Science.gov

Sample records for periodic mesoporous organosilicas

  1. Periodic Mesoporous Organosilica Nanorice

    NASA Astrophysics Data System (ADS)

    Mohanty, Paritosh; Landskron, Kai

    2009-02-01

    A periodic mesoporous organosilica (PMO) with nanorice morphology was successfully synthesized by a template assisted sol-gel method using a chain-type precursor. The PMO is composed of D and T sites in the ratio 1:2. The obtained mesoporous nanorice has a surface area of 753 m2 g-1, one-dimensional channels, and a narrow pore size distribution centered at 4.3 nm. The nanorice particles have a length of ca. 600 nm and width of ca. 200 nm.

  2. Syntheses and applications of periodic mesoporous organosilica nanoparticles.

    PubMed

    Croissant, Jonas G; Cattoën, Xavier; Wong, Michel Chi Man; Durand, Jean-Olivier; Khashab, Niveen M

    2015-12-28

    Periodic Mesoporous Organosilica (PMO) nanomaterials are envisioned to be one of the most prolific subjects of research in the next decade. Similar to mesoporous silica nanoparticles (MSN), PMO nanoparticles (NPs) prepared from organo-bridged alkoxysilanes have tunable mesopores that could be utilized for many applications such as gas and molecule adsorption, catalysis, drug and gene delivery, electronics, and sensing; but unlike MSN, the diversity in chemical nature of the pore walls of such nanomaterials is theoretically unlimited. Thus, we expect that PMO NPs will attract considerable interest over the next decade. In this review, we will present a comprehensive overview of the synthetic strategies for the preparation of nanoscaled PMO materials, and then describe their applications in catalysis and nanomedicine. The remarkable assets of the PMO structure are also detailed, and insights are provided for the preparation of more complex PMO nanoplatforms. PMID:26585498

  3. Syntheses and applications of periodic mesoporous organosilica nanoparticles

    NASA Astrophysics Data System (ADS)

    Croissant, Jonas G.; Cattoën, Xavier; Wong Chi Man, Michel; Durand, Jean-Olivier; Khashab, Niveen M.

    2015-12-01

    Periodic Mesoporous Organosilica (PMO) nanomaterials are envisioned to be one of the most prolific subjects of research in the next decade. Similar to mesoporous silica nanoparticles (MSN), PMO nanoparticles (NPs) prepared from organo-bridged alkoxysilanes have tunable mesopores that could be utilized for many applications such as gas and molecule adsorption, catalysis, drug and gene delivery, electronics, and sensing; but unlike MSN, the diversity in chemical nature of the pore walls of such nanomaterials is theoretically unlimited. Thus, we expect that PMO NPs will attract considerable interest over the next decade. In this review, we will present a comprehensive overview of the synthetic strategies for the preparation of nanoscaled PMO materials, and then describe their applications in catalysis and nanomedicine. The remarkable assets of the PMO structure are also detailed, and insights are provided for the preparation of more complex PMO nanoplatforms.

  4. Hollow periodic mesoporous organosilica nanospheres by a facile emulsion approach.

    PubMed

    Ma, Xiaobo; Zhang, Junjie; Dang, Meng; Wang, Jin; Tu, Zenzen; Yuwen, Lihui; Chen, Guotao; Su, Xiaodan; Teng, Zhaogang

    2016-08-01

    Periodic mesoporous organosilicas (PMOs) with homogeneously incorporated organic groups, highly ordered mesopores, and controllable morphology have attracted increasing attention. In this work, one-step emulsion approach for preparation of hollow periodic mesoporous organosilica (HPMO) nanospheres has been established. The method is intrinsically simple and does not require any sacrificial templates, corrosive and toxic etching agents. The obtained HPMO nanospheres have high surface area (∼950m(2)g(-1)), accessible ordered mesochannels (∼3.4nm), large pore volume (∼3.96cm(3)g(-1)), high condensation degree (77%), and diameter (∼560nm), hollow chamber size (∼400nm), and shell thickness (∼80nm). Furthermore, cytotoxicity show the cell viability is higher than 86% after incubating with the HPMO nanospheres at a concentration of up to 1200μgmL(-1) for 24h. The hemolysis of HPMO nanospheres is lower than 1.1% at concentrations ranging from 10 to 2000μgmL(-1). The lower hemolysis and cytotoxicity make the HPMO nanospheres great promise for future biomedical applications. PMID:27156086

  5. Highly ordered periodic mesoporous organosilica nanoparticles with controllable pore structures

    NASA Astrophysics Data System (ADS)

    Guan, Buyuan; Cui, Yan; Ren, Zhongyuan; Qiao, Zhen-An; Wang, Li; Liu, Yunling; Huo, Qisheng

    2012-09-01

    A general synthetic procedure for highly ordered and well-dispersed periodic mesoporous organosilica (PMO) nanoparticles is reported based on a single cationic surfactant cetyltrimethylammonium bromide (CTAB) and simple silica sources with organic bridging groups via an ammonia-catalyzed sol-gel reaction. By changing the bridging group in the silica sources, the pore structures of the as-made particles with three-dimensional hexagonal (P63/mmc), cubic (Pm3n), two-dimensional hexagonal (P6mm), and wormlike structure were evidenced by powder X-ray diffraction analysis (XRD) and transmission electron microscopy (TEM). The size range of the nanoparticles can be adjusted from 30 nm to 500 nm by variation of the ammonia concentration or the co-solvent content of the reaction medium. The PMO nanoparticles with high concentration of organic groups in the framework offered good thermal stability, good dispersion in low polarity solvent and high adsorption of small hydrophobic molecules. Finally, the dye functionalized PMO nanoparticles show low cytotoxicity and excellent cell permeability, which offers great potential for biomedical applications.A general synthetic procedure for highly ordered and well-dispersed periodic mesoporous organosilica (PMO) nanoparticles is reported based on a single cationic surfactant cetyltrimethylammonium bromide (CTAB) and simple silica sources with organic bridging groups via an ammonia-catalyzed sol-gel reaction. By changing the bridging group in the silica sources, the pore structures of the as-made particles with three-dimensional hexagonal (P63/mmc), cubic (Pm3n), two-dimensional hexagonal (P6mm), and wormlike structure were evidenced by powder X-ray diffraction analysis (XRD) and transmission electron microscopy (TEM). The size range of the nanoparticles can be adjusted from 30 nm to 500 nm by variation of the ammonia concentration or the co-solvent content of the reaction medium. The PMO nanoparticles with high concentration of organic

  6. Functionalized periodic mesoporous organosilicas for selective adsorption of proteins

    NASA Astrophysics Data System (ADS)

    Zhu, Ling; Liu, Xiaoyan; Chen, Tong; Xu, Zhigang; Yan, Wenfu; Zhang, Haixia

    2012-07-01

    The periodic mesoporous organosilicas (PMO) with an organobridged (sbnd CH2sbnd ) was synthesized and functionalized with amino or carboxylic groups by post-synthesis methods. The functionalized PMO by changing the hydrophilic/hydrophobic property and the net charge could be used to selectively adsorb and purify proteins with different shapes and different isoelectric points (pI). The experimental result showed that Bovine serum albumin (BSA) was adsorbed quicker than hemoglobin (Hb) on the materials, and lysozyme (Lys) could not be adsorbed on these PMO materials at all. The adsorption capacity of amino groups modified PMO (PMO-(NH2)2) for BSA was 44.67 mg/g and 300.0 mg/gfor Hb on carboxylic groups modified PMO (PMO-(COOH)2). The adsorption behavior of proteins was affected strongly by the interaction among different constituents in the mixture of proteins. In addition, it is found that the adsorption rate of (PMO-(NH2)2 for adsorption of proteins was much slower than PMO-(COOH)2.

  7. Synthesis of Xylylene-Bridged Periodic Mesoporous Organosilicas and Related Hollow Spherical Nanoparticles.

    PubMed

    Manchanda, Amanpreet S; Kruk, Michal

    2016-01-26

    A variety of organosilicas with p-xylylene bridging groups in the framework were synthesized using Pluronic F127 triblock copolymer as a micellar template under moderately acidic conditions in the presence of xylene as a micelle swelling agent. The resulting materials were characterized by using nitrogen adsorption, small-angle X-ray scattering, transmission electron microscopy, and (29)Si and (13)C cross-polarization magic angle spinning NMR. As the ratio of the organosilica precursor to Pluronic F127 was decreased, the structure evolved from highly ordered periodic mesoporous organosilica (PMO) to weakly ordered PMO, loosely aggregated hollow organosilica nanospheres, and finally to a significantly aggregated disordered structure. The highly ordered PMO with primarily face-centered cubic structure was effectively a closed-pore material. However, the weakly ordered variant exhibited large-diameter (∼15 nm) spherical mesopores, which were accessible after calcination under appropriate conditions or after extraction. The hollow nanospheres had readily accessible, uniform inner cavities whose size was readily tunable by adjusting the amount of the swelling agent used. It was also possible to convert the organosilica nanospheres into hollow silica nanospheres with inaccessible (closed) mesopores. The formation of distinct well-defined morphologies with spherical mesopores for an organosilica with large bridging groups in the framework shows that block-copolymer-surfactant templating is a powerful and versatile method for controlling the nanoscale structures of these remarkable materials. PMID:26714054

  8. Controlled Cell Growth and Cell Migration in Periodic Mesoporous Organosilica/Alginate Nanocomposite Hydrogels.

    PubMed

    Seda Kehr, Nermin; Riehemann, Kristina

    2016-01-21

    Nanocomposite (NC) hydrogels with different periodic mesoporous organosilica (PMO) concentrations and a NC hydrogel bilayer with various PMO concentrations inside the layers of the hydrogel matrix are prepared. The effect of the PMO concentration on cell growth and migration of cells is reported. The cells migrate in the bilayer NC hydrogel towards higher PMO concentrations and from cell culture plates to NC hydrogel scaffolds. PMID:26648333

  9. Periodic mesoporous organosilica with molecular-scale ordering self-assembled by hydrogen bonds.

    PubMed

    Mizoshita, Norihiro; Inagaki, Shinji

    2015-10-01

    Nanoporous materials with functional frameworks have attracted attention because of their potential for various applications. Silica-based mesoporous materials generally consist of amorphous frameworks, whereas a molecular-scale lamellar ordering within the pore wall has been found for periodic mesoporous organosilicas (PMOs) prepared from bridged organosilane precursors. Formation of a "crystal-like" framework has been expected to significantly change the physical and chemical properties of PMOs. However, until now, there has been no report on other crystal-like arrangements. Here, we report a new molecular-scale ordering induced for a PMO. Our strategy is to form pore walls from precursors exhibiting directional H-bonding interaction. We demonstrate that the H-bonded organosilica columns are hexagonally packed within the pore walls. We also show that the H-bonded pore walls can stably accommodate H-bonding guest molecules, which represents a new method of modifying the PMO framework. PMID:26310201

  10. Synthesis and Characterization of Periodic Mesoporous Organosilicas as Anion-Exchance Resins for Perrhenate Adsorption.

    SciTech Connect

    Lee, Byunghwan; Im, Hee-Jung; Luo, Huimin; Hagaman, Edward {Ed} W; Dai, Sheng

    2005-01-01

    A new methodology to immobilize ionic liquids through the use of a bridged silsesquioxane N-(3-triethoxysilylpropyl), N(3)-3-trimethoxysilylpropyl-4,5-dihydroimidazolium iodide that incorporates an ionic functionality for the assembly of novel periodic mesoporous organosilica (PMO) materials has been developed. The resulting PMO materials were investigated for use as novel anion exchange resins for the separation of perrhenate anions in aqueous solution. As compared with cetyltrimethylammonium chloride, 1-hexadecane-3-methylimidazolium bromide has been demonstrated to be a more efficient surfactant template for the generation of mesopores and surface areas for such PMO materials.

  11. Simple Systematic Synthesis of Periodic Mesoporous Organosilica Nanoparticles with Adjustable Aspect Ratios

    NASA Astrophysics Data System (ADS)

    Mohanty, Paritosh; Landskron, Kai

    2009-12-01

    One-dimensional periodic mesoporous organosilica (PMO) nanoparticles with tunable aspect ratios are obtained from a chain-type molecular precursor octaethoxy-1,3,5-trisilapentane. The aspect ratio can be tuned from 2:1 to >20:1 simply by variation in the precursor concentration in acidic aqueous solutions containing constant amounts of triblock copolymer Pluronic P123. The mesochannels are highly ordered and are oriented parallel to the longitudinal axis of the PMO particles. No significant Si-C bond cleavage occurs during the synthesis according to 29Si MAS NMR. The materials exhibit surface areas between 181 and 936 m2 g-1.

  12. Heterocyclic tri-urea isocyanurate bridged groups modified periodic mesoporous organosilica synthesized for Fe(III) adsorption

    SciTech Connect

    Rana, Vijay Kumar; Selvaraj, M.; Parambadath, Surendran; Chu, Sang-Wook; Park, Sung Soo; Mishra, Satyendra; Singh, Raj Pal; Ha, Chang-Sik

    2012-10-15

    To achieve a high level of heavy metal adsorption, 1,1 Prime ,1 Double-Prime -(1,3,5-triazine-2,4,6-triyl)tris(3-(3-(triethoxysilyl)propyl)urea) (TTPU) was synthesized as a novel melamine precursor and incorporated on the silica surface of periodic mesoporous organosilica (PMO). The melamine modified PMOs (MPMOs) were synthesized under acidic conditions using TTPU, tetraethylorthosilicate (TEOS) and Pluronic P123 as a template and the modified PMOs were characterized using the relevant instrumental techniques. The characteristic materials were used as adsorbents for the adsorption of Fe(III) ions. Fe(III) adsorption studies revealed MPMO-7.5 to be a good absorbent with higher adsorption efficiency than other MPMOs. - Graphical Abstract: A new organosilica precursor, TTPU, has been successfully synthesized and characterized to incorporate on the silica surface of periodic mesoporous organosilica (PMO). The melamine modified PMOs (MPMOs), in particular, the MPMO-7.5 was found to exhibit good adsorption efficiency for Fe(III). Highlights: Black-Right-Pointing-Pointer Synthesis of new melamine modified periodic mesoporous organosilicas (MPMOs). Black-Right-Pointing-Pointer A new organosilica precursor, TTPU, has been successfully synthesized for the MPMOs. Black-Right-Pointing-Pointer The MPMOs were characterized by the relevant instrumental techniques. Black-Right-Pointing-Pointer MPMO-7.5 exhibits higher adsorption efficiency for Fe(III) ions than other MPMOs.

  13. Evaluation of phenylene-bridged periodic mesoporous organosilica as a stationary phase for solid phase extraction.

    PubMed

    Carpio, A; Esquivel, D; Arce, L; Romero-Salguero, F J; Van Der Voort, P; Jiménez-Sanchidrián, C; Válcarcel, M

    2014-11-28

    A periodic mesoporous organosilica, in particular, a phenylene-bridged material (Ph-PMO), was evaluated for the first time as a sorbent for retaining and eluting fenuron, simazine, atrazine, carbaryl and terbutryn in grape must by solid phase extraction (SPE) prior to their determination with capillary electrophoresis coupled with ultraviolet detection (CE-UV). The analytes were used as model compounds to demonstrate the potential of Ph-PMO for increasing the sensitivity of CE. Under optimal conditions, the limits of detection for the analytes ranged from 0.6 to 4 μg/L, and their limits of quantitation from 2 to 10 μg/L. These values were comparable and, in some cases, even better than those obtained with C18 and HLB materials. Ph-PMO was characterized physicochemically by X-ray diffraction analysis, N2 adsorption-desorption measurements and laser diffraction particle sizing. The sorbent afforded the extraction of atrazine, carbaryl and terbutryn from grape must with mean recoveries ranging from 86 to 105%. Therefore, periodic mesoporous organosilicas possess a high potential as SPE materials. PMID:25454127

  14. Synthesis and characterization of periodic mesoporous organosilicas from bridged organosilanes in the presence of mixed salts

    NASA Astrophysics Data System (ADS)

    Zhai, Shang-Ru; Kim, Il; Ha, Chang-Sik

    2008-01-01

    A simple but effective synthetic pathway to periodic mesoporous organosilicas (PMOs) has been put forward in this article. The novelty of the present preparative route lies in that, for specific examples, highly ordered ethane- and benzenesilica PMOs can be facilely prepared in the presence of an inorganic salt pair within a wide compositional range, where no addition of mineral acids was necessary. Most of interest is that crystal-like pore walls were observed for the large-pore benzenesilica PMO promoted by this novel system, which has rarely been reported for copolymer-assembled organosilicas, even though the degree of molecular order is not as perfect as those benzenesilicas prepared under basic conditions utilizing cationic surfactants as template. Characterization results based on a series of techniques indicated that both inorganic salts are important for the assembly of ordered mesostructures under the present system, and a plausible formation mechanism deduced from the "salt-assisted" concept as previously reported for mesoporous nonsiliceous materials was discussed.

  15. Periodic mesoporous organosilicas with co-existence of diurea and sulfanilamide as an effective drug delivery carrier

    SciTech Connect

    Parambadath, Surendran; Rana, Vijay Kumar; Moorthy, Santha; Chu, Sang-Wook; Park, Shin-Kyu; Lee, Daewoo; Sung, Giju; Ha, Chang-Sik

    2011-05-15

    In this article we report the synthesis of new periodic mesoporous organosilicas (PMOs) with the co-existence of diurea and sulfanilamide-bridged organosilica that are potentially useful for controlled drug release system. The materials possess hexagonal pores with a high degree of uniformity and show long-range order as confirmed by the measurements of small-angle X-ray scattering (SAXS), N{sub 2} adsorption isotherms, and transmission electron microscopy(TEM). FT-IR and solid state {sup 29}Si MAS and {sup 13}C CP MAS NMR spectroscopic analyses proved that the bridging groups in the framework are not cleaved and covalently attached in the walls of the PMOs. It was found that the organic functionality could be introduced in a maximum of 10 mol% with respect to the total silicon content and be thermally stable up to 230 {sup o}C. The synthesized materials were shown to be particularly suitable for adsorption and desorption of hydrophilic/hydrophobic drugs from a phosphate buffer solution at pH 7.4. -- Graphical Abstract: We report the synthesis of new periodic mesoporous organosilicas (PMOs) with the co-existence of diurea and sulfanilamide-bridged organosilica that are potentially useful for controlled drug release system. Display Omitted Highlights: {yields} Synthesis of new periodic mesoporous organosilicas (PMOs) with the co-existence of diurea and sulfanilamide-bridged organosilica that are potentially useful for controlled drug release system. {yields} The organic functionality could be introduced in a maximum of 10 mol% with respect to the total silicon content and be thermally stable up to 230 {sup o}C. {yields} The synthesized materials were shown to be particularly suitable for adsorption and desorption of hydrophilic/hydrophobic drugs from a phosphate buffer solution at pH 7.4.

  16. Ruthenium-Immobilized Periodic Mesoporous Organosilica: Synthesis, Characterization, and Catalytic Application for Selective Oxidation of Alkanes.

    PubMed

    Ishito, Nobuhiro; Kobayashi, Hirokazu; Nakajima, Kiyotaka; Maegawa, Yoshifumi; Inagaki, Shinji; Hara, Kenji; Fukuoka, Atsushi

    2015-10-26

    Periodic mesoporous organosilica (PMO) is a unique material that has a crystal-like wall structure with coordination sites for metal complexes. A Ru complex, [RuCl2 (CO)3 ]2 , is successfully immobilized onto 2,2'-bipyridine (BPy) units of PMO to form a single-site catalyst, which has been confirmed by various physicochemical analyses. Using NaClO as an oxidant, the Ru-immobilized PMO oxidizes the tertiary C-H bonds of adamantane to the corresponding alcohols at 57 times faster than the secondary C-H bonds, thereby exhibiting remarkably high regioselectivity. Moreover, the catalyst converts cis-decalin to cis-9-decalol in a 63 % yield with complete retention of the substrate stereochemistry. The Ru catalyst can be separated by simple filtration and reused without loss of the original activity and selectivity for the oxidation reactions. PMID:26330333

  17. Heterogeneous Catalysis for Water Oxidation by an Iridium Complex Immobilized on Bipyridine-Periodic Mesoporous Organosilica.

    PubMed

    Liu, Xiao; Maegawa, Yoshifumi; Goto, Yasutomo; Hara, Kenji; Inagaki, Shinji

    2016-07-01

    Heterogenization of metal-complex catalysts for water oxidation without loss of their catalytic activity is important for the development of devices simulating photosynthesis. In this study, efficient heterogeneous iridium complexes for water oxidation were prepared using bipyridine-bridged periodic mesoporous organosilica (BPy-PMO) as a solid chelating ligand. The BPy-PMO-based iridium catalysts (Ir-BPy-PMO) were prepared by postsynthetic metalation of BPy-PMO and characterized through physicochemical analyses. The Ir-BPy-PMOs showed high catalytic activity for water oxidation. The turnover frequency (TOF) values for Ir-BPy-PMOs were one order of magnitude higher than those of conventional heterogeneous iridium catalysts. The reusability and stability of Ir-BPy-PMO were also examined, and detailed characterization was conducted using powder X-ray diffraction, nitrogen adsorption, (13) C DD MAS NMR spectroscopy, TEM, and XAFS methods. PMID:27168492

  18. Periodic Mesoporous Organosilica Nanocubes with Ultrahigh Surface Areas for Efficient CO2 Adsorption

    NASA Astrophysics Data System (ADS)

    Wei, Yong; Li, Xiaomin; Zhang, Renyuan; Liu, Yong; Wang, Wenxing; Ling, Yun; El-Toni, Ahmed Mohamed; Zhao, Dongyuan

    2016-02-01

    Ultrahigh surface area single-crystals of periodic mesoporous organosilica (PMOs) with uniform cubic or truncated-cubic morphology and organic/inorganic components homogeneously distributed over the whole frameworks have successfully been prepared by a sol-gel surfactant-templating method. By tuning the porous feature and polymerization degree, the surface areas of the obtained PMO nanocubes can reach as high as 2370 m2/g, which is the highest for silica-based mesoporous materials. The ultrahigh surface area of the obtained PMO single crystals is mainly resulted from abundant micropores in the mesoporous frameworks. Furthermore, the diameter of the nanocubes can also be well controlled from 150 to 600 nm. The materials show ultrahigh CO2 adsorption capacity (up to 1.42 mmol/g at 273 K) which is much higher than other porous silica materials and comparable to some carbonaceous materials. The adsorption of CO2 into the PMO nanocubes is mainly in physical interaction, therefore the adsorption-desorption process is highly reversible and the adsorption capacity is much dependent on the surface area of the materials. Moreover, the selectivity is also very high (~11 times to N2) towards CO2 adsorption.

  19. Magnetic spherical cores partly coated with periodic mesoporous organosilica single crystals

    NASA Astrophysics Data System (ADS)

    Li, Jing; Wei, Yong; Li, Wei; Deng, Yonghui; Zhao, Dongyuan

    2012-02-01

    Core-shell structured materials are of special significance in various applications. Until now, most reported core-shell structures have polycrystalline or amorphous coatings as their shell layers, with popular morphologies of microspheres or quasi-spheres. However, the single crystals, either mesoscale or atomic ones, are still rarely reported as shell layers. If single crystals can be coated on core materials, it would result in a range of new type core-shell structures with various morphologies, and probably more potential applications. In this work, we demonstrate that periodic mesoporous organosilica (PMO) single crystals can partly grow on magnetic microspheres to form incomplete Fe3O4@nSiO2@PMO core-shell materials in aqueous solution, which indeed is the first illustration that mesoporous single-crystal materials can be used as shell layers for preparation of core-shell materials. The achieved materials have advantages of high specific surface areas, good magnetic responses, embedded functional groups and cubic mesopore channels, which might provide them with various application conveniences. We suppose the partial growth is largely decided by the competition between growing tendency of single crystals and the resistances to this tendency. In principle, other single crystals, including a range of atomic single crystals, such as zeolites, are able to be developed into such core-shell structures.

  20. Periodic Mesoporous Organosilica Nanocubes with Ultrahigh Surface Areas for Efficient CO2 Adsorption

    PubMed Central

    Wei, Yong; Li, Xiaomin; Zhang, Renyuan; Liu, Yong; Wang, Wenxing; Ling, Yun; El-Toni, Ahmed Mohamed; Zhao, Dongyuan

    2016-01-01

    Ultrahigh surface area single-crystals of periodic mesoporous organosilica (PMOs) with uniform cubic or truncated-cubic morphology and organic/inorganic components homogeneously distributed over the whole frameworks have successfully been prepared by a sol-gel surfactant-templating method. By tuning the porous feature and polymerization degree, the surface areas of the obtained PMO nanocubes can reach as high as 2370 m2/g, which is the highest for silica-based mesoporous materials. The ultrahigh surface area of the obtained PMO single crystals is mainly resulted from abundant micropores in the mesoporous frameworks. Furthermore, the diameter of the nanocubes can also be well controlled from 150 to 600 nm. The materials show ultrahigh CO2 adsorption capacity (up to 1.42 mmol/g at 273 K) which is much higher than other porous silica materials and comparable to some carbonaceous materials. The adsorption of CO2 into the PMO nanocubes is mainly in physical interaction, therefore the adsorption-desorption process is highly reversible and the adsorption capacity is much dependent on the surface area of the materials. Moreover, the selectivity is also very high (~11 times to N2) towards CO2 adsorption. PMID:26868049

  1. Periodic Mesoporous Organosilica Nanocubes with Ultrahigh Surface Areas for Efficient CO₂ Adsorption.

    PubMed

    Wei, Yong; Li, Xiaomin; Zhang, Renyuan; Liu, Yong; Wang, Wenxing; Ling, Yun; El-Toni, Ahmed Mohamed; Zhao, Dongyuan

    2016-01-01

    Ultrahigh surface area single-crystals of periodic mesoporous organosilica (PMOs) with uniform cubic or truncated-cubic morphology and organic/inorganic components homogeneously distributed over the whole frameworks have successfully been prepared by a sol-gel surfactant-templating method. By tuning the porous feature and polymerization degree, the surface areas of the obtained PMO nanocubes can reach as high as 2370 m(2)/g, which is the highest for silica-based mesoporous materials. The ultrahigh surface area of the obtained PMO single crystals is mainly resulted from abundant micropores in the mesoporous frameworks. Furthermore, the diameter of the nanocubes can also be well controlled from 150 to 600 nm. The materials show ultrahigh CO2 adsorption capacity (up to 1.42 mmol/g at 273 K) which is much higher than other porous silica materials and comparable to some carbonaceous materials. The adsorption of CO2 into the PMO nanocubes is mainly in physical interaction, therefore the adsorption-desorption process is highly reversible and the adsorption capacity is much dependent on the surface area of the materials. Moreover, the selectivity is also very high (~11 times to N2) towards CO2 adsorption. PMID:26868049

  2. Mesostructured TiO2 Gated Periodic Mesoporous Organosilica-Based Nanotablets for Multistimuli-responsive Drug Release.

    PubMed

    Wang, Tao; Guan, Buyuan; Wang, Xue; Li, Xiang; Zhang, Ye; Qiao, Zhen-An; Liu, Yunling; Huo, Qisheng

    2015-11-25

    A multistimuli-responsive drug carrier is designed and successfully synthesized by self-assembly of thiol-modified periodic mesoporous organosilica (PMO) nanoparticles, coated gold nanoparticles (AuNPs), and mesostructured titanium dioxide (TiO2). Dye-loaded PMO-Au@TiO2 nanotablets are shown to respond to environmental changes (pH, temperature, and light) to achieve controlled release. PMID:26418053

  3. Facile Synthesis of Yolk-Shell-Structured Triple-Hybridized Periodic Mesoporous Organosilica Nanoparticles for Biomedicine.

    PubMed

    Teng, Zhaogang; Zhang, Junjie; Li, Wei; Zheng, Yuanyi; Su, Xiaodan; Tang, Yuxia; Dang, Meng; Tian, Ying; Yuwen, Lihui; Weng, Lixing; Lu, Guangming; Wang, Lianhui

    2016-07-01

    The synthesis of mesoporous nanoparticles with controllable structure and organic groups is important for their applications. In this work, yolk-shell-structured periodic mesoporous organosilica (PMO) nanoparticles simultaneously incorporated with ethane-, thioether-, and benzene-bridged moieties are successfully synthesized. The preparation of the triple-hybridized PMOs is via a cetyltrimethylammonium bromide-directed sol-gel process using mixed bridged silsesquioxanes as precursors and a following hydrothermal treatment. The yolk-shell-structured triple-hybridized PMO nanoparticles have large surface area (320 m(2) g(-1) ), ordered mesochannels (2.5 nm), large pore volume (0.59 cm(3) g(-1) ), uniform and controllable diameter (88-380 nm), core size (22-110 nm), and shell thickness (13-45 nm). In vitro cytotoxicity, hemolysis assay, and histological studies demonstrate that the yolk-shell-structured triple-hybridized PMO nanoparticles have excellent biocompatibility. Moreover, the organic groups in the triple-hybridized PMOs endow them with an ability for covalent connection of near-infrared fluorescence dyes, a high hydrophobic drug loading capacity, and a glutathione-responsive drug release property, which make them promising candidates for applications in bioimaging and drug delivery. PMID:27183872

  4. Iridium-bipyridine periodic mesoporous organosilica catalyzed direct C-H borylation using a pinacolborane.

    PubMed

    Maegawa, Yoshifumi; Inagaki, Shinji

    2015-08-01

    Heterogeneous catalysis for direct C-H borylation of arenes and heteroarenes in the combination of iridium (Ir) complex fixed on periodic mesoporous organosilica containing bipyridine ligands within the framework (Ir-BPy-PMO) and pinacolborane (HBpin) is reported. Ir-BPy-PMO showed higher catalytic activity toward the borylation of benzene with inexpensive HBpin compared to expensive bis(pinacolato)diboron (B2pin2). The precatalyst could be handled without the use of a glove box. The catalyst was easily recovered from reaction mixtures by simple filtration under air. The recovered catalyst still showed good catalytic activity for at least three more times for the borylation of benzene. A variety of arenes and heteroarenes were successfully borylated with high boron efficiency by Ir-BPy-PMO using HBpin, whereas almost no activity was observed for borylation of some heteroarenes with B2pin2. The system using Ir-BPy-PMO and HBpin was also utilized in syntheses of multi-boronated thiophene-based building blocks containing ladder-, acenefused-, and fused-thiophene skeletons. The combination of a stable and reusable solid catalyst and inexpensive HBpin is expected to be superior to conventional approaches for the development of industrial applications. PMID:25748945

  5. Light-harvesting three-chromophore systems based on biphenyl-bridged periodic mesoporous organosilica.

    PubMed

    Grösch, Lyubov; Lee, Young Joo; Hoffmann, Frank; Fröba, Michael

    2015-01-01

    Three-chromophore systems with light-harvesting behavior were prepared, which are based on periodic mesoporous organosilica (PMO) with crystal-like ordered structure. The organic bridges of biphenyl-PMO in the pore walls act as donors and two types of dye are incorporated in the one-dimensional channels. Consecutive two-step-Förster resonance energy transfer is observed from the biphenyl moieties to mediators (diethyl-aminocoumarin or aminoacridone), followed by energy transfer from mediators to acceptors (dibenzothiacarbocyanine, indodicarbocyanine, sulforhodamine G). High energy-transfer efficiencies ranging from 70 to 80 % are obtained for two-step-FRET, indicating that the mesochannel structure with one-dimensional ordering provides spatial arrangement of chromophore pairs for an efficient direct energy transfer. The emission wavelength can be tuned by a choice of acceptor dye: 477 nm (diethylaminocoumarin), 519 nm (aminoacridone), 567 nm (sulforhodamine G), 630 nm (dibenzothiacarbocyanine), and 692 nm (indodicarbocyanine). PMID:25352478

  6. Enantiomorphous Periodic Mesoporous Organosilica-Based Nanocomposite Hydrogel Scaffolds for Cell Adhesion and Cell Enrichment.

    PubMed

    Kehr, Nermin Seda

    2016-03-14

    The chemical functionalization of nanomaterials with bioactive molecules has been used as an effective tool to mimic extracellular matrix (ECM) and to study the cell-material interaction in tissue engineering applications. In this respect, this study demonstrates the use of enantiomerically functionalized periodic mesoporous organosilicas (PMO) for the generation of new multifunctional 3D nanocomposite (NC) hydrogels to control the affinity of cells to the hydrogel surfaces and so to control the enrichment of cells and simultaneous drug delivery in 3D network. The functionalization of PMO with enantiomers of bioactive molecules, preparation of their nanocomposite hydrogels, and the stereoselective interaction of them with selected cell types are described. The results show that the affinity of cells to the respective NC hydrogel scaffolds is affected by the nature of the biomolecule and its enantiomers, which is more pronounced in serum containing media. The differentiation of enantiomorphous NC hydrogels by cells is used to enrich one cell type from a mixture of two cells. Finally, PMO are utilized as nanocontainers to release two different dye molecules as a proof of principle for multidrug delivery in 3D NC hydrogel scaffolds. PMID:26811946

  7. A zinc phthalocyanine based periodic mesoporous organosilica exhibiting charge transfer to fullerenes.

    PubMed

    Auras, Florian; Li, Yan; Löbermann, Florian; Döblinger, Markus; Schuster, Jörg; Peter, Laurence M; Trauner, Dirk; Bein, Thomas

    2014-11-10

    Periodic mesoporous organosilica (PMO) materials offer a strategy to position molecular semiconductors within a highly defined, porous network. We developed thin films of a new semiconducting zinc phthalocyanine-bridged PMO exhibiting a face-centered orthorhombic pore structure with an average pore diameter of 11 nm. The exceptional degree of order achieved with this PMO enabled us to create thin films consisting of a single porous domain throughout their entire thickness, thus providing maximal accessibility for subsequent incorporation of a complementary phase. The phthalocyanine building blocks inside the pore walls were found to be well-aggregated, enabling electronic conductivity and extending the light-harvesting capabilities to the near IR region. Ordered 3D heterojunctions capable of promoting photo-induced charge transfer were constructed by impregnation of the PMO with a fullerene derivative. When integrated into a photovoltaic device, the infiltrated PMO is capable of producing a high open-circuit voltage and a considerable photocurrent, which represents a significant step towards potential applications of PMOs in optoelectronics. PMID:25293365

  8. Clickable Periodic Mesoporous Organosilica Monolith for Highly Efficient Capillary Chromatographic Separation.

    PubMed

    Wu, Ci; Liang, Yu; Yang, Kaiguang; Min, Yi; Liang, Zhen; Zhang, Lihua; Zhang, Yukui

    2016-02-01

    A novel clickable periodic mesoporous organosilica monolith with the surface area up to 1707 m(2) g(-1) was in situ synthesized in the capillary by the one-step condensation of the organobridged-bonded alkoxysilane precursor bis(triethoxysilyl)ethylene. With Si-C bonds in the skeleton, the monolith possesses excellent chemical and mechanical stability. With vinyl groups highly loaded and homogeneously distributed throughout the structure, the monolith can be readily functionalized with functional groups by effective thiol-ene "click" chemistry reaction. Herein, with "click" modification of C18, the obtained monolith was successfully applied for capillary liquid chromatographic separation of small molecules and proteins. The column efficiency could reach 148,000 N/m, higher than most reported hybrid monoliths. Moreover, intact proteins could be separated well with good reproducibility, even after the monolithic column was exposed by basic mobile phase (pH 10.0) overnight, demonstrating the great promising of such monolith for capillary chromatographic separation. PMID:26751092

  9. Synthesis of Coesite Nanocrystals from Periodic Mesoporous Organosilicas (PMOs) at High Pressure and Temperature

    NASA Astrophysics Data System (ADS)

    Liang, Z.; Fei, Y.; Landskron, K.

    2009-12-01

    Experiments were performed to synthesize coesite nanocrystals under high P-T conditions using a multi-anvil apparatus. Periodic mesoporous organosilicas (PMOs) with ethylene (CH2CH2) groups (Et-PMO) and methylene (CH2) groups (Me-PMO) were chosen as the starting materials. Each type of the PMOs were heated to 150 °C, 300 °C, 450°C, and 600°C at the pressure of 12 GPa in the multi-anvil apparatus. Each sample was then quenched after holding at its final temperature for 15 minutes. Wide-angle x-ray diffraction (WAXD) patterns showed that the crystallization began to occur at 300 °C for both Et-PMO and Me-PMO. Silica in the coesite phase was obtained as the final product for either PMO in the experiments at 300 °C, 450°C, and 600°C while the products of experiments at 150°C remained as amorphous silica. Scanning electron microscopy (SEM) revealed nanocrystals as the morphology for both the Et-PMO and Me-PMO that were treated at 300 °C. Crystal growth was observed as the temperature increased for either type of PMO. Coesite nanocrystals with rod-like morphology were also found in the sample obtained from Et-PMO quenched from 600 °C. The formation of coesite at 12 GPa indicates a kinetically controlled crystallization of silica due to the mesoporous nature of PMOs and the mild synthesis temperatures. The different crystal morphologies observed for the coesite obtained from Et-PMO and Me-PMO treated under the same P-T condition show that the presence of various organic functional groups in PMO could affect the crystallization process. Coesite nanocrystals with sizes of 100 - 200 nm were synthesized from Me-PMO under 12 GPa at 300 °C in the multi-anvil apparatus.

  10. Smart Cancer Cell Targeting Imaging and Drug Delivery System by Systematically Engineering Periodic Mesoporous Organosilica Nanoparticles.

    PubMed

    Lu, Nan; Tian, Ying; Tian, Wei; Huang, Peng; Liu, Ying; Tang, Yuxia; Wang, Chunyan; Wang, Shouju; Su, Yunyan; Zhang, Yunlei; Pan, Jing; Teng, Zhaogang; Lu, Guangming

    2016-02-10

    The integration of diagnosis and therapy into one nanoplatform, known as theranostics, has attracted increasing attention in the biomedical areas. Herein, we first present a cancer cell targeting imaging and drug delivery system based on engineered thioether-bridged periodic mesoporous organosilica nanoparticles (PMOs). The PMOs are stably and selectively conjugated with near-infrared fluorescence (NIRF) dye Cyanine 5.5 (Cy5.5) and anti-Her2 affibody on the outer surfaces to endow them with excellent NIRF imaging and cancer targeting properties. Also, taking the advantage of the thioether-group-incorporated mesopores, the release of chemotherapy drug doxorubicin (DOX) loaded in the PMOs is responsive to the tumor-related molecule glutathione (GSH). The drug release percentage reaches 84.8% in 10 mM of GSH solution within 24 h, which is more than 2-fold higher than that without GSH. In addition, the drug release also exhibits pH-responsive, which reaches 53.6% at pH 5 and 31.7% at pH 7.4 within 24 h. Confocal laser scanning microscopy and flow cytometry analysis demonstrate that the PMOs-based theranostic platforms can efficiently target to and enter Her2 positive tumor cells. Thus, the smart imaging and drug delivery nanoplatforms induce high tumor cell growth inhibition. Meanwhile, the Cy5.5 conjugated PMOs perform great NIRF imaging ability, which could monitor the intracellular distribution, delivery and release of the chemotherapy drug. In addition, cell viability and histological assessments show the engineered PMOs have good biocompatibility, further encouraging the following biomedical applications. Over all, the systemically engineered PMOs can serve as a novel cancer cell targeting imaging and drug delivery platform with NIRF imaging, GSH and pH dual-responsive drug release, and high tumor cell targeting ability. PMID:26767305

  11. A Facile Multi-interface Transformation Approach to Monodisperse Multiple-Shelled Periodic Mesoporous Organosilica Hollow Spheres.

    PubMed

    Teng, Zhaogang; Su, Xiaodan; Zheng, Yuanyi; Zhang, Junjie; Liu, Ying; Wang, Shouju; Wu, Jiang; Chen, Guotao; Wang, Jiandong; Zhao, Dongyuan; Lu, Guangming

    2015-06-24

    The synthesis of well-defined and complex hollow structures via a simple method is still a major challenge. In this work, a facile and controllable "multi-interface transformation" approach for preparation of monodisperse multi-shelled periodic mesoporous organosilica (PMO) hollow spheres has been established by a one-step hydrothermal treatment of successively grown organosilica particles. The multi-shelled PMO hollow spheres have inorganic-organic hybrid frameworks, controllable number (1-4) of shells, high surface area (∼805 m(2)/g), accessible ordered mesochannels (∼3.2 nm), large pore volume (1.0 cm(3)/g), and uniform and tunable diameter (300-550 nm), chamber size (4-54 nm), and shell thickness (10-30 nm). In addition, various organic groups (alkyl, aromatic, and heteroelement fragments) are successfully incorporated into the multi-shelled PMO hollow spheres by successively adding different bridged organosilica precursors. Notably, the distribution of different kinds of organic groups in the multi-shelled PMO hollow spheres can be precisely controlled, showing great potential for future applications. We propose that the formation of the multi-shelled PMO hollow structures is ascribed to the creation of multiple highly cross-linked organosilica interfaces, providing a new and interesting fundamental principle for PMO materials. Due to their unique structure and frameworks, triple-shelled ethane-bridged PMO hollow spheres were successfully loaded with an anti-cancer drug doxorubicin and perfluoropentane gas, which present excellent effects in the killing of cancer cells and ultrasound imaging. It is expected that the multi-interface transformation strategy provides a simple, controllable, versatile, and template-free method for preparation of various multifunctional PMOs for different applications. PMID:26030506

  12. Heterocyclic tri-urea isocyanurate bridged groups modified periodic mesoporous organosilica synthesized for Fe(III) adsorption

    NASA Astrophysics Data System (ADS)

    Rana, Vijay Kumar; Selvaraj, M.; Parambadath, Surendran; Chu, Sang-Wook; Park, Sung Soo; Mishra, Satyendra; Singh, Raj Pal; Ha, Chang-Sik

    2012-10-01

    To achieve a high level of heavy metal adsorption, 1,1',1″-(1,3,5-triazine-2,4,6-triyl)tris(3-(3-(triethoxysilyl)propyl)urea) (TTPU) was synthesized as a novel melamine precursor and incorporated on the silica surface of periodic mesoporous organosilica (PMO). The melamine modified PMOs (MPMOs) were synthesized under acidic conditions using TTPU, tetraethylorthosilicate (TEOS) and Pluronic P123 as a template and the modified PMOs were characterized using the relevant instrumental techniques. The characteristic materials were used as adsorbents for the adsorption of Fe(III) ions. Fe(III) adsorption studies revealed MPMO-7.5 to be a good absorbent with higher adsorption efficiency than other MPMOs.

  13. Effect of carboxylic acid of periodic mesoporous organosilicas on the fructose-to-5-hydroxymethylfurfural conversion in dimethylsulfoxide systems

    NASA Astrophysics Data System (ADS)

    Dutta, Saikat; Kao, Hsien-Ming; Wu, Kevin C.-W.

    2014-11-01

    This manuscript presents the preparation and catalytic application of highly ordered benzene bridged periodic mesoporous organosilicas (PMOs) functionalized with carboxylic acid (-COOH) group at varied density. The COOH-functionalized PMOs were synthesized by one-step condensation of 1,4-bis (triethoxysilyl) benzene and carboxylic group containing organosilane carboxyethylsilanetriol sodium salt using Brij-76 as the template. The obtained materials were characterized by a mean of methods including powder X-ray diffraction, nitrogen adsorption-desorption, scanning- and transmission electron microscopy, and 13C solid-state nuclear magnetic resonance measurements. The potentials of the obtained PMO materials with ordered mesopores were examined as solid catalysts for the chemical conversion of fructose to 5-hydroxymethylfurfural (HMF) in an organic solvent. The results showed that COOH-functionalized PMO with 10% COOH loading exhibited best results for the fructose to HMF conversion and selectivity. The high surface area, the adequate density acid functional group, and the strength of the PMO materials contributing to a promising catalytic ability were observed.

  14. Effect of carboxylic acid of periodic mesoporous organosilicas on the fructose-to-5-hydroxymethylfurfural conversion in dimethylsulfoxide systems

    SciTech Connect

    Dutta, Saikat; Wu, Kevin C.-W. E-mail: kevinwu@ntu.edu.tw; Kao, Hsien-Ming E-mail: kevinwu@ntu.edu.tw

    2014-11-01

    This manuscript presents the preparation and catalytic application of highly ordered benzene bridged periodic mesoporous organosilicas (PMOs) functionalized with carboxylic acid (–COOH) group at varied density. The COOH-functionalized PMOs were synthesized by one-step condensation of 1,4-bis (triethoxysilyl) benzene and carboxylic group containing organosilane carboxyethylsilanetriol sodium salt using Brij-76 as the template. The obtained materials were characterized by a mean of methods including powder X-ray diffraction, nitrogen adsorption-desorption, scanning- and transmission electron microscopy, and {sup 13}C solid-state nuclear magnetic resonance measurements. The potentials of the obtained PMO materials with ordered mesopores were examined as solid catalysts for the chemical conversion of fructose to 5-hydroxymethylfurfural (HMF) in an organic solvent. The results showed that COOH-functionalized PMO with 10% COOH loading exhibited best results for the fructose to HMF conversion and selectivity. The high surface area, the adequate density acid functional group, and the strength of the PMO materials contributing to a promising catalytic ability were observed.

  15. Periodic Mesoporous Organosilica Nanoparticles with Controlled Morphologies and High Drug/Dye Loadings for Multicargo Delivery in Cancer Cells.

    PubMed

    Croissant, Jonas G; Fatieiev, Yevhen; Omar, Haneen; Anjum, Dalaver H; Gurinov, Andrey; Lu, Jie; Tamanoi, Fuyuhiko; Zink, Jeffrey I; Khashab, Niveen M

    2016-07-01

    Despite the worldwide interest generated by periodic mesoporous organosilica (PMO) bulk materials, the design of PMO nanomaterials with controlled morphology remains largely unexplored and their properties unknown. In this work, we describe the first study of PMO nanoparticles (NPs) based on meta-phenylene bridges, and we conducted a comparative structure-property relationship investigation with para-phenylene-bridged PMO NPs. Our findings indicate that the change of the isomer drastically affects the structure, morphology, size, porosity and thermal stability of PMO materials. We observed a much higher porosity and thermal stability of the para-based PMO which was likely due to a higher molecular periodicity. Additionally, the para isomer could generate multipodal NPs at very low stirring speed and upon this discovery we designed a phenylene-ethylene bridged PMO with a controlled Janus morphology. Unprecedentedly high payloads could be obtained from 40 to 110 wt % regardless of the organic bridge of PMOs. Finally, we demonstrate for the first time the co-delivery of two cargos by PMO NPs. Importantly, the cargo stability in PMOs did not require the capping of the pores, unlike pure silica, and the delivery could be autonomously triggered in cancer cells by acidic pH with nearly 70 % cell killing. PMID:27245497

  16. Probing framework-guest interactions in phenylene-bridged periodic mesoporous organosilica using spin-probe EPR.

    PubMed

    Lin, Feng; Meng, Xiangyan; Mertens, Myrjam; Cool, Pegie; Van Doorslaer, Sabine

    2014-11-01

    The pore walls of phenylene-bridged periodic mesoporous organosilicas (B-PMOs) can be crystal-like or amorphous depending on the synthesis conditions. Here, spin-probe electron paramagnetic resonance (EPR) is used to monitor the adsorption of nitroxide radicals on three types of B-PMO with varying pore size and wall characteristics. Nitroxide radicals with varying polarity are chosen as probes to mimic guest molecules with different properties. The study shows that the B-PMO materials with amorphous walls allow an overall better adsorption of the spin probes than the one with crystalline walls, independent of the nature of the spin probe. The effect of hydration of the guest-host system on the mobility of the spin probe molecule depends more on the nature of the spin probe than on the B-PMO material. Comparison of the spin-probe adsorption on B-PMOs and ethylene-bridged PMO materials shows the sensitivity of the mobility of the guest molecule to the nature of the organic group. PMID:25231242

  17. Pickering emulsion stabilized by lipase-containing periodic mesoporous organosilica particles: a robust biocatalyst system for biodiesel production.

    PubMed

    Jiang, Yanjun; Liu, Xinlong; Chen, Yafei; Zhou, Liya; He, Ying; Ma, Li; Gao, Jing

    2014-02-01

    A novel catalytic system of Pickering emulsion stabilized by lipase-containing periodic mesoporous organosilica was constructed (named LP@PE) and used as biocatalyst for biodiesel production. The reaction parameters were optimized and the optimum conditions were as follows: the water fraction 0.65%, molar ratio of ethanol to oleic acid 2:1, immobilized lipase particles 150mg, phosphate buffer pH 7.0 and temperature 30°C. Under these conditions, the maximum biodiesel yield obtained via esterification of oleic acid with ethanol could reach 95.8%. The biodiesel yield could maintain 88.6% after LP@PE was used 15times. The LP@PE was also used in the synthesis of biodiesel from Jatropha curcas oil. The highest yield could reach 87.1% and the yield was 73.0% after 10 cycles. All these results demonstrated that Pickering emulsion system stabilized by immobilized enzyme may possess much potential in many enzymatic industrial applications. PMID:24368276

  18. Synthesis of highly phosphonic acid functionalized benzene-bridged periodic mesoporous organosilicas for use as efficient dye adsorbents.

    PubMed

    Deka, Juti Rani; Liu, Chia-Ling; Wang, Tzu-Hua; Chang, Wei-Chieh; Kao, Hsien-Ming

    2014-08-15

    Periodic mesoporous organosilicas (PMOs) with benzene bridging groups in the silica wall were functionalized with a tunable content of phosphonic acid groups. These bifunctional materials were synthesized by co-condensation of two different organosilane precursors, that is, 1,4-bis(triethoxysilyl)benzene (BTEB) and sodium 3-(trihydroxysilyl)propyl methyl phosphate (SPMP), under acidic conditions using nonionic surfactant Brij-S10 as template. The materials exhibited well-ordered mesostructures and were characterized by X-ray diffraction, nitrogen sorption, TEM, TGA, FTIR, and solid-state NMR measurements. The materials thus obtained were employed as adsorbents to remove different types of dyes, for example, cationic dyes methylene blue and phenosafranine, anionic orange II, and amphoteric rhodamine B, from aqueous solutions. The materials exhibited a remarkably high adsorption capacity than activated carbon due to their ordered mesostructures, a large number of phosphonic acid groups, and high surface areas. The adsorption was mainly governed by electrostatic interaction, but also involved π-π stacking interaction as well as hydrogen bonding. The adsorption kinetics can be better fitted by the pseudo-second order model. The adsorption process was controlled by the mechanisms of external mass transfer and intraparticle diffusion. The materials retained more than 97% dye removal efficiency after use for five consecutive cycles. PMID:25010459

  19. Synthesis and properties of 1,3,5-benzene periodic mesoporous organosilica (PMO): novel aromatic PMO with three point attachments and unique thermal transformations.

    PubMed

    Kuroki, Masakatsu; Asefa, Tewodros; Whitnal, Wesley; Kruk, Michal; Yoshina-Ishii, Chiaki; Jaroniec, Mietek; Ozin, Geoffrey A

    2002-11-20

    A new aromatic periodic mesoporous organosilica material containing benzene functional groups that are symmetrically integrated with three silicon atoms in an organosilica mesoporous framework is reported. The material has a high surface area, well-ordered mesoporous structure and thermally stable framework aromatic groups. The functional aromatic moieties were observed to undergo sequential thermal transformation from a three to two and then to a one point attachment within the framework upon continuous thermolysis under air before eventually being converted to periodic mesoporous silica devoid of aromatic groups at high temperatures and longer pyrolysis times. The mesoporosity of the material was characterized by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and nitrogen porosimetry, whereas the presence and transformation of the aromatic groups in the walls of the materials were characterized by solid-state NMR spectroscopy, mass spectrometry, and thermogravimetric analysis. The attachment of a benzene ring symmetrically onto three siloxanes of the framework was used advantageously as a cross-linker to enhance the thermal stability of the organic group. Some of these properties are investigated in comparison with other aromatic PMOs that have only two point attachments and an amorphous phenylsilica gel that has only one point attachment. The successful synthesis of the first aromatic PMO with its organic group attached within the framework through more than two points is an important step toward the synthesis of PMOs having organic groups with more complex and multiple attachments within the framework. PMID:12431120

  20. Near-IR squaraine dye-loaded gated periodic mesoporous organosilica for photo-oxidation of phenol in a continuous-flow device.

    PubMed

    Borah, Parijat; Sreejith, Sivaramapanicker; Anees, Palapuravan; Menon, Nishanth Venugopal; Kang, Yuejun; Ajayaghosh, Ayyappanpillai; Zhao, Yanli

    2015-09-01

    Periodic mesoporous organosilica (PMO) has been widely used for the fabrication of a variety of catalytically active materials. We report the preparation of novel photo-responsive PMO with azobenzene-gated pores. Upon activation, the azobenzene gate undergoes trans-cis isomerization, which allows an unsymmetrical near-infrared squaraine dye (Sq) to enter into the pores. The gate closure by cis-trans isomerization of the azobenzene unit leads to the safe loading of the monomeric dye inside the pores. The dye-loaded and azobenzene-gated PMO (Sq-azo@PMO) exhibits excellent generation of reactive oxygen species upon excitation at 664 nm, which can be effectively used for the oxidation of phenol into benzoquinone in aqueous solution. Furthermore, Sq-azo@PMO as the catalyst was placed inside a custom-built, continuous-flow device to carry out the photo-oxidation of phenol to benzoquinone in the presence of 664-nm light. By using the device, about 23% production of benzoquinone with 100% selectivity was achieved. The current research presents a prototype of transforming heterogeneous catalysts toward practical use. PMID:26601266

  1. Near-IR squaraine dye–loaded gated periodic mesoporous organosilica for photo-oxidation of phenol in a continuous-flow device

    PubMed Central

    Borah, Parijat; Sreejith, Sivaramapanicker; Anees, Palapuravan; Menon, Nishanth Venugopal; Kang, Yuejun; Ajayaghosh, Ayyappanpillai; Zhao, Yanli

    2015-01-01

    Periodic mesoporous organosilica (PMO) has been widely used for the fabrication of a variety of catalytically active materials. We report the preparation of novel photo-responsive PMO with azobenzene-gated pores. Upon activation, the azobenzene gate undergoes trans-cis isomerization, which allows an unsymmetrical near-infrared squaraine dye (Sq) to enter into the pores. The gate closure by cis-trans isomerization of the azobenzene unit leads to the safe loading of the monomeric dye inside the pores. The dye-loaded and azobenzene-gated PMO (Sq-azo@PMO) exhibits excellent generation of reactive oxygen species upon excitation at 664 nm, which can be effectively used for the oxidation of phenol into benzoquinone in aqueous solution. Furthermore, Sq-azo@PMO as the catalyst was placed inside a custom-built, continuous-flow device to carry out the photo-oxidation of phenol to benzoquinone in the presence of 664-nm light. By using the device, about 23% production of benzoquinone with 100% selectivity was achieved. The current research presents a prototype of transforming heterogeneous catalysts toward practical use. PMID:26601266

  2. Dipolar rotors orderly aligned in mesoporous fluorinated organosilica architectures.

    PubMed

    Bracco, Silvia; Beretta, Mario; Cattaneo, Alice; Comotti, Angiolina; Falqui, Andrea; Zhao, Ke; Rogers, Charles; Sozzani, Piero

    2015-04-13

    New mesoporous covalent frameworks, based on hybrid fluorinated organosilicas, were prepared to realize a periodic architecture of fast molecular rotors containing dynamic dipoles in their structure. The mobile elements, designed on the basis of fluorinated p-divinylbenzene moieties, were integrated into the robust covalent structure through siloxane bonds, and showed not only the rapid dynamics of the aromatic rings (ca. 10(8) Hz at 325 K), as detected by solid-state NMR spectroscopy, but also a dielectric response typical of a fast dipole reorientation under the stimuli of an applied electric field. Furthermore, the mesochannels are open and accessible to diffusing in gas molecules, and rotor mobility could be individually regulated by I2 vapors. The iodine enters the channels of the periodic structure and reacts with the pivotal double bonds of the divinyl-fluoro-phenylene rotors, affecting their motion and the dielectric properties. PMID:25689486

  3. A metal-ion-assisted assembly approach to synthesize disulfide-bridged periodical mesoporous organosilicas with high sulfide contents and efficient adsorption

    NASA Astrophysics Data System (ADS)

    Hao, Na; Han, Lu; Yang, Yunxia; Wang, Huanting; Webley, Paul A.; Zhao, Dongyuan

    2010-06-01

    Well-ordered two-dimensional (2D) hexagonal periodic mesoporous organosilicas (PMOs) with a high content of disulfide groups have been prepared by a simple metal-ions-assisted amphiphilic surfactant templating process under a strong acidic condition. Long-chain organic bridge silane, bis(triethoxysilylpropyl)disulfide (BTSPDS) was used as a precursor which can be co-condensed with tetraethoxysilane (TEOS) to assemble with the triblock copolymer Pluronic P123 template and to construct the mesostructured organic-inorganic frameworks. The content of disulfide functional groups is up to 20% (BTSPDS molar content in the initial silane mixture) incorporated into the framework. The obtained ordered mesoporous DS-PMO materials have relatively high BET surface area (˜580 m 2/g), large uniform pore size (up to 6.3 nm) and thick pore walls (thickness up to 7.1 nm), because of the long-chain disulfide bridges. The metal ions such as Zn 2+ formed the four-coordination complex with two sulfides of BTSPDS and ethylene oxide moieties of P123 template, which could enhance the interaction between the "soft" long disulfide groups and P123 template, thus improving the mesostructural regularity correspondingly. The disulfide-bridged PMO materials exhibit excellent hydrothermal stability in boiling water for 5 days, probably due to the thick pore walls. SEM images show that after the hydrothermal treatment, the morphology of the ordered disulfide-bridged PMO materials is retained, as that of the wheat-like SBA-15. Excellent adsorption efficiency (˜716 mg/g) for Hg 2+ ions is observed, suggesting a potential application in removal of heavy metal ions in wastewater.

  4. Direct-synthesis method towards copper-containing periodic mesoporous organosilicas: detailed investigation of the copper distribution in the material.

    PubMed

    Lin, Feng; Meng, Xiangyan; Kukueva, Elena; Altantzis, Thomas; Mertens, Myrjam; Bals, Sara; Cool, Pegie; Van Doorslaer, Sabine

    2015-06-01

    Three-dimensional cubic Fm3[combining macron]m mesoporous copper-containing ethane-bridged PMO materials have been prepared through a direct-synthesis method at room temperature in the presence of cetyltrimethylammonium bromide as surfactant. The obtained materials have been unambiguously characterized in detail by several sophisticated techniques, including XRD, UV-Vis-Dr, TEM, elemental mapping, continuous-wave and pulsed EPR spectroscopy. The results show that at lower copper loading, the Cu(2+) species are well dispersed in the Cu-PMO materials, and mainly exist as mononuclear Cu(2+) species. At higher copper loading amount, Cu(2+) clusters are observed in the materials, but the distribution of the Cu(2+) species is still much better in the Cu-PMO materials prepared through the direct-synthesis method than in a Cu-containing PMO material prepared through an impregnation method. Moreover, the evolution of the copper incorporation during the PMO synthesis has been followed by EPR. The results show that the immobilization of the Cu(2+) ion/complex and the formation of the PMO materials are taking place simultaneously. The copper ions are found to be situated on the inner surface of the mesopores of the materials and are accessible, which will be beneficial for the catalytic applications. PMID:25945682

  5. Mesoporous hybrid organosilica containing urethane moieties

    SciTech Connect

    Seo, You-Kyong; Park, Sung-Bae; Ho Park, Dong . E-mail: chempdh@inje.ac.kr

    2006-04-15

    Mesoporous hybrid material containing urethane moieties in functionalized long chain organic group have been synthesized by using bis[3-(triethoxysilyl) propyl urethane]ethane (BTESPUE) and tetraethoxysilane as structural ingredients. The incorporation of BTESPUE within the framework of mesoporous material was confirmed by Fourier transform-infrared, X-ray photoelectron spectroscopy, solid-state NMR spectroscopy and thermogravimetric analysis. This material had a thick wall and uniform pore, which may be attributed to the hydrogen bonding inside framework due to urethane moieties.

  6. Organosilica: Chemistry of Mesoporous Organosilica in Nanotechnology: Molecularly Organic-Inorganic Hybridization into Frameworks (Adv. Mater. 17/2016).

    PubMed

    Chen, Yu; Shi, Jianlin

    2016-05-01

    Organic-inorganic hybrid materials can combine the advantages of organic and inorganic materials, and overcome their drawbacks accordingly. On page 3235, Y. Chen and J. L. Shi review and discuss research progress on the design, synthesis, structure, and composition control of organic-inorganic hybrid mesoporous organosilica nanoparticles (MONs). Extensive applications of MONs in nanotechnology, mainly in nanomedicine, nanocatalysis and nanofabrication are discussed. PMID:27122112

  7. A controllable asymmetrical/symmetrical coating strategy for architectural mesoporous organosilica nanostructures

    NASA Astrophysics Data System (ADS)

    Wang, Xue; He, Yapeng; Liu, Chong; Liu, Yunling; Qiao, Zhen-An; Huo, Qisheng

    2016-07-01

    We describe a facile and controllable asymmetrical/symmetrical coating strategy for the preparation of various novel periodic mesoporous organosilica (PMO) nanostructures, including Au&PMO Janus, Au@PMO yolk-shell and Au@PMO/mSiO2 yolk-double shell nanoparticles, by using Au@SiO2 nanoparticles as seeds. During this process, ammonia first functions as a basic catalyst facilitating the hydrolyzation and condensation of the organosilica precursor, and additionally as an etching agent selectively in situ dissolving the SiO2 shells of Au@SiO2 nanoparticles to form these unique nanostructures. All these three types of nanoparticles have high surface areas, large pore volumes and tailorable cavity structures. Both the Au&PMO and Au@PMO nanoparticles exhibit excellent catalytic activity for the decomposition of H2O2 and the reduction of 4-nitrophenol. Based on these unique structural merits and organic-inorganic hybrid components, the fabricated Janus and hollow PMO nanoparticles show much improved hemocompatibility, which could be further applied in nano-biomedicines without the need for surface modification.We describe a facile and controllable asymmetrical/symmetrical coating strategy for the preparation of various novel periodic mesoporous organosilica (PMO) nanostructures, including Au&PMO Janus, Au@PMO yolk-shell and Au@PMO/mSiO2 yolk-double shell nanoparticles, by using Au@SiO2 nanoparticles as seeds. During this process, ammonia first functions as a basic catalyst facilitating the hydrolyzation and condensation of the organosilica precursor, and additionally as an etching agent selectively in situ dissolving the SiO2 shells of Au@SiO2 nanoparticles to form these unique nanostructures. All these three types of nanoparticles have high surface areas, large pore volumes and tailorable cavity structures. Both the Au&PMO and Au@PMO nanoparticles exhibit excellent catalytic activity for the decomposition of H2O2 and the reduction of 4-nitrophenol. Based on these unique

  8. Efficient drug metabolism strategy based on microsome-mesoporous organosilica nanoreactors.

    PubMed

    Fang, Xiaoni; Zhang, Peng; Qiao, Liang; Feng, Xiaoyan; Zhang, Xiangmin; Girault, Hubert H; Liu, Baohong

    2014-11-01

    A rapid and accurate in vitro drug metabolism strategy has been proposed based on the design of a biomimetic nanoreactor composed of amino-functionalized periodic mesoporous organosilica (NH2-PMO) and microsomes. The amphiphilic nature and positive charge of NH2-PMO make it highly suited for the immobilization of hydrophobic and negatively charged microsomes to form nanoreactors, which can in turn extract substrates from solutions. Such nanoreactors provide a suitable environment to confine multiple enzymes and substrates with high local concentrations, as well as to maintain their catalytic activities for rapid and highly effective drug metabolic reactions. Coupled with high-performance liquid chromatography-mass spectrometry analysis, the metabolites of nifedipine and testosterone were quantitatively characterized, and the reaction kinetics was evaluated. Both the metabolism conversion and reaction rate were significantly improved with the NH2-PMO nanoreactors compared to bulk reactions. This strategy is simple and cost-effective for promising advances in biomimetic metabolism study. PMID:25313798

  9. Chemistry of Mesoporous Organosilica in Nanotechnology: Molecularly Organic-Inorganic Hybridization into Frameworks.

    PubMed

    Chen, Yu; Shi, Jianlin

    2016-05-01

    Organic-inorganic hybrid materials aiming to combine the individual advantages of organic and inorganic components while overcoming their intrinsic drawbacks have shown great potential for future applications in broad fields. In particular, the integration of functional organic fragments into the framework of mesoporous silica to fabricate mesoporous organosilica materials has attracted great attention in the scientific community for decades. The development of such mesoporous organosilica materials has shifted from bulk materials to nanosized mesoporous organosilica nanoparticles (designated as MONs, in comparison with traditional mesoporous silica nanoparticles (MSNs)) and corresponding applications in nanoscience and nanotechnology. In this comprehensive review, the state-of-art progress of this important hybrid nanomaterial family is summarized, focusing on the structure/composition-performance relationship of MONs of well-defined morphology, nanostructure, and nanoparticulate dimension. The synthetic strategies and the corresponding mechanisms for the design and construction of MONs with varied morphologies, compositions, nanostructures, and functionalities are overviewed initially. Then, the following part specifically concentrates on their broad spectrum of applications in nanotechnology, mainly in nanomedicine, nanocatalysis, and nanofabrication. Finally, some critical issues, presenting challenges and the future development of MONs regarding the rational synthesis and applications in nanotechnology are summarized and discussed. It is highly expected that such a unique molecularly organic-inorganic nanohybrid family will find practical applications in nanotechnology, and promote the advances of this discipline regarding hybrid chemistry and materials. PMID:26936391

  10. Aerosol-assisted synthesis of mesoporous organosilica microspheres with controlled organic contents

    NASA Astrophysics Data System (ADS)

    Yamauchi, Yusuke; Suzuki, Norihiro; Gupta, Prashant; Sato, Keisuke; Fukata, Naoki; Murakami, Miwa; Shimizu, Tadashi; Inoue, Satoru; Kimura, Tatsuo

    2009-04-01

    Periodic mesoporous organosilica (PMO) spherical particles with different organic contents were synthesized in one pot by reacting 1,2-bis(triethoxysilyl)ethane (BTSE) with tetraethylorthosilicate (TEOS) using a spray-drying technique. The scanning electron microscopy observation of spray-dried products clearly showed the formation of spherical particles. The 29Si magic angle spinning nuclear magnetic resonance data revealed that the organic contents due to ethane fragments embedded in the frameworks were controllable and consistent with the BTSE/TEOS molar ratios of precursor solutions. Transmission electron microscopy, small-angle x-ray scattering, and N2 adsorption data of PMO with controlled organic contents indicated that the ethane fragments were embedded in the frameworks with the formation of ordered mesostructures. PMO with a high organic content (BTSE/TEOS=0.50) only showed a hydrophobic property. According to the same procedure, benzene groups were also integrated to a similar degree in the frameworks by using 1,4-bis(triethoxysilyl)benzene.

  11. Mesoporous organosilica nanotubes containing a chelating ligand in their walls

    NASA Astrophysics Data System (ADS)

    Liu, Xiao; Goto, Yasutomo; Maegawa, Yoshifumi; Ohsuna, Tetsu; Inagaki, Shinji

    2014-11-01

    We report the synthesis of organosilica nanotubes containing 2,2'-bipyridine chelating ligands within their walls, employing a single-micelle-templating method. These nanotubes have an average pore diameter of 7.8 nm and lengths of several hundred nanometers. UV-vis absorption spectra and scanning transmission electron microscopy observations of immobilized nanotubes with an iridium complex on the bipyridine ligands showed that the 2,2'-bipyridine groups were homogeneously distributed in the benzene-silica walls. The iridium complex, thus, immobilized on the nanotubes exhibited efficient catalytic activity for water oxidation using Ce4+, due to the ready access of reactants to the active sites in the nanotubes.

  12. Mesoporous organosilica nanotubes containing a chelating ligand in their walls

    SciTech Connect

    Liu, Xiao; Goto, Yasutomo; Maegawa, Yoshifumi; Inagaki, Shinji

    2014-11-01

    We report the synthesis of organosilica nanotubes containing 2,2′-bipyridine chelating ligands within their walls, employing a single-micelle-templating method. These nanotubes have an average pore diameter of 7.8 nm and lengths of several hundred nanometers. UV-vis absorption spectra and scanning transmission electron microscopy observations of immobilized nanotubes with an iridium complex on the bipyridine ligands showed that the 2,2′-bipyridine groups were homogeneously distributed in the benzene-silica walls. The iridium complex, thus, immobilized on the nanotubes exhibited efficient catalytic activity for water oxidation using Ce{sup 4+}, due to the ready access of reactants to the active sites in the nanotubes.

  13. Large Pore-Sized Hollow Mesoporous Organosilica for Redox-Responsive Gene Delivery and Synergistic Cancer Chemotherapy.

    PubMed

    Wu, Meiying; Meng, Qingshuo; Chen, Yu; Zhang, Lingxia; Li, Mengli; Cai, Xiaojun; Li, Yaping; Yu, Pengcheng; Zhang, Linlin; Shi, Jianlin

    2016-03-01

    A stability-difference-selective bond-breakage strategy for the fabrication of largepore-sized hollow mesoporous organosilica nanoparticles (HMONs) is successfully developed. Moreover, surfacefunctionalized HMONs are successfully constructed to simultaneously deliver P-gp modulator siRNA and anticancer drug doxorubicin to reverse the multidrug resistance of cancer cells. PMID:26743228

  14. Mesoporous organosilicas functionalized by alkyl groups: Synthesis, structure and adsorption properties

    NASA Astrophysics Data System (ADS)

    Barczak, M.; Dąbrowski, A.; Iwan, M.; Rzączyńska, Z.

    2009-01-01

    Mesoporous organosilicas were synthesized by sol-gel co-condensation of tetraethoxysilane and appropriate alkoxysilanes in the presence of Pluronic P123 surfactant. Hexyl, dodecyl, and octadecyl alkyl chains have been incorporated into mesopores by such co-condensation. Obtained materials were characterized by X-ray diffraction, FTIR spectroscopy, nitrogen adsorption measurements and thermogravimetry. Two resulted materials have highly ordered SBA-15 structure (p6m symmetry), other two are less ordered. All the materials exhibit well-developed porous structure (surface areas 500 to 830m2/g, pore volumes 0.65-1.32 cm3/g) and a high content of organic pendant groups introduced during co-condensation. All materials are thermally stable to 180°C, after that thermal decomposition of alkyl pendant groups starts.

  15. Thermal switching of the reflection in chiral nematic mesoporous organosilica films infiltrated with liquid crystals.

    PubMed

    Giese, Michael; De Witt, Joanna C; Shopsowitz, Kevin E; Manning, Alan P; Dong, Ronald Y; Michal, Carl A; Hamad, Wadood Y; MacLachlan, Mark J

    2013-08-14

    Materials that undergo stimulus-induced optical changes are important for many new technologies. In this paper, we describe a new free-standing silica-based composite film that exhibits reversible thermochromic reflection, induced by a liquid crystalline guest in the pores of iridescent mesoporous films. We demonstrate that selective reflection from the novel mesoporous organosilica material with chiral nematic organization can be reversibly switched by thermal cycling of the 8CB guest between its isotropic and liquid crystalline states, which was proven by solid-state NMR experiments. The switching of the optical properties of the chiral solid-state host by stimulus-induced transitions of the guest opens the possibility of applications for these novel materials in sensors and displays. PMID:23859140

  16. A visible-light harvesting system for CO2 reduction using a Ru(II) -Re(I) photocatalyst adsorbed in mesoporous organosilica.

    PubMed

    Ueda, Yutaro; Takeda, Hiroyuki; Yui, Tatsuto; Koike, Kazuhide; Goto, Yasutomo; Inagaki, Shinji; Ishitani, Osamu

    2015-02-01

    A photocatalytic system for CO2 reduction exhibiting visible-light harvesting was developed by preparing a hybrid consisting of a supramolecular metal complex as photocatalyst and periodic mesoporous organosilica (PMO) as light harvester. A Ru(II) Re(I) binuclear complex (RuRe) with methylphosphonic acid anchor groups was adsorbed on acridone or methylacridone embedded in the walls of PMO mesochannels to yield the hybrid structure. The embedded organic groups absorbed visible light, and the excitation energy was funneled to the Ru units. The energy accumulation was followed by electron transfer and catalytic reduction of CO2 to CO on the Re unit. The light harvesting of these hybrids enhanced the photocatalytic CO evolution rate by a factor of up to ten compared with that of RuRe adsorbed on mesoporous silica without a light harvester. PMID:25524162

  17. CO₂ adsorption on amine-functionalized periodic mesoporous benzenesilicas.

    PubMed

    Sim, Kyohyun; Lee, Nakwon; Kim, Joonseok; Cho, Eun-Bum; Gunathilake, Chamila; Jaroniec, Mietek

    2015-04-01

    CO2 adsorption was investigated on amine-functionalized mesoporous silica (SBA-15) and periodic mesoporous organosilica (PMO) samples. Hexagonally (p6mm) ordered mesoporous SBA-15 and benzene-PMO (BPMO) samples were prepared in the presence of Pluronic P123 block copolymer template under acidic conditions. Three kinds of amine-containing organosilanes and polyethylenimine were used to functionalize SBA-15 and BPMO. Small-angle X-ray scattering and nitrogen adsorption isotherms showed that these samples featured ordered mesostructure, high surface area, and narrow pore size distributions. Solid-state (13)C- and (29)Si cross-polarization magic-angle spinning NMR spectra showed chemical linkage between amine-containing modifiers and the surface of mesoporous materials. The chemically linked amine-containing modifiers were found to be on both the inner and outer surfaces. N-[3-(trimethoxysilyl)propyl]ethylenediamine-modified BPMO (A2-BPMO) sample exhibited the highest CO2 uptake (i.e., ∼3.03 mmol/g measured on a volumetric adsorption analyzer) and the fastest adsorption rate (i.e., ∼13 min to attain 90% of the maximum amount) among all the samples studied. Selectivity and reproducibility measurements for the A2-BPMO sample showed quite good performance in flowing N2 gas at 40 mL/min and CO2 gas of 60 mL/min at 25 °C. PMID:25742049

  18. Synthesis of bifunctionalized mesoporous organosilica spheres for high-performance liquid chromatography.

    PubMed

    Zhu, Guiru; Yang, Qihua; Jiang, Dongmei; Yang, Jie; Zhang, Lei; Li, Ying; Li, Can

    2006-01-27

    Phenyl-functionalized mesoporous ethane-silicas with spherical morphology were synthesized by one-step co-condensation of phenyltrimethoxysilane (PTMS) and 1,2-bis(trimethoxysily)ethane (BTME) using a triblock copolymer EO(20)PO(70)EO(20) (P123) as template with the aid of a co-surfactant (cetyltrimethylammonium bromide, CTAB) and a co-solvent (ethanol) in acidic medium. Powder X-ray diffraction (XRD), nitrogen sorption measurement and scanning electron microscopy (SEM) show that phenyl-functionalized ethane-silica has wormhole-like mesostructure and perfect spherical morphology. The chemical stability of phenyl-functionalized mesoporous ethane-silica in basic medium is greatly improved owing to the ethane groups bridged in the mesoporous framework. This work also demonstrates that the phenyl-functionalized mesoporous ethane-silica spheres are excellent packing materials for potential application in the reversed-phase high-performance liquid chromatography (HPLC). PMID:16325828

  19. Periodic organosilica hollow nanospheres as anode materials for lithium ion rechargeable batteries

    NASA Astrophysics Data System (ADS)

    Sasidharan, Manickam; Nakashima, Kenichi; Gunawardhana, Nanda; Yokoi, Toshiyuki; Ito, Masanori; Inoue, Masamichi; Yusa, Shin-Ichi; Yoshio, Masaki; Tatsumi, Takashi

    2011-11-01

    Polymeric micelles with core-shell-corona architecture have been found to be the efficient colloidal templates for synthesis of periodic organosilica hollow nanospheres over a broad pH range from acidic to alkaline media. In alkaline medium, poly (styrene-b-[3-(methacryloylamino)propyl] trimethylammonium chloride-b-ethylene oxide) (PS-PMAPTAC-PEO) micelles yield benzene-silica hollow nanospheres with molecular scale periodicity of benzene groups in the shell domain of hollow particles. Whereas, an acidic medium (pH 4) produces diverse hollow particles with benzene, ethylene, and a mixture of ethylene and dipropyldisulfide bridging functionalities using poly(styrene-b-2-vinyl pyridine-b-ethylene oxide) (PS-PVP-PEO) micelles. These hollow particles were thoroughly characterized by powder X-ray diffraction (XRD), dynamic light scattering (DLS), thermogravimetric analysis (TG/DTA), Fourier transformation infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), magic angle spinning-nuclear magnetic resonance (29Si MAS NMR and 13CP-MAS NMR), Raman spectroscopy, and nitrogen adsorption/desorption analyses. The benzene-silica hollow nanospheres with molecular scale periodicity in the shell domain exhibit higher cycling performance of up to 300 cycles in lithium ion rechargeable batteries compared with micron-sized dense benzene-silica particles.Polymeric micelles with core-shell-corona architecture have been found to be the efficient colloidal templates for synthesis of periodic organosilica hollow nanospheres over a broad pH range from acidic to alkaline media. In alkaline medium, poly (styrene-b-[3-(methacryloylamino)propyl] trimethylammonium chloride-b-ethylene oxide) (PS-PMAPTAC-PEO) micelles yield benzene-silica hollow nanospheres with molecular scale periodicity of benzene groups in the shell domain of hollow particles. Whereas, an acidic medium (pH 4) produces diverse hollow particles with benzene, ethylene, and a mixture of ethylene and

  20. New strategy for surface functionalization of periodic mesoporous silica based on meso-HSiO1.5.

    PubMed

    Xie, Zhuoying; Bai, Ling; Huang, Suwen; Zhu, Cun; Zhao, Yuanjin; Gu, Zhong-Ze

    2014-01-29

    Organic functionalization of periodic mesoporous silicas (PMSs) offers a way to improve their excellent properties and wide applications owing to their structural superiority. In this study, a new strategy for organic functionalization of PMSs is demonstrated by hydrosilylation of the recently discovered "impossible" periodic mesoporous hydridosilica, meso-HSiO1.5. This method overcomes the disadvantages of present pathways for organic functionalization of PMSs with organosilica. Moreover, compared to the traditional functionalization on the surface of porous silicon by hydrosilylation, the template-synthesized meso-HSiO1.5 is more flexible to access functional-groups-loaded PMSs with adjustable microstructures. The new method and materials will have wider applications based on both the structure and surface superiorities. PMID:24432761

  1. Synthesis of periodic mesoporous silica thin films

    SciTech Connect

    Anderson, M.T.; Martin, J.E.; Odinek, J.G.; Newcomer, P.

