a high temperature (820 °C) by ammonia-based molecular beam epitaxy (NH3-MBE), the AlN layers of metal-polar AlGaN/AlN/GaN heterostructures had a high GaN mole fraction (∼0.15), as identified by atom probe tomography in a previous study (Mazumder et al 2013 Appl. Phys. Lett. 102 111603). In the study presented here, growth at low temperature (<740 °C) by NH3-MBE yielded metal-polar AlN layers that were essentially pure at the alloy level. The improved purity of the AlN layers grown at low temperature was correlated to a dramatic increase in the sheet density of the two-dimensional electron gas (2DEG) at the AlN/GaN heterointerface. Through application of an In surfactant, metal-polar AlN(3.5 nm)/GaN and AlGaN/AlN(2.5 nm)/GaN heterostructures grown at low temperature yielded low 2DEG sheet resistances of 177 and 285 Ω/□, respectively.

  11. Interdiffusion in U 3Si-Al, U 3Si 2-Al, and USi-Al dispersion fuels during irradiation

    NASA Astrophysics Data System (ADS)

    Kim, Yeon Soo; Hofman, Gerard L.

    2011-03-01

    Uranium-silicide compound fuel dispersion in an Al matrix is used in research and test reactors worldwide. Interaction layer (IL) growth between fuel particles and the matrix is one of performance issues. The interaction layer growth data for U 3Si, U 3Si 2 and USi dispersions in Al were obtained from both out-of-pile and in-pile tests. The IL is dominantly U(AlSi) 3 from out-of-pile tests, but its (Al + Si)/U ratio from in-pile tests is higher than the out-of-pile data, because of amorphous behavior of the ILs. IL growth correlations were developed for U 3Si-Al and U 3Si 2-Al. The IL growth rates were dependent on the U/Si ratio of the fuel compounds. During irradiation, however, the IL growth rates did not decrease with the decreasing U/Si ratio by fission. It is reasoned that transition metal fission products in the IL compensate the loss of U atoms by providing chemical potential for Al diffusion and volume expansion by solid swelling and gas bubble swelling. The addition of Mo in U 3Si 2 reduces the IL growth rate, which is similar to that of UMo alloy dispersion in a silicon-added Al matrix.

  12. Growing Wildfire Near Big Sur, California Imaged by NASA Terra Spacecraft

    NASA Image and Video Library

    2016-08-09

    The Soberanes fire, in Central California near Big Sur, had grown to more than 67,000 acres when the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument on NASA's Terra spacecraft captured this image on Aug. 6, 2016. More than 4,800 personnel are battling the blaze, which is now 50 percent contained. The fire has destroyed 57 homes and 11 outbuildings and caused one fatality. Evacuation orders are still in effect for a number of nearby communities. The fire was caused by an illegal unattended campfire. Vegetation is depicted in red colors; burned areas are dark grey; clouds are white; smoke and ash are light grey. Yellow indicates active fires, detected on ASTER's thermal infrared channels. The image covers an area of 19 by 26 miles (30 by 42 kilometers), and is located at 36.4 degrees north, 121.8 degrees west. http://photojournal.jpl.nasa.gov/catalog/PIA20725

  13. ALS - resources

    MedlinePlus

    Resources - ALS ... The following organizations are good resources for information on amyotrophic lateral sclerosis : Muscular Dystrophy Association -- www.mda.org/disease/amyotrophic-lateral-sclerosis National Amyotrophic Lateral Sclerosis (ALS) ...

  14. Study of the Al m 26 ( d , p ) Al 27 Reaction and the Influence of the Al 26 0 + Isomer on the Destruction of Al 26 in the Galaxy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Almaraz-Calderon, S.; Rehm, K. E.; Gerken, N.

    The existence of 26Al (t 1/2 = 7.17 × 10 5 yr) in the interstellar medium provides a direct confirmation of ongoing nucleosynthesis in the Galaxy. The presence of a low-lying 0 + isomer ( 26Al m), however, severely complicates the astrophysical calculations. Here we present for the first time a study of the 26Al m (d, p) 27 Al reaction using an isomeric 26Al beam. The selectivity of this reaction allowed the study of ℓ = 0 transfers to T = 1/2, and T = 3/2 states in 27Al . Mirror symmetry arguments were then used to constrain themore » 26Al m (p,γ) 27Si reaction rate and provide an experimentally determined upper limit of the rate for the destruction of isomeric 26Al via radiative proton capture reactions, which is expected to dominate the destruction path of 26Al m in asymptotic giant branch stars, classical novae, and core collapse supernovae.« less

  15. Study of the Al m 26 ( d , p ) Al 27 Reaction and the Influence of the Al 26 0 + Isomer on the Destruction of Al 26 in the Galaxy

    DOE PAGES

    Almaraz-Calderon, S.; Rehm, K. E.; Gerken, N.; ...

    2017-08-17

    The existence of 26Al (t 1/2 = 7.17 × 10 5 yr) in the interstellar medium provides a direct confirmation of ongoing nucleosynthesis in the Galaxy. The presence of a low-lying 0 + isomer ( 26Al m), however, severely complicates the astrophysical calculations. Here we present for the first time a study of the 26Al m (d, p) 27 Al reaction using an isomeric 26Al beam. The selectivity of this reaction allowed the study of ℓ = 0 transfers to T = 1/2, and T = 3/2 states in 27Al . Mirror symmetry arguments were then used to constrain themore » 26Al m (p,γ) 27Si reaction rate and provide an experimentally determined upper limit of the rate for the destruction of isomeric 26Al via radiative proton capture reactions, which is expected to dominate the destruction path of 26Al m in asymptotic giant branch stars, classical novae, and core collapse supernovae.« less

  16. Study of the ^{26}Al^{m}(d,p)^{27}Al Reaction and the Influence of the ^{26}Al 0^{+} Isomer on the Destruction of ^{26}Al in the Galaxy.

    PubMed

    Almaraz-Calderon, S; Rehm, K E; Gerken, N; Avila, M L; Kay, B P; Talwar, R; Ayangeakaa, A D; Bottoni, S; Chen, A A; Deibel, C M; Dickerson, C; Hanselman, K; Hoffman, C R; Jiang, C L; Kuvin, S A; Nusair, O; Pardo, R C; Santiago-Gonzalez, D; Sethi, J; Ugalde, C

    2017-08-18

    The existence of ^{26}Al (t_{1/2}=7.17×10^{5}  yr) in the interstellar medium provides a direct confirmation of ongoing nucleosynthesis in the Galaxy. The presence of a low-lying 0^{+} isomer (^{26}Al^{m}), however, severely complicates the astrophysical calculations. We present for the first time a study of the ^{26}Al^{m}(d,p)^{27}Al reaction using an isomeric ^{26}Al beam. The selectivity of this reaction allowed the study of ℓ=0 transfers to T=1/2, and T=3/2 states in ^{27}Al. Mirror symmetry arguments were then used to constrain the ^{26}Al^{m}(p,γ)^{27}Si reaction rate and provide an experimentally determined upper limit of the rate for the destruction of isomeric ^{26}Al via radiative proton capture reactions, which is expected to dominate the destruction path of ^{26}Al^{m} in asymptotic giant branch stars, classical novae, and core collapse supernovae.

  17. Early Miocene shortening in the lower Comondú Group in Baja California Sur (México)

    NASA Astrophysics Data System (ADS)

    Bonini, Marco; Cerca, Mariano; Moratti, Giovanna; López-Martínez, Margarita; Corti, Giacomo; Gracia-Marroquín, Diego

    2017-11-01

    The Late Oligocene-Early Miocene volcaniclastic deposits of Baja California Sur form most of the exposed western margin of the Gulf of California rift. In some places these deposits, collectively referred to as Comondú Group, show complex deformation patterns given by the coexistence of tectonic and gravitational features. The area north of La Paz is characterized by the occurrence of several slump bodies, which are displaced by normal faults connected with the rift opening. In some places we have identified 100's m scale thrust-related folds and reverse faults that we have interpreted as shortening features. The latter displace the slump layers and are offset by the normal faults. If confirmed, this would represent the first report of a shortening event in the Early Miocene volcaniclastic deposits of Baja California Sur. The observed shortening has modest magnitude (ca 3-5% bulk shortening), and has been detected in a sector extending over 100 km north from La Paz. New 40Ar-39*Ar ages, integrated with existing radiometric age datasets, constrain the timing of this shortening episode. The rocks affected by shortening have ages between 24 and 21 Ma, and are capped by undeformed volcanic rocks with ages spanning between 19.4 and 17.2 Ma. These relationships define an intra-Early Miocene unconformity, which we interpret to be related to the shortening deformation. The available timing constraints allow us to infer that a main ENE-to-ESE-trending shortening was short-lived, possibly ca. 19.4-21 Ma. The account of this shortening event may shed some light on the complex subduction and microplate processes that preceded the continental rifting of the Gulf of California.

  18. Mise à jour sur la vaccination contre la méningococcie invasive chez les enfants et les adolescents canadiens.

    PubMed

    Robinson, Joan L

    2018-02-01

    La méningococcie invasive (MI) est une maladie grave qui est souvent à l'origine d'un sepsis fulminant ou d'une méningite. Au Canada, elle est surtout attribuable aux sérogroupes B et C. Des programmes de vaccination systématique contre le méningocoque du sérogroupe C sont prévus à l'âge de 12 mois, et dans certaines régions sociosanitaires, le calendrier comprend l'administration de doses supplémentaires aux enfants plus jeunes. Les adolescents reçoivent systématiquement une dose de rappel du vaccin contre le sérogroupe C ou d'un vaccin quadrivalent (sérogroupes A, C, W et Y). L'utilisation systématique des vaccins contre le sérogroupe B n'est pas recommandée tant qu'on n'aura pas recueilli de données supplémentaires sur l'efficacité des vaccins sur le marché et la durée de la protection qu'ils confèrent. Cependant, les enfants d'au moins deux mois qui courent un risque accru de MI devraient être vaccinés contre les sérogroupes B et C dans les plus brefs délais.

  19. Reduced electron back-injection in Al2O3/AlOx/Al2O3/graphene charge-trap memory devices

    NASA Astrophysics Data System (ADS)

    Lee, Sejoon; Song, Emil B.; Min Kim, Sung; Lee, Youngmin; Seo, David H.; Seo, Sunae; Wang, Kang L.

    2012-12-01

    A graphene charge-trap memory is devised using a single-layer graphene channel with an Al2O3/AlOx/Al2O3 oxide stack, where the ion-bombarded AlOx layer is intentionally added to create an abundance of charge-trap sites. The low dielectric constant of AlOx compared to Al2O3 reduces the potential drop in the control oxide Al2O3 and suppresses the electron back-injection from the gate to the charge-storage layer, allowing the memory window of the device to be further extended. This shows that the usage of a lower dielectric constant in the charge-storage layer compared to that of the control oxide layer improves the memory performance for graphene charge-trap memories.

  20. Fires Burning near Big Sur, California

    NASA Technical Reports Server (NTRS)

    2008-01-01

    Fires near Big Sur, Calif., continued to burn unchecked when the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument on NASA's Terra satellite captured this image on Sunday, June 29. In Northern California alone, fires have consumed more than 346,000 acres.At least 18,000 people have deployed to attempt to extinguish or control the flames. Air quality as far away as San Francisco has been adversely impacted by the dense clouds of smoke and ash blowing towards the northwest. The satellite image combines a natural color portrayal of the landscape with thermal infrared data showing the active burning areas in red. The dark area in the lower right is a previous forest fire.

    ASTER is one of five Earth-observing instruments launched December 18, 1999, on NASA's Terra satellite. The instrument was built by Japan's Ministry of Economy, Trade and Industry. A joint U.S./Japan science team is responsible for validation and calibration of the instrument and the data products.

    The broad spectral coverage and high spectral resolution of ASTER provides scientists in numerous disciplines with critical information for surface mapping, and monitoring of dynamic conditions and temporal change. Example applications are: monitoring glacial advances and retreats; monitoring potentially active volcanoes; identifying crop stress; determining cloud morphology and physical properties; wetlands evaluation; thermal pollution monitoring; coral reef degradation; surface temperature mapping of soils and geology; and measuring surface heat balance.

    The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

    Size: 35.4 by 57 kilometers (21.9 by 34.2 miles) Location: 36.1 degrees North latitude, 121.6 degrees West longitude Orientation: North at top Image Data: ASTER bands 3, 2, and 1 Original Data Resolution: 15 meters (49 feet) Dates Acquired: June 29

  1. Traumatismes Oculaires par Petards: Bilan sur Trois Annees

    PubMed Central

    Zouaoui-Kesraoui, N.; Derdour, A.

    2009-01-01

    Summary Les accidents dus aux pétards sont des accidents graves. Leur recrudescence ces dernières années en Algérie, essentiellement durant les fêtes du Mawlid Ennabaoui (fête de la naissance du prophète), mérite à notre sens d'entreprendre des bilans exhaustifs dont celui-ci dans le but d'une sensibilisation de toutes les compétences concernées. Nous avons réuni sur trois années consécutives (2002, 2003, 2004) 60 dossiers de malades ayant subi des accidents oculaires par pétards. Nos patients sont répartis en 42 consultations pour blessures légères et 18 hospitalisations pour blessures graves. Parmi ces derniers, neuf ont présenté des complications et séquelles graves (cinq cas de cécité par atrophie du globe oculaire, trois cas de cécité cornéenne et un cas de cécité par trou maculaire). Dans tous ces cas l'incapacité permanente partielle est au minimum de 30%. Au vu de ces données nous proposons des mesures d'éducation sanitaire et une sensibilisation du grand public aux traumatismes oculaires, par le biais de mé dias appropriés: radio, télévision, affiches. PMID:21991157

  2. 77 FR 73732 - In the Matter of Amendment of the Designation of al-Qa'ida in Iraq, aka Jam'at al Tawhid wa'al...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-11

    ...'ida in Iraq, aka Jam'at al Tawhid wa'al-Jihad, aka The Monotheism and Jihad Group, aka The al-Zarqawi Network, aka al-Tawhid, aka Tanzim Qa`idat al-Jihad fi Bilad al-Rafidayn, aka The Organization of al-Jihad... Rivers, aka al-Qaida of Jihad Organization in the Land of the Two Rivers, aka al- Qaida Group of Jihad in...

  3. Phenotypic and genotypic studies of ALS cases in ALS-SMA families.

    PubMed

    Corcia, Philippe; Vourc'h, Patrick; Blasco, Helene; Couratier, Philippe; Dangoumau, Audrey; Bellance, Remi; Desnuelle, Claude; Viader, Fausto; Pautot, Vivien; Millecamps, Stephanie; Bakkouche, Salah; Salachas, FranÇois; Andres, Christian R; Meininger, Vincent; Camu, William

    2018-08-01

    Amyotrophic lateral sclerosis (ALS) and spinal muscular atrophy (SMA) are the most frequent motor neuron disorders in adulthood and infancy, respectively. There is a growing literature supporting common pathophysiological patterns between those disorders. One important clinical issue for that is the co-occurrence of both diseases within a family. To collect families in which ALS and SMA patients co-exist and describe the phenotype and the genotype of ALS patients. Nine families with co-occurrence of SMA and ALS have been gathered over the last 15 years. Epidemiological, phenotype and genetic status were collected. Out of the nine families, six corresponded to the criteria of familial ALS (FALS). Clinical data were available for 11 patients out of the 15 ALS cases. Mean age of onset was 58.5 years, site of onset was lower limbs in nine cases (81.8%), median duration was 22 months. Four ALS patients carried a mutation: three mutations in SOD1 gene (G147N in two cases and one with E121G) and one repeat expansion in the C9ORF72 gene. Three patients had abnormal SMN1 copy numbers. While the high proportion of familial history of ALS cases in these ALS-SMA pedigrees could have suggested that these familial clusters of the two most frequent MND rely on a genetic background, we failed to exclude that this occurred by chance.

  4. Validation materielle d'une architecture generique de reseaux avioniques basee sur une gestion modulaire de la redondance

    NASA Astrophysics Data System (ADS)

    Tremblay, Jose-Philippe

    Les systemes avioniques ne cessent d'evoluer depuis l'apparition des technologies numeriques au tournant des annees 60. Apres le passage par plusieurs paradigmes de developpement, ces systemes suivent maintenant l'approche " Integrated Modular Avionics " (IMA) depuis le debut des annees 2000. Contrairement aux methodes anterieures, cette approche est basee sur une conception modulaire, un partage de ressources generiques entre plusieurs systemes et l'utilisation plus poussee de bus multiplexes. La plupart des concepts utilises par l'architecture IMA, bien que deja connus dans le domaine de l'informatique distribuee, constituent un changement marque par rapport aux modeles anterieurs dans le monde avionique. Ceux-ci viennent s'ajouter aux contraintes importantes de l'avionique classique telles que le determinisme, le temps reel, la certification et les cibles elevees de fiabilite. L'adoption de l'approche IMA a declenche une revision de plusieurs aspects de la conception, de la certification et de l'implementation d'un systeme IMA afin d'en tirer profit. Cette revision, ralentie par les contraintes avioniques, est toujours en cours, et offre encore l'opportunite de developpement de nouveaux outils, methodes et modeles a tous les niveaux du processus d'implementation d?un systeme IMA. Dans un contexte de proposition et de validation d'une nouvelle architecture IMA pour un reseau generique de capteurs a bord d?un avion, nous avons identifie quelques aspects des differentes approches traditionnelles pour la realisation de ce type d?architecture pouvant etre ameliores. Afin de remedier a certaines des differentes lacunes identifiees, nous avons propose une approche de validation basee sur une plateforme materielle reconfigurable ainsi qu'une nouvelle approche de gestion de la redondance pour l'atteinte des cibles de fiabilite. Contrairement aux outils statiques plus limites satisfaisant les besoins pour la conception d'une architecture federee, notre approche de

  5. Distribution and size of lava shields on the Al Haruj al Aswad and the Al Haruj al Abyad Volcanic Systems, Central Libya

    NASA Astrophysics Data System (ADS)

    Elshaafi, Abdelsalam; Gudmundsson, Agust

    2017-05-01

    The Al Haruj Volcanic Province (AHVP) consists of two distinct volcanic systems. In the north is the system of Al Haruj al Aswad, covering an area of 34,200 km2, while in the south the system of Al Haruj al Abyad, covering an area of 7,850 km2. The systems have produced some 432 monogenetic volcanoes, primarily scoria (cinder) cones, lava shields, and maars. The density distribution of the volcanoes in each system, plotted as eruption points or sites, has a roughly elliptical surface expression, suggesting similar plan-view geometry of the magma sources, here suggested as deep-seated reservoirs. More specifically, the Al Haruj al Aswad magma reservoir has major and minor axes of 210 km and 119 km, respectively, and an area of 19,176 km2, the corresponding figures for the Haruj al Abyad reservoir being 108 km and 74 km, for the axes, and 6209 km2 for the area. We measured 55 lava shields on the AHVP. They are mostly restricted to the northern and southern parts of AHVP and date from late Miocene to (at least) the end of Pleistocene, while some may have been active into Holocene. In fact, although primarily monogenetic, some of the lava shields show evidence of (possibly Holocene) fissure eruptions in the summit parts. The early lava shields tend to be located at the edges of volcanic systems and with greater volumes than later (more central) shields. The average lava shield basal diameter is 4.5 km and height 63 m. There is strong linear correlation between lava shield volume and basal area, the coefficient of determination (R2) being about 0.75. When 22 Holocene Icelandic lava shields are added to the dataset, for comparison, the correlation between volume and basal area becomes R2 = 0.95. Numerical models suggest that the local stress fields favoured rupture and dyke injection at the margins of the source reservoirs during late Miocene - early Pliocene, in agreement with the distribution of the early, large-volume shields.

  6. Formation of gamma'-Ni3Al via the Peritectoid Reaction: gamma plus beta (+Al2O3) equals gamma'(+Al2O3)

    NASA Technical Reports Server (NTRS)

    Copland, Evan

    2008-01-01

    The activities of Al and Ni were measured using multi-cell Knudsen effusion-cell mass spectrometry (multi-cell KEMS), over the composition range 8 - 32 at.%Al and temperature range T = 1400 - 1750 K in the Ni-Al-O system. These measurements establish that equilibrium solidification of gamma'-Ni3Al-containing alloys occurs by the eutectic reaction, L (+ Al2O3) = gamma + beta (+ Al2O3), at 1640 plus or minus 1 K and a liquid composition of 24.8 plus or minus 0.2 at.%Al (at an unknown oxygen content). The {gamma + beta + Al2O3} phase field is stable over the temperature range 1633 - 1640 K, and gamma'-Ni3Al forms via the peritectiod, gamma + beta (+ Al2O3) = gamma'(+ Al2O3), at 1633 plus or minus 1 K. This behavior is inconsistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma'-Ni3Al phase field.

  7. Experiential environmental learning: A case study of innovative pedagogy in Baja Sur, Mexico

    NASA Astrophysics Data System (ADS)

    Schneller, Andrew Jon

    This mixed methods case study describes an innovative two-semester middle school environmental learning course that departs from traditional Mexican expository pedagogy through the incorporation of experiential and service learning. This research takes place in a small middle school in Pescadero, Baja California Sur, Mexico. The research approach utilized in the study adds to the handful of studies in this cross-disciplinary field by employing quantitative methodologies to measure course outcomes on student environmental knowledge, perceptions, and actions, while simultaneously qualitatively describing the behavioral, educational, environmental, and social experiences of students. This research employs Dewey's theories of experience---as well as those of more contemporary authenticity theorists---in order to identify the philosophies that advocate incorporating experiential pedagogy within the curriculum. Implications for Mexican educational policy, practical pedagogical applications, and theory are discussed.

  8. Map showing coastal cliff retreat rates along the Big Sur coast, Monterey and San Luis Obispo Counties, California

    USGS Publications Warehouse

    Hapke, Cheryl J.; Green, Krystal R.

    2004-01-01

    The average coastal cliff retreat rate along the Big Sur coast is 18 ? 6 cm/yr as measured over a 52-year time period. The erosion reference features measured as the cliff edge include the well-defined cliff edges common to marine terraces, slight breaks in the slope defining the upper edge of the active lower slope, and the road grade. Cliff erosion and retreat are focused in isolated erosion hotspots that account for most of the calculated average retreat.

  9. Directional Solidification and Mechanical Properties of NiAl-NiAlTa Alloys

    NASA Technical Reports Server (NTRS)

    Johnson, D. R.; Chen, X. F.; Oliver, B. F.; Noebe, R. D.; Whittenberger, J. D.

    1995-01-01

    Directional solidification of eutectic alloys is a promising technique for producing in-situ composite materials exhibiting a balance of properties. Consequently, the microstructure, creep strength and fracture toughness of directionally solidified NiAl-NiAlTa alloys were investigated. Directional solidification was performed by containerless processing techniques to minimize alloy contamination. The eutectic composition was found to be NiAl-15.5 at% Ta and well-aligned microstructures were produced at this composition. A near-eutectic alloy of NiAl-14.5Ta was also investigated. Directional solidification of the near-eutectic composition resulted in microstructures consisting of NiAl dendrites surrounded by aligned eutectic regions. The off-eutectic alloy exhibited promising compressive creep strengths compared to other NiAl-based intermetallics, while preliminary testing indicated that the eutectic alloy was competitive with Ni-base single crystal superalloys. The room temperature toughness of these two-phase alloys was similar to that of polycrystalline NiAl even with the presence of the brittle Laves phase NiAlTa.

  10. Etude de l'influence de la temperature et de l'humidite sur les proprietes mecaniques en traction des fibres de chanvre et de coco

    NASA Astrophysics Data System (ADS)

    Ho Thi, Thu Nga

    L'objectif de cette etude fut d'etablir l'effet de l'humidite et de la temperature sur la resistance en traction et le module elastique des fibres de chanvre et de coco. Deux etudes ont ete realisees afin d'atteindre cet objectif. La premiere vise l'absorption de l'humidite dans ces fibres en exposition dans l'air (de 0%RH a 80%RH) ainsi que l'absorption de l'eau dans ces fibres immergees dans l'eau aux differentes temperatures. La deuxieme consiste a mesurer la resistance en traction et le module elastique de ces fibres sous differentes conditions d'humidite et de temperature. En basant sur les resultats experimentaux obtenus, les methodes semi empiriques et de reseaux de neurones ont ete utilisees pour but de predire les proprietes en traction (resistance et module d'elasticite) des fibres de chanvre et de coco sous l'influence de l'humidite et de la temperature.

  11. Theory and X-ray Absorption Spectroscopy for Aluminum Coordination Complexes – Al K-Edge Studies of Charge and Bonding in (BDI)Al, (BDI)AlR2, and (BDI)AlX2 Complexes.

    PubMed

    Altman, Alison B; Pemmaraju, C D; Camp, Clément; Arnold, John; Minasian, Stefan G; Prendergast, David; Shuh, David K; Tyliszczak, Tolek

    2015-08-19

    Polarized aluminum K-edge X-ray absorption near edge structure (XANES) spectroscopy and first-principles calculations were used to probe electronic structure in a series of (BDI)Al, (BDI)AlX2, and (BDI)AlR2 coordination compounds (X = F, Cl, I; R = H, Me; BDI = 2,6-diisopropylphenyl-β-diketiminate). Spectral interpretations were guided by examination of the calculated transition energies and polarization-dependent oscillator strengths, which agreed well with the XANES spectroscopy measurements. Pre-edge features were assigned to transitions associated with the Al 3p orbitals involved in metal-ligand bonding. Qualitative trends in Al 1s core energy and valence orbital occupation were established through a systematic comparison of excited states derived from Al 3p orbitals with similar symmetries in a molecular orbital framework. These trends suggested that the higher transition energies observed for (BDI)AlX2 systems with more electronegative X(1-) ligands could be ascribed to a decrease in electron density around the aluminum atom, which causes an increase in the attractive potential of the Al nucleus and concomitant increase in the binding energy of the Al 1s core orbitals. For (BDI)Al and (BDI)AlH2 the experimental Al K-edge XANES spectra and spectra calculated using the eXcited electron and Core-Hole (XCH) approach had nearly identical energies for transitions to final state orbitals of similar composition and symmetry. These results implied that the charge distributions about the aluminum atoms in (BDI)Al and (BDI)AlH2 are similar relative to the (BDI)AlX2 and (BDI)AlMe2 compounds, despite having different formal oxidation states of +1 and +3, respectively. However, (BDI)Al was unique in that it exhibited a low-energy feature that was attributed to transitions into a low-lying p-orbital of b1 symmetry that is localized on Al and orthogonal to the (BDI)Al plane. The presence of this low-energy unoccupied molecular orbital on electron-rich (BDI)Al distinguishes

  12. Development of Al2O3 fiber-reinforced Al2O3-based ceramics.

    PubMed

    Tanimoto, Yasuhiro; Nemoto, Kimiya

    2004-09-01

    The purpose of this study was to use a tape casting technique to develop an Al2O3 fiber-reinforced Al2O3-based ceramic material (Al2O3-fiber/Al2O3 composite) into a new type of dental ceramic. The Al2O3-based ceramic used a matrix consisting of 60 wt% Al2O3 powder and 40 wt% SiO2-B2O3 powder. The prepreg sheets of Al2O3-fiber/Al2O3 composite (in which uniaxially aligned Al2O3 fibers were infiltrated with the Al2O3-based matrix) were fabricated continuously using tape casting technique with a doctor blade system. Multilayer preforms of Al2O3-fiber/Al2O3 composite sheets were then sintered at a maximum temperature of 1000 degrees C under an atmospheric pressure in a furnace. The results showed that the shrinkage and bending properties of Al2O3-fiber/Al2O3 composite exceeded those of unreinforced Al2O3--hence demonstrating the positive effects of fiber reinforcement. In conclusion, the tape casting technique has been utilized to successfully develop a new type of dental ceramic material.

  13. NiAl-base composite containing high volume fraction of AlN for advanced engines

    NASA Technical Reports Server (NTRS)

    Hebsur, Mohan (Inventor); Whittenbeger, John D. (Inventor); Lowell, Carl F. (Inventor)

    1994-01-01

    A particulate reinforced NiAl-AlN composite alloy has a NiAl matrix and greater than about 13 volume percent fine particles of AlN within the matrix. The particles preferably have a diameter from about 15 nanometers to about 50 nanometers. The particulate reinforced NiAl-AlN composite alloy may be prepared by cryomilling prealloyed NiAl in liquid nitrogen using grinding media having a diameter of from about 2 to 6 mm at an impeller speed of from about 450 RPM to about 800 RPM. The cryomilling may be done for a duration of from about 4 hours to about 20 hours to obtain a cryomilled powder. The cryomilled powder may be consolidated to form the particulate reinforced NiAl-AlN composite alloy. The particulate reinforced alloy can further include a toughening alloy. The toughening alloy may include NiCrAlY, FeCrAlY, and FeAl.

  14. Molecular dynamics study of Al and Ni 3Al sputtering by Al clusters bombardment

    NASA Astrophysics Data System (ADS)

    Zhurkin, Eugeni E.; Kolesnikov, Anton S.

    2002-06-01

    The sputtering of Al and Ni 3Al (1 0 0) surfaces induced by impact of Al ions and Al N clusters ( N=2,4,6,9,13,55) with energies of 100 and 500 eV/atom is studied at atomic scale by means of classical molecular dynamics (MD). The MD code we used implements many-body tight binding potential splined to ZBL at short distances. Special attention has been paid to model dense cascades: we used quite big computation cells with lateral periodic and damped boundary conditions. In addition, long simulation times (10-25 ps) and representative statistics (up to 1000 runs per each case) were considered. The total sputtering yields, energy and time spectrums of sputtered particles, as well as preferential sputtering of compound target were analyzed, both in the linear and non-linear regimes. The significant "cluster enhancement" of sputtering yield was found for cluster sizes N⩾13. In parallel, we estimated collision cascade features depending on cluster size in order to interpret the nature of observed non-linear effects.

  15. Nb/Al-AlOx/Nb Edge Junctions for Distributed Mixers

    NASA Astrophysics Data System (ADS)

    Amos, R. S.; Lichtenberger, A. W.; Tong, C. E.; Blundell, R.; Pan, S.-K.; Kerr, A. R.

    We have fabricated high quality Nb/Al-oxide/Al/Nb edge junctions using a Nb/SiO/sub 2/ bi-layer film as the base electrode, suitable for use as traveling wave mixers. An edge is cut in the bi-layer with an ion gun at a 45 degree angle using a photoresist mask. The wafer is then cleaned in-situ with a physical ion gun clean followed by the deposition of a thin Al (a1) film, which is then thermally oxidized, an optional second Al (a2) layer, and a Nb counter electrode. It was found that devices with an a2 layer resulted in superior electrical characteristics, though proximity effects increased strongly with a2 thickness. The counter electrode is defined with an SF/sub 6/+N/sub 2/ reactive ion etch, using the Al barrier layer as an etch stop. The Al barrier layer is then either removed with an Al wet etch to isolate the individual devices, or the devices are separated with an anodization process. Various ion gun cleaning conditions have been examined; in addition, both wet and plasma etch bi-layer edge surface pre-treatments were investigated. It was found that edge junctions with large widths (i.e., those more suitable for traveling wave mixers) typically benefited more from such treatments. Initial receiver results at 260 GHz have yielded a DSB noise temperature of 60 K.

  16. Photoelectrical, photophysical and photocatalytic properties of Al based MOFs: MIL-53(Al) and MIL-53-NH{sub 2}(Al)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    An, Yang; Li, Huiliang; Liu, Yuanyuan, E-mail: yyliu@sdu.edu.cn

    Two Al based MOFs (MIL-53(Al) and MIL-53-NH{sub 2} (Al)) were synthesized, and their photoelectrical, photophysical and photocatalytic properties towards oxygen evolution from water were investigated. Different from the ligand to metal charge transfer process previously reported, we proposes a new photocatalytic mechanism based on electron tunneling according to the results of theoretical calculation, steady state and time resolved fluorescence spectra. The organic linkers absorb photons, giving rise to electrons and holes. Then, the photogenerated electrons tunnel through the AlO{sub 6}-octahedra, which not only inhibit the recombination of photogenerated charge carriers, but also is a key factor to the photocatalytic activitymore » of Al based MOFs. - Graphical abstract: The photoelectrical, photophysical and photocatalytic properties towards oxygen evolution from water of two Al based MOFs were investigated. A new photocatalytic mechanism was proposed based on electron tunneling according to the results of both theoretical calculation and steady state, time resolved fluorescence spectra. The electron tunneling process not only inhibit the recombination of photogenerated charge carriers, but also is a key factor to the photocatalytic activity of Al based MOFs.« less

  17. Oxidation of Al2O3 continuous fiber-reinforced/NiAl composites

    NASA Technical Reports Server (NTRS)

    Doychak, J.; Nesbitt, J. A.; Noebe, R. D.; Bowman, R. R.

    1992-01-01

    The 1200 C and 1300 C isothermal and cyclic oxidation behavior of Al2O3 continuous fiber-reinforced/NiAl composites were studied. Oxidation resulted in formation of Al2O3 external scales in a similar manner as scales formed on monolithic NiAl. The isothermal oxidation of an Al2O3/NiAl composite resulted in oxidation of the matrix along the fiber/matrix interface near the fiber ends. This oxide acted as a wedge between the fiber and the matrix, and, under cyclic oxidation conditions, led to further oxidation along the fiber lengths and eventual cracking of the composite. The oxidation behavior of composites in which the Al2O3 fibers were sputter coated with nickel prior to processing was much more severe. This was attributed to open channels around the fibers which formed during processing, most likely as a result of the diffusion of the nickel coating into the matrix.

  18. Structure of oxides prepared by decomposition of layered double Mg–Al and Ni–Al hydroxides

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cherepanova, Svetlana V.; Novosibirsk State University, Novosibirsk; Leont’eva, Natalya N., E-mail: n_n_leonteva@list.ru

    2015-05-15

    Abstracts: Thermal decomposition of Mg–Al and Ni–Al layered double hydroxides LDH at temperatures lower than 800 °C leads to the formation of oxides with different structures. Mg–Al oxide has a very defective structure and consists of octahedral layers as in periclase MgO and mixed octahedral–tetrahedral layers as in spinel MgAl{sub 2}O{sub 4}. Mixed Ni–Al oxide has a sandwich-like structure, consisting of a core with Al-doped NiO-like structure and some surface layers with spinel NiAl{sub 2}O{sub 4} structure epitaxial connected with the core. Suggested models were verified by simulation of X-ray diffraction patterns using DIFFaX code, as well as HRTEM, IR-,more » UV-spectroscopies, and XPS. - Graphical abstract: In the Mg–Al layered double hydroxide Al{sup 3+} ions migrate into interlayers during decomposition. The Mg–Al oxide represents sequence of octahedral and octahedral–tetrahedral spinel layers with vacancies. The Ni–Al oxide has a sandwich-like structure with NiO-like core and surface spinel layers as a result of migration of Al{sup 3+} ions on the surface. The models explain the presence and absence of “memory effect” for the Mg–Al and Ni–Al oxides, respectively. - Highlights: • We study products of Mg(Ni)–Al LDH decomposition by calcination at 500(400)–800 °C. • In Mg–Al/Ni–Al LDH Al ions migrate into interlayers/on the surface during decomposition. • Mg–Al oxide represents sequence of periclase- and spinel-like layers with vacancies. • Ni–Al oxide has a sandwich-like structure with NiO-like core and surface spinel layers. • The models explain the presence/absence of “memory effect” for Mg–Al/Ni–Al oxides.« less

  19. Perceptions des jeunes victimes de violence sexuelle au sein de leurs relations amoureuses sur leur pire expérience

    PubMed Central

    Van Camp, Tinneke; Hébert, Martine; Fernet, Mylène; Blais, Martin; Lavoie, Francine

    2016-01-01

    Cette étude explore les pires expériences vécues dans les relations amoureuses de jeunes qui ont rapporté avoir vécu de la violence sexuelle dans une relation de couple récente. Quelles sont les situations perçues comme étant les plus difficiles par les jeunes et est-ce que celles-ci se limitent à des incidents violents? Le questionnaire sur les parcours amoureux des jeunes (PAJ) a été complété par des jeunes Québécois âgés de 14 à 18 ans. Au total, plus de 600 participants ont rapporté au moins un épisode de violence sexuelle (souvent en combinaison avec d’autres formes de violence). Nous présentons les résultats de l’analyse qualitative inductive fondée sur une question ouverte concernant la pire expérience vécue. Les observations suggèrent que, en plus des expériences de violence, les difficultés relationnelles, les ruptures amoureuses et les sentiments amoureux non réciproques sont des situations particulièrement difficiles selon les propos des jeunes. Ces différents enjeux vécus par les jeunes devraient être pris en considération dans l’offre de services d’intervention à leur intention. PMID:28191266

  20. Molecular structure of Mg-Al, Mn-Al and Zn-Al halotrichites-type double sulfates--an infrared spectroscopic study.

    PubMed

    Palmer, Sara J; Frost, Ray L

    2011-05-01

    Near infrared (NIR), X-ray diffraction (XRD) and infrared (IR) spectroscopy have been applied to halotrichites of the formula MgAl(2)(SO(4))(4)·22H(2)O, MnAl(2)(SO(4))(4)·22H(2)O and ZnAl(2)(SO(4))(4)·22H(2)O. Comparison of the halotrichites in different spectral regions has shown that the incorporation of a divalent transition metal into the halotrichite structure causes a shift in OH stretching band positions to lower wavenumbers. Therefore, an increase of the hydrogen bond strength of the bonded water is observed for divalent cations with a larger molecular mass. XRD has confirmed the formation of halotrichite for all three samples and characteristic peaks of halotrichite have been identified for each halotrichite-type compound. It has been observed that Mg-Al and Mn-Al halotrichite are very similar in structure, while Zn-Al showed several differences particularly in the NIR spectra. This work has shown that compounds with halotrichite structures can be synthesised and characterised by infrared and NIR spectroscopy. Copyright © 2011 Elsevier B.V. All rights reserved.

  1. Mechanisms of elevated-temperature deformation in the B2 aluminides NiAl and CoAl

    NASA Technical Reports Server (NTRS)

    Yaney, D. L.; Nix, W. D.

    1988-01-01

    A strain rate change technique, developed previously for distinguishing between pure-metal and alloy-type creep behavior, was used to study the elevated-temperature deformation behavior of the intermetallic compounds NiAl and CoAl. Tests on NiAl were conducted at temperatures between 1100 and 1300 K while tests on CoAl were performed at temperatures ranging from 1200 to 1400 K. NiAl exhibits pure-metal type behavior over the entire temperature range studied. CoAl, however, undergoes a transition from pure-metal to alloy-type deformation behavior as the temperature is decreased from 1400 to 1200 K. Slip appears to be inherently more difficult in CoAl than in NiAl, with lattice friction effects limiting the mobility of dislocations at a much higher tmeperature in CoAl than in NiAl. The superior strength of CoAl at elevated temperatures may, therefore, be related to a greater lattice friction strengthening effect in CoAl than in NiAl.

  2. CVD Fiber Coatings for Al2O3/NiAl Composites

    NASA Technical Reports Server (NTRS)

    Boss, Daniel E.

    1995-01-01

    While sapphire-fiber-reinforced nickel aluminide (Al2O3/NiAl) composites are an attractive candidate for high-temperature structures, the significant difference in the coefficient of thermal expansion between the NiAl matrix and the sapphire fiber creates substantial residual stresses in the composite. This study seeks to produce two fiber-coating systems with the potential to reduce the residual stresses in the sapphire/NiAl composite system. Chemical vapor deposition (CVD) was used to produce both the compensating and compliant-fiber coatings for use in sapphire/NiAl composites. A special reactor was designed and built to produce the FGM and to handle the toxic nickel precursors. This process was successfully used to produce 500-foot lengths of fiber with coating thicknesses of approximately 3 microns, 5 microns, and 10 microns.

  3. Relevamiento total del hemisferio sur celeste en la frecuencia de 1420 MHz

    NASA Astrophysics Data System (ADS)

    Bava, J. A.; Colomb, F. R.; Hurrel, E.; Larrarte, J. J.; Sanz, A. J.; Testori, J. C.; Reich, P.; Reich, W.; Wielebinski, R.

    En el presente artículo se describe el relevamiento del cielo en el Hemisferio Sur Celeste en la frecuencia de 1420 MHz para declinaciones δ<= -19o realizado con la Antena II de 30 metros de diámetro del IAR. Este relevamiento posee igual sensibilidad (3xr.m.s=50 mK) que el realizado en el Hemisferio Norte con el radiotelescopio de 25 metros de Stockert de la Universidad de Bonn, operado por el Max-Planck Institute für Radioastronomie ( Reich W., 1982, A&ASS 48, 219; Reich P. and Reich W., 1986, A&ASS 63, 205). Con los datos obtenidos por ambos radiotelescopios se posee una base de datos de todo el cielo en esta frecuencia. En esta publicación presentamos los detalles del sistema receptor, técnicas de observación y reducción de datos, calibración y discusión de los errores en los resultados.

  4. Study on Mg/Al Weld Seam Based on Zn–Mg–Al Ternary Alloy

    PubMed Central

    Liu, Liming; Liu, Fei; Zhu, Meili

    2014-01-01

    Based on the idea of alloying welding seams, a series of Zn–xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA) welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded joints were improved with the increasing of the Al content in the Zn–xAl filler metals, and when Zn–30Al was used as the filler metal, the ultimate tensile strength could reach a maximum of 120 MPa. The reason for the average tensile strength of the joint increasing was that the weak zone of the joint using Zn–30Al filler metal was generated primarily by α-Al instead of MgZn2. When Zn–40Al was used as the filler metal, a new transition zone, about 20 μm-wide, appeared in the edge of the fusion zone near the Mg base metal. Due to the transition zones consisting of MgZn2- and Al-based solid solution, the mechanical property of the joints was deteriorated. PMID:28788508

  5. Chemical failure modes of AlQ3-based OLEDs: AlQ3 hydrolysis.

    PubMed

    Knox, John E; Halls, Mathew D; Hratchian, Hrant P; Schlegel, H Bernhard

    2006-03-28

    Tris(8-hydroxyquinoline)aluminum(III), AlQ3, is used in organic light-emitting diodes (OLEDs) as an electron-transport material and emitting layer. The reaction of AlQ3 with trace H2O has been implicated as a major failure pathway for AlQ3-based OLEDs. Hybrid density functional calculations have been carried out to characterize the hydrolysis of AlQ3. The thermochemical and atomistic details for this important reaction are reported for both the neutral and oxidized AlQ3/AlQ3+ systems. In support of experimental conclusions, the neutral hydrolysis reaction pathway is found to be a thermally activated process, having a classical barrier height of 24.2 kcal mol(-1). First-principles infrared and electronic absorption spectra are compared to further characterize AlQ3 and the hydrolysis pathway product, AlQ2OH. The activation energy for the cationic AlQ3 hydrolysis pathway is found to be 8.5 kcal mol(-1) lower than for the neutral reaction, which is significant since it suggests a role for charge imbalance in promoting chemical failure modes in OLED devices.

  6. Identifying tsunami deposits using shell taphonomy: Sur lagoon, Oman

    NASA Astrophysics Data System (ADS)

    Donato, S.; Reinhardt, E.; Rothaus, R.; Boyce, J.

    2007-05-01

    On November 28th, 1945 an 8.1 magnitude earthquake focused in the eastern portion of the Makran subduction zone (Arabian Sea) generated a powerful tsunami that destroyed many coastal villages in Pakistan and India. Reports indicate that the tsunami also caused significant damage in Muscat, Oman, although its effects elsewhere in Oman are unknown. A thick bivalve dominated shell horizon was discovered inside the Sur lagoon, which is located on the eastern promontory of Oman (200 km south of Muscat). This shell deposit is significant because it is laterally extensive (> 1 km2), extends deep within the lagoon (>2 km), ranges in thickness from 5 - 25 cm at the sample localities, contains numerous subtidal and offshore bivalve species, and articulated subtidal and offshore bivalve species are abundant. Although there is an absence of typical tsunami indicators such as allochthonous sediment in and around the lagoon, verbal accounts, cultural evidence recovered during coring, and the absence of strong storms during the past 100 years indicates that this shell unit was caused by the 1945 tsunami. In this setting, it would be advantageous to have another proxy for tsunami detection and risk prediction. The use of shell taphonomy is one of the potential indicators and here we present new evidence of its utility. We sampled this unit in eight locations, and compared the shell taphonomy to surface shell samples collected from beach and reworked horizons in the lagoon, and to shell samples from a known tsunami and corresponding storm/ballast deposit in Israel (Reinhardt et al., 2006). Taphonomic analysis yielded promising results, as the two tsunami horizons shared excellent agreement between the amount of fragmented shells, and the percentage of shells displaying angular breaks. Both of these categories were significantly different from the percentage of fragments and angular fragments recovered from the reworked, beach, and storm/ballast deposits, indicating different

  7. Optical, structural, and nuclear scientific studies of AlGaN with high Al composition

    NASA Astrophysics Data System (ADS)

    Lin, Tse Yang; Chung, Yee Ling; Li, Lin; Yao, Shude; Lee, Y. C.; Feng, Zhe Chuan; Ferguson, Ian T.; Lu, Weijie

    2010-08-01

    AlGaN epilayers with higher Al-compositions were grown by Metalorganic Chemical Vapor Deposition (MOCVD) on (0001) sapphire. Trimethylgallium (TMGa), trimethylaluminium (TMAl) and NH3 were used as the source precursors for Ga, Al, and N, respectively. A 25 nm AlN nucleation layer was first grown at low-temperature of 590 °C at 300 Torr. Followed, AlxGa1-xN layers were grown at 1080 °C on low-temperature AlN nucleation layers. The heterostructures were characterized by a series of techniques, including x-ray diffraction (XRD), Rutherford backscattering (RBS), photoluminescence (PL), scanning electron microscopy (SEM) and Raman scattering. Precise Al compositions were determined through XRD, RBS, and SEM combined measurements. Room Temperature Raman Scattering spectra shows three major bands from AlGaN alloys, which are AlN-like, A1 longitudinal optical (LO) phonon modes, and E2 transverse optical (TO) band, respectively, plus several peak comes from the substrate. Raman spectral line shape analysis lead to an optical determination of the electrical property free carrier concentration of AlGaN. The optical properties of AlGaN with high Al composition were presented here.

  8. Epitaxial growth of Al9Ir2 intermetallic compound on Al(100): Mechanism and interface structure

    NASA Astrophysics Data System (ADS)

    Kadok, J.; Pussi, K.; Šturm, S.; Ambrožič, B.; Gaudry, É.; de Weerd, M.-C.; Fournée, V.; Ledieu, J.

    2018-04-01

    The adsorption of Ir adatoms on Al(100) has been investigated under various exposures and temperature conditions. The experimental and theoretical results reveal a diffusion of Ir adatoms within the Al(100) surface selvedge already at 300 K. Above 593 K, two domains of a (√{5 }×√{5 }) R 26 .6∘ phase are identified by low energy electron diffraction (LEED) and scanning tunneling microscopy measurements. This phase corresponds to the initial growth of an Al9Ir2 compound at the Al(100) surface. The Al9Ir2 intermetallic domains are terminated by bulklike pure Al layers. The structural stability of Al9Ir2 (001) grown on Al(100) has been analyzed by density functional theory based calculations. Dynamical LEED analysis is consistent with an Ir adsorption leading to the growth of an Al9Ir2 intermetallic compound. We propose that the epitaxial relationship Al9Ir2(001 ) ∥Al (100) and Al9Ir2[100 ] ∥Al [031 ]/[013 ] originates from a matching of Al atomic arrangements present both on Al(100) and on pure Al(001) layers present in the Al9Ir2 compound. Finally, the interface between Al9Ir2 precipitates and the Al matrix has been characterized by transmission electron microscopy measurements. The cross-sectional observations are consistent with the formation of Al9Ir2 (001) compounds. These measurements indicate an important Ir diffusion within Al(100) near the surface region. The coherent interface between Al9Ir2 and the Al matrix is sharp.

  9. Formation of gamma(sup prime)-Ni3Al via the Peritectoid Reaction: gamma + beta (+ Al2O3)=gamma(sup prime)(+ Al2O3)

    NASA Technical Reports Server (NTRS)

    Copeland, Evan

    2008-01-01

    The activities of Al and Ni were measured using multi-cell Knudsen effusion-cell mass spectrometry (multi-cell KEMS), over the composition range 8-32 at.%Al and temperature range T=1400-1750 K in the Ni-Al-O system. These measurements establish that equilibrium solidification of gamma(sup prime)-Ni3Al-containing alloys occurs by the eutectic reaction, L (+ Al2O3)=gamma + Beta(+ Al2O3), at 1640 +/- 1 K and a liquid composition of 24.8 +/- 0.2 at.%al (at an unknown oxygen content). The {gamma + Beta (+Al2O3} phase field is stable over the temperature range 1633-1640 K, and gamma(sup prime)-Ni3Al forms via the peritectoid, gamma + Beta (+ Al2O3)=gamma(sup prime) (+ Al2O3), at 1633 +/- 1 K. This behavior is consistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady-state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma(sup prime)-Ni2Al phase field.

  10. Chemical trend of superconducting transition temperature in hole-doped delafossite of CuAlO2, AgAlO2 and AuAlO2

    NASA Astrophysics Data System (ADS)

    Nakanishi, Akitaka; Katayama-Yoshida, Hiroshi

    2012-12-01

    We have performed the first-principles calculations about the superconducting transition temperature Tc of hole-doped delafossite CuAlO2, AgAlO2 and AuAlO2. Calculated Tc are about 50 K (CuAlO2), 40 K (AgAlO2) and 3 K(AuAlO2) at maximum in the optimum hole-doping concentration. The low Tc of AuAlO2 is attributed to the weak electron-phonon interaction caused by the low covalency and heavy atomic mass.

  11. Atomistic simulation of Al-graphene thin film growth on polycrystalline Al substrate

    NASA Astrophysics Data System (ADS)

    Zhang, Lan; Zhu, Yongchao; Li, Na; Rong, Yan; Xia, Huimin; Ma, Huizhong

    2018-03-01

    The growth of Al-Graphene composite coatings on polycrystalline Al substrate was investigated by using classical molecular dynamics (MD) simulations. Unlike the diffusion behaviors on single crystal surface, most of adatoms were easily bound by the steps on polycrystalline Al surface, owing to the local accelerated energy. Both Ehrlich-Schwoebel (ES) barriers and the steering effect backed up the volmer-weber growth mode, which was consistent with the dynamic growth process observed in the deposit. The morphology of composite coatings was significantly affected by graphene flakes. Enrichment of graphene flakes gave rise to an increase of the local thickness, and graphene flakes only existed in Al grain boundaries. The size of Al grains in the composite coating visibly decreased when compared with that in the pure Al coating. This grain refinement and the mechanical property can be reinforced by the increase of graphene flakes.

  12. Insulator-semiconductor interface fixed charges in AlGaN/GaN metal-insulator-semiconductor devices with Al2O3 or AlTiO gate dielectrics

    NASA Astrophysics Data System (ADS)

    Le, Son Phuong; Nguyen, Duong Dai; Suzuki, Toshi-kazu

    2018-01-01

    We have investigated insulator-semiconductor interface fixed charges in AlGaN/GaN metal-insulator-semiconductor (MIS) devices with Al2O3 or AlTiO (an alloy of Al2O3 and TiO2) gate dielectrics obtained by atomic layer deposition on AlGaN. Analyzing insulator-thickness dependences of threshold voltages for the MIS devices, we evaluated positive interface fixed charges, whose density at the AlTiO/AlGaN interface is significantly lower than that at the Al2O3/AlGaN interface. This and a higher dielectric constant of AlTiO lead to rather shallower threshold voltages for the AlTiO gate dielectric than for Al2O3. The lower interface fixed charge density also leads to the fact that the two-dimensional electron concentration is a decreasing function of the insulator thickness for AlTiO, whereas being an increasing function for Al2O3. Moreover, we discuss the relationship between the interface fixed charges and interface states. From the conductance method, it is shown that the interface state densities are very similar at the Al2O3/AlGaN and AlTiO/AlGaN interfaces. Therefore, we consider that the lower AlTiO/AlGaN interface fixed charge density is not owing to electrons trapped at deep interface states compensating the positive fixed charges and can be attributed to a lower density of oxygen-related interface donors.

