Science.gov

Sample records for rare earth sesquichalcogenides

  1. Improved method for preparing rare earth sesquichalcogenides

    DOEpatents

    Takeshita, T.; Beaudry, B.J.; Gschneidner, K.A. Jr.

    1982-04-14

    An improved method for the preparation of high purity rare earth sesquichalcogenides is described. The rare earth, as one or more pieces of the metal, is sealed under a vacuum with a stoichiometric amount of sulfur or selenium and a small amount of iodine into a quartz reaction vessel. The sealed vessel is then heated to above the vaporization temperature of the chalcogen and below the melting temperature of the rare earth metal and maintained until the product has been formed. The iodine is then vaporized off leaving a pure product. The rare earth sulfides and selenides thus formed are useful as semiconductors and as thermoelectric generators. 3 tables.

  2. Rare earth gas laser

    DOEpatents

    Krupke, W.F.

    1975-10-31

    A high energy gas laser with light output in the infrared or visible region of the spectrum is described. Laser action is obtained by generating vapors of rare earth halides, particularly neodymium iodide or, to a lesser extent, neodymium bromide, and disposing the rare earth vapor medium in a resonant cavity at elevated temperatures; e.g., approximately 1200/sup 0/ to 1400/sup 0/K. A particularly preferred gaseous medium is one involving a complex of aluminum chloride and neodymium chloride, which exhibits tremendously enhanced vapor pressure compared to the rare earth halides per se, and provides comparable increases in stored energy densities.

  3. Ames Lab 101: Rare Earths

    SciTech Connect

    Gschneidner, Karl

    2010-01-01

    "Mr. Rare Earth," Ames Laboratory scientist Karl Gschneidner Jr., explains the importance of rare-earth materials in many of the technologies we use today -- ranging from computers to hybrid cars to wind turbines. Gschneidner is a world renowned rare-earths expert at the U.S. Department of Energy's Ames Laboratory.

  4. Ames Lab 101: Rare Earths

    ScienceCinema

    Gschneidner, Karl

    2012-08-29

    "Mr. Rare Earth," Ames Laboratory scientist Karl Gschneidner Jr., explains the importance of rare-earth materials in many of the technologies we use today -- ranging from computers to hybrid cars to wind turbines. Gschneidner is a world renowned rare-earths expert at the U.S. Department of Energy's Ames Laboratory.

  5. China's rare-earth industry

    USGS Publications Warehouse

    Tse, Pui-Kwan

    2011-01-01

    Introduction China's dominant position as the producer of over 95 percent of the world output of rare-earth minerals and rapid increases in the consumption of rare earths owing to the emergence of new clean-energy and defense-related technologies, combined with China's decisions to restrict exports of rare earths, have resulted in heightened concerns about the future availability of rare earths. As a result, industrial countries such as Japan, the United States, and countries of the European Union face tighter supplies and higher prices for rare earths. This paper briefly reviews China's rare-earth production, consumption, and reserves and the important policies and regulations regarding the production and trade of rare earths, including recently announced export quotas. The 15 lanthanide elements-lanthanum, cerium, praseodymium, neodymium, promethium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, and lutetium (atomic numbers 57-71)-were originally known as the rare earths from their occurrence in oxides mixtures. Recently, some researchers have included two other elements-scandium and yttrium-in their discussion of rare earths. Yttrium (atomic number 39), which lies above lanthanum in transition group III of the periodic table and has a similar 3+ ion with a noble gas core, has both atomic and ionic radii similar in size to those of terbium and dysprosium and is generally found in nature with lanthanides. Scandium (atomic number 21) has a smaller ionic radius than yttrium and the lanthanides, and its chemical behavior is intermediate between that of aluminum and the lanthanides. It is found in nature with the lanthanides and yttrium. Rare earths are used widely in high-technology and clean-energy products because they impart special properties of magnetism, luminescence, and strength. Rare earths are also used in weapon systems to obtain the same properties.

  6. The Not-So-Rare Earths.

    ERIC Educational Resources Information Center

    Muecke, Gunter K.; Moller, Peter

    1988-01-01

    Describes the characteristics of rare earth elements. Details the physical chemistry of rare earths. Reviews the history of rare earth chemistry and mineralogy. Discusses the mineralogy and crystallography of the formation of rare earth laden minerals found in the earth's crust. Characterizes the geologic history of rare earth elements. (CW)

  7. Phase stable rare earth garnets

    SciTech Connect

    Kuntz, Joshua D.; Cherepy, Nerine J.; Roberts, Jeffery J.; Payne, Stephen A.

    2013-06-11

    A transparent ceramic according to one embodiment includes a rare earth garnet comprising A.sub.hB.sub.iC.sub.jO.sub.12, where h is 3.+-.10%, i is 2.+-.10%, and j is 3.+-.10%. A includes a rare earth element or a mixture of rare earth elements, B includes at least one of aluminum, gallium and scandium, and C includes at least one of aluminum, gallium and scandium, where A is at a dodecahedral site of the garnet, B is at an octahedral site of the garnet, and C is at a tetrahedral site of the garnet. In one embodiment, the rare earth garment has scintillation properties. A radiation detector in one embodiment includes a transparent ceramic as described above and a photo detector optically coupled to the rare earth garnet.

  8. Rare Earth Optical Temperature Sensor

    NASA Technical Reports Server (NTRS)

    Chubb, Donald L. (Inventor); Jenkins, Phillip (Inventor)

    2004-01-01

    A rare earth optical temperature sensor is disclosed for measuring high temperatures. Optical temperature sensors exist that channel emissions from a sensor to a detector using a light pipe. The invention uses a rare earth emitter to transform the sensed thermal energy into a narrow band width optical signal that travels to a detector using a light pipe. An optical bandpass filter at the detector removes any noise signal outside of the band width of the signal from the emitter.

  9. Selective Emitter Pumped Rare Earth Laser

    NASA Technical Reports Server (NTRS)

    Chubb, Donald L. (Inventor); Patton, Martin O. (Inventor)

    2001-01-01

    A selective emitter pumped rare earth laser provides an additional type of laser for use in many laser applications. Rare earth doped lasers exist which are pumped with flashtubes or laser diodes. The invention uses a rare earth emitter to transform thermal energy input to a spectral band matching the absorption band of a rare earth in the laser in order to produce lasing.

  10. Rare Earth Garnet Selective Emitter

    NASA Technical Reports Server (NTRS)

    Lowe, Roland A.; Chubb, Donald L.; Farmer, Serene C.; Good, Brian S.

    1994-01-01

    Thin film Ho-YAG and Er-YAG emitters with a platinum substrate exhibit high spectral emittance in the emission band (epsilon(sub lambda) approx. = 0.75, sup 4)|(sub 15/2) - (sup 4)|(sub 13/2),for Er-YAG and epsilon(sub lambda) approx. = 0.65, (sup 5)|(sub 7) - (sup 5)|(sub 8) for Ho-YAG) at 1500 K. In addition, low out-of-band spectral emittance, epsilon(sub lambda) less than 0.2, suggest these materials would be excellent candidates for high efficiency selective emitters in thermophotovoltaic (TPV) systems operating at moderate temperatures (1200-1500 K). Spectral emittance measurements of the thin films were made (1.2 less than lambda less than 3.0 microns) and compared to the theoretical emittances calculated using measured values of the spectral extinction coefficient. In this paper we present the results for a new class of rare earth ion selective emitters. These emitters are thin sections (less than 1 mm) of yttrium aluminum garnet (YAG) single crystal with a rare earth substitutional impurity. Selective emitters in the near IR are of special interest for thermophotovoltaic (TPV) energy conversion. The most promising solid selective emitters for use in a TPV system are rare earth oxides. Early spectral emittance work on rare earth oxides showed strong emission bands in the infrared (0.9 - 3 microns). However, the emittance outside the emission band was also significant and the efficiency of these emitters was low. Recent improvements in efficiency have been made with emitters fabricated from fine (5 - 10 microns) rare earth oxide fibers similar to the Welsbach mantle used in gas lanterns. However, the rare earth garnet emitters are more rugged than the mantle type emitters. A thin film selective emitter on a low emissivity substrate such as gold, platinum etc., is rugged and easily adapted to a wide variety of thermal sources. The garnet structure and its many subgroups have been successfully used as hosts for rare earth ions, introduced as substitutional

  11. Rare Earth Optical Temperature Sensor

    NASA Technical Reports Server (NTRS)

    Chubb, Donald L.; Wolford, David S.

    2000-01-01

    A new optical temperature sensor suitable for high temperatures (greater than 1700 K) and harsh environments is introduced. The key component of the sensor is the rare earth material contained at the end of a sensor that is in contact with the sample being measured. The measured narrow wavelength band emission from the rare earth is used to deduce the sample temperature. A simplified relation between the temperature and measured radiation was verified experimentally. The upper temperature limit of the sensor is determined by material limits to be approximately 2000 C. The lower limit, determined by the minimum detectable radiation, is found to be approximately 700 K. At high temperatures 1 K resolution is predicted. Also, millisecond response times are calculated.

  12. Scarcity of rare earth elements.

    PubMed

    de Boer, M A; Lammertsma, K

    2013-11-01

    Rare earth elements (REEs) are important for green and a large variety of high-tech technologies and are, therefore, in high demand. As a result, supply with REEs is likely to be disrupted (the degree of depends on the REE) in the near future. The 17 REEs are divided into heavy and light REEs. Other critical elements besides REEs, identified by the European Commission, are also becoming less easily available. Although there is no deficiency in the earth's crust of rare earth oxides, the economic accessibility is limited. The increased demand for REEs, the decreasing export from China, and geopolitical concerns on availability contributed to the (re)opening of mines in Australia and the USA and other mines are slow to follow. As a result, short supply of particularly terbium, dysprosium, praseodymium, and neodymium is expected to be problematic for at least the short term, also because they cannot be substituted. Recycling REEs from electronic waste would be a solution, but so far there are hardly any established REE recycling methods. Decreasing the dependency on REEs, for example, by identifying possible replacements or increasing their efficient use, represents another possibility. PMID:24009098

  13. Production method for making rare earth compounds

    DOEpatents

    McCallum, R.W.; Ellis, T.W.; Dennis, K.W.; Hofer, R.J.; Branagan, D.J.

    1997-11-25

    A method of making a rare earth compound, such as a earth-transition metal permanent magnet compound, without the need for producing rare earth metal as a process step, comprises carbothermically reacting a rare earth oxide to form a rare earth carbide and heating the rare earth carbide, a compound-forming reactant (e.g., a transition metal and optional boron), and a carbide-forming element (e.g., a refractory metal) that forms a carbide that is more thermodynamically favorable than the rare earth carbide whereby the rare earth compound (e.g., Nd{sub 2}Fe{sub 14}B or LaNi{sub 5}) and a carbide of the carbide-forming element are formed.

  14. Production method for making rare earth compounds

    DOEpatents

    McCallum, R. William; Ellis, Timothy W.; Dennis, Kevin W.; Hofer, Robert J.; Branagan, Daniel J.

    1997-11-25

    A method of making a rare earth compound, such as a earth-transition metal permanent magnet compound, without the need for producing rare earth metal as a process step, comprises carbothermically reacting a rare earth oxide to form a rare earth carbide and heating the rare earth carbide, a compound-forming reactant (e.g. a transition metal and optional boron), and a carbide-forming element (e.g. a refractory metal) that forms a carbide that is more thermodynamically favorable than the rare earth carbide whereby the rare earth compound (e.g. Nd.sub.2 Fe.sub.14 B or LaNi.sub.5) and a carbide of the carbide-forming element are formed.

  15. Rare earths, the lanthanides, yttrium and scandium

    USGS Publications Warehouse

    Hedrick, J.B.

    2006-01-01

    In 2005, rare earths were not mined in the United States. The major supplier, Molycorp, continued to maintain a large stockpile of rare-earth concentrates and compounds. Consumption decreased of refined rare-earth products. The United States remained a major importer and exporter of rare earths in 2005. During the same period, yttrium was not mined or refined in the US. Hence, supply of yttrium compounds for refined yttrium products came from China, France and Japan. Scandium was not also mined. World production was primarily in China, Russia and Ukraine. Demand for rare earths in 2006 is expected to be closely tied to economic conditions in the US.

  16. Rare earth garnet selective emitter

    NASA Technical Reports Server (NTRS)

    Lowe, Roland A.; Chubb, Donald L.; Farmer, Serene C.; Good, Brian S.

    1994-01-01

    Thin film Ho-YAG and Er-YAG emitters with a platinum substrate exhibit high spectral emittance in the emission band (epsilon(sub lambda) approximately equal to 0.74, ((4)l(sub 15/2)) - ( (4)l(sub13/2)), for Er-YAG and epsilon(sub lambda) approximately equal to 0.65, ((5)l(sub 7))-((5)l(sub 8)) for Ho-YAG) at excellent candidates for high efficiency selective emitters in the thermophotovoltaics (TPV) systems operating at moderate temperatures (1200-1500K). Spectral emittance measurements of the thin films were made (1.2 less than lambda less than 3.0 microns) and compared to the theoretical emittances calculated using measured values of the spectral extinction coefficient. In this paper we present the results for a new class of rare earth ion selective emitters. These emitters are thin sections (less than 1 mm) of yttrium aluminum garnet (YAG) single crystal with a rare earth substitutional impurity. This paper presents normal spectral emittance, epsilon(sub lambda), measurements of holmium (Ho), and erbium (Er) doped YAG thin film selective emitters at 1500 K, and compares those results with the theoretical spectral emittance.

  17. Rare earth garnet selective emitter

    SciTech Connect

    Lowe, R.A.; Chubb, D.L.; Farmer, S.C.; Good, B.S.

    1994-09-01

    Thin film Ho-YAG and Er-YAG emitters with a platinum substrate exhibit high spectral emittance in the emission band (epsilon{sub {lambda}}) approximately equal to 0.74, ((4)l{sub 15/2}) - ((4)l{sub 13/2}), for Er-YAG and epsilon{sub {lambda}} approximately equal to 0.65, ((5)l{sub 7})-((5)l{sub 8}) for (Ho-YAG) at excellent candidates for high efficiency selective emitters in the thermophotovoltaics (TPV) systems operating at moderate temperatures (1200-1500K). Spectral emittance measurements of the thin films were made (1.2 less than lambda less than 3.0 microns) and compared to the theoretical emittances calculated using measured values of the spectral extinction coefficient. In this paper the authors present the results for a new class of rare earth ion selective emitters. These emitters are thin sections (less than 1 mm) of yttrium aluminum garnet (YAG) single crystal with a rare earth substitutional impurity. This paper presents normal spectral emittance, epsilon{sub {lambda}} measurements of holmium (Ho), and erbium (Er) doped YAG thin film selective emitters at 1500 K, and compares those results with the theoretical spectral emittance.

  18. Rare earths, the lanthanides, yttrium and scandium

    USGS Publications Warehouse

    Bedinger, G.; Bleiwas, D.

    2012-01-01

    In 2011, rare earths were recovered from bastnasite concentrates at the Mountain Pass Mine in California. Consumption of refined rare-earth products decreased in 2011 from 2010. U.S. rare-earth imports originated primarily from China, with lesser amounts from Austria, Estonia, France and Japan. The United States imported all of its demand for yttrium metal and yttrium compounds, with most of it originating from China. Scandium was imported in various forms and processed domestically.

  19. Alaska's rare earth deposits and resource potential

    USGS Publications Warehouse

    Barker, James C.; Van Gosen, Bradley S.

    2012-01-01

    Alaska’s known mineral endowment includes some of the largest and highest grade deposits of various metals, including gold, copper and zinc. Recently, Alaska has also been active in the worldwide search for sources of rare earth elements (REE) to replace exports now being limitedby China. Driven by limited supply of the rare earths, combined with their increasing use in new ‘green’ energy, lighting, transportation, and many other technological applications, the rare earth metals neodymium, europium and, in particular, the heavy rare earth elements terbium, dysprosium and yttrium are forecast to soon be in critical short supply (U.S. Department of Energy, 2010).

  20. Ames Lab 101: Rare-Earth Recycling

    SciTech Connect

    Ryan Ott

    2012-09-05

    Recycling keeps paper, plastics, and even jeans out of landfills. Could recycling rare-earth magnets do the same? Perhaps, if the recycling process can be improved. Scientists at the U.S. Department of Energy's Ames Laboratory are working to more effectively remove the neodymium, a rare earth, from the mix of other materials in a magnet.

  1. Ternary rare earth-lanthanide sulfides

    DOEpatents

    Takeshita, Takuo; Gschneidner JR., Karl A.; Beaudry, Bernard J.

    1987-01-06

    A new ternary rare earth sulfur compound having the formula: where M is a rare earth element selected from the group europium, samarium and ytterbium and x=0.15 to 0.8. The compound has good high-temperature thermoelectric properties and exhibits long-term structural stability up to 1000.degree. C.

  2. Ames Lab 101: Rare-Earth Recycling

    ScienceCinema

    Ryan Ott

    2013-06-05

    Recycling keeps paper, plastics, and even jeans out of landfills. Could recycling rare-earth magnets do the same? Perhaps, if the recycling process can be improved. Scientists at the U.S. Department of Energy's Ames Laboratory are working to more effectively remove the neodymium, a rare earth, from the mix of other materials in a magnet.

  3. Rare Earth Metals: Resourcefulness and Recovery

    NASA Astrophysics Data System (ADS)

    Wang, Shijie

    2013-10-01

    When we appreciate the digital revolution carried over from the twentieth century with mobile communication and the Internet, and when we enjoy our high-tech lifestyle filled with iDevices, hybrid cars, wind turbines, and solar cells in this new century, we should also appreciate that all of these advanced products depend on rare earth metals to function. Although there are only 136,000 tons of annual worldwide demand, (Cho, Rare Earth Metals, Will We Have Enough?)1 rare earth metals are becoming such hot commodities on international markets, due to not only to their increasing uses, including in most critical military hardware, but also to Chinese growth, which accounts for 95% of global rare earth metal production. Hence, the 2013 technical calendar topic, planned by the TMS/Hydrometallurgy and Electrometallurgy Committee, is particularly relevant, with four articles (including this commentary) contributed to the JOM October Issue discussing rare earth metals' resourcefulness and recovery.

  4. Soluble rare-earth chalcogenides

    NASA Astrophysics Data System (ADS)

    Pernin, Christopher G.

    1999-11-01

    The cluster Eu8(DMF)13(mu4-O)(mu 3-OH)12(Se3)(Se4)2(Se 5)2 was synthesized from the reaction of EuCl3 dissolved in tetrahydrofaran with K2Se4 dissolved in N,N-dimethylformamide (DMF). The Eu8(O)(OH)12 10+ core is the first example such a polyoxometallo-core. The compound is further unusual in that it contains three different polyselenide chain lengths attaching adjacent Eu atoms. A similar reaction between Ln Cl3·6H2O and K2Se4 in DMF was found to produce the cluster compounds Gd8(DMF) 13(mu4-O)(mu3-OH)12(Se3)(Se 4)2(Se5)2, Yb8 (DMF) 11(mu4-O)(mu3-OH)12(Se4) 2(Se5)2Cl2·(DMF), and Y 8(DMF)12(mu4-O)(mu3-OH)12 (Se4)4Cl2·(DMF)6. Each of these clusters has a similar Ln8(mu 4-OH)(mu3-OH)1210+ core coordinated by a variety of polyselenide and chloride ligands. The organometallic rare-earth chalcogenide compounds (C5H 5)2Y [N( Q PPh2)2] ( Q = S, Se) have been prepared in good yield from the protonolysis reaction between CP3Y and HN( Q PPh2)2 in THF. In both compounds, the [N( Q PPh2)2]-- ligand is bound eta 3 to the Y center. The Y atom is also coordinated to two (C5 H5)-- ligands and so is formally 9-coordinate. 1H, 31P, 77Se, and 89Y NMR data indicate that the solid state connectivity is retained in solution. The compounds (C5H5)2Ln[N( Q PPh2)2] (Ln = La, Gd, Er, Yb, for Q = Se; Ln = Yb for Q = S) were synthesized. The series of compounds indicates that the smaller rare-earth elements cannot accommodate eta3-bonding from the imidodiphosphinochalcogenido ligand. The compounds Y[N( Q PPh2)2]3 ( Q = S (1), Se(2)) have been synthesized from the reactions between Y[N(SiMe3)2]3 and HN( Q PPh2)2. In 1, the Y atom is surrounded by three similar [N(SPPh2)2]-- ligands bound eta3 through two S atoms and an N atom. In 2 , the Y atom is surrounded again by three [N(SePPh2) 2]-- ligands, but two are bound eta2 through the two Se atoms and the other ligand is bound eta3 through the two Se atoms and an N atom. Although a fluxional process is detected in the 31P and 77Se NMR spectra

  5. High temperature rare earth solid lubricants

    NASA Technical Reports Server (NTRS)

    Sliney, H. E.

    1970-01-01

    Rare earth trifluorides have potential use as lubricating fillers for mechanical carbons and as coatings on metallic substrates. Friction experiments show that they are effective in reducing metallic wear.

  6. Ternary rare earth-lanthanide sulfides

    DOEpatents

    Takeshita, Takuo; Gschneidner, Jr., Karl A.; Beaudry, Bernard J.

    1987-01-06

    A new ternary rare earth sulfur compound having the formula: La.sub.3-x M.sub.x S.sub.4 where M is a rare earth element selected from the group europium, samarium and ytterbium and x=0.15 to 0.8. The compound has good high-temperature thermoelectric properties and exhibits long-term structural stability up to 1000.degree. C.

  7. Rare earth element scavenging in seawater

    NASA Astrophysics Data System (ADS)

    Byrne, Robert H.; Kim, Ki-Hyun

    1990-10-01

    Examinations of rare earth element (REE) adsorption in seawater, using a variety of surface-types, indicated that, for most surfaces, light rare earth elements (LREEs) are preferentially adsorbed compared to the heavy rare earths (HREEs). Exceptions to this behavior were observed only for silica phases (glass surfaces, acid-cleaned diatomaceous earth, and synthetic SiO 2). The affinity of the rare earths for surfaces can be strongly affected by thin organic coatings. Glass surfaces which acquired an organic coating through immersion in Tampa Bay exhibited adsorptive behavior typical of organic-rich, rather than glass, surfaces. Models of rare earth distributions between seawater and carboxylate-rich surfaces indicate that scavenging processes which involve such surfaces should exhibit a strong dependence on pH and carbonate complexation. Scavenging models involving carboxylate surfaces produce relative REE abundance patterns in good general agreement with observed shale-normalized REE abundances in seawater. Scavenging by carboxylate-rich surfaces should produce HREE enrichments in seawater relative to the LREEs and may produce enrichments of lanthanum relative to its immediate trivalent neighbors. Due to the origin of distribution coefficients as a difference between REE solution complexation (which increases strongly with atomic number) and surface complexation (which apparently also increases with atomic number) the relative solution abundance patterns of the REEs produced by scavenging reactions can be quite complex.

  8. Rare earth elements and permanent magnets (invited)

    NASA Astrophysics Data System (ADS)

    Dent, Peter C.

    2012-04-01

    Rare earth (RE) magnets have become virtually indispensible in a wide variety of industries such as aerospace, automotive, electronics, medical, and military. RE elements are essential ingredients in these high performance magnets based on intermetallic compounds RECo5, RE2TM17 (TM: transition metal), and RE2TM14B. Rare earth magnets are known for their superior magnetic properties—high induction, and coercive force. These properties arise due to the extremely high magnetocrystalline anisotropy made possible by unique 3d-4f interactions between transition metals and rare earths. For more than 40 years, these magnets remain the number one choice in applications that require high magnetic fields in extreme operating conditions—high demagnetization forces and high temperature. EEC produces and specializes in RECo5 and RE2TM17 type sintered magnets. Samarium and gadolinium are key RE ingredients in the powder metallurgical magnet production processes which include melting, crushing, jet milling, pressing, sintering, and heat treating. The magnetic properties and applications of these magnets will be discussed. We will also briefly discuss the past, current, and future of the permanent magnet business. Currently, over 95% of all pure rare earth oxides are sourced from China, which currently controls the market. We will provide insights regarding current and potential new magnet technologies and designer choices, which may mitigate rare earth supply chain issues now and into the future.

  9. Rare earth phosphors and phosphor screens

    DOEpatents

    Buchanan, Robert A.; Maple, T. Grant; Sklensky, Alden F.

    1981-01-01

    This invention relates to rare earth phosphor screens for converting image carrying incident radiation to image carrying visible or near-visible radiation and to the rare earth phosphor materials utilized in such screens. The invention further relates to methods for converting image carrying charged particles to image carrying radiation principally in the blue and near-ultraviolet region of the spectrum and to stabilized rare earth phosphors characterized by having a continuous surface layer of the phosphors of the invention. More particularly, the phosphors of the invention are oxychlorides and oxybromides of yttrium, lanthanum and gadolinium activated with trivalent cerium and the conversion screens are of the type illustratively including x-ray conversion screens, image amplifier tube screens, neutron imaging screens, cathode ray tube screens, high energy gamma ray screens, scintillation detector screens and screens for real-time translation of image carrying high energy radiation to image carrying visible or near-visible radiation.

  10. Preparation and processing of rare earth chalcogenides

    SciTech Connect

    Gschneidner, K.A. Jr.

    1998-10-01

    Rare earth chalcogenides are initially prepared by a direct combination of the pure rare earth metal and the pure chalcogen element with or without a catalyst. The use of iodine (10 to 100 mg) as a fluxing agent (catalyst), especially to prepare heavy lanthanide chalcogenides, greatly speeds up the formation of the rare earth chalcogenide. The resultant powders are consolidated by melting, pressure assisted sintering (PAS), or pressure assisted reaction sintering (PARS) to obtain near theoretical density solids. Mechanical alloying is a useful technique for preparing ternary alloys. In addition, mechanical alloying and mechanical milling can be used to form metastable allotropic forms of the yttrium and heavy lanthanide sulfides. Chemical analysis techniques are also described because it is strongly recommended that samples prepared by melting should have their chemical compositions verified because of chalcogen losses in the melting step.

  11. Replacing the Rare Earth Intellectual Capital

    SciTech Connect

    Gschneidner, Jr., Karl

    2011-04-01

    The rare earth crisis slowly evolved during a 10 to 15 year period beginning in the mid-1980s, when the Chinese began to export mixed rare earth concentrates. In the early 1990s, they started to move up the supply chain and began to export the individual rare earth oxides and metals. By the late 1990s the Chinese exported higher value products, such as magnets, phosphors, polishing compounds, catalysts; and in the 21st century they supplied finished products including electric motors, computers, batteries, liquid-crystal displays (LCDs), TVs and monitors, mobile phones, iPods and compact fluorescent lamp (CFL) light bulbs. As they moved to higher value products, the Chinese slowly drove the various industrial producers and commercial enterprises in the US, Europe and Japan out of business by manipulating the rare earth commodity prices. Because of this, the technically trained rare earth engineers and scientists who worked in areas from mining to separations, to processing to production, to manufacturing of semifinished and final products, were laid-off and moved to other fields or they retired. However, in the past year the Chinese have changed their philosophy of the 1970s and 1980s of forming a rare earth cartel to control the rare earth markets to one in which they will no longer supply the rest of the world (ROW) with their precious rare earths, but instead will use them internally to meet the growing demand as the Chinese standard of living increases. To this end, they have implemented and occasionally increased export restrictions and added an export tariff on many of the high demand rare earth elements. Now the ROW is quickly trying to start up rare earth mines, e.g. Molycorp Minerals in the US and Lynas Corp. in Australia, to cover this shortfall in the worldwide market, but it will take about five years for the supply to meet the demand, even as other mines in the ROW become productive. Unfortunately, today there is a serious lack of technically trained

  12. What about the rare-earth elements

    Technology Transfer Automated Retrieval System (TEKTRAN)

    There is insufficient understanding of the nutritional physiology of pecan trees and orchards; thus, affecting nutmeat yield and quality, disease resistance and alternate bearing. An analysis of the rare-earth element composition of pecan and related hickory cousins found that they hyperaccumulate ...

  13. Rare earths in nanocrystalline glass ceramics

    NASA Astrophysics Data System (ADS)

    Lahoz, F.; Martín, I. R.; Rodríguez-Mendoza, U. R.; Iparraguirre, I.; Azkargorta, J.; Mendioroz, A.; Balda, R.; Fernández, J.; Lavín, V.

    2005-10-01

    The optical spectroscopic analysis of rare earth ions in transparent oxyfluoride glass-ceramics obtained from SiO2-Al2O3-PbF2-CdF2 based precursor glasses is presented. The oscillator strengths of the optical transitions were measured from the absorption spectra of glasses and glass-ceramics doped with rare earth ions. The results were analysed in the framework of the Judd-Ofelt theory giving the values of the three Ω2, Ω4 and Ω6 intensity parameters over the rare earth series. On the other hand, high efficient infrared-to-blue upconversion has been observed in Tm3+-Yb3+ codoped glass and glass-ceramic compared to the Tm3+ single doped matrices. The contributions to the upconversion process of the rare earth ions in the nanocrystalline and in the vitreous phase of the glass-ceramics have been distinguished. Finally, laser action in Nd3+-doped glass-ceramic has been studied. Losses due to UV and visible upconverted emissions inside the laser cavity have been also estimated.

  14. Crystalline rare-earth activated oxyorthosilicate phosphor

    DOEpatents

    McClellan, Kenneth J.; Cooke, D. Wayne

    2004-02-10

    Crystalline, transparent, rare-earth activated lutetium oxyorthosilicate phosphor. The phosphor consists essentially of lutetium yttrium oxyorthosilicate activated with a rare-earth metal dopant M and having the general formula Lu(.sub.2-x-z)Y.sub.x M.sub.z SiO.sub.5, wherein 0.00.ltoreq.x.ltoreq.1.95, wherein 0.001.ltoreq.z.ltoreq.0.02, and wherein M is selected from Sm, Tb, Tm, Eu, Yb, and Pr. The phosphor also consists essentially of lutetium gadolinium oxyorthosilicate activated with a rare-earth metal dopant M and having the general formula Lu(.sub.2-x-z)Gd.sub.x M.sub.z SiO.sub.5, wherein 0.00.ltoreq.x.ltoreq.1.95, wherein 0.001.ltoreq.z.ltoreq.0.02, and wherein M is selected from Sm, Tb, Tm, Eu, Yb, and Pr. The phosphor also consists essentially of gadolinium yttrium oxyorthosilicate activated with a rare-earth metal dopant M and having the general formula Gd(.sub.2-x-z)Y.sub.x M.sub.z SiO.sub.5, wherein 0.00.ltoreq.x.ltoreq.1.95, wherein 0.001.ltoreq.z.ltoreq.0.02, and wherein M is selected from Sm, Tb, Tm, Eu, Yb, and Pr. The phosphor may be optically coupled to a photodetector to provide a radiation detector.

