Science.gov

Sample records for referenzwerte und peak

  1. Branchen und Unternehmensbereiche

    NASA Astrophysics Data System (ADS)

    Kramer, Regine

    Dieses Kapitel gibt einen Überblick über die Haupteinsatzgebiete von Mathematikern, Informatikern, Naturwissenschaftlern und Ingenieuren in den wichtigsten Wirtschaftsbranchen und Unternehmensbereichen. Dabei werden ausbildungsnahe Aufgabenbereiche ebenso beschrieben wie eher fachferne Tätigkeiten und neben den klassischen Branchen und Berufsbildern auch neue Tätigkeitsfelder für MINT-Fachkräfte beschrieben.

  2. Portable peak flow meters.

    PubMed

    McNaughton, J P

    1997-02-01

    There are several portable peak flow meters available. These instruments vary in construction and performance. Guidelines are recommended for minimum performance and testing of portable peak flow meters, with the aim of establishing a procedure for standardizing all peak flow meters. Future studies to clarify the usefulness of mechanical test apparatus and clinical trials of peak flow meters are also recommended. PMID:9098706

  3. Peak flow meter (image)

    MedlinePlus

    A peak flow meter is commonly used by a person with asthma to measure the amount of air that can be ... become narrow or blocked due to asthma, peak flow values will drop because the person cannot blow ...

  4. Welt und Wirkungsprinzip

    NASA Astrophysics Data System (ADS)

    Landgraf, Werner

    1997-05-01

    Modell einer kausalen Bewirkung der Welt, und logische, geometrische, physikalische Interprätation dieser Kausalmenge und Fortwirkung der frühsten ihrer sukzessiv als echt Neues bewirkten und durch Vorhandenes oder Späteres nicht darstellbaren oder widerrufbaren Ereignisse als Dimensionen und sie verkörpernde primäre Naturkräfte, mit Korrespondenz zur beobachteten Welt und ihrer grundlegendsten Eigenschaften. Wirklich ist nur was wirkt, wo und wie. Entsprechend ist im Bogenelement statt der Eigenzeit die variante Anzahl Wirkungen relevant, 0 ≈ 1/h2 dS2 - 1/tpl2 (dt2 - 1/c2 {dq12 + G02/G2 [dq2,32 - ...]}) mit G0 = c4lpl/Epl ≈ G. Die heutigen Dimensionen und Naturkräfte entstanden in dieser Reihenfolge, haben 'komplementäre' aber gleichwertige statische und dynamische Aspekte, entsprechend ihren Termen in Bogenelement bzw. Vierervektor, aus derem Vergleich sowie mit denen ihrer Nachbarn folgen Grundgleichungen bzw. Erhaltungssätze. Jeweils individuelle Eigenschaften wie ihre Naturkonstante konkretisieren sie und tragen zu gattungsmäßigen wie globale Affinität und Äquivalenzen bei. Ältestes Gebiet oder räumlicher Rand jeder Dimension sind die ersten vom Vorgänger bewirkten Ereignisse, selbst raumzeitlicher Ursprung des Nachfolgers, dort einmalig und ewig maximal rotverschoben fortwirkend und nicht lokalisierbar, um neue Elementareinheiten verschieden und lichtartig mit deren Verhältnis oder dem ihrer globalen Zustandsgrößen als konstanten Anfangsimpuls, Expansion, Längen- oder Ereignisdichte zueinander. Der Übergang vom diskreten Modell weniger Informationen zum Kontinuum und die Korrespondenz zur Physik ist problemlos, Details wie ein kontinuierlicher, abrupter oder ganz fehlender Abfall der Metrik beim ältesten Gebiet sind aber nur durch Beobachtungen entscheidbar. Erörtert werden allgemeine und individuelle Eigenschaften und ihre Konsequenzen der Dimensionen mit ihren Kräften, selbst und im Verhältnis zueinander, etwa ihrer begrenzten

  5. Physikunterricht und Kalter Krieg

    NASA Astrophysics Data System (ADS)

    Rieß, Falk; Kremer, Armin

    Die Indienstnahme des Physikunterrichts für militaristische und politische Zwecke ist in Deutschland nichts Neues: Die Wurzeln liegen im Kaiserreich und im Faschismus ("Wehrphysik"), und die Praxis im Kalten Krieg stellt hier nichts Außergewöhnliches, sondern lediglich eine auffällige Kontinuität dar.

  6. Peak Experience Project

    ERIC Educational Resources Information Center

    Scott, Daniel G.; Evans, Jessica

    2010-01-01

    This paper emerges from the continued analysis of data collected in a series of international studies concerning Childhood Peak Experiences (CPEs) based on developments in understanding peak experiences in Maslow's hierarchy of needs initiated by Dr Edward Hoffman. Bridging from the series of studies, Canadian researchers explore collected…

  7. Peak power ratio generator

    DOEpatents

    Moyer, R.D.

    A peak power ratio generator is described for measuring, in combination with a conventional power meter, the peak power level of extremely narrow pulses in the gigahertz radio frequency bands. The present invention in a preferred embodiment utilizes a tunnel diode and a back diode combination in a detector circuit as the only high speed elements. The high speed tunnel diode provides a bistable signal and serves as a memory device of the input pulses for the remaining, slower components. A hybrid digital and analog loop maintains the peak power level of a reference channel at a known amount. Thus, by measuring the average power levels of the reference signal and the source signal, the peak power level of the source signal can be determined.

  8. Peak power ratio generator

    DOEpatents

    Moyer, Robert D.

    1985-01-01

    A peak power ratio generator is described for measuring, in combination with a conventional power meter, the peak power level of extremely narrow pulses in the gigahertz radio frequency bands. The present invention in a preferred embodiment utilizes a tunnel diode and a back diode combination in a detector circuit as the only high speed elements. The high speed tunnel diode provides a bistable signal and serves as a memory device of the input pulses for the remaining, slower components. A hybrid digital and analog loop maintains the peak power level of a reference channel at a known amount. Thus, by measuring the average power levels of the reference signal and the source signal, the peak power level of the source signal can be determined.

  9. Peak Oil, Peak Coal and Climate Change

    NASA Astrophysics Data System (ADS)

    Murray, J. W.

    2009-05-01

    Research on future climate change is driven by the family of scenarios developed for the IPCC assessment reports. These scenarios create projections of future energy demand using different story lines consisting of government policies, population projections, and economic models. None of these scenarios consider resources to be limiting. In many of these scenarios oil production is still increasing to 2100. Resource limitation (in a geological sense) is a real possibility that needs more serious consideration. The concept of 'Peak Oil' has been discussed since M. King Hubbert proposed in 1956 that US oil production would peak in 1970. His prediction was accurate. This concept is about production rate not reserves. For many oil producing countries (and all OPEC countries) reserves are closely guarded state secrets and appear to be overstated. Claims that the reserves are 'proven' cannot be independently verified. Hubbert's Linearization Model can be used to predict when half the ultimate oil will be produced and what the ultimate total cumulative production (Qt) will be. US oil production can be used as an example. This conceptual model shows that 90% of the ultimate US oil production (Qt = 225 billion barrels) will have occurred by 2011. This approach can then be used to suggest that total global production will be about 2200 billion barrels and that the half way point will be reached by about 2010. This amount is about 5 to 7 times less than assumed by the IPCC scenarios. The decline of Non-OPEC oil production appears to have started in 2004. Of the OPEC countries, only Saudi Arabia may have spare capacity, but even that is uncertain, because of lack of data transparency. The concept of 'Peak Coal' is more controversial, but even the US National Academy Report in 2007 concluded only a small fraction of previously estimated reserves in the US are actually minable reserves and that US reserves should be reassessed using modern methods. British coal production can be

  10. Geoinformation und Staat

    NASA Astrophysics Data System (ADS)

    Zypries, Brigitte

    2002-09-01

    Geoinformationen besaßen als Grundlage militärischer Interventionen schon immer einen hohen Stellenwert für den Staat. Im Zeitalter der modernen Informations- und Kommunikationstechnologien wächst in demokratischen Staaten die Bedeutung von Geodaten weit über den Verteidigungsbereich hinaus. Brigitte Zypries, Staatssekretärin im Bundesministerium des Innern (BMI) und Vorsitzende des Interministeriellen Ausschusses für Geoinformationswesen (IMAGI), sprach mit Dipl.-Geogr. Ute C. Bauerüber die Anwendung und Koordinierung von Geodaten in Politik und Staat.

  11. Roboter und Zuckerstangen

    NASA Astrophysics Data System (ADS)

    Siebert, Heike

    Bei Produktion und Logistik denkt man sofort an Fabriken, Lagerhallen und Gabelstapler und nicht unbedingt an Zellbiologie. Sieht man etwas genauer hin erscheint dieser Gedankensprung jedoch gar nicht mehr so unpassend. In einer lebenden Zelle laufen eine Vielzahl von Produktions-, Transport- und Regulationsprozessen ab. Soll etwa ein gerade verfügbarer Rohstoff abgebaut werden, muss vielleicht ein Signal ein Gen erreichen, das ein geeignetes Enzym kodiert. Die Aktivierung des Gens führt über mehrere Zwischenstationen zur Produktion des Enzyms, das schließlich noch dahin gelangen muss, wo es gebraucht wird. Ist der Bedarf gedeckt, muss wiederum die Enzymproduktion eingestellt werden.

  12. Sternbilder und ihre Mythen

    NASA Astrophysics Data System (ADS)

    Fasching, Gerhard

    Die Sternbilder, die seit alters her die Menschen in ihren Bann gezogen haben, und die damit verbundenen Mythen werden in zweifacher Weise vorgestellt. Erstens ist es die Absicht, dem Leser zu helfen, sich am Sternenhimmel zurechtzufinden, und zweitens will es ihm die Vielfalt der Bilder vermitteln, die damit verbunden sind. Am Anfang des Buches stehen die prächtigen Erzählungen aus Ovids Metamorphosen. Dann ist vom Sternenhimmel im Jahreskreis die Rede, um den Leser anzuregen, diesen fast unendlichen Bilderreichtum sich selbst durch eigene Beobachtungen zu erschließen. Ein umfangreicher Abschnitt behandelt die einzelnen Sternbilder und das hierzu überlieferte Wissen. Sternkarten und alte Kupferstiche aus dem Bestand der Österreichischen Nationalbibliothek zeigen, wie man sich in früheren Jahrhunderten den Sternenhimmel vorgestellt hat. Sternsagen und Mythen werden erzählt und auch das ptolemäische und das kopernikanische Weltsystem werden einander gegenübergestellt. Ausführliche Sachverzeichnisse mit über 3000 Suchbegriffen erleichtern den Zugang zu Stern- und Sternbildnamen und zur Mythologie.

  13. Integument und Anhangsorgane

    NASA Astrophysics Data System (ADS)

    Schliemann, Harald

    Das Integument umhüllt den Wirbeltierkörper lückenlos. In der embryonalen Mundbucht (Stomodaeum) und der Afterbucht (Proctodaeum) grenzt es an die Auskleidung des Darmrohres. Über die generelle Bedeutung einer Haut als Abgrenzung zwischen Körperinnenraum und Außenmedium hinaus hat es bei Schädeltieren ein breites Spektrum von Funktionen. Die wichtigsten sind: Mechanischer Schutz durch Verhornungen und Verknöch erungen; Wundheilung; Schutz vor Wasserverlust; Schutz vor Infektionen durch bakterizide Drüsensekrete und immunkompetente Zellen; Schutz vor kurzwelliger Strahlung durch Pigmente; Schutz vor Überwärmung durch Schweißdrüsensekrete und Schutz vor Wärmeverlust durch Federn und Haare; Ausbildung lokomotorisch wichtiger Strukturen wie Federn, Flug- und Schwimmhäute, Krallen und Hufe; Redukt ion des Strömungswiderstandes durch Dämpfungshaut; Abgabe von Sekreten zur Ernährung (Milch); Ausbildung von Strukturen zu Nahrungserwerb und_-bearbeitung, z. B. Zähne, Barten;

  14. Make peak flow a habit!

    MedlinePlus

    Asthma - make peak flow a habit; Reactive airway disease - peak flow; Bronchial asthma - peak flow ... your airways are narrowed and blocked due to asthma, your peak flow values drop. You can check ...

  15. Hale Central Peak

    NASA Technical Reports Server (NTRS)

    2004-01-01

    19 September 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows some of the mountains that make up the central peak region of Hale Crater, located near 35.8oS, 36.5oW. Dark, smooth-surfaced sand dunes are seen to be climbing up the mountainous slopes. The central peak of a crater consists of rock brought up during the impact from below the crater floor. This autumn image is illuminated from the upper left and covers an area approximately 3 km (1.9 mi) across.

  16. Impact Crater with Peak

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 14 June 2002) The Science This THEMIS visible image shows a classic example of a martian impact crater with a central peak. Central peaks are common in large, fresh craters on both Mars and the Moon. This peak formed during the extremely high-energy impact cratering event. In many martian craters the central peak has been either eroded or buried by later sedimentary processes, so the presence of a peak in this crater indicates that the crater is relatively young and has experienced little degradation. Observations of large craters on the Earth and the Moon, as well as computer modeling of the impact process, show that the central peak contains material brought from deep beneath the surface. The material exposed in these peaks will provide an excellent opportunity to study the composition of the martian interior using THEMIS multi-spectral infrared observations. The ejecta material around the crater can is well preserved, again indicating relatively little modification of this landform since its initial creation. The inner walls of this approximately 18 km diameter crater show complex slumping that likely occurred during the impact event. Since that time there has been some downslope movement of material to form the small chutes and gullies that can be seen on the inner crater wall. Small (50-100 m) mega-ripples composed of mobile material can be seen on the floor of the crater. Much of this material may have come from the walls of the crater itself, or may have been blown into the crater by the wind. The Story When a meteor smacked into the surface of Mars with extremely high energy, pow! Not only did it punch an 11-mile-wide crater in the smoother terrain, it created a central peak in the middle of the crater. This peak forms kind of on the 'rebound.' You can see this same effect if you drop a single drop of milk into a glass of milk. With craters, in the heat and fury of the impact, some of the land material can even liquefy. Central peaks like the one

  17. Katzenaugen und Sternsteine: Spielwiese

    NASA Astrophysics Data System (ADS)

    Ucke, Christian; Schlichting, Hans-Joachim

    2004-07-01

    Edelsteine vom Typ Chrysoberyll sind auch unter der Kurzbezeichnung Katzenauge bekannt. Im Chrysoberyll eingelagert sind feine, parallel angeordnete, metallisch glänzende Nadeln aus Rutil (Titandioxid). Auch Hohlkanäle und Risse durchziehen das Material. Lichtreflexion an diesen Einlagerungen und Kanälen erklärt das Lichtband, das dem Stein zu seinem Namen verhalf.

  18. PEAK READING VOLTMETER

    DOEpatents

    Dyer, A.L.

    1958-07-29

    An improvement in peak reading voltmeters is described, which provides for storing an electrical charge representative of the magnitude of a transient voltage pulse and thereafter measuring the stored charge, drawing oniy negligible energy from the storage element. The incoming voltage is rectified and stored in a condenser. The voltage of the capacitor is applied across a piezoelectric crystal between two parallel plates. Amy change in the voltage of the capacitor is reflected in a change in the dielectric constant of the crystal and the capacitance between a second pair of plates affixed to the crystal is altered. The latter capacitor forms part of the frequency determlning circuit of an oscillator and means is provided for indicating the frequency deviation which is a measure of the peak voltage applied to the voltmeter.

  19. INDIAN PEAKS WILDERNESS, COLORADO.

    USGS Publications Warehouse

    Pearson, Robert C.; Speltz, Charles N.

    1984-01-01

    The Indian Peaks Wilderness northwest of Denver is partly within the Colorado Mineral Belt, and the southeast part of it contains all the geologic characteristics associated with the several nearby mining districts. Two deposits have demonstrated mineral resources, one of copper and the other of uranium; both are surrounded by areas with probable potential. Two other areas have probable resource potential for copper, gold, and possibly molydenum. Detailed gravity and magnetic studies in the southeast part of the Indian Peaks Wilderness might detect in the subsurface igneous bodies that may be mineralized. Physical exploration such as drilling would be necessary to determine more precisely the copper resources at the Roaring Fork locality and uranium resources at Wheeler Basin.

  20. Peak of Desire

    PubMed Central

    Huang, Julie Y.; Bargh, John A.

    2008-01-01

    In three studies, we explore the existence of an evolved sensitivity to the peak as consistent with the evolutionary origins of many of our basic preferences. Activating the evolved motive of mating activates related adaptive mechanisms, including a general sensitivity to cues of growth and decay associated with determining mate value in human courtship. We establish that priming the mating goal also activates as well an evaluative bias that influences how people evaluate cues of growth. Specifically, living kinds that are immature or past their prime are devalued, whereas living kinds at their peak become increasingly valued. Study 1 establishes this goal-driven effect for human stimuli indirectly related to the mating goal. Studies 2 and 3 establish that the evaluative bias produced by the active mating goal extends to living kinds but not artifacts. PMID:18578847

  1. PEAK LIMITING AMPLIFIER

    DOEpatents

    Goldsworthy, W.W.; Robinson, J.B.

    1959-03-31

    A peak voltage amplitude limiting system adapted for use with a cascade type amplifier is described. In its detailed aspects, the invention includes an amplifier having at least a first triode tube and a second triode tube, the cathode of the second tube being connected to the anode of the first tube. A peak limiter triode tube has its control grid coupled to thc anode of the second tube and its anode connected to the cathode of the second tube. The operation of the limiter is controlled by a bias voltage source connected to the control grid of the limiter tube and the output of the system is taken from the anode of the second tube.

  2. DIAMOND PEAK WILDERNESS, OREGON.

    USGS Publications Warehouse

    Sherrod, David R.; Moyle, Phillip R.

    1984-01-01

    No metallic mineral resources were identified during a mineral survey of the Diamond Peak Wilderness in Oregon. Cinder cones within the wilderness contain substantial cinder resources, but similar deposits that are more accessible occur outside the wilderness. The area could have geothermal resources, but available data are insufficient to evaluate their potential. Several deep holes could be drilled in areas of the High Cascades outside the wilderness, from which extrapolations of the geothermal potential of the several Cascade wilderness could be made.

  3. Falten und fliegen: Papierflieger und ihre Physik

    NASA Astrophysics Data System (ADS)

    Gruber, Werner

    2004-09-01

    Mit Papierfliegern können wichtige Eigenschaften der Aerodynamik anschaulich vermittelt werden: ein Blatt Papier, ein paar Faltungen und schon kann man experimentieren. Allerdings sind beim Trimmen des Fliegers einige Punkte zu beachten. Besonders wichtig ist die Y-Stellung der Flügel, die ihm Flugstabilität verleiht. Ist der Flieger fertig, dann gilt es, die dem Modell am besten angepasste Wurftechnik herauszufinden. Dazu variiert man Wurfgeschwindigkeit und Abwurfwinkel. Den Boden kann ein Papierflieger auf vier prinzipiell verschiedenen Flugkurven erreichen: Optimal ist die Gerade, dann fliegt er am weitesten.

  4. Kitt Peak speckle camera

    NASA Technical Reports Server (NTRS)

    Breckinridge, J. B.; Mcalister, H. A.; Robinson, W. G.

    1979-01-01

    The speckle camera in regular use at Kitt Peak National Observatory since 1974 is described in detail. The design of the atmospheric dispersion compensation prisms, the use of film as a recording medium, the accuracy of double star measurements, and the next generation speckle camera are discussed. Photographs of double star speckle patterns with separations from 1.4 sec of arc to 4.7 sec of arc are shown to illustrate the quality of image formation with this camera, the effects of seeing on the patterns, and to illustrate the isoplanatic patch of the atmosphere.

  5. Messung und Analyse

    NASA Astrophysics Data System (ADS)

    Bathelt, Hartmut; Scheinhardt, Michael; Sell, Hendrik; Sottek, Roland; Guidati, Sandro; Helfer, Martin

    Für die Beurteilung von Akustik und Fahrkomfort eines Fahrzeugs gilt in der Fahrzeugentwicklung immer noch der alte Grundsatz: "Der Kunde fährt nicht am Prüfstand, sondern auf der Straße“. Daher werden Gesamtbeurteilungen des Entwicklungsstandes und Konkurrenzvergleiche (Benchmarking) nach wie vor auf der Straße durchgeführt, meist auf ausgewählten Fahrbahnen am Prüfgelände oder im Rahmen der regelmäßigen Winter- und Sommererprobungen unter extremen Witterungsverhältnissen.

  6. Getreide, Brot und Feine Backwaren

    NASA Astrophysics Data System (ADS)

    von Grabowski, Hans-Uwe; Rolfe, Birgit

    Getreide und Getreideerzeugnisse sind ebenso wie Brot und Feine Backwaren nach dem Lebensmittel- und Futtermittel-Gesetzbuch (LFGB) [1] Lebensmittel im Sinne des Artikels 2 der VO (EG) Nr. 178/2002 (BasisVO) (s. auch Kap. 1.6/2.4.1/3.2). Gesetzlich festgelegte Begriffsbestimmungen gibt es für diese Lebensmittel nicht. Man muss sich daher allgemeiner Verkehrsauffassungen bedienen, wie sie von der Deutschen Lebensmittelbuch-Kommission in Form von Leitsätzen erarbeitet und veröffentlicht wurden [2]. Der Gesundheitsschutz und der Schutz des Verbrauchers vor Täuschung sind in der Basis-VO und dem LFGB geregelt.

  7. Unternehmens- und Marktstatistik

    NASA Astrophysics Data System (ADS)

    Grömling, Michael; Scheinost, Ulrich

    Deutschland verfügt über ein gut ausgebautes System amtlicher und nicht amtlicher Unternehmens- und Marktstatistiken, das sich in einem fortwährenden Wandel befindet. Wird es sinnvoll genutzt, können für einzelne Marktteilnehmer wie für die gesamte Gesellschaft kostspielige Fehlentwicklungen vermieden werden. Dazu bedarf es eines sachkundigen Überblicks über die Vielfalt der Statistiken und der zwischen ihnen bestehenden Beziehungen sowie einer ständigen Anpassung an die wirtschaftliche Entwicklung. Als eine mögliche Orientierung kann der auf der Güter- und Faktorebene zu beobachtende Wandel dienen. Einer adäquaten Abbildung der ökonomischen Realität stehen in Deutschland mit seiner starken Verrechtlichung der Statistik jedoch mancherlei Schwierigkeiten im Wege. Teilweise tiefgreifende Reformbestrebungen sind vor allem auf europäischer Ebene im Gange. Als eine ergebnisorientierte Innovation für das Gesamtsystem der Unternehmens- und Marktstatistik wird ein modular aufgebautes System vorgestellt, das auch bei unterschiedlichen und sich wandelnden Rahmenbedingungen schrittweise realisiert werden kann.

  8. Datenintegration und Deduplizierung

    NASA Astrophysics Data System (ADS)

    Bleiholder, Jens; Schmid, Joachim

    In Unternehmen liegen viele Daten heutzutage immer seltener vollständig an einem einzigen physikalischen Ort vor, sondern sind weltweit verteilt. Dies liegt zum einen an der immer besser gewordenen Infrastruktur, die eine solche Verteilung auf einfache Art und Weise ermöglicht, und zum anderen an der Tatsache, dass viele Unternehmen weltweit tätig sind. So fallen Daten weltweit an, werden aber jeweils lokal - vor Ort - gespeichert. Daher müssen oft mehrere Datenquellen genutzt werden, um einen aktuellen, vollständigen und genauen Überblick über die vorhandenen Daten zu gewinnen. Datenintegration hilft, indem sie Daten aus mehreren Quellen zusammenführt und einheitlich darstellt. Diese integrierten Daten können genutzt werden, um sich einen Überblick über das Unternehmen zu verschaffen, z.B. wenn Unternehmen fusionieren und nur noch eine Kundendatenbank bestehen bleiben soll, oder wenn zu einem Kunden die Daten aus den verschiedenen Fachabteilungen zusammengeführt werden sollen. Anhand eines solchen Beispiels, der Integration von Kundendaten zu Kfz- und Lebensversicherungen erläutern wir im Folgenden einzelne Techniken.

  9. Geologie der terrestrischen Planeten und Monde.

    NASA Astrophysics Data System (ADS)

    Stöffler, D.

    Contents: 1. Inhalt und Aufgabe der Planetologie. 2. Aufbau des Sonnensystems. 3. Methoden der Exploration und Analyse der Planeten und Monde. 4. Geologische Grundprozesse auf den terrestrischen Planeten und Monden. 5. Geologische Formationen der planetaren Oberflächen. 6. Gesteine und Mineralien der planetaren Krusten. 7. Der innere Aufbau der terrestrischen planetaren Körper. 8. Vergleichende geologische Entwicklungsgeschichte der terrestrischen Planeten und des Mondes. 9. Ursprung und Entstehung der terrestrischen planetaren Körper.

  10. Make peak flow a habit!

    MedlinePlus

    Checking your peak flow is one of the best ways to control your asthma and to keep it from getting worse. Asthma attacks ... Most times, they build slowly. Checking your peak flow can tell you if an attack is coming, ...

  11. Patentierung und Patentlage

    NASA Astrophysics Data System (ADS)

    Herrmann, Uwe

    Gewerbliche Schutzrechte nehmen in der nationalen Rechts- und Wirtschaftsordnung sowie auch auf internationaler Ebene stetig an Bedeutung zu. Sie dienen dem Schutz geistigen Eigentums und sind für jeden Gewerbetreibenden nicht nur im Hinblick darauf von Bedeutung, eigene Rechte zu sichern, sondern auch insofern von Relevanz, dass ein Verstoß gegen Rechte Dritter zu vermeiden ist. Zu den gewerblichen Schutzrechten gehören unter anderem Kennzeichenrechte, Geschmacksmusterrechte sowie die sogenannten technischen Schutzrechte in Form des Patents sowie des Gebrauchsmusters. Die folgenden Ausführungen befassen sich ausschließlich mit den technischen Schutzrechten und geben eine kurze Einführung in die Voraussetzungen, das Entstehen und den Wegfall sowie in die Wirkungen technischer Schutzrechte. Beleuchtet wird die Situation im Wesentlichen im Hinblick auf nationale technische Schutzrechte, d. h. auf Deutsche Patente und Gebrauchsmuster sowie auf Europäische Patente, die Schutz in Deutschland entfalten. Die Möglichkeit der Erlangung von Schutzrechten im außereuropäischen Ausland wird nur am Rande gestreift.

  12. Technikwissenschaft - Erfinden und Entdecken

    NASA Astrophysics Data System (ADS)

    Linnemann, Gerhard

    Umrissen wird das allgemeine Ziel der Technikwissenschaft, konstruktiv zu verwerten und nicht-natürlich Entdeckbares zu erfinden. Wir befinden uns in einer Umwälzung der Technik im Verlauf der wissenschaftlich-technischen Revolution, auf dem Wege zu einem neuen Techniktyp. Dieser schafft und nutzt die künstliche Intelligenz. Dazu benötigt der in der Technik tätige Mensch spezielle Kenntnisse und Erfahrungen in kreativ-konstruktiver, -gestalterischer und erfinderischer Sicht mit dem Einsatz spezieller Strukturen und Sprachen. Vorschläge zur Arbeitsweise in der Technik werden gegeben.Translated AbstractTechnological Science-Invent and DiscoverThe general aim of engineering science is outlined to utilize results constructively and to invent something that cannot be discovered in nature. We are now in a period of transformation of technology in the course of scientific-technological revolution, on the way to a new type of technology. This new type creates and utilizes artificial intelligence. For this, man acitive in this field requires special knowledge and experiences in a creative, constructive, design-oriented and ultimately inventive way by deploying special structures and languages. There are also made some proposals concerning the method of working in the field of technology.

  13. Venture Kapital und Life Science

    NASA Astrophysics Data System (ADS)

    Moss, Sebastian; Beermann, Christian

    Um sich weiter im internationalen Wettbewerb behaupten zu können, müssen deutsche Unternehmen heute in Schlüsseltechnologien wie die Medizintechnik und die Biotechnologie, zusammenfassend unter dem Begriff der Life Sciences bekannt, investieren. Eine führende Wettbewerbsposition erfordert immer die konsequente Weiterentwicklung von Produkten und Lösungen, um Innovationspotenziale in medizinische Verfahren umzusetzen. Die damit unmittelbar verbundenen hohen Ausgaben für Forschung und Entwicklung stellen ein bedeutendes Problem junger Life Science Unternehmen dar. Vor allem die, verglichen mit nicht-medizinischen Branchen, längeren Forschungs- und Entwicklungszyklen in der Frühphase eines Life Science Unternehmens und die längere Dauer bis zur Profitabilität erhöhen das Risiko der Finanzinvestoren. Die Zeitdauer, um ein medizinisches Produkt bis zur Marktreife zu entwickeln und letztlich auf dem Markt anzubieten, kann aufgrund der notwendigen intensiven Forschung nur unscharf geplant werden und erhöht die Unsicherheit über den Zeitpunkt der ersten Einnahmen. Damit verschärfen sich gerade im Life Science Bereich allgemeine Problematiken von Gründungs- und Wachstumsfinanzierungen wie starke Informationsasymmetrien zwischen Gründer und potentiellen Kapitalgebern. Oftmals ist die Entwicklung einer innovativen Technologie abhängig von einzelnen Personen, von deren Wissen und Engagement die Umsetzung und der Erfolg eines gesamten Produktkonzeptes abhängen.

  14. Decoupling approximation design using the peak to peak gain

    NASA Astrophysics Data System (ADS)

    Sultan, Cornel

    2013-04-01

    Linear system design for accurate decoupling approximation is examined using the peak to peak gain of the error system. The design problem consists in finding values of system parameters to ensure that this gain is small. For this purpose a computationally inexpensive upper bound on the peak to peak gain, namely the star norm, is minimized using a stochastic method. Examples of the methodology's application to tensegrity structures design are presented. Connections between the accuracy of the approximation, the damping matrix, and the natural frequencies of the system are examined, as well as decoupling in the context of open and closed loop control.

  15. Kometen und Asteroiden

    NASA Astrophysics Data System (ADS)

    Borgeest, Ulf; Staude, Jakob; Hahn, Gerhard; Harris, Alan W.; Jaumann, Ralf; Köhler, Ulrich; Kührt, Ekkehard; Schulz, Rita; Neukum, Gerhard; Arnold, Gabriele; Keller, Horst Uwe; Denk, Tilmann; Müller, Thomas; Wulff, André; Maruhn, Nicolaus; Fischer, Daniel; Trieloff, Mario; Althaus, Tilmann

    Contents: Die Kleinkörper des Sonnensystems. Kern, Koma und Schweife. Ziele der Planetenforschung. ROSETTA: Naherkundung von Kometen. Asteroiden: Trümmer aus planetarer Urzeit. Kleinkörper im Infrarotweltall. Selbs beobachten! Apocalypse - not now! Meteoriten - Boten aus der Urzeit des Sonnensystems.

  16. Tipps und Tricks

    NASA Astrophysics Data System (ADS)

    Häger, Wolfgang; Bauermeister, Dirk

    Hier wollen wir einige uns nützlich erscheinende Hinweise zur Arbeit mit dem Inventor geben. Dabei geht es vor allem darum, das Arbeiten mit dem Inventor zu vereinfachen. Die Beispiele stellen eine unvollständige Aufzählung dar und sollen dazu anregen, nach alternativen Vorgehensweisen zu suchen (hier sei noch einmal ausdrücklich auf das Internet verwiesen).

  17. Arbeitsgestaltung und Mitarbeiterqualifizierung

    NASA Astrophysics Data System (ADS)

    Weiss-Oberdorfer, Werner; Hörner, Barbara; Holm, Ruth; Pirner, Evelin

    Die Wertkette gliedert ein Unternehmen in strategisch relevante Tätigkeiten, um dadurch Kostenverhalten sowie vorhandene und potenzielle Differenzierungsquellen zu verstehen. Wenn ein Unternehmen diese strategisch wichtigen Aktivitäten billiger oder besser als seine Konkurrenten erledigt, verschafft es sich einen Wettbewerbsvorteil." Michael Porter, 1985

  18. Wirkstoffe, Medikamente und Mathematische Bildverarbeitung

    NASA Astrophysics Data System (ADS)

    Bauer, Günter J.; Lorenz, Dirk A.; Maaß, Peter; Preckel, Hartwig; Trede, Dennis

    Die Entwicklung neuer Medikamente ist langwierig und teuer. Der erste Schritt ist hierbei die Suche nach neuen Wirkstoffkandidaten, die für die Behandlung bislang schwer therapierbarer Krankheiten geeignet sind. Hierfür stehen der Pharma- und Biotechnologieindustrie riesige Substanzbibliotheken zur Verfügung. In diesen Bibliotheken werden die unterschiedlichsten Substanzen gesammelt, die entweder synthetisch hergestellt oder aus Pilzen, Bakterienkulturen und anderen Lebewesen gewonnen werden können.

  19. How to use your peak flow meter

    MedlinePlus

    Peak flow meter - how to use; Asthma - peak flow meter; Reactive airway disease - peak flow meter; Bronchial asthma - peak flow meter ... your airways are narrowed and blocked due to asthma, your peak flow values drop. You can check ...

  20. ...und Einstein hatte doch recht

    NASA Astrophysics Data System (ADS)

    Will, Clifford M.; Leuchs, Anne; Leuchs, Gerd

    Keine wissenschaftliche Theorie ist auf solche Faszination auch außerhalb der Wissenschaft gestoßen wie die Allgemeine Relativitätstheorie von Albert Einstein, und keine wurde so nachdrücklich mit den Mitteln der modernen Physik überprüft. Wie hat sie diesen Test mit Raumsonden, Radioastronomie, Atomuhren und Supercomputern standgehalten? Hatte Einstein recht? Mit der Autorität des Fachmanns und dem Flair des unvoreingenommenen Erzählers schildert Clifford Will die Menschen, Ideen und Maschinen hinter den Tests der allgemeinen Relativitätstheorie. Ohne Formeln und Fachjargon wird der leser mit Einsteins Gedanken vertraut und erfährt von der Bestätigung seiner Vorhersagen, angefangen bei der Lichtablenkung im Schwerefeld der Sonne 1919 bis zu den ausgefeilten Kreiselexperimenten auf dem Space Shuttle. Die Allgemeine Relativitätstheorie hat nich nur alle diese Tests bestanden, sie hat darüber hinaus wesentlich beigetragen zu unserem Verständnis von Phänomenen wie Pulsaren, Quasaren, Schwarzen Löchern und Gravitationslinsen. Dieses Buch erzählt lebendig und spannend die Geschichte einer der größten geistigen Leistungen unserer Zeit.

  1. Pyropheophorbide und a as a catabolite of ethylene-induced chlorophyll und a degradation

    SciTech Connect

    Shimokawa, Keishi; Hashizume, Akihito ); Shioi, Yuzo )

    1990-05-01

    An enzyme extract prepared from ethylene-induced degreening Citrus fruits contains chlorophyll (Chl) degrading enzymes. The fate of Chl carbons during an enzymatic degradation was investigated using Chl {und a}-{sup 14}C. Accompanying the disappearance of labelled Chl {und a}, pheophorbide {und a} and pyropheophorbide {und a} appeared and accumulation of pyropheophorbide {und a} was observed. HydroxyChl {und a} was also detected, but this is thought to be an artifact during chromatography. Unlike ethylene-induced Citrus fruits (in vivo), further degradation of pyropheophorbide {und a} did not occur in vitro enzyme system. This suggests that there is a lack of enzyme(s) and/or cofactor(s) for further degradation. It is concluded that Chl {und a} degraded enzymatically by the following order: Chl {und a}, chlorophyllide {und a}, pheophorbide {und a} and pyropheophorbide {und a}.

  2. Two classes of speculative peaks

    NASA Astrophysics Data System (ADS)

    Roehner, Bertrand M.

    2001-10-01

    Speculation not only occurs in financial markets but also in numerous other markets, e.g. commodities, real estate, collectibles, and so on. Such speculative movements result in price peaks which share many common characteristics: same order of magnitude of duration with respect to amplitude, same shape (the so-called sharp-peak pattern). Such similarities suggest (at least as a first approximation) a common speculative behavior. However, a closer examination shows that in fact there are (at least) two distinct classes of speculative peaks. For the first, referred to as class U, (i) the amplitude of the peak is negatively correlated with the price at the start of the peak (ii) the ensemble coefficient of variation exhibits a trough. Opposite results are observed for the second class that we refer to as class S. Once these empirical observations have been made we try to understand how they should be interpreted. First, we show that the two properties are in fact related in the sense that the second is a consequence of the first. Secondly, by listing a number of cases belonging to each class we observe that the markets in the S-class offer collection of items from which investors can select those they prefer. On the contrary, U-markets consist of undifferentiated products for which a selection cannot be made in the same way. All prices considered in the paper are real (i.e., deflated) prices.

  3. Hubbert's Peak: A Physicist's View

    NASA Astrophysics Data System (ADS)

    McDonald, Richard

    2011-11-01

    Oil and its by-products, as used in manufacturing, agriculture, and transportation, are the lifeblood of today's 7 billion-person population and our 65T world economy. Despite this importance, estimates of future oil production seem dominated by wishful thinking rather than quantitative analysis. Better studies are needed. In 1956, Dr. M.King Hubbert proposed a theory of resource production and applied it successfully to predict peak U.S. oil production in 1970. Thus, the peak of oil production is referred to as ``Hubbert's Peak.'' Prof. Al Bartlett extended this work in publications and lectures on population and oil. Both Hubbert and Bartlett place peak world oil production at a similar time, essentially now. This paper extends this line of work to include analyses of individual countries, inclusion of multiple Gaussian peaks, and analysis of reserves data. While this is not strictly a predictive theory, we will demonstrate a ``closed'' story connecting production, oil-in-place, and reserves. This gives us the ``most likely'' estimate of future oil availability. Finally, we will comment on synthetic oil and the possibility of carbon-neutral synthetic oil for a sustainable future.

  4. Stochastic acceleration in peaked spectrum

    SciTech Connect

    Zasenko, V.; Zagorodny, A.; Weiland, J.

    2005-06-15

    Diffusion in velocity space of test particles undergoing external random electric fields with spectra varying from low intensive and broad to high intensive and narrow (peaked) is considered. It is shown that to achieve consistency between simulation and prediction of the microscopic model, which is reduced to Fokker-Planck-type equation, it is necessary, in the case of peaked spectrum, to account for temporal variation of diffusion coefficient occurring in the early stage. An analytical approximation for the solution of the Fokker-Planck equation with a time and velocity dependent diffusion coefficients is proposed.

  5. Peak finding using biorthogonal wavelets

    SciTech Connect

    Tan, C.Y.

    2000-02-01

    The authors show in this paper how they can find the peaks in the input data if the underlying signal is a sum of Lorentzians. In order to project the data into a space of Lorentzian like functions, they show explicitly the construction of scaling functions which look like Lorentzians. From this construction, they can calculate the biorthogonal filter coefficients for both the analysis and synthesis functions. They then compare their biorthogonal wavelets to the FBI (Federal Bureau of Investigations) wavelets when used for peak finding in noisy data. They will show that in this instance, their filters perform much better than the FBI wavelets.

  6. Measuring Your Peak Flow Rate

    MedlinePlus

    ... meter. Proper cleaning with mild detergent in hot water will keep your peak flow meter working accurately and may keep you healthier. Related Content News: American Lung Association Applauds EPA’s Update to Cross-State Air Pollution Rule News: American Lung Association Invests More Than $ ...

  7. Peak Stress Testing Protocol Framework

    EPA Science Inventory

    Treatment of peak flows during wet weather is a common challenge across the country for municipal wastewater utilities with separate and/or combined sewer systems. Increases in wastewater flow resulting from infiltration and inflow (I/I) during wet weather events can result in op...

  8. Hubbert's Peak -- A Physicist's View

    NASA Astrophysics Data System (ADS)

    McDonald, Richard

    2011-04-01

    Oil, as used in agriculture and transportation, is the lifeblood of modern society. It is finite in quantity and will someday be exhausted. In 1956, Hubbert proposed a theory of resource production and applied it successfully to predict peak U.S. oil production in 1970. Bartlett extended this work in publications and lectures on the finite nature of oil and its production peak and depletion. Both Hubbert and Bartlett place peak world oil production at a similar time, essentially now. Central to these analyses are estimates of total ``oil in place'' obtained from engineering studies of oil reservoirs as this quantity determines the area under the Hubbert's Peak. Knowing the production history and the total oil in place allows us to make estimates of reserves, and therefore future oil availability. We will then examine reserves data for various countries, in particular OPEC countries, and see if these data tell us anything about the future availability of oil. Finally, we will comment on synthetic oil and the possibility of carbon-neutral synthetic oil for a sustainable future.

  9. Beschallungstechnik, Beschallungsplanung und Simulation

    NASA Astrophysics Data System (ADS)

    Ahnert, Wolfgang; Goertz, Anselm

    Die primäre Aufgabe einer Lautsprecheranlage ist es, Musik, Sprache oder auch Signaltöne und Geräusche wiederzugeben. Diese können von einem Tonträger kommen (CD, Sprachspeicher), von einem anderen Ort übertragen (Zuspielung über Radio, TV, Telefon) oder vor Ort erzeugt werden. Letzteres umfasst Konzerte, Ansprachen, Durchsagen oder künstlerische Darbietungen, bei denen es meist darum geht, eine bereits vorhandene Quelle einer größeren oder weiter verteilten Anzahl von Personen zugänglich zu machen.

  10. METHOD OF PEAK CURRENT MEASUREMENT

    DOEpatents

    Baker, G.E.

    1959-01-20

    The measurement and recording of peak electrical currents are described, and a method for utilizing the magnetic field of the current to erase a portion of an alternating constant frequency and amplitude signal from a magnetic mediums such as a magnetic tapes is presented. A portion of the flux from the current carrying conductor is concentrated into a magnetic path of defined area on the tape. After the current has been recorded, the tape is played back. The amplitude of the signal from the portion of the tape immediately adjacent the defined flux area and the amplitude of the signal from the portion of the tape within the area are compared with the amplitude of the signal from an unerased portion of the tape to determine the percentage of signal erasure, and thereby obtain the peak value of currents flowing in the conductor.

  11. SPANISH PEAKS PRIMITIVE AREA, MONTANA.

    USGS Publications Warehouse

    Calkins, James A.; Pattee, Eldon C.