  13. 26Al- 26Mg and 207Pb- 206Pb systematics of Allende CAIs: Canonical solar initial 26Al/ 27Al ratio reinstated

    NASA Astrophysics Data System (ADS)

    Jacobsen, Benjamin; Yin, Qing-zhu; Moynier, Frederic; Amelin, Yuri; Krot, Alexander N.; Nagashima, Kazuhide; Hutcheon, Ian D.; Palme, Herbert

    2008-07-01

    The precise knowledge of the initial 26Al/ 27Al ratio [( 26Al/ 27Al) 0] is crucial if we are to use the very first solid objects formed in our Solar System, calcium-aluminum-rich inclusions (CAIs) as the "time zero" age-anchor and guide future work with other short-lived radio-chronometers in the early Solar System, as well as determining the inventory of heat budgets from radioactivities for early planetary differentiation. New high-precision multi-collector inductively-coupled plasma mass spectrometry (MC-ICP-MS) measurements of 27Al/ 24Mg ratios and Mg-isotopic compositions of nine whole-rock CAIs (six mineralogically characterized fragments and three micro-drilled inclusions) from the CV carbonaceous chondrite, Allende yield a well-defined 26Al- 26Mg fossil isochron with an ( 26Al/ 27Al) 0 of (5.23 ± 0.13) × 10 - 5 . Internal mineral isochrons obtained for three of these CAIs ( A44A, AJEF, and A43) are consistent with the whole-rock CAI isochron. The mineral isochron of AJEF with ( 26Al/ 27Al) 0 = (4.96 ± 0.25) × 10 - 5 , anchored to our precisely determined absolute 207Pb- 206Pb age of 4567.60 ± 0.36 Ma for the same mineral separates, reinstate the "canonical" ( 26Al/ 27Al) 0 of 5 × 10 - 5 for the early Solar System. The uncertainty in ( 26Al/ 27Al) 0 corresponds to a maximum time span of ± 20 Ka (thousand years), suggesting that the Allende CAI formation events were culminated within this time span. Although all Allende CAIs studied experienced multistage formation history, including melting and evaporation in the solar nebula and post-crystallization alteration likely on the asteroidal parent body, the 26Al- 26Mg and U-Pb-isotopic systematics of the mineral separates and bulk CAIs behaved largely as closed-system since their formation. Our data do not support the "supra-canonical" 26Al/ 27Al ratio of individual minerals or their mixtures in CV CAIs, suggesting that the supra-canonical 26Al/ 27Al ratio in the CV CAIs may have resulted from post

  14. Effects of Al(III) and Nano-Al13 Species on Malate Dehydrogenase Activity

    PubMed Central

    Yang, Xiaodi; Cai, Ling; Peng, Yu; Li, Huihui; Chen, Rong Fu; Shen, Ren Fang

    2011-01-01

    The effects of different aluminum species on malate dehydrogenase (MDH) activity were investigated by monitoring amperometric i-t curves for the oxidation of NADH at low overpotential using a functionalized multi-wall nanotube (MWNT) modified glass carbon electrode (GCE). The results showed that Al(III) and Al13 can activate the enzymatic activity of MDH, and the activation reaches maximum levels as the Al(III) and Al13 concentration increase. Our study also found that the effects of Al(III) and Al13 on the activity of MDH depended on the pH value and aluminum speciation. Electrochemical and circular dichroism spectra methods were applied to study the effects of nano-sized aluminum compounds on biomolecules. PMID:22163924

  15. Effects of Al(III) and nano-Al13 species on malate dehydrogenase activity.

    PubMed

    Yang, Xiaodi; Cai, Ling; Peng, Yu; Li, Huihui; Chen, Rong Fu; Shen, Ren Fang

    2011-01-01

    The effects of different aluminum species on malate dehydrogenase (MDH) activity were investigated by monitoring amperometric i-t curves for the oxidation of NADH at low overpotential using a functionalized multi-wall nanotube (MWNT) modified glass carbon electrode (GCE). The results showed that Al(III) and Al(13) can activate the enzymatic activity of MDH, and the activation reaches maximum levels as the Al(III) and Al(13) concentration increase. Our study also found that the effects of Al(III) and Al(13) on the activity of MDH depended on the pH value and aluminum speciation. Electrochemical and circular dichroism spectra methods were applied to study the effects of nano-sized aluminum compounds on biomolecules.

  16. Fracture toughness of Ti-Al3Ti-Al-Al3Ti laminate composites under static and cyclic loading conditions

    NASA Astrophysics Data System (ADS)

    Patselov, A. M.; Gladkovskii, S. V.; Lavrikov, R. D.; Kamantsev, I. S.

    2015-10-01

    The static and cyclic fracture toughnesses of a Ti-Al3Ti-Al-Al3Ti laminate composite material containing at most 15 vol % intermetallic compound are studied. Composite specimens are prepared by terminating reaction sintering of titanium and aluminum foils under pressure. The fracture of the titanium layers is quasi-cleavage during cyclic crack growth and is ductile during subsequent static loading.

  17. Actes des journees de linguistique: Colloque sur la recherche etudiante (Proceedings of the Linguistics Conference: Colloquium on Student Research) (Quebec, Canada, March 18-19, 1988).

    ERIC Educational Resources Information Center

    Lepage, Danielle, Ed.; Dominik, Annette, Ed.

    Presentations by students at a colloquium on student research on the occasion of the 50th anniversary of the University of Laval's Faculty of Letters, March 18-19, 1988, include: "Une enquete sur la qualite du francais ecrit au Quebec"; "Amenagement linguistique et neologie"; "Analyse syntaxique des 'arrets et retours' en…

  18. Lipid Biomarkers for Methanogens in Hypersaline Cyanobacterial Mats for Guerrero Negro, Baja California Sur

    NASA Technical Reports Server (NTRS)

    Jahnke, Linda L.; Embaye, Tsegereda; Summons, Roger E.; Fonda, Mark (Technical Monitor)

    2002-01-01

    Analyses of sediments from the vicinity of active methane seeps have uncovered a particular suite of lipid biomarker patterns that characterize methane consuming archaea and their syntrophic, sulfate reducing partners. These isoprenoid biomarkers, largely identified by their anomalously light carbon isotopic signatures, have been a topic of intense research activity and are recorded in numerous methane-rich environments from Holocene to Cenozoic. This phenomenon has implications for depleted kerogens at 2.7 Ga on early Earth (Hinrichs 2002). In contrast, the lipid biosignatures of methane producing archaea are not readily identified through distinct isotopic labels and have received comparably little attention in analyses of archaea in environmental samples. Indeed, environmental analyses generally detect only free archaeal lipids, not the intact, polar molecules found in the membrane of living organisms. As part of the Ames NAI, the 'Early Microbial Ecosystem Research Group' (EMERG) is working to understand microbial processes in the hypersaline cyanobacterial mats growing in the salt evaporation ponds of the Exportadora de Sal at Guerrero Negro, Baja California Sur, Mexico. The aim of this study was to develop methods by which we could identify the organisms responsible for methane generation in this environment. While the ester-bound fatty acids, hopanoids and wax esters provide a means to identify most of the bacterial components of these mats, the archaea which Ere evidently present through genomic assays and the fact of intense methane production (Hoehler et al. 200l), have not been identified through their corresponding lipid signatures. Archaeal core lipids present a number of analytical challenges. The core lipids of methanogens comprise C20, C40 and sometimes C25 isoprenoid chains, linked through ether bonds to glycerol. As well as archaeal (C20), sn-2- and sn-3-hydroxyarchaeol are associated particularly with methylotrophic methanogens. Recently, we have

  19. Co-existence of a few and sub micron inhomogeneities in Al-rich AlGaN/AlN quantum wells

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Iwata, Yoshiya; Oto, Takao; Banal, Ryan G.

    2015-03-21

    Inhomogeneity in Al-rich AlGaN/AlN quantum wells is directly observed using our custom-built confocal microscopy photoluminescence (μ-PL) apparatus with a reflective system. The μ-PL system can reach the AlN bandgap in the deep ultra-violet spectral range with a spatial resolution of 1.8 μm. In addition, cathodoluminescence (CL) measurements with a higher spatial resolution of about 100 nm are performed. A comparison of the μ-PL and CL measurements reveals that inhomogeneities, which have different spatial distributions of a few- and sub-micron scales that are superimposed, play key roles in determining the optical properties.

  20. Defence SDI - A Useful Current Awareness System (Dissemination Selective de L’Information sur la Defense: Un Systeme Pratique D’Information Permanente).

    DTIC Science & Technology

    1980-09-01

    OF SCIENTIFIC INFORMATION SERVICES L EFENCE SDI - A USEFUL CURRENT AWARENESS SYSTEM (Dissemination Selective de L’Information, Sur la Defense: Un...Dalhousie University, Halifax, Nova Scotia. CAUTION This information is furnished with the express understanding that proprietary and patent rights will be...may add his knowledge of information exchange agreements and Canadian projects covered by these agreements. These exchange agreements are important

  1. Aluminium (Al) speciation in serum and urine after subcutaneous venom immunotherapy with Al as adjuvant.

    PubMed

    Michalke, Bernhard; Kramer, Matthias F; Brehler, Randolf

    2018-02-21

    Aluminium is associated with disorders and is the commonly used vaccine adjuvant. Understanding the mechanisms of how Al is transported, metabolized or of its toxicity depends on the knowledge of Al-interactions with bioligands, i.e. Al-species. Al-speciation in serum is difficult because of low concentration and the risk of exogenous Al contamination. Furthermore, Al-measurements may be hampered according to various interferences. This study aims for developing quality controlled protocols for reliable Al- and Al-species determination and for investigating probable differences in Al (-speciation) after Al-containing subcutaneous immunotherapy (SIT). Sample donors were recruited either for the control group ("class-0", they never had been treated with SIT containing an Al-depot extract) or for the SIT-group ("class-1", they previously had been treated with SIT for insect venom allergy with an Al-depot extract). Blood was drawn for medical reasons and serum prepared. Additionally, some sample donors collected 24-h-urine. They had been informed (and they consented) about the scientific use of their samples. The study was approved by the ethic committee of the "Medical Association Westphalia-Lippe" and of the University of Münster, evaluating the study positively (No. 2013-667-f-S). We applied quality controlled sample preparation and interference-free Al detection by ICP sectorfield-mass spectrometry. Al-species were analysed using size-exclusion-chromatography-ICP-qMS. Al-concentrations or speciation in urine samples showed no differences between class-0 and class-1. Al-citrate was the main uric Al-species. In serum elevated Al-concentrations were found for both classes, with class-1 samples being significantly higher than class-0 (p = 0.041), but class-0 samples being approximately 10-fold too high compared to reference values from non-exposed persons. We identified gel-monovettes as contamination source. In contamination-free samples from HNO 3 -prewashed gel

  2. Seasonal variability shapes resilience of small-scale fisheries in Baja California Sur, Mexico.

    PubMed

    Pellowe, Kara E; Leslie, Heather M

    2017-01-01

    Small-scale fisheries are an important source of food and livelihoods to coastal communities around the world. Understanding the seasonality of fisheries catch and composition is crucial to fisheries management, particularly in the context of changing environmental and socioeconomic conditions. While seasonal variability directly impacts the lives of fishers, most fisheries studies focus on longer-term change. Here we examine seasonal variability in the small-scale fisheries of Baja California Sur, Mexico based on 13 years of government fisheries data. We investigate how four fisheries indicators with direct relevance to ecological resilience-magnitude and variance of landed fish biomass, taxon richness and the proportion of top-trophic-level taxa in total catch-vary within and among years and at multiple spatial scales. We find that these resilience indicators vary both seasonally and spatially. These results highlight the value of finer-scale monitoring and management, particularly for data-poor fisheries.

  3. Seasonal variability shapes resilience of small-scale fisheries in Baja California Sur, Mexico

    PubMed Central

    Leslie, Heather M.

    2017-01-01

    Small-scale fisheries are an important source of food and livelihoods to coastal communities around the world. Understanding the seasonality of fisheries catch and composition is crucial to fisheries management, particularly in the context of changing environmental and socioeconomic conditions. While seasonal variability directly impacts the lives of fishers, most fisheries studies focus on longer-term change. Here we examine seasonal variability in the small-scale fisheries of Baja California Sur, Mexico based on 13 years of government fisheries data. We investigate how four fisheries indicators with direct relevance to ecological resilience–magnitude and variance of landed fish biomass, taxon richness and the proportion of top-trophic-level taxa in total catch–vary within and among years and at multiple spatial scales. We find that these resilience indicators vary both seasonally and spatially. These results highlight the value of finer-scale monitoring and management, particularly for data-poor fisheries. PMID:28783740

  4. Synthesis of core-shell AlOOH hollow nanospheres by reacting Al nanoparticles with water

    NASA Astrophysics Data System (ADS)

    Lozhkomoev, A. S.; Glazkova, E. A.; Bakina, O. V.; Lerner, M. I.; Gotman, I.; Gutmanas, E. Y.; Kazantsev, S. O.; Psakhie, S. G.

    2016-05-01

    A novel route for the synthesis of boehmite nanospheres with a hollow core and the shell composed of highly crumpled AlOOH nanosheets by oxidizing Al nanopowder in pure water under mild processing conditions is described. The stepwise events of Al transformation into boehmite are followed by monitoring the pH in the reaction medium. A mechanism of formation of hollow AlOOH nanospheres with a well-defined shape and crystallinity is proposed which includes the hydration of the Al oxide passivation layer, local corrosion of metallic Al accompanied by hydrogen evolution, the rupture of the protective layer, the dissolution of Al from the particle interior and the deposition of AlOOH nanosheets on the outer surface. In contrast to previously reported methods of boehmite nanoparticle synthesis, the proposed method is simple, and environmentally friendly and allows the generation of hydrogen gas as a by-product. Due to their high surface area and high, slit-shaped nanoporosity, the synthesized AlOOH nanostructures hold promise for the development of more effective catalysts, adsorbents, vaccines and drug carriers.

  5. Millimeter distance effects of surface plasmon polaritons in electroformed Al-Al2O3-Ag diodes

    NASA Astrophysics Data System (ADS)

    Hickmott, T. W.

    2017-02-01

    Electroforming of metal-insulator-metal diodes is a soft dielectric breakdown that changes the high resistance of as-prepared diodes to a low resistance state. Electroforming of Al-Al2O3-metal diodes with anodic Al2O3 results in voltage-controlled negative resistance in the current-voltage (I-V) characteristics, electroluminescence (EL), and electron emission into vacuum (EM). EL is due to electrons injected at the Al-Al2O3 interface combining with radiative defects in Al2O3. Surface plasmon polaritons (SPPs) are electromagnetic waves that can be excited by photons or electrons. SPPs are confined to a metal-dielectric interface, cause large electric fields in the metal and dielectric, and have ranges of micrometers. The temperature dependence of I-V curves, EL, and EM of a group of electroformed Al-Al2O3-Ag diodes with Al2O3 thicknesses between 12 nm and 20 nm, group A, was measured between 200 K and 300 K. After a sequence of temperature measurements, the Al-Al2O3-Ag diodes, the Al-Al2O3 regions between diodes, and portions of the Ag on the glass region that provides contacts to the diodes are darkened. The range of darkening is >7 mm in a diode with 12 nm of Al2O3 and 2.0-3.5 mm in diodes with Al2O3 thicknesses between 14 nm and 20 nm. Darkening is attributed to the occurrence of SPPs generated by EL photons at the Ag-Al2O3 and Al-Al2O3 interfaces. The results are compared to a second group of Al-Al2O3-Ag diodes with identical Al2O3 thicknesses, group B, that were prepared in the same way as the diodes of group A except for a difference in the deposition of Al films for the two groups. Al-Al2O3-Ag diodes of group B exhibit enhanced EL, which is attributed to spontaneous emission of recombination centers in Al2O3 being enhanced by large electromagnetic fields that are due to SPPs that are generated by EL photons.

  6. Electronic transport through Al/InN nanowire/Al junctions

    DOE PAGES

    Lu, Tzu -Ming; Wang, George T.; Pan, Wei; ...

    2016-02-10

    We report non-linear electronic transport measurement of Al/Si-doped n-type InN nanowire/Al junctions performed at T = 0.3 K, below the superconducting transition temperature of the Al electrodes. The proximity effect is observed in these devices through a strong dip in resistance at zero bias. In addition to the resistance dip at zero bias, several resistance peaks can be identified at bias voltages above the superconducting gap of the electrodes, while no resistance dip is observed at the superconducting gap. The resistance peaks disappear as the Al electrodes turn normal beyond the critical magnetic field except one which remains visible atmore » fields several times higher than critical magnetic field. An unexpected non-monotonic magnetic field dependence of the peak position is observed. As a result, we discuss the physical origin of these observations and propose that the resistance peaks could be the McMillan-Rowell oscillations arising from different closed paths localized near different regions of the junctions.« less

  7. Rechargeable Al/Cl2 battery with molten AlCl4/-/ electrolyte.

    NASA Technical Reports Server (NTRS)

    Holleck, G. L.; Giner, J.; Burrows, B.

    1972-01-01

    A molten salt system based on Al- and Cl2 carbon electrodes, with an AlCl3 alkali chloride eutectic as electrolyte, offers promise as a rechargeable, high energy density battery which can operate at a relatively low temperature. Electrode kinetic studies showed that the electrode reactions at the Al anode were rapid and that the observed passivation phenomena were due to the formation at the electrode surface of a solid salt layer resulting from concentration changes on anodic or cathodic current flow. It was established that carbon electrodes were intrinsically active for chlorine reduction in AlCl3-alkali chloride melts. By means of a rotating vitreous carbon disk electrode, the kinetic parameters were determined.

  8. Two-Phase Eutectic Growth in Al-Cu and Al-Cu-Ag

    NASA Astrophysics Data System (ADS)

    Senninger, Oriane; Peters, Matthew; Voorhees, Peter W.

    2018-02-01

    The microstructure developed by two-phase lamellar eutectics (α ) -(θ {-Al}2{Cu}) in Al-Cu and Al-Cu-Ag alloys is analyzed. A model of two-phase eutectic growth in multicomponent alloys is used to determine the scaling law of the eutectic microstructure using the alloy thermophysical properties. The application of the model to these alloys shows that the addition of Ag to Al-Cu alloys does not significantly change the length scale of the microstructure, which is in agreement with previous experimental studies. This is explained by the combined phenomena of the decrease in interface energies with the addition of Ag and the superheating of the (α ) phase interface induced by the Ag composition profile.

  9. Hot Corrosion Behavior of Stainless Steel with Al-Si/Al-Si-Cr Coating

    NASA Astrophysics Data System (ADS)

    Fu, Guangyan; Wu, Yongzhao; Liu, Qun; Li, Rongguang; Su, Yong

    2017-03-01

    The 1Cr18Ni9Ti stainless steel with Al-Si/Al-Si-Cr coatings is prepared by slurry process and vacuum diffusion, and the hot corrosion behavior of the stainless steel with/without the coatings is studied under the condition of Na2SO4 film at 950 °C in air. Results show that the corrosion kinetics of stainless steel, the stainless steel with Al-Si coating and the stainless steel with Al-Si-Cr coating follow parabolic laws in several segments. After 24 h corrosion, the sequence of the mass gain for the three alloys is the stainless steel with Al-Si-Cr coating < the stainless steel with Al-Si coating < the stainless steel without any coating. The corrosion products of the three alloys are layered. Thereinto, the corrosion products of stainless steel without coating are divided into two layers, where the outside layer contains a composite of Fe2O3 and FeO, and the inner layer is Cr2O3. The corrosion products of the stainless steel with Al-Si coating are also divided into two layers, of which the outside layer mainly consists of Cr2O3, and the inner layer is mainly SiO2. The corrosion film of the stainless steel with Al-Si-Cr coating is thin and dense, which combines well with substrate. Thereinto, the outside layer is mainly Cr2O3, and the inside layer is Al2O3. In the matrix of all of the three alloys, there exist small amount of sulfides. Continuous and protective films of Cr2O3, SiO2 and Al2O3 form on the surface of the stainless steel with Al-Si and Al-Si-Cr coatings, which prevent further oxidation or sulfide corrosion of matrix metals, and this is the main reason for the much smaller mass gain of the two alloys than that of the stainless steel without any coatings in the 24 h hot corrosion process.

  10. Microstructural and Phase Composition Differences Across the Interfaces in Al/Ti/Al Explosively Welded Clads

    NASA Astrophysics Data System (ADS)

    Fronczek, Dagmara Malgorzata; Chulist, Robert; Litynska-Dobrzynska, Lidia; Lopez, Gabriel Alejandro; Wierzbicka-Miernik, Anna; Schell, Norbert; Szulc, Zygmunt; Wojewoda-Budka, Joanna

    2017-09-01

    The microstructure and phase composition of Al/Ti/Al interfaces with respect to their localization were investigated. An aluminum-flyer plate exhibited finer grains located close to the upper interface than those present within the aluminum-base plate. The same tendency, but with a higher number of twins, was observed for titanium. Good quality bonding with a wavy shape and four intermetallic phases, namely, TiAl3, TiAl, TiAl2, and Ti3Al, was only obtained at the interface closer to the explosive material. The other interface was planar with three intermetallic compounds, excluding the metastable TiAl2 phase. As a result of a 100-hour annealing at 903 K (630 °C), an Al/TiAl3/Ti/TiAl3/Al sandwich was manufactured, formed with single crystalline Al layers. A substantial difference between the intermetallic layer thicknesses was measured, with 235.3 and 167.4 µm obtained for the layers corresponding to the upper and lower interfaces, respectively. An examination by transmission electron microscopy of a thin foil taken from the interface area after a 1-hour annealing at 825 K (552 °C) showed a mixture of randomly located TiAl3 grains within the aluminum. Finally, the hardness results were correlated with the microstructural changes across the samples.

  11. Response of rice to Al stress and identification of quantitative trait Loci for Al tolerance.

    PubMed

    Ma, Jian Feng; Shen, Renfang; Zhao, Zhuqing; Wissuwa, Matthias; Takeuchi, Yoshinobu; Ebitani, Takeshi; Yano, Masahiro

    2002-06-01

    Rice (Oryza sativa L.) shows the highest tolerance to Al toxicity among small-grain cereal crops, however, the mechanisms and genetics responsible for its high Al tolerance are not yet well understood. We investigated the response of rice to Al stress using the japonica variety Koshihikari in comparison to the indica variety Kasalath. Koshihikari showed higher tolerance at various Al concentrations than Kasalath. The Al content in root apexes was less in Koshihikari than in Kasalath, suggesting that exclusion mechanisms rather than internal detoxification are acting in Koshihikari. Al-induced secretion of citrate was observed in both Koshihikari and Kasalath, however, it is unlikely to be the mechanism for Al tolerance because there was no significant difference in the amount of citrate secreted between Koshihikari and Kasalath. Quantitative trait loci (QTLs) for Al tolerance were mapped in a population of 183 backcross inbred lines (BILs) derived from a cross of Koshihikari and Kasalath. Three putative QTLs controlling Al tolerance were detected on chromosomes 1, 2 and 6. Kasalath QTL alleles on chromosome 1 and 2 reduced Al tolerance but increased tolerance on chromosome 6. The three QTLs explained about 27% of the phenotypic variation in Al tolerance. The existence of QTLs for Al tolerance was confirmed in substitution lines for corresponding chromosomal segments.

  12. An epidemiological study of cutaneous leishmaniasis in Al-jabal Al-gharbi, Libya.

    PubMed

    Abdellatif, Manal Z M; El-Mabrouk, Khamis; Ewis, Ashraf A

    2013-02-01

    Cutaneous leishmaniasis (CL) is an endemic parasitic infection in the Mediterranean region, including Libya and its Al-jabal Al-gharbi province. We aimed at studying the occupational relevance as well as other epidemiological aspects of CL. We investigated 140 CL cases who attended at Gharyan outpatient polyclinic during a period of 6 months in 2009. CL infection was clinically diagnosed and confirmed by demonstration of Leishmania parasites on smears from lesions. Our findings showed that males were more affected than females (P=0.04), and people above 10-years were more affected than younger ones (P=0.0001). A significant percent of CL cases belonged to Al-Kawasem subprovince (P=0.0001). Farm-related activities were the most frequent occupations among CL cases (P=0.04). In addition to farm workers, housewives and students are at risk groups since they are engaged at farm activities. Moreover, those who have occupations that require staying outdoors for a part of night, e.g., policemen, are also at risk. Compared to children, adult CL patients had multiple lesions (P=0.001) that were more prevalent in their upper and lower extremities than the face (P=0.0001). We conclude that CL is a major health problem in Al-jabal Al-gharbi province of Libya. The presence of rodents and sandflies makes it a suitable environment for Leishmania to spread in an endemic epidemiological pattern. Being engaged in farming activities or outdoor occupations increases the risk of infection. Various clinical patterns of CL suggest the presence of more than 1 species of Leishmania at Al-jabal Al-gharbi province. We propose that the 2 species responsible for CL in this area are L. major and L. tropica. Further investigations to identify the leishmanial species responsible for CL at Al-jabal Al-gharbi together with adoption of preventive and control programs are needed.

  13. An Epidemiological Study of Cutaneous Leishmaniasis in Al-Jabal Al-Gharbi, Libya

    PubMed Central

    Abdellatif, Manal Z. M.; El-Mabrouk, Khamis

    2013-01-01

    Cutaneous leishmaniasis (CL) is an endemic parasitic infection in the Mediterranean region, including Libya and its Al-jabal Al-gharbi province. We aimed at studying the occupational relevance as well as other epidemiological aspects of CL. We investigated 140 CL cases who attended at Gharyan outpatient polyclinic during a period of 6 months in 2009. CL infection was clinically diagnosed and confirmed by demonstration of Leishmania parasites on smears from lesions. Our findings showed that males were more affected than females (P=0.04), and people above 10-years were more affected than younger ones (P=0.0001). A significant percent of CL cases belonged to Al-Kawasem subprovince (P=0.0001). Farm-related activities were the most frequent occupations among CL cases (P=0.04). In addition to farm workers, housewives and students are at risk groups since they are engaged at farm activities. Moreover, those who have occupations that require staying outdoors for a part of night, e.g., policemen, are also at risk. Compared to children, adult CL patients had multiple lesions (P=0.001) that were more prevalent in their upper and lower extremities than the face (P=0.0001). We conclude that CL is a major health problem in Al-jabal Al-gharbi province of Libya. The presence of rodents and sandflies makes it a suitable environment for Leishmania to spread in an endemic epidemiological pattern. Being engaged in farming activities or outdoor occupations increases the risk of infection. Various clinical patterns of CL suggest the presence of more than 1 species of Leishmania at Al-jabal Al-gharbi province. We propose that the 2 species responsible for CL in this area are L. major and L. tropica. Further investigations to identify the leishmanial species responsible for CL at Al-jabal Al-gharbi together with adoption of preventive and control programs are needed. PMID:23467624

  14. Formation of epitaxial Al 2O 3/NiAl(1 1 0) films: aluminium deposition

    NASA Astrophysics Data System (ADS)

    Lykhach, Y.; Moroz, V.; Yoshitake, M.

    2005-02-01

    Structure of epitaxial Al 2O 3 layers formed on NiAl(1 1 0) substrates has been studied by means of reflection high-energy electron diffraction (RHEED). The elucidated structure was compared to the model suggested for 0.5 nm-thick Al 2O 3 layers [K. Müller, H. Lindner, D.M. Zehner, G. Ownby, Verh. Dtsch. Phys. Ges. 25 (1990) 1130; R.M. Jaeger, H. Kuhlenbeck, H.J. Freund, Surf. Sci. 259 (1991) 235]. The stepwise growth of Al 2O 3 film, involving deposition and subsequent oxidation of aluminium onto epitaxial 0.5 nm-thick Al 2O 3 layers, has been investigated. Aluminium was deposited at room temperature, whereas its oxidation took place during annealing at 1070 K. The Al 2O 3 thickness was monitored by means of Auger electron spectroscopy (AES). It was found that Al 2O 3 layer follows the structure of 0.5 nm thick Al 2O 3 film, although a tilting of Al 2O 3(1 1 1) surface plane with respect to NiAl(1 1 0) surface appeared after Al deposition.

  15. Amyotrophic lateral sclerosis (ALS)

    MedlinePlus

    Lou Gehrig disease; ALS; Upper and lower motor neuron disease; Motor neuron disease ... One out of 10 cases of ALS is due to a genetic defect. The cause is unknown in most other cases. In ALS, motor nerve cells (neurons) waste away ...

  16. All About ALS

    MedlinePlus

    ... by storm with videos of people pouring ice water on themselves for the Ice Bucket Challenge. The worldwide phenomenon raised awareness—and millions of research dollars—for a fatal disease called ALS. ALS ...

  17. Oxidation behavior of Al/Cr coating on Ti2AlNb alloy at 900 °C

    NASA Astrophysics Data System (ADS)

    Yang, Zhengang; Liang, Wenping; Miao, Qiang; Chen, Bowen; Ding, Zheng; Roy, Nipon

    2018-04-01

    In this paper, the Al/Cr coating was fabricated on the surface of Ti2AlNb alloy via rf magnetron sputtering and double glow treatment to enhance oxidation resistance. The protective coating with an outer layer of Al and inner layer of Cr has great bonding strength due to the in-diffusion of Cr and the inter-diffusion between Al and Cr to form Al-Cr alloyed layer which has great hardness. Acoustic emission curve which was detected via WS-2005 scratch tester indicates the bonding strength between Al/Cr coating and substrate is great. Morphology of Ti2AlNb alloy with Al/Cr coating after scratch test shows that the scratch is smooth without disbanding, and the depth and breadth of scratch are changed uniformly. The mass change was reduced after oxidation test due to the Al/Cr protective coating. Isothermal oxidation test at 900 °C was researched. Results indicate that Al/Cr coating provided oxidation resistance of Ti2AlNb alloy with prolonged air exposure at 900 °C. Al2O3 was detected by XRD patterns and SEM images, and was formed on the surface of Ti2AlNb alloy to protect substrate during oxidation test. A certain content of Cr is beneficial for the formation of Al2O3. Besides, Cr2O3 was produced under Al2O3 by outward diffusion of Cr to protect substrate sequentially, no cracks were discovered on Al/Cr protective coating. The process of Ti outward diffusion into surface was suppressive due to integration of Cr-Ti and Al-Ti intermetallics. A steady, adherent and continuous coated layer of Al/Cr on Ti2AlNb alloy increases oxidation resistance.

  18. Elastocaloric effect in CuAlZn and CuAlMn shape memory alloys under compression

    PubMed Central

    Qian, Suxin; Wang, Yi; Pillsbury, Thomas E.; Hada, Yoshiharu; Yamaguchi, Yuki; Fujimoto, Kenjiro; Hwang, Yunho; Radermacher, Reinhard; Cui, Jun; Yuki, Yoji; Toyotake, Koutaro; Takeuchi, Ichiro

    2016-01-01

    This paper reports the elastocaloric effect of two Cu-based shape memory alloys: Cu68Al16Zn16 (CuAlZn) and Cu73Al15Mn12 (CuAlMn), under compression at ambient temperature. The compression tests were conducted at two different rates to approach isothermal and adiabatic conditions. Upon unloading at a strain rate of 0.1 s−1 (adiabatic condition) from 4% strain, the highest adiabatic temperature changes (ΔTad) of 4.0 K for CuAlZn and 3.9 K for CuAlMn were obtained. The maximum stress and hysteresis at each strain were compared. The stress at the maximum recoverable strain of 4.0% for CuAlMn was 120 MPa, which is 70% smaller than that of CuAlZn. A smaller hysteresis for the CuAlMn alloy was also obtained, about 70% less compared with the CuAlZn alloy. The latent heat, determined by differential scanning calorimetry, was 4.3 J g−1 for the CuAlZn alloy and 5.0 J g−1 for the CuAlMn alloy. Potential coefficients of performance (COPmat) for these two alloys were calculated based on their physical properties of measured latent heat and hysteresis, and a COPmat of approximately 13.3 for CuAlMn was obtained. This article is part of the themed issue ‘Taking the temperature of phase transitions in cool materials’. PMID:27402936

  19. Structural and compositional evolution of Al{sub 3}(Zr,Y) precipitates in Al-Zr-Y alloy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gao, Haiyan, E-mail: gaohaiyan@sjtu.edu.cn

    Structural and compositional evolution of Al{sub 3}(Zr,Y) precipitates in aged Al-Zr-Y alloy was investigated through atom probe tomography (APT) and transmission electron microscope (TEM) analysis and first principles calculations. The results show that short-bar-shaped D0{sub 19}-Al{sub 3}Y with some Zr atoms dissolved in precipitated at the very beginning of decomposition and worked as heterogeneous nuclei for L1{sub 2}-Al{sub 3}Zr with spherical morphology after being aged at 400 °C for 2 h. Quasi-static coarsening happened as the aging treatment lasted from 2 h to 200 h. However, distribution of Zr and Y atoms in Al{sub 3}(Zr,Y) is nearly uniform and Al{submore » 3}(Zr,Y) do not have the typical “Al{sub 3}RE core-Al{sub 3}Zr shell” structure which observed in other RE containing Al-Zr-RE alloys with L1{sub 2}-Al{sub 3}RE as nuclei. First principles calculations revealed that binding energy between Y and Zr is strong during the growth of Al{sub 3}(Zr,Y), which led to the co-precipitation of Y and Zr atoms and attribute to the evolution of Al{sub 3}(Zr,Y). - Highlights: •Al{sub 3}Y precipitated firstly and then became nuclei for Al{sub 3}Zr during aging of Al-Zr-Y. •Al{sub 3}(Zr,Y) precipitates do not have the typical “Al{sub 3}Y core-Al{sub 3}Zr shell” structure. •Strong binding between Y and Zr led to the co-precipitation of Y and Zr atoms.« less

  20. The two Coissac's novels : l'Envol and Sur la Lune

    NASA Astrophysics Data System (ADS)

    Villain, Jacques

    2002-01-01

    Coissac wrote two novels with his friend Charles Rouch.: "L'Envol" in 1934 and "Sur la Lune" in 1935. In these books he describes the preparation of the lunar rocket weigthing 3000 tons and powered by solid propellants. This rocket is launched from a base built at the top of a peruvian volcano. The seven men crew (5 french and one american) is sent to the Moon in a 45 tons command module from which two lunar modules can be separated and can descent to the lunar surface. Coissac describes along the trajectory the means to guide and control the rocket. The exploration of the Moon is done with bicycles ans suits. The explorers meet strange animals and strange people living under ground like termites in perfect love and happiness. After having explored the two faces of the Moon, the lunar modules leave the Moon for a docking with the main vehicle waiting on a lunar orbit and the crew comes back to the Earth. The spacecraft lands in the Pacific Ocean. Except the direct flight from Earth to the Moon, the travel to the Moon proposed by Coissac is very similar to that of Apollo but more than thirty years earlier.

  1. Revisiting Deng et al.'s Multiparty Quantum Secret Sharing Protocol

    NASA Astrophysics Data System (ADS)

    Hwang, Tzonelih; Hwang, Cheng-Chieh; Yang, Chun-Wei; Li, Chuan-Ming

    2011-09-01

    The multiparty quantum secret sharing protocol [Deng et al. in Chin. Phys. Lett. 23: 1084-1087, 2006] is revisited in this study. It is found that the performance of Deng et al.'s protocol can be much improved by using the techniques of block-transmission and decoy single photons. As a result, the qubit efficiency is improved 2.4 times and only one classical communication, a public discussion, and two quantum communications between each agent and the secret holder are needed rather than n classical communications, n public discussions, and 3n/2 quantum communications required in the original scheme.

  2. Fabrication of Al/Mg/Al Composites via Accumulative Roll Bonding and Their Mechanical Properties

    PubMed Central

    Nie, Jinfeng; Liu, Mingxing; Wang, Fang; Zhao, Yonghao; Li, Yusheng; Cao, Yang; Zhu, Yuntian

    2016-01-01

    Al(1060)/Mg(AZ31)/Al(1060) multilayered composite was successfully produced using an accumulative roll bonding (ARB) process for up to four cycles at an elevated temperature (400 °C). The microstructure evolution of the composites and the bonding characteristics at the interfaces between Al and Mg layers with increasing ARB cycles were characterized through optical microscopy, field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). It was found that the grains of Al and Mg layers were significantly refined and Al3Mg2 and Al12 Mg17 intermetallic compound layers formed at the Al/Mg bonding interfaces. The strength increased gradually and the ultimate tensile strength (UTS) reached a maximum value of about 240 MPa at the third pass. Furthermore, the strengthening mechanism of the composite was analyzed based on the fracture morphologies. PMID:28774072

  3. Suppression of gate leakage current in in-situ grown AlN/InAlN/AlN/GaN heterostructures based on the control of internal polarization fields

    NASA Astrophysics Data System (ADS)

    Kotani, Junji; Yamada, Atsushi; Ishiguro, Tetsuro; Yamaguchi, Hideshi; Nakamura, Norikazu

    2017-03-01

    This paper investigates the gate leakage characteristics of in-situ AlN capped InAlN/AlN/GaN heterostructures grown by metal-organic vapor phase epitaxy. It was revealed that the leakage characteristics of AlN capped InAlN/AlN/GaN heterostructures are strongly dependent on the growth temperature of the AlN cap. For an AlN capped structure with an AlN growth temperature of 740 °C, the leakage current even increased although there exists a large bandgap material on InAlN/AlN/GaN heterostructures. On the other hand, a large reduction of the gate leakage current by 4-5 orders of magnitudes was achieved with a very low AlN growth temperature of 430 °C. X-ray diffraction analysis of the AlN cap grown at 740 °C indicated that the AlN layer is tensile-strained. In contrast to this result, the amorphous structure was confirmed for the AlN cap grown at 430 °C by transmission electron microscopy. Furthermore, theoretical analysis based on one-dimensional band simulation was carried out, and the large increase in two-dimensional electron gas (2DEG) observed in Hall measurements was well reproduced by taking into account the spontaneous and piezo-electric polarization in the AlN layer grown at 740 °C. For the AlN capped structure grown at 430 °C, it is believed that the reduced polarization field in the AlN cap suppressed the penetration of 2DEG into the InAlN barrier layer, resulting in a small impact on 2DEG mobility and density. We believe that an in-situ grown AlN cap with a very low growth temperature of 430 °C is a promising candidate for high-frequency/high-power GaN-based devices with low gate leakage current.

  4. Depolarization currents in Al 2O 3 and MgAl 2O 4 oxides

    NASA Astrophysics Data System (ADS)

    Carvalhaes, R. P. M.; Rocha, M. S.; de Souza, S. S.; Blak, A. R.

    2004-06-01

    In the present work, dipole defects in γ-irradiated and thermally treated samples of Al 2O 3 and MgAl 2O 4 oxides are investigated, applying the thermally stimulated depolarisation currents technique (TSDC). The TSDC spectra of MgAl 2O 4 doped with Fe 2+, Fe 3+, Co 2+, Cr 3+ and Mn 2+ show four bands at 130 K, 160 K, 250 K and 320 K, and the spectra of Al 2O 3 doped with Mg 2+, Cr 3+ and Fe 3+ show bands between 230 K and 260 K. It has been observed that the bands at 130 K, 160 K and 250 K in MgAl 2O 4 spinel and that the 230 K and 240 K bands in Al 2O 3 are related to dipole defects. The other bands are possibly related to different types of charge storage mechanisms (space-charge and interfacial polarisation) or deal with distributions in activation energies and/or in relaxation times. A thermal decrease of the TSDC bands for heat treatments above 1000 K has been observed. In MgAl 2O 4 spinel, the 250 K band could be recovered after γ-irradiation and the two dipole peaks in Al 2O 3 were partially recovered. Thermal treatments affect the dipole aggregation processes in both oxides. Optical absorption (AO) results indicate that the presence of bands of water molecules in the infrared region obstructs the appearance of the TSDC bands in both Al 2O 3 and MgAl 2O 4. The 250 K peak in MgAl 2O 4 was correlated to V-type centres and the 250 K peak in Al 2O 3 to a substitutional Mg 2+ ion near a trapped hole localised on an adjacent oxygen ion.

  5. The growth of high-Al-content InAlGaN quaternary alloys by RF-MBE

    NASA Astrophysics Data System (ADS)

    Wang, B. Z.; Wang, X. L.; Wang, X. Y.; Guo, L. C.; Wang, X. H.; Xiao, H. L.; Liu, H. X.

    2007-02-01

    High-Al-content InxAlyGa1-x-yN (x = 1-10%, y = 34-45%) quaternary alloys were grown on sapphire by radio-frequency plasma-excited molecular beam epitaxy. Rutherford back-scattering spectrometry, high resolution x-ray diffraction and cathodoluminescence were used to characterize the InAlGaN alloys. The experimental results show that InAlGaN with an appropriate Al/In ratio (near 4.7, which is a lattice-match to the GaN under-layer) has better crystal and optical quality than the InAlGaN alloys whose Al/In ratios are far from 4.7. Some cracks and V-defects occur in high-Al/In-ratio InAlGaN alloys. In the CL image, the cracks and V-defect regions are the emission-enhanced regions.

  6. Preparation, deformation, and failure of functional Al-Sn and Al-Sn-Pb nanocrystalline alloys

    NASA Astrophysics Data System (ADS)

    Noskova, N. I.; Vil'Danova, N. F.; Filippov, Yu. I.; Churbaev, R. V.; Pereturina, I. A.; Korshunov, L. G.; Korznikov, A. V.

    2006-12-01

    Changes in the structure, hardness, mechanical properties, and friction coefficient of Al-30% Sn, Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb (wt %) alloys subjected to severe plastic deformation by equal-channel angular pressing (with a force of 40 tonne) and by shear at a pressure of 5 GPa have been studied. The transition into the nanocrystalline state was shown to occur at different degrees of plastic deformation. The hardness exhibits nonmonotonic variations, namely, first it increases and subsequently decreases. The friction coefficient of the Al-30% Sn, Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb alloys quenched from the melt was found to be 0.33; the friction coefficients of these alloys in the submicrocrystalline state (after equal-channel angular pressing) equal 0.24, 0.32, and 0.35, respectively. The effect of disintegration into nano-sized powders was found to occur in the Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb alloys after severe plastic deformation to ɛ = 6.4 and subsequent short-time holding.

  7. Temperature dependence of the dielectric response of anodized Al-Al2O3-metal capacitors

    NASA Astrophysics Data System (ADS)

    Hickmott, T. W.

    2003-03-01

    The temperature dependence of capacitance, CM, and conductance, GM, of Al-Al2O3-metal capacitors with Cu, Ag, and Au electrodes has been measured between 100 and 340 K at seven frequencies between 10 kHz and 1 MHz. Al2O3 films between 15 and 64 nm thick were formed by anodizing evaporated Al films in borate-glycol or borate-H2O electrolyte. The interface capacitance at the Al2O3-metal interface, CI, which is in series with the capacitance CD due to the Al2O3 dielectric, is determined from plots of 1/CM versus insulator thickness. CI is not fixed for a given metal-insulator interface but depends on the vacuum system used to deposit the metal electrode. CI is nearly temperature independent. When CI is taken into account the dielectric constant of Al2O3 determined from capacitance measurements is ˜8.3 at 295 K. The dielectric constant does not depend on anodizing electrolyte, insulator thickness, metal electrode, deposition conditions for the metal electrode or measurement frequency. By contrast, GM of Al-Al2O3-metal capacitors depends on both the deposition conditions of the metal and on the metal. For Al-Al2O3-Cu capacitors, GM is larger for capacitors with large values of 1/CI that result when Cu is evaporated in an oil-pumped vacuum system. For Al-Al2O3-Ag capacitors, GM does not depend on the Ag deposition conditions.

  8. From Snow to Hill to ALS: An epidemiological odyssey in search of ALS causation.

    PubMed

    Armon, Carmel

    2018-05-21

    Establishing mechanisms of disease causation in neurodegenerative diseases has long seemed to be beyond the pale of traditional epidemiological tools. Establishing a plausible mechanism for initiation of amyotrophic lateral sclerosis (ALS) has appeared a particularly elusive goal. This review shows that a likely mechanism for ALS initiation may be inferred by applying classical methods of epidemiological inference. Advances in characterizing the biology of ALS suggest that most cases of ALS are cortically-generated, part of the ALS-FTD spectrum, with focal onset and spread by contiguity within the motor super-network. Evidence-based methods identified the most credible exogenous risk factor - smoking. AB Hill's nine viewpoints to inferring causation from association were invoked. The most likely mechanism consistent with smoking being a risk factor for ALS was inferred: cumulative DNA damage, akin to cumulative somatic mutations in carcinogenesis. Focal onset supports the concept that these changes, occurring in a single cell, may trigger the cascade leading to clinical ALS. The plausibility of this mechanism was affirmed by its coherence/consistency with other observations in sporadic, familial and western Pacific ALS. Application of traditional epidemiological reasoning suggests that cumulative DNA damage may contribute to disease onset in ALS. Copyright © 2018 Elsevier B.V. All rights reserved.

  9. Polarization and Fowler-Nordheim tunneling in anodized Al-Al2O3-Au diodes

    NASA Astrophysics Data System (ADS)

    Hickmott, T. W.

    2000-06-01

    Polarization in anodic Al2O3 films is measured by using quasi-dc current-voltage (I-V) curves of Al-Al2O3-Au diodes. A reproducible polarization state is established by applying a negative voltage to the Au electrode of a rectifying Al-Al2O3-Au diode. The difference between subsequent I-V curves with Au positive is a measure of polarization in the sample. The magnitude of polarization charge in Al2O3 depends on the anodizing electrolyte. Al2O3 films formed in H2O-based electrolytes have approximately ten times the polarization charge of Al2O3 films formed in ethylene glycol-based electrolyte. Anodizing conditions that produce greater polarizing charge in anodic Al2O3 result in voltage-time curves during anodization under galvanostatic conditions that are nonlinear. Anodic films with greater polarizing charge also have a greater apparent interface capacitance which is independent of Al2O3 thickness. I-V curves of Al-Al2O3-Au diodes for increasing voltage are dominated by polarization. I-V curves for decreasing voltage are reproducible and parallel but depend on the maximum current and voltage reached during the measurement. There is no single current corresponding to a given voltage. I-V curves for decreasing voltage are analyzed assuming that the conduction mechanism is Fowler-Nordheim (FN) tunneling. There is a qualitative difference between the FN tunneling parameters for Al2O3 films formed in H2O-based electrolytes and those formed in ethylene glycol-based electrolyte. For the former the value of the exponential term in the FN analysis increases as the value of maximum voltage and current in an I-V characteristic increases, while the value of the pre-exponential term is nearly constant. For the latter, the exponential term is nearly constant as maximum voltage and current increase, but the pre-exponential term decreases by about 5 decades. Thus polarization charge incorporated during formation of anodized Al2O3 strongly affects the formation of the insulating

  10. CuAlO2 and CuAl2O4 thin films obtained by stacking Cu and Al films using physical vapor deposition

    NASA Astrophysics Data System (ADS)

    Castillo-Hernández, G.; Mayén-Hernández, S.; Castaño-Tostado, E.; DeMoure-Flores, F.; Campos-González, E.; Martínez-Alonso, C.; Santos-Cruz, J.

    2018-06-01

    CuAlO2 and CuAl2O4 thin films were synthesized by the deposition of the precursor metals using the physical vapor deposition technique and subsequent annealing. Annealing was carried out for 4-6 h in open and nitrogen atmospheres respectively at temperatures of 900-1000 °C with control of heating and cooling ramps. The band gap measurements ranged from 3.3 to 4.5 eV. Electrical properties were measured using the van der Pauw technique. The preferred orientations of CuAlO2 and CuAl2O4 were found to be along the (1 1 2) and (3 1 1) planes, respectively. The phase percentages were quantified using a Rietveld refinement simulation and the energy dispersive X-ray spectroscopy indicated that the composition is very close to the stoichiometry of CuAlO2 samples and with excess of aluminum and deficiency of copper for CuAl2O4 respectively. High resolution transmission electron microscopy identified the principal planes in CuAlO2 and in CuAl2O4. Higher purities were achieved in nitrogen atmosphere with the control of the cooling ramps.

  11. Three-Dimensional FIB/EBSD Characterization of Irradiated HfAl3-Al Composite

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hua, Zilong; Guillen, Donna Post; Harris, William

    2016-09-01

    A thermal neutron absorbing material, comprised of 28.4 vol% HfAl3 in an Al matrix, was developed to serve as a conductively cooled thermal neutron filter to enable fast flux materials and fuels testing in a pressurized water reactor. In order to observe the microstructural change of the HfAl3-Al composite due to neutron irradiation, an EBSD-FIB characterization approach is developed and presented in this paper. Using the focused ion beam (FIB), the sample was fabricated to 25µm × 25µm × 20 µm and mounted on the grid. A series of operations were carried out repetitively on the sample top surface tomore » prepare it for scanning electron microscopy (SEM). First, a ~100-nm layer was removed by high voltage FIB milling. Then, several cleaning passes were performed on the newly exposed surface using low voltage FIB milling to improve the SEM image quality. Last, the surface was scanned by Electron Backscattering Diffraction (EBSD) to obtain the two-dimensional image. After 50 to 100 two-dimensional images were collected, the images were stacked to reconstruct a three-dimensional model using DREAM.3D software. Two such reconstructed three-dimensional models were obtained from samples of the original and post-irradiation HfAl3-Al composite respectively, from which the most significant microstructural change caused by neutron irradiation apparently is the size reduction of both HfAl3 and Al grains. The possible reason is the thermal expansion and related thermal strain from the thermal neutron absorption. This technique can be applied to three-dimensional microstructure characterization of irradiated materials.« less

  12. Enquete sur les aspects toxicologiques de la phytotherapie utilisee par un herboriste à Fes, Maroc

    PubMed Central

    Zeggwagh, Ali Amine; Lahlou, Younes; Bousliman, Yassir

    2013-01-01

    Introduction Dans le but d'étudier l'aspect toxicologique des plantes médicinales utilisées en médecine traditionnelle, une étude ethnobotanique a été réalisée à la ville de Fès au centre du Maroc. Méthodes Ont été inclus dans l'étude tous les patients ayant bénéficié d'une prescription par l'herboriste de plantes à visée thérapeutique. La discussion de nos résultats s'est faite sur la base d'une revue de la littérature avec identification des principales plantes toxiques utilisées en phytothérapie au Maroc. L'approche bibliographique a permis de compléter les informations. Résultats L'âge moyen des patients traités par des plantes (38 femmes, 32 hommes) était de 35 ± 18 ans. L'enquête ethnobotanique à révélé que la majorité des plantes médicinales étaient utilisées contre les affections urinaires (21%), suivi des maladies de l'appareil digestif (19.6%) et des maladies rhumatologiques (18.2%). Le nombre de plantes prescrits par l'herboriste a été de 53 dont 5 sont potentiellement toxiques. L'identification taxonomique des plantes prescrites a recensé 30 familles dont les plus représentées sont les Lamiaceae (23.33%), les Apiaceae (13,33%) et les Asteraceae (10%). La prescription des plantes considérées comme toxiques a concerné 7,1% des consultants traités par les plantes médicinales. Aucune complication inhérente aux plantes prescrites n'a été déplorée. Conclusion Malgré les résultats encourageants de notre enquête sur le compte de la phytothérapie, la pratique de la phytothérapie est laissée à la vulgarisation et à l'oubli scientifique, législatif et universitaire. PMID:23734270

  13. The Genyornis Egg: Response to Miller et al.'s commentary on Grellet-Tinner et al., 2016

    NASA Astrophysics Data System (ADS)

    Grellet-Tinner, Gerald; Spooner, Nigel A.; Handley, Warren D.; Worthy, Trevor H.