    1996-06-01

    We have synthesized periodic mesoporous silica thin films from homogeneous solutions. To synthesize the films, a thin layer of a pH 7 micellar coating solution that contains TMOS (tetramethoxysilane) is dip or spin-coated onto Si wafers, borosilicate glass, or quartz substrates. NH3 gas is diffused into the solution and causes rapid hydrolysis and condensation of the TMOS and the formation of periodic mesoporous thin films within 10 seconds. Combination of homogenous solutions and rapid product formation maximizes the concentration of the desired product and provides a controlled, predictable microstructure. The films have been made continuous and crack-free by optimizing initial silica concentration and film thickness. The films are being evaluated as high surface area, size-selective coatings for surface acoustic wave (SAW) sensors.

  2. One-pot construction of multipodal hybrid periodic mesoporous organosilica nanoparticles with crystal-like architectures.

    PubMed

    Croissant, Jonas; Cattoën, Xavier; Wong Chi Man, Michel; Dieudonné, Philippe; Charnay, Clarence; Raehm, Laurence; Durand, Jean-Olivier

    2015-01-01

    The design of hybrid multipodal PMO (mp-PMO) nanoparticles with crystal-like architectures elaborated in a one-pot, two-step process, involving the preparation of a benzene-based spherical PMO core followed by the formation of ethylene-based rod-shaped PMO pods on these cores is described. PMID:25378091

  3. Mesoporous silica nanoparticles with organo-bridged silsesquioxane framework as innovative platforms for bioimaging and therapeutic agent delivery.

    PubMed

    Du, Xin; Li, Xiaoyu; Xiong, Lin; Zhang, Xueji; Kleitz, Freddy; Qiao, Shi Zhang

    2016-06-01

    Mesoporous silica material with organo-bridged silsesquioxane frameworks is a kind of synergistic combination of inorganic silica, mesopores and organics, resulting in some novel or enhanced physicochemical and biocompatible properties compared with conventional mesoporous silica materials with pure Si-O composition. With the rapid development of nanotechnology, monodispersed nanoscale periodic mesoporous organosilica nanoparticles (PMO NPs) and organo-bridged mesoporous silica nanoparticles (MSNs) with various organic groups and structures have recently been synthesized from 100%, or less, bridged organosilica precursors, respectively. Since then, these materials have been employed as carrier platforms to construct bioimaging and/or therapeutic agent delivery nanosystems for nano-biomedical application, and they demonstrate some unique and/or enhanced properties and performances. This review article provides a comprehensive overview of the controlled synthesis of PMO NPs and organo-bridged MSNs, physicochemical and biocompatible properties, and their nano-biomedical application as bioimaging agent and/or therapeutic agent delivery system. PMID:27017579

  4. Refractometry of organosilica microspheres

    SciTech Connect

    Seet, Katrina Y. T.; Vogel, Robert; Nieminen, Timo A.; Knoener, Gregor; Rubinsztein-Dunlop, Halina; Trau, Matt; Zvyagin, Andrei V

    2007-03-20

    The refractive index of novel organosilica (nano/micro) material is determined using two methods. The first method is based on analysis of optical extinction efficiency of organosilica beads versus wavelength, which is obtained by a standard laboratory spectrometer. The second method relies on the measurable trapping potential of these beads in the focused light beam (laser tweezers). Polystyrene beads were used to test these methods, and the determined dispersion curves of refractive-index values have been found accurate. The refractive index of organosilica beads has been determined to range from 1.60 to 1.51 over the wavelength range of300-1100 nm.

  5. Sunlight-Triggered Nanoparticle Synergy: Teamwork of Reactive Oxygen Species and Nitric Oxide Released from Mesoporous Organosilica with Advanced Antibacterial Activity.

    PubMed

    Gehring, Julia; Trepka, Bastian; Klinkenberg, Nele; Bronner, Hannah; Schleheck, David; Polarz, Sebastian

    2016-03-01

    Colonization of surfaces by microorganisms is an urging problem. In combination with the increasing antibiotic resistance of pathogenic bacteria, severe infections are reported more frequently in medical settings. Therefore, there is a large demand to explore innovative surface coatings that provide intrinsic and highly effective antibacterial activity. Materials containing silver nanoparticles have been developed in the past for this purpose, but this solution has come into criticism due to various disadvantages like notable toxicity against higher organisms, the high price, and low abundance of silver. Here, we introduce a new, sunlight-mediated organosilica nanoparticle (NP) system based on silver-free antibacterial activity. The simultaneous release of nitric oxide (NO) in combination with singlet oxygen and superoxide radicals (O2(•-)) as reactive oxygen species (ROS) leads to the emergence of highly reactive peroxynitrite molecules with significantly enhanced biocidal activity. This special cooperative effect can only be realized, if the ROS-producing moieties and the functional entities releasing NO are spatially separated from each other. In one type of particle, Rose Bengal as an efficient singlet oxygen ((1)O2) producer was covalently bound to SH functionalities applying thiol-ene click chemistry. "Charging" the second type of particles with NO was realized by quantitatively transferring the thiol groups into S-nitrosothiol functionalities. We probed the oxidation power of ROS-NP alone and in combination with NO-NP using sunlight as a trigger. The high antibacterial efficiency of dual-action nanoparticles was demonstrated using disinfection assays with the pathogenic bacterium Pseudomonas aeruginosa. PMID:26883897

  6. Non-ionic block copolymers leading to a highly ordered organosilica material

    NASA Astrophysics Data System (ADS)

    Rebbin, V.; Rothkirch, A.; Vainio, U.; Funari, S. S.

    2012-03-01

    Phenylene-bridged periodic mesoporous organosilica (PMO) materials with hexaethylene glycol mono hexadecylether (C16(EO)6) as structure directing agent (SDA) in acidic solution were synthesised and the reaction was studied in different conditions, including in situ small angle X-ray scattering at room temperature and at 60 °C. The in situ SAXS investigations at 60 °C show the formation of a 2D hexagonal mesostructure after 3 hours reaction time. In contrast to these results the same reaction performed in the laboratory produced a powder that, after drying at room temperature, shows a large number of diffraction peaks, allowing identifying a lamellar structure, possibly in coexistence of a micellar cubic structure (space group Pm3n). Aposteriori removal of the surfactant from the powder synthesised in the laboratory led to the collapse of the lamellar structure.

  7. Directional Materials—Nanoporous Organosilica Monoliths with Multiple Gradients Prepared Using Click Chemistry.

    PubMed

    Schachtschneider, Andreas; Wessig, Martin; Spitzbarth, Martin; Donner, Adrian; Fischer, Christian; Drescher, Malte; Polarz, Sebastian

    2015-09-01

    The existence of more than one functional entity is fundamental for materials, which are desired of fulfilling complementary or succeeding tasks. Whereas it is feasible to make materials with a homogeneous distribution of two different, functional groups, cases are extremely rare exhibiting a smooth transition from one property to the next along a defined distance. We present a new approach leading to high-surface area solids with functional gradients at the microstructural level. Periodically ordered mesoporous organosilicas (PMOs) and aerogel-like monolithic bodies with a maximum density of azide groups were prepared from a novel sol-gel precursor. The controlled and fast conversion of the azide into numerous functions by click chemistry is the prerequisite for the implementation of manifold gradient profiles. Herein we discuss materials with chemical, optical and structural gradients, which are interesting for all applications requiring directionality, for example, chromatography. PMID:26190518

  8. Fuel-Cell Electrolytes Based on Organosilica Hybrid Proton Conductors

    NASA Technical Reports Server (NTRS)

    Narayan, Sri R.; Yen, Shiao-Pin S.

    2008-01-01

    A new membrane composite material that combines an organosilica proton conductor with perfluorinated Nafion material to achieve good proton conductivity and high-temperature performance for membranes used for fuel cells in stationary, transportation, and portable applications has been developed. To achieve high proton conductivities of the order of 10(exp -1)S/cm over a wide range of temperatures, a composite membrane based on a new class of mesoporous, proton-conducting, hydrogen-bonded organosilica, used with Nafion, will allow for water retention and high proton conductivity over a wider range of temperatures than currently offered by Nafion alone. At the time of this reporting, this innovation is at the concept level. Some of the materials and processes investigated have shown good proton conductivity, but membranes have not yet been prepared and demonstrated.

  9. A general strategy for the rational design of size-selective mesoporous catalysts.

    PubMed

    Zapilko, Clemens; Liang, Yucang; Nerdal, Willy; Anwander, Reiner

    2007-01-01

    A series of functionalized mesoporous silicas with cagelike pore topology has been synthesized and screened for size-selective catalytic transformations. The aluminum-catalyzed Meerwein-Ponndorf-Verley (MPV) reduction of differently sized aromatic aldehydes (benzaldehyde and 1-pyrenecarbox-aldehyde) has been investigated as a test reaction. The catalysts were synthesized in a two-step grafting sequence comprising pore-size engineering of mesoporous silicas (SBA-1, SBA-2, SBA-16) with long-chain alkyl dimethylaminosilanes and surface organoaluminum chemistry with triethylaluminum [{Al(CH(2)CH(3))3}2]. Size-selective reaction behavior was found for small pore SBA-1 materials, and the selectivity could be efficiently tuned by selecting a silylating reagent of appropriate size. The results are compared with the catalytic performance of a large-pore periodic mesoporous organosilica PMO[SBA-1] and the nonporous high-surface-area silicas Aerosil 300/380. PMID:17203494

  10. Probing the molecular character of periodic mesoporous organosilicates via photoluminescence of Lewis acid-base adducts.

    PubMed

    Thiel, Indre; Fedorov, Alexey; Verel, Rene; Yakunin, Sergii; Kovalenko, Maksym V; Copéret, Christophe

    2016-05-18

    Photoluminescence decay was used as a structure-sensitive method to compare the distribution of emitting sites in periodic mesoporous organosilicates (PMOs) to their respective molecular analogs. The observed close similarity of PL decays confirms the molecular nature of PMOs and high homogeneity of emitting sites. PMID:27156706

  11. Nanocasting of Periodic Mesoporous Materials as an Effective Strategy to Prepare Mixed Phases of Titania.

    PubMed

    Mahoney, Luther; Rasalingam, Shivatharsiny; Wu, Chia-Ming; Koodali, Ranjit T

    2015-01-01

    Mesoporous titanium dioxide materials were prepared using a nanocasting technique involving silica SBA-15 as the hard-template. At an optimal loading of titanium precursor, the hexagonal periodic array of pores in SBA-15 was retained. The phases of titanium dioxide could be easily varied by the number of impregnation cycles and the nature of titanium alkoxide employed. Low number of impregnation cycles produced mixed phases of anatase and TiO₂(B). The mesoporous TiO₂ materials were tested for solar hydrogen production, and the material consisting of 98% anatase and 2% TiO₂(B) exhibited the highest yield of hydrogen from the photocatalytic splitting of water. The periodicity of the pores was an important factor that influenced the photocatalytic activity. This study indicates that mixed phases of titania containing ordered array of pores can be prepared by using the nanocasting strategy. PMID:26670222

  12. 3-D periodic mesoporous nickel oxide for nonenzymatic uric acid sensors with improved sensitivity

    NASA Astrophysics Data System (ADS)

    Huang, Wei; Cao, Yang; Chen, Yong; Zhou, Yang; Huang, Qingyou

    2015-12-01

    3-D periodic mesoporous nickel oxide (NiO) particles with crystalline walls have been synthesized through the microwave-assisted hard template route toward the KIT-6 silica. It was investigated as a nonenzymatic amperometric sensor for the detection of uric acid. 3-D periodic nickel oxide matrix has been obtained by the hard template route from the KIT-6 silica template. The crystalline nickel oxide belonged to the Ia3d space group, and its structure was characterized by X-ray diffraction (XRD), N2 adsorption-desorption, and transmission electron microscopy (TEM). The analysis results showed that the microwave-assisted mesoporous NiO materials were more appropriate to be electrochemical sensors than the traditional mesoporous NiO. Cyclic voltammetry (CV) revealed that 3-D periodic NiO exhibited a direct electrocatalytic activity for the oxidation of uric acid in sodium hydroxide solution. The enzyme-less amperometric sensor used in the detection of uric acid with detection limit of 0.005 μM (S/N = 3) over wide linear detection ranges up to 0.374 mM and with a high sensitivity of 756.26 μA mM-1 cm-2, and a possible mechanism was also given in the paper.

  13. Critical aspects in the production of periodically ordered mesoporous titania thin films.

    PubMed

    Soler-Illia, Galo J A A; Angelomé, Paula C; Fuertes, M Cecilia; Grosso, David; Boissiere, Cedric

    2012-04-21

    Periodically ordered mesoporous titania thin films (MTTF) present a high surface area, controlled porosity in the 2-20 nm pore diameter range and an amorphous or crystalline inorganic framework. These materials are nowadays routinely prepared by combining soft chemistry and supramolecular templating. Photocatalytic transparent coatings and titania-based solar cells are the immediate promising applications. However, a wealth of new prospective uses have emerged on the horizon, such as advanced catalysts, perm-selective membranes, optical materials based on plasmonics and photonics, metamaterials, biomaterials or new magnetic nanocomposites. Current and novel applications rely on the ultimate control of the materials features such as pore size and geometry, surface functionality and wall structure. Even if a certain control of these characteristics has been provided by the methods reported so far, the needs for the next generation of MTTF require a deeper insight in the physical and chemical processes taking place in their preparation and processing. This article presents a critical discussion of these aspects. This discussion is essential to evolve from know-how to sound knowledge, aiming at a rational materials design of these fascinating systems. PMID:22419250

  14. Anisotropic growth-induced synthesis of dual-compartment Janus mesoporous silica nanoparticles for bimodal triggered drugs delivery.

    PubMed

    Li, Xiaomin; Zhou, Lei; Wei, Yong; El-Toni, Ahmed Mohamed; Zhang, Fan; Zhao, Dongyuan

    2014-10-22

    Multifunctional dual-compartment Janus mesoporous silica nanocomposites of UCNP@SiO2@mSiO2&PMO (UCNP = upconversion nanoparticle, PMO = periodic mesoporous organosilica) containing core@shell@shell structured UCNP@SiO2@mSiO2 nanospheres and PMO single-crystal nanocubes have been successfully synthesized via a novel anisotropic island nucleation and growth approach with the ordered mesostructure. The asymmetric Janus nanocomposites show a very uniform size of ~300 nm and high surface area of ~1290 m(2)/g. Most importantly, the Janus nanocomposites possess the unique dual independent mesopores with different pore sizes (2.1 nm and 3.5-5.5 nm) and hydrophobicity/hydrophilicity for loading of multiple guests. The distinct chemical properties of the silica sources and the different mesostructures of the dual-compartments are the necessary prerequisites for the formation of the Janus nanostructure. With the assistance of the near-infrared (NIR) to ultraviolet/visible (UV-vis) optical properties of UCNPs and heat-sensitive phase change materials, the dual-compartment Janus mesoporous silica nanocomposites can be further applied into nanobiomedicine for heat and NIR light bimodal-triggered dual-drugs controllable release. It realizes significantly higher efficiency for cancer cell killing (more than 50%) compared to that of the single-triggered drugs delivery system (~25%). PMID:25251874

  15. Acid Functionalized Mesoporous Ordered Materials for the Production of 5-Hydroxymethyfurfural from Carbohydrates

    NASA Astrophysics Data System (ADS)

    Crisci, Anthony J.

    Solid acid catalysts were designed for the conversion of fructose to 5-hydroxymethylfurfural (HMF). Some of the catalysts incorporate thioether groups to promote the tautomerization of fructose to its furanose form, as well as sulfonic acid groups to catalyze its dehydration. A bifunctional silane, 3-((3-(trimethoxysilyl)propyl)thio)propane-1-sulfonic acid (TESAS), was designed for incorporation into SBA-15-type silica by co-condensation. To achieve mesopore ordering in the functionalized silica, the standard SBA-15 synthetic protocol was modified, resulting in well-formed hexagonal particles. Functional groups incorporated into mesoporous silica by co-condensation are more robust under the reaction conditions than those grafted onto a non-porous silica. In a variation, the thioether group of TESAS was oxidized by H2O 2 to the sulfone during the synthesis of the modified SBA-15. The materials were tested in batch reactors and compared in the selective dehydration of fructose to 5-hydroxymethylfurfural (HMF). Compared to benchmark catalysts, the thioether-containing TESAS-SBA-15 showed the highest activity in the dehydration of aqueous fructose, as well as the highest selectivity towards HMF (71 % at 84 % conversion). In addition, the stability of several supported acid catalysts was evaluated in tubular reactors designed to produce 5-hydroxymethylfurfural (HMF) continuously. The reactors, packed with the solid catalysts, were operated at 403 K for extended periods, up to 180 h. The behaviors of three propylsulfonic acid-functionalized, ordered porous silicas (one inorganic SBA-15-type silica, and two ethane-bridged SBA-15-type organosilicas) were compared with that of a propylsulfonic acid-modified, non-ordered porous silica. The HMF selectivity of the catalysts with ordered pore structures ranged from 60 to 75 %, while the selectivity of the non-ordered catalyst peaked at 20 %. The latter was also the least stable, deactivating with a first-order rate constant of

  16. Preparation of periodic mesoporous silica-included divacant Keggin units for the catalytic oxidation of styrene to synthesize styrene oxide

    NASA Astrophysics Data System (ADS)

    Yu, Xiaodan; Xu, Leilei; Yang, Xia; Guo, Yingna; Li, Kexin; Hu, Jianglei; Li, Wei; Ma, Fengyan; Guo, Yihang

    2008-05-01

    Periodic mesoporous composite catalysts, [( n-C 4H 9) 4N] 4[γ-SiW 10O 34(H 2O) 2]/SBA-15 (TBA-1*/SBA-15, where TBA-1* = [( n-C 4H 9) 4N] 4[γ-SiW 10O 34(H 2O) 2]), with TBA-1* loadings of 4.3-14.8% were prepared by simultaneous hydrolysis and co-condensation of the tetraethoxysilane (TEOS) in the presence of divacant Keggin-type polyoxometalate and triblock copolymer surfactant (P123) followed by hydrothermal treatment process. Structure integrity of the Keggin unit in as-prepared composites was studied by Fourier transform infrared spectroscopy (FT-IR), Raman scattering spectra, and 29Si magic-angle spinning (MAS) NMR. Periodic mesoporous structure of the composites was evaluated by low-angle X-ray powder diffraction (LXRD) patterns, nitrogen porosimetry, and transmission electron microscope (TEM) measurements. As-prepared TBA-1*/SBA-15 was used as an heterogeneous oxidation catalyst for the styrene epoxidation reaction to synthesize styrene oxide in the presence of dilute H 2O 2 (30%), and influences of solvent, molar ratio of styrene to H 2O 2, TBA-1* loading on the styrene conversion, styrene oxide yield and selectivity were considered.

  17. Breakable Hybrid Organosilica Nanocapsules for Protein Delivery.

    PubMed

    Prasetyanto, Eko Adi; Bertucci, Alessandro; Septiadi, Dedy; Corradini, Roberto; Castro-Hartmann, Pablo; De Cola, Luisa

    2016-03-01

    The direct delivery of specific proteins to live cells promises a tremendous impact for biological and medical applications, from therapeutics to genetic engineering. However, the process mostly involves tedious techniques and often requires extensive alteration of the protein itself. Herein we report a straightforward approach to encapsulate native proteins by using breakable organosilica matrices that disintegrate upon exposure to a chemical stimulus. The biomolecule-containing capsules were tested for the intracellular delivery of highly cytotoxic proteins into C6 glioma cells. We demonstrate that the shell is broken, the release of the active proteins occurs, and therefore our hybrid architecture is a promising strategy to deliver fragile biomacromolecules into living organisms. PMID:26643574

  18. Mesoporous silicates: Materials science and biological applications

    NASA Astrophysics Data System (ADS)

    Roggers, Robert Anthony

    concentrations of particles. The lipid bilayer allowed the particle to interface with particle without resulting in haemolysis. It was observed however, that spiculation (damage) of the RBCs still occurred despite the lack of cell lysis. During the course of the study, the composition of the outer leaflet of the lipid bilayer was altered to more closely match that of the outer leaflet of RBCs. This alteration proved to make the LB-l-MSN particle extremely compatible with RBCs in that spiculation of the cells was reduced by more than 50 % according to observations by scanning electron microscopy. A new synthetic route to mesoporous silica nanoparticles (MSNs) was developed using water in oil (W/O) emulsions was developed. This method relies on the presence of an amphiphilic stabilizer molecule to control the size and quality of the spherical morphology of the particles. Partitioning of the oil phase into cetyltrimethylammonium bromide surfactant molecules is implicated in expanding the size of the mesopores from the standard 3 nm pore to 7 nm. This material is extensively characterized using X-ray diffraction techniques and TEM microscopy. Chapter 3 also outlines the synthesis of a new periodic mesoporous organosilica (PMO) in which the bridging organic group is a benzobisoxazole molecule synthesized in the research group of Dr. Malika Jeffries-EL. While no immediate application of this new particle was proven, we propose this structure as the basis for a new class of light harvesting or light emitting diode material based on the performance of the polymers containing these benzobisoxazole moieties and functionalized dyes. The final project was the initial development of an N-heterocyclic carbene ligand based on an imidazole framework. This project represents significant synthetic challenges in that the pattern of substitution on the imidazole framework has not been reported in the literature to the best of our knowledge. Despite the synthetic challenges, significant progress has

  19. Multifunctional Gold-Mesoporous Silica Nanocomposites for Enhanced Two-Photon Imaging and Therapy of Cancer Cells

    PubMed Central

    Croissant, Jonas G.; Qi, Christian; Maynadier, Marie; Cattoën, Xavier; Wong Chi Man, Michel; Raehm, Laurence; Mongin, Olivier; Blanchard-Desce, Mireille; Garcia, Marcel; Gary-Bobo, Magali; Durand, Jean-Olivier

    2016-01-01

    Three dimensional sub-micron resolution has made two-photon nanomedicine a very promising medical tool for cancer treatment since current techniques cause significant side effects for lack of spatial selectivity. Two-photon-excited (TPE) photodynamic therapy (PDT) has been achieved via mesoporous nanoscaffolds, but the efficiency of the treatment could still be improved. Herein, we demonstrate the enhancement of the treatment efficiency via gold-mesoporous organosilica nanocomposites for TPE-PDT in cancer cells when compared to mesoporous organosilica particles. We performed the first comparative study of the influence of the shape and spatial position of gold nanoparticles (AuNPs) with mesoporous silica nanoparticles (MSN) functionalized with thiol groups and doped with a two-photon electron donor (2PS). The resulting multifunctional nanocarriers displayed TPE-fluorescence and were imaged inside cells. Furthermore, mesoporous organosilica NPs decorated gold nanospheres (AuNSs) induced 63 percent of selective killing on MCF-7 breast cancer cells. This study thus provides insights for the design of more effective multifunctional two-photon-sensitive nanocomposites via AuNPs for biomedical applications. PMID:26870736

  20. Fluorescent hybrid with electron acceptor methylene viologen units inside the pore walls of mesoporous MCM-48 silica.

    PubMed

    Liu, Aifeng; Han, Shuhua; Che, Hongwei; Hua, Lan

    2010-03-01

    A fluorescent material with methylene viologen units bonded into the pore walls of the mesoporous MCM-48 silica is synthesized using the method of periodic mesoporous organosilicas with bridging groups (PMOs), in which the methylene viologen units are located within the channel walls through the cohydrolysis and cocondensation of dichloride of N,N'-bis(triethoxysilylmethyl)-4,4'-bipyridinium (VP) and tetraethoxysilane (TEOS). It is found that the suspension of the hybrid emits fluorescence at ca. 380 and 420 nm, which is attributed to the S(1) state (pi* --> pi) of the viologen and the charge-transfer complex between the bipyridinium units as electron acceptor and accompanying halide (Br(-), Cl(-)) as donor components, respectively. The fluorescent emission intensity increases with increasing the amount of the VP covalently bonded to MCM-48 framework. The fluorescent intensity of VP adsorbed on the surface of the pore channel of MCM-48 was greatly weaker than that of the hybrid MCM-48-VP at the same molar ratio of TEOS to VP. No fluorescence was observed for pure VP. The different fluorescent intensity is ascribed to the fact that restricted degree of the rotation between two pyridine rings is different. It could be prospected that this material is potentially applied in drug delivery and fluorescence probing for medical diagnosis and synchronous therapy. PMID:20104919

  1. Preparation and characterization of mesoporous silicas modified with chiral selectors as stationary phase for high-performance liquid chromatography.

    PubMed

    Pérez-Quintanilla, Damián; Morante-Zarcero, Sonia; Sierra, Isabel

    2014-01-15

    New hybrid materials were prepared as novel chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC). Pure mesoporous silica (SM) and ethylene-bridged periodic mesostructured organosilica (PMO) were functionalized, by a post-synthesis method, with derivates of erythromycin and vancomycin. N2 adsorption-desorption measurements, XRD, FT-IR, MAS NMR, SEM, TEM and elemental analysis were used to characterize the physico-chemical properties of these mesostructured materials, before and after the modification process. The synthesized particles had non-symmetrical 3-D wormhole-like mesostructure, spherical morphology, and a mean pore diameter between 53 and 59 Å. CSPs prepared were tested for the separation of four chiral β-blockers (atenolol, metoprolol, pindolol and propranolol) in normal phase (NP) and polar organic phase (PO) elution modes. Much stronger chiral interaction was observed in vancomycin-modified silicas. Results obtained in these preliminary studies will permit in future works to improve the synthesis route in order to design mesoporous materials with better performance as a chiral stationary phase for HPLC. PMID:24231079

  2. The development of chiral nematic mesoporous materials.

    PubMed

    Kelly, Joel A; Giese, Michael; Shopsowitz, Kevin E; Hamad, Wadood Y; MacLachlan, Mark J

    2014-04-15

    of the mesoporous films can be varied by using assorted organosilica precursors. After removal of the cellulose by acid-catalyzed hydrolysis, highly porous, iridescent organosilica films are obtained. These materials are flexible and offer the ability to tune the chemical and mechanical properties through variation of the organic spacer. Chiral nematic mesoporous silica and organosilica materials, obtainable as centimeter-scale freestanding films, are interesting hosts for nanomaterials. When noble metal nanoparticles are incorporated into the pores, they show strong circular dichroism signals associated with their surface plasmon resonances that arise from dipolar coupling of the particles within the chiral nematic host. Fluorescent conjugated polymers show induced circular dichroism spectra when encapsulated in the chiral nematic host. The porosity, film structure, and optical properties of these materials could enable their use in sensors. We describe the development of chiral nematic mesoporous silica and organosilica, demonstrate different avenues of host-guest chemistry, and identify future directions that exploit the unique combination of properties present in these materials. The examples covered in this Account demonstrate that there is a rich diversity of composite materials accessible using CNC templating. PMID:24694253

  3. Kinetic analysis of the thermal processing of silica and organosilica.

    PubMed

    Kappert, Emiel J; Bouwmeester, Henny J M; Benes, Nieck E; Nijmeijer, Arian

    2014-05-15

    The incorporation of an organic group into sol-gel-derived silica causes significant changes in the structure and properties of these materials. Therefore, the thermal treatment of organosilica materials may require a different approach. In the present paper, kinetic parameters (activation energy, pre-exponential constant, and reaction models) have been determined from mass loss data for the dehydration, dehydroxylation, and decomposition reactions that take place upon heating silica and organosilica. Parameters were obtained by employing model-free isoconversional methods to data obtained under multiple heating rates as well as by multivariate analysis of the kinetics using a multistep reaction model with distributed activation energy. For silica, it can be concluded that the reaction atmosphere (i.e., inert or thermo-oxidative) has no influence on the reaction rate of the dehydration and dehydroxylation reactions that are responsible for the densification of the material. Under inert atmosphere, full dehydration can be reached without affecting the organic moiety. Achieving complete dehydroxylation of the organosilica is practically impossible as decomposition does manifest itself under commonly employed calcination temperatures. This indicates that prudence is required in designing a heat treatment program for these hybrid materials. To aid in optimizing the thermal treatment, a predictive model was developed, which can be used to forecast the extent of dehydration, dehydroxylation, and decomposition reactions under a multitude of temperature programs. PMID:24754674

  4. Detection of the volatile organic compounds emitted from paints using optical fibre long period grating modified with the mesoporous nano-scale coating

    NASA Astrophysics Data System (ADS)

    Hromadka, Jiri; James, Stephen; Davis, Frank; Tatam, Ralph P.; Crump, Derrick; Korposh, Sergiy

    2015-09-01

    An optical fibre long period grating (LPG) modified with a mesoporous film infused with a calixarene as a functional compound was employed for the detection of a mixture of volatile organic compounds (VOCs). The sensing mechanism is based on the transduction of the refractive index change induced by the complexion of the VOCs with calixarene into a change in the form of the transmission spectrum of the LPG. An LPG, modified with a calixarene-infused coating comprising 5 cycles of silica nanoparticles/poly(allylamine hydrochloride) polycation (SiO2/PAH), was exposed to mixture of VOCs emitted from paint at conditions simulating ISO standards test (16000-10).

  5. Enzyme Shielding in an Enzyme-thin and Soft Organosilica Layer.

    PubMed

    Correro, M Rita; Moridi, Negar; Schützinger, Hansjörg; Sykora, Sabine; Ammann, Erik M; Peters, E Henrik; Dudal, Yves; Corvini, Philippe F-X; Shahgaldian, Patrick

    2016-05-17

    The fragile nature of most enzymes is a major hindrance to their use in industrial processes. Herein, we describe a synthetic chemical strategy to produce hybrid organic/inorganic nanobiocatalysts; it exploits the self-assembly of silane building blocks at the surface of enzymes to grow an organosilica layer, of controlled thickness, that fully shields the enzyme. Remarkably, the enzyme triggers a rearrangement of this organosilica layer into a significantly soft structure. We demonstrate that this change in stiffness correlates with the biocatalytic turnover rate, and that the organosilica layer shields the enzyme in a soft environment with a markedly enhanced resistance to denaturing stresses. PMID:27062137

  6. Formation of Periodically Arranged Nanobubbles in Mesopores: Capillary Bridge Formation and Cavitation during Sorption and Solidification in an Hierarchical Porous SBA-15 Matrix.

    PubMed

    Hofmann, Tommy; Wallacher, Dirk; Perlich, Jan; Koyiloth Vayalil, Sarathlal; Huber, Patrick

    2016-03-29

    We report synchrotron-based small-angle X-ray scattering experiments on a template-grown porous silica matrix (Santa Barbara Amorphous-15) upon in situ sorption of fluorinated pentane C5F12 along with volumetric gas sorption isotherm measurements. Within the mean-field model of Saam and Cole for vapor condensation in cylindrical pores, a nitrogen and C5F12 sorption isotherm is well described by a bimodal pore radius distribution dominated by meso- and micropores with 3.4 and 1.6 nm mean radius, respectively. In the scattering experiments, two different periodicities become evident. One of them (d1 = 11.5 nm) reflects the next nearest neighbor distance in a 2D-hexagonal lattice of tubular mesopores. A second periodicity (d2 = 11.4 nm) found during in situ sorption and freezing experiments is traced back to a superstructure along the cylindrical mesopores. It is compatible with periodic pore corrugations found in electron tomograms of empty SBA-15 by Gommes et al. ( Chem. Mater. 2009, 21, 1311 - 1317). A Rayleigh-Plateau instability occurring at the cylindrical blockcopolymer micelles characteristic of the SBA-15 templating process quantitatively accounts for the superstructure and thus the spatial periodicity of the pore wall corrugation. The consequences of this peculiar morphological feature on the spatial arrangement of C5F12, in particular the formation of periodically arranged nanobubbles (or voids) upon adsorption, desorption, and freezing of liquids, are discussed in terms of capillary bridge formation and cavitation in tubular but periodically corrugated pores. PMID:26940230

  7. Mesoporous silicates: Materials science and biological applications

    NASA Astrophysics Data System (ADS)

    Roggers, Robert Anthony

    concentrations of particles. The lipid bilayer allowed the particle to interface with particle without resulting in haemolysis. It was observed however, that spiculation (damage) of the RBCs still occurred despite the lack of cell lysis. During the course of the study, the composition of the outer leaflet of the lipid bilayer was altered to more closely match that of the outer leaflet of RBCs. This alteration proved to make the LB-l-MSN particle extremely compatible with RBCs in that spiculation of the cells was reduced by more than 50 % according to observations by scanning electron microscopy. A new synthetic route to mesoporous silica nanoparticles (MSNs) was developed using water in oil (W/O) emulsions was developed. This method relies on the presence of an amphiphilic stabilizer molecule to control the size and quality of the spherical morphology of the particles. Partitioning of the oil phase into cetyltrimethylammonium bromide surfactant molecules is implicated in expanding the size of the mesopores from the standard 3 nm pore to 7 nm. This material is extensively characterized using X-ray diffraction techniques and TEM microscopy. Chapter 3 also outlines the synthesis of a new periodic mesoporous organosilica (PMO) in which the bridging organic group is a benzobisoxazole molecule synthesized in the research group of Dr. Malika Jeffries-EL. While no immediate application of this new particle was proven, we propose this structure as the basis for a new class of light harvesting or light emitting diode material based on the performance of the polymers containing these benzobisoxazole moieties and functionalized dyes. The final project was the initial development of an N-heterocyclic carbene ligand based on an imidazole framework. This project represents significant synthetic challenges in that the pattern of substitution on the imidazole framework has not been reported in the literature to the best of our knowledge. Despite the synthetic challenges, significant progress has

  8. Label-Free Luminescent Mesoporous Silica Nanoparticles for Imaging and Drug Delivery

    PubMed Central

    Chen, Hongmin; Zhen, Zipeng; Tang, Wei; Todd, Trever; Chuang, Yen-Jun; Wang, Lianchun; Pan, Zhengwei; Xie, Jin

    2013-01-01

    We report herein a straightforward and label-free approach to prepare luminescent mesoporous silica nanoparticles. We found that calcination at 400 °C can grant mesoporous organosilica nanoparticles with strong fluorescence of great photo- and chemical stability. The luminescence is found to originate from the carbon dots generated from the calcination, rather than the defects in the silica matrix as was believed previously. The calcination does not impact the particles' abilities to load drugs and conjugate to biomolecules. In a proof-of-concept study, we demonstrated that doxorubicin (Dox) can be efficiently encapsulated into these fluorescent mesoporous silica nanoparticles. After coupled to c(RGDyK), the nanoconjugates can efficiently home to tumors through interactions with integrin αvβ3 overexpressed on the tumor vasculature. This calcination-induced luminescence is expected to find wide applications in silica-based drug delivery, nanoparticle coating, and immunofluorescence imaging. PMID:24052805

  9. Controllable Synthesis and Surface Wettability of Flower-Shaped Silver Nanocube-Organosilica Hybrid Colloidal Nanoparticles.

    PubMed

    Sun, Yangyi; Chen, Min; Zhou, Shuxue; Hu, Jing; Wu, Limin

    2015-12-22

    Synthesis of hybrid colloidal particles with complex and hierarchical structures is attracting much interest theoretically and technically in recent years, but still remains a tremendous challenge. Here, we present a mild and controllable wet-chemical method for the synthesis of silver nanocube (Ag NC)-organosilica hybrid particles with finely tuned numbers (with one, two, three, four, five, or six) and sizes of organosilica petals, by simply controlling the affinity with Ag NC/nature, amount, and prehydrolysis process of alkoxysilanes. The morphologies of hybrid colloidal particles have an obvious influence on the surface wettability of the hybrid particle-based films. More and larger organosilica petals can increase the surface hydrophobicity of the hybrid particle-based films. PMID:26564332

  10. Mesoporous catalysts, supports and catalytic membranes based on MCM-41. Final report for the period January 15,2000 - January 14, 2001

    SciTech Connect

    Haller, Gary L.

    2001-07-01

    The research had two objectives: to understand the effect of pore size on the chemistry and activity of active sites, and to investigate both the pore size and anchoring effect of Me-MCM-41 on Pt clusters (where Me is a metal incorporated in silica-based MCM-41). The focus is not on the effect of pore size on transport of reactants and products, but on how the local radius of curvature might affect the properties of a foreign ion embedded in a silicon wall that acts as a catalytic site or anchor for the catalytic site. The mesoporous molecular sieve, MCM-41, allows the variation of pore size with constant composition and pore geometry so these new materials allow this scientific question to be addressed for the first time. For the anchoring effect, concentration was on Sn-MCM-41 to prepare Pt/Sn-MCM-41 catalysts, by characterizing these and by testing them with probe reforming reactions (dehydrogenation, isomerization and aromatization). Although this is a final report on activity January 15, 2000 - January 14, 2001, this was a continuation of work initiated in the three-year grant period January 15, 1997 - January 14, 2000, so the summary of progress for these three years is appended for completeness.

  11. Synthesis of a metal-organic framework confined in periodic mesoporous silica with enhanced hydrostability as a novel fiber coating for solid-phase microextraction.

    PubMed

    Abolghasemi, Mir Mahdi; Yousefi, Vahid; Piryaei, Marzieh

    2015-04-01

    A metal-organic framework/periodic mesoporous silica (MOF-5@SBA-15) hybrid material has been prepared by using SBA-15 as a matrix. The prepared MOF-5@SBA-15 hybrid material was then deposited on a stainless-steel wire to obtain the fiber for the solid-phase microextraction of phenolic compounds. Modifications in the metal-organic framework structure have proven to improve the extraction performance of MOF/SBA-15 hybrid materials, compared to pure MOF-5 and SBA-15. Optimum conditions include an extraction temperature of 75°C, a desorption temperature of 260°C, and a salt concentration of 20% w/v. The dynamic linear range and limit of detection range from 0.1-500 and from 0.01-3.12 ng/mL, respectively. The repeatability for one fiber (n = 3), expressed as relative standard deviation, is between 4.3 and 9.6%. The method offers the advantage of being simple to use, rapid, and low cost, the thermal stability of the fiber, and high relative recovery (compared to conventional methods) represent additional attractive features. PMID:25645539

  12. Breakable mesoporous silica nanoparticles for targeted drug delivery.

    PubMed

    Maggini, Laura; Cabrera, Ingrid; Ruiz-Carretero, Amparo; Prasetyanto, Eko A; Robinet, Eric; De Cola, Luisa

    2016-04-01

    "Pop goes the particle". Here we report on the preparation of redox responsive mesoporous organo-silica nanoparticles containing disulfide (S-S) bridges (ss-NPs) that, even upon the exohedral grafting of targeting ligands, retained their ability to undergo structural degradation, and increase their local release activity when exposed to a reducing agent. This degradation could be observed also inside glioma C6 cancer cells. Moreover, when anticancer drug-loaded pristine and derivatized ss-NPs were fed to glioma C6 cells, the responsive hybrids were more effective in their cytotoxic action compared to non-breakable particles. The possibility of tailoring the surface functionalization of this hybrid, yet preserving its self-destructive behavior and enhanced drug delivery properties, paves the way for the development of effective biodegradable materials for in vivo targeted drug delivery. PMID:26974603

  13. Breakable mesoporous silica nanoparticles for targeted drug delivery

    NASA Astrophysics Data System (ADS)

    Maggini, Laura; Cabrera, Ingrid; Ruiz-Carretero, Amparo; Prasetyanto, Eko A.; Robinet, Eric; de Cola, Luisa

    2016-03-01

    ``Pop goes the particle''. Here we report on the preparation of redox responsive mesoporous organo-silica nanoparticles containing disulfide (S-S) bridges (ss-NPs) that, even upon the exohedral grafting of targeting ligands, retained their ability to undergo structural degradation, and increase their local release activity when exposed to a reducing agent. This degradation could be observed also inside glioma C6 cancer cells. Moreover, when anticancer drug-loaded pristine and derivatized ss-NPs were fed to glioma C6 cells, the responsive hybrids were more effective in their cytotoxic action compared to non-breakable particles. The possibility of tailoring the surface functionalization of this hybrid, yet preserving its self-destructive behavior and enhanced drug delivery properties, paves the way for the development of effective biodegradable materials for in vivo targeted drug delivery.``Pop goes the particle''. Here we report on the preparation of redox responsive mesoporous organo-silica nanoparticles containing disulfide (S-S) bridges (ss-NPs) that, even upon the exohedral grafting of targeting ligands, retained their ability to undergo structural degradation, and increase their local release activity when exposed to a reducing agent. This degradation could be observed also inside glioma C6 cancer cells. Moreover, when anticancer drug-loaded pristine and derivatized ss-NPs were fed to glioma C6 cells, the responsive hybrids were more effective in their cytotoxic action compared to non-breakable particles. The possibility of tailoring the surface functionalization of this hybrid, yet preserving its self-destructive behavior and enhanced drug delivery properties, paves the way for the development of effective biodegradable materials for in vivo targeted drug delivery. Electronic supplementary information (ESI) available: Full experimental procedures, additional SEM and TEM images of particles, complete UV-Vis and PL-monitored characterization of the breakdown of

  14. Aligned mesoporous architectures and devices.

    SciTech Connect

    Brinker, C. Jeffrey; Lu, Yunfeng

    2011-03-01

    This is the final report for the Presidential Early Career Award for Science and Engineering - PECASE (LDRD projects 93369 and 118841) awarded to Professor Yunfeng Lu (Tulane University and University of California-Los Angeles). During the last decade, mesoporous materials with tunable periodic pores have been synthesized using surfactant liquid crystalline as templates, opening a new avenue for a wide spectrum of applications. However, the applications are somewhat limited by the unfavorabe pore orientation of these materials. Although substantial effort has been devoted to align the pore channels, fabrication of mesoporous materials with perpendicular pore channels remains challenging. This project focused on fabrication of mesoporous materials with perpendicularly aligned pore channels. We demonstrated structures for use in water purification, separation, sensors, templated synthesis, microelectronics, optics, controlled release, and highly selective catalysts.

  15. Mesoporous carbon materials

    DOEpatents

    Dai, Sheng; Fulvio, Pasquale Fernando; Mayes, Richard T.; Wang, Xiqing; Sun, Xiao-Guang; Guo, Bingkun

    2014-09-09

    A conductive mesoporous carbon composite comprising conductive carbon nanoparticles contained within a mesoporous carbon matrix, wherein the conductive mesoporous carbon composite possesses at least a portion of mesopores having a pore size of at least 10 nm and up to 50 nm, and wherein the mesopores are either within the mesoporous carbon matrix, or are spacings delineated by surfaces of said conductive carbon nanoparticles when said conductive carbon nanoparticles are fused with each other, or both. Methods for producing the above-described composite, devices incorporating them (e.g., lithium batteries), and methods of using them, are also described.

  16. Multifunctional mesoporous silica catalyst

    DOEpatents

    Lin, Victor Shang-Yi; Tsai, Chih-Hsiang; Chen, Hung-Ting; Pruski, Marek; Kobayashi, Takeshi

    2015-03-31

    The present invention provides bifunctional silica mesoporous materials, including mesoporous silica nanoparticles ("MSN"), having pores modified with diarylammonium triflate and perfluoroaryl moieties, that are useful for the acid-catalyzed esterification of organic acids with organic alcohols.

  17. Location of laccase in ordered mesoporous materials

    NASA Astrophysics Data System (ADS)

    Mayoral, Álvaro; Gascón, Victoria; Blanco, Rosa M.; Márquez-Álvarez, Carlos; Díaz, Isabel

    2014-11-01

    The functionalization with amine groups was developed on the SBA-15, and its effect in the laccase immobilization was compared with that of a Periodic Mesoporous Aminosilica. A method to encapsulate the laccase in situ has now been developed. In this work, spherical aberration (Cs) corrected scanning transmission electron microscopy combined with high angle annular dark field detector and electron energy loss spectroscopy were applied to identify the exact location of the enzyme in the matrix formed by the ordered mesoporous solids.

  18. Location of laccase in ordered mesoporous materials

    SciTech Connect

    Mayoral, Álvaro; Gascón, Victoria; Blanco, Rosa M.; Márquez-Álvarez, Carlos; Díaz, Isabel

    2014-11-01

    The functionalization with amine groups was developed on the SBA-15, and its effect in the laccase immobilization was compared with that of a Periodic Mesoporous Aminosilica. A method to encapsulate the laccase in situ has now been developed. In this work, spherical aberration (C{sub s}) corrected scanning transmission electron microscopy combined with high angle annular dark field detector and electron energy loss spectroscopy were applied to identify the exact location of the enzyme in the matrix formed by the ordered mesoporous solids.

  19. A Single-Crystalline Mesoporous Quartz Superlattice.

    PubMed

    Matsuno, Takamichi; Kuroda, Yoshiyuki; Kitahara, Masaki; Shimojima, Atsushi; Wada, Hiroaki; Kuroda, Kazuyuki

    2016-05-10

    There has been significant interest in the crystallization of nanostructured silica into α-quartz because of its physicochemical properties. We demonstrate a single-crystalline mesoporous quartz superlattice, a silica polymorph with unprecedentedly ordered hierarchical structures on both the several tens of nanometers scale and the atomic one. The mesoporous quartz superlattice consists of periodically arranged α-quartz nanospheres whose crystalline axes are mostly oriented in an assembly. The superlattice is prepared by thermal crystallization of amorphous silica nanospheres constituting a colloidal crystal. We found that the deposition of a strong flux of Li(+) only on the surface of silica nanospheres is effective for crystallization. PMID:27060365

  20. Tailoring the Separation Behavior of Polymer-Supported Organosilica Layered-Hybrid Membranes via Facile Post-Treatment Using HCl and HN3 Vapors.

    PubMed

    Gong, Genghao; Nagasawa, Hiroki; Kanezashi, Masakoto; Tsuru, Toshinori

    2016-05-01

    A promising layered-hybrid membrane consisting of a microporous organosilica active layer deposited onto a porous polymer support was prepared via a facile sol-gel spin-coating process. Subsequently, the pore sizes and structures of the organosilica top layers on the membrane surface were tuned at mild temperature combined with vapor treatment from either hydrochloric acid (HVT) or ammonia (AVT), thereby tailoring the desalination performance of the membranes during reverse osmosis (RO) processing. The effects of HVT and AVT on the pore size, structure, and morphology of organosilica layers and on the separation performances of membranes were investigated in detail. We confirmed that both HVT and AVT processes accelerated the condensation of silanol (Si-OH) in the organosilica layer, which led to dense silica networks. The layered-hybrid membranes after HVT showed an improved salt rejection and reduced water flux, while membranes after AVT exhibited a decrease in both salt rejection and water permeability. We found that HVT gave rise to smoother and denser organosilica layers, while AVT produced large voids and formed pinholes due to Ostwald ripening. These conclusions were supported by a comparative analysis of the results obtained via FTIR, TG-MS, SPM, and RO desalination. PMID:27070105

  1. Surface-functionalized mesoporous carbon materials

    DOEpatents

    Dai, Sheng; Gorka, Joanna; Mayes, Richard T.

    2016-02-02

    A functionalized mesoporous carbon composition comprising a mesoporous carbon scaffold having mesopores in which polyvinyl polymer grafts are covalently attached, wherein said mesopores have a size of at least 2 nm and up to 50 nm. Also described is a method for producing the functionalized mesoporous composition, wherein a reaction medium comprising a precursor mesoporous carbon, vinyl monomer, initiator, and solvent is subjected to sonication of sufficient power to result in grafting and polymerization of the vinyl monomer into mesopores of the precursor mesoporous carbon. Also described are methods for using the functionalized mesoporous carbon, particularly in extracting metal ions from metal-containing solutions.

  2. Mesoporous carbon materials

    SciTech Connect

    Dai, Sheng; Wang, Xiqing

    2012-02-14

    The invention is directed to a method for fabricating a mesoporous carbon material, the method comprising subjecting a precursor composition to a curing step followed by a carbonization step, the precursor composition comprising: (i) a templating component comprised of a block copolymer, (ii) a phenolic compound or material, (iii) a crosslinkable aldehyde component, and (iv) at least 0.5 M concentration of a strong acid having a pKa of or less than -2, wherein said carbonization step comprises heating the precursor composition at a carbonizing temperature for sufficient time to convert the precursor composition to a mesoporous carbon material. The invention is also directed to a mesoporous carbon material having an improved thermal stability, preferably produced according to the above method.

  3. Mesoporous carbon materials

    DOEpatents

    Dai, Sheng; Wang, Xiqing

    2013-08-20

    The invention is directed to a method for fabricating a mesoporous carbon material, the method comprising subjecting a precursor composition to a curing step followed by a carbonization step, the precursor composition comprising: (i) a templating component comprised of a block copolymer, (ii) a phenolic compound or material, (iii) a crosslinkable aldehyde component, and (iv) at least 0.5 M concentration of a strong acid having a pKa of or less than -2, wherein said carbonization step comprises heating the precursor composition at a carbonizing temperature for sufficient time to convert the precursor composition to a mesoporous carbon material. The invention is also directed to a mesoporous carbon material having an improved thermal stability, preferably produced according to the above method.

  4. Theoretical studies on Si-C bond cleavage in organosilane precursors during polycondensation to organosilica hybrids.

    PubMed

    Shirai, Soichi; Goto, Yasutomo; Mizoshita, Norihiro; Ohashi, Masataka; Tani, Takao; Shimada, Toyoshi; Hyodo, Shi-aki; Inagaki, Shinji

    2010-05-20

    Molecular orbital theory calculations were carried out to predict the occurrence of Si-C bond cleavage in various organosilane precursors during polycondensation to organosilica hybrids under acidic and basic conditions. On the basis of proposed mechanisms for cleavage of the Si-C bonds, the proton affinity (PA) of the carbon atom at the ipso-position and the PA of the carbanion generated after Si-C cleavage were chosen as indices for Si-C bond stability under acidic and basic conditions, respectively. The indices were calculated using a density functional theory (DFT) method for model compounds of organosilane precursors (R-Si(OH)(3)) having organic groups (R) of benzene (Ph), biphenyl (Bp), terphenyl (Tph), naphthalene (Nph), N-methylcarbazole (MCz), and anthracene (Ant). The orders for the predicted stability of the Si-C bond were Ph > Nph > Bp > Ant > Tph > MCz for acidic conditions and Ph > MCz > Bp > Nph > Tph > Ant for basic conditions. These behaviors were primarily in agreement with experimental results where cleavage of the Si-C bonds occurred for Tph (both acidic and basic), MCz (acidic), and Ant (basic). The Si-C bond cleavage of organosilane precursors during polycondensation is qualitatively predicted from these indices based on our theoretical approach. PMID:20429568

  5. Solar hydrogen and solar electricity using mesoporous materials

    NASA Astrophysics Data System (ADS)

    Mahoney, Luther

    The development of cost-effective materials for effective utilization of solar energy is a major challenge for solving the energy problems that face the world. This thesis work relates to the development of mesoporous materials for solar energy applications in the areas of photocatalytic water splitting and the generation of electricity. Mesoporous materials were employed throughout the studies because of their favorable physico-chemical properties such as high surface areas and large porosities. The first project was related to the use of a cubic periodic mesoporous material, MCM-48. The studies showed that chromium loading directly affected the phase of mesoporous silica formed. Furthermore, within the cubic MCM-48 structure, the loading of polychromate species determined the concentration of solar hydrogen produced. In an effort to determine the potential of mesoporous materials, titanium dioxide was prepared using the Evaporation-Induced Self-Assembly (EISA) synthetic method. The aging period directly determined the amount of various phases of titanium dioxide. This method was extended for the preparation of cobalt doped titanium dioxide for solar simulated hydrogen evolution. In another study, metal doped systems were synthesized using the EISA procedure and rhodamine B (RhB) dye sensitized and metal doped titania mesoporous materials were evaluated for visible light hydrogen evolution. The final study employed various mesoporous titanium dioxide materials for N719 dye sensitized solar cell (DSSC) materials for photovoltaic applications. The materials were extensively characterized using powder X-ray diffraction (XRD), nitrogen physisorption, diffuse reflectance spectroscopy (DRS), UV-Vis spectroscopy, Fourier-Transform-Infrared Spectroscopy (FT-IR), Raman spectroscopy, chemisorption, photoluminescence (PL), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). In addition, photoelectrochemical measurements were completed using

  6. Mesoporous carbons and polymers

    DOEpatents

    Bell, William; Dietz, Steven

    2001-01-01

    A mesoporous material prepared by polymerizing a resorcinol/formaldehyde system from an aqueous solution containing resorcinol, formaldehyde and a surfactant and optionally pyrolyzing the polymer to form a primarily carbonaceous solid. The material has an average pore size between 4 and 75 nm and is suitable for use in liquid-phase surface limited applications, including sorbent, catalytic, and electrical applications.

  7. A facile synthesis of highly water-soluble, core-shell organo-silica nanoparticles with controllable size via sol-gel process.

    PubMed

    Du, Hongwei; Hamilton, Paul D; Reilly, Matthew A; d'Avignon, André; Biswas, Pratim; Biswas, Pramit; Ravi, Nathan

    2009-12-15

    A series of highly water-soluble organo-silica nanoparticles, ranging from 2 to 10nm in diameter, were synthesized by the cohydrolysis and copolycondensation reactions. omega-methoxy(polyethyleneoxy)propyltrimethoxysilane (PEG6-9) and hydroxymethyltriethoxysilane (HMTEOS) mixtures were catalyzed by sodium hydroxide in the presence of surfactant benzethonium chloride (BTC) with various ratios of PEG6-9/HMTEOS at room temperature. The synthesized organo-silica nanoparticles possess a core-shell structure with a core of organo-silica resulting from HMTEOS and a monolayer shell of PEG6-9. The chemo-physical characteristics of the particles were studied by gel permeation chromatography (GPC), Fourier transform infrared (FTIR) spectroscopy, (29)Si nuclear magnetic resonance (NMR), dynamic light scattering (DLS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The molecular weight and particle size of the particles increased with increasing HMTEOS molar ratios. The richest HMTEOS composition for the water-soluble particles was found to be HMTEOS:PEG6-9=80:20, where the particles had a 6nm diameter core and a 0.8nm thick shell. We propose that these water-soluble organo-silica nanoparticles will be suitable for biomedical applications. PMID:19783256

  8. Mesoporous aluminum phosphite

    SciTech Connect

    El Haskouri, Jamal; Perez-Cabero, Monica; Guillem, Carmen; Latorre, Julio; Beltran, Aurelio; Beltran, Daniel; Amoros, Pedro

    2009-08-15

    High surface area pure mesoporous aluminum-phosphorus oxide-based derivatives have been synthesized through an S{sup +}I{sup -} surfactant-assisted cooperative mechanism by means of a one-pot preparative procedure from aqueous solution and starting from aluminum atrane complexes and phosphoric and/or phosphorous acids. A soft chemical extraction procedure allows opening the pore system of the parent as-prepared materials by exchanging the surfactant without mesostructure collapse. The nature of the pore wall can be modulated from mesoporous aluminum phosphate (ALPO) up to total incorporation of phosphite entities (mesoporous aluminum phosphite), which results in a gradual evolution of the acidic properties of the final materials. While phosphate groups in ALPO act as network building blocks (bridging Al atoms), the phosphite entities become basically attached to the pore surface, what gives practically empty channels. The mesoporous nature of the final materials is confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM) and N{sub 2} adsorption-desorption isotherms. The materials present regular unimodal pore systems whose order decreases as the phosphite content increases. NMR spectroscopic results confirm the incorporation of oxo-phosphorus entities to the framework of these materials and also provide us useful information concerning the mechanism through which they are formed. - Abstract: TEM image of the mesoporous aluminum phosphite showing the hexagonal disordered pore array that is generated by using surfactant micelles as template. Also a scheme emphasizing the presence of an alumina-rich core and an ALPO-like pore surface is presented.

  9. Gyroidal mesoporous multifunctional nanocomposites via atomic layer deposition

    NASA Astrophysics Data System (ADS)

    Werner, Jörg G.; Scherer, Maik R. J.; Steiner, Ullrich; Wiesner, Ulrich

    2014-07-01

    We demonstrate the preparation of rationally designed, multifunctional, monolithic and periodically ordered mesoporous core-shell nanocomposites with tunable structural characteristics. Three-dimensionally (3D) co-continuous gyroidal mesoporous polymer monoliths are fabricated from a solution-based triblock terpolymer-resol co-assembly and used as the functional templates for the fabrication of free-standing core-shell carbon-titania composites using atomic layer deposition (ALD). The deposition depth into the torturous gyroidal nanonetwork is investigated as a function of ALD conditions and the resulting composites are submitted to different thermal treatments. Results suggest that ALD can homogenously coat mesoporous templates with well defined pore sizes below 50 nm and thicknesses above 10 μm. Structural tunability like titania shell thickness and pore size control is demonstrated. The ordered nanocomposites exhibit triple functionality; a 3D continuous conductive carbon core that is coated with a crystalline titania shell that in turn is in contact with a 3D continuous mesopore network in a compact monolithic architecture. This materials design is of interest for applications including energy conversion and storage. Gyroidal mesoporous titania monoliths can be obtained through simultaneous titania crystallization and template removal in air.We demonstrate the preparation of rationally designed, multifunctional, monolithic and periodically ordered mesoporous core-shell nanocomposites with tunable structural characteristics. Three-dimensionally (3D) co-continuous gyroidal mesoporous polymer monoliths are fabricated from a solution-based triblock terpolymer-resol co-assembly and used as the functional templates for the fabrication of free-standing core-shell carbon-titania composites using atomic layer deposition (ALD). The deposition depth into the torturous gyroidal nanonetwork is investigated as a function of ALD conditions and the resulting composites are

  10. Synthesis and characterization of mesoporous semiconductors and their energy applications

    NASA Astrophysics Data System (ADS)

    Kang, Chris Byung-hwa

    In this dissertation, we examine the structure and physical properties of mesoporous group IV materials. Two different synthetic routes were developed to synthesize mesoporous germanium powder and thin film mesoporous silicon. The structural of these materials was confirmed by various analytical techniques. The electrochemical behavior of mesoporous silicon was further explored for applications as anodes in lithium ion batteries. The thermal conductivity was also measured and the electrical conductivity was tuned for potential applications as thermoelectrics. Ordered nanostructured germanium composite materials were produced using solution-phase surfactant templating methods. Anionic germanium/surfactand frameworks with a 2-D hexagonal structure were prepared and then condensed to form zero-valent porous germanium using oxidative coupling. The majority of the cationic surfactant inside the pores can be removed, resulting in mesoporous germanium with surface areas up to 500 m2/g. Thin film of mesoporous silicon was produced from polymer template porous silica films at relatively low temperature (<700 C) using magnesium vapor as reducing agent. The final porous silicon retains its ordered cubic mesoporosity. The lithium ion cycling performance of mesoporous silicon anodes was then examined. Mesoporous silicon films formed directly on a metal current collector showed stable cycling with excellent coulomb efficiency over 3000 cycles with capacities up to 3000 mAh/g at cycling rates between 1C to 20C. The results indicate porous silicon material in this size scale can accommodate the volume expansion associated with Li alloying without cracking or loosing contact with the current collector. The thermal conductivity of mesoporous silicon was also measured using the 3 omega method. Periodic pores and grain boundaries enhance phonon scattering to dissipate thermal energy throughout the material, resulting in a decrease in the thermal conductivity by 3-5 orders of magnitude

  11. Mesoporous materials for antihydrogen production.

    PubMed

    Consolati, Giovanni; Ferragut, Rafael; Galarneau, Anne; Di Renzo, Francesco; Quasso, Fiorenza

    2013-05-01

    Antimatter is barely known by the chemist community and this article has the vocation to explain how antimatter, in particular antihydrogen, can be obtained, as well as to show how mesoporous materials could be used as a further improvement for the production of antimatter at very low temperatures (below 1 K). The first experiments with mesoporous materials highlighted in this review show very promising and exciting results. Mesoporous materials such as mesoporous silicon, mesoporous material films, pellets of MCM-41 and silica aerogel show remarkable features for antihydrogen formation. Yet, the characteristics for the best future mesoporous materials (e.g. pore sizes, pore connectivity, shape, surface chemistry) remain to be clearly identified. For now among the best candidates are pellets of MCM-41 and aerogel with pore sizes between 10 and 30 nm, possessing hydrophobic patches on their surface to avoid ice formation at low temperature. From a fundamental standpoint, antimatter experiments could help to shed light on open issues, such as the apparent asymmetry between matter and antimatter in our universe and the gravitational behaviour of antimatter. To this purpose, basic studies on antimatter are necessary and a convenient production of antimatter is required. It is exactly where mesoporous materials could be very useful. PMID:23250616

  12. Facile synthesis of yolk-shell magnetic mesoporous carbon microspheres for efficient enrichment of low abundance peptides.

    PubMed

    Wan, Hao; Qin, Hongqiang; Xiong, Zhichao; Zhang, Weibing; Zou, Hanfa

    2013-11-21

    Magnetic mesoporous carbon microspheres with a yolk-shell structure (YSMMCS) have been prepared via a new in situ carbon source strategy. The material was fabricated by two shells coated onto the Fe3O4 particles; the inner dense and thick silica shell could protect the magnetic core from harsh acidic solvents as well as induce the void between the core and the outer shell for the yolk-shell structure, while the outer organosilica shell was used as the template and carbon source for in situ preparation of a carbon shell with mesoporous structure. A C18-alkyl chain was incorporated in situ as the carbon precursor efficiently, avoiding the conventional infiltration step, which was very difficult to manipulate and time-consuming with the possibility of losing the carbon precursor. The resulting yolk-shell magnetic mesoporous carbon microspheres exhibited a high surface area (273.15 m(2) g(-1)), a large pore volume (0.31 cm(3) g(-1)), and a strong magnetic response (a saturation magnetization value of 34.57 emu g(-1)). As a result of the void between the core and the outer shell and the π-π stacking effect, adsorption capacity reached 191.64 mg g(-1) by using Rhodamine B as a standard analyte, indicating the great potential application of the material as drug carriers. Owing to the inherent hydrophobicity and high surface area, the composite material showed better performance in the enrichment of peptides than a magnetic mesoporous silica material (Fe2O3@nSiO2@mSiO2). According to the LC-MS/MS results, about 51 and 29 nonredundant peptides were identified from tryptic digests of 5 nM BSA. Additionally, taking advantage of the mesoporous structure and strong magnetic response, the material was utilized to selectively extract low abundance endogenous peptides from human serum in the presence of high abundance proteins. Based on the LC-MS/MS results, 962 endogenous peptides were obtained by 2.5 mg YSMMCS relative to 539 endogenous peptides by 5 mg Fe2O3@nSiO2@mSiO2

  13. Preparation of hybrid organic-inorganic mesoporous silicas applied to mercury removal from aqueous media: Influence of the synthesis route on adsorption capacity and efficiency.

    PubMed

    Pérez-Quintanilla, Damián; Sánchez, Alfredo; Sierra, Isabel

    2016-06-15

    New hybrid organic-inorganic mesoporous silicas were prepared by employing three different synthesis routes and mercury adsorption studies were done in aqueous media using the batch technique. The organic ligands employed for the functionalization were derivatives of 2-mercaptopyrimidine or 2-mercaptothiazoline, and the synthesis pathways used were post-synthesis, post-synthesis with surface ion-imprinting and co-condensation with ion-imprinting. The incorporation of functional groups and the presence of ordered mesopores in the organosilicas was confirmed by XRD, TEM and SEM, nitrogen adsorption-desorption isotherms, (13)C MAS-NMR, (29)Si MAS-NMR, elemental and thermogravimetric analysis. The highest adsorption capacity and selectivity observed was for the material functionalized with 2-mercaptothiazoline ligand by means the co-condensation with ion-imprinting route (1.03mmolg(-1) at pH 6). The prepared material could be potential sorbent for the extraction of this heavy metal from environmental and drinking waters. PMID:27023632

  14. Biological Activity of Mesoporous Dendrimer-Coated Titanium Dioxide: Insight on the Role of the Surface-Interface Composition and the Framework Crystallinity.

    PubMed

    Milowska, Katarzyna; Rybczyńska, Aneta; Mosiolek, Joanna; Durdyn, Joanna; Szewczyk, Eligia M; Katir, Nadia; Brahmi, Younes; Majoral, Jean-Pierre; Bousmina, Mosto; Bryszewska, Maria; El Kadib, Abdelkrim

    2015-09-16

    Hitherto, the field of nanomedicine has been overwhelmingly dominated by the use of mesoporous organosilicas compared to their metal oxide congeners. Despite their remarkable reactivity, titanium oxide-based materials have been seldom evaluated and little knowledge has been gained with respect to their "structure-biological activity" relationship. Herein, a fruitful association of phosphorus dendrimers (both "ammonium-terminated" and "phosphonate-terminated") and titanium dioxide has been performed by means of the sol-gel process, resulting in mesoporous dendrimer-coated nanosized crystalline titanium dioxide. A similar organo-coating has been reproduced using single branch-mimicking dendrimers that allow isolation of an amorphous titanium dioxide. The impact of these materials on red blood cells was evaluated by studying cell hemolysis. Next, their cytotoxicity toward B14 Chinese fibroblasts and their antimicrobial activity were also investigated. Based on their variants (cationic versus anionic terminal groups and amorphous versus crystalline titanium dioxide phase), better understanding of the role of the surface-interface composition and the nature of the framework has been gained. No noticeable discrimination was observed for amorphous and crystalline material. In contrast, hemolysis and cytotoxicity were found to be sensitive to the nature of the interface composition, with the ammonium-terminated dendrimer-coated titanium dioxide being the most hemolytic and cytotoxic material. This surface-functionalization opens the door for creating a new synergistic machineries mechanism at the cellular level and seems promising for tailoring the biological activity of nanosized organic-inorganic hybrid materials. PMID:26305597

  15. Engineered monodisperse mesoporous materials

    SciTech Connect

    Saunders, R.S.; Small, J.H.; Lagasse, R.R.; Schroeder, J.L.; Jamison, G.M.

    1997-08-01

    Porous materials technology has developed products with a wide variety of pore sizes ranging from 1 angstrom to 100`s of microns and beyond. Beyond 15{angstrom} it becomes difficult to obtain well ordered, monodisperse pores. In this report the authors describe efforts in making novel porous material having monodisperse, controllable pore sizes spanning the mesoporous range (20--500 {angstrom}). They set forth to achieve this by using unique properties associated with block copolymers--two linear homopolymers attached at their ends. Block copolymers phase separate into monodisperse mesophases. They desired to selectively remove one of the phases and leave the other behind, giving the uniform monodisperse pores. To try to achieve this the authors used ring-opening metathesis polymerization to make the block copolymers. They synthesized a wide variety of monomers and surveyed their polymers by TGA, with the idea that one phase could be made thermally labile while the other phase would be thermally stable. In the precipitated and sol-gel processed materials, they determined by porosimetry measurements that micropores, mesopores, and macropores were created. In the film processed sample there was not much porosity present. They moved to a new system that required much lower thermal treatments to thermally remove over 90% of the labile phase. Film casting followed by thermal treatment and solvent extraction produced the desired monodisperse materials (based solely on SEM results). Modeling using Density Functional Theory was also incorporated into this project. The modeling was able to predict accurately the domain size and spacing vs. molecular weight for a model system, as well as accurate interfacial thicknesses.

  16. Facile synthesis of yolk-shell magnetic mesoporous carbon microspheres for efficient enrichment of low abundance peptides

    NASA Astrophysics Data System (ADS)

    Wan, Hao; Qin, Hongqiang; Xiong, Zhichao; Zhang, Weibing; Zou, Hanfa

    2013-10-01

    Magnetic mesoporous carbon microspheres with a yolk-shell structure (YSMMCS) have been prepared via a new in situ carbon source strategy. The material was fabricated by two shells coated onto the Fe3O4 particles; the inner dense and thick silica shell could protect the magnetic core from harsh acidic solvents as well as induce the void between the core and the outer shell for the yolk-shell structure, while the outer organosilica shell was used as the template and carbon source for in situ preparation of a carbon shell with mesoporous structure. A C18-alkyl chain was incorporated in situ as the carbon precursor efficiently, avoiding the conventional infiltration step, which was very difficult to manipulate and time-consuming with the possibility of losing the carbon precursor. The resulting yolk-shell magnetic mesoporous carbon microspheres exhibited a high surface area (273.15 m2 g-1), a large pore volume (0.31 cm3 g-1), and a strong magnetic response (a saturation magnetization value of 34.57 emu g-1). As a result of the void between the core and the outer shell and the π-π stacking effect, adsorption capacity reached 191.64 mg g-1 by using Rhodamine B as a standard analyte, indicating the great potential application of the material as drug carriers. Owing to the inherent hydrophobicity and high surface area, the composite material showed better performance in the enrichment of peptides than a magnetic mesoporous silica material (Fe2O3@nSiO2@mSiO2). According to the LC-MS/MS results, about 51 and 29 nonredundant peptides were identified from tryptic digests of 5 nM BSA. Additionally, taking advantage of the mesoporous structure and strong magnetic response, the material was utilized to selectively extract low abundance endogenous peptides from human serum in the presence of high abundance proteins. Based on the LC-MS/MS results, 962 endogenous peptides were obtained by 2.5 mg YSMMCS relative to 539 endogenous peptides by 5 mg Fe2O3@nSiO2@mSiO2, confirming the

  17. Mesoporous Silicate Materials in Sensing

    PubMed Central

    Melde, Brian J.; Johnson, Brandy J.; Charles, Paul T.

    2008-01-01

    Mesoporous silicas, especially those exhibiting ordered pore systems and uniform pore diameters, have shown great potential for sensing applications in recent years. Morphological control grants them versatility in the method of deployment whether as bulk powders, monoliths, thin films, or embedded in coatings. High surface areas and pore sizes greater than 2 nm make them effective as adsorbent coatings for humidity sensors. The pore networks also provide the potential for immobilization of enzymes within the materials. Functionalization of materials by silane grafting or through co-condensation of silicate precursors can be used to provide mesoporous materials with a variety of fluorescent probes as well as surface properties that aid in selective detection of specific analytes. This review will illustrate how mesoporous silicas have been applied to sensing changes in relative humidity, changes in pH, metal cations, toxic industrial compounds, volatile organic compounds, small molecules and ions, nitroenergetic compounds, and biologically relevant molecules.

  18. Reversible and Precise Self-Assembly of Janus Metal-Organosilica Nanoparticles through a Linker-Free Approach.

    PubMed

    Hu, Huicheng; Ji, Fei; Xu, Yong; Yu, Jiaqi; Liu, Qipeng; Chen, Lei; Chen, Qian; Wen, Peng; Lifshitz, Yeshayahu; Wang, Yan; Zhang, Qiao; Lee, Shuit-Tong

    2016-08-23

    Reversible self-assembly of nanoparticles into ordered structures is essential for both fundamental study and practical applications. Although extensive work has been conducted, the demand for simple, cheap, reversible, and versatile ordering methods is still a central issue in current nanoscience and nanotechnology. Here we report a reversible and precise self-assembly of nanoparticles through a linker-free and fast approach by manipulating the interparticle forces, e.g., van der Waals (VDW) force and electrostatic force. Because VDW force is nondirectional, an oriented interaction is achieved to induce the directional binding of nanoparticles utilizing the Janus nanostructure. An effective sol-gel approach has been developed to synthesize metal-organosilica Janus nanoparticles. Dimers and trimers can be obtained by tuning the steric hindrance. After assembly, "hot-spots" can be generated between adjacent nanoparticles, and dramatic enhancement has been observed in surface-enhanced Raman scattering. The present strategy overcomes several limitations of existing approaches and allows the controlled assembly of small particles into various structures. PMID:27392069

  19. Site-selective electroless metallization on porous organosilica films by multisurface modification of alkyl monolayer and vacuum plasma.

    PubMed

    Chen, Giin-Shan; Chen, Sung-Te; Chen, Yenying W; Hsu, Yen-Che

    2013-01-15

    Taking plasma-enhanced chemical vapor deposited porous SiOCH (p-SiOCH) and octadecyltrichlorosilane (OTS) as model cases, this study elucidates the chemical reaction pathways for alkyl-based self-assembled monolayers (SAMs) on porous carbon-doped organosilica films under N(2)-H(2) vacuum plasma illumination. In contrast to previous findings that carboxylic groups are found in alkyl-based SAMs only by exposure to oxygen-based plasma, this study discovers that, upon exposure to reductive nitrogen-based vacuum plasma, surface carboxylic functional groups can be instantly formed on OTS-coated p-SiOCH films. Particular attention is given to developing a multisurface modification process, starting with the modification of p-SiOCH films by N(2)-H(2) plasma and continuing with SAM deposition and plasma patterning; this ultimately leads to site-selective seeding for the spatially controlled fabrication of Cu-wire metallization by electroless deposition. Plasma diagnosis and X-ray near-edge absorption and Fourier transform infrared spectroscopies show that, by adequately controlling the plasma parameters, the bulk of the p-SiOCH films are free from plasma damage (in terms of degradation in bonding structures and electrical properties); the formation of the seed-trapping carboxylic functional groups on the surface, the key factor for the validity of this new seeding process, is due to a water-mediated chemical oxygenation route. PMID:23205708

  20. Single crystalline mesoporous silicon nanowires

    SciTech Connect

    Hochbaum, Allon; Dargas, Daniel; Hwang, Yun Jeong; Yang, Peidong

    2009-08-18

    Herein we demonstrate a novel electroless etching synthesis of monolithic, single-crystalline, mesoporous silicon nanowire arrays with a high surface area and luminescent properties consistent with conventional porous silicon materials. The photoluminescence of these nanowires suggest they are composed of crystalline silicon with small enough dimensions such that these arrays may be useful as photocatalytic substrates or active components of nanoscale optoelectronic devices. A better understanding of this electroless route to mesoporous silicon could lead to facile and general syntheses of different narrow bandgap semiconductor nanostructures for various applications.