    1984-01-01

    A mineral survey of the Spanish Peaks Primitive Area, Montana, disclosed a small low-grade deposit of demonstrated chromite and asbestos resources. The chances for discovery of additional chrome resources are uncertain and the area has little promise for the occurrence of other mineral or energy resources. A reevaluation, sampling at depth, and testing for possible extensions of the Table Mountain asbestos and chromium deposit should be undertaken in the light of recent interpretations regarding its geologic setting.

  12. Renaturierung und Management von Heiden

    NASA Astrophysics Data System (ADS)

    Härdtle, Werner; Assmann, Thorsten; van Diggelen, Rudy; von Oheimb, Goddert

    Heiden zählen zu den ältesten und besonders reizvollen Kulturlandschaften Nordwesteuropas. Sie sind bezeichnend für nährstoffarme Böden in wintermilden Gebieten mit hohen Sommerniederschlägen. Während Heiden vor wenigen Jahrhunderten noch weit verbreitet und für manche Landschaften sogar prägend waren, hat sich ihr Areal heute auf wenige, meist in Naturschutzgebieten gelegene Restbestände verkleinert. Zu diesem Rückgang haben maßgeblich Änderungen der Landnutzung, aber auch Nährstoffeinträge aus umgebenden Agrarflächen und atmogene Depositionen beigetragen. In den meisten Ländern der Europäischen Union sind Heiden heute gesetzlich geschützte Ökosysteme, da diese, neben ihrem Erholungswert für den Menschen, Pflanzen- und Tierarten beherbergen, die außerhalb von Heiden nicht oder kaum überlebensfähig sind.

  13. The Sacramento Peak fast microphotometer

    NASA Technical Reports Server (NTRS)

    Arrambide, M. R.; Dunn, R. B.; Healy, A. W.; Porter, R.; Widener, A. L.; November, L. J.; Spence, G. E.

    1984-01-01

    The Sacramento Peak Observatory Fast Microphotometer translates an optical system that includes a laser and photodiode detector across the film to scan the Y direction. A stepping motor moves the film gate in the X direction. This arrangement affords high positional accuracy, low noise (0.002 RMS density units), modest speed (5000 points/second), large dynamic range (4.5 density units), high stability (0.005 density units), and low scattered light. The Fast Microphotometer is interfaced to the host computer by a 6502 microprocessor.

  14. Solar investigation at Terskol Peak

    NASA Astrophysics Data System (ADS)

    Burlov-Vasiljev, K. A.; Vasiljeva, I. E.

    2003-04-01

    During 1980--1990 regular observations of the solar disk spectrum and active solar structures were carried out with SEF-1 and ATsU-26 telescopes at Terskol Peak in the framework of the program ``Energy distribution in the solar spectrum in absolute energy units''. In order to refine the fine structure of telluric lines, observations with ATsU-26 telescope were carried out in parallel. This telescope was also used for the investigation of the solar active structures. In this paper the observational technique is described. The obtained results and energy distribution in the solar disk center in absolute energy units are presented.

  15. GRANITE PEAK ROADLESS AREA, CALIFORNIA.

    USGS Publications Warehouse

    Huber, Donald F.; Thurber, Horace K.

    1984-01-01

    The Granite Peak Roadless Area occupies an area of about 5 sq mi in the southern part of the Trinity Alps of the Klamath Mountains, about 12 mi north-northeast of Weaverville, California. Rock and stream-sediment samples were analyzed. All streams draining the roadless area were sampled and representative samples of the rock types in the area were collected. Background values were established for each element and anomalous values were examined within their geologic settings and evaluated for their significance. On the basis of mineral surveys there seems little likelihood for the occurrence of mineral or energy resources.

  16. Maxometers (peak wind speed anemometers)

    NASA Technical Reports Server (NTRS)

    Kaufman, J. W.; Camp, D. W.; Turner, R. E. (Inventor)

    1973-01-01

    An instrument for measuring peak wind speeds under severe environmental conditions is described, comprising an elongated cylinder housed in an outer casing. The cylinder contains a piston attached to a longitudinally movable guided rod having a pressure disk mounted on one projecting end. Wind pressure against the pressure disk depresses the movable rod. When the wind reaches its maximum speed, the rod is locked by a ball clutch mechanism in the position of maximum inward movement. Thereafter maximum wind speed or pressure readings may be taken from calibrated indexing means.

  17. Ressourceneinsatzplanung In der Energie- und Verfahrenstechnik

    NASA Astrophysics Data System (ADS)

    Engell, Sebastian; Handschin, Edmund; Rehtanz, Christian; Schultz, Rüdiger

    Der ökologisch nachhaltige, wirtschaftlich effiziente und politisch faire Umgang mit den Ressourcen der Erde ist eine der größten Herausforderungen an die Menschheit im 21. Jahrhundert und impliziert Paradigmenwechsel in allen Bereichen des gesellschaftlichen Lebens. Energie- und Verfahrenstechnik sind traditionell Bereiche, in denen der optimale Umgang mit kostbaren und beschränkt verfügbaren Ressourcen von erstrangiger Bedeutung ist. Zur Lösung der damit verbundenen komplexen Entscheidungsprobleme sind mathematische Methoden schon seit längerem im Einsatz. Hierbei können aber noch längst nicht alle bislang aufgetretenen Probleme fundiert angegangen werden. Der wachsende wirtschaftliche und ökologische Druck auf die Effizienz der Produktions-und Versorgungssysteme sowie stärkere Schwankungen von Angebot und Nachfrage führen zu neuen Herausforderungen, für die neue mathematische Methoden und Algorithmen entwickelt werden müssen.

  18. Welt und Wirkungsprinzip (2nd Aufl.)

    NASA Astrophysics Data System (ADS)

    Landgraf, Werner

    2010-03-01

    Modell einer kausalen Bewirkung der Welt, und logische, geometrische, physikalische Interprätation dieser Kausalmenge und Fortwirkung der frühsten ihrer sukzessiv als echt Neues bewirkten und durch Vorhandenes oder Späteres nicht darstellbaren oder widerrufbaren Ereignisse als Dimensionen und sie verkörpernde primäre Naturkräfte, mit Korrespondenz zur beobachteten Welt und ihrer grundlegendsten Eigenschaften. Wirklich ist nur was wirkt, wo und wie. Entsprechend ist im Bogenelement statt der Eigenzeit die variante Anzahl Wirkungen relevant, 0 ≈ 1/h2 dS2 - 1/tpl2 (dt2 - 1/c2 {dq12 + G02/G2 [dq2,32 - ...]}) mit G0 = c4lpl/Epl ≈ G. Die heutigen Dimensionen und Naturkräfte entstanden in dieser Reihenfolge, haben 'komplementäre' aber gleichwertige statische und dynamische Aspekte, entsprechend ihren Termen in Bogenelement bzw. Vierervektor, aus derem Vergleich sowie mit denen ihrer Nachbarn folgen Grundgleichungen bzw. Erhaltungssätze. Jeweils individuelle Eigenschaften wie ihre Naturkonstante konkretisieren sie und tragen zu gattungsmäßigen wie globale Affinität und Äquivalenzen bei. Ältestes Gebiet oder räumlicher Rand jeder Dimension sind die ersten vom Vorgänger bewirkten Ereignisse, selbst raumzeitlicher Ursprung des Nachfolgers, dort einmalig und ewig maximal rotverschoben fortwirkend und nicht lokalisierbar, um neue Elementareinheiten verschieden und lichtartig mit deren Verhältnis oder dem ihrer globalen Zustandsgrößen als konstanten Anfangsimpuls, Expansion, Längen- oder Ereignisdichte zueinander. Der Übergang vom diskreten Modell weniger Informationen zum Kontinuum und die Korrespondenz zur Physik ist problemlos, Details wie ein kontinuierlicher, abrupter oder ganz fehlender Abfall der Metrik beim ältesten Gebiet sind aber nur durch Beobachtungen entscheidbar. Erörtert werden allgemeine und individuelle Eigenschaften und ihre Konsequenzen der Dimensionen mit ihren Kräften, selbst und im Verhältnis zueinander, etwa ihrer begrenzten

  19. [Evidenzbasierte Leitlinien, Anspruch und Wirklichkeit].

    PubMed

    Gutsch, Johannes; Reif, Marcus; Müller-Hübenthal, Boris; Matthiessen, Peter F

    2016-01-01

    Mit der Konzeption der «Evidenzbasierten Medizin» und den «Evidenzbasierten Leitlinien» soll mithilfe von Formalisierungsprozeduren die ärztliche Irrtumsanfälligkeit kalkulierbar gemacht werden. Quantifizierte objektive Aussagen über die therapeutische Wirksamkeit einer Behandlung sollen die individuelle ärztliche Beurteilung der therapeutischen Wirksamkeit überflüssig machen. Damit kommt der Befolgung von formalen Regeln die entscheidende Rolle bei der Beantwortung der Frage nach dem Wahrheitsgehalt und dem Wirklichkeitsbezug zu. Im Rahmen evidenzbasierter Leitlinien werden vorrangig die Ergebnisse randomisierter kontrollierter Studien (RCT) oder Meta-Analysen solcher Studien herangezogen. Am Beispiel der S3-Leitlinie «Malignes Melanom» wird hier eine evidenzbasierte Urteilsbildung zur Wirksamkeit einer unkonventionellen Therapie - hier mit einem Mistelpräparat - analytisch nachvollzogen. Die für die Beurteilung dieser unkonventionellen Therapie herangezogene randomisierte Studie wird genauer methodisch analysiert. Obwohl sie keine statistisch basierte Aussage zulässt, wurde eine Leitlinienempfehlung auf Basis dieser Studie abgeleitet. Es wird gezeigt, dass 1) allein die Existenz einer einzigen RCT mit hoher Evidenz gleichgesetzt wird, 2) die Ergebnisse trotz beträchtlicher Fehlinterpretationen in eine S3-Leitlinie einfließen und 3) Meinungen anstelle kritischer wissenschaftlicher Analysen verarbeitet werden. Unsere Untersuchung zeigt, dass noch so ausgefeilte epistemologische und methodologische Formalien den Arzt nicht von der Pflicht entbinden, auf Basis seiner ärztlichen Erfahrung und professionellen Kompetenz den Realitätswert der ihm zur Verfügung stehenden Information zu beurteilen. PMID:27161555

  20. [Vegetarische und vegane Ernährung bei Kindern - Stand der Forschung und Forschungsbedarf].

    PubMed

    Keller, Markus; Müller, Stine

    2016-01-01

    Die Praxis vegetarischer Ernährungsformen ist in Deutschland im letzten Jahrzehnt deutlich angestiegen. Allerdings ist der Anteil vegetarischer und veganer Kinder dabei unbekannt. Studien mit Erwachsenen zeigen das präventive Potenzial, aber auch potenzielle Schwachstellen pflanzenbasierter Kostformen. Die Vorteile und Risiken einer vegetarischen bzw. veganen Ernährung im Kindesalter wurden bisher jedoch relativ selten untersucht. Außerdem lassen das unterschiedliche Alter der Kinder, das heterogene Studiendesign sowie die teilweise geringe Probandenzahl der Studien keine verbindlichen Aussagen zu. In dieser Übersichtsarbeit werden die Ergebnisse der wenigen Studien zu vegetarisch und vegan ernährten Kindern (< 12 Jahren) in Nordamerika und Europa zusammengefasst. Demnach lag die Zufuhr von Nahrungsenergie und Makronährstoffen vegetarischer und veganer Kinder meist näher an den Empfehlungen der Fachgesellschaften als die Ernährung gleichaltriger Mischkostkinder. Ebenso wiesen vegetarisch und vegan ernährte Kinder eine höhere Zufuhr von und bessere Versorgung mit verschiedenen Vitaminen und Mineralstoffen auf. Häufiger zeigten sich jedoch Defizite bei Vitamin B12, Zink, Kalzium, Eisen und Vitamin D. Das Wachstum und die Entwicklung vegetarisch und vegan ernährter Kinder entsprachen weitgehend den Referenzstandards, wobei sie dazu tendierten, leichter, schlanker und (< 5 Jahren) auch kleiner zu sein. Aufgrund der unzureichenden Studienlage besteht erheblicher Forschungsbedarf zu den Auswirkungen einer vegetarischen und veganen Ernährung im Kindesalter. PMID:27160086

  1. Peak load management: Potential options

    SciTech Connect

    Englin, J.E.; De Steese, J.G.; Schultz, R.W.; Kellogg, M.A.

    1989-10-01

    This report reviews options that may be alternatives to transmission construction (ATT) applicable both generally and at specific locations in the service area of the Bonneville Power Administration (BPA). Some of these options have potential as specific alternatives to the Shelton-Fairmount 230-kV Reinforcement Project, which is the focus of this study. A listing of 31 peak load management (PLM) options is included. Estimated costs and normalized hourly load shapes, corresponding to the respective base load and controlled load cases, are considered for 15 of the above options. A summary page is presented for each of these options, grouped with respect to its applicability in the residential, commercial, industrial, and agricultural sectors. The report contains comments on PLM measures for which load shape management characteristics are not yet available. These comments address the potential relevance of the options and the possible difficulty that may be encountered in characterizing their value should be of interest in this investigation. The report also identifies options that could improve the efficiency of the three customer utility distribution systems supplied by the Shelton-Fairmount Reinforcement Project. Potential cogeneration options in the Olympic Peninsula are also discussed. These discussions focus on the options that appear to be most promising on the Olympic Peninsula. Finally, a short list of options is recommended for investigation in the next phase of this study. 9 refs., 24 tabs.

  2. Restaurierung von Seen und Renaturierung von Seeufern

    NASA Astrophysics Data System (ADS)

    Grüneberg, Björn; Ostendorp, Wolfgang; Leßmann, Dieter; Wauer, Gerlinde; Nixdorf, Brigitte

    Süßwasserseen haben als ökosysteme und Lebensraum für Pflanzen und Tiere eine herausragende Bedeutung für die Artenvielfalt auf der Erde und prägen als Landschaftselemente unsere natürliche Umwelt. Seen fungieren als natürliche Stoffsenken, vor allem für Kohlenstoff und Nährstoffe, aber auch als Senken für in ihren Einzugsgebieten emittierte gelöste und feste Schadstoffe. Darüber hinaus ist Wasser eine wichtige Naturressource. Süßwasserseen stellen in den meisten Regionen der Erde lebenswichtige Quellen für die Versorgung mit Trinkwasser und tierischem Eiweiß (Fischfang) dar. Sie dienen als Wasserspeicher für die landwirtschaftliche und industrielle Nutzung. Auch für Erholungsaktivitäten des Menschen kommt ihnen eine große Bedeutung zu.

  3. Bewegungsapparat: Postcraniales Skelett und Muskulatur

    NASA Astrophysics Data System (ADS)

    Fischer, Martin S.

    Der Bewegungsapparat bestimmt die Form des Wirbeltierkörpers. So lässt sich z. B. aus der Gestalt eines Fisches auf seine bevorzugt e Schwimmweise schließen (S. 61). Bei den aquatisch en Schädeltieren dominiert die Fortbewegung mit axialem Antrieb; bei den meisten Tetrapoda findet sich eine Kombination aus axialem Antrieb und Bewegung durch Gliedmaßen. Selbst beim höchst spezialisierten Gang, der bipeden Bewegung des Menschen, sind Torsionsbewegungen des Rumpfes noch maßgeblich und bestimmen auch die Grundform des menschlichen Körpers (z. B. die Taille). Obwohl die verschiedenen Antriebsmechanismen eine funktionelle Einheit bilden, werden im Folgenden das Axialskelett sowie der Schulter- und Beckengürtel mit den zugehörigen Extremitäten getrennt besprochen.

  4. Determination of peak expiratory flow.

    PubMed

    Kano, S; Burton, D L; Lanteri, C J; Sly, P D

    1993-10-01

    It is still unknown whether peak expiratory flow (PEF) is determined by "wave speed" flow limitation in the airways. To investigate the influences of airway mechanical properties on PEF, five healthy adults performed maximal forced expiratory effort (MFEE) manoeuvres, in the standard manner and following breathholds at total lung capacity (TLC) of 2 s and 10 s. Oesophageal pressure (Poes) was measured as an index of respiratory effort. Subjects also performed a MFEE following a 10 s breathhold during which intrathoracic pressure was voluntarily raised by a Valsalva manoeuvre, which would increase transmural pressure and cross-sectional area of the extrathoracic airway. Additional MFEEs were performed with the neck fully flexed and extended, to change longitudinal tracheal tension. In separate studies, PEF was measured with a spirometer and with a pneumotachograph. Breathholds at TLC (2 s and 10 s), and neck flexion reduced PEF by a mean of 9.8% (SD 2.9%), 9.6% (SD 1.6%), and 8.7% (SD 2.8%), respectively, when measured with the spirometer. The same pattern of results was seen when measured with the pneumotachograph. These reductions occurred despite similar respiratory effort. Voluntarily raising intrathoracic pressure during a 10 s breathhold did not reverse a fall in PEF. MFEE manoeuvre with neck extension did not result in an increase in PEF, the group mean % changes being -3.0% (SD 5.0%). We conclude that these results do not allow the hypothesis that "wave-speed" (Vws) is reached at PEF to be rejected. A breathhold at TLC could increase airway wall compliance by allowing stress-relaxation of the airway, thus reducing the "Vws" achievable. PMID:8287953

  5. Lineare und verzweigte Blockcopolymere aus Polypeptiden und synthetischen Polymeren

    NASA Astrophysics Data System (ADS)

    Kukula, Hildegard

    2001-07-01

    Die vorliegende Arbeit beschäftigt sich mit der Synthese und den Eigenschaften von linearen und verzweigten amphiphilen Polypeptid-Blockcopolymeren. Die Frage nach dem Einfluss der Topologie und Konformation der Blockcopolymere auf die supramolekularen und kolloidalen Eigenschaften bildete einen wichtigen Aspekt bei den Untersuchungen. Die Blockcopolymere wurden nach einem mehrstufigen Reaktionsschema durch Kombination von anionischer und ringöffnender Polymerisation von Aminosäuren-N-Carboxyanhydriden (NCA) synthetisiert. Die Untersuchung der Polypeptid-Blockcopolymere hinsichtlich ihres Aggregationsverhaltens in fester Phase sowie in verdünnter wässriger Lösung erfolgte mittels Streumethoden (SAXS, WAXS, DLS) sowie abbildender Methoden (TEM). Durch Einsatz der Blockcopolymere als polymere Stabilisatoren in der Emulsionspolymerisation wurden Oberflächen funktionalisierte Latizes erhalten. Als Beispiel für eine pharmazeutische Anwendung wurden bioverträgliche Polypeptid-Blockcopolymere als Wirkstoff-Trägersysteme in der Krebstherapie eingesetzt. This work describes the synthesis and characterization of linear and branched polypeptide block copolymers having amphiphilic character. The studies focused on the impact of the block copolymers' conformation and architecture on the supramolecular and colloidal properties. The polypeptide block copolymers were prepared in a multi-step process involving the anionic synthesis of (poly)amino-functional polymers (polystyrene and polybutadiene) which where used as macroinitiators for the ring-opening polymerization of N-carboxyanhydrides (NCA) of protected a-aminoacids. Supramolecular structures of the block copolymers in the solid state as well as in diluted aqueous solution were investigated using scattering (SAXS, WAXS, DLS) and microscopic (TEM) methods. Both linear and branched polypeptide block copolymers were used as polymeric stabilizers in the emulsion polymerization of styrene to yield polypeptide

  6. Peak Ring Craters and Multiring Basins

    NASA Astrophysics Data System (ADS)

    Melosh, H. J.

    2015-09-01

    Understanding of the mechanics of peak-ring crater and basin formation has expanded greatly due to the high precision data on lunar gravity from GRAIL. Peak rings coincide with the edges of underlying mantle uplifts on the Moon.

  7. Dynamische Motorvermessung mit verschiedenen Methoden und Modellen

    NASA Astrophysics Data System (ADS)

    Schreiber, Alexander

    Die stark zunehmenden gesetzlichen und wirtschaftlichen Vorgaben zur Senkung von Kraftstoffverbrauch und Abgasemissionen stellen große Anforderungen an die weitere Entwicklung von Benzin- und Dieselmotoren. Hierbei sind grundlegende Fortschritte durch Konstruktion und auslegungsbedingte Maßnahmen im Bereich der Einspritzung, Gemischaufbereitung, Aufladung, Brennverfahren und Abgasnachbehandlung zu erreichen. Ein wesentlicher Teil dieser Verbesserungen wird jedoch durch eine Zunahme von Variabilitäten erreicht wie z.B. verstellbaren Vor-, Haupt- und Nacheinspritzungen, variablem Raildruck, variablen Nockenwellensteuerwinkeln, Ventilhüben, Drall-/Tumbleklappen sowie verstellbaren Abgasturbinen, Abgasrückführströmen und Abgasnachbehandlungssystemen. Dadurch steigt die Zahl der Stellglieder (Aktoren) stark an. Hinzu kommen zusätzliche Sensoren wie z.B. für Luftzahl, NOx, Brennraumdruck, Abgastemperatur und Abgasdruck. Deshalb nimmt der Umfang der Steuerungs-, Regelungs- und Diagnosefunktionen in der Motorelektronik (ECU) stark zu. Bild 7-1 zeigt als Beispiel den Signalfluss für die gesteuerten und geregelten Größen eines Dieselmotors in einer beispielhaften Prüfstandsumgebung.

  8. Peak-flow characteristics of Virginia streams

    USGS Publications Warehouse

    Austin, Samuel H.; Krstolic, Jennifer L.; Wiegand, Ute

    2011-01-01

    Peak-flow annual exceedance probabilities, also called probability-percent chance flow estimates, and regional regression equations are provided describing the peak-flow characteristics of Virginia streams. Statistical methods are used to evaluate peak-flow data. Analysis of Virginia peak-flow data collected from 1895 through 2007 is summarized. Methods are provided for estimating unregulated peak flow of gaged and ungaged streams. Station peak-flow characteristics identified by fitting the logarithms of annual peak flows to a Log Pearson Type III frequency distribution yield annual exceedance probabilities of 0.5, 0.4292, 0.2, 0.1, 0.04, 0.02, 0.01, 0.005, and 0.002 for 476 streamgaging stations. Stream basin characteristics computed using spatial data and a geographic information system are used as explanatory variables in regional regression model equations for six physiographic regions to estimate regional annual exceedance probabilities at gaged and ungaged sites. Weighted peak-flow values that combine annual exceedance probabilities computed from gaging station data and from regional regression equations provide improved peak-flow estimates. Text, figures, and lists are provided summarizing selected peak-flow sites, delineated physiographic regions, peak-flow estimates, basin characteristics, regional regression model equations, error estimates, definitions, data sources, and candidate regression model equations. This study supersedes previous studies of peak flows in Virginia.

  9. Discourse Peak as Zone of Turbulence.

    ERIC Educational Resources Information Center

    Longacre, Robert E.

    Defining peak as the climax of discourse, this paper argues that it is important to identify peak in order to get at the overall grammar of a given discourse. The paper presents case studies in which four instances of peak in narrative discourses occur in languages from four different parts of the world. It also illustrates the occurrence of a…

  10. On the trail of double peak hydrographs

    NASA Astrophysics Data System (ADS)

    Martínez-Carreras, Núria; Hissler, Christophe; Gourdol, Laurent; Klaus, Julian; Juilleret, Jérôme; François Iffly, Jean; McDonnell, Jeffrey J.; Pfister, Laurent

    2016-04-01

    A double peak hydrograph features two peaks as a response to a unique rainfall pulse. The first peak occurs at the same time or shortly after the precipitation has started and it corresponds to a fast catchment response to precipitation. The delayed peak normally starts during the recession of the first peak, when the precipitation has already ceased. Double peak hydrographs may occur for various reasons. They can occur (i) in large catchments when lag times in tributary responses are large, (ii) in urban catchments where the first peak is often caused by direct surface runoff on impervious land cover, and the delayed peak to slower subsurface flow, and (iii) in non-urban catchments, where the first and the delayed discharge peaks are explained by different runoff mechanisms (e.g. overland flow, subsurface flow and/or deep groundwater flow) that have different response times. Here we focus on the third case, as a formal description of the different hydrological mechanisms explaining these complex hydrological dynamics across catchments with diverse physiographic characteristics is still needed. Based on a review of studies documenting double peak events we have established a formal classification of catchments presenting double peak events based on their regolith structure (geological substratum and/or its weathered products). We describe the different hydrological mechanisms that trigger these complex hydrological dynamics across each catchment type. We then use hydrometric time series of precipitation, runoff, soil moisture and groundwater levels collected in the Weierbach (0.46 km2) headwater catchment (Luxembourg) to better understand double peak hydrograph generation. Specifically, we aim to find out (1) if the generation of a double peak hydrograph is a threshold process, (2) if the hysteretic relationships between storage and discharge are consistent during single and double peak hydrographs, and (3) if different functional landscape units (the hillslopes

  11. Passive radio frequency peak power multiplier

    DOEpatents

    Farkas, Zoltan D.; Wilson, Perry B.

    1977-01-01

    Peak power multiplication of a radio frequency source by simultaneous charging of two high-Q resonant microwave cavities by applying the source output through a directional coupler to the cavities and then reversing the phase of the source power to the coupler, thereby permitting the power in the cavities to simultaneously discharge through the coupler to the load in combination with power from the source to apply a peak power to the load that is a multiplication of the source peak power.

  12. Physik gestern und heute Das Eiskalorimeter

    NASA Astrophysics Data System (ADS)

    Heering, P.

    2003-07-01

    Kalorimetrische Messungen gehören heute zum experimentellen Standardrepertoire im Bereich der Thermodynamik und der physikalischen Chemie. Das erste Gerät für derartige Messungen entwickelten Ende des 18. Jahrhunderts die französischen Wissenschaftler Antoine Laurent Lavoisier und Pierre Simon de Laplace.

  13. The Boson peak in supercooled water.

    PubMed

    Kumar, Pradeep; Wikfeldt, K Thor; Schlesinger, Daniel; Pettersson, Lars G M; Stanley, H Eugene

    2013-01-01

    We perform extensive molecular dynamics simulations of the TIP4P/2005 model of water to investigate the origin of the Boson peak reported in experiments on supercooled water in nanoconfined pores, and in hydration water around proteins. We find that the onset of the Boson peak in supercooled bulk water coincides with the crossover to a predominantly low-density-like liquid below the Widom line TW. The frequency and onset temperature of the Boson peak in our simulations of bulk water agree well with the results from experiments on nanoconfined water. Our results suggest that the Boson peak in water is not an exclusive effect of confinement. We further find that, similar to other glass-forming liquids, the vibrational modes corresponding to the Boson peak are spatially extended and are related to transverse phonons found in the parent crystal, here ice Ih. PMID:23771033

  14. Weld peaking on heavy aluminum structures

    NASA Technical Reports Server (NTRS)

    Bayless, E.; Poorman, R.; Sexton, J.

    1978-01-01

    Weld peaking is usually undesirable in any welded structure. In heavy structures, the forces involved in the welding process become very large and difficult to handle. With the shuttle's solid rocket booster, the weld peaking resulted in two major problems: (1) reduced mechanical properties across the weld joint, and (2) fit-up difficulties in subsequent assembly operation. Peaking from the weld shrinkage forces can be fairly well predicted in simple structures; however, in welding complicated assemblies, the amount of peaking is unpredictable because of unknown stresses from machining and forming, stresses induced by the fixturing, and stresses from welds in other parts of the assembly. When excessive peaking is encountered, it can be corrected using the shrinkage forces resulting from the welding process. Application of these forces is discussed in this report.

  15. Multiscale peak alignment for chromatographic datasets.

    PubMed

    Zhang, Zhi-Min; Liang, Yi-Zeng; Lu, Hong-Mei; Tan, Bin-Bin; Xu, Xiao-Na; Ferro, Miguel

    2012-02-01

    Chromatography has been extensively applied in many fields, such as metabolomics and quality control of herbal medicines. Preprocessing, especially peak alignment, is a time-consuming task prior to the extraction of useful information from the datasets by chemometrics and statistics. To accurately and rapidly align shift peaks among one-dimensional chromatograms, multiscale peak alignment (MSPA) is presented in this research. Peaks of each chromatogram were detected based on continuous wavelet transform (CWT) and aligned against a reference chromatogram from large to small scale gradually, and the aligning procedure is accelerated by fast Fourier transform cross correlation. The presented method was compared with two widely used alignment methods on chromatographic dataset, which demonstrates that MSPA can preserve the shapes of peaks and has an excellent speed during alignment. Furthermore, MSPA method is robust and not sensitive to noise and baseline. MSPA was implemented and is available at http://code.google.com/p/mspa. PMID:22222564

  16. Multiscale peak detection in wavelet space.

    PubMed

    Zhang, Zhi-Min; Tong, Xia; Peng, Ying; Ma, Pan; Zhang, Ming-Jin; Lu, Hong-Mei; Chen, Xiao-Qing; Liang, Yi-Zeng

    2015-12-01

    Accurate peak detection is essential for analyzing high-throughput datasets generated by analytical instruments. Derivatives with noise reduction and matched filtration are frequently used, but they are sensitive to baseline variations, random noise and deviations in the peak shape. A continuous wavelet transform (CWT)-based method is more practical and popular in this situation, which can increase the accuracy and reliability by identifying peaks across scales in wavelet space and implicitly removing noise as well as the baseline. However, its computational load is relatively high and the estimated features of peaks may not be accurate in the case of peaks that are overlapping, dense or weak. In this study, we present multi-scale peak detection (MSPD) by taking full advantage of additional information in wavelet space including ridges, valleys, and zero-crossings. It can achieve a high accuracy by thresholding each detected peak with the maximum of its ridge. It has been comprehensively evaluated with MALDI-TOF spectra in proteomics, the CAMDA 2006 SELDI dataset as well as the Romanian database of Raman spectra, which is particularly suitable for detecting peaks in high-throughput analytical signals. Receiver operating characteristic (ROC) curves show that MSPD can detect more true peaks while keeping the false discovery rate lower than MassSpecWavelet and MALDIquant methods. Superior results in Raman spectra suggest that MSPD seems to be a more universal method for peak detection. MSPD has been designed and implemented efficiently in Python and Cython. It is available as an open source package at . PMID:26514234

  17. PeakRanger: A cloud-enabled peak caller for ChIP-seq data

    PubMed Central

    2011-01-01

    Background Chromatin immunoprecipitation (ChIP), coupled with massively parallel short-read sequencing (seq) is used to probe chromatin dynamics. Although there are many algorithms to call peaks from ChIP-seq datasets, most are tuned either to handle punctate sites, such as transcriptional factor binding sites, or broad regions, such as histone modification marks; few can do both. Other algorithms are limited in their configurability, performance on large data sets, and ability to distinguish closely-spaced peaks. Results In this paper, we introduce PeakRanger, a peak caller software package that works equally well on punctate and broad sites, can resolve closely-spaced peaks, has excellent performance, and is easily customized. In addition, PeakRanger can be run in a parallel cloud computing environment to obtain extremely high performance on very large data sets. We present a series of benchmarks to evaluate PeakRanger against 10 other peak callers, and demonstrate the performance of PeakRanger on both real and synthetic data sets. We also present real world usages of PeakRanger, including peak-calling in the modENCODE project. Conclusions Compared to other peak callers tested, PeakRanger offers improved resolution in distinguishing extremely closely-spaced peaks. PeakRanger has above-average spatial accuracy in terms of identifying the precise location of binding events. PeakRanger also has excellent sensitivity and specificity in all benchmarks evaluated. In addition, PeakRanger offers significant improvements in run time when running on a single processor system, and very marked improvements when allowed to take advantage of the MapReduce parallel environment offered by a cloud computing resource. PeakRanger can be downloaded at the official site of modENCODE project: http://www.modencode.org/software/ranger/ PMID:21554709

  18. Peaks theory and the excursion set approach

    NASA Astrophysics Data System (ADS)

    Paranjape, Aseem; Sheth, Ravi K.

    2012-11-01

    We describe a model of dark matter halo abundances and clustering which combines the two most widely used approaches to this problem: that based on peaks and the other based on excursion sets. Our approach can be thought of as addressing the cloud-in-cloud problem for peaks and/or modifying the excursion set approach so that it averages over a special subset, rather than all possible walks. In this respect, it seeks to account for correlations between steps in the walk as well as correlations between walks. We first show how the excursion set and peaks models can be written in the same formalism, and then use this correspondence to write our combined excursion set peaks model. We then give simple expressions for the mass function and bias, showing that even the linear halo bias factor is predicted to be k-dependent as a consequence of the non-locality associated with the peak constraint. At large masses, our model has little or no need to rescale the variable δc from the value associated with spherical collapse, and suggests a simple explanation for why the linear halo bias factor appears to lie above that based on the peak-background split at high masses when such a rescaling is assumed. Although we have concentrated on peaks, our analysis is more generally applicable to other traditionally single-scale analyses of large-scale structure.

  19. Mikro- und Nanokapseln aus Funktionspolymeren, Biopolymeren und Proteinen

    NASA Astrophysics Data System (ADS)

    Schüler, Corinna

    2001-03-01

    In dieser Arbeit wird die Beschichtung von kolloidalen Templaten mit Hilfe der Layer-by-layer Technik beschrieben. Mit ihr ist es möglich, die Oberfläche der Template mit sehr dünnen und gut definierten Filmen zu versehen. Durch Auflösung der Template werden Kapseln hergestellt, die je nach Zusammensetzung der Beschichtung unterschiedliche Eigenschaften aufweisen. In this thesis the coating of colloid templates using the layer-by-layer technique is described. The surface of the templates is modified with thin, well defined films. After dissolving the templates, hollow capsules with different properties are obtained.

  20. In Brief: Timing of peak oil uncertain

    NASA Astrophysics Data System (ADS)

    Zielinski, Sarah

    2007-04-01

    According to the Hubbert peak theory, oil production in any geographic area will follow a bellshaped curve. The timing of the `peak' in global oil production is important because after that point, there will be less and less oil available for consumption. A new report from the U.S. Government Accountability Office found that most studies estimate that peak oil production will occur sometime between now and 2040. The uncertainty in these estimates could be reduced with better information about worldwide supply and demand, and alternative fuels and transportation technologies could mitigate the effects of a global decline in oil production. However, the report found no coordinated U.S. federal strategy to address these issues. The report, ``Uncertainty about Future Oil Supply Makes It Important to Develop a Strategy for Addressing a Peak and Decline in Oil Production,'' is available at http://www.gao.gov/cgi-bin/getrpt?GAO-07-283

  1. Reducing Peak Demand by Time Zone Divisions

    NASA Astrophysics Data System (ADS)

    Chakrabarti, A.

    2014-09-01

    For a large country like India, the electrical power demand is also large and the infrastructure cost for power is the largest among all the core sectors of economy. India has an emerging economy which requires high rate of growth of infrastructure in the power generation, transmission and distribution. The current peak demand in the country is approximately 1,50,000 MW which shall have a planned growth of at least 50 % over the next five years (Seventeenth Electric Power Survey of India, Central Electricity Authority, Government of India, March 2007). By implementing the time zone divisions each comprising of an integral number of contiguous states based on their total peak demand and geographical location, the total peak demand of the nation can be significantly cut down by spreading the peak demand of various states over time. The projected reduction in capital expenditure over a plan period of 5 years is substantial. Also, the estimated reduction in operations expenditure cannot be ignored.

  2. Tectonics, Climate and Earth's highest peaks

    NASA Astrophysics Data System (ADS)

    Robl, Jörg; Prasicek, Günther; Hergarten, Stefan

    2016-04-01

    Prominent peaks characterized by high relief and steep slopes are among the most spectacular morphological features on Earth. In collisional orogens they result from the interplay of tectonically driven crustal thickening and climatically induced destruction of overthickened crust by erosional surface processes. The glacial buzz-saw hypothesis proposes a superior status of climate in limiting mountain relief and peak altitude due to glacial erosion. It implies that peak altitude declines with duration of glacial occupation, i.e., towards high latitudes. This is in strong contrast with high peaks existing in high latitude mountain ranges (e.g. Mt. St. Elias range) and the idea of peak uplift due to isostatic compensation of spatially variable erosional unloading an over-thickened orogenic crust. In this study we investigate landscape dissection, crustal thickness and vertical strain rates in tectonically active mountain ranges to evaluate the influence of erosion on (latitudinal) variations in peak altitude. We analyze the spatial distribution of serval thousand prominent peaks on Earth extracted from the global ETOPO1 digital elevation model with a novel numerical tool. We compare this dataset to crustal thickness, thickening rate (vertical strain rate) and mean elevation. We use the ratios of mean elevation to peak elevation (landscape dissection) and peak elevation to crustal thickness (long-term impact of erosion on crustal thickness) as indicators for the influence of erosional surface processes on peak uplift and the vertical strain rate as a proxy for the mechanical state of the orogen. Our analysis reveals that crustal thickness and peak elevation correlate well in orogens that have reached a mechanically limited state (vertical strain rate near zero) where plate convergence is already balanced by lateral extrusion and gravitational collapse and plateaus are formed. On the Tibetan Plateau crustal thickness serves to predict peak elevation up to an altitude

  3. Flu Season Hasn't Peaked Yet

    MedlinePlus

    ... nlm.nih.gov/medlineplus/news/fullstory_157852.html Flu Season Hasn't Peaked Yet This year's vaccine ... 2016 FRIDAY, March 18, 2016 (HealthDay News) -- This flu season continues to be the mildest in the ...

  4. Observing at Kitt Peak National Observatory.

    ERIC Educational Resources Information Center

    Cohen, Martin

    1981-01-01

    Presents an abridged version of a chapter from the author's book "In Quest of Telescopes." Includes personal experiences at Kitt Peak National Observatory, and comments on telescopes, photographs, and making observations. (SK)

  5. Helping System Engineers Bridge the Peaks

    NASA Technical Reports Server (NTRS)

    Rungta, Neha; Tkachuk, Oksana; Person, Suzette; Biatek, Jason; Whalen, Michael W.; Castle, Joseph; Castle, JosephGundy-Burlet, Karen

    2014-01-01

    In our experience at NASA, system engineers generally follow the Twin Peaks approach when developing safety-critical systems. However, iterations between the peaks require considerable manual, and in some cases duplicate, effort. A significant part of the manual effort stems from the fact that requirements are written in English natural language rather than a formal notation. In this work, we propose an approach that enables system engineers to leverage formal requirements and automated test generation to streamline iterations, effectively "bridging the peaks". The key to the approach is a formal language notation that a) system engineers are comfortable with, b) is supported by a family of automated V&V tools, and c) is semantically rich enough to describe the requirements of interest. We believe the combination of formalizing requirements and providing tool support to automate the iterations will lead to a more efficient Twin Peaks implementation at NASA.

  6. Dentalwerkstoffe und Dentalimplantate - Teil 2

    NASA Astrophysics Data System (ADS)

    Faltermeier, Andreas

    Wie in allen Bereichen der Medizin findet auch in der Zahnmedizin eine kontinuierliche Weiterentwicklung der verwendeten Werkstoffe statt. Gerade für Zahnersatz werden Werkstoffe gesucht, die zum einen ästhetisch, zum anderen haltbar und darüber hinaus auch körperverträglich sind. Auch steigt immer mehr der Wunsch der Patienten nach ästhetischen und zugleich biokompatiblen Materialien. Wurde früher fast ausschließlich als Füllungsmaterial im Seitenzahngebiet quecksilberhaltiges Amalgam verwendet, hat der Zahnarzt heutzutage eine große Auswahl an verschiedenen zahnfarbenen Materialien: zum einen werden sog. Komposite verwendet, das aus einer Polymermatrix mit eingebetteten Füllstoffen besteht, zum anderen können diverse Dentalkeramiken verwendet werden. Besonders die Verwendung von Hochleistungskeramiken, wie beispielsweise Zirkonoxid, das sich bereits als Bremsscheiben für Sportwägen, Hitzeschilde im Space Shuttle und als Kugelköpfe künstlicher Hüftgelenke bewährt hat, spielt heutzutage eine große Rolle bei der Verdrängung des Metalls aus der Mundhöhle. War es früher nur möglich, einen verloren gegangen Zahn mittels einer Brücke, die ein Beschleifen der Nachbarzähne zur Folge hat, oder durch herausnehmbaren Zahnersatz zu ersetzen, ist es heutzutage mit der modernen Implantologie möglich, Zahnersatz zahnschonend einzugliedern. Auch kann mittels Dentalimplantaten dem Wunsch vieler Patienten nach festem Zahnersatz anstelle eines herausnehmbaren Zahnersatzes entsprochen werden. So kann mit Hilfe neuer biokompatiblen Werkstoffe sowohl der ästhetische Anspruch befriedigt als auch das Selbstwertgefühl vieler Patienten angehoben werden.

  7. Forward-peaked scattering of polarized light.

    PubMed

    Clark, Julia P; Kim, Arnold D

    2014-11-15

    Polarized light propagation in a multiple scattering medium is governed by the vector radiative transfer equation. We analyze the vector radiative transfer equation in asymptotic limit of forward-peaked scattering and derive an approximate system of equations for the Stokes parameters, which we call the vector Fokker-Planck approximation. The vector Fokker-Planck approximation provides valuable insight into several outstanding issues regarding the forward-peaked scattering of polarized light such as the polarization memory phenomenon. PMID:25490484

  8. Cosmic microwave background acoustic peak locations

    NASA Astrophysics Data System (ADS)

    Pan, Z.; Knox, L.; Mulroe, B.; Narimani, A.

    2016-07-01

    The Planck collaboration has measured the temperature and polarization of the cosmic microwave background well enough to determine the locations of eight peaks in the temperature (TT) power spectrum, five peaks in the polarization (EE) power spectrum and 12 extrema in the cross (TE) power spectrum. The relative locations of these extrema give a striking, and beautiful, demonstration of what we expect from acoustic oscillations in the plasma; e.g. that EE peaks fall half way between TT peaks. We expect this because the temperature map is predominantly sourced by temperature variations in the last scattering surface, while the polarization map is predominantly sourced by gradients in the velocity field, and the harmonic oscillations have temperature and velocity 90 deg out of phase. However, there are large differences in expectations for extrema locations from simple analytic models versus numerical calculations. Here, we quantitatively explore the origin of these differences in gravitational potential transients, neutrino free-streaming, the breakdown of tight coupling, the shape of the primordial power spectrum, details of the geometric projection from three to two dimensions, and the thickness of the last scattering surface. We also compare the peak locations determined from Planck measurements to expectations under the Λ cold dark matter model. Taking into account how the peak locations were determined, we find them to be in agreement.