  15. Rare-earth pneumoconiosis: a new case

    SciTech Connect

    Sulotto, F.; Romano, C.; Berra, A.; Botta, G.C.; Rubino, G.F.; Sabbioni, E.; Pietra, R.

    1986-01-01

    A new case of rare-earth (RE) pneumoconiosis is described. The subject had worked as a photoengraver for 13 years and had not been exposed for 17 years. Chest X-ray showed a diffuse nodular pattern (q 2/3-ILO/1980). The patient was asymptomatic despite a restrictive spirometric impairment. The diagnosis derived from the finding, in the bronchoalveolar lavage fluid, of abnormal levels of La, Ce, Nd, Sm, Tb, Yb, and Lu. The presence of these elements was demonstrated by two methods: the neutron activation analysis and (as regards Ce alone) the X-ray energy spectrometry of mineral particles observed with electron microscope. Abnormal levels of rare earths were demonstrated also in the nails, suggesting an absorption of the RE from the lung.

  16. Structural properties of rare earth chalcogenides

    NASA Astrophysics Data System (ADS)

    Bhardwaj, Ramakant; Bhardwaj, Purvee; Singh, Sadhna

    2016-05-01

    The pressure induced NaCl (B1) to CsCl (B2) structural phase transition of rare earth mono-chalcogenide (PuTe) has been investigated in this paper. A modified interaction potential model (MIPM) (including the covalency effect) has been developed. Phase transition pressures are associated with a sudden collapse in volume. The phase transition pressures and associated volume collapses obtained from present potential model show a generally good agreement with available experimental data than others.

  17. Rare earth element systematics in hydrothermal fluids

    SciTech Connect

    Michard, A. )

    1989-03-01

    Rare earth element concentrations have been measured in hydrothermal solutions from geothermal fields in Italy, Dominica, Valles Caldera, Salton Sea and the Mid-Atlantic Ridge. The measured abundances show that hydrothermal activity is not expected to affect the REE balance of either continental or oceanic rocks. The REE enrichment of the solutions increases when the pH decreases. High-temperature solutions (> 230{degree}C) percolating through different rock types may show similar REE patterns.

  18. SEPARATION OF RARE EARTHS BY SOLVENT EXTRACTION

    DOEpatents

    Peppard, D.F.; Mason, G.W.

    1960-10-11

    A process is given for separating lanthanide rare earths from each other from an aqueous mineral acid solution, e.g., hydrochloric or nitric acid of a concentration of above 3 M, preferably 12 to 16 M, by extraction with a water- immiscible alkyl phosphate, such as tributyl phosphate or a mixture of mono-, di- and tributyl phosphate, and fractional back-extraction with mineral acid whereby the lanthanides are taken up by the acid in the order of increasing atomic number.

  19. Electronic structure of rare-earth hexaborides

    NASA Astrophysics Data System (ADS)

    Kimura, S.; Nanba, T.; Tomikawa, M.; Kunii, S.; Kasuya, T.

    1992-11-01

    Reflectivity spectra of all rare-earth hexaboride RB6 (R=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Yb, and Y) single crystals have been measured systematically in the energy region from 1 meV to 40 eV at 300 K in order to investigate the electronic state and the contribution of the 4f electron to the band structure. The analysis of the optical conductivity and the loss-function spectra, which were derived from the Kramers-Kronig transformation of the reflectivity spectra, allowed us to make clear the origin of the peak structure in the spectrum due to the various interband transitions. The origins of the main peaks in the spectrum were assigned to the interband transitions from the bonding to the antibonding bands of the boron 2s and 2p states and to the rare-earth 5d state. The intra-atomic transition from the 4f and the 5p to the 5d(t2g) states in the rare-earth ion was also observed.

  20. Recycling of rare earth metals from rare earth-transition metal alloy scrap by liquid metal extraction

    DOEpatents

    Ellis, T.W.; Schmidt, F.A.

    1995-08-01

    A method is described for treating rare earth metal-bearing scrap, waste or other material (e.g. Nd--Fe--B or Dy--Tb--Fe scrap) to recover the rare earth metal comprising melting the rare earth metal-bearing material, melting a Group IIA metal extractant, such as Mg, Ca, or Ba, in which the rare earth is soluble in the molten state, and contacting the melted material and melted extractant at a temperature and for a time effective to extract the rare earth from the melted material into the melted extractant. The rare earth metal is separated from the extractant metal by vacuum sublimation or distillation. 2 figs.

  1. Recycling of rare earth metals from rare earth-transition metal alloy scrap by liquid metal extraction

    DOEpatents

    Ellis, Timothy W.; Schmidt, Frederick A.

    1995-08-01

    Method of treating rare earth metal-bearing scrap, waste or other material (e.g. Nd--Fe--B or Dy--Tb--Fe scrap) to recover the rare earth metal comprising melting the rare earth metal-bearing material, melting a Group IIA metal extractant, such as Mg, Ca, or Ba, in which the rare earth is soluble in the molten state, and contacting the melted material and melted extractant at a temperature and for a time effective to extract the rare earth from the melted material into the melted extractant. The rare earth metal is separated from the extractant metal by vacuum sublimation or distillation.

  2. Anthropogenic Cycles of Rare Earth Elements

    NASA Astrophysics Data System (ADS)

    Du, X.; Graedel, T. E.

    2009-12-01

    This research will develop quantitatively resolved anthropogenic cycles and in-use stocks for the rare earth metals specifically cerium, lanthanum and dysprosium in Japan, China, and the U.S. for the year of 2007. Rare earth elements (REE) is a group of 17 scare metals widely used in a growing number of emerging technologies and have been in high demand for emerging technologies as raw materials during past the three decades. New market participants from newly industrializing countries, primarily China, have had strong impacts on the demand of share. Consequently, the importance to sustain a reliable, steady, uninterrupted supply on global market triggered comprehensive research to recognize and understand the life cycles of rare earths. Moreover, because China plays a dominant role in mining production since 1990, it requires the assessment for the countries, which are almost completely dependent on imports from China with respect to rare earth resources. The study aims to analyze the flows and stocks of rare earth elements individually as elemental form in spite of their natural geological co-occurrence and mixed composition in applications. By applying the method of Material Flow Analysis (MFA) work has been done on evaluating current and historical flows of specific technologically significant materials, for example, copper, zinc, nickel, etc., determining the stocks available in different types of reservoirs (e.g., lithosphere, in-use) and the flows among the reservoirs, developing scenarios of possible futures of metal use, and assessing the environmental and policy implications of the results. Therefore, REE as a new target deserves inclusion because of its potential demand-supply conflict and importance to secure the competitive advantage of technical innovation in future. This work will generate a quantitatively resolved anthropogenic life cycle and in-use stocks for REE for the main target countries for a chosen year, 2007, providing flows and stocks from

  3. Rare earth deposits in a deceased movie projectionist. A new case of rare earth pneumoconiosis?

    PubMed

    Waring, P M; Watling, R J

    The subject described in this case report, a movie projectionist, had approximately 25 years of occupational exposure to carbon arc lamp fumes. The carbon arc deposits were visible in histological sections as small granules within macrophages of the tracheobronchial lymph nodes and hepatic Kupffer's cells. Electron microprobe analysis by energy dispersive analysis of x-rays showed the granules to be composed of the rare earth elements cerium, lanthanum and neodymium, which are the major constituents of carbon arc rods. Tissue concentrations, as determined by inductively coupled plasma spectroscopy, were approximately 250-2000 times those of unexposed controls, and there was evidence of their redistribution throughout the reticuloendothelial system. There were no respiratory symptoms, or radiographic or histological pulmonary changes attributable to the progressive accumulation of the rare earth elements, and as such the patient cannot be considered to have suffered from pneumoconiosis. Twenty-one published cases of rare earth pneumoconiosis, mainly in photoengravers exposed to carbon arc fumes, are reviewed and suggest that rare earth oxides are not innocuous dusts. With the increasingly widespread use of rare earth elements there is a likelhood that further occupational groups may have significant but unrecognised exposure. PMID:2247001

  4. 40 CFR 721.6005 - Rare earth phosphate (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Rare earth phosphate (generic). 721... Substances § 721.6005 Rare earth phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as rare earth phophate (PMNs...

  5. 40 CFR 721.6005 - Rare earth phosphate (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Rare earth phosphate (generic). 721... Substances § 721.6005 Rare earth phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as rare earth phophate (PMNs...

  6. 40 CFR 721.6005 - Rare earth phosphate (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Rare earth phosphate (generic). 721... Substances § 721.6005 Rare earth phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as rare earth phophate (PMNs...

  7. 40 CFR 721.6005 - Rare earth phosphate (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Rare earth phosphate (generic). 721... Substances § 721.6005 Rare earth phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as rare earth phophate (PMNs...

  8. 40 CFR 721.6005 - Rare earth phosphate (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Rare earth phosphate (generic). 721... Substances § 721.6005 Rare earth phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as rare earth phophate (PMNs...

  9. Rare earth elements materials production from apatite ores

    NASA Astrophysics Data System (ADS)

    Anufrieva, A. V.; Andrienko, O. S.; Buynovskiy, A. S.; Makaseev, Y. N.; Mazov, I. N.; Nefedov, R. A.; Sachkov, V. I.; Stepanova, O. B.; Valkov, A. V.

    2016-01-01

    The paper deals with the study of processing apatite ores with nitric acid and extraction of the rare earth elements. The rare earth elements can be successfully separated and recovered by extraction from the nitrate- phosphate solution, being an tributyl phosphate as extraction agent. The developed scheme of the processing apatite concentrate provides obtaining rare earth concentrates with high qualitative characteristics.

  10. Raman investigations of rare earth orthovanadates

    NASA Astrophysics Data System (ADS)

    Santos, C. C.; Silva, E. N.; Ayala, A. P.; Guedes, I.; Pizani, P. S.; Loong, C.-K.; Boatner, L. A.

    2007-03-01

    Polarized Raman spectroscopy has been used to obtain the room-temperature phonon spectra of the series of rare earth orthovanadate single crystals: SmVO4, HoVO4, YbVO4, and LuVO4. The observed Raman frequencies follow the overall mode distribution expected for REVO4 compounds with the tetragonal zircon structure. The variation of the mode frequency with atomic number across the lanthanide orthovanadate series was investigated, and the trend exhibited by the internal modes was explained by considering the force constants of VO4 tetrahedron.

  11. Raman Investigations of Rare-Earth Orthovanadates

    SciTech Connect

    Santos, C. C.; Silva, E. N.; Ayala, A. P.; Guedes, I.; Pizani, P. S.; Loong, C. K.; Boatner, Lynn A

    2007-01-01

    Polarized Raman spectroscopy has been used to obtain the room-temperature phonon spectra of the series of rare earth orthovanadate single crystals: SmVO4, HoVO4, YbVO4 and LuVO4. The observed Raman frequencies follow the overall mode distribution expected for RVO4 compounds with the tetragonal zircon structure. The variation of the mode frequency with atomic number across the lanthanide orthovanadate series was investigated, and the trend exhibited by the internal modes was explained by considering the force constants of VO4 tetrahedron.

  12. Rare-earth-metal dialkynyl dimethyl aluminates.

    PubMed

    Nieland, Anja; Mix, Andreas; Neumann, Beate; Stammler, Hans-Georg; Mitzel, Norbert W

    2013-06-17

    A new class of rare-earth-metal alkynyl complexes has been prepared. The reactions of the tris(tetramethylaluminate)s of lanthanum, praseodymium, samarium, yttrium, holmium, and thulium, [Ln(AlMe₄)₃], with phenylacetylene afforded compounds [Ln{(μ-C≡CPh)₂AlMe₂}₃] (Ln=La (1), Pr (2), Sm (3), Y (4), Ho (5), Tm (6)). All of these compounds have been characterized by NMR spectroscopy, X-ray crystallography, and by elemental analysis. NMR spectroscopic studies of the series of para- magnetic compounds [Ln(AlMe₄)₃] and [Ln{(μ-C≡CPh)₂AlMe₂}₃] have also been performed. PMID:23616205

  13. Rare-Earth-Free Traction Motor: Rare Earth-Free Traction Motor for Electric Vehicle Applications

    SciTech Connect

    2012-01-01

    REACT Project: Baldor will develop a new type of traction motor with the potential to efficiently power future generations of EVs. Unlike today’s large, bulky EV motors which use expensive, imported rare-earth-based magnets, Baldor’s motor could be light, compact, contain no rare earth materials, and have the potential to deliver more torque at a substantially lower cost. Key innovations in this project include the use of a unique motor design, incorporation of an improved cooling system, and the development of advanced materials manufacturing techniques. These innovations could significantly reduce the cost of an electric motor.

  14. Characterization of a rare earth oxide obtained from xenotime mineral

    SciTech Connect

    Vernilli, Fernando . E-mail: fernando.vernilli@demar.faenquil.br; Camargo Vernilli, Daniela; Ferreira, Bento; Silva, Gilbert

    2007-01-15

    This paper reports on the characterization of a rare earth oxide obtained by hydrometallurgy of the mineral xenotime, an yttrium phosphate containing other rare earths, and comparison with mixtures of rare earth oxides prepared in different ways. The results indicated that hydrometallurgy from xenotime yielded a solid solution of the rare earth oxides. However, when the pure rare earth oxides were simply mixed physically then heat-treated at 1000 deg. C, a similar solid solution was not obtained. On the other hand, when the mixtures were prepared using a co-precipitation process, subsequent heat treatment did produce oxide solid solutions similar to that produced by hydrometallurgy of xenotime.

  15. Note: Portable rare-earth element analyzer using pyroelectric crystal.

    PubMed

    Imashuku, Susumu; Fuyuno, Naoto; Hanasaki, Kohei; Kawai, Jun

    2013-12-01

    We report a portable rare-earth element analyzer with a palm-top size chamber including the electron source of a pyroelectric crystal and the sample stage utilizing cathodoluminescence (CL) phenomenon. The portable rare-earth element analyzer utilizing CL phenomenon is the smallest reported so far. The portable rare-earth element analyzer detected the rare-earth elements Dy, Tb, Er, and Sm of ppm order in zircon, which were not detected by scanning electron microscopy-energy dispersive X-ray spectroscopy analysis. We also performed an elemental mapping of rare-earth elements by capturing a CL image using CCD camera. PMID:24387481

  16. Note: Portable rare-earth element analyzer using pyroelectric crystal

    SciTech Connect

    Imashuku, Susumu Fuyuno, Naoto; Hanasaki, Kohei; Kawai, Jun

    2013-12-15

    We report a portable rare-earth element analyzer with a palm-top size chamber including the electron source of a pyroelectric crystal and the sample stage utilizing cathodoluminescence (CL) phenomenon. The portable rare-earth element analyzer utilizing CL phenomenon is the smallest reported so far. The portable rare-earth element analyzer detected the rare-earth elements Dy, Tb, Er, and Sm of ppm order in zircon, which were not detected by scanning electron microscopy-energy dispersive X-ray spectroscopy analysis. We also performed an elemental mapping of rare-earth elements by capturing a CL image using CCD camera.

  17. Reflectives: Phosphors and lasers - shedding light on rare earths

    SciTech Connect

    Tonneson, L.C.; Fox, G.J.

    1996-04-01

    The first powder electroluminescent phosphor was introduced in 1936. Today, phosphors, particularly those made of high-purity rare earths, have found their way into a variety of products: industrial, commercial, and consumer, alike. The fluorescent lamp industry which remains the leading market for the use of high-purity rare earths, lit the way for the future of rare earths in the optical, x-ray, and display screen applications. Light combined with rare earth materials is also a successful recipe for reflectivity needed in filtering applications such as optics, lasers, and conductors. This article discusses the applications and markets for phosphors and rare earths.

  18. CADMIUM-RARE EARTH BORATE GLASS AS REACTOR CONTROL MATERIAL

    DOEpatents

    Ploetz, G.L.; Ray, W.E.

    1958-11-01

    A reactor control rod fabricated from a cadmiumrare earth-borate glass is presented. The rare earth component of this glass is selected from among those rare earths having large neutron capture cross sections, such as samarium, gadolinium or europium. Partlcles of this glass are then dispersed in a metal matrix by standard powder metallurgy techniques.

  19. BOREHOLE NEUTRON ACTIVATION: THE RARE EARTHS.

    USGS Publications Warehouse

    Mikesell, J.L.; Senftle, F.E.

    1987-01-01

    Neutron-induced borehole gamma-ray spectroscopy has been widely used as a geophysical exploration technique by the petroleum industry, but its use for mineral exploration is not as common. Nuclear methods can be applied to mineral exploration, for determining stratigraphy and bed correlations, for mapping ore deposits, and for studying mineral concentration gradients. High-resolution detectors are essential for mineral exploration, and by using them an analysis of the major element concentrations in a borehole can usually be made. A number of economically important elements can be detected at typical ore-grade concentrations using this method. Because of the application of the rare-earth elements to high-temperature superconductors, these elements are examined in detail as an example of how nuclear techniques can be applied to mineral exploration.

  20. Rare-earth abundances in chondritic meteorites

    NASA Technical Reports Server (NTRS)

    Evensen, N. M.; Hamilton, P. J.; Onions, R. K.

    1978-01-01

    Fifteen chondrites, including eight carbonaceous chondrites, were analyzed for rare earth element abundances by isotope dilution. Examination of REE for a large number of individual chondrites shows that only a small proportion of the analyses have flat unfractionated REE patterns within experimental error. While some of the remaining analyses are consistent with magmatic fractionation, many patterns, in particular those with positive Ce anomalies, can not be explained by known magmatic processes. Elemental abundance anomalies are found in all major chondrite classes. The persistence of anomalies in chondritic materials relatively removed from direct condensational processes implies that anomalous components are resistant to equilibrium or were introduced at a late stage of chondrite formation. Large-scale segregation of gas and condensate is implied, and bulk variations in REE abundances between planetary bodies is possible.

  1. Rare earth doped zinc oxide varistors

    DOEpatents

    McMillan, April D.; Modine, Frank A.; Lauf, Robert J.; Alim, Mohammad A.; Mahan, Gerald D.; Bartkowiak, Miroslaw

    1998-01-01

    A varistor includes a Bi-free, essentially homogeneous sintered body of a ceramic composition including, expressed as nominal weight %, 0.2-4.0% oxide of at least one rare earth element, 0.5-4.0% Co.sub.3 O.sub.4, 0.05-0.4% K.sub.2 O, 0.05-0.2% Cr.sub.2 O.sub.3, 0-0.2% CaO, 0.00005-0.01% Al.sub.2 O.sub.3, 0-2% MnO, 0-0.05% MgO, 0-0.5% TiO.sub.3, 0-0.2% SnO.sub.2, 0-0.02% B.sub.2 O.sub.3, balance ZnO.

  2. Rare earth doped zinc oxide varistors

    DOEpatents

    McMillan, A.D.; Modine, F.A.; Lauf, R.J.; Alim, M.A.; Mahan, G.D.; Bartkowiak, M.

    1998-12-29

    A varistor includes a Bi-free, essentially homogeneous sintered body of a ceramic composition including, expressed as nominal weight %, 0.2--4.0% oxide of at least one rare earth element, 0.5--4.0% Co{sub 3}O{sub 4}, 0.05--0.4% K{sub 2}O, 0.05--0.2% Cr{sub 2}O{sub 3}, 0--0.2% CaO, 0.00005--0.01% Al{sub 2}O{sub 3}, 0--2% MnO, 0--0.05% MgO, 0--0.5% TiO{sub 3}, 0--0.2% SnO{sub 2}, 0--0.02% B{sub 2}O{sub 3}, balance ZnO. 4 figs.

  3. Rare Earth-Bearing Murataite Ceramics

    SciTech Connect

    Stefanovsky, Sergey; Stefanovsky, Olga; Yudintsev, Sergey; Nikonov, Boris

    2007-07-01

    Phase composition of the murataite-based ceramics containing 10 wt.% lanthanum, cerium, neodymium, europium, gadolinium, yttrium, zirconium oxides was studied. The ceramics were prepared by melting of oxide mixtures in 20 mL glass-carbon crucibles in air at {approx}1500 deg. C. They are composed of predominant murataite-type phases and minor extra phases: rutile, crichtonite, perovskite, ilmenite/pyrophanite, and zirconolite (in the Zr-bearing sample only). Three murataite-related phases with five- (5C), eight- (8C), and three-fold (3C) elementary fluorite unit cell are normally present in all the ceramics. These phases form core, intermediate zone, and rim of the murataite grains, respectively. They are predominant host phases for the rare earth elements whose concentrations are reduced in a row: 5C>8C>3C. Appreciate fraction of La and Ce may enter the perovskite phase. (authors)

  4. Rare earth elements in river waters

    NASA Technical Reports Server (NTRS)

    Goldstein, Steven J.; Jacobsen, Stein B.

    1988-01-01

    To characterize the input to the oceans of rare earth elements (REE) in the dissolved and the suspended loads of rivers, the REE concentrations were measured in samples of Amazon, Indus, Mississippi, Murray-Darling, and Ohio rivers and in samples of smaller rivers that had more distinct drainage basin lithology and water chemistry. It was found that, in the suspended loads of small rivers, the REE pattern was dependent on drainage basin geology, whereas the suspended loads in major rivers had relatively uniform REE patterns and were heavy-REE depleted relative to the North American Shale composite (NASC). The dissolved loads in the five major rivers had marked relative heavy-REE enrichments, relative to the NASC and the suspended material, with the (La/Yb)N ratio of about 0.4 (as compared with the ratio of about 1.9 in suspended loads).

  5. Gaining control over rare earth valence fluctuations

    SciTech Connect

    Wohlleben, D.

    1987-05-31

    This paper briefly deals with the problem of narrow band materials. It addresses a new theoretical approach to the fluctuation of valence electrons in rare earth elements. It is believed that the phenomena of interest arize from an instability of the partially filled d or f shell of certain atoms when they are put into a metallic host. The theoretical models which dominate the scene work with two local d or f states on one hand and a structureless sea of free conduction electrons on the other. This procedure ignores at least half of the essential physics; the other held is kept alive in the term valence fluctuation. Basically, what the prevalent models ignore is that, in all these systems, the entire atoms as the source of the anomalies are being dealt with, not just their f shells. In other words, there is important structure in the sea of conduction electrons.

  6. Enhanced pinning in mixed rare earth-123 films

    SciTech Connect

    Driscoll, Judith L.; Foltyn, Stephen R.

    2009-06-16

    An superconductive article and method of forming such an article is disclosed, the article including a substrate and a layer of a rare earth barium cuprate film upon the substrate, the rare earth barium cuprate film including two or more rare earth metals capable of yielding a superconductive composition where ion size variance between the two or more rare earth metals is characterized as greater than zero and less than about 10.times.10.sup.-4, and the rare earth barium cuprate film including two or more rare earth metals is further characterized as having an enhanced critical current density in comparison to a standard YBa.sub.2Cu.sub.3O.sub.y composition under identical testing conditions.

  7. SALICYLATE PROCESS FOR THORIUM SEPARATION FROM RARE EARTHS

    DOEpatents

    Cowan, G.A.

    1959-08-25

    The separation of thorium from rare earths is accomplished by forming an aqueous solution of salts of thorium and rare earths and sufficient acetate buffer to provide a pH of between 2 and 5, adding an ammonium salicylate to the aqueous buffered solution, contacting the resultant solution with a substantially water-immiscible organic solvent mixture of an ether and an ester, and separating the solvent extract phase containing thorium salicylate from the aqueous phase containing the rare earths.

  8. Mechanism of Rare Earth Incorporation and Crystal Growth of Rare Earth Containing Type-I Clathrates

    PubMed Central

    2015-01-01

    Type-I clathrates possess extremely low thermal conductivities, a property that makes them promising materials for thermoelectric applications. The incorporation of cerium into one such clathrate has recently been shown to lead to a drastic enhancement of the thermopower, another property determining the thermoelectric efficiency. Here we explore the mechanism of the incorporation of rare earth elements into type-I clathrates. Our investigation of the crystal growth and the composition of the phase Ba8–xRExTMySi46–y (RE = rare earth element; TM = Au, Pd, Pt) reveals that the RE content x is mainly governed by two factors, the free cage space and the electron balance. PMID:26823658

  9. The Rare Earth Magnet Industry and Rare Earth Price in China

    NASA Astrophysics Data System (ADS)

    Ding, Kaihong

    2014-07-01

    In the past four years, the price of rare earth metal fluctuates sharply for many reasons. Currently, it has become more stable and more reasonable. This presentation is focused on the effect about the rare earth metal price. Some motor manufacturers have shifted from rare earth permanent magnet to ferrite magnet. Many motor manufacturers changed the design for the motor cooling system to make the motor function at a lower temperature. Thus the consumption of Dy can be markedly reduced. As for manufacturer of NdFeB magnet, we are also trying to optimize our process to reduce to dependence of HREE such as Dy and Tb. HS process have been introduced to solve the problem. With more and more people focusing and engaging on the REE industry, the price of REE will be more transparent without too many fluctuations. China is considering the problems of balancing the environment, energy sources, and labor sources. The application field about NdFeB such as wind turbine generator, HEV/EV, FA /OA is flourishing.

  10. Improved Rare-Earth Emitter Hollow Cathode

    NASA Technical Reports Server (NTRS)

    Goebel, Dan M.

    2011-01-01

    An improvement has been made to the design of the hollow cathode geometry that was created for the rare-earth electron emitter described in Compact Rare Earth Emitter Hollow Cathode (NPO-44923), NASA Tech Briefs, Vol. 34, No. 3 (March 2010), p. 52. The original interior assembly was made entirely of graphite in order to be compatible with the LaB6 material, which cannot be touched by metals during operation due to boron diffusion causing embrittlement issues in high-temperature refractory materials. Also, the graphite tube was difficult to machine and was subject to vibration-induced fracturing. This innovation replaces the graphite tube with one made out of refractory metal that is relatively easy to manufacture. The cathode support tube is made of molybdenum or molybdenum-rhenium. This material is easily gun-bored to near the tolerances required, and finish machined with steps at each end that capture the orifice plate and the mounting flange. This provides the manufacturability and robustness needed for flight applications, and eliminates the need for expensive e-beam welding used in prior cathodes. The LaB6 insert is protected from direct contact with the refractory metal tube by thin, graphite sleeves in a cup-arrangement around the ends of the insert. The sleeves, insert, and orifice plate are held in place by a ceramic spacer and tungsten spring inserted inside the tube. To heat the cathode, an insulating tube is slipped around the refractory metal hollow tube, which can be made of high-temperature materials like boron nitride or aluminum nitride. A screw-shaped slot, or series of slots, is machined in the outside of the ceramic tube to constrain a refractory metal wire wound inside the slot that is used as the heater. The screw slot can hold a single heater wire that is then connected to the front of the cathode tube by tack-welding to complete the electrical circuit, or it can be a double slot that takes a bifilar wound heater with both leads coming out

  11. Correlated topological phase in rare earth Hexaboride

    NASA Astrophysics Data System (ADS)

    Xu, Nan; Shi, X.; Biswas, P.; Matt, C.; Dhaka, R.; Huang, Y.; Plumb, N.; Radovic, M.; Dil, J.; Pomjakushina, E.; Conder, K.; Amato, A.; Salman, Z.; Paul, D.; Mesot, J.; Ding, Hong; Shi, Ming

    2014-03-01

    We have performed an angle-resolved photoemission spectroscopy study on SmB6 in order to elucidate elements of the electronic structure relevant to the possible occurrence of a topological Kondo insulator state. Our results reveal one electron-like 5d bulk band centered at the X point of the bulk Brillouin zone that is hybridized with strongly correlated f electrons, as well as the opening of a Kondo band gap (~20 meV) at low temperature. In addition, we observe electron-like bands forming three Fermi surfaces at the center Gamma-bar point and boundary X-bar point of the surface Brillouin zone. These bands are not expected from calculations of the bulk electronic structure, and their observed dispersion characteristics are consistent with surface states. Our results suggest that the unusual low-temperature transport behavior of SmB6 is likely to be related to the pronounced surface states sitting inside the band hybridization gap and the presence of a topological Kondo insulating state. Recent result on rare earth Hexboride will be shown. This work was supported by the Sino-Swiss Science and Technology Cooperation (Project No. IZLCZ2138954), the Swiss National Science Foundation (Grant No. 200021-137783), and MOST (Grant No. 2010CB923000) and NSFC.

  12. Novel rare earth boron-rich solids

    SciTech Connect

    Zhang, Fuxiang; Leithe-Jasper, Andreas; Xu, Jun; Mori, Takao; Matsui, Yoshio, Tanaka, Takaho; Okada, Shigeru

    2001-06-01

    A new series of boron-rich solids ReB{sub 22}C{sub 2}N (Re: Y, Ho, Er, Tm, Lu) was synthesized by traditional solid-state reaction. The crystal structure of the representative compound YB{sub 22}C{sub 2}N was solved by direct method from powder X-ray diffraction (XRD) data and transmission electron microscope (TEM) analysis. The unit cell of the new structure is rhombohedral with space group R-3m (No. 166), lattice constant a = b = 5.623(0) {angstrom} and c = 44.785(3) {angstrom} with six formula units in one unit cell. The atoms of boron in the solids, like most of the boron-rich solids, exist with icosahedral and octahedral clusters, and the whole crystal shows a layered structure. The interconnected nine layers of icosahedron and three layers of octahedron in a unit cell build the whole framework of the new phase and rare earth metal atoms reside in voids of the octahedron layers. The neighboring icosahedral layers link through C-B-C chains besides the direct bonding of B-B. Both experimental and structural analysis indicated that the nitrogen atoms in the new phase can be replaced with carbon.

  13. Development of a Rare Earth Element Paleoproxy

    NASA Astrophysics Data System (ADS)

    Haley, B. A.; Klinkhammer, G. P.; McManus, J.

    2002-12-01

    The rare earth elements (REEs) have demonstrated considerable potential as paleoproxies for changes in seawater chemistry. However, their utilization in paleoceanographic investigations has been mainly limited to neodymium isotopic analyses in metalliferous deposits and fossil apatite. The goal of being able to use the entire group of elements in foraminiferal shells has proven difficult. The problem with analysis of these elements in this matrix stems mainly from: (1) the ability to clean the shells of diagenetic aberrations and (2) the paucity of REE data in the environment where forams obtain their primary signature. We recently measured pore water profiles of REEs using an interfaced Ion Chromatograph (IC) and Inductively Coupled Plasma Mass Spectrometer (ICP-MS) in a depth transect off the Coast of California, and a profile from off the Peru-Chile margin. The pore water results are surprising and will alter our view of REE marine geochemistry. For example, they call into question the traditional method of calculating a "Ce-anomaly." The profiles also show dramatic changes in REE concentrations and patterns with depth, and demonstrate that the REE signature preserved in epifaunal benthic versus infaunal foram species and diagenetically added phases should be easily identifiable. Preliminary REE results from forams cleaned via a recently developed flow-through technique will be shown and compared to matching pore water data. We will conclude by outlining the potential of foraminiferal REE content for paleoceanography that ranges from water mass tracer to proxies for organic carbon flux and oxygen concentration.