    2017-04-01

    Williams (1981) and Williams and Rich (1991) attributed Australian Quaternary fossil eggshell that differed from that of emu Dromaius novaehollandiae to the extinct bird Genyornis newtoni without any osteological or embryonic support. Such association by proximity or abundance mirrors the case of the mistaken association of oviraptor eggs to Protoceratops in the 1920's by Andrews (Grellet-Tinner and Makovicky, 2006). No other candidate species was considered, and this attribution has been unchallenged and followed by everyone thereafter. Much research has been done on this Australian eggshell, with one result being that the extinction of the parent of this eggshell is the most well documented for a taxon in Australia (e.g., Miller et al., 1999, 2005). Grellet-Tinner et al. (2016) raised several problems with the identity of the eggshell Williams (1981) attributed to Genyornis newtoni and suggested that extinct megapodes of the genus Progura were the more likely layer of this eggshell type, therein referred to as ;putative Genyornis oological material; (PGOM). Miller et al. (2017) challenged our hypothesis stating that ;Based on the dimensions of the reconstructed Spooner Egg,Grellet-Tinner et al. (2016)argue that PGOM is too small for a bird with the body mass estimated for Genyornis (168-275 kg) … …[and] …. None of the additional PGOM observations reported byGrellet-Tinner et al. (2016)are inconsistent with a Genyornis parent;. Here we take the opportunity to respond to their critique, the basis of which resolves into a few points, which we address in turn.

  14. Mowafak Al-Jassim | NREL

    Science.gov Websites

    Mowafak Al-Jassim Photo of Mowafak Al-Jassim Mowafak Al-Jassim Group Research Manager III-Materials researcher and advancing to a principal scientist and a technical manager. His research group has contributed numerous international conferences. Research Interests His research interests include the multiscale

  15. Data supporting Al-Abed et al., Environ. Sci.: Nano, 2016,

    EPA Pesticide Factsheets

    Data files representing each of the Figures and Tables published in Al-Abed et al., Environ. Sci.: Nano, 2016,3, 593. The data file names identify the Figure or Table and each file contains an internal set of data definitionsThis dataset is associated with the following publication:Al-Abed, S.R., J. Virkutyte, J. Ortenzio , R.M. McCarrick, L. Degn, R. Zucker , N. Coates , K. Cleveland, H. Ma, S. Diamond, K. Dreher , and W. Boyes. Environmental aging alters AI(OH)3 coating of TiO2 nanoparticles enhancing their photocatalytic and phototoxicity activities. Environmental Science: Nano. RSC Publishing, Cambridge, UK, N/A, (2016).

  16. Two-Phase (TiAl+TiCrAl) Coating Alloys for Titanium Aluminides

    NASA Technical Reports Server (NTRS)

    Brady, Michael P. (Inventor); Smialek, James L. (Inventor); Brindley, William J. (Inventor)

    1998-01-01

    A coating for protecting titanium aluminide alloys, including the TiAl gamma + Ti3Al (alpha(sub 2)) class, from oxidative attack and interstitial embrittlement at temperatures up to at least 1000 C. is disclosed. This protective coating consists essentially of titanium, aluminum. and chromium in the following approximate atomic ratio: Ti(41.5-34.5)Al(49-53)Cr(9.5-12.5)

  17. Rehabilitation of a 410-MW utility boiler at Costa Sur, Puerto Rico

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosado, R.; Salmeron, M.

    1995-12-31

    To increase unit reliability and availability and to meet the current and future electric power demands in Puerto Rico, the Puerto Rico Electric Power Authority (PREPA) recently performed a scheduled outage rehabilitation of Costa Sur Power Station Unit 5. This major rehabilitation of a 23-year-old, 410 MW, oil-fired boiler was accompanied by the upgrading of the low-pressure turbine with new rotors. The boiler rehabilitation included the replacement of all waterwall floor panels from just below the burner windbox, down to the lower drum. Temporary support was provided for the lower drum and its structural system during the panel replacement. Themore » steam drum internals were completely rehabilitated, with the installation of a new liner and cleaning and repair of other internals as required. The superheater and reheater desuperheater liners were also replaced. In addition, all major components of both the firing system and the air preheaters were replaced. The gas recirculation fan was rehabilitated, and its discharge duct was replaced.« less

  18. Al Qaeda in the Arabian Peninsula (AQAP): An Al Qaeda Affiliate Case Study

    DTIC Science & Technology

    2017-10-01

    Underwear Bombing ” and an unsuccessful 2010 plan to put parcel bombs on U.S.-bound airplanes. AQAP also seeks to inspire “lone jihad” attacks in the... bomb -maker,5 and Sudanese national Ibrahim al-Qosi, a former bookkeeper for Osama Bin Laden.6 Below the emir are regional commanders and heads of...5 “Profile: Al-Qaeda ‘ Bomb Maker’ Ibrahim al-Asiri,” BBC News, July 4, 2014, http://www.bbc.com/news/world-middle-east-11662143. See also al-Asiri

  19. Etude de l'impact de la valorisation energetique de pneus hors d'usage, dans une cimenterie, sur les emissions gazeuses par modelisation de la dispersion atmospherique

    NASA Astrophysics Data System (ADS)

    Bredin, Nathalie

    La génération incéssante de déchets nécessite le développement de nouvelles technologies, telle que la valorisation énergétique, pour en disposer. Une filière appropriée pour valoriser énergétiquement les déchets est le procédé cimentier. L'industrie du ciment est une des grandes consommatrices d'énergie. La température nécessaire à la préparation du ciment se situe aux environs de 1450°C pour faire réagir la matière première (cru) qui est sous forme poudreuse et constituée principalement de roches calcaires, argileuses, schisteuses,... Les gaz de combustion ont un long temps de résidence dans les fours. De plus, le mode de fonctionnement des fours est responsable d'un effet de lessivage des gaz acides par le cru alcalin. Ces propriétés font du procédé cimentier un bon candidat pour la valorisation énergétique des déchets. Les déchets interessants pour les cimenteries sont, entre autres, les huiles usées, les solvants usés et les pneus usés qui ont un pouvoir calorifique équivalent à celui du charbon. Les rejets à l'atmosphère des cimenteries sont principalement des émissions gazeuses. Ainsi, l'impact de la valorisation de pneus usés sur les émissions gazeuses de la cimenterie Saint-Laurent de Joliette a été étudié, à l'aide de l'outil qu'est la modélisation de la dispersion atmosphérique. Le modèle utilisé ISC-ST2, Industrial Source Complex-Short Term, est de type gaussien. L'analyse des concentrations maximales horaires et moyennes sur différentes périodes de temps (1 heure, 8 heures, ..., 1 an) des émissions gazeuses dans l'air ambiant montre que celles-ci sont en deçà des normes émises par le gouvernement québécois et par la Communauté Urbaine de Montréal. L'étude de la distribution géographique des polluants, d'après les concentrations annuelles, dans un rayon de 5 km autour de la cimenterie montre que le fait d'utiliser des pneus comme combustible de substitution n'a qu'un faible impact sur la

  20. Sur la modélisation des supraconducteurs : le ``modèle de l'état critique'' de Bean, en trois dimensions

    NASA Astrophysics Data System (ADS)

    Bossavit, A.

    1993-03-01

    Macroscopic modelling of superconductors demands a substitution of some nonlinear behavior law for Ohm's law. For this, a version of Bean's “critical state” model, derived from the setting of a convex functional of the current density field, valid in dimension 3 without any previous assumption about the direction of currents, is proposed. It is shown how two standard three-dimensional finite element methods (“h-formulation” and “e-formulation”), once fitted with this model, can deal with situations were superconductors are present. La modélisation macroscopique des supraconducteurs suppose le remplacement de la loi d'Ohm par une loi de comportement non linéaire adéquate. On présente à cet effet une version du “modèle de Bean”, ou modèle de l'état critique, basée sur la construction d'une certaine fonctionnelle convexe du champ des densités de courant, qui est valable en dimension 3 sans hypothèses préalables sur la direction des courants. On montre comment adapter deux méthodes standards de calcul de courants de Foucault par élérnents finis en trois dimensions (“en h” et “en e”) à la présence de supraconducteurs, en incorporant ce modèle.

  1. L'endométriose périnéale profonde sur cicatrice d’épisiotomie: à propos d'un cas rare

    PubMed Central

    Laadioui, Meriem; Alaoui, Fdili; Jayi, Sofia; Bouguern, Hakima; Chaara, Hikmat; Melhouf, Moulay Aabdelilah

    2013-01-01

    Parmi les localisations rares de l'endométriose sur cicatrice, celle du périnée demeure exceptionnelle, l'origine en est souvent iatrogène (épisiotomie). Nous rapportons le cas d'une patiente présentant une douleur cyclique, au niveau de la cicatrice d’épisiotomie. Avec à l'examen clinique une masse de 3,5 cm de grand diamètre au niveau de la cicatrice d’épisiotomie. L’écho périnéale a objectivé une image hypoéchgène hétérogène non vascularisée en regard de la cicatrice d’épisiotomie faisant 3,23/1cm. L'excision de la lésion a été réalisée et l’étude anatomopathologique a confirmé le diagnostic d'endométriose. Les suites postopératoires étaient simples avec un recul de 3 mois sans récidive de la douleur ni de la masse. A travers notre cas et une revue de la littérature, nous insistons sur les la nécessité du diagnostic clinique et d'une prise en charge précoce en vue d'améliorer le pronostic de cette entité rare. PMID:24778749

  2. Screw dislocation-induced growth spirals as emissive exciton localization centers in Al-rich AlGaN/AlN quantum wells

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Funato, Mitsuru, E-mail: funato@kuee.kyoto-u.ac.jp; Banal, Ryan G.; Kawakami, Yoichi

    2015-11-15

    Screw dislocations in Al-rich AlGaN/AlN quantum wells cause growth spirals with an enhanced Ga incorporation, which create potential minima. Although screw dislocations and their surrounding potential minima suggest non-radiative recombination processes within growth spirals, in reality, screw dislocations are not major non-radiative sinks for carriers. Consequently, carriers localized within growth spirals recombine radiatively without being captured by non-radiative recombination centers, resulting in intense emissions from growth spirals.

  3. Transformation to Ni5Al3 in a 63.0 at. pct Ni-Al alloy

    NASA Technical Reports Server (NTRS)

    Khadkikar, P. S.; Locci, I. E.; Vedula, K.; Michal, G. M.

    1993-01-01

    Microstructures of 63 at. pct P/M Ni-Al alloys with a composition close to the stoichiometry of the Ni5Al3 phase were investigated using homogenized and quenched specimens aged at low temperatures for various times. Results of analyses of XRD data and electron microscopy observations were used for quantitative phase analysis, performed to calculate the (NiAl + Ni5Al3)/Ni5Al3 phase boundary locations. The measured lattice parameters of Ni5Al3 phase formed at 823, 873, and 923 K indicated an increase in tetragonality of the phase with increasing nickel content.

  4. Formation of Al3Ti/Mg composite by powder metallurgy of Mg-Al-Ti system.

    PubMed

    Yang, Zi R; Qi Wang, Shu; Cui, Xiang H; Zhao, Yu T; Gao, Ming J; Wei, Min X

    2008-07-01

    An in situ titanium trialuminide (Al 3 Ti)-particle-reinforced magnesium matrix composite has been successfully fabricated by the powder metallurgy of a Mg-Al-Ti system. The reaction processes and formation mechanism for synthesizing the composite were studied by differential scanning calorimetry (DSC), x-ray diffractometry (XRD), scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS). Al 3 Ti particles are found to be synthesized in situ in the Mg alloy matrix. During the reaction sintering of the Mg-Al-Ti system, Al 3 Ti particles are formed through the reaction of liquid Al with as-dissolved Ti around the Ti particles. The formed intermetallic particles accumulate at the original sites of the Ti particles. As sintering time increases, the accumulated intermetallic particles disperse and reach a relatively homogeneous distribution in the matrix. It is found that the reaction process of the Mg-Al-Ti system is almost the same as that of the Al-Ti system. Mg also acts as a catalytic agent and a diluent in the reactions and shifts the reactions of Al and Ti to lower temperatures. An additional amount of Al is required for eliminating residual Ti and solid-solution strengthening of the Mg matrix.

  5. Bulk Al-Al3Zr composite prepared by mechanical alloying and hot extrusion for high-temperature applications

    NASA Astrophysics Data System (ADS)

    Pourkhorshid, E.; Enayati, M. H.; Sabooni, S.; Karimzadeh, F.; Paydar, M. H.

    2017-08-01

    Bulk Al/Al3Zr composite was prepared by a combination of mechanical alloying (MA) and hot extrusion processes. Elemental Al and Zr powders were milled for up to 10 h and heat treated at 600°C for 1 h to form stable Al3Zr. The prepared Al3Zr powder was then mixed with the pure Al powder to produce an Al-Al3Zr composite. The composite powder was finally consolidated by hot extrusion at 550°C. The mechanical properties of consolidated samples were evaluated by hardness and tension tests at room and elevated temperatures. The results show that annealing of the 10-h-milled powder at 600°C for 1 h led to the formation of a stable Al3Zr phase. Differential scanning calorimetry (DSC) results confirmed that the formation of Al3Zr began with the nucleation of a metastable phase, which subsequently transformed to the stable tetragonal Al3Zr structure. The tension yield strength of the Al-10wt%Al3Zr composite was determined to be 103 MPa, which is approximately twice that for pure Al (53 MPa). The yield stress of the Al/Al3Zr composite at 300°C is just 10% lower than that at room temperature, which demonstrates the strong potential for the prepared composite to be used in high-temperature structural applications.

  6. On the Solar Stimuli That Initiate Makkah Al Mukaramah, Al-Madinah Al-Munawarah And Jeddah Flash Floods

    NASA Astrophysics Data System (ADS)

    Elfaki, H.; Yousef, S.; Mawad, Ramy; Algafari, Y. H. O.; Amer, M.; Abdel-Sattar, W.

    2017-12-01

    Severe solar events manifested as highly energetic X-Ray events accompanied by coronal mass ejections ( CMEs) and proton flares caused flash floods in Makkah Al-Mukaramah, Al-Madinah Al-Munawarah and Jeddah. In the case of the 20 January 2005 CME that initiated severe flash on the 22 of January. it is shown that the CME lowered the pressure in the polar region and extended the low pressure regime to Saudi Arabia passing by the Mediterranean. Such passage accelerated evaporation and caused Cumulonimbus clouds to form and discharge flash floods over Makkah Al-Mukaramah. On the other hand, solar forcing due coronal holes have a different technique in initiating flash floods. The November 25 2009 and the 13-15 January 2011 Jeddah flash floods are attributed to prompt events due to fast solar streams emanated from two coronal holes that arrived the Earth on 24 November 2009 and 13 January 2011. We present evidences that those streams penetrated the Earth's magnetosphere and hit the troposphere at the western part of the Red Sea, dissipated their energy at 925mb geopotential height and left two hot spots. It follows that the air in the hot spots expanded and developed spots of low pressure air that spread over the Red Sea to its eastern coast. Accelerated evaporation due to reduced pressure caused quick formation of Cumulonimbus clouds that caused flash floods over Makkah Al-Mukaramah and Jeddah.

  7. Ultrafast decay of hot phonons in an AlGaN/AlN/AlGaN/GaN camelback channel

    NASA Astrophysics Data System (ADS)

    Leach, J. H.; Wu, M.; Morkoç, H.; Liberis, J.; Šermukšnis, E.; Ramonas, M.; Matulionis, A.

    2011-11-01

    A bottleneck for heat dissipation from the channel of a GaN-based heterostructure field-effect transistor is treated in terms of the lifetime of nonequilibrium (hot) longitudinal optical phonons, which are responsible for additional scattering of electrons in the voltage-biased quasi-two-dimensional channel. The hot-phonon lifetime is measured for an Al0.33Ga0.67N/AlN/Al0.1Ga0.9N/GaN heterostructure where the mobile electrons are spread in a composite Al0.1Ga0.9N/GaN channel and form a camelback electron density profile at high electric fields. In accordance with plasmon-assisted hot-phonon decay, the parameter of importance for the lifetime is not the total charge in the channel (the electron sheet density) but rather the electron density profile. This is demonstrated by comparing two structures with equal sheet densities (1 × 1013 cm-2), but with different density profiles. The camelback channel profile exhibits a shorter hot-phonon lifetime of ˜270 fs as compared with ˜500 fs reported for a standard Al0.33Ga0.67N/AlN/GaN channel at low supplied power levels. When supplied power is sufficient to heat the electrons > 600 K, ultrafast decay of hot phonons is observed in the case of the composite channel structure. In this case, the electron density profile spreads to form a camelback profile, and hot-phonon lifetime reduces to ˜50 fs.

  8. Enhancing phosphate adsorption by Mg/Al layered double hydroxide functionalized biochar with different Mg/Al ratios.

    PubMed

    Li, Ronghua; Wang, Jim J; Zhou, Baoyue; Awasthi, Mukesh Kumar; Ali, Amjad; Zhang, Zengqiang; Gaston, Lewis A; Lahori, Altaf Hussain; Mahar, Amanullah

    2016-07-15

    Mg/Al ratio plays a significant role for anion adsorption by Mg/Al-layered double hydroxides (Mg/Al-LDHs) modified biochar. In this study, Mg/Al-LDHs biochar with different Mg/Al ratios (2, 3, 4) were prepared by co-precipitation for phosphate removal from aqueous solution. Factors on phosphate adsorption including Mg/Al ratio, pH, and the presence of other inorganic anions were investigated through batch experiments. Increasing Mg/Al ratio in the Mg/Al-LDHs biochar composites generally enhanced phosphate adsorption with Langmuir adsorption maximum calculated at 81.83mg phosphorous (P) per gram of 4:1Mg/Al-LDHs biochar at pH3.0. The adsorption process was best described by the pseudo-second-order kinetic model. Solution pH had greater effects on the phosphate adsorption by Mg/Al LDHs biochar composites with lower Mg/Al ratios. The presence of other inorganic anions decreased the phosphate adsorption efficiency in the order of F(-) > SO4(2-) > NO2(-) >Cl(-). Phosphate adsorption mechanism involves ion exchange, electrostatic attraction and surface inner-sphere complex formation. Overall, Mg/Al-LDHs biochar composites offer a potential alternative of carbon-based adsorbent for phosphate removal from aqueous solution. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Electronic structures of Al-Si clusters and the magic number structure Al8Si4

    NASA Astrophysics Data System (ADS)

    Du, Ning; Su, Mingzhi; Chen, Hongshan

    2018-02-01

    The low-energy structures of Al8Sim (m = 1-6) have been determined by using the genetic algorithm combined with density functional theory and the Second-order Moller-Plesset perturbation theory (MP2) models. The results show that the close-packed structures are preferable in energy for Al-Si clusters and in most cases there exist a few isomers with close energies. The valence molecular orbitals, the orbital level structures and the electron localisation function (ELF) consistently demonstrate that the electronic structures of Al-Si clusters can be described by the jellium model. Al8Si4 corresponds to a magic number structure with pronounced stability and large energy gap; the 40 valence electrons form closed 1S21P61D102S21F142P6 shells. The ELF attractors also suggest weak covalent Si-Si, Si-Al and Al-Al bonding, and doping Si in aluminium clusters promotes the covalent interaction between Al atoms.

  10. Sintering of (Ni,Mg)(Al,Fe)2O4 Materials and their Corrosion Process in Na3AlF6-AlF3-K3AlF6 Electrolyte

    NASA Astrophysics Data System (ADS)

    Xu, Yibiao; Li, Yawei; Yang, Jianhong; Sang, Shaobai; Wang, Qinghu

    2017-06-01

    The application of ledge-free sidewalls in the Hall-Héroult cells can potentially reduce the energy requirement of aluminum production by about 30 pct (Nightingale et al. in J Eur Ceram, 33:2761-2765, 2013). However, this approach poses great material challenges since such sidewalls are in direct contact with corrosive electrolyte. In the present paper, (Ni,Mg)(Al,Fe)2O4 materials were prepared using fused magnesia, reactive alumina, nickel oxide, and iron oxide powders as the starting materials. The sintering behaviors of specimens as well as their corrosion resistance to molten electrolyte have been investigated by means of X-ray diffraction and scanning electron microscope. The results show that after firing at temperature ranging from 1673 K (1400 °C) up to 1873 K (1600 °C), all the specimens prepared are composed of single-phase (Ni,Mg)(Al,Fe)2O4 composite spinel, the lattice parameter of which increases with increasing Fe3+ ion concentration. Increasing the iron oxide content enhances densification of the specimens, which is accompanied by the formation of homogeneously distributed smaller pores in the matrix. The corrosion tests show that corrosion layers consist of fluoride and Ni(Al,Fe)2O4 composite spinel grains are produced in specimens with Fe/Al mole ratio no more than 1, whereas dense Ni(Al,Fe)2O4 composite spinel layers are formed on the surface of the specimens with Fe/Al mole ratio more than 1. The dense Ni(Al,Fe)2O4 composite spinel layers formed improve the corrosion resistance of the specimens by inhibiting the infiltration of electrolyte and hindering the chemical reaction between the specimen and electrolyte.

  11. La violence sur les réseaux canadiens de télévision

    PubMed Central

    Paquette, Guy

    2003-01-01

    La question des effets de la violence à la télévision occupe une place très importante dans l’opinion publique depuis les vingt dernières années, et des centaines d’études y ont été consacrées. Plusieurs chercheurs concluent à une influence négative de cette violence sur le comportement. Le public, les diffuseurs et les autorités politiques ont tous endossé l’idée de réduire la quantité totale de violence présentée au petit écran – en particulier dans les émissions accessibles aux enfants. Nous avons analysé un millier d’émissions de fiction présentées entre 1993 et 2001 sur les principaux réseaux généralistes de télévision au Canada : TVA et TQS ainsi que CTV et Global pour les réseaux privés français et anglais, ainsi que Radio-Canada français et anglais pour les réseaux publics. La méthodologie utilisée est l’analyse de contenu classique, où l’acte de violence constitue l’unité d’analyse. Les données recueillies démontrent que la quantité de violence a augmenté régulièrement depuis 1993, malgré la volonté affirmée des télédiffuseurs de présenter une programmation moins violente. C’est le cas du nombre brut d’actes et du nombre d’actes à l’heure, qui est lui aussi en forte croissance. Les réseaux privés véhiculent trois fois plus de violence que les réseaux publics. On constate également qu’une très forte proportion d’actes de violence figure dans des émissions qui commencent avant 21 h, et que de nombreux enfants y sont probablement exposés. Nous signalons finalement la place de plus en plus importante occupée par la violence psychologique. PMID:20020031

  12. Mise à jour technique sur la physiologie et l'évaluation du liquide amniotique.

    PubMed

    Lim, Kenneth I; Butt, Kimberly; Naud, Kentia; Smithies, Mila

    2017-01-01

    RéSULTATS: SOURCES DES DONNéES PROBANTES: Nous avons effectué une recherche sur MEDLINE et Kfinder pour trouver des articles pertinents, puis avons examiné les bibliographies des articles retenus, notamment des revues Cochrane et des articles de revue récents. Les données recueillies ont été analysées par le Comité d'imagerie diagnostique de la Société des obstétriciens et gynécologues du Canada. Les recommandations ont été classées selon les critères établis par le Groupe d'étude canadien sur les soins de santé préventifs (Tableau 1). AVANTAGES, DéSAVANTAGES ET COûTS: En obstétrique moderne, l'évaluation du volume de liquide amniotique par échographie fait partie intégrante de l'évaluation fœtale. Toute anomalie donne lieu à une intervention obstétricale et à des examens approfondis. Au Canada, il n'existe aucune définition normalisée associée à l'estimation du volume de liquide amniotique ni aucune approche d'évaluation uniforme. Plusieurs essais randomisés semblent indiquer que l'évaluation de poche unique, plutôt que de plusieurs poches (indice de liquide amniotique), diminue les interventions obstétricales sans augmenter l'incidence de résultats indésirables. La littérature récente laisse croire que des changements légers, mais détectables du liquide amniotique peuvent survenir une heure ou deux suivant des manœuvres physiologiques normales, ce qui pourrait expliquer la variabilité et le manque de cohérence des résultats d'évaluations répétées en peu de temps et ainsi créer de la confusion et donner lieu à d'autres examens. Le présent article vise à décrire les limites de l'évaluation du volume de liquide amniotique, à promouvoir une méthode d'évaluation normalisée et à proposer un ensemble commun de définitions. DéCLARATIONS SOMMAIRES: RECOMMANDATION. Copyright © 2017. Published by Elsevier Inc.

  13. Relationship between Al content and substitution mechanism of Al-bearing anhydrous bridgmanites

    NASA Astrophysics Data System (ADS)

    Noda, M.; Inoue, T.; Kakizawa, S.

    2017-12-01

    It is considered that two substitution mechanisms, Tschermak substitution and oxygen vacancy substitution, exist in MgSiO3 bridgmanite for the incorporation of Al in anhydrous condition. Kubo and Akaogi (2000) has conducted the phase equilibrium experiment in the system MgSiO3-Al2O3, and established the phase diagram up to 28 GPa. However the careful observation in the bridgmanite shows that the chemical compositions are slightly deviated from Tschermak substitution join. The same tendency can be also observed in the run products by Irifune et al. (1996). This result indicates that pure Tschermak substitution bridgmanite cannot be stable even in the MgSiO3-Al2O3 join experiment. However, the previous studies used powder samples as the starting materials, so the absorbed water may affect the results. Therefore, we tried to conduct the experiment in the join MgSiO3-Al2O3 in extremely anhydrous condition to clarify whether the pure Tschermak substitution bridgmanite can be stable or not. In addition, we also examined the stability of oxygen vacancy bridgmanite in the extremely anhydrous condition for the comparison. The high pressure synthesis experiments were conducted at 28 GPa and 1600-1700° for 1hour using a Kawai-type multi-anvil apparatus. Four different Al content samples were prepared as the starting materials along the ideal substitution line of Tschermak (Al=0.025, 0.05, 0.1, 0.15 mol) and oxygen-vacancy (Al=0.025, 0.05, 0.075, 0.1 mol) substitutions, respectively (when total cation of 2). The glass rods were used as the starting materials to eliminate the absorbed water on the sample surface. The chemical compositions of the synthesized bridgmanite could not be measured by EPMA because of small grain size less than submicron. Therefore the chemical compositions were estimated from the result of the XRD pattern by subtracting the amount of the other phases. The estimated chemical compositions of Tschermak substitution bridgmanites were consistent with the

  14. Acoustic resonator with Al electrodes on an AlN layer and using a GaAs substrate

    DOEpatents

    Kline, Gerald R.; Lakin, Kenneth M.

    1985-12-03

    A method of fabricating an acoustic wave resonator wherein all processing steps are accomplished from a single side of said substrate. The method involves deposition of a multi-layered Al/AlN structure on a GaAs substrate followed by a series of fabrication steps to define a resonator from said composite. The resulting resonator comprises an AlN layer between two Al layers and another layer of AlN on an exterior of one of said Al layers.

  15. Imaging of Al/Fe ratios in synthetic Al-goethite revealed by nanoscale secondary ion mass spectrometry.

    PubMed

    Pohl, Lydia; Kölbl, Angelika; Werner, Florian; Mueller, Carsten W; Höschen, Carmen; Häusler, Werner; Kögel-Knabner, Ingrid

    2018-04-30

    Aluminium (Al)-substituted goethite is ubiquitous in soils and sediments. The extent of Al-substitution affects the physicochemical properties of the mineral and influences its macroscale properties. Bulk analysis only provides total Al/Fe ratios without providing information with respect to the Al-substitution of single minerals. Here, we demonstrate that nanoscale secondary ion mass spectrometry (NanoSIMS) enables the precise determination of Al-content in single minerals, while simultaneously visualising the variation of the Al/Fe ratio. Al-substituted goethite samples were synthesized with increasing Al concentrations of 0.1, 3, and 7 % and analysed by NanoSIMS in combination with established bulk spectroscopic methods (XRD, FTIR, Mössbauer spectroscopy). The high spatial resolution (50-150 nm) of NanoSIMS is accompanied by a high number of single-point measurements. We statistically evaluated the Al/Fe ratios derived from NanoSIMS, while maintaining the spatial information and reassigning it to its original localization. XRD analyses confirmed increasing concentration of incorporated Al within the goethite structure. Mössbauer spectroscopy revealed 11 % of the goethite samples generated at high Al concentrations consisted of hematite. The NanoSIMS data show that the Al/Fe ratios are in agreement with bulk data derived from total digestion and demonstrated small spatial variability between single-point measurements. More advantageously, statistical analysis and reassignment of single-point measurements allowed us to identify distinct spots with significantly higher or lower Al/Fe ratios. NanoSIMS measurements confirmed the capacity to produce images, which indicated the uniform increase in Al-concentrations in goethite. Using a combination of statistical analysis with information from complementary spectroscopic techniques (XRD, FTIR and Mössbauer spectroscopy) we were further able to reveal spots with lower Al/Fe ratios as hematite. Copyright © 2018 John

  16. Burden of rare variants in ALS genes influences survival in familial and sporadic ALS.

    PubMed

    Pang, Shirley Yin-Yu; Hsu, Jacob Shujui; Teo, Kay-Cheong; Li, Yan; Kung, Michelle H W; Cheah, Kathryn S E; Chan, Danny; Cheung, Kenneth M C; Li, Miaoxin; Sham, Pak-Chung; Ho, Shu-Leong

    2017-10-01

    Genetic variants are implicated in the development of amyotrophic lateral sclerosis (ALS), but it is unclear whether the burden of rare variants in ALS genes has an effect on survival. We performed whole genome sequencing on 8 familial ALS (FALS) patients with superoxide dismutase 1 (SOD1) mutation and whole exome sequencing on 46 sporadic ALS (SALS) patients living in Hong Kong and found that 67% had at least 1 rare variant in the exons of 40 ALS genes; 22% had 2 or more. Patients with 2 or more rare variants had lower probability of survival than patients with 0 or 1 variant (p = 0.001). After adjusting for other factors, each additional rare variant increased the risk of respiratory failure or death by 60% (p = 0.0098). The presence of the rare variant was associated with the risk of ALS (Odds ratio 1.91, 95% confidence interval 1.03-3.61, p = 0.03), and ALS patients had higher rare variant burden than controls (MB, p = 0.004). Our findings support an oligogenic basis with the burden of rare variants affecting the development and survival of ALS. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

  17. Impact of the 26mAl(p, γ) reaction to galactic 26Al yield

    NASA Astrophysics Data System (ADS)

    Kahl, D.; Shimizu, H.; Yamaguchi, H.; Abe, K.; Beliuskina, O.; Cha, S. M.; Chae, K. Y.; Chen, A. A.; Ge, Z.; Hayakawa, S.; Imai, N.; Iwasa, N.; Kim, A.; Kim, D. H.; Kim, M. J.; Kubono, S.; Kwag, M. S.; Liang, J.; Moon, J. Y.; Nishimura, S.; Oka, S.; Park, S. Y.; Psaltis, A.; Teranishi, T.; Ueno, Y.; Yang, L.

    2018-04-01

    Astrophysical observables that are directly linked to nuclear physics inputs provide critical and stringent constraints on nucleosynthetic models. As 26Al was the first specific radioactivity observed in the Galaxy, its origin has fascinated the nuclear astrophysics community for nearly forty years. Despite extensive research, the precise origins of 26Al remain elusive. At present, the sum of all putative stellar contributions generally overestimates the 26Al mass in the interstellar medium. Among the many reactions that influence the yield of 26Al, radiative proton capture on its isomer 26mAl is one of the least constrained reactions by experimental data. To this end, we developed a 26Al isomeric beam and performed proton elastic scattering to search for low-spin states in 27Si. The experimental method and the preliminary results of this on-going study will be presented.

  18. Removal of metallic Al and Al/Zn alloys in MSWI bottom ash by alkaline treatment.

    PubMed

    Xuan, Dongxing; Poon, Chi Sun

    2018-02-15

    In order to reduce the leaching of pollutants and remove the Al and Zn/Al alloy from municipal solid waste incineration bottom ash (MSWIBA), an optimized alkaline pre-treatment procedure was developed in this study. The influences of alkaline conditions on the removal rate of Al and Zn/Al alloy were investigated, including [OH] - concentration, temperature, particle size, liquid/solid ratio and treatment duration. The experimental results showed that the optimized alkaline pre-treatment conditions to efficiently remove the Al and Zn/Al alloy was by using a minimum of 1.0mol/l [OH] - , at 55°C and with a minimal liquid/solid ratio of 5. The removal rate of Al and Zn/Al alloy followed an S-shape curve, in which the slow beginning stage was attributed to the protection of the oxidation layer and the quenched product around the Al and Al/Zn alloy. After 3h of the optimized alkaline pre-treatment, the leaching of Cr, Cu, Pb and Zn of the treated MSWIBA was reduced by more than 90% of that of the original MSWIBA. The alkali-silica reaction test further indicated that the expansion of concrete prepared with the pre-treated MSWIBA was significantly reduced and there was no macro-crack or spalling damage on the surface of the tested specimens. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Nocardiose pulmonaire sur un terrain immunocompétent: à propos de 2 cas

    PubMed Central

    Rhofir, Yasmina; Zahraoui, Rachida; Tiress, Nabil; Naji-Amrani, Hicham; Soualhi, Mouna; Bourkadi, Jamal Eddine

    2017-01-01

    La nocardiose est une infection rare, mais sévère, causée par des bactéries du genre nocardia, qui appartiennent à l'ordre des actinomycétales. Si elles peuvent toucher l'adulte immunocompétent, les nocardioses restent des pathologies de l'individu fragilisé sur le plan immunitaire. L'atteinte pulmonaire reste la plus fréquente, sa prise en charge correcte est liée au diagnostic qui est souvent retardé par des présentations non spécifiques et des prélèvements non concluants. Nous rapportons ici deux cas de nocardiose chez des patients immunocompétents. Le premier cas est celui d'un homme de 24 ans, avec notion de tabagisme et d'éthylisme, hospitalisé pour des douleurs thoraciques et des hémoptysies de faible abondance, évoluant depuis deux mois, avec apparition d'abcès sous cutanés dorsaux fistulisés. L'exploration radiologique découvre une masse tissulaire médiastino-pulmonaire droite avec lyse costale adjacente et diffusion aux tissus para vertébraux droits. Les prélèvements bactériologiques restent négatifs motivant une biopsie scannoguidée de la lésion qui est revenue en faveur d'infection à nocardiose. Le second cas concerne un homme de 22 ans, aux antécédents de tuberculose pleurale traitée il y a 8 ans puis une rechute de tuberculose en 2011 (abcès médiastinal). Admis pour suspicion de rechute de tuberculose devant une toux chronique avec altération de l'état général et une hépatosplénomégalie. Le scanner thoracique montre des condensations alvéolaires avec pleurésie. Au cours de son hospitalisation, apparition de tuméfactions sous cutanées purulentes dont l'étude bactériologique du pus est revenue en faveur de nocardiose avec une souche résistante à tous les antibiotiques sauf colistine et bactrim. Les auteurs illustrent à travers ces deux observations, les aspects cliniques et radiologiques de nocardiose pulmonaire en mettant le point sur les difficultés diagnostiques et thérapeutiques surtout dans un

  20. Current transport mechanism in graphene/AlGaN/GaN heterostructures with various Al mole fractions

    NASA Astrophysics Data System (ADS)

    Pandit, Bhishma; Seo, Tae Hoon; Ryu, Beo Deul; Cho, Jaehee

    2016-06-01

    The current transport mechanism of graphene formed on AlxGa1-xN/GaN heterostructures with various Al mole fractions (x = 0.15, 0.20, 0.30, and 0.40) is investigated. The current-voltage measurement from graphene to AlGaN/GaN shows an excellent rectifying property. The extracted Schottky barrier height of the graphene/AlGaN/GaN contacts increases with the Al mole fraction in AlGaN. However, the current transport mechanism deviates from the Schottky-Mott theory owing to the deterioration of AlGaN crystal quality at high Al mole fractions confirmed by reverse leakage current measurement.

  1. Comparison of ALS functionality and plant growth in ALS-inhibitor susceptible and resistant Myosoton aquaticum L.

    PubMed

    Liu, Weitang; Bai, Shuang; Jia, Sisi; Guo, Wenlei; Zhang, Lele; Li, Wei; Wang, Jinxin

    2017-10-01

    Herbicide target-site resistance mutations may cause pleiotropic effects on plant ecology and physiology. The effect of several known (Pro197Ser, Pro197Leu Pro197Ala, and Pro197Glu) target-site resistance mutations of the ALS gene on both ALS functionality and plant vegetative growth of weed Myosoton aquaticum L. (water chickweed) have been investigated here. The enzyme kinetics of ALS from four purified water chickweed populations that each homozygous for the specific target-site resistance-endowing mutations were characterized and the effect of these mutations on plant growth was assessed via relative growth rate (RGR) analysis. Plants homozygous for Pro197Ser and Pro197Leu exhibited higher extractable ALS activity than susceptible (S) plants, while all ALS mutations with no negative change in ALS kinetics. The Pro197Leu mutation increased ALS sensitivity to isoleucine and valine, and Pro197Glu mutation slightly increased ALS sensitivity to isoleucine. RGR results indicated that none of these ALS resistance mutations impose negative pleiotropic effects on relative growth rate. However, resistant (R) seeds had a lowed germination rate than S seeds. This study provides baseline information on ALS functionality and plant growth characteristics associated with ALS inhibitor resistance-endowing mutations in water chickweed. Copyright © 2017. Published by Elsevier Inc.

  2. Structural inheritance and difference between Ti 2AlC, Ti 3AlC 2  and Ti 5Al 2C 3 under pressure from first principles

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gao, Qing -He; Du, An; Yang, Ze -Jin

    The structural inheritance and difference between Ti 2AlC, Ti 3AlC 2 and Ti 5Al 2C 3 under pressure from first principles are studied. The results indicate that the lattice parameter a are almost the same within Ti 2AlC, Ti 3AlC 2 and Ti 5Al 2C 3, and the value of c in Ti 5Al 2C 3 is the sum of Ti 2AlC and Ti 3AlC 2 which is revealed by the covalently bonded chain in the electron density difference: Al–Ti–C–Ti–Al for Ti 2AlC, Al–Ti 2–C–Ti 1–C–Ti 2–Al for Ti 3AlC 2 and Al–Ti 3–C 2–Ti 3–Al–Ti 2–C 1–Ti 1–C 1–Timore » 2–Al for Ti 5Al 2C 3. The calculated axial compressibilities, volumetric shrinkage, elastic constant c 11, c 33/c 11 ratio, bulk modulus, shear modulus, and Young’s modulus of Ti 5Al 2C 3 are within the range of the end members (Ti 2AlC and Ti 3AlC 2) in a wide pressure range of 0–100 GPa. Only Ti 2AlC is isotropic crystal at about 50 GPa within the Ti–Al–C compounds. All of the Ti 3 d density of states curves of the three compounds move from lower energy to higher energy level with pressure increasing. The similarities of respective bond length, bond overlap population (Ti–C, Ti–Al and Ti–Ti), atom Mulliken charges under pressure as well as the electron density difference for the three compounds are discovered. Among the Ti–Al–C ternary compounds, Ti–Ti bond behaves least compressibility, whereas the Ti–Al bond is softer than that of Ti–C bonds, which can also been confirmed by the density of states and electron density difference. Bond overlap populations of Ti–Ti, Ti–C and Ti–Al indicate that the ionicity interaction becomes more and more stronger in the three structures as the pressure increasing. Lastly, Mulliken charges of Ti 1, Ti 2, Ti 3, C and Al are 0.65, 0.42, 0.39, –0.73, –0.04 at 0 GPa, respectively, which are consistent with the Pauling scale.« less

  3. Structural inheritance and difference between Ti 2AlC, Ti 3AlC 2  and Ti 5Al 2C 3 under pressure from first principles

    DOE PAGES

    Gao, Qing -He; Du, An; Yang, Ze -Jin

    2017-02-08

    The structural inheritance and difference between Ti 2AlC, Ti 3AlC 2 and Ti 5Al 2C 3 under pressure from first principles are studied. The results indicate that the lattice parameter a are almost the same within Ti 2AlC, Ti 3AlC 2 and Ti 5Al 2C 3, and the value of c in Ti 5Al 2C 3 is the sum of Ti 2AlC and Ti 3AlC 2 which is revealed by the covalently bonded chain in the electron density difference: Al–Ti–C–Ti–Al for Ti 2AlC, Al–Ti 2–C–Ti 1–C–Ti 2–Al for Ti 3AlC 2 and Al–Ti 3–C 2–Ti 3–Al–Ti 2–C 1–Ti 1–C 1–Timore » 2–Al for Ti 5Al 2C 3. The calculated axial compressibilities, volumetric shrinkage, elastic constant c 11, c 33/c 11 ratio, bulk modulus, shear modulus, and Young’s modulus of Ti 5Al 2C 3 are within the range of the end members (Ti 2AlC and Ti 3AlC 2) in a wide pressure range of 0–100 GPa. Only Ti 2AlC is isotropic crystal at about 50 GPa within the Ti–Al–C compounds. All of the Ti 3 d density of states curves of the three compounds move from lower energy to higher energy level with pressure increasing. The similarities of respective bond length, bond overlap population (Ti–C, Ti–Al and Ti–Ti), atom Mulliken charges under pressure as well as the electron density difference for the three compounds are discovered. Among the Ti–Al–C ternary compounds, Ti–Ti bond behaves least compressibility, whereas the Ti–Al bond is softer than that of Ti–C bonds, which can also been confirmed by the density of states and electron density difference. Bond overlap populations of Ti–Ti, Ti–C and Ti–Al indicate that the ionicity interaction becomes more and more stronger in the three structures as the pressure increasing. Lastly, Mulliken charges of Ti 1, Ti 2, Ti 3, C and Al are 0.65, 0.42, 0.39, –0.73, –0.04 at 0 GPa, respectively, which are consistent with the Pauling scale.« less

  4. A study on wear resistance and microcrack of the Ti 3Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy

    NASA Astrophysics Data System (ADS)

    Li, Jianing; Chen, Chuanzhong; Squartini, Tiziano; He, Qingshan

    2010-12-01

    Laser cladding of the Al + TiC alloy powder on Ti-6Al-4V alloy can form the Ti 3Al/TiAl + TiC ceramic layer. In this study, TiC particle-dispersed Ti 3Al/TiAl matrix ceramic layer on the Ti-6Al-4V alloy by laser cladding has been researched by means of X-ray diffraction, scanning electron microscope, electron probe micro-analyzer, energy dispersive spectrometer. The main difference from the earlier reports is that Ti 3Al/TiAl has been chosen as the matrix of the composite coating. The wear resistance of the Al + 30 wt.% TiC and the Al + 40 wt.% TiC cladding layer was approximately 2 times greater than that of the Ti-6Al-4V substrate due to the reinforcement of the Ti 3Al/TiAl + TiC hard phases. However, when the TiC mass percent was above 40 wt.%, the thermal stress value was greater than the materials yield strength limit in the ceramic layer, the microcrack was present and its wear resistance decreased.

  5. Al-Mg isotopic evidence for episodic alteration of Ca-Al-rich inclusions from Allende

    NASA Astrophysics Data System (ADS)

    Fagan, T. J.; Guan, Y.; MacPherson, G. J.

    2007-08-01

    Textures, mineral assemblages, and Al-Mg isotope systematics indicate a protracted, episodic secondary mineralization history for Allende Ca-Al-rich inclusions (CAIs). Detailed observations from one type B1 CAI, one B2, one compact type A (CTA), and one fluffy type A (FTA) indicate that these diverse types of CAIs are characterized by two distinct textural and mineralogic types of secondary mineralization: (1) grossular-rich domains, concentrated along melilite grain boundaries in CAI interiors, and (2) feldspathoid-bearing domains, confined mostly to CAI margins just interior to the Wark-Lovering rim sequence. The Al-Mg isotopic compositions of most secondary minerals in the type B1 CAI, and some secondary minerals in the other CAIs, show no resolvable excesses of 26Mg, whereas the primary CAI phases mostly yield correlated excesses of 26Mg with increasing Al/Mg corresponding to "canonical" initial 26Al/27Al ˜ 4.5-5 × 10-5. These secondary minerals formed at least 3 Ma after the primary CAI minerals. All but two analyses of secondary minerals from the fluffy type-A CAI define a correlated increase in 26Mg/24Mg with increasing Al/Mg, yielding (26Al/27Al)0 = (4.9 ± 2.8) × 10-6. The secondary minerals in this CAI formed 1.8-3.2 Ma after the primary CAI minerals. In both cases, the timing of secondary alteration is consistent with, but does not necessarily require, alteration in an asteroidal setting. One grossular from the type B2 CAI, and several grossular and secondary feldspar analyses from the compact type A CAI, have excesses of 26Mg consistent with initial 26Al/27Al ˜ 4.5 × 10-5. Especially in the compact type A CAI, where 26Mg/24Mg in grossular correlates with increasing Al/Mg, these 26Mg excesses are almost certainly due to in situ decay of 26Al. They indicate a nebular setting for formation of the grossular. The preservation of these diverse isotopic patterns indicates that heating on the Allende parent body was not pervasive enough to reset isotopic

  6. Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice

    PubMed Central

    Wang, Xiao; Wang, Wei; Wang, Jingli; Wu, Hao; Liu, Chang

    2017-01-01

    P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN)5/(GaN)1 superlattice (SL) in Al0.83Ga0.17N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as MgGa δ doped AlGaN SLs. Mg acceptor activation energy was significantly reduced from 0.378 to 0.331 eV by using MgGa δ doping in SLs instead of traditional doping in alloys. This new process was confirmed to be able to realize high p-type doping in high Al-content AlGaN. PMID:28290480

  7. Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice

    NASA Astrophysics Data System (ADS)

    Wang, Xiao; Wang, Wei; Wang, Jingli; Wu, Hao; Liu, Chang

    2017-03-01

    P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN)5/(GaN)1 superlattice (SL) in Al0.83Ga0.17N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as MgGa δ doped AlGaN SLs. Mg acceptor activation energy was significantly reduced from 0.378 to 0.331 eV by using MgGa δ doping in SLs instead of traditional doping in alloys. This new process was confirmed to be able to realize high p-type doping in high Al-content AlGaN.

  8. Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice.

    PubMed

    Wang, Xiao; Wang, Wei; Wang, Jingli; Wu, Hao; Liu, Chang

    2017-03-14

    P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN) 5 /(GaN) 1 superlattice (SL) in Al 0.83 Ga 0.17 N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as Mg Ga δ doped AlGaN SLs. Mg acceptor activation energy was significantly reduced from 0.378 to 0.331 eV by using Mg Ga δ doping in SLs instead of traditional doping in alloys. This new process was confirmed to be able to realize high p-type doping in high Al-content AlGaN.

  9. Al-centered icosahedral ordering in Cu46Zr46Al8 bulk metallic glass

    NASA Astrophysics Data System (ADS)

    Fang, H. Z.; Hui, X.; Chen, G. L.; Liu, Z. K.

    2009-03-01

    Icosahedral short-range order, of which Al atoms are caged in the center of icosahedra with Cu and Zr atoms being the vertices, has been evidenced in the Cu46Zr46Al8 glassy structure by ab initio molecular dynamics simulation. These Al-centered clusters distribute irregularly in the three-dimensional space and form a "backbone" structure of the Cu46Zr46Al8 glass alloy. It is suggested that this kind of local structural feature is attributed to the requirement of efficient dense packing and the chemical affinity between Zr-Zr, Zr-Al, and Cu-Zr atoms. Our calculated results are found to be in good agreement with the experimental data.

  10. Al Basrah, Iraq

    NASA Image and Video Library

    2017-12-08

    Al Basrah, Iraq Sensor: L7 ETM+ Acquisition Date: April 4, 2003 Path/Row: 166/39 Lat/Long: 30.486/47.811 Smoke drifts south in this image of Al Basrah, located in southeastern Iraq. The green circles from the center to the left of the image represent irrigated crops.

  11. Maps showing estimated sediment yield from coastal landslides and active slope distribution along the Big Sur coast, Monterey and San Luis Obispo Counties, California

    USGS Publications Warehouse

    Hapke, Cheryl J.; Green, Krystal R.; Dallas, Kate

    2004-01-01

    The 1982-83 and 1997-98 El Ni?os brought very high precipitation to California?s central coast; this precipitation resulted in raised groundwater levels, coastal flooding, and destabilized slopes throughout the region. Large landslides in the coastal mountains of Big Sur in Monterey and San Luis Obispo Counties blocked sections of California State Route 1, closing the road for months at a time. Large landslides such as these occur frequently in the winter months along the Big Sur coast due to the steep topography and weak bedrock. A large landslide in 1983 resulted in the closure of Highway 1 for over a year to repair the road and stabilize the slope. Resulting work from the 1983 landslide cost over $7 million and generated 30 million cubic yards of debris from landslide removal and excavations to re-establish the highway along the Big Sur coast. Before establishment of the Monterey Bay National Marine Sanctuary (MBNMS) in 1992, typical road opening measures involved disposal of some landslide material and excess material generated from slope stabilization onto the seaward side of the highway. It is likely that some or most of this disposed material, either directly or indirectly through subsequent erosion, was eventually transported downslope into the ocean. In addition to the landslides that initiate above the road, natural slope failures sometimes occur on the steep slopes below the road and thus deliver material to the base of the coastal mountains where it is eroded and dispersed by waves and nearshore currents. Any coastal-slope landslide, generated through natural or anthropogenic processes, can result in sediment entering the nearshore zone. The waters offshore of the Big Sur coast are part of the MBNMS. Since it was established in 1992, landslide-disposal practices came under question for two reasons. The U.S. Code of Federal Regulations, Title 15, Section 922.132 prohibits discharging or depositing, from beyond the boundary of the Sanctuary, any material

  12. Al Speciation in Silicate Melts: AlV a new Network Former?

    NASA Astrophysics Data System (ADS)

    Neuville, D. R.; Florian, P.; de Ligny, D.; Montouillout, V.; Massiot, D.

    2009-05-01

    The first human glasses were made 3500 BC. It was essentially sodo-lime silicate glass. To improve the chemical resistance, the thermal properties and increase the viscosity it is interesting to add aluminum in these silicates. But what is the speciation of the aluminum and how it varies according to the chemical composition and to the temperature? The aluminum appears essentially in four or five fold coordination in glasses and melts melted. The proportion of [5]Al varies according to the alkaline or to the earth-alkaline content and to the temperature. We shall present in a first part the influence of the network-modifier on the proportion of [5]Al and then we shall present some new results of absorption of high-temperature using NMR and XANES spectroscopy at the Al K-edge. Finally, from glass transition temperature measurements we propose to explain that [5]Al can be a new network former.

  13. Microstructure and Properties of 5083 Al/1060 Al/AZ31 Composite Plate Fabricated by Explosive Welding

    NASA Astrophysics Data System (ADS)

    Yang, Suyuan; Bao, Jiawei

    2018-03-01

    A 5083 Al/1060 Al/AZ31 composite plate was fabricated by explosive welding. The microstructure and properties of the composite plate were investigated after explosive welding. The results showed that all bonding interfaces were wavy interfaces. With an increasing distance from the detonation point, the wavelength and the amplitude also increased. The EDS results indicated that a 5-μm diffusion layer was observed at the 1060 Al/AZ31 layer, including the Mg2Al3 phase. Adiabatic shear bands and twin structures were observed in AZ31. The shear bond strength of the 5083 Al/1060 Al interface was 60 MPa, and the shear bond strength of the 1060 Al/AZ31 interface was 84 MPa.