  9. Peak Effect in High-Tc Superconductors

    NASA Astrophysics Data System (ADS)

    Ling, Xinsheng

    1996-03-01

    Like many low-Tc superconductors, high-quality YBCO single crystals are found(X.S. Ling and J.I. Budnick, in Magnetic Susceptibility of Superconductors and Other Spin Systems), edited by R.A. Hein, T.L. Francavilla, and D.H. Liebenberg (Plenum Press, New York, 1991), p.377. to exhibit a striking peak effect. In a magnetic field, the temperature dependence of the critical current has a pronounced peak below T_c(H). Pippard(A.B. Pippard, Phil. Mag. 19), 217 (1969)., and subsequently Larkin and Ovchinnikov(A.I. Larkin and Yu.N. Ovchinnikov, J. Low Temp. Phys. 34), 409 (1979)., attributed the onset of the peak effect to a softening of the vortex lattice. In this talk, the experimental discovery^1 of the peak effect in high-Tc superconductors will be described, followed by a brief historical perspective of the understanding of this phenomenon and a discussion of a new model(X.S. Ling, C. Tang, S. Bhattacharya, and P.M. Chaikin, cond-mat/9504109, (NEC Preprint 1995).) for the peak effect. In this model, the peak effect is an interesting manifestation of the vortex-lattice melting in the presence of weak random pinning potentials. The rise of critical current with increasing temperature is a signature of the ``melting'' of the Larkin domains. This work is done in collaboration with Joe Budnick, Chao Tang, Shobo Bhattacharya, Paul Chaikin, and Boyd Veal.

  10. Predicting Peak Flows following Forest Fires

    NASA Astrophysics Data System (ADS)

    Elliot, William J.; Miller, Mary Ellen; Dobre, Mariana

    2016-04-01

    Following forest fires, peak flows in perennial and ephemeral streams often increase by a factor of 10 or more. This increase in peak flow rate may overwhelm existing downstream structures, such as road culverts, causing serious damage to road fills at stream crossings. In order to predict peak flow rates following wildfires, we have applied two different tools. One is based on the U.S.D.A Natural Resource Conservation Service Curve Number Method (CN), and the other is by applying the Water Erosion Prediction Project (WEPP) to the watershed. In our presentation, we will describe the science behind the two methods, and present the main variables for each model. We will then provide an example of a comparison of the two methods to a fire-prone watershed upstream of the City of Flagstaff, Arizona, USA, where a fire spread model was applied for current fuel loads, and for likely fuel loads following a fuel reduction treatment. When applying the curve number method, determining the time to peak flow can be problematic for low severity fires because the runoff flow paths are both surface and through shallow lateral flow. The WEPP watershed version incorporates shallow lateral flow into stream channels. However, the version of the WEPP model that was used for this study did not have channel routing capabilities, but rather relied on regression relationships to estimate peak flows from individual hillslope polygon peak runoff rates. We found that the two methods gave similar results if applied correctly, with the WEPP predictions somewhat greater than the CN predictions. Later releases of the WEPP model have incorporated alternative methods for routing peak flows that need to be evaluated.

  11. Nasal peak inspiratory flow at altitude.

    PubMed

    Barry, P W; Mason, N P; Richalet, J P

    2002-01-01

    The present study investigated whether there are changes in nasal peak inspiratory flow (NPIF) during hypobaric hypoxia under controlled environmental conditions. During operation Everest III (COMEX '97), eight subjects ascended to a simulated altitude of 8,848 m in a hypobaric chamber. NPIF was recorded at simulated altitudes of 0 m, 5,000 m and 8,000 m. Oral peak inspiratory and expiratory flow (OPIF, OPEF) were also measured. Ambient air temperature and humidity were controlled. NPIF increased by a mean +/- SD of 16 +/- 12% from sea level to 8,000 m, whereas OPIF increased by 47 +/- 14%. NPIF rose by 0.085 +/- 0.03 L x s(-1) per kilometre of ascent (p<0.05), significantly less than the rise in OPIF and OPEF of 0.35 +/- 0.10 and 0.33 +/- 0.04 L x s(-1) per kilometre (p<0.0005). Nasal peak inspiratory flow rises with ascent to altitude. The rise in nasal peak inspiratory flow with altitude was far less than oral peak inspiratory flow and less than the predicted rise according to changes in air density. This suggests flow limitation at the nose, and occurs under controlled environmental conditions, refuting the hypothesis that nasal blockage at altitude is due to the inhalation of cold, dry air. Further work is needed to determine if nasal blockage limits activity at altitude. PMID:11843316

  12. Hochschule fur Film und Fernsehen (Babelsberg).

    ERIC Educational Resources Information Center

    Neumann, Roland

    1992-01-01

    Describes the Hochschule fur Film und Fernsehen, an institution of higher education for the study of film and television production in Babelsberg, Germany (formerly the German Democratic Republic). Discusses the major reorientations in the school caused by Germany's reunification. (SR)

  13. Satellitenbewegung, band III: Natiirliche und gesteuerte bewegung.

    NASA Astrophysics Data System (ADS)

    Jochim, E. F.

    2014-12-01

    Im dritten Band der Satellitenbewegung werden in fortlaufender Nummerierung einige für Untersuchungen der Bewegung der künstlichen Satelliten wichtige Grundlagen der Astrodynamik mit ausführlichen mathematischen Formelsystemen behandelt. Dazu zählen die unterschiedlichen Aspekte der Bewegung der natürlichen Himmelskörper, die Steuerung und Kontrolle von künstlichen Objekten, und insbesondere die für eine Satellitenbahnanalyse wichtigen physikalischen Beeinflussungen einer Satellitenbewegung. Mathematisch entscheidend ist die Wahl geeigneter Bahnparameter, die ein bestimmtes Bewegungsproblem widerspruchsfrei und singularitätenfrei zu behandeln gestatten. Für die Behandlung routinemäßiger Aufgabenstellungen der Satellitenbewegung, in erster Linie einer präzisen Bahnbestimmung und Bahnverbesserung, kann auf eine Fülle von lehrbuchartigen Monographien verwiesen werden, so dass diese Problematik in der vorliegenden Arbeit nur angedeutet werden soll.

  14. Simulation und virtuelle Realität

    NASA Astrophysics Data System (ADS)

    von Estorff, Otto; Markiewicz, Marian; Özkan, Ali; Zaleski, Olgierd; Blumrich, Reinhard; Genuit, Klaus; Fiebig, André

    Mit Hilfe akustischer Berechnungen ist es möglich, aufwendige Messungen an Fahrzeugprototypen deutlich zu reduzieren. Dieses Kapitel gibt einen kurzen Überblick über die wichtigsten derzeit verfügbaren Methoden. Dabei wird zunächst auf Elementverfahren, wie die Finite-Elemente-Methode (FEM) und die Boundary-Elemente-Methode (BEM), näher eingegangen. Während diese vor allem im tieffrequenten Bereich eingesetzt werden, kommen bei höheren Frequenzen vermehrt Verfahren zum Einsatz, die auf Energieformulierungen beruhen. Exemplarisch wird hier die Funktionsweise und der Einsatz der Statistischen-Energie-Analyse (SEA) erläutert. Anhand von repräsentativen Beispielen werden die Einsatzmöglichkeiten und Grenzen der verschiedenen Verfahren aufgezeigt, wobei vor allem auch auf Vergleiche zwischen Rechnung und Messung eingegangen wird.

  15. SPANISH PEAKS WILDERNESS STUDY AREA, COLORADO.

    USGS Publications Warehouse

    Budding, Karin E.; Kluender, Steven E.

    1984-01-01

    A geologic and geochemical investigation and a survey of mines and prospects were conducted to evaluate the mineral-resource potential of the Spanish Peaks Wilderness Study Area, Huerfano and Las Animas Counties, in south-central Colorado. Anomalous gold, silver, copper, lead, and zinc concentrations in rocks and in stream sediments from drainage basins in the vicinity of the old mines and prospects on West Spanish Peak indicate a substantiated mineral-resource potential for base and precious metals in the area surrounding this peak; however, the mineralized veins are sparse, small in size, and generally low in grade. There is a possibility that coal may underlie the study area, but it would be at great depth and it is unlikely that it would have survived the intense igneous activity in the area. There is little likelihood for the occurrence of oil and gas because of the lack of structural traps and the igneous activity.

  16. The PEAK experience in South Carolina

    SciTech Connect

    1998-11-01

    The PEAK Institute was developed to provide a linkage for formal (schoolteachers) and nonformal educators (extension agents) with agricultural scientists of Clemson University`s South Carolina Agricultural Experiment Station System. The goal of the Institute was to enable teams of educators and researchers to develop and provide PEAK science and math learning experiences related to relevant agricultural and environmental issues of local communities for both classroom and 4-H Club experiences. The Peak Institute was conducted through a twenty day residential Institute held in June for middle school and high school teachers who were teamed with an Extension agent from their community. These educators participated in hands-on, minds-on sessions conducted by agricultural researchers and Clemson University Cooperative Extension specialists. Participants were given the opportunity to see frontier science being conducted by scientists from a variety of agricultural laboratories.

  17. Paleomagnetism of the Becker Peak stock

    NASA Astrophysics Data System (ADS)

    Miller, B. A.; Housen, B. A.

    2009-12-01

    Paleomagnetic studies of plutonic rocks, although subject to uncertainty due to lack of paleohorizontal control, can provide important constrains of patterns of regional deformation, and can play a role in evaluation of tectonic models and reconstructions. Many plutonic rocks of the Cascades have been well-studied via paleomagnetism, but there are many that lack robust data sets. One such pluton, the Beckler Peak stock, is a late Cretaceous tonalitic stock, with biotite and amphibole K-Ar ages of 93 to 82 Ma (Engels and Crowder, 1971, Yeats and Engels, 1971). The Beckler Peak stock is considered to be a companion body to the larger Mt. Stuart Batholith, but is separated from the Mt. Stuart Batholith by the Evergreen Fault. For this study five paleomagnetic sites were sampled from the Beckler Peak stock near Skykomish, Washington. After low temperature and thermal demagnetization site means were calculated for the four sites where at least two samples survived demagnetization. Unblocking temperatures were indicative of magnetite and hematite as the carriers of remanence. Two of the site means were disregarded due to anomalous directions likely due to sites being from very large slump blocks. The two acceptable site means, along with a Beckler Peak stock site mean from Beck and Noson (1972) and another from Housen et al. (2003) give a stock-wide mean of D = 3.8°, I = 41.9°, k = 32.9, and α95 = 16.2°. This direction is consistent with mean directions for the Mount Stuart batholith determined by Beck and Noson (1972), Beck et al. (1981), and Housen et al. (2003). This directional consistency supports an association between the Beckler Peak stock and the Mt. Stuart Batholith, or at least that these two plutonic bodies were emplaced in the same structural block, and that any post-magnetization deformation (such as rotation and/or tilt associated with the Evergreen Fault) between the Beckler Peak stock and the Mt. Stuart Batholith was minor.

  18. MOSES AND DENNISON PEAK ROADLESS AREAS, CALIFORNIA.

    USGS Publications Warehouse

    Goldfarb, Richard J.; Lipton, David A.

    1984-01-01

    A mineral-resource survey was conducted in the Moses and Dennison Peak Roadless Areas, southeastern Sierra Nevada, California. One area within the Moses Roadless Area is classified as having substantiated mineral-resource potential for small base-metal skarn deposits. Additionally, geochemical data indicate probable potential for small base-metal skarn deposits from one locality within Dennison Peak Roadless Area and for small tungsten skarn deposits from a region within Moses Roadless Area. The geologic setting precludes the presence of energy resources.

  19. Relationships between peak ground acceleration, peak ground velocity, and modified mercalli intensity in California

    USGS Publications Warehouse

    Wald, D.J.; Quitoriano, V.; Heaton, T.H.; Kanamori, H.

    1999-01-01

    We have developed regression relationships between Modified Mercalli Intensity (Imm) and peak ground acceleration (PGA) and velocity (PGV) by comparing horizontal peak ground motions to observed intensities for eight significant California earthquakes. For the limited range of Modified Mercalli intensities (Imm), we find that for peak acceleration with V ??? Imm ??? VIII, Imm = 3.66 log(PGA) - 1.66, and for peak velocity with V ??? Imm ??? IX, Imm = 3.47 log(PGV) + 2.35. From comparison with observed intensity maps, we find that a combined regression based on peak velocity for intensity > VII and on peak acceleration for intensity < VII is most suitable for reproducing observed Imm patterns, consistent with high intensities being related to damage (proportional to ground velocity) and with lower intensities determined by felt accounts (most sensitive to higher-frequency ground acceleration). These new Imm relationships are significantly different from the Trifunac and Brady (1975) correlations, which have been used extensively in loss estimation.

  20. Correlated peak relative light intensity and peak current in triggered lightning subsequent return strokes

    NASA Technical Reports Server (NTRS)

    Idone, V. P.; Orville, R. E.

    1985-01-01

    The correlation between peak relative light intensity L(R) and stroke peak current I(R) is examined for 39 subsequent return strokes in two triggered lightning flashes. One flash contained 19 strokes and the other 20 strokes for which direct measurements were available of the return stroke peak current at ground. Peak currents ranged from 1.6 to 21 kA. The measurements of peak relative light intensity were obtained from photographic streak recordings using calibrated film and microsecond resolution. Correlations, significant at better than the 0.1 percent level, were found for several functional relationships. Although a relation between L(R) and I(R) is evident in these data, none of the analytical relations considered is clearly favored. The correlation between L(R) and the maximum rate of current rise is also examined, but less correlation than between L(R) and I(R) is found. In addition, the peak relative intensity near ground is evaluated for 22 dart leaders, and a mean ratio of peak dart leader to peak return stroke relative light intensity was found to be 0.1 with a range of 0.02-0.23. Using two different methods, the peak current near ground in these dart leaders is estimated to range from 0.1 to 6 kA.

  1. Peak Wind Tool for General Forecasting

    NASA Technical Reports Server (NTRS)

    Barrett, Joe H., III; Short, David

    2008-01-01

    This report describes work done by the Applied Meteorology Unit (AMU) in predicting peak winds at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). The 45th Weather Squadron requested the AMU develop a tool to help them forecast the speed and timing of the daily peak and average wind, from the surface to 300 ft on KSC/CCAFS during the cool season. Based on observations from the KSC/CCAFS wind tower network , Shuttle Landing Facility (SLF) surface observations, and CCAFS sounding s from the cool season months of October 2002 to February 2007, the AMU created mul tiple linear regression equations to predict the timing and speed of the daily peak wind speed, as well as the background average wind speed. Several possible predictors were evaluated, including persistence , the temperature inversion depth and strength, wind speed at the top of the inversion, wind gust factor (ratio of peak wind speed to average wind speed), synoptic weather pattern, occurrence of precipitation at the SLF, and strongest wind in the lowest 3000 ft, 4000 ft, or 5000 ft.

  2. Absorption, Creativity, Peak Experiences, Empathy, and Psychoticism.

    ERIC Educational Resources Information Center

    Mathes, Eugene W.; And Others

    Tellegen and Atkinson suggested that the trait of absorption may play a part in meditative skill, creativity, capacity for peak experiences, and empathy. Although the absorption-meditative skill relationship has been confirmed, other predictions have not been tested. Tellegen and Atkinson's Absorption Scale was completed by undergraduates in four…

  3. Six Ways To Foster Peak Performance.

    ERIC Educational Resources Information Center

    Sevilla, Christine; Wells, Timothy D.

    1999-01-01

    Discusses six initiatives that organizations can support to ensure peak performance: individual knowledge portfolios; mentoring and apprenticeship relationships; electronic conferencing systems; organizational knowledge repository; community of practice; reward and recognition. Defines each initiative and describes how to make each one work in an…

  4. Avoiding the False Peaks in Correlation Discrimination

    SciTech Connect

    Awwal, A S

    2009-07-31

    Fiducials imprinted on laser beams are used to perform video image based alignment of the 192 laser beams in the National Ignition Facility (NIF) of Lawrence Livermore National Laboratory. In many video images, matched filtering is used to detect the location of these fiducials. Generally, the highest correlation peak is used to determine the position of the fiducials. However, when the signal to-be-detected is very weak compared to the noise, this approach totally breaks down. The highest peaks act as traps for false detection. The active target images used for automatic alignment in the National Ignition Facility are examples of such images. In these images, the fiducials of interest exhibit extremely low intensity and contrast, surrounded by high intensity reflection from metallic objects. Consequently, the highest correlation peaks are caused by these bright objects. In this work, we show how the shape of the correlation is exploited to isolate the valid matches from hundreds of invalid correlation peaks, and therefore identify extremely faint fiducials under very challenging imaging conditions.

  5. Hubbert's Peak: the Impending World oil Shortage

    NASA Astrophysics Data System (ADS)

    Deffeyes, K. S.

    2004-12-01

    Global oil production will probably reach a peak sometime during this decade. After the peak, the world's production of crude oil will fall, never to rise again. The world will not run out of energy, but developing alternative energy sources on a large scale will take at least 10 years. The slowdown in oil production may already be beginning; the current price fluctuations for crude oil and natural gas may be the preamble to a major crisis. In 1956, the geologist M. King Hubbert predicted that U.S. oil production would peak in the early 1970s.1 Almost everyone, inside and outside the oil industry, rejected Hubbert's analysis. The controversy raged until 1970, when the U.S. production of crude oil started to fall. Hubbert was right. Around 1995, several analysts began applying Hubbert's method to world oil production, and most of them estimate that the peak year for world oil will be between 2004 and 2008. These analyses were reported in some of the most widely circulated sources: Nature, Science, and Scientific American.2 None of our political leaders seem to be paying attention. If the predictions are correct, there will be enormous effects on the world economy. Even the poorest nations need fuel to run irrigation pumps. The industrialized nations will be bidding against one another for the dwindling oil supply. The good news is that we will put less carbon dioxide into the atmosphere. The bad news is that my pickup truck has a 25-gallon tank.

  6. Peak structural response to nonstationary random excitations

    NASA Technical Reports Server (NTRS)

    Shinozuka, M.; Yang, J.-N.

    1971-01-01

    Study establishes distribution function of peak response values, based on frequency interpretation. Excitations considered include impact loading on landing gears and aircraft gust loading. Because of relative severity of excitations, prediction of fatigue and maximum response characteristics is important part of task of structural analysis and design.

  7. Double-peak subauroral ion drifts (DSAIDs)

    NASA Astrophysics Data System (ADS)

    He, Fei; Zhang, Xiao-Xin; Wang, Wenbin; Chen, Bo

    2016-06-01

    This paper reports double-peak subauroral ion drifts (DSAIDs), which is unique subset of subauroral ion drifts (SAIDs). A statistical analysis has been carried out for the first time with a database of 454 DSAID events identified from Defense Meteorological Satellite Program observations from 1987 to 2012. Both case studies and statistical analyses show that the two velocity peaks of DSAIDs are associated with two ion temperature peaks and two region-2 field-aligned currents (R2-FACs) peaks in the midlatitude ionospheric trough located in the low-conductance subauroral region. DSAIDs are regional and vary significantly with magnetic local time. DSAIDs can evolve from/to SAIDs during their lifetimes, which are from several minutes to tens of minutes. Comparisons between the ionospheric parameters of DSAIDs and SAIDs indicate that double-layer region-2 field-aligned currents (R2-FACs) may be the main driver of DSAIDs. It is also found that DSAIDs happen during more disturbed conditions compared with SAIDs.

  8. Spanish Peaks, Sangre de Cristo Range, Colorado

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The Spanish Peaks, on the eastern flank of the Sangre de Cristo range, abruptly rise 7,000 feet above the western Great Plains. Settlers, treasure hunters, trappers, gold and silver miners have long sighted on these prominent landmarks along the Taos branch of the Santa Fe trail. Well before the westward migration, the mountains figured in the legends and history of the Ute, Apache, Comanche, and earlier tribes. 'Las Cumbres Espanolas' are also mentioned in chronicles of exploration by Spaniards including Ulibarri in 1706 and later by de Anza, who eventually founded San Francisco (California). This exceptional view (STS108-720-32), captured by the crew of Space Shuttle mission STS108, portrays the Spanish Peaks in the context of the southern Rocky Mountains. Uplift of the Sangre de Cristo began about 75 million years ago and produced the long north-trending ridges of faulted and folded rock to the west of the paired peaks. After uplift had ceased (26 to 22 million years ago), the large masses of igneous rock (granite, granodiorite, syenodiorite) that form the Peaks were emplaced (Penn, 1995-2001). East and West Spanish Peaks are 'stocks'-bodies of molten rock that intruded sedimentary layers, cooled and solidified, and were later exposed by erosion. East Peak (E), at 12,708 ft is almost circular and is about 5 1/2 miles long by 3 miles wide, while West Peak (W), at 13,623 ft is roughly 2 3/4 miles long by 1 3/4 miles wide. Great dikes-long stone walls-radiate outward from the mountains like spokes of a wheel, a prominent one forms a broad arc northeast of East Spanish Peak. As the molten rock rose, it forced its way into vertical cracks and joints in the sedimentary strata; the less resistant material was then eroded away, leaving walls of hard rock from 1 foot to 100 feet wide, up to 100 feet high, and as long as 14 miles. Dikes trending almost east-west are also common in the region. For more information visit: Sangres.com: The Spanish Peaks (accessed January 16

  9. Ein mobiler und offener Kernspintomograph: Kernspintomographie für Medizin und Materialforschung

    NASA Astrophysics Data System (ADS)

    Blümich, Bernhard; Kölker, Christian; Casanova, Federico; Perlo, Juan; Felder, Jörg

    2005-09-01

    An der RWTH Aachen wurde der erste offene und mobile Kernspintomograph entwickelt. Anders als die normalerweise riesigen und unbeweglichen Geräte besitzt er keine enge Magnetröhre. So kann er auch in große Untersuchungsobjekte hinein schauen, ohne dass diese zerstört werden müssen. Wie eine Lupe erfasst er dabei ein begrenztes Volumen um den Aufsatzpunkt herum. Neben der Medizin ermöglicht der offene Tomograph viele neue Anwendungsgebiete, vor allem in der Materialprüfung und Qualitätskontrolle. Der Aachener Prototyp kann auch das Fließprofil und die Geschwindigkeitsverteilung strömender Flüssigkeiten sichtbar machen. Sein offenes Prinzip erforderte neue technische Komponenten und modifizierte bildgebende Verfahren. Die Messzeit pro Bild kann heute schon unter einer Viertelstunde liegen.

  10. The spatial resolution of epidemic peaks.

    PubMed

    Mills, Harriet L; Riley, Steven

    2014-04-01

    The emergence of novel respiratory pathogens can challenge the capacity of key health care resources, such as intensive care units, that are constrained to serve only specific geographical populations. An ability to predict the magnitude and timing of peak incidence at the scale of a single large population would help to accurately assess the value of interventions designed to reduce that peak. However, current disease-dynamic theory does not provide a clear understanding of the relationship between: epidemic trajectories at the scale of interest (e.g. city); population mobility; and higher resolution spatial effects (e.g. transmission within small neighbourhoods). Here, we used a spatially-explicit stochastic meta-population model of arbitrary spatial resolution to determine the effect of resolution on model-derived epidemic trajectories. We simulated an influenza-like pathogen spreading across theoretical and actual population densities and varied our assumptions about mobility using Latin-Hypercube sampling. Even though, by design, cumulative attack rates were the same for all resolutions and mobilities, peak incidences were different. Clear thresholds existed for all tested populations, such that models with resolutions lower than the threshold substantially overestimated population-wide peak incidence. The effect of resolution was most important in populations which were of lower density and lower mobility. With the expectation of accurate spatial incidence datasets in the near future, our objective was to provide a framework for how to use these data correctly in a spatial meta-population model. Our results suggest that there is a fundamental spatial resolution for any pathogen-population pair. If underlying interactions between pathogens and spatially heterogeneous populations are represented at this resolution or higher, accurate predictions of peak incidence for city-scale epidemics are feasible. PMID:24722420

  11. Anreicherung von Webinhalten mit Semantik - Microformats und RDFa

    NASA Astrophysics Data System (ADS)

    Hausenblas, Michael

    Semantik in Webinhalten wird heftig diskutiert. Teilweise wird es auch schon praktiziert. Dieser Beitrag geht auf semantisches HTML, Microformats und RDFa näher ein und zeigt anhand von praktischen Beispielen, wie und wo diese verwendet werden können.

  12. Predicting VO2peak from Submaximal- and Peak Exercise Models: The HUNT 3 Fitness Study, Norway

    PubMed Central

    Loe, Henrik; Nes, Bjarne M.; Wisløff, Ulrik

    2016-01-01

    Purpose Peak oxygen uptake (VO2peak) is seldom assessed in health care settings although being inversely linked to cardiovascular risk and all-cause mortality. The aim of this study was to develop VO2peak prediction models for men and women based on directly measured VO2peak from a large healthy population Methods VO2peak prediction models based on submaximal- and peak performance treadmill work were derived from multiple regression analysis. 4637 healthy men and women aged 20–90 years were included. Data splitting was used to generate validation and cross-validation samples. Results The accuracy for the peak performance models were 10.5% (SEE = 4.63 mL⋅kg-1⋅min-1) and 11.5% (SEE = 4.11 mL⋅kg-1⋅min-1) for men and women, respectively, with 75% and 72% of the variance explained. For the submaximal performance models accuracy were 14.1% (SEE = 6.24 mL⋅kg-1⋅min-1) and 14.4% (SEE = 5.17 mL⋅kg-1⋅min-1) for men and women, respectively, with 55% and 56% of the variance explained. The validation and cross-validation samples displayed SEE and variance explained in agreement with the total sample. Cross-classification between measured and predicted VO2peak accurately classified 91% of the participants within the correct or nearest quintile of measured VO2peak. Conclusion Judicious use of the exercise prediction models presented in this study offers valuable information in providing a fairly accurate assessment of VO2peak, which may be beneficial for risk stratification in health care settings. PMID:26794677

  13. Tycho Brahe - Instrumentenbauer und Meister der Beobachtungstechnik

    NASA Astrophysics Data System (ADS)

    Wolfschmidt, Gudrun

    Vor der Erfindung des Fernrohrs war der dänische Astronom Tycho Brahe (1546 - 1601) der bedeutendste beobachtende Astronom. Von seinem Observatorium Uraniborg auf der - damals dänischen - Insel Hven ist heute noch der Grundriß erkennbar, von Stjerneborg sind die Fundamente erhalten, die Kuppeln in den 1950er Jahren ergänzt. In der Astronomie-Ausstellung im Deutschen Museum gibt es ein Modell der Sternwarte Uraniborg und der zugehörigen Instrumente (Maßstab 1:10); das größere Modell wurde dem Technischen Museum in Malmö geschenkt. Die Instrumente, die er in den Observatorien Uraniborg und Stjerneborg benutzte, sind nicht erhalten. Aber es gibt gute Beschreibungen der Instrumente (Halbkreis, Quadranten, Sextanten, Armillarsphären, Triquetrum, Himmelsglobus) in seinem Buch Astronomiae instauratae mechanica (Wandsbek 1598). Eine Nachbildung des großen hölzernen Quadranten kann man im Runden Turm in Kopenhagen sehen. Zwei Sextanten, hergestellt für Tycho um 1600 von Jost Bürgi und Erasmus Habermel, gibt es noch im Nationalmuseum für Technik in Prag. Ähnlichkeiten von Tychos Instrumenten mit Groß-Instrumenten aus dem islamischen Kulturkreis sind auffällig. Tycho Brahes Meßgeräte markieren einen großen Fortschritt in der Entwicklung astronomischer Instrumente und Meßtechniken und bilden die Grundlage für den weiteren Fortschritt der Positionsastronomie und der damit verbundenen Tabellenwerke. Die Nachwirkungen sind bis ins 17. und 18. Jahrhundert nachweisbar.

  14. Peak Oil, Food Systems, and Public Health

    PubMed Central

    Parker, Cindy L.; Kirschenmann, Frederick L.; Tinch, Jennifer; Lawrence, Robert S.

    2011-01-01

    Peak oil is the phenomenon whereby global oil supplies will peak, then decline, with extraction growing increasingly costly. Today's globalized industrial food system depends on oil for fueling farm machinery, producing pesticides, and transporting goods. Biofuels production links oil prices to food prices. We examined food system vulnerability to rising oil prices and the public health consequences. In the short term, high food prices harm food security and equity. Over time, high prices will force the entire food system to adapt. Strong preparation and advance investment may mitigate the extent of dislocation and hunger. Certain social and policy changes could smooth adaptation; public health has an essential role in promoting a proactive, smart, and equitable transition that increases resilience and enables adequate food for all. PMID:21778492

  15. 27 CFR 9.140 - Atlas Peak.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... miles to the highest point of an unnamed peak of 1268 feet elevation in section 12, T. 6 N., R. 4 W. on... 12 and 13, T. 7 N., R. 4 W. on the Yountville U.S.G.S. map; (10) Then following the section boundary... elevation, located in section 10, T. N., R. 4 W.; (12) Then northwest in a straight line approximately...

  16. 27 CFR 9.140 - Atlas Peak.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... miles to the highest point of an unnamed peak of 1268 feet elevation in section 12, T. 6 N., R. 4 W. on... 12 and 13, T. 7 N., R. 4 W. on the Yountville U.S.G.S. map; (10) Then following the section boundary... elevation, located in section 10, T. N., R. 4 W.; (12) Then northwest in a straight line approximately...

  17. Revisiting Twomey's approximation for peak supersaturation

    NASA Astrophysics Data System (ADS)

    Shipway, B. J.

    2015-04-01

    Twomey's seminal 1959 paper provided lower and upper bound approximations to the estimation of peak supersaturation within an updraft and thus provides the first closed expression for the number of nucleated cloud droplets. The form of this approximation is simple, but provides a surprisingly good estimate and has subsequently been employed in more sophisticated treatments of nucleation parametrization. In the current paper, we revisit the lower bound approximation of Twomey and make a small adjustment that can be used to obtain a more accurate calculation of peak supersaturation under all potential aerosol loadings and thermodynamic conditions. In order to make full use of this improved approximation, the underlying integro-differential equation for supersaturation evolution and the condition for calculating peak supersaturation are examined. A simple rearrangement of the algebra allows for an expression to be written down that can then be solved with a single lookup table with only one independent variable for an underlying lognormal aerosol population. While multimodal aerosol with N different dispersion characteristics requires 2N+1 inputs to calculate the activation fraction, only N of these one-dimensional lookup tables are needed. No additional information is required in the lookup table to deal with additional chemical, physical or thermodynamic properties. The resulting implementation provides a relatively simple, yet computationally cheap, physically based parametrization of droplet nucleation for use in climate and Numerical Weather Prediction models.

  18. [Fast spectral modeling based on Voigt peaks].

    PubMed

    Li, Jin-rong; Dai, Lian-kui

    2012-03-01

    Indirect hard modeling (IHM) is a recently introduced method for quantitative spectral analysis, which was applied to the analysis of nonlinear relation between mixture spectrum and component concentration. In addition, IHM is an effectual technology for the analysis of components of mixture with molecular interactions and strongly overlapping bands. Before the establishment of regression model, IHM needs to model the measured spectrum as a sum of Voigt peaks. The precision of the spectral model has immediate impact on the accuracy of the regression model. A spectrum often includes dozens or even hundreds of Voigt peaks, which mean that spectral modeling is a optimization problem with high dimensionality in fact. So, large operation overhead is needed and the solution would not be numerically unique due to the ill-condition of the optimization problem. An improved spectral modeling method is presented in the present paper, which reduces the dimensionality of optimization problem by determining the overlapped peaks in spectrum. Experimental results show that the spectral modeling based on the new method is more accurate and needs much shorter running time than conventional method. PMID:22582612

  19. METing SUSY on the Z peak

    NASA Astrophysics Data System (ADS)

    Barenboim, G.; Bernabeu, J.; Mitsou, V. A.; Romero, E.; Vives, O.

    2016-02-01

    Recently the ATLAS experiment announced a 3 σ excess at the Z-peak consisting of 29 pairs of leptons together with two or more jets, ET^{miss} > 225 GeV and HT > 600 GeV, to be compared with 10.6 ± 3.2 expected lepton pairs in the Standard Model. No excess outside the Z-peak was observed. By trying to explain this signal with SUSY we find that only relatively light gluinos, m_{tilde{g}} ≲ 1.2 TeV, together with a heavy neutralino NLSP of m_{tilde{χ }} ≳ 400 GeV decaying predominantly to Z-boson plus a light gravitino, such that nearly every gluino produces at least one Z-boson in its decay chain, could reproduce the excess. We construct an explicit general gauge mediation model able to reproduce the observed signal overcoming all the experimental limits. Needless to say, more sophisticated models could also reproduce the signal, however, any model would have to exhibit the following features: light gluinos, or heavy particles with a strong production cross section, producing at least one Z-boson in its decay chain. The implications of our findings for the Run II at LHC with the scaling on the Z peak, as well as for the direct search of gluinos and other SUSY particles, are pointed out.

  20. Eyesight and the solar Wien peak

    NASA Astrophysics Data System (ADS)

    Overduin, James M.

    2003-03-01

    It is sometimes said that humans see best at yellow-green wavelengths because they have evolved under a Sun whose blackbody spectrum has a Wien peak in the green part of the spectrum. However, as a function of frequency, the solar blackbody spectrum peaks in the infrared. Why did human vision not evolve toward a peak sensitivity in this range, if the eye is an efficient quantum detector of photons? The puzzle is resolved if we assume that natural selection acted in such a way as to maximize the amount of energy that can be detected by the retina across a range of wavelengths (whose upper and lower limits are fixed by biological constraints). It is then found that our eyes are indeed perfectly adapted to life under a class G2 star. Extending this reasoning allows educated guesses to be made about the kind of eyesight that might have evolved in extrasolar planetary systems such as that of the red dwarf Gliese 876.

  1. Quantifying peak discharges for historical floods

    USGS Publications Warehouse

    Cook, J.L.

    1987-01-01

    It is usually advantageous to use information regarding historical floods, if available, to define the flood-frequency relation for a stream. Peak stages can sometimes be determined for outstanding floods that occurred many years ago before systematic gaging of streams began. In the United States, this information is usually not available for more than 100-200 years, but in countries with long cultural histories, such as China, historical flood data are available at some sites as far back as 2,000 years or more. It is important in flood studies to be able to assign a maximum discharge rate and an associated error range to the historical flood. This paper describes the significant characteristics and uncertainties of four commonly used methods for estimating the peak discharge of a flood. These methods are: (1) rating curve (stage-discharge relation) extension; (2) slope conveyance; (3) slope area; and (4) step backwater. Logarithmic extensions of rating curves are based on theoretical plotting techniques that results in straight line extensions provided that channel shape and roughness do not change significantly. The slope-conveyance and slope-area methods are based on the Manning equation, which requires specific data on channel size, shape and roughness, as well as the water-surface slope for one or more cross-sections in a relatively straight reach of channel. The slope-conveyance method is used primarily for shaping and extending rating curves, whereas the slope-area method is used for specific floods. The step-backwater method, also based on the Manning equation, requires more cross-section data than the slope-area ethod, but has a water-surface profile convergence characteristic that negates the need for known or estimated water-surface slope. Uncertainties in calculating peak discharge for historical floods may be quite large. Various investigations have shown that errors in calculating peak discharges by the slope-area method under ideal conditions for

  2. Will peak oil accelerate carbon dioxide emissions?

    NASA Astrophysics Data System (ADS)

    Caldeira, K.; Davis, S. J.; Cao, L.

    2008-12-01

    The relative scarcity of oil suggests that oil production is peaking and will decline thereafter. Some have suggested that this represents an opportunity to reduce carbon dioxide emissions. However, in the absence of constraints on carbon dioxide emission, "peak oil" may drive a shift towards increased reliance on coal as a primary energy source. Because coal per unit energy, in the absence of carbon capture and disposal, releases more carbon dioxide to the atmosphere than oil, "peak oil" may lead to an acceleration of carbon dioxide emissions. We will never run out of oil. As oil becomes increasingly scarce, prices will rise and therefore consumption will diminish. As prices rise, other primary energy sources will become increasingly competitive with oil. The developed world uses oil primarily as a source of transportation fuels. The developing world uses oil primarily for heat and power, but the trend is towards increasing reliance on oil for transportation. Liquid fuels, including petroleum derivatives such as gasoline and diesel fuel, are attractive as transportation fuels because of their relative abundance of energy per unit mass and volume. Such considerations are especially important for the air transport industry. Today, there is little that can compete with petroleum-derived transportation fuels. Future CO2 emissions from the transportation sector largely depend on what replaces oil as a source of fuel. Some have suggested that biomass-derived ethanol, hydrogen, or electricity could play this role. Each of these potential substitutes has its own drawbacks (e.g., low power density per unit area in the case of biomass, low power density per unit volume in the case of hydrogen, and low power density per unit mass in the case of battery storage). Thus, it is entirely likely that liquefaction of coal could become the primary means by which transportation fuels are produced. Since the burning of coal produces more CO2 per unit energy than does the burning of

  3. Leitbilder und Handlungsstrategien für die Raumentwicklung in Deutschland. Entwicklungs-, Umsetzungs- und Fortschreibungsprozess der Bund-Länder-Strategie für Städte und Regionen

    NASA Astrophysics Data System (ADS)

    Issaoui, Mariam; Sinz, Manfred

    2010-09-01

    Die Ministerkonferenz für Raumordnung stellte im Mai 2010 fest, dass sich die „Leitbilder und Handlungsstrategien für die Raumentwicklung in Deutschland“ (2006) bewährt haben und bei der Gestaltung der räumlichen Entwicklung umgesetzt werden. Um die Leitbilder den sich verändernden wirtschaftlichen, sozialen und naturräumlichen Rahmenbedingungen anzupassen und die Erkenntnisse aus dem bisherigen Diskussions- und Umsetzungsprozess in Politik und Praxis einzubeziehen, sind sie zu ergänzen und weiterzuentwickeln. Im Mittelpunkt der Fortschreibung werden die Themen „Partnerschaften und Strategien für Stadtregionen und ländliche Räume“, „Mobilität und Logistik“ sowie „Klimaschutz und Energieversorgung“ stehen.

  4. Measuring non-local Lagrangian peak bias

    NASA Astrophysics Data System (ADS)

    Biagetti, Matteo; Chan, Kwan Chuen; Desjacques, Vincent; Paranjape, Aseem

    2014-06-01

    We investigate non-local Lagrangian bias contributions involving gradients of the linear density field, for which we have predictions from the excursion set peak formalism. We begin by writing down a bias expansion which includes all the bias terms, including the non-local ones. Having checked that the model furnishes a reasonable fit to the halo mass function, we develop a one-point cross-correlation technique to measure bias factors associated with χ2-distributed quantities. We validate the method with numerical realizations of peaks of Gaussian random fields before we apply it to N-body simulations. We focus on the lowest (quadratic) order non-local contributions -2χ _{10}(k_1\\cdot k_2) and χ _{01}[3(k_1\\cdot k_2)^2-k_1^2 k_2^2], where k_1, k_2 are wave modes. We can reproduce our measurement of χ10 if we allow for an offset between the Lagrangian halo centre-of-mass and the peak position. The sign and magnitude of χ10 is consistent with Lagrangian haloes sitting near linear density maxima. The resulting contribution to the halo bias can safely be ignored for M = 1013 M⊙ h-1, but could become relevant at larger halo masses. For the second non-local bias χ01 however, we measure a much larger magnitude than predicted by our model. We speculate that some of this discrepancy might originate from non-local Lagrangian contributions induced by non-spherical collapse.

  5. Calculating weighted estimates of peak streamflow statistics

    USGS Publications Warehouse

    Cohn, Timothy A.; Berenbrock, Charles; Kiang, Julie E.; Mason, Jr., Robert R.

    2012-01-01

    According to the Federal guidelines for flood-frequency estimation, the uncertainty of peak streamflow statistics, such as the 1-percent annual exceedance probability (AEP) flow at a streamgage, can be reduced by combining the at-site estimate with the regional regression estimate to obtain a weighted estimate of the flow statistic. The procedure assumes the estimates are independent, which is reasonable in most practical situations. The purpose of this publication is to describe and make available a method for calculating a weighted estimate from the uncertainty or variance of the two independent estimates.

  6. PeakVizor: Visual Analytics of Peaks in Video Clickstreams from Massive Open Online Courses.

    PubMed

    Chen, Qing; Chen, Yuanzhe; Liu, Dongyu; Shi, Conglei; Wu, Yingcai; Qu, Huamin

    2016-10-01

    Massive open online courses (MOOCs) aim to facilitate open-access and massive-participation education. These courses have attracted millions of learners recently. At present, most MOOC platforms record the web log data of learner interactions with course videos. Such large amounts of multivariate data pose a new challenge in terms of analyzing online learning behaviors. Previous studies have mainly focused on the aggregate behaviors of learners from a summative view; however, few attempts have been made to conduct a detailed analysis of such behaviors. To determine complex learning patterns in MOOC video interactions, this paper introduces a comprehensive visualization system called PeakVizor. This system enables course instructors and education experts to analyze the "peaks" or the video segments that generate numerous clickstreams. The system features three views at different levels: the overview with glyphs to display valuable statistics regarding the peaks detected; the flow view to present spatio-temporal information regarding the peaks; and the correlation view to show the correlation between different learner groups and the peaks. Case studies and interviews conducted with domain experts have demonstrated the usefulness and effectiveness of PeakVizor, and new findings about learning behaviors in MOOC platforms have been reported. PMID:26661473

  7. Documented and potential extreme peak discharges and relation between potential extreme peak discharges and probable maximum flood peak discharges in Texas

    USGS Publications Warehouse

    Asquith, W.H.; Slade, R.M., Jr.

    1995-01-01

    The U.S. Geological Survey, in cooperation with the Texas Department of Transportation, conducted a study of extreme flood potential for Texas. Potential extreme peak discharges, derived from the relation between documented extreme peak discharges and their contributing drainage areas, can provide valuable information concerning the maximum expected peak discharge that could occur at a stream site. Documented extreme peak discharges and associated data were aggregated for 832 sites with and without streamflow-gaging stations in natural basins in Texas. A potential extreme peak discharge curve was developed for each of 11 hydrologic regions in Texas and for the State as a whole, based on documented extreme peak discharges and associated contributing drainage areas. The curve envelops, for a large range of drainage areas, the largest documented extreme peak discharges. Potential extreme peak discharges estimated from the curves were compared to probable maximum flood peak discharges estimated from various simulation models.

