Science.gov

Sample records for reduction

  1. Nitrate reduction

    DOEpatents

    Dziewinski, Jacek J.; Marczak, Stanislaw

    2000-01-01

    Nitrates are reduced to nitrogen gas by contacting the nitrates with a metal to reduce the nitrates to nitrites which are then contacted with an amide to produce nitrogen and carbon dioxide or acid anions which can be released to the atmosphere. Minor amounts of metal catalysts can be useful in the reduction of the nitrates to nitrites. Metal salts which are formed can be treated electrochemically to recover the metals.

  2. Radon reduction

    SciTech Connect

    Hamilton, M.A. )

    1990-11-01

    During a radon gas screening program, elevated levels of radon gas were detected in homes on Mackinac Island, Mich. Six homes on foundations with crawl spaces were selected for a research project aimed at reducing radon gas concentrations, which ranged from 12.9 to 82.3 pCi/l. Using isolation and ventilation techniques, and variations thereof, radon concentrations were reduced to less than 1 pCi/l. This paper reports that these reductions were achieved using 3.5 mil cross laminated or 10 mil high density polyethylene plastic as a barrier without sealing to the foundation or support piers, solid and/or perforated plastic pipe and mechanical fans. Wind turbines were found to be ineffective at reducing concentrations to acceptable levels. Homeowners themselves installed all materials.

  3. Reductive dissolution of goethite by phenolic reductants

    NASA Astrophysics Data System (ADS)

    LaKind, Judy S.; Stone, Alan T.

    1989-05-01

    The reductive dissolution of goethite (α-FeOOH) and hematite (α-Fe 2O 3) by phenolic reductants has been examined in order to improve the understanding of iron transformations in soils, sediments and aquifers. Rates of goethite reductive dissolution by hydroquinone increased as the pH was increased from pH 1.8 to 4.65, arid the following reaction stoichiometry was obeyed: 2 α- FeOOH + QH2 = 2 Fe2+ + Q + 4 OH-. As the pH was increased from pH 4.5 to 6.0, the reductive dissolution rate decreased to below the detection limit. At pH 3.4, the reductive dissolution of hematite was two orders of magnitude slower than goethite. The relationship between structure and reactivity was examined for a series of mono-, di-, and tri-hydroxybenzene reductants. Rates of reductive dissolution decreased in the following order: catechol ˜- hydroquinone > 3,4-dihydroxybenzoic acid > resorcinol-phenol-4-hydroxybenzoic acid.

  4. Drag reduction in nature

    NASA Astrophysics Data System (ADS)

    Bushnell, D. M.; Moore, K. J.

    Recent studies on the drag-reducing shapes, structures, and behaviors of swimming and flying animals are reviewed, with an emphasis on potential analogs in vehicle design. Consideration is given to form drag reduction (turbulent flow, vortex generation, mass transfer, and adaptations for body-intersection regions), skin-friction drag reduction (polymers, surfactants, and bubbles as surface 'additives'), reduction of the drag due to lift, drag-reduction studies on porpoises, and drag-reducing animal behavior (e.g., leaping out of the water by porpoises). The need for further research is stressed.

  5. Drag reduction in nature

    NASA Technical Reports Server (NTRS)

    Bushnell, D. M.; Moore, K. J.

    1991-01-01

    Recent studies on the drag-reducing shapes, structures, and behaviors of swimming and flying animals are reviewed, with an emphasis on potential analogs in vehicle design. Consideration is given to form drag reduction (turbulent flow, vortex generation, mass transfer, and adaptations for body-intersection regions), skin-friction drag reduction (polymers, surfactants, and bubbles as surface 'additives'), reduction of the drag due to lift, drag-reduction studies on porpoises, and drag-reducing animal behavior (e.g., leaping out of the water by porpoises). The need for further research is stressed.

  6. Intelligent Data Reduction (IDARE)

    NASA Technical Reports Server (NTRS)

    Brady, D. Michael; Ford, Donnie R.

    1990-01-01

    A description of the Intelligent Data Reduction (IDARE) expert system and an IDARE user's manual are given. IDARE is a data reduction system with the addition of a user profile infrastructure. The system was tested on a nickel-cadmium battery testbed. Information is given on installing, loading, maintaining the IDARE system.

  7. Does Source Reduction Work?

    ERIC Educational Resources Information Center

    Allaway, David

    1992-01-01

    Suggests that quantification is essential to establish the cost-effectiveness of source reduction (SR). Presents case studies of monitoring methods for seven different kinds of SR efforts: (1) packaging changes, (2) SR businesses, (3) waste exchanges, (4) individual nonresidential efforts, (5) variable garbage rates, (6) yard waste reduction, and…

  8. Footprint reduction's 'multiple paybacks'.

    PubMed

    2010-06-01

    Some of the measures that EFM personnel can take to further reduce their estates' carbon footprint at a time when pressure to cut energy consumption must be balanced both against the requirement to create the best possible patient environment, and new medical technology that may require substantial energy to operate, were the focus of a recent IHEEM carbon reduction seminar in London. The one-day event, "Planning to achieve Carbon Reduction Commitment targets for healthcare premises", also included a look at the key steps affected healthcare organisations, and especially their estates teams, need to be taking already to ensure compliance with the new Carbon Reduction Commitment scheme. PMID:20597381

  9. Reduction of bone strength

    NASA Technical Reports Server (NTRS)

    Bingham, Cindy

    1990-01-01

    Viewgraphs on reduction of bone strength are presented. WEHI 231 B growth rates, experimental chambers used to apply the electric field to the cell cultures, and a mouse suspended by rotating cuff in electromagnetic field are shown.

  10. AMD NOX REDUCTION IMPACTS

    EPA Science Inventory

    This is the first phase of a potentially multi-phase project aimed at identifying scientific methodologies that will lead to the development of innnovative analytical tools supporting the analysis of control strategy effectiveness, namely. accountabilty. Significant reductions i...

  11. REDUCTIONS WITHOUT REGRET: SUMMARY

    SciTech Connect

    Swegle, J.; Tincher, D.

    2013-09-16

    This paper briefly summarizes the series in which we consider the possibilities for losing, or compromising, key capabilities of the U.S. nuclear force in the face of modernization and reductions. The first of the three papers takes an historical perspective, considering capabilities that were eliminated in past force reductions. The second paper is our attempt to define the needed capabilities looking forward in the context of the current framework for force modernization and the current picture of the evolving challenges of deterrence and assurance. The third paper then provides an example for each of our undesirable outcomes: the creation of roach motels, box canyons, and wrong turns.

  12. Discrete reductive perturbation technique

    SciTech Connect

    Levi, Decio; Petrera, Matteo

    2006-04-15

    We expand a partial difference equation (P{delta}E) on multiple lattices and obtain the P{delta}E which governs its far field behavior. The perturbative-reductive approach is here performed on well-known nonlinear P{delta}Es, both integrable and nonintegrable. We study the cases of the lattice modified Korteweg-de Vries (mKdV) equation, the Hietarinta equation, the lattice Volterra-Kac-Van Moerbeke equation and a nonintegrable lattice KdV equation. Such reductions allow us to obtain many new P{delta}Es of the nonlinear Schroedinger type.

  13. Stress and stress reduction.

    PubMed

    Straub, Heather; Qadir, Sameen; Miller, Greg; Borders, Ann

    2014-09-01

    Chronic stress contributes to preterm birth (PTB), through direct physiological mechanisms or behavioral pathways. This review identified interventions to prevent PTB through decreased maternal stress. Studies were grouped according to intervention: group prenatal care (11 studies), care coordination (8 studies), health insurance expansion (4 studies), expanded prenatal education/support in the clinic (8 studies), home visitation (9 studies), telephone contact (2 studies), or stress-reduction strategies (5 studies). Group prenatal care had the most evidence for PTB prevention. Comparative studies of PTB prevention through different models of prenatal care and maternal support, education, empowerment, stress-reduction, and coping strategies are needed. PMID:24979355

  14. Time, Chance, and Reduction

    NASA Astrophysics Data System (ADS)

    Ernst, Gerhard; Hüttemann, Andreas

    2010-01-01

    List of contributors; 1. Introduction Gerhard Ernst and Andreas Hütteman; Part I. The Arrows of Time: 2. Does a low-entropy constraint prevent us from influencing the past? Mathias Frisch; 3. The part hypothesis meets gravity Craig Callender; 4. Quantum gravity and the arrow of time Claus Kiefer; Part II. Probability and Chance: 5. The natural-range conception of probability Jacob Rosenthal; 6. Probability in Boltzmannian statistical mechanics Roman Frigg; 7. Humean mechanics versus a metaphysics of powers Michael Esfeld; Part III. Reduction: 8. The crystallisation of Clausius's phenomenological thermodynamics C. Ulises Moulines; 9. Reduction and renormalization Robert W. Batterman; 10. Irreversibility in stochastic dynamics Jos Uffink; Index.

  15. Exercise and Fat Reduction.

    ERIC Educational Resources Information Center

    Clarke, H. Harrison, Ed.

    1975-01-01

    This document analyzes the problems encountered by the obese individual and the effects of regular exercise on weight loss and fat reduction. Part one compares the psychological traits of obese children with age groups of normal weight and discusses the organic disorders and social attitudes which plague the overweight individual. Part two states…

  16. Hadamard speckle contrast reduction

    NASA Astrophysics Data System (ADS)

    Trisnadi, Jahja I.

    2004-01-01

    The condition for a diffuser to produce the maximum speckle contrast reduction with the minimum number of distinct phase patterns is derived. A binary realization of this optimum diffuser is obtained by mapping the rows or columns of a Hadamard matrix to the phase patterns. The method is experimentally verified in the Grating Light Valve laser projection display.

  17. Industrial Waste Reduction Program

    SciTech Connect

    Not Available

    1991-10-24

    US industry generates over 12 billion tons of wastes each year. These wastes consist of undesirable by-products of industrial production that are discarded into our environment. Energy is an integral part of these wastes; it is found in the embodied energy of industrial feedstocks not optimally used, in the energy content of the wastes themselves, and in the energy needed to transport, treat, and dispose of wastes. Estimates of the potential energy savings from reducing industrial wastes range from three to four quadrillion Btu per year -- enough to meet the annual energy needs of 30 million American homes. This document presents a plan for the Industrial Waste Reduction Program, which has been designed to help achieve national goals for energy efficiency and waste minimization. The objective of the program is to improve the energy efficiency of industrial processes through cost-effective waste reduction. The initial program focus is on waste reduction opportunities in the production and use of chemicals, due to the significant amount of energy used in these activities and the large amounts of hazardous and toxic wastes they generate. The chemical industry will be the initial subject of a series of waste reduction opportunity assessments conducted as part of the program. Assessments of other industries and waste problems will follow.

  18. Reduction in Force.

    ERIC Educational Resources Information Center

    Wood, R. Craig

    This chapter of "Principles of School Business Management" reviews several concerns that must be addressed by school business administrators in districts facing declining enrollments and the need for reductions in force. The chapter first looks at the business administrator's significant role in planning for retrenchment. The chapter then…

  19. Reduction in Force.

    ERIC Educational Resources Information Center

    Phay, Robert

    Chapter 2 in a book on school law discusses the reasons for reduction in force (RIF) and presents a set of model regulations for school districts as the best means of minimizing legal problems resulting from RIF. The reasons for RIF include declining student enrollments; reduced turnover among teachers; changes in programs; and more constrained…

  20. Adolescent Prejudice Reduction Conference.

    ERIC Educational Resources Information Center

    Ketroser, Heidi

    1988-01-01

    Discusses the fifth annual Dr. Curtis C. Melnick Adolescent Prejudice Reduction Conference sponsored by the Greater Chicago (Illinois) Regional Office of the Anti-Defamation League of the B'nai B'rith. The day-long conference addressed issues of prejudice and allowed students and staff from various high schools to explore their concerns with…

  1. Imino Transfer Hydrogenation Reductions.

    PubMed

    Wills, Martin

    2016-04-01

    This review contains a summary of recent developments in the transfer hydrogenation of C=N bonds, with a particularly focus on reports from within the last 10 years and asymmetric transformations. However, earlier work in the area is also discussed in order to provide context for the more recent results described. I focus strongly on the Ru/TsDPEN class of asymmetric transfer hydrogenation reactions originally reported by Noyori et al., together with examples of their applications, particularly to medically valuable target molecules. The recent developments in the area of highly active imine-reduction catalysts, notably those based on iridium, are also described in some detail. I discuss diastereoselective reduction methods as a route to the synthesis of chiral amines using transfer hydrogenation. The recent development of a methodology for positioning reduction complexes within chiral proteins, permitting the generation of asymmetric reduction products through a directed modification of the protein environment in a controlled manner, is also discussed. PMID:27573139

  2. Nagel on reduction.

    PubMed

    Sarkar, Sahotra

    2015-10-01

    This paper attempts a critical reappraisal of Nagel's (1961, 1970) model of reduction taking into account both traditional criticisms and recent defenses. This model treats reduction as a type of explanation in which a reduced theory is explained by a reducing theory after their relevant representational items have been suitably connected. In accordance with the deductive-nomological model, the explanation is supposed to consist of a logical deduction. Nagel was a pluralist about both the logical form of the connections between the reduced and reducing theories (which could be conditionals or biconditionals) and their epistemological status (as analytic connections, conventions, or synthetic claims). This paper defends Nagel's pluralism on both counts and, in the process, argues that the multiple realizability objection to reductionism is misplaced. It also argues that the Nagel model correctly characterizes reduction as a type of explanation. However, it notes that logical deduction must be replaced by a broader class of inferential techniques that allow for different types of approximation. Whereas Nagel (1970), in contrast to his earlier position (1961), recognized the relevance of approximation, he did not realize its full import for the model. Throughout the paper two case studies are used to illustrate the arguments: the putative reduction of classical thermodynamics to the kinetic theory of matter and that of classical genetics to molecular biology. PMID:26386529

  3. Financing Class Size Reduction

    ERIC Educational Resources Information Center

    Achilles, C. M.

    2005-01-01

    Class size reduction has been shown to, among other things, improve academic achievement for all students and particularly for low-income and minority students. With the No Child Left Behind Act's heavy emphasis on scientifically based research, adequate yearly progress, and disaggregated results, one wonders why all children aren't enrolled in…

  4. Teaching Reductive Thinking

    ERIC Educational Resources Information Center

    Armoni, Michal; Gal-Ezer, Judith

    2005-01-01

    When dealing with a complex problem, solving it by reduction to simpler problems, or problems for which the solution is already known, is a common method in mathematics and other scientific disciplines, as in computer science and, specifically, in the field of computability. However, when teaching computational models (as part of computability)…

  5. Reduction/Transformation Operators

    SciTech Connect

    Bartlett, Roscoe A.

    2006-09-01

    RTOp (reduction/transformation operators) is a collection of C++ software that provides the basic mechanism for implementinig vector operations in a flexible and efficient manner. This is the main interface utilized by Thyra to allow for the specification of specific vector reduction and/or transformation operations. The RTOp package contains three different types of software. (a) a small number of interoperability interfaces. (b) support software including code for the parallel SPMD mode based on only Teuchos::Comm(and not MPl directly(, and (c) a library of pre-implemented RTOp subclasses for everything from simple AXPYs and norms, to more specialized vector operations. RTOp allows an algorithm developer to implement their own RTOp subclasses in a way that is independent from any specific serial, parallel, out-of-core or other type of vector implementation. RTOp is a required package by Thyra and MOOCHO. (c)

  6. Bacterial reduction of chromium

    SciTech Connect

    Schmieman, E.A.; Yonge, D.R.; Johnstone, D.L.

    1997-12-31

    A mixed culture was enriched from surface soil obtained from an eastern United States site highly contaminated with chromate. Growth of the culture was inhibited by a chromium concentration of 12 mg/L. Another mixed culture was enriched from subsurface soil obtained from the Hanford reservation, at the fringe of a chromate plume. The enrichment medium was minimal salts solution augmented with acetate as the carbon source, nitrate as the terminal electron acceptor, and various levels of chromate. This mixed culture exhibited chromate tolerance, but not chromate reduction capability, when growing anaerobically on this medium. However, this culture did exhibit chromate reduction capability when growing anaerobically on TSB. Growth of this culture was not inhibited by a chromium concentration of 12 mg/L. Mixed cultures exhibited decreasing diversity with increasing levels of chromate in the enrichment medium. An in situ bioremediation strategy is suggested for chromate contaminated soil and groundwater. 16 refs., 5 figs., 1 tab.

  7. Reduction/Transformation Operators

    Energy Science and Technology Software Center (ESTSC)

    2006-09-01

    RTOp (reduction/transformation operators) is a collection of C++ software that provides the basic mechanism for implementinig vector operations in a flexible and efficient manner. This is the main interface utilized by Thyra to allow for the specification of specific vector reduction and/or transformation operations. The RTOp package contains three different types of software. (a) a small number of interoperability interfaces. (b) support software including code for the parallel SPMD mode based on only Teuchos::Comm(and notmore » MPl directly(, and (c) a library of pre-implemented RTOp subclasses for everything from simple AXPYs and norms, to more specialized vector operations. RTOp allows an algorithm developer to implement their own RTOp subclasses in a way that is independent from any specific serial, parallel, out-of-core or other type of vector implementation. RTOp is a required package by Thyra and MOOCHO. (c)« less

  8. Injury reduction at Fermilab

    SciTech Connect

    Griffing, Bill; /Fermilab

    2005-06-01

    In a recent DOE Program Review, Fermilab's director presented results of the laboratory's effort to reduce the injury rate over the last decade. The results, shown in the figure below, reveal a consistent and dramatic downward trend in OSHA recordable injuries at Fermilab. The High Energy Physics Program Office has asked Fermilab to report in detail on how the laboratory has achieved the reduction. In fact, the reduction in the injury rate reflects a change in safety culture at Fermilab, which has evolved slowly over this period, due to a series of events, both planned and unplanned. This paper attempts to describe those significant events and analyze how each of them has shaped the safety culture that, in turn, has reduced the rate of injury at Fermilab to its current value.

  9. Aluminum reduction cell electrode

    DOEpatents

    Goodnow, Warren H.; Payne, John R.

    1982-01-01

    The invention is directed to cathode modules comprised of refractory hard metal materials, such as TiB.sub.2, for an electrolytic cell for the reduction of alumina wherein the modules may be installed and replaced during operation of the cell and wherein the structure of the cathode modules is such that the refractory hard metal materials are not subjected to externally applied forces or rigid constraints.

  10. Television noise reduction device

    NASA Technical Reports Server (NTRS)

    Gordon, B. L.; Stamps, J. C. (Inventor)

    1975-01-01

    A noise reduction system that divides the color video signal into its luminance and chrominance components is reported. The luminance component of a given frame is summed with the luminance component of at least one preceding frame which was stored on a disc recorder. The summation is carried out so as to achieve a signal amplitude equivalent to that of the original signal. The averaged luminance signal is then recombined with the chrominance signal to achieve a noise-reduced television signal.

  11. [Aware and cooperative reduction].

    PubMed

    Tambone, V; Ghilardi, G

    2012-01-01

    The aim of this work is to address the question of reduction in the scientific method, to evaluate its legitimacy as well as its pro and contra from an epistemological point of view. In the first paragraph we classify some kinds of reductionism, analysing their presuppositions and epistemological status and showing some examples of scientific reduction. The presentation includes a classificatory table that shows some of the different forms of biological reductionism. In the second paragraph we study the epistemology of science starting from its modern beginning: the Vienna Circle, focusing on the meaning of methodological reductionism. What did it mean for science to define itself mainly as method, which effects did this new concept of science have on methodology and what kind of problems did this movement bring about. In the third paragraph we examine the reactions triggered by methodological reductionism, we analyze the theoretical consistency of these answers, trying to offer a balanced view. We show how complexity can be seen as a paradigm of the anti-reductionism effort, and we study its epistemological basis. In the fourth paragraph we outline our operative proposal: the reduction that is both aware and cooperative. We point out the main reasons why science cannot avoid being reductive in some way, and therefore how we need to deal with this feature in order to prevent it to degenerate into reductionism. We show some examples of this new proposal taken from the practical realm and from literature, where it is possible to discern the spirit of this alternative methodology. PMID:22964706

  12. Drag reduction strategies

    NASA Technical Reports Server (NTRS)

    Hill, D. Christopher

    1994-01-01

    previously a description was given of an active control scheme using wall transpiration that leads to a 15% reduction in surface skin friction beneath a turbulent boundary layer, according to direct numerical simulation. In this research brief further details of that scheme and its variants are given together with some suggestions as to how sensor/actuator arrays could be configured to reduce surface drag. The research which is summarized here was performed during the first half of 1994. This research is motivated by the need to understand better how the dynamics of near-wall turbulent flow can be modified so that skin friction is reduced. The reduction of turbulent skin friction is highly desirable in many engineering applications. Experiments and direct numerical simulations have led to an increased understanding of the cycle of turbulence production and transport in the boundary layer and raised awareness of the possibility of disrupting the process with a subsequent reduction in turbulent skin friction. The implementation of active feedback control in a computational setting is a viable approach for the investigation of the modifications to the flow physics that can be achieved. Bewley et al. and Hill describe how ideas from optimal control theory are employed to give 'sub-optimal' drag reduction schemes. The objectives of the work reported here is to investigate in greater detail the assumptions implicit within such schemes and their limitations. It is also our objective to describe how an array of sensors and actuators could be arranged and interconnected to form a 'smart' surface which has low skin friction.

  13. Aluminum reduction cell electrode

    DOEpatents

    Goodnow, W.H.; Payne, J.R.

    1982-09-14

    The invention is directed to cathode modules comprised of refractory hard metal materials, such as TiB[sub 2], for an electrolytic cell for the reduction of alumina wherein the modules may be installed and replaced during operation of the cell and wherein the structure of the cathode modules is such that the refractory hard metal materials are not subjected to externally applied forces or rigid constraints. 9 figs.

  14. Reduction of astrographic catalogues

    NASA Technical Reports Server (NTRS)

    Stock, J.; Prugna, F. D.; Cova, J.

    1984-01-01

    An automatic program for the reduction of overlapping Carte du Ciel plates is described. The projection and transformation equations are given and the RAA subprogram flow is outlined. The program was applied to two different sets of data, namely to nine overlapping plates of the Cape Zone of the CdC, and to fifteen plates taken with the CIDA-refractor of the open cluster Tr10.

  15. Echocardiographic speckle reduction comparison.

    PubMed

    Finn, Seán; Glavin, Martin; Jones, Edward

    2011-01-01

    In this paper, a detailed description and comparison of speckle reduction of medical ultrasound, and in particular echocardiography, is presented. Fifteen speckle reduction filters are described in a detailed fashion to facilitate implementation for research and evaluation. The filtering techniques considered include anisotropic diffusion, wavelet denoising, and local statistics. Common nomenclature and notation are adopted, to expedite comparison between approaches. Comparison of the filters is based on their application to simulated images, clinical videos, and a computational requirement analysis. The ultrasound simulation method provides a realistic model of the image acquisition process, and permits the use of a noise-free reference image for comparison. Application of objective quality metrics quantifies the preservation of image edges, overall image distortion, and improvement in image contrast. The computational analysis quantifies the number of operations required for each speckle reduction method. A speed-accuracy analysis of discretization methods for anisotropic diffusion is included. It is concluded that the optimal method is the OSRAD diffusion filter. This method is capable of strong speckle suppression, increasing the average SNRA of the simulated images by a factor of two. This method also shows favorable edge preservation and contrast improvement, and may be efficiently implemented. PMID:21244977

  16. Reduction of turbomachinery noise

    NASA Technical Reports Server (NTRS)

    Waitz, Ian A. (Inventor); Brookfield, John M. (Inventor); Sell, Julian (Inventor); Hayden, Belva J. (Inventor); Ingard, K. Uno (Inventor)

    1999-01-01

    In the invention, propagating broad band and tonal acoustic components of noise characteristic of interaction of a turbomachine blade wake, produced by a turbomachine blade as the blade rotates, with a turbomachine component downstream of the rotating blade, are reduced. This is accomplished by injection of fluid into the blade wake through a port in the rotor blade. The mass flow rate of the fluid injected into the blade wake is selected to reduce the momentum deficit of the wake to correspondingly increase the time-mean velocity of the wake and decrease the turbulent velocity fluctuations of the wake. With this fluid injection, reduction of both propagating broad band and tonal acoustic components of noise produced by interaction of the blade wake with a turbomachine component downstream of the rotating blade is achieved. In a further noise reduction technique, boundary layer fluid is suctioned into the turbomachine blade through a suction port on the side of the blade that is characterized as the relatively low-pressure blade side. As with the fluid injection technique, the mass flow rate of the fluid suctioned into the blade is here selected to reduce the momentum deficit of the wake to correspondingly increase the time-mean velocity of the wake and decrease the turbulent velocity fluctuations of the wake; reduction of both propagating broad band and tonal acoustic components of noise produced by interaction of the blade wake with a turbomachine component downstream of the rotating blade is achieved with this suction technique. Blowing and suction techniques are also provided in the invention for reducing noise associated with the wake produced by fluid flow around a stationary blade upstream of a rotating turbomachine.

  17. Dimensional reduction transition

    SciTech Connect

    Kolb, E.

    1984-11-01

    In this conference on phase transitions in the early Universe the author discusses the transition from more than four space-time dimensions to four effective space-time dimensions; the dimensional reduction transition. The basic assumption is that the true dimensionality of space-time is more than four, and that at present the extra dimensions are compact and too small to be observable. The origin of the observed gauge symmetries from symmetries of a compact space has been proposed as a possible approach for the unification of particle physics and gravity. The common assumption in all models with extra dimensions is that the unseen dimensions are compactified to a very small size, usually taken to be of the order of the Planck length. To probe the structure of the extra dimensions would require energies of the Planck mass E = m/sub pl/ = 1.2 x 10/sup 19/GeV, and the early Universe may be the only source of such energies. The author will assume for initial conditions that all spatial dimensions are small, and that initially the Universe had N = 3 + D spatial dimensions. When the temperature fell below T = R/sub D//sup -1/, where R/sub D/ is the physical size of the compact extra dimensions, the space-time dimensionality of the Universe underwent a reduction to effectively a 4 space-time dimensional Universe, and dynamical effects of the extra dimensions became unimportant. In this paper I will discuss three possible consequences of this cosmological dimensional reduction; entropy production (inflation), magnetic monopole production, and stable, massive particle production. 14 refs., 4 figs.

  18. Electrolytic oxide reduction system

    SciTech Connect

    Wiedmeyer, Stanley G; Barnes, Laurel A; Williamson, Mark A; Willit, James L; Berger, John F

    2015-04-28

    An electrolytic oxide reduction system according to a non-limiting embodiment of the present invention may include a plurality of anode assemblies, a plurality of cathode assemblies, and a lift system configured to engage the anode and cathode assemblies. The cathode assemblies may be alternately arranged with the anode assemblies such that each cathode assembly is flanked by two anode assemblies. The lift system may be configured to selectively engage the anode and cathode assemblies so as to allow the simultaneous lifting of any combination of the anode and cathode assemblies (whether adjacent or non-adjacent).

  19. REDSPEC: NIRSPEC data reduction

    NASA Astrophysics Data System (ADS)

    Kim, S.; Prato, L.; McLean, I.

    2015-07-01

    REDSPEC is an IDL based reduction package designed with NIRSPEC in mind though can be used to reduce data from other spectrographs as well. REDSPEC accomplishes spatial rectification by summing an A+B pair of a calibration star to produce an image with two spectra; the image is remapped on the basis of polynomial fits to the spectral traces and calculation of gaussian centroids to define their separation, producing straight spectral traces with respect to the detector rows. The raw images are remapped onto a coordinate system with uniform intervals in spatial extent along the slit and in wavelength along the dispersion axis.

  20. Aluminum reduction cell electrode

    DOEpatents

    Payne, John R.

    1983-09-20

    The invention is directed to an anode-cathode structure for an electrolytic cell for the reduction of alumina wherein the structure is comprised of a carbon anode assembly which straddles a wedge-shaped refractory hard metal cathode assembly having steeply sloped cathodic surfaces, each cathodic surface being paired in essentially parallel planar relationship with an anode surface. The anode-cathode structure not only takes into account the structural weakness of refractory hard metal materials but also permits the changing of the RHM assembly during operation of the cell. Further, the anode-cathode structure enhances the removal of anode gas from the interpolar gap between the anode and cathode surfaces.

  1. Alumina reduction cell

    SciTech Connect

    Tabereaux, A.T.; Gunnip, F.L.

    1987-06-16

    An alumina reduction cell is described having a cathode and an anode. The anode is formed of a carbonaceous paste and baked during operation of cell and the anode having rows of anode pins on opposing faces. The pins are positioned by passing the pins through openings in anode channels vertically stacked along the opposing faces of the anode. The lowermost row of anode pins carries current through the anode; the improvement positions the anode pins passing through along a line of constant current distribution in the anode.

  2. Aircraft engine pollution reduction

    NASA Technical Reports Server (NTRS)

    Rudey, R. A.

    1972-01-01

    The effect of engine operation on the types and levels of the major aircraft engine pollutants is described and the major factors governing the formation of these pollutants during the burning of hydrocarbon fuel are discussed. Methods which are being explored to reduce these pollutants are discussed and their application to several experimental research programs are pointed out. Results showing significant reductions in the levels of carbon monoxide, unburned hydrocarbons, and oxides of nitrogen obtained from experimental combustion research programs are presented and discussed to point out potential application to aircraft engines.

  3. Core Noise Reduction

    NASA Technical Reports Server (NTRS)

    Hultgren, Lennart S.

    2011-01-01

    This presentation is a technical summary of and outlook for NASA-internal and NASA-sponsored external research on core (combustor and turbine) noise funded by the Fundamental Aeronautics Program Subsonic Fixed Wing (SFW) Project. Sections of the presentation cover: the SFW system-level noise metrics for the 2015, 2020, and 2025 timeframes; turbofan design trends and their aeroacoustic implications; the emerging importance of core noise and its relevance to the SFW Reduce-Perceived-Noise Technical Challenge; and the current research activities in the core noise area. Recent work1 on the turbine-transmission loss of combustor noise is briefly described, two2,3 new NRA efforts in the core-noise area are outlined, and an effort to develop CMC-based acoustic liners for broadband noise reduction suitable for turbofan-core application is delineated. The NASA Fundamental Aeronautics Program has the principal objective of overcoming today's national challenges in air transportation. The reduction of aircraft noise is critical to enabling the anticipated large increase in future air traffic. The Subsonic Fixed Wing Project's Reduce-Perceived-Noise Technical Challenge aims to develop concepts and technologies to dramatically reduce the perceived aircraft noise outside of airport boundaries.

  4. UCAC3: ASTROMETRIC REDUCTIONS

    SciTech Connect

    Finch, Charlie T.; Zacharias, Norbert; Wycoff, Gary L.

    2010-06-15

    Presented here are the details of the astrometric reductions from the x, y data to mean right ascension (R.A.), declination (decl.) coordinates of the third U.S. Naval Observatory CCD Astrograph Catalog (UCAC3). For these new reductions we used over 216,000 CCD exposures. The Two-Micron All-Sky Survey (2MASS) data are used extensively to probe for coordinate and coma-like systematic errors in UCAC data mainly caused by the poor charge transfer efficiency of the 4K CCD. Errors up to about 200 mas have been corrected using complex look-up tables handling multiple dependences derived from the residuals. Similarly, field distortions and sub-pixel phase errors have also been evaluated using the residuals with respect to 2MASS. The overall magnitude equation is derived from UCAC calibration field observations alone, independent of external catalogs. Systematic errors of positions at the UCAC observing epoch as presented in UCAC3 are better corrected than in the previous catalogs for most stars. The Tycho-2 catalog is used to obtain final positions on the International Celestial Reference Frame. Residuals of the Tycho-2 reference stars show a small magnitude equation (depending on declination zone) that might be inherent in the Tycho-2 catalog.

  5. Microbial reduction of iodate

    USGS Publications Warehouse

    Councell, T.B.; Landa, E.R.; Lovley, D.R.

    1997-01-01

    The different oxidation species of iodine have markedly different sorption properties. Hence, changes in iodine redox states can greatly affect the mobility of iodine in the environment. Although a major microbial role has been suggested in the past to account for these redox changes, little has been done to elucidate the responsible microorganisms or the mechanisms involved. In the work presented here, direct microbial reduction of iodate was demonstrated with anaerobic cell suspensions of the sulfate reducing bacterium Desulfovibrio desulfuricans which reduced 96% of an initial 100 ??M iodate to iodide at pH 7 in 30 mM NaHCO3 buffer, whereas anaerobic cell suspensions of the dissimilatory Fe(III)-reducing bacterium Shewanella putrefaciens were unable to reduce iodate in 30 mM NaHCO3 buffer (pH 7). Both D. desulfuricans and S. putrefaciens were able to reduce iodate at pH 7 in 10 mM HEPES buffer. Both soluble ferrous iron and sulfide, as well as iron monosulfide (FeS) were shown to abiologically reduce iodate to iodide. These results indicate that ferric iron and/or sulfate reducing bacteria are capable of mediating both direct, enzymatic, as well as abiotic reduction of iodate in natural anaerobic environments. These microbially mediated reactions may be important factors in the fate and transport of 129I in natural systems.

  6. Reductant injection and mixing system

    DOEpatents

    Reeves, Matt; Henry, Cary A.; Ruth, Michael J.

    2016-02-16

    A gaseous reductant injection and mixing system is described herein. The system includes an injector for injecting a gaseous reductant into an exhaust gas stream, and a mixer attached to a surface of the injector. The injector includes a plurality of apertures through which the gaseous reductant is injected into an exhaust gas stream. The mixer includes a plurality of fluid deflecting elements.

  7. Aluminum reduction cell electrode

    DOEpatents

    Payne, J.R.

    1983-09-20

    The invention is directed to an anode-cathode structure for an electrolytic cell for the reduction of alumina wherein the structure is comprised of a carbon anode assembly which straddles a wedge-shaped refractory hard metal cathode assembly having steeply sloped cathodic surfaces, each cathodic surface being paired in essentially parallel planar relationship with an anode surface. The anode-cathode structure not only takes into account the structural weakness of refractory hard metal materials but also permits the changing of the RHM assembly during operation of the cell. Further, the anode-cathode structure enhances the removal of anode gas from the interpolar gap between the anode and cathode surfaces. 10 figs.

  8. Aircraft engine pollution reduction.

    NASA Technical Reports Server (NTRS)

    Rudey, R. A.

    1972-01-01

    The effect of engine operation on the types and levels of the major aircraft engine pollutants is described and the major factors governing the formation of these pollutants during the burning of hydrocarbon fuel are discussed. Methods which are being explored to reduce these pollutants are discussed and their application to several experimental research programs are pointed out. Results showing significant reductions in the levels of carbon monoxide, unburned hydrocarbons, and oxides of nitrogen obtained from experimental combustion research programs are presented and discussed to point out potential application to aircraft engines. An experimental program designed to develop and demonstrate these and other advanced, low pollution combustor design methods is described. Results that have been obtained to date indicate considerable promise for reducing advanced engine exhaust pollutants to levels significantly below current engines.

  9. Secondary superheater slagging reduction

    SciTech Connect

    Larose, J.A. ); Benson, R.C. )

    1992-01-01

    Utility boilers can be modified to reduce excessive slagging on the secondary superheater lower leading edges. Reduction of the high slagging accumulation rates will increase the pendant heat absorption and reduce the required superheater cleaning and slag removal. The cause of te slagging and appropriate boiler modifications are determined with numerical modeling. Results from two utility boiler analyses showed that regions of high gas and particle temperatures and flow rates exist near the superheater lower surfaces and are the probable cause of the rapid slagging. Design modifications which redistribute the flow and reduce the temperature entering the superheater reduce the impaction of molten ash on the pendant surface; this lowers the slag accumulation rate which allows the boiler to operate longer without cleaning and at a higher capacity. This paper shows the potential improvements in the secondary superheater inlet conditions by modifying the boiler.

  10. Reductive electrolytic dechlorination

    SciTech Connect

    Norton, J.W. Jr.; Suidan, M.T.; Venosa, A.D.; Acheson, C.M.

    1995-11-01

    A biofilm-electrode reactor (BER) was used to dechlorinate pentachlorophenol (PCP), a recalcitrant halogenated organic used in wood and leather preservation. Electrical current was shown to play a necessary role in dechlorination, although it is unknown whether this was due to the resultant generation of hydrogen or the low reducing potential surface formed on the cathode of the anode-cathode cell. The PCP concentration in the feed was 5,000 {micro} g/L, and the PCP in the effluent was about 50 {micro}g/L, at a ethanol feed of 5 mg/L, which is a 99% reduction in PCP concentration. The feed ethanol was varied from zero to 100 mg/L, with the greatest PCP removal occurring at the highest ethanol feed rate. The total dechlorination decreased significantly when the ethanol was removed from the feed, indicating that the ethanol stabilized dechlorination.

  11. Dose Reduction Techniques

    SciTech Connect

    WAGGONER, L.O.

    2000-05-16

    As radiation safety specialists, one of the things we are required to do is evaluate tools, equipment, materials and work practices and decide whether the use of these products or work practices will reduce radiation dose or risk to the environment. There is a tendency for many workers that work with radioactive material to accomplish radiological work the same way they have always done it rather than look for new technology or change their work practices. New technology is being developed all the time that can make radiological work easier and result in less radiation dose to the worker or reduce the possibility that contamination will be spread to the environment. As we discuss the various tools and techniques that reduce radiation dose, keep in mind that the radiological controls should be reasonable. We can not always get the dose to zero, so we must try to accomplish the work efficiently and cost-effectively. There are times we may have to accept there is only so much you can do. The goal is to do the smart things that protect the worker but do not hinder him while the task is being accomplished. In addition, we should not demand that large amounts of money be spent for equipment that has marginal value in order to save a few millirem. We have broken the handout into sections that should simplify the presentation. Time, distance, shielding, and source reduction are methods used to reduce dose and are covered in Part I on work execution. We then look at operational considerations, radiological design parameters, and discuss the characteristics of personnel who deal with ALARA. This handout should give you an overview of what it takes to have an effective dose reduction program.

  12. Replacement, reduction and refinement.

    PubMed

    Flecknell, Paul

    2002-01-01

    In 1959, William Russell and Rex Burch published "The Principles of Humane Experimental Technique". They proposed that if animals were to be used in experiments, every effort should be made to Replace them with non-sentient alternatives, to Reduce to a minimum the number of animals used, and to Refine experiments which used animals so that they caused the minimum pain and distress. These guiding principles, the "3 Rs" of animal research, were initially given little attention. Gradually, however, they have become established as essential considerations when animals are used in research. They have influenced new legislation aimed at controlling the use of experimental animals, and in the United Kingdom they have become formally incorporated into the Animal (Scientific) Procedures Act. The three principles, of Replacement, Reduction and Refinement, have also proven to be an area of common ground for research workers who use animals, and those who oppose their use. Scientists, who accept the need to use animals in some experiments, would also agree that it would be preferable not to use animals. If animals were to be used, as few as possible should be used and they should experience a minimum of pain or distress. Many of those who oppose animal experimentation, would also agree that until animal experimentation is stopped, Russell and Burch's 3Rs provide a means to improve animal welfare. It has also been recognised that adoption of the 3Rs can improve the quality of science. Appropriately designed experiments that minimise variation, provide standardised optimum conditions of animals care and minimise unnecessary stress or pain, often yield better more reliable data. Despite the progress made as a result of attention to these principles, several major problems have been identified. When replacing animals with alternative methods, it has often proven difficult to formally validate the alternative. This has proven a particular problem in regulatory toxicology

  13. Jet Noise Reduction

    NASA Technical Reports Server (NTRS)

    Kenny, Patrick

    2004-01-01

    The Acoustics Branch is responsible for reducing noise levels for jet and fan components on aircraft engines. To do this, data must be measured and calibrated accurately to ensure validity of test results. This noise reduction is accomplished by modifications to hardware such as jet nozzles, and by the use of other experimental hardware such as fluidic chevrons, elliptic cores, and fluidic shields. To insure validity of data calibration, a variety of software is used. This software adjusts the sound amplitude and frequency to be consistent with data taken on another day. Both the software and the hardware help make noise reduction possible. work properly. These software programs were designed to make corrections for atmosphere, shear, attenuation, electronic, and background noise. All data can be converted to a one-foot lossless condition, using the proper software corrections, making a reading independent of weather and distance. Also, data can be transformed from model scale to full scale for noise predictions of a real flight. Other programs included calculations of Over All Sound Pressure Level (OASPL), Effective Perceived Noise Level (EPNL). OASPL is the integration of sound with respect to frequency, and EPNL is weighted for a human s response to different sound frequencies and integrated with respect to time. With the proper software correction, data taken in the NATR are useful in determining ways to reduce noise. display any difference between two or more data files. Using this program and graphs of the data, the actual and predicted data can be compared. This software was tested on data collected at the Aero Acoustic Propulsion Laboratory (AAPL) using a variety of window types and overlaps. Similarly, short scripts were written to test each individual program in the software suite for verification. Each graph displays both the original points and the adjusted points connected with lines. During this summer, data points were taken during a live experiment

  14. Size reduction machine

    SciTech Connect

    Fricke, V.

    1999-12-15

    The Size Reduction Machine (SRM) is a mobile platform capable of shearing various shapes and types of metal components at a variety of elevations. This shearing activity can be performed without direct physical movement and placement of the shear head by the operator. The base unit is manually moved and roughly aligned to each cut location. The base contains the electronics: hydraulic pumps, servos, and actuators needed to move the shear-positioning arm. The movable arm allows the shear head to have six axes of movement and to cut to within 4 inches of a wall surface. The unit has a slick electrostatic capture coating to assist in external decontamination. Internal contamination of the unit is controlled by a high-efficiency particulate air (HEPA) filter on the cooling inlet fan. The unit is compact enough to access areas through a 36-inch standard door opening. This paper is an Innovative Technology Summary Report designed to provide potential users with the information they need to quickly determine if a technology would apply to a particular environmental management problem. They also are designed for readers who may recommend that a technology be considered by prospective users.

  15. Lung Volume Reduction Surgery

    PubMed Central

    DeCamp, Malcolm M.; McKenna, Robert J.; Deschamps, Claude C.; Krasna, Mark J.

    2008-01-01

    The objective of lung volume reduction surgery (LVRS) is the safe, effective, and durable palliation of dyspnea in appropriately selected patients with moderate to severe emphysema. Appropriate patient selection and preoperative preparation are prerequisites for successful LVRS. An effective LVRS program requires participation by and communication between experts from pulmonary medicine, thoracic surgery, thoracic anesthesiology, critical care medicine, rehabilitation medicine, respiratory therapy, chest radiology, and nursing. The critical analysis of perioperative outcomes has influenced details of the conduct of the procedure and has established a bilateral, stapled approach as the standard of care for LVRS. The National Emphysema Treatment Trial (NETT) remains the world's largest multi-center, randomized trial comparing LVRS to maximal medical therapy. NETT purposely enrolled a broad spectrum of anatomic patterns of emphysema. This, along with the prospective, audited collection of extensive demographic, physiologic, radiographic, surgical and quality-of-life data, has positioned NETT as the most robust repository of evidence to guide the refinement of patient selection criteria for LVRS, to assist surgeons in providing optimal intraoperative and postoperative care, and to establish benchmarks for survival, complication rates, return to independent living, and durability of response. This article reviews the evolution of current LVRS practice with a particular emphasis on technical aspects of the operation, including the predictors and consequences of its most common complications. PMID:18453353

  16. Model reduction for flexible structures

    NASA Technical Reports Server (NTRS)

    Gawronski, Wodek; Juang, Jer-Nan

    1990-01-01

    Several conditions for a near-optimal reduction of general dynamic systems are presented focusing on the reduction in balanced and modal coordinates. It is shown that model and balanced reductions give very different results for the flexible structure with closely-spaced natural frequencies. In general, balanced reduction is found to give better results. A robust model reduction technique was developed to study the sensitivity of modeling error to variations in the damping of a structure. New concepts of grammians defined over a finite time and/or a frequency interval are proposed including computational procedures for evaluating them. Application of the model reduction technique to these grammians is considered to lead to a near-optimal reduced model which closely reproduces the full system output in the time and/or frequency interval.

  17. Emerging Community Noise Reduction Approaches

    NASA Technical Reports Server (NTRS)

    Envia, Edmane

    2012-01-01

    An overview of the current NASA research portfolio in the area of aircraft noise reduction is presented. The emphasis of the research described herein is on meeting the aggressive near- and mid-term national goals for reducing aircraft noise emissions, which NASA internal studies have shown to be feasible using noise reduction technologies currently being developed in-house or in partnership with NASA s industry and academic partners. While NASA has an active research effort in airframe noise reduction, this overview focuses on propulsion noise reduction only.

  18. Fraction reduction in membrane systems.

    PubMed

    Guo, Ping; Zhang, Hong; Chen, Haizhu; Liu, Ran

    2014-01-01

    Fraction reduction is a basic computation for rational numbers. P system is a new computing model, while the current methods for fraction reductions are not available in these systems. In this paper, we propose a method of fraction reduction and discuss how to carry it out in cell-like P systems with the membrane structure and the rules with priority designed. During the application of fraction reduction rules, synchronization is guaranteed by arranging some special objects in these rules. Our work contributes to performing the rational computation in P systems since the rational operands can be given in the form of fraction. PMID:24772037

  19. Selective reduction in multiple gestation.

    PubMed

    Osborn, M R

    1989-07-01

    As new advances in the treatment and management of infertility become available, it is hoped that selective reduction procedures will no longer be necessary. In the interim, however, it is imperative that nurses be knowledgeable about the options available to parents experiencing multifetal pregnancy, including the choice of selective reduction procedures. PMID:2732940

  20. Reduction-Fired Seedpod Bowls.

    ERIC Educational Resources Information Center

    Beyke, Rod

    2001-01-01

    Focuses on a reduction-firing process with an aim of producing high-quality blackware similar to the black-on-black pottery of Maria Martinez and other American Indian potters. Includes a lesson on creating reduction-fired seedpod bowls, lists of instructional resources and materials, and the objectives and evaluation. (CMK)

  1. Noise Reduction by Signal Accumulation

    ERIC Educational Resources Information Center

    Kraftmakher, Yaakov

    2006-01-01

    The aim of this paper is to show how the noise reduction by signal accumulation can be accomplished with a data acquisition system. This topic can be used for student projects. In many cases, the noise reduction is an unavoidable part of experimentation. Several techniques are known for this purpose, and among them the signal accumulation is the…

  2. Reduction of chemical reaction models

    NASA Technical Reports Server (NTRS)

    Frenklach, Michael

    1991-01-01

    An attempt is made to reconcile the different terminologies pertaining to reduction of chemical reaction models. The approaches considered include global modeling, response modeling, detailed reduction, chemical lumping, and statistical lumping. The advantages and drawbacks of each of these methods are pointed out.

  3. The Ethics of Interproximal Reduction.

    PubMed

    Noar, Joseph H; Kneafsey, Louise C

    2015-12-01

    Interproximal reduction (IPR) has become particularly popular with the use of removable aligners. Clinical and ethical factors concerning the use of interproximal reduction to facilitate orthodontic alignment are discussed. CPD/Clinical Relevance: An understanding of the aetiological factors of a malocclusion is essential to enable full discussion of the risks and benefits, or the alternatives to IPR. PMID:26855997

  4. DRAG REDUCTION WITH SUPERHYDROPHOBIC RIBLETS

    SciTech Connect

    Barbier, Charlotte N; D'Urso, Brian R; Jenner, Elliot

    2012-01-01

    Samples combining riblets and superhydrophobic surfaces are fabricated at University of Pittsburgh and their drag reduction properties are studied at the Center for Nanophase Materials Sciences (CNMS) in Oak Ridge National Laboratory with a commercial cone-and-plate rheometer. In parallel to the experiments, numerical simulations are performed in order to estimate the slip length at high rotational speed. For each sample, a drag reduction of at least 5% is observed in both laminar and turbulent regime. At low rotational speed, drag reduction up to 30% is observed with a 1 mm deep grooved sample. As the rotational speed increases, a secondary flow develops causing a slight decrease in drag reductions. However, drag reduction above 15% is still observed for the large grooved samples. In the turbulent regime, the 100 microns grooved sample becomes more efficient than the other samples in drag reduction and manages to sustain a drag reduction above 15%. Using the simulations, the slip length of the 100 micron grooved sample is estimated to be slightly above 100 micron in the turbulent regime.

  5. Technologies for Aircraft Noise Reduction

    NASA Technical Reports Server (NTRS)

    Huff, Dennis L.

    2006-01-01

    Technologies for aircraft noise reduction have been developed by NASA over the past 15 years through the Advanced Subsonic Technology (AST) Noise Reduction Program and the Quiet Aircraft Technology (QAT) project. This presentation summarizes highlights from these programs and anticipated noise reduction benefits for communities surrounding airports. Historical progress in noise reduction and technologies available for future aircraft/engine development are identified. Technologies address aircraft/engine components including fans, exhaust nozzles, landing gear, and flap systems. New "chevron" nozzles have been developed and implemented on several aircraft in production today that provide significant jet noise reduction. New engines using Ultra-High Bypass (UHB) ratios are projected to provide about 10 EPNdB (Effective Perceived Noise Level in decibels) engine noise reduction relative to the average fleet that was flying in 1997. Audio files are embedded in the presentation that estimate the sound levels for a 35,000 pound thrust engine for takeoff and approach power conditions. The predictions are based on actual model scale data that was obtained by NASA. Finally, conceptual pictures are shown that look toward future aircraft/propulsion systems that might be used to obtain further noise reduction.

  6. Fan Noise Reduction: An Overview

    NASA Technical Reports Server (NTRS)

    Envia, Edmane

    2001-01-01

    Fan noise reduction technologies developed as part of the engine noise reduction element of the Advanced Subsonic Technology Program are reviewed. Developments in low-noise fan stage design, swept and leaned outlet guide vanes, active noise control, fan flow management, and scarfed inlet are discussed. In each case, a description of the method is presented and, where available, representative results and general conclusions are discussed. The review concludes with a summary of the accomplishments of the AST-sponsored fan noise reduction research and a few thoughts on future work.

  7. Geometric Quantization and Foliation Reduction

    NASA Astrophysics Data System (ADS)

    Skerritt, Paul

    A standard question in the study of geometric quantization is whether symplectic reduction interacts nicely with the quantized theory, and in particular whether "quantization commutes with reduction." Guillemin and Sternberg first proposed this question, and answered it in the affirmative for the case of a free action of a compact Lie group on a compact Kahler manifold. Subsequent work has focused mainly on extending their proof to non-free actions and non-Kahler manifolds. For realistic physical examples, however, it is desirable to have a proof which also applies to non-compact symplectic manifolds. In this thesis we give a proof of the quantization-reduction problem for general symplectic manifolds. This is accomplished by working in a particular wavefunction representation, associated with a polarization that is in some sense compatible with reduction. While the polarized sections described by Guillemin and Sternberg are nonzero on a dense subset of the Kahler manifold, the ones considered here are distributional, having support only on regions of the phase space associated with certain quantized, or "admissible", values of momentum. We first propose a reduction procedure for the prequantum geometric structures that "covers" symplectic reduction, and demonstrate how both symplectic and prequantum reduction can be viewed as examples of foliation reduction. Consistency of prequantum reduction imposes the above-mentioned admissibility conditions on the quantized momenta, which can be seen as analogues of the Bohr-Wilson-Sommerfeld conditions for completely integrable systems. We then describe our reduction-compatible polarization, and demonstrate a one-to-one correspondence between polarized sections on the unreduced and reduced spaces. Finally, we describe a factorization of the reduced prequantum bundle, suggested by the structure of the underlying reduced symplectic manifold. This in turn induces a factorization of the space of polarized sections that agrees

  8. Subsolidus reduction of lunar spinels.

    NASA Technical Reports Server (NTRS)

    Haggerty, S. E.

    1971-01-01

    Discussion of evidence that some lunar basalts must have exceeded the lower limit of crystallization oxygen fugacity (fO2) by several orders of magnitude. The evidence is based primarily on the decomposition of Cr-Al-ulvospinel, and is further supported in one case by the decomposition of olivine. The data suggest that some rocks have undergone intense nonequilibrium subsolidus reduction. The reduction phenomenon is widespread, and is considered to have developed either during initial deuteric cooling or as a result of a postcrystallization reduction event.

  9. Reductive Degradation: Versatile, Low Cost.

    ERIC Educational Resources Information Center

    Water and Sewage Works, 1979

    1979-01-01

    This article discusses the use of reductive degradation as an economical and effective treatment of chlorinated hydrocarbons. Comparisons with activated carbon treatment show lower capital equipment and treatment costs. (CS)

  10. 2dfdr: Data reduction software

    NASA Astrophysics Data System (ADS)

    AAO software Team

    2015-05-01

    2dfdr is an automatic data reduction pipeline dedicated to reducing multi-fibre spectroscopy data, with current implementations for AAOmega (fed by the 2dF, KOALA-IFU, SAMI Multi-IFU or older SPIRAL front-ends), HERMES, 2dF (spectrograph), 6dF, and FMOS. A graphical user interface is provided to control data reduction and allow inspection of the reduced spectra.

  11. Chromium reduction in Pseudomonas putida

    SciTech Connect

    Ishibashi, Y.; Cervantes, C.; Silver, S. )

    1990-07-01

    Reduction of hexavalent chromium (chromate) to less-toxic trivalent chromium was studied by using cell suspensions and cell-free supernatant fluids from Pseudomonas putida PRS2000. Chromate reductase activity was associated with soluble protein and not with the membrane fraction. The crude enzyme activity was heat labile and showed a K{sub m} of 40 {mu}M CrO{sub 4}{sup 2{minus}}. Neither sulfate nor nitrate affected chromate reduction either in vitro or with intact cells.

  12. Rapid reduction of titanium dioxide nano-particles by reduction with a calcium reductant

    NASA Astrophysics Data System (ADS)

    Kikuchi, Tatsuya; Yoshida, Masumi; Matsuura, Shiki; Natsui, Shungo; Tsuji, Etsuji; Habazaki, Hiroki; Suzuki, Ryosuke O.

    2014-09-01

    Micro-, submicron-, and nano-scale titanium dioxide particles were reduced by reduction with a metallic calcium reductant in calcium chloride molten salt at 1173 K, and the reduction mechanism of the oxides by the calcium reductant was explored. These oxide particles, metallic calcium as a reducing agent, and calcium chloride as a molten salt were placed in a titanium crucible and heated under an argon atmosphere. Titanium dioxide was reduced to metallic titanium through a calcium titanate and lower titanium oxide, and the materials were sintered together to form a micro-porous titanium structure in molten salt at high temperature. The reduction rate of titanium dioxide was observed to increase with decreasing particle size; accordingly, the residual oxygen content in the reduced titanium decreases. The obtained micro-porous titanium appeared dark gray in color because of its low surface reflection. Micro-porous metallic titanium with a low oxygen content (0.42 wt%) and a large surface area (1.794 m2 g-1) can be successfully obtained by reduction under optimal conditions.

