Science.gov

Sample records for realistic vector-type confining

  1. Ab initio H2O in realistic hydrophilic confinement.

    PubMed

    Allolio, Christoph; Klameth, Felix; Vogel, Michael; Sebastiani, Daniel

    2014-12-15

    A protocol for the ab initio construction of a realistic cylindrical pore in amorphous silica, serving as a geometric nanoscale confinement for liquids and solutions, is presented. Upon filling the pore with liquid water at different densities, the structure and dynamics of the liquid inside the confinement can be characterized. At high density, the pore introduces long-range oscillations into the water density profile, which makes the water structure unlike that of the bulk across the entire pore. The tetrahedral structure of water is also affected up to the second solvation shell of the pore wall. Furthermore, the effects of the confinement on hydrogen bonding and diffusion, resulting in a weakening and distortion of the water structure at the pore walls and a slowdown in diffusion, are characterized. PMID:25208765

  2. Effects of angular confinement and concentration to realistic solar cells

    SciTech Connect

    Höhn, O. Kraus, T.; Bläsi, B.; Schwarz, U. T.

    2015-01-21

    In standard solar cells, light impinges under a very small angular range, whereas the solar cell emits light into the whole half space. Due to this expansion of etendué, entropy is generated, which limits the maximal efficiency of solar cells. This limit can be overcome by either increasing the angle of incidence by concentration or by decreasing the angle of emission by an angularly confining element or by a combination of both. In an ideal solar cell with radiative recombination as the only loss mechanism, angular confinement and concentration are thermodynamically equivalent. It is shown that concentration in a device, where non-radiative losses such as Shockley-Read-Hall and Auger recombination are considered, is not equivalent to angular confinement. As soon as non-radiative losses are considered, the gain in efficiency due to angular confinement drops significantly in contrast to the gain caused by concentration. With the help of detailed balance calculations, it is furthermore shown that angular confinement can help to increase the efficiency of solar cells under concentrated sunlight even if no measurable gain is expected for the solar cell under 1-sun-illumination. Our analysis predicts a relative gain of 3.14% relative in efficiency for a realistic solar cell with a concentration factor of 500.

  3. Modeling the Earth's magnetospheric magnetic field confined within a realistic magnetopause

    NASA Technical Reports Server (NTRS)

    Tsyganenko, N. A.

    1995-01-01

    Empirical data-based models of the magnetosphereic magnetic field have been widely used during recent years. However, the existing models (Tsyganenko, 1987, 1989a) have three serious deficiencies: (1) an unstable de facto magnetopause, (2) a crude parametrization by the K(sub p) index, and (3) inaccuracies in the equatorial magnetotail B(sub z) values. This paper describes a new approach to the problem; the essential new features are (1) a realistic shape and size of the magnetopause, based on fits to a large number of observed crossing (allowing a parametrization by the solar wind pressure), (2) fully controlled shielding of the magnetic field produced by all magnetospheric current systems, (3) new flexible representations for the tail and ring currents, and (4) a new directional criterion for fitting the model field to spacecraft data, providing improved accuracy for field line mapping. Results are presented from initial efforts to create models assembled from these modules and calibrated against spacecraft data sets.

  4. Modeling of the cross-beam energy transfer with realistic inertial-confinement-fusion beams in a large-scale hydrocode.

    PubMed

    Colaïtis, A; Duchateau, G; Ribeyre, X; Tikhonchuk, V

    2015-01-01

    A method for modeling realistic laser beams smoothed by kinoform phase plates is presented. The ray-based paraxial complex geometrical optics (PCGO) model with Gaussian thick rays allows one to create intensity variations, or pseudospeckles, that reproduce the beam envelope, contrast, and high-intensity statistics predicted by paraxial laser propagation codes. A steady-state cross-beam energy-transfer (CBET) model is implemented in a large-scale radiative hydrocode based on the PCGO model. It is used in conjunction with the realistic beam modeling technique to study the effects of CBET between coplanar laser beams on the target implosion. The pseudospeckle pattern imposed by PCGO produces modulations in the irradiation field and the shell implosion pressure. Cross-beam energy transfer between beams at 20(∘) and 40(∘) significantly degrades the irradiation symmetry by amplifying low-frequency modes and reducing the laser-capsule coupling efficiency, ultimately leading to large modulations of the shell areal density and lower convergence ratios. These results highlight the role of laser-plasma interaction and its influence on the implosion dynamics. PMID:25679718

  5. Vector-type four-quark interaction and its impact on QCD phase structure

    NASA Astrophysics Data System (ADS)

    Sakai, Yuji; Kashiwa, Kouji; Kouno, Hiroaki; Matsuzaki, Masayuki; Yahiro, Masanobu

    2008-10-01

    Effects of the vector-type four-quark interaction on QCD phase structure are investigated in the imaginary chemical potential (μ) region, by using the Polyakov-loop extended Nambu-Jona-Lasinio model with the extended Z3 symmetry. We clarify analytically the Roberge-Weiss periodicity and symmetry properties of various quantities under the existence of a vector-type four-quark interaction. In the imaginary μ region, the chiral condensate and the quark-number density are sensitive to the strength of the interaction. Based on this result, we propose a possibility to determine the strength of the vector-type interaction, which largely affects QCD phase structure in the real μ region, by comparing the results of lattice simulations and effective model calculations in the imaginary μ region.

  6. Vector-type four-quark interaction and its impact on QCD phase structure

    SciTech Connect

    Sakai, Yuji; Kashiwa, Kouji; Yahiro, Masanobu; Kouno, Hiroaki; Matsuzaki, Masayuki

    2008-10-01

    Effects of the vector-type four-quark interaction on QCD phase structure are investigated in the imaginary chemical potential ({mu}) region, by using the Polyakov-loop extended Nambu-Jona-Lasinio model with the extended Z{sub 3} symmetry. We clarify analytically the Roberge-Weiss periodicity and symmetry properties of various quantities under the existence of a vector-type four-quark interaction. In the imaginary {mu} region, the chiral condensate and the quark-number density are sensitive to the strength of the interaction. Based on this result, we propose a possibility to determine the strength of the vector-type interaction, which largely affects QCD phase structure in the real {mu} region, by comparing the results of lattice simulations and effective model calculations in the imaginary {mu} region.

  7. Classical confined particles

    NASA Technical Reports Server (NTRS)

    Horzela, Andrzej; Kapuscik, Edward

    1993-01-01

    An alternative picture of classical many body mechanics is proposed. In this picture particles possess individual kinematics but are deprived from individual dynamics. Dynamics exists only for the many particle system as a whole. The theory is complete and allows to determine the trajectories of each particle. It is proposed to use our picture as a classical prototype for a realistic theory of confined particles.

  8. Realistic Solar Surface Convection Simulations

    NASA Technical Reports Server (NTRS)

    Stein, Robert F.; Nordlund, Ake

    2000-01-01

    We perform essentially parameter free simulations with realistic physics of convection near the solar surface. We summarize the physics that is included and compare the simulation results with observations. Excellent agreement is obtained for the depth of the convection zone, the p-mode frequencies, the p-mode excitation rate, the distribution of the emergent continuum intensity, and the profiles of weak photospheric lines. We describe how solar convection is nonlocal. It is driven from a thin surface thermal boundary layer where radiative cooling produces low entropy gas which forms the cores of the downdrafts in which most of the buoyancy work occurs. We show that turbulence and vorticity are mostly confined to the intergranular lanes and underlying downdrafts. Finally, we illustrate our current work on magneto-convection.

  9. Realistic collective nuclear Hamiltonian

    SciTech Connect

    Dufour, M.; Zuker, A.P.

    1996-10-01

    The residual part of the realistic forces{emdash}obtained after extracting the monopole terms responsible for bulk properties{emdash}is strongly dominated by pairing and quadrupole interactions, with important {sigma}{tau}{center_dot}{sigma}{tau}, octupole, and hexadecapole contributions. Their forms retain the simplicity of the traditional pairing plus multipole models, while eliminating their flaws through a normalization mechanism dictated by a universal {ital A}{sup {minus}1/3} scaling. Coupling strengths and effective charges are calculated and shown to agree with empirical values. Comparisons between different realistic interactions confirm the claim that they are very similar. {copyright} {ital 1996 The American Physical Society.}

  10. Realistic and Schematic Visuals.

    ERIC Educational Resources Information Center

    Heuvelman, Ard

    1996-01-01

    A study examined three different visual formats (studio presenter only, realistic visuals, or schematic visuals) of an educational television program. Recognition and recall of the abstract subject matter were measured in 101 adult viewers directly after the program and 3 months later. The schematic version yielded better recall of the program,…

  11. A realistic lattice example

    SciTech Connect

    Courant, E.D.; Garren, A.A.

    1985-10-01

    A realistic, distributed interaction region (IR) lattice has been designed that includes new components discussed in the June 1985 lattice workshop. Unlike the test lattices, the lattice presented here includes utility straights and the mechanism for crossing the beams in the experimental straights. Moreover, both the phase trombones and the dispersion suppressors contain the same bending as the normal cells. Vertically separated beams and 6 Tesla, 1-in-1 magnets are assumed. Since the cells are 200 meters long, and have 60 degree phase advance, this lattice has been named RLD1, in analogy with the corresponding test lattice, TLD1. The quadrupole gradient is 136 tesla/meter in the cells, and has similar values in other quadrupoles except in those in the IR`s, where the maximum gradient is 245 tesla/meter. RLD1 has distributed IR`s; however, clustered realistic lattices can easily be assembled from the same components, as was recently done in a version that utilizes the same type of experimental and utility straights as those of RLD1.

  12. Can "realist" randomised controlled trials be genuinely realist?

    PubMed

    Van Belle, Sara; Wong, Geoff; Westhorp, Gill; Pearson, Mark; Emmel, Nick; Manzano, Ana; Marchal, Bruno

    2016-01-01

    In this paper, we respond to a paper by Jamal and colleagues published in Trials in October 2015 and take an opportunity to continue the much-needed debate about what applied scientific realism is. The paper by Jamal et al. is useful because it exposes the challenges of combining a realist evaluation approach (as developed by Pawson and Tilley) with the randomised controlled trial (RCT) design.We identified three fundamental differences that are related to paradigmatic differences in the treatment of causation between post-positivist and realist logic: (1) the construct of mechanism, (2) the relation between mediators and moderators on one hand and mechanisms and contexts on the other hand, and (3) the variable-oriented approach to analysis of causation versus the configurational approach.We show how Jamal et al. consider mechanisms as observable, external treatments and how their approach reduces complex causal processes to variables. We argue that their proposed RCT design cannot provide a truly realist understanding. Not only does the proposed realist RCT design not deal with the RCT's inherent inability to "unpack" complex interventions, it also does not enable the identification of the dynamic interplay among the intervention, actors, context, mechanisms and outcomes, which is at the core of realist research. As a result, the proposed realist RCT design is not, as we understand it, genuinely realist in nature. PMID:27387202

  13. Realist evaluation: an immanent critique.

    PubMed

    Porter, Sam

    2015-10-01

    This paper critically analyses realist evaluation, focussing on its primary analytical concepts: mechanisms, contexts, and outcomes. Noting that nursing investigators have had difficulty in operationalizing the concepts of mechanism and context, it is argued that their confusion is at least partially the result of ambiguities, inconsistencies, and contradictions in the realist evaluation model. Problematic issues include the adoption of empiricist and idealist positions, oscillation between determinism and voluntarism, subsumption of agency under structure, and categorical confusion between context and mechanism. In relation to outcomes, it is argued that realist evaluation's adoption of the fact/value distinction prevents it from taking into account the concerns of those affected by interventions. The aim of the paper is to use these immanent critiques of realist evaluation to construct an internally consistent realist approach to evaluation that is more amenable to being operationalized by nursing researchers. PMID:26392234

  14. Anderson localization for chemically realistic systems

    NASA Astrophysics Data System (ADS)

    Terletska, Hanna

    2015-03-01

    Disorder which is ubiquitous for most materials can strongly effect their properties. It may change their electronic structures or even cause their localization, known as Anderson localization. Although, substantial progress has been achieved in the description of the Anderson localization, a proper mean-field theory of this phenomenon for more realistic systems remains elusive. Commonly used theoretical methods such as the coherent potential approximation and its cluster extensions fail to describe the Anderson transition, as the average density of states (DOS) employed in such theories is not critical at the transition. However, near the transition, due to the spatial confinement of carriers, the local DOS becomes highly skewed with a log-normal distribution, for which the most probable and the typical values differ noticeably from the average value. Dobrosavljevic et.al., incorporated such ideas in their typical medium theory (TMT), and showed that the typical (not average) DOS is critical at the transition. While the TMT is able to capture the localized states, as a local single site theory it still has several drawbacks. For the disorder Anderson model in three dimension it underestimates the critical disorder strength, and fails to capture the re-entrance behavior of the mobility edge. We have recently developed a cluster extension of the TMT, which addresses these drawbacks by systematically incorporating non-local corrections. This approach converges quickly with cluster size and allows us to incorporate the effect of interactions and realistic electronic structure. As the first steps towards realistic material modeling, we extended our TMDCA formalisms to systems with the off diagonal disorder and multiple bands structures. We also applied our TMDCA scheme to systems with both disorder and interactions and found that correlations effects tend to stabilize the metallic behavior even in two dimensions. This work was supported by DOE SciDAC Grant No. DE-FC02

  15. Generating realistic images using Kray

    NASA Astrophysics Data System (ADS)

    Tanski, Grzegorz

    2004-07-01

    Kray is an application for creating realistic images. It is written in C++ programming language, has a text-based interface, solves global illumination problem using techniques such as radiosity, path tracing and photon mapping.

  16. RAMESES publication standards: realist syntheses

    PubMed Central

    2013-01-01

    Background There is growing interest in realist synthesis as an alternative systematic review method. This approach offers the potential to expand the knowledge base in policy-relevant areas - for example, by explaining the success, failure or mixed fortunes of complex interventions. No previous publication standards exist for reporting realist syntheses. This standard was developed as part of the RAMESES (Realist And MEta-narrative Evidence Syntheses: Evolving Standards) project. The project's aim is to produce preliminary publication standards for realist systematic reviews. Methods We (a) collated and summarized existing literature on the principles of good practice in realist syntheses; (b) considered the extent to which these principles had been followed by published syntheses, thereby identifying how rigor may be lost and how existing methods could be improved; (c) used a three-round online Delphi method with an interdisciplinary panel of national and international experts in evidence synthesis, realist research, policy and/or publishing to produce and iteratively refine a draft set of methodological steps and publication standards; (d) provided real-time support to ongoing realist syntheses and the open-access RAMESES online discussion list so as to capture problems and questions as they arose; and (e) synthesized expert input, evidence syntheses and real-time problem analysis into a definitive set of standards. Results We identified 35 published realist syntheses, provided real-time support to 9 on-going syntheses and captured questions raised in the RAMESES discussion list. Through analysis and discussion within the project team, we summarized the published literature and common questions and challenges into briefing materials for the Delphi panel, comprising 37 members. Within three rounds this panel had reached consensus on 19 key publication standards, with an overall response rate of 91%. Conclusion This project used multiple sources to develop and

  17. PREFACE: Water in confined geometries

    NASA Astrophysics Data System (ADS)

    Rovere, Mauro

    2004-11-01

    particularly important to understand whether the glass transition temperature could be experimentally accessible for confined water. In this respect the modifications induced by the confinement on the dynamics of water on supercooling are of extreme interest and a number of experimental and computer simulation studies have been devoted in recent years to this topic. This special section contains papers from different groups which have contributed with various experimental and computer simulation techniques to the progress made in the study of water in confined geometry. I thank all of the authors for their stimulating contributions. I am very pleased in particular that Sow-Hsin Chen agreed to contribute since he has done pioneering experimental work on the dynamical properties of confined water upon supercooling, and he is still very active in the field. The work presented by the group of J Swenson concerns also the glass transition of confined water. The Messina group (Crupi et al) is very active in the study of dynamical properties of confined water and they present their results on water in zeolites. From the experimental side there is also a contribution from J Dore's group, one of the first to perform neutron scattering studies on confined water. The work of J Klein looks at the mobility of water molecules confined in subnanometre films. Important contributions on the computer simulation side come from the Geiger group (Brovchenko et al). They performed very accurate simulations of water in nanopores, exploring a large portion of the phase space. Puibasset et al were able to build a very realistic model to simulate water inside Vycor. Zangi et al review the extensive work performed on confined water. Jedlovszky is an expert on the model potential for water and studied how the hydrogen bond network of water can be modified by the presence of an interface. The special issue is intended to stimulate interest and future work on this important subject.

  18. Fast sawtooth reconnection at realistic Lundquist numbers

    NASA Astrophysics Data System (ADS)

    Günter, S.; Yu, Q.; Lackner, K.; Bhattacharjee, A.; Huang, Y.-M.

    2015-01-01

    Magnetic reconnection, a ubiquitous phenomenon in astrophysics, space science and magnetic confinement research, frequently proceeds much faster than predicted by simple resistive MHD theory. Acceleration can result from the break-up of the thin Sweet-Parker current sheet into plasmoids, or from two-fluid effects decoupling mass and magnetic flux transport over the ion inertial length {{v}A}/{ωci} or the drift scale \\sqrt{{{T}e}/{{m}i}}/{ωci}, depending on the absence or presence of a strong magnetic guide field. We describe new results on the modelling of sawtooth reconnection in a simple tokamak geometry (circular cylindrical equilibrium) pushed to realistic Lundquist numbers for present day tokamaks. For the resistive MHD case, the onset criteria and the influence of plasmoids on the reconnection process agree well with earlier results found in the case of vanishing magnetic guide fields. While plasmoids are also observed in two-fluid calculations, they do not dominate the reconnection process for the range of plasma parameters considered in this study. In the two-fluid case they form as a transient phenomenon only. The reconnection times become weakly dependent on the S-value and for the most complete model—including two-fluid effects and equilibrium temperature and density gradients—agree well with those experimentally found on ASDEX Upgrade ≤ft(≤slant 100 μ s\\right).

  19. Determination of Realistic Fire Scenarios in Spacecraft

    NASA Technical Reports Server (NTRS)

    Dietrich, Daniel L.; Ruff, Gary A.; Urban, David

    2013-01-01

    This paper expands on previous work that examined how large a fire a crew member could successfully survive and extinguish in the confines of a spacecraft. The hazards to the crew and equipment during an accidental fire include excessive pressure rise resulting in a catastrophic rupture of the vehicle skin, excessive temperatures that burn or incapacitate the crew (due to hyperthermia), carbon dioxide build-up or accumulation of other combustion products (e.g. carbon monoxide). The previous work introduced a simplified model that treated the fire primarily as a source of heat and combustion products and sink for oxygen prescribed (input to the model) based on terrestrial standards. The model further treated the spacecraft as a closed system with no capability to vent to the vacuum of space. The model in the present work extends this analysis to more realistically treat the pressure relief system(s) of the spacecraft, include more combustion products (e.g. HF) in the analysis and attempt to predict the fire spread and limiting fire size (based on knowledge of terrestrial fires and the known characteristics of microgravity fires) rather than prescribe them in the analysis. Including the characteristics of vehicle pressure relief systems has a dramatic mitigating effect by eliminating vehicle overpressure for all but very large fires and reducing average gas-phase temperatures.

  20. Simulation of realistic retinoscopic measurement

    NASA Astrophysics Data System (ADS)

    Tan, Bo; Chen, Ying-Ling; Baker, K.; Lewis, J. W.; Swartz, T.; Jiang, Y.; Wang, M.

    2007-03-01

    Realistic simulation of ophthalmic measurements on normal and diseased eyes is presented. We use clinical data of ametropic and keratoconus patients to construct anatomically accurate three-dimensional eye models and simulate the measurement of a streak retinoscope with all the optical elements. The results show the clinical observations including the anomalous motion in high myopia and the scissors reflex in keratoconus. The demonstrated technique can be applied to other ophthalmic instruments and to other and more extensively abnormal eye conditions. It provides promising features for medical training and for evaluating and developing ocular instruments.

  1. Electromagnetic Scattering from Realistic Targets

    NASA Technical Reports Server (NTRS)

    Lee, Shung- Wu; Jin, Jian-Ming

    1997-01-01

    The general goal of the project is to develop computational tools for calculating radar signature of realistic targets. A hybrid technique that combines the shooting-and-bouncing-ray (SBR) method and the finite-element method (FEM) for the radiation characterization of microstrip patch antennas in a complex geometry was developed. In addition, a hybridization procedure to combine moment method (MoM) solution and the SBR method to treat the scattering of waveguide slot arrays on an aircraft was developed. A list of journal articles and conference papers is included.

  2. Electrokinetic transport in realistic nanochannels

    NASA Astrophysics Data System (ADS)

    Wang, Moran; Liu, Jin; Kang, Qinjun

    2009-11-01

    When an electrolyte solution contacts with a solid surface, the surface will likely be charged through an electrochemical adsorption process. The surface charge in general varies with the local bulk ionic concentration, the pH value and the temperature of the solution, and even with the double layer interactions in the narrow channel. Most of the previous studies are based on a constant zeta potential or surface charge density assumption, which does not reflect the realistic charge status at interfaces and may lead to inaccurate predictions. In this work, we first develop a generalized model for electrochemical boundary conditions on solid-liquid interfaces, which can closely approximate the known experimental properties. We further present nonequilibrium molecular dynamic (NEMD) simulations of electrokinetic transport in nanochannels. We take silica and carbon as examples of channel materials. Both monovalent and multivalent ionic solutions are considered. The electrokinetic transport properties for realistic nanochannels are therefore studied and a multiscale analysis for a new energy conversion device is performed.

  3. Optomechanical considerations for realistic tolerancing

    NASA Astrophysics Data System (ADS)

    Herman, Eric; Sasián, José; Youngworth, Richard N.

    2013-09-01

    Optical tolerancing simulation has improved so that the modeling of optomechanical accuracy can better predict as-built performance. A key refinement being proposed within this paper is monitoring formal interference fits and checking lens elements within their mechanical housings. Without proper checks, simulations may become physically unrealizable and pessimistic, thereby resulting in lower simulated yields. An improved simulation method has been defined and demonstrated in this paper with systems that do not have barrel constraints. The demonstration cases clearly show the trend of the beneficial impact with yield results, as a yield increase of 36.3% to 39.2% is garnered by one example. Considerations in simulating the realistic optomechanical system will assist in controlling cost and providing more accurate simulation results.

  4. Realist RCTs of complex interventions - an oxymoron.

    PubMed

    Marchal, Bruno; Westhorp, Gill; Wong, Geoff; Van Belle, Sara; Greenhalgh, Trisha; Kegels, Guy; Pawson, Ray

    2013-10-01

    Bonell et al. discuss the challenges of carrying out randomised controlled trials (RCTs) to evaluate complex interventions in public health, and consider the role of realist evaluation in enhancing this design (Bonell, Fletcher, Morton, Lorenc, & Moore, 2012). They argue for a "synergistic, rather than oppositional relationship between realist and randomised evaluation" and that "it is possible to benefit from the insights provided by realist evaluation without relinquishing the RCT as the best means of examining intervention causality." We present counter-arguments to their analysis of realist evaluation and their recommendations for realist RCTs. Bonell et al. are right to question whether and how (quasi-)experimental designs can be improved to better evaluate complex public health interventions. However, the paper does not explain how a research design that is fundamentally built upon a positivist ontological and epistemological position can be meaningfully adapted to allow it to be used from within a realist paradigm. The recommendations for "realist RCTs" do not sufficiently take into account important elements of complexity that pose major challenges for the RCT design. They also ignore key tenets of the realist evaluation approach. We propose that the adjective 'realist' should continue to be used only for studies based on a realist philosophy and whose analytic approach follows the established principles of realist analysis. It seems more correct to call the approach proposed by Bonell and colleagues 'theory informed RCT', which indeed can help in enhancing RCTs. PMID:23850482

  5. Confined compression of dental composites for Class I restorations

    PubMed Central

    Patki, Amol S.; Vural, Murat; Gosz, Mike

    2011-01-01

    This study focuses on the mechanical response of a particle-reinforced restorative dental composite (Renew™) under proportional transverse confinement to understand the effects of stress multiaxiality on its mechanical and failure behaviors. We describe the confining ring technique as an experimental tool to introduce multiaxial compressive stress states in dental composites that realistically mimic three-dimensional stress states commonly experienced by dental restorations in the oral cavity. Effect of initial radial misfit between confining ring and specimen is analyzed through computational finite element simulations, and an analytical treatment of problem is also provided to compute the confining stress during elasto-plastic expansion of confining ring. Experimental results suggest that inelastic response of Renew composite is significantly influenced by hydrostatic stress component, and pressure-dependent yield functions are required to analyze plastic deformations and internal damage accumulation process. PMID:21857744

  6. Gravity waves in a realistic atmosphere.

    NASA Technical Reports Server (NTRS)

    Liemohn, H. B.; Midgley, J. E.

    1966-01-01

    Internal atmospheric gravity waves in isothermal medium, solving hydrodynamic equations, determining wave propagation in realistic atmosphere for range of wave parameters, wind amplitude, reflected energy, etc

  7. Confinement of block copolymers

    SciTech Connect

    1995-12-31

    The following were studied: confinement of block copolymers, free surface confinement, effects of substrate interactions, random copolymers at homopolymer interfaces, phase separation in thin film polymer mixtures, buffing of polymer surfaces, and near edge x-ray absorption fine structure spectroscopy.

  8. Confinement Aquaculture. Final Report.

    ERIC Educational Resources Information Center

    Delaplaine School District, AR.

    The Delaplaine Agriculture Department Confinement Project, begun in June 1988, conducted a confinement aquaculture program by comparing the growth of channel catfish raised in cages in a pond to channel catfish raised in cages in the Black River, Arkansas. The study developed technology that would decrease costs in the domestication of fish, using…

  9. Indoor Confined Feedlots.

    PubMed

    Grooms, Daniel L; Kroll, Lee Anne K

    2015-07-01

    Indoor confined feedlots offer advantages that make them desirable in northern climates where high rainfall and snowfall occur. These facilities increase the risk of certain health risks, including lameness and tail injuries. Closed confinement can also facilitate the rapid spread of infectious disease. Veterinarians can help to manage these health risks by implementing management practices to reduce their occurrence. PMID:26139194

  10. Elastic membranes in confinement.

    PubMed

    Bostwick, J B; Miksis, M J; Davis, S H

    2016-07-01

    An elastic membrane stretched between two walls takes a shape defined by its length and the volume of fluid it encloses. Many biological structures, such as cells, mitochondria and coiled DNA, have fine internal structure in which a membrane (or elastic member) is geometrically 'confined' by another object. Here, the two-dimensional shape of an elastic membrane in a 'confining' box is studied by introducing a repulsive confinement pressure that prevents the membrane from intersecting the wall. The stage is set by contrasting confined and unconfined solutions. Continuation methods are then used to compute response diagrams, from which we identify the particular membrane mechanics that generate mitochondria-like shapes. Large confinement pressures yield complex response diagrams with secondary bifurcations and multiple turning points where modal identities may change. Regions in parameter space where such behaviour occurs are then mapped. PMID:27440257

  11. Elastic membranes in confinement

    NASA Astrophysics Data System (ADS)

    Bostwick, Joshua; Miksis, Michael; Davis, Stephen

    2014-11-01

    An elastic membrane stretched between two walls takes a shape defined by its length and the volume of fluid it encloses. Many biological structures, such as cells, mitochondria and DNA, have finer internal structure in which a membrane (or elastic member) is geometrically ``confined'' by another object. We study the shape stability of elastic membranes in a ``confining'' box and introduce repulsive van der Waals forces to prevent the membrane from intersecting the wall. We aim to define the parameter space associated with mitochondria-like deformations. We compare the confined to `unconfined' solutions and show how the structure and stability of the membrane shapes changes with the system parameters.

  12. Confinement of Coulomb balls

    SciTech Connect

    Arp, O.; Block, D.; Klindworth, M.; Piel, A.

    2005-12-15

    A model for the confinement of the recently discovered Coulomb balls is proposed. These spherical three-dimensional plasma crystals are trapped inside a rf discharge under gravity conditions and show an unusual structural order in complex plasmas. Measurements of the thermophoretic force acting on the trapped dust particles and simulations of the plasma properties of the discharge are presented. The proposed model of confinement considers thermophoretic, ion-drag, and electric field forces, and shows excellent agreement with the observations. The findings suggest that self-confinement does not significantly contribute to the structural properties of Coulomb balls.

  13. Polymer Crystallization under Confinement

    NASA Astrophysics Data System (ADS)

    Floudas, George

    Recent efforts indicated that polymer crystallization under confinement can be substantially different from the bulk. This can have important technological applications for the design of polymeric nanofibers with tunable mechanical strength, processability and optical clarity. However, the question of how, why and when polymers crystallize under confinement is not fully answered. Important studies of polymer crystallization confined to droplets and within the spherical nanodomains of block copolymers emphasized the interplay between heterogeneous and homogeneous nucleation. Herein we report on recent studies1-5 of polymer crystallization under hard confinement provided by model self-ordered AAO nanopores. Important open questions here are on the type of nucleation (homogeneous vs. heterogeneous), the size of critical nucleus, the crystal orientation and the possibility to control the overall crystallinity. Providing answers to these questions is of technological relevance for the understanding of nanocomposites containing semicrystalline polymers. In collaboration with Y. Suzuki, H. Duran, M. Steinhart, H.-J. Butt.

  14. Bacteria in Confined Spaces

    NASA Astrophysics Data System (ADS)

    Wilking, Connie; Weitz, David

    2010-03-01

    Bacterial cells can display differentiation between several developmental pathways, from planktonic to matrix-producing, depending upon the colony conditions. We study the confinement of bacteria in hydrogels as well as in liquid-liquid double emulsion droplets and observe the growth and morphology of these colonies as a function of time and environment. Our results can give insight into the behavior of bacterial colonies in confined spaces that can have applications in the areas of food science, cosmetics, and medicine.

  15. Fusion, magnetic confinement

    SciTech Connect

    Berk, H.L.

    1992-08-06

    An overview is presented of the principles of magnetic confinement of plasmas for the purpose of achieving controlled fusion conditions. Sec. 1 discusses the different nuclear fusion reactions which can be exploited in prospective fusion reactors and explains why special technologies need to be developed for the supply of tritium or {sup 3}He, the probable fuels. In Sec. 2 the Lawson condition, a criterion that is a measure of the quality of confinement relative to achieving fusion conditions, is explained. In Sec. 3 fluid equations are used to describe plasma confinement. Specific confinement configurations are considered. In Sec. 4 the orbits of particle sin magneti and electric fields are discussed. In Sec. 5 stability considerations are discussed. It is noted that confinement systems usually need to satisfy stability constraints imposed by ideal magnetohydrodynamic (MHD) theory. The paper culminates with a summary of experimental progress in magnetic confinement. Present experiments in tokamaks have reached the point that the conditions necessary to achieve fusion are being satisfied.

  16. Confining collective motion

    NASA Astrophysics Data System (ADS)

    Bartolo, Denis; Bricard, Antoine; Caussin, Jean-Baptiste; Savoie, Charles; Das, Debasish; Chepizhko, Oleskar; Peruani, Fernando; Saintillan, David

    2014-11-01

    It is well established that geometrical confinement have a significant impact on the structure and the flow properties of complex fluids. Prominent examples include the formation of topological defects in liquid crystals, and the flow instabilities of viscoelastic fluids in curved geometries. In striking contrast very little is known about the macroscopic behavior of confined active fluids. In this talk we show how to motorize plastic colloidal beads and turn them into self-propelled particles. Using microfluidic geometries we demonstrate how confinement impacts their collective motion. Combining quantitative experiments, analytical theory and numerical simulations we show how a population of motile bodies interacting via alignement and repulsive interactions self-organizes into a single heterogeneous macroscopic vortex that lives on the verge of a phase separation.

  17. Order, Disorder and Confinement

    SciTech Connect

    D'Elia, M.; Di Giacomo, A.; Pica, C.

    2006-01-12

    Studying the order of the chiral transition for Nf = 2 is of fundamental importance to understand the mechanism of color confinement. We present results of a numerical investigation on the order of the transition by use of a novel strategy in finite size scaling analysis. The specific heat and a number of susceptibilities are compared with the possible critical behaviours. A second order transition in the O(4) and O(2) universality classes are excluded. Substantial evidence emerges for a first order transition. Results are in agreement with those found by studying the scaling properties of a disorder parameter related to the dual superconductivity mechanism of color confinement.

  18. Development of a realistic human airway model.

    PubMed

    Lizal, Frantisek; Elcner, Jakub; Hopke, Philip K; Jedelsky, Jan; Jicha, Miroslav

    2012-03-01

    Numerous models of human lungs with various levels of idealization have been reported in the literature; consequently, results acquired using these models are difficult to compare to in vivo measurements. We have developed a set of model components based on realistic geometries, which permits the analysis of the effects of subsequent model simplification. A realistic digital upper airway geometry except for the lack of an oral cavity has been created which proved suitable both for computational fluid dynamics (CFD) simulations and for the fabrication of physical models. Subsequently, an oral cavity was added to the tracheobronchial geometry. The airway geometry including the oral cavity was adjusted to enable fabrication of a semi-realistic model. Five physical models were created based on these three digital geometries. Two optically transparent models, one with and one without the oral cavity, were constructed for flow velocity measurements, two realistic segmented models, one with and one without the oral cavity, were constructed for particle deposition measurements, and a semi-realistic model with glass cylindrical airways was developed for optical measurements of flow velocity and in situ particle size measurements. One-dimensional phase doppler anemometry measurements were made and compared to the CFD calculations for this model and good agreement was obtained. PMID:22558834

  19. Research on ultra-realistic communications

    NASA Astrophysics Data System (ADS)

    Enami, Kazumasa

    2009-05-01

    A future communication method enabled by information communications technology- ultra-realistic communication - is now being investigated in Japan and research and development of the various technologies required for its realization is being conducted, such as ultra-high definition TV, 3DTV, super surround sound reproduction and multi-sensory communication including touch and smell. An organization called the Ultra-Realistic Communications Forum (URCF) was also established for the effective promotion of R&D and the standardization of relating technologies. This document explains the activities of the URCF by industry, academia and government, and introduces researches on ultra-realistic communications in the National Institute of Information and Communications Technology (NICT).

  20. Fractional statistics and confinement

    NASA Astrophysics Data System (ADS)

    Gaete, P.; Wotzasek, C.

    2005-02-01

    It is shown that a pointlike composite having charge and magnetic moment displays a confining potential for the static interaction while simultaneously obeying fractional statistics in a pure gauge theory in three dimensions, without a Chern-Simons term. This result is distinct from the Maxwell-Chern-Simons theory that shows a screening nature for the potential.

  1. Plasma confinement at JET

    NASA Astrophysics Data System (ADS)

    Nunes, I.; JET Contributors

    2016-01-01

    Operation with a Be/W wall at JET (JET-ILW) has an impact on scenario development and energy confinement with respect to the carbon wall (JET-C). The main differences observed were (1) strong accumulation of W in the plasma core and (2) the need to mitigate the divertor target temperature to avoid W sputtering by Be and other low Z impurities and (3) a decrease of plasma energy confinement. A major difference is observed on the pedestal pressure, namely a reduction of the pedestal temperature which, due to profile stiffness the plasma core temperature is also reduced leading to a degradation of the global confinement. This effect is more pronounced in low β N scenarios. At high β N, the impact of the wall on the plasma energy confinement is mitigated by the weaker plasma energy degradation with power relative to the IPB98(y, 2) scaling calculated empirically for a CFC first wall. The smaller tolerable impurity concentration for tungsten (<10-5) compared to that of carbon requires the use of electron heating methods to prevent W accumulation in the plasma core region as well as gas puffing to avoid W entering the plasma core by ELM flushing and reduction of the W source by decreasing the target temperature. W source and the target temperature can also be controlled by impurity seeding. Nitrogen and Neon have been used and with both gases the reduction of the W source and the target temperature is observed. Whilst more experiments with Neon are necessary to assess its impact on energy confinement, a partial increase of plasma energy confinement is observed with Nitrogen, through the increase of edge temperature. The challenge for scenario development at JET is to extend the pulse length curtailed by its transient behavior (W accumulation or MHD), but more importantly by the divertor target temperature limits. Re-optimisation of the scenarios to mitigate the effect of the change of wall materials maintaining high global energy confinement similar to JET-C is

  2. Electrofreezing of confined water.

    PubMed

    Zangi, Ronen; Mark, Alan E

    2004-04-15

    We report results from molecular dynamics simulations of the freezing transition of TIP5P water molecules confined between two parallel plates under the influence of a homogeneous external electric field, with magnitude of 5 V/nm, along the lateral direction. For water confined to a thickness of a trilayer we find two different phases of ice at a temperature of T=280 K. The transformation between the two, proton-ordered, ice phases is found to be a strong first-order transition. The low-density ice phase is built from hexagonal rings parallel to the confining walls and corresponds to the structure of cubic ice. The high-density ice phase has an in-plane rhombic symmetry of the oxygen atoms and larger distortion of hydrogen bond angles. The short-range order of the two ice phases is the same as the local structure of the two bilayer phases of liquid water found recently in the absence of an electric field [J. Chem. Phys. 119, 1694 (2003)]. These high- and low-density phases of water differ in local ordering at the level of the second shell of nearest neighbors. The results reported in this paper, show a close similarity between the local structure of the liquid phase and the short-range order of the corresponding solid phase. This similarity might be enhanced in water due to the deep attractive well characterizing hydrogen bond interactions. We also investigate the low-density ice phase confined to a thickness of 4, 5, and 8 molecular layers under the influence of an electric field at T=300 K. In general, we find that the degree of ordering decreases as the distance between the two confining walls increases. PMID:15267616

  3. Keeping It Real: How Realistic Does Realistic Fiction for Children Need to Be?

    ERIC Educational Resources Information Center

    O'Connor, Barbara

    2010-01-01

    O'Connor, an author of realistic fiction for children, shares her attempts to strike a balance between carefree, uncensored, authentic, realistic writing and age-appropriate writing. Of course, complicating that balancing act is the fact that what seems age-appropriate to her might not seem so to everyone. O'Connor suggests that while it may be…

  4. Spatial Visualization by Realistic 3D Views

    ERIC Educational Resources Information Center

    Yue, Jianping

    2008-01-01

    In this study, the popular Purdue Spatial Visualization Test-Visualization by Rotations (PSVT-R) in isometric drawings was recreated with CAD software that allows 3D solid modeling and rendering to provide more realistic pictorial views. Both the original and the modified PSVT-R tests were given to students and their scores on the two tests were…

  5. Making a Literature Methods Course "Realistic."

    ERIC Educational Resources Information Center

    Lewis, William J.

    Recognizing that it can be a challenge to make an undergraduate literature methods course realistic, a methods instructor at a Michigan university has developed three major and several minor activities that have proven effective in preparing pre-student teachers for the "real world" of teaching and, at the same time, have been challenging and…

  6. Satellite Maps Deliver More Realistic Gaming

    NASA Technical Reports Server (NTRS)

    2013-01-01

    When Redwood City, California-based Electronic Arts (EA) decided to make SSX, its latest snowboarding video game, it faced challenges in creating realistic-looking mountains. The solution was NASA's ASTER Global Digital Elevation Map, made available by the Jet Propulsion Laboratory, which EA used to create 28 real-life mountains from 9 different ranges for its award-winning game.

  7. Improving Intuition Skills with Realistic Mathematics Education

    ERIC Educational Resources Information Center

    Hirza, Bonita; Kusumah, Yaya S.; Darhim; Zulkardi

    2014-01-01

    The intention of the present study was to see the improvement of students' intuitive skills. This improvement was seen by comparing the Realistic Mathematics Education (RME)-based instruction with the conventional mathematics instruction. The subject of this study was 164 fifth graders of elementary school in Palembang. The design of this study…

  8. Project REALISTIC: Determining Literacy Demands of Jobs.

    ERIC Educational Resources Information Center

    Sticht, Thomas C.; Kern, Richard P.

    1971-01-01

    REALISTIC is an acronym based upon the three literacy skills areas studied--REAding, LIStening, and ArithmeTIC. The general objectives of the project are: (1) to provide information concerning the demands for reading, listening, and arithmetic skills in several major military occupational specialties (MOSS), and (2) to provide information and…

  9. Realistic Portrayal of Aging. An Annotated Bibliography.

    ERIC Educational Resources Information Center

    Dodson, Anita E.; Hause, Judith B.

    This annotated bibliography cites selected reading materials for all age levels that present aging and the aged realistically with a full range of human behaviors. The listing is meant to serve as a resource to educators who wish to develop positive attitudes in children and in adolescents about the elderly and about themselves. Educators should…

  10. Faculty Development for Educators: A Realist Evaluation

    ERIC Educational Resources Information Center

    Sorinola, Olanrewaju O.; Thistlethwaite, Jill; Davies, David; Peile, Ed

    2015-01-01

    The effectiveness of faculty development (FD) activities for educators in UK medical schools remains underexplored. This study used a realist approach to evaluate FD and to test the hypothesis that motivation, engagement and perception are key mechanisms of effective FD activities. The authors observed and interviewed 33 course participants at one…

  11. Totally confined explosive welding

    NASA Technical Reports Server (NTRS)

    Bement, L. J. (Inventor)

    1978-01-01

    The undesirable by-products of explosive welding are confined and the association noise is reduced by the use of a simple enclosure into which the explosive is placed and in which the explosion occurs. An infrangible enclosure is removably attached to one of the members to be bonded at the point directly opposite the bond area. An explosive is completely confined within the enclosure at a point in close proximity to the member to be bonded and a detonating means is attached to the explosive. The balance of the enclosure, not occupied by explosive, is filled with a shaped material which directs the explosive pressure toward the bond area. A detonator adaptor controls the expansion of the enclosure by the explosive force so that the enclosure at no point experiences a discontinuity in expansion which causes rupture. The use of the technique is practical in the restricted area of a space station.

  12. DNA Confined in Nanochannels and Nanoslits

    NASA Astrophysics Data System (ADS)

    Tree, Douglas R.

    It has become increasingly apparent in recent years that next-generation sequencing (NGS) has a blind spot for large scale genomic variation, which is crucial for understanding the genotype-phenotype relationship. Genomic mapping methods attempt to overcome the weakesses of NGS by providing a coarse-grained map of the distances between restriction sites to aid in sequence assembly. From such methods, one hopes to realize fast and inexpensive de novo sequencing of human and plant genomes. One of the most promising methods for genomic mapping involves placing DNA inside a device only a few dozen nanometers wide called a nanochannel. A nanochannel stretches the DNA so that the distance between fluorescently labeled restriction sites can be measured en route to obtaining an accurate genome map. Unfortunately for those who wish to design devices, the physics of how DNA stretches when confined in a nanochannel is still an active area of research. Indeed, despite decades old theories from polymer physics regarding weakly and strongly stretched polymers, seminal experiments in the mid-2000s have gone unexplained until very recently. With a goal of creating a realistic engineering model of DNA in nanochannels, this dissertation addresses a number of important outstanding research topics in this area. We first discuss the physics of dilute solutions of DNA in free solution, which show distinctive behavior due to the stiff nature of the polymer. We then turn our attention to the equilibrium regimes of confined DNA and explore the effects of stiff chains and weak excluded volume on the confinement free energy and polymer extension. We also examine dynamic properties such as the diffusion coefficient and the characteristic relaxation time. Finally, we discuss a sister problem related to DNA confined in nanoslits, which shares much of the same physics as DNA confined in channels. Having done this, we find ourselves with a well-parameterized wormlike chain model that is

  13. Topological confinement and superconductivity

    SciTech Connect

    Al-hassanieh, Dhaled A; Batista, Cristian D

    2008-01-01

    We derive a Kondo Lattice model with a correlated conduction band from a two-band Hubbard Hamiltonian. This mapping allows us to describe the emergence of a robust pairing mechanism in a model that only contains repulsive interactions. The mechanism is due to topological confinement and results from the interplay between antiferromagnetism and delocalization. By using Density-Matrix-Renormalization-Group (DMRG) we demonstrate that this mechanism leads to dominant superconducting correlations in aID-system.

  14. Inertial Confinement fusion targets

    NASA Technical Reports Server (NTRS)

    Hendricks, C. D.

    1982-01-01

    Inertial confinement fusion (ICF) targets are made as simple flat discs, as hollow shells or as complicated multilayer structures. Many techniques were devised for producing the targets. Glass and metal shells are made by using drop and bubble techniques. Solid hydrogen shells are also produced by adapting old methods to the solution of modern problems. Some of these techniques, problems, and solutions are discussed. In addition, the applications of many of the techniques to fabrication of ICF targets is presented.

  15. Confined Vortex Scrubber

    SciTech Connect

    Not Available

    1990-02-01

    The program objective is to demonstrate efficient removal of fine particulates to sufficiently low levels to meet proposed small scale coal combustor emission standards. This is to be accomplished using a novel particulate removal device, the Confined Vortex Scrubber. This is the first quarterly technical progress report under this contract. Accordingly, a summary of the cleanup concept and the structure of the program is given here.

  16. Energy confinement in tokamaks

    SciTech Connect

    Sugihara, M.; Singer, C.

    1986-08-01

    A straightforward generalization is made of the ohmic heating energy confinement scalings of Pfeiffer and Waltz and Blackwell et. al. The resulting model is systematically calibrated to published data from limiter tokamaks with ohmic, electron cyclotron, and neutral beam heating. With considerably fewer explicitly adjustable free parameters, this model appears to give a better fit to the available data for limiter discharges than the combined ohmic/auxiliary heating model of Goldston.

  17. Freezing in confined geometries

    NASA Technical Reports Server (NTRS)

    Sokol, P. E.; Ma, W. J.; Herwig, K. W.; Snow, W. M.; Wang, Y.; Koplik, Joel; Banavar, Jayanth R.

    1992-01-01

    Results of detailed structural studies, using elastic neutron scattering, of the freezing of liquid O2 and D2 in porous vycor glass, are presented. The experimental studies have been complemented by computer simulations of the dynamics of freezing of a Lennard-Jones liquid in narrow channels bounded by molecular walls. Results point to a new simple physical interpretation of freezing in confined geometries.

  18. Electric field suppression of ultracold confined chemical reactions

    SciTech Connect

    Quemener, Goulven; Bohn, John L.

    2010-06-15

    We consider ultracold collisions of polar molecules confined in a one-dimensional optical lattice. Using a quantum scattering formalism and a frame transformation method, we calculate elastic and chemical quenching rate constants for fermionic molecules. Taking {sup 40}K{sup 87}Rb molecules as a prototype, we find that the rate of quenching collisions is enhanced at zero electric field as the confinement is increased but that this rate is suppressed when the electric field is turned on. For molecules with 500 nK of collision energy, for realistic molecular densities, and for achievable experimental electric fields and trap confinements, we predict lifetimes for KRb molecules to be 1 s. We find a ratio of elastic to quenching collision rates of about 100, which may be sufficient to achieve efficient evaporative cooling of polar KRb molecules.

  19. Spectral tunability of realistic plasmonic nanoantennas

    SciTech Connect

    Portela, Alejandro; Matsui, Hiroaki; Tabata, Hitoshi; Yano, Takaaki; Hayashi, Tomohiro; Hara, Masahiko; Santschi, Christian; Martin, Olivier J. F.

    2014-09-01

    Single nanoantenna spectroscopy was carried out on realistic dipole nanoantennas with various arm lengths and gap sizes fabricated by electron-beam lithography. A significant difference in resonance wavelength between realistic and ideal nanoantennas was found by comparing their spectral response. Consequently, the spectral tunability (96 nm) of the structures was significantly lower than that of simulated ideal nanoantennas. These observations, attributed to the nanofabrication process, are related to imperfections in the geometry, added metal adhesion layer, and shape modifications, which are analyzed in this work. Our results provide important information for the design of dipole nanoantennas clarifying the role of the structural modifications on the resonance spectra, as supported by calculations.

  20. Realistic molecular model of kerogen's nanostructure

    NASA Astrophysics Data System (ADS)

    Bousige, Colin; Ghimbeu, Camélia Matei; Vix-Guterl, Cathie; Pomerantz, Andrew E.; Suleimenova, Assiya; Vaughan, Gavin; Garbarino, Gaston; Feygenson, Mikhail; Wildgruber, Christoph; Ulm, Franz-Josef; Pellenq, Roland J.-M.; Coasne, Benoit

    2016-05-01

    Despite kerogen's importance as the organic backbone for hydrocarbon production from source rocks such as gas shale, the interplay between kerogen's chemistry, morphology and mechanics remains unexplored. As the environmental impact of shale gas rises, identifying functional relations between its geochemical, transport, elastic and fracture properties from realistic molecular models of kerogens becomes all the more important. Here, by using a hybrid experimental-simulation method, we propose a panel of realistic molecular models of mature and immature kerogens that provide a detailed picture of kerogen's nanostructure without considering the presence of clays and other minerals in shales. We probe the models' strengths and limitations, and show that they predict essential features amenable to experimental validation, including pore distribution, vibrational density of states and stiffness. We also show that kerogen's maturation, which manifests itself as an increase in the sp2/sp3 hybridization ratio, entails a crossover from plastic-to-brittle rupture mechanisms.

  1. The Challenge of Realistic TPV System Modeling

    NASA Astrophysics Data System (ADS)

    Aschaber, J.; Hebling, C.; Luther, J.

    2003-01-01

    Realistic modeling of a TPV system is a very demanding task. For a rough estimation of system limits many of assumptions simplify the complexity of a thermophotovoltaic converter. It's obvious that real systems can not be described by this way. An alternative approach that can deal with all these complexities like arbitrary geometries, participating media, temperature distributions etc. is the Monte Carlo method (MCM). This statistical method simulates radiative energy transfer by tracking the histories of a number of photons beginning with the emission by a radiating surface and ending with absorption on a surface or in a medium. All interactions in this way are considered. The disadvantage of large computation time compared to other methods is not longer a weakness with the speed of todays computers. This article points out different ways for realistic TPV system simulation focusing on statistical methods.

  2. Realistic molecular model of kerogen's nanostructure.

    PubMed

    Bousige, Colin; Ghimbeu, Camélia Matei; Vix-Guterl, Cathie; Pomerantz, Andrew E; Suleimenova, Assiya; Vaughan, Gavin; Garbarino, Gaston; Feygenson, Mikhail; Wildgruber, Christoph; Ulm, Franz-Josef; Pellenq, Roland J-M; Coasne, Benoit

    2016-05-01

    Despite kerogen's importance as the organic backbone for hydrocarbon production from source rocks such as gas shale, the interplay between kerogen's chemistry, morphology and mechanics remains unexplored. As the environmental impact of shale gas rises, identifying functional relations between its geochemical, transport, elastic and fracture properties from realistic molecular models of kerogens becomes all the more important. Here, by using a hybrid experimental-simulation method, we propose a panel of realistic molecular models of mature and immature kerogens that provide a detailed picture of kerogen's nanostructure without considering the presence of clays and other minerals in shales. We probe the models' strengths and limitations, and show that they predict essential features amenable to experimental validation, including pore distribution, vibrational density of states and stiffness. We also show that kerogen's maturation, which manifests itself as an increase in the sp(2)/sp(3) hybridization ratio, entails a crossover from plastic-to-brittle rupture mechanisms. PMID:26828313

  3. PLATO Simulator: Realistic simulations of expected observations

    NASA Astrophysics Data System (ADS)

    Marcos-Arenal, P.; Zima, W.; De Ridder, J.; Aerts, C.; Huygen, R.; Samadi, R.; Green, J.; Piotto, G.; Salmon, S.; Catala, C.; Rauer, H.

    2015-06-01

    PLATO Simulator is an end-to-end simulation software tool designed for the performance of realistic simulations of the expected observations of the PLATO mission but easily adaptable to similar types of missions. It models and simulates photometric time-series of CCD images by including models of the CCD and its electronics, the telescope optics, the stellar field, the jitter movements of the spacecraft, and all important natural noise sources.

  4. Dynamical Symmetries Reflected in Realistic Interactions

    SciTech Connect

    Sviratcheva, K.D.; Draayer, J.P.; Vary, J.P.; /Iowa State U. /LLNL, Livermore /SLAC

    2007-04-06

    Realistic nucleon-nucleon (NN) interactions, derived within the framework of meson theory or more recently in terms of chiral effective field theory, yield new possibilities for achieving a unified microscopic description of atomic nuclei. Based on spectral distribution methods, a comparison of these interactions to a most general Sp(4) dynamically symmetric interaction, which previously we found to reproduce well that part of the interaction that is responsible for shaping pairing-governed isobaric analog 0{sup +} states, can determine the extent to which this significantly simpler model Hamiltonian can be used to obtain an approximate, yet very good description of low-lying nuclear structure. And furthermore, one can apply this model in situations that would otherwise be prohibitive because of the size of the model space. In addition, we introduce a Sp(4) symmetry breaking term by including the quadrupole-quadrupole interaction in the analysis and examining the capacity of this extended model interaction to imitate realistic interactions. This provides a further step towards gaining a better understanding of the underlying foundation of realistic interactions and their ability to reproduce striking features of nuclei such as strong pairing correlations or collective rotational motion.

  5. Realistic Low-Momentum Nucleon-Nucleon Potential

    NASA Astrophysics Data System (ADS)

    Kuo, T. T. S.; Bogner, S. K.; Coraggio, L.; Covello, A.; Itaco, N.

    2002-04-01

    A low-momentum nucleon-nucleon (NN) potential Vlow-k is derived from modern realistic NN potentials VNN by integrating out their high momentum modes. The Kuo-Lee-Ratcliff folded diagram method together with the Andreozzi-Lee-Suzuki iteration method is employed to carry out the integration. Our Vlow-k is confined within a cut-off momentum Λ, and it preserves the deuteron binding energy, low-energy phase shifts and low-momentum half-on-shell T-matrix of VNN. For Λ within ~ 2fm-1, the Vlow-k derived from various NN potential models are very close to each other, although these models themselves are very different. Vlow-k is a smooth potential for Λ in the vicinity 2fm-1, and appears to be suitable for being used directly as shell model effective interaction without first calculating the Brueckner G matrix. Preliminary shell-model calculations using Vlow-k have led to encouraging results.

  6. Confined vortex scrubber

    SciTech Connect

    Not Available

    1990-07-01

    The program objective is to demonstrate efficient removal of fine particulates to sufficiently low levels to meet proposed small scale coal combustor emission standards using a cleanup technology appropriate to small scale coal combustors. This to be accomplished using a novel particulate removal device, the Confined Vortex Scrubber (CVS), which consists of a cylindrical vortex chamber with tangential flue gas inlets. The clean gas exit is via vortex finder outlets, one at either end of the tube. Liquid is introduced into the chamber and is confined within the vortex chamber by the centrifugal force generated by the gas flow itself. This confined liquid forms a layer through which the flue gas is then forced to bubble, producing a strong gas/liquid interaction, high inertial separation forces and efficient particulate cleanup. During this quarter a comprehensive series of cleanup experiments have been made for three CVS configurations. The first CVS configuration tested gave very efficient fine particulate removal at the design air mass flow rate (1 MM BUT/hr combustor exhaust flow), but had over 20{double prime}WC pressure drop. The first CVS configuration was then re-designed to produce the same very efficient particulate collection performance at a lower pressure drop. The current CVS configuration produces 99.4 percent cleanup of ultra-fine fly ash at the design air mass flow at a pressure drop of 12 {double prime}WC with a liquid/air flow ratio of 0.31/m{sup 3}. Unlike venturi scrubbers, the collection performance of the CVS is insensitive to dust loading and to liquid/air flow ratio.

  7. Confinement Contains Condensates

    SciTech Connect

    Brodsky, Stanley J.; Roberts, Craig D.; Shrock, Robert; Tandy, Peter C.

    2012-03-12

    Dynamical chiral symmetry breaking and its connection to the generation of hadron masses has historically been viewed as a vacuum phenomenon. We argue that confinement makes such a position untenable. If quark-hadron duality is a reality in QCD, then condensates, those quantities that have commonly been viewed as constant empirical mass-scales that fill all spacetime, are instead wholly contained within hadrons; i.e., they are a property of hadrons themselves and expressed, e.g., in their Bethe-Salpeter or light-front wave functions. We explain that this paradigm is consistent with empirical evidence, and incidentally expose misconceptions in a recent Comment.

  8. Confinement Vessel Dynamic Analysis

    SciTech Connect

    R. Robert Stevens; Stephen P. Rojas

    1999-08-01

    A series of hydrodynamic and structural analyses of a spherical confinement vessel has been performed. The analyses used a hydrodynamic code to estimate the dynamic blast pressures at the vessel's internal surfaces caused by the detonation of a mass of high explosive, then used those blast pressures as applied loads in an explicit finite element model to simulate the vessel's structural response. Numerous load cases were considered. Particular attention was paid to the bolted port connections and the O-ring pressure seals. The analysis methods and results are discussed, and comparisons to experimental results are made.

  9. Statistical Contact Model for Confined Molecules

    NASA Astrophysics Data System (ADS)

    Santamaria, Ruben; de la Paz, Antonio Alvarez; Roskop, Luke; Adamowicz, Ludwik

    2016-06-01

    A theory that describes in a realistic form a system of atoms under the effects of temperature and confinement is presented. The theory departs from a Lagrangian of the Zwanzig type and contains the main ingredients for describing a system of atoms immersed in a heat bath that is also formed by atoms. The equations of motion are derived according to Lagrangian mechanics. The application of statistical mechanics to describe the bulk effects greatly reduces the complexity of the equations. The resultant equations of motion are of the Langevin type with the viscosity and the temperature of the heat reservoir able to influence the trajectories of the particles. The pressure effects are introduced mechanically by using a container with an atomic structure immersed in the heat bath. The relevant variables that determine the equation of state are included in the formulation. The theory is illustrated by the derivation of the equation of state for a system with 76 atoms confined inside of a 180-atom fullerene-like cage that is immersed in fluid forming the heat bath at a temperature of 350 K and with the friction coefficient of 3.0 {ps}^{-1} . The atoms are of the type believed to form the cores of the Uranus and Neptune planets. The dynamic and the static pressures of the confined system are varied in the 3-5 KBar and 2-30 MBar ranges, respectively. The formulation can be equally used to analyze chemical reactions under specific conditions of pressure and temperature, determine the structure of clusters with their corresponding equation of state, the conditions for hydrogen storage, etc. The theory is consistent with the principles of thermodynamics and it is intrinsically ergodic, of general use, and the first of this kind.

  10. Statistical Contact Model for Confined Molecules

    NASA Astrophysics Data System (ADS)

    Santamaria, Ruben; de la Paz, Antonio Alvarez; Roskop, Luke; Adamowicz, Ludwik

    2016-08-01

    A theory that describes in a realistic form a system of atoms under the effects of temperature and confinement is presented. The theory departs from a Lagrangian of the Zwanzig type and contains the main ingredients for describing a system of atoms immersed in a heat bath that is also formed by atoms. The equations of motion are derived according to Lagrangian mechanics. The application of statistical mechanics to describe the bulk effects greatly reduces the complexity of the equations. The resultant equations of motion are of the Langevin type with the viscosity and the temperature of the heat reservoir able to influence the trajectories of the particles. The pressure effects are introduced mechanically by using a container with an atomic structure immersed in the heat bath. The relevant variables that determine the equation of state are included in the formulation. The theory is illustrated by the derivation of the equation of state for a system with 76 atoms confined inside of a 180-atom fullerene-like cage that is immersed in fluid forming the heat bath at a temperature of 350 K and with the friction coefficient of 3.0 {ps}^{-1}. The atoms are of the type believed to form the cores of the Uranus and Neptune planets. The dynamic and the static pressures of the confined system are varied in the 3-5 KBar and 2-30 MBar ranges, respectively. The formulation can be equally used to analyze chemical reactions under specific conditions of pressure and temperature, determine the structure of clusters with their corresponding equation of state, the conditions for hydrogen storage, etc. The theory is consistent with the principles of thermodynamics and it is intrinsically ergodic, of general use, and the first of this kind.

  11. Realistic and efficient 2D crack simulation

    NASA Astrophysics Data System (ADS)

    Yadegar, Jacob; Liu, Xiaoqing; Singh, Abhishek

    2010-04-01

    Although numerical algorithms for 2D crack simulation have been studied in Modeling and Simulation (M&S) and computer graphics for decades, realism and computational efficiency are still major challenges. In this paper, we introduce a high-fidelity, scalable, adaptive and efficient/runtime 2D crack/fracture simulation system by applying the mathematically elegant Peano-Cesaro triangular meshing/remeshing technique to model the generation of shards/fragments. The recursive fractal sweep associated with the Peano-Cesaro triangulation provides efficient local multi-resolution refinement to any level-of-detail. The generated binary decomposition tree also provides efficient neighbor retrieval mechanism used for mesh element splitting and merging with minimal memory requirements essential for realistic 2D fragment formation. Upon load impact/contact/penetration, a number of factors including impact angle, impact energy, and material properties are all taken into account to produce the criteria of crack initialization, propagation, and termination leading to realistic fractal-like rubble/fragments formation. The aforementioned parameters are used as variables of probabilistic models of cracks/shards formation, making the proposed solution highly adaptive by allowing machine learning mechanisms learn the optimal values for the variables/parameters based on prior benchmark data generated by off-line physics based simulation solutions that produce accurate fractures/shards though at highly non-real time paste. Crack/fracture simulation has been conducted on various load impacts with different initial locations at various impulse scales. The simulation results demonstrate that the proposed system has the capability to realistically and efficiently simulate 2D crack phenomena (such as window shattering and shards generation) with diverse potentials in military and civil M&S applications such as training and mission planning.