  8. Outreach Plans for Storm Peak Laboratory

    NASA Astrophysics Data System (ADS)

    Hallar, A. G.; McCubbin, I. B.

    2006-12-01

    The Desert Research Institute (DRI) operates a high elevation facility, Storm Peak Laboratory (SPL), located on the west summit of Mt. Werner in the Park Range near Steamboat Springs, Colorado at an elevation 10,500 ft. SPL provides an ideal location for long-term research on the interactions of atmospheric aerosol and gas- phase chemistry with cloud and natural radiation environments. SPL includes an office-type laboratory room for computer and instrumentation setup with outside air ports and cable access to the roof deck, a full kitchen and two bunk rooms with sleeping space for nine persons. We plan to create a unique summer undergraduate education experiences for students of diversity at Storm Peak Laboratory. As stressed by the College Pathways to Science Education Standards [Siebert and McIntosh, 2001], to support changes in K-12 science education transformations must first be made at the college level, including inquiry-oriented opportunities to engage in meaningful research. These workshops will be designed to allow students to experience the excitement of science, increasing their likelihood of pursing careers within the fields of scientific education or research.

  9. Low peak-power laser ultrasonics

    NASA Astrophysics Data System (ADS)

    Pierce, S. G.; Cleary, A.; Veres, I. A.; Culshaw, B.; Thursby, G.; McKee, C.; Swift, C.; Armstrong, I.

    2011-09-01

    Techniques for the successful excitation of guided ultrasonic waves using a low peak-power laser ultrasonic source are discussed and compared with more conventional Q-switched laser sources. The paper considers acoustic propagation in thin plates, in which the frequencies used, typically only the fundamental guided wave modes, are considered. Aspects of excitation and detection geometry are considered along with the physical mechanisms of photo-acoustic generation and the practical issues surrounding available source wavelengths and power outputs. Understanding of the effects of these constraints is critical for the successful application of the technique. Continuous wave excitation and fully arbitrary modulation schemes are compared, and a technique to control the bandwidth of Golay code modulation is introduced. It is shown that earlier work by the authors was capable of guided wave detection at peak-power densities of 104 W cm- 2. Later work has focussed on the use of erbium-doped fibre amplifiers combined with Golay code modulation to improve the recovered signal-to-noise ratio. Two key applications of the techniques are considered: material properties measurements (using inversion of dispersion curve data) and acoustic emission system calibration.

  10. Microwave peak absorption frequency of liquid

    NASA Astrophysics Data System (ADS)

    Han, Guangze; Chen, Mingdong

    2008-09-01

    Microwave-assisted extraction is a new effective method which has practical applications in many fields. Microwave heating is one of its physical mechanisms, and it also has the characteristic of selectivity. When the applied microwave frequency equals a certain absorption frequency of the material (or specific component), the material will intensively absorb microwave energy. This is also known as resonant absorption, and the frequency is called the peak absorption frequency which depends on the physical structure of the material. In this work, dynamic hydrogen bond energy was included in molecular activation energy; with the liquid cell model, the expression of interaction energy between dipolar molecules was derived. The rotational relaxation time was gotten from the Eyring viscosity formula. Then based on the relationship between dielectric dissipation coefficient and relaxation time, the expression of microwave peak absorption frequency as a function of the material physical structure, rotational inertia and electrical dipole moment of molecules was established. These theoretical formulas were applied to water and benzene, and the calculated results agree fairly well with the experimental data. This work can not only deepen the study of the interaction between microwave and material, but also provide a possible guide for the experiment of microwave-assisted extraction.

  11. Peak Wind Tool for General Forecasting

    NASA Technical Reports Server (NTRS)

    Barrett, Joe H., III

    2010-01-01

    The expected peak wind speed of the day is an important forecast element in the 45th Weather Squadron's (45 WS) daily 24-Hour and Weekly Planning Forecasts. The forecasts are used for ground and space launch operations at the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). The 45 WS also issues wind advisories for KSC/CCAFS when they expect wind gusts to meet or exceed 25 kt, 35 kt and 50 kt thresholds at any level from the surface to 300 ft. The 45 WS forecasters have indicated peak wind speeds are challenging to forecast, particularly in the cool season months of October - April. In Phase I of this task, the Applied Meteorology Unit (AMU) developed a tool to help the 45 WS forecast non-convective winds at KSC/CCAFS for the 24-hour period of 0800 to 0800 local time. The tool was delivered as a Microsoft Excel graphical user interface (GUI). The GUI displayed the forecast of peak wind speed, 5-minute average wind speed at the time of the peak wind, timing of the peak wind and probability the peak speed would meet or exceed 25 kt, 35 kt and 50 kt. For the current task (Phase II ), the 45 WS requested additional observations be used for the creation of the forecast equations by expanding the period of record (POR). Additional parameters were evaluated as predictors, including wind speeds between 500 ft and 3000 ft, static stability classification, Bulk Richardson Number, mixing depth, vertical wind shear, temperature inversion strength and depth and wind direction. Using a verification data set, the AMU compared the performance of the Phase I and II prediction methods. Just as in Phase I, the tool was delivered as a Microsoft Excel GUI. The 45 WS requested the tool also be available in the Meteorological Interactive Data Display System (MIDDS). The AMU first expanded the POR by two years by adding tower observations, surface observations and CCAFS (XMR) soundings for the cool season months of March 2007 to April 2009. The POR was expanded

  12. Mineral resources of the Redcloud Peak and Handies Peak Wilderness Study Areas, Hinsdale County, Colorado

    SciTech Connect

    Sanford, R.F.; Grauch, R.I.; Hon, K.; Bove, D.J.; Grauch, V.J.S.; Korzeb, S.L.

    1987-01-01

    The Redcloud Peak and Handies Peak Wilderness Study Areas are located 2-12 mi southwest of Lake City, CO. Much of the study areas has high mineral resource potential for precious and base metals in various ore deposit types. The rest of the study areas has moderate potential for these commodities. Two areas in the Redcloud Peak study area have moderate potential for molybdenum and copper in quartz monzonite-associated porphyry deposits. Part of the Handies Peak study area has moderate potential for molybdenum in granite-related porphyry deposits. The southwestern part of the Redcloud Peak study area has high potential for uranium in vein-type deposits. Moderate potential for this commodity extends over other parts of both study areas. The mineral resource potential for gold and silver (in clastic-sediment-hosted disseminated-type epithermal deposits) is low in those parts of both study areas underlain by the Henson Member of the Silverton Volcanics. The mineral and energy resource potential for aluminum (in alunite deposits), uranium (in disseminated deposits), and geothermal sources is low throughout both study areas. Based on currently available data, there is no energy resource potential for coal, oil, and natural gas. The study areas have no identified resources.

  13. Twin Peaks in 360-degree panorama

    NASA Technical Reports Server (NTRS)

    1997-01-01

    The prominent hills dubbed 'Twin Peaks' approximately 1-2 kilometers away were imaged by the Imager for Mars Pathfinder (IMP) as part of a 360-degree color panorama, taken over sols 8, 9 and 10. A lander petal and deflated airbag are at the bottom of the image.

    Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is an operating division of the California Institute of Technology (Caltech). The Imager for Mars Pathfinder (IMP) was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

  14. NMR solvent peak suppression by nonlinear excitation

    NASA Astrophysics Data System (ADS)

    Levitt, Malcolm H.

    1988-03-01

    Most existing NMR solvent peak suppression sequences provide a satisfactory dependence of the intensity of excited signals on frequency but poor phase characteristics. In practice this leads to spectral distortions which generally become more severe as the frequency selectivity of the sequence is increased. However, it is shown that by working well outside the linear response regime, excitation schemes which combine high frequency selectivity with good phase properties may be devised. Sequences of six rectangular radio-frequency pulses were discovered using a combination of coherent averaging theory to treat the near-resonant behavior and numerical simulation further from resonance. Extensive use of symmetry greatly simplifies both the coherent averaging calculations and the numerical simulations. The new pulse sequences have been given the acronym NERO (nonlinear excitation rejecting on-resonance). Experimental spectra of an enzyme in dilute aqueous solution are shown.

  15. BUFFALO PEAKS WILDERNESS STUDY AREA, COLORADO.

    USGS Publications Warehouse

    Hedlund, D.C.; Wood, R.H.

    1984-01-01

    Field investigations were conducted to evaluate the mineral-resource potential of the Buffalo Peaks Wilderness Study Area, Colorado. On the basis of this study there is a probable mineral-resource potential for silver vein and bedding replacement deposits along the Weston Pass fault zone, for hydrothermal vein-type uranium deposits in the vicinity of the Parkdale iron pit, and for gold vein deposits in the parts of the Granite and Four Mile districts that are within the wilderness study area. A probable barite resource potential occurs at Rough and Tumbling Creek and near Spring Creek on the east side of the study area. There is little promise for the occurrence of energy resources.

  16. Sample distribution in peak mode isotachophoresis

    SciTech Connect

    Rubin, Shimon; Schwartz, Ortal; Bercovici, Moran

    2014-01-15

    We present an analytical study of peak mode isotachophoresis (ITP), and provide closed form solutions for sample distribution and electric field, as well as for leading-, trailing-, and counter-ion concentration profiles. Importantly, the solution we present is valid not only for the case of fully ionized species, but also for systems of weak electrolytes which better represent real buffer systems and for multivalent analytes such as proteins and DNA. The model reveals two major scales which govern the electric field and buffer distributions, and an additional length scale governing analyte distribution. Using well-controlled experiments, and numerical simulations, we verify and validate the model and highlight its key merits as well as its limitations. We demonstrate the use of the model for determining the peak concentration of focused sample based on known buffer and analyte properties, and show it differs significantly from commonly used approximations based on the interface width alone. We further apply our model for studying reactions between multiple species having different effective mobilities yet co-focused at a single ITP interface. We find a closed form expression for an effective-on rate which depends on reactants distributions, and derive the conditions for optimizing such reactions. Interestingly, the model reveals that maximum reaction rate is not necessarily obtained when the concentration profiles of the reacting species perfectly overlap. In addition to the exact solutions, we derive throughout several closed form engineering approximations which are based on elementary functions and are simple to implement, yet maintain the interplay between the important scales. Both the exact and approximate solutions provide insight into sample focusing and can be used to design and optimize ITP-based assays.

  17. DOUBLE-PEAKED NARROW-LINE ACTIVE GALACTIC NUCLEI. II. THE CASE OF EQUAL PEAKS

    SciTech Connect

    Smith, K. L.; Shields, G. A.; Salviander, S.; Stevens, A. C.; Rosario, D. J. E-mail: shields@astro.as.utexas.edu E-mail: acs0196@mail.utexas.edu

    2012-06-10

    Active galactic nuclei (AGNs) with double-peaked narrow lines (DPAGNs) may be caused by kiloparsec-scale binary AGNs, bipolar outflows, or rotating gaseous disks. We examine the class of DPAGNs in which the two narrow-line components have closely similar intensity as being especially likely to involve disks or jets. Two spectroscopic indicators support this likelihood. For DPAGNs from Smith et al., the 'equal-peaked' objects (EPAGNs) have [Ne V]/[O III]ratios lower than for a control sample of non-double-peaked AGNs. This is unexpected for a pair of normal AGNs in a galactic merger, but may be consistent with [O III] emission from a rotating ring with relatively little gas at small radii. Also, [O III]/H{beta} ratios of the redshifted and blueshifted systems in the EPAGN are more similar to each other than in a control sample, suggestive of a single ionizing source and inconsistent with the binary interpretation.

  18. Peak, multi-peak and broadband absorption in graphene-based one-dimensional photonic crystal

    NASA Astrophysics Data System (ADS)

    Miloua, R.; Kebbab, Z.; Chiker, F.; Khadraoui, M.; Sahraoui, K.; Bouzidi, A.; Medles, M.; Mathieu, C.; Benramdane, N.

    2014-11-01

    We theoretically investigate the possibility of enhancing light absorption in graphene-based one dimensional photonic crystal. We demonstrate that it is possible to achieve total light absorption at technologically important wavelengths using one-dimensional graphene-based photonic crystals. By means of the transfer matrix method, we investigate the effect of refractive indices and layer numbers on the optical response of the structure. We found that it is possible to achieve one peak, multi-peak or broadband, and complete optical absorption. As a result, the proposed photonic structures enable myriad potential applications such as photodetection, shielding and optical sensing.

  19. Volkszählung und Mikrozensus1

    NASA Astrophysics Data System (ADS)

    Grohmann, Heinz

    Die Volkszählung (Zensus) ist seit langem weltweit eine statistische Erhebung über Bevölkerung und Erwerbstätigkeit. In vielen Ländern wird sie heute in etwa 10jährigem Abstand durchgeführt. In Deutschland wurde sie in den 80er Jahren zum Politikum. Datenschutzängste, verbunden mit politischen Vorgängen (Friedensbewegung), erregten die Menschen, und das Bundesverfassungsgericht steckte neue Grenzen ab. Nach kontroversen Auseinandersetzungen, an denen die Deutsche Statistische Gesellschaft (DStatG) konstruktiv beteiligt war, kam es zur Volkszählung 1987. Den nachfolgenden Paradigmenwechsel hin zu einem registergestützten Zensus 2011 hat die DStatG ebenfalls kreativ mitgestaltet. Im Beitrag wird dieser Weg nachgezeichnet. Das neue Konzept wird vorgestellt und kritisch gewürdigt. Betroffen war auch der Mikrozensus als größte Bevölkerungs- und Arbeitsmarktstichprobe zwischen den Zensen. Nicht zuletzt durch das Wirken eines wissenschaftlichen Beirats, dessen Mitglieder von der DStatG vorgeschlagen wurden, blieb diese Erhebung in ihrem Kern für die Zukunft erhalten.

  20. Peak phosphorus - peak food? The need to close the phosphorus cycle.

    PubMed

    Rhodes, Christopher J

    2013-01-01

    The peak in the world production of phosphorus has been predicted to occur in 2033, based on world reserves of rock phosphate (URR) reckoned at around 24,000 million tonnes (Mt), with around 18,000 Mt remaining. This figure was reckoned-up to 71,000 Mt, by the USGS, in 2012, but a production maximum during the present century is still highly probable. There are complex issues over what the demand will be for phosphorus in the future, as measured against a rising population (from 7 billion to over 9 billion in 2050), and a greater per capita demand for fertiliser to grow more grain, in part to feed animals and meet a rising demand for meat by a human species that is not merely more populous but more affluent. As a counterweight to this, we may expect that greater efficiencies in the use of phosphorus - including recycling from farms and of human and animal waste - will reduce the per capita demand for phosphate rock. The unseen game changer is peak oil, since phosphate is mined and recovered using machinery powered by liquid fuels refined from crude oil. Hence, peak oil and peak phosphorus might appear as conjoined twins. There is no unequivocal case that we can afford to ignore the likelihood of a supply-demand gap for phosphorus occurring sometime this century, and it would be perilous to do so. PMID:23901632

  1. Peaking at Zero: Null Subjects and Other Indicators of Peak in Konni Texts.

    ERIC Educational Resources Information Center

    Cahill, Mike

    An analysis of story telling in Konni, a language spoken in Ghana, focused on how the climax of a story is characterized. The texts studied are six oral folk tales; two are appended, and portions of all are used as illustrations in the text of the report. First, the definition and characteristics of "peak," or climax of a story are discussed. This…

  2. Herstellung von Chitosan und einige Anwendungen

    NASA Astrophysics Data System (ADS)

    Struszczyk, Marcin Henryk

    2001-05-01

    1. Die Deacetylierung von crabshell - Chitosan führte gleichzeitig zu einem drastischen Abfall der mittleren viscosimetrischen Molmasse ( Mv), insbesondere wenn die Temperatur und die Konzentration an NaOH erhöht werden. Diese Parameter beeinflussten jedoch nicht den Grad der Deacetylierung (DD). Wichtig ist jedoch die Quelle des Ausgangsmaterials: Chitin aus Pandalus borealis ist ein guter Rohstoff für die Herstellung von Chitosan mit niedrigem DD und gleichzeitig hoher mittlerer Mv, während Krill-Chitin (Euphausia superba) ein gutes Ausgangsmaterial zur Herstellung von Chitosan mit hohem DD und niedrigem Mv ist. Chitosan, das aus Insekten (Calliphora erythrocephala), unter milden Bedingungen (Temperatur: 100°C, NaOH-Konzentration: 40 %, Zeit: 1-2h ) hergestellt wurde, hatte die gleichen Eigenschaften hinsichtlich DD und Mv wie das aus Krill hergestellte Chitosan. Der Bedarf an Zeit, Energie und NaOH ist für die Herstellung von Insekten-Chitosan geringer als für crabshell-Chitosan vergleichbare Resultaten für DD und Mv. 2. Chitosan wurde durch den Schimmelpilz Aspergillus fumigatus zu Chitooligomeren fermentiert. Die Ausbeute beträgt 25%. Die Chitooligomere wurden mit Hilfe von HPLC und MALDI-TOF-Massenspektrmetrie identifiziert. Die Fermentationsmischung fördert die Immunität von Pflanzen gegen Bakterien und Virusinfektion. Die Zunahme der Immunität schwankt jedoch je nach System Pflanze-Pathogen. Die Fermentation von Chitosan durch Aspergillus fumigatus könnte eine schnelle und billige Methode zur Herstellung von Chitooligomeren mit guter Reinheit und Ausbeute sein. Eine partiell aufgereinigte Fermentationsmischung dieser Art könnte in der Landwirtschaft als Pathogeninhibitor genutzt werden. Durch kontrollierte Fermentation, die Chitooligomere in definierter Zusammensetzung (d.h. definierter Verteilung des Depolymerisationsgrades) liefert, könnte man zu Mischungen kommen, die für die jeweilige Anwendung eine optimale Bioaktivität besitzen. 3

  3. NOx control buys to peak in `98

    SciTech Connect

    McIlvaine, R.W.

    1995-10-01

    Titles I and IV of the Clean Air Act provide the legislative framework for a huge NOx reduction program now in operation. This reduction will have a substantial effect in reducing ground-level ozone. A new McIlvaine report concludes that US utilities and industrial companies during the next 10 years will spend more than $800 million annually to meet CAA`s NOx-control regulations. Much of that investment will be for low-NOx burners, which minimize NOx formation. Many utilities and industrial boilers can be retrofitted with a new generation of burners; however, this technology achieves less than 50% NOx reduction. Post-combustion technologies, such as selective catalytic reduction and selective noncatalytic reduction, can reduce NOx as much as 90%. Therefore, plants needing greater NOx reduction will use post-combustion technologies, often in combination with low-NOx burners. The peak order year for NOx-control equipment will be 1998, primarily because Title IV of CAA requires utilities to comply by 2000. Many industrial sources also will be ordering equipment in 1998.

  4. North Twin Peak in super resolution

    NASA Technical Reports Server (NTRS)

    1997-01-01

    This pair of images shows the result of taking a sequence of 25 identical exposures from the Imager for Mars Pathfinder (IMP) of the northern Twin Peak, with small camera motions, and processing them with the Super-Resolution algorithm developed at NASA's Ames Research Center.

    The upper image is a representative input image, scaled up by a factor of five, with the pixel edges smoothed out for a fair comparison. The lower image allows significantly finer detail to be resolved.

    Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is an operating division of the California Institute of Technology (Caltech). The Imager for Mars Pathfinder (IMP) was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

    The super-resolution research was conducted by Peter Cheeseman, Bob Kanefsky, Robin Hanson, and John Stutz of NASA's Ames Research Center, Mountain View, CA. More information on this technology is available on the Ames Super Resolution home page at

    http://ic-www.arc.nasa.gov/ic/projects/bayes-group/ group/super-res/

  5. Vom Urknall zum Zerfall. Die Welt zwischen Anfang und Ende.

    NASA Astrophysics Data System (ADS)

    Fritzsch, H.

    Contents: Der Tanz mit dem Ozean. Galaktische Landkarte. Das Maß der Dinge. Der würfelnde Gott der Quantenphysik. Geheimnisvolle Felder. Materie und Antimaterie. Quarks - Urstoff unserer Welt. Zerfallende Protonen und die Einheit der Physik. Der Zauberofen. Das überschaubare Universum. Das explodierende Universum. Nachhall der Schöpfung. Der achtfache Weg der kosmischen Entwicklung. Das Ende der Welt. Einheit in der Vielfalt. Das geistige Universum. Gott und das absurde Universum.

  6. Surface sensitivity of elastic peak electron spectroscopy

    NASA Astrophysics Data System (ADS)

    Jablonski, A.

    2016-08-01

    New theoretical model describing the sampling depth of elastic peak electron spectroscopy (EPES) has been proposed. Surface sensitivity of this technique can be generally identified with the maximum depth reached by trajectories of elastically backscattered electrons. A parameter called the penetration depth distribution function (PDDF) has been proposed for this description. Two further parameters are descendant from this definition: the mean penetration depth (MPD) and the information depth (ID). From the proposed theory, relatively simple analytical expressions describing the above parameters can be derived. Although the Monte Carlo simulations can be effectively used to estimate the sampling depth of EPES, this approach may require a considerable amount of computations. In contrast, the analytical model proposed here (AN) is very fast and provides the parameters PDDF, MPD and ID that very well compare with results of MC simulations. As follows from detailed comparisons performed for four elements (Al, Ni, Pd and Au), the AN model practically reproduced complicated emission angle dependences of the MPDs and the IDs, correctly indicating numerous maximum and minimum positions. In the energy range from 200 eV to 5 keV, the averaged percentage differences between MPDs obtained from the MC and the AN models were close to 4%. An important conclusion resulting from the present studies refers to the procedure of determination of the inelastic mean free path (IMFP) from EPES. Frequently, the analyzed sample is deposited as a thin overlayer on a smooth substrate. From an analysis of the presently obtained IDs, is follows that 99% of trajectories in analyzed experimental configurations reaches depth not exceeding 2.39 in units of IMFP. Thus, one can postulate that a safe minimum thickness of an overlayer should be larger than about 3 IMFPs. For example, the minimum thickness of an Al overlayer shoud be about 8 nm at 5000 eV.

  7. Research Opportunities at Storm Peak Laboratory

    NASA Astrophysics Data System (ADS)

    Hallar, A. G.; McCubbin, I. B.

    2006-12-01

    The Desert Research Institute (DRI) operates a high elevation facility, Storm Peak Laboratory (SPL), located on the west summit of Mt. Werner in the Park Range near Steamboat Springs, Colorado at an elevation of 3210 m MSL (Borys and Wetzel, 1997). SPL provides an ideal location for long-term research on the interactions of atmospheric aerosol and gas- phase chemistry with cloud and natural radiation environments. The ridge-top location produces almost daily transition from free tropospheric to boundary layer air which occurs near midday in both summer and winter seasons. Long-term observations at SPL document the role of orographically induced mixing and convection on vertical pollutant transport and dispersion. During winter, SPL is above cloud base 25% of the time, providing a unique capability for studying aerosol-cloud interactions (Borys and Wetzel, 1997). A comprehensive set of continuous aerosol measurements was initiated at SPL in 2002. SPL includes an office-type laboratory room for computer and instrumentation setup with outside air ports and cable access to the roof deck, a cold room for precipitation and cloud rime ice sample handling and ice crystal microphotography, a 150 m2 roof deck area for outside sampling equipment, a full kitchen and two bunk rooms with sleeping space for nine persons. The laboratory is currently well equipped for aerosol and cloud measurements. Particles are sampled from an insulated, 15 cm diameter manifold within approximately 1 m of its horizontal entry point through an outside wall. The 4 m high vertical section outside the building is capped with an inverted can to exclude large particles.

  8. Das menschliche Gehör und Grundlagen der Psychoakustik

    NASA Astrophysics Data System (ADS)

    Genuit, Klaus; Sottek, Roland

    Das menschliche Gehör ist ein äußerst komplexes Empfangs- und Signalverarbeitungssystem. Es ist als Schallanalysator in Leistungsfähigkeit und Vielseitigkeit von technisch-analytischen Verfahren nach wie vor unerreicht. Die Signalverarbeitung läuft auf Grundlage komplexer Prozesse ab, die in ihrer Gesamtheit bislang nicht vollständig erfasst sind. Verschiedene Modelle zur gehörgerechten Zeit- und Frequenzanalyse ahmen jene komplexen Prozesse und Verarbeitungsmechanismen nach, die im menschlichen Gehör vollzogen werden.

  9. ITALIAN PEAK AND ITALIAN PEAK MIDDLE ROADLESS AREAS, IDAHO AND MONTANA.

    USGS Publications Warehouse

    Skipp, Betty; Lambeth, Robert H.

    1984-01-01

    The Italian Peak and Italian Peak Middle Roadless Areas, in southwestern Montana and east-central Idaho, contain areas of probable mineral-resource potential based on combined geologic, geophysical, and geochemical studies and prospect examination. Small areas along the western, southern, and northeastern boundaries of the roadless areas have probable mineral resource potential for zinc, lead, silver, and uranium. An area of probable resource potential just east of and including a part of the Birch Creek mining district, may contain stratabound and fault-controlled silver and base metals, even though geochemical anomalies are low, and extensive prospecting has not identified any significant mineralization. The roadless areas are a part of the overthrust belt, and oil and gas possibilities must be assessed.

  10. D-peaks: a visual tool to display ChIP-seq peaks along the genome.

    PubMed

    Brohée, Sylvain; Bontempi, Gianluca

    2012-01-01

    ChIP-sequencing is a method of choice to localize the positions of protein binding sites on DNA on a whole genomic scale. The deciphering of the sequencing data produced by this novel technique is challenging and it is achieved by their rigorous interpretation using dedicated tools and adapted visualization programs. Here, we present a bioinformatics tool (D-peaks) that adds several possibilities (including, user-friendliness, high-quality, relative position with respect to the genomic features) to the well-known visualization browsers or databases already existing. D-peaks is directly available through its web interface http://rsat.ulb.ac.be/dpeaks/ as well as a command line tool. PMID:23132505

  11. Automatic quality assessment and peak identification of auditory brainstem responses with fitted parametric peaks.

    PubMed

    Valderrama, Joaquin T; de la Torre, Angel; Alvarez, Isaac; Segura, Jose Carlos; Thornton, A Roger D; Sainz, Manuel; Vargas, Jose Luis

    2014-05-01

    The recording of the auditory brainstem response (ABR) is used worldwide for hearing screening purposes. In this process, a precise estimation of the most relevant components is essential for an accurate interpretation of these signals. This evaluation is usually carried out subjectively by an audiologist. However, the use of automatic methods for this purpose is being encouraged nowadays in order to reduce human evaluation biases and ensure uniformity among test conditions, patients, and screening personnel. This article describes a new method that performs automatic quality assessment and identification of the peaks, the fitted parametric peaks (FPP). This method is based on the use of synthesized peaks that are adjusted to the ABR response. The FPP is validated, on one hand, by an analysis of amplitudes and latencies measured manually by an audiologist and automatically by the FPP method in ABR signals recorded at different stimulation rates; and on the other hand, contrasting the performance of the FPP method with the automatic evaluation techniques based on the correlation coefficient, FSP, and cross correlation with a predefined template waveform by comparing the automatic evaluations of the quality of these methods with subjective evaluations provided by five experienced evaluators on a set of ABR signals of different quality. The results of this study suggest (a) that the FPP method can be used to provide an accurate parameterization of the peaks in terms of amplitude, latency, and width, and (b) that the FPP remains as the method that best approaches the averaged subjective quality evaluation, as well as provides the best results in terms of sensitivity and specificity in ABR signals validation. The significance of these findings and the clinical value of the FPP method are highlighted on this paper. PMID:24661606

  12. Peak-valley-peak pattern of histone modifications delineates active regulatory elements and their directionality.

    PubMed

    Pundhir, Sachin; Bagger, Frederik O; Lauridsen, Felicia B; Rapin, Nicolas; Porse, Bo T

    2016-05-19

    Formation of nucleosome free region (NFR) accompanied by specific histone modifications at flanking nucleosomes is an important prerequisite for enhancer and promoter activity. Due to this process, active regulatory elements often exhibit a distinct shape of histone signal in the form of a peak-valley-peak (PVP) pattern. However, different features of PVP patterns and their robustness in predicting active regulatory elements have never been systematically analyzed. Here, we present PARE, a novel computational method that systematically analyzes the H3K4me1 or H3K4me3 PVP patterns to predict NFRs. We show that NFRs predicted by H3K4me1 and me3 patterns are associated with active enhancers and promoters, respectively. Furthermore, asymmetry in the height of peaks flanking the central valley can predict the directionality of stable transcription at promoters. Using PARE on ChIP-seq histone modifications from four ENCODE cell lines and four hematopoietic differentiation stages, we identified several enhancers whose regulatory activity is stage specific and correlates positively with the expression of proximal genes in a particular stage. In conclusion, our results demonstrate that PVP patterns delineate both the histone modification landscape and the transcriptional activities governed by active enhancers and promoters, and therefore can be used for their prediction. PARE is freely available at http://servers.binf.ku.dk/pare. PMID:27095194

  13. Peak-valley-peak pattern of histone modifications delineates active regulatory elements and their directionality

    PubMed Central

    Pundhir, Sachin; Bagger, Frederik O.; Lauridsen, Felicia B.; Rapin, Nicolas; Porse, Bo T.

    2016-01-01

    Formation of nucleosome free region (NFR) accompanied by specific histone modifications at flanking nucleosomes is an important prerequisite for enhancer and promoter activity. Due to this process, active regulatory elements often exhibit a distinct shape of histone signal in the form of a peak-valley-peak (PVP) pattern. However, different features of PVP patterns and their robustness in predicting active regulatory elements have never been systematically analyzed. Here, we present PARE, a novel computational method that systematically analyzes the H3K4me1 or H3K4me3 PVP patterns to predict NFRs. We show that NFRs predicted by H3K4me1 and me3 patterns are associated with active enhancers and promoters, respectively. Furthermore, asymmetry in the height of peaks flanking the central valley can predict the directionality of stable transcription at promoters. Using PARE on ChIP-seq histone modifications from four ENCODE cell lines and four hematopoietic differentiation stages, we identified several enhancers whose regulatory activity is stage specific and correlates positively with the expression of proximal genes in a particular stage. In conclusion, our results demonstrate that PVP patterns delineate both the histone modification landscape and the transcriptional activities governed by active enhancers and promoters, and therefore can be used for their prediction. PARE is freely available at http://servers.binf.ku.dk/pare. PMID:27095194

  14. The accuracy of portable peak flow meters.

    PubMed Central

    Miller, M R; Dickinson, S A; Hitchings, D J

    1992-01-01

    BACKGROUND: The variability of peak expiratory flow (PEF) is now commonly used in the diagnosis and management of asthma. It is essential for PEF meters to have a linear response in order to obtain an unbiased measurement of PEF variability. As the accuracy and linearity of portable PEF meters have not been rigorously tested in recent years this aspect of their performance has been investigated. METHODS: The response of several portable PEF meters was tested with absolute standards of flow generated by a computer driven, servo controlled pump and their response was compared with that of a pneumotachograph. RESULTS: For each device tested the readings were highly repeatable to within the limits of accuracy with which the pointer position can be assessed by eye. The between instrument variation in reading for six identical devices expressed as a 95% confidence limit was, on average across the range of flows, +/- 8.5 l/min for the Mini-Wright, +/- 7.9 l/min for the Vitalograph, and +/- 6.4 l/min for the Ferraris. PEF meters based on the Wright meter all had similar error profiles with overreading of up to 80 l/min in the mid flow range from 300 to 500 l/min. This overreading was greatest for the Mini-Wright and Ferraris devices, and less so for the original Wright and Vitalograph meters. A Micro-Medical Turbine meter was accurate up to 400 l/min and then began to underread by up to 60 l/min at 720 l/min. For the low range devices the Vitalograph device was accurate to within 10 l/min up to 200 l/min, with the Mini-Wright overreading by up to 30 l/min above 150 l/min. CONCLUSION: Although the Mini-Wright, Ferraris, and Vitalograph meters gave remarkably repeatable results their error profiles for the full range meters will lead to important errors in recording PEF variability. This may lead to incorrect diagnosis and bias in implementing strategies of asthma treatment based on PEF measurement. PMID:1465746

  15. Supraleitung und Interkontinentalraketen „On-line computing“ zwischen Militär, Industrie und Wissenschaft

    NASA Astrophysics Data System (ADS)

    Knolle, Johannes; Joas, Christian

    Der zweite Weltkrieg und der Kalte Krieg veränderten nicht nur das Verhältnis zwischen Militär, Industrie und Wissenschaft, sondern auch die wissenschaftliche Praxis von Physikern und anderen Wissenschaftlern. In den 1950er Jahren stellte die Entwicklung von Interkontinentalraketen die Auftragnehmer des Militärs in der Industrie vor komplexe Fragestellungen, zu deren Lösung sie auf die Expertise von Wissenschaftlern angewiesen waren. Industrieunternehmen gründeten eigene Forschungseinheiten zur Lösung technischer und wissenschaftlicher Probleme.

  16. Darwin, Engels und die Rolle der Arbeit in der biologischen und kulturellen Evolution des Menschen

    NASA Astrophysics Data System (ADS)

    Reichholf, Josef H.

    Im Jahre 1876, 5 Jahre nach Erscheinen von Darwins Buch über die Evolution des Menschen und die sexuelle Selektion (Darwin 1871), veröffentlichte Friedrich Engels den berühmt gewordenen Essay "Anteil der Arbeit an der Menschwerdung des Affen“ (Engels 1876). Die Kernfrage darin lautet in Kurzform: Warum hat der Mensch eigentlich ein Bedürfnis nach Arbeit? Engels Antwort wird nachfolgend näher betrachtet und vom gegenwärtigen Kenntnisstand aus beurteilt. Wie sich zeigen wird, beantworten seine Überlegungen die Frage nicht wirklich. Sie ist weiterhin offen. Es können lediglich einige zusätzliche Anhaltspunkte zur Diskussion gestellt werden. Angesichts des drängenden Problems millionenfacher Arbeitslosigkeit und der Forderungen nach einem "Grundrecht auf Arbeit“ kommt den Überlegungen zum möglichen Ursprung des Bedürfnisses nach Arbeit mehr als nur akademisches Interesse zu.

  17. Haptische Modellierung und Deformation einer Kugelzelle

    NASA Astrophysics Data System (ADS)

    Schippritt, Darius; Wiemann, Martin; Lipinski, Hans-Gerd

    Haptische Simulationsmodelle dienen in der Medizin in erster Linie dem Training operativer Eingriffe. Sie basieren zumeist auf physikalischen Gewebemodellen, welche eine sehr genaue Simulation der biomechanischen Eigenschaften des betreffenden Gewebes erlauben, aber gleichzeitig sehr rechenintensiv und damit zeitaufwändig in der Ausführung sind. Die menschliche Wahrnehmung kann allerdings auch eine ungenaue haptische Modellierung psychooptisch ausgleichen. Daher kann es sinnvoll sein, haptische Simulationen auch mit nicht vollständig physikalisch definierten Deformationsmodellen durchzuführen. Am Beispiel der haptischer Simulation einer in-vitro Fertilisation wird gezeigt, dass durch die Anwendung eines geometrischen Deformationsmodells eine künstliche Befruchtung unter realistischen experimentellen Bedingungen in Echtzeit haptisch simuliert und damit trainiert werden kann.

  18. Newtons Principia Mathematica Philosophia und Plancks Elementarkonstanten

    NASA Astrophysics Data System (ADS)

    Rompe, R.; Treder, H.-J.

    Die Newtonschen Prinzipien, zusammen mit den Planckschen Elementarkonstanten, erweisen sich als gesichertes Fundament der Physik und der exakten Wissenschaften aller Richtungen.Der Begriffsfundus der Physik ist ausreichend für alle physikalischen aber auch weiterreichenden Probleme anderer Naturwissenschaften und Technik. Es zeigt sich, daß die klassische Physik von vornherein so angelegt wurde, daß sie über die Physik der makroskopischen Körper weit hinaus-greifen kann.Translated AbstractNewton's Principia Mathematica Philosophia and Planck's Elementary ConstantsTogether with Planck's elementary constants Newton's principles prove a guaranteed basis of physics and exact sciences of all directions.The conceptions in physics are competent at all physical problems as well as technology too. Classical physics was founded in such a way to reach far beyond the physics of macroscopic bodies.

  19. Biochips und ihr Einsatz in der Lebensmittelanalytik

    NASA Astrophysics Data System (ADS)

    Huber, Ingrid; Zeltz, Patric

    Mit der Verbreitung des Begriffes "Biochip“ in den biotechnologischen Medien wurde Ende der 1990er-Jahre zunächst der Eindruck erweckt, dass die Computerelektronik in die molekularbiologischen Anwendungen eingestiegen ist [18]. In nur wenigen Jahren hat sich die Biochiptechnologie zu einem Verfahren entwickelt, das aus der molekularbiologischen Grundlagenforschung nicht mehr wegzudenken ist und über eine Vielzahl von Einsatzbereichen verfügt. Die Biochiptechnologie ermöglicht die Miniaturisierung von DNA-, RNA- bzw. Proteinanalytik in hochparallelen Formaten. Dieser hohe Parallelisierungsgrad ist einer der wesentlichen Vorteile dieser Technik gegenüber klassischen molekularbiologischen Methoden. Sie wird heutzutage vor allem in der Genomforschung eingesetzt, für Genexpressionsstudien, zum Screening von single nucleotide polymorphisms (SNPs), in der pharmakogenetischen Forschung sowie in der Erforschung von Erbkrankheiten und in der Krebsforschung [1, 7, 19]. Neben vielen weiteren Bereichen finden Biochips auch spezielle Anwendungen in der Lebensmittelanalytik.

  20. Mol-Gastronomie Vinaigrettes und Benetzung

    NASA Astrophysics Data System (ADS)

    Vilgis, Thomas

    2005-03-01

    Dass wir Salatblätter mit einer Vinaigrette übergießen, hat natürlich einen kulinarischen Grund: Die Kombination von Essig und Öl verleiht Salat erheblich an Geschmack. Nicht nur durch deren Eigengeschmack, sondern auch durch die Lösungseigenschaften von Geschmacksstoffen. Allerdings liefern Salatsaucen auch einen physikalischen Grund für ihre Beliebtheit: die Benetzungsfähigkeit der Blätter.

  1. 7 CFR 457.163 - Nursery peak inventory endorsement.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... completed Peak Inventory Value Report is received by us. Coverage term. A period of time that begins on the... otherwise modify any other provision of your Nursery Crop Insurance Policy. 4. Peak Insurance Period... 7 Agriculture 6 2014-01-01 2014-01-01 false Nursery peak inventory endorsement. 457.163...

  2. 7 CFR 457.163 - Nursery peak inventory endorsement.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... completed Peak Inventory Value Report is received by us. Coverage term. A period of time that begins on the... otherwise modify any other provision of your Nursery Crop Insurance Policy. 4. Peak Insurance Period... 7 Agriculture 6 2012-01-01 2012-01-01 false Nursery peak inventory endorsement. 457.163...

  3. 7 CFR 457.163 - Nursery peak inventory endorsement.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... completed Peak Inventory Value Report is received by us. Coverage term. A period of time that begins on the... otherwise modify any other provision of your Nursery Crop Insurance Policy. 4. Peak Insurance Period... 7 Agriculture 6 2011-01-01 2011-01-01 false Nursery peak inventory endorsement. 457.163...

  4. Peak Shift Phenomenon: A Teaching Activity for Basic Learning Theory

    ERIC Educational Resources Information Center

    Keith, Kenneth D.

    2002-01-01

    Stimulus discrimination is a standard subject in undergraduate courses presenting basic principles of learning, and a particularly interesting aspect of discrimination is the peak shift phenomenon. Peak shift occurs in generalization tests following intradimensional discrimination training as a displacement of peak responding away from the S+ (a…

  5. Reward Value Effects on Timing in the Peak Procedure

    ERIC Educational Resources Information Center

    Galtress, Tiffany; Kirkpatrick, Kimberly

    2009-01-01

    Three experiments examined the effect of motivational variables on timing in the peak procedure. In Experiment 1, rats received a 60-s peak procedure that was coupled with long-term, between-phase changes in reinforcer magnitude. Increases in reinforcer magnitude produced a leftward shift in the peak that persisted for 20 sessions of training. In…

  6. 7 CFR 457.163 - Nursery peak inventory endorsement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Nursery peak inventory endorsement. 457.163 Section... CORPORATION, DEPARTMENT OF AGRICULTURE COMMON CROP INSURANCE REGULATIONS § 457.163 Nursery peak inventory endorsement. Nursery Crop Insurance Peak Inventory Endorsement This endorsement is not continuous and must...

  7. Peak water limits to freshwater withdrawal and use

    PubMed Central

    Gleick, Peter H.; Palaniappan, Meena

    2010-01-01

    Freshwater resources are fundamental for maintaining human health, agricultural production, economic activity as well as critical ecosystem functions. As populations and economies grow, new constraints on water resources are appearing, raising questions about limits to water availability. Such resource questions are not new. The specter of “peak oil”—a peaking and then decline in oil production—has long been predicted and debated. We present here a detailed assessment and definition of three concepts of “peak water”: peak renewable water, peak nonrenewable water, and peak ecological water. These concepts can help hydrologists, water managers, policy makers, and the public understand and manage different water systems more effectively and sustainably. Peak renewable water applies where flow constraints limit total water availability over time. Peak nonrenewable water is observable in groundwater systems where production rates substantially exceed natural recharge rates and where overpumping or contamination leads to a peak of production followed by a decline, similar to more traditional peak-oil curves. Peak “ecological” water is defined as the point beyond which the total costs of ecological disruptions and damages exceed the total value provided by human use of that water. Despite uncertainties in quantifying many of these costs and benefits in consistent ways, more and more watersheds appear to have already passed the point of peak water. Applying these concepts can help shift the way freshwater resources are managed toward more productive, equitable, efficient, and sustainable use. PMID:20498082

  8. Instandhaltung und Plant Asset Management - zwei Welten?

    NASA Astrophysics Data System (ADS)

    Horch, Alexander

    Der Begriff des Asset Management wird nicht mehr nur in der Finanzwelt gebraucht, sondern seit einigen Jahren auch zunehmend in der produzierenden Industrie, insbesondere in der Prozessindustrie. Die Interessengemeinschaft Automatisierungstechnik der Prozessindustrie, NAMUR, hat bereits im Jahr 2001 eine entsprechende Empfehlung zum Thema anlagennahes Asset Management (Plant Asset Management) vorgelegt. In dieser Empfehlung (NAMUR NE 91) taucht der Begriff 'Instandhaltung' in verschiedener Verwendung 15 Mal auf. Die klassische Instandhaltung ist seit vielen Jahren wohl etabliert und definiert, was die große Anzahl Richtlinien, Beschreibungen und Standards belegt (DIN 31051, VDI 2884, VDI 2888, VDI 2889, VDI 2890). Eine oft geäußerte Kritik dem Plant Asset Management gegenüber ist, dass im Grunde nichts Neues angeboten wird, über die Instandhaltung hinaus. Auf der anderen Seite wird das Plant Asset Management seit über zehn Jahren vermehrt gebraucht und etabliert. Dieser scheinbare Widerspruch soll in diesem Beitrag ausgeräumt werden. Als Motivation sollen drei Beispiele kurz beschrieben werden.