  14. Replacing critical rare earth materials in high energy density magnets

    NASA Astrophysics Data System (ADS)

    McCallum, R. William

    2012-02-01

    High energy density permanent magnets are crucial to the design of internal permanent magnet motors (IPM) for hybride and electric vehicles and direct drive wind generators. Current motor designs use rare earth permanent magnets which easily meet the performance goals, however, the rising concerns over cost and foreign control of the current supply of rare earth resources has motivated a search for non-rare earth based permanent magnets alloys with performance metrics which allow the design of permanent magnet motors and generators without rare earth magnets. This talk will discuss the state of non-rare-earth permanent magnets and efforts to both improve the current materials and find new materials. These efforts combine first principles calculations and meso-scale magnetic modeling with advance characterization and synthesis techniques in order to advance the state of the art in non rare earth permanent magnets. The use of genetic algorithms in first principle structural calculations, combinatorial synthesis in the experimental search for materials, atom probe microscopy to characterize grain boundaries on the atomic level, and other state of the art techniques will be discussed. In addition the possibility of replacing critical rare earth elements with the most abundant rare earth Ce will be discussed.

  15. Tunable, rare earth-doped solid state lasers

    DOEpatents

    Emmett, John L.; Jacobs, Ralph R.; Krupke, William F.; Weber, Marvin J.

    1980-01-01

    Laser apparatus comprising combinations of an excimer pump laser and a rare earth-doped solid matrix, utilizing the 5d-4f radiative transition in a rare earth ion to produce visible and ultra-violet laser radiation with high overall efficiency in selected cases and relatively long radiative lifetimes.

  16. Rare-earth occurrences in the Pea Ridge tailings

    SciTech Connect

    Vierrether, C.W.; Cornell, W.I.

    1993-01-01

    Tailings from the Pea Ridge iron mine contain significant amounts of apatite, which has rare-earth element values associated with it. In association with the recovery of rare-earth minerals as a secondary resource, the US Bureau of Mines conducted an investigation on the recoverability of the rare-earth minerals from the tailings. The mill tailings were subjected to a phosphate flotation to separate the apatite from other constituents. More than 70-pct recovery of the rare-earth values was achieved. Based on mineralogical characterization and prior analysis of rare-earth-bearing breccia pipe material at Pea Ridge, it is proposed that processing this phosphate concentrate on a vanner table would yield up to a 95-pct recovery of the rare earths in the concentrate, with the apatite reporting to the tailings. Intensive ore microscopy studies of the original tailings to the flotation products led to the identification of monazite, xenotime, and rare-earth-enriched apatite as the major rare-earth-bearing minerals in the tailings.

  17. Google Earth locations of USA and seafloor hydrothermal vents with associated rare earth element data

    DOE Data Explorer

    Andrew Fowler

    2016-02-10

    Google Earth .kmz files that contain the locations of geothermal wells and thermal springs in the USA, and seafloor hydrothermal vents that have associated rare earth element data. The file does not contain the actual data, the actual data is available through the GDR website in two tier 3 data sets entitled "Compilation of Rare Earth Element Analyses from US Geothermal Fields and Mid Ocean Ridge (MOR) Hydrothermal Vents" and "Rare earth element content of thermal fluids from Surprise Valley, California"

  18. PROCESS FOR SEPARATING AMERICIUM AND CURIUM FROM RARE EARTH ELEMENTS

    DOEpatents

    Baybarz, R.D.; Lloyd, M.H.

    1963-02-26

    This invention relates to methods of separating americium and curium values from rare earth values. In accordance with the invention americium, curium, and rare earth values are sorbed on an anion exchange resin. A major portion of the rare earth values are selectively stripped from the resin with a concentrated aqueous solution of lithium chloride, and americium, curium, and a minor portion of rare earth values are then stripped from the resin with a dilute aqueous solution of lithium chloride. The americium and curium values are further purified by increasing the concentration of lithium chloride in the solution to at least 8 molar and selectively extracting rare earth values from the resulting solution with a monoalkylphosphoric acid. (AEC)

  19. Condensation and fractionation of rare earths in the solar nebula

    NASA Technical Reports Server (NTRS)

    Davis, A. M.; Grossman, L.

    1979-01-01

    The condensation behavior of the rare earth elements in the solar nebula is calculated on the basis of the most recent thermodynamic data in order to construct a model explaining group II rare earth element patterns in Allende inclusions. Models considered all involve the removal of large fractions of the more refractory heavy rare earth elements in an early condensate, followed by the condensation of the remainder at a lower temperature. It is shown that the model of Boynton (1975) in which one rare earth element component is dissolved nonideally in perovskite according to relative activity coefficients can not reasonably be made to fit the observed group II patterns. A model in which two rare earth components control the patterns and dissolve ideally in perovskite is proposed and shown to be able to account for the 20 patterns by variations of the perovskite removal temperature and the relative proportions of the two components.

  20. Rare earth elements in Hamersley BIF minerals

    NASA Astrophysics Data System (ADS)

    Alibert, Chantal

    2016-07-01

    Minerals from the Hamersley banded iron formation, Western Australia, were analyzed for Y and rare earth elements (YREEs) by laser ablation ICP-MS to investigate diagenetic pathways, from precursor phases to BIF minerals. One group of apatites carries the seawater REE signature, giving evidence that P and REEs, thoroughly scavenged from the water column by Si-ferrihydrite particles, were released upon microbial Fe3+ reductive dissolution of Si-ferrihydrite in pore-water and finally sequestered mainly in authigenic apatite. The absence of fractionation between apatite and seawater suggests that REE were first incorporated into an amorphous calcium phosphate as fully hydrated cations, i.e. as outer-sphere complexes. The iron oxides and carbonates carry only a small fraction of the whole-rock REE budget. Their REE patterns are distinctly enriched in Yb and show some M-type tetrad effect consistent with experimental Kd(REE) between solid and saline solution with low carbonate ion concentrations. It is deduced that hematite formed at an incipient stage of Fe2+-catalyzed dissolution of Si-ferrihydrite, via a dissolution-reprecipitation pathway. The REE pattern of greenalite, found as sub-micron particles in quartz in a chert-siderite sample, is consistent with its authigenic origin by precipitation in pore-water after dissolution of a small amount of Si-ferrihydrite. Magnetite carries very low YREEs (ppb-level), has an homogeneous pattern distinctly enriched in the mid-REEs compared to hematite, and includes a late population depleted in light-REEs, Ba and As. Magnetite forming aggregates and massive laminae is tentatively interpreted as reflecting some fluid-aided hematite-magnetite re-equilibration or transformation at low-grade metamorphic temperatures.

  1. METHOD OF MAKING ALLOYS OF SECOND RARE EARTH SERIES METALS

    DOEpatents

    Baker, R.D.; Hayward, B.R.

    1963-01-01

    >This invention relates to a process for alloying the second rare earth series metals with Mo, Nb, or Zr. A halide of the rare earth metal is mixed with about 1 to 20 at.% of an oxide of Mo, Nb, or Zr. Iodine and an alkali or alkaline earth metal are added, and the resulting mixture is heated in an inert atmosphere to 350 deg C. (AEC)

  2. Effects of spraying rare earths on contents of rare Earth elements and effective components in tea.

    PubMed

    Wang, Dongfeng; Wang, Changhong; Ye, Sheng; Qi, Hongtao; Zhao, Guiwen

    2003-11-01

    Rare earth (RE) fertilizer is widely applied in China to increase the yield and the quality of crops including tea. However, the effects of spraying RE fertilizer on the contents of rare earth elements (REE) and effective components in tea are unknown. The results from basin and field experiments show that the values of the REE concentrations in new shoots of tea plants and the concentration of REE in the soil (REE/REEs) either from control basins or from treatment basins were smaller than those in other parts of tea plant and similar between control and treatment. The longer the interval between spraying RE fertilizer and picking the shoots of tea plants, the less the effects from spraying. About 80% summation operator REE (the sum of the concentrations of 15 REE) in tea, whether it came from spraying or not, was insoluble in the infusion. About 10% the soluble REE of summation operator REE in tea infusion was bound to polysaccharide, and the amount of REE bound polysaccharide decreased over time. At least a 25 day safety interval is needed between spraying and picking if the microelement fertilizer is used, in order to enhance tea output and to ensure tea safety. PMID:14582968

  3. Bioleaching of rare earth elements from monazite sand.

    PubMed

    Brisson, Vanessa L; Zhuang, Wei-Qin; Alvarez-Cohen, Lisa

    2016-02-01

    Three fungal strains were found to be capable of bioleaching rare earth elements from monazite, a rare earth phosphate mineral, utilizing the monazite as a phosphate source and releasing rare earth cations into solution. These organisms include one known phosphate solubilizing fungus, Aspergillus niger ATCC 1015, as well as two newly isolated fungi: an Aspergillus terreus strain ML3-1 and a Paecilomyces spp. strain WE3-F. Although monazite also contains the radioactive element Thorium, bioleaching by these fungi preferentially solubilized rare earth elements over Thorium, leaving the Thorium in the solid residual. Adjustments in growth media composition improved bioleaching performance measured as rare earth release. Cell-free spent medium generated during growth of A. terreus strain ML3-1 and Paecilomyces spp. strain WE3-F in the presence of monazite leached rare earths to concentrations 1.7-3.8 times those of HCl solutions of comparable pH, indicating that compounds exogenously released by these organisms contribute substantially to leaching. Organic acids released by the organisms included acetic, citric, gluconic, itaconic, oxalic, and succinic acids. Abiotic leaching with laboratory prepared solutions of these acids was not as effective as bioleaching or leaching with cell-free spent medium at releasing rare earths from monazite, indicating that compounds other than the identified organic acids contribute to leaching performance. PMID:26332985

  4. Rare earth elements in the Amazon basin

    NASA Astrophysics Data System (ADS)

    Gerard, M.; Seyler, P.; Benedetti, M. F.; Alves, V. P.; Boaventura, G. R.; Sondag, F.

    2003-05-01

    The rare earth element (REE) concentrations of the dissolved and particulate fractions and bed sediment between Manaus and Santarém in the Amazon River, and in some major tributaries, were evaluated. A very important zone in the Amazon basin, the encontro das aguas area where the Rio Solimões and the Rio Negro meet, was especially sampled. Different size fractions were isolated by ultrafiltration. Water samples were collected at different stages of the mixing. Three groups of waters are distinguished: group I has a low pH (<5·5) and is represented by the Negro basin rivers; group II has alkalinity less than 0·2 meq l-1 and is represented by the Rios Tapajós and Trombetas; group III has high alkalinity (>0·2 meq l-1) and higher pH (>6·5) and is represented by the Madeira basin rivers, the Solimões and the Amazon. The highest dissolved REE concentration is in the Rio Negro and the lowest in the Rio Tapajós (dissolved REEs vary by more than a factor of ten). The solubility of REEs is pH dependent: in river waters with a pH < 6 the Ce concentration is twice that of La, whereas in rivers with a higher pH the concentrations of Ce and La are similar. Dissolved REE concentrations are positively correlated with the dissolved organic carbon. Correlations between Fe, Al, and La suggest that La is associated with Al (Fe)-rich organic matter and/or related to dissolved Fe-rich inorganic material. Dissolved REEs normalized to North American shale composite show an enrichment in intermediate/heavy REEs (from Eu to Er), except for the shields rivers (such as Rio Negro and Rio Trombetas). Both of them are depleted in heavy REEs and show a relative Ce enrichment. In contrast, for the Andeans rivers (such as Rio Solimões), light REEs are slightly depleted and a negative Ce relative anomaly occurs. The pattern of the Amazon River at Óbidos confirms the major influence of the Rios Negro and Solimões with REE fractionation. For the Rio Negro, 60 to 70% of REEs are

  5. Minerals yearbook, 1988. Rare-earth minerals and metals

    SciTech Connect

    Hedrick, J.B.; Templeton, D.A.

    1988-01-01

    Domestic production of rare-earth concentrates decreased in 1988. Foreign sources of processed rare earths obtained a slightly larger share of the U.S. market, while domestic exports saw a marked increase compared to 1987 levels. Rare earths were used in high-technology applications such as laser crystals, high-strength permanent magnets, optical fibers, magnetic resonance imaging (MRI) scanners, and high-temperature superconductors. Topics discussed in the report include domestic data coverage, legislation and government programs, environmental issues, domestic production, consumption and uses, stocks, prices, foreign trade, world capacity, world review--Australia, Brazil, Canada, China, Egypt, Greenland, Japan, Madagascar, Malaysia, Mozambique, Sri Lanka, Thailand--and technology.

  6. Rare earth element association with foraminifera

    NASA Astrophysics Data System (ADS)

    Roberts, Natalie L.; Piotrowski, Alexander M.; Elderfield, Henry; Eglinton, Timothy I.; Lomas, Michael W.

    2012-10-01

    Neodymium isotopes are becoming widely used as a palaeoceanographic tool for reconstructing the source and flow direction of water masses. A new method using planktonic foraminifera which have not been chemically cleaned has proven to be a promising means of avoiding contamination of the deep ocean palaeoceanographic signal by detrital material. However, the exact mechanism by which the Nd isotope signal from bottom waters becomes associated with planktonic foraminifera, the spatial distribution of rare earth element (REE) concentrations within the shell, and the possible mobility of REE ions during changing redox conditions, have not been fully investigated. Here we present REE concentration and Nd isotope data from mixed species of planktonic foraminifera taken from plankton tows, sediment traps and a sediment core from the NW Atlantic. We used multiple geochemical techniques to evaluate how, where and when REEs become associated with planktonic foraminifera as they settle through the water column, reside at the surface and are buried in the sediment. Analyses of foraminifera shells from plankton tows and sediment traps between 200 and 2938 m water depth indicate that only ˜20% of their associated Nd is biogenically incorporated into the calcite structure. The remaining 80% is associated with authigenic metal oxides and organic matter, which form in the water column, and remain extraneous to the carbonate structure. Remineralisation of these organic and authigenic phases releases ions back into solution and creates new binding sites, allowing the Nd isotope ratio to undergo partial equilibration with the ambient seawater, as the foraminifera fall through the water column. Analyses of fossil foraminifera shells from sediment cores show that their REE concentrations increase by up to 10-fold at the sediment-water interface, and acquire an isotopic signature of bottom water. Adsorption and complexation of REE3+ ions between the inner layers of calcite contributes

  7. Decomposition of Rare Earth Loaded Resin Particles

    SciTech Connect

    Voit, Stewart L; Rawn, Claudia J

    2010-09-01

    resin is made of sulfonic acid functional groups attached to a styrene divinylbenzene copolymer lattice (long chained hydrocarbon). The metal cation binds to the sulfur group, then during thermal decomposition in air the hydrocarbons will form gaseous species leaving behind a spherical metal-oxide particle. Process development for resin applications with radioactive materials is typically performed using surrogates. For americium and curium, a trivalent metal like neodymium can be used. Thermal decomposition of Nd-loaded resin in air has been studied by Hale. Process conditions were established for resin decomposition and the formation of Nd{sub 2}O{sub 3} particles. The intermediate product compounds were described using x-ray diffraction (XRD) and wet chemistry. Leskela and Niinisto studied the decomposition of rare earth (RE) elements and found results consistent with Hale. Picart et al. demonstrated the viability of using a resin loading process for the fabrication of uranium-actinide mixed oxide microspheres for transmutation of minor actinides in a fast reactor. For effective transmutation of actinides, it will be desirable to extend the in-reactor burnup and minimize the number of recycles of used actinide materials. Longer burn times increases the chance of Fuel Clad Chemical or Mechanical Interaction (FCCI, FCMI). Sulfur is suspected of contributing to Irradiation Assisted Stress Corrosion Cracking (IASCC) thus it is necessary to maximize the removal of sulfur during decomposition of the resin. The present effort extends the previous work by quantifying the removal of sulfur during the decomposition process. Neodymium was selected as a surrogate for trivalent actinide metal cations. As described above Nd was dissolved in nitric acid solution then contacted with the AG-50W resin column. After washing the column, the Nd-resin particles are removed and dried. The Nd-resin, seen in Figure 1 prior to decomposition, is ready to be converted to Nd oxide microspheres.

  8. Compact Rare Earth Emitter Hollow Cathode

    NASA Technical Reports Server (NTRS)

    Watkins, Ronald; Goebel, Dan; Hofer, Richard

    2010-01-01

    A compact, high-current, hollow cathode utilizing a lanthanum hexaboride (LaB6) thermionic electron emitter has been developed for use with high-power Hall thrusters and ion thrusters. LaB6 cathodes are being investigated due to their long life, high current capabilities, and less stringent xenon purity and handling requirements compared to conventional barium oxide (BaO) dispenser cathodes. The new cathode features a much smaller diameter than previously developed versions that permit it to be mounted on axis of a Hall thruster ( internally mounted ), as opposed to the conventional side-mount position external to the outer magnetic circuit ("externally mounted"). The cathode has also been reconfigured to be capable of surviving vibrational loads during launch and is designed to solve the significant heater and materials compatibility problems associated with the use of this emitter material. This has been accomplished in a compact design with the capability of high-emission current (10 to 60 A). The compact, high-current design has a keeper diameter that allows the cathode to be mounted on the centerline of a 6- kW Hall thruster, inside the iron core of the inner electromagnetic coil. Although designed for electric propulsion thrusters in spacecraft station- keeping, orbit transfer, and interplanetary applications, the LaB6 cathodes are applicable to the plasma processing industry in applications such as optical coatings and semiconductor processing where reactive gases are used. Where current electrical propulsion thrusters with BaO emitters have limited life and need extremely clean propellant feed systems at a significant cost, these LaB6 cathodes can run on the crudest-grade xenon propellant available without impact. Moreover, in a laboratory environment, LaB6 cathodes reduce testing costs because they do not require extended conditioning periods under hard vacuum. Alternative rare earth emitters, such as cerium hexaboride (CeB6) can be used in this

  9. Rare earths: Market disruption, innovation, and global supply chains

    USGS Publications Warehouse

    Eggert, Roderick; Wadia, Cyrus; Anderson, Corby; Bauer, Diana; Fields, Fletcher; Meinert, Lawrence D.; Taylor, Patrick

    2016-01-01

    Rare earths, sometimes called the vitamins of modern materials, captured public attention when their prices increased more than ten-fold in 2010 and 2011. As prices fell between 2011 and 2016, rare earths receded from public view—but less visibly they became a major focus of innovative activity in companies, government laboratories and universities. Geoscientists worked to better understand the resource base and improve our knowledge about mineral deposits that will be mines in the future. Process engineers carried out research that is making primary production and recycling more efficient. Materials scientists and engineers searched for substitutes that will require fewer or no rare earths while providing properties comparable or superior to those of existing materials. As a result, even though global supply chains are not significantly different now than they were before the market disruption, the innovative activity motivated by the disruption likely will have far-reaching, if unpredictable, consequences for supply chains of rare earths in the future.

  10. Magneto-Optical Experiments on Rare Earth Garnet Films.

    ERIC Educational Resources Information Center

    Tanner, B. K.

    1980-01-01

    Describes experiments in which inexpensive or standard laboratory equipment is used to measure several macroscopic magnetic properties of thin rare earth garnet films used in the manufacture of magnetic bubble devices. (Author/CS)

  11. Rare Earth Doped High Temperature Ceramic Selective Emitters

    NASA Technical Reports Server (NTRS)

    Chubb, Donald L.; Pal, AnnaMarie; Patton, Martin O.; Jenkins, Phillip P.

    1999-01-01

    As a result of their electron structure, rare earth ions in crystals at high temperature emit radiation in several narrow bands rather than in a continuous blackbody manner. This study develops a spectral emittance model for films of rare earth containing materials. Although there are several possible rare earth doped high temperature materials, this study was confined to rare earth aluminum garnets. Good agreement between experimental and theoretical spectral emittances was found for erbium, thulium and erbium-holmium aluminum garnets. Spectral emittances of these films are sensitive to temperature differences across the film. Emitter efficiency is also a sensitive function of temperature. For thulium aluminum garnet the efficiency is 0.38 at 1700 K but only 0.19 at 1262 K.

  12. Radioluminescence study of rare earth doped some yttrium based phosphors

    NASA Astrophysics Data System (ADS)

    Ayvacıklı, Mehmet; Ege, Arzu; Ekdal, Elçin; Popovici, Elisabeth-Jeanne; Can, Nurdoğan

    2012-09-01

    This paper reports the luminescence emission spectra of Y(Ta,Nb)O4 activated by rare earth ions such as Eu3+ and Tb3+. The influence of these rare earth ions on the radioluminescence (RL) of yttrium niobate and tantalate phosphors was investigated. The luminescent properties were studied under X-ray and preliminary RL measurements to further evaluate prepared materials. The emission centers of the rare earth activators (Eu3+, Tb3+) were found to contribute efficiently to the total luminescence. With their various luminescence chromaticities, these rare earth activated phosphors are promising materials for solid-state lighting applications as well as for X-ray intensifying screens in medical diagnosis, providing the broad band variation of visible RL from blue to red.

  13. METHOD OF SEPARATING RARE EARTHS BY ION EXCHANGE

    DOEpatents

    Spedding, F.H.; Powell, J.E.

    1960-10-18

    A process is given for separating yttrium and rare earth values having atomic numbers of from 57 through 60 and 68 through 71 from an aqueous solution whose pH value can range from 1 to 9. All rare earths and yttrium are first adsorbed on a cation exchange resin, and they are then eluted with a solution of N-hydroxyethylethylenediaminetriacetic acid (HEDTA) in the order of decreasing atomic number, yttrium behaving like element 61; the effluents are collected in fractions. The HEDTA is recovered by elution with ammonia solution and the resin is regenerated with sulfuric acid. Rare earths are precipitated from the various effluents with oxalic acid, and each supernatant is passed over cation exchange resin for adsorption of HEDTA and nonprecipitated rare earths: the oxalic acid is not retained by the resin.

  14. Multilayer Thermal Barrier Coating (TBC) Architectures Utilizing Rare Earth Doped YSZ and Rare Earth Pyrochlores

    NASA Technical Reports Server (NTRS)

    Schmitt, Michael P.; Rai, Amarendra K.; Bhattacharya, Rabi; Zhu, Dongming; Wolfe, Douglas E.

    2014-01-01

    To allow for increased gas turbine efficiencies, new insulating thermal barrier coatings (TBCs) must be developed to protect the underlying metallic components from higher operating temperatures. This work focused on using rare earth doped (Yb and Gd) yttria stabilized zirconia (t' Low-k) and Gd2Zr2O7 pyrochlores (GZO) combined with novel nanolayered and thick layered microstructures to enable operation beyond the 1200 C stability limit of current 7 wt% yttria stabilized zirconia (7YSZ) coatings. It was observed that the layered system can reduce the thermal conductivity by approximately 45 percent with respect to YSZ after 20 hr of testing at 1316 C. The erosion rate of GZO is shown to be an order to magnitude higher than YSZ and t' Low-k, but this can be reduced by almost 57 percent when utilizing a nanolayered structure. Lastly, the thermal instability of the layered system is investigated and thought is given to optimization of layer thickness.

  15. Rare earths: An industry review and market outlook

    SciTech Connect

    Major-Sosias, M.A.

    1997-03-01

    A review of the global rare earths industry from production and trade, to the established and new applications that drive this unique market. The industry has been spurred by increased demand during the 1990`s, which is expected to continue into the twenty-first century. The forecast indicates additional growth, as well as the potential for the rare earths market to evolve slowly into one with a more fundamental structure.

  16. Real World of Industrial Chemistry: Technology of the Rare Earths.

    ERIC Educational Resources Information Center

    Kremers, Howard E.

    1985-01-01

    The 17 rare earth elements account for one-fifth of the 83 naturally occurring elements and collectively rank as the 22nd most abundant "element." Properties of these elements (including their chemical similarity), their extraction from the earth, and their uses are discussed. (JN)

  17. 40 CFR 421.270 - Applicability: Description of the primary rare earth metals subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... primary rare earth metals subcategory. 421.270 Section 421.270 Protection of Environment ENVIRONMENTAL... CATEGORY Primary Rare Earth Metals Subcategory § 421.270 Applicability: Description of the primary rare... production of rare earth metals and mischmetal by primary rare earth metals facilities......

  18. 40 CFR 421.270 - Applicability: Description of the primary rare earth metals subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... primary rare earth metals subcategory. 421.270 Section 421.270 Protection of Environment ENVIRONMENTAL... CATEGORY Primary Rare Earth Metals Subcategory § 421.270 Applicability: Description of the primary rare... production of rare earth metals and mischmetal by primary rare earth metals facilities......

  19. 40 CFR 421.270 - Applicability: Description of the primary rare earth metals subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... primary rare earth metals subcategory. 421.270 Section 421.270 Protection of Environment ENVIRONMENTAL... CATEGORY Primary Rare Earth Metals Subcategory § 421.270 Applicability: Description of the primary rare... production of rare earth metals and mischmetal by primary rare earth metals facilities......

  20. 40 CFR 421.270 - Applicability: Description of the primary rare earth metals subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... primary rare earth metals subcategory. 421.270 Section 421.270 Protection of Environment ENVIRONMENTAL... CATEGORY Primary Rare Earth Metals Subcategory § 421.270 Applicability: Description of the primary rare... production of rare earth metals and mischmetal by primary rare earth metals facilities......

  1. Rare earth elements in synthetic zircon. 1. synthesis, and rare earth element and phosphorus doping.

    SciTech Connect

    Hanchar, J. M.; Finch, R. J.; Hoskin, W. O.; Watson, E. B.; Cherniak, D. J.; Mariano, A. N.; Chemical Engineering; George Washington Univ.; Univ. of Canterbury; Australian National Univ.; Rensselaer Polytechnic Inst.

    2001-05-01

    Sedimentary mineral assemblages commonly contain detrital zircon crystals as part of the heavy-mineral fraction. Age spectra determined by U-Pb isotopic analysis of single zircon crystals within a sample may directly image the age composition--but not the chemical composition--of the source region. Rare earth element (REE) abundances have been measured for zircons from a range of common crustal igneous rock types from different tectonic environments, as well as kimberlite, carbonatite, and high-grade metamorphic rocks, to assess the potential of using zircon REE characteristics to infer the rock types present in sediment source regions. Except for zircon with probable mantle affinities, zircon REE abundances and normalized patterns show little intersample and intrasample variation. To evaluate the actual variation in detrital zircon REE composition in a true sediment of known mixed provenance, zircons from a sandstone sample from the Statfjord Formation (North Sea) were analyzed. Despite a provenance including high-grade metasediment and granitoids and a range in zircon age of 2.82 b.y., the zircon REEs exhibit a narrow abundance range with no systematic differences in pattern shape. These evidences show zircon REE patterns and abundances are generally not useful as indicators of provenance.

  2. Instability of some divalent rare earth ions and photochromic effect

    NASA Astrophysics Data System (ADS)

    Egranov, A. V.; Sizova, T. Yu.; Shendrik, R. Yu.; Smirnova, N. A.

    2016-03-01

    It was shown that the divalent rare earth ions (La, Ce, Gd, Tb, Lu, and Y) in cubic sites in alkaline earth fluorides are unstable with respect to electron autodetachment since its d1(eg) ground state is located in the conduction band which is consistent with the general tendency of these ions in various compounds. The localization of doubly degenerate d1(eg) level in the conduction band creates a configuration instability around the divalent rare earth ion that leading to the formation of anion vacancy in the nearest neighborhood, as was reported in the previous paper [A. Egranov, T. Sizova, Configurational instability at the excited impurity ions in alkaline earth fluorites, J. Phys. Chem. Solids 74 (2013) 530-534]. Thus, the formation of the stable divalent ions as La, Ce, Gd, Tb, Lu, and Y (PC+ centers) in CaF2 and SrF2 crystals during x-ray irradiation occurs via the formation of charged anion vacancies near divalent ions (Re2+va), which lower the ground state of the divalent ion relative to the conductivity band. Photochromic effect occurs under thermally or optically stimulated electron transition from the divalent rare earth ion to the neighboring anion vacancy and reverse under ultraviolet light irradiation. It is shown that the optical absorption of the PC+ centers due to d → d and d → f transitions of the divalent rare-earth ion.

  3. High efficiency rare-earth emitter for thermophotovoltaic applications

    NASA Astrophysics Data System (ADS)

    Sakr, E. S.; Zhou, Z.; Bermel, P.

    2014-09-01

    In this work, we propose a rare-earth-based ceramic thermal emitter design that can boost thermophotovoltaic (TPV) efficiencies significantly without cold-side filters at a temperature of 1573 K (1300 °C). The proposed emitter enhances a naturally occurring rare earth transition using quality-factor matching, with a quarter-wave stack as a highly reflective back mirror, while suppressing parasitic losses via exponential chirping of a multilayer reflector transmitting only at short wavelengths. This allows the emissivity to approach the blackbody limit for wavelengths overlapping with the absorption peak of the rare-earth material, while effectively reducing the losses associated with undesirable long-wavelength emission. We obtain TPV efficiencies of 34% using this layered design, which only requires modest index contrast, making it particularly amenable to fabrication via a wide variety of techniques, including sputtering, spin-coating, and plasma-enhanced chemical vapor deposition.

  4. High efficiency rare-earth emitter for thermophotovoltaic applications

    SciTech Connect

    Sakr, E. S.; Zhou, Z.; Bermel, P.

    2014-09-15

    In this work, we propose a rare-earth-based ceramic thermal emitter design that can boost thermophotovoltaic (TPV) efficiencies significantly without cold-side filters at a temperature of 1573 K (1300 °C). The proposed emitter enhances a naturally occurring rare earth transition using quality-factor matching, with a quarter-wave stack as a highly reflective back mirror, while suppressing parasitic losses via exponential chirping of a multilayer reflector transmitting only at short wavelengths. This allows the emissivity to approach the blackbody limit for wavelengths overlapping with the absorption peak of the rare-earth material, while effectively reducing the losses associated with undesirable long-wavelength emission. We obtain TPV efficiencies of 34% using this layered design, which only requires modest index contrast, making it particularly amenable to fabrication via a wide variety of techniques, including sputtering, spin-coating, and plasma-enhanced chemical vapor deposition.

  5. Method for treating rare earth-transition metal scrap

    DOEpatents

    Schmidt, Frederick A.; Peterson, David T.; Wheelock, John T.; Jones, Lawrence L.