  13. Crystallographic Control in Ilmenite Reduction

    NASA Astrophysics Data System (ADS)

    de Vries, M. L.; Grey, I. E.; Fitz Gerald, J. D.

    2007-04-01

    Scanning electron microscopy and transmission electron microscopy techniques were used to characterize the products from hydrogen reduction of polygranular synthetic ilmenite discs at temperatures in the range 823 to 1173 K and pressures in the range 1 to 13 atm. Reduction commences at grain boundaries and cracks and advances progressively to grain interiors. Within individual grains, the morphology of the reduction products was found to be crystallographically controlled. Near parallel bands of metallic iron (Fe m ) form within each grain, aligned with the basal plane of ilmenite (il) (0001) il . The separation between bands is of the order of 1 μm and is relatively constant with change of pressure and temperature. In the interband region, conversion of ilmenite to rutile occurs preferentially parallel to \\{ 11ifmmodeexpandafterbarelseexpandafter\\=fi{2}0\\} _{{il}} ilmenite planes, generating platelets of rutile that grow normal to the Fe m bands. The intergrain duplex morphology of the reduction products closely resembles cellular precipitation in alloys. At reduction temperatures above ˜1000 K, the interband region comprises dense, nonporous oriented intergrowths of rutile platelets and residual ilmenite, whereas below ˜900 K, the interband region contains a fine, filamentary network of pores. In the intermediate temperature regime, a change from dense to porous interband region occurs with increasing pressure. The observations have been interpreted in terms of the relative rates of interfacial chemical reaction and solid-state diffusion, with the latter having a controlling influence at lower temperatures or higher pressures.

  14. Midwestern Greenhouse Gas Reduction Accord

    SciTech Connect

    2007-07-01

    The Midwestern Greenhouse Gas Reduction Acccord, or Midwestern Greenhouse gas Accord (MGA), is a regional agreement by governors of the states in the US Midwest and one Canadian province to reduce greenhouse gas emissions to combat climate change. Signatories to the accord include the US states of Minnesota, Wisconsin, Illinois, Indiana, Iowa, Michigan, Kansas, Ohio and South Dakota, and the Canadian Province of Manitoba. The accord, signed on November 15, 2007, established the Midwestern Greenhouse Gas Reduction Program, which aims to: establish greenhouse gas reduction targets and timeframes consistent with MGA member states' targets; develop a market-based and multi-sector cap-and-trade mechanism to help achieve those reduction targets; establish a system to enable tracking, management, and crediting for entities that reduce greenhouse gas emissions; and develop and implement additional steps as needed to achieve the reduction targets, such as a low-carbon fuel standards and regional incentives and funding mechanisms. The GHG registry will be managed by the Climate Registry, which manages the registry for other US state schemes. One of the first actions was to convene an Energy Security under Climate Stewardship Platform to guide future development of the Midwest's energy economy.

  15. Toxicity reduction in industrial effluents

    SciTech Connect

    Lankford, P.W.; Eckenfelder, W.W.

    1990-01-01

    The toxicity of manufacturing wastewaters to fish and other aquatic organisms is now being used by state and federal regulators to monitor and restrict industrial wastewater discharges. As a result, there is a great need for guidance on the subject of aquatic toxicity reduction in the field of industrial water pollution control. This book is a comprehensive reference source on the testing protocols, comparative data, and treatment techniques for effective toxicity reduction. Included in this book are detailed chapters covering various methods for toxicity reduction, such as the removal of metals, aerobic biological treatment, stripping of volatile organics, and management of sludges from toxic wastewater treatment. The book features: a complete overview of the subject, including background material for newcomers to the field; a basic summary and comparison of alternate treatment procedures; the latest methods for the identification of toxic components that readers can use for testing in their own laboratories; a description of applicable technologies for toxicity reduction; actual data from the use of processes that allow readers to compare technologies; solids management requirements including handling and disposal; useful economic comparisons of technologies; and illustrative case studies that demonstrate the application of the latest toxicity reduction technology and data to specific situations. Eleven chapters are processed separately in the appropriate data bases.

  16. Current trends in breast reduction.

    PubMed

    Roje, Zdravko; Roje, Zeljka; Milosević, Milan; Varvodić, Josip; Mance, Marko

    2012-06-01

    Results of our study describe the long term effects of reduction mammaplasty. Many women with excessively small or large breasts have an altered personal self-image and often suffer from low self-esteem and other psychological stresses. This procedure is designed to reduce and reshape large breasts, and since the size, shape, and symmetry of a woman's breasts can have a profound effect on her mental and physical well-being it is important to observe the patient's long-term outcome. Currently, breast reduction surgery is safe, effective and beneficial to the patient. In Croatia, reduction mammoplasty is often excluded from the general health care plan. The distinction between "reconstructive" versus "cosmetic" breast surgery is very well defined by the American Society of Plastic Surgeons Board of Directors. Unfortunately, the Croatian Health Society has yet to standardize such a distinction. There is an imperative need for evidence-based selection criteria. We retrospectively analyzed data of 59 female patients suffering from symptomatic macromastia who underwent reduction mammaplasty over a 16 year period (1995 until 2011). Our aim was to compare and contrast the various techniques available for reduction mammaplasty and to determine, based on patient outcome and satisfaction, which technique is most suited for each patient. The results of our study generally reinforce the observation that reduction mammaplasty significantly provides improvements in health status, long-term quality of life, postsurgical breast appearance and significantly decrease physical symptoms of pain. A number of 59 consecutive cases were initially treated with the four different breast reduction techniques: inverted-T scat or Wisa pattern breast reduction, vertical reduction mammaplasty, simplified vertical reduction mammaplasty, inferior pedicle and free nipple graft techniques. The average clinical follow-up period was 6-months, and included 48 patients. The statistical analysis of the

  17. Microbial reduction of iron ore

    DOEpatents

    Hoffmann, M.R.; Arnold, R.G.; Stephanopoulos, G.

    1989-11-14

    A process is provided for reducing iron ore by treatment with microorganisms which comprises forming an aqueous mixture of iron ore, microorganisms operable for reducing the ferric iron of the iron ore to ferrous iron, and a substrate operable as an energy source for the microbial reduction; and maintaining the aqueous mixture for a period of time and under conditions operable to effect the reduction of the ore. Preferably the microorganism is Pseudomonas sp. 200 and the reduction conducted anaerobically with a domestic wastewater as the substrate. An aqueous solution containing soluble ferrous iron can be separated from the reacted mixture, treated with a base to precipitate ferrous hydroxide which can then be recovered as a concentrated slurry. 11 figs.

  18. Microbial reduction of iron ore

    DOEpatents

    Hoffmann, Michael R.; Arnold, Robert G.; Stephanopoulos, Gregory

    1989-01-01

    A process is provided for reducing iron ore by treatment with microorganisms which comprises forming an aqueous mixture of iron ore, microorganisms operable for reducing the ferric iron of the iron ore to ferrous iron, and a substrate operable as an energy source for the microbial reduction; and maintaining the aqueous mixture for a period of time and under conditions operable to effect the reduction of the ore. Preferably the microorganism is Pseudomonas sp. 200 and the reduction conducted anaerobically with a domestic wastewater as the substrate. An aqueous solution containing soluble ferrous iron can be separated from the reacted mixture, treated with a base to precipitate ferrous hydroxide which can then be recovered as a concentrated slurry.

  19. Closed reduction of a fractured bone

    MedlinePlus

    Fracture reduction - closed ... Closed reduction is a procedure to set (reduce) a broken bone without surgery. This allows the bone ... soon as possible after the bone breaks. A closed reduction can be done by an orthopedic surgeon ( ...

  20. Uranium isotopes fingerprint biotic reduction

    SciTech Connect

    Stylo, Malgorzata; Neubert, Nadja; Wang, Yuheng; Monga, Nikhil; Romaniello, Stephen J.; Weyer, Stefan; Bernier-Latmani, Rizlan

    2015-04-20

    Knowledge of paleo-redox conditions in the Earth’s history provides a window into events that shaped the evolution of life on our planet. The role of microbial activity in paleo-redox processes remains unexplored due to the inability to discriminate biotic from abiotic redox transformations in the rock record. The ability to deconvolute these two processes would provide a means to identify environmental niches in which microbial activity was prevalent at a specific time in paleo-history and to correlate specific biogeochemical events with the corresponding microbial metabolism. Here, we demonstrate that the isotopic signature associated with microbial reduction of hexavalent uranium (U), i.e., the accumulation of the heavy isotope in the U(IV) phase, is readily distinguishable from that generated by abiotic uranium reduction in laboratory experiments. Thus, isotope signatures preserved in the geologic record through the reductive precipitation of uranium may provide the sought-after tool to probe for biotic processes. Because uranium is a common element in the Earth’s crust and a wide variety of metabolic groups of microorganisms catalyze the biological reduction of U(VI), this tool is applicable to a multiplicity of geological epochs and terrestrial environments. The findings of this study indicate that biological activity contributed to the formation of many authigenic U deposits, including sandstone U deposits of various ages, as well as modern, Cretaceous, and Archean black shales. In addition, engineered bioremediation activities also exhibit a biotic signature, suggesting that, although multiple pathways may be involved in the reduction, direct enzymatic reduction contributes substantially to the immobilization of uranium.

  1. Uranium isotopes fingerprint biotic reduction

    DOE PAGESBeta

    Stylo, Malgorzata; Neubert, Nadja; Wang, Yuheng; Monga, Nikhil; Romaniello, Stephen J.; Weyer, Stefan; Bernier-Latmani, Rizlan

    2015-04-20

    Knowledge of paleo-redox conditions in the Earth’s history provides a window into events that shaped the evolution of life on our planet. The role of microbial activity in paleo-redox processes remains unexplored due to the inability to discriminate biotic from abiotic redox transformations in the rock record. The ability to deconvolute these two processes would provide a means to identify environmental niches in which microbial activity was prevalent at a specific time in paleo-history and to correlate specific biogeochemical events with the corresponding microbial metabolism. Here, we demonstrate that the isotopic signature associated with microbial reduction of hexavalent uranium (U),more » i.e., the accumulation of the heavy isotope in the U(IV) phase, is readily distinguishable from that generated by abiotic uranium reduction in laboratory experiments. Thus, isotope signatures preserved in the geologic record through the reductive precipitation of uranium may provide the sought-after tool to probe for biotic processes. Because uranium is a common element in the Earth’s crust and a wide variety of metabolic groups of microorganisms catalyze the biological reduction of U(VI), this tool is applicable to a multiplicity of geological epochs and terrestrial environments. The findings of this study indicate that biological activity contributed to the formation of many authigenic U deposits, including sandstone U deposits of various ages, as well as modern, Cretaceous, and Archean black shales. In addition, engineered bioremediation activities also exhibit a biotic signature, suggesting that, although multiple pathways may be involved in the reduction, direct enzymatic reduction contributes substantially to the immobilization of uranium.« less

  2. Uranium isotopes fingerprint biotic reduction.

    PubMed

    Stylo, Malgorzata; Neubert, Nadja; Wang, Yuheng; Monga, Nikhil; Romaniello, Stephen J; Weyer, Stefan; Bernier-Latmani, Rizlan

    2015-05-01

    Knowledge of paleo-redox conditions in the Earth's history provides a window into events that shaped the evolution of life on our planet. The role of microbial activity in paleo-redox processes remains unexplored due to the inability to discriminate biotic from abiotic redox transformations in the rock record. The ability to deconvolute these two processes would provide a means to identify environmental niches in which microbial activity was prevalent at a specific time in paleo-history and to correlate specific biogeochemical events with the corresponding microbial metabolism. Here, we demonstrate that the isotopic signature associated with microbial reduction of hexavalent uranium (U), i.e., the accumulation of the heavy isotope in the U(IV) phase, is readily distinguishable from that generated by abiotic uranium reduction in laboratory experiments. Thus, isotope signatures preserved in the geologic record through the reductive precipitation of uranium may provide the sought-after tool to probe for biotic processes. Because uranium is a common element in the Earth's crust and a wide variety of metabolic groups of microorganisms catalyze the biological reduction of U(VI), this tool is applicable to a multiplicity of geological epochs and terrestrial environments. The findings of this study indicate that biological activity contributed to the formation of many authigenic U deposits, including sandstone U deposits of various ages, as well as modern, Cretaceous, and Archean black shales. Additionally, engineered bioremediation activities also exhibit a biotic signature, suggesting that, although multiple pathways may be involved in the reduction, direct enzymatic reduction contributes substantially to the immobilization of uranium. PMID:25902522

  3. Uranium isotopes fingerprint biotic reduction

    PubMed Central

    Stylo, Malgorzata; Neubert, Nadja; Wang, Yuheng; Monga, Nikhil; Romaniello, Stephen J.; Weyer, Stefan; Bernier-Latmani, Rizlan

    2015-01-01

    Knowledge of paleo-redox conditions in the Earth’s history provides a window into events that shaped the evolution of life on our planet. The role of microbial activity in paleo-redox processes remains unexplored due to the inability to discriminate biotic from abiotic redox transformations in the rock record. The ability to deconvolute these two processes would provide a means to identify environmental niches in which microbial activity was prevalent at a specific time in paleo-history and to correlate specific biogeochemical events with the corresponding microbial metabolism. Here, we demonstrate that the isotopic signature associated with microbial reduction of hexavalent uranium (U), i.e., the accumulation of the heavy isotope in the U(IV) phase, is readily distinguishable from that generated by abiotic uranium reduction in laboratory experiments. Thus, isotope signatures preserved in the geologic record through the reductive precipitation of uranium may provide the sought-after tool to probe for biotic processes. Because uranium is a common element in the Earth’s crust and a wide variety of metabolic groups of microorganisms catalyze the biological reduction of U(VI), this tool is applicable to a multiplicity of geological epochs and terrestrial environments. The findings of this study indicate that biological activity contributed to the formation of many authigenic U deposits, including sandstone U deposits of various ages, as well as modern, Cretaceous, and Archean black shales. Additionally, engineered bioremediation activities also exhibit a biotic signature, suggesting that, although multiple pathways may be involved in the reduction, direct enzymatic reduction contributes substantially to the immobilization of uranium. PMID:25902522

  4. Technologies for Turbofan Noise Reduction

    NASA Technical Reports Server (NTRS)

    Huff, Dennis

    2005-01-01

    An overview presentation of NASA's engine noise research since 1992 is given for subsonic commercial aircraft applications. Highlights are included from the Advanced Subsonic Technology (AST) Noise Reduction Program and the Quiet Aircraft Technology (QAT) project with emphasis on engine source noise reduction. Noise reduction goals for 10 EPNdB by 207 and 20 EPNdB by 2022 are reviewed. Fan and jet noise technologies are highlighted from the AST program including higher bypass ratio propulsion, scarf inlets, forward-swept fans, swept/leaned stators, chevron nozzles, noise prediction methods, and active noise control for fans. Source diagnostic tests for fans and jets that have been completed over the past few years are presented showing how new flow measurement methods such as Particle Image Velocimetry (PIV) have played a key role in understanding turbulence, the noise generation process, and how to improve noise prediction methods. Tests focused on source decomposition have helped identify which engine components need further noise reduction. The role of Computational AeroAcoustics (CAA) for fan noise prediction is presented. Advanced noise reduction methods such as Hershel-Quincke tubes and trailing edge blowing for fan noise that are currently being pursued n the QAT program are also presented. Highlights are shown form engine validation and flight demonstrations that were done in the late 1990's with Pratt & Whitney on their PW4098 engine and Honeywell on their TFE-731-60 engine. Finally, future propulsion configurations currently being studied that show promise towards meeting NASA's long term goal of 20 dB noise reduction are shown including a Dual Fan Engine concept on a Blended Wing Body aircraft.

  5. 2008 world direct reduction statistics

    SciTech Connect

    2009-07-01

    This supplement discusses total direct reduced iron (DRI) production for 2007 and 2008 by process. Total 2008 production by MIDREX(reg sign) direct reduction process plants was over 39.8 million tons. The total of all coal-based processes was 17.6 million tons. Statistics for world DRI production are also given by region for 2007 and 2008 and by year (1970-2009). Capacity utilization for 2008 by process is given. World DRI production by region and by process is given for 1998-2008 and world DRI shipments are given from the 1970s to 2008. A list of world direct reduction plants is included.

  6. Dimensional Reduction and Hadronic Processes

    SciTech Connect

    Signer, Adrian; Stoeckinger, Dominik

    2008-11-23

    We consider the application of regularization by dimensional reduction to NLO corrections of hadronic processes. The general collinear singularity structure is discussed, the origin of the regularization-scheme dependence is identified and transition rules to other regularization schemes are derived.

  7. PESTICIDE REDUCTION THROUGH PRECISION TARGETING

    EPA Science Inventory

    The rationale for studying insecticide resistance in this SERDP Effort stems directly from the requirement to know the effectiveness of a particular mitigation measure before it can be recommended in a comparative risk reduction environment. The following report deals with insec...

  8. Graded geometry and Poisson reduction

    SciTech Connect

    Cattaneo, A. S.; Zambon, M.

    2009-02-02

    The main result extends the Marsden-Ratiu reduction theorem in Poisson geometry, and is proven by means of graded geometry. In this note we provide the background material about graded geometry necessary for the proof. Further, we provide an alternative algebraic proof for the main result.

  9. Dorsal Hump Reduction and Osteotomies.

    PubMed

    Azizzadeh, Babak; Reilly, Michael

    2016-01-01

    This article discusses the technique for planning, executing, and troubleshooting dorsal hump reduction for the cosmetic rhinoplasty patient. Details of the discussion include the necessary elements of the preoperative consultation with the patient, the specific instruments used to effectively and reproducibly create osteotomies, the anatomic and patient variables that require special attention, and the necessary measures to guard against potential complications. PMID:26616694

  10. Functionalization of Organotrifluoroborates: Reductive Amination

    PubMed Central

    Cooper, David J.

    2010-01-01

    Herein we report the conversion of aldehyde-containing potassium and tetrabutylammonium organotrifluoroborates to the corresponding amines through reductive amination protocols. Potassium formate facilitated by catalytic palladium acetate, sodium triacetoxyborohydride, and pyridine borane have all served as effective hydride donors, reducing the initially formed imines or iminium ions to provide the corresponding amines. PMID:18412389

  11. Palladium Catalyzed Reduction of Nitrobenzene.

    ERIC Educational Resources Information Center

    Mangravite, John A.

    1983-01-01

    Compares two palladium (Pd/C) reducing systems to iron/tin-hydrochloric acid (Fe/HCl and Sn/HCl) reductions and suggests an efficient, clean, and inexpensive procedures for the conversion of nitrobenzene to aniline. Includes laboratory procedures used and discussion of typical results obtained. (JN)

  12. Women, harm reduction and HIV.

    PubMed

    Pinkham, Sophie; Malinowska-Sempruch, Kasia

    2008-05-01

    Gender shapes the experience of drug use and its associated risks. In most parts of the world, however, harm reduction and drug treatment programmes that tailor their services to meet women's needs are rare or nonexistent. Many existing services inadvertently exclude women, and discriminatory policies and social stigma drive women drug users from care and expose them to human rights abuses. Women drug users often provide sex in exchange for housing, sustenance and protection, suffer violence from sexual partners and practise unsafe sex. This paper, drawing upon evidence from existing studies, examines ways in which gender-related factors can increase women drug users' vulnerability and decrease their access to harm reduction, drug treatment and sexual and reproductive health services. It recommends designing services with low-threshold access for women drug users that help them to become more independent, involving the women in designing services and policies, making programmes available for mothers, incorporating sexual and reproductive health into harm reduction services, providing gender-sensitive drug treatment and integrated harm reduction programmes for drug-using sex workers, connecting with domestic violence and rape prevention services and educating mainstream providers. Overall, investigating the circumstances women drug users face will help to formulate policies and programmes that better serve women who use drugs. PMID:18513618

  13. Background reduction in cryogenic detectors

    SciTech Connect

    Bauer, Daniel A.; /Fermilab

    2005-04-01

    This paper discusses the background reduction and rejection strategy of the Cryogenic Dark Matter Search (CDMS) experiment. Recent measurements of background levels from CDMS II at Soudan are presented, along with estimates for future improvements in sensitivity expected for a proposed SuperCDMS experiment at SNOLAB.

  14. Workforce Reductions. An Annotated Bibliography.

    ERIC Educational Resources Information Center

    Hickok, Thomas A.; Hickok, Thomas A.

    This report, which is based on a review of practitioner-oriented sources and scholarly journals, uses a three-part framework to organize annotated bibliographies that, together, list a total of 104 sources that provide the following three perspectives on work force reduction issues: organizational, organizational-individual relationship, and…

  15. Preferences for Rape Reduction Strategies.

    ERIC Educational Resources Information Center

    Krulewitz, Judith E.; Kahn, Arnold S.

    1983-01-01

    Surveyed 53 female and 36 male college students to examine attitudes on the perceived effectiveness of four rape reduction strategies. Generally aggressive strategies and those placing the locus of responsibility for change upon women were considered most effective. Sex role attitudes were more predictive than subject sex differences. (JAC)

  16. ENERGY CONSERVATION THROUGH SOURCE REDUCTION

    EPA Science Inventory

    This report deals with energy conservation through reduction in generation of post-consumer solid waste. The objective, scope, methodology and summary of the report are presented in Section 1. Section 2 contains the conclusions. Section 3 presents a review of output and input app...

  17. Poverty Reduction Begins with Children.

    ERIC Educational Resources Information Center

    United Nations Children's Fund, New York, NY.

    This report describes how children bear the brunt of poverty and explains why they are central to poverty reduction in developing nations. The report also illustrates UNICEF's support for the process of improving access to, and quality of, health care, education, water and sanitation, and child protection. It describes how the participation of the…

  18. Substructure Search by Set Reduction

    ERIC Educational Resources Information Center

    Figueras, John

    1972-01-01

    The set reduction algorithm is based on set theory and Boolean algebra rather than the graph-theoretic approach. Time trials with a small file of organic chemical structures indicate that the algorithm can be economically used for substructure (or complete structure) sequential searches on a file containing 30,000-50,000 computer-coded structures.…

  19. Zygomatic nonunion after reduction malarplasty.

    PubMed

    Lee, Yoon Ho; Lee, Sang Woo

    2009-05-01

    Reduction malarplasty for making an oval facial shape is popular in Asia. Surgeons generally prefer the intraoral approach to minimize the surgical incision and reduce the operation time between 2 approaches--intraoral and bicoronal approaches. However, fixation can be incomplete because of the narrow operation field, which can result in zygomatic nonunion on the fixation site through the action of the masseter muscle. In the past 5 years, 6 zygomatic nonunion patients who received reduction malarplasty through the intraoral approach visited our hospital with a limitation of mouth opening and a depression on the malar area. In every case, they were corrected by rib bone interpositional or onlay graft and miniplate refixation through a previous intraoral incision. During the follow-up period, the malar area depression was corrected in most cases. However, depression of the lateral orbital rim area remained in 1 patient. Mouth opening was almost normalized after postoperative mouth opening exercises. Zygomatic nonunion after reduction malarplasty is a serious complication that is very difficult to correct. Deep understanding of the anatomy of the malar complex and the action of the masseter muscle and careful consideration of fixation during surgery is essential in reduction malarplasty. PMID:19480043

  20. HEAT ISLAND REDUCTION STRATEGIES GUIDEBOOK

    EPA Science Inventory

    This heat island reduction strategies guidebook provides an overview of urban heat islands and steps communities can take to reduce them. In particular, this guidebook provides background basics and answers the questions: “What is a heat island?” “What are its impacts?" "What ar...

  1. Recursions of Symmetry Orbits and Reduction without Reduction

    NASA Astrophysics Data System (ADS)

    Malykh, Andrei A.; Sheftel, Mikhail B.

    2011-04-01

    We consider a four-dimensional PDE possessing partner symmetries mainly on the example of complex Monge-Ampère equation (CMA). We use simultaneously two pairs of symmetries related by a recursion relation, which are mutually complex conjugate for CMA. For both pairs of partner symmetries, using Lie equations, we introduce explicitly group parameters as additional variables, replacing symmetry characteristics and their complex conjugates by derivatives of the unknown with respect to group parameters. We study the resulting system of six equations in the eight-dimensional space, that includes CMA, four equations of the recursion between partner symmetries and one integrability condition of this system. We use point symmetries of this extended system for performing its symmetry reduction with respect to group parameters that facilitates solving the extended system. This procedure does not imply a reduction in the number of physical variables and hence we end up with orbits of non-invariant solutions of CMA, generated by one partner symmetry, not used in the reduction. These solutions are determined by six linear equations with constant coefficients in the five-dimensional space which are obtained by a three-dimensional Legendre transformation of the reduced extended system. We present algebraic and exponential examples of such solutions that govern Legendre-transformed Ricci-flat Kähler metrics with no Killing vectors. A similar procedure is briefly outlined for Husain equation.

  2. [Substances considered addictive: prohibition, harm reduction and risk reduction].

    PubMed

    Menéndez, Eduardo

    2012-01-01

    Latin America is currently the region with the highest rate of homicides worldwide, and a large part of the killings are linked to so-called organized crime, especially drug trafficking. The trafficking of drugs is a consequence of the illegality of certain substances which - at least presently - is based in and legitimated by biomedical criteria that turns the production, commercialization and often the consumption of certain substances considered addictive into "offenses against health." This text briefly analyzes the two policies formulated and implemented thus far in terms of prohibition and harm reduction, considering the failure of prohibitionism as well as the limitations of harm reduction proposals. The constant and multiple inconsistencies and contradictions of prohibitionism are noted, indicating the necessity of regarding cautiously repeated comments about its "failure." The text proposes the implementation of a policy of risk reduction that includes not only the behavior of individuals and groups, but also the structural dimension, both in economic-political and cultural terms. PMID:23995492

  3. Wind load reduction for heliostats

    SciTech Connect

    Peterka, J.A.; Hosoya, N.; Bienkiewicz, B.; Cermak, J.E.

    1986-05-01

    This report presents the results of wind-tunnel tests supported through the Solar Energy Research Institute (SERI) by the Office of Solar Thermal Technology of the US Department of Energy as part of the SERI research effort on innovative concentrators. As gravity loads on drive mechanisms are reduced through stretched-membrane technology, the wind-load contribution of the required drive capacity increases in percentage. Reduction of wind loads can provide economy in support structure and heliostat drive. Wind-tunnel tests have been directed at finding methods to reduce wind loads on heliostats. The tests investigated primarily the mean forces, moments, and the possibility of measuring fluctuating forces in anticipation of reducing those forces. A significant increase in ability to predict heliostat wind loads and their reduction within a heliostat field was achieved.

  4. The SPIRE Data Reduction Pipeline

    NASA Astrophysics Data System (ADS)

    Rizzo, D.; Lim, T.

    2008-08-01

    This paper describes the data reduction pipeline of the SPIRE instrument for the Herschel Space Observatory. The pipeline is being written in Java and Jython as part of the multi-platform Herschel Common Science System. We concentrate on the algorithmic design of the pipeline based on the analysis of test data. We also discuss some of the alternative designs under consideration and give the reasons for the design adopted.

  5. Americium recovery from reduction residues

    DOEpatents

    Conner, W.V.; Proctor, S.G.

    1973-12-25

    A process for separation and recovery of americium values from container or bomb'' reduction residues comprising dissolving the residues in a suitable acid, adjusting the hydrogen ion concentration to a desired level by adding a base, precipitating the americium as americium oxalate by adding oxalic acid, digesting the solution, separating the precipitate, and thereafter calcining the americium oxalate precipitate to form americium oxide. (Official Gazette)

  6. Opacity incident reduction corrective action

    SciTech Connect

    Levyash, I.G.; Benegal, S.D.; Claase, B.J.M.

    1998-07-01

    This paper illustrates some of the methods used to reduce the number of package boiler opacity incidents at the Consolidated Edison Company of New York, Inc. East River Generating Station. The principal objective was to reduce opacity exceedances caused by the design of boiler auxiliaries. Opacity causes were identified and grouped. A matrix was developed to keep track of repairs and corrections on all package boilers. A special maintenance program was developed to sustain opacity reduction.

  7. The reduction of packaging waste

    SciTech Connect

    Raney, E.A.; Hogan, J.J.; McCollom, M.L.; Meyer, R.J.

    1994-04-01

    Nationwide, packaging waste comprises approximately one-third of the waste disposed in sanitary landfills. the US Department of Energy (DOE) generated close to 90,000 metric tons of sanitary waste. With roughly one-third of that being packaging waste, approximately 30,000 metric tons are generated per year. The purpose of the Reduction of Packaging Waste project was to investigate opportunities to reduce this packaging waste through source reduction and recycling. The project was divided into three areas: procurement, onsite packaging and distribution, and recycling. Waste minimization opportunities were identified and investigated within each area, several of which were chosen for further study and small-scale testing at the Hanford Site. Test results, were compiled into five ``how-to`` recipes for implementation at other sites. The subject of the recipes are as follows: (1) Vendor Participation Program; (2) Reusable Containers System; (3) Shrink-wrap System -- Plastic and Corrugated Cardboard Waste Reduction; (4) Cardboard Recycling ; and (5) Wood Recycling.

  8. Model Reduction in Groundwater Modeling

    NASA Astrophysics Data System (ADS)

    Yeh, W. W. G.

    2014-12-01

    Model reduction has been shown to be a very effective method for reducing the computational burden of large-scale simulations. Model reduction techniques preserve much of the physical knowledge of the system and primarily seek to remove components from the model that do not provide significant information of interest. Proper Orthogonal Decomposition (POD) is a model reduction technique by which a system of ordinary equations is projected onto a much smaller subspace in such a way that the span of the subspace is equal to the span of the original full model space. Basically, the POD technique selects a small number of orthonormal basis functions (principal components) that span the spatial variability of the solutions. In this way the state variable (head) is approximated by a linear combination of these basis functions and, using a Galerkin projection, the dimension of the problem is significantly reduced. It has been shown that for a highly discritized model, the reduced model can be two to three orders of magnitude smaller than the original model and runs 1,000 faster. More importantly, the reduced model captures the dominating characteristics of the full model and produces sufficiently accurate solutions. One of the major tasks in the development of the reduced model is the selection of snapshots which are used to determine the dominant eigenvectors. This paper discusses ways to optimize the snapshot selection. Additionally, the paper also discusses applications of the reduced model to parameter estimation, Monte Carlo simulation and experimental design in groundwater modeling.

  9. The Airframe Noise Reduction Challenge

    NASA Technical Reports Server (NTRS)

    Lockhard, David P.; Lilley, Geoffrey M.

    2004-01-01

    The NASA goal of reducing external aircraft noise by 10 dB in the near-term presents the acoustics community with an enormous challenge. This report identifies technologies with the greatest potential to reduce airframe noise. Acoustic and aerodynamic effects will be discussed, along with the likelihood of industry accepting and implementing the different technologies. We investigate the lower bound, defined as noise generated by an aircraft modified with a virtual retrofit capable of eliminating all noise associated with the high lift system and landing gear. However, the airframe noise of an aircraft in this 'clean' configuration would only be about 8 dB quieter on approach than current civil transports. To achieve the NASA goal of 10 dB noise reduction will require that additional noise sources be addressed. Research shows that energy in the turbulent boundary layer of a wing is scattered as it crosses trailing edge. Noise generated by scattering is the dominant noise mechanism on an aircraft flying in the clean configuration. Eliminating scattering would require changes to much of the aircraft, and practical reduction devices have yet to receive serious attention. Evidence suggests that to meet NASA goals in civil aviation noise reduction, we need to employ emerging technologies and improve landing procedures; modified landing patterns and zoning restrictions could help alleviate aircraft noise in communities close to airports.

  10. Model reduction by manifold boundaries.

    PubMed

    Transtrum, Mark K; Qiu, Peng

    2014-08-29

    Understanding the collective behavior of complex systems from their basic components is a difficult yet fundamental problem in science. Existing model reduction techniques are either applicable under limited circumstances or produce "black boxes" disconnected from the microscopic physics. We propose a new approach by translating the model reduction problem for an arbitrary statistical model into a geometric problem of constructing a low-dimensional, submanifold approximation to a high-dimensional manifold. When models are overly complex, we use the observation that the model manifold is bounded with a hierarchy of widths and propose using the boundaries as submanifold approximations. We refer to this approach as the manifold boundary approximation method. We apply this method to several models, including a sum of exponentials, a dynamical systems model of protein signaling, and a generalized Ising model. By focusing on parameters rather than physical degrees of freedom, the approach unifies many other model reduction techniques, such as singular limits, equilibrium approximations, and the renormalization group, while expanding the domain of tractable models. The method produces a series of approximations that decrease the complexity of the model and reveal how microscopic parameters are systematically "compressed" into a few macroscopic degrees of freedom, effectively building a bridge between the microscopic and the macroscopic descriptions. PMID:25216014

  11. Photochemical reduction of uranyl nitrate

    SciTech Connect

    Duerksen, W.K.

    1993-10-20

    The photochemical reduction of uranyl nitrate solutions to tetravalent uranium was investigated as a means of producing uranium dioxide feed for the saltless direct oxide reduction (SDOR) process. At high uranium concentrations, reoxidation of U{sup +4} occurs rapidly. The kinetics of the nitric oxidation of tetravalent uranium depend on the concentrations of hydrogen ion, nitrate ion, nitrous acid, and tetravalent uranium in the same manner as was reported elsewhere for the nitrate oxidation of PU{sup +3}. Reaction rate data were successfully correlated with a mechanism in which nitrogen dioxide is the reactive intermediate. Addition of a nitrous acid scavenger suppresses the reoxidation reaction. An immersion reactor employing a mercury vapor lamp gave reduction times fast enough for routine production usage. Precipitation techniques for conversion of aqueous U(NO{sub 3}){sub 4} to hydrous UO{sub 2} were evaluated. Prolonged dewatering times tended to make the process time consuming. Use of 3- to 4-M aqueous NaOH gave the best dewatering times observed. Reoxidation of the UO{sub 2} by water of hydration was encountered, which required the drying process to be carried out under a reducing atmosphere.

  12. Model Reduction by Manifold Boundaries

    PubMed Central

    Transtrum, Mark K.; Qiu, Peng

    2015-01-01

    Understanding the collective behavior of complex systems from their basic components is a difficult yet fundamental problem in science. Existing model reduction techniques are either applicable under limited circumstances or produce “black boxes” disconnected from the microscopic physics. We propose a new approach by translating the model reduction problem for an arbitrary statistical model into a geometric problem of constructing a low-dimensional, submanifold approximation to a high-dimensional manifold. When models are overly complex, we use the observation that the model manifold is bounded with a hierarchy of widths and propose using the boundaries as submanifold approximations. We refer to this approach as the manifold boundary approximation method. We apply this method to several models, including a sum of exponentials, a dynamical systems model of protein signaling, and a generalized Ising model. By focusing on parameters rather than physical degrees of freedom, the approach unifies many other model reduction techniques, such as singular limits, equilibrium approximations, and the renormalization group, while expanding the domain of tractable models. The method produces a series of approximations that decrease the complexity of the model and reveal how microscopic parameters are systematically “compressed” into a few macroscopic degrees of freedom, effectively building a bridge between the microscopic and the macroscopic descriptions. PMID:25216014

  13. Supersonic jet shock noise reduction

    NASA Technical Reports Server (NTRS)

    Stone, J. R.

    1984-01-01

    Shock-cell noise is identified to be a potentially significant problem for advanced supersonic aircraft at takeoff. Therefore NASA conducted fundamental studies of the phenomena involved and model-scale experiments aimed at developing means of noise reduction. The results of a series of studies conducted to determine means by which supersonic jet shock noise can be reduced to acceptable levels for advanced supersonic cruise aircraft are reviewed. Theoretical studies were conducted on the shock associated noise of supersonic jets from convergent-divergent (C-D) nozzles. Laboratory studies were conducted on the influence of narrowband shock screech on broadband noise and on means of screech reduction. The usefulness of C-D nozzle passages was investigated at model scale for single-stream and dual-stream nozzles. The effect of off-design pressure ratio was determined under static and simulated flight conditions for jet temperatures up to 960 K. Annular and coannular flow passages with center plugs and multi-element suppressor nozzles were evaluated, and the effect of plug tip geometry was established. In addition to the far-field acoustic data, mean and turbulent velocity distributions were measured with a laser velocimeter, and shadowgraph images of the flow field were obtained.

  14. Mesotherapy for local fat reduction.

    PubMed

    Jayasinghe, S; Guillot, T; Bissoon, L; Greenway, F

    2013-10-01

    Mesotherapy, which is the injection of substances locally into mesodermally derived subcutaneous tissue, developed from empirical observations of a French physician in the 1950s. Although popular in Europe for many medical purposes, it is used for local cosmetic fat reduction in the United States. This paper reviews manuscripts indexed in PubMed/MEDLINE under 'mesotherapy', which pertains to local fat reduction. The history of lipolytic mesotherapy, the physiology of body fat distribution, the mechanism of action of different lipolytic stimulators and their increased efficacy in combination are reviewed. Mesotherapy falls into two categories. Lipolytic mesotherapy using lipolytic stimulators requires more frequent treatments as the fat cells are not destroyed and can refill over time. Ablative mesotherapy destroys fat cells with a detergent, causes inflammation and scarring from the fat necrosis, but requires fewer treatments. The historic and empiric mixing of sodium channel blocking local anaesthetics in mesotherapy solutions inhibits the intended lipolysis. Major mesotherapy safety concerns include injection site infections from poor sterile technique. Cosmetic mesotherapy directs the area from which fat is lost to improve self-image. Studies were of relatively small number, many with limited sample sizes. Future research should be directed towards achieving a Food and Drug Administration indication rather than continuing expansion of off-label use. PMID:23800269

  15. LDRD report nonlinear model reduction

    SciTech Connect

    Segalman, D.; Heinstein, M.

    1997-09-01

    The very general problem of model reduction of nonlinear systems was made tractable by focusing on the very large subclass consisting of linear subsystems connected by nonlinear interfaces. Such problems constitute a large part of the nonlinear structural problems encountered in addressing the Sandia missions. A synthesis approach to this class of problems was developed consisting of: detailed modeling of the interface mechanics; collapsing the interface simulation results into simple nonlinear interface models; constructing system models by assembling model approximations of the linear subsystems and the nonlinear interface models. These system models, though nonlinear, would have very few degrees of freedom. A paradigm problem, that of machine tool vibration, was selected for application of the reduction approach outlined above. Research results achieved along the way as well as the overall modeling of a specific machine tool have been very encouraging. In order to confirm the interface models resulting from simulation, it was necessary to develop techniques to deduce interface mechanics from experimental data collected from the overall nonlinear structure. A program to develop such techniques was also pursued with good success.

  16. Comparison of noise reduction systems

    NASA Astrophysics Data System (ADS)

    Noel, S. D.; Whitaker, R. W.

    1991-06-01

    When using infrasound as a tool for verification, the most important measurement to determine yield has been the peak-to-peak pressure amplitude of the signal. Therefore, there is a need to operate at the most favorable signal-to-noise ratio (SNR) possible. Winds near the ground can degrade the SNR, thereby making accurate signal amplitude measurement difficult. Wind noise reduction techniques were developed to help alleviate this problem; however, a noise reducing system should reduce the noise, and should not introduce distortion of coherent signals. An experiment is described to study system response for a variety of noise reducing configurations to a signal generated by an underground test (UGT) at the Nevada Test Site (NTS). In addition to the signal, background noise reduction is examined through measurements of variance. Sensors using two particular geometries of noise reducing equipment, the spider and the cross appear to deliver the best SNR. Because the spider configuration is easier to deploy, it is now the most commonly used.

  17. Reduction of nitrate in Shewanella

    SciTech Connect

    Gao, Haichun; Yang, Zamin Koo; Barua, Sumitra; Reed, SB; Nealson, Kenneth H.; Fredrikson, JK; Tiedje, James; Zhou, Jizhong

    2009-01-01

    In the genome of Shewanella oneidensis, a napDAGHB gene cluster encoding periplasmic nitrate reductase (NapA) and accessory proteins and an nrfA gene encoding periplasmic nitrite reductase (NrfA) have been identified. These two systems seem to be atypical because the genome lacks genes encoding cytoplasmic membrane electron transport proteins, NapC for NAP and NrfBCD/NrfH for NRF, respectively. Here, we present evidence that reduction of nitrate to ammonium in S. oneidensis is carried out by these atypical systems in a two-step manner. Transcriptional and mutational analyses suggest that CymA, a cytoplasmic membrane electron transport protein, is likely to be the functional replacement of both NapC and NrfH in S. oneidensis. Surprisingly, a strain devoid of napB encoding the small subunit of nitrate reductase exhibited the maximum cell density sooner than the wild type. Further characterization of this strain showed that nitrite was not detected as a free intermediate in its culture and NapB provides a fitness gain for S. oneidensis to compete for nitrate in the environments. On the basis results from mutational analyses of napA, napB, nrfA and napBnrfA in-frame deletion mutants, we propose that NapB is able to favor nitrate reduction by routing electrons to NapA exclusively.

  18. BTU reduction in gas plants

    SciTech Connect

    Bieda, J.A.

    1995-12-01

    Btu reduction in gas plants refers to the measurable amount of energy removed from the gas stream during processing. The unit of measure is the {open_quotes}Btu{close_quotes} (British thermal unit) and it can be calculated for any gas stream by measuring the volume and analyzing the composition. The Btu`s removed in processing represent the gas components converted to natural gas liquids (NGL`s), the fuel burned to effect the gas-phase-to-liquid-phase conversion, and any unmeasured losses between the plant`s inlet meter and residue meter. The sum total of these components is referred to as Plant Btu Reduction, or {open_quotes}PBR{close_quotes}. PBR plays a key role in the plant`s profitability, appearing as the single greatest debit on the plant`s balance sheet. Accordingly, it is critical that the contributing elements are measured accurately. This paper will further attempt to explain the significance of PBR and to demonstrate its calculation.

  19. NOX REMOVAL WITH COMBINED SELECTIVE CATALYTIC REDUCTION AND SELECTIVE NONCATALYTIC REDUCTION: PILOT- SCALE TEST RESULTS

    EPA Science Inventory

    Pilot-scale tests were conducted to develop a combined nitrogen oxide (NOx) reduction technology using both selective catalytic reduction (SCR) and selective noncatalytic reduction (SNCR). A commercially available vanadium-and titatnium-based composite honeycomb catalyst and enh...

  20. PARTICULATE DATA REDUCTION SYSTEM (PADRE) USER GUIDE

    EPA Science Inventory

    The report, a user guide, describes the capabilities and use of the Particulate Data Reduction (PADRE) system, an interactive computer program that facilitates entry, reduction, and analysis of cascade impactor data for particle size distributions. Example sessions are provided t...

  1. 50 CFR 600.1007 - Reduction amendments.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Reduction amendments. 600.1007 Section 600.1007 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC....1007 Reduction amendments. (a) Each reduction amendment may contain provisions that are...

  2. Model reduction methods for control design

    NASA Technical Reports Server (NTRS)

    Dunipace, K. R.

    1988-01-01

    Several different model reduction methods are developed and detailed implementation information is provided for those methods. Command files to implement the model reduction methods in a proprietary control law analysis and design package are presented. A comparison and discussion of the various reduction techniques is included.

  3. 20 CFR 229.65 - Initial reduction.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT SOCIAL SECURITY..., State, or Local Law or Plan § 229.65 Initial reduction. (a) When reduction is effective. A benefit... under a Federal, State, or local law or plan (public disability benefit). The reduction is...

  4. Selected reprints on dataflow and reduction architectures

    SciTech Connect

    Thakkar, S.S.

    1987-01-01

    This reprint collection looks at alternatives to von Neumann architecture: dataflow and reduction architectures and is organized into eight chapters that cover: different dataflow systems; dataflow solution to multiprocessing; dataflow languages and dataflow graphs; functional programming languages and their implementation; uniprocessor architectures that provide support for reduction; parallel graph reduction machines, and hybrid multiprocessor architectures.

  5. 75 FR 76345 - Risk Reduction Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-08

    ...The Rail Safety Improvement Act of 2008 requires the development and implementation of railroad safety risk reduction programs. Risk reduction is a comprehensive, system-oriented approach to safety that determines an operation's level of risk by identifying and analyzing applicable hazards and develops plans to mitigate that risk. Each Risk Reduction Program (RRP) is statutorily required to be......

  6. 24 CFR 35.320 - Hazard reduction.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Hazard reduction. 35.320 Section 35... Provided by a Federal Agency Other Than HUD § 35.320 Hazard reduction. Each owner shall conduct interim controls consistent with the findings of the risk assessment report. Hazard reduction shall be conducted...

  7. Ultrasound-Assisted Distal Radius Fracture Reduction

    PubMed Central

    Socransky, Steve; Skinner, Andrew; Bromley, Mark; Smith, Andrew; Anawati, Alexandre; Middaugh, Jeff; Ross, Peter

    2016-01-01

    Introduction Closed reduction of distal radius fractures (CRDRF) is a commonly performed emergency department (ED) procedure. The use of point-of-care ultrasound (PoCUS) to diagnose fractures and guide reduction has previously been described. The primary objective of this study was to determine if the addition of PoCUS to CRDRF changed the perception of successful initial reduction. This was measured by the rate of further reduction attempts based on PoCUS following the initial clinical determination of achievement of best possible reduction. Methods  We performed a multicenter prospective cohort study, using a convenience sample of adult ED patients presenting with a distal radius fracture to five Canadian EDs. All study physicians underwent standardized PoCUS training for fractures. Standard clinically-guided best possible fracture reduction was initially performed. PoCUS was then used to assess the reduction adequacy. Repeat reduction was performed if deemed indicated. A post-reduction radiograph was then performed. Clinician impression of reduction adequacy was scored on a 5 point Likert scale following the initial clinically-guided reduction and following each PoCUS scan and the post-reduction radiograph. Results  There were 131 patients with 132 distal radius fractures. Twelve cases were excluded prior to analysis. There was no significant difference in the assessment of the initial reduction status by PoCUS as compared to the clinical exam (mean score: 3.8 vs. 3.9; p = 0.370; OR 0.89; 95% CI 0.46 to 1.72; p = 0.87). Significantly fewer cases fell into the uncertain category with PoCUS than with clinical assessment (2 vs 12; p = 0.008). Repeat reduction was performed in 49 patients (41.2%). Repeat reduction led to a significant improvement (p < 0.001) in the PoCUS determined adequacy of reduction (mean score: 4.3 vs 3.1; p < 0.001). In this group, the odds ratio for adequate vs. uncertain or inadequate reduction assessment using PoCUS was 12.5 (95% CI 3

  8. Ultrasound-Assisted Distal Radius Fracture Reduction.

    PubMed

    Socransky, Steve; Skinner, Andrew; Bromley, Mark; Smith, Andrew; Anawati, Alexandre; Middaugh, Jeff; Ross, Peter; Atkinson, Paul

    2016-01-01

    Introduction Closed reduction of distal radius fractures (CRDRF) is a commonly performed emergency department (ED) procedure. The use of point-of-care ultrasound (PoCUS) to diagnose fractures and guide reduction has previously been described. The primary objective of this study was to determine if the addition of PoCUS to CRDRF changed the perception of successful initial reduction. This was measured by the rate of further reduction attempts based on PoCUS following the initial clinical determination of achievement of best possible reduction. Methods  We performed a multicenter prospective cohort study, using a convenience sample of adult ED patients presenting with a distal radius fracture to five Canadian EDs. All study physicians underwent standardized PoCUS training for fractures. Standard clinically-guided best possible fracture reduction was initially performed. PoCUS was then used to assess the reduction adequacy. Repeat reduction was performed if deemed indicated. A post-reduction radiograph was then performed. Clinician impression of reduction adequacy was scored on a 5 point Likert scale following the initial clinically-guided reduction and following each PoCUS scan and the post-reduction radiograph. Results  There were 131 patients with 132 distal radius fractures. Twelve cases were excluded prior to analysis. There was no significant difference in the assessment of the initial reduction status by PoCUS as compared to the clinical exam (mean score: 3.8 vs. 3.9; p = 0.370; OR 0.89; 95% CI 0.46 to 1.72; p = 0.87). Significantly fewer cases fell into the uncertain category with PoCUS than with clinical assessment (2 vs 12; p = 0.008). Repeat reduction was performed in 49 patients (41.2%). Repeat reduction led to a significant improvement (p < 0.001) in the PoCUS determined adequacy of reduction (mean score: 4.3 vs 3.1; p < 0.001). In this group, the odds ratio for adequate vs. uncertain or inadequate reduction assessment using PoCUS was 12.5 (95% CI 3

  9. Continuous reduction of uranium tetrafluoride

    SciTech Connect

    DeMint, A.L.; Maxey, A.W.

    1993-10-21

    Operation of a pilot-scale system for continuous metallothermic reduction of uranium tetrafluoride (UF{sub 4} or green salt) has been initiated. This activity is in support of the development of a cost- effective process to produce uranium-iron (U-Fe) alloy feed for the Uranium-Atomic Vapor Laser Isotope Separation (U-AVLIS) program. To date, five runs have been made to reduce green salt (UF{sub 4}) with magnesium. During this quarter, three runs were made to perfect the feeding system, examine feed rates, and determine the need for a crust breaker/stirrer. No material was drawn off in any of the runs; both product metal and by-product salt were allowed to accumulate in the reactor.

  10. Phase width reduction project summary

    SciTech Connect

    Clark, D.J.; Xie, Z.Q.; McMahan, M. A.

    1999-11-01

    The purpose of the phase width reduction project, 1993--96, was to reduce the phase width of the 88-Inch Cyclotron beam on target from 5--10 ns to 1--2 ns for certain experiments, such as Gammasphere, which use time-of-flight identification. Since reducing the phase width also reduces beam intensity, tuning should be done to also optimize the transmission. The Multi-turn Collimator slits in the cyclotron center region were used to collimate the early turns radially, thus reducing the phase width from about 5 ns to 1--2 ns FWHM for a Gammasphere beam. The effect of the slits on phase width was verified with a Fast Faraday Cup and with particle and gamma-ray detectors in the external beamline.

  11. Greenhouse Gas Reductions: SF6

    SciTech Connect

    Anderson, Diana

    2012-01-01

    Argonne National Laboratory is leading the way in greenhouse gas reductions, particularly with the recapture and recycling of sulfur hexafluoride (SF6). SF6 is a gas used in industry as an anti-arcing agent. It is an extremely potent greenhouse gas — one pound of SF6 is equivalent to 12 tons of carbon dioxide. While the U.S. does not currently regulate SF6 emissions, Argonne is proactively and voluntarily recovering and recycling to reduce SF6 emissions. Argonne saves over 16,000 tons of SF6 from being emitted into the atmosphere each year, and by recycling the gas rather than purchasing it new, we save taxpayers over $208,000 each year.

  12. PLAINS CO2 REDUCTION PARTNERSHIP

    SciTech Connect

    Edward N. Steadman; John A. Harju; Erin M. O'Leary; James A. Sorensen; Daniel J. Daly; Melanie D. Jensen; Thea E. Reikoff

    2005-01-01

    The Plains CO{sub 2} Reduction (PCOR) Partnership continues to make great progress. Task 2 (Technology Deployment) focused on developing information regarding deployment issues to support Task 5 (Modeling and Phase II Action Plans) by providing information to be used to assess CO{sub 2} sequestration opportunities in the PCOR Partnership region. Task 3 (Public Outreach) focused on developing an informational video about CO{sub 2} sequestration. Progress in Task 4 (Sources, Sinks, and Infrastructure) included the continued collection of data regarding CO{sub 2} sources and sinks and data on the performance and costs for CO{sub 2} separation, capture, treatment, and compression for pipeline transportation. Task 5 focused on screening and qualitatively assessing sequestration options. Task 5 activities also continue to be useful in structuring data collection and other activities in Tasks 2, 3, and 5.

  13. PLAINS CO2 REDUCTION PARTNERSHIP

    SciTech Connect

    Edward N. Steadman; John A. Harju; Erin M. O'Leary; James A. Sorensen; Daniel J. Daly; Melanie D. Jensen; Thea E. Reikoff

    2004-10-01

    The Plains CO{sub 2} Reduction (PCOR) Partnership continues to make great progress. Task 2 (Technology Deployment) focused on developing information regarding deployment issues to support Task 5 (Modeling and Phase II Action Plans) by providing information to be used to assess CO{sub 2} sequestration opportunities in the PCOR Partnership region. Task 3 (Public Outreach) focused on developing an informational video about CO{sub 2} sequestration. Progress in Task 4 (Sources, Sinks, and Infrastructure) included the continued collection of data regarding CO{sub 2} sources and sinks and data on the performance and costs for CO{sub 2} separation, capture, treatment, and compression for pipeline transportation. Task 5 focused on screening and qualitatively assessing sequestration options. Task 5 activities also continue to be useful in structuring data collection and other activities in Tasks 2, 3, and 5.

  14. PLAINS CO2 REDUCTION PARTNERSHIP

    SciTech Connect

    Edward N. Steadman

    2004-07-01

    The Plains Co{sub 2} Reduction (PCOR) Partnership continues to make great progress. Task 2 (Technology Deployment) activities have focused on developing information on deployment issues to support Task 5 activities by providing information to be used to assess CO{sub 2} sequestration opportunities in the PCOR Partnership region. Task 3 (Public Outreach) activities have focused on developing an informational video about CO{sub 2} sequestration. Progress in Task 4 (Sources, Sinks, and Infrastructure) has included the continued collection of data regarding CO{sub 2} sources and sinks and data on the performance and costs for CO{sub 2} separation, capture, treatment, and compression for pipeline transportation. Task 5 (Modeling and Phase II Action Plans) activities have focused on screening and qualitatively assessing sequestration options. Task 5 activities also continue to be useful in structuring data collection and other activities in Tasks 2, 3, and 5.

  15. Electrolyte treatment for aluminum reduction

    DOEpatents

    Brown, Craig W.; Brooks, Richard J.; Frizzle, Patrick B.; Juric, Drago D.