  9. Therapeutisches Management kutaner und genitaler Warzen.

    PubMed

    Ockenfels, Hans Michael

    2016-09-01

    Mindestens 10 % der Bevölkerung erkranken während ihres Lebens an einer Infektion mit humanen Papillomaviren (HPV), welche sich klinisch anhand der Ausbildung kutaner oder genitaler Warzen manifestiert. Obwohl Warzen ubiquitär sind, existieren keine definierten Behandlungen. Warzen zeigen, insbesondere in den ersten sechs Monaten, eine erhöhte Selbstheilungsrate. Dieser Umstand erschwert die Interpretation von Studien, da häufig Patienten mit Neuinfektionen zusammen mit Patienten mit Altinfektionen behandelt werden. Lokalisationen, Größe und Dicke der Warzen sind ebenfalls in den meisten Fällen nicht berücksichtigt. Ziel dieses Übersichtsartikels ist eine Analyse des vorliegenden Studienmaterials, unter der für den klinischen Alltag so wichtigen Berücksichtigung von Subtypen und Lokalisationen. Insbesondere die Abgrenzung zwischen frischen und chronisch-therapieresistenten Verrucae vulgares spiegelt sich in einem Therapiealgorithmus wider. Bei genitalen Warzen wird der Therapiealgorithmus deutlicher durch das Ausmaß der infizierten Fläche als durch das Alter der Warzen bestimmt. Bei immunkompetenten Personen muss es mit den hier aufgezeigten therapeutischen Methoden immer das Ziel sein, eine komplette Abheilung zu erzielen. PMID:27607029

  10. Elektronische Citizen Cards in Deutschland und Europa

    NASA Astrophysics Data System (ADS)

    Kowalski, Bernd

    Meine sehr geehrten Damen und Herren, der Bedarf an elektronischen Identitäten entsteht durch die wachsende Mobilität der Gesellschaft bei einem gleichzeitig steigenden Bedarf an Onlinepräsenz. Diese elektronischen Identitäten machen natürlich auch vor den staatlichen Ausweisen nicht halt, wie zum Beispiel dem Reisepass, aber auch dem Personalausweis und weiteren Ausweisdokumenten. Wobei es bei den staatlich herausgegebenen oder kontrollierten Ausweisen immer um zwei verschiedene Dinge geht: Einmal um die hoheitliche Funktion, wie zum Beispiel beim Reisepass. Hier geht es zum Beispiel darum, in einem Europa mit gefallenen Grenzen und bei freiem Reiseverkehr für alle Personen, die in diesem Raum wohnen, insbesondere auch im Schengener Raum, die Möglichkeit zu schaffen, auch künftig noch Personenkontrollen durchzuführen. Auch der Reiseverkehr über die europäischen Grenzen hinaus ist insofern ein Problem, da die Identitätenprüfung an den Grenzkontrollen immer schwieriger wird. Deswegen braucht man an dieser Stelle Möglichkeiten, um eine Personenüberprüfung durchzuführen, um feststellen zu können, dass diese Person auch zum Dokument gehört.

  11. Gas compression in lungs decreases peak expiratory flow depending on resistance of peak flowmeter.

    PubMed

    Pedersen, O F; Pedersen, T F; Miller, M R

    1997-11-01

    It has recently been shown (O. F. Pedersen T. R. Rasmussen, O. Omland, T. Sigsgaard, P. H. Quanjer. and M. R. Miller. Eur. Respir. J. 9: 828-833, 1996) that the added resistance of a mini-Wright peak flowmeter decreases peak expiratory flow (PEF) by approximately 8% compared with PEF measured by a pneumotachograph. To explore the reason for this, 10 healthy men (mean age 43 yr, range 33-58 yr) were examined in a body plethysmograph with facilities to measure mouth flow vs. expired volume as well as the change in thoracic gas volume (Vb) and alveolar pressure (PA). The subjects performed forced vital capacity maneuvers through orifices of different sizes and also a mini-Wright peak flowmeter. PEF with the meter and other added resistances were achieved when flow reached the perimeter of the flow-Vb curves. The mini-Wright PEF meter decreased PEF from 11.4 +/- 1.5 to 10.3 +/- 1.4 (SD) l/s (P < 0.001), PA increased from 6.7 +/- 1.9 to 9.3 +/- 2.7 kPa (P < 0.001), an increase equal to the pressure drop across the meter, and caused Vb at PEF to decrease by 0.24 +/- 0.09 liter (P < 0.001). We conclude that PEF obtained with an added resistance like a mini-Wright PEF meter is a wave-speed-determined maximal flow, but the added resistance causes gas compression because of increased PA at PEF. Therefore, Vb at PEF and, accordingly, PEF decrease. PMID:9375314

  12. Peak expiratory flow at increased barometric pressure: comparison of peak flow meters and volumetric spirometer.

    PubMed

    Thomas, P S; Ng, C; Bennett, M

    2000-01-01

    Increasing numbers of patients are receiving hyperbaric oxygen therapy as an intensive care treatment, some of whom have pre-existing airway obstruction. Spirometers are the ideal instruments for measuring airway obstruction, but peak flow meters are useful and versatile devices. The behaviour of both types of device was therefore studied in a hyperbaric unit under conditions of increased pressure. It is important to have a non-electrical indicator of airway obstruction, to minimize the fire risk in the hyperoxic environment. The hypothesis was tested that, assuming that dynamic resistance is unchanged, both the Wright's standard and mini-peak flow meters would over-read peak expiratory flow (PEF) under increased pressure when compared with a volumetric spirometer, as the latter is unaffected by air density. It was postulated that a correction factor could be derived so that PEF meters could be used in this setting. Seven normal subjects performed volume-dependent spirometry to derive PEF, and manoeuvres using both standard and mini PEF meters at sea level, under hyperbaric conditions at 303, 253 and 152 kPa (3, 2.5 and 1.5 atmospheres respectively; 1 atmosphere absolute=101.08 kPa), and again at sea level. There was a progressive and significant decline in PEF with increasing pressure as measured by the spirometer (69.46+/-0.8% baseline at 303 kPa compared with 101 kPa), while the PEF meters showed a progressive increase in their readings (an increase of 7.86+/-1.69% at 303 kPa with the mini PEF meter). Using these data points, a correction factor was derived which allows appropriate values to be calculated from the Wright's meter readings under these conditions. PMID:10600666

  13. Herstellung von Chitosan und einige Anwendungen

    NASA Astrophysics Data System (ADS)

    Struszczyk, Marcin Henryk

    2001-05-01

    1. Die Deacetylierung von crabshell - Chitosan führte gleichzeitig zu einem drastischen Abfall der mittleren viscosimetrischen Molmasse ( Mv), insbesondere wenn die Temperatur und die Konzentration an NaOH erhöht werden. Diese Parameter beeinflussten jedoch nicht den Grad der Deacetylierung (DD). Wichtig ist jedoch die Quelle des Ausgangsmaterials: Chitin aus Pandalus borealis ist ein guter Rohstoff für die Herstellung von Chitosan mit niedrigem DD und gleichzeitig hoher mittlerer Mv, während Krill-Chitin (Euphausia superba) ein gutes Ausgangsmaterial zur Herstellung von Chitosan mit hohem DD und niedrigem Mv ist. Chitosan, das aus Insekten (Calliphora erythrocephala), unter milden Bedingungen (Temperatur: 100°C, NaOH-Konzentration: 40 %, Zeit: 1-2h ) hergestellt wurde, hatte die gleichen Eigenschaften hinsichtlich DD und Mv wie das aus Krill hergestellte Chitosan. Der Bedarf an Zeit, Energie und NaOH ist für die Herstellung von Insekten-Chitosan geringer als für crabshell-Chitosan vergleichbare Resultaten für DD und Mv. 2. Chitosan wurde durch den Schimmelpilz Aspergillus fumigatus zu Chitooligomeren fermentiert. Die Ausbeute beträgt 25%. Die Chitooligomere wurden mit Hilfe von HPLC und MALDI-TOF-Massenspektrmetrie identifiziert. Die Fermentationsmischung fördert die Immunität von Pflanzen gegen Bakterien und Virusinfektion. Die Zunahme der Immunität schwankt jedoch je nach System Pflanze-Pathogen. Die Fermentation von Chitosan durch Aspergillus fumigatus könnte eine schnelle und billige Methode zur Herstellung von Chitooligomeren mit guter Reinheit und Ausbeute sein. Eine partiell aufgereinigte Fermentationsmischung dieser Art könnte in der Landwirtschaft als Pathogeninhibitor genutzt werden. Durch kontrollierte Fermentation, die Chitooligomere in definierter Zusammensetzung (d.h. definierter Verteilung des Depolymerisationsgrades) liefert, könnte man zu Mischungen kommen, die für die jeweilige Anwendung eine optimale Bioaktivität besitzen. 3

  14. Memory Effect Manifested by a Boson Peak in Metallic Glass.

    PubMed

    Luo, P; Li, Y Z; Bai, H Y; Wen, P; Wang, W H

    2016-04-29

    We explore the correlation between a boson peak and structural relaxation in a typical metallic glass. Consistent with enthalpy recovery, a boson peak shows a memory effect in an aging-and-scan procedure. Single-step isothermal aging produces a monotonic decrease of enthalpy and boson peak intensity; for double-step isothermal aging, both enthalpy and boson peak intensity experience, coincidently, an incipient increase to a maximum and a subsequent decrease toward the equilibrium state. Our results indicate a direct link between slow structural relaxation and fast boson peak dynamics, which presents a profound understanding of the two dynamic behaviors in glass. PMID:27176528

  15. Memory Effect Manifested by a Boson Peak in Metallic Glass

    NASA Astrophysics Data System (ADS)

    Luo, P.; Li, Y. Z.; Bai, H. Y.; Wen, P.; Wang, W. H.

    2016-04-01

    We explore the correlation between a boson peak and structural relaxation in a typical metallic glass. Consistent with enthalpy recovery, a boson peak shows a memory effect in an aging-and-scan procedure. Single-step isothermal aging produces a monotonic decrease of enthalpy and boson peak intensity; for double-step isothermal aging, both enthalpy and boson peak intensity experience, coincidently, an incipient increase to a maximum and a subsequent decrease toward the equilibrium state. Our results indicate a direct link between slow structural relaxation and fast boson peak dynamics, which presents a profound understanding of the two dynamic behaviors in glass.

  16. Mol-Gastronomie Granulare Fleischgerichte und molekulares Kleben

    NASA Astrophysics Data System (ADS)

    Vilgis, Thomas A.

    2005-09-01

    Buletten, Fleischküchle oder Kebabs, Köstlichkeiten aus gehacktem Fleisch bestimmter Körnung, finden sich in allen Kulturen. Physikalisch ein großes Problem, denn zu Tisch dürfen diese Gebilde nicht auseinander brechen und zerfallen. Für ausreichend Bindung und Klebung muss also gesorgt werden.

  17. Study on peak shape fitting method in radon progeny measurement.

    PubMed

    Yang, Jinmin; Zhang, Lei; Abdumomin, Kadir; Tang, Yushi; Guo, Qiuju

    2015-11-01

    Alpha spectrum measurement is one of the most important methods to measure radon progeny concentration in environment. However, the accuracy of this method is affected by the peak tailing due to the energy losses of alpha particles. This article presents a peak shape fitting method that can overcome the peak tailing problem in most situations. On a typical measured alpha spectrum curve, consecutive peaks overlap even their energies are not close to each other, and it is difficult to calculate the exact count of each peak. The peak shape fitting method uses combination of Gaussian and exponential functions, which can depict features of those peaks, to fit the measured curve. It can provide net counts of each peak explicitly, which was used in the Kerr method of calculation procedure for radon progeny concentration measurement. The results show that the fitting curve fits well with the measured curve, and the influence of the peak tailing is reduced. The method was further validated by the agreement between radon equilibrium equivalent concentration based on this method and the measured values of some commercial radon monitors, such as EQF3220 and WLx. In addition, this method improves the accuracy of individual radon progeny concentration measurement. Especially for the (218)Po peak, after eliminating the peak tailing influence, the calculated result of (218)Po concentration has been reduced by 21 %. PMID:25920795

  18. Der neue Kosmos. Einführung in die Astronomie und Astrophysik

    NASA Astrophysics Data System (ADS)

    Unsöld, Albrecht; Baschek, Bodo

    Der neue Kosmos bietet in überschaubarem Umfang eine zusammenhängende Einführung in das Gesamtgebiet der Astronomie und Astrophysik. Aus den Bereichen: Klassische Astronomie und Planetensystem, Instrumente und Beobachtungsverfahren, Sonne und Sterne, Milchstraße und Galaxien, Kosmologie, Entstehung des Planetensystems, Entwicklung der Erde und des Lebens werden die Beobachtungsmethoden und die Ergebnisse astronomischer Forschung sowie deren theoretische Grundlagen und wechselseitigen Zusammenhänge vermittelt. Die aktualisierte 7. Auflage berücksichtigt den raschen Fortschritt astronomischer Forschung der letzten drei Jahre von unserem Planetensystem und den Entdeckungen zahlreicher Planeten bei anderen Sternen, über die fernsten Galaxien und Quasare bis zur Entwicklung der modernen Kosmologie.

  19. Renaturierung von subalpinen und alpinen Ökosystemen

    NASA Astrophysics Data System (ADS)

    Krautzer, B.; Klug, Brigitte

    Die große Vielfalt an alpinen und subalpinen Ökosystemen auf waldfreien Standorten stellt besonders hohe Anforderungen an Planung und Durchführung von Renaturierungsmaßnahmen. Zunehmende Meereshöhe, starke Hangneigungen und extreme klimatische Verhältnisse im Gebirge bedingen zudem seit jeher natürliche Erosionsprozesse. Die zahllosen menschlichen Aktivitäten der letzten Jahrzehnte, gepaart mit unzureichenden Begrünungsmaßnahmen, erhöhen dieses Risiko noch um ein Vielfaches: Geländekorrekturen im Zuge von Skipistenbauten, Almrevitalisierungen, Forst- und Almwegebauten, Maßnahmen zur Verbesserung der touristischen Infrastruktur oder Wildbach- und Lawinenverbauungen. Nur durch Verwendung von hochwertigem, dem Standort angepasstem Pflanzen-oder Saatgutmaterial in Kombination mit der passenden Begrünungstechnik kann dieser Bedrohung dauerhaft entgegengewirkt werden. Dabei sind folgende limitierende Faktoren besonders zu beachten.

  20. Intelligent produzieren - Prozesse verstehen und mit innovativen Werkzeugen verbessern

    NASA Astrophysics Data System (ADS)

    Kress, Dieter

    Im Umfeld der stetig fortschreitenden Globalisierung und der damit verbundenen Verlagerung von Produktionsstätten und dem Transfer bekannter Technologien ist eine stetige Weiterentwicklung der Fertigungstechnik unumgänglich, um auch zukünftig am Standort Deutschland einen Technologievorsprung zu halten und Produkte zu fertigen, die weltweit konkurrenzfähig sind. Die Notwendigkeit zur permanenten Innovation ist unbestritten. Das Ziel muss es dabei sein, die Produktivität zu erhöhen, die Qualität der Produkte auf stets hohem Niveau zu halten bzw. die Qualität noch weiter zu steigern und gleichzeitig die Kosten stetig zu senken. Dies erfordert intelligente und innovative Werkzeugkonzepte für die Hochleistungsfertigung.

  1. Biokompatible Implantate und Neuentwicklungen in der Gynäkologie

    NASA Astrophysics Data System (ADS)

    Jacobs, Volker R.; Kiechle, Marion

    Für den Einsatz in der Gynäkologie stehen heute eine Vielzahl unterschiedlicher, biokompatibler Materialien und Implantate zur Verfügung. Auf eine Auswahl soll hier näher eingegangen werden, die die verschiedenen Materialien und Bauweisen repräsentieren. So sind Brustimplantate seit fast vier Jahrzehnten im Gebrauch für die Brustvergrösserung und den Brustwiederaufbau. Material, Bauweisen und medizinische Aspekte einschliesslich der kontroversen Diskussion um Silikon werden im folgenden erläutert. Neuere Entwicklungen von Verhütungstechniken für permanente Sterilisation wie den Filshie ClipTM für transabdominalen und den STOPTM für intraluminalen Verschluss der Eileiter oder die intrauterin plazierte Hormonspirale MirenaTM für zeitlich begrenzte Verhütung werden beschrieben. Eine neue Perspektive zur Verhinderung postoperativer intraabdominaler Adhäsionen stellt Spray-GelTM, ein Zweikomponenten Hydrogel aus Polyethylenglykol, dar.

  2. Towards highest peak intensities for ultra-short MeV-range ion bunches

    PubMed Central

    Busold, Simon; Schumacher, Dennis; Brabetz, Christian; Jahn, Diana; Kroll, Florian; Deppert, Oliver; Schramm, Ulrich; Cowan, Thomas E.; Blažević, Abel; Bagnoud, Vincent; Roth, Markus

    2015-01-01

    A laser-driven, multi-MeV-range ion beamline has been installed at the GSI Helmholtz center for heavy ion research. The high-power laser PHELIX drives the very short (picosecond) ion acceleration on μm scale, with energies ranging up to 28.4 MeV for protons in a continuous spectrum. The necessary beam shaping behind the source is accomplished by applying magnetic ion lenses like solenoids and quadrupoles and a radiofrequency cavity. Based on the unique beam properties from the laser-driven source, high-current single bunches could be produced and characterized in a recent experiment: At a central energy of 7.8 MeV, up to 5 × 108 protons could be re-focused in time to a FWHM bunch length of τ = (462 ± 40) ps via phase focusing. The bunches show a moderate energy spread between 10% and 15% (ΔE/E0 at FWHM) and are available at 6 m distance to the source und thus separated from the harsh laser-matter interaction environment. These successful experiments represent the basis for developing novel laser-driven ion beamlines and accessing highest peak intensities for ultra-short MeV-range ion bunches. PMID:26212024

  3. Towards highest peak intensities for ultra-short MeV-range ion bunches.

    PubMed

    Busold, Simon; Schumacher, Dennis; Brabetz, Christian; Jahn, Diana; Kroll, Florian; Deppert, Oliver; Schramm, Ulrich; Cowan, Thomas E; Blažević, Abel; Bagnoud, Vincent; Roth, Markus

    2015-01-01

    A laser-driven, multi-MeV-range ion beamline has been installed at the GSI Helmholtz center for heavy ion research. The high-power laser PHELIX drives the very short (picosecond) ion acceleration on μm scale, with energies ranging up to 28.4 MeV for protons in a continuous spectrum. The necessary beam shaping behind the source is accomplished by applying magnetic ion lenses like solenoids and quadrupoles and a radiofrequency cavity. Based on the unique beam properties from the laser-driven source, high-current single bunches could be produced and characterized in a recent experiment: At a central energy of 7.8 MeV, up to 5 × 10(8) protons could be re-focused in time to a FWHM bunch length of τ = (462 ± 40) ps via phase focusing. The bunches show a moderate energy spread between 10% and 15% (ΔE/E0 at FWHM) and are available at 6 m distance to the source und thus separated from the harsh laser-matter interaction environment. These successful experiments represent the basis for developing novel laser-driven ion beamlines and accessing highest peak intensities for ultra-short MeV-range ion bunches. PMID:26212024

  4. Towards highest peak intensities for ultra-short MeV-range ion bunches

    NASA Astrophysics Data System (ADS)

    Busold, Simon; Schumacher, Dennis; Brabetz, Christian; Jahn, Diana; Kroll, Florian; Deppert, Oliver; Schramm, Ulrich; Cowan, Thomas E.; Blažević, Abel; Bagnoud, Vincent; Roth, Markus

    2015-07-01

    A laser-driven, multi-MeV-range ion beamline has been installed at the GSI Helmholtz center for heavy ion research. The high-power laser PHELIX drives the very short (picosecond) ion acceleration on μm scale, with energies ranging up to 28.4 MeV for protons in a continuous spectrum. The necessary beam shaping behind the source is accomplished by applying magnetic ion lenses like solenoids and quadrupoles and a radiofrequency cavity. Based on the unique beam properties from the laser-driven source, high-current single bunches could be produced and characterized in a recent experiment: At a central energy of 7.8 MeV, up to 5 × 108 protons could be re-focused in time to a FWHM bunch length of τ = (462 ± 40) ps via phase focusing. The bunches show a moderate energy spread between 10% and 15% (ΔE/E0 at FWHM) and are available at 6 m distance to the source und thus separated from the harsh laser-matter interaction environment. These successful experiments represent the basis for developing novel laser-driven ion beamlines and accessing highest peak intensities for ultra-short MeV-range ion bunches.

  5. Strahlen-und kinetische Waffen: Neue Waffentechniken und Rüstungskontrolle

    NASA Astrophysics Data System (ADS)

    Neuneck, Götz

    Laserstrahlen, Mikrowellen oder elektromagnetische Beschleuniger lassen sich nicht nur für zivile, sondern für militärische Zwecke einsetzen. Die Aufgabe einer vorbeugenden Rüstungskontrolle wäre es, diese wie andere künftige Waffentechnologien auf ihren destabilisierenden Charakter hin zu untersuchen und ihre Stationierung zu beschränken oder zu verhindern.

  6. Relationships between Electroencephalographic Spectral Peaks Across Frequency Bands

    PubMed Central

    van Albada, S. J.; Robinson, P. A.

    2013-01-01

    The degree to which electroencephalographic spectral peaks are independent, and the relationships between their frequencies have been debated. A novel fitting method was used to determine peak parameters in the range 2–35 Hz from a large sample of eyes-closed spectra, and their interrelationships were investigated. Findings were compared with a mean-field model of thalamocortical activity, which predicts near-harmonic relationships between peaks. The subject set consisted of 1424 healthy subjects from the Brain Resource International Database. Peaks in the theta range occurred on average near half the alpha peak frequency, while peaks in the beta range tended to occur near twice and three times the alpha peak frequency on an individual-subject basis. Moreover, for the majority of subjects, alpha peak frequencies were significantly positively correlated with frequencies of peaks in the theta and low and high beta ranges. Such a harmonic progression agrees semiquantitatively with theoretical predictions from the mean-field model. These findings indicate a common or analogous source for different rhythms, and help to define appropriate individual frequency bands for peak identification. PMID:23483663

  7. The relevance of food peak architecture in trophic interactions.

    PubMed

    Vatka, Emma; Orell, Markku; Rytkönen, Seppo

    2016-04-01

    Phenological shifts and associated changes in the temporal match between trophic levels have been a major focus of the study of ecological consequences of climate change. Previously, the food peak has been thought to respond as an entity to warming temperatures. However, food peak architecture, that is, timings and abundances of prey species and the level of synchrony between them, determines the timing and shape of the food peak. We demonstrate this with a case example of three passerine prey species and their predator. We explored temporal trends in the timing, height, width, and peakedness of prey availabilities and explained their variation with food peak architecture and ambient temperatures of prebreeding and breeding seasons. We found a temporal match between the predator's breeding schedule and food availability. Temporal trends in the timing of the food peak or in the synchrony between the prey species were not found. However, the food peak has become wider and more peaked over time. With more peaked food availabilities, predator's breeding success will depend more on the temporal match between its breeding schedule and the food peak, ultimately affecting the timing of breeding in the predator population. The height and width of the food peak depended on the abundances and breeding season lengths of individual prey species and their reciprocal synchronies. Peakednesses of separate prey species' availability distributions alone explained the peakedness of the food peak. Timing and quantity of food production were associated with temperatures of various time periods with variable relevance in different prey species. Alternating abundances of early and late breeding prey species caused high annual fluctuation in the timing of the food peak. Interestingly, the food peak may become later even when prey species' schedules are advanced. Climate warming can thus produce unexpected changes in the food availabilities, intervening in trophic interactions. PMID

  8. A compact nonlinear fiber-based optical autocorrelation peak discriminator.

    PubMed

    Fok, M P; Deng, Y; Prucnal, P R

    2009-06-01

    We experimentally demonstrate a nonlinear fiber-based optical autocorrelation peak discriminator. The approach exploits four-wave mixing in a 37-cm highly-nonlinear bismuth-oxide fiber that provides a passive and compact means for rejecting cross-correlation peaks. The autocorrelation peak discriminator plays an important role in improving the detection of optical CDMA signals. Eye diagrams and bit-error rates are measured at different power ratios. Significant receiver sensitivity improvements are obtained and error-floors are removed. The experimental results show that the autocorrelation peak discriminator works well even when the amplitudes of individual cross-correlation peaks are higher than that of the autocorrelation peak. PMID:19506641

  9. Force Irregularity Following Maximal Effort: The After-Peak Reduction.

    PubMed

    Doucet, Barbara M; Mettler, Joni A; Griffin, Lisa; Spirduso, Waneen

    2016-08-01

    Irregularities in force output are present throughout human movement and can impair task performance. We investigated the presence of a large force discontinuity (after-peak reduction, APR) that appeared immediately following peak in maximal effort ramp contractions performed with the thumb adductor and ankle dorsiflexor muscles in 25 young adult participants (76% males, 24% females; M age 24.4 years, SD = 7.1). The after-peak reduction displayed similar parameters in both muscle groups with comparable drops in force during the after-peak reduction minima (thumb adductor: 27.5 ± 7.5% maximal voluntary contraction; ankle dorsiflexor: 25.8 ± 6.2% maximal voluntary contraction). A trend for the presence of fewer after-peak reductions with successive ramp trials was observed, suggesting a learning effect. Further investigation should explore underlying neural mechanisms contributing to the after-peak reduction. PMID:27502241

  10. Snoek peaks of carbon in Fe-Ni meteorites.

    NASA Astrophysics Data System (ADS)

    Weller, M.; Wert, C.

    1996-12-01

    Most Fe-Ni meteorites are a two phase mixture of fcc and bcc phases. The authors secured six samples of Fe contents from 95% to 85% all of which were thought to contain small amounts of carbon. They found no Snoek peaks in the as-received condition for any of the six. After being heated and cooled, three showed pronounced Snoek peaks, three showed no Snoek peaks.

  11. Gamma-ray peak shapes from cadmium zinc telluride detectors

    SciTech Connect

    Namboodiri, M.N.; Lavietes, A.D.; McQuaid, J.H.

    1996-09-01

    We report the results of a study of the peak shapes in the gamma spectra measured using several 5 x 5 x 5 mm{sup 3} cadmium zinc telluride (CZT) detectors. A simple parameterization involving a Gaussian and an exponential low energy tail describes the peak shapes sell. We present the variation of the parameters with gamma energy. This type of information is very useful in the analysis of complex gamma spectra consisting of many peaks.

  12. Peak experiences of psilocybin users and non-users.

    PubMed

    Cummins, Christina; Lyke, Jennifer

    2013-01-01

    Maslow (1970) defined peak experiences as the most wonderful experiences of a person's life, which may include a sense of awe, well-being, or transcendence. Furthermore, recent research has suggested that psilocybin can produce experiences subjectively rated as uniquely meaningful and significant (Griffiths et al. 2006). It is therefore possible that psilocybin may facilitate or change the nature of peak experiences in users compared to non-users. This study was designed to compare the peak experiences of psilocybin users and non-users, to evaluate the frequency of peak experiences while under the influence of psilocybin, and to assess the perceived degree of alteration of consciousness during these experiences. Participants were recruited through convenience and snowball sampling from undergraduate classes and at a musical event. Participants were divided into three groups, those who reported a peak experience while under the influence of psilocybin (psilocybin peak experience: PPE), participants who had used psilocybin but reported their peak experiences did not occur while they were under the influence of psilocybin (non-psilocybin peak experience: NPPE), and participants who had never used psilocybin (non-user: NU). A total of 101 participants were asked to think about their peak experiences and complete a measure evaluating the degree of alteration of consciousness during that experience. Results indicated that 47% of psilocybin users reported their peak experience occurred while using psilocybin. In addition, there were significant differences among the three groups on all dimensions of alteration of consciousness. Future research is necessary to identify factors that influence the peak experiences of psilocybin users in naturalistic settings and contribute to the different characteristics of peak experiences of psilocybin users and non-users. PMID:23909006

  13. Zener Relaxation Peak in an Fe-Cr-Al Alloy

    NASA Astrophysics Data System (ADS)

    Zhou, Zheng-Cun; Cheng, He-Fa; Gong, Chen-Li; Wei, Jian-Ning; Han, Fu-Sheng

    2002-11-01

    We have studied the temperature spectra of internal friction and relative dynamic modulus of the Fe-(25 wt%)Cr-(5 wt%)Al alloy with different grain sizes. It is found that a peak appears in the internal friction versus temperature plot at about 550°C. The peak is of a stable relaxation and is reversible, which occurs not only during heating but also during cooling. Its activation energy is 2.5 (+/- 0.15) eV in terms of the Arrhenius relation. In addition, the peak is not obvious in specimens with a smaller grain size. It is suggested that the peak originates from Zener relaxation.

  14. Improved Peak Cancellation for PAPR Reduction in OFDM Systems

    NASA Astrophysics Data System (ADS)

    Dan, Lilin; Xiao, Yue; Ni, Wei; Li, Shaoqian

    This letter presents an improved peak cancellation (PC) scheme for peak-to-average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM) systems. The main idea is based on a serial peak cancellation (SPC) mode for alleviating the peak regrowth of the conventional schemes. Based on the SPC mode, two particular algorithms are developed with different tradeoff between PAPR and computational complexity. Simulation shows that the proposed scheme has a better tradeoff among PAPR, complexity and signal distortion than the conventional schemes.

  15. Neutron-induced peaks in Ge detectors from evaporation neutrons

    NASA Astrophysics Data System (ADS)

    Gete, E.; Measday, D. F.; Moftah, B. A.; Saliba, M. A.; Stocki, T. J.

    1997-02-01

    We have studied the peak shapes at 596 and 691 keV resulting from fast neutron interactions inside germanium detectors. We have used neutrons from a 252Cf source, as well as from the 28Si(μ -, nv), and 209Bi(π -, xn) reactions to compare the peaks and to check for a dependence of peak shape on the incoming neutron energy. In our investigation, no difference between these three measurements has been observed. In a comparison of these peak shapes with other studies, we found similar results to ours except for those measurements using monoenergetic neutrons in which a significant variation with neutron energy has been observed.

  16. Peak Doctor v 1.0.0 Labview Version

    SciTech Connect

    Garner, Scott

    2014-05-29

    PeakDoctor software works interactively with its user to analyze raw gamma-ray spectroscopic data. The goal of the software is to produce a list of energies and areas of all of the peaks in the spectrum, as accurately as possible. It starts by performing an energy calibration, creating a function that describes how energy can be related to channel number. Next, the software determines which channels in the raw histogram are in the Compton continuum and which channels are parts of a peak. Then the software fits the Compton continuum with cubic polynomials. The last step is to fit all of the peaks with Gaussian functions, thus producing the list.

  17. Darwinische Kulturtheorie - Evolutionistische und "evolutionistische`` Theorien sozialen Wandels

    NASA Astrophysics Data System (ADS)

    Antweiler, Christoph

    Evolutionistische Argumentationen außerhalb der Biologie sind weit verbreitet. Wenn sie vertreten werden, heißt das mitnichten, dass sie notwendigerweise von darwinischen Argumenten geprägt sind. Wenn man Evolution und Kultur aus explizit darwinischer Perspektive zusammen bringt, bedeutet das noch lange nicht unbedingt Soziobiologie. Und es bedeutet sicherlich nicht Sozialdarwinismus. Dieser Beitrag soll einen Überblick der so genannten evolutionären Ansätze bzw. evolutionistischen Ansätze zu menschlichen Gesellschaften bzw. Kulturen geben. Es soll gezeigt werden, was in den Ansätzen analytisch zu trennen ist und was synthetisch zusammen gehört. Mein Beitrag ist nicht wissenschaftsgeschichtlich angelegt, sondern systematisch ausgerichtet und hat zwei Schwerpunkte (Antweiler 2008; Antweiler 2009b). Zum einen geht es um kausale Zusammenhänge von organischer Evolution und gesellschaftlichem Wandel. Auf der anderen Seite werden Analogien zwischen biotischer und kultureller Evolution erläutert, die als spezifische Ähnlichkeiten dieser beiden als grundsätzlich verschieden gesehenen Prozesse aufgefasst werden. Dadurch wird die Frage aufgeworfen, ob die Evolution von Organismen einerseits und die Transformation von Gesellschaften bzw. Kulturen andererseits, spezielle Fälle eines allgemeinen Modells von Evolution darstellen.

  18. Expertise bewerben und finden im Social Semantic Web

    NASA Astrophysics Data System (ADS)

    Polleres, Axel; Mochol, Malgorzata

    Im vorliegenden Beitrag diskutieren wir Rahmenbedingungen zur Kombination, Wiederverwendung und Erweiterung bestehender RDFVokabulare im Social Semantic Web. Hierbei konzentrieren wir uns auf das Anwendungsszenario des Auffindens und Bewerbens von Experten im Web oder Intranet. Wir präsentieren, wie RDF-Vokabulare einerseits und de facto Standardformate andererseits, die von täglich verwendeten Applikationen benutzt werden (z. B. vCard, iCal oder Dublin Core), kombiniert werden können, um konkrete Anwendungsfälle der Expertensuche und zum Management von Expertise zu lösen. Unser Fokus liegt darauf aufzuzeigen, dass für praktische Anwendungsszenarien nicht notwendigerweise neue Ontologien entwickelt werden müssen, sondern der Schlüssel vielmehr in der Integration von bestehenden, weit verbreiteten und sich ergänzenden Formaten zu einem kohärenten Netzwerk von Ontologien liegt. Dieser Ansatz garantiert sowohl direkte Anwendbarkeit von als auch niedrige Einstiegsbarrieren in Semantic Web-Technologien sowie einfache Integrierbarkeit in bestehende Applikationen. Die im Web verfügbaren und verwendeten RDFFormate decken zwar einen großen Bereich der Aspekte zur Beschreibung von Personen und Expertisen ab, zeigen aber auch signifikante Überlappungen. Bisher gibt es wenig systematische Ansätze, um diese Vokabulare zu verbinden, sei es in Form von allgemeingültigen Praktiken, die definieren, wann welches Format zu benutzen ist, oder in Form von Regeln, die Überlappungen zwischen einzelnen Formaten formalisieren. Der vorliegende Artikel analysiert, wie bestehende Formate zur Beschreibung von Personen, Organisationen und deren Expertise kombiniert und, wo nötig, erweitert werden können. Darüber hinaus diskutieren wir Regelsprachen zur Beschreibung von Formatüberlappungen sowie deren praktische Verwendbarkeit zur Erstellung eines Ontologie-Netzwerks zur Beschreibung von Experten.

  19. Peak flowmeter resistance decreases peak expiratory flow in subjects with COPD.

    PubMed

    Miller, M R; Pedersen, O F

    2000-07-01

    Previous studies have shown that the added resistance of a mini-Wright peak expiratory flow (PEF) meter reduced PEF by approximately 8% in normal subjects because of gas compression reducing thoracic gas volume at PEF and thus driving elastic recoil pressure. We undertook a body plethysmographic study in 15 patients with chronic obstructive pulmonary disease (COPD), age 65.9 +/- 6.3 yr (mean +/- SD, range 53-75 yr), to examine whether their recorded PEF was also limited by the added resistance of a PEF meter. The PEF meter increased alveolar pressure at PEF (Ppeak) from 3.7 +/- 1.4 to 4.7 +/- 1.5 kPa (P = 0.01), and PEF was reduced from 3.6 +/- 1.3 l/s to 3.2 +/- 0.9 l/s (P = 0.01). The influence of flow limitation on PEF and Ppeak was evaluated by a simple four-parameter model based on the wave-speed concept. We conclude that added external resistance in patients with COPD reduced PEF by the same mechanisms as in healthy subjects. Furthermore, the much lower Ppeak in COPD patients is a consequence of more severe flow limitation than in healthy subjects and not of deficient muscle strength. PMID:10904063

  20. WEAK-LENSING PEAK FINDING: ESTIMATORS, FILTERS, AND BIASES

    SciTech Connect

    Schmidt, Fabian

    2011-07-10

    Large catalogs of shear-selected peaks have recently become a reality. In order to properly interpret the abundance and properties of these peaks, it is necessary to take into account the effects of the clustering of source galaxies, among themselves and with the lens. In addition, the preferred selection of magnified galaxies in a flux- and size-limited sample leads to fluctuations in the apparent source density that correlate with the lensing field. In this paper, we investigate these issues for two different choices of shear estimators that are commonly in use today: globally normalized and locally normalized estimators. While in principle equivalent, in practice these estimators respond differently to systematic effects such as magnification and cluster member dilution. Furthermore, we find that the answer to the question of which estimator is statistically superior depends on the specific shape of the filter employed for peak finding; suboptimal choices of the estimator+filter combination can result in a suppression of the number of high peaks by orders of magnitude. Magnification and size bias generally act to increase the signal-to-noise {nu} of shear peaks; for high peaks the boost can be as large as {Delta}{nu} {approx} 1-2. Due to the steepness of the peak abundance function, these boosts can result in a significant increase in the observed abundance of shear peaks. A companion paper investigates these same issues within the context of stacked weak-lensing mass estimates.

  1. Greatest Moments in Interpersonal Communication: Peak Communication Experiencing.

    ERIC Educational Resources Information Center

    Gordon, Ron

    In an exploratory study of peak communication experiences (PCEs), 36 male and 50 female undergraduates from a speech communication course were asked to describe their PCEs using 19 descriptors derived from A. Maslow's model of the generalized peak experience. Two-thirds or more of both sexes used 10 of these 19 descriptors to characterize their…

  2. Peak Alert Time and Rapport between Residence Hall Roommates.

    ERIC Educational Resources Information Center

    Carey, John C.; And Others

    1988-01-01

    Examined whether peak alert time is related to compatibility for college roommates. Data from 66 male pairs and from 55 female pairs of roommates revealed that pairs who were similar on self-reported peak circadian alertness had higher levels of rapport. (Author/NB)

  3. 27 CFR 9.220 - Pine Mountain-Cloverdale Peak.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...—California, 1960, photoinspected 1975; and (3) Highland Springs Quadrangle—California, 1959, photorevised... straight line, crossing onto the Asti map, to the unnamed 2,769-foot peak located south of Salty Spring... Highland Springs map, to the unnamed 2,792-foot peak in the northeast quadrant of section 21, T12N,...

  4. 46. Peaks of Otter. View of the Johnson Farm, one ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. Peaks of Otter. View of the Johnson Farm, one of two historic structures left at peak of otter. The farm's interpretation focuses on the 1930's. Looking southeast. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

  5. 42. Peaks of Otter, Abbott Lake. View across lake to ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. Peaks of Otter, Abbott Lake. View across lake to peaks of Outter Lodge, completed in 1964. Construction of the lake got underway in 1964. Looking east-northeast. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

  6. PAVIS: a tool for Peak Annotation and Visualization.

    PubMed

    Huang, Weichun; Loganantharaj, Rasiah; Schroeder, Bryce; Fargo, David; Li, Leping

    2013-12-01

    We introduce a web-based tool, Peak Annotation and Visualization (PAVIS), for annotating and visualizing ChIP-seq peak data. PAVIS is designed with non-bioinformaticians in mind and presents a straightforward user interface to facilitate biological interpretation of ChIP-seq peak or other genomic enrichment data. PAVIS, through association with annotation, provides relevant genomic context for each peak, such as peak location relative to genomic features including transcription start site, intron, exon or 5'/3'-untranslated region. PAVIS reports the relative enrichment P-values of peaks in these functionally distinct categories, and provides a summary plot of the relative proportion of peaks in each category. PAVIS, unlike many other resources, provides a peak-oriented annotation and visualization system, allowing dynamic visualization of tens to hundreds of loci from one or more ChIP-seq experiments, simultaneously. PAVIS enables rapid, and easy examination and cross-comparison of the genomic context and potential functions of the underlying genomic elements, thus supporting downstream hypothesis generation. PMID:24008416

  7. 46 CFR 171.090 - Aft peak bulkhead.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Aft peak bulkhead. 171.090 Section 171.090 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SUBDIVISION AND STABILITY SPECIAL RULES PERTAINING TO VESSELS CARRYING PASSENGERS Additional Subdivision Requirements § 171.090 Aft peak bulkhead. (a) Each of the following vessels must have an...