  1. Large-scale template-free synthesis of ordered mesoporous platinum nanocubes and their electrocatalytic properties

    NASA Astrophysics Data System (ADS)

    Cao, Yanqin; Yang, Yong; Shan, Yufeng; Fu, Chaoli; Viet Long, Nguyen; Huang, Zhengren; Guo, Xiangxin; Nogami, Masayuki

    2015-11-01

    Here we report a facile, one-pot and template-free approach to synthesize mesoporous monocrystalline Pt nanocubes with uniform shapes and sizes, in which small Pt particles with a size of ~5 nm are three-dimensionally and periodically built up into cubes with a size of ~50 nm. The forming process is illustrated through a novel meso-crystal self-assembly mechanism. Very interestingly, the mesoporous structures are ordered, which are thought to be beneficial to increase their catalytic activity. Compared with nonporous Pt nanoparticles and porous Pt nanoparticles without order, the ordered mesoporous Pt nanocubes exhibit a highly improved electrocatalytic ability for methanol and formic acid oxidation, and are potentially applicable as electrocatalysts for direct methanol and formic acid fuel cells. Furthermore, this approach can be used to synthesize other Pt-series metallic mesoporous nanoparticles, such as Pd.Here we report a facile, one-pot and template-free approach to synthesize mesoporous monocrystalline Pt nanocubes with uniform shapes and sizes, in which small Pt particles with a size of ~5 nm are three-dimensionally and periodically built up into cubes with a size of ~50 nm. The forming process is illustrated through a novel meso-crystal self-assembly mechanism. Very interestingly, the mesoporous structures are ordered, which are thought to be beneficial to increase their catalytic activity. Compared with nonporous Pt nanoparticles and porous Pt nanoparticles without order, the ordered mesoporous Pt nanocubes exhibit a highly improved electrocatalytic ability for methanol and formic acid oxidation, and are potentially applicable as electrocatalysts for direct methanol and formic acid fuel cells. Furthermore, this approach can be used to synthesize other Pt-series metallic mesoporous nanoparticles, such as Pd. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr05772h

  2. Magnetic mesoporous material for the sequestration of algae

    SciTech Connect

    Trewyn, Brian G.; Kandel, Kapil; Slowing, Igor Ivan; Lee, Show-Ling

    2014-09-09

    The present invention provides a magnetic mesoporous nanoparticle that includes a mesoporous silicate nanoparticle and iron oxide. The present invention also provides a method of using magnetic mesoporous nanoparticles to sequester microorganisms from a media.

  3. Bimodal mesoporous silica with bottleneck pores.

    PubMed

    Reber, M J; Brühwiler, D

    2015-11-01

    Bimodal mesoporous silica consisting of two sets of well-defined mesopores is synthesized by a partial pseudomorphic transformation of an ordered mesoporous starting material (SBA-15 type). The introduction of a second set of smaller mesopores (MCM-41 type) establishes a pore system with bottlenecks that restricts the access to the core of the bimodal mesoporous silica particles. The particle size and shape of the starting material are retained, but micropores present in the starting material disappear during the transformation, leading to a true bimodal mesoporous product. A varying degree of transformation allows the adjustment of the pore volume contribution of the two mesopore domains. Information on the accessibility of the mesopores is obtained by the adsorption of fluorescence-labeled poly(amidoamine) dendrimers and imaging by confocal laser scanning microscopy. This information is correlated with nitrogen sorption data to provide insights regarding the spatial distribution of the two mesopore domains. The bimodal mesoporous materials are excellent model systems for the investigation of cavitation effects in nitrogen desorption isotherms. PMID:26399172

  4. Mesoporous Silicon-Based Anodes

    NASA Technical Reports Server (NTRS)

    Peramunage, Dharmasena

    2015-01-01

    For high-capacity, high-performance lithium-ion batteries. A new high-capacity anode composite based on mesoporous silicon is being developed. With a structure that resembles a pseudo one-dimensional phase, the active anode material will accommodate significant volume changes expected upon alloying and dealloying with lithium (Li).

  5. THE BIOCOMPATIBILITY OF MESOPOROUS SILICATES

    PubMed Central

    Hudson, Sarah; Padera, Robert F.; Langer, Robert; Kohane, Daniel S.

    2008-01-01

    Micro- and nano- mesoporous silicate particles are considered potential drug delivery systems because of their ordered pore structures, large surface areas and the ease with which they can be chemically modified. However, few cytotoxicity or biocompatibility studies have been reported, especially when silicates are administered in the quantities necessary to deliver low-potency drugs. The biocompatibility of mesoporous silicates of particle sizes ~ 150 nm, ~ 800 nm and ~ 4 µm and pore sizes of 3 nm, 7 nm and 16 nm respectively are examined here. In vitro, mesoporous silicates showed a significant degree of toxicity at high concentrations with mesothelial cells. Following subcutaneous injection of silicates in rats, the amount of residual material decreased progressively over three months, with good biocompatibility on histology at all time points. In contrast, intra peritoneal and intra venous injections in mice resulted in death or euthanasia. No toxicity was seen with subcutaneous injection of the same particles in mice. Microscopic analysis of the lung tissue of the mice indicates that death may be due to thrombosis. Although local tissue reaction to mesoporous silicates was benign, they caused severe systemic toxicity. This toxicity could be mitigated by modification of the materials. PMID:18675454

  6. Synthesis and characterization of mesoporous materials

    NASA Astrophysics Data System (ADS)

    Cheng, Wei

    Mesoporous materials are highly porous solids with pore sizes in the range of 20 to 500 A and a narrow pore size distribution. Creating a mesoporous morphology in transition metal oxides is expected to increase the kinetics of electrochemical photoelectrochemical processes due to the improved accessibility of electrolyte to electrode. The objective of the dissertation research is to prepare functional mesoporous materials based on transition metal oxides and to determine the effects of the mesoporous structure on the resulting charge transfer, electrochromism, and optical properties. In this dissertation, mesoporous tungsten oxide and niobium oxide were synthesized by incorporating tri-block copolymer surfactant templates into the sol-gel synthesis procedure. Both mesoporous materials have surface areas in the range of 130 m2/g with a narrow pore size distribution centered at ˜45A. Their electrochromic properties were characterized and found to be strongly influenced by the mesoporous morphology. Both mesoporous systems exhibit better electrochemical and optical reversibilities than the analogous sol-gel materials (without using surfactant) and the kinetics of bleaching is substantially faster. Coloration efficiencies for the mesoporous tungsten oxide and niobium oxide films are in the range of 16--37 cm 2/C and 12--16 cm2/C, respectively. Dye sensitized solar cells (DSSC) were fabricated using mesoporous niobium oxide as electrodes. Due to the higher surface area, the mesoporous electrodes have greater dye adsorption and electrolyte penetration compared to sol-gel electrodes, which leads to better electron injection, faster dye regeneration and thus, better cell performance. The mesoporous DSSC exhibits photocurrents of 2.9 mA and fill factors of 0.61. Open circuit voltages of the mesoporous DSSC are in the range of 0.6--0.83V.

  7. Mesoporous metal oxide graphene nanocomposite materials

    DOEpatents

    Liu, Jun; Aksay, Ilhan A.; Kou, Rong; Wang, Donghai

    2016-05-24

    A nanocomposite material formed of graphene and a mesoporous metal oxide having a demonstrated specific capacity of more than 200 F/g with particular utility when employed in supercapacitor applications. A method for making these nanocomposite materials by first forming a mixture of graphene, a surfactant, and a metal oxide precursor, precipitating the metal oxide precursor with the surfactant from the mixture to form a mesoporous metal oxide. The mesoporous metal oxide is then deposited onto a surface of the graphene.

  8. Mesoporous Silica: A Suitable Adsorbent for Amines

    PubMed Central

    2009-01-01

    Mesoporous silica with KIT-6 structure was investigated as a preconcentrating material in chromatographic systems for ammonia and trimethylamine. Its adsorption capacity was compared to that of existing commercial materials, showing its increased adsorption power. In addition, KIT-6 mesoporous silica efficiently adsorbs both gases, while none of the employed commercial adsorbents did. This means that KIT-6 Mesoporous silica may be a good choice for integrated chromatography/gas sensing micro-devices. PMID:20628459

  9. Synthesis of non-siliceous mesoporous oxides.

    PubMed

    Gu, Dong; Schüth, Ferdi

    2014-01-01

    Mesoporous non-siliceous oxides have attracted great interest due to their unique properties and potential applications. Since the discovery of mesoporous silicates in 1990s, organic-inorganic assembly processes by using surfactants or block copolymers as soft templates have been considered as a feasible path for creating mesopores in metal oxides. However, the harsh sol-gel conditions and low thermal stabilities have limited the expansion of this method to various metal oxide species. Nanocasting, using ordered mesoporous silica or carbon as a hard template, has provided possibilities for preparing novel mesoporous materials with new structures, compositions and high thermal stabilities. This review concerns the synthesis, composition, and parameter control of mesoporous non-siliceous oxides. Four synthesis routes, i.e. soft-templating (surfactants or block copolymers as templates), hard-templating (mesoporous silicas or carbons as sacrificial templates), colloidal crystal templating (3-D ordered colloidal particles as a template), and super lattice routes, are summarized in this review. Mesoporous metal oxides with different compositions have different properties. Non-siliceous mesoporous oxides are comprehensively described, including a discussion of constituting elements, synthesis, and structures. General aspects concerning pore size control, atomic scale crystallinity, and phase control are also reviewed. PMID:23942521

  10. Cellular membrane trafficking of mesoporous silica nanoparticles

    SciTech Connect

    Fang, I-Ju

    2012-01-01

    This dissertation mainly focuses on the investigation of the cellular membrane trafficking of mesoporous silica nanoparticles. We are interested in the study of endocytosis and exocytosis behaviors of mesoporous silica nanoparticles with desired surface functionality. The relationship between mesoporous silica nanoparticles and membrane trafficking of cells, either cancerous cells or normal cells was examined. Since mesoporous silica nanoparticles were applied in many drug delivery cases, the endocytotic efficiency of mesoporous silica nanoparticles needs to be investigated in more details in order to design the cellular drug delivery system in the controlled way. It is well known that cells can engulf some molecules outside of the cells through a receptor-ligand associated endocytosis. We are interested to determine if those biomolecules binding to cell surface receptors can be utilized on mesoporous silica nanoparticle materials to improve the uptake efficiency or govern the mechanism of endocytosis of mesoporous silica nanoparticles. Arginine-glycine-aspartate (RGD) is a small peptide recognized by cell integrin receptors and it was reported that avidin internalization was highly promoted by tumor lectin. Both RGD and avidin were linked to the surface of mesoporous silica nanoparticle materials to investigate the effect of receptor-associated biomolecule on cellular endocytosis efficiency. The effect of ligand types, ligand conformation and ligand density were discussed in Chapter 2 and 3. Furthermore, the exocytosis of mesoporous silica nanoparticles is very attractive for biological applications. The cellular protein sequestration study of mesoporous silica nanoparticles was examined for further information of the intracellular pathway of endocytosed mesoporous silica nanoparticle materials. The surface functionality of mesoporous silica nanoparticle materials demonstrated selectivity among the materials and cancer and normal cell lines. We aimed to determine

  11. Magnetic Mesoporous Photonic Cellulose Films.

    PubMed

    Giese, Michael; Blusch, Lina K; Schlesinger, Maik; Meseck, Georg R; Hamad, Wadood Y; Arjmand, Mohammad; Sundararaj, Uttandaraman; MacLachlan, Mark J

    2016-09-13

    Novel hybrid materials of cellulose and magnetic nanoparticles (NPs) were synthesized and characterized. The materials combine the chiral nematic structural features of mesoporous photonic cellulose (MPC) with the magnetic properties of cobalt ferrite (CoFe2O4). The photonic, magnetic, and dielectric properties of the hybrid materials were investigated during the dynamic swelling and deswelling of the MPC films. It was observed that the dielectric properties of the generated MPC films increased tremendously following swelling in water, endorsing efficient swelling ability of the generated mesoporous films. The high magnetic permeability of the developed MPC films in conjunction with their superior dielectric properties, predominantly in the swollen state, makes them interesting for electromagnetic interference shielding applications. PMID:27588561

  12. Mesoporous carbonates and method of making

    DOEpatents

    Fryxell, Glen; Liu, Jun; Zemanian, Thomas S.

    2004-06-15

    Mesoporous metal carbonate structures are formed by providing a solution containing a non-ionic surfactant and a calcium acetate salt, adding sufficient base to react with the acidic byproducts to be formed by the addition of carbon dioxide, and adding carbon dioxide, thereby forming a mesoporous metal carbonate structure containing the metal from said metal salt.

  13. Synthesis of hollow and mesoporous polycaprolactone nanocapsules,

    NASA Astrophysics Data System (ADS)

    Paik, Pradip; Zhang, Yong

    2011-05-01

    New polycaprolactone (PCL) nanocapsules with a hollow core and mesoporous shell have been synthesized. The PCL nanocapsules have an average size of about 100nm and a mesopores shell of about 20nm. The size of the mesopores on the shell is about 4nm. Fluorescent dye Rhodamin 6G was loaded into the nanocapsules to demonstrate the mesoporous structure of the capsules and their ability to load small molecules. The nanocapsules with such a structure can be used in many areas for various applications such as drug and gene delivery.New polycaprolactone (PCL) nanocapsules with a hollow core and mesoporous shell have been synthesized. The PCL nanocapsules have an average size of about 100nm and a mesopores shell of about 20nm. The size of the mesopores on the shell is about 4nm. Fluorescent dye Rhodamin 6G was loaded into the nanocapsules to demonstrate the mesoporous structure of the capsules and their ability to load small molecules. The nanocapsules with such a structure can be used in many areas for various applications such as drug and gene delivery. Dr. Pradip Paik is currently an assistant professor at the University of Hyderabad (Central University), India.

  14. Non-destructively shattered mesoporous silica for protein drug delivery

    SciTech Connect

    Lei, Chenghong; Chen, Baowei; Li, Xiaolin; Qi, Wen N.; Liu, Jun

    2013-07-15

    Mesoporous silicas have been extensively used for entrapping small chemical molecules and biomacromolecules. We hypothesize that the loading density of biomacromlecules such as proteins in mesoporous silicas could be limited due to mesopore disorderness and depth because of some pore volume inaccessible. We innovatively shattered mesoporous silicas resulting in reduced particle sizes and improved intramesoporous structures in aqueous solution by a powerful sonication, where the mesoporous structures were still well maintained. The sonication-shattered mesoporous silicas can allow protein loading densities to be increased by more than 170%, demonstrating that significantly more mesoporous room of the silicas could become accessible for biomacromolecule loading after the sonication-shattering.

  15. Single crystalline mesoporous silicon nanowires

    SciTech Connect

    Hochbaum, A.I.; Gargas, Daniel; Jeong Hwang, Yun; Yang, Peidong

    2009-08-04

    Herein we demonstrate a novel electroless etching synthesis of monolithic, single-crystalline, mesoporous silicon nanowire arrays with a high surface area and luminescent properties consistent with conventional porous silicon materials. These porous nanowires also retain the crystallographic orientation of the wafer from which they are etched. Electron microscopy and diffraction confirm their single-crystallinity and reveal the silicon surrounding the pores is as thin as several nanometers. Confocal fluorescence microscopy showed that the photoluminescence (PL) of these arrays emanate from the nanowires themselves, and their PL spectrum suggests that these arrays may be useful as photocatalytic substrates or active components of nanoscale optoelectronic devices.

  16. Synthesis and characterization of mesoporous zirconia and aluminated mesoporous zirconia

    NASA Astrophysics Data System (ADS)

    Zhao, Elizabeth Sun

    Synthesis of mesoporous zirconia has been performed by slowly hydrolyzing zirconium propoxide in the presence of anionic surfactants: namely, dodecyl phosphate or sulfate (P12 and Sf12) and hexadecyl sulfonate (So16) The zirconia. outgassed at 140--150°C has T-plot surface areas higher than 400 M2/g. This outgassing does not remove the surfactant. After calcination in air at 500°C and combustion of the surfactant, the mesoporous volume is reduced by a factor of about 2, whereas the pore wall material crystallizes in the tetragonal phase. The high-resolution electron microscopic study reveals the presence of a disorganized network of polygonal pores structure. It is suggested that the chemistry of the hydrolysis solution is instrumental in determining the pore structure. A schematic model in which the surfactant is a scaffold component is suggested in order to explain these results and the fixation of PO4, or SO4 in the walls may help to preserve the porous structure. It is very different from the templating mechanism. From the density obtained from phase transition temperature, and from the mesoporous volume (N2 adsorption), the thickness of the wall can be calculated as well as the pseudo-length of the pores. From the thickness, the T-plot area can be recalculated and agrees well with the measured T-plot surface area for the sample calcined at 500°C. Around 900°C, the walls become thicker and crystallizes into monoclinic zirconia without pore structure. In order to try to modify, the acidity of the mesoporous sulfated and oxo-phosphated zirconia, they were doped with aluminum. The sulfated zirconia only has a coating layer of amorphous alumina, while the phosphated zirconia has aluminum in the lattice and the alumina coat. A maximum ratio of Al/Zr ˜ 0.04 can be reached in the lattice. The introduction of aluminum into the lattice prevents the crystallization of the oxo-phosphate at 900°C, and helps to preserve the surface area and porosity of the sulfated

  17. Block copolymer self-assembly–directed synthesis of mesoporous gyroidal superconductors

    PubMed Central

    Robbins, Spencer W.; Beaucage, Peter A.; Sai, Hiroaki; Tan, Kwan Wee; Werner, Jörg G.; Sethna, James P.; DiSalvo, Francis J.; Gruner, Sol M.; Van Dover, Robert B.; Wiesner, Ulrich

    2016-01-01

    Superconductors with periodically ordered mesoporous structures are expected to have properties very different from those of their bulk counterparts. Systematic studies of such phenomena to date are sparse, however, because of a lack of versatile synthetic approaches to such materials. We demonstrate the formation of three-dimensionally continuous gyroidal mesoporous niobium nitride (NbN) superconductors from chiral ABC triblock terpolymer self-assembly–directed sol-gel–derived niobium oxide with subsequent thermal processing in air and ammonia gas. Superconducting materials exhibit a critical temperature (Tc) of about 7 to 8 K, a flux exclusion of about 5% compared to a dense NbN solid, and an estimated critical current density (Jc) of 440 A cm−2 at 100 Oe and 2.5 K. We expect block copolymer self-assembly–directed mesoporous superconductors to provide interesting subjects for mesostructure-superconductivity correlation studies. PMID:27152327

  18. Block copolymer self-assembly-directed synthesis of mesoporous gyroidal superconductors.

    PubMed

    Robbins, Spencer W; Beaucage, Peter A; Sai, Hiroaki; Tan, Kwan Wee; Werner, Jörg G; Sethna, James P; DiSalvo, Francis J; Gruner, Sol M; Van Dover, Robert B; Wiesner, Ulrich

    2016-01-01

    Superconductors with periodically ordered mesoporous structures are expected to have properties very different from those of their bulk counterparts. Systematic studies of such phenomena to date are sparse, however, because of a lack of versatile synthetic approaches to such materials. We demonstrate the formation of three-dimensionally continuous gyroidal mesoporous niobium nitride (NbN) superconductors from chiral ABC triblock terpolymer self-assembly-directed sol-gel-derived niobium oxide with subsequent thermal processing in air and ammonia gas. Superconducting materials exhibit a critical temperature (T c) of about 7 to 8 K, a flux exclusion of about 5% compared to a dense NbN solid, and an estimated critical current density (J c) of 440 A cm(-2) at 100 Oe and 2.5 K. We expect block copolymer self-assembly-directed mesoporous superconductors to provide interesting subjects for mesostructure-superconductivity correlation studies. PMID:27152327

  19. Surfactant-Templated Mesoporous Metal Oxide Nanowires

    DOE PAGESBeta

    Luo, Hongmei; Lin, Qianglu; Baber, Stacy; Naalla, Mahesh

    2010-01-01

    We demore » monstrate two approaches to prepare mesoporous metal oxide nanowires by surfactant assembly and nanoconfinement via sol-gel or electrochemical deposition. For example, mesoporous Ta 2 O 5 and zeolite nanowires are prepared by block copolymer Pluronic 123-templated sol-gel method, and mesoporous ZnO nanowires are prepared by electrodeposition in presence of anionic surfactant sodium dodecyl sulfate (SDS) surfactant, in porous membranes. The morphologies of porous nanowires are studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses.« less

  20. Drug Loading of Mesoporous Silicon

    NASA Astrophysics Data System (ADS)

    Moffitt, Anne; Coffer, Jeff; Wang, Mengjia

    2011-03-01

    The nanostructuring of crystalline solids with low aqueous solubilities by their incorporation into mesoporous host materials is one route to improve the bioavailability of such solids. Earlier studies suggest that mesoporous Si (PSi), with pore widths in the range of 5-50 nm, is a candidate for such an approach. In this presentation, we describe efforts to load curcumin into free-standing microparticles of PSi. Curcumin is a compound extracted from turmeric root, which is an ingredient of curry. Curucmin has shown activity against selected cancer cell lines, bacteria, and other medical conditions. However, curcumin has a very low bioavailability due to its extremely low water solubility (0.6 μ g/mL). Incorporation of curcumin was achieved by straightforward loading of the molten solid at 185circ; C. Loading experiments were performed using PSi particles of two different size ranges, 45-75 μ m and 150-250 μ m. Longer loading times and ratio of curcumin to PSi leads to a higher percentage of loaded curcumin in both PSi particle sizes (as determined by weight difference). The extent of curcumin crystallinity was assessed by x-ray diffraction (XRD). The solubility and release kinetics of loaded curcumin from the PSi was determined by extraction into water at 37circ; C, with analysis using UV-VIS spectrometry. NSF-REU and TCU.

  1. Sample Desorption/Onization From Mesoporous Silica

    DOEpatents

    Iyer, Srinivas; Dattelbaum, Andrew M.

    2005-10-25

    Mesoporous silica is shown to be a sample holder for laser desorption/ionization of mass spectrometry. Supported mesoporous silica was prepared by coating an ethanolic silicate solution having a removable surfactant onto a substrate to produce a self-assembled, ordered, nanocomposite silica thin film. The surfactant was chosen to provide a desired pore size between about 1 nanometer diameter and 50 nanometers diameter. Removal of the surfactant resulted in a mesoporous silica thin film on the substrate. Samples having a molecular weight below 1000, such as C.sub.60 and tryptophan, were adsorbed onto and into the mesoporous silica thin film sample holder and analyzed using laser desorption/ionization mass spectrometry.

  2. Mesoporous Carbon Membranes for Selective Gas Separations

    SciTech Connect

    2009-04-01

    This factsheet describes a study whose focus is on translating a novel class of material developed at Oak Ridge National Laboratory—selfassembled mesoporous carbon—into robust, efficient membrane systems for selective industrial gas separations.

  3. Synthesis of mesoporous silica nanoparticles.

    PubMed

    Wu, Si-Han; Mou, Chung-Yuan; Lin, Hong-Ping

    2013-05-01

    Good control of the morphology, particle size, uniformity and dispersity of mesoporous silica nanoparticles (MSNs) is of increasing importance to their use in catalyst, adsorption, polymer filler, optical devices, bio-imaging, drug delivery, and biomedical applications. This review discusses different synthesis methodologies to prepare well-dispersed MSNs and hollow silica nanoparticles (HSNs) with tunable dimensions ranging from a few to hundreds of nanometers of different mesostructures. The methods include fast self-assembly, soft and hard templating, a modified Stöber method, dissolving-reconstruction and modified aerogel approaches. In practical applications, the MSNs prepared by these methods demonstrate good potential for use in high-performance catalysis, antireflection coating, transparent polymer-MSNs nanocomposites, drug-release and theranostic systems. PMID:23403864

  4. Preparation of irregular mesoporous hydroxyapatite

    SciTech Connect

    Wang Hualin Zhai Linfeng; Li Yanhong; Shi Tiejun

    2008-06-03

    An irregular mesoporous hydroxyapatite (meso-HA), Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2}, is successfully prepared from Ca(NO{sub 3}){sub 2}.4H{sub 2}O and NH{sub 4}H{sub 2}PO{sub 4} using surfactant cetyltrimethyl ammonium bromide (CTAB) as template. Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) results reveal that the positive head of CTAB is assembled on the surface precipitated HA and much NH{sub 4}{sup +} is enclosed in precipitated HA before calcination. Field scanning electron microscope (FSEM) reveals that there exist many interconnected pores throughout the HA reticular skeleton. Nitrogen adsorption-desorption experiment exhibits a mesoporous material type IV curve, and pore size distribution calculated from the desorption branch of the isotherms based on Barrett-Joyner-Halenda (BJH) model shows that most pores throughout the HA reticular skeleton are sized at about 40 nm, but the pores are not uniform on the whole, owning to decomposition of the 'organic' CTAB templating structures and ammonium salt enclosed in the precipitated HA. The specific surface area of irregular meso-HA is calculated to be 37.6 m{sup 2}/g according to the Brunauer-Emmett-Teller (BET) equation. Moreover, after polylactic acid/meso-HA (PLA/meso-HA) composites degraded 12 weeks in normal saline at 37 deg. C, the interconnected pores throughout the HA skeleton were enlarged and sized in micron degree, which resemble trabecular bone structure very much.

  5. Luminescent mesoporous nanoreservoirs for the effective loading and intracellular delivery of therapeutic drugs.

    PubMed

    Kwon, Sooyeon; Singh, Rajendra K; Kim, Tae-Hyun; Patel, Kapil D; Kim, Jung-Ju; Chrzanowski, Wojciech; Kim, Hae-Won

    2014-03-01

    Development of biocompatible and multifunctional nanocarriers is important for the therapeutic efficacy of drug molecules in the treatment of disease and tissue repair. A novel nanocarrier of luminescent hollowed mesoporous silica (L-hMS) was explored for the loading and controlled delivery of drugs. For the synthesis of L-hMS, self-activated luminescence hydroxyapatite (LHA) was used as a template. Different thicknesses (∼ 7-62 nm) of mesoporous silica shell were obtained by varying the volume of silica precursor and the subsequent removal of the LHA core, which resulted in hollow-cored (size of ∼ 40 nm × 10 nm) mesoporous silica nanoreservoirs, L-hMS. While the silica shell provided a highly mesoporous structure, enabling an effective loading of drug molecules, the luminescent property of LHA was also well preserved in both the silica-shelled and the hollow-cored nanocarriers. Doxorubicin (DOX), used as a model drug, was shown to be effectively loaded onto the mesopore structure and within the hollow space of the nanoreservoir. The DOX release was fairly pH-dependent, occurring more rapidly at pH 5.3 than at pH 7.4, and a long-term sustainable delivery over the test period of 2weeks was observed. The nanoreservoir exhibited favorable cell compatibility with low cytotoxicity and excellent cell uptake efficiency (over 90%). Treatment of HeLa cells with DOX-loaded L-hMS elicited a sufficient degree of biological efficacy of DOX, as confirmed in the DOX-induced apoptotic behaviors, including stimulation in caspase-3 expression, and was even more effective than the direct DOX treatment. Overall, the newly developed L-hMS nanoreservoirs may be potentially useful as a multifunctional (luminescent, mesoporous and biocompatible) carrier system to effectively load and sustainably deliver small molecules, including anticancer drugs. PMID:24239681

  6. Hollow mesoporous silica nanoparticles for intracellular delivery of fluorescent dye

    PubMed Central

    2011-01-01

    In this study, hollow mesoporous silica nanoparticles (HMSNs) were synthesized using the sol-gel/emulsion approach and its potential application in drug delivery was assessed. The HMSNs were characterized, by transmission electron microscopy (TEM), Scanning Electron Microscopy (SEM), nitrogen adsorption/desorption and Brunauer-Emmett-Teller (BET), to have a mesoporous layer on its surface, with an average pore diameter of about 2 nm and a surface area of 880 m2/g. Fluorescein isothiocyanate (FITC) loaded into these HMSNs was used as a model platform to assess its efficacy as a drug delivery tool. Its release kinetic study revealed a sequential release of FITC from the HMSNs for over a period of one week when soaked in inorganic solution, while a burst release kinetic of the dye was observed just within a few hours of soaking in organic solution. These FITC-loaded HMSNs was also found capable to be internalized by live human cervical cancer cells (HeLa), wherein it was quickly released into the cytoplasm within a short period of time after intracellular uptake. We envision that these HMSNs, with large pores and high efficacy to adsorb chemicals such as the fluorescent dye FITC, could serve as a delivery vehicle for controlled release of chemicals administered into live cells, opening potential to a diverse range of applications including drug storage and release as well as metabolic manipulation of cells. PMID:21208421

  7. A highly ordered cubic mesoporous silica/graphene nanocomposite.

    PubMed

    Lee, Chang-Wook; Roh, Kwang Chul; Kim, Kwang-Bum

    2013-10-21

    A highly ordered cubic mesoporous silica (KIT-6)/graphene nanocomposite and 2D KIT-6 nanoflakes were synthesized using a novel synthesis methodology. The non-ionic triblock copolymer, P123, played a dual role as a structure-directing agent in the formation of the cubic mesoporous structure and as a cross-linking agent between mesoporous silica and graphene. The prepared (KIT-6)/graphene nanocomposite could act as a template for the preparation of mesoporous material/graphene nanocomposites. PMID:24057016

  8. Facile mesoporous template-assisted hydrothermal synthesis of ordered mesoporous magnesium silicate as an efficient adsorbent

    NASA Astrophysics Data System (ADS)

    Lu, Qingshan; Li, Qiang; Zhang, Jingjing; Li, Jingfeng; Lu, Jinhua

    2016-01-01

    Mesoporous materials with unique structure as well as special morphology have potential applications in pollutant adsorption. In this work, using mesoporous silica SBA-15 filled with carbon (C@SBA-15) as both silicon source and assisted template, the ordered mesoporous magnesium silicate (Mg3Si4O9(OH)4) has been fabricated at 140 °C by a novel and facile hydrothermal method. During the hydrothermal process, the magnesium silicate grew along the silica walls at the expense of consuming silica and deposited on the carbon surface of the C@SBA-15. Meanwhile, the rigid carbon inside the pores of the SBA-15 supported the magnesium silicate as mesoporous walls under hydrothermal condition. The obtained magnesium silicate possessed ordered mesoporous structure, high specific surface area of 446 m2/g, large pore volume of 0.84 cm3/g, and hierarchical structure assembled with ultrathin nanosheets of 15 nm in thickness. These characteristics endow the ordered mesoporous magnesium silicate with the fast adsorption rate and high adsorption capacity of 382 mg/g for methylene blue. In addition, this synthesis method opens a new approach to fabricate other ordered mesoporous silicates.

  9. Corrosion behavior of mesoporous transition metal nitrides

    SciTech Connect

    Yang, Minghui; Allen, Amy J.; Nguyen, Minh T.; Ralston, Walter T.; MacLeod, Michelle J.; DiSalvo, Francis J.

    2013-09-15

    Transition metal nitrides (TMN) have many desirable characteristics such as high hardness and good thermal stability under reducing conditions. This work reports an initial survey of the chemical stability of mesoporous TMNs (TM=Nb, V, Cr and Ti) in water at 80 °C at neutral, acidic and alkaline pH. The mesoporous TMNs had specific surface areas of 25–60 m{sup 2}/g with average pore sizes ranging from 10 to 50 nm. The high surface areas of these materials enhance the rate of corrosion per unit mass over that of a bulk material, making detection of corrosion much easier. The products were characterized by Rietveld refinement of powder X-ray diffraction (PXRD) patterns and by scanning electron microscopy (SEM). Several nitrides have corrosion rates that are, within error, not distinguishable from zero (±1 Å/day). Of the nitrides examined, CrN appears to be the most corrosion resistant under acidic conditions. None of the nitrides studied are corrosion resistant under alkaline conditions. - Graphical abstract: Corrosion behavior of mesoporous transition metal nitrides (TM=Nb, V, Cr and Ti) in acidic and alkaline solutions at 80 °C for 2 weeks. Display Omitted - highlights: • Corrosion rates of mesoporous transition metal nitrides in aqueous solution is reported. • The mesoporous TMNs had surface areas of 25–60 m{sup 2}/g. • CrN is the most corrosion resistant under the conditions studied.

  10. Carbon Nanotube Synthesis Using Mesoporous Silica Templates

    SciTech Connect

    Zheng, Feng; Liang, Liang; Gao, Yufei; Sukamto, Johanes H.; Aardahl, Chris L.

    2002-07-01

    Well-aligned carbon nanotubes (CNTs) were grown on mesoporous silica films by chemical vapor deposition (CVD). Ethylene was used as the carbon source and CVD was performed at 1023 K and atmospheric pressure. The films were doped with Fe during gelation, and three different structure directing agents were used for mesoporous silica synthesis: polyoxyethylene (10) cetyl ether (C16EO10), Pluronic tri-block copolymer (P123), and cetyltriethylammonium chloride (CTAC). A high degree of CNT alignment on C16EO10-mesoporous silica films was produced at Fe:Si molar ratio of 1.80. Similar alignment of CNTs was achieved on the other two types of films but on CTAC-mesoporous silica films, CNTs only grew parallel to the substrate surface from the cracks in the films because of the in-plane arrangement of the mesopores in such films. Considerable progress has been made in producing multi-walled carbon nanotubes (CNTs) by catalytic CVD techniques. If CNTs are to be integrated into certain useful devices, it is critical to be able to grow highly aligned arrays of CNTs with narrow size distribution and at specific locations on a substrate. Long-range alignment normal to the substrate results from steric crowding if the initial catalyst sites are sufficiently dense. Alignment may be improved with better control of the density of catalytic sites by means of a template of appropriate pore structure. The confinement of CNTs by the pores during the initial growth may also help align CNTs.

  11. Exoelectrogenic biofilm as a template for sustainable formation of a catalytic mesoporous structure.

    PubMed

    Yates, Matthew D; Cusick, Roland D; Ivanov, Ivan; Logan, Bruce E

    2014-11-01

    Mesoporous structures can increase catalytic activity by maximizing the ratio of surface area to volume, but current synthesis techniques utilize expensive polymers and toxic chemicals. A Geobacter sulfurreducens biofilm was used as a sustainable template to form mesoporous Pd structures while eliminating the need for synthetic chemicals. The bulk of the biofilm material was removed by thermal treatments after nanoparticle formation, producing a catalytic Pd mesoporous (pore size 9.7 ± 0.1 nm) structure attached to the graphite electrode with a 1.5-2 µm thick backbone composed of nanoparticles (∼200 nm). A control electrode electrochemically plated with Pd in the absence of a biofilm exhibited a variable planar Pd base (∼0.5-3 µm thick) with sporadic Pd extrusions (∼2 µm across, 1-5 µm tall) from the surface. The biotemplated mesoporous structure produced 15-20% higher stable current densities during H2 oxidation tests than the electrochemically plated control electrode, even though 30% less Pd was present in the biotemplated catalyst. These results indicate that electroactive biofilms can be used as a sustainable base material to produce nanoporous structures without the need for synthetic polymers. Biotechnol. Bioeng. 2014;111: 2349-2354. © 2014 Wiley Periodicals, Inc. PMID:24771104

  12. Drug release from ordered mesoporous silicas.

    PubMed

    Doadrio, Antonio L; Salinas, Antonio J; Sánchez-Montero, José M; Vallet-Regí, M

    2015-01-01

    The state-of-the-art in the investigation of drugs release from Silica-based ordered Mesoporous Materials (SMMs) is reviewed. First, the SMM systems used like host matrixes are described. Then, the model drugs studied until now, including their pharmacological action, structure and the mesoporous matrix employed for each drug, are comprehensively listed. Next, the factors influencing the release of drugs from SMMs and the strategies used to control the drug delivery, specially the chemical functionalization of the silica surface, are discussed. In addition, how all these factors were gathered in a kinetic equation that describes the drug release from the mesoporous matrixes is explained. The new application of molecular modeling and docking in the investigation of the drug delivery mechanisms from SMMs is also presented. Finally, the new approaches under investigation in this field are mentioned including the design of smart stimuli-responsive materials and other recent proposals for a future investigation. PMID:26549760

  13. Nonenzymatic glucose detection using mesoporous platinum.

    PubMed

    Park, Sejin; Chung, Taek Dong; Kim, Hee Chan

    2003-07-01

    Roughness of nanoscopic dimensions can be used to selectively enhance the faradaic current of a sluggish reaction. Using this principle, we constructed mesoporous structures on the surfaces of pure platinum electrodes responding even more sensitively to glucose than to common interfering species, such as L-ascorbic acid and 4-acetamidophenol. Good sensitivities, as high as 9.6 microA cm(-2) mM(-1), were reproducibly observed in the presence of high concentration of chloride ion. The selectivities, sensitivities, and stabilities determined experimentally have demonstrated the potential of mesoporous platinum as a novel candidate for nonenzymatic glucose sensors. PMID:12964749

  14. Orientation specific deposition of mesoporous particles

    NASA Astrophysics Data System (ADS)

    Kjellman, Tomas; Bodén, Niklas; Wennerström, Hâkan; Edler, Karen J.; Alfredsson, Viveka

    2014-11-01

    We present a protocol for a facile orientation specific deposition of plate-like mesoporous SBA-15 silica particles onto a surface (mesopores oriented normal to surface). A drop of an aqueous dispersion of particles is placed on the surface and water vaporizes under controlled relative humidity. Three requirements are essential for uniform coverage: particle dispersion should not contain aggregates, a weak attraction between particles and surface is needed, and evaporation rate should be low. Aggregates are removed by stirring/sonication. Weak attraction is realized by introducing cationic groups to the surface. Insight into the mechanisms of the so-called coffee stain effect is also provided.

  15. Microwave assisted N-alkylation of amine functionalized crystal-like mesoporous phenylene-silica.

    PubMed

    Lourenço, Mirtha A O; Siegel, Renée; Mafra, Luís; Ferreira, Paula

    2013-04-28

    N-alkylation reaction of amine functionalized phenylene moieties in crystal-like mesoporous silica is successfully achieved with about 87% of conversion in two reaction cycles. A potassium iodide catalyzed method commonly used for the selective N-monoalkylation of aniline is adapted and optimized to the N-monoalkylation reactions of the amine functionalized periodic mesoporous phenylene-silica (NH2-PMO) under microwave irradiation with preservation of the ordered mesostructure and of the crystal-like molecular scale periodicity of the material. This functionalization opens an avenue for the preparation of new materials with different amino-alkyl groups specially designed for a desired application, namely on the adsorption or catalytic fields. PMID:23508286

  16. High-Temperature-Stable and Regenerable Catalysts: Platinum Nanoparticles in Aligned Mesoporous Silica Wells

    SciTech Connect

    Xiao, Chaoxian; Maligal-Ganesh, Raghu V.; Li, Tao; Wi, Zhiyuan; Guo, Zhiyong; Brashler, Kyle T.; Goes, Shannon; Li, Xinle; Goh, Tian Wei; Winans, Randall E.; Huang, Wenyu

    2013-08-22

    We report the synthesis, structural characterization, thermal stability study, and regeneration of nanostructured catalysts made of 2.9 nm Pt nanoparticles sandwiched between a 180 nm SiO2 core and a mesoporous SiO2 shell. The SiO2 shell consists of 2.5 nm channels that are aligned perpendicular to the surface of the SiO2 core. The nanostructure mimics Pt nanoparticles that sit in mesoporous SiO2 wells (Pt@MSWs). By using synchrotron-based small-angle X-ray scattering, we were able to prove the ordered structure of the aligned mesoporous shell. By using high-temperature cyclohexane dehydrogenation as a model reaction, we found that the Pt@MSWs of different well depths showed stable activity at 500 °C after the induction period. Conversely, a control catalyst, SiO2-sphere-supported Pt nanoparticles without a mesoporous SiO2 shell (Pt/SiO2), was deactivated. We deliberately deactivated the Pt@MSWs catalyst with a 50 nm deep well by using carbon deposition induced by a low H2/cyclohexane ratio. The deactivated Pt@MSWs catalyst was regenerated by calcination at 500 °C with 20 % O2 balanced with He. After the regeneration treatments, the activity of the Pt@MSWs catalyst was fully restored. Our results suggest that the nanostructured catalysts—Pt nanoparticles confined inside mesoporous SiO2 wells—are stable and regenerable for treatments and reactions that require high temperatures.

  17. High-temperature-stable and regenerable catalysts: platinum nanoparticles in aligned mesoporous silica wells.

    PubMed

    Xiao, Chaoxian; Maligal-Ganesh, Raghu V; Li, Tao; Qi, Zhiyuan; Guo, Zhiyong; Brashler, Kyle T; Goes, Shannon; Li, Xinle; Goh, Tian Wei; Winans, Randall E; Huang, Wenyu

    2013-10-01

    We report the synthesis, structural characterization, thermal stability study, and regeneration of nanostructured catalysts made of 2.9 nm Pt nanoparticles sandwiched between a 180 nm SiO2 core and a mesoporous SiO2 shell. The SiO2 shell consists of 2.5 nm channels that are aligned perpendicular to the surface of the SiO2 core. The nanostructure mimics Pt nanoparticles that sit in mesoporous SiO2 wells (Pt@MSWs). By using synchrotron-based small-angle X-ray scattering, we were able to prove the ordered structure of the aligned mesoporous shell. By using high-temperature cyclohexane dehydrogenation as a model reaction, we found that the Pt@MSWs of different well depths showed stable activity at 500 °C after the induction period. Conversely, a control catalyst, SiO2 -sphere-supported Pt nanoparticles without a mesoporous SiO2 shell (Pt/SiO2 ), was deactivated. We deliberately deactivated the Pt@MSWs catalyst with a 50 nm deep well by using carbon deposition induced by a low H2 /cyclohexane ratio. The deactivated Pt@MSWs catalyst was regenerated by calcination at 500 °C with 20 % O2 balanced with He. After the regeneration treatments, the activity of the Pt@MSWs catalyst was fully restored. Our results suggest that the nanostructured catalysts-Pt nanoparticles confined inside mesoporous SiO2 wells-are stable and regenerable for treatments and reactions that require high temperatures. PMID:24039118

  18. Tetracycline-Containing MCM-41 Mesoporous Silica Nanoparticles for the Treatment of Escherichia coli.

    PubMed

    Koneru, Bhuvaneswari; Shi, Yi; Wang, Yu-Chieh; Chavala, Sai H; Miller, Michael L; Holbert, Brittany; Conson, Maricar; Ni, Aiguo; Di Pasqua, Anthony J

    2015-01-01

    Tetracycline (TC) is a well-known broad spectrum antibiotic, which is effective against many Gram positive and Gram negative bacteria. Controlled release nanoparticle formulations of TC have been reported, and could be beneficial for application in the treatment of periodontitis and dental bone infections. Furthermore, TC-controlled transcriptional regulation systems (Tet-on and Tet-off) are useful for controlling transgene expression in vitro and in vivo for biomedical research purposes; controlled TC release systems could be useful here, as well. Mesoporous silica nanomaterials (MSNs) are widely studied for drug delivery applications; Mobile crystalline material 41 (MCM-41), a type of MSN, has a mesoporous structure with pores forming channels in a hexagonal fashion. We prepared 41 ± 4 and 406 ± 55 nm MCM-41 mesoporous silica nanoparticles and loaded TC for controlled dug release; TC content in the TC-MCM-41 nanoparticles was 18.7% and 17.7% w/w, respectively. Release of TC from TC-MCM-41 nanoparticles was then measured in phosphate-buffered saline (PBS), pH 7.2, at 37 °C over a period of 5 h. Most antibiotic was released from both over this observation period; however, the majority of TC was released over the first hour. Efficacy of the TC-MCM-41 nanoparticles was then shown to be superior to free TC against Escherichia coli (E. coli) in culture over a 24 h period, while blank nanoparticles had no effect. PMID:26528964

  19. Functionalized bimodal mesoporous silicas as carriers for controlled aspirin delivery

    NASA Astrophysics Data System (ADS)

    Gao, Lin; Sun, Jihong; Li, Yuzhen

    2011-08-01

    The bimodal mesoporous silica modified with 3-aminopropyltriethoxysilane was performed as the aspirin carrier. The samples' structure, drug loading and release profiles were characterized with X-ray diffraction, scanning electron microscopy, N 2 adsorption and desorption, Fourier transform infrared spectroscopy, TG analysis, elemental analysis and UV-spectrophotometer. For further exploring the effects of the bimodal mesopores on the drug delivery behavior, the unimodal mesoporous material MCM-41 was also modified as the aspirin carrier. Meantime, Korsmeyer-Peppas equation ft= ktn was employed to analyze the dissolution data in details. It is indicated that the bimodal mesopores are beneficial for unrestricted drug molecules diffusing and therefore lead to a higher loading and faster releasing than that of MCM-41. The results show that the aspirin delivery properties are influenced considerably by the mesoporous matrix, whereas the large pore of bimodal mesoporous silica is the key point for the improved controlled-release properties.

  20. Electrical Relaxation in ULTEM® and ULTEM® Containing Mesoporous Silica

    NASA Astrophysics Data System (ADS)

    Turo, Andrew; Edmondson, Charles E.; Lomax, Joseph F.; Bendler, John T.; Fontanella, John J.; Wintersgill, Mary C.

    2008-08-01

    Mesoporous silica has been added to Ultem® 1000 polyetherimide using solution casting. The mesoporous silica that was added was either uncoated or coated with polystyrene. Audio frequency dielectric relaxation studies were then carried out over the temperature range 5.5 to 550 K. Several interesting results were obtained. First, the uncoated mesoporous silica caused essentially no change in the relaxation spectrum of pure Ultem®. The polystyrene coated mesoporous silica caused rather large changes. The most striking example is the introduction of a new relaxation. This relaxation occurs at about 150 K and 1000 Hz as showing in fig. 1 via the open circles.

  1. Surface functionalized mesoporous material and method of making same

    DOEpatents

    Feng, Xiangdong [West Richland, WA; Liu, Jun [West Richland, WA; Fryxell, Glen E [Kennewick, WA

    2001-12-04

    According to the present invention, an organized assembly of functional molecules with specific interfacial functionality (functional group(s)) is attached to available surfaces including within mesopores of a mesoporous material. The method of the present invention avoids the standard base soak that would digest the walls between the mesopores by boiling the mesoporous material in water for surface preparation then removing all but one or two layers of water molecules on the internal surface of a pore. Suitable functional molecule precursor is then applied to permeate the hydrated pores and the precursor then undergoes condensation to form the functional molecules on the interior surface(s) of the pore(s).

  2. Mesoporous carbon/zirconia composites: a potential route to chemically functionalized electrically-conductive mesoporous materials.

    PubMed

    Oh, Jung-Min; Kumbhar, Amar S; Geiculescu, Olt; Creager, Stephen E

    2012-02-14

    Mesoporous nanocomposite materials in which nanoscale zirconia (ZrO(2)) particles are embedded in the carbon skeleton of a templated mesoporous carbon matrix were prepared, and the embedded zirconia sites were used to accomplish chemical functionalization of the interior surfaces of mesopores. These nanocomposite materials offer a unique combination of high porosity (e.g., ∼84% void space), electrical conductivity, and surface tailorability. The ZrO(2)/carbon nanocomposites were characterized by thermogravimetric analysis, nitrogen-adsorption porosimetry, helium pychnometry, powder X-ray diffraction, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. Comparison was made with templated mesoporous carbon samples prepared without addition of ZrO(2). Treatment of the nanocomposites with phenylphosphonic acid was undertaken and shown to result in robust binding of the phosphonic acid to the surface of ZrO(2) particles. Incorporation of nanoscale ZrO(2) surfaces in the mesoporous composite skeleton offers unique promise as a means for anchoring organophosphonates inside of pores through formation of robust covalent Zr-O-P bonds. PMID:22248432

  3. Alendronate decorated nano hydroxyapatite in mesoporous silica: Cytotoxicity and osteogenic properties

    NASA Astrophysics Data System (ADS)

    Huang, Wei; Liu, Weiqiang; She, Zhending; Wu, Hongkai; Shi, Xuetao

    2011-09-01

    Mesoporous silica is a promising drug delivery vehicle due to its large surface area and order porous structure. Hydroxyapatite-modified mesoporous silica materials (MSH) have been developed, and the cytotoxicity of MSH and unmodified mesoporous silica (HMS) has also been studied in this work. The results indicated that MSH exhibited lower cytotoxicity than HMS. The drug release property of MSH was also investigated in this paper. Alendronate (AL) was laden into MSH and HMS, respectively. MSH exhibited long release period lasting over 30 days with a weak burst release in the first 5 days; however, the AL release period of HMS was just 5 days with a remarkable burst release. In addition, the osteogenic commitment induced in human marrow mesenchymal stem cells (MSCs) by MSH-alendronate (MSH-AL) was also investigated, and the osteogenesis of MSCs was evaluated by alkaline phosphatase (ALP) assay. The osteogenesis of MSCs induced by MSH-AL is comparable to that induced by the osteogenic medium. Taken together, MSH can be severed as potential bone repair materials with lower cytotoxicity.

  4. Mesoporous structured MIPs@CDs fluorescence sensor for highly sensitive detection of TNT.

    PubMed

    Xu, Shoufang; Lu, Hongzhi

    2016-11-15

    A facile strategy was developed to prepare mesoporous structured molecularly imprinted polymers capped carbon dots (M-MIPs@CDs) fluorescence sensor for highly sensitive and selective determination of TNT. The strategy using amino-CDs directly as "functional monomer" for imprinting simplify the imprinting process and provide well recognition sites accessibility. The as-prepared M-MIPs@CDs sensor, using periodic mesoporous silica as imprinting matrix, and amino-CDs directly as "functional monomer", exhibited excellent selectivity and sensitivity toward TNT with detection limit of 17nM. The recycling process was sustainable for 10 times without obvious efficiency decrease. The feasibility of the developed method in real samples was successfully evaluated through the analysis of TNT in soil and water samples with satisfactory recoveries of 88.6-95.7%. The method proposed in this work was proved to be a convenient and practical way to prepare high sensitive and selective fluorescence MIPs@CDs sensors. PMID:27315521

  5. The Synthesis of Functional Mesoporous Materials

    SciTech Connect

    Fryxell, Glen E.

    2006-11-01

    The ability to decorate a silica surface with specific ligand fields and/or metal complexes creates powerful new capabilities for catalysis, chemical separations and sensor development. Integrating this with the ability to control the spacing of these complexes across the surface, as well as the symmetry and size of the pore structure, allows the synthetic chemist to hierarchically tailor these structured nanomaterials to specific needs. The next step up the “scale ladder” is provided by the ability to coat these mesoporous materials onto complex shapes, allowing for the intimate integration of these tailored materials into device interfaces. The ability to tailor the pore structure of these mesoporous supports is derived from the surfactant templated synthesis of mesoporous materials, an area which has seen an explosion of activity over the last decade.[1,2] The ability to decorate the surface with the desired functionality requires chemical modification of the oxide interface, most commonly achieved using organosilane self-assembly.[3-6] This manuscript describes recent results from the confluence of these two research areas, with a focus on synthetic manipulation of the morphology and chemistry of the interface, with the ultimate goal of binding metal centers in a chemically useful manner.

  6. Mesoporous silica nanoparticles for active corrosion protection.

    PubMed

    Borisova, Dimitriya; Möhwald, Helmuth; Shchukin, Dmitry G

    2011-03-22

    This work presents the synthesis of monodisperse, mesoporous silica nanoparticles and their application as nanocontainers loaded with corrosion inhibitor (1H-benzotriazole (BTA)) and embedded in hybrid SiOx/ZrOx sol-gel coating for the corrosion protection of aluminum alloy. The developed porous system of mechanically stable silica nanoparticles exhibits high surface area (∼1000 m2·g(-1)), narrow pore size distribution (d∼3 nm), and large pore volume (∼1 mL·g(-1)). As a result, a sufficiently high uptake and storage of the corrosion inhibitor in the mesoporous nanocontainers was achieved. The successful embedding and homogeneous distribution of the BTA-loaded monodisperse silica nanocontainers in the passive anticorrosive SiOx/ZrOx film improve the wet corrosion resistance of the aluminum alloy AA2024 in 0.1 M sodium chloride solution. The enhanced corrosion protection of this newly developed active system in comparison to the passive sol-gel coating was observed during a simulated corrosion process by the scanning vibrating electrode technique (SVET). These results, as well as the controlled pH-dependent release of BTA from the mesoporous silica nanocontainers without additional polyelectrolyte shell, suggest an inhibitor release triggered by the corrosion process leading to a self-healing effect. PMID:21344888

  7. Mesoporous carbon nanomaterials as environmental adsorbents.

    PubMed

    Tripathi, Pranav K; Gan, Lihua; Liu, Mingxian; Rao, Nageswara N

    2014-02-01

    The transportation and diffusion of the guest objects or molecules in the porous carbon nanomaterials can be facilitated by reducing the pathway and resistance. The reduced pathway depends on the porous nature of carbon nanomaterials. Classification of porous carbon materials by the International Union of Pure and Applied Chemistry (IUPAC) has given a new opportunity to design the pores as per their applicability and to understand the mobility of ions, atoms, and molecules in the porous network of carbon materials and also advanced their countless applicability. However, synthesis of carbon nanomaterials with a desired porous network is still a great challenge. Although, remarkable developments have taken place in the recent years, control over the pores size and/or hierarchical porous architectures, especially in the synthesis of carbon nanospheres (CNSs) and ordered mesoporous carbon (OMCs) is still intriguing. The micro and mesoporous CNSs and OMCs have been prepared by a variety of procedures and over a wide range of compositions using various different surfactant templates and carbon precursors etc. The mechanisms of formation of micromesopore in the CNSs and OMCs are still evolving. On the other hand, the urge for adsorbents with very high adsorption capacities for removing contaminants from water is growing steadily. In this review, we address the state-of-the-art synthesis of micro and mesoporous CNSs and OMCs, giving examples of their applications for adsorptive removals of contaminants including our own research studies. PMID:24749459

  8. Polymer/mesoporous metal oxide composites

    NASA Astrophysics Data System (ADS)

    Ver Meer, Melissa Ann

    Understanding the nature of the interfacial region between an organic polymer matrix and an inorganic filler component is essential in determining how this region impacts the overall bulk properties of the organic/inorganic hybrid composite material. In this work, polystyrene was used as the model polymer matrix coupled with silica-based filler materials to investigate the nature of structure-property relationships in polymer composites. Initial work was conducted on synthesis and characterization of colloidal and mesoporous silica particles melt blended into the polystyrene matrix. Modification of the interface was accomplished by chemically bonding the silica particles with the polystyrene chains through polymerization from the particle surface via atom transfer radical polymerization. High molecular weight polystyrene chains were formed and bulk test samples were evaluated with increased thermal stability of the grafted polymer composite system versus equivalent melt blended polymer composites. Polymer grafting was also conducted from the internal pores of mesoporous silica, further improving the thermal stability of the composite system without degrading dynamic mechanical properties. Characterization of the polymer composites was conducted with gel permeation chromatography, transmission electron microscopy, thermogravimetric analysis and dynamic mechanical analysis. It was also discovered during the polystyrene-silica composite studies that amorphous polystyrene can possess a less mobile phase, evident in a second peak of the loss tangent (tan delta). The long annealing times necessitated by the mesoporous silica composites were replicated in as received polystyrene. This new, less mobile phase is of particular interest in determining the mobility of polymer chains in the interfacial region.

  9. Phosphorylated Mesoporous Carbon as a Solid Acid Catalyst

    SciTech Connect

    Dai, Sheng; Mayes, Richard T; Fulvio, Pasquale F; Ma, Zhen

    2011-01-01

    Mesoporous carbon catalyst supports are attractive due to their wide chemical stability while potentially increasing masstransport through and providing a path for larger molecules to access catalytic sites. Herein we report the synthesis of a 10 phosphorylated mesoporous carbon solid-acid catalyst characterized by NH3-TPD and isopropanol dehydration.

  10. Protection of Organic Matter from Enzyme Degradation by Mineral Mesopores

    NASA Astrophysics Data System (ADS)

    Zimmerman, A. R.; Chorover, J. D.; Brantley, S. L.

    2003-12-01

    Mineral mesopores (2-50 nm diameter) may sequester organic matter (natural and pollutant) and protect it from microbial and fungal enzymatic degradation in soils and sediments. Synthetic mesoporous alumina and silica minerals with uniform pore sizes and shapes were used to test the role of mesopores in protecting organic matter from enzymatic degradation. A model humic compound, L-3-4-dihydroxyphenylalanine (L-DOPA), was sorbed to the internal surfaces of mesoporous alumina (8.2 nm diameter pores) and mesoporous silica (3.4 nm diameter pores) as well as to the external surfaces of nonporous alumina and silica analogues. A fungal derived enzyme, laccase, was added to these sorbate-sorbent pairs in aqueous solution and activity was monitored by oxygen consumption. Though enzyme activity was suppressed in both cases by mineral-enzyme interaction (enzyme inhibition likely due to adsorption of the enzyme), both the rate and total extent of enzyme-mediated degradation of mesopore-sorbed L-DOPA was 3-40 times lower than that of the externally-sorbed analogue. These results provide, for the first time, direct evidence for the viability of the proposed mesopore protection mechanism for the sequestration and preservation of sedimentary organic matter and organic contaminants. Mesopore adsorption/desorption phenomena may also help explain the slow degradation of organic contaminants in soil and sediment and may prove useful as delivery vehicles for organic compounds to agricultural, medical or environmental systems.

  11. Transport properties of fast proton conducting mesoporous silica xerogels

    NASA Astrophysics Data System (ADS)

    Colomer, M. T.; Rubio, F.; Jurado, J. R.

    Mesoporous acid-free silica xerogels exhibiting a proton conductivity of 2.0 × 10 -2 S cm -1 at 80 °C and 81% RH is reported for the first time. The proton conductivity values, lower cost and higher hydrophilicity of mesoporous silica xerogels make them potential substitutes for Nafion membranes in proton exchange membranes fuel cells (PEMFCs).

  12. The Synthesis of Cadmium Doped Mesoporous TiO2

    SciTech Connect

    Li, Xiaohong S.; Fryxell, Glen E.; Engelhard, Mark H.; Wang, Chong M.

    2007-06-01

    Cd doped mesoporous titanium oxide was prepared using non-ionic surfactants and easily handled titanium precursors. The Cd doping was found to be able to significantly inhibit the growth of anatase crystal size, stabilize the mesoporous structure, and retard the densification of nanoporous TiO2 at elevated temperatures.

  13. [Study on absorbing volatile oil with mesoporous carbon].

    PubMed

    Yan, Hong-mei; Jia, Xiao-bin; Zhang, Zhen-hai; Sun, E; Yang Nan

    2014-11-01

    Clove oil and turmeric oil were absorbed by mesoporous carbon. The absorption ratio of mesoporous carbon to volatile oil was optimized with the eugenol yield and curcumol yield as criteria Curing powder was characterized by scanning electron microscopy (SEM) and differential scanning calorietry (DSC). The effects of mesoporous carbon on dissolution in vitro and thermal stability of active components were studied. They reached high adsorption rate when the absorption ratio of mesoporous carbon to volatile oil was 1:1. When volatile oil was absorbed, dissolution rate of active components had a little improvement and their thermal stability improved after volatile oil was absorbed by the loss rate decreasing more than 50%. Absorbing herbal volatile oil with mesoporous carbon deserves further studying. PMID:25850263

  14. Biodegradation-tunable mesoporous silica nanorods for controlled drug delivery.

    PubMed

    Park, Sung Bum; Joo, Young-Ho; Kim, Hyunryung; Ryu, WonHyoung; Park, Yong-il

    2015-05-01

    Mesoporous silica in the forms of micro- or nanoparticles showed great potentials in the field of controlled drug delivery. However, for precision control of drug release from mesoporous silica-based delivery systems, it is critical to control the rate of biodegradation. Thus, in this study, we demonstrate a simple and robust method to fabricate "biodegradation-tunable" mesoporous silica nanorods based on capillary wetting of anodic aluminum oxide (AAO) template with an aqueous alkoxide precursor solution. The porosity and nanostructure of silica nanorods were conveniently controlled by adjusting the water/alkoxide molar ratio of precursor solutions, heat-treatment temperature, and Na addition. The porosity and biodegradation kinetics of the fabricated mesoporous nanorods were analyzed using N2 adsorption/desorption isotherm, TGA, DTA, and XRD. Finally, the performance of the mesoporous silica nanorods as drug delivery carrier was demonstrated with initial burst and subsequent "zero-order" release of anti-cancer drug, doxorubicin. PMID:25746247

  15. Synthesis and catalytic applications of combined zeolitic/mesoporous materials

    PubMed Central

    Vernimmen, Jarian; Cool, Pegie

    2011-01-01

    Summary In the last decade, research concerning nanoporous siliceous materials has been focused on mesoporous materials with intrinsic zeolitic features. These materials are thought to be superior, because they are able to combine (i) the enhanced diffusion and accessibility for larger molecules and viscous fluids typical of mesoporous materials with (ii) the remarkable stability, catalytic activity and selectivity of zeolites. This review gives an overview of the state of the art concerning combined zeolitic/mesoporous materials. Focus is put on the synthesis and the applications of the combined zeolitic/mesoporous materials. The different synthesis approaches and formation mechanisms leading to these materials are comprehensively discussed and compared. Moreover, Ti-containing nanoporous materials as redox catalysts are discussed to illustrate a potential implementation of combined zeolitic/mesoporous materials. PMID:22259762

  16. Mesoporous aluminosilicates assembled from dissolved LTA zeolite and triblock copolymer in the presence of tetramethylammonium hydroxide.

    PubMed

    Tanaka, Shunsuke; Okada, Hiroaki; Nakatani, Norihito; Maruo, Takanori; Nishiyama, Norikazu; Miyake, Yoshikazu

    2009-05-15

    Zeolite Na-A crystals dissolved in a HCl solution were used as a single-source of silicon and aluminum for the synthesis of mesoporous aluminosilicates via a template-assisted method with an organic base tetramethylammonium hydroxide (TMAOH). Amphiphilic triblock copolymer Pluronic F127 (EO(106)PO(70)EO(106)) was used as template. Increasing the amount of TMAOH in the synthetic solution resulted in an increase in the aluminum content of the products. On the other hand, mesostructural periodicity was deteriorated with higher content of aluminum incorporated into the mesoporous framework. The samples with low Si/Al ratios less than 5 have wormhole-like pore structure, while the samples with Si/Al ratios more than 7 possess highly ordered mesoporous structure, a body-centered Im3m symmetry, with single crystal like morphology. The samples with Si/Al ratio of 7, which prepared at TMAOH molar concentration of 25 mM in the templating solution, possess BET surface area of 470 m(2)/g, pore size of 6.4 nm, and pore volume of 0.56 cm(3)/g. Aluminum atoms have successfully been incorporated in a tetra-coordinated position and remained stable even after calcination at 600 degrees C. PMID:19223041

  17. Doxorubicin-loaded mesoporous silica nanoparticle composite nanofibers for long-term adjustments of tumor apoptosis

    NASA Astrophysics Data System (ADS)

    Yuan, Ziming; Pan, Yue; Cheng, Ruoyu; Sheng, Lulu; Wu, Wei; Pan, Guoqing; Feng, Qiming; Cui, Wenguo

    2016-06-01

    There is a high local recurrence (LR) rate in breast-conserving therapy (BCT) and enhancement of the local treatment is promising as a way to improve this. Thus we propose a drug delivery system using doxorubicin (DOX)-loaded mesoporous silica nanoparticle composite nanofibers which can release anti-tumor drugs in two phases—burst release in the early stage and sustained release at a later stage—to reduce the LR of BCT. In the present study, we designed a novel composite nanofibrous scaffold to realize the efficient release of drugs by loading both DOX and DOX-loaded mesoporous silica nanoparticles into an electrospun PLLA nanofibrous scaffold. In vitro results demonstrated that this kind of nanomaterial can release DOX in two phases, and the results of in vivo experiments showed that this hybrid nanomaterial significantly inhibited the tumor growth in a solid tumor model. Histopathological examination demonstrated that the apoptosis of tumor cells in the treated group over a 10 week period was significant. The anti-cancer effects were also accompanied with decreased expression of Bcl-2 and TNF-α, along with up-regulation of Bax, Fas and the activation of caspase-3 levels. The present study illustrates that the mesoporous silica nanoparticle composite nanofibrous scaffold could have anti-tumor properties and could be further developed as adjuvant therapeutic protocols for the treatment of cancer.

  18. A highly ordered cubic mesoporous silica/graphene nanocomposite

    NASA Astrophysics Data System (ADS)

    Lee, Chang-Wook; Roh, Kwang Chul; Kim, Kwang-Bum

    2013-09-01

    A highly ordered cubic mesoporous silica (KIT-6)/graphene nanocomposite and 2D KIT-6 nanoflakes were synthesized using a novel synthesis methodology. The non-ionic triblock copolymer, P123, played a dual role as a structure-directing agent in the formation of the cubic mesoporous structure and as a cross-linking agent between mesoporous silica and graphene. The prepared (KIT-6)/graphene nanocomposite could act as a template for the preparation of mesoporous material/graphene nanocomposites.A highly ordered cubic mesoporous silica (KIT-6)/graphene nanocomposite and 2D KIT-6 nanoflakes were synthesized using a novel synthesis methodology. The non-ionic triblock copolymer, P123, played a dual role as a structure-directing agent in the formation of the cubic mesoporous structure and as a cross-linking agent between mesoporous silica and graphene. The prepared (KIT-6)/graphene nanocomposite could act as a template for the preparation of mesoporous material/graphene nanocomposites. Electronic supplementary information (ESI) available: S1: TEM images of disordered mesoporous silica/graphene nanocomposite; S2: TEM images of KIT-6/GO nanocomposite; S3: Thermogravimetric analysis of KIT-6/GO and KG-400-700; S4: SEM and TEM images of KIT-6; S5: Low angle XRD, Raman spectra, N2 adsorption isotherms, pore size distribution and photographic images of the prepared samples; S6: TEM image and N2 adsorption isotherms of mesoporous carbon/graphene nanocomposite; S7: XPS C1s spectra of the prepared samples. See DOI: 10.1039/c3nr03108j

  19. Controlling drug delivery kinetics from mesoporous titania thin films by pore size and surface energy

    PubMed Central

    Karlsson, Johan; Atefyekta, Saba; Andersson, Martin

    2015-01-01

    The osseointegration capacity of bone-anchoring implants can be improved by the use of drugs that are administrated by an inbuilt drug delivery system. However, to attain superior control of drug delivery and to have the ability to administer drugs of varying size, including proteins, further material development of drug carriers is needed. Mesoporous materials have shown great potential in drug delivery applications to provide and maintain a drug concentration within the therapeutic window for the desired period of time. Moreover, drug delivery from coatings consisting of mesoporous titania has shown to be promising to improve healing of bone-anchoring implants. Here we report on how the delivery of an osteoporosis drug, alendronate, can be controlled by altering pore size and surface energy of mesoporous titania thin films. The pore size was varied from 3.4 nm to 7.2 nm by the use of different structure-directing templates and addition of a swelling agent. The surface energy was also altered by grafting dimethylsilane to the pore walls. The drug uptake and release profiles were monitored in situ using quartz crystal microbalance with dissipation (QCM-D) and it was shown that both pore size and surface energy had a profound effect on both the adsorption and release kinetics of alendronate. The QCM-D data provided evidence that the drug delivery from mesoporous titania films is controlled by a binding–diffusion mechanism. The yielded knowledge of release kinetics is crucial in order to improve the in vivo tissue response associated to therapeutic treatments. PMID:26185444

  20. Problem Periods

    MedlinePlus

    ... gov/ Home Body Getting your period Problem periods Problem periods It’s common to have cramps or feel ... doctor Some common period problems Signs of period problems top One way to know if you may ...

  1. In vitro degradability, bioactivity and cell responses to mesoporous magnesium silicate for the induction of bone regeneration.

    PubMed

    Wu, Zhaoying; Tang, Tingting; Guo, Han; Tang, Songchao; Niu, Yunfei; Zhang, Jue; Zhang, Wenjing; Ma, Rui; Su, Jiacan; Liu, Changsheng; Wei, Jie

    2014-08-01

    Mesoporous magnesium silicate (m-MS) was synthesized, and the in vitro degradability, bioactivity and primary cell responses to m-MS were investigated. The results suggested that the m-MS with mesoporous channels of approximately 5nm possessed the high specific surface area of 451.0m(2)/g and a large specific pore volume of 0.41cm(3)/g compared with magnesium silicate (MS) without mesopores of 75m(2)/g and 0.21cm(3)/g, respectively. The m-MS was able to absorb a large number of water, with water absorption of 74% compared with 26% for MS. The m-MS was also degradable in a Tris-HCl solution, with a weight loss ratio of 40wt% after a 70-day immersion period. The m-MS exhibited good in vitro bioactivity, inducing apatite formation on its surfaces after soaking in simulated body fluid (SBF) at a faster rate than observed for MS. The m-MS surface clearly promoted the proliferation and differentiation of MC3T3-E1 cells, and their normal cell morphology indicated excellent cytocompatibility. This study suggested that mesoporous magnesium silicate with a high specific surface area and pore volume had suitable degradability and good bioactivity and biocompatibility, making it an excellent candidate biomaterial for the induction of bone regeneration. PMID:24905677

  2. Contribution of mesopores in MgO-templated mesoporous carbons to capacitance in non-aqueous electrolytes

    NASA Astrophysics Data System (ADS)

    Kado, Yuya; Soneda, Yasushi; Yoshizawa, Noriko

    2015-02-01

    MgO-templated mesoporous carbons were fabricated by annealing trimagnesium dicitrate nonahydrate at various temperatures from 700 to 1000 °C with subsequent acid leaching of MgO. The obtained carbons contained a large amount of mesopores. Performances of electric double-layer capacitors using these carbons were examined for propylene carbonate electrolyte containing 1 M tetraethylammonium tetrafluoroborate. The mesoporous carbons synthesized at higher temperatures showed better rate capabilities. AC impedance measurements indicated that high-temperature annealing of the carbon precursors and the presence of mesopores were important for high rate performance. In addition, the contribution of mesopores to capacitance was more significant at higher current densities of 30 A g-1.

  3. Modified Mesoporous Silica for Efficient Siloxane Capture.

    PubMed

    Jafari, Tahereh; Jiang, Ting; Zhong, Wei; Khakpash, Nasser; Deljoo, Bahareh; Aindow, Mark; Singh, Prabhakar; Suib, Steven L

    2016-03-15

    In this study, octamethylcyclotetrasiloxane (D4) was removed by using a novel modified solid adsorbent of mesoporous silica. The adsorbent was synthesized using inverse micelles with some modifications in the synthesis process (temperature of gelation) and in the post treatment conditions (calcination temperature and heating rate) with a concomitant improvement of D4 uptake. This is the first report on regulating the textural properties of the mesoporous silica material UCT-14 to develop an active silica adsorbent. These adjustments resulted in an increase of the silica surface area from 391 to 798 m(2)·g(-1), which leads to a high capacity (686 mg·g(-1)) of D4-capture for the silica synthesized at 80 °C, calcined at 450 °C with the heating rate of 100 °C·min(-1) (Si-Syn80). This adsorbent showed comparable adsorption performance with the widely used commercial silica gel under dry and humid condition. Recyclability tests on the commercial silica gel and mesoporous silica synthesized at 120 °C and calcined at 450 °C with a heating rate of 100 °C·min(-1) (called Si-Syn120 or Si-450 or Si-100 °C·min(-1)) indicated that the Si-Syn120 (capacity drop 10%) is more efficient than silica gel (capacity drop 15%) after three cycles. Although, the presence of moisture (25%) in the nitrogen gas stream led to capacity reduction in both Si-Syn120 and commercial silica gel, the modified UCT-14 shows slightly better resistance to humid condition. PMID:26890152

  4. Fluorescence properties of dye doped mesoporous silica

    NASA Astrophysics Data System (ADS)

    Carbonaro, Carlo M.; Corpino, Riccardo; Ricci, Pier Carlo; Chiriu, Daniele; Cannas, Carla

    2014-10-01

    In this paper we present a review of the main results we obtained studying the emission properties of organic-inorganic hybrids obtained combining mesoporous silica and Xantene dyes, in particular the standard referenc Rhodamine 6G. The purpose of the review is to show the possibility to efficiently "dope" the transparent inorganic porous matrix to obtain promising systems for photonic and biomedical applications. The strategies to solve the concentration effect and the leaching phenomenon are discussed within the framework of the single exciton theory.

  5. Mesoporous silica-titania composed materials.

    PubMed

    Messina, Paula V; Morini, Marcela A; Sierra, María B; Schulz, Pablo C

    2006-08-01

    Titania mesosized particles were obtained by TiCl4 hydrolysis in Aerosol OT/water/n-hexane microemulsion. These particles were incorporated in surfactant templated silica mesoporous materials of MCM-41 and MCM-50 structures. Results depended on the surfactant: hexadecyltrimethylammonium bromide templated materials retained the honeycomb structure with small modifications in their characteristics. The dodecyltrimethylammonium bromide templated material changed from honeycomb to lamellar structure when the titania particles were included, with dramatic changes in the structure characteristics. The didodecyldimethylammonium bromide templated lamellar structure was retained after TIO2 inclusion, with a slight increase in the specific area, pore diameter and pore walls thickness. PMID:16600274

  6. Fluorescence properties of dye doped mesoporous silica

    SciTech Connect

    Carbonaro, Carlo M. Corpino, Riccardo Ricci, Pier Carlo Chiriu, Daniele; Cannas, Carla

    2014-10-21

    In this paper we present a review of the main results we obtained studying the emission properties of organic-inorganic hybrids obtained combining mesoporous silica and Xantene dyes, in particular the standard reference Rhodamine 6G. The purpose of the review is to show the possibility to efficiently 'dope' the transparent inorganic porous matrix to obtain promising systems for photonic and biomedical applications. The strategies to solve the concentration effect and the leaching phenomenon are discussed within the framework of the single exciton theory.

  7. Branched artificial nanofinger arrays by mesoporous interfacial atomic rearrangement.

    PubMed

    Kong, Biao; Tang, Jing; Zhang, Yueyu; Selomulya, Cordelia; Gong, Xingao; Liu, Yang; Zhang, Wei; Yang, Jianping; Wang, Wenshuo; Sun, Xiaotian; Wang, Yufei; Zheng, Gengfeng; Zhao, Dongyuan

    2015-04-01

    The direct production of branched semiconductor arrays with highly ordered orientation has proven to be a considerable challenge over the last two decades. Here we report a mesoporous interfacial atomic rearrangement (MIAR) method to directly produce highly crystalline, finger-like branched iron oxide nanoarrays from the mesoporous nanopyramids. This method has excellent versatility and flexibility for heteroatom doping of metallic elements, including Sn, Bi, Mn, Fe, Co, Ni, Cu, Zn, and W, in which the mesoporous nanopyramids first absorb guest-doping molecules into the mesoporous channels and then convert the mesoporous pyramids into branching artificial nanofingers. The crystalline structure can provide more optoelectronic active sites of the nanofingers by interfacial atomic rearrangements of doping molecules and mesopore channels at the porous solid-solid interface. As a proof-of-concept, the Sn-doped Fe2O3 artificial nanofingers (ANFs) exhibit a high photocurrent density of ∼1.26 mA/cm(2), ∼5.25-fold of the pristine mesoporous Fe2O3 nanopyramid arrays. Furthermore, with surface chemical functionalization, the Sn-doped ANF biointerfaces allow nanomolar level recognition of metabolism-related biomolecules (∼5 nm for glutathione). This MIAR method suggests a new growth means of branched mesostructures, with enhanced optoelectronic applications. PMID:25764364

  8. Functionalized bimodal mesoporous silicas as carriers for controlled aspirin delivery

    SciTech Connect

    Gao Lin; Sun Jihong; Li Yuzhen

    2011-08-15

    The bimodal mesoporous silica modified with 3-aminopropyltriethoxysilane was performed as the aspirin carrier. The samples' structure, drug loading and release profiles were characterized with X-ray diffraction, scanning electron microscopy, N{sub 2} adsorption and desorption, Fourier transform infrared spectroscopy, TG analysis, elemental analysis and UV-spectrophotometer. For further exploring the effects of the bimodal mesopores on the drug delivery behavior, the unimodal mesoporous material MCM-41 was also modified as the aspirin carrier. Meantime, Korsmeyer-Peppas equation f{sub t}=kt{sup n} was employed to analyze the dissolution data in details. It is indicated that the bimodal mesopores are beneficial for unrestricted drug molecules diffusing and therefore lead to a higher loading and faster releasing than that of MCM-41. The results show that the aspirin delivery properties are influenced considerably by the mesoporous matrix, whereas the large pore of bimodal mesoporous silica is the key point for the improved controlled-release properties. - Graphical abstract: Loading (A) and release profiles (B) of aspirin in N-BMMs and N-MCM-41 indicated that BMMs have more drug loading capacity and faster release rate than that MCM-41. Highlights: > Bimodal mesoporous silicas (BMMs) and MCM-41 modified with amino group via post-treatment procedure. > Loading and release profiles of aspirin in modified BMMs and MCM-41. > Modified BMMs have more drug loading capacity and faster release rate than that modified MCM-41.