    2002-01-01

    A method of treating an electrolyte for use in the electrolytic reduction of alumina to aluminum employing an anode and a cathode, the alumina dissolved in the electrolyte, the treating improving wetting of the cathode with molten aluminum during electrolysis. The method comprises the steps of providing a molten electrolyte comprised of ALF.sub.3 and at least one salt selected from the group consisting of NaF, KF and LiF, and treating the electrolyte by providing therein 0.004 to 0.2 wt. % of a transition metal or transition metal compound for improved wettability of the cathode with molten aluminum during subsequent electrolysis to reduce alumina to aluminum.

  16. Acrylamide reduction in processed foods.

    PubMed

    Hanley, A B; Offen, C; Clarke, M; Ing, B; Roberts, M; Burch, R

    2005-01-01

    The discovery of the formation of acrylamide in fried and baked foods containing high levels of starch and the amino acid asparagine, prompted widespread concern. Both processed and home cooked foods are affected and this has led to the increased study of variations in cooking and processing conditions to minimize formation. While changes in cooking protocols have been in part successful, particularly when lower frying and baking temperatures are used, pretreatments to reduce levels of acrylamide by prevention of formation or acceleration of destruction have been investigated. In this study, a range of pretreatments of grilled potato were investigated and compared with surface washing to remove asparagine and reducing sugars. Synergies were observed between different treatments, and reductions of up to 40% were achieved in a non-optimized system. PMID:16438313

  17. The connector space reduction mechanism

    NASA Technical Reports Server (NTRS)

    Milam, M. Bruce

    1990-01-01

    The Connector Space Reduction Mechanism (CSRM) is a simple device that can reduce the number of electromechanical devices on the Payload Interface Adapter/Station Interface Adapter (PIA/SIA) from 4 to 1. The device uses simplicity to attack the heart of the connector mating problem for large interfaces. The CSRM allows blind mate connector mating with minimal alignment required over short distances. This eliminates potential interface binding problems and connector damage. The CSRM is compatible with G and H connectors and Moog Rotary Shutoff fluid couplings. The CSRM can be used also with less forgiving connectors, as was demonstrated in the lab. The CSRM is NASA-Goddard exclusive design with patent applied for. The CSRM is the correct mechanism for the PIA/SIA interface as well as other similar berthing interfaces.

  18. The Olympics and harm reduction?

    PubMed Central

    2012-01-01

    The current anti-doping policy (‘war on doping’) resembles the ‘war on drugs’ in several aspects, including a zero-tolerance approach, ideology encroaching on human rights and public health principles, high cost using public money for repression and control, and attempts to shape internationally harmonized legal frameworks to attain its aim. Furthermore, even if for different reasons, both wars seem not to be able to attain their objectives, and possibly lead to more harm to society than they can prevent. The Olympic buzz is mounting and we can expect multiple headlines in the media on doping and anti-doping stories related to this event. In this article we describe current anti-doping policy, reflect on its multiple unplanned consequences, and end with a discussion, if lessons learned from harm reduction experiences in the illicit drugs field could be applied to anti-doping. PMID:22788912

  19. Optimality, reduction and collective motion

    PubMed Central

    Justh, Eric W.; Krishnaprasad, P. S.

    2015-01-01

    The planar self-steering particle model of agents in a collective gives rise to dynamics on the N-fold direct product of SE(2), the rigid motion group in the plane. Assuming a connected, undirected graph of interaction between agents, we pose a family of symmetric optimal control problems with a coupling parameter capturing the strength of interactions. The Hamiltonian system associated with the necessary conditions for optimality is reducible to a Lie–Poisson dynamical system possessing interesting structure. In particular, the strong coupling limit reveals additional (hidden) symmetry, beyond the manifest one used in reduction: this enables explicit integration of the dynamics, and demonstrates the presence of a ‘master clock’ that governs all agents to steer identically. For finite coupling strength, we show that special solutions exist with steering controls proportional across the collective. These results suggest that optimality principles may provide a framework for understanding imitative behaviours observed in certain animal aggregations. PMID:27547087

  20. Greenhouse Gas Reductions: SF6

    ScienceCinema

    Anderson, Diana

    2013-04-19

    Argonne National Laboratory is leading the way in greenhouse gas reductions, particularly with the recapture and recycling of sulfur hexafluoride (SF6). SF6 is a gas used in industry as an anti-arcing agent. It is an extremely potent greenhouse gas ? one pound of SF6 is equivalent to 12 tons of carbon dioxide. While the U.S. does not currently regulate SF6 emissions, Argonne is proactively and voluntarily recovering and recycling to reduce SF6 emissions. Argonne saves over 16,000 tons of SF6 from being emitted into the atmosphere each year, and by recycling the gas rather than purchasing it new, we save taxpayers over $208,000 each year.

  1. Nickel-Catalyzed Reductive Couplings.

    PubMed

    Wang, Xuan; Dai, Yijing; Gong, Hegui

    2016-08-01

    The Ni-catalyzed reductive coupling of alkyl/aryl with other electrophiles has evolved to be an important protocol for the construction of C-C bonds. This chapter first emphasizes the recent progress on the Ni-catalyzed alkylation, arylation/vinylation, and acylation of alkyl electrophiles. A brief overview of CO2 fixation is also addressed. The chemoselectivity between the electrophiles and the reactivity of the alkyl substrates will be detailed on the basis of different Ni-catalyzed conditions and mechanistic perspective. The asymmetric formation of C(sp(3))-C(sp(2)) bonds arising from activated alkyl halides is next depicted followed by allylic carbonylation. Finally, the coupling of aryl halides with other C(sp(2))-electrophiles is detailed at the end of this chapter. PMID:27573395

  2. Vapor Phase Catalytic Ammonia Reduction

    NASA Technical Reports Server (NTRS)

    Flynn, Michael T.; Harper, Lynn D. (Technical Monitor)

    1994-01-01

    This paper discusses the development of a Vapor Phase Catalytic Ammonia Reduction (VPCAR) teststand and the results of an experimental program designed to evaluate the potential of the technology as a water purification process. In the experimental program the technology is evaluated based upon product water purity, water recovery rate, and power consumption. The experimental work demonstrates that the technology produces high purity product water and attains high water recovery rates at a relatively high specific power consumption. The experimental program was conducted in 3 phases. In phase I an Igepon(TM) soap and water mixture was used to evaluate the performance of an innovative Wiped-Film Rotating-Disk evaporator and associated demister. In phase II a phenol-water solution was used to evaluate the performance of the high temperature catalytic oxidation reactor. In phase III a urine analog was used to evaluate the performance of the combined distillation/oxidation functions of the processor.

  3. Redundancy reduction in image coding

    NASA Technical Reports Server (NTRS)

    Rahman, Zia-Ur; Alter-Gartenberg, Rachel; Fales, Carl L.; Huck, Friedrich O.

    1993-01-01

    We assess redundancy reduction in image coding in terms of the information acquired by the image-gathering process and the amount of data required to convey this information. A clear distinction is made between the theoretically minimum rate of data transmission, as measured by the entropy of the completely decorrelated data, and the actual rate of data transmission, as measured by the entropy of the encoded (incompletely decorrelated) data. It is shown that the information efficiency of the visual communication channel depends not only on the characteristics of the radiance field and the decorrelation algorithm, as is generally perceived, but also on the design of the image-gathering device, as is commonly ignored.

  4. Noise Reduction of Aircraft Flap

    NASA Technical Reports Server (NTRS)

    Hutcheson, Florence V. (Inventor); Brooks, Thomas F. (Inventor)

    2009-01-01

    A reduction in noise radiating from a side of a deployed aircraft flap is achieved by locating a slot adjacent the side of the flap, and then forcing air out through the slot with a suitable mechanism. One, two or even three or more slots are possible, where the slot is located at one;or more locations selected from a group of locations comprising a top surface of the flap, a bottom surface of the flap, an intersection of the top and side surface of the flap, an intersection of the bottom and side surfaces of the flap, and a side surface of the flap. In at least one embodiment the slot is substantially rectangular. A device for adjusting a rate of the air forced out through the slot can also be provided.

  5. Pyoderma gangrenosum following reduction mammaplasty

    PubMed Central

    Simon, Amy M; Khuthaila, Dana; Hammond, Dennis C; Andres, Albert

    2006-01-01

    The failure of a postoperative local infection to resolve after appropriate antibiotic therapy should prompt consideration of other diagnoses. Reported here is a case of pyoderma gangrenosum, a rare necrotizing disorder, occurring after reduction mammaplasty. The clinical presentation was one of progressive wound deterioration with associated erythema and intense pain. After failure of antibiotic therapy and local wound care, tissue biopsy of the enlarging wound edge confirmed the diagnosis, which then responded rapidly to systemic steroid treatment. Given that the treatment for pyoderma gangrenosum is at odds with the standard treatment for an infection (steroids versus antibiotics), differentiating between the two diagnoses is vital to providing resolution of the process and limiting any untoward scarring resulting from the advancing open wounds that can develop. With this in mind, the physical signs and symptoms that characterize this condition and thus allow early diagnosis are presented, and treatment options discussed. PMID:19554230

  6. 20 CFR 410.540 - Reductions; more than one reduction event.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Reductions; more than one reduction event. 410.540 Section 410.540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL COAL MINE HEALTH...; more than one reduction event. If a reduction for receipt of State benefits (see § 410.520) and...

  7. The anaerobic degradation of organic matter in Danish coastal sediments - Iron reduction, manganese reduction, and sulfate reduction

    NASA Technical Reports Server (NTRS)

    Canfield, Donald E.; Thamdrup, BO; Hansen, Jens W.

    1993-01-01

    A combination of porewater and solid phase analysis as well as a series of sediment incubations are used to quantify organic carbon oxidation by dissimilatory Fe reduction, Mn reduction, and sulfate reduction, in sediments from the Skagerrak (located off the northeast coast of Jutland, Denmark). Solid phase data are integrated with incubation results to define the zones of the various oxidation processes. At S(9), surface Mn enrichments of up to 3.5 wt pct were found, and with such a ready source of Mn, dissimilatory Mn reduction was the only significant anaerobic process of carbon oxidation in the surface 10 cm of the sediment. At S(4) and S(6), active Mn reduction occurred; however, most of the Mn reduction may have resulted from the oxidation of acid volatile sulfides and Fe(2+) rather than by a dissimilatory sulfate. Dissolved Mn(2+) was found to completely adsorb onto sediment containing fully oxidized Mn oxides.

  8. NOx reduction methods and apparatuses

    DOEpatents

    Tonkyn, Russell G.; Barlow, Stephan E.; Balmer, M. Lou; Maupin, Gary D.

    2004-10-26

    A NO.sub.x reduction method includes treating a first gas containing NO.sub.x, producing a second gas containing NO.sub.2, reducing a portion of the NO.sub.2 in the second gas to N.sub.2, and producing a third gas containing less NO.sub.x than the first gas, substantially all of the third gas NO.sub.x being NO. The method also includes treating the third gas, producing a fourth gas containing NO.sub.2, reducing a portion of the NO.sub.2 in the fourth gas to N.sub.2, and producing a fifth gas containing less NO.sub.x than the third gas, substantially all of the fifth gas NO.sub.x being NO. Treating the first and/or third gas can include treatment with a plasma. Reducing a portion of the NO.sub.2 in the second and/or fourth gas can include reducing with a catalyst. The method can further include controlling energy consumption of the plasmas independent of each other.

  9. Software for Probabilistic Risk Reduction

    NASA Technical Reports Server (NTRS)

    Hensley, Scott; Michel, Thierry; Madsen, Soren; Chapin, Elaine; Rodriguez, Ernesto

    2004-01-01

    A computer program implements a methodology, denoted probabilistic risk reduction, that is intended to aid in planning the development of complex software and/or hardware systems. This methodology integrates two complementary prior methodologies: (1) that of probabilistic risk assessment and (2) a risk-based planning methodology, implemented in a prior computer program known as Defect Detection and Prevention (DDP), in which multiple requirements and the beneficial effects of risk-mitigation actions are taken into account. The present methodology and the software are able to accommodate both process knowledge (notably of the efficacy of development practices) and product knowledge (notably of the logical structure of a system, the development of which one seeks to plan). Estimates of the costs and benefits of a planned development can be derived. Functional and non-functional aspects of software can be taken into account, and trades made among them. It becomes possible to optimize the planning process in the sense that it becomes possible to select the best suite of process steps and design choices to maximize the expectation of success while remaining within budget.

  10. PLAINS CO2 REDUCTION PARTNERSHIP

    SciTech Connect

    Edward N. Steadman; John A. Harju; Erin M. O'Leary; James A. Sorensen; Daniel J. Daly; Melanie D. Jensen; Lisa S. Botnen

    2005-07-01

    The Plains CO{sub 2} Reduction (PCOR) Partnership characterization work is nearing completion, and most remaining efforts are related to finalizing work products. Task 2 (Technology Deployment) has developed a Topical Report entitled ''Deployment Issues Related to Geologic CO{sub 2} Sequestration in the PCOR Partnership Region''. Task 3 (Public Outreach) has developed an informational Public Television program entitled ''Nature in the Balance'', about CO{sub 2} sequestration. The program was completed and aired on Prairie Public Television in this quarter. Task 4 (Sources, Sinks, and Infrastructure) efforts are nearing completion, and data regarding CO{sub 2} sources and sinks and data on the performance and costs for CO{sub 2} separation, capture, treatment, and compression for pipeline transportation are being incorporated into a series of topical reports. The expansion of the Decision Support System Geographic Information System database has continued with the development of a ''save bookmark'' feature that allows users to save a map from the system easily. A feature that allows users to develop a report that summarizes CO{sub 2} sequestration parameters was also developed. Task 5 (Modeling and Phase II Action Plans) focused on screening and qualitatively assessing sequestration options and developing economic estimates for important regional CO{sub 2} sequestration strategies.

  11. The maximum drag reduction asymptote

    NASA Astrophysics Data System (ADS)

    Choueiri, George H.; Hof, Bjorn

    2015-11-01

    Addition of long chain polymers is one of the most efficient ways to reduce the drag of turbulent flows. Already very low concentration of polymers can lead to a substantial drag and upon further increase of the concentration the drag reduces until it reaches an empirically found limit, the so called maximum drag reduction (MDR) asymptote, which is independent of the type of polymer used. We here carry out a detailed experimental study of the approach to this asymptote for pipe flow. Particular attention is paid to the recently observed state of elasto-inertial turbulence (EIT) which has been reported to occur in polymer solutions at sufficiently high shear. Our results show that upon the approach to MDR Newtonian turbulence becomes marginalized (hibernation) and eventually completely disappears and is replaced by EIT. In particular, spectra of high Reynolds number MDR flows are compared to flows at high shear rates in small diameter tubes where EIT is found at Re < 100. The research leading to these results has received funding from the People Programme (Marie Curie Actions) of the European Union's Seventh Framework Programme (FP7/2007-2013) under REA grant agreement n° [291734].

  12. Cultural pluralism and prejudice reduction.

    PubMed

    Carpenter, Sandra; Zárate, Michael A; Garza, Azenett A

    2007-04-01

    Predictions derived from models of cultural pluralism and cultural assimilation were tested. Previous research has shown that highlighting differences between ethnic groups, in conjunction with self-focus, can reduce prejudice. The presented research tested the following questions: (a) does highlighting differences function to reduce prejudice between groups that are dissimilar to each other as well as between those that are highly similar, (b) is prejudice reduction due to distinctiveness a function of the lessened ingroup positivity or lessened outgroup negativity, (c) does making distinctiveness salient reduce prejudice toward only the distinctive outgroups or to outgroups more generically, and (d) does the manipulation equally impact African American, Mexican American, Mexican National, and White American participants? Results demonstrated that highlighting differences while simultaneously focusing on the self reduces prejudice, although similarity mediates the relationship with those who are perceived as more different. Distinctiveness also reduced outgroup negativity and generalized to other outgroups. Finally, the manipulation reduced prejudice only for White Americans, Mexican Americans, and Mexican Nationals. PMID:17500597

  13. Selenium and Methionine Sulfoxide Reduction.

    PubMed

    Gladyshev, Vadim N

    2014-10-01

    Selenium is an essential trace element because it is present in proteins in the form of selenocysteine residue. Functionally characterized selenoproteins are oxidoreductases. Selenoprotein methionine-R-sulfoxide reductase B1 (MsrB1) is a repair enzyme that reduces ROS-oxidized methionine residues in proteins. Here, we explored a possibility that reversible methionine oxidation is also a mechanism that regulates protein function. We found that MsrB1, together with Mical proteins, regulated mammalian actin assembly via stereospecific methionine oxidation and reduction in a reversible, site-specific manner. Two methionine residues in actin were specifically converted to methionine-R-sulfoxide by Mical1 and Mical2 and reduced back to methionine by MsrB1, supporting actin disassembly and assembly, respectively. Macrophages utilized this redox control during cellular activation by stimulating MsrB1 expression and activity. Thus, we identified the regulatory role of MsrB1 as a Mical antagonist in orchestrating actin dynamics and macrophage function. More generally, our study showed that proteins can be regulated by reversible site-specific methionine-R-sulfoxidation and that selenium is involved in this regulation by being a catalytic component of MsrB1. PMID:26461418

  14. PLAINS CO2 REDUCTION PARTNERSHIP

    SciTech Connect

    Edward N. Steadman; John A. Harju; Erin M. O'Leary; James A. Sorensen; Daniel J. Daly; Melanie D. Jensen; Thea E. Reikoff

    2005-04-01

    The Plains CO{sub 2} Reduction (PCOR) Partnership continues to make great progress. Task 2 (Technology Deployment) focused on developing information regarding deployment issues to support Task 5 (Modeling and Phase II Action Plans) and provided information to be used to assess CO{sub 2} sequestration opportunities in the PCOR Partnership region. Task 2 efforts also included preparation of a draft topical report entitled ''Deployment Issues Related to Geologic CO{sub 2} Sequestration in the PCOR Partnership Region'', which is nearing completion. Task 3 (Public Outreach) focused on developing an informational video about CO{sub 2} sequestration. The video will be completed and aired on Prairie Public Television in the next quarter. Progress in Task 4 (Sources, Sinks, and Infrastructure) included the continued collection of data regarding CO{sub 2} sources and sinks and data on the performance and costs for CO{sub 2} separation, capture, treatment, and compression for pipeline transportation. The addition of the Canadian province of Alberta to the PCOR Partnership region expanded the decision support system (DSS) geographic information system database. Task 5 screened and qualitatively assessed sequestration options. Task 5 activities also continue to be useful in structuring data collection and other activities in Tasks 2, 3, and 5.

  15. Monoclonal antibody disulfide reduction during manufacturing

    PubMed Central

    Hutterer, Katariina M.; Hong, Robert W.; Lull, Jonathon; Zhao, Xiaoyang; Wang, Tian; Pei, Rex; Le, M. Eleanor; Borisov, Oleg; Piper, Rob; Liu, Yaoqing Diana; Petty, Krista; Apostol, Izydor; Flynn, Gregory C.

    2013-01-01

    Manufacturing-induced disulfide reduction has recently been reported for monoclonal human immunoglobulin gamma (IgG) antibodies, a widely used modality in the biopharmaceutical industry. This effect has been tied to components of the intracellular thioredoxin reduction system that are released upon cell breakage. Here, we describe the effect of process parameters and intrinsic molecule properties on the extent of reduction. Material taken from cell cultures at the end of production displayed large variations in the extent of antibody reduction between different products, including no reduction, when subjected to the same reduction-promoting harvest conditions. Additionally, in a reconstituted model in which process variables could be isolated from product properties, we found that antibody reduction was dependent on the cell line (clone) and cell culture process. A bench-scale model using a thioredoxin/thioredoxin reductase regeneration system revealed that reduction susceptibility depended on not only antibody class but also light chain type; the model further demonstrates that the trend in reducibility was identical to DTT reduction sensitivity following the order IgG1λ > IgG1κ > IgG2λ > IgG2κ. Thus, both product attributes and process parameters contribute to the extent of antibody reduction during production. PMID:23751615

  16. REDUCTION CAPACITY OF SALTSTONE AND SALTSTONE COMPONENTS

    SciTech Connect

    Roberts, K.; Kaplan, D.

    2009-11-30

    The duration that saltstone retains its ability to immobilize some key radionuclides, such as technetium (Tc), plutonium (Pu), and neptunium (Np), depends on its capacity to maintain a low redox status (or low oxidation state). The reduction capacity is a measure of the mass of reductants present in the saltstone; the reductants are the active ingredients that immobilize Tc, Pu, and Np. Once reductants are exhausted, the saltstone loses its ability to immobilize these radionuclides. The reduction capacity values reported here are based on the Ce(IV)/Fe(II) system. The Portland cement (198 {micro}eq/g) and especially the fly ash (299 {micro}eq/g) had a measurable amount of reduction capacity, but the blast furnace slag (820 {micro}eq/g) not surprisingly accounted for most of the reduction capacity. The blast furnace slag contains ferrous iron and sulfides which are strong reducing and precipitating species for a large number of solids. Three saltstone samples containing 45% slag or one sample containing 90% slag had essentially the same reduction capacity as pure slag. There appears to be some critical concentration between 10% and 45% slag in the Saltstone formulation that is needed to create the maximum reduction capacity. Values from this work supported those previously reported, namely that the reduction capacity of SRS saltstone is about 820 {micro}eq/g; this value is recommended for estimating the longevity that the Saltstone Disposal Facility will retain its ability to immobilize radionuclides.

  17. Development of an expert data reduction assistant

    NASA Technical Reports Server (NTRS)

    Miller, Glenn E.; Johnston, Mark D.; Hanisch, Robert J.

    1993-01-01

    We propose the development of an expert system tool for the management and reduction of complex datasets. the proposed work is an extension of a successful prototype system for the calibration of CCD (charge coupled device) images developed by Dr. Johnston in 1987. (ref.: Proceedings of the Goddard Conference on Space Applications of Artificial Intelligence). The reduction of complex multi-parameter data sets presents severe challenges to a scientist. Not only must a particular data analysis system be mastered, (e.g. IRAF/SDAS/MIDAS), large amounts of data can require many days of tedious work and supervision by the scientist for even the most straightforward reductions. The proposed Expert Data Reduction Assistant will help the scientist overcome these obstacles by developing a reduction plan based on the data at hand and producing a script for the reduction of the data in a target common language.

  18. Development of an expert data reduction assistant

    NASA Technical Reports Server (NTRS)

    Miller, Glenn E.; Johnston, Mark D.; Hanisch, Robert J.

    1992-01-01

    We propose the development of an expert system tool for the management and reduction of complex data sets. The proposed work is an extension of a successful prototype system for the calibration of CCD images developed by Dr. Johnston in 1987. The reduction of complex multi-parameter data sets presents severe challenges to a scientist. Not only must a particular data analysis system be mastered, (e.g. IRAF/SDAS/MIDAS), large amounts of data can require many days of tedious work and supervision by the scientist for even the most straightforward reductions. The proposed Expert Data Reduction Assistant will help the scientist overcome these obstacles by developing a reduction plan based on the data at hand and producing a script for the reduction of the data in a target common language.

  19. Noise reduction experience at Hughes Helicopter, Inc.

    NASA Technical Reports Server (NTRS)

    Janakiram, D. S.

    1982-01-01

    Noise reduction is mostly limited to light helicopters whose noise signature is dominated by their tail rotors. It is primarily hardware oriented. Well known noise reduction techniques such as reduction of rotor speeds with an accompanying increase in solidity to maintain performance, engine noise reduction with the use of exhaust mufflers, and acoustic blanketing of transmission and engine compartment are used. The concept of blade phasing as a means of reducing tail rotor noise is also used. Engine noise (exhaust noise), power train noise and airframe noise becomes important at low rotor tip speeds and means must be found to reduce these noise sources if further noise reductions are desired. The use of a special test rig aids in isolating the various noise sources and arriving at the penalties (performance or payload) involved in quieting them. Significant noise reduction are achieved for the light helicopter with minimum performance or weight penalties because of the dominance of a single noise source (the tail rotor).

  20. Robust Derivation of Risk Reduction Strategies

    NASA Technical Reports Server (NTRS)

    Richardson, Julian; Port, Daniel; Feather, Martin

    2007-01-01

    Effective risk reduction strategies can be derived mechanically given sufficient characterization of the risks present in the system and the effectiveness of available risk reduction techniques. In this paper, we address an important question: can we reliably expect mechanically derived risk reduction strategies to be better than fixed or hand-selected risk reduction strategies, given that the quantitative assessment of risks and risk reduction techniques upon which mechanical derivation is based is difficult and likely to be inaccurate? We consider this question relative to two methods for deriving effective risk reduction strategies: the strategic method defined by Kazman, Port et al [Port et al, 2005], and the Defect Detection and Prevention (DDP) tool [Feather & Cornford, 2003]. We performed a number of sensitivity experiments to evaluate how inaccurate knowledge of risk and risk reduction techniques affect the performance of the strategies computed by the Strategic Method compared to a variety of alternative strategies. The experimental results indicate that strategies computed by the Strategic Method were significantly more effective than the alternative risk reduction strategies, even when knowledge of risk and risk reduction techniques was very inaccurate. The robustness of the Strategic Method suggests that its use should be considered in a wide range of projects.

  1. Dissolution and reduction of magnetite by bacteria

    NASA Technical Reports Server (NTRS)

    Kostka, J. E.; Nealson, K. H.

    1995-01-01

    Magnetite (Fe3O4) is an iron oxide of mixed oxidation state [Fe(II), Fe(III)] that contributes largely to geomagnetism and plays a significant role in diagenesis in marine and freshwater sediments. Magnetic data are the primary evidence for ocean floor spreading and accurate interpretation of the sedimentary magnetic record depends on an understanding of the conditions under which magnetite is stable. Though chemical reduction of magnetite by dissolved sulfide is well known, biological reduction has not been considered likely based upon thermodynamic considerations. This study shows that marine and freshwater strains of the bacterium Shewanella putrefaciens are capable of the rapid dissolution and reduction of magnetite, converting millimolar amounts to soluble Fe(II)in a few days at room temperature. Conditions under which magnetite reduction is optimal (pH 5-6, 22-37 degrees C) are consistent with an enzymatic process and not with simple chemical reduction. Magnetite reduction requires viable cells and cell contact, and it appears to be coupled to electron transport and growth. In a minimal medium with formate or lactate as the electron donor, more than 10 times the amount of magnetite was reduced over no carbon controls. These data suggest that magnetite reduction is coupled to carbon metabolism in S. putrefaciens. Bacterial reduction rates of magnetite are of the same order of magnitude as those estimated for reduction by sulfide. If such remobilization of magnetite occurs in nature, it could have a major impact on sediment magnetism and diagenesis.

  2. Metal reduction by spores of Desulfotomaculum reducens.

    PubMed

    Junier, Pilar; Frutschi, Manon; Wigginton, Nicholas S; Schofield, Eleanor J; Bargar, John R; Bernier-Latmani, Rizlan

    2009-12-01

    The bioremediation of uranium-contaminated sites is designed to stimulate the activity of microorganisms able to catalyze the reduction of soluble U(VI) to the less soluble mineral UO(2). U(VI) reduction does not necessarily support growth in previously studied bacteria, but it typically involves viable vegetative cells and the presence of an appropriate electron donor. We characterized U(VI) reduction by the sulfate-reducing bacterium Desulfotomaculum reducens strain MI-1 grown fermentatively on pyruvate and observed that spores were capable of U(VI) reduction. Hydrogen gas - a product of pyruvate fermentation - rather than pyruvate, served as the electron donor. The presence of spent growth medium was required for the process, suggesting that an unknown factor produced by the cells was necessary for reduction. Ultrafiltration of the spent medium followed by U(VI) reduction assays revealed that the factor's molecular size was below 3 kDa. Pre-reduced spent medium displayed short-term U(VI) reduction activity, suggesting that the missing factor may be an electron shuttle, but neither anthraquinone-2,6-disulfonic acid nor riboflavin rescued spore activity in fresh medium. Spores of D. reducens also reduced Fe(III)-citrate under experimental conditions similar to those for U(VI) reduction. This is the first report of a bacterium able to reduce metals while in a sporulated state and underscores the novel nature of the mechanism of metal reduction by strain MI-1. PMID:19601961

  3. Dissolution and reduction of magnetite by bacteria.

    PubMed

    Kostka, J E; Nealson, K H

    1995-10-01

    Magnetite (Fe3O4) is an iron oxide of mixed oxidation state [Fe(II), Fe(III)] that contributes largely to geomagnetism and plays a significant role in diagenesis in marine and freshwater sediments. Magnetic data are the primary evidence for ocean floor spreading and accurate interpretation of the sedimentary magnetic record depends on an understanding of the conditions under which magnetite is stable. Though chemical reduction of magnetite by dissolved sulfide is well known, biological reduction has not been considered likely based upon thermodynamic considerations. This study shows that marine and freshwater strains of the bacterium Shewanella putrefaciens are capable of the rapid dissolution and reduction of magnetite, converting millimolar amounts to soluble Fe(II)in a few days at room temperature. Conditions under which magnetite reduction is optimal (pH 5-6, 22-37 degrees C) are consistent with an enzymatic process and not with simple chemical reduction. Magnetite reduction requires viable cells and cell contact, and it appears to be coupled to electron transport and growth. In a minimal medium with formate or lactate as the electron donor, more than 10 times the amount of magnetite was reduced over no carbon controls. These data suggest that magnetite reduction is coupled to carbon metabolism in S. putrefaciens. Bacterial reduction rates of magnetite are of the same order of magnitude as those estimated for reduction by sulfide. If such remobilization of magnetite occurs in nature, it could have a major impact on sediment magnetism and diagenesis. PMID:11539843

  4. A Reductive Cyclization Approach to Attenol A

    PubMed Central

    La Cruz, Thomas E.; Rychnovsky, Scott D.

    2008-01-01

    A reductive cyclization strategy was applied to the synthesis of attenol A. This non-traditional approach to the spiroacetal structure illustrated several advantages of the reductive cyclization methodology. The attenol A core was formed in a carbon-carbon bond coupling that gave rise to a previously inaccessible spiroacetal epimer, a new method to synthesize thioketene acetals from a phenyl sulfone was realized, and the configurational stability of a non-anomeric spiroacetal was evaluated. A minor by-product in the reductive cyclization reaction was identified that for the first time allowed direct evaluation of the stereoselectivity in a reductive cyclization of a dialkyloxy alkyllithium reagent. PMID:17346087

  5. Wing download reduction using vortex trapping plates

    NASA Technical Reports Server (NTRS)

    Light, Jeffrey S.; Stremel, Paul M.; Bilanin, Alan J.

    1994-01-01

    A download reduction technique using spanwise plates on the upper and lower wing surfaces has been examined. Experimental and analytical techniques were used to determine the download reduction obtained using this technique. Simple two-dimensional wind tunnel testing confirmed the validity of the technique for reducing two-dimensional airfoil drag. Computations using a two-dimensional Navier-Stokes analysis provided insight into the mechanism causing the drag reduction. Finally, the download reduction technique was tested using a rotor and wing to determine the benefits for a semispan configuration representative of a tilt rotor aircraft.

  6. Chromate reduction by rabbit liver aldehyde oxidase

    SciTech Connect

    Banks, R.B.; Cooke, R.T. Jr.

    1986-05-29

    Chromate was reduced during the oxidation of 1-methylnicotinamide chlorine by partially purified rabbit liver aldehyde oxidase. In addition to l-methylnicotinamide, several other electron donor substrates for aldehyde oxidase were able to support the enzymatic chromate reduction. The reduction required the presence of both enzyme and the electron donor substrate. The rate of the chromate reduction was retarded by inhibitors or aldehyde oxidase but was not affected by substrates or inhibitors of xanthine oxidase. These results are consistent with the involvement of aldehyde oxidase in the reduction of chromate by rabbit liver cytosolic enzyme preparations.

  7. Reductive photocatalysis and smart inks.

    PubMed

    Mills, Andrew; Wells, Nathan

    2015-05-21

    Semiconductor-sensitised photocatalysis is a well-established and growing area of research, innovation and commercialisation; the latter being mostly limited to the use of TiO2 as the semiconductor. Most of the work on semiconductor photocatalytic systems uses oxygen as the electron acceptor and explores a wide range of electron donors; such systems can be considered to be examples of oxidative photocatalysis, OP. OP underpins most current examples of commercial self-cleaning materials, such as: glass, tiles, concrete, paint and fabrics. OP, and its myriad of applications, have been reviewed extensively over the years both in this journal and elsewhere. However, the ability of TiO2, and other semiconductor sensitisers, to promote reductive photocatalysis, RP, especially of dyes, is significant and, although less well-known, is of growing importance. In such systems, the source of the electrons is some easily oxidised species, such as glycerol. One recent, significant example of a RP process is with respect to photocatalyst activity indicator inks. paiis, which provide a measure of the activity of a photocatalytic film under test via the rate of change of colour of the dye in the ink coating due to irreversible RP. In contrast, by incorporating the semiconductor sensitiser in the ink, rather than outside it, it is possible to create an effective UV dosimeter, based on RP, which can be used as a sun-burn warning indicator. In the above examples the dye is reduced irreversibly, but when the photocatalyst in an ink is used to reversibly photoreduce a dye, a novel, colourimetric oxygen-sensitive indicator ink can be created, which has commercial potential in the food packaging industry. Finally, if no dye is present in the ink, and the semiconductor photocatalyst-loaded ink film coats an easily reduced substrate, such as a metal oxide film, then it can be used to reduce the latter and so, for example, clean up tarnished steel. The above are examples of smart inks, i

  8. Weight reduction, fertility and contraception.

    PubMed

    Van Der Spuy, Z M; Jacobs, H S

    1983-10-01

    The significance of weight and body composition with regard to the fertile menstrual cycle has excited much interest. There is global imbalance of resources and problems of widespread chronic malnutrition in many 3rd world countries. This emphasizes the great importance of the possible effects of diet, body weight, and body composition on fecundity (ability to reproduce), fertility (reproductive performance), and pregnancy outcome. Frisch and Revelle suggested that a critical body weight is required for a girl to progress through puberty, menstruate, and finally develop ovulatory cycles. They postulated a direct relationship between weight and menarche and suggested that before menarche will occur at least 17% of the body weight needs to be made up of fat. The Frisch hypothesis is not universally accepted, and it seems highly unlikely that a single age unrelated body weight is always the trigger for menarche. Many of the data used in Frische's original studies were derived rather than directly observed. It seems likely that both body weight and composition are important and that the peripheral conversion of androgens to estrogens in fat plays a role in pubertal development, but the actual signal whcih triggers the hypothalamic events leading eventually through puberty to menstruation and ovulation remains unkown. Acute malnutrition, as seen during famine, is assoicated with a dramatic decrease in fertility. It is usually secondary to amenorrhea and annovulation. In developing countries weight related amenorrhea and delayed menarche are largely the result of nutritonal deprivation and the demands of lactation on women of boderline body weight, but a different pattern is seen in Western countries. The outstanding example of weight reduction resulting in infertility is seen in patients with anorexia nervosa. These women have extreme self imposed weight loss, a distorted perception of their body image, and disturbance in their attitude towards their feelings of hunger

  9. REDUCTIONS WITHOUT REGRET: HISTORICAL PERSPECTIVES

    SciTech Connect

    Swegle, J.; Tincher, D.

    2013-09-09

    This is the first of three papers (in addition to an introductory summary) aimed at providing a framework for evaluating future reductions or modifications of the U.S. nuclear force, first by considering previous instances in which nuclear-force capabilities were eliminated; second by looking forward into at least the foreseeable future at the features of global and regional deterrence (recognizing that new weapon systems currently projected will have expected lifetimes stretching beyond our ability to predict the future); and third by providing examples of past or possible undesirable outcomes in the shaping of the future nuclear force, as well as some closing thoughts for the future. This paper examines the circumstances and consequences of the elimination of � The INF-range Pershing II ballistic missile and Gryphon Ground-Launched Cruise Missile (GLCM), deployed by NATO under a dual-track strategy to counter Soviet intermediate-range missiles while pursuing negotiations to limit or eliminate all of these missiles. � The Short-Range Attack Missile (SRAM), which was actually a family of missiles including SRAM A, SRAM B (never deployed), and SRAM II and SRAM T, these last two cancelled during an over-budget/behind-schedule development phase as part of the Presidential Nuclear Initiatives of 1991 and 1992. � The nuclear-armed version of the Tomahawk Land-Attack Cruise Missile (TLAM/N), first limited to shore-based storage by the PNIs, and finally eliminated in deliberations surrounding the 2010 Nuclear Posture Review Report. � The Missile-X (MX), or Peacekeeper, a heavy MIRVed ICBM, deployed in fixed silos, rather than in an originally proposed mobile mode. Peacekeeper was likely intended as a bargaining chip to facilitate elimination of Russian heavy missiles. The plan failed when START II did not enter into force, and the missiles were eliminated at the end of their intended service life. � The Small ICBM (SICBM), or Midgetman, a road-mobile, single

  10. 50 CFR 600.1007 - Reduction amendments.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Reduction amendments. 600.1007 Section 600.1007 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Fishing Capacity Reduction Framework §...

  11. 50 CFR 600.1012 - Reduction loan.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Reduction loan. 600.1012 Section 600.1012 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Fishing Capacity Reduction Framework §...

  12. Reduction in Force: The Legal Aspects.

    ERIC Educational Resources Information Center

    Ware, Martha L.

    Six legal issues surrounding a school district's reduction in force are described in this twelfth chapter in a book on school law. First, the courts generally hold that the school board must prove that a reduction in force (RIF) is inescapable. The second issue revolves around which positions and employees are being eliminated. In deciding such…

  13. Iodine retention during evaporative volume reduction

    DOEpatents

    Godbee, H.W.; Cathers, G.I.; Blanco, R.E.

    1975-11-18

    An improved method for retaining radioactive iodine in aqueous waste solutions during volume reduction is disclosed. The method applies to evaporative volume reduction processes whereby the decontaminated (evaporated) water can be returned safely to the environment. The method generally comprises isotopically diluting the waste solution with a nonradioactive iodide and maintaining the solution at a high pH during evaporation.

  14. 50 CFR 600.1007 - Reduction amendments.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Fishing Capacity Reduction Framework § 600..., notifies bidders, under § 600.1009(e)(3), that reduction contracts then exist between the bidders and the... the United States is fulfilled. (e) If NMFS does not, in accordance with this subpart and any...

  15. Harm Reduction in MSW Substance Abuse Courses

    ERIC Educational Resources Information Center

    Eversman, Michael H.

    2012-01-01

    Professional social work largely has endorsed the empirically supported paradigm of harm reduction in relation to substance abuse issues. Despite literature detailing similarities between social work and harm reduction, little is known about its presence in MSW substance abuse coursework. A purposive sample of 133 social work faculty from…

  16. Large N reduction on coset spaces

    SciTech Connect

    Kawai, Hikaru; Shimasaki, Shinji; Tsuchiya, Asato

    2010-04-15

    As an extension of our previous work concerning the large N reduction on group manifolds, we study the large N reduction on coset spaces. We show that large N field theories on coset spaces are described by certain corresponding matrix models. We also construct Chern-Simons-like theories on group manifolds and coset spaces, and give their reduced models.

  17. SELECTIVE CATALYTIC REDUCTION MERCURY FIELD SAMPLING PROJECT

    EPA Science Inventory

    A lack of data still exists as to the effect of selective catalytic reduction (SCR), selective noncatalytic reduction (SNCR), and flue gas conditioning on the speciation and removal of mercury (Hg) at power plants. This project investigates the impact that SCR, SNCR, and flue gas...

  18. SELECTIVE CATALYTIC REDUCTION MERCURY FIELD SAMPLING PROJECT

    EPA Science Inventory

    The report details an investigation on the effect of selective catalytic reduction (SCR), selective noncatalytic reduction (SNCR), and flue gas conditioning on the speciation and removal of mercury at power plants. If SCR and/or SNCR systems enhance mercury conversion/capture, t...

  19. Energy Cost Reduction for Automotive Service Facilities.

    ERIC Educational Resources Information Center

    Federal Energy Administration, Washington, DC.

    This handbook on energy cost reduction for automotive service facilities consists of four sections. The importance and economic benefits of energy conservation are discussed in the first section. In the second section six energy cost reduction measures are discussed: relamping interior areas; relamping and reducing interior lighting; setting back…

  20. PARTICULATE DATA REDUCTION (PADRE) SYSTEM REFERENCE MANUAL

    EPA Science Inventory

    The report describes how to access and use the Particulate Data Reduction (PADRE) System, an interactive computer program that facilitates entry, reduction, and analysis of cascade impactor data for particle size distributions. It also summarizes its logic and capabilities. The p...

  1. 24 CFR 35.1120 - Hazard reduction.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Hazard reduction. 35.1120 Section... § 35.1120 Hazard reduction. (a) Each PHA shall, in accordance with § 35.1325, abate all lead-based paint and lead-based paint hazards identified in the evaluations conducted pursuant to § 35.1115....

  2. Active{sup 3} noise reduction

    SciTech Connect

    Holzfuss, J.

    1996-06-01

    Noise reduction is a problem being encountered in a variety of applications, such as environmental noise cancellation, signal recovery and separation. Passive noise reduction is done with the help of absorbers. Active noise reduction includes the transmission of phase inverted signals for the cancellation. This paper is about a threefold active approach to noise reduction. It includes the separation of a combined source, which consists of both a noise and a signal part. With the help of interaction with the source by scanning it and recording its response, modeling as a nonlinear dynamical system is achieved. The analysis includes phase space analysis and global radial basis functions as tools for the prediction used in a subsequent cancellation procedure. Examples are given which include noise reduction of speech. {copyright} {ital 1996 American Institute of Physics.}

  3. Reflex: Graphical workflow engine for data reduction

    NASA Astrophysics Data System (ADS)

    ESO Reflex development Team

    2014-01-01

    Reflex provides an easy and flexible way to reduce VLT/VLTI science data using the ESO pipelines. It allows graphically specifying the sequence in which the data reduction steps are executed, including conditional stops, loops and conditional branches. It eases inspection of the intermediate and final data products and allows repetition of selected processing steps to optimize the data reduction. The data organization necessary to reduce the data is built into the system and is fully automatic; advanced users can plug their own modules and steps into the data reduction sequence. Reflex supports the development of data reduction workflows based on the ESO Common Pipeline Library. Reflex is based on the concept of a scientific workflow, whereby the data reduction cascade is rendered graphically and data seamlessly flow from one processing step to the next. It is distributed with a number of complete test datasets so users can immediately start experimenting and familiarize themselves with the system.

  4. Eu doping and reduction into barium orthophosphates

    NASA Astrophysics Data System (ADS)

    Santos, Ricardo D. S.; dos S. Rezende, Marcos V.

    2016-08-01

    We investigated Eu3+ and Eu2+ ion incorporation and the reduction of Eu3+ ions in a LiBaPO4 lattice using atomistic simulations based on lattice energy minimization. We predicted the most probable sites occupied by Eu3+ and Eu2+ ions, and the related charge-compensation mechanisms involved in these substitutions to the most provable reduction agent for Eu reduction. It was found that Eu3+and Eu2+ ions are the most energetically favorable for incorporation at Ba site. In the case of the Eu3+ ion, charge compensation by the LiBa‧ antisite is the most provable. Eu3+ reduction involving a H2 reduction atmosphere is the most favorable. Our results reveal that Eu3+ and Eu2+ position plays an important role in the luminescence characteristic and in the persistent luminescence mechanisms related to LiBaPO4.

  5. Access flow reduction for cardiac failure.

    PubMed

    Bourquelot, Pierre

    2016-03-01

    High-flow in hemodialysis arteriovenous angioaccesses is frequent. It may result in high-output cardiac failure, which should be prevented by fistula flow reduction. The most frequently reported flow reduction procedure is banding but immediate and long-term results are questionable. Alternative techniques are related here with personal results. Juxta-anastomosis "Proximal Radial Artery Ligation" (PRAL) is a very simple and effective reduction technique for side-to-end radio-cephalic fistulas (82 patients; reduction rate [RR]: 54% ± 19%). For brachial artery-based fistulas flow reduction two variants of Revision Using Distal Inflow (RUDI) procedures are used: 1) RUDI-1 using a polytetrafluoroethylene (PTFE) graft or a greater saphenous vein, which we first described in 1989 as "Distal Report of the Arterial Inflow" (35 patients; RR: 53% ± 18%), 2) RUDI-2 procedure, "Transposition of the Radial Artery", which we described in 2009 (47 patients; RR: 66% ± 14%). PMID:26951907

  6. An Efficient Method for Computing All Reducts

    NASA Astrophysics Data System (ADS)

    Bao, Yongguang; Du, Xiaoyong; Deng, Mingrong; Ishii, Naohiro

    In the process of data mining of decision table using Rough Sets methodology, the main computational effort is associated with the determination of the reducts. Computing all reducts is a combinatorial NP-hard computational problem. Therefore the only way to achieve its faster execution is by providing an algorithm, with a better constant factor, which may solve this problem in reasonable time for real-life data sets. The purpose of this presentation is to propose two new efficient algorithms to compute reducts in information systems. The proposed algorithms are based on the proposition of reduct and the relation between the reduct and discernibility matrix. Experiments have been conducted on some real world domains in execution time. The results show it improves the execution time when compared with the other methods. In real application, we can combine the two proposed algorithms.

  7. INDUSTRIAL BOILER RETROFIT FOR NOX CONTROL: COMBINED SELECTIVE NONCATALYTIC REDUCTION AND SELECTIVE CATALYTIC REDUCTION

    EPA Science Inventory

    The paper describes retrofitting and testing a 590 kW (2 MBtu/hr), oil-fired, three-pass, fire-tube package boiler with a combined selective noncatalytic reduction (SNCR) and selective catalytic reduction (SCR) system. The system demonstrated 85% nitrogen oxides (NOx) reduction w...

  8. INHIBITION OF REDUCTIVE DECHLORINATION BY SULFATE REDUCTION IN MICROCOSMS (ABSTRACT ONLY)

    EPA Science Inventory

    High sulfate (>1,000 mg/L) concentrations are potentially problematic for field implementation of in situ bioremediation of chlorinated ethenes because its reduction competes for electron donor with reductive dechlorination. As a result of this competition, reductive dechl...

  9. Airfoil noise reductions through leading edge serrations

    NASA Astrophysics Data System (ADS)

    Narayanan, S.; Chaitanya, P.; Haeri, S.; Joseph, P.; Kim, J. W.; Polacsek, C.

    2015-02-01

    This paper provides an experimental investigation into the use of leading edge (LE) serrations as a means of reducing the broadband noise generated due to the interaction between the aerofoil's LE and impinging turbulence. Experiments are performed on a flat plate in an open jet wind tunnel. Grids are used to generate isotropic homogeneous turbulence. The leading edge serrations are in the form of sinusoidal profiles of wavelengths, λ, and amplitudes, 2h. The frequency and amplitude characteristics are studied in detail in order to understand the effect of LE serrations on noise reduction characteristics and are compared with straight edge baseline flat plates. Noise reductions are found to be insignificant at low frequencies but significant in the mid frequency range (500 Hz-8 kHz) for all the cases studied. The flat plate results are also compared to the noise reductions obtained on a serrated NACA-65 aerofoil with the same serration profile. Noise reductions are found to be significantly higher for the flat plates with a maximum noise reduction of around 9 dB compared with about 7 dB for the aerofoil. In general, it is observed that the sound power reduction level (ΔPWL) is sensitive to the amplitude, 2h of the LE serrations but less sensitive to the serration wavelength, λ. Thus, this paper sufficiently demonstrates that the LE amplitude acts as a key parameter for enhancing the noise reduction levels in flat plates and aerofoils.

  10. NASA's Subsonic Jet Transport Noise Reduction Research

    NASA Technical Reports Server (NTRS)

    Powell, Clemans A.; Preisser, John S.

    2000-01-01

    Although new jet transport airplanes in today s fleet are considerably quieter than the first jet transports introduced about 40 years ago, airport community noise continues to be an important environmental issue. NASA s Advanced Subsonic Transport (AST) Noise Reduction program was begun in 1994 as a seven-year effort to develop technology to reduce jet transport noise 10 dB relative to 1992 technology. This program provides for reductions in engine source noise, improvements in nacelle acoustic treatments, reductions in the noise generated by the airframe, and improvements in the way airplanes are operated in the airport environs. These noise reduction efforts will terminate at the end of 2001 and it appears that the objective will be met. However, because of an anticipated 3-8% growth in passenger and cargo operations well into the 21st Century and the slow introduction of new the noise reduction technology into the fleet, world aircraft noise impact will remain essentially constant until about 2020 to 2030 and thereafter begin to rise. Therefore NASA has begun planning with the Federal Aviation Administration, industry, universities and environmental interest groups in the USA for a new noise reduction initiative to provide technology for significant further reductions.

  11. Reduction of uranium by Desulfovibrio desulfuricans

    USGS Publications Warehouse

    Lovley, D.R.; Phillips, E.J.P.

    1992-01-01

    The possibility that sulfate-reducing microorganisms contribute to U(VI) reduction in sedimentary environments was investigated. U(VI) was reduced to U(IV) when washed cells of sulfate-grown Desulfovibrio desulfuricans were suspended in a bicarbonate buffer with lactate or H2 as the electron donor. There was no U(VI) reduction in the absence of an electron donor or when the cells were killed by heat prior to the incubation. The rates of U(VI) reduction were comparable to those in respiratory Fe(III)-reducing microorganisms. Azide or prior exposure of the cells to air did not affect the ability of D. desulfuricans to reduce U(VI). Attempts to grow D. desulfuricans with U(VI) as the electron acceptor were unsuccessful. U(VI) reduction resulted in the extracellular precipitation of the U(IV) mineral uraninite. The presence of sulfate had no effect on the rate of U(VI) reduction. Sulfate and U(VI) were reduced simultaneously. Enzymatic reduction of U(VI) by D. desulfuricans was much faster than nonenzymatic reduction of U(VI) by sulfide, even when cells of D. desulfuricans were added to provide a potential catalytic surface for the nonenzymatic reaction. The results indicate that enzymatic U(VI) reduction by sulfate-reducing microorganisms may be responsible for the accumulation of U(IV) in sulfidogenic environments. Furthermore, since the reduction of U(VI) to U(IV) precipitates uranium from solution, D. desulfuricans might be a useful organisms for recovering uranium from contaminated waters and waste streams.

  12. Reductive Dechlorination of PCE DNAPL Source Zones

    NASA Astrophysics Data System (ADS)

    Sleep, B. E.; Edwards, E. A.

    2006-12-01

    A numerical modeling study was conducted to evaluate the potential impact of reductive dechlorination on enhancement of dissolution of source zones of perchloroethylene (PCE) dense nonaqueous phase liquid (DNAPL). The model included three-phase (water-gas-NAPL) flow and transport with interphase mass transfer. Reductive dechlorination of PCE to ethene was simulated with Monod kinetics with hydrogen as the direct electron donor. Hydrogen was produced from the transformation of ethanol to propionate and acetate. The model also included growth of dechlorinators, fermenters and methanogens, with methane generation from hydrogenotrophic and aceticlastic methanogenesis. The model was applied to the simulation of a two-dimensional bench scale study of reductive dechlorination of a PCE DNAPL source with biostimulation and bioaugmentation with a known PCE dechlorinating culture. In the bench scale study spatial and temporal variation of dissolved concentrations of chlorinated ethenes, electron donors were monitored. Quantitative PCR was also used to track the spatial and temporal variation of the dechlorinators. In this bench scale study, the maximum enhancement of PCE dissolution was approximately threefold. However, this enhancement was not sustained over the entire study, and apparent rates of PCE dissolution, as indicated by maximum dissolved concentrations of total ethenes, declined with time and increasing extent of source removal. The model was used to examine the impact on enhanced dissolution of reduction in source zone size, repartitioning of transformation products, and gas blockage from methane generation. Reductions in source zone size, coupled with a heterogeneous flow field, led to significant reductions in maximum concentrations measured in the bench scale study. Repartitioning of transformation products led to reductions in the maximum dissolved concentrations of PCE transformation products, leading to an apparent reduction in the enhancement of PCE

  13. Nox reduction system utilizing pulsed hydrocarbon injection

    DOEpatents

    Brusasco, Raymond M.; Penetrante, Bernardino M.; Vogtlin, George E.; Merritt, Bernard T.

    2001-01-01

    Hydrocarbon co-reductants, such as diesel fuel, are added by pulsed injection to internal combustion engine exhaust to reduce exhaust NO.sub.x to N.sub.2 in the presence of a catalyst. Exhaust NO.sub.x reduction of at least 50% in the emissions is achieved with the addition of less than 5% fuel as a source of the hydrocarbon co-reductants. By means of pulsing the hydrocarbon flow, the amount of pulsed hydrocarbon vapor (itself a pollutant) can be minimized relative to the amount of NO.sub.x species removed.

  14. Fundamental limits on NOx reduction by plasma

    SciTech Connect

    Penetrante, B. M., LLNL

    1997-04-07

    This paper discusses the gas-phase reaction mechanisms for removal of NO{sub x} in a plasma. The effect of oxygen content on the competition between the reduction and oxidation processes is discussed. The effect of the electron kinetic energy distribution on the radical production and subsequent chemistry is then discussed in order to predict the best performance that can be achieved for NO{sub x} reduction using the plasma alone. The fundamental limit on the minimum electrical energy consumption that will be required to implement NO{sub x} reduction in any type of plasma reactor is established.

  15. Suspension Hydrogen Reduction of Iron Oxide Concentrates

    SciTech Connect

    H.Y. Sohn

    2008-03-31

    The objective of the project is to develop a new ironmaking technology based on hydrogen and fine iron oxide concentrates in a suspension reduction process. The ultimate objective of the new technology is to replace the blast furnace and to drastically reduce CO2 emissions in the steel industry. The goals of this phase of development are; the performance of detailed material and energy balances, thermochemical and equilibrium calculations for sulfur and phosphorus impurities, the determination of the complete kinetics of hydrogen reduction and bench-scale testing of the suspension reduction process using a large laboratory flash reactor.

  16. Waste source reduction county government case study

    SciTech Connect

    1990-12-31

    Itasca County is located in north-central Minnesota, has a population of 42,000 and is known for its forests and scenic waterways. With Beltrami County, it contains the upper watershed of the Mississippi River. Its major industries are timber and tourism. Itasca County government made a commitment to source reduce its waste as much as possible. Secondarily, what they could not reduce they committed themselves to recycle. The project demonstrates functional reduction in practice. It shows that reduction is a realistic goal for county governments and that reduction can be measured on a waste stream by waste stream basis.