  14. NEK1 genetic variability in a Belgian cohort of ALS and ALS-FTD patients.

    PubMed

    Nguyen, Hung Phuoc; Van Mossevelde, Sara; Dillen, Lubina; De Bleecker, Jan L; Moisse, Matthieu; Van Damme, Philip; Van Broeckhoven, Christine; van der Zee, Julie

    2018-01-01

    We evaluated the genetic impact of the amyotrophic lateral sclerosis (ALS) risk gene never in mitosis gene a-related kinase 1 (NEK1) in a Belgian cohort of 278 patients with ALS (n = 245) or ALS with frontotemporal dementia (ALS-FTD, n = 33) and 609 control individuals. We identified 2 ALS patients carrying a loss-of-function (LOF) mutation, p.Leu854Tyrfs*2 and p.Tyr871Valfs*17, that was absent in the control group. A third LOF variant p.Ser1036* was present in 2 sibs with familial ALS but also in an unrelated control person. Missense variants were common in both patients (3.6%) and controls (3.0%). The missense variant, p.Arg261His, which was previously associated with ALS risk, was detected with a minor allele frequency of 0.90% in patients compared to 0.33% in controls. Taken together, NEK1 LOF variants accounted for 1.1% of patients, although interpretation of pathogenicity and penetrance is complicated by the observation of occasional LOF variants in unaffected individuals (0.16%). Furthermore, enrichment of additional ALS gene mutations was observed in NEK1 carriers, suggestive of a "second hit" model were NEK1 variants may modify disease presentation of driving mutations. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

  15. Arsenic entrapment by nanocrystals of Al-magnetite: The role of Al in crystal growth and As retention.

    PubMed

    Freitas, Erico T F; Stroppa, Daniel G; Montoro, Luciano A; de Mello, Jaime W V; Gasparon, Massimo; Ciminelli, Virginia S T

    2016-09-01

    The nature of As-Al-Fe co-precipitates aged for 120 days are investigated in detail by High Resolution Transmission Electron Microscopy (HRTEM), Scanning TEM (STEM), electron diffraction, Energy Dispersive X-Ray Spectroscopy (EDS), Electron Energy-Loss Spectroscopy (EELS), and Energy Filtered Transmission Electron Microscopy (EFTEM). The Al present in magnetite is shown to favour As incorporation (up to 1.10 wt%) relative to Al-free magnetite and Al-goethite, but As uptake by Al-magnetite decreases with increasing Al substitution (3.53-11.37 mol% Al). Arsenic-bearing magnetite and goethite mesocrystals (MCs) are formed by oriented aggregation (OA) of primary nanoparticles (NPs). Well-crystalline magnetite likely formed by Otswald ripening was predominant in the Al-free system. The As content in Al-goethite MCs (having approximately 13% substituted Al) was close to the EDS detection limit (0.1 wt% As), but was below detection in Al-goethites with 23.00-32.19 mol% Al. Our results show for the first time the capacity of Al-magnetite to incorporate more As than Al-free magnetite, and the role of Al in favouring OA-based crystal growth under the experimental conditions, and therefore As retention in the formed MCs. The proposed mechanism of As incorporation involves adsorption of As onto the newly formed NPs. Arsenic is then trapped in the MCs as they grow by self-assembly OA upon attachment of the NPs. We conclude that Al may diffuse to the crystal faces with high surface energy to reduce the total energy of the system during the attachment events, thus favouring the oriented aggregation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Electronic circuits having NiAl and Ni.sub.3 Al substrates

    DOEpatents

    Deevi, Seetharama C.; Sikka, Vinod K.

    1999-01-01

    An electronic circuit component having improved mechanical properties and thermal conductivity comprises NiAl and/or Ni.sub.3 Al, upon which an alumina layer is formed prior to applying the conductive elements. Additional layers of copper-aluminum alloy or copper further improve mechanical strength and thermal conductivity.

  17. Internally consistent thermodynamic data for high-pressure and ultrahigh-pressure phases in the system CaO-MgO-Al2O3-SiO2-H2O

    NASA Astrophysics Data System (ADS)

    Grevel, K. D.

    2008-12-01

    In order to enable reliable calculations of phase relations among high-pressure phases the Berman [1] data set was augmented by data for the high-pressure phases stishovite (stv), topaz-OH (toz-OH), phase pi (pi), Mg-staurolite (Mg-st), Mg-sursassite (Mg-sur), and Mg-chloritoid (Mg-cld) using a similar optimization technique as described by Berman et al. [2]. The data of several other phases of the system CaO-MgO- Al2O3-SiO2-H2O obtained in the Berman data base were slightly refined to keep the consistency to the reversal brackets and the originally measured data: andalusite (and), clinochlore (chl), coesite (cs), diaspore (dsp), kaolinite (kln), kyanite (ky), lawsonite (lws), pyrophyllite (prl), sillimanite (sil), zoisite (zo). CP-data were kept constant [1] or estimated [3]. phase; ΔfH0298 (kJ mol-1); S0298 (J K-1 mol-1); V0298 (J K-1 mol-1); v1×105 (bar-1); v2×1012 (bar-2); v3×105 (K-1); v4×108 (K-2) and; -2589.857; 91.47; 5.146; -0.0653; 0.000; 2.291; 0.170 chl; -8903.532; 437.92; 21.000; -0.1328; 3.837; 2.142; 0.962 Mg-cld; -3551.657; 142.20; 6.874; -0.0692; 0.000; 2.544; 0.000 cs; -907.510; 39.63; 2.064; -0.0998; 1.823; 0.620; 0.960 dsp; -999.115; 35.22; 1.776; -0.0719; 0.629; 3.245; 0.684 kln; -4119.400; 204.18; 9.952; -0.1200; 0.000; 3.200; 0.000 ky; -2593.767; 82.71; 4.408; -0.0593; 1.021; 1.730; 0.787 lws; -4866.665; 228.04; 10.155; -0.0825; 0.000; 3.339; 0.000 Mg-sur; -13907.329; 608.39; 26.888; -0.0826; 0.923; 3.187; 0.087 pi; -9586.742; 403.23; 18.559; -0.0678; 0.000; 2.254; 0.000 prl; -5640.501; 239.43; 12.782; -0.1800; 0.000; 2.621; 0.000 sil; -2586.169; 95.40; 4.984; -0.0601; 1.341; 1.138; 0.605 Mg-st; -24998.289; 944.53; 44.260; -0.0579; 0.000; 2.017; 0.000 stv; -870.861; 25.59; 1.401; -0.0318; 0.000; 1.849; 0.000 toz-OH; -2885.939; 117.40; 5.352; -0.0630; 0.000; 1.938; 0.000 zo; -6889.494; 297.20; 13.565; -0.0695; 0.000; 2.752; 0.000 References [1] R.G. Berman, J. Petrol., 1988, 29, 445 [2] R.G. Berman et al., J. Petrol., 1986, 27, 1331 [3] R

  18. Transcriptome Analysis of Al-Induced Genes in Buckwheat (Fagopyrum esculentum Moench) Root Apex: New Insight into Al Toxicity and Resistance Mechanisms in an Al Accumulating Species

    PubMed Central

    Xu, Jia Meng; Fan, Wei; Jin, Jian Feng; Lou, He Qiang; Chen, Wei Wei; Yang, Jian Li; Zheng, Shao Jian

    2017-01-01

    Relying on Al-activated root oxalate secretion, and internal detoxification and accumulation of Al, buckwheat is highly Al resistant. However, the molecular mechanisms responsible for these processes are still poorly understood. It is well-known that root apex is the critical region of Al toxicity that rapidly impairs a series of events, thus, resulting in inhibition of root elongation. Here, we carried out transcriptome analysis of the buckwheat root apex (0–1 cm) with regards to early response (first 6 h) to Al stress (20 μM), which is crucial for identification of both genes and processes involved in Al toxicity and tolerance mechanisms. We obtained 34,469 unigenes with 26,664 unigenes annotated in the NCBI database, and identified 589 up-regulated and 255 down-regulated differentially expressed genes (DEGs) under Al stress. Functional category analysis revealed that biological processes differ between up- and down-regulated genes, although ‘metabolic processes’ were the most affected category in both up- and down-regulated DEGs. Based on the data, it is proposed that Al stress affects a variety of biological processes that collectively contributes to the inhibition of root elongation. We identified 30 transporter genes and 27 transcription factor (TF) genes induced by Al. Gene homology analysis highlighted candidate genes encoding transporters associated with Al uptake, transport, detoxification, and accumulation. We also found that TFs play critical role in transcriptional regulation of Al resistance genes in buckwheat. In addition, gene duplication events are very common in the buckwheat genome, suggesting a possible role for gene duplication in the species’ high Al resistance. Taken together, the transcriptomic analysis of buckwheat root apex shed light on the processes that contribute to the inhibition of root elongation. Furthermore, the comprehensive analysis of both transporter genes and TF genes not only deep our understanding on the responses

  19. Transcriptome Analysis of Al-Induced Genes in Buckwheat (Fagopyrum esculentum Moench) Root Apex: New Insight into Al Toxicity and Resistance Mechanisms in an Al Accumulating Species.

    PubMed

    Xu, Jia Meng; Fan, Wei; Jin, Jian Feng; Lou, He Qiang; Chen, Wei Wei; Yang, Jian Li; Zheng, Shao Jian

    2017-01-01

    Relying on Al-activated root oxalate secretion, and internal detoxification and accumulation of Al, buckwheat is highly Al resistant. However, the molecular mechanisms responsible for these processes are still poorly understood. It is well-known that root apex is the critical region of Al toxicity that rapidly impairs a series of events, thus, resulting in inhibition of root elongation. Here, we carried out transcriptome analysis of the buckwheat root apex (0-1 cm) with regards to early response (first 6 h) to Al stress (20 μM), which is crucial for identification of both genes and processes involved in Al toxicity and tolerance mechanisms. We obtained 34,469 unigenes with 26,664 unigenes annotated in the NCBI database, and identified 589 up-regulated and 255 down-regulated differentially expressed genes (DEGs) under Al stress. Functional category analysis revealed that biological processes differ between up- and down-regulated genes, although 'metabolic processes' were the most affected category in both up- and down-regulated DEGs. Based on the data, it is proposed that Al stress affects a variety of biological processes that collectively contributes to the inhibition of root elongation. We identified 30 transporter genes and 27 transcription factor (TF) genes induced by Al. Gene homology analysis highlighted candidate genes encoding transporters associated with Al uptake, transport, detoxification, and accumulation. We also found that TFs play critical role in transcriptional regulation of Al resistance genes in buckwheat. In addition, gene duplication events are very common in the buckwheat genome, suggesting a possible role for gene duplication in the species' high Al resistance. Taken together, the transcriptomic analysis of buckwheat root apex shed light on the processes that contribute to the inhibition of root elongation. Furthermore, the comprehensive analysis of both transporter genes and TF genes not only deep our understanding on the responses of

  20. Some TEM observations of Al2O3 scales formed on NiCrAl alloys

    NASA Technical Reports Server (NTRS)

    Smialek, J.; Gibala, R.

    1979-01-01

    The microstructural development of Al2O3 scales on NiCrAl alloys has been examined by transmission electron microscopy. Voids were observed within grains in scales formed on a pure NiCrAl alloy. Both voids and oxide grains grew measurably with oxidation time at 1100 C. The size and amount of porosity decreased towards the oxide-metal growth interface. The voids resulted from an excess number of oxygen vacancies near the oxidemetal interface. Short-circuit diffusion paths were discussed in reference to current growth stress models for oxide scales. Transient oxidation of pure, Y-doped, and Zr-doped NiCrAl was also examined. Oriented alpha-(Al, Cr)2O3 and Ni(Al, Cr)2O4 scales often coexisted in layered structures on all three alloys. Close-packed oxygen planes and directions in the corundum and spinel layers were parallel. The close relationship between oxide layers provided a gradual transition from initial transient scales to steady state Al2O3 growth.

  1. Transitions in Al Coordination during Gibbsite Crystallization Using High-Field 27 Al and 23 Na MAS NMR Spectroscopy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hu, Jian Zhi; Zhang, Xin; Jaegers, Nicholas R.

    Mechanisms of nucleation and growth of Al hydroxides such as gibbsite from aqueous solution, particularly in highly alkaline conditions, remain poorly understood. In this work, quantitative 27Al and 22Na MAS NMR experiments were conducted on solid samples extracted from the crystallization of gibbsite from an amorphous aluminum hydroxide gel precursor. The use of high magnetic field and fast sample spinning allowed transitional tetrahedral (AlT) and pentahedral (AlP) aluminum species to be observed along with the octahedral aluminum (AlO) that dominates the gibbsite product. Low-coordinated Al species could be detected at concentrations as low as 0.1% of the total Al sites.more » It is established that (a) AlT and AlP coexist on the surface of growing gibbsites even with a combined percentage over the total Al sites of less than 1%; (b) Different synthesis methods generate gibbsite with varying amounts of low-coordinated Al; (c) the amorphous gel precursor contains a significant amount of low-coordinated Al sites with AO: AlP: AlT ratios of approximately 4:2:1; (d) upon hydration, the external, low-coordinated Al sites become six-fold coordinated by interacting with the oxygen in H2O and the 27Al MAS NMR peak position shifts to that for the AlO sites; (e) gibbsite with increased long range order is synthesized over longer times by gradually incorporating residual AlP and AlT sites into octahedrally-coordinated AlO sites; (f) trace Na is predominantly a surface species on gibbsite particles. These findings provide a basis for understanding the gibbsite crystallization mechanism, along with a general means of characterizing gibbsite surface properties that are of equal importance for understanding related processes such as dissolution behavior.« less

  2. Adhesive and tribocorrosive behavior of TiAlPtN/TiAlN/TiAl multilayers sputtered coatings over CoCrMo

    NASA Astrophysics Data System (ADS)

    Canto, C. E.; Andrade, E.; Rocha, M. F.; Alemón, B.; Flores, M.

    2017-09-01

    The tribocorrosion resistance and adherence of multilayer coatings of TiAlPtN/TiAlN/TiAl synthesized by PVD reactive magnetron sputtering over a CoCrMo alloy substrate in 10 periods of 30 min each were analyzed and compared to those of the substrate alone and to that of a TiAlPtN single layer coating of the same thickness. The objective of the present work was to create multilayers with different amounts of Pt in order to enhance the tribocorrosion resistance of a biomedical alloy of CoCrMo. Tribocorrosion tests were performed using Simulated Body Fluid (SBF) at typical body temperature with a tribometer in a pin on disk test. The elemental composition and thickness of the coating which behave better at the tribocorrosion tests were evaluated by means of RBS (Rutherford Backscattering Spectroscopy) IBA (Ion Beam Analysis) technique, using an alpha particles beam of 1.8 MeV, before and after the reciprocating motion in the tribocorrosion test. In order to simulate the elemental profile of the samples, the SIMNRA simulation computer code was used. Measurements of the adhesion of the coatings to the substrate were carried on by means of a scratch test using a tribometer. By taking micrographs of the produced tracks, the critical loads at which the coatings are fully separated from the substrate were determined. From these tests it was observed that a coating with 10 min of TiAlPtN in a TiAlPtN/TiAl period of 30 min in multilayers of 10 periods and with an average thickness of 145 nm for the TiAlPtN nanolayers had the best tribocorrosion resistance behavior, compared to that of the CoCrMo alloy. The RBS experiments showed a reduction of the thickness of the films along with some loss of the multilayer structure after the reciprocating motion. The adhesion tests indicated that the multilayer with the average TiAlPtN thickness of 145 nm displayed the highest critical load. These results indicate a high correlation between the adherence and the tribocorrosion behavior.

  3. Microstructure of Reaction Zone Formed During Diffusion Bonding of TiAl with Ni/Al Multilayer

    NASA Astrophysics Data System (ADS)

    Simões, Sónia; Viana, Filomena; Koçak, Mustafa; Ramos, A. Sofia; Vieira, M. Teresa; Vieira, Manuel F.

    2012-05-01

    In this article, the characterization of the interfacial structure of diffusion bonding a TiAl alloy is presented. The joining surfaces were modified by Ni/Al reactive multilayer deposition as an alternative approach to conventional diffusion bonding. TiAl substrates were coated with alternated Ni and Al nanolayers. The nanolayers were deposited by dc magnetron sputtering with 14 nm of period (bilayer thickness). Joining experiments were performed at 900 °C for 30 and 60 min with a pressure of 5 MPa. Cross sections of the joints were prepared for characterization of their interfaces by scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), high resolution TEM (HRTEM), energy dispersive x-ray spectroscopy (EDS), and electron backscatter diffraction (EBSD). Several intermetallic compounds form at the interface, assuring the bonding of the TiAl. The interface can be divided into three distinct zones: zone 1 exhibits elongated nanograins, very small equiaxed grains are observed in zone 2, while zone 3 has larger equiaxed grains. EBSD analysis reveals that zone 1 corresponds to the intermetallic Al2NiTi and AlNiTi, and zones 2 and 3 to NiAl.

  4. Processing of In-Situ Al-AlN Metal Matrix Composites via Direct Nitridation Method

    DTIC Science & Technology

    1998-04-01

    to prepare the aluminum melts with desired chemical compositions. Table 1. Chemical compositions of the starting materials. Alloy Mg Fe Cr Si Ni Al...Al 0.001 0.11 0.001 0.04 0.005 bal. Alloy Al Fe Cr Si Ni Mg Mg 0.01 0.12 0.001 0.03 0.006 bal. The ingots were initially cut to chunks with...hours. Figure 26 shows the optical micrographs obtained from the ingots after nitridation reaction of the alloys initially containing Al- 5wt .% Si

  5. Lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse

    PubMed Central

    Kahan, Meldon; Wilson, Lynn; Mailis-Gagnon, Angela; Srivastava, Anita

    2011-01-01

    Résumé Objectif Présenter aux médecins de famille un résumé clinique pratique sur la prescription d’opioïdes à des populations particulières en se fondant sur les recommandations faites dans les lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse. Qualité des données Pour produire les lignes directrices, les chercheurs ont effectué une synthèse critique de la littérature médicale en insistant plus précisément sur les études de l’efficacité et de la sécurité des opioïdes dans des populations particulières. Message principal Les médecins de famille peuvent atténuer les risques de surdose, de sédation, d’usage abusif et de dépendance grâce à des stratégies adaptées à l’âge et à l’état de santé des patients. Dans le cas de patients à risque de dépendance, on devrait réserver les opioïdes aux douleurs nociceptives ou neuropathiques bien définies qui n’ont pas répondu aux traitements de première intention. Il faut procéder lentement au titrage des opioïdes, avec des dispensations fréquentes et une étroite surveillance pour dépister tout signe d’usage abusif. Une dépendance aux opioïdes suspectée est prise en charge au moyen d’une thérapie structurée aux opioïdes, d’un traitement à la méthadone ou à la buprénorphine ou encore d’un traitement fondé sur l’abstinence. Les patients souffrant de troubles de l’humeur ou d’anxiété ont tendance à avoir une réponse analgésique atténuée aux opioïdes, sont à risque plus élevé d’usage abusif et prennent souvent des sédatifs qui interagissent défavorablement avec les opioïdes. Il faut prendre des précautions semblables à celles utilisées avec d’autres patients à risque élevé. Il faut faire un sevrage progressif si la douleur du patient demeure sévère même avec un essai adéquat de thérapie aux opioïdes. Chez les personnes âgées, la s

  6. Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys.

    PubMed

    Li, Jiehua; Hage, Fredrik S; Liu, Xiangfa; Ramasse, Quentin; Schumacher, Peter

    2016-04-28

    The heterogeneous nucleation of primary Si and eutectic Si can be attributed to the presence of AlP. Although P, in the form of AlP particles, is usually observed in the centre of primary Si, there is still a lack of detailed investigations on the distribution of P within primary Si and eutectic Si in hypereutectic Al-Si alloys at the atomic scale. Here, we report an atomic-scale experimental investigation on the distribution of P in hypereutectic Al-Si alloys. P, in the form of AlP particles, was observed in the centre of primary Si. However, no significant amount of P was detected within primary Si, eutectic Si and the Al matrix. Instead, P was observed at the interface between the Al matrix and eutectic Si, strongly indicating that P, in the form of AlP particles (or AlP 'patch' dependent on the P concentration), may have nucleated on the surface of the Al matrix and thereby enhanced the heterogeneous nucleation of eutectic Si. The present investigation reveals some novel insights into heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys and can be used to further develop heterogeneous nucleation mechanisms based on adsorption.

  7. Quatrième conférence consensuelle sur le diagnostic et le traitement de la démence

    PubMed Central

    Moore, Ainsley; Patterson, Christopher; Lee, Linda; Vedel, Isabelle; Bergman, Howard

    2014-01-01

    Résumé Objectif Revoir les stratégies diagnostiques de la maladie d’Alzheimer, actualiser les recommandations concernant le traitement des symptômes de démence et proposer une approche thérapeutique à la démence d’apparition précoce et d’évolution rapide. Composition du comité Des spécialistes et des délégués de diverses régions du Canada et représentant diverses disciplines pertinentes ont discuté et se sont mis d’accord sur les révisions à apporter aux lignes directrices de 2006. Méthodologie On a eu recours au système GRADE (grading of recommendations, assessment, development, and evaluation) pour évaluer le consensus concernant les recommandations, lequel était défini comme suit : lorsque 80 % ou plus des participants ont voté en faveur de la recommandation. La cote des données probantes est rapportée lorsque cela est possible. Rapport important pour les médecins de famille, malgré les progrès effectués dans les domaines des biomarqueurs liquidiens et de la neuro-imagerie, le diagnostic de démence au Canada demeure fondamentalement clinique. De nouveaux critères cliniques essentiels de diagnostic de la maladie d’Alzheimer en reconnaissent dorénavant les formes moins fréquentes et non amnestiques. La démence précoce, une affection rare, mais importante, devrait inciter les médecins à aiguiller les patients vers un spécialiste ayant accès à des conseillers en génétique. La démence d’évolution rapide, mal définie dans la littérature, faciliterait le dépistage de cette affection rare, mais importante. Les inhibiteurs de la cholinestérase sont maintenant indiqués pour le traitement d’affections autres que la maladie d’Alzheimer. Des lignes directrices concernant l’arrêt du traitement, lesquelles n’existaient pas auparavant, sont également apparues. De nouvelles données probantes sur le recours à la mémantine, aux antidépresseurs et à d’autres agents psychotropes dans le traitement de la

  8. Assessment of phase constitution on the Al-rich region of rapidly solidified Al-Co-Fe-Cr alloys

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wolf, W., E-mail: witorw@gmail.com

    The formation of quasicrystalline approximants in rapidly solidified Al-Co-Fe-Cr alloys was investigated. Alloys of atomic composition Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8}, Al{sub 77}Co{sub 11}Fe{sub 6}Cr{sub 6} and Al{sub 76}Co{sub 19}Fe{sub 4}Cr{sub 1} were produced using melt spinning and arc melting methods and their microstructural characterization was carried out by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Up to the present there is no consensus in the literature regarding the formation of quasicrystalline phase or quasicrystalline approximants in the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy. This work presents, for the first time, a detailed structural characterization of selected alloysmore » in the Al-Co-Fe-Cr system close to the atomic composition Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8}. The results indicated the samples to be composed, mostly, by two intermetallic phases, which are quaternary extensions of Al{sub 5}Co{sub 2} and Al{sub 13}Co{sub 4} and are quasicrystalline approximants. Although the Al{sub 5}Co{sub 2} phase has already been reported in the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy, the presence of the monoclinic Al{sub 13}Co{sub 4} is now identified for the first time in the as cast state. In the binary Al-Co system a quasicrystalline phase is known to form in a rapidly solidified alloy with composition close to the monoclinic and orthorhombic Al{sub 13}Co{sub 4} phases. This binary quasicrystalline phase presents an average valence electron per atom (e/a) between 1.7 and 1.9; thus, in addition to the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy, the compositions Al{sub 77}Co{sub 11}Fe{sub 6}Cr{sub 6} and Al{sub 76}Co{sub 19}Fe{sub 4}Cr{sub 1} were chosen to be within the region of formation of the quaternary extension of the Al{sub 13}Co{sub 4} phase and also within the (e/a) of 1.7 to 1.9. However, no quasicrystalline phase is present in any of the studied alloys. The Al

  9. Statins: Do They Cause ALS?

    MedlinePlus

    Statins: Do they cause ALS? Do statins cause amyotrophic lateral sclerosis (ALS)? Answers from Francisco Lopez-Jimenez, M.D. ... D. Ingre C, et al. Risk factors for amyotrophic lateral sclerosis. Clinical Epidemiology. 2015; 7:181. Riva N, et ...

  10. Hydrodésazotation de la pyridine sous pression atmosphérique catalysée par des oxynitrures de Ni, Mo, et des oxynitrures mixtes MoNi, MoPNi, AlNi et AlPNi

    NASA Astrophysics Data System (ADS)

    Elkamel, K.; Elidrissi, M.; Yacoubi, A.; Nadiri, A.; Abouarnadasse, S.

    1998-11-01

    Hydrodenitrogenation of pyridine has been realised, under atmospheric pressure, in the presence of oxynitride catalysts of molybdenum, nickel and their solid solutions as well as on mixed catalysts MoNi, MoPNi, AlNi and AlPNi. In all cases, the main reaction products are n-pentane and N-pentylpiperidine, at any conversion. Kinetic results suggest that the conversion of pyridine, on nickel oxynitride, proceeds through successive steps with hydrogenation as rate-limiting. Molybdenum oxynitride and Mo-Ni-N solid solutions tested in the temperature range 500 circC-450 circC, showed a good structural and catalytic stability, but a low catalytic activity. On the other hand, nickel oxynitride catalyst yielded higher activity at much lower temperatures (190 circC-250 circC). X-rays analysis indicates that the used catalyst was entirely reduced to metallic nickel, which is the active phase. Under the same experimental conditions, mixed catalysts are relatively less active but more selective than nickel oxynitride into n-pentane formation. La réaction d'hydrodésazotation de la pyridine a été réalisée, sous pression atmosphérique, en présence de catalyseurs oxynitrures de molybdène, de nickel et leurs solutions solides ainsi que sur les catalyseurs mixtes MoNi, MoPNi, AlNi et AlPNi. Dans tous les cas, les principaux produits de réaction observés sont le n-pentane et la N- pentylpipéridine, quel que soit le taux de conversion. Les résultats cinétiques obtenus en régime intégral, en présence de l'oxynitrure de nickel, suggèrent un schéma réactionnel successif où l'hydrogénation de la pyridine serait l'étape limitante. L'oxynitrure de molybdène et les solutions solides Mo-Ni-N, testés à des températures supérieures ou égales à 500 circC, ont montré une bonne stabilité catalytique et structurale mais une faible activité catalytique. En revanche, l'oxynitrure de nickel présente une activité catalytique plus importante à des températures de r

  11. 1000 to 1300 K slow plastic compression properties of Al-deficient NiAl

    NASA Technical Reports Server (NTRS)

    Whittenberger, J. D.; Kumar, K. S.; Mannan, S. K.

    1991-01-01

    Nickel aluminides containing 37, 38.5 and 40 at. pct Al have been fabricated by XD synthesis and hot pressing. Such materials were compression tested in air under constant velocity conditions between 1000 and 1300 K. Examination of the microstructures of hot pressed and compression tested aluminides indicated that the structure consisted of two phases, gamma-prime and NiAl, for essentially all conditions, where gamma-prime was usually found on the NiAl grain boundaries. The stress-strain behavior of all three intermetallics was similar where flow at a nominally constant stress occurred after about two-percent plastic deformation. Furthermore, the 1000 to 1300 K flow stress-strain rate properties are nearly identical for these materials, and they are much lower than those for XD processed Ni-50Al. The overall deformation of the two phase nickel aluminides appears to be controlled by dislocation climb in NiAl rather than processes in gamma-prime.

  12. Fabrication of SiC-Particles-Shielded Al Spheres upon Recycling Al/SiC Composites

    NASA Astrophysics Data System (ADS)

    Madarasz, D.; Budai, I.; Kaptay, G.

    2011-06-01

    Wettability of liquid A359 alloy on SiC particles under molten salt NaCl-KCl-NaF is found at 180 deg, meaning that SiC particles prefer the molten salt phase against the Al phase or the Al/molten salt interface. Thus, this molten salt can be used for recycling, i.e., to separate the phases in the SiC reinforced Al matrix composites. If the separation process is interrupted, Al droplets (submillimeter solidified powder) can be produced, stabilized/surrounded by a monolayer of shielding SiC particles.

  13. Advanced life support (ALS) instructors experience of ALS education in Western Australia: a qualitative exploratory research study.

    PubMed

    Taplin, John; McConigley, Ruth

    2015-04-01

    When cardiac arrest occurs, timely competent advanced life support (ALS) interventions by nursing staff can influence patient outcomes. Ongoing ALS education influences maintenance of competency and avoids skill decay. To explore the methods of ALS education delivery for nurses in the workplace; describe the issues relating to maintaining ALS competency; explore ALS competency decay for nurses and develop recommendations for the provision of continuing ALS education. A qualitative exploratory design was used to study ALS education provision in the workplace. Data were collected from ALS nurse experts in Western Australia by face-to-face and phone interviews. Semi-structured interviews were conducted and organised around a set of predetermined questions. Two major themes were identified; the first theme Demand and Supply describes the increasing demand for ALS education for nurses and the challenges with providing timely cost effective traditional face-to-face ALS education. The second theme, Choosing The Best Education Options describes new ways to provide ALS education using emerging technologies. The study suggested that using e-learning methods would assist with educating the maximum amount of nurses in a timely manner and e-learning and teleconferencing offer opportunities to reach nurses in distant locations. Delivering ALS education more frequently than annually would increase skills maintenance and lessen skill decay. Further research is required to explore which blended e-learning model is best suited to ALS education. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. The Meteoritical Bulletin, No. 88, 2004 July

    USGS Publications Warehouse

    Russell, S.S.; Folco, L.; Grady, M.M.; Zolensky, M.E.; Jones, R.; Righter, K.; Zipfel, J.; Grossman, J.N.

    2004-01-01

    The Meteoritical Bulletin No. 88 lists information for 1610 newly classified meteorites, comprising 753 from Antarctica, 302 from Africa, 505 from Asia (495 of which are from Oman), 40 from North America, 5 from South America, 4 from Europe, and 1 of unknown origin. Information is provided for 9 falls (Alby sur Che??ran, Al Zarnkh, Devgaon, Kamioka, Kendrapara, Maromandia, New Orleans, Sivas, and Villalbeto de la Pen??a). Noteworthy specimens include a eucrite fall (Alby sur Che??ran), 6 martian meteorites, 13 lunar meteorites, and 12 irons including one weighing 3 metric ions (Dronino). ?? Meteoritical Society, 2004.

  15. Processing and characterization of Al-Al3Nb prepared by mechanical alloying and equal channel angular pressing

    NASA Astrophysics Data System (ADS)

    Chandran, P.; Zafari, A.; Lui, E. W.; Xia, K.

    2017-05-01

    Mechanically alloyed Al with immiscible elements such as Nb can lead to a uniform distribution of nanoscaled precipitates which are highly stable compared to conventional alloying and with excellent interface, resulting in significant increase in strength without problems associated with nano ceramic particles in metal matrix composites. Although immiscible, Nb can be alloyed with Al through mechanical milling, forming trialuminide (Al3Nb), either directly or upon subsequent precipitation, which possesses high strength, stiffness and stability at elevated temperatures. In the present study, Al-5 at.% Nb supersaturated solid solution was achieved after prolonged ball milling and nano Al3Nb precipitates were formed during subsequent ageing at 530°C. The Al-Al3Nb powder was consolidated by equal channel angular pressing (ECAP) at 400°C, resulting in a fully dense material with a uniform distribution of nanoscaled Al3Nb precipitates in the Al matrix.

  16. Deformation mechanisms of nanotwinned Al

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, Xinghang

    The objective of this project is to investigate the role of different types of layer interfaces on the formation of high density stacking fault (SF) in Al in Al/fcc multilayers, and understand the corresponding deformation mechanisms of the films. Stacking faults or twins can be intentionally introduced (via growth) into certain fcc metals with low stacking fault energy (such as Cu, Ag and 330 stainless steels) to achieve high strength, high ductility, superior thermal stability and good electrical conductivity. However it is still a major challenge to synthesize these types of defects into metals with high stacking fault energy, suchmore » as Al. Although deformation twins have been observed in some nanocrystalline Al powders by low temperature, high strain rate cryomilling or in Al at the edge of crack tip or indentation (with the assistance of high stress intensity factor), these deformation techniques typically introduce twins sporadically and the control of deformation twin density in Al is still not feasible. This project is designed to test the following hypotheses: (1) Certain type of layer interfaces may assist the formation of SF in Al, (2) Al with high density SF may have deformation mechanisms drastically different from those of coarse-grained Al and nanotwinned Cu. To test these hypotheses, we have performed the following tasks: (i) Investigate the influence of layer interfaces, stresses and deposition parameters on the formation and density of SF in Al. (ii) Understand the role of SF on the deformation behavior of Al. In situ nanoindentation experiments will be performed to probe deformation mechanisms in Al. The major findings related to the formation mechanism of twins and mechanical behavior of nanotwinned metals include the followings: 1) Our studies show that nanotwins can be introduced into metals with high stacking fault energy, in drastic contrast to the general anticipation. 2) We show two strategies that can effectively introduce growth

  17. Study on Microstructure and Mechanical Properties of Hypereutectic Al-18Si Alloy Modified with Al-3B.

    PubMed

    Gong, Chunjie; Tu, Hao; Wu, Changjun; Wang, Jianhua; Su, Xuping

    2018-03-20

    An hypereutectic Al-18Si alloy was modified via an Al-3B master alloy. The effect of the added Al-3B and the modification temperature on the microstructure, tensile fracture morphologies, and mechanical properties of the alloy were investigated using an optical microscope, Image-Pro Plus 6.0, a scanning electron microscope, and a universal testing machine. The results show that the size of the primary Si and its fraction decreased at first, and then increased as an additional amount of Al-3B was added. When the added Al-3B reached 0.2 wt %, the fraction of the primary Si in the Al-18Si alloy decreased with an increase in temperature. Compared with the unmodified Al-18Si alloy, the tensile strength and elongation of the alloy modified at 850 °C with 0.2 wt % Al-3B increased by 25% and 81%, respectively. The tensile fracture of the modified Al-18Si alloy exhibited partial ductile fracture characteristics, but there were more areas with ductile characteristics compared with that of the unmodified Al-18Si alloy.

  18. Electron Trap Energy Distribution in ALD Al2O3, LaAl4Ox, and GdyAl2-yO3 Layers on Silicon

    NASA Astrophysics Data System (ADS)

    Wang, W. C.; Badylevich, M.; Adelmann, C.; Swerts, J.; Kittl, J. A.; Afanas'ev, V. V.

    2012-12-01

    The energy distribution of electron trap density in atomic layer deposited Al2O3, LaAl4Ox and GdyAl2-yO3 insulating layers was studied by using the exhaustive photodepopulation spectroscopy. Upon filling the traps by electron tunneling from Si substrate, a broad energy distribution of trap levels in the energy range 2-4 eV is found in all studied insulators with trap densities in the range of 1012 cm-2eV-1. The incorporation of La and Gd cations reduces the trap density in aluminate layers as compared to Al2O3. Crystallization of the insulator by the post-deposition annealing is found to increase the trap density while the energy distribution remains unchanged. The similar trap spectra in the Al2O3 and La or Gd aluminate layers suggest the common nature of the traps, probably originating from imperfections in the AlOx sub-network.

  19. Al-Si-Cu/TiN multilayer interconnection and Al-Ge reflow sputtering technologies for quarter-micron devices

    NASA Astrophysics Data System (ADS)

    Kikkawa, Takamaro; Kikuta, Kuniko

    1993-05-01

    Issues of interconnection technologies for quarter-micron devices are the reliability of metal lines with quarter-micron feature sizes and the formation of contact-hole-plugs with high aspect ratios. This paper describes a TiN/Al-Si-Cu/TiN/Al-Si-Cu/TiN/Ti multilayer conductor structure as a quarter-micron interconnection technology and aluminum-germanium (Al-Ge) reflow sputtering as a contact-hole filling technology. The TiN/Al-Si-Cu/TiN/Al-Si-Cu/TiN/Ti multilayer conductor structure could suppress stress-induced voiding and improve the electromigration mean-time to failure. These improvements are attributed to the fact that the grain boundaries for the Al-Si-Cu film and the interfaces between the Al-Si-Cu and the TiN films are strengthened by the rigid intermetallic compound, TiAl3. The Al-Ge alloy reflow sputtering is a candidate for contact- and via-hole filling technologies in terms of reducing fabrication costs. The Al-Ge reflow sputtering achieved low temperature contact hole filling at 300 degree(s)C. Contact holes with a diameter of 0.25 micrometers and aspect ratio of 4 could be filled. This is attributed to the low eutectic temperature for Al-Ge (424 degree(s)C) and the effect of thin polysilicon underlayer on the enhancement of Al-Ge reflow.

  20. Electrical conductivity optimization of the Na3AlF6-Al2O3-Sm2O3 molten salts system for Al-Sm intermediate binary alloy production

    NASA Astrophysics Data System (ADS)

    Liao, Chun-fa; Jiao, Yun-fen; Wang, Xu; Cai, Bo-qing; Sun, Qiang-chao; Tang, Hao

    2017-09-01

    Metal Sm has been widely used in making Al-Sm magnet alloy materials. Conventional distillation technology to produce Sm has the disadvantages of low productivity, high costs, and pollution generation. The objective of this study was to develop a molten salt electrolyte system to produce Al-Sm alloy directly, with focus on the electrical conductivity and optimal operating conditions to minimize the energy consumption. The continuously varying cell constant (CVCC) technique was used to measure the conductivity for the Na3AlF6-AlF3-LiF-MgF2-Al2O3-Sm2O3 electrolysis medium in the temperature range from 905 to 1055°C. The temperature ( t) and the addition of Al2O3 ( W(Al2O3)), Sm2O3 ( W(Sm2O3)), and a combination of Al2O3 and Sm2O3 into the basic fluoride system were examined with respect to their effects on the conductivity ( κ) and activation energy. The experimental results showed that the molten electrolyte conductivity increases with increasing temperature ( t) and decreases with the addition of Al2O3 or Sm2O3 or both. We concluded that the optimal operation conditions for Al-Sm intermediate alloy production in the Na3AlF6-AlF3-LiF-MgF2-Al2O3-Sm2O3 system are W(Al2O3) + W(Sm2O3) = 3wt%, W(Al2O3): W(Sm2O3) = 7:3, and a temperature of 965 to 995°C, which results in satisfactory conductivity, low fluoride evaporation losses, and low energy consumption.

  1. Characterization of Al/crystallized Al-based metallic glass composites produced by repeated roll bonding process

    NASA Astrophysics Data System (ADS)

    Alizadeh, Morteza; Khoramkhorshid, Saba; Taghvaei, Amir Hossein; Gokuldoss, Prashanth Konda

    2017-07-01

    Devitrified Al84Gd6Ni7Co3 glassy particles have been used to reinforce Al-matrix composites through repeated roll bonding (RRB) process. Microstructural characterization of the produced composites after various rolling cycles was performed by scanning electron microscopy. Mechanical properties of the fabricated composites were evaluated by the tensile and microhardness tests. The results indicate that the RRB process is successful to produce composites with the negligible amount of flaws and porosity, and it is followed by homogeneous distribution of Al84Gd6Ni7Co3 particles in the Al matrix after nine rolling passes. Elongation of the composites improves significantly upon RRB cycles and the tensile strength and microhardness of them increase more than two times compared to unreinforced Al. According to fractography results, the enhanced mechanical properties are correlated with formation of excellent bonding at the interface of Al84Gd6Ni7Co3 particles and Al matrix. The theoretical values of composites hardness and yield strength calculated based on iso-strain model show a good agreement with respect to the experimental results.

  2. Inductively coupled BCl 3/Cl 2 /Ar plasma etching of Al-rich AlGaN

    DOE PAGES

    Douglas, Erica A.; Sanchez, Carlos A.; Kaplar, Robert J.; ...

    2016-12-01

    Varying atomic ratios in compound semiconductors is well known to have large effects on the etching properties of the material. The use of thin device barrier layers, down to 25 nm, adds to the fabrication complexity by requiring precise control over etch rates and surface morphology. The effects of bias power and gas ratio of BCl 3 to Cl 2 for inductively coupled plasma etching of high Al content AlGaN were contrasted with AlN in this study for etch rate, selectivity, and surface morphology. Etch rates were greatly affected by both bias power and gas chemistry. Here we detail themore » effects of small variations in Al composition for AlGaN and show substantial changes in etch rate with regards to bias power as compared to AlN.« less

  3. Potential skin involvement in ALS: revisiting Charcot's observation - a review of skin abnormalities in ALS.

    PubMed

    Paré, Bastien; Gros-Louis, François

    2017-07-26

    Amyotrophic lateral sclerosis (ALS) is a neurodegenerative disease affecting motor neurons of the brain and spinal cord, leading to progressive paralysis and death. Interestingly, many skin changes have been reported in ALS patients, but never as yet fully explained. These observations could be due to the common embryonic origin of the skin and neural tissue known as the ectodermal germ layer. Following the first observation in ALS patients' skin by Dr Charcot in the 19th century, in the absence of bedsores unlike other bedridden patients, other morphological and molecular changes have been observed. Thus, the skin could be of interest in the study of ALS and other neurodegenerative diseases. This review summarizes skin changes reported in the literature over the years and discusses about a novel in vitro ALS tissue-engineered skin model, derived from patients, for the study of ALS.

  4. Unveiling the Semicoherent Interface with Definite Orientation Relationships between Reinforcements and Matrix in Novel Al3BC/Al Composites.

    PubMed

    Zhao, Yongfeng; Qian, Zhao; Ma, Xia; Chen, Houwen; Gao, Tong; Wu, Yuying; Liu, Xiangfa

    2016-10-05

    High-strength lightweight Al-based composites are promising materials for a wide range of applications. To provide high performance, a strong bonding interface for effective load transfer from the matrix to the reinforcement is essential. In this work, the novel Al 3 BC reinforced Al composites have been in situ fabricated through a liquid-solid reaction method and the bonding interface between Al 3 BC and Al matrix has been unveiled. The HRTEM characterizations on the Al 3 BC/Al interface verify it to be a semicoherent bonding structure with definite orientation relationships: (0001) Al 3 BC //(11̅1) Al ;[112̅0] Al 3 BC //[011] Al . Periodic arrays of geometrical misfit dislocations are also observed along the interface at each (0001) Al 3 BC plane or every five (11̅1) Al planes. This kind of interface between the reinforcement and the matrix is strong enough for effective load transfer, which would lead to the evidently improved strength and stiffness of the introduced new Al 3 BC/Al composites.

  5. 27Al-NMR studies of the structural phase transition in LaPd2Al2

    NASA Astrophysics Data System (ADS)

    Aoyama, Taisuke; Kobayashi, Fumiaki; Kotegawa, Hisashi; Tou, Hideki; Doležal, Petr; Kriegner, Dominik; Javorský, Pavel; Uhlířová, Klára

    2018-05-01

    We performed 27Al-NMR measurements for the CaBe2Ge2 type single crystalline LaPd2Al2 in the temperature range from 100 K to 5 K to investigate the origin of the structural phase transition. We found that the line profile of the 27Al-NMR spectrum does not change entirely on passing through the structural phase transition at Tst. Meanwhile, the peak position of the central line slightly change (≈ 30 ppm) below 70 K, suggesting the orbital shift changes below Tst. The present 27Al-NMR studies evidence that the local electronic state at Al site is hardly affected by the structural phase transition.

  6. Al-Cu-Li and Al-Mg-Li alloys: Phase composition, texture, and anisotropy of mechanical properties (Review)

    NASA Astrophysics Data System (ADS)

    Betsofen, S. Ya.; Antipov, V. V.; Knyazev, M. I.

    2016-04-01

    The results of studying the phase transformations, the texture formation, and the anisotropy of the mechanical properties in Al-Cu-Li and Al-Mg-Li alloys are generalized. A technique and equations are developed to calculate the amounts of the S1 (Al2MgLi), T1 (Al2CuLi), and δ' (Al3Li) phases. The fraction of the δ' phase in Al-Cu-Li alloys is shown to be significantly higher than in Al-Mg-Li alloys. Therefore, the role of the T1 phase in the hardening of Al-Cu-Li alloys is thought to be overestimated, especially in alloys with more than 1.5% Li. A new model is proposed to describe the hardening of Al-Cu-Li alloys upon aging, and the results obtained with this model agree well with the experimental data. A texture, which is analogous to that in aluminum alloys, is shown to form in sheets semiproducts made of Al-Cu-Li and Al-Mg-Li alloys. The more pronounced anisotropy of the properties of lithium-containing aluminum alloys is caused by a significant fraction of the ordered coherent δ' phase, the deformation mechanism in which differs radically from that in the solid solution.

  7. Key species and impact of fishery through food web analysis: A case study from Baja California Sur, Mexico

    NASA Astrophysics Data System (ADS)

    Rocchi, Marta; Scotti, Marco; Micheli, Fiorenza; Bodini, Antonio

    2017-01-01

    Ecosystem-Based Management (EBM) aims to support the protection of natural ecosystems and to improve economic activities. It requires considering all of the actors interacting in social-ecological systems (e.g., fish and fishers) in the understanding that their interplay determines the dynamic behavior of the single actors as well as that of the system as a whole. Connections are thus central to EBM. Within the ecological dimension of socio-ecological systems, interactions between species define such connections. Understanding how connections affect ecosystem and species dynamics is often impaired by a lack of data. We propose food web network analysis as a tool to help bridge the gap between EBM theory and practice in data-poor contexts, and illustrate this approach through its application to a coastal marine ecosystem in Baja California Sur, Mexico. First, we calculated centrality indices to identify which key (i.e., most central) species must be considered when designing strategies for sustainable resource management. Second, we analyzed the resilience of the system by measuring changes in food web structure due to the local extinction of vulnerable species (i.e., by mimicking the possible effect of excessive fishing pressure). The consequences of species removals were quantified in terms of impacts on global structural indices and species' centrality indices. Overall, we found that this coastal ecosystem shows high resilience to species loss. We identified species (e.g., Octopus sp. and the kelp bass, Paralabrax clathratus) whose protection could further decrease the risk of potential negative impacts of fishing activities on the Baja California Sur food web. This work introduces an approach that can be applied to other ecosystems to aid the implementation of EBM in data-poor contexts.

  8. effect of the parameters of AlN/GaN/AlGaN and AlN/GaN/InAlN heterostructures with a two-dimensional electron gas on their electrical properties and the characteristics of transistors on their basis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tsatsulnikov, A. F., E-mail: andrew@beam.ioffe.ru; Lundin, V. W.; Zavarin, E. E.

    The effect of the layer thickness and composition in AlGaN/AlN/GaN and InAlN/AlN/GaN transistor heterostructures with a two-dimensional electron gas on their electrical and the static parameters of test transistors fabricated from such heterostructures are experimentally and theoretically studied. It is shown that the use of an InAlN barrier layer instead of AlGaN results in a more than twofold increase in the carrier concentration in the channel, which leads to a corresponding increase in the saturation current. In situ dielectric-coating deposition on the InAlN/AlN/GaN heterostructure surface during growth process allows an increase in the maximum saturation current and breakdown voltages whilemore » retaining high transconductance.« less

  9. Cancer développé sur dilatation kystique de la voie biliaire: à propos d’un cas

    PubMed Central

    Soufi, Mehdi; Lahlou, Mohammed Khalid; Chad, Bouziane

    2014-01-01

    Les auteurs rapportent un cas de dilatation kystique du cholédoque intra- pancréatique découvert chez une femme de 46 ans et compliqué d'un carcinome tubulo-papillaire n'envahissant pas le pancréas. Le traitement a consisté en une duodénopancréatectomie céphalique avec un curage ganglionnaire et anastomose hépatico-jéjunale; la survie était de 30 mois; les auteurs abordent les aspects radiologiques, anatomopathologiques, thérapeutiques et pronostiques de ces cancers développé sur dilatation kystique de la voie biliaire et discutent la place d'une radiothérapie complémentaire de la chirurgie susceptible d'améliorer la survie. PMID:25922635

  10. Hot-electron real-space transfer and longitudinal transport in dual AlGaN/AlN/{AlGaN/GaN} channels

    NASA Astrophysics Data System (ADS)

    Šermukšnis, E.; Liberis, J.; Matulionis, A.; Avrutin, V.; Ferreyra, R.; Özgür, Ü.; Morkoç, H.

    2015-03-01

    Real-space transfer of hot electrons is studied in dual-channel GaN-based heterostructure operated at or near plasmon-optical phonon resonance in order to attain a high electron drift velocity at high current densities. For this study, pulsed electric field is applied in the channel plane of a nominally undoped Al0.3Ga0.7N/AlN/{Al0.15Ga0.85N/GaN} structure with a composite channel of Al0.15Ga0.85N/GaN, where the electrons with a sheet density of 1.4 × 1013 cm-2, estimated from the Hall effect measurements, are confined. The equilibrium electrons are situated predominantly in the Al0.15Ga0.85N layer as confirmed by capacitance-voltage experiment and Schrödinger-Poisson modelling. The main peak of the electron density per unit volume decreases as more electrons occupy the GaN layer at high electric fields. The associated decrease in the plasma frequency induces the plasmon-assisted decay of non-equilibrium optical phonons (hot phonons) confirmed by the decrease in the measured hot-phonon lifetime from 0.95 ps at low electric fields down below 200 fs at fields of E \\gt 4 kV cm-1 as the plasmon-optical phonon resonance is approached. The onset of real-space transfer is resolved from microwave noise measurements: this source of noise dominates for E \\gt 8 kV cm-1. In this range of fields, the longitudinal current exceeds the values measured for a mono channel reference Al0.3Ga0.7N/AlN/GaN structure. The results are explained in terms of the ultrafast decay of hot phonons and reduced alloy scattering caused by the real-space transfer in the composite channel.

  11. An AlN/Al 0.85Ga 0.15N high electron mobility transistor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baca, Albert G.; Armstrong, Andrew M.; Allerman, Andrew A.

    2016-07-22

    An AlN barrier high electron mobility transistor (HEMT) based on the AlN/Al 0.85Ga 0.15N heterostructure was grown, fabricated, and electrically characterized, thereby extending the range of Al composition and bandgap for AlGaN channel HEMTs. An etch and regrowth procedure was implemented for source and drain contact formation. A breakdown voltage of 810 V was achieved without a gate insulator or field plate. Excellent gate leakage characteristics enabled a high I on/I off current ratio greater than 10 7 and an excellent subthreshold slope of 75 mV/decade. A large Schottky barrier height of 1.74 eV contributed to these results. In conclusion,more » the room temperature voltage-dependent 3-terminal off-state drain current was adequately modeled with Frenkel-Poole emission.« less

  12. Unprecedented Al supersaturation in single-phase rock salt structure VAlN films by Al+ subplantation

    NASA Astrophysics Data System (ADS)

    Greczynski, G.; Mráz, S.; Hans, M.; Primetzhofer, D.; Lu, J.; Hultman, L.; Schneider, J. M.