  12. Adiabatic Hyperspherical Analysis of Realistic Nuclear Potentials

    NASA Astrophysics Data System (ADS)

    Daily, K. M.; Kievsky, Alejandro; Greene, Chris H.

    2015-12-01

    Using the hyperspherical adiabatic method with the realistic nuclear potentials Argonne V14, Argonne V18, and Argonne V18 with the Urbana IX three-body potential, we calculate the adiabatic potentials and the triton bound state energies. We find that a discrete variable representation with the slow variable discretization method along the hyperradial degree of freedom results in energies consistent with the literature. However, using a Laguerre basis results in missing energy, even when extrapolated to an infinite number of basis functions and channels. We do not include the isospin T = 3/2 contribution in our analysis.

  13. Quantum states prepared by realistic entanglement swapping

    SciTech Connect

    Scherer, Artur; Howard, Regina B.; Sanders, Barry C.; Tittel, Wolfgang

    2009-12-15

    Entanglement swapping between photon pairs is a fundamental building block in schemes using quantum relays or quantum repeaters to overcome the range limits of long-distance quantum key distribution. We develop a closed-form solution for the actual quantum states prepared by realistic entanglement swapping, which takes into account experimental deficiencies due to inefficient detectors, detector dark counts, and multiphoton-pair contributions of parametric down-conversion sources. We investigate how the entanglement present in the final state of the remaining modes is affected by the real-world imperfections. To test the predictions of our theory, comparison with previously published experimental entanglement swapping is provided.

  14. Realist model approach to quantum mechanics

    NASA Astrophysics Data System (ADS)

    Hájíček, P.

    2013-06-01

    The paper proves that quantum mechanics is compatible with the constructive realism of modern philosophy of science. The proof is based on the observation that properties of quantum systems that are uniquely determined by their preparations can be assumed objective without the difficulties that are encountered by the same assumption about values of observables. The resulting realist interpretation of quantum mechanics is made rigorous by studying the space of quantum states—the convex set of state operators. Prepared states are classified according to their statistical structure into indecomposable and decomposable instead of pure and mixed. Simple objective properties are defined and showed to form a Boolean lattice.

  15. A realistic renormalizable supersymmetric E₆ model

    SciTech Connect

    Bajc, Borut; Susič, Vasja

    2014-01-01

    A complete realistic model based on the supersymmetric version of E₆ is presented. It consists of three copies of matter 27, and a Higgs sector made of 2×(27+27⁻)+351´+351´⁻ representations. An analytic solution to the equations of motion is found which spontaneously breaks the gauge group into the Standard Model. The light fermion mass matrices are written down explicitly as non-linear functions of three Yukawa matrices. This contribution is based on Ref. [1].

  16. Amoeboid motion in confined geometry

    NASA Astrophysics Data System (ADS)

    Wu, Hao; Thiébaud, M.; Hu, W.-F.; Farutin, A.; Rafaï, S.; Lai, M.-C.; Peyla, P.; Misbah, C.

    2015-11-01

    Many eukaryotic cells undergo frequent shape changes (described as amoeboid motion) that enable them to move forward. We investigate the effect of confinement on a minimal model of amoeboid swimmer. A complex picture emerges: (i) The swimmer's nature (i.e., either pusher or puller) can be modified by confinement, thus suggesting that this is not an intrinsic property of the swimmer. This swimming nature transition stems from intricate internal degrees of freedom of membrane deformation. (ii) The swimming speed might increase with increasing confinement before decreasing again for stronger confinements. (iii) A straight amoeoboid swimmer's trajectory in the channel can become unstable, and ample lateral excursions of the swimmer prevail. This happens for both pusher- and puller-type swimmers. For weak confinement, these excursions are symmetric, while they become asymmetric at stronger confinement, whereby the swimmer is located closer to one of the two walls. In this study, we combine numerical and theoretical analyses.

  17. Deforming baryons into confining strings

    NASA Astrophysics Data System (ADS)

    Hartnoll, Sean A.; Portugues, Rubén

    2004-09-01

    We find explicit probe D3-brane solutions in the infrared of the Maldacena-Nuñez background. The solutions describe deformed baryon vertices: q external quarks are separated in spacetime from the remaining N-q. As the separation is taken to infinity we recover known solutions describing infinite confining strings in N=1 gauge theory. We present results for the mass of finite confining strings as a function of length. We also find probe D2-brane solutions in a confining type IIA geometry, the reduction of a G2 holonomy M theory background. The relation between these deformed baryons and confining strings is not as straightforward.

  18. Realistic Ground Motion Scenarios: Methodological Approach

    SciTech Connect

    Nunziata, C.; Peresan, A.; Romanelli, F.; Vaccari, F.; Zuccolo, E.; Panza, G. F.

    2008-07-08

    The definition of realistic seismic input can be obtained from the computation of a wide set of time histories, corresponding to possible seismotectonic scenarios. The propagation of the waves in the bedrock from the source to the local laterally varying structure is computed with the modal summation technique, while in the laterally heterogeneous structure the finite difference method is used. The definition of shear wave velocities within the soil cover is obtained from the non-linear inversion of the dispersion curve of group velocities of Rayleigh waves, artificially or naturally generated. Information about the possible focal mechanisms of the sources can be obtained from historical seismicity, based on earthquake catalogues and inversion of isoseismal maps. In addition, morphostructural zonation and pattern recognition of seismogenic nodes is useful to identify areas prone to strong earthquakes, based on the combined analysis of topographic, tectonic, geological maps and satellite photos. We show that the quantitative knowledge of regional geological structures and the computation of realistic ground motion can be a powerful tool for a preventive definition of the seismic hazard in Italy. Then, the formulation of reliable building codes, based on the evaluation of the main potential earthquakes, will have a great impact on the effective reduction of the seismic vulnerability of Italian urban areas, validating or improving the national building code.

  19. Realistic magnetohydrodynamical simulation of solar local supergranulation

    NASA Astrophysics Data System (ADS)

    Ustyugov, Sergey D.

    2010-12-01

    Three-dimensional numerical simulations of solar surface magnetoconvection using realistic model physics are conducted. The thermal structure of convective motions into the upper radiative layers of the photosphere, the main scales of convective cells and the penetration depths of convection are investigated. We take part of the solar photosphere with a size of 60×60 Mm2 in the horizontal direction and of depth 20 Mm from the level of the visible solar surface. We use a realistic initial model of the sun and apply the equation of state and opacities of stellar matter. The equations of fully compressible radiation magnetohydrodynamics (MHD) with dynamical viscosity and gravity are solved. We apply (i) the conservative total variation diminishing (TVD) difference scheme for MHD, (ii) the diffusion approximation for radiative transfer and (iii) dynamical viscosity from subgrid-scale modeling. In simulation, we take a uniform two-dimensional grid in the horizontal plane and a nonuniform grid in the vertical direction with the number of cells being 600×600×204. We use 512 processors with distributed memory multiprocessors on the supercomputer MVS-100k at the Joint Computational Centre of the Russian Academy of Sciences.

  20. The realist interpretation of the atmosphere

    NASA Astrophysics Data System (ADS)

    Anduaga, Aitor

    The discovery of a clearly stratified structure of layers in the upper atmosphere has been--and still is--invoked too often as the great paradigm of atmospheric sciences in the 20th century. Behind this vision, an emphasis--or better, an overstatement--on the reality of the concept of layer lies. One of the few historians of physics who have not ignored this phenomenon of reification, C. Stewart Gillmor, attributed it to--somewhat ambiguous-- cultural (or perhaps, more generally, contextual) factors, though he never specified their nature. In this essay, I aim to demonstrate that, in the interwar years, most radiophysicists and some atomic physicists, for reasons principally related to extrinsic influences and to a lesser extent to internal developments of their own science, fervidly embraced a realist interpretation of the ionosphere. We will focus on the historical circumstances in which a specific social and commercial environment came to exert a strong influence on upper atmospheric physicists, and in which realism as a product validating the "truth" of certain practices and beliefs arose. This realist commitment I attribute to the mutual reinforcement of atmospheric physics and commercial and imperial interests in long-distance communications.

  1. Realistic Radio Communications in Pilot Simulator Training

    NASA Technical Reports Server (NTRS)

    Burki-Cohen, Judith; Kendra, Andrew J.; Kanki, Barbara G.; Lee, Alfred T.

    2000-01-01

    Simulators used for total training and evaluation of airline pilots must satisfy stringent criteria in order to assure their adequacy for training and checking maneuvers. Air traffic control and company radio communications simulation, however, may still be left to role-play by the already taxed instructor/evaluators in spite of their central importance in every aspect of the flight environment. The underlying premise of this research is that providing a realistic radio communications environment would increase safety by enhancing pilot training and evaluation. This report summarizes the first-year efforts of assessing the requirement and feasibility of simulating radio communications automatically. A review of the training and crew resource/task management literature showed both practical and theoretical support for the need for realistic radio communications simulation. A survey of 29 instructor/evaluators from 14 airlines revealed that radio communications are mainly role-played by the instructor/evaluators. This increases instructor/evaluators' own workload while unrealistically lowering pilot communications load compared to actual operations, with a concomitant loss in training/evaluation effectiveness. A technology review searching for an automated means of providing radio communications to and from aircraft with minimal human effort showed that while promising, the technology is still immature. Further research and the need for establishing a proof-of-concept are also discussed.

  2. HELIOSEISMOLOGY OF A REALISTIC MAGNETOCONVECTIVE SUNSPOT SIMULATION

    SciTech Connect

    Braun, D. C.; Birch, A. C.; Rempel, M.; Duvall, T. L. Jr. E-mail: aaronb@cora.nwra.com E-mail: Thomas.L.Duvall@nasa.gov

    2012-01-01

    We compare helioseismic travel-time shifts measured from a realistic magnetoconvective sunspot simulation using both helioseismic holography and time-distance helioseismology, and measured from real sunspots observed with the Helioseismic and Magnetic Imager instrument on board the Solar Dynamics Observatory and the Michelson Doppler Imager instrument on board the Solar and Heliospheric Observatory. We find remarkable similarities in the travel-time shifts measured between the methodologies applied and between the simulated and real sunspots. Forward modeling of the travel-time shifts using either Born or ray approximation kernels and the sound-speed perturbations present in the simulation indicates major disagreements with the measured travel-time shifts. These findings do not substantially change with the application of a correction for the reduction of wave amplitudes in the simulated and real sunspots. Overall, our findings demonstrate the need for new methods for inferring the subsurface structure of sunspots through helioseismic inversions.

  3. Helioseismology of a Realistic Magnetoconvective Sunspot Simulation

    NASA Technical Reports Server (NTRS)

    Braun, D. C.; Birch, A. C.; Rempel, M.; Duvall, T. L., Jr.

    2012-01-01

    We compare helioseismic travel-time shifts measured from a realistic magnetoconvective sunspot simulation using both helioseismic holography and time-distance helioseismology, and measured from real sunspots observed with the Helioseismic and Magnetic Imager instrument on board the Solar Dynamics Observatory and the Michelson Doppler Imager instrument on board the Solar and Heliospheric Observatory. We find remarkable similarities in the travel-time shifts measured between the methodologies applied and between the simulated and real sunspots. Forward modeling of the travel-time shifts using either Born or ray approximation kernels and the sound-speed perturbations present in the simulation indicates major disagreements with the measured travel-time shifts. These findings do not substantially change with the application of a correction for the reduction of wave amplitudes in the simulated and real sunspots. Overall, our findings demonstrate the need for new methods for inferring the subsurface structure of sunspots through helioseismic inversions.

  4. Field line resonances in a realistic magnetosphere

    SciTech Connect

    Mukherjee, G.K.; Rajaram, R. )

    1989-04-01

    An internally consistent theoretical framework is developed to study the field line oscillations in the realistic magnetospheric magnetic field using the Mead and Fairfield (1975) model. The nondipolar contributions are numerically computed for the fundamental period of the modes that would reduce to the localized toroidal and poloidal modes described by Cummings et al. (1969) in the dipole limit. It is shown that the nondipolar contributions are not significant at the geostationary orbit but become large further out in the magnetosphere. The nondipolar contributions are very different for the two modes. The situation becomes very much more complicated in the dawn/dusk region where a continuous range of periods exist depending on the orientation of the field line oscillation.

  5. Realistic page-turning of electronic books

    NASA Astrophysics Data System (ADS)

    Fan, Chaoran; Li, Haisheng; Bai, Yannan

    2014-01-01

    The booming electronic books (e-books), as an extension to the paper book, are popular with readers. Recently, many efforts are put into the realistic page-turning simulation o f e-book to improve its reading experience. This paper presents a new 3D page-turning simulation approach, which employs piecewise time-dependent cylindrical surfaces to describe the turning page and constructs smooth transition method between time-dependent cylinders. The page-turning animation is produced by sequentially mapping the turning page into the cylinders with different radii and positions. Compared to the previous approaches, our method is able to imitate various effects efficiently and obtains more natural animation of turning page.

  6. Realistic limits for subpixel movement detection.

    PubMed

    Mas, David; Perez, Jorge; Ferrer, Belen; Espinosa, Julian

    2016-07-01

    Object tracking with subpixel accuracy is of fundamental importance in many fields since it provides optimal performance at relatively low cost. Although there are many theoretical proposals that lead to resolution increments of several orders of magnitude, in practice this resolution is limited by the imaging systems. In this paper we propose and demonstrate through simple numerical models a realistic limit for subpixel accuracy. The final result is that maximum achievable resolution enhancement is connected with the dynamic range of the image, i.e., the detection limit is 1/2(nr.bits). The results here presented may aid in proper design of superresolution experiments in microscopy, surveillance, defense, and other fields. PMID:27409179

  7. Confined helium on Lagrange meshes.

    PubMed

    Baye, D; Dohet-Eraly, J

    2015-12-21

    The Lagrange-mesh method has the simplicity of a calculation on a mesh and can have the accuracy of a variational method. It is applied to the study of a confined helium atom. Two types of confinement are considered. Soft confinements by potentials are studied in perimetric coordinates. Hard confinement in impenetrable spherical cavities is studied in a system of rescaled perimetric coordinates varying in [0,1] intervals. Energies and mean values of the distances between electrons and between an electron and the helium nucleus are calculated. A high accuracy of 11 to 15 significant figures is obtained with small computing times. Pressures acting on the confined atom are also computed. For sphere radii smaller than 1, their relative accuracies are better than 10(-10). For larger radii up to 10, they progressively decrease to 10(-3), still improving the best literature results. PMID:25732054

  8. Two Realistic Beagle Models for Dose Assessment.

    PubMed

    Stabin, Michael G; Kost, Susan D; Segars, William P; Guilmette, Raymond A

    2015-09-01

    Previously, the authors developed a series of eight realistic digital mouse and rat whole body phantoms based on NURBS technology to facilitate internal and external dose calculations in various species of rodents. In this paper, two body phantoms of adult beagles are described based on voxel images converted to NURBS models. Specific absorbed fractions for activity in 24 organs are presented in these models. CT images were acquired of an adult male and female beagle. The images were segmented, and the organs and structures were modeled using NURBS surfaces and polygon meshes. Each model was voxelized at a resolution of 0.75 × 0.75 × 2 mm. The voxel versions were implemented in GEANT4 radiation transport codes to calculate specific absorbed fractions (SAFs) using internal photon and electron sources. Photon and electron SAFs were then calculated for relevant organs in both models. The SAFs for photons and electrons were compatible with results observed by others. Absorbed fractions for electrons for organ self-irradiation were significantly less than 1.0 at energies above 0.5 MeV, as expected for many of these small-sized organs, and measurable cross irradiation was observed for many organ pairs for high-energy electrons (as would be emitted by nuclides like 32P, 90Y, or 188Re). The SAFs were used with standardized decay data to develop dose factors (DFs) for radiation dose calculations using the RADAR Method. These two new realistic models of male and female beagle dogs will be useful in radiation dosimetry calculations for external or internal simulated sources. PMID:26222214

  9. Realistic texture in simulated thermal infrared imagery

    NASA Astrophysics Data System (ADS)

    Ward, Jason T.

    Creating a visually-realistic yet radiometrically-accurate simulation of thermal infrared (TIR) imagery is a challenge that has plagued members of industry and academia alike. The goal of imagery simulation is to provide a practical alternative to the often staggering effort required to collect actual data. Previous attempts at simulating TIR imagery have suffered from a lack of texture---the simulated scenes generally failed to reproduce the natural variability seen in actual TIR images. Realistic synthetic TIR imagery requires modeling sources of variability including surface effects such as solar insolation and convective heat exchange as well as sub-surface effects such as density and water content. This research effort utilized the Digital Imaging and Remote Sensing Image Generation (DIRSIG) model, developed at the Rochester Institute of Technology, to investigate how these additional sources of variability could be modeled to correctly and accurately provide simulated TIR imagery. Actual thermal data were collected, analyzed, and exploited to determine the underlying thermodynamic phenomena and ascertain how these phenomena are best modeled. The underlying task was to determine how to apply texture in the thermal region to attain radiometrically-correct, visually-appealing simulated imagery. Three natural desert scenes were used to test the methodologies that were developed for estimating per-pixel thermal parameters which could then be used for TIR image simulation by DIRSIG. Additional metrics were devised and applied to the synthetic images to further quantify the success of this research. The resulting imagery demonstrated that these new methodologies for modeling TIR phenomena and the utilization of an improved DIRSIG tool improved the root mean-squared error (RMSE) of our synthetic TIR imagery by up to 88%.

  10. Demonstrating a Realistic IP Mission Prototype

    NASA Technical Reports Server (NTRS)

    Rash, James; Ferrer, Arturo B.; Goodman, Nancy; Ghazi-Tehrani, Samira; Polk, Joe; Johnson, Lorin; Menke, Greg; Miller, Bill; Criscuolo, Ed; Hogie, Keith

    2003-01-01

    Flight software and hardware and realistic space communications environments were elements of recent demonstrations of the Internet Protocol (IP) mission concept in the lab. The Operating Missions as Nodes on the Internet (OMNI) Project and the Flight Software Branch at NASA/GSFC collaborated to build the prototype of a representative space mission that employed unmodified off-the-shelf Internet protocols and technologies for end-to-end communications between the spacecraft/instruments and the ground system/users. The realistic elements used in the prototype included an RF communications link simulator and components of the TRIANA mission flight software and ground support system. A web-enabled camera connected to the spacecraft computer via an Ethernet LAN represented an on-board instrument creating image data. In addition to the protocols at the link layer (HDLC), transport layer (UDP, TCP), and network (IP) layer, a reliable file delivery protocol (MDP) at the application layer enabled reliable data delivery both to and from the spacecraft. The standard Network Time Protocol (NTP) performed on-board clock synchronization with a ground time standard. The demonstrations of the prototype mission illustrated some of the advantages of using Internet standards and technologies for space missions, but also helped identify issues that must be addressed. These issues include applicability to embedded real-time systems on flight-qualified hardware, range of applicability of TCP, and liability for and maintenance of commercial off-the-shelf (COTS) products. The NASA Earth Science Technology Office (ESTO) funded the collaboration to build and demonstrate the prototype IP mission.

  11. Compact entanglement distillery using realistic quantum memories

    NASA Astrophysics Data System (ADS)

    Chakhmakhchyan, Levon; Guérin, Stéphane; Nunn, Joshua; Datta, Animesh

    2013-10-01

    We adopt the beam-splitter model for losses to analyze the performance of a recent compact continuous-variable entanglement distillation protocol [A. Datta , Phys. Rev. Lett.PRLTAO0031-900710.1103/PhysRevLett.108.060502 108, 060502 (2012)] implemented using realistic quantum memories. We show that the decoherence undergone by a two-mode squeezed state while stored in a quantum memory can strongly modify the results of the preparatory step of the protocol. We find that the well-known method for locally increasing entanglement, phonon subtraction, may not result in entanglement gain when losses are taken into account. Thus, we investigate the critical number mc of phonon subtraction attempts from the matter modes of the quantum memory. If the initial state is not de-Gaussified within mc attempts, the protocol should be restarted to obtain any entanglement increase. Moreover, the condition mc>1 implies an additional constraint on the subtraction beam-splitter interaction transmissivity, viz., it should be about 50% for a wide range of protocol parameters. Additionally, we consider the average entanglement rate, which takes into account both the unavoidable probabilistic nature of the protocol and its possible failure as a result of a large number of unsuccessful subtraction attempts. We find that a higher value of the average entanglement can be achieved by increasing the subtraction beam-splitter interaction transmissivity. We conclude that the compact distillation protocol with the practical constraints coming from realistic quantum memories allows a feasible experimental realization within existing technologies.

  12. Inertial confinement fusion

    SciTech Connect

    Powers, L.; Condouris, R.; Kotowski, M.; Murphy, P.W.

    1992-01-01

    This issue of the ICF Quarterly contains seven articles that describe recent progress in Lawrence Livermore National Laboratory's ICF program. The Department of Energy recently initiated an effort to design a 1--2 MJ glass laser, the proposed National Ignition Facility (NIF). These articles span various aspects of a program which is aimed at moving forward toward such a facility by continuing to use the Nova laser to gain understanding of NIF-relevant target physics, by developing concepts for an NIF laser driver, and by envisioning a variety of applications for larger ICF facilities. This report discusses research on the following topics: Stimulated Rotational Raman Scattering in Nitrogen; A Maxwell Equation Solver in LASNEX for the Simulation of Moderately Intense Ultrashort Pulse Experiments; Measurements of Radial Heat-Wave Propagation in Laser-Produced Plasmas; Laser-Seeded Modulation Growth on Directly Driven Foils; Stimulated Raman Scattering in Large-Aperture, High-Fluence Frequency-Conversion Crystals; Fission Product Hazard Reduction Using Inertial Fusion Energy; Use of Inertial Confinement Fusion for Nuclear Weapons Effects Simulations.

  13. Thermostating highly confined fluids.

    PubMed

    Bernardi, Stefano; Todd, B D; Searles, Debra J

    2010-06-28

    In this work we show how different use of thermostating devices and modeling of walls influence the mechanical and dynamical properties of confined nanofluids. We consider a two dimensional fluid undergoing Couette flow using nonequilibrium molecular dynamics simulations. Because the system is highly inhomogeneous, the density shows strong fluctuations across the channel. We compare the dynamics produced by applying a thermostating device directly to the fluid with that obtained when the wall is thermostated, considering also the effects of using rigid walls. This comparison involves an analysis of the chaoticity of the fluid and evaluation of mechanical properties across the channel. We look at two thermostating devices with either rigid or vibrating atomic walls and compare them with a system only thermostated by conduction through vibrating atomic walls. Sensitive changes are observed in the xy component of the pressure tensor, streaming velocity, and density across the pore and the Lyapunov localization of the fluid. We also find that the fluid slip can be significantly reduced by rigid walls. Our results suggest caution in interpreting the results of systems in which fluid atoms are thermostated and/or wall atoms are constrained to be rigid, such as, for example, water inside carbon nanotubes. PMID:20590213

  14. Inertial Confinement Fusion and the National Ignition Facility (NIF)

    SciTech Connect

    Ross, P.

    2012-08-29

    Inertial confinement fusion (ICF) seeks to provide sustainable fusion energy by compressing frozen deuterium and tritium fuel to extremely high densities. The advantages of fusion vs. fission are discussed, including total energy per reaction and energy per nucleon. The Lawson Criterion, defining the requirements for ignition, is derived and explained. Different confinement methods and their implications are discussed. The feasibility of creating a power plant using ICF is analyzed using realistic and feasible numbers. The National Ignition Facility (NIF) at Lawrence Livermore National Laboratory is shown as a significant step forward toward making a fusion power plant based on ICF. NIF is the world’s largest laser, delivering 1.8 MJ of energy, with a peak power greater than 500 TW. NIF is actively striving toward the goal of fusion energy. Other uses for NIF are discussed.

  15. Confinement & Stability in MAST

    NASA Astrophysics Data System (ADS)

    Akers, Rob

    2001-10-01

    Transition to H-mode has been achieved in the MAST spherical tokamak (ST) for both ohmically and neutral beam heated plasmas (P_NBI ~ 0.5-1.5MW), resulting in double-null diverted discharges containing both regular and irregular edge localised modes (ELMs). The observed L-H power threshold is ~10 times higher than predicted by established empirical scalings. L-H transition in MAST is accompanied by a sharp increase in edge density gradient, the efficient conversion of internal electron Bernstein waves into free space waves, the onset and saturation of edge poloidal rotation and a marked decrease in turbulence. During ELM free periods, a reduction in outboard power deposition width is observed using a Langmuir probe array. A novel divertor structure has been installed to counter the resulting increase in target heat-flux by applying a toroidally varying potential to the divertor plasma, theory suggesting that convective broadening of the scrape off layer will take place. Global confinement in H-mode is found to routinely exceed the international IPB(y,2) scaling, even for discharges approaching the Greenwald density. In an attempt to further extend the density range (densities in excess of Greenwald having been achieved for plasma currents up to 0.8MA) a multi-pellet injector has been installed at the low-field-side. In addition, high field side fuelling can be supplied via a gas-feed located at the centre-column mid-plane, this technique having been found to significantly enhance H-mode accessibility and quality. A range of stability issues will be discussed, including vertical displacement events, the rich variety of high frequency MHD seen in MAST and the physics of the Neoclassical Tearing Mode. This work was funded by the UK Department of Trade and Industry and by EURATOM. The NBI equipment is on loan from ORNL and the pellet injector was provided by FOM.

  16. Psychopathological effects of solitary confinement.

    PubMed

    Grassian, S

    1983-11-01

    Psychopathological reactions to solitary confinement were extensively described by nineteenth-century German clinicians. In the United States there have been several legal challenges to the use of solitary confinement, based on allegations that it may have serious psychiatric consequences. The recent medical literature on this subject has been scarce. The author describes psychiatric symptoms that appeared in 14 inmates exposed to periods of increased social isolation and sensory restriction in solitary confinement and asserts that these symptoms form a major, clinically distinguishable psychiatric syndrome. PMID:6624990

  17. ITER EDA design confinement capability

    NASA Astrophysics Data System (ADS)

    Uckan, N. A.

    Major device parameters for ITER-EDA and CDA are given in this paper. Ignition capability of the EDA (and CDA) operational scenarios is evaluated using both the 1 1/2-D time-dependent transport simulations and 0-D global models under different confinement ((chi((gradient)(T)(sub e)(sub crit)), empirical global energy confinement scalings, chi(empirical), etc.) assumptions. Results from some of these transport simulations and confinement assessments are summarized in and compared with the ITER CDA results.

  18. Differentiability of correlations in realistic quantum mechanics

    SciTech Connect

    Cabrera, Alejandro; Faria, Edson de; Pujals, Enrique; Tresser, Charles

    2015-09-15

    We prove a version of Bell’s theorem in which the locality assumption is weakened. We start by assuming theoretical quantum mechanics and weak forms of relativistic causality and of realism (essentially the fact that observable values are well defined independently of whether or not they are measured). Under these hypotheses, we show that only one of the correlation functions that can be formulated in the framework of the usual Bell theorem is unknown. We prove that this unknown function must be differentiable at certain angular configuration points that include the origin. We also prove that, if this correlation is assumed to be twice differentiable at the origin, then we arrive at a version of Bell’s theorem. On the one hand, we are showing that any realistic theory of quantum mechanics which incorporates the kinematic aspects of relativity must lead to this type of rough correlation function that is once but not twice differentiable. On the other hand, this study brings us a single degree of differentiability away from a relativistic von Neumann no hidden variables theorem.

  19. Differentiability of correlations in realistic quantum mechanics

    NASA Astrophysics Data System (ADS)

    Cabrera, Alejandro; de Faria, Edson; Pujals, Enrique; Tresser, Charles

    2015-09-01

    We prove a version of Bell's theorem in which the locality assumption is weakened. We start by assuming theoretical quantum mechanics and weak forms of relativistic causality and of realism (essentially the fact that observable values are well defined independently of whether or not they are measured). Under these hypotheses, we show that only one of the correlation functions that can be formulated in the framework of the usual Bell theorem is unknown. We prove that this unknown function must be differentiable at certain angular configuration points that include the origin. We also prove that, if this correlation is assumed to be twice differentiable at the origin, then we arrive at a version of Bell's theorem. On the one hand, we are showing that any realistic theory of quantum mechanics which incorporates the kinematic aspects of relativity must lead to this type of rough correlation function that is once but not twice differentiable. On the other hand, this study brings us a single degree of differentiability away from a relativistic von Neumann no hidden variables theorem.

  20. Real-time realistic skin translucency.

    PubMed

    Jimenez, Jorge; Whelan, David; Sundstedt, Veronica; Gutierrez, Diego

    2010-01-01

    Diffusion theory allows the production of realistic skin renderings. The dipole and multipole models allow for solving challenging diffusion-theory equations efficiently. By using texture-space diffusion, a Gaussian-based approximation, and programmable graphics hardware, developers can create real-time, photorealistic skin renderings. Performing this diffusion in screen space offers advantages that make diffusion approximation practical in scenarios such as games, where having the best possible performance is crucial. However, unlike the texture-space counterpart, the screen-space approach can't simulate transmittance of light through thin geometry; it yields unrealistic results in those cases. A new transmittance algorithm turns the screen-space approach into an efficient global solution, capable of simulating both reflectance and transmittance of light through a multilayered skin model. The transmittance calculations are derived from physical equations, which are implemented through simple texture access. The method performs in real time, requiring no additional memory usage and only minimal additional processing power and memory bandwidth. Despite its simplicity, this practical model manages to reproduce the look of images rendered with other techniques (both offline and real time) such as photon mapping or diffusion approximation. PMID:20650726

  1. Alveolar mechanics using realistic acinar models

    NASA Astrophysics Data System (ADS)

    Kumar, Haribalan; Lin, Ching-Long; Tawhai, Merryn H.; Hoffman, Eric A.

    2009-11-01

    Accurate modeling of the mechanics in terminal airspaces of the lung is desirable for study of particle transport and pathology. The flow in the acinar region is traditionally studied by employing prescribed boundary conditions to represent rhythmic breathing and volumetric expansion. Conventional models utilize simplified spherical or polygonal units to represent the alveolar duct and sac. Accurate prediction of flow and transport characteristics may require geometries reconstructed from CT-based images and serve to understand the importance of physiologically realistic representation of the acinus. In this effort, we present a stabilized finite element framework, supplemented with appropriate boundary conditions at the alveolar mouth and septal borders for simulation of the alveolar mechanics and the resulting airflow. Results of material advection based on Lagrangian tracking are presented to complete the study of transport and compare the results with simplified acinar models. The current formulation provides improved understanding and realization of a dynamic framework for parenchymal mechanics with incorporation of alveolar pressure and traction stresses.

  2. Realistic calculation of the hep astrophysical factor

    SciTech Connect

    L.E. Marcucci; R. Schiavilla; M. Viviani; A. Kievsky; S. Rosati

    2000-03-01

    The astrophysical factor for the proton weak capture on {sup 3}He is calculated with correlated-hyperspherical-harmonics bound and continuum wave functions corresponding to a realistic Hamiltonian consisting of the Argonne {nu}{sub 18} two-nucleon and Urbana-IX three-nucleon interactions. The nuclear weak charge and current operators have vector and axial-vector components, that include one- and many-body terms. All possible multipole transitions connecting any of the p{sup 3}He S- and P-wave channels to the {sup 4}He bound state are considered. The S-factor at a p{sup 3}He center-of-mass energy of 10 keV, close to the Gamow-peak energy, is predicted to be 10.1 x 10{sup {minus}20} keV b, a factor of five larger than the standard-solar-model value. The P-wave transitions are found to be important, contributing about 40 % of the calculated S-factor.

  3. Comparing Realistic Subthalamic Nucleus Neuron Models

    NASA Astrophysics Data System (ADS)

    Njap, Felix; Claussen, Jens C.; Moser, Andreas; Hofmann, Ulrich G.

    2011-06-01

    The mechanism of action of clinically effective electrical high frequency stimulation is still under debate. However, recent evidence points at the specific activation of GABA-ergic ion channels. Using a computational approach, we analyze temporal properties of the spike trains emitted by biologically realistic neurons of the subthalamic nucleus (STN) as a function of GABA-ergic synaptic input conductances. Our contribution is based on a model proposed by Rubin and Terman and exhibits a wide variety of different firing patterns, silent, low spiking, moderate spiking and intense spiking activity. We observed that most of the cells in our network turn to silent mode when we increase the GABAA input conductance above the threshold of 3.75 mS/cm2. On the other hand, insignificant changes in firing activity are observed when the input conductance is low or close to zero. We thus reproduce Rubin's model with vanishing synaptic conductances. To quantitatively compare spike trains from the original model with the modified model at different conductance levels, we apply four different (dis)similarity measures between them. We observe that Mahalanobis distance, Victor-Purpura metric, and Interspike Interval distribution are sensitive to different firing regimes, whereas Mutual Information seems undiscriminative for these functional changes.

  4. Alternative approaches to plasma confinement

    NASA Technical Reports Server (NTRS)

    Roth, J. R.

    1978-01-01

    The paper discusses 20 plasma confinement schemes each representing an alternative to the tokamak fusion reactor. Attention is given to: (1) tokamak-like devices (TORMAC, Topolotron, and the Extrap concept), (2) stellarator-like devices (Torsatron and twisted-coil stellarators), (3) mirror machines (Astron and reversed-field devices, the 2XII B experiment, laser-heated solenoids, the LITE experiment, the Kaktus-Surmac concept), (4) bumpy tori (hot electron bumpy torus, toroidal minimum-B configurations), (5) electrostatically assisted confinement (electrostatically stuffed cusps and mirrors, electrostatically assisted toroidal confinement), (6) the Migma concept, and (7) wall-confined plasmas. The plasma parameters of the devices are presented and the advantages and disadvantages of each are listed.

  5. Tandem mirror plasma confinement apparatus

    DOEpatents

    Fowler, T. Kenneth

    1978-11-14

    Apparatus and method for confining a plasma in a center mirror cell by use of two end mirror cells as positively charged end stoppers to minimize leakage of positive particles from the ends of the center mirror cell.

  6. Alternative approaches to plasma confinement

    NASA Technical Reports Server (NTRS)

    Roth, J. R.

    1977-01-01

    The potential applications of fusion reactors, the desirable properties of reactors intended for various applications, and the limitations of the Tokamak concept are discussed. The principles and characteristics of 20 distinct alternative confinement concepts are described, each of which may be an alternative to the Tokamak. The devices are classed as Tokamak-like, stellarator-like, mirror machines, bumpy tori, electrostatically assisted, migma concept, and wall-confined plasma.

  7. Solvent cavitation under solvophobic confinement.

    PubMed

    Ashbaugh, Henry S

    2013-08-14

    The stability of liquids under solvophobic confinement can tip in favor of the vapor phase, nucleating a liquid-to-vapor phase transition that induces attractive forces between confining surfaces. In the case of water adjacent to hydrophobic surfaces, experimental and theoretical evidence support confinement-mediated evaporation stabilization of biomolecular and colloidal assemblies. The macroscopic thermodynamic theory of cavitation under confinement establishes the connection between the size of the confining surfaces, interfacial free energies, and bulk solvent pressure with the critical evaporation separation and interfacial forces. While molecular simulations have confirmed the broad theoretical trends, a quantitative comparison based on independent measurements of the interfacial free energies and liquid-vapor coexistence properties has, to the best of our knowledge, not yet been performed. To overcome the challenges of simulating a large number of systems to validate scaling predictions for a three-dimensional fluid, we simulate both the forces and liquid-vapor coexistence properties of a two-dimensional Lennard-Jones fluid confined between solvophobic plates over a range of plate sizes and reservoir pressures. Our simulations quantitatively agree with theoretical predictions for solvent-mediated forces and critical evaporation separations once the length dependence of the solvation free energy of an individual confining plate is taken into account. The effective solid-liquid line tension length dependence results from molecular scale correlations for solvating microscopic plates and asymptotically decays to the macroscopic value for plates longer than 150 solvent diameters. The success of the macroscopic thermodynamic theory at describing two-dimensional liquids suggests application to surfactant monolayers to experimentally confirm confinement-mediated cavitation. PMID:23947875

  8. A realistic molecular model of cement hydrates

    PubMed Central

    Pellenq, Roland J.-M.; Kushima, Akihiro; Shahsavari, Rouzbeh; Van Vliet, Krystyn J.; Buehler, Markus J.; Yip, Sidney; Ulm, Franz-Josef

    2009-01-01

    Despite decades of studies of calcium-silicate-hydrate (C-S-H), the structurally complex binder phase of concrete, the interplay between chemical composition and density remains essentially unexplored. Together these characteristics of C-S-H define and modulate the physical and mechanical properties of this “liquid stone” gel phase. With the recent determination of the calcium/silicon (C/S = 1.7) ratio and the density of the C-S-H particle (2.6 g/cm3) by neutron scattering measurements, there is new urgency to the challenge of explaining these essential properties. Here we propose a molecular model of C-S-H based on a bottom-up atomistic simulation approach that considers only the chemical specificity of the system as the overriding constraint. By allowing for short silica chains distributed as monomers, dimers, and pentamers, this C-S-H archetype of a molecular description of interacting CaO, SiO2, and H2O units provides not only realistic values of the C/S ratio and the density computed by grand canonical Monte Carlo simulation of water adsorption at 300 K. The model, with a chemical composition of (CaO)1.65(SiO2)(H2O)1.75, also predicts other essential structural features and fundamental physical properties amenable to experimental validation, which suggest that the C-S-H gel structure includes both glass-like short-range order and crystalline features of the mineral tobermorite. Additionally, we probe the mechanical stiffness, strength, and hydrolytic shear response of our molecular model, as compared to experimentally measured properties of C-S-H. The latter results illustrate the prospect of treating cement on equal footing with metals and ceramics in the current application of mechanism-based models and multiscale simulations to study inelastic deformation and cracking. PMID:19805265

  9. Realistic Detectability of Close Interstellar Comets

    NASA Astrophysics Data System (ADS)

    Cook, Nathaniel V.; Ragozzine, Darin; Granvik, Mikael; Stephens, Denise C.

    2016-07-01

    During the planet formation process, billions of comets are created and ejected into interstellar space. The detection and characterization of such interstellar comets (ICs) (also known as extra-solar planetesimals or extra-solar comets) would give us in situ information about the efficiency and properties of planet formation throughout the galaxy. However, no ICs have ever been detected, despite the fact that their hyperbolic orbits would make them readily identifiable as unrelated to the solar system. Moro-Martín et al. have made a detailed and reasonable estimate of the properties of the IC population. We extend their estimates of detectability with a numerical model that allows us to consider “close” ICs, e.g., those that come within the orbit of Jupiter. We include several constraints on a “detectable” object that allow for realistic estimates of the frequency of detections expected from the Large Synoptic Survey Telescope (LSST) and other surveys. The influence of several of the assumed model parameters on the frequency of detections is explored in detail. Based on the expectation from Moro-Martín et al., we expect that LSST will detect 0.001–10 ICs during its nominal 10 year lifetime, with most of the uncertainty from the unknown number density of small (nuclei of ∼0.1–1 km) ICs. Both asteroid and comet cases are considered, where the latter includes various empirical prescriptions of brightening. Using simulated LSST-like astrometric data, we study the problem of orbit determination for these bodies, finding that LSST could identify their orbits as hyperbolic and determine an ephemeris sufficiently accurate for follow-up in about 4–7 days. We give the hyperbolic orbital parameters of the most detectable ICs. Taking the results into consideration, we give recommendations to future searches for ICs.

  10. Realistic Detectability of Close Interstellar Comets

    NASA Astrophysics Data System (ADS)

    Cook, Nathaniel V.; Ragozzine, Darin; Granvik, Mikael; Stephens, Denise C.

    2016-07-01

    During the planet formation process, billions of comets are created and ejected into interstellar space. The detection and characterization of such interstellar comets (ICs) (also known as extra-solar planetesimals or extra-solar comets) would give us in situ information about the efficiency and properties of planet formation throughout the galaxy. However, no ICs have ever been detected, despite the fact that their hyperbolic orbits would make them readily identifiable as unrelated to the solar system. Moro-Martín et al. have made a detailed and reasonable estimate of the properties of the IC population. We extend their estimates of detectability with a numerical model that allows us to consider “close” ICs, e.g., those that come within the orbit of Jupiter. We include several constraints on a “detectable” object that allow for realistic estimates of the frequency of detections expected from the Large Synoptic Survey Telescope (LSST) and other surveys. The influence of several of the assumed model parameters on the frequency of detections is explored in detail. Based on the expectation from Moro-Martín et al., we expect that LSST will detect 0.001–10 ICs during its nominal 10 year lifetime, with most of the uncertainty from the unknown number density of small (nuclei of ˜0.1–1 km) ICs. Both asteroid and comet cases are considered, where the latter includes various empirical prescriptions of brightening. Using simulated LSST-like astrometric data, we study the problem of orbit determination for these bodies, finding that LSST could identify their orbits as hyperbolic and determine an ephemeris sufficiently accurate for follow-up in about 4–7 days. We give the hyperbolic orbital parameters of the most detectable ICs. Taking the results into consideration, we give recommendations to future searches for ICs.

  11. A Review of Quantum Confinement

    SciTech Connect

    Connerade, Jean-Patrick

    2009-12-03

    A succinct history of the Confined Atom problem is presented. The hydrogen atom confined to the centre of an impenetrable sphere counts amongst the exactly soluble problems of physics, alongside much more noted exact solutions such as Black Body Radiation and the free Hydrogen atom in absence of any radiation field. It shares with them the disadvantage of being an idealisation, while at the same time encapsulating in a simple way particular aspects of physical reality. The problem was first formulated by Sommerfeld and Welker - henceforth cited as SW - in connection with the behaviour of atoms at very high pressures, and the solution was published on the occasion of Pauli's 60th birthday celebration. At the time, it seemed that there was not much other connection with physical reality beyond a few simple aspects connected to the properties of atoms in solids, for which more appropriate models were soon developed. Thus, confined atoms attracted little attention until the advent of the metallofullerene, which provided the first example of a confined atom with properties quite closely related to those originally considered by SW. Since then, the problem has received much more attention, and many more new features of quantum confinement, quantum compression, the quantum Faraday cage, electronic reorganisation, cavity resonances, etc have been described, which are relevant to real systems. Also, a number of other situations have been uncovered experimentally to which quantum confinement is relevant. Thus, studies of the confined atom are now more numerous, and have been extended both in terms of the models used and the systems to which they can be applied. Connections to thermodynamics are explored through the properties of a confined two-level atom adapted from Einstein's celebrated model, and issues of dynamical screening of electromagnetic radiation by the confining shell are discussed in connection with the Faraday cage produced by a confining conducting shell. The

  12. CORRELATIONS IN CONFINED QUANTUM PLASMAS

    SciTech Connect

    DUFTY J W

    2012-01-11

    This is the final report for the project 'Correlations in Confined Quantum Plasmas', NSF-DOE Partnership Grant DE FG02 07ER54946, 8/1/2007 - 7/30/2010. The research was performed in collaboration with a group at Christian Albrechts University (CAU), Kiel, Germany. That collaboration, almost 15 years old, was formalized during the past four years under this NSF-DOE Partnership Grant to support graduate students at the two institutions and to facilitate frequent exchange visits. The research was focused on exploring the frontiers of charged particle physics evolving from new experimental access to unusual states associated with confinement. Particular attention was paid to combined effects of quantum mechanics and confinement. A suite of analytical and numerical tools tailored to the specific inquiry has been developed and employed

  13. Structure and Dynamics of Ionic Liquids Confined in Amorphous Porous Chalcogenides.

    PubMed

    Ori, Guido; Massobrio, Carlo; Pradel, Annie; Ribes, Michel; Coasne, Benoit

    2015-06-23

    Besides the abundant literature on ionic liquids in porous silica and carbon, the confinement of such intriguing liquids in porous chalcogenides has received very little attention. Here, molecular simulation is employed to study the structural and dynamical properties of a typical ionic liquid confined in a realistic molecular model of amorphous chalcogenide with various pore sizes and surface chemistries. Using molecular dynamics in the isobaric-isothermal (NPT) ensemble, we consider confinement conditions relevant to real samples. Both the structure and self-dynamics of the confined phase are found to depend on the surface-to-volume ratio of the host confining material. Consequently, most properties of the confined ionic liquid can be written as a linear combination of surface and bulk-like contributions, arising from the ions in contact with the surface and the ions in the pore center, respectively. On the other hand, collective dynamical properties such as the ionic conductivity remain close to their bulk counterpart and almost insensitive to pore size and surface chemistry. These results, which are in fair agreement with available experimental data, provide a basis for the development of novel applications using hybrid organic-inorganic solids consisting of ionic liquids confined in porous chalcogenides. PMID:26030830

  14. Confined Visible Optical Tamm States

    NASA Astrophysics Data System (ADS)

    Feng, F.; Ouaret, K.; Portalupi, S.; Lafosse, X.; Nasilovski, M.; de Marcillac, W. Daney; Frigerio, J.-M.; Schwob, C.; Dubertret, B.; Maître, A.; Senellart, P.; Coolen, L.

    2016-05-01

    Optical Tamm states are two-dimensional (2D) electromagnetic modes propagating at the interface between a Bragg mirror and a metallic film. When a thin (a few tens of nm) metallic micron-radius disk is deposited on a Bragg mirror, optical Tamm states can be confined below the disk surface, creating a Tamm-states cavity. We describe here the photoluminescence properties of colloidal semiconductor nanocrystals embedded in a Tamm cavity. Tamm states confinement effects are demonstrated and analysed as a function of the disk diameter, and compared with finite-elements simulations.

  15. CONFINEMENT OF HIGH TEMPERATURE PLASMA

    DOEpatents

    Koenig, H.R.

    1963-05-01

    The confinement of a high temperature plasma in a stellarator in which the magnetic confinement has tended to shift the plasma from the center of the curved, U-shaped end loops is described. Magnetic means are provided for counteracting this tendency of the plasma to be shifted away from the center of the end loops, and in one embodiment this magnetic means is a longitudinally extending magnetic field such as is provided by two sets of parallel conductors bent to follow the U-shaped curvature of the end loops and energized oppositely on the inside and outside of this curvature. (AEC)

  16. Building solids inside nano-space: from confined amorphous through confined solvate to confined 'metastable' polymorph.

    PubMed

    Nartowski, K P; Tedder, J; Braun, D E; Fábián, L; Khimyak, Y Z

    2015-10-14

    The nanocrystallisation of complex molecules inside mesoporous hosts and control over the resulting structure is a significant challenge. To date the largest organic molecule crystallised inside the nano-pores is a known pharmaceutical intermediate - ROY (259.3 g mol(-1)). In this work we demonstrate smart manipulation of the phase of a larger confined pharmaceutical - indomethacin (IMC, 357.8 g mol(-1)), a substance with known conformational flexibility and complex polymorphic behaviour. We show the detailed structural analysis and the control of solid state transformations of encapsulated molecules inside the pores of mesoscopic cellular foam (MCF, pore size ca. 29 nm) and controlled pore glass (CPG, pore size ca. 55 nm). Starting from confined amorphous IMC we drive crystallisation into a confined methanol solvate, which upon vacuum drying leads to the stabilised rare form V of IMC inside the MCF host. In contrast to the pure form, encapsulated form V does not transform into a more stable polymorph upon heating. The size of the constraining pores and the drug concentration within the pores determine whether the amorphous state of the drug is stabilised or it recrystallises into confined nanocrystals. The work presents, in a critical manner, an application of complementary techniques (DSC, PXRD, solid-state NMR, N2 adsorption) to confirm unambiguously the phase transitions under confinement and offers a comprehensive strategy towards the formation and control of nano-crystalline encapsulated organic solids. PMID:26280634

  17. Optimizing Stellarators for Energetic Particle Confinement using BEAMS3D

    NASA Astrophysics Data System (ADS)

    Bolgert, Peter; Drevlak, Michael; Lazerson, Sam; Gates, David; White, Roscoe

    2015-11-01

    Energetic particle (EP) loss has been called the ``Achilles heel of stellarators,'' (Helander, Rep. Prog. Phys. 77 087001 (2014)) and there is a great need for magnetic configurations with improved EP confinement. In this study we utilize a newly developed capability of the stellarator optimization code STELLOPT: the ability to optimize EP confinement via an interface with guiding center code BEAMS3D (McMillan et al., Plasma Phys. Control. Fusion 56, 095019 (2014)). Using this new tool, optimizations of the W7-X experiment and ARIES-CS reactor are performed where the EP loss fraction is one of many target functions to be minimized. In W7-X, we simulate the experimental NBI system using realistic beam geometry and beam deposition physics. The goal is to find configurations with improved neutral beam deposition and energetic particle confinement. These calculations are compared to previous studies of W7-X NBI deposition. In ARIES-CS, we launch 3.5 MeV alpha particles from a near-axis flux surface using a uniform grid in toroidal and poloidal angle. As these particles are born from D-T reactions, we consider an isotropic distribution in velocity space. This research is supported by DoE Contract Number DE-AC02-09CH11466.

  18. The use and limitation of realistic evaluation as a tool for evidence-based practice: a critical realist perspective.

    PubMed

    Porter, Sam; O'Halloran, Peter

    2012-03-01

    The use and limitation of realistic evaluation as a tool for evidence-based practice: a critical realist perspective In this paper, we assess realistic evaluation's articulation with evidence-based practice (EBP) from the perspective of critical realism. We argue that the adoption by realistic evaluation of a realist causal ontology means that it is better placed to explain complex healthcare interventions than the traditional method used by EBP, the randomized controlled trial (RCT). However, we do not conclude from this that the use of RCTs is without merit, arguing that it is possible to use both methods in combination under the rubric of realist theory. More negatively, we contend that the rejection of critical theory and utopianism by realistic evaluation in favour of the pragmatism of piecemeal social engineering means that it is vulnerable to accusations that it promotes technocratic interpretations of human problems. We conclude that, insofar as realistic evaluation adheres to the ontology of critical realism, it provides a sound contribution to EBP, but insofar as it rejects the critical turn of Bhaskar's realism, it replicates the technocratic tendencies inherent in EBP. PMID:22212367

  19. Limiting Spectra from Confining Potentials.

    ERIC Educational Resources Information Center

    Nieto, Michael Martin; Simmons, L. M., Jr.

    1979-01-01

    The author explains that, for confining potentials and large quantum numbers, the bound-state energies rise more rapidly as a function of n the more rapidly the potential rises with distance. However, the spectrum can rise no faster than n squared in the nonrelativistic case, or n in the relativistic case. (Author/GA)

  20. Dislocation dynamics in confined geometry

    NASA Astrophysics Data System (ADS)

    Gómez-García, D.; Devincre, B.; Kubin, L.

    1999-05-01

    A simulation of dislocation dynamics has been used to calculate the critical stress for a threading dislocation moving in a confined geometry. The optimum conditions for conducting simulations in systems of various sizes, down to the nanometer range, are defined. The results are critically compared with the available theoretical and numerical estimates for the problem of dislocation motion in capped layers.

  1. Dirac equations with confining potentials

    NASA Astrophysics Data System (ADS)

    Noble, J. H.; Jentschura, U. D.

    2015-01-01

    This paper is devoted to a study of relativistic eigenstates of Dirac particles which are simultaneously bound by a static Coulomb potential and added linear confining potentials. Under certain conditions, despite the addition of radially symmetric, linear confining potentials, specific bound-state energies surprisingly preserve their exact Dirac-Coulomb values. The generality of the "preservation mechanism" is investigated. To this end, a Foldy-Wouthuysen transformation is used to calculate the corrections to the spin-orbit coupling induced by the linear confining potentials. We find that the matrix elements of the effective operators obtained from the scalar, and time-like confining potentials mutually cancel for specific ratios of the prefactors of the effective operators, which must be tailored to the preservation mechanism. The result of the Foldy-Wouthuysen transformation is used to verify that the preservation is restricted (for a given Hamiltonian) to only one reference state, rather than traceable to a more general relationship among the obtained effective low-energy operators. The results derived from the nonrelativistic effective operators are compared to the fully relativistic radial Dirac equations. Furthermore, we show that the preservation mechanism does not affect antiparticle (negative-energy) states.

  2. Mirror Confinement Systems: project summaries

    SciTech Connect

    Not Available

    1980-07-01

    This report contains descriptions of the projects supported by the Mirror Confinement Systems (MCS) Division of the Office of Fusion Energy. The individual project summaries were prepared by the principal investigators, in collaboration with MCS staff office, and include objectives and milestones for each project. In addition to project summaries, statements of Division objectives and budget summaries are also provided.

  3. Momentum Confinement at Low Torque

    SciTech Connect

    Solomon, W M; Burrell, K H; deGrassie, J S; Budny, R; Groebner, R J; Heidbrink, W W; Kinsey, J E; Kramer, G J; Makowski, M A; Mikkelsen, D; Nazikian, R; Petty, C C; Politzer, P A; Scott, S D; Van Zeeland, M A; Zarnstorff, M C

    2007-06-26

    Momentum confinement was investigated on DIII-D as a function of applied neutral beam torque at constant normalized {beta}{sub N}, by varying the mix of co (parallel to the plasma current) and counter neutral beams. Under balanced neutral beam injection (i.e. zero total torque to the plasma), the plasma maintains a significant rotation in the co-direction. This 'intrinsic' rotation can be modeled as being due to an offset in the applied torque (i.e. an 'anomalous torque'). This anomalous torque appears to have a magnitude comparable to one co-neutral beam source. The presence of such an anomalous torque source must be taken into account to obtain meaningful quantities describing momentum transport, such as the global momentum confinement time and local diffusivities. Studies of the mechanical angular momentum in ELMing H-mode plasmas with elevated q{sub min} show that the momentum confinement time improves as the torque is reduced. In hybrid plasmas, the opposite effect is observed, namely that momentum confinement improves at high torque/rotation. The relative importance of E x B shearing between the two is modeled using GLF23 and may suggest a possible explanation.

  4. Effects of realistic tensor force on nuclear structure

    SciTech Connect

    Nakada, H.

    2012-10-20

    First-order tensor-force effects on nuclear structure are investigated in the self-consistent mean-field and RPA calculations with the M3Y-type semi-realistic interactions, which contain the realistic tensor force. The tensor force plays a key role in Z- or N-dependence of the shell structure, and in transitions involving spin degrees-of-freedom. It is demonstrated that the semi-realistic interactions successfully describe the N-dependence of the shell structure in the proton-magic nuclei (e.g. Ca and Sn), and the magnetic transitions (e.g. M1 transition in {sup 208}Pb).

  5. Sociology of pharmaceuticals development and regulation: a realist empirical research programme.

    PubMed

    Abraham, John

    2008-09-01

    A realist conceptualization of interests is proposed in opposition to the fashionable view that interests, objectivity and reality are merely social constructs, and that sociological analyses should be confined to discourse, actor-networks and micro-contextual practices. The objective interests of pharmaceutical companies in profit-maximization, and of patients/public health in the optimisation of drugs' benefit-risk ratios, can be empirically validated. The relationship between those interests and pharmaceutical regulation is best characterised by 'neo-liberal corporate bias' at the macro- and meso-levels. How such bias manifests itself at the micro-social level of science-based pharmaceutical testing and regulatory decision making is examined using a realist sociology of scientific knowledge, which appreciates that assessment of the validity of techno-scientific knowledge claims is essential for their sociological explanation. Commercial interests are shown to have biased science away from the interests of public health, in favour of industry. International comparisons of drug regulation demonstrate that drug injuries are not necessarily an inevitable by-product of pharmaceutical progress because some countries have fewer drug safety problems than others. Similarly, the lowering of techno-scientific standards for drug safety testing is not an inevitable cost of faster development of therapeutically valuable medicines, but a consequence of the internationalization of neo-liberal corporate bias. PMID:18761508

  6. Toward a realistic low-field SSC lattice

    SciTech Connect

    Heifets, S.

    1985-10-01

    Three six-fold lattices for 3 T superferric SSC have been generated at TAC. The program based on the first order canonical transformation was used to compare lattices. On this basis the realistic race-track lattices were generated.

  7. Student Work Experience: A Realistic Approach to Merchandising Education.

    ERIC Educational Resources Information Center

    Horridge, Patricia; And Others

    1980-01-01

    Relevant and realistic experiences are needed to prepare the student for a future career. Addresses the results of a survey of colleges and universities in the United States in regard to their student work experience (SWE) in fashion merchandising. (Author)

  8. Enzymatic reactions in confined environments

    NASA Astrophysics Data System (ADS)

    Küchler, Andreas; Yoshimoto, Makoto; Luginbühl, Sandra; Mavelli, Fabio; Walde, Peter

    2016-05-01

    Within each biological cell, surface- and volume-confined enzymes control a highly complex network of chemical reactions. These reactions are efficient, timely, and spatially defined. Efforts to transfer such appealing features to in vitro systems have led to several successful examples of chemical reactions catalysed by isolated and immobilized enzymes. In most cases, these enzymes are either bound or adsorbed to an insoluble support, physically trapped in a macromolecular network, or encapsulated within compartments. Advanced applications of enzymatic cascade reactions with immobilized enzymes include enzymatic fuel cells and enzymatic nanoreactors, both for in vitro and possible in vivo applications. In this Review, we discuss some of the general principles of enzymatic reactions confined on surfaces, at interfaces, and inside small volumes. We also highlight the similarities and differences between the in vivo and in vitro cases and attempt to critically evaluate some of the necessary future steps to improve our fundamental understanding of these systems.

  9. Influence of confinement on thermodiffusion

    NASA Astrophysics Data System (ADS)

    Hannaoui, Rachid; Galliero, Guillaume; Hoang, Hai; Boned, Christian

    2013-09-01

    This work focuses on a possible influence of a nanoporous medium on the thermodiffusion of a fluid "isotopic" mixture. To do so, we performed molecular dynamics simulations of confined Lennard-Jones binary equimolar mixtures using grand-canonical like and non-equilibrium approaches in sub- and super-critical conditions. The study was conducted in atomistic slit pore of three adsorbent natures for various widths (from 5 to 35 times the size of a molecule). The simulation results indicate that for all thermodynamic conditions and whatever the pore characteristics, the confinement has a negligible effect on the thermal diffusion factor/Soret coefficient. However, when considered separately, the mass diffusion and thermodiffusion coefficients have been found to be largely influenced by the pore characteristics. These two coefficients decrease noticeably when adsorption is stronger and pore width smaller, a behavior that is consistent with a simple hydrodynamic explanation.

  10. Enzymatic reactions in confined environments.

    PubMed

    Küchler, Andreas; Yoshimoto, Makoto; Luginbühl, Sandra; Mavelli, Fabio; Walde, Peter

    2016-05-01

    Within each biological cell, surface- and volume-confined enzymes control a highly complex network of chemical reactions. These reactions are efficient, timely, and spatially defined. Efforts to transfer such appealing features to in vitro systems have led to several successful examples of chemical reactions catalysed by isolated and immobilized enzymes. In most cases, these enzymes are either bound or adsorbed to an insoluble support, physically trapped in a macromolecular network, or encapsulated within compartments. Advanced applications of enzymatic cascade reactions with immobilized enzymes include enzymatic fuel cells and enzymatic nanoreactors, both for in vitro and possible in vivo applications. In this Review, we discuss some of the general principles of enzymatic reactions confined on surfaces, at interfaces, and inside small volumes. We also highlight the similarities and differences between the in vivo and in vitro cases and attempt to critically evaluate some of the necessary future steps to improve our fundamental understanding of these systems. PMID:27146955

  11. Confinement from spontaneous breaking of scale symmetry

    NASA Astrophysics Data System (ADS)

    Gaete, Patricio; Guendelman, Eduardo

    2006-09-01

    We show that one can obtain naturally the confinement of static charges from the spontaneous symmetry breaking of scale invariance in a gauge theory. At the classical level a confining force is obtained and at the quantum level, using a gauge invariant but path-dependent variables formalism, the Cornell confining potential is explicitly obtained. Our procedure answers completely to the requirements by 't Hooft for "perturbative confinement".

  12. Inertial-confinement-fusion targets

    SciTech Connect

    Hendricks, C.D.

    1981-11-16

    Inertial confinement fusion (ICF) targets are made as simple flat discs, as hollow shells or as complicated multilayer structures. Many techniques have been devised for producing the targets. Glass and metal shells are made by using drop and bubble techniques. Solid hydrogen shells are also produced by adapting old methods to the solution of modern problems. Some of these techniques, problems and solutions are discussed. In addition, the applications of many of the techniques to fabrication of ICF targets is presented.