  17. Reduction Mammaplasty and Breast Cancer Screening.

    PubMed

    Ortiz-Pomales, Yan T; Priyanka Handa; Newell, Mary S; Losken, Albert

    2016-04-01

    Breast reduction surgery is one of the most popular procedures performed by plastic surgeons; based on the current literature, it is safe and does not have a negative impact on identifying breast cancer in women. There are no evidence-based data to confirm the utility of unique screening protocols for women planning to undergo reduction surgery or for those who already had reduction. Women undergoing this surgery should not deviate from the current recommendations of screening mammography in women older than 40 years of average risk. Experienced radiologist can readily distinguish postsurgical imaging findings of rearranged breast parenchyma from malignancy. PMID:27012791

  18. Project identification for methane reduction options

    SciTech Connect

    Kerr, T.

    1996-12-31

    This paper discusses efforts directed at reduction in emission of methane to the atmosphere. Methane is a potent greenhouse gas, which on a 20 year timeframe may present a similar problem to carbon dioxide. In addition, methane causes additional problems in the form of smog and its longer atmospheric lifetime. The author discusses strategies for reducing methane emission from several major sources. This includes landfill methane recovery, coalbed methane recovery, livestock methane reduction - in the form of ruminant methane reduction and manure methane recovery. The author presents examples of projects which have implemented these ideas, the economics of the projects, and additional gains which come from the projects.

  19. Effects of bodyweight reduction on sports performance.

    PubMed

    Fogelholm, M

    1994-10-01

    Athletes reduce bodyweight for several reasons: to compete in a lower weight class; to improve aesthetic appearance; or to increase physical performance. Rapid bodyweight reduction (dehydration in 12 to 96 hours), typically with fluid restriction and increased exercise, is used by athletes competing in weight-class events. Gradual bodyweight reduction (over > 1 week) is usually achieved by cutting energy intake to 75 to 130 kJ/kg/day. An intake of 100 kJ/kg/day results in a weekly bodyweight loss of roughly 1kg. Aerobic endurance capacity decreases after rapid bodyweight reduction, but might increase after gradual bodyweight reduction. Maximal oxygen uptake (VO2max) measured as L/min is unchanged or decreased after bodyweight loss, but VO2max measured as ml/kg/min may increase after gradual bodyweight reduction. Anaerobic performance and muscle strength are typically decreased after rapid bodyweight reduction with or without 1 to 3 hours rehydration. When tested after 5 to 24 hours of rehydration, performance is maintained at euhydrated levels. A high carbohydrate diet during bodyweight loss may help in maintaining performance. Anaerobic performance is not affected and strength can increase after gradual bodyweight reduction. Reductions in plasma volume, muscle glycogen content and the buffer capacity of the blood explain decreased performance after rapid bodyweight reduction. During gradual bodyweight loss, slow glycogen resynthesis after training, loss of muscle protein and stress fractures (caused by endocrinological disorders) may affect performance. Athletes' bodyweight goals should be individualised rather than by comparing with other athletes. If the time between weigh-in and competition is < 5 hours, rapid bodyweight reduction should not exceed 4% of bodyweight. If the time interval is longer, a bodyweight reduction < or = 8% might be acceptable. A moderate-energy (100 to 120 kJ/kg/day) and high-carbohydrate (60 to 70% of total energy intake) diet is

  20. Cost reduction in cardiopulmonary and neurology services.

    PubMed

    Wise, P D

    1997-01-01

    A plan was developed and implemented to reduce costs per unit of service in three departments (pulmonary, cardiology, and neurology services), which resulted in a 19% reduction in cost per RVU over two years. These savings were attained primarily by a reduction of supplies and the redesign of work practices, which resulted in a reduction of both personnel and purchased service expenses. The departments have continued to improved the quality of services provided while reducing the costs of these services through this proactive approach to cost-containment. PMID:10166017

  1. Structured building model reduction toward parallel simulation

    SciTech Connect

    Dobbs, Justin R.; Hencey, Brondon M.

    2013-08-26

    Building energy model reduction exchanges accuracy for improved simulation speed by reducing the number of dynamical equations. Parallel computing aims to improve simulation times without loss of accuracy but is poorly utilized by contemporary simulators and is inherently limited by inter-processor communication. This paper bridges these disparate techniques to implement efficient parallel building thermal simulation. We begin with a survey of three structured reduction approaches that compares their performance to a leading unstructured method. We then use structured model reduction to find thermal clusters in the building energy model and allocate processing resources. Experimental results demonstrate faster simulation and low error without any interprocessor communication.

  2. Effective dimension reduction for sparse functional data

    PubMed Central

    YAO, F.; LEI, E.; WU, Y.

    2015-01-01

    Summary We propose a method of effective dimension reduction for functional data, emphasizing the sparse design where one observes only a few noisy and irregular measurements for some or all of the subjects. The proposed method borrows strength across the entire sample and provides a way to characterize the effective dimension reduction space, via functional cumulative slicing. Our theoretical study reveals a bias-variance trade-off associated with the regularizing truncation and decaying structures of the predictor process and the effective dimension reduction space. A simulation study and an application illustrate the superior finite-sample performance of the method. PMID:26566293

  3. 1995 Fast Track: cost reduction and improvement.

    PubMed

    Panzer, R J; Tuttle, D N; Kolker, R M

    1997-01-01

    To respond to a cost reduction crisis, Strong Memorial Hospital implemented an aggressively managed program of accelerated improvement teams. "Fast-track" teams combined the application of many management tools (total quality management, breakthrough thinking, reengineering, etc.) into one problem-solving process. Teams and managers were charged to work on specific cost reduction strategies. Teams were given additional instruction on interpersonal skills such as communication, teamwork, and leadership. Paradoxically, quality improvement in our hospital was advanced more through this effort at cost reduction than had previously been done in the name of quality itself. PMID:10176411

  4. Nitrogen reduction: Molybdenum does it again

    NASA Astrophysics Data System (ADS)

    Schrock, Richard R.

    2011-02-01

    Nature reduces dinitrogen under mild conditions using nitrogenases, the most active of which contains molybdenum and iron. The only abiological dinitrogen reduction catalyst that avoids the harsh conditions of the Haber-Bosch process contains just molybdenum.

  5. NOx reduction in a lignite cyclone furnace

    SciTech Connect

    Melland, C.; O`Connor, D.

    1998-12-31

    Reburning, selective catalytic reduction, and selective noncatalytic reduction techniques have demonstrated some potential for NOx reduction in cyclone boilers. These techniques are costly in terms of both capital and operating costs. Lignite cyclone combustion modeling studies indicated that modifying combustion inside the cyclone barrel could reduce cyclone NOx emissions. The modeling showed that air staging, secondary air basing, flue gas injection and variations in coal moisture content could affect NOx emissions. Short term lignite boiler tests and now longer term boiler operation have confirmed that significant NOx reductions can be accomplished merely by modifying cyclone combustion. The low NOx operation does not appear to significantly impact maintenance, reliability or capacity of the cyclone burner or furnace.

  6. Alcohol policy and harm reduction in Australia.

    PubMed

    Loxley, Wendy; Gray, Dennis; Wilkinson, Celia; Chikritzhs, Tanya; Midford, Richard; Moore, David

    2005-11-01

    With consultations having been held across Australia this year as part of the process of developing a new National Alcohol Strategy, it seemed timely to invite my colleagues from the National Drug Research Institute who are experts in the alcohol field to write this Harm Reduction Digest. The authors have canvassed a range of alcohol policy options and discussed their effectiveness in reducing harm for what is arguably Australia's number one drug problem. Australia's response to alcohol and other drug problems has, historically, been based on 'harm minimization--incorporating supply reduction, demand reduction and harm reduction'. At this time where the policy options for alcohol are being set for the next 5 years in a climate of 'small government', removing restrictions of 'fair competition' in business and a belief in the free market, what does the research have to say about recommended policies and strategies to reduce alcohol-related harm? PMID:16361215

  7. Analog VLSI system for active drag reduction

    SciTech Connect

    Gupta, B.; Goodman, R.; Jiang, F.; Tai, Y.C.; Tung, S.; Ho, C.M.

    1996-10-01

    In today`s cost-conscious air transportation industry, fuel costs are a substantial economic concern. Drag reduction is an important way to reduce costs. Even a 5% reduction in drag translates into estimated savings of millions of dollars in fuel costs. Drawing inspiration from the structure of shark skin, the authors are building a system to reduce drag along a surface. Our analog VLSI system interfaces with microfabricated, constant-temperature shear stress sensors. It detects regions of high shear stress and outputs a control signal to activate a microactuator. We are in the process of verifying the actual drag reduction by controlling microactuators in wind tunnel experiments. We are encouraged that an approach similar to one that biology employs provides a very useful contribution to the problem of drag reduction. 9 refs., 21 figs.

  8. Harm reduction-the cannabis paradox

    PubMed Central

    Melamede, Robert

    2005-01-01

    This article examines harm reduction from a novel perspective. Its central thesis is that harm reduction is not only a social concept, but also a biological one. More specifically, evolution does not make moral distinctions in the selection process, but utilizes a cannabis-based approach to harm reduction in order to promote survival of the fittest. Evidence will be provided from peer-reviewed scientific literature that supports the hypothesis that humans, and all animals, make and use internally produced cannabis-like products (endocannabinoids) as part of the evolutionary harm reduction program. More specifically, endocannabinoids homeostatically regulate all body systems (cardiovascular, digestive, endocrine, excretory, immune, nervous, musculo-skeletal, reproductive). Therefore, the health of each individual is dependant on this system working appropriately. PMID:16179090

  9. 24 CFR 35.320 - Hazard reduction.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Project-Based Assistance... controls consistent with the findings of the risk assessment report. Hazard reduction shall be conducted...

  10. 24 CFR 35.320 - Hazard reduction.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Project-Based Assistance... controls consistent with the findings of the risk assessment report. Hazard reduction shall be conducted...

  11. 24 CFR 35.320 - Hazard reduction.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Project-Based Assistance... controls consistent with the findings of the risk assessment report. Hazard reduction shall be conducted...

  12. 24 CFR 35.320 - Hazard reduction.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Project-Based Assistance... controls consistent with the findings of the risk assessment report. Hazard reduction shall be conducted...

  13. Reductive Dehalogenation of Herbicides by Anaeromyxobacter dehalogenans

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Members of the genus Anaeromyxobacter are well known for their versatile respiratory capabilities, including reductive dehalogenation of phenolic compounds. The widespread distribution of Anaeromyxobacter spp. in the environment suggests their potential significance in biogeochemical cycling includi...

  14. Polarographic reduction behaviour of clay minerals.

    PubMed

    Malik, W U; Gupta, G C

    1968-01-01

    Suspensions of the clay minerals bentonite, kaolinite illite and chlorite have been examined polarographically and reduction waves found. The differences in their behaviour, with and without the addition of surface active reagents, are reported. PMID:18960257

  15. NIH Seeks Reduction in "Indirect Costs."

    ERIC Educational Resources Information Center

    Culliton, Barbara J.

    1983-01-01

    The National Institute of Health (NIH) is currently seeking a reduction in indirect costs associated with the awarding of research funds. Various issues related to these costs, which are causing tension between university administrators and academic researchers, are discussed. (JN)

  16. Resist process optimization for further defect reduction

    NASA Astrophysics Data System (ADS)

    Tanaka, Keiichi; Iseki, Tomohiro; Marumoto, Hiroshi; Takayanagi, Koji; Yoshida, Yuichi; Uemura, Ryouichi; Yoshihara, Kosuke

    2012-03-01

    Defect reduction has become one of the most important technical challenges in device mass-production. Knowing that resist processing on a clean track strongly impacts defect formation in many cases, we have been trying to improve the track process to enhance customer yield. For example, residual type defect and pattern collapse are strongly related to process parameters in developer, and we have reported new develop and rinse methods in the previous papers. Also, we have reported the optimization method of filtration condition to reduce bridge type defects, which are mainly caused by foreign substances such as gels in resist. Even though we have contributed resist caused defect reduction in past studies, defect reduction requirements continue to be very important. In this paper, we will introduce further process improvements in terms of resist defect reduction, including the latest experimental data.

  17. A DATA REDUCTION SYSTEM FOR CASCADE IMPACTORS

    EPA Science Inventory

    The report describes a computer-based data reduction system for cascade impactors. The system utilizes impactor-specific calibration information, together with operating conditions and other pertinent information (e.g., stage weights, sampling duration), to determine particle siz...

  18. Data volume reduction for imaging radar polarimetry

    NASA Technical Reports Server (NTRS)

    Zebker, Howard A. (Inventor); Held, Daniel N. (Inventor); Vanzyl, Jakob J. (Inventor); Dubois, Pascale C. (Inventor); Norikane, Lynne (Inventor)

    1988-01-01

    Two alternative methods are presented for digital reduction of synthetic aperture multipolarized radar data using scattering matrices, or using Stokes matrices, of four consecutive along-track pixels to produce averaged data for generating a synthetic polarization image.

  19. Symmetry reduction for central force problems

    NASA Astrophysics Data System (ADS)

    McLachlan, Robert I.; Modin, Klas; Verdier, Olivier

    2016-09-01

    We given an elementary illustration of symmetry reduction for central force problems, drawing phase portraits of the reduced dynamics as the intersection of Casimir and energy level sets in three dimensions. These systems form a classic example of symplectic reduction which can usefully be compared to the more commonly seen case of the free rigid body. Dedicated to the memory of Jerry Marsden, 1942–2010.

  20. Nitrate reduction in sulfate-reducing bacteria.

    PubMed

    Marietou, Angeliki

    2016-08-01

    Sulfate-reducing bacteria (SRBs) gain their energy by coupling the oxidation of organic substrate to the reduction of sulfate to sulfide. Several SRBs are able to use alternative terminal electron acceptors to sulfate such as nitrate. Nitrate-reducing SRBs have been isolated from a diverse range of environments. In order to be able to understand the significance of nitrate reduction in SRBs, we need to examine the ecology and physiology of the nitrate-reducing SRB isolates. PMID:27364687

  1. Engine bleed air reduction in DC-10

    NASA Technical Reports Server (NTRS)

    Newman, W. H.; Viele, M. R.

    1980-01-01

    An 0.8 percent fuel savings was achieved by a reduction in engine bleed air through the use of cabin air recirculation. The recirculation system was evaluated in revenue service on a DC-10. The cabin remained comfortable with reductions in cabin fresh air (engine bleed air) as much as 50 percent. Flight test verified the predicted fuel saving of 0.8 percent.

  2. [ENDOSCOPIC LUNG VOLUME REDUCTION IN PULMONARY EMPHYSEMA].

    PubMed

    Duysinx, B; Heinen, V; Louis, R; Corhay, J-L

    2015-12-01

    Emphysema is characterized by an irreversible alveolar destruction, a progressive lung hyperinflation and a dysfunction of respiratory muscles. It induces a respiratory functional limitation and a decrease of quality of life. Endoscopic lung volume reduction represents a potential alternative to surgical treatments for advanced heterogeneous emphysema without concomitant surgical morbidity. The different bronchoscopic systems for lung volume reduction currently under evaluation are presented. PMID:26867305

  3. Reduction of metal oxides through mechanochemical processing

    DOEpatents

    Froes, Francis H.; Eranezhuth, Baburaj G.; Senkov, Oleg N.

    2000-01-01

    The low temperature reduction of a metal oxide using mechanochemical processing techniques. The reduction reactions are induced mechanically by milling the reactants. In one embodiment of the invention, titanium oxide TiO.sub.2 is milled with CaH.sub.2 to produce TiH.sub.2. Low temperature heat treating, in the range of 400.degree. C. to 700.degree. C., can be used to remove the hydrogen in the titanium hydride.

  4. Sulfate reduction and methanogenesis in marine sediments

    NASA Technical Reports Server (NTRS)

    Oremland, R. S.; Taylor, B. F.

    1978-01-01

    Methanogenesis and sulfate-reduction were followed in laboratory incubations of sediments taken from tropical seagrass beds. Methanogenesis and sulfate-reduction occurred simultaneously in sediments incubated under N2, thereby indicating that the two processes are not mutually exclusive. Sediments incubated under an atmosphere of H2 developed negative pressures due to the oxidation of H2 by sulfate-respiring bacteria. H2 also stimulated methanogenesis, but methanogenic bacteria could not compete for H2 with the sulfate-respiring bacteria.

  5. Physical chemistry of carbothermic reduction of alumina

    SciTech Connect

    Frank, Robert A.

    1985-09-01

    Production of aluminium, by means of carbothermic reduction of alumina, is discussed. By employing a solvent metal bath to absorb the alumina metal, carbothermic reduction of alumina was accomplished at temperatures 300/degree/C lower than the temperatures reported in the literature. Reduction occurred without the formation of intermediate compounds and without the high volatilization of aluminum bearing species. Reduction of alumina immersed in a solvent bath appeared to be rate limited by chemical reaction control. The rates seemed to be a function of the activity of aluminum in the solvent metal bath. Reduction of alumina particles, above the surface of the bath, seemed to occur via vapor transport with carbon in the particles or in the crucible walls. Mass transport in the gas phase appeared to be rate limiting. The rates seemed to be a function of the distance separating the alumina and carbon sources. With both submerged alumina and alumina particles, increasing the surface area of the alumina increased the rate of reduction. 58 refs., 65 figs., 9 tabs.

  6. Chem-nuclear's midwest volume reduction facility

    SciTech Connect

    Loiselle, V.

    1987-01-01

    The 1985 amendments to the Low-Level Waste Policy Act mandated volume allocation limits for nuclear utilities over a 7-yr period ending December 31, 1992. Under the provisions of the act, nonsited regions of the US, such as the Midwest, have received more stringent volume limitations than the sited regions. Restrictions, however severe, are causing all nuclear utilities to carefully examine the source and volume generation of low-level wastes at their respective plants. Nuclear utilities dry active wastes (DAW), as compared to wet wastes, amount to 50 to 75% of wastes generated. The progress in reducing DAW can now be achieved with volume reduction by supercompaction. Chem-Nuclear established and licensed its Midwest Volume Reduction Facility (MWVRF) to provide an integrated volume reduction service. Although compaction of DAW is not new, supercompaction is. Through millions of pounds-force (as compared to tens of thousands pounds-force currently available from conventional equipment) much greater volume reduction can be achieved. The results of supercompaction is a product that approaches the theoretical density of its solid constituents - a logical and ultimate end point for compaction capability and volume reduction overall. The reduction service, equipment, and the facility interfacing with other services of transportation and disposal and the generator are discussed in detail. As a result of the integrated service, significant savings in waste management and volume allocation can be achieved.

  7. Astronomical Data Reduction Workflows with Reflex

    NASA Astrophysics Data System (ADS)

    Ballester, P.; Bramich, D.; Forchi, V.; Freudling, W.; Garcia-Dabó, C. E.; klein Gebbinck, M.; Modigliani, A.; Moehler, S.; Romaniello, M.

    2014-05-01

    Reflex (http://www.eso.org/reflex) is an environment that provides an easy and flexible way to reduce VLT/VLTI science data using the ESO. Its top-level functionalities are: (1) Reflex allows to graphically specify the sequence in which the data reduction steps are executed, including conditional stops, loops and conditional branches, (2) Reflex makes it easy to inspect the intermediate and final data products and to repeat selected processing steps to optimize the data reduction, (3) the data organization necessary to reduce the data is built into the system and is fully automatic, (4) advanced users can plug-in their own Python or IDL modules and steps into the data reduction sequence, and (5) Reflex supports the development of data reduction workflows based on the ESO Common Pipeline Library. Reflex is based on the concept of a scientific workflow, whereby the data reduction cascade is rendered graphically and data seamlessly flow from one processing step to the next. It is distributed with a number of complete test datasets so that users can immediately start experimenting and familiarize themselves with the system (http://www.eso.org/pipelines). In this demo, we present the latest version of Reflex and its applications for astronomical data reduction processes.

  8. Histopathologic findings in breast reduction specimens.

    PubMed

    Kececi, Yavuz; Tasli, Funda Alkan; Yagcı, Ayse; Sır, Emin; Canpolat, Selin; Vardar, Enver

    2014-04-01

    Reduction mammaplasty is a commonly performed operation for treatment of breast hypertrophy. It allows examination of specimens from a seemingly healthy population. Although there are many publications reporting the incidence of occult breast carcinomas, only a few studies have specifically examined the incidence of other breast lesions in reduction mammaplasty specimens. The authors conducted a single-centre retrospective chart review examining the incidence of benign and precancerous lesions in breast reduction specimens. Both age and the number of tissue sections were evaluated for the association with important pathologic findings. Of the 95 patients who underwent reduction mammaplasty, eight patients (8.4%) had atypical lesions. Fourteen patients (15%) had proliferative and 54 patients (57%) had non-proliferative breast lesions. No occult invasive breast cancer was identified in the breast reduction specimens. The existence of significant pathologic findings was not associated with age (p = 0.231, student t-test). On the other hand, it was found to be associated with the number of tissue sections (p = 0.046, Mann-Whitney U-test). This study reveals that breast reduction specimens should be analyzed histologically since a considerable amount of patients have breast lesions with increased cancer risk. Therefore, this analysis would guide the management of these patients in the follow-up period. PMID:23879776

  9. Algorithmic dimensionality reduction for molecular structure analysis

    PubMed Central

    Brown, W. Michael; Martin, Shawn; Pollock, Sara N.; Coutsias, Evangelos A.; Watson, Jean-Paul

    2008-01-01

    Dimensionality reduction approaches have been used to exploit the redundancy in a Cartesian coordinate representation of molecular motion by producing low-dimensional representations of molecular motion. This has been used to help visualize complex energy landscapes, to extend the time scales of simulation, and to improve the efficiency of optimization. Until recently, linear approaches for dimensionality reduction have been employed. Here, we investigate the efficacy of several automated algorithms for nonlinear dimensionality reduction for representation of trans, trans-1,2,4-trifluorocyclo-octane conformation—a molecule whose structure can be described on a 2-manifold in a Cartesian coordinate phase space. We describe an efficient approach for a deterministic enumeration of ring conformations. We demonstrate a drastic improvement in dimensionality reduction with the use of nonlinear methods. We discuss the use of dimensionality reduction algorithms for estimating intrinsic dimensionality and the relationship to the Whitney embedding theorem. Additionally, we investigate the influence of the choice of high-dimensional encoding on the reduction. We show for the case studied that, in terms of reconstruction error root mean square deviation, Cartesian coordinate representations and encodings based on interatom distances provide better performance than encodings based on a dihedral angle representation. PMID:18715062

  10. Aldehyde Reduction by Cytochrome P450

    PubMed Central

    Amunom, Immaculate; Srivastava, Sanjay; Prough, Russell A.

    2011-01-01

    This protocol describes the procedure for measuring the relative rates of metabolism of the α,β-unsaturated aldehydes, 9-anthracene aldehyde (9-AA) and 4-hydroxy-trans-2-nonenal (4-HNE); specifically the aldehyde reduction reactions of cytochrome P450s (CYPs). These assays can be performed using either liver microsomal or other tissue fractions, spherosome preparations of recombinant CYPs, or recombinant CYPs from other sources. The method used here to study the reduction of a model α,β-unsaturated aldehyde, 9-AA, by CYPs was adapted from the assay used to investigate 9-anthracene oxidation as reported by Marini et al. (Marini et al., 2003). For experiments measuring reduction of the endogenous aldehyde, 4-HNE, the substrate was incubated with CYP in the presence of oxygen and NADPH and the metabolites were separated by High Pressure Liquid Chromatograpy (HPLC), using an adaptation of the method of Srivastava et al. (Srivastava et al., 2010). For study of 9-AA and 4-HNE reduction, the first step involves incubation of the substrate with the CYP in appropriate media, followed by quantification of metabolites through either spectrofluorimetry or analysis by HPLC coupled with a radiometric assay, respectively. Metabolite identification can be achieved by HPLC GC-mass spectrometric analysis. Inhibitors of cytochrome P450 function can be utilized to show the role of the hemoprotein or other enzymes in these reduction reactions. The reduction reactions for CYP’s were not inhibited by either anaerobiosis or inclusion of CO in the gaseous phase of the reaction mixture. These character of these reactions are similar to those reported for some cytochrome P450-catalyzed azo reduction reactions. PMID:21553396

  11. 41 CFR 101-30.701-1 - Item reduction study.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Item reduction study. 101....7-Item Reduction Program § 101-30.701-1 Item reduction study. Item reduction study means the study... so identified, a replacement item shall be proposed. The result of item reduction studies...

  12. 41 CFR 101-30.701-1 - Item reduction study.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 41 Public Contracts and Property Management 2 2011-07-01 2007-07-01 true Item reduction study. 101....7-Item Reduction Program § 101-30.701-1 Item reduction study. Item reduction study means the study... so identified, a replacement item shall be proposed. The result of item reduction studies...

  13. Approximate Symmetry Reduction Approach: Infinite Series Reductions to the KdV-Burgers Equation

    NASA Astrophysics Data System (ADS)

    Jiao, Xiaoyu; Yao, Ruoxia; Zhang, Shunli; Lou, Sen Y.

    2009-11-01

    For weak dispersion and weak dissipation cases, the (1+1)-dimensional KdV-Burgers equation is investigated in terms of approximate symmetry reduction approach. The formal coherence of similarity reduction solutions and similarity reduction equations of different orders enables series reduction solutions. For the weak dissipation case, zero-order similarity solutions satisfy the Painlevé II, Painlevé I, and Jacobi elliptic function equations. For the weak dispersion case, zero-order similarity solutions are in the form of Kummer, Airy, and hyperbolic tangent functions. Higher-order similarity solutions can be obtained by solving linear variable coefficients ordinary differential equations.

  14. Frictional drag reduction by bubble injection

    NASA Astrophysics Data System (ADS)

    Murai, Yuichi

    2014-07-01

    The injection of gas bubbles into a turbulent boundary layer of a liquid phase has multiple different impacts on the original flow structure. Frictional drag reduction is a phenomenon resulting from their combined effects. This explains why a number of different void-drag reduction relationships have been reported to date, while early works pursued a simple universal mechanism. In the last 15 years, a series of precisely designed experimentations has led to the conclusion that the frictional drag reduction by bubble injection has multiple manifestations dependent on bubble size and flow speed. The phenomena are classified into several regimes of two-phase interaction mechanisms. Each regime has inherent physics of bubbly liquid, highlighted by keywords such as bubbly mixture rheology, the spectral response of bubbles in turbulence, buoyancy-dominated bubble behavior, and gas cavity breakup. Among the regimes, bubbles in some selected situations lose the drag reduction effect owing to extra momentum transfer promoted by their active motions. This separates engineers into two communities: those studying small bubbles for high-speed flow applications and those studying large bubbles for low-speed flow applications. This article reviews the roles of bubbles in drag reduction, which have been revealed from fundamental studies of simplified flow geometries and from development of measurement techniques that resolve the inner layer structure of bubble-mixed turbulent boundary layers.

  15. Optimization modeling for industrial waste reduction planning

    SciTech Connect

    Roberge, H.D.; Baetz, B.W. . Dept. of Civil Engineering)

    1994-01-01

    A model is developed for planning the implementation of industrial waste reduction and waste management strategies. The model is based on minimizing the overall cost of waste reduction and waste management for an industrial facility over a certain time period. The problem is formulated as a general mixed integer linear programming (MILP) problem, where the objective function includes capital and operating costs and is subject to a number of constraints that define the system under consideration. The information required to use the modeling approach includes the capital and operating costs of the various options being considered, discount rates, escalation factors, the capacity limitations on various options for waste treatment, disposal and management, as well as treatment efficiencies and the potential for waste reduction. The general modeling approach is applied to a case study facility. The MILP formulation was solved using a commercially available software package. The model could be used by an environmental engineer or a planner in an industry that is conserving implementing waste reduction projects. Ideally, the industry would have generated information on modifications that could reduce their waste generation, as well as information on their current waste management practices. In the event that specific waste reduction projects have not been identified, the economic feasibility of potential future projects could be determined.

  16. Energy Savings from Industrial Water Reductions

    SciTech Connect

    Rao, Prakash; McKane, Aimee; de Fontaine, Andre

    2015-08-03

    Although it is widely recognized that reducing freshwater consumption is of critical importance, generating interest in industrial water reduction programs can be hindered for a variety of reasons. These include the low cost of water, greater focus on water use in other sectors such as the agriculture and residential sectors, high levels of unbilled and/or unregulated self-supplied water use in industry, and lack of water metering and tracking capabilities at industrial facilities. However, there are many additional components to the resource savings associated with reducing site water use beyond the water savings alone, such as reductions in energy consumption, greenhouse gas emissions, treatment chemicals, and impact on the local watershed. Understanding and quantifying these additional resource savings can expand the community of businesses, NGOs, government agencies, and researchers with a vested interest in water reduction. This paper will develop a methodology for evaluating the embedded energy consumption associated with water use at an industrial facility. The methodology developed will use available data and references to evaluate the energy consumption associated with water supply and wastewater treatment outside of a facility’s fence line for various water sources. It will also include a framework for evaluating the energy consumption associated with water use within a facility’s fence line. The methodology will develop a more complete picture of the total resource savings associated with water reduction efforts and allow industrial water reduction programs to assess the energy and CO2 savings associated with their efforts.

  17. Model reduction in the physical coordinate system

    NASA Technical Reports Server (NTRS)

    Yae, K. Harold; Joeng, K. Y.

    1989-01-01

    In the dynamics modeling of a flexible structure, finite element analysis employs reduction techniques, such as Guyan's reduction, to remove some of the insignificant physical coordinates, thus producing a dynamics model that has smaller mass and stiffness matrices. But this reduction is limited in the sense that it removes certain degrees of freedom at a node points themselves in the model. From the standpoint of linear control design, the resultant model is still too large despite the reduction. Thus, some form of the model reduction is frequently used in control design by approximating a large dynamical system with a fewer number of state variables. However, a problem arises from the placement of sensors and actuators in the reduced model, because a model usually undergoes, before being reduced, some form of coordinate transformations that do not preserve the physical meanings of the states. To correct such a problem, a method is developed that expresses a reduced model in terms of a subset of the original states. The proposed method starts with a dynamic model that is originated and reduced in finite element analysis. Then the model is converted to the state space form, and reduced again by the internal balancing method. At this point, being in the balanced coordinate system, the states in the reduced model have no apparent resemblance to those of the original model. Through another coordinate transformation that is developed, however, this reduced model is expressed by a subset of the original states.

  18. The pipeline for the GOSSS data reduction

    NASA Astrophysics Data System (ADS)

    Sota, A.; Maíz Apellániz, J.

    2011-11-01

    The Galactic O-Star Spectroscopic Survey (GOSSS) is an ambitious project that is observing all known Galactic O stars with B < 13 in the blue-violet part of the spectrum with R ˜ 2500. It is based on version 2 of the most complete catalog to date of Galactic O stars with accurate spectral types (v1, Maíz Apellániz et al. 2004; v2, Sota et al. 2008). Given the large amount of data that we are getting (more than 150 nights of observations at three different observatories in the last 4 years) we have developed an automatic spectroscopic reduction pipeline. This pipeline has been programmed in IDL and automates the process of data reduction. It can operate in two modes: automatic data reduction (quicklook) or semi-automatic data reduction (full). In "quicklook", we are able to get rectified and calibrated spectra of all stars of a full night just minutes after the observations. The pipeline automatically identifies the type of image and applies the standard reduction procedure (bias subtraction, flat field correction, application of bad pixel mask, ...). It also extracts all spectra of the stars in one image (including close visual binaries), aligns and merges all spectra of the same star (to increase the signal to noise ratio and to correct defects such as cosmic rays), calibrates in wavelength and rectifies the continuum. The same operations are performed in full mode, but allowing the user to adjust the parameters used in the process.

  19. Effects of breast reduction on pulmonary function.

    PubMed

    Kececi, Yavuz; Dagistan, Seyhan

    2014-01-01

    Macromastia causes several health problems, and reduction surgery alleviates them successfully. The purpose of this study was to investigate whether reduction mammaplasty improves possible impairments on pulmonary functions related to macromastia. Thirty-one patients participated in the study. Pulmonary function tests were performed before and 3 months after surgery with a spirometry. Preoperative and postoperative pulmonary function values were compared using a paired t test. Two patients were found to have mild restriction in preoperative spirometric analysis, and they went to normal range in postoperative analysis. All other patients were assessed as having normal values in both preoperative and postoperative analyses. Preoperative and postoperative forced vital capacity values were 2.72±0.06 and 2.79±0.05 L, respectively. The difference was statistically significant (paired t test, P=0.014). The other parameter in which breast reduction had statistically significant improvement was forced vital capacity performed/predicted ratio (paired t test, P=0.041). Additionally, the weight of resected breast tissue correlated significantly with the change of forced vital capacity (Pearson correlation coefficient=0.379, P=0.036). Breast reduction surgery improves the pulmonary function parameters that are mainly influenced by restrictive states. This result led us to consider that macromastia causes a relative restriction in chest wall compliance, and reduction of breast weight may enhance chest wall compliance and improve pulmonary function. PMID:25058756

  20. Bacterial chromate reduction and product characterization

    SciTech Connect

    Mehlhorn, R.J.; Buchanan, B.B.; Leighton, T.

    1992-11-01

    Bacillus subtilis reduced hexavalent chromate to trivalent chromium under either aerobic or anaerobic conditions. Reduction of CR(VI) and appearance of extracellular Cr(III) were demonstrated by electron spin resonance and spectrophotometry. Chromate reduction was stimulated more than five-fold by freeze-thawing, indicating that intracellular reductases or chemical reductants reduce chromate more rapidly than do intact cells. Moderately concentrated cells (10% pellet volume after centrifugation) reduced approximately 40 {mu}M chromate/min (2 mg Cr/1-min) when exposed to 100 {mu}M chromate (5 mg Cr/1). Highly concentrated cells (70% pellet volume) reduced more than 99.8% of 2 mM chromate (100 mg Cr/1) within 15 min. This rate of chromate reduction was of the same order of magnitude as the rate of respiration in aerobic cells. A substantial fraction of the reduction product (ca. 75%) was extracellular Cr(M), which could readily be separated from the cells by centrifugation. At high chromate concentrations, some fraction of reduced CR(VI) appeared to be taken up by cells, consistent with a detection of intracellular paramagnetic products. At low chromate concentrations, undefined growth medium alone reduced Cr(VI), but at a slow rate, relative to cells. Under appropriate conditions, B. subtilis appears to be an organism of choice for detoxifying chromate-contaminated soil and water.

  1. DRAGO . Data Reduction and Analysis Graphical Organizer

    NASA Astrophysics Data System (ADS)

    Paioro, L.; Franzetti, P.; Fumana, M.; Garilli, B.; Scodeggio, M.

    Astronomical surveys performed using the most recent instruments provide an amout of scientific information that was impossible to obtain only a few years ago, and the data acquisition rate and data set complexity keeps increasing. The reduction and analysis of such data implies many elaborations involving different software instruments: visualization tools, reduction procedures, data analysis programs and so on. Two practical needs arise: \\ 1) organize and classify in a customized and intuitive visual way the huge amount of data otherwise difficult to handle; \\ 2) join together, in a unique framework, different software packages, so that the ideal pipeline from raw data reduction to final data analysis works as an unified global system. \\ This global framework must be able to handle different the data models and parameter parsing syntax of the different tools. \\ DRAGO (Data Reduction and Analysis Graphical Organizer) attempts to satisfy these requirements providing: \\ 1) a user customizable graphical organizer software for astronomical data; \\ 2) a global intercomunicating framework that provides a suite of generic reduction and analysis software. It provides a plug-in system to add new user's programs too. \\ \\ See http://cosmos.mi.iasf.cnr.it/pandora .

  2. Arthroscopic reduction-association of the scapholunate.

    PubMed

    Aviles, Alberto J; Lee, Steve K; Hausman, Michael R

    2007-01-01

    The reduction-association scapholunate (RASL) procedure for stabilization of the scapholunate joint is an alternative to soft-tissue procedures that do not maintain normal carpal alignment, despite reports of good symptomatic relief. The RASL procedure--indicated for patients with scapholunate instability or scapholunate dissociation without arthritis and, in selected cases, with stage 1 scapholunate advanced collapse of the wrist--can be performed arthroscopically. Radial midcarpal and 3-4 radiocarpal portals are used to excoriate and prepare the scapholunate joint surfaces. By use of 0.62'' K-wire joysticks in the lunate and distal pole of the scaphoid, the scaphoid undergoes dorsiflexion and supination while the lunate undergoes palmarflexion to achieve reduction. A .35'' guidewire is advanced through the scaphoid waist, across the scapholunate joint to the proximomedial corner of the lunate. Supplemental K-wire fixation, from the scaphoid to the capitatum and lunate to the radius, stabilizes the reduction for placement of a cannulated HBS screw (Orthosurgical Implants, Miami, FL) through a 1-2 portal, while reduction and positioning are confirmed arthroscopically. Arthroscopy facilitates anatomic reduction of the joint, as well as the critically important, precise placement of the cannulated HBS screw, by use of 3 portals rather than the traditional 2-incision approach. PMID:17210436

  3. Origin of the regioselective reduction of chlorins.

    PubMed

    Bruhn, Torsten; Brückner, Christian

    2015-05-15

    The reduction of a free-base chlorin generally forms a bacteriochlorin (BC), while the reduction of the corresponding metallochlorin forms a metalloisobacteriochlorin (M-iBC). This regioselectivity has been long known but was never fully rationalized. In the free-base case, this regioselectivity can be explained using resonance arguments, but the explanations for the regioselectivity in the metallochlorin reactions requires a more sophisticated approach. A combination of DFT-calculated average local ionization energies (ALIEs), thermodynamics of the products, and the transition-state trajectories of reduction reactions of meso-tetraaryl- and β-octaethylchlorins, as their free bases and zinc complexes, now fully delineate the theoretical basis of the reduction regioselectivity. The reactions are kinetically controlled. Steric effects originating in the conformational flexibility of the chlorin macrocycle direct the reactions toward the formation of iBCs. Only when electronic effects are strong enough to override the steric effects are BCs formed. Depending on the substituents present on the chlorin, this regioselectivity may change, but ALIE calculations provide reliable guidelines to predict this. The practical value of this work lies in the presentation of a simple predictive method toward synthetic tetrahydroporphyrins by reduction of chlorins. PMID:25719438

  4. Reduction pneumonoplasty for emphysema. Early results.

    PubMed Central

    Little, A G; Swain, J A; Nino, J J; Prabhu, R D; Schlachter, M D; Barcia, T C

    1995-01-01

    OBJECTIVE: The authors determined the role of Nd:YAG laser reduction pneumonoplasty for selected patients with diffuse emphysema. SUMMARY BACKGROUND DATA: The study is based on the concepts introduced 30 years ago by Brantigan regarding the value of lung reduction surgery in patients with emphysema. The authors used minimally invasive techniques with the hopes of providing appropriate clinical results with the least surgical morbidity. METHODS: Fifty-five patients with advanced symptomatic emphysema were treated with unilateral Nd:YAG laser reduction pneumonoplasty to achieve lung volume reduction. RESULTS: Patients experienced significant improvement in exercise capacity and relief of breathlessness. This correlated with improvement in objective measures of pulmonary function and with reduction in lung volume by radiographic and spirometric measures. Significant associated hospital morbidity and a 5.5% mortality were associated. CONCLUSIONS: These encouraging results with treatment of only one lung will be built on with both sequential lung and simultaneous, bilateral lung treatment protocols. Images Figure 1. Figure 2. PMID:7677465

  5. Porosity reduction in Monterey Formation, California

    SciTech Connect

    Compton, J.S.

    1987-05-01

    Porosity and grain density were determined for different lithologies from throughout a 1.2-km thick section of the Monterey and Sisquoc formations in the Santa Maria basin area, California. Porosity reduction by physical and chemical compaction in the predominantly siliceous sediment is controlled largely by the bulk sediment composition and silica phase transformations. Physical compaction of sediment grains from increasing overburden pressure is responsible for most of the gradual porosity reduction with increasing burial depth in opal-A siliceous ooze and diatomite. The porous, incompressible diatom frustule maintains a high porosity relative to clayey and calcareous sediment. Therefore, a positive correlation exists between porosity and biogenic silica (diatom) content of the sediment. During the opal-A to opal-CT silica phase transformation, solution of the porous diatom frustule and precipitation of cryptocrystalline opal-CT results in a porosity reduction that roughly correlates with the biogenic silica content of the sediment. Local porosity reduction occurs in pore-filling dolomite and chert nodules. Dry bulk density as well as porosity reduction tend to increase with sediment depth. Dolomite and organic matter have the most significant influence on the bulk density because of their respective high and low density. The maximum burial depth of the uplifted and eroded section is estimated by overlapping the porosity-depth relation of average deep-sea siliceous ooze.

  6. Oxidation-reduction capacities of aquifer solids

    SciTech Connect

    Barcelona, M.J.; Holm, T.R.

    1991-01-01

    Oxidation-reduction processes play a major role in the mobility, transport, and fate of inorganic and organic chemical constituents in natural waters. Therefore, the manipulation of redox conditions in natural and treated water systems is assumed to be a common option for the control of contaminant concentrations. Measurements of the oxidation (i.e., of aqueous Cr(2+)) and reduction (i.e., of aqueous Cr2O7(2-) and H2O2) capacities of aquifer solids and groundwater have been made on samples from a sand-and-gravel aquifer. The groundwater contributed less than 1% of the system oxidation or reduction poising capacity. Reduction capacities averaged 0.095, 0.111, and 0.136 mequiv/g of dry solids for oxic, transitional, and reducing Eh conditions, respectively. Measured oxidation capacities averaged 0.4 mequiv/g of dry solids over the range of redox intensity conditions. These capacities represent considerable resistance to the adjustment of redox conditions even at uncontaminated sites. Hydrogen peroxide reduction by aquifer solid samples proceeds rapidly relative to microbially mediated decomposition. The study indicates the need for closer scrutiny of the predictability and cost effectiveness of attempts to manipulate redox conditions in poorly poised aquifer systems.

  7. Lithiation of Silica through Partial Reduction

    SciTech Connect

    Ban, C.; Kappes, B. B.; Xu, Q.; Engtrakul, C.; Ciobanu, C. V.; Dillon, A. C.; Zhao, Y.

    2012-06-11

    We demonstrate the reversible lithiation of SiO{sub 2} up to 2/3 Li per Si, and propose a mechanism for it based on molecular dynamics and density functional theory simulations. Our calculations show that neither interstitial Li (no reduction), nor the formation of Li{sub 2}O clusters and Si-Si bonds (full reduction) are energetically favorable. Rather, two Li effectively break a Si-O bond and become stabilized by oxygen, thus partially reducing the SiO{sub 2} anode: this leads to increased anode capacity when the reduction occurs at the Si/SiO{sub 2} interface. The resulting Li{sub x}SiO{sub 2} (x < 2/3) compounds have band-gaps in the range of 2.0-3.4 eV.

  8. UniPOPS: Unified data reduction suite

    NASA Astrophysics Data System (ADS)

    Maddalena, Ronald J.; Garwood, Robert W.; Salter, Christopher J.; Stobie, Elizabeth B.; Cram, Thomas R.; Morgan, Lorrie; Vance, Bob; Hudson, Jerome

    2015-03-01

    UniPOPS, a suite of programs and utilities developed at the National Radio Astronomy Observatory (NRAO), reduced data from the observatory's single-dish telescopes: the Tucson 12-m, the Green Bank 140-ft, and archived data from the Green Bank 300-ft. The primary reduction programs, 'line' (for spectral-line reduction) and 'condar' (for continuum reduction), used the People-Oriented Parsing Service (POPS) as the command line interpreter. UniPOPS unified previous analysis packages and provided new capabilities; development of UniPOPS continued within the NRAO until 2004 when the 12-m was turned over to the Arizona Radio Observatory (ARO). The submitted code is version 3.5 from 2004, the last supported by the NRAO.

  9. Consistent Pauli reduction on group manifolds

    NASA Astrophysics Data System (ADS)

    Baguet, A.; Pope, C. N.; Samtleben, H.

    2016-01-01

    We prove an old conjecture by Duff, Nilsson, Pope and Warner asserting that the NSsbnd NS sector of supergravity (and more general the bosonic string) allows for a consistent Pauli reduction on any d-dimensional group manifold G, keeping the full set of gauge bosons of the G × G isometry group of the bi-invariant metric on G. The main tool of the construction is a particular generalised Scherk-Schwarz reduction ansatz in double field theory which we explicitly construct in terms of the group's Killing vectors. Examples include the consistent reduction from ten dimensions on S3 ×S3 and on similar product spaces. The construction is another example of globally geometric non-toroidal compactifications inducing non-geometric fluxes.

  10. Kuechemann Carrots for transonic drag reduction.

    NASA Astrophysics Data System (ADS)

    Bechert, D. W.; Hage, W.; Stanewsky, E.

    1999-11-01

    Wave drag reduction bodies on the suction side of transonic wings are investigated. Following the original invention by O. Frenzl (1942), subsequently, such bodies have been suggested by Kuechemann and Whitcomb. These devices have been used sucessfully on various TUPOLEV aircraft and on the CONVAIR 990 airliner. New transonic wind tunnel data from an unswept wing with an array of Kuechemann Carrots are presented (airfoil: CAST 10/DOA-2). In a certain parameter range (M= 0.765-0.86) the measurements exhibit a significant reduction of the shock strength on a wing between the Kuechemann Carrots. This entails a dramatic reduction of drag, in a certain Mach number and angular regime up to 50-60%.

  11. Empirical Model Reduction of Spinning Solar Sail

    NASA Astrophysics Data System (ADS)

    Yamazaki, Masahiko; Miyazaki, Yasuyuki

    The Spinning solar sail is expected to be a future space exploration system. Considering the dynamic deformation of the sail membrane is an indispensable factor in designing the spacecraft. But the mathematical model of the sail membrane is complex. Computational analysis is difficult and time consuming. Therefore this has a negative impact on simulation, design and control problems. The model reduction technique is required to shorten the design period. It is a necessary step in order to put the gossamer structure to practical use. In this presentation, the dynamic property of the square type spinning solar sail is revealed, and the requirements for constructing a reduction model are revealed. Then, empirical model reduction techniques are applied to gossamer structures, and the issue of constructing a low-order model is summarized.

  12. Drag Reduction Tests on Supersonic Transport Design

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Langley researchers recently completed supersonic tests in the Unitary Plan Wind Tunnel on a nonlinear design for a supersonic transport. Although the drag reduction measured during the tests was not as great as that predicted using computational methods, significant drag reductions were achieved. Future tests will be conducted at a higher Reynolds number, which will be more representative of flight conditions. These tests will be used to identify a supersonic transport configuration that provides maximum drag reduction. Reducing drag decreases operating cost by improving fuel consumption and lowering aircraft weight. As a result, this research has the potential to help make a future high-speed civil transport (HSCT) an affordable means of travel for the flying public.

  13. 75 FR 18787 - Advisory Committee on Earthquake Hazards Reduction Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-13

    ... National Institute of Standards and Technology Advisory Committee on Earthquake Hazards Reduction Meeting... meeting. SUMMARY: The Advisory Committee on Earthquake Hazards Reduction (ACEHR or Committee), will hold a... Earthquake Hazards Reduction Program Director, National Institute of Standards and Technology, 100...

  14. 75 FR 75457 - Advisory Committee on Earthquake Hazards Reduction Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-03

    ... National Institute of Standards and Technology Advisory Committee on Earthquake Hazards Reduction Meeting... meeting. SUMMARY: The Advisory Committee on Earthquake Hazards Reduction (ACEHR or Committee), will hold a... Earthquake Hazards Reduction Program Director, National Institute of Standards and Technology, 100...

  15. 77 FR 18792 - Advisory Committee on Earthquake Hazards Reduction Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-28

    ... National Institute of Standards and Technology Advisory Committee on Earthquake Hazards Reduction Meeting... meeting. SUMMARY: The Advisory Committee on Earthquake Hazards Reduction (ACEHR or Committee), will hold a... Earthquake Hazards Reduction Program Director, National Institute of Standards and Technology, 100...

  16. 76 FR 64325 - Advisory Committee on Earthquake Hazards Reduction Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-18

    ... National Institute of Standards and Technology Advisory Committee on Earthquake Hazards Reduction Meeting... meeting. SUMMARY: The Advisory Committee on Earthquake Hazards Reduction (ACEHR or Committee), will meet... Directive/PPD-8: National Preparedness to National Earthquake Hazards Reduction Program (NEHRP)...

  17. 77 FR 64314 - Advisory Committee on Earthquake Hazards Reduction Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-19

    ... National Institute of Standards and Technology Advisory Committee on Earthquake Hazards Reduction Meeting... meeting. SUMMARY: The Advisory Committee on Earthquake Hazards Reduction (ACEHR or Committee), will meet... needs for existing buildings, to review the National Earthquake Hazards Reduction Program (NEHRP)...

  18. 76 FR 18165 - Advisory Committee on Earthquake Hazards Reduction Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-01

    ... National Institute of Standards and Technology Advisory Committee on Earthquake Hazards Reduction Meeting... meeting. ] SUMMARY: The Advisory Committee on Earthquake Hazards Reduction (ACEHR or Committee), will hold... be sent to National Earthquake Hazards Reduction Program Director, National Institute of...

  19. 77 FR 27439 - Advisory Committee on Earthquake Hazards Reduction Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-10

    ... National Institute of Standards and Technology Advisory Committee on Earthquake Hazards Reduction Meeting... meeting. SUMMARY: The Advisory Committee on Earthquake Hazards Reduction (ACEHR or Committee), will hold a... Earthquake Hazards Reduction Program Director, National Institute of Standards and Technology, 100...

  20. 75 FR 8042 - Advisory Committee on Earthquake Hazards Reduction Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-23

    ... National Institute of Standards and Technology Advisory Committee on Earthquake Hazards Reduction Meeting... meeting. SUMMARY: The Advisory Committee on Earthquake Hazards Reduction (ACEHR or Committee), will hold a.... Jack Hayes, National Earthquake Hazards Reduction Program Director, National Institute of Standards...

  1. 77 FR 19224 - Advisory Committee on Earthquake Hazards Reduction Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-30

    ... National Institute of Standards and Technology Advisory Committee on Earthquake Hazards Reduction Meeting... meeting. SUMMARY: The Advisory Committee on Earthquake Hazards Reduction (ACEHR or Committee), will hold a... Earthquake Hazards Reduction Program Director, National Institute of Standards and Technology, 100...

  2. Perchlorate reduction by microbes inhabiting oil reservoirs

    NASA Astrophysics Data System (ADS)

    Liebensteiner, Martin; Stams, Alfons; Lomans, Bart

    2014-05-01

    Microbial perchlorate and chlorate reduction is a unique type of anaerobic respiration as during reduction of (per)chlorate chlorite is formed, which is then split into chloride and molecular oxygen. In recent years it was demonstrated that (per)chlorate-reducing bacteria may employ oxygenase-dependent pathways for the degradation of aromatic and aliphatic hydrocarbons. These findings suggested that (per)chlorate may be used as oxygen-releasing compound in anoxic environments that contain hydrocarbons, such as polluted soil sites and oil reservoirs. We started to study perchlorate reduction by microbes possibly inhabiting oil reservoirs. One of the organisms studied was Archaeoglobus fulgidus. This extremely thermophilic archaeon is known as a major contributor to souring in hot oil reservoirs. A. fulgidus turned out to be able to use perchlorate as terminal electron acceptor for growth with lactate (Liebensteiner et al 2013). Genome based physiological experiments indicated that A. fulgidus possesses a novel perchlorate reduction pathway. Perchlorate is first reduced to chlorite, but chlorite is not split into chloride and molecular oxygen as occurs in bacteria. Rather, chlorite reacts chemically with sulfide, forming oxidized sulfur compounds, which are reduced to sulfide in the electron transport chain by the archaeon. The dependence of perchlorate reduction on sulfur compounds could be shown. The implications of our findings as novel strategy for microbiological enhanced oil recovery and for souring mitigation are discussed. Liebensteiner MG, Pinkse MWH, Schaap PJ, Stams AJM and Lomans BP (2013) Archaeal (per)chlorate reduction at high temperature, a matter of abiotic-biotic reactions. Science 340: 85-87

  3. Direct electrochemical reduction of metal-oxides

    DOEpatents

    Redey, Laszlo I.; Gourishankar, Karthick

    2003-01-01

    A method of controlling the direct electrolytic reduction of a metal oxide or mixtures of metal oxides to the corresponding metal or metals. A non-consumable anode and a cathode and a salt electrolyte with a first reference electrode near the non-consumable anode and a second reference electrode near the cathode are used. Oxygen gas is produced and removed from the cell. The anode potential is compared to the first reference electrode to prevent anode dissolution and gas evolution other than oxygen, and the cathode potential is compared to the second reference electrode to prevent production of reductant metal from ions in the electrolyte.

  4. Automated reduction of instantaneous flow field images

    NASA Technical Reports Server (NTRS)

    Reynolds, G. A.; Short, M.; Whiffen, M. C.

    1987-01-01

    An automated data reduction system for the analysis of interference fringe patterns obtained using the particle image velocimetry technique is described. This system is based on digital image processing techniques that have provided the flexibility and speed needed to obtain more complete automation of the data reduction process. As approached here, this process includes scanning/searching for data on the photographic record, recognition of fringe patterns of sufficient quality, and, finally, analysis of these fringes to determine a local measure of the velocity magnitude and direction. The fringe analysis as well as the fringe image recognition are based on full frame autocorrelation techniques using parallel processing capabilities.

  5. Carbon dioxide reduction by the Bosch process

    NASA Technical Reports Server (NTRS)

    Manning, M. P.; Reid, R. C.

    1975-01-01

    Prototype units for carrying out the reduction of carbon dioxide to elementary carbon have been built and operated successfully. In some cases, however, startup difficulties have been reported. Moreover, the recycle reactor product has been reported to contain only small amounts of water and undesirably high yields of methane. This paper presents the results of the first phase of an experimental study that was carried out to define the mechanisms occurring in the reduction process. Conclusions are drawn and possible modifications to the present recycle process are suggested.

  6. Low-Cost Radon Reduction Pilot Study

    SciTech Connect

    Rose, William B.; Francisco, Paul W.; Merrin, Zachary

    2015-09-01

    The aim of the research was to conduct a primary scoping study on the impact of air sealing between the foundation and the living space on radon transport reduction across the foundation-living space floor assembly. Fifteen homes in the Champaign, Illinois area participated in the study. These homes were instrumented for hourly continuous radon measurements and simultaneous temperature and humidity the foundation was improved. However, this improved isolation did not lead to significant reductions in radon concentration in the living space. Other factors such as outdoor temperature were shown to have an impact on radon concentration.

  7. Drag reduction of a hairy disk

    NASA Astrophysics Data System (ADS)

    Niu, Jun; Hu, David L.