    1992-12-29

    Rare earth-transition metal (e.g., iron) scrap (e.g., Nd-Fe-B scrap) is flux (slag) remelted to reduce tramp non-metallic impurities, such as oxygen and nitrogen, and metallic impurities, such as Li, Na, Al, etc., picked up by the scrap from previous fabrication operations. The tramp impurities are reduced to concentrations acceptable for reuse of the treated alloy in the manufacture of end-use articles, such as permanent magnets. The scrap is electroslag or inductoslag melted using a prefused, rare earth fluoride-bearing flux of CaF.sub.2, CaCl.sub.2 or mixtures thereof or the slag resulting from practice of the thermite reduction process to make a rare earth-iron alloy.

  6. Method for treating rare earth-transition metal scrap

    DOEpatents

    Schmidt, F.A.; Peterson, D.T.; Wheelock, J.T.; Jones, L.L.

    1992-12-29

    Rare earth-transition metal (e.g., iron) scrap (e.g., Nd-Fe-B scrap) is flux (slag) remelted to reduce tramp non-metallic impurities, such as oxygen and nitrogen, and metallic impurities, such as Li, Na, Al, etc., picked up by the scrap from previous fabrication operations. The tramp impurities are reduced to concentrations acceptable for reuse of the treated alloy in the manufacture of end-use articles, such as permanent magnets. The scrap is electroslag or inductoslag melted using a rare earth fluoride-bearing flux of CaF[sub 2], CaCl[sub 2] or mixtures thereof or the slag resulting from practice of the thermite reduction process to make a rare earth-iron alloy. 3 figs.

  7. Optical Frequency Comb Spectroscopy of Rare Earth Atoms

    NASA Astrophysics Data System (ADS)

    Swiatlowski, Jerlyn; Palm, Christopher; Joshi, Trinity; Montcrieffe, Caitlin; Jackson Kimball, Derek

    2013-05-01

    We discuss progress in our experimental program to employ optical-frequency-comb-based spectroscopy to understand the complex spectra of rare-earth atoms. We plan to carry out systematic measurements of atomic transitions in rare-earth atoms to elucidate the energy level structure and term assignment and determine presently unknown atomic state parameters. This spectroscopic information is important in view of the increasing interest in rare-earth atoms for atomic frequency standards, in astrophysical investigations of chemically peculiar stars, and in tests of fundamental physics (tests of parity and time-reversal invariance, searches for time variation of fundamental constants, etc.). We are presently studying the use of hollow cathode lamps as atomic sources for two-photon frequency comb spectroscopy. Supported by the National Science Foundation under grant PHY-0958749.

  8. Yttrium and rare earth stabilized fast reactor metal fuel

    DOEpatents

    Guon, Jerold; Grantham, LeRoy F.; Specht, Eugene R.

    1992-01-01

    To increase the operating temperature of a reactor, the melting point and mechanical properties of the fuel must be increased. For an actinide-rich fuel, yttrium, lanthanum and/or rare earth elements can be added, as stabilizers, to uranium and plutonium and/or a mixture of other actinides to raise the melting point of the fuel and improve its mechanical properties. Since only about 1% of the actinide fuel may be yttrium, lanthanum, or a rare earth element, the neutron penalty is low, the reactor core size can be reduced, the fuel can be burned efficiently, reprocessing requirements are reduced, and the nuclear waste disposal volumes reduced. A further advantage occurs when yttrium, lanthanum, and/or other rare earth elements are exposed to radiation in a reactor, they produce only short half life radioisotopes, which reduce nuclear waste disposal problems through much shorter assured-isolation requirements.

  9. Laminated rare earth structure and method of making

    DOEpatents

    Senor, David J [West Richland, WA; Johnson, Roger N [Richland, WA; Reid, Bruce D [Pasco, WA; Larson, Sandra [Richland, WA

    2002-07-30

    A laminated structure having two or more layers, wherein at least one layer is a metal substrate and at least one other layer is a coating comprising at least one rare earth element. For structures having more than two layers, the coating and metal substrate layers alternate. In one embodiment of the invention, the structure is a two-layer laminate having a rare earth coating electrospark deposited onto a metal substrate. In another embodiment of the invention, the structure is a three-layer laminate having the rare earth coating electrospark deposited onto a first metal substrate and the coating subsequently abonded to a second metal substrate. The bonding of the coating to the second metal substrate may be accomplished by hot pressing, hot rolling, high deformation rate processing, or combinations thereof. The laminated structure may be used in nuclear components where reactivity control or neutron absorption is desired and in non-nuclear applications such as magnetic and superconducting films.

  10. Refining and Mutual Separation of Rare Earths Using Biomass Wastes

    NASA Astrophysics Data System (ADS)

    Inoue, Katsutoshi; Alam, Shafiq

    2013-10-01

    Two different types of adsorption gels were prepared from biomass wastes. The first gel was produced from astringent persimmon peel rich in persimmon tannin, a polyphenol compound, which was prepared by means of simple dehydration condensation reaction using concentrated sulfuric acid for crosslinking. This adsorption gel was intended to be employed for the removal of radioactive elements, uranium (U(VI)) and thorium (Th(IV)), from rare earths. The second gel was prepared from chitosan, a basic polysaccharide, produced from shells of crustaceans such as crabs, shrimps, prawns, and other biomass wastes generated in marine product industry, by immobilizing functional groups of complexanes such as ethylendiaminetetraacetic acid and diethylentriaminepentaacetic acid (DTPA). This gel was developed for the mutual separation of rare earths. Of the two adsorption gels evaluated, the DTPA immobilized chitosan exhibited the most effective mutual separation among light rare earths.

  11. Removal of Phosphorus in Metallurgical Silicon by Rare Earth Elements

    NASA Astrophysics Data System (ADS)

    Tang, Kai; Løvvik, Ole Martin; Safarian, Jafar; Ma, Xiang; Tangstad, Merete

    2014-09-01

    Removal of phosphorus in metallurgical silicon is one of the crucial steps for the production of solar grade Si feedstock. The possibility of doping rare earth elements for phosphorus removal has in this work been studied both theoretically and experimentally. Thermochemical properties of Ce, Nd, and Pr monophosphides have first been estimated by ab initio thermodynamic simulations based on density functional theory and the direct phonon method. The reliability of the first principles calculations was assessed by coupling with the phase diagram data of the Pr-P system. Equilibrium calculations confirmed the existence of stable rare earth monophosphides in solid silicon. Experimental investigations were then carried out, employing a high temperature resistance furnace. The Ce-doped silicon samples were examined by electron probe micro analyzer and inductively coupled plasma analysis. The efficiency of phosphorus removal by means of rare earth doping was discussed in detail in the paper.

  12. Process to remove rare earth from IFR electrolyte

    DOEpatents

    Ackerman, J.P.; Johnson, T.R.

    1994-08-09

    The invention is a process for the removal of rare earths from molten chloride electrolyte salts used in the reprocessing of integrated fast reactor fuel (IFR). The process can be used either continuously during normal operation of the electrorefiner or as a batch process. The process consists of first separating the actinide values from the salt before purification by removal of the rare earths. After replacement of the actinides removed in the first step, the now-purified salt electrolyte has the same uranium and plutonium concentration and ratio as when the salt was removed from the electrorefiner. 1 fig.

  13. Process to remove rare earth from IFR electrolyte

    DOEpatents

    Ackerman, J.P.; Johnson, T.R.

    1992-01-01

    The invention is a process for the removal of rare earths from molten chloride electrolyte salts used in the reprocessing of integrated fast reactor fuel (IFR). The process can be used either continuously during normal operation of the electrorefiner or as a batch process. The process consists of first separating the actinide values from the salt before purification by removal of the rare earths. After replacement of the actinides removed in the first step, the now-purified salt electrolyte has the same uranium and plutonium concentration and ratio as when the salt was removed from the electrorefiner.

  14. THE RARE EARTH PEAK: AN OVERLOOKED r-PROCESS DIAGNOSTIC

    SciTech Connect

    Mumpower, Matthew R.; McLaughlin, G. C.; Surman, Rebecca E-mail: gail_mclaughlin@ncsu.edu

    2012-06-20

    The astrophysical site or sites responsible for the r-process of nucleosynthesis still remains an enigma. Since the rare earth region is formed in the latter stages of the r-process, it provides a unique probe of the astrophysical conditions during which the r-process takes place. We use features of a successful rare earth region in the context of a high-entropy r-process (S {approx}> 100k{sub B} ) and discuss the types of astrophysical conditions that produce abundance patterns that best match meteoritic and observational data. Despite uncertainties in nuclear physics input, this method effectively constrains astrophysical conditions.

  15. Rare earth-transition metal scrap treatment method

    DOEpatents

    Schmidt, F.A.; Peterson, D.T.; Wheelock, J.T.; Jones, L.L.; Lincoln, L.P.

    1992-02-11

    Rare earth-transition metal (e.g. iron) scrap (e.g. Nd-Fe-B scrap) is melted to reduce the levels of tramp oxygen and nitrogen impurities therein. The tramp impurities are reduced in the melt by virtue of the reaction of the tramp impurities and the rare earth to form dross on the melt. The purified melt is separated from the dross for reuse. The oxygen and nitrogen of the melt are reduced to levels acceptable for reuse of the treated alloy in the manufacture of end-use articles, such as permanent magnets. 3 figs.

  16. Rare earth-transition metal scrap treatment method

    DOEpatents

    Schmidt, Frederick A.; Peterson, David T.; Wheelock, John T.; Jones, Lawrence L.; Lincoln, Lanny P.

    1992-02-11

    Rare earth-transition metal (e.g. iron) scrap (e.g. Nd-Fe-B scrap) is melted to reduce the levels of tramp oxygen and nitrogen impurities therein. The tramp impurities are reduced in the melt by virtue of the reaction of the tramp impurities and the rare earth to form dross on the melt. The purified melt is separated from the dross for reuse. The oxygen and nitrogen of the melt are reduced to levels acceptable for reuse of the treated alloy in the manufacture of end-use articles, such as permanent magnets.

  17. Thermal Expansion and Thermal Conductivity of Rare Earth Silicates

    NASA Technical Reports Server (NTRS)

    Zhu, Dongming; Lee, Kang N.; Bansal, Narottam P.

    2006-01-01

    Rare earth silicates are considered promising candidate materials for environmental barrier coatings applications at elevated temperature for ceramic matrix composites. High temperature thermophysical properties are of great importance for coating system design and development. In this study, the thermal expansion and thermal conductivity of hot-pressed rare earth silicate materials were characterized at temperatures up to 1400 C. The effects of specimen porosity, composition and microstructure on the properties were also investigated. The materials processing and testing issues affecting the measurements will also be discussed.

  18. Process to remove rare earth from IFR electrolyte

    DOEpatents

    Ackerman, John P.; Johnson, Terry R.

    1994-01-01

    The invention is a process for the removal of rare earths from molten chloride electrolyte salts used in the reprocessing of integrated fast reactor fuel (IFR). The process can be used either continuously during normal operation of the electrorefiner or as a batch process. The process consists of first separating the actinide values from the salt before purification by removal of the rare earths. After replacement of the actinides removed in the first step, the now-purified salt electrolyte has the same uranium and plutonium concentration and ratio as when the salt was removed from the electrorefiner.

  19. Magnetic Nanofluid Rare Earth Element Extraction Process Report, Techno Economic Analysis, and Results for Geothermal Fluids

    DOE Data Explorer

    Pete McGrail

    2016-03-14

    This GDR submission is an interim technical report and raw data files from the first year of testing on functionalized nanoparticles for rare earth element extraction from geothermal fluids. The report contains Rare Earth Element uptake results (percent removal, mg Rare Earth Element/gram of sorbent, distribution coefficient) for the elements of Neodymium, Europium, Yttrium, Dysprosium, and Cesium. A detailed techno economic analysis is also presented in the report for a scaled up geothermal rare earth element extraction process. All rare earth element uptake testing was done on simulated geothermal brines with one rare earth element in each brine. The rare earth element uptake testing was conducted at room temperature.

  20. Determination of thorium and of rare earth elements in cerium earth minerals and ores

    USGS Publications Warehouse

    Carron, M.K.; Skinner, D.L.; Stevens, R.E.

    1955-01-01

    The conventional oxalate method for precipitating thorium and the rare earth elements in acid solution exhibits definite solubilities of these elements. The present work was undertaken to establish conditions overcoming these solubilities and to find optimum conditions for precipitating thorium and the rare earth elements as hydroxides and sebacates. The investigations resulted in a reliable procedure applicable to samples in which the cerium group elements predominate. The oxalate precipitations are made from homogeneous solution at pH 2 by adding a prepared solution of anhydrous oxalic acid in methanol instead of the more expensive crystalline methyl oxalate. Calcium is added as a carrier. Quantitative precipitation of thorium and the rare earth elements is ascertained by further small additions of calcium to the supernatant liquid, until the added calcium precipitates as oxalate within 2 minutes. Calcium is removed by precipitating the hydroxides of thorium and rare earths at room temperature by adding ammonium hydroxide to pH > 10. Thorium is separated as the sebacate at pH 2.5, and the rare earths are precipitated with ammonium sebacate at pH 9. Maximum errors for combined weights of thorium and rare earth oxides on synthetic mixtures are ??0.6 mg. Maximum error for separated thoria is ??0.5 mg.

  1. Potential synergy: the thorium fuel cycle and rare earths processing

    SciTech Connect

    Ault, T.; Wymer, R.; Croff, A.; Krahn, S.

    2013-07-01

    The use of thorium in nuclear power programs has been evaluated on a recurring basis. A concern often raised is the lack of 'thorium infrastructure'; however, for at least a part of a potential thorium fuel cycle, this may less of a problem than previously thought. Thorium is frequently encountered in association with rare earth elements and, since the U.S. last systematically evaluated the large-scale use of thorium (the 1970's,) the use of rare earth elements has increased ten-fold to approximately 200,000 metric tons per year. Integration of thorium extraction with rare earth processing has been previously described and top-level estimates have been done on thorium resource availability; however, since ores and mining operations differ markedly, what is needed is process flowsheet analysis to determine whether a specific mining operation can feasibly produce thorium as a by-product. Also, the collocation of thorium with rare earths means that, even if a thorium product stream is not developed, its presence in mining waste streams needs to be addressed and there are previous instances where this has caused issues. This study analyzes several operational mines, estimates the mines' ability to produce a thorium by-product stream, and discusses some waste management implications of recovering thorium. (authors)

  2. Multi-objective optimization of chromatographic rare earth element separation.

    PubMed

    Knutson, Hans-Kristian; Holmqvist, Anders; Nilsson, Bernt

    2015-10-16

    The importance of rare earth elements in modern technological industry grows, and as a result the interest for developing separation processes increases. This work is a part of developing chromatography as a rare earth element processing method. Process optimization is an important step in process development, and there are several competing objectives that need to be considered in a chromatographic separation process. Most studies are limited to evaluating the two competing objectives productivity and yield, and studies of scenarios with tri-objective optimizations are scarce. Tri-objective optimizations are much needed when evaluating the chromatographic separation of rare earth elements due to the importance of product pool concentration along with productivity and yield as process objectives. In this work, a multi-objective optimization strategy considering productivity, yield and pool concentration is proposed. This was carried out in the frame of a model based optimization study on a batch chromatography separation of the rare earth elements samarium, europium and gadolinium. The findings from the multi-objective optimization were used to provide with a general strategy for achieving desirable operation points, resulting in a productivity ranging between 0.61 and 0.75 kgEu/mcolumn(3), h(-1) and a pool concentration between 0.52 and 0.79 kgEu/m(3), while maintaining a purity above 99% and never falling below an 80% yield for the main target component europium. PMID:26375205

  3. Complex Electronic Structure of Rare Earth Activators in Scintillators

    SciTech Connect

    Aberg, D.; Yu, S. W.; Zhou, F.

    2015-10-27

    To aid and further the understanding of the microscopic mechanisms behind the scintillator nonproportionality that leads to degradation of the attainable energy resolution, we have developed theoretical and experimental algorithms and procedures to determine the position of the 4f energy levels of rare earth dopants relative to the host band edge states.

  4. Mass extrapolations in the region of deformed rare Earth nuclei

    SciTech Connect

    Borcea, C.; Audi, G.

    1998-12-21

    A procedure based on the regularity property of the mass surface is proposed to make predictions for the masses of neutron rich deformed nuclei in the rare earth region. Tables are given for the estimated masses; they extend up to the presumed limit of the deformation region.

  5. On sorption characteristics of some rare-earth oxyhydrates

    SciTech Connect

    Sukharev, Yu.I.; Lepp, Ya.N.

    1995-12-01

    As demonstrated earlier, gadolinium oxyhydrate possesses a considerable sorption capacity for some non-rare-earth elements, as well as for anions (e.g., for sulfate ions), similar to polymer oxyhydrates such as zirconium oxyhydrate. In this paper, the authors assess the selective sorption properties of gadolinium and yttrium oxyhydrates with respect to the yttrium and gadolinium cations.

  6. International strategic minerals inventory summary report; rare-earth oxides

    USGS Publications Warehouse

    Jackson, W.D.; Christiansen, Grey

    1993-01-01

    Bastnaesite, monazite, and xenotime are currently the most important rare-earth minerals. Bastnaesite occurs as a primary mineral in carbonatites. Monazite and xenotime also can be found in primary deposits but are recovered principally from heavy-mineral placers that are mined for titanium or tin. Each of these minerals has a different composition of the 15 rare-earth elements. World resources of economically exploitable rare-earth oxides (REO) are estimated at 93.4 million metric tons in place, composed of 93 percent in primary deposits and 7 percent in placers. The average mineral composition is 83 percent bastnaesite, 13 percent monazite, and 4 percent of 10 other minerals. Annual global production is about 67,000 metric tons of which 41 percent is from placers and 59 percent is from primary deposits; mining methods consist of open pits (94 percent) and dredging (6 percent). This output could be doubled if the operations that do not currently recover rare earths would do so. Resources are more than sufficient to meet the demand for the predictable future. About 52 percent of the world's REO resources are located in China. Ranking of other countries is as follows: Namibia (22 percent), the United States (15 percent), Australia (6 percent), and India (3 percent); the remainder is in several other countries. Conversely, 38 percent of the production is in China, 33 percent in the United States, 12 percent in Australia, and 5 percent each in Malaysia and India. Several other countries, including Brazil, Canada, South Africa, Sri Lanka, and Thailand, make up the remainder. Markets for rare earths are mainly in the metallurgical, magnet, ceramic, electronic, chemical, and optical industries. Rare earths improve the physical and rolling properties of iron and steel and add corrosion resistance and strength to structural members at high temperatures. Samarium and neodymium are used in lightweight, powerful magnets for electric motors. Cerium and yttrium increase the

  7. Interplay of iron and rare-earth magnetic order in rare-earth iron pnictide superconductors under magnetic field

    NASA Astrophysics Data System (ADS)

    Lei-Lei, Yang; Da-Yong, Liu; Dong-Meng, Chen; Liang-Jian, Zou

    2016-02-01

    The magnetic properties of iron pnictide superconductors with magnetic rare-earth ions under strong magnetic field are investigated based on the cluster self-consistent field method. Starting from an effective Heisenberg model, we present the evolution of magnetic structures on magnetic field in R/FeAsO (R = Ce, Pr, Nd, Sm, Gd, and Tb) and R/Fe2As2 (R = Eu) compounds. It is found that spin-flop transition occurs in both rare-earth and iron layers under magnetic field, in good agreement with the experimental results. The interplay between rare-earth and iron spins plays a key role in the magnetic-field-driven magnetic phase transition, which suggests that the rare-earth layers can modulate the magnetic behaviors of iron layers. In addition, the factors that affect the critical magnetic field for spin-flop transition are also discussed. Project supported by the National Natural Science Foundation of China (Grant Nos. 11104274, 11274310, and 11474287) and the Fundamental Research Funds for the Central Universities, China (Grant No. 27R1310020A).

  8. Systematic variation of rare-earth elements in cerium-earth minerals

    USGS Publications Warehouse

    Murata, K.J.; Rose, H.J., Jr.; Carron, M.K.; Glass, J.J.

    1957-01-01

    In a continuation of a study reported previously, rare-earth elements and thorium have been determined in monazite, allanite, cerite, bastnaesite, and a number of miscellaneous cerium-earth minerals. A quantity called sigma (???), which is the sum of the atomic percentages of La, Ce, and Pr, is proposed as an index of composition of all cerium-earth minerals with respect to the rare-earth elements. The value of ??? for all of the minerals analysed falls between 58 and 92 atomic per cent. Monazites, allanites, and cerites cover the entire observed range, whereas bastnaesites are sharply restricted to the range between 80 and 92 atomic per cent. The minimum value of ??? for a cerium-earth mineral corresponds to the smallest possible unit-cell size of the mineral. In monazite, this structurally controlled minimum value of ??? is estimated to be around 30 atomic per cent. Neodymium, because of its abundance, and yttrium, because of its small size, have dominant roles in contraction of the structure. In the other direction, the limit of variation in composition will be reached when lanthanum becomes the sole rare-earth element in a cerium-earth mineral. Cerium-earth minerals from alkalic rocks are all characterized by values of ??? greater than 80 atomic per cent, indicating that the processes that formed these rocks were unusually efficient in fractionating the rare-earth elements-efficient in the sense that a highly selected assemblage is produced without eliminating the bulk of these elements. Analyses of inner and outer parts of two large crystals of monazite from different deposits show no difference in ??? in one crystal and a slightly smaller value of ??? in the outer part of the other crystal compared to the inner part. The ??? of monazites from pegmatites that intrude genetically related granitic rocks in North Carolina is found to be either higher or lower than the ??? of monazites in the intruded host rock. These results indicate that the fractionation of the

  9. The formation of crystals in glasses containing rare earth oxides

    NASA Astrophysics Data System (ADS)

    Fadzil, Syazwani Mohd; Hrma, Pavel; Crum, Jarrod; Siong, Khoo Kok; Ngatiman, Mohammad Fadzlee; Said, Riduan Mt

    2014-02-01

    Korean spent nuclear fuel will reach the capacity of the available temporary storage by 2016. Pyroprocessing and direct disposal seems to be an alternative way to manage and reuse spent nuclear fuel while avoiding the wet reprocessing technology. Pyroprocessing produces several wastes streams, including metals, salts, and rare earths, which must be converted into stabilized form. A suitable form for rare earth immobilization is borosilicate glass. The borosilicate glass form exhibits excellent durability, allows a high waste loading, and is easy to process. In this work, we combined the rare earths waste of composition (in wt%) 39.2Nd2O3-22.7CeO2-11.7La2O3-10.9PrO2-1.3Eu2O3-1.3Gd2O3-8.1Sm2O3-4.8Y2O3 with a baseline glass of composition 60.2SiO2-16.0B2O3-12.6Na2O-3.8Al2O3-5.7CaO-1.7ZrO2. Crystallization in waste glasses occurs as the waste loading increases. It may produce complicate glass processing and affect the product quality. To study crystal formation, we initially made glasses containing 5%, 10% and 15% of La2O3 and then glasses with 5%, 10% and 15% of the complete rare earth mix. Samples were heat-treated for 24 hours at temperatures 800°C to 1150°C in 50°C increments. Quenched samples were analyzed using an optical microscope, scanning electron microscope with energy dispersive spectroscopy, and x-ray diffraction. Stillwellite (LaBSiO5) and oxyapatite (Ca2La8Si6O26) were found in glasses containing La2O3, while oxyapatite (Ca2La8Si6O26 and NaNd9Si6O26) precipitated in glasses with additions of mixed rare earths. The liquidus temperature (TL) of the glasses containing 5%, 10% and 15% La2O3 were 800°C, 959°C and 986°C, respectively; while TL was 825°C, 1059°C and 1267°C for glasses with 5%, 10% and 15% addition of mixed rare earth oxides. The component coefficients TB2O3, TSiO2, TCaO, and TRE2O3 were also evaluated using a recently published study.

  10. Recent developments of rare-earth-free hard-magnetic materials

    NASA Astrophysics Data System (ADS)

    Li, Da; Pan, DeSheng; Li, ShaoJie; Zhang, ZhiDong

    2016-01-01

    Recent advances in rare-earth-free hard-magnetic materials including magnetic bulk, thin films, nanocomposites and nanostructures are introduced. Since the costs of the rare-earth metals boosts up the price of the high-performance rare-earth permanent magnets, there is a much revived interest in various types of hard-magnetic materials based on rare-earth-free compounds. The 3d transition metals and their alloys with large coercivity and high Curie temperatures (working temperatures) are expected to overcome the disadvantages of rare-earth magnets. Making rare-earth-free magnets with a large energy product to meet tomorrow's energy needs is still a challenge.

  11. Rare-earth-metal nitridophosphates through high-pressure metathesis.

    PubMed

    Kloss, Simon David; Schnick, Wolfgang

    2015-09-14

    Developing a synthetic method to target an broad spectrum of unknown phases can lead to fascinating discoveries. The preparation of the first rare-earth-metal nitridophosphate LiNdP4 N8 is reported. High-pressure solid-state metathesis between LiPN2 and NdF3 was employed to yield a highly crystalline product. The in situ formed LiF is believed to act both as the thermodynamic driving force and as a flux to aiding single-crystal formation in dimensions suitable for crystal structure analysis. Magnetic properties stemming from Nd(3+) ions were measured by SQUID magnetometry. LiNdP4 N8 serves as a model system for the exploration of rare-earth-metal nitridophosphates that may even be expanded to transition metals. High-pressure metathesis enables the systematic study of these uncharted regions of nitride-based materials with unprecedented properties. PMID:26352033

  12. Rare Earth Doped Yttrium Aluminum Garnet (YAG) Selective Emitters

    NASA Technical Reports Server (NTRS)

    Chubb, Donald L.; Pal, AnnaMarie T.; Patton, Martin O.; Jenkins, Phillip P.

    1999-01-01

    As a result of their electron structure, rare earth ions in crystals at high temperature emit radiation in several narrow bands rather than in a continuous blackbody manner. This study presents a spectral emittance model for films and cylinders of rare earth doped yttrium aluminum garnets. Good agreement between experimental and theoretical film spectral emittances was found for erbium and holmium aluminum garnets. Spectral emittances of films are sensitive to temperature differences across the film. For operating conditions of interest, the film emitter experiences a linear temperature variation whereas the cylinder emitter has a more advantageous uniform temperature. Emitter efficiency is also a sensitive function of temperature. For holminum aluminum garnet film the efficiency is 0.35 at 1446K but only 0.27 at 1270 K.

  13. A divalent rare earth oxide semiconductor: Yttrium monoxide

    NASA Astrophysics Data System (ADS)

    Kaminaga, Kenichi; Sei, Ryosuke; Hayashi, Kouichi; Happo, Naohisa; Tajiri, Hiroo; Oka, Daichi; Fukumura, Tomoteru; Hasegawa, Tetsuya

    2016-03-01

    Rare earth oxides are usually widegap insulators like Y2O3 with closed shell trivalent rare earth ions. In this study, solid phase rock salt structure yttrium monoxide, YO, with unusual valence of Y2+ (4d1) was synthesized in a form of epitaxial thin film by pulsed laser deposition method. YO has been recognized as gaseous phase in previous studies. In contrast with Y2O3, YO was dark-brown colored and narrow gap semiconductor. The tunable electrical conductivity ranging from 10-1 to 103 Ω-1 cm-1 was attributed to the presence of oxygen vacancies serving as electron donor. Weak antilocalization behavior observed in magnetoresistance indicated significant role of spin-orbit coupling as a manifestation of 4d electron carrier.

  14. Contamination in the Rare-Earth Element Orthophosphate Reference Samples

    PubMed Central

    Donovan, John J.; Hanchar, John M.; Picolli, Phillip M.; Schrier, Marc D.; Boatner, Lynn A.; Jarosewich, Eugene

    2002-01-01

    Several of the fourteen rare-earth element (plus Sc and Y) orthophosphate standards grown at Oak Ridge National Laboratory in the 1980s and widely distributed by the Smithsonian Institution’s Department of Mineral Sciences, are significantly contaminated by Pb. The origin of this impurity is the Pb2P2O7 flux that is derived from the thermal decomposition of PbHPO4. The lead pyrophosphate flux is used to dissolve the oxide starting materials at elevated temperatures (≈1360 °C) prior to the crystal synthesis. Because these rare-earth element standards are extremely stable under the electron beam and considered homogenous, they have been of enormous value to electron probe micro-analysis (EPMA). The monoclinic, monazite structure, orthophosphates show a higher degree of Pb incorporation than the tetragonal xenotime structure, orthophosphates. This paper will attempt to describe and rationalize the extent of the Pb contamination in these otherwise excellent materials.

  15. Engineering closed optical transitions in rare-earth ion crystals

    NASA Astrophysics Data System (ADS)

    Bartholomew, John G.; Ahlefeldt, Rose L.; Sellars, Matthew J.

    2016-01-01

    We propose a protocol to preserve the spin state of rare-earth ions when they are optically cycled. This technique uses large magnetic fields to increase the probability of an optically excited ion returning to its initial spin state. This Zeeman enhanced cyclicity is shown to be applicable to non-Kramers ions in various crystals irrespective of the site symmetry. The specific example of Pr3 +:Y2SiO5 is investigated to demonstrate that the protocol can create closed optical transitions even where the point group symmetry of the site is C1. In this example, the predicted cyclicity exceeds 104. This high level of cyclicity extends the usefulness of rare-earth ion crystals for applications in quantum and classical information processing. We explore the use of this technique to enable single-ion, spin-state optical readout and the creation of ensemble-based spectral features that are robust against optical cycling.

  16. Pressure and temperature induced elastic properties of rare earth chalcogenides

    NASA Astrophysics Data System (ADS)

    Shriya, S.; Singh, N.; Sapkale, R.; Varshney, M.; Varshney, Dinesh

    2016-05-01

    The pressure and temperature dependent mechanical properties as Young modulus, Thermal expansion coefficient of rare earth REX (RE = La, Pr, Eu; X = O, S, Se, and Te) chalcogenides are studied. The rare earth chalcogenides showed a structural phase transition (B1-B2). Pressure dependence of Young modulus discerns an increase in pressure inferring the hardening or stiffening of the lattice as a consequence of bond compression and bond strengthening. Suppressed Young modulus as functions of temperature infers the weakening of the lattice results in bond weakening in REX. Thermal expansion coefficient demonstrates that REX (RE = La, Pr, Eu; X = O, S, Se, and Te) chalcogenides is mechanically stiffened, and thermally softened on applied pressure and temperature.

  17. Rare Earth Nanoprobes for Functional Biomolecular Imaging and Theranostics

    PubMed Central

    Naczynski, Dominik J.; Tan, Mei Chee; Riman, Richard E.; Moghe, Prabhas V.