  8. Psychological Preparation for Peak Performance in Sports Competition

    ERIC Educational Resources Information Center

    Ohuruogu, Ben; Jonathan, Ugwuanyi I.; Ikechukwu, Ugwu Jude

    2016-01-01

    This paper attempts to make an overview of various techniques, sport psychologist adopt in psychological preparation of athletes for peak performance. To attain peak performance in sports competitions, coaches and athletes should not base their prospect on physical training on sport skills alone rather should integrate both the mental and physical…

  9. A rise in peak performance age in female athletes.

    PubMed

    Elmenshawy, Ahmed R; Machin, Daniel R; Tanaka, Hirofumi

    2015-06-01

    It was reported in 1980s that ages at which peak performance was observed had remained remarkably stable in the past century, although absolute levels of athletic performance increased dramatically for the same time span. The emergence of older (masters) athletes in the past few decades has changed the demographics and age-spectrum of Olympic athletes. The primary aim of the present study was to determine whether the ages at which peak performance was observed had increased in the recent decades. The data spanning 114 years from the first Olympics (1898) to the most recent Olympics (2014) were collected using the publically available data. In the present study, ages at which Olympic medals (gold, silver, and bronze) were won were used as the indicators of peak performance age. Track and field, swimming, rowing, and ice skating events were analyzed. In men, peak performance age did not change significantly in most of the sporting events (except in 100 m sprint running). In contrast, peak performance ages in women have increased significantly since 1980s and consistently in all the athletic events examined. Interestingly, as women's peak performance age increased, they became similar to men's peak ages in many events. In the last 20-30 years, ages at which peak athletic performance is observed have increased in women but not in men. PMID:26022534

  10. Diagnose und Therapie einer Depression im höheren Lebensalter – Einflüsse von Patienten- und Arztmerkmalen

    PubMed Central

    von dem Knesebeck, Olaf; Bönte, Markus; Siegrist, Johannes; Marceau, Lisa; Link, Carol; McKinlay, John

    2013-01-01

    Zusammenfassung Studienergebnissee aus dem englischsprachigen Raum zeigen, dass diagnostische und therapeutische Entscheidungen von Hausärzten bei der Versorgung von depressiven Patienten systematischen Einflüssen unterliegen, und dass sowohl Merkmale des Arztes als auch des Patienten unabhängig vom Krankheitsbild Einfluss auf diese Entscheidungen haben. In der vorliegenden Arbeit werden Ergebnisse einer deutschen Studie präsentiert, in der die Einflüsse von Patienten- und Arztmerkmalen auf diagnostische und therapeutische ärztliche Entscheidungen bei einer Depression untersucht wurden. Unter Anwendung eines faktoriellen Experimentaldesigns spielten professionelle Schauspieler in Videofilmen die Rolle von Patienten, die Symptome für eine depressive Erkrankung äußern. In den Videofilmen, die alle auf einem identischen Skript basieren, wurden systematisch die Patientenmerkmale Alter (55 vs. 75 Jahre), Geschlecht und sozialer Status (Hausmeister vs. Lehrer) variiert. Die randomisierte Ärztestichprobe wurde nach dem Arztgeschlecht und professioneller Erfahrung (< 5 vs. > 15 Jahre) geschichtet. Der Videofilm wurde insgesamt 128 niedergelassenen Ärzten für Allgemeinmedizin und hausärztlich tätigen Internisten in ihrer Praxis vorgespielt. Danach wurden die Ärzte zu unterschiedlichen Aspekten von Diagnose und Therapie befragt. Es wurde erhoben, ob der Arzt dem Patienten über das gezeigte Gespräch hinausgehende Fragen stellen würde, welche Diagnosen er für wahrscheinlich hält, wie sicher er sich mit seiner Diagnose ist, welche diagnostischen Tests er anordnen würde, ob er den Patienten überweisen würde oder ob er Medikamente verordnen oder ihm Empfehlungen zur Änderung seines Lebensstils geben würde. Die Ergebnisse weisen darauf hin, dass sowohl die Diagnose als auch die Therapie einer Depression durch niedergelassene Hausärzte in Deutschland nur geringfügig durch die untersuchten Merkmale der Patienten und der behandelnden Ärzte beeinflusst wird

  11. Evaluation of different time domain peak models using extreme learning machine-based peak detection for EEG signal.

    PubMed

    Adam, Asrul; Ibrahim, Zuwairie; Mokhtar, Norrima; Shapiai, Mohd Ibrahim; Cumming, Paul; Mubin, Marizan

    2016-01-01

    Various peak models have been introduced to detect and analyze peaks in the time domain analysis of electroencephalogram (EEG) signals. In general, peak model in the time domain analysis consists of a set of signal parameters, such as amplitude, width, and slope. Models including those proposed by Dumpala, Acir, Liu, and Dingle are routinely used to detect peaks in EEG signals acquired in clinical studies of epilepsy or eye blink. The optimal peak model is the most reliable peak detection performance in a particular application. A fair measure of performance of different models requires a common and unbiased platform. In this study, we evaluate the performance of the four different peak models using the extreme learning machine (ELM)-based peak detection algorithm. We found that the Dingle model gave the best performance, with 72 % accuracy in the analysis of real EEG data. Statistical analysis conferred that the Dingle model afforded significantly better mean testing accuracy than did the Acir and Liu models, which were in the range 37-52 %. Meanwhile, the Dingle model has no significant difference compared to Dumpala model. PMID:27462484

  12. Methodik und Qualität statistischer Erhebungen

    NASA Astrophysics Data System (ADS)

    Krug, Walter; Schmidt, Jürgen; Wiegert, Rolf

    Kapitel 8 wirft einen Blick hinter die Kulissen statistischer Arbeit und ihrer Methoden, insbesondere auch hinter die der amtlichen Statistik: Wie kommen die Myriaden von Zahlen zustande, die heute aus statistischen Quellenwerken aller Art und aus Datenbanken abgerufen werden können? Dabei wird deutlich, welche Schwierigkeiten bei Erhebungen, insbesondere bei Stichprobenerhebungen, zu überwinden sind, wie man Antwortverweigerer kooperativer stimmt, wie sich auch aus kleinen Stichproben auf intelligente Weise verlässliche Ergebnisse erzielen lassen und wie Großstichproben auf europäischer Ebene harmonisiert werden. Am Beispiel des Zensus 2011 wird gezeigt, wie sich eine Kombination von Stichproben und Registerauswertungen als Ersatz für eine Volkszählung nutzen lässt. Mitglieder der Deutschen Statistischen Gesellschaft waren daran kooperativ beteiligt.

  13. The Women of "Kabale und Liebe": A Teaching Approach

    ERIC Educational Resources Information Center

    Stephan, Naomi I.

    1976-01-01

    The three female characters in Schiller's "Kabale und Liebe" are analyzed. The article questions the value of using this play in a college curriculum because of the oppressive and unenlightened roles of the female characters. (TL)

  14. Einstein. Ein Genie und sein überfordertes Publikum.

    NASA Astrophysics Data System (ADS)

    Fischer, E. P.

    Dieses Buch ist keine herkömmliche Biographie von Albert Einstein - vielmehr untersucht der Autor anhand charakteristischer Stationen in Einsteins Leben, dessen Denken und die Reaktionen seiner Zeitgenossen.

  15. Reduction in peak oxygen uptake after prolonged bed rest

    NASA Technical Reports Server (NTRS)

    Greenleaf, J. E.; Kozlowski, S.

    1982-01-01

    The hypothesis that the magnitude of the reduction in peak oxygen uptake (VO2) after bed rest is directly proportional to the level of pre-bed rest peak VO2 is tested. Complete pre and post-bed rest working capacity and body weight data were obtained from studies involving 24 men (19-24 years old) and 8 women (23-34 years old) who underwent bed rest for 14-20 days with no remedial treatments. Results of regression analyses of the present change in post-bed rest peak VO2 on pre-bed rest peak VO2 with 32 subjects show correlation coefficients of -0.03 (NS) for data expressed in 1/min and -0.17 for data expressed in ml/min-kg. In addition, significant correlations are found that support the hypothesis only when peak VO2 data are analyzed separately from studies that utilized the cycle ergometer, particularly with subjects in the supine position, as opposed to data obtained from treadmill peak VO2 tests. It is concluded that orthostatic factors, associated with the upright body position and relatively high levels of physical fitness from endurance training, appear to increase the variability of pre and particularly post-bed rest peak VO2 data, which would lead to rejection of the hypothesis.

  16. Two density peaks in low magnetic field helicon plasma

    SciTech Connect

    Wang, Y.; Zhao, G.; Ouyang, J. T. E-mail: lppmchenqiang@hotmail.com; Liu, Z. W.; Chen, Q. E-mail: lppmchenqiang@hotmail.com

    2015-09-15

    In this paper, we report two density peaks in argon helicon plasma under an axial magnetic field from 0 G to 250 G with Boswell-type antenna driven by radio frequency (RF) power of 13.56 MHz. The first peak locates at 40–55 G and the second one at 110–165 G, as the RF power is sustainably increased from 100 W to 250 W at Ar pressure of 0.35 Pa. The absorbed power of two peaks shows a linear relationship with the magnetic field. End views of the discharge taken by intensified charge coupled device reveal that, when the first peak appeared, the discharge luminance moves to the edge of the tube as the magnetic field increases. For the second peak, the strong discharge area is centered at the two antenna legs after the magnetic field reaches a threshold value. Comparing with the simulation, we suggest that the efficient power absorption of two peaks at which the efficient power absorption mainly appears in the near-antenna region is due to the mode conversion in bounded non-uniform helicon plasma. The two low-field peaks are caused, to some extent, by the excitation of Trivelpiece-Gould wave through non-resonance conversion.

  17. A simple pharmacokinetics subroutine for modeling double peak phenomenon.

    PubMed

    Mirfazaelian, Ahmad; Mahmoudian, Massoud

    2006-04-01

    Double peak absorption has been described with several orally administered drugs. Numerous reasons have been implicated in causing the double peak. DRUG-KNT--a pharmacokinetic software developed previously for fitting one and two compartment kinetics using the iterative curve stripping method--was modified and a revised subroutine was incorporated to solve double-peak models. This subroutine considers the double peak as two hypothetical doses administered with a time gap. The fitting capability of the presented model was verified using four sets of data showing double peak profiles extracted from the literature (piroxicam, ranitidine, phenazopyridine and talinolol). Visual inspection and statistical diagnostics showed that the present algorithm provided adequate curve fit disregarding the mechanism involved in the emergence of the secondary peaks. Statistical diagnostic parameters (RSS, AIC and R2) generally showed good fitness in the plasma profile prediction by this model. It was concluded that the algorithm presented herein provides adequate predicted curves in cases of the double peak phenomenon. PMID:16400712

  18. Einstellung und Wissen von Lehramtsstudierenden zur Evolution - ein Vergleich zwischen Deutschland und der Türkei

    NASA Astrophysics Data System (ADS)

    Graf, Dittmar; Soran, Haluk

    Es wird eine Untersuchung vorgestellt, in der Wissen und Überzeugungen von Lehramtsstudierenden aller Fächer zum Thema Evolution an zwei Universitäten in Deutschland und der Türkei erhoben worden sind. Die Befragung wurde in Dortmund und in Ankara durchgeführt. Es stellte sich heraus, dass ausgeprägte Defizite im Verständnis der Evolutionsmechanismen herrschen. Viele Studierende, insbesondere aus der Türkei, sind nicht von der Faktizität der Evolution überzeugt. Dies gilt sowohl für Studierende mit Fach Biologie als auch für Studierende mit anderen Fächern. Näher untersucht worden sind die Faktoren, die die Überzeugungen zur Evolution beeinflussen können, was ja in Anbetracht der hohen Ablehnungsrate der Evolution von besonderem Interesse ist. Das Vertrauen in die Wissenschaft spielt hierbei eine besondere Rolle: Wer der Wissenschaft vertraut, ist auch eher von der Evolution überzeugt, als diejenigen, die skeptisch gegenüber der Wissenschaft sind.

  19. Understanding Human Motion Skill with Peak Timing Synergy

    NASA Astrophysics Data System (ADS)

    Ueno, Ken; Furukawa, Koichi

    The careful observation of motion phenomena is important in understanding the skillful human motion. However, this is a difficult task due to the complexities in timing when dealing with the skilful control of anatomical structures. To investigate the dexterity of human motion, we decided to concentrate on timing with respect to motion, and we have proposed a method to extract the peak timing synergy from multivariate motion data. The peak timing synergy is defined as a frequent ordered graph with time stamps, which has nodes consisting of turning points in motion waveforms. A proposed algorithm, PRESTO automatically extracts the peak timing synergy. PRESTO comprises the following 3 processes: (1) detecting peak sequences with polygonal approximation; (2) generating peak-event sequences; and (3) finding frequent peak-event sequences using a sequential pattern mining method, generalized sequential patterns (GSP). Here, we measured right arm motion during the task of cello bowing and prepared a data set of the right shoulder and arm motion. We successfully extracted the peak timing synergy on cello bowing data set using the PRESTO algorithm, which consisted of common skills among cellists and personal skill differences. To evaluate the sequential pattern mining algorithm GSP in PRESTO, we compared the peak timing synergy by using GSP algorithm and the one by using filtering by reciprocal voting (FRV) algorithm as a non time-series method. We found that the support is 95 - 100% in GSP, while 83 - 96% in FRV and that the results by GSP are better than the one by FRV in the reproducibility of human motion. Therefore we show that sequential pattern mining approach is more effective to extract the peak timing synergy than non-time series analysis approach.

  20. Resonant Orbits and the High Velocity Peaks toward the Bulge

    NASA Astrophysics Data System (ADS)

    Molloy, Matthew; Smith, Martin C.; Evans, N. Wyn; Shen, Juntai

    2015-10-01

    We extract the resonant orbits from an N-body bar that is a good representation of the Milky Way, using the method recently introduced by Molloy et al. By decomposing the bar into its constituent orbit families, we show that they are intimately connected to the boxy-peanut shape of the density. We highlight the imprint due solely to resonant orbits on the kinematic landscape toward the Galactic center. The resonant orbits are shown to have distinct kinematic features and may be used to explain the cold velocity peak seen in the Apache Point Observatory Galactic Evolution Experiment commissioning data. We show that high velocity peaks are a natural consequence of the motions of stars in the 2:1 orbit family and that stars on other higher order resonances can contribute to the peaks. The locations of the peaks vary with bar angle and, with the tacit assumption that the observed peaks are due to the 2:1 family, we find that the locations of the high velocity peaks correspond to bar angles in the range {10}\\circ ≲ {θ }{bar}≲ 25^\\circ . However, some important questions about the nature of the peaks remain, such as their apparent absence in other surveys of the Bulge and the deviations from symmetry between equivalent fields in the north and south. We show that the absence of a peak in surveys at higher latitudes is likely due to the combination of a less prominent peak and a lower number density of bar supporting orbits at these latitudes.

  1. Physik gestern und heute Von der Metallstange zum Hochenergielaser

    NASA Astrophysics Data System (ADS)

    Heering, Peter

    2002-05-01

    Im Mai 1752 wurde in Marly bei Paris auf Anregung des amerikanischen Forschers und Politikers Benjamin Franklin erstmals die elektrische Natur des Blitzes nachgewiesen. Damals beschrieb Franklin auch eine technische Vorrichtung, die als Schutz von Gebäuden vor Blitzschlägen dienen sollte: den Blitzableiter. Diese aus heutiger Sicht scheinbar triviale Vorrichtung wurde aber keineswegs unmittelbar akzeptiert. Und bis heute ist die Forschung zum Schutz von Einrichtungen vor Blitzschlägen nicht abgeschlossen.

  2. Evolution: Treibende Kräfte in Natur und Kultur

    NASA Astrophysics Data System (ADS)

    Wuketits, Franz M.

    Vorbemerkung Der vorliegende Text ist sozusagen die Nachschrift meines im Dezember 2007 in Dresden gehaltenen Vortrags. Ich hielt den Vortrag im Wesentlichen in freier Rede, nur auf der Basis einiger Notizen, und schrieb den vollen Text danach. Dabei habe ich den Vortragsstil beibehalten. Allerdings habe ich nachträglich manches hinzugefügt, den Beitrag mit ein paar Anmerkungen versehen und einiges an zwischenzeitlich erschienener Literatur berücksichtigt.

  3. Peak Oil, Urban Form, and Public Health: Exploring the Connections

    PubMed Central

    Kaza, Nikhil; Knaap, Gerrit-Jan; Knaap, Isolde

    2011-01-01

    We assessed the relationships between peak oil and urban form, travel behavior, and public health. Peak oil will affect the general economy, travel behavior, and urban form through income and substitution effects; however, because of the wide range of substitution possibilities, the impacts are likely to be gradual and relatively small. Furthermore, we suggest that changes in travel behavior and increases in urban density will have both favorable and unfavorable effects on public health. To mitigate the adverse impacts and to maximize the positive effects of peak oil, we recommend that careful attention should be paid to urban design and public health responses for a range of urbanization patterns. PMID:21778494

  4. A model of peak production in oil fields

    NASA Astrophysics Data System (ADS)

    Abrams, Daniel M.; Wiener, Richard J.

    2010-01-01

    We developed a model for oil production on the basis of simple physical considerations. The model provides a basic understanding of Hubbert's empirical observation that the production rate for an oil-producing region reaches its maximum when approximately half the recoverable oil has been produced. According to the model, the oil production rate at a large field must peak before drilling peaks. We use the model to investigate the effects of several drilling strategies on oil production. Despite the model's simplicity, predictions for the timing and magnitude of peak production match data on oil production from major oil fields throughout the world.

  5. Determination of the total absorption peak in an electromagnetic calorimeter

    NASA Astrophysics Data System (ADS)

    Cheng, Jia-Hua; Wang, Zhe; Lebanowski, Logan; Lin, Guey-Lin; Chen, Shaomin

    2016-08-01

    A physically motivated function was developed to accurately determine the total absorption peak in an electromagnetic calorimeter and to overcome biases present in many commonly used methods. The function is the convolution of a detector resolution function with the sum of a delta function, which represents the complete absorption of energy, and a tail function, which describes the partial absorption of energy and depends on the detector materials and structures. Its performance was tested with the simulation of three typical cases. The accuracy of the extracted peak value, resolution, and peak area was improved by an order of magnitude on average, relative to the Crystal Ball function.

  6. Robust detection of peak signals for lateral flow immunoassays

    NASA Astrophysics Data System (ADS)

    Kim, Jongwon; Kim, Jong Dae; Nahm, Kie Bong; Choi, Eui Yul; Lee, Geumyoung

    2011-02-01

    Template matching method is presented to identify the peaks from the scanned signals of lateral flow immunoassay strips. The template is composed of two pulses separated by the distance of the control and the target ligand line in the assay, and is convolved with the scanned signal to deliver the maximum at the center of the two peaks. The peak regions were identified with the predefined distances from the center. Glycosylated haemoglobin immunoassay strips and fluorescent strip readers from Boditechmed Inc. were tested to estimate the lot and reader variations of the concentration measurands. The results showed the robustness of the propose method.

  7. Giant backscattering peak in angle-resolved Andreev reflection

    SciTech Connect

    Beenakker, C.W.J.; Melsen, J.A.; Brouwer, P.W.

    1995-05-15

    It is shown analytically and by numerical simulation that the angular distribution of Andreev reflection by a disordered normal-metal--superconductor junction has a narrow peak at the angle of incidence. The peak is higher than the well-known coherent backscattering peak in the normal state, by a large factor {ital G}/{ital G}{sub 0} (where {ital G} is the conductance of the junction and {ital G}{sub 0}=2{ital e}{sup 2}/{ital h}). The enhanced backscattering can be detected by means of ballistic point contacts.

  8. S1-Leitlinie zur UV-Phototherapie und Photochemotherapie.

    PubMed

    Herzinger, Thomas; Berneburg, Mark; Ghoreschi, Kamran; Gollnick, Harald; Hölzle, Erhard; Hönigsmann, Herbert; Lehmann, Percy; Peters, Thorsten; Röcken, Martin; Scharffetter-Kochanek, Karin; Schwarz, Thomas; Simon, Jan; Tanew, Adrian; Weichenthal, Michael

    2016-08-01

    Die heilsame Wirkung des Sonnenlichts war teilweise schon im Altertum bekannt und fand in der zweiten Hälfte des 19. Jahrhunderts wieder zunehmend Beachtung. Den Beginn der modernen Phototherapien markiert die Entwicklung einer Apparatur zur ultravioletten Bestrahlung der Hauttuberkulose durch Finnsen zu Beginn des zwanzigsten Jahrhunderts. Zur Therapie von Hauterkrankungen finden beinahe ausschließlich die spektralen Bereiche unterhalb des sichtbaren Lichtes (ultraviolett) Anwendung. Seit den 1970er Jahren stehen zunehmend leistungsfähige künstliche Strahlenquellen bereit für die Therapie mit UVB, UVA und die Kombination von UVA mit Photosensibilisatoren (Photochemotherapie). Hohe strukturelle und prozedurale Qualitätsstandards sind unabdingbare Voraussetzung für die Durchführung einer gleichermaßen wirkungsvollen wie auch sicheren Phototherapie. Die Leitlinie formuliert den aktuellen Konsens führender Experten auf dem Gebiet der Phototherapie in Bezug auf die Indikationen für die jeweiligen Therapieverfahren, deren Gegenanzeigen und Nebenwirkungen und insbesondere für die Wahl der korrekten Dosis zu Beginn und im Verlauf einer Therapie sowie das Management von Nebenwirkungen. PMID:27509439

  9. Zahlen und Rechenvorgänge auf unterschiedlichen Abstraktionsniveaus

    NASA Astrophysics Data System (ADS)

    Rödler, Klaus

    "Das Verständnis geht langsam vor sich!" Diesen wichtigen Satz hörte ich bei einem Vortrag von Martin Lowsky. Auf die hier behandelte Fragestellung übertragen heißt das: Was eine Zahl ist und wie ich sie im Rechenvorgang einsetzen und interpretieren kann, das erschließt sich erst allmählich. Die Zahl des Rechenanfängers ist nicht dieselbe wie die des kompetenten Rechners und es ist nicht die Zahl des Lehrers oder der Lehrerin. Die Zahlen sind nur auf der Oberfläche der Worte und Zeichen gleich. Im Innern, im Verständnis, sind sie völlig verschieden! Ich glaube, dass die Missachtung dieser Divergenz dazu führt, dass manche Kinder in für den Lehrer und Lehrerin nicht nachvollziehbaren Routinen stecken bleiben, einfachste Informationen nicht wirklich integrieren. Die auf beiden Seiten wachsende Verunsicherung durch die nicht erkannte und daher nicht kommunizierbare Diskrepanz im inneren Zahlkonzept stört den allmählichen Aufbau strukturierter Zahlvorstellungen.

  10. Anwendung von Methoden der Logistik und Netzplantechnik zur präzedenz- und ressourcenbeschränkten Ablaufplanung von Echtzeitsystemen

    NASA Astrophysics Data System (ADS)

    Gumzej, Roman; Lipičnik, Martin

    Grundlegende Zusammenhänge zwischen Logistik, Netzplantechnik und Echtzeit sowie den zugehörigen Arten der Ablaufplanung und ihrer Nutzung werden dargestellt. Das Echtzeitprinzip beinhaltet Rechtzeitigkeit von Abläufen, wobei es für eine frühzeitige Beendigung eines Ablaufs keinen Bonus gibt; im Gegensatz zum verspäteten Ablauf, dessen Konsequenzen in der Regel negativ und unabschätzbar sind. Das Just-in-Time-Prinzip gleicht dem der Echtzeit und wird vor allem in der Logistik zur Bezeichnung reibungsloser Abläufe in Beschaffungsketten verwendet. In der Netzplantechnik werden die kritischen Aktivitäten binnen eines Projektes bestimmt, die nicht verzögert werden dürfen, um das Projekt rechtzeitig zu beenden. Außerdem haben die drei Bereiche noch eine Gemeinsamkeit: um realistische Ablaufszenarien darzustellen, müssen in den Analysen auch begrenzte Ressourcen angemessen berücksichtigt werden.

  11. PolyaPeak: Detecting Transcription Factor Binding Sites from ChIP-seq Using Peak Shape Information

    PubMed Central

    Wu, Hao; Ji, Hongkai

    2014-01-01

    ChIP-seq is a powerful technology for detecting genomic regions where a protein of interest interacts with DNA. ChIP-seq data for mapping transcription factor binding sites (TFBSs) have a characteristic pattern: around each binding site, sequence reads aligned to the forward and reverse strands of the reference genome form two separate peaks shifted away from each other, and the true binding site is located in between these two peaks. While it has been shown previously that the accuracy and resolution of binding site detection can be improved by modeling the pattern, efficient methods are unavailable to fully utilize that information in TFBS detection procedure. We present PolyaPeak, a new method to improve TFBS detection by incorporating the peak shape information. PolyaPeak describes peak shapes using a flexible Pólya model. The shapes are automatically learnt from the data using Minorization-Maximization (MM) algorithm, then integrated with the read count information via a hierarchical model to distinguish true binding sites from background noises. Extensive real data analyses show that PolyaPeak is capable of robustly improving TFBS detection compared with existing methods. An R package is freely available. PMID:24608116

  12. Peak Doctor v 1.0.0 Labview Version

    Energy Science and Technology Software Center (ESTSC)

    2014-05-29

    PeakDoctor software works interactively with its user to analyze raw gamma-ray spectroscopic data. The goal of the software is to produce a list of energies and areas of all of the peaks in the spectrum, as accurately as possible. It starts by performing an energy calibration, creating a function that describes how energy can be related to channel number. Next, the software determines which channels in the raw histogram are in the Compton continuum andmore » which channels are parts of a peak. Then the software fits the Compton continuum with cubic polynomials. The last step is to fit all of the peaks with Gaussian functions, thus producing the list.« less

  13. Corona discharge ionization of paracetamol molecule: Peak assignment

    NASA Astrophysics Data System (ADS)

    Bahrami, H.; Farrokhpour, H.

    2015-01-01

    Ionization of paracetamol was investigated using ion mobility spectrometry equipped with a corona discharge ionization source. The measurements were performed in the positive ion mode and three peaks were observed in the ion mobility spectrum. Experimental evidence and theoretical calculations were used to correlate the peaks to related ionic species of paracetamol. Two peaks were attributed to protonated isomers of paracetamol and the other peak was attributed to paracetamol fragment ions formed by dissociation of the N-C bond after protonation of the nitrogen atom. It was observed that three sites of paracetamol compete for protonation and their relative intensities, depending on the sample concentration. The ratio of ion products could be predicted from the internal proton affinity of the protonation sites at each concentration.

  14. Corona discharge ionization of paracetamol molecule: peak assignment.

    PubMed

    Bahrami, H; Farrokhpour, H

    2015-01-25

    Ionization of paracetamol was investigated using ion mobility spectrometry equipped with a corona discharge ionization source. The measurements were performed in the positive ion mode and three peaks were observed in the ion mobility spectrum. Experimental evidence and theoretical calculations were used to correlate the peaks to related ionic species of paracetamol. Two peaks were attributed to protonated isomers of paracetamol and the other peak was attributed to paracetamol fragment ions formed by dissociation of the N-C bond after protonation of the nitrogen atom. It was observed that three sites of paracetamol compete for protonation and their relative intensities, depending on the sample concentration. The ratio of ion products could be predicted from the internal proton affinity of the protonation sites at each concentration. PMID:25128677

  15. Periodic transmission peak splitting in one dimensional disordered photonic structures

    NASA Astrophysics Data System (ADS)

    Kriegel, Ilka; Scotognella, Francesco

    2016-08-01

    In the present paper we present ways to modulate the periodic transmission peaks arising in disordered one dimensional photonic structures with hundreds of layers. Disordered structures in which the optical length nd (n is the refractive index and d the layer thickness) is the same for each layer show regular peaks in their transmission spectra. A proper variation of the optical length of the layers leads to a splitting of the transmission peaks. Notably, the variation of the occurrence of high and low refractive index layers, gives a tool to tune also the width of the peaks. These results are of highest interest for optical application, such as light filtering, where the manifold of parameters allows a precise design of the spectral transmission ranges.

  16. The Calculation of Adsorption Isotherms from Chromatographic Peak Shapes

    ERIC Educational Resources Information Center

    Neumann, M. G.

    1976-01-01

    Discusses the relationship between adsorption isotherms and elution peak shapes in gas chromatography, and describes a laboratory experiment which involves the adsorption of hexane, cyclohexane, and benzene on alumina at different temperatures. (MLH)

  17. Global flood hazard mapping using statistical peak flow estimates

    NASA Astrophysics Data System (ADS)

    Herold, C.; Mouton, F.

    2011-01-01

    Our aim is to produce a world map of flooded areas for a 100 year return period, using a method based on large rivers peak flow estimates derived from mean monthly discharge time-series. Therefore, the map is supposed to represent flooding that affects large river floodplains, but not events triggered by specific conditions like coastal or flash flooding for instance. We first generate for each basin a set of hydromorphometric, land cover and climatic variables. In case of an available discharge record station at the basin outlet, we base the hundred year peak flow estimate on the corresponding time-series. Peak flow magnitude for basin outlets without gauging stations is estimated by statistical means, performing several regressions on the basin variables. These peak flow estimates enable the computation of corresponding flooded areas using hydrologic GIS processing on digital elevation model.

  18. Potential of solar cooling systems for peak demand reduction

    SciTech Connect

    Pesaran, A A; Neymark, J

    1994-11-01

    We investigated the technical feasibility of solar cooling for peak demand reduction using a building energy simulation program (DOE2.1D). The system studied was an absorption cooling system with a thermal coefficient of performance of 0.8 driven by a solar collector system with an efficiency of 50% with no thermal storage. The analysis for three different climates showed that, on the day with peak cooling load, about 17% of the peak load could be met satisfactorily with the solar-assisted cooling system without any thermal storage. A performance availability analysis indicated that the solar cooling system should be designed for lower amounts of available solar resources that coincide with the hours during which peak demand reduction is required. The analysis indicated that in dry climates, direct-normal concentrating collectors work well for solar cooling; however, in humid climates, collectors that absorb diffuse radiation work better.

  19. Detail view of the decorative element at the peak of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail view of the decorative element at the peak of the gabled dormer of the northwest corner bay of the west façade - Oregon State Fairgrounds Grandstand, 2330 Seventeenth Avenue, Northeast, Salem, Marion, OR

  20. 48. VIEW OF SKYLINE DRIVE FROM THE ROCKY PEAK OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. VIEW OF SKYLINE DRIVE FROM THE ROCKY PEAK OF STONY MAN MOUNTAIN (EL. 4,011). LOOKING NORTHEAST. STONY MAN OVERLOOK VISIBLE IN THE DISTANCE. - Skyline Drive, From Front Royal, VA to Rockfish Gap, VA , Luray, Page County, VA

  1. Improvements to science operations at Kitt Peak National Observatory

    NASA Astrophysics Data System (ADS)

    Bohannan, Bruce

    1998-07-01

    In recent years Kitt Peak National Observatory has undertaken a number of innovative projects to optimize science operations with the suite of telescopes we operate on Kitt Peak, Arizona. Changing scientific requirements and expectations of our users, evolving technology and declining budgets have motivated the changes. The operations improvements have included telescope performance enhancements--with the focus on the Mayall 4-m--modes of observing and scheduling, telescope control and observing systems, planning and communication, and data archiving.

  2. Standard Test Data and Peak Fitting for XPS Measurements

    National Institute of Standards and Technology Data Gateway

    Standard Test Data and Peak Fitting for XPS Measurements (Web, free access)   This web site provides an extensive set of simulated photoelectron spectroscopy data for users to test software for determining the positions and intensities of overlapping peaks. Users download the data, perform their analyses, and then upload their results. A Java program evaluates the results and provides a graphical presentation of the errors in the user's analyses.

  3. Martian cratering and central peak statistics - Mariner 9 results

    NASA Technical Reports Server (NTRS)

    Cordell, B. M.; Lingenfelter, R. E.; Schubert, G.

    1974-01-01

    Mariner 9 imagery shows that central peaked craters occur much more frequently in the Martian south polar region than in typical equatorial areas, and that both regions have crater size frequency distributions characteristic of saturation. Several arguments indicate that a preferential production mechanism, e.g., pingo formation made possible by subsurface permafrost confined to Martian polar regions, may account for the central peak excess in the south polar region.

  4. Mass-concentration relation and weak lensing peak counts

    NASA Astrophysics Data System (ADS)

    Cardone, V. F.; Camera, S.; Sereno, M.; Covone, G.; Maoli, R.; Scaramella, R.

    2015-02-01

    Context. The statistics of peaks in weak lensing convergence maps is a promising tool for investigating both the properties of dark matter haloes and constraining the cosmological parameters. Aims: We study how the number of detectable peaks and its scaling with redshift depend upon the cluster's dark matter halo profiles and use peak statistics to constrain the parameters of the mass-concentration (MC) relation. We investigate which constraints the Euclid mission can set on the MC coefficients taking degeneracies with the cosmological parameters into account, too. Methods: To this end, we first estimated the number of peaks and its redshift distribution for different MC relations and found that the steeper the mass dependence and the greater the normalisation, the larger the number of detectable clusters, with the total number of peaks changing up to 40% depending on the MC relation. We then performed a Fisher matrix forecast of the errors on the MC relation parameters, as well as on cosmological parameters. Results: We find that peak number counts detected by Euclid can determine the normalization Av, the mass Bv, redshift Cv slopes, and intrinsic scatter σv of the MC relation to an unprecedented accuracy, which is σ(Av) /Av = 1%, σ(Bv) /Bv = 4%, σ(Cv) /Cv = 9%, and σ(σv) /σv = 1% if all cosmological parameters are assumed to be known. If we relax this severe assumption, constraints are degraded, but remarkably good results can be restored by setting only some of the parameters or combining peak counts with Planck data. This precision can give insight into competing scenarios of structure formation and evolution and into the role of baryons in cluster assembling. Alternatively, for a fixed MC relation, future peak counts can perform as well as current BAO and SNeIa when combined with Planck.

  5. Off-peak electric heat for broiler houses

    SciTech Connect

    Lomax, K.M.; Beston, T.A.; Collins, N.E.; McCarthy, G.S.

    1983-06-01

    An instrumented broiler house (5,000 bird capacity) was heated from September 1982 to February 1983 using off-peak electric energy. A storage/exchange tank containing water received heat energy from 10 PM to 6 AM and transferred heat to house air to maintain temperature. Cost of construction and operation are presented. Off-peak pricing was evaluated using our systems analysis model.

  6. Characterizing Earthquake Rupture Properties Using Peak High-Frequency Offset

    NASA Astrophysics Data System (ADS)

    Wen, L.; Meng, L.

    2014-12-01

    Teleseismic array back-projection (BP) of high frequency (~1Hz) seismic waves has been recently applied to image the aftershock sequence of the Tohoku-Oki earthquake. The BP method proves to be effective in capturing early aftershocks that are difficult to be detected due to the contamination of the mainshock coda wave. Furthermore, since the event detection is based on the identification of the local peaks in time series of the BP power, the resulting event location corresponds to the peak high-frequency energy rather than the hypocenter. In this work, we show that the comparison between the BP-determined catalog and conventional phase-picking catalog provides estimates of the spatial and temporal offset between the hypocenter and the peak high-frequency radiation. We propose to measure this peak high-frequency shift of global earthquakes between M4.0 to M7.0. We average the BP locations calibrated by multiple reference events to minimize the uncertainty due to the variation of 3D path effects. In our initial effort focusing on the foreshock and aftershock sequence of the 2014 Iquique earthquake, we find systematic shifts of the peak high-frequency energy towards the down-dip direction. We find that the amount of the shift is a good indication of rupture length, which scales with the earthquake magnitude. Further investigations of the peak high frequency offset may provide constraints on earthquake source properties such as rupture directivity, rupture duration, rupture speed, and stress drop.

  7. Non-Gaussian bias: insights from discrete density peaks

    SciTech Connect

    Desjacques, Vincent; Riotto, Antonio; Gong, Jinn-Ouk E-mail: jinn-ouk.gong@apctp.org

    2013-09-01

    Corrections induced by primordial non-Gaussianity to the linear halo bias can be computed from a peak-background split or the widespread local bias model. However, numerical simulations clearly support the prediction of the former, in which the non-Gaussian amplitude is proportional to the linear halo bias. To understand better the reasons behind the failure of standard Lagrangian local bias, in which the halo overdensity is a function of the local mass overdensity only, we explore the effect of a primordial bispectrum on the 2-point correlation of discrete density peaks. We show that the effective local bias expansion to peak clustering vastly simplifies the calculation. We generalize this approach to excursion set peaks and demonstrate that the resulting non-Gaussian amplitude, which is a weighted sum of quadratic bias factors, precisely agrees with the peak-background split expectation, which is a logarithmic derivative of the halo mass function with respect to the normalisation amplitude. We point out that statistics of thresholded regions can be computed using the same formalism. Our results suggest that halo clustering statistics can be modelled consistently (in the sense that the Gaussian and non-Gaussian bias factors agree with peak-background split expectations) from a Lagrangian bias relation only if the latter is specified as a set of constraints imposed on the linear density field. This is clearly not the case of standard Lagrangian local bias. Therefore, one is led to consider additional variables beyond the local mass overdensity.

  8. Peak suppression in ESEEM spectra of multinuclear spin systems.

    PubMed

    Stoll, Stefan; Calle, Carlos; Mitrikas, George; Schweiger, Arthur

    2005-11-01

    We have observed a disturbing suppression effect in three-pulse ESEEM and HYSCORE spectra of systems with more than one nucleus coupled to the electron spin. For such systems, the ESEEM signal contains internuclear combination peaks of varying intensity. At the same time, the peaks at the basic ESEEM frequencies are reduced in intensity, up to the point of complete cancellation. For both three-pulse ESEEM and HYSCORE, the amplitude of a peak of a given nucleus depends not only on its modulation depth parameter k and the tau-dependent blind-spot term b, but also on k and b of all other nuclei. Peaks of nuclei with shallow modulations can be strongly suppressed by nuclei with deep modulations. This cross-suppression effect explains the observation that HYSCORE (1)H peaks are often very weak or even undetectable in the presence of strong (14)N peaks. Due to this distortion of intensities, ESEEM spectra have to be analysed very carefully. We present a theoretical analysis of this effect based on the product rules, numerical computations, and illustrative experimental data on Cu(gly)(2). In experiments, the impact of this cross suppression can be alleviated by a proper choice of tau values, remote echo detection, and matched pulses. PMID:16112885

  9. Peaking of world oil production: Impacts, mitigation, & risk management

    SciTech Connect

    Hirsch, R.L.; Bezdek, Roger; Wendling, Robert

    2005-02-01

    The peaking of world oil production presents the U.S. and the world with an unprecedented risk management problem. As peaking is approached, liquid fuel prices and price volatility will increase dramatically, and, without timely mitigation, the economic, social, and political costs will be unprecedented. Viable mitigation options exist on both the supply and demand sides, but to have substantial impact, they must be initiated more than a decade in advance of peaking.... The purpose of this analysis was to identify the critical issues surrounding the occurrence and mitigation of world oil production peaking. We simplified many of the complexities in an effort to provide a transparent analysis. Nevertheless, our study is neither simple nor brief. We recognize that when oil prices escalate dramatically, there will be demand and economic impacts that will alter our simplified assumptions. Consideration of those feedbacks will be a daunting task but one that should be undertaken. Our aim in this study is to-- • Summarize the difficulties of oil production forecasting; • Identify the fundamentals that show why world oil production peaking is such a unique challenge; • Show why mitigation will take a decade or more of intense effort; • Examine the potential economic effects of oil peaking; • Describe what might be accomplished under three example mitigation scenarios. • Stimulate serious discussion of the problem, suggest more definitive studies, and engender interest in timely action to mitigate its impacts.

  10. VDI-Richtlinien - mit Technischen Regeln Wirtschaftlichkeit erhöhen und Standards setzen

    NASA Astrophysics Data System (ADS)

    Mandelartz, Johannes

    Der Verein Deutscher Ingenieure e.V. (VDI) ist ein gemeinnütziger, wirtschaftlich und politisch unabhängiger, technisch-wissenschaftlicher Verein von Ingenieuren und Naturwissenschaftlern. Mit über 137 000 persönlich zugeordneten Mitgliedern ist er eine der größten Ingenieur-Vereinigungen Europas und gilt in Deutschland als führender Sprecher der Technik und der Ingenieure. 1856 gegründet, hat er viele für die Technik wesentliche Entwicklungen in Gang gesetzt, so im Bereich der technischen Überwachung, der technischen Regelsetzung und Normung, der Arbeitsstudien, im gewerblichen Rechtsschutz und im Patentwesen. Seit seiner Gründung sieht es der VDI als seine Aufgabe, "das Zusammenwirken aller geistiger Kräfte der Technik im Bewusstsein ethischer Verantwortung zu fördern“ und die Lebensmöglichkeiten aller Menschen durch Entwicklung und sinnvoller Anwendung technischer Mittel zu verbessern.

  11. Regelungen im Verkehr mit Lebensmitteln und Bedarfsgegenständen in Deutschland

    NASA Astrophysics Data System (ADS)

    Thomas, Gundula; Freund, Astrid; Gründig, Friedrich

    Im Zuge der Globalisierung von Produktion und Handel ändert sich auch der Charakter der Vorschriften im Lebensmittelrecht. Zunehmend treten internationale Rechtsbestimmungen, Abkommen, Standards und andere Normen an die Stelle nationaler Regelungen.

  12. Measuring peak expiratory flow in general practice: comparison of mini Wright peak flow meter and turbine spirometer.

    PubMed Central

    Jones, K P; Mullee, M A

    1990-01-01

    OBJECTIVE--To compare measurements of the peak expiratory flow rate taken by the mini Wright peak flow meter and the turbine spirometer. DESIGN--Pragmatic study with randomised order of use of recording instruments. Phase 1 compared a peak expiratory flow type expiration recorded by the mini Wright peak flow meter with an expiration to forced vital capacity recorded by the turbine spirometer. Phase 2 compared peak expiratory flow type expirations recorded by both meters. Reproducibility was assessed separately. SETTING--Routine surgeries at Aldermoor Health Centre, Southampton. SUBJECTS--212 Patients aged 4 to 78 presenting with asthma or obstructive airways disease. Each patient contributed only once to each phase (105 in phase 1, 107 in phase 2), but some entered both phases on separate occasions. Reproducibility was tested on a further 31 patients. MAIN OUTCOME MEASURE--95% Limits of agreement between measurements on the two meters. RESULTS--208 (98%) Of the readings taken by the mini Wright meter were higher than the corresponding readings taken by the turbine spirometer, but the 95% limits of agreement (mean difference (2 SD] were wide (1 to 173 l/min). Differences due to errors in reproducibility were not sufficient to predict this level of disagreement. Analysis by age, sex, order of use, and the type of expiration did not detect any significant differences. CONCLUSIONS--The two methods of measuring peak expiratory flow rate were not comparable. The mini Wright meter is likely to remain the preferred instrument in general practice. PMID:2142611

  13. Nicolaus Copernicus Gesamtausgabe. Band VI/1. Documenta Copernicana: Briefe (Texte und Übersetzungen).

    NASA Astrophysics Data System (ADS)

    Kühne, A.

    Im Auftrage der Kommission für die Copernicus-Gesamtausgabe, herausgegeben von H. M. Nobis und M. Folkerts. Band VI/1 wurde bearbeitet von A. Kühne unter Mitarbeit von F. Boockmann und S. Kirschner und Verwendung der Vorarbeiten von H. M. Nobis.

  14. Ferrofluide - ihre Grundlagen und Anwendungen: Magnetische Flüssigkeiten kontrollieren

    NASA Astrophysics Data System (ADS)

    Odenbach, Stefan

    Strömung und Eigenschaften von Suspensionen kleiner magnetischer Teilchen, so genannten Ferrofluiden, lassen sich durch laborübliche Magnetfelder wesentlich beeinflussen. Dies ergibt neue Möglichkeiten in der Grundlagenforschung und erlaubt die Entwicklung interessanter technischer Anwendungen. So werden Ferrofluide beispielsweise im Dämpfungs- und Dichtungsbereich, in jüngerer Zeit auch im biomedizinischen Bereich eingesetzt.