    2017-05-01

    Modern applications of refractory ceramic thin films, predominantly as wear-protective coatings on cutting tools and on components utilized in automotive engines, require a combination of excellent mechanical properties, thermal stability, and oxidation resistance. Conventional design approaches for transition metal nitride coatings with improved thermal and chemical stability are based on alloying with Al. It is well known that the solubility of Al in NaCl-structure transition metal nitrides is limited. Hence, the great challenge is to increase the Al concentration substantially while avoiding precipitation of the thermodynamically favored wurtzite-AlN phase, which is detrimental to mechanical properties. Here, we use VAlN as a model system to illustrate a new concept for the synthesis of metastable single-phase NaCl-structure thin films with the Al content far beyond solubility limits obtained with conventional plasma processes. This supersaturation is achieved by separating the film-forming species in time and energy domains through synchronization of the 70-μs-long pulsed substrate bias with intense periodic fluxes of energetic Al+ metal ions during reactive hybrid high power impulse magnetron sputtering of the Al target and direct current magnetron sputtering of the V target in the Ar/N2 gas mixture. Hereby, Al is subplanted into the cubic VN grains formed by the continuous flux of low-energy V neutrals. We show that Al subplantation enables an unprecedented 42% increase in metastable Al solubility limit in V1-xAlxN, from x = 0.52 obtained with the conventional method to 0.75. The elastic modulus is 325 ± 5 GPa, in excellent agreement with density functional theory calculations, and approximately 50% higher than for corresponding films grown by dc magnetron sputtering. The extension of the presented strategy to other Al-ion-assisted vapor deposition methods or materials systems is straightforward, which opens up the way for producing supersaturated single

  13. Corrosion Studies of 2195 Al-Li Alloy and 2219 Al Alloy with Differing Surface Treatments

    NASA Technical Reports Server (NTRS)

    Danford, M. D.; Mendrek, M. J.

    1998-01-01

    Corrosion studies of 2195 Al-Li and 2219 Al alloys have been conducted using the scanning reference electrode technique (SRET) and the polarization resistance (PR) technique. The SRET was used to study corrosion mechanisms, while corrosion rate measurements were studied with the PR technique. Plates of Al203 blasted, soda blasted and conversion coated 2219 Al were coated with Deft primer and the corrosion rates studied with the EIS technique. Results from all of these studies are presented.

  14. Effect of Cooling Rate on Morphology of TiAl3 Particles in Al-4Ti Master Alloy.

    PubMed

    Zhao, Jianhua; Wang, Tao; Chen, Jing; Fu, Lu; He, Jiansheng

    2017-02-27

    The Al-4Ti master alloy was fabricated by aluminum (Al) and sponge titanium particle in a resistance furnace at different cooling rates. This work aims to investigate the relationship between the cooling rate and morphology of TiAl3. The microstructure and composition of master alloys at different cooling rates were characterized and analyzed by optical microscopy (OM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and SEM with energy dispersive spectroscopy (EDS). The results showed that various morphologies of TiAl3 particles in the Al-4Ti master alloy could be acquired at different cooling rates. Petal-like, blocky, and flake-like TiAl3 particles in the Al-4Ti master alloy were respectively acquired at the cooling rates of 3.36 K/s, 2.57 K/s, and 0.31 K/s. It was also found that the morphology of TiAl3 particles in the prepared master alloy changed from petal-like to blocky, then finally to flake-like, with the decrease of cooling rate. In addition, the morphology of the TiAl3 particles has no effect on the phase inversion temperature of Al-4Ti master alloy.

  15. The structural and optical properties of high-Al-content AlInGaN epilayers grown by RF-MBE

    NASA Astrophysics Data System (ADS)

    Wang, Baozhu; An, Tao; Wen, Huanming; Wu, Ruihong; An, Shengbiao; Zhang, Xiuqing; Wang, Xiaoliang

    2008-11-01

    AlInGaN Quaternary Alloys were successfully grown on sapphire substrate by radio-frequency plasma-excited molecular beam epitaxy (RF-MBE). Different Al content AlInGaN quaternary alloys were acquired by changing the Al cell's temperature. The streaky RHEED pattern observed during AlInGaN growth showed the layer-by-layer growth mode. Rutherford back-scattering spectrometry (RBS), X-Ray diffraction (XRD) and Cathodoluminescence (CL) were used to characterize the structural and optical properties of the AlInGaN alloys. The experimental results show that the AlInGaN with appropriate Al cell's temperature, could acquire Al/In ratio near 4.7, then could acquire better crystal and optical quality. The samllest X-ray and CL full-width at half-maximum (FWHM) of the AlInGaN are 5arcmin and 25nm, respectivly. There are some cracks and V-defects occur in high-Al/In-ratio AlInGaN alloys. In the CL image, the cracks and V-defect regions are the emission-enhanced regions. The emission enhancement of the cracked and V-defect regions may be related to the In-segregation.

  16. D'Eichthal and Urbain's "Lettres sur la race noire et la race blanche": race, gender, and reconciliation after slave emancipation.

    PubMed

    Andrews, Naomi J

    2011-01-01

    This article is a close reading of Gustave D'Eichthal and Ishmayl Urbain's Lettres sur la race noire et la race blanche (1839), written during the decade prior to the "second" French emancipation in 1848. The article argues that the hierarchical gendering of race described in the letters is reflective of metropolitan concerns about potential for social disorder accompanying slave emancipation in the French colonies. In arguing for social reconciliation through interracial marriage and its offspring, the symbolically charged figure of the mulatto, the authors deployed gendered and familial language to describe a stable post-emancipation society.

  17. Structures and stabilities of Al(n) (+), Al(n), and Al(n) (-) (n=13-34) clusters.

    PubMed

    Aguado, Andrés; López, José M

    2009-02-14

    Putative global minima of neutral (Al(n)) and singly charged (Al(n) (+) and Al(n) (-)) aluminum clusters with n=13-34 have been located from first-principles density functional theory structural optimizations. The calculations include spin polarization and employ the generalized gradient approximation of Perdew, Burke, and Ernzerhof to describe exchange-correlation electronic effects. Our results show that icosahedral growth dominates the structures of aluminum clusters for n=13-22. For n=23-34, there is a strong competition between decahedral structures, relaxed fragments of a fcc crystalline lattice (some of them including stacking faults), and hexagonal prismatic structures. For such small cluster sizes, there is no evidence yet for a clear establishment of the fcc atomic packing prevalent in bulk aluminum. The global minimum structure for a given number of atoms depends significantly on the cluster charge for most cluster sizes. An explicit comparison is made with previous theoretical results in the range n=13-30: for n=19, 22, 24, 25, 26, 29, 30 we locate a lower energy structure than previously reported. Sizes n=32, 33 are studied here for the first time by an ab initio technique.

  18. Optical microcavities and enhanced electroluminescence from electroformed Al-Al{sub 2}O{sub 3}-Ag diodes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hickmott, T. W.

    Electroluminescence (EL) and electron emission into vacuum (EM) occur when a non-destructive dielectric breakdown of Al-Al{sub 2}O{sub 3}-Ag diodes, electroforming, results in the development of a filamentary region in which current-voltage (I-V) characteristics exhibit voltage-controlled negative resistance. The temperature dependence of I-V curves, EM, and, particularly, EL of Al-Al{sub 2}O{sub 3}-Ag diodes with anodic Al{sub 2}O{sub 3} thicknesses between 12 nm and 30 nm, has been studied. Two filters, a long-pass (LP) filter with transmission of photons with energies less than 3.0 eV and a short-pass (SP) filter with photon transmission between 3.0 and 4.0 eV, have been used to characterize EL. The voltagemore » threshold for EL with the LP filter, V{sub LP}, is ∼1.5 V. V{sub LP} is nearly independent of Al{sub 2}O{sub 3} thickness and of temperature and is 0.3–0.6 V less than the threshold voltage for EL for the SP filter, V{sub SP}. EL intensity is primarily between 1.8 and 3.0 eV when the bias voltage, V{sub S} ≲ 7 V. EL in the thinnest diodes is enhanced compared to EL in thicker diodes. For increasing V{sub S}, for diodes with the smallest Al{sub 2}O{sub 3} thicknesses, there is a maximum EL intensity, L{sub MX}, at a voltage, V{sub LMX}, followed by a decrease to a plateau. L{sub MX} and EL intensity at 4.0 V in the plateau region depend exponentially on Al{sub 2}O{sub 3} thickness. The ratio of L{sub MX} at 295 K for a diode with 12 nm of Al{sub 2}O{sub 3} to L{sub MX} for a diode with 25 nm of Al{sub 2}O{sub 3} is ∼140. The ratio of EL intensity with the LP filter to EL intensity with the SP filter, LP/SP, varies between ∼3 and ∼35; it depends on Al{sub 2}O{sub 3} thickness and V{sub S}. Enhanced EL is attributed to the increase of the spontaneous emission rate of a dipole in a non-resonant optical microcavity. EL photons interact with the Ag and Al films to create surface plasmon polaritons (SPPs) at the metal-Al

  19. Misfit paradox on nucleation potency of MgO and MgAl{sub 2}O{sub 4} for Al

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, D.; Wang, L.

    MgO and MgAl{sub 2}O{sub 4} are believed to be effective heterogeneous nuclei for Al based alloys due to their small lattice misfits with Al. However, there is a strong evidence to suggest that liquid Al reacts with MgO and MgAl{sub 2}O{sub 4} phases but the heterogeneous nucleation behavior of such phases is rarely discussed. In order to identify the nucleation mechanism of Al, under the interference of the chemical reaction, the heterogeneous nucleation process is systematically investigated through thermal analysis and high resolution transmission electron microscopy (HRTEM). The observed multi-nucleation interfaces (Al/MgO, Al/MgAl{sub 2}O{sub 4} and Al/Al{sub 2}O{sub 3}) andmore » scattered experimental undercooling data indicate an independent multi-phase nucleation process in these systems. - Highlights: •Theoretical lattice misfit doesn’t always disclose nucleation potency. •The nucleation of liquid can be triggered by multi-nucleation interfaces. •An independent multi-agents nucleation was verified in the study.« less

  20. Microstructure and Properties of Fe3Al-Fe3AlC x Composite Prepared by Reactive Liquid Processing

    NASA Astrophysics Data System (ADS)

    Verona, Maria Nalu; Setti, Dalmarino; Paredes, Ramón Sigifredo Cortés

    2018-04-01

    A Fe3Al-Fe3AlC x composite was prepared using reactive liquid processing (RLP) through controlled mixture of carbon steel and aluminum in the liquid state. The microstructure and phases of the composite were assessed using X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, optical microscopy, and differential scanning calorimetry. In addition, the density, hardness, microhardness, and elastic modulus were evaluated. The Fe3Al-Fe3AlC x composite consisted of 65 vol pct Fe3Al and 35 vol pct Fe3AlC x ( κ). The κ phase contained 10.62 at. pct C, resulting in the stoichiometry Fe3AlC0.475. The elastic modulus of the Fe3Al-Fe3AlC0.475 composite followed the rule of mixtures. The RLP technique was shown to be capable of producing Fe3Al-Fe3AlC0.475 with a microstructure and properties similar to those achieved using other processing techniques reported in the literature.

  1. Studies of Al-Ti Alloys by SEM

    NASA Astrophysics Data System (ADS)

    Yildiz, K.; Atici, Y.; Keşlİ Oǧlu, K.; Yaşar, E.

    2007-04-01

    Al-Ti (1, 2 wt. %) alloys were investigated by Scanning Electron Microscopy (SEM). SEM observations and energy-dispersive x-ray analyses (EDX) showed that the phase structure of Al-Ti (1 %) alloy at 165 μm/s is composed of Al matrix and C, Ni, Fe and Si particles and the Al-Ti (1 %) alloys at 16 and 8 μm/s have only the Al matrix and C particles. It was also found that the Al-Ti (2 %) form the Al matrix and intermetallic TiAl.

  2. Initial Symptoms of ALS

    MedlinePlus

    ... Chapters Certified Centers and Clinics Support Groups About ALS About Us Our Research In Your Community Advocate ... Diagnosis En español Symptoms The initial symptoms of ALS can be quite varied in different people. One ...

  3. X-ray and optical crystallographic parameters investigations of high frequency induction melted Al-(alpha-Al(2)O(3)) alloys.

    PubMed

    Bourbia, A; Draissia, M; Bedboudi, H; Boulkhessaim, S; Debili, M Y

    2010-01-01

    This article deals with the microstructural strengthening mechanisms of aluminium by means of hard alpha-Al(2)O(3) alumina fine particles. A broad of understanding views covering materials preparations, elaboration process, characterization techniques and associated microstructural characteristic parameters measurements is given. In order to investigate the microstructural characteristic parameters and the mechanical strengthening mechanisms of pure aluminium by hard fine particles, a set of Al-(alpha-Al(2)O(3)) alloys samples were made under vacuum by high fusion temperature melting, the high frequency (HF) process, and rapidly solidified under ambient temperature from a mixture of cold-compacted high-pure fine Al and alpha-Al(2)O(3) powders. The as-solidified Al-(alpha-Al(2)O(3)) alloys were characterized by means of X-ray diffraction (XRD) analyses, optical microscopy observations and Vickers microhardness tests in both brut and heat-treated states. It was found that the as-solidified HF Al-(alpha-Al(2)O(3)) alloys with compositions below 4 wt.% (alpha-Al(2)O(3)) are single-phase microstructures of the solid solution FCC Al phase and over two-phase microstructures of the solid solution FCC Al and the Rhombohedral alpha-Al(2)O(3) phases. The optical micrographs reveal the presence of a grain size refinement in these alloys. Vickers microhardness of the as-solidified Al-(alpha-Al(2)O(3)) is increased by means of pure fine alpha-Al(2)O(3) alumina particles. These combined effects of strengthening and grain size refinement observed in the as-solidified Al-(alpha-Al(2)O(3)) alloys are essentially due to a strengthening of Al by the alpha-Al(2)O(3) alumina particles insertion in the (HF) melted and rapidly solidified alloys.

  4. Applications and non-idealities of submicron Al-AlOx-Nb tunnel junctions

    NASA Astrophysics Data System (ADS)

    Julin, J. K.; Maasilta, I. J.

    2016-10-01

    We have developed a technique to fabricate sub-micron, 0.6 μ {{m}}× 0.6 μ {{m}} Al-AlOx-Nb tunnel junctions using a standard e-beam resist, angle evaporation and double oxidation of the tunneling barrier, resulting in high quality niobium, as determined by the the high measured values of the critical temperature {T}{{C}}˜ 7.5 K and the gap {{Δ }}˜ 1.3 meV. The devices show great promise for local nanoscale thermometry in the temperature range 1-7.5 K. Electrical characterization of the junctions was performed at sub-Kelvin temperatures both with and without an external magnetic field, which was used to suppress superconductivity in Al and thus bring the junction into a normal-metal-insulator-superconductor configuration. We observed excess sub-gap current, which could not be explained by the standard tunneling theory. Evidence points towards materials science issues of the barrier or Nb/AlOx interface as the culprit.

  5. Spectra of surface plasmon polariton enhanced electroluminescence from electroformed Al-Al{sub 2}O{sub 3}-Ag diodes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hickmott, T. W.

    Narrow band-pass filters have been used to measure the spectral distribution of electroluminescent photons with energies between 1.8 eV and 3.0 eV from electroformed Al-Al{sub 2}O{sub 3}-Ag diodes with anodic Al{sub 2}O{sub 3} thicknesses between 12 nm and 18 nm. Electroforming of metal-insulator-metal (MIM) diodes is a non-destructive dielectric breakdown that results in a conducting channel in the insulator and changes the initial high resistance of the MIM diode to a low resistance state. It is a critical step in the development of resistive-switching memories that utilize MIM diodes as the active element. Electroforming of Al-Al{sub 2}O{sub 3}-Ag diodes in vacuum results in voltage-controlledmore » negative resistance (VCNR) in the current-voltage (I-V) characteristics. Electroluminescence (EL) and electron emission into vacuum (EM) develop simultaneously with the current increase that results in VCNR in the I-V characteristics. EL is due to recombination of electrons injected at the Al-Al{sub 2}O{sub 3} interface with radiative defect centers in Al{sub 2}O{sub 3}. Measurements of EL photons between 1.8 eV and 3.0 eV using a wide band-pass filter showed that EL intensity is exponentially dependent on Al{sub 2}O{sub 3} thickness for Al-Al{sub 2}O{sub 3}-Ag diodes between 12 nm and 20 nm thick. Enhanced El intensity in the thinnest diodes is attributed to an increase in the spontaneous emission rate of recombination centers due to high electromagnetic fields generated in Al{sub 2}O{sub 3} when EL photons interact with electrons in Ag or Al to form surface plasmon polaritons at the Al{sub 2}O{sub 3}-Ag or Al{sub 2}O{sub 3}-Al interface. El intensity is a maximum at 2.0–2.2 eV for Al-Al{sub 2}O{sub 3}-Ag diodes with Al{sub 2}O{sub 3} thicknesses between 12 nm and 18 nm. EL in diodes with 12 nm or 14 nm of Al{sub 2}O{sub 3} is enhanced by factors of 8–10 over EL from a diode with 18 nm of Al{sub 2}O{sub 3}. The extent of EL

  6. Room temperature radiolytic synthesized Cu@CuAlO(2)-Al(2)O(3) nanoparticles.

    PubMed

    Abedini, Alam; Saion, Elias; Larki, Farhad; Zakaria, Azmi; Noroozi, Monir; Soltani, Nayereh

    2012-01-01

    Colloidal Cu@CuAlO(2)-Al(2)O(3) bimetallic nanoparticles were prepared by a gamma irradiation method in an aqueous system in the presence of polyvinyl pyrrolidone (PVP) and isopropanol respectively as a colloidal stabilizer and scavenger of hydrogen and hydroxyl radicals. The gamma irradiation was carried out in a (60)Co gamma source chamber with different doses up to 120 kGy. The formation of Cu@CuAlO(2)-Al(2)O(3) nanoparticles was observed initially by the change in color of the colloidal samples from colorless to brown. Fourier transform infrared spectroscopy (FTIR) confirmed the presence of bonds between polymer chains and the metal surface at all radiation doses. Results of transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDX), and X-ray diffraction (XRD) showed that Cu@CuAlO(2)-Al(2)O(3) nanoparticles are in a core-shell structure. By controlling the absorbed dose and precursor concentration, nanoclusters with different particle sizes were obtained. The average particle diameter increased with increased precursor concentration and decreased with increased dose. This is due to the competition between nucleation, growth, and aggregation processes in the formation of nanoclusters during irradiation.

  7. A Comparison of the Behaviour of AlTiB and AlTiC Grain Refiners

    NASA Astrophysics Data System (ADS)

    Schneider, W.; Kearns, M. A.; McGarry, M. J.; Whitehead, A. J.

    AlTiC master alloys present a new alternative to AlTiB grain refiners which have enjoyed pre-eminence in cast houses for several decades. Recent investigations have shown that, under defined casting conditions, AlTiC is a more efficient grain refiner than AlTiB, is less prone to agglomeration and is more resistant to poisoning by Zr, Cr. Moreover it is observed that there are differences in the mechanism of grain refinement for the different alloys. This paper describes the influence of melt temperature and addition rate on the performance of both types of grain refiner in DC casting tests on different wrought alloys. Furthermore the effects of combined additions of the grain refiners and the recycling behaviour of the treated alloys are presented. Results are compared with laboratory test data. Finally, mechanisms of grain refinement are discussed which are consistent with the observed differences in behaviour with AlTiC and AlTiB.

  8. Room-Temperature Quantum Ballistic Transport in Monolithic Ultrascaled Al-Ge-Al Nanowire Heterostructures.

    PubMed

    Sistani, Masiar; Staudinger, Philipp; Greil, Johannes; Holzbauer, Martin; Detz, Hermann; Bertagnolli, Emmerich; Lugstein, Alois

    2017-08-09

    Conductance quantization at room temperature is a key requirement for the utilizing of ballistic transport for, e.g., high-performance, low-power dissipating transistors operating at the upper limit of "on"-state conductance or multivalued logic gates. So far, studying conductance quantization has been restricted to high-mobility materials at ultralow temperatures and requires sophisticated nanostructure formation techniques and precise lithography for contact formation. Utilizing a thermally induced exchange reaction between single-crystalline Ge nanowires and Al pads, we achieved monolithic Al-Ge-Al NW heterostructures with ultrasmall Ge segments contacted by self-aligned quasi one-dimensional crystalline Al leads. By integration in electrostatically modulated back-gated field-effect transistors, we demonstrate the first experimental observation of room temperature quantum ballistic transport in Ge, favorable for integration in complementary metal-oxide-semiconductor platform technology.

  9. Interfacial Characterization of Dissimilar Joints Between Al/Mg/Al-Trilayered Clad Sheet to High-Strength Low-Alloy Steel

    NASA Astrophysics Data System (ADS)

    Macwan, A.; Jiang, X. Q.; Chen, D. L.

    2015-07-01

    Magnesium (Mg) alloys are increasingly used in the automotive and aerospace sectors to reduce vehicle weight. Al/Mg/Al tri-layered clad sheets are deemed as a promising alternative to improve the corrosion resistance and formability of Mg alloys. The structural application of Al/Mg/Al tri-layered clad sheets inevitably involves welding and joining in the multi-material vehicle body manufacturing. This study aimed to characterize the bonding interface microstructure of the Al/Mg/Al-clad sheet to high-strength low-alloy steel with and without Zn coating using ultrasonic spot welding at different levels of welding energy. It was observed that the presence of Zn coating improved the bonding at the interface due to the formation of Al-Zn eutectic structure via enhanced diffusion. At a higher level of welding energy, characteristic flow patterns of Zn into Al-clad layer were observed with an extensive penetration mainly along some high angle grain boundaries. The dissimilar joints without Zn coating made at a high welding energy of 800 J failed partially from the Al/Fe weld interface and partially from the Al/Mg clad interface, while the joints with Zn coating failed from the Al/Mg clad interface due to the presence of brittle Al12Mg17 phase.

  10. [Smoking habits among staff at the Rochefort-sur-Mer Hospital].

    PubMed

    Fougere, B; Underner, M; Ingrand, P; Meurice, J-C

    2011-11-01

    The aim of the study was to establish an inventory of staff in the hospital who smoked to allow better identification of people at risk and thus develop targeted preventive strategies, which we hoped would be more effective. This survey was conducted at the Rochefort-sur-Mer Hospital in March 2008. The sociodemographic characteristics of the population responding and differences in characteristics between smokers and non-smokers were examined. The level of dependence of smokers and patterns of smoking in the workplace were also evaluated. The results were compared with those of the survey "Baromètre tabac personnel hospitalier 2003". The response rate was 57%, with the study population characterized by a high proportion of women (82%). The proportion of smokers was 29%, similar to that found in the general population (30%) but higher than 24% of the survey of hospital staff Tobacco Barometer 2003. The hospital staff is still weakly dependent on tobacco. The attitude to smoking was strongly linked to socioeconomic group and the domestic staff and health care assistants were most likely to smoke and were also the most dependent. Finally, the hospital has itself become a smoke free environment without tobacco. It is essential to promote measures to prevent smoking among hospital staff taking into account its specific features (high proportion of women). Targeted actions should in particular be conducted amongst the groups of workers who are the most affected. Copyright © 2011 SPLF. Published by Elsevier Masson SAS. All rights reserved.

  11. The investigation of Al0.29Ga0.71N/GaN/AlN and AlN/GaN/AlN thin films grown on Si (111) by RF plasma-assisted MBE

    NASA Astrophysics Data System (ADS)

    Yusoff, Mohd Zaki Mohd; Mahyuddin, Azzafeerah; Hassan, Zainuriah; Hassan, Haslan Abu; Abdullah, Mat Johar

    2012-06-01

    Recently, gallium nitride (GaN) and its related compounds involving Al and In have attracted much attention because of their potential to be used as high-efficiency UV light emitting devices, and as high frequency and high power electronic devices. Consequently, the growth and physics of GaN-based materials have attracted remarkable scientific attention. In this work, the growth and characterization of epitaxial Al0.29Ga0.71N and AlN layers grown on Si (111) by RF-plasma assisted molecular beam epitaxy (MBE) are described. The Al mole fraction was derived from the HR-XRD symmetric rocking curve (RC) ω/2θ scans of (0002) plane as x = 0.29. For AlN/GaN/AlN sample, the maximum Raman intensity at 521.53 cm-1 is attributed to crystalline silicon. It was found that the allowed Raman optical phonon mode of GaN, the E1 (high) is clearly visible, which is located at 570.74 cm-1. Photoluminscence (PL) spectrums of both samples have shown sharp and intense band edge emission of GaN without the existence of yellow emission band, showing good crystal quality of the samples have been successfully grown on Si substrate.

  12. Effects of substituting ytterbium for scandium on the microstructure and properties of Al-Sc and Al-Mg-Sc alloys =

    NASA Astrophysics Data System (ADS)

    Tuan, Nguyen Quoc

    Al(Sc) alloys represent a new class of potential alloys for high performance structural applications. The excellent properties obtained from the combination of solid-solution hardening and precipitation hardening in Al-Mg-Sc alloys make these alloys very attractive to automotive, aerospace, and structural applications. However, the Sc high cost limits the applications and the addition of cheaper alloying elements that substitutes partially Sc are not only desirable but crucial. In order to reduce the cost of Sc-containing Al alloys and maintain their mechanical properties, the microstructure and mechanical properties of Al-Sc-Yb and Al-Mg-Sc-Yb alloys in comparison with Al-Sc and Al-Mg-Sc alloys were studied. The results showed the similarity of microstructure, hardness and aging behaviour of Al-0.24Sc-0.07Yb alloy in comparison with Al-0.28Sc alloy and Al-4 wt% Mg-0.3 wt% Sc alloy with Al-4 wt% Mg-0.24 wt% Sc-0.06 wt% Yb alloy. The approximately spheroidal Al3Sc and Al3(Sc,Yb) precipitates were uniformly distributed throughout the alpha-Al matrix. The precipitates remain fully coherent with alpha-Al matrix even after aging at high temperature for long time. In another aspect, the grain refinement in Al-Mg-Sc alloys with and without ultrasonic treatment at various pouring temperatures was investigated. The average grain size of Al-Mg-Sc alloy remarkably decreases by increasing the content of Mg or by adding 0.3 wt% of Sc. The pouring temperature has a strong effect on the microstructure of Al-1Mg-0.3Sc alloy. Lower pouring temperature leads to smaller grain size and more homogeneous microstructure. Ultrasonic vibration proved to be a potential grain refinement technique of Al-1Mg-0.3Sc. Significant grain refinement was obtained by applying ultrasonic treatment within the temperature range from 700 to 740 °C. The corrosion behaviour of Al-Sc, Al-Sc-Yb, Al-Mg, Al-Mg-Sc and Al-Mg-Sc-Yb alloys in 3.5 wt% NaCl solution was investigated by immersion and potentiodynamic

  13. Information non précise sur la taille du pénis en République Démocratique du Congo: à propos de 21 sources

    PubMed Central

    Mulenga, Philippe Cilundika; Kazadi, Alex Bukasa

    2016-01-01

    Introduction La taille du pénis constitue une préoccupation de beaucoup des gens actuellement et certains ne sont pas satisfaits de la dimension de leur pénis comme le montre l’étude de Tiggemann en 2008. Il existe relativement peu d'études sur le pénis en érection. Cela peut refléter les tabous culturels des chercheurs ou des médecins en interaction avec les hommes qui sont dans un état d’excitation sexuelle. Toutes fois, il est important pour les personnes qui annoncent des détails sur la taille du pénis d’annoncer d’abord les repères de la mesure du pénis puis ensuite donner les chiffres que proposent les chercheurs. Méthodes Notre enquête de type descriptif transversale s’est effectuée dans les deux grandes villes de la République Démocratique du Congo à savoir la ville de Kinshasa et la ville de Lubumbashi, pendant une période de deux ans soit de Mai 2014 à Mai 2016. Au total, 21 sources d’information ont constitué notre échantillon dont 8 à Kinshasa et 13 à Lubumbashi et nous avons trouvé cela suffisant car les sujets à caractère sexuel sont souvent rares chez nous. Les paramètres étudiés étaient: la nature de la source, la précision de la technique de la mesure, la présence de référence bibliographique, la longueur annoncée du pénis. Résultats La majorité des sources d’information sont faites des émissions de radio et de télévision (23,8%), ceci pourra s’expliquer par le fait que dans notre milieu il y a de plus en plus des chaines de radio et télévision et surtout dans les grandes villes. Concernant la précision de la technique de la mesure du pénis lors du partage du message sur la taille du pénis, l’étude nous montre que la majorité des sources d’information ne signale pas cela lorsqu’elles annoncent la taille du pénis au public soit 85,7%. Plusieurs sources ne déclarent pas les références bibliographiques (57,1%). Lorsqu’on regarde même les chiffres de la taille du p

  14. Al-Shebab: An Al-Qaeda Affiliate Case Study (2Rev)

    DTIC Science & Technology

    2017-10-01

    explosives and car bombs . Al-Shebab’s joining Al-Qaeda had mutual benefits: AQ’s presence in East Africa dates to Osama Bin Laden’s time in Sudan...1992–1996) and the establishment of cells that perpetrated the August 7, 1998 bombings of the U.S. embassies in Nairobi, Kenya, and Dar es Salaam...to build an emirate in the Gedo region, but the project was crushed by Ethiopian forces after AIAI perpetrated several bombings in Ethiopia.25 The

  15. Human Disturbance and Stage-Specific Habitat Requirements Influence Snowy Plover Site Occupancy during the Breeding Season

    DTIC Science & Technology

    2013-01-01

    120:65–76. Doherty, P. J., and J. A. Heath. 2011. Factors affecting piping plover hatching success on Long Island, New York. J. Wildlife Manage. 75:109...reproductive success and sur- vival. In coastal areas with recreational activity, human disturbance may limit use of otherwise suitable habitat. Snowy...consequences for avian repro- ductive success and survival (Matessi and Bogliani 1999; Doligez et al. 2002; Sergio et al. 2009). Birds should use

  16. Nonequilibrium synthesis of NbAl3 and Nb-Al-V alloys by laser cladding. II - Oxidation behavior

    NASA Technical Reports Server (NTRS)

    Haasch, R. T.; Tewari, S. K.; Sircar, S.; Loxton, C. M.; Mazumder, J.

    1992-01-01

    Isothermal oxidation behaviors of NbAl3 alloy synthesized by laser cladding were investigated at temperatures between 800 and 1400 C, and the effect of vanadium microalloying on the oxidation of the laser-clad alloy was examined. The oxidation kinetics of the two alloys were monitored using thermal gravimetric weight gain data, and the bulk and surface chemistries were analyzed using XRD and XPS, respectively. It was found that NbAl3 did not form an exclusive layer of protective Al2O3. The oxidation products at 800 C were found to be a mixture of Nb2O5 and Al2O3. At 1200 C, a mixture of NbAlO4, Nb2O5, and Al2O3 formed; and at 1400 C, a mixture of NbAlO4, Al2O3, NbO2, NbO(2.432), and Nb2O5 formed. The addition of V led to a dramatic increase of the oxidation rate, which may be related to the formation of (Nb, V)2O5 and VO2, which grows in preference to protective Al2O3.

  17. Photo series for quantifying forest fuels in Mexico: montane subtropical forests of the Sierra Madre del Sur and temperate forests and montane shrubland of the northern Sierra Madre Oriental

    Treesearch

    Jorge E. Morfin-Rios; Ernesto Alvarado-Celestino; Enrique J. Jardel-Pelaez; Robert E. Vihnanek; David K. Wright; Jose M. Michel-Fuentes; Clinton S. Wright; Roger D. Ottmar; David V. Sandberg; Andres Najera-Diaz

    2008-01-01

    Single wide-angle and stereo photographs display a range of forest ecosystems conditions and fuel loadings in montane subtropical forests of the Sierra Madre del Sur and temperate forests and montane shrubland of the northern Sierra Madre Oriental of Mexico. Each group of photographs includes inventory information summarizing overstory vegetation composition and...

  18. Completing the Heterocubane Family [Cp*AlE]4 (E = O, S, Se, and Te) by Selective Oxygenation and Sulfuration of [Cp*Al]4: Density Functional Theory Calculations of [Cp*AlE]4 and Reactivity of [Cp*AlO]4 toward Hydrolysis.

    PubMed

    Stelzer, Adrian C; Hrobárik, Peter; Braun, Thomas; Kaupp, Martin; Braun-Cula, Beatrice

    2016-05-16

    The subvalent aluminum compound [Cp*Al]4 (1) reacts with dioxygen, N2O, or sulfur to yield the heterocubane complexes [Cp*AlX]4 [X = O (2) and S (3)]. Treatment of [Cp*AlO]4 (2) with (tBuO)3SiOH gave [(tBuO)3SiOAlO]4 (6) and Cp*H. The structures and spectroscopic data of the Al clusters are supported by density functional theory (DFT) calculations, which also demonstrate the importance of noncovalent interactions (NCI) in oligomeric Al(I) complexes as well as in [Cp*AlS]4 and the heavier homologues of Se and Te. The computed (27)Al NMR shifts indicate a deshielding at the Al centers with increasing electronegativity of the chalcogen atom as well as significant spin-orbit shielding effects within the heavier heterocubane [Al4E4] cores. Further hydrolysis of 6 with an additional amount of silanol in the presence of water resulted in the formation of [Al4(OH)6(OH2)2(OSiOtBu3)6] (7), which shows a structural motif found in boehmite and diaspore.

  19. Revisiting the Al/Al 2O 3 Interface: Coherent Interfaces and Misfit Accommodation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pilania, Ghanshyam; Thijsse, Barend J.; Hoagland, Richard G.

    We report the coherent and semi-coherent Al/α-Al 2O 3 interfaces using molecular dynamics simulations with a mixed, metallic-ionic atomistic model. For the coherent interfaces, both Al-terminated and O-terminated nonstoichiometric interfaces have been studied and their relative stability has been established. To understand the misfit accommodation at the semi-coherent interface, a 1-dimensional (1D) misfit dislocation model and a 2-dimensional (2D) dislocation network model have been studied. For the latter case, our analysis reveals an interface dislocation structure with a network of three sets of parallel dislocations, each with pure-edge character, giving rise to a pattern of coherent and stacking-fault-like regions atmore » the interface. Structural relaxation at elevated temperatures leads to a further change of the dislocation pattern, which can be understood in terms of a competition between the stacking fault energy and the dislocation interaction energy at the interface. In conclusion, our results are expected to serve as an input for the subsequent dislocation dynamics models to understand and predict the macroscopic mechanical behavior of Al/α-Al 2O 3 composite heterostructures.« less

  20. Revisiting the Al/Al 2O 3 Interface: Coherent Interfaces and Misfit Accommodation

    DOE PAGES

    Pilania, Ghanshyam; Thijsse, Barend J.; Hoagland, Richard G.; ...

    2014-03-27

    We report the coherent and semi-coherent Al/α-Al 2O 3 interfaces using molecular dynamics simulations with a mixed, metallic-ionic atomistic model. For the coherent interfaces, both Al-terminated and O-terminated nonstoichiometric interfaces have been studied and their relative stability has been established. To understand the misfit accommodation at the semi-coherent interface, a 1-dimensional (1D) misfit dislocation model and a 2-dimensional (2D) dislocation network model have been studied. For the latter case, our analysis reveals an interface dislocation structure with a network of three sets of parallel dislocations, each with pure-edge character, giving rise to a pattern of coherent and stacking-fault-like regions atmore » the interface. Structural relaxation at elevated temperatures leads to a further change of the dislocation pattern, which can be understood in terms of a competition between the stacking fault energy and the dislocation interaction energy at the interface. In conclusion, our results are expected to serve as an input for the subsequent dislocation dynamics models to understand and predict the macroscopic mechanical behavior of Al/α-Al 2O 3 composite heterostructures.« less

  1. Associations between trace elements and clinical health parameters in the North Pacific loggerhead sea turtle (Caretta caretta) from Baja California Sur, Mexico.

    PubMed

    Ley-Quiñónez, César Paúl; Rossi-Lafferriere, Natalia Alejandra; Espinoza-Carreon, Teresa Leticia; Hart, Catherine Edwina; Peckham, Sherwood Hoyt; Aguirre, Alfredo Alonso; Zavala-Norzagaray, Alan Alfredo

    2017-04-01

    This study investigated selected trace elements toxicity in sea turtles Caretta caretta population from Baja California Sur (BCS), Mexico, by analyzing associations among Zn, Se, Cu, As, Cd, Ni, Mn, Pb, and Hg with various biochemical parameters (packed cell volume, leukocytes, and selected blood parameters), and whether their concentrations could have an impact on the health status of sea turtles. Blood samples from 22 loggerhead (C. caretta) sea turtles from BCS, Mexico, were collected for trace elements on biochemistry parameter analyses. Significant associations among trace element levels and the biochemistry parameters were found: Cd vs ALP (R 2  = 0.874, p ˂ 0.001), As vs ALP (R 2  = 0.656, p ˂ 0.001), Mn vs ALP (R 2  = 0.834, p ˂ 0.001), and Ni vs LDH (R 2  = 0.587, p ˂ 0.001). This study is the first report of the biochemical parameters of the North Pacific loggerhead sea turtle (C. caretta) from Baja California Sur, Mexico, and it is the first to observe several associations with toxic and essential trace elements. Our study reinforces the usefulness of blood for the monitoring of the levels of contaminating elements and the results suggest that, based on the associations with health clinical parameters, high levels of Cd and As could be representing a risk to the North Pacific loggerhead population health.

  2. Application of Al-2La-1B Grain Refiner to Al-10Si-0.3Mg Casting Alloy

    NASA Astrophysics Data System (ADS)

    Jing, Lijun; Pan, Ye; Lu, Tao; Li, Chenlin; Pi, Jinhong; Sheng, Ningyue

    2018-05-01

    This paper reports the application and microstructure refining effect of an Al-2La-1B grain refiner in Al-10Si-0.3Mg casting alloy. Compared with the traditional Al-5Ti-1B refiner, Al-2La-1B refiner shows better performances on the grain refinement of Al-10Si-0.3Mg alloy. Transmission electron microscopy analysis suggests that the crystallite structure features of LaB6 are beneficial to the heterogeneous nucleation of α-Al grains. Regarding the mechanical performances, tensile properties of Al-10Si-0.3Mg casting alloy are prominently improved, due to the refined microstructures.

  3. Theoretical analysis of compatibility of several reinforcement materials with NiAl and FeAl matrices

    NASA Technical Reports Server (NTRS)

    Misra, Ajay K.

    1989-01-01

    Several potential reinforcement materials were assessed for their chemical, coefficient of thermal expansion (CTE), and mechanical compatibility with the intermetallic matrices based on NiAl and FeAl. Among the ceramic reinforcement materials, Al2O3, TiC, and TiB2, appear to be the optimum choices for NiAl and FeAl matrices. However, the problem of CTE mismatch with the matrix needs to be solved for these three reinforcement materials. Beryllium-rich intermetallic compounds can be considered as potential reinforcement materials provided suitable reaction barrier coatings can be developed for these. Based on preliminary thermodynamic calculations, Sc2O3 and TiC appear to be suitable as reaction barrier coatings for the beryllides. Several reaction barrier coatings are also suggested for the currently available SiC fibers.

  4. Low resistance ohmic contacts to n-GaN and n-AlGaN using NiAl

    NASA Astrophysics Data System (ADS)

    Ingerly, D. B.; Chen, Y.; William, R. S.; Takeuchi, T.; Chang, Y. A.

    2000-07-01

    The intermetallic compound NiAl (50:50 at. %) has been shown to be a low-resistance ohmic contact to n-GaN and n-AlGaN. NiAl contacts on n-GaN (n=2.5×1017cm-3) had a specific contact resistance of 9.4×10-6 Ω cm2 upon annealing at 850 °C for 5 min. NiAl contacts annealed at 900 °C for 5 min in n-Al0.12Ga0.88N (n=2.4×1018cm-3) and n-Al0.18Ga0.82N (n=2.7×1018cm-3) had specific contact resistances of 2.1×10-5 Ω cm2 and 4.7×10-5 Ω cm2, respectively. Additionally, these contacts were subjected to long-term annealing at 600 °C for 100 h. On n-GaN, the contact specific contact resistance degraded from 9.4×10-6 Ω cm2 to 5.3×10-5 Ω cm2 after the long-term anneal. Contacts to n-Al0.18Ga0.82N showed only slight degradation with a change in contact resistance, from 4.7×10-5 Ω cm2 to 9.2×10-5 Ω cm2. These results demonstrate the NiAl has great promise as a stable, low-resistance contact, particularly to n-AlGaN used in high-temperature applications.

  5. How well can wave runup be predicted? comment on Laudier et al. (2011) and Stockdon et al. (2006)

    USGS Publications Warehouse

    Plant, Nathaniel G.; Stockdon, Hilary F.

    2015-01-01

    Laudier et al. (2011) suggested that there may be a systematic bias error in runup predictions using a model developed by Stockdon et al. (2006). Laudier et al. tested cases that sampled beach and wave conditions that differed from those used to develop the Stockdon et al. model. Based on our re-analysis, we found that in two of the three Laudier et al. cases observed overtopping was actually consistent with the Stockdon et al. predictions. In these cases, the revised predictions indicated substantial overtopping with, in one case, a freeboard deficit of 1 m. In the third case, the revised prediction had a low likelihood of overtopping, which reflected a large uncertainty due to wave conditions that included a broad and bi-modal frequency distribution. The discrepancy between Laudier et al. results and our re-analysis appear to be due, in part, to simplifications made by Laudier et al. when they implemented a reduced version of the Stockdon et al. model.

  6. Room Temperature Radiolytic Synthesized Cu@CuAlO2-Al2O3 Nanoparticles

    PubMed Central

    Abedini, Alam; Saion, Elias; Larki, Farhad; Zakaria, Azmi; Noroozi, Monir; Soltani, Nayereh

    2012-01-01

    Colloidal Cu@CuAlO2-Al2O3 bimetallic nanoparticles were prepared by a gamma irradiation method in an aqueous system in the presence of polyvinyl pyrrolidone (PVP) and isopropanol respectively as a colloidal stabilizer and scavenger of hydrogen and hydroxyl radicals. The gamma irradiation was carried out in a 60Co gamma source chamber with different doses up to 120 kGy. The formation of Cu@CuAlO2-Al2O3 nanoparticles was observed initially by the change in color of the colloidal samples from colorless to brown. Fourier transform infrared spectroscopy (FTIR) confirmed the presence of bonds between polymer chains and the metal surface at all radiation doses. Results of transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDX), and X-ray diffraction (XRD) showed that Cu@CuAlO2-Al2O3 nanoparticles are in a core-shell structure. By controlling the absorbed dose and precursor concentration, nanoclusters with different particle sizes were obtained. The average particle diameter increased with increased precursor concentration and decreased with increased dose. This is due to the competition between nucleation, growth, and aggregation processes in the formation of nanoclusters during irradiation. PMID:23109893

  7. Structure of Li5AlS4 and comparison with other lithium-containing metal sulfides

    NASA Astrophysics Data System (ADS)

    Lim, Hanjin; Kim, Sung-Chul; Kim, Jaegyeom; Kim, Young-Il; Kim, Seung-Joo

    2018-01-01

    Lithium aluminum sulfide (Li5AlS4) was synthesized by solid state reaction, and its crystal structure was characterized by ab initio structure determination on the basis of powder neutron diffraction (ND) data. Li5AlS4 was found to have monoclinic unit cell (space group, P21/m) with the lattice parameters: a = 6.8583(4) Å, b = 7.8369(4) Å, c = 6.2488(4) Å, and β = 90.333(4)°. This structure is built from a hexagonal close-packed (hcp) arrangement of sulfur atoms with a stacking sequence of …ABAB…. The hcp sulfide lattice consists of two different double-sulfide layers alternately stacked along the c-axis. Between the first pair of sulfur layers all the tetrahedral interstices (T+ and T- sites) are filled with lithium and aluminum atoms. All octahedral interstices between the second pair of sulfur layers are occupied by the remaining lithium atoms. The structure of Li5AlS4 is compared with those of various lithium-containing metal sulfides like Li2FeS2, NaLiMS2 (M = Zn, Cd), Li4GeS4, LiM‧S2 (M‧ = Al, Ga, In) and γ-Li3PS4. Each sulfide represents a specific distribution of lithium atoms in the lattice depending on how the octahedral and tetrahedral interstitial sites are filled. The low ionic conductivity of Li5AlS4 (9.7 × 10-9 S cm-1 at 323 K) relative to other sulfides may be due to the highly-ordered distribution of the lithium atoms in the layered structure and the lack of adjacent void spaces that can be used for lithium ion hopping.

  8. Restauration fonctionnelle du rachis : effet du niveau initial de douleur sur les performances des sujets lombalgiques chroniques

    PubMed Central

    Caby, Isabelle; Olivier, N; Mendelek, F; Kheir, R Bou; Vanvelcenaher, J; Pelayo, P

    2014-01-01

    HISTORIQUE : La lombalgie chronique est une douleur lombaire persistante d’origine multifactorielle. Le niveau de douleur initial reste faiblement utilisé pour analyser et comparer les réponses des patients lombalgiques au programme de reconditionnement. OBJECTIFS : Apprécier et évaluer les réponses des sujets lombalgiques chroniques très douloureux à une prise en charge dynamique et intensive. MÉTHODOLOGIE : 144 sujets atteints de lombalgie chronique ont été inclus dans un programme de restauration fonctionnelle du rachis de 5 semaines. Les sujets ont été classés en deux groupes de niveau de douleur: un groupe atteint de douleur sévère (n = 28) et un groupe atteint de douleur légère à modérée (n = 106). L’ensemble des sujets ont bénéficié d’une prise en charge identique comprenant principalement de la kinésithérapie, de l’ergothérapie, du reconditionnement musculaire et cardio-vasculaire ainsi qu’un suivi psychologique. Les paramètres physiques (flexibilité, force musculaire) et psychologiques (qualité de vie) ont été mesurés avant (T0) et après le programme (T5sem). RÉSULTATS : L’ensemble des performances physiques et fonctionnelles des sujets très douloureux sont moins bonnes et le retentissement de la lombalgie sur la qualité de vie, pour ces mêmes sujets, est majoré à T0. Toutes les différences significatives constatées à T0 entre les deux groupes s’effacent à T5sem. CONCLUSIONS : Les sujets lombalgiques chroniques très douloureux répondent favorablement au programme dynamique et intensif. L’intensité douloureuse de la lombalgie n’aurait pas d’effet sur les réponses au programme. La restauration fonctionnelle du rachis apporterait aux sujets la possibilité de mieux gérer leur douleur quel que soit son niveau. PMID:25299476

  9. Investigation on Tribological Properties of the Pre-oxidized Ti2AlN/TiAl Composite

    NASA Astrophysics Data System (ADS)

    Wang, Daqun; Sun, Dongli; Han, Xiuli; Wang, Qing; Wang, Guangwei

    2018-03-01

    Different oxidation layers on the Ti2AlN/TiAl substrate which was fabricated by in situ synthesis were prepared through thermal oxidation process. The microstructure, phase identification and elements distribution of the oxidation layers were analyzed. The tribological performance of pre-oxidized composites against Si3N4 ball at 25 and 600 °C, as well as the effect of pre-oxidation layers on tribological performance was systematically investigated. The results show that, compared to Ti2AlN/TiAl, the pre-oxidized composites present more excellent tribological properties, especially the wear resistance at 600 °C. It is a significant finding that, different from severe abrasive wear and plastic deformation of Ti2AlN/TiAl, the tribo-films formed by the pre-oxidation layers on the worn surface of pre-oxidized composites weaken abrasive wear and suppress the development of plastic deformation to protect the underlying composite substrate from wear. Moreover, the stable cooperation on the interface between tribo-films and Si3N4 ball results in the relatively steady friction coefficient.

  10. Luminescence of delafossite-type CuAlO2 fibers with Eu substitution for Al cations

    PubMed Central

    Liu, Yin; Gong, Yuxuan; Mellott, Nathan P.; Wang, Bu; Ye, Haitao; Wu, Yiquan

    2016-01-01

    Abstract CuAlO2 has been examined as a potential luminescent material by substituting Eu for Al cations in the delafossite structure. CuAlO2:Eu3+ nanofibers have been prepared via electrospinning for the ease of mitigating synthesis requirements and for future optoelectronics and emerging applications. Single-phase CuAlO2 fibers could be obtained at a temperature of 1100 °C in air. The Eu was successfully doped in the delafossite structure and two strong emission bands at ~405 and 610 nm were observed in the photoluminescence spectra. These bands are due to the intrinsic near-band-edge transition of CuAlO2 and the f-f transition of the Eu3+ activator, respectively. Further electrical characterization indicated that these fibers exhibit semiconducting behavior and the introduction of Eu could act as band-edge modifiers, thus changing the thermal activation energies. In light of this study, CuAlO2:Eu3+ fibers with both strong photoluminescence and p-type conductivity could be produced by tailoring the rare earth doping concentrations. PMID:27877870

  11. Luminescence of delafossite-type CuAlO2 fibers with Eu substitution for Al cations

    NASA Astrophysics Data System (ADS)

    Liu, Yin; Gong, Yuxuan; Mellott, Nathan P.; Wang, Bu; Ye, Haitao; Wu, Yiquan

    2016-01-01

    CuAlO2 has been examined as a potential luminescent material by substituting Eu for Al cations in the delafossite structure. CuAlO2:Eu3+ nanofibers have been prepared via electrospinning for the ease of mitigating synthesis requirements and for future optoelectronics and emerging applications. Single-phase CuAlO2 fibers could be obtained at a temperature of 1100 °C in air. The Eu was successfully doped in the delafossite structure and two strong emission bands at 405 and 610 nm were observed in the photoluminescence spectra. These bands are due to the intrinsic near-band-edge transition of CuAlO2 and the f-f transition of the Eu3+ activator, respectively. Further electrical characterization indicated that these fibers exhibit semiconducting behavior and the introduction of Eu could act as band-edge modifiers, thus changing the thermal activation energies. In light of this study, CuAlO2:Eu3+ fibers with both strong photoluminescence and p-type conductivity could be produced by tailoring the rare earth doping concentrations.

  12. Luminescence of delafossite-type CuAlO2 fibers with Eu substitution for Al cations.

    PubMed

    Liu, Yin; Gong, Yuxuan; Mellott, Nathan P; Wang, Bu; Ye, Haitao; Wu, Yiquan

    2016-01-01

    CuAlO 2 has been examined as a potential luminescent material by substituting Eu for Al cations in the delafossite structure. CuAlO 2 :Eu 3+ nanofibers have been prepared via electrospinning for the ease of mitigating synthesis requirements and for future optoelectronics and emerging applications. Single-phase CuAlO 2 fibers could be obtained at a temperature of 1100 °C in air. The Eu was successfully doped in the delafossite structure and two strong emission bands at ~405 and 610 nm were observed in the photoluminescence spectra. These bands are due to the intrinsic near-band-edge transition of CuAlO 2 and the f-f transition of the Eu 3+ activator, respectively. Further electrical characterization indicated that these fibers exhibit semiconducting behavior and the introduction of Eu could act as band-edge modifiers, thus changing the thermal activation energies. In light of this study, CuAlO 2 :Eu 3+ fibers with both strong photoluminescence and p-type conductivity could be produced by tailoring the rare earth doping concentrations.

  13. Al-Qaeda in Iraq (AQI): An Al-Qaeda Affiliate Case Study

    DTIC Science & Technology

    2017-10-01

    a comparative methodology that included eight case studies on groups affiliated or associated with Al-Qaeda. These case studies were then used as a... methodology that included eight case studies on groups affiliated or associated with Al-Qaeda. These case studies were then used as a dataset for cross...Case Study Zack Gold With contributions from Pamela G. Faber October 2017 This work was performed under Federal Government

  14. RETRACTED ARTICLE: Microstructure of carbide precipitates in L12-Ni3Al and L10-TiAl

    NASA Astrophysics Data System (ADS)

    Han, Chang Suk

    2008-04-01

    The crystallographic structures of carbide formed in Ni3Al- and TiAl-based intermetallics containing carbon are investigated in this study using transmission electron microscopy. In an L12-ordered Ni3Al alloy with 4 mol.% of chromium and 0.2 mol.% to 3.0 mol.% of carbon, fine octahedral precipitates of M23C6 type carbide were formed in the matrix by aging at temperatures around 973 K after solution annealing at 1423 K. TEM examination revealed that the M23C6 phase and the matrix lattices have a cube-cube orientation relationship and maintain partial atomic matching at the {111} interface. After prolonged aging or by aging at higher temperatures, the M23C6 precipitates adopt a rod-like morphology elongated parallel to the <100> directions. In L10-ordered TiAl containing from 0.1 mol.% to 2.0 mol.% carbon, TEM observations reveal that needle-like precipitates, which lie only in one direction parallel to the [001] axis of the L10 matrix appear in the matrix mainly at dislocations. Selected-area electron diffraction (SAED) patterns analyses showed that the needle-shaped precipitate is perovskite-type Ti3AlC. The orientation relationship between the Ti3AlC and the L10 matrix was found to be (001)Ti3AlC//(001)L10 matrix and [010]Ti3AlC//[010]L10 matrix. By aging at higher temperatures or for a longer period at 1073 K, plate-like precipitates of Ti2AlC with a hexagonal structure form on the {111} planes of the L10 matrix. The orientation relationship between the Ti2AlC and the L10 matrix is (0001)Ti2AlC//(111)L10 matrix and Ti2AlC//L10 matrix.