    2011-10-01

    We investigate experimentally the hydrodynamics of a hairy disk immersed in a two-dimensional flowing soap film. Drag force is measured as a function of hair length, density, and coating area. An optimum combination of these parameters yields a drag reduction of 17%, which confirms previous numerical predictions (15%). Flow visualization indicates the primary mechanism for drag reduction is the bending, adhesion, and reinforcement of hairs trailing the disk, which reduces wake width and traps "dead water." Thus, the use of hairy coatings can substantially reduce an object's drag while negligibly increasing its weight.

  8. Effect of nitrate on microbial perchlorate reduction

    NASA Astrophysics Data System (ADS)

    Sun, Y.; Coates, J. D.

    2007-12-01

    Over the last decade perchlorate has been recognized as an important emerging water contaminant that poses a significant public health threat. Because of its chemical stability, low ionic charge density, and significant water solubility microbial remediation has been identified as the most feasible method for its in situ attenuation. Our previous studies have demonstrated that dissimilatory perchlorate reducing bacteria (DPRB) capable of the respiratory reduction of perchlorate into innocuous chloride are ubiquitous in soil and sedimentary environments. As part of their metabolism these organisms reduce perchlorate to chlorite which is subsequently dismutated into chloride and molecular oxygen. These initial steps are mediated by the perchlorate reductase and chlorite dismutase enzymes respectively. Previously we found that the activity of these organisms is dependent on the presence of molybdenum and is inhibited by the presence of oxygen and to different extents nitrate. However, to date, there is little understanding of the mechanisms involved in the regulation of perchlorate reduction by oxygen and nitrate. As a continuation of our studies into the factors that control DPRB activity we investigated these regulatory mechanisms in more detail as a model organism, Dechloromonas aromatica strain RCB, transitions from aerobic metabolism through nitrate reduction to perchlorate reduction. In series of growth transition studies where both nitrate and perchlorate were present, preference for nitrate to perchlorate was observed regardless of the nitrate to perchlorate ratio. Even when the organism was pre-grown anaerobically in perchlorate, nitrate was reduced prior to perchlorate. Using non-growth washed cell suspension, perchlorate- grown D. aromatica was capable of reducing both perchlorate and nitrate concomitantly suggesting the preferentially utilization of nitrate was not a result of enzyme functionality. To elucidate the mechanism for preferential utilization of

  9. Stochastic Euler-Poincaré reduction

    NASA Astrophysics Data System (ADS)

    Arnaudon, Marc; Chen, Xin; Cruzeiro, Ana Bela

    2014-08-01

    We prove a Euler-Poincaré reduction theorem for stochastic processes taking values on a Lie group, which is a generalization of the reduction argument for the deterministic case [J. E. Marsden and T. S. Ratiu, Introduction to Mechanics and Symmetry: A Basic Exposition of Classical Mechanical Systems, Texts in Applied Mathematics (Springer, 2003)]. We also show examples of its application to SO(3) and to the group of diffeomorphisms, which includes the Navier-Stokes equation on a bounded domain and the Camassa-Holm equation.

  10. Distal Humerus Fractures: Open Reduction Internal Fixation.

    PubMed

    Mighell, Mark A; Stephens, Brent; Stone, Geoffrey P; Cottrell, Benjamin J

    2015-11-01

    Distal humerus fractures are challenging injuries for the upper extremity surgeon. However, recent techniques in open reduction internal fixation have been powerful tools in getting positive outcomes. To get such results, the surgeon must be aware of how to properly use these techniques in their respective practices. The method of fixation depends on the fracture, taking the degree of comminution and the restoration of the columns and articular surface into account. This article helps surgeons understand the concepts behind open reduction internal fixation of the distal humerus and makes them aware of pitfalls that may lead to negative results. PMID:26498548

  11. Stochastic Euler-Poincaré reduction

    SciTech Connect

    Arnaudon, Marc; Chen, Xin; Cruzeiro, Ana Bela

    2014-08-15

    We prove a Euler-Poincaré reduction theorem for stochastic processes taking values on a Lie group, which is a generalization of the reduction argument for the deterministic case [J. E. Marsden and T. S. Ratiu, Introduction to Mechanics and Symmetry: A Basic Exposition of Classical Mechanical Systems, Texts in Applied Mathematics (Springer, 2003)]. We also show examples of its application to SO(3) and to the group of diffeomorphisms, which includes the Navier-Stokes equation on a bounded domain and the Camassa-Holm equation.

  12. Poverty Reduction in Zambia: A Conceptual Analysis of the Zambian Poverty Reduction Strategy Paper

    ERIC Educational Resources Information Center

    Imboela, Bruce Lubinda

    2005-01-01

    Poverty reduction strategy papers (PRSPs) present a recipient country's program of intent for the utilization of World Bank loans and grants to alleviate debt under the bank's programs of action for poverty reduction in highly indebted poor countries (HIPCs). This article argues that structural transformation is a prerequisite for poverty…

  13. 20 CFR 410.540 - Reductions; more than one reduction event.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Reductions; more than one reduction event. 410.540 Section 410.540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL COAL MINE HEALTH AND SAFETY ACT OF 1969, TITLE IV-BLACK LUNG BENEFITS (1969- ) Payment of Benefits § 410.540...

  14. Reduction in CS: A (Mostly) Quantitative Analysis of Reductive Solutions to Algorithmic Problems

    ERIC Educational Resources Information Center

    Armoni, Michal

    2009-01-01

    Reduction is a problem-solving strategy, relevant to various areas of computer science, and strongly connected to abstraction: a reductive solution necessitates establishing a connection among problems that may seem totally disconnected at first sight, and abstracts the solution to the reduced-to problem by encapsulating it as a black box. The…

  15. 48 CFR 1552.237-75 - Paperwork Reduction Act.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... the collection of identical information from ten (10) or more public respondents. Paperwork Reduction... collect identical information from ten (10) or more public respondents, the Paperwork Reduction Act...

  16. 48 CFR 1552.237-75 - Paperwork Reduction Act.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... the collection of identical information from ten (10) or more public respondents. Paperwork Reduction... collect identical information from ten (10) or more public respondents, the Paperwork Reduction Act...

  17. 48 CFR 1552.237-75 - Paperwork Reduction Act.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... the collection of identical information from ten (10) or more public respondents. Paperwork Reduction... collect identical information from ten (10) or more public respondents, the Paperwork Reduction Act...

  18. Spectral Data Reduction via Wavelet Decomposition

    NASA Technical Reports Server (NTRS)

    Kaewpijit, S.; LeMoigne, J.; El-Ghazawi, T.; Rood, Richard (Technical Monitor)

    2002-01-01

    The greatest advantage gained from hyperspectral imagery is that narrow spectral features can be used to give more information about materials than was previously possible with broad-band multispectral imagery. For many applications, the new larger data volumes from such hyperspectral sensors, however, present a challenge for traditional processing techniques. For example, the actual identification of each ground surface pixel by its corresponding reflecting spectral signature is still one of the most difficult challenges in the exploitation of this advanced technology, because of the immense volume of data collected. Therefore, conventional classification methods require a preprocessing step of dimension reduction to conquer the so-called "curse of dimensionality." Spectral data reduction using wavelet decomposition could be useful, as it does not only reduce the data volume, but also preserves the distinctions between spectral signatures. This characteristic is related to the intrinsic property of wavelet transforms that preserves high- and low-frequency features during the signal decomposition, therefore preserving peaks and valleys found in typical spectra. When comparing to the most widespread dimension reduction technique, the Principal Component Analysis (PCA), and looking at the same level of compression rate, we show that Wavelet Reduction yields better classification accuracy, for hyperspectral data processed with a conventional supervised classification such as a maximum likelihood method.

  19. Intraocular pressure reduction and regulation system

    NASA Technical Reports Server (NTRS)

    Baehr, E. F.; Burnett, J. E.; Felder, S. F.; Mcgannon, W. J.

    1979-01-01

    An intraocular pressure reduction and regulation system is described and data are presented covering performance in: (1) reducing intraocular pressure to a preselected value, (2) maintaining a set minimum intraocular pressure, and (3) reducing the dynamic increases in intraocular pressure resulting from external loads applied to the eye.

  20. Education and Poverty Reduction in Tanzania

    ERIC Educational Resources Information Center

    Wedgwood, Ruth

    2007-01-01

    This paper reviews research on the returns to education in Tanzania, both financial and non-financial, and considers whether these returns translate into poverty reduction. It looks at reasons why achievement of high primary enrolment rates in the past did not lead to the realisation of the associated developmental outcomes, considering factors…

  1. Drift reduction with drift control adjuvants

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Numerous drift reduction adjuvants and spray deposition aids are available to applicators of crop production and protection chemicals. Performance of many of the newly introduced drift control adjuvants has not been well documented for aerial application. Five new drift control adjuvants were sele...

  2. 76 FR 40320 - Risk Reduction Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-08

    ... requested public comment on a potential risk reduction rulemaking. See 75 FR 76345-76351, Dec. 8, 2010. A... plans to mitigate that risk. Each RRP is statutorily required to be supported by a risk analysis and a.... See 49 CFR 1.49(oo); 74 FR 26981 (June 5, 2009); see also 49 U.S.C. 103(g). Each railroad subject...

  3. Reduction in Force in Rural Eastern Kentucky.

    ERIC Educational Resources Information Center

    Prickett, R. L.; And Others

    This paper examines factors related to the reduction of certified school personnel in Eastern Kentucky rural school districts. The economy of Eastern Kentucky has relied heavily on the coal industry, which during the past several years has suffered losses resulting in job layoffs and closure of companies. Economic distress caused a declining…

  4. Abel's Theorem Simplifies Reduction of Order

    ERIC Educational Resources Information Center

    Green, William R.

    2011-01-01

    We give an alternative to the standard method of reduction or order, in which one uses one solution of a homogeneous, linear, second order differential equation to find a second, linearly independent solution. Our method, based on Abel's Theorem, is shorter, less complex and extends to higher order equations.

  5. Acoustically swept rotor. [helicopter noise reduction

    NASA Technical Reports Server (NTRS)

    Schmitz, F. H.; Boxwell, D. A.; Vause, R. (Inventor)

    1979-01-01

    Impulsive noise reduction is provided in a rotor blade by acoustically sweeping the chord line from root to tip so that the acoustic radiation resulting from the summation of potential singularities used to model the flow about the blade tend to cancel for all times at an observation point in the acoustic far field.

  6. UHB engine fan broadband noise reduction study

    NASA Astrophysics Data System (ADS)

    Gliebe, Philip R.; Ho, Patrick Y.; Mani, Ramani

    1995-06-01

    A study has been completed to quantify the contribution of fan broadband noise to advanced high bypass turbofan engine system noise levels. The result suggests that reducing fan broadband noise can produce 3 to 4 EPNdB in engine system noise reduction, once the fan tones are eliminated. Further, in conjunction with the elimination of fan tones and an increase in bypass ratio, a potential reduction of 7 to 10 EPNdB in system noise can be achieved. In addition, an initial assessment of engine broadband noise source mechanisms has been made, concluding that the dominant source of fan broadband noise is the interaction of incident inlet boundary layer turbulence with the fan rotor. This source has two contributors, i.e., unsteady life dipole response and steady loading quadrupole response. The quadrupole contribution was found to be the most important component, suggesting that broadband noise reduction can be achieved by the reduction of steady loading field-turbulence field quadrupole interaction. Finally, for a controlled experimental quantification and verification, the study recommends that further broadband noise tests be done on a simulated engine rig, such as the GE Aircraft Engine Universal Propulsion Simulator, rather than testing on an engine statically in an outdoor arena The rig should be capable of generating forward and aft propagating fan noise, and it needs to be tested in a large freejet or a wind tunnel.

  7. Are Reductions in Population Sodium Intake Achievable?

    PubMed Central

    Levings, Jessica L.; Cogswell, Mary E.; Gunn, Janelle Peralez

    2014-01-01

    The vast majority of Americans consume too much sodium, primarily from packaged and restaurant foods. The evidence linking sodium intake with direct health outcomes indicates a positive relationship between higher levels of sodium intake and cardiovascular disease risk, consistent with the relationship between sodium intake and blood pressure. Despite communication and educational efforts focused on lowering sodium intake over the last three decades data suggest average US sodium intake has remained remarkably elevated, leading some to argue that current sodium guidelines are unattainable. The IOM in 2010 recommended gradual reductions in the sodium content of packaged and restaurant foods as a primary strategy to reduce US sodium intake, and research since that time suggests gradual, downward shifts in mean population sodium intake are achievable and can move the population toward current sodium intake guidelines. The current paper reviews recent evidence indicating: (1) significant reductions in mean population sodium intake can be achieved with gradual sodium reduction in the food supply, (2) gradual sodium reduction in certain cases can be achieved without a noticeable change in taste or consumption of specific products, and (3) lowering mean population sodium intake can move us toward meeting the current individual guidelines for sodium intake. PMID:25325254

  8. Industrial Waste Reduction Program. Program plan

    SciTech Connect

    Not Available

    1991-10-24

    US industry generates over 12 billion tons of wastes each year. These wastes consist of undesirable by-products of industrial production that are discarded into our environment. Energy is an integral part of these wastes; it is found in the embodied energy of industrial feedstocks not optimally used, in the energy content of the wastes themselves, and in the energy needed to transport, treat, and dispose of wastes. Estimates of the potential energy savings from reducing industrial wastes range from three to four quadrillion Btu per year -- enough to meet the annual energy needs of 30 million American homes. This document presents a plan for the Industrial Waste Reduction Program, which has been designed to help achieve national goals for energy efficiency and waste minimization. The objective of the program is to improve the energy efficiency of industrial processes through cost-effective waste reduction. The initial program focus is on waste reduction opportunities in the production and use of chemicals, due to the significant amount of energy used in these activities and the large amounts of hazardous and toxic wastes they generate. The chemical industry will be the initial subject of a series of waste reduction opportunity assessments conducted as part of the program. Assessments of other industries and waste problems will follow.

  9. On dimension reduction in Gaussian filters

    NASA Astrophysics Data System (ADS)

    Solonen, Antti; Cui, Tiangang; Hakkarainen, Janne; Marzouk, Youssef

    2016-04-01

    A priori dimension reduction is a widely adopted technique for reducing the computational complexity of stationary inverse problems. In this setting, the solution of an inverse problem is parameterized by a low-dimensional basis that is often obtained from the truncated Karhunen-Loève expansion of the prior distribution. For high-dimensional inverse problems equipped with smoothing priors, this technique can lead to drastic reductions in parameter dimension and significant computational savings. In this paper, we extend the concept of a priori dimension reduction to non-stationary inverse problems, in which the goal is to sequentially infer the state of a dynamical system. Our approach proceeds in an offline-online fashion. We first identify a low-dimensional subspace in the state space before solving the inverse problem (the offline phase), using either the method of ‘snapshots’ or regularized covariance estimation. Then this subspace is used to reduce the computational complexity of various filtering algorithms—including the Kalman filter, extended Kalman filter, and ensemble Kalman filter—within a novel subspace-constrained Bayesian prediction-and-update procedure (the online phase). We demonstrate the performance of our new dimension reduction approach on various numerical examples. In some test cases, our approach reduces the dimensionality of the original problem by orders of magnitude and yields up to two orders of magnitude in computational savings.

  10. 14 CFR 398.11 - Funding reductions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Funding reductions. 398.11 Section 398.11 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS GUIDELINES FOR INDIVIDUAL DETERMINATIONS OF BASIC ESSENTIAL AIR SERVICE § 398.11...

  11. 14 CFR 398.11 - Funding reductions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Funding reductions. 398.11 Section 398.11 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS GUIDELINES FOR INDIVIDUAL DETERMINATIONS OF BASIC ESSENTIAL AIR SERVICE § 398.11...

  12. 14 CFR 398.11 - Funding reductions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Funding reductions. 398.11 Section 398.11 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS GUIDELINES FOR INDIVIDUAL DETERMINATIONS OF BASIC ESSENTIAL AIR SERVICE § 398.11...

  13. 14 CFR 398.11 - Funding reductions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Funding reductions. 398.11 Section 398.11 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS GUIDELINES FOR INDIVIDUAL DETERMINATIONS OF BASIC ESSENTIAL AIR SERVICE § 398.11...

  14. 14 CFR 398.11 - Funding reductions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Funding reductions. 398.11 Section 398.11 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS GUIDELINES FOR INDIVIDUAL DETERMINATIONS OF BASIC ESSENTIAL AIR SERVICE § 398.11...

  15. From Lessons Learned Towards Disaster Reduction Measures

    NASA Astrophysics Data System (ADS)

    Scheer, S.

    2009-04-01

    Efforts have been undertaken over the past years in eliciting and collecting lessons as they could be derived from the outcome of natural disasters management. Lessons are viewed from various perspectives according to • the situation or triggering event which led to the disaster • the local or time-dependent characteristics of this situation and further analysed according to • their benefits • necessary actions to do in order to better implement a lesson. The explicit elicitation of all that information fosters the generation of good practices and the identification of bad practices. Hence the creation of appropriate measures concerning disaster reduction issues could be positively influenced. On the other hand, continuous efforts are undertaken in the field of establishing lists of disaster reduction measures for all major hazards. Those measures comprise both concrete techniques (e.g. a tool or a structure) and advisory techniques (teaching practices or procedural instructions). This paper gives an overview of ways to "produce" disaster reduction measures from lessons learned; moreover it will explain how context-dependent analysis of lessons can potentially lead to alterations of existing disaster reduction measures.

  16. Reduction in Force: Is Your Board Prepared?

    ERIC Educational Resources Information Center

    Haun, Francis R.

    To help ameliorate the adverse effects of reduction in force (RIF), school districts facing declining enrollments should develop and adopt RIF policies before they are needed. School district officials should compile up-to-date enrollment projections and anticipated staff needs. The board of education should take care to inform the public and to…

  17. Reduction in Force: Is Your Board Prepared?

    ERIC Educational Resources Information Center

    Stanley, William L., Jr.

    A reduction in force (RIF), coupled with today's inflation and cost of living increases, impacts on school systems. This paper discusses the effects on an urban school system--the Atlanta Public Schools--and offers suggestions to school administrators on moves to make and pitfalls to avoid when faced with RIF. Some topics covered include legal…

  18. Reduction in Force: A Legal Update.

    ERIC Educational Resources Information Center

    Beckham, Joseph C.

    Courts have been reluctant to interfere with the decision-making authority of local school boards. However, a reduction-in-force (RIF) decision can be legally challenged by a discharged employee with evidence that the school board has either: (1) acted arbitrarily or capriciously, (2) failed to comply with procedural mandates, or (3) utilized…

  19. Robotic system for glovebox size reduction

    SciTech Connect

    KWOK,KWAN S.; MCDONALD,MICHAEL J.

    2000-03-02

    The Intelligent Systems and Robotics Center (ISRC) at Sandia National Laboratories (SNL) is developing technologies for glovebox size reduction in the DOE nuclear complex. A study was performed for Kaiser-Hill (KH) at the Rocky Flats Environmental Technology Site (RFETS) on the available technologies for size reducing the glovebox lines that require size reduction in place. Currently, the baseline approach to these glovebox lines is manual operations using conventional mechanical cutting methods. The study has been completed and resulted in a concept of the robotic system for in-situ size reduction. The concept makes use of commercially available robots that are used in the automotive industry. The commercially available industrial robots provide high reliability and availability that are required for environmental remediation in the DOE complex. Additionally, the costs of commercial robots are about one-fourth that of the custom made robots for environmental remediation. The reason for the lower costs and the higher reliability is that there are thousands of commercial robots made annually, whereas there are only a few custom robots made for environmental remediation every year. This paper will describe the engineering analysis approach used in the design of the robotic system for glovebox size reduction.

  20. ORAC-DR: Astronomy data reduction pipeline

    NASA Astrophysics Data System (ADS)

    Jenness, Tim; Economou, Frossie; Cavanagh, Brad; Currie, Malcolm J.; Gibb, Andy

    2013-10-01

    ORAC-DR is a generic data reduction pipeline infrastructure; it includes specific data processing recipes for a number of instruments. It is used at the James Clerk Maxwell Telescope, United Kingdom Infrared Telescope, AAT, and LCOGT. This pipeline runs at the JCMT Science Archive hosted by CADC to generate near-publication quality data products; the code has been in use since 1998.

  1. Adolescents' Perceptions of Smoking and Stress Reduction

    ERIC Educational Resources Information Center

    Scales, Monica B.; Monahan, Jennifer L.; Rhodes, Nancy; Roskos-Ewoldsen, David; Johnson-Turbes, Ashani

    2009-01-01

    The present study examined how adolescents perceive the relationship between smoking and stress and where they learn that smoking cigarettes may be an effective stress-reduction mechanism. Eight focus groups were conducted with low-income African American and European American 14- to 16-year-olds in urban and rural locations, in which they…

  2. Variance Reduction for a Discrete Velocity Gas

    NASA Astrophysics Data System (ADS)

    Morris, A. B.; Varghese, P. L.; Goldstein, D. B.

    2011-05-01

    We extend a variance reduction technique developed by Baker and Hadjiconstantinou [1] to a discrete velocity gas. In our previous work, the collision integral was evaluated by importance sampling of collision partners [2]. Significant computational effort may be wasted by evaluating the collision integral in regions where the flow is in equilibrium. In the current approach, substantial computational savings are obtained by only solving for the deviations from equilibrium. In the near continuum regime, the deviations from equilibrium are small and low noise evaluation of the collision integral can be achieved with very coarse statistical sampling. Spatially homogenous relaxation of the Bobylev-Krook-Wu distribution [3,4], was used as a test case to verify that the method predicts the correct evolution of a highly non-equilibrium distribution to equilibrium. When variance reduction is not used, the noise causes the entropy to undershoot, but the method with variance reduction matches the analytic curve for the same number of collisions. We then extend the work to travelling shock waves and compare the accuracy and computational savings of the variance reduction method to DSMC over Mach numbers ranging from 1.2 to 10.

  3. DIRECT REDUCTION: A REVIEW OF COMMERCIAL PROCESSES

    EPA Science Inventory

    The report gives results of a review of direct reduction commercial processes for ironmaking. The potential for environmental degradation appears to be minimal. A detailed environmental assessment does not appear to be warranted. It is recommended that samples of scrubber water a...

  4. Researcher Perspectives on Class Size Reduction

    ERIC Educational Resources Information Center

    Graue, Elizabeth; Rauscher, Erica

    2009-01-01

    This article applies to class size research Grant and Graue's (1999) position that reviews of research represent conversations in the academic community. By extending our understanding of the class size reduction conversation beyond published literature to the perspectives of researchers who have studied the topic, we create a review that includes…

  5. Multiple Procedure Payment Reduction: Health Policy Update.

    PubMed

    Rehani, B; Hirsch, J A; Dillon, W P; González, R G; Lev, M H; Schaefer, P W

    2015-11-01

    Multiple Procedure Payment Reduction currently applies to multiple diagnostic imaging services administered to the same patient during the same day and entails a 50% decrease in the technical component and a 25% decrease in the professional component reimbursement. This might change with time due to further legislation, so it is important to be up-to-date on these health policy developments. PMID:26381559

  6. Drift reduction with drift control adjuvants

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Numerous drift reduction adjuvants and spray deposition aids are available to applicators of crop production and protection chemicals. Performance of many of the newly introduced drift control adjuvants has not been well documented for aerial application. Four new drift control adjuvants were sele...

  7. Hybrid mesh generation using advancing reduction technique

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study presents an extension of the application of the advancing reduction technique to the hybrid mesh generation. The proposed algorithm is based on a pre-generated rectangle mesh (RM) with a certain orientation. The intersection points between the two sets of perpendicular mesh lines in RM an...

  8. Cyclone reduction of taconite. Final report

    SciTech Connect

    Taylor, P.R.; Bartlett, R.W.; Abdel-latif, M.A.; Hou, X.; Kumar, P.

    1995-05-01

    A cyclone reactor system for the partial reduction and melting of taconite concentrate fines has been engineered, designed and operated. A non-transferred arc plasma torch was employed as a heat source. Taconite fines, carbon monoxide, and carbon dioxide were fed axially into the reactor, while the plasma gas was introduced tangentially into the cyclone. The average reactor temperature was maintained at above 1400{degrees}C, and reduction experiments were performed under various conditions. The influence of the following parameters on the reduction of taconite was investigated experimentally; carbon monoxide to carbon dioxide inlet feed ratio, carbon monoxide inlet partial pressure, and average reactor temperature. The interactions of the graphite lining with carbon dioxide and taconite were also studied. An attempt was made to characterize the flow behavior of the molten product within the cyclone. The results suggest that the system may approach a plug flow reactor, with little back mixing. Finally, a fundamental mathematical model was developed. The model describes the flow dynamics of gases and solid particles in a cyclone reactor, energy exchange, mass transfer, and the chemical kinetics associated with cyclone smelting of taconite concentrate fines. The influence of the various parameters on the reduction and melting of taconite particles was evaluated theoretically.

  9. Waste Reduction Guide for Indiana Schools.

    ERIC Educational Resources Information Center

    Indiana State Dept. of Education, Indianapolis. Center for School Improvement and Performance.

    This guide describes a waste reduction program for Indiana schools, kindergarten through 12th grade. It is designed to be used by any school administrator, teacher, staff person, student and/or parent willing to provide leadership, generate enthusiasm, and publicize the program. By combining traditional lessons with the actual practice of waste…

  10. Waste reduction through consumer education. Final report

    SciTech Connect

    Harrison, E.Z.

    1996-05-01

    The Waste Reduction through Consumer Education research project was conducted to determine how environmental educational strategies influence purchasing behavior in the supermarket. The objectives were to develop, demonstrate, and evaluate consumer education strategies for waste reduction. The amount of waste generated by packaging size and form, with an adjustment for local recyclability of waste, was determined for 14 product categories identified as having more waste generating and less waste generating product choices (a total of 484 products). Using supermarket scan data and shopper identification numbers, the research tracked the purchases of shoppers in groups receiving different education treatments for 9 months. Statistical tests applied to the purchase data assessed patterns of change between the groups by treatment period. Analysis of the data revealed few meaningful statistical differences between study groups or changes in behavior over time. Findings suggest that broad brush consumer education about waste reduction is not effective in changing purchasing behaviors in the short term. However, it may help create a general awareness of the issues surrounding excess packaging and consumer responsibility. The study concludes that the answer to waste reduction in the future may be a combination of voluntary initiatives by manufacturers and retailers, governmental intervention, and better-informed consumers.

  11. Cost Reduction Incentive Awards. 1981 Winners.

    ERIC Educational Resources Information Center

    National Association of College and University Business Officers, Washington, DC.

    Brief descriptions of 47 college programs recognized for awards in the National Association of College and University Officers/U. S. Steel Foundation Cost Reduction Incentive Awards Program are given. They include awards for: shower stall repair; chemical waste exchange; vibrating alarms for hearing-imparied; self-funding insurance consortium;…

  12. Oxidation and Reduction Reactions in Organic Chemistry

    ERIC Educational Resources Information Center

    Shibley, Ivan A., Jr.; Amaral, Katie E.; Aurentz, David J.; McCaully, Ronald J.

    2010-01-01

    A variety of approaches to the concept of oxidation and reduction appear in organic textbooks. The method proposed here is different than most published approaches. The oxidation state is calculated by totaling the number of heterogeneous atoms, [pi]-bonds, and rings. A comparison of the oxidation states of reactant and product determine what type…

  13. Consonant Cluster Reduction in Tejano English.

    ERIC Educational Resources Information Center

    Bayley, Robert

    1994-01-01

    Examines the process of consonant cluster reduction in the English of residents of a San Antonio, Texas, "barrio." The author compares Tejano patterns of "/-t,d/" deletion with the pan-English pattern. Results suggest a pattern of convergence and divergence. The study shows that Mexican American English exhibits regional and generational…

  14. 24 CFR 35.1120 - Hazard reduction.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Public Housing Programs § 35.1120 Hazard reduction. (a) Each PHA shall, in accordance with § 35.1325, abate all lead-based paint and lead-based paint hazards identified in the evaluations conducted pursuant to § 35.1115....

  15. 24 CFR 35.1120 - Hazard reduction.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Public Housing Programs § 35.1120 Hazard reduction. (a) Each PHA shall, in accordance with § 35.1325, abate all lead-based paint and lead-based paint hazards identified in the evaluations conducted pursuant to § 35.1115....

  16. 24 CFR 35.1120 - Hazard reduction.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Public Housing Programs § 35.1120 Hazard reduction. (a) Each PHA shall, in accordance with § 35.1325, abate all lead-based paint and lead-based paint hazards identified in the evaluations conducted pursuant to § 35.1115....

  17. 24 CFR 35.1120 - Hazard reduction.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Public Housing Programs § 35.1120 Hazard reduction. (a) Each PHA shall, in accordance with § 35.1325, abate all lead-based paint and lead-based paint hazards identified in the evaluations conducted pursuant to § 35.1115....

  18. Bosch CO2 Reduction System Development

    NASA Technical Reports Server (NTRS)

    Holmes, R. F.; King, C. D.; Keller, E. E.

    1976-01-01

    Development of a Bosch process CO2 reduction unit was continued, and, by means of hardware modifications, the performance was substantially improved. Benefits of the hardware upgrading were demonstrated by extensive unit operation and data acquisition in the laboratory. This work was accomplished on a cold seal configuration of the Bosch unit.

  19. Influence of sediment reduction on TCE degradation

    SciTech Connect

    Szecsody, James E.; Williams, Mark D.; Fruchter, Jonathan S.; Vermeul, Vincent R.; Evans, J. C.; Sklarew, Deborah S.

    2000-12-01

    A field-scale remediation technique for TCE and chromate is currently being implemented which uses a chemical treatment to reduce existing iron(III) in sediments. While reduction of some contaminants is well established, TCE data show that dechlorination is more complex, and the role of iron oxides to catalyze the reaction is not well understood. The purpose of this laboratory-scale study was to investigate the influence of temperature and partial sediment reduction on TCE dechlorination. Fully reduced sediments can degrade TCE at sufficiently fast rates (1.2 to 19 h) during static and transport experiments over 2oC to 25oC that a successful barrier could be made at the field scale. In contrast, partially reduced sediment resulted in up to a 3 order of magnitude decrease in the TCE dechlorination rate. While minimally reduced sediment had nearly no TCE reactivity, > 40% reduced sediment had considerably faster dechlorination rates. The second-order dependence of the TCE dechlorination rate on the fraction of reduced iron demonstrates the significant role of the iron oxide surface (as a catalyst or for surface coordination) for TCE dechlorination. Based on these results, the field-scale reduction was designed with specific reagent concen-trations, temperature, and flow rates to efficiently create a reductive barrier.

  20. System Complexity Reduction via Feature Selection

    ERIC Educational Resources Information Center

    Deng, Houtao

    2011-01-01

    This dissertation transforms a set of system complexity reduction problems to feature selection problems. Three systems are considered: classification based on association rules, network structure learning, and time series classification. Furthermore, two variable importance measures are proposed to reduce the feature selection bias in tree…

  1. Tensor integrand reduction via Laurent expansion

    NASA Astrophysics Data System (ADS)

    Hirschi, Valentin; Peraro, Tiziano

    2016-06-01

    We introduce a new method for the application of one-loop integrand reduction via the Laurent expansion algorithm, as implemented in the public C ++ library N inja. We show how the coefficients of the Laurent expansion can be computed by suitable contractions of the loop numerator tensor with cut-dependent projectors, making it possible to interface N inja to any one-loop matrix element generator that can provide the components of this tensor. We implemented this technique in the N inja library and interfaced it to M adL oop, which is part of the public M adG raph5_ aMC@NLO framework. We performed a detailed performance study, comparing against other public reduction tools, namely C utT ools, S amurai, IREGI, PJF ry++ and G olem95. We find that N inja out-performs traditional integrand reduction in both speed and numerical stability, the latter being on par with that of the tensor integral reduction tool Golem95 which is however more limited and slower than N inja. We considered many benchmark multi-scale processes of increasing complexity, involving QCD and electro-weak corrections as well as effective non-renormalizable couplings, showing that N inja's performance scales well with both the rank and multiplicity of the considered process.

  2. Airport noise impact reduction through operations

    NASA Technical Reports Server (NTRS)

    Deloach, R.

    1981-01-01

    The effects of various aeronautical, operational, and land-use noise impact reduction alternatives are assessed for a major midwestern airport. Specifically, the relative effectiveness of adding sound absorbing material to aircraft engines, imposing curfews, and treating houses with acoustic insulation are examined.

  3. Selecting the best defect reduction methodology

    SciTech Connect

    Hinckley, C.M.; Barkan, P.

    1994-04-01

    Defect rates less than 10 parts per million, unimaginable a few years ago, have become the standard of world-class quality. To reduce defects, companies are aggressively implementing various quality methodologies, such as Statistical Quality Control Motorola`s Six Sigma, or Shingo`s poka-yok. Although each quality methodology reduces defects, selection has been based on an intuitive sense without understanding their relative effectiveness in each application. A missing link in developing superior defect reduction strategies has been a lack of a general defect model that clarifies the unique focus of each method. Toward the goal of efficient defect reduction, we have developed an event tree which addresses a broad spectrum of quality factors and two defect sources, namely, error and variation. The Quality Control Tree (QCT) predictions are more consistent with production experience than obtained by the other methodologies considered independently. The QCT demonstrates that world-class defect rates cannot be achieved through focusing on a single defect source or quality control factor, a common weakness of many methodologies. We have shown that the most efficient defect reduction strategy depend on the relative strengths and weaknesses of each organization. The QCT can help each organization identify the most promising defect reduction opportunities for achieving its goals.

  4. Group Anxiety Reduction with Sixth Grade Students

    ERIC Educational Resources Information Center

    Miller, Nichole; DeLapp, Renee; Driscoll, Richard

    2007-01-01

    Given the high incidence of test-anxiety impairment and the need to treat more students, the study was undertaken to assess a group-administered intervention requiring a minimum of staff hours. An "active control" training was used which has been shown to provide strong anxiety reduction and respectable test score gains in prior studies. The…

  5. Towards a targetted emission reduction in Europe

    NASA Astrophysics Data System (ADS)

    Hordijk, Leen

    Currently 20 European countries have stated that they will reduce their SO 2-emissions by at least 30% in the years 1993-1995 based on 1980 emissions. Some countries will reduce more, e.g. France by 50 %. Although politically this is an important step, a more or less flat rate of emission reduction throughout Europe is not an efficient solution. The paper describes an alternate emission reduction targetted to those areas where depositions are high and taking into account the source-receptor relationships in Europe. The reductions are calculated by using the model RAINS which is being developed at IIASA. RAINS is a set of linked submodels dealing with energy scenarios, SO 2 emissions, abatement options, long-range transport, deposition, forest soil acidification and lake acidification. For the purpose of this paper an optimization algorithm developed by R. Shaw and J. Young (AES, Canada) has been connected with RAINS. The results show optimal reduction patterns in Europe for a number of different receptor areas and alternative energy scenarios.

  6. Cryogenic Boil-Off Reduction System Testing

    NASA Technical Reports Server (NTRS)

    Plachta, David W.; Johnson, Wesley L.; Feller, Jeffery

    2014-01-01

    The Cryogenic Boil-Off Reduction System was tested with LH2 and LOX in a vacuum chamber to simulate space vacuum and the temperatures of low Earth orbit. Testing was successful and results validated the scaling study model that predicts active cooling reduces upper stage cryogenic propulsion mass for loiter periods greater than 2 weeks.

  7. Rethinking Recycling: An Oregon Waste Reduction Curriculum.

    ERIC Educational Resources Information Center

    Oregon State Dept. of Environmental Quality, Portland.

    This updated curriculum guide is designed to provide teachers of elementary school science with a set of activities on recycling and waste reduction. The curriculum has three sections: (1) Grades K-3 Lessons; (2) Grades 4-5 Lessons; and (3) Teacher's Resource Guide. It is designed to take students from an introduction to natural resources and…

  8. The GALAH survey: The data reduction pipeline

    NASA Astrophysics Data System (ADS)

    Kos, Janez; Lin, Jane; Zwitter, Tomaž; Žerjal, Maruška; Sharma, Sanjib; Bland-Hawthorn, Joss; Asplund, Martin; Casey, Andrew R.; De Silva, Gayandhi M.; Freeman, Ken C.; Martell, Sarah L.; Simpson, Jeffrey D.; Schlesinger, Katharine J.; Zucker, Daniel; Anguiano, Borja; Bacigalupo, Carlos; Bedding, Timothy R.; Betters, Christopher; Da Costa, Gary; Duong, Ly; Hyde, Elaina; Ireland, Michael; Kafle, Prajwal R.; Leon-Saval, Sergio; Lewis, Geraint F.; Munari, Ulisse; Nataf, David; Stello, Dennis; Tinney, Chris G.; Traven, Gregor; Watson, Fred; Wittenmyer, Robert A.

    2016-08-01

    We present the data reduction procedures being used by the GALAH survey, carried out with the HERMES fibre-fed, multi-object spectrograph on the 3.9 m Anglo-Australian Telescope. GALAH is a unique survey, targeting 1 million stars brighter than magnitude V=14 at a resolution of 28,000 with a goal to measure the abundances of 29 elements. Such a large number of high resolution spectra necessitates the development of a reduction pipeline optimized for speed, accuracy, and consistency. We outline the design and structure of the Iraf-based reduction pipeline that we developed, specifically for GALAH, to produce fully calibrated spectra aimed for subsequent stellar atmospheric parameter estimation. The pipeline takes advantage of existing Iraf routines and other readily available software so as to be simple to maintain, testable and reliable. A radial velocity and stellar atmospheric parameter estimator code is also presented, which is used for further data analysis and yields a useful verification of the reduction quality. We have used this estimator to quantify the data quality of GALAH for fibre cross-talk level (≲ 0.5%) and scattered light (˜5 counts in a typical 20 minutes exposure), resolution across the field, sky spectrum properties, wavelength solution reliability (better than 1 km s-1 accuracy) and radial velocity precision.

  9. California Community Colleges: Coping with Tax Reductions.

    ERIC Educational Resources Information Center

    Tollefson, Terrence A.

    This paper examines the financial problems of California's community colleges caused by reduced local property tax support. In 1978 California voters enacted Proposition 13, a constitutional amendment that reduced taxes on real estate. The proposition's immediate effect on community college funding was a statewide, fifty-percent reduction in local…

  10. Personal Approaches to Stress Reduction: A Workshop.

    ERIC Educational Resources Information Center

    Remer, Rory

    1984-01-01

    Seven topic areas which may be variously combined to comprise a workshop in personal stress reduction are outlined. They include definitions and types of stress, life style planning, nutrition, exercise, networking/social support system, relaxation and other trophotropic interventions, and communication skills. Suggestions are included for…

  11. Oxygen reduction reaction: A framework for success

    DOE PAGESBeta

    Allendorf, Mark D.

    2016-05-06

    Oxygen reduction at the cathode of fuel cells typically requires a platinum-based material to catalyse the reaction, but lower-cost, more stable catalysts are sought. Here, an intrinsically conductive metal–organic framework based on cheaper elements is shown to be a durable, structurally well-defined catalyst for this reaction.

  12. Logistics Reduction Technologies for Exploration Missions

    NASA Technical Reports Server (NTRS)

    Broyan, James L., Jr.; Ewert, Michael K.; Fink, Patrick W.

    2014-01-01

    Human exploration missions under study are limited by the launch mass capacity of existing and planned launch vehicles. The logistical mass of crew items is typically considered separate from the vehicle structure, habitat outfitting, and life support systems. Although mass is typically the focus of exploration missions, due to its strong impact on launch vehicle and habitable volume for the crew, logistics volume also needs to be considered. NASA's Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) Project is developing six logistics technologies guided by a systems engineering cradle-to-grave approach to enable after-use crew items to augment vehicle systems. Specifically, AES LRR is investigating the direct reduction of clothing mass, the repurposing of logistical packaging, the use of autonomous logistics management technologies, the processing of spent crew items to benefit radiation shielding and water recovery, and the conversion of trash to propulsion gases. Reduction of mass has a corresponding and significant impact to logistical volume. The reduction of logistical volume can reduce the overall pressurized vehicle mass directly, or indirectly benefit the mission by allowing for an increase in habitable volume during the mission. The systematic implementation of these types of technologies will increase launch mass efficiency by enabling items to be used for secondary purposes and improve the habitability of the vehicle as mission durations increase. Early studies have shown that the use of advanced logistics technologies can save approximately 20 m(sup 3) of volume during transit alone for a six-person Mars conjunction class mission.

  13. UHB Engine Fan Broadband Noise Reduction Study

    NASA Technical Reports Server (NTRS)

    Gliebe, Philip R.; Ho, Patrick Y.; Mani, Ramani

    1995-01-01

    A study has been completed to quantify the contribution of fan broadband noise to advanced high bypass turbofan engine system noise levels. The result suggests that reducing fan broadband noise can produce 3 to 4 EPNdB in engine system noise reduction, once the fan tones are eliminated. Further, in conjunction with the elimination of fan tones and an increase in bypass ratio, a potential reduction of 7 to 10 EPNdB in system noise can be achieved. In addition, an initial assessment of engine broadband noise source mechanisms has been made, concluding that the dominant source of fan broadband noise is the interaction of incident inlet boundary layer turbulence with the fan rotor. This source has two contributors, i.e., unsteady life dipole response and steady loading quadrupole response. The quadrupole contribution was found to be the most important component, suggesting that broadband noise reduction can be achieved by the reduction of steady loading field-turbulence field quadrupole interaction. Finally, for a controlled experimental quantification and verification, the study recommends that further broadband noise tests be done on a simulated engine rig, such as the GE Aircraft Engine Universal Propulsion Simulator, rather than testing on an engine statically in an outdoor arena The rig should be capable of generating forward and aft propagating fan noise, and it needs to be tested in a large freejet or a wind tunnel.

  14. Microbial minimalism: genome reduction in bacterial pathogens.

    PubMed

    Moran, Nancy A

    2002-03-01

    When bacterial lineages make the transition from free-living or facultatively parasitic life cycles to permanent associations with hosts, they undergo a major loss of genes and DNA. Complete genome sequences are providing an understanding of how extreme genome reduction affects evolutionary directions and metabolic capabilities of obligate pathogens and symbionts. PMID:11893328

  15. Groupwise Dimension Reduction via Envelope Method

    PubMed Central

    Guo, Zifang; Li, Lexin; Lu, Wenbin; Li, Bing

    2016-01-01

    The family of sufficient dimension reduction (SDR) methods that produce informative combinations of predictors, or indices, are particularly useful for high dimensional regression analysis. In many such analyses, it becomes increasingly common that there is available a priori subject knowledge of the predictors; e.g., they belong to different groups. While many recent SDR proposals have greatly expanded the scope of the methods’ applicability, how to effectively incorporate the prior predictor structure information remains a challenge. In this article, we aim at dimension reduction that recovers full regression information while preserving the predictor group structure. Built upon a new concept of the direct sum envelope, we introduce a systematic way to incorporate the group information in most existing SDR estimators. As a result, the reduction outcomes are much easier to interpret. Moreover, the envelope method provides a principled way to build a variety of prior structures into dimension reduction analysis. Both simulations and real data analysis demonstrate the competent numerical performance of the new method. PMID:26973362

  16. Oxygen reduction reaction: A framework for success

    NASA Astrophysics Data System (ADS)

    Allendorf, Mark D.

    2016-05-01

    Oxygen reduction at the cathode of fuel cells typically requires a platinum-based material to catalyse the reaction, but lower-cost, more stable catalysts are sought. Now, an intrinsically conductive metal–organic framework based on cheaper elements is shown to be a durable, structurally well-defined catalyst for this reaction.

  17. Recent Progress in Engine Noise Reduction Technologies

    NASA Technical Reports Server (NTRS)

    Huff, Dennis; Gliebe, Philip

    2003-01-01

    Highlights from NASA-funded research over the past ten years for aircraft engine noise reduction are presented showing overall technical plans, accomplishments, and selected applications to turbofan engines. The work was sponsored by NASA's Advanced Subsonic Technology (AST) Noise Reduction Program. Emphasis is given to only the engine noise reduction research and significant accomplishments that were investigated at Technology Readiness Levels ranging from 4 to 6. The Engine Noise Reduction sub-element was divided into four work areas: source noise prediction, model scale tests, engine validation, and active noise control. Highlights from each area include technologies for higher bypass ratio turbofans, scarf inlets, forward-swept fans, swept and leaned stators, chevron/tabbed nozzles, advanced noise prediction analyses, and active noise control for fans. Finally, an industry perspective is given from General Electric Aircraft Engines showing how these technologies are being applied to commercial products. This publication contains only presentation vu-graphs from an invited lecture given at the 41st AIAA Aerospace Sciences Meeting, January 6-9, 2003.

  18. Preparation of thorium magnesium-zinc reduction

    NASA Technical Reports Server (NTRS)

    Hariharan, A. V.; Knighton, J. B.; Steunenberg, R. K.

    1969-01-01

    Magnesium-zinc reduction of thorium dioxide is used for the preparation of thorium metal. Potential economic advantages of this technique include use of relatively inexpensive reagents for the metal and flux phases, and production of metal of acceptable quality in good yield.

  19. Child Participation and Disaster Risk Reduction

    ERIC Educational Resources Information Center

    Lopez, Yany; Hayden, Jacqueline; Cologon, Kathy; Hadley, Fay

    2012-01-01

    It has been shown that child participation can have positive results in the rescue, relief and rehabilitation phases of a disaster. Currently child participation is achieving increased attention as a component of disaster risk reduction (DRR). This paper examines the ongoing dialogues on child participation and reviews pertinent literature…

  20. Barrier Reduction Program for Women: Final Report.

    ERIC Educational Resources Information Center

    McWilliams, Katie

    Cedar Valley College's Barrier Reduction Program for Women (BRPW) offers workshops and individual career consultations to help area women meet their personal needs, increase their knowledge of career opportunities, and realize their individual potential. This descriptive and evaluative report begins by examining the diverse characteristics and…

  1. Carbon Dioxide Reduction Technology Trade Study

    NASA Technical Reports Server (NTRS)

    Jeng, Frank F.; Anderson, Molly S.; Abney, Morgan B.

    2011-01-01

    For long-term human missions, a closed-loop atmosphere revitalization system (ARS) is essential to minimize consumables. A carbon dioxide (CO2) reduction technology is used to reclaim oxygen (O2) from metabolic CO2 and is vital to reduce the delivery mass of metabolic O2. A key step in closing the loop for ARS will include a proper CO2 reduction subsystem that is reliable and with low equivalent system mass (ESM). Sabatier and Bosch CO2 reduction are two traditional CO2 reduction subsystems (CRS). Although a Sabatier CRS has been delivered to International Space Station (ISS) and is an important step toward closing the ISS ARS loop, it recovers only 50% of the available O2 in CO2. A Bosch CRS is able to reclaim all O2 in CO2. However, due to continuous carbon deposition on the catalyst surface, the penalties of replacing spent catalysts and reactors and crew time in a Bosch CRS are significant. Recently, technologies have been developed for recovering hydrogen (H2) from Sabatier-product methane (CH4). These include methane pyrolysis using a microwave plasma, catalytic thermal pyrolysis of CH4 and thermal pyrolysis of CH4. Further, development in Sabatier reactor designs based on microchannel and microlith technology could open up opportunities in reducing system mass and enhancing system control. Improvements in Bosch CRS conversion have also been reported. In addition, co-electrolysis of steam and CO2 is a new technology that integrates oxygen generation and CO2 reduction functions in a single system. A co-electrolysis unit followed by either a Sabatier or a carbon formation reactor based on Bosch chemistry could improve the overall competitiveness of an integrated O2 generation and CO2 reduction subsystem. This study evaluates all these CO2 reduction technologies, conducts water mass balances for required external supply of water for 1-, 5- and 10-yr missions, evaluates mass, volume, power, cooling and resupply requirements of various technologies. A system

  2. Skin tension related to tension reduction sutures.

    PubMed

    Hwang, Kun; Kim, Han Joon; Kim, Kyung Yong; Han, Seung Ho; Hwang, Se Jin

    2015-01-01

    The aim of this study was to compare the skin tension of several fascial/subcutaneous tensile reduction sutures. Six upper limbs and 8 lower limbs of 4 fresh cadavers were used. At the deltoid area (10 cm below the palpable acromion) and lateral thigh (midpoint from the palpable greater trochanter to the lateral border of the patella), and within a 3 × 6-cm fusiform area of skin, subcutaneous tissue defects were created. At the midpoint of the defect, a no. 5 silk suture was passed through the dermis at a 5-mm margin of the defect, and the defect was approximated. The initial tension to approximate the margins was measured using a tensiometer.The tension needed to approximate skin without any tension reduction suture (S) was 6.5 ± 4.6 N (Newton). The tensions needed to approximate superficial fascia (SF) and deep fascia (DF) were 7.8 ± 3.4 N and 10.3 ± 5.1 N, respectively. The tension needed to approximate the skin after approximating the SF was 4.1 ± 3.4 N. The tension needed to approximate the skin after approximating the DF was 4.9 ± 4.0 N. The tension reduction effect of approximating the SF was 38.8 ± 16.4% (2.4 ± 1.5 N, P = 0.000 [ANOVA, Scheffé]). The tension reduction effect of approximating the DF was 25.2% ± 21.9% (1.5 ± 1.4 N, P = 0.001 [ANOVA, Scheffé]). The reason for this is thought to be that the SF is located closely to the skin unlike the DF. The results of this study might be a basis for tension reduction sutures. PMID:25569413

  3. Modifications in vertical scar breast reduction.

    PubMed

    Beer, G M; Morgenthaler, W; Spicher, I; Meyer, V E

    2001-06-01

    The use of vertical-scar breast reduction techniques is only slowly increasing, even though they have been advocated by Lassus and Lejour and are requested by patients. Possible reasons why surgeons are reluctant to use these techniques are that they are said to be more difficult to learn, they require considerable experience and intuition, and their applicability is confined to small breasts. Several surgeons have developed modifications, combining vertical-scar breast reduction techniques with details of the familiar inverted-T-scar technique. We present a procedure involving two further modifications of the vertical-scar breast reduction technique: first, a standardised, geometrical preoperative drawing from our superior-pedicle T technique, with the aim of establishing a reproducible method of reduction requiring no particular intuitive touch, and, second, the addition of a periareolar skin resection, to give the breast the desired round shape. Between September 1998 and December 1999 we used this technique in a prospective series of 52 patients. The median resection weight was 450 g. The maximal postoperative follow-up was 15 months. There were no acute postoperative complications necessitating reoperation. The late complication rate was within the expected range for such procedures (seven patients, 13.5%) and included vertical-scar widening, areolar distortion, residual wrinkles due to incomplete shrinkage of the undermined skin in the inferior pole and asymmetry of the breast. This procedure enables us to offer patients with moderate to marked hypertrophy a reproducible versatile vertical breast reduction technique. The technique is easy to teach and easy to learn, especially for those who are familiar with the superior pedicle inverted-T-scar technique. PMID:11355991

  4. Plasma-assisted catalytic storage reduction system

    DOEpatents

    Penetrante, Bernardino M.; Vogtlin, George E.; Merritt, Bernard T.; Brusasco, Raymond M.

    2000-01-01

    A two-stage method for NO.sub.x reduction in an oxygen-rich engine exhaust comprises a plasma oxidative stage and a storage reduction stage. The first stage employs a non-thermal plasma treatment of NO.sub.x gases in an oxygen-rich exhaust and is intended to convert NO to NO.sub.2 in the presence of O.sub.2 and hydrocarbons. The second stage employs a lean NO.sub.x trap to convert such NO.sub.2 to environmentally benign gases that include N.sub.2, CO.sub.2, and H.sub.2 O. By preconverting NO to NO.sub.2 in the first stage with a plasma, the efficiency of the second stage for NO.sub.x reduction is enhanced. For example, an internal combustion engine exhaust is connected by a pipe to a first chamber in which a non-thermal plasma converts NO to NO.sub.2 in the presence of O.sub.2 and hydrocarbons, such as propene. A flow of such hydrocarbons (C.sub.x H.sub.y) is input from usually a second pipe into at least a portion of the first chamber. The NO.sub.2 from the plasma treatment proceeds to a storage reduction catalyst (lean NO.sub.x trap) that converts NO.sub.2 to N.sub.2, CO.sub.2, and H.sub.2 O, and includes a nitrate-forming catalytic site. The hydrocarbons and NO.sub.x are simultaneously reduced while passing through the lean-NO.sub.x trap catalyst. The method allows for enhanced NO.sub.x reduction in vehicular engine exhausts, particularly those having relatively high sulfur contents.

  5. Plasma-assisted catalytic storage reduction system

    DOEpatents

    Penetrante, Bernardino M.; Vogtlin, George E.; Merritt, Bernard T.; Brusasco, Raymond M.

    2002-01-01

    A two-stage method for NO.sub.x reduction in an oxygen-rich engine exhaust comprises a plasma oxidative stage and a storage reduction stage. The first stage employs a non-thermal plasma treatment of NO.sub.x gases in an oxygen-rich exhaust and is intended to convert NO to NO.sub.2 in the presence of O.sub.2 and hydrocarbons. The second stage employs a lean NO.sub.x trap to convert such NO.sub.2 to environmentally benign gases that include N.sub.2, CO.sub.2, and H.sub.2 O. By preconverting NO to NO.sub.2 in the first stage with a plasma, the efficiency of the second stage for NO.sub.x reduction is enhanced. For example, an internal combustion engine exhaust is connected by a pipe to a first chamber in which a non-thermal plasma converts NO to NO.sub.2 in the presence of O.sub.2 and hydrocarbons, such as propene. A flow of such hydrocarbons (C.sub.x H.sub.y) is input from usually a second pipe into at least a portion of the first chamber. The NO.sub.2 from the plasma treatment proceeds to a storage reduction catalyst (lean NO.sub.x trap) that converts NO.sub.2 to N.sub.2, CO.sub.2, and H.sub.2 O, and includes a nitrate-forming catalytic site. The hydrocarbons and NO.sub.x are simultaneously reduced while passing through the lean-NO.sub.x trap catalyst. The method allows for enhanced NO.sub.x reduction in vehicular engine exhausts, particularly those having relatively high sulfur contents.