  13. Ion beam inertial confinement target

    DOEpatents

    Bangerter, Roger O.; Meeker, Donald J.

    1985-01-01

    A target for implosion by ion beams composed of a spherical shell of frozen DT surrounded by a low-density, low-Z pusher shell seeded with high-Z material, and a high-density tamper shell. The target has various applications in the inertial confinement technology. For certain applications, if desired, a low-density absorber shell may be positioned intermediate the pusher and tamper shells.

  14. Confinement from constant field condensates

    NASA Astrophysics Data System (ADS)

    Gaete, Patricio; Guendelman, Eduardo; Spallucci, Euro

    2007-01-01

    For (2 + 1)- and (3 + 1)-dimensional reformulated SU (2) Yang-Mills theory, we compute the interaction potential within the framework of the gauge-invariant but path-dependent variables formalism. This reformulation is due to the presence of a constant gauge field condensate. Our results show that the interaction energy contains a linear term leading to the confinement of static probe charges. This result is equivalent to that of the massive Schwinger model.

  15. Interfacial electrofluidics in confined systems

    PubMed Central

    Tang, Biao; Groenewold, Jan; Zhou, Min; Hayes, Robert A.; Zhou, Guofu (G.F.)

    2016-01-01

    Electrofluidics is a versatile principle that can be used for high speed actuation of liquid interfaces. In most of the applications, the fundamental mechanism of electro-capillary instability plays a crucial role, yet it’s potential richness in confined fluidic layers has not been well addressed. Electrofluidic displays which are comprised of thin pixelated colored films in a range of architectures are excellent systems for studying such phenomena. In this study we show theoretically and experimentally that confinement leads to the generation of a cascade of voltage dependent modes as a result of the electro-capillary instability. In the course of reconciling theory with our experimental data we have observed a number of previously unreported phenomena such as a significant induction time (several milliseconds) prior to film rupture as well as a rupture location not corresponding to the minimum electric field strength in the case of the standard convex water/oil interface used in working devices. These findings are broadly applicable to a wide range of switchable electrofluidic applications and devices having confined liquid films. PMID:27221211

  16. Interfacial electrofluidics in confined systems

    NASA Astrophysics Data System (ADS)

    Tang, Biao; Groenewold, Jan; Zhou, Min; Hayes, Robert A.; Zhou, Guofu (G. F.)

    2016-05-01

    Electrofluidics is a versatile principle that can be used for high speed actuation of liquid interfaces. In most of the applications, the fundamental mechanism of electro-capillary instability plays a crucial role, yet it’s potential richness in confined fluidic layers has not been well addressed. Electrofluidic displays which are comprised of thin pixelated colored films in a range of architectures are excellent systems for studying such phenomena. In this study we show theoretically and experimentally that confinement leads to the generation of a cascade of voltage dependent modes as a result of the electro-capillary instability. In the course of reconciling theory with our experimental data we have observed a number of previously unreported phenomena such as a significant induction time (several milliseconds) prior to film rupture as well as a rupture location not corresponding to the minimum electric field strength in the case of the standard convex water/oil interface used in working devices. These findings are broadly applicable to a wide range of switchable electrofluidic applications and devices having confined liquid films.

  17. Nanoparticle Order through Entropic Confinement

    NASA Astrophysics Data System (ADS)

    Zhang, Ren; Lee, Bongjoon; Stafford, Christopher; Douglas, Jack; Bockstaller, Michael; Karim, Alamgir

    As has been addressed in colloidal science, visual order transitions can be achieved with entropy contributions alone. Herein, entropy-driven ordering of nanoparticle (NP) structures is generated where entropy increase and visual order are achieved simultaneously. We study an ``athermal'' NP-polymer blends where NPs are densely grafted with polymer brush of the same chemical composition as the polymer matrix. Visual order of the NPs is induced by geometrically confining the thin film blends with meso-scale topographic patterns. When the residual layer thickness of the patterned blend films approaches the nanoparticle dimension, exclusive segregation of NPs to less confining imprinted mesa region occurs. This preferential segregation of NPs, defined by partition coefficient K = 0, is attributed to purely entropic penalty, where K denotes the particle density ratio at highly confined residual layer to that at mesa region. We further demonstrate K is fully tunable and even invertible with increasing matrix chain dimension. The associated entropic free energy change (ΔF = - ln K) is calculated to explain NP segregation preference. Accordingly, variation of residual layer thickness and polymer matrix molecule size can both affect NP distribution among patterned thick and thin regions.

  18. Holographic confinement in inhomogeneous backgrounds

    NASA Astrophysics Data System (ADS)

    Marolf, Donald; Wien, Jason

    2016-08-01

    As noted by Witten, compactifying a d-dimensional holographic CFT on an S 1 gives a class of ( d - 1)-dimensional confining theories with gravity duals. The proto-typical bulk solution dual to the ground state is a double Wick rotation of the AdS d+1 Schwarzschild black hole known as the AdS soliton. We generalize such examples by allowing slow variations in the size of the S 1, and thus in the confinement scale. Coefficients governing the second order response of the system are computed for 3 ≤ d ≤ 8 using a derivative expansion closely related to the fluid-gravity correspondence. The primary physical results are that i) gauge-theory flux tubes tend to align orthogonal to gradients and along the eigenvector of the Hessian with the lowest eigenvalue, ii) flux tubes aligned orthogonal to gradients are attracted to gradients for d ≤ 6 but repelled by gradients for d ≥ 7, iii) flux tubes are repelled by regions where the second derivative along the tube is large and positive but are attracted to regions where the eigenvalues of the Hessian are large and positive in directions orthogonal to the tube, and iv) for d > 3, inhomogeneities act to raise the total energy of the confining vacuum above its zeroth order value.

  19. Interfacial electrofluidics in confined systems.

    PubMed

    Tang, Biao; Groenewold, Jan; Zhou, Min; Hayes, Robert A; Zhou, Guofu G F

    2016-01-01

    Electrofluidics is a versatile principle that can be used for high speed actuation of liquid interfaces. In most of the applications, the fundamental mechanism of electro-capillary instability plays a crucial role, yet it's potential richness in confined fluidic layers has not been well addressed. Electrofluidic displays which are comprised of thin pixelated colored films in a range of architectures are excellent systems for studying such phenomena. In this study we show theoretically and experimentally that confinement leads to the generation of a cascade of voltage dependent modes as a result of the electro-capillary instability. In the course of reconciling theory with our experimental data we have observed a number of previously unreported phenomena such as a significant induction time (several milliseconds) prior to film rupture as well as a rupture location not corresponding to the minimum electric field strength in the case of the standard convex water/oil interface used in working devices. These findings are broadly applicable to a wide range of switchable electrofluidic applications and devices having confined liquid films. PMID:27221211

  20. Quantum mechanical solver for confined heterostructure tunnel field-effect transistors

    SciTech Connect

    Verreck, Devin Groeseneken, Guido; Van de Put, Maarten; Sorée, Bart; Magnus, Wim; Verhulst, Anne S.; Collaert, Nadine; Thean, Aaron; Vandenberghe, William G.

    2014-02-07

    Heterostructure tunnel field-effect transistors (HTFET) are promising candidates for low-power applications in future technology nodes, as they are predicted to offer high on-currents, combined with a sub-60 mV/dec subthreshold swing. However, the effects of important quantum mechanical phenomena like size confinement at the heterojunction are not well understood, due to the theoretical and computational difficulties in modeling realistic heterostructures. We therefore present a ballistic quantum transport formalism, combining a novel envelope function approach for semiconductor heterostructures with the multiband quantum transmitting boundary method, which we extend to 2D potentials. We demonstrate an implementation of a 2-band version of the formalism and apply it to study confinement in realistic heterostructure diodes and p-n-i-n HTFETs. For the diodes, both transmission probabilities and current densities are found to decrease with stronger confinement. For the p-n-i-n HTFETs, the improved gate control is found to counteract the deterioration due to confinement.

  1. The visualizable, the representable and the inconceivable: realist and non-realist mathematical models in physics and beyond.

    PubMed

    Plotnitsky, Arkady

    2016-01-13

    The project of this article is twofold. First, it aims to offer a new perspective on, and a new argument concerning, realist and non-realist mathematical models, and differences and affinities between them, using physics as a paradigmatic field of mathematical modelling in science. Most of the article is devoted to this topic. Second, the article aims to explore the implications of this argument for mathematical modelling in other fields, in particular in cognitive psychology and economics. PMID:26621990

  2. Implicit Methods for the Magnetohydrodynamic Description of Magnetically Confined Plasmas

    SciTech Connect

    Jardin, S C

    2010-09-28

    Implicit algorithms are essential for predicting the slow growth and saturation of global instabilities in today’s magnetically confined fusion plasma experiments. Present day algorithms for obtaining implicit solutions to the magnetohydrodynamic (MHD) equations for highly magnetized plasma have their roots in algorithms used in the 1960s and 1970s. However, today’s computers and modern linear and non-linear solver techniques make practical much more comprehensive implicit algorithms than were previously possible. Combining these advanced implicit algorithms with highly accurate spatial representations of the vector fields describing the plasma flow and magnetic fields and with improved methods of calculating anisotropic thermal conduction now makes possible simulations of fusion experiments using realistic values of plasma parameters and actual configuration geometry.

  3. Effect of confinement during cookoff of TATB

    NASA Astrophysics Data System (ADS)

    Hobbs, M. L.; Kaneshige, M. J.

    2014-05-01

    In practical scenarios, cookoff of explosives is a three-dimensional transient phenomenon where the rate limiting reactions may occur either in the condensed or gas phase. The effects of confinement are more dramatic when the rate-limiting reactions occur in the gas phase. Explosives can be self-confined, where the decomposing gases are contained within non-permeable regions of the explosive, or confined by a metal or composite container. In triaminotrinitrobenzene (TATB) based explosives, self-confinement is prevalent in plastic bonded explosives at full density. The time-to-ignition can be delayed by orders of magnitude if the reactive gases leave the confining apparatus. Delays in ignition can also occur when the confining apparatus has excess gas volume or ullage. Understanding the effects of confinement is required to accurately model explosive cookoff at various scales ranging from small laboratory experiments to large real systems.

  4. Realistic real-time outdoor rendering in augmented reality.

    PubMed

    Kolivand, Hoshang; Sunar, Mohd Shahrizal

    2014-01-01

    Realistic rendering techniques of outdoor Augmented Reality (AR) has been an attractive topic since the last two decades considering the sizeable amount of publications in computer graphics. Realistic virtual objects in outdoor rendering AR systems require sophisticated effects such as: shadows, daylight and interactions between sky colours and virtual as well as real objects. A few realistic rendering techniques have been designed to overcome this obstacle, most of which are related to non real-time rendering. However, the problem still remains, especially in outdoor rendering. This paper proposed a much newer, unique technique to achieve realistic real-time outdoor rendering, while taking into account the interaction between sky colours and objects in AR systems with respect to shadows in any specific location, date and time. This approach involves three main phases, which cover different outdoor AR rendering requirements. Firstly, sky colour was generated with respect to the position of the sun. Second step involves the shadow generation algorithm, Z-Partitioning: Gaussian and Fog Shadow Maps (Z-GaF Shadow Maps). Lastly, a technique to integrate sky colours and shadows through its effects on virtual objects in the AR system, is introduced. The experimental results reveal that the proposed technique has significantly improved the realism of real-time outdoor AR rendering, thus solving the problem of realistic AR systems. PMID:25268480

  5. Using polychromatic X-radiography to examine realistic imitation firearms.

    PubMed

    Austin, J C; Day, C R; Kearon, A T; Valussi, S; Haycock, P W

    2008-10-25

    Sections 36-41 of the Violent Crimes Reduction Act (2006), which came into force in England and Wales on 1st October 2007, have placed significant restrictions on the sale and possession of 'realistic imitation firearms'. This legislation attempts to produce a definition of a 'realistic imitation' which clearly differentiates these items from other imitation firearms (which are not covered by the legislation). This paper will go a stage further by demonstrating techniques by which blank firing realistic imitation firearms which may be suitable for illegal conversion to fire live rounds may be differentiated from other less 'suitable' (but visually identical) realistic imitations. The article reports on the use of X-radiography, utilizing the bremsstrahlung of a commercial broad spectrum X-ray source, to identify the differences between alloys constituting the barrels of distinct replica and/or blank firing handguns. The resulting pseudo-signatures are transmission spectra over a range from 20 to 75 kV, taken at 1 kV intervals, which are extracted from stacks of registered, field flattened images. It is shown that it is possible to quantify differences between transmission spectra for components of different realistic imitation fire arms, and apply the results to determine the suitability of particular gun barrels from blank firing imitation firearms for illegal conversion to fire live rounds, or related illegal modifications. PMID:18842365

  6. Realistic modeling of neurons and networks: towards brain simulation

    PubMed Central

    D’Angelo, Egidio; Solinas, Sergio; Garrido, Jesus; Casellato, Claudia; Pedrocchi, Alessandra; Mapelli, Jonathan; Gandolfi, Daniela; Prestori, Francesca

    Summary Realistic modeling is a new advanced methodology for investigating brain functions. Realistic modeling is based on a detailed biophysical description of neurons and synapses, which can be integrated into microcircuits. The latter can, in turn, be further integrated to form large-scale brain networks and eventually to reconstruct complex brain systems. Here we provide a review of the realistic simulation strategy and use the cerebellar network as an example. This network has been carefully investigated at molecular and cellular level and has been the object of intense theoretical investigation. The cerebellum is thought to lie at the core of the forward controller operations of the brain and to implement timing and sensory prediction functions. The cerebellum is well described and provides a challenging field in which one of the most advanced realistic microcircuit models has been generated. We illustrate how these models can be elaborated and embedded into robotic control systems to gain insight into how the cellular properties of cerebellar neurons emerge in integrated behaviors. Realistic network modeling opens up new perspectives for the investigation of brain pathologies and for the neurorobotic field. PMID:24139652

  7. Realistic Real-Time Outdoor Rendering in Augmented Reality

    PubMed Central

    Kolivand, Hoshang; Sunar, Mohd Shahrizal

    2014-01-01

    Realistic rendering techniques of outdoor Augmented Reality (AR) has been an attractive topic since the last two decades considering the sizeable amount of publications in computer graphics. Realistic virtual objects in outdoor rendering AR systems require sophisticated effects such as: shadows, daylight and interactions between sky colours and virtual as well as real objects. A few realistic rendering techniques have been designed to overcome this obstacle, most of which are related to non real-time rendering. However, the problem still remains, especially in outdoor rendering. This paper proposed a much newer, unique technique to achieve realistic real-time outdoor rendering, while taking into account the interaction between sky colours and objects in AR systems with respect to shadows in any specific location, date and time. This approach involves three main phases, which cover different outdoor AR rendering requirements. Firstly, sky colour was generated with respect to the position of the sun. Second step involves the shadow generation algorithm, Z-Partitioning: Gaussian and Fog Shadow Maps (Z-GaF Shadow Maps). Lastly, a technique to integrate sky colours and shadows through its effects on virtual objects in the AR system, is introduced. The experimental results reveal that the proposed technique has significantly improved the realism of real-time outdoor AR rendering, thus solving the problem of realistic AR systems. PMID:25268480

  8. Cylindrical confinement of semiflexible polymers

    NASA Astrophysics Data System (ADS)

    Vázquez-Montejo, Pablo; McDargh, Zachary; Deserno, Markus; Guven, Jemal

    2015-06-01

    Equilibrium states of a closed semiflexible polymer binding to a cylinder are described. This may be either by confinement or by constriction. Closed completely bound states are labeled by two integers: the number of oscillations, n , and the number of times it winds the cylinder, p , the latter being a topological invariant. We examine the behavior of these states as the length of the loop is increased by evaluating the energy, the conserved axial torque, and the contact force. The ground state for a given p is the state with n =1 ; a short loop with p =1 is an elliptic deformation of a parallel circle; as its length increases it elongates along the cylinder axis with two hairpin ends. Excited states with n ≥2 and p =1 possess n -fold axial symmetry. Short (long) loops possess energies ≈p E0 (n E0 ), with E0 the energy of a circular loop with same radius as the cylinder; in long loops the axial torque vanishes. Confined bound excited states are initially unstable; however, above a critical length each n -fold state becomes stable: The folded hairpin cannot be unfolded. The ground state for each p is also initially unstable with respect to deformations rotating the loop off the surface into the interior. A closed planar elastic curve aligned along the cylinder axis making contact with the cylinder on its two sides is identified as the ground state of a confined loop. Exterior bound states behave very differently, if free to unbind, as signaled by the reversal in the sign of the contact force. If p =1 , all such states are unstable. If p ≥2 , however, a topological obstruction to complete unbinding exists. If the loop is short, the bound state with p =2 and n =1 provides a stable constriction of the cylinder, partially unbinding as the length is increased. This motif could be relevant to an understanding of the process of membrane fission mediated by dynamin rings.

  9. Electromelting of Confined Monolayer Ice

    NASA Astrophysics Data System (ADS)

    Qiu, Hu; Guo, Wanlin

    2013-05-01

    In sharp contrast to the prevailing view that electric fields promote water freezing, here we show by molecular dynamics simulations that monolayer ice confined between two parallel plates can melt into liquid water under a perpendicularly applied electric field. The melting temperature of the monolayer ice decreases with the increasing strength of the external field due to the field-induced disruption of the water-wall interaction induced well-ordered network of the hydrogen bond. This electromelting process should add an important new ingredient to the physics of water.

  10. Electromelting of confined monolayer ice.

    PubMed

    Qiu, Hu; Guo, Wanlin

    2013-05-10

    In sharp contrast to the prevailing view that electric fields promote water freezing, here we show by molecular dynamics simulations that monolayer ice confined between two parallel plates can melt into liquid water under a perpendicularly applied electric field. The melting temperature of the monolayer ice decreases with the increasing strength of the external field due to the field-induced disruption of the water-wall interaction induced well-ordered network of the hydrogen bond. This electromelting process should add an important new ingredient to the physics of water. PMID:23705718

  11. Thermoelectricity in Confined Liquid Electrolytes.

    PubMed

    Dietzel, Mathias; Hardt, Steffen

    2016-06-01

    The electric field in an extended phase of a liquid electrolyte exposed to a temperature gradient is attributed to different thermophoretic mobilities of the ion species. As shown herein, such Soret-type ion thermodiffusion is not required to induce thermoelectricity even in the simplest electrolyte if it is confined between charged walls. The space charge of the electric double layer leads to selective ion diffusion driven by a temperature-dependent electrophoretic ion mobility, which-for narrow channels-may cause thermovoltages larger in magnitude than for the classical Soret equilibrium. PMID:27314730

  12. Thermoelectricity in Confined Liquid Electrolytes

    NASA Astrophysics Data System (ADS)

    Dietzel, Mathias; Hardt, Steffen

    2016-06-01

    The electric field in an extended phase of a liquid electrolyte exposed to a temperature gradient is attributed to different thermophoretic mobilities of the ion species. As shown herein, such Soret-type ion thermodiffusion is not required to induce thermoelectricity even in the simplest electrolyte if it is confined between charged walls. The space charge of the electric double layer leads to selective ion diffusion driven by a temperature-dependent electrophoretic ion mobility, which—for narrow channels—may cause thermovoltages larger in magnitude than for the classical Soret equilibrium.

  13. Confined Space Imager (CSI) Software

    SciTech Connect

    Karelilz, David

    2013-07-03

    The software provides real-time image capture, enhancement, and display, and sensor control for the Confined Space Imager (CSI) sensor system The software captures images over a Cameralink connection and provides the following image enhancements: camera pixel to pixel non-uniformity correction, optical distortion correction, image registration and averaging, and illumination non-uniformity correction. The software communicates with the custom CSI hardware over USB to control sensor parameters and is capable of saving enhanced sensor images to an external USB drive. The software provides sensor control, image capture, enhancement, and display for the CSI sensor system. It is designed to work with the custom hardware.

  14. A Distributed Radiator, Heavy Ion Target with Realistic Ion Beams

    NASA Astrophysics Data System (ADS)

    Callahan, Debra A.; Tabak, Max

    1997-11-01

    Recent efforts in heavy ion target design have centered around the distributed radiator design of Tabak(M. Tabak, Bull. Am. Phys. Soc., Vol 41, No 7, 1996.). The initial distributed radiator target assumed beams with a uniform radial density distribution aimed directly along the z axis. Chamber propagation simulations indicate that the beam distribution is more nearly Gaussian at best focus. In addition, more than two beams will be necessary to carry the required current; this means that the beams must be angled to allow space for the final focusing systems upstream. We will describe our modifications to the distributed radiator target to allow realistic beams and realistic beam angles.

  15. The effects of realistic pancake solenoids on particle transport

    SciTech Connect

    Gu, X.; Okamura, M.; Pikin, A.; Fischer, W.; Luo, Y.

    2011-02-01

    Solenoids are widely used to transport or focus particle beams. Usually, they are assumed as being ideal solenoids with a high axial-symmetry magnetic field. Using the Vector Field Opera program, we modeled asymmetrical solenoids with realistic geometry defects, caused by finite conductor and current jumpers. Their multipole magnetic components were analyzed with the Fourier fit method; we present some possible optimized methods for them. We also discuss the effects of 'realistic' solenoids on low energy particle transport. The finding in this paper may be applicable to some lower energy particle transport system design.

  16. Bosonic condensates in realistic supersymmetric GUT cosmic strings

    NASA Astrophysics Data System (ADS)

    Allys, Erwan

    2016-04-01

    We study the realistic structure of F-term Nambu-Goto cosmic strings forming in a general supersymmetric Grand Unified Theory implementation, assuming standard hybrid inflation. Examining the symmetry breaking of the unification gauge group down to the Standard Model, we discuss the minimal field content necessary to describe abelian cosmic strings appearing at the end of inflation. We find that several fields will condense in most theories, questioning the plausible occurrence of associated currents (bosonic and fermionic). We perturbatively evaluate the modification of their energy per unit length due to the condensates. We provide a criterion for comparing the usual abelian Higgs approximation used in cosmology to realistic situations.

  17. Are polymers glassier upon confinement?

    NASA Astrophysics Data System (ADS)

    Napolitano, Simone; Spiece, Jean; Martinez-Tong, Daniel E.; Sferrazza, Michele; Nogales, Aurora

    Glass forming systems are characterized by a stability against crystallization upon heating and by the easiness with which their liquid phase can be transformed into a solid lacking of long-range order upon cooling (glass forming ability). Here, we discuss on the the thickness dependence of the thermal phase transition temperatures of poly(L-lactide acid) thin films supported onto solid substrates. The determination of the glass transition (Tg), cold crystallization (TCC) and melting (Tm) temperatures down to a thickness of 6 nm via ellipsometry, permitted us to build up parameters describing glass stability and glass forming ability. We observed a strong influence of the film thickness on the latter, while the former is not affected by 1D confinement. Remarkably, the increase in Tg/Tm ratio, a parameter related to glass forming ability, is not accompanied by an increase in TCC-Tg, as observed on the contrary, in bulk metallic glasses. We explained this peculiar behavior of soft matter in confinement considering the impact of irreversible adsorption on local free volume content.

  18. Soft confinement for polymer solutions

    NASA Astrophysics Data System (ADS)

    Oya, Yutaka; Kawakatsu, Toshihiro

    2014-07-01

    As a model of soft confinement for polymers, we investigated equilibrium shapes of a flexible vesicle that contains a phase-separating polymer solution. To simulate such a system, we combined the phase field theory (PFT) for the vesicle and the self-consistent field theory (SCFT) for the polymer solution. We observed a transition from a symmetric prolate shape of the vesicle to an asymmetric pear shape induced by the domain structure of the enclosed polymer solution. Moreover, when a non-zero spontaneous curvature of the vesicle is introduced, a re-entrant transition between the prolate and the dumbbell shapes of the vesicle is observed. This re-entrant transition is explained by considering the competition between the loss of conformational entropy and that of translational entropy of polymer chains due to the confinement by the deformable vesicle. This finding is in accordance with the recent experimental result reported by Terasawa et al. (Proc. Natl. Acad. Sci. U.S.A., 108 (2011) 5249).

  19. Mixed confinement regimes during equilibrium confinement spectroscopy of DNA

    PubMed Central

    Gupta, Damini; Sheats, Julian; Muralidhar, Abhiram; Miller, Jeremy J.; Huang, Derek E.; Mahshid, Sara; Dorfman, Kevin D.; Reisner, Walter

    2014-01-01

    We have used a combination of fluorescence microscopy experiments and Pruned Enriched Rosenbluth Method simulations of a discrete wormlike chain model to measure the mean extension and the variance in the mean extension of λ-DNA in 100 nm deep nanochannels with widths ranging from 100 nm to 1000 nm in discrete 100 nm steps. The mean extension is only weakly affected by the channel aspect ratio. In contrast, the fluctuations of the chain extension qualitatively differ between rectangular channels and square channels with the same cross-sectional area, owing to the “mixing” of different confinement regimes in the rectangular channels. The agreement between experiment and simulation is very good, using the extension due to intercalation as the only adjustable parameter. PMID:24908035

  20. Elmo bumpy square plasma confinement device

    DOEpatents

    Owen, L.W.

    1985-01-01

    The invention is an Elmo bumpy type plasma confinement device having a polygonal configuration of closed magnet field lines for improved plasma confinement. In the preferred embodiment, the device is of a square configuration which is referred to as an Elmo bumpy square (EBS). The EBS is formed by four linear magnetic mirror sections each comprising a plurality of axisymmetric assemblies connected in series and linked by 90/sup 0/ sections of a high magnetic field toroidal solenoid type field generating coils. These coils provide corner confinement with a minimum of radial dispersion of the confined plasma to minimize the detrimental effects of the toroidal curvature of the magnetic field. Each corner is formed by a plurality of circular or elliptical coils aligned about the corner radius to provide maximum continuity in the closing of the magnetic field lines about the square configuration confining the plasma within a vacuum vessel located within the various coils forming the square configuration confinement geometry.

  1. Engineered Models of Confined Cell Migration.

    PubMed

    Paul, Colin D; Hung, Wei-Chien; Wirtz, Denis; Konstantopoulos, Konstantinos

    2016-07-11

    Cells in the body are physically confined by neighboring cells, tissues, and the extracellular matrix. Although physical confinement modulates intracellular signaling and the underlying mechanisms of cell migration, it is difficult to study in vivo. Furthermore, traditional two-dimensional cell migration assays do not recapitulate the complex topographies found in the body. Therefore, a number of experimental in vitro models that confine and impose forces on cells in well-defined microenvironments have been engineered. We describe the design and use of microfluidic microchannel devices, grooved substrates, micropatterned lines, vertical confinement devices, patterned hydrogels, and micropipette aspiration assays for studying cell responses to confinement. Use of these devices has enabled the delineation of changes in cytoskeletal reorganization, cell-substrate adhesions, intracellular signaling, nuclear shape, and gene expression that result from physical confinement. These assays and the physiologically relevant signaling pathways that have been elucidated are beginning to have a translational and clinical impact. PMID:27420571

  2. Resonant entrainment of a confined pulsed jet

    NASA Technical Reports Server (NTRS)

    Parikh, P. G.; Moffat, R. J.

    1982-01-01

    This paper reports the discovery of a new resonant entrainment phenomenon associated with a confined, pulsed jet flow. It was found that a confined jet, when pulsed at an organ-pipe resonant frequency of the confinement tube, experiences greatly enhanced entrainment and mixing near the exit end of the confinement tube compared to a steady confined jet. The mixing and entrainment rates for the resonantly pulsed confined jet approach, and in some cases slightly exceed, those for an unconfined pulsed jet. Both visual and quantitative evidence of this phenomenon is presented. The new effect should be of considerable interest in ejector and combustor design, both of which benefit from any enhancement in mixing between a primary and a secondary flow

  3. A Realistic Experimental Design and Statistical Analysis Project

    ERIC Educational Resources Information Center

    Muske, Kenneth R.; Myers, John A.

    2007-01-01

    A realistic applied chemical engineering experimental design and statistical analysis project is documented in this article. This project has been implemented as part of the professional development and applied statistics courses at Villanova University over the past five years. The novel aspects of this project are that the students are given a…

  4. Determination of quantum-noise parameters of realistic cavities

    NASA Astrophysics Data System (ADS)

    Semenov, A. A.; Vogel, W.; Khanbekyan, M.; Welsch, D.-G.

    2007-01-01

    A procedure is developed which allows one to measure all the parameters occurring in a complete model [A. A. Semenov , Phys. Rev. A 74, 033803 (2006)] of realistic leaky cavities with unwanted noise. The method is based on the reflection of properly chosen test pulses by the cavity.

  5. International Management: Creating a More Realistic Global Planning Environment.

    ERIC Educational Resources Information Center

    Waldron, Darryl G.

    2000-01-01

    Discusses the need for realistic global planning environments in international business education, introducing a strategic planning model that has teams interacting with teams to strategically analyze a selected multinational company. This dynamic process must result in a single integrated written analysis that specifies an optimal strategy for…

  6. Highly realistic, immersive training for navy corpsmen: preliminary results.

    PubMed

    Booth-Kewley, Stephanie; McWhorter, Stephanie K

    2014-12-01

    Highly realistic, immersive training has been developed for Navy corpsmen based on the success of the Infantry Immersion Trainer. This new training is built around scenarios that are designed to depict real-life, operational situations. Each scenario used in the training includes sights, sounds, smells, and distractions to simulate realistic and challenging combat situations. The primary objective of this study was to assess corpsmen participants' satisfaction with highly realistic training. The study sample consisted of 434 male Navy service members attending Field Medical Training Battalion-West, Camp Pendleton, California. Corpsmen participants completed surveys after receiving the training. Participants expressed high levels of satisfaction with the training overall and with several specific elements of the training. The element of the training that the corpsmen rated the highest was the use of live actors. The vast majority of the participants reported that the training had increased their overall confidence about being successful corpsmen and had strengthened their confidence in their ability to provide care under pressure. Additional research should extend highly realistic training to other military medical provider populations. PMID:25469964

  7. Eliciting Mathematical Thinking of Students through Realistic Mathematics Education

    ERIC Educational Resources Information Center

    Anwar, Lathifu; Budayasa, I Ketut; Amin, Siti M.; de Haan, Dede

    2012-01-01

    This paper focuses on an implementation a sequence of instructional activities about addition of fractions that has been developed and implemented in grade four of primary school in Surabaya, Indonesia. The theory of Realistic Mathematics Education (RME) has been applied in the sequence, which aims to assist low attaining learners in supporting…

  8. Synthesis Of Realistic Animations Of A Person Speaking

    NASA Technical Reports Server (NTRS)

    Scott, Kenneth C.; Kagels, David S.; Watson, Stephen H.; Rom, Hillel S.; Lorre, Jean J.; Wright, John R.; Duxbury, Elizabeth D.

    1995-01-01

    Actors computer program implements automated process that synthesizes realistic animations of person speaking. Produces "newscaster" type video sequences. Uses images of person and, therefore, not limited to cartoons and cartoonlike movies. Potential applications also include use of process for automatically producing on-the-fly animations for human/computer interfaces and for reducing bandwidth needed to transmit video telephone signals.

  9. Developing Skills: Realistic Work Environments in Further Education. FEDA Reports.

    ERIC Educational Resources Information Center

    Armstrong, Paul; Hughes, Maria

    To establish the prevalence and perceived value of realistic work environments (RWEs) in colleges and their use as learning resources, all further education (FE) sector colleges in Great Britain were surveyed in the summer of 1998. Of 175 colleges that responded to 2 questionnaires for senior college managers and RWE managers, 127 had at least 1…

  10. The Potential and Challenges of Critical Realist Ethnography

    ERIC Educational Resources Information Center

    Barron, Ian

    2013-01-01

    This article revisits the critical realist ethnographic process that was adopted in my doctoral thesis, which was concerned with the experiences of ethnic identity of white British and Pakistani British children as they started kindergarten in the northwest of England. The article focuses on the ethnography that emerged from the visits that I…

  11. A SPATIALLY REALISTIC MODEL FOR INFORMING FOREST MANAGEMENT DECISIONS

    EPA Science Inventory

    Spatially realistic population models (SRPMs) address a fundamental
    problem commonly confronted by wildlife managers - predicting the
    effects of landscape-scale habitat management on an animal population.
    SRPMs typically consist of three submodels: (1) a habitat submodel...

  12. Realistic glottal motion and airflow rate during human breathing.

    PubMed

    Scheinherr, Adam; Bailly, Lucie; Boiron, Olivier; Lagier, Aude; Legou, Thierry; Pichelin, Marine; Caillibotte, Georges; Giovanni, Antoine

    2015-09-01

    The glottal geometry is a key factor in the aerosol delivery efficiency for treatment of lung diseases. However, while glottal vibrations were extensively studied during human phonation, the realistic glottal motion during breathing is poorly understood. Therefore, most current studies assume an idealized steady glottis in the context of respiratory dynamics, and thus neglect the flow unsteadiness related to this motion. This is particularly important to assess the aerosol transport mechanisms in upper airways. This article presents a clinical study conducted on 20 volunteers, to examine the realistic glottal motion during several breathing tasks. Nasofibroscopy was used to investigate the glottal geometrical variations simultaneously with accurate airflow rate measurements. In total, 144 breathing sequences of 30s were recorded. Regarding the whole database, two cases of glottal time-variations were found: "static" or "dynamic" ones. Typically, the peak value of glottal area during slow breathing narrowed from 217 ± 54 mm(2) (mean ± STD) during inspiration, to 178 ± 35 mm(2) during expiration. Considering flow unsteadiness, it is shown that the harmonic approximation of the airflow rate underevaluates the inertial effects as compared to realistic patterns, especially at the onset of the breathing cycle. These measurements provide input data to conduct realistic numerical simulations of laryngeal airflow and particle deposition. PMID:26159687

  13. Two-Capacitor Problem: A More Realistic View.

    ERIC Educational Resources Information Center

    Powell, R. A.

    1979-01-01

    Discusses the two-capacitor problem by considering the self-inductance of the circuit used and by determining how well the usual series RC circuit approximates the two-capacitor problem when realistic values of L, C, and R are chosen. (GA)

  14. Critical Realist Review: Exploring the Real, beyond the Empirical

    ERIC Educational Resources Information Center

    Edgley, Alison; Stickley, Theodore; Timmons, Stephen; Meal, Andy

    2016-01-01

    This article defines the "critical realist review", a literature-based methodological approach to critical analysis of health care studies (or any discipline charged with social interventions) that is robust, insightful and essential for the complexities of twenty-first century evidence-based health and social care. We argue that this…

  15. The Instructional Effectiveness of Integrating Abstract and Realistic Visualization.

    ERIC Educational Resources Information Center

    Joseph, John H.

    This study examined the question of whether the integration of abstract and realistic visualization can improve the effectiveness of visualized instruction. Two methods of integrating visualizations were investigated. The first method used hybrid illustrations, i.e., a real color photograph into which a line drawing segment has been inserted. This…

  16. Magical Realist Pathways into and under the Psychotherapeutic Imaginary

    ERIC Educational Resources Information Center

    Speedy, Jane

    2011-01-01

    My experience of people's life stories from my work as a narrative therapist consistently destabilised distinctions between imagined/magical and real experiences. I came to realise that the day-to-day magical realist juxtapositions I came upon were encounters with people's daily lives, as lived, that have remained unacknowledged within the…

  17. Quark confinement in a constituent quark model

    SciTech Connect

    Langfeld, K.; Rho, M.

    1995-07-01

    On the level of an effective quark theory, we define confinement by the absence of quark anti-quark thresholds in correlation function. We then propose a confining Nambu-Jona-Lasinio-type model. The confinement is implemented in analogy to Anderson localization in condensed matter systems. We study the model`s phase structure as well as its behavior under extreme conditions, i.e. high temperature and/or high density.

  18. DNA statics and dynamics in nanoscale confinement

    NASA Astrophysics Data System (ADS)

    Reisner, Walter W.; Morton, Keith; Riehn, Robert; Wang, Yan Mei; Chou, Stephen; Austin, Robert H.

    2005-01-01

    We present, along with theoretical scaling arguments, measurements of the equilibrium and dynamic properties of λ and T2 phage DNA molecules confined in quartz nanochannels. Such measurements serve a two-fold purpose: (1) we hope to assist in the design of future nanofluidic devices by quantifying the behavior of semiflexible polymers in confined environments and (2) we hope to test existing theories for confined semiflexible polymers.

  19. Field-induced confined states in graphene

    SciTech Connect

    Moriyama, Satoshi; Morita, Yoshifumi; Watanabe, Eiichiro; Tsuya, Daiju

    2014-02-03

    We report an approach to confine the carriers in single-layer graphene, which leads to quantum devices with field-induced quantum confinement. We demonstrated that the Coulomb-blockade effect evolves under a uniform magnetic field perpendicular to the graphene device. Our experimental results show that field-induced quantum dots are realized in graphene, and a quantum confinement-deconfinement transition is switched by the magnetic field.

  20. Anisotropic de Gennes Narrowing in Confined Fluids

    NASA Astrophysics Data System (ADS)

    Nygârd, Kim; Buitenhuis, Johan; Kagias, Matias; Jefimovs, Konstantins; Zontone, Federico; Chushkin, Yuriy

    2016-04-01

    The collective diffusion of dense fluids in spatial confinement is studied by combining high-energy (21 keV) x-ray photon correlation spectroscopy and small-angle x-ray scattering from colloid-filled microfluidic channels. We find the structural relaxation in confinement to be slower compared to the bulk. The collective dynamics is wave vector dependent, akin to the de Gennes narrowing typically observed in bulk fluids. However, in stark contrast to the bulk, the structure factor and de Gennes narrowing in confinement are anisotropic. These experimental observations are essential in order to develop a microscopic theoretical description of collective diffusion of dense fluids in confined geometries.

  1. Confined Space Imager (CSI) Software

    Energy Science and Technology Software Center (ESTSC)

    2013-07-03

    The software provides real-time image capture, enhancement, and display, and sensor control for the Confined Space Imager (CSI) sensor system The software captures images over a Cameralink connection and provides the following image enhancements: camera pixel to pixel non-uniformity correction, optical distortion correction, image registration and averaging, and illumination non-uniformity correction. The software communicates with the custom CSI hardware over USB to control sensor parameters and is capable of saving enhanced sensor images to anmore » external USB drive. The software provides sensor control, image capture, enhancement, and display for the CSI sensor system. It is designed to work with the custom hardware.« less

  2. Multishell inertial confinement fusion target

    DOEpatents

    Holland, James R.; Del Vecchio, Robert M.

    1987-01-01

    A method of fabricating multishell fuel targets for inertial confinement fusion usage. Sacrificial hemispherical molds encapsulate a concentric fuel pellet which is positioned by fiber nets stretched tautly across each hemispherical mold section. The fiber ends of the net protrude outwardly beyond the mold surfaces. The joint between the sacrificial hemispheres is smoothed. A ceramic or glass cover is then deposited about the finished mold surfaces to produce an inner spherical surface having continuously smooth surface configuration. The sacrificial mold is removed by gaseous reactions accomplished through the porous ceramic cover prior to enclosing of the outer sphere by addition of an outer coating. The multishell target comprises the inner fuel pellet concentrically arranged within a surrounding coated cover or shell by fiber nets imbedded within the cover material.

  3. Multishell inertial confinement fusion target

    DOEpatents

    Holland, James R.; Del Vecchio, Robert M.

    1984-01-01

    A method of fabricating multishell fuel targets for inertial confinement fusion usage. Sacrificial hemispherical molds encapsulate a concentric fuel pellet which is positioned by fiber nets stretched tautly across each hemispherical mold section. The fiber ends of the net protrude outwardly beyond the mold surfaces. The joint between the sacrificial hemispheres is smoothed. A ceramic or glass cover is then deposited about the finished mold surfaces to produce an inner spherical surface having continuously smooth surface configuration. The sacrificial mold is removed by gaseous reaction accomplished through the porous ceramic cover prior to enclosing of the outer sphere by addition of an outer coating. The multishell target comprises the inner fuel pellet concentrically arranged within a surrounding coated cover or shell by fiber nets imbedded within the cover material.

  4. Are polymers glassier upon confinement?

    PubMed

    Spièce, Jean; Martínez-Tong, Daniel E; Sferrazza, Michele; Nogales, Aurora; Napolitano, Simone

    2015-08-21

    Glass forming systems are characterized by a stability against crystallization upon heating and by the easiness with which their liquid phase can be transformed into a solid lacking of long-range order upon cooling (glass forming ability). Here, we report the thickness dependence of the thermal phase transition temperatures of poly(l-lactide acid) thin films supported onto solid substrates. The determination of the glass transition, cold crystallization and melting temperatures down to a thickness of 6 nm, permitted us to build up parameters describing glass stability and glass forming ability. We observed a strong influence of the film thickness on the latter, while the former is not affected by 1D confinement. Further experiments permitted us to highlight key structural morphology features giving insights to our ellipsometric results via a physical picture based on the changes in the free volume content in proximity of the supporting interfaces. PMID:26086889

  5. Fingering in Confined Elastic Layers

    NASA Astrophysics Data System (ADS)

    Biggins, John; Mahadevan, L.; Wei, Z.; Saintyves, Baudouin; Bouchaud, Elizabeth

    2015-03-01

    Fingering has recently been observed in soft highly elastic layers that are confined between and bonded to two rigid bodies. In one case an injected fluid invades the layer in finger-like protrusions at the layer's perimeter, a solid analogue of Saffman-Taylor viscous fingering. In a second case, separation of the rigid bodies (with maintained adhesion to the layer) leads air to the formation of similar fingers at the layer's perimeter. In both cases the finger formation is reversible: if the fluid is removed or the separation reduced, the fingers vanish. In this talk I will discuss a theoretical model for such elastic fingers that shows that the origin of the fingers is large-strain geometric non-linearity in the elasticity of soft solids. Our simplified elastic model unifies the two types of fingering and accurately estimates the thresholds and wavelengths of the fingers.

  6. Magnetic confinement of cosmic clouds

    NASA Technical Reports Server (NTRS)

    Azar, Michel; Thompson, W. B.

    1988-01-01

    The role of the magnetic field in the confinement or compression of interstellar gas clouds is reconsidered. The virial theorem for an isolated magnetized cloud in the presence of distant magnetic sources is reformulated in terms of moments of the internal and external currents, and an equilibrium condition is derived. This condition is applied to the interaction between isolated clouds for the simple- and artificial-case in which the field of each cloud is a dipole. With the simplest of statistical assumptions, the probability of any given cloud being compressed is calculated as about 10 percent, the magnetic field acting as a medium which transmits the kinetic pressure between clouds. Even when compression occurs the magnetic pressure 1/2 B-squared may decrease on leaving the cloud surface.

  7. Plasmons under extreme dimensional confinement

    NASA Astrophysics Data System (ADS)

    Weitering, Hanno

    2012-02-01

    In our studies, we explore how surface and bulk plasmons emerge under extreme dimensional confinement, i.e., dimensions that are orders of magnitude smaller than those employed in `nanoplasmonics'. Atomically-smooth ultrathin Mg films were epitaxially grown on Si(111), allowing for atomically-precise tuning of the plasmon response.ootnotetextM.M. "Ozer, E.J. Moon, A.G. Eguiluz, and H.H. Weitering, Phys. Rev. Lett. 106, 197601 (2011). While the single-particle states in these 3-12 monolayer (ML) thick films consist of a series of two-dimensional subbands, the bulk-plasmon response is like that of a thin slice carved from bulk Mg subject to quantum-mechanical boundary conditions. Remarkably, this bulk-like behavior persists all the way down to 3 ML. In the 3-12 ML thickness range, bulk loss spectra are dominated by the n=1 and n=2 normal modes, consistent with the excitation of plasmons involving quantized electronic subbands. The collective response of the thinnest films is furthermore characterized by a thickness-dependent spectral weight transfer from the high-energy collective modes to the low-energy single-particle excitations, until the bulk plasmon ceases to exist below 3 ML. Surface- and multipole plasmon modes even persist down to 2 ML. These results are striking manifestations of the role of quantum confinement on plasmon resonances in precisely controlled nanostructures. They furthermore suggest the intriguing possibility of tuning resonant plasmon frequencies via precise dimensional control.

  8. Shear Relaxations of Confined Liquids.

    NASA Astrophysics Data System (ADS)

    Carson, George Amos, Jr.

    Ultrathin (<40 A) films of octamethylcyclotetrasiloxane (OMCTS), hexadecane, and dodecane were subjected to linear and non-linear oscillatory shear between flat plates. Shearing frequencies of 0.1 to 800 s^{-1} were applied at pressures from zero to 0.8 MPa using a surface rheometer only recently developed. In most cases the plates were atomically smooth mica surfaces; the role of surface interactions was examined by replacing these with alkyl chain monolayers. OMCTS and hexadecane were examined at a temperature about 5 Celsius degrees above their melting points and tended to solidify. Newtonian plateaus having enormous viscosities were observed at low shear rates. The onset of shear thinning implied relaxation times of about 0.1 s in the linear structure of the confined liquids. Large activation volumes (~80 nm ^3) suggested that shear involved large-scale collective motion. Dodecane was studied at a much higher temperature relative to its melting point and showed no signs of impending solidification though it exhibited well-defined regions of Newtonian response and power law shear thinning. When treated with molecular sieves before use, dodecane had relaxation times which were short (0.02 s) compared to hexadecane, but still exhibited large-scale collective motion. When treated with silica gel, an unexplained long -time relaxation (10 s) was seen in the Newtonian viscosity of dodecane. The relaxation time of the linear structure, 0.005 s was very small, and the storage modulus was unresolvable. The small activation volume (7nm^3) indicated a much lower level of collective motion. The activation volume remained small when dodecane was confined between tightly bound, low energy, alkyl monolayers. At low strains the storage and loss moduli became very large (>10^4 Pa), probably due to interactions with flaws in the monolayers. Dramatic signs of wall slip were observed at large strains even at low pressures.

  9. Shear relaxations of confined liquids

    SciTech Connect

    Carson, G.A. Jr.

    1992-01-01

    Ultrathin (<40 [angstrom]) films of octamethylcyclotetrasiloxane (OMCTS), hexadecane, and dodecane were subjected to linear and non-linear oscillatory shear between flat plates. Shearing frequencies of 0.1 to 800 s[sup [minus]1] were applied at pressures from zero to 0.8 MPa using a surface rheometer only recently developed. In most cases the plates were atomically smooth mica surfaces; the role of surface interactions was examined by replacing these with alkyl chain monolayers. OMCTS and hexadecane were examined at a temperature about 5 Celcius degrees above their melting points and tended to solidify. Newtonian plateaus having enormous viscosities were observed at low shear rates. The onset of shear thinning implied relaxation times of about 0.1 s in the linear structure of the confined liquids. Large activation volumes ([approximately]80 nm[sup 3]) suggested that shear involved large-scale collective motion. Dodecane was studied at a much higher temperature relative to its melting point and showed no signs of impending solidification though it exhibited well-defined regions of Newtonian response and power law shear thinning. When treated with molecular sieves before use, dodecane had relaxation times which were short (0.02 s) compared to hexadecane, but still exhibited large-scale collective motion. When treated with silica gel, an unexplained long-time relaxation (10 s) was seen in the Newtonian viscosity of dodecane. The relaxation time of the linear structure, 0.005 s was very small, and the storage modulus was unresolvable. The small activation volume (7 nm[sup 3]) indicated a much lower level of collective motion. The activation volume remained small when dodecane was confined between tightly bound, low energy, alkyl monolayers. At low strains the storage and loss moduli became very large (>10[sup 4] Pa), probably due to interactions with flaws in the monolayers. Dramatic signs of wall slip were observed at large strains even at low pressures.

  10. Velocity shear stabilization of centrifugally confined plasma.

    PubMed

    Huang, Y M; Hassam, A B

    2001-12-01

    A magnetized, centrifugally confined plasma is subjected to a 3D MHD stability test. Ordinarily, the system is expected to be grossly unstable to "flute" interchanges of field lines. Numerical simulation shows though that the system is stable on account of velocity shear. This allows consideration of a magnetically confined plasma for thermonuclear fusion that has a particularly simple coil configuration. PMID:11736455

  11. Climate conditions in bedded confinement buildings

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Confinement buildings are utilized for finishing cattle to allow more efficient collection of animal waste and to buffer animals against adverse climatic conditions. Environmental data were obtained from a 29 m wide x 318 m long bedded confinement building with the long axis oriented east to west. T...

  12. Confinement and the safety factor profile

    SciTech Connect

    Batha, S.H.; Levinton, F.M.; Scott, S.D.

    1995-12-01

    The conjecture that the safety factor profile, q(r), controls the improvement in tokamak plasmas from poor confinement in the Low (L-) mode regime to improved confinement in the supershot regime has been tested in two experiments on the Tokamak Fusion Test Reactor (TFTR). First, helium was puffed into the beam-heated phase of a supershot discharge which induced a degradation from supershot to L-mode confinement in about 100 msec, far less than the current relaxation time. The q and shear profiles measured by a motional Stark effect polarimeter showed little change during the confinement degradation. Second, rapid current ramps in supershot plasmas altered the q profile, but were observed not to change significantly the energy confinement. Thus, enhanced confinement in supershot plasmas is not due to a particular q profile which has enhanced stability or transport properties. The discharges making a continuous transition between supershot and L-mode confinement were also used to test the critical-electron-temperature-gradient transport model. It was found that this model could not reproduce the large changes in electron and ion temperature caused by the change in confinement.

  13. Realistic Covariance Prediction for the Earth Science Constellation

    NASA Technical Reports Server (NTRS)

    Duncan, Matthew; Long, Anne

    2006-01-01

    Routine satellite operations for the Earth Science Constellation (ESC) include collision risk assessment between members of the constellation and other orbiting space objects. One component of the risk assessment process is computing the collision probability between two space objects. The collision probability is computed using Monte Carlo techniques as well as by numerically integrating relative state probability density functions. Each algorithm takes as inputs state vector and state vector uncertainty information for both objects. The state vector uncertainty information is expressed in terms of a covariance matrix. The collision probability computation is only as good as the inputs. Therefore, to obtain a collision calculation that is a useful decision-making metric, realistic covariance matrices must be used as inputs to the calculation. This paper describes the process used by the NASA/Goddard Space Flight Center's Earth Science Mission Operations Project to generate realistic covariance predictions for three of the Earth Science Constellation satellites: Aqua, Aura and Terra.

  14. Realistic Covariance Prediction For the Earth Science Constellations

    NASA Technical Reports Server (NTRS)

    Duncan, Matthew; Long, Anne

    2006-01-01

    Routine satellite operations for the Earth Science Constellations (ESC) include collision risk assessment between members of the constellations and other orbiting space objects. One component of the risk assessment process is computing the collision probability between two space objects. The collision probability is computed via Monte Carlo techniques as well as numerically integrating relative probability density functions. Each algorithm takes as inputs state vector and state vector uncertainty information for both objects. The state vector uncertainty information is expressed in terms of a covariance matrix. The collision probability computation is only as good as the inputs. Therefore, to obtain a collision calculation that is a useful decision-making metric, realistic covariance matrices must be used as inputs to the calculation. This paper describes the process used by NASA Goddard's Earth Science Mission Operations Project to generate realistic covariance predictions for three of the ESC satellites: Aqua, Aura, and Terra

  15. Realistic Parameters for the Description of Organic Metals

    NASA Astrophysics Data System (ADS)

    Dolfen, Andreas; Koch, Erik; Blum, Volker; Cano-Cortés, Laura; Merino, Jaime

    2009-03-01

    In molecular crystals correlation effects are often significant. For a non-perturbative description of the full Coulomb interaction we have therefore to resort to a model description in terms of generalized Hubbard models. The derivation of parameters for such models is crucial for realistic simulations. While hopping parameters are easily derived from density-functional theory (DFT) the Coulomb parameters pose a significant problem due to screening processes. We decompose their contributions into intra- and inter-molecular parts. The intra-molecularly screened Coulomb parameters are treated within DFT whereas the inter-molecular corrections are evaluated using classical electrostatics with DFT-derived polarizabilities and the distributed-dipole approach in combination with a Ewald summation. Even for simple lattices of polarizable point dipoles we find intriguing screening phenomena. As realistic applications we discuss the one- and two-dimensional organic metals TTF-TCNQ and θ-(BEDT-TTF)2I3.

  16. Realistic fetus skin color processing for ultrasound volume rendering

    NASA Astrophysics Data System (ADS)

    Kim, Yun-Tae; Kim, Kyuhong; Park, Sung-Chan; Kang, Jooyoung; Kim, Jung-Ho

    2014-01-01

    This paper proposes realistic fetus skin color processing using a 2D color map and a tone mapping function (TMF) for ultrasound volume rendering. The contributions of this paper are a 2D color map generated through a gamut model of skin color and a TMF that depends on the lighting position. First, the gamut model of fetus skin color is calculated by color distribution of baby images. The 2D color map is created using a gamut model for tone mapping of ray casting. For the translucent effect, a 2D color map in which lightness is inverted is generated. Second, to enhance the contrast of rendered images, the luminance, color, and tone curve TMF parameters are changed using 2D Gaussian function that depends on the lighting position. The experimental results demonstrate that the proposed method achieves better realistic skin color reproduction than the conventional method.

  17. Automatic Perceptual Color Map Generation for Realistic Volume Visualization

    PubMed Central

    Silverstein, Jonathan C.; Parsad, Nigel M.; Tsirline, Victor

    2008-01-01

    Advances in computed tomography imaging technology and inexpensive high performance computer graphics hardware are making high-resolution, full color (24-bit) volume visualizations commonplace. However, many of the color maps used in volume rendering provide questionable value in knowledge representation and are non-perceptual thus biasing data analysis or even obscuring information. These drawbacks, coupled with our need for realistic anatomical volume rendering for teaching and surgical planning, has motivated us to explore the auto-generation of color maps that combine natural colorization with the perceptual discriminating capacity of grayscale. As evidenced by the examples shown that have been created by the algorithm described, the merging of perceptually accurate and realistically colorized virtual anatomy appears to insightfully interpret and impartially enhance volume rendered patient data. PMID:18430609

  18. Inertial Confinement Fusion Materials Science

    SciTech Connect

    Hamza, A V

    2004-06-01

    Demonstration of thermonuclear ignition and gain on a laboratory scale is one of science's grand challenges. The National Ignition Facility (NIF) is committed to achieving inertial confinement fusion (ICF) by 2010. Success in this endeavor depends on four elements: the laser driver performance, target design, experimental diagnostics performance, and target fabrication and target materials performance. This article discusses the current state of target fabrication and target materials performance. The first three elements will only be discussed insofar as they relate to target fabrication specifications and target materials performance. Excellent reviews of the physics of ICF are given by Lindl [Lindl 1998] and Lindl et al. [Lindl 2004]. To achieve conditions under which inertial confinement is sufficient to achieve thermonuclear burn, an imploded fuel capsule is compressed to conditions of high density and temperature. In the laboratory a driver is required to impart energy to the capsule to effect an implosion. There are three drivers currently being considered for ICF in the laboratory: high-powered lasers, accelerated heavy ions, and x rays resulting from pulsed power machines. Of these, high-powered lasers are the most developed, provide the most symmetric drive, and provide the most energy. Laser drive operates in two configurations. The first is direct drive where the laser energy impinges directly on the ICF capsule and drives the implosion. The second is indirect drive, where the energy from the laser is first absorbed in a high-Z enclosure or hohlraum surrounding the capsule, and the resulting x-rays emitted by the hohlraum material drives the implosion. Using direct drive the laser beam energy is absorbed by the electrons in the outer corona of the target. The electrons transport the energy to the denser shell region to provide the ablation and the resulting implosion. Laser direct drive is generally less efficient and more hydrodynamically unstable than

  19. Protein Folding in Confined and Crowded Environments

    PubMed Central

    Zhou, Huan-Xiang

    2007-01-01

    Confinement and crowding are two major factors that can potentially impact protein folding in cellular environments. Theories based on considerations of excluded volumes predict disparate effects on protein folding stability for confinement and crowding: confinement can stabilize proteins by over 10kBT but crowding has a very modest effect on stability. On the other hand, confinement and crowding are both predicted to favor conformations of the unfolded state which are compact, and consequently may increase the folding rate. These predictions are largely borne out by experimental studies of protein folding under confined and crowded conditions in the test tube. Protein folding in cellular environments is further complicated by interactions with surrounding surfaces and other factors. Concerted theoretical modeling and test-tube and in vivo experiments promise to elucidate the complexity of protein folding in cellular environments. PMID:17719556

  20. Boundaries Matter for Confined Colloidal Glasses

    NASA Astrophysics Data System (ADS)

    Hunter, Gary L.; Edmond, Kazem V.; Weeks, Eric R.

    2012-02-01

    We confine dense colloidal suspensions within emulsion droplets to examine how confinement and properties of the confining medium affect the colloidal glass transition. Samples are imaged via fast confocal microscopy. By observing a wide range of droplet sizes and varying the viscosity of the external continuous phase, we separate finite size and boundary effects on particle motions within the droplet. Suspensions are composed of binary PMMA spheres in organic solvents while the external phases are simple mixtures of water and glycerol. In analogy with molecular super-cooled liquids and thin-film polymers, we find that confinement effects in colloidal systems are not merely functions of the finite size of the system, but are strongly dependent on the viscosity of the confining medium and interactions between particles and the interface of the two phases.

  1. Blend Shape Interpolation and FACS for Realistic Avatar

    NASA Astrophysics Data System (ADS)

    Alkawaz, Mohammed Hazim; Mohamad, Dzulkifli; Basori, Ahmad Hoirul; Saba, Tanzila

    2015-03-01

    The quest of developing realistic facial animation is ever-growing. The emergence of sophisticated algorithms, new graphical user interfaces, laser scans and advanced 3D tools imparted further impetus towards the rapid advancement of complex virtual human facial model. Face-to-face communication being the most natural way of human interaction, the facial animation systems became more attractive in the information technology era for sundry applications. The production of computer-animated movies using synthetic actors are still challenging issues. Proposed facial expression carries the signature of happiness, sadness, angry or cheerful, etc. The mood of a particular person in the midst of a large group can immediately be identified via very subtle changes in facial expressions. Facial expressions being very complex as well as important nonverbal communication channel are tricky to synthesize realistically using computer graphics. Computer synthesis of practical facial expressions must deal with the geometric representation of the human face and the control of the facial animation. We developed a new approach by integrating blend shape interpolation (BSI) and facial action coding system (FACS) to create a realistic and expressive computer facial animation design. The BSI is used to generate the natural face while the FACS is employed to reflect the exact facial muscle movements for four basic natural emotional expressions such as angry, happy, sad and fear with high fidelity. The results in perceiving the realistic facial expression for virtual human emotions based on facial skin color and texture may contribute towards the development of virtual reality and game environment of computer aided graphics animation systems.

  2. An Argument Against the Realistic Interpretation of the Wave Function

    NASA Astrophysics Data System (ADS)

    Rovelli, Carlo

    2016-07-01

    Testable predictions of quantum mechanics are invariant under time reversal. But the evolution of the quantum state in time is not so, neither in the collapse nor in the no-collapse interpretations of the theory. This is a fact that challenges any realistic interpretation of the quantum state. On the other hand, this fact raises no difficulty if we interpret the quantum state as a mere calculation device, bookkeeping past real quantum events.

  3. Realistic localizer courses for aircraft instrument landing simulators

    NASA Technical Reports Server (NTRS)

    Murphy, T. A.

    1984-01-01

    The realistic instrument landing simulator (ILS) course structures for use in aircraft simulators are described. Software developed for data conversion and translation of ILS course structure measurements and calcomp plots of the courses provided are described. A method of implementing the ILS course structure data in existing aircraft simulators is outlined. A cockpit used in the lab to review the digitized ILS course structures is displayed.

  4. "easyMine" - realistic and systematic mine detection simulation tooltion

    NASA Astrophysics Data System (ADS)

    Böttger, U.; Beier, K.; Biering, B.; Müller, C.; Peichl, M.; Spyra, W.

    2004-05-01

    Mine detection is to date mainly performed with metal detectors, although new methods for UXO detection are explored worldwide. The main problem for the mine detection to date is, that there exist some ideas of which sensor combinations could yield a high score, but until now there is no systematic analysis of mine detection methods together with realistic environmental conditions to conclude on a physically and technically optimized sensor combination. This gap will be removed by a project "easyMine" (Realistic and systematic Mine Detection Simulation Tool) which will result in a simulation tool for optimizing land mine detection in a realistic mine field. The project idea for this software tool is presented, that will simulate the closed chain of mine detection, including the mine in its natural environment, the sensor, the evaluation and application of the measurements by an user. The tool will be modularly designed. Each chain link will be an independent, exchangeable sub- module and will describe a stand alone part of the whole mine detection procedure. The advantage of the tool will be the evaluation of very different kinds of sensor combinations in relation of their real potential for mine detection. Three detection methods (metal detector, GPR and imaging IR-radiometry) will be explained to be introduced into the easyMine software tool in a first step. An actual example for land mine detection problem will be presented and approaches for solutions with easyMine will be shown.