  15. Structure and Mechanical Properties of CrTiAlN/TiAlN Composite Coatings Deposited by Multi-Arc Ion Plating

    NASA Astrophysics Data System (ADS)

    Yan, Shaojian; Tian, Canxin; Huang, Zhihong; Yang, Bing; Fu, Dejun

    2014-10-01

    CrTiAlN/TiAlN composite coatings were deposited on cemented carbide by using a home-made industrial scale multi-arc ion plating system. The samples were studied by X-ray diffraction, scanning electron microscopy (SEM), microhardness and ball-on-disk testing. The properties of the CrTiAlN/TiAlN coatings were significantly influenced by the microstructure and the deposition time ratio of TiAlN over CrTiAlN layers. With the increase of deposition time ratio, the microhardness of CrTiAlN/TiAlN increased from 28.6 GPa to 37.5 GPa, much higher than that of CrTiAlN coatings. The friction coefficients of the CrTiAlN/TiAlN coatings were higher than those of CrTiAlN coatings against a cemented carbide ball. The microhardness of the CrTiAlN/TiAlN coatings was changed after annealing at 800°C, and the friction coefficients of the annealed coatings were increased against the cemented carbide ball.

  16. First principles study of α2-Ti3Al(0 0 0 1) surface and γ-TiAl(1 1 1)/α2-Ti3Al(0 0 0 1) interfaces

    NASA Astrophysics Data System (ADS)

    Wang, Lu; Shang, Jia-Xiang; Wang, Fu-He; Zhang, Yue

    2013-07-01

    The α2-Ti3Al(0 0 0 1) surface and γ-TiAl(1 1 1)/α2-Ti3Al(0 0 0 1) interfaces with six orientation relationships are studied by using the first-principle density functional theory. The calculated results indicate that the Ti3Al(0 0 0 1) surface has a higher surface energy (1.964 J/m2) and larger surface relaxations, compared with the γ-TiAl(1 1 1) surface. For the γ-TiAl(1 1 1)/α2-Ti3Al(0 0 0 1) interface structures, the work of separation along Ti3Al(0 0 0 1) cleavage plane is larger than that along TiAl(1 1 1) plane. In the interface region, the bonding strengths between Ti3Al layers and between TiAl layers are smaller than those along Ti3Al(0 0 0 1) plane and TiAl(1 1 1) plane in the bulk materials, respectively. The heterogeneous interface would be the weak link in the material, and the bonding strength of interface depends on the weaker one of the two phases. The bonding characteristics of interface are analyzed by the electron local function.

  17. Lignes directrices sur l’aiguillage des cas soupçonnés de cancer du poumon par un médecin de famille ou autre professionnel des soins primaires

    PubMed Central

    Del Giudice, M. Elisabeth; Young, Sheila-Mae; Vella, Emily T.; Ash, Marla; Bansal, Praveen; Robinson, Andrew; Skrastins, Roland; Ung, Yee; Zeldin, Robert; Levitt, Cheryl

    2014-01-01

    Résumé Objectif Les présentes lignes directrices visent à aider les médecins de famille et autres généralistes à reconnaître les manifestations cliniques devant éveiller les soupçons quant à la présence d’un cancer du poumon chez les patients. Composition du comité Les membres du comité ont été choisis parmi les leaders régionaux en soins primaires du Réseau provincial des soins primaires et de la lutte contre le cancer d’Action Cancer Ontario et parmi les membres du Groupe sur le siège de la maladie, Cancer du poumon d’Action Cancer Ontario. Méthodes Les présentes lignes directrices sont le fruit d’une revue systématique des données probantes, d’une synthèse des données et d’un examen externe formel effectué par des intervenants canadiens qui ont validé la pertinence des recommandations. Rapport Ces lignes directrices fondées sur des données probantes ont été formulées pour améliorer la prise en charge en contexte canadien des patients qui présentent des manifestations cliniques du cancer du poumon. Conclusion Le dépistage et l’aiguillage précoces des patients atteints de cancer du poumon pourraient en fin de compte aider à réduire les morbidités et mortalités liées au cancer. Ces lignes directrices pourraient aussi s’avérer utiles dans la mise sur pied de programmes de diagnostic du cancer du poumon et pour aider les décideurs à veiller à ce que les ressources appropriées soient en place.

  18. Inclined dislocation arrays in AlGaN/AlGaN quantum well structures emitting at 290 nm

    NASA Astrophysics Data System (ADS)

    Chang, T. Y.; Moram, M. A.; McAleese, C.; Kappers, M. J.; Humphreys, C. J.

    2010-12-01

    We report on the structural and optical properties of deep ultraviolet emitting AlGaN/AlGaN multiple quantum wells (MQWs) grown on (0001) sapphire by metal-organic vapor phase epitaxy using two different buffer layer structures, one containing a thin (1 μm) AlN layer combined with a GaN interlayer and the other a thick (4 μm) AlN layer. Transmission electron microscopy analysis of both structures showed inclined arrays of dislocations running through the AlGaN layers at an angle of ˜30°, originating at bunched steps at the AlN surface and terminating at bunched steps at the surface of the MQW structure. In all layers, these inclined dislocation arrays are surrounded by AlGaN with a relatively higher Ga content, consistent with plan-view cathodoluminescence maps in which the bunched surface steps are associated with longer emission wavelengths. The structure with the 4 μm-thick AlN buffer layer had a dislocation density lower by a factor of 2 (at (1.7±0.1)×109 cm-2) compared to the structure with the 1 μm thick AlN buffer layer, despite the presence of the inclined dislocation arrays.

  19. EARLY SOLAR NEBULA CONDENSATES WITH CANONICAL, NOT SUPRACANONICAL, INITIAL {sup 26}Al/{sup 27}Al RATIOS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    MacPherson, G. J.; Bullock, E. S.; Janney, P. E.

    2010-03-10

    The short-lived radionuclide {sup 26}Al existed throughout the solar nebula 4.57 Ga ago, and the initial abundance ratio ({sup 26}Al/{sup 27}Al){sub 0}, as inferred from magnesium isotopic compositions of calcium-aluminum-rich inclusions (CAIs) in chondritic meteorites, has become a benchmark for understanding early solar system chronology. Internal mineral isochrons in most CAIs measured by secondary ion mass spectrometry (SIMS) give ({sup 26}Al/{sup 27}Al){sub 0} {approx} (4-5) x 10{sup -5}, called 'canonical'. Some recent high-precision analyses of (1) bulk CAIs measured by multicollector inductively coupled plasma mass spectrometry (MC-ICPMS), (2) individual CAI minerals and their mixtures measured by laser-ablation MC-ICPMS, and (3)more » internal isochrons measured by multicollector (MC)-SIMS indicated a somewhat higher 'supracanonical' ({sup 26}Al/{sup 27}Al){sub 0} ranging from (5.85 {+-} 0.05) x 10{sup -5} to >7 x 10{sup -5}. These measurements were done on coarse-grained Type B and Type A CAIs that probably formed by recrystallization and/or melting of fine-grained condensate precursors. Thus the supracanonical ratios might record an earlier event, the actual nebular condensation of the CAI precursors. We tested this idea by performing in situ high-precision magnesium isotope measurements of individual minerals in a fine-grained CAI whose structures and volatility-fractionated trace element abundances mark it as a primary solar nebula condensate. Such CAIs are ideal candidates for the fine-grained precursors to the coarse-grained CAIs, and thus should best preserve a supracanonical ratio. Yet, our measured internal isochron yields ({sup 26}Al/{sup 27}Al){sub 0} = (5.27 {+-} 0.17) x 10{sup -5}. Thus our data do not support the existence of supracanonical ({sup 26}Al/{sup 27}Al){sub 0} = (5.85-7) x 10{sup -5}. There may not have been a significant time interval between condensation of the CAI precursors and their subsequent melting into coarse

  20. Relations de Dispersion et Diffusion des Glueballs et des Mesons dans la Theorie de Jauge U(1)(2+1) Compacte

    NASA Astrophysics Data System (ADS)

    Ahmed, Chaara El Mouez

    Nous avons etudie les relations de dispersion et la diffusion des glueballs et des mesons dans le modele U(1)_{2+1} compact. Ce modele a ete souvent utilise comme un simple modele de la chromodynamique quantique (QCD), parce qu'il possede le confinement ainsi que les etats de glueballs. Par contre, sa structure mathematique est beaucoup plus simple que la QCD. Notre methode consiste a diagonaliser l'Hamiltonien de ce modele dans une base appropriee de graphes et sur reseau impulsion, afin de generer les relations de dispersion des glueballs et des mesons. Pour la diffusion, nous avons utilise la methode dependante du temps pour calculer la matrice S et la section efficace de diffusion des glueballs et des mesons. Les divers resultats obtenus semblent etre en accord avec les travaux anterieurs de Hakim, Alessandrini et al., Irving et al., qui eux, utilisent plutot la theorie des perturbations en couplage fort, et travaillent sur un reseau espace-temps.

  1. In situ microscopy of rapidly heated nano-Al and nano-Al/WO{sub 3} thermites

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sullivan, Kyle T.; Zachariah, Michael R.; Chiou, Wen-An

    2010-09-27

    The initiation and reaction mechanism of nano-Al and nano-Al thermites in rapid heating environments is investigated in this work. A semiconductor-based grid/stage was used, capable of in situ heating of a sample from room temperature to 1473 K, and at a rate of 10{sup 6} K/s, inside an electron microscope. Nano-Al was rapidly heated in a transmission electron microscope, and before and after images indicate that the aluminum migrates through the shell, consistent with a diffusion-based mechanism. A nano-Al/WO{sub 3} composite was then heated in a scanning electron microscope. The results indicate that a reactive sintering mechanism is occurring formore » the nano-Al/WO{sub 3} thermite, as the products are found to be in surface contact and significantly deformed after the heating pulse.« less

  2. Effect of Al content on impact resistance behavior of Al-Ti-B4C composite fabricated under air atmosphere.

    PubMed

    Zhao, Qian; Liang, Yunhong; Zhang, Zhihui; Li, Xiujuan; Ren, Luquan

    2016-12-01

    Reaction behavior, mechanical property and impact resistance of TiC-TiB 2 /Al composite reacted from Al-Ti-B 4 C system with various Al content via combination method of combustion synthesis and hot pressed sintering under air was investigated. Al content was the key point to the variation of mechanical property and impact resistance. Increasing Al content could increase the density, strength and toughness of the composite. Due to exorbitant ceramic content, 10wt.% and 20wt.% Al-Ti-B 4 C composites exhibited poor molding ability and machinability. Flexural strength, fracture toughness, compressive strength and impact toughness of 30-50wt.% Al-Ti-B 4 C composite were higher than those of Al matrix. The intergranular fracture dispersed and defused impact load and restricted crack extension, enhancing the impact resistance of the composite. The composite with 50wt.% Al content owned highest mechanical properties and impact resistance. The results were useful for the application of TiC-TiB 2 /Al composite in impact resistance field of ceramic reinforced Al matrix composite. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Presymptomatic ALS genetic counseling and testing

    PubMed Central

    Stanislaw, Christine; Reyes, Eliana; Hussain, Sumaira; Cooley, Anne; Fernandez, Maria Catalina; Dauphin, Danielle D.; Michon, Sara-Claude; Andersen, Peter M.; Wuu, Joanne

    2016-01-01

    Remarkable advances in our understanding of the genetic contributions to amyotrophic lateral sclerosis (ALS) have sparked discussion and debate about whether clinical genetic testing should routinely be offered to patients with ALS. A related, but distinct, question is whether presymptomatic genetic testing should be offered to family members who may be at risk for developing ALS. Existing guidelines for presymptomatic counseling and testing are mostly based on small number of individuals, clinical judgment, and experience from other neurodegenerative disorders. Over the course of the last 8 years, we have provided testing and 317 genetic counseling sessions (including predecision, pretest, posttest, and ad hoc counseling) to 161 first-degree family members participating in the Pre-Symptomatic Familial ALS Study (Pre-fALS), as well as testing and 75 posttest counseling sessions to 63 individuals with familial ALS. Based on this experience, and the real-world challenges we have had to overcome in the process, we recommend an updated set of guidelines for providing presymptomatic genetic counseling and testing to people at high genetic risk for developing ALS. These recommendations are especially timely and relevant given the growing interest in studying presymptomatic ALS. PMID:27194384

  4. Slow positrons in single-crystal samples of Al and Al-AlxOy

    NASA Astrophysics Data System (ADS)

    Lynn, K. G.; Lutz, H.

    1980-11-01

    Well-characterized Al(111) and Al(100) samples were studied with monoenergetic positrons before and after exposure to oxygen. Both positronium-formation and positron-emission curves were obtained for various incident positron energies at sample temperatures ranging from 160-900 K. The orthopositronium decay signal provides a unique signature that the positron has emerged from the surface region of a clean metal. In the clean Al crystals part of the positronium formed near the surface is found to be associated with a temperature-activated process described as the thermally activated detrapping of a positron from a surface state. A simple positron diffusion model, including surface and vacancy trapping, is fitted to the positronium data and an estimate of the binding energy of the positron in this trap is made. The positron diffusion constant is found to have a negative temperature dependence before the onset of positron trapping at thermally generated monovacancies (>500 K), in reasonable agreement with theoretical predictions. The depth of the positron surface state is reduced or positronium is formed in the chemisorbed layer as oxygen is adsorbed on both Al sample surfaces, thus increasing the positronium fraction and decreasing the positron emission. At higher oxygen exposures [>500 L (1 L = 10-6 torr sec)] positron or positronium traps are generated in the overlayer and the positronium fraction is reduced. The amorphous-to-crystalline surface transition of AlxOy on Al is observed between 650 and 800 K by the change in the positronium fraction and is interpreted as the removal of trapping centers in the metal-oxide overlayer. At the higher temperatures and incident energies vacancy trapping is observed by the decrease in the positron diffusion length in both the clean and the underlying Al of the oxygen-exposed samples. Similar vacancy formation enthalpies for Al are extracted in both the clean and oxygen-covered samples by a simple model and are in good

  5. AL Amyloidosis

    PubMed Central

    2012-01-01

    Definition of the disease AL amyloidosis results from extra-cellular deposition of fibril-forming monoclonal immunoglobulin (Ig) light chains (LC) (most commonly of lambda isotype) usually secreted by a small plasma cell clone. Most patients have evidence of isolated monoclonal gammopathy or smoldering myeloma, and the occurrence of AL amyloidosis in patients with symptomatic multiple myeloma or other B-cell lymphoproliferative disorders is unusual. The key event in the development of AL amyloidosis is the change in the secondary or tertiary structure of an abnormal monoclonal LC, which results in instable conformation. This conformational change is responsible for abnormal folding of the LC, rich in β leaves, which assemble into monomers that stack together to form amyloid fibrils. Epidemiology AL amyloidosis is the most common type of systemic amyloidois in developed countries with an estimated incidence of 9 cases/million inhabitant/year. The average age of diagnosed patients is 65 years and less than 10% of patients are under 50. Clinical description The clinical presentation is protean, because of the wide number of tissues or organs that may be affected. The most common presenting symptoms are asthenia and dyspnoea, which are poorly specific and may account for delayed diagnosis. Renal manifestations are the most frequent, affecting two thirds of patients at presentation. They are characterized by heavy proteinuria, with nephrotic syndrome and impaired renal function in half of the patients. Heart involvement, which is present at diagnosis in more than 50% of patients, leading to restrictive cardiopathy, is the most serious complication and engages prognosis. Diagnostic methods The diagnosis relies on pathological examination of an involved site showing Congo red-positive amyloid deposits, with typical apple-green birefringence under polarized light, that stain positive with an anti-LC antibody by immunohistochemistry and/or immunofluorescence. Due to the

  6. Referral bias in ALS epidemiological studies.

    PubMed

    Logroscino, Giancarlo; Marin, Benoit; Piccininni, Marco; Arcuti, Simona; Chiò, Adriano; Hardiman, Orla; Rooney, James; Zoccolella, Stefano; Couratier, Philippe; Preux, Pierre-Marie; Beghi, Ettore

    2018-01-01

    Despite concerns about the representativeness of patients from ALS tertiary centers as compared to the ALS general population, the extent of referral bias in clinical studies remains largely unknown. Using data from EURALS consortium we aimed to assess nature, extent and impact of referral bias. Four European ALS population-based registries located in Ireland, Piedmont, Puglia, Italy, and Limousin, France, covering 50 million person-years, participated. Demographic and clinic characteristics of ALS patients diagnosed in tertiary referral centers were contrasted with the whole ALS populations enrolled in registries in the same geographical areas. Patients referred to ALS centers were younger (with difference ranging from 1.1 years to 2.4 years), less likely to present a bulbar onset, with a higher proportion of familial antecedents and a longer survival (ranging from 11% to 15%) when compared to the entire ALS population in the same geographic area. A trend for referral bias is present in cohorts drawn from ALS referral centers. The magnitude of the possible referral bias in a particular tertiary center can be estimated through a comparison with ALS patients drawn from registry in the same geographic area. Studies based on clinical cohorts should be cautiously interpreted. The presence of a registry in the same area may improve the complete ascertainment in the referral center.

  7. Referral bias in ALS epidemiological studies

    PubMed Central

    Marin, Benoit; Piccininni, Marco; Arcuti, Simona; Chiò, Adriano; Hardiman, Orla; Rooney, James; Zoccolella, Stefano; Couratier, Philippe; Preux, Pierre-Marie; Beghi, Ettore

    2018-01-01

    Background Despite concerns about the representativeness of patients from ALS tertiary centers as compared to the ALS general population, the extent of referral bias in clinical studies remains largely unknown. Using data from EURALS consortium we aimed to assess nature, extent and impact of referral bias. Methods Four European ALS population-based registries located in Ireland, Piedmont, Puglia, Italy, and Limousin, France, covering 50 million person-years, participated. Demographic and clinic characteristics of ALS patients diagnosed in tertiary referral centers were contrasted with the whole ALS populations enrolled in registries in the same geographical areas. Results Patients referred to ALS centers were younger (with difference ranging from 1.1 years to 2.4 years), less likely to present a bulbar onset, with a higher proportion of familial antecedents and a longer survival (ranging from 11% to 15%) when compared to the entire ALS population in the same geographic area. Conclusions A trend for referral bias is present in cohorts drawn from ALS referral centers. The magnitude of the possible referral bias in a particular tertiary center can be estimated through a comparison with ALS patients drawn from registry in the same geographic area. Studies based on clinical cohorts should be cautiously interpreted. The presence of a registry in the same area may improve the complete ascertainment in the referral center. PMID:29659621

  8. Oxygen-induced Al surface segregation in Al(x)Ga(1-x)As and the effect of Y overlayers on the oxidation of the Y/Al(x)Ga(1-x)As interface

    NASA Technical Reports Server (NTRS)

    Mesarwi, A.; Ignatiev, A.

    1992-01-01

    The oxidation of Al(x)Ga(1-x)As (x = 0.15, AlGaAs) was studied by AES and XPS at 350 C and different oxygen exposures (up to 5 x 10 exp 4 L). Also studied were the effects of yttrium overlayers (theta = 3 ML) on the oxidation of the AlGaAs surface. Substantial oxygen-induced Al surface segregation has been observed for both yttriated and nonyttriated AlGaAs surfaces which increased with increasing oxygen exposure. Also observed is a significant Y-enhanced oxidation of the AlGaAs surface. Oxidation of the yttriated AlGaAs surface was found to be a factor of 4 greater than that of the nonyttriated surface. Also, while oxidation of the nonyttriated AlGaAs yielded mainly Al2O(x) (x less than 3) and only little Ga2O3, the yttriated AlGaAs surface oxide layer was principally Ga2O3 and stoichiometric Al2O3. However, both the yttriated and nonyttriated surfaces were found to contain metallic As within the oxide layer.

  9. An Experimental Investigation of Effects of Fluxes (Na3AlF6 and K2TiF6), Element Alloys (Mg), and Composite Powders ((Al + TiC)CP and (Al + B4C)CP) on Distribution of Particles and Phases in Al-B4C and Al-TiC Composites

    NASA Astrophysics Data System (ADS)

    Mazaheri, Younes; Emadi, Rahmatollah; Meratian, Mahmood; Zarchi, Mehdi Karimi

    2017-04-01

    The wettability, incorporation, and gravity segregation of TiC and B4C particles into molten aluminum are important problems in the production of Al-TiC and Al-B4C composites by the casting techniques. In order to solve these problems, different methods consisting of adding the Na3AlF6 and K2TiF6 fluxes and Mg (as the alloying element) into the molten aluminum and injection of the (Al + TiC)CP and (Al + B4C)CP composite powders instead of B4C and TiC particles are evaluated. In this work, the conditions of sample preparation, such as particle addition temperature, stirring speed, and stirring time, are determined after many studies and tests. Microstructural characterizations of samples are investigated by scanning electron microscopy equipped with energy dispersive spectroscopy (EDS) and X-ray diffractometry. The results show better distribution and incorporation of TiCp and B4Cp in aluminum matrix when the fluxes are used, as well as EDS analysis of the interface between the matrix and reinforcement-strengthened formation of the different phases such as Al4C3 in the Al-TiC composites and Al3BC, TiB2 in the Al-B4C composites.

  10. L'ostéotomie fémorale de varisation par ouverture externe pour les gonarthroses fémoro-tibiales latérales sur genuvalgum idiopathique: étude rétrospective de 10 cas

    PubMed Central

    Cheikh, Asma Ben; Maitigue, Mahmoud Ben; Masmoudi, Karim; Mouelhi, Thabet; Naouar, Nader; Grissa, Yamen; Bouattour, Karim; Osman, Walid; Ben Ayeche, Mohamed Laziz

    2017-01-01

    L'ostéotomie fémorale de varisation est un traitement conservateur des gonarthroses uni-compartimentales externes qui reste de pratique peu courante et dont les résultats sont peu étudiés. L'objectif de ce travail était d'évaluer les résultats cliniques et radiologiques de l'ostéotomie fémorale de varisation chez les sujets présentant une gonarthrose fémoro-tibiale externe sur genou valgum idiopathique répertoriés sur une période de 21 ans(de 1992 à 2013) au service d'Orthopédie du CHU Sahloul à Sousse. L'évaluation clinique des patients a été faite à partir du score IKS (International Knee Society). L'évaluation radiologique a été basée sur un bilan pré opératoire et un bilan au dernier recul. L'étude portait sur une série de 9 patients (et 10 genoux) dont l'âge moyen était de 45,2 ans avec un sex ratio de 0,5. Le recul moyen était de 99 mois. Le score genou moyen est passé de 48,4 points en préopératoire à 73,5 points au dernier recul avec une amélioration statistiquement significative (p<10-3). Le score fonctionnel moyen s'est amélioré d'une façon significative avec une valeur préopératoire de 49,5 points et une valeur 72 pointsau dernier recul. La correction finale a permis de réduire le valgus à une moyenne de 3,7° pour une valeur pré-opératoire de 14°. Cette étude, ainsi que l'analyse de la littérature, nous ont permis de déduire que l'ostéotomie fémorale de varisation est l'indication de choix dans les genuvalgum invalidant d'origine fémorale, en l'absence d'arthrite rhumatismale, de surcharge pondérale, d'arthrose fémoro-tibiale interne ou fémoro-patellaire sévère. PMID:29138658

  11. Surgery for Gynecomastia in the Islamic Golden Age: Al-Tasrif of Al-Zahrawi (936-1013 AD).

    PubMed

    Chavoushi, Seyed Hadi; Ghabili, Kamyar; Kazemi, Abdolhassan; Aslanabadi, Arash; Babapour, Sarah; Ahmedli, Rafail; Golzari, Samad E J

    2012-01-01

    The rise of European science during the Renaissance is greatly indebted to the flourishing of the sciences during the Islamic Golden Age. However, some believe that medieval Islamic physicians and in particular surgeons had been merely a medium for Greco-Roman ideas. Contrarily, in some medieval Islamic medical books, such as Al-Tasrif of Al-Zahrawi (936-1013), the surgical instructions represent a change in the usual techniques or are accompanied by a case history, implying that the procedure was actually undertaken. Along with the hundreds of chapters on different diseases and related medical and surgical treatments, Al-Tasrif includes a chapter on surgical techniques for gynecomastia. The present paper is a review of the description of the surgical management of gynecomastia by Al-Zahrawi as well as that of the ancient Greek, medieval, and modern medicine. Although Al-Zahrawi seemed to base his descriptions of surgery for gynecomastia upon those of Paulus of Aegina, his modification of the procedure and application of the medicinal substances might be indicative of Al-Zahrawi's own practice of the procedure. Al-Zahrawi's surgical procedures remained unchanged for many centuries thenceforward until the technological evolution in the recent centuries.

  12. Cost-Effective TiAl based Materials

    NASA Technical Reports Server (NTRS)

    Moxson, V. S.; Sun, Fusheng; Draper, Susan L.; Froes, F. H.; Duz, V.

    2003-01-01

    Because of their inherent low ductility, TiAl-based materials are difficult to fabricate, especially thin gage titanium gamma aluminide (TiAl) sheet and foil. In this paper, an innovative powder metallurgy approach for producing cost-effective thin gage TiAl sheets (with 356 mm long and 235 mm wide, and a thickness of 0.74, 1.09, 1.55, and 2.34 mm, respectively) is presented. The microstructures and tensile properties at room and elevated temperatures of the thin gage TiAl are studied. Results show that these TiAl sheets have a relatively homogenous chemistry, uniform microstructure, and acceptable mechanical properties. This work demonstrates a cost-effective method for producing both flat products (sheet/foil) and complex chunky parts of TiAl for various advanced applications including aerospace and automotive industries.

  13. Systems Engineering Techniques for ALS Decision Making

    NASA Technical Reports Server (NTRS)

    Rodriquez, Luis F.; Drysdale, Alan E.; Jones, Harry; Levri, Julie A.

    2004-01-01

    The Advanced Life Support (ALS) Metric is the predominant tool for predicting the cost of ALS systems. Metric goals for the ALS Program are daunting, requiring a threefold increase in the ALS Metric by 2010. Confounding the problem, the rate new ALS technologies reach the maturity required for consideration in the ALS Metric and the rate at which new configurations are developed is slow, limiting the search space and potentially giving the perspective of a ALS technology, the ALS Metric may remain elusive. This paper is a sequel to a paper published in the proceedings of the 2003 ICES conference entitled, "Managing to the metric: an approach to optimizing life support costs." The conclusions of that paper state that the largest contributors to the ALS Metric should be targeted by ALS researchers and management for maximum metric reductions. Certainly, these areas potentially offer large potential benefits to future ALS missions; however, the ALS Metric is not the only decision-making tool available to the community. To facilitate decision-making within the ALS community a combination of metrics should be utilized, such as the Equivalent System Mass (ESM)-based ALS metric, but also those available through techniques such as life cycle costing and faithful consideration of the sensitivity of the assumed models and data. Often a lack of data is cited as the reason why these techniques are not considered for utilization. An existing database development effort within the ALS community, known as OPIS, may provide the opportunity to collect the necessary information to enable the proposed systems analyses. A review of these additional analysis techniques is provided, focusing on the data necessary to enable these. The discussion is concluded by proposing how the data may be utilized by analysts in the future.

  14. Evaluation of aerial microbial pollutants in Al-Haram Al-Nabawi during pilgrimage of 2013.

    PubMed

    Alananbeh, Kholoud M; Boquellah, Nahla; Kaff, Nadia Al; Ahmadi, Majid Al

    2017-01-01

    Al-Madinah Al-Munawwarah is the second holiest site in Islam. The possibility of new emerging microbes is valid due to the increased number of pilgrims. The objectives of the current study were to estimate the numbers of fungi and bacteria inside and outside Al-Haram Al-Nabawi and to find whether new bacterial and fungal species have emerged compared to previous studies. Air samples were collected twice a day from 12 spots and four directions during the pilgrim year of 2013 for four consecutive weeks by using the sedimentation method. Thirty five genera and fifty eight species were identified. The most recovered bacterial genera were Staphylococcus, Micrococcus, Bacillus, and Dermacoccus with 32.47%, 18.18%, 12.85%, and 11.23%, respectively. Fifty nine isolates of fungi were molecularly identified. Aspergillus species had the highest percentage (78%). The other fungal genera identified ( Alternaria triticina , Emericella nidulans , Emericella striata , Mucor circinelloides , Penicillium chrysogenum , Penicillium minioluteum , Rhizopus arrhizus , Rhizopus oryzae , and Syncephalastrum racemosum ) had less than 5% frequency. In places such as Al-Haram Al-Nabawi, a large and crowded public (millions) exist especially during pilgrimages and Ramadan, thus, exposure to microorganisms is high. On the other hand, microorganism infectivity depends on many factors including their virulence, landing site, and person's immunity. For those reasons, many aspects should be considered to avoid aerosol contaminants.

  15. AlN and Al oxy-nitride gate dielectrics for reliable gate stacks on Ge and InGaAs channels

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Guo, Y.; Li, H.; Robertson, J.

    2016-05-28

    AlN and Al oxy-nitride dielectric layers are proposed instead of Al{sub 2}O{sub 3} as a component of the gate dielectric stacks on higher mobility channels in metal oxide field effect transistors to improve their positive bias stress instability reliability. It is calculated that the gap states of nitrogen vacancies in AlN lie further away in energy from the semiconductor band gap than those of oxygen vacancies in Al{sub 2}O{sub 3}, and thus AlN might be less susceptible to charge trapping and have a better reliability performance. The unfavourable defect energy level distribution in amorphous Al{sub 2}O{sub 3} is attributed tomore » its larger coordination disorder compared to the more symmetrically bonded AlN. Al oxy-nitride is also predicted to have less tendency for charge trapping.« less

  16. Influence of Content of Al2O3 on Structure and Properties of Nanocomposite Nb-B-Al-O films

    NASA Astrophysics Data System (ADS)

    Liu, Na; Dong, Lei; Dong, Lei; Yu, Jiangang; Pan, Yupeng; Wan, Rongxin; Gu, Hanqing; Li, Dejun

    2015-11-01

    Nb-B-Al-O nanocomposite films with different power of Al2O3 were successfully deposited on the Si substrate via multi-target magnetron co-sputtering method. The influences of Al2O3's content on structure and properties of obtained nanocomposite films through controlling Al2O3's power were investigated. Increasing the power of Al2O3 can influence the bombarding energy and cause the momentum transfer of NbB2. This can lead to the decreasing content of Al2O3. Furthermore, the whole films showed monocrystalline NbB2's (100) phase, and Al2O3 shaded from amorphous to weak cubic-crystalline when decreasing content of Al2O3. This structure and content changes were proof by X-ray diffraction (XRD) and high-resolution transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). When NbB2 grains were far from each other in lower power of Al2O3, the whole films showed a typical nanocomposite microstructure with crystalline NbB2 grains embedded in a matrix of an amorphous Al2O3 phase. Continuing increasing the power of Al2O3, the less content of Al2O3 tended to cause crystalline of cubic-Al2O3 between the close distances of different crystalline NbB2 grains. The appearance of cubic-crystallization Al2O3 can help to raise the nanocomposite films' mechanical properties to some extent. The maximum hardness and elastic modulus were up to 21.60 and 332.78 GPa, which were higher than the NbB2 and amorphous Al2O3 monolithic films. Furthermore, this structure change made the chemistry bond of O atom change from the existence of O-Nb, O-B, and O-Al bonds to single O-Al bond and increased the specific value of Al and O. It also influenced the hardness in higher temperature, which made the hardness variation of different Al2O3 content reduced. These results revealed that it can enhance the films' oxidation resistance properties and keep the mechanical properties at high temperature. The study highlighted the importance of controlling the Al2O3's content to prepare

  17. Microstructural analysis of Ti/Al/Ti/Au ohmic contacts to n-AlGaN/GaN

    NASA Astrophysics Data System (ADS)

    Chen, J.; Ivey, D. G.; Bardwell, J.; Liu, Y.; Tang, H.; Webb, J. B.

    2002-05-01

    To develop high quality AlGaN/GaN heterostructure field effect transistors for use in high power, high frequency, and high temperature applications, low resistance, thermal stable ohmic contacts with good surface morphology are essential. Low specific contact resistances have been achieved using an Au/Ti/Al/Ti contact: a minimum value of 6.33×10-6 Ω cm2 was attained after annealing at 700 °C for 30 s. Microstructural analysis using transmission electron microscopy indicated that there is significant interaction between the metallization components and the semiconductor during annealing. The optimum electrical properties correspond to a microstructure that consists of Au2Ti and TiAl layers as well as of a thin Ti-rich layer (~10 nm thick) at the metallization/AlGaN interface. Degradation of the contact occurred for annealing temperatures in excess of 750 °C, and was accompanied by decomposition of the AlGaN layer and formation of a Au-Ti-Al-Ga quaternary phase.

  18. Characterization of oxide nanoparticles in Al-free and Al-containing oxide dispersion strengthened ferritic steels.

    PubMed

    Lee, Jae Hoon; Kim, Jeoung Han

    2013-09-01

    Oxide nanoparticles in oxide dispersion strengthened (ODS) ferritic steels with and without Al have been characterized by transmission electron microscopy. It is confirmed that most of the complex oxide particles consist of Y2TiO5 for 18Cr-ODS steel and YAlO3 or YAl5O12 for 18Cr5Al-ODS steel, respectivley. The addition of 5% Al in 18Cr-ODS steel leads to the formation of larger oxide particles and the reduction in their number density. For 18Cr-ODS steel, 87% of the oxide particles are coherent. The misfit strain of the coherent particles and a few semi-coherent particles is about 0.034 and 0.056, respectively. For 18Cr5Al-ODS steel, 75% of the oxide particles are semi-coherent, of which the misfit strain is 0.091 and 0.125, respectively. These results suggest that for the Al-containing ODS steel the Al addition accelerates the formation of semi-coherent oxide particles and its larger coherent and semi-coherent particles result in the larger misfit strain between the oxide particle and alloy matrix, indicating that the coherence of oxide nanoparticles in ODS steels is size-dependent.

  19. Microstructural evolution of single Ni 2TiAl or hierarchical NiAl/Ni 2 TiAl precipitates in Fe-Ni-Al-Cr-Ti ferritic alloys during thermal treatment for elevated-temperature applications

    DOE PAGES

    Song, Gian; Sun, Zhiqian; Poplawsky, Jonathan D.; ...

    2017-01-07

    Precipitate features, such as the size, morphology, and distribution, are important parameters determining the mechanical properties of semi- or fully-coherent precipitatehardened alloys at elevated temperatures. In this study, the microstructural formation and evolution of recently-developed Fe-Ni-Al-Cr-Ti alloys with superior creep resistance have been systematically investigated using transmission-electron microscopy (TEM), scanning-electron microscopy (SEM), and atom-probe tomography (APT). These alloys were designed by adding 2 or 4 weight percent (wt. %) Ti into a NiAl-hardened ferritic alloy with a nominal composition of Fe-6.5Al-10Cr-10Ni-3.4Mo-0.25Zr-0.005B in wt. %. These alloys were, then, subjected to a homogenization treatment at 1,473 K for 0.5 hour, followedmore » by aging treatments at 973 K for 1 ~ 500 hours. In the homogenization-treated case, both alloys contain a primary L21-type Ni 2TiAl precipitate, but with the distinct size and morphology of the precipitates and precipitate/matrix interface structures. In the subsequent aging treatments, the 2 wt. % Ti alloy establishes a hierarchical-precipitate structure consisting of a fine network of a B2-type NiAl phase within the parent L2 1-type Ni2TiAl precipitate, while the 4 wt. % Ti alloy retains the single Ni 2TiAl precipitate. It was found that the hierarchical structure is more effective in remaining the coherent interface during the growth/coarsening of the precipitate. The formation of the different types of the precipitates, and their effects on the microstructural evolution are discussed, and the driving forces for these features are identified from the competition between the interface energy and elastic interactions due to the lattice misfit and misfit dislocations.« less

  20. Microstructural evolution of single Ni 2TiAl or hierarchical NiAl/Ni 2 TiAl precipitates in Fe-Ni-Al-Cr-Ti ferritic alloys during thermal treatment for elevated-temperature applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Song, Gian; Sun, Zhiqian; Poplawsky, Jonathan D.

    Precipitate features, such as the size, morphology, and distribution, are important parameters determining the mechanical properties of semi- or fully-coherent precipitatehardened alloys at elevated temperatures. In this study, the microstructural formation and evolution of recently-developed Fe-Ni-Al-Cr-Ti alloys with superior creep resistance have been systematically investigated using transmission-electron microscopy (TEM), scanning-electron microscopy (SEM), and atom-probe tomography (APT). These alloys were designed by adding 2 or 4 weight percent (wt. %) Ti into a NiAl-hardened ferritic alloy with a nominal composition of Fe-6.5Al-10Cr-10Ni-3.4Mo-0.25Zr-0.005B in wt. %. These alloys were, then, subjected to a homogenization treatment at 1,473 K for 0.5 hour, followedmore » by aging treatments at 973 K for 1 ~ 500 hours. In the homogenization-treated case, both alloys contain a primary L21-type Ni 2TiAl precipitate, but with the distinct size and morphology of the precipitates and precipitate/matrix interface structures. In the subsequent aging treatments, the 2 wt. % Ti alloy establishes a hierarchical-precipitate structure consisting of a fine network of a B2-type NiAl phase within the parent L2 1-type Ni2TiAl precipitate, while the 4 wt. % Ti alloy retains the single Ni 2TiAl precipitate. It was found that the hierarchical structure is more effective in remaining the coherent interface during the growth/coarsening of the precipitate. The formation of the different types of the precipitates, and their effects on the microstructural evolution are discussed, and the driving forces for these features are identified from the competition between the interface energy and elastic interactions due to the lattice misfit and misfit dislocations.« less

  1. Influence of Al grain boundaries segregations and La-doping on embrittlement of intermetallic NiAl

    NASA Astrophysics Data System (ADS)

    Kovalev, Anatoly I.; Wainstein, Dmitry L.; Rashkovskiy, Alexander Yu.

    2015-11-01

    The microscopic nature of intergranular fracture of NiAl was experimentally investigated by the set of electron spectroscopy techniques. The paper demonstrates that embrittlement of NiAl intermetallic compound is caused by ordering of atomic structure that leads to formation of structural aluminum segregations at grain boundaries (GB). Such segregations contain high number of brittle covalent interatomic bonds. The alloying by La increases the ductility of material avoiding Al GB enrichment and disordering GB atomic structure. The influence of La alloying on NiAl mechanical properties was investigated. GB chemical composition, atomic and electronic structure transformations after La doping were investigated by AES, XPS and EELFS techniques. To qualify the interatomic bonds metallicity the Fermi level (EF) position and electrons density (neff) in conduction band were determined in both undoped and doped NiAl. Basing on experimental results the physical model of GB brittleness formation was proposed.

  2. Molecular and phenotypic characterization of Als1 and Als2 mutations conferring tolerance to acetolactate synthase herbicides in soybean

    PubMed Central

    Walter, Kay L; Strachan, Stephen D; Ferry, Nancy M; Albert, Henrik H; Castle, Linda A; Sebastian, Scott A

    2014-01-01

    BACKGROUND Sulfonylurea (SU) herbicides are effective because they inhibit acetolactate synthase (ALS), a key enzyme in branched-chain amino acid synthesis required for plant growth. A soybean line known as W4-4 was developed through rounds of seed mutagenesis and was demonstrated to have a high degree of ALS-based resistance to both post-emergence and pre-emergence applications of a variety of SU herbicides. This report describes the molecular and phenotypic characterization of the Als1 and Als2 mutations that confer herbicide resistance to SUs and other ALS inhibitors. RESULTS The mutations are shown to occur in two different ALS genes that reside on different chromosomes: Als1 (P178S) on chromosome 4 and Als2 (W560L) on chromosome 6 (P197S and W574L in Arabidopsis thaliana). CONCLUSION Although the Als1 and Als2 genes are unlinked, the combination of these two mutations is synergistic for improved tolerance of soybeans to ALS-inhibiting herbicides. © 2014 DuPont Pioneer. Pest Management Science published by JohnWiley & Sons Ltd on behalf of Society of Chemical Industry. PMID:24425499

  3. Effect of in-situ formed Al3Ti particles on the microstructure and mechanical properties of 6061 Al alloy

    NASA Astrophysics Data System (ADS)

    Gupta, Rahul; Chaudhari, G. P.; Daniel, B. S. S.

    2018-03-01

    In this study, in situ Titanium-tri-aluminide (Al3Ti) particles reinforced Al 6061 alloy matrix composites were fabricated by the reaction of potassium hexafluorotitanate (K2TiF6) inorganic salt with molten Al 6061 alloy via liquid metallurgy route. The development of in-situ Al3Ti particles and their effects on the mechanical properties such as yield strength (YS), ductility, ultimate tensile strength (UTS) and hardness, and microstructure of Al 6061 alloy were studied. It was observed from the results that in-situ formed Al3Ti particles were blocky in morphology whose average size was around 2.6 ± 1.1 μm. Microstructure studies showed that grain size of Al matrix was reduced due to the nucleating effect of Al3Ti particles. It was observed from the mechanical properties analysis that when the volume fraction of Al3Ti particles was increased, the hardness, UTS and YS of the composites were also increased as compared to that of Al 6061 alloy. An improvement in ductility was observed with the dispersion of Al3Ti particles in base alloy which is contrary to many other composites.

  4. Ab-initio thermodynamic and elastic properties of AlNi and AlNi3 intermetallic compounds

    NASA Astrophysics Data System (ADS)

    Yalameha, Shahram; Vaez, Aminollah

    2018-04-01

    In this paper, thermodynamic and elastic properties of the AlNi and AlNi3 were investigated using density functional theory (DFT). The full-potential linearized augmented plane-wave (APW) in the framework of the generalized gradient approximation as used as implemented in the Wien2k package. The temperature dependence of thermal expansion coefficient, bulk modulus and heat capacity in a wide range of temperature (0-1600 K) were investigated. The calculated elastic properties of the compounds show that both intermetallic compounds of AlNi and AlNi3 have surprisingly negative Poisson’s ratio (NPR). The results were compared with other experimental and computational data.

  5. NQRS Data for AlDO2 [Al(OD)O] (Subst. No. 0032)

    NASA Astrophysics Data System (ADS)

    Chihara, H.; Nakamura, N.

    This document is part of Subvolume A `Substances Containing Ag … C10H15' of Volume 48 `Nuclear Quadrupole Resonance Spectroscopy Data' of Landolt-Börnstein - Group III `Condensed Matter'. It contains an extract of Section `3.2 Data tables' of the Chapter `3 Nuclear quadrupole resonance data' providing the NQRS data for AlDO2 [Al(OD)O] (Subst. No. 0032)

  6. Solidification processing of intermetallic Nb-Al alloys

    NASA Technical Reports Server (NTRS)

    Smith, Preston P.; Oliver, Ben F.; Noebe, Ronald D.

    1992-01-01

    Several Nb-Al alloys, including single-phase NbAl3 and the eutectic of Nb2Al and NbAl3, were prepared either by nonconsumable arc melting in Ar or by zone processing in He following initial induction melting and rod casting, and the effect of the solidification route on the microstructure and room-temperature mechanical properties of these alloys was investigated. Automated control procedures and melt conditions for directional solidification of NbAl3 and the Nb2Al/Nb3Al eutectic were developed; high purity and stoichiometry were obtained. The effects of ternary additions of Ti and Ni are described.

  7. Oxidation Resistant Ti-Al-Fe Diffusion Barrier for FeCrAlY Coatings on Titanium Aluminides

    NASA Technical Reports Server (NTRS)

    Brady, Michael P. (Inventor); Smialke, James L. (Inventor); Brindley, William J. (Inventor)

    1996-01-01

    A diffusion barrier to help protect titanium aluminide alloys, including the coated alloys of the TiAl gamma + Ti3Al (alpha2) class, from oxidative attack and interstitial embrittlement at temperatures up to at least 1000 C is disclosed. The coating may comprise FeCrAlX alloys. The diffusion barrier comprises titanium, aluminum, and iron in the following approximate atomic percent: Ti-(50-55)Al-(9-20)Fe. This alloy is also suitable as an oxidative or structural coating for such substrates.

  8. Transplacental passage of 26Al from pregnant rats to fetuses and 26Al transfer through maternal milk to suckling rats

    NASA Astrophysics Data System (ADS)

    Yumoto, S.; Nagai, H.; Matsuzaki, H.; Kobayashi, T.; Tada, W.; Ohki, Y.; Kakimi, S.; Kobayashi, K.

    2000-10-01

    Aluminium (Al) is toxic to the growth of fetuses and sucklings. However, the incorporation of Al into fetuses and sucklings in the periods of gestation and lactation has not been well clarified because Al lacks a suitable isotope for a tracer experiment. In this study, we used 26Al (a radioisotope of Al with half-life of 716,000 yr) as a tracer, and measured 26Al incorporation into fetuses and sucklings by accelerator mass spectrometry (AMS). To investigate Al incorporation into fetuses through transplacental passage, 26Al ( 26AlCl 3) was subcutaneously injected into pregnant rats on day 15 of gestation. 26Al was also subcutaneoulsy injected into lactating rats from day 1 to day 20 postpartum. By day 20 of gestation, 0.2% of the 26Al injected into a pregnant rat had been transferred to the fetuses, and 26Al was detected in the brain and liver of the fetuses. On day 9 postpartum, high levels of 26Al were demonstrated in the brain, liver, kidneys and blood of suckling rats. It is concluded that 26Al subcutaneously injected into pregnant rats and/or lactating rats is incorporated into their offspring through transplacental passage and/or maternal milk.

  9. Durability Assessment of TiAl Alloys

    NASA Technical Reports Server (NTRS)

    Draper, Susan L.; Lerch, Bradley A.

    2008-01-01

    The durability of TiAl is a prime concern for the implementation of TiAl into aerospace engines. Two durability issues, the effect of high temperature exposure on mechanical properties and impact resistance, have been investigated and the results are summarized in this paper. Exposure to elevated temperatures has been shown to be detrimental to the room temperature ductility of gamma alloys with the most likely mechanisms being the ingress of interstitials from the surface. Fluorine ion implantation has been shown to improve the oxidation resistance of gamma alloys, and ideally it could also improve the environmental embrittlement of high Nb content TiAl alloys. The effect of F ion implantation on the surface oxidation and embrittlement of a third generation, high Nb content TiAl alloy (Ti-45Al-5Nb-B-C) were investigated. Additionally, the ballistic impact resistance of a variety of gamma alloys, including Ti-48Al-2Cr- 2Nb, Ti-47Al-2Cr-2Nb, ABB-2, ABB-23, NCG359E, 95A and Ti-45Al-5Nb-B-C was accessed. Differences in the ballistic impact properties of the various alloys will be discussed, particularly with respect to their manufacturing process, microstructure, and tensile properties.

  10. Microarray analysis of peripheral blood lymphocytes from ALS patients and the SAFE detection of the KEGG ALS pathway

    PubMed Central

    2011-01-01

    Background Sporadic amyotrophic lateral sclerosis (sALS) is a motor neuron disease with poorly understood etiology. Results of gene expression profiling studies of whole blood from ALS patients have not been validated and are difficult to relate to ALS pathogenesis because gene expression profiles depend on the relative abundance of the different cell types present in whole blood. We conducted microarray analyses using Agilent Human Whole Genome 4 × 44k Arrays on a more homogeneous cell population, namely purified peripheral blood lymphocytes (PBLs), from ALS patients and healthy controls to identify molecular signatures possibly relevant to ALS pathogenesis. Methods Differentially expressed genes were determined by LIMMA (Linear Models for MicroArray) and SAM (Significance Analysis of Microarrays) analyses. The SAFE (Significance Analysis of Function and Expression) procedure was used to identify molecular pathway perturbations. Proteasome inhibition assays were conducted on cultured peripheral blood mononuclear cells (PBMCs) from ALS patients to confirm alteration of the Ubiquitin/Proteasome System (UPS). Results For the first time, using SAFE in a global gene ontology analysis (gene set size 5-100), we show significant perturbation of the KEGG (Kyoto Encyclopedia of Genes and Genomes) ALS pathway of motor neuron degeneration in PBLs from ALS patients. This was the only KEGG disease pathway significantly upregulated among 25, and contributing genes, including SOD1, represented 54% of the encoded proteins or protein complexes of the KEGG ALS pathway. Further SAFE analysis, including gene set sizes >100, showed that only neurodegenerative diseases (4 out of 34 disease pathways) including ALS were significantly upregulated. Changes in UBR2 expression correlated inversely with time since onset of disease and directly with ALSFRS-R, implying that UBR2 was increased early in the course of ALS. Cultured PBMCs from ALS patients accumulated more ubiquitinated proteins

  11. Comparative research on the influence of varied Al component on the active layer of AlGaN photocathode

    NASA Astrophysics Data System (ADS)

    He, Minyou; Chen, Liang; Su, Lingai; Yin, Lin; Qian, Yunsheng

    2017-06-01

    To theoretically research the influence of a varied Al component on the active layer of AlGaN photocathodes, the first principle based on density functional theory is used to calculate the formation energy and band structure of Al x Ga1-x N with x at 0, 0.125, 0.25, 0.325, and 0.5. The calculation results show that the formation energy declines along with the Al component rise, while the band gap is increasing with Al component increasing. Al x Ga1-x N with x at 0, 0.125, 0.25, 0.325, and 0.5 are direct band gap semiconductors, and their absorption coefficient curves have the same variation tendency. For further study, we designed two kinds of reflection-mode AlGaN photocathode samples. Sample 1 has an Al x Ga1-x N active layer with varied Al component ranging from 0.5 to 0 and decreasing from the bulk to the surface, while sample 2 has an Al x Ga1-x N active layer with the fixed Al component of 0.25. Using the multi-information measurement system, we measured the spectral response of the activated samples at room temperature. Their photocathode parameters were obtained by fitting quantum efficiency curves. Results show that sample 1 has a better spectral response than sample 2 at the range of short-wavelength. This work provides a reference for the structure design of the AlGaN photocathode. Project supported by the National Natural Science Foundation of China (Nos. 61308089, 6144005) and the Public Technology Applied Research Project of Zhejiang Province (No. 2013C31068).

  12. FTD and ALS: genetic ties that bind.

    PubMed

    Orr, Harry T

    2011-10-20

    Curiously, amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD), seemingly disparate neurodegenerative disorders, can be inherited together. Two groups (DeJesus-Hernandez et al. and Renton et al.) show that the long sought after ALS/FTD mutation on chromosomal region 9p is a hexanucleotide expansion in C90RF72. These studies, plus a study on X-linked ALS/FTD, provide molecular starting points for identifying pathways that link ALS and FTD pathogenesis. Copyright © 2011 Elsevier Inc. All rights reserved.

  13. Effect of Al gate on the electrical behaviour of Al-doped Ta2O5 stacks

    NASA Astrophysics Data System (ADS)

    Skeparovski, A.; Novkovski, N.; Atanassova, E.; Paskaleva, A.; Lazarov, V. K.