  9. Mesoporous silica material TUD-1 as a drug delivery system.

    PubMed

    Heikkilä, T; Salonen, J; Tuura, J; Hamdy, M S; Mul, G; Kumar, N; Salmi, T; Murzin, D Yu; Laitinen, L; Kaukonen, A M; Hirvonen, J; Lehto, V-P

    2007-02-22

    For the first time the feasibility of siliceous mesoporous material TUD-1 (Technische Universiteit Delft) for drug delivery was studied. Model drug, ibuprofen, was adsorbed into TUD-1 mesopores via a soaking procedure. Characterizations with nitrogen adsorption, XRD, TG, HPLC and DSC demonstrated the successful inclusion of ibuprofen into TUD-1 host. The amount of ibuprofen adsorbed into the nanoreservoir of TUD-1 material was higher than reported for other mesoporous silica drug carriers (drug/carrier 49.5 wt.%). Drug release studies in vitro (HBSS buffer pH 5.5) demonstrated a fast and unrestricted liberation of ibuprofen, with 96% released at 210 min of the dissolution assay. The drug dissolution profile of TUD-1 material with the random, foam-like three-dimensional mesopore network and high accessibility to the dissolution medium was found to be much faster (kinetic constant k = 10.7) and more diffusion based (release constant n = 0.64) compared to a mesoporous MCM-41 material with smaller, unidirectional mesopore channels (k = 4.7, n = 0.71). Also, the mesoporous carriers were found to significantly increase the dissolution rate of ibuprofen, when compared to the pure crystalline form of the drug (k = 0.6, n = 0.96). TUD-1 was constituted as a potential drug delivery device with fast release property, with prospective applications in the formulation of poorly soluble drug compounds. PMID:17046183

  10. Silica-based mesoporous nanoparticles for controlled drug delivery.

    PubMed

    Kwon, Sooyeon; Singh, Rajendra K; Perez, Roman A; Abou Neel, Ensanya A; Kim, Hae-Won; Chrzanowski, Wojciech

    2013-01-01

    Drug molecules with lack of specificity and solubility lead patients to take high doses of the drug to achieve sufficient therapeutic effects. This is a leading cause of adverse drug reactions, particularly for drugs with narrow therapeutic window or cytotoxic chemotherapeutics. To address these problems, there are various functional biocompatible drug carriers available in the market, which can deliver therapeutic agents to the target site in a controlled manner. Among the carriers developed thus far, mesoporous materials emerged as a promising candidate that can deliver a variety of drug molecules in a controllable and sustainable manner. In particular, mesoporous silica nanoparticles are widely used as a delivery reagent because silica possesses favourable chemical properties, thermal stability and biocompatibility. Currently, sol-gel-derived mesoporous silica nanoparticles in soft conditions are of main interest due to simplicity in production and modification and the capacity to maintain function of bioactive agents. The unique mesoporous structure of silica facilitates effective loading of drugs and their subsequent controlled release. The properties of mesopores, including pore size and porosity as well as the surface properties, can be altered depending on additives used to fabricate mesoporous silica nanoparticles. Active surface enables functionalisation to modify surface properties and link therapeutic molecules. The tuneable mesopore structure and modifiable surface of mesoporous silica nanoparticle allow incorporation of various classes of drug molecules and controlled delivery to the target sites. This review aims to present the state of knowledge of currently available drug delivery system and identify properties of an ideal drug carrier for specific application, focusing on mesoporous silica nanoparticles. PMID:24020012

  11. Incorporation of antimicrobial compounds in mesoporous silica film monolith.

    PubMed

    Izquierdo-Barba, Isabel; Vallet-Regí, María; Kupferschmidt, Natalia; Terasaki, Osamu; Schmidtchen, Artur; Malmsten, Martin

    2009-10-01

    Incorporation of the antimicrobial peptide LL-37 (LLGDFFRKSKEKIGKEFKRIVQRIKDFLRNLVPRTES), as well as low molecular weight antimicrobial chlorhexidine, into mesoporous silica was obtained using an EISA one-pot synthesis method. FTIR confirmed efficient encapsulation of both LL-37 and chlorhexidine into mesoporous silica, while XRD and TEM showed that antimicrobial agent incorporation can be achieved without greatly affecting the structure of the mesoporous silica. The modified mesoporous silica released LL-37 and chlorhexidine slowly, reaching maximum release after about 200 h. The release rate could also be controlled through incorporation of SH groups in the pore walls, adding to pore hydrophobicity and reducing the release rate by about 50% compared to the unmodified mesoporous silica. Mesoporous silica containing either LL-37 or chlorhexidine displayed potent bactericidal properties against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. While chlorhexidine-loaded mesoporous silica displayed an accompanying high toxicity, as judged from hemolysis, LDH release, and MTT assay, the corresponding material containing LL-37 showed very low toxicity by all these assays, comparable to that observed for mesoporous silica in the absence of antibacterial drug, as well as to the negative controls in the respective assays. Mesoporous silica containing LL-37 therefore holds potential as an implantable material or a surface coating for such materials, as it combines potent bactericidal action with low toxicity, important features for controlling implant-related infections, e.g., for multi-resistant pathogens or for cases where access to the infection site of systemically administered antibiotics is limited due to collagen capsule formation or other factors. PMID:19628277

  12. Silica-based mesoporous nanoparticles for controlled drug delivery

    PubMed Central

    Kwon, Sooyeon; Singh, Rajendra K; Perez, Roman A; Abou Neel, Ensanya A

    2013-01-01

    Drug molecules with lack of specificity and solubility lead patients to take high doses of the drug to achieve sufficient therapeutic effects. This is a leading cause of adverse drug reactions, particularly for drugs with narrow therapeutic window or cytotoxic chemotherapeutics. To address these problems, there are various functional biocompatible drug carriers available in the market, which can deliver therapeutic agents to the target site in a controlled manner. Among the carriers developed thus far, mesoporous materials emerged as a promising candidate that can deliver a variety of drug molecules in a controllable and sustainable manner. In particular, mesoporous silica nanoparticles are widely used as a delivery reagent because silica possesses favourable chemical properties, thermal stability and biocompatibility. Currently, sol-gel-derived mesoporous silica nanoparticles in soft conditions are of main interest due to simplicity in production and modification and the capacity to maintain function of bioactive agents. The unique mesoporous structure of silica facilitates effective loading of drugs and their subsequent controlled release. The properties of mesopores, including pore size and porosity as well as the surface properties, can be altered depending on additives used to fabricate mesoporous silica nanoparticles. Active surface enables functionalisation to modify surface properties and link therapeutic molecules. The tuneable mesopore structure and modifiable surface of mesoporous silica nanoparticle allow incorporation of various classes of drug molecules and controlled delivery to the target sites. This review aims to present the state of knowledge of currently available drug delivery system and identify properties of an ideal drug carrier for specific application, focusing on mesoporous silica nanoparticles. PMID:24020012

  13. Distributions of noble metal Pd and Pt in mesoporous silica

    NASA Astrophysics Data System (ADS)

    Arbiol, J.; Cabot, A.; Morante, J. R.; Chen, Fanglin; Liu, Meilin

    2002-10-01

    Mesoporous silica nanostructures have been synthesized and loaded with Pd and Pt catalytic noble metals. It is found that Pd forms small nanoclusters (3-5 nm) on the surface of the mesoporous structure whereas Pt impregnation results in the inclusion of Pt nanostructures within the silica hexagonal pores (from nanoclusters to nanowires). It is observed that these materials have high catalytic properties for CO-CH4 combustion, even in a thick film form. In particular, results indicate that the Pt and Pd dispersed in mesoporous silica are catalytically active as a selective filter for gas sensors.

  14. Mesoporous Trimetallic PtPdRu Spheres as Superior Electrocatalysts.

    PubMed

    Jiang, Bo; Ataee-Esfahani, Hamed; Li, Cuiling; Alshehri, Saad M; Ahamad, Tansir; Henzie, Joel; Yamauchi, Yusuke

    2016-05-17

    Mesoporous Trimetallic PtPdRu Spheres with well-defined spherical morphology and uniformly sized pores were synthesized in an aqueous solution using ascorbic acid as the reducing agent and triblock copolymer F127 as the pore directing agent. These mesoporous PtPdRu spheres exhibited enhanced electrocatalytic activity compared to commercial Pt black, resulting in a ∼4.9 times improvement in mass activity for the methanol oxidation reaction. The excellent electrocatalytic activity and stability are due to the unique mesoporous architecture and electronic landscape between different elements. PMID:27072776

  15. Crystalline mesoporous zirconia catalysts having stable tetragonal pore wall structure

    DOEpatents

    Sachtler, Wolfgang M. H.; Huang, Yin-Yan

    1998-01-01

    Methods for the preparation of new sulfated mesoporous zirconia materials/catalysts with crystalline pore walls of predominantly tetragonal crystal structure, characterized by nitrogen physisorption measurement, X-ray diffraction, transmission electron microscopy and catalytic tests using n-butane isomerization to iso-butane and alkylation of 1-naphthol with 4-tert-butylstyrene as probe reactions. Sulfate deposition is preferred for the transformation of a mesoporous precursor with amorphous pore walls into a material with crystalline pore walls maintaining the mesoporous characteristics.

  16. Crystalline mesoporous zirconia catalysts having stable tetragonal pore wall structure

    DOEpatents

    Sachtler, W.M.H.; Huang, Y.Y.

    1998-07-28

    Methods are disclosed for the preparation of new sulfated mesoporous zirconia materials/catalysts with crystalline pore walls of predominantly tetragonal crystal structure, characterized by nitrogen physical sorption measurement, X-ray diffraction, transmission electron microscopy and catalytic tests using n-butane isomerization to iso-butane and alkylation of 1-naphthol with 4-tert-butylstyrene as probe reactions. Sulfate deposition is preferred for the transformation of a mesoporous precursor with amorphous pore walls into a material with crystalline pore walls maintaining the mesoporous characteristics. 17 figs.

  17. Synthesis of biomorphological mesoporous TiO2 templated by mimicking bamboo membrane in supercritical CO2.

    PubMed

    Li, Jinhong; Shi, Xiaoying; Wang, Lijuan; Liu, Fei

    2007-11-01

    A new approach is presented for preparing biomorphological mesoporous TiO2 templated by mimicking bamboo inner shell membrane via supercritical CO2 (SCCO2) transportation through titanium tetrabutyloxide (TTBO). The analysis of wide-angle X-ray powder diffraction (XRD) showed the prepared TiO2 in phase of anatase, and the small-angle XRD revealed the presence of mesopores without periodicity. The product exhibited the shape of crinkled films and extended in two dimensions up to centimeters. The electron microscopic observation showed that the TiO2 films were around 200 nm in thickness, and across the films there were numerous round or ellipse-shaped mesopores, being 10-50 nm in diameter, which were formed by the close packing of TiO2 particles. High-resolution transmission electron microscope (HRTEM) displayed that the single TiO2 particle size was about 12.5 nm. The UV-vis absorption spectrum was transparent in the wavelength of 320-350 nm for suspensions of the prepared mesoporous TiO2 in ethanol at the concentration of 5.0 mg/l. The mesoporous TiO2 prepared with the aid of SCCO2 exhibited an obvious blue shift compared with the TiO2 prepared by sol-gel infiltration. The possible mechanism for the formation of the mesoporous TiO2 is summarized into a biomimetic mineralization pathway. First, TTBO was transported to the membrane surface via SCCO2, and then condensed. Hydrolysis reactions between the functional groups of organic membrane and TTBO took place to form the nuclear TiO2, and the TiO2 seeds grew around the organic membrane into TiO2 mesoporous materials. The approach provides a low-cost and efficient route for the production of ceramics nanomaterials with unique structural features, which may have potential application in designing UV-selective shielding devices [S. Zhao, X.H. Wang, S.B. Xin, Q. Jiang, X.P. Liang, Rare Metal Mater. Eng. 35 (2006) 508-510]. PMID:17689547

  18. Gated Silica Mesoporous Materials in Sensing Applications.

    PubMed

    Sancenón, Félix; Pascual, Lluís; Oroval, Mar; Aznar, Elena; Martínez-Máñez, Ramón

    2015-08-01

    Silica mesoporous supports (SMSs) have a large specific surface area and volume and are particularly exciting vehicles for delivery applications. Such container-like structures can be loaded with numerous different chemical substances, such as drugs and reporters. Gated systems also contain addressable functions at openings of voids, and cargo delivery can be controlled on-command using chemical, biochemical or physical stimuli. Many of these gated SMSs have been applied for drug delivery. However, fewer examples of their use in sensing protocols have been reported. The approach of applying SMSs in sensing uses another concept-that of loading pores with a reporter and designing a capping mechanism that is selectively opened in the presence of a target analyte, which results in the delivery of the reporter. According to this concept, we provide herein a complete compilation of published examples of probes based on the use of capped SMSs for sensing. Examples for the detection of anions, cations, small molecules and biomolecules are provided. The diverse range of gated silica mesoporous materials presented here highlights their usefulness in recognition protocols. PMID:26491626

  19. Gated Silica Mesoporous Materials in Sensing Applications

    PubMed Central

    Sancenón, Félix; Pascual, Lluís; Oroval, Mar; Aznar, Elena; Martínez-Máñez, Ramón

    2015-01-01

    Silica mesoporous supports (SMSs) have a large specific surface area and volume and are particularly exciting vehicles for delivery applications. Such container-like structures can be loaded with numerous different chemical substances, such as drugs and reporters. Gated systems also contain addressable functions at openings of voids, and cargo delivery can be controlled on-command using chemical, biochemical or physical stimuli. Many of these gated SMSs have been applied for drug delivery. However, fewer examples of their use in sensing protocols have been reported. The approach of applying SMSs in sensing uses another concept—that of loading pores with a reporter and designing a capping mechanism that is selectively opened in the presence of a target analyte, which results in the delivery of the reporter. According to this concept, we provide herein a complete compilation of published examples of probes based on the use of capped SMSs for sensing. Examples for the detection of anions, cations, small molecules and biomolecules are provided. The diverse range of gated silica mesoporous materials presented here highlights their usefulness in recognition protocols. PMID:26491626

  20. Optically tunable chiral nematic mesoporous cellulose films.

    PubMed

    Schlesinger, Maik; Hamad, Wadood Y; MacLachlan, Mark J

    2015-06-21

    Demand for sustainable functional materials has never been larger. The introduction of functionality into pure cellulose might be one step forward in this field as it is one of the most abundant natural biopolymers. In this paper, we demonstrate a straightforward and scalable way to produce iridescent, mesoporous cellulose membranes with tunable colors and porosity. Concomitant assembly of cellulose nanocrystals (CNCs) and condensation of silica precursors results in CNC-silica composites with chiral nematic structures and tunable optical properties. Removal of the stabilizing silica matrix by alkaline or acid treatment gives access to novel chiral nematic mesoporous cellulose (CNMC) films. Importantly, the optical properties and the mesoporosity can be controlled by either varying the silica-to-CNC ratio, or by varying the substrate used during the evaporation-induced self-assembly process. In order to introduce additional functionality, CNMC has been used to stabilize gold nanoparticles with three different concentrations by wet impregnation. These materials are stable in water and can potentially function in sensors, tissue engineering or functional membranes. PMID:25972020

  1. Mesoporous carbon incorporated metal oxide nanomaterials as supercapacitor electrodes.

    PubMed

    Jiang, Hao; Ma, Jan; Li, Chunzhong

    2012-08-01

    Supercapacitors have attracted huge attention in recent years as they have the potential to satisfy the demand of both huge energy and power density in many advanced technologies. However, poor conductivity and cycling stability remains to be the major challenge for its widespread application. Various strategies have been developed for meeting the ever-increasing energy and power demands in supercapacitors. This Research News article aims to review recent progress in the development of mesoporous carbon incorporated metal oxide nanomaterials, especially metal oxide nanoparticles confined in ordered mesoporous carbon and 1D metal oxides coated with a layer of mesoporous carbon for high-performance supercapacitor applications. In addition, a recent trend in supercapacitor development - hierarchical porous graphitic carbons (HPGC) combining macroporous cores, mesoporous walls, and micropores as an excellent support for metal oxides - is also discussed. PMID:23030034

  2. Novel method to incorporate Si into monodispersed mesoporous carbon spheres.

    PubMed

    Yano, Kazuhisa; Tatsuda, Narihito; Masuda, Takashi; Shimoda, Tatsuya

    2016-10-01

    Liquid silicon precursor is used as a silicon source and very simple and easy method for the incorporation of Si into mesoporous carbon spheres is presented. By using capillary condensation, the liquid precursor, Cyclopentasilane, penetrates into mesopores of carbon spheres homogeneously and subsequent heating brings the decomposition of the precursor and the formation of silicon inside meso-channels of carbon even though the decomposition is done much higher than the boiling point of the precursor. The homogeneous distribution of silicon is verified by EDX mapping of the composite as well as SEM observation of the calcined one. More than 45wt% of Si can be incorporated into mesopores by just one operation. The Si@mesoporous carbon composite works as an anode for a Lithium ion battery. PMID:27344486

  3. Synthesis of mesoporous nano-hydroxyapatite by using zwitterions surfactant

    EPA Science Inventory

    Mesoporous nano-hydroxyapatite (mn-HAP) was successfully synthesized via a novel micelle-templating method using lauryl dimethylaminoacetic acid as zwitterionic surfactant. The systematic use of such a surfactant in combination with microwave energy inputenables the precise contr...

  4. Thermally stable crystalline mesoporous metal oxides with substantially uniform pores

    SciTech Connect

    Wiesner, Ulrich; Orilall, Mahendra Christopher; Lee, Jinwoo; DiSalvo, Jr., Francis J

    2015-01-27

    Highly crystalline metal oxide-carbon composites, as precursors to thermally stable mesoporous metal oxides, are coated with a layer of amorphous carbon. Using a `one-pot` method, highly crystalline metal oxide-carbon composites are converted to thermally stable mesoporous metal oxides, having highly crystalline mesopore walls, without causing the concomitant collapse of the mesostructure. The `one-pot` method uses block copolymers with an sp or sp 2 hybridized carbon containing hydrophobic block as structure directing agents which converts to a sturdy, amorphous carbon material under appropriate heating conditions, providing an in-situ rigid support which maintains the pores of the oxides intact while crystallizing at temperatures as high as 1000 deg C. A highly crystalline metal oxide-carbon composite can be heated to produce a thermally stable mesoporous metal oxide consisting of a single polymorph.

  5. Enzyme catalytic membrane based on a hybrid mesoporous membrane.

    PubMed

    Fu, Wensheng; Yamaguchi, Akira; Kaneda, Hideaki; Teramae, Norio

    2008-02-21

    Immobilization of glucose oxidase (GOD) within a hybrid mesoporous membrane with 12 nm pore diameter was successfully achieved, resulting in catalytically high efficiency during flow of a glucose solution across the membrane. PMID:18253526

  6. Mesoporous silica magnetite nanocomposite synthesized by using a neutral surfactant

    NASA Astrophysics Data System (ADS)

    Souza, K. C.; Salazar-Alvarez, G.; Ardisson, J. D.; Macedo, W. A. A.; Sousa, E. M. B.

    2008-05-01

    Magnetite nanoparticles coated by mesoporous silica were synthesized by an alternative chemical route using a neutral surfactant and without the application of any functionalization method. The magnetite (Fe3O4) nanoparticles were prepared by precipitation from aqueous media, and then coated with mesoporous silica by using nonionic block copolymer surfactants as the structure-directing agents. The mesoporous SiO2-coated Fe3O4 samples were characterized by x-ray diffraction, Fourier-transform infrared spectroscopy, N2 adsorption-desorption isotherms, transmission electron microscopy, 57Fe Mössbauer spectroscopy, and vibrating sample magnetometry. Our results revealed that the magnetite nanoparticles are completely coated by well-ordered mesoporous silica with free pores and stable (~8 nm thick) pore walls, and that the structural and magnetic properties of the Fe3O4 nanoparticles are preserved in the applied synthesis route.

  7. Near-infrared emission from mesoporous crystalline germanium

    NASA Astrophysics Data System (ADS)

    Boucherif, Abderraouf; Korinek, Andreas; Aimez, Vincent; Arès, Richard

    2014-10-01

    Mesoporous crystalline germanium was fabricated by bipolar electrochemical etching of Ge wafer in HF-based electrolyte. It yields uniform mesoporous germanium layers composed of high density of crystallites with an average size 5-7 nm. Subsequent extended chemical etching allows tuning of crystallites size while preserving the same chemical composition. This highly controllable nanostructure exhibits photoluminescence emission above the bulk Ge bandgap, in the near-infrared range (1095-1360nm) with strong evidence of quantum confinement within the crystallites.

  8. Simple synthesis of mesoporous boron nitride with strong cathodoluminescence emission

    SciTech Connect

    Meng, Xiang-Lin; Lun, Ning; Qi, Yong-Xin; Zhu, Hui-Ling; Han, Fu-Dong; Yin, Long-Wei; Fan, Run-Hua; Bai, Yu-Jun; Bi, Jian-Qiang

    2011-04-15

    Mesoporous BN was prepared at 550 {sup o}C for 10 h or so via a simple reaction between NaBH{sub 4} and CO(NH{sub 2}){sub 2}. X-ray diffraction demonstrates the formation of t-BN with lattice constants a=2.46 and c=6.67 A. High-resolution transmission electron microscopy displays a lot of porous films in the product, which possesses a high surface area of 219 m{sup 2} g{sup -1} and a pore size primarily around 3.8 nm tested by nitrogen adsorption-desorption method. The mesoporous BN exhibits a strong luminescence emission around 3.41 eV in the cathodoluminescence spectra, a high stability in both morphology and structure, and good oxidation resistance up to 800 {sup o}C. The byproducts generated during the reaction are responsible for the formation of the mesoporous BN. -- Graphical abstract: The mesoporous BN with a high specific surface area of 219 m{sup 2} g{sup -1} exhibits a strong luminescence emission around 3.41 eV in the CL spectra, high thermal stability in both morphology and structure, and good oxidation resistance up to 800 {sup o}C. Display Omitted Research highlights: Mesoporous BN was prepared by a simple reaction between NaBH{sub 4} and CO(NH{sub 2}){sub 2} at 550 {sup o}C. The mesoporous BN possesses a high surface area of 219 m{sup 2} g{sup -1}. The mesoporous BN exhibits a strong luminescence emission around 3.41 eV. The mesoporous BN has high stability and good oxidation resistance up to 800 {sup o}C.

  9. In-situ immobilization of enzymes in mesoporous silicas

    NASA Astrophysics Data System (ADS)

    Santalla, Esther; Serra, Elías; Mayoral, Alvaro; Losada, José; Blanco, Rosa M.; Díaz, Isabel

    2011-04-01

    Lipase from Candida antarctica B, horseradish peroxidase and laccase have been entrapped in silica cages rising mesoporous structures. Lipase and laccase yielded the highest structured mesoporous material whereas horseradish peroxidase may have altered the symmetry giving as a result mesocelullar foam (MCF) type of cages. The possible effect in the final structure of the material of the nature, size and surface structure of the proteins as well as the presence of various additives in the enzyme extracts is currently under investigations.

  10. Preparation, characterization, and electrochemical application of mesoporous copper oxide

    SciTech Connect

    Cheng, Liang; Shao, Mingwang; Chen, Dayan; Zhang, Yuzhong

    2010-02-15

    Mesoporous CuO was successfully synthesized via thermal decomposition of CuC{sub 2}O{sub 4} precursors. These products had ring-like morphology, which was made up of nanoparticles with the average diameter of 40 nm. The electrochemical experiments showed that the mesoporous CuO decreased the overvoltage of the electrode and increased electron transference in the measurement of dopamine.

  11. Near-infrared emission from mesoporous crystalline germanium

    SciTech Connect

    Boucherif, Abderraouf; Aimez, Vincent; Arès, Richard; Korinek, Andreas

    2014-10-15

    Mesoporous crystalline germanium was fabricated by bipolar electrochemical etching of Ge wafer in HF-based electrolyte. It yields uniform mesoporous germanium layers composed of high density of crystallites with an average size 5-7 nm. Subsequent extended chemical etching allows tuning of crystallites size while preserving the same chemical composition. This highly controllable nanostructure exhibits photoluminescence emission above the bulk Ge bandgap, in the near-infrared range (1095-1360nm) with strong evidence of quantum confinement within the crystallites.

  12. Multifluorescently traceable nanoparticle by a single-wavelength excitation with color-related drug release performance.

    PubMed

    Lu, Deli; Lei, Juying; Wang, Lingzhi; Zhang, Jinlong

    2012-05-30

    Monodisperse and nanometer-sized periodic mesoporous organosilicas co-doped with fluorescence resonance energy transfer cascades composed of triple fluorophores at various ratios were prepared. These nanoparticles exhibit multifluorescent emissions by a single-wavelength excitation and were designed for the application as multichannelly traceable drug carriers. Different from the hydrophilic framework of inorganic mesoporous silica and hydrophobic framework of mesoporous carbon, these multifluorescent nanoparticles have intrinsically different and finely tunable pore surface polarities governed by the type and amount of fluorophore inside the framework. When applied as drug carriers, they can achieve synchronous or asynchronous release of different drugs by simply choosing different colored nanoparticles. These colorful mesoporous composites with finely tunable color-related drug release performance provide a strong barcoding system for the potential applications of fluorescent nanoparticles in effective screening of drugs and therapeutic protocols for diseases. PMID:22591275

  13. Antibacterial mesoporous molecular sieves modified with polymeric N-halamine.

    PubMed

    Wang, Yingfeng; Li, Lin; Liu, Ying; Ren, Xuehong; Liang, Jie

    2016-12-01

    In this research, a new kind of porous N-halamine material with high antibacterial efficacies was prepared. Poly [5,5-dimethyl-3-(3'-triethoxysilylpropyl)-hydantoin] (PSPH), an N-halamine precursor, was synthesized and grafted onto the surface of mesoporous molecular sieves (SBA-15). The mesoporous molecular sieves modified with the N-halamine polymer could be rendered biocidal upon exposure to dilute household bleach. The modified mesoporous molecular sieves were characterized by SEM, TEM, FTIR, XPS, TGA, XRD and BET analysis. It was found that the PSPH has been successfully grafted on the surface of mesoporous molecular sieves, and the morphology and structure of the modified mesoporous molecular sieves were slightly affected. The N-halamine modified mesoporous molecular sieves showed excellent antibacterial property, and inactivated 100% of S. aureus and E. coli O157:H7 with 8.05 and 7.92 log reductions within 1min of contact, respectively. The modified SBA-15 with high-antibacterial efficiency has potential application in water treatment and biomaterials areas. PMID:27612805

  14. Visible Light Enabled Photocatalytic Splitting of Water over Spatially Isolated Semiconductors Supported Mesoporous Materials

    NASA Astrophysics Data System (ADS)

    Peng, Rui

    Hydrogen generation from photocatalytic splitting of water is an ideal scenario that possesses promise for the sustainable development of human society and the establishment of the ultimate "green," infinitely renewable energy system. This work contains a series of novel photocatalytic systems in which the photoactive chromophores and/or the co-catalysts were incorporated into highly periodically cubic-phased MCM-48 mesoporous materials to achieve significantly higher photocatalytic efficiencies compared with conventional semiconductor photocatalysts. Cubic-phased MCM-48 mesoporous materials were chosen as supports to accommodate the photoactive species throughout the entire work. Several unique and iconic properties of these materials, such as large surface area, highly uniform mesoscale pores arrayed in a long-range periodicity, and an interconnected network of three-dimensional sets of pores that were recognized as positive parameters facilitated the photogenerated charge transfer and promoted the photocatalytic performance of the encapsulated photoactive species. It was validated that in the CdS/TiO2-incorporated MCM-48 photocatalytic system, the solar hydrogen conversion efficiency was prevalently governed by the photogenerated electron injection efficiency from the CdS conduction band to that of TiO2. The use of MCM-48 mesoporous host materials enabled the high and even dispersion of both CdS and TiO 2 so that the intimate and sufficient contact between CdS and TiO 2 was realized. In addition, with the presence of both TiO2 and MCM-48 mesoporous support, the photostability of CdS species was dramatically enhanced compared with that of bare CdS or CdS-incorporated MCM-48 photocatalysts. In advance, by loading the RuO2 co-catalyst into the CdS/TiO 2-incorporated MCM-48 photocatalytic system, the photocatalytic splitting of pure water to generate both hydrogen and oxygen under visible light illumination was achieved. In the various Pd-assisted, TiO2-incorporated

  15. Grafting Sulfated Zirconia on Mesoporous Silica

    SciTech Connect

    Wang, Yong; Lee, Kwan Young; Choi, Saemin; Liu, Jun; Wang, Li Q.; Peden, Charles HF

    2007-06-01

    Sulfated zirconia has received considerable attention as a potential solid acid catalyst in recent years. In this paper, the preparation and properties of acid catalysts obtained by grafting ziconia with atomic precision on MCM-41 mesoporous silica were studied. TEM and potential titration characterizations revealed that ZrO2/MCM-41 with monolayer coverage can be obtained using this grafting technique. Sulfated ZrO2/MCM-41 exhibits improved thermal stability than that of bulk sulfated zirconia, as evidenced by temperature programmed characterizations and XRD analysis. Temperature programmed reaction of isopropanol was used to evaluate the acidity of sulfated ZrO2/MCM-41. It was found that the acid strength of sulfated ZrO2/MCM-41 with monolayer coverage is weaker than bulk sulfated zirconia but stronger than SiO2-Al2O3, a common strong acid catalyst.

  16. Enantioselective recognition at mesoporous chiral metal surfaces

    PubMed Central

    Wattanakit, Chularat; Côme, Yémima Bon Saint; Lapeyre, Veronique; Bopp, Philippe A.; Heim, Matthias; Yadnum, Sudarat; Nokbin, Somkiat; Warakulwit, Chompunuch; Limtrakul, Jumras; Kuhn, Alexander

    2014-01-01

    Chirality is widespread in natural systems, and artificial reproduction of chiral recognition is a major scientific challenge, especially owing to various potential applications ranging from catalysis to sensing and separation science. In this context, molecular imprinting is a well-known approach for generating materials with enantioselective properties, and it has been successfully employed using polymers. However, it is particularly difficult to synthesize chiral metal matrices by this method. Here we report the fabrication of a chirally imprinted mesoporous metal, obtained by the electrochemical reduction of platinum salts in the presence of a liquid crystal phase and chiral template molecules. The porous platinum retains a chiral character after removal of the template molecules. A matrix obtained in this way exhibits a large active surface area due to its mesoporosity, and also shows a significant discrimination between two enantiomers, when they are probed using such materials as electrodes. PMID:24548992

  17. Mesoporous titanium dioxide coating for metallic implants.

    PubMed

    Xia, Wei; Grandfield, Kathryn; Hoess, Andreas; Ballo, Ahmed; Cai, Yanling; Engqvist, Håkan

    2012-01-01

    A bioactive mesoporous titanium dioxide (MT) coating for surface drug delivery has been investigated to develop a multifunctional implant coating, offering quick bone bonding and biological stability. An evaporation induced self-assembly (EISA) method was used to prepare a mesoporous titanium dioxide coating of the anatase phase with BET surface area of 172 m(2)/g and average pore diameter of 4.3 nm. Adhesion tests using the scratch method and an in situ screw-in/screw-out technique confirm that the MT coating bonds tightly with the metallic substrate, even after removal from bone. Because of its high surface area, the bioactivity of the MT coating is much better than that of a dense TiO(2) coating of the same composition. Quick formation of hydroxyapatite (HA) in vitro can be related to enhance bonding with bone. The uptake of antibiotics by the MT coating reached 13.4 mg/cm(3) within a 24 h loading process. A sustained release behavior has been obtained with a weak initial burst. By using Cephalothin as a model drug, drug loaded MT coating exhibits a sufficient antibacterial effect on the material surface, and within millimeters from material surface, against E.coli. Additionally, the coated and drug loaded surfaces showed no cytotoxic effect on cell cultures of the osteoblastic cell line MG-63. In conclusion, this study describes a novel, biocompatiblemesoporous implant coating, which has the ability to induce HA formation and could be used as a surface drug-delivery system. PMID:21954047

  18. Single crystal particles of a mesoporous mixed transition metal oxide with a wormhole structure.

    PubMed

    Lee, B; Lu, D; Kondo, J N; Domen, K

    2001-10-21

    A new type of mesoporous mixed transition metal oxide of Nb and Ta (NbTa-TIT-1) has been prepared through a two-step calcination, which consists of single crystal particles with wormhole mesoporous structure. PMID:12240191

  19. Enhanced retention of aqueous transition metals in mesoporous silica

    NASA Astrophysics Data System (ADS)

    Nelson, J.; Bargar, J.; Brown, G. E.; Maher, K.

    2013-12-01

    Mesoporosity (2-50 nm diameter pores) is abundant within grain coatings and primary silicate minerals in natural environments. Mesopores often contribute significantly to total specific surface area and act as gateways for the transport of subsurface solutes, including nutrients and contaminants, between mineral surfaces and ambient fluids. However, the physiochemical mechanisms of sorption and transport within mesopores cannot be assumed to be the same as for macropores (>50 nm), because of confinement-induced changes in water properties, the structure of electrical double layers, solvation shells and dehydration rates of aquo ions, and the charge and reactive site densities of mineral surfaces. Despite the ubiquity of confined spaces in natural and industrial porous media, few studies have examined the molecular-scale mechanisms and geochemical reactions controlling meso-confinement phenomena in environmentally relevant materials. We conducted batch Zn sorption experiments using synthetic, controlled pore-size (i.e., 7.5-300 nm), metal-oxide beads as model geologic substrates. Comparison of Zn adsorbed onto macroporous and mesoporous silica beads indicates Zn adsorption capacity is increased in mesopores when normalized to surface area. In the presence of a background electrolyte (i.e., NaCl), Zn sorption capacity to macroporous silica is reduced; however, no significant difference in Zn sorption capacity on mesoporous silica was observed between the presence and absence of a background electrolyte. The effect of competing cations is indirect evidence that mesopores promote inner-sphere complexation and reduce outer-sphere complexation. EXAFS characterization of adsorbed zinc to macroporous silica matches that reported for low Zn coverages on silica (Roberts et al., JCIS, 2003), whereas a different spectrum is observed for the mesoporous case. Shell-by-shell fitting indicates that Zn is dominantly in octahedral coordination in macropores, as opposed to

  20. The Synthesis of Ag-Doped Mesoporous TiO2

    SciTech Connect

    Li, Xiaohong S.; Fryxell, Glen E.; Wang, Chong M.; Engelhard, Mark H.

    2008-04-15

    Ag-doped mesoporous titanium oxide was prepared using non-ionic surfactants and easily handled titanium precursors, under mild reaction conditions. In contrast to the stabilizing effect of Cd-doping on mesoporous TiO2, Ag-doping was found to significantly destabilize the mesoporous structure.

  1. Application of ordered mesoporous carbon in solid phase microextraction for fast mass transfer and high sensitivity.

    PubMed

    Zheng, Juan; Wang, Kun; Liang, Yeru; Zhu, Fang; Wu, Dingcai; Ouyang, Gangfeng

    2016-05-21

    Due to unique high-surface-area ordered mesoporous channels interconnected with 3D network-like mesopores and π-π interactions between carbon frameworks and analytes, the as-prepared ordered mesoporous carbon-coated fiber exhibited a large adsorption amount, fast mass transport and high sensitivity. PMID:27137527

  2. Direct coating of mesoporous titania on CTAB-capped gold nanorods.

    PubMed

    Zhao, Junwei; Xu, Pengyu; Li, Yue; Wu, Jian; Xue, Junfei; Zhu, Qiannan; Lu, Xuxing; Ni, Weihai

    2016-03-14

    We demonstrate a CTAB-templated approach towards direct coating of mesoporous titania on gold nanorods in aqueous solutions. The formation of the mesoporous shell is found to be closely correlated with CTAB concentration and the amount of the titania precursor. This approach can be readily extended to form mesoporous titania shells on other CTAB-capped nanoparticles. PMID:26585611

  3. Irregular Periods

    MedlinePlus

    ... number of days after the last one. The Menstrual Cycle Most girls get their first period between the ... to skip periods or to have an irregular menstrual cycle. Illness, rapid weight change, or stress can also ...

  4. Mesoporous materials used in medicine and environmental applications.

    PubMed

    Gunduz, Oguzhan; Yetmez, Mehmet; Sonmez, Maria; Georgescu, Mihai; Alexandrescu, Laura; Ficai, Anton; Ficai, Denisa; Andronescu, Ecaterina

    2015-01-01

    Mesoporous materials synthesized in the presence of templates, are commonly used for environment and medical applications. Due to the properties it holds, mesoporous silica nanoparticles is an excellent material for use in medical field, biomaterials, active principles delivery systems, enzyme immobilization and imaging. Their structure allows embedding large and small molecules, DNA adsorption and genetic transfer. Using mesoporous silica nanoparticles for delivery of bioactive molecules can protect them against degradation under physiological conditions, allow controlled drugs release and minimize side effects on healthy tissues. Cellular tests performed on mesoporous silica nanoparticles demonstrate that MSN's cytotoxicity is dependent on the size and concentration and suggests the use of larger size nanoparticles is optimal for medical applications. Mesoporous materials possess high biological compatibility, are non-toxic and can be easily modified by functionalizing the surface or inside the pores by grafting or co-condensation method. The structure, composition and pores size of this material can be optimized during synthesis by varying the stoichiometric reactants, reaction conditions, nature of the template's molecules or by functionalization method. PMID:25877095

  5. Design and functionalization of photocatalytic systems within mesoporous silica.

    PubMed

    Qian, Xufang; Fuku, Kojirou; Kuwahara, Yasutaka; Kamegawa, Takashi; Mori, Kohsuke; Yamashita, Hiromi

    2014-06-01

    In the past decades, various photocatalysts such as TiO2, transition-metal-oxide moieties within cavities and frameworks, or metal complexes have attracted considerable attention in light-excited catalytic processes. Owing to high surface areas, transparency to UV and visible light as well as easily modified surfaces, mesoporous silica-based materials have been widely used as excellent hosts for designing efficient photocatalytic systems under the background of environmental remediation and solar-energy utilization. This Minireview mainly focuses on the surface-chemistry engineering of TiO2/mesoporous silica photocatalytic systems and fabrication of binary oxides and nanocatalysts in mesoporous single-site-photocatalyst frameworks. Recently, metallic nanostructures with localized surface plasmon resonance (LSPR) have been widely studied in catalytic applications harvesting light irradiation. Accordingly, silver and gold nanostructures confined in mesoporous silica and their corresponding catalytic activity enhanced by the LSPR effect will be introduced. In addition, the integration of metal complexes within mesoporous silica materials for the construction of functional inorganic-organic supramolecular photocatalysts will be briefly described. PMID:24828540

  6. Formation of monodisperse mesoporous silica microparticles via spray-drying.

    PubMed

    Waldron, Kathryn; Wu, Winston Duo; Wu, Zhangxiong; Liu, Wenjie; Selomulya, Cordelia; Zhao, Dongyuan; Chen, Xiao Dong

    2014-03-15

    In this work, a protocol to synthesize monodisperse mesoporous silica microparticles via a unique microfluidic jet spray-drying route is reported for the first time. The microparticles demonstrated highly ordered hexagonal mesostructures with surface areas ranging from ~900 up to 1500 m(2)/g and pore volumes from ~0.6 to 0.8 cm(3)/g. The particle size could be easily controlled from ~50 to 100 μm from the same diameter nozzle via changing the initial solute content, or changing the drying temperature. The ratio of the surfactant (CTAB) and silica (TEOS), and the amount of water in the precursor were found to affect the degree of ordering of mesopores by promoting either the self-assembly of the surfactant-silica micelles or the condensation of the silica as two competing processes in evaporation induced self-assembly. The drying rate and the curvature of particles also affected the self-assembly of the mesostructure. The particle mesostructure is not influenced by the inlet drying temperature in the range of 92-160 °C, with even a relatively low temperature of 92 °C producing highly ordered mesoporous microparticles. The spray-drying derived mesoporous silica microparticles, while of larger sizes and more rapidly synthesized, showed a comparable performance with the conventional mesoporous silica MCM-41 in controlled release of a dye, Rhodamine B, indicating that these spray dried microparticles could be used for the immobilisation and controlled release of small molecules. PMID:24461839

  7. Mesoporous silica nanoparticles in target drug delivery system: A review

    PubMed Central

    Bharti, Charu; Nagaich, Upendra; Pal, Ashok Kumar; Gulati, Neha

    2015-01-01

    Due to lack of specification and solubility of drug molecules, patients have to take high doses of the drug to achieve the desired therapeutic effects for the treatment of diseases. To solve these problems, there are various drug carriers present in the pharmaceuticals, which can used to deliver therapeutic agents to the target site in the body. Mesoporous silica materials become known as a promising candidate that can overcome above problems and produce effects in a controllable and sustainable manner. In particular, mesoporous silica nanoparticles (MSNs) are widely used as a delivery reagent because silica possesses favorable chemical properties, thermal stability, and biocompatibility. The unique mesoporous structure of silica facilitates effective loading of drugs and their subsequent controlled release of the target site. The properties of mesoporous, including pore size, high drug loading, and porosity as well as the surface properties, can be altered depending on additives used to prepare MSNs. Active surface enables functionalization to changed surface properties and link therapeutic molecules. They are used as widely in the field of diagnosis, target drug delivery, bio-sensing, cellular uptake, etc., in the bio-medical field. This review aims to present the state of knowledge of silica containing mesoporous nanoparticles and specific application in various biomedical fields. PMID:26258053

  8. Oxidative nanopatterning of titanium generates mesoporous surfaces with antimicrobial properties

    PubMed Central

    Variola, Fabio; Zalzal, Sylvia Francis; Leduc, Annie; Barbeau, Jean; Nanci, Antonio

    2014-01-01

    Mesoporous surfaces generated by oxidative nanopatterning have the capacity to selectively regulate cell behavior, but their impact on microorganisms has not yet been explored. The main objective of this study was to test the effects of such surfaces on the adherence of two common bacteria and one yeast strain that are responsible for nosocomial infections in clinical settings and biomedical applications. In addition, because surface characteristics are known to affect bacterial adhesion, we further characterized the physicochemical properties of the mesoporous surfaces. Focused ion beam (FIB) was used to generate ultrathin sections for elemental analysis by energy-dispersive X-ray spectroscopy (EDS), nanobeam electron diffraction (NBED), and high-angle annular dark field (HAADF) scanning transmission electron microscopy (STEM) imaging. The adherence of Staphylococcus aureus, Escherichia coli and Candida albicans onto titanium disks with mesoporous and polished surfaces was compared. Disks with the two surfaces side-by-side were also used for direct visual comparison. Qualitative and quantitative results from this study indicate that bacterial adhesion is significantly hindered by the mesoporous surface. In addition, we provide evidence that it alters structural parameters of C. albicans that determine its invasiveness potential, suggesting that microorganisms can sense and respond to the mesoporous surface. Our findings demonstrate the efficiency of a simple chemical oxidative treatment in generating nanotextured surfaces with antimicrobial capacity with potential applications in the implant manufacturing industry and hospital setting. PMID:24872694

  9. Organized thiol functional groups in mesoporous core shell colloids

    SciTech Connect

    Marchena, Martin H.; Granada, Mara; Bordoni, Andrea V.; Joselevich, Maria; Troiani, Horacio; Williams, Federico J.; Wolosiuk, Alejandro

    2012-03-15

    The co-condensation in situ of tetraethoxysilane (TEOS) and mercaptopropyltrimethoxysilane (MPTMS) using cetyltrimethylammonium bromide (CTAB) as a template results in the synthesis of multilayered mesoporous structured SiO{sub 2} colloids with 'onion-like' chemical environments. Thiol groups were anchored to an inner selected SiO{sub 2} porous layer in a bilayered core shell particle producing different chemical regions inside the colloidal layered structure. X-Ray Photoelectron Spectroscopy (XPS) shows a preferential anchoring of the -SH groups in the double layer shell system, while porosimetry and simple chemical modifications confirm that pores are accessible. We can envision the synthesis of interesting colloidal objects with defined chemical environments with highly controlled properties. - Graphical abstract: Mesoporous core shell SiO{sub 2} colloids with organized thiol groups. Highlights: Black-Right-Pointing-Pointer Double shell mesoporous silica colloids templated with CTAB. Black-Right-Pointing-Pointer Sequential deposition of mesoporous SiO{sub 2} layers with different chemistries. Black-Right-Pointing-Pointer XPS shows the selective functionalization of mesoporous layers with thiol groups.

  10. DEVELOPMENT OF MESOPOROUS MEMBRANE MATERIALS FOR CO2 SEPARATION

    SciTech Connect

    Wei-Heng Shih; Qiang Zhao; Nanlin Wang

    2002-05-01

    Mesoporous and precipitated alumina were synthesized as the base material for CO{sub 2} adsorbent. The porous alumina is doped with Ba to enhance it CO{sub 2} affinity due to the basicity of Ba. it is shown by gas chromatograph (GC) that the addition of Ba enhances the separation CO{sub 2} from N{sub 2}. It was found that mesoporous alumina has larger specific surface area and better selectivity of CO{sub 2} than precipitated alumina. Ba improves the affinity of mesoporous alumina with CO{sub 2}. Phase may play an important role in selective adsorption of CO{sub 2}. It is speculated that mesoporous alumina is more reactive than precipitated alumina creating the xBaO {center_dot} Al{sub 2}O{sub 3} phase that may be more affinity to CO{sub 2} than N{sub 2}. On the other hand, the barium aluminate phase (Ba{sub 3}Al{sub 2}O{sub 6}) in the mesoporous sample does not help the adsorption of CO{sub 2}.

  11. Oxidative nanopatterning of titanium generates mesoporous surfaces with antimicrobial properties.

    PubMed

    Variola, Fabio; Zalzal, Sylvia Francis; Leduc, Annie; Barbeau, Jean; Nanci, Antonio

    2014-01-01

    Mesoporous surfaces generated by oxidative nanopatterning have the capacity to selectively regulate cell behavior, but their impact on microorganisms has not yet been explored. The main objective of this study was to test the effects of such surfaces on the adherence of two common bacteria and one yeast strain that are responsible for nosocomial infections in clinical settings and biomedical applications. In addition, because surface characteristics are known to affect bacterial adhesion, we further characterized the physicochemical properties of the mesoporous surfaces. Focused ion beam (FIB) was used to generate ultrathin sections for elemental analysis by energy-dispersive X-ray spectroscopy (EDS), nanobeam electron diffraction (NBED), and high-angle annular dark field (HAADF) scanning transmission electron microscopy (STEM) imaging. The adherence of Staphylococcus aureus, Escherichia coli and Candida albicans onto titanium disks with mesoporous and polished surfaces was compared. Disks with the two surfaces side-by-side were also used for direct visual comparison. Qualitative and quantitative results from this study indicate that bacterial adhesion is significantly hindered by the mesoporous surface. In addition, we provide evidence that it alters structural parameters of C. albicans that determine its invasiveness potential, suggesting that microorganisms can sense and respond to the mesoporous surface. Our findings demonstrate the efficiency of a simple chemical oxidative treatment in generating nanotextured surfaces with antimicrobial capacity with potential applications in the implant manufacturing industry and hospital setting. PMID:24872694

  12. Photocatalytic activity of a hierarchically macro/mesoporous titania.

    PubMed

    Wang, Xinchen; Yu, Jimmy C; Ho, Chunman; Hou, Yidong; Fu, Xianzhi

    2005-03-15

    Light-harvesting macroporous channels have been successfully incorporated into a mesoporous TiO(2) framework to increase its photocatalytic activity. This bimodal porous material was characterized by X-ray diffractometry in both low-angle and wide-angle ranges, N(2) adsorption-desorption analysis, scanning and transmission electron microscopy, FT-IR, and diffuse reflectance spectroscopy. Ethylene photodegradation in gas-phase medium was employed as a probe reaction to evaluate the photocatalytic reactivity of the catalysts. The results reveal that sintering temperature significantly affects the structural stability and photocatalytic activity of titania. The catalyst which calcined at 350 degrees C possessed an intact macro/mesoporous structure and showed photocatalytic reactivity about 60% higher than that of commercial P25 titania. When the sample was calcined at 500 degrees C, the macroporous structure was retained but the mesoporous structure was partly destroyed. Further heating at temperatures above 600 degrees C destroyed both macro- and mesoporous structures, accompanied by a loss in photocatalytic activity. The high photocatalytic performance of the intact macro/mesoporous TiO(2) may be explained by the existence of macrochannels that increase photoabsorption efficiency and allow efficient diffusion of gaseous molecules. PMID:15752052

  13. Synthesis of highly ordered mesoporous alumina thin films and their framework crystallization to γ-alumina phase.

    PubMed

    Jiang, Xiangfen; Oveisi, Hamid; Nemoto, Yoshihiro; Suzuki, Norihiro; Wu, Kevin C-W; Yamauchi, Yusuke

    2011-11-01

    Here we report the preparation of highly ordered mesoporous alumina films existing both as P6(3)/mmc and Fm-3m mesostructures by using triblock copolymer Pluronic P123 as the structure-directing agent. 2D grazing-incidence small-angle X-ray scattering (GI-SAXS) completely proves the existence of two different mesopore structures (i.e., [001]-oriented P6(3)/mmc and [111]-oriented Fm-3m symmetries). After calcination at 1000 °C, the amorphous alumina framework is successfully converted to γ-alumina crystals. During the crystallization process, large uniaxial shrinkage occurs along the direction perpendicular to the substrate with the retention of horizontal mesoscale periodicity, thereby resulting in formation of partially vertical mesoporosity in the film. Through detailed electron microscopic study, we discuss the formation mechanism for the vertical mesoporosity upon calcination. The obtained mesoporous γ-alumina film shows high thermal stability up to 1000 °C, which is highly useful in wide research areas such as catalyst supports and separators. PMID:21603720

  14. Organically functionalized mesoporous silica as a support for synthesis and catalysis

    NASA Astrophysics Data System (ADS)

    McEleney, Kevin Andrew

    Mesoporous silicates are excellent materials for supported catalysis due to their ease of functionalization, tunable pore size and high surface areas. Mesoporous silicates have been utilized in a variety of applications such as drug delivery scaffolds and catalyst supports. Functionalization of the surface can be achieved by either grafting of alkoxy silanes or co-condensation of the organosilane with the inorganic silica source. My research in this area can be divided into two components. In the first, we address the significant issue of metal contamination after reactions that are catalyzed by transition metals. In the second, we examine the design of new catalysts based on organic/inorganic composites. Ruthenium catalyzed processes such as olefin metathesis or asymmetric hydrogenation, are often underutilized due to the difficulty of removing the ruthenium by-products. Attempts to remove ruthenium involve treating the solution with a scavenging reagent followed by silica chromatography. Often these scavenging agents are expensive phosphines or toxic agents like lead tetra-acetate. SBA-15 functionalized with aminopropyl triethoxysilane displays a high affinity for ruthenium. Furthermore, it can be utilized to remove ruthenium by-products from olefin metathesis or hydrogenation reactions without the need for silica chromatography. We have also prepared sulfur-functionalized mesoporous silicates that have a high affinity for palladium. The materials after loading prove to be active catalysts for a variety of palladium catalyzed processes such as Suzuki-Miyaura and Sonogashira couplings. The catalysts are recyclable with moderate loss of activity and structure, depending on the method of incorporation of the thiol. We have characterized the as-synthesized and used catalysts by nitrogen sorption, TEM, X-ray photoelectron spectroscopy (XPS) and a variety of homogeneity tests were performed on the catalysts. Periodic mesoporous organosilicates (PMOs) are a well known

  15. Synthesis of continuous mesoporous alumina films with large-sized cage-type mesopores by using diblock copolymers.

    PubMed

    Jiang, Xiangfen; Suzuki, Norihiro; Bastakoti, Bishnu Prasad; Wu, Kevin C-W; Yamauchi, Yusuke

    2012-06-01

    Mesoporous alumina films with large-sized cage-type mesopores were prepared by using commercially available diblock copolymer (PS-b-PEO) and economic inorganic salt (AlCl(3)) as aluminum source. The obtained mesopore sizes drastically expand from 35 nm to 80 nm when the amount of ethanol in the precursor solutions were controlled. More interestingly, under an optimized amount of ethanol as co-solvent, there was no significant change of micelle morphology on the substrate, even though the relative amount of PS-b-PEO to alumina source was dramatically varied. When the amount of alumina precursor was decreased, the pore walls gradually became thinner, thereby improving pore connectivity. The ordered mesoporous alumina films obtained in this study exhibit high thermal stability up to 1000 °C, and their frameworks are successfully crystallized to γ-alumina phase. This technique could also be applicable for creating other metal oxide thin films with large mesopores. PMID:22556035

  16. Highly Loaded Mesoporous Silica/Nanoparticle Composites and Patterned Mesoporous Silica Films

    NASA Astrophysics Data System (ADS)

    Kothari, Rohit; Hendricks, Nicholas R.; Wang, Xinyu; Watkins, James J.

    2014-03-01

    Novel approaches for the preparation of highly filled mesoporous silica/nanoparticle (MS/NP) composites and for the fabrication of patterned MS films are described. The incorporation of iron platinum NPs within the walls of MS is achieved at high NP loadings by doping amphiphilic poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) (Pluronic®) copolymer templates via selective hydrogen bonding between the pre-synthesized NPs and the hydrophilic portion of the block copolymer. The MS is then synthesized by means of phase selective condensation of tetraethylorthosilicate (TEOS) within the NP loaded block copolymer templates dilated with supercritical carbon dioxide (scCO2) followed by calcination. For patterned films, microphase separated block copolymer/small molecule additive blends are patterned using UV-assisted nanoimprint lithography. Infusion and condensation of a TEOS within template films using ScCO2 as a processing medium followed by calcination yields the patterned MS films. Scanning electron microscopy is used characterize pattern fidelity and transmission electron microscopy analysis confirms the presence of the mesopores. Long range order in nanocomposites is confirmed by low angle x-ray diffraction.

  17. Diffusion-Controlled Drug Release From the Mesoporous Magnesium Carbonate Upsalite(®).

    PubMed

    Zhang, Peng; Zardán Gómez de la Torre, Teresa; Forsgren, Johan; Bergström, Christel A S; Strømme, Maria

    2016-02-01

    In vitro drug release from well-defined particle-size fractions of the mesoporous magnesium carbonate material Upsalite(®) was investigated in detail using ibuprofen, a biopharmaceutics classification system class II drug, as the model compound. The weight of loaded drug corresponded to 30% of the weight of the carrier and the pores were filled to approximately 80%. The incorporated ibuprofen was found to be in an amorphous state and was physisorbed, rather than chemisorbed, to the surfaces of the pore walls. In contrast to ibuprofen in mesoporous silica, there was no detectable drug on the outer surface of the carrier particles. Two ibuprofen doses were loaded into Upsalite(®) particles with size fractions ranging from 25 μm to more than 200 μm. The initial release rate was controlled by the particle size; the dissolution rate of the loaded ibuprofen during this period was more than four times faster than that of the crystalline drug. An extended-release period of about 24 h followed the initial rapid-release period. The features of this extended-release period were dependent on the total drug concentration in the release medium. Detailed analysis of the diffusion of ibuprofen in Upsalite(®) provided the ibuprofen diffusion coefficient (9.8 × 10(-8) cm(2)/s), the constrictivity of the diffusion process (0.47) and the tortuosity of the carrier (15). This relatively high tortuosity value indicates that Upsalite(®) can be used not only to enhance the dissolution rate of poorly soluble drugs but also as a carrier in sustained-release applications by using larger particle sizes or even pellets of the material. PMID:26087956

  18. One-pot synthesis of mesoporous structured ratiometric fluorescence molecularly imprinted sensor for highly sensitive detection of melamine from milk samples.

    PubMed

    Xu, Shoufang; Lu, Hongzhi

    2015-11-15

    A facile strategy was developed to prepare mesoporous structured ratiometric fluorescence molecularly imprinted sensor for highly sensitive and selective determination of melamine using CdTe QDs as target sensitive dye and hematoporphyrin as reference dyes. One-pot synthesis method was employed because it could simplify the imprinting process and shorten the experimental period. The as-prepared fluorescence MIPs sensor, which combined ratiometric fluorescence technique with mesoporous silica materials into one system, exhibited excellent selectivity and sensitivity. Under optimum conditions, these mesoporous structured ratiometric fluorescence MIP@QDs sensors showed detection limit as low as 38 nM, which was much lower than those non-mesoporous one. The recycling process was sustainable at least 10 times without obvious efficiency decrease. The feasibility of the developed method in real samples was successfully evaluated through the analysis of melamine in raw milk and milk powder samples with satisfactory recoveries of 92-101%. The developed method proposed in this work proved to be a convenient, rapid, reliable and practical way to prepared high sensitive and selective fluorescence sensors with potentially applicable for trace pollutants analysis in complicated samples. PMID:26057736

  19. Actinide sequestration using self-assembled monolayers on mesoporous supports.

    PubMed

    Fryxell, Glen E; Lin, Yuehe; Fiskum, Sandy; Birnbaum, Jerome C; Wu, Hong; Kemner, Ken; Kelly, Shelley

    2005-03-01

    Surfactant templated synthesis of mesoporous ceramics provides a versatile foundation upon which to create high efficiency environmental sorbents. These nanoporous ceramic oxides condense a huge amount of surface area into a very small volume. The ceramic oxide interface is receptive to surface functionalization through molecular self-assembly. The marriage of mesoporous ceramics with self-assembled monolayer chemistry creates a powerful new class of environmental sorbent materials called self-assembled monolayers on mesoporous supports (SAMMS). These SAMMS materials are highly efficient sorbents whose interfacial chemistry can be fine-tuned to selectively sequester a specific target species, such as heavy metals, tetrahedral oxometalate anions, and radionuclides. Details addressing the design, synthesis, and characterization of SAMMS materials specifically designed to sequester actinides, of central importance to the environmental cleanup necessary after 40 years of weapons-grade plutonium production, as well as evaluation of their binding affinities and kinetics are presented. PMID:15787373

  20. Mesoporous materials for energy conversion and storage devices

    NASA Astrophysics Data System (ADS)

    Li, Wei; Liu, Jun; Zhao, Dongyuan

    2016-06-01

    To meet the growing energy demands in a low-carbon economy, the development of new materials that improve the efficiency of energy conversion and storage systems is essential. Mesoporous materials offer opportunities in energy conversion and storage applications owing to their extraordinarily high surface areas and large pore volumes. These properties may improve the performance of materials in terms of energy and power density, lifetime and stability. In this Review, we summarize the primary methods for preparing mesoporous materials and discuss their applications as electrodes and/or catalysts in solar cells, solar fuel production, rechargeable batteries, supercapacitors and fuel cells. Finally, we outline the research and development challenges of mesoporous materials that need to be overcome to increase their contribution in renewable energy applications.

  1. Selective SERS Sensing Modulated by Functionalized Mesoporous Films.

    PubMed

    López-Puente, Vanesa; Angelomé, Paula C; Soler-Illia, Galo J A A; Liz-Marzán, Luis M

    2015-11-25

    A hybrid material comprising metal nanoparticles embedded in functionalized mesoporous thin films was constructed, and its use as a selective SERS-based sensor was demonstrated. The presence of specific functional groups in the pore network allows control over the surface chemistry of the pores, tuning the selectivity for specific molecules. Amino-functionalized hybrid mesoporous thin films were used in a proof of concept experiment, to discern the presence of methylene blue (MB) in mixtures with acid blue (AB), with no need for any sample pretreatment step. Selective detection of MB was possible through entrapment of AB in the mesoporous matrix, based on its high affinity for amino groups. The sensor selectivity can be tuned by varying the solution pH, rendering a pH responsive surface and thus, selective SERS-based sensing. The developed sensors allow specific detection of molecules in complex matrixes. PMID:26536368

  2. Plutonium complexation by phosphonate-functionalized mesoporous silica

    SciTech Connect

    Parsons-Moss, T; Schwaiger, L K; Hubaud, A; Hu, Y J; Tuysuz, H; Yang, P; Balasubramanian, K; Nitsche, H

    2010-10-27

    MCM-41-type mesoporous silica functionalized with the CMPO-based 'Ac-Phos' silane has been reported in the literature (1) to show good capacity as an acftinide sorbent material, with potential applications in environmental sequestration, aqueous waste separation and/or vitrification, and chemical sensing of actinides in solution. The study explores the complexation of Pu(IV and VI) and other selected actinides and lanthanides by SBA-15 type mesoporous silica functionalized with Ac-Phos. The Pu binding kinetics and binding capacity were determined for both the Ac-Phos functionalized and unmodified SBA-15. They analyzed the binding geometry and redox behavior of Pu(VI) by X-ray absorption spectroscopy (XAS). They discuss the synthesis and characterization of the functionalized mesoporous material, batch sorption experiments, and the detailed analyses of the actinide complexes that are formed. Structural measurements are paired with high-level quantum mechanical modeling to elucidate the binding mechanisms.

  3. Adsorption of vitamin E on mesoporous titania nanocrystals

    SciTech Connect

    Shih, C.J.; Lin, C.T.; Wu, S.M.

    2010-07-15

    Tri-block nonionic surfactant and titanium chloride were used as starting materials for the synthesis of mesoporous titania nanocrystallite powders. The main objective of the present study was to examine the synthesis of mesoporous titania nanocrystals and the adsorption of vitamin E on those nanocrystals using X-ray diffraction (XRD), transmission electron microscopy, and nitrogen adsorption and desorption isotherms. When the calcination temperature was increased to 300 {sup o}C, the reflection peaks in the XRD pattern indicated the presence of an anatase phase. The crystallinity of the nanocrystallites increased from 80% to 98.6% with increasing calcination temperature from 465 {sup o}C to 500 {sup o}C. The N{sub 2} adsorption data and XRD data taken after vitamin E adsorption revealed that the vitamin E molecules were adsorbed in the mesopores of the titania nanocrystals.

  4. Actinide Sequestration Using Self-Assembled Monolayers on Mesoporous Supports

    SciTech Connect

    Fryxell, Glen E.; Lin, Yuehe; Fiskum, Sandra K.; Birnbaum, Jerome C.; Wu, Hong; Kemner, K. M.; Kelly, Shelley

    2005-03-01

    Surfactant templated synthesis of mesoporous ceramics provides a versatile foundation upon which to create high efficiency environmental sorbents. These nanoporous ceramic oxides condense a huge amount of surface area into a very small volume. The ceramic oxide interface is receptive to surface functionalization through molecular self-assembly. The marriage of mesoporous ceramics with self-assembled monolayer chemistry creates a powerful new class of environmental sorbent materials called self-assembled monolayers on mesoporous supports (SAMMS). These SAMMS materials are highly efficient sorbents, whose interfacial chemistry can be fine-tuned to selectively sequester a specific target species, such as heavy metals, tetrahedral oxometallate anions and radionuclides. Details addressing the design, synthesis and characterization of SAMMS materials specifically designed to sequester actinides, of central importance to the environmental clean-up necessary after 40 years of weapons grade plutonium production, as well as evaluation of their binding affinities and kinetics are presented.

  5. Mesoporous materials for clean energy technologies.

    PubMed

    Linares, Noemi; Silvestre-Albero, Ana M; Serrano, Elena; Silvestre-Albero, Joaquín; García-Martínez, Javier

    2014-11-21

    Alternative energy technologies are greatly hindered by significant limitations in materials science. From low activity to poor stability, and from mineral scarcity to high cost, the current materials are not able to cope with the significant challenges of clean energy technologies. However, recent advances in the preparation of nanomaterials, porous solids, and nanostructured solids are providing hope in the race for a better, cleaner energy production. The present contribution critically reviews the development and role of mesoporosity in a wide range of technologies, as this provides for critical improvements in accessibility, the dispersion of the active phase and a higher surface area. Relevant examples of the development of mesoporosity by a wide range of techniques are provided, including the preparation of hierarchical structures with pore systems in different scale ranges. Mesoporosity plays a significant role in catalysis, especially in the most challenging processes where bulky molecules, like those obtained from biomass or highly unreactive species, such as CO2 should be transformed into most valuable products. Furthermore, mesoporous materials also play a significant role as electrodes in fuel and solar cells and in thermoelectric devices, technologies which are benefiting from improved accessibility and a better dispersion of materials with controlled porosity. PMID:24699503

  6. Zirconia-silica based mesoporous desulfurization adsorbents

    NASA Astrophysics Data System (ADS)

    Palomino, Jessica M.; Tran, Dat T.; Kareh, Ana R.; Miller, Christopher A.; Gardner, Joshua M. V.; Dong, Hong; Oliver, Scott R. J.

    2015-03-01

    We report a series of mesoporous silicate sorbent materials templated by long-chain primary alkylamines that display record level of desulfurization of the jet fuel JP-8. Pure silica frameworks and those with a Si:Zr synthesis molar ratio ranging from 44:1 to 11:1 were investigated. The optimum sorbent was identified as dodecylamine-templated silica-zirconia synthesized from a gel with Si:Zr molar ratio of 15:1. With an optimized silver loading of 11 wt.%, a saturation adsorption capacity of 39.4 mgS g-1 and a silver efficiency of 1.21 molS mol Ag-1 were observed for JP-8. This sorbent displayed exceptional regenerability, maintaining 86% of its initial capacity in model fuel after solvent regeneration with diethyl ether. Low-cost, portable and reusable sorbents for the desulfurization of JP-8 jet fuel are needed to make solid oxide fuel cells (SOFCs) a reality for military power needs. SOFCs require ultra-low sulfur content fuel, which traditional desulfurization methods cannot achieve.

  7. Enzyme-Powered Hollow Mesoporous Janus Nanomotors.

    PubMed

    Ma, Xing; Jannasch, Anita; Albrecht, Urban-Raphael; Hahn, Kersten; Miguel-López, Albert; Schäffer, Erik; Sánchez, Samuel

    2015-10-14

    The development of synthetic nanomotors for technological applications in particular for life science and nanomedicine is a key focus of current basic research. However, it has been challenging to make active nanosystems based on biocompatible materials consuming nontoxic fuels for providing self-propulsion. Here, we fabricate self-propelled Janus nanomotors based on hollow mesoporous silica nanoparticles (HMSNPs), which are powered by biocatalytic reactions of three different enzymes: catalase, urease, and glucose oxidase (GOx). The active motion is characterized by a mean-square displacement (MSD) analysis of optical video recordings and confirmed by dynamic light scattering (DLS) measurements. We found that the apparent diffusion coefficient was enhanced by up to 83%. In addition, using optical tweezers, we directly measured a holding force of 64 ± 16 fN, which was necessary to counteract the effective self-propulsion force generated by a single nanomotor. The successful demonstration of biocompatible enzyme-powered active nanomotors using biologically benign fuels has a great potential for future biomedical applications. PMID:26437378

  8. Brick-and-Mortar Self-Assembly Approach to Graphitic Mesoporous Carbon Nanocomposites

    SciTech Connect

    Dai, Sheng; Fulvio, Pasquale F; Mayes, Richard T; Wang, Xiqing; Mahurin, Shannon Mark; Bauer, Christopher; Presser, Volker; Mcdonough, John; Gogotsi, Yury

    2011-01-01

    Mesoporous carbon materials do not have sufficient ordering at the atomic scale to exhibit good electronic conductivity. To date, mesoporous carbons having uniform mesopores and high surface areas have been prepared from partially-graphitizable precursors in the presence of templates. High temperature thermal treatments above 2000 C, which are usually required to increase conductivity, result in a partial or total collapse of the mesoporous structures and reduced surface areas induced by growth of graphitic domains, limiting their applications in electric double layer capacitors and lithium-ion batteries. In this work, we successfully implemented a 'brick-and-mortar' approach to obtain ordered graphitic mesoporous carbon nanocomposites with tunable mesopore sizes below 850 C without using graphitization catalysts or high temperature thermal treatments. Phenolic resin-based mesoporous carbons act as mortar to highly conductive carbon blacks and carbon onions (bricks). The capacitance and resistivity of final materials can be tailored by changing the mortar to brick ratios.

  9. Lower Permittivity Characteristic of Mesoporous-Alumina/Epoxy Composite due to Particle Porosity

    NASA Astrophysics Data System (ADS)

    Kurimoto, Muneaki; Murakami, Yoshinobu; Nagao, Masayuki

    Introduction of metal oxide nanoparticles to polymer composite material is known to have unique dielectric behavior and significant advantage in the electrical insulation performance of electrical power apparatus. This paper presents an attempt to derive the dielectric characteristics of polymer composite filled with the metal oxide particle which has mesoporous structure. Experiments were carried out in the epoxy composites filled with alumina microparticles which have the mesoporous structure (mesoporous-alumina/epoxy composites) with different particle content. Based on the measurement of the specific gravity of mesoporous-alumina/epoxy composites, the porosity of mesoporous-alumina particle in the epoxy matrix was found to be higher than that of nonporous-alumina particle. Furthermore, we evaluated relative permittivity of mesoporous-alumina/epoxy composites by measuring the capacitance of its specimens. As the results, we verified that the permittivity of mesoporous-alumina/epoxy composites was lower than that of nonporous-alumina/epoxy composites due to the particle porosity.

  10. The synthesis and application of two mesoporous silica nanoparticles as drug delivery system with different shape

    NASA Astrophysics Data System (ADS)

    Wang, Jiayi; Wang, Zhuyuan; Chen, Hui; Zong, Shenfei; Cui, Yiping

    2015-05-01

    Mesoporous silica nanospheres(MSNSs) have been obtained utilizing the conventional reverse micelles synthesis method while the mesoporous silica nanorods(MSNRs) have been acquired by means of changing certain parameters. Afterwards, the prepared mesoporous silica nanospheres and nanorods were used as drug carriers to load and release the classical cancer therapeutic drug—DOX. According to the absorption spectra, the encapsulation efficiency of the mesoporous silica nanospheres is almost as high as that of the nanospheres. Different from the familiar encapsulation efficiency, the release characteristic curves of the mesoporous silica nanospheres and nanorods possessed certain differences during the release process. Finally incellular fluorescence imaging was achieved to observe the endocytosis of the mesoporous silica materials. Our results show that although both of the two kinds of nanoparticles possess favourable properties for loading and releasing drugs, the mesoporous silica nanospheres perform better in dispersity and controlled release than the nanorods, which probably endow them the potential as incellular drug delivery system.

  11. Improvement of the Water Resistance of a Narrow-Band Red-Emitting SrLiAl3 N4 :Eu(2+) Phosphor Synthesized under High Isostatic Pressure through Coating with an Organosilica Layer.

    PubMed

    Tsai, Yi-Ting; Nguyen, Hoang-Duy; Lazarowska, Agata; Mahlik, Sebastian; Grinberg, Marek; Liu, Ru-Shi

    2016-08-01

    A SrLiAl3 N4 :Eu(2+) (SLA) red phosphor prepared through a high-pressure solid-state reaction was coated with an organosilica layer with a thickness of 400-600 nm to improve its water resistance. The observed 4f(6) 5d→4f(7) transition bands are thought to result from the existence of Eu(2+) at two different Sr(2+) sites. Luminescence spectra at 10 K revealed two zero-phonon lines at 15377 (for Eu(Sr1)) and 15780 cm(-1) (for Eu(Sr2)). The phosphor exhibited stable red emission under high pressure up to 312 kbar. The configurational coordinate diagram gave a theoretical explanation for the Eu(2+/3+) result. The coated samples showed excellent moisture resistance while retaining an external quantum efficiency (EQE) of 70 % of their initial EQE after aging for 5 days under harsh conditions. White-light-emitting diodes of the SLA red phosphor and a commercial Y3 Al5 O12 :Ce(3+) yellow phosphor on a blue InGaN chip showed high color rendition (CRI=89, R9=69) and a low correlated color temperature of 2406 K. PMID:27377167

  12. Optical and electronic loss analysis of mesoporous solar cells

    NASA Astrophysics Data System (ADS)

    Kovalsky, Anton; Burda, Clemens

    2016-07-01

    We review the art of complete optical and electronic characterization of the popular mesoporous solar cell motif. An overview is given of how the mesoporous paradigm is applied to solar cell technology, followed by a discussion on the variety of techniques available for thoroughly probing efficiency leaching mechanisms at every stage of the energy transfer pathway. Some attention is dedicated to the rising importance of computational results to augment loss analysis due to the complexity of solar cell devices, which have emergent properties that are important to account for, but difficult to measure, such as parasitic absorption.

  13. Container effect in nanocasting synthesis of mesoporous metal oxides.

    PubMed

    Sun, Xiaohong; Shi, Yifeng; Zhang, Peng; Zheng, Chunming; Zheng, Xinyue; Zhang, Fan; Zhang, Yichi; Guan, Naijia; Zhao, Dongyuan; Stucky, Galen D

    2011-09-21

    We report a general reaction container effect in the nanocasting synthesis of mesoporous metal oxides. The size and shape of the container body in conjunction with simply modifying the container opening accessibility can be used to control the escape rate of water and other gas-phase byproducts in the calcination process, and subsequently affect the nanocrystal growth of the materials inside the mesopore space of the template. In this way, the particle size, mesostructure ordering, and crystallinity of the final product can be systemically controlled. The container effect also explain some of the problems with reproducibility in previously reported results. PMID:21861449

  14. Hypercrosslinked Phenolic Polymers with Well Developed Mesoporous Frameworks

    SciTech Connect

    Mahurin, Shannon Mark; Dai, Sheng

    2015-01-01

    A soft chemistry synthetic strategy based on a Friedel Crafts alkylation reaction is developed for the textural engineering of phenolic resin (PR) with a robust mesoporous framework to avoid serious framework shrinkage and maximize retention of organic functional moieties. By taking advantage of the structural benefits of molecular bridges, the resultant sample maintains a bimodal micro-mesoporous architecture with well-preserved organic functional groups, which is effective for carbon capture. Moreover, this soft chemistry synthetic protocol can be further extended to nanotexture other aromatic-based polymers with robust frameworks.

  15. Monolithic Gyroidal Mesoporous Mixed Titanium–Niobium Nitrides

    PubMed Central

    2015-01-01

    Mesoporous transition metal nitrides are interesting materials for energy conversion and storage applications due to their conductivity and durability. We present ordered mixed titanium–niobium (8:2, 1:1) nitrides with gyroidal network structures synthesized from triblock terpolymer structure-directed mixed oxides. The materials retain both macroscopic integrity and mesoscale ordering despite heat treatment up to 600 °C, without a rigid carbon framework as a support. Furthermore, the gyroidal lattice parameters were varied by changing polymer molar mass. This synthesis strategy may prove useful in generating a variety of monolithic ordered mesoporous mixed oxides and nitrides for electrode and catalyst materials. PMID:25122534

  16. Hypercrosslinked phenolic polymers with well developed mesoporous frameworks

    DOE PAGESBeta

    Zhang, Jinshui; Qiao, Zhenan -An; Mahurin, Shannon Mark; Jiang, Xueguang; Chai, Song -Hai; Lu, Hanfeng; Nelson, Kimberly M.; Dai, Sheng

    2015-02-12

    A soft chemistry synthetic strategy based on a Friedel Crafts alkylation reaction is developed for the textural engineering of phenolic resin (PR) with a robust mesoporous framework to avoid serious framework shrinkage and maximize retention of organic functional moieties. By taking advantage of the structural benefits of molecular bridges, the resultant sample maintains a bimodal micro-mesoporous architecture with well-preserved organic functional groups, which is effective for carbon capture. Furthermore, this soft chemistry synthetic protocol can be further extended to nanotexture other aromatic-based polymers with robust frameworks.