    2014-01-01

    Contrast agents designed to visualize the molecular mechanisms underlying cancer pathogenesis and progression have deepened our understanding of disease complexity and accelerated the development of enhanced drug strategies targeted to specific biochemical pathways. For the next generation probes and imaging systems to be viable, they must exhibit enhanced sensitivity and robust quantitation of morphologic and contrast features, while offering the ability to resolve the disease-specific molecular signatures that may be critical to reconstitute a more comprehensive portrait of pathobiology. This feature article provides an overview on the design and advancements of emerging biomedical optical probes in general and evaluates the promise of rare earth nanoprobes, in particular, for molecular imaging and theranostics. Combined with new breakthroughs in nanoscale probe configurations, and improved dopant compositions, and multimodal infrared optical imaging, rare-earth nanoprobes can be used to address a wide variety of biomedical challenges, including deep tissue imaging, real-time drug delivery tracking and multispectral molecular profiling. PMID:24921049

  18. Thermochemistry of Rare Earth Silicates for Environmental Barrier Coatings

    NASA Technical Reports Server (NTRS)

    Costa, Gustavo; Jacobson, Nathan

    2015-01-01

    Rare earth silicates are promising candidates as environmental protective coatings (EBCs) for silica-forming ceramics and composites in combustion environments since they are predicted to have lower reactivity with the water vapor combustion products. The reactivity of rare earth silicates is assessed by the thermodynamic activity of the silica component which is best measured by Knudsen effusion mass spectrometry (KEMS). Here, we discuss a novel method based on a reducing agent to increase the partial pressure of SiO(g) which is then used to calculate thermodynamic activity of silica in Y2O3-SiO2 and Yb2O3-SiO2 systems. After the KEMS measurements, samples were probed by X-ray diffraction and their phase content was calculated from Rietveld refinement.

  19. Electronic and vibrational spectra of some rare earth trifluoromethanesulfonates crystals.

    PubMed

    Paul, P; Ghosh, M; Neogy, D; Mallick, P K

    2011-01-01

    The Raman and infrared spectra of some rare earth (dysprosium and terbium) trifluoromethanesulfonates crystals have been analyzed. Different vibrational frequencies of trifluoromethanesulfonate ions (CF3SO3-) are identified and assigned to different vibrations of the SO3 and CF3 groups. Electronic transitions of R3+ ions (R=Dy, Tb) in these salts have been assigned to transitions from the ground to different energy levels of the ground multiplet. The electronic energy levels of the rare earth ions are also determined theoretically with the help of single electron crystal field theory. They are found to yield results not only in good agreement with the observed spectral data but also in good conformity with those obtained previously from magnetic measurements. PMID:20934907

  20. Process for separation of the rare earths by solvent extraction

    DOEpatents

    Mason, George W.; Lewey, Sonia

    1977-04-05

    Production rates for solvent extraction separation of the rare earths and yttrium from each other can be improved by the substitution of di(2-ethylhexyl) mono-thiophosphoric acid for di(2-ethylhexyl) phosphoric acid. The di(2-ethylhexyl) mono-thiophosphoric acid does not form an insoluble polymer at approximately 50% saturation as does the former extractant, permitting higher feed solution concentration and thus greater throughput.

  1. Magnetostatic Effects in the Nucleation of Rare Earth Ferromagnetic Phases

    NASA Astrophysics Data System (ADS)

    Durfee, C. S.; Flynn, C. P.

    2001-07-01

    It has been reported that superheating, supercooling, and explosive kinetics coupled to other degrees of freedom occur at the ferromagnetic transitions of Er and Dy, and that metastable phases occur during the transition kinetics of Er. We explain these observations in terms of magnetostatic energy, which requires highly eccentric nuclei in the homogeneous nucleation of magnetic transitions in heavy rare earths. The magnetostatics favor transitions through ferrimagnetic intermediaries. The unusual kinetics derive from effective spin lattice relaxation.

  2. Rare Earth impurities in yb(6) and zrb(12).

    PubMed

    Fisk, Z; Matthias, B T; Corenzwit, E

    1969-12-01

    We present data on the depression of the superconducting transition temperatures of YB(6) and ZrB(12) by rare earth impurities. These data show unusual features. Ce in YB(6) is in some ways analogous to Yb in ZrB(12), and this analogy also appears to hold between Ce in CeB(6) and YB in YbB(12). PMID:16591805

  3. Trade Group Rules Against China in Rare Earths Dispute

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    2014-04-01

    The World Trade Organization (WTO) has ruled against China in a trade dispute over rare earth elements (REE) as well as tungsten and molybdenum, the group announced on 26 March. The European Union, Japan, and the United States brought trade cases against China in March 2012 concerning alleged unfair export restraints on the materials (see Eos, 93(13), 134-135, doi:10.1029/2012EO130002).

  4. Mimicking the magnetic properties of rare earth elements using superatoms

    PubMed Central

    Cheng, Shi-Bo; Berkdemir, Cuneyt; Castleman, A. W.

    2015-01-01

    Rare earth elements (REs) consist of a very important group in the periodic table that is vital to many modern technologies. The mining process, however, is extremely damaging to the environment, making them low yield and very expensive. Therefore, mimicking the properties of REs in a superatom framework is especially valuable but at the same time, technically challenging and requiring advanced concepts about manipulating properties of atom/molecular complexes. Herein, by using photoelectron imaging spectroscopy, we provide original idea and direct experimental evidence that chosen boron-doped clusters could mimic the magnetic characteristics of REs. Specifically, the neutral LaB and NdB clusters are found to have similar unpaired electrons and magnetic moments as their isovalent REs (namely Nd and Eu, respectively), opening up the great possibility in accomplishing rare earth mimicry. Extension of the superatom concept into the rare earth group not only further shows the power and advance of this concept but also, will stimulate more efforts to explore new superatomic clusters to mimic the chemistry of these heavy atoms, which will be of great importance in designing novel building blocks in the application of cluster-assembled nanomaterials. Additionally, based on these experimental findings, a novel “magic boron” counting rule is proposed to estimate the numbers of unpaired electrons in diatomic LnB clusters. PMID:25848014

  5. Structure and magnetism in rare earth strontium-doped cobaltates

    NASA Astrophysics Data System (ADS)

    James, Michael; Morales, Liliana; Wallwork, Kia; Avdeev, Maxim; Withers, Ray; Goossens, Darren

    2006-11-01

    Substantial interest has recently been generated by rare earth cobaltate compounds as cathode materials for solid oxide fuel cells. We have synthesised a wide range of single-phase perovskite-based rare earth cobaltates (Ln 1-xSr xCoO 3-δ) (Ln=La 3+-Yb 3+). A combination of electron and X-ray diffraction of these phases reveals a complex family of tetragonal and orthorhombic superstructures. The nature of structural and magnetic ordering relies on both cation and oxygen vacancy distribution. Phase boundaries exists between compounds containing large, medium and small rare earths (between Nd 3+ and Sm 3+, and also between Gd 3+ and Dy 3+) and also at different Sr-doping levels. Powder neutron diffraction has been used in conjunction with the other techniques to reveal cation and oxygen vacancy ordering within these materials. These phases show mixed valence (3+/4+) cobalt oxidation states that increases with Sr content. A range of magnetic behaviours has been observed, including ordered antiferromagnetism at elevated temperatures (>300 K) in Ho 0.2Sr 0.8CoO 2.75.

  6. Fabrication and Characterization of Rare-Earth Hexaboride Thin Films

    NASA Astrophysics Data System (ADS)

    Zhong, Zhenchen

    2001-03-01

    Rare-earth hexaboride ReB6 (Re = Gd, Ce and Nd) thin films were fabricated by a novel laser-initiated chemical processing Laser-induced deposition form solution (LISD). The advantage of this LISD technique is selective patterned area deposition and uniform thin films. This technique also has both privileges of chemical vapor deposition (CVD) and electroless deposition - efficient and simple (no chambers, no electrodes, and at room temperature). The Structures and Surfaces of the deposited rare-earth hexaboride ReB6 (Re = Gd, Ce and Nd) thin films were studied by scanning electron microscope (SEM), X-ray emission spectroscopy (XES), and X-ray diffraction (XRD). We found that these films grew with a strong texture axis. The microstructure, morphology and surface evolution in the deposited films are dependent both on the choice of solvents and laser parameters (e.g, wavelength, laser power etc) used in LISD. Rare-earth hexaborides are typically low work function materials. They can be applied as cathodes in DC plasma display panels and micro X-ray tubes.

  7. Development of rare earth regenerator materials in fine wire form

    SciTech Connect

    Wong, T.; Seuntjens, J.M.

    1997-06-01

    The use of rare earth metals, both in the pure and alloyed state, have been examined for use as regenerators in cryocooler applications and as the working material in active magnetic refrigerators. In both applications there is a requirement for the rare earth material to have a constant and uniform cross section, an average size on the order of 50-200 microns in diameter, and low levels of impurities. Existing powder production methods have drawbacks such as oxygen contamination, non-uniform size, inconsistent cross sections, and low production yields. A novel approach for the production of rare earth metals and alloys in fine wire form has been developed. This is accomplished by assembling a copperjacket and niobium barrier around a RE ingot, extruding the assembly, and reducing it with standard wire drawing practices. Strand anneals are utilized between drawing passes when necessary in order to recrystallize the RE core and restore ductility. The copperjacket is removed by chemical means at final size, leaving the Nb barrier in place as a protective coating. This process has been applied to gadolinium, dysprosium and a GdDy alloy.

  8. Correlations in rare-earth transition-metal permanent magnets

    SciTech Connect

    Skomski, R. Manchanda, P.; Kashyap, A.

    2015-05-07

    It is investigated how electron-electron correlations affect the intrinsic properties of rare-earth transition-metal magnets. Focusing on orbital moment and anisotropy, we perform model calculations for 3d-4f alloys and density-functional theory (DFT) calculations for NdCo{sub 5}. On an independent-electron level, the use of a single Slater determinant with broken spin symmetry introduces Hund's rule correlations, which govern the behavior of rare-earth ions and of alloys described by the local spin density approximation (LSDA) and LSDA + U approximations to DFT. By contrast, rare-earth ions in intermetallics involve configuration interactions between two or more Slater determinants and lead to phenomena such as spin-charge distribution. Analyzing DFT as a Legendre transformation and using Bethe's crystal-field theory, we show that the corresponding density functionals are very different from familiar LSDA-type expressions and outline the effect of spin-charge separation on the magnetocrystalline anisotropy.

  9. Magnetism of perovskite cobaltites with Kramers rare-earth ions

    SciTech Connect

    Jirák, Z. Hejtmánek, J.; Knížek, K.; Novák, P.; Šantavá, E.; Fujishiro, H.

    2014-05-07

    The band-gap insulators RECoO{sub 3} (RE = Nd{sup 3+}, Sm{sup 3+}, and Dy{sup 3+}) with Co{sup 3+} ions stabilized in the non-magnetic low-spin state have been investigated by specific heat measurements. The experiments evidence an antiferromagnetic ordering of the rare earths with Néel temperature of T{sub N} = 1.25, 1.50, and 3.60 K for NdCoO{sub 3}, SmCoO{sub 3}, and DyCoO{sub 3}, respectively. With increasing external field, the lambda peak in specific heat, indicative of the transition, shifts to lower temperatures and vanishes for field of about 3 T. Starting from this point, a broader Schottky peak is formed, centered in 1 K range, and its position is moved to higher temperatures proportionally to applied field. The origin of the peak is in Zeeman splitting of the ground Kramers doublet, and the gradual shift with field defines effective g-factors for the rare-earth pseudospins in studied compounds. The results obtained are confronted with the calculations of crystal field splitting of the rare-earth multiplets.

  10. Mimicking the magnetic properties of rare earth elements using superatoms.

    PubMed

    Cheng, Shi-Bo; Berkdemir, Cuneyt; Castleman, A W

    2015-04-21

    Rare earth elements (REs) consist of a very important group in the periodic table that is vital to many modern technologies. The mining process, however, is extremely damaging to the environment, making them low yield and very expensive. Therefore, mimicking the properties of REs in a superatom framework is especially valuable but at the same time, technically challenging and requiring advanced concepts about manipulating properties of atom/molecular complexes. Herein, by using photoelectron imaging spectroscopy, we provide original idea and direct experimental evidence that chosen boron-doped clusters could mimic the magnetic characteristics of REs. Specifically, the neutral LaB and NdB clusters are found to have similar unpaired electrons and magnetic moments as their isovalent REs (namely Nd and Eu, respectively), opening up the great possibility in accomplishing rare earth mimicry. Extension of the superatom concept into the rare earth group not only further shows the power and advance of this concept but also, will stimulate more efforts to explore new superatomic clusters to mimic the chemistry of these heavy atoms, which will be of great importance in designing novel building blocks in the application of cluster-assembled nanomaterials. Additionally, based on these experimental findings, a novel "magic boron" counting rule is proposed to estimate the numbers of unpaired electrons in diatomic LnB clusters. PMID:25848014

  11. Restoration of rare earth mine areas: organic amendments and phytoremediation.

    PubMed

    Zhou, Lingyan; Li, Zhaolong; Liu, Wen; Liu, Shenghong; Zhang, Limin; Zhong, Liyan; Luo, Ximei; Liang, Hong

    2015-11-01

    Overexploitation of rare earth mine has caused serious desertification and various environmental issues, and ecological restoration of a mining area is an important concern in China. In this study, experiments involving dry grass landfilling, chicken manure broadcasting, and plant cultivation were carried out to reclaim a rare earth mine area located in Heping County, Guangdong Province, China. The prime focus was to improve soil quality in terms of nutrients, microbial community, enzyme activity, and physicochemical properties so as to reclaim the land. After 2 years of restoration, an increase of organic matter (OM), available potassium (K), available phosphorus (P) levels, and acid phosphatase (ACP) activity and a reduction of the available nitrogen (N) level and urease (URE) activity in soil were achieved compared to the original mined land. The nutrients and enzyme activities in soil with 5 years of restoration were close to or surpass those in the unexploited land as control. The bulk density, total porosity, water holding capacity, pH, and electrical conductivity (EC) of soil were improved, and the number of cultivable microorganisms and the bacterial diversity in soil were greatly increased with time during ecological restoration, especially for surface soil. Furthermore, the artificial vegetation stably grew at the restored mining sites. The results indicated that organic amendments and phytoremediation could ecologically restore the rare earth mining sites and the mined land could finally be planted as farmland. PMID:26139395

  12. Two hundred years of rare earths, 1787--1987

    SciTech Connect

    Gschneidner, K.A. Jr.; Capellen, J.

    1987-01-01

    The Rare-earth Information Center celebrated the 200th anniversary of the discovery of ytterbite by inviting its readers to write stories on what the readers thought were some of the important highlights of the first 200 years of rare earths. Four of these stories were published, in a shortened version, in one of the four quarterly issues of the /ital RIC News/. All of the stories submitted, including the four published, were to be part of a booklet published by RIC and to be distributed to any one requesting it. RIC decided to include a ''letter to the editor'' and the editor's response concerning the year Arrhenius made his initial discovery. Also, we have included a 1984 article which was written on the occasion of a special issue commemorating the 100th volume of the /ital Journal of the Less-Common Metals/. In this paper, K.A. Gschneidner Jr., reviews the history and current events of rare earth metallurgy and makes some observations concerning its future /endash/ an appropriate concluding paper in this special booklet. In July of 1987 North-Holland Physics Publishing offered to typeset, print and publish these articles as a joint RIC/endash/North-Holland publication. And this is the result. 52 refs., 2 figs., 3 tabs.

  13. Alternatives to Rare Earth Permanent Magnets for Energy Harvesting Applications

    NASA Astrophysics Data System (ADS)

    Khazdozian, Helena; Hadimani, Ravi; Jiles, David

    Direct-drive permanent magnet generators (DDPMGs) offer increased reliability and efficiency over the more commonly used geared doubly-fed induction generator, yet are only employed in less than 1 percent of utility scale wind turbines in the U.S. One major barrier to increased deployment of DDPMGs in the U.S. wind industry is NdFeB permanent magnets (PMs), which contain critical rare earth elements Nd and Dy. To allow for the use of rare earth free PMs, the magnetic loading, defined as the average magnetic flux density over the rotor surface, must be maintained. Halbach cylinders are employed in 3.5kW Halbach PMGs (HPMGs) of varying slot-to-pole ratio to concentrate the magnetic flux output by a lower energy density PM over the rotor surface. We found that for high pole and slot number, the increase in magnetic loading is sufficient to allow for the use of strontium iron oxide hard ferrite PMs and achieved rated performance. Joule losses in the stator windings were found to increase for the hard ferrite PMs due to increased inductance in the stator windings. However, for scaling of the HPMG designs to 3MW, rated performance and high efficiency were achieved, demonstrating the potential for elimination for rare earth PMs in commercial scale wind turbines. This work was supported by the National Science Foundation under Grant No. 1069283 and a Barbara and James Palmer Endowment at Iowa State University.

  14. Correlations in rare-earth transition-metal permanent magnets

    NASA Astrophysics Data System (ADS)

    Skomski, R.; Manchanda, P.; Kashyap, A.

    2015-05-01

    It is investigated how electron-electron correlations affect the intrinsic properties of rare-earth transition-metal magnets. Focusing on orbital moment and anisotropy, we perform model calculations for 3d-4f alloys and density-functional theory (DFT) calculations for NdCo5. On an independent-electron level, the use of a single Slater determinant with broken spin symmetry introduces Hund's rule correlations, which govern the behavior of rare-earth ions and of alloys described by the local spin density approximation (LSDA) and LSDA + U approximations to DFT. By contrast, rare-earth ions in intermetallics involve configuration interactions between two or more Slater determinants and lead to phenomena such as spin-charge distribution. Analyzing DFT as a Legendre transformation and using Bethe's crystal-field theory, we show that the corresponding density functionals are very different from familiar LSDA-type expressions and outline the effect of spin-charge separation on the magnetocrystalline anisotropy.

  15. Investigations into Rare Earth Oxide Use and Behaviour

    NASA Astrophysics Data System (ADS)

    Pryce, Owen

    2010-05-01

    The use of tracers which are applied to soils (distinguishable from tracers naturally present in soils) is increasing. Rare earth oxides (REOs) are the most prevalent of the sediment tracers used to tag soils in this manner. REOs have been applied in a host of different countries, at a range of scales e.g. over watersheds in the USA (Polyakov and Nearing, 2004; Kimoto et al., 2006); to examine rill erosion in China (Li et al., 2006); and to investigate the importance of topographical features in arable fields in the EU (Stevens and Quinton, 2008). Many successful experiments have been conducted using the suit of REO tracers, yielding important information on the behaviour of eroding sediments. However, the majority of publications have focused upon application of REO tracers, applying the tagging and extraction methods developed by Zhang et al., (2001, 2003). Furthermore, the techniques presently being used are known to generate methodological inaccuracies, such as tracer enrichment and non-uniform REO distributions on experimental plots, and analytical interferences when ICP-MS is used for tracer quantification. Unanswered questions regarding the use of REO tracers include: i) what is the effect upon soil of REO tagging?; ii) how is a uniform distribution of REOs in tagged soil achieved? iii) which is the most suitable way of applying REOs, to experimental plots of different scale, and to meet different objectives?; iv) which REOs are unsuitable for sediment tracing?; v) what is the most precise and efficient method of extracting REO tracers from sediments? vi) is the transport behaviour of REO tracers comparable to untagged soils? In an attempt to answer some of these questions, investigations have been conducted into the effect upon soil particle size of different methods of REO tagging. The ability of these methods to provide uniform distributions of REOs in the tagged soil was calculated. The accuracy and precision of published (Zhang et al., 2003; Stevens and

  16. 77 FR 58578 - Certain Sintered Rare Earth Magnets, Methods of Making Same and Products Containing Same...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-21

    ... COMMISSION Certain Sintered Rare Earth Magnets, Methods of Making Same and Products Containing Same... the sale within the United States after importation of certain sintered rare earth magnets, methods of... after importation of certain sintered rare earth magnets, methods of making same and products...

  17. 40 CFR 721.10550 - Rare earth salt of a carboxylic acid (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Rare earth salt of a carboxylic acid... Specific Chemical Substances § 721.10550 Rare earth salt of a carboxylic acid (generic). (a) Chemical... as rare earth salt of a carboxylic acid (PMN P-05-324) is subject to reporting under this section...

  18. 40 CFR 721.10550 - Rare earth salt of a carboxylic acid (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Rare earth salt of a carboxylic acid... Specific Chemical Substances § 721.10550 Rare earth salt of a carboxylic acid (generic). (a) Chemical... as rare earth salt of a carboxylic acid (PMN P-05-324) is subject to reporting under this section...

  19. Coal fly ash as a resource for rare earth elements.

    PubMed

    Franus, Wojciech; Wiatros-Motyka, Małgorzata M; Wdowin, Magdalena

    2015-06-01

    Rare earth elements (REE) have been recognised as critical raw materials, crucial for many clean technologies. As the gap between their global demand and supply increases, the search for their alternative resources becomes more and more important, especially for the countries which depend highly on their import. Coal fly ash (CFA), which when not utilised is considered waste, has been regarded as the possible source of many elements, including REE. Due to the increase in the energy demand, CFA production is expected to grow, making research into the use of this material a necessity. As Poland is the second biggest coal consumer in the European Union, the authors have studied different coal fly ashes from ten Polish power plants for their rare earth element content. All the fly ashes have a broadly similar distribution of rear earth elements, with light REE being dominant. Most of the samples have REE content relatively high and according to Seredin and Dai (Int J Coal Geol 94: 67-93, 2012) classification can be considered promising REE raw materials. PMID:25613802

  20. The formation of crystals in glasses containing rare earth oxides

    SciTech Connect

    Fadzil, Syazwani Mohd; Hrma, Pavel; Crum, Jarrod; Siong, Khoo Kok; Ngatiman, Mohammad Fadzlee; Said, Riduan Mt

    2014-02-12

    Korean spent nuclear fuel will reach the capacity of the available temporary storage by 2016. Pyroprocessing and direct disposal seems to be an alternative way to manage and reuse spent nuclear fuel while avoiding the wet reprocessing technology. Pyroprocessing produces several wastes streams, including metals, salts, and rare earths, which must be converted into stabilized form. A suitable form for rare earth immobilization is borosilicate glass. The borosilicate glass form exhibits excellent durability, allows a high waste loading, and is easy to process. In this work, we combined the rare earths waste of composition (in wt%) 39.2Nd{sub 2}O{sub 3}–22.7CeO{sub 2}–11.7La{sub 2}O{sub 3}–10.9PrO{sub 2}–1.3Eu{sub 2}O{sub 3}–1.3Gd{sub 2}O{sub 3}–8.1Sm{sub 2}O{sub 3}–4.8Y{sub 2}O{sub 3} with a baseline glass of composition 60.2SiO{sub 2}–16.0B{sub 2}O{sub 3}–12.6Na{sub 2}O–3.8Al{sub 2}O{sub 3}–5.7CaO–1.7ZrO{sub 2}. Crystallization in waste glasses occurs as the waste loading increases. It may produce complicate glass processing and affect the product quality. To study crystal formation, we initially made glasses containing 5%, 10% and 15% of La{sub 2}O{sub 3} and then glasses with 5%, 10% and 15% of the complete rare earth mix. Samples were heat-treated for 24 hours at temperatures 800°C to 1150°C in 50°C increments. Quenched samples were analyzed using an optical microscope, scanning electron microscope with energy dispersive spectroscopy, and x-ray diffraction. Stillwellite (LaBSiO{sub 5}) and oxyapatite (Ca{sub 2}La{sub 8}Si{sub 6}O{sub 26}) were found in glasses containing La{sub 2}O{sub 3}, while oxyapatite (Ca{sub 2}La{sub 8}Si{sub 6}O{sub 26} and NaNd{sub 9}Si{sub 6}O{sub 26}) precipitated in glasses with additions of mixed rare earths. The liquidus temperature (T{sub L}) of the glasses containing 5%, 10% and 15% La{sub 2}O{sub 3} were 800°C, 959°C and 986°C, respectively; while T{sub L} was 825°C, 1059°C and 1267°C for glasses

  1. Transition Probabilities of the Rare Earth Neutral Lanthanum

    NASA Astrophysics Data System (ADS)

    Palmer, Andria; Lawler, James E.; Den Hartog, Elizabeth

    2015-01-01

    In continuation of a long-standing project to measure transition probabilities for rare earth elements, La i is currently being studied. Transition probabilities of the rare earths and other elements are determined in order to assist astronomers in making stellar spectroscopy more quantitative. Atomic spectroscopy is a key tool for astronomers as it provides nearly all the details about the physics and chemistry of the universe outside of our solar system. Rare earth elements tend to have complex electronic structure due to their open 4f, 5d, 6s, and 6p shells. This leads to a rich spectrum throughout the ultraviolet, visible and near-infrared, making them very accessible elements for study in stellar photospheric spectra. A transition probability is the probability per unit time for a transition to occur between an upper level and a lower level. The process for measuring transition probabilities is by using the well-established technique of time-resolved laser-induced fluorescence to measure the radiative lifetimes for each upper level. This is then combined with branching fractions measured using a 1m high-resolution Fourier Transform Spectrometer. Radiative lifetimes for ~70 upper levels of neutral La along with their associated branching fractions will be reported, resulting in the determination of several hundred new transition probabilities. These transition probabilities will assist astronomers in analyzing the chemical compositions of older, cooler stars which give insight into the origins of the chemical elements.This work supported by by NSF grant AST-1211055 (JEL & EDH) and by the NSF REU program (AJP).

  2. SEPARATION OF TRANSURANIC ELEMENTS FROM RARE EARTH COMPOUNDS

    DOEpatents

    Kohman, T.P.

    1961-11-21

    A process of separating neptunium and plutonium values from rare earths and alkaline earth fission products present on a solid mixed actinide carrier (Th or U(IV) oxalate or fluoride) --fission product carrier (LaF/sub 3/, CeF/sub 3/, SrF/sub 2/, CaF/sub 2/, YF/sub 3/, La oxalate, cerous oxalate, Sr oxalate, Ca oxalate or Y oxalate) by extraction of the actinides at elevated temperature with a solution of ammonium fluoride and/or ammonium oxalate is described. Separation of the fission-product-containing carriers from the actinide solution formed and precipitation of the neptunium and plutonium from the solution with mineral acid are also accomplished. (AEC)

  3. A fast dynamic mode in rare earth based glasses

    NASA Astrophysics Data System (ADS)

    Zhao, L. Z.; Xue, R. J.; Zhu, Z. G.; Ngai, K. L.; Wang, W. H.; Bai, H. Y.

    2016-05-01

    Metallic glasses (MGs) usually exhibit only slow β-relaxation peak, and the signature of the fast dynamic is challenging to be observed experimentally in MGs. We report a general and unusual fast dynamic mode in a series of rare earth based MGs manifested as a distinct fast β'-relaxation peak in addition to slow β-relaxation and α-relaxation peaks. We show that the activation energy of the fast β'-relaxation is about 12RTg and is equivalent to the activation of localized flow event. The coupling of these dynamic processes as well as their relationship with glass transition and structural heterogeneity is discussed.

  4. Anomalous Hall Effect in a Feromagnetic Rare-Earth Cobalite

    NASA Technical Reports Server (NTRS)

    Samoilov, A. V.; Yeh, N. C.; Vasquez, R. P.

    1996-01-01

    Rare-Earth manganites and cobalites with the perovskite structure have been a subject of great recent interest because their electrical resistance changes significantly when a magnetic field is applied...we have studied the Hall effect in thin film La(sub 0.5)Ca(sub 0.5)CoO(sub 3) material and have obtained convincing evidence fo the so called anomalous Hall effect, typical for magnetic metals...Our results suggest that near the ferromagnetic ordering temperature, the dominant electron scattering mechanism is the spin fluctuation.

  5. Rare earth luminescence: A way to overcome concentration quenching

    NASA Astrophysics Data System (ADS)

    Benz, Felix; Strunk, Horst P.

    2012-12-01

    A model is developed to simulate the rare earth luminescence intensity in dependence of both the excitation rate and the dopant concentration. For low excitation rates, as in the case of photoluminescence investigations, concentration quenching is expected. In contrast for high excitation rates (as generally realized in cathodoluminescence experiments) concentration quenching can be suppressed and thus luminescence intensity increases with increasing dopant concentration. These results reconcile the recent photo- and cathodoluminescence results on GaN:Er presented by Chen et al. (APL 96, 181901, 2010), 10.1063/1.3421535. Further experimental results indicate that the physical basis of the model is adequate.

  6. Observation of Anomalous Phonons in Orthorhombic Rare-earth Manganites

    SciTech Connect

    P Gao; H Chen; T Tyson; Z Liu; J Bai; L Wang; Y Chio; S Cheong

    2011-12-31

    We observe the appearance of a phonon near the lock-in temperature in orthorhombic REMnO{sub 3} (RE denotes rare earth) (RE: Lu and Ho) and anomalous phonon hardening in orthorhombic LuMnO{sub 3}. The anomalous phonon occurs at the onset of spontaneous polarization. No such changes were found in incommensurate orthorhombic DyMnO{sub 3}. These observations directly reveal different electric polarization mechanisms in the E-type and incommensurate-type orthorhombic REMnO{sub 3}.

  7. Rare earth element content of cryptocrystalline magnesites of Konya, Turkey

    NASA Astrophysics Data System (ADS)

    Zedef, Veysel; Russell, Michael

    2016-04-01

    We examined the rare earth element content of several cryptocrystalline magnesites as well as hydromagnesite, host rock serpentinites, lake water and hot spring water from Turkey. Southwestern Turkey hosts cryptocrystalline magnesites, sedimentary magnesites with presently forming, biologically mediated hydromagnesites and travertines. Our results show the REE content of the minerals, rocks and waters are well below detection limits. One hydromagnesite sample from Lake Salda has slightly high La (2.38ppb), Ce (3.91 ppb) and Nd (1.68 ppb) when compared to other samples, but these are also still below detection limits of the method we followed.

  8. Synthesis of nanocrystalline rare earth oxides by glycothermal method

    SciTech Connect

    Hosokawa, Saburo; Iwamoto, Shinji; Inoue, Masashi

    2008-11-03

    The reaction of yttrium acetate hydrate in 1,2-propanediol at 300 deg. C yielded a product containing acetate groups and glycol moieties. From this product, Y{sub 2}O{sub 3} was directly crystallized at 400 deg. C without the formation of a carbonate oxide phase. The thus-obtained Y{sub 2}O{sub 3} samples had a small crystallite size (2.2 nm) and significantly large surface area (280 m{sup 2}/g). Other nanocrystalline rare earth (Gd-Yb) oxides were also obtained by this method.

  9. Double-exchange mechanism in rare-earth compounds

    SciTech Connect

    Gulacsi, M.