  5. MRXCAT: Realistic numerical phantoms for cardiovascular magnetic resonance

    PubMed Central

    2014-01-01

    Background Computer simulations are important for validating novel image acquisition and reconstruction strategies. In cardiovascular magnetic resonance (CMR), numerical simulations need to combine anatomical information and the effects of cardiac and/or respiratory motion. To this end, a framework for realistic CMR simulations is proposed and its use for image reconstruction from undersampled data is demonstrated. Methods The extended Cardiac-Torso (XCAT) anatomical phantom framework with various motion options was used as a basis for the numerical phantoms. Different tissue, dynamic contrast and signal models, multiple receiver coils and noise are simulated. Arbitrary trajectories and undersampled acquisition can be selected. The utility of the framework is demonstrated for accelerated cine and first-pass myocardial perfusion imaging using k-t PCA and k-t SPARSE. Results MRXCAT phantoms allow for realistic simulation of CMR including optional cardiac and respiratory motion. Example reconstructions from simulated undersampled k-t parallel imaging demonstrate the feasibility of simulated acquisition and reconstruction using the presented framework. Myocardial blood flow assessment from simulated myocardial perfusion images highlights the suitability of MRXCAT for quantitative post-processing simulation. Conclusion The proposed MRXCAT phantom framework enables versatile and realistic simulations of CMR including breathhold and free-breathing acquisitions. PMID:25204441

  6. Near-realistic mobile exergames with wireless wearable sensors.

    PubMed

    Mortazavi, Bobak; Nyamathi, Suneil; Lee, Sunghoon Ivan; Wilkerson, Thomas; Ghasemzadeh, Hassan; Sarrafzadeh, Majid

    2014-03-01

    Exergaming is expanding as an option for sedentary behavior in childhood/adult obesity and for extra exercise for gamers. This paper presents the development process for a mobile active sports exergame with near-realistic motions through the usage of body-wearable sensors. The process begins by collecting a dataset specifically targeted to mapping real-world activities directly to the games, then, developing the recognition system in a fashion to produce an enjoyable game. The classification algorithm in this paper has precision and recall of 77% and 77% respectively, compared with 40% and 19% precision and recall on current activity monitoring algorithms intended for general daily living activities. Aside from classification, the user experience must be strong enough to be a successful system for adoption. Indeed, fast and intense activities as well as competitive, multiplayer environments make for a successful, enjoyable exergame. This enjoyment is evaluated through a 30 person user study. Multiple aspects of the exergaming user experience trials have been merged into a comprehensive survey, called ExerSurvey. All but one user thought the motions in the game were realistic and difficult to cheat. Ultimately, a game with near-realistic motions was shown to be an enjoyable, active video exergame for any environment. PMID:24608050

  7. Relating realist metatheory to issues of gender and mental health.

    PubMed

    Bergin, M; Wells, John S G; Owen, Sara

    2010-06-01

    This paper seeks to advance the debate that considers critical realism as an alternative approach for understanding gender and mental health and its relatedness to mental health research and practice. The knowledge base of how 'sex' and 'gender' affect mental health and illness is expanding. However, the way we conceptualize gender is significant and challenging as quite often our ability to think about 'gender' as independent of 'sex' is not common. The influences and interplay of how sex (biological) and gender (social) affect mental health and illness requires consideration. Critical realism suggests a shared ontology and epistemology for the natural and social sciences. While much of the debate surrounding gender is guided within a constructivist discourse, an exploration of the concept 'gender' is reflected on and some key realist propositions are considered for mental health research and practice. This is achieved through the works of some key realist theorists. Critical realism offers potential for research and practice in relation to gender and mental health because it facilitates changes in our understanding, while simultaneously, not discarding that which is already known. In so doing, it allows the biological (sex) and social (gender) domains of knowledge for mental health and illness to coexist, without either being reduced to or defined by the other. Arguably, greater depth and explanations for gender and mental health issues are presented within a realist metatheory. PMID:20584241

  8. An anatomically realistic temperature phantom for radiofrequency heating measurements

    PubMed Central

    Graedel, Nadine N.; Polimeni, Jonathan R.; Guerin, Bastien; Gagoski, Borjan; Wald, Lawrence L.

    2014-01-01

    Purpose An anthropomorphic phantom with realistic electrical properties allows for a more accurate reproduction of tissue current patterns during excitation. A temperature map can then probe the worst-case heating expected in the un-perfused case. We describe an anatomically realistic human head phantom that allows rapid 3D temperature mapping at 7 T. Methods The phantom was based on hand-labeled anatomical imaging data and consists of four compartments matching the corresponding human tissues in geometry and electrical properties. The increases in temperature resulting from radiofrequency excitation were measured with MR thermometry using a temperature sensitive contrast agent (TmDOTMA−) validated by direct fiber optic temperature measurements. Results Acquisition of 3D temperature maps of the full phantom with a temperature accuracy better than 0.1°C was achieved with an isotropic resolution of 5 mm and acquisition times of 2–4 minutes. Conclusion Our results demonstrate the feasibility of constructing anatomically realistic phantoms with complex geometries incorporating the ability to measure accurate temperature maps in the phantom. The anthropomorphic temperature phantom is expected to provide a useful tool for the evaluation of the heating effects of both conventional and parallel transmit pulses and help validate electromagnetic and temperature simulations. PMID:24549755

  9. Depigmented Skin and Phantom Color Measurements for Realistic Prostheses

    PubMed Central

    Tanner, Paul; Leachman, Sancy; Boucher, Kenneth; Ozçelik, Tunçer Burak

    2013-01-01

    Purpose The purpose of this study was to test the hypothesis that regardless of human skin phototype, areas of depigmented skin, as seen in vitiligo, are optically indistinguishable among skin phototypes. The average of the depigmented skin measurements can be used to develop the base color of realistic prostheses. Methods and Materials Data from 20 of 32 recruited vitiligo study participants. Diffuse reflectance spectroscopy measurements were made from depigmented skin and adjacent pigmented skin, then compared to 66 pigmented polydimethylsiloxane phantoms to determine pigment concentrations in turbid media for making realistic facial prostheses. Results The Area Under spectral intensity Curve (AUC) was calculated for average spectroscopy measurements of pigmented sites in relation to skin phototype (p=0.0505) and depigmented skin in relation to skin phototype (p=0.59). No significant relationship exists between skin phototypes and depigmented skin spectroscopy measurements. The average of the depigmented skin measurements (AUC 19,129) was the closest match to phantom 6.4 (AUC 19,162) Conclusions Areas of depigmented skin are visibly indistinguishable per skin phototype, yet spectrometry shows that depigmented skin measurements varied and were unrelated to skin phototype. Possible sources of optical variation of depigmented skin include age, body site, blood flow, quantity/quality of collagen, and other chromophores. The average of all depigmented skin measurements can be used to derive the pigment composition and concentration for realistic facial prostheses. PMID:23750920

  10. Realistic terrain visualization based on 3D virtual world technology

    NASA Astrophysics Data System (ADS)

    Huang, Fengru; Lin, Hui; Chen, Bin; Xiao, Cai

    2010-11-01

    The rapid advances in information technologies, e.g., network, graphics processing, and virtual world, have provided challenges and opportunities for new capabilities in information systems, Internet applications, and virtual geographic environments, especially geographic visualization and collaboration. In order to achieve meaningful geographic capabilities, we need to explore and understand how these technologies can be used to construct virtual geographic environments to help to engage geographic research. The generation of three-dimensional (3D) terrain plays an important part in geographical visualization, computer simulation, and virtual geographic environment applications. The paper introduces concepts and technologies of virtual worlds and virtual geographic environments, explores integration of realistic terrain and other geographic objects and phenomena of natural geographic environment based on SL/OpenSim virtual world technologies. Realistic 3D terrain visualization is a foundation of construction of a mirror world or a sand box model of the earth landscape and geographic environment. The capabilities of interaction and collaboration on geographic information are discussed as well. Further virtual geographic applications can be developed based on the foundation work of realistic terrain visualization in virtual environments.

  11. Realistic terrain visualization based on 3D virtual world technology

    NASA Astrophysics Data System (ADS)

    Huang, Fengru; Lin, Hui; Chen, Bin; Xiao, Cai

    2009-09-01

    The rapid advances in information technologies, e.g., network, graphics processing, and virtual world, have provided challenges and opportunities for new capabilities in information systems, Internet applications, and virtual geographic environments, especially geographic visualization and collaboration. In order to achieve meaningful geographic capabilities, we need to explore and understand how these technologies can be used to construct virtual geographic environments to help to engage geographic research. The generation of three-dimensional (3D) terrain plays an important part in geographical visualization, computer simulation, and virtual geographic environment applications. The paper introduces concepts and technologies of virtual worlds and virtual geographic environments, explores integration of realistic terrain and other geographic objects and phenomena of natural geographic environment based on SL/OpenSim virtual world technologies. Realistic 3D terrain visualization is a foundation of construction of a mirror world or a sand box model of the earth landscape and geographic environment. The capabilities of interaction and collaboration on geographic information are discussed as well. Further virtual geographic applications can be developed based on the foundation work of realistic terrain visualization in virtual environments.

  12. Exposure Render: An Interactive Photo-Realistic Volume Rendering Framework

    PubMed Central

    Kroes, Thomas; Post, Frits H.; Botha, Charl P.

    2012-01-01

    The field of volume visualization has undergone rapid development during the past years, both due to advances in suitable computing hardware and due to the increasing availability of large volume datasets. Recent work has focused on increasing the visual realism in Direct Volume Rendering (DVR) by integrating a number of visually plausible but often effect-specific rendering techniques, for instance modeling of light occlusion and depth of field. Besides yielding more attractive renderings, especially the more realistic lighting has a positive effect on perceptual tasks. Although these new rendering techniques yield impressive results, they exhibit limitations in terms of their exibility and their performance. Monte Carlo ray tracing (MCRT), coupled with physically based light transport, is the de-facto standard for synthesizing highly realistic images in the graphics domain, although usually not from volumetric data. Due to the stochastic sampling of MCRT algorithms, numerous effects can be achieved in a relatively straight-forward fashion. For this reason, we have developed a practical framework that applies MCRT techniques also to direct volume rendering (DVR). With this work, we demonstrate that a host of realistic effects, including physically based lighting, can be simulated in a generic and flexible fashion, leading to interactive DVR with improved realism. In the hope that this improved approach to DVR will see more use in practice, we have made available our framework under a permissive open source license. PMID:22768292

  13. Two flavor QCD and confinement

    SciTech Connect

    D'Elia, Massimo; Di Giacomo, Adriano; Pica, Claudio

    2005-12-01

    We argue that the order of the chiral transition for N{sub f}=2 is a sensitive probe of the QCD vacuum, in particular, of the mechanism of color confinement. A strategy is developed to investigate the order of the transition by use of finite size scaling analysis. An in-depth numerical investigation is performed with staggered fermions on lattices with L{sub t}=4 and L{sub s}=12, 16, 20, 24, 32 and quark masses am{sub q} ranging from 0.01335 to 0.307036. The specific heat and a number of susceptibilities are measured and compared with the expectations of an O(4) second order and of a first order phase transition. A detailed comparison with previous works, which all use similar techniques as ours, is performed. A second order transition in the O(4) and O(2) universality classes are incompatible with our data, which seem to prefer a first order transition. However we have L{sub t}=4 and unimproved action, so that a check with improved techniques (algorithm and action) and possibly larger L{sub t} will be needed to assess this issue on a firm basis.

  14. Cell Migration in Confined Environments

    PubMed Central

    Irimia, Daniel

    2014-01-01

    We describe a protocol for measuring the speed of human neutrophils migrating through small channels, in conditions of mechanical confinement comparable to those experienced by neutrophils migrating through tissues. In such conditions, we find that neutrophils move persistently, at constant speed for tens of minutes, enabling precise measurements at single cells resolution, for large number of cells. The protocol relies on microfluidic devices with small channels in which a solution of chemoattractant and a suspension of isolated neutrophils are loaded in sequence. The migration of neutrophils can be observed for several hours, starting within minutes after loading the neutrophils in the devices. The protocol is divided into four main steps: the fabrication of the microfluidic devices, the separation of neutrophils from whole blood, the preparation of the assay and cell loading, and the analysis of data. We discuss the practical steps for the implementation of the migration assays in biology labs, the adaptation of the protocols to various cell types, including cancer cells, and the supplementary device features required for precise measurements of directionality and persistence during migration. PMID:24560508

  15. A realistic evaluation: the case of protocol-based care

    PubMed Central

    2010-01-01

    Background 'Protocol based care' was envisioned by policy makers as a mechanism for delivering on the service improvement agenda in England. Realistic evaluation is an increasingly popular approach, but few published examples exist, particularly in implementation research. To fill this gap, within this paper we describe the application of a realistic evaluation approach to the study of protocol-based care, whilst sharing findings of relevance about standardising care through the use of protocols, guidelines, and pathways. Methods Situated between positivism and relativism, realistic evaluation is concerned with the identification of underlying causal mechanisms, how they work, and under what conditions. Fundamentally it focuses attention on finding out what works, for whom, how, and in what circumstances. Results In this research, we were interested in understanding the relationships between the type and nature of particular approaches to protocol-based care (mechanisms), within different clinical settings (context), and what impacts this resulted in (outcomes). An evidence review using the principles of realist synthesis resulted in a number of propositions, i.e., context, mechanism, and outcome threads (CMOs). These propositions were then 'tested' through multiple case studies, using multiple methods including non-participant observation, interviews, and document analysis through an iterative analysis process. The initial propositions (conjectured CMOs) only partially corresponded to the findings that emerged during analysis. From the iterative analysis process of scrutinising mechanisms, context, and outcomes we were able to draw out some theoretically generalisable features about what works, for whom, how, and what circumstances in relation to the use of standardised care approaches (refined CMOs). Conclusions As one of the first studies to apply realistic evaluation in implementation research, it was a good fit, particularly given the growing emphasis on

  16. Model of lifetimes of the outer radiation belt electrons in a realistic magnetic field using realistic chorus wave parameters

    NASA Astrophysics Data System (ADS)

    Orlova, Ksenia; Shprits, Yuri

    2014-02-01

    The outer radiation belt electrons in the inner magnetosphere show high variability during the geomagnetically disturbed conditions. Quasi-linear diffusion theory provides both a framework for global prediction of particle loss at different energies and an understanding of the dynamics of different particle populations. It has been recently shown that the pitch angle scattering of electrons due to wave-particle interaction with chorus waves modeled in a realistic magnetic field may be significantly different from those estimated in a dipole model. In this work, we present the lifetimes of 1 keV-2 MeV electrons computed in the Tsyganenko 89 magnetic field model for the night, dawn, prenoon, and postnoon magnetic local time (MLT) sectors for different levels of geomagnetic activity and distances. The lifetimes in the realistic field are also compared to those computed in the dipole model. We develop a realistic chorus lower band and upper band wave models for each MLT sector using the recent statistical studies of wave amplitude, wave normal angle, and wave spectral density distributions as functions of magnetic latitude, distance, and Kp index. The increase of plasma trough density with increasing latitude is also included. The obtained in the Tsyganenko 89 field electron lifetimes are parameterized and can be used in 2-D/3-D/4-D convection and particle tracing codes.

  17. Aerofractures in Confined Granular Media

    NASA Astrophysics Data System (ADS)

    Eriksen, Fredrik K.; Turkaya, Semih; Toussaint, Renaud; Måløy, Knut J.; Flekkøy, Eirik G.

    2015-04-01

    We will present the optical analysis of experimental aerofractures in confined granular media. The study of this generic process may have applications in industries involving hydraulic fracturing of tight rocks, safe construction of dams, tunnels and mines, and in earth science where phenomena such as mud volcanoes and sand injectites are results of subsurface sediment displacements driven by fluid overpressure. It is also interesting to increase the understanding the flow instability itself, and how the fluid flow impacts the solid surrounding fractures and in the rest of the sample. Such processes where previously studied numerically [Niebling 2012a, Niebling 2012b] or in circular geometries. We will here explore experimentally linear geometries. We study the fracturing patterns that form when air flows into a dense, non-cohesive porous medium confined in a Hele-Shaw cell - i.e. into a packing of dry 80 micron beads placed between two glass plates separated by ~1mm. The cell is rectangular and fitted with a semi-permeable boundary to the atmosphere - blocking beads but not air - on one short edge, while the other three edges are impermeable. The porous medium is packed inside the cell between the semi-permeable boundary and an empty volume at the sealed side where the air pressure can be set and kept at a constant overpressure (1-2bar). Thus, for the air trapped inside the cell to release the overpressure it has to move through the solid. At high enough overpressures the air flow deforms the solid and increase permeability in some regions along the air-solid interface, which results in unstable flow and aerofracturing. Aerofractures are thought to be an analogue to hydrofractures, and an advantage of performing aerofracturing experiments in a Hele-Shaw cell is that the fracturing process can easily be observed in the lab. Our experiments are recorded with a high speed camera with a framerate of 1000 frames per second. In the analysis, by using various image

  18. Mobility in geometrically confined membranes.

    PubMed

    Domanov, Yegor A; Aimon, Sophie; Toombes, Gilman E S; Renner, Marianne; Quemeneur, François; Triller, Antoine; Turner, Matthew S; Bassereau, Patricia

    2011-08-01

    Lipid and protein lateral mobility is essential for biological function. Our theoretical understanding of this mobility can be traced to the seminal work of Saffman and Delbrück, who predicted a logarithmic dependence of the protein diffusion coefficient (i) on the inverse of the size of the protein and (ii) on the "membrane size" for membranes of finite size [Saffman P, Delbrück M (1975) Proc Natl Acad Sci USA 72:3111-3113]. Although the experimental proof of the first prediction is a matter of debate, the second has not previously been thought to be experimentally accessible. Here, we construct just such a geometrically confined membrane by forming lipid bilayer nanotubes of controlled radii connected to giant liposomes. We followed the diffusion of individual molecules in the tubular membrane using single particle tracking of quantum dots coupled to lipids or voltage-gated potassium channels KvAP, while changing the membrane tube radius from approximately 250 to 10 nm. We found that both lipid and protein diffusion was slower in tubular membranes with smaller radii. The protein diffusion coefficient decreased as much as 5-fold compared to diffusion on the effectively flat membrane of the giant liposomes. Both lipid and protein diffusion data are consistent with the predictions of a hydrodynamic theory that extends the work of Saffman and Delbrück to cylindrical geometries. This study therefore provides strong experimental support for the ubiquitous Saffman-Delbrück theory and elucidates the role of membrane geometry and size in regulating lateral diffusion. PMID:21768336

  19. Review of Inertial Confinement Fusion

    NASA Astrophysics Data System (ADS)

    Haines, M. G.

    The physics of inertial confinement fusion is reviewed. The trend to short-wavelength lasers is argued, and the distinction between direct and indirect (soft X-ray) drive is made. Key present issues include the non-linear growth of Rayleigh-Taylor (R-T) instabilities, the seeding of this instability by the initial laser imprint, the relevance of self-generated magnetic fields, and the importance of parametric instabilities (stimulated Brillouin and Raman scattering) in gas-filled hohlraums. Experiments are reviewed which explore the R-T instability in both planar and converging geometry. The employment of various optical smoothing techniques is contrasted with the overcoating of the capsule by gold coated plastic foams to reduce considerably the imprint problem. The role of spontaneously generated magnetic fields in non-symmetric plasmas is discussed. Recent hohlraum compression results are presented together with gas bag targets which replicate the long-scale-length low density plasmas expected in NIF gas filled hohlraums. The onset of first Brillouin and then Raman scattering is observed. The fast ignitor scheme is a proposal to use an intense short pulse laser to drill a hole through the coronal plasma and then, with laser excited fast electrons, create a propagating thermonuclear spark in a dense, relatively cold laser-compressed target. Some preliminary results of laser hole drilling and 2-D and 3-D PIC simulations of this and the > 10^8 Gauss self-generated magnetic fields are presented. The proposed National Ignition Facility (NIF) is described.

  20. Toroidal membrane vesicles in spherical confinement.

    PubMed

    Bouzar, Lila; Menas, Ferhat; Müller, Martin Michael

    2015-09-01

    We investigate the morphology of a toroidal fluid membrane vesicle confined inside a spherical container. The equilibrium shapes are assembled in a geometrical phase diagram as a function of scaled area and reduced volume of the membrane. For small area the vesicle can adopt its free form. When increasing the area, the membrane cannot avoid contact and touches the confining sphere along a circular contact line, which extends to a zone of contact for higher area. The elastic energies of the equilibrium shapes are compared to those of their confined counterparts of spherical topology to predict under which conditions a topology change is favored energetically. PMID:26465512

  1. DNA Partitioning in Confining Nanofluidic Slits

    NASA Astrophysics Data System (ADS)

    Greenier, Madeline; Levy, Stephen

    We measure the partitioning of double stranded DNA molecules in moderately and strongly confining nanofluidic slit-like structures. Using fluorescent microscopy, the free energy penalty of confinement is inferred by comparing the concentration of DNA molecules in adjoining slits of different depths. These depths range in size from several persistence lengths to the DNA molecule's radius of gyration. The partition coefficient is determined as a function of the slit depth, DNA contour length, and DNA topology. We compare our results to theory and Monte Carlo simulations that predict the loss of free energy for ideal and semiflexible excluded volume polymers confined between parallel plates.

  2. Propagating confined states in phase dynamics

    NASA Technical Reports Server (NTRS)

    Brand, Helmut R.; Deissler, Robert J.

    1992-01-01

    Theoretical treatment is given to the possibility of the existence of propagating confined states in the nonlinear phase equation by generalizing stationary confined states. The nonlinear phase equation is set forth for the case of propagating patterns with long wavelengths and low-frequency modulation. A large range of parameter values is shown to exist for propagating confined states which have spatially localized regions which travel on a background with unique wavelengths. The theoretical phenomena are shown to correspond to such physical systems as spirals in Taylor instabilities, traveling waves in convective systems, and slot-convection phenomena for binary fluid mixtures.

  3. Confinement of translated field-reversed configurations

    NASA Astrophysics Data System (ADS)

    Tuszewski, M.; Armstrong, W. T.; Chrien, R. E.; Klingner, P. L.; McKenna, K. F.; Rej, D. J.; Sherwood, E. G.; Siemon, R. E.

    1986-03-01

    The confinement properties of translating field-reversed configurations (FRC) in the FRX-C/T device [Phys. Fluids 29, (1986)] are analyzed and compared to previous data without translation and to available theory. Translation dynamics do not appear to appreciably modify the FRC confinement. Some empirical scaling laws with respect to various plasma parameters are extracted from the data. These are qualitatively similar to those obtained in the TRX-1 device [Phys. Fluids 28, 888 (1985)] without translation and with a different formation method. Translation with a static gas fill offers new opportunities such as improved particle confinement or refueling of the FRC particle inventory.

  4. Antiproton powered propulsion with magnetically confined plasma engines

    NASA Technical Reports Server (NTRS)

    Lapointe, Michael R.

    1989-01-01

    Matter-antimatter annihilation releases more energy per unit mass than any other method of energy production, making it an attractive energy source for spacecraft propulsion. In the magnetically confined plasma engine, antiproton beams are injected axially into a pulsed magnetic mirror system, where they annihilate with an initially neutral hydrogen gas. The resulting charged annihilation products transfer energy to the hydrogen propellant, which is then exhausted through one end of the pulsed mirror system to provide thrust. The calculated energy transfer efficiencies for a low number density (10(14)/cu cm) hydrogen propellant are insufficient to warrant operating the engine in this mode. Efficiencies are improved using moderate propellant number densities (10(16)/cu cm), but the energy transferred to the plasma in a realistic magnetic mirror system is generally limited to less than 2 percent of the initial proton-antiproton annihilation energy. The energy transfer efficiencies are highest for high number density (10(18)/cu cm) propellants, but plasma temperatures are reduced by excessive radiation losses. Low to moderate thrust over a wide range of specific impulse can be generated with moderate propellant number densities, while higher thrust but lower specific impulse may be generated using high propellant number densities. Significant mass will be required to shield the superconducting magnet coils from the high energy gamma radiation emitted by neutral pion decay. The mass of such a radiation shield may dominate the total engine mass, and could severely diminish the performance of antiproton powered engines which utilize magnetic confinement. The problem is compounded in the antiproton powered plasma engine, where lower energy plasma bremsstrahlung radiation may cause shield surface ablation and degradation.

  5. Antiproton powered propulsion with magnetically confined plasma engines

    SciTech Connect

    Lapointe, M.R.

    1989-08-01

    Matter-antimatter annihilation releases more energy per unit mass than any other method of energy production, making it an attractive energy source for spacecraft propulsion. In the magnetically confined plasma engine, antiproton beams are injected axially into a pulsed magnetic mirror system, where they annihilate with an initially neutral hydrogen gas. The resulting charged annihilation products transfer energy to the hydrogen propellant, which is then exhausted through one end of the pulsed mirror system to provide thrust. The calculated energy transfer efficiencies for a low number density (10(14)/cu cm) hydrogen propellant are insufficient to warrant operating the engine in this mode. Efficiencies are improved using moderate propellant number densities (10(16)/cu cm), but the energy transferred to the plasma in a realistic magnetic mirror system is generally limited to less than 2 percent of the initial proton-antiproton annihilation energy. The energy transfer efficiencies are highest for high number density (10(18)/cu cm) propellants, but plasma temperatures are reduced by excessive radiation losses. Low to moderate thrust over a wide range of specific impulse can be generated with moderate propellant number densities, while higher thrust but lower specific impulse may be generated using high propellant number densities. Significant mass will be required to shield the superconducting magnet coils from the high energy gamma radiation emitted by neutral pion decay. The mass of such a radiation shield may dominate the total engine mass, and could severely diminish the performance of antiproton powered engines which utilize magnetic confinement. The problem is compounded in the antiproton powered plasma engine, where lower energy plasma bremsstrahlung radiation may cause shield surface ablation and degradation.

  6. Large-System Transformation in Health Care: A Realist Review

    PubMed Central

    Best, Allan; Greenhalgh, Trisha; Lewis, Steven; Saul, Jessie E; Carroll, Simon; Bitz, Jennifer

    2012-01-01

    Context An evidence base that addresses issues of complexity and context is urgently needed for large-system transformation (LST) and health care reform. Fundamental conceptual and methodological challenges also must be addressed. The Saskatchewan Ministry of Health in Canada requested a six-month synthesis project to guide four major policy development and strategy initiatives focused on patient- and family-centered care, primary health care renewal, quality improvement, and surgical wait lists. The aims of the review were to analyze examples of successful and less successful transformation initiatives, to synthesize knowledge of the underlying mechanisms, to clarify the role of government, and to outline options for evaluation. Methods We used realist review, whose working assumption is that a particular intervention triggers particular mechanisms of change. Mechanisms may be more or less effective in producing their intended outcomes, depending on their interaction with various contextual factors. We explain the variations in outcome as the interplay between context and mechanisms. We nested this analytic approach in a macro framing of complex adaptive systems (CAS). Findings Our rapid realist review identified five “simple rules” of LST that were likely to enhance the success of the target initiatives: (1) blend designated leadership with distributed leadership; (2) establish feedback loops; (3) attend to history; (4) engage physicians; and (5) include patients and families. These principles play out differently in different contexts affecting human behavior (and thereby contributing to change) through a wide range of different mechanisms. Conclusions Realist review methodology can be applied in combination with a complex system lens on published literature to produce a knowledge synthesis that informs a prospective change effort in large-system transformation. A collaborative process engaging both research producers and research users contributes to local

  7. Structure of the singularity inside a realistic rotating black hole

    NASA Astrophysics Data System (ADS)

    Ori, Amos

    1992-04-01

    The structure and results of an analysis of the asymptotic behavior of nonlinear, asymmetric, metric perturbations near the Cauchy horizon inside a Kerr black hole are presented. This analysis suggests that metric perturbations, to all orders in the perturbation expansion, are finite and small at the Cauchy horizon, even though their gradients (and the curvature) diverge there. Accordingly, objects which fall into a realistic rotating blackhole a longtime after the collapse will not be crushed by a tidal gravitational deformations as they approach the curvature singularity.

  8. A continuous family of realistic Susy SU(5) GUTs

    NASA Astrophysics Data System (ADS)

    Bajc, Borut

    2016-06-01

    It is shown that the minimal renormalizable supersymmetric SU(5) is still realistic providing the supersymmetric scale is at least few tens of TeV or large R-parity violating terms are considered. In the first case the vacuum is metastable, and different consistency constraints can give a bounded allowed region in the tan β - msusy plane. In the second case the mass eigenstate electron (down quark) is a linear combination of the original electron (down quark) and Higgsino (heavy colour triplet), and the mass ratio of bino and wino is determined. Both limits lead to light gravitino dark matter.

  9. The KM phase in semi-realistic heterotic orbifold models

    SciTech Connect

    Giedt, Joel

    2000-07-05

    In string-inspired semi-realistic heterotic orbifolds models with an anomalous U(1){sub X},a nonzero Kobayashi-Masakawa (KM) phase is shown to arise generically from the expectation values of complex scalar fields, which appear in nonrenormalizable quark mass couplings. Modular covariant nonrenormalizable superpotential couplings are constructed. A toy Z{sub 3} orbifold model is analyzed in some detail. Modular symmetries and orbifold selection rules are taken into account and do not lead to a cancellation of the KM phase. We also discuss attempts to obtain the KM phase solely from renormalizable interactions.

  10. Analytical theory of extraordinary optical transmission through realistic metallic screens.

    PubMed

    Delgado, V; Marqués, R; Jelinek, L

    2010-03-29

    An analytical theory of extraordinary optical transmission (EOT) through realistic metallic screens perforated by a periodic array of subwavelength holes is presented. The theory is based on our previous work on EOT through perfect conducting screens and on the surface impedance concept. The proposed theory is valid for the complete frequency range where EOT has been reported, including microwaves and optics. A reasonably good agreement with electromagnetic simulations is shown in all this frequency range. We feel that the proposed theory may help to clarify the physics underlying EOT and serve as a first step to more accurate analysis. PMID:20389673

  11. Dynamic apeerture in damping rings with realistic wigglers

    SciTech Connect

    Cai, Yunhai; /SLAC

    2005-05-04

    The International Linear Collider based on superconducting RF cavities requires the damping rings to have extremely small equilibrium emittance, huge circumference, fast damping time, and large acceptance. To achieve all of these requirements is a very challenging task. In this paper, we will present a systematic approach to designing the damping rings using simple cells and non-interlaced sextupoles. The designs of the damping rings with various circumferences and shapes, including dogbone, are presented. To model realistic wigglers, we have developed a new hybrid symplectic integrator for faster and accurate evaluation of dynamic aperture of the lattices.

  12. Emergent properties from organisms to ecosystems: towards a realistic approach

    PubMed Central

    Ponge, Jean-François

    2005-01-01

    More realistic approaches are needed to understand the complexity of ecological systems. Emergent properties of real systems can be used as a basis for a new, neither reductionist nor holistic, approach. Three systems, termed here BUBBLEs, WAVEs and CRYSTALs, have been identified as exhibiting emergent properties. They are non-hierarchical assemblages of individual components, with amplification and connectedness being two main principles that govern their build-up, maintenance and mutual relationships. Examples from various fields of biological and ecological science are referred to, ranging from individual organisms to landscapes. PMID:16094806

  13. Optical Communications Performance with Realistic Weather and Automated Repeat Query

    NASA Astrophysics Data System (ADS)

    Clare, L.; Miles, G.; Breidenthal, J.

    2016-05-01

    Deep-space optical communications are subject to outages arising from deterministic clear line-of-sight dynamics as well as unpredictable weather effects at the ground station. These effects can be mitigated using buffering and automatic retransmission techniques. We provide an analysis that incorporates a realistic weather model based on a two-state Markov chain. Performance for a hypothetical Mars 2022 optical mission is derived incorporating dynamics over an entire 728-day synodic cycle, during which link passes and link data rate vary. Buffer sizing is addressed and operational implications are identified. Also, buffer occupancy results are extended for deep-space missions spanning a range of link data rates.

  14. Turbulence studies in Tokamak boundary plasmas with realistic divertor geometry

    SciTech Connect

    Xu, X.Q.

    1998-10-14

    Results are presented from the 3D nonlocal electromagnetic turbulence code BOUT [1] and the linearized shooting code BAL[2] to study turbulence in tokamak boundary plasmas and its relationship to the L-H transition, in a realistic divertor plasma geometry. The key results include: (1) the identification of the dominant, resistive X-point mode in divertor geometry and (2) turbulence suppression in the L-H transition by shear in the ExB drift speed, ion diamagnetism and finite polarization. Based on the simulation results, a parameterization of the transport is given that includes the dependence on the relevant physical parameters.

  15. Clusters of polyhedra in spherical confinement

    NASA Astrophysics Data System (ADS)

    Teich, Erin; van Anders, Greg; Klotsa, Daphne; Dshemuchadse, Julia; Glotzer, Sharon

    Dense particle packing in a confining volume is a rich, largely unexplored problem, with applications in blood clotting, plasmonics, industrial packaging and transport, colloidal molecule design, and information storage. We report simulation results for dense clusters of the Platonic solids in spherical confinement, for up to N = 60 constituent particles. We discuss similarities between clusters in terms of symmetry, a connection to spherical codes, and generally the interplay between isotropic geometrical confinement and anisotropic particle shape. Our results showcase the structural diversity and experimental utility of families of solutions to the problem of packing in confinement. E.T. acknowledges support by the National Science Foundation Graduate Research Fellowship under Grant No. DGE 1256260.

  16. Anisotropic de Gennes Narrowing in Confined Fluids.

    PubMed

    Nygård, Kim; Buitenhuis, Johan; Kagias, Matias; Jefimovs, Konstantins; Zontone, Federico; Chushkin, Yuriy

    2016-04-22

    The collective diffusion of dense fluids in spatial confinement is studied by combining high-energy (21 keV) x-ray photon correlation spectroscopy and small-angle x-ray scattering from colloid-filled microfluidic channels. We find the structural relaxation in confinement to be slower compared to the bulk. The collective dynamics is wave vector dependent, akin to the de Gennes narrowing typically observed in bulk fluids. However, in stark contrast to the bulk, the structure factor and de Gennes narrowing in confinement are anisotropic. These experimental observations are essential in order to develop a microscopic theoretical description of collective diffusion of dense fluids in confined geometries. PMID:27152823

  17. Diblock Copolymers under Nano-Confinement

    NASA Astrophysics Data System (ADS)

    Meng, Dong; Yin, Yuhua; Wang, Qiang

    2009-03-01

    Nano-confinement strongly affects and can thus be used to control the self-assembled morphology of block copolymers. Understanding such effects is of both fundamental and practical interest. In this work, we use real-space self-consistent field calculations with high accuracy to study the self-assembled morphology of diblock copolymers (DBC) under nano-confinement for several systems, including 1D lamellae-forming DBC confined between two homogeneous and parallel surfaces, in nano-pores, and on topologically patterned substrates; 2D cylinder-forming DBC on chemically strip-patterned substrates; and 3D gyroid- forming DBC confined between two homogeneous and parallel surfaces. The stable phases are identified through free-energy comparison, and our SCF results are compared with available experiments and Monte Carlo simulations in each case.

  18. Longitudinal response of confined semiflexible polymers

    NASA Astrophysics Data System (ADS)

    Thüroff, Florian; Obermayer, Benedikt; Frey, Erwin

    2011-02-01

    The longitudinal response of single semiflexible polymers to sudden changes in externally applied forces is known to be controlled by the propagation and relaxation of backbone tension. Under many experimental circumstances, realized, for example, in nanofluidic devices or in polymeric networks or solutions, these polymers are effectively confined in a channel- or tubelike geometry. By means of heuristic scaling laws and rigorous analytical theory, we analyze the tension dynamics of confined semiflexible polymers for various generic experimental setups. It turns out that in contrast to the well-known linear response, the influence of confinement on the nonlinear dynamics can largely be described as that of an effective prestress. We also study the free relaxation of an initially confined chain, finding a surprising superlinear ~t9/8 growth law for the change in end-to-end distance at short times.

  19. Colloidal cholesteric liquid crystal in spherical confinement.

    PubMed

    Li, Yunfeng; Jun-Yan Suen, Jeffrey; Prince, Elisabeth; Larin, Egor M; Klinkova, Anna; Thérien-Aubin, Héloïse; Zhu, Shoujun; Yang, Bai; Helmy, Amr S; Lavrentovich, Oleg D; Kumacheva, Eugenia

    2016-01-01

    The organization of nanoparticles in constrained geometries is an area of fundamental and practical importance. Spherical confinement of nanocolloids leads to new modes of packing, self-assembly, phase separation and relaxation of colloidal liquids; however, it remains an unexplored area of research for colloidal liquid crystals. Here we report the organization of cholesteric liquid crystal formed by nanorods in spherical droplets. For cholesteric suspensions of cellulose nanocrystals, with progressive confinement, we observe phase separation into a micrometer-size isotropic droplet core and a cholesteric shell formed by concentric nanocrystal layers. Further confinement results in a transition to a bipolar planar cholesteric morphology. The distribution of polymer, metal, carbon or metal oxide nanoparticles in the droplets is governed by the nanoparticle size and yields cholesteric droplets exhibiting fluorescence, plasmonic properties and magnetic actuation. This work advances our understanding of how the interplay of order, confinement and topological defects affects the morphology of soft matter. PMID:27561545

  20. Human Adaptation To Isolated And Confined Environments

    NASA Technical Reports Server (NTRS)

    Evans, Gary W.; Stokols, Daniel; Carrere, Sna Sybil

    1992-01-01

    Data from Antarctic research station analyzed. Report describes study of physiology and psychology of humans in isolated and confined environment. Suggests ways in which such environments made more acceptable to human inhabitants.

  1. Colloidal cholesteric liquid crystal in spherical confinement

    PubMed Central

    Li, Yunfeng; Jun-Yan Suen, Jeffrey; Prince, Elisabeth; Larin, Egor M.; Klinkova, Anna; Thérien-Aubin, Héloïse; Zhu, Shoujun; Yang, Bai; Helmy, Amr S.; Lavrentovich, Oleg D.; Kumacheva, Eugenia

    2016-01-01

    The organization of nanoparticles in constrained geometries is an area of fundamental and practical importance. Spherical confinement of nanocolloids leads to new modes of packing, self-assembly, phase separation and relaxation of colloidal liquids; however, it remains an unexplored area of research for colloidal liquid crystals. Here we report the organization of cholesteric liquid crystal formed by nanorods in spherical droplets. For cholesteric suspensions of cellulose nanocrystals, with progressive confinement, we observe phase separation into a micrometer-size isotropic droplet core and a cholesteric shell formed by concentric nanocrystal layers. Further confinement results in a transition to a bipolar planar cholesteric morphology. The distribution of polymer, metal, carbon or metal oxide nanoparticles in the droplets is governed by the nanoparticle size and yields cholesteric droplets exhibiting fluorescence, plasmonic properties and magnetic actuation. This work advances our understanding of how the interplay of order, confinement and topological defects affects the morphology of soft matter. PMID:27561545

  2. Speeding up of sedimentation under confinement.

    PubMed

    Heitkam, S; Yoshitake, Y; Toquet, F; Langevin, D; Salonen, A

    2013-04-26

    We show an increase of the sedimentation velocity as small particles are confined in circular capillaries. In general, confinement slows down sedimentation. But, we show that at low Reynolds numbers and in 1D confinement this is not the case. Particle sedimentation velocity is not homogeneous, which can lead to the formation of structures. These structures are enhanced and stabilized in the presence of walls and in the absence of other dissipative mechanisms. As a consequence, it is possible to achieve sedimentation velocities that even exceed the Stokes velocity. The segregation at critical capillary diameters has been directly observed using a large scale model. These simple experiments offer a new insight into the old problem of sedimentation under confinement. PMID:23679787

  3. The Physics Basis of ITER Confinement

    SciTech Connect

    Wagner, F.

    2009-02-19

    ITER will be the first fusion reactor and the 50 year old dream of fusion scientists will become reality. The quality of magnetic confinement will decide about the success of ITER, directly in the form of the confinement time and indirectly because it decides about the plasma parameters and the fluxes, which cross the separatrix and have to be handled externally by technical means. This lecture portrays some of the basic principles which govern plasma confinement, uses dimensionless scaling to set the limits for the predictions for ITER, an approach which also shows the limitations of the predictions, and describes briefly the major characteristics and physics behind the H-mode--the preferred confinement regime of ITER.

  4. Programmed environment management of confined microsocieties

    NASA Technical Reports Server (NTRS)

    Emurian, Henry H.

    1988-01-01

    A programmed environment is described that assists the implementation and management of schedules governing access to all resources and information potentially available to members of a confined microsociety. Living and work schedules are presented that were designed to build individual and group performance repertoires in support of study objectives and sustained adaptation by participants. A variety of measurement requirements can be programmed and standardized to assure continuous assessment of the status and health of a confined microsociety.

  5. Quark propagators in confinement and deconfinement phases

    SciTech Connect

    Hamada, Masatoshi; Yahiro, Masanobu; Kouno, Hiroaki; Nakamura, Atsushi; Saito, Takuya

    2010-05-01

    We study quark propagators near the confinement/deconfinement phase transition temperature in quenched-lattice simulation of QCD. We find that there is no qualitative change for the quark propagators in both phases. In the confinement phase, those effective quark masses in units of the critical temperature behave as a constant as a function of the temperature, while above the critical temperature, the value of the effective quark mass drops to circa half value.

  6. Bifurcated equilibria in centrifugally confined plasma

    SciTech Connect

    Shamim, I.; Teodorescu, C.; Guzdar, P. N.; Hassam, A. B.; Clary, R.; Ellis, R.; Lunsford, R.

    2008-12-15

    A bifurcation theory and associated computational model are developed to account for abrupt transitions observed recently on the Maryland Centrifugal eXperiment (MCX) [R. F. Ellis et al. Phys. Plasmas 8, 2057 (2001)], a supersonically rotating magnetized plasma that relies on centrifugal forces to prevent thermal expansion of plasma along the magnetic field. The observed transitions are from a well-confined, high-rotation state (HR-mode) to a lower-rotation, lesser-confined state (O-mode). A two-dimensional time-dependent magnetohydrodynamics code is used to simulate the dynamical equilibrium states of the MCX configuration. In addition to the expected viscous drag on the core plasma rotation, a momentum loss term is added that models the friction of plasma on the enhanced level of neutrals expected in the vicinity of the insulators at the throats of the magnetic mirror geometry. At small values of the external rotation drive, the plasma is not well-centrifugally confined and hence experiences the drag from near the insulators. Beyond a critical value of the external drive, the system makes an abrupt transition to a well-centrifugally confined state in which the plasma has pulled away from the end insulator plates; more effective centrifugal confinement lowers the plasma mass near the insulators allowing runaway increases in the rotation speed. The well-confined steady state is reached when the external drive is balanced by only the viscosity of the core plasma. A clear hysteresis phenomenon is shown.

  7. Spin-Orbit Activated Confinement Resonances

    NASA Astrophysics Data System (ADS)

    Keating, David; Manson, Steven; Deshmukh, Pranawa

    2016-05-01

    At high enough Z relativistic effects become important contributors to even the qualitative nature of atomic properties. This is likely to be true for confined atoms as well. One relativistic effect of interest is the spin-orbit activated interchannel coupling of a pair of spin-orbit doublet channels. This interaction is possible owing to the spin-orbit interaction breaking the degenerancy among the electrons of a subshell allowing, for example, the 5p3/2 and 5p1/2 subshells of mercury (Z = 80) and the 6p3/2 and 6p1/2 of radon (Z = 86), to interact. To explore the effect confinement has on spin-orbit activated interchannel coupling, a theoretical study of the 5p subshell of mercury and the 6p subshell of radon both confined in a C60 cage has been performed using the relativistic-random-phase approximation (RRPA) methodology. The effects of the C60 potential modeled by a static spherical well which is reasonable in the energy region well above the C60 plasmons. It is found in the photoionization cross sections of the 5p3/2 of confined mercury and the 6p3/2 of confined radon an extra confinement resonance due to spin-orbit activated interchannel coupling with the respective np1/2 photoionization channels.

  8. Explicit modeling of human-object interactions in realistic videos.

    PubMed

    Prest, Alessandro; Ferrari, Vittorio; Schmid, Cordelia

    2013-04-01

    We introduce an approach for learning human actions as interactions between persons and objects in realistic videos. Previous work typically represents actions with low-level features such as image gradients or optical flow. In contrast, we explicitly localize in space and track over time both the object and the person, and represent an action as the trajectory of the object w.r.t. to the person position. Our approach relies on state-of-the-art techniques for human detection, object detection, and tracking. We show that this results in human and object tracks of sufficient quality to model and localize human-object interactions in realistic videos. Our human-object interaction features capture the relative trajectory of the object w.r.t. the human. Experimental results on the Coffee and Cigarettes dataset, the video dataset of, and the Rochester Daily Activities dataset show that 1) our explicit human-object model is an informative cue for action recognition; 2) it is complementary to traditional low-level descriptors such as 3D--HOG extracted over human tracks. We show that combining our human-object interaction features with 3D-HOG improves compared to their individual performance as well as over the state of the art. PMID:22889819

  9. Generation of anatomically realistic numerical phantoms for optoacoustic breast imaging

    NASA Astrophysics Data System (ADS)

    Lou, Yang; Mitsuhashi, Kenji; Appleton, Catherine M.; Oraevsky, Alexander; Anastasio, Mark A.

    2016-03-01

    Because optoacoustic tomography (OAT) can provide functional information based on hemoglobin contrast, it is a promising imaging modality for breast cancer diagnosis. Developing an effective OAT breast imaging system requires balancing multiple design constraints, which can be expensive and time-consuming. Therefore, computer- simulation studies are often conducted to facilitate this task. However, most existing computer-simulation studies of OAT breast imaging employ simple phantoms such as spheres or cylinders that over-simplify the complex anatomical structures in breasts, thus limiting the value of these studies in guiding real-world system design. In this work, we propose a method to generate realistic numerical breast phantoms for OAT research based on clinical magnetic resonance imaging (MRI) data. The phantoms include a skin layer that defines breast-air boundary, major vessel branches that affect light absorption in the breast, and fatty tissue and fibroglandular tissue whose acoustical heterogeneity perturbs acoustic wave propagation. By assigning realistic optical and acoustic parameters to different tissue types, we establish both optic and acoustic breast phantoms, which will be exported into standard data formats for cross-platform usage.

  10. Realistic simulation of the Space-borne Compton Polarimeter POLAR

    NASA Astrophysics Data System (ADS)

    Xiao, Hualin

    2016-07-01

    POLAR is a compact wide field space-borne detector dedicated for precise measurements of the linear polarization of hard x-rays emitted by transient sources. Its energy range sensitivity is optimized for the detection of the prompt emission of Gamma-ray bursts (GRBs). POLAR is developed by an international collaboration of China, Switzerland and Poland. It is planned to be launched into space in 2016 onboard the Chinese space laboratory TG2. The energy range of POLAR spans between 50 keV and 500 keV. POLAR detects gamma rays with an array of 1600 plastic scintillator bars read out by 25 muti-anode PMTs (MAPMTs). Polarization measurements use Compton scattering process and are based on detection of energy depositions in the scintillator bars. Reconstruction of the polarization degree and polarization angle of GRBs requires comparison of experimental modulation curves with realistic simulations of the full instrument response. In this paper we present a method to model and parameterize the detector response including efficiency of the light collection, contributions from crosstalk and non-uniformity of MAPMTs as well as dependency on low energy detection thresholds and noise from readout electronics. The performance of POLAR for determination of polarization is predicted with such realistic simulations and carefully cross-checked with dedicated laboratory tests.

  11. Radiation-Spray Coupling for Realistic Flow Configurations

    NASA Technical Reports Server (NTRS)

    El-Asrag, Hossam; Iannetti, Anthony C.

    2011-01-01

    Three Large Eddy Simulations (LES) for a lean-direct injection (LDI) combustor are performed and compared. In addition to the cold flow simulation, the effect of radiation coupling with the multi-physics reactive flow is analyzed. The flame let progress variable approach is used as a subgrid combustion model combined with a stochastic subgrid model for spray atomization and an optically thin radiation model. For accurate chemistry modeling, a detailed Jet-A surrogate mechanism is utilized. To achieve realistic inflow, a simple recycling technique is performed at the inflow section upstream of the swirler. Good comparison is shown with the experimental data mean and root mean square profiles. The effect of combustion is found to change the shape and size of the central recirculation zone. Radiation is found to change the spray dynamics and atomization by changing the heat release distribution and the local temperature values impacting the evaporation process. The simulation with radiation modeling shows wider range of droplet size distribution by altering the evaporation rate. The current study proves the importance of radiation modeling for accurate prediction in realistic spray combustion configurations, even for low pressure systems.

  12. Simulation of Combustion Systems with Realistic g-Jitter

    NASA Technical Reports Server (NTRS)

    Mell, William E.; McGrattan, Kevin B.; Baum, Howard R.

    1999-01-01

    A number of facilities are available for microgravity combustion experiments: aircraft, drop tower, sounding rocket, space shuttle and, in the future, the international space station (ISS). Acceleration disturbances or g-jitter about the background level of reduced gravity exist in all the microgravity facilities. While g-jitter is routinely measured, a quantitative comparison of the quality of g-jitter among the different microgravity facilities has not been compiled. Low frequency g-jitter (< 1 Hz) has been repeatedly observed to disturb a number of combustion systems. Guidelines regarding tolerable levels of acceleration disturbances for a given combustion system have been developed for use in the design of ISS experiments. The validity of these guidelines, however, remains unknown. In this project, recently funded by NASA, a transient, fully three-dimensional simulation code will be developed to simulate the effects of realistic g-jitter on a number of combustion systems. Acceleration disturbances of realistic orientation, magnitude and time dependence will be included in the simulation. Since this is a newly funded project with code development just under-way no simulation results will be presented. Instead, first a short review of the relevant background concerning g-jitter will be given followed by a section on the proposed technical approach.

  13. Ultra-realistic 3-D imaging based on colour holography

    NASA Astrophysics Data System (ADS)

    Bjelkhagen, H. I.

    2013-02-01

    A review of recent progress in colour holography is provided with new applications. Colour holography recording techniques in silver-halide emulsions are discussed. Both analogue, mainly Denisyuk colour holograms, and digitally-printed colour holograms are described and their recent improvements. An alternative to silver-halide materials are the panchromatic photopolymer materials such as the DuPont and Bayer photopolymers which are covered. The light sources used to illuminate the recorded holograms are very important to obtain ultra-realistic 3-D images. In particular the new light sources based on RGB LEDs are described. They show improved image quality over today's commonly used halogen lights. Recent work in colour holography by holographers and companies in different countries around the world are included. To record and display ultra-realistic 3-D images with perfect colour rendering are highly dependent on the correct recording technique using the optimal recording laser wavelengths, the availability of improved panchromatic recording materials and combined with new display light sources.

  14. CHARMM-GUI Membrane Builder toward realistic biological membrane simulations.

    PubMed

    Wu, Emilia L; Cheng, Xi; Jo, Sunhwan; Rui, Huan; Song, Kevin C; Dávila-Contreras, Eder M; Qi, Yifei; Lee, Jumin; Monje-Galvan, Viviana; Venable, Richard M; Klauda, Jeffery B; Im, Wonpil

    2014-10-15

    CHARMM-GUI Membrane Builder, http://www.charmm-gui.org/input/membrane, is a web-based user interface designed to interactively build all-atom protein/membrane or membrane-only systems for molecular dynamics simulations through an automated optimized process. In this work, we describe the new features and major improvements in Membrane Builder that allow users to robustly build realistic biological membrane systems, including (1) addition of new lipid types, such as phosphoinositides, cardiolipin (CL), sphingolipids, bacterial lipids, and ergosterol, yielding more than 180 lipid types, (2) enhanced building procedure for lipid packing around protein, (3) reliable algorithm to detect lipid tail penetration to ring structures and protein surface, (4) distance-based algorithm for faster initial ion displacement, (5) CHARMM inputs for P21 image transformation, and (6) NAMD equilibration and production inputs. The robustness of these new features is illustrated by building and simulating a membrane model of the polar and septal regions of E. coli membrane, which contains five lipid types: CL lipids with two types of acyl chains and phosphatidylethanolamine lipids with three types of acyl chains. It is our hope that CHARMM-GUI Membrane Builder becomes a useful tool for simulation studies to better understand the structure and dynamics of proteins and lipids in realistic biological membrane environments. PMID:25130509

  15. Electron percolation in realistic models of carbon nanotube networks

    NASA Astrophysics Data System (ADS)

    Simoneau, Louis-Philippe; Villeneuve, Jérémie; Rochefort, Alain

    2015-09-01

    The influence of penetrable and curved carbon nanotubes (CNT) on the charge percolation in three-dimensional disordered CNT networks have been studied with Monte-Carlo simulations. By considering carbon nanotubes as solid objects but where the overlap between their electron cloud can be controlled, we observed that the structural characteristics of networks containing lower aspect ratio CNT are highly sensitive to the degree of penetration between crossed nanotubes. Following our efficient strategy to displace CNT to different positions to create more realistic statistical models, we conclude that the connectivity between objects increases with the hard-core/soft-shell radii ratio. In contrast, the presence of curved CNT in the random networks leads to an increasing percolation threshold and to a decreasing electrical conductivity at saturation. The waviness of CNT decreases the effective distance between the nanotube extremities, hence reducing their connectivity and degrading their electrical properties. We present the results of our simulation in terms of thickness of the CNT network from which simple structural parameters such as the volume fraction or the carbon nanotube density can be accurately evaluated with our more realistic models.

  16. Simulating realistic predator signatures in quantitative fatty acid signature analysis

    USGS Publications Warehouse

    Bromaghin, Jeffrey F.

    2015-01-01

    Diet estimation is an important field within quantitative ecology, providing critical insights into many aspects of ecology and community dynamics. Quantitative fatty acid signature analysis (QFASA) is a prominent method of diet estimation, particularly for marine mammal and bird species. Investigators using QFASA commonly use computer simulation to evaluate statistical characteristics of diet estimators for the populations they study. Similar computer simulations have been used to explore and compare the performance of different variations of the original QFASA diet estimator. In both cases, computer simulations involve bootstrap sampling prey signature data to construct pseudo-predator signatures with known properties. However, bootstrap sample sizes have been selected arbitrarily and pseudo-predator signatures therefore may not have realistic properties. I develop an algorithm to objectively establish bootstrap sample sizes that generates pseudo-predator signatures with realistic properties, thereby enhancing the utility of computer simulation for assessing QFASA estimator performance. The algorithm also appears to be computationally efficient, resulting in bootstrap sample sizes that are smaller than those commonly used. I illustrate the algorithm with an example using data from Chukchi Sea polar bears (Ursus maritimus) and their marine mammal prey. The concepts underlying the approach may have value in other areas of quantitative ecology in which bootstrap samples are post-processed prior to their use.

  17. Electron percolation in realistic models of carbon nanotube networks

    SciTech Connect

    Simoneau, Louis-Philippe Villeneuve, Jérémie Rochefort, Alain

    2015-09-28

    The influence of penetrable and curved carbon nanotubes (CNT) on the charge percolation in three-dimensional disordered CNT networks have been studied with Monte-Carlo simulations. By considering carbon nanotubes as solid objects but where the overlap between their electron cloud can be controlled, we observed that the structural characteristics of networks containing lower aspect ratio CNT are highly sensitive to the degree of penetration between crossed nanotubes. Following our efficient strategy to displace CNT to different positions to create more realistic statistical models, we conclude that the connectivity between objects increases with the hard-core/soft-shell radii ratio. In contrast, the presence of curved CNT in the random networks leads to an increasing percolation threshold and to a decreasing electrical conductivity at saturation. The waviness of CNT decreases the effective distance between the nanotube extremities, hence reducing their connectivity and degrading their electrical properties. We present the results of our simulation in terms of thickness of the CNT network from which simple structural parameters such as the volume fraction or the carbon nanotube density can be accurately evaluated with our more realistic models.

  18. Radiation Dose Estimation Using Realistic Postures with PIMAL

    SciTech Connect

    Akkurt, Hatice; Wiarda, Dorothea; Eckerman, Keith F

    2010-12-01

    For correct radiation dose assessment, it is important to take the posture into account. A computational phantom with moving arms and legs was previously developed to address this need. Further, an accompanying graphical user interface (GUI), called PIMAL, was developed to enable dose estimation using realistic postures in a user-friendly manner such that the analyst's time could be substantially reduced. The importance of the posture for correct dose estimation has been demonstrated with a few case studies in earlier analyses. The previous version of PIMAL was somewhat limited in its features (i.e., it contained only a hermaphrodite phantom model and allowed only isotropic source definition). Currently GUI is being further enhanced by incorporating additional phantom models, improving the features, and increasing the user friendliness in general. This paper describes recent updates to the PIMAL software. In this summary recent updates to the PIMAL software, which aims to perform radiation transport simulations for phantom models in realistic postures in a user-friendly manner, are described. In future work additional phantom models, including hybrid phantom models, will be incorporated. In addition to further enhancements, a library of input files for the case studies that have been analyzed to date will be included in the PIMAL.

  19. Functional consequences of realistic biodiversity changes in a marine ecosystem

    PubMed Central

    Bracken, Matthew E. S.; Friberg, Sara E.; Gonzalez-Dorantes, Cirse A.; Williams, Susan L.

    2008-01-01

    Declines in biodiversity have prompted concern over the consequences of species loss for the goods and services provided by natural ecosystems. However, relatively few studies have evaluated the functional consequences of realistic, nonrandom changes in biodiversity. Instead, most designs have used randomly selected assemblages from a local species pool to construct diversity gradients. It is therefore difficult, based on current evidence, to predict the functional consequences of realistic declines in biodiversity. In this study, we used tide pool microcosms to demonstrate that the effects of real-world changes in biodiversity may be very different from those of random diversity changes. Specifically, we measured the relationship between the diversity of a seaweed assemblage and its ability to use nitrogen, a key limiting nutrient in nearshore marine systems. We quantified nitrogen uptake using both experimental and model seaweed assemblages and found that natural increases in diversity resulted in enhanced rates of nitrogen use, whereas random diversity changes had no effect on nitrogen uptake. Our results suggest that understanding the real-world consequences of declining biodiversity will require addressing changes in species performance along natural diversity gradients and understanding the relationships between species' susceptibility to loss and their contributions to ecosystem functioning. PMID:18195375

  20. Simulation of Combustion Systems with Realistic g-jitter

    NASA Technical Reports Server (NTRS)

    Mell, William E.; McGrattan, Kevin B.; Baum, Howard R.

    2003-01-01

    In this project a transient, fully three-dimensional computer simulation code was developed to simulate the effects of realistic g-jitter on a number of combustion systems. The simulation code is capable of simulating flame spread on a solid and nonpremixed or premixed gaseous combustion in nonturbulent flow with simple combustion models. Simple combustion models were used to preserve computational efficiency since this is meant to be an engineering code. Also, the use of sophisticated turbulence models was not pursued (a simple Smagorinsky type model can be implemented if deemed appropriate) because if flow velocities are large enough for turbulence to develop in a reduced gravity combustion scenario it is unlikely that g-jitter disturbances (in NASA's reduced gravity facilities) will play an important role in the flame dynamics. Acceleration disturbances of realistic orientation, magnitude, and time dependence can be easily included in the simulation. The simulation algorithm was based on techniques used in an existing large eddy simulation code which has successfully simulated fire dynamics in complex domains. A series of simulations with measured and predicted acceleration disturbances on the International Space Station (ISS) are presented. The results of this series of simulations suggested a passive isolation system and appropriate scheduling of crew activity would provide a sufficiently "quiet" acceleration environment for spherical diffusion flames.

  1. Effect of realistic vegetation variability on seasonal forecasts

    NASA Astrophysics Data System (ADS)

    Catalano, Franco; Alessandri, Andrea; De Felice, Matteo; Doblas-Reyes, Francisco J.

    2014-05-01

    A real predictability hindcast experiment with prescribed Leaf Area Index (LAI) has been performed using the state-of-the-art Earth System Model EC-Earth. LAI input to the climate model has been prescribed using a novel observational dataset based on the third generation GIMMS and MODIS satellite data. The LAI dataset has been pre-processed (monthly averaged, interpolated, gap-filled) to use it in the land surface scheme of EC-Earth (HTESSEL). The vegetation density is modeled by an exponential dependence on LAI, based on the Lambert-Beer formulation. Retrospective hindcasts have been performed with the following model setup: 7 months forecast length, 2 start dates (1st May and 1st November), 10 members, 28 years (1982-2009). Initial conditions were produced at IC3, based on ERA-40/ERA-Interim (atmosphere and land-surface) and NEMOVAR-ORAS4 (ocean and sea-ice) data. Model resolution is T159L62 for the atmosphere and the ORCA1 grid for the ocean. The effect of the realistic LAI prescribed from observation is evaluated with respect to a control experiment where LAI does not vary. Results of the retrospective hindcast experiment demonstrate that a realistic representation of vegetation has a significant effect on evaporation, temperature and precipitation. An improvement of model sensitivity to vegetation variability on the seasonal scale is also evidenced, especially during boreal winter. This may be attributed in particular to the effect of the high vegetation component on the snow cover.