  17. Phase State and Dynamics of Fluids in Mesoporous Solids

    NASA Astrophysics Data System (ADS)

    Valiullin, Rustem

    2011-03-01

    Fundamental understanding of the correlations between the phase state and dynamics of fluids confined to mesoporous solids is an important prerequisite for their optimal use in practical applications. The present contribution describes some recent progress in the exploration of such interrelations using nuclear magnetic resonance. In particular, transport properties of fluids during gas-liquid, solid-liquid and liquid-liquid transitions occurring in pore spaces of mesoporous solids are discussed and are shown to bear strong correlations. From the results presented it will, in particular, become evident that molecular diffusivity is a sensitive microscopic parameter not only to the thermodynamic state of the system, but also the history of its preparation.

  18. Diffusion NMR of Fluids Confined to Mesopores under High Pressures

    NASA Astrophysics Data System (ADS)

    Zeigermann, Philipp; Dvoyashkin, Muslim; Gläser, Roger; Valiullin, Rustem

    2011-03-01

    Supercritical fluids are extensively used in various chemical applications including processes involving porous solids. The knowledge of their transport in bulk as well as under spatial confinements is critical for modeling and optimizing chemical reactions. In this contribution, we describe a high-pressure cell designed for pulsed field gradient NMR studies of diffusion of supercritical solvents in mesoporous materials. Some preliminary results on diffusion properties of ethane in bulk phase and confined to pores of mesoporous silicon obtained in a broad range of pressures below and above the critical temperature are reported.

  19. Container Effect in Nanocasting Synthesis of Mesoporous Metal Oxides

    SciTech Connect

    Sun, Xiaohong; Shi, Yifeng; Zhang, Peng; Zheng, Chunming; Zheng, Xinyue; Zhang, Fan; Zhang, Yichi; Guan, Naijia; Zhao, Dongyuan; Stucky, Galen D.

    2011-08-23

    We report a general reaction container effect in the nanocasting synthesis of mesoporous metal oxides. The size and shape of the container body in conjunction with simply modifying the container opening accessibility can be used to control the escape rate of water and other gas-phase byproducts in the calcination process, and subsequently affect the nanocrystal growth of the materials inside the mesopore space of the template. In this way, the particle size, mesostructure ordering, and crystallinity of the final product can be systemically controlled. The container effect also explain some of the problems with reproducibility in previously reported results.

  20. Periodized wavelets

    SciTech Connect

    Schlossnagle, G.; Restrepo, J.M.; Leaf, G.K.

    1993-12-01

    The properties of periodized Daubechies wavelets on [0,1] are detailed and contrasted against their counterparts which form a basis for L{sup 2}(R). Numerical examples illustrate the analytical estimates for convergence and demonstrate by comparison with Fourier spectral methods the superiority of wavelet projection methods for approximations. The analytical solution to inner products of periodized wavelets and their derivatives, which are known as connection coefficients, is presented, and several tabulated values are included.

  1. Adsorption of mycotoxins in beverages onto functionalized mesoporous silicas

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Mycotoxins, natural toxins produced by fungi, are a global concern as contaminates of agricultural commodities. Exposure to these toxins can be reduced by the use of binding materials. Templated mesoporous silicas are promising materials with favorable adsorptive properties for dyes, ions, and toxin...

  2. Contamination-resistant silica antireflective coating with closed ordered mesopores.

    PubMed

    Sun, Jinghua; Zhang, Qinghua; Ding, Ruimin; Lv, Haibing; Yan, Hongwei; Yuan, Xiaodong; Xu, Yao

    2014-08-21

    Porous silica optical antireflective (AR) coatings prepared by traditional sol-gel method have been extensively used for high power laser systems, but a serious drawback is that contamination existing in the high vacuum is easily absorbed by the disordered open pore structure, resulting in a fast decrease in transmittance. To improve the stability of transmittance in vacuum, a contamination-resistant silica AR coating with ordered mesopores completely closed by hydrophobic-oleophobic groups was successfully developed on a fused quartz substrate. The ordered mesopores in the coating were controlled under the direction of surfactant F127 via an evaporation-induced-self-assembling process and then were closed by post-grafting long chain fluoroalkylsilane. The grazing incidence small angle X-ray scattering (GISAXS) and the X-ray reflectivity (XRR) results indicated that the mesopores in the coating constructed a Fmmm orthorhombic symmetry structure with a (010) plane parallel to the substrate. Cage-like mesopores were confirmed by nitrogen adsorption-desorption analysis. The obtained coatings showed low surface roughness, excellent abrase-resistance and high transmittance of 100% on quartz substrate. Especially, the decrease of transmittance tested with polydimethylsiloxane pollution in vacuum within one-month was as small as 0.02%. The laser induced damage threshold was up to 59.8 J cm(-2) at a 12 ns laser pulse of 1053 nm wavelength. This work provides an alternative way to fabricate AR coatings with high stability. PMID:25000419

  3. Incorporation of anti-inflammatory agent into mesoporous silica.

    PubMed

    Braz, Wilson Rodrigues; Rocha, Natállia Lamec; de Faria, Emerson H; Silva, Márcio L A E; Ciuffi, Katia J; Tavares, Denise C; Furtado, Ricardo Andrade; Rocha, Lucas A; Nassar, Eduardo J

    2016-09-23

    The unique properties of macroporous, mesoporous, and microporous systems, including their ability to accommodate molecules of different sizes inside their pores and to act as drug delivery systems, have been the object of extensive studies. In this work, mesoporous silica with hexagonal structure was obtained by template synthesis via the sol-gel process. The resulting material was used as support to accommodate the anti-inflammatory agent indomethacin. The alkaline route was used to prepare the mesoporous silica; cetyltrimethylammonium bromide was employed as porogenic agent. The silica particles were functionalized with 3-aminopropyltriethoxysilane alkoxide (APTES) by the sol-gel post-synthesis method. Indomethacin was incorporated into the silica functionalized with APTES and into non-functionalized silica. The resulting systems were characterized by x-ray diffraction (XRD), specific area, infrared spectroscopy, and thermal analyses (TGA). XRD attested to formation of mesoporous silica with hexagonal structure. This structure remained after silica functionalization with APTES and incorporation of indomethacin. Typical infrared spectroscopy vibrations and organic material decomposition during TGA confirmed silica functionalization and drug incorporation. The specific surface area and pore volume of the functionalized material incorporated with indomethacin decreased as compared with the specific surface area and pore volume of the non-functionalized silica containing no drug, suggesting both the functionalizing agent and the drug were present in the silica. Cytotoxicity tests conducted on normal fibroblasts (GM0479A) cells attested that the silica matrix containing indomethacin was less toxic than the free drug. PMID:27533108

  4. Chemical vapor deposition of mesoporous graphene nanoballs for supercapacitor.

    PubMed

    Lee, Jung-Soo; Kim, Sun-I; Yoon, Jong-Chul; Jang, Ji-Hyun

    2013-07-23

    A mass-producible mesoporous graphene nanoball (MGB) was fabricated via a precursor-assisted chemical vapor deposition (CVD) technique for supercapacitor application. Polystyrene balls and reduced iron created under high temperature and a hydrogen gas environment provide a solid carbon source and a catalyst for graphene growth during the precursor-assisted CVD process, respectively. Carboxylic acid and sulfonic acid functionalization of the polystyrene ball facilitates homogeneous dispersion of the hydrophobic polymer template in the metal precursor solution, thus, resulting in a MGB with a uniform number of graphene layers. The MGB is shown to have a specific surface area of 508 m(2)/g and is mesoporous with a mean mesopore diameter of 4.27 nm. Mesopores are generated by the removal of agglomerated iron domains, permeating down through the soft polystyrene spheres and providing the surface for subsequent graphene growth during the heating process in a hydrogen environment. This technique requires only drop-casting of the precursor/polystyrene solution, allowing for mass-production of multilayer MGBs. The supercapacitor fabricated by the use of the MGB as an electrode demonstrates a specific capacitance of 206 F/g and more than 96% retention of capacitance after 10,000 cycles. The outstanding characteristics of the MGB as an electrode for supercapacitors verify the strong potential for use in energy-related areas. PMID:23782238

  5. Antibacterial performance of nanocrystallined titania confined in mesoporous silica nanotubes.

    PubMed

    Cendrowski, Krzysztof; Peruzynska, Magdalena; Markowska-Szczupak, Agata; Chen, Xuecheng; Wajda, Anna; Lapczuk, Joanna; Kurzawski, Mateusz; Kalenczuk, Ryszard J; Drozdzik, Marek; Mijowska, Ewa

    2014-06-01

    In this paper, we study synthesis and characteristics of mesoporous silica nanotubes modified by titanium dioxide, as well as their antimicrobial properties and influence on mitochondrial activity of mouse fibroblast L929. Nanocrystalized titania is confined in mesopores of silica nanotubes and its light activated antibacterial response is revealed. The analysis of the antibacterial effect on Escherichia coli. (ATCC 25922) shows strong enhancement during irradiation with the artificial visible and ultraviolet light in respect to the commercial catalyst and control sample free from the nanomaterials. In darkness, the mesoporous silica/titania nanostructures exhibited antibacterial activity dependent on the stirring speed of the suspension containing nanomaterials. Obtained micrograph proved internalization of the sample into the microorganism trough the cell membrane. The analysis of the mitochondrial activity and amount of lactate dehydrogenase released from mouse fibroblast cells L929 in the presence of the sample were determined with LDH and WST1 assays, respectively. The synthesized silica/titania antibacterial agent also exhibits pronounced photoinduced inactivation of the bacterial growth under the artificial visible and UV light irritation in respect to the commercial catalyst. Additionally, mesoporous silica/titania nanotubes were characterized in details by means of high resolution transmission electron microscopy (HR-TEM), XRD and BET Isotherm. PMID:24676537

  6. Solution Plasma Process for Template Removal in Mesoporous Silica Synthesis

    NASA Astrophysics Data System (ADS)

    Pootawang, Panuphong; Saito, Nagahiro; Takai, Osamu

    2010-12-01

    The plasma discharge in aqueous solution was scientifically studied and applied to template removal in mesoporous silica synthesis. Highly dispersed spherical mesoporous silica particles were synthesized by the ternary surfactant system containing the Pluronic P123 copolymer (EO20PO69EO20), sodium dodecylbenzene sulfonate, and 1,1,2,2,3,3,4,4,4-nonafluoro-1-butane sulfonate, via the sol-gel method in acid solutions. The solution plasma process (SPP), instead of conventional thermal calcinations, was used to remove the template. The mechanism of the removal of the organic template occurred via oxidation by the hydroxyl radicals generated during discharge. The transformation of a mesopore structure from a disordered wormlike structure to a hexagonally arranged structure was observed by X-ray diffraction analysis and was confirmed by transmission electron microscopy. The results of the thermal analysis and functional group identification of mesoporous silica after SPP showed evidence of organic template removal. The surface area calculated using the Brunauer-Emmett-Teller (BET) theory and the mean pore diameter results could be used to evaluate the plasma efficiency, demonstrating that this method does not affect the pore size in the case of discharge in a solution of pH 3 compared with the results of thermal calcination. Hence, SPP was proved to be highly efficient for organic template removal, exhibiting short consumption time and less contamination.

  7. Bifunctional mesoporous silicas with clearly distinguished localization of grafted groups

    NASA Astrophysics Data System (ADS)

    Roik, N. V.; Belyakova, L. A.

    2013-12-01

    Bifunctional mesoporous silicas with clearly distinguished localization of grafted groups on the surface of particles and inside their pores were obtained by means of sol-gel synthesis with postsynthetic vapor-phase treatment in vacuum. It was found that the synthesized materials have the hexagonally ordered porous structure typical of MCM-41 type silica.

  8. Ordered mesoporous carbon catalyst for dehydrogenation of propane to propylene.

    PubMed

    Liu, Lei; Deng, Qing-Fang; Agula, Bao; Zhao, Xu; Ren, Tie-Zhen; Yuan, Zhong-Yong

    2011-08-01

    Metal-free ordered mesoporous carbons were demonstrated to be robust catalysts for direct dehydrogenation of propane to propylene, in the absence of any auxiliary steam, exhibiting high activity and selectivity, as well as long catalytic stability, in comparison with nanostructured carbons. PMID:21687889

  9. Rapid synthesis of ordered hexagonal mesoporous silica and their incorporation with Ag nanoparticles by solution plasma

    SciTech Connect

    Pootawang, Panuphong; Saito, Nagahiro; Takai, Osamu; Lee, Sang Yul

    2012-10-15

    Graphical abstract: Overall reactions of mesoporous silica and AgNPs-incorporated mesoporous silica syntheses by solution plasma process (SPP). Highlights: ► SPP for rapid synthesis of mesoporous silica. ► SPP for rapid synthesis of mesoporous silica and AgNPs incorporation. ► Higher surface area and larger pore diameter of mesoporous silica synthesized by SPP. -- Abstract: Rapid synthesis of silica with ordered hexagonal mesopore arrangement was obtained using solution plasma process (SPP) by discharging the mixture of P123 triblock copolymer/TEOS in acid solution. SPP, moreover, was utilized for Ag nanoparticles (AgNPs) incorporation in silica framework as one-batch process using silver nitrate (AgNO{sub 3}) solution as precursor. The turbid silicate gel was clearly observed after discharge for 1 min and the white precipitate formed at 3 min. The mesopore with hexagonal arrangement and AgNPs were observed in mesoporous silica. Two regions of X-ray diffraction patterns (2θ < 2° and 2θ = 35–90°) corresponded to the mesoporous silica and Ag nanocrystal characteristics. Comparing with mesoporous silica prepared by a conventional sol–gel route, surface area and pore diameter of mesoporous silica prepared by solution plasma were observed to be larger. In addition, the increase in Ag loading resulted in the decrease in surface area with insignificant variation in the pore diameter of mesoporous silica. SPP could be successfully utilized not only to enhance gelation time but also to increase surface area and pore diameter of mesoporous silica.

  10. A magnetic mesoporous silica nanoparticle-based drug delivery system for photosensitive cooperative treatment of cancer with a mesopore-capping agent and mesopore-loaded drug

    NASA Astrophysics Data System (ADS)

    Knežević, Nikola Ž.; Lin, Victor S.-Y.

    2013-01-01

    Lately, there has been a growing interest in anticancer therapy with a combination of different drugs that work by different mechanisms of action, which decreases the possibility that resistant cancer cells will develop. Herein we report on the development of a drug delivery system for photosensitive delivery of a known anticancer drug camptothecin along with cytotoxic cadmium sulfide nanoparticles from a magnetic drug nanocarrier. Core-shell nanoparticles consisting of magnetic iron-oxide-cores and mesoporous silica shells are synthesized with a high surface area (859 m2 g-1) and hexagonal packing of mesopores, which are 2.6 nm in diameter. The mesopores are loaded with anticancer drug camptothecin while entrances of the mesopores are blocked with 2-nitro-5-mercaptobenzyl alcohol functionalized CdS nanoparticles through a photocleavable carbamate linkage. Camptothecin release from this magnetic drug delivery system is successfully triggered upon irradiation with UV light, as measured by fluorescence spectroscopy. Photosensitive anticancer activity of the drug delivery system is monitored by viability studies on Chinese hamster ovarian cells. The treatment of cancer cells with drug loaded magnetic material leads to a decrease in viability of the cells due to the activity of capping CdS nanoparticles. Upon exposure to low power UV light (365 nm) the loaded camptothecin is released which induces additional decrease in viability of CHO cells. Hence, the capping CdS nanoparticles and loaded camptothecin exert a cooperative anticancer activity. Responsiveness to light irradiation and magnetic activity of the nanocarrier enable its potential application for selective targeted treatment of cancer.

  11. Synthesis of mesoporous zeolite single crystals with cheap porogens

    SciTech Connect

    Tao Haixiang; Li Changlin; Ren Jiawen; Wang Yanqin; Lu Guanzhong

    2011-07-15

    Mesoporous zeolite (silicalite-1, ZSM-5, TS-1) single crystals have been successfully synthesized by adding soluble starch or sodium carboxymethyl cellulose (CMC) to a conventional zeolite synthesis system. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption analysis, {sup 27}Al magic angle spinning nuclear magnetic resonance ({sup 27}Al MAS NMR), temperature-programmed desorption of ammonia (NH{sub 3}-TPD) and ultraviolet-visible spectroscopy (UV-vis). The SEM images clearly show that all zeolite crystals possess the similar morphology with particle size of about 300 nm, the TEM images reveal that irregular intracrystal pores are randomly distributed in the whole crystal. {sup 27}Al MAS NMR spectra indicate that nearly all of the Al atoms are in tetrahedral co-ordination in ZSM-5, UV-vis spectra confirm that nearly all of titanium atoms are incorporated into the framework of TS-1. The catalytic activity of meso-ZSM-5 in acetalization of cyclohexanone and meso-TS-1 in hydroxylation of phenol was also studied. The synthesis method reported in this paper is cost-effective and environmental friendly, can be easily expended to prepare other hierarchical structured zeolites. - Graphical abstract: Mesoporous zeolite single crystals were synthesized by using cheap porogens as template. Highlights: > Mesoporous zeolite (silicalite-1, ZSM-5, TS-1) single crystals were synthesized. > Soluble starch or sodium carboxymethyl cellulose (CMC) was used as porogens. > The mesoporous zeolites had connected mesopores although closed pores existed. > Higher catalytic activities were obtained.

  12. Mesoporous-silica films, fibers, and powders by evaporation

    DOEpatents

    Bruinsma, Paul J.; Baskaran, Suresh; Bontha, Jagannadha R.; Liu, Jun

    2008-05-06

    This invention pertains to surfactant-templated nanometer-scale porosity of a silica precursor solution and forming a mesoporous material by first forming the silica precursor solution into a preform having a high surface area to volume ratio, then rapid drying or evaporating a solvent from the silica precursor solution. The mesoporous material may be in any geometric form, but is preferably in the form of a film, fiber, powder or combinations thereof. The rapid drying or evaporation of solvent from the solution is accomplished by layer thinning, for example spin casting, liquid drawing, and liquid spraying respectively. Production of a film is by layer thinning, wherein a layer of the silica precursor solution is formed on a surface followed by removal of an amount of the silica precursor solution and leaving a geometrically thinner layer of the silica precursor solution from which the solvent quickly escapes via evaporation. Layer thinning may be by any method including but not limited to squeegeeing and/or spin casting. In powder formation by spray drying, the same conditions of fast drying exists as in spin-casting (as well as in fiber spinning) because of the high surface-area to volume ratio of the product. When a powder is produced by liquid spraying, the particles or micro-bubbles within the powder are hollow spheres with walls composed of mesoporous silica. Mesoporous fiber formation starts with a similar silica precursor solution but with an added pre-polymer making a pituitous mixture that is drawn into a thin strand from which solvent is evaporated leaving the mesoporous fiber(s).

  13. Mesoporous-silica films, fibers, and powders by evaporation

    DOEpatents

    Bruinsma, Paul J.; Baskaran, Suresh; Bontha, Jagannadha R.; Liu, Jun

    1999-01-01

    This invention pertains to surfactant-templated nanometer-scale porosity of a silica precursor solution and forming a mesoporous material by first forming the silica precursor solution into a preform having a high surface area to volume ratio, then rapid drying or evaporating a solvent from the silica precursor solution. The mesoporous material may be in any geometric form, but is preferably in the form of a film, fiber, powder or combinations thereof. The rapid drying or evaporation of solvent from the solution is accomplished by layer thinning, for example spin casting, liquid drawing, and liquid spraying respectively. Production of a film is by layer thinning, wherein a layer of the silica precursor solution is formed on a surface followed by removal of an amount of the silica precursor solution and leaving a geometrically thinner layer of the silica precursor solution from which the solvent quickly escapes via evaporation. Layer thinning may be by any method including but not limited to squeegeeing and/or spin casting. In powder formation by spray drying, the same conditions of fast drying exists as in spin-casting (as well as in fiber spinning) because of the high surface-area to volume ratio of the product. When a powder is produced by liquid spraying, the particles or micro-bubbles within the powder are hollow spheres with walls composed of mesoporous silica. Mesoporous fiber formation starts with a similar silica precursor solution but with an added pre-polymer making a pituitous mixture that is drawn into a thin strand from which solvent is evaporated leaving the mesoporous fiber(s).

  14. Mesoporous-silica films, fibers, and powders by evaporation

    DOEpatents

    Bruinsma, P.J.; Baskaran, S.; Bontha, J.R.; Liu, J.

    1999-07-13

    This invention pertains to surfactant-templated nanometer-scale porosity of a silica precursor solution and forming a mesoporous material by first forming the silica precursor solution into a preform having a high surface area to volume ratio, then rapid drying or evaporating a solvent from the silica precursor solution. The mesoporous material may be in any geometric form, but is preferably in the form of a film, fiber, powder or combinations thereof. The rapid drying or evaporation of solvent from the solution is accomplished by layer thinning, for example spin casting, liquid drawing, and liquid spraying respectively. Production of a film is by layer thinning, wherein a layer of the silica precursor solution is formed on a surface followed by removal of an amount of the silica precursor solution and leaving a geometrically thinner layer of the silica precursor solution from which the solvent quickly escapes via evaporation. Layer thinning may be by any method including but not limited to squeegeeing and/or spin casting. In powder formation by spray drying, the same conditions of fast drying exists as in spin-casting (as well as in fiber spinning) because of the high surface-area to volume ratio of the product. When a powder is produced by liquid spraying, the particles or micro-bubbles within the powder are hollow spheres with walls composed of mesoporous silica. Mesoporous fiber formation starts with a similar silica precursor solution but with an added pre-polymer making a pituitous mixture that is drawn into a thin strand from which solvent is evaporated leaving the mesoporous fiber(s). 24 figs.

  15. Magnetic mesoporous materials for removal of environmental wastes

    SciTech Connect

    Kim, Byoung Chan; Lee, Jinwoo; Um, Wooyong; Kim, Jaeyun; Joo, Jin; Lee, Jin Hyung; Kwak, Ja Hun; Kim, Jae Hyun; Lee, Changha; Lee, Hongshin; Addleman, Raymond S.; Hyeon, Taeghwan; Gu, Man Bock; Kim, Jungbae

    2011-09-15

    We have synthesized two different magnetic mesoporous materials that can be easily separated from aqueous solutions by applying a magnetic field. Synthesized magnetic mesoporous materials, Mag-SBA-15 (magnetic ordered mesoporous silica) and Mag-OMC (magnetic ordered mesoporous carbon), have a high loading capacity of contaminants due to high surface area of the supports and high magnetic activity due to the embedded iron oxide particles. Application of surface-modified Mag-SBA-15 was investigated for the collection of mercury from water. The mercury adsorption using Mag-SBA-15 was rapid during the initial contact time and reached a steady-state condition, with an uptake of approximately 97% after 7 hours. Application of Mag-OMC for collection of organics from water, using fluorescein as an easily trackable model analyte, was explored. The fluorescein was absorbed into Mag-OMC within minutes and the fluorescent intensity of solution was completely disappeared after an hour. In another application, Mag-SBA-15 was used as a host of tyrosinase, and employed as recyclable catalytic scaffolds for tyrosinase-catalyzed biodegradation of catechol. Tyrosinase aggregates in Mag-SBA-15, prepared in a two step process of tyrosinase adsorption and crosslinking, could be used repeatedly for catechol degradation with no serious loss of enzyme activity. Considering these results of cleaning up water from toxic inorganic, organic and biochemical contaminants, magnetic mesoporous materials have a great potential to be employed for the removal of environmental contaminants and potentially for the application in large-scale wastewater treatment plants.

  16. Multifunctional mesoporous silica nanocomposite nanoparticles for theranostic applications.

    PubMed

    Lee, Ji Eun; Lee, Nohyun; Kim, Taeho; Kim, Jaeyun; Hyeon, Taeghwan

    2011-10-18

    Clever combinations of different types of functional nanostructured materials will enable the development of multifunctional nanomedical platforms for multimodal imaging or simultaneous diagnosis and therapy. Mesoporous silica nanoparticles (MSNs) possess unique structural features such as their large surface areas, tunable nanometer-scale pore sizes, and well-defined surface properties. Therefore, they are ideal platforms for constructing multifunctional materials that incorporate a variety of functional nanostructured materials. In this Account, we discuss recent progress by our group and other researchers in the design and fabrication of multifunctional nanocomposite nanoparticles based on mesoporous silica nanostructures for applications to simultaneous diagnosis and therapy. Versatile mesoporous silica-based nanocomposite nanoparticles were fabricated using various methods. Here, we highlight two synthetic approaches: the encapsulation of functional nanoparticles within a mesoporous silica shell and the assembly of nanoparticles on the surface of silica nanostructures. Various nanoparticles were encapsulated in MSNs using surfactants as both phase transfer agents and pore-generating templates. Using MSNs as a scaffold, functional components such as magnetic nanoparticles and fluorescent dyes have been integrated within these systems to generate multifunctional nanocomposite systems that maintain their individual functional characteristics. For example, uniform mesoporous dye-doped silica nanoparticles immobilized with multiple magnetite nanocrystals on their surfaces have been fabricated for their use as a vehicle capable of simultaneous magnetic resonance (MR) and fluorescence imaging and drug delivery. The resulting nanoparticle-incorporated MSNs were then tested in mice with tumors. These in vivo experiments revealed that these multifunctional nanocomposite nanoparticles were delivered to the tumor sites via passive targeting. These nanocomposite

  17. A doxorubicin delivery system: Samarium/mesoporous bioactive glass/alginate composite microspheres.

    PubMed

    Zhang, Ying; Wang, Xiang; Su, Yanli; Chen, Dongya; Zhong, Wenxing

    2016-10-01

    Samarium (Sm) incorporated mesoporous bioactive glasses (MBG) microspheres have been prepared using the method of alginate cross-linking with Ca(2+) ions. The in vitro bioactivities of Sm/MBG/alginate microspheres were studied by immersing in simulated body fluid (SBF) for various periods. The results indicated that the Sm/MBG/alginate microspheres have a faster apatite formation rate on the surface. To investigate their delivery properties further, doxorubicin (DOX) was selected as a model drug. The results showed that the Sm/MBG/alginate microspheres exhibit sustained DOX delivery, and their release mechanism is controlled by Fickian diffusion according the Higuchi model. In addition, the delivery of DOX from Sm/MBG/alginate microspheres can be dominated by changing the doping concentration of Sm and the values of pH microenvironment. These all revealed that this material is a promising candidate for the therapy of bone cancer. PMID:27287115

  18. Mesoporous magnetic secondary nanostructures as versatile adsorbent for efficient scavenging of heavy metals

    PubMed Central

    Bhattacharya, Kakoli; Parasar, Devaborniny; Mondal, Bholanath; Deb, Pritam

    2015-01-01

    Porous magnetic secondary nanostructures exhibit high surface area because of the presence of plentiful interparticle spaces or pores. Mesoporous Fe3O4 secondary nanostructures (MFSNs) have been studied here as versatile adsorbent for heavy metal scavenging. The porosity combined with magnetic functionality of the secondary nanostructures has facilitated efficient heavy metal (As, Cu and Cd) remediation from water solution within a short period of contact time. It is because of the larger surface area of MFSNs due to the porous network in addition to primary nanostructures which provides abundant adsorption sites facilitating high adsorption of the heavy metal ions. The brilliance of adsorption property of MFSNs has been realized through comprehensive adsorption studies and detailed kinetics. Due to their larger dimension, MFSNs help in overcoming the Brownian motion which facilitates easy separation of the metal ion sorbed secondary nanostructures and also do not get drained out during filtration, thus providing pure water. PMID:26602613

  19. Mesoporous magnetic secondary nanostructures as versatile adsorbent for efficient scavenging of heavy metals

    NASA Astrophysics Data System (ADS)

    Bhattacharya, Kakoli; Parasar, Devaborniny; Mondal, Bholanath; Deb, Pritam

    2015-11-01

    Porous magnetic secondary nanostructures exhibit high surface area because of the presence of plentiful interparticle spaces or pores. Mesoporous Fe3O4 secondary nanostructures (MFSNs) have been studied here as versatile adsorbent for heavy metal scavenging. The porosity combined with magnetic functionality of the secondary nanostructures has facilitated efficient heavy metal (As, Cu and Cd) remediation from water solution within a short period of contact time. It is because of the larger surface area of MFSNs due to the porous network in addition to primary nanostructures which provides abundant adsorption sites facilitating high adsorption of the heavy metal ions. The brilliance of adsorption property of MFSNs has been realized through comprehensive adsorption studies and detailed kinetics. Due to their larger dimension, MFSNs help in overcoming the Brownian motion which facilitates easy separation of the metal ion sorbed secondary nanostructures and also do not get drained out during filtration, thus providing pure water.

  20. Polymer-coated mesoporous silica nanoparticles for the controlled release of macromolecules.

    PubMed

    Bhattacharyya, Sanjib; Wang, Henson; Ducheyne, Paul

    2012-09-01

    With the goal of achieving constant release of large biological molecules over an extended period of time we focused on hybrid inorganic/organic nanoparticles. We synthesized poly(ethylene glycol) (PEG)-coated mesoporous silica nanoparticles (MSNs) with incorporated trypsin inhibitor (TI), a model protein molecule for growth factors. Due to the goal of incorporating large protein molecules the pore size of the as-synthesized MSNs was expanded by a hydrothermal treatment prior to TI incorporation. In vitro release from the MSNs without the thin polymer film shows an initial burst followed by continuous release. In the case of polymer-coated MSNs the initial burst release was completely suppressed and approximate zero order release was achieved for 4 weeks. PMID:22688089

  1. Mesoporous and biocompatible surface active silica aerogel synthesis using choline formate ionic liquid.

    PubMed

    Meera, Kamal Mohamed Seeni; Sankar, Rajavelu Murali; Jaisankar, Sellamuthu N; Mandal, Asit Baran

    2011-09-01

    In this paper, we report the preparation and characterization of mesoporous and biocompatible transparent silica aerogel by the sol-gel polymerization of tetraethyl orthosilicate using ionic liquid. Choline cation based ionic liquid allows the silica framework to form in a non collapsing environment and controls the pore size of the gel. FT-IR spectra reveal the interaction of ionic liquid with surface -OH of the gel. DSC thermogram giving the evidence of confinement of ionic liquid within the silica matrix, which helps to avoid the shrinkage of the gel during the aging process. Nitrogen sorption measurements of gel prepared with ionic liquid exhibit a low surface area of 100.53 m2/g and high average pore size of 3.74 nm. MTT assay proves the biocompatibility and cell viability of the prepared gels. This new nanoporous silica material can be applied to immobilize biological molecules, which may retain their stability over a longer period. PMID:21565470

  2. Mesoporous magnetic secondary nanostructures as versatile adsorbent for efficient scavenging of heavy metals.

    PubMed

    Bhattacharya, Kakoli; Parasar, Devaborniny; Mondal, Bholanath; Deb, Pritam

    2015-01-01

    Porous magnetic secondary nanostructures exhibit high surface area because of the presence of plentiful interparticle spaces or pores. Mesoporous Fe3O4 secondary nanostructures (MFSNs) have been studied here as versatile adsorbent for heavy metal scavenging. The porosity combined with magnetic functionality of the secondary nanostructures has facilitated efficient heavy metal (As, Cu and Cd) remediation from water solution within a short period of contact time. It is because of the larger surface area of MFSNs due to the porous network in addition to primary nanostructures which provides abundant adsorption sites facilitating high adsorption of the heavy metal ions. The brilliance of adsorption property of MFSNs has been realized through comprehensive adsorption studies and detailed kinetics. Due to their larger dimension, MFSNs help in overcoming the Brownian motion which facilitates easy separation of the metal ion sorbed secondary nanostructures and also do not get drained out during filtration, thus providing pure water. PMID:26602613

  3. Interactions of Plutonium and Lanthanides with Ordered Mesoporous Materials

    NASA Astrophysics Data System (ADS)

    Parsons-Moss, Tashi

    Ordered mesoporous materials are porous solids with a regular, patterned structure composed of pores between 2 and 50 nm wide. Such materials have attracted much attention in the past twenty years because the chemistry of their synthesis allows control of their unique physicochemical properties, which can be tuned for a variety of applications. Generally, ordered mesoporous materials have very high specific surface areas and pore volumes, and offer unique structures that are neither crystalline nor amorphous. The large tunable interface provided by ordered mesoporous solids may be advantageous in applications involving sequestration, separation, or detection of actinides and lanthanides in solution. However, the fundamental chemical interactions of actinides and lanthanides must be understood before applications can be implemented. This dissertation focuses primarily on the fundamental interactions of plutonium with organically modified mesoporous silica, as well as several different porous carbon materials, both untreated and chemically oxidized. A method for functionalizing mesoporous silica by self assembly and molecular grafting of functional organosilane ligands was optimized for the 2D-hexagonal ordered mesoporous silica known as SBA-15 (Santa Barbara amorphous silica). Four different organically-modified silica materials were synthesized and characterized with several techniques. To confirm that covalent bonds were formed between the silane anchor of the ligand and the silica substrate, functionalized silica samples were analyzed with 29Si nuclear magnetic resonance spectroscopy. Infrared spectroscopy was used in combination with 13C and 31P nuclear magnetic resonance spectroscopy to verify the molecular structures of the ligands after they were synthesized and grafted to the silica. The densities of the functional silane ligands on the silica surface were estimated using thermogravimetric analysis. Batch sorption experiments were conducted with solutions of

  4. Noble Metal Nanoparticle-loaded Mesoporous Oxide Microspheres for Catalysis

    NASA Astrophysics Data System (ADS)

    Jin, Zhao

    Noble metal nanoparticles/nanocrystals have attracted much attention as catalysts due to their unique characteristics, including high surface areas and well-controlled facets, which are not often possessed by their bulk counterparts. To avoid the loss of their catalytic activities brought about by their size and shape changes during catalytic reactions, noble metal nanoparticles/nanocrystals are usually dispersed and supported finely on solid oxide supports to prevent agglomeration, nanoparticle growth, and therefore the decrease in the total surface area. Moreover, metal oxide supports can also play important roles in catalytic reactions through the synergistic interactions with loaded metal nanoparticles/nanocrystals. In this thesis, I use ultrasonic aerosol spray to produce hybrid microspheres that are composed of noble metal nanoparticles/nanocrystals embedded in mesoporous metal oxide matrices. The mesoporous metal oxide structure allows for the fast diffusion of reactants and products as well as confining and supporting noble metal nanoparticles. I will first describe my studies on noble metal-loaded mesoporous oxide microspheres as catalysts. Three types of noble metals (Au, Pt, Pd) and three types of metal oxide substrates (TiO2, ZrO2, Al 2O3) were selected, because they are widely used for practical catalytic applications involved in environmental cleaning, pollution control, petrochemical, and pharmaceutical syntheses. By considering every possible combination of the noble metals and oxide substrates, nine types of catalyst samples were produced. I characterized the structures of these catalysts, including their sizes, morphologies, crystallinity, and porosities, and their catalytic performances by using a representative reduction reaction from nitrobenzene to aminobenzene. Comparison of the catalytic results reveals the effects of the different noble metals, their incorporation amounts, and oxide substrates on the catalytic abilities. For this particular

  5. Periodic cages.

    PubMed

    Diudea, Mircea V; Nagy, Csaba L; Silaghi-Dumitrescu, Ioan; Graovac, Ante; Janezic, Dusanka; Vikić-Topić, Drazen

    2005-01-01

    Various cages are constructed by using three types of caps: f-cap (derived from spherical fullerenes by deleting zones of various size), kf-cap (obtainable by cutting off the polar ring, of size k), and t-cap ("tubercule"-cap). Building ways are presented, some of them being possible isomerization routes in the real chemistry of fullerenes. Periodic cages with ((5,7)3) covering are modeled, and their constitutive typing enumeration is given. Spectral data revealed some electronic periodicity in fullerene clusters. Semiempirical and strain energy calculations complete their characterization. PMID:15807490

  6. Multitasking mesoporous nanomaterials for biorefinery applications

    NASA Astrophysics Data System (ADS)

    Kandel, Kapil

    Mesoporous silica nanoparticles (MSNs) have attracted great interest for last two decades due to their unique and advantageous structural properties, such as high surface area, pore volume, stable mesostructure, tunable pore size and controllable particle morphology. The robust silica framework provides sites for organic modifications, making MSNs ideal platforms for adsorbents and supported organocatalysts. In addition, the pores of MSNs provide cavities/ channels for incorporation of metal and metal oxide nanoparticle catalysts. These supported metal nanoparticle catalysts benefit from confined local environments to enhance their activity and selectivity for various reactions. Biomass is considered as a sustainable feedstock with potential to replace diminishing fossil fuels for the production of biofuels. Among several strategies, one of the promising methods of biofuel production from biomass is to reduce the oxygen content of the feedstock in order to improve the energy density. This can be achieved by creating C-C bonds between biomass derived intermediates to increase the molecular weight of the final hydrocarbon molecules. In this context, pore size and organic functionality of MSNs are varied to obtain the ideal catalyst for a C-C bond forming reaction: the aldol condensation. The mechanistic aspects of this reaction in supported heterogeneous catalysts are explored. The modification of supported organocatalyst and the effect of solvent on the reaction are rationalized. The significance of two functional surfaces of MSNs is exploited by enzyme immobilization on the external surface and organo catalyst functionalization on the internal surface. Using this bifunctional catalyst, the tandem conversion of small chain alcohols into longer chain hydrocarbon molecules is demonstrated. The ability to incorporate metal and metal oxide nanoparticles in the pores and subsequent functionalization led to develop organic modified magnetic MSNs (OM-MSNs) for applications

  7. Multitasking mesoporous nanomaterials for biorefinery applications

    SciTech Connect

    Kandel, Kapil

    2013-01-01

    Mesoporous silica nanoparticles (MSNs) have attracted great interest for last two decades due to their unique and advantageous structural properties, such as high surface area, pore volume, stable mesostructure, tunable pore size and controllable particle morphology. The robust silica framework provides sites for organic modifications, making MSNs ideal platforms for adsorbents and supported organocatalysts. In addition, the pores of MSNs provide cavities/ channels for incorporation of metal and metal oxide nanoparticle catalysts. These supported metal nanoparticle catalysts benefit from confined local environments to enhance their activity and selectivity for various reactions. Biomass is considered as a sustainable feedstock with potential to replace diminishing fossil fuels for the production of biofuels. Among several strategies, one of the promising methods of biofuel production from biomass is to reduce the oxygen content of the feedstock in order to improve the energy density. This can be achieved by creating C-C bonds between biomass derived intermediates to increase the molecular weight of the final hydrocarbon molecules. In this context, pore size and organic functionality of MSNs are varied to obtain the ideal catalyst for a C-C bond forming reaction: the aldol condensation. The mechanistic aspects of this reaction in supported heterogeneous catalysts are explored. The modification of supported organocatalyst and the effect of solvent on the reaction are rationalized. The significance of two functional surfaces of MSNs is exploited by enzyme immobilization on the external surface and organo catalyst functionalization on the internal surface. Using this bifunctional catalyst, the tandem conversion of small chain alcohols into longer chain hydrocarbon molecules is demonstrated. The ability to incorporate metal and metal oxide nanoparticles in the pores and subsequent functionalization led to develop organic modified magnetic MSNs (OM-MSNs) for applications

  8. Direct coating of mesoporous titania on CTAB-capped gold nanorods

    NASA Astrophysics Data System (ADS)

    Zhao, Junwei; Xu, Pengyu; Li, Yue; Wu, Jian; Xue, Junfei; Zhu, Qiannan; Lu, Xuxing; Ni, Weihai

    2016-03-01

    We demonstrate a CTAB-templated approach towards direct coating of mesoporous titania on gold nanorods in aqueous solutions. The formation of the mesoporous shell is found to be closely correlated with CTAB concentration and the amount of the titania precursor. This approach can be readily extended to form mesoporous titania shells on other CTAB-capped nanoparticles.We demonstrate a CTAB-templated approach towards direct coating of mesoporous titania on gold nanorods in aqueous solutions. The formation of the mesoporous shell is found to be closely correlated with CTAB concentration and the amount of the titania precursor. This approach can be readily extended to form mesoporous titania shells on other CTAB-capped nanoparticles. Electronic supplementary information (ESI) available: Experimental details including chemicals, sample preparation, and characterization methods. UV-Vis extinction spectra, SEM images, and TEM images of AuNR@mTiO2 nanostructures. See DOI: 10.1039/c5nr05692f

  9. Synthesis, characterization and catalytic activity of a novel mesoporous ZSM-5 zeolite

    SciTech Connect

    Ma, Yuanyuan; Hu, Jing; Jia, Lihua; Li, Zhifang; Kan, Qiubin; Wu, Shujie

    2013-05-15

    Highlights: ► Mesoporous ZSM-5 zeolites. ► The strong acidic intensity. ► High activity for the alkylation of phenol and tert-butyl alcohol. ► Remarkable hydrothermal stability. - Abstract: A novel mesoporous ZSM-5 zeolite was hydrothermally synthesized using glucose as a template. Characterizations by XRD, TEM and nitrogen isotherms indicated that ZSM-5 possessed worm-like mesoporous. {sup 27}Al-MAS-NMR and NH{sub 3}-TPD showed that the mesoporous ZSM-5 preserved tetrahedral coordination aluminum and stronger acidity than conventional mesoporous material. As-prepared mesoporous ZSM-5 was successfully used in alkylation reaction of phenol with tert-butanol and exhibited significantly high phenol conversion and 2,4-DTBP selectivity. In addition, the hydrothermal stability was also studied by boiling in water for 7 days and displayed good results.

  10. Post-treatment and characterization of novel luminescent hybrid bimodal mesoporous silicas

    NASA Astrophysics Data System (ADS)

    Li, Yuzhen; Sun, Jihong; Wu, Xia; Lin, Li; Gao, Lin

    2010-08-01

    A novel luminescent hybrid bimodal mesoporous silicas (LHBMS) were synthesized via grafting 1,8-Naphthalic anhydride into the pore channels of bimodal mesoporous silicas (BMMs) for the first time. The resulting samples were characterized by powder X-ray diffraction (XRD), N 2 adsorption/desorption measurement, Fourier transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM), UV-vis absorption spectroscopy, and Photoluminescence spectroscopy (PL). The results show that 1,8-Naphthalic anhydride organic groups have been successfully introduced into the mesopores of the BMMs and the hybrid silicas are of bimodal mesoporous structure with the ordered small mesopores of around 3 nm and the large mesopores of uniform intra-nanoparticle. The excellent photoluminescent performance of LHBMS has a blue shift compared to that of 2-[3-(triethoxysilyl) propyl-1 H-Benz [de]isoquinoline-1, 3(2 H)-dione, suggesting the existence of the quantum confinement effectiveness.

  11. Highly ordered mesoporous silica nanoparticles and their application to DNA separation

    NASA Astrophysics Data System (ADS)

    Lee, Hye Sun; Chang, Jeong Ho

    2008-12-01

    This work describes the innovative development of high throughput human DNA purification process using the molecular self-assembled mesoporous silica nanoparticles. The mesoporous silica nanoparticles were prepared by sol-gel method and the formation of molecular self-assembled monolayers with functional groups was chemically demonstrated. The surface modification of functional groups was performed with aminofunctionallized organic silanes on mesoporous silica nanoparticles and the results of DNA separation was represented with electrophoresis images.

  12. Introduction of bridging and pendant organic groups into mesoporous alumina materials.

    PubMed

    Grant, Stacy M; Woods, Stephan M; Gericke, Arne; Jaroniec, Mietek

    2011-11-01

    Incorporation of organic functionalities into soft-templated mesoporous alumina was performed via organosilane-assisted evaporation induced self-assembly using aluminum alkoxide precursors and block copolymer templates. This strategy permits one to obtain mesoporous alumina-based materials with tailorable adsorption, surface and structural properties. Isocyanurate, ethane, mercaptopropyl, and ureidopropyl-functionalized mesoporous alumina materials were synthesized with relatively high surface area and large pore volume with uniform and wormhole-like mesopores. The presence of organosilyl groups within these hybrid materials was confirmed by IR or Raman spectroscopy and their concentration was determined by elemental analysis. PMID:21988174

  13. Using mesoporous carbon electrodes for brackish water desalination.

    PubMed

    Zou, Linda; Li, Lixia; Song, Huaihe; Morris, Gayle

    2008-04-01

    Electrosorptive deionisation is an alternative process to remove salt ions from the brackish water. The porous carbon materials are used as electrodes. When charged in low voltage electric fields, they possess a highly charged surface that induces adsorption of salt ions on the surface. This process is reversible, so the adsorbed salt ions can be desorbed and the electrode can be reused. In the study, an ordered mesoporous carbon (OMC) electrode was developed for electrosorptive desalination. The effects of pore arrangement pattern (ordered and random) and pore size distribution (mesopores and micropores) on the desalination performance was investigated by comparing OMC and activated carbon (AC). It were revealed from X-ray diffraction and N(2) sorption measurements that AC has both micropores and mesopores, whereas ordered mesopores are dominant in OMC. Their performance as potential electrodes to remove salt was evaluated by cyclic voltammetry (CV) and galvanostatic charge/discharge tests at a range of electrolyte concentrations and sweep rates. It is deduced that under the same electrochemical condition the specific capacitance values of OMC electrode (i.e. 133 F/g obtained from CV at a sweep rate of 1 mV/s in 0.1M NaCl solution) are larger than those of AC electrode (107 F/g), suggesting that the former has a higher desalting capacity than the latter. Furthermore, the OMC electrode shows a better rate capacity than the AC electrode. In addition, the desalination capacities were quantified by the batch-mode experiment at low voltage of 1.2V in 25 ppm NaCl solution (50 micros/cm conductivity). It was found that the adsorbed ion amounts of OMC and AC electrodes were 11.6 and 4.3 micromol/g, respectively. The excellent electrosorptive desalination performance of OMC electrode might be not only due to the suitable pore size (average of 3.3 nm) for the propagation of the salt ions, but also due to the ordered mesoporous structure that facilitates desorption of the

  14. Morphological Control of Multifunctional Mesoporous Silica Nanomaterials for Catalysis Applications

    SciTech Connect

    Seong Huh

    2004-12-19

    I found an efficient method to control the morphology of the organically monofunctionalized mesoporous silica materials by introducing different types of organoalkoxysilanes in a base-catalyzed co-condensation reaction. The monofunctionalized materials exhibit different particle morphologies relative to the pure MCM-41 material. The concentration dependence of the morphology is a critical factor to determine the final particle shape. A proposed mechanism of the shape evolution is also offered. After understanding the role of organoalkoxysilanes in producing various well-shaped nanomaterials, I also obtained a series of bifunctional mesoporous silica materials with certain particle morphology. A series of bifunctional mesoporous silica nanospheres (MSNs) whose physicochemical properties was investigated via solid state NMR techniques and Cu{sup 2+} adsorption capacity tests, The ratio of two different organic groups inside of mesopores of these MSNs could be fine-tuned. These MSNs serve as a useful model system to study substrate selectivity in catalytic reactions and sorption phenomena. For example, the Cu{sup 2+} adsorption capacity of these materials was dictated by the chemical nature of the mesopores generated by the different organic functional groups. An investigation of the substrate selectivity of the bifunctionalized MSNs in a competitive nitroaldol reaction using an equimolar amount of two competing 4-nitrobenzaldehyde derivatives was performed. Shape-controlled bifunctional MSNs were employed as the catalysts. The properties of the MSNs were investigated using various spectroscopic methods and electron microscopy. The more hydrophobic the surface organic groups are, the higher the ratio of hydrophobic final product. This is the first example to demonstrate the selection of substrate using physicochemical nature of the mesopore surface other than the conventional shape selection in zeolite systems. I also created a cooperative dual catalyst system that is

  15. Morphological control of multifunctionalized mesoporous silica nanomaterials for catalysis applications

    NASA Astrophysics Data System (ADS)

    Huh, Seong

    I found an efficient method to control the morphology of the organically monofunctionalized mesoporous silica materials by introducing different types of organoalkoxysilanes in a base-catalyzed co-condensation reaction. The monofunctionalized materials exhibit different particle morphologies relative to the pure MCM-41 material. The concentration dependence of the morphology is a critical factor to determine the final particle shape. A proposed mechanism of the shape evolution is also offered. After understanding the role of organoalkoxysilanes in producing various well-shaped nanomaterials, I also obtained a series of bifunctional mesoporous silica materials with certain particle morphology. A series of bifunctional mesoporous silica nanospheres (MSNs) whose physicochemical properties was investigated via solid state NMR techniques and Cu 2+ adsorption capacity tests. The ratio of two different organic groups inside of mesopores of these MSNs could be fine-tuned. These MSNs serve as a useful model system to study substrate selectivity in catalytic reactions and sorption phenomena. For example, the Cu2+ adsorption capacity of these materials was dictated by the chemical nature of the mesopores generated by the different organic functional groups. An investigation of the substrate selectivity of the bifunctionalized MSNs in a competitive nitroaldol reaction using an equimolar amount of two competing 4-nitrobenzaldehyde derivatives was performed. Shape-controlled bifunctional MSNs were employed as the catalysts. The properties of the MSNs were investigated using various spectroscopic methods and electron microscopy. The more hydrophobic the surface organic groups are, the higher the ratio of hydrophobic final product. This is the first example to demonstrate the selection of substrate using physicochemical nature of the mesopore surface other than the conventional shape selection in zeolite systems. I also created a cooperative dual catalyst system that is capable of

  16. Periodic Polymers

    NASA Astrophysics Data System (ADS)

    Thomas, Edwin

    2013-03-01

    Periodic polymers can be made by self assembly, directed self assembly and by photolithography. Such materials provide a versatile platform for 1, 2 and 3D periodic nano-micro scale composites with either dielectric or impedance contrast or both, and these can serve for example, as photonic and or phononic crystals for electromagnetic and elastic waves as well as mechanical frames/trusses. Compared to electromagnetic waves, elastic waves are both less complex (longitudinal modes in fluids) and more complex (longitudinal, transverse in-plane and transverse out-of-plane modes in solids). Engineering of the dispersion relation between wave frequency w and wave vector, k enables the opening of band gaps in the density of modes and detailed shaping of w(k). Band gaps can be opened by Bragg scattering, anti-crossing of bands and discrete shape resonances. Current interest is in our group focuses using design - modeling, fabrication and measurement of polymer-based periodic materials for applications as tunable optics and control of phonon flow. Several examples will be described including the design of structures for multispectral band gaps for elastic waves to alter the phonon density of states, the creation of block polymer and bicontinuous metal-carbon nanoframes for structures that are robust against ballistic projectiles and quasi-crystalline solid/fluid structures that can steer shock waves.

  17. Catalytic Mesoporous Janus Nanomotors for Active Cargo Delivery

    PubMed Central

    2015-01-01

    We report on the synergy between catalytic propulsion and mesoporous silica nanoparticles (MSNPs) for the design of Janus nanomotors as active cargo delivery systems with sizes <100 nm (40, 65, and 90 nm). The Janus asymmetry of the nanomotors is given by electron beam (e-beam) deposition of a very thin platinum (2 nm) layer on MSNPs. The chemically powered Janus nanomotors present active diffusion at low H2O2 fuel concentration (i.e., <3 wt %). Their apparent diffusion coefficient is enhanced up to 100% compared to their Brownian motion. Due to their mesoporous architecture and small dimensions, they can load cargo molecules in large quantity and serve as active nanocarriers for directed cargo delivery on a chip. PMID:25844893

  18. Chemoradiotherapeutic wrinkled mesoporous silica nanoparticles for use in cancer therapy

    SciTech Connect

    Munaweera, Imalka; Balkus, Kenneth J. Jr. E-mail: Anthony.DiPasqua@unthsc.edu; Koneru, Bhuvaneswari; Shi, Yi; Di Pasqua, Anthony J. E-mail: Anthony.DiPasqua@unthsc.edu

    2014-11-01

    Over the last decade, the development and application of nanotechnology in cancer detection, diagnosis, and therapy have been widely reported. Engineering of vehicles for the simultaneous delivery of chemo- and radiotherapeutics increases the effectiveness of the therapy and reduces the dosage of each individual drug required to produce an observable therapeutic response. We here developed a novel chemoradiotherapeutic 1,2-dioleoyl-sn-glycero-3-phosphocholine lipid coated/uncoated platinum drug loaded, holmium-containing, wrinkled mesoporous silica nanoparticle. The materials were characterized with TEM, FTIR, {sup 1}H NMR, energy dispersive x-ray, inductively coupled plasma-mass spectrometry, and zeta potential measurements. In vitro platinum drug release from both lipid coated and uncoated chemoradiotherapeutic wrinkled mesoporous silica are reported. Various kinetic models were used to analyze the release kinetics. The radioactivity of the chemoradiotherapeutic nanocarriers was measured after neutron-activation.

  19. Preparation and characterization of well ordered mesoporous diopside nanobiomaterial.

    PubMed

    Wei, Jie; Lu, Jingxiong; Yan, Yonggang; Li, Hong; Ma, Jian; Wu, Xiaohui; Dai, Chenglong; Liu, Changsheng

    2011-12-01

    Well ordered mesoporous diopside (OMD) nanobiomaterial was synthesized by a sol-gel process. The in vitro bioactivity of the OMD was evaluated by investigating the apatite-forming ability in simulated body fluid (SBF), and the hemostatic activity of the OMD was determined by measuring the activated partial thromboplastin time (APTT) and prothrombin time (PT) in vitro. The results suggested that the OMD exhibited excellent in vitro bioactivity, with surface apatite formation for OMD exceeding that of non-mesoporous diopside (n-MD) at 7 days. Moreover, the OMD with high surface area possessed good hemostatic property because it could absorb a large number of water from the blood. In conclusion, the prepared OMD had excellent bioactivity and hemostatic activity, which can not only be applied as bone repair biomaterial for bone regeneration, but also as hemostatic agent for surgery hemostasis. PMID:22408987

  20. In Situ Loading of Drugs into Mesoporous Silica SBA-15.

    PubMed

    Wan, Mi Mi; Li, Yan Yan; Yang, Tian; Zhang, Tao; Sun, Xiao Dan; Zhu, Jian Hua

    2016-04-25

    In a new strategy for loading drugs into mesoporous silica, a hydrophilic (heparin) or hydrophobic drug (ibuprofen) is encapsulated directly in a one-pot synthesis by evaporation-induced self-assembly. In situ drug loading significantly cuts down the preparation time and dramatically increases the loaded amount and released fraction of the drug, and appropriate drug additives favor a mesoporous structure of the vessels. Drug loading was verified by FTIR spectroscopy and release tests, which revealed much longer release with a larger amount of heparin or ibuprofen compared to postloaded SBA-15. Besides, the in vitro anticoagulation properties of the released heparin and the biocompatibility of the vessels were carefully assessed, including activated partial thromboplastin time, thrombin time, hemolysis, platelet adhesion experiments, and the morphologies of red blood cells. A concept of new drug-release agents with soft core and hard shell is proposed and offers guidance for the design of novel drug-delivery systems. PMID:26999658

  1. Chemoradiotherapeutic wrinkled mesoporous silica nanoparticles for use in cancer therapy

    NASA Astrophysics Data System (ADS)

    Munaweera, Imalka; Koneru, Bhuvaneswari; Shi, Yi; Di Pasqua, Anthony J.; Balkus, Kenneth J., Jr.

    2014-11-01

    Over the last decade, the development and application of nanotechnology in cancer detection, diagnosis, and therapy have been widely reported. Engineering of vehicles for the simultaneous delivery of chemo- and radiotherapeutics increases the effectiveness of the therapy and reduces the dosage of each individual drug required to produce an observable therapeutic response. We here developed a novel chemoradiotherapeutic 1,2-dioleoyl-sn-glycero-3-phosphocholine lipid coated/uncoated platinum drug loaded, holmium-containing, wrinkled mesoporous silica nanoparticle. The materials were characterized with TEM, FTIR, 1H NMR, energy dispersive x-ray, inductively coupled plasma-mass spectrometry, and zeta potential measurements. In vitro platinum drug release from both lipid coated and uncoated chemoradiotherapeutic wrinkled mesoporous silica are reported. Various kinetic models were used to analyze the release kinetics. The radioactivity of the chemoradiotherapeutic nanocarriers was measured after neutron-activation.

  2. Oriented mesoporous nanopyramids as versatile plasmon-enhanced interfaces.

    PubMed

    Kong, Biao; Tang, Jing; Selomulya, Cordelia; Li, Wei; Wei, Jing; Fang, Yin; Wang, Yongcheng; Zheng, Gengfeng; Zhao, Dongyuan

    2014-05-14

    We developed a facile interfacial oriented growth and self-assembly process to fabricate three-dimensional (3D) aligned mesoporous iron oxide nanopyramid arrays (NPAs). The unique NPAs possess a 3D mesostructure with multiple features, including high surface area (~175 m(2)/g), large pore size (~20 nm), excellent flexibility (bent over 150 times), and scalability at the foot scale for practical applications. More importantly, these NPAs structures enable versatile enhancement of localized surface plasmon resonance and photoelectrochemical conversion. The integration of plasmonic gold with 3D NPAs remarkably improves the performance of photoelectrochemical conversion, leading to ~6- and 83-fold increases of the photocurrent under simulated solar and visible-light illumination, respectively. The fabrication and investigation of NPAs provide a new paradigm for preparing unconventional mesoporous oriented thin films and further suggest a new strategy for designing plasmonic metal/semiconductor systems for effective solar energy harvesting. PMID:24786963

  3. Synthesis and characterization of acidic mesoporous borosilicate thin films.

    PubMed

    Xiu, Tongping; Liu, Qian; Wang, Jiacheng

    2009-02-01

    Work on the synthesis and characterization of acidic wormhole-like ordered mesoporous borosilicate thin films (MBSTFs) on silicon wafers is described in this paper. The MBSTFs coated by the dip-coating method were prepared through an evaporation-induced self-assembly (EISA) process using nonionic block copolymers as structure-directing agents. Fourier transform infrared (FT-IR) spectroscopy confirmed the formation of borosiloxane bonds (Si-O-B). High-resolution transmission electron microscopy (HRTEM) and N2 sorption evidenced a wormhole-like mesoporous structure in the MBSTFs obtained. Scanning electron microscopy (SEM) images of the cross sections and surfaces of the samples showed that MBSTFs on silicon wafers were continuous, homogeneous and did not crack. The acidic properties of the MBSTFs were characterized by FT-IR spectra of chemisorbed pyridine. The MBSTFs thus prepared may find their future applications in many fields including chemical sensors, catalysis, optical coating, molecule separation, etc. PMID:19441565

  4. Mesoporous Silica Nanoparticles and Films for Cargo Delivery

    NASA Astrophysics Data System (ADS)

    Guardado Alvarez, Tania Maria

    Mesoporous silica materials are well known materials that can range from films to nanoparticles. Mesoporous silica nanoparticles (MSNs) and mesoporous silica films have been of increasing interest among the scientific community for its use in cargo delivery. Silica provides ease of functionalization, a robust support and biocompatibility. Several methods have been used in order to give the mesoporous silica nanomaterials different qualities that render them a useful material with different characteristics. Among these methods is surface modification by taking advantage of the OH groups on the surface. When a molecule attached to the surface can act as a molecular machine it transforms the nanomaterial to act as delivery system that can be activated upon command. The work covered in this thesis focuses on the development and synthesis of different mesoporous silica materials for the purpose of trapping and releasing cargo molecules. Chapter 2 focuses in the photoactivation of "snap-top" stoppers over the pore openings of mesoporous silica nanoparticles that releases intact cargo molecules from the pores. The on-command release can be stimulated by either one UV photon or two coherent near-IR photons. Two-photon activation is particularly desirable for use in biological systems because it enables good tissue penetration and precise spatial control. Chapter 3 focuses on the design and synthesis of a nano-container consisting of mesoporous silica nanoparticles with the pore openings covered by "snap-top" caps that are opened by near-IR light. A photo transducer molecule that is a reducing agent in an excited electronic state is covalently attached to the system. Near IR two-photon excitation causes intermolecular electron transfer that reduces a disulfide bond holding the cap in place, thus allowing the cargo molecules to escape. The operation of the "snap-top" release mechanism by both one- and two photon is described. This system presents a proof of concept of a near

  5. Impact of Surface Chemistry on Copper Deposition in Mesoporous Silicon.

    PubMed

    Darwich, Walid; Garron, Anthony; Bockowski, Piotr; Santini, Catherine; Gaillard, Frédéric; Haumesser, Paul-Henri

    2016-08-01

    An easy, efficient, and safe process is developed to metallize mesoporous silicon (PSi) with Cu from the decomposition of a solution of mesitylcopper (CuMes) in an imidazolium-based ionic liquid (IL), [C1C4Im][NTf2]. The impregnation of a solution of CuMes in IL affords the deposition of metallic islands not only on the surface but also deep within the pores of a mesoporous Si layer with small pores below 10 nm. Therefore, this process is well suited to efficiently and completely metallize PSi layers. An in-depth mechanistic study shows that metal deposition is due to the reduction of CuMes by surface silane groups rather than by Si oxidation as observed in aqueous or water-containing media. This could open a new route to the chemical metallization of PSi by less-noble metals difficult to attain by a conventional displacement reaction. PMID:27368422

  6. Adsorption of benzene, cyclohexane and hexane on ordered mesoporous carbon.

    PubMed

    Wang, Gang; Dou, Baojuan; Zhang, Zhongshen; Wang, Junhui; Liu, Haier; Hao, Zhengping

    2015-04-01

    Ordered mesoporous carbon (OMC) with high specific surface area and large pore volume was synthesized and tested for use as an adsorbent for volatile organic compound (VOC) disposal. Benzene, cyclohexane and hexane were selected as typical adsorbates due to their different molecular sizes and extensive utilization in industrial processes. In spite of their structural differences, high adsorption amounts were achieved for all three adsorbates, as the pore size of OMC is large enough for the access of these VOCs. In addition, the unusual bimodal-like pore size distribution gives the adsorbates a higher diffusion rate compared with conventional adsorbents such as activated carbon and carbon molecular sieve. Kinetic analysis suggests that the adsorption barriers mainly originated from the difficulty of VOC vapor molecules entering the pore channels of adsorbents. Therefore, its superior adsorption ability toward VOCs, together with a high diffusion rate, makes the ordered mesoporous carbon a promising potential adsorbent for VOC disposal. PMID:25872710

  7. Catalytic conversion of cellulose over mesoporous Y zeolite.

    PubMed

    Park, Young-Kwon; Jun, Bo Ram; Park, Sung Hoon; Jeon, Jong-Ki; Lee, See Hoon; Kim, Seong-Soo; Jeong, Kwang-Eun

    2014-07-01

    Mesoporous Y zeolite (Meso-Y) was applied, for the first time, to the catalytic pyrolysis of cellulose which is a major constituent of lignocellulosic biomass, to produce high-quality bio-oil. A representative mesoporous catalyst Al-MCM-41 was also used to compare its catalytic activity with that of Meso-Y. Pyrolysis-gas chromatography/mass spectrometry was used for the experiments. Meso-Y, with higher acidity, led to larger yields of aromatics and furans with high value-added than Al-MCM-41, resulting in the production of bio-oil with higher quality. The effect of temperature on the catalytic pyrolysis was not significant within the range of 400-500 degrees C. When the Meso-Y to cellulose ratio was increased from 1/1 via 2/1 to 3/1, the deoxygenation efficiency increased, leading to increased yield of aromatics. PMID:24757989

  8. A series of highly stable mesoporous metalloporphyrin Fe-MOFs.

    PubMed

    Wang, Kecheng; Feng, Dawei; Liu, Tian-Fu; Su, Jie; Yuan, Shuai; Chen, Ying-Pin; Bosch, Mathieu; Zou, Xiaodong; Zhou, Hong-Cai

    2014-10-01

    A series of mesoporous metalloporphyrin Fe-MOFs, namely PCN-600(M) (M = Mn, Fe, Co, Ni, Cu), have been synthesized using the preassembled [Fe3O(OOCCH3)6] building block. PCN-600 exhibits a one-dimensional channel as large as 3.1 nm and the highest experimental pore volume of 1.80 cm(3)g(-1) among all the reported porphyrinic MOFs. It also shows very high stability in aqueous solutions with pH values ranging from 2-11 and is to our knowledge the only mesoporous porphyrinic MOF stable under basic aqueous conditions. PCN-600(Fe) has been demonstrated as an effective peroxidase mimic to catalyze the co-oxidation reaction. PMID:25208035

  9. Flash freezing route to mesoporous polymer nanofibre networks.

    PubMed

    Samitsu, Sadaki; Zhang, Rui; Peng, Xinsheng; Krishnan, Mohan Raj; Fujii, Yoshihisa; Ichinose, Izumi

    2013-01-01

    There are increasing requirements worldwide for advanced separation materials with applications in environmental protection processes. Various mesoporous polymeric materials have been developed and they are considered as potential candidates. It is still challenging, however, to develop economically viable and durable separation materials from low-cost, mass-produced materials. Here we report the fabrication of a nanofibrous network structure from common polymers, based on a microphase separation technique from frozen polymer solutions. The resulting polymer nanofibre networks exhibit large free surface areas, exceeding 300 m(2) g(-1), as well as small pore radii as low as 1.9 nm. These mesoporous polymer materials are able to rapidly adsorb and desorb a large amount of carbon dioxide and are also capable of condensing organic vapours. Furthermore, the nanofibres made of engineering plastics with high glass transition temperatures over 200 °C exhibit surprisingly high, temperature-dependent adsorption of organic solvents from aqueous solution. PMID:24145702

  10. Mesoporous silica nanoparticles for bioadsorption, enzyme immobilisation, and delivery carriers

    NASA Astrophysics Data System (ADS)

    Popat, Amirali; Hartono, Sandy Budi; Stahr, Frances; Liu, Jian; Qiao, Shi Zhang; Qing (Max) Lu, Gao

    2011-07-01

    Mesoporous silica nanoparticles (MSNs) provide a non-invasive and biocompatible delivery platform for a broad range of applications in therapeutics, pharmaceuticals and diagnosis. The creation of smart, stimuli-responsive systems that respond to subtle changes in the local cellular environment are likely to yield long term solutions to many of the current drug/gene/DNA/RNA delivery problems. In addition, MSNs have proven to be promising supports for enzyme immobilisation, enabling the enzymes to retain their activity, affording them greater potential for wide applications in biocatalysis and energy. This review provides a comprehensive summary of the advances made in the last decade and a future outlook on possible applications of MSNs as nanocontainers for storage and delivery of biomolecules. We discuss some of the important factors affecting the adsorption and release of biomolecules in MSNs and review of the cytotoxicity aspects of such nanomaterials. The review also highlights some promising work on enzyme immobilisation using mesoporous silica nanoparticles.

  11. Natural dye -sensitized mesoporous ZnO solar cell

    NASA Astrophysics Data System (ADS)

    Wu, Qishuang; Shen, Yue; Wu, Guizhi; Li, Linyu; Cao, Meng; Gu, Feng

    2010-10-01

    Natural dye-sensitized solar cells (N-DSSCs) were assembled using chlorophyll sensitized mesoporous ZnO (based on FTO) as the photoanode and platinum plate as the cathode. The natural dyes (chlorophyll) were extracted from spinach by simple procedure. The absorption spectrum and fluorescence spectrum of chlorophyll were studied. Mesoporous ZnO (m-ZnO) applied to the N-DSSCs was synthesized through hydrothermal method. The structures and morphologies were characterized by X-ray Diffraction (XRD) and diffuse reflection. The results indicated that the samples had an average pore size of 17 nm and the m-ZnO was hexagonal wurtzite structure. The performances of the N-DSSCs were investigated under AM 1.5G illumination. The Voc of the N-DSSCs was about 480mv, and the Isc was about 470μA. The performance of the N-DSSCs could be further improved by adjusting its structure.

  12. Natural dye -sensitized mesoporous ZnO solar cell

    NASA Astrophysics Data System (ADS)

    Wu, Qishuang; Shen, Yue; Wu, Guizhi; Li, Linyu; Cao, Meng; Gu, Feng

    2011-02-01

    Natural dye-sensitized solar cells (N-DSSCs) were assembled using chlorophyll sensitized mesoporous ZnO (based on FTO) as the photoanode and platinum plate as the cathode. The natural dyes (chlorophyll) were extracted from spinach by simple procedure. The absorption spectrum and fluorescence spectrum of chlorophyll were studied. Mesoporous ZnO (m-ZnO) applied to the N-DSSCs was synthesized through hydrothermal method. The structures and morphologies were characterized by X-ray Diffraction (XRD) and diffuse reflection. The results indicated that the samples had an average pore size of 17 nm and the m-ZnO was hexagonal wurtzite structure. The performances of the N-DSSCs were investigated under AM 1.5G illumination. The Voc of the N-DSSCs was about 480mv, and the Isc was about 470μA. The performance of the N-DSSCs could be further improved by adjusting its structure.

  13. Catalytic mesoporous Janus nanomotors for active cargo delivery.

    PubMed

    Ma, Xing; Hahn, Kersten; Sanchez, Samuel

    2015-04-22

    We report on the synergy between catalytic propulsion and mesoporous silica nanoparticles (MSNPs) for the design of Janus nanomotors as active cargo delivery systems with sizes <100 nm (40, 65, and 90 nm). The Janus asymmetry of the nanomotors is given by electron beam (e-beam) deposition of a very thin platinum (2 nm) layer on MSNPs. The chemically powered Janus nanomotors present active diffusion at low H2O2 fuel concentration (i.e., <3 wt %). Their apparent diffusion coefficient is enhanced up to 100% compared to their Brownian motion. Due to their mesoporous architecture and small dimensions, they can load cargo molecules in large quantity and serve as active nanocarriers for directed cargo delivery on a chip. PMID:25844893

  14. Fluorescent Functionalized Mesoporous Silica for Radioactive Material Extraction

    SciTech Connect

    Li, Juan; Zhu, Kake; Shang, Jianying; Wang, Donghai; Nie, Zimin; Guo, Ruisong; Liu, Chongxuan; Wang, Zheming; Li, Xiaolin; Liu, Jun

    2012-08-01

    Mesoporous silica with covalently bound salicylic acid molecules incorporated in the structure was synthesized with a one-pot, co-condensation reaction at room temperature. The as-synthesized material has a large surface area, uniform particle size, and an ordered pore structure as determined by characterization with transmission electron microscopy, thermal gravimetric analysis, and infrared spectra, etc. Using the strong fluorescence and metal coordination capability of salicylic acid, functionalized mesoporous silica (FMS) was developed to track and extract radionuclide contaminants, such as uranyl [U(VI)] ions encountered in subsurface environments. Adsorption measurements showed a strong affinity of the FMS toward U(VI) with a Kd value of 105 mL/g, which is four orders of magnitude higher than the adsorption of U(VI) onto most of the sediments in natural environments. The new materials have a potential for synergistic environmental monitoring and remediation of the radionuclide U(VI) from contaminated subsurface environments.

  15. Preparation and photoluminescence study of mesoporous indium hydroxide nanorods

    SciTech Connect

    Li, Changyu; Lian, Suoyuan; Liu, Yang; Liu, Shouxin; Kang, Zhenhui

    2010-02-15

    Mesoporous indium hydroxide nanorods were successfully synthesized by a mild one-step one-pot method. The obtained samples were characterized by X-ray diffraction, transmission electron microscopy with selected area electron diffraction, N{sub 2} adsorption, ultraviolet-visible absorption and photoluminescence, respectively. Transmission electron microscopy showed that there were some pores in the samples, which were mainly composed of rod-like shapes with length of 300 nm and diameter of 90 nm. N{sub 2} adsorption/desorption measurements confirmed that the prepared powder was mesoporous with average pore diameter of 3.1 nm. The ultraviolet-visible absorption spectroscopy analysis indicated that the band gap energy of the samples was 5.15 eV. Photoluminescence spectrum showed that there were two strong emissions under ultraviolet light irradiation. The growth mechanism of indium hydroxide nanorods and the role of cetyltrimethyl ammonium bromide were also discussed.

  16. Functionalized mesoporous silica materials for molsidomine adsorption: Thermodynamic study

    SciTech Connect

    Alyoshina, Nonna A.; Parfenyuk, Elena V.

    2013-09-15

    A series of unmodified and organically modified mesoporous silica materials was prepared. The unmodified mesoporous silica was synthesized via sol–gel synthesis in the presence of D-glucose as pore-forming agent. The functionalized by phenyl, aminopropyl and mercaptopropyl groups silica materials were prepared via grafting. The fabricated adsorbent materials were characterized by Fourier transform infrared spectroscopy (FTIR) analysis, N{sub 2} adsorption/desorption and elemental analysis methods. Then their adsorption properties for mesoionic dug molsidomine were investigated at 290–313 K and physiological pH value. Thermodynamic parameters of molsidomine adsorption on the synthesized materials have been calculated. The obtained results showed that the adsorption process of molsidomine on the phenyl modified silica is the most quantitatively and energetically favorable. The unmodified and mercaptopropyl modified silica materials exhibit significantly higher adsorption capacities and energies for molsidomine than the aminopropyl modified sample. The effects are discussed from the viewpoint of nature of specific interactions responsible for the adsorption. - Graphical abstract: Comparative analysis of the thermodynamic characteristics of molsidomine adsorption showed that the adsorption process on mesoporous silica materials is controlled by chemical nature of surface functional groups. Molsidomine adsorption on the phenyl modified silica is the most quantitatively and energetically favorable. Taking into account ambiguous nature of mesoionic compounds, it was found that molsidomine is rather aromatic than dipolar. Display Omitted - Highlights: • Unmodified and organically modified mesoporous silica materials were prepared. • Molsidomine adsorption on the silica materials was studied. • Phenyl modified silica shows the highest adsorption capacity and favorable energy. • Molsidomine exhibits the lowest affinity to aminopropyl modified silica.

  17. Electronic Parameters of Mesoporous Silicon Upon Adsorption of Plant Viruses

    NASA Astrophysics Data System (ADS)

    Vashpanov, Yuriy; Son, Jung-Young; Kwack, Kae-Dal; Shin, Seung-Jung

    2008-06-01

    Changes in the electronic parameters of mesoporous silicon upon adsorption of nematodetransmitted polyhedral (NEPO) viruses of plant [tomato ringspot virus (TORSV), grapevine virus A (GVA), and grapevine fan leaf virus (GFLV)] measured at room temperature are investigated. The adsorption of these viruses affected essentially on the electronic characteristic of the porous material. The measurement of the electronic characteristics of porous silicon can be applied to the creation of detectors for the presence of viruses in a given environment.