  15. Verification of 1921 peak discharge at Skagit River near Concrete, Washington, using 2003 peak-discharge data

    USGS Publications Warehouse

    Mastin, M.C.; Kresch, D.L.

    2005-01-01

    The 1921 peak discharge at Skagit River near Concrete, Washington (U.S. Geological Survey streamflow-gaging station 12194000), was verified using peak-discharge data from the flood of October 21, 2003, the largest flood since 1921. This peak discharge is critical to determining other high discharges at the gaging station and to reliably estimating the 100-year flood, the primary design flood being used in a current flood study of the Skagit River basin. The four largest annual peak discharges of record (1897, 1909, 1917, and 1921) were used to determine the 100-year flood discharge at Skagit River near Concrete. The peak discharge on December 13, 1921, was determined by James E. Stewart of the U.S. Geological Survey using a slope-area measurement and a contracted-opening measurement. An extended stage-discharge rating curve based on the 1921 peak discharge was used to determine the peak discharges of the three other large floods. Any inaccuracy in the 1921 peak discharge also would affect the accuracies of the three other largest peak discharges. The peak discharge of the 1921 flood was recalculated using the cross sections and high-water marks surveyed after the 1921 flood in conjunction with a new estimate of the channel roughness coefficient (n value) based on an n-verification analysis of the peak discharge of the October 21, 2003, flood. The n value used by Stewart for his slope-area measurement of the 1921 flood was 0.033, and the corresponding calculated peak discharge was 240,000 cubic feet per second (ft3/s). Determination of a single definitive water-surface profile for use in the n-verification analysis was precluded because of considerable variation in elevations of surveyed high-water marks from the flood on October 21, 2003. Therefore, n values were determined for two separate water-surface profiles thought to bracket a plausible range of water-surface slopes defined by high-water marks. The n value determined using the flattest plausible slope was 0

  16. Estimating peak oxygen uptake based on postexercise measurements in swimming.

    PubMed

    Chaverri, Diego; Iglesias, Xavier; Schuller, Thorsten; Hoffmann, Uwe; Rodríguez, Ferran A

    2016-06-01

    To assess the validity of postexercise measurements in estimating peak oxygen uptake (V̇O2peak) in swimming, we compared oxygen uptake (V̇O2) measurements during supramaximal exercise with various commonly adopted methods, including a recently developed heart rate - V̇O2 modelling procedure. Thirty-one elite swimmers performed a 200-m maximal swim where V̇O2 was measured breath-by-breath using a portable gas analyzer connected to a respiratory snorkel, 1 min before, during, and 3 min postexercise. V̇O2peak(-20-0) was the average of the last 20 s of effort. The following postexercise measures were compared: (i) first 20-s average (V̇O2peak(0-20)); (ii) linear backward extrapolation (BE) of the first 20 s (BE(20)), 30 s, and 3 × 20-, 4 × 20-, and 3 or 4 × 20-s averages; (iii) semilogarithmic BE at 20 s (LOG(20)) and at the other same time intervals as in linear BE; and (iv) predicted V̇O2peak using mathematical modelling (pV̇O2(0-20)]. Repeated-measures ANOVA and post-hoc Bonferroni tests compared V̇O2peak (criterion) and each estimated value. Pearson's coefficient of determination (r(2)) was used to assess correlation. Exercise V̇O2peak(-20-0) (mean ± SD 3531 ± 738 mL·min(-1)) was not different (p > 0.30) from pV̇O2(0-20) (3571 ± 735 mL·min(-1)), BE(20) (3617 ± 708 mL·min(-1)), or LOG(20) (3627 ± 746 mL·min(-1)). pV̇O2(0-20) was very strongly correlated with exercise V̇O2peak (r(2) = 0.962; p < 0.001), and showed a low standard error of the estimate (146 mL·min(-1), 4.1%) and the lowest mean difference (40 mL·min(-1); 1.1%). We confirm that the new modelling procedure based on postexercise V̇O2 and heart rate measurements is a valid and accurate procedure for estimating V̇O2peak in swimmers and avoids the estimation bias produced by other methods. PMID:27226382

  17. Errors in trough: peak ratio determinations induced by patient behaviour.

    PubMed

    Dutrey-Dupagne; Vaur; Genès; Mallion; Meredith; Elkik

    1996-06-01

    BACKGROUND: Trough: peak ratio is often used to evaluate the duration of antihypertensive action. Whatever the method of measurement chosen, trough effect has to be measured 24 h after the last drug intake for a once daily regimen. Peak effect is usually measured 4-6 h after drug intake. If patients' compliance to therapeutic instructions is perfect, then the 'intrinsic' trough: peak ratio of the drug is equal to the measured trough: peak ratio. Some patients do not follow these instructions, leading to biases in the evaluation of the ratio. For trough evaluation, all patients (N) are supposed to take the last dose of the drug the day before blood pressure measurement. However, if some patients (n1) wrongly take the drug in the morning of the visit, they will be evaluated at peak (type A error). For peak evaluation, all patients (N) are supposed to take the drug a few hours before blood pressure measurement. If some patients (n2) miss their morning dose, they will be evaluated at trough (type B error). METHODS: In the MACH 1 study, the use of an electronic pill count monitor allowed us to quantify n1/N and n2/N. A total of 452 hypertensive patients were randomly assigned to two groups. Patients in group 1 received written instructions to take their last dose during the morning of the day before the visit, whereas patients of group 2 had to take their last dose on the morning of the visit. RESULTS: Electronic pill-box recording revealed that 32.9%: of patients in group 1 committed type A error, whereas 27.7% of patients in group 2 committed type B error. The resulting 'pill-box corrected' trough: peak ratio was lower (87.5% for diastolic blood pressure and 93.1% for systolic blood pressure) than the uncorrected trough: peak ratio (95.2% for diastolic blood pressure and 96.0% for systolic blood pressure) of the population. CONCLUSION: The random behaviour of patients, with respect to treatment compliance, results in a systematic overestimation of the measured trough

  18. Wavelet Approach for Operational Gamma Spectral Peak Detection - Preliminary Assessment

    SciTech Connect

    ,

    2012-02-01

    Gamma spectroscopy for radionuclide identifications typically involves locating spectral peaks and matching the spectral peaks with known nuclides in the knowledge base or database. Wavelet analysis, due to its ability for fitting localized features, offers the potential for automatic detection of spectral peaks. Past studies of wavelet technologies for gamma spectra analysis essentially focused on direct fitting of raw gamma spectra. Although most of those studies demonstrated the potentials of peak detection using wavelets, they often failed to produce new benefits to operational adaptations for radiological surveys. This work presents a different approach with the operational objective being to detect only the nuclides that do not exist in the environment (anomalous nuclides). With this operational objective, the raw-count spectrum collected by a detector is first converted to a count-rate spectrum and is then followed by background subtraction prior to wavelet analysis. The experimental results suggest that this preprocess is independent of detector type and background radiation, and is capable of improving the peak detection rates using wavelets. This process broadens the doors for a practical adaptation of wavelet technologies for gamma spectral surveying devices.

  19. Variable threshold method for ECG R-peak detection.

    PubMed

    Kew, Hsein-Ping; Jeong, Do-Un

    2011-10-01

    In this paper, a wearable belt-type ECG electrode worn around the chest by measuring the real-time ECG is produced in order to minimize the inconvenient in wearing. ECG signal is detected using a potential instrument system. The measured ECG signal is transmits via an ultra low power consumption wireless data communications unit to personal computer using Zigbee-compatible wireless sensor node. ECG signals carry a lot of clinical information for a cardiologist especially the R-peak detection in ECG. R-peak detection generally uses the threshold value which is fixed. There will be errors in peak detection when the baseline changes due to motion artifacts and signal size changes. Preprocessing process which includes differentiation process and Hilbert transform is used as signal preprocessing algorithm. Thereafter, variable threshold method is used to detect the R-peak which is more accurate and efficient than fixed threshold value method. R-peak detection using MIT-BIH databases and Long Term Real-Time ECG is performed in this research in order to evaluate the performance analysis. PMID:21695499

  20. General theory of peak compression in liquid chromatography.

    PubMed

    Gritti, Fabrice

    2016-02-12

    A new and general expression of the peak compression factor in liquid chromatography is derived. It applies to any type of gradients induced by non-uniform columns (stationary) or by temporal variations (dynamic) of the elution strength related to changes in solvent composition, temperature, or in any external field. The new equation is validated in two ideal cases for which the exact solutions are already known. From a practical viewpoint, it is used to predict the achievable degree of peak compression for curved retention models, retained solvent gradients, and for temperature-programmed liquid chromatography. The results reveal that: (1) curved retention models affect little the compression factor with respect to the best linear strength retention models, (2) gradient peaks can be indefinitely compressed with respect to isocratic peaks if the propagation speed of the gradient (solvent or temperature) becomes smaller than the chromatographic velocity, (3) limitations are inherent to the maximum intensity of the experimental intrinsic gradient steepness, and (4) dynamic temperature gradients can be advantageously combined to solvent gradients in order to improve peak capacities of microfluidic separation devices. PMID:26805599

  1. Oceanic Lightning versus Continental Lightning: VLF Peak Current Discrepancies

    NASA Astrophysics Data System (ADS)

    Dupree, N. A., Jr.; Moore, R. C.

    2015-12-01

    Recent analysis of the Vaisala global lightning data set GLD360 suggests that oceanic lightning tends to exhibit larger peak currents than continental lightning (lightning occurring over land). The GLD360 peak current measurement is derived from distant measurements of the electromagnetic fields emanated during the lightning flash. Because the GLD360 peak current measurement is a derived quantity, it is not clear whether the actual peak currents of oceanic lightning tend to be larger, or whether the resulting electromagnetic field strengths tend to be larger. In this paper, we present simulations of VLF signal propagation in the Earth-ionosphere waveguide to demonstrate that the peak field values for oceanic lightning can be significantly stronger than for continental lightning. Modeling simulations are performed using the Long Wave Propagation Capability (LWPC) code to directly evaluate the effect of ground conductivity on VLF signal propagation in the 5-15 kHz band. LWPC is an inherently narrowband propagation code that has been modified to predict the broadband response of the Earth-Ionosphere waveguide to an impulsive lightning flash while preserving the ability of LWPC to account for an inhomogeneous waveguide. Furthermore, we evaluate the effect of return stroke speed on these results.

  2. Effects of equipment and technique on peak flow measurements

    PubMed Central

    Bongers, Thomas; O'Driscoll, B Ronan

    2006-01-01

    Background Different lung function equipment and different respiratory manoeuvres may produce different Peak Expiratory Flow (PEF) results. Although the PEF is the most common lung function test, there have been few studies of these effects and no previous study has evaluated both factors in a single group of patients. Methods We studied 36 subjects (PEF range 80–570 l/min). All patients recorded PEF measurements using a short rapid expiration following maximal inspiration (PEF technique) or a forced maximal expiration to residual volume (FVC technique). Measurements were made using a Wright's peak flow meter, a turbine spirometer and a Fleisch pneumotachograph spirometer. Results The mean PEF was 8.7% higher when the PEF technique was used (compared with FVC technique, p < 0.0001). The mean PEF recorded with the turbine spirometer was 5.5% lower than the Wright meter reading. The Fleisch spirometer result was 19.5% lower than the Wright reading. However, adjustment of the Wrights measurements from the traditional Wright's scale to the new EU Peak Flow scale produced results that were only 7.2% higher than the Fleisch pneumotachograph measurements. Conclusion Peak flow measurements are affected by the instruction given and by the device and Peak Flow scale used. Patient management decisions should not be based on PEF measurement made on different instruments. PMID:16787543

  3. Estimating peak discharges of small rural streams in Massachusetts

    USGS Publications Warehouse

    Wandle, S. William, Jr.

    1982-01-01

    Floodflows on natural-flow streams in Massachusetts with drainage areas between 0.25 square miles and 260 square miles may be estimated from drainage area, main-channel slope, mean basin elevation, and the area of swamps, lakes, and ponds. Multiple-regression techniques were used to define the relationship between a suite of basin and climatic characteristics and flood peaks in three flood-frequency regions at a total of 95 sites. Station flood-frequency data were computed following guidelines in Bulletin 17A of the U.S. Water Resources Council. The frequency analyses are based upon weighted skew values, and adjustments for high and low outliers, and historic peak data. The regression equations for peak discharges with 0.5, 0.2, 0.1, 0.04, 0.02, and 0.01 exceedance probabilities provide the best estimate of peak flow at ungaged sites. An improved sample of flood peaks and gaging stations and the definition of three flood-frequency regions reduced the standard error of estimate by about 5% over those for the 1977 relations. Included in this analysis were the synthetic flood-frequency data at eight sites computed using historic climatic data and 10 parameters optimized by calibration U.S. Geological Survey 's rainfall-runoff model with storm data observed over 11 years. (USGS)

  4. Analysis of the Magnitude and Frequency of Peak Discharge and Maximum Observed Peak Discharge in New Mexico and Surrounding Areas

    USGS Publications Warehouse

    Waltemeyer, Scott D.

    2008-01-01

    Estimates of the magnitude and frequency of peak discharges are necessary for the reliable design of bridges, culverts, and open-channel hydraulic analysis, and for flood-hazard mapping in New Mexico and surrounding areas. The U.S. Geological Survey, in cooperation with the New Mexico Department of Transportation, updated estimates of peak-discharge magnitude for gaging stations in the region and updated regional equations for estimation of peak discharge and frequency at ungaged sites. Equations were developed for estimating the magnitude of peak discharges for recurrence intervals of 2, 5, 10, 25, 50, 100, and 500 years at ungaged sites by use of data collected through 2004 for 293 gaging stations on unregulated streams that have 10 or more years of record. Peak discharges for selected recurrence intervals were determined at gaging stations by fitting observed data to a log-Pearson Type III distribution with adjustments for a low-discharge threshold and a zero skew coefficient. A low-discharge threshold was applied to frequency analysis of 140 of the 293 gaging stations. This application provides an improved fit of the log-Pearson Type III frequency distribution. Use of the low-discharge threshold generally eliminated the peak discharge by having a recurrence interval of less than 1.4 years in the probability-density function. Within each of the nine regions, logarithms of the maximum peak discharges for selected recurrence intervals were related to logarithms of basin and climatic characteristics by using stepwise ordinary least-squares regression techniques for exploratory data analysis. Generalized least-squares regression techniques, an improved regression procedure that accounts for time and spatial sampling errors, then were applied to the same data used in the ordinary least-squares regression analyses. The average standard error of prediction, which includes average sampling error and average standard error of regression, ranged from 38 to 93 percent

  5. Analysis of the magnitude and frequency of peak discharge and maximum observed peak discharge in New Mexico

    USGS Publications Warehouse

    Waltemeyer, S.D.

    1996-01-01

    Equations for estimating the magnitude of peak discharges for recurrence intervals of 2, 5, 10, 25, 50, 100, and 500 years were updated for New Mexico. The equations represent flood response for eight distinct physiographic regions of New Mexico. Additionally, a regional equation was developed for basins less than 10 square miles and below 7,500 feet in mean basin elevation. Flood-frequency relations were updated for 201 gaging stations on unregulated streams in New Mexico and the bordering areas of adjacent States. The analysis described in this report used data collected through 1993. A low-discharge threshold was applied to frequency analysis of 140 gaging stations. Inclusion of these low peak flows affects the fitting of the lower tail and the upper tail of the distribution. Peak discharges can be estimated at an ungaged site on a stream that has a gaging station upstream or downstream. These estimates are derived using the drainage-area ratio and the drainage-area exponent from the regional regression equation of the respective region. Flood-frequency estimates for 201 gaged sites were weighted by estimates from the regional regression equation. The observed, predicted, and weighted flood-frequency data were computed for each gaging station. A maximum observed peak discharge as related to drainage area was determined for eight physiographic regions in New Mexico. Peak-discharge data collected at 201 gaging stations were used to develop a maximum peak-discharge relation as an alternative method of estimating the peak discharge of an extreme event.

  6. Pre-Peak and Post-Peak Rock Strain Characteristics During Uniaxial Compression by 3D Digital Image Correlation

    NASA Astrophysics Data System (ADS)

    Munoz, H.; Taheri, A.; Chanda, E. K.

    2016-07-01

    A non-contact optical method for strain measurement applying three-dimensional digital image correlation (3D DIC) in uniaxial compression is presented. A series of monotonic uniaxial compression tests under quasi-static loading conditions on Hawkesbury sandstone specimens were conducted. A prescribed constant lateral-strain rate to control the applied axial load in a closed-loop system allowed capturing the complete stress-strain behaviour of the rock, i.e. the pre-peak and post-peak stress-strain regimes. 3D DIC uses two digital cameras to acquire images of the undeformed and deformed shape of an object to perform image analysis and provides deformation and motion measurements. Observations showed that 3D DIC provides strains free from bedding error in contrast to strains from LVDT. Erroneous measurements due to the compliance of the compressive machine are also eliminated. Furthermore, by 3D DIC technique relatively large strains developed in the post-peak regime, in particular within localised zones, difficult to capture by bonded strain gauges, can be measured in a straight forward manner. Field of strains and eventual strain localisation in the rock surface were analysed by 3D DIC method, coupled with the respective stress levels in the rock. Field strain development in the rock samples, both in axial and shear strain domains suggested that strain localisation takes place progressively and develops at a lower rate in pre-peak regime. It is accelerated, otherwise, in post-peak regime associated with the increasing rate of strength degradation. The results show that a major failure plane, due to strain localisation, becomes noticeable only long after the peak stress took place. In addition, post-peak stress-strain behaviour was observed to be either in a form of localised strain in a shearing zone or inelastic unloading outside of the shearing zone.

  7. Double-peak mechanical properties of carbon-nanotube fibers.

    PubMed

    Zhao, Jingna; Zhang, Xiaohua; Di, Jiangtao; Xu, Geng; Yang, Xiaojie; Liu, Xiangyang; Yong, Zhenzhong; Chen, Minghai; Li, Qingwen

    2010-11-22

    The introduction of twist during the spinning of carbon nanotubes from their arrays (forests) has been widely applied in making ultrastrong, stiff, and lightweight nanotube fibers. Here, for the first time, an important observation of a double-peak behavior of the tensile properties, as a function of the twist angle, that is different from the single peak of traditional fibers is reported. Raman spectra show that the new peak arises from the collapse of nanotubes, showing a strong "nano" element in applying the ancient draw-and-twist technique, besides the downsizing. A qualitative continuum model is also presented to describe the collapse-induced enhancement as well as traditional fibers. Our combined experimental and theoretical studies indicate the direction of full utilization of the nano element in improving the mechanical properties of nanotube fibers. PMID:20941775

  8. Bayesian Peptide Peak Detection for High Resolution TOF Mass Spectrometry

    PubMed Central

    Zhang, Jianqiu; Zhou, Xiaobo; Wang, Honghui; Suffredini, Anthony; Zhang, Lin; Huang, Yufei; Wong, Stephen

    2011-01-01

    In this paper, we address the issue of peptide ion peak detection for high resolution time-of-flight (TOF) mass spectrometry (MS) data. A novel Bayesian peptide ion peak detection method is proposed for TOF data with resolution of 10 000–15 000 full width at half-maximum (FWHW). MS spectra exhibit distinct characteristics at this resolution, which are captured in a novel parametric model. Based on the proposed parametric model, a Bayesian peak detection algorithm based on Markov chain Monte Carlo (MCMC) sampling is developed. The proposed algorithm is tested on both simulated and real datasets. The results show a significant improvement in detection performance over a commonly employed method. The results also agree with expert’s visual inspection. Moreover, better detection consistency is achieved across MS datasets from patients with identical pathological condition. PMID:21544266

  9. On the off-stoichiometric peaking of adiabatic flame temperature

    SciTech Connect

    Law, C.K.; Lu, T.F.; Makino, A.

    2006-06-15

    The characteristic rich shifting of the maximum adiabatic flame temperature from the stoichiometric value for mixtures of hydrocarbon and air is demonstrated to be caused by product dissociation and hence reduced amount of heat release. Since the extent of dissociation is greater on the lean side as a result of the stoichiometry of dissociated products, the peaking occurs on the rich side. The specific heat per unit mass of the mixture is shown to increase monotonically with increasing fuel concentration, and as such tends to shift the peak toward the lean side. It is further shown that this is the cause for the lean shifting of the adiabatic flame temperature of oxidizer-enriched mixtures of N{sub m}H{sub n} and F{sub 2} and of NH{sub 3} and O{sub 2}, with various amounts of inert dilution, even though their maximum heat release still peaks on the rich side. (author)

  10. Peak pool boiling heat flux in viscous liquids

    NASA Technical Reports Server (NTRS)

    Dhir, V. K.; Lienhard, J. H.

    1974-01-01

    The stability of a gas jet in a surrounding viscous liquid is studied. An expression is developed for the critical velocity at which the jet becomes unstable in a returning viscous liquid. The stability analysis is made to correspond with the geometrical configuration of gas jets and liquid columns similar to those observed near the peak pool boiling heat flux. The critical velocity of the gas jet is then used to obtain the functional form of the peak heat flux on flat plates and cylindrical heaters. The expressions are compared with original observations of the peak heat flux in very viscous liquids on flat plate, and cylindrical, heaters at both earth-normal, and elevated, gravities.

  11. Reevaluating Hubbert's Prediction of U.S. Peak Oil

    NASA Astrophysics Data System (ADS)

    van der Veen, C. J.

    2006-05-01

    In 1956, M. King Hubbert, chief consultant for the Shell Development Company's exploration and production research division, forecasted that U.S. oil production would peak in the early 1970s. He subsequently updated this prediction using newer data, but the predicted timing of peaking did not change significantly (see Hubbert [1982] for a review and references to earlier papers). In 1971, U.S. annual production of crude oil peaked at slightly more than three billion barrels (bbl). Yet, Hubbert's model continues to be challenged by some. For instance, according to economist Michael Lynch, president of Strategic Energy and Economic Research, Inc., Winchester, Mass., it was only after Hubbert published his predictions ``that the Hubbert curve came to be seen as explanatory in and of itself, that is, geology requires that production should follow such a curve'' [Lynch, 2003].

  12. Optical Peaking Enhancement in High-Speed Ring Modulators

    PubMed Central

    Müller, J.; Merget, F.; Azadeh, S. Sharif; Hauck, J.; García, S. Romero; Shen, B.; Witzens, J.

    2014-01-01

    Ring resonator modulators (RRM) combine extreme compactness, low power consumption and wavelength division multiplexing functionality, making them a frontrunner for addressing the scalability requirements of short distance optical links. To extend data rates beyond the classically assumed bandwidth capability, we derive and experimentally verify closed form equations of the electro-optic response and asymmetric side band generation resulting from inherent transient time dynamics and leverage these to significantly improve device performance. An equivalent circuit description with a commonly used peaking amplifier model allows straightforward assessment of the effect on existing communication system architectures. A small signal analytical expression of peaking in the electro-optic response of RRMs is derived and used to extend the electro-optic bandwidth of the device above 40 GHz as well as to open eye diagrams penalized by intersymbol interference at 32, 40 and 44 Gbps. Predicted peaking and asymmetric side band generation are in excellent agreement with experiments. PMID:25209255

  13. Peaks in the Cosmic Microwave Background: Flat versus Open Models

    NASA Astrophysics Data System (ADS)

    Barreiro, R. B.; Sanz, J. L.; Martínez-González, E.; Cayón, L.; Silk, Joseph

    1997-03-01

    We present properties of the peaks (maxima) of the microwave background anisotropies expected in flat and open cold dark matter models. We obtain analytical expressions of several topological descriptors: mean number of maxima and the probability distribution of the Gaussian curvature and the eccentricity of the peaks. These quantities are calculated as functions of the radiation power spectrum, assuming a Gaussian distribution of temperature anisotropies. We present results for angular resolutions ranging from 5' to 20' (antenna FWHM), scales that are relevant for the MAP and COBRAS/SAMBA space missions and the ground-based interferometer experiments. Our analysis also includes the effects of noise. We find that the number of peaks can discriminate between standard cold dark matter models and that the Gaussian curvature distribution provides a useful test for these various models, whereas the eccentricity distribution cannot distinguish between them.

  14. The peak electromagnetic power radiated by lightning return strokes

    NASA Technical Reports Server (NTRS)

    Krider, E. P.; Guo, C.

    1983-01-01

    Estimates of the peak electromagnetic (EM) power radiated by return strokes have been made by integrating the Poynting vector of measured fields over an imaginary hemispherical surface that is centered on the lightning source, assuming that ground losses are negligible. Values of the peak EM power from first and subsequent strokes have means and standard deviations of 2 + or - 2 x 10 to the 10th and 3 + or - 4 x 10 to the 9th W, respectively. The average EM power that is radiated by subsequent strokes, at the time of the field peak, is about 2 orders of magnitude larger than the optical power that is radiated by these strokes in the wavelength interval from 0.4 to 1.1 micron; hence an upper limit to the radiative efficiency of a subsequent stroke is of the order of 1 percent or less at this time.

  15. Multiple peaks of species abundance distributions induced by sparse interactions.

    PubMed

    Obuchi, Tomoyuki; Kabashima, Yoshiyuki; Tokita, Kei

    2016-08-01

    We investigate the replicator dynamics with "sparse" symmetric interactions which represent specialist-specialist interactions in ecological communities. By considering a large self-interaction u, we conduct a perturbative expansion which manifests that the nature of the interactions has a direct impact on the species abundance distribution. The central results are all species coexistence in a realistic range of the model parameters and that a certain discrete nature of the interactions induces multiple peaks in the species abundance distribution, providing the possibility of theoretically explaining multiple peaks observed in various field studies. To get more quantitative information, we also construct a non-perturbative theory which becomes exact on tree-like networks if all the species coexist, providing exact critical values of u below which extinct species emerge. Numerical simulations in various different situations are conducted and they clarify the robustness of the presented mechanism of all species coexistence and multiple peaks in the species abundance distributions. PMID:27627322

  16. Plasma spectrum peak extraction algorithm of laser film damage

    NASA Astrophysics Data System (ADS)

    Zhao, Dan; Su, Jun-hong; Xu, Jun-qi

    2012-10-01

    The plasma spectrometry is an emerging method to distinguish the thin-film laser damage. Laser irradiation film surface occurrence of flash, using the spectrometer receives the flash spectrum, extracting the spectral peak, and by means of the spectra of the thin-film materials and the atmosphere has determine the difference, as a standard to determine the film damage. Plasma spectrometry can eliminate the miscarriage of justice which caused by atmospheric flashes, and distinguish high accuracy. Plasma spectra extraction algorithm is the key technology of Plasma spectrometry. Firstly, data de noising and smoothing filter is introduced in this paper, and then during the peak is detecting, the data packet is proposed, and this method can increase the stability and accuracy of the spectral peak recognition. Such algorithm makes simultaneous measurement of Plasma spectrometry to detect thin film laser damage, and greatly improves work efficiency.

  17. An internal friction peak caused by hydrogen in maraging steel

    SciTech Connect

    Usui, Makoto; Asano, Shigeru

    1996-01-01

    Internal friction in hydrogen-charged iron and steel has so far been studied by a large number of investigators. For pure iron, a well-defined peak of internal friction has been observed under the cold-worked and hydrogen-charged conditions. This is called the hydrogen cold-work peak, or the Snoek-Koester relaxation, which originates from the hydrogen-dislocation interaction. In the present study, a high-strength maraging steel (Fe-18Ni-9Co-5Mo) was chosen as another high-alloy steel which is known to be very susceptible to hydrogen embrittlement. The purpose of this paper is to show a new internal friction peak caused by hydrogen in the maraging steel and to compare it with those found in stainless steels which have so far been studied as typical engineering high-alloy materials.

  18. Silver Peak Innovative Exploration Project (Ram Power Inc.)

    DOE Data Explorer

    Miller, Clay

    2010-01-01

    Data generated from the Silver Peak Innovative Exploration Project, in Esmeralda County, Nevada, encompasses a “deep-circulation (amagmatic)” meteoric-geothermal system circulating beneath basin-fill sediments locally blanketed with travertine in western Clayton Valley (lithium-rich brines from which have been mined for several decades). Spring- and shallow-borehole thermal-water geochemistry and geothermometry suggest that a Silver Peak geothermal reservoir is very likely to attain the temperature range 260- 300oF (~125-150oC), and may reach 300-340oF (~150-170oC) or higher (GeothermEx, Inc., 2006). Results of detailed geologic mapping, structural analysis, and conceptual modeling of the prospect (1) support the GeothermEx (op. cit.) assertion that the Silver Peak prospect has good potential for geothermal-power production; and (2) provide a theoretical geologic framework for further exploration and development of the resource. The Silver Peak prospect is situated in the transtensional (regional shearing coupled with extension) Walker Lane structural belt, and squarely within the late Miocene to Pliocene (11 Ma to ~5 Ma) Silver Peak-Lone Mountain metamorphic core complex (SPCC), a feature that accommodated initial displacement transfer between major right-lateral strike- slip fault zones on opposite sides of the Walker Lane. The SPCC consists essentially of a ductiley-deformed lower plate, or “core,” of Proterozoic metamorphic tectonites and tectonized Mesozoic granitoids separated by a regionally extensive, low-angle detachment fault from an upper plate of severely stretched and fractured structural slices of brittle, Proterozoic to Miocene-age lithologies. From a geothermal perspective, the detachment fault itself and some of the upper-plate structural sheets could function as important, if secondary, subhorizontal thermal-fluid aquifers in a Silver Peak hydrothermal system.

  19. Metals in Particulate Pollutants Affect Peak Expiratory Flow of Schoolchildren

    PubMed Central

    Hong, Yun-Chul; Hwang, Seung-Sik; Kim, Jin Hee; Lee, Kyoung-Ho; Lee, Hyun-Jung; Lee, Kwan-Hee; Yu, Seung-Do; Kim, Dae-Seon

    2007-01-01

    Background The contribution of the metal components of particulate pollutants to acute respiratory effects has not been adequately evaluated. Moreover, little is known about the effects of genetic polymorphisms of xenobiotic metabolism on pulmonary function. Objectives This study was conducted to assess lung function decrement associated with metal components in particulate pollutants and genetic polymorphisms of glutathione S-transferase M1 and T1. Methods We studied 43 schoolchildren who were in the 3rd to 6th grades. Each student measured peak expiratory flow rate three times a day for 42 days. Particulate air concentrations were monitored every day, and the concentrations of iron, manganese, lead, zinc, and aluminum in the particles were measured. Glutathione S-transferase M1 and T1 genetic polymorphisms were determined using DNA extracted from participant buccal washings. We used a mixed linear regression model to estimate the association between peak expiratory flow rate and particulate air pollutants. Results We found significant reduction in the peak expiratory flow rate after the children’s exposure to particulate pollutants. The effect was shown most significantly 1 day after exposure to the ambient particles. Manganese and lead in the particles also reduced the peak expiratory flow rate. Genetic polymorphisms of glutathione S-transferase M1 and T1 did not significantly affect peak expiratory flow rate. Conclusions This study demonstrated that particulate pollutants and metals such as manganese and lead in the particles are associated with a decrement of peak expiratory flow rate. These effects were robust even with consideration of genetic polymorphisms of glutathione S-transferase. PMID:17431494

  20. Copernicus crater central peak - Lunar mountain of unique composition

    NASA Technical Reports Server (NTRS)

    Pieters, C. M.

    1982-01-01

    Olivine is identified as the major mafic mineral in a central peak of Copernicus crater. Information on the mineral assemblages of such unsampled lunar surface material is provided by near infrared reflectance spectra (0.7 to 2.5 micrometers) obtained with earth-based telescopes. The composition of the deep-seated material comprising the Copernicus central peak is unique among measured areas. Other lunar terra areas and the wall of Copernicus exhibit spectral characteristics of mineral assemblages comparable to the feldspathic breccias returned by the Apollo missions, with low-calcium orthopyroxene being the major mafic mineral.

  1. Peptide mass fingerprinting peak intensity prediction: extracting knowledge from spectra.

    PubMed

    Gay, Steven; Binz, Pierre-Alain; Hochstrasser, Denis F; Appel, Ron D

    2002-10-01

    Matrix-assisted laser desorption/ionization-time of flight mass spectrometry has become a valuable tool in proteomics. With the increasing acquisition rate of mass spectrometers, one of the major issues is the development of accurate, efficient and automatic peptide mass fingerprinting (PMF) identification tools. Current tools are mostly based on counting the number of experimental peptide masses matching with theoretical masses. Almost all of them use additional criteria such as isoelectric point, molecular weight, PTMs, taxonomy or enzymatic cleavage rules to enhance prediction performance. However, these identification tools seldom use peak intensities as parameter as there is currently no model predicting the intensities based on the physicochemical properties of peptides. In this work, we used standard datamining methods such as classification and regression methods to find correlations between peak intensities and the properties of the peptides composing a PMF spectrum. These methods were applied on a dataset comprising a series of PMF experiments involving 157 proteins. We found that the C4.5 method gave the more informative results for the classification task (prediction of the presence or absence of a peptide in a spectra) and M5' for the regression methods (prediction of the normalized intensity of a peptide peak). The C4.5 result correctly classified 88% of the theoretical peaks; whereas the M5' peak intensities had a correlation coefficient of 0.6743 with the experimental peak intensities. These methods enabled us to obtain decision and model trees that can be directly used for prediction and identification of PMF results. The work performed permitted to lay the foundations of a method to analyze factors influencing the peak intensity of PMF spectra. A simple extension of this analysis could lead to improve the accuracy of the results by using a larger dataset. Additional peptide characteristics or even PMF experimental parameters can also be taken into

  2. Accuracy of the VO2peak prediction equation in firefighters

    PubMed Central

    2014-01-01

    Background A leading contributing factor to firefighter injury and death is lack of fitness. Therefore, the Fire Service Joint Labor Management Wellness-Fitness Initiative (WFI) was established that includes a focus on providing fitness assessments to all fire service personnel. The current fitness assessment includes a submaximal exercise test protocol and associated prediction equation to predict individual VO2peak as a measure of fitness. There is limited information on the accuracy, precision, and sources of error of this prediction equation. This study replicated previous research by validating the accuracy of the WFI VO2peak prediction equation for a group of firefighters and further examining potential sources of error for an individual firefighters’ assessment. Methods The sample consisted of 22 firefighters who completed a maximal exercise test protocol similar to the WFI submaximal protocol, but the test was terminated when firefighters reached a maximal level of exertion (i.e., measured VO2peak). We then calculated the predicted VO2peak based on the WFI prediction equation along with individual firefighters’ body mass index (BMI) and 85% of maximum heart rate. The data were analyzed using paired samples t-tests in SPSS v. 21.0. Results The difference between predicted and measured VO2peak was -0.77 ± 8.35 mL•kg-1•min-1. However, there was a weak, statistically non-significant association between measured VO2peak and predicted VO2peak (R2 = 0.09, F(1,21) = 2.05, p = 0.17). The intraclass correlation coefficient (ICC = 0.215, p > 0.05) and Pearson (r = 0.31, p = 0.17) and Spearman (ρ = 0.28, p = 0.21) correlation coefficients were small. The standard error of the estimate (SEE) was 8.5 mL•kg-1•min-1. Further, both age and baseline fitness level were associated with increased inaccuracy of the prediction equation. Conclusions We provide data on the inaccuracy and sources of error for the WFI VO2peak

  3. Backscattering peak of hexagonal ice columns and plates.

    PubMed

    Borovoi, A; Grishin, I; Naats, E; Oppel, U

    2000-09-15

    The backward cross section of hexagonal ice crystals of arbitrary orientation is calculated for visible light by means of a ray-tracing code. It is shown that backscattering of the tilted crystals is caused by a corner-reflector-like effect. A very large peak of backscattering is found for a tilt of 32.5 degrees between the principal particle axis and the incidence direction. This peak is caused by multiple total internal reflections for part of the rays that are incident upon the skewed rectangular faces. Slant lidar measurements for remote sensing of cirrus clouds are proposed. PMID:18066226

  4. Double-peaked sodium layers at high latitudes

    NASA Technical Reports Server (NTRS)

    Von Zahn, U.; Goldberg, R. A.; Stegman, J.; Witt, G.

    1989-01-01

    Na lidar observations indicate that at high latitudes in summer the neutral Na layer frequently attains a double-peaked structure. The main layer with a maximum near 90 km altitude is supplemented by a secondary, narrow layer near 95 km altitude. Results are presented concerning secondary sodium layers. It appears likely that the formation of secondary Na layers observed frequently above the lidar site is not solely a 'sodium phenomenon', but part of a more comprehensive layering process for metal atoms and ions. Na(+)/Na density ratios close to 0.5 near the peaks of both the main and secondary layers are derived.

  5. Prediction of a Photon Peak in Heavy Ion Collisions

    SciTech Connect

    Casalderrey-Solana, Jorge; Mateos, David

    2008-07-01

    We show that if a flavour-less vector meson remains bound after deconfinement, and if its limiting velocity in the quark-gluon plasma is subluminal, then this meson produces a distinct peak in the spectrum of thermal photons emitted by the plasma. We also demonstrate that this effect is a universal property of all strongly coupled, large-Nc plasmas with a gravity dual. For the J/psi the corresponding peak lies between 3 and 5 GeV and could be observed at LHC.

  6. Herschel und die Zukunft der Fern-Infrarot-Astronomie

    NASA Astrophysics Data System (ADS)

    Linz, Hendrik

    2015-06-01

    Schon lange ist die beobachtende Astronomie den engen Grenzen des optisch Sichbaren entwachsen und hat fast alle Bereiche des elektromagnetischen Spektrums für sich dienstbar gemacht. Im sogenannten nahen und mittleren Infrarot (Wellenlängen zwischen 1-30 μm) sowie im Millimeter- und Radio-Regime (Wellenlängen zwischen 1 mm und 10 m) ist die Erdatmosphäre relativ gut durchlässig für elektromagnetische Signale oder hat zumindest eine Vielzahl von spektral begrenzten Transmissionsfenstern, die astronomische Beobachtungen zumindest von höheren Bergen aus möglich machen. Allerdings ist das sogenannte Ferne Infrarot (FIR, 30-300 μm Wellenlänge) von der Erde aus fast völlig unzugänglich für astronomische Beobachtungen. Selbst für die besten Beobachtungsplätze der Erde bleibt die atmosphärische Transmission durch die immense Wasserdampf- Absorption auf ein absolutes Minimum beschränkt. Jedoch erlaubt uns das FIR Zugang zu Informationen, die sehr nützlich sind für die astrophysikalische Forschung und komplementär zu anderen Wellenlängen-Bereichen.

  7. Einfluss des Internets auf das Informations-, Einkaufs- und Verkehrsverhalten

    NASA Astrophysics Data System (ADS)

    Nerlich, Mark R.; Schiffner, Felix; Vogt, Walter

    Mit Daten aus eigenen Erhebungen können das einkaufsbezogene Informations- und Einkaufsverhalten im Zusammenhang mit den verkehrlichen Aspekten (Distanzen, Verkehrsmittel, Wegekopplungen) dargestellt werden. Die Differenzierung in die drei Produktkategorien des täglichen, mittelfristigen und des langfristigen Bedarfs berücksichtigt in erster Linie die Wertigkeit eines Gutes, die seine Erwerbshäufigkeit unmittelbar bestimmt. Der Einsatz moderner IKT wie das Internet eröffnet dem Endverbraucher neue Möglichkeiten bei Information und Einkauf. Die verkehrliche Relevanz von Online-Shopping wird deutlich, wenn man berücksichtigt, dass im Mittel rund 17% aller Online-Einkäufe, die die Probanden durchgeführt haben, Einkäufe in Ladengeschäften ersetzen. Dies gilt in verstärktem Maße für Online-Informationen: etwa die Hälfte hätte alternativ im stationären Einzelhandel stattgefunden. Da der Erwerb von Gütern des täglichen Bedarfs häufig nahräumlich und in relevantem Anteil nicht-motorisiert erfolgen kann, sind in diesem Segment - im Gegensatz zum mittel- und langfristigen Bedarf - nur geringe Substitutionseffekte zu beobachten.

  8. Informationsqualität - Definitionen, Dimensionen und Begriffe

    NASA Astrophysics Data System (ADS)

    Rohweder, Jan Philipp; Kasten, Gerhard; Malzahn, Dirk; Piro, Andrea; Schmid, Joachim

    Die Verbesserung und Sicherstellung der Informationsqualität wird in immer mehr Unternehmen als eigenständige Managementaufgabe von großer Wichtigkeit begriffen. IQ-Management ist ein elementarer Baustein in Systemintegrationsprojekten. Aber auch in bestehenden Prozessen mit heterogenen Datenquellen und Informationsnutzern ist eine hohe Informationsqualität die Grundvoraussetzung für funktionierende betriebliche Abläufe. Voraussetzung für ein effektives IQ-Management ist die Bewertung der Informationsqualität [Lee et al. 2006, S. 13 und S. 27]. In vielen Unternehmen ist Informationsqualität nur ein gefühlter Wert. Die meisten Anwender bringen ein gewisses Misstrauen den Daten gegenüber zum Ausdruck, dies jedoch ohne genaue Angabe der Fehlerart und -häufigkeit. Nicht selten werden kostspielige Projekte angestoßen, um die Informationsqualität zu verbessern, ohne sich vor einer IQ-Maßnahme durch eine Analyse ein genaues Bild über die tatsächlichen Probleme zu verschaffen. Nur auf der Basis einer umfassenden Bewertung der Informationsqualität können die notwendigen Ressourcenentscheidungen herbeigeführt, Ziele gesetzt und der Erfolg des IQ-Management beurteilt werden.