    2015-03-15

    We show that double-exchange mechanism is responsible for ferromagnetism in low dimensional rare-earth compounds. We use the bosonized version of the one-dimensional Anderson lattice model in Toulouse limit to characterize the properties of the emerging ferromagnetic phase. We give a comprehensive description of the ferromagnetic ordering of the correlated electrons which appears at intermediate couplings and doping. The obtained ferromagnetic phase transitions have been identified to be an order–disorder transition of the quantum random transverse-field Ising type.

  10. Raman Investigations of Rare Earth Arsenate Single Crystals

    SciTech Connect

    Barros, G; Santos, C. C.; Ayala, A. P.; Guedes, I.; Boatner, Lynn A; Loong, C. K.

    2010-01-01

    Polarized Raman Spectroscopy was used to investigate the room-temperature phonon characteristics of a series of rare-earth arsenate (REAsO4, RE = Sm, Eu, Gd, Tb, Dy, Ho, Tm, Yb, and Lu) single crystals. The Raman data were interpreted in a systematic manner based on the known tetragonal zircon structure of these compounds, and assignments and correlations were made for the observed bands. We found that the wavenumber of the internal modes of the AsO4 tetrahedron increased with increasing atomic number, and for three out of four lattice wavenumbers observed, this tendency was not nearly so marked as in the case of the internal mode wavenumber.

  11. Compositional and phase relations among rare earth element minerals

    NASA Technical Reports Server (NTRS)

    Burt, D. M.

    1989-01-01

    A review is presented that mainly treats minerals in which the rare-earth elements are essential constituents, e.g., bastnaesite, monazite, xenotime, aeschynite, allanite. The chemical mechanisms and limits of REE substitution in some rock-forming minerals (zircon, apatite, titanite, garnet) are also derived. Vector representation of complex coupled substitutions in selected REE-bearing minerals is examined and some comments on REE-partitioning between minerals as related to acid-based tendencies and mineral stabilities are presented. As the same or analogous coupled substitutions involving the REE occur in a wide variety of mineral structures, they are discussed together.

  12. Rare earth element patterns in biotite, muscovite and tourmaline minerals

    SciTech Connect

    Laul, J.C.; Lepel, E.A.

    1986-04-21

    Rare earth element concentrations in the minerals biotite and muscovite from the mica schist country rocks of the Etta pegmatite and tourmalines from the Bob Ingersoll pegmatite have been measured by INAA and CNAA. The concentrations range from 10/sup -4/ g/g to 10/sup -10g//sub g/. The REE patterns of biotite, muscovite and tourmaline reported herein are highly fractionated from light to heavy REE. The REE concentrations in biotite and muscovite are high and indigenous. The pegmatite tourmalines contain low concentrations of REE. Variations in tourmaline REE patterns reflect the geochemical evolution of pegmatite melt/fluid system during crystallization.

  13. On the brittle nature of rare earth pnictides

    NASA Astrophysics Data System (ADS)

    Shriya, S.; Sapkale, R.; Singh, N.; Varshney, M.; Varshney, Dinesh

    2016-05-01

    The high-pressure structural phase transition and pressure as well temperature induced elastic properties in ReY; (Re = La, Sc, Pr; Y = N, P, As, Sb, Bi) pnictides have been performed using effective interionic interaction potential with emphasis on charge transfer interactions and covalent contribution. Estimated values of phase transition pressure and the volume discontinuity in pressure-volume phase diagram indicate the structural phase transition from NaCl to CsCl structure. From the investigations of elastic constants the pressure (temperature) dependent volume collapse/expansion, second order Cauchy discrepancy, anisotropy, hardness and brittle/ductile nature of rare earth pnictides are computed.

  14. Small hole polarons in rare-earth titanates

    SciTech Connect

    Bjaalie, L.; Moetakef, P.; Cain, T. A.; Janotti, A.; Himmetoglu, B.; Stemmer, S.; Van de Walle, C. G.; Ouellette, D. G.; Allen, S. J.

    2015-06-08

    We investigate the behavior of hole polarons in rare-earth titanates by combining optical conductivity measurements with first-principles hybrid density functional calculations. Sr-doped GdTiO{sub 3} (Gd{sub 1−x}Sr{sub x}TiO{sub 3}) was grown by molecular beam epitaxy. We show that a feature in the optical conductivity that was previously identified with the Mott-Hubbard gap is actually associated with the excitation of a small polaron. The assignment is based on an excellent match between the experimental spectra and first-principles calculations for polaron excitation mechanisms.

  15. Rare Earth doped nanoparticles in imaging and PDT

    PubMed Central

    Yust, Brian G.; Sardar, Dhiraj K.; Mimun, Lawrence C.; Gangadharan, Ajith K.; Tsin, Andrew T.

    2014-01-01

    Nanoparticles doped with rare earth ions for biomedical imaging and infrared photodynamic therapy (IRPDT) have been synthesized, characterized, and compared. Specifically, these nanoparticles utilize two primary modalities: near infrared excitation and emission for imaging, and near infrared upconversion for photodynamic therapy. These nanoparticles are optimized for both their infrared emission and upconversion energy transfer to a photoactive agent conjugated to the surface. Finally, these nanoparticles are tested for toxicity, imaged in cells using the near infrared emission pathway, and used for selective killing of cells through the upconversion driven IRPDT. PMID:25429335

  16. Synthesis and optical characterization of rare earth nanofluorides

    NASA Astrophysics Data System (ADS)

    Lezhnina, M. M.; Kaetker, H.; Kynast, U. H.

    2007-10-01

    Different pathways for facile syntheses of rare earth fluoride nanoparticles are discussed. One group deals with zeolite and sol-gel-matrix supported materials and their characteristics, the other surveys freestanding nanoparticles obtained from hydrothermal and solvothermal methods. While nanoparticles in SiO2 based matrices do not match the optical performance of bulk materials, freestanding particles can be modified by surface coordination or core-shell concepts to approach the efficiency of 'classical' materials, with the added value of dispersability in apolar organic solvents, to eventually allow the transparent imbedding in polymer matrices.

  17. Resonance electronic Raman scattering in rare earth crystals

    SciTech Connect

    Williams, G.M.

    1988-11-10

    The intensities of Raman scattering transitions between electronic energy levels of trivalent rare earth ions doped into transparent crystals were measured and compared to theory. A particle emphasis was placed on the examination of the effect of intermediate state resonances on the Raman scattering intensities. Two specific systems were studied: Ce/sup 3 +/(4f/sup 1/) in single crystals of LuPO/sub 4/ and Er/sup 3 +/(4f/sup 11/) in single crystals of ErPO/sub 4/. 134 refs., 92 figs., 33 tabs.

  18. Rare-earth pnictides and chalcogenides from first-principles.

    PubMed

    Petit, L; Szotek, Z; Lüders, M; Svane, A

    2016-06-01

    This review tries to establish what is the current understanding of the rare-earth monopnictides and monochalcogenides from first principles. The rock salt structure is assumed for all the compounds in the calculations and wherever possible the electronic structure/properties of these compounds, as obtained from different ab initio methods, are compared and their relation to the experimental evidence is discussed. The established findings are summarised in a set of conclusions and provide outlook for future study and possible design of new materials. PMID:27165563

  19. A fast dynamic mode in rare earth based glasses.

    PubMed

    Zhao, L Z; Xue, R J; Zhu, Z G; Ngai, K L; Wang, W H; Bai, H Y

    2016-05-28

    Metallic glasses (MGs) usually exhibit only slow β-relaxation peak, and the signature of the fast dynamic is challenging to be observed experimentally in MGs. We report a general and unusual fast dynamic mode in a series of rare earth based MGs manifested as a distinct fast β'-relaxation peak in addition to slow β-relaxation and α-relaxation peaks. We show that the activation energy of the fast β'-relaxation is about 12RTg and is equivalent to the activation of localized flow event. The coupling of these dynamic processes as well as their relationship with glass transition and structural heterogeneity is discussed. PMID:27250316

  20. Rare-earth pnictides and chalcogenides from first-principles

    NASA Astrophysics Data System (ADS)

    Petit, L.; Szotek, Z.; Lüders, M.; Svane, A.

    2016-06-01

    This review tries to establish what is the current understanding of the rare-earth monopnictides and monochalcogenides from first principles. The rock salt structure is assumed for all the compounds in the calculations and wherever possible the electronic structure/properties of these compounds, as obtained from different ab initio methods, are compared and their relation to the experimental evidence is discussed. The established findings are summarised in a set of conclusions and provide outlook for future study and possible design of new materials.

  1. Coherent optical ultrasound detection with rare-earth ion dopants.

    PubMed

    Tay, Jian Wei; Ledingham, Patrick M; Longdell, Jevon J

    2010-08-10

    We describe theoretical and experimental demonstration for optical detection of ultrasound using a spectral hole engraved in cryogenically cooled rare-earth ion-doped solids. Our method utilizes the dispersion effects due to the spectral hole to perform phase-to-amplitude modulation conversion. Like previous approaches using spectral holes, it has the advantage of detection with large étendue. The method also has the benefit that high sensitivity can be obtained with moderate absorption contrast for the spectral holes. PMID:20697433

  2. Intermediate phases in some rare earth-ruthenium systems

    NASA Technical Reports Server (NTRS)

    Sharifrazi, P.; Raman, A.; Mohanty, R. C.

    1984-01-01

    The phase equilibria and crystal structures of intermediate phases were investigated in eight representative RE-Ru systems using powder X-ray diffraction and metallographic techniques. The Fe3C, Mn5C2 and Er5Ru3 structures occur in all but the Ce-Ru systems. Phases analogous to Er5Ru3 possess an unknown crystal structure similar to Er5Rh3(I). MgCu2 and MgZn2 type Laves phases are encountered in the light rare earth and heavy rare earth systems, respectively, and RERu2 phases, where RE = Nd and Sm, possess both the Laves phase structures. An intermediate phase, NdRu, with an unknown structure, occurs only in the Nd-Ru system. A bcc structure with 40 atoms per unit cell is encountered in the phases Er3Ru2 and Y3Ru2. The behavior of cerium in Ce-Ru alloys is unique in that four unidentified structures, not encountered in other RE-Ru systems, have been encountered. Also a phase designated as Ce3Ru is found with the Th7Fe3 type structure.

  3. Crystal chemistry of hydrothermally grown ternary alkali rare earth fluorides.

    PubMed

    McMillen, Colin D; Comer, Sara; Fulle, Kyle; Sanjeewa, Liurukara D; Kolis, Joseph W

    2015-12-01

    The structural variations of several alkali metal rare earth fluoride single crystals are summarized. Two different stoichiometric formulations are considered, namely those of ARE2F7 and ARE3F10 (A = K, Rb, Cs; RE = Y, La-Lu), over a wide range of ionic radii of both the alkali and rare earth (RE) ions. Previously reported and several new single-crystal structures are considered. The new single crystals are grown using hydrothermal methods and the structures are compared with literature reports of structures grown from both melts and hydrothermal fluids. The data reported here are combined with the literature data to gain a greater understanding of structural subtleties surrounding these systems. The work underscores the importance of the size of the cations to the observed structure type and also introduces synthetic technique as a contributor to the same. New insights based on single-crystal structure analysis in the work introduce a new disordered structure type in the case of ARE2F7, and examine the trends and boundaries of the ARE3F10 stoichiometry. Such fundamental structural information is useful in understanding the potential applications of these compounds as optical materials. PMID:26634734

  4. Multicomponent, Rare-Earth-Doped Thermal-Barrier Coatings

    NASA Technical Reports Server (NTRS)

    Miller, Robert A.; Zhu, Dongming

    2005-01-01

    Multicomponent, rare-earth-doped, perovskite-type thermal-barrier coating materials have been developed in an effort to obtain lower thermal conductivity, greater phase stability, and greater high-temperature capability, relative to those of the prior thermal-barrier coating material of choice, which is yttria-partially stabilized zirconia. As used here, "thermal-barrier coatings" (TBCs) denotes thin ceramic layers used to insulate air-cooled metallic components of heat engines (e.g., gas turbines) from hot gases. These layers are generally fabricated by plasma spraying or physical vapor deposition of the TBC materials onto the metal components. A TBC as deposited has some porosity, which is desirable in that it reduces the thermal conductivity below the intrinsic thermal conductivity of the fully dense form of the material. Undesirably, the thermal conductivity gradually increases because the porosity gradually decreases as a consequence of sintering during high-temperature service. Because of these and other considerations such as phase transformations, the maximum allowable service temperature for yttria-partially stabilized zirconia TBCs lies in the range of about 1,200 to 1,300 C. In contrast, the present multicomponent, rare-earth-doped, perovskite-type TBCs can withstand higher temperatures.

  5. Assessing rare earth elements in quartz rich geological samples.

    PubMed

    Santoro, A; Thoss, V; Guevara, S Ribeiro; Urgast, D; Raab, A; Mastrolitti, S; Feldmann, J

    2016-01-01

    Sodium peroxide (Na2O2) fusion coupled to Inductively Coupled Plasma Tandem Mass Spectrometry (ICP-MS/MS) measurements was used to rapidly screen quartz-rich geological samples for rare earth element (REE) content. The method accuracy was checked with a geological reference material and Instrumental Neutron Activation Analysis (INAA) measurements. The used mass-mode combinations presented accurate results (only exception being (157)Gd in He gas mode) with recovery of the geological reference material QLO-1 between 80% and 98% (lower values for Lu, Nd and Sm) and in general comparable to INAA measurements. Low limits of detection for all elements were achieved, generally below 10 pg g(-1), as well as measurement repeatability below 15%. Overall, the Na2O2/ICP-MS/MS method proved to be a suitable lab-based method to quickly and accurately screen rock samples originating from quartz-rich geological areas for rare earth element content; particularly useful if checking commercial viability. PMID:26595776

  6. Assembly of uniaxially aligned rare-earth-free nanomagnets

    SciTech Connect

    Balamurugan, B; Das, B; Shah, VR; Skomski, R; Li, XZ; Sellmyer, DJ

    2012-09-17

    We report HfCo7 nanoparticles with appreciable permanent-magnet properties (magnetocrystalline anisotropy K-1 approximate to 10 Mergs/cm(3), coercivity H-c approximate to 4.4 kOe, and magnetic polarization J(s) approximate to 10.9 kG at 300 K) deposited by a single-step cluster-deposition method. The direct crystalline-ordering of nanoparticles during the gas-aggregation process, without the requirement of a high-temperature thermal annealing, provides an unique opportunity to align their easy axes uniaxially by applying a magnetic field of about 5 kOe prior to deposition, and subsequently to fabricate exchange-coupled nanocomposites having J(s) as high as 16.6 kG by co-depositing soft magnetic Fe-Co. This study suggests HfCo7 as a promising rare-earth-free permanent-magnet alloy, which is important for mitigating the critical-materials aspects of rare-earth elements. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4753950

  7. Impurity-sensitized luminescence of rare earth-doped materials

    SciTech Connect

    Smentek, Lidia . E-mail: smentek1@aol.com

    2005-02-15

    The accuracy of the theoretical model of impurity-sensitized luminescence in rare earth-doped materials presented here is adjusted to the demands of precise modern experimental techniques. The description is formulated within the double perturbation theory, and it is based on the assumption that electrostatic interactions between the subsystems that take part in the luminescence process are the most important ones. The amplitude of the energy transfer is determined by the contributions that represent the perturbing influence of the crystal-field potential and also electron correlation effects taken into account within the rare earth ions. In this way, the model is defined beyond the standard free ionic system and single configuration approximations. The new contributions to the energy transfer amplitude are expressed in the terms of effective tensor operators, and they contain the perturbing influence of various excited configurations. In order to maintain the high accuracy of the model, the radial integrals of all effective operators are defined within the so-called perturbed function approach. This means that they are evaluated for the complete radial basis sets of one electron functions of given symmetry, including the continuum.

  8. Magnetic alignment study of rare-earth-containing liquid crystals.

    PubMed

    Galyametdinov, Yury G; Haase, Wolfgang; Goderis, Bart; Moors, Dries; Driesen, Kris; Van Deun, Rik; Binnemans, Koen

    2007-12-20

    The liquid-crystalline rare-earth complexes of the type [Ln(LH)3(DOS)3]-where Ln is Tb, Dy, Ho, Er, Tm, or Yb; LH is the Schiff base N-octadecyl-4-tetradecyloxysalicylaldimine; and DOS is dodecylsulfate-exhibit a smectic A phase. Because of the presence of rare-earth ions with a large magnetic anisotropy, the smectic A phase of these liquid crystals can be easier aligned in an external magnetic field than smectic A phases of conventional liquid crystals. The magnetic anisotropy of the [Ln(LH)3(DOS)3] complexes was determined by measurement of the temperature-dependence of the magnetic susceptibility using a Faraday balance. The highest value for the magnetic anisotropy was found for the dysprosium(III) complex. The magnetic alignment of these liquid crystals was studied by time-resolved synchrotron small-angle X-ray scattering experiments. Depending on the sign of the magnetic anisotropy, the director of the liquid-crystalline molecules was aligned parallel or perpendicular to the magnetic field lines. A positive value of the magnetic anisotropy (and parallel alignment) was found for the thulium(III) and the ytterbium(III) complexes, whereas a negative value of the magnetic anisotropy (and perpendicular alignment) was observed for the terbium(III) and dysprosium(III) complexes. PMID:18044875

  9. Bacterial Cell Surface Adsorption of Rare Earth Elements

    NASA Astrophysics Data System (ADS)

    Jiao, Y.; Park, D.; Reed, D.; Fujita, Y.; Yung, M.; Anderko, A.; Eslamimanesh, A.

    2015-12-01

    Rare earth elements (REE) play a critical role in many emerging clean energy technologies, including high-power magnets, wind turbines, solar panels, hybrid/electric vehicle batteries and lamp phosphors. In order to sustain demand for such technologies given current domestic REE shortages, there is a need to develop new approaches for ore processing/refining and recycling of REE-containing materials. To this end, we have developed a microbially-mediated bioadsorption strategy with application towards enrichment of REE from complex mixtures. Specifically, the bacterium Caulobacter crescentus was genetically engineered to display lanthanide binding tags (LBTs), short peptides that possess high affinity and specificity for rare earth elements, on its cell surface S-layer protein. Under optimal conditions, LBT-displayed cells adsorbed greater than 5-fold more REE than control cells lacking LBTs. Competition binding experiments with a selection of REEs demonstrated that our engineered cells could facilitate separation of light- from heavy- REE. Importantly, binding of REE onto our engineered strains was much more favorable compared to non-REE metals. Finally, REE bound to the cell surface could be stripped off using citrate, providing an effective and non-toxic REE recovery method. Together, this data highlights the potential of our approach for selective REE enrichment from REE containing mixtures.

  10. Sublattice Magnetic Relaxation in Rare Earth Iron Garnets

    SciTech Connect

    McCloy, John S.; Walsh, Brian

    2013-07-08

    The magnetic properties of rare earth garnets make them attractive materials for applications ranging from optical communications to magnetic refrigeration. The purpose of this research was to determine the AC magnetic properties of several rare earth garnets, in order to ascertain the contributions of various sublattices. Gd3Fe5O¬12, Gd3Ga5O12, Tb3Fe5O12, Tb3Ga5O12, and Y3Fe5O12 were synthesized by a solid state reaction of their oxides and verified by x-ray diffraction. Frequency-dependent AC susceptibility and DC magnetization were measured versus temperature (10 – 340 K). Field cooling had little effect on AC susceptibility, but large effect on DC magnetization, increasing magnetization at the lowest temperature and shifting the compensation point to lower temperatures. Data suggest that interaction of the two iron lattices results in the two frequency dependent magnetic relaxations in the iron garnets, which were fit using the Vogel-Fulcher and Arrhenius laws.

  11. The Magnetic Ordering of Heavy Rare Earth Metals

    NASA Astrophysics Data System (ADS)

    Nordström, Lars

    1998-03-01

    The electronic and magnetic structures of the rare earth metals with hcp structure (Gd--Tm) are calculated by a full-potential LAPW method, which allows for non-collinear magnetism within the local approximation to spin-density functional theory. The 4f electrons are taken as localized, but their spin moment constrained as to fulfil Russel-Saunders coupling, polarizes the itinerant valence electrons. It is found that there are two competing magnetic structures; the ferromagnetic state, which dominates for the left-most elements (Gd and Tb), and a planar helical wave, which is found to have lowest energy for the last elements Er and Tm. In Ho the competition between the two leads to a compromise --- a helical cone. This trend is in accordance with the experimental situation. The mechanism behind the stabilization of the helical wave is confirmed to be an opening of a partial gap at the so-called ``webbing'' of the Fermi surface. This feature is found to exhibit nesting, a fact which is known both from earlier non-spin-polarized calculations and de Haas-van Alphen measurements. In contrast to prevailing models and earlier more primitive calculations, this nesting is found to exist for all elements, i.e. even for gadolinium. Instead, the magnitude of the spin splitting of the valence electrons due to the magnetic 4f states, is found to be an important quantity which has been missed out in the standard models for the magnetic structure of the rare earths.

  12. Rare earths exposure and male infertility: the injury mechanism study of rare earths on male mice and human sperm.

    PubMed

    Chen, Jun; Xiao, Heng-Jun; Qi, Tao; Chen, Di-Ling; Long, He-Ming; Liu, Song-Hao

    2015-02-01

    The weight; testis/body coefficient; levels of LDH, SDH, SODH, G-6PD, and testosterone; cell cycle; and cell apoptosis of the male mice were influenced after being treated with 200 mg/[kg/day] of rare earths suspension for 3 weeks. The "Raman fingerprints" of the human sperm DNA exposed to 0.040 mg/ml CeCl3 were very different from those of the untreated; the Raman bands at 789 cm(-1) (backbone phosphodiester), PO4 backbone at 1,094 cm(-1), methylene deformation mode at 1,221 cm(-1), methylene deformation mode at 1,485 cm(-1), and amide II at 1,612 cm(-1), of which intensities and shifts were changed, might be the diagnostic biomarkers or potential therapeutic targets. The injury mechanism might be that the rare earths influence the oxidative stress and blood testosterone barrier, tangle the big biomolecule concurrently, which might cause the testicular cells and vascular system disorder and/or dysfunction, and at the same time change the physical and chemical properties of the sperm directly. PMID:25167826

  13. Rare Earth Metal/semiconductor Interfaces and Compounds

    NASA Astrophysics Data System (ADS)

    Nogami, Jun

    Interfaces formed at room temperature by incremental deposition of rare earth metals onto semiconductor substrates have been studied with surface sensitive soft X-ray photoelectron spectroscopy. The trends in core level lineshape and intensity with increasing metal coverage have been used to deduce an outline of the evolution and the final morphology of the interfacial region on a microscopic scale. Measurements were taken for Ytterbium (Yb) on Silicon (Si), Germanium, and Gallium Arsenide, and for Gadolinium (Gd) and Europium (Eu) on Silicon. The Yb/Si interface work was supported by comparable measurements of bulk Yb silicide samples of known composition and crystal structure. In a general sense, the behavior of all the systems studied is similar. At very low metal coverages, the metal atoms chemisorb and are weakly bonded to the substrate. The 4f core levels indicate that the metal-metal atom coordination is relatively low at this stage. The interaction with the substrate strengthens with increasing coverage, culminating in the formation of a strongly reacted phase at between 1 and 3 monolayers (ML). The strong reaction is limited to a narrow region at room temperature. At less than 10 ML coverage, the surface of the sample is almost indistinguishable from the pure metal. Details of the behavior such as the reactivity at low coverage, the compounds formed at the interface, the morphology at the surface at intermediate coverages, the final interfacial width, and the amount of substrate atom outdiffusion and surface segregation can all vary from system to system. It is in explaining the causes of some of these differences that insight about what governs the behavior of all of these rare earth metal/semiconductor systems has been obtained. The divalent metals (Yb, Eu) are significantly less reactive than trivalent Gd at sub-monolayer coverages. For the divalent metals the formation of a metal-rich phase is strongly favored in the reaction at the interface, whereas

  14. Thermochemical study of rare earth and nitrogen incorporation in glasses

    NASA Astrophysics Data System (ADS)

    Zhang, Yahong

    Rare earth containing aluminosilicate, borosilicate, aluminate and nitrogen containing aluminosilicate glasses are technically important materials. They have extraordinary physical and chemical properties such as high glass transition temperature, very low electrical conductivity, and excellent chemical stability. These unique properties lead to applications as coatings on metals and ceramics, optical fibers, semiconductors, and nuclear waste containment materials. In addition, such systems contain the most widely used additives for sintering of Si3N4, SiAlON and SiC ceramics for high temperature applications. Thermodynamic properties and the relations among energetics, structure and bonding are essential to controlling processing parameters to synthesize, at lower cost, materials having better properties. Earlier investigations mainly pertained to specific physical properties of rare-earth doped oxide and oxynitride glasses. Work on the thermodynamic stability and materials compatibility has been very sparse. High temperature solution calorimetry in molten oxide solvents is a powerful tool for the thermodynamic study of refractory materials. With implementation and improvement, this technique has been applied to the first measurement of enthalpies of formation of RE-Si-Al-O glasses, REAlO3 glasses, RE-Si-Al-O-N glasses, and Si3N 4 and Ge3N4 with high pressure spinel structure. The first successful synthesis of REAlO3 glasses has been achieved by containerless melting. Their large enthalpies of crystallization confirm that they are reluctant glass formers. For glasses along the 2REAlO3 -3SiO2 join, the strongly negative heats of mixing support the absence of miscibility gaps except possibly at very high silica content. Energetic evidence has been presented for incipient phase-ordered regions in Gd- or Hf-containing sodium alumino-borosilicate glasses for plutonium immobilization. Linear relations between enthalpies of formation of RESiAlON glasses from elements and

  15. 40 CFR 721.10423 - Complex strontium aluminate, rare earth doped (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... earth doped (generic). 721.10423 Section 721.10423 Protection of Environment ENVIRONMENTAL PROTECTION... New Uses for Specific Chemical Substances § 721.10423 Complex strontium aluminate, rare earth doped... substances identified generically as complex strontium aluminate, rare earth doped (PMNs P-12-22, P-12-23,...

  16. Proposal for laser cooling of rare-earth ions

    NASA Astrophysics Data System (ADS)

    Lepers, Maxence; Hong, Ye; Wyart, Jean-François; Dulieu, Olivier

    2016-01-01

    The efficiency of laser cooling relies on the existence of an almost closed optical-transition cycle in the energy spectrum of the considered species. In this respect, rare-earth elements exhibit many transitions which are likely to induce noticeable leaks from the cooling cycle. In this work, to determine whether laser cooling of singly ionized erbium Er+ is feasible, we have performed accurate electronic-structure calculations of energies and spontaneous-emission Einstein coefficients of Er+, using a combination of ab initio and least-squares-fitting techniques. We identify five weak closed transitions suitable for laser cooling, the broadest of which is in the kilohertz range. For the strongest transitions, by simulating the cascade dynamics of spontaneous emission, we show that repumping is necessary, and we discuss possible repumping schemes. We expect our detailed study on Er+ to give good insight into the laser cooling of neighboring ions such as Dy+.

  17. Actinides and Rare Earths Topical Conference (Code AC)

    SciTech Connect

    Tobin, J G

    2009-11-24

    Actinide and the Rare Earth materials exhibit many unique and diverse physical, chemical and magnetic properties, in large part because of the complexity of their f electronic structure. This Topical Conference will focus upon the chemistry, physics and materials science in Lanthanide and Actinide materials, driven by 4f and 5f electronic structure. Particular emphasis will be placed upon 4f/5f magnetic structure, surface science and thin film properties. For the actinides, fundamental actinide science and its role in resolving technical challenges posed by actinide materials will be stressed. Both basic and applied experimental approaches, including synchrotron-radiation-based investigations, as well as theoretical modeling and computational simulations, are planned to be part of the Topical Conference. Of particular importance are the issues related to the potential renaissance in Nuclear Fuels, including synthesis, oxidation, corrosion, intermixing, stability in extreme environments, prediction of properties via benchmarked simulations, separation science, environmental impact and disposal of waste products.

  18. Vanadium oxide bronzes containing rare-earth elements

    SciTech Connect

    Volkov, V.L.; Zubkov, V.G.; Fedyukov, A.S.; Zainulin, Yu.G.

    1988-05-01

    We attempted to make phases having the general formula Ln/sub x/V/sub 2/O/sub 5/ (Ln = La, Eu, Yb) without success; the specimens usually consisted of three phases: the rare-earth orthovanadate LnVO/sub 4/, vanadium(V) oxide, and VO/sub 2/. To shift the process to give Ln/sub x/V/sub 2/O/sub 5/, heat treatment was applied to mixtures of the initial high-purity substances. The x-ray patterns were recorded with a DRON-UM1 apparatus with Cr K..cap alpha.. radiation and were processed by the Poroshok program. The IR spectra were recorded with UR-20 spectrometer with oil mulls.

  19. Corrosion behavior of rare earth modified WC-12Co coating

    NASA Astrophysics Data System (ADS)

    Liu, Yan; Chen, Hui; Ceng, Shengbo; Gou, Guoqing; Tu, Mingjing

    2015-03-01

    Rare earth has been widely used in materials manufacturing to improve hardness and toughness. In this paper, conventional, nano-modified and CeO2 modified WC-12Co coatings are produced by using high speed oxygen flaming (HVOF) spraying technology. Long-term immersion and electrochemical tests of these coatings in 3.5 wt.% NaCl solution are conducted. The surface morphologies were observed to investigate the corrosion mechanisms. The results show CeO2 modified WC-12Co coatings to possess the best corrosion resistance but the nano-modified WC-12Co coating has the worst performance. Results suggest that the improvement of corrosion resistance for CeO2 modified WC-12Co coating can be attributed to the enhancement of interfacial strength between Co binder phase and WC particles.

  20. Thermopower studies of rare earth doped lanthanum barium manganites

    NASA Astrophysics Data System (ADS)

    Reddy, G. Lalitha; Lakshmi, Y. Kalyana; kumar, N. Pavan; Rao, S. Manjunath; Reddy, P. Venugopal

    2014-08-01

    Influence of rare earth doping on electrical, magnetic and thermopower studies of La0.34Re0.33Ba0.33MnO3 compound was investigated. Ferro to paramagnetic transition and metal to insulator transition temperatures decrease with decreasing ionic radius of the dopant ion. Electrical resistivity in the entire temperature range is explained by phase separation model. The magnitude of Seebeck coefficient increases with increasing dopant ionic radius. A cross over from negative to positive sign has also been observed in thermopower data with decreasing A site ionic radius (). The low temperature thermopower data has been explained using a qualitative model containing diffusion; magnon drag and phonon drag effects while the paramagnetic insulating part has been analyzed using small polaron hopping mechanism.