  2. Towards Modeling Realistic Mobility for Performance Evaluations in MANET

    NASA Astrophysics Data System (ADS)

    Aravind, Alex; Tahir, Hassan

    Simulation modeling plays crucial role in conducting research on complex dynamic systems like mobile ad hoc networks and often the only way. Simulation has been successfully applied in MANET for more than two decades. In several recent studies, it is observed that the credibility of the simulation results in the field has decreased while the use of simulation has steadily increased. Part of this credibility crisis has been attributed to the simulation of mobility of the nodes in the system. Mobility has such a fundamental influence on the behavior and performance of mobile ad hoc networks. Accurate modeling and knowledge of mobility of the nodes in the system is not only helpful but also essential for the understanding and interpretation of the performance of the system under study. Several ideas, mostly in isolation, have been proposed in the literature to infuse realism in the mobility of nodes. In this paper, we attempt a holistic analysis of creating realistic mobility models and then demonstrate creation and analysis of realistic mobility models using a software tool we have developed. Using our software tool, desired mobility of the nodes in the system can be specified, generated, analyzed, and then the trace can be exported to be used in the performance studies of proposed algorithms or systems.

  3. DDT of hot, thermally damaged PBX 9501 in heavy confinement

    SciTech Connect

    Parker, Gary R; Dickerson, Peter M; Asay, Blaine W; Mc Afee, John M

    2010-01-01

    The research presented examines DDT of cylinders of PBX 9501 damaged above 180 C in heavy confinement for 0-3 hours and end-ignited or ramped until self-ignition (cookoff) occurred. Progression of luminous reaction was observed by streak photography through a glass-filled slit running the length of the cylinder. Post-mortem analysis of the steel DDT tubes was also done for correlation with the optical records. Results indicate that repeatable, Type I DDT was observed to occur in hot, thermally damaged PBX 9501 with low levels of porosity. It was demonstrated that multiple parameters affect DDT behavior, most likely in a coupled fashion. These parameters are porosity, ignition temperature and thermal soak duration. Conditions leading up to cookoff were shown to sensitize the HE to DDT by increasing likelihood and decreasing run length. Over the range of porosities (0-37%) and ignition temperatures (180-235 C), run lengths and detonation velocities varied, respectively, from approximately 22-109 mm and 6.0-8.3 mm {micro}s{sup -1}. This work fills a valuable and realistic space in the understanding of high explosive violent reaction, including DDT, in abnormal thermal environments.

  4. Confinement effects of polymers in porous glasses

    NASA Astrophysics Data System (ADS)

    Crupi, V.; Majolino, D.; Migliardo, P.; Venuti, V.

    1998-07-01

    Recently, confinement effects on dynamical properties of liquids inside restricted volumes have been extensively studied, either from a theoretical or technological point of view, thanks to the large possibility of industrial applications (building of optical switches, membrane separation, catalysis). We performed depolarized light scattering measurements on propylene glycol (PG) and its oligomers poly(propylene glycols) (PPG) having different molecular weights ( Mw, 425, 725 and 4000 Da), in the bulk state and confined in a silica glass having 25 Å pores. Mainly, two relevant effects are responsible for the dynamical response of liquids that diffuse and reorient in a confined geometry: (a) the 'physical traps', related to both dead-end groups and the tortuosity of the percolated channels for diffusion; and (b) the 'chemical traps', related to the degree of the absorption of molecules on the active surface sites. Hence, by comparing the behaviour of bulk polymers with confined polymers we were able to analyse the confinement influence on the molecular mobility of hydrogen-bonded liquids with different steric hindrance. The experimental results showed a frustration of molecular mobility in the confined samples owing to chemical and physical traps whose main role was highlighted thanks to the opportunity to substitute the active silanol groups (SiOH) in the inner surfaces with the non-active groups in the surfaces (treatment with methanol). In particular, we found that, in the case of low molecular weight samples, the relevant retardation process is connected to the chemical traps while for long chain polymers the physical traps play the main role. Further, the fitting procedure provided a distribution of relaxation times in the bulk systems and in short chain systems when confined in modified glass showing, in particular in the first case, that the distribution of relaxation times increases with polymers weights, occurrence related to a variety of molecular

  5. Mode engineering for realistic quantum-enhanced interferometry

    NASA Astrophysics Data System (ADS)

    Jachura, Michał; Chrapkiewicz, Radosław; Demkowicz-Dobrzański, Rafał; Wasilewski, Wojciech; Banaszek, Konrad

    2016-04-01

    Quantum metrology overcomes standard precision limits by exploiting collective quantum superpositions of physical systems used for sensing, with the prominent example of non-classical multiphoton states improving interferometric techniques. Practical quantum-enhanced interferometry is, however, vulnerable to imperfections such as partial distinguishability of interfering photons. Here we introduce a method where appropriate design of the modal structure of input photons can alleviate deleterious effects caused by another, experimentally inaccessible degree of freedom. This result is accompanied by a laboratory demonstration that a suitable choice of spatial modes combined with position-resolved coincidence detection restores entanglement-enhanced precision in the full operating range of a realistic two-photon Mach-Zehnder interferometer, specifically around a point which otherwise does not even attain the shot-noise limit due to the presence of residual distinguishing information in the spectral degree of freedom. Our method highlights the potential of engineering multimode physical systems in metrologic applications.

  6. Ring Current Modeling in a Realistic Magnetic Field Configuration

    NASA Technical Reports Server (NTRS)

    Fok, M.-C.; Moore, T. E.

    1997-01-01

    A 3-dimensional kinetic model has been developed to study the dynamics of the storm time ring current in a dipole magnetic field. In this paper, the ring current model is extended to include a realistic, time-varying magnetic field model. The magnetic field is expressed as the cross product of the gradients of two Euler potentials and the bounce-averaged particle drifts are calculated in the Euler potential coordinates. A dipolarization event is modeled by collapsing a tail-like magnetosphere to a dipole-like configuration. Our model is able to simulate the sudden enhancements in the ring current ion fluxes and the corresponding ionospheric precipitation during the substorm expansion.

  7. Mode engineering for realistic quantum-enhanced interferometry

    PubMed Central

    Jachura, Michał; Chrapkiewicz, Radosław; Demkowicz-Dobrzański, Rafał; Wasilewski, Wojciech; Banaszek, Konrad

    2016-01-01

    Quantum metrology overcomes standard precision limits by exploiting collective quantum superpositions of physical systems used for sensing, with the prominent example of non-classical multiphoton states improving interferometric techniques. Practical quantum-enhanced interferometry is, however, vulnerable to imperfections such as partial distinguishability of interfering photons. Here we introduce a method where appropriate design of the modal structure of input photons can alleviate deleterious effects caused by another, experimentally inaccessible degree of freedom. This result is accompanied by a laboratory demonstration that a suitable choice of spatial modes combined with position-resolved coincidence detection restores entanglement-enhanced precision in the full operating range of a realistic two-photon Mach–Zehnder interferometer, specifically around a point which otherwise does not even attain the shot-noise limit due to the presence of residual distinguishing information in the spectral degree of freedom. Our method highlights the potential of engineering multimode physical systems in metrologic applications. PMID:27125782

  8. Unsteady velocity measurements in a realistic intracranial aneurysm model

    NASA Astrophysics Data System (ADS)

    Ugron, Ádám; Farinas, Marie-Isabelle; Kiss, László; Paál, György

    2012-01-01

    The initiation, growth and rupture of intracranial aneurysms are intensively studied by computational fluid dynamics. To gain confidence in the results of numerical simulations, validation of the results is necessary. To this end the unsteady flow was measured in a silicone phantom of a realistic intracranial aneurysm. A flow circuit was built with a novel unsteady flow rate generating method, used to model the idealised shape of the heartbeat. This allowed the measurement of the complex three-dimensional velocity distribution by means of laser-optical methods such as laser doppler anemometry (LDA) and particle image velocimetry (PIV). The PIV measurements, available with high temporal and spatial distribution, were found to have good agreement with the control LDA measurements. Furthermore, excellent agreement was found with the numerical results.

  9. Realistic facial animation generation based on facial expression mapping

    NASA Astrophysics Data System (ADS)

    Yu, Hui; Garrod, Oliver; Jack, Rachael; Schyns, Philippe

    2014-01-01

    Facial expressions reflect internal emotional states of a character or in response to social communications. Though much effort has been taken to generate realistic facial expressions, it still remains a challenging topic due to human being's sensitivity to subtle facial movements. In this paper, we present a method for facial animation generation, which reflects true facial muscle movements with high fidelity. An intermediate model space is introduced to transfer captured static AU peak frames based on FACS to the conformed target face. And then dynamic parameters derived using a psychophysics method is integrated to generate facial animation, which is assumed to represent natural correlation of multiple AUs. Finally, the animation sequence in the intermediate model space is mapped to the target face to produce final animation.

  10. Ultra-realistic imaging and OptoClones

    NASA Astrophysics Data System (ADS)

    Bjelkhagen, Hans I.; Lembessis, Alkiviadis; Sarakinos, Andreas

    2016-03-01

    Recent improvements in solid state CW lasers, recording materials and light sources (such as LED lights) for displaying color holograms are described. Full-color analogue holograms can now be created with substantially better image characteristics than previously possible. To record ultra-realistic images depends on selecting the optimal recording laser wavelengths and employing ultra-fine-grain, silver-halide materials. The image quality is improved by using LED display light with improved spatial coherence. Recording museum artifacts using mobile holographic equipment is described. The most recent recorded such holograms (referred to as OptoClones™) are the Fabergé Eggs at the Fabergé Museum in St. Petersburg, Russia.

  11. [Long-term realistically life-threatening disease].

    PubMed

    Berent, Jarosław; Jurczyk, Agnieszka P; Markuszewski, Leszek; Szram, Stefan

    2004-01-01

    In this paper the authors discuss a legal code description of a wrongly included (as a result of a legislative error) "long-term really life-threatening disease" (dlugotrwala choroba realnie zagrazajaca zyciu) in the Criminal Code. This category of disease impossible to apply in practice since its terms "long-term" and "realistically life-threatening" are mutually exclusive--is nonetheless applicable to crimes committed from Sept. 1, 1998 to Dec. 8, 2003. In effect this causes a change in the qualification of certain acts in Art. 156 of the Criminal Code, to include those in Art. 157, Paragraph 1, and in some cases, even extending to acts named in Art. 157, Paragraph 2 of the Criminal Code. PMID:15782782

  12. Realistic electrostatic potentials in a neutron star crust

    NASA Astrophysics Data System (ADS)

    Ebel, Claudio; Mishustin, Igor; Greiner, Walter

    2015-10-01

    We study the electrostatic properties of inhomogeneous nuclear matter which can be formed in the crusts of neutron stars or in supernova explosions. Such matter is represented by Wigner-Seitz cells of different geometries (spherical, cylindrical, cartesian), which contain nuclei, free neutrons and electrons under the conditions of electrical neutrality. Using the Thomas-Fermi approximation, we have solved the Poisson equation for the electrostatic potential and calculated the corresponding electron density distributions in individual cells. The calculations are done for different shapes and sizes of the cells and different average baryon densities. The electron-to-baryon fraction was fixed at 0.3. Using realistic electron distributions leads to a significant reduction in electrostatic energy and electron chemical potential.

  13. Realistic irrigation visualization in a surgical wound debridement simulator.

    PubMed

    Shen, Yuzhong; Seevinck, Jennifer; Baydogan, Emre

    2006-01-01

    Wound debridement refers to the removal of necrotic, devitalized, or contaminated tissue and/or foreign material to promote wound healing. Surgical debridement uses sharp instruments to cut dead tissue from a wound and it is the quickest and most efficient method of debridement. A wound debridement simulator can ensure that a medical trainee is competent prior to performing a procedure on a genuine patient. Irrigation is performed at different stages of debridement in order to remove debris and reduce the bacteria count through rinsing the wound. This paper presents a novel approach for realistic irrigation visualization based on texture representations of debris. This approach applies image processing techniques to a series of images, which model the cleanliness of the wound. The active texture is generated and updated dynamically based on the irrigation state, location, and range. Presented results demonstrate that texture mapping and image processing techniques can provide effective and efficient solutions for irrigation visualization in the wound debridement simulator. PMID:16404110

  14. Design for and efficient dynamic climate model with realistic geography

    NASA Technical Reports Server (NTRS)

    Suarez, M. J.; Abeles, J.

    1984-01-01

    The long term climate sensitivity which include realistic atmospheric dynamics are severely restricted by the expense of integrating atmospheric general circulation models are discussed. Taking as an example models used at GSFC for this dynamic model is an alternative which is of much lower horizontal or vertical resolution. The model of Heid and Suarez uses only two levels in the vertical and, although it has conventional grid resolution in the meridional direction, horizontal resolution is reduced by keeping only a few degrees of freedom in the zonal wavenumber spectrum. Without zonally asymmetric forcing this model simulates a day in roughly 1/2 second on a CRAY. The model under discussion is a fully finite differenced, zonally asymmetric version of the Heid-Suarez model. It is anticipated that speeds can be obtained a few seconds a day roughly 50 times faster than moderate resolution, multilayer GCM's.

  15. The Free Will Theorem and Limits on Realistic Theories

    NASA Astrophysics Data System (ADS)

    Godfrey, Christopher

    2010-03-01

    The rGRWf model (Tumulka 2006) is a proposed solution of the measurement problem of quantum mechanics involving a stochastic nonlinear wave equation embedded in a relativistic framework. Its primary feature is a mechanism that suppresses superpositions of macroscopically different states for macroscopic systems. However, the Free Will Theorem (FWT) proposed by Conway and Kochen (Conway and Kochen 2007, 2009) purports to prove that no theory that is both non-deterministic and relativistic can reproduce all possible measurement results on a system of two entangled spin-one particles. Here we examine both the rGRWf model and the FWT. It is demonstrated that underlying assumptions in the postulates of the FWT rule out certain classes of realistic physical theories. These underlying assumptions and the characteristics of physical theories permitted by the FWT axioms are discussed.

  16. Mode engineering for realistic quantum-enhanced interferometry.

    PubMed

    Jachura, Michał; Chrapkiewicz, Radosław; Demkowicz-Dobrzański, Rafał; Wasilewski, Wojciech; Banaszek, Konrad

    2016-01-01

    Quantum metrology overcomes standard precision limits by exploiting collective quantum superpositions of physical systems used for sensing, with the prominent example of non-classical multiphoton states improving interferometric techniques. Practical quantum-enhanced interferometry is, however, vulnerable to imperfections such as partial distinguishability of interfering photons. Here we introduce a method where appropriate design of the modal structure of input photons can alleviate deleterious effects caused by another, experimentally inaccessible degree of freedom. This result is accompanied by a laboratory demonstration that a suitable choice of spatial modes combined with position-resolved coincidence detection restores entanglement-enhanced precision in the full operating range of a realistic two-photon Mach-Zehnder interferometer, specifically around a point which otherwise does not even attain the shot-noise limit due to the presence of residual distinguishing information in the spectral degree of freedom. Our method highlights the potential of engineering multimode physical systems in metrologic applications. PMID:27125782

  17. Atomistic Simulation of Polymer Crystallization at Realistic Length Scales

    SciTech Connect

    Gee, R H; Fried, L E

    2005-01-28

    Understanding the dynamics of polymer crystallization during the induction period prior to crystal growth is a key goal in polymer physics. Here we present the first study of primary crystallization of polymer melts via molecular dynamics simulations at physically realistic (about 46 nm) length scales. Our results show that the crystallization mechanism involves a spinodal decomposition microphase separation caused by an increase in the average length of rigid trans segments along the polymer backbone during the induction period. Further, the characteristic length of the growing dense domains during the induction period is longer than predicted by classical nucleation theory. These results indicate a new 'coexistence period' in the crystallization, where nucleation and growth mechanisms coexist with a phase separation mechanism. Our results provide an atomistic verification of the fringed micelle model.

  18. Tool for Generating Realistic Residential Hot Water Event Schedules: Preprint

    SciTech Connect

    Hendron, B.; Burch, J.; Barker, G.

    2010-08-01

    The installed energy savings for advanced residential hot water systems can depend greatly on detailed occupant use patterns. Quantifying these patterns is essential for analyzing measures such as tankless water heaters, solar hot water systems with demand-side heat exchangers, distribution system improvements, and recirculation loops. This paper describes the development of an advanced spreadsheet tool that can generate a series of year-long hot water event schedules consistent with realistic probability distributions of start time, duration and flow rate variability, clustering, fixture assignment, vacation periods, and seasonality. This paper also presents the application of the hot water event schedules in the context of an integral-collector-storage solar water heating system in a moderate climate.

  19. Resolving conflict realistically in today's health care environment.

    PubMed

    Smith, S B; Tutor, R S; Phillips, M L

    2001-11-01

    Conflict is a natural part of human interaction, and when properly addressed, results in improved interpersonal relationships and positive organizational culture. Unchecked conflict may escalate to verbal and physical violence. Conflict that is unresolved creates barriers for people, teams, organizational growth, and productivity, leading to cultural disintegration within the establishment. By relying on interdependence and professional collaboration, all parties involved grow and, in turn, benefit the organization and population served. When used in a constructive manner, conflict resolution can help all parties involved see the whole picture, thus allowing freedom for growth and change. Conflict resolution is accomplished best when emotions are controlled before entering into negotiation. Positive confrontation, problem solving, and negotiation are processes used to realistically resolve conflict. Everyone walks away a winner when conflict is resolved in a positive, professional manner (Stone, 1999). PMID:11725427

  20. Implementation of realistic image rendition algorithm based on DSP

    NASA Astrophysics Data System (ADS)

    Lv, Lily; Gao, Kun; Ni, Guoqiang; Zhou, Liwei; Shao, Xiaoguang

    2010-11-01

    Realistic image rendition is to reproduce the human perception of natural scenes. Retinex is a classical algorithm that simultaneously provides high dynamic range compression contrast and color constancy of an image. In this paper, we discuss a design of a digital signal processor (DSP) implementation of the single scale monochromatic Retinex algorithm. The target processor is Texas Instruments TMS320DM642, a 32-bit fix point DSP which is clocked at 600 MHz. This DSP hardware platform designed is of powerful consumption and video image processing capability. We give an overview of the DSP hardware and software, and discuss some feasible optimizations to achieve a real-time version of the Retinex algorithm. In the end, the performance of the algorithm executing on DSP platform is shown.

  1. Considerations for realistic ECCS evaluation methodology for LWRs

    SciTech Connect

    Rohatgi, U.S.; Saha, P.; Chexal, V.K.

    1985-01-01

    This paper identifies the various phenomena which govern the course of large and small break LOCAs in LWRs, and affect the key parameters such as Peak Clad Temperature (PCT) and timing of the end of blowdown, beginning of reflood, PCT, and complete quench. A review of the best-estimate models and correlations for these phenomena in the current literature has been presented. Finally, a set of models have been recommended which may be incorporated in a present best-estimate code such as TRAC or RELAP5 in order to develop a realistic ECCS evaluation methodology for future LWRs and have also been compared with the requirements of current ECCS evaluation methodology as outlined in Appendix K of 10CFR50. 58 refs.

  2. Climate Sensitivity to Realistic Solar Heating of Snow and Ice

    NASA Astrophysics Data System (ADS)

    Flanner, M.; Zender, C. S.

    2004-12-01

    Snow and ice-covered surfaces are highly reflective and play an integral role in the planetary radiation budget. However, GCMs typically prescribe snow reflection and absorption based on minimal knowledge of snow physical characteristics. We performed climate sensitivity simulations with the NCAR CCSM including a new physically-based multi-layer snow radiative transfer model. The model predicts the effects of vertically resolved heating, absorbing aerosol, and snowpack transparency on snowpack evolution and climate. These processes significantly reduce the model's near-infrared albedo bias over deep snowpacks. While the current CCSM implementation prescribes all solar radiative absorption to occur in the top 2 cm of snow, we estimate that about 65% occurs beneath this level. Accounting for the vertical distribution of snowpack heating and more realistic reflectance significantly alters snowpack depth, surface albedo, and surface air temperature over Northern Hemisphere regions. Implications for the strength of the ice-albedo feedback will be discussed.

  3. Bosonic structure of realistic SO(10) supersymmetric cosmic strings

    NASA Astrophysics Data System (ADS)

    Allys, Erwan

    2016-05-01

    We study the bosonic structure of F -term Nambu-Goto cosmic strings forming in a realistic SO(10) implementation, assuming standard hybrid inflation. We describe the supersymmetric grand unified theory, and its spontaneous symmetry breaking scheme in parallel with the inflationary process. We also write the explicit tensor formulation of its scalar sector, focusing on the subrepresentations singlet under the standard model, which is sufficient to describe the string structure. We then introduce an ansatz for Abelian cosmic strings, discussing in details the hypothesis, and write down the field equations and boundary conditions. Finally, after doing a perturbative study of the model, we present and discuss the results obtained with numerical solutions of the string structure.

  4. Optimal continuous variable quantum teleportation protocol for realistic settings

    NASA Astrophysics Data System (ADS)

    Luiz, F. S.; Rigolin, Gustavo

    2015-03-01

    We show the optimal setup that allows Alice to teleport coherent states | α > to Bob giving the greatest fidelity (efficiency) when one takes into account two realistic assumptions. The first one is the fact that in any actual implementation of the continuous variable teleportation protocol (CVTP) Alice and Bob necessarily share non-maximally entangled states (two-mode finitely squeezed states). The second one assumes that Alice's pool of possible coherent states to be teleported to Bob does not cover the whole complex plane (| α | < ∞). The optimal strategy is achieved by tuning three parameters in the original CVTP, namely, Alice's beam splitter transmittance and Bob's displacements in position and momentum implemented on the teleported state. These slight changes in the protocol are currently easy to be implemented and, as we show, give considerable gain in performance for a variety of possible pool of input states with Alice.

  5. High-definition displays for realistic simulator and trainer systems

    NASA Astrophysics Data System (ADS)

    Daniels, Reginald; Hopper, Darrel G.; Beyer, Steve; Peppler, Philipp W.

    1998-09-01

    Current flight simulators and trainers do not provide acceptable levels of visual display performance (performance that would allow ground based trainers to economically replace aircraft flying training) for many air-to-air and air-to- ground training scenarios. Ground training for pilots could be made significantly more realistic, allowing the ground-based curricula to be enlarged. The enhanced ground based training could then more readily augment actual aircraft flying (training) time. This paper presents the technology need and opportunity to create a new class of immersive simulator- trainer systems having some 210 million pixels characterized especially by a 20-20 visual acuity synthetic vision system having some 150 million pixels. The same new display technology base is needed for planned crew stations for uninhabited combat air vehicles (UCAV), advanced aircraft cockpits and mission crewstations, and for the space plane.

  6. Fighting noise with noise in realistic quantum teleportation

    NASA Astrophysics Data System (ADS)

    Fortes, Raphael; Rigolin, Gustavo

    2015-07-01

    We investigate how the efficiency of the quantum teleportation protocol is affected when the qubits involved in the protocol are subjected to noise or decoherence. We study all types of noise usually encountered in real-world implementations of quantum communication protocols, namely, the bit-flip, phase-flip (phase damping), depolarizing, and amplitude-damping noise. Several realistic scenarios are studied in which a part or all of the qubits employed in the execution of the quantum teleportation protocol are subjected to the same or different types of noise. We find noise scenarios not yet known in which more noise or less entanglement lead to more efficiency. Furthermore, we show that if noise is unavoidable it is better to subject the qubits to different noise channels in order to obtain an increase in the efficiency of the protocol.

  7. Realistic Mobility Modeling for Vehicular Ad Hoc Networks

    NASA Astrophysics Data System (ADS)

    Akay, Hilal; Tugcu, Tuna

    2009-08-01

    Simulations used for evaluating the performance of routing protocols for Vehicular Ad Hoc Networks (VANET) are mostly based on random mobility and fail to consider individual behaviors of the vehicles. Unrealistic assumptions about mobility produce misleading results about the behavior of routing protocols in real deployments. In this paper, a realistic mobility modeling tool, Mobility for Vehicles (MOVE), which considers the basic mobility behaviors of vehicles, is proposed for a more accurate evaluation. The proposed model is tested against the Random Waypoint (RWP) model using AODV and OLSR protocols. The results show that the mobility model significantly affects the number of nodes within the transmission range of a node, the volume of control traffic, and the number of collisions. It is shown that number of intersections, grid size, and node density are important parameters when dealing with VANET performance.

  8. Generating realistic environments for cyber operations development, testing, and training

    NASA Astrophysics Data System (ADS)

    Berk, Vincent H.; Gregorio-de Souza, Ian; Murphy, John P.

    2012-06-01

    Training eective cyber operatives requires realistic network environments that incorporate the structural and social complexities representative of the real world. Network trac generators facilitate repeatable experiments for the development, training and testing of cyber operations. However, current network trac generators, ranging from simple load testers to complex frameworks, fail to capture the realism inherent in actual environments. In order to improve the realism of network trac generated by these systems, it is necessary to quantitatively measure the level of realism in generated trac with respect to the environment being mimicked. We categorize realism measures into statistical, content, and behavioral measurements, and propose various metrics that can be applied at each level to indicate how eectively the generated trac mimics the real world.

  9. Application of the Probabilistic Dynamic Synthesis Method to Realistic Structures

    NASA Technical Reports Server (NTRS)

    Brown, Andrew M.; Ferri, Aldo A.

    1998-01-01

    The Probabilistic Dynamic Synthesis method is a technique for obtaining the statistics of a desired response engineering quantity for a structure with non-deterministic parameters. The method uses measured data from modal testing of the structure as the input random variables, rather than more "primitive" quantities like geometry or material variation. This modal information is much more comprehensive and easily measured than the "primitive" information. The probabilistic analysis is carried out using either response surface reliability methods or Monte Carlo simulation. In previous work, the feasibility of the PDS method applied to a simple seven degree-of-freedom spring-mass system was verified. In this paper, extensive issues involved with applying the method to a realistic three-substructure system are examined, and free and forced response analyses are performed. The results from using the method are promising, especially when the lack of alternatives for obtaining quantitative output for probabilistic structures is considered.

  10. Computed rotational rainbows from realistic potential energy surfaces

    SciTech Connect

    Gianturco, F.A.; Palma, A.

    1985-08-01

    The quantal IOS approximation in here employed to study interference structures in the rotationally inelastic, state-to-state differential cross sections for polar diatomic targets (LiH, FH, and CO) interacting with He atoms. Quite realistic expressions are used to describe the relevant potential energy surfaces (PES) which were taken from previous works that tested them against accurate experimental findings for total and partial differential cross sections. Specific features like short-range anisotropy and well depth, long-range attractive regions and overall range of action for each potential employed are analyzed and discussed in relation to their influence on rotational rainbows appearance and on the possible observation of cross section extrema in rotational energy distributions.

  11. Computer simulations of realistic three-dimensional microstructures

    NASA Astrophysics Data System (ADS)

    Mao, Yuxiong

    A novel and efficient methodology is developed for computer simulations of realistic two-dimensional (2D) and three-dimensional (3D) microstructures. The simulations incorporate realistic 2D and 3D complex morphologies/shapes, spatial patterns, anisotropy, volume fractions, and size distributions of the microstructural features statistically similar to those in the corresponding real microstructures. The methodology permits simulations of sufficiently large 2D as well as 3D microstructural windows that incorporate short-range (on the order of particle/feature size) as well as long-range (hundred times the particle/feature size) microstructural heterogeneities and spatial patterns at high resolution. The utility of the technique has been successfully demonstrated through its application to the 2D microstructures of the constituent particles in wrought Al-alloys, the 3D microstructure of discontinuously reinforced Al-alloy (DRA) composites containing SiC particles that have complex 3D shapes/morphologies and spatial clustering, and 3D microstructure of boron modified Ti-6Al-4V composites containing fine TiB whiskers and coarse primary TiB particles. The simulation parameters are correlated with the materials processing parameters (such as composition, particle size ratio, extrusion ratio, extrusion temperature, etc.), which enables the simulations of rational virtual 3D microstructures for the parametric studies on microstructure-properties relationships. The simulated microstructures have been implemented in the 3D finite-elements (FE)-based framework for simulations of micro-mechanical response and stress-strain curves. Finally, a new unbiased and assumption free dual-scale virtual cycloids probe for estimating surface area of 3D objects constructed by 2D serial section images is also presented.

  12. An anatomically realistic brain phantom for quantification with positron tomography

    SciTech Connect

    Wong, D.F.; Links, J.M.; Molliver, M.E.; Hengst, T.C.; Clifford, C.M.; Buhle, L.; Bryan, M.; Stumpf, M.; Wagner, H.N. Jr.

    1984-01-01

    Phantom studies are useful in assessing and maximizing the accuracy and precision of quantification of absolute activity, assessing errors associated with patient positioning, and dosimetry. Most phantoms are limited by the use of simple shapes, which do not adequately reflect real anatomy. The authors have constructed an anatomically realistic life-size brain phantom for positron tomography studies. The phantom consists of separately fillable R + L caudates, R + L putamens, R + L globus passidus and cerebellum. These structures are contained in proper anatomic orientation within a fillable cerebrum. Solid ventricles are also present. The entire clear vinyl cerebrum is placed in a human skull. The internal brain structures were fabricated from polyester resin, with dimensions, shapes and sizes of the structures obtained from digitized contours of brain slices in the U.C.S.D. computerized brain atlas. The structures were filled with known concentrations of Ga-68 in water and scanned with our NeuroECAT. The phantom was aligned in the scanner for each structure, such that the tomographic slice passed through that structure's center. After calibration of the scanner with a standard phantom for counts/pixel uCi/cc conversion, the measured activity concentrations were compared with the actual concentrations. The ratio of measured to actual activity concentration (''recovery coefficient'') for the caudate was 0.33; for the putamen 0.42. For comparison, the ratio for spheres of diameters 9.5, 16,19 and 25.4 mm was 0.23, 0.54, 0.81, and 0.93. This phantom provides more realistic assessment of performance and allows calculation of correction factors.

  13. Modeling and Analysis of Realistic Fire Scenarios in Spacecraft

    NASA Technical Reports Server (NTRS)

    Brooker, J. E.; Dietrich, D. L.; Gokoglu, S. A.; Urban, D. L.; Ruff, G. A.

    2015-01-01

    An accidental fire inside a spacecraft is an unlikely, but very real emergency situation that can easily have dire consequences. While much has been learned over the past 25+ years of dedicated research on flame behavior in microgravity, a quantitative understanding of the initiation, spread, detection and extinguishment of a realistic fire aboard a spacecraft is lacking. Virtually all combustion experiments in microgravity have been small-scale, by necessity (hardware limitations in ground-based facilities and safety concerns in space-based facilities). Large-scale, realistic fire experiments are unlikely for the foreseeable future (unlike in terrestrial situations). Therefore, NASA will have to rely on scale modeling, extrapolation of small-scale experiments and detailed numerical modeling to provide the data necessary for vehicle and safety system design. This paper presents the results of parallel efforts to better model the initiation, spread, detection and extinguishment of fires aboard spacecraft. The first is a detailed numerical model using the freely available Fire Dynamics Simulator (FDS). FDS is a CFD code that numerically solves a large eddy simulation form of the Navier-Stokes equations. FDS provides a detailed treatment of the smoke and energy transport from a fire. The simulations provide a wealth of information, but are computationally intensive and not suitable for parametric studies where the detailed treatment of the mass and energy transport are unnecessary. The second path extends a model previously documented at ICES meetings that attempted to predict maximum survivable fires aboard space-craft. This one-dimensional model implies the heat and mass transfer as well as toxic species production from a fire. These simplifications result in a code that is faster and more suitable for parametric studies (having already been used to help in the hatch design of the Multi-Purpose Crew Vehicle, MPCV).

  14. Performance of Airborne Precision Spacing Under Realistic Wind Conditions

    NASA Technical Reports Server (NTRS)

    Wieland, Frederick; Santos, Michel; Krueger, William; Houston, Vincent E.

    2011-01-01

    With the expected worldwide increase of air traffic during the coming decade, both the Federal Aviation Administration s (FAA s) Next Generation Air Transportation System (NextGen), as well as Eurocontrol s Single European Sky ATM Research (SESAR) program have, as part of their plans, air traffic management solutions that can increase performance without requiring time-consuming and expensive infrastructure changes. One such solution involves the ability of both controllers and flight crews to deliver aircraft to the runway with greater accuracy than is possible today. Previous research has shown that time-based spacing techniques, wherein the controller assigns a time spacing to each pair of arriving aircraft, is one way to achieve this goal by providing greater runway delivery accuracy that produces a concomitant increase in system-wide performance. The research described herein focuses on a specific application of time-based spacing, called Airborne Precision Spacing (APS), which has evolved over the past ten years. This research furthers APS understanding by studying its performance with realistic wind conditions obtained from atmospheric sounding data and with realistic wind forecasts obtained from the Rapid Update Cycle (RUC) short-range weather forecast. In addition, this study investigates APS performance with limited surveillance range, as provided by the Automatic Dependent Surveillance-Broadcast (ADS-B) system, and with an algorithm designed to improve APS performance when an ADS-B signal is unavailable. The results presented herein quantify the runway threshold delivery accuracy of APS un-der these conditions, and also quantify resulting workload metrics such as the number of speed changes required to maintain spacing.

  15. Towards a realistic population of simulated galaxy groups and clusters

    NASA Astrophysics Data System (ADS)

    Le Brun, Amandine M. C.; McCarthy, Ian G.; Schaye, Joop; Ponman, Trevor J.

    2014-06-01

    We present a new suite of large-volume cosmological hydrodynamical simulations called cosmo-OWLS. They form an extension to the OverWhelmingly Large Simulations (OWLS) project, and have been designed to help improve our understanding of cluster astrophysics and non-linear structure formation, which are now the limiting systematic errors when using clusters as cosmological probes. Starting from identical initial conditions in either the Planck or WMAP7 cosmologies, we systematically vary the most important `sub-grid' physics, including feedback from supernovae and active galactic nuclei (AGN). We compare the properties of the simulated galaxy groups and clusters to a wide range of observational data, such as X-ray luminosity and temperature, gas mass fractions, entropy and density profiles, Sunyaev-Zel'dovich flux, I-band mass-to-light ratio, dominance of the brightest cluster galaxy and central massive black hole (BH) masses, by producing synthetic observations and mimicking observational analysis techniques. These comparisons demonstrate that some AGN feedback models can produce a realistic population of galaxy groups and clusters, broadly reproducing both the median trend and, for the first time, the scatter in physical properties over approximately two decades in mass (1013 M⊙ ≲ M500 ≲ 1015 M⊙) and 1.5 decades in radius (0.05 ≲ r/r500 ≲ 1.5). However, in other models, the AGN feedback is too violent (even though they reproduce the observed BH scaling relations), implying that calibration of the models is required. The production of realistic populations of simulated groups and clusters, as well as models that bracket the observations, opens the door to the creation of synthetic surveys for assisting the astrophysical and cosmological interpretation of cluster surveys, as well as quantifying the impact of selection effects.

  16. Packing frustration in dense confined fluids

    NASA Astrophysics Data System (ADS)

    Nygârd, Kim; Sarman, Sten; Kjellander, Roland

    2014-09-01

    Packing frustration for confined fluids, i.e., the incompatibility between the preferred packing of the fluid particles and the packing constraints imposed by the confining surfaces, is studied for a dense hard-sphere fluid confined between planar hard surfaces at short separations. The detailed mechanism for the frustration is investigated via an analysis of the anisotropic pair distributions of the confined fluid, as obtained from integral equation theory for inhomogeneous fluids at pair correlation level within the anisotropic Percus-Yevick approximation. By examining the mean forces that arise from interparticle collisions around the periphery of each particle in the slit, we calculate the principal components of the mean force for the density profile - each component being the sum of collisional forces on a particle's hemisphere facing either surface. The variations of these components with the slit width give rise to rather intricate changes in the layer structure between the surfaces, but, as shown in this paper, the basis of these variations can be easily understood qualitatively and often also semi-quantitatively. It is found that the ordering of the fluid is in essence governed locally by the packing constraints at each single solid-fluid interface. A simple superposition of forces due to the presence of each surface gives surprisingly good estimates of the density profiles, but there remain nontrivial confinement effects that cannot be explained by superposition, most notably the magnitude of the excess adsorption of particles in the slit relative to bulk.

  17. Circularly confined microswimmers exhibit multiple global patterns.

    PubMed

    Tsang, Alan Cheng Hou; Kanso, Eva

    2015-04-01

    Geometric confinement plays an important role in the dynamics of natural and synthetic microswimmers from bacterial cells to self-propelled particles in high-throughput microfluidic devices. However, little is known about the effects of geometric confinement on the emergent global patterns in such self-propelled systems. Recent experiments on bacterial cells report that, depending on the cell concentration, cells either spontaneously organize into vortical motion in thin cylindrical and spherical droplets or aggregate at the inner boundary of the droplets. Our goal in this paper is to investigate, in the context of an idealized physical model, the interplay between geometric confinement and level of flagellar activity on the emergent collective patterns. We show that decreasing flagellar activity induces a hydrodynamically triggered transition in confined microswimmers from swirling to global circulation (vortex) to boundary aggregation and clustering. These results highlight that the complex interplay between confinement, flagellar activity, and hydrodynamic flows in concentrated suspensions of microswimmers could lead to a plethora of global patterns that are difficult to predict from geometric consideration alone. PMID:25974581

  18. Static current profile control and RFP confinement

    NASA Astrophysics Data System (ADS)

    Scheffel, Jan; Schnack, Dalton D.; Mirza, Ahmed A.

    2013-11-01

    Static current profile control (CPC) is shown numerically to substantially enhance plasma confinement in the reversed-field pinch (RFP). By suitable application of an auxiliary electric field and adjustment of its internal location, width and amplitude, strongly decreased levels of dynamo fluctuations are obtained. The simulations are performed using a fully non-linear, resistive magnetohydrodynamic model, including the effects of ohmic heating as well as parallel and perpendicular heat conduction along stochastic field lines. The importance of controlling the parallel current profile in the core plasma to minimize the effects of tearing modes on confinement is thus confirmed. A near three-fold increase in energy confinement is found and poloidal plasma beta increases by 30% from 0.20 to 0.27. The edge heat flux is reduced to a third of that of the conventional RFP. The high-confinement phase is interrupted here by a crash, characterized by a rapid decrease in confinement. A detailed study of the crash phase is carried out by the standard Δ‧ theory and a fully resistive linearized time-spectral method; the generalized weighted residual method. The analysis suggests that the instability is caused by pressure-driven, resistive g-modes. Inclusion of anisotropic thermal conduction reduces the linear growth rates. As compared with our earlier numerical studies of CPC in the RFP, employing feedback control, the present static control scheme should be more easily implemented experimentally.

  19. Circularly confined microswimmers exhibit multiple global patterns

    NASA Astrophysics Data System (ADS)

    Tsang, Alan Cheng Hou; Kanso, Eva

    2015-04-01

    Geometric confinement plays an important role in the dynamics of natural and synthetic microswimmers from bacterial cells to self-propelled particles in high-throughput microfluidic devices. However, little is known about the effects of geometric confinement on the emergent global patterns in such self-propelled systems. Recent experiments on bacterial cells report that, depending on the cell concentration, cells either spontaneously organize into vortical motion in thin cylindrical and spherical droplets or aggregate at the inner boundary of the droplets. Our goal in this paper is to investigate, in the context of an idealized physical model, the interplay between geometric confinement and level of flagellar activity on the emergent collective patterns. We show that decreasing flagellar activity induces a hydrodynamically triggered transition in confined microswimmers from swirling to global circulation (vortex) to boundary aggregation and clustering. These results highlight that the complex interplay between confinement, flagellar activity, and hydrodynamic flows in concentrated suspensions of microswimmers could lead to a plethora of global patterns that are difficult to predict from geometric consideration alone.

  20. Effects of confinement on nanoparticle flows

    NASA Astrophysics Data System (ADS)

    Conrad, Jacinta

    The transport properties of nanoparticles that are dispersed in complex fluids and flowed through narrow confining geometries affect a wide range of materials shaping and forming processes, including three-dimensional printing and nanocomposite processing. Here, I will describe two sets of experiments in which we use optical microscopy to probe the structure and transport properties of suspensions of particles that are confined geometrically. First, we investigate the structure and flow properties of dense suspensions of submicron particles, in which the particles interact via an entropic depletion attraction, that are confined in thin films and microchannels. Second, we characterize the transport properties of nanoparticles, dispersed at low concentration in water or in aqueous solutions of high-molecular weight polymers, that are confined in regular arrays of nanoposts or in disordered porous media. I will discuss our results and their practical implications for materials processing as well as for other applications that require confined transport of nanomaterials through complex media. Welch Foundation (E-1869) and NSF (CBET-1438204).

  1. Measuring DNA Confinement and Excluded Volume Parameters: Scaling with confinement and ionic strength

    NASA Astrophysics Data System (ADS)

    Klotz, Alexander; Duong, Lyndon; Coursol, Laurence; Reisner, Walter

    2014-03-01

    Using nanofluidic devices for genomic mapping requires an understanding of the underlying polymer physics of confined DNA. Despite many years of study, there are still aspects that are poorly understood, including the role that excluded volume and semiflexibility play under confinement. Here, a hybrid nanofluidic device consisting of a narrow slit embedded with a lattice of square pits was used to study confined DNA. At equilibrium, molecules tend to occupy one or more pits. The partitioning of molecular contour between the pits and the slit is dependent on maximizing entropy by removing contour from the highly confining slit while reducing excess free energy due to excluded volume interactions from increased concentration in the pit. Measurements of the average number of occupied pits as a function of pit dimension, slit height, and ionic strength serves as a probe of the underlying polymer physics. In particular, the free energy of slit-like confinement and the effective molecular width were measured across a range of slit heights and ionic strengths. It was found that effective width scales with ionic strength according to Stigter's charged rod theory, and that the Chen-Sullivan interpolation formula for the slit-like energy of confinement describes the data well for narrow slits. Unexpected scaling of the confinement free energy with ionic strength indicates that excluded volume effects are relevant for confined DNA.

  2. Stiffness and Confinement Ratios of SMA Wire Jackets for Confining Concrete

    NASA Astrophysics Data System (ADS)

    Choi, Eunsoo; Kim, Dong Joo; Youn, Heejung

    2014-07-01

    This article discusses the effects of the stiffness and confinement ratios of shape memory alloy (SMA) wire jackets on the behavior of confined concrete. SMA wire jackets are an effective confining material to improve concrete behavior; for example, by increasing peak strength and failure strain. The stiffness and confinement ratios of fiber-reinforced polymer jackets have been extensively discussed and their effects are well known. However, assessment of the stiffness and confinement ratios of SMA wire jackets has not previously been conducted. In this study, we investigate the effects of the stiffness and confinement ratios of steel jackets, and then compare the results with those of SMA wire jackets. In general, the stiffness ratios of SMA wire jackets are relatively smaller than those of steel jackets, and most of them have lower stiffness ratios because the Young's moduli of the SMAs are relatively small. The active confining pressure of the SMA wires does not improve the lower stiffness-ratio effect since the amount of active confining pressure is not sufficiently large.

  3. Influence of realistic atom wall potentials in quantum reflection traps

    NASA Astrophysics Data System (ADS)

    Madroñero, Javier; Friedrich, Harald

    2007-02-01

    We study the influence of atom-surface interactions close to the surface on the confinement properties in a recently proposed model [A. Jurisch and H. Friedrich, Phys. Lett. A 349, 230 (2006)] for quantum reflection traps and test the reliability of the sharp-step approximation used there. Accurate numerical calculations show a dependence of the surviving particle fraction on characteristic potential lengths determined by the behavior of the interaction in the limits r→0 and r→∞ of the atom-surface distance r . For interactions dominated by the retarded potential proportional to 1/r4 we find that the simplified sharp-step potential reproduces the behavior of the trapped atoms well, both qualitatively and quantitatively.

  4. Energy Confinement of both Ohmic and LHW Plasma on EAST

    NASA Astrophysics Data System (ADS)

    Yang, Yao; Gao, Xiang; EAST Team

    2011-06-01

    Study on the characters of energy confinement in both Ohmic and lower hybrid wave (LHW) discharges on EAST is conducted and the linear Ohmic confinement (LOC), saturated ohmic confinement (SOC) and improved Ohmic confinement (IOC) regimes are investigated in this paper. It is observed that an improved confinement mode characterized by both a drop of Dα line intensity and an increase in line average density can be triggered by a gas puffing pulse.

  5. Progress in toroidal confinement and fusion research

    SciTech Connect

    Furth, H.P.

    1987-10-01

    During the past 30 years, the characteristic T/sub i/n tau/sub E/-value of toroidal-confinement experiments has advanced by more than seven orders of magnitude. Part of this advance has been due to an increase of gross machine parameters. Most of this advance has been due to an increase of gross machine parameters. Most of the advance is associated with improvements in the ''quality of plasma confinement.'' The combined evidence of spherator and tokamak research clarifies the role of magnetic-field geometry in determining confinement and points to the importance of shielding out plasma edge effects. A true physical understanding of anomalous transport remains to be achieved. 39 refs., 11 figs., 1 tab.

  6. Properties of Water Confined in Ionic Liquids

    PubMed Central

    Saihara, Koji; Yoshimura, Yukihiro; Ohta, Soichi; Shimizu, Akio

    2015-01-01

    The varying states of water confined in the nano-domain structures of typical room temperature ionic liquids (ILs) were investigated by 1H NMR and by measurements of self-diffusion coefficients while systematically varying the IL cations and anions. The NMR peaks for water in BF4-based ILs were clearly split, indicating the presence of two discrete states of confined water (H2O and HOD). Proton and/or deuterium exchange rate among the water molecules was very slowly in the water-pocket. Notably, no significant changes were observed in the chemical shifts of the ILs. Self-diffusion coefficient results showed that water molecules exhibit a similar degree of mobility, although their diffusion rate is one order of magnitude faster than that of the IL cations and anions. These findings provide information on a completely new type of confinement, that of liquid water in soft matter. PMID:26024339

  7. Transition metal catalysis in confined spaces.

    PubMed

    Leenders, Stefan H A M; Gramage-Doria, Rafael; de Bruin, Bas; Reek, Joost N H

    2015-01-21

    Transition metal catalysis plays an important role in both industry and in academia where selectivity, activity and stability are crucial parameters to control. Next to changing the structure of the ligand, introducing a confined space as a second coordination sphere around a metal catalyst has recently been shown to be a viable method to induce new selectivity and activity in transition metal catalysis. In this review we focus on supramolecular strategies to encapsulate transition metal complexes with the aim of controlling the selectivity via the second coordination sphere. As we will discuss, catalyst confinement can result in selective processes that are impossible or difficult to achieve by traditional methods. We will describe the template-ligand approach as well as the host-guest approach to arrive at such supramolecular systems and discuss how the performance of the catalyst is enhanced by confining it in a molecular container. PMID:25340992

  8. Neutron Assay System for Confinement Vessel Disposition

    SciTech Connect

    Frame, Katherine C.; Bourne, Mark M.; Crooks, William J.; Evans, Louise; Mayo, Douglas R.; Miko, David K.; Salazar, William R.; Stange, Sy; Valdez, Jose I.; Vigil, Georgiana M.

    2012-07-13

    Los Alamos National Laboratory has a number of spherical confinement vessels (CVs) remaining from tests involving nuclear materials. These vessels have an inner diameter of 6 feet with 1-inch thick steel walls. The goal of the Confinement Vessel Disposition (CVD) project is to remove debris and reduce contamination inside the CVs. The Confinement Vessel Assay System (CVAS) was developed to measure the amount of special nuclear material (SNM) in CVs before and after cleanout. Prior to cleanout, the system will be used to perform a verification measurement of each vessel. After cleanout, the system will be used to perform safeguards-quality assays of {le}100-g {sup 239}Pu equivalent in a vessel for safeguards termination. The CVAS has been tested and calibrated in preparation for verification and safeguards measurements.

  9. INERT Atmosphere confinement operability test procedure

    SciTech Connect

    RISENMAY, H.R.

    1999-02-22

    This Operability Test Procedure (OTP) provides instructions for testing operability of the Inert Atmosphere Confinement (IAC). The Inert Atmosphere Confinement was designed and built for opening cans of metal items that might have hydrided surfaces. Unreviewed Safety Question (USQ) PFP-97-005 addresses the discovery of suspected plutonium hydride forming on plutonium metal currently stored in the Plutonium Finishing Plant vaults. Plutonium hydride reacts quickly with air, liberating energy. The Inert Atmosphere Confinement was designed to prevent this sudden liberation of energy by opening the material in an inert argon atmosphere instead of the normal glovebox atmosphere. The IAC is located in glovebox HC-21A, room 230B of the 234-5Z Building at the Plutonium Finishing Plant (PFP) in the 200-West Area of the Hanford Site.

  10. Realist complex intervention science: Applying realist principles across all phases of the Medical Research Council framework for developing and evaluating complex interventions

    PubMed Central

    Fletcher, Adam; Jamal, Farah; Moore, Graham; Evans, Rhiannon E.; Murphy, Simon; Bonell, Chris

    2016-01-01

    The integration of realist evaluation principles within randomised controlled trials (‘realist RCTs’) enables evaluations of complex interventions to answer questions about what works, for whom and under what circumstances. This allows evaluators to better develop and refine mid-level programme theories. However, this is only one phase in the process of developing and evaluating complex interventions. We describe and exemplify how social scientists can integrate realist principles across all phases of the Medical Research Council framework. Intervention development, modelling, and feasibility and pilot studies need to theorise the contextual conditions necessary for intervention mechanisms to be activated. Where interventions are scaled up and translated into routine practice, realist principles also have much to offer in facilitating knowledge about longer-term sustainability, benefits and harms. Integrating a realist approach across all phases of complex intervention science is vital for considering the feasibility and likely effects of interventions for different localities and population subgroups. PMID:27478401

  11. Electronic quantum confinement in cylindrical potential well

    NASA Astrophysics Data System (ADS)

    Baltenkov, Arkadiy S.; Msezane, Alfred Z.

    2016-04-01

    The effects of quantum confinement on the momentum distribution of electrons confined within a cylindrical potential well have been analyzed. The motivation is to understand specific features of the momentum distribution of electrons when the electron behavior is completely controlled by the parameters of a non-isotropic potential cavity. It is shown that studying the solutions of the wave equation for an electron confined in a cylindrical potential well offers the possibility to analyze the confinement behavior of an electron executing one- or two-dimensional motion in the three-dimensional space within the framework of the same mathematical model. Some low-lying electronic states with different symmetries have been considered and the corresponding wave functions have been calculated; the behavior of their nodes and their peak positions with respect to the parameters of the cylindrical well has been analyzed. Additionally, the momentum distributions of electrons in these states have been calculated. The limiting cases of the ratio of the cylinder length H and its radius R0 have been considered; when the cylinder length H significantly exceeds its radius R0 and when the cylinder radius is much greater than its length. The cylindrical quantum confinement effects on the momentum distribution of electrons in these potential wells have been analyzed. The possible application of the results obtained here for the description of the general features in the behavior of electrons in nanowires with metallic type of conductivity (or nanotubes) and ultrathin epitaxial films (or graphene sheets) are discussed. Possible experiments are suggested where the quantum confinement can be manifested. Contribution to the Topical Issue "Atomic Cluster Collisions (7th International Symposium)", edited by Gerardo Delgado Barrio, Andrey Solov'Yov, Pablo Villarreal, Rita Prosmiti.

  12. Experimental Achievements on Plasma Confinement and Turbulence

    SciTech Connect

    Fujisawa, A.

    2009-02-19

    This article presents a brief review of the experimental studies on turbulence and resultant transport in toroidal plasmas. The article focuses on two topics, physics of transport barrier and the role of mesoscale structure on plasma confinement, i.e. zonal flows. The two topics show the important roles of the mutual interactions between sheared flows, zonal flows and drift waves for plasma turbulence and transport. The findings can lead us to further generalized concept of the disparate scale interactions which could give a fundamental understanding of the plasma confinement from the first principle.

  13. Coordinated Water Under Confinement Eases Sliding Friction

    NASA Astrophysics Data System (ADS)

    Defante, Adrian; Dhopotkar, Nishad; Dhinojwala, Ali

    Water is essential to a number of interfacial phenomena such as the lubrication of knee joints, protein folding, mass transport, and adsorption processes. We have used a biaxial friction cell to quantify underwater friction between a hydrophobic elastomeric lens and a hydrophobic self-assembled monolayer in the presence of surfactant solutions. To gain an understanding of the role of water in these processes we have coupled this measurement with surface sensitive sum frequency generation to directly probe the molecular constitution of the confined contact interface. We observe that role of confined coordinated water between two hydrophobic substrates covered with surfactants is the key to obtaining a low coefficient of friction.

  14. On the Dirac Structure of Confinement

    SciTech Connect

    Adam P. Szczepaniak; Eric S. Swanson

    1997-04-01

    The Dirac structure of confinement is shown to be of time like-vector nature in the heavy quark limit of QCD. This stands in contradiction with the phenomenological success of the Dirac scalar confining potential. A resolution is achieved through the demonstration that an effective scalar interaction is dynamically generated by nonperturbative mixing between ordinary and hybrid Q {bar Q} states. The resolution depends crucially on the collective nature of the gluonic degrees of freedom. This implies that dynamical gluonic effects are vital when attempting to incorporate fine structure in models of the Q {bar Q} interaction.

  15. Neutral Beam Ion Confinement in NSTX

    SciTech Connect

    D.S. Darrow; E.D. Fredrickson; S.M. Kaye; S.S. Medley; and A.L. Roquemore

    2001-07-24

    Neutral-beam (NB) heating in the National Spherical Torus Experiment (NSTX) began in September 2000 using up to 5 MW of 80 keV deuterium (D) beams. An initial assessment of beam ion confinement has been made using neutron detectors, a neutral particle analyzer (NPA), and a Faraday cup beam ion loss probe. Preliminary neutron results indicate that confinement may be roughly classical in quiescent discharges, but the probe measurements do not match a classical loss model. MHD activity, especially reconnection events (REs) causes substantial disturbance of the beam ion population.

  16. Spontaneous Circulation of Confined Active Suspensions

    NASA Astrophysics Data System (ADS)

    Woodhouse, Francis; Goldstein, Raymond

    2012-11-01

    Many active fluid systems encountered in biology are set in total geometric confinement; cytoplasmic streaming is a prominent and ubiquitous example. Using the simple paradigm of a dilute dipolar swimmer suspension, we demonstrate that the two key constraints of circular confinement and fluid incompressibility yield qualitatively new dynamics, effectively quantizing the behaviour regimes. We show analytically that there is an activity threshold for spontaneous auto-circulation and verify this numerically. Long-time non-linear behaviour is investigated via simulations, which reveal steady states displaying nematic defect separation and a high-activity bifurcation to an oscillatory regime.

  17. Anomalous thermal confinement in ohmically heated tokamaks

    SciTech Connect

    Romanelli, F.; Tang, W.M.; White, R.B.

    1986-02-01

    A model is proposed to explain the behavior of the gross energy confinement time in ohmically heated tokamak plasmas. The analysis takes into account the effect of the anomalous thermal conductivity due to small scale turbulence and of the macroscopic MHD behavior, which provides some constraints on the temperature profile. Results indicate that the thermal conductivity associated with the dissipative trapped-electron mode and with the ion temperature gradient (eta/sub i/) mode can account, respectively, for the Neo-Alcator scaling and the saturation of the energy confinement time with density. Comparisons with experimental results show reasonable agreement. 32 refs., 12 figs.

  18. Towards a realistic prediction of the solar wind plasma microinstabilities

    NASA Astrophysics Data System (ADS)

    Lazar, Marian; Poedts, Stefaan; Schlickeiser, Reinhard

    2015-04-01

    Two scenarios are known for the origin of the field and density fluctuations observed in the solar wind. Thus, the fluctuations can be induced at different scales, either locally and self-consistently by the kinetic anisotropy of plasma particles, or can be injected at larger scales closer to the Sun and then decayed and transported by the super-Alfvénic wind. In both scenarios, details of the plasma microstates - the particle velocity distributions (VDFs), are needed for an accurate description of the fluctuations. In-situ measurements reveal nonequilibrium plasmas with VDFs comprising two major components, a Maxwellian (thermal) core and a less dense but hotter suprathermal halo with a power-law distribution best described by the Kappa models, and the field-aligned strahl as a third component, usually assimilated with the suprathermal populations. Despite this observational evidence, the existing attempts to parameterize the observed (anisotropic) distributions and the supporting fluctuations and instabilities are limited to simplified models, which either ignore the suprathermal halo or just minimize the role of the core assuming it cold, or artificially incorporates both the core and halo in a single, global Kappa that is nearly Maxwellian at low speeds and decreases smoothly as a power law at high speeds. Simplified models imply a reduced number of plasma parameters and are convenient computationally, but they omit important kinetic effects of the plasma particles. Realistic models imply a large number of parameters, especially in the presence of kinetic anisotropies, and make it difficult to identify the instability conditions. However, in a recent endeavor to investigate nonindealized situations when both the core and halo temperatures are finite and anisotropic, we found computationally tractable such a complex model that combines an anisotropic bi-Maxwellian core and an anisotropic bi-Kappa halo. This model is relevant for the slow wind conditions and, in

  19. RADAR Realistic Animal Model Series for Dose Assessment

    PubMed Central

    Keenan, Mary A.; Stabin, Michael G.; Segars, William P.; Fernald, Michael J.

    2010-01-01

    Rodent species are widely used in the testing and approval of new radiopharmaceuticals, necessitating murine phantom models. As more therapy applications are being tested in animal models, calculating accurate dose estimates for the animals themselves becomes important to explain and control potential radiation toxicity or treatment efficacy. Historically, stylized and mathematically based models have been used for establishing doses to small animals. Recently, a series of anatomically realistic human phantoms was developed using body models based on nonuniform rational B-spline. Realistic digital mouse whole-body (MOBY) and rat whole-body (ROBY) phantoms were developed on the basis of the same NURBS technology and were used in this study to facilitate dose calculations in various species of rodents. Methods Voxel-based versions of scaled MOBY and ROBY models were used with the Vanderbilt multinode computing network (Advanced Computing Center for Research and Education), using geometry and tracking radiation transport codes to calculate specific absorbed fractions (SAFs) with internal photon and electron sources. Photon and electron SAFs were then calculated for relevant organs in all models. Results The SAF results were compared with values from similar studies found in reference literature. Also, the SAFs were used with standardized decay data to develop dose factors to be used in radiation dose calculations. Representative plots were made of photon electron SAFs, evaluating the traditional assumption that all electron energy is absorbed in the source organs. Conclusion The organ masses in the MOBY and ROBY models are in reasonable agreement with models presented by other investigators noting that considerable variation can occur between reported masses. Results consistent with those found by other investigators show that absorbed fractions for electrons for organ self-irradiation were significantly less than 1.0 at energies above 0.5 MeV, as expected for many of

  20. Capillary Condensation Pathways of CO2 under Templated Mesoporous Silica Confinement

    NASA Astrophysics Data System (ADS)

    Wang, Bo; Sokol, Paul

    2014-03-01

    Adsorption of CO2 in porous medium has been of great current interest due to its potential for mitigating the global warming caused by greenhouse gases. In particular, the behavior of confined CO2 in mesoporous media near room temperature is particularly relevant to sequestration efforts. Realistic mesoporous systems, such as shales and coals, represent a complex fractal pore structure that complicates the interpretation of adsorption studies. We present the results of a study focused on the adsorption of CO2 in model mesoporous media with well-defined pore structures. Templated porous glasses, such as MCM-41 which has a regular network of 1D pores, provide an ideal system for fundamental studies of the adsorption process. In this study, we focus on the structure of adsorbed CO2 films which evolves in a mixture of phases and the development of nucleation occurs during the formation of high density liquid CO2 inside the confining matrix. We have used Small Angle Neutron Scattering to study the spatial distribution of material radially and transversely within the pores. The 30m SANS NG7 at NIST was used to map out the details of CO2 condensation pathway under mesoporous silica confinement.

  1. Effects of high sound speed confiners on ANFO detonations

    NASA Astrophysics Data System (ADS)

    Kiyanda, Charles; Jackson, Scott; Short, Mark

    2011-06-01

    The interaction between high explosive (HE) detonations and high sound speed confiners, where the confiner sound speed exceeds the HE's detonation speed, has not been thoroughly studied. The subsonic nature of the flow in the confiner allows stress waves to travel ahead of the main detonation front and influence the upstream HE state. The interaction between the detonation wave and the confiner is also no longer a local interaction, so that the confiner thickness now plays a significant role in the detonation dynamics. We report here on larger scale experiments in which a mixture of ammonium nitrate and fuel oil (ANFO) is detonated in aluminium confiners with varying charge diameter and confiner thickness. The results of these large-scale experiments are compared with previous large-scale ANFO experiments in cardboard, as well as smaller-scale aluminium confined ANFO experiments, to characterize the effects of confiner thickness.