  6. Reduction of date microbial load with ozone

    PubMed Central

    Farajzadeh, Davood; Qorbanpoor, Ali; Rafati, Hasan; Isfeedvajani, Mohsen Saberi

    2013-01-01

    Background: Date is one of the foodstuffs that are produced in tropical areas and used worldwide. Conventionally, methyl bromide and phosphine are used for date disinfection. The toxic side effects of these usual disinfectants have led food scientists to consider safer agents such as ozone for disinfection, because food safety is a top priority. The present study was performed to investigate the possibility of replacing common conventional disinfectants with ozone for date disinfection and microbial load reduction. Materials and Methods: In this experimental study, date samples were ozonized for 3 and 5 hours with 5 and 10 g/h concentrations and packed. Ozonized samples were divided into two groups and kept in an incubator which was maintained at 25°C and 40°C for 9 months. During this period, every 3 month, microbial load (bacteria, mold, and yeast) were examined in ozonized and non-ozonized samples. Results: This study showed that ozonization with 5 g/h for 3 hours, 5 g/h for 5 hours, 10 g/h for 3 hours, and 10 g/h for 5 hours leads to about 25%, 25%, 53%, and 46% reduction in date mold and yeast load and about 6%, 9%, 76%, and 74.7% reduction in date bacterial load at baseline phase, respectively. Appropriate concentration and duration of ozonization for microbial load reduction were 10 g/h and 3 hours. Conclusion: Date ozonization is an appropriate method for microbial load reduction and leads to an increase in the shelf life of dates. PMID:24124432

  7. The Nature of Reduction in Space Weathering

    NASA Astrophysics Data System (ADS)

    McKay, D. S.; Allen, C. C.

    1993-07-01

    Space weathering is a broad term that includes a number of complex effects of the exposure of materials to the environment of space. The processes that drive space weathering include micrometeorite impact, radiation from the Sun and cosmic rays, and exposure to the vacuum of space. One of the important effects caused by these processes is the tendency for chemical reduction of oxide and silicate materials (including glasses), with accompanying loss of oxygen and production of reduced metal. Such chemical reduction and accompanying metal production may have an important influence on the chemistry of the outermost volume of individual grains as well as on the optical properties of this material. Hapke [1] discussed five processes that have been suggested for producing submicroscopic iron metal in the lunar soil: (1) shock reduction, (2) heating in a thermal blanket in vacuum, (3) shock heating of solar-wind-impregnated grains, (4) coatings deposited by solar wind sputtering, and (5) coatings deposited by impact vaporization. As noted by Hapke, "Processes (1) and (2) have been refuted by laboratory experiments. Processes (4) and (5) have produced submicroscopic iron metal in laboratory simulations. Although no experiments have been done to simulate process (3), it is widely accepted." We have been performing experimental reduction of simulated and actual lunar materials [2-5] and have shown that, under conditions of exposure to hydrogen at elevated temperatures, reduction of FeO readily occurs in ilmenite and lunar composition glass, and occurs at a slower rate in pyroxene and olivine. Even plagioclase feldspar containing minor FeO is readily reduced with formation of metallic iron blebs on surfaces [4]. A comparison of natural lunar samples to hydrogen-reduced samples or simulants in which we are searching for reduction evidence in various soil phases is underway. Preliminary data for mature soils show, in agreement with earlier results, that reduced iron produced in

  8. Size dependent reduction-oxidation-reduction behaviour of cobalt oxide nanocrystals.

    PubMed

    Sadasivan, Sajanikumari; Bellabarba, Ronan M; Tooze, Robert P

    2013-11-21

    Morphologically similar cobalt oxide nanoparticles (Co3O4) of four different sizes (3 nm, 6 nm, 11 nm and 29 nm) with narrow size distribution were prepared by subtle variation of synthesis conditions. These nanoparticles were used as model materials to understand the structural and morphological changes that occur to cobalt oxide during sequential reduction, oxidation and further re-reduction process as a function of the initial size of cobalt oxide. On reduction, spherical cobalt nanoparticles were obtained independent of the original size of cobalt oxide. In contrast, subsequent oxidation of the metal particles led to solid spheres, hollow spheres or core-shell structures depending on the size of the initial metal particle. Further re-reduction of the oxidized structures was also observed to be size dependent. The hollow oxide shells formed by the large particles (29 nm) fragmented into smaller particles on reduction, while the hollow shells of the medium sized particles (11 nm) did not re-disperse on further reduction. Similarly, no re-dispersion was observed in the case of the small particles (6 nm). This model study provides useful insights into the size dependent behavior of metal/metal oxide particles during oxidation/reduction. This has important implications in petrochemical industry where cobalt is used as a catalyst in the Fischer-Tropsch process. PMID:24065040

  9. Diversity of Contaminant Reduction Reactions by Zero-Valent Iron: Role of the Reductate

    SciTech Connect

    Miehr, R; Tratnyek, Paul G.; Bandstra, J; Scherer, Michelle; Alowitz, M; Bylaska, Eric J.

    2004-01-01

    The reactions of 8 model contaminants with 9 types of granular Fe(0) were studied in batch experiments using consistent experimental conditions. The model contaminants (herein referred to as reductates because they were reduced by the iron metal) included cations (Cu2+), anions (CrO42-; NO3-; and 5,5,7,7-indigotetrasulfonate), and neutral species (2-chloroacetophenone; 2,4,6-trinitrotoluene; carbon tetrachloride; and trichloroethene). The diversity of this range of reductates offers a uniquely broad perspective on the reactivity of Fe(0). Rate constants for disappearance of the reductates vary over as much as 4 orders of magnitude for particular reductates (due to differences in the 9 types of iron) but differences among the reductates were even larger, ranging over almost 7 orders of magnitude. Various ways of summarizing the data all suggest that relative reactivities with Fe(0) varies in the order: Cu2, I4S > 2CAP, TNT > CT, Cr6 > TCE > NO3. Although the reductate h as the largest effect on disappearance kinetics, more subtle differences in reactivity due to the type of Fe(0) suggests that removal of Cr6 and NO3 (the inorganic anions) involves adsorption to oxides on the Fe(0), whereas the disappearance kinetics of all other types of reductants is favored by reduction on comparatively oxide-free metal. Correlation analysis of the disappearance rate constants using descriptors of the reductates calculated by molecular modeling (energies of the lowest unoccupied molecular orbitals, LUMO, highest occupied molecular orbitals, HOMO, and HOMO-LUMO gaps) showed that reactivities generally increase with decreasing ELUMO and increasing EGAP (and, therefore, increasing chemical hardness h).

  10. Innovative Flow Control Concepts for Drag Reduction

    NASA Technical Reports Server (NTRS)

    Lin, John C.; Whalen, Edward A.; Eppink, Jenna L.; Siochi, Emilie J.; Alexander, Michael G.; Andino, Marlyn Y.

    2016-01-01

    This paper highlights the technology development of two flow control concepts for aircraft drag reduction. The NASA Environmentally Responsible Aviation (ERA) project worked with Boeing to demonstrate these two concepts on a specially outfitted Boeing 757 ecoDemonstrator during the spring of 2015. The first flow control concept used Active Flow Control (AFC) to delay flow separation on a highly deflected rudder and increase the side force that it generates. This may enable a smaller vertical tail to provide the control authority needed in the event of an engine failure during takeoff and landing, while still operating in a conventional manner over the rest of the flight envelope. Thirty-one sweeping jet AFC actuators were installed and successfully flight-tested on the vertical tail of the 757 ecoDemonstrator. Pilot feedback, flow cone visualization, and analysis of the flight test data confirmed that the AFC is effective, as a smoother flight and enhanced rudder control authority were reported. The second flow control concept is the Insect Accretion Mitigation (IAM) innovation where surfaces were engineered to mitigate insect residue adhesion on a wing's leading edge. This is necessary because something as small as an insect residue on the leading edge of a laminar flow wing design can cause turbulent wedges that interrupt laminar flow, resulting in an increase in drag and fuel use. Several non-stick coatings were developed by NASA and applied to panels that were mounted on the leading edge of the wing of the 757 ecoDemonstrator. The performance of the coated surfaces was measured and validated by the reduction in the number of bug adhesions relative to uncoated control panels flown simultaneously. Both flow control concepts (i.e., sweeping jet actuators and non-stick coatings) for drag reduction were the culmination of several years of development, from wind tunnel tests to flight tests, and produced valuable data for the advancement of modern aircraft designs

  11. Reduction of Subjective and Objective System Complexity

    NASA Technical Reports Server (NTRS)

    Watson, Michael D.

    2015-01-01

    Occam's razor is often used in science to define the minimum criteria to establish a physical or philosophical idea or relationship. Albert Einstein is attributed the saying "everything should be made as simple as possible, but not simpler". These heuristic ideas are based on a belief that there is a minimum state or set of states for a given system or phenomena. In looking at system complexity, these heuristics point us to an idea that complexity can be reduced to a minimum. How then, do we approach a reduction in complexity? Complexity has been described as a subjective concept and an objective measure of a system. Subjective complexity is based on human cognitive comprehension of the functions and inter relationships of a system. Subjective complexity is defined by the ability to fully comprehend the system. Simplifying complexity, in a subjective sense, is thus gaining a deeper understanding of the system. As Apple's Jonathon Ive has stated," It's not just minimalism or the absence of clutter. It involves digging through the depth of complexity. To be truly simple, you have to go really deep". Simplicity is not the absence of complexity but a deeper understanding of complexity. Subjective complexity, based on this human comprehension, cannot then be discerned from the sociological concept of ignorance. The inability to comprehend a system can be either a lack of knowledge, an inability to understand the intricacies of a system, or both. Reduction in this sense is based purely on a cognitive ability to understand the system and no system then may be truly complex. From this view, education and experience seem to be the keys to reduction or eliminating complexity. Objective complexity, is the measure of the systems functions and interrelationships which exist independent of human comprehension. Jonathon Ive's statement does not say that complexity is removed, only that the complexity is understood. From this standpoint, reduction of complexity can be approached

  12. 32 CFR 48.401 - Computation of reduction.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 1 2013-07-01 2013-07-01 false Computation of reduction. 48.401 Section 48.401 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN RETIRED SERVICEMAN'S FAMILY PROTECTION PLAN Reduction of Retired Pay § 48.401 Computation of reduction. (a) The reduction to be made in...

  13. Structural basis of enzymatic benzene ring reduction.

    PubMed

    Weinert, Tobias; Huwiler, Simona G; Kung, Johannes W; Weidenweber, Sina; Hellwig, Petra; Stärk, Hans-Joachim; Biskup, Till; Weber, Stefan; Cotelesage, Julien J H; George, Graham N; Ermler, Ulrich; Boll, Matthias

    2015-08-01

    In chemical synthesis, the widely used Birch reduction of aromatic compounds to cyclic dienes requires alkali metals in ammonia as extremely low-potential electron donors. An analogous reaction is catalyzed by benzoyl-coenzyme A reductases (BCRs) that have a key role in the globally important bacterial degradation of aromatic compounds at anoxic sites. Because of the lack of structural information, the catalytic mechanism of enzymatic benzene ring reduction remained obscure. Here, we present the structural characterization of a dearomatizing BCR containing an unprecedented tungsten cofactor that transfers electrons to the benzene ring in an aprotic cavity. Substrate binding induces proton transfer from the bulk solvent to the active site by expelling a Zn(2+) that is crucial for active site encapsulation. Our results shed light on the structural basis of an electron transfer process at the negative redox potential limit in biology. They open the door for biological or biomimetic alternatives to a basic chemical synthetic tool. PMID:26120796

  14. Optimal design of compact spur gear reductions

    NASA Technical Reports Server (NTRS)

    Savage, M.; Lattime, S. B.; Kimmel, J. A.; Coe, H. H.

    1992-01-01

    The optimal design of compact spur gear reductions includes the selection of bearing and shaft proportions in addition to gear mesh parameters. Designs for single mesh spur gear reductions are based on optimization of system life, system volume, and system weight including gears, support shafts, and the four bearings. The overall optimization allows component properties to interact, yielding the best composite design. A modified feasible directions search algorithm directs the optimization through a continuous design space. Interpolated polynomials expand the discrete bearing properties and proportions into continuous variables for optimization. After finding the continuous optimum, the designer can analyze near optimal designs for comparison and selection. Design examples show the influence of the bearings on the optimal configurations.

  15. High temperature dimensional reduction in Snyder space

    NASA Astrophysics Data System (ADS)

    Nozari, K.; Hosseinzadeh, V.; Gorji, M. A.

    2015-11-01

    In this paper, we formulate the statistical mechanics in Snyder space that supports the existence of a minimal length scale. We obtain the corresponding invariant Liouville volume which properly determines the number of microstates in the semiclassical regime. The results show that the number of accessible microstates drastically reduces at the high energy regime such that there is only one degree of freedom for a particle. Using the Liouville volume, we obtain the deformed partition function and we then study the thermodynamical properties of the ideal gas in this setup. Invoking the equipartition theorem, we show that 2/3 of the degrees of freedom freeze at the high temperature regime when the thermal de Broglie wavelength becomes of the order of the Planck length. This reduction of the number of degrees of freedom suggests an effective dimensional reduction of the space from 3 to 1 at the Planck scale.

  16. Development of a data reduction expert assistant

    NASA Technical Reports Server (NTRS)

    Miller, Glenn E.

    1994-01-01

    This report documents the development and deployment of the Data Reduction Expert Assistant (DRACO). The system was successfully applied to two astronomical research projects. The first was the removal of cosmic ray artifacts from Hubble Space Telescope (HST) Wide Field Planetary Camera data. The second was the reduction and calibration of low-dispersion CCD spectra taken from a ground-based telescope. This has validated our basic approach and demonstrated the applicability of this technology. This work has been made available to the scientific community in two ways. First, we have published the work in the scientific literature and presented papers at relevant conferences. Secondly, we have made the entire system (including documentation and source code) available to the community via the World Wide Web.

  17. Dimension reduction method for ODE fluid models

    SciTech Connect

    Tartakovsky, Alexandre M.; Panchenko, Alexander; Ferris, Kim F.

    2011-09-20

    We develop a dimension reduction method for large size ODE systems obtained from a dis- cretization of partial differential equations of viscous fluid flow of nearly constant density. The method is also applicable to other large size classical particle systems with negligibly small variations of concentration. We propose a new computational closure for mesoscale balance equations based on numerical iterative deconvolution. To illustrate the computa- tional advantages of the proposed reduction method we use it to solve a system of Smoothed Particle Hydrodynamic ODEs describing Poiseuille flows driven by uniform and periodic (in space) body forces. For the Poiseuille flow driven by the uniform force the coarse solution was obtained with the zero-order deconvolution. For the flow driven by the periodic body force, the first-order deconvolution was necessary to obtain a sufficiently accurate solution.

  18. NSIDC Data Center: Energy Reduction Strategies

    SciTech Connect

    2012-05-01

    The Green Data Center Project was a successful effort to significantly reduce the energy use of the National Snow and Ice Data Center (NSIDC). Through a full retrofit of a traditional air conditioning system, the cooling energy required to meet the data center’s constant load has been reduced by over 70% for summer months and over 90% for cooler winter months. This significant reduction is achievable through the use of airside economization and a new indirect evaporative cooling cycle. One of the goals of this project was to create awareness of simple and effective energy reduction strategies for data centers. Although this particular project was able to maximize the positive effects of airside economization and indirect evaporative cooling because of its geographic location, similar strategies may also be relevant for many other sites and data centers in the United States.

  19. Infrared Imaging Data Reduction Software and Techniques

    NASA Astrophysics Data System (ADS)

    Sabbey, C. N.; McMahon, R. G.; Lewis, J. R.; Irwin, M. J.

    Developed to satisfy certain design requirements not met in existing packages (e.g., full weight map handling) and to optimize the software for large data sets (non-interactive tasks that are CPU and disk efficient), the InfraRed Data Reduction software package is a small ANSI C library of fast image processing routines for automated pipeline reduction of infrared (dithered) observations. The software includes stand-alone C programs for tasks such as running sky frame subtraction with object masking, image registration and co-addition with weight maps, dither offset measurement using cross-correlation, and object mask dilation. Although currently used for near-IR mosaic images, the modular software is concise and readily adaptable for reuse in other work. IRDR, available via anonymous ftp at ftp.ast.cam.ac.uk in pub/sabbey

  20. IRDR: InfraRed Data Reduction

    NASA Astrophysics Data System (ADS)

    Sabbey, Chris N.; McMahon, Richard G.; Lewis, James R.; Irwin, Mike J.; Babusiaux, Carine

    2011-09-01

    We describe the InfraRed Data Reduction (IRDR) software package, a small ANSI C library of fast image processing routines for automated pipeline reduction of infrared (dithered) observations. We developed the software to satisfy certain design requirements not met in existing packages (e.g., full weight map handling) and to optimize the software for large data sets (non-interactive tasks that are CPU and disk efficient). The software includes stand-alone C programs for tasks such as running sky frame subtraction with object masking, image registration and coaddition with weight maps, dither offset measurement using cross-correlation, and object mask dilation. Although we currently use the software to process data taken with CIRSI (a near-IR mosaic imager), the software is modular and concise and should be easy to adapt/reuse for other work.

  1. Toxicity reduction of photo processing wastewaters

    USGS Publications Warehouse

    Wang, W.

    1992-01-01

    The photo processing industry can be characterized by treatment processes and subsequent silver recovery. The effluents generated all contain various amounts of silver. The objectives of this study were to determine toxicity of photo processing effluents and to explore their toxicity mitigation. Six samples, from small shops to a major photo processing center, were studied. Two samples (I and VI) were found to be extremely toxic, causing 100 and 99% inhibition of duckweed frond reproduction, respectively, and were used for subsequent toxicity reduction experiments. Lime and sodium sulfide were effective for the toxicity reduction of Sample VI; both reduced its toxicity to negligible. Sample I was far more toxic and was first diluted to 2.2% and then treated with 0.5 g lime/100 mL, reducing toxicity from 100% to 12% inhibition.

  2. Noise Reduction Technologies for Turbofan Engines

    NASA Technical Reports Server (NTRS)

    Huff, Dennis L.

    2007-01-01

    Significant progress continues to be made with noise reduction for turbofan engines. NASA has conducted and sponsored research aimed at reducing noise from commercial aircraft. Since it takes many years for technologies to be developed and implemented, it is important to have aggressive technology goals that lead the target entry into service dates. Engine noise is one of the major contributors to the overall sound levels as aircraft operate near airports. Turbofan engines are commonly used on commercial transports due to their advantage for higher performance and lower noise. The noise reduction comes from combinations of changes to the engine cycle parameters and low noise design features. In this paper, an overview of major accomplishments from recent NASA research programs for engine noise will be given.

  3. Airport noise impact reduction through operations

    NASA Technical Reports Server (NTRS)

    Deloach, R.

    1981-01-01

    The airport-noise levels and annoyance model (ALAMO) developed at NASA Langley Research Center is comprised of a system of computer programs which is capable of quantifying airport community noise impact in terms of noise level, population distribution, and human subjective response to noise. The ALAMO can be used to compare the noise impact of an airport's current operating scenario with the noise impact which would result from some proposed change in airport operations. The relative effectiveness of number of noise-impact reduction alternatives is assessed for a major midwest airport. Significant reductions in noise impact are predicted for certain noise abatement strategies while others are shown to result in relatively little noise relief.

  4. Nitrogenase Reduction of Carbon-Containing Compounds

    PubMed Central

    Seefeldt, Lance C.; Yang, Zhi-Yong; Duval, Simon; Dean, Dennis R.

    2013-01-01

    Nitrogenase is an enzyme found in many bacteria and archaea that catalyzes biological dinitrogen fixation, the reduction of N2 to NH3, accounting for the major input of fixed nitrogen into the biogeochemical N cycle. In addition to reducing N2 and protons, nitrogenase can reduce a number of small, non-physiological substrates. Among these alternative substrates are included a wide array of carbon containing compounds. These compounds have provided unique insights into aspects of the nitrogenase mechanism. Recently, it was shown that carbon monoxide (CO) and carbon dioxide (CO2) can also be reduced by nitrogenase to yield hydrocarbons, opening new insights into the mechanism of small molecule activation and reduction by this complex enzyme as well as providing clues for the design of novel molecular catalysts. PMID:23597875

  5. Audio and video bit-rate reduction

    NASA Astrophysics Data System (ADS)

    Haskell, B. G.; Steele, R.

    1981-02-01

    The problem of estimating limits of bit-rate reduction for audio and video information is addressed. It is noted that binary encoding of such signals is performed by a variety of techniques, which are classified here into two categories (waveform and parameter). Encoders are compared on the basis of bits per Nyquist sample. Since minimizing the Nyquist sample requires a use of source signal statistics and human perception, audio and video sources and their statistics are discussed, as are the salient properties of hearing and vision and subjective assessments of quality. The present state of waveform and parameter encoding is assessed. It is predicted that waveform encoders will be refined to the point where bit rates will be nearly optimum but also highly variable. It is concluded that dramatic reductions will come about only through sophisticated parameter encoding.

  6. Central pedicle reduction mammoplasty: a reliable technique

    PubMed Central

    2014-01-01

    Reduction mammoplasty is one of the most frequently performed procedures in plastic surgery for macromastia or gigantomastia. Recently it is also evolved for oncoplastic breast cancer surgery due to equivalent in terms of outcome for breast conserving surgery with radiotherapy versus mastectomy. Various techniques and modification has been made to achieve long lasting and aesthetically good result with minimal morbidity. Central (posterior) reduction mammoplasty is known for its versatile pedicle due to its good blood supply and innervation for maintaining of nipple sensation with unremarkably long term complication and proven in preservation of breastfeeding function. It is one of the good and reliable options to correct breast hypertrophy and ptosis. Various modifications were introduced by different authors to improve the technique and reduce scar formation which will give more satisfaction to patients. PMID:25083495

  7. Central pedicle reduction mammoplasty: a reliable technique.

    PubMed

    See, Mee-Hoong

    2014-02-01

    Reduction mammoplasty is one of the most frequently performed procedures in plastic surgery for macromastia or gigantomastia. Recently it is also evolved for oncoplastic breast cancer surgery due to equivalent in terms of outcome for breast conserving surgery with radiotherapy versus mastectomy. Various techniques and modification has been made to achieve long lasting and aesthetically good result with minimal morbidity. Central (posterior) reduction mammoplasty is known for its versatile pedicle due to its good blood supply and innervation for maintaining of nipple sensation with unremarkably long term complication and proven in preservation of breastfeeding function. It is one of the good and reliable options to correct breast hypertrophy and ptosis. Various modifications were introduced by different authors to improve the technique and reduce scar formation which will give more satisfaction to patients. PMID:25083495

  8. Colloidal gold nanorods: from reduction to growth

    NASA Astrophysics Data System (ADS)

    Park, Kyoungweon; El-Sayed, Mostafa; Srinivasarao, Mohan

    2005-03-01

    Formation of gold nanorods(NRs) in controlled reduction condition was investigated. Gold NRs were synthesized by seed mediated method where pre-made gold nanospheres were added to a growth solution containing surfactants, reducing agent and compound of gold ion and surfactant. Reduction mechanism was manipulated by changing catalytic activity of seed. Seed of different size and capping agent coverage led to different dispersity of NRs since seed plays a role as catalyst as well as nucleation site. The difference between the redox potentials of gold species and reducing agent(δE) was controlled by the strength of reducing agent and the stability of the gold compound. As δE leading to changing the morphology of resulting gold NRs. The surface of gold NRs with a series of aspect ratio was functionalized by thiolated beta cyclodextrin which binds preferentially to the end of NRs and promotes the orientation of rod-rod pair even without host-guest interaction.

  9. The FAST HIPPARCOS Data Reduction Consortium: Overview of the Adopted Reduction Software

    NASA Astrophysics Data System (ADS)

    Kovalevsky, J.; Falin, J. L.; Pieplu, J. L.; Bernacca, P. L.; Donati, F.; Froeschle, M.; Galligani, I.; Mignard, F.; Morando, B.; Perryman, M. A. C.; Schrijver, H.; van Daalen, D. T.; van der Marel, H.; Villenave, M.; Walter, H. G.; Badiali, M.; Borriello, L.; Brouw, W. N.; Canuto, E.; Guerry, A.; Hering, R.; Huc, C.; Iorio-Fili, D.; Lacroute, P.; Lattanzi, M.; Le Poole, R. S.; Murgolo, F. P.; Preston, R. A.; Röser, S.; Sanso, F.; Wielen, R.; Belforte, P.; Bernstein, H.-H.; Bucciarelli, B.; Cardini, D.; Emanuele, A.; Fassino, B.; Lenhardt, H.; Lestrade, J. F.; Prezioso, G.; Tommasini Montanari, T.

    1992-05-01

    This paper gives the main features of the data analysis methods adopted by FAST in the calibration and processing of the Hipparcos data. The structure of the data reduction software is described and the actual processing and evaluation is presented.

  10. Feedback Control for Noise Reduction Program

    NASA Astrophysics Data System (ADS)

    Tucker, Jerry H.

    2002-12-01

    As part of Langley Research Center's continuing noise reduction program, an active noise control system (ANC) is being developed to suppress noise inside an aircraft cabin. This interior noise reduction system consists of the following major components: 1. Several accelerometers. 2. An input amplifier. 3. A digital signal processor (DSP) system that includes an analog to digital converter (ADC) and a digital to analog converter (DAC). 4. A high voltage power amplifier. 5. PZT actuators. 6. Power supply and distribution. The accelerometers detect interior panel vibrations. The accelerometer signals are fed to the input amplifier where they are conditioned prior to being sent to the ADC. The DSP receives the digitized signals form the ADC, processes these signals, and sends the result to the DAC. The DAC's analog output is used as input to the high voltage power amplifier. The power amplifier drives the PZT actuators to cancel noise form 50 to 1,300 Hz. The specific area of concern for this work was development of a DSP system that could be used for an actual flight demonstration. It was decided to base the system on a commercially available DSP board, the Spectrum Digital eZdsp. This was complicated by the fact that the ADC and DAC capabilities available on the eZdsp board were not sufficient to meet the system specification. Designing and fabricating a special ADC and DAC daughter card for the eZdsp circumvented this problem. The DSP system hardware has been successfully tested and is currently being integrated into the complete noise reduction system. This work has been completed in collaboration with another ASEE Fellow, Dr.William Edmonson from Hampton University and was conducted under the direction of the principle investigator, Dr. Qamar A. Shams of the Instrumentation Systems Development Branch, as part of a continuing noise reduction program.

  11. Pollution reduction technology program for turboprop engines

    NASA Technical Reports Server (NTRS)

    Tomlinson, J. G.

    1977-01-01

    The reduction of CO, HC, and smoke emissions while maintaining acceptable NO(x) emissions without affecting fuel consumption, durability, maintainability, and safety was accomplished. Component combustor concept screening directed toward the demonstration of advanced combustor technology required to meet the EPA exhaust emissions standards for class P2 turboprop engines was covered. The combustion system for the Allison 501-D22A engine was used, and three combustor design concepts - reverse flow, prechamber, and staged fuel were evaluated.

  12. Nitrite reduction mechanism on a Pd surface.

    PubMed

    Shin, Hyeyoung; Jung, Sungyoon; Bae, Sungjun; Lee, Woojin; Kim, Hyungjun

    2014-11-01

    Nitrate (NO3-) is one of the most harmful contaminants in the groundwater, and it causes various health problems. Bimetallic catalysts, usually palladium (Pd) coupled with secondary metallic catalyst, are found to properly treat nitrate-containing wastewaters; however, the selectivity toward N2 production over ammonia (NH3) production still requires further improvement. Because the N2 selectivity is determined at the nitrite (NO2-) reduction step on the Pd surface, which occurs after NO3- is decomposed into NO2- on the secondary metallic catalyst, we here performed density functional theory (DFT) calculations and experiments to investigate the NO2- reduction pathway on the Pd surface activated by hydrogen. Based on extensive DFT calculations on the relative energetics among ∼100 possible intermediates, we found that NO2- is easily reduced to NO* on the Pd surface, followed by either sequential hydrogenation steps to yield NH3 or a decomposition step to N* and O* (an adsorbate on Pd is denoted using an asterisk). Based on the calculated high migration barrier of N*, we further discussed that the direct combination of two N* to yield N2 is kinetically less favorable than the combination of a highly mobile H* with N* to yield NH3. Instead, the reduction of NO2- in the vicinity of the N* can yield N2O* that can be preferentially transformed into N2 via diverse reaction pathways. Our DFT results suggest that enhancing the likelihood of N* encountering NO2- in the solution phase before combination with surface H* is important for maximizing the N2 selectivity. This is further supported by our experiments on NO2- reduction by Pd/TiO2, showing that both a decreased H2 flow rate and an increased NO2- concentration increased the N2 selectivity (78.6-93.6% and 57.8-90.9%, respectively). PMID:25280017

  13. Summary of emissions reduction technology programs

    NASA Technical Reports Server (NTRS)

    Niedzwiecki, R. W.

    1977-01-01

    The NASA emissions reduction contract programs for EPA aircraft engine classes P2 (turboshaft engines), T1 (jet engines with thrust under 8000 lb), T4 (JT8D) engines), and T2 (jet engines with thrust over 8000 lb) are discussed. The most important aspects of these programs, the commonality of approaches used, the test results, and assessments regarding applications of the derived technology are summarized.

  14. OPERA: Objective Prism Enhanced Reduction Algorithms

    NASA Astrophysics Data System (ADS)

    Universidad Complutense de Madrid Astrophysics Research Group

    2015-09-01

    OPERA (Objective Prism Enhanced Reduction Algorithms) automatically analyzes astronomical images using the objective-prism (OP) technique to register thousands of low resolution spectra in large areas. It detects objects in an image, extracts one-dimensional spectra, and identifies the emission line feature. The main advantages of this method are: 1) to avoid subjectivity inherent to visual inspection used in past studies; and 2) the ability to obtain physical parameters without follow-up spectroscopy.

  15. Reductive mobilization of oxide-bound metals

    SciTech Connect

    Stone, A.T.

    1991-01-01

    We have completed a large number of experiments which examine the release of MnO{sub 2}-bound Co, Ni, and Cu. Our work has focused upon the following areas: (1) competitive adsorption among the three toxic metals and Mn(II); (2) toxic metal release upon addition of low MW organic reductants and complexants; and (3) toxic metal release upon addition of natural organic matter-rich surface waters and IHSS organic matter reference material.

  16. Graphene oxide reduction by microwave heating

    NASA Astrophysics Data System (ADS)

    Longo, Angela; Carotenuto, Gianfranco

    2016-05-01

    The possibility to prepare thermal reduced graphene oxide (Tr-GO) colloidal suspensions by microwave heating of graphene oxide (GO) suspensions in N-methyl-2-pyrrolidone (NMP) has been investigated. According to transmission electron microscopy (TEM) and absorption and emission spectroscopy characterization, such a type of thermal reduction does not lead to graphene quantum dots formation because only mono-functional oxygen-containing groups are removed.

  17. Enzymatic reduction of azo and indigoid compounds.

    PubMed

    Pricelius, S; Held, C; Murkovic, M; Bozic, M; Kokol, V; Cavaco-Paulo, A; Guebitz, G M

    2007-11-01

    A customer- and environment-friendly method for the decolorization azo dyes was developed. Azoreductases could be used both to bleach hair dyed with azo dyes and to reduce dyes in vat dyeing of textiles. A new reduced nicotinamide adenine dinucleotide-dependent azoreductase of Bacillus cereus, which showed high potential for reduction of these dyes, was purified using a combination of ammonium sulfate precipitation and chromatography and had a molecular mass of 21.5 kDa. The optimum pH of the azoreductase depended on the substrate and was within the range of pH 6 to 7, while the maximum temperature was reached at 40 degrees C. Oxygen was shown to be an alternative electron acceptor to azo compounds and must therefore be excluded during enzymatic dye reduction. Biotransformation of the azo dyes Flame Orange and Ruby Red was studied in more detail using UV-visible spectroscopy, high-performance liquid chromatography, and mass spectrometry (MS). Reduction of the azo bonds leads to cleavage of the dyes resulting in the cleavage product 2-amino-1,3 dimethylimidazolium and N approximately 1 approximately ,N approximately 1 approximately -dimethyl-1,4-benzenediamine for Ruby Red, while only the first was detected for Flame Orange because of MS instability of the expected 1,4-benzenediamine. The azoreductase was also found to reduce vat dyes like Indigo Carmine (C.I. Acid Blue 74). Hydrogen peroxide (H(2)O(2)) as an oxidizing agent was used to reoxidize the dye into the initial form. The reduction and oxidation mechanism of Indigo Carmine was studied using UV-visible spectroscopy. PMID:17891390

  18. Bibliography of greenhouse-gas reduction strategies

    SciTech Connect

    Tompkins, M.M.; Mintz, M.M.

    1995-03-01

    A bibliography of greenhouse-gas reduction strategies has been compiled to assist the Climate change Action Plan Task Force in their consideration of strategies to reduce greenhouse-gas emissions from personal motor vehicles. The document contains a summary of the literature, including it major directions and implications; and annotated listing of 32 recent pertinent documents; and a listing of a larger group of related reports.

  19. Catalyzed reduction of nitrate in aqueous solutions

    SciTech Connect

    Haas, P.A.

    1994-08-01

    Sodium nitrate and other nitrate salts in wastes is a major source of difficulty for permanent disposal. Reduction of nitrate using aluminum metal has been demonstrated, but NH{sub 3}, hydrazine, or organic compounds containing oxygen would be advantageous for reduction of nitrate in sodium nitrate solutions. Objective of this seed money study was to determine minimum conditions for reduction. Proposed procedure was batchwise heating of aqueous solutions in closed vessels with monitoring of temperatures and pressures. A simple, convenient apparatus and procedure were demonstrated for observing formation of gaseous products and collecting samples for analyses. The test conditions were 250{degree}C and 1000 psi max. Any useful reduction of sodium nitrate to sodium hydroxide as the primary product was not found. The nitrate present at pHs < 4 as HNO{sub 3} or NH{sub 4}NO{sub 3} is easily decomposed, and the effect of nitromethane at these low pHs was confirmed. When acetic acid or formic acid was added, 21 to 56% of the nitrate in sodium nitrate solutions was reduced by methanol or formaldehyde. With hydrazine and acetic acid, 73 % of the nitrate was decomposed to convert NaNO{sub 3} to sodium acetate. With hydrazine and formic acid, 36% of the nitrate was decomposed. If these products are more acceptable for final disposal than sodium nitrate, the reagents are cheap and the conversion conditions would be practical for easy use. Ammonium acetate or formate salts did not significantly reduce nitrate in sodium nitrate solutions.

  20. OXIDATION-REDUCTION CAPACITIES OF AQUIFER SOLIDS

    EPA Science Inventory

    Measurements of the oxidation (i.e., of aqueous Cr2+) and reduction (i.e., of aqueous Cr2O72- and H202) capacities of aquifer solids and groundwater have been made on samples from a sand-and-gravel aquifer. The gro...

  1. Late Reduction Textures in Almahata Sitta Ureilite

    NASA Technical Reports Server (NTRS)

    Herrin, J. S.; Le, L.; Zolensky, M. E.; Ito, M.; Jenniskens, P.; Shaddad, M. H.

    2009-01-01

    The Almahata Sitta ureilite, derived from asteroid 2008 TC3, consists of many individual fragments recovered from the Nubian dessert strewn field [1]. Like most ureilites, it contains abundant carbon and exhibits examples of disequilibrium textures that record a late reduction event accompanied by rapid cooling (tens of degC/h) from high temperatures (1150-1300 C). Variations in Fe/Mg of silicate minerals are accompanied by variations in Fe/Mn, indicating loss of Fe into metal [2]. In coarser-grained fragments of Almahata Sitta, olivine exhibits irregular high mg# rims in contact with networks of interstitial metal 5- 20 microns in typical thickness. This is a common ureilite texture thought to be driven by the reaction of graphite to a CO gas phase and the concurrent reduction of FeO in olivine to Fe metal, with excess silica going primarily into pyroxene (2MgFeSiO4 + C approaches MgSiO4 + MgSiO3 + 2Fe + CO) [3, see also 4,5,6]. Other fragments of Almahata Sitta exhibit anomalous textures such as fine grain size, high porosity, and abundant graphite. Within these fragments pyroxene locally exhibits high-mg# rims in contact with metal and a discreet silica phase, suggesting that the reduction mechanism MgFeSi2O6 + C approaches MgSiO3 + Fe + SiO2 + CO. Metals in Almahata Sitta are particularly unaltered in comparison to ureilite finds. Variations in minor and trace element composition of this metal might partly result from localized dilution as iron is supplied by reduction of silicates.

  2. Tetracene Formation by On-Surface Reduction.

    PubMed

    Krüger, Justus; Pavliček, Niko; Alonso, José M; Pérez, Dolores; Guitián, Enrique; Lehmann, Thomas; Cuniberti, Gianaurelio; Gourdon, André; Meyer, Gerhard; Gross, Leo; Moresco, Francesca; Peña, Diego

    2016-04-26

    We present the on-surface reduction of diepoxytetracenes to form genuine tetracene on Cu(111). The conversion is achieved by scanning tunneling microscopy (STM) tip-induced manipulation as well as thermal activation and is conclusively demonstrated by means of atomic force microscopy (AFM) with atomic resolution. We observe that the metallic surface plays an important role in the deoxygenation and for the planarization after bond cleavage. PMID:26963892

  3. METHOD FOR THE REDUCTION OF URANIUM COMPOUNDS

    DOEpatents

    Cooke, W.H.; Crawford, J.W.C.

    1959-05-12

    An improved technique of preparing massive metallic uranium by the reaction at elevated temperature between an excess of alkali in alkaline earth metal and a uranium halide, such ss uranium tetrafluoride is presented. The improvement comprises employing a reducing atmosphere of hydrogen or the like, such as coal gas, in the vessel during the reduction stage and then replacing the reducing atmosphere with argon gas prior to cooling to ambient temperature.

  4. (Bioprocessing of lignite coals using reductive microorganisms)

    SciTech Connect

    Crawford, D.L.

    1990-01-01

    The objectives of this report are to: (1) characterize selected aerobic bacterial strains for their abilities to depolymerize lignite coal polymers, and isolate and identify the extracellular enzymes responsible for depolymerization of the coal; (2) characterize selected strictly anaerobic bacteria, that were previously shown to reductively transform coal substructure model compounds, for the ability to similarly transform polymeric coal; and (3) isolate more strains of anaerobic bacteria by enrichment using additional coal substructure model compounds and coal as substrates.

  5. Dimensional reduction without continuous extra dimensions

    SciTech Connect

    Chamseddine, Ali H.; Froehlich, J.; Schubnel, B.; Wyler, D.

    2013-01-15

    We describe a novel approach to dimensional reduction in classical field theory. Inspired by ideas from noncommutative geometry, we introduce extended algebras of differential forms over space-time, generalized exterior derivatives, and generalized connections associated with the 'geometry' of space-times with discrete extra dimensions. We apply our formalism to theories of gauge- and gravitational fields and find natural geometrical origins for an axion- and a dilaton field, as well as a Higgs field.

  6. Failure detection system risk reduction assessment

    NASA Technical Reports Server (NTRS)

    Aguilar, Robert B. (Inventor); Huang, Zhaofeng (Inventor)

    2012-01-01

    A process includes determining a probability of a failure mode of a system being analyzed reaching a failure limit as a function of time to failure limit, determining a probability of a mitigation of the failure mode as a function of a time to failure limit, and quantifying a risk reduction based on the probability of the failure mode reaching the failure limit and the probability of the mitigation.

  7. Piecewise linear dimension reduction for nonnegative data

    NASA Astrophysics Data System (ADS)

    Shen, Bin; Wang, Qifan; Allebach, Jan P.

    2015-03-01

    In past decade, the increasing popularity of imaging devices, especially smart phones, has led to a great increase in the amount of visual data. The rapidly increasing large scale data pose challenges to the storage and computational resources, and make many computer vision and pattern recognition tasks prohibitively expensive. Dimension reduction techniques explore hidden structures of the original high dimensional data and learn new low dimensional representation to alleviate the challenges. Popular dimension reduction techniques, such as PCA and NMF, do an efficient linear mapping to low dimensional space, while nonlinear techniques overcomes the limitation of linearity at the cost of expensive computational cost (e.g. computing the pairwise distance to find the geodesic distance). In this paper, a piecewise linear dimension reduction technique with global consistency and smoothness constraint is proposed to overcome the restriction of linearity at relatively low cost. Extensive experimental results show that the proposed methods outperform the linear method in the scenario of clustering both consistently and significantly.

  8. Dimension Reduction With Extreme Learning Machine.

    PubMed

    Kasun, Liyanaarachchi Lekamalage Chamara; Yang, Yan; Huang, Guang-Bin; Zhang, Zhengyou

    2016-08-01

    Data may often contain noise or irrelevant information, which negatively affect the generalization capability of machine learning algorithms. The objective of dimension reduction algorithms, such as principal component analysis (PCA), non-negative matrix factorization (NMF), random projection (RP), and auto-encoder (AE), is to reduce the noise or irrelevant information of the data. The features of PCA (eigenvectors) and linear AE are not able to represent data as parts (e.g. nose in a face image). On the other hand, NMF and non-linear AE are maimed by slow learning speed and RP only represents a subspace of original data. This paper introduces a dimension reduction framework which to some extend represents data as parts, has fast learning speed, and learns the between-class scatter subspace. To this end, this paper investigates a linear and non-linear dimension reduction framework referred to as extreme learning machine AE (ELM-AE) and sparse ELM-AE (SELM-AE). In contrast to tied weight AE, the hidden neurons in ELM-AE and SELM-AE need not be tuned, and their parameters (e.g, input weights in additive neurons) are initialized using orthogonal and sparse random weights, respectively. Experimental results on USPS handwritten digit recognition data set, CIFAR-10 object recognition, and NORB object recognition data set show the efficacy of linear and non-linear ELM-AE and SELM-AE in terms of discriminative capability, sparsity, training time, and normalized mean square error. PMID:27214902

  9. Conceptual design of a data reduction system

    NASA Technical Reports Server (NTRS)

    1983-01-01

    A telemetry data processing system was defined of the Data Reduction. Data reduction activities in support of the developmental flights of the Space Shuttle were used as references against which requirements are assessed in general terms. A conceptual system design believed to offer significant throughput for the anticipated types of data reduction activities is presented. The design identifies the use of a large, intermediate data store as a key element in a complex of high speed, single purpose processors, each of which performs predesignated, repetitive operations on either raw or partially processed data. The recommended approach to implement the design concept is to adopt an established interface standard and rely heavily on mature or promising technologies which are considered main stream of the integrated circuit industry. The design system concept, is believed to be implementable without reliance on exotic devices and/or operational procedures. Numerical methods were employed to examine the feasibility of digital discrimination of FDM composite signals, and of eliminating line frequency noises in data measurements.

  10. Delivering Data Reduction Pipelines to Science Users

    NASA Astrophysics Data System (ADS)

    Freudling, Wolfram

    2015-12-01

    Producing science data products that can be used to extract science is the ultimate objective of astronomical observation. The complexity of modern instruments require highly specialized algorithms for data organization and data reduction. Data visualization and user interaction, both to fine tune individual algorithms and to modify the data flow itself, are essential for the production of science grade products that fully exploits the potential of the raw data. ESO has a long history of providing specialized algorithms called recipes for each of its instruments. ESOREFLEX is an environment to deliver complete data reduction workflows that include these recipes to the users. These workflows encapsulate the best practise data reduction for the data from a particular instrument, and at the same can easily be modified by the user. ESOREFLEX includes systems for automatic data organization and visualization, interaction with recipes, and the exploration of the provenance tree of intermediate and final data products. ESOREFLEX allows ESO to deliver recipes that are used in its unsupervised operational pipelines to [...

  11. Multiple kernel learning for dimensionality reduction.

    PubMed

    Lin, Yen-Yu; Liu, Tyng-Luh; Fuh, Chiou-Shann

    2011-06-01

    In solving complex visual learning tasks, adopting multiple descriptors to more precisely characterize the data has been a feasible way for improving performance. The resulting data representations are typically high-dimensional and assume diverse forms. Hence, finding a way of transforming them into a unified space of lower dimension generally facilitates the underlying tasks such as object recognition or clustering. To this end, the proposed approach (termed MKL-DR) generalizes the framework of multiple kernel learning for dimensionality reduction, and distinguishes itself with the following three main contributions: first, our method provides the convenience of using diverse image descriptors to describe useful characteristics of various aspects about the underlying data. Second, it extends a broad set of existing dimensionality reduction techniques to consider multiple kernel learning, and consequently improves their effectiveness. Third, by focusing on the techniques pertaining to dimensionality reduction, the formulation introduces a new class of applications with the multiple kernel learning framework to address not only the supervised learning problems but also the unsupervised and semi-supervised ones. PMID:20921580

  12. Evaluation of SSME test data reduction methods

    NASA Technical Reports Server (NTRS)

    Santi, L. Michael

    1994-01-01

    Accurate prediction of hardware and flow characteristics within the Space Shuttle Main Engine (SSME) during transient and main-stage operation requires a significant integration of ground test data, flight experience, and computational models. The process of integrating SSME test measurements with physical model predictions is commonly referred to as data reduction. Uncertainties within both test measurements and simplified models of the SSME flow environment compound the data integration problem. The first objective of this effort was to establish an acceptability criterion for data reduction solutions. The second objective of this effort was to investigate the data reduction potential of the ROCETS (Rocket Engine Transient Simulation) simulation platform. A simplified ROCETS model of the SSME was obtained from the MSFC Performance Analysis Branch . This model was examined and tested for physical consistency. Two modules were constructed and added to the ROCETS library to independently check the mass and energy balances of selected engine subsystems including the low pressure fuel turbopump, the high pressure fuel turbopump, the low pressure oxidizer turbopump, the high pressure oxidizer turbopump, the fuel preburner, the oxidizer preburner, the main combustion chamber coolant circuit, and the nozzle coolant circuit. A sensitivity study was then conducted to determine the individual influences of forty-two hardware characteristics on fourteen high pressure region prediction variables as returned by the SSME ROCETS model.

  13. Reduction in Defect Content of ODS Alloys

    SciTech Connect

    Ritherdon, J

    2001-05-15

    The work detailed within this report is a continuation of earlier work carried out under contract number 1DX-SY382V. The earlier work comprises a literature review of the sources and types of defects found principally in Fe-based ODS alloys as well as experimental work designed to identify defects in the prototype ODS-Fe{sub 3}Al alloy, deduce their origins and to recommend methods of defect reduction. The present work is an extension of the experimental work already reported and concentrates on means of reduction of defects already identified rather than the search for new defect types. This report also includes results gathered during powder separation trials, conducted by the University of Groningen, Netherlands and coordinated by the University of Liverpool, involving the separation of different metallic powders in terms of their differing densities. The scope and objectives of the present work were laid out in the technical proposal ''Reduction in Defect Content in ODS Alloys-III''. All the work proposed in the ''Statement of Work'' section of the technical proposal has been carried out and all work extra to the ''Statement of Work'' falls within the context of an ODS-Fe{sub 3}Al alloy of improved overall quality and potential creep performance in the consolidated form. The outturn of the experimental work performed is reported in the following sections.

  14. Chlorophenol degradation coupled to sulfate reduction

    SciTech Connect

    Haeggblom, M.M.; Young, L.Y. )

    1990-11-01

    We studied chlorophenol degradation under sulfate-reducing conditions with an estuarine sediment inoculum. These cultures degraded 0.1 mM 2-, 3-, and 4-chlorophenol and 2,4-dichlorophenol within 120 to 220 days, but after refeeding with chlorophenols degradation took place in 40 days or less. Further refeeding greatly enhanced the rate of degradation. Sulfate consumption by the cultures corresponded to the stoichiometric values expected for complete oxidation of the chlorophenol to CO{sub 2}. Formation of sulfide from sulfate was confirmed with a radiotracer technique. No methane was formed, verifying that sulfate reduction was the electron sink. Addition of molybdate, a specific inhibitor of sulfate reduction, inhibited chlorophenol degradation completely. These results indicate that the chlorophenols were mineralized under sulfidogenic conditions and that substrate oxidation was coupled to sulfate reduction. In acclimated cultures the three monochlorophenol isomers and 2,4-dichlorophenol were degraded at rates of 8 to 37 {mu}mol liter{sup {minus}1} day{sup {minus}1}. The relative rates of degradation were 4-chlorophenol > 3-chlorophenol > 2-chlorophenol, 2,4-dichlorophenol. Sulfidogenic cultures initiated with biomass from an anaerobic bioreactor used in treatment of pulp-bleaching effluents dechlorinated 2,4-dichlorophenol to 4-chlorophenol, which persisted, whereas 2,6-dichlorophenol was sequentially dechlorinated first to 2-chlorophenol and then to phenol.

  15. The mechanism of bacterial indigo reduction.

    PubMed

    Nicholson, S K; John, P

    2005-07-01

    The reduction of water-insoluble indigo by the recently isolated moderate thermophile, Clostridium isatidis, has been studied with the aim of developing a sustainable technology for industrial indigo reduction. The ability to reduce indigo was not shared with C. aurantibutyricum, C. celatum and C. papyrosolvens, but C. papyrosolvens could reduce indigo carmine (5,5'-indigosulfonic acid), a soluble indigo derivative. The supernatant from cultures of C. isatidis, but not from cultures of the other bacteria tested, decreased indigo particle size to one-tenth diameter. Addition of madder powder, anthraquinone-2,6-disulfonic acid, and humic acid all stimulated indigo reduction by C. isatidis. Redox potentials of cultures of C. isatidis were about 100 mV more negative than those of C. aurantibutyricum, C. celatum and C. papyrosolvens, and reached -600 mV versus the SCE in the presence of indigo, but potentials were not consistently affected by the addition of the quinone compounds, which probably act by modifying the surface of the bacteria or indigo particles. It is concluded that C. isatidis can reduce indigo because (1) it produces an extracellular factor that decreases indigo particle size, and (2) it generates a sufficiently reducing potential. PMID:15635460

  16. Reduction Methods for Total Reaction Cross Sections

    NASA Astrophysics Data System (ADS)

    Gomes, P. R. S.; Mendes Junior, D. R.; Canto, L. F.; Lubian, J.; de Faria, P. N.

    2016-03-01

    The most frequently used methods to reduce fusion and total reaction excitation functions were investigated in a very recent paper Canto et al. (Phys Rev C 92:014626, 2015). These methods are widely used to eliminate the influence of masses and charges in comparisons of cross sections for weakly bound and tightly bound systems. This study reached two main conclusions. The first is that the fusion function method is the most successful procedure to reduce fusion cross sections. Applying this method to theoretical cross sections of single channel calculations, one obtains a system independent curve (the fusion function), that can be used as a benchmark to fusion data. The second conclusion was that none of the reduction methods available in the literature is able to provide a universal curve for total reaction cross sections. The reduced single channel cross sections keep a strong dependence of the atomic and mass numbers of the collision partners, except for systems in the same mass range. In the present work we pursue this problem further, applying the reduction methods to systems within a limited mass range. We show that, under these circumstances, the reduction of reaction data may be very useful.

  17. Skin Reduction Nipple-Sparing Mastectomy.

    PubMed

    Dietz, Jill; Fedele, Greg

    2015-10-01

    Nipple-sparing mastectomy has been shown to be a safe and effective treatment for many patients with early stage breast cancer. Large-breasted women who are gene positive or who have early breast cancer are not traditionally candidates for nipple-sparing mastectomy. The blood supply to the nipple is via the breast tissue and also the dermis, both of which would be severed if standard skin reduction were combined with mastectomy. This video shows how a nipple-sparing mastectomy can be combined with skin reduction while preserving the blood supply to the nipple. The excess skin is deepithelialized to preserve the dermal vessels. After mastectomy, the excess skin is imbricated to reduce the skin envelope. The deepithelialized lower flap "autoderm" can be sewn to the pectoralis muscle for coverage of the tissue expander. This technique allows large-breasted and ptotic patients to undergo mastectomy with preservation of their nipple-areolar complex as well as skin reduction to yield an improved cosmetic result. PMID:26271393

  18. Evaluation of SSME test data reduction methods

    NASA Astrophysics Data System (ADS)

    Santi, L. Michael

    1994-10-01

    Accurate prediction of hardware and flow characteristics within the Space Shuttle Main Engine (SSME) during transient and main-stage operation requires a significant integration of ground test data, flight experience, and computational models. The process of integrating SSME test measurements with physical model predictions is commonly referred to as data reduction. Uncertainties within both test measurements and simplified models of the SSME flow environment compound the data integration problem. The first objective of this effort was to establish an acceptability criterion for data reduction solutions. The second objective of this effort was to investigate the data reduction potential of the ROCETS (Rocket Engine Transient Simulation) simulation platform. A simplified ROCETS model of the SSME was obtained from the MSFC Performance Analysis Branch . This model was examined and tested for physical consistency. Two modules were constructed and added to the ROCETS library to independently check the mass and energy balances of selected engine subsystems including the low pressure fuel turbopump, the high pressure fuel turbopump, the low pressure oxidizer turbopump, the high pressure oxidizer turbopump, the fuel preburner, the oxidizer preburner, the main combustion chamber coolant circuit, and the nozzle coolant circuit. A sensitivity study was then conducted to determine the individual influences of forty-two hardware characteristics on fourteen high pressure region prediction variables as returned by the SSME ROCETS model.

  19. Electrically induced reduction of trichloroethene in clay.

    PubMed

    Jin, Song; Fallgren, Paul H

    2010-01-15

    Chlorinated compounds such as trichloroethene (TCE) are recalcitrant contaminants commonly detected in soil and groundwater. Contemporary remedies such as electron donor amendment tend to be less or ineffective in treating chlorinated compounds in matrix of lower permeability, such as clay. In this study, electrically induced reduction (EIR) was tested by inserting electrodes in saturated clay containing 122.49-125.43 mg TCE kg(-1). Weak electric potentials (E) of 6, 9, and 12 V m(-1) were applied, and up to 97% of TCE were depleted during the study period. Corresponding increases in chloride concentrations was observed during TCE depletion, indicating a reductive dechlorination pathway. No migration of TCE was observed between the two electrodes, neither were intermediate compounds such as dichloroethene (DCE) or vinyl chloride (VC). Results were also tested against a mathematical equation we previously established for field applications. Electrically induced reduction may offer a novel method for in situ degradation of chlorinated contaminants, especially in low-permeable media such as clay. PMID:19729244

  20. Drag reduction using slippery liquid infused surfaces

    NASA Astrophysics Data System (ADS)

    Hultmark, Marcus; Stone, Howard; Smits, Alexander; Jacobi, Ian; Samaha, Mohamed; Wexler, Jason; Shang, Jessica; Rosenberg, Brian; Hellström, Leo; Fan, Yuyang

    2013-11-01

    A new method for passive drag reduction is introduced. A surface treatment inspired by the Nepenthes pitcher plant, previously developed by Wong et al. (2011), is utilized and its design parameters are studied for increased drag reduction and durability. Nano- and micro-structured surfaces infused with a lubricant allow for mobility within the lubricant itself when the surface is exposed to flow. The mobility causes slip at the fluid-fluid interface, which drastically reduces the viscous friction. These new surfaces are fundamentally different from the more conventional superhydrophobic surfaces previously used in drag reduction studies, which rely on a gas-liquid interface. The main advantage of the liquid infused surfaces over the conventional surfaces is that the lubricant adheres more strongly to the surface, decreasing the risk of failure when exposed to turbulence and other high-shear flows. We have shown that these surfaces can reduce viscous drag up to 20% in both Taylor-Couette flow and in a parallel plate rheometer. Supported under ONR Grants N00014-12-1-0875 and N00014-12-1-0962 (program manager Ki-Han Kim).