  1. Instrumentation for Measuring Thermodynamic Properties of Rare-Earth Compounds

    NASA Astrophysics Data System (ADS)

    Urbina, Ulises I.; Thompson, Jonathon; Ho, Pei-Chun

    2010-03-01

    Current models on some Rare-Earth compounds cannot fully account for their strongly correlated electron behavior, which give rise to phenomenon such as unconventional superconductivity, heavy Fermion, and quantum critical behavior. The specific heat, thermopower, and thermal conductivity measurements give important thermodynamic properties, such as effective electronic mass, stiffness of the lattice (Debye temperature), entropy, density of states of charge carriers, and phase transitions which are crucial in characterizing these materials of interest in our laboratory. A calorimeter and a thermopower-thermal conductivity probe, which are using a modified relaxation method and standard steady-state heat flow technique, respectively, are constructed for the above purpose. Detailed schematic diagram and operating principles will be discussed in the report.

  2. Standard reference water samples for rare earth element determinations

    USGS Publications Warehouse

    Verplanck, P.L.; Antweiler, R.C.; Nordstrom, D.K.; Taylor, H.E.

    2001-01-01

    Standard reference water samples (SRWS) were collected from two mine sites, one near Ophir, CO, USA and the other near Redding, CA, USA. The samples were filtered, preserved, and analyzed for rare earth element (REE) concentrations (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) by inductively coupled plasma-mass spectrometry (ICP-MS). These two samples were acid mine waters with elevated concentrations of REEs (0.45-161 ??g/1). Seventeen international laboratories participated in a 'round-robin' chemical analysis program, which made it possible to evaluate the data by robust statistical procedures that are insensitive to outliers. The resulting most probable values are reported. Ten to 15 of the participants also reported values for Ba, Y, and Sc. Field parameters, major ion, and other trace element concentrations, not subject to statistical evaluation, are provided.

  3. Gaps and pseudogaps in perovskite rare earth nickelates

    SciTech Connect

    Allen, S. James; Ouellette, Daniel G.; Kally, James; Kozhanov, Alex; Hauser, Adam J.; Mikheev, Evgeny; Zhang, Jack Y.; Moreno, Nelson E.; Son, Junwoo; Stemmer, Susanne; Balents, Leon

    2015-06-01

    We report on tunneling measurements that reveal the evolution of the quasiparticle state density in two rare earth perovskite nickelates, NdNiO{sub 3} and LaNiO{sub 3}, that are close to a bandwidth controlled metal to insulator transition. We measure the opening of a sharp gap of ∼30 meV in NdNiO{sub 3} in its insulating ground state. LaNiO{sub 3}, which remains a correlated metal at all practical temperatures, exhibits a pseudogap of the same order. The results point to both types of gaps arising from a common origin, namely, a quantum critical point associated with the T = 0 K metal-insulator transition. The results support theoretical models of the quantum phase transition in terms of spin and charge instabilities of an itinerant Fermi surface.

  4. Exposure, metabolism, and toxicity of rare earths and related compounds.

    PubMed Central

    Hirano, S; Suzuki, K T

    1996-01-01

    For the past three decades, most attention in heavy metal toxicology has been paid to cadmium, mercury, lead, chromium, nickel, vanadium, and tin because these metals widely polluted the environment. However, with the development of new materials in the last decade, the need for toxicological studies on those new materials has been increasing. A group of rare earths (RE) is a good example. Although some RE have been used for superconductors, plastic magnets, and ceramics, few toxicological data are available compared to other heavy metals described above. Because chemical properties of RE are very similar, it is plausible that their binding affinities to biomolecules, metabolism, and toxicity in the living system are also very similar. In this report, we present an overview of the metabolism and health hazards of RE and related compounds, including our recent studies. Images Figure 1. A Figure 1. B Figure 1. C PMID:8722113

  5. Large Magnetoresistance Effects in Novel Layered Rare Earth Halides

    NASA Astrophysics Data System (ADS)

    Kremer, R. K.; Ryazanov, M.; Simon, A.

    We give a survey of the structures, electric, magnetic and magnetoresistance properties of the two novel low dimensional rare-earth halide systems, GdI2 and GdIHy (2/3 < y ≤ 1). The large magnetoresistance e.ect observed for GdI2 can be understood on the basis of a conventional spin disorder scattering mechanism, however, strongly magni.ed by the structural anisotropy and the special topology of the Fermi surface. Bound magnetic polarons are formed in GdIHy leading to a metal insulator transition below ~ 30 K. The mobility of the magnetic polarons can be e.ectively modi.ed by external magnetic .fields resulting in the large experimentally found magnetoresistance.

  6. Rare Earth core/shell nanobarcodes for multiplexed trace biodetection.

    PubMed

    Chen, Lei; Li, Xiaomin; Shen, Dengke; Zhou, Lei; Zhu, Dan; Fan, Chunhai; Zhang, Fan

    2015-06-01

    Multiplexed detection technology has been attractive for its simultaneous assay of several analytes, which play significant roles in applications such as screening for combinatorial chemistry, genetic analysis, and clinical diagnostics. This work reports a novel and potentially powerful encoding system based upon dispersible suspension arrays of multilayer rare earth core/shell nanoparticles that are capable of multiplexed, high-sensitivity reporting for biomolecule detection by the Z-contrast imaging. These nanobarcode arrays are encoded by nanostructure design based on different atomic numbers. With the well-resolved high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) decoding technique, many thousands of unique nanobarcodes can be identified by multilayer core/shell nanostructure. Their applications to multiplexed biodetection of DNA demonstrated the highly sensitive (picomole) features of this novel nanobarcode system. PMID:25951110

  7. Radiative Performance of Rare Earth Garnet Thin Film Selective Emitters

    NASA Technical Reports Server (NTRS)

    Lowe, Roland A.; Chubb, Donald L.; Good, Brian S.

    1994-01-01

    In this paper we present the first emitter efficiency results for the thin film 40 percent Er-1.5 percent Ho YAG (Yttrium Aluminum Garnet, Y3Al5O12) and 25 percent Ho YAG selective emitter at 1500 K with a platinum substrate. Spectral emittance and emissive power measurements were made (1.2 less than lambda less than 3.2 microns). Emitter efficiency and power density are significantly improved with the addition of multiple rare earth dopants. Predicted efficiency results are presented for an optimized (equal power density in the Er, (4)I(sub 15/2)-(4)I(sub 13/2) at 1.5 microns, and Ho, (5)I(sub 7)-(5)I(sub 8) at 2.0 micron emission bands) Er-Ho YAG thin film selective emitter.

  8. Rare-earth substitutions in Z-type hexaferrites

    NASA Astrophysics Data System (ADS)

    Jacquiod, Catherine; Autissier, Denis

    1992-02-01

    Z-type hexaferrite (Ba 3Co 2Fe 24O 41) presents a gyromagnetic permeability whose resonance frequency stands around 2 GHz. The damping coefficient α is less than 0.1. The influence on the damping coefficient of doping this ferrite by a rare-earth (La) has been studied. Powders have been synthesized by carbonate coprecipitation, dried and calcined at different temperatures. Different phases have been characterized by X-ray diffraction and magnetization measurements. Solubility in the range of weak concentrations has been verified. The synthesized powders were processed by slip casting in the presence of a magnetic field in order to align the particles. The microstructural and hyperfrequency characteristics have been evaluated. The influence of the substitution on anisotropy fields and damping are studied in comparison with pure Co 2Z, whose processing and properties have been optimized as a reference.

  9. Uncovering the Global Life Cycles of the Rare Earth Elements

    PubMed Central

    Du, Xiaoyue; Graedel, T. E.

    2011-01-01

    The rare earth elements (REE) are a group of fifteen elements with unique properties that make them indispensable for a wide variety of emerging, critical technologies. Knowledge of the life cycles of REE remains sparse, despite the current heightened interest in their future availability. Mining is heavily concentrated in China, whose monopoly position and potential restriction of exports render primary supplies vulnerable to short and long-term disruption. To provide an improved perspective we derived the first quantitative life cycles (for the year 2007) for ten REE: lanthanum (La), cerium (Ce), praseodymium (Pr), neodymium (Nd), samarium (Sm), europium (Eu), gadolinium (Gd), terbium (Tb), dysprosium (Dy), and yttrium (Y). Of these REE, Ce and Nd in-use stocks are highest; the in-use stocks of most REE show significant accumulation in modern society. Industrial scrap recycling occurs only from magnet manufacture. We believe there is no post-customer recycling of any of these elements. PMID:22355662

  10. Pressure-induced exotic states in rare earth hexaborides

    NASA Astrophysics Data System (ADS)

    Sun, Liling; Wu, Qi

    2016-08-01

    Finding the exotic phenomena in strongly correlated electron systems (SCESs) and understanding the corresponding microphysics have long been the research frontiers of condensed matter physics. The remarkable examples for the intriguing phenomena discovered in past years include unconventional superconductivity, heavy Fermion behaviors, giant magneto-resistance and so on. A fascinating type of rare earth hexaboride RB6 (R  =  Sm, Yb, Eu and Ce) belongs to a strongly correlated electron system (SCES), but shows unusual ambient-pressure and high-pressure behaviors beyond the phenomena mentioned above. Particularly, the recent discovery of the coexistence of an unusual metallic surface state and an insulating bulk state in SmB6, known to be a Kondo insulator decades ago, by theoretical calculations and many experimental measurements creates new interest for the investigation of the RB6. This significant progress encourages people to revisit the RB6 with an attempt to establish a new physics that links the SCES and the unusual metallic surface state which is a common feature of a topological insulator (TI). It is well known that pressure has the capability of tuning the electronic structure and modifying the ground state of solids, or even inducing a quantum phase transition which is one of the kernel issues in studies of SCESs. In this brief review, we will describe the progress in high pressure studies on the RB6 based on our knowledge and research interests, mainly focusing on the pressure-induced phenomena in YbB6 and SmB6, especially on the quantum phase transitions and their connections with the valence state of the rare earth ions. Moreover, some related high-pressure results obtained from CeB6 and EuB6 are also included. Finally, a summary is given in the conclusions and perspectives section.

  11. Pressure-induced exotic states in rare earth hexaborides.

    PubMed

    Sun, Liling; Wu, Qi

    2016-08-01

    Finding the exotic phenomena in strongly correlated electron systems (SCESs) and understanding the corresponding microphysics have long been the research frontiers of condensed matter physics. The remarkable examples for the intriguing phenomena discovered in past years include unconventional superconductivity, heavy Fermion behaviors, giant magneto-resistance and so on. A fascinating type of rare earth hexaboride RB6 (R  =  Sm, Yb, Eu and Ce) belongs to a strongly correlated electron system (SCES), but shows unusual ambient-pressure and high-pressure behaviors beyond the phenomena mentioned above. Particularly, the recent discovery of the coexistence of an unusual metallic surface state and an insulating bulk state in SmB6, known to be a Kondo insulator decades ago, by theoretical calculations and many experimental measurements creates new interest for the investigation of the RB6. This significant progress encourages people to revisit the RB6 with an attempt to establish a new physics that links the SCES and the unusual metallic surface state which is a common feature of a topological insulator (TI). It is well known that pressure has the capability of tuning the electronic structure and modifying the ground state of solids, or even inducing a quantum phase transition which is one of the kernel issues in studies of SCESs. In this brief review, we will describe the progress in high pressure studies on the RB6 based on our knowledge and research interests, mainly focusing on the pressure-induced phenomena in YbB6 and SmB6, especially on the quantum phase transitions and their connections with the valence state of the rare earth ions. Moreover, some related high-pressure results obtained from CeB6 and EuB6 are also included. Finally, a summary is given in the conclusions and perspectives section. PMID:27376406

  12. Rare Earth Doped Magnetic Clusters of Gold for Medical Application

    NASA Astrophysics Data System (ADS)

    Yadav, Brahm Deo; Kumar, Vijay

    2011-03-01

    In recent years gold clusters have been studied extensively due to their unusual properties and applications in cancer treatment and catalysis. Small gold clusters having up to 15 atoms are planar as shown in figure 1. Thereafter a transition occurs to 3D structures but the atomic structures continue to have high dispersion. Doping of these clusters could transform them in to new structures and affect the properties. Gold clusters with cage structures such as W@Au12 can be prepared with large highest occupied-lowest unoccupied molecular orbital (HOMO-LUMO) gap by doping with a transition metal atom such as W. By changing the transition metal atom, cage structures of different sizes as well as different HOMO-LUMO gaps can be formed which could be useful in different optical applications. In these structures gold clusters are generally non-magnetic. However, it is also possible to form magnetic clusters of gold such as Gold clusters have been found to be good for cancer treatment. We have performed ab initio calculations on doping of rare earths in small gold clusters to obtain magnetic clusters using projector augmented wave pseudopotential method within generalized gradient approximation for the exchange-correlation energy. Elemental gold clusters having up to 15 atoms are planar and thereafter 3D structures become favorable. We have explored the changes in the growth behavior when a rare earth atom is doped and studied the variation in the magnetic behavior as a function of size. Our results suggest that gold clusters may have twin advantage of treating cancer as well as be helful in magnetic imaging such as by MRI.

  13. Rare earth activated yttrium aluminate phosphors with modulated luminescence.

    PubMed

    Muresan, L E; Popovici, E J; Perhaita, I; Indrea, E; Oro, J; Casan Pastor, N

    2016-06-01

    Yttrium aluminate (Y3 A5 O12 ) was doped with different rare earth ions (i.e. Gd(3+) , Ce(3+) , Eu(3+) and/or Tb(3+) ) in order to obtain phosphors (YAG:RE) with general formula,Y3-x-a Gdx REa Al5 O12 (x = 0; 1.485; 2.97 and a = 0.03). The synthesis of the phosphor samples was done using the simultaneous addition of reagents technique. This study reveals new aspects regarding the influence of different activator ions on the morpho-structural and luminescent characteristics of garnet type phosphor. All YAG:RE phosphors are well crystallized powders containing a cubic-Y3 Al5 O12 phase as major component along with monoclinic-Y4 Al2 O9 and orthorhombic-YAlO3 phases as the impurity. The crystallites dimensions of YAG:RE phosphors vary between 38 nm and 88 nm, while the unit cell slowly increase as the ionic radius of the activator increases. Under UV excitation, YAG:Ce exhibits yellow emission due to electron transition in Ce(3+) from the 5d level to the ground state levels ((2) F5/2 , (2) F7/2 ). The emission intensity of Ce(3+) is enhanced in the presence of the Tb(3+) ions and is decreased in the presence of Eu(3+) ions due to some radiative or non-radiative processes that take place between activator ions. By varying the rare earth ions, the emission colour can be modulated from green to white and red. Copyright © 2015 John Wiley & Sons, Ltd. PMID:26553167

  14. Heat capacities, order-disorder transitions, and thermodynamic properties of rare-earth orthoferrites and rare-earth iron garnets

    SciTech Connect

    Parida, S.C. Rakshit, S.K.; Singh, Ziley

    2008-01-15

    Rare-earth orthoferrites, RFeO{sub 3}, and rare-earth iron garnets (RIGs) R{sub 3}Fe{sub 5}O{sub 12} (R=rare-earth elements) were prepared by citrate-nitrate gel combustion method and characterized by X-ray diffraction method. Isobaric molar heat capacities of these oxides were determined by using differential scanning calorimetry from 130 to 860 K. Order-disorder transition temperatures were determined from the heat capacity measurements. The Neel temperatures (T{sub N}) due to antiferromagentic to paramagnetic transitions in orthoferrites and the Curie temperatures (T{sub C}) due to ferrimagnetic to paramagnetic transitions in garnets were determined from the heat capacity data. Both T{sub N} and T{sub C} systematically decrease with increasing atomic number of R across the series. Lattice, electronic and magnetic contributions to the total heat capacity were calculated. Debye temperatures as a function of absolute temperature were calculated for these compounds. Thermodynamic functions like C{sub p,m}{sup o}, S{sub m}{sup o}, H{sup o}, G{sup o}, (H{sub T}{sup o}-H{sub 0}{sup o}), (H{sub T}{sup o}-H{sub 298.15K}{sup o}), -(G{sub T}{sup o}-H{sub 298.15K}{sup o})/T, {delta}{sub f}H{sub m}{sup o}, and {delta}{sub f}G{sub m}{sup o} have been generated for the compounds RFeO{sub 3}(s) and R{sub 3}Fe{sub 5}O{sub 12}(s) based on the experimental data obtained in this study and the available data in the literature. - Graphical abstract: Plot of molar heat capacities (C{sub p,m}{sup o}) of R{sub 3}Fe{sub 5}O{sub 12}(s) (R=Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) against temperature (T). The inset shows the magnified portion of the heat capacity plot near the transition region indicating nearly same values of Curie temperatures for different R{sub 3}Fe{sub 5}O{sub 12}(s)

  15. Magnetic properties of oxide glasses containing iron and rare-earth ions

    NASA Astrophysics Data System (ADS)

    Akamatsu, Hirofumi; Kawabata, Jun; Fujita, Koji; Murai, Shunsuke; Tanaka, Katsuhisa

    2011-10-01

    Measurements of fundamental magnetic properties including not only dc and ac susceptibilities but also magnetic aging effects have been performed for aluminoborate glasses with high concentrations of iron and rare-earth R3+ ions (R=Sm, Gd, and Tb) in order to give an insight into the magnetic structures and interactions in amorphous oxides containing both 3d transition metal and 4f rare-earth ions, which manifest magnetic interactions that differ from each other. We demonstrate that the antiferromagnetic interactions between iron and rare-earth ions as well as those between iron ions play a significant role for their magnetic properties, while those between rare-earth ions are of little importance. Most of the rare-earth ions remain paramagnetic even below the spin-freezing temperatures under the strong molecular field caused by the spin-glass freezing of the iron ions, as in the case of rare-earth garnet ferrites.

  16. Light emission from rare-earths in dislocation engineered silicon substrates

    NASA Astrophysics Data System (ADS)

    Lourenço, Manon A.; Ludurczak, Willy; Prins, Andrew D.; Milosavljević, Momir; Gwilliam, Russell M.; Homewood, Kevin P.

    2015-07-01

    We report and compare the luminescence, both photo- and electroluminescence, in the near-infrared of a wide range of rare earths (Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, and Tm) doped dislocation engineered silicon light emitting devices. The rare earths are introduced using ion implantation into standard Czochralski (CZ) n-type silicon wafers pre-implanted with boron to form both the p-n junction and an engineered dislocation loop array. Rare earth internal transitions are observed in samples co-doped with Dy, Ho, Er, and Tm. We show that for each rare earth optimizing the optical activity depends critically on the rare earth implant parameters and post-implant process conditions. Room temperature operation in the 1.5 and 2.0 µm spectral regions is observed from the internal rare earth transitions in Er and Tm.

  17. Molecular rare-earth-metal hydrides in non-cyclopentadienyl environments.

    PubMed

    Fegler, Waldemar; Venugopal, Ajay; Kramer, Mathias; Okuda, Jun

    2015-02-01

    Molecular hydrides of the rare-earth metals play an important role as homogeneous catalysts and as counterparts of solid-state interstitial hydrides. Structurally well-characterized non-metallocene-type hydride complexes allow the study of elementary reactions that occur at rare-earth-metal centers and of catalytic reactions involving bonds between rare-earth metals and hydrides. In addition to neutral hydrides, cationic derivatives have now become available. PMID:25413985

  18. Metal sulfide and rare-earth phosphate nanostructures and methods of making same

    DOEpatents

    Wong, Stanislaus; Zhang, Fen

    2016-06-28

    The present invention provides a method of producing a crystalline rare earth phosphate nanostructure. The method comprising: providing a rare earth metal precursor solution and providing a phosphate precursor solution; placing a porous membrane between the metal precursor solution and the phosphate precursor solution, wherein metal cations of the metal precursor solution and phosphate ions of the phosphate precursor solution react, thereby producing a crystalline rare earth metal phosphate nanostructure.

  19. Minerals yearbook, 1993: Rare earths, the lanthanides, yttrium, and scandium. Annual report

    SciTech Connect

    Hedrick, J.B.

    1995-03-01

    Domestic mine production of rare earths decreased in 1993. The domestic economy continued to recover slowly during the year and inflation rose a modest 2.5%. Estimated domestic apparent consumption decreased 21%; however, earnings by the major domestic processor reportedly increased amid a slight decline in sales. Demand increased for rare earths used in petroleum fluid cracking catalysts, automotive catalytic converters, permanent magnets, and television and lighting phosphors. Demand decreased for rare earths in automotive UV glass applications.

  20. Methods for preparation of nanocrystalline rare earth phosphates for lighting applications

    DOEpatents

    Comanzo, Holly Ann; Manoharan, Mohan; Martins Loureiro, Sergio Paulo; Setlur, Anant Achyut; Srivastava, Alok Mani

    2013-04-16

    Disclosed here are methods for the preparation of optionally activated nanocrystalline rare earth phosphates. The optionally activated nanocrystalline rare earth phosphates may be used as one or more of quantum-splitting phosphor, visible-light emitting phosphor, vacuum-UV absorbing phosphor, and UV-emitting phosphor. Also disclosed herein are discharge lamps comprising the optionally activated nanocrystalline rare earth phosphates provided by these methods.

  1. Physical and electrochemical properties of alkaline earth doped, rare earth vanadates

    SciTech Connect

    Adijanto, Lawrence; Balaji Padmanabhan, Venu; Holmes, Kevin J.; Gorte, Raymond J.; Vohs, John M.

    2012-06-15

    The effect of partial substitution of alkaline earth (AE) ions, Sr{sup 2+} and Ca{sup 2+}, for the rare earth (RE) ions, La{sup 3+}, Ce{sup 3+}, Pr{sup 3+}, and Sm{sup 3+}, on the physical properties of REVO{sub 4} compounds were investigated. The use of the Pechini method to synthesize the vanadates allowed for high levels of AE substitution to be obtained. Coulometric titration was used to measure redox isotherms for these materials and showed that the addition of the AE ions increased both reducibility and electronic conductivity under typical solid oxide fuel cell (SOFC) anode conditions, through the formation of compounds with mixed vanadium valence. In spite of their high electronic conductivity, REVO{sub 4}-yttira stabilized zirconia (YSZ) composite anodes exhibited only modest performance when used in SOFCs operating with H{sub 2} fuel at 973 K due to their low catalytic activity. High performance was obtained, however, after the addition of a small amount of catalytically active Pd to the anode. - Graphical abstract: Coulometric titration isotherms for ({open_square}) LaVO{sub 4}, ( White-Circle ) PrVO{sub 4}, ( Lozenge ) CeVO{sub 4}, ( Black-Up-Pointing-Triangle ) Ce{sub 0.7}Sr{sub 0.3}VO{sub 3.85}, and ( Black-Square ) Ce{sub 0.7}Ca{sub 0.3}VO{sub 3.85}, at 973 K. Highlights: Black-Right-Pointing-Pointer Infiltration procedures were used to prepare SOFC anodes from various vanadates. Black-Right-Pointing-Pointer Doping of Alkaline Earth to Rare Earth Vanadates showed to improve conductivity and chemical stability. Black-Right-Pointing-Pointer Alkaline Earth Doped Rare Earth Vanadates-YSZ composites showed conductivities as high as 5 S cm{sup -1} at 973 K. Black-Right-Pointing-Pointer As with other ceramic anodes, the addition of a catalyst was required to achieve low anode impedance.

  2. Rare-earth metal prices in the USA ca. 1960 to 1994

    USGS Publications Warehouse

    Hedrick, J.B.

    1997-01-01

    Rare-earth metal prices were compiled from the late 1950s and early 1960s through 1994. Although commercial demand for rare-earth metals began in 1908, as the alloy mischmetal, commercial quantities of a wide range of individual rare-earth metals were not available until the late 1950s. The discovery of a large, high-grade rare-earth deposit at Mountain Pass, CA, USA, in 1949, was significant because it led to the production of commercial quantities of rare-earth elements that reduced prices and encouraged wider application of the materials. The availability of ore from Mountain Pass, and other large rare-earth deposits, especially those in Australia and China, has provided the world with abundant resources for rare-earth metal production. This availability, coupled with improved technology from Government and private-sector metallurgical research, has resulted in substantial decreases in rare-earth metal prices since the late 1950s and early 1960s. Price series for the individual rare-earth metals (except promethium) are quoted on a kilogram basis from the late 1950s and early 1960s through 1994. Prices are given in US dollars on an actual and constant dollar basis. Industrial and economic factors affecting prices during this time period are examined.

  3. Rare-earth metal prices in the USA ca. 1960 to 1994

    USGS Publications Warehouse

    Hedrick, James B.

    1997-01-01

    Rare-earth metal prices were compiled from the late 1950s and early 1960s through 1994. Although commercial demand for rare-earth metals began in 1908, as the alloy mischmetal, commercial quantities of a wide range of individual rare-earth metals were not available until the late 1950s. The discovery of a large, high-grade rare-earth deposit at Mountain Pass. CA, USA, in 1949, was significant because it led to the production of commercial quantities or rare-earth elements that reduced prices and encouraged wider application of the materials. The availability of ore from Mountain Pass, and other large rare-earth deposits, especially those in Australia and China, has provided the world with abundant resources for rare-earth metal production. This availability, coupled with improved technology from Government and private-sector metallurgical research, has resulted in substantial decreases in rare-earth metal prices since the late 1950s and early 1960s. Price series for the individual rare-earth metals (except promethium) are quoted on a kilogram basis from the late 1950s and early 1960s through 1994. Prices are given in US dollars on an actual and constant dollar basis. Industrial and economic factors affecting prices during this time period are examined.

  4. Superconductivity achieved at over liquid nitrogen temperature by (mixed rare earths)-Ba-Cu oxides

    NASA Astrophysics Data System (ADS)

    Kishio, Kohji; Kuwahara, Kazuyuki; Kitazawa, Koichi; Fueki, Kazuo; Nakamura, Osamu

    1987-05-01

    Superconducting oxides were fabricated by reaction of powders of BaCO3, CuO and mixed rare earth (RE) carbonates at compositions expressed as (RE)1Ba2Cu3O(9-y). Two types of incompletely separated raw materials of mixed rare earths, namely, heavy rare earths (HRE) and medium rare earths (MRE), were examined. The zero-resistivity critical temperatures were observed at 92.5 K for the (HRE)-Ba-Cu-O and 85.0 K for the (MRE)-Ba-Cu-O systems, respectively, both of which were well above the boiling point of liquid nitrogen.

  5. Monolithically integrated active waveguides and lasers using rare-earth doped spin-on glass

    SciTech Connect

    Ashby, C.I.H.; Sullivan, C.T.; Vawter, G.A.

    1996-09-01

    This LDRD program No. 3505.230 explored a new approach to monolithic integration of active waveguides and rare-earth solid state lasers directly onto III-V substrates. It involved selectively incorporating rare-earth ions into spin-on glasses (SOGs) that could be solvent cast and then patterned with conventional microelectronic processing. The patterned, rare-earth spin-on glasses (RESOGs) were to be photopumped by laser diodes prefabricated on the wafer and would serve as directly integrated active waveguides and/or rare-earth solid state lasers.

  6. Calculation of binary phase diagrams between the actinide elements, rare earth elements, and transition metal elements

    SciTech Connect

    Selle, J E

    1992-06-26

    Attempts were made to apply the Kaufman method of calculating binary phase diagrams to the calculation of binary phase diagrams between the rare earths, actinides, and the refractory transition metals. Difficulties were encountered in applying the method to the rare earths and actinides, and modifications were necessary to provide accurate representation of known diagrams. To calculate the interaction parameters for rare earth-rare earth diagrams, it was necessary to use the atomic volumes for each of the phases: liquid, body-centered cubic, hexagonal close-packed, and face-centered cubic. Determination of the atomic volumes of each of these phases for each element is discussed in detail. In some cases, empirical means were necessary. Results are presented on the calculation of rare earth-rare earth, rare earth-actinide, and actinide-actinide diagrams. For rare earth-refractory transition metal diagrams and actinide-refractory transition metal diagrams, empirical means were required to develop values for the enthalpy of vaporization for rare earth elements and values for the constant (C) required when intermediate phases are present. Results of using the values determined for each element are presented.