    2011-06-01

    The electrical behaviour of Al-doped Ta2O5 films on nitrided silicon and implemented in Al-gated MIS capacitors has been studied. The dopant was introduced into the Ta2O5 through its surface by deposing a thin Al layer on the top of Ta2O5 followed by an annealing process. The HRTEM images reveal that the initial double-layer structure of the stacks composed of doped Ta2O5 and interfacial SiON layer undergoes changes during the formation of the Al gate and transforms into a three-layer structure with an additional layer between the Al electrode and the doped Ta2O5. This layer, being a result of reaction between the Al gate and the Al-doped Ta2O5, affects the overall electrical properties of the stacks. Strong charge trapping/detrapping processes have been established in the vicinity of the doped Ta2O5/SiON interface resulting in a large C-V hysteresis effect. The charge trapping also influences the current conduction in the layers keeping the current density level rather low even at high electric fields (J < 10-6 A cm-2 at 7 MV cm-1). By employing a three-layer model of the stack, the permittivity of both, the Al-doped Ta2O5 and the additional layer, has been estimated and the corresponding conduction mechanisms identified.

  14. ALS-linked mutant SOD1 proteins promote Aβ aggregates in ALS through direct interaction with Aβ.

    PubMed

    Jang, Ja-Young; Cho, Hyungmin; Park, Hye-Yoon; Rhim, Hyangshuk; Kang, Seongman

    2017-11-04

    Amyotrophic lateral sclerosis (ALS) is a neurodegenerative disease characterized by progressive degeneration of motor neurons. Aggregation of ALS-linked mutant Cu/Zn superoxide dismutase (SOD1) is a hallmark of a subset of familial ALS (fALS). Recently, intracellular amyloid-β (Aβ) is detected in motor neurons of both sporadic and familial ALS. We have previously shown that intracellular Aβ specifically interacts with G93A, an ALS-linked SOD1 mutant. However, little is known about the pathological and biological effect of this interaction in neurons. In this study, we have demonstrated that the Aβ-binding region is exposed on the SOD1 surface through the conformational changes due to misfolding of SOD1. Interestingly, we found that the intracellular aggregation of Aβ is enhanced through the direct interaction of Aβ with the Aβ-binding region exposed to misfolded SOD1. Ultimately, increased Aβ aggregation by this interaction promotes neuronal cell death. Consistent with this result, Aβ aggregates was three-fold higher in the brains of G93A transgenic mice than those of non Tg. Our study provides the first direct evidence that Aβ, an AD-linked factor, is associated to the pathogenesis of ALS and provides molecular clues to understand common aggregation mechanisms in the pathogenesis of neurodegenerative diseases. Furthermore, it will provide new insights into the development of therapeutic approaches for ALS. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Report of the Working Group on Aerodynamics of Aircraft Afterbody.

    DTIC Science & Technology

    1986-06-01

    14 I 21 2.1.71 Addy A.L. Experimeftal-Theoretical Correlation of Supersonic Jet-on Base Pressure for Cylindrical Afterbodies. J. Aircraft, Vol. 7, No...An Improved Experimental-Theoretical Base Pressure Cor- Addy A.L. relation for Conical and Cylindrical Afterbodies with Agrell J. Centered Propulsive...2.1.92 Carri~re P. Effet d’une Injection de Fluide dans l’Eau-Morte sur les Conditions de Recollement d’un Ecoulement Plan Supersonique. Comptes

  16. Catalyseur d'hydrocraquage à base de sulfure de NiMo déposé sur une zéolithe HEMT modifiée

    NASA Astrophysics Data System (ADS)

    Baalala, M.; Becue, T.; Leglise, J.; Manoli, J. M.; van Gestel, J. N. M.; Lamotte, J.; Bensitel, M.; Goupil, J. M.; Cornet, D.

    1999-02-01

    Treating a NH4EMT zeolite with a solution of (NH4)2SiF6 at 80 °C affords a solid containing amorphous SiO2 intimately mixed with the zeolite. This acidic support EMT-Si was loaded with NiMo sulfide in order to prepare a bifunctional catalyst, which was tested for the hydrogenation of benzene and the hydrocracking of n-heptane. This NiMo/EMT-Si catalyst was found more active for hydrogenation than the analogous NiMo/HY. This is ascribed to a higher dispersion of the NiMo sulfide, which is almost equally shared between the internal mesopores in the modified EMT solid, and the fissures, which were created throughout the zeolite grains upon inserting the NiMo sulfide. The catalyst with the EMT-Si support was also found more active than the NiMo/HY for the hydrocracking of heptane, with a slightly higher selectivity into heptane isomers. Le traitement d'une zéolithe NH4EMT par une solution de (NH4)2SiF6 fournit un solide comportant une phase SiO2 amorphe intimement mélangée aux parties intactes de la zéolithe. Sur ce support acide EMT-Si, on a greffé un sulfure de NiMo afin de préparer un catalyseur bifonctionnel qui a été testé dans les réactions d'hydrogénation du benzène et d'hydrocraquage du n-heptane. Ce catalyseur NiMo/EMT-Si s'avère plus actif en hydrogénation que son analogue NiMo/HY, en raison d'une meilleure dispersion du sulfure de NiMo. Sur le solide EMT modifié, le sulfure se répartit à peu près également entre les mésopores internes et les fissures crées dans les grains de zéolithe lors de l'insertion du sulfure de NiMo. Au contraire sur le support Y, une partie du sulfure est externe aux grains de zéolithe et inactive en catalyse. Le catalyseur NiMo/EMT-Si est aussi trouvé plus actif que le NiMo/HY en hydrocraquage du n-heptane, et un peu plus sélectif en isomères.

  17. Metal concentrations in demersal fish species from Santa Maria Bay, Baja California Sur, Mexico (Pacific coast).

    PubMed

    Jonathan, M P; Aurioles-Gamboa, David; Villegas, Lorena Elizabeth Campos; Bohórquez-Herrera, Jimena; Hernández-Camacho, Claudia J; Sujitha, S B

    2015-10-15

    Concentrations of 11 trace metals (Fe, Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd, As, Hg) in 40 fish species from Santa Maria Bay, Baja California Sur, Mexico, the strategically important area for marine mammals and organisms were analyzed. Based on their concentrations the ranking of metals Fe>Zn>Ni>Cr>Mn>Pb>Cu>Co>As>Cd>Hg suggests that organism size, metabolism and feeding habits are correlated with metal concentrations. Local geological formations affect the concentrations of different metals in the aquatic environment and are subsequently transferred to fishes. The correlation analysis suggests that metabolism and nurturing habits impact the concentration of metals. Concentrations of Fe and Mn appear to be influenced by scavenging and absorption processes, which vary by species. The considerable variability in the metal concentrations obtained in different species underscores the importance of regular monitoring. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Grain refinement of 7075Al alloy microstructures by inoculation with Al-Ti-B master alloy

    NASA Astrophysics Data System (ADS)

    Hotea, V.; Juhasz, J.; Cadar, F.

    2017-05-01

    This paper aims to bring some clarification on grain refinement and modification of high strength alloys used in aerospace technique. In this work it was taken into account 7075 Al alloy, and the melt treatment was carried out by placing in the form of master alloy wire ternary AlTiB the casting trough at 730°C. The morphology of the resulting microstructures was characterized by optical microscopy. Micrographs unfinished and finished with pre-alloy containing ternary Al5Ti1B evidence fine crystals, crystal containing no columnar structure and highlights the size of the dendrites, and intermetallic phases occurring at grain boundaries in Al-Zn-Mg-Cu alloy. It has been found that these intermetallic compounds are MgZn2 type. AlTiB master alloys finishing ensures a fine eutectic structure, which determines the properties of hardware and improving the mechanical properties of aluminum alloys used in aeronautical engineering.

  19. ALS syndrome in patients with HIV-1 infection.

    PubMed

    Verma, Ashok; Berger, Joseph R

    2006-01-15

    A viral etiology of amyotrophic lateral sclerosis (ALS) has been proposed because of the selective vulnerability of motor neurons to certain viruses. During the last 20 years, at least 19 cases of ALS or ALS-like disease have been reported in HIV-1 (HIV) seropositive individuals. To describe two cases of clinically definite ALS in patients with HIV infection and to review the previously reported cases of HIV-associated ALS syndrome. A multidisciplinary ALS center and Neuro-AIDS clinic at a tertiary care university hospital. We investigated and prospectively monitored two patients who had developed clinically definite ALS by El Escorial criteria several years after acquiring the HIV infection. The previously reported cases of ALS or ALS-like disease in patients with HIV infection were reviewed for comparison and contrast with the characteristics of sporadic ALS. The clinical course of ALS in our two HIV seropositive individuals mirrored that of classical sporadic ALS. A review of previously described 19 patients with ALS syndrome revealed clinically definite ALS in 4 cases and clinically probable or possible ALS in 15. ALS commenced at different stages of the HIV disease; in 7 patients, HIV infection was discovered contemporaneously with diagnosis of ALS. CD4+ T cell count ranged from 2 to 560 cells/mm3. Three (1 definite ALS) of the fatal cases were studied at autopsy and all exhibited pathology outside the motor neuron pool. Unlike our patients, 7 of 8 patients with HIV-associated ALS syndrome receiving HAART demonstrated at least partial recovery of their motor deficit. ALS-like syndrome can occur in association with HIV infection; however, the causal relationship remains uncertain. Patients with ALS syndrome related to HIV infection are generally younger in age and often demonstrate pathology outside the motor neuron system. Patients with HIV-associated ALS syndrome may improve following antiretroviral therapy. An aggressive HAART regimen to reduce viral load

  20. A conduction model for contacts to Si-doped AlGaN grown on sapphire and single-crystalline AlN

    NASA Astrophysics Data System (ADS)

    Haidet, Brian B.; Bryan, Isaac; Reddy, Pramod; Bryan, Zachary; Collazo, Ramón; Sitar, Zlatko

    2015-06-01

    Ohmic contacts to AlGaN grown on sapphire substrates have been previously demonstrated for various compositions of AlGaN, but contacts to AlGaN grown on native AlN substrates are more difficult to obtain. In this paper, a model is developed that describes current flow through contacts to Si-doped AlGaN. This model treats the current through reverse-biased Schottky barriers as a consequence of two different tunneling-dependent conduction mechanisms in parallel, i.e., Fowler-Nordheim emission and defect-assisted Frenkel-Poole emission. At low bias, the defect-assisted tunneling dominates, but as the potential across the depletion region increases, tunneling begins to occur without the assistance of defects, and the Fowler-Nordheim emission becomes the dominant conduction mechanism. Transfer length method measurements and temperature-dependent current-voltage (I-V) measurements of Ti/Al-based contacts to Si-doped AlGaN grown on sapphire and AlN substrates support this model. Defect-assisted tunneling plays a much larger role in the contacts to AlGaN on sapphire, resulting in nearly linear I-V characteristics. In contrast, contacts to AlGaN on AlN show limited defect-assisted tunneling appear to be only semi-Ohmic.

  1. EFFECT OF Mg AND TEMPERATURE ON Fe-Al ALLOY LAYER IN Fe/(Zn-6%Al-x%Mg) SOLID-LIQUID DIFFUSION COUPLES

    NASA Astrophysics Data System (ADS)

    Liang, Liu; Liu, Ya-Ling; Liu, Ya; Peng, Hao-Ping; Wang, Jian-Hua; Su, Xu-Ping

    Fe/(Zn-6%Al-x%Mg) solid-liquid diffusion couples were kept at various temperatures for different periods of time to investigate the formation and growth of the Fe-Al alloy layer. Scanning electron microscopy (SEM), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD) were used to study the constituents and morphology of the Fe-Al alloy layer. It was found that the Fe2Al5Znx phase layer forms close to the iron sheet and the FeAl3Znx phase layer forms near the side of the melted Zn-6%Al-3%Mg in diffusion couples. When the Fe/(Zn-6%Al-3%Mg) diffusion couple is kept at 510∘C for more than 15min, a continuous Fe-Al alloy layer is formed on the interface of the diffusion couple. Among all Fe/(Zn-6%Al-x%Mg) solid-liquid diffusion couples, the Fe-Al alloy layer on the interface of the Fe/(Zn-6% Al-3% Mg) diffusion couple is the thinnest. The Fe-Al alloy layer forms only when the diffusion temperature is above 475∘. These results show that the Fe-Al alloy layer in Fe/(Zn-6%Al-x%Mg) solid-liquid diffusion couples is composed of Fe2Al5Znx and FeAl3Znx phase layers. Increasing the diffusing temperature and time period would promote the formation and growth of the Fe-Al alloy layer. When the Mg content in the Fe/(Zn-6%Al-x%Mg) diffusion couples is 3%, the growth of the Fe-Al alloy layer is inhibited. These results may explain why there is no obvious Fe-Al alloy layer formed on the interface of steel with a Zn-6%Al-3%Mg coating.

  2. 78 FR 6172 - In the Matter of the Designation of Ahmed Abdullah Saleh al-Khazmari al-Zahrani Also Known as Abu...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-29

    ... DEPARTMENT OF STATE [Public Notice 8168] In the Matter of the Designation of Ahmed Abdullah Saleh al- Khazmari al-Zahrani Also Known as Abu Maryam al-Saudi Also Known as Ahmed Abdullah S al-Zahrani... Abu Maryam al-Saudi; also known as Ahmed Abdullah S al-Zahrani, also known as Ahmad Abdullah Salih Al...

  3. Raman studies of nanocomposites catalysts: temperature and pressure effects of CeAl, CeMn and NiAl oxides

    NASA Astrophysics Data System (ADS)

    da Silva, Antonio N.; Neto, Antonio B. S.; Oliveira, Alcemira C.; Junior, Manoel C.; Junior, Jose A. L.; Freire, Paulo T. C.; Filho, Josué M.; Oliveira, Alcineia C.; Lang, Rossano

    2018-06-01

    High temperature and pressure effects on the physicochemical properties of binary oxides catalysts were investigated. The nanocomposites catalysts comprising of CeAl, CeMn and NiAl were characterized through various physicochemical techniques. A study of the temperature and pressure induced phenomena monitored by Raman spectroscopy was proposed and discussed. Spectral modifications of the Raman modes belonging to the CeMn suggest structural changes in the solid due to the MnO2 phase oxidation with increasing temperature. The thermal expansion and lattice anharmonicity effects were observed on CeMn due to lack of stability of the lattice vacancies. The CeAl and NiAl composites presented crystallographic stability at low temperatures however, undertake a phase transformation of NiO/Al2O3 into NiAl2O4, mostly without any deformation in its structure with increasing the temperature. It was also inferred that the binary oxides are more stables in comparison with monoxides. Detailed pressure-dependent Raman measurements of the T2g phonon mode of CeMn and NiAl revealed that the pressure contributes to modify bonds length and reduces the particles sizes of the solids. On the contrary, high pressure on CeAl sample improved the stability with addition of Al2O3 in the CeO2 lattice. The results then suggest a good stability of CeAl and NiAl composite catalysts at high pressure and low temperature and show how to prospect of tuning the catalysis for surface reactions entirely through in situ spectroscopic investigations means.

  4. Phase Constituents and Microstructure of Ti3Al/Fe3Al + TiN/TiB2 Composite Coating on Titanium Alloy

    NASA Astrophysics Data System (ADS)

    Li, Jianing; Chen, Chuanzhong; Zhang, Cuifang

    Laser cladding of the Fe3Al + B4C/TiN + Al2O3 pre-placed powders on the Ti-6Al-4V alloy can form the Ti3Al/Fe3Al + TiN/TiB2 composite coating, which improved the wear resistance of the Ti-6Al-4V alloy surface. In this study, the Ti3Al/Fe3Al + TiN/TiB2 composite coating has been researched by means of X-ray diffraction and scanning electron microscope. It was found that during the laser cladding process, Al2O3 can react with TiB2, leading to the formations of Ti3Al and B. This principle can be used to improve the Fe3Al + B4C/TiN laser-cladded coating on the Ti-6Al-4V alloy. Furthermore, during the cladding process, C consumed the oxygen in Fe3Al + B4C /TiN + Al2O3 molten pool, which retarded the productions of the redundant metal oxides.

  5. The cyclic oxidation resistance at 1200 C of beta-NiAl, FeAl, and CoAl alloys with selected third element additions

    NASA Technical Reports Server (NTRS)

    Barrett, C. A.; Titran, R. H.

    1992-01-01

    The intermetallic compounds Beta-NiAl, FeAl, and CoAl were tested in cyclic oxidation with selected third element alloy additions. Tests in static air for 200 1-hr cycles at 1200 C indicated by specific weight change/time data and x-ray diffraction analysis that the 5 at percent alloy additions did not significantly improve the oxidation resistance over the alumina forming baseline alloys without the additions. Many of the alloy additions were actually deleterious. Ta and Nb were the only alloy additions that actually altered the nature of the oxide(s) formed and still maintained the oxidation resistance of the protective alumina scale.

  6. Candida albicans Agglutinin-Like Sequence (Als) Family Vignettes: A Review of Als Protein Structure and Function

    PubMed Central

    Hoyer, Lois L.; Cota, Ernesto

    2016-01-01

    Approximately two decades have passed since the description of the first gene in the Candida albicans ALS (agglutinin-like sequence) family. Since that time, much has been learned about the composition of the family and the function of its encoded cell-surface glycoproteins. Solution of the structure of the Als adhesive domain provides the opportunity to evaluate the molecular basis for protein function. This review article is formatted as a series of fundamental questions and explores the diversity of the Als proteins, as well as their role in ligand binding, aggregative effects, and attachment to abiotic surfaces. Interaction of Als proteins with each other, their functional equivalence, and the effects of protein abundance on phenotypic conclusions are also examined. Structural features of Als proteins that may facilitate invasive function are considered. Conclusions that are firmly supported by the literature are presented while highlighting areas that require additional investigation to reveal basic features of the Als proteins, their relatedness to each other, and their roles in C. albicans biology. PMID:27014205

  7. Preparation and Bond Properties of Thermal Barrier Coatings on Mg Alloy with Sprayed Al or Diffused Mg-Al Intermetallic Interlayer

    NASA Astrophysics Data System (ADS)

    Fan, Xizhi; Wang, Ying; Zou, Binglin; Gu, Lijian; Huang, Wenzhi; Cao, Xueqiang

    2014-02-01

    Sprayed Al or diffused Mg-Al layer was designed as interlayer between the thermal barrier coatings (TBCs) and Mg alloy substrate. The effects of the interlayer on the bond properties of the coats were investigated. Al layers were prepared by arc spraying and atmospheric plasma spraying (APS), respectively. Mg-Al diffused layer was obtained after the heat treatment of the sprayed sample (Mg alloy with APS Al coat) at 400 °C. The results show that sprayed Al interlayer does not improve the bond stability of TBCs. The failure of the TBCs on Mg alloy with Al interlayer occurs mainly due to the low strength of Al layer. Mg-Al diffused layer improves corrosion resistance of substrate and the bond interface. The TBCs on Mg alloy with Mg-Al diffused interlayer shows better bond stability than the sample of which the TBCs is directly sprayed on Mg alloy substrate by APS.

  8. Lattice crossover and phase transitions in NdAlO{sub 3}-GdAlO{sub 3} system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vasylechko, L., E-mail: crystal-lov@polynet.lviv.ua; Shmanko, H.; Ohon, N.

    2013-02-15

    Phase and structural behaviour in the (1-x)NdAlO{sub 3}-xGdAlO{sub 3} system in a whole concentration range has been studied by means of in situ high-resolution X-ray synchrotron powder diffraction technique and differential thermal analysis. Two kinds of solid solutions Nd{sub 1-x}Gd{sub x}AlO{sub 3} have been found at room temperature: one with rhombohedral (x<0.15) and one with orthorhombic (x{>=}0.20) symmetry. A morphotropic phase transition occurs at x Almost-Equal-To 0.15, where the co-existence of both phases was observed. Peculiarity of the orthorhombic solid solution is the lattice parameter crossover at the compositions with x=0.33, 0.49 and 0.62. First-order structural transition Pbnm{r_reversible}R3{sup Macron }cmore » has been detected both from in situ powder diffraction and thermal analysis data. Continuous phase transformation R3{sup Macron }c{r_reversible}Pm3{sup Macron }m above 2140 K has been predicted for Nd-rich sample Nd{sub 0.85}Gd{sub 0.15}AlO{sub 3} from the extrapolation of high-temperature behaviour of the lattice parameter ratio of the rhombohedral phase. Based on the experimental data, the phase diagram of the pseudo-binary system NdAlO{sub 3}-GdAlO{sub 3} has been constructed. - Graphical abstract: Concentration dependencies of normalized lattice parameters of Nd{sub 1-x}Gd{sub x}AlO{sub 3} perovskite solid solutions. Highlights: Black-Right-Pointing-Pointer Two kinds of solid solutions Nd{sub 1-x}Gd{sub x}AlO{sub 3} were found in the NdAlO{sub 3}-GdAlO{sub 3} system. Black-Right-Pointing-Pointer Morphotropic transition between both perovskite phases occurs at x Almost-Equal-To 0.15. Black-Right-Pointing-Pointer Lattice parameter crossover was found in orthorhombic solid solution. Black-Right-Pointing-Pointer Temperature driven first-order phase transition Pbnm{r_reversible}R3{sup Macron }c was found in Nd{sub 1-x}Gd{sub x}AlO{sub 3}. Black-Right-Pointing-Pointer Phase diagram of the pseudo-binary system NdAlO{sub 3}-GdAlO{sub 3

  9. Emission mechanisms in Al-rich AlGaN/AlN quantum wells assessed by excitation power dependent photoluminescence spectroscopy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Iwata, Yoshiya; Banal, Ryan G.; Ichikawa, Shuhei

    2015-02-21

    The optical properties of Al-rich AlGaN/AlN quantum wells are assessed by excitation-power-dependent time-integrated (TI) and time-resolved (TR) photoluminescence (PL) measurements. Two excitation sources, an optical parametric oscillator and the 4th harmonics of a Ti:sapphire laser, realize a wide range of excited carrier densities between 10{sup 12} and 10{sup 21 }cm{sup −3}. The emission mechanisms change from an exciton to an electron-hole plasma as the excitation power increases. Accordingly, the PL decay time is drastically reduced, and the integrated PL intensities increase in the following order: linearly, super-linearly, linearly again, and sub-linearly. The observed results are well accounted for by rate equationsmore » that consider the saturation effect of non-radiative recombination processes. Using both TIPL and TRPL measurements allows the density of non-radiative recombination centers, the internal quantum efficiency, and the radiative recombination coefficient to be reliably extracted.« less

  10. Reconnaissance geologic map of the Loreto and part of the San Janier quadrangles, Baja California Sur, Mexico

    USGS Publications Warehouse

    McLean, Hugh

    1988-01-01

    The Loreto area of Baja California Sur, Mexico, contains a diverse association of igneous, sedimentary, and metasedimentary rocks exposed in the foothills and arroyos between the Sierra La Giganta and Gulf of California. The Loreto area was selected for this study to examine the possible relation of the marine rocks to the opening of the Gulf of California, and to determine the stratigraphic and structural relations between basement rocks composed of granitic and prebatholithic rocks and overlying Tertiary (mainly Miocene) sedimentary and volcanic rocks, and by a sequence of Pliocene marine and nonmarine sedimentary rocks. The Pliocene marine rocks lie in a structural depression informally called here, the Loreto embayment. This geologic map and report stem from a cooperative agreement between the U.S. Geological Survey and the Consejo de Recursos Minerales of Mexico that was initiated in 1982.

  11. Growth of crack-free GaN films on Si(111) substrate by using Al-rich AlN buffer layer

    NASA Astrophysics Data System (ADS)

    Lu, Yuan; Cong, Guangwei; Liu, Xianglin; Lu, Da-Cheng; Zhu, Qinsheng; Wang, Xiaohui; Wu, Jiejun; Wang, Zhanguo

    2004-11-01

    GaN epilayers were grown on Si(111) substrate by metalorganic chemical vapor deposition. By using the Al-rich AlN buffer which contains Al beyond stoichiometry, crack-free GaN epilayers with 1 μm thickness were obtained. Through x-ray diffraction (XRD) and secondary ion mass spectroscopy analyses, it was found that a lot of Al atoms have diffused into the under part of the GaN epilayer from the Al-rich AlN buffer, which results in the formation of an AlxGa1-xN layer at least with 300 nm thickness in the 1 μm thick GaN epilayer. The Al fraction x was estimated by XRD to be about 2.5%. X-ray photoelectron spectroscopy depth analysis was also applied to investigate the stoichiometry in the Al-rich buffer before GaN growth. It is suggested that the underlayer AlxGa1-xN originated from Al diffusion probably provides a compressive stress to the upper part of the GaN epilayer, which counterbalances a part of tensile stress in the GaN epilayer during cooling down and consequently reduces the cracks of the film effectively. The method using the Al diffusion effect to form a thick AlGaN layer is really feasible to achieve the crack-free GaN films and obtain a high crystal quality simultaneously.

  12. Unusual Oxidative Limitations for Al-MAX Phases

    NASA Technical Reports Server (NTRS)

    Smialek, James L.

    2017-01-01

    Alumina-forming MAX phases are well-known for their excellent oxidation resistance, rivaling many metallic NiAl, NiCrAl, and FeCrAl counterparts and with upper temperature capability possible to approximately1400C. However a number of limitations have been emerging that need to be acknowledged to permit robust performance in demanding applications. Ti2AlC and Ti3AlC2 possess excellent scale adhesion, cyclic oxidation/moisture/volatility resistance, and TBC compatibility. However they are very sensitive to Al content and flux in order to maintain an exclusive Al2O3 scale without runaway oxidation of ubiquitous TiO2 transient scales. Accelerated oxidation has been shown to occur for Al-depleted, damaged, or roughened surfaces at temperatures less than 1200C. Conversely, Cr2AlC is less sensitive to transients, but exhibits volatile losses at 1200C or above if common Cr7C3 impurity phases are present. Poor scale adhesion is exhibited after oxidation at 1150C or above, where spallation occurs at the Cr7C3 (depletion zone) interface. Delayed spallation is significant and suggests a moisture-induced phenomenon similar to non-adherent metallic systems. Re-oxidation of this surface does not reproduce the initial pure Al2O3 behavior, but initiates a less-protective scale. Cr2AlC has also been shown to have good long term bonding with superalloys at 800C, but exhibits significant Beta-NiAl + Cr7C3 diffusion zones at 1100C and above. This may set limits on Cr2AlC as a high temperature TBC bond coat on Ni-based superalloys, while improving corrosion resistance in lower temperature applications.

  13. An AlN/Al{sub 0.85}Ga{sub 0.15}N high electron mobility transistor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baca, Albert G.; Armstrong, Andrew M.; Allerman, Andrew A.

    2016-07-18

    An AlN barrier high electron mobility transistor (HEMT) based on the AlN/Al{sub 0.85}Ga{sub 0.15}N heterostructure was grown, fabricated, and electrically characterized, thereby extending the range of Al composition and bandgap for AlGaN channel HEMTs. An etch and regrowth procedure was implemented for source and drain contact formation. A breakdown voltage of 810 V was achieved without a gate insulator or field plate. Excellent gate leakage characteristics enabled a high I{sub on}/I{sub off} current ratio greater than 10{sup 7} and an excellent subthreshold slope of 75 mV/decade. A large Schottky barrier height of 1.74 eV contributed to these results. The room temperature voltage-dependent 3-terminalmore » off-state drain current was adequately modeled with Frenkel-Poole emission.« less

  14. The Effectiveness of Al-Si Coatings for Preventing Interfacial Reaction in Al-Mg Dissimilar Metal Welding

    NASA Astrophysics Data System (ADS)

    Wang, Yin; Al-Zubaidy, Basem; Prangnell, Philip B.

    2018-01-01

    The dissimilar welding of aluminum to magnesium is challenging because of the rapid formation of brittle intermetallic compounds (IMC) at the weld interface. An Al-Si coating interlayer was selected to address this problem, based on thermodynamic calculations which predicted that silicon would change the reaction path to avoid formation of the normally observed binary Al-Mg IMC phases ( β-Al3Mg2 and γ-Al12Mg17). Long-term static heat treatments confirmed that a Si-rich coating will preferentially produce the Mg2Si phase in competition with the less stable, β-Al3Mg2 and γ-Al12Mg17 binary IMC phases, and this reduced the overall reaction layer thickness. However, when an Al-Si clad sheet was tested in a real welding scenario, using the Refill™ friction stir spot welding (FSSW) technique, Mg2Si was only produced in very small amounts owing to the much shorter reaction time. Surprisingly, the coating still led to a significant reduction in the IMC reaction layer thickness and the welds exhibited enhanced mechanical performance, with improved strength and fracture energy. This beneficial behavior has been attributed to the softer coating material both reducing the welding temperature and giving rise to the incorporation of Si particles into the reaction layer, which toughened the brittle interfacial IMC phases during crack propagation.

  15. Epidemiological Trends of Cutaneous Leishmaniasis in Al-Madinah Al-Munawarah Province, Western Region of Saudi Arabia.

    PubMed

    Elmekki, Miskelyemen Abdelatti; Elhassan, Mogahid M; Ozbak, Hani A; Qattan, Ilham T; Saleh, Satti M; Alharbi, Ali H

    2017-01-01

    To investigate the epidemiological trends of cutaneous leishmaniasis (CL) in Al-Madinah Al-Munawarah, western region of KSA. Four hundred and sixty-seven parasitologically confirmed CL cases attending Al-Meeqat Hospital, Al-Madinah, during 2012-2015, were included in this study. Both Saudi and non-Saudi nationals were infected, with the highest infection rate being among Saudis (68.7%). Males were more affected than females as 86.9% of the total CL cases were males. Moreover, CL was prevalent in all age groups with higher frequency among young adults and adolescents (23.1% and 22.7%, respectively). Interestingly, almost all the patients in the adolescent and child age groups were Saudis (96.2% and 93.5%, respectively). Considering geographical distribution, the highest percentage of the cases (40.5%) were from the northern parts of Al-Madinah province while the eastern parts reported the least infection rate (7.3%). Few cases (2.5%) were supposed to encounter the infection abroad. Additionally, the frequency of infection was found to follow a seasonal distribution. Regarding treatment, pentostam, ketoconazole, or cryotherapy were the treatment options usually used. CL is prevalent in Al-Madinah Al-Munawarah area and new foci are being introduced. Thus, detailed studies with large surveillances regarding vector and reservoir hosts in and around the area are needed.

  16. Epidemiological Trends of Cutaneous Leishmaniasis in Al-Madinah Al-Munawarah Province, Western Region of Saudi Arabia

    PubMed Central

    Elmekki, Miskelyemen Abdelatti; Elhassan, Mogahid M; Ozbak, Hani A; Qattan, Ilham T; Saleh, Satti M; Alharbi, Ali H

    2017-01-01

    Objective: To investigate the epidemiological trends of cutaneous leishmaniasis (CL) in Al-Madinah Al-Munawarah, western region of KSA. Materials and Methods: Four hundred and sixty-seven parasitologically confirmed CL cases attending Al-Meeqat Hospital, Al-Madinah, during 2012–2015, were included in this study. Results: Both Saudi and non-Saudi nationals were infected, with the highest infection rate being among Saudis (68.7%). Males were more affected than females as 86.9% of the total CL cases were males. Moreover, CL was prevalent in all age groups with higher frequency among young adults and adolescents (23.1% and 22.7%, respectively). Interestingly, almost all the patients in the adolescent and child age groups were Saudis (96.2% and 93.5%, respectively). Considering geographical distribution, the highest percentage of the cases (40.5%) were from the northern parts of Al-Madinah province while the eastern parts reported the least infection rate (7.3%). Few cases (2.5%) were supposed to encounter the infection abroad. Additionally, the frequency of infection was found to follow a seasonal distribution. Regarding treatment, pentostam, ketoconazole, or cryotherapy were the treatment options usually used. Conclusion: CL is prevalent in Al-Madinah Al-Munawarah area and new foci are being introduced. Thus, detailed studies with large surveillances regarding vector and reservoir hosts in and around the area are needed. PMID:29302149

  17. Near ultraviolet InGaN/AlGaN-based light-emitting diodes with highly reflective tin-doped indium oxide/Al-based reflectors.

    PubMed

    Choi, Chang-Hoon; Han, Jaecheon; Park, Jae-Seong; Seong, Tae-Yeon

    2013-11-04

    The enhanced light output power of a InGaN/AlGaN-based light-emitting diodes (LEDs) using three different types of highly reflective Sn-doped indium oxide (ITO)/Al-based p-type reflectors, namely, ITO/Al, Cu-doped indium oxide (CIO)/s-ITO(sputtered)/Al, and Ag nano-dots(n-Ag)/CIO/s-ITO/Al, is presented. The ITO/Al-based reflectors exhibit lower reflectance (76 - 84% at 365 nm) than Al only reflector (91.1%). However, unlike Al only n-type contact, the ITO/Al-based contacts to p-GaN show good ohmic characteristics. Near-UV (365 nm) InGaN/AlGaN-based LEDs with ITO/Al, CIO/s-ITO/Al, and n-Ag/CIO/s-ITO/Al reflectors exhibit forward-bias voltages of 3.55, 3.48, and 3.34 V at 20 mA, respectively. The LEDs with the ITO/Al and CIO/s-ITO/Al reflectors exhibit 9.5% and 13.5% higher light output power (at 20 mA), respectively, than the LEDs with the n-Ag/CIO/s-ITO/Al reflector. The improved performance of near UV LEDs is attributed to the high reflectance and low contact resistivity of the ITO/Al-based reflectors, which are better than those of conventional Al-based reflectors.

  18. Using the Lewis Acid Me3 Si-F-Al(ORF )3 To Prepare Phosphino-Phosphonium Cations with the Least-Coordinating Anion [(RF O)3 Al-F-Al(ORF )3 ].

    PubMed

    Possart, Josephine; Martens, Arthur; Schleep, Mario; Ripp, Alexander; Scherer, Harald; Kratzert, Daniel; Krossing, Ingo

    2017-09-07

    By reaction of two equivalents of Me 3 Si-F-Al(OR F ) 3 1 with an equimolar amount of PPh 2 Cl, the salt [Ph 2 P-PPh 2 Cl] + [(R F O) 3 Al-F-Al(OR F ) 3 ] - 2 is prepared smoothly in 91 % yield (NMR, XRD). The synthesis of [Ph 2 P-PPh 3 ] + [(R F O) 3 Al-F-Al(OR F ) 3 ] - 3 is best achieved by a two-step reaction: first, two equivalents of 1 react with one PPh 3 to give [Me 3 Si-PPh 3 ] + [(R F O) 3 Al-F-Al(OR F ) 3 ] - 4 (NMR, XRD), which, upon reaction with PPh 2 Cl, yields pure 3 and Me 3 SiCl (NMR, XRD). Typically, a stoichiometry of two equivalents of 1 with respect to one equivalent of the chloride donor should be used. Otherwise, the residual strong Lewis acidity of the [(R F O) 3 Al-F-Al(OR F ) 3 ] - anion in the presence of the [F-Al(OR F ) 3 ] - anion-that forms with less than two equivalents of 1-leads to further chloride exchange reactions that complicate work-up. This route presents the easiest way to introduce the least-coordinating [(R F O) 3 Al-F-Al(OR F ) 3 ] - anion into a system. We expect a wide use of this route in all areas, in which chloride-bond heterolysis in combination with very weakly coordinating anions is desirable. Additionally, we performed calculations on the bond dissociation mechanisms of [R 2 P-PMe 3 ] + and the isoelectronic Me 2 P-SiMe 3 and Me 2 Si-PMe 3 in dependence of the solvent permittivity. These calculations show, especially for the neutral reference compounds, a heavy influence of the solvent on the dissociation mechanism, which is why we suggest investigating these properties in solution instead of gas phase. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Surgery for Gynecomastia in the Islamic Golden Age: Al-Tasrif of Al-Zahrawi (936–1013 AD)

    PubMed Central

    Chavoushi, Seyed Hadi; Ghabili, Kamyar; Kazemi, Abdolhassan; Aslanabadi, Arash; Babapour, Sarah; Ahmedli, Rafail; Golzari, Samad E. J.

    2012-01-01

    The rise of European science during the Renaissance is greatly indebted to the flourishing of the sciences during the Islamic Golden Age. However, some believe that medieval Islamic physicians and in particular surgeons had been merely a medium for Greco-Roman ideas. Contrarily, in some medieval Islamic medical books, such as Al-Tasrif of Al-Zahrawi (936–1013), the surgical instructions represent a change in the usual techniques or are accompanied by a case history, implying that the procedure was actually undertaken. Along with the hundreds of chapters on different diseases and related medical and surgical treatments, Al-Tasrif includes a chapter on surgical techniques for gynecomastia. The present paper is a review of the description of the surgical management of gynecomastia by Al-Zahrawi as well as that of the ancient Greek, medieval, and modern medicine. Although Al-Zahrawi seemed to base his descriptions of surgery for gynecomastia upon those of Paulus of Aegina, his modification of the procedure and application of the medicinal substances might be indicative of Al-Zahrawi's own practice of the procedure. Al-Zahrawi's surgical procedures remained unchanged for many centuries thenceforward until the technological evolution in the recent centuries. PMID:23050167

  20. Identification of phases in the interaction layer between U-Mo-Zr/Al and U-Mo-Zr/Al-Si

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Varela, C.L. Komar; Arico, S.F.; Mirandou, M.

    Out-of-pile diffusion experiments were performed between U-7wt.% Mo-1wt.% Zr and Al or Al A356 (7,1wt.% Si) at 550 deg. C. In this work morphological characterization and phase identification on both interaction layer are presented. They were carried out by the use of different techniques: optical and scanning electron microscopy, X-Ray diffraction and WDS microanalysis. In the interaction layer U-7wt.% Mo-1wt.% Zr/Al, the phases UAl{sub 3}, UAl{sub 4}, Al{sub 20}Mo{sub 2}U and Al{sub 43}Mo{sub 4}U{sub 6} were identified. In the interaction layer U-7wt.% Mo-1wt.% Zr/Al A356, the phases U(Al, Si) with 25at.% Si and Si{sub 5}U{sub 3} were identified. This lastmore » phase, with a higher Si concentration, was identified with XRD Synchrotron radiation performed at the National Synchrotron Light Laboratory (LNLS), Campinas, Brasil. (author)« less

  1. Cenomanian-Turonian biostratigraphy of the Jardas Al Abid area, Al Jabal Al Akhdar, northeast Libya

    NASA Astrophysics Data System (ADS)

    El Qot, Gamal M.; Abdulsamad, Esam O.

    2016-09-01

    The Upper Cenomanian-Turonian succession exposed at Jardas al'Abid area consists mainly of carbonates with siliciclastic intercalations. This succession is subdivided lithostratigraphically into: Qasr al'Abid (Late Cenomanian) and Al Baniyah (Late Cenomanian-Coniacian) formations. This sequence is relatively rich in macrofossil assemblages especially bivalves, gastropods, and echinoids with rare ammonites. Based on the first occurrence (FO) and last occurrence (LO) of some index species of these macrofossil groups, an integrated biostratigraphic framework has been constructed. The studied Cenomanian-Turonian sequence is subdivided biostratigraphically into three ammonite biozones; Pseudaspidoceras pseudonodosoides Total Range Zone, Choffaticeras segne Total Range Zone, and Coilopoceras requienianum Total Range Zone. Based on the rest of macrofossil assemblages other than the ammonites, eight biozones were recognized; Mecaster batnensis Total Range Zone, Ceratostreon flabellatum-Neithea dutrugei Acme Zone, Costagyra olisiponensis Acme Zone, Pycnodonte (Phygraea) vesicularis vesiculosa Acme Zone, Mytiloides labiatus Total Range Zone = Mecaster turonensis Acme Zone, Rachiosoma rectilineatum-Curvostrea rouvillei-Tylostoma (T.) globosum Assemblage Zone, Radiolites sp.-Apricardia? matheroni Total Range Zone, and Nerinea requieniana Total Range Zone. Most of the proposed biozones are recorded for the first time from Libya. The integration among these biozones as well as local and inter-regional correlation of the biozones have been discussed. The stage boundaries of the studied stratigraphic intervals are discussed, where the Cenomanian/Turonian boundary is delineated at the last occurrence (LO) of Pseudaspidoceras pseudonodosoides (Choffat), while the Turonian/Coniacian boundary is delineated arbitrary being agree with the LO of the Turonian fauna.

  2. Cyclic Oxidation of FeCrAlY/Al2O3 Composites

    NASA Technical Reports Server (NTRS)

    Nesbitt, James A.; Draper, Susan L.; Barrett, Charles A.

    1999-01-01

    Three-ply FeCrAlY/Al2O3 composites and FeCrAlY matrix-only samples were cyclically oxidized at 1000 C and 1100 C for up to 1000 1-hr cycles. Fiber ends were exposed at the ends of the composite samples. Following cyclic oxidation, cracks running parallel to and perpendicular to the fibers were observed on the large surface of the composite. In addition, there was evidence of increased scale damage and spallation around the exposed fiber ends, particularly around the middle ply fibers. This damage was more pronounced at the higher temperature. The exposed fiber ends showed cracking between fibers in the outer plies, occasionally with Fe and Cr-rich oxides growing out of the cracks. Large gaps developed at the fiber/matrix interface around many of the fibers, especially those in the outer plies. Oxygen penetrated many of these gaps resulting in significant oxide formation at the fiber/matrix interface far within the composite sample. Around several fibers, the matrix was also internally oxidized showing Al2O3 precipitates in a radial band around the fibers. The results show that these composites have poor cyclic oxidation resistance due to the CTE mismatch and inadequate fiber/matrix bond strength at temperatures of 1000 C and above.

  3. Application d'une technique de modelisation aerodynamique conceptuelle sur la simulation d'un pilote automatique a commande optimale pour un avion d'affaires

    NASA Astrophysics Data System (ADS)

    Pollender-Moreau, Olivier

    Ce document présente, dans le cadre d'un contexte conceptuel, une méthode d'enchaînement servant à faire le lien entre les différentes étapes qui permettent de réaliser la simulation d'un aéronef à partir de ses données géométriques et de ses propriétés massiques. En utilisant le cas de l'avion d'affaires Hawker 800XP de la compagnie Hawker Beechcraft, on démontre, via des données, un processus de traitement par lots et une plate-forme de simulation, comment (1) modéliser la géométrie d'un aéronef en plusieurs surfaces, (2) calculer les forces aérodynamiques selon une technique connue sous le nom de Vortex Lattice Method, (3) construire un modèle de vol servant à la simulation des aéronefs pour leur enveloppe de vol en ajoutant des fonctions supplémentaires, (4) construire un modèle de turbosoufflante simplifié, (5) développer un algorithme d'équilibre (trim) du mouvement longitudinal, (6) développer des algorithmes de contrôle à commande moderne, (7) développer certaines fonctions d'un système de pilotage automatique, et (8) rassembler le tout sous une même plate-forme de simulation. Afin de supporter ce travail, une application publique Matlab, connue sous le nom de Tornado, est utilisée conjointement avec d'autres fonctions pour la conception du modèle de vol aérodynamique. D'ailleurs, il sera démontré que le modèle de vol, quoiqu'il soit quand même crédible, ne concorde pas tout à fait avec les données de référence. Par contre, puisque le modèle des moteurs fonctionne bien, que l'algorithme d'équilibrage du mouvement longitudinal fonctionne bien et que les pôles des systèmes dynamiques concordent avec la littérature, les tests dynamiques effectués au sein de la plate-forme de simulation permettent d'obtenir des résultats fonctionnels et crédibles. D'ailleurs, deux systèmes d'augmentation de la stabilité basés sur la méthode de contrôle moderne LQR et couvrant l

  4. Computational materials design of negative effective U system in the hole-doped Delafossite of CuAlO2, AgAlO2 and AuAlO2

    NASA Astrophysics Data System (ADS)

    Nakanishi, Akitaka; Fukushima, Tetsuya; Uede, Hiroki; Katayama-Yoshida, Hiroshi

    2015-03-01

    In order to realize the super-high-TC superconductors (TC>1,000K) based on the general design rules for the negative Ueff system, we have performed computational materials design for theUeff<0 system in the hole-doped two-dimensional (2D) Delafossite CuAlO2, AgAlO2 and AuAlO2 from the first principles. We find the interesting chemical trend of TC in 2D and 3D systems; where the TC increases exponentially in the weak coupling regime (|Ueff (-0.44eV)|< W(2eV), W is the band width) for hole-doped CuFeS2, then the TC goes through a maximum when |Ueff (-4.88eV, -4.14eV)| ~ W (2.8eV, 3.5eV) for hole-doped AgAlO2 and AuAlO2, and the TC decreases with increasing |Ueff|in strong coupling regime, where |Ueff (-4.53eV)|> W(1.7eV) for hole-doped CuAlO2

  5. Step buffer layer of Al0.25Ga0.75N/Al0.08Ga0.92N on P-InAlN gate normally-off high electron mobility transistors

    NASA Astrophysics Data System (ADS)

    Shrestha, Niraj M.; Li, Yiming; Chang, E. Y.

    2016-07-01

    Normally-off AlGaN/GaN high electron mobility transistors (HEMTs) are indispensable devices for power electronics as they can greatly simplify circuit designs in a cost-effective way. In this work, the electrical characteristics of p-type InAlN gate normally-off AlGaN/GaN HEMTs with a step buffer layer of Al0.25Ga0.75N/Al0.1Ga0.9N is studied numerically. Our device simulation shows that a p-InAlN gate with a step buffer layer allows the transistor to possess normally-off behavior with high drain current and high breakdown voltage simultaneously. The gate modulation by the p-InAlN gate and the induced holes appearing beneath the gate at the GaN/Al0.25Ga0.75N interface is because a hole appearing in the p-InAlN layer can effectively vary the threshold voltage positively. The estimated threshold voltage of the normally-off HEMTs explored is 2.5 V at a drain bias of 25 V, which is 220% higher than the conventional p-AlGaN normally-off AlGaN/GaN gate injection transistor (GIT). Concurrently, the maximum current density of the explored HEMT at a drain bias of 10 V slightly decreases by about 7% (from 240 to 223 mA mm-1). At a drain bias of 15 V, the current density reached 263 mA mm-1. The explored structure is promising owing to tunable positive threshold voltage and the maintenance of similar current density; notably, its breakdown voltage significantly increases by 36% (from 800 V, GIT, to 1086 V). The engineering findings of this study indicate that novel p-InAlN for both the gate and the step buffer layer can feature a high threshold voltage, large current density and high operating voltage for advanced AlGaN/GaN HEMT devices.

  6. Defect characterization of MOCVD grown AlN/AlGaN films on sapphire substrates by TEM and TKD

    NASA Astrophysics Data System (ADS)

    O'Connell, J. H.; Lee, M. E.; Westraadt, J.; Engelbrecht, J. A. A.

    2018-04-01

    High resolution transmission electron microscopy (TEM) has been used to characterize defects structures in AlN/AlGaN epilayers grown by metal-organic chemical vapour deposition (MOCVD) on c-plane sapphire (Al2O3) substrates. The AlN buffer layer was shown to be epitaxially grown on the sapphire substrate with the two lattices rotated relatively through 30°. The AlN layer had a measured thickness of 20-30 nm and was also shown to contain nano-sized voids. The misfit dislocations in the buffer layer have been shown to be pure edge with a spacing of 1.5 nm. TEM characterization of the AlGaN epilayers was shown to contain a higher than expected threading dislocation density of the order 1010 cm-2 as well as the existence of "nanopipes". TEM analysis of the planar lamella for AlGaN has presented evidence for the possibility of columnar growth. The strain and misorientation mapping in the AlGaN epilayer by transmission Kikuchi diffraction (TKD) using the FIB lamella has also been demonstrated to be complimentary to data obtained by TEM imaging.

  7. Comments to Nordmo et al.'s article: effect of hardiness.

    PubMed

    Lucavei, Júlia; Pougnet, Laurence; Dewitte, Jean-Dominique; Loddé, Brice; Pougnet, Richard

    2017-01-01

    We would like to comment on Nordmo et al.'s article on hardiness among Norwegian Royal Navy seamen. The article is very interesting. Understanding the sleep disorders of the military can indeed make it possible to favour the preservation of their health and their competencies. The authors have highlighted the limitations of their study. They will take into account the sleep disorder factors already described in literature, such as: noise, comfort on board, shift organisations, etc. We would like to make two comments: on the one hand, highlight another limit to help future studies; on the other hand, open another perspective of prevention, not described in this article.

  8. Reaction diffusion in the NiCrAl and CoCrAl systems

    NASA Technical Reports Server (NTRS)

    Levine, S. R.

    1978-01-01

    The paper assesses the effect of overlay coating and substrate composition on the kinetics of coating depletion by interdiffusion. This is accomplished by examining the constitution, kinetics and activation energies for a series of diffusion couples primarily of the NiCrAl/Ni-10Cr or CoCrAl/Ni-10Cr type annealed at temperatures in the range 1000-1205 C for times up to 500 hr. A general procedure is developed for analyzing diffusion in multicomponent multiphase systems. It is shown that by introducing the concept of beta-source strength, which can be determined from appropriate phase diagrams, the Wagner solution for consumption of a second phase in a semiinfinite couple is successfully applied to the analysis of MCrAl couples. Thus, correlation of beta-recession rate constants with couple composition, total and diffusional activation energies, and interdiffusion coefficients are determined.

  9. ALS superbend magnet performance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Marks, Steve; Zbasnik, John; Byrne, Warren

    2001-12-10

    The Lawrence Berkeley National Laboratory has been engaged in the design, construction and testing of four superconducting dipoles (Superbends) that are installed in three arcs of the Advanced Light Source (ALS), with the fourth magnet as a spare. This represents a major upgrade to the ALS providing an enhanced flux and brightness at photon energies above 10 keV. In preparation for installation, an extensive set of tests and measurements have been conducted to characterize the magnetic and cryogenic performance of the Superbends and to fiducialize them for accurate placement in the ALS storage ring. The magnets are currently installed, andmore » the storage ring is undergoing final commissioning. This paper will present the results of magnetic and cryogenic testing.« less

  10. Investigation of partitionless growth of ɛ-Al60Sm11 phase in Al-10 at% Sm liquid

    NASA Astrophysics Data System (ADS)

    Sun, Yang; Ye, Zhuo; Zhang, Feng; Ding, Ze Jun; Wang, Cai-Zhuang; Kramer, Matthew J.; Ho, Kai-Ming

    2018-01-01

    Recent experiments on devitrification of Al90Sm10 amorphous alloys revealed an unusual polymorphic transformation to a complex cubic crystal structure called the ɛ-Al60Sm11 phase. Molecular dynamics simulations of the growth of the stoichiometric ɛ-phase seed in contact with an undercooled Al-10 at% Sm liquid are performed to elucidate the microscopic process of transformation. The as-grown crystal and undercooled liquid possess similar local order around Al atoms whereas a rigid network defined by the Sm sub-lattice develops during the growth. Using a template-cluster alignment method, we define an order parameter to characterize the structural evolution in the system. Estimates of the attachment rate is {R}{{a}}=8.70× {10}-4 Å-2 ns-1 and detachment rate is {R}{{d}}=3.83× {10}-4 Å-2 ns-1 at the interface between ɛ-Al60Sm11 and Al-10 at% Sm liquid at 800 K.

  11. Synthesis and characterization of CuAlO(2) and AgAlO(2) delafossite oxides through low-temperature hydrothermal methods.

    PubMed

    Xiong, Dehua; Zeng, Xianwei; Zhang, Wenjun; Wang, Huan; Zhao, Xiujian; Chen, Wei; Cheng, Yi-Bing

    2014-04-21

    In this work, we present one-step low temperature hydrothermal synthesis of submicrometer particulate CuAlO2 and AgAlO2 delafossite oxides, which are two important p-type transparent conducting oxides. The synthesis parameters that affect the crystal formation processes and the product morphologies, including the selection of starting materials and their molar ratios, the pH value of precursors, the hydrothermal temperature, pressure, and reaction time, have been studied. CuAlO2 crystals have been synthesized from the starting materials of CuCl and NaAlO2 at 320-400 °C, and from Cu2O and Al2O3 at 340-400 °C, respectively. AgAlO2 crystals have been successfully synthesized at the low temperature of 190 °C, using AgNO3 and Al(NO3)3 as the starting materials and NaOH as the mineralizer. The detailed elemental compositions, thermal stability, optical properties, and synthesis mechanisms of CuAlO2 and AgAlO2 also have been studied. Noteworthy is the fact that both CuAlO2 and AgAlO2 can be stabilized up to 800 °C, and their optical transparency can reach 60%-85% in the visible range. Besides, it is believed the crystal formation mechanisms uncovered in the synthesis of CuAlO2 and AgAlO2 will prove insightful guildlines for the preparation of other delafossite oxides.