  2. Will Realistic Fossil Fuel Burning Scenarios Prevent Catastrophic Climate Change?

    NASA Astrophysics Data System (ADS)

    Tans, P. P.; Rutledge, D.

    2012-12-01

    In the IPCC Special Report on Emissions Scenarios the driving forces are almost entirely demographic and socio-economic, with scant attention given to potential resource limitations. In a recent study D. Rutledge (2011) shows that in the case of historical coal production, a stable estimate, typically much lower than early estimates of reserves, of total long term production of a region can be obtained well before peak production is reached based on actual production numbers until that point. The estimates are based on produced quantities only, and appear to contradict the assumption of dominant control by socio-economic factors and improvements in technology. Therefore, a projection of climate forcing based on a emissions scenario close to the lowest of the IPCC scenarios may be more realistic. The longevity of the CO2 enhancement in the atmosphere and oceans is thousands of years. The partitioning of the CO2 enhancement between atmosphere and oceans, and thus climate forcing by CO2, is calculated until the year 2500. The fundamental difficulty of CO2 removal strategies is pointed out. The integral of climate forcing until 2500 under a low emissions scenario is still so large that climate change may become an impediment to human development in addition to higher energy costs. D. Rutledge, International J. Coal Geology 85, 23-33 (2011).

  3. Evolution of migration rate in a spatially realistic metapopulation model.

    PubMed

    Heino, M; Hanski, I

    2001-05-01

    We use an individual-based, spatially realistic metapopulation model to study the evolution of migration rate. We first explore the consequences of habitat change in hypothetical patch networks on a regular lattice. If the primary consequence of habitat change is an increase in local extinction risk as a result of decreased local population sizes, migration rate increases. A nonmonotonic response, with migration rate decreasing at high extinction rate, was obtained only by assuming very frequent catastrophes. If the quality of the matrix habitat deteriorates, leading to increased mortality during migration, the evolutionary response is more complex. As long as habitat patch occupancy does not decrease markedly with increased migration mortality, reduced migration rate evolves. However, once mortality becomes so high that empty patches remain uncolonized for a long time, evolution tends to increase migration rate, which may lead to an "evolutionary rescue" in a fragmented landscape. Kin competition has a quantitative effect on the evolution of migration rate in our model, but these patterns in the evolution of migration rate appear to be primarily caused by spatiotemporal variation in fitness and mortality during migration. We apply the model to real habitat patch networks occupied by two checkerspot butterfly (Melitaea) species, for which sufficient data are available to estimate rigorously most of the model parameters. The model-predicted migration rate is not significantly different from the empirically observed one. Regional variation in patch areas and connectivities leads to regional variation in the optimal migration rate, predictions that can be tested empirically. PMID:18707258

  4. Time-distance helioseismology of two realistic sunspot simulations

    SciTech Connect

    DeGrave, K.; Jackiewicz, J.; Rempel, M. E-mail: jasonj@nmsu.edu

    2014-10-10

    Linear time-distance helioseismic inversions are carried out using several filtering schemes to determine vector flow velocities within two ∼100{sup 2} Mm{sup 2} × 20 Mm realistic magnetohydrodynamic sunspot simulations of 25 hr. One simulation domain contains a model of a full sunspot (i.e., one with both an umbra and penumbra), while the other contains a pore (i.e., a spot without a penumbra). The goal is to test current helioseismic methods using these state-of-the-art simulations of magnetic structures. We find that horizontal flow correlations between inversion and simulation flow maps are reasonably high (∼0.5-0.8) in the upper 3 Mm at distances exceeding 25-30 Mm from spot center, but are substantially lower at smaller distances and larger depths. Inversions of forward-modeled travel times consistently outperform those of our measured travel times in terms of horizontal flow correlations, suggesting that our inability to recover flow structure near these active regions is largely due to the fact that we are unable to accurately measure travel times near strong magnetic features. In many cases the velocity amplitudes from the inversions underestimate those of the simulations by up to 50%, possibly indicating nonlinearity of the forward problem. In every case, we find that our inversions are unable to recover the vertical flow structure of the simulations at any depth.

  5. Realistic Modeling of Spontaneous Flow Eruptions in the Quiet Sun

    NASA Astrophysics Data System (ADS)

    Kitiashvili, Irina; Yoon, Seokkwan S

    2014-06-01

    Ground and space observations reveal that the solar surface is covered by high-speed jets transporting mass and energy into the solar corona and feeding the solar wind. The origin and driving forces of the observed eruptions are still unknown. Using realistic numerical simulations we find that small-scale plasma eruptions can be produced by ubiquitous magnetized vortex tubes generated in the Sun's turbulent convection. The vortex tubes (resembling tornadoes) penetrate into the solar atmosphere, capture and strengthen the background magnetic field, and push surrounding material up, generating impulses of Alfven waves and shocks. Our simulations reveal complicated high-speed flows, thermodynamic, and magnetic structures in the erupting vortex tubes. We find that the eruptions are initiated in the subsurface layers, and initially are driven by high-pressure gradients in the subphotosphere and photosphere, and are accelerated by the Lorentz force in the higher atmospheric layers. The eruptions are often quasi-periodic with a characteristic period of 2-5 min. These vortex eruptions have a complicated flow helical pattern, with predominantly downward flows in the vortex tube cores and upward flows in their surroundings. For comparison with observations we calculate full Stokes profiles in different wavelength for different space and ground instruments, such as HMI/SDO, Hinode, NST/BBSO, IMaX/Sunrise. In particular, we find that the observed eruption events are not always associated with strong magnetic field concentrations, and that strong field patches can be a source of several simultaneous eruptions.

  6. Adaptive self-organization in a realistic neural network model

    NASA Astrophysics Data System (ADS)

    Meisel, Christian; Gross, Thilo

    2009-12-01

    Information processing in complex systems is often found to be maximally efficient close to critical states associated with phase transitions. It is therefore conceivable that also neural information processing operates close to criticality. This is further supported by the observation of power-law distributions, which are a hallmark of phase transitions. An important open question is how neural networks could remain close to a critical point while undergoing a continual change in the course of development, adaptation, learning, and more. An influential contribution was made by Bornholdt and Rohlf, introducing a generic mechanism of robust self-organized criticality in adaptive networks. Here, we address the question whether this mechanism is relevant for real neural networks. We show in a realistic model that spike-time-dependent synaptic plasticity can self-organize neural networks robustly toward criticality. Our model reproduces several empirical observations and makes testable predictions on the distribution of synaptic strength, relating them to the critical state of the network. These results suggest that the interplay between dynamics and topology may be essential for neural information processing.

  7. A realistic 3+1D Viscous Hydro Algorithm

    SciTech Connect

    Romatschke, Paul

    2015-05-31

    DoE funds were used as bridge funds for the faculty position for the PI at the University of Colorado. The total funds for the Years 3-5 of the JET Topical Collaboration amounted to about 50 percent of the academic year salary of the PI.The PI contributed to the JET Topical Collaboration by developing, testing and applying algorithms for a realistic simulation of the bulk medium created in relativistic ion collisions.Specifically, two approaches were studied, one based on a new Lattice-Boltzmann (LB) framework, and one on a more traditional viscous hydro-dynamics framework. Both approaches were found to be viable in principle, with the LB approach being more elegant but needing still more time to develop.The traditional approach led to the super-hybrid model of ion collisions dubbed 'superSONIC', and has been successfully used for phenomenology of relativistic heavy-ion and light-on-heavy-ion collisions.In the time-frame of the JET Topical Collaboration, the Colorado group has published 15 articles in peer-reviewed journals, three of which were published in Physical Review Letters. The group graduated one Master student during this time-frame and two more PhD students are expected to graduate in the next few years. The PI has given more than 28 talks and presentations during this period.

  8. 'Narrative', now and then: a critical realist approach.

    PubMed

    Hanly, M F

    1996-06-01

    The author argues that the idea of a 'narrative approach' in psychoanalysis has come to imply that the history of the psyche of a patient is inaccessible and that what the analyst should aim to achieve is the co-construction of a 'story' agreed to by both analyst and patient. She examines some critical realist views on narrative that engage with the problem of how the past determines story-telling in the present. The narrative-hermeneutic perspective has emphasised how much a telling is shaped by the transference, in order, it seems, to urge analysts to forgo a 'naïve realism', an attempt to get at some 'bare facts' of the past, which would lose the bearing of much the patient is communicating in the present. This, as a technical reminder, is excellent. However, critical realism in psychoanalysis has always been sophisticated as opposed to naïve, because of our concern with the workings of oedipal and post-oedipal transformations, and with the workings of the transference. It is the thesis of this paper, written from the perspective of critical realism, that every interpretation, in so far as it contains a narrative truth, that is, speaks adequately of coherence and transference issues, will also refer to a significant aspect of the history of the patient's psyche. PMID:8818763

  9. Simulation of Combustion Systems with Realistic g-Jitter

    NASA Technical Reports Server (NTRS)

    Mell, W. E.; McGrattan, K. B.; Nakamura, Y.; Baum, H. R.

    2001-01-01

    A number of facilities are available for microgravity combustion experiments: aircraft, drop towers, sounding rockets, the space shuttle, and, in the future, the International Space Station (ISS). Acceleration disturbances or g-jitter about the background level of reduced gravity exist in all these microgravity facilities. While g-jitter is routinely measured, a quantitative comparison of the quality of g-jitter among the different microgravity facilities, in terms of its affects on combustion experiments, has not been compiled. Low frequency g-jitter (< 1 Hz) has been repeatedly observed to disturb a number of combustion systems. Guidelines regarding tolerable levels of acceleration disturbances for combustion experiments have been developed for use in the design of ISS experiments. The validity of these guidelines, however, remains unknown. In this project a transient, 3-D numerical model is under development to simulate the effects of realistic g-jitter on a number of combustion systems. The measured acceleration vector or some representation of it can be used as input to the simulation.

  10. A computational study of routing algorithms for realistic transportation networks

    SciTech Connect

    Jacob, R.; Marathe, M.V.; Nagel, K.

    1998-12-01

    The authors carry out an experimental analysis of a number of shortest path (routing) algorithms investigated in the context of the TRANSIMS (Transportation Analysis and Simulation System) project. The main focus of the paper is to study how various heuristic and exact solutions, associated data structures affected the computational performance of the software developed especially for realistic transportation networks. For this purpose the authors have used Dallas Fort-Worth road network with very high degree of resolution. The following general results are obtained: (1) they discuss and experimentally analyze various one-one shortest path algorithms, which include classical exact algorithms studied in the literature as well as heuristic solutions that are designed to take into account the geometric structure of the input instances; (2) they describe a number of extensions to the basic shortest path algorithm. These extensions were primarily motivated by practical problems arising in TRANSIMS and ITS (Intelligent Transportation Systems) related technologies. Extensions discussed include--(i) time dependent networks, (ii) multi-modal networks, (iii) networks with public transportation and associated schedules. Computational results are provided to empirically compare the efficiency of various algorithms. The studies indicate that a modified Dijkstra`s algorithm is computationally fast and an excellent candidate for use in various transportation planning applications as well as ITS related technologies.

  11. Beam tracking of SXLS with realistic magnetic field

    SciTech Connect

    Huang, Yun-Xiang

    1991-09-01

    In early 1977, while working for NSLS at Brookhaven National Lab., Dr. Ohnuma noticed that tunes of NSLS calculated with code SYNCH were significantly different from those obtained with code PATRICIA. This problem surfaced again in 1991 when people at BNL discovered discrepancies in their compact ring SXLS chromaticities calculated with different code. One potential source of the ambiguities is the different treatment of the edge field and the combined function field of dipole magnet. There are two dipoles each of which with the bending angle of 180{degrees} instead of at most a few degrees which is common in high energy synchrotrons. The calculation of a three-dimensional field using TOSCA indicates that the fringe field extends to cover the whole region between the dipole and the quadrupole, having a vertical field strength of 250 gauss at the edge of the quadrupole. In this case, the fringe multiple field will undoubtedly play a nontrival role in determining basic machine parameters. Therefore, the classical treatment for simulating particle motion in synchrotron, which uses the isomagnetic approximation plus then lens kicks, no longer accurately models the closed orbit of the machine. In order to correctly calculate tunes, chromaticities as well as the dynamic aperture in such kind of machine with a large magnetic bending angle, it is necessary to integrate the exact equations of motion in a realistic representation of the magnetic field.

  12. Is there hope for spintronics in one dimensional realistic systems?

    NASA Astrophysics Data System (ADS)

    Rocha, Alexandre; Martins, Thiago; Fazzio, Adalberto; da Silva, Antônio J. R.

    2010-03-01

    The use of the electron spin as the ultimate logic bit can lead to a novel way of thinking about information flow. At the same time graphene, a gapless semiconductor, has been the subject of intense research due to its fundamental properties and its potential application in electronics. Defects are usually seen as having deleterious effects on the spin polarization of devices and thus they would tend to hinder the applicability of spintronics in realistic devices. Here we use a ab initio methods to simulate the electronic transport properties of graphene nanoribbons up to 450 nm long containing a large number of randomly distributed impurities. We will demonstrate that it is possible to obtain perfect spin selectivity in these nanoribbons which can be explained in terms of different localization lengths for each spin channel. This together with the well know exponential dependence of the conductance on the length of the device leads to a new mechanism for the spin filtering effect that is in fact driven by disorder. Furthermore, we demonstrate that this is an effect that does not depend on the underlying system itself and could be observed in carbon nanotubes and nanowires or any other one-dimensional device.

  13. Conceptual priming for realistic auditory scenes and for auditory words.

    PubMed

    Frey, Aline; Aramaki, Mitsuko; Besson, Mireille

    2014-02-01

    Two experiments were conducted using both behavioral and Event-Related brain Potentials methods to examine conceptual priming effects for realistic auditory scenes and for auditory words. Prime and target sounds were presented in four stimulus combinations: Sound-Sound, Word-Sound, Sound-Word and Word-Word. Within each combination, targets were conceptually related to the prime, unrelated or ambiguous. In Experiment 1, participants were asked to judge whether the primes and targets fit together (explicit task) and in Experiment 2 they had to decide whether the target was typical or ambiguous (implicit task). In both experiments and in the four stimulus combinations, reaction times and/or error rates were longer/higher and the N400 component was larger to ambiguous targets than to conceptually related targets, thereby pointing to a common conceptual system for processing auditory scenes and linguistic stimuli in both explicit and implicit tasks. However, fine-grained analyses also revealed some differences between experiments and conditions in scalp topography and duration of the priming effects possibly reflecting differences in the integration of perceptual and cognitive attributes of linguistic and nonlinguistic sounds. These results have clear implications for the building-up of virtual environments that need to convey meaning without words. PMID:24378910

  14. Promoting nutrition in commercial foodservice establishments: a realistic approach.

    PubMed

    Regan, C

    1987-04-01

    Americans are eating out an average of 3.7 times per week and are spending almost 40% of their food dollar doing so. A Gallup Survey shows about 39% of consumers claim to have improved their eating habits while eating out, but restaurant patrons are most concerned about nutrition when dining out on a routine visit or while in a family-style restaurant. Restaurant patrons are also now more likely to order lower sodium meals, small-size portions, and lower calorie entrées. Although the opportunity to promote nutrition in the foodservice setting exists, restaurant chefs and managers often lack the background to take advantage of it and could benefit from the services of qualified nutrition professionals. Dietitians could assist in identifying menu items appropriate for nutrition promotion, recipe development, and staff training. However, a realistic approach must be maintained, and the following facts should be kept in mind: Nutritious restaurant fare should blend with the theme of the menu and be promoted primarily on its sensory attributes. Nutrition in restaurants is best received when promoted generally and within the scope of health and wellness. Descriptive menu items should be carefully used. A restaurant consultant should be current on controversial food and nutrition trends. The wait staff should be properly trained. PMID:3559009

  15. Convective aggregation in idealised models and realistic equatorial cases

    NASA Astrophysics Data System (ADS)

    Holloway, Chris

    2015-04-01

    Idealised explicit convection simulations of the Met Office Unified Model are shown to exhibit spontaneous self-aggregation in radiative-convective equilibrium, as seen previously in other models in several recent studies. This self-aggregation is linked to feedbacks between radiation, surface fluxes, and convection, and the organization is intimately related to the evolution of the column water vapour (CWV) field. To investigate the relevance of this behaviour to the real world, these idealized simulations are compared with five 15-day cases of real organized convection in the tropics, including multiple simulations of each case testing sensitivities of the convective organization and mean states to interactive radiation, interactive surface fluxes, and evaporation of rain. Despite similar large-scale forcing via lateral boundary conditions, systematic differences in mean CWV, CWV distribution shape, and the length scale of CWV features are found between the different sensitivity runs, showing that there are at least some similarities in sensitivities to these feedbacks in both idealized and realistic simulations.

  16. A simple and realistic model of supersymmetry breaking

    SciTech Connect

    Nomura, Yasunori; Papucci, Michele

    2007-09-25

    We present a simple and realistic model of supersymmetry breaking. In addition to the minimal supersymmetric standard model, we only introduce a hidden sector gauge group SU(5) and three fields X, F and \\bar{F}. Supersymmetry is broken at a local minimum of the potential, and its effects are transmitted to the supersymmetric standard model sector through both standard model gauge loops and local operators suppressed by the cutoff scale, which is taken to be the unification scale. The form of the local operators is controlled by a U(1) symmetry. The generated supersymmetry breaking and mu parameters are comparable in size, and no flavor or CP violating terms arise. The spectrum of the first two generation superparticles is that of minimal gauge mediation with the number of messengers N_mess = 5 and the messenger scale 1011 GeV< M_mess< 1013 GeV. The spectrum of the Higgs bosons and third generation superparticles, however, can deviate from it. The lightest supersymmetric particle is the gravitino with a mass of order (1-10) GeV.

  17. High Energy Atmospheric Neutrino Fluxes From a Realistic Primary Spectrum

    NASA Astrophysics Data System (ADS)

    Campos Penha, Felipe; Dembinski, Hans; Gaisser, Thomas K.; Tilav, Serap

    2016-03-01

    Atmospheric neutrino fluxes depend on the energy spectrum of primary nucleons entering the top of the atmosphere. Before the advent of AMANDA and the IceCube Neutrino Observatory, measurements of the neutrino fluxes were generally below ~ 1TeV , a regime in which a simple energy power law sufficed to describe the primary spectrum. Now, IceCube's muon neutrino data extends beyond 1PeV , including a combination of neutrinos from astrophysical sources with background from atmospheric neutrinos. At such high energies, the steepening at the knee of the primary spectrum must be accounted for. Here, we describe a semi-analytical approach for calculating the atmospheric differential neutrino fluxes at high energies. The input is a realistic primary spectrum consisting of 4 populations with distinct energy cutoffs, each with up to 7 representative nuclei, where the parameters were extracted from a global fit. We show the effect of each component on the atmospheric neutrino spectra, above 10TeV . The resulting features follow directly from recent air shower measurements included in the fit. Felipe Campos Penha gratefully acknowledges financial support from CAPES (Processo BEX 5348/14-5), CNPq (Processo 142180/2012-2), and the Bartol Research Institute.

  18. Improved transcranial magnetic stimulation coil design with realistic head modeling

    NASA Astrophysics Data System (ADS)

    Crowther, Lawrence; Hadimani, Ravi; Jiles, David

    2013-03-01

    We are investigating Transcranial magnetic stimulation (TMS) as a noninvasive technique based on electromagnetic induction which causes stimulation of the neurons in the brain. TMS can be used as a pain-free alternative to conventional electroconvulsive therapy (ECT) which is still widely implemented for treatment of major depression. Development of improved TMS coils capable of stimulating subcortical regions could also allow TMS to replace invasive deep brain stimulation (DBS) which requires surgical implantation of electrodes in the brain. Our new designs allow new applications of the technique to be established for a variety of diagnostic and therapeutic applications of psychiatric disorders and neurological diseases. Calculation of the fields generated inside the head is vital for the use of this method for treatment. In prior work we have implemented a realistic head model, incorporating inhomogeneous tissue structures and electrical conductivities, allowing the site of neuronal activation to be accurately calculated. We will show how we utilize this model in the development of novel TMS coil designs to improve the depth of penetration and localization of stimulation produced by stimulator coils.

  19. GRACE follow-on sensor noise with realistic background models

    NASA Astrophysics Data System (ADS)

    Ellmer, Matthias; Mayer-Gürr, Torsten

    2015-04-01

    We performed multiple simulation studies of a GRACE-like satellite mission based on the current K-Band ranging instrument (KBR). We also simulated a laser-ranging instrument (LRI) configuration as a drop-in replacement for GRACE low-low satellite to satellite tracking, the remaining parameters of the simulation are shared between the two scenarios. Our simulated data are based on real GRACE observations for April 2006, which allows us to compare our results to published gravity field models for this particular month. The variational equation approach was employed to generate independent reduced-dynamic orbits for both GRACE satellites. These orbits were then fitted to the actual GRACE kinematic orbits. The resulting orbit was then used to synthesize artificial satellite ranging, star camera, accelerometer and kinematic orbit data. We synchronized all simulated instruments with real instrument data for the simulated month, which guarantees realistic data gaps. Appropriate noise was added to all observables. In the recovery step, the AOD1B de-aliasing product -- previously used in the generation of the fundamental reduced-dynamic orbit data -- was degraded with partial constituents of the updated ESA earth system model dataset. Specifically, the atmosphere, ocean, and hydrology components were used. This has the effect that the computed gravity field possesses the characteristic structure associated with a residual time-variable gravity field signal. An overview of the achieved results is given in the presentation.

  20. Karstification beneath dam sites: From conceptual models to realistic scenarios

    NASA Astrophysics Data System (ADS)

    Hiller, Thomas; Kaufmann, Georg; Romanov, Douchko

    2010-05-01

    Dam sites located above soluble rock such as limestone or gypsum can leak in relatively short times (tenths of years), when compared to the natural time scale of karstification (10.000-100.000 years). The reason for this leakage is the high hydraulic gradient imposed by the reservoir that drives aggressive water through the fracture and fissure system of the bedrock and this aggressive water dissolves the rock and increases permeability fairly fast. Thus, on the one hand water losses through enlarged fractures can become a problem for the reservoir. On the other hand, the void space itself can be a risk for the dam structure above. This may have unpredictable ecological and economical consequences. We present a three-dimensional conceptual model study of karstification in dam-site areas on limestone bedrock. We compare our three-dimensional model to a standard two-dimensional dam site model to verify the results of our code. We further carry out a sensitivity analysis on the physical and chemical parameters driving the karstification to derive an empirical formulation of the breakthrough time TB. In a next step we implement a statistical fracture network and topography to approach a more realistic scenario. Finally we show the results of a three dimensional model based on a real dam site.

  1. Unsteady transonic algorithm improvements for realistic aircraft applications

    NASA Technical Reports Server (NTRS)

    Batina, John T.

    1987-01-01

    Improvements to a time-accurate approximate factorization (AF) algorithm were implemented for steady and unsteady transonic analysis of realistic aircraft configurations. These algorithm improvements were made to the CAP-TSD (Computational Aeroelasticity Program - Transonic Small Disturbance) code developed at the Langley Research Center. The code permits the aeroelastic analysis of complete aircraft in the flutter critical transonic speed range. The AF algorithm of the CAP-TSD code solves the unsteady transonic small-disturbance equation. The algorithm improvements include: an Engquist-Osher (E-O) type-dependent switch to more accurately and efficiently treat regions of supersonic flow; extension of the E-O switch for second-order spatial accuracy in these regions; nonreflecting far field boundary conditions for more accurate unsteady applications; and several modifications which accelerate convergence to steady-state. Calculations are presented for several configurations including the General Dynamics one-ninth scale F-16C aircraft model to evaluate the algorithm modifications. The modifications have significantly improved the stability of the AF algorithm and hence the reliability of the CAP-TSD code in general.

  2. Reconstruction of spatial qutrit states based on realistic measurement operators

    SciTech Connect

    Taguchi, Gen; Dougakiuchi, Tatsuo; Iinuma, Masataka; Hofmann, Holger F.; Kadoya, Yutaka

    2009-12-15

    Spatial qudit states can be realized by using multislits to discretize the transverse momentum of a photon. The merit of this kind of spatial qudit states is that the implementation of higher-dimensional qudits is relatively easy. As we have recently shown, the quantum states of these spatial qudits can be analyzed by scanning a single interference pattern. This method of single scan tomography can also be applied at higher dimensions, but the reconstruction becomes more sensitive to smaller details of the scanned patterns as the dimensions increase. In this paper, we investigate the effect of finite measurement resolution on the single scan tomography of spatial qutrits. Realistic measurement operators describing the spatial resolution of the measurement are introduced and the corresponding pattern functions for quantum state reconstruction are derived. We use the pattern functions to analyze experimental results for entangled pairs of spatial qutrits generated by spontaneous parametric downconversion. It is shown that a reliable reconstruction of the quantum state can be achieved with finite measurement resolution if this limitation of the measurement is included in the pattern functions of single scan tomography.

  3. Super stereoscopy technique for comfortable and realistic 3D displays.

    PubMed

    Akşit, Kaan; Niaki, Amir Hossein Ghanbari; Ulusoy, Erdem; Urey, Hakan

    2014-12-15

    Two well-known problems of stereoscopic displays are the accommodation-convergence conflict and the lack of natural blur for defocused objects. We present a new technique that we name Super Stereoscopy (SS3D) to provide a convenient solution to these problems. Regular stereoscopic glasses are replaced by SS3D glasses which deliver at least two parallax images per eye through pinholes equipped with light selective filters. The pinholes generate blur-free retinal images so as to enable correct accommodation, while the delivery of multiple parallax images per eye creates an approximate blur effect for defocused objects. Experiments performed with cameras and human viewers indicate that the technique works as desired. In case two, pinholes equipped with color filters per eye are used; the technique can be used on a regular stereoscopic display by only uploading a new content, without requiring any change in display hardware, driver, or frame rate. Apart from some tolerable loss in display brightness and decrease in natural spatial resolution limit of the eye because of pinholes, the technique is quite promising for comfortable and realistic 3D vision, especially enabling the display of close objects that are not possible to display and comfortably view on regular 3DTV and cinema. PMID:25503026

  4. Effective diffusion of confined active Brownian swimmers.

    PubMed

    Sandoval, Mario; Dagdug, Leornardo

    2014-12-01

    We theoretically find the effect of confinement and thermal fluctuations on the diffusivity of a spherical active swimmer moving inside a two-dimensional narrow cavity of general shape. The explicit formulas for the effective diffusion coefficient of a swimmer moving inside two particular cavities are presented. We also compare our analytical results with Brownian dynamics simulations and we obtain excellent agreement. PMID:25615133

  5. Clusters of polyhedra in spherical confinement

    PubMed Central

    Teich, Erin G.; van Anders, Greg; Klotsa, Daphne; Dshemuchadse, Julia; Glotzer, Sharon C.

    2016-01-01

    Dense particle packing in a confining volume remains a rich, largely unexplored problem, despite applications in blood clotting, plasmonics, industrial packaging and transport, colloidal molecule design, and information storage. Here, we report densest found clusters of the Platonic solids in spherical confinement, for up to N=60 constituent polyhedral particles. We examine the interplay between anisotropic particle shape and isotropic 3D confinement. Densest clusters exhibit a wide variety of symmetry point groups and form in up to three layers at higher N. For many N values, icosahedra and dodecahedra form clusters that resemble sphere clusters. These common structures are layers of optimal spherical codes in most cases, a surprising fact given the significant faceting of the icosahedron and dodecahedron. We also investigate cluster density as a function of N for each particle shape. We find that, in contrast to what happens in bulk, polyhedra often pack less densely than spheres. We also find especially dense clusters at so-called magic numbers of constituent particles. Our results showcase the structural diversity and experimental utility of families of solutions to the packing in confinement problem. PMID:26811458

  6. Morphology of diblock copolymers under confinement

    NASA Astrophysics Data System (ADS)

    Ackerman, David; Ganapathysubramanian, Baskar

    The structure adopted by polymer chains is of particular intrest for materials design. In particular, a great deal of effort has been made to study diblock polymers due to the importance they have in industrial applications. The bulk structure of most systems has been the most widely studied. However, when under the effect of confinement, the polymer chains are forced to adopt structures differing from the familiar bulk phases. As many applications utilize polymers in sizes and shapes that lead to these non bulk structures, the confinement effects are important. A commonly used tool for computationally determining structures is the continuum self consistant field theory (SCFT). We discuss our highly scalable parallel framework for SCFT using real space methods (finite element) that is especially well suited to modelling complex geometries. This framework is capable of modeling both Gaussian and worm like chains. We illustate the use of the software framework in determining structures under varying degrees of confinement. We detail the method used and present selected results from a systematic study of confinement using arbitrary structures.

  7. Nuclear diagnostics for inertial confinement fusion implosions

    SciTech Connect

    Murphy, T.J.

    1997-11-01

    This abstract contains viewgraphs on nuclear diagnostic techniques for inertial confinement fusion implosions. The viewgraphs contain information on: reactions of interest in ICF; advantages and disadvantages of these methods; the properties nuclear techniques can measure; and some specifics on the detectors used.

  8. Visualizing chemical reactions confined under graphene.

    PubMed

    Mu, Rentao; Fu, Qiang; Jin, Li; Yu, Liang; Fang, Guangzong; Tan, Dali; Bao, Xinhe

    2012-05-14

    An undercover agent: graphene has been used as an imaging agent to visualize interfacial reactions under its cover, and exhibits a strong confinement effect on the chemistry of molecules underneath. In a CO atmosphere, CO penetrates into the graphene/Pt(111) interface and reacts with O(2) therein, whereas intercalated CO desorbs from the Pt surface. PMID:22492473

  9. Holographic thermalization in a quark confining background

    SciTech Connect

    Ageev, D. S. Aref’eva, I. Ya.

    2015-03-15

    We study holographic thermalization of a strongly coupled theory inspired by two colliding shock waves in a vacuum confining background. Holographic thermalization means a black hole formation, in fact, a trapped surface formation. As the vacuum confining background, we considered the well-know bottom-up AdS/QCD model that provides the Cornell potential and reproduces the QCD β-function. We perturb the vacuum background by colliding domain shock waves that are assumed to be holographically dual to heavy ions collisions. Our main physical assumption is that we can make a restriction on the time of trapped surface formation, which results in a natural limitation on the size of the domain where the trapped surface is produced. This limits the intermediate domain where the main part of the entropy is produced. In this domain, we can use an intermediate vacuum background as an approximation to the full confining background. We find that the dependence of the multiplicity on energy for the intermediate background has an asymptotic expansion whose first term depends on energy as E{sup 1/3}, which is very similar to the experimental dependence of particle multiplicities on the colliding ion energy obtained from the RHIC and LHC. However, this first term, at the energies where the approximation of the confining metric by the intermediate background works, does not saturate the exact answer, and we have to take the nonleading terms into account.

  10. Monosymptomatic hypochondriacal psychosis and prolonged solitary confinement.

    PubMed

    Humphreys, M; Burnett, F

    1994-10-01

    A man previously imprisoned for 11 years developed unremitting and treatment-resistant monosymptomatic hypochondriacal psychosis following a period in excess of 12 months in solitary confinement. We are unaware of any other reported incidences of this disorder arising in such circumstances. PMID:7830522

  11. Clusters of polyhedra in spherical confinement.

    PubMed

    Teich, Erin G; van Anders, Greg; Klotsa, Daphne; Dshemuchadse, Julia; Glotzer, Sharon C

    2016-02-01

    Dense particle packing in a confining volume remains a rich, largely unexplored problem, despite applications in blood clotting, plasmonics, industrial packaging and transport, colloidal molecule design, and information storage. Here, we report densest found clusters of the Platonic solids in spherical confinement, for up to [Formula: see text] constituent polyhedral particles. We examine the interplay between anisotropic particle shape and isotropic 3D confinement. Densest clusters exhibit a wide variety of symmetry point groups and form in up to three layers at higher N. For many N values, icosahedra and dodecahedra form clusters that resemble sphere clusters. These common structures are layers of optimal spherical codes in most cases, a surprising fact given the significant faceting of the icosahedron and dodecahedron. We also investigate cluster density as a function of N for each particle shape. We find that, in contrast to what happens in bulk, polyhedra often pack less densely than spheres. We also find especially dense clusters at so-called magic numbers of constituent particles. Our results showcase the structural diversity and experimental utility of families of solutions to the packing in confinement problem. PMID:26811458

  12. Reactions over catalysts confined in carbon nanotubes.

    PubMed

    Pan, Xiulian; Bao, Xinhe

    2008-12-21

    We review a new concept for modifying the redox properties of transition metals via confinement within the channels of carbon nanotubes (CNTs), and thus tuning their catalytic performance. Attention is also devoted to novel techniques for homogeneous dispersion of metal nanoparticles inside CNTs since these are essential for optimization of the catalytic activity. PMID:19048128

  13. Somersault of Paramecium in extremely confined environments

    PubMed Central

    Jana, Saikat; Eddins, Aja; Spoon, Corrie; Jung, Sunghwan

    2015-01-01

    We investigate various swimming modes of Paramecium in geometric confinements and a non-swimming self-bending behavior like a somersault, which is quite different from the previously reported behaviors. We observe that Paramecia execute directional sinusoidal trajectories in thick fluid films, whereas Paramecia meander around a localized region and execute frequent turns due to collisions with adjacent walls in thin fluid films. When Paramecia are further constrained in rectangular channels narrower than the length of the cell body, a fraction of meandering Paramecia buckle their body by pushing on the channel walls. The bucking (self-bending) of the cell body allows the Paramecium to reorient its anterior end and explore a completely new direction in extremely confined spaces. Using force deflection method, we quantify the Young’s modulus of the cell and estimate the swimming and bending powers exerted by Paramecium. The analysis shows that Paramecia can utilize a fraction of its swimming power to execute the self-bending maneuver within the confined channel and no extra power may be required for this new kind of self-bending behavior. This investigation sheds light on how micro-organisms can use the flexibility of the body to actively navigate within confined spaces. PMID:26286234

  14. Energy confinement and profile consistency in TFTR

    SciTech Connect

    Goldston, R.J.; Arunasalan, V.; Bell, M.G.; Bitter, M.; Blanchard, W.R.; Bretz, N.L.; Budny, R.; bush, C.E.; Callen, J.D.; Cohen, S.A.

    1987-04-01

    A new regime of enhanced energy confinement has been observed on TFTR with neutral beam injection at low plasma current. It is characterized by extremely peaked electron density profiles and broad electron temperature profiles. The electron temperature profile shapes violate the concept of profile consistency in which T/sub e/(O)//sub v/ is assumed to be a tightly constrained function of q/sub a/, but they are in good agreement with a form of profile consistency based on examining the temperature profile shape outside the plasma core. The enhanced confinement regime is only obtained with a highly degassed limiter; in discharges with gas-filled limiters convective losses are calculated to dominate the edge electron power balance. Consistent with the constraint of profile consistency, global confinement is degraded in these cases. The best heating results in the enhanced confinement regime are obtained with nearly balanced co- and counter-injection. Much of the difference between balanced and co-only injection can be explained on the basis of classically predicted effects associated with plasma rotation.

  15. Somersault of Paramecium in extremely confined environments.

    PubMed

    Jana, Saikat; Eddins, Aja; Spoon, Corrie; Jung, Sunghwan

    2015-01-01

    We investigate various swimming modes of Paramecium in geometric confinements and a non-swimming self-bending behavior like a somersault, which is quite different from the previously reported behaviors. We observe that Paramecia execute directional sinusoidal trajectories in thick fluid films, whereas Paramecia meander around a localized region and execute frequent turns due to collisions with adjacent walls in thin fluid films. When Paramecia are further constrained in rectangular channels narrower than the length of the cell body, a fraction of meandering Paramecia buckle their body by pushing on the channel walls. The bucking (self-bending) of the cell body allows the Paramecium to reorient its anterior end and explore a completely new direction in extremely confined spaces. Using force deflection method, we quantify the Young's modulus of the cell and estimate the swimming and bending powers exerted by Paramecium. The analysis shows that Paramecia can utilize a fraction of its swimming power to execute the self-bending maneuver within the confined channel and no extra power may be required for this new kind of self-bending behavior. This investigation sheds light on how micro-organisms can use the flexibility of the body to actively navigate within confined spaces. PMID:26286234

  16. Somersault of Paramecium in extremely confined environments

    NASA Astrophysics Data System (ADS)

    Jana, Saikat; Eddins, Aja; Spoon, Corrie; Jung, Sunghwan

    2015-08-01

    We investigate various swimming modes of Paramecium in geometric confinements and a non-swimming self-bending behavior like a somersault, which is quite different from the previously reported behaviors. We observe that Paramecia execute directional sinusoidal trajectories in thick fluid films, whereas Paramecia meander around a localized region and execute frequent turns due to collisions with adjacent walls in thin fluid films. When Paramecia are further constrained in rectangular channels narrower than the length of the cell body, a fraction of meandering Paramecia buckle their body by pushing on the channel walls. The bucking (self-bending) of the cell body allows the Paramecium to reorient its anterior end and explore a completely new direction in extremely confined spaces. Using force deflection method, we quantify the Young’s modulus of the cell and estimate the swimming and bending powers exerted by Paramecium. The analysis shows that Paramecia can utilize a fraction of its swimming power to execute the self-bending maneuver within the confined channel and no extra power may be required for this new kind of self-bending behavior. This investigation sheds light on how micro-organisms can use the flexibility of the body to actively navigate within confined spaces.

  17. Chirally symmetric but confining dense, cold matter

    SciTech Connect

    Glozman, L. Ya.; Wagenbrunn, R. F.

    2008-03-01

    The folklore tradition about the QCD phase diagram is that at the chiral restoration phase transition at finite density hadrons are deconfined and there appears the quark matter. We address this question within the only known exactly solvable confining and chirally symmetric model. It is postulated within this model that there exists linear Coulomb-like confining interaction. The chiral symmetry breaking and the quark Green function are obtained from the Schwinger-Dyson (gap) equation while the color-singlet meson spectrum results from the Bethe-Salpeter equation. We solve this model at T=0 and finite chemical potential {mu} and obtain a clear chiral restoration phase transition at the critical value {mu}{sub cr}. Below this value the spectrum is similar to the previously obtained one at {mu}=0. At {mu}>{mu}{sub cr} the quarks are still confined and the physical spectrum consists of bound states which are arranged into a complete set of exact chiral multiplets. This explicitly demonstrates that a chirally symmetric matter consisting of confined but chirally symmetric hadrons at finite chemical potential is also possible in QCD. If so, there must be nontrivial implications for astrophysics.

  18. Chirally symmetric but confining dense, cold matter

    NASA Astrophysics Data System (ADS)

    Glozman, L. Ya.; Wagenbrunn, R. F.

    2008-03-01

    The folklore tradition about the QCD phase diagram is that at the chiral restoration phase transition at finite density hadrons are deconfined and there appears the quark matter. We address this question within the only known exactly solvable confining and chirally symmetric model. It is postulated within this model that there exists linear Coulomb-like confining interaction. The chiral symmetry breaking and the quark Green function are obtained from the Schwinger-Dyson (gap) equation while the color-singlet meson spectrum results from the Bethe-Salpeter equation. We solve this model at T=0 and finite chemical potential μ and obtain a clear chiral restoration phase transition at the critical value μcr. Below this value the spectrum is similar to the previously obtained one at μ=0. At μ>μcr the quarks are still confined and the physical spectrum consists of bound states which are arranged into a complete set of exact chiral multiplets. This explicitly demonstrates that a chirally symmetric matter consisting of confined but chirally symmetric hadrons at finite chemical potential is also possible in QCD. If so, there must be nontrivial implications for astrophysics.

  19. National Ignition Facility for Inertial Confinement Fusion

    SciTech Connect

    Paisner, J.A.; Murray, J.R.

    1997-10-08

    The National Ignition Facility for inertial confinement fusion will contain a 1.8 MJ, 500 TW frequency-tripled neodymium glass laser system that will be used to explore fusion ignition and other problems in the physics of high temperature and density. We describe the facility briefly. The NIF is scheduled to be completed in 2003.

  20. Condensation of topological defects and confinement

    NASA Astrophysics Data System (ADS)

    Gaete, Patricio; Wotzasek, Clovis

    2004-11-01

    We study the static quantum potential for a theory of antisymmetric tensor fields that results from the condensation of topological defects, within the framework of the gauge-invariant but path-dependent variables formalism. Our calculations show that the interaction energy is the sum of a Yukawa and a linear potentials, leading to the confinement of static probe charges.

  1. Myoglobin unfolding in crowding and confinement.

    PubMed

    Malik, Ashima; Kundu, Jayanta; Mukherjee, Sanjib K; Chowdhury, Pramit K

    2012-11-01

    Crowding and confinement have often been used synonymously with regard to their effect on the structure and dynamics of proteins. In this work, we have investigated the unfolding of the protein myoglobin (Mb) entrapped in the confinement of the water pool of AOT reverse micelles and in the presence of some commonly used macromolecular crowding agents (Ficoll 70, Dextran 70, and Dextran 40). Our results reveal that confinement effects can be quite destabilizing in nature for Mb with the extent of distortion depending on a host of factors apart from the size of the confining cage. Effects of the crowding agents on myoglobin also show a deviation from the general notion that synthetic macromolecular crowding agents are always stabilizing in nature. Ficoll 70 was observed to be particularly destabilizing in its influence on Mb unfolding. Moreover, tryptophan lifetime studies point to the fact that the Trp-heme distance in Mb might not always be a reliable probe of the secondary structural dissolution of the protein. PMID:23025527

  2. Wellhead protection in confined, semi-confined, fractured and karst aquifer settings

    SciTech Connect

    Not Available

    1993-09-01

    Protection areas around wells producing from confined, fractured, and karst aquifers are, because of their complex hydrogeology, more difficult to define than protection areas for wells in porous media settings. The factsheet provides background information explaining the need to define protection areas for wells that draw public drinking water from several complex hydrogeologic settings: confined, semi-confined, fractured, and karst aquifers. These settings include aquifers in which the ground water is not open to the atmosphere, or the aquifer does not consist of unconsolidated porous media. Several figures illustrate these settings in a general way.

  3. FINAL REPORT: Room Temperature Hydrogen Storage in Nano-Confined Liquids

    SciTech Connect

    VAJO, JOHN

    2014-06-12

    DOE continues to seek solid-state hydrogen storage materials with hydrogen densities of ≥6 wt% and ≥50 g/L that can deliver hydrogen and be recharged at room temperature and moderate pressures enabling widespread use in transportation applications. Meanwhile, development including vehicle engineering and delivery infrastructure continues for compressed-gas hydrogen storage systems. Although compressed gas storage avoids the materials-based issues associated with solid-state storage, achieving acceptable volumetric densities has been a persistent challenge. This project examined the possibility of developing storage materials that would be compatible with compressed gas storage technology based on enhanced hydrogen solubility in nano-confined liquid solvents. These materials would store hydrogen in molecular form eliminating many limitations of current solid-state materials while increasing the volumetric capacity of compressed hydrogen storage vessels. Experimental methods were developed to study hydrogen solubility in nano-confined liquids. These methods included 1) fabrication of composites comprised of volatile liquid solvents for hydrogen confined within the nano-sized pore volume of nanoporous scaffolds and 2) measuring the hydrogen uptake capacity of these composites without altering the composite composition. The hydrogen storage capacities of these nano-confined solvent/scaffold composites were compared with bulk solvents and with empty scaffolds. The solvents and scaffolds were varied to optimize the enhancement in hydrogen solubility that accompanies confinement of the solvent. In addition, computational simulations were performed to study the molecular-scale structure of liquid solvent when confined within an atomically realistic nano-sized pore of a model scaffold. Confined solvent was compared with similar simulations of bulk solvent. The results from the simulations were used to formulate a mechanism for the enhanced solubility and to guide the

  4. A realistic, gradual and economical approach to fusion power

    NASA Astrophysics Data System (ADS)

    Szoeke, A.; Moir, R. W.

    1991-06-01

    This article describes, in broad outline, a nuclear power plant that generates power by means of repetitive, low-yield explosions in an underground chamber. Such a plant can be built in the near future by using modest extensions of existing technology, and it could be economically competitive if certain parts of the cost are controlled. This is in contrast to magnetic and inertial confinement fusion, of which the technical and economic feasibility will remain highly uncertain for the foreseeable future. Technical improvements of the envisioned plant can be introduced gradually with corresponding reductions in cost of power production. With advancing technology, an increasingly larger fraction of the power can be extracted from fusion reactions, thus providing a smooth transition to a fusion-based economy. Eventually, pure (inertial) fusion schemes could be incorporated into the power plant in a natural way, thereby shortening the time required to achieve large-scale use of fusion power, possibly by decades. This article considers both the technical aspects of this route to fusion power and the relevant issues of public policy.

  5. A three-dimensional ground-water-flow model modified to reduce computer-memory requirements and better simulate confining-bed and aquifer pinchouts

    USGS Publications Warehouse

    Leahy, P.P.

    1982-01-01

    The Trescott computer program for modeling groundwater flow in three dimensions has been modified to (1) treat aquifer and confining bed pinchouts more realistically and (2) reduce the computer memory requirements needed for the input data. Using the original program, simulation of aquifer systems with nonrectangular external boundaries may result in a large number of nodes that are not involved in the numerical solution of the problem, but require computer storage. (USGS)

  6. Foreword: In situ gas surface interactions: approaching realistic conditions

    NASA Astrophysics Data System (ADS)

    Lundgren, Edvin; Over, Herbert

    2008-03-01

    This special issue is devoted to the application of in situ surface-sensitive techniques in the elucidation of catalysed reactions at (model) catalyst surfaces. Both reaction intermediates and the nature of the catalytically active phase are the targets of these investigations. In situ surface science techniques are also used to study the interaction of water with surfaces under realistic conditions. Since 80% of all technical chemicals are manufactured by utilizing (heterogeneous) catalysis, scientific understanding and technological development of catalysis are of central practical importance in modern society [1]. Heterogeneously catalysed reactions take place at the gas/solid interface. Therefore one of the major topics in surface chemistry and physics is closely related to heterogeneous catalysis, with the aim of developing novel catalysts and to improve catalysts' performances on the basis of atomic scale based knowledge. Despite the economical and environmental rewards—if such a goal is achieved—and despite 40 years of intensive research, practical catalysis is still safely in a black box: the reactivity and selectivity of a catalyst are commercially still optimized on a trial and error basis, applying the high throughput screening approach. The reason for this discrepancy between ambition and reality lies in the inherent complexity of the catalytic system, consisting of the working catalyst and the interaction of the catalyst with the reactant mixture. Practical (solid) catalysts consist of metal or oxide nanoparticles which are dispersed and stabilized on a support and which may be promoted by means of additives. These particles catalyse a reaction in pressures as high as 100 bar. Practical catalysis is in general considered to be far too complex for gaining atomic-scale understanding of the mechanism of the catalysed reaction of an industrial catalyst during its operation. Therefore it has been necessary to introduce idealization and simplification of

  7. Realistic Goals and Processes for Future Space Astronomy Portfolio Planning

    NASA Astrophysics Data System (ADS)

    Morse, Jon

    2015-08-01

    It is generally recognized that international participation and coordination is highly valuable for maximizing the scientific impact of modern space science facilities, as well as for cost-sharing reasons. Indeed, all large space science missions, and most medium and small missions, are international, even if one country or space agency has a clear leadership role and bears most of the development costs. International coordination is a necessary aspect of future mission planning, but how that coordination is done remains debatable. I propose that the community's scientific vision is generally homogeneous enough to permit international coordination of decadal-scale strategic science goals. However, the timing and budget allocation/funding mechanisms of individual countries and/or space agencies are too disparate for effective long-term strategic portfolio planning via a single international process. Rather, I argue that coordinated space mission portfolio planning is a natural consequence of international collaboration on individual strategic missions. I review the process and outcomes of the U.S. 2010 decadal survey in astronomy & astrophysics from the perspective of a government official who helped craft the survey charter and transmitted guidance to the scientific community on behalf of a sponsoring agency (NASA), while continuing to manage the current portfolio that involved ongoing negotiations with other space agencies. I analyze the difficulties associated with projecting long-term budgets, obtaining realistic mission costs (including the additional cost burdens of international partnerships), and developing new (possibly transformational) technologies. Finally, I remark on the future role that privately funded space science missions can have in accomplishing international science community goals.

  8. Realistic weather simulations and forecast verification with COSMO-EULAG

    NASA Astrophysics Data System (ADS)

    Wójcik, Damian; Piotrowski, Zbigniew; Rosa, Bogdan; Ziemiański, Michał

    2015-04-01

    Research conducted at Polish Institute of Meteorology and Water Management, National Research Institute, in collaboration with Consortium for Small Scale Modeling (COSMO) resulted in the development of a new prototype model COSMO-EULAG. The dynamical core of the new model is based on anelastic set of equation and numerics adopted from the EULAG model. The core is coupled, with the 1st degree of accuracy, to the COSMO physical parameterizations involving turbulence, friction, radiation, moist processes and surface fluxes. The tool is capable to compute weather forecast in mountainous area for the horizontal resolutions ranging from 2.2 km to 0.1 km and with slopes reaching 82 degree of inclination. An employment of EULAG allows to profit from its desirable conservative properties and numerical robustness confirmed in number of benchmark tests and widely documented in scientific literature. In this study we show a realistic case study of Alpine summer convection simulated by COSMO-EULAG. It compares the convection-permitting realization of the flow using 2.2 km horizontal grid size, typical for contemporary very high resolution regional NWP forecast, with realization of LES type using grid size of 100 m. The study presents comparison of flow, cloud and precipitation structure together with the reference results of standard compressible COSMO Runge-Kutta model forecast in 2.2 km horizontal resolution. The case study results are supplemented by COSMO-EULAG forecast verification results for Alpine domain in 2.2 km horizontal resolution. Wind, temperature, cloud, humidity and precipitation scores are being presented. Verification period covers one summer month (June 2013) and one autumn month (November 2013). Verification is based on data collected by a network of approximately 200 stations (surface data verification) and 6 stations (upper-air verification) located in the Alps and vicinity.

  9. Realistic three-dimensional radiative transfer simulations of observed precipitation

    NASA Astrophysics Data System (ADS)

    Adams, I. S.; Bettenhausen, M. H.

    2013-12-01

    Remote sensing observations of precipitation typically utilize a number of instruments on various platforms. Ground validation campaigns incorporate ground-based and airborne measurements to characterize and study precipitating clouds, while the precipitation measurement constellation envisioned by the Global Precipitation Measurement (GPM) mission includes measurements from differing space-borne instruments. In addition to disparities such as frequency channel selection and bandwidth, measurement geometry and resolution differences between observing platforms result in inherent inconsistencies between data products. In order to harmonize measurements from multiple passive radiometers, a framework is required that addresses these differences. To accomplish this, we have implemented a flexible three-dimensional radiative transfer model. As its core, the radiative transfer model uses the Atmospheric Radiative Transfer Simulator (ARTS) version 2 to solve the radiative transfer equation in three dimensions using Monte Carlo integration. Gaseous absorption is computed with MonoRTM and formatted into look-up tables for rapid processing. Likewise, scattering properties are pre-computed using a number of publicly available codes, such as T-Matrix and DDSCAT. If necessary, a melting layer model can be applied to the input profiles. Gaussian antenna beams estimate the spatial resolutions of the passive measurements, and realistic bandpass characteristics can be included to properly account for the spectral response of the simulated instrument. This work presents three-dimensional simulations of WindSat brightness temperatures for an oceanic rain event sampled by the Tropical Rainfall Measuring Mission (TRMM) satellite. The 2B-31 combined Precipitation Radar / TRMM Microwave Imager (TMI) retrievals provide profiles that are the input to the radiative transfer model. TMI brightness temperatures are also simulated. Comparisons between monochromatic, pencil beam simulations and

  10. How sensitive is Melissa officinalis to realistic ozone concentrations?

    PubMed

    Döring, Anne Sarah; Pellegrini, Elisa; Campanella, Alessandra; Trivellini, Alice; Gennai, Clizia; Petersen, Maike; Nali, Cristina; Lorenzini, Giacomo

    2014-01-01

    Lemon balm (Melissa officinalis, L.; Lamiaceae) was exposed to realistic ozone (O3) dosages (80 ppb for 5 h), because high background levels of O3 are considered to be as harmful as episodic O3 regimes. Temporal alterations of different ecophysiological, biochemical and structural parameters were investigated in order to test if this species can be considered as an O3-bioindicator regarding changes in background concentrations. At the end of ozone exposure, the plants did not exhibit any visible foliar symptoms, as only at microscopic level a small number of dead cells were found. Photosynthetic processes, however, were significantly affected. During and after the treatment, ozone induced a reduction in CO2 fixation capacity (up to 52% after 12 h from the beginning of the treatment) due to mesophyllic limitations. Intercellular CO2 concentration significantly increased in comparison to controls (+90% at the end of the post-fumigation period). Furthermore impairment of carboxylation efficiency (-71% at the end of the post-fumigation period compared to controls in filtered air) and membrane damage in terms of integrity (as demonstrated by a significant rise in solute leakage) were observed. A regulatory adjustment of photosynthetic processes was highlighted during the post-fumigation period by the higher values of qNP and (1-q(P)) and therefore suggests a tendency to reduce the light energy used in photochemistry at the expense of the capacity to dissipate the excess as excitation energy. In addition, the chlorophyll a/b ratio and the de-epoxidation index increased, showing a rearrangement of the pigment composition of the photosynthetic apparatus and a marked activation of photoprotective mechanisms. PMID:24321873

  11. Acoustic simulation in realistic 3D virtual scenes

    NASA Astrophysics Data System (ADS)

    Gozard, Patrick; Le Goff, Alain; Naz, Pierre; Cathala, Thierry; Latger, Jean

    2003-09-01

    The simulation workshop CHORALE developed in collaboration with OKTAL SE company for the French MoD is used by government services and industrial companies for weapon system validation and qualification trials in the infrared domain. The main operational reference for CHORALE is the assessment of the infrared guidance system of the Storm Shadow missile French version, called Scalp. The use of CHORALE workshop is now extended to the acoustic domain. The main objective is the simulation of the detection of moving vehicles in realistic 3D virtual scenes. This article briefly describes the acoustic model in CHORALE. The 3D scene is described by a set of polygons. Each polygon is characterized by its acoustic resistivity or its complex impedance. Sound sources are associated with moving vehicles and are characterized by their spectra and directivities. A microphone sensor is defined by its position, its frequency band and its sensitivity. The purpose of the acoustic simulation is to calculate the incoming acoustic pressure on microphone sensors. CHORALE is based on a generic ray tracing kernel. This kernel possesses original capabilities: computation time is nearly independent on the scene complexity, especially the number of polygons, databases are enhanced with precise physical data, special mechanisms of antialiasing have been developed that enable to manage very accurate details. The ray tracer takes into account the wave geometrical divergence and the atmospheric transmission. The sound wave refraction is simulated and rays cast in the 3D scene are curved according to air temperature gradient. Finally, sound diffraction by edges (hill, wall,...) is also taken into account.

  12. Inter-Hemispherical Currents for Realistic Model of Ionospheric Conductivity

    NASA Astrophysics Data System (ADS)

    Lyatsky, S.; Khazanov, G. V.

    2013-12-01

    We present results of modeling of the global 3-D ionosphere-magnetosphere current system including in addition to the R1 and R2 field-aligned currents also inter-hemispherical currents. The inter-hemispherical currents flow between Northern and Southern conjugate ionospheres in case of a North-South asymmetry in ionospheric conductivity in two hemispheres. These currents link together the ionospheric currents in two hemispheres, so the currents observed in one hemisphere can provide us with information about currents in the opposite hemisphere, which is especially important when their magnitude can not be obtained from direct observation (e.g., in Antarctica). In this study, we investigate the generation of the inter-hemispherical currents for several distributions of ionospheric conductivity in two hemispheres including a simplified model of ionospheric conductivity, which is important for better understanding of the expected distribution and magnitude of these currents, and a more realistic model of ionospheric conductivity, which is observed during magnetospheric substorms, when the geometry of the inter-hemispherical currents is more complicated. Simulation results show that the inter-hemispherical currents during substorms could play a very significant role, and neglecting these currents does not allow obtaining the correct picture of 3-D magnetosphere-ionosphere current system. These currents are an important part of 3-D field-aligned current system, and they are especially strong during summer-winter months, when they are comparable in magnitude with the R2 currents (about ~0.5 MA). Inter-hemispherical currents map. Left panel is related to Northern hemisphere, right panel to Southern. R1 and R2 currents are not shown; their locations are indicated by the red and blue dashed circles, respectively. The inter-hemispherical currents appear inside the auroral zone in the region of conductivity gradient. The currents in both hemispheres are equal in magnitude and

  13. Secondary eyewall formation in high resolution, realistic hurricane simulations

    NASA Astrophysics Data System (ADS)

    Abarca Fuente, Sergio Federico

    This dissertation explores the dynamics of secondary eyewall formation (SEF) through the analysis of high resolution (1.33 km), realistic integrations of the National Center for Atmospheric Research Advanced Hurricane Weather Research and Forecasting model. Numerical simulations of Hurricanes Katrina and Rita (2005) and Igor (2010) are analyzed. The evolution of these storms was well captured by the model and each simulation exhibited a secondary eyewall (SE): a ring of deep convection separate from the primary eyewall that develops a strong acceleration of the tangential wind. This acceleration manifests itself as an abrupt radial expansion of the tangential wind field, sometimes followed by an independent wind maximum. The convective and wind structures of the SE in the simulations are shown to be consistent with observations. The results presented suggest that unbalanced dynamic processes are fundamental in SEF. It is shown that vortical hot towers (VHTs) are the convective structures that constitute the SE. Their collective effects account for, (a) the establishment of the convective maximum, (b) the weakening of the primary eyewall through competition for inflow (that may culminate with an eyewall replacement cycle) and (c) the wind acceleration, that may or may not express itself as an independent secondary maximum in the tangential wind field. It is shown that the establishment of the VHTs that constitute the SE can be the result of different processes: (1) the release of large amounts of buoyant energy at the radius of the SE; and (2) the accumulation of potential vorticity at the stagnation radius of vortex Rossby waves. In either case, the SE is characterized by a positive potential vorticity anomaly in the lower troposphere that is further enhanced by VHT activity and the axisymmetrization of their remnants, increasing the likelihood for future convection to occur.

  14. The buoyancy-driven ocean circulation with realistic bathymetry

    NASA Astrophysics Data System (ADS)

    Gjermundsen, Ada; LaCasce, Joseph H.; Denstad, Liv

    2015-04-01

    In contrast to the wind-driven ocean circulation, where the concept of a Sverdrup interior and western boundary currents is generally accepted, we lack a simple dynamical framework for rationalizing the buoyancy-driven circulation. Thus most of our intuition is based on numerical solutions, primarily in idealized basins (e.g. Huck et al., 1999; Park and Bryan, 2001). Here we examine numerical solutions of the global circulation with realistic bathymetry, driven solely by surface buoyancy forcing. Explicit wind forcing is excluded, although vertical mixing is retained. The model (the MITgcm) is run with a hybrid resolution scheme, to capture approximately the variation of the deformation radius. The character of the resulting flow is consistent in many ways with the observed ocean circulation. There is inflow to and sinking in the Nordic Seas, baroclinic western boundary currents and an overturning streamfunction which closely resembles those obtained in full GCMs and in observations. Furthermore, the solutions share many features with solutions obtained with a linear analytical model (Pedlosky, 1969; LaCasce, 2004), suggesting the latter may be conceptually useful, despite lacking bathymetry. We discuss these points, as well as implications for the climate system in general. References: Pedlosky, J. (1969). Linear theory of the circulation of a stratified ocean. Journal of Fluid Mechanics, 35, 185-205. Huck, T., A. J. Weaver and A. Colin de Verdière (1999). On the influence of the parameterization of lateral boundary layers on the thermohaline circulation in coarse-resolution ocean models. Journal of Marine Research, 57(3), 387-426. Park, Y. G. and K. Bryan (2001). Comparison of thermally driven circulations from a depth-coordinate model and an isopycnal-layer model. Part II: The difference and structure of the circulations. Journal of Physical Oceanography, 31(9), 2612-2624. LaCasce, J. H. (2004). Diffusivity and viscosity dependence in the linear thermocline

  15. Validation of a dose warping algorithm using clinically realistic scenarios

    PubMed Central

    Dehghani, H; Green, S; Webster, G J

    2015-01-01

    Objective: Dose warping following deformable image registration (DIR) has been proposed for interfractional dose accumulation. Robust evaluation workflows are vital to clinically implement such procedures. This study demonstrates such a workflow and quantifies the accuracy of a commercial DIR algorithm for this purpose under clinically realistic scenarios. Methods: 12 head and neck (H&N) patient data sets were used for this retrospective study. For each case, four clinically relevant anatomical changes have been manually generated. Dose distributions were then calculated on each artificially deformed image and warped back to the original anatomy following DIR by a commercial algorithm. Spatial registration was evaluated by quantitative comparison of the original and warped structure sets, using conformity index and mean distance to conformity (MDC) metrics. Dosimetric evaluation was performed by quantitative comparison of the dose–volume histograms generated for the calculated and warped dose distributions, which should be identical for the ideal “perfect” registration of mass-conserving deformations. Results: Spatial registration of the artificially deformed image back to the planning CT was accurate (MDC range of 1–2 voxels or 1.2–2.4 mm). Dosimetric discrepancies introduced by the DIR were low (0.02 ± 0.03 Gy per fraction in clinically relevant dose metrics) with no statistically significant difference found (Wilcoxon test, 0.6 ≥ p ≥ 0.2). Conclusion: The reliability of CT-to-CT DIR-based dose warping and image registration was demonstrated for a commercial algorithm with H&N patient data. Advances in knowledge: This study demonstrates a workflow for validation of dose warping following DIR that could assist physicists and physicians in quantifying the uncertainties associated with dose accumulation in clinical scenarios. PMID:25791569

  16. Confined disordered strictly jammed binary sphere packings

    NASA Astrophysics Data System (ADS)

    Chen, D.; Torquato, S.

    2015-12-01

    Disordered jammed packings under confinement have received considerably less attention than their bulk counterparts and yet arise in a variety of practical situations. In this work, we study binary sphere packings that are confined between two parallel hard planes and generalize the Torquato-Jiao (TJ) sequential linear programming algorithm [Phys. Rev. E 82, 061302 (2010), 10.1103/PhysRevE.82.061302] to obtain putative maximally random jammed (MRJ) packings that are exactly isostatic with high fidelity over a large range of plane separation distances H , small to large sphere radius ratio α , and small sphere relative concentration x . We find that packing characteristics can be substantially different from their bulk analogs, which is due to what we term "confinement frustration." Rattlers in confined packings are generally more prevalent than those in their bulk counterparts. We observe that packing fraction, rattler fraction, and degree of disorder of MRJ packings generally increase with H , though exceptions exist. Discontinuities in the packing characteristics as H varies in the vicinity of certain values of H are due to associated discontinuous transitions between different jammed states. When the plane separation distance is on the order of two large-sphere diameters or less, the packings exhibit salient two-dimensional features; when the plane separation distance exceeds about 30 large-sphere diameters, the packings approach three-dimensional bulk packings. As the size contrast increases (as α decreases), the rattler fraction dramatically increases due to what we call "size-disparity" frustration. We find that at intermediate α and when x is about 0.5 (50-50 mixture), the disorder of packings is maximized, as measured by an order metric ψ that is based on the number density fluctuations in the direction perpendicular to the hard walls. We also apply the local volume-fraction variance στ2(R ) to characterize confined packings and find that these

  17. Foreword: In situ gas surface interactions: approaching realistic conditions

    NASA Astrophysics Data System (ADS)

    Lundgren, Edvin; Over, Herbert

    2008-03-01

    This special issue is devoted to the application of in situ surface-sensitive techniques in the elucidation of catalysed reactions at (model) catalyst surfaces. Both reaction intermediates and the nature of the catalytically active phase are the targets of these investigations. In situ surface science techniques are also used to study the interaction of water with surfaces under realistic conditions. Since 80% of all technical chemicals are manufactured by utilizing (heterogeneous) catalysis, scientific understanding and technological development of catalysis are of central practical importance in modern society [1]. Heterogeneously catalysed reactions take place at the gas/solid interface. Therefore one of the major topics in surface chemistry and physics is closely related to heterogeneous catalysis, with the aim of developing novel catalysts and to improve catalysts' performances on the basis of atomic scale based knowledge. Despite the economical and environmental rewards—if such a goal is achieved—and despite 40 years of intensive research, practical catalysis is still safely in a black box: the reactivity and selectivity of a catalyst are commercially still optimized on a trial and error basis, applying the high throughput screening approach. The reason for this discrepancy between ambition and reality lies in the inherent complexity of the catalytic system, consisting of the working catalyst and the interaction of the catalyst with the reactant mixture. Practical (solid) catalysts consist of metal or oxide nanoparticles which are dispersed and stabilized on a support and which may be promoted by means of additives. These particles catalyse a reaction in pressures as high as 100 bar. Practical catalysis is in general considered to be far too complex for gaining atomic-scale understanding of the mechanism of the catalysed reaction of an industrial catalyst during its operation. Therefore it has been necessary to introduce idealization and simplification of

  18. Righteous realists: Perceptions of American power and responsibility in the nuclear age

    SciTech Connect

    Rosenthal, J.H.

    1988-01-01

    This is a study of the moral and ethical dimensions of political realism in post-World War II America, especially in relation to realist thought on nuclear weapons issues. Emphasis is placed on evolving notions of power and responsibility as they form the basis for a realist philosophy of power in the nuclear age. It is argued that the realists developed a concept of responsible power which was a hybrid of traditional American ideals and European Realpolitik. Included are chapters on the personal and intellectual background of five noteworthy realists, the realist position on some basic dilemmas in political ethics, the problem of usable and unusable force, the realists' view on deterrence and arms control, the question of democracy versus guardianship, and the realists as cultural critics. This study highlights the coherence of realist thought while pointing out the paradoxes upon which it is based. It situates realism in its historical context and reveals realism's relationship to explicit political and cultural values. It concludes that at their core, the realists were moralists; and realism was the entity through which they reconciled morality and power.

  19. The polymer physics of single DNA confined in nanochannels.

    PubMed

    Dai, Liang; Renner, C Benjamin; Doyle, Patrick S

    2016-06-01

    In recent years, applications and experimental studies of DNA in nanochannels have stimulated the investigation of the polymer physics of DNA in confinement. Recent advances in the physics of confined polymers, using DNA as a model polymer, have moved beyond the classic Odijk theory for the strong confinement, and the classic blob theory for the weak confinement. In this review, we present the current understanding of the behaviors of confined polymers while briefly reviewing classic theories. Three aspects of confined DNA are presented: static, dynamic, and topological properties. The relevant simulation methods are also summarized. In addition, comparisons of confined DNA with DNA under tension and DNA in semidilute solution are made to emphasize universal behaviors. Finally, an outlook of the possible future research for confined DNA is given. PMID:26782150

  20. System and method of operating toroidal magnetic confinement devices

    DOEpatents

    Chance, M.S.; Jardin, S.C.; Stix, T.H.; Grimm, R.C.; Manickam, J.; Okabayashi, M.

    1984-08-30

    This invention pertains to methods and arrangements for attaining high beta values in plasma confinement devices. More specifically, this invention pertains to methods for accessing the second stability region of operation in toroidal magnetic confinement devices.

  1. Institutional games played by confined juveniles.

    PubMed

    Bartollas, C; Sieverdes, C M

    1983-01-01

    This study examined the games played by 561 juvenile offenders confined in six coeducational correctional facilities in one state. The types of games these residents used against staff and peers within the confines of the institution varied considerably. The study documented nineteen games used by males and females, twelve to deal with staff and seven to deal with peers. The games were defined as therapeutic games, material games, psychological games, and physical games. Peer-oriented games included attention-seeking activities and a variety of dominance games. Additionally, these games were described and tabulated according to the sex and race of the residents. The conclusion was that game-playing behavior was no less frequent in coeducational institutions than it was in single-sex institutions. PMID:6650271

  2. Spiral precipitation patterns in confined chemical gardens

    PubMed Central

    Haudin, Florence; Brau, Fabian; De Wit, A.

    2014-01-01

    Chemical gardens are mineral aggregates that grow in three dimensions with plant-like forms and share properties with self-assembled structures like nanoscale tubes, brinicles, or chimneys at hydrothermal vents. The analysis of their shapes remains a challenge, as their growth is influenced by osmosis, buoyancy, and reaction–diffusion processes. Here we show that chemical gardens grown by injection of one reactant into the other in confined conditions feature a wealth of new patterns including spirals, flowers, and filaments. The confinement decreases the influence of buoyancy, reduces the spatial degrees of freedom, and allows analysis of the patterns by tools classically used to analyze 2D patterns. Injection moreover allows the study in controlled conditions of the effects of variable concentrations on the selected morphology. We illustrate these innovative aspects by characterizing quantitatively, with a simple geometrical model, a new class of self-similar logarithmic spirals observed in a large zone of the parameter space. PMID:25385581

  3. Nonlinear adhesion dynamics of confined lipid membranes

    NASA Astrophysics Data System (ADS)

    To, Tung; Le Goff, Thomas; Pierre-Louis, Olivier

    Lipid membranes, which are ubiquitous objects in biological environments are often confined. For example, they can be sandwiched between a substrate and the cytoskeleton between cell adhesion, or between other membranes in stacks, or in the Golgi apparatus. We present a study of the nonlinear dynamics of membranes in a model system, where the membrane is confined between two flat walls. The dynamics derived from the lubrication approximation is highly nonlinear and nonlocal. The solution of this model in one dimension exhibits frozen states due to oscillatory interactions between membranes caused by the bending rigidity. We develope a kink model for these phenomena based on the historical work of Kawasaki and Otha. In two dimensions, the dynamics is more complex, and depends strongly on the amount of excess area in the system. We discuss the relevance of our findings for experiments on model membranes, and for biological systems. Supported by the grand ANR Biolub.

  4. Pressure-confined Lyman-alpha clouds

    NASA Technical Reports Server (NTRS)

    Baron, E.; Carswell, R. F.; Hogan, C. J.; Weymann, R. J.

    1989-01-01

    Results are presented of numerical models of pressure-confined spherical gas clouds which produce absorption resembling the low to intermediate atomic column density lines found in high-redshift QSO spectra. One-dimensional hydrodynamical models including electron conduction are described, and the rate equations are solved to find ionization and excitation states. Results are presented for both static and adiabatically expanding confining media covering a range of initial pressures. It is found that Ly-alpha lines are very similar over a wide range of conditions and that the most promising diagnostic of pressure is to compare the column density in H I to that in He I and He II. No single-pressure model can explain the wide range of observed H I column densities.

  5. Confinement of Fractional Quantum Hall States

    NASA Astrophysics Data System (ADS)

    Willett, Robert; Manfra, Michael; West, Ken; Pfeiffer, Loren

    2008-03-01

    Confinement of small-gapped fractional quantum Hall states facilitates quasiparticle manipulation and is an important step towards quasiparticle interference measurements. Demonstrated here is conduction through top gate defined, narrow channels in high density, ultra-high mobility heterostructures. Transport evidence for the persistence of a correlated state at filling fraction 5/3 is shown in channels of 2μm length but gated to near 0.3μm in width. The methods employed to achieve this confinement hold promise for interference devices proposed for studying potential non-Abelian statistics at filling fraction 5/2. R.L. Willett, M.J. Manfra, L.N. Pfeiffer, K.W. West, Appl. Phys. Lett. 91, 052105 (2007).

  6. Spontaneous circulation of confined active suspensions.

    PubMed

    Woodhouse, Francis G; Goldstein, Raymond E

    2012-10-19

    Many active fluid systems encountered in biology are set in total geometric confinement. Cytoplasmic streaming in plant cells is a prominent and ubiquitous example, in which cargo-carrying molecular motors move along polymer filaments and generate coherent cell-scale flow. When filaments are not fixed to the cell periphery, a situation found both in vivo and in vitro, we observe that the basic dynamics of streaming are closely related to those of a nonmotile stresslet suspension. Under this model, it is demonstrated that confinement makes possible a stable circulating state; a linear stability analysis reveals an activity threshold for spontaneous autocirculation. Numerical analysis of the longtime behavior reveals a phenomenon akin to defect separation in nematic liquid crystals and a high-activity bifurcation to an oscillatory regime. PMID:23215137

  7. Spiral precipitation patterns in confined chemical gardens.

    PubMed

    Haudin, Florence; Cartwright, Julyan H E; Brau, Fabian; De Wit, A

    2014-12-01

    Chemical gardens are mineral aggregates that grow in three dimensions with plant-like forms and share properties with self-assembled structures like nanoscale tubes, brinicles, or chimneys at hydrothermal vents. The analysis of their shapes remains a challenge, as their growth is influenced by osmosis, buoyancy, and reaction-diffusion processes. Here we show that chemical gardens grown by injection of one reactant into the other in confined conditions feature a wealth of new patterns including spirals, flowers, and filaments. The confinement decreases the influence of buoyancy, reduces the spatial degrees of freedom, and allows analysis of the patterns by tools classically used to analyze 2D patterns. Injection moreover allows the study in controlled conditions of the effects of variable concentrations on the selected morphology. We illustrate these innovative aspects by characterizing quantitatively, with a simple geometrical model, a new class of self-similar logarithmic spirals observed in a large zone of the parameter space. PMID:25385581

  8. Charge transport in confined ionic liquids

    NASA Astrophysics Data System (ADS)

    Sangoro, Joshua; Iacob, Ciprian; Kipnusu, Wycliffe; Kremer, Friedrich

    2011-03-01

    Charge transport and glassy dynamics in neat and polymerized ionic liquids confined in nanoporous silica are investigated in a wide frequency and temperature ranges by a combination of Broadband Dielectric Spectroscopy and Pulsed Field Gradient Nuclear Magnetic Resonance (PFG NMR). By applying the Einstein-Smoluchowski relations to the dielectric spectra, diffusion coefficients are obtained in quantitative agreement with independent PFG NMR. The impact of geometrical confinement as well as the pore wall-ionic liquid interactions on the overall ionic mobility is explored for diverse categories of ionic liquids. The results are discussed within the framework of dynamic glass transition assisted charge transport in ionic liquids. Financial support from the Deutsche Forschungsgemeinschaft under the DFG SPP 1191 Priority Program on Ionic Liquids is gratefully acknowledged.

  9. Size scaling of microtubule asters in confinement

    NASA Astrophysics Data System (ADS)

    Pelletier, James; Field, Christine; Krutkramelis, Kaspars; Fakhri, Nikta; Oakey, John; Gatlin, Jay; Mitchison, Timothy

    Microtubule asters are radial arrays of microtubules (MTs) nucleated around organizing centers (MTOCs). Across a wide range of cell types and sizes, aster positioning influences cellular organization. To investigate aster size and positioning, we reconstituted dynamic asters in Xenopus cytoplasmic extract, confined in fluorous oil microfluidic emulsions. In large droplets, we observed centering of MTOCs. In small droplets, we observed a breakdown in natural positioning, with MTOCs at the droplet edge and buckled or bundled MTs along the interface. In different systems, asters are positioned by different forces, such as pushing due to MT polymerization, or pulling due to bulk or cortical dynein. To estimate different contributions to aster positioning, we biochemically perturbed dynactin function, or MT or actin polymerization. We used carbon nanotubes to measure molecular motions and forces in asters. These experimental results inform quantitative biophysical models of aster size and positioning in confinement. JFP was supported by a Fannie and John Hertz Graduate Fellowship.

  10. Spontaneous Circulation of Confined Active Suspensions

    NASA Astrophysics Data System (ADS)

    Woodhouse, Francis G.; Goldstein, Raymond E.

    2012-10-01

    Many active fluid systems encountered in biology are set in total geometric confinement. Cytoplasmic streaming in plant cells is a prominent and ubiquitous example, in which cargo-carrying molecular motors move along polymer filaments and generate coherent cell-scale flow. When filaments are not fixed to the cell periphery, a situation found both in vivo and in vitro, we observe that the basic dynamics of streaming are closely related to those of a nonmotile stresslet suspension. Under this model, it is demonstrated that confinement makes possible a stable circulating state; a linear stability analysis reveals an activity threshold for spontaneous autocirculation. Numerical analysis of the longtime behavior reveals a phenomenon akin to defect separation in nematic liquid crystals and a high-activity bifurcation to an oscillatory regime.

  11. Confinement and stability of a Crystalline Beam

    SciTech Connect

    Ruggiero, A.G.

    1993-05-10

    This technical report defines and describes a Crystalline Beam. This is an ordered state of matter made of electrically charged ions which are moving together in a storage ring with very high density and small velocity spread. In particular, the paper analyses the requirements for the confinement and the stability of the Beam. It is demonstrated that a storage ring made of one circular weak-focusing magnet, similar to a Betatron, is the most suitable for the confinement and stability of the Crystalline Beam. The disruptive effects of drift insertions have also been investigated. Requirements on final densities and velocity spreads are also calculated and reported. A matrix formalism is developed for the design of the storage ring. The important issue of the disruption caused by the curvature of the closed trajectory is not here discussed; it is the subject of a subsequent paper.

  12. Inertial-confinement fusion with lasers

    NASA Astrophysics Data System (ADS)

    Betti, R.; Hurricane, O. A.

    2016-05-01

    The quest for controlled fusion energy has been ongoing for over a half century. The demonstration of ignition and energy gain from thermonuclear fuels in the laboratory has been a major goal of fusion research for decades. Thermonuclear ignition is widely considered a milestone in the development of fusion energy, as well as a major scientific achievement with important applications in national security and basic sciences. The US is arguably the world leader in the inertial confinement approach to fusion and has invested in large facilities to pursue it, with the objective of establishing the science related to the safety and reliability of the stockpile of nuclear weapons. Although significant progress has been made in recent years, major challenges still remain in the quest for thermonuclear ignition via laser fusion. Here, we review the current state of the art in inertial confinement fusion research and describe the underlying physical principles.

  13. Yukawa particles in a confining potential

    SciTech Connect

    Girotto, Matheus Levin, Yan; Santos, Alexandre P. dos; Colla, Thiago

    2014-07-07

    We study the density distribution of repulsive Yukawa particles confined by an external potential. In the weak coupling limit, we show that the mean-field theory is able to accurately account for the particle distribution. In the strong coupling limit, the correlations between the particles become important and the mean-field theory fails. For strongly correlated systems, we construct a density functional theory which provides an excellent description of the particle distribution, without any adjustable parameters.

  14. Effective string description of confining flux tubes

    NASA Astrophysics Data System (ADS)

    Brandt, Bastian B.; Meineri, Marco

    2016-08-01

    We review the current knowledge about the theoretical foundations of the effective string theory for confining flux tubes and the comparison of the predictions to pure gauge lattice data. A concise presentation of the effective string theory is provided, incorporating recent developments. We summarize the predictions for the spectrum and the profile/width of the flux tube and their comparison to lattice data. The review closes with a short summary of open questions for future research.

  15. Confinement scaling and ignition in tokamaks

    SciTech Connect

    Perkins, F.W.; Sun, Y.C.

    1985-10-01

    A drift wave turbulence model is used to compute the scaling and magnitude of central electron temperature and confinement time of tokamak plasmas. The results are in accord with experiment. Application to ignition experiments shows that high density (1 to 2) . 10/sup 15/ cm/sup -3/, high field, B/sub T/ > 10 T, but low temperature T approx. 6 keV constitute the optimum path to ignition.

  16. [Ethics and solitary confinement in psychiatry].

    PubMed

    Andrieu, Jean-Pierre

    2014-01-01

    The decision to treat a patient in solitary confinement in psychiatry does not follow any protocol and is not made on a case-by-case basis. Team deliberation opens discussion and enables the group as a whole to take responsibility for clarifying what is to be supported by the team and implemented by the carer during treatment. When presented with complex situations, uncertainty can be a force when it calls upon an ethical dilemma. PMID:25335218

  17. Neoclassical transport in enhanced confinement toroidal plasmas

    SciTech Connect

    Lin, Z.; Tang, W.M.; Lee, W.W.

    1996-11-01

    It has recently been reported that ion thermal transport levels in enhanced confinement tokamak plasmas have been observed to fall below the irreducible minimum level predicted by standard neoclassical theory. This apparent contradiction is resolved in the present analysis by relaxing the basic neoclassical assumption that the ions orbital excursions are much smaller than the local toroidal minor radius and the equilibrium scale lengths of the system.

  18. LDV Measurement of Confined Parallel Jet Mixing

    SciTech Connect

    R.F. Kunz; S.W. D'Amico; P.F. Vassallo; M.A. Zaccaria

    2001-01-31

    Laser Doppler Velocimetry (LDV) measurements were taken in a confinement, bounded by two parallel walls, into which issues a row of parallel jets. Two-component measurements were taken of two mean velocity components and three Reynolds stress components. As observed in isolated three dimensional wall bounded jets, the transverse diffusion of the jets is quite large. The data indicate that this rapid mixing process is due to strong secondary flows, transport of large inlet intensities and Reynolds stress anisotropy effects.

  19. Freezing of fluids confined between mica surfaces.

    PubMed

    Ayappa, K G; Mishra, Ratan K

    2007-12-27

    Using grand ensemble simulations, we show that octamethyl-cyclo-tetra-siloxane (OMCTS) confined between two mica surfaces can form a variety of frozen phases which undergo solid-solid transitions as a function of the separation between the surfaces. For atomically smooth mica surfaces, the following sequence of transitions 1[triangle up] --> 1[triangle up]b --> 2B --> 2 square --> 2[triangle up] are observed in the one- and two-layered regimes, where n[triangle up], n[square], and nB denote triangular, square, and buckled phases, respectively, with the prefix n denoting the number of confined layers. The presence of potassium on mica is seen to have a strong influence on the degree of order induced in the fluid. The sequence of solid-solid transitions that occurs with the smooth mica surface is no longer observed. When equilibrated with a state point near the liquid-solid transition, a counterintuitive freezing scenario is observed in the presence of potassium. Potassium disrupts in-plane ordering in the fluid in contact with the mica surface, and freezing is observed only in the inner confined layers. The largest mica separations at which frozen phases were observed ranged from separations that could accommodate six to seven fluid layers. The extent of freezing and the square-to-triangular lattice transition was found to be sensitive to the presence of potassium as well as the thermodynamic conditions of the bulk fluid. The implications of our results on interpretation of surface force experiments as well as the generic phase behavior of confined soft spheres is discussed. PMID:18092763

  20. Waveforms Measured in Confined Thermobaric Explosion

    SciTech Connect

    Reichenbach, H; Neuwald, P; Kuhl, A L

    2007-05-04

    Experiments with 1.5-g Shock-Dispersed-Fuel (SDF) charges have been conducted in six different chambers. Both flake Aluminum and TNT were used as the fuel. Static pressure gauges on the chamber wall were the main diagnostic. Waveforms for explosions in air were significantly larger than those in nitrogen - thereby demonstrating a strong thermobaric (combustion) effect. This effect increases as the confinement volume decreases and the mixture richness approaches 1.

  1. Realistic models of pion-exchange three-nucleon interactions

    SciTech Connect

    Pieper, Steven C.; Pandharipande, V. R.; Wiringa, R. B.; Carlson, J.

    2001-07-01

    We present realistic models of pion-exchange three-nucleon interactions obtained by fitting the energies of all the 17 bound or narrow states of 3{<=}A{<=}8 nucleons, calculated with less than 2% error using the Green's function Monte Carlo method. The models contain two-pion-exchange terms due to {pi}N scattering in S and P waves, three-pion-exchange terms due to ring diagrams with one {Delta} in the intermediate states, and a phenomenological repulsive term to take into account relativistic effects, the suppression of the two-pion-exchange two-nucleon interaction by the third nucleon, and other effects. The models have five parameters, consisting of the strength of the four interactions and the short-range cutoff. The 17 fitted energies are insufficient to determine all of them uniquely. We consider five models, each having three adjustable parameters and assumed values for the other two. They reproduce the observed energies with an rms error <1% when used together with the Argonne v{sub 18} two-nucleon interaction. In one of the models the {pi}N S-wave scattering interaction is set to zero; in all others it is assumed to have the strength suggested by chiral effective-field theory. One of the models also assumes that the {pi}N P-wave scattering interaction has the strength suggested by effective-field theories, and the cutoff is adjusted to fit the data. In all other models the cutoff is taken to be the same as in the v{sub 18} interaction. The effect of relativistic boost correction to the two-nucleon interaction on the strength of the repulsive three-nucleon interaction is estimated. Many calculated properties of A{<=}8 nuclei, including radii, magnetic dipole, and electric quadrupole moments, isobaric analog energy differences, etc., are tabulated. Results obtained with only Argonne v{sub 8}' and v{sub 18} interactions are also reported. In addition, we present results for seven- and eight-body neutron drops in external potential wells.

  2. Optimizing Wind And Hydropower Generation Within Realistic Reservoir Operating Policy

    NASA Astrophysics Data System (ADS)

    Magee, T. M.; Clement, M. A.; Zagona, E. A.

    2012-12-01

    Previous studies have evaluated the benefits of utilizing the flexibility of hydropower systems to balance the variability and uncertainty of wind generation. However, previous hydropower and wind coordination studies have simplified non-power constraints on reservoir systems. For example, some studies have only included hydropower constraints on minimum and maximum storage volumes and minimum and maximum plant discharges. The methodology presented here utilizes the pre-emptive linear goal programming optimization solver in RiverWare to model hydropower operations with a set of prioritized policy constraints and objectives based on realistic policies that govern the operation of actual hydropower systems, including licensing constraints, environmental constraints, water management and power objectives. This approach accounts for the fact that not all policy constraints are of equal importance. For example target environmental flow levels may not be satisfied if it would require violating license minimum or maximum storages (pool elevations), but environmental flow constraints will be satisfied before optimizing power generation. Additionally, this work not only models the economic value of energy from the combined hydropower and wind system, it also captures the economic value of ancillary services provided by the hydropower resources. It is recognized that the increased variability and uncertainty inherent with increased wind penetration levels requires an increase in ancillary services. In regions with liberalized markets for ancillary services, a significant portion of hydropower revenue can result from providing ancillary services. Thus, ancillary services should be accounted for when determining the total value of a hydropower system integrated with wind generation. This research shows that the end value of integrated hydropower and wind generation is dependent on a number of factors that can vary by location. Wind factors include wind penetration level

  3. Boundary conditions towards realistic simulation of jet engine noise

    NASA Astrophysics Data System (ADS)

    Dhamankar, Nitin S.

    Strict noise regulations at major airports and increasing environmental concerns have made prediction and attenuation of jet noise an active research topic. Large eddy simulation coupled with computational aeroacoustics has the potential to be a significant research tool for this problem. With the emergence of petascale computer clusters, it is now computationally feasible to include the nozzle geometry in jet noise simulations. In high Reynolds number experiments on jet noise, the turbulent boundary layer on the inner surface of the nozzle separates into a turbulent free shear layer. Inclusion of a nozzle with turbulent inlet conditions is necessary to simulate this phenomenon realistically. This will allow a reasonable comparison of numerically computed noise levels with the experimental results. Two viscous wall boundary conditions are implemented for modeling the nozzle walls. A characteristic-based approach is compared with a computationally cheaper, extrapolation-based formulation. In viscous flow over a circular cylinder under two different regimes, excellent agreement is observed between the results of the two approaches. The results agree reasonably well with reference experimental and numerical results. Both the boundary conditions are thus found to be appropriate, the extrapolation-based formulation having an edge with its low cost. This is followed with the crucial step of generation of a turbulent boundary layer inside the nozzle. A digital filter-based turbulent inflow condition, extended in a new way to non-uniform curvilinear grids is implemented to achieve this. A zero pressure gradient flat plate turbulent boundary layer is simulated at a high Reynolds number to show that the method is capable of producing sustained turbulence. The length of the adjustment region necessary for synthetic inlet turbulence to recover from modeling errors is estimated. A low Reynolds number jet simulation including a round nozzle geometry is performed and the method

  4. Interpreting Observations of Galaxies through Simulations with Realistic ISM Physics

    NASA Astrophysics Data System (ADS)

    Jonsson, Patrik

    interstellar medium on scales of tens of parsecs using realistic physics. These simulations will then be processed with our dust radiation- transfer code Sunrise, generating ``simulated observations'' in the form of images, spectra, and integral field unit-style data cubes including kinematics, directly testing whether the included physical processes are consistent with observed samples of galaxies. The proposed research is well aligned with the goals of the NASA astrophysics theory program, as it is fundamentally oriented towards facilitating the interpretation of observations from NASA facilities such as the Hubble, Galex, Spitzer, and the upcoming James Webb Space Telescope, as well as other ground- and space-based facilities.

  5. Realistically Predicting Saturation-Excess Runoff With El-SWAT

    NASA Astrophysics Data System (ADS)

    Hoang, L.; Schneiderman, E. M.; Steenhuis, T. S.; Moore, K. E.; Owens, E. M.

    2015-12-01

    agreement with field observations. With the incorporation of topography characteristics and the addition of the perched aquifer, El-SWAT gives a realistic representation of hydrological processes and will lead to better water quality models where the source of the surface runoff matters.

  6. Fast ion JET diagnostics: confinement and losses

    SciTech Connect

    Kiptily, V. G.; Pinches, S. D.; Sharapov, S. E.; Syme, D. B.; Cecconello, M.; Darrow, D.; Hill, K.; Goloborod'ko, V.; Yavorskij, V.; Johnson, T.; Murari, A.; Reich, M.; Gorini, G.; Zoita, V.

    2008-03-12

    A study of magnetically confined fast ions in tokamaks plays an important role in burning plasma research. To reach ignition and steady burning of a reactor plasma an adequate confinement of energetic ions produced by NBI heating, accelerated with ICRF and born in fusion reactions is essential to provide efficient heating of the bulk plasma. Thus, investigation of the fast ion behaviour is an immediate task for present-day large machines, such as JET, in order to understand the main mechanisms of slowing down, redistribution and losses, and to develop optimal plasma scenarios. Today's JET has an enhanced suite of fast ion diagnostics both of confined and lost ions that enable to significantly contribute to this important area of research. Fast ion populations of p, d, t, {sup 3}He and {sup 4}He, made with ICRF, NBI, and fusion reactions have been investigated in experiments on JET with sophisticated diagnostics in conventional and shear-reversed plasmas, exploring a wide range of effects. This paper will introduce to the JET fast-ion diagnostic techniques and will give an overview of recent observations. A synergy of the unique diagnostic set was utilised in JET, and studies of the response of fast ions to MHD modes (e.g. tornado modes, sawtooth crashes), fast {sup 3}He-ions behaviour in shear-reversed plasmas are impressive examples of that. Some results on fast ion losses in JET experiments with various levels of the toroidal field ripple will be demonstrated.

  7. Active nematics confined within a shell

    NASA Astrophysics Data System (ADS)

    Zhang, Rui; Zhou, Ye; Rahimi, Mohammad; de Pablo, Juan; dePablo Team

    Active fluids exhibit many striking flow patterns when confined within complex geometries. For example, recent work has demonstrated that when a thin film of extensile microtubules is confined within a vesicle, the four + 1 / 2 defects periodically oscillate between a tetrahedral and a planar configuration (Keber, et al. Science (2014). Here we employ hybrid lattice Boltzmann simulations to study the dynamics of active nematics confined between two concentric spherical surfaces. We find that in both extensile and contractile systems, the four defects are coupled with noticeable macroscopic velocities and they move along their symmetry axes, eventhough in different patterns. We observe that in extensile systems with moderate activity, defects repel each other due to elastic forces, and their collective motion leads to the same patterned dynamics as observed in the above experiment. We further show that this periodic dynamics is accompanied by oscillations of the defect velocity, system's elastic energy, and the emergence and annihilation of vortices. We also observe that with stronger activity, the extensile system evolves to chaos. In contrast, the contractile system remains passive for the entire activity range, with defects being attracted to each other in pairs.

  8. Confined Water as Model of Supercooled Water.

    PubMed

    Cerveny, Silvina; Mallamace, Francesco; Swenson, Jan; Vogel, Michael; Xu, Limei

    2016-07-13

    Water in confined geometries has obvious relevance in biology, geology, and other areas where the material properties are strongly dependent on the amount and behavior of water in these types of materials. Another reason to restrict the size of water domains by different types of geometrical confinements has been the possibility to study the structural and dynamical behavior of water in the deeply supercooled regime (e.g., 150-230 K at ambient pressure), where bulk water immediately crystallizes to ice. In this paper we give a short review of studies with this particular goal. However, from these studies it is also clear that the interpretations of the experimental data are far from evident. Therefore, we present three main interpretations to explain the experimental data, and we discuss their advantages and disadvantages. Unfortunately, none of the proposed scenarios is able to predict all the observations for supercooled and glassy bulk water, indicating that either the structural and dynamical alterations of confined water are too severe to make predictions for bulk water or the differences in how the studied water has been prepared (applied cooling rate, resulting density of the water, etc.) are too large for direct and quantitative comparisons. PMID:26940794

  9. Counterpropagating Rossby waves in confined plane wakes

    NASA Astrophysics Data System (ADS)

    Biancofiore, L.; Gallaire, F.

    2012-07-01

    In the present work, we revisit the temporal and the spatio-temporal stability of confined plane wakes under the perspective of the counterpropagating Rossby waves (CRWs). Within the context of broken line velocity profiles, each vorticity discontinuity can be associated to a counterpropagating Rossby wave. In the case of a wake modeled by a broken line profile, the interaction of two CRWs is shown to originate in a shear instability. Following this description, we first recover the stability results obtained by Juniper [J. Fluid Mech. 590, 163-185 (2007)], 10.1017/S0022112007007975 and Biancofiore and Gallaire [Phys. Fluids 23, 034103 (2011)], 10.1063/1.3554764 by means of the classical normal mode analysis. In this manner, we propose an explanation of the stabilizing influence of the confinement on the temporal stability properties. The CRW description further allows us to propose a new interpretation of the counterintuitive spatio-temporal destabilization in wake flows at moderate confinement noticed by Juniper [J. Fluid Mech. 565, 171-195 (2006)], 10.1017/S0022112006001558: it is well predicted by the mean group velocity of the uncoupled CRWs.

  10. Chemical reactions confined within carbon nanotubes.

    PubMed

    Miners, Scott A; Rance, Graham A; Khlobystov, Andrei N

    2016-08-22

    In this critical review, we survey the wide range of chemical reactions that have been confined within carbon nanotubes, particularly emphasising how the pairwise interactions between the catalysts, reactants, transition states and products of a particular molecular transformation with the host nanotube can be used to control the yields and distributions of products of chemical reactions. We demonstrate that nanoscale confinement within carbon nanotubes enables the control of catalyst activity, morphology and stability, influences the local concentration of reactants and products thus affecting equilibria, rates and selectivity, pre-arranges the reactants for desired reactions and alters the relative stability of isomeric products. We critically evaluate the relative advantages and disadvantages of the confinement of chemical reactions inside carbon nanotubes from a chemical perspective and describe how further developments in the controlled synthesis of carbon nanotubes and the incorporation of multifunctionality are essential for the development of this ever-expanding field, ultimately leading to the effective control of the pathways of chemical reactions through the rational design of multi-functional carbon nanoreactors. PMID:27301444

  11. Density Shock Waves in Confined Microswimmers

    NASA Astrophysics Data System (ADS)

    Tsang, Alan Cheng Hou; Kanso, Eva

    2016-01-01

    Motile and driven particles confined in microfluidic channels exhibit interesting emergent behavior, from propagating density bands to density shock waves. A deeper understanding of the physical mechanisms responsible for these emergent structures is relevant to a number of physical and biomedical applications. Here, we study the formation of density shock waves in the context of an idealized model of microswimmers confined in a narrow channel and subject to a uniform external flow. Interestingly, these density shock waves exhibit a transition from "subsonic" with compression at the back to "supersonic" with compression at the front of the population as the intensity of the external flow increases. This behavior is the result of a nontrivial interplay between hydrodynamic interactions and geometric confinement, and it is confirmed by a novel quasilinear wave model that properly captures the dependence of the shock formation on the external flow. These findings can be used to guide the development of novel mechanisms for controlling the emergent density distribution and the average population speed, with potentially profound implications on various processes in industry and biotechnology, such as the transport and sorting of cells in flow channels.

  12. Entanglement as a probe of confinement

    NASA Astrophysics Data System (ADS)

    Klebanov, Igor R.; Kutasov, David; Murugan, Arvind

    2008-06-01

    We investigate the entanglement entropy in gravity duals of confining large N gauge theories using the proposal of [S. Ryu, T. Takayanagi, Phys. Rev. Lett. 96 (2006) 181602, hep-th/0603001; S. Ryu, T. Takayanagi, JHEP 0608 (2006) 045, hep-th/0605073]. Dividing one of the directions of space into a line segment of length l and its complement, the entanglement entropy between the two subspaces is given by the classical action of the minimal bulk hypersurface which approaches the endpoints of the line segment at the boundary. We find that in confining backgrounds there are generally two such surfaces. One consists of two disconnected components localized at the endpoints of the line segment. The other contains a tube connecting the two components. The disconnected surface dominates the entropy for l above a certain critical value l while the connected one dominates below that value. The change of behavior at l=l is reminiscent of the finite temperature deconfinement transition: for ll as Nc0. We argue that a similar transition should occur in any field theory with a Hagedorn spectrum of non-interacting bound states. The requirement that the entanglement entropy has a phase transition may be useful in constraining gravity duals of confining theories.

  13. Counterpropagating Rossby waves in confined plane wakes

    PubMed Central

    Biancofiore, L.; Gallaire, F.

    2012-01-01

    In the present work, we revisit the temporal and the spatio-temporal stability of confined plane wakes under the perspective of the counterpropagating Rossby waves (CRWs). Within the context of broken line velocity profiles, each vorticity discontinuity can be associated to a counterpropagating Rossby wave. In the case of a wake modeled by a broken line profile, the interaction of two CRWs is shown to originate in a shear instability. Following this description, we first recover the stability results obtained by Juniper [J. Fluid Mech. 590, 163–185 (2007)]10.1017/S0022112007007975 and Biancofiore and Gallaire [Phys. Fluids 23, 034103 (2011)]10.1063/1.3554764 by means of the classical normal mode analysis. In this manner, we propose an explanation of the stabilizing influence of the confinement on the temporal stability properties. The CRW description further allows us to propose a new interpretation of the counterintuitive spatio-temporal destabilization in wake flows at moderate confinement noticed by Juniper [J. Fluid Mech. 565, 171–195 (2006)]10.1017/S0022112006001558: it is well predicted by the mean group velocity of the uncoupled CRWs. PMID:22865998

  14. Simulating tumor growth in confined heterogeneous environments

    NASA Astrophysics Data System (ADS)

    Gevertz, Jana L.; Gillies, George T.; Torquato, Salvatore

    2008-09-01

    The holy grail of computational tumor modeling is to develop a simulation tool that can be utilized in the clinic to predict neoplastic progression and propose individualized optimal treatment strategies. In order to develop such a predictive model, one must account for many of the complex processes involved in tumor growth. One interaction that has not been incorporated into computational models of neoplastic progression is the impact that organ-imposed physical confinement and heterogeneity have on tumor growth. For this reason, we have taken a cellular automaton algorithm that was originally designed to simulate spherically symmetric tumor growth and generalized the algorithm to incorporate the effects of tissue shape and structure. We show that models that do not account for organ/tissue geometry and topology lead to false conclusions about tumor spread, shape and size. The impact that confinement has on tumor growth is more pronounced when a neoplasm is growing close to, versus far from, the confining boundary. Thus, any clinical simulation tool of cancer progression must not only consider the shape and structure of the organ in which a tumor is growing, but must also consider the location of the tumor within the organ if it is to accurately predict neoplastic growth dynamics.

  15. Random Matrices in Non-confining Potentials

    NASA Astrophysics Data System (ADS)

    Allez, Romain; Dumaz, Laure

    2015-08-01

    We consider invariant matrix processes diffusing in non-confining cubic potentials of the form . We construct the trajectories of such processes for all time by restarting them whenever an explosion occurs, from a new (well chosen) initial condition, insuring continuity of the eigenvectors and of the non exploding eigenvalues. We characterize the dynamics of the spectrum in the limit of large dimension and analyze the stationary state of this evolution explicitly. We exhibit a sharp phase transition for the limiting spectral density at a critical value . If , then the potential presents a well near deep enough to confine all the particles inside, and the spectral density is supported on a compact interval. If however, the steady state is in fact dynamical with a macroscopic stationary flux of particles flowing across the system. We prove that this flux displays a second order phase transition at the critical value such that when where is an explicit constant. In the subcritical regime, the eigenvalues allocate according to a stationary density profile with full support in , flanked with heavy tails such that as . Our method applies to other non-confining potentials and we further investigate a family of quartic potentials, which were already studied in (Brezin et al. in Commun Math Phys 59:35-51, 1978) to count planar diagrams.

  16. Dynamics of Hyperbranched Polymers under Confinement

    NASA Astrophysics Data System (ADS)

    Androulaki, Krystallenia; Chrissopoulou, Kiriaki; Anastasiadis, Spiros H.; Prevosto, Daniele; Labardi, Massimiliano

    2015-03-01

    The effect of severe confinement on the dynamics of three different generations of hyperbranched polyesters (Boltorns) is investigated by Dielectric Spectroscopy. The polymers are intercalated within the galleries of natural Na+-MMT, thus, forming 1nm polymer films confined between solid walls. The Tg's of the polymers determined by DSC show a clear dependence on the generation whereas the transition is completely suppressed when all the polymer chains are intercalated. The dynamic investigation of the bulk polymers reveals two sub-Tg processes, with similar behavior for the three polymers with the segmental relaxation observed above the Tg of each. For the nanocomposites, where all polymers are severely confined, the dynamics show significant differences compared to that of the bulk polymers. The sub-Tg processes are similar for the three generations but significantly faster and with weaker temperature dependence than those in the bulk. The segmental process appears at temperatures below the bulk polymer Tg, it exhibits an Arrhenius temperature dependence and shows differences for the three generations. A slow process that appears at higher temperatures is due to interfacial polarization. Co-financed by the EU and Greek funds through the Operational Program ``Education and Lifelong Learning'' of the NSRF-Research Funding Program: THALES-Investing in knowledge society through the Eur. Social Fund (MIS 377278) and COST Action MP0902-COINAPO.

  17. Electron Confinement in Cylindrical Potential Well

    NASA Astrophysics Data System (ADS)

    Baltenkov, A. S.; Msezane, A. Z.

    2016-05-01

    We show that studying the solutions of the wave equation for an electron confined in a cylindrical potential well offers the possibility to analyze the confinement behavior of an electron executing one- or two-dimensional motion in the remaining three-dimensional space within the framework of the same mathematical model of the potential well. Some low-lying electronic states with different symmetries are considered and the corresponding wave functions are calculated. The behavior of their nodes and their peak positions with respect to the parameters of the cylindrical well is analyzed. Additionally, the momentum distributions of electrons in these states are calculated. The limiting cases of the ratio of the cylinder length H to its radius R0 are considered; when H significantly exceeds R0 and when R0 is much greater than H. The possible application of the results obtained here for the description of the general features in the behavior of electrons in nanowires with metallic type of conductivity (or nanotubes) and ultrathin epitaxial films (or graphene sheets) are discussed. Possible experiments are suggested as well where the quantum confinement can be manifested. Work supported by the Uzbek Foundation (ASB) and by the U.S. DOE, Division of Chemical Sciences, Geosciences and Biosciences, Office of Basic Energy Sciences, Office of Energy Research (AZM).

  18. Coronal Electron Confinement by Double Layers

    NASA Astrophysics Data System (ADS)

    Li, T. C.; Drake, J. F.; Swisdak, M.

    2013-12-01

    In observations of flare-heated electrons in the solar corona, a longstanding problem is the unexplained prolonged lifetime of the electrons compared to their transit time across the source. This suggests confinement. Recent particle-in-cell (PIC) simulations, which explored the transport of pre-accelerated hot electrons through ambient cold plasma, showed that the formation of a highly localized electrostatic potential drop, in the form of a double layer (DL), significantly inhibited the transport of hot electrons. The effectiveness of confinement by a DL is linked to the strength of the DL as defined by its potential drop. In this work, we investigate the scaling of the DL strength with the hot electron temperature by PIC simulations and find a linear scaling. We demonstrate that the strength is limited by the formation of parallel shocks. Based on this, we analytically determine the maximum DL strength, and also find a linear scaling with the hot electron temperature. The DL strength obtained from the analytic calculation is comparable to that from the simulations. At the maximum strength, the DL is capable of confining a significant fraction of hot electrons in the source.

  19. Density Shock Waves in Confined Microswimmers.

    PubMed

    Tsang, Alan Cheng Hou; Kanso, Eva

    2016-01-29

    Motile and driven particles confined in microfluidic channels exhibit interesting emergent behavior, from propagating density bands to density shock waves. A deeper understanding of the physical mechanisms responsible for these emergent structures is relevant to a number of physical and biomedical applications. Here, we study the formation of density shock waves in the context of an idealized model of microswimmers confined in a narrow channel and subject to a uniform external flow. Interestingly, these density shock waves exhibit a transition from "subsonic" with compression at the back to "supersonic" with compression at the front of the population as the intensity of the external flow increases. This behavior is the result of a nontrivial interplay between hydrodynamic interactions and geometric confinement, and it is confirmed by a novel quasilinear wave model that properly captures the dependence of the shock formation on the external flow. These findings can be used to guide the development of novel mechanisms for controlling the emergent density distribution and the average population speed, with potentially profound implications on various processes in industry and biotechnology, such as the transport and sorting of cells in flow channels. PMID:26871357

  20. Counterpropagating Rossby waves in confined plane wakes.

    PubMed

    Biancofiore, L; Gallaire, F

    2012-07-01

    In the present work, we revisit the temporal and the spatio-temporal stability of confined plane wakes under the perspective of the counterpropagating Rossby waves (CRWs). Within the context of broken line velocity profiles, each vorticity discontinuity can be associated to a counterpropagating Rossby wave. In the case of a wake modeled by a broken line profile, the interaction of two CRWs is shown to originate in a shear instability. Following this description, we first recover the stability results obtained by Juniper [J. Fluid Mech. 590, 163-185 (2007)]10.1017/S0022112007007975 and Biancofiore and Gallaire [Phys. Fluids 23, 034103 (2011)]10.1063/1.3554764 by means of the classical normal mode analysis. In this manner, we propose an explanation of the stabilizing influence of the confinement on the temporal stability properties. The CRW description further allows us to propose a new interpretation of the counterintuitive spatio-temporal destabilization in wake flows at moderate confinement noticed by Juniper [J. Fluid Mech. 565, 171-195 (2006)]10.1017/S0022112006001558: it is well predicted by the mean group velocity of the uncoupled CRWs. PMID:22865998

  1. Confined Turbulent Swirling Recirculating Flow Predictions. Ph.D. Thesis

    NASA Technical Reports Server (NTRS)

    Abujelala, M. T.

    1984-01-01

    Turbulent swirling flow, the STARPIC computer code, turbulence modeling of turbulent flows, the k-xi turbulence model and extensions, turbulence parameters deduction from swirling confined flow measurements, extension of the k-xi to confined swirling recirculating flows, and general predictions for confined turbulent swirling flow are discussed.

  2. 46 CFR 148.86 - Confined space entry.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Confined space entry. 148.86 Section 148.86 Shipping... MATERIALS THAT REQUIRE SPECIAL HANDLING Minimum Transportation Requirements § 148.86 Confined space entry. (a) Except in an emergency, no person may enter a confined space unless that space has been tested...

  3. 46 CFR 148.86 - Confined space entry.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Confined space entry. 148.86 Section 148.86 Shipping... MATERIALS THAT REQUIRE SPECIAL HANDLING Minimum Transportation Requirements § 148.86 Confined space entry. (a) Except in an emergency, no person may enter a confined space unless that space has been tested...

  4. 46 CFR 148.86 - Confined space entry.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Confined space entry. 148.86 Section 148.86 Shipping... MATERIALS THAT REQUIRE SPECIAL HANDLING Minimum Transportation Requirements § 148.86 Confined space entry. (a) Except in an emergency, no person may enter a confined space unless that space has been tested...

  5. 25 CFR 141.21 - Trade confined to premises.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Trade confined to premises. 141.21 Section 141.21 Indians... NAVAJO, HOPI AND ZUNI RESERVATIONS General Business Practices § 141.21 Trade confined to premises. The licensee shall confine all trade on the reservation to the premises specified in the license, except,...

  6. 25 CFR 141.21 - Trade confined to premises.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Trade confined to premises. 141.21 Section 141.21 Indians... NAVAJO, HOPI AND ZUNI RESERVATIONS General Business Practices § 141.21 Trade confined to premises. The licensee shall confine all trade on the reservation to the premises specified in the license, except,...

  7. 25 CFR 141.21 - Trade confined to premises.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Trade confined to premises. 141.21 Section 141.21 Indians... NAVAJO, HOPI AND ZUNI RESERVATIONS General Business Practices § 141.21 Trade confined to premises. The licensee shall confine all trade on the reservation to the premises specified in the license, except,...

  8. 25 CFR 141.21 - Trade confined to premises.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Trade confined to premises. 141.21 Section 141.21 Indians... NAVAJO, HOPI AND ZUNI RESERVATIONS General Business Practices § 141.21 Trade confined to premises. The licensee shall confine all trade on the reservation to the premises specified in the license, except,...

  9. 25 CFR 141.21 - Trade confined to premises.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Trade confined to premises. 141.21 Section 141.21 Indians... NAVAJO, HOPI AND ZUNI RESERVATIONS General Business Practices § 141.21 Trade confined to premises. The licensee shall confine all trade on the reservation to the premises specified in the license, except,...

  10. 46 CFR 148.86 - Confined space entry.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Confined space entry. 148.86 Section 148.86 Shipping... MATERIALS THAT REQUIRE SPECIAL HANDLING Minimum Transportation Requirements § 148.86 Confined space entry. (a) Except in an emergency, no person may enter a confined space unless that space has been tested...

  11. Meteorological impact of realistic Terra Nova Bay polynyas.

    NASA Astrophysics Data System (ADS)

    Morelli, Sandra

    2010-05-01

    The energy exchange between the ocean and the atmosphere in the Antarctic marginal sea ice zone is influenced by the extent of sea-ice cover. In areas of open water, a direct contact is established and intense energy exchanges occur, due to the large difference of temperature between the water and the air above it. This implies that the polynyas are areas where the ocean exchanges energy with the atmosphere and as a result they have an effect on the polar meteorology/climate. The work presented here concerns real polynya events in the region of Terra Nova Bay (TNB), Antarctica, where a recurring coastal polynya occurs nearby the Italian Antarctic Base. The aim is the study of the impact of polynyas on the atmosphere by three-dimensional numerical simulations. The ETA model (Mesinger et al., 2006) was used and ECMWF and NCEP data provided the initial and boundary conditions. The model had already been successfully used in the Antarctic area (Casini and Morelli, 2007) A polynya of realistic size (as observed by satellite image) was included in the initial conditions for the simulations and a study of the air circulation during the events is found in Morelli et al. (2007), Morelli and Casini (2008), Morelli et al. (2009). The Eta Model reproduced the evolution of upper and mod-level conditions in good agreement with AVHRR observations (Morelli, 2008, Morelli and Parmiggiani, 2009). Also, the simulated 10 m wind was well correlated with the observed extension of the polynya. In order to isolate the effect of the presence of the open water area on the structure of the atmospheric boundary layer and on the atmospheric circulation, further simulations were performed without the presence of the polynya, i.e. with its extent covered with sea ice. The numerical simulations show that the polynyas act to increase the speed of the air above them and generate strong heat fluxes that warm the air. The effects are found over and downwind the sea ice free area. Results from the Eta

  12. A Realistic Hot Water Draw Specification for Rating Solar Water Heaters

    SciTech Connect

    Burch, J.

    2012-06-01

    In the United States, annual performance ratings for solar water heaters are simulated, using TMY weather and specified water draw. This paper proposes a more realistic ratings draw that eliminates most bias by improving mains inlet temperature and by specifying realistic hot water use. Presented at the 2012 World Renewable Energy Forum; Denver, Colorado; May 13-17, 2012.

  13. The Effects of Instruction on Elementary Teacher's Realistic and Idealistic Attitudes Toward Selected Science Related Concepts.

    ERIC Educational Resources Information Center

    Bogut, Thomas L.; McFarland, Bruce L.

    Reported is a study designed to determine (1) if there was any significant relationship between elementary teachers' realistic and idealistic attitudes toward selected science-related concepts, (2) if the degree of open- or closed-mindedness of the teachers had any relationship to these realistic or idealistic attitudes, and (3) if instruction had…

  14. Time for realistic job previews in nursing as a recruitment and retention tool.

    PubMed

    Gilmartin, Mattia J; Aponte, Priscilla C; Nokes, Kathleen

    2013-01-01

    Realistic job previews are well-established, cost-effective, and evidence-based recruitment and retention tools that nurses in professional development have largely overlooked. A realistic job preview for experienced staff nurses pioneering the Clinical Nurse Leader® role is presented along with implications for nursing professional development practice. PMID:24060656

  15. Marine Corps Recruit Training Attrition: The Effect of Realistic Job Preview and Stress-Coping Films.

    ERIC Educational Resources Information Center

    Githens, William H.; Zalinski, James

    Two films were evaluated to determine their effectiveness in reducing attrition among Marine Corps recruits. The films were a realistic job preview of military training and a stress-coping film. Platoons of Marine recruits were randomly assigned to four treatment groups: viewing the realistic job preview film, viewing the stress-coping film,…

  16. The role of confinement on stress-driven grain boundary motion in nanocrystalline aluminum thin films

    NASA Astrophysics Data System (ADS)

    Gianola, Daniel S.; Farkas, Diana; Gamarra, Martin; He, Mo-rigen

    2012-12-01

    3D molecular dynamics simulations are performed to investigate the role of microstructural confinement on room temperature stress-driven grain boundary (GB) motion for a general population of GBs in nanocrystalline Al thin films. Detailed analysis and comparison with experimental results reveal how coupled GB migration and GB sliding are manifested in realistic nanoscale networks of GBs. The proximity of free surfaces to GBs plays a significant role in their mobility and results in unique surface topography evolution. We highlight the effects of microstructural features, such as triple junctions, as constraints to otherwise uninhibited GB motion. We also study the pinning effects of impurities segregated to GBs that hinder their motion. Finally, the implications of GB motion as a deformation mechanism governing the mechanical behavior of nanocrystalline materials are discussed.

  17. Relaxation processes and glass transition in confined 1,4-polybutadiene films: A Molecular Dynamics study

    NASA Astrophysics Data System (ADS)

    Paul, Wolfgang; Solar, Mathieu

    We will present results from Molecular Dynamics simulations of a chemically realistic model of 1,4-polybutadiene (PB) chains confined by graphite walls. Relaxation processes in this system are heterogeneous and anisotropic. We will present evidence for a slow additional relaxation process related to chain desorption from the walls. We also study the structural relaxation resolved with respect to the distance from the graphite walls and show the influence of structural changes on the relaxation behavior. The temperature dependence of the dielectric relaxation in layers of different thickness near the walls shows no indication of a shift of Tg as a function of thickness when analyzed with a Vogel-Fulcher fit. We explain this by the importance of intramolecular dihedral barriers for the glass transition in PB which dominate over the density changes next to a wall except for a 1 nm thick layer directly at the wall.

  18. Stability properties and fast ion confinement of hybrid tokamak plasma configurations

    NASA Astrophysics Data System (ADS)

    Graves, J. P.; Brunetti, D.; Pfefferle, D.; Faustin, J. M. P.; Cooper, W. A.; Kleiner, A.; Lanthaler, S.; Patten, H. W.; Raghunathan, M.

    2015-11-01

    In hybrid scenarios with flat q just above unity, extremely fast growing tearing modes are born from toroidal sidebands of the near resonant ideal internal kink mode. New scalings of the growth rate with the magnetic Reynolds number arise from two fluid effects and sheared toroidal flow. Non-linear saturated 1/1 dominant modes obtained from initial value stability calculation agree with the amplitude of the 1/1 component of a 3D VMEC equilibrium calculation. Viable and realistic equilibrium representation of such internal kink modes allow fast ion studies to be accurately established. Calculations of MAST neutral beam ion distributions using the VENUS-LEVIS code show very good agreement of observed impaired core fast ion confinement when long lived modes occur. The 3D ICRH code SCENIC also enables the establishment of minority RF distributions in hybrid plasmas susceptible to saturated near resonant internal kink modes.

  19. Precision robotic control of agricultural vehicles on realistic farm trajectories

    NASA Astrophysics Data System (ADS)

    Bell, Thomas

    High-precision "autofarming", or precise agricultural vehicle guidance, is rapidly becoming a reality thanks to increasing computing power and carrier-phase differential GPS ("CPDGPS") position and attitude sensors. Realistic farm trajectories will include not only rows but also arcs created by smoothly joining rows or path-planning algorithms, spirals for farming center-pivot irrigated fields, and curved trajectories dictated by nonlinear field boundaries. In addition, fields are often sloped, and accurate control may be required either on linear trajectories or on curved contours. A three-dimensional vehicle model which adapts to changing vehicle and ground conditions was created, and a low-order model for controller synthesis was extracted based on nominal conditions. The model was extended to include a towed implement. Experimentation showed that an extended Kalman filter could identify the vehicle's state in real-time. An approximation was derived for the additional positional uncertainty introduced by the noisy "lever-arm correction" necessary to translate the GPS position measurement at the roof antenna to the vehicle's control point on the ground; this approximation was then used to support the assertion that attitude measurement accuracy was as important to control point position measurement as the original position measurement accuracy at the GPS antenna. The low-order vehicle control model was transformed to polar coordinates for control on arcs and spirals. Experimental data showed that the tractor's control, point tracked an arc to within a -0.3 cm mean and a 3.4 cm standard deviation and a spiral to within a -0.2 cm mean and a 5.3 cm standard deviation. Cubic splines were used to describe curve trajectories, and a general expression for the time-rate-of-change of curve-related parameters was derived. Four vehicle control algorithms were derived for curve tracking: linear local-error control based on linearizing the vehicle about the curve's radius of

  20. Confinement-induced vitrification of aqueous sodium chloride solutions

    NASA Astrophysics Data System (ADS)

    Zhao, Lishan; Pan, Liqing; Cao, Zexian; Wang, Qiang

    2016-03-01

    Bulk aqueous solution of NaCl is a poor glass former, it vitrifies only under high pressure. Here we report the investigation of glass transition of NaCl solutions confined in nanopores. By inspecting the dependence of glass transition temperature and heat flow jump at transition it is concluded that vitrification of confined NaCl solutions involves only the eutectic phase and the precipitated ice core may help furnish the demanded confinement strength. Ion-water interaction still plays a dominant role in determining vitrification of solutions even under nano-confinement, as under exactly the same confinement conditions vitrification of aqueous KCl solutions was not detected.

  1. Materials self-assembly and fabrication in confined spaces

    SciTech Connect

    Ramanathan, Nathan Muruganathan; Kilbey, II, S Michael; Ji, Dr. Qingmin; Hill, Dr. Jonathan P; Ariga, Katsuhiko

    2012-01-01

    Molecular assemblies have been mainly researched in open spaces for long time. However, recent researches have revealed that there are many interesting aspects remained in self-assemblies in confined spaces. Molecular association within nanospaces such as mesoporous materials provide unusual phenomena based on highly restricted molecular motions. Current research endeavors in materials science and technology are focused on developing either new class of materials or materials with novel/multiple functionalities which is often achived via molecular assembly in confined spaces. Template synthesis and guided assemblies are distinguishable examples for molecular assembly in confined spaces. So far, different aspects of molecular confinements are discussed separately. In this review, the focus is specifically to bring some potential developments in various aspects of confined spaces for molecular self-assembly under one roof. We arrange the sections in this review based on the nature of the confinements; accordingly the topological/geometrical confinements, chemical and biological confinements, and confinements within thin film, respectively. Following these sections, molecular confinements for practical applications are shortly described in order to show connections of these scientific aspects with possible practical uses. One of the most important facts is that the self-assembly in confined spaces stands at meeting points of top-down and bottom-up fabrications, which would be an ultimate key to push the limits of nanotechnology and nanoscience.

  2. Balancing Accuracy and Cost of Confinement Simulations by Interpolation and Extrapolation of Confinement Energies.

    PubMed

    Villemot, François; Capelli, Riccardo; Colombo, Giorgio; van der Vaart, Arjan

    2016-06-14

    Improvements to the confinement method for the calculation of conformational free energy differences are presented. By taking advantage of phase space overlap between simulations at different frequencies, significant gains in accuracy and speed are reached. The optimal frequency spacing for the simulations is obtained from extrapolations of the confinement energy, and relaxation time analysis is used to determine time steps, simulation lengths, and friction coefficients. At postprocessing, interpolation of confinement energies is used to significantly reduce discretization errors in the calculation of conformational free energies. The efficiency of this protocol is illustrated by applications to alanine n-peptides and lactoferricin. For the alanine-n-peptide, errors were reduced between 2- and 10-fold and sampling times between 8- and 67-fold, while for lactoferricin the long sampling times at low frequencies were reduced 10-100-fold. PMID:27120438

  3. Pathways to dewetting in hydrophobic confinement

    PubMed Central

    Remsing, Richard C.; Xi, Erte; Vembanur, Srivathsan; Sharma, Sumit; Debenedetti, Pablo G.; Garde, Shekhar; Patel, Amish J.

    2015-01-01

    Liquid water can become metastable with respect to its vapor in hydrophobic confinement. The resulting dewetting transitions are often impeded by large kinetic barriers. According to macroscopic theory, such barriers arise from the free energy required to nucleate a critical vapor tube that spans the region between two hydrophobic surfaces—tubes with smaller radii collapse, whereas larger ones grow to dry the entire confined region. Using extensive molecular simulations of water between two nanoscopic hydrophobic surfaces, in conjunction with advanced sampling techniques, here we show that for intersurface separations that thermodynamically favor dewetting, the barrier to dewetting does not correspond to the formation of a (classical) critical vapor tube. Instead, it corresponds to an abrupt transition from an isolated cavity adjacent to one of the confining surfaces to a gap-spanning vapor tube that is already larger than the critical vapor tube anticipated by macroscopic theory. Correspondingly, the barrier to dewetting is also smaller than the classical expectation. We show that the peculiar nature of water density fluctuations adjacent to extended hydrophobic surfaces—namely, the enhanced likelihood of observing low-density fluctuations relative to Gaussian statistics—facilitates this nonclassical behavior. By stabilizing isolated cavities relative to vapor tubes, enhanced water density fluctuations thus stabilize novel pathways, which circumvent the classical barriers and offer diminished resistance to dewetting. Our results thus suggest a key role for fluctuations in speeding up the kinetics of numerous phenomena ranging from Cassie–Wenzel transitions on superhydrophobic surfaces, to hydrophobically driven biomolecular folding and assembly. PMID:26100866

  4. Spherical microwave confinement and ball lightning

    NASA Astrophysics Data System (ADS)

    Robinson, William Richard

    This dissertation presents the results of research done on unconventional energy technologies from 1995 to 2009. The present civilization depends on an infrastructure that was constructed and is maintained almost entirely using concentrated fuels and ores, both of which will run out. Diffuse renewable energy sources rely on this same infrastructure, and hence face the same limitations. I first examined sonoluminescence directed toward fusion, but demonstrated theoretically that this is impossible. I next studied Low Energy Nuclear Reactions and developed methods for improving results, although these have not been implemented. In 2000, I began Spherical Microwave Confinement (SMC), which confines and heats plasma with microwaves in a spherical chamber. The reactor was designed and built to provide the data needed to investigate the possibility of achieving fusion conditions with microwave confinement. A second objective was to attempt to create ball lightning (BL). The reactor featured 20 magnetrons, which were driven by a capacitor bank and operated in a 0.2 s pulse mode at 2.45 GHz. These provided 20 kW to an icosahedral array of 20 antennas. Video of plasmas led to a redesign of the antennas to provide better coupling of the microwaves to the plasma. A second improvement was a grid at the base of the antennas, which provided corona electrons and an electric field to aid quick formation of plasmas. Although fusion conditions were never achieved and ball lightning not observed, experience gained from operating this basic, affordable system has been incorporated in a more sophisticated reactor design intended for future research. This would use magnets that were originally planned. The cusp geometry of the magnetic fields is suitable for electron cyclotron resonance in the same type of closed surface that in existing reactors has generated high-temperature plasmas. Should ball lightning be created, it could be a practical power source with nearly ideal

  5. Equilibrium of an elastically confined liquid drop

    NASA Astrophysics Data System (ADS)

    Kwon, Hyuk-Min; Kim, Ho-Young; Puëll, Jérôme; Mahadevan, L.

    2008-05-01

    When a liquid drop is confined between an elastic plate and a rigid substrate, it spreads spontaneously due to the effects of interfacial forces, eventually reaching an equilibrium shape determined by the balance between elastic and capillary effects. We provide an analytical theory for the static shape of the sheet and the extent of liquid spreading and show that our experiments are quantitatively consistent with the theory. The theory is relevant for the first step of painting when a brush is brought down on to canvas. More mundanely, it allows us to understand the stiction of microcantilevers to wafer substrates occurring in microelectromechanical fabrication processes.

  6. Plasma Confinement in the UCLA Electric Tokamak.

    NASA Astrophysics Data System (ADS)

    Taylor, Robert J.

    2001-10-01

    The main goal of the newly constructed large Electric Tokamak (R = 5 m, a = 1 m, BT < 0.25 T) is to access an omnigeneous, unity beta(S.C. Cowley, P.K. Kaw, R.S. Kelly, R.M. Kulsrud, Phys. fluids B 3 (1991) 2066.) plasma regime. The design goal was to achieve good confinement at low magnetic fields, consistent with the high beta goal. To keep the program cost down, we adopted the use of ICRF as the primary heating source. Consequently, antenna surfaces covering 1/2 of the surface of the tokamak has been prepared for heating and current drive. Very clean hydrogenic plasmas have been achieved with loop voltage below 0.7 volt and densities 3 times above the Murakami limit, n(0) > 8 x 10^12 cm-3 when there is no MHD activity. The electron temperature, derived from the plasma conductivity is > 250 eV with a central electron energy confinement time > 350 msec in ohmic conditions. The sawteeth period is 50 msec. Edge plasma rotation is induced by plasma biasing via electron injection in an analogous manner to that seen in CCT(R.J. Taylor, M.L. Brown, B.D. Fried, H. Grote, J.R. Liberati, G.J. Morales, P. Pribyl, D. Darrow, and M. Ono. Phys. Rev Lett. 63 2365 1989.) and the neoclassical bifurcation is close to that described by Shaing et al(K.C. Shaing and E.C. Crume, Phys. Rev. Lett. 63 2369 (1989).). In the ohmic phase the confinement tends to be MHD limited. The ICRF heating eliminates the MHD disturbances. Under second harmonic heating conditions, we observe an internal confinement peaking characterized by doubling of the core density and a corresponding increase in the central electron temperature. Charge exchange data, Doppler data in visible H-alpha light, and EC radiation all indicate that ICRF heating works much better than expected. The major effort is focused on increasing the power input and controlling the resulting equilibrium. This task appears to be easy since our current pulses are approaching the 3 second mark without RF heating or current drive. Our

  7. Effective diffusion of confined active Brownian swimmers

    NASA Astrophysics Data System (ADS)

    Sandoval, Mario; Dagdug, Leonardo

    2014-11-01

    We find theoretically the effect of confinement and thermal fluctuations, on the diffusivity of a spherical active swimmer moving inside a two-dimensional narrow cavity of general shape. The explicit formulas for the effective diffusion coefficient of a swimmer moving inside two particular cavities are presented. We also compare our analytical results with Brownian Dynamics simulations and we obtain excellent agreement. L.D. thanks Consejo Nacional de Ciencia y Tecnologia (CONACyT) Mexico, for partial support by Grant No. 176452. M. S. thanks CONACyT and Programa de Mejoramiento de Profesorado (PROMEP) for partially funding this work under Grant No. 103.5/13/6732.

  8. Oscillatory dissipation of a simple confined liquid.

    PubMed

    Maali, Abdelhamid; Cohen-Bouhacina, Touria; Couturier, Gérard; Aimé, Jean-Pierre

    2006-03-01

    We present a sensitive measurement of the dissipation and the effective viscosity of a simple confined liquid (octamethylcyclotetrasiloxane) using an atomic force microscope. The experimental data show that the damping and the effective viscosity increase and present oscillations as the gap between the cantilever tip and the surface is diminished. To our knowledge, the damping and the viscosity modulation are reported here with such good accuracy for the first time. Such an experimental result is different from what has been reported earlier where only a continuous increase of the damping and the viscosity are observed. PMID:16606201

  9. Magnetohydrodynamically generated velocities in confined plasma

    SciTech Connect

    Morales, Jorge A. Bos, Wouter J. T.; Schneider, Kai; Montgomery, David C.

    2015-04-15

    We investigate by numerical simulation the rotational flows in a toroid confining a conducting magnetofluid in which a current is driven by the application of externally supported electric and magnetic fields. The computation involves no microscopic instabilities and is purely magnetohydrodynamic (MHD). We show how the properties and intensity of the rotations are regulated by dimensionless numbers (Lundquist and viscous Lundquist) that contain the resistivity and viscosity of the magnetofluid. At the magnetohydrodynamic level (uniform mass density and incompressible magnetofluids), rotational flows appear in toroidal, driven MHD. The evolution of these flows with the transport coefficients, geometry, and safety factor are described.

  10. Summary of progress in inertial confinement fusion

    SciTech Connect

    Younger, S.M.

    1992-12-31

    Progress in inertial confinement fusion (ICF) has been very rapid over the past two years. Significant advances have been made in the production of smooth laser beams, the focusing of light ions beams, and the development of heavy ion accelerators. The availability of advanced target diagnostics on several major drivers has resulted in an extensive database of target performance over a wide range of conditions. Theoretical models of ICF targets are approaching the predictive level with two and even three dimensional calculations becoming routine. Within the next several years information should be available to allow confident extrapolation to ignition on the next generation driver.

  11. Summary of progress in inertial confinement fusion

    SciTech Connect

    Younger, S.M.

    1992-01-01

    Progress in inertial confinement fusion (ICF) has been very rapid over the past two years. Significant advances have been made in the production of smooth laser beams, the focusing of light ions beams, and the development of heavy ion accelerators. The availability of advanced target diagnostics on several major drivers has resulted in an extensive database of target performance over a wide range of conditions. Theoretical models of ICF targets are approaching the predictive level with two and even three dimensional calculations becoming routine. Within the next several years information should be available to allow confident extrapolation to ignition on the next generation driver.

  12. Diamond Ablators for Inertial Confinement Fusion

    SciTech Connect

    Biener, J; Mirkarimi, P B; Tringe, J W; Baker, S L; Wang, Y M; Kucheyev, S O; Teslich, N E; Wu, K J; Hamza, A V; Wild, C; Woerner, E; Koidl, P; Bruehne, K; Fecht, H

    2005-06-21

    Diamond has a unique combination of physical properties for the inertial confinement fusion ablator application, such as appropriate optical properties, high atomic density, high yield strength, and high thermal conductivity. Here, we present a feasible concept to fabricate diamond ablator shells. The fabrication of diamond capsules is a multi-step process, which involves diamond chemical vapor deposition on silicon mandrels followed by polishing, microfabrication of holes, and removing of the silicon mandrel by an etch process. We also discuss the pros and cons of coarse-grained optical quality and nanocrystalline chemical vapor deposition diamond films for the ablator application.

  13. Quark number susceptibilities, strangeness, and dynamical confinement

    NASA Astrophysics Data System (ADS)

    Gavai, Rajiv V.; Gupta, Sourendu

    2001-10-01

    We report the first results on the strange quark number susceptibility χs over a large range of temperatures, mainly in the plasma phase of QCD. χs jumps across the phase transition temperature Tc and grows rapidly with temperature above but close to Tc. For all quark masses and susceptibilities in the entire temperature range studied, we find a significant departure from ideal-gas values. We also observe a strong correlation between these quantities and the susceptibility in the pseudoscalar channel, supporting ideas of ``dynamical confinement'' in the high temperature phase of the QCD plasma.

  14. Confining quark condensate model of the nucleon.

    SciTech Connect

    Frank, Michael; Tandy, Peter

    1992-07-01

    We obtain a mean-field solution for the nucleon as a quark-meson soliton obtained from the action of the global color-symmetry model of QCD. All dynamics is generated from an effective interaction of quark currents. At the quark-meson level there are two novel features: (1) absolute confinement is produced from the space-time structure of the dynamical self-energy in the vacuum quark propagator; and (2) the related scalar meson field is an extended q-barq composite that couples nonlocally to quarks. The influence of these features upon the nucleon mass contributions and other nucleon properties is presented.

  15. Swollen lamellar phases confined in capillarylike pores

    NASA Astrophysics Data System (ADS)

    Tasinkevych, M.; Ciach, A.

    2005-12-01

    Structure and mechanical properties of swollen lamellar phases confined in square-base pipes are studied in a mesoscopic lattice model for oil-water-surfactant mixtures. Structure depends crucially on a thermodynamic state and is quite different far and close to the coexistence with a uniform phase. Lamellar domains with different orientations of lamellas are formed in most cases, and the mechanics is determined mainly by domain-wall energies. Shift of phase equilibria in square-base pipes compared to the bulk is just opposite to the shift in slits. We find capillary delamellarization for short-period and for swollen phases, for hydrophilic and for neutral external surfaces.

  16. Micromachining of inertial confinement fusion targets

    SciTech Connect

    Gobby, P.L.; Salzer, L.J.; Day, R.D.

    1996-12-31

    Many experiments conducted on today`s largest inertial confinement fusion drive lasers require target components with sub-millimeter dimensions, precisions of a micron or less and surface finishes measured in nanometers. For metal and plastic, techniques using direct machining with diamond tools have been developed that yield the desired parts. New techniques that will be discussed include the quick-flip locator, a magnetically held kinematic mount that has allowed the direct machining of millimeter-sized beryllium hemishells whose inside and outside surface are concentric to within 0.25 micron, and an electronic version of a tracer lathe which has produced precise azimuthal variations of less than a micron.

  17. Microwave Reflectometry for Magnetically Confined Plasmas

    SciTech Connect

    Mazzucato, E.

    1998-02-01

    This paper is about microwave reflectometry -- a radar technique for plasma density measurements using the reflection of electromagnetic waves by a plasma cutoff. Both the theoretical foundations of reflectometry and its practical application to the study of magnetically confined plasmas are reviewed in this paper. In particular, the role of short-scale density fluctuations is discussed at length, both as a unique diagnostic tool for turbulence studies in thermonuclear plasmas and for the deleterious effects that fluctuations may have on the measurement of the average plasma density with microwave reflectometry.

  18. Isolation and confinement - Considerations for colonization

    NASA Technical Reports Server (NTRS)

    Akins, F. R.

    1978-01-01

    This paper discusses three types of isolation (sensory/perceptual, temporal, and social) that could adversely affect mankind in space. The literature dealing with laboratory and field experiments relevant to these areas is summarized and suggestions are given for dealing with these problems within the space colony community. Also, consideration is given to the potential effects of physical confinement and the need for usable space. Finally, a modification of Maslow's hierarchy of needs is proposed as a theoretical framework to understand and investigate mankind's psychological needs in space.

  19. Perlite for permanent confinement of cesium

    NASA Astrophysics Data System (ADS)

    Balencie, J.; Burger, D.; Rehspringer, J.-L.; Estournès, C.; Vilminot, S.; Richard-Plouet, M.; Boos, A.

    2006-06-01

    We present the potential use of expanded perlite, a metastable amorphous hydrated aluminium silicate, as a permanent medium for the long-term confinement of cesium. The method requires simply a loading by mixing an aqueous cesium nitrate solution and expanded perlite at 300 K followed by densification by sintering. The formation of pollucite, CsAlSi2O6, a naturally occurring mineral phase, upon careful heat treatment is demonstrated by X-ray diffraction. Leaching tests on the resulting glass-ceramics reveal a very low Cs departure of 0.5 mg m-2 d-1.

  20. Confined systems within arbitrary enclosed surfaces

    NASA Astrophysics Data System (ADS)

    Burrows, B. L.; Cohen, M.

    2016-06-01

    A new model of electronic confinement in atoms and molecules is presented. This is based on the electronic flux J which is assumed to vanish on some notional bounding surface of arbitrary shape. J is necessarily calculated using an approximate wave-function, whose parameters are chosen to satisfy the required surface conditions. This model embraces the results of all previous calculations for which the wave-functions or their derivatives vanish on conveniently shaped surfaces, but now extends the theory to more general surfaces. Examples include one-centre hydrogen-like atoms, the valence state of Li and the two centre molecular systems {{{H}}}2+ and {{HeH}}++.

  1. Alpha particle confinement in tandem mirrors

    SciTech Connect

    Devoto, R.S.; Ohnishi, M.; Kerns, J.; Woo, J.T.

    1980-10-10

    Mechanisms leading to loss of alpha particles from non-axisymmetric tandem mirrors are considered. Stochastic diffusion due to bounce-drift resonances, which can cause rapid radial losses of high-energy alpha particles, can be suppressed by imposing a 20% rise in axisymmetric fields before the quadrupole transition sections. Alpha particles should then be well-confined until thermal energies when they enter the resonant plateau require. A fast code for computation of drift behavior in reactors is described. Sample calculations are presented for resonant particles in a proposed coil set for the Tandem Mirror Next Step.

  2. Bernoulli's formula and Poisson's equations for a confined quantum gas: Effects due to a moving piston

    NASA Astrophysics Data System (ADS)

    Nakamura, Katsuhiro; Sobirov, Zarifboy A.; Matrasulov, Davron U.; Avazbaev, Sanat K.

    2012-12-01

    We study a nonequilibrium equation of states of an ideal quantum gas confined in the cavity under a moving piston with a small but finite velocity in the case in which the cavity wall suddenly begins to move at the time origin. Confining ourselves to the thermally isolated process, the quantum nonadiabatic (QNA) contribution to Poisson's adiabatic equations and to Bernoulli's formula which bridges the pressure and internal energy is elucidated. We carry out a statistical mean of the nonadiabatic (time-reversal-symmetric) force operator found in our preceding paper [Nakamura , Phys. Rev. EPLEEE81539-375510.1103/PhysRevE.83.041133 83, 041133 (2011)] in both the low-temperature quantum-mechanical and high-temperature quasiclassical regimes. The QNA contribution, which is proportional to the square of the piston's velocity and to the inverse of the longitudinal size of the cavity, has a coefficient that is dependent on the temperature, gas density, and dimensionality of the cavity. The investigation is done for a unidirectionally expanding three-dimensional (3D) rectangular parallelepiped cavity as well as its 1D version. Its relevance in a realistic nanoscale heat engine is discussed.

  3. Optical confinement methods for continued scaling of CMOS image sensor pixels.

    PubMed

    Fesenmaier, Christian C; Huo, Yijie; Catrysse, Peter B

    2008-12-01

    The pixels that make up CMOS image sensors have steadily decreased in size over the last decade. This scaling has two effects: first, the amount of light incident on each pixel decreases, making optical efficiency, i.e., the collection of each photon, more important. Second, diffraction comes into play when pixel size approaches the wavelength of visible light, resulting in increased spatial optical crosstalk. To address these two effects, we investigate and compare three methods for guiding incident light from the microlens down to the photodiode. Two of these techniques rely on total internal reflection (TIR) at the boundary between dielectric media of different refractive indices, while the third uses reflection at a metal-dielectric interface to confine the light. Simulations are performed using a finite-difference time-domain (FDTD) method on a realistic 1.75-mum pixel model for on-axis as well as angled incidence. We evaluate the optical efficiency and spatial crosstalk performance of these methods compared to a reference pixel and find significant (10%) improvement for the TIR designs with properly chosen parameters and nearly full spatial crosstalk elimination using metal to confine the light. We also show that these improvements are comparable to those achieved by thinning the image sensor stack. PMID:19065184

  4. Analyzing refractive index profiles of confined fluids by interferometry part II: Multilayer and asymmetric systems.

    PubMed

    Kienle, Daniel F; Kuhl, Tonya L

    2016-09-14

    Methods for determining the substrate properties and the optical thickness of thin films or any variation in the refractive index of a fluid or film near a surface for unknown 5-layer symmetric and 3-layer asymmetric interferometers are presented. Both systems can be fully resolved without any known layer properties and without contact or confining the films. The method was tested using realistic simulated interferometer data, and was found to consistently yield accurate values for all desired properties. The method was experimentally validated through analysis of an asymmetric three layer interferometer system of linear polyethyleneimine (LPEI) adsorbed onto mica substrates of differing thickness and identical refractive index. The results were in excellent agreement with the dry polymer film properties measured using conventional SFA contact measurements. More complicated systems were also evaluated for feasibility, and any additional parameter specifications required for analysis were determined. The utility of this method is broad, as a single experiment in a laboratory setting can independently provide non-contact film properties and the effects of confinement on the film structure, which can be correlated to a simultaneously measured interaction force profile. PMID:27566361

  5. Comments on experimental results of energy confinement of tokamak plasmas

    SciTech Connect

    Chu, T.K.

    1989-04-01

    The results of energy-confinement experiments on steady-state tokamak plasmas are examined. For plasmas with auxiliary heating, an analysis based on the heat diffusion equation is used to define heat confinement time (the incremental energy confinement time). For ohmically sustained plasmas, experiments show that the onset of the saturation regime of energy confinement, marfeing, detachment, and disruption are marked by distinct values of the parameter /bar n//sub e///bar j/. The confinement results of the two types of experiments can be described by a single surface in 3-dimensional space spanned by the plasma energy, the heating power, and the plasma density: the incremental energy confinement time /tau//sub inc/ = ..delta..W/..delta..P is the correct concept for describing results of heat confinement in a heating experiment; the commonly used energy confinement time defined by /tau//sub E/ = W/P is not. A further examination shows that the change of edge parameters, as characterized by the change of the effective collision frequency ..nu../sub e/*, governs the change of confinement properties. The totality of the results of tokamak experiments on energy confinement appears to support a hypothesis that energy transport is determined by the preservation of the pressure gradient scale length. 70 refs., 6 figs., 1 tab.

  6. Fire Risk Analysis for Armenian NPP Confinement

    SciTech Connect

    Poghosyan, Shahen; Malkhasyan, Albert; Bznuni, Surik; Amirjanyan, Armen

    2006-07-01

    Major fire occurred at Armenian NPP (ANPP) in October 1982 showed that fire-induced initiating events (IE) can have dominant contribution in overall risk of core damage. Probabilistic Safety Assessment study for fire-induced initiating events for ANPP was initiated in 2002. Analysis was performed for compartments fires in which could result in failure of components which are necessary for reactor cold shutdown. Analysis shows that main risk from fire at ANPP is conditioned by fire in cable tunnels 61-64. Meanwhile fire in confinement compartments don't have significant contribution to overall risk of core damage. The exception is so called 'confinement valves compartment' (room no.A-013/2) fire (more than 7.5% of CDF) in which fire could result in the loss of coolant accident with unavailability of primary makeup system, which directly leads to core damage. Detailed analysis of this problem that is common for typical WWER-440/230 reactors with no hermetic MCPs and recommendations for solution are presented in this paper. (authors)

  7. Hierarchical wrinkling in a confined permeable biogel

    PubMed Central

    Leocmach, Mathieu; Nespoulous, Mathieu; Manneville, Sébastien; Gibaud, Thomas

    2015-01-01

    Confined thin surfaces may wrinkle as a result of the growth of excess material. Elasticity or gravity usually sets the wavelength. We explore new selection mechanisms based on hydrodynamics. First, inspired by yoghurt-making processes, we use caseins (a family of milk proteins) as pH-responsive building blocks and the acidulent glucono-δ-lactone to design a porous biogel film immersed in a confined buoyancy-matched viscous medium. Under specific boundary conditions yet without any external stimulus, the biogel film spontaneously wrinkles in cascade. Second, using a combination of titration, rheology, light microscopy, and confocal microscopy, we demonstrate that, during continuous acidification, the gel first shrinks and then swells, inducing wrinkling. Third, taking into account both Darcy flow through the gel and Poiseuille flow in the surrounding solvent, we develop a model that correctly predicts the wrinkling wavelength. Our results should be universal for acid-induced protein gels because they are based on pH-induced charge stabilization/destabilization and therefore could set a benchmark to gain fundamental insights into wrinkled biological tissues, to texture food, or to design surfaces for optical purposes. PMID:26601296

  8. Confinement Effects on Polymer Morphology and Properties

    NASA Astrophysics Data System (ADS)

    Anastasiadis, Spiros H.; Chrissopoulou, Kiriaki; Perivolari, Elena; Papananou, Hellen

    The behavior of polymers restricted in space or to surfaces/interfaces can be very different from that in the bulk. In this work, we investigate the morphology and thermal properties of poly(ethylene oxide), PEO, in nanohybrids containing two kinds of silica nanoparticles of largely different sizes in an attempt to bridge the case of severely confined polymers within the galleries of layered silicates with that of polymer-single nanoparticle nanocomposites. Hybrids with different ratio between the two silica nanoparticles were prepared in order to increase the level of confinement. The good dispersion of the nanoparticles was verified by transmission electron microscopy whereas the morphology and crystallization behavior were investigated with X-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry and polarised optical microscopy. The polymer behavior in the three component systems is found indeed intermediate between that of PEO/montmorillonite and that of PEO/silica with a single-size particles. Moreover, the behavior can be tuned by varying the ratio of the large to the small nanoparticles. This research has been partially supported by the European Union's Horizon 2020 research and innovation programme (NFFA Europe -Grant Agreement No. 654360).

  9. Using Quantum Confinement to Uniquely Identify Devices.

    PubMed

    Roberts, J; Bagci, I E; Zawawi, M A M; Sexton, J; Hulbert, N; Noori, Y J; Young, M P; Woodhead, C S; Missous, M; Migliorato, M A; Roedig, U; Young, R J

    2015-01-01

    Modern technology unintentionally provides resources that enable the trust of everyday interactions to be undermined. Some authentication schemes address this issue using devices that give a unique output in response to a challenge. These signatures are generated by hard-to-predict physical responses derived from structural characteristics, which lend themselves to two different architectures, known as unique objects (UNOs) and physically unclonable functions (PUFs). The classical design of UNOs and PUFs limits their size and, in some cases, their security. Here we show that quantum confinement lends itself to the provision of unique identities at the nanoscale, by using fluctuations in tunnelling measurements through quantum wells in resonant tunnelling diodes (RTDs). This provides an uncomplicated measurement of identity without conventional resource limitations whilst providing robust security. The confined energy levels are highly sensitive to the specific nanostructure within each RTD, resulting in a distinct tunnelling spectrum for every device, as they contain a unique and unpredictable structure that is presently impossible to clone. This new class of authentication device operates with minimal resources in simple electronic structures above room temperature. PMID:26553435

  10. Glassy dynamics in a confined monatomic fluid

    NASA Astrophysics Data System (ADS)

    Krishnan, S. H.; Ayappa, K. G.

    2012-07-01

    Molecular dynamic simulations of a strongly inhomogeneous system reveals that a single-component soft-sphere fluid can behave as a fragile glass former due to confinement. The self-intermediate scattering function, Fs(k,t), of a Lennard-Jones fluid confined in slit-shaped pores, which can accomodate two to four fluid layers, exhibits a two-step relaxation at moderate temperatures. The mean-squared displacement data are found to follow time-temperature superposition and both the self-diffusivity and late α relaxation times exhibit power-law divergences as the fluid is cooled. The system possesses a crossover temperature and follows the scalings of mode coupling theory for the glass transition. The temperature dependence of the self-diffusivity can be expressed using the Vogel-Fulcher-Tammann equation, and estimates of the fragility index of the system indicates a fragile glass former. At lower temperatures, signatures of additional relaxation processes are observed in the various dynamical quantities with a three-step relaxation observed in the Fs(k,t).

  11. Polymer escape from a confining potential

    SciTech Connect

    Mökkönen, Harri; Ikonen, Timo; Jónsson, Hannes; Ala-Nissila, Tapio

    2014-02-07

    The rate of escape of polymers from a two-dimensionally confining potential well has been evaluated using self-avoiding as well as ideal chain representations of varying length, up to 80 beads. Long timescale Langevin trajectories were calculated using the path integral hyperdynamics method to evaluate the escape rate. A minimum is found in the rate for self-avoiding polymers of intermediate length while the escape rate decreases monotonically with polymer length for ideal polymers. The increase in the rate for long, self-avoiding polymers is ascribed to crowding in the potential well which reduces the free energy escape barrier. An effective potential curve obtained using the centroid as an independent variable was evaluated by thermodynamic averaging and Kramers rate theory then applied to estimate the escape rate. While the qualitative features are well reproduced by this approach, it significantly overestimates the rate, especially for the longer polymers. The reason for this is illustrated by constructing a two-dimensional effective energy surface using the radius of gyration as well as the centroid as controlled variables. This shows that the description of a transition state dividing surface using only the centroid fails to confine the system to the region corresponding to the free energy barrier and this problem becomes more pronounced the longer the polymer is. A proper definition of a transition state for polymer escape needs to take into account the shape as well as the location of the polymer.

  12. Confinement and localization on domain walls

    NASA Astrophysics Data System (ADS)

    Auzzi, R.; Bolognesi, S.; Shifman, M.; Yung, A.

    2009-02-01

    We continue the studies of localization of the U(1) gauge fields on domain walls. Depending on dynamics of the bulk theory the gauge field localized on the domain wall can be either in the Coulomb phase or squeezed into flux tubes implying (Abelian) confinement of probe charges on the wall along the wall surface. First, we consider a simple toy model with one flavor in the bulk at weak coupling (a minimal model) realizing the latter scenario. We then suggest a model presenting an extension of the Seiberg-Witten theory which is at strong coupling, but all theoretical constructions are under full control if we base our analysis on a dual effective action. Finally, we compare our findings with the wall in a “nonminimal” theory with two distinct quark flavors that had been studied previously. In this case the U(1) gauge field trapped on the wall is exactly massless because it is the Goldstone boson of a U(1) symmetry in the bulk spontaneously broken on the wall. The theory on the wall is in the Coulomb phase. We explain why the mechanism of confinement discussed in the first part of the paper does not work in this case, and strings are not formed on the walls.

  13. Quantum chromodynamics near the confinement limit

    SciTech Connect

    Quigg, C.

    1985-09-01

    These nine lectures deal at an elementary level with the strong interaction between quarks and its implications for the structure of hadrons. Quarkonium systems are studied as a means for measuring the interquark interaction. This is presumably (part of) the answer a solution to QCD must yield, if it is indeed the correct theory of the strong interactions. Some elements of QCD are reviewed, and metaphors for QCD as a confining theory are introduced. The 1/N expansion is summarized as a way of guessing the consequences of QCD for hadron physics. Lattice gauge theory is developed as a means for going beyond perturbation theory in the solution of QCD. The correspondence between statistical mechanics, quantum mechanics, and field theory is made, and simple spin systems are formulated on the lattice. The lattice analog of local gauge invariance is developed, and analytic methods for solving lattice gauge theory are considered. The strong-coupling expansion indicates the existence of a confining phase, and the renormalization group provides a means for recovering the consequences of continuum field theory. Finally, Monte Carlo simulations of lattice theories give evidence for the phase structure of gauge theories, yield an estimate for the string tension characterizing the interquark force, and provide an approximate description of the quarkonium potential in encouraging good agreement with what is known from experiment.

  14. Confined superadiabatic premixed flame-flow interaction

    SciTech Connect

    Najm, H.N.

    1995-12-31

    Laminar premixed unity-Lewis number flames are studied numerically, to examine flow-flame interaction in a two-dimensional closed domain. Two opposed planar flame fronts are perturbed sinusoidally and allowed to develop by consuming premixed reactants. Combustion heat release leads to global pressure and temperature rise in the domain, due to confinement. A superadiabatic condition, with products temperature rising with distance behind the flame front, is observed due to stagnation pressure rise. Variations in tangential strain rate behind the perturbed flame fronts, due to flame curvature and heat release, result in a modified local superadiabatic temperature gradient in the products. These variations in temperature gradients are shown to determine the net local confinement-heating rate in the products, leading to corresponding deviations in products temperature, and the local reaction rate along the flame front. These observations, which are not consistent with one-dimensional superadiabatic stagnation flame behavior, are a direct result of the unrestrained unsteady nature of two-dimensional flame-flow interaction.

  15. Nematode locomotion in unconfined and confined fluids

    NASA Astrophysics Data System (ADS)

    Bilbao, Alejandro; Wajnryb, Eligiusz; Vanapalli, Siva A.; Blawzdziewicz, Jerzy

    2013-08-01

    The millimeter-long soil-dwelling nematode Caenorhabditis elegans propels itself by producing undulations that propagate along its body and turns by assuming highly curved shapes. According to our recent study [V. Padmanabhan et al., PLoS ONE 7, e40121 (2012), 10.1371/journal.pone.0040121] all these postures can be accurately described by a piecewise-harmonic-curvature model. We combine this curvature-based description with highly accurate hydrodynamic bead models to evaluate the normalized velocity and turning angles for a worm swimming in an unconfined fluid and in a parallel-wall cell. We find that the worm moves twice as fast and navigates more effectively under a strong confinement, due to the large transverse-to-longitudinal resistance-coefficient ratio resulting from the wall-mediated far-field hydrodynamic coupling between body segments. We also note that the optimal swimming gait is similar to the gait observed for nematodes swimming in high-viscosity fluids. Our bead models allow us to determine the effects of confinement and finite thickness of the body of the nematode on its locomotion. These effects are not accounted for by the classical resistive-force and slender-body theories.

  16. Viscosity of confined inhomogeneous nonequilibrium fluids

    NASA Astrophysics Data System (ADS)

    Zhang, Junfang; Todd, B. D.; Travis, Karl P.

    2004-12-01

    We use the nonlocal linear hydrodynamic constitutive model, proposed by Evans and Morriss [Statistical Mechanics of Nonequilibrium Liquids (Academic, London, 1990)], for computing an effective spatially dependent shear viscosity of inhomogeneous nonequilibrium fluids. The model is applied to a simple atomic fluid undergoing planar Poiseuille flow in a confined channel of several atomic diameters width. We compare the spatially dependent viscosity with a local generalization of Newton's law of viscosity and the Navier-Stokes viscosity, both of which are known to suffer extreme inaccuracies for highly inhomogeneous systems. The nonlocal constitutive model calculates effective position dependent viscosities that are free from the notorious singularities experienced by applying the commonly used local constitutive model. It is simple, general, and has widespread applicability in nanofluidics where experimental measurement of position dependent transport coefficients is currently inaccessible. In principle the method can be used to predict approximate flow profiles of any arbitrary inhomogeneous system. We demonstrate this by predicting the flow profile for a simple fluid undergoing planar Couette flow in a confined channel of several atomic diameters width.

  17. Congestion and communication in confined ant traffic

    NASA Astrophysics Data System (ADS)

    Gravish, Nick; Gold, Gregory; Zangwill, Andrew; Goodisman, Michael A. D.; Goldman, Daniel I.

    2014-03-01

    Many social animals move and communicate within confined spaces. In subterranean fire ants Solenopsis invicta, mobility within crowded nest tunnels is important for resource and information transport. Within confined tunnels, communication and traffic flow are at odds: trafficking ants communicate through tactile interactions while stopped, yet ants that stop to communicate impose physical obstacles on the traffic. We monitor the bi-directional flow of fire ant workers in laboratory tunnels of varied diameter D. The persistence time of communicating ant aggregations, τ, increases approximately linearly with the number of participating ants, n. The sensitivity of traffic flow increases as D decreases and diverges at a minimum diameter, Dc. A cellular automata model incorporating minimal traffic features--excluded volume and communication duration--reproduces features of the experiment. From the model we identify a competition between information transfer and the need to maintain jam-free traffic flow. We show that by balancing information transfer and traffic flow demands, an optimum group strategy exists which maximizes information throughput. We acknowledge funding from NSF PoLS #0957659 and #PHY-1205878.

  18. Viscosity of confined inhomogeneous nonequilibrium fluids.

    PubMed

    Zhang, Junfang; Todd, B D; Travis, Karl P

    2004-12-01

    We use the nonlocal linear hydrodynamic constitutive model, proposed by Evans and Morriss [Statistical Mechanics of Nonequilibrium Liquids (Academic, London, 1990)], for computing an effective spatially dependent shear viscosity of inhomogeneous nonequilibrium fluids. The model is applied to a simple atomic fluid undergoing planar Poiseuille flow in a confined channel of several atomic diameters width. We compare the spatially dependent viscosity with a local generalization of Newton's law of viscosity and the Navier-Stokes viscosity, both of which are known to suffer extreme inaccuracies for highly inhomogeneous systems. The nonlocal constitutive model calculates effective position dependent viscosities that are free from the notorious singularities experienced by applying the commonly used local constitutive model. It is simple, general, and has widespread applicability in nanofluidics where experimental measurement of position dependent transport coefficients is currently inaccessible. In principle the method can be used to predict approximate flow profiles of any arbitrary inhomogeneous system. We demonstrate this by predicting the flow profile for a simple fluid undergoing planar Couette flow in a confined channel of several atomic diameters width. PMID:15549963

  19. Thermodynamic properties of bulk and confined water

    SciTech Connect

    Mallamace, Francesco; Corsaro, Carmelo; Mallamace, Domenico; Vasi, Sebastiano; Vasi, Cirino; Stanley, H. Eugene

    2014-11-14

    The thermodynamic response functions of water display anomalous behaviors. We study these anomalous behaviors in bulk and confined water. We use nuclear magnetic resonance (NMR) to examine the configurational specific heat and the transport parameters in both the thermal stable and the metastable supercooled phases. The data we obtain suggest that there is a behavior common to both phases: that the dynamics of water exhibit two singular temperatures belonging to the supercooled and the stable phase, respectively. One is the dynamic fragile-to-strong crossover temperature (T{sub L} ≃ 225 K). The second, T{sup *} ∼ 315 ± 5 K, is a special locus of the isothermal compressibility K{sub T}(T, P) and the thermal expansion coefficient α{sub P}(T, P) in the P–T plane. In the case of water confined inside a protein, we observe that these two temperatures mark, respectively, the onset of protein flexibility from its low temperature glass state (T{sub L}) and the onset of the unfolding process (T{sup *})

  20. Emergent phenomena in manganites under spatial confinement

    NASA Astrophysics Data System (ADS)

    Shen, Jian; Z. Ward, T.; F. Yin, L.

    2013-01-01

    It is becoming increasingly clear that the exotic properties displayed by correlated electronic materials such as high-Tc superconductivity in cuprates, colossal magnetoresistance (CMR) in manganites, and heavy-fermion compounds are intimately related to the coexistence of competing nearly degenerate states which couple simultaneously active degrees of freedom—charge, lattice, orbital, and spin states. The striking phenomena associated with these materials are due in a large part to spatial electronic inhomogeneities, or electronic phase separation (EPS). In many of these hard materials, the functionality is a result of the soft electronic component that leads to self-organization. In this paper, we review our recent work on a novel spatial confinement technique that has led to some fascinating new discoveries about the role of EPS in manganites. Using lithographic techniques to confine manganite thin films to length scales of the EPS domains that reside within them, it is possible to simultaneously probe EPS domains with different electronic states. This method allows for a much more complete view of the phases residing in a material and gives vital information on phase formation, movement, and fluctuation. Pushing this trend to its limit, we propose to control the formation process of the EPS using external local fields, which include magnetic exchange field, strain field, and electric field. We term the ability to pattern EPS “electronic nanofabrication." This method allows us to control the global physical properties of the system at a very fundamental level, and greatly enhances the potential for realizing true oxide electronics.

  1. Polymer escape from a confining potential

    NASA Astrophysics Data System (ADS)

    Mökkönen, Harri; Ikonen, Timo; Jónsson, Hannes; Ala-Nissila, Tapio

    2014-02-01

    The rate of escape of polymers from a two-dimensionally confining potential well has been evaluated using self-avoiding as well as ideal chain representations of varying length, up to 80 beads. Long timescale Langevin trajectories were calculated using the path integral hyperdynamics method to evaluate the escape rate. A minimum is found in the rate for self-avoiding polymers of intermediate length while the escape rate decreases monotonically with polymer length for ideal polymers. The increase in the rate for long, self-avoiding polymers is ascribed to crowding in the potential well which reduces the free energy escape barrier. An effective potential curve obtained using the centroid as an independent variable was evaluated by thermodynamic averaging and Kramers rate theory then applied to estimate the escape rate. While the qualitative features are well reproduced by this approach, it significantly overestimates the rate, especially for the longer polymers. The reason for this is illustrated by constructing a two-dimensional effective energy surface using the radius of gyration as well as the centroid as controlled variables. This shows that the description of a transition state dividing surface using only the centroid fails to confine the system to the region corresponding to the free energy barrier and this problem becomes more pronounced the longer the polymer is. A proper definition of a transition state for polymer escape needs to take into account the shape as well as the location of the polymer.

  2. Edge states in confined active fluids

    NASA Astrophysics Data System (ADS)

    Souslov, Anton; Vitelli, Vincenzo

    Recently, topologically protected edge modes have been proposed and realized in both mechanical and acoustic metamaterials. In one class of such metamaterials, Time-Reversal Symmetry is broken, and, to achieve this TRS breaking in mechanical and acoustic systems, an external energy input must be used. For example, motors provide a driving force that uses energy and, thus, explicitly break TRS. As a result, motors have been used as an essential component in the design of topological metamaterials. By contrast, we explore the design of topological metamaterials that use a class of far-from-equilibrium liquids, called polar active liquids, that spontaneously break TRS. We thus envision the confinement of a polar active liquid to a prescribed geometry in order to realize topological order with broken time-reversal symmetry. We address the design of the requisite geometries, for example a regular honeycomb lattice composed of annular channels, in which the active liquid may be confined. We also consider the physical character of the active liquid that, when introduced into the prescribed geometry, will spontaneously form the flow pattern of a metamaterial with topologically protected edge states. Finally, we comment on potential experimental realizations of such metamaterials.

  3. Confined PBX 9501 gap reinitiation studies

    SciTech Connect

    Salyer, Terry R; Hill, Larry G; Lam, Kin

    2009-01-01

    For explosive systems that exhibit gaps or cracks between their internal components (either by design or mechanical failure), measurable time delays exist for detonation waves crossing them. Reinitiation across such gaps is dependent on the type of explosive, gap width, gap morphology, confinement, and temperature effects. To examine this reinitiation effect, a series of tests has been conducted to measure the time delay across a prescribed gap within an 'infinitely' confined PBX 9501 system. Detonation breakout along the explosive surface is measured with a streak camera, and flow features are examined during reinitiation near the gap. Such tests allow for quantitative determination of the time delay corresponding to the time of initiation across a given gap oriented normal to the direction of the detonation wave. Measured time delays can be compared with numerical calculations, making it possible to validate initiation models as well as estimate detonation run-up distances. Understanding this reinitiation behavior is beneficial for the design and evaluation of explosive systems that require precision timing and performance.

  4. Using Quantum Confinement to Uniquely Identify Devices

    NASA Astrophysics Data System (ADS)

    Roberts, J.; Bagci, I. E.; Zawawi, M. A. M.; Sexton, J.; Hulbert, N.; Noori, Y. J.; Young, M. P.; Woodhead, C. S.; Missous, M.; Migliorato, M. A.; Roedig, U.; Young, R. J.

    2015-11-01

    Modern technology unintentionally provides resources that enable the trust of everyday interactions to be undermined. Some authentication schemes address this issue using devices that give a unique output in response to a challenge. These signatures are generated by hard-to-predict physical responses derived from structural characteristics, which lend themselves to two different architectures, known as unique objects (UNOs) and physically unclonable functions (PUFs). The classical design of UNOs and PUFs limits their size and, in some cases, their security. Here we show that quantum confinement lends itself to the provision of unique identities at the nanoscale, by using fluctuations in tunnelling measurements through quantum wells in resonant tunnelling diodes (RTDs). This provides an uncomplicated measurement of identity without conventional resource limitations whilst providing robust security. The confined energy levels are highly sensitive to the specific nanostructure within each RTD, resulting in a distinct tunnelling spectrum for every device, as they contain a unique and unpredictable structure that is presently impossible to clone. This new class of authentication device operates with minimal resources in simple electronic structures above room temperature.

  5. Thermodynamic properties of bulk and confined water

    NASA Astrophysics Data System (ADS)

    Mallamace, Francesco; Corsaro, Carmelo; Mallamace, Domenico; Vasi, Sebastiano; Vasi, Cirino; Stanley, H. Eugene

    2014-11-01

    The thermodynamic response functions of water display anomalous behaviors. We study these anomalous behaviors in bulk and confined water. We use nuclear magnetic resonance (NMR) to examine the configurational specific heat and the transport parameters in both the thermal stable and the metastable supercooled phases. The data we obtain suggest that there is a behavior common to both phases: that the dynamics of water exhibit two singular temperatures belonging to the supercooled and the stable phase, respectively. One is the dynamic fragile-to-strong crossover temperature (TL ≃ 225 K). The second, T* ˜ 315 ± 5 K, is a special locus of the isothermal compressibility KT(T, P) and the thermal expansion coefficient αP(T, P) in the P-T plane. In the case of water confined inside a protein, we observe that these two temperatures mark, respectively, the onset of protein flexibility from its low temperature glass state (TL) and the onset of the unfolding process (T*).

  6. Polymer ejection from strong spherical confinement

    NASA Astrophysics Data System (ADS)

    Piili, J.; Linna, R. P.

    2015-12-01

    We examine the ejection of an initially strongly confined flexible polymer from a spherical capsid through a nanoscale pore. We use molecular dynamics for unprecedentedly high initial monomer densities. We show that the time for an individual monomer to eject grows exponentially with the number of ejected monomers. By measurements of the force at the pore we show this dependence to be a consequence of the excess free energy of the polymer due to confinement growing exponentially with the number of monomers initially inside the capsid. This growth relates closely to the divergence of mixing energy in the Flory-Huggins theory at large concentration. We show that the pressure inside the capsid driving the ejection dominates the process that is characterized by the ejection time growing linearly with the lengths of different polymers. Waiting time profiles would indicate that the superlinear dependence obtained for polymers amenable to computer simulations results from a finite-size effect due to the final retraction of polymers' tails from capsids.

  7. Using Quantum Confinement to Uniquely Identify Devices

    PubMed Central

    Roberts, J.; Bagci, I. E.; Zawawi, M. A. M.; Sexton, J.; Hulbert, N.; Noori, Y. J.; Young, M. P.; Woodhead, C. S.; Missous, M.; Migliorato, M. A.; Roedig, U.; Young, R. J.

    2015-01-01

    Modern technology unintentionally provides resources that enable the trust of everyday interactions to be undermined. Some authentication schemes address this issue using devices that give a unique output in response to a challenge. These signatures are generated by hard-to-predict physical responses derived from structural characteristics, which lend themselves to two different architectures, known as unique objects (UNOs) and physically unclonable functions (PUFs). The classical design of UNOs and PUFs limits their size and, in some cases, their security. Here we show that quantum confinement lends itself to the provision of unique identities at the nanoscale, by using fluctuations in tunnelling measurements through quantum wells in resonant tunnelling diodes (RTDs). This provides an uncomplicated measurement of identity without conventional resource limitations whilst providing robust security. The confined energy levels are highly sensitive to the specific nanostructure within each RTD, resulting in a distinct tunnelling spectrum for every device, as they contain a unique and unpredictable structure that is presently impossible to clone. This new class of authentication device operates with minimal resources in simple electronic structures above room temperature. PMID:26553435

  8. Regimes of DNA confined in a nanochannel

    NASA Astrophysics Data System (ADS)

    Dai, Liang; Doyle, Patrick

    2014-03-01

    Scaling regimes for polymers confined to tubular channels are well established when the channel cross-sectional dimension is either very small (Odjik regime) or large (classic de Gennes regime) relative to the polymer Kuhn length. In the literature, there is no clear consensus regarding the intermediate region and if subregimes even exist to connect these two classic bounding regimes. The confluence of emerging single DNA mapping technologies and a resurged interest in the fundamental properties of confined polymers has led to extensive research in this area using DNA as a model system. Due to the DNA molecule's properties and limitations of nanofabrication, most experiments are performed in this intermediate regime with channel dimensions of a few Kuhn lengths. Here we use simulations and theory to reconcile conflicting theories and show that there are indeed extended de Gennes, partial alignment and hairpin regimes located between the two classic regimes. Simulations results for both chain extension and free energy support the existence of these regimes. This research was supported by the National Research Foundation Singapore through the Singapore MIT Alliance for Research and Technology's research program in BioSystems and Micromechanics, the National Science Foundation (CBET-1335938).

  9. Tgermonuclear Ignition in Inertial Confinement Fusion and Comparison with Magnetic Confinement

    SciTech Connect

    Betti, R.; Chang, P.Y.; Spears, B.K.; Anderson, K.S.; Edwards, J.; Fatenejad, M.; Lindl, J.D.; McCrory, R.L.; Nora, R.; Shvarts, D.

    2010-04-23

    The physics of thermonuclear ignition in inertial confinement fusion (ICF) is presented in the familiar frame of a Lawson-type criterion. The product of the plasma pressure and confinement time Ptau for ICF is cast in terms of measurable parameters and its value is estimated for cryogenic implosions. An overall ignition parameter chi including pressure, confinement time, and temperature is derived to complement the product Ptau. A metric for performance assessment should include both chi and Ptau. The ignition parameter and the product Ptau are compared between inertial and magnetic-confinement fusion. It is found that cryogenic implosions on OMEGA [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] have achieved Ptau ~ 1.5 atm s comparable to large tokamaks such as the Joint European Torus [P. H. Rebut and B. E. Keen, Fusion Technol. 11, 13 (1987)] where Ptau ~ 1 atm s. Since OMEGA implosions are relatively cold (T ~ 2 keV), their overall ignition parameter chi ~ 0.02–0.03 is ~5X lower than in JET (chi ~ 0.13), where the average temperature is about 10 keV.

  10. Thermonuclear ignition in inertial confinement fusion and comparison with magnetic confinement

    SciTech Connect

    Betti, R.; Chang, P. Y.; Anderson, K. S.; Nora, R.; Spears, B. K.; Edwards, J.; Lindl, J. D.; Fatenejad, M.; McCrory, R. L.; Shvarts, D.

    2010-05-15

    The physics of thermonuclear ignition in inertial confinement fusion (ICF) is presented in the familiar frame of a Lawson-type criterion. The product of the plasma pressure and confinement time Ptau for ICF is cast in terms of measurable parameters and its value is estimated for cryogenic implosions. An overall ignition parameter chi including pressure, confinement time, and temperature is derived to complement the product Ptau. A metric for performance assessment should include both chi and Ptau. The ignition parameter and the product Ptau are compared between inertial and magnetic-confinement fusion. It is found that cryogenic implosions on OMEGA[T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] have achieved Ptauapprox1.5 atm s comparable to large tokamaks such as the Joint European Torus [P. H. Rebut and B. E. Keen, Fusion Technol. 11, 13 (1987)] where Ptauapprox1 atm s. Since OMEGA implosions are relatively cold (Tapprox2 keV), their overall ignition parameter chiapprox0.02-0.03 is approx5x lower than in JET (chiapprox0.13), where the average temperature is about 10 keV.

  11. Impurity confinement and transport in high confinement regimes without edge localized modes on DIII-D

    SciTech Connect

    Grierson, B. A. Nazikian, R. M.; Solomon, W. M.; Burrell, K. H.; Garofalo, A. M.; Belli, E. A.; Staebler, G. M.; Evans, T. E.; Smith, S. P.; Chrobak, C.; Fenstermacher, M. E.; McKee, G. R.; Orlov, D. M.; Chrystal, C.

    2015-05-15

    Impurity transport in the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] is investigated in stationary high confinement (H-mode) regimes without edge localized modes (ELMs). In plasmas maintained by resonant magnetic perturbation (RMP), ELM-suppression, and QH-mode, the confinement time of fluorine (Z = 9) is equivalent to that in ELMing discharges with 40 Hz ELMs. For selected discharges with impurity injection, the impurity particle confinement time compared to the energy confinement time is in the range of τ{sub p}/τ{sub e}≈2−3. In QH-mode operation, the impurity confinement time is shown to be smaller for intense, coherent magnetic, and density fluctuations of the edge harmonic oscillation than weaker fluctuations. Transport coefficients are derived from the time evolution of the impurity density profile and compared to neoclassical and turbulent transport models NEO and TGLF. Neoclassical transport of fluorine is found to be small compared to the experimental values. In the ELMing and RMP ELM-suppressed plasma, the impurity transport is affected by the presence of tearing modes. For radii larger than the mode radius, the TGLF diffusion coefficient is smaller than the experimental value by a factor of 2–3, while the convective velocity is within error estimates. Low levels of diffusion are observed for radii smaller than the tearing mode radius. In the QH-mode plasma investigated, the TGLF diffusion coefficient is higher inside of ρ=0.4 and lower outside of 0.4 than the experiment, and the TGLF convective velocity is more negative by a factor of approximately 1.7.

  12. Narrative survival: personal and institutional accounts of asylum confinement.

    PubMed

    Hanganu-Bresch, Cristina; Berkenkotter, Carol

    2012-01-01

    This essay has been conceptually eclectic in that we have integrated concepts from genre theory and discourse analysis. In our interpretation of Merivale and Marshall's narratives, we have also drawn upon Frye's Anatomy of criticism, a canonical text in literary genre theory. Such an eclectic approach seems warranted by both the contextual and textual features of Merivale's and Marshall's narratives, and in particular by Merivale's use of Mennipean satire with its encyclopedic detail. In our discussion of Merivale and Marshall's Admissions Records we have drawn on speech act theory to suggest that the Order (to admit a patient), the two medical certificates that follow, and finally, the notice to admit a patient constitute a constellation of texts, a genre suite, with a powerful illocutionary force. These texts are the prelude to and the means of confinement; they are both act and process. At the heart of our comparison of the asylum records of Merivale and Marshall with their "survivor narratives" is our analytic conclusion that the Ticehurst case histories can be said to constitute a linear "chronicle" of what Hayes Newington, the writer of the two case histories observed and inferred about his two patients. As chronicles, the Ticehurst Asylum case histories are linear representations or realistic accounts. As such, these archival documents provide a genuine insight into the "ways that that reality offers itself to perception". The institutional accounts exist in--and mark a--"flat time," equalized by each dated entry depicting the writer's mechanical act of observing/noting in brief, stereotypical sentences, e.g., "Patient is better [or, conversely, no] better today." We dubbed this metronomic time: beating regularly and evenly, flattening out the individual trajectories of each patient's illness. Metronomic time is normative. Each beat is calculated precisely to be the same as next. The dispassionate nature of clinical observations and the metronymic rhythms of

  13. Simulation of Ions Confined by Quadrupole Electric Fields

    NASA Astrophysics Data System (ADS)

    Cummings, Michael David

    Computer simulations are routinely used to develop physical insight into ionic systems confined by static and time-varying quadrupole electric fields. However, after nearly 30 years of numerical exploration, three questions remain: which numerical techniques produce accurate simulations for the least computational expense? How can thermal equilibrium initial conditions be generated? How should temperature be calculated? Trapped ion simulations generally employ molecular dynamics techniques, where ion trajectories are numerically calculated at discrete points in time. While many numerical methods have been applied to these systems, it is unclear which technique is fastest or what time-step is required. In this work, the computational speed of and time-step for 11 commonly used techniques are assessed through analysis of four numerical error components. The most rapid method and required step-size depend strongly on the system parameters, with any one of the Beeman, Gear6, 5th-order Adams-Bashforth-Moulton, or 4th-order Runge-Kutta algorithms proving most appropriate. The 11 algorithms are then applied to a realistic multi-ion system and verify that the four tests accurately predict the required step size. When equilibrium properties are desired, simulations should commence from initial conditions that conform closely to thermal equilibrium; however little has been published on initial condition generation and assessment for the multi-ion system. A method is presented for generating thermal equilibrium via laser cooling and recoil heating, a ramp-down stage, where the heating and cooling are gradually reduced, and an equilibration phase where the ensemble is evolved under only the trapping forces. Furthermore, it is demonstrated that thermal equilibrium can be assessed using well-known tests of distribution normality. When time-varying fields are present, temperature calculation becomes difficult, as the ion motion contains both thermal and nonthermal components. The

  14. Diffusion of micrometer-sized soft particles in confinement

    NASA Astrophysics Data System (ADS)

    Jordan, Benjamin; Aptowicz, Kevin

    We investigate the diffusion of micrometer sized poly(N-isopropylacrylamide) (PNIPAM) gel particles in confinement. The influence of confinement on the transport of small particles is becoming increasingly important for microfluidics and bio-fluidics. Analytical solutions to this problem are limited to very unique geometries or gross approximations. Computational methods have provided more insight into the problem as well as experimental investigations. However, most research has focused on the hard-sphere problem. In this work, we will explore the diffusion of soft particles in confinement. The dynamics of the particles confined between two parallel walls is captured with video-microscopy. In addition, we use a recently developed technique to measurement confinement of particles in-situ with a precision of 1%. This poster will present some preliminary results of how confinement affects the diffusion of these soft particles. We acknowledge support from Grant DMR-1206231.

  15. Neutron Assay System for Confinement Vessel Disposition

    SciTech Connect

    Frame, Katherine C; Bourne, Mark M; Crooks, William J; Evans, Louise; Mayo, Douglas R; Miko, David K; Salazar, William R; Stange, Sy; Valdez, Jose I; Vigil, Georgiana M

    2012-07-13

    Waste will be removed from confinement vessels remaining from 1970s-era experiments. Los Alamos has 9+ spherical confinement vessels remaining from experiments. Each vessel contains {approx} 500 lbs of radioactive debris such as actinide metals and oxides, metals, powdered silica, graphite, and wires and hardware. In order to dispose of the vessels, debris and contamination must be removed. Neutron assay system was designed to assay vessels before and after cleanout. System requirements are: (1) Modular and moveable; (2) Capable of detecting {approx}100g {sup 239}Pu equivalent in a 2-inch thick steel sphere with 6 foot diameter; and (3) Capable of safeguards-quality assays. Initial design parameters arethe use of 4-atm {sup 3}He tubes with length of 6 feet, and {sup 3}He tubes embedded in polyethelene for moderation. This paper describes the calibration of the Confinement Vessel Assay System (CVAS) and quantification of its uncertainties. Assay uncertainty depends on five factors: (1) Statistical uncertainty in the assay measurement; (2) Statistical uncertainty in the background measurement; (3) Statistical uncertainty in the isotopics determination - This should be much smaller than the other uncertainties; (4) Systematic uncertainty due to position bias; and (5) Systematic uncertainty due to fluctuations in cosmic ray spallation. This one can be virtually eliminated by performing the background measurement with an empty vessel - but that may not be possible. We used modeling and experiments to quantify the systematic uncertainties. The calibration assumes a uniform distribution of material, but reality will be different. MCNPX modeling was used to quantify the positional bias. The model was benchmarked to build confidence in its results. Material at top of vessel is 44% greater than amount assayed, according to singles. Material near 19-tube detector is 38% less than amount assayed, according to singles. Cosmic ray spallation contributes significantly to the

  16. Confinement and Tritium Stripping Systems for APT Tritium Processing

    SciTech Connect

    Hsu, R.H.; Heung, L.K.

    1997-10-20

    This report identifies functions and requirements for the tritium process confinement and clean-up system (PCCS) and provides supporting technical information for the selection and design of tritium confinement, clean-up (stripping) and recovery technologies for new tritium processing facilities in the Accelerator for the Production of Tritium (APT). The results of a survey of tritium confinement and clean-up systems for large-scale tritium handling facilities and recommendations for the APT are also presented.

  17. Realistic Hot Water Draw Specification for Rating Solar Water Heaters: Preprint

    SciTech Connect

    Burch, J.

    2012-06-01

    In the United States, annual performance ratings for solar water heaters are simulated, using TMY weather and specified water draw. A more-realistic ratings draw is proposed that eliminates most bias by improving mains inlet temperature and by specifying realistic hot water use. This paper outlines the current and the proposed draws and estimates typical ratings changes from draw specification changes for typical systems in four cities.

  18. Can realistic interaction be useful for nuclear mean-field approaches?

    NASA Astrophysics Data System (ADS)

    Nakada, H.; Sugiura, K.; Inakura, T.; Margueron, J.

    2016-07-01

    Recent applications of the M3Y-type semi-realistic interaction to the nuclear mean-field approaches are presented: i) Prediction of magic numbers and ii) isotope shifts of nuclei with magic proton numbers. The results exemplify that the realistic interaction, which is derived from the bare 2 N and 3 N interaction, furnishes a new theoretical instrument for advancing nuclear mean-field approaches.

  19. Confinement dynamics of a semiflexible chain inside nano-spheres

    NASA Astrophysics Data System (ADS)

    Fathizadeh, A.; Heidari, Maziar; Eslami-Mossallam, B.; Ejtehadi, M. R.

    2013-07-01

    We study the conformations of a semiflexible chain, confined in nano-scaled spherical cavities, under two distinct processes of confinement. Radial contraction and packaging are employed as two confining procedures. The former method is performed by gradually decreasing the diameter of a spherical shell which envelopes a confined chain. The latter procedure is carried out by injecting the chain inside a spherical shell through a hole on the shell surface. The chain is modeled with a rigid body molecular dynamics simulation and its parameters are adjusted to DNA base-pair elasticity. Directional order parameter is employed to analyze and compare the confined chain and the conformations of the chain for two different sizes of the spheres are studied in both procedures. It is shown that for the confined chains in the sphere sizes of our study, they appear in spiral or tennis-ball structures, and the tennis-ball structure is more likely to be observed in more compact confinements. Our results also show that the dynamical procedure of confinement and the rate of the confinement are influential parameters of the structure of the chain inside spherical cavities.

  20. The cruel and unusual phenomenology of solitary confinement.

    PubMed

    Gallagher, Shaun

    2014-01-01

    What happens when subjects are deprived of intersubjective contact? This paper looks closely at the phenomenology and psychology of one example of that deprivation: solitary confinement. It also puts the phenomenology and psychology of solitary confinement to use in the legal context. Not only is there no consensus on whether solitary confinement is a "cruel and unusual punishment," there is no consensus on the definition of the term "cruel" in the use of that legal phrase. I argue that we can find a moral consensus on the meaning of "cruelty" by looking specifically at the phenomenology and psychology of solitary confinement. PMID:24971072