  1. Estimating a percent reduction in load

    NASA Astrophysics Data System (ADS)

    Millard, Steven P.

    This article extends the work of Cohn et al. [1989] on estimating constituent loads to the problem of estimating a percent reduction in load. Three estimators are considered: the maximum likelihood (MLE), a ``bias-corrected'' maximum likelihood (BCMLE), and the minimum variance unbiased (MVUE). In terms of root-mean-square error, both the MVUE and BCMLE are superior to the MLE, and for the cases considered here there is no appreciable difference between the MVUE and the BCMLE. The BCMLE is constructed from quantities computed by most regression packages and is therefore simpler to compute than the MVUE (which involves approximating an infinite series). All three estimators are applied to a case study in which an agricultural tax in the Everglades agricultural area is tied to an observed percent reduction in phosphorus load. For typical hydrological data, very large sample sizes (of the order of 100 observations each in the baseline period and after) are required to estimate a percent reduction in load with reasonable precision.

  2. Bronchoscopic lung volume reduction in severe emphysema.

    PubMed

    Ingenito, Edward P; Wood, Douglas E; Utz, James P

    2008-05-01

    Lung volume reduction surgery (LVRS) produces physiological, symptomatic, and survival benefits in selected patients with advanced emphysema. Because it is associated with significant morbidity, mortality, and cost, nonsurgical alternatives for achieving volume reduction have been developed. Three bronchoscopic lung volume reduction (BLVR) approaches have shown promise and reached later-stage clinical trials. These include the following: (1) placement of endobronchial one-way valves designed to promote atelectasis by blocking inspiratory flow; (2) formation of airway bypass tracts using a radiofrequency catheter designed to facilitate emptying of damaged lung regions with long expiratory times; and (3) instillation of biological adhesives designed to collapse and remodel hyperinflated lung. The limited clinical data currently available suggest that all three techniques are reasonably safe. However, efficacy signals have been substantially smaller and less durable than those observed after LVRS. Studies to optimize patient selection, refine treatment strategies, characterize procedural safety, elucidate mechanisms of action, and characterize short- and longer-term effectiveness of these approaches are ongoing. Results will be available over the next few years and will determine whether BLVR represents a safe and effective alternative to LVRS. PMID:18453355

  3. Three companies earn waste reduction awards

    SciTech Connect

    Not Available

    1989-10-01

    The HDN Company of Muscatine, Rockwell International of Cedar Rapids, and Enviromiser of Cedar Falls received Iowa Waste Reduction Awards last month in a program sponsored by the Iowa Waste Reduction Center at the University of Northern Iowa. The HDN Company produces metal tubing for chairs and desk legs. A nickel/chrome plating line is part of the production process, and plating waste goes to a treatment system that cleans discharge wastewater and generates a hazardous sludge. The company's project dropped sludge from 62 tons a year to 2.3 tons. The project saves the company $89,250 annually. Rockwell International's Avionics group produces rinse water and spent plating baths from plating, etching and other metal-finishing operations. Its new approach involves segregation of waste streams and recovery of metals from wastewater. Result is salable scrap metal and clean water, an 81 percent reduction in hazardous waste, and cost savings annually of $250,000. Enviromiser is a system for recovering, filtering and reusing the refrigerant chlorofluorocarbons (CFCs) from large building and commercial cooling units. The system can reclaim more than 95 percent of the refrigerant contained in air conditioning units when repairs or equipment replacement is required. Equipment payback was achieved after first use and the system has been operating successfully at the University.

  4. Reduction technique for tire contact problems

    NASA Technical Reports Server (NTRS)

    Noor, Ahmed K.; Peters, Jeanne M.

    1995-01-01

    A reduction technique and a computational procedure are presented for predicting the tire contact response and evaluating the sensitivity coefficients of the different response quantities. The sensitivity coefficients measure the sensitivity of the contact response to variations in the geometric and material parameters of the tire. The tire is modeled using a two-dimensional laminated anisotropic shell theory with the effects of variation in geometric and material parameters, transverse shear deformation, and geometric nonlinearities included. The contact conditions are incorporated into the formulation by using a perturbed Lagrangian approach with the fundamental unknowns consisting of the stress resultants, the generalized displacements, and the Lagrange multipliers associated with the contact conditions. The elemental arrays are obtained by using a modified two-field, mixed variational principle. For the application of the reduction technique, the tire finite element model is partitioned into two regions. The first region consists of the nodes that are likely to come in contact with the pavement, and the second region includes all the remaining nodes. The reduction technique is used to significantly reduce the degrees of freedom in the second region. The effectiveness of the computational procedure is demonstrated by a numerical example of the frictionless contact response of the space shuttle nose-gear tire, inflated and pressed against a rigid flat surface.

  5. Advanced CO2 Removal and Reduction System

    NASA Technical Reports Server (NTRS)

    Alptekin, Gokhan; Dubovik, Margarita; Copeland, Robert J.

    2011-01-01

    An advanced system for removing CO2 and H2O from cabin air, reducing the CO2, and returning the resulting O2 to the air is less massive than is a prior system that includes two assemblies . one for removal and one for reduction. Also, in this system, unlike in the prior system, there is no need to compress and temporarily store CO2. In this present system, removal and reduction take place within a single assembly, wherein removal is effected by use of an alkali sorbent and reduction is effected using a supply of H2 and Ru catalyst, by means of the Sabatier reaction, which is CO2 + 4H2 CH4 + O2. The assembly contains two fixed-bed reactors operating in alternation: At first, air is blown through the first bed, which absorbs CO2 and H2O. Once the first bed is saturated with CO2 and H2O, the flow of air is diverted through the second bed and the first bed is regenerated by supplying it with H2 for the Sabatier reaction. Initially, the H2 is heated to provide heat for the regeneration reaction, which is endothermic. In the later stages of regeneration, the Sabatier reaction, which is exothermic, supplies the heat for regeneration.

  6. Ferric Iron Reduction by Acidophilic Heterotrophic Bacteria

    PubMed Central

    Johnson, D. Barrie; McGinness, Stephen

    1991-01-01

    Fifty mesophilic and five moderately thermophilic strains of acidophilic heterotrophic bacteria were tested for the ability to reduce ferric iron in liquid and solid media under aerobic conditions; about 40% of the mesophiles (but none of the moderate thermophiles) displayed at least some capacity to reduce iron. Both rates and extents of ferric iron reduction were highly strain dependent. No acidophilic heterotroph reduced nitrate or sulfate, and (limited) reduction of manganese(IV) was noted in only one strain (Acidiphilium facilis), an acidophile which did not reduce iron. Insoluble forms of ferric iron, both amorphous and crystalline, were reduced, as well as soluble iron. There was evidence that, in at least some acidophilic heterotrophs, iron reduction was enzymically mediated and that ferric iron could act as a terminal electron acceptor. In anaerobically incubated cultures, bacterial biomass increased with increasing concentrations of ferric but not ferrous iron. Mixed cultures of Thiobacillus ferrooxidans or Leptospirillum ferrooxidans and an acidophilic heterotroph (SJH) produced sequences of iron cycling in ferrous iron-glucose media. PMID:16348395

  7. Size reduction of complex networks preserving modularity

    SciTech Connect

    Arenas, A.; Duch, J.; Fernandez, A.; Gomez, S.

    2008-12-24

    The ubiquity of modular structure in real-world complex networks is being the focus of attention in many trials to understand the interplay between network topology and functionality. The best approaches to the identification of modular structure are based on the optimization of a quality function known as modularity. However this optimization is a hard task provided that the computational complexity of the problem is in the NP-hard class. Here we propose an exact method for reducing the size of weighted (directed and undirected) complex networks while maintaining invariant its modularity. This size reduction allows the heuristic algorithms that optimize modularity for a better exploration of the modularity landscape. We compare the modularity obtained in several real complex-networks by using the Extremal Optimization algorithm, before and after the size reduction, showing the improvement obtained. We speculate that the proposed analytical size reduction could be extended to an exact coarse graining of the network in the scope of real-space renormalization.

  8. MADR: metal artifact detection and reduction

    NASA Astrophysics Data System (ADS)

    Jaiswal, Sunil Prasad; Ha, Sungsoo; Mueller, Klaus

    2016-04-01

    Metal in CT-imaged objects drastically reduces the quality of these images due to the severe artifacts it can cause. Most metal artifacts reduction (MAR) algorithms consider the metal-affected sinogram portions as the corrupted data and replace them via sophisticated interpolation methods. While these schemes are successful in removing the metal artifacts, they fail to recover some of the edge information. To address these problems, the frequency shift metal artifact reduction algorithm (FSMAR) was recently proposed. It exploits the information hidden in the uncorrected image and combines the high frequency (edge) components of the uncorrected image with the low frequency components of the corrected image. Although this can effectively transfer the edge information of the uncorrected image, it also introduces some unwanted artifacts. The essential problem of these algorithms is that they lack the capability of detecting the artifacts and as a result cannot discriminate between desired and undesired edges. We propose a scheme that does better in these respects. Our Metal Artifact Detection and Reduction (MADR) scheme constructs a weight map which stores whether a pixel in the uncorrected image belongs to an artifact region or a non-artifact region. This weight matrix is optimal in the Linear Minimum Mean Square Sense (LMMSE). Our results demonstrate that MADR outperforms the existing algorithms and ensures that the anatomical structures close to metal implants are better preserved.

  9. Data reduction from twinned RNA crystals.

    PubMed

    Lietzke, S E; Carperos, V E; Kundrot, C E

    1996-07-01

    Methods were developed to process diffraction data from epitaxically twinned crystals. Four programs for data reduction and two display programs were developed to augment the data-reduction program XDS [Kabsch (1988). J. Appl. Cryst. 21, 916-924]. The programs can be generalized for use with other data-reduction software that provides the user with a list of the reflections used to determine lattice constants and crystal orientation. LATTICE_VIEW generates a PDB file containing 'water molecules' at the reciprocal-space coordinates of the strong spots found in the initial data frames. The PDB file is visualized to identify spots that belong to the same lattice, obtain unit-cell dimensions for a lattice, and assess data quality. VECTOR_MATCH is used to find additional spots belonging to a lattice. ACCOUNT4 determines which spots have been processed by XDS. COMFORT discards reflections that are too close to a reflection in another lattice. The display programs provide useful visual information on the quality of the crystal orientations used. Data with an R(merge) of 7.1% at 2.4 A resolution were obtained from epitaxically twinned crystals of an RNA dodecamer. The data were of sufficient quality to solve the structure with a combination of molecular replacement and single isomorphous replacement methods. PMID:15299632

  10. Mechanisms of bacterially catalyzed reductive dehalogenation

    SciTech Connect

    Picardal, F.W.

    1992-12-31

    Nine bacteria were tested for the ability to dehalogenate tetrachloromethane (CT), tetrachloroethene (PCE), and 1, 1, 1-trichloroethane (TCA) under anaerobic conditions. Three bacteria were able to reductively dehalogenate CT. Dehalogenation ability was not readily linked to a common metabolism or changes in culture redox potential. None of the bacteria tested were able to dehalogenate PCE or TCA. One of the bacteria capable of dehalogenating CT, Shewanella putrefaciens, was chosen as a model organism to study mechanisms of bacterially catalyzed reductive dehalogenation. The effect of a variety of alternate electron acceptors on CT dehalogenation ability by S. putrefaciens was determined. oxygen and nitrogen oxides were inhibitory but Fe (III), trimethylamine oxide, and fumarate were not. A model of the electron transport chain of S. putrefaciens was developed to explain inhibition patterns. A period of microaerobic growth prior to CT exposure increased the ability of S. putrefaciens to dehalogenate CT. A microaerobic growth period also increased cytochrome concentrations. A relationship between cytochrome content and dehalogenation ability was developed from studies in which cytochrome concentrations in S. putrefaciens were manipulated by changing growth conditions. Stoichiometry studies using {sup 14}C-CT suggested that CT was first reduced to form a trichloromethyl radical. Reduction of the radical to produce chloroform and reaction of the radical with cellular biochemicals explained observed product distributions. Carbon dioxide or other fully dehalogenated products were not found.

  11. Tensor integrand reduction via Laurent expansion

    DOE PAGESBeta

    Hirschi, Valentin; Peraro, Tiziano

    2016-06-09

    We introduce a new method for the application of one-loop integrand reduction via the Laurent expansion algorithm, as implemented in the public C++ library Ninja. We show how the coefficients of the Laurent expansion can be computed by suitable contractions of the loop numerator tensor with cut-dependent projectors, making it possible to interface Ninja to any one-loop matrix element generator that can provide the components of this tensor. We implemented this technique in the Ninja library and interfaced it to MadLoop, which is part of the public MadGraph5_aMC@NLO framework. We performed a detailed performance study, comparing against other public reductionmore » tools, namely CutTools, Samurai, IREGI, PJFry++ and Golem95. We find that Ninja out-performs traditional integrand reduction in both speed and numerical stability, the latter being on par with that of the tensor integral reduction tool Golem95 which is however more limited and slower than Ninja. Lastly, we considered many benchmark multi-scale processes of increasing complexity, involving QCD and electro-weak corrections as well as effective non-renormalizable couplings, showing that Ninja’s performance scales well with both the rank and multiplicity of the considered process.« less

  12. A noniterative improvement of Guyan reduction

    NASA Technical Reports Server (NTRS)

    Ganesan, N.

    1993-01-01

    In determining the natural modes and frequencies of a linear elastic structure, Guyan reduction is often used to reduce the size of the mass and stiffness matrices and the solution of the reduced system is obtained first. The reduced system modes are then expanded to the size of the original system by using a static transformation linking the retained degrees of freedom to the omitted degrees of freedom. In the present paper, the transformation matrix of Guyan reduction is modified to include additional terms from a series accounting for the inertial effects. However, the inertial terms are dependent on the unknown frequencies. A practical approximation is employed to compute the inertial terms without any iteration. This new transformation is implemented in NASTRAN using a DMAP sequence alter. Numerical examples using a cantilever beam illustrate the necessary condition for allowing a large number of additional terms in the proposed series correction of Guyan reduction. A practical example of a large model of the Plasma Motor Generator module to be flown on a Delta launch vehicle is also presented.

  13. Integrated diesel engine NOx reduction technology development

    SciTech Connect

    Hoelzer, J.; Zhu, J.; Savonen, C.L.; Kharas, K.C.C.; Bailey, O.H.; Miller, M.; Vuichard, J.

    1997-12-31

    The effectiveness of catalyst performance is a function of the inlet exhaust gas temperature, gas flow rate, concentration of NO{sub x} and oxygen, and reductant quantity and species. Given this interrelationship, it becomes immediately clear that an integrated development approach is necessary. Such an approach is taken in this project. As such, the system development path is directed by an engine-catalyst engineering team. Of the tools at the engine engineer`s disposal the real-time aspects of computer assisted subsystem modeling is valuable. It will continue to be the case as ever more subtle improvements are needed to meet competitive performance, durability, and emission challenges. A review of recent prototype engines has shown that considerable improvements to base diesel engine technology are being made. For example, HSDI NO{sub x} has been reduced by a factor of two within the past ten years. However, additional substantial NO{sub x}/PM reduction is still required for the future. A viable lean NO{sub x} catalyst would be an attractive solution to this end. The results of recent high and low temperature catalyst developments were presented. High temperature base metal catalysts have been formulated to produce very good conversion efficiency and good thermal stability, albeit at temperatures near the upper range of diesel engine operation. Low temperature noble metal catalysts have been developed to provide performance of promising 4-way control but need increased NO{sub x} reduction efficiency.

  14. The FAST Hipparcos data reduction consortium - Overview of the reduction software

    NASA Technical Reports Server (NTRS)

    Kovalevsky, J.; Falin, J. L.; Pieplu, J. L.; Bernacca, P. L.; Donati, F.; Froeschle, M.; Galligani, I.; Mignard, F.; Morando, B.; Perryman, M. A. C.

    1992-01-01

    The main features of the data analysis methods adopted by FAST in the calibration and processing of the Hipparcos data are discussed. The structure of the data reduction software is examined, and the actual processing and evaluation are presented. Attention is given to the first look task, the calibration task, data preparation, attitude determination, the great circle reduction, synthesis treatment, iterations, data management and command software, and follow-up and evaluation activities.

  15. Optimization of Fluidized Roasting Reduction of Low-Grade Pyrolusite Using Biogas Residual as Reductant

    NASA Astrophysics Data System (ADS)

    Cai, Z. L.; Feng, Y. L.; Li, H. R.; Liu, X. W.; Yang, Z. C.

    2012-11-01

    Research on the novel technology of fluidized roasting reduction of samples of low-grade pyrolusite using biogas residual as reductant has been conducted. According to the response surface design and the analysis of results, orthogonal experiments have been conducted on the major factors, and the effects on the manganese reduction efficiency have been studied. The maximum manganese reduction efficiency could be optimized to nearly 100%, when the mass ratio of biogas residual to pyrolusite was 0.16:1, the dosage of sulfuric acid was 1.6 times that of the stoichiometric amount, the roasting temperature was 680°C, and the roasting time was 70 min. The results in terms of manganese reduction efficiency of the actual experiments were close to those anticipated by modeling the experiments, indicating that the optimum conditions had a high reliability. Other low-grade pyrolusites such as Guangxi pyrolusite (China), Hunan pyrolusite (China), and Guizhou pyrolusite (China) were tested and all these materials responded well, giving nearly 100% manganese reduction efficiency.

  16. PbO2(s, plattnerite) reductive dissolution by natural organic matter: reductant and inhibitory subfractions.

    PubMed

    Shi, Zhi; Stone, Alan T

    2009-05-15

    Natural organic matter (NOM) is a diverse collection of molecules, each possessing its own reductant, complexant, and adsorption properties. Here, we are interested in the ability of NOM to bring about the reductive dissolution of Pb(IV)O2(s). Adding the coagulants FeCl3 or Al2(SO4)3 followed by membrane filtration is one way to remove a subset of NOM molecules from surface water samples. Another is to pass water samples through a granular activated carbon (GAC) column. Results from applying these treatments to Great Dismal Swamp water (DSW) and Nequasset Bog Water (NBW) can best be explained as follows: (i) GAC column treatment is more efficient at removing the NOM fraction most responsible for reductive dissolution. (ii) Coagulation/filtration, with either coagulant, is most efficient at removing a second, inhibitory fraction. Inhibition may arise from (i) adsorption at the mineral/water interface, which blocks approach of reductant molecules and (ii) a micelle-like aggregate nature, which provides hydrophobic pockets that capture reductantmolecules, again keeping them away from the mineral/water interface. Hypotheses regarding reductant and inhibitory fractions are further evaluated using representative low-molecular-weight compounds. Substituted hydroquinones are used as mimics of the reductant fraction, and malonic acid, quinic acid, trehalose, alginic acid, and polygalacturonic acid are used as mimics of the inhibitory fraction. PMID:19544861

  17. Simulation of dose reduction in tomosynthesis

    SciTech Connect

    Svalkvist, Angelica; Baath, Magnus

    2010-01-15

    Purpose: Methods for simulating dose reduction are valuable tools in the work of optimizing radiographic examinations. Using such methods, clinical images can be simulated to have been collected at other, lower, dose levels without the need of additional patient exposure. A recent technology introduced to healthcare that needs optimization is tomosynthesis, where a number of low-dose projection images collected at different angles is used to reconstruct section images of an imaged object. The aim of the present work was to develop a method of simulating dose reduction for digital radiographic systems, suitable for tomosynthesis. Methods: The developed method uses information about the noise power spectrum (NPS) at the original dose level and the simulated dose level to create a noise image that is added to the original image to produce an image that has the same noise properties as an image actually collected at the simulated dose level. As the detective quantum efficiency (DQE) of digital detectors operating at the low dose levels used for tomosynthesis may show a strong dependency on the dose level, it is important that a method for simulating dose reduction for tomosynthesis takes this dependency into account. By applying an experimentally determined relationship between pixel mean and pixel variance, variations in both dose and DQE in relevant dose ranges are taken into account. Results: The developed method was tested on a chest tomosynthesis system and was shown to produce NPS of simulated dose-reduced projection images that agreed well with the NPS of images actually collected at the simulated dose level. The simulated dose reduction method was also applied to tomosynthesis examinations of an anthropomorphic chest phantom, and the obtained noise in the reconstructed section images was very similar to that of an examination actually performed at the simulated dose level. Conclusions: In conclusion, the present article describes a method for simulating dose

  18. Size dependent reduction-oxidation-reduction behaviour of cobalt oxide nanocrystals

    NASA Astrophysics Data System (ADS)

    Sadasivan, Sajanikumari; Bellabarba, Ronan M.; Tooze, Robert P.

    2013-10-01

    Morphologically similar cobalt oxide nanoparticles (Co3O4) of four different sizes (3 nm, 6 nm, 11 nm and 29 nm) with narrow size distribution were prepared by subtle variation of synthesis conditions. These nanoparticles were used as model materials to understand the structural and morphological changes that occur to cobalt oxide during sequential reduction, oxidation and further re-reduction process as a function of the initial size of cobalt oxide. On reduction, spherical cobalt nanoparticles were obtained independent of the original size of cobalt oxide. In contrast, subsequent oxidation of the metal particles led to solid spheres, hollow spheres or core-shell structures depending on the size of the initial metal particle. Further re-reduction of the oxidized structures was also observed to be size dependent. The hollow oxide shells formed by the large particles (29 nm) fragmented into smaller particles on reduction, while the hollow shells of the medium sized particles (11 nm) did not re-disperse on further reduction. Similarly, no re-dispersion was observed in the case of the small particles (6 nm). This model study provides useful insights into the size dependent behavior of metal/metal oxide particles during oxidation/reduction. This has important implications in petrochemical industry where cobalt is used as a catalyst in the Fischer-Tropsch process.Morphologically similar cobalt oxide nanoparticles (Co3O4) of four different sizes (3 nm, 6 nm, 11 nm and 29 nm) with narrow size distribution were prepared by subtle variation of synthesis conditions. These nanoparticles were used as model materials to understand the structural and morphological changes that occur to cobalt oxide during sequential reduction, oxidation and further re-reduction process as a function of the initial size of cobalt oxide. On reduction, spherical cobalt nanoparticles were obtained independent of the original size of cobalt oxide. In contrast, subsequent oxidation of the metal

  19. Characterization of nickel laterite reduction from Pomalaa, Sulawesi Tenggara

    SciTech Connect

    Rhamdani, Ahmad Rizky; Petrus, Himawan T. B. M. Fahrurrozi, Moh.

    2015-12-29

    The effect of using different reductors in the reduction process of nickel laterite was investigated. In this work, the author conducted the reduction of nickel laterite ores by anthracite coal, lamtoro charcoal, and carbon raiser, in air and CO{sub 2} atmosphere, within the temperature ranged from 800°C and 1000°C. The results indicate that at higher temperatures, the reduction reactions proceed more complete. According to the X-ray powder diffraction (XRD) analysis, the type of carbon used greatly influence the rate of the reduction of nickel laterite. The order of reactivity is anthracite coal, lamtoro charcoal, and carbon raiser, respectively. The reduction atmospheric condition also greatly influences the reduction process. The reduction process in CO{sub 2} atmospheric condition gives a lot of significant decrease in hematite and magnetite presence, means that the reduction reactions proceed more complete compared to the reduction process in the air atmospheric condition.

  20. Characterization of nickel laterite reduction from Pomalaa, Sulawesi Tenggara

    NASA Astrophysics Data System (ADS)

    Rhamdani, Ahmad Rizky; Petrus, Himawan T. B. M.; Fahrurrozi, Moh.

    2015-12-01

    The effect of using different reductors in the reduction process of nickel laterite was investigated. In this work, the author conducted the reduction of nickel laterite ores by anthracite coal, lamtoro charcoal, and carbon raiser, in air and CO2 atmosphere, within the temperature ranged from 800°C and 1000°C. The results indicate that at higher temperatures, the reduction reactions proceed more complete. According to the X-ray powder diffraction (XRD) analysis, the type of carbon used greatly influence the rate of the reduction of nickel laterite. The order of reactivity is anthracite coal, lamtoro charcoal, and carbon raiser, respectively. The reduction atmospheric condition also greatly influences the reduction process. The reduction process in CO2 atmospheric condition gives a lot of significant decrease in hematite and magnetite presence, means that the reduction reactions proceed more complete compared to the reduction process in the air atmospheric condition.

  1. Breast Reduction versus Breast Reduction Plus Implants: A Comparative Study with Measurements and Outcomes

    PubMed Central

    2014-01-01

    Background: Breast reduction is well-known to provide an improvement in physical symptoms. However, measurements show that this procedure is less effective in restoring upper-pole fullness. Breast implants effectively augment the upper pole. This study was undertaken to determine the effectiveness and safety of this treatment combination. Methods: This retrospective study consists of 3 parts: (1) a clinical study, (2) breast measurements, and (3) an outcome study. Eighty consecutive women undergoing breast reduction (n = 56) or breast reduction plus implants (n = 24) were evaluated. All breast implants were inserted submuscularly. All patients were treated with the same vertical reduction technique, using a medially based pedicle and intraoperative nipple positioning. Measurements were compared between preoperative photographs and photographs taken at least 3 months after surgery (n = 51). Patient surveys (n= 56) were evaluated. Results: There was no significant difference in complication or reoperation rates between groups. Both procedures elevated the breast mound and lower-pole level and increased the breast parenchymal ratio (upper-pole area/lower-pole area). Breast implants significantly increased upper-pole projection (P < 0.01). All surveyed patients who had simultaneous implants reported that they were pleased with their decision. Physical symptoms were reduced in both groups. Patient satisfaction was 92.5% for breast reduction and 93.8% for breast reduction plus implants. Both groups reported an improvement in quality of life. Conclusions: Vertical breast reduction with a medial pedicle may be combined safely and effectively with breast implants in patients who desire upper-pole fullness. PMID:25587515

  2. Microbial Mn(IV) reduction requires an initial one-electron reductive solubilization step

    NASA Astrophysics Data System (ADS)

    Lin, Hui; Szeinbaum, Nadia H.; DiChristina, Thomas J.; Taillefert, Martial

    2012-12-01

    Mn(IV) and Mn(II) are the most stable and prevalent forms of manganese in natural environments. The occurrence of Mn(III) in minerals and the detection of soluble Mn(III) in natural waters, however, suggest that Mn(III) is an intermediate in both the oxidation of Mn(II) and the reduction of Mn(IV). Mn(III) has recently been proposed as an intermediate during the oxidation of Mn(II) by Mn-oxidizing bacteria but has never been considered as an intermediate during the bio-reduction of Mn(IV). Here we show for the first time that microbial Mn(IV) reduction proceeds step-wise via two successive one-electron transfer reactions with production of soluble Mn(III) as transient intermediate. Incubations with mutant strains demonstrate that the reduction of both solid Mn(IV) and soluble Mn(III) occurs at the outer membrane of the cell. In addition, pseudo-first order rate constants obtained from these incubations indicate that Mn(IV) respiration involves only one of the two potential terminal reductases (c-type cytochrome MtrC and OmcA) involved in Fe(III) respiration. More importantly, only the second electron transfer step is coupled to production of dissolved inorganic carbon, suggesting that the first electron transfer reaction is a reductive solubilization step that increases Mn bioavailability. These findings oppose the long-standing paradigm that microbial Mn(IV) reduction proceeds via a single two-electron transfer reaction coupled to organic carbon oxidation, and suggest that diagenetic models should be revised to correctly account for the impact of manganese reduction in the global carbon cycle.

  3. Volume reduction in routine cord blood banking.

    PubMed

    Solves, Pilar; Mirabet, Vicente; Roig, Roberto

    2010-12-01

    Umbilical cord blood (UCB) is an alternative source of hematopoietic progenitors for transplantation in the treatment of haematological malignancies, marrow failure, immunodeficiencies, hemoglobinopathies and inherited metabolic diseases. It has greatly contributed to increase the feasibility to transplantation for many patients in need. To date, more than 20,000 UCB transplants have been performed on children and adults, and more than 400,000 UCB units are available in more than 50 public CB banks. One of the most important objectives of banks is to cryopreserve and store high quality UCB units. Volume reduction is a usual process in cord blood banking that has some advantages as reducing the storage space and the DMSO quantity in final product. Volume reduction methodology must guarantee high cell recovery and red blood cell (RBC) depletion by reducing the UCB units to a standard volume. Hydroxyethyl starch (HES) sedimentation was the first method developed for this purpose by the New York Cord Blood Bank and implemented in many banks worldwide. The semi-automated top and bottom system, usually used for blood fractionation was further developed to simplify and short the process. Later, automatic devices as SEPAX and AXP have been developed in last years specifically for UCB volume reduction purpose. This review critically analyses the advantages and disadvantages of the different procedures. All of them have been used in Valencia Cord Blood Bank along 10 years. In general, automatic devices are preferred because of compliance with cGTP, closed systems, higher reproducibility and less influence of technician. PMID:20528760

  4. Individual Reactions of Permanganate & Various Reductants

    SciTech Connect

    Gauger, Amber M.; Hallen, Richard T. )

    2000-11-01

    Tank waste on the Hanford Site contains radioactive elements that need to be removed from solution prior to disposal. One effective way to do this is to precipitate the radioactive elements with manganese solids, produced by permanganate oxidation. When added to tank waste, the permanganate, Mn(VII), reacts quickly producing manganese (IV) dioxide precipitate. Because of the speed of reaction it is difficult to tell what exactly is happening. Individual reactions using non-radioactive reductants found in the tanks were done to determine reaction kinetics, what permanganate was reduced to, and what oxidation products were formed. In this project sodium formate, sodium nitrite, glycolic acid, glycine, and sodium oxalate were studied using various concentrations of reductant in alkaline sodium hydroxide solutions. It was determined that formate reacted the quickest, followed by glycine and glycolic acid. Oxalate and nitrite did not appear to react with the permanganate solutions. The formate reactions quickly reduced permanganate, Mn(VII), to manganate, Mn(VI), and then to manganese (IV) dioxide. These reactions oxidized formate to carbonate and water. The glycolic acid was oxidized slower producing oxalate, water, and manganate, which would disproportionate to permanganate and manganese (IV) dioxide solids. The rate at which Mn(VI) disproportionates is usually slower than the rate at which Mn(VII) is reduced to Mn(VI), however in this case the rates were about equal. The glycine reactions formed some ammonia in solution, oxalate, and water. They reacted similar to the glycolic acid reactions, producing manganese dioxide precipitate before the solution turned totally green from Mn(VI). The formate reactions consumed one mole of hydroxide for every 3 moles of formate, while the glycolic acid and glycine reactions consumed 7 moles of hydroxide for every 3 moles of reductant. These reactions should help to determine the majority of products found in mixtures of solutions.

  5. Microbial Uranium Immobilization Independent of Nitrate Reduction

    SciTech Connect

    Madden, Andrew; Smith, April; Balkwill, Dr. David; Fagan, Lisa Anne; Phelps, Tommy Joe

    2007-01-01

    At many uranium processing and handling facilities, including sites in the U.S. Department of Energy (DOE) complex, high levels of nitrate are present as co-contamination with uranium in groundwater. The daunting prospect of complete nitrate removal prior to the reduction of uranium provides a strong incentive to explore bioremediation strategies that allow for uranium bioreduction and stabilization in the presence of nitrate. Typical in-situ strategies involving the stimulation of metal-reducing bacteria are hindered by low pH environments at this study site and require that the persistent nitrate must first and continuously be removed or transformed prior to uranium being a preferred electron acceptor. This project investigates the possibility of stimulating nitrate-indifferent, pH-tolerant microorganisms to achieve bioreduction of U(VI) despite nitrate persistence. Successful enrichments from U-contaminated sediments demonstrated nearly complete reduction of uranium with very little loss of nitrate from pH 4.9-5.6 using methanol or glycerol as a carbon source. Higher pH enrichments also demonstrated similar U reduction capacity with 5-30% nitrate loss within one week. Bacterial 16S rRNA genes were amplified from uranium-reducing enrichments (pH 5.7-6.7) and sequenced. Phylogenetic analyses classified the clone sequences into four distinct clusters. Data from sequencing and T-RFLP profiles indicated that the majority of the microorganisms stimulated by these enrichment conditions consisted of low G+C Gram-positive bacteria most closely related to Clostridium and Clostridium-like organisms. This research demonstrates that the stimulation of a natural microbial community to immobilize U through bioreduction is possible without the removal of nitrate.

  6. Reduction in Defect Content of ODS Alloys

    SciTech Connect

    Ritherdon, J

    2003-11-17

    The work detailed within this report is a continuation of earlier work carried out under contract number 1DX-SY382V. The earlier work comprises a literature review of the sources and types of defects found principally in Fe-based ODS alloys as well as experimental work designed to identify defects in the prototype ODS-Fe{sub 3}Al alloy, deduce their origins and to recommend methods of defect reduction. The present work is an extension of the experimental work already reported and concentrates on means of reduction of defects already identified rather than the search for new defect types. This report also includes work regarding the manipulation of grain structures via deformation processing and further results gathered during powder separation trials involving the separation of different metallic powders in terms of their differing densities. The scope and objectives of the present work were laid out in the technical proposal ''Reduction in Defect Content in ODS Alloys-IV''. All the work proposed in the ''Statement of Work'' section of the technical proposal has been carried out except for some of that dependent on the acquisition of materials from other sources. However, wherever omissions from the ''Plan of Action'' detailed in the ''Statement of Work'' have occurred due to lack of suitable materials, other related experimental work has been devised to fill the gaps where possible. All work extra to the ''Statement of Work'' falls within the context of an ODS-Fe{sub 3}Al alloy of improved overall quality and potential creep performance in the consolidated form. The outturn of the experimental work performed is reported in the following sections.

  7. Visualizing harm reduction: Methodological and ethical considerations.

    PubMed

    Switzer, S; Guta, A; de Prinse, K; Chan Carusone, S; Strike, C

    2015-05-01

    The use of visual methods is becoming increasingly common and accepted in health research. This paper explores the opportunities and constraints of using photo-based methods in the context of a community-based participatory research study on how to engage people living with HIV in conversations about a hospital's recently introduced harm reduction policy. Using a blended approach of photovoice and photo-elicited interviews, we provided participants (n = 16) with cameras and asked them to take a series of photos that "show how you feel about or have experienced harm reduction as a Casey House client." We reflect on methodological insights from the study to think through the process of doing photo-based work on a stigmatized topic in a small hospital setting by foregrounding: 1) how the act of taking photos assisted participants in visualizing connections between space, harm reduction, and substance use; 2) expectations of participation and navigating daily health realities; and 3) issues of confidentiality, anonymity and stigma in clinical settings. These reflections provide a case study on the importance of critically examining the process of engaging with photo-based methods. We conclude the paper by re-thinking issues of context and photo-based methods. Rather than viewing context as a neutral backdrop to apply a method, context should be viewed as an active force in shaping what can or cannot be done or produced within the space. Photo-based methods may offer an effective community-engagement strategy but may require modification for use in a clinical setting when working on a stigmatized topic with individuals with complex health care needs. Given the potential of visual methods as a community engagement strategy, research teams are advised to understand the entire process as a data collection opportunity so that these methods can be further explored in a variety of contexts. PMID:25841098

  8. Noise reduction of a table saw

    NASA Astrophysics Data System (ADS)

    Carlson, John

    2002-05-01

    The National Institute for Occupational Safety and Health (NIOSH) is sponsoring a design project to address the noise levels that commonly exist at construction worksites. Through engineering control, the problem of noise emission from a table saw will be addressed. The noise emitting sources will be pinpointed using a sound pressure level meter. With this knowledge, the next step will be to reduce the sound pressure levels at the noise sources. This will be done by using noise reduction techniques such as insulation, and vibration dampening. The goal is to reduce the noise emission to a level between 85 and 90 dB(A).

  9. Analysis of potential helicopter vibration reduction concepts

    NASA Technical Reports Server (NTRS)

    Landgrebe, A. J.; Davis, M. W.

    1985-01-01

    Results of analytical investigations to develop, understand, and evaluate potential helicopter vibration reduction concepts are presented in the following areas: identification of the fundamental sources of vibratory loads, blade design for low vibration, application of design optimization techniques, active higher harmonic control, blade appended aeromechanical devices, and the prediction of vibratory airloads. Primary sources of vibration are identified for a selected four-bladed articulated rotor operating in high speed level flight. The application of analytical design procedures and optimization techniques are shown to have the potential for establishing reduced vibration blade designs through variations in blade mass and stiffness distributions, and chordwise center-of-gravity location.

  10. Reductive dehalogenation of bromoform in aqueous solution.

    PubMed Central

    Betterton, E A; Arnold, R G; Kuhler, R J; Santo, G A

    1995-01-01

    The hybrid semiconducter-macrocycle catalyst TiO2-cobalt phthalocyanine promotes the solar photolysis of aqueous bromoform under anaerobic conditions. The major decomposition products are dibromoethane and HBr. Bromomethane and methane were produced only after prolonged photolysis (30 hr). Acetone, derived from added 2-propanol, was the only observed oxidation product. Preliminary experiments showed that electrolytic reduction of aqueous carbon tetrachloride at a vitamin B12-modified silver electrode produced the expected lower homologues but with surprisingly high yields of methane. PMID:8565919

  11. Natural disaster reduction and global change

    SciTech Connect

    Bruce, J.P.

    1994-10-01

    There are three types of global change that affect human and economic losses due to natural disasters. The three kinds of changes are: (1) increasing economic development, especially along coastlines, in flood plains, and other hazard-prone areas; (2) changes in land surfaces and vegetation; and (3) variability and change in frequency and severity of natural hazards. Any program for reduction of disaster losses must take these factors into account, and trends in losses are due to these changes. 17 refs., 2 tabs.

  12. JASMINE design and method of data reduction

    NASA Astrophysics Data System (ADS)

    Yamada, Yoshiyuki; Gouda, Naoteru; Yano, Taihei; Kobayashi, Yukiyasu; Niwa, Yoshito

    2008-07-01

    Japan Astrometry Satellite Mission for Infrared Exploration (JASMINE) aims to construct a map of the Galactic bulge with 10 μ arc sec accuracy. We use z-band CCD for avoiding dust absorption, and observe about 10 × 20 degrees area around the Galactic bulge region. Because the stellar density is very high, each FOVs can be combined with high accuracy. With 5 years observation, we will construct 10 μ arc sec accurate map. In this poster, I will show the observation strategy, design of JASMINE hardware, reduction scheme, and error budget. We also construct simulation software named JASMINE Simulator. We also show the simulation results and design of software.

  13. Differential geometry, Palatini gravity and reduction

    SciTech Connect

    Capriotti, S.

    2014-01-15

    The present article deals with a formulation of the so called (vacuum) Palatini gravity as a general variational principle. In order to accomplish this goal, some geometrical tools related to the geometry of the bundle of connections of the frame bundle LM are used. A generalization of Lagrange-Poincaré reduction scheme to these types of variational problems allows us to relate it with the Einstein-Hilbert variational problem. Relations with some other variational problems for gravity found in the literature are discussed.

  14. Telescope loading: A problem reduction approach

    NASA Technical Reports Server (NTRS)

    Bresina, John L.

    1994-01-01

    This paper presents a problem reduction approach to telescope loading. To study time-varying celestial behavior, astronomers submit periodic observation campaigns which involve a sequence of observations at a given sampling frequency over months or years. The loader's task is to generate an assignment of observation tasks to each night in the time window such that resource demand does not exceed resource capacity and such that the observations usefully contribute to the campaigns' scientific purposes, in a manner that is fair to all participating astronomers.

  15. A study of helicopter interior noise reduction

    NASA Technical Reports Server (NTRS)

    Howlett, J. T.; Clevenson, S. A.

    1975-01-01

    The interior noise levels of existing helicopters are discussed along with an ongoing experimental program directed towards reducing these levels. Results of several noise and vibration measurements on Langley Research Center's Civil Helicopter Research Aircraft are presented, including measurements taken before and after installation of an acoustically-treated cabin. The predominant noise source in this helicopter is the first stage planetary gear-clash in the main gear box, both before and after installation of the acoustically treated cabin. Noise reductions of up to 20 db in some octave bands may be required in order to obtain interior noise levels comparable to commercial jet transports.

  16. Reductive opening of carbohydrate phenylsulfonylethylidene (PSE) acetals.

    PubMed

    Chéry, Florence; Cabianca, Elena; Tatibouët, Arnaud; De Lucchi, Ottorino; Lindhorst, Thisbe K; Rollin, Patrick

    2015-11-19

    The phenylsulfonylethylidene (PSE) acetal is a relatively new protecting group in carbohydrate chemistry. However, carbohydrate-derived phenylsulfonylethylidene (PSE) acetals show a different behavior in reductive desulfonylation than simple symmetrical acetals. Here we have investigated various SET-type reaction conditions in order to open PSE acetals regioselectively and to produce chiral ω-hydroxyethenyl ethers. Whereas sodium amalgam leads to a mixture of regioisomeric vinyl ethers besides the ethylidene acetal, samarium iodide is suited for regioselective ring opening. This is shown with seven different carbohydrate PSE acetals, both of the 1,3-dioxane and the 1,3-dioxolane type. PMID:26469209

  17. Preoperative breast marking in reduction mammaplasty.

    PubMed

    Gasperoni, C; Salgarello, M

    1987-10-01

    A simple method of preoperative marking for reduction mammaplasty is described. This method may be used in macromastias when the technique chosen implies a postoperative scar with the shape of an inverted T. The marking sequence follows standard steps, but the drawing is always different because it is a consequence of the shape of the breast. This marking method reduces the chance of making mistakes due to excessive personal evaluations or to the use of standard drawing patterns that may be not suitable for all breast shapes. PMID:3688776

  18. Incomplete Dirac reduction of constrained Hamiltonian systems

    SciTech Connect

    Chandre, C.

    2015-10-15

    First-class constraints constitute a potential obstacle to the computation of a Poisson bracket in Dirac’s theory of constrained Hamiltonian systems. Using the pseudoinverse instead of the inverse of the matrix defined by the Poisson brackets between the constraints, we show that a Dirac–Poisson bracket can be constructed, even if it corresponds to an incomplete reduction of the original Hamiltonian system. The uniqueness of Dirac brackets is discussed. The relevance of this procedure for infinite dimensional Hamiltonian systems is exemplified.

  19. Model reduction for discrete bilinear systems

    NASA Technical Reports Server (NTRS)

    King, A. M.; Skelton, R. E.

    1987-01-01

    A model reduction method for discrete bilinear systems is developed which matches q sets of Volterra and covariance parameters. These parameters are shown to represent both deterministic and stochastic attributes of the discrete bilinear system. A reduced order model which matches these q sets of parameters is defined to be a q-Volterra covariance equivalent realization (q-Volterra COVER). An algorithm is presented which constructs a class of q-Volterra COVERs parameterized by solutions to a Hermitian, quadratic, matrix equation. The algorithm is applied to a bilinear model of a robot manipulator.

  20. PRODUCTION OF URANIUM METAL BY CARBON REDUCTION

    DOEpatents

    Holden, R.B.; Powers, R.M.; Blaber, O.J.

    1959-09-22

    The preparation of uranium metal by the carbon reduction of an oxide of uranium is described. In a preferred embodiment of the invention a charge composed of carbon and uranium oxide is heated to a solid mass after which it is further heated under vacuum to a temperature of about 2000 deg C to produce a fused uranium metal. Slowly ccoling the fused mass produces a dendritic structure of uranium carbide in uranium metal. Reacting the solidified charge with deionized water hydrolyzes the uranium carbide to finely divide uranium dioxide which can be separated from the coarser uranium metal by ordinary filtration methods.

  1. Fluorescence quenching of flavins by reductive agents

    NASA Astrophysics Data System (ADS)

    Penzkofer, A.; Bansal, A. K.; Song, S.-H.; Dick, B.

    2007-07-01

    The fluorescence behaviour of the flavins riboflavin, flavin mononucleotide (FMN), flavin adenine dinucleotide (FAD), and lumiflavin in aqueous solution at pH 8 in the presence of the reducing agents β-mercaptoethanol (β-ME), dithiothreitol (DTT), and sodium nitrite (NaNO 2) is studied under aerobic conditions. The fluorescence quantum yields and fluorescence lifetimes are determined as a function of the reducing agent concentration. For all three reducing agents diffusion controlled dynamic fluorescence quenching is observed which is thought to be due to photo-induced reductive electron transfer. For DTT additionally static fluorescence quenching occurs.

  2. Selective catalyst reduction light-off strategy

    DOEpatents

    Gonze, Eugene V [Pinckney, MI

    2011-10-18

    An emissions control system includes a temperature determination module and an emissions control module. The temperature determination module determines a first temperature of a heater element of a diesel particulate filter (DPF) assembly in an exhaust system and determines a second temperature of a catalyst of the DPF assembly. The emissions control module selectively activates the heater element, selectively initiates a predefined combustion process in an engine based upon the first temperature, and selectively starts a reductant injection process based upon the second temperature.

  3. Landfill reduction experience in The Netherlands

    SciTech Connect

    Scharff, Heijo

    2014-11-15

    Highlights: • ‘Zero waste’ initiatives never consider risks, side effects or experience of achieved low levels of landfill. • This paper provides insight into what works and what not. • Where strong gradients in regulations and tax occur between countries, waste will find its way to landfills across borders. • Strong landfill reduction can create a fierce competition over the remaining waste to be landfilled resulting in losses. • At some point a public organisation should take responsibility for the operation of a ‘safety net’ in waste management. - Abstract: Modern waste legislation aims at resource efficiency and landfill reduction. This paper analyses more than 20 years of landfill reduction in the Netherlands. The combination of landfill regulations, landfill tax and landfill bans resulted in the desired landfill reduction, but also had negative effects. A fierce competition developed over the remaining waste to be landfilled. In 2013 the Dutch landfill industry generated €40 million of annual revenue, had €58 million annual costs and therefore incurred an annual loss of €18 million. It is not an attractive option to prematurely end business. There is a risk that Dutch landfill operators will not be able to fulfil the financial obligations for closure and aftercare. Contrary to the polluter pays principle the burden may end up with society. EU regulations prohibiting export of waste for disposal are in place. Strong differentials in landfill tax rate between nations have nevertheless resulted in transboundary shipment of waste and in non-compliance with the self-sufficiency and proximity principles. During the transformation from a disposal society to a recycling society, it is important to carefully plan required capacity and to guide the reorganisation of the landfill sector. At some point, it is no longer profitable to provide landfill services. It may be necessary for public organisations or the state to take responsibility for the

  4. Cost-reduction potential in LMFBR design

    SciTech Connect

    Chang, Y.I.; Till, C.E.

    1983-01-01

    LWR capital costs have escalated continuously over the years to the point where today its economics represent a bar to further LWR deployment in the US. High initial costs and the promise of a similar pattern of cost escalation in succeeding years for the LMFBR would effectively stop LMFBR deployment in this country before it could even begin. LWR cost escalation in the main can be traced to large increases in both amounts and unit costs of construction materials and to greatly lengthened construction times. Innovative approaches to LMFBR design are now being pursued that show promise for substantial cost reductions particularly in those areas that have contributed most to LWR cost increases.

  5. Wing Leading Edge Concepts for Noise Reduction

    NASA Technical Reports Server (NTRS)

    Shmilovich, Arvin; Yadlin, Yoram; Pitera, David M.

    2010-01-01

    This study focuses on the development of wing leading edge concepts for noise reduction during high-lift operations, without compromising landing stall speeds, stall characteristics or cruise performance. High-lift geometries, which can be obtained by conventional mechanical systems or morphing structures have been considered. A systematic aerodynamic analysis procedure was used to arrive at several promising configurations. The aerodynamic design of new wing leading edge shapes is obtained from a robust Computational Fluid Dynamics procedure. Acoustic benefits are qualitatively established through the evaluation of the computed flow fields.

  6. Human health effects of ozone reduction

    NASA Technical Reports Server (NTRS)

    1975-01-01

    Modification of the stratosphere, such as a reduction in its equilibrium ozone content, could produce direct and indirect effects on human health. The direct hazard to humans would be caused by an increase in the cumulative amount of UV radiation reaching the earth's surface in the range of 285 to 340 nm, encompassing the UV-B or erythemal wavelength region of 280 to 320 nm. Exposing the susceptible human population to an increased total UV dosage of shorter wavelengths could increase skin cancer incidence. Although effects would be delayed by decades, for each 1% decrease in ozone the expected increase in skin cancer incidence would be on the order of 2%.

  7. NASA research on viscous drag reduction

    NASA Technical Reports Server (NTRS)

    Petersen, R. H.; Maddalon, D. V.

    1982-01-01

    Research on natural laminar flow, laminar flow control by suction, and turbulent drag reduction is discussed. Preliminary results suggest that a significant amount of natural laminar flow can be achieved on small, straight wing airplanes. On larger, swept wing aircraft, laminar flow control by distributed suction is expected to result in significant fuel savings. The area over which laminar flow control is applied depends on tradeoffs involving structural complexity, maintenance, and cost. Several methods of reducing turbulent skin friction by altering the turbulence structure itself have shown promise in exploratory testing. The status of these technologies and the benefits of applying them to future aircraft are reviewed.

  8. Enteric Viral Surrogate Reduction by Chitosan.

    PubMed

    Davis, Robert; Zivanovic, Svetlana; Davidson, P Michael; D'Souza, Doris H

    2015-12-01

    Enteric viruses are a major problem in the food industry, especially as human noroviruses are the leading cause of nonbacterial gastroenteritis. Chitosan is known to be effective against some enteric viral surrogates, but more detailed studies are needed to determine the precise application variables. The main objective of this work was to determine the effect of increasing chitosan concentration (0.7-1.5% w/v) on the cultivable enteric viral surrogates, feline calicivirus (FCV-F9), murine norovirus (MNV-1), and bacteriophages (MS2 and phiX174) at 37 °C. Two chitosans (53 and 222 kDa) were dissolved in water (53 kDa) or 1% acetic acid (222 KDa) at 0.7-1.5%, and were then mixed with each virus to obtain a titer of ~5 log plaque-forming units (PFU)/mL. These mixtures were incubated for 3 h at 37 °C. Controls included untreated viruses in phosphate-buffered saline and viruses were enumerated by plaque assays. The 53 kDa chitosan at the concentrations tested reduced FCV-F9, MNV-1, MS2, and phi X174 by 2.6-2.9, 0.1-0.4, 2.6-2.8, and 0.7-0.9 log PFU/mL, respectively, while reduction by 222 kDa chitosan was 2.2-2.4, 0.8-1.0, 2.6-5.2, and 0.5-0.8 log PFU/mL, respectively. The 222 kDa chitosan at 1 and 0.7% w/v in acetic acid (pH 4.5) caused the greatest reductions of MS2 by 5.2 logs and 2.6 logs, respectively. Overall, chitosan treatments showed the greatest reduction of MS2, followed by FCV-F9, phi X174, and MNV-1. These two chitosans may contribute to the reduction of enteric viruses at the concentrations tested but would require use of other hurdles to eliminate food borne viruses. PMID:26162243

  9. Particle size reduction of propellants by cryocycling

    SciTech Connect

    Whinnery, L.; Griffiths, S.; Lipkin, J.

    1995-05-01

    Repeated exposure of a propellant to liquid nitrogen causes thermal stress gradients within the material resulting in cracking and particle size reduction. This process is termed cryocycling. The authors conducted a feasibility study, combining experiments on both inert and live propellants with three modeling approaches. These models provided optimized cycle times, predicted ultimate particle size, and allowed crack behavior to be explored. Process safety evaluations conducted separately indicated that cryocycling does not increase the sensitivity of the propellants examined. The results of this study suggest that cryocycling is a promising technology for the demilitarization of tactical rocket motors.

  10. Laser Plasma instability reduction by coherence disruption

    SciTech Connect

    Kruer, W l; Amendt, P A; Meezan, N; Suter, L J

    2006-04-19

    The saturation levels of stimulated scattering of intense laser light in plasmas and techniques to reduce these levels are of great interest. A simple model is used to highlight the dependence of the reflectivity on the coherence length for the density fluctuations producing the scattering. Sometimes the coherence lengths can be determined nonlinearly. For NIF hohlraum plasmas, a reduction in the coherence lengths might be engineered in several ways. Finally, electron trapping in ion sound waves is briefly examined as a potentially important effect for the saturation of stimulated Brillouin scattering.

  11. Potential reduction of DSN uplink energy cost

    NASA Technical Reports Server (NTRS)

    Dolinsky, S.; Degroot, N. F.

    1982-01-01

    DSN Earth stations typically transmit more power than that required to meet minimum specifications for uplink performance. Energy and cost savings that could result from matching the uplink power to the amount required for specified performance are studied. The Galileo mission was selected as a case study. Although substantial reduction in transmitted energy is possible, potential savings in source energy (oil or electricity) savings are much less. This is because of the rising inefficiency in power conversion and radio frequency power generation that accompanies reduced power output.

  12. Drug use and harm reduction in Afghanistan

    PubMed Central

    Todd, Catherine S; Safi, Naqibullah; Strathdee, Steffanie A

    2005-01-01

    Opium has been cultivated in Afghanistan since 1100 A.D., although production has steadily increased since 1979. Currently, Afghanistan produces three-quarters of the global opium supply, with injection drug use and HIV currently following the opium trade route through Central Asia. Although systematic studies are lacking, heroin use appears to be on the rise in Afghanistan. The purpose of this paper is to briefly provide historical background and current statistics for drug production and use in Afghanistan, to discuss the new government's policies towards problem drug use and available rehabilitation programs, and to assess Afghan harm reduction needs with consideration of regional trends. PMID:16146577

  13. Psychoactive substances: Position statement on harm reduction.

    PubMed

    Stein, Dan Joseph; Manyedi For The Executive Committee Of The Central Drug Authority, Eva

    2016-09-01

    Psychoactive substances are subject to several international and national conventions and laws that have emphasised the importance of the 'war on drugs' and supply reduction. At the same time, it is increasingly clear that evidence-based, balanced policies are needed, which address the important differences between alcohol, tobacco, marijuana and other psychoactive substances or drugs. The Prevention of and Treatment for Substance Abuse Act 70 of 2008 speaks to the National Drug Master Plan, which emphasises a range of strategies for addressing the excessive use of alcohol, tobacco, marijuana and other psychoactive substances. PMID:27601125

  14. Management of Asymmetry After Breast Reduction.

    PubMed

    Garcia, Onelio

    2016-04-01

    Breast reduction surgery has achieved one of the highest patient satisfaction rates among plastic surgery procedures. Most of the complications encountered are usually minor and related to wound healing. Revision surgery to address these problems is common and usually consists of scar revisions. Postoperative breast asymmetry of a mild degree is also common; however, postoperative asymmetry severe enough to warrant surgical revision is a rare event, occurring in less than 1% of cases. Postmammaplasty revision surgery needs to be individualized. The asymmetry could be the result of nipple malposition or it could consist of a volume or shape discrepancy between the breast mounds. PMID:27012796

  15. Process simulation of aluminum reduction cells

    SciTech Connect

    Tabsh, I.; Dupuis, M.; Gomes, A.