  12. Als2 mRNA splicing variants detected in KO mice rescue severe motor dysfunction phenotype in Als2 knock-down zebrafish.

    PubMed

    Gros-Louis, Francois; Kriz, Jasna; Kabashi, Edor; McDearmid, Jonathan; Millecamps, Stéphanie; Urushitani, Makoto; Lin, Li; Dion, Patrick; Zhu, Qinzhang; Drapeau, Pierre; Julien, Jean-Pierre; Rouleau, Guy A

    2008-09-01

    Recessive ALS2 mutations are linked to three related but slightly different neurodegenerative disorders: amyotrophic lateral sclerosis, hereditary spastic paraplegia and primary lateral sclerosis. To investigate the function of the ALS2 encoded protein, we generated Als2 knock-out (KO) mice and zAls2 knock-down zebrafish. The Als2(-/-) mice lacking exon 2 and part of exon 3 developed mild signs of neurodegeneration compatible with axonal transport deficiency. In contrast, zAls2 knock-down zebrafish had severe developmental abnormalities, swimming deficits and motor neuron perturbation. We identified, by RT-PCR, northern and western blotting novel Als2 transcripts in mouse central nervous system. These Als2 transcripts were present in Als2 null mice as well as in wild-type littermates and some rescued the zebrafish phenotype. Thus, we speculate that the newly identified Als2 mRNA species prevent the Als2 KO mice from developing severe neurodegenerative disease and might also regulate the severity of the motor neurons phenotype observed in ALS2 patients.

  13. Epitaxial growth of GaN/AlN/InAlN heterostructures for HEMTs in horizontal MOCVD reactors with different designs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tsatsulnikov, A. F., E-mail: andrew@beam.ioffe.ru; Lundin, W. V.; Sakharov, A. V.

    2016-09-15

    The epitaxial growth of InAlN layers and GaN/AlN/InAlN heterostructures for HEMTs in growth systems with horizontal reactors of the sizes 1 × 2', 3 × 2', and 6 × 2' is investigated. Studies of the structural properties of the grown InAlN layers and electrophysical parameters of the GaN/AlN/InAlN heterostructures show that the optimal quality of epitaxial growth is attained upon a compromise between the growth conditions for InGaN and AlGaN. A comparison of the epitaxial growth in different reactors shows that optimal conditions are realized in small-scale reactors which make possible the suppression of parasitic reactions in the gas phase.more » In addition, the size of the reactor should be sufficient to provide highly homogeneous heterostructure parameters over area for the subsequent fabrication of devices. The optimal compositions and thicknesses of the InAlN layer for attaining the highest conductance in GaN/AlN/InAlN transistor heterostructures.« less

  14. Multiscale Experimental and Numerical Approach to the Powder Particle Shape Effect on Al-Al2O3 Coating Build-Up

    NASA Astrophysics Data System (ADS)

    Leger, P. E.; Sennour, M.; Delloro, F.; Borit, F.; Debray, A.; Gaslain, F.; Jeandin, M.; Ducos, M.

    2017-10-01

    Aluminum (Al) powders with spherical and irregular particle shapes were mixed with two alumina (Al2O3) powders with either a spherical or an angular particle shape to achieve high-performance cold-sprayed coatings onto steel. Two effects of the aluminum particle shape were observed. First, coating microstructure observation showed impinging heterogeneity depending on particle shape. Second, particle jet differences depending on particle morphology were shown by velocity maps. From the latter, SEM and XRD, three effects of the alumina particle shape were also shown, i.e., higher in-flight velocity of angular particles, fragmentation of spherical hollow particles and embedding of alumina particles with aluminum. Numerical simulation of particle impacts was developed to study the densification of Al coating due to Al2O3 addition through elucidation of Al-Al2O3 interaction behavior at the scale of the coating. Al/Al and Al/Al2O3 interfaces were investigated using TEM to understand coating strengthening effects due to alumina addition at the scale of the particle. As a whole, Al and Al2O3 particle shape effects were claimed to explain coating mechanical properties, e.g., microhardness and coating-substrate bond strength. This study resulted in specifying criteria to help cold spray users in selecting powders for their applications, to meet economic and technical requirements.

  15. Prolongement de théories planétaires à variations séculaires sur plusieurs milliers d'années.

    NASA Astrophysics Data System (ADS)

    Simon, J. L.

    Les théories planétaires à variations séculaires construites au Bureau des Longitudes, VSOP82 (Bretagnon, 1982) et TOP82 (Simon, 1983) ne contiennent pas de termes de degré supérieur à 6 dans le développement en puissance du temps des perturbations. Il en résulte que leur précision se dégrade avec le temps pour des intervalles de temps supérieurs à 1000 ans. L'auteur présente ici un travail effectué en collaboration avec P. Bretagnon qui a consisté à construire une solution du mouvement de Jupiter et Saturne gardant une bonne précision sur 6000 ans.

  16. Microscopic potential fluctuations in Si-doped AlGaN epitaxial layers with various AlN molar fractions and Si concentrations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurai, Satoshi, E-mail: kurai@yamaguchi-u.ac.jp; Yamada, Yoichi; Miyake, Hideto

    2016-01-14

    Nanoscopic potential fluctuations of Si-doped AlGaN epitaxial layers with the AlN molar fraction varying from 0.42 to 0.95 and Si-doped Al{sub 0.61}Ga{sub 0.39}N epitaxial layers with Si concentrations of 3.0–37 × 10{sup 17 }cm{sup −3} were investigated by cathodoluminescence (CL) imaging combined with scanning electron microscopy. The spot CL linewidths of AlGaN epitaxial layers broadened as the AlN molar fraction was increased to 0.7, and then narrowed at higher AlN molar fractions. The experimental linewidths were compared with the theoretical prediction from the alloy broadening model. The trends displayed by our spot CL linewidths were consistent with calculated results at AlN molar fractionsmore » of less than about 0.60, but the spot CL linewidths were markedly broader than the calculated linewidths at higher AlN molar fractions. The dependence of the difference between the spot CL linewidth and calculated line broadening on AlN molar fraction was found to be similar to the dependence of reported S values, indicating that the vacancy clusters acted as the origin of additional line broadening at high AlN molar fractions. The spot CL linewidths of Al{sub 0.61}Ga{sub 0.39}N epitaxial layers with the same Al concentration and different Si concentrations were nearly constant in the entire Si concentration range tested. From the comparison of reported S values, the increase of V{sub Al} did not contribute to the linewidth broadening, unlike the case of the V{sub Al} clusters.« less

  17. Analysis of NiAlTa precipitates in beta-NiAl + 2 at. pct Ta alloy

    NASA Technical Reports Server (NTRS)

    Pathare, V.; Michal, G. M.; Vedula, K.; Nathal, M. V.

    1987-01-01

    Results are reported from experiments performed to identify the precipitates, and their orientation in the matrix, in a beta-NiAl alloy containing 2 at. pct. Ta after undergoing creep test at 1300 K. Test specimens formed by extruding hot powders were compressed at 1300 K for about 50 hr at a strain rate averaging 6/1 million per sec. The specimens were then thinned and examined under an electron microscope and by X-ray diffractometry. An intermetallic NiAlTa compound with a hexagonal Cl4 structure appeared as second phase precipitates in the samples, exhibiting plate-like shapes and a habit plane close to (012). The prism planes of the hexagonal NiAlTa precipitates paralleled the closest packed planes in the cubic beta-NiAl matrix.

  18. Comparaison des Champs de Pression Instationnaires Calcules et Mesures sur le Modele ZKP (Comparison of Unstable Pressure Fields Calculated and Measured on the ZKP Model),

    DTIC Science & Technology

    1980-08-01

    bord de fuite. Le nombre de Mach Man’est donc d~fini qu’entre deux limites et seule I’expdrience peut nous permettre de ...Si ion consid~re lea valeurs de Ia portance at du moment quart avant pour ce cas on obtient le tableau suivant: CC rsn Module Phase Module Phase P.P.T...Comparaison des Champs de Pression Instationnaires Calcules et Mesures sur le Mod ele ZK P COMPARISON OF UNSTABLE PRESSURE FIELDS .- %P, CALCULATED

  19. Control of Defects in Aluminum Gallium Nitride ((Al)GaN) Films on Grown Aluminum Nitride (AlN) Substrates

    DTIC Science & Technology

    2013-02-01

    Nord, J.; Albe, K.; Erhart, P.; Nordlund, K. Modelling of Compound Semiconductors: Analytical Bond-order Potential for Gallium , Nitrogen and Gallium ...Control of Defects in Aluminum Gallium Nitride ((Al)GaN) Films on Grown Aluminum Nitride (AlN) Substrates by Iskander G. Batyrev, Chi-Chin Wu...Aluminum Gallium Nitride ((Al)GaN) Films on Grown Aluminum Nitride (AlN) Substrates Iskander G. Batyrev and N. Scott Weingarten Weapons and

  20. A high-temperature neutron diffraction study of Nb 2AlC and TiNbAlC

    DOE PAGES

    Bentzel, Grady W.; Lane, Nina J.; Vogel, Sven C.; ...

    2014-12-16

    In this paper, we report on the crystal structures of Nb 2AlC and TiNbAlC actual composition (Ti 0.45,Nb 0.55) 2AlC compounds determined from Rietveld analysis of neutron diffraction patterns in the 300-1173 K temperature range. The average linear thermal expansion coefficients of a Nb 2AlC sample in the a and c directions are, respectively, 7.9(5)x10 -6 K -1 and 7.7(5)x10 -6 K -1 on one neutron diffractometer and 7.3(3)x10 -6 K -1 and 7.0(2)x10 -6 K -1 on a second diffractometer. The respective values for the (Ti 0.45,Nb 0.55) 2AlC composition - only tested on one diffractometer - are 8.5(3)x10more » -6 K -1 and 7.5(5)x10 -6 K -1. These values are relatively low compared to other MAX phases. Like other MAX phases, however, the atomic displacement parameters show that the Al atoms vibrate with higher amplitudes than the Ti and C atoms, and 1 more along the basal planes than normal to them. In addition, when the predictions of the atomic displacement parameters obtained from density functional theory are compared to the experimental results, good quantitative agreement is found for the Al atoms. In case of the Nb and C atoms, the agreement was more qualitative.« less

  1. Cross-resistance to herbicides of five ALS-inhibiting groups and sequencing of the ALS gene in Cyperus difformis L.

    PubMed

    Merotto, Aldo; Jasieniuk, Marie; Osuna, Maria D; Vidotto, Francesco; Ferrero, Aldo; Fischer, Albert J

    2009-02-25

    Resistance to ALS-inhibiting herbicides in Cyperus difformis has evolved rapidly in many rice areas worldwide. This study identified the mechanism of resistance, assessed cross-resistance patterns to all five chemical groups of ALS-inhibiting herbicides in four C. difformis biotypes, and attempted to sequence the ALS gene. Whole-plant and ALS enzyme activity dose-response assays indicated that the WA biotype was resistant to all ALS-inhibiting herbicides evaluated. The IR biotype was resistant to bensulfuron-methyl, orthosulfamuron, imazethapyr, and propoxycarbazone-sodium and less resistant to bispyribac-sodium and halosulfuron-methyl, and susceptible to penoxsulam. ALS enzyme activity assays indicated that resistance is due to an altered target site yet mutations previously found to endow target-site resistance in weeds were not detected in the sequences obtained. The inability to detect resistance mutations in C. difformis may result from the presence of additional ALS genes, which were not amplified by the primers used. This study reports the first ALS gene sequence from Cyperus difformis. Certain ALS-inhibiting herbicides can still be used to control some resistant C. difformis biotypes. However, because cross-resistance to all five classes of ALS-inhibitors was detected in other resistant biotypes, these herbicides should only be used within an integrated weed management program designed to delay the evolution of herbicide resistance.

  2. Identifying the Distribution of Al 3+ in LiNi 0.8 Co 0.15 Al 0.05 O 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Trease, Nicole M.; Seymour, Ieuan D.; Radin, Maxwell D.

    2016-11-22

    The doping of Al into layered Li transition metal (TM) oxide cathode materials, LiTMO 2, is known to improve the structural and thermal stability, although the origin of the enhanced properties is not well understood. The effect of aluminum doping on layer stabilization has been investigated using a combination of techniques to measure the aluminum distribution in layered LiNi 0.8Co 0.15Al 0.05O 2 (NCA) over multiple length scales with 27Al and 7Li MAS NMR, local electrode atom probe (APT) tomography, X-ray and neutron diffraction, DFT, and SQUID magnetic susceptibility measurements. APT ion maps show a homogenous distribution of Ni, Co,more » Al and O 2 throughout the structure at the single particle level in agreement with the high-temperature phase diagram. 7Li and 27Al NMR indicates that the Ni 3+ ions undergo a dynamic Jahn-Teller (JT) distortion. 27Al NMR spectra indicate that the Al reduces the strain associated with the JT distortion, by preferential electronic ordering of the JT long bonds directed toward the Al 3+ ion. The ability to understand the complex atomic and orbital ordering around Al 3+ demonstrated in the current method will be useful for studying the local environment of Al 3+ in a range of transition metal oxide battery materials.« less

  3. Identifying the Distribution of Al 3+ in LiNi 0.8 Co 0.15 Al 0.05 O 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Trease, Nicole M.; Seymour, Ieuan D.; Radin, Maxwell D.

    2016-10-07

    The doping of Al into layered Li transition metal (TM) oxide cathode materials, LiTMO 2, is known to improve the structural and thermal stability, although the origin of the enhanced properties is not well understood. We have investigated the effect of aluminum doping on layer stabilization using a combination of techniques to measure the aluminum distribution in layered LiNi 0.8Co 0.15Al 0.05O 2 (NCA) over multiple length scales with 27Al and 7Li MAS NMR, local electron atom probe (LEAP) tomography, X-ray and neutron diffraction, DFT, and SQUID magnetic susceptibility measurements. LEAP tomographic maps show a homogenous distribution of Ni, Co,more » Al and O 2 throughout the structure at the particle level in agreement with the hightemperature phase diagram. 7Li and 27Al NMR indicates that the Ni 3+ ions undergo a dynamic Jahn-Teller (JT) distortion. 27Al NMR spectra indicate that the Al reduces the strain associated with the JT distortion, by preferential electronic ordering of the JT long bonds directed toward the Al 3+ ion. Our ability to understand the complex atomic and orbital ordering around Al 3+ demonstrated in the current method will be useful for studying the local environment of Al 3+ in a range of transition metal oxide battery materials.« less

  4. Impact of Uncertain Cues on Combat Identification Judgments

    DTIC Science & Technology

    2009-11-01

    d’essais dans lesquels une figure humaine est exposée soudainement à la vue du participant. Celui-ci ne doit tirer que sur les figures représentant un...SA and TTPs are employed [2]. Another view of CID focuses on the decision making steps required. Dean et al . [3] propose a four-stage model of CID...Neutricide is the term used by Dean et al . [3] to describe incidents when civilians and civilian infrastructure are accidentally targeted or misidentified and

  5. Fundamentals of Aerodynamic-Flow and Combustion Control by Plasmas

    DTIC Science & Technology

    2010-05-14

    d’un Générateur de Plasma Volumique avec Allumage sur le Banc Mercato” Report n°RT 1/11982/ONERA/ DMAE . [3] N.B. Anikin, E.N. Kukaev, S...based on the multichannel quantum defect theory (MQDT)[5], taking into account the ro-vibrational structure of the ion and of the neutral system. A...editor), "Molecular Applications of Quantum Defect Theory", IOP (1996) 6. S. Morisset et al, Phys. Rev. A 76, 042702 (2007) 7. A. Wolf et al

  6. Syndrome de larva migrans cutanée sur pied malformé (à propos d'un cas)

    PubMed Central

    Benbella, Imane; Khalki, Hanane; Lahmadi, Khalid; Kouara, Sara; Abbadi, Abderrahim; Er-rami, Mohammed

    2016-01-01

    Le syndrome de larva migrans cutanée est une dermite sous cutanée causée par des larves d'ankylostomes d'animaux en impasse parasitaire chez l'homme. L'infestation transcutanée est favorisée par le contact avec le sol contaminé par les larves du parasite. Nous rapportons le cas d'un nourrisson de 15 mois, originaire de Guinée-Bissau, atteint d'un syndrome de larva migrans cutanée sur un pied malformé. Cette malformation sous forme d'une syndactylie associée à une tuméfaction du pied, était à l'origine d'un retard d'acquisition de la station debout. De même, on a rapporté une notion de pieds nus, vue la difficulté de chausser le pied malformé du patient. Tous ces facteurs auraient contribués à favoriser l'infestation du malade par les larves du nématode. PMID:27217876

  7. 77 FR 4082 - Review and Amendment of the Designation of al-Qa'ida in Iraq, et al. as a Foreign Terrorist...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-26

    ... Operations in Iraq, aka al-Qaida of Jihad in Iraq, aka al-Qaida in Iraq, aka al-Qaida in Mesopotamia, aka al... of al-Jihad's Base in the Land of the Two Rivers, aka The Organization Base of Jihad/Mesopotamia, aka...

  8. 75 FR 2920 - In the Matter of the Designation of al-Qa'ida in the Arabian Peninsula (AQAP), Also Known as al...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-19

    ... Known as Tanzim Qa'idat al-Jihad fi Jazirat al- Arab, Also Known as al-Qa'ida Organization in the... Tanzim Qa'idat al- Jihad fi Jazirat al-Arab, also known as al-Qa'ida Organization in the Arabian...

  9. Growth of C60 thin films on Al2O3/NiAl(100) at early stages

    NASA Astrophysics Data System (ADS)

    Hsu, S.-C.; Liao, C.-H.; Hung, T.-C.; Wu, Y.-C.; Lai, Y.-L.; Hsu, Y.-J.; Luo, M.-F.

    2018-03-01

    The growth of thin films of C60 on Al2O3/NiAl(100) at the earliest stage was studied with scanning tunneling microscopy and synchrotron-based photoelectron spectroscopy under ultrahigh-vacuum conditions. C60 molecules, deposited from the vapor onto an ordered thin film of Al2O3/NiAl(100) at 300 K, nucleated into nanoscale rectangular islands, with their longer sides parallel to direction either [010] or [001] of NiAl. The particular island shape resulted because C60 diffused rapidly, and adsorbed and nucleated preferentially on the protrusion stripes of the crystalline Al2O3 surface. The monolayer C60 film exhibited linear protrusions of height 1-3 Å, due to either the structure of the underlying Al2O3 or the lattice mismatch at the boundaries of the coalescing C60 islands; such protrusions governed also the growth of the second layer. The second layer of the C60 film grew only for a C60 coverage >0.60 ML, implying a layer-by-layer growth mode, and also ripened in rectangular shapes. The thin film of C60 was thermally stable up to 400 K; above 500 K, the C60 islands dissociated and most C60 desorbed.

  10. Shock induced reaction of Ni/Al nanopowder mixture.

    PubMed

    Meng, C M; Wei, J J; Chen, Q Y

    2012-11-01

    Nanopowder Ni/Al mixture (mixed in Al:Ni = 2:1 stoichiometry) was shock compressed by employing single and two-stage light gas gun. The particle size of Al and Ni are 100-200 nm and 50-70 nm respectively, morphologies of Al and Ni are sphere like either. Recovered product was characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD) analysis. According to the XRD spectrum, the mixed powder undergo complete reaction under shock compression, reaction product consist of Ni2Al3, NiAl and corundum structure Al2O3 compound. Grain size of Ni-Al compound is less than 100 nm. With the shock pressure increasing, the ratio of Ni2Al3 decreased obviously. The corundum crystal size is 400-500 nm according to the SEM observation. The results of shock recovery experiments and analysis show that the threshold pressure for reaction of nano size powder Ni/Al mixture is much less than that of micro size powder.

  11. MCrAlY bond coat with enhanced yttrium

    DOEpatents

    Jablonski, Paul D.; Hawk, Jeffrey A.

    2016-08-30

    One or more embodiments relates to a method of producing an MCrAlY bond coat comprising an MCrAlY layer in contact with a Y--Al.sub.2O.sub.3 layer. The MCrAlY layer is comprised of a .gamma.-M solid solution, a .beta.-MAl intermetallic phase, and Y-type intermetallics. The Y--Al.sub.2O.sub.3 layer is comprised of Yttrium atoms coordinated with oxygen atoms comprising the Al.sub.2O.sub.3 lattice. The method comprises depositing an MCrAlY material on a substrate, applying an Y.sub.2O.sub.3 paste, and heating the substrate in a non-oxidizing atmosphere at a temperature between 400-1300.degree. C. for a time sufficient to generate the Y--Al.sub.2O.sub.3 layer. Both the MCrAlY layer and the Y--Al.sub.2O.sub.3 layer have a substantial absence of Y.sub.2O.sub.3, YAG, and YAP phases.

  12. 77 FR 4083 - Amendment of the Designation of al-Qa'ida in Iraq, et al. as a Specially Designated Global...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-26

    ... Iraq, aka al-Qaida in Iraq, aka al-Qaida in Mesopotamia, aka al-Qaida in the Land of the Two Rivers... the Two Rivers, aka The Organization Base of Jihad/Mesopotamia, aka The Organization of al-Jihad's...

  13. Al3+ environments in nanostructured ZnAl2O4 and their effects on the luminescence properties.

    PubMed

    da Silva, Alison A; Gonçalves, Agnaldo S; Davolos, Marian R; Santagneli, Silvia H

    2008-11-01

    Single-phase zinc aluminate (ZnAl2O4) with the spinel structure was successfully obtained by the Pechini method at different calcining temperatures for 4 hours. The nanoparticles are highly crystalline with no impurities related to ZnO or Al2O3 residues. The microstructural environment of aluminium ions changes with heat treatment temperature, as observed by Fourier transform infrared spectroscopy. The spinel structure might present two different AlO6 sites as evidenced by 27Al solid-state magic-angle-spinning nuclear magnetic resonance spectra. Some AlO4 sites were also detected for samples calcined at a temperature lower than 900 degrees C. The photoluminescence spectra show that the emission can be tuned depending on the calcining temperature. This effect was discussed on the basis of symmetry and oxygen vacancies.

  14. Development of B2 Shape Memory Intermetallics Beyond NiAl, CoNiAl and CoNiGa

    NASA Astrophysics Data System (ADS)

    Gerstein, G.; Firstov, G. S.; Kosorukova, T. A.; Koval, Yu. N.; Maier, H. J.

    2018-06-01

    The present study describes the development of shape memory alloys based on NiAl. Initially, this system was considered a promising but unsuccessful neighbour of NiTi. Later, however, shape memory alloys like CoNiAl or CoNiGa were developed that can be considered as NiAl derivatives and already demonstrated good mechanical properties. Yet, these alloys were still inferior to NiTi in most respects. Lately, using a multi-component approach, a CoNiCuAlGaIn high entropy intermetallic compound was developed from the NiAl prototype. This new alloy featured a B2 phase and a martensitic transformation along with a remarkable strength in the as-cast state. In the long-term, this new approach might led to a breakthrough for shape memory alloys in general.

  15. Cathodoluminescence study on local high-energy emissions at dark spots in AlGaN/AlGaN multiple quantum wells

    NASA Astrophysics Data System (ADS)

    Kurai, Satoshi; Imura, Nobuto; Jin, Li; Miyake, Hideto; Hiramatsu, Kazumasa; Yamada, Yoichi

    2018-06-01

    We investigated the spatial distribution of luminescence near threading dislocations in AlGaN/AlGaN multiple quantum wells (MQWs) by cathodoluminescence mapping. Emission at the higher-energy side of the AlGaN MQW peak was locally observed near the threading dislocations, which were not accompanied by any surface V-pits. Such higher-energy emission was not observed in the AlGaN epilayers. The energy difference between the AlGaN MQW peak and the higher-energy emission peak increased with increasing barrier-layer Al composition. These results suggest that the origin of the higher-energy emission is likely local thickness fluctuation around dislocations in very thin AlGaN MQWs.

  16. Temperature dependent DC characterization of InAlN/(AlN)/GaN HEMT for improved reliability

    NASA Astrophysics Data System (ADS)

    Takhar, K.; Gomes, U. P.; Ranjan, K.; Rathi, S.; Biswas, D.

    2015-02-01

    InxAl1-xN/AlN/GaN HEMT device performance is analysed at various temperatures with the help of physics based 2-D simulation using commercially available BLAZE and GIGA modules from SILVACO. Various material parameters viz. band-gap, low field mobility, density of states, velocity saturation, and substrate thermal conductivity are considered as critical parameters for predicting temperature effect in InxAl1-xN/AlN/GaN HEMT. Reduction in drain current and transconductance has been observed due to the decrease of 2-DEG mobility and effective electron velocity with the increase in temperature. Degradation in cut-off frequency follows the transconductance profile as variation in gate-source/gate-drain capacitances observed very small.

  17. Luminescence of Eu:Y3Al5O12, Eu:Lu3Al5O12, and Eu:GdAlO3 Nanocrystals Synthesized by Solution Combustion

    NASA Astrophysics Data System (ADS)

    Vilejshikova, E. V.; Khort, A. A.; Podbolotov, K. B.; Loiko, P. A.; Shimanski, V. I.; Shashkov, S. N.; Yumashev, K. V.

    2017-11-01

    Nanocrystals of rare-earth garnets Y3Al5O12 and Lu3Al5O12 and perovskite GdAlO3 highly doped (10-20 at%) with Eu3+ are synthesized by the solution combustion technique and subsequent annealing in air at 800 and 1300oC. Their structure, morphology, and phase composition are studied. These materials exhibit intense red luminescence under UV excitation. Eu:GdAlO3 luminescence has CIE 1931 color coordinates (0.632, 0.368); dominant wavelength, 599.6 nm; and color purity, >99%. Judd-Ofelt parameters, luminescence branching ratios, and lifetimes of the Eu3+ 5D0 state are determined. The luminescence quantum yield for Eu:GdAlO3 (10 at%) reaches 74% with a lifetime of 1.4 ms for the 5D0 state. The synthesized materials are promising for red ceramic phosphors.

  18. The oxidation of Ni-rich Ni-Al intermetallics

    NASA Technical Reports Server (NTRS)

    Doychak, Joseph; Smialek, James L.; Barrett, Charles A.

    1988-01-01

    The oxidation of Ni-Al intermetallic alloys in the beta-NiAl phase field and in the two phase beta-NiAl/gamma'-Ni3Al phase field has been studied between 1000 and 1400 C. The stoichiometric beta-NiAl alloy doped with Zr was superior to other alloy compositions under cyclic and isothermal oxidation. The isothermal growth rates did not increase monotonically as the alloy Al content was decreased. The characteristically ridged alpha-Al2O3 scale morphology, consisting of cells of thin, textured oxide with thick growth ridges at cell boundaries, forms on oxidized beta-NiAl alloys. The correlation of scale features with isothermal growth rates indicates a predominant grain boundary diffusion growth mechanism. The 1200 C cyclic oxidation resistance decreases near the lower end of the beta-NiAl phase field.

  19. Chemical Bonding of AlH3 Hydride by Al-L2,3 Electron Energy-Loss Spectra and First-Principles Calculations

    PubMed Central

    Tatsumi, Kazuyoshi; Muto, Shunsuke; Ikeda, Kazutaka; Orimo, Shin-Ichi

    2012-01-01

    In a previous study, we used transmission electron microscopy and electron energy-loss (EEL) spectroscopy to investigate dehydrogenation of AlH3 particles. In the present study, we systematically examine differences in the chemical bonding states of Al-containing compounds (including AlH3) by comparing their Al-L2,3 EEL spectra. The spectral chemical shift and the fine peak structure of the spectra were consistent with the degree of covalent bonding of Al. This finding will be useful for future nanoscale analysis of AlH3 dehydrogenation toward the cell. PMID:28816996

  20. Overdamped Nb/Al-AlO{sub x}/Nb Josephson junctions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lacquaniti, V.; Cagliero, C.; Maggi, S.

    2005-01-24

    We report the fabrication and characterization of overdamped Nb/Al-AlO{sub x}/Nb superconductor-insulator-superconductor Josephson junction whose fabrication process derives from that of the well-known hysteretic junctions. These junctions are an intermediate state between the superconductor-normal metal-superconductor and the superconductor-insulator-superconductor Josephson junctions. Stable and reproducible nonhysteretic current-voltage characteristics are obtained with a proper choice of the fabrication parameters. We have measured critical current densities J{sub C} from 10{sup 3} up to 2x10{sup 4} A/cm{sup 2}, with characteristic voltages from 80 to nearly 450 {mu}V. The junctions are stable against time and repeated thermal cycling.

  1. Influence of Al content on non-equilibrium solidification behavior of Ni-Al-Ta model single crystal alloys

    NASA Astrophysics Data System (ADS)

    Ai, Cheng; Zhou, Jian; Zhang, Heng; Zhao, Xinbao; Pei, Yanling; Li, Shusuo; Gong, Shengkai

    2016-01-01

    The non-equilibrium solidification behaviors of five Ni-Al-Ta ternary model single crystal alloys with different Al contents were investigated by experimental analysis and theoretical calculation (by JMatPro) in this study. These model alloys respectively represented the γ' phase with various volume fractions (100%, 75%, 50%, 25% and 0%) at 900 °C. It was found that with decreasing Al content, liquidus temperature of experimental alloys first decreased and then increased. Meanwhile, the solidification range showed a continued downward trend. In addition, with decreasing Al content, the primary phases of non-equilibrium solidified model alloys gradually transformed from γ' phase to γ phase, and the area fraction of which first decreased and then increased. Moreover, the interdendritic/intercellular precipitation of model alloys changed from β phase (for 100% γ') to (γ+γ')Eutectic (for 75% γ'), (γ+γ')Eutectic+γ' (for 50% γ' and 25% γ') and none interdendritic precipitation (for 0% γ'), and the last stage non-equilibrium solidification sequence of model alloys was determined by the nominal Al content and different microsegregation behaviors of Al element.

  2. CTC Sentinel. Volume 6, Issue 9. September 2013

    DTIC Science & Technology

    2013-09-01

    Yemeni government officials trumpeted the “ liberation ” of Abyan from Ansar al- Shari`a fighters.4 Yet the year that has followed has made such...Pacifico Sur en el estado de Morelos,” EFE, February 11, 2013. 7 “Cronologia narcotraficantes caidos en los ultimos anos,” El Universal, July 15

  3. Forward Current Transport Mechanisms of Ni/Au—InAlN/AlN/GaN Schottky Diodes

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Feng; Shao, Zhen-Guang; Chen, Dun-Jun; Lu, Hai; Zhang, Rong; Zheng, You-Dou

    2014-05-01

    We fabricate two Ni/Au-In0.17Al0.83N/AlN/GaN Schottky diodes on substrates of sapphire and Si, respectively, and investigate their forward-bias current transport mechanisms by temperature-dependent current-voltage measurements. In the temperature range of 300-485 K, the Schottky barrier heights (SBHs) calculated by using the conventional thermionic-emission (TE) model are strongly positively dependent on temperature, which is in contrast to the negative-temperature-dependent characteristic of traditional semiconductor Schottky diodes. By fitting the forward-bias I-V characteristics using different current transport models, we find that the tunneling current model can describe generally the I-V behaviors in the entire measured range of temperature. Under the high forward bias, the traditional TE mechanism also gives a good fit to the measured I-V data, and the actual barrier heights calculated according to the fitting TE curve are 1.434 and 1.413 eV at 300K for InAlN/AlN/GaN Schottky diodes on Si and the sapphire substrate, respectively, and the barrier height shows a slightly negative temperature coefficient. In addition, a formula is given to estimate SBHs of Ni/Au—InAlN/AlN/GaN Schottky diodes taking the Fermi-level pinning effect into account.

  4. Improved Energetic-Behaviors of Spontaneously Surface-Mediated Al Particles.

    PubMed

    Kim, Dong Won; Kim, Kyung Tae; Min, Tae Sik; Kim, Kyung Ju; Kim, Soo Hyung

    2017-07-05

    Surface-mediated Al particles are synthesized by incorporating the stable fluoride reaction of Al-F on a pure Al surface in place of natural oxides. Al particles with fluoro-polymer directly adsorbed on the surface show a considerable capability to overcome limitations caused by the surface oxide. Here, we report that Al fluoride when spontaneously formed at the poly(vinylidene fluoride)/Al interface serves as an oxidation-protecting layer while also providing an efficient combustion path along which the internal Al rapidly reacts with external oxygen atoms. Both thermal oxidation and explosion tests of the poly(vinylidene fluoride)/Al particles show superior exothermic enthalpy energy and simultaneously rapid oxidation reactivity compared to those of Al 2 O 3 passivated Al particles. It is clearly elucidated that the enhanced energetic properties of Al particles mediated by poly(vinylidene fluoride) originate from the extraordinary pyrolytic process of Al fluoride occurring at a low temperature compared to Al 2 O 3 passivated Al. Hence, these results clarify that the surface mediation of Al particles can be significantly considered as advanced technology for many energetic applications.

  5. Temperature-dependent OSL properties of nano-phosphors LiAlO2:C and α-Al2O3:C

    NASA Astrophysics Data System (ADS)

    Agarwal, Mini; Garg, Sandeep K.; Asokan, K.; Kumar, Pratik

    2018-06-01

    The present study focuses on the synthesis and characterization of carbon doped nano-phosphors, LiAlO2 and α-Al2O3 and their temperature-dependent optically stimulated luminescence (TA-OSL) characteristics in the temperature ranges of 25-350 °C. These nano-phosphors with the carbon concentration of 0.01 mol% exhibits high luminescent intensity for LiAlO2:C in the low dose range of 1 mGy-7 Gy and for α-Al2O3:C in the range of 100 mGy-1 kGy. Both these nano-phosphors are of polycrystalline in nature, having grain size 15-50 nm as confirmed by the X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM), respectively. The maximum TA-OSL intensities are observed at 125 °C for LiAlO2:C and 200 °C for Al2O3:C, and reveal the presence of deep defect centres. The Arrhenius analysis shows the activation energies Ea = 0.06 ± 0.02 eV for LiAlO2:C and Ea = 0.04 ± 0.01 eV, & Eb = 0.48 ± 0.07 eV for Al2O3:C. The TA-OSL and OSL characteristics are discussed with special reference to the medical and high radiation dosimetry. These compounds, LiAlO2:C and α-Al2O3:C, are non-toxic, robust and are potential candidates for reusable dosimetry.

  6. Genotypic differences in Al resistance and the role of cell-wall pectin in Al exclusion from the root apex in Fagopyrum tataricum

    PubMed Central

    Yang, Jian Li; Zhu, Xiao Fang; Zheng, Cheng; Zhang, Yue Jiao; Zheng, Shao Jian

    2011-01-01

    Background and Aims Aluminium (Al) toxicity is one of the factors limiting crop production on acid soils. However, genotypic differences exist among plant species or cultivars in response to Al toxicity. This study aims to investigate genotypic differences among eight cultivars of tatary buckwheat (Fagopyrum tataricum) for Al resistance and explore the possible mechanisms of Al resistance. Methods Al resistance was evaluated based on relative root elongation (root elongation with Al/root elongation without Al). Root apex Al content, pectin content and exudation of root organic acids were determined and compared. Key Results Genotypic differences among the eight cultivars were correlated with exclusion of Al from the root apex. However, there was a lack of correlation between Al exclusion and Al-induced oxalate secretion. Interestingly, cell-wall pectin content of the root apex was generally lower in Al-resistant cultivars than in Al-sensitive cultivars. Although we were unable to establish a significant correlation between Al exclusion and pectin content among the eight cultivars, a strong correlation could be established among six cultivars, in which the pectin content in the most Al-resistant cultivar ‘Chuan’ was significantly lower than that in the most Al-sensitive cultivar ‘Liuku2’. Furthermore, root apex cell-wall pectin methylesterase activity (PME) was similar in ‘Chuan’ and ‘Liuku2’ in the absence of Al, but Al treatment resulted in increased PME activity in ‘Liuku2’ compared with ‘Chuan’. Immunolocalization of pectins also showed that the two cultivars had similar amounts of either low-methyl-ester pectins or high-methyl-ester pectins in the absence of Al, but Al treatment resulted in a more significant increase of low-methyl-ester pectins and decrease of high-methyl-ester pectins in ‘Liuku2’. Conclusions Cell-wall pectin content may contribute, at least in part, to differential Al resistance among tatary buckwheat cultivars

  7. Seguridad Laboral al Usar Pesticidas

    EPA Pesticide Factsheets

    Para proteger a la gente que trabaja con pesticidas y quienes laboran en áreas tratadas con pesticidas; para educar al personal médico y al público acerca de cómo reconocer y tratar las enfermedades relacionadas a los pesticidas.

  8. Fosetyl-al

    Integrated Risk Information System (IRIS)

    Integrated Risk Information System ( IRIS ) Chemical Assessment Summary U.S . Environmental Protection Agency National Center for Environmental Assessment This IRIS Summary has been removed from the IRIS database and is available for historical reference purposes . ( July 2016 ) Fosetyl - al ; CASRN

  9. The Reality of Neandertal Symbolic Behavior at the Grotte du Renne, Arcy-sur-Cure, France

    PubMed Central

    Caron, François; d'Errico, Francesco; Del Moral, Pierre; Santos, Frédéric; Zilhão, João

    2011-01-01

    Background The question of whether symbolically mediated behavior is exclusive to modern humans or shared with anatomically archaic populations such as the Neandertals is hotly debated. At the Grotte du Renne, Arcy-sur-Cure, France, the Châtelperronian levels contain Neandertal remains and large numbers of personal ornaments, decorated bone tools and colorants, but it has been suggested that this association reflects intrusion of the symbolic artifacts from the overlying Protoaurignacian and/or of the Neandertal remains from the underlying Mousterian. Methodology/Principal Findings We tested these hypotheses against the horizontal and vertical distributions of the various categories of diagnostic finds and statistically assessed the probability that the Châtelperronian levels are of mixed composition. Our results reject that the associations result from large or small scale, localized or generalized post-depositional displacement, and they imply that incomplete sample decontamination is the parsimonious explanation for the stratigraphic anomalies seen in the radiocarbon dating of the sequence. Conclusions/Significance The symbolic artifacts in the Châtelperronian of the Grotte du Renne are indeed Neandertal material culture. PMID:21738702

  10. Sporadic and hereditary amyotrophic lateral sclerosis (ALS).

    PubMed

    Ajroud-Driss, Senda; Siddique, Teepu

    2015-04-01

    Genetic discoveries in ALS have a significant impact on deciphering molecular mechanisms of motor neuron degeneration. The identification of SOD1 as the first genetic cause of ALS led to the engineering of the SOD1 mouse, the backbone of ALS research, and set the stage for future genetic breakthroughs. In addition, careful analysis of ALS pathology added valuable pieces to the ALS puzzle. From this joint effort, major pathogenic pathways emerged. Whereas the study of TDP43, FUS and C9ORF72 pointed to the possible involvement of RNA biology in motor neuron survival, recent work on P62 and UBQLN2 refocused research on protein degradation pathways. Despite all these efforts, the etiology of most cases of sporadic ALS remains elusive. Newly acquired genomic tools now allow the identification of genetic and epigenetic factors that can either increase ALS risk or modulate disease phenotype. These developments will certainly allow for better disease modeling to identify novel therapeutic targets for ALS. This article is part of a Special Issue entitled: Neuromuscular Diseases: Pathology and Molecular Pathogenesis. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. Formation of (Ti,Al)N/Ti{sub 2}AlN multilayers after annealing of TiN/TiAl(N) multilayers deposited by ion beam sputtering

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dolique, V.; Jaouen, M.; Cabioc'h, T.

    2008-04-15

    By using ion beam sputtering, TiN/TiAl(N) multilayers of various modulation wavelengths ({lambda}=8, 13, and 32 nm) were deposited onto silicon substrates at room temperature. After annealing at 600 deg. C in vacuum, one obtains for {lambda}=13 nm a (Ti,Al)N/Ti{sub 2}AlN multilayer as it is evidenced from x-ray diffraction, high resolution transmission electron microscopy, and energy filtered electron imaging experiments. X-ray photoelectron spectroscopy (XPS) experiments show that the as-deposited TiAl sublayers contain a noticeable amount of nitrogen atoms which mean concentration varies with the period {lambda}. They also evidenced the diffusion of aluminum into TiN sublayers after annealing. Deduced from thesemore » observations, we propose a model to explain why this solid-state phase transformation depends on the period {lambda} of the multilayer.« less

  12. An Alternative Perspective on von Winterfeldt et al.'s (1997) Test of Consequence Monotonicity

    ERIC Educational Resources Information Center

    Ho, Moon-Ho R.; Regenwetter, Michel; Niederee, Reinhard; Heyer, Dieter

    2005-01-01

    D. von Winterfeldt, N.-K. Chung, R. D. Luce, and Y. Cho (see record 1997-03378-008) provided several tests for consequence monotonicity of choice or judgment, using certainty equivalents of gambles. The authors reaxiomatized consequence monotonicity in a probabilistic framework and reanalyzed von Winterfeldt et al.'s main experiment via a…

  13. Ti2Al(C, N) Solid Solution Reinforcing TiAl-Based Composites: Evolution of a Core-Shell Structure, Interfaces, and Mechanical Properties.

    PubMed

    Song, Xiaojie; Cui, Hongzhi; Han, Ye; Ding, Lei; Song, Qiang

    2018-05-16

    In this work, Ti 2 Al(C, N) solid solution with lamellar structure-enhanced TiAl matrix composites was synthesized by vacuum arc melting, using bulk g-C 3 N 4 , Ti, and Al powders as raw materials. The phases, microstructures, interfaces, and mechanical properties were investigated. MAX phase of Ti 2 Al(C, N) solid solution with lamellar structure was formed. During the melting process, first, C 3 N 4 reacted with Ti to form Ti(C, N) by Ti + C 3 N 4 → Ti(C, N). Then Ti 2 Al(C, N) was formed by a peritectic reaction of TiAl(l) + Ti(C, N)(s) → Ti 2 Al(C, N). C 3 N 4 is the single reactant that provides C and N simultaneously to final product of Ti 2 Al(C, N). The interfaces of TiAl//Ti 2 Al(C, N) and Ti 2 Al(C, N)//Ti(C, N) display perfect orientation relationships with low misfit values. The microhardness, compressive strength, and strain of best-performing TiAl-10 mol % Ti 2 Al(C, N) composite were improved by 45%, 55.7%, and 50% compared with the TiAl alloy, respectively. Uniformly distributed Ti 2 Al(C, N) and unreacted Ti(C, N) particles contributed to the grain refinement and reinforcement of the TiAl matrix. Laminated tearing, particle pull-out, and the crack-arresting of Ti 2 Al(C, N) are crucial for the improvement in compressive strength and plasticity of the composites.

  14. [Al-Biruni--a universal scientist].

    PubMed

    Kujundzić, E; Masić, I

    1999-01-01

    Al-Biruni's was of Persian descent. He was born in Horesmiya and had studied mathematics, history and medicine. Acquiring knowledge from these sciences, he wrote an outstanding work on chronology of several nations and devoted it to Ziyarit ruler Kabus. He made a chronological overview of calendars from many nations, including Persians, Greeks, Egyptians, Jews, Melkitian and Nestorian Christians, Sabeyaans as well as the old Arabs. Data presented in the work, according to the later authors, were taken from very reliable sources. He was contemporary of Ibn-Sina, and thanks to their friendship, they have discussed very much miscellaneous topics. He belonged to the group of scholars, taken by Gaznevian Soultan Mahmud to a long journey to India. Afterwards Al-Biruni wrote and published detailed work "Description of India"--a work on cultural history of India. Due to excellent abilities of Al-Biruni as a philosopher and scholar, there are still significant and reliable notes about buddhistic philosophy, structure of castes and Brahmans' life style. In this Al-Biruni's masterpiece, there are many comparative analysis of Suffism and certain Indian philosophical methods. Al-Biruni's most important work is "Pharmacopoeia"--"Kitab al-saydala", which brilliantly describes all medicaments. This work has been published in many languages. He also wrote few works on astronomy and astrology. In those works he has explained some astrological events through scientific approach in a such peculiar way that nobody has ever explained before. He was also interested in sciences like geology, mineralology, geography, mathematics, psychology and many others.

  15. Als1 and Als3 regulate the intracellular uptake of copper ions when Candida albicans biofilms are exposed to metallic copper surfaces.

    PubMed

    Zheng, Sha; Chang, Wenqiang; Li, Chen; Lou, Hongxiang

    2016-05-01

    Copper surfaces possess efficient antimicrobial effect. Here, we reported that copper surfaces could inactivate Candida albicans biofilms within 40 min. The intracellular reactive oxygen species in C. albicans biofilms were immediately stimulated during the contact of copper surfaces, which might be an important factor for killing the mature biofilms. Copper release assay demonstrated that the copper ions automatically released from the surface of 1 mm thick copper coupons with over 99.9% purity are not the key determinant for the copper-mediated killing action. The susceptibility test to copper surfaces by using C. albicans mutant strains, which were involved in efflux pumps, adhesins, biofilms formation or osmotic stress response showed that als1/als1 and als3/als3 displayed higher resistance to the copper surface contact than other mutants did. The intracellular concentration of copper ions was lower in als1/als1 and als3/als3 than that in wild-type strain. Transcriptional analysis revealed that the expression of copper transporter-related gene, CRP1, was significantly increased in als1/als1, als3/als3, suggesting a potential role of ALS1 and ALS3 in absorbing ions by regulating the expression of CRP1 This study provides a potential application in treating pathogenic fungi by using copper surfaces and uncovers the roles of ALS1 and ALS3 in absorbing copper ions for C. albicans. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  16. Cryptanalysis and improvement of Yan et al.'s biometric-based authentication scheme for telecare medicine information systems.

    PubMed

    Mishra, Dheerendra; Mukhopadhyay, Sourav; Chaturvedi, Ankita; Kumari, Saru; Khan, Muhammad Khurram

    2014-06-01

    Remote user authentication is desirable for a Telecare Medicine Information System (TMIS) for the safety, security and integrity of transmitted data over the public channel. In 2013, Tan presented a biometric based remote user authentication scheme and claimed that his scheme is secure. Recently, Yan et al. demonstrated some drawbacks in Tan's scheme and proposed an improved scheme to erase the drawbacks of Tan's scheme. We analyze Yan et al.'s scheme and identify that their scheme is vulnerable to off-line password guessing attack, and does not protect anonymity. Moreover, in their scheme, login and password change phases are inefficient to identify the correctness of input where inefficiency in password change phase can cause denial of service attack. Further, we design an improved scheme for TMIS with the aim to eliminate the drawbacks of Yan et al.'s scheme.

  17. RHEED and EELS study of Pd/Al bimetallic thin film growth on different α-Al 2O 3 substrates

    NASA Astrophysics Data System (ADS)

    Moroz, V.; Rajs, K.; Mašek, K.

    2002-06-01

    Pd/Al bimetallic thin films were grown by molecular beam epitaxy on single-crystalline α-Al 2O 3(0 0 0 1) and (1 1 2¯ 0) surfaces. Substrate and deposit crystallographic structures and evolution of deposit lattice parameter during the growth were studied by reflection high-energy electron diffraction. The electron energy loss spectroscopy was used as an auxiliary method for chemical analysis. The bimetallic films were prepared by successive deposition of both Pd and Al metals. The structure of Pd and Al deposits in early stages of the growth and its dependence on the preparation conditions were studied. Two phases of Pd clusters covered by Al overlayer have been found. The formation of Al overlayer strongly influenced the lattice parameter of Pd clusters.

  18. SiO2/AlON stacked gate dielectrics for AlGaN/GaN MOS heterojunction field-effect transistors

    NASA Astrophysics Data System (ADS)

    Watanabe, Kenta; Terashima, Daiki; Nozaki, Mikito; Yamada, Takahiro; Nakazawa, Satoshi; Ishida, Masahiro; Anda, Yoshiharu; Ueda, Tetsuzo; Yoshigoe, Akitaka; Hosoi, Takuji; Shimura, Takayoshi; Watanabe, Heiji

    2018-06-01

    Stacked gate dielectrics consisting of wide bandgap SiO2 insulators and thin aluminum oxynitride (AlON) interlayers were systematically investigated in order to improve the performance and reliability of AlGaN/GaN metal–oxide–semiconductor (MOS) devices. A significantly reduced gate leakage current compared with that in a single AlON layer was achieved with these structures, while maintaining the superior thermal stability and electrical properties of the oxynitride/AlGaN interface. Consequently, distinct advantages in terms of the reliability of the gate dielectrics, such as an improved immunity against electron injection and an increased dielectric breakdown field, were demonstrated for AlGaN/GaN MOS capacitors with optimized stacked structures having a 3.3-nm-thick AlON interlayer.

  19. Influence of impact speed on water droplet erosion of TiAl compared with Ti6Al4V

    PubMed Central

    Mahdipoor, M.S.; Kirols, H.S.; Kevorkov, D.; Jedrzejowski, P.; Medraj, M.

    2015-01-01

    Water Droplet Erosion (WDE) as a material degradation phenomenon has been a concern in power generation industries for decades. Steam turbine blades and the compressor blades of gas turbines that use water injection usually suffer from WDE. The present work focuses on studying erosion resistance of TiAl as a potential alloy for turbine blades compared to Ti6Al4V, a frequently used blade alloy. Their erosion behaviour is investigated at different droplet impact speeds to determine the relation between erosion performance and impact speed. It is found that the relationship is governed by a power law equation, ER ~ Vn, where the speed exponent is 7–9 for Ti6Al4V and 11–13 for TiAl. There is a contrast between the observed speed exponent in this work and the ones reported in the literature for Ti6Al4V. It is attributed to the different erosion setups and impingement conditions such as different droplet sizes. To verify this, the erosion experiments were performed at two different droplet sizes, 464 and 603 μm. TiAl showed superior erosion resistance in all erosion conditions; however, its erosion performance exhibits higher sensitivity to the impact speed compared to Ti6Al4V. It means that aggressive erosion conditions decrease the WDE resistance superiority of TiAl. PMID:26391370

  20. Influence of impact speed on water droplet erosion of TiAl compared with Ti6Al4V.

    PubMed

    Mahdipoor, M S; Kirols, H S; Kevorkov, D; Jedrzejowski, P; Medraj, M

    2015-09-22

    Water Droplet Erosion (WDE) as a material degradation phenomenon has been a concern in power generation industries for decades. Steam turbine blades and the compressor blades of gas turbines that use water injection usually suffer from WDE. The present work focuses on studying erosion resistance of TiAl as a potential alloy for turbine blades compared to Ti6Al4V, a frequently used blade alloy. Their erosion behaviour is investigated at different droplet impact speeds to determine the relation between erosion performance and impact speed. It is found that the relationship is governed by a power law equation, ER ~ V(n), where the speed exponent is 7-9 for Ti6Al4V and 11-13 for TiAl. There is a contrast between the observed speed exponent in this work and the ones reported in the literature for Ti6Al4V. It is attributed to the different erosion setups and impingement conditions such as different droplet sizes. To verify this, the erosion experiments were performed at two different droplet sizes, 464 and 603 μm. TiAl showed superior erosion resistance in all erosion conditions; however, its erosion performance exhibits higher sensitivity to the impact speed compared to Ti6Al4V. It means that aggressive erosion conditions decrease the WDE resistance superiority of TiAl.