  7. Combinatorial investigation of rare-earth free permanent magnets

    NASA Astrophysics Data System (ADS)

    Fackler, Sean Wu

    The combinatorial high throughput method allows one to rapidly study a large number of samples with systematically changing parameters. We apply this method to study Fe-Co-V alloys as alternatives to rare-earth permanent magnets. Rare-earth permanent magnets derive their unmatched magnetic properties from the hybridization of Fe and Co with the f-orbitals of rare-earth elements, which have strong spin-orbit coupling. It is predicted that Fe and Co may also have strong hybridization with 4d and 5d refractory transition metals with strong spin-orbit coupling. Refractory transition metals like V also have the desirable property of high temperature stability, which is important for permanent magnet applications in traction motors. In this work, we focus on the role of crystal structure, composition, and secondary phases in the origin of competitive permanent magnetic properties of a particular Fe-Co-V alloy. Fe38Co52V10, compositions are known as Vicalloys. Fe-CoV composition spreads were sputtered onto three-inch silicon wafers and patterned into discrete sample pads forming a combinatorial library. We employed highthroughput screening methods using synchrotron X-rays, wavelength dispersive spectroscopy, and magneto-optical Kerr effect (MOKE) to rapidly screen crystal structure, composition, and magnetic properties, respectively. We found that in-plane magnetic coercive fields of our Vicalloy thin films agree with known bulk values (300 G), but found a remarkable eight times increase of the out-of-plane coercive fields (˜2,500 G). To explain this, we measured the switching fields between in-plane and out-of-plane thin film directions which revealed that the Kondorsky model of 180° domain wall reversal was responsible for Vicalloy's enhanced out-of-plane coercive field and possibly its permanent magnetic properties. The Kondorsky model suggests that domain-wall pinning is the origin of Vicalloy's permanent magnetic properties, in contrast to strain, shape, or

  8. Rare earth elements exploitation, geopolitical implications and raw materials trading

    NASA Astrophysics Data System (ADS)

    Chemin, Marie-Charlotte

    2015-04-01

    Rare earth elements (REE) correspond to seventeen elements of the periodic table. They are used in high technology, cracking, electric cars' magnet, metal alloy for batteries, and also in phone construction or ceramics for electronic card. REEs are an important resource for high technology. This project targets 16 years old students in the subject "personalized aid" and will last six weeks. The purpose of this project is to develop autonomy and research in groups for a transdisciplinary work. This project gathers knowledge in geology, geography and economics. During the first session students analyze the geology applications of the REE. They begin the analysis with learning the composition in different rocks such as basalt and diorite to make the link with crystallization. Then they compare it with adakite to understand the formation of these rocks. In the second session, they study REE exploitation. We can find them as oxides in many deposits. The principal concentrations of rare earth elements are associated with uncommon varieties of igneous rocks, such as carbonatites. They can use Qgis, to localize this high concentration. In the third session, they study the environmental costs of REE exploitation. Indeed, the exploitation produces thorium and carcinogenic toxins: sulphates, ammonia and hydrochloric acid. Processing one ton of rare earths produces 2,000 tons of toxic waste. This session focuses, first, on Baotou's region, and then on an example they are free to choose. In the fourth session, they study the geopolitical issues of REE with a focus on China. In fact this country is the largest producer of REE, and is providing 95% of the overall production. REE in China are at the center of a geopolitical strategy. In fact, China implements a sort of protectionism. Indeed, the export tax on REE is very high so, as a foreign company, it is financially attractive to establish a manufacturing subsidiary in China in order to use REE. As a matter of fact

  9. Energetics of Rare Earth Doped Uranium Oxide Solid Solutions

    NASA Astrophysics Data System (ADS)

    Zhang, Lei

    The physical and chemical properties of UO2 nuclear fuels are affected as fission products accumulate during irradiation. The lanthanides, a main group of fission products, form extensive solid solutions with uranium oxide in the fluorite structure. Thermodynamic studies of such solid solutions had been performed to obtain partial molar free energies of oxygen as a function of dopant concentration and temperature; however, direct measurement of formation enthalpies was hampered by the refractory nature of these oxides. In this work, high temperature oxide melt solution calorimetry was utilized to study the thermochemistry of various rare earth doped uranium oxide LnxU 1-xO2-0.5x+y (Ln = La, Y, Nd) over a wide range of dopant concentrations and oxygen contents. The sintered solid solutions were carefully characterized to determine their phase purity, chemical composition, and uranium oxidation state, with most of the materials in the oxygen excess regime. The enthalpies of formation of LnxU1-xO2-0.5x+y were calculated from the calorimetric data. The oxidation enthalpies of these solid solutions are similar to that of UO2. The formation enthalpies from constituent oxides (LnO1.5, UO2, and UO3) become increasingly negative with addition of dopant cations and appear relatively independent of the uranium oxidation state (oxygen content) when the type and concentration of the dopants are the same. This is valid in the oxygen excess regime; thus an estimation of formation enthalpies of LnxU1-xO2 materials can be made. The formation enthalpies from elements of hyperstoichiometric LnxU1-xO 2-0.5x+y materials obtained from calorimetric measurements are in good agreement with those calculated from free energy data. A direct comparison between the formation enthalpies from calorimetric study and computational research using density functional theory was also performed. The experimental and computational energies of LnxU 1-xO2 (Ln = La, Y, Nd) generally agree within 10 k

  10. Magneto-structural correlations in rare-earth cobalt pnictides

    NASA Astrophysics Data System (ADS)

    Thompson, Corey Mitchell

    Magnetic materials are used in many applications such as credit cards, hard drives, electric motors, sensors, etc. Although a vast range of magnetic solids is available for these purposes, our ability to improve their efficiency and discover new materials remains paramount to the sustainable progress and economic profitability in many technological areas. The search for magnetic solids with improved performance requires fundamental understanding of correlations between the structural, electronic, and magnetic properties of existing materials, as well as active exploratory synthesis that targets the development of new magnets. Some of the strongest permanent magnets, Nd 2Fe14B, SmCo5, and Sm2Co17, combine transition and rare-earth metals, benefiting from the strong exchange between the 4f and 3d magnetic sublattices. Although these materials have been studied in great detail, the development of novel magnets requires thorough investigation of other 3d-4 f intermetallics, in order to gain further insights into correlations between their crystal structures and magnetic properties. Among many types of intermetallic materials, ternary pnictides RCo 2Pn2 (R = La, Ce, Pr, Nd; Pn = P, As) are of interest because, despite their simple crystal structures, they contain two magnetic sublattices, exchange interactions between which may lead to rich and unprecedented magnetic behavior. Nevertheless, magnetism of these materials was studied only to a limited extent, especially as compared to the extensive studies of their silicide and germanide analogues. The ThCr2Si2 structure type, to which these ternary pnictides belong, is one of the most ubiquitous atomic arrangements encountered among intermetallic compounds. It accounts for over 1000 known intermetallics and has received increased attention due to the recently discovered FeAs-based superconductors. This dissertation is devoted to the investigation of

  11. Promising wastewater treatment using rare earth-doped nanoferrites

    NASA Astrophysics Data System (ADS)

    Ahmed, M. A.; Bishay, Samiha T.; Khafagy, Rasha M.; Saleh, N. M.

    2014-01-01

    Single-phases of the spinel nanoferrites Zn0.5Co0.5Al0.5R0.04Fe1.46O4; R=Sm, Pr, Ce and La, were synthesized using the flash auto combustion method. X-ray diffraction (XRD) results indicated that doping nanoferrites with small concentrations of rare earth elements (RE) allowed their entrance to the spinel lattice. Transmission electron microscope (TEM) images revealed that doping with different RE elements resulted in the formation of different nanometric shapes such as nanospheres and nanowires. Doping with Sm3+ and Ce3+ resulted in the formation of nanospheres with average diameter of 14 and 30 nm respectively. In addition to the granular nanospheres, doping with Pr3+ and La3+ resulted in the formation of some nanowires with different aspect ratios (average length of ≈100 nm and diameter of ≈9 nm) and (average length of ≈150 nm and outer diameter of ≈22 nm) respectively. At fixed temperature, the Ac conductivity (σ) increased as the RE ionic radius increases except for Ce, due to the role of valance fluctuation from Ce3+ to Ce4+ ions. La- and Pr-doped nanoferrites showed the highest ac conductivity values, which is most probably due to the presence of large numbers of nanowires in these two types of ferrites. For all entire samples, the effective magnetic moment (μeff) decreased, while the Curie temperature (TC) increased as the RE ionic radius increases. The synthesized rare earth nanoferrites showed promising results in purifying colored wastewater. La-doped ferrite was capable for up-taking 92% of the dye content, followed by Pr-doped ferrite, which adsorbed 85% of the dye, while Sm- and Ce-doped ferrites showed lower dye removal efficiency of 80% and 72% respectively. High dye uptake shown by La- and Pr-doped ferrites is most probably due to the presence of nanowires and their higher Ac conductivity values. These excellent results were not previously reported.

  12. Effects of simulated rare earth recycling wastewaters on biological nitrification

    SciTech Connect

    Fujita, Yoshiko; Barnes, Joni; Eslamimanesh, Ali; Lencka, Malgorzata M.; Anderko, Andrzej; Riman, Richard E.; Navrotsky, Alexandra

    2015-07-16

    Current efforts to increase domestic availability of rare-earth element (REE) supplies by recycling and expanded ore processing efforts will result in increased generation of associated wastewaters. In some cases disposal to a sewage treatment plant may be favored but plant performance must be maintained. To assess the potential effects of such wastewaters on biological wastewater treatment, model nitrifying organisms Nitrosomonas europaea and Nitrobacter winogradskyi were exposed to simulated wastewaters containing varying levels of yttrium or europium (10, 50 and 100 ppm), and the REE extractant tributyl phosphate (TBP, at 0.1 g/L). Y and Eu additions above 10 ppm inhibited N. europaea activity, even when initially virtually all of the REE was insoluble. The provision of TBP together with Eu increased inhibition of nitrite production by the N. europaea, although TBP alone did not substantially alter nitrifying activity N. winogradskyi was more sensitive to the stimulated wastewaters, with even 10 ppm Eu or Y inducing significant inhibition, and a complete shutdown of nitrifying activity occurred in the presence of the TBP. To analyze the availability of REEs in aqueous solutions, REE solubility has been calculated using the previously developed MSE (Mixed-Solvent Electrolyte) thermodynamic model. The model calculations reveal a strong pH dependence of solubility, which is typically controlled by the precipitation of REE hydroxides but may also be influenced by the formation of a phosphate phase.

  13. A novel sequential process for remediating rare-earth wastewater.

    PubMed

    Cui, Mingcan; Jang, Min; Kang, Kyounglim; Kim, Dukmin; Snyder, Shane A; Khim, Jeehyeong

    2016-02-01

    A novel and economic sequential process consisting of precipitation, adsorption, and oxidation was developed to remediate actual rare-earth (RE) wastewater containing various toxic pollutants, including radioactive species. In the precipitation step, porous air stones (PAS) containing waste oyster shell (WOS), PASWOS, was prepared and used to precipitate most heavy metals with >97% removal efficiencies. The SEM-EDS analysis revealed that PAS plays a key role in preventing the surface coating of precipitants on the surface of WOS and in releasing the dissolved species of WOS successively. For the adsorption step, a polyurethane (PU) impregnated by coal mine drainage sludge (CMDS), PUCMDS, was synthesized and applied to deplete fluoride (F), arsenic (As), uranium (U), and thorium (Th) that remained after precipitation. The continuous-mode sequential process using PAS(WOS), PU(CMDS), and ozone (O3) had 99.9-100% removal efficiencies of heavy metals, 99.3-99.9% of F and As, 95.8-99.4% of U and Th, and 92.4% of COD(Cr) for 100 days. The sequential process can treat RE wastewater economically and effectively without stirred-tank reactors, pH controller, continuous injection of chemicals, and significant sludge generation, as well as the quality of the outlet met the EPA recommended limits. PMID:26583290

  14. Molecular Polyarsenides of the Rare-Earth Elements.

    PubMed

    Arleth, Nicholas; Gamer, Michael T; Köppe, Ralf; Konchenko, Sergey N; Fleischmann, Martin; Scheer, Manfred; Roesky, Peter W

    2016-01-22

    Reduction of [Cp*Fe(η(5)-As5)] with [Cp''2Sm(thf)] (Cp''=η(5)-1,3-(tBu)2C5H3) under various conditions led to [(Cp''2Sm)(μ,η(4):η(4)-As4)(Cp*Fe)] and [(Cp''2Sm)2As7(Cp*Fe)]. Both compounds are the first polyarsenides of the rare-earth metals. [(Cp''2Sm)(μ,η(4):η(4)-As4)(Cp*Fe)] is also the first d/f-triple decker sandwich complex with a purely inorganic planar middle deck. The central As4(2-) unit is isolobal with the 6π-aromatic cyclobutadiene dianion (CH)4(2-). [(Cp''2Sm)2As7(Cp*Fe)] contains an As7(3-) cage, which has a norbornadiene-like structure with two short As-As bonds in the scaffold. DFT calculations confirm all the structural observations. The As-As bond order inside the cyclo As4 ligand in [(Cp''2Sm)(μ,η(4):η(4)-As4)(Cp*Fe)] was estimated to be in between an As-As single bond and a formally aromatic As4(2-) system. PMID:26676537

  15. Artificially produced rare-earth free cosmic magnet

    PubMed Central

    Makino, Akihiro; Sharma, Parmanand; Sato, Kazuhisa; Takeuchi, Akira; Zhang, Yan; Takenaka, Kana

    2015-01-01

    Chemically ordered hard magnetic L10-FeNi phase of higher grade than cosmic meteorites is produced artificially. Present alloy design shortens the formation time from hundreds of millions of years for natural meteorites to less than 300 hours. Electron diffraction detects four-fold 110 superlattice reflections and a high chemical order parameter (S  0.8) for the developed L10-FeNi phase. The magnetic field of more than 3.5 kOe is required for the switching of magnetization. Experimental results along with computer simulation suggest that the ordered phase is formed due to three factors related to the amorphous state: high diffusion rates of the constituent elements at lower temperatures when crystallizing, a large driving force for precipitation of the L10 phase, and the possible presence of L10 clusters. Present results can resolve mineral exhaustion issues in the development of next-generation hard magnetic materials because the alloys are free from rare-earth elements, and the technique is well suited for mass production. PMID:26567704

  16. Spin voltage generation across rare earth spin filter barriers

    NASA Astrophysics Data System (ADS)

    Miao, Guoxing; Chang, Joonyeon; Moodera, Jagadeesh

    2011-03-01

    When a metal is in close contact with a rare-earth based magnetic compound, strong exchange interaction exists between the localized 4f electrons and the free moving conduction electrons. One important consequence is that the spin degeneracy among the conduction electrons is lifted, showing up as an effective Zeeman splitting higher than tens of Tesla in low dimensional systems such as graphene and other 2DEG. We perform our work using a vertical transport geometry, which consists of double spin filtering barriers based on a ferromagnetic Eu chalcogenide - EuS. A thin Al metallic layer is sandwiched in the middle and its conduction electrons thus experience the strong spin splitting, which is subsequently detected via the spin filtering effect. A spontaneous spin dependent voltage appears across such a device, and its polarity is directly determined by the EuS/Al interface. The voltage level difference between the spin-parallel and -antiparallel configurations is as large as a few mV. Such spin splitting also induces a clear universal behavior in the observed TMR bias dependence. Such spin voltage effect offers a possibility of directly converting magnetic exchange energy into electrical power. This work is supported by NSF DMR 0504158, ONR N00014-06-1-0235, and KIST-MIT project funds.

  17. Material and Energy Requirement for Rare Earth Production

    NASA Astrophysics Data System (ADS)

    Talens Peiró, Laura; Villalba Méndez, Gara

    2013-10-01

    The use of rare earth metals (REMs) for new applications in renewable and communication technologies has increased concern about future supply as well as environmental burdens associated with the extraction, use, and disposal (losses) of these metals. Although there are several reports describing and quantifying the production and use of REM, there is still a lack of quantitative data about the material and energy requirements for their extraction and refining. Such information remains difficult to acquire as China is still supplying over 95% of the world REM supply. This article attempts to estimate the material and energy requirements for the production of REM based on the theoretical chemical reactions and thermodynamics. The results show the material and energy requirement varies greatly depending on the type of mineral ore, production facility, and beneficiation process selected. They also show that the greatest loss occurs during mining (25-50%) and beneficiation (10-30%) of RE minerals. We hope that the material and energy balances presented in this article will be of use in life cycle analysis, resource accounting, and other industrial ecology tools used to quantify the environmental consequences of meeting REM demand for new technology products.

  18. Oxidation Effects in Rare Earth Doped Topological Insulator Thin Films.

    PubMed

    Figueroa, A I; van der Laan, G; Harrison, S E; Cibin, G; Hesjedal, T

    2016-01-01

    The breaking of time-reversal symmetry (TRS) in topological insulators is a prerequisite for unlocking their exotic properties and for observing the quantum anomalous Hall effect (QAHE). The incorporation of dopants which exhibit magnetic long-range order is the most promising approach for TRS-breaking. REBiTe3, wherein 50% of the Bi is substitutionally replaced by a RE atom (RE = Gd, Dy, and Ho), is a predicted QAHE system. Despite the low solubility of REs in bulk crystals of a few %, highly doped thin films have been demonstrated, which are free of secondary phases and of high crystalline quality. Here we study the effects of exposure to atmosphere of rare earth-doped Bi2(Se, Te)3 thin films using x-ray absorption spectroscopy. We demonstrate that these RE dopants are all trivalent and effectively substitute for Bi(3+) in the Bi2(Se, Te)3 matrix. We find an unexpected high degree of sample oxidation for the most highly doped samples, which is not restricted to the surface of the films. In the low-doping limit, the RE-doped films mostly show surface oxidation, which can be prevented by surface passivation, encapsulation, or in-situ cleaving to recover the topological surface state. PMID:26956771

  19. Effect of rare earth substitution in cobalt ferrite bulk materials

    NASA Astrophysics Data System (ADS)

    Bulai, G.; Diamandescu, L.; Dumitru, I.; Gurlui, S.; Feder, M.; Caltun, O. F.

    2015-09-01

    The study was focused on the influence of small amounts of rare earth (RE=La, Ce, Sm, Gd, Dy, Ho, Er, Yb) addition on the microstructure, phase content and magnetic properties of cobalt ferrite bulk materials. The X-Ray diffraction measurements confirmed the formation of the spinel structure but also the presence of secondary phases of RE oxides or orthoferrite in small percentages (up to 3%). Density measurements obtained by Archimedes method revealed a ~1 g cm-3 decrease for the RE doped cobalt ferrite samples compared with stoichiometric one. Both the Mössbauer and Fourier Transform Infrared Spectrocopy analysis results confirmed the formation of the spinel phase. The saturation magnetization and coercive field values of the doped samples obtained by Vibrating Sample Magnetometry were close to those of the pure cobalt ferrite. For magnetostrictive property studies the samples were analyzed using the strain gauge method. Higher maximum magnetostriction coefficients were found for the Ho, Ce, Sm and Yb doped cobalt ferrite bulk materials as related to the stoichiometric CoFe2O4 sample. Moreover, improved strain derivative was observed for these samples but at higher magnetic fields due to the low increase of the coercive field values for doped samples.

  20. Sensing Using Rare-Earth-Doped Upconversion Nanoparticles

    PubMed Central

    Hao, Shuwei; Chen, Guanying; Yang, Chunhui

    2013-01-01

    Optical sensing plays an important role in theranostics due to its capability to detect hint biochemical entities or molecular targets as well as to precisely monitor specific fundamental psychological processes. Rare-earth (RE) doped upconversion nanoparticles (UCNPs) are promising for these endeavors due to their unique frequency converting capability; they emit efficient and sharp visible or ultraviolet (UV) luminescence via use of ladder-like energy levels of RE ions when excited at near infrared (NIR) light that are silent to tissues. These features allow not only a high penetration depth in biological tissues but also a high detection sensitivity. Indeed, the energy transfer between UCNPs and biomolecular or chemical indicators provide opportunities for high-sensitive bio- and chemical-sensing. A temperature-sensitive change of the intensity ratio between two close UC bands promises them for use in temperature mapping of a single living cell. In this work, we review recent investigations on using UCNPs for the detection of biomolecules (avidin, ATP, etc.), ions (cyanide, mecury, etc.), small gas molecules (oxygen, carbon dioxide, ammonia, etc.), as well as for in vitro temperature sensing. We also briefly summarize chemical methods in synthesizing UCNPs of high efficiency that are important for the detection limit. PMID:23650480

  1. Synthesis, structure, and physical properties of new rare earth ferrocenoylacetonates.

    PubMed

    Koroteev, Pavel S; Dobrokhotova, Zhanna V; Ilyukhin, Andrey B; Efimov, Nikolay N; Rouzières, Mathieu; Kiskin, Mikhail A; Clérac, Rodolphe; Novotortsev, Vladimir M

    2016-04-21

    New ferrocenoylacetonate complexes of several rare earth elements, [Ln(fca)3(bpy)]·MeC6H5 (Ln = Pr (), Eu (), Gd (), Tb (), Dy (), Ho (), Y (); bpy - 2,2'-bipyridine; Hfca - FcCOCH2COMe) as well as scandium ferrocenoylacetonate [Sc(fca)3]·0.5MeC6H5 (), were synthesized and characterized by single crystal X-ray diffraction analysis. In the crystal lattice of the isostructural complexes , two [Ln(fca)3(bpy)] molecules form a pair due to stacking interactions between the bpy ligands. The Ln(3+) ions are coordinated in a square antiprism geometry with a coordination number of 8. The Sc(3+) ions in complex are coordinated in an octahedral geometry. Thermolysis of complexes was studied under air and argon atmospheres; in the first case, it affords perovskites LnFeO3 as one of the products. Complexes display single-molecule magnet properties, and the effective relaxation barrier for the Dy complex , was found to be Δeff/kB = 241 K, which is one of the highest values obtained for a mononuclear β-diketonate lanthanide complex. PMID:26948276

  2. Effects of simulated rare earth recycling wastewaters on biological nitrification

    DOE PAGESBeta

    Fujita, Yoshiko; Barnes, Joni; Eslamimanesh, Ali; Lencka, Malgorzata M.; Anderko, Andrzej; Riman, Richard E.; Navrotsky, Alexandra

    2015-07-16

    Current efforts to increase domestic availability of rare-earth element (REE) supplies by recycling and expanded ore processing efforts will result in increased generation of associated wastewaters. In some cases disposal to a sewage treatment plant may be favored but plant performance must be maintained. To assess the potential effects of such wastewaters on biological wastewater treatment, model nitrifying organisms Nitrosomonas europaea and Nitrobacter winogradskyi were exposed to simulated wastewaters containing varying levels of yttrium or europium (10, 50 and 100 ppm), and the REE extractant tributyl phosphate (TBP, at 0.1 g/L). Y and Eu additions above 10 ppm inhibited N.more » europaea activity, even when initially virtually all of the REE was insoluble. The provision of TBP together with Eu increased inhibition of nitrite production by the N. europaea, although TBP alone did not substantially alter nitrifying activity N. winogradskyi was more sensitive to the stimulated wastewaters, with even 10 ppm Eu or Y inducing significant inhibition, and a complete shutdown of nitrifying activity occurred in the presence of the TBP. To analyze the availability of REEs in aqueous solutions, REE solubility has been calculated using the previously developed MSE (Mixed-Solvent Electrolyte) thermodynamic model. The model calculations reveal a strong pH dependence of solubility, which is typically controlled by the precipitation of REE hydroxides but may also be influenced by the formation of a phosphate phase.« less

  3. Reducing the detection limits of rare earth elements in steels

    SciTech Connect

    Raskevich, V.K.; Maiboroda, I.K.; Frishberg, A.A.; Panfilova, S.Ya.

    1986-12-01

    Chemical and chemicospectral analysis methods make it possible to determine rare-earth elements (REE) reliably in steels, but they are time-consuming and laborious. X-ray fluorescence methods are also characterized by the complicated procedure of preparing standard and production specimens for analysis. In this paper, the authors attempt to develop a spectrographic method of determining the REEs in the steel using standard equipment. The authors prepare synthetic standard specimens for determining Ce, Nd, La, Pr, and Y in steels of various grades by adding titrated solutions of the salts of the determined elements to the powder of the steel without REE with subsequent evaporation, drying, and mixing. The steels were ground by the mechanical method. On the basis of the resulting detection limits and analysis accuracy, the proposed method can be recommended for inspection of the technological process in melting steels and for preparation of standard specimens in the plant. The method is 5-7 times faster than the chemicospectral method.

  4. Pulsed field magnetization in rare-earth kagome systems

    NASA Astrophysics Data System (ADS)

    Hoch, M. J. R.; Zhou, H. D.; Mun, E.; Harrison, N.

    2016-02-01

    The rare-earth kagome systems R 3Ga5SiO14 (R  =  Nd or Pr) exhibit cooperative paramagnetism at low temperatures. Evidence for correlated spin clusters in these weakly frustrated systems has previously been obtained from neutron scattering and from ESR and NMR results. The present pulsed field (0-60 T, 25 ms) magnetization measurements made on single crystals of Nd3Ga5SiO14 (NGS) and Pr3Ga5SiO14 (PGS) at temperatures down to 450 mK have revealed striking differences in the magnetic responses of the two materials. For NGS the magnetization shows a low field plateau, saturation in high transient fields, and significant hysteresis while the PGS magnetization does not saturate in transient fields up to 60 T and shows no hysteresis or plateaus. Nd3+ is a Kramers ion while Pr3+ is a non-Kramers ion and the crystal field effects are quite different in the two systems. For the conditions used in the experiments the magnetization behavior is not in agreement with Heisenberg model predictions for kagome systems in which easy-axis anisotropy is much larger than the exchange coupling. The extremely slow spin dynamics found below 4 K in NGS is, however, consistent with the model for Kramers ions and provides a basis for explaining the pulsed field magnetization features.

  5. Magnetization of rare earth kagome systems in pulsed fields

    NASA Astrophysics Data System (ADS)

    Hoch, Michael; Mun, Eun; Harrison, Neil; Zhou, Haidong

    2014-03-01

    The rare earth kagome systems R3 Ga5 SiO14 (R = Nd or Pr) exhibit cooperative paramagnetism at low temperatures. Evidence for correlated spin clusters in these weakly frustrated systems has previously been obtained in neutron scattering experiments. The present pulsed field (0 - 60 T) low temperature magnetization measurements on single crystals of Nd3 Ga5 SiO14 (NGS) and Pr3 Ga5 SiO14 (PGS) have revealed striking differences in the magnetic responses of these two materials. At 1.6 K NGS shows a low field plateau, saturation of the magnetization for μ0 H > 10 T and significant hysteresis while the PGS magnetization does not saturate in fields up to 60 T and shows no hysteresis or plateaus. While Nd3+ (J = 9/2) is a Kramers ion Pr3+ (J = 4) is not. The exchange couplings J ~ 1 K are similar for PGS and NGS but the crystal field splittings and anisotropies are quite different. The marked contrast in the behavior of the two kagome systems is attributed to differences in the spin cluster structures and dynamics. The pulsed field approach has great potential for investigating kagome cluster dynamics at low temperatures.

  6. Rare earth doped upconverting particles for different photonic applications

    NASA Astrophysics Data System (ADS)

    Pokhrel, Madhab; Gangadharan, Ajith Kumar; Sardar, Dhiraj Kumar

    2013-03-01

    Trivalent rare earth ions especially erbium (Er3+) and ytterbium (Yb3+) co-doped in various host nanoparticles are known for their extraordinary spectroscopic properties. A thorough optical characterization including the absolute upconversion quantum yield (QY) measurement is of critical importance in evaluating their potential for various photonic applications. In this paper, we will be presenting a measured absolute upconversion QYs for Yb3+ and Er3+ doped in La2O2S under 980 and 1550 nm excitation at various power densities. Comparison of absolute QYs for different concentrations of Yb3+ and Er3+ doped in La2O2S will be made for all the upconversion emissions with respect to reported most efficient upconverting phosphor NaYF4 doped with 20% Yb3+ and 2% Er3+. Furthermore, applications of these phosphors in different areas such as bio-imaging, solar cell, security, etc. will be explored depending on the measured absolute upconversion quantum yields. In addition, preliminary results on in vitro imaging using upconverting nanoparticles as a contrast agent will be reported. This work was supported by the National Science Foundation Partnerships for Research and Education in Materials (PREM) Grant No. DMR-0934218.

  7. Review on dielectric properties of rare earth doped barium titanate

    NASA Astrophysics Data System (ADS)

    Ismail, Fatin Adila; Osman, Rozana Aina Maulat; Idris, Mohd Sobri

    2016-07-01

    Rare earth doped Barium Titanate (BaTiO3) were studied due to high permittivity, excellent electrical properties and have wide usage in various applications. This paper reviewed on the electrical properties of RE doped BaTiO3 (RE: Lanthanum (La), Erbium (Er), Samarium (Sm), Neodymium (Nd), Cerium (Ce)), processing method, phase transition occurred and solid solution range for complete study. Most of the RE doped BaTiO3 downshifted the Curie temperature (TC). Transition temperature also known as Curie temperature, TC where the ceramics had a transition from ferroelectric to a paraelectric phase. In this review, the dielectric constant of La-doped BaTiO3, Er-doped BaTiO3, Sm-doped BaTiO3, Nd-doped BaTiO3 and Ce-doped BaTiO3 had been proved to increase and the transition temperature or also known as TC also lowered down to room temperature as for all the RE doped BaTiO3 except for Er-doped BaTiO3.

  8. Rare-earth element based permanent magnets: a theoretical investigation

    NASA Astrophysics Data System (ADS)

    Chouhan, Rajiv K.; Paudyal, Durga

    Permanent magnetic materials with large magnetization and high magnetocrystalline anisotropy are important for technical applications. In this context rare-earth (R) element based materials are good candidates because of their localized 4 f electrons. The 4 f crystal field splitting provides large part of magnetic anisotropy depending upon the crystal environment. The d spin orbit coupling of alloyed transition metal component provides additional anisotropy. RCo5 and its derivative R2Co17 are known compounds for large magnetic anisotropy. Here we have performed electronic structure calculations to predict new materials in this class by employing site substitutions. In these investigations, we have performed density functional theory including on-site electron correlation (DFT +U) and L-S coupling calculations. The results show that the abundant Ce substitution in R sites and Ti/Zr substitutions in some of the Co sites help reduce criticality without substantially affecting the magnetic moment and magnetic anisotropy in these materials. This work is supported by the Critical Materials Institute, an Energy Innovation Hub funded by the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Manufacturing Office.

  9. Effects of Simulated Rare Earth Recycling Wastewaters on Biological Nitrification.

    PubMed

    Fujita, Yoshiko; Barnes, Joni; Eslamimanesh, Ali; Lencka, Malgorzata M; Anderko, Andrzej; Riman, Richard E; Navrotsky, Alexandra

    2015-08-18

    Increasing rare earth element (REE) supplies by recycling and expanded ore processing will result in generation of new wastewaters. In some cases, disposal to a sewage treatment plant may be favored, but plant performance must be maintained. To assess the potential effects of such wastewaters on biological treatment, model nitrifying organisms Nitrosomonas europaea and Nitrobacter winogradskyi were exposed to simulated wastewaters containing varying levels of yttrium or europium (10, 50, and 100 ppm), and the extractant tributyl phosphate (TBP, at 0.1 g/L). Y and Eu additions at 50 and 100 ppm inhibited N. europaea, even when virtually all of the REE was insoluble. Provision of TBP with Eu increased N. europaea inhibition, although TBP alone did not substantially alter activity. For N. winogradskyi cultures, Eu or Y additions at all tested levels induced significant inhibition, and nitrification shut down completely with TBP addition. REE solubility was calculated using the previously developed MSE (Mixed-Solvent Electrolyte) thermodynamic model. The model calculations reveal a strong pH dependence of solubility, typically controlled by the precipitation of REE hydroxides but also likely affected by the formation of unknown phosphate phases, which determined aqueous concentrations experienced by the microorganisms. PMID:26132866

  10. Pulsed field magnetization in rare-earth kagome systems.

    PubMed

    Hoch, M J R; Zhou, H D; Mun, E; Harrison, N

    2016-02-01

    The rare-earth kagome systems R 3Ga5SiO14 (R  =  Nd or Pr) exhibit cooperative paramagnetism at low temperatures. Evidence for correlated spin clusters in these weakly frustrated systems has previously been obtained from neutron scattering and from ESR and NMR results. The present pulsed field (0-60 T, 25 ms) magnetization measurements made on single crystals of Nd3Ga5SiO14 (NGS) and Pr3Ga5SiO14 (PGS) at temperatures down to 450 mK have revealed striking differences in the magnetic responses of the two materials. For NGS the magnetization shows a low field plateau, saturation in high transient fields, and significant hysteresis while the PGS magnetization does not saturate in transient fields up to 60 T and shows no hysteresis or plateaus. Nd(3+) is a Kramers ion while Pr(3+) is a non-Kramers ion and the crystal field effects are quite different in the two systems. For the conditions used in the experiments the magnetization behavior is not in agreement with Heisenberg model predictions for kagome systems in which easy-axis anisotropy is much larger than the exchange coupling. The extremely slow spin dynamics found below 4 K in NGS is, however, consistent with the model for Kramers ions and provides a basis for explaining the pulsed field magnetization features. PMID:26732305