  18. Tailoring the mesoporous texture of graphitic carbon nitride.

    PubMed

    Yang, Jae-Hun; Kim, Gain; Domen, Kazunari; Choy, Jin-Ho

    2013-11-01

    Recently, graphitic carbon nitride (g-C3N4) materials have received a great attention from many researchers due to their various roles as a visible light harvesting photocatalyst, metal-free catalyst, reactive template, nitrogen source of nitridation reaction, etc. g-C3N4 could be prepared by temperature-induced polymerization of cyanamide or melamine. In this study, we report a preparation of mesoporous graphitic carbon nitrides with tailored porous texture including pore size, and specific surface area from cyanamide and colloidal silica nanoparticles (Ludox). At first, cyanamide-silica nanocomposites were prepared by mixing colloidal silica with different size in the range of 7-22 nm and cyanamide, followed by evaporating the solvent in the resulting mixture. Mesoporous g-C3N4 samples were prepared by calcining cyanamide-silica nanocomposite at 550 degrees C for 4 hrs and removing the silica nanoparticles by using ammonium hydrogen fluoride. The formation of g-C3N4 was confirmed by the sharp (002) peak (d = 3.25 A) of graphitic interlayer stacking, and the broad (100) peak (d = 6.86 A) of in-plane repeating unit in the X-ray diffraction patterns. According to N2 adsorption-desorption analysis, the pore size of mesoporous carbon nitrides was similar to the size of colloidal silica used as hard template (7-22 nm). The specific surface area of mesoporous g-C3N4 could be tailored in the range of 189 m2/g-288 m2/g. PMID:24245279

  19. Microwave-induced synthesis of highly dispersed gold nanoparticles within the pore channels of mesoporous silica

    SciTech Connect

    Gu Jinlou; Fan Wei; Shimojima, Atsushi; Okubo, Tatsuya

    2008-04-15

    Highly dispersed gold nanoparticles have been incorporated into the pore channels of SBA-15 mesoporous silica through a newly developed strategy assisted by microwave radiation (MR). The sizes of gold are effectively controlled attributed to the rapid and homogeneous nucleation, simultaneous propagation and termination of gold precursor by MR. Diol moieties with high dielectric and dielectric loss constants, and hence a high microwave activation, were firstly introduced to the pore channels of SBA-15 by a simple addition reaction between amino group and glycidiol and subsequently served as the reduction centers for gold nanoparticles. Extraction of the entrapped gold from the nanocomposite resulted in milligram quantities of gold nanoparticles with low dispersity. The successful assembly process of diol groups and formation of gold nanoparticles were monitored and tracked by solid-state NMR and UV-vis measurements. Characterization by small angle X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the incorporation of gold nanoparticles would not breakup the structural integrity and long-range periodicity of SBA-15. The gold nanoparticles had a narrow size distribution with diameters in the size range of 5-10 nm through TEM observation. The average particles size is 7.9 nm via calculation by the Scherrer formula and TEM measurements. Nitrogen adsorption and desorption isotherms gave further evidence that the employed method was efficient and gold nanoparticles were successfully incorporated into the pore channels of SBA-15. - Graphical abstract: A facile and novel strategy has been developed to incorporate gold nanoparticles into the pore channels of mesoporous SBA-15 assisted by microwave radiation (MR) with mild reaction condition and rapid reaction speed. Due to the rapid and homogeneous nucleation, simultaneous propagation and termination by MR, the size of gold nanoparticles are effectively controlled.

  20. High-surface Thermally Stable Mesoporous Gallium Phosphates Constituted by Nanoparticles as Primary Building Blocks

    SciTech Connect

    V Parvulescu; V Parvulescu; D Ciuparu; C Hardacre; H Garcia

    2011-12-31

    In constant, search for micro/mesoporous materials, gallium phosphates, have attracted continued interest due to the large pore size reported for some of these solids in comparison with analogous aluminum phosphates. However up to now, the porosity of gallium phosphates collapsed upon template removal or exposure to the ambient moisture. In the present work, we describe high-surface thermally stable mesoporous gallium phosphates synthesized from gallium propoxide and PCl{sub 3} and different templating agents such as amines (dipropylamine, piperidine and aminopiperidine) and quaternary ammonium salts (C{sub 16}H{sub 33}(CH{sub 3})3NBr and C{sub 16}PyCl). These highly reactive precursors have so far not been used as gallium and phosphate sources for the synthesis of gallophosphates. Conceptually, our present synthetic procedure is based on the fast formation of gallium phosphate nanoparticles via the reaction of gallium propoxide with PCl{sub 3} and subsequent construction of the porous material with nanoparticles as building blocks. The organization of the gallophosphate nanoparticles in stable porous structures is effected by the templates. Different experimental procedures varying the molar composition of the sol-gel, pH and the pretreatment of gallium precursor were assayed, most of them leading to satisfactory materials in terms of thermal stability and porosity. In this way, a series of gallium phosphates with surface are above 200 m{sup 2} g{sup -1}, and narrow pore size from 3 to 6 nm and remarkable thermal stability (up to 550 C) have been prepared. In some cases, the structure tends to show some periodicity and regularity as determined by XRD. The remarkable stability has allowed us to test the catalytic activity of gallophosphates for the aerobic oxidation of alkylaromatics with notable good results. Our report reopens the interest for gallophosphates in heterogeneous catalysis.

  1. Sonochemical fabrication of fluorinated mesoporous titanium dioxide microspheres

    SciTech Connect

    Yu Changlin; Yu, Jimmy C.; Chan Mui

    2009-05-15

    A sonochemical-hydrothermal method for preparing fluorinated mesoporous TiO{sub 2} microspheres was developed. Formation of mesoporous TiO{sub 2} and doping of fluorine was achieved by sonication and then hydrothermal treatment of a solution containing titanium isopropoxide, template, and sodium fluoride. The as-synthesized TiO{sub 2} microspheres were characterized by X-ray diffraction (XRD), Fourier translation infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) spectroscopy, photoluminescence spectroscopy (PL), and BET surface areas. The P123 template was removed completely during the hydrothermal and washing steps, which was different from the conventional calcination treatment. The as- synthesized TiO{sub 2} microspheres had good crystallinity and high stability. Results from the photocatalytic degradation of methylene blue (MB) showed that fluorination could remarkably improve the photocatalytic activity of titanium dioxide. - Graphical abstract: A novel method for preparing fluorinated mesoporous TiO{sub 2} microspheres was developed by a combined ultrasonic and hydrothermal treatment. The fluorinated TiO{sub 2} microspheres show high crystallinity, stability and enhanced photocatalytic activity.

  2. Aerosol-spray diverse mesoporous metal oxides from metal nitrates

    PubMed Central

    Kuai, Long; Wang, Junxin; Ming, Tian; Fang, Caihong; Sun, Zhenhua; Geng, Baoyou; Wang, Jianfang

    2015-01-01

    Transition metal oxides are widely used in solar cells, batteries, transistors, memories, transparent conductive electrodes, photocatalysts, gas sensors, supercapacitors, and smart windows. In many of these applications, large surface areas and pore volumes can enhance molecular adsorption, facilitate ion transfer, and increase interfacial areas; the formation of complex oxides (mixed, doped, multimetallic oxides and oxide-based hybrids) can alter electronic band structures, modify/enhance charge carrier concentrations/separation, and introduce desired functionalities. A general synthetic approach to diverse mesoporous metal oxides is therefore very attractive. Here we describe a powerful aerosol-spray method for synthesizing various mesoporous metal oxides from low-cost nitrate salts. During spray, thermal heating of precursor droplets drives solvent evaporation and induces surfactant-directed formation of mesostructures, nitrate decomposition and oxide cross-linking. Thirteen types of monometallic oxides and four groups of complex ones are successfully produced, with mesoporous iron oxide microspheres demonstrated for photocatalytic oxygen evolution and gas sensing with superior performances. PMID:25897988

  3. Synthesis and characterization of nanocrystalline and mesoporous zeolites

    NASA Astrophysics Data System (ADS)

    Petushkov, Anton

    2011-12-01

    Mesoporous aggregates of nanocrystalline zeolites with MFI and BEA frameworks have been synthesized using a one-pot and single structure directing agent. The effect of different reaction conditions, such as temperature, time, pH and water content, on the particle size, surface area and mesopore volume has been studied. Nanocrystalline and mesoporous ZSM-5, beta and Y zeolites were modified with different transition metals and the resulting single- and double metal containing catalyst materials were characterized. Nanocrystalline Silicalite-1 zeolite samples with varying particle size were functionalized with different organosilane groups and the cytotoxic activity of the zeolite nanocrystals was studied as a function of particle size, concentration, organic functional group type, as well as the type of cell line. Framework stability of nanocrystalline NaY zeolite was tested under different pH conditions. The synthesized zeolites used in this work were characterized using a variety of physico-chemical methods, including powder X-ray diffraction, Solid State NMR, nitrogen sorption, electron microscopy, Inductively Coupled Plasma -- Optical Emission Spectroscopy and X-ray Photoelectron Spectroscopy.

  4. Capacity of mesoporous bioactive glass nanoparticles to deliver therapeutic molecules

    NASA Astrophysics Data System (ADS)

    El-Fiqi, Ahmed; Kim, Tae-Hyun; Kim, Meeju; Eltohamy, Mohamed; Won, Jong-Eun; Lee, Eun-Jung; Kim, Hae-Won

    2012-11-01

    Inorganic bioactive nanomaterials are attractive for hard tissue regeneration, including nanocomponents for bone replacement composites and nanovehicles for delivering therapeutics. Bioactive glass nanoparticles (BGn) have recently gained potential usefulness as bone and tooth regeneratives. Here we demonstrate the capacity of the BGn with mesopores to load and deliver therapeutic molecules (drugs and particularly genes). Spherical BGn with sizes of 80-90 nm were produced to obtain 3-5 nm sized mesopores through a sono-reacted sol-gel process. A simulated body fluid test of the mesoporous BGn confirmed their excellent apatite forming ability and the cellular toxicity study demonstrated their good cell viability up to 100 μg ml-1. Small molecules like chemical drug (Na-ampicillin) and gene (small interfering RNA; siRNA) were introduced as model drugs considering the mesopore size of the nanoparticles. Moreover, amine-functionalization allowed switchable surface charge property of the BGn (from -20-30 mV to +20-30 mV). Loading of ampicillin or siRNA saturated within a few hours (~2 h) and reflected the mesopore structure. While the ampicillin released relatively rapidly (~12 h), the siRNA continued to release up to 3 days with almost zero-order kinetics. The siRNA-nanoparticles were easily taken up by the cells, with a transfection efficiency as high as ~80%. The silencing effect of siRNA delivered from the BGn, as examined by using bcl-2 model gene, showed dramatic down-regulation (~15% of control), suggesting the potential use of BGn as a new class of nanovehicles for genes. This, in conjunction with other attractive properties, including size- and mesopore-related high surface area and pore volume, tunable surface chemistry, apatite-forming ability, good cell viability and the possible ion-related stimulatory effects, will potentiate the usefulness of the BGn in hard tissue regeneration.Inorganic bioactive nanomaterials are attractive for hard tissue regeneration

  5. Rapid removal of bisphenol A on highly ordered mesoporous carbon.

    PubMed

    Sui, Qian; Huang, Jun; Liu, Yousong; Chang, Xiaofeng; Ji, Guangbin; Deng, Shubo; Xie, Tao; Yu, Gang

    2011-01-01

    Bisphenol A (BPA) is of global concern due to its disruption of endocrine systems and ubiquity in the aquatic environment. It is important, therefore, that efforts are made to remove it from the aqueous phase. A novel adsorbent, mesoporous carbon CMK-3, prepared from hexagonal SBA-15 mesoporous silica was studied for BPA removal from aqueous phase, and compared with conventional powdered activated carbon (PAC). Characterization of CMK-3 by transmission electron microscopy (TEM), X-ray diffraction, and nitrogen adsorption indicated that prepared CMK-3 had an ordered mesoporous structure with a high specific surface area of 920 m2/g and a pore-size of about 4.9 nm. The adsorption of BPA on CMK-3 followed a pseudo second-order kinetic model. The kinetic constant was 0.00049 g/(mg x min), much higher than the adsorption of BPA on PAC. The adsorption isotherm fitted slightly better with the Freundlich model than the Langmuir model, and adsorption capacity decreased as temperature increased from 10 to 40 degrees C. No significant influence of pH on adsorption was observed at pH 3 to 9; however, adsorption capacity decreased dramatically from pH 9 to 13. PMID:21516989

  6. Carbon dioxide capture using polyethylenimine-loaded mesoporous carbons.

    PubMed

    Wang, Jitong; Chen, Huichao; Zhou, Huanhuan; Liu, Xiaojun; Qiao, Wenming; Long, Donghui; Ling, Licheng

    2013-01-01

    A high efficiency sorbent for CO2 capture was developed by loading polyethylenimine (PEI) on mesoporous carbons which possessed well-developed mesoporous structures and large pore volume. The physicochemical properties of the sorbent were characterized by N2 adsorption/desorption, scanning electron microscopy (SEM), thermal gravimetric analysis (TG) and Fourier transform infrared spectroscopy (FT-IR) techniques followed by testing for CO2 capture. Factors that affected the sorption capacity of the sorbent were studied. The sorbent exhibited extraordinary capture capacity with CO2 concentration ranging from 5% to 80%. The optimal PEI loading was determined to be 65 wt.% with a CO2 sorption capacity of 4.82 mmol-CO2/g-sorbent in 15% CO2/N2 at 75 degrees C, owing to low mass-transfer resistance and a high utilization ratio of the amine compound (63%). Moisture had a promoting effect on the sorption separation of CO2. In addition, the developed sorbent could be regenerated easily at 100 degrees C, and it exhibited excellent regenerability and stability. These results indicate that this PEI-loaded mesoporous carbon sorbent should have a good potential for CO2 capture in the future. PMID:23586307

  7. Catalytic upgrading of xylan over mesoporous Y catalyst.

    PubMed

    Kim, Seong-Soo; Jun, Bo Ram; Park, Sung Hoon; Jeon, Jong-Ki; Suh, Dong Jin; Kim, Tae-Wan; Park, Young-Kwon

    2014-04-01

    In-situ catalytic cracking of xylan, a model compound of hemicellulose, was carried out using pyrolysis-gas chromatography/mass spectrometry over mesoporous Y for the first time. Experiments were conducted at three different temperatures, 400 degrees C, 450 degrees C, and 500 degrees C, to investigate the effect of reaction temperature. Three different biomass-to-catalyst ratios, 1:1, 1:2, and 1:3, were tested at 500 degrees C to examine the effect of catalyst dose. In addition, the catalytic activity of mesoporous Y was compared with that of Al-MCM-41. The catalysts used were characterized by N2 adsorption-desorption, temperature programmed desorption of NH3, and X-ray diffraction. The main pyrolysis products of xylan were acids, hydrocarbons, phenolics, oxygenates, aromatics, and polycyclic aromatic hydrocarbons. Mesoporous Y, which has acid sites with larger quantity and stronger acidity than those of Al-MCM-41, was shown to enhance the quality of bio-oil to a larger extent, producing a larger quantity of high-value-added products, such as aromatics and furans. PMID:24734712

  8. Study of carbon monoxide oxidation on mesoporous platinum.

    PubMed

    Esterle, Thomas F; Russell, Andrea E; Bartlett, Philip N

    2010-09-10

    H(1) mesoporous platinum surfaces formed by electrodeposition from lyotropic liquid crystalline templates have high electroactive surface areas (up to 60 m(2) g(-1)) provided by the concave surface within their narrow (≈2 nm diameter) pores. In this respect, they are fundamentally different from the flat surfaces of ordinary Pt electrodes or the convex surfaces of high-surface-area Pt nanoparticles. Cyclic voltammetry of H(1) mesoporous Pt films in acid solution is identical to that for polycrystalline Pt, suggesting that the surfaces of the pores are made up of low-index Pt faces. In contrast, CO stripping voltammetry on H(1) mesoporous Pt is significantly different from the corresponding voltammetry on polycrystalline Pt and shows a clear prewave for CO oxidation and the oxidation CO at lower overpotential. These differences in CO stripping are related to the presence of trough sites where the low-index Pt faces that make up the concave surface of the pore walls meet. PMID:20578119

  9. Evaluation of thermoporometry for characterization of mesoporous materials.

    PubMed

    Yamamoto, Takuji; Endo, Akira; Inagi, Yuki; Ohmori, Takao; Nakaiwa, Masaru

    2005-04-15

    The accuracy of thermoporometry (TPM) in terms of the characterization of SBA-15 is examined based on a model that classifies the water in the mesopores into two different types: freezable pore water, which can form cylindrical ice crystals, and nonfreezable pore water, which cannot undergo a phase transition during a differential scanning calorimetry (DSC) measurement. Applying the empirical relationship between the sizes of the ice crystals formed in the mesopores and the solidification temperature of the freezable pore water to a thermogram (a recording of the heat flux during the solidification of the freezable pore water) yielded a size distribution of the ice crystals. The size of the ice crystals increased slightly with repetitive freezing, indicating that the mesopores were enlarged by formation of the ice crystals. Adding the thickness, t(nf), of the nonfreezable pore water layer to the ice crystal-size distribution calculated from the thermogram allowed for the determination of the porous properties of SBA-15. The porous properties attained from TPM experiments were compared with the results attained through the combination of Ar gas adsorption experiments and nonlocal density functional theory (NLDFT) analysis. The porous properties determined by TPM were confirmed to be quite sensitive to the t(nf) value. PMID:15780301

  10. Aerosol-spray diverse mesoporous metal oxides from metal nitrates.

    PubMed

    Kuai, Long; Wang, Junxin; Ming, Tian; Fang, Caihong; Sun, Zhenhua; Geng, Baoyou; Wang, Jianfang

    2015-01-01

    Transition metal oxides are widely used in solar cells, batteries, transistors, memories, transparent conductive electrodes, photocatalysts, gas sensors, supercapacitors, and smart windows. In many of these applications, large surface areas and pore volumes can enhance molecular adsorption, facilitate ion transfer, and increase interfacial areas; the formation of complex oxides (mixed, doped, multimetallic oxides and oxide-based hybrids) can alter electronic band structures, modify/enhance charge carrier concentrations/separation, and introduce desired functionalities. A general synthetic approach to diverse mesoporous metal oxides is therefore very attractive. Here we describe a powerful aerosol-spray method for synthesizing various mesoporous metal oxides from low-cost nitrate salts. During spray, thermal heating of precursor droplets drives solvent evaporation and induces surfactant-directed formation of mesostructures, nitrate decomposition and oxide cross-linking. Thirteen types of monometallic oxides and four groups of complex ones are successfully produced, with mesoporous iron oxide microspheres demonstrated for photocatalytic oxygen evolution and gas sensing with superior performances. PMID:25897988

  11. Functionalized mesoporous silica nanoparticles for oral delivery of budesonide

    SciTech Connect

    Yoncheva, K.; Popova, M.; Szegedi, A.; Mihaly, J.; Tzankov, B.; Lambov, N.; Konstantinov, S.; Tzankova, V.; Pessina, F.; Valoti, M.

    2014-03-15

    Non-functionalized and amino-functionalized mesoporous silica nanoparticle were loaded with anti-inflammatory drug budesonide and additionally post-coated with bioadhesive polymer (carbopol). TEM images showed spherical shape of the nanoparticles and slightly higher polydispersity after coating with carbopol. Nitrogen physisorption and thermogravimetic analysis revealed that more efficient loading and incorporation into the pores of nanoparticles was achieved with the amino-functionalized silica carrier. Infrared spectra indicated that the post-coating of these nanoparticles with carbopol led to the formation of bond between amino groups of the functionalized carrier and carboxyl groups of carbopol. The combination of amino-functionalization of the carrier with the post-coating of the nanoparticles sustained budesonide release. Further, an in vitro model of inflammatory bowel disease showed that the cytoprotective effect of budesonide loaded in the post-coated silica nanoparticles on damaged HT-29 cells was more pronounced compared to the cytoprotection obtained with pure budesonide. -- Graphical abstract: Silica mesoporous MCM-41 particles were amino-functionalized, loaded with budesonide and post-coated with bioadhesive polymer (carbopol) in order to achieve prolonged residence of anti-inflammatory drug in GIT. Highlights: • Higher drug loading in amino-functionalized mesoporous silica. • Amino-functionalization and post-coating of the nanoparticles sustained drug release. • Achievement of higher cytoprotective effect with drug loaded into the nanoparticles.

  12. Adsorption behavior of natural anthocyanin dye on mesoporous silica

    NASA Astrophysics Data System (ADS)

    Kohno, Yoshiumi; Haga, Eriko; Yoda, Keiko; Shibata, Masashi; Fukuhara, Choji; Tomita, Yasumasa; Maeda, Yasuhisa; Kobayashi, Kenkichiro

    2014-01-01

    Because of its non-toxicity, naturally occurring anthocyanin is potentially suitable as a colorant for foods and cosmetics. To the wider use of the anthocyanin, the immobilization on the inorganic host for an easy handling as well as the improvement of the stability is required. This study is focused on the adsorption of significant amount of the natural anthocyanin dye onto mesoporous silica, and on the stability enhancement of the anthocyanin by the complexation. The anthocyanin has successfully been adsorbed on the HMS type mesoporous silica containing small amount of aluminum. The amount of the adsorbed anthocyanin has been increased by modifying the pore wall with n-propyl group to make the silica surface hydrophobic. The light fastness of the adsorbed anthocyanin has been improved by making the composite with the HMS samples containing aluminum, although the degree of the improvement is not so large. It has been proposed that incorporation of the anthocyanin molecule deep inside the mesopore is required for the further enhancement of the stability.

  13. Nucleation Pathways of CO2 Condensation under Mesoporous Templated Glass

    NASA Astrophysics Data System (ADS)

    Wang, Bo; Byran, Matthew S.; Warren, Garfield T.; Sokol, Paul E.; Indiana University Team; NIST Collaboration

    2015-03-01

    Carbon capture and storage (CCS) are important elements in reducing greenhouse gas emission and combating global warming. The adsorption behavior of CO2 under mesoporous confinement at room temperature is particularly relevant. , Small Angle Scattering of X-ray (SAXS) and Neutron (SANS) were used to probe the adsorption process of CO2 under such mesoporous confinement MCM-41 and details of nucleation pathways were mapped out by fitting the scattering intensities with adsorption models. From both experiments, the nucleation of CO2 on the inner pore surface of MCM-41 is found to be a two-step process; high density liquid phase CO2 first forms uniform layers following the long range translational symmetry of the porous matrix, above one CO2 filling, determined by the pore size and temperature, capillary condensation initiates. The nucleation sites formed during capillary condensation start to separate the long range symmetry from the one at uniform layers. Finally, SAXS and SANS techniques are compared and they both showed their unique properties of probing the filling-dependent structures of adsorbed CO2 under such mesoporous system.

  14. Soft-Template-Synthesized Mesoporous Carbon for Oral Drug Delivery

    SciTech Connect

    Saha, Dipendu; Warren, Kaitlyn E; Naskar, Amit K

    2014-01-01

    Template-synthesized mesoporous carbons were successfully used in in vitro investigations of controlled delivery of three model drugs, captopril, furosemide, and ranitidine hydrochloride. Captopril and furosemide exhibited desorption kinetics over 30 40 h, and ranitidine HCl had a complete release time of 5 10 h. As evident from the slow release kinetics, we contend that our mesoporous carbon is an improved drug-delivery medium compared to state-of-the-art porous silica-based substrates. The mesoporous carbons, synthesized from phloroglucinol and lignin, a synthetic and a sustainable precursor, respectively, exhibit BET surface area of 200 400 m2 g-1 and pore volume of 0.2 0.6 cm3 g-1. The phloroglucinol-based carbon has narrower pore widths and higher pore volume than the lignin-derived counterpart and maintains a longer release time. Numerical modeling of the release kinetics data reveals that the diffusivities of all the drugs from lignin-based carbon media are of equivalent magnitude (10-22 to 10-24 m2 s-1). However, a tailored reduction of pore width in the sorbent reduces the diffusivity of smaller drug molecules (captopril) by an order of magnitude. Thus, engineered pore morphology in our synthesized carbon sorbent, along with its potential to tailor the chemistry of its interaction with sorbet, can be exploited for optimal delivery system of a preferred drug within its therapeutic level and below the level of toxicity.

  15. Biomolecule-assisted route to prepare titania mesoporous hollow structures.

    PubMed

    Ding, Shangjun; Wang, Yaoming; Hong, Zhanglian; Lü, Xujie; Wan, Dongyun; Huang, Fuqiang

    2011-10-01

    Amino acids, as a particularly important type of biomolecules, have been used as multifunctional templates to intelligently construct mesoporous TiO(2) hollow structures through a simple solvothermal reaction. The structure-directing behaviors of various amino acids were systematically investigated, and it was found that these biomolecules possess the general capability to assist mesoporous TiO(2) hollow-sphere formation. At the same time, the nanostructures of the obtained TiO(2) are highly dependent on the isoelectric points (pI) of amino acids. Their molecular-structure variations can lead to pI differences and significantly influence the final TiO(2) morphologies. Higher-pI amino acids (e.g., L-lysine and L-arginine) have better structure-directing abilities to generate nanosheet-assembled hollow spheres and yolk/shell structures. The specific morphologies and mesopore size of these novel hollow structures can also be tuned by adjusting the titanium precursor concentration. Heat treatment in air and vacuum was further conducted to transform the as-prepared structures to porous nanoparticle-assembled hollow TiO(2) and TiO(2)/carbon nanocomposites, which may be potentially applied in the fields of photocatalysts, dye-sensitized solar cells, and Li batteries. This study provides some enlightenment on the design of novel templates by taking advantage of biomolecules. PMID:21882272

  16. Nanoparticles based laser-induced surface structures formation on mesoporous silicon by picosecond laser beam interaction

    NASA Astrophysics Data System (ADS)

    Talbi, A.; Petit, A.; Melhem, A.; Stolz, A.; Boulmer-Leborgne, C.; Gautier, G.; Defforge, T.; Semmar, N.

    2016-06-01

    In this study, laser induced periodic surface structures were formed on mesoporous silicon by irradiation of Nd:YAG picosecond pulsed laser beam at 266 nm wavelength at 1 Hz repetition rate and with 42 ps pulse duration. The effects of laser processing parameters as laser beam fluence and laser pulse number on the formation of ripples were investigated. Scanning electron microscopy and atomic force microscopy were used to image the surface morphologies and the cross section of samples after laser irradiation. At relatively low fluence ∼20 mJ/cm2, ripples with period close to the laser beam wavelength (266 nm) and with an always controlled orientation (perpendicular to the polarization of ps laser beam) appeared after a large laser pulse number of 12,000. It has been found that an initial random distribution of SiOx nanoparticles is periodically structured with an increase of the laser pulse number. Finally, it is experimentally demonstrated that we formed a 100 nm liquid phase under the protusion zones including the pores in the picosecond regime.

  17. Silica-based mesoporous nanobiomaterials as promoter of bone regeneration process.

    PubMed

    Shadjou, Nasrin; Hasanzadeh, Mohammad

    2015-11-01

    Silica-based mesostructured nanomaterials have emerged as a full family of biomaterials with tremendous potential to address the requirements for the bone regeneration process. This review focuses on more recent advances in bone regeneration process based on silica-based mesoporous biomaterials during 2012 to January 2015. In this review, we describe application of silica-based mesoporous mesostructured nanomaterials (possessing pore sizes in the range 2-50 nm) for the bone regeneration process. We summarize the preparation methods, the effect of mesopore templates and composition on the mesopore-structure characteristics, and different forms of these materials, including particles, fibers, spheres, scaffolds, and composites. The effect of structural and textural properties of mesoporous materials on the development of new biomaterials for treatment of different bone pathologies such as infection, osteoporosis, cancer, and so forth is discussed. In addition, silica-based mesoporous bioactive glass, as a potential drug/growth factor carrier, is reviewed, which includes the composition-structure-drug delivery relationship and the functional effect on the antibacteria and tissue-stimulation properties. Also, application of different mesoporous materials on construction of 3D macroporous scaffolds for bone tissue engineering was disused. Finally, this review discusses the possibility of covalently grafting different osteoinductive agents to the silica-based mesoporous scaffold surface that act as attracting signals for bone cells to promote the bone regeneration process. PMID:26011776

  18. A reconstruction strategy to synthesize mesoporous SAPO molecular sieve single crystals with high MTO catalytic activity.

    PubMed

    Wang, Chan; Yang, Miao; Li, Mingrun; Xu, Shutao; Yang, Yue; Tian, Peng; Liu, Zhongmin

    2016-05-11

    Mesoporous SAPO-34 single crystals with tunable porosity and Si content have been fast synthesized within 4 hours by a reconstruction strategy, which show excellent hydrothermal stability and MTO catalytic activity. This new strategy is further proven to be applicable to prepare other mesoporous SAPO molecular sieve single crystals. PMID:27101359

  19. Synthesis of organic-inorganic hybrid mesoporous tin oxophosphate in the presence of anionic surfactant.

    PubMed

    Mal, Nawal Kishor; Fujiwara, Masahiro; Matsukata, Masahiko

    2005-11-01

    Synthesis of novel mesoporous hybrid tin oxophosphate is reported from phenylphosphonic acid as the only precursor of phosphorus in the presence of anionic surfactant (SDS), which possesses a wormhole mesoporous structure and is stable even after calcination at 550 degrees C. PMID:16228034

  20. Surfactant-free synthesis of mesoporous and hollow silica nanoparticles with an inorganic template.

    PubMed

    Baù, Luca; Bártová, Barbora; Arduini, Maria; Mancin, Fabrizio

    2009-12-28

    A surfactant-free synthesis of mesoporous and hollow silica nanoparticles is reported in which boron acts as the templating agent. Using such a simple and mild procedure as a treatment with water, the boron-rich phase is selectively removed, affording mesoporous pure silica nanoparticles with wormhole-like pores or, depending on the synthetic conditions, silica nanoshells. PMID:20024287

  1. Studies on Supercapacitor Electrode Material from Activated Lignin-Derived Mesoporous Carbon

    SciTech Connect

    Saha, Dipendu; Li, Yunchao; Bi, Zhonghe; Chen, Jihua; Keum, Jong Kahk; Hensley, Dale K; Grappe, Hippolyte A.; Meyer III, Harry M; Dai, Sheng; Paranthaman, Mariappan Parans; Naskar, Amit K

    2014-01-01

    We synthesized mesoporous carbon from pre-cross-linked lignin gel impregnated with a surfactant as the pore-forming agent, and then activated the carbon through physical and chemical methods to obtain activated mesoporous carbon. The activated mesoporous carbons exhibited 1.5- to 6-fold increases in porosity with a maximum BET specific surface area of 1148 m2/g and a pore volume of 1.0 cm3/g. Slow physical activation helped retain dominant mesoporosity; however, aggressive chemical activation caused some loss of the mesopore volume fraction. Plots of cyclic voltammetric data with the capacitor electrode made from these carbons showed an almost rectangular curve depicting the behavior of ideal double-layer capacitance. Although the pristine mesoporous carbon exhibited the same range of surface-area-based capacitance as that of other known carbon-based supercapacitors, activation decreased the surface-area-based specific capacitance and increased the gravimetric-specific capacitance of the mesoporous carbons. Surface activation lowered bulk density and electrical conductivity. Warburg impedance as a vertical tail in the lower frequency domain of Nyquist plots supported good supercapacitor behavior for the activated mesoporous carbons. Our work demonstrated that biomass-derived mesoporous carbon materials continue to show potential for use in specific electrochemical applications.

  2. A bio-catalytically driven Janus mesoporous silica cluster motor with magnetic guidance.

    PubMed

    Ma, Xing; Sanchez, Samuel

    2015-03-28

    A bio-catalytic Janus motor based on the mesoporous silica cluster (JMSC) is fabricated. Chemically conjugated catalase triggers the decomposition of H2O2 to produce driving force by bubble propulsion, while a metallic (Ni) coating layer allows for magnetic guidance of the motor. The JMSC motor can act as a delivery vehicle with cargo loading inside its mesopores. PMID:25407318

  3. Ionic liquid decorated mesoporous silica nanoparticles: a new high-performance hybrid electrolyte for lithium batteries.

    PubMed

    Li, Yang; Wong, Ka-Wai; Ng, Ka-Ming

    2016-03-10

    We report a novel hybrid electrolyte based on mesoporous silica nanoparticles decorated with an ionic liquid, which exhibits a superior lithium ion transference number of >0.8, and an excellent electrochemical window of >5 V with attractive ionic conductivity. The insights obtained pave a new way for the preparation of high-performance electrolytes with mesoporous structures. PMID:26926805

  4. Hydrothermal synthesis of mesoporous metal oxide arrays with enhanced properties for electrochemical energy storage

    SciTech Connect

    Xiao, Anguo Zhou, Shibiao; Zuo, Chenggang; Zhuan, Yongbing; Ding, Xiang

    2015-01-15

    Highlights: • NiO mesoporous nanowall arrays are prepared via hydrothermal method. • Mesoporous nanowall arrays are favorable for fast ion/electron transfer. • NiO mesoporous nanowall arrays show good supercapacitor performance. - Abstract: Mesoporous nanowall NiO arrays are prepared by a facile hydrothermal synthesis method with a following annealing process. The NiO nanowall shows continuous mesopores ranging from 5 to 10 nm and grows vertically on the substrate forming a porous net-like structure with macropores of 20–300 nm. A plausible mechanism is proposed for the growth of mesoporous nanowall NiO arrays. As cathode material of pseudocapacitors, the as-prepared mesoporous nanowall NiO arrays show good pseudocapacitive performances with a high capacitance of 600 F g{sup −1} at 2 A g{sup −1} and impressive high-rate capability with a specific capacitance of 338 F g{sup −1} at 40 A g{sup −1}. In addition, the mesoporous nanowall NiO arrays possess good cycling stability. After 6000 cycles at 2 A g{sup −1}, a high capacitance of 660 F g{sup −1} is attained, and no obvious degradation is observed. The good electrochemical performance is attributed to its highly porous morphology, which provides large reaction surface and short ion diffusion paths, leading to enhanced electrochemical properties.

  5. A facile route to synthesize endurable mesopore containing ZSM-5 catalyst for methanol to propylene reaction.

    PubMed

    Sun, Chao; Du, Junming; Liu, Jian; Yang, Yisu; Ren, Nan; Shen, Wei; Xu, Hualong; Tang, Yi

    2010-04-21

    A novel route is proposed for the preparation of mesopore containing zeolite ZSM-5 via in situ hydrothermal treatment of a solution containing alkali-dissolved SBA-15 containing carbonized surfactant P123 in the mesopores; it exhibited prominent stability enhancement for methanol to propylene reaction. PMID:20461876

  6. Ultrasound assisted morphological control of mesoporous silica with improved lysozyme adsorption.

    PubMed

    Sun, Shumin; Wang, Shen; Wang, Peiyuan; Wu, Qiong; Fang, Shaoming

    2015-03-01

    The morphological control of mesoporous silica without any additives has attracted much attention. Discrete rod-like and string-of-beads like mesoporous SBA-15 can be achieved under ultrasound irradiation without changing the composition of synthesis system. The smaller particles of SBA-15 showed improved lysozyme immobilization capacity and higher adsorption rate over conventional rope-like SBA-15. PMID:25150609

  7. Facile preparation of mesoporous carbon-silica-coated graphene for the selective enrichment of endogenous peptides.

    PubMed

    Zhang, Quanqing; Zhang, Qinghe; Xiong, Zhichao; Wan, Hao; Chen, Xiaoting; Li, Hongmei; Zou, Hanfa

    2016-01-01

    A sandwich-like composite composed of ordered mesoporous carbon-silica shell-coated graphene (denoted as graphene@mSiO2-C) was prepared by an in-situ carbonation strategy. A mesoporous silica shell was synthesized by a sol-gel method, and cetyltrimethyl ammonium bromide inside the mesopores were in-situ carbonized as a carbon source to obtain a carbon-silica shell. The resulting mesoporous carbon-silica material with a sandwich structure possesses a high surface area (600 m(2) g(-1)), large pore volume (0.587 cm(3) g(-1)), highly ordered mesoporous pore (3 nm), and high carbon content (30%). This material shows not only high hydrophobicity of graphene and mesoporous carbon but also a hydrophilic silica framework that ensures excellent dispersibility in aqueous solution. The material can capture many more peptides from bovine serum albumin tryptic digests than mesoporous silica shell-coated graphene, demonstrating great enrichment efficiency for peptides. Furthermore, the prepared composite was applied to the enrichment of low-abundance endogenous peptides in human serum. Based on Matrix-Assisted Laser Desorption/ Ionization Time of Flight Mass Spectrometry identification, the graphene@mSiO2-C could efficiently size-exclude proteins and enriches the low-abundant peptides on the graphene and mesoporous carbon. And based on the LC-MS/MS results, 892 endogenous peptides were obtained by graphene@mSiO2-C, hinting at its great potential in peptides analysis. PMID:26695263

  8. Mesoporous hexagonal Co3O4 for high performance lithium ion batteries

    PubMed Central

    Su, Dawei; Xie, Xiuqiang; Munroe, Paul; Dou, Shixue; Wang, Guoxiu

    2014-01-01

    Mesoporous Co3O4 nanoplates were successfully prepared by the conversion of hexagonal β-Co(OH)2 nanoplates. TEM, HRTEM and N2 sorption analysis confirmed the facet crystal structure and inner mesoporous architecture. When applied as anode materials for lithium storage in lithium ion batteries, mesoporous Co3O4 nanocrystals delivered a high specific capacity. At 10 C current rate, as-prepared mesoporous Co3O4 nanoplates delivered a specific capacity of 1203 mAh/g at first cycle and after 200 cycles it can still maintain a satisfied value (330 mAh/g). From ex-situ TEM, SAED and FESEM observation, it was found that mesoporous Co3O4 nanoplates were reduced to Li2O and Co during the discharge process and re-oxidised without losing the mesoporous structure during charge process. Even after 100 cycles, mesoporous Co3O4 crystals still preserved their pristine hexagonal shape and mesoporous nanostructure. PMID:25283174

  9. Effect of Nickel Contents on the Microstructure of Mesoporous Nickel Gadolinium-Doped Ceria

    NASA Astrophysics Data System (ADS)

    Ahn, Seunghyun; Koo, Hyun; Bae, Sung-Hwan; Park, Chan; Cho, Guyoung; Chang, Ikwhang; Cha, Suk-Won; Yoo, Young-Sung

    2013-12-01

    The effect of NiO contents on the microstructure of mesoporous NiO-Gd0.25Ce0.75O2-x (NiO-GDC) composite for intermediate temperature solid oxide fuel cells (IT-SOFC) was investigated. Mesoporous NiO-GDC powders with different NiO contents were synthesized by self-assembly hydrothermal method using tri-block copolymer, Pluronic F127, as a structure directing agent. Grain growth/agglomeration behaviors of NiO particles and changes of mesoporous structure of GDC particles were characterized by microstructural analyses. NiO-GDC powders were composed of GDC nano particles with ordered mesopore inside the particles and octahedral NiO grains with truncated-edges. As the amount of NiO increases, specific area value of mesoporous NiO-GDC was decreased, and the agglomeration/growth behavior of NiO grains was accelerated.

  10. Mesoporous hybrids containing Eu 3+ complexes covalently bonded to SBA-15 functionalized: Assembly, characterization and photoluminescence

    NASA Astrophysics Data System (ADS)

    Li Kong, Li; Yan, Bing; Li, Ying

    2009-07-01

    A novel series of luminescent mesoporous organic-inorganic hybrid materials has been prepared by linking Eu 3+ complexes to the functionalized ordered mesoporous SBA-15 which was synthesis by a co-condensation process of 1,3-diphenyl-1,3-propanepione (DBM) modified by the coupling agent 3-(triethoxysilyl)-propyl isocyanate (TEPIC), tetraethoxysilane (TEOS), Pluronic P123 surfactant as a template. It was demonstrated that the efficient intramolecular energy transfer in the mesoporous material Eu(DBMSi-SBA-15) 3phen mainly occurred between the modified DBM (named as DBM-Si) and the central Eu 3+ ion. So the Eu(DBMSi-SBA-15) 3phen showed characteristic emission of Eu 3+ ion under UV irradiation with higher luminescence quantum efficiency. Moreover, the mesoporous hybrid materials exhibited excellent thermal stability as the lanthanide complex was covalently bonded to the mesoporous matrix.

  11. Mesoporous metal oxide microsphere electrode compositions and their methods of making

    DOEpatents

    Parans Paranthaman, Mariappan; Bi, Zhonghe; Bridges, Craig A; Brown, Gilbert M

    2014-12-16

    Compositions and methods of making are provided for treated mesoporous metal oxide microspheres electrodes. The compositions comprise (a) microspheres with an average diameter between 200 nanometers (nm) and 10 micrometers (.mu.m); (b) mesopores on the surface and interior of the microspheres, wherein the mesopores have an average diameter between 1 nm and 50 nm and the microspheres have a surface area between 50 m.sup.2/g and 500 m.sup.2/g, and wherein the composition has an electrical conductivity of at least 1.times.10.sup.-7 S/cm at 25.degree. C. and 60 MPa. The methods of making comprise forming a mesoporous metal oxide microsphere composition and treating the mesoporous metal oxide microspheres by at least one method selected from the group consisting of: (i) annealing in a reducing atmosphere, (ii) doping with an aliovalent element, and (iii) coating with a coating composition.

  12. Preparation of TiO2 nanotubes/mesoporous calcium silicate composites with controllable drug release.

    PubMed

    Xie, Chunling; Li, Ping; Liu, Yan; Luo, Fei; Xiao, Xiufeng

    2016-10-01

    Nanotube structures such as TiO2 nanotube (TNT) arrays produced by self-ordering electrochemical anodization have been extensively explored for drug delivery applications. In this study, we presented a new implantable drug delivery system that combined mesoporous calcium silicate coating with nanotube structures to achieve a controllable drug release of water soluble and antiphlogistic drug loxoprofen sodium. The results showed that the TiO2 nanotubes/mesoporous calcium silicate composites were successfully fabricated by a simple template method and the deposition of mesoporous calcium silicate increased with the soaking time. Moreover, the rate of deposition of biological mesoporous calcium silicate on amorphous TNTs was better than that on anatase TNTs. Further, zinc-incorporated mesoporous calcium silicate coating, produced by adding a certain concentration of zinc nitrate into the soaking system, displayed improved chemical stability. A significant improvement in the drug release characteristics with reduced burst release and sustained release was demonstrated. PMID:27287140

  13. Synthesis of highly-ordered mesoporous carbon/silica nanocomposites and derivative hierarchically mesoporous carbon from a phenyl-bridged organosiloxane

    NASA Astrophysics Data System (ADS)

    Wu, Zhiwang; Pang, Jiebin; Lu, Yunfeng

    2009-11-01

    Mesoporous carbon/silica nanocomposites and derivative hierarchically mesoporous carbon have been prepared using 1,4-bis(triethoxysilyl)benzene (BTEB) as a precursor for a carbon/silica network and Pluronic P123 (HO(CH2CH2O)20(CH2CH(CH3)O)70(CH2CH2O)20H) as a template for highly-ordered hexagonal pores. Co-assembly of BTEB and P123 and subsequent carbonization results in a mesoporous carbon/silica nanocomposite with hexagonally oriented pores. Removal of the silica component in the carbon/silica network creates a second porosity in the network and results in hierarchically mesoporous carbon. The mesostructure of these materials was characterized by transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM), powder X-ray diffraction (PXRD), and N2 sorption.

  14. Bimodal mesoporous carbon synthesized from large organic precursor and amphiphilic tri-block copolymer by self assembly

    SciTech Connect

    Saha, Dipendu; Contescu, Cristian I; Gallego, Nidia C

    2012-01-01

    Owing to several disadvantages of traditional hard template based synthesis, soft-template or self-assembly was adopted to synthesize mesoporous carbon. In this work, we have introduced hexaphenol as a new and large organic precursor for the synthesis of mesoporous carbon by self-assembly with pluronic P123 as structure dictating agent. The resultant mesoporous carbon is bimodal in nature with median pore widths of 29 and 45 and BET surface area of 312 m2/g. Unlike previously synthesized mesoporous carbon, this carbon possesses negligible micropore volume. This mesoporous carbon is very suitable candidate for several applications including membrane separation, chemical sensor or selective sorption of larger molecules.

  15. Nano-hard template synthesis of pure mesoporous NiO and its application for streptavidin protein immobilization.

    PubMed

    Wahab, Mohammad A; Darain, Farzana

    2014-04-25

    A simple and efficient immobilization of streptavidin protein (with hexa-histidine tag) onto the surface of mesoporous NiO is described. Before immobilization of streptavidin protein (with hexa-histidine tag) onto the surface of mesoporous NiO, we first synthesized well-organized mesoporous NiO by a nanocasting method using mesoporous silica SBA-15 as the hard template. Then, the well-organized mesoporous NiO particles were characterized by small angle x-ray diffraction (XRD), wide angle XRD, nitrogen adsorption/desorption, and transmission electron microscopy (TEM). TEM and small angle XRD suggested the formation of mesoporous NiO materials, whereas the wide angle XRD pattern of mesoporous NiO indicated that the nickel precursor had been transformed into crystalline NiO. The N2 sorption experiments demonstrated that the mesoporous NiO particles had a high surface area of 281 m2 g(-1), a pore volume of 0.51 cm3 g(-1) and a pore size of 4.8 nm. Next, the immobilization of streptavidin protein (with hexa-histidine tag) onto the surface of mesoporous NiO was studied. Detailed analysis using gel electrophoresis confirmed that this approach can efficiently bind his-tagged streptavidin onto the surface of mesoporous NiO material since the mesoporous NiO provides sufficient surface sites for the binding of streptavidin via non-covalent ligand binding with the histidine tag. PMID:24670980

  16. Samarium-doped mesoporous TiO2 nanoparticles with improved photocatalytic performance for elimination of gaseous organic pollutants

    NASA Astrophysics Data System (ADS)

    Tang, Jianting; Chen, Xiaomiao; Liu, Yu; Gong, Wei; Peng, Zhenshan; Cai, Tiejun; Luo, Lianjing; Deng, Qian

    2013-01-01

    Mesoporous TiO2 doped with different amounts of Sm were prepared via a sol-gel route with Pluronic P123 as template. The materials were characterized by X-ray diffraction, transmission electron microscopy, and N2 sorption experiments, etc. The photocatalytic activity of the mesoporous TiO2 was tested in elimination of gaseous methanol and acetone. The Sm doped mesoporous TiO2 have higher activity than those of the commercial photocatalyst (Degussa, P25) and Sm doped TiO2 counterparts without mesopore structure under ultraviolet light irradiation. A possible mechanism was proposed to account for the high photocatalytic activity of the Sm doped mesoporous TiO2. The superior activity of the Sm doped mesoporous TiO2 may be attributed to the synergic effect of the high surface area, mesopore structure and doped Sm species.

  17. Cobalt oxide and nitride particles supported on mesoporous carbons as composite electrocatalysts for dye-sensitized solar cells

    NASA Astrophysics Data System (ADS)

    Chen, Ming; Shao, Leng-Leng; Gao, Ze-Min; Ren, Tie-Zhen; Yuan, Zhong-Yong

    2015-07-01

    The composite electrocatalysts of cobalt oxide/mesoporous carbon and cobalt nitride/mesoporous carbon are synthesized via a convenient oxidation and subsequent ammonia nitridation of cobalt particles-incorporated mesoporous carbon, respectively. The cobalt oxide and nitride particles are uniformly imbedded in mesoporous carbon matrix, forming the unique composites with high surface area and mesopore architecture, and the resultant composites are evaluated as counter electrode materials, exhibiting good catalytic activity for the reduction of triiodide. The composites of cobalt nitride and mesoporous carbon are superior to the counterparts of cobalt oxide and mesoporous carbon in catalyzing the triiodide reduction, and the dye-sensitized solar cell with the composites achieves an optimum power conversion efficiency of 5.26%, which is comparable to the one based on the conventional Pt counter electrode (4.88%).

  18. DEVELOPMENT OF MESOPOROUS MEMBRANE MATERIALS FOR CO2 SEPARATION

    SciTech Connect

    Wei-Heng Shih; Tejas Patil; Qiang Zhao

    2003-03-25

    The huge emissions of carbon dioxide from fossil fuel fired power plants and industrial plants over the last century have resulted in an increase of the atmospheric carbon dioxide concentration. Climatological modeling work has predicted severe climate disruption as a result of the trapping of heat due to CO{sub 2}. As an attempt to address this global warming effect, DOE has initiated the Vision 21 concept for future power plants. We first synthesized mesoporous aluminosilicates that have high surface area and parallel pore channels for membrane support materials. Later we synthesized microporous aluminosilicates as the potential thin membrane materials for selective CO{sub 2} adsorption. The pore size is controlled to be less that 1 nm so that the adsorption of CO{sub 2} on the pore wall will block the passage of N{sub 2}. Mesoporous and precipitated alumina were synthesized as the base material for CO{sub 2} adsorbent. The porous alumina is doped with Ba to enhance its CO{sub 2} affinity due to the basicity of Ba. It is shown by gas chromatograph (GC) that the addition of Ba enhances the separation CO{sub 2} from N{sub 2}. It was found that mesoporous alumina has larger specific surface area and better selectivity of CO{sub 2} than precipitated alumina. Ba improves the affinity of mesoporous alumina with CO{sub 2}. Phase may play an important role in selective adsorption of CO{sub 2}. It is speculated that mesoporous alumina is more reactive than precipitated alumina creating the xBaO {center_dot}Al{sub 2}O{sub 3} phase that may be more affinitive to CO{sub 2} than N{sub 2}. On the other hand, the barium aluminates phase (Ba{sub 3}Al{sub 2}O{sub 6}) in the mesoporous sample does not help the adsorption of CO{sub 2}. Microporous aluminosilicate was chosen as a suitable candidate for CO{sub 2}/N{sub 2} separation because the pore size is less than 10 {angstrom}. If a CO{sub 2} adsorbent is added to the microporous silica, the adsorption of CO{sub 2} can block the

  19. Silver nanoparticles incorporated onto ordered mesoporous silica from Tollen's reagent

    NASA Astrophysics Data System (ADS)

    Zienkiewicz-Strzałka, M.; Pasieczna-Patkowska, S.; Kozak, M.; Pikus, S.

    2013-02-01

    Noble metal nanostructures supported on mesoporous silica are bridge between traditional silica adsorbents and modern catalysts. In this work the Ag/SBA-15 mesoporous materials were synthesized and characterized. Various forms of nanosilver supported on ordered mesoporous template have been successfully obtained via proposed procedures. In all synthesized materials, Tollen's reagent (diammine silver complex [Ag(NH3)2]+) was used as a silver source. Silver nanoparticles were prepared by reduction of ammoniacal silver complex by formaldehyde in the solution of stabilizer. After reduction, Ag nanoparticles could be deposited on SBA-15, or added during traditional synthesis of SBA-15 giving silver or silver chloride nanoparticles in the combination with porous silica. Silver nanostructures as nanoparticles or nanowires were also embedded onto the SBA-15 by incipient wetness impregnation of silver ions. Absorbed silver ions were next reduced under hydrogen at high temperature. There are many advantages of utilized ammoniacal silver complex as a silver source. Proposed method is capable to synthesis of various metal nanostructures with controlled composition and morphology. The silver ammonia complex is composed of two ions surrounding and protecting the central silver ion, so it is possible to obtain very small nanoparticles using simple approach without any functionalization of external and internal surface of SBA-15. This approach allows obtaining greatly small silver nanoparticles on SBA-15 (4 nm) or nanowires depending on the metal loading amount. Moreover, the colloidal silver solution prepared from Tollen's reagent, in the presence of triblock copolymer, remains stable for a long time. Reduction of Tollen's reagent to silver colloidal solution seems to be efficient, fast and interesting approach for the preparation of supported silver nanostructures Obtained samples were characterized by powder X-ray diffraction, small angle X-ray scattering (SAXS), UV

  20. Sponge mesoporous silica formation using disordered phospholipid bilayers as template.

    PubMed

    Galarneau, Anne; Sartori, Federica; Cangiotti, Michela; Mineva, Tzonka; Di Renzo, Francesco; Ottaviani, M Francesca

    2010-02-18

    Lecithin/dodecylamine/lactose mixtures in ethanol/aqueous media led to the formation of sponge mesoporous silica (SMS) materials by means of tetraethoxysilane (TEOS) as silica source. SMS materials show a "sponge-mesoporous" porosity with a pore diameter of about 5-6 nm, in accordance to the length of a lecithin bilayer. SMS synthesis was developed to create a new class of powerful biocatalysts able to efficiently encapsulate enzymes by adding a porosity control to the classical sol-gel synthesis and by using phospholipids and lactose as protecting agents for the enzymes. In the present study, the formation of SMS was investigated by using electron paramagnetic resonance (EPR) probes inserted inside phospholipid bilayers. The influence of progressive addition of each component (ethanol, dodecylamine, lactose, TEOS) on phospholipid bilayers was first examined; then, the time evolution of EPR spectra during SMS synthesis was studied. Parameters informative of mobility, structure, order, and polarity around the probes were extracted by computer analysis of the EPR line shape. The results were discussed on the basis of solids characterization by X-ray diffraction, nitrogen isotherm, transmission electron microscopy, and scanning electron microscopy. The results, together with the well-known ability of ethanol to promote membrane hemifusion, suggested that the templating structure is a bicontinuous phospholipid bilayer phase, shaped as a gyroid, resulting of multiple membrane hemifusions induced by the high alcohol content used in SMS synthesis. SMS synthesis was compared to hexagonal mesoporous silica (HMS) synthesis accomplished by adding TEOS to a dodecylamine/EtOH/water mixture. EPR evidenced the difference between HMS and SMS synthesis; the latter uses an already organized but slowly growing mesophase of phospholipids, never observed before, whereas the former shows a progressive elongation of micelles into wormlike structures. SMS-type materials represent a new

  1. Selective catalysis utilizing bifunctionalized MCM-41 mesoporous materials

    SciTech Connect

    Strosahl, Kasey Jean

    2005-05-01

    Selective catalysis is a field that has been under intense investigation for the last 100 years. The most widely used method involves catalysts with stereochemical selectivity. In this type of catalysis, the catalyst controls which reactants will be transformed into the desired product. The secret to employing this type of catalysis, though, is to design the proper catalyst, which can be difficult. One may spend as much time developing the catalyst as spent separating the various products achieved. Another method of selective catalysis is now being explored. The method involves utilizing a multifunctional mesoporous silica catalyst with a gate-keeping capability. Properly functionalized mesoporous materials with well-defined pore morphology and surface properties can provide an ideal three-dimensional environment for anchoring various homogeneous catalysts. These materials can circumvent the multi-sited two-dimensional nature most heterogeneous systems have without adversely impacting the reactant diffusivity. These single-site nanostructured catalysts with ordered geometrical structure are advantageous in achieving high selectivity and reactivity. Mesoporous materials can be prepared to include pores lined homogeneously with tethered catalysts via co-condensation. Additionally, these materials can be reacted with another (RO){sub 3}Si{approx}Z group by using the traditional grafting method; this group is anchored predominantly at the entrances to the pores rather than inside the pores. Thus, if these {approx}Z groups are chosen properly, they can select certain molecules to enter the pores and be converted to products (Scheme 1). In such multifunctional catalysts, the selectivity depends on the discrimination of the gatekeeper. Gate-keeping MCM-41 materials are at the forefront of catalytic substances.

  2. Mesoporous Few-Layer Graphene Platform for Affinity Biosensing Application.

    PubMed

    Ali, Md Azahar; Singh, Chandan; Mondal, Kunal; Srivastava, Saurabh; Sharma, Ashutosh; Malhotra, Bansi D

    2016-03-30

    A label-free, highly reproducible, sensitive, and selective biosensor is proposed using antiapolipoprotein B 100 (AAB) functionalized mesoporous few-layer reduced graphene oxide and nickel oxide (rGO-NiO) nanocomposite for detection of low density lipoprotein (LDL) molecules. The formation of mesoporous rGO-NiO composite on indium tin oxide conductive electrode has been accomplished via electrophoretic technique using colloidal suspension of rGO sheets and NiO nanoparticles. This biosensor shows good stability obtained by surface conjugation of antibody AAB molecules with rGO-NiO matrix by EDC-NHS coupling chemistry. The defect-less few layer rGO sheets, NiO nanoparticles (nNiO) and formation of nanocomposite has been confirmed by Raman mapping, electron microscopic studies, X-ray diffraction, and electrochemical techniques. The synthesized rGO-NiO composite is mesoporous dominated with a small percentage of micro and macroporous structure as is evident by the results of Brunauer-Emmett-Teller experiment. Further, the bioconjugation of AAB with rGO-NiO has been investigated by Fourier transform-infrared spectroscopy studies. The kinetic studies for binding of antigen-antibody (LDL-AAB) and analytical performance of this biosensor have been evaluated by the impedance spectroscopic method. This biosensor exhibits an excellent sensitivity of 510 Ω (mg/dL)(-1) cm(-2) for detection of LDL molecules and is sensitive to 5 mg/dL concentration of LDL in a wide range of 0-130 mg/dL. Thus, this fabricated biosensor is an efficient and highly sensitive platform for the analysis of other antigen-antibody interactions and biomolecules detection. PMID:26950488

  3. Sol Gel-Derived SBA-16 Mesoporous Material

    PubMed Central

    Rivera-Muñoz, Eric M.; Huirache-Acuña, Rafael

    2010-01-01

    The aim of this article is to review current knowledge related to the synthesis and characterization of sol gel-derived SBA-16 mesoporous silicas, as well as a review of the state of the art in this issue, to take stock of knowledge about current and future applications. The ease of the method of preparation, the orderly structure, size and shape of their pores and control, all these achievable through simple changes in the method of synthesis, makes SBA-16 a very versatile material, potentially applicable in many areas of science and molecular engineering of materials. PMID:20957080

  4. Method for rapidly producing microporous and mesoporous materials

    DOEpatents

    Coronado, P.R.; Poco, J.F.; Hrubesh, L.W.; Hopper, R.W.

    1997-11-11

    An improved, rapid process is provided for making microporous and mesoporous materials, including aerogels and pre-ceramics. A gel or gel precursor is confined in a sealed vessel to prevent structural expansion of the gel during the heating process. This confinement allows the gelation and drying processes to be greatly accelerated, and significantly reduces the time required to produce a dried aerogel compared to conventional methods. Drying may be performed either by subcritical drying with a pressurized fluid to expel the liquid from the gel pores or by supercritical drying. The rates of heating and decompression are significantly higher than for conventional methods. 3 figs.

  5. Method for rapidly producing microporous and mesoporous materials

    DOEpatents

    Coronado, Paul R.; Poco, John F.; Hrubesh, Lawrence W.; Hopper, Robert W.

    1997-01-01

    An improved, rapid process is provided for making microporous and mesoporous materials, including aerogels and pre-ceramics. A gel or gel precursor is confined in a sealed vessel to prevent structural expansion of the gel during the heating process. This confinement allows the gelation and drying processes to be greatly accelerated, and significantly reduces the time required to produce a dried aerogel compared to conventional methods. Drying may be performed either by subcritical drying with a pressurized fluid to expel the liquid from the gel pores or by supercritical drying. The rates of heating and decompression are significantly higher than for conventional methods.

  6. Mesoporous tertiary oxides via a novel amphiphilic approach

    SciTech Connect

    Bennett, Natasha; Hall, Simon R. E-mail: Annela.Seddon@bristol.ac.uk; Seddon, Annela M. E-mail: Annela.Seddon@bristol.ac.uk; Hallett, James E.; Kockelmann, Winfried; Ting, Valeska P.; Sadasivan, Sajanikumari; Tooze, Robert P.

    2016-01-01

    We report a facile biomimetic sol-gel synthesis using the sponge phase formed by the lipid monoolein as a structure-directing template, resulting in high phase purity, mesoporous dysprosium- and gadolinium titanates. The stability of monoolein in a 1,4-butanediol and water mixture complements the use of a simple sol-gel metal oxide synthesis route. By judicious control of the lipid/solvent concentration, the sponge phase of monoolein can be directly realised in the pyrochlore material, leading to a porous metal oxide network with an average pore diameter of 10 nm.

  7. Corrosion protection of mesoporous bioactive glass coating on biodegradable magnesium

    NASA Astrophysics Data System (ADS)

    Wang, Xiaojian; Wen, Cuie

    2014-06-01

    A mesoporous bioactive glass (MBG) coating was synthesized and coated on pure Mg substrate using a sol-gel dip-coating method. The MBG coating uniformly covered the Mg substrate with a thickness of ˜1.5 μm. Electrochemical and immersion tests were performed in order to investigate the biodegradation performance of Mg with and without different surface coatings in simulated body fluids (SBF) at 37 °C. Results revealed that the MBG coated Mg displayed a significantly lower biodegradation rate, in comparison with normal bioactive glass (BG) coated and uncoated Mg samples.

  8. Mesoporous silica nanoparticles for biomedical and catalytical applications

    SciTech Connect

    Sun, Xiaoxing

    2011-01-01

    Mesoporous silica materials, discovered in 1992 by the Mobile Oil Corporation, have received considerable attention in the chemical industry due to their superior textual properties such as high surface area, large pore volume, tunable pore diameter, and narrow pore size distribution. Among those materials, MCM-41, referred to Mobile Composition of Matter NO. 41, contains honeycomb liked porous structure that is the most common mesoporous molecular sieve studied. Applications of MCM-41 type mesoporous silica material in biomedical field as well as catalytical field have been developed and discussed in this thesis. The unique features of mesoporous silica nanoparticles were utilized for the design of delivery system for multiple biomolecules as described in chapter 2. We loaded luciferin into the hexagonal channels of MSN and capped the pore ends with gold nanoparticles to prevent premature release. Luciferase was adsorbed onto the outer surface of the MSN. Both the MSN and the gold nanoparticles were protected by poly-ethylene glycol to minimize nonspecific interaction of luciferase and keep it from denaturating. Controlled release of luciferin was triggered within the cells and the enzymatic reaction was detected by a luminometer. Further developments by varying enzyme/substrate pairs may provide opportunities to control cell behavior and manipulate intracellular reactions. MSN was also served as a noble metal catalyst support due to its large surface area and its stability with active metals. We prepared MSN with pore diameter of 10 nm (LP10-MSN) which can facilitate mass transfer. And we successfully synthesized an organo silane, 2,2'-Bipyridine-amide-triethoxylsilane (Bpy-amide-TES). Then we were able to functionalize LP10-MSN with bipyridinyl group by both post-grafting method and co-condensation method. Future research of this material would be platinum complexation. This Pt (II) complex catalyst has been reported for a C-H bond activation reaction as an

  9. Synthesis of white light emitting mesoporous carbon-silica nanocomposite

    NASA Astrophysics Data System (ADS)

    Sato, Koji; Ishikawa, Yukari; Matsumura, Akihiro; Ishii, Yosuke; Kawasaki, Shinji

    2011-05-01

    White light emitting mesoporous carbon-silica (MPCS) was synthesized by serially adding triblock copolymer (Pluronic, F127), ethanol (EtOH), tetraethoxysilane (TEOS), hydrochloric acid aqueous (HCl) and phenol-formaldehyde resin (resol) followed by the heat treatments of carbonization and oxidation. The PL intensity of MPCS showed a tendency to be strong with increasing of HCl concentration in >= 0.2 M. The pore size of MPCS that emits white light was 8 ~ 9 nm and the specific surface area was 320 ~ 418 m2 / g.

  10. "Bricks and mortar" self-assembly approach to graphitic mesoporous carbon nanocomposites

    SciTech Connect

    Fulvio, P. F.; Mayes, R.; Wang, X. Q.; Mahurin, S., M.; Bauer, J. C.; Presser, V.; McDonough, J.; Gogotsi, Y.; Dai, S.

    2011-04-20

    Mesoporous carbon materials do not have sufficient ordering at the atomic scale to exhibit good electronic conductivity. To date, mesoporous carbons having uniform mesopores and high surface areas have been prepared from partially-graphitizable precursors in the presence of templates. High temperature thermal treatments above 2000 °C, which are usually required to increase conductivity, result in a partial or total collapse of the mesoporous structures and reduced surface areas induced by growth of graphitic domains, limiting their applications in electric double layer capacitors and lithium-ion batteries. In this work, we successfully implemented a “brick-and-mortar” approach to obtain ordered graphitic mesoporous carbon nanocomposites with tunable mesopore sizes below 850 °C without using graphitization catalysts or high temperature thermal treatments. Phenolic resin-based mesoporous carbons act as mortar to highly conductive carbon blacks and carbon onions (bricks). The capacitance and resistivity of final materials can be tailored by changing the mortar to brick ratios.

  11. Structure and Luminescence Properties of Eu3+-Doped Cubic Mesoporous Silica Thin Films

    PubMed Central

    2010-01-01

    Eu3+ ions-doped cubic mesoporous silica thin films with a thickness of about 205 nm were prepared on silicon and glass substrates using triblock copolymer as a structure-directing agent using sol–gel spin-coating and calcination processes. X-ray diffraction and transmission electron microscopy analysis show that the mesoporous silica thin films have a highly ordered body-centered cubic mesoporous structure. High Eu3+ ion loading and high temperature calcination do not destroy the ordered cubic mesoporous structure of the mesoporous silica thin films. Photoluminescence spectra show two characteristic emission peaks corresponding to the transitions of5D0-7F1 and 5D0-7F2 of Eu3+ ions located in low symmetry sites in mesoporous silica thin films. With the Eu/Si molar ratio increasing to 3.41%, the luminescence intensity of the Eu3+ ions-doped mesoporous silica thin films increases linearly with increasing Eu3+ concentration. PMID:20672132

  12. A cationic surfactant assisted selective etching strategy to hollow mesoporous silica spheres.

    PubMed

    Fang, Xiaoliang; Chen, Cheng; Liu, Zhaohui; Liu, Pengxin; Zheng, Nanfeng

    2011-04-01

    Hollow mesoporous silica spheres have recently attracted increasing attention. However, effective synthesis of uniform hollow mesoporous spheres with controllable well-defined pore structures for fundamental research and practical applications has remained a significant challenge. In this work, a straightforward and effective "cationic surfactant assisted selective etching" synthetic strategy was developed for the preparation of high-quality hollow mesoporous silica spheres with either wormhole-like or oriented mesoporous shell. The as-prepared hollow mesoporous silica spheres have large surface area, high pore volume, and controllable structure parameters. Our experiments demonstrated that cationic surfactant plays critical roles in forming the hollow mesoporous structure. A formation mechanism involving the etching of solid SiO(2) accelerated by cationic surfactant followed by the redeposition of dissolved silica species directed by cationic surfactant is proposed. Furthermore, the strategy can be extended as a general strategy to transform silica-coated composite materials into yolk-shell structures with either wormhole-like or oriented mesoporous shell. PMID:21305093

  13. Post-treatment and characterization of novel luminescent hybrid bimodal mesoporous silicas

    SciTech Connect

    Li Yuzhen; Sun Jihong; Wu Xia; Lin Li; Gao Lin

    2010-08-15

    A novel luminescent hybrid bimodal mesoporous silicas (LHBMS) were synthesized via grafting 1,8-Naphthalic anhydride into the pore channels of bimodal mesoporous silicas (BMMs) for the first time. The resulting samples were characterized by powder X-ray diffraction (XRD), N{sub 2} adsorption/desorption measurement, Fourier transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM), UV-vis absorption spectroscopy, and Photoluminescence spectroscopy (PL). The results show that 1,8-Naphthalic anhydride organic groups have been successfully introduced into the mesopores of the BMMs and the hybrid silicas are of bimodal mesoporous structure with the ordered small mesopores of around 3 nm and the large mesopores of uniform intra-nanoparticle. The excellent photoluminescent performance of LHBMS has a blue shift compared to that of 2-[3-(triethoxysilyl) propyl-1 H-Benz [de]isoquinoline-1, 3(2 H)-dione, suggesting the existence of the quantum confinement effectiveness. - Graphical abstract: A novel luminescent hybrid bimodal mesoporous silicas was synthesized via modification and then grafting with 1, 8-Naphthalic anhydride, which would be strong potential application in the photoluminescent fields.

  14. Mesoporous ZnS–NiS Nanocomposites for Nonenzymatic Electrochemical Glucose Sensors

    PubMed Central

    Wei, Chengzhen; Cheng, Cheng; Zhao, Junhong; Wang, Zhangtao; Wu, Haipeng; Gu, Kaiyue; Du, Weimin; Pang, Huan

    2015-01-01

    Mesoporous ZnS–NiS composites are prepared via ion- exchange reactions using ZnS as the precursor. The prepared mesoporous ZnS–NiS composite materials have large surface areas (137.9 m2 g−1) compared with the ZnS precursor. More importantly, the application of these mesoporous ZnS–NiS composites as nonenzymatic glucose sensors was successfully explored. Electrochemical sensors based on mesoporous ZnS–NiS composites exhibit a high selectivity and a low detection limit (0.125 μm) toward the oxidation of glucose, which can mainly be attributed to the morphological characteristics of the mesoporous structure with high specific surface area and a rational composition of the two constituents. In addition, the mesoporous ZnS–NiS composites coated on the surface of electrodes can be used to modify the mass transport regime, and this alteration can, in favorable circumstances, facilitate the amperometric discrimination between species. These results suggest that such mesoporous ZnS–NiS composites are promising materials for nonenzymatic glucose sensors. PMID:25861568

  15. Bovine Serum Albumin Adsorption in Mesoporous Titanium Dioxide: Pore Size and Pore Chemistry Effect.

    PubMed

    Liu, Chang; Guo, Yanhua; Hong, Qiliang; Rao, Chao; Zhang, Haijuan; Dong, Yihui; Huang, Liangliang; Lu, Xiaohua; Bao, Ningzhong

    2016-04-26

    Understanding the mechanism of protein adsorption and designing materials with high sensitivity, high specificity and fast response are critical to develop the next-generation biosensing and diagnostic platforms. Mesoporous materials with high surface area, tunable pores, and good thermal/hydrostatic stabilities are promising candidates in this field. Because of the excellent biocompatibility, titanium dioxide has received an increasing interest in the past decade for biomedical applications. In this work, we synthesized mesoporous titanium dioxide with controlled pore sizes (7.2-28.0 nm) and explored their application for bovine serum albumin (BSA) adsorption. Scanning electron microscopy (SEM), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and nitrogen adsorption/desorption experiments were performed to characterize the mesoporous TiO2 samples before and after BSA adsorption. Isothermal microcalorimetry was applied to measure both the adsorption heat and conformation rearrangement heat of BSA in those mesopores. We also carried out thermogravimetry measurements to qualitatively estimate the concentration of hydroxyl groups, which plays an important role in stabilizing BSA in-pore adsorption. The adsorption stability was also examined by leaching experiments. The results showed that TiO2 mesopores can host BSA adsorption when their diameters are larger than the hydrodynamic size of BSA (∼9.5 nm). In larger mesopores studied, two BSA molecules were adsorbed in the same pores. In contrast to the general understanding that large mesopores demonstrate poor stabilities for protein adsorptions, the synthesized mesoporous TiO2 samples demonstrated good leaching stabilities for BSA adsorption. This is probably due to the combination of the mesoporous confinement and the in-pore hydroxyl groups. PMID:27048991

  16. One-step synthesis of degradable T1-FeOOH functionalized hollow mesoporous silica nanocomposites from mesoporous silica spheres

    NASA Astrophysics Data System (ADS)

    Peng, Yung-Kang; Tseng, Yu-Jui; Liu, Chien-Liang; Chou, Shang-Wei; Chen, Yu-Wei; Tsang, S. C. Edman; Chou, Pi-Tai

    2015-01-01

    The combination of a hollow mesoporous structure and a magnetic resonance (MR) contrast agent has shown its potential in simultaneous drug delivery and cell tracking applications. However, the preparation of this kind of nanocomposite is complicated and usually takes several days, which is unsuitable for scaled-up production. To overcome these hurdles, we report herein a facile method to synthesize iron oxide hydroxide functionalized hollow mesoporous silica spheres (FeOOH/HMSS) in a one-step manner. By carefully controlling the reaction kinetics of K2FeO4 in water, the gram-scale production of FeOOH/HMSS can be readily achieved at 60 °C for as short as 30 min. Most importantly, this synthetic process is also cost-effective and eco-friendly in both the precursor (K2FeO4 and H2O) and the product (FeOOH). The mechanism for the formation of a hollow structure was carefully investigated, which involves the synergetic effect of the surfactant CTAB and the side product KOH. Having outstanding biocompatibility, these degradable nanocolloids also demonstrate their feasibility in in vitro/vivo MR imaging and in vitro drug delivery.The combination of a hollow mesoporous structure and a magnetic resonance (MR) contrast agent has shown its potential in simultaneous drug delivery and cell tracking applications. However, the preparation of this kind of nanocomposite is complicated and usually takes several days, which is unsuitable for scaled-up production. To overcome these hurdles, we report herein a facile method to synthesize iron oxide hydroxide functionalized hollow mesoporous silica spheres (FeOOH/HMSS) in a one-step manner. By carefully controlling the reaction kinetics of K2FeO4 in water, the gram-scale production of FeOOH/HMSS can be readily achieved at 60 °C for as short as 30 min. Most importantly, this synthetic process is also cost-effective and eco-friendly in both the precursor (K2FeO4 and H2O) and the product (FeOOH). The mechanism for the formation of a

  17. Mesoporous MgO: Synthesis, physico-chemical, and catalytic properties

    NASA Astrophysics Data System (ADS)

    Maerle, A. A.; Kasyanov, I. A.; Moskovskaya, I. F.; Romanovsky, B. V.

    2016-06-01

    Mesoporous MgO was obtained via the hydrothermal synthesis using both ionogenic and non-ionogenic surfactants as structure-directing templates. The materials prepared were characterized by SEM, BET-N2, XRD, and TG-DTA techniques. MgO particles are spherical 20-μm aggregates of primary oxide particles well shaped as rectangular parallelepipeds. Magnesium oxide samples have the specific surface area of 290-400 m2/g and pore sizes of 3.3-4.1 nm. Their mesoporous structure remained unchanged after calcination up to 350°C. Catalytic activity of mesoporous MgO was studied in acetone condensation reaction.

  18. Preparation of Mesoporous Silica Templated Metal Nanowire Films on Foamed Nickel Substrates

    SciTech Connect

    Campbell, Roger; Kenik, Edward A; Bakker, Martin; Havrilla, George; Montoya, Velma; Shamsuzzoha, Mohammed

    2006-01-01

    A method has been developed for the formation of high surface area nanowire films on planar and three-dimensional metal electrodes. These nanowire films are formed via electrodeposition into a mesoporous silica film. The mesoporous silica films are formed by a sol-gel process using Pluronic tri-block copolymers to template mesopore formation on both planar and three-dimensional metal electrodes. Surface area increases of up to 120-fold have been observed in electrodes containing a templated film when compared to the same types of electrodes without the templated film.

  19. Facile fabrication and supercapacitive properties of mesoporous zinc cobaltite microspheres

    NASA Astrophysics Data System (ADS)

    Wang, Qinghong; Du, Jialu; Zhu, Yuxuan; Yang, Jiaqin; Chen, Juan; Wang, Chao; Li, Liang; Jiao, Lifang

    2015-06-01

    Mesoporous zinc cobaltite (ZnCo2O4) microspheres have been successfully prepared by a facile solvothermal method followed by an annealing process. The as-prepared ZnCo2O4 displays uniform sphere-like morphology composed of interconnected ZnCo2O4 nanoparticles. The Brunauer-Emmett-Teller (BET) surface area of mesoporous ZnCo2O4 microspheres is about 51.4 m2 g-1 with dominant pore diameter of 7.5 nm. The novel ZnCo2O4 material exhibits high specific capacitance of 953.2 F g-1 and 768.5 F g-1 at discharge current densities of 4 A g-1 and 30 A g-1, respectively. The energy density can be estimated to be 26.68 Wh kg-1 at a power density of 8 kW kg-1. The specific capacitance retention is 97.8% after 3000 cycles, suggesting its excellent cycling stability. The superior electrochemical performance is mainly attributed to the uniformity of the surface structure and the porosity of the microspheres, which benefit electrons and ions transportation, provide large electrode-electrolyte contact area, and meanwhile reduce volume change during the charge-discharge process. This method of constructing porous microspheres is very effective, yet simple, and it could be applied in other high-performance metal oxide electrode materials for electrochemical capacitors, as well as in Li-ion batteries.

  20. Mesoporous silica as carrier of antioxidant for food packaging materials

    NASA Astrophysics Data System (ADS)

    Buonocore, Giovanna Giuliana; Gargiulo, Nicola; Verdolotti, Letizia; Liguori, Barbara; Lavorgna, Marino; Caputo, Domenico

    2014-05-01

    Mesoporous silicas have been long recognized as very promising materials for the preparation of drug delivery systems. In this work SBA-15 mesoporous silica has been functionalized with amino-silane to be used as carrier of antioxidant compound in the preparation of active food packaging materials exhibiting tailored release properties. Active films have been prepared by loading the antioxidant tocopherol, the purely siliceous SBA-15 and the aminofunctionalized SBA-15 loaded with tocopherol into LDPE matrix trough a two-step process (mixing+extrusion). The aim of the present work is the study of the effect of the pore size and of the chemical functionality of the internal walls of the mesophase on the migration of tocopherol from active LDPE polymer films. Moreover, it has been proved that the addition of the active compound do not worsen the properties of the film such as optical characteristic and water vapor permeability, thus leading to the development of a material which could be favorably used mainly, but not exclusively, in the sector of food packaging.

  1. Enhanced capacitive deionization of graphene/mesoporous carbon composites.

    PubMed

    Zhang, Dengsong; Wen, Xiaoru; Shi, Liyi; Yan, Tingting; Zhang, Jianping

    2012-09-01

    Capacitive deionization (CDI) with low-energy consumption and no secondary waste is emerging as a novel desalination technology. Graphene/mesoporous carbon (GE/MC) composites have been prepared via a direct triblock-copolymer-templating method and used as CDI electrodes for the first time. The influences of GE content on the textural properties and electrochemical performance were studied. The transmission electron microscopy and nitrogen adsorption-desorption analysis indicate that mesoporous structures are well retained and the composites display improved specific surface area and pore size distribution, as well as pore volume. Well dispersed GE nanosheets are deduced to be beneficial for enhanced electrical conductivity. The electrochemical performance of electrodes in an NaCl aqueous solution was characterized by cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy measurements. The composite electrodes perform better on the capacitance values, conductive behaviour, rate performance and cyclic stability. The desalination capacity of the electrodes was evaluated by a batch mode electrosorptive experiment and the amount of adsorbed ions can reach 731 μg g⁻¹ for the GE/MC composite electrode with a GE content of 5 wt%, which is much higher than that of MC alone (590 μg g⁻¹). The enhanced CDI performance of the composite electrodes can be attributed to the better conductive behaviour and higher specific surface area. PMID:22836788

  2. Flash freezing route to mesoporous polymer nanofibre networks

    PubMed Central

    Samitsu, Sadaki; Zhang, Rui; Peng, Xinsheng; Krishnan, Mohan Raj; Fujii, Yoshihisa; Ichinose, Izumi

    2013-01-01

    There are increasing requirements worldwide for advanced separation materials with applications in environmental protection processes. Various mesoporous polymeric materials have been developed and they are considered as potential candidates. It is still challenging, however, to develop economically viable and durable separation materials from low-cost, mass-produced materials. Here we report the fabrication of a nanofibrous network structure from common polymers, based on a microphase separation technique from frozen polymer solutions. The resulting polymer nanofibre networks exhibit large free surface areas, exceeding 300 m2 g−1, as well as small pore radii as low as 1.9 nm. These mesoporous polymer materials are able to rapidly adsorb and desorb a large amount of carbon dioxide and are also capable of condensing organic vapours. Furthermore, the nanofibres made of engineering plastics with high glass transition temperatures over 200 °C exhibit surprisingly high, temperature-dependent adsorption of organic solvents from aqueous solution. PMID:24145702

  3. Mesoporous Phosphate Heterostructures: Synthesis and Application on Adsorption and Catalysis

    NASA Astrophysics Data System (ADS)

    Moreno-Tost, Ramón; Jiménez-Jiménez, José; Infantes-Molina, Antonia; Cavalcante, Celio L.; Azevedo, Diana C. S.; Soriano, María Dolores; López Nieto, José Manuel; Jiménez-López, Antonio; Rodríguez-Castellón, Enrique

    Porous phosphate heterostructures (PPHs) are solids formed by a layered metal(IV) phosphate expanded with silica galleries obtained by combining the two main strategies for obtaining mesoporous materials [pillared layered structures (PLS') and MCM-41]. The different synthetic pathways for obtaining mesoporous phosphate structures with silica galleries with Zr- or Ti-doped silica, the study of their structural, textural and acid properties, its functionalisation with different organic substances such as propionitrile, 3-aminopropyl triethoxysilane, (3-mercaptopropyl)trimethoxysilane, vinyltrimethoxysilane, phenyltriethoxysilane and 3-(triethoxysilyl)propionitrile are discussed. The preparation of metal-supported catalysts and their application in gas separation, adsorption and catalysis are reviewed. Specifically, the use of Cu- and Fe-exchanged PPH for the adsorption of benzothiophene and the separation of propane/propene is the main application as adsorbent. The hydrotreating of aromatic hydrocarbons using ruthenium-impregnated catalysts via hydrogenation and hydrogenolysis/hydrocracking for the production of clean diesel fuels, the selective catalytic reduction of NO from stationary and mobile sources by using Cu-PPH with 1, 3 and 7 wt% of Cu and the selective oxidation of hydrogen sulphide to sulphur with vanadium-containing PPH are the three catalytic reactions of environmental interest studied.

  4. Nitrogen-doped mesoporous carbons for high performance supercapacitors

    NASA Astrophysics Data System (ADS)

    Wu, Kai; Liu, Qiming

    2016-08-01

    The mesoporous carbons have been synthesized by using α-D(+)-Glucose, D-Glucosamine hydrochloride or their mixture as carbon precursors and mesoporous silicas (SBA-15 or MCF) as hard templates. The as-prepared products show a large pore volume (0.59-0.97 cm3 g-1), high surface areas (352.72-1152.67 m2 g-1) and rational nitrogen content (ca. 2.5-3.9 wt.%). The results of electrochemical tests demonstrate that both heteroatom doping and suitable pore structure play a decisive role in the performance of supercapacitors. The representative sample of SBA-15 replica obtained using D-Glucosamine hydrochloride only exhibits high specific capacitance (212.8 F g-1 at 0.5 A g-1) and good cycle durability (86.1% of the initial capacitance after 2000 cycles) in 6 M KOH aqueous electrolyte, which is attributed to the contribution of double layer capacitance and pseudo-capacitance. The excellent electrochemical performance makes it a promising electrode material for supercapacitors.

  5. Synthesis and textural evolution of alumina particles with mesoporous structures

    SciTech Connect

    Liu Xun; Peng Tianyou; Yao Jinchun; Lv Hongjin; Huang Cheng

    2010-06-15

    Alumina particles with mesostructures were synthesized through a chemical precipitation method by using different inorganic aluminum salts followed by a heterogeneous azeotropic distillation and calcination process. The obtained mesoporous {gamma}-alumina particles were systematically characterized by the X-ray diffraction, transmission electron microscopy and nitrogen adsorption-desorption measurement. Effects of the aluminum salt counter anion, pH value and the azeotropic distillation process on the structural or textural evolution of alumina particles were investigated. It is found that Cl{sup -} in the reaction solution can restrain the textural evolution of the resultant precipitates into two-dimensional crystallized pseudoboehmite lamellae during the heterogeneous azeotropic distillation, and then transformed into {gamma}-Al{sub 2}O{sub 3} particles with mesostructures after further calcination at 1173 K, whereas coexisting SO{sub 4}{sup 2-} can promote above morphology evolution and then transformed into {gamma}-Al{sub 2}O{sub 3} nanofibers after calcination at 1173 K. Moreover nearly all materials retain relatively high specific surface areas larger than 100 m{sup 2} g{sup -1} even after calcinations at 1173 K. - Graphical abstract: Co-existing Cl{sup -} is beneficial for the formation of {gamma}-alumina nanoparticles with mesostructures during the precipitation process. Interparticle and intraparticle mesopores can be derived from acidic solution and near neutral solution, respectively.

  6. Synthesis and characterization of nanocrystalline mesoporous zirconia using supercritical drying.

    PubMed

    Tyagi, Beena; Sidhpuria, Kalpesh; Shaik, Basha; Jasra, Raksh Vir

    2006-06-01

    Synthesis of nano-crystalline zirconia aerogel was done by sol-gel technique and supercritical drying using n-propanol solvent at and above supercritical temperature (235-280 degrees C) and pressure (48-52 bar) of n-propanol. Zirconia xerogel samples have also been prepared by conventional thermal drying method to compare with the super critically dried samples. Crystalline phase, crystallite size, surface area, pore volume, and pore size distribution were determined for all the samples in detail to understand the effect of gel drying methods on these properties. Supercritical drying of zirconia gel was observed to give thermally stable, nano-crystalline, tetragonal zirconia aerogels having high specific surface area and porosity with narrow and uniform pore size distribution as compared to thermally dried zirconia. With supercritical drying, zirconia samples show the formation of only mesopores whereas in thermally dried samples, substantial amount of micropores are observed along with mesopores. The samples prepared using supercritical drying yield nano-crystalline zirconia with smaller crystallite size (4-6 nm) as compared to higher crystallite size (13-20 nm) observed with thermally dried zirconia. PMID:17025056

  7. Nanostructured mesoporous materials for lithium-ion battery applications

    NASA Astrophysics Data System (ADS)

    Balaya, P.; Saravanan, K.; Hariharan, S.; Ramar, V.; Lee, H. S.; Kuezma, M.; Devaraj, S.; Nagaraju, D. H.; Ananthanarayanan, K.; Mason, C. W.

    2011-06-01

    The Energy crisis happens to be one of the greatest challenges we are facing today. In this view, much effort has been made in developing new, cost effective, environmentally friendly energy conversion and storage devices. The performance of such devices is fundamentally related to material properties. Hence, innovative materials engineering is important in solving the energy crisis problem. One such innovation in materials engineering is porous materials for energy storage. Porous electrode materials for lithium-ion batteries (LIBs) offer a high degree of electrolyte-electrode wettability, thus enhancing the electrochemical activity within the material. Among the porous materials, mesoporous materials draw special attention, owing to shorter diffusion lengths for Li+ and electronic movement. Nanostructured mesoporous materials also offer better packing density compared to their nanostructured counterparts such as nanopowders, nanowires, nanotubes etc., thus opening a window for developing electrode materials with high volumetric energy densities. This would directly translate into a scenario of building batteries which are much lighter than today's commercial LIBs. In this article, the authors present a simple, soft template approach for preparing both cathode and anode materials with high packing density for LIBs. The impact of porosity on the electrochemical storage performance is highlighted.

  8. Preparation and characterization of bioactive mesoporous wollastonite - Polycaprolactone composite scaffold.

    PubMed

    Wei, Jie; Chen, Fangping; Shin, Jung-Woog; Hong, Hua; Dai, Chenglong; Su, Jiancan; Liu, Changsheng

    2009-02-01

    A well-defined mesoporous structure of wollastonite with high specific surface area was synthesized using surfactant P123 (triblock copolymer) as template, and its composite scaffolds with poly(epsilon-caprolactone) (PCL) were fabricated by a simple method of solvent casting-particulate leaching. The measurements of the water contact angles suggest that the incorporation of either mesoporous wollastonite (m-WS) or conventional wollastonite (c-WS) into PCL could improve the hydrophilicity of the composites, and the former was more effective than the later. The bioactivity of the composite scaffold was evaluated by soaking the scaffolds in a simulated body fluid (SBF) and the results show that the m-WS/PCL composite (m-WPC) scaffolds can induce a dense and continuous layer of apatite after soaking for 1 week, as compared with the scattered and discrete apatite particles on the c-WS/PCL composite (c-WPC) scaffolds. The m-WPC had a significantly enhanced apatite-forming bioactivity compared with the c-WPC owing to the high specific surface area and pore volume of m-WS. In addition, attachment and proliferation of MG(63) cells on m-WPC scaffolds were significantly higher than that of c-WPC, revealing that m-WPC scaffolds had excellent biocompatibility. Such improved properties of m-WPC should be helpful for developing new biomaterials and may have potential use in hard tissue repair. PMID:19019424

  9. Alendronate functionalized mesoporous hydroxyapatite nanoparticles for drug delivery

    SciTech Connect

    Li, Dongdong; Zhu, Yuntao; Liang, Zhiqiang

    2013-06-01

    Highlights: ► The synthesized mesoporous hydroxyapatite has nanostructure and bioactivity. ► The materials have high surface area and amino group. ► The materials show higher drug loading and slower release rate than pure HAP. - Abstract: Mesoporous nanosized hydroxyapatite (HAP) functionalized by alendronate (ALN) was synthesized using cationic surfactant CTAB as template. The structural, morphological and textural properties were fully characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and N{sub 2} adsorption/desorption. Then the obtained materials were performed as drug delivery carriers using ibuprofen (IBU) as a model drug to investigate their drug storage/release properties in simulated body fluid (SBF). The materials showed relatively slower release rate compared with HAP due to the ionic interaction between -NH{sub 3}{sup +} on the matrix and -COO{sup −}belongs to IBU. The system provides a new concept for improving the drug loading or slowing down the release rate.

  10. Extreme Light Management in Mesoporous Wood Cellulose Paper for Optoelectronics.

    PubMed

    Zhu, Hongli; Fang, Zhiqiang; Wang, Zhu; Dai, Jiaqi; Yao, Yonggang; Shen, Fei; Preston, Colin; Wu, Wenxin; Peng, Peng; Jang, Nathaniel; Yu, Qingkai; Yu, Zongfu; Hu, Liangbing

    2016-01-26

    Wood fibers possess natural unique hierarchical and mesoporous structures that enable a variety of new applications beyond their traditional use. We dramatically modulate the propagation of light through random network of wood fibers. A highly transparent and clear paper with transmittance >90% and haze <1.0% applicable for high-definition displays is achieved. By altering the morphology of the same wood fibers that form the paper, highly transparent and hazy paper targeted for other applications such as solar cell and antiglare coating with transmittance >90% and haze >90% is also achieved. A thorough investigation of the relation between the mesoporous structure and the optical properties in transparent paper was conducted, including full-spectrum optical simulations. We demonstrate commercially competitive multitouch touch screen with clear paper as a replacement for plastic substrates, which shows excellent process compatibility and comparable device performance for commercial applications. Transparent cellulose paper with tunable optical properties is an emerging photonic material that will realize a range of much improved flexible electronics, photonics, and optoelectronics. PMID:26673796

  11. Colloidal mesoporous silica nanoparticles enhance the biological activity of resveratrol.

    PubMed

    Summerlin, Natalie; Qu, Zhi; Pujara, Naisarg; Sheng, Yong; Jambhrunkar, Siddharth; McGuckin, Michael; Popat, Amirali

    2016-08-01

    The naturally occurring polyphenol resveratrol (RES) has attracted increasing attention in recent years due to its antioxidant, anti-inflammatory, and anticancer activity. However, resveratrol's promising potential as a nutraceutical is hindered by its poor aqueous solubility, which limits its biological activity. Here we show that encapsulating resveratrol in colloidal mesoporous silica nanoparticles (MCM-48-RES) enhances its saturated solubility by ∼95% and increases its in vitro release kinetics compared to pure resveratrol. MCM-48-RES showed high loading capacity (20% w/w) and excellent encapsulation efficiency (100%). When tested against HT-29 and LS147T colon cancer cell lines, MCM-48-RES-mediated in vitro cell death was higher than that of pure resveratrol, mediated via the PARP and cIAP1 pathways. Finally, MCM-48-RES treatment also inhibited lipopolysaccharide-induced NF-κB activation in RAW264.7 cells, demonstrating improved anti-inflammatory activity. More broadly, our observations demonstrate the potential of colloidal mesoporous silica nanoparticles as next generation delivery carriers for hydrophobic nutraceuticals. PMID:27060664

  12. Tablet preformulations of indomethacin-loaded mesoporous silicon microparticles.

    PubMed

    Tahvanainen, Maria; Rotko, Tanja; Mäkilä, Ermei; Santos, Hélder A; Neves, Diogo; Laaksonen, Timo; Kallonen, Aki; Hämäläinen, Keijo; Peura, Marko; Serimaa, Ritva; Salonen, Jarno; Hirvonen, Jouni; Peltonen, Leena

    2012-01-17

    In this study, indomethacin-loaded thermally oxidized mesoporous silicon microparticles (TOPSi-IMC) were formulated into tablets with excipients in order to improve the dissolution and permeability properties of the poorly soluble drug. Formulations of TOPSi-IMC particles and excipients were prepared at different TOPSi-IMC particle ratios (25, 30 and 35%). The formulations were compressed by direct compression technique with a single punch tablet machine. For comparison, a formulation containing the bulk IMC (indomethacin) and the same excipients without thermally oxidized mesoporous silicon microparticles particles (TOPSi) was prepared and compressed into tablets. The TOPSi-IMC tablets were characterised according to weight, thickness, crushing strength, disintegration time and dissolution rate. The results of this study show that TOPSi-IMC particles can be compressed to a conventional tablet. The release rate of the drug and its permeation across intestinal cells model (Caco-2) from TOPSi-IMC tablets was improved compared to the bulk IMC tablets. The dissolution rate and permeability of IMC from the tablets decreased with increasing ratio of the TOPSi-IMC particles in the formulation. The phenomenon is, presumably, a result of the loss of unique pore structure of the particles due to deformation of the particles under the compression load. PMID:22063301

  13. Influence of spatial configurations on electromagnetic interference shielding of ordered mesoporous carbon/ordered mesoporous silica/silica composites

    PubMed Central

    Wang, Jiacheng; Zhou, Hu; Zhuang, Jiandong; Liu, Qian

    2013-01-01

    Ordered mesoporous carbons (OMCs), obtained by nanocasting using ordered mesoporous silicas (OMSs) as hard templates, exhibit unique arrangements of ordered regular nanopore/nanowire mesostructures. Here, we used nanocasting combined with hot-pressing to prepare 10 wt% OMC/OMS/SiO2 ternary composites possessing various carbon mesostructure configurations of different dimensionalities (1D isolated CS41 carbon nanowires, 2D hexagonal CMK-3 carbon, and 3D cubic CMK-1 carbon). The electric/dielectric properties and electromagnetic interference (EMI) shielding efficiency (SE) of the composites were influenced by spatial configurations of carbon networks. The complex permittivity and the EMI SE of the composites in the X-band frequency range decreased for the carbon mesostructures in the following order: CMK-3-filled > CMK-1-filled > CS41-filled. Our study provides technical directions for designing and preparing high-performance EMI shielding materials. Our OMC-based silica composites can be used for EMI shielding, especially in high-temperature or corrosive environments, owing to the high stability of the OMC/OMS fillers and the SiO2 matrix. Related shielding mechanisms are also discussed. PMID:24248277

  14. Influence of spatial configurations on electromagnetic interference shielding of ordered mesoporous carbon/ordered mesoporous silica/silica composites.

    PubMed

    Wang, Jiacheng; Zhou, Hu; Zhuang, Jiandong; Liu, Qian

    2013-01-01

    Ordered mesoporous carbons (OMCs), obtained by nanocasting using ordered mesoporous silicas (OMSs) as hard templates, exhibit unique arrangements of ordered regular nanopore/nanowire mesostructures. Here, we used nanocasting combined with hot-pressing to prepare 10 wt% OMC/OMS/SiO2 ternary composites possessing various carbon mesostructure configurations of different dimensionalities (1D isolated CS41 carbon nanowires, 2D hexagonal CMK-3 carbon, and 3D cubic CMK-1 carbon). The electric/dielectric properties and electromagnetic interference (EMI) shielding efficiency (SE) of the composites were influenced by spatial configurations of carbon networks. The complex permittivity and the EMI SE of the composites in the X-band frequency range decreased for the carbon mesostructures in the following order: CMK-3-filled > CMK-1-filled > CS41-filled. Our study provides technical directions for designing and preparing high-performance EMI shielding materials. Our OMC-based silica composites can be used for EMI shielding, especially in high-temperature or corrosive environments, owing to the high stability of the OMC/OMS fillers and the SiO2 matrix. Related shielding mechanisms are also discussed. PMID:24248277

  15. Influence of spatial configurations on electromagnetic interference shielding of ordered mesoporous carbon/ordered mesoporous silica/silica composites

    NASA Astrophysics Data System (ADS)

    Wang, Jiacheng; Zhou, Hu; Zhuang, Jiandong; Liu, Qian

    2013-11-01

    Ordered mesoporous carbons (OMCs), obtained by nanocasting using ordered mesoporous silicas (OMSs) as hard templates, exhibit unique arrangements of ordered regular nanopore/nanowire mesostructures. Here, we used nanocasting combined with hot-pressing to prepare 10 wt% OMC/OMS/SiO2 ternary composites possessing various carbon mesostructure configurations of different dimensionalities (1D isolated CS41 carbon nanowires, 2D hexagonal CMK-3 carbon, and 3D cubic CMK-1 carbon). The electric/dielectric properties and electromagnetic interference (EMI) shielding efficiency (SE) of the composites were influenced by spatial configurations of carbon networks. The complex permittivity and the EMI SE of the composites in the X-band frequency range decreased for the carbon mesostructures in the following order: CMK-3-filled > CMK-1-filled > CS41-filled. Our study provides technical directions for designing and preparing high-performance EMI shielding materials. Our OMC-based silica composites can be used for EMI shielding, especially in high-temperature or corrosive environments, owing to the high stability of the OMC/OMS fillers and the SiO2 matrix. Related shielding mechanisms are also discussed.

  16. Anion Binding in Self-Assembled Monolayers in Mesoporous Supports (SAMMS)

    SciTech Connect

    Mattigod, Shas V.; Fryxell, Glen E.; Parker, Kent E.

    2007-02-19

    The binding of various anions to cationic transition metal complexes lining the pores of mesoporous silica is characterized and correlated to anion basicity. By lining the pore surfaces of mesoporous silica with self-assembled monolayer of organosilanes terminated with chemically selective ligands, a powerful new class of heavy metal sorbents has been realized, called self-assembled monolayers on mesoporous supports (SAMMS) [1-18]. When this interfacial functionality is composed of cationic transition metal complexes, a valuable new class of anion exchange material came into being [19]. Yoshitake and co-workers, have extended this concept to include other transition metal cations in similar cationic complexes inside mesoporous silica [20-23]. Other amine-based ligands (including polymer-based systems) were also explored, and the highest binding capacity was found with the diethylenetriamine ligand [20]. This synthetic strategy allows the chemist to easily modify both the metal center and ligand field, thereby tailoring chemical selectivity at multiple levels.

  17. Magnetic properties of mesoporous cobalt-silica-alumina ternary mixed oxides

    SciTech Connect

    Pal, Nabanita; Seikh, Md. Motin; Bhaumik, Asim

    2013-02-15

    Mesoporous cobalt-silica-alumina mixed oxides with variable cobalt content have been synthesized through slow evaporation method by using Pluronic F127 non-ionic surfactant as template. N{sub 2} sorption analysis of the template-free mixed oxide samples revealed that these mesoporous materials have high BET surface areas together with large mesopores. Powder XRD, TEM, EDS, FT IR and EPR spectroscopic analysis have been employed to understand the nature of the mesophases, bonding and composition of the materials. Low temperature magnetic measurements of these mixed oxide materials show the presence of ferromagnetic correlation at elevated temperature though at low temperature paramagnetic to ferrimagnetic transition is observed. Highlights: Black-Right-Pointing-Pointer Mesoporous cobalt-silica-alumina ternary mixed oxides. Black-Right-Pointing-Pointer High surface area and mesoporosity in magnetic materials. Black-Right-Pointing-Pointer Ferromagnetic correlation at elevated temperature. Black-Right-Pointing-Pointer Low temperature paramagnetic to ferrimagnetic transition.

  18. Highly efficient VOx/SBA-15 mesoporous catalysts for oxidative dehydrogenation of propane.

    PubMed

    Liu, Yong-Mie; Cao, Yong; Zhu, Ka-Ke; Yan, Shi-Run; Dai, Wei-Lin; He, He-Yong; Fan, Kang-Nian

    2002-12-01

    Highly dispersed vanadia species on SBA-15 mesoporous silica have been found to exhibit a highly efficient catalytic performance for the oxidative dehydrogenation (ODH) of propane to light olefins (propene + ethylene). PMID:12478769

  19. Synthesis of Mesoporous Aluminophosphates as Potential Catalysts in the Upgrading Petroleum Feedstocks

    SciTech Connect

    Ingram, Conrad, PH.D.

    2002-03-20

    This project focuses on the synthesis of mesoporous aluminophosphate (AlPO) catalysts for application in the acid catalyzed conversion of large petroleum feedstock compounds to Useful middle distillates and naphtha transportation fuels.

  20. Mesoporous silica film from a solution containing a surfactant and methods of making same

    DOEpatents

    Liu, Jun [West Richland, WA; Domansky, Karel [Cambridge, MA; Li, Xiaohong [Richland, WA; Fryxell, Glen E [Kennewick, WA; Baskaran, Suresh [Kennewick, WA; Kohler, Nathan J [Richland, WA; Thevuthasan, Suntharampillai [Kennewick, WA; Coyle, Christopher A [Richland, WA; Birnbaum, Jerome C [Richland, WA

    2001-12-11

    The present invention is a mesoporous silica film having a low dielectric constant and method of making having the steps of combining a surfactant in a silica precursor solution, spin-coating a film from this solution mixture, forming a partially hydroxylated mesoporous film, and dehydroxylating the hydroxylated film to obtain the mesoporous film. It is advantageous that the small polyoxyethylene ether surfactants used in spin-coated films as described in the present invention will result in fine pores smaller on average than about 20 nm. The resulting mesoporous film has a dielectric constant less than 3, which is stable in moist air with a specific humidity. The present invention provides a method for superior control of film thickness and thickness uniformity over a coated wafer, and films with low dielectric constant.

  1. Synthesis of mesoporous maghemite with high surface area and its adsorptive properties

    NASA Astrophysics Data System (ADS)

    Asuha, S.; Zhao, Y. M.; Zhao, S.; Deligeer, W.

    2012-07-01

    Mesoporous maghemite (γ-Fe2O3) with high surface area was prepared by the thermal decomposition of Fe-urea complex ([Fe(CON2H4)6](NO3)3) with the aid of cetyltrimethyl ammonium bromide (CTAB), and its adsorption ability for the removal of fluoride was investigated. X-ray diffraction (XRD), nitrogen adsorption-desorption measurements, transmission electron micrograph (TEM) observations, and magnetic measurements show that the γ-Fe2O3 has a mesoporous structure and its crystallite size, specific surface area, and magnetic properties can be controlled by varying the content of CTAB in [Fe(CON2H4)6](NO3)3. The maximum adsorption capacity of the mesoporous γ-Fe2O3 for fluoride is estimated to be 7.9 mg/g, which suggests that the mesoporous γ-Fe2O3 is an excellent adsorbent for fluoride.

  2. FINAL REPORT. ACTINIDE-SPECIFIC INTERFACIAL CHEMISTRY OF MONOLAYER COATED MESOPOROUS CERAMICS

    EPA Science Inventory

    The objective of this program was the design, synthesis and evaluation of high-efficiency, high-capacity sorbent materials capable of selectively sequestering actinides and other radionuclides from complex aqueous mixtures. Self-assembled monolayers on mesoporous supports (SAMMS)...

  3. Self-Assembly and Compartmentalization of Nanozymes in Mesoporous Silica-Based Nanoreactors.

    PubMed

    Huang, Yanyan; Lin, Youhui; Ran, Xiang; Ren, Jinsong; Qu, Xiaogang

    2016-04-11

    Herein, to mimic complex natural system, polyelectrolyte multilayer (PEM)-coated mesoporous silica nanoreactors were used to compartmentalize two different artificial enzymes. PEMs coated on the surface of mesoporous silica could serve as a permeable membrane to control the flow of molecules. When assembling hemin on the surface of mesoporous silica, the hemin-based mesoporous silica system possessed remarkable peroxidase-like activity, especially at physiological pH, and could be recycled more easily than traditional graphene-hemin nanocompounds. The hope is that these new findings may pave the way for exploring novel nanoreactors to achieve compartmentalization of nanozymes and applying artificial cascade catalytic systems to mimic cell organelles or important biochemical transformations. PMID:26934043

  4. Multicompartment mesoporous silica nanoparticles with branched shapes: an epitaxial growth mechanism.

    PubMed

    Suteewong, Teeraporn; Sai, Hiroaki; Hovden, Robert; Muller, David; Bradbury, Michelle S; Gruner, Sol M; Wiesner, Ulrich

    2013-04-19

    Mesoporous nanomaterials have attracted widespread interest because of their structural versatility for applications including catalysis, separation, and nanomedicine. We report a one-pot synthesis method for a class of mesoporous silica nanoparticles (MSNs) containing both cubic and hexagonally structured compartments within one particle. These multicompartment MSNs (mc-MSNs) consist of a core with cage-like cubic mesoporous morphology and up to four branches with hexagonally packed cylindrical mesopores epitaxially growing out of the cubic core vertices. The extent of cylindrical mesostructure growth can be controlled via a single additive in the synthesis. Results suggest a path toward high levels of architectural complexity in locally amorphous, mesostructured nanoparticles, which could enable tuning of different pore environments of the same particle for specific chemistries in catalysis or drug delivery. PMID:23599490

  5. Synthesis and characterization of nanoparticulate MnS within the pores of mesoporous silica

    NASA Astrophysics Data System (ADS)

    Barry, Louse; Copley, Mark; Holmes, Justin D.; Otway, David J.; Kazakova, Olga; Morris, Michael A.

    2007-12-01

    Mesoporous silica was loaded with nanoparticulate MnS via a simple post-synthesis treatment. The mesoporous material that still contained surfactant was passivated to prevent MnS formation at the surface. The surfactant was extracted and a novel manganese ethylxanthate was used to impregnate the pore network. This precursor thermally decomposes to yield MnS particles that are smaller or equal to the pore size. The particles exhibit all three common polymorphs. The passivation treatment is most effective at lower loadings because at the highest loadings (SiO 2:MnS molar ratio of 6:1) large particles (>50 nm) form at the exterior of the mesoporous particles. The integrity of the mesoporous network is maintained through the preparation and high order is maintained. The MnS particles exhibit unexpected ferromagnetism at low temperatures. Strong luminescence of these samples is observed and this suggests that they may have a range of important application areas.

  6. Development and characterization of spin coated oxide films with mesoporous structure

    NASA Astrophysics Data System (ADS)

    Paik, Jong-Ah

    2003-10-01

    Mesoporous materials offer unique opportunities for applications requiring low density and low thermal conductivity due to high porosity with uniform pore size. The diversity of the sol-gel process to modify the inorganic framework around the pore structure extends the application of mesoporous materials to the fields of sensors and catalysis. This dissertation provides the first report in which mesoporous films were adapted for MEMS applications. Mesoporous SiO2 and Al2O3 films were prepared by spin coating using block copolymers as the structure-directing agents. The resulting films were over 50% porous with uniform pore size of 8 nm average diameter (+/-3 nm) and an extremely smooth surface. The unique mesoporous morphology leads to novel behavior including extremely high etching rates and the ability to etch underlying layers. Surface micromachining methods were used to fabricate such MEMS structures as micro bridges, cantilevers and membranes, from the mesoporous oxides. Research studies on spin-coated silica and hybrid organic-inorganic silica films addressed the question of how mesostructures generated from a block copolymer surfactant were affected by processing conditions. The hybrid system was synthesized using a one-step process in which MTES (methyltriethoxysilane) was combined with TEOS (tetraethylorthosilicate). Two separate ternary phase diagrams, one for the silica system and one for the hybrid system, were established. Both a hexagonal and a cubic pore structure were observed depending on the composition of the coating solutions, and high porosity was measured with films located at the transition region between two pore structures. Another topic investigated in this dissertation is the development of mesoporous materials with a crystallized oxide framework. An approach for synthesizing mesoporous alpha-Al2O3 powder was successfully developed. Mesoporous TiO2 films (anatase phase) were also successfully synthesized and these films show resistance to

  7. Biocatalytic approach for polymer synthesis and polymer encapsulation in mesoporous materials

    NASA Astrophysics Data System (ADS)

    Ford, Christy

    The goal of this research is to encapsulate enzymatically synthesized polymers within the pores of mesoporous silica. In order to fully understand the effect of polymer incorporation on mesoporous silica structure, the effect of dopant and polymer on micelle shape, the effect of dopant on the final mesoporous silica structure, and the effect of incorporating polymer within mesoporous silica are investigated. Direct entrapment of aromatic molecules within cationic micelles to ultimately fabricate tailored, functional mesoporous silica/polymer composites is investigated. Specifically, the influence of 4-ethylphenol and aniline on the shape of cetyltrimethylammonium bromide (CTAB) micelles and on the structure of mesoporous silica synthesized via the micellar templating is investigated. Small angle neutron scattering indicates that the dopant affects the micellar size, micellar arrangement, and the domain size over which the arrangement extends. Cryo-TEM offers further insight into the micellar shape. The effect of the dopant-to-surfactant molar ratio on the structure of surfactant-templated mesoporous silica is characterized by x-ray diffraction, transmission electron microscopy, and nitrogen sorption techniques. The mesoporous silica undergoes a transition from hexagonal to lamellar with increasing dopant-to-surfactant molar ratio for both 4-ethylphenol and 2-naphthol, suggesting a possible change in the template morphology. A better understanding of the relation between dopant, micellar shape, and mesoporous structure plays a critical role in the development of polymer-ceramic nanocomposites with novel electrooptical, conductive, and fluorescent properties. A novel method for encapsulating polymers in mesoporous silica is presented. The method involves enzymatic synthesis of polyphenols and polyaromatic amines in micellar aggregates, and subsequently condensing silica at the surfactant-water interface. Thus, poly(4-ethylphenol), poly(2-naphthol), and polyaniline

  8. Stabilizing Surfactant Templated Cylindrical Mesopores in Polymer and Carbon Films through Composite Formation with Silica Reinforcement

    SciTech Connect

    Song, Lingyan; Feng, Dan; Lee, Hae-Jeong; Wang, Chengqing; Wu, Quanyan; Zhao, Dongyuan; Vogt, Bryan D.

    2010-10-22

    A facile approach to maintain the periodic mesostructure of cylindrical pores in polymer-resin and carbon films after thermal template removal is explored through the reactive coassembly of resol (carbon precursor) and tetraethylorthosilicate (silica precursor) with triblock copolymer Pluronic F127. Without silica, a low porosity, disordered film is formed after pyrolysis despite the presence of an ordered mesostructure prior to template removal. However for silica concentration greater than 25 wt %, pyrolysis at 350 C yields a mesoporous silica-polymer film with well-defined pore mesostructure. These films remain well ordered upon carbonization at 800 C. In addition to the mesostructural stability, the addition of silica to the matrix impacts other morphological characteristics. For example, the average pore size and porosity of the films increase from 3.2 to 7.5 nm and 12 to 45%, respectively, as the concentration of silica in the wall matrix increases from 0 to 32 wt %. The improved thermal stability of the ordered mesostructure with the addition of silica to the matrix is attributed to the reinforcement of the mechanical properties leading to resistance to stress induced collapse of the mesostructure during template removal.

  9. Mesoporous silica-supported lipid bilayers (protocells) for DNA cargo delivery to the spinal cord.

    PubMed

    Dengler, Ellen C; Liu, Juewen; Kerwin, Audra; Torres, Sergio; Olcott, Clara M; Bowman, Brandi N; Armijo, Leisha; Gentry, Katherine; Wilkerson, Jenny; Wallace, James; Jiang, Xingmao; Carnes, Eric C; Brinker, C Jeffrey; Milligan, Erin D

    2013-06-10

    Amorphous mesoporous silica nanoparticles ('protocells') that support surface lipid bilayers recently characterized in vitro as carrier constructs for small drug and DNA delivery are reported here as highly biocompatible both in vitro and in vivo, involving the brain and spinal cord following spinal delivery into the lumbosacral subarachnoid space (intrathecal; i.t.). Specifically, positively charged, 1, 2-Dioleoyl-3-Trimethylammonium-Propane (DOTAP)-cholesterol (DOTAP:Chol) liposome-formulated protocells revealed stable in vitro cargo release kinetics and cellular interleukin-10 (IL-10) transgene transfection. Recent approaches using synthetic non-viral vector platforms to deliver the pain-suppressive therapeutic transgene, IL-10, to the spinal subarachnoid space have yielded promising results in animal models of peripheral neuropathy, a condition involving aberrant neuronal communication within sensory pathways in the nervous system. Non-viral drug and gene delivery protocell platforms offer potential flexibility because cargo release-rates can be pH-dependent. We report here that i.t. delivery of protocells, with modified chemistry supporting a surface coating of DOTAP:Chol liposomes and containing the IL-10 transgene, results in functional suppression of pain-related behavior in rats for extended periods. This study is the first demonstration that protocell vectors offer amenable and enduring in vivo biological characteristics that can be applied to spinal gene delivery. PMID:23517784

  10. Microwave-induced synthesis of highly dispersed gold nanoparticles within the pore channels of mesoporous silica

    NASA Astrophysics Data System (ADS)

    Gu, Jinlou; Fan, Wei; Shimojima, Atsushi; Okubo, Tatsuya

    2008-04-01

    Highly dispersed gold nanoparticles have been incorporated into the pore channels of SBA-15 mesoporous silica through a newly developed strategy assisted by microwave radiation (MR). The sizes of gold are effectively controlled attributed to the rapid and homogeneous nucleation, simultaneous propagation and termination of gold precursor by MR. Diol moieties with high dielectric and dielectric loss constants, and hence a high microwave activation, were firstly introduced to the pore channels of SBA-15 by a simple addition reaction between amino group and glycidiol and subsequently served as the reduction centers for gold nanoparticles. Extraction of the entrapped gold from the nanocomposite resulted in milligram quantities of gold nanoparticles with low dispersity. The successful assembly process of diol groups and formation of gold nanoparticles were monitored and tracked by solid-state NMR and UV-vis measurements. Characterization by small angle X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the incorporation of gold nanoparticles would not breakup the structural integrity and long-range periodicity of SBA-15. The gold nanoparticles had a narrow size distribution with diameters in the size range of 5-10 nm through TEM observation. The average particles size is 7.9 nm via calculation by the Scherrer formula and TEM measurements. Nitrogen adsorption and desorption isotherms gave further evidence that the employed method was efficient and gold nanoparticles were successfully incorporated into the pore channels of SBA-15.

  11. Self-assembled chromophores within mesoporous nanocrystalline TiO2: towards biomimetic solar cells.

    PubMed

    Marek, Peter L; Sieger, Hermann; Scherer, Torsten; Hahn, Horst; Balaban, Teodor Silviu

    2009-06-01

    Artificial light-harvesting antennas consisting of self-assembled chromophores that mimic the natural pigments of photosynthetic bacteria have been inserted into voids induced in porous titania (TiO2, anatase) in order to investigate their suitability for hybrid solar cells. Mesoporous nanocrystalline TiO2 with additional uniform macropores was treated with precursor solutions of the pigment which was then induced to self-assemble within the voids. The chromophores were tailored to combine the self-assembly characteristics of the natural bacteriochlorophylls with the robustness of artificial Zn-porphyrins being stable for prolonged periods even upon heating to over 200 degrees C. They assemble on the TiO2 surface to form nano- to micro-crystalline structures with lengths from tens of nm up to several microm and show a photosensitization effect which is supposed to be dependent on the assembly size. The natural examples of these antennas are found in green sulfur bacteria which are able to use photosynthesis in deep water regions with minute light intensities. The implementation of biomimetic antennas for light harvesting and a better photon management may lead to a rise in efficiency of dye-sensitized solar cells also under low light illumination conditions. PMID:19504907

  12. Corrosion behavior of mesoporous bioglass-ceramic coated magnesium alloy under applied forces.

    PubMed

    Zhang, Feiyang; Cai, Shu; Xu, Guohua; Shen, Sibo; Li, Yan; Zhang, Min; Wu, Xiaodong

    2016-03-01

    In order to research the corrosion behavior of bioglass-ceramic coated magnesium alloys under applied forces, mesoporous 45S5 bioactive glass-ceramic (45S5 MBGC) coatings were successfully prepared on AZ31 substrates using a sol-gel dip-coating technique followed by a heat treatment at the temperature of 400°C. In this work, corrosion behavior of the coated samples under applied forces was characterized by electrochemical tests and immersion tests in simulated body fluid. Results showed that the glass-ceramic coatings lost the protective effects to the magnesium substrate in a short time when the applied compressive stress was greater than 25MPa, and no crystallized apatite was formed on the surface due to the high Mg(2+) releasing and the peeling off of the coatings. Whereas, under low applied forces, apatite deposition and crystallization on the coating surface repaired cracks to some extent, thus improving the corrosion resistance of the coated magnesium during the long-term immersion period. PMID:26703229

  13. Mesoporous silica-supported lipid bilayers (protocells) for DNA cargo delivery to the spinal cord

    PubMed Central

    Dengler, Ellen C.; Liu, Juewen; Kerwin, Audra; Torres, Sergio; Olcott, Clara M.; Bowman, Brandi N.; Armijo, Leisha; Gentry, Katherine; Wilkerson, Jenny; Wallace, James; Jiang, Xingmao; Carnes, Eric C.; Brinker, C. Jeffrey; Milligan, Erin D.

    2013-01-01

    Amorphous mesoporous silica nanoparticles (‘protocells’) that support surface lipid bilayers recently characterized in vitro as carrier constructs for small drug and DNA delivery are reported here as highly biocompatible both in vitro and in vivo, involving the brain and spinal cord following spinal delivery into the lumbosacral subarachnoid space (intrathecal; i.t.). Specifically, positively charged, 1, 2-Dioleoyl-3-Trimethylammonium-Propane (DOTAP) -cholesterol (DOTAP:Chol) liposome-formulated protocells revealed stable in vitro cargo release kinetics and cellular interleukin-10 (IL-10) transgene transfection. Recent approaches using synthetic non-viral vector platforms to deliver the pain-suppressive therapeutic transgene, IL-10, to the spinal subarachnoid space has yielded promising results in animal models of peripheral neuropathy, a condition involving aberrant neuronal communication within sensory pathways in the nervous system. Non-viral drug and gene delivery protocell platforms offer potential flexibility because cargo release-rates can be pH-dependent. We report here that i.t. delivery of protocells, with modified chemistry supporting a surface coating of DOTAP:Chol liposomes and containing the IL-10 transgene, results in functional suppression of pain-related behavior in rats for extended periods. This study is the first demonstration that protocell vectors offer amenable and enduring in vivo biological characteristics that can be applied to spinal gene delivery. PMID:23517784

  14. Morphology and photocatalysis of mesoporous titania thin films annealed in different atmosphere for degradation of methyl orange

    NASA Astrophysics Data System (ADS)

    Ma, Qing; Qin, Tian Pang; Liu, Shao Jun; Weng, Lv Qian; Dong, Wen Yi

    2011-07-01

    The effect of different annealing atmosphere on the morphology and photocatalytic activity of mesoporous TiO2 thin films by dip-coating technique is investigated. The annealing temperature and atmosphere causes significant change of the morphology, thermal stability, photoluminescence, and photocatalytic properties of mesoporous TiO2 films. As-prepared mesoporous thin films have an amorphous structure that is transformed to crystalline TiO2 with well-maintained mesoporous structure at 450°C in various annealing atmosphere except that the mesoporous structure is fully destroyed for films annealed in air. Films annealed in N2 show the enhanced UV photodegradation of methyl orange (MO) resulting from the enhanced crystallinity in these films evidenced by XRD and Raman spectra. These findings can be used to tailor the structure and morphology of mesoporous TiO2 films and thus improve their photocatalytic activity for efficient removal of dye effluents in wastewater.

  15. Mesoporous Aluminosilicate Catalysts for the Selective Isomerization of n-Hexane: The Roles of Surface Acidity and Platinum Metal.

    PubMed

    Musselwhite, Nathan; Na, Kyungsu; Sabyrov, Kairat; Alayoglu, Selim; Somorjai, Gabor A

    2015-08-19

    Several types of mesoporous aluminosilicates were synthesized and evaluated in the catalytic isomerization of n-hexane, both with and without Pt nanoparticles loaded into the mesopores. The materials investigated included mesoporous MFI and BEA type zeolites, MCF-17 mesoporous silica, and an aluminum modified MCF-17. The acidity of the materials was investigated through pyridine adsorption and Fourier Transform-Infrared Spectroscopy (FT-IR). It was found that the strong Brönsted acid sites in the micropores of the zeolite catalysts facilitated the cracking of hexane. However, the medium strength acid sites on the Al modified MCF-17 mesoporous silica greatly enhanced the isomerization reaction. Through the loading of different amounts of Pt into the mesopores of the Al modified MCF-17, the relationship between the metal nanoparticles and acidic sites on the support was revealed. PMID:26168190

  16. Synthesis and microwave absorbing properties of FeNi alloy incorporated ordered mesoporous carbon-silica nanocomposite

    NASA Astrophysics Data System (ADS)

    Li, Guoxian; Guo, Yunxia; Sun, Xin; Wang, Tao; Zhou, Jianhua; He, Jianping

    2012-11-01

    Ordered mesoporous carbon-silica/FeNi nanocomposite were prepared by a sol-gel method and following sintering process. The electromagnetic parameters were measured in the 0.5-18 GHz range. Compared with ordered mesoporous carbon-silica composite, the permittivity of ordered mesoporous carbon-silica/FeNi nanocomposite decreases, while the permeability almost remains unchanged. The optimal reflection loss of ordered mesoporous carbon-silica/FeNi nanocomposite can reach -45.6 dB at 11.1 GHz for a layer thickness of 3.0 mm. The enhanced microwave absorption of the mesoporous carbon-silica/FeNi nanocomposite is due to better balance between the complex permittivity and permeability, geometrical effect, as well as multiple reflections by the ordered mesoporous structure.

  17. Mixed surfactants-directed the mesoporous silica materials with various morphologies and structures

    SciTech Connect

    Lin Huiming; Qu Fengyu; Wu Xiang; Xue Ming; Zhu Guangshan; Qiu Shilun

    2011-06-15

    A new mixed surfactants system using alkyl carboxylic acids and quaternized poly[bis(2-chloroethyl)ether-alt-1,3-bis[3-(dimethylamino)propyl] urea] (PEPU) as the co-template was used to synthesize mesoporous silica materials with various morphologies and structures, including flakes, regular spheres, nanoparticles, and tube-spheres. The cationic polymer connected the anionic surfactant micelle to the anionic polysilicate species to induce the synthesis of the mesoporous silica materials. The structure and property of the surfactant and the cationic polymer determined the formation of mesoporous silica, and also had a signification influence on the morphology and structure of the final materials. To further explore the possible formation mechanism of these mesoporous materials, zeta potential was utilized to evaluate the interaction between the anionic surfactant and the cationic co-template. In addition, the structure, morphology, and porosity of these materials were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N{sub 2} adsorption-desorption measurements. - Graphical abstract: A new mixed surfactants system using alkyl carboxylic acids and PEPU as the co-template was used to synthesize mesoporous silica materials with various morphologies and structures. Highlights: {yields}A new mixed surfactants system induced the mesoporous silica materials with various morphologies and structure. > It is a development of the type S{sup -}N{sup +}I{sup -} route of the mesoporous formation. > Zeta potential was utilized to evaluate the interaction between the anionic surfactant and the cationic co-template. > The property and amount of surfactant and polymer determined the formation of the mesoporous materials.

  18. Ordered mesoporous CoMOx (M = Al or Zr) mixed oxides for Fischer-Tropsch synthesis.

    PubMed

    Ahn, Chang-Il; Lee, Yun Jo; Um, Soong Ho; Bae, Jong Wook

    2016-04-01

    A superior structural stability of the ordered mesoporous CoMOx synthesized by using the KIT-6 template was observed under Fischer-Tropsch reaction conditions. The enhanced stability was attributed to a strong interaction of the irreducible metal oxides with the mesoporous Co3O4 by forming Co3O4-ZrO2 (or Co3O4-Al2O3), which resulted in showing a stable activity. PMID:26963504

  19. Synthesis, characterization, and CO(2) adsorptive behavior of mesoporous AlOOH-supported layered hydroxides.

    PubMed

    Chang, Yen-Po; Chen, Yu-Chun; Chang, Po-Hsueh; Chen, San-Yuan

    2012-07-01

    A novel CO(2) solid sorbent was prepared by synthesizing and modifying AlOOH-supported CaAl layered double hydroxides (CaAl LDHs), which were prepared by using mesoporous alumina (γ-Al(2)O(3)) and calcium chloride (CaCl(2)) in a hydrothermal urea reaction. The nanostructured CaAl LDHs with nanosized platelets (3-30 nm) formed and dispersed inside the crystalline framework of mesoporous AlOOH (boehmite). By calcination of AlOOH-supported LDHs at 700 °C, the mesoporous CaAl metal oxides exhibited ordered hexagonal mesoporous arrays or uniform nanotubes with a large surface area of 273 m(2) g(-1) , a narrow pore size distribution of 6.2 nm, and highly crystalline frameworks. The crystal structure of the calcined mesoporous CaAl metal oxides was multiphasic, consisting of CaO/Ca(OH)(2), Al(2)O(3), and CaAlO mixed oxides. The mesoporous metal oxides were used as a solid sorbent for CO(2) adsorption at high temperatures and displayed a maximum CO(2) capture capacity (≈45 wt %) of the sorbent at 650 °C. Furthermore, it was demonstrated that the mesoporous CaAl oxides showed a more rapid adsorption rate (for 1-2 min) and longer cycle life (weight change retention: 80 % for 30 cycles) of the sorbent because of the greater surface area and increased number of activated sites in the mesostructures. A simple model for the formation mechanism of mesoporous metal oxides is tentatively proposed to account for the synergetic effect of CaAl LDHs on the adsorption of CO(2) at high temperature. PMID:22488944

  20. Synthesis of attrition-resistant heterogeneous catalysts using templated mesoporous silica

    DOEpatents

    Pham, Hien N.; Datye, Abhaya K.

    2003-04-15

    The present invention relates to catalysts in mesoporous structures. In a preferred embodiment, the invention comprises a method for encapsulating a dispersed insoluble compound in a mesoporous structure comprising combining a soluble oxide precursor, a solvent, and a surfactant to form a mixture; dispersing an insoluble compound in the mixture; spray-drying the mixture to produce dry powder; and calcining the powder to yield a porous structure comprising the dispersed insoluble compound.

  1. Synthesis and Characterization of Mesoporous Silica Functionalized with Calix[4]arene Derivatives

    PubMed Central

    Alahmadi, Sana M.; Mohamad, Sharifah; Maah, Mohd Jamil

    2012-01-01

    This work reports a new method to covalently attach calix[4]arene derivatives onto MCM-41, using a diisocyanate as a linker. The modified mesoporous silicates were characterized by fourier transform infrared spectroscopy (FTIR), thermal analysis (TGA) and elemental analysis. The FTIR spectra and TGA analysis verified that the calix[4]arene derivates are covalently attached to the mesoporous silica. The preservation of the MCM-41 channel system was checked by X-ray diffraction and nitrogen adsorption analysis. PMID:23202977

  2. Controlling stability of gold nanoparticles in mesoporous silica

    NASA Astrophysics Data System (ADS)

    Bore, Mangesh Tukaram

    Metal particles deposited on oxide supports are used extensively as heterogeneous catalysts. By using a suitable combination of active metal phases and supports, the catalysts are designed for high activity, selectivity and mechanical strength. However, catalysts undergo deactivation, with poisoning, fouling, sintering and volatilization being some of the common reasons for loss of catalyst activity. For supported metal catalysts, sintering of metal particles is a major cause of catalyst deactivation. The rate and extent of sintering of supported metals depends upon temperature, atmosphere, support, promoter and metal. It is known that gold nanoparticles show high reactivity for CO oxidation at low temperature, but only when the Au particles are very small (<5 nm). Gold nanoparticles supported on silica show rapid sintering at 200°C--400°C. Porosity of support could play an important role in controlling the sintering of metal particles. But the role of pore size, pore curvature and structure is difficult to study with conventional supported metal catalysts. Surfactant templated mesoporous silica is a promising support material since it provides well defined pores of uniform size and structure. Hence, these silica supports provide ideal model systems for control of nanoparticle sintering. Limitations of mesoporous silica are its low hydrothermal stability at elevated temperatures and its inert nature. The pores of mesoporous silica reportedly collapse at temperatures above 500°C and gold nanoparticles supported on reducible oxides such as TiO2, CO3O4 and Fe2O 3 are more active compared to pure silica for CO oxidation. In this work highly dispersed gold nanoparticles (<2 nm) were prepared within the pores of silica with pore sizes ranging from 2.2 nm to 6.5 nm and differing pore architecture (2D-hexagonal, 3D-hexagonal, cubic and pores coiled-up in spherical geometry). In the 2D-hexagonal pore structure, the pores are one dimensional and terminate on the particle

  3. Synthesis of Ordered Mesoporous Phenanthrenequinone-Carbon via π-π Interaction-Dependent Vapor Pressure for Rechargeable Batteries

    PubMed Central

    Kwon, Mi-Sook; Choi, Aram; Park, Yuwon; Cheon, Jae Yeong; Kang, Hyojin; Jo, Yong Nam; Kim, Young-Jun; Hong, Sung You; Joo, Sang Hoon; Yang, Changduk; Lee, Kyu Tae

    2014-01-01

    The π-π interaction-dependent vapour pressure of phenanthrenequinone can be used to synthesize a phenanthrenequinone-confined ordered mesoporous carbon. Intimate contact between the insulating phenanthrenequinone and the conductive carbon framework improves the electrical conductivity. This enables a more complete redox reaction take place. The confinement of the phenanthrenequinone in the mesoporous carbon mitigates the diffusion of the dissolved phenanthrenequinone out of the mesoporous carbon, and improves cycling performance. PMID:25490893

  4. Utilization of a By-product Produced from Oxidative Desulfurization Process over Cs-Mesoporous Silica Catalysts

    SciTech Connect

    Kim, Hyeonjoo; Jeong, Kwang Eun; Jeong, Soon-Yong; Park, Young-Kwon; Kim, Do Heui; Jeon, Jong Ki

    2011-02-28

    We investigated the use of Cs-mesoporous silica catalysts to upgrade a by-product of oxidative desulfurization (ODS). Cs-mesoporous silica catalysts were chaeacterized through N2 adsorption, XRD, CO2-temperature-programmed desorption, and XRF. Cs-mesoporous silica prepared by the direct incorporation method showed higher catalytic performance than a Cs/MCM-41 catalyst by impregnation method for the catalytic decomposition of sulfone compounds produced from ODS process.

  5. General and controllable synthesis of novel mesoporous magnetic iron oxide@carbon encapsulates for efficient arsenic removal.

    PubMed

    Wu, Zhangxiong; Li, Wei; Webley, Paul A; Zhao, Dongyuan

    2012-01-24

    A facile ammonia-atmosphere pre-hydrolysis post-synthetic route that can uniformly and selectively deposit Fe(2) O(3) nanoparticles in the predefined mesopores (5.6 nm) of a bimodal (2.3, 5.6 nm) mesoporous carbon matrix is demonstrated. The mesoporous magnetic Fe(2) O(3) @C encapsulates show excellent performance for arsenic capture with remarkable adsorption capacity, fast uptake rate, easy magnetic separation, and good cyclic stability. PMID:22213225

  6. Synthesis, characterization, and application of surface-functionalized ordered mesoporous nanoparticles

    SciTech Connect

    Chung, Po-Wen

    2009-12-15

    The dissertation begins with Chapter 1, which is a general introduction of the fundamental synthesis of mesoporous silica materials, the selective functionlization of mesoporous silica materials, and the synthesis of nanostructured porous materials via nanocasting. In Chapter 2, the thermo-responsive polymer coated mesoporous silica nanoparticles (MSN) was synthesized via surface-initated polymerization and exhibited unique partition activities in a biphasic solution with the thermally induced change. In Chapter 3, the monodispersed spherical MSN with different mesoporous structure (MCM-48) was developed and employed as a template for the synthesis of mesoporous carbon nanoparticles (MCN) via nanocasting. MCN was demonstrated for the delivery of membrane impermeable chemical agents inside the cells. The cellular uptake efficiency and biocompabtibility of MCN with human cervical cancer cells were also investigated. In addition to the biocompabtibility of MCN, MCN was demonstrated to support Rh-Mn nanoparticles for catalytic reaction in Chapter 4. Owing to the unique mesoporosity, Rh-Mn nanoparticles can be well distributed inside the mesoporous structure and exhibited interesting catalytic performance on CO hydrogenation. In Chapter 5, the synthesis route of the aforementioned MCM-48 MSN was discussed and investigated in details and other metal oxide nanoparticles were also developed via nanocasting by using MCM-48 MSN as a template. At last, there is a general conclusion summarized in Chapter 6.

  7. Monodisperse spherical mesoporous silica particles: fast synthesis procedure and fabrication of photonic-crystal films

    NASA Astrophysics Data System (ADS)

    Trofimova, E. Yu; Kurdyukov, D. A.; Yakovlev, S. A.; Kirilenko, D. A.; Kukushkina, Yu A.; Nashchekin, A. V.; Sitnikova, A. A.; Yagovkina, M. A.; Golubev, V. G.

    2013-04-01

    A procedure for the synthesis of monodisperse spherical mesoporous silica particles (MSMSPs) via the controlled coagulation of silica/surfactant clusters into spherical aggregates with mean diameters of 250-1500 nm has been developed. The synthesis is fast (taking less than 1 h) because identical clusters are simultaneously formed in the reaction mixture. The results of microscopic, x-ray diffraction, adsorption and optical measurements allowed us to conclude that the clusters are ˜15 nm in size and have hexagonally packed cylindrical pore channels. The channel diameters in MSMSPs obtained with cethyltrimethylammonium bromide and decyltrimethylammonium bromide as structure-directing agents were 3.1 ± 0.15 and 2.3 ± 0.12 nm, respectively. The specific surface area and the pore volume of MSMSP were, depending on synthesis conditions, 480-1095 m2 g-1 and 0.50-0.65 cm3 g-1. The MSMSP were used to grow opal-like photonic-crystal films possessing a hierarchical macro-mesoporous structure, with pores within and between the particles. A selective filling of mesopore channels with glycerol, based on the difference between the capillary pressures in macro- and mesopores, was demonstrated. It is shown that this approach makes it possible to control the photonic bandgap position in mesoporous opal films by varying the degree of mesopore filling with glycerol.

  8. Supported mesoporous carbon ultrafiltration membrane and process for making the same

    DOEpatents

    Strano, Michael; Foley, Henry C.; Agarwal, Hans

    2004-04-13

    A novel supported mesoporous carbon ultrafiltration membrane and process for producing the same. The membranes comprise a mesoporous carbon layer that exists both within and external to the porous support. A liquid polymer precursor composition comprising both carbonizing and noncarbonizing templating polymers is deposited on the porous metal support. The coated support is then heated in an inert-gas atmosphere to pyrolyze the polymeric precursor and form a mesoporous carbon layer on and within the support. The pore-size of the membranes is dependent on the molecular weight of the noncarbonizing templating polymer precursor. The mesoporous carbon layer is stable and can withstand high temperatures and exposure to organic chemicals. Additionally, the porous metal support provides excellent strength properties. The composite structure of the membrane provides novel structural properties and allows for increased operating pressures allowing for greater membrane flow rates. The invention also relates to the use of the novel ultrafiltration membrane to separate macromolecules from solution. An example is shown separating bovine serum albumin from water. The membrane functions by separating and by selective adsorption. Because of the membrane's porous metal support, it is well suited to industrial applications. The unique properties of the supported mesoporous carbon membrane also allow the membrane to be used in transient pressure or temperature swing separations processes. Such processes were not previously possible with existing mesoporous membranes. The present invention, however, possesses the requisite physical properties to perform such novel ultrafiltration processes.

  9. Enhancing adsorption efficiency of dichloroacetic acid onto mesoporous carbons: Procedure optimization, mechanism and characterization.

    PubMed

    Ding, Ying; Zhu, Jianzhong; Ji, Dongliang; Cao, Yang; Ling, Xiaojia; Chen, Wei

    2015-08-15

    Highly ordered mesoporous carbon may be directly synthesized via supramolecular self-assembly with in situ evaporation-induced crystallization process by controlling thermal reaction temperatures and carbon mass loading. In the present study, the effects of thermal reaction temperatures on the structural characterization and adsorption capacity of mesoporous carbon have been investigated and analyzed with orthogonal test experiments. The results show the carbonization temperature (R=32.1) plays a more important role than the self-assembly temperature (R=8.5) and thermal polymerization temperature (R=10.1) in manipulating the pore texture structures. The optimization grouping temperature was 40-110-500 °C. The optimum mesoporous carbon sample had the highest BET specific surface area (474 m(2)/g), the largest pore volume (0.46 cm(3)/g), and with reasonable uniform pore size distribution. The adsorption evaluation also shows the adsorption capacity is strongly correlated with the pore structure of mesoporous carbon, the optimized mesoporous carbon sample displayed the largest adsorption capacity (350 mg/g) at an initial concentration of 20.0 mg/L of dichloroacetic acid. The study results indicate optimization of thermal reaction parameters is an effective approach for synthesis of ordered mesoporous carbons. PMID:25935284

  10. Applications of mesoporous materials as excipients for innovative drug delivery and formulation.

    PubMed

    Shen, Shou-Cang; Ng, Wai Kiong; Chia, Leonard Sze Onn; Dong, Yuan-Cai; Tan, Reginald Beng Hee

    2013-01-01

    Due to uniquely ordered nanoporous structure and high surface area as well as large pore volume, mesoporous materials have exhibited excellent performance in both controlled drug delivery with sustained release profiles and formulation of poorly aqueoussoluble drugs with enhanced bioavailability. Compared with other bulk excipients, mesoporous materials could achieve a higher loading of active ingredients and a tunable drug release profile, as the high surface density of surface hydroxyl groups offered versatility to be functionalized. With drug molecules stored in nano sized channels, the pore openings could be modified using functional polymers or nano-valves performing as stimuli-responsive release devices and the drug release could be triggered by environmental changes or other external effects. In particular, mesoporous silica nanoparticles (MSN) have attracted much attention for application in functional target drug delivery to the cancer cell. The smart nano-vehicles for drug delivery have showed obvious improvements in the therapeutic efficacy for tumor suppression as compared with conventional sustained release systems, although further progress is still needed for eventual clinical applications. Alternatively, unmodified mesoporous silica also exhibited feasible application for direct formulation of poorly water-soluble drugs to enhance dissolution rate, solubility and thus increase the bioavailability after administration. In summary, mesoporous materials offer great versatility that can be used both for on-demand oral and local drug delivery, and scientists are making great efforts to design and fabricate innovative drug delivery systems based on mesoporous drug carriers. PMID:23470004

  11. Bone tissue engineering using silica-based mesoporous nanobiomaterials:Recent progress.

    PubMed

    Shadjou, Nasrin; Hasanzadeh, Mohammad

    2015-10-01

    Bone disorders are of significant concern due to increase in the median age of our population. It is in this context that tissue engineering has been emerging as a valid approach to the current therapies for bone regeneration/substitution. Tissue-engineered bone constructs have the potential to alleviate the demand arising from the shortage of suitable autograft and allograft materials for augmenting bone healing. Silica based mesostructured nanomaterials possessing pore sizes in the range 2-50 nm and surface reactive functionalities have elicited immense interest due to their exciting prospects in bone tissue engineering. In this review we describe application of silica-based mesoporous nanomaterials for bone tissue engineering. We summarize the preparation methods, the effect of mesopore templates and composition on the mesopore-structure characteristics, and different forms of these materials, including particles, fibers, spheres, scaffolds and composites. Also, the effect of structural and textural properties of mesoporous materials on development of new biomaterials for production of bone implants and bone cements was discussed. Also, application of different mesoporous materials on construction of manufacture 3-dimensional scaffolds for bone tissue engineering was discussed. It begins by giving the reader a brief background on tissue engineering, followed by a comprehensive description of all the relevant components of silica-based mesoporous biomaterials on bone tissue engineering, going from materials to scaffolds and from cells to tissue engineering strategies that will lead to "engineered" bone. PMID:26117771

  12. Membrane interactions of mesoporous silica nanoparticles as carriers of antimicrobial peptides.

    PubMed

    Braun, Katharina; Pochert, Alexander; Lindén, Mika; Davoudi, Mina; Schmidtchen, Artur; Nordström, Randi; Malmsten, Martin

    2016-08-01

    Membrane interactions are critical for the successful use of mesoporous silica nanoparticles as delivery systems for antimicrobial peptides (AMPs). In order to elucidate these, we here investigate effects of nanoparticle charge and porosity on AMP loading and release, as well as consequences of this for membrane interactions and antimicrobial effects. Anionic mesoporous silica particles were found to incorporate considerable amounts of the cationic AMP LLGDFFRKSKEKIGKEFKRIVQRIKDFLRNLVPRTES (LL-37), whereas loading is much lower for non-porous or positively charged silica nanoparticles. Due to preferential pore localization, anionic mesoporous particles, but not the other particles, protect LL-37 from degradation by infection-related proteases. For anionic mesoporous nanoparticles, membrane disruption is mediated almost exclusively by peptide release. In contrast, non-porous silica particles build up a resilient LL-37 surface coating due to their higher negative surface charge, and display largely particle-mediated membrane interactions and antimicrobial effects. For positively charged mesoporous silica nanoparticles, LL-37 incorporation promotes the membrane binding and disruption displayed by the particles in the absence of peptide, but also causes toxicity against human erythrocytes. Thus, the use of mesoporous silica nanoparticles as AMP delivery systems requires consideration of membrane interactions and selectivity of both free peptide and the peptide-loaded nanoparticles, the latter critically dependent on nanoparticle properties. PMID:27174622

  13. Direct template synthesis of mesoporous carbon and its application to supercapacitor electrodes

    SciTech Connect

    Yoon, Songhun; Oh, Seung M.; Lee, Chulwee

    2009-08-05

    A direct templating method which is facile, inexpensive and suitable for the large scale production of mesoporous carbon is reported herein. A meso-structure surfactant/silicate template was made in a solution phase and resorcinol-formaldehyde as a carbon precursor was incorporated into the template solution. After aging, carbonization and hydrofluoric acid (HF) etching, mesoporous carbon was obtained. Using X-ray diffraction, scanning and transmission electron microscopy and nitrogen sorption, the synthesis mechanism of the mesoporous carbon was elucidated. According to the small angle X-ray scattering measurements, the surface became smoother after the removal of the silica, indicating that the silica was mostly located at the pore surface of the carbon. Also, the calculation of the pore volume demonstrated that the silica was transferred into the pores of the carbon without structural collapse during HF etching. When the prepared mesoporous carbon was applied to a supercapacitor electrode, the rectangular shape of the cyclic voltammogram was less collapsed, even at a high scan rate, which is indicative of its high rate capability. This was due to the low resistance of the electrolyte in the pores (3.8 {Omega} cm{sup 2}), which was smaller than that of conventional activated carbon electrodes and even comparable to that of ordered mesoporous carbon electrodes. This improved performance was probably due to the well developed mesoporosity and high pore connectivity of the prepared mesoporous carbon.

  14. High performance of phosphonate-functionalized mesoporous silica for U(VI) sorption from aqueous solution.

    PubMed

    Yuan, Li-Yong; Liu, Ya-Lan; Shi, Wei-Qun; Lv, Yu-Long; Lan, Jian-Hui; Zhao, Yu-Liang; Chai, Zhi-Fang

    2011-07-28

    The renaissance of nuclear energy promotes increasing basic research on the separation and enrichment of nuclear fuel associated radionuclides. Herein, we report the first study for developing mesoporous silica functionalized with phosphonate (NP10) as a sorbent for U(VI) sorption from aqueous solution. The mesoporous silica was synthesized by co-condensation of diethylphosphatoethyltriethoxysilane (DPTS) and tetraethoxysilane (TEOS), using cationic surfactant cetyltrimethylammonium bromide (CTAB) as the template. The synthesized silica nanoparticles were observed to possess a mesoporous structure with a uniform pore diameter of 2.7 nm, and to have good stability and high efficiency for U(VI) sorption from aqueous solution. A maximum sorption capacity of 303 mg g(-1) and fast equilibrium time of 30 min were achieved under near neutral conditions at room temperature. The adsorbed U(VI) can be easily desorbed by using 0.1 mol L(-1) HNO(3), and the reclaimed mesoporous silica can be reused with no decrease of sorption capacity. In addition, the preconcentration of U(VI) from a 100 mL aqueous solution using the functionalized mesoporous silica was also studied. The preconcentration factor was found to be as high as 100, suggesting the vast opportunities of this kind of mesoporous silica for the solid-phase extraction and enrichment of U(VI). PMID:21681327

  15. Selenium@mesoporous carbon composite with superior lithium and sodium storage capacity.

    PubMed

    Luo, Chao; Xu, Yunhua; Zhu, Yujie; Liu, Yihang; Zheng, Shiyou; Liu, Ying; Langrock, Alex; Wang, Chunsheng

    2013-09-24

    Selenium-impregnated carbon composites were synthesized by infusing Se into mesoporous carbon at a temperature of 600 °C under vacuum. Ring-structured Se8 was produced and confined in the mesoporous carbon, which acts as an electronic conductive matrix. During the electrochemical process in low-cost LiPF6/EC/DEC electrolyte, low-order polyselenide intermediates formed and were stabilized by mesoporous carbon, which avoided the shuttle reaction of polyselenides. Exceptional electrochemical performance of Se/mesoporous carbon composites was demonstrated in both Li-ion and Na-ion batteries. In lithium-ion batteries, Se8/mesoporous carbon composite cathodes delivered a reversible capacity of 480 mAh g(-1) for 1000 charge/discharge cycles without any capacity loss, while in Na-ion batteries, it provided initial capacity of 485 mAh g(-1) and retained 340 mAh g(-1) after 380 cycles. The Se8/mesoporous carbon composites also showed excellent rate capability. As the current density increased from 0.1 to 5 C, the capacity retained about 46% in Li-ion batteries and 34% in Na-ion batteries. PMID:23944942

  16. A simple large-scale synthesis of mesoporous In2O3 for gas sensing applications

    NASA Astrophysics Data System (ADS)

    Zhang, Su; Song, Peng; Yan, Huihui; Yang, Zhongxi; Wang, Qi

    2016-08-01

    In this paper, large-scale mesoporous In2O3 nanostructures were synthesized by a facile Lewis acid catalytic the furfural alcohol resin (FAR) template route for the high-yield. Their morphology and structure were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential thermal and thermogravimetry analysis (DSC-TG) and the Brunauer-Emmett-Teller (BET) approach. The as-obtained mesoporous In2O3 nanostructures possess excellent mesoporous and network structure, which increases the contact area with the gases, it is conducive for adsorption-desorption of gas on the surface of In2O3. The In2O3 particles and pores were both about 15 nm and very uniform. In gas-sensing measurements with target gases, the gas sensor based on mesoporous In2O3 nanostructures showed a good response, short response-recovery time, good selectivity and stability to ethanol. These properties are due to the large specific surface area of mesoporous structure. This synthetic method could use as a new design concept for functional mesoporous nanomaterials and for mass production.

  17. Impact of nanopore morphology on cell viability on mesoporous polymer and carbon surfaces.

    PubMed

    Chavez, Vicki L; Song, Lingyan; Barua, Sutapa; Li, Xinxin; Wu, Quanyan; Zhao, Dongyuan; Rege, Kaushal; Vogt, Bryan D

    2010-08-01

    Topography at the nanoscale can lead to dramatic changes in the adhesion of cells to surfaces and their subsequent viability. For biological applications, including tissue engineering and cell-based sensing, the large internal surface area of ordered mesoporous carbons provides an opportunity for enhanced sensitivity and performance, but the mesostructure also affects the topography of the material. In this work, we probe the viability and adhesion of osteoblasts on ordered mesoporous materials with different morphologies and matrix chemistries. FDU-15 (hexagonal) and FDU-16 (cubic) films were processed at either 350 degrees C (polymeric) or 800 degrees C (carbon) to provide these different materials. For the films processed at 350 degrees C, the cell adhesion was markedly improved on the mesoporous films in comparison to a dense film analog, consistent with many reports in the literature that nanostructuring of surfaces improves the viability and adhesion of osteoblasts. Conversely, osteoblast adhesion was reduced on the carbonized surfaces processed at 800 degrees C when ordered mesopores were introduced, particularly for the cubic mesostructure (FDU-16). We attribute the decrease in cell adhesion to the propensity of the ordered mesoporous carbon films to sorb organics from aqueous solution, which could lead to removal of adhesion-promoting compounds at the film surface. These results suggest that cell viability on mesoporous polymer and carbon films can be controlled through simple changes in the pyrolysis temperature. PMID:20144750

  18. Phosphate adsorption on aluminum-impregnated mesoporous silicates: surface structure and behavior of adsorbents.

    PubMed

    Shin, Eun Woo; Han, James S; Jang, Min; Min, Soo-Hong; Park, Jae Kwang; Rowell, Roger M

    2004-02-01

    Phosphorus from excess fertilizers and detergents ends up washing into lakes, creeks, and rivers. This overabundance of phosphorus causes excessive aquatic plant and algae growth and depletes the dissolved oxygen supply in the water. In this study, aluminum-impregnated mesoporous adsorbents were tested for their ability to remove phosphate from water. The surface structure of the materials was investigated with X-ray diffraction (XRD), a N2 adsorption-desorption technique, Fourier transform-infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS) to understand the effect of surface properties on the adsorption behavior of phosphate. The mesoporous materials were loaded with Al components by reaction with surface silanol groups. In the adsorption test, the Al-impregnated mesoporous materials showed fast adsorption kinetics as well as high adsorption capacities, compared with activated alumina. The uniform mesopores of the Al-impregnated mesoporous materials caused the diffusion rate in the adsorption process to increase, which in turn caused the fast adsorption kinetics. High phosphate adsorption capacities of the Al-impregnated mesoporous materials were attributed to not only the increase of surface hydroxyl density on Al oxide due to well-dispersed impregnation of Al components but also the decrease in stoichiometry of surface hydroxyl ions to phosphate by the formation of monodentate surface complexes. PMID:14968882

  19. A simple method to ordered mesoporous carbons containing nickel nanoparticles

    SciTech Connect

    Dai, Sheng; Wang, Xiqing

    2009-01-01

    A series of ordered mesoporous carbons containing magnetic Ni nanoparticles (Ni-OMCs) with a variety of Ni loadings was made by a simple one-pot synthetic procedure through carbonization of phenolic resin-Pluronic block copolymer composites containing various amount of nickel nitrate. Such composite materials were characterized by N{sub 2} sorption, XRD, and STEM. Ni-OMCs exhibited high BET surface area, uniform pore size, and large pore volume without obvious pore blockage with a Ni loading as high as 15 wt%. Ni nanoparticles were crystalline with a face-center-cubic phase and observed mainly in the carbon matrix and on the outer surface as well. The average particle size of Ni nanoparticles was dependent on the preparation (carbonization) temperature and Ni loading; the higher the temperature was used and the more the Ni was incorporated, the larger the Ni nanoparticles were observed. One of the applications of Ni-OMCs was demonstrated as magnetically separable adsorbents.

  20. Selective functionalization of the mesopores of SBA-15

    DOE PAGESBeta

    Webb, Jonathan D.; Seki, Tomohiro; Goldston, Jennifer F.; Pruski, Marek; Crudden, Cathleen M.

    2014-10-23

    In this study, a method has been developed that permits the highly selective functionalization of the interior and exterior surfaces of the ubiquitous mesoporous material, SBA-15. The key step is reloading the as-synthesized material with structure-directing agent, Pluronic® P123, prior to selective functionalization of the external surface with a silylating agent. This new approach represents a significant improvement over literature procedures. Results from physisorption analyses as well as solid-state NMR permit a detailed, quantitative assessment of functionalized SBA-15. This work also provides insight into the stability of the silyl layer during extraction procedures – an issue often neglected in othermore » studies but of significant importance as decomposition of this layer could result in the introduction of new silanols and reduce the effectiveness of any selective grafting procedure.« less

  1. Selective functionalization of the mesopores of SBA-15

    SciTech Connect

    Webb, Jonathan D.; Seki, Tomohiro; Goldston, Jennifer F.; Pruski, Marek; Crudden, Cathleen M.

    2014-10-23

    In this study, a method has been developed that permits the highly selective functionalization of the interior and exterior surfaces of the ubiquitous mesoporous material, SBA-15. The key step is reloading the as-synthesized material with structure-directing agent, Pluronic® P123, prior to selective functionalization of the external surface with a silylating agent. This new approach represents a significant improvement over literature procedures. Results from physisorption analyses as well as solid-state NMR permit a detailed, quantitative assessment of functionalized SBA-15. This work also provides insight into the stability of the silyl layer during extraction procedures – an issue often neglected in other studies but of significant importance as decomposition of this layer could result in the introduction of new silanols and reduce the effectiveness of any selective grafting procedure.

  2. Mesoporous-Silica-Functionalized Nanoparticles for Drug Delivery.

    PubMed

    Giret, Simon; Wong Chi Man, Michel; Carcel, Carole

    2015-09-28

    The ever-growing interest for finding efficient and reliable methods for treatment of diseases has set a precedent for the design and synthesis of new functional hybrid materials, namely porous nanoparticles, for controlled drug delivery. Mesoporous silica nanoparticles (MSNPs) represent one of the most promising nanocarriers for drug delivery as they possess interesting chemical and physical properties, thermal and mechanical stabilities, and are biocompatibile. In particular, their easily functionalizable surface allows a large number of property modifications further improving their efficiency in this field. This Concept article deals with the advances on the novel methods of functionalizing MSNPs, inside or outside the pores, as well as within the walls, to produce efficient and smart drug carriers for therapy. PMID:26250991

  3. Improved gene transfer with histidine-functionalized mesoporous silica nanoparticles.

    PubMed

    Brevet, David; Hocine, Ouahiba; Delalande, Anthony; Raehm, Laurence; Charnay, Clarence; Midoux, Patrick; Durand, Jean-Olivier; Pichon, Chantal

    2014-08-25

    Mesoporous silica nanoparticles (MSN) were functionalized with aminopropyltriethoxysilane (MSN-NH2) then L-histidine (MSN-His) for pDNA delivery in cells and in vivo. The complexation of pDNA with MSN-NH2 and MSN-His was first studied with gel shift assay. pDNA complexed with MSN-His was better protected from DNase degradation than with MSN-NH2. An improvement of the transfection efficiency in cells was observed with MSN-His/pDNA compared to MSN-NH2/pDNA, which could be explained by a better internalization of MSN-His. The improvement of the transfection efficiency with MSN-His was also observed for gene transfer in Achilles tendons in vivo. PMID:24853464

  4. Silicalites and Mesoporous Silica Nanoparticles for photodynamic therapy.

    PubMed

    Hocine, Ouahiba; Gary-Bobo, Magali; Brevet, David; Maynadier, Marie; Fontanel, Simon; Raehm, Laurence; Richeter, Sébastien; Loock, Bernard; Couleaud, Pierre; Frochot, Céline; Charnay, Clarence; Derrien, Gaëlle; Smaïhi, Monique; Sahmoune, Amar; Morère, Alain; Maillard, Philippe; Garcia, Marcel; Durand, Jean-Olivier

    2010-12-15

    The synthesis of silicalites and Mesoporous Silica Nanoparticles (MSN), which covalently incorporate original water-soluble photosensitizers for PDT applications is described. PDT was performed on MDA-MB-231 breast cancer cells. All the nanoparticles showed significant cell death after irradiation, which was not correlated with (1)O(2) quantum yield of the nanoparticles. Other parameters are involved and in particular the surface and shape of the nanoparticles which influence the pathway of endocytosis. Functionalization with mannose was necessary to obtain the best results with PDT due to an active endocytosis of mannose-functionalized nanoparticles. The quantity of mannose on the surface should be carefully adjusted as a too high amount of mannose impairs the phototoxicity of the nanoparticles. Fluorescein was also encapsulated in MCM-41 type MSN in order to localize the nanoparticles in the organelles of the cells by confocal microscopy. The MSN were localized in lysosomes after active endocytosis by mannose receptors. PMID:20934496

  5. Desalination of Basal Water by Mesoporous Carbons Nanocomposite Membrane.

    PubMed

    Choi, Jeongdong; Ahn, Youngho; Gamal El-Din, Mohamed; Kim, Eun-Sik

    2016-02-01

    The hydro-transportation process used to obtain bitumen from the Alberta oil sands produces large volume of basal depressurization water (BDW), which contains high salt concentrations. In this research, thin-film nanocomposite (TFN) membrane technology applied to treat BDW in lab-scale, and evaluated water properties before and after the treatment. The average rejection ratios of ionic species were 95.2% and 92.8% by TFN membrane (with ordered mesoporous carbons (OMCs)) and thin-film composite (TFC) (without OMCs) membrane, respectively. The turbidity and total dissolved solids (TDS) were completely rejected in all treatment conditions. Interestingly, the water flux of TFN membrane was dramatically increased compared to TFC membrane. The increase of water flux was believed to be caused by the increased membrane surface hydrophilicity and nano-pore effects by the OMCs. PMID:27433734

  6. Thrombin-Responsive Gated Silica Mesoporous Nanoparticles As Coagulation Regulators.

    PubMed

    Bhat, Ravishankar; Ribes, Àngela; Mas, Núria; Aznar, Elena; Sancenón, Félix; Marcos, M Dolores; Murguía, Jose R; Venkataraman, Abbaraju; Martínez-Máñez, Ramón

    2016-02-01

    The possibility of achieving sophisticated actions in complex biological environments using gated nanoparticles is an exciting prospect with much potential. We herein describe new gated mesoporous silica nanoparticles (MSN) loaded with an anticoagulant drug and capped with a peptide containing a thrombin-specific cleavage site. When the coagulation cascade was triggered, active thrombin degraded the capping peptidic sequence and induced the release of anticoagulant drugs to delay the clotting process. The thrombin-dependent response was assessed and a significant increase in coagulation time in plasma from 2.6 min to 5 min was found. This work broadens the application of gated silica nanoparticles and demonstrates their ability to act as controllers in a complex scenario such as hemostasis. PMID:26794474

  7. N-heptane adsorption and desorption in mesoporous materials

    NASA Astrophysics Data System (ADS)

    Zaleski, R.; Gorgol, M.; Błazewicz, A.; Kierys, A.; Goworek, J.

    2015-06-01

    Positron Annihilation Lifetime Spectroscopy (PALS) was used for an in situ monitoring of adsorption and desorption processes. The disordered and ordered porous silica as well as the porous polymer were used as adsorbents, while an adsorbate in all the cases was n-heptane. The lifetimes and particularly the intensities of the ortho-positronium(o-Ps) components depend strongly on the adsorbate pressure. The analysis of these dependencies allows us to identify several processes, which are taking place during sorption. At low pressure, an island-like growth of the first layers of the adsorbate on the silica, in a contrary to a swelling of the polymer, is observed. A size of the pores, which remain empty, is estimated at the subsequent stages of the adsorbate condensation and evaporation. The adsorbate thrusting into micropores is deduced at p/p0 > 0.6 whilst the mesopores are still not completely filled.

  8. Far-infrared spectra of mesoporous ZnS nanoparticles

    NASA Astrophysics Data System (ADS)

    Trajić, J.; Romčević, M.; Romčević, N.; Babić, B.; Matović, B.; Baláž, P.

    2016-07-01

    ZnS nanoparticles were synthesized mechanochemically by high-energy milling, with three different milling times (5 min, 10 min and 20 min). Nitrogen adsorption method was used for examining specific surface area and texture of obtained powders. It was found that all samples are completely mesoporous. The optical properties were studied by far-infrared spectroscopy at room temperature in spectral region of 50-600 cm-1. The analysis of the far-infrared reflectivity spectra was made by the fitting procedure. The dielectric function of ZnS nanoparticles is modeled as a mixture of homogenous spherical inclusions in air by the Maxwell-Garnet formula. In the analysis of the far-infrared reflection spectra, appearance of combined plasmon-LO phonon modes (CPPMs) with high phonon damping are observed, which causes decrease of coupled plasmon-phonon frequencies.

  9. Fabrication of mesoporous cerium dioxide films by cathodic electrodeposition.

    PubMed

    Kim, Young-Soo; Lee, Jin-Kyu; Ahn, Jae-Hoon; Park, Eun-Kyung; Kim, Gil-Pyo; Baeck, Sung-Hyeon

    2007-11-01

    Mesoporous cerium dioxide (Ceria, CeO2) thin films have been successfully electrodeposited onto ITO-coated glass substrates from an aqueous solution of cerium nitrate using CTAB (Cetyltrimethylammonium Bromide) as a templating agent. The synthesized films underwent detailed characterizations. The crystallinity of synthesized CeO2 film was confirmed by XRD analysis and HR-TEM analysis, and surface morphology was investigated by SEM analysis. The presence of mesoporosity in fabricated films was confirmed by TEM and small angle X-ray analysis. As-synthesized film was observed from XRD analysis and HR-TEM image to have well-crystallized structure of cubic phase CeO2. Transmission electron microscopy and small angle X-ray analysis revealed the presence of uniform mesoporosity with a well-ordered lamellar phase in the CeO2 films electrodeposited with CTAB templating. PMID:18047150

  10. Hydrothermal Synthesis of Meso-porous Materials using Diatomaceous Earth

    NASA Astrophysics Data System (ADS)

    Jing, Z.; Kato, S.; Maeda, H.; Ishida, E. H.

    2007-03-01

    In order to sustain the inherent properties of diatomaceous earth (DE), a low-temperature synthesis of mesoporous material from DE was carried out using a hydrothermal processing technique under saturated steam pressure at 200 °C for 12 h. The experimental results showed that the most important strength-producing constituent in the solidified specimens was tobermorite formed by hydrothermal processing, and the addition of slaked lime was favorable to tobermorite formation. At Ca/Si ratio around 0.83 in the starting material, tobermorite appeared to form readily. A high autoclave curing temperature (200 °C), or a longer curing time (12 h) seemed to accelerate the tobermorite formation, thus leading to a higher strength development.

  11. Mesoporous silica nanoparticles in tissue engineering--a perspective.

    PubMed

    Rosenholm, Jessica Maria; Zhang, Jixi; Linden, Mika; Sahlgren, Cecilia

    2016-02-01

    In this review, we summarize the latest developments and give a perspective on future applications of mesoporous silica nanoparticles (MSNs) in regenerative medicine. MSNs constitute a flexible platform for controlled delivery of drugs and imaging agents in tissue engineering and stem cell therapy. We highlight the recent advances in applying MSNs for controlled drug delivery and stem cell tracking. We touch upon novel functions of MSNs in real time imaging of drug release and biological function, and as tools to control the chemical and mechanical environment of stem cells. We discuss the need for novel model systems for studying biofunctionality and biocompatibility of MSNs, and how the interdisciplinary activities within the field will advance biotechnology research. PMID:26784861

  12. Porous thin films of functionalized mesoporous silica nanoparticles.

    PubMed

    Kobler, Johannes; Bein, Thomas

    2008-11-25

    The synthesis of extremely small mesoporous silica nanoparticles via a specific co-condensation process with phenyl groups is demonstrated. The suspensions are ideally suited for the production of nanoscale thin films by spin-coating. Thanks to the small particle size and the resulting low surface roughness, the films show excellent optical qualities and exhibit good diffusion properties and a highly accessible pore system. The availability of such homogeneous porous thin films made it possible to use ellipsometric porosimetry (EP) as a convenient method to determine the effective porosity of the films on their original support without destroying it. It was possible to record sorption isotherms of the thin films with ellipsometry and to correlate the data with nitrogen sorption data of dried powders of the same material. The thin films showed very low refractive indices of around 1.2. PMID:19206399

  13. Sol-gel synthesis and characterization of mesoporous manganese oxide

    SciTech Connect

    Hong Xinlin; Zhang Gaoyong; Zhu Yinyan; Yang Hengquan

    2003-10-30

    Mesoporous manganese oxide (MPMO) from reduction of KMnO{sub 4} with maleic acid, was obtained and characterized in detail. The characterization of the material was confirmed by high-resolution transmission electron microscopy (HRTEM), X-ray powder diffractometry (XRD) and N{sub 2} sorptometry. The results showed that MPMO is a pseudo-crystalline material with complex network pore structure, of which BET specific surface area is 297 m{sup 2}/g and pore size distribution is approximately in the range of 0.7-6.0 nm. The MPMO material turns to cryptomelane when the calcinating temperature rises to 400 deg. C. The optimum sol-gel reaction conditions are KMnO{sub 4}/C{sub 4}H{sub 4}O{sub 4} molar ratio=3, pH=7 and gelation time>6 h.

  14. Magnetic Mesoporous Palladium Catalyzed Selective Hydrogenation of Sunflower Oil.

    PubMed

    Liu, Wei; Tian, Fei; Yu, Jingjing; Bi, Yanlan

    2016-05-01

    In this paper, a novel magnetic mesoporous Pd catalyst is used to catalyse selective hydrogenation of sunflower oil at a mild temperature of 50°C. Effects of reaction temperature, stirring speed, time, catalyst loading and hydrogen pressure on the reaction activity, trans fatty acid (TFA) and stearic acid formation were studied. Under the condition of 3.2 mg Pd/100 g oil, 50°C, 1300 rpm stirring speed and 19.0 atm of H2, the lowest amount of TFA generated during the reaction (IV = 80) was 14.9 ± 0.4% while 11.4 ± 0.4% of stearic acid was produced. And this magnetic Pd-catalyst can be reused easily for at least six times without significant catalyst deactivation, the amount of TFA almost remained unchanged. Moreover, this Pd-catalyst shows a good magnetic separation, which provides a potential method for the facile oil modification. PMID:27086993

  15. Recyclable Magnetic Mesoporous Nanocomposite with Improved Sensing Performance toward Nitrite.

    PubMed

    Zhang, Yihe; Su, Zisheng; Li, Bin; Zhang, Liming; Fan, Di; Ma, Heping

    2016-05-18

    A magnetic nanomaterial for nitrite ion detection was demonstrated in the present study. This nanomaterial was prepared by grafting a rhodamine 6G derivative (denoted as Rh 6G-OH) into the channels of core-shell magnetic mesoporous silica nanospheres. The nanocomposite (denoted as Fe3O4@Rh 6G) showed large surface area and improved fluorescent performance to accumulate and recognize NO2(-), and its superparamagnetic behavior played an important role in reusability. The fluorescent intensity decreased linearly along with the NO2(-) concentration in the range of 1-50 μM, and the detection limit was estimated to be 0.8 μM, which was much lower than the maximum limit of nitrite ion in drinking water (65 μM) recommended by World Health Organization. Importantly, Fe3O4@Rh 6G could be magnetically collected and effectively reutilized after six test cycles. PMID:27115527

  16. Functionalized mesoporous silica nanoparticles for oral delivery of budesonide

    NASA Astrophysics Data System (ADS)

    Yoncheva, K.; Popova, M.; Szegedi, A.; Mihaly, J.; Tzankov, B.; Lambov, N.; Konstantinov, S.; Tzankova, V.; Pessina, F.; Valoti, M.

    2014-03-01

    Non-functionalized and amino-functionalized mesoporous silica nanoparticle were loaded with anti-inflammatory drug budesonide and additionally post-coated with bioadhesive polymer (carbopol). TEM images showed spherical shape of the nanoparticles and slightly higher polydispersity after coating with carbopol. Nitrogen physisorption and thermogravimetic analysis revealed that more efficient loading and incorporation into the pores of nanoparticles was achieved with the amino-functionalized silica carrier. Infrared spectra indicated that the post-coating of these nanoparticles with carbopol led to the formation of bond between amino groups of the functionalized carrier and carboxyl groups of carbopol. The combination of amino-functionalization of the carrier with the post-coating of the nanoparticles sustained budesonide release. Further, an in vitro model of inflammatory bowel disease showed that the cytoprotective effect of budesonide loaded in the post-coated silica nanoparticles on damaged HT-29 cells was more pronounced compared to the cytoprotection obtained with pure budesonide.

  17. A High Temperature Capacitive Humidity Sensor Based on Mesoporous Silica

    PubMed Central

    Wagner, Thorsten; Krotzky, Sören; Weiß, Alexander; Sauerwald, Tilman; Kohl, Claus-Dieter; Roggenbuck, Jan; Tiemann, Michael

    2011-01-01

    Capacitive sensors are the most commonly used devices for the detection of humidity because they are inexpensive and the detection mechanism is very specific for humidity. However, especially for industrial processes, there is a lack of dielectrics that are stable at high temperature (>200 °C) and under harsh conditions. We present a capacitive sensor based on mesoporous silica as the dielectric in a simple sensor design based on pressed silica pellets. Investigation of the structural stability of the porous silica under simulated operating conditions as well as the influence of the pellet production will be shown. Impedance measurements demonstrate the utility of the sensor at both low (90 °C) and high (up to 210 °C) operating temperatures. PMID:22163790

  18. Mesoporous silica nanoparticles deliver DNA and chemicals into plants

    NASA Astrophysics Data System (ADS)

    Torney, François; Trewyn, Brian G.; Lin, Victor S.-Y.; Wang, Kan

    2007-05-01

    Surface-functionalized silica nanoparticles can deliver DNA and drugs into animal cells and tissues. However, their use in plants is limited by the cell wall present in plant cells. Here we show a honeycomb mesoporous silica nanoparticle (MSN) system with 3-nm pores that can transport DNA and chemicals into isolated plant cells and intact leaves. We loaded the MSN with the gene and its chemical inducer and capped the ends with gold nanoparticles to keep the molecules from leaching out. Uncapping the gold nanoparticles released the chemicals and triggered gene expression in the plants under controlled-release conditions. Further developments such as pore enlargement and multifunctionalization of these MSNs may offer new possibilities in target-specific delivery of proteins, nucleotides and chemicals in plant biotechnology.

  19. White light emitting Mesoporous Carbon-Silica Nanocomposite

    NASA Astrophysics Data System (ADS)

    Matsumura, Akihiro; Ishii, Yosuke; Sato, Koji; Ishikawa, Yukari; Kawasaki, Shinji

    2011-05-01

    Visible photoluminescence (PL) from oxidized mesoporous carbon-silica nanocomposite (MPCS) prepared by the triconstituent co-assembly method is reported. White PL from MPCS was observed by naked eye at room temperature. Oxidation effects on carbon-silica bonding states and transmittance were investigated. PL intensity decreased with decreasing of carbon dangling bond density by oxidation at above 500 °C. The transmittance of MPCS at excitation and emission wavelengths increased with increasing of oxidation temperature. It is concluded that PL intensity is determined by the balance between PL related carbon density and transmittance. We proposed an additional wet oxidation that can increase PL intensity by the increase of transmittance under suppressing carbon desorption.

  20. Synthesis of mesoporous zirconia using an amphoteric surfactant

    SciTech Connect

    Kim, A.Y.; Bruinsma, P.J.; Chen, Y.L.; Liu, J.

    1996-12-31

    An amphoteric surfactant, cocamidopropyl betaine, was used for the synthesis of mesoporous zirconia. The carboxylate functionality of the surfactant permitted strong bonding with soluble zirconium species, while the quaternary ammonium group ensured large headgroup area and high solubility under acidic conditions. An amphoteric co-template [betaine, or (carboxymethyl)trimethylammonium hydroxide] improved uniformity of the hexagonal mesophase. Transmission electron microscopy (TEM) of the as-synthesized zirconium sulfate mesophase indicated hexagonal mesostructure, and low-angle X-ray diffraction (XRD) showed a 41 {angstrom} primary d-spacing and two higher order reflections of a hexagonal lattice. High surface area zirconia was produced by controlled base treatment of the hexagonal mesophase with sodium hydroxide, followed by calcination. TEM and XRD indicated that the mesostructure was stable to 350 C.

  1. An ordered mesoporous Ag superstructure synthesized via a template strategy for surface-enhanced Raman spectroscopy

    NASA Astrophysics Data System (ADS)

    Tian, Cuifeng; Li, Jiang; Ma, Chunsheng; Wang, Ping; Sun, Xiaohong; Fang, Jixiang

    2015-07-01

    Surface-enhanced Raman scattering (SERS) substrates with high density and uniformity of nanogaps are proven to enhance the reproducibility and sensitivity of the Raman signal. Up to now, the syntheses of a highly ordered gold or silver superstructure with a controllable nanoparticle size and a well-defined particle gap have been quite limited. Here, we reported an ordered mesoporous silver superstructure replicated by using ordered mesoporous KIT-6 and SAB-15 as templates. By means of a nanocasting process, the ordered mesoporous Ag superstructure was successfully synthesized, which shows uniform distribution of the nanowire diameter (10 nm) and nanogap size (~2 nm), thus exhibiting a high Raman enhancement of ~109. The finite difference time-domain (FDTD) results indicate that the ordered mesoporous Ag superstructure has a uniform distribution of hot spots. Therefore, the mesoporous silica template strategy presented here could lead to a new class of high quality SERS substrates providing extraordinary potential for diverse applications.Surface-enhanced Raman scattering (SERS) substrates with high density and uniformity of nanogaps are proven to enhance the reproducibility and sensitivity of the Raman signal. Up to now, the syntheses of a highly ordered gold or silver superstructure with a controllable nanoparticle size and a well-defined particle gap have been quite limited. Here, we reported an ordered mesoporous silver superstructure replicated by using ordered mesoporous KIT-6 and SAB-15 as templates. By means of a nanocasting process, the ordered mesoporous Ag superstructure was successfully synthesized, which shows uniform distribution of the nanowire diameter (10 nm) and nanogap size (~2 nm), thus exhibiting a high Raman enhancement of ~109. The finite difference time-domain (FDTD) results indicate that the ordered mesoporous Ag superstructure has a uniform distribution of hot spots. Therefore, the mesoporous silica template strategy presented here could

  2. Chemistry of alkali cation exchanged faujasite and mesoporous NaX using alkyl halides and phosphates

    NASA Astrophysics Data System (ADS)

    Lee, Min-Hong

    The purpose of this work was to increase the reactivity of Faujasite X (NaX) zeolite toward the reactive decontamination of materials subject to nucleophilic attack by means of zeolite cation optimization and by means of the synthesis of mesoporous Faujasite X. Primary alkyl halides and trialkyl phosphates have been the test materials on which the cation-optimized and mesoporous zeolites have been tested. In the alkali cation optimization work, reactions of methyl iodide and 1-chloropropane with alkali metal cation exchanged Faujasite zeolite X were investigated at room temperature. The reactivity of the framework and the product formation were shown to depend on zeolite framework counter-cation. A quantitative study of zeolite product formation has been carried out, primarily using solid-state NMR spectroscopy. Large alkali cations showed preference toward substitution chemistry. In contrast, alkyl halide exposed LiX and NaX zeolites underwent both substitution and elimination. Subsequently introduced water molecules led to hydrolysis of framework species that was sensitive to framework counter-cation. The mesoporous NaX zeolites work undertakes to test whether an improvement in surface chemical reactivity can be achieved by introducing mesopores into the already reactive nucleophilic microporous NaX zeolite. Incorporation of the polydiallyl dimethyl ammonium chloride (PDADMAC) template and the formation of mesopores in Faujasite X zeolite (NaX) were successful and well-characterized. The mesopores are proposed to have occurred from incorporation of the cationic PDADMAC polymer into the zeolite by compensating zeolite framework charge. Subsequent sodium cation exchange of calcined mesoporous NaX was shown to restore the chemical reactivity characteristic of as-synthesized NaX. Trialkyl organophosphorous compounds underwent substitution reactions. The reactivity of both microporous and mesoporous Faujasite zeolite X and the product formation was shown to depend on

  3. Mesoporous silica-layered biopolymer hybrid nanofibrous scaffold: a novel nanobiomatrix platform for therapeutics delivery and bone regeneration.

    PubMed

    Singh, Rajendra K; Jin, Guang-Zhen; Mahapatra, Chinmaya; Patel, Kapil D; Chrzanowski, Wojciech; Kim, Hae-Won

    2015-04-22

    Nanoscale scaffolds that characterize high bioactivity and the ability to deliver biomolecules provide a 3D microenvironment that controls and stimulates desired cellular responses and subsequent tissue reaction. Herein novel nanofibrous hybrid scaffolds of polycaprolactone shelled with mesoporous silica (PCL@MS) were developed. In this hybrid system, the silica shell provides an active biointerface, while the 3D nanoscale fibrous structure provides cell-stimulating matrix cues suitable for bone regeneration. The electrospun PCL nanofibers were coated with MS at controlled thicknesses via a sol-gel approach. The MS shell improved surface wettability and ionic reactions, involving substantial formation of bone-like mineral apatite in body-simulated medium. The MS-layered hybrid nanofibers showed a significant improvement in mechanical properties, in terms of both tensile strength and elastic modulus, as well as in nanomechanical surface behavior, which is favorable for hard tissue repair. Attachment, growth, and proliferation of rat mesenchymal stem cells were significantly improved on the hybrid scaffolds, and their osteogenic differentiation and subsequent mineralization were highly up-regulated by the hybrid scaffolds. Furthermore, the mesoporous surface of the hybrid scaffolds enabled the loading of a series of bioactive molecules, including small drugs and proteins at high levels. The release of these molecules was sustainable over a long-term period, indicating the capability of the hybrid scaffolds to deliver therapeutic molecules. Taken together, the multifunctional hybrid nanofibrous scaffolds are considered to be promising therapeutic platforms for stimulating stem cells and for the repair and regeneration of bone. PMID:25768431

  4. Functionalized mesoporous materials for adsorption and release of different drug molecules: A comparative study

    SciTech Connect

    Wang Gang; Otuonye, Amy N.; Blair, Elizabeth A.; Denton, Kelley; Tao Zhimin; Asefa, Tewodros

    2009-07-15

    The adsorption capacity and release properties of mesoporous materials for drug molecules can be improved by functionalizing their surfaces with judiciously chosen organic groups. Functionalized ordered mesoporous materials containing various types of organic groups via a co-condensation synthetic method from 15% organosilane and by post-grafting organosilanes onto a pre-made mesoporous silica were synthesized. Comparative studies of their adsorption and release properties for various model drug molecules were then conducted. Functional groups including 3-aminopropyl, 3-mercaptopropyl, vinyl, and secondary amine groups were used to functionalize the mesoporous materials while rhodamine 6G and ibuprofen were utilized to investigate the materials' relative adsorption and release properties. The self-assembly of the mesoporous materials was carried out in the presence of cetyltrimethylammonium bromide (CTAB) surfactant, which produced MCM-41 type materials with pore diameters of {approx}2.7-3.3 nm and moderate to high surface areas up to {approx}1000 m{sup 2}/g. The different functional groups introduced into the materials dictated their adsorption capacity and release properties. While mercaptopropyl and vinyl functionalized samples showed high adsorption capacity for rhodamine 6G, amine functionalized samples exhibited higher adsorption capacity for ibuprofen. While the diffusional release of ibuprofen was fitted on the Fickian diffusion model, the release of rhodamine 6G followed Super Case-II transport model. - Graphical abstract: The adsorption capacity and release properties of mesoporous materials for various drug molecules are tuned by functionalizing the surfaces of the materials with judiciously chosen organic groups. This work reports comparative studies of the adsorption and release properties of functionalized ordered mesoporous materials containing different hydrophobic and hydrophilic groups that are synthesized via a co-condensation and post

  5. Ultrasonic-assisted ultra-rapid synthesis of monodisperse meso-SiO2@Fe3O4 microspheres with enhanced mesoporous structure.

    PubMed

    Liu, Hongfei; Ji, Shengfu; Yang, Hao; Zhang, Huan; Tang, Mi

    2014-03-01

    A core-shell-type of meso-SiO2@Fe3O4 microsphere was synthesized via an ultrasonic-assisted surfactant-templating process using solvothermal synthesized Fe3O4 as core, tetraethoxysilane (TEOS) as silica source, and cetyltrimethyl ammonium bromide (CTAB) as templates. The samples were characterized by FT-IR, XRD, TEM, N2 adsorption-desorption technology, and vibrating sample magnetometer (VSM). The results show that as-prepared meso-SiO2@Fe3O4(E) and meso-SiO2@Fe3O4(C) microspheres, treated by acetone extraction and high temperature calcination, respectively, still maintain uniform core-shell structure with desirable mesoporous silica shell. Therein, the meso-SiO2@Fe3O4(E) microspheres possess a distinct pore size distribution in 1.8-3.0 nm with large specific surface area (468.6 m(2)/g) and pore volume (0.35 cm(3)/g). Noteworthily, the coating period of this ultrasonic-assisted method (40 min) is much shorter than that of the conventional method (12-24 h). The morphology of microspheres and the mesoporous structure of silica shell are significantly influenced by initial concentration of CTAB (CCTAB), ultrasonic irradiation power (P) and ultrasonic irradiation time (t). The acceleration roles of ultrasonic irradiation take effect during the whole coating process of mesoporous silica shell, including hydrolysis-condensation process of TEOS, co-assembly of hydrolyzed precursors and CTAB, and deposition of silica oligomers. In addition, the use of ultrasonic irradiation is favorable for improving the homogeneity of silica shell and the monodispersity of meso-SiO2@Fe3O4 microspheres. PMID:24021613

  6. Evolution of periodicity in periodical cicadas

    PubMed Central

    Ito, Hiromu; Kakishima, Satoshi; Uehara, Takashi; Morita, Satoru; Koyama, Takuya; Sota, Teiji; Cooley, John R.; Yoshimura, Jin

    2015-01-01

    Periodical cicadas (Magicicada spp.) in the USA are famous for their unique prime-numbered life cycles of 13 and 17 years and their nearly perfectly synchronized mass emergences. Because almost all known species of cicada are non-periodical, periodicity is assumed to be a derived state. A leading hypothesis for the evolution of periodicity in Magicicada implicates the decline in average temperature during glacial periods. During the evolution of periodicity, the determinant of maturation in ancestral cicadas is hypothesized to have switched from size dependence to time (period) dependence. The selection for the prime-numbered cycles should have taken place only after the fixation of periodicity. Here, we build an individual-based model of cicadas under conditions of climatic cooling to explore the fixation of periodicity. In our model, under cold environments, extremely long juvenile stages lead to extremely low adult densities, limiting mating opportunities and favouring the evolution of synchronized emergence. Our results indicate that these changes, which were triggered by glacial cooling, could have led to the fixation of periodicity in the non-periodical ancestors. PMID:26365061

  7. Novel hollow mesoporous 1D TiO2 nanofibers as photovoltaic and photocatalytic materials.

    PubMed

    Zhang, Xiang; Thavasi, Velmurugan; Mhaisalkar, S G; Ramakrishna, Seeram

    2012-03-01

    Hollow mesoporous one dimensional (1D) TiO(2) nanofibers are successfully prepared by co-axial electrospinning of a titanium tetraisopropoxide (TTIP) solution with two immiscible polymers; polyethylene oxide (PEO) and polyvinylpyrrolidone (PVP) using a core-shell spinneret, followed by annealing at 450 °C. The annealed mesoporous TiO(2) nanofibers are found to having a hollow structure with an average diameter of 130 nm. Measurements using the Brunauer-Emmett-Teller (BET) method reveal that hollow mesoporous TiO(2) nanofibers possess a high surface area of 118 m(2) g(-1) with two types of mesopores; 3.2 nm and 5.4 nm that resulted from gaseous removal of PEO and PVP respectively during annealing. With hollow mesoporous TiO(2) nanofibers as the photoelectrode in dye sensitized solar cells (DSSC), the solar-to-current conversion efficiency (η) and short circuit current (J(sc)) are measured as 5.6% and 10.38 mA cm(-2) respectively, which are higher than those of DSSC made using regular TiO(2) nanofibers under identical conditions (η = 4.2%, J(sc) = 8.99 mA cm(-2)). The improvement in the conversion efficiency is mainly attributed to the higher surface area and mesoporous TiO(2) nanostructure. It facilitates the adsorption of more dye molecules and also promotes the incident photon to electron conversion. Hollow mesoporous TiO(2) nanofibers with close packing of grains and crystals intergrown with each other demonstrate faster electron diffusion, and longer electron recombination time than regular TiO(2) nanofibers as well as P25 nanoparticles. The surface effect of hollow mesoporous TiO(2) nanofibers as a photocatalyst for the degradation of rhodamine dye was also investigated. The kinetic study shows that the hollow mesoporous surface of the TiO(2) nanofibers influenced its interactions with the dye, and resulted in an increased catalytic activity over P25 TiO(2) nanocatalysts. PMID:22315140

  8. Synthesis of morphology-controllable mesoporous Co{sub 3}O{sub 4} and CeO{sub 2}

    SciTech Connect

    Wang Yangang; Wang Yanqin; Ren Jiawen; Mi Yan; Zhang Fengyuan; Li Changlin; Liu Xiaohui; Guo Yun; Guo Yanglong; Lu Guanzhong

    2010-02-15

    Recently, extensive works have been devoted to the morphology control of mesoporous materials with respect to their use in various applications. In this paper, we used two kinds of mesoporous silica, SBA-15 rods and spheres as hard templates to synthesize morphology-controllable mesoporous metal oxides. By carefully controlling the loading of metal precursors in the mesopores of the hard template, mesoporous Co{sub 3}O{sub 4} and CeO{sub 2} with different morphologies, such as micrometer-sized rod, hollow sphere, saucer-like sphere, and solid sphere were conveniently obtained. The structural properties of these materials were characterized by XRD, BET, SEM and TEM. In addition, it is found that the differences observed in the textural properties of the two mesoporous metal oxides nanocasted from the same template can be attributed to the properties of metal precursors and the interaction between metal oxide and SiO{sub 2}. Thus-obtained mesoporous metal oxides with such special morphologies may have a potential application in the field of environmental catalytic oxidation. - Graphical Abstract: Mesoporous Co{sub 3}O{sub 4} and CeO{sub 2} with different morphologies, such as micrometer-sized rod, hollow sphere, saucer-like sphere, and solid sphere were synthesized by nanocasting.

  9. Ion current behaviors of mesoporous zeolite-polymer composite nanochannels prepared by water-assisted self-assembly.

    PubMed

    Zhang, Wenjuan; Meng, Zheyi; Zhai, Jin; Heng, Liping

    2014-04-01

    Inspired by the asymmetry of biological ion channels in structure and composition, we designed a novel type of artificial asymmetric nanochannels based on mesoporous zeolite (MCM-41) and polyimide (PI) by water-assisted self-assembly. Meanwhile, we studied ionic current behaviors and rectifying characteristics of the mesoporous zeolite-polymer composite nanochannels. PMID:24394328

  10. Ordered mesoporous carbons obtained by a simple soft template method as sulfur immobilizers for lithium-sulfur cells.

    PubMed

    Moreno, Noelia; Caballero, Alvaro; Hernán, Lourdes; Morales, Julián; Canales-Vázquez, Jesús

    2014-08-28

    Carbon materials with ordered mesoporous structures were synthesized using soft template methods and then activated by CO2 treatment. Sulfur was incorporated in these carbons via a simple chemical deposition method in aqueous solutions and the resulting composites were tested as electrodes in Li-S cells. The electrochemical results showed that well-ordered mesoporous carbons perform better than those with a random mesopore arrangement (wormhole-like mesoporous structure). The mesopore ordering yields a framework of well-connected empty sites that results in an enhancement of both the charge carrier mobility and the reversibility of the electrochemical reaction. Although the activation with CO2 partially destroys the mesopore arrangement, which adversely affects the electrode performance, it notably increases the surface area and the micropore content which improves the connectivity between the mesopores. The final observation was an irrelevant effect of the activation process at low current densities. However, at higher rates the activated carbon composite delivered higher capacities. The hierarchical pore structure formed by micro- and mesopores should guarantee the required fast mobility of the Li(+). PMID:25019261

  11. Electrochemical synthesis of mesoporous Pt-Au binary alloys with tunable compositions for enhancement of electrochemical performance.

    PubMed

    Yamauchi, Yusuke; Tonegawa, Akihisa; Komatsu, Masaki; Wang, Hongjing; Wang, Liang; Nemoto, Yoshihiro; Suzuki, Norihiro; Kuroda, Kazuyuki

    2012-03-21

    Mesoporous Pt-Au binary alloys were electrochemically synthesized from lyotropic liquid crystals (LLCs) containing corresponding metal species. Two-dimensional exagonally ordered LLC templates were prepared on conductive substrates from diluted surfactant solutions including water, a nonionic surfactant, ethanol, and metal species by drop-coating. Electrochemical synthesis using such LLC templates enabled the preparation of ordered mesoporous Pt-Au binary alloys without phase segregation. The framework composition in the mesoporous Pt-Au alloy was controlled simply by changing the compositional ratios in the precursor solution. Mesoporous Pt-Au alloys with low Au content exhibited well-ordered 2D hexagonal mesostructures, reflecting those of the original templates. With increasing Au content, however, the mesostructural order gradually decreased, thereby reducing the electrochemically active surface area. Wide-angle X-ray diffraction profiles, X-ray photoelectron spectra, and elemental mapping showed that both Pt and Au were atomically distributed in the frameworks. The electrochemical stability of mesoporous Pt-Au alloys toward methanol oxidation was highly improved relative to that of nonporous Pt and mesoporous Pt films, suggesting that mesoporous Pt-Au alloy films are potentially applicable as electrocatalysts for direct methanol fuel cells. Also, mesoporous Pt-Au alloy electrodes showed a highly sensitive amperometric response for glucose molecules, which will be useful in next-generation enzyme-free glucose sensors. PMID:22352760

  12. Surface functionalized mesoporous silica nanoparticles for intracellular drug delivery

    NASA Astrophysics Data System (ADS)

    Vivero-Escoto, Juan Luis

    Mesoporous silica nanoparticles (MSNs) are a highly promising platform for intracellular controlled release of drugs and biomolecules. Despite that the application of MSNs in the field of intracellular drug delivery is still at its infancy very exciting breakthroughs have been achieved in the last years. A general review of the most recent progress in this area of research is presented, including a description of the latest findings on the pathways of entry into live mammalian cells together with the intracellular trafficking, a summary on the contribution of MSNs to the development of site-specific drug delivery systems, a report on the biocompatibility of this material in vitro andin vivo, and a discussion on the most recent breakthroughs in the synthesis and application of stimuli-responsive mesoporous silica-based delivery vehicles. A gold nanoparticles (AuNPs)-capped MSNs-based intracellular photoinduced drug delivery system (PR-AuNPs-MSNs) for the controlled release of anticancer drug inside of human fibroblast and liver cells was synthesized and characterized. We found that the mesoporous channels of MSNs could be efficiently capped by the photoresponsive AuNPs without leaking the toxic drug, paclitaxel, inside of human cells. Furthermore, we demonstrated that the cargo-release property of this PR-AuNPs-MSNs system could be easily photo-controlled under mild and biocompatible conditions in vitro. In collaboration with Renato Mortera (a visiting student from Italy), a MSNs based intracellular delivery system for controlled release of cell membrane impermeable cysteine was developed. A large amount of cysteine molecules were covalently attached to the silica surface of MSNs through cleavable disulfide linkers. These cysteine-containing nanoparticles were efficiently endocytosed by human cervical cancer cells HeLa. These materials exhibit 450 times higher cell growth inhibition capability than that of the conventional N-acetylcysteine prodrug. The ability to

  13. Mesoporous Carbon-based Materials for Alternative Energy Applications

    NASA Astrophysics Data System (ADS)

    Cross, Kimberly Michelle

    Increasing concerns for the escalating issues activated by the effect of carbon dioxide emissions on the global climate from extensive use of fossil fuels and the limited amount of fossil resources has led to an in-depth search for alternative energy systems, primarily based on nuclear or renewable energy sources. Recent innovations in the production of more efficient devices for energy harvesting, storage, and conversion are based on the incorporation of nanostructured materials into electrochemical systems. The aforementioned nano-electrochemical energy systems hold particular promise for alternative energy transportation related technologies including fuel cells, hydrogen storage, and electrochemical supercapacitors. In each of these devices, nanostructured materials can be used to increase the surface area where the critical chemical reactions occur within the same volume and mass, thereby increasing the energy density, power density, electrical efficiency, and physical robustness of the system. Durable corrosion resistant carbon support materials for fuel cells have been designed by adding conductive low cost carbon materials with chemically robust ceramic materials. Since a strict control of the pore size is mandatory to optimize properties for improved performance, chemical activation agents have been utilized as porogens to tune surface areas, pore size distributions, and composition of carbon-based mesoporous materials. Through the use of evaporative self-assembly methods, both randomly disordered and surfactant-templated, ordered carbon-silica nanocomposites have been synthesized with controlled surface area, pore volume, and pore size ranging from 50-800 m2/g, 0.025-0.75 cm3/g, and 2-10 nm, respectively. Multi-walled carbon nanotubes (MWNTs) ranging from 0.05-1.0 wt. % were added to the aforementioned carbon-silica nanocomposites, which provided an additional increase in surface area and improved conductivity. Initially, a conductivity value of 0.0667 S

  14. Preparation, Characterization and Photocatalytic Activity of Lanthanum Doped Mesoporous Titanium Dioxide

    NASA Astrophysics Data System (ADS)

    Shi, Zhong-liang; Lai, Hong; Yao, Shu-hua; Wang, Shao-feng

    2012-02-01

    Lanthanum doped mesoporous titanium dioxide photocatalysts with different La content were synthesized by template method using tetrabutyltitanate (Ti(OC4H9)4) as precursor and Pluronic P123 as template. The catalysts were characterized by thermogravimetric differential thermal analysis, N2 adsorption-desorption measurements, X-ray diffraction, and UV-Vis adsorption spectroscopy. The effect of La3+ doping concentration from 0.1% to 1% on the photocatalytic activity of mesoporous TiO2 was investigated. The characterizations indicated that the photocatalysts possessed a homogeneous pore diameter of about 10 nm with high surface area of 165 m2/g. X-ray photoelectron spectroscopy measurements indicated the presence of C in the doped samples in addition to La. Compared with pure mesoporous TiO2, the La-doped samples extended the photoabsorption edge into the visible light region. The results of phenol photodecomposition showed that La-doped mesoporous TiO2 exhibited higher photocatalytic activities than pure mesoporous TiO2 under UV and visible light irradiation.

  15. Controlled Synthesis of Pt Nanowires with Ordered Large Mesopores for Methanol Oxidation Reaction.

    PubMed

    Zhang, Chengwei; Xu, Lianbin; Yan, Yushan; Chen, Jianfeng

    2016-01-01

    Catalysts for methanol oxidation reaction (MOR) are at the heart of key green-energy fuel cell technology. Nanostructured Pt materials are the most popular and effective catalysts for MOR. Controlling the morphology and structure of Pt nanomaterials can provide opportunities to greatly increase their activity and stability. Ordered nanoporous Pt nanowires with controlled large mesopores (15, 30 and 45 nm) are facilely fabricated by chemical reduction deposition from dual templates using porous anodic aluminum oxide (AAO) membranes with silica nanospheres self-assembled in the channels. The prepared mesoporous Pt nanowires are highly active and stable electrocatalysts for MOR. The mesoporous Pt nanowires with 15 nm mesopores exhibit a large electrochemically active surface area (ECSA, 40.5 m(2) g(-1)), a high mass activity (398 mA mg(-1)) and specific activity (0.98 mA cm(-2)), and a good If/Ib ratio (1.15), better than the other mesoporous Pt nanowires and the commercial Pt black catalyst. PMID:27550737

  16. Controlled Synthesis of Pt Nanowires with Ordered Large Mesopores for Methanol Oxidation Reaction

    PubMed Central

    Zhang, Chengwei; Xu, Lianbin; Yan, Yushan; Chen, Jianfeng

    2016-01-01

    Catalysts for methanol oxidation reaction (MOR) are at the heart of key green-energy fuel cell technology. Nanostructured Pt materials are the most popular and effective catalysts for MOR. Controlling the morphology and structure of Pt nanomaterials can provide opportunities to greatly increase their activity and stability. Ordered nanoporous Pt nanowires with controlled large mesopores (15, 30 and 45 nm) are facilely fabricated by chemical reduction deposition from dual templates using porous anodic aluminum oxide (AAO) membranes with silica nanospheres self-assembled in the channels. The prepared mesoporous Pt nanowires are highly active and stable electrocatalysts for MOR. The mesoporous Pt nanowires with 15 nm mesopores exhibit a large electrochemically active surface area (ECSA, 40.5 m2 g−1), a high mass activity (398 mA mg−1) and specific activity (0.98 mA cm−2), and a good If/Ib ratio (1.15), better than the other mesoporous Pt nanowires and the commercial Pt black catalyst. PMID:27550737

  17. Photon-Manipulated Drug Release from Mesoporous Nanocontainer Controlled by Azobenzene-Modified Nucleic Acid

    PubMed Central

    Yuan, Quan; Zhang, Yunfei; Chen, Tao; Lu, Danqing; Zhao, Zilong; Zhang, Xiaobing; Li, Zhenxing; Yan, Chun-Hua; Tan, Weihong

    2012-01-01

    Herein a photon manipulated mesoporous release system was constructed based on azobenzene-modified nucleic acids. In this system, the azobenzene-incorporated DNA double strands were immobilized at the pore mouth of meso-porous silica nanoparticles. The photo-isomerization of azobenzene induced dehybridization/hybridization switch of complementary DNA, causing uncapping/capping of pore gates of mesoporous silica. This nanoplatform permits holding of guest molecules within the nanopores under visible light but release them when light wavelength turns to UV range. These DNA/mesoporous silica hybrid nanostructures were exploited as carriers for cancer cell chemotherapy drug doxorubicin (DOX) due to its stimuli-responsive property as well as good biocompatibility via MTT assay. It is found that the drug release behavior is light wavelength sensitive. Switching of the light from visible to UV range uncapped the pores causes the release of DOX from the mesoporous silica nanospheres and an obvious cytotoxic effect on cancer cells. We envision that this photo-controlled drug release system could find potential applications in cancer therapy. PMID:22670595

  18. Hierarchically ordered mesoporous Co3O4 materials for high performance Li-ion batteries

    PubMed Central

    Sun, Shijiao; Zhao, Xiangyu; Yang, Meng; Wu, Linlin; Wen, Zhaoyin; Shen, Xiaodong

    2016-01-01

    Highly ordered mesoporous Co3O4 materials have been prepared via a nanocasting route with three-dimensional KIT-6 and two-dimensional SBA-15 ordered mesoporous silicas as templates and Co(NO3)2 · 6H2O as precursor. Through changing the hydrothermal treating temperature of the silica template, ordered mesoporous Co3O4 materials with hierarchical structures have been developed. The larger pores around 10 nm provide an efficient transport for Li ions, while the smaller pores between 3–5 nm offer large electrochemically active areas. Electrochemical impedance analysis proves that the hierarchical structure contributes to a lower charge transfer resistance in the mesoporous Co3O4 electrode than the mono-sized structure. High reversible capacities around 1141 mAh g−1 of the hierarchically mesoporous Co3O4 materials are obtained, implying their potential applications for high performance Li-ion batteries. PMID:26781265

  19. Chemical Insight into the Adsorption of Chromium(III) on Iron Oxide/Mesoporous Silica Nanocomposites.

    PubMed

    Egodawatte, Shani; Datt, Ashish; Burns, Eric A; Larsen, Sarah C

    2015-07-14

    Magnetic iron oxide/mesoporous silica nanocomposites consisting of iron oxide nanoparticles embedded within mesoporous silica (MCM-41) and modified with aminopropyl functional groups were prepared for application to Cr(III) adsorption followed by magnetic recovery of the nanocomposite materials from aqueous solution. The composite materials were extensively characterized using physicochemical techniques, such as powder X-ray diffraction, thermogravimetric and elemental analysis, nitrogen adsorption, and zeta potential measurements. For aqueous Cr(III) at pH 5.4, the iron oxide/mesoporous silica nanocomposite exhibited a superior equilibrium adsorption capacity of 0.71 mmol/g, relative to 0.17 mmol/g for unmodified mesoporous silica. The aminopropyl-functionalized iron oxide/mesoporous silica nanocomposites displayed an equilibrium adsorption capacity of 2.08 mmol/g, the highest adsorption capacity for Cr(III) of all the materials evaluated in this study. Energy-dispersive spectroscopy (EDS) with transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) experiments provided insight into the chemical nature of the adsorbed chromium species. PMID:26134074

  20. Mesoporous CLEAs-silica composite microparticles with high activity and enhanced stability

    PubMed Central

    Cui, Jiandong; Jia, Shiru; Liang, Longhao; Zhao, Yamin; Feng, Yuxiao

    2015-01-01

    A novel enzyme immobilization approach was used to generate mesoporous enzymes-silica composite microparticles by co-entrapping gelatinized starch and cross-linked phenylalanine ammonia lyase (PAL) aggregates (CLEAs) containing gelatinized starch into biomemitic silica and subsequently removing the starch by α-amylase treatment. During the preparation process, the gelatinzed starch served as a pore-forming agent to create pores in CLEAs and biomimetic silica. The resulting mesoporous CLEAs-silica composite microparticles exhibited higher activity and stability than native PAL, conventional CLEAs, and PAL encapsulated in biomimetic silica. Furthermore, the mesoporous CLEAs-silica composite microparticles displayed good reusability due to its suitable size and mechanical properties, and had excellent stability for storage. The superior catalytic performances were attributed to the combinational unique structure from the intra-cross-linking among enzyme aggregates and hard mesoporous silica shell, which not only decreased the enzyme-support negative interaction and mass-transfer limitations, but also improved the mechanical properties and monodispersity. This approach will be highly beneficial for preparing various bioactive mesoporous composites with excellent catalytic performance. PMID:26374188

  1. Magnetic Fluorescent Delivery Vehicle using Uniform Mesoporous Silica Spheres Embedded with Monodisperse Magnetic and Semiconductor Nanocrystals

    SciTech Connect

    Kim, Jaeyun; Lee, Ji Eun; Lee, Jinwoo; Yu, Jung Ho; Kim, Byoung Chan; An, Kwangjin; Hwang, Yosun; Shin, Chae-Ho; Park, Je-Geun; Kim, Jungbae; Hyeon, Taeghwan

    2006-01-25

    Uniform sized colloidal nanocrystals have attracted much attention, because of their unique magnetic and optical properties, as compared with those of their bulk counterparts. Especially magnetic nanocrystals and quantum dots have been intensively pursued for biomedical applications such as contrast enhancement agents in magnetic resonance imaging, magnetic carriers for drug delivery system, biological labeling and diagnostics. Due to their large pore sizes and high surface areas, mesoporous materials and its composites with nanocrystals have attracted considerable attention. In order to use the nanocrystals as functional delivery carriers and catalytic supports, nanocrystals coated with porous silica shells are desirable. Herein, we report a synthetic procedure for the fabrication of monodisperse nanocrystals embedded in uniform pore-sized mesoporous silica spheres. As a representative example, we synthesized monodisperse magnetite (Fe3O4) nanocrystals embedded in mesoporous silica spheres and both magnetite nanocrystals and CdSe/ZnS quantum dots embedded in mesoporous silica spheres. Furthermore, these mesoporous silica spheres were applied to the uptake and controlled release of drugs.

  2. Sustainable mesoporous carbons as storage and controlled-delivery media for functional molecules.

    PubMed

    Saha, Dipendu; Payzant, E Andrew; Kumbhar, Amar S; Naskar, Amit K

    2013-06-26

    Here, we report the synthesis of surfactant-templated mesoporous carbons from lignin, which is a biomass-derived polymeric precursor, and their potential use as a controlled-release medium for functional molecules such as pharmaceuticals. To the best of our knowledge, this is the first report on the use of lignin for chemical-activation-free synthesis of functional mesoporous carbon. The synthesized carbons possess the pore widths within the range of 2.5-12.0 nm. In this series of mesoporous carbons, our best result demonstrates a Brunauer-Emmett-Teller (BET) surface area of 418 m(2)/g and a mesopore volume of 0.34 cm(3)/g, which is twice the micropore volume in this carbon. Because of the dominant mesoporosity, this engineered carbon demonstrates adsorption and controlled release of a representative pharmaceutical drug, captopril, in simulated gastric fluid. Large-scale utilization of these sustainable mesoporous carbons in applications involving adsorption, transport, and controlled release of functional molecules is desired for industrial processes that yield lignin as a coproduct. PMID:23731336

  3. Mesoporous hybrid NiOx-MnOx nanoprisms for flexible solid-state asymmetric supercapacitors.

    PubMed

    Wei, Chengzhen; Cheng, Cheng; Ma, Lan; Liu, Mengna; Kong, Dechen; Du, Weimin; Pang, Huan

    2016-06-28

    Mesoporous hybrid NiOx-MnOx nanoprisms have been successfully prepared in this work. The synthesis process involves a facile solvothermal method for preparation of Ni-Mn precursor particles and a subsequent annealing treatment. These mesoporous hybrid NiOx-MnOx nanoprisms have a high surface area of 101.6 m(2) g(-1). When evaluated as electrode materials in supercapacitors, the as-prepared mesoporous hybrid NiOx-MnOx nanoprisms deliver a specific capacitance of 1218 F g(-1) at a current density of 2.0 A g(-1). More importantly, the mesoporous hybrid NiOx-MnOx nanoprisms were successfully used to construct flexible solid-state asymmetric supercapacitors. The device shows a specific capacitance of 149.1 mF cm(-2) at 2.0 mA cm(-2), a good cycling stability with only 2.9% loss of capacitance after 5000 charge-discharge cycles, and good mechanical flexibility under different bending angles. These results support the promising application of mesoporous hybrid NiOx-MnOx nanoprisms as advanced supercapacitor materials. PMID:27295406

  4. Synthesis of manganese oxide supported on mesoporous titanium oxide: Influence of the block copolymer

    SciTech Connect

    Schmit, F.; Bois, L.; Chiriac, R.; Toche, F.; Chassagneux, F.; Besson, M.; Descorme, C.; Khrouz, L.

    2015-01-15

    Manganese oxides supported on mesoporous titanium oxides were synthesized via a sol–gel route using block copolymer self-assembly. The oxides were characterized by X-ray diffraction, infrared spectroscopy, thermal analyses, nitrogen adsorption/desorption, electron microscopy and electronic paramagnetic resonance. A mesoporous anatase containing amorphous manganese oxide particles could be obtained with a 0.2 Mn:Ti molar ratio. At higher manganese loading (0.5 Mn:Ti molar ratio), segregation of crystalline manganese oxide occurred. The influence of block copolymer and manganese salt on the oxide structure was discussed. The evolution of the textural and structural characteristics of the materials upon hydrothermal treatment was also investigated. - Graphical abstract: One-pot amorphous MnO{sub 2} supported on mesoporous anataseTiO{sub 2}. - Highlights: • Mesoporous manganese titanium oxides were synthesized using block copolymer. • Block copolymers form complexes with Mn{sup 2+} from MnCl{sub 2}. • With block copolymer, manganese oxide can be dispersed around the titania crystallites. • With Mn(acac){sub 2}, manganese is dispersed inside titania. • MnOOH crystallizes outside mesoporous titania during hydrothermal treatment.

  5. A hydrothermal synthesis of Pr3+ doped mesoporous TiO2 for UV light photocatalysis.

    PubMed

    Wang, Yong; Chen, Guihua; Shen, Qianhong; Yang, Hui; Li, Liquan; Song, Yanjiang

    2014-07-01

    Pr3+ doped mesoporous TiO2 photocatalysts with a different molar ratio of Pr to Ti were prepared by a hydrothermal method using triblock copolymer as the template. The as-prepared samples were systematically characterized by X-ray diffraction, N2 adsorption-desorption, X-ray photoelectron spectra, transmission electron microscopy and UV-visible diffuse reflectance spectroscopy. The characterizations indicated all the samples had mesoporous structure and narrow pore size distribution. Pr3+ doping enlarged the surface area and decreased the crystallite size. The surface area of the samples varied from 136 to 170 m2/g, and the average crystallite size ranged between 5.04 and 7.60 nm. The effect of Pr3+ doping amount on the photocatalytic activity of mesoporous TiO2 was evaluated by the degradation of methyl orange under UV light irradiation. The results showed that the suitable amount of Pr3+ doped samples exhibited the higher photocatalytic activity than mesoporous TiO2. Among the samples, 1 at.% Pr3+ doped mesoporous TiO2 showed the highest photocatalytic activity. PMID:24757971

  6. Graphitic Mesoporous Carbon Loaded with Iron-Nickel Hydroxide for Superior Oxygen Evolution Reactivity.

    PubMed

    Wang, Ling; Huang, Xiaolei; Xue, Junmin

    2016-07-21

    Earth-abundant transition metal oxides and hydroxides have been intensively investigated as promising catalysts for the oxygen evolution reaction (OER). However, the overall OER performance of the transition metal oxides/hydroxides is largely jeopardized by their inherent low electrical conductivity. Mesoporous carbon has been a commonly used as a carrier material for these oxides/hydroxides to promote the electrical conductivity and provide a large specific surface area. However, most of the available mesoporous carbon carriers are amorphous. It has been very challenging to synthesize graphitic mesoporous carbon owing to the extremely high graphitization temperature. In this work, we report a new strategy used to prepare graphitic mesoporous carbon (GMC) by employing Fe metal as the graphitization catalyst. The graphitic carbon was obtained at 1000 °C, at which it retained its mesoporous structure. The conductivity of the obtained GMC was approximately 550 S m(-1) , which was almost ten times higher than that of amorphous carbon. The GMC was further loaded with Fe-Ni hydroxide to fabricate the OER catalyst. The obtained catalyst showed good OER activity with an overpotential of 320 mV at a current density of 10 mA cm(-2) and a low Tafel slope of 57 mV dec(-1) . The synthesized catalyst also possessed excellent stability, with almost no current drop even after 2000 cycles and at a constant voltage for 2 h. PMID:27312811

  7. Synthesis of ZSM-5 with intracrystal or intercrystal mesopores by polyvinyl butyral templating method.

    PubMed

    Zhu, Haibo; Liu, Zhicheng; Kong, Dejin; Wang, Yangdong; Yuan, Xiaohong; Xie, Zaiku

    2009-03-15

    Three facile routes were utilized to synthesize ZSM-5 materials with intracrystal or intercrystal mesopores, where the polyvinyl butyral gel served as mesopore directing template. The three routes were divided into two synthesis strategies: the hydrothermal treatment of silica/PVB composite and re-crystallization of preformed zeolite precursor with the assistance of PVB gel. The fabrication of silica/PVB composite was accomplished by two routes including sol-gel process and impregnation method. The resulting composite was undergone hydrothermal treatment. During the crystallization PVB was occluded in the ZSM-5 crystal, creating intracrystal mesopores in the zeolite. The last route for the synthesis of mesoporous ZSM-5 was realized by re-crystallization of preformed ZSM-5 zeolite in the presence of PVB. This route involved the pre-crystallization of the amorphous aluminosilicate to produce the pre-formed ZSM-5 precursor. Upon further crystallization of the mixture of PVB gel and pre-formed ZSM-5, the ZSM-5 precursor was transformed into ZSM-5 aggregate of nanocrystals, while the PVB gel was occluded in the ZSM-5 particles. Removal of the template generated the typical microporosity associated with ZSM-5 structure along with intercrystal mesoporosity produced from the PVB. The mesoporous ZSM-5 exhibited enhanced catalytic activity in the toluene disproportionation and transalkylation with C(9) and C(10) aromatics. PMID:19101681

  8. Curcumin loaded mesoporous silica: an effective drug delivery system for cancer treatment.

    PubMed

    Kotcherlakota, Rajesh; Barui, Ayan Kumar; Prashar, Sanjiv; Fajardo, Mariano; Briones, David; Rodríguez-Diéguez, Antonio; Patra, Chitta Ranjan; Gómez-Ruiz, Santiago

    2016-03-01

    In the present study, we report the delivery of anti-cancer drug curcumin to cancer cells using mesoporous silica materials. A series of mesoporous silica material based drug delivery systems (S2, S4 and S6) were first designed and developed through the amine functionalization of KIT-6, MSU-2 and MCM-41 followed by the loading of curcumin. The curcumin loaded materials were characterized with several physico-chemical techniques and thoroughly screened on cancer cells to evaluate their in vitro drug delivery efficacy. All the curcumin loaded silica materials exhibited higher cellular uptake and inhibition of cancer cell viability compared to pristine curcumin. The effective internalization of curcumin in cancer cells through the mesoporous silica materials initiated the generation of intracellular reactive oxygen species and the down regulation of poly ADP ribose polymerase (PARP) enzyme levels compared to free curcumin leading to the activation of apoptosis. This study shows that the anti-cancer activity of curcumin can be potentiated by loading onto mesoporous silica materials. Therefore, we strongly believe that mesoporous silica based curcumin loaded drug delivery systems may have future potential applications for the treatment of cancers. PMID:26674254

  9. Preparation, characterization and oxygen sensing properties of luminescent carbon dots assembled mesoporous silica microspheres.

    PubMed

    Wang, Li; Zhang, Haoran; Zhou, Xiaohua; Liu, Yingliang; Lei, Bingfu

    2016-09-15

    In this paper, our effort was focused on preparation and oxygen sensing of luminescence carbon dots (CDs) assembled hollow mesoporous silica microspheres (HMSMs) and mesoporous silica microspheres (MSMs). MSMs doped with CDs showed shorter response time and recovery time comparing with HMSMs doped with CDs. This feature can be attributed to ordered channel structure of mesoporous carrier which can promote the gas diffusion effectively. While HMSMs doped with CDs shows a higher oxygen quenching response and the degree of quenching reach 80.35%. The response time was determined to be about 7s and the emission intensities of the samples were effectively reduced as the concentration of oxygen increased. These results indicate that the system we have developed can be used for oxygen detection in wide concentration range and is especially accurate for very low oxygen concentrations. The obtained CDs grafted hollow mesoporous silica microspheres (HMSMs) and mesoporous silica microspheres (MSMs) samples appears to be a promising sensing material for environmental detection application and would also find applications in catalyst, electrode, or related fields. PMID:27309945

  10. Interleaved mesoporous copper for the anode catalysis in direct ammonium borane fuel cells.

    PubMed

    Auxilia, Francis M; Tanabe, Toyokazu; Ishihara, Shinsuke; Saravanan, Govindachetty; Ramesh, Gubbala V; Matsumoto, Futoshi; Ya, Xu; Ariga, Katsuhiko; Dakshanamoorthy, Arivuoli; Abe, Hideki

    2014-06-01

    Mesoporous materials with tailored microstructures are of increasing importance in practical applications particularly for energy generation and/or storage. Here we report a mesoporous copper material (MS-Cu) can be prepared in a hierarchical microstructure and exhibit high catalytic performance for the half-cell reaction of direct ammonium borane (NH3BH3) fuel cells (DABFs). Hierarchical copper oxide (CuO) nanoplates (CuO Npls) were first synthesized in a hydrothermal condition. CuO Npls were then reduced at room temperature using water solution of sodium borohydride (NaBH4) to yield the desired mesoporous copper material, MS-Cu, consisting of interleaved nanoplates with a high density of mesopores. The surface of MS-Cu comprised high-index facets, whereas a macroporous copper material (MC-Cu), which was prepared from CuO Npls at elevated temperatures in a hydrogen stream, was surrounded by low-index facets with a low density of active sites. MS-Cu exhibited a lower onset potential and improved durability for the electro-oxidation of NH3BH3 than MC-Cu or copper particles because of the catalytically active mesopores on the interleaved nanoplates. PMID:24738410

  11. Hierarchical porous silicon carbide with controlled micropores and mesopores for electric double layer capacitors

    NASA Astrophysics Data System (ADS)

    Kim, Myeongjin; Oh, Ilgeun; Kim, Jooheon

    2015-05-01

    Three-dimensional hierarchical micro and mesoporous silicon carbide spheres (MMPSiC) are prepared by the template method and carbonization reaction via the aerosol spray drying method. The mesopores are generated by the self-assembly of the structure-directing agents, whereas the micropores are derived from the partial evaporation of Si atoms during carbonization. To investigate the effect of mesopore size on electrochemical performance, three types of MMPSiC with different mesopore size were fabricated by using three different structure directing agents (cetyltriethylammonium bromide (CTAB), Polyethylene glycol hexadecyl ether (Brij56), and Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (P123)). The MMPSiC electrode prepared with Brij56 exhibits the highest charge storage capacity with a specific capacitance of 253.7 F g-1 at a scan rate of 5 mV s-1 and 87.9% rate performance from 5 to 500 mV s-1 in 1 M Na2SO4 aqueous electrolyte. The outstanding electrochemical performance might be because of the ideal mesopore size, which effectively reduces the resistant pathways for ion diffusion in the pores and provides a large accessible surface area for ion transport/charge storage. These encouraging results demonstrate that the MMPSiC prepared with Brij56 is a promising candidate for high performance electrode materials for supercapacitors.

  12. Nickel Nanofoam/Different Phases of Ordered Mesoporous Carbon Composite Electrodes for Superior Capacitive Energy Storage.

    PubMed

    Lee, Kangsuk; Song, Haeni; Lee, Kwang Hoon; Choi, Soo Hyung; Jang, Jong Hyun; Char, Kookheon; Son, Jeong Gon

    2016-08-31

    Electrochemical energy storage devices based on electric double layer capacitors (EDLCs) have received considerable attention due to their high power density and potential for obtaining improved energy density in comparison to the lithium ion battery. Ordered mesoporous carbon (OMC) is a promising candidate for use as an EDLC electrode because it has a high specific surface area (SSA), providing a wider charge storage space and size-controllable mesopore structure with a long-range order, suppling high accessibility to the electrolyte ions. However, OMCs fabricated using conventional methods have several drawbacks including low electronic conductivity and long ionic diffusion paths in mesopores. We used nickel nanofoam, which has a relatively small pore (sub-100 nm to subμm) network structure, as a current collector. This provides a significantly shortened electronic/ionic current paths and plentiful surface area, enabling stable and close attachment of OMCs without the use of binders. Thus, we present hierarchical binder-free electrode structures based on OMC/Ni nanofoams. These structures give rise to enhanced specific capacitance and a superior rate capability. We also investigated the mesopore structural effect of OMCs on electrolyte transport by comparing the capacitive performances of collapsed lamellar, cylindrical, and spherical mesopore electrodes. The highly ordered and straightly aligned cylindrical OMCs exhibited the highest specific capacitance and the best rate capability. PMID:27490161

  13. High-activity mesoporous Pt/Ru catalysts for methanol oxidation.

    PubMed

    Franceschini, Esteban A; Bruno, Mariano M; Williams, Federico J; Viva, Federico A; Corti, Horacio R

    2013-11-13

    High activity mesoporous Pt/Ru catalysts with 2D-hexagonal structure were synthesized using a triblock poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) copolymer (Pluronic F127) template. The normalized mass activities for the methanol oxidation reaction (MOR) of the Pt/Ru catalysts with a regular array of pores is higher than those reported for nanoparticulated Pt/Ru catalysts. Different kinetic parameters, as Tafel slope and activation energy, were obtained for the MOR on the mesoporous catalysts. Results indicated that catalysts performance depends on pore size. Mass activities and the CO2 conversion efficiency for large pore size mesoporous catalysts (10 nm) are greater than those reported for smaller pore size mesoporous catalysts with similar composition. The effect of pore size on catalysts performance is related to the greater accessibility of methanol to the active areas inside large pores. Consequently, the overall residence time of methanol increases as compared with mesoporous catalyst with small pores. PMID:24083938

  14. Mesoporous mixed metal oxides derived from P123-templated Mg-Al layered double hydroxides

    SciTech Connect

    Wang Jun; Zhou Jideng; Li Zhanshuang; He Yang; Lin Shuangshuang; Liu Qi; Zhang Milin; Jiang Zhaohua

    2010-11-15

    We report the preparation of mesoporous mixed metal oxides (MMOs) through a soft template method. Different amounts of P123 were used as structure directing agent to synthesize P123-templated Mg-Al layered double hydroxides (LDHs). After calcination of as-synthesized LDHs at 500 {sup o}C, the ordered mesopores were obtained by removal of P123. The mesoporous Mg-Al MMOs fabricated by using 2 wt% P123 exhibited a high specific surface area of 108.1 m{sup 2}/g, and wide distribution of pore size (2-18 nm). An investigation of the 'memory effect' of the mesoporous MMOs revealed that they were successfully reconstructed to ibuprofen intercalated LDHs having different gallery heights, which indicated different intercalation capacities. Due to their mesoporosity these unique MMOs have particular potential as drug or catalyst carriers. - Graphical abstract: Ordered mesoporous Mg-Al MMOs can be obtained through the calcination of P123-templated Mg-Al-CO{sub 3} LDHs. The pore diameter is 2.2 nm. At the presence of ibuprofen, the Mg-Al MMOs can recover to Mg-Al-IBU LDHs, based on its 'remember effect'. Display Omitted

  15. Development of novel mesoporous silicates for bioseparations and biocatalysis

    NASA Astrophysics Data System (ADS)

    Katiyar, Amit

    The recent growth of the biopharmaceutical industry is due to the discovery of monoclonal antibodies and recombinant DNA technologies. Large-scale production of therapeutic proteins and monoclonal antibodies requires efficient technologies to separate products from complex synthesis mixtures. Chromatography is widely used for this purpose at both the analytical and process scales. Research in the last three decades has provided an improved understanding of the thermodynamic and mass transfer effects underlying the chromatographic behavior of biomolecules, leading to improvements in chromatographic equipment, separation media, and operating procedures. This dissertation reports on the development of ordered mesoporous silica-based adsorbents for chromatographic protein separations. The synthesis of mesoporous materials with different structural properties is reported here. Protein adsorption and enzymatic catalysis studies were conducted to evaluate the chromatographic performance of these materials. Initial studies focused on small pore materials (MCM-41), which had high protein adsorption capacities. These high protein loadings were attributed to high external surface area (˜600 m 2/g), meaning that MCM-41 materials are of limited use for size-selective chromatographic protein separation. Synthesis strategies were developed to produce large pore fibrous and spherical SBA-15 particles. The effects of synthesis conditions on particle properties are presented. Large pore Spherical ordered SBA-15 materials were used to demonstrate for the first time the size-selective separation of proteins. BSA and lysozyme were tagged with fluorescent molecules, allowing direct visualization of the size selective separation of these proteins. Flow microcalorimetry (FMC) results were used to interpret the size-selective behavior of these materials. The potential of siliceous SBA-15 materials to serve as hosts for enzymes in biocatalytic transformations was also explored. Materials

  16. A reversible light-operated nanovalve on mesoporous silica nanoparticles

    NASA Astrophysics Data System (ADS)

    Tarn, Derrick; Ferris, Daniel P.; Barnes, Jonathan C.; Ambrogio, Michael W.; Stoddart, J. Fraser; Zink, Jeffrey I.

    2014-02-01

    Two azobenzene α-cyclodextrin based nanovalves are designed, synthesized and assembled on mesoporous silica nanoparticles. Under aqueous conditions, the cyclodextrin cap is tightly bound to the azobenzene moiety and capable of holding back loaded cargo molecules. Upon irradiation with a near-UV light laser, trans to cis-photoisomerization of azobenzene initiates a dethreading process, which causes the cyclodextrin cap to unbind followed by the release of cargo. The addition of a bulky stopper to the end of the stalk allows this design to be reversible; complete dethreading of cyclodextrin as a result of unbinding with azobenzene is prevented as a consequence of steric interference. As a result, thermal relaxation of cis- to trans-azobenzene allows for the rebinding of cyclodextrin and resealing of the nanopores, a process which entraps the remaining cargo. Two stalks were designed with different lengths and tested with alizarin red S and propidium iodide. No cargo release was observed prior to light irradiation, and the system was capable of multiuse. On/off control was also demonstrated by monitoring the release of cargo when the light stimulus was applied and removed, respectively.Two azobenzene α-cyclodextrin based nanovalves are designed, synthesized and assembled on mesoporous silica nanoparticles. Under aqueous conditions, the cyclodextrin cap is tightly bound to the azobenzene moiety and capable of holding back loaded cargo molecules. Upon irradiation with a near-UV light laser, trans to cis-photoisomerization of azobenzene initiates a dethreading process, which causes the cyclodextrin cap to unbind followed by the release of cargo. The addition of a bulky stopper to the end of the stalk allows this design to be reversible; complete dethreading of cyclodextrin as a result of unbinding with azobenzene is prevented as a consequence of steric interference. As a result, thermal relaxation of cis- to trans-azobenzene allows for the rebinding of cyclodextrin and

  17. Gated silica mesoporous supports for controlled release and signaling applications.

    PubMed

    Coll, Carmen; Bernardos, Andrea; Martínez-Máñez, Ramón; Sancenón, Félix

    2013-02-19

    Blending molecular and supramolecular advances with materials science has resulted in recent years in the development of new organic-inorganic hybrid materials displaying innovative functionalities. One appealing concept in this field is the development of gated nanodevices. These materials are prepared by grafting molecular or supramolecular caps onto the external surface of mesoporous inorganic scaffolds loaded with a particular cargo. The caps or "gates" can then be opened and the cargo delivered at will upon the application of a given stimulus. In this Account, we report some of the recent advances we have made in designing such materials for drug delivery and as new chromo-fluorogenic probes. For controlled release applications, we have prepared capped hybrid mesoporous supports capable of being selectively opened by applying certain physical and chemical stimuli. We report examples of gated materials opened by changes in pH (using polyamines as caps), light (employing spiropyran derivatives or gold nanoparticles), and temperature (using selected paraffins). We also report gated materials opened by enzymes that cleave capping molecules based on lactose, hydrolyzed starch, and peptides. The use of enzymes is especially appealing because molecular caps built of enzyme-specific sequences made of peptides or other cleavable molecules could allow on-command delivery of drugs and biomolecules in specialized contexts. In the second part of the manuscript, we revisit the possibility of using hybrid gated nanomaterials as sensory systems. In such systems, when target analytes interact with the cap, their presence triggers the transport of a dye from pores to the solution, resulting in a chromo-fluorogenic signal that allows their detection. Two approaches are possible. In the first one, pores remain open and the dye can diffuse into the solution, until the presence of a target analyte binds to receptors in the caps and closes the gate. In the second approach, the caps

  18. Surfactant-assisted Nanocasting Route for Synthesis of Highly Ordered Mesoporous Graphitic Carbon and Its Application in CO2 Adsorption

    NASA Astrophysics Data System (ADS)

    Wang, Yangang; Bai, Xia; Wang, Fei; Qin, Hengfei; Yin, Chaochuang; Kang, Shifei; Li, Xi; Zuo, Yuanhui; Cui, Lifeng

    2016-05-01

    Highly ordered mesoporous graphitic carbon was synthesized from a simple surfactant-assisted nanocasting route, in which ordered mesoporous silica SBA-15 maintaining its triblock copolymer surfactant was used as a hard template and natural soybean oil (SBO) as a carbon precursor. The hydrophobic domain of the surfactant assisted SBO in infiltration into the template’s mesoporous channels. After the silica template was carbonized and removed, a higher yield of highly-ordered graphitic mesoporous carbon with rod-like morphology was obtained. Because of the improved structural ordering, the mesoporous carbon after amine modification could adsorb more CO2 compared with the amine-functionalized carbon prepared without the assistance of surfactant.

  19. Preparation of mesoporous CdS-containing TiO{sub 2} film and enhanced visible light photocatalytic property

    SciTech Connect

    Zhu, Yanmei; Wang, Renliang Zhang, Wenping; Ge, Haiyan; Wang, Xiaopeng; Li, Li

    2015-01-15

    Highlights: • Well-dispersed distribution of CdS nanoparticles inside of TiO{sub 2} mesoporous structures was fabricated. • The sensitization of CdS nanoparticles significantly extends the response of TiO{sub 2} mesoporous film in the visible region. • An improved visible light photocatalytic activity was observed by the CdS–MTF. - Abstract: Mesoporous TiO{sub 2} films containing CdS nanocrystals were successfully fabricated by a two-step process of successive ionic layer adsorption and reaction (SILAR) technique and a solvothermal method followed by annealing. The distribution of CdS nanoparticles in the inner structures of the TiO{sub 2} mesoporous films is confirmed by field emission scanning electron microscope. The CdS modification of the mesoporous films results in an increase in the visible light adsorption, and exhibits more excellent photocatalytic degradation of methyl orange (MO) under visible light irradiation.

  20. Surfactant-assisted Nanocasting Route for Synthesis of Highly Ordered Mesoporous Graphitic Carbon and Its Application in CO2 Adsorption

    PubMed Central

    Wang, Yangang; Bai, Xia; Wang, Fei; Qin, Hengfei; Yin, Chaochuang; Kang, Shifei; Li, Xi; Zuo, Yuanhui; Cui, Lifeng

    2016-01-01

    Highly ordered mesoporous graphitic carbon was synthesized from a simple surfactant-assisted nanocasting route, in which ordered mesoporous silica SBA-15 maintaining its triblock copolymer surfactant was used as a hard template and natural soybean oil (SBO) as a carbon precursor. The hydrophobic domain of the surfactant assisted SBO in infiltration into the template’s mesoporous channels. After the silica template was carbonized and removed, a higher yield of highly-ordered graphitic mesoporous carbon with rod-like morphology was obtained. Because of the improved structural ordering, the mesoporous carbon after amine modification could adsorb more CO2 compared with the amine-functionalized carbon prepared without the assistance of surfactant. PMID:27220563