  9. Peak Communication Experiences: Concept, Structure, and Sex Differences.

    ERIC Educational Resources Information Center

    Gordon, Ron; Dulaney, Earl

    A study was conducted to test a "peak communication experience" (PCE) scale developed from Abraham Maslow's theory of PCE's, a model of one's highest interpersonal communication moments in terms of perceived mutual understanding, happiness, and personal fulfillment. Nineteen items, extrapolated from Maslow's model but rendered more generally…

  10. Algorithm for systematic peak extraction from atomic pair distribution functions.

    PubMed

    Granlund, L; Billinge, S J L; Duxbury, P M

    2015-07-01

    The study presents an algorithm, ParSCAPE, for model-independent extraction of peak positions and intensities from atomic pair distribution functions (PDFs). It provides a statistically motivated method for determining parsimony of extracted peak models using the information-theoretic Akaike information criterion (AIC) applied to plausible models generated within an iterative framework of clustering and chi-square fitting. All parameters the algorithm uses are in principle known or estimable from experiment, though careful judgment must be applied when estimating the PDF baseline of nanostructured materials. ParSCAPE has been implemented in the Python program SrMise. Algorithm performance is examined on synchrotron X-ray PDFs of 16 bulk crystals and two nanoparticles using AIC-based multimodeling techniques, and particularly the impact of experimental uncertainties on extracted models. It is quite resistant to misidentification of spurious peaks coming from noise and termination effects, even in the absence of a constraining structural model. Structure solution from automatically extracted peaks using the Liga algorithm is demonstrated for 14 crystals and for C60. Special attention is given to the information content of the PDF, theory and practice of the AIC, as well as the algorithm's limitations. PMID:26131896

  11. Assessment of a peak flow whistle in nonasthmatic children.

    PubMed

    Terblanche, E; Fourie, P R; Wessels, J A

    1999-06-01

    We tested the agreement of peak expiratory flow (PEF) measurements between an electronic spirometer and a peak flow whistle (Whistle Watch, HarMed, Capetown, South Africa). One hundred and three healthy children between ages 6-13 years and with no previous experience in lung function tests participated in the study. Sequential PEF-readings were obtained from the spirometer and the peak flow whistle; all children had an equal number of attempts using both devices. In the case of the spirometer, the highest PEF reading of three acceptable and reproducible efforts was noted as the best PEF (PEF(SPIRO)). Whistle Watch readings were taken as the highest value when the child could activate the whistle. Despite a strong correlation (r = 0.91; R2 = 83%) between the readings of the spirometer and Whistle Watch, there was a lack of agreement between the two devices. For any individual subject, the 95% probability interval ranged between +30.4 to -47 L.min(-1); 64% of the children obtained higher PEF-values on Whistle Watch, compared to the spirometer. These findings suggest that the whistle sound of the peak flow whistle was a significant incentive, which resulted in greater maximal expiratory efforts. PMID:10380096

  12. Analysis of thermoluminescent glow peaks of zoisite under beta irradiations

    SciTech Connect

    Ccallata, Henry Javier; Watanabe, Shigueo

    2010-08-04

    In this study, the thermoluminescence (TL) properties of natural crystal of zoisite were investigated after beta ({sup 90}Sr) irradiation at room temperature (RT). Zoisite, of chemical formula Ca{sub 2}Al{sub 3}(SiO{sub 4})(Si{sub 2}O{sub 7})O(OH), is found in Minas Gerais State, Brazil as natural mineral of silicate, member of the epidote group. The glow curve of a natural sample submitted to a heat treatment at 600 deg. C is composed of two broad peaks, centered at about 110-130 deg. C and another one at about 205-210 deg. C. A heating rate of 4 deg. C s{sup -1} was used in the temperature range from RT to 300 deg. C. The additive dose, T{sub m}-T{sub STOP} thermal cleaning, initial rise, variable heating rate and computerized glow curve deconvolution methods have shown that the glow curve is a superposition of six peaks at 100, 130, 155, 175, 200 and 230 deg. C. The trapping parameters for the individual peaks have been calculated. The TL dose response of 130 and 200 deg. C peaks has a linear response. Zoisite is a candidate for a TL dosimeter because of its high sensitivity.

  13. 27 CFR 9.220 - Pine Mountain-Cloverdale Peak.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Pine Mountain-Cloverdale... Areas § 9.220 Pine Mountain-Cloverdale Peak. (a) Name. The name of the viticultural area described in this section is “Pine Mountain-Cloverdale Peak”. For purposes of part 4 of this chapter, “Pine...

  14. 27 CFR 9.220 - Pine Mountain-Cloverdale Peak.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Pine Mountain-Cloverdale... Areas § 9.220 Pine Mountain-Cloverdale Peak. (a) Name. The name of the viticultural area described in this section is “Pine Mountain-Cloverdale Peak”. For purposes of part 4 of this chapter, “Pine...

  15. Off-peak electric energy for poultry feed processing

    SciTech Connect

    Tyson, E.J.

    1987-01-01

    Off-peak electric energy can be used for poultry feed processing, achieving substantial reduction in electric energy cost. In addition, high efficiency equipment and conservation measures add to energy cost savings. Careful planning and evaluation of time-of-use rates can maximize the savings for each type of enterprise.

  16. Experimental Study on Peak Shear Strength Criterion for Rock Joints

    NASA Astrophysics Data System (ADS)

    Yang, Jie; Rong, Guan; Hou, Di; Peng, Jun; Zhou, Chuangbing

    2016-03-01

    The three-dimensional (3D) morphology of a rock joint has a great impact on its shear behavior. To study the relationship between the 3D morphological characteristics and the peak shear strength, several tilt tests were conducted on four groups of tensile fractures and direct shear tests were carried out under different constant normal loads (CNL). The normal load ranges from 0.325 to 8.0 MPa. In this study, fresh tensile fractures which were splitted from granite and sandstone samples were used. The morphology of each tensile fracture was measured before direct shear tests. A new peak shear strength criterion for rock joints is proposed using two 3D morphological parameters which are termed as the maximum apparent dip angle θ_{max}^{*} and the roughness parameter C. The calculated peak strengths using the proposed criterion match well with the observed values. In addition, a comparison of the proposed model with the Grasselli's model (2003) and Xia's model (2014) shows that the proposed model is easier in the form and gives a rational improvement. At last, direct shear test data of tensile fractures which are collected from Grasselli (2003) are used to verify the proposed model. It is seen that the proposed model has a reliable estimate of the peak shear strength of tensile fractures and presumably for rock joints.

  17. Cross-peak-specific two-dimensional electronic spectroscopy

    PubMed Central

    Read, Elizabeth L.; Engel, Gregory S.; Calhoun, Tessa R.; Mančal, Tomáš; Ahn, Tae Kyu; Blankenship, Robert E.; Fleming, Graham R.

    2007-01-01

    Intermolecular electronic coupling dictates the optical properties of molecular aggregate systems. Of particular interest are photosynthetic pigment–protein complexes that absorb sunlight then efficiently direct energy toward the photosynthetic reaction center. Two-dimensional (2D) ultrafast spectroscopy has been used widely in the infrared (IR) and increasingly in the visible to probe excitonic couplings and observe dynamics, but the off-diagonal spectral signatures of coupling are often obscured by broad diagonal peaks, especially in the visible regime. Rotating the polarizations of the laser pulses exciting the sample can highlight certain spectral features, and the use of polarized pulse sequences to elucidate cross-peaks in 2D spectra has been demonstrated in the IR for vibrational transitions. Here we develop 2D electronic spectroscopy using cross-peak-specific pulse polarization conditions in an investigation of the Fenna–Matthews–Olson light harvesting complex from green photosynthetic bacteria. Our measurements successfully highlight off-diagonal features of the 2D spectra and, in combination with an analysis based on the signs of features arising from particular energy level pathways and theoretical simulation, we characterize the dominant response pathways responsible for the spectral features. Cross-peak-specific 2D electronic spectroscopy provides insight into the interchromophore couplings, as well as into the energetic pathways giving rise to the signal. With femtosecond resolution, we also observe dynamical processes that depend on these couplings and interactions with the protein environment. PMID:17548830

  18. 40. Peaks of Otter Visitor Center. The stone faced visitor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    40. Peaks of Otter Visitor Center. The stone faced visitor was completed in 1957 with a comfort station added in the mid-1960's. View is to the northwest. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

  19. 45. Peaks of Otter, Rosser Cabin. The cabin had been ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. Peaks of Otter, Rosser Cabin. The cabin had been interpreted by the National Park Service ad Polly Woods Ordinary since its relocation from the present location of Abbott Lake. Looking north. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

  20. Flood peaks and discharge summaries in the Delaware River basin

    USGS Publications Warehouse

    Vickers, A.A.; Farsett, Harry A.; Green, J. Wayne

    1981-01-01

    This report contains streamflow data from 299 continuous and partial-record gaging stations in the Delaware River basin. The location, drainage area, period of record, type of gage, and average flow (discharge) is given for each continuous station. Also included, are annual flood peak discharges and discharges above a selected base, annual and monthly mean discharges, and annual and monthly runoff. (USGS)

  1. Peak functions for modeling high resolution soil profile data

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Parametric and non-parametric depth functions have been used to estimate continuous soil profile properties. However, some soil properties, such as those seen in weathered loess, have complex peaked and anisotropic depth distributions. These distributions are poorly handled by common parametric func...

  2. Extreme value statistics of weak lensing shear peak counts

    NASA Astrophysics Data System (ADS)

    Reischke, R.; Maturi, M.; Bartelmann, M.

    2016-02-01

    The statistics of peaks in weak gravitational lensing maps is a promising technique to constrain cosmological parameters in present and future surveys. Here we investigate its power when using general extreme value statistics which is very sensitive to the exponential tail of the halo mass function. To this end, we use an analytic method to quantify the number of weak lensing peaks caused by galaxy clusters, large-scale structures and observational noise. Doing so, we further improve the method in the regime of high signal-to-noise ratios dominated by non-linear structures by accounting for the embedding of those counts into the surrounding shear caused by large-scale structures. We derive the extreme value and order statistics for both overdensities (positive peaks) and underdensities (negative peaks) and provide an optimized criterion to split a wide field survey into subfields in order to sample the distribution of extreme values such that the expected objects causing the largest signals are mostly due to galaxy clusters. We find good agreement of our model predictions with a ray-tracing N-body simulation. For a Euclid-like survey, we find tight constraints on σ8 and Ωm with relative uncertainties of ˜10-3. In contrast, the equation of state parameter w0 can be constrained only with a 10 per cent level, and wa is out of reach even if we include redshift information.

  3. PEAK STREAMFLOW - VIRGINIA PORTION OF THE ALBEMARLE-PAMLICO ESTUARY

    EPA Science Inventory

    Peak discharge data from the U.S. Geological Survey (http://waterdata.usgs.gov/nwis-w/VA) for gaging stations within the Virginia portion of the Albemarle-Pamlico Estuary watershed. Record dates vary by gaging station. Data for each station are located in a text file named by sta...

  4. [Peak sound pressure levels of gunshots from starter's pistols].

    PubMed

    Rothschild, M A; Dieker, L; Prante, H; Maschke, C

    1998-12-01

    Starter's pistols are often bought for self-defense, but can also be used for criminal activities (e.g. assaults, etc.). When a starter's pistol is loaded with blank cartridges and is fired, a powerful shooting noise results. The level of the noise produced is high enough to cause acoustic trauma. For legal examinations and giving an expert opinion further information is needed about the power of such noise. We examined how high peak sound pressure levels were of the gunshots of blank cartridges and whether there existed any directional characteristics from the noise emissions. In all, 15 different models of starter's pistols of 8 different calibres were examined. In addition to blank cartridges, 8 mm tear gas cartridges were also examined. Four transducers were situated in the horizontal plane around the muzzle: 0 degree (shooting direction), 45 degrees, 90 degrees, and 180 degrees (towards the firer). The distances between the transducers and the muzzle were 25 cm, 50 cm, 100 cm, and 200 cm. At a distance of 1 m and in the 0 degree shooting direction the peak sound pressure levels of nearly all weapons tested exceeded 160 dB. At a shooting distance of 25 cm the peak sound pressure levels reached 181 dB. In addition, we observed a directional characteristic concerning the emission of noise: pistols produced higher peak sound pressure levels to the front than backwards towards the firer. PMID:10023593

  5. Automatic Locking of Laser Frequency to an Absorption Peak

    NASA Technical Reports Server (NTRS)

    Koch, Grady J.

    2006-01-01

    An electronic system adjusts the frequency of a tunable laser, eventually locking the frequency to a peak in the optical absorption spectrum of a gas (or of a Fabry-Perot cavity that has an absorption peak like that of a gas). This system was developed to enable precise locking of the frequency of a laser used in differential absorption LIDAR measurements of trace atmospheric gases. This system also has great commercial potential as a prototype of means for precise control of frequencies of lasers in future dense wavelength-division-multiplexing optical communications systems. The operation of this system is completely automatic: Unlike in the operation of some prior laser-frequency-locking systems, there is ordinarily no need for a human operator to adjust the frequency manually to an initial value close enough to the peak to enable automatic locking to take over. Instead, this system also automatically performs the initial adjustment. The system (see Figure 1) is based on a concept of (1) initially modulating the laser frequency to sweep it through a spectral range that includes the desired absorption peak, (2) determining the derivative of the absorption peak with respect to the laser frequency for use as an error signal, (3) identifying the desired frequency [at the very top (which is also the middle) of the peak] as the frequency where the derivative goes to zero, and (4) thereafter keeping the frequency within a locking range and adjusting the frequency as needed to keep the derivative (the error signal) as close as possible to zero. More specifically, the system utilizes the fact that in addition to a zero crossing at the top of the absorption peak, the error signal also closely approximates a straight line in the vicinity of the zero crossing (see Figure 2). This vicinity is the locking range because the linearity of the error signal in this range makes it useful as a source of feedback for a proportional + integral + derivative control scheme that

  6. Peak Dose Assessment for Proposed DOE-PPPO Authorized Limits

    SciTech Connect

    Maldonado, Delis

    2012-06-01

    The Oak Ridge Institute for Science and Education (ORISE), a U.S. Department of Energy (DOE) prime contractor, was contracted by the DOE Portsmouth/Paducah Project Office (DOE-PPPO) to conduct a peak dose assessment in support of the Authorized Limits Request for Solid Waste Disposal at Landfill C-746-U at the Paducah Gaseous Diffusion Plant (DOE-PPPO 2011a). The peak doses were calculated based on the DOE-PPPO Proposed Single Radionuclides Soil Guidelines and the DOE-PPPO Proposed Authorized Limits (AL) Volumetric Concentrations available in DOE-PPPO 2011a. This work is provided as an appendix to the Dose Modeling Evaluations and Technical Support Document for the Authorized Limits Request for the C-746-U Landfill at the Paducah Gaseous Diffusion Plant, Paducah, Kentucky (ORISE 2012). The receptors evaluated in ORISE 2012 were selected by the DOE-PPPO for the additional peak dose evaluations. These receptors included a Landfill Worker, Trespasser, Resident Farmer (onsite), Resident Gardener, Recreational User, Outdoor Worker and an Offsite Resident Farmer. The RESRAD (Version 6.5) and RESRAD-OFFSITE (Version 2.5) computer codes were used for the peak dose assessments. Deterministic peak dose assessments were performed for all the receptors and a probabilistic dose assessment was performed only for the Offsite Resident Farmer at the request of the DOE-PPPO. In a deterministic analysis, a single input value results in a single output value. In other words, a deterministic analysis uses single parameter values for every variable in the code. By contrast, a probabilistic approach assigns parameter ranges to certain variables, and the code randomly selects the values for each variable from the parameter range each time it calculates the dose (NRC 2006). The receptor scenarios, computer codes and parameter input files were previously used in ORISE 2012. A few modifications were made to the parameter input files as appropriate for this effort. Some of these changes

  7. IQM-Reifegradmodell für die Bewertung und Verbesserung des Information Lifecycle Management Prozesses

    NASA Astrophysics Data System (ADS)

    Baškarada, Saša; Gebauer, Marcus; Koronios, Andy; Gao, Jing

    Heutige Organisationen produzieren und speichern mehr Informationen als je zuvor. Der resultierende Informationsüberfluss, zusammen mit einem Mangel an Qualitätssicherung für das Information Lifecycle Management, führt zu einem unsicheren Status der Informationsqualität in vielen Organisationen. Weiterhin hat sich herausgestellt, dass das Bewerten, Verbessern und Steuern der Informationsqualität ein offenkundig schwieriges Unterfangen ist. Dieses Kapitel stellt ein Modell zur Bewertung und Verbesserung der Information Quality Management Capability Maturity (IQM-Reifegrad) vor. Es wird ein Satz von Kriterien vorgestellt, der aus Literaturrecherche und Fallstudien abgeleitet wurde. Die Reifegradindikatoren werden validiert und in einem mehrstufigen Reifegradmodell durch eine Delphi-Studie gruppiert. Das abgeleitete IQM-Reifegradmodell hilft Organisationen ihre bestehenden Praktiken im IQM zu bewerten und potentielle Lücken und Verbesserungsstrategien zu ermitteln.

  8. Endoskopie, minimal invasive chirurgische und navigierte Verfahren in der Urologie

    NASA Astrophysics Data System (ADS)

    Grosse, Joachim; von Walter, Matthias; Jakse, Gerhard

    Betrachtet man die letzten 100 Jahre der Urologie in Deutschland seit Gründung ihrer Fachgesellschaft 1906 in Stuttgart, so sind sicherlich die letzten 25 Jahre von umfassenden Entwicklungen mit z. T. vollständigen Umwälzungen bisheriger Therapien und Methoden auf urologischen Fachgebiet gekennzeichnet. In erster Linie handelte es sich dabei um minimal invasive endoskopische Techniken wie perkutane Nierenchirurgie, Ureterorenoskopie, videoendoskopisch unterstütze transurethrale Elektroresektionen der Prostata und von Blasentumore sowie die Laparoskopie. Sie führten zu besseren operativen Ergebnissen und einer deutlichen Senkung der Morbidität der entsprechenden Behandlung urologischer Krankheitsbilder, mit der Konsequenz, dass einige bisher als Standard gültige offene Operationsverfahren abgelöst wurden.

  9. Aerobic power and peak power of elite America's Cup sailors.

    PubMed

    Neville, Vernon; Pain, Matthew T G; Folland, Jonathan P

    2009-05-01

    Big-boat yacht racing is one of the only able bodied sporting activities where standing arm-cranking ('grinding') is the primary physical activity. However, the physiological capabilities of elite sailors for standing arm-cranking have been largely unreported. The purpose of the study was to assess aerobic parameters, VO(2peak) and onset of blood lactate (OBLA), and anaerobic performance, torque-crank velocity and power-crank velocity relationships and therefore peak power (P (max)) and optimum crank-velocity (omega(opt)), of America's Cup sailors during standing arm-cranking. Thirty-three elite professional sailors performed a step test to exhaustion, and a subset of ten grinders performed maximal 7 s isokinetic sprints at different crank velocities, using a standing arm-crank ergometer. VO(2peak) was 4.7 +/- 0.5 L/min (range 3.6-5.5 L/min) at a power output of 332 +/- 44 W (range 235-425 W). OBLA occurred at a power output of 202 +/- 31 W (61% of W(max)) and VO(2) of 3.3 +/- 0.4 L/min (71% of VO(2peak)). The torque-crank velocity relationship was linear for all participants (r = 0.9 +/- 0.1). P (max) was 1,420 +/- 37 W (range 1,192-1,617 W), and omega(opt) was 125 +/- 6 rpm. These data are among the highest upper-body anaerobic and aerobic power values reported. The unique nature of these athletes, with their high fat-free mass and specific selection and training for standing arm cranking, likely accounts for the high values. The influence of crank velocity on peak power implies that power production during on-board 'grinding' may be optimised through the use of appropriate gear-ratios and the development of efficient gear change mechanisms. PMID:19234715

  10. Reinterpretation of Mormon Peak detachment in Mormon Mountains, southern Nevada

    SciTech Connect

    Carpenter, J.A.

    1988-02-01

    Brian Wernicke proposed that the Meadow Valley Mountains are part of a west-directed Mormon Peak extensional allochthon and that low-angle normal faults control basin-and-range structure. He suggested the Meadow Valley Mountains detached off the Mormon Mountains and moved 20 km during the middle to late Miocene, along a low-angle normal fault - the Mormon Peak detachment - dipping 20/degrees/-25/degrees/ west. In this interpretation, the updip source area for the paleozoic klippen of the Mormon Peak extensional allochthon now exposed in the Mormon Mountains requires an origin from heights greater than 9 km (30,000 ft) above the present Virgin Valley basin. K-Ar and seismic reflection data document syntectonic sedimentary in-filling of the Virgin Valley basin beginning during the early Oligocene in response to the high-angle (60/degrees/) Virgin-Beaver Dam Mountains normal fault. Klippen of the purported Mormon Peak extensional allochthon that veneer the Mormon Mountains represent gravity-slide blocks that have source areas within the Mormon Mountains and require only 0.5-4 km displacements. These gravity-slide blocks moved in various downslope directions on rootless denudational faults resulting from the loss of lateral support because of high-angle basin-range faulting and associated erosion. Detailed mapping of Wernicke's easternmost klippe of the Mormon Peak extensional allochthon reveals east-vergent structural features rather than west-vergent, as necessary in his uniform sense-core complex model. Geologic and geophysical data show that high-angle normal faults exert primary control over basin-and-range structure, whereas gravitational sliding is a secondary surficial (rootless) feature of minor significance.

  11. Opdic (optimized Peak, Distortion and Clutter) Detection Filter.

    NASA Astrophysics Data System (ADS)

    House, Gregory Philip

    1995-01-01

    Detection is considered. This involves determining regions of interest (ROIs) in a scene: the locations of multiple object classes in a scene in clutter when object distortions and contrast differences are present. High probability of detection P_{D} is essential and low P_{FA } is desirable since subsequent stages in the full system will only decrease P_{FA } and cannot increase P_{D }. Low resolution blob objects and objects with more internal detail are considered with both 3-D aspect view and depression angle distortions present. Extensive tests were conducted on 56 scenes with object classes not present in the training set. A modified MINACE (Minimum Noise and Correlation Energy) distortion-invariant filter was used. This minimizes correlation plane energy due to distortions and clutter while satisfying correlation peak constraint values for various object-aspect views. The filter was modified with a new object model (to give predictable output peak values) and a new correlated noise clutter model; a white Gaussian noise model of distortion was used; and a new techniques to increase the number of training set images (N _{T}) included in the filter were developed. Excellent results were obtained. However, the correlation plane distortion and clutter energy functions were found to become worse as N_{T } was increased and no rigorous method exists to select the best N_{T} (when to stop filter synthesis). A new OPDIC (Optimized Peak, Distortion, and Clutter) filter was thus devised. This filter retained the new object, clutter and distortion models noted. It minimizes the variance of the correlation peak values for all training set images (not just the N_{T} images). As N _{T} increases, the peak variance and the objective functions (correlation plane distortion and clutter energy) are all minimized. Thus, this new filter optimizes the desired functions and provides an easy way to stop filter synthesis (when the objective function is minimized). Tests show

  12. Terror mit Atomwaffen: reale Gefahr? Nukleare und Radiologische Waffen

    NASA Astrophysics Data System (ADS)

    Harigel, Gert G.

    2006-01-01

    Können Terroristen sich nukleare Massenvernichtungswaffen beschaffen? Dazu müssten sie ausreichende Mengen an waffenfähigem, spaltbarem Material stehlen. Selbst der Bau einer primitiven Atombombe erfordert einen hohen technischen Aufwand und Spezialisten. Wahrscheinlicher ist deshalb der Diebstahl einer kleinen taktischen Kernwaffe. Alternativ könnten Terroristen sich radioaktives Material aus zivilen Quellen beschaffen und daraus eine Schmutzige Bombe bauen. Eine solche radiologische Waffe wäre keine echte Massenvernichtungswaffe, doch ihre psychologische Wirkung könnte stark sein. Das macht sie für Terroristen attraktiv, weswegen diese Gefahr ernst genommen werden muss.

  13. Ionoacoustic characterization of the proton Bragg peak with submillimeter accuracy

    SciTech Connect

    Assmann, W. Reinhardt, S.; Lehrack, S.; Edlich, A.; Thirolf, P. G.; Parodi, K.; Kellnberger, S.; Omar, M.; Ntziachristos, V.; Moser, M.; Dollinger, G.

    2015-02-15

    Purpose: Range verification in ion beam therapy relies to date on nuclear imaging techniques which require complex and costly detector systems. A different approach is the detection of thermoacoustic signals that are generated due to localized energy loss of ion beams in tissue (ionoacoustics). Aim of this work was to study experimentally the achievable position resolution of ionoacoustics under idealized conditions using high frequency ultrasonic transducers and a specifically selected probing beam. Methods: A water phantom was irradiated by a pulsed 20 MeV proton beam with varying pulse intensity and length. The acoustic signal of single proton pulses was measured by different PZT-based ultrasound detectors (3.5 and 10 MHz central frequencies). The proton dose distribution in water was calculated by Geant4 and used as input for simulation of the generated acoustic wave by the matlab toolbox k-WAVE. Results: In measurements from this study, a clear signal of the Bragg peak was observed for an energy deposition as low as 10{sup 12} eV. The signal amplitude showed a linear increase with particle number per pulse and thus, dose. Bragg peak position measurements were reproducible within ±30 μm and agreed with Geant4 simulations to better than 100 μm. The ionoacoustic signal pattern allowed for a detailed analysis of the Bragg peak and could be well reproduced by k-WAVE simulations. Conclusions: The authors have studied the ionoacoustic signal of the Bragg peak in experiments using a 20 MeV proton beam with its correspondingly localized energy deposition, demonstrating submillimeter position resolution and providing a deep insight in the correlation between the acoustic signal and Bragg peak shape. These results, together with earlier experiments and new simulations (including the results in this study) at higher energies, suggest ionoacoustics as a technique for range verification in particle therapy at locations, where the tumor can be localized by ultrasound

  14. Asthma-like peak flow variability in various lung diseases

    PubMed Central

    Singh, Virendra; Meena, Pradeep; Sharma, Bharat Bhushan

    2012-01-01

    Background and Objectives: Bronchodilator reversibility and diurnal peak flow variability are considered characteristic of asthma patients. Patients with chronic obstructive pulmonary disease (COPD) show poor reversibility. But reversibility and variability in other pulmonary diseases manifesting with airflow obstruction in not known. Therefore, we assessed reversibility and peak flow variability in patients with various lung diseases to recognize the pattern. Materials and Methods: Seventy consecutive patients with a diagnosis of lung diseases manifesting with airflow obstruction were recruited in the study. These included 23 patients with asthma, 11 patients with bronchiectasis, 16 patients with post-tubercular lung disease (PTLD), and 20 patients with COPD. Ten healthy matched control subjects were also selected to pair with asthmatic patients. Bronchodilator reversibility test was done initially and peak expiratory flow rate (PEFR) was measured for a duration of 1 week by patients themselves on a chart that was given to them. The mean amplitude percentage of these records were analyzed. Results: The mean values of peak flow variability were 14.73% ± 6.1% in asthmatic patients, 11.98% ± 7.5% in patients with bronchiectasis, and 10.54% ± 5.3% in PTLD. The difference in the mean values of peak flow variability between asthma and bronchiectasis, that is, 14.73 (6.1) vs 11.98 (7.5) was not statistically significant (P > 0.05). Forced expiratory volume one second (FEV1) reversibility values were 14.77% ± 26.93%, 11.24% ± 20.43%, 10.85% ± 13.02%, 16.83% ± 22.84%, and 5.47% ± 4.99% in asthma, COPD, PTLD, bronchiectasis, and healthy subjects, respectively. Conclusion: Both reversibility and diurnal peak flow variability were higher in patients with various lung diseases compared with normal healthy subjects. Although these are characteristic of asthma, some cases of bronchiectasis and PTLD patients may also manifest asthma-like PEFR variability and reversibility

  15. Chicxulub Peak Ring Characteristics from 2D Reflection Seismic Survey

    NASA Astrophysics Data System (ADS)

    Mendoza-Cervantes, K.; Fucugauchi, J. U.; Gulick, S.

    2007-05-01

    Since 1980's research interest over Chicxulub crater located SE Gulf of Mexico, has grown not only because its relationship with the K-P(Cretaseous -Paleogene) extinction but because of its size (diameter ~ 200 km) and grade of preservation. Based on results from several surveys using different geophysical methods, Chicxulub has been classified as a multiring crater. A topographic high rising from crater floor was first recognized as the Chicxulub peak ring on four 1996 reflection seismic profiles but the low density of this data set made impossible to describe on detail this structure. Recently, during 2005 we carried out a marine survey acquiring 29 profiles. A grid located over the central marine portion of the crater was conformed by eleven profiles 80 km long oriented WSW-ENE and ten 25 km long NW-SE. Data was recorded on 480 channels spaced 12.5 cm on a 6 km streamer and air guns were shot every 50 m allowing us to image the earth up to 14 s TWTT. This new data set along with the 1996 profiles allow us to build up the first 3D image of Chicxulub peak ring as well as to analyze some important features of this ring. Results show that the peak ring lays down closer to the surface and the crater rim on its NW portion where it rises more abruptly from the crater floor reaching up to 430 m. Based on the information of the radial lines this characteristics change in clockwise direction being opposite on the NE. The relationship between the peak ring and other Chicxulub structures,such as the slump blocks and the dipping reflector, change as well in the same direction indicating that the peak ring is displaced to the NW. These asymmetries could be related to the process of formation of the peak ring as a result of: a)an asymmetric collapse of the central uplift which has been proved not to be related to impact direction, b) displacement of the central uplift towards the transient cavity rim or c)heterogeneities on impact surface predating the impact.

  16. Determination of the diagnostic x-ray tube practical peak voltage (PPV) from average or average peak voltage measurements.

    PubMed

    Hourdakis, C J

    2011-04-01

    The practical peak voltage (PPV) has been adopted as the reference measuring quantity for the x-ray tube voltage. However, the majority of commercial kV-meter models measure the average peak, Ū(P), the average, Ū, the effective, U(eff) or the maximum peak, U(P) tube voltage. This work proposed a method for determination of the PPV from measurements with a kV-meter that measures the average Ū or the average peak, Ū(p) voltage. The kV-meter reading can be converted to the PPV by applying appropriate calibration coefficients and conversion factors. The average peak k(PPV,kVp) and the average k(PPV,Uav) conversion factors were calculated from virtual voltage waveforms for conventional diagnostic radiology (50-150 kV) and mammography (22-35 kV) tube voltages and for voltage ripples from 0% to 100%. Regression equation and coefficients provide the appropriate conversion factors at any given tube voltage and ripple. The influence of voltage waveform irregularities, like 'spikes' and pulse amplitude variations, on the conversion factors was investigated and discussed. The proposed method and the conversion factors were tested using six commercial kV-meters at several x-ray units. The deviations between the reference and the calculated-according to the proposed method-PPV values were less than 2%. Practical aspects on the voltage ripple measurement were addressed and discussed. The proposed method provides a rigorous base to determine the PPV with kV-meters from Ū(p) and Ū measurement. Users can benefit, since all kV-meters, irrespective of their measuring quantity, can be used to determine the PPV, complying with the IEC standard requirements. PMID:21403184

  17. Empirical model of ionospheric storm effects on the F2 layer peak height associated with changes of peak electron density

    NASA Astrophysics Data System (ADS)

    Gulyaeva, T. L.

    2012-02-01

    An empirical model of storm-time behavior of the ionospheric peak height hmF2 associated with changes of peak electron density NmF2 is inferred from the topside true-height profiles provided by ISIS 1, ISIS 2, IK-19, and Cosmos-1809 satellites for the period of 1969-1987. The topside-derived quiet-time models of the ionospheric peak height hqF2 and peak electron density NqF2 are used as a frame of reference. To harmonize the model with storm and substorm effects induced by large-scale traveling ionospheric disturbances (LSTIDs), constraints are applied to the topside data, excluding their changes deviating above LSTID extreme limits. The degree of disturbance is estimated by the ionospheric weather W index; then, the least squares fitting is applied to the median of log(hm/hq) versus log(Nm/Nq). Anticorrelation between instant changes of hmF2 and NmF2 has a particular seasonal-magnetic latitude structure varying with solar activity that is used for the buildup of the analytical model. The model allows the deduction of the instantaneous hmF2 associated with the assessment or forecast of the respective NmF2. The model is validated with the data of five ground-based ionosondes during severe space weather storms at times of high solar activity (2000) and low solar activity (2006), and results agree reasonably well with the peak parameters derived from an ionogram. The model is incorporated into the coupled International Reference Ionosphere-Plasmasphere (IRI-Plas) code, used in the assimilative mode as the three-dimensional (3-D) interpolator of the GPS-derived total electron content, TECgps.

  18. A peak and decline in North Atlantic CO2 uptake

    NASA Astrophysics Data System (ADS)

    Halloran, Paul; Lebehot, Alice; Watson, Andy; McNeall, Doug; Schuster, Ute; Voelker, Christoph; Booth, Ben; Totterdell, Ian; Jones, Chris; Lambert, Hugo

    2016-04-01

    The oceans play a vital role in mitigating climate change by removing anthropogenic CO2 from the atmosphere. Presently, only around half of human-emitted CO2 remains in the atmosphere, with the rest being taken up by the land and ocean carbon sinks in approximately equal proportions. Of the ocean's CO2 uptake, that occurring in that high-latitude North Atlantic is the most intense. We develop a theoretical framework which proposes that Subpolar North Atlantic CO2 uptake is likely to peak and decline within the coming century. Considering the CMIP5 models within this framework, and comparing their behaviour to observations, we find that the CMIP5 models underestimate how close the real world's Subpolar North Atlantic CO2 uptake is to reaching peak uptake.

  19. Peak accelerations from the 17 October 1989 Loma Prieta earthquake

    USGS Publications Warehouse

    Boore, D.M.; Seekins, L.; Joyner, W.B.

    1989-01-01

    Peak accelerations of the Loma Prieta main shock have been tabulated from instruments maintained by a number of organizations. A subset of 86 records from nominally free-field sites have been analyzed which have been subdivided into rock, alluvium, and bay-mud categories according to data available in various reports. After correction for attenuation, the peak accelerations on rock, alluvium, and bay-mud sites are factors of 1.6, 1.8 and 4.5 larger, on the average, than Joyner and Boore's (1988) predicted values for a M=6.9 earthquake. The Loma Prieta earthquake provided the first opportunity to study the relative amplitudes from strong-motion recordings. -from Authors

  20. Evaluations of pleasurable experiences: the peak-end rule.

    PubMed

    Do, Amy M; Rupert, Alexander V; Wolford, George

    2008-02-01

    Prior research suggests that the addition of mild pain to an aversive event may lead people to prefer and directly choose more pain over less pain (Kahneman, Fredrickson, Schreiber, & Redelmeier, 1993). Kahneman et al. suggest that pain ratings are based on a combination of peak pain and final pain. Similarly, people rate a happy life that ends suddenly as being better than one with additional years of mild happiness (Diener, Wirtz, & Oishi, 2001), even though the former objectively consists of less pleasure than the latter. Applying these concepts to material goods, we investigated the impact of positivity and timing on the retrospective evaluations of material goods. We found strong evidence that the peak-end rule applies to both material goods and pain. PMID:18605486

  1. Saving Power at Peak Hours (LBNL Science at the Theater)

    ScienceCinema

    Piette, Mary Ann

    2011-04-28

    California needs new, responsive, demand-side energy technologies to ensure that periods of tight electricity supply on the grid don't turn into power outages. Led by Berkeley Lab's Mary Ann Piette, the California Energy Commission (through its Public Interest Energy Research Program) has established a Demand Response Research Center that addresses two motivations for adopting demand responsiveness: reducing average electricity prices and preventing future electricity crises. The research seeks to understand factors that influence "what works" in Demand Response. Piette's team is investigating the two types of demand response, load response and price response, that may influence and reduce the use of peak electric power through automated controls, peak pricing, advanced communications, and other strategies.

  2. Systems and Methods for Peak-Seeking Control

    NASA Technical Reports Server (NTRS)

    Ryan, John J (Inventor); Speyer, Jason L (Inventor)

    2013-01-01

    A computerized system and method for peak-seeking-control that uses a unique Kalman filter design to optimize a control loop, in real time, to either maximize or minimize a performance function of a physical object ("plant"). The system and method achieves more accurate and efficient peak-seeking-control by using a time-varying Kalman filter to estimate both the performance function gradient (slope) and Hessian (curvature) based on direct position measurements of the plant, and does not rely upon modeling the plant response to persistent excitation. The system and method can be naturally applied in various applications in which plant performance functions have multiple independent parameters, and it does not depend upon frequency separation to distinguish between system dimensions.

  3. The latitudinal gradient of the NO peak density

    NASA Technical Reports Server (NTRS)

    Fesen, C. G.; Rusch, D. W.; Gerard, J.-C.

    1990-01-01

    Results are presented from SME observations of the latitudinal gradients of peak NO densities at about 110-km altitude during the solstice and equinox periods from 1982 through 1985. It is shown that the response of the peak NO densities to the declining level of solar activity varies with latitude, with the polar regions exhibiting low sensitivity and the low-latitude regions responding strongly. The SME data also revealed marked asymmetries in the latitudinal structure of the two hemispheres for each season and considerable day-to-day variations in the NO densities. The solar cycle minimum data for June were simulated using a two-dimensional model; results of sensitivity studies performed with varied quenching rate and eddy diffusion coefficient are presented.

  4. Peak athletic performance and ageing: evidence from baseball.

    PubMed

    Bradbury, John Charles

    2009-04-01

    Baseball players exhibit a pattern of improvement and decline in performance; however, differing lengths of careers and changes in rules and characteristics of the game complicate assessments of age-related effects on performance. This study attempts to isolate the impact of age on several player skills while controlling for relevant outside factors using longitudinal data from 86 seasons of Major League Baseball. The results indicate that players age in different skills in accord with studies of ageing in other athletic contests. For overall performance, multiple-regression estimates indicate that hitters and pitchers peak around the age of 29 - later than previous estimates. Athletic skills such as hitting and running peak earlier than skills that rely heavily on experience and knowledge, such as issuing and drawing walks. PMID:19308873

  5. Discrete Ordinates Solutions for Highly Forward Peaked Scattering

    SciTech Connect

    Sanchez, Richard; McCormick, Norman J.

    2004-07-15

    The limitations of asymptotic methods for numerically solving highly forward peaked scattering (HFPS) problems are reviewed before resorting to a discrete ordinates solution for such problems based on biased angular quadrature formulas to increase the precision of the angular representation and on source evaluation from cell-averaged angular fluxes to reduce memory requirements. Also, a twice-collided source is introduced to avoid numerical representation of singularities in the solution. As an example the propagation and spreading of a collimated particle beam in an HFPS medium has been calculated with a discrete ordinates diamond-differenced numerical solution of the transport equation in two-dimensional curvilinear cylindrical coordinates. The calculation was carried out for a strongly forward peaked Henyey-Greenstein scattering law for which Fokker-Planck asymptotic models are not valid. The results show promise for numerically calculated reference solutions based on accurate spatial representations for checking the accuracy of standard asymptotic models for these types of problems.

  6. Evaluation of peak cough flow in Brazilian healthy adults

    PubMed Central

    2012-01-01

    Introduction In this study we aimed to evaluate the peak cough flow (PCF) in healthy Brazilian subjects. Methods We evaluated 484 healthy subjects between 18 and 40 years old. Subjects were seated and oriented were asked to perform a maximal inspiration followed by a quick, short and explosive expiration on the peak flow meter. Three measures were carried out and recorded the average of the three results for each individual. Results The PCF values ranged between 240 and 500 L/min. The PCF values were lower in females than in males. The PCF was inversely proportional to age. Conclusion The values for Brazilian adult healthy subjects regarding PCF were between 240 and 500 L/min. PMID:23021434

  7. In vivo dissolution measurement with indium-111 summation peak ratios

    SciTech Connect

    Jay, M.; Woodward, M.A.; Brouwer, K.R.

    1985-10-01

    Dissolution of (/sup 111/In)labeled tablets was measured in vivo in a totally noninvasive manner by using a modification of the perturbed angular correlation technique known as the summation peak ratio method. This method, which requires the incorporation of only 10-12 microCi into the dosage form, provided reliable dissolution data after oral administration of (/sup 111/In)lactose tablets. These results were supported by in vitro experiments which demonstrated that the dissolution rate as measured by the summation peak ratio method was in close agreement with the dissolution rate of salicylic acid in a (/sup 111/In)salicylic acid tablet. The method has the advantages of using only one detector, thereby avoiding the need for complex coincidence counting systems, requiring less radioactivity, and being potentially applicable to a gamma camera imaging system.

  8. Molten salt thermal energy storage for utility peaking loads

    NASA Technical Reports Server (NTRS)

    Ferrara, A.; Haslett, R.; Joyce, J.

    1977-01-01

    This paper considers the use of thermal energy storage (TES) in molten salts to increase the capacity of power plants. Five existing fossil and nuclear electric utility plants were selected as representative of current technology. A review of system load diagrams indicated that TES to meet loads over 95% of peak was a reasonable goal. Alternate TES heat exchanger locations were evaluated, showing that the stored energy should be used either for feedwater heating or to generate steam for an auxiliary power cycle. Specific salts for each concept are recommended. Design layouts were prepared for one plant, and it was shown that a TES tube/shell heat exchanger system could provide about 7% peaking capability at lower cost than adding steam generation capacity. Promising alternate heat exchanger concepts were also identified.

  9. Effect of poloidal asymmetries on impurity peaking in tokamaks

    SciTech Connect

    Mollen, A.; Pusztai, I.; Fueloep, T.; Kazakov, Ye. O.; Moradi, S.

    2012-05-15

    Poloidal impurity asymmetries are frequently observed in tokamaks. In this paper, the effect of poloidal asymmetry on electrostatic turbulent transport is studied, including the effect of the E Multiplication-Sign B drift. Collisions are modeled by a Lorentz operator, and the gyrokinetic equation is solved with a variational approach. The impurity transport is shown to be sensitive to the magnetic shear and changes sign for s Greater-Than-Or-Equivalent-To 0.5 in the presence of inboard accumulation. The zero-flux impurity density gradient (peaking factor) is shown to be rather insensitive to collisions in both ion temperature gradient and trapped electron mode driven cases. Our results suggest that the asymmetry (both the location of its maximum and its strength) and the magnetic shear are the two most important parameters that affect the impurity peaking.

  10. Simulation of Peak Flows Using Remote Sensing Systems

    NASA Astrophysics Data System (ADS)

    Magaña Hernández, F.; Ba, K. M.; Guerra-Cobián, V.

    2013-05-01

    In this study we utilized remotely sensed data (radar and satellite precipitation products) to simulate the peak discharges of some storm events of the Escondido River. This is a poorly gauged watershed located in Northern Mexico, in the State of Coahuila and is a sub-basin of Rio Bravo, known also as Río Grande. The radar data are from NOAA (Radar KDFX located in Laughlin Air Force Base