    1996-10-01

    A program was developed to model the dynamic behavior of an aluminum reduction cell. The program simulates the physical process by solving the heat and mass balance equations that characterize the behavior of eleven chemical species in the system. It also models operational events (such as metal tapping, anode change, etc.) and the process control logic including various alumina feeding policies and anode effect quenching. The program is a PC based Windows{reg_sign} application that takes full advantage of the Windows user interface. This paper describes the implementation of the process model and the control logic. Various results using the simulation are compared to measured data.

  16. Carbothermic reduction with parallel heat sources

    DOEpatents

    Troup, Robert L.; Stevenson, David T.

    1984-12-04

    Disclosed are apparatus and method of carbothermic direct reduction for producing an aluminum alloy from a raw material mix including aluminum oxide, silicon oxide, and carbon wherein parallel heat sources are provided by a combustion heat source and by an electrical heat source at essentially the same position in the reactor, e.g., such as at the same horizontal level in the path of a gravity-fed moving bed in a vertical reactor. The present invention includes providing at least 79% of the heat energy required in the process by the electrical heat source.

  17. The SCUBA-2 Data Reduction Cookbook

    NASA Astrophysics Data System (ADS)

    Thomas, Holly S.; Currie, Malcolm J.

    This cookbook provides a short introduction to Starlink facilities, especially SMURF, the Sub-Millimetre User Reduction Facility, for reducing, displaying, and calibrating SCUBA-2 data. It describes some of the data artefacts present in SCUBA-2 time-series and methods to mitigate them. In particular, this cookbook illustrates the various steps required to reduce the data; and gives an overview of the Dynamic Iterative Map-Maker, which carries out all of these steps using a single command controlled by a configuration file. Specialised configuration files are presented.

  18. Landscape planning for agricultural nonpoint source pollution reduction III: Assessing phosphorus and sediment reduction potential

    USGS Publications Warehouse

    Diebel, M.W.; Maxted, J.T.; Robertson, D.M.; Han, S.; Vander Zanden, M. J.

    2009-01-01

    Riparian buffers have the potential to improve stream water quality in agricultural landscapes. This potential may vary in response to landscape characteristics such as soils, topography, land use, and human activities, including legacies of historical land management. We built a predictive model to estimate the sediment and phosphorus load reduction that should be achievable following the implementation of riparian buffers; then we estimated load reduction potential for a set of 1598 watersheds (average 54 km2) in Wisconsin. Our results indicate that land cover is generally the most important driver of constituent loads in Wisconsin streams, but its influence varies among pollutants and according to the scale at which it is measured. Physiographic (drainage density) variation also influenced sediment and phosphorus loads. The effect of historical land use on present-day channel erosion and variation in soil texture are the most important sources of phosphorus and sediment that riparian buffers cannot attenuate. However, in most watersheds, a large proportion (approximately 70%) of these pollutants can be eliminated from streams with buffers. Cumulative frequency distributions of load reduction potential indicate that targeting pollution reduction in the highest 10% of Wisconsin watersheds would reduce total phosphorus and sediment loads in the entire state by approximately 20%. These results support our approach of geographically targeting nonpoint source pollution reduction at multiple scales, including the watershed scale. ?? 2008 Springer Science+Business Media, LLC.

  19. Reduction of iron-oxide-carbon composites: part III. Shrinkage of composite pellets during reduction

    SciTech Connect

    Halder, S.; Fruehan, R.J.

    2008-12-15

    This article involves the evaluation of the volume change of iron-oxide-carbon composite pellets and its implications on reduction kinetics under conditions prevalent in a rotary hearth furnace (RHF) that were simulated in the laboratory. The pellets, in general, were found to shrink considerably during the reduction due to the loss of carbon and oxygen from the system, sintering of the iron-oxide, and formation of a molten slag phase at localized regions inside the pellets due to the presence of binder and coal/wood-charcoal ash at the reduction temperatures. One of the shortcomings of the RHF ironmaking process has been the inability to use multiple layers of composite pellets because of the impediment in heat transport to the lower layers of a multilayer bed. However, pellet shrinkage was found to have a strong effect on the reduction kinetics by virtue of enhancing the external heat transport to the lower layers. The volume change of the different kinds of composite pellets was studied as a function of reduction temperature and time. The estimation of the change in the amount of external heat transport with varying pellet sizes for a particular layer of a multilayer bed was obtained by conducting heat-transfer tests using inert low-carbon steel spheres. It was found that if the pellets of the top layer of the bed shrink by 30 pct, the external heat transfer to the second layer increases by nearly 6 times.

  20. Prospects for a nicotine-reduction strategy in the cigarette endgame: Alternative tobacco harm reduction scenarios.

    PubMed

    Kozlowski, Lynn T

    2015-06-01

    Some major national and international tobacco control organisations favour mandating a reduction in nicotine content of cigarettes to non-addictive levels as a tobacco control tool. Reducing nicotine content, it is argued, will make tobacco smoking less attractive. The 2009 U.S. Food and Drug Administration's regulation of cigarettes appears to have the power to reduce nicotine to non-addictive levels provided it is not taken to zero. A consideration of the U.S. context, however, raises doubts about (a) whether this will ever be practicable and (b), if practicable, how long it will take to implement. Current versions of the nicotine-reducing strategy propose the systematic, incentivised use of less harmful nicotine/tobacco products as elements of the mandatory cigarette nicotine-reduction strategy. Time will tell if and when mandatory nicotine reduction in tobacco cigarettes will occur and what impact it might have on smoking prevalence. The question posed here is "Why wait?" Resources used in implementing reduction in nicotine content have an opportunity cost. In the meantime, nicotine-maintaining harm reduction strategies can have nearer term effects on tobacco use as an individual and a public health issue. PMID:25795345

  1. Reduction of Iron-Oxide-Carbon Composites: Part III. Shrinkage of Composite Pellets during Reduction

    NASA Astrophysics Data System (ADS)

    Halder, S.; Fruehan, R. J.

    2008-12-01

    This article involves the evaluation of the volume change of iron-oxide-carbon composite pellets and its implications on reduction kinetics under conditions prevalent in a rotary hearth furnace (RHF) that were simulated in the laboratory. The pellets, in general, were found to shrink considerably during the reduction due to the loss of carbon and oxygen from the system, sintering of the iron-oxide, and formation of a molten slag phase at localized regions inside the pellets due to the presence of binder and coal/wood-charcoal ash at the reduction temperatures. One of the shortcomings of the RHF ironmaking process has been the inability to use multiple layers of composite pellets because of the impediment in heat transport to the lower layers of a multilayer bed. However, pellet shrinkage was found to have a strong effect on the reduction kinetics by virtue of enhancing the external heat transport to the lower layers. The volume change of the different kinds of composite pellets was studied as a function of reduction temperature and time. The estimation of the change in the amount of external heat transport with varying pellet sizes for a particular layer of a multilayer bed was obtained by conducting heat-transfer tests using inert low-carbon steel spheres. It was found that if the pellets of the top layer of the bed shrink by 30 pct, the external heat transfer to the second layer increases by nearly 6 times.

  2. Effects of reduction temperature on copper nanowires growth by thermal reduction of copper oxide nanowires

    NASA Astrophysics Data System (ADS)

    Rashid, Norhana Mohamed; Kishi, Naoki; Soga, Tetsuo

    2016-06-01

    Metallic Cu nanowires have been synthesized by thermal reduction of CuO nanowires in low concentration hydrogen environment. The Cu nanowires can be formed after removing oxide group from the metal oxide nanowires within temperature range from 200∘C to 500∘C. These nanowires have twisted structure with 100-200 nm and average lengths of 10 μm can be obtained in optimum temperature range 300-400∘C reduced for 30 min. The X-ray diffraction (XRD) pattern shows Cu peaks recognized at (111), (200) and (220). Scanning electron microscopy (SEM) images reveal the reduction temperatures strongly affect the nanowires formation. Transmission electron microscopy (TEM) images confirmed that Cu nanowires have single crystalline structures with 0.21 nm fringe spacing which correspond to (111) growth direction. The results indicate that thermal reduction of copper oxide nanowires in low concentration hydrogen environment can produce high purity and single crystalline Cu nanowires.

  3. Block based image compression technique using rank reduction and wavelet difference reduction

    NASA Astrophysics Data System (ADS)

    Bolotnikova, Anastasia; Rasti, Pejman; Traumann, Andres; Lusi, Iiris; Daneshmand, Morteza; Noroozi, Fatemeh; Samuel, Kadri; Sarkar, Suman; Anbarjafari, Gholamreza

    2015-12-01

    In this paper a new block based lossy image compression technique which is using rank reduction of the image and wavelet difference reduction (WDR) technique, is proposed. Rank reduction is obtained by applying singular value decomposition (SVD). The input image is divided into blocks of equal sizes after which quantization by SVD is carried out on each block followed by WDR technique. Reconstruction is carried out by decompressing each blocks bit streams and then merging all of them to obtain the decompressed image. The visual and quantitative experimental results of the proposed image compression technique are shown and also compared with those of the WDR technique and JPEG2000. From the results of the comparison, the proposed image compression technique outperforms the WDR and JPEG2000 techniques.

  4. Cooperative Threat Reduction: Cooperation Threat Reduction Program Liquid Propellant Disposition Project

    NASA Astrophysics Data System (ADS)

    2002-09-01

    This audit is one in a series of audits the Deputy Secretary of Defense requested. As part of the Cooperative Threat Reduction (CTR) Program, DoD agreed to assist the Russian Federation in disposing of its liquid rocket propellant. Public Law 102-228 (section 2551 NOTE, title 22, United States Code), the Soviet Nuclear Threat Reduction Act of 1991 designates DoD as the executive agent for the CTR Program. Specific objectives of the act are to destroy chemical, nuclear, and other weapons; transport, store, disable, and safeguard weapons in connection with their destruction; and establish verifiable safeguards against proliferation of weapons of mass destruction. The Office of the Assistant Secretary of Defense (International Security Policy), under the Office of the Under Secretary of Defense for Policy, develops, coordinates, and oversees implementation of policy for the CTR Program. The CTR Directorate, Defense Threat Reduction Agency operates the program.

  5. Model reduction for Space Station Freedom

    NASA Technical Reports Server (NTRS)

    Williams, Trevor

    1992-01-01

    Model reduction is an important practical problem in the control of flexible spacecraft, and a considerable amount of work has been carried out on this topic. Two of the best known methods developed are modal truncation and internal balancing. Modal truncation is simple to implement but can give poor results when the structure possesses clustered natural frequencies, as often occurs in practice. Balancing avoids this problem but has the disadvantages of high computational cost, possible numerical sensitivity problems, and no physical interpretation for the resulting balanced 'modes'. The purpose of this work is to examine the performance of the subsystem balancing technique developed by the investigator when tested on a realistic flexible space structure, in this case a model of the Permanently Manned Configuration (PMC) of Space Station Freedom. This method retains the desirable properties of standard balancing while overcoming the three difficulties listed above. It achieves this by first decomposing the structural model into subsystems of highly correlated modes. Each subsystem is approximately uncorrelated from all others, so balancing them separately and then combining yields comparable results to balancing the entire structure directly. The operation count reduction obtained by the new technique is considerable: a factor of roughly r(exp 2) if the system decomposes into r equal subsystems. Numerical accuracy is also improved significantly, as the matrices being operated on are of reduced dimension, and the modes of the reduced-order model now have a clear physical interpretation; they are, to first order, linear combinations of repeated-frequency modes.

  6. Domain reduction method for atomistic simulations

    SciTech Connect

    Medyanik, Sergey N. . E-mail: medyanik@northwestern.edu; Karpov, Eduard G. . E-mail: edkarpov@gmail.com; Liu, Wing Kam . E-mail: w-liu@northwestern.edu

    2006-11-01

    In this paper, a quasi-static formulation of the method of multi-scale boundary conditions (MSBCs) is derived and applied to atomistic simulations of carbon nano-structures, namely single graphene sheets and multi-layered graphite. This domain reduction method allows for the simulation of deformable boundaries in periodic atomic lattice structures, reduces the effective size of the computational domain, and consequently decreases the cost of computations. The size of the reduced domain is determined by the value of the domain reduction parameter. This parameter is related to the distance between the boundary of the reduced domain, where MSBCs are applied, and the boundary of the full domain, where the standard displacement boundary conditions are prescribed. Two types of multi-scale boundary conditions are derived: one for simulating in-layer multi-scale boundaries in a single graphene sheet and the other for simulating inter-layer multi-scale boundaries in multi-layered graphite. The method is tested on benchmark nano-indentation problems and the results are consistent with the full domain solutions.

  7. Steam Pressure Reduction, Opportunities, and Issues

    SciTech Connect

    Berry, Jan; Griffin, Mr. Bob; Wright, Anthony L

    2006-01-01

    Steam pressure reduction has the potential to reduce fuel consumption for a minimum capital investment. When the pressure at the boiler is reduced, fuel and steam are saved as a result of changes in the high-pressure side of the steam system from the boiler through the condensate return system. In the boiler plant, losses from combustion, boiler blowdown, radiation, and steam venting from condensate receivers would be reduced by reducing steam pressure. Similarly, in the steam distribution system, losses from radiation, flash steam vented from condensate receivers, and component and steam trap leakage would also be reduced. There are potential problems associated with steam pressure reduction, however. These may include increased boiler carryover, boiler water circulation problems in watertube boilers, increased steam velocity in piping, loss of power in steam turbines, and issues with pressure reducing valves. This paper is based a Steam Technical Brief sponsored by the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy and Enbridge Gas Distribution, Inc. (5). An example illustrates the use of DOE BestPractices Steam System Assessment Tool to model changes in steam, fuel, electricity generation, and makeup water and to estimate resulting economic benefits.

  8. Integrating social capacity into risk reduction strategies

    NASA Astrophysics Data System (ADS)

    Schneiderbauer, S.; Pedoth, L.; Zebisch, M.

    2012-04-01

    The reduction of risk to impacts from external stresses and shocks is an important task in communities worldwide at all government levels and independent of the development status. The importance of building social capacity as part of risk reduction strategies is increasingly recognized. However, there is space for improvement to incorporate related activities into a holistic risk governance approach. Starting point for such enhancements is to promote and improve assessments of what is called 'sensitivity' or 'adaptive capacity' in the climate change community and what is named 'vulnerability' or 'resilience' in the hazard risk community. Challenging issues that need to be tackled in this context are the integration of concepts and method as well as the fusion of data. Against this background we introduce a method to assess regional adaptive capacity to climate change focusing on mountain areas accounting for sector specific problems. By considering three levels of specificity as base for the selection of most appropriate indicators the study results have the potential to support decision making regarding most appropriate adaptation actions. Advantages and shortcomings of certain aspects of adaptive capacity assessment in general and of the proposed method in particular are presented.

  9. Maximum life spiral bevel reduction design

    NASA Technical Reports Server (NTRS)

    Savage, M.; Prasanna, M. G.; Coe, H. H.

    1992-01-01

    Optimization is applied to the design of a spiral bevel gear reduction for maximum life at a given size. A modified feasible directions search algorithm permits a wide variety of inequality constraints and exact design requirements to be met with low sensitivity to initial values. Gear tooth bending strength and minimum contact ratio under load are included in the active constraints. The optimal design of the spiral bevel gear reduction includes the selection of bearing and shaft proportions in addition to gear mesh parameters. System life is maximized subject to a fixed back-cone distance of the spiral bevel gear set for a specified speed ratio, shaft angle, input torque, and power. Significant parameters in the design are: the spiral angle, the pressure angle, the numbers of teeth on the pinion and gear, and the location and size of the four support bearings. Interpolated polynomials expand the discrete bearing properties and proportions into continuous variables for gradient optimization. After finding the continuous optimum, a designer can analyze near optimal designs for comparison and selection. Design examples show the influence of the bearing lives on the gear parameters in the optimal configurations. For a fixed back-cone distance, optimal designs with larger shaft angles have larger service lives.

  10. Bioinspired surfaces for turbulent drag reduction.

    PubMed

    Golovin, Kevin B; Gose, James W; Perlin, Marc; Ceccio, Steven L; Tuteja, Anish

    2016-08-01

    In this review, we discuss how superhydrophobic surfaces (SHSs) can provide friction drag reduction in turbulent flow. Whereas biomimetic SHSs are known to reduce drag in laminar flow, turbulence adds many new challenges. We first provide an overview on designing SHSs, and how these surfaces can cause slip in the laminar regime. We then discuss recent studies evaluating drag on SHSs in turbulent flow, both computationally and experimentally. The effects of streamwise and spanwise slip for canonical, structured surfaces are well characterized by direct numerical simulations, and several experimental studies have validated these results. However, the complex and hierarchical textures of scalable SHSs that can be applied over large areas generate additional complications. Many studies on such surfaces have measured no drag reduction, or even a drag increase in turbulent flow. We discuss how surface wettability, roughness effects and some newly found scaling laws can help explain these varied results. Overall, we discuss how, to effectively reduce drag in turbulent flow, an SHS should have: preferentially streamwise-aligned features to enhance favourable slip, a capillary resistance of the order of megapascals, and a roughness no larger than 0.5, when non-dimensionalized by the viscous length scale.This article is part of the themed issue 'Bioinspired hierarchically structured surfaces for green science'. PMID:27354731

  11. Benzene oxidation coupled to sulfate reduction

    USGS Publications Warehouse

    Lovley, D.R.; Coates, J.D.; Woodward, J.C.; Phillips, E.J.P.

    1995-01-01

    Highly reduced sediments from San Diego Bay, Calif., that were incubated under strictly anaerobic conditions metabolized benzene within 55 days when they were exposed initially to I ??M benzene. The rate of benzene metabolism increased as benzene was added back to the benzene-adapted sediments. When a [14C]benzene tracer was included with the benzene added to benzene-adapted sediments, 92% of the added radioactivity was recovered as 14CO2. Molybdate, an inhibitor of sulfate reduction, inhibited benzene uptake and production of 14CO2 from [14C]benzene. Benzene metabolism stopped when the sediments became sulfate depleted, and benzene uptake resumed when sulfate was added again. The stoichiometry of benzene uptake and sulfate reduction was consistent with the hypothesis that sulfate was the principal electron acceptor for benzene oxidation. Isotope trapping experiments performed with [14C]benzene revealed that there was no production of such potential extracellular intermediates of benzene oxidation as phenol, benzoate, p-hydroxybenzoate, cyclohexane, catechol, and acetate. The results demonstrate that benzene can be oxidized in the absence of O2, with sulfate serving as the electron acceptor, and suggest that some sulfate reducers are capable of completely oxidizing benzene to carbon dioxide without the production of extracellular intermediates. Although anaerobic benzene oxidation coupled to chelated Fe(III) has been documented previously, the study reported here provides the first example of a natural sediment compound that can serve as an electron acceptor for anaerobic benzene oxidation.

  12. Oxygen reduction in fuel cell electrolytes

    SciTech Connect

    Striebel, K.A.

    1987-01-01

    Voltage losses in the O{sub 2} cathode represent the major inefficiency in aqueous fuel cells for transportation or stationary applications. Experimental and theoretical studies of oxygen reduction (OR) in novel acid and alkaline electrolytes on smooth and supported Pt have been carried out. Similar kinetically limited rates for OR were measured in the super-acid electrolytes trifluoromethane sulfonic acid (TFMSA) and tetrafluoroethane-1,2-disulfonic acid (TFEDSA), with the rotating disk electrode (RDE) technique at 23 C and pH = 1. The mechanism for OR on Pt in alkaline electrolytes is complicated by the concurrent oxidation and reduction of Pt. Rotating ring-disk electrode (RRDE) studies carried out with anodic and cathodic potential sweeps in 0.1 to 6.9 M KOH and 0.1 to 4.0 M K{sub 2}CO{sub 3} revealed similar currents when corrected for O{sub 2} solubility differences. Porous gas diffusion electrodes (GDE) with supported Pt catalyst were studied in a special cell with low uncompensated solution resistance. Cyclic voltammograms yielded measurements of the wetted areas of carbon and Pt and the local electrolyte composition. Models for the steady-state operation of porous GDE's were developed. These models account for the diffusion and reaction of O{sub 2} and ionic transport in KOH and K{sub 2}CO{sub 3}. The results suggest that modifications of the GDE structure will be necessary to obtain good performance with aqueous carbonate electrolytes.

  13. The Error in Total Error Reduction

    PubMed Central

    Witnauer, James E.; Urcelay, Gonzalo P.; Miller, Ralph R.

    2013-01-01

    Most models of human and animal learning assume that learning is proportional to the discrepancy between a delivered outcome and the outcome predicted by all cues present during that trial (i.e., total error across a stimulus compound). This total error reduction (TER) view has been implemented in connectionist and artificial neural network models to describe the conditions under which weights between units change. Electrophysiological work has revealed that the activity of dopamine neurons is correlated with the total error signal in models of reward learning. Similar neural mechanisms presumably support fear conditioning, human contingency learning, and other types of learning. Using a computational modelling approach, we compared several TER models of associative learning to an alternative model that rejects the TER assumption in favor of local error reduction (LER), which assumes that learning about each cue is proportional to the discrepancy between the delivered outcome and the outcome predicted by that specific cue on that trial. The LER model provided a better fit to the reviewed data than the TER models. Given the superiority of the LER model with the present data sets, acceptance of TER should be tempered. PMID:23891930

  14. Edge-preserving metal artifact reduction

    NASA Astrophysics Data System (ADS)

    Meyer, Esther; Raupach, Rainer; Lell, Michael; Schmidt, Bernhard; Kachelriess, Marc

    2012-03-01

    Metal implants in the field of measurement lead to strong artifacts in CT images and reduce the image quality and the diagnostic value severely. We introduce frequency split metal artifact reduction (FSMAR), a conceptually new MAR method which is designed to reduce metal artifacts and preserve details and edges of structures even close to metal implants. There are many MAR methods which simply replace unreliable parts of the projection data by inpainting. FSMAR is a combination of an inpainting-based MAR method with a frequency split approach. Normalized metal artifact reduction (NMAR) is chosen as the inpainting-based MAR method in this work. The high frequencies of the original image, where all rawdata were used for the reconstruction, are combined with an NMAR-corrected image. NMAR uses a normalization step to reduce metal artifacts without introducing severe new artifacts. Algorithms using a frequency split were already used in CT for example to reduce cone-beam artifacts. FSMAR is tested for patient datasets with different metal implants. The study includes patients with hip prostheses, a neuro coil, and a spine fixation. All datasets were scanned with modern clinical dual source CT scanners. In contrast to other MAR methods, FSMAR yields images without the usual blurring close to metal implants.

  15. Simple noise reduction for diffusion weighted images.

    PubMed

    Konishi, Yuto; Kanazawa, Yuki; Usuda, Takatoshi; Matsumoto, Yuki; Hayashi, Hiroaki; Matsuda, Tsuyoshi; Ueno, Junji; Harada, Masafumi

    2016-07-01

    Our purpose in this study was to reduce the noise in order to improve the SNR of Dw images with high b-value by using two correction schemes. This study was performed with use of phantoms made from water and sucrose at different concentrations, which were 10, 30, and 50 weight percent (wt%). In noise reduction for Dw imaging of the phantoms, we compared two correction schemes that are based on the Rician distribution and the Gaussian distribution. The highest error values for each concentration with use of the Rician distribution scheme were 7.3 % for 10 wt%, 2.4 % for 30 wt%, and 0.1 % for 50 wt%. The highest error values for each concentration with use of the Gaussian distribution scheme were 20.3 % for 10 wt%, 11.6 % for 30 wt%, and 3.4 % for 50 wt%. In Dw imaging, the noise reduction makes it possible to apply the correction scheme of Rician distribution. PMID:26984734

  16. Intelligent data reduction for autonomous power systems

    NASA Technical Reports Server (NTRS)

    Floyd, Stephen A.

    1988-01-01

    Since 1984 Marshall Space Flight Center was actively engaged in research and development concerning autonomous power systems. Much of the work in this domain has dealt with the development and application of knowledge-based or expert systems to perform tasks previously accomplished only through intensive human involvement. One such task is the health status monitoring of electrical power systems. Such monitoring is a manpower intensive task which is vital to mission success. The Hubble Space Telescope testbed and its associated Nickel Cadmium Battery Expert System (NICBES) were designated as the system on which the initial proof of concept for intelligent power system monitoing will be established. The key function performed by an engineer engaged in system monitoring is to analyze the raw telemetry data and identify from the whole only those elements which can be considered significant. This function requires engineering expertise on the functionality of the system, the mode of operation and the efficient and effective reading of the telemetry data. Application of this expertise to extract the significant components of the data is referred to as data reduction. Such a function possesses characteristics which make it a prime candidate for the application of knowledge-based systems' technologies. Such applications are investigated and recommendations are offered for the development of intelligent data reduction systems.

  17. Substance abuse and developments in harm reduction.

    PubMed

    Cheung, Y W

    2000-06-13

    A drug is a substance that produces a psychoactive, chemical or medicinal effect on the user. The psychoactive effect of mood-altering drugs is modulated by the user's perception of the risks of drug use, his or her ability to control drug use and the demographic, socioeconomic and cultural context. The ability to control drug use may vary along a continuum from compulsive use at one end to controlled use at the other. The "drug problem" has been socially constructed, and the presence of a moral panic has led to public support for the prohibitionist approach. The legalization approach has severely attacked the dominant prohibitionist approach but has failed to gain much support in society because of its extreme libertarian views. The harm reduction approach, which is based on public health principles, avoids the extremes of value-loaded judgements on drug use and focuses on the reduction of drug-related harm through pragmatic and low-threshold programs. This approach is likely to be important in tackling the drug problem in the 21st century. PMID:10870502

  18. NO{sub x} reduction techniques

    SciTech Connect

    Irwin, B.

    1995-10-01

    NO{sub x} is the combination of nitrogen and oxygen that contributes to acid rain and smog problems. It is formed in high-temperature flames and processes, including kilns and furnaces. Reducing this pollutant is a universal concern, and its regulation will be increased as individual states devise their implementation plans for complying with the US Clean Air Act. The recognized mechanisms for the formation of NO{sub x} in combustion are: Prompt NO{sub x}, which occurs in the flame process of cracking hydrocarbons; Thermal NO{sub x}, which is formed at high temperatures in the presence of free oxygen; and fuel-bond NO{sub x}, which is caused by the conversion of nitrogen atoms attached to a fuel molecule during combustion. NO{sub x} control methods can cause concerns, because they can be costly, complex and do nothing to improve the heating process. Although this is true of several control methods, such as specific catalytic (with ammonia injection) reduction or water injection, there are some methods that can improve the heating process, as well as lower NO{sub x}. In many cases, the temperature uniformity can actually improve, because NO{sub x} reduction techniques frequently lower the localized high flame temperature by mixing the flame with flue gases. This article describes some of these methods.

  19. Exploration Mission Benefits From Logistics Reduction Technologies

    NASA Technical Reports Server (NTRS)

    Broyan, James Lee, Jr.; Schlesinger, Thilini; Ewert, Michael K.

    2016-01-01

    Technologies that reduce logistical mass, volume, and the crew time dedicated to logistics management become more important as exploration missions extend further from the Earth. Even modest reductions in logical mass can have a significant impact because it also reduces the packing burden. NASA's Advanced Exploration Systems' Logistics Reduction Project is developing technologies that can directly reduce the mass and volume of crew clothing and metabolic waste collection. Also, cargo bags have been developed that can be reconfigured for crew outfitting and trash processing technologies to increase habitable volume and improve protection against solar storm events are under development. Additionally, Mars class missions are sufficiently distant that even logistics management without resupply can be problematic due to the communication time delay with Earth. Although exploration vehicles are launched with all consumables and logistics in a defined configuration, the configuration continually changes as the mission progresses. Traditionally significant ground and crew time has been required to understand the evolving configuration and locate misplaced items. For key mission events and unplanned contingencies, the crew will not be able to rely on the ground for logistics localization assistance. NASA has been developing a radio frequency identification autonomous logistics management system to reduce crew time for general inventory and enable greater crew self-response to unplanned events when a wide range of items may need to be located in a very short time period. This paper provides a status of the technologies being developed and there mission benefits for exploration missions.

  20. Drag reduction on liquid infused superhydrophobic surfaces

    NASA Astrophysics Data System (ADS)

    Kim, Jeong-Hyun; Rothstein, Jonathan

    2014-11-01

    The drag reduction on liquid infused superhydrophobic surfaces was measured through a microchannel. The microfluidic device consisted of two halves, a superhydrophobic surface and a microchannel, respectively. The superhydrophobic surface was created from a silicon wafer with ridge patterns 30 to 60 microns in width and spacing generated by a standard photolithography. A low viscosity, immiscible, incompressible silicone oil was filled to the gaps of the superhydrophobic surfaces. Several microchannels varying in size from 100 to 200 microns were fabricated from PDMS with an inlet, outlet and two pressure ports. After flow coating the superhydrophobic surface with a uniform film of oil, the two halves were aligned and clamped together and the pressure drop measured. A systematic study on drag reduction and slip length was performed by varying the viscosity ratio between the water and oil phase between 0 to 50. Several aqueous glycerin solutions with different viscosity were prepared. The slip length, pressure drop, and longevity of the oil phase were studied as a function of surface geometry, capillary number and the dispense volume. NSF CBET-1334962.

  1. A Conserved Mechanism for Sulfonucleotide Reduction

    PubMed Central

    2005-01-01

    Sulfonucleotide reductases are a diverse family of enzymes that catalyze the first committed step of reductive sulfur assimilation. In this reaction, activated sulfate in the context of adenosine-5′-phosphosulfate (APS) or 3′-phosphoadenosine 5′-phosphosulfate (PAPS) is converted to sulfite with reducing equivalents from thioredoxin. The sulfite generated in this reaction is utilized in bacteria and plants for the eventual production of essential biomolecules such as cysteine and coenzyme A. Humans do not possess a homologous metabolic pathway, and thus, these enzymes represent attractive targets for therapeutic intervention. Here we studied the mechanism of sulfonucleotide reduction by APS reductase from the human pathogen Mycobacterium tuberculosis, using a combination of mass spectrometry and biochemical approaches. The results support the hypothesis of a two-step mechanism in which the sulfonucleotide first undergoes rapid nucleophilic attack to form an enzyme-thiosulfonate (E-Cys-S-SO3−) intermediate. Sulfite is then released in a thioredoxin-dependent manner. Other sulfonucleotide reductases from structurally divergent subclasses appear to use the same mechanism, suggesting that this family of enzymes has evolved from a common ancestor. PMID:16008502

  2. Drag reduction of a heavy vehicle

    NASA Astrophysics Data System (ADS)

    Ortega, Jason; Salari, Kambiz

    2007-11-01

    During the 1970's and 1980's, a number of first-generation drag reduction devices were designed to reduce the aerodynamic losses of heavy vehicles (Cooper, 2003). The result of this effort led to the development of a number of devices that improved the aerodynamics of a heavy vehicle tractor. Additionally, a number of second-generation devices were developed for heavy vehicle trailers. Unfortunately, these trailer devices did not enter into the market on a wide-scale basis and, as a result, the modern heavy vehicle trailer largely remains a ``box on wheels'' with minimal aerodynamic consideration taken into its design. The primary obstacle to implementing trailer devices was not their effectiveness in reducing drag, but rather operational, maintenance, and ultimately, economic concerns. However, with rising fuel costs and potentially unstable fuel supplies, there is a renewed objective to further reduce heavy vehicle fuel usage. To accomplish this purpose, the present study investigates the drag reduction capability of a trailer device, which neither reduces the trailer cargo capacity, nor limits access to the trailer doors. RANS simulations are performed on a full-scale tractor-trailer that is traveling at highway conditions with and without the trailer device. This work was performed under the auspices of the U.S. Department of Energy by the University of California, Lawrence Livermore National Laboratory under Contract No. W-7405-Eng-48.

  3. Steam consumption reduction by eutectic freeze crystallization

    SciTech Connect

    Bichsel, S.E.; Cleary, M.; Barron, T.S.; Heist, J.A.

    1985-01-01

    Steam production in American beet sugar factories can be reduced by 600 pounds per ton of beets by using hydrate freeze crystallization in place of pan evaporators for sugar crystallization. This is a relatively constant number, regardless of current factory energy use. Further reduction is limited by the juice heating needs in the purification operations. Steam for juice heating is 20 to 30% on beets, or 400 to 600 pounds of steam per ton. In efficient factories this is about the steam flow to the evaporators when the pan crystallizers are replaced by freeze crystallization. An approach is described here for a rapid evaluation of effects on the steam balance of basic process changes. It provides a visual guide to restructuring the steam balance that simplifies optimization when such changes are made. The graphic approach is useful in illustrating methods of reducing energy use in a sugar factory, in addition to the current analysis of integration of the hydrate freeze process. For example, membrane and vapor recompression evaporators for juice concentration must be accompanied by major factory modifications to produce any net savings of steam. The reason is the needs for specific steam quantity and quality for the pan evaporators and juice heaters, supplied through the current evaporator trains. Reduction of the steam rate below 25 to 35% on beets will require changes to the conventional juice purification process.

  4. Liquor Activity Reduction (LAR) Programme - 12397

    SciTech Connect

    Pether, Colin; Carrol, Phil; Birkett, Eddie; Kibble, Matthew

    2012-07-01

    Waste material from the reprocessing of irradiated fuel has been stored under water for several decades leading to the water becoming highly radioactive. As a critical enabler to the decommissioning strategy for the Sellafield site, the Liquor Activity Reduction (LAR) programme has been established to provide a processing route for this highly radioactive liquor. This paper reviews the progress that has been made since the start of routine LAR transfer cycles (July 2010) and follows on from the earlier paper presented at WM2011. The paper focuses on the learning from the first full year of routine LAR transfer cycles and the application of this learning to the wider strategies for the treatment of further radioactive liquid effluents on the Sellafield site. During this period over 100,000 Curies of radioactivity has been safely removed and treated. The past year has witnessed the very successful introduction of the LAR programme. This has lead to hazard reduction at MSSS and demonstration that the SIXEP facility can meet the significantly increased challenge that the LAR programme represents. Part of the success has been the ability to predict and deliver a realistic production schedule with the availability of the MSSS, EDT and SIXEP facilities being central to this. Most importantly, the LAR programme has been successful in bringing together key stakeholders to deliver this work while integrating with the existing, day to day, demands of the Sellafield site. (authors)

  5. Photovoltaic cost reduction powered by nuclear spending

    NASA Astrophysics Data System (ADS)

    Smith, Timothy; Deinert, Mark

    2013-04-01

    Between 1975 to 2010, Japan has spent an average of 2700 Million per year on nuclear R&D and 74 Million per year on solar energy R&D (2010 dollars). While the cost of photovoltaics dropped by a factor of 30 during that time, the overnight cost to build a nuclear power plant has doubled between 2003 and 2009. The price of commercially available photovoltaics has been shown to follow a power law reduction with the number of units produced. This begs the question as to what the current price of these systems would be had some of the available funds used for nuclear R&D been spent on the acquisition of photovoltaics. Here we show the reduction in price for single crystal photovoltaic panels if the Japanese government spent some of their nuclear R&D funds on the installation of these systems. We use historical cost and cumulative production for the world and Japan to build a learning curve model for PV. If the government had spent only 0.07% of its nuclear R&D budget toward PV technology since 1975, photovoltaics would now have reached 1/Watt, the point at which they are cost competitive with conventional resources.

  6. Combination for electrolytic reduction of alumina

    DOEpatents

    Brown, Craig W.; Brooks, Richard J.; Frizzle, Patrick B.; Juric, Drago D.

    2002-04-30

    An electrolytic bath for use during the electrolytic reduction of alumina to aluminum. The bath comprises molten electrolyte having the following ingredients: AlF.sub.3 and at least one salt selected from the group consisting of NaF, KF, and LiF; and about 0.004 wt. % to about 0.2 wt. %, based on total weight of the molten electrolyte, of at least one transition metal or at least one compound of the metal or both. The compound is, a fluoride; oxide, or carbonate. The metal is nickel, iron, copper, cobalt, or molybdenum. The bath is employed in a combination including a vessel for containing the bath and at least one non-consumable anode and at least one dimensionally stable cathode in the bath. Employing the instant bath during electrolytic reduction of alumina to aluminum improves the wetting of aluminum on a cathode by reducing or eliminating the formation of non-metallic deposits on the cathode.

  7. Sufficient dimension reduction with additional information.

    PubMed

    Hung, Hung; Liu, Chih-Yen; Horng-Shing Lu, Henry

    2016-07-01

    Sufficient dimension reduction is widely applied to help model building between the response [Formula: see text] and covariate [Formula: see text] In some situations, we also collect additional covariate [Formula: see text] that has better performance in predicting [Formula: see text], but has a higher obtaining cost, than [Formula: see text] While constructing a predictive model for [Formula: see text] based on [Formula: see text] is straightforward, this strategy is not applicable since [Formula: see text] is not available for future observations in which the constructed model is to be applied. As a result, the aim of the study is to build a predictive model for [Formula: see text] based on [Formula: see text] only, where the available data is [Formula: see text] A naive method is to conduct analysis using [Formula: see text] directly, but ignoring [Formula: see text] can cause the problem of inefficiency. On the other hand, it is not trivial to utilize the information of [Formula: see text] to infer [Formula: see text], either. In this article, we propose a two-stage dimension reduction method for [Formula: see text] that is able to utilize the information of [Formula: see text] In the breast cancer data, the risk score constructed from the two-stage method can well separate patients with different survival experiences. In the Pima data, the two-stage method requires fewer components to infer the diabetes status, while achieving higher classification accuracy than the conventional method. PMID:26704765

  8. Waste reduction at a propellant manufacturing site

    SciTech Connect

    Beer, L.A.

    1994-12-31

    It is the US Army policy to reduce the volume and toxicity of hazardous waste generated by its operations and activities. The Army established a goal to reduce 1985 waste generation levels by 50% by the year 1992, with additional reductions proposed through 1999 per Army guidance. To assist in accomplishing this goal, the Production Base Modernization Activity under a program sponsored by the US Army Materiel Command contracted Science Applications International Corporation to conduct a waste minimization audit at Radford Army Ammunition Plant. This study addressed hazardous wastes as well as non-hazardous oily wastes. The investigation was conducted in three phases to document how hazardous and oily wastes are produced and to recommend waste reduction alternatives. Radford Army Ammunition Plant (RAAP) produces in-process materials such as nitric and sulfuric acids, and propellant components including nitrocellulose and nitroglycerin. In addition, to propellants, the explosives trinitrotoluene and diethylene glycol dinitrate can be produced. The manufacture of military propellants generates the majority of waste at the facility. This paper will present the results of the RAAP Hazmin study, focusing on the major waste generating processes involved with propellant manufacture, Hazmin options suggested to minimize waste generation, and lessons learned.

  9. Turbulent drag reduction in nonionic surfactant solutions

    NASA Astrophysics Data System (ADS)

    Tamano, Shinji; Itoh, Motoyuki; Kato, Katsuo; Yokota, Kazuhiko

    2010-05-01

    There are only a few studies on the drag-reducing effect of nonionic surfactant solutions which are nontoxic and biodegradable, while many investigations of cationic surfactant solutions have been performed so far. First, the drag-reducing effects of a nonionic surfactant (AROMOX), which mainly consisted of oleyldimethylamineoxide, was investigated by measuring the pressure drop in the pipe flow at solvent Reynolds numbers Re between 1000 and 60 000. Second, we investigated the drag-reducing effect of a nonionic surfactant on the turbulent boundary layer at momentum-thickness Reynolds numbers Reθ from 443 to 814 using two-component laser-Doppler velocimetry and particle image velocimetry systems. At the temperature of nonionic surfactant solutions, T =25 °C, the maximum drag reduction ratio for AROMOX 500 ppm was about 50%, in the boundary layer flow, although the drag reduction ratio was larger than 60% in pipe flow. Turbulence statistics and structures for AROMOX 500 ppm showed the behavior of typical drag-reducing flow such as suppression of turbulence and modification of near-wall vortices, but they were different from those of drag-reducing cationic surfactant solutions, in which bilayered structures of the fluctuating velocity vectors were observed in high activity.

  10. Perchlorate Reduction by Yeast for Mars Exploration

    NASA Technical Reports Server (NTRS)

    Sharma, Alaisha

    2015-01-01

    Martian soil contains high levels (0.6 percentage by mass) of calcium perchlorate (Ca(ClO4)2), which readily dissociates into calcium and the perchlorate ion (ClO4-) in water. Even in trace amounts, perchlorates are toxic to humans and have been implicated in thyroid dysfunction. Devising methods to lessen perchlorate contamination is crucial to minimizing the health risks associated with human exploration and colonization of Mars. We designed a perchlorate reduction pathway, which sequentially reduces perchlorate to chloride (Cl-) and oxygen (O2), for implementation in the yeast Saccharomyces cerevisiae. Using genes obtained from perchlorate reducing bacteria Azospira oryzae and Dechloromonas aromatica, we plan to assemble this pathway directly within S. cerevisiae through recombinational cloning. A perchlorate reduction pathway would enable S. cerevisiae to lower perchlorate levels and produce oxygen, which may be harvested or used directly by S. cerevisiae for aerobic growth and compound synthesis. Moreover, using perchlorate as an external electron acceptor could improve the efficiency of redox-imbalanced production pathways in yeast. Although several perchlorate reducing bacteria have been identified and utilized in water treatment systems on Earth, the widespread use of S. cerevisiae as a synthetic biology platform justifies the development of a perchlorate reducing strain for implementation on Mars.

  11. Logistics Reduction Technologies for Exploration Missions

    NASA Technical Reports Server (NTRS)

    Broyan, James L., Jr.; Ewert, Michael K.; Fink, Patrick W.

    2014-01-01

    Human exploration missions under study are very limited by the launch mass capacity of existing and planned vehicles. The logistical mass of crew items is typically considered separate from the vehicle structure, habitat outfitting, and life support systems. Consequently, crew item logistical mass is typically competing with vehicle systems for mass allocation. NASA's Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) Project is developing five logistics technologies guided by a systems engineering cradle-to-grave approach to enable used crew items to augment vehicle systems. Specifically, AES LRR is investigating the direct reduction of clothing mass, the repurposing of logistical packaging, the use of autonomous logistics management technologies, the processing of spent crew items to benefit radiation shielding and water recovery, and the conversion of trash to propulsion gases. The systematic implementation of these types of technologies will increase launch mass efficiency by enabling items to be used for secondary purposes and improve the habitability of the vehicle as the mission duration increases. This paper provides a description and the challenges of the five technologies under development and the estimated overall mission benefits of each technology.

  12. Exploration Mission Benefits From Logistics Reduction Technologies

    NASA Technical Reports Server (NTRS)

    Broyan, James Lee, Jr.; Ewert, Michael K.; Schlesinger, Thilini

    2016-01-01

    Technologies that reduce logistical mass, volume, and the crew time dedicated to logistics management become more important as exploration missions extend further from the Earth. Even modest reductions in logistical mass can have a significant impact because it also reduces the packaging burden. NASA's Advanced Exploration Systems' Logistics Reduction Project is developing technologies that can directly reduce the mass and volume of crew clothing and metabolic waste collection. Also, cargo bags have been developed that can be reconfigured for crew outfitting, and trash processing technologies are under development to increase habitable volume and improve protection against solar storm events. Additionally, Mars class missions are sufficiently distant that even logistics management without resupply can be problematic due to the communication time delay with Earth. Although exploration vehicles are launched with all consumables and logistics in a defined configuration, the configuration continually changes as the mission progresses. Traditionally significant ground and crew time has been required to understand the evolving configuration and to help locate misplaced items. For key mission events and unplanned contingencies, the crew will not be able to rely on the ground for logistics localization assistance. NASA has been developing a radio-frequency-identification autonomous logistics management system to reduce crew time for general inventory and enable greater crew self-response to unplanned events when a wide range of items may need to be located in a very short time period. This paper provides a status of the technologies being developed and their mission benefits for exploration missions.

  13. Open Reduction Internal Fixation Poststernotomy Mediastinitis

    PubMed Central

    Dionisopoulos, Tassos

    2013-01-01

    Introduction. Mediastinitis has been reported to complicate 5% of sternotomy surgery. We have adopted an open reduction and rigid internal fixation (ORIF) approach during the conventional rescue surgery in the treatment of mediastinitis. Methods. A retrospective review was performed to compare the outcomes of patients that had an ORIF to correct postoperative mediastinitis following median sternotomy. These were compared with the outcome of the patients that did not undergo ORIF. Results. In the 5-year study period, we reviewed 35 mediastinitis patient charts. Postoperatively, the ORIF patient group remained in the Intensive Care Unit (ICU) and on a ventilator for a mean of 1.5 and 0.75 days, respectively. Patients treated without ORIF spent significantly more days in the ICU (mean of 7.5 days, P < 0.05) and on a ventilator (mean of 2.15 days, P = 0.1). Furthermore, it was found that none of the patients (0%) who underwent ORIF complained of any postoperative sternal instability or pain. Preoperatively, however, these rates were as high as 72%. Conclusions. In the select patient, ORIF can be a safe option in the management of mediastinitis, which we have shown to significantly decrease morbidity and mortality by providing anatomic reduction as well as physiologic stabilization. We have shown that ORIF will improve the quality of life of the patient by minimizing abnormal sternal mobility and pain and will also decrease inpatient costs by decreasing days spent in the ICU and ventilator dependence. PMID:23970966

  14. How phonological reductions sometimes help the listener.

    PubMed

    Mitterer, Holger; Russell, Kevin

    2013-05-01

    In speech production, high-frequency words are more likely than low-frequency words to be phonologically reduced. We tested in an eye-tracking experiment whether listeners can make use of this correlation between lexical frequency and phonological realization of words. Participants heard prefixed verbs in which the prefix was either fully produced or reduced. Simultaneously, they saw a high-frequency verb and a low-frequency verb with this prefix-plus 2 distractors-on a computer screen. Participants were more likely to look at the high-frequency verb when they heard a reduced prefix than when they heard a fully produced prefix. Listeners hence exploit the correlation of lexical frequency and phonological reduction and assume that a reduced prefix is more likely to belong to a high-frequency word. This shows that reductions do not necessarily burden the listener but may in fact have a communicative function, in line with functional theories of phonology. PMID:22799281

  15. Metal artifact reduction in tomosynthesis imaging

    NASA Astrophysics Data System (ADS)

    Zhang, Zhaoxia; Yan, Ming; Tao, Kun; Xuan, Xiao; Sabol, John M.; Lai, Hao

    2015-03-01

    The utility of digital tomosynthesis has been shown for many clinical scenarios including post orthopedic surgery applications. However, two kinds of metal artifacts can influence diagnosis: undershooting and ripple. In this paper, we describe a novel metal artifact reduction (MAR) algorithm to reduce both of these artifacts within the filtered backprojection framework. First, metal areas that are prone to cause artifacts are identified in the raw projection images. These areas are filled with values similar to those in the local neighborhood. During the filtering step, the filled projection is free of undershooting due to the resulting smooth transition near the metal edge. Finally, the filled area is fused with the filtered raw projection data to recover the metal. Since the metal areas are recognized during the back projection step, anatomy and metal can be distinguished - reducing ripple artifacts. Phantom and clinical experiments were designed to quantitatively and qualitatively evaluate the algorithms. Based on phantom images with and without metal implants, the Artifact Spread Function (ASF) was used to quantify image quality in the ripple artifact area. The tail of the ASF with MAR decreases from in-plane to out-of-plane, implying a good artifact reduction, while the ASF without MAR remains high over a wider range. An intensity plot was utilized to analyze the edge of undershooting areas. The results illustrate that MAR reduces undershooting while preserving the edge and size of the metal. Clinical images evaluated by physicists and technologists agree with these quantitative results to further demonstrate the algorithm's effectiveness.

  16. Titanium Catalyzed Perchlorate Reduction and Applications

    SciTech Connect

    Gu, Baohua; Bonnesen, Peter V; Sloop Jr, Frederick {Fred} V; Brown, Gilbert M

    2006-01-01

    This work provides a proof-of-principle demonstration that Ti(III)-catalyzed electrochemical techniques could potentially be used for reduction of ClO{sub 4}{sup -} in small waste streams, such as the regeneration of selective anion-exchange resins that are loaded with ClO{sub 4}{sup -}. The technique may not be directly applied for the treatment of large volumes of ClO{sub 4}{sup -}-contaminated water at relatively low concentrations because of its slow reaction kinetics and the use of chemical reagents. Further studies are needed to optimize the reaction conditions in order to achieve a complete reduction of ClO{sub 4}{sup -} and the regeneration of spent resin beds. Alternative complexing and reducing agents may be used to enhance the reaction completeness of sorbed ClO{sub 4}{sup -} in the resin and to overcome potential clogging of micropores within the resin beads resulting from the precipitation of TiO{sub 2}.

  17. Mission Benefits Analysis of Logistics Reduction Technologies

    NASA Technical Reports Server (NTRS)

    Ewert, Michael K.; Broyan, James L.

    2012-01-01

    Future space exploration missions will need to use less logistical supplies if humans are to live for longer periods away from our home planet. Anything that can be done to reduce initial mass and volume of supplies or reuse or recycle items that have been launched will be very valuable. Reuse and recycling also reduce the trash burden and associated nuisances, such as smell, but require good systems engineering and operations integration to reap the greatest benefits. A systems analysis was conducted to quantify the mass and volume savings of four different technologies currently under development by NASA fs Advanced Exploration Systems (AES) Logistics Reduction and Repurposing project. Advanced clothing systems lead to savings by direct mass reduction and increased wear duration. Reuse of logistical items, such as packaging, for a second purpose allows fewer items to be launched. A device known as a heat melt compactor drastically reduces the volume of trash, recovers water and produces a stable tile that can be used instead of launching additional radiation protection. The fourth technology, called trash ]to ]supply ]gas, can benefit a mission by supplying fuel such as methane to the propulsion system. This systems engineering work will help improve logistics planning and overall mission architectures by determining the most effective use, and reuse, of all resources.

  18. Mission Benefits Analysis of Logistics Reduction Technologies

    NASA Technical Reports Server (NTRS)

    Ewert, Michael K.; Broyan, James Lee, Jr.

    2013-01-01

    Future space exploration missions will need to use less logistical supplies if humans are to live for longer periods away from our home planet. Anything that can be done to reduce initial mass and volume of supplies or reuse or recycle items that have been launched will be very valuable. Reuse and recycling also reduce the trash burden and associated nuisances, such as smell, but require good systems engineering and operations integration to reap the greatest benefits. A systems analysis was conducted to quantify the mass and volume savings of four different technologies currently under development by NASA s Advanced Exploration Systems (AES) Logistics Reduction and Repurposing project. Advanced clothing systems lead to savings by direct mass reduction and increased wear duration. Reuse of logistical items, such as packaging, for a second purpose allows fewer items to be launched. A device known as a heat melt compactor drastically reduces the volume of trash, recovers water and produces a stable tile that can be used instead of launching additional radiation protection. The fourth technology, called trash-to-gas, can benefit a mission by supplying fuel such as methane to the propulsion system. This systems engineering work will help improve logistics planning and overall mission architectures by determining the most effective use, and reuse, of all resources.

  19. Dispersion-reduction technique using subcarrier multiplexing

    SciTech Connect

    Sargis, P.D.; Haigh, R.E.; McCammon, K.G.

    1995-10-18

    We have developed a novel dispersion-reduction technique using subcarrier multiplexing (SCM) which permits the transmission of multiple 2.5 Gbit/s data channels over hundreds of kilometers of conventional fiber-optic cable with negligible dispersion. Using a lithium niobate external modulator having a modulation bandwidth of 20 GHz, we are able to multiplex several high-speed data channels at a single wavelength. At the receiving end, we demultiplex the data and detect each channel using a 2-GHz bandwidth optical detector. All of the hardware in our system consists of off-the-shelf components and can be integrated to reduce the overall cost. We demonstrated our dispersion-reduction technique in a recent field trial by transmitting two 2.5 Gbit/s data channels over 90 km of commercially-installed single-mode fiber, followed by 210 km of spooled fiber. For comparison, we substituted the 300 km of fiber with equivalent optical attenuation. We also ran computer simulations to evaluate link behavior. Technical details and field trial results will be presented.

  20. Assisted reproduction and selective reduction of pregnancy.

    PubMed

    Brahams, D

    1987-12-12

    The question of multiple pregnancies came into public debate when septuplets were born to a mother in Liverpool and none survived. The question arises as to whether it is ethical and legally appropriate to carry out a selective reduction of pregnancy, i.e., to destroy 1 or more fetuses in order to give the remaining fetus or fetuses a better chance at survival. In terms of the law, the fetuses are not live being, with the benefit of full legal protection. While it is too immature to be viable, any fetus may be legally aborted as long as the terms of the 1967 Abortion Act are met. Each year in the UK some 170,000 abortions are performed, and it appears that the selective killing of some immature and nonviable fetuses in the womb could come within the terms of the 1967 Abortion Act. The Voluntary Licensing Authority announced in May 1987 its intention to impose restrictions on in-vitro fertilization (IVF) on the number of implants/cycle, with a view toward curbing the frequency of multiple pregnancies and to reduce the need for selective reduction of pregnancy. The new guidelines now provide that "if the IVF procedure is used no more than 3 pre-embryos should be transferred in any cycle, unless there are exceptional clinical reasons when up to 4 pre-embryos may be replaced per cycle. If the GIFT (gamete intrafallopian transfer) procedure is used no more than 3 or exceptionally 4 eggs should be introduced to the fallopian tubes." There is no maximum regarding the dose of a drug used in the treatment of infertility, although such a drug may give rise to multiple pregnancies. According to the guidelines, each center should have access to an ethical committee, and no procedure should be undertaken without the knowledge and consent of the ethical committee. Professor Ian Craft, supported by his team at the private Humana Hospital in Wellington, voiced his unwillingness to abide by the new guidelines. He maintains that only the doctor and the patient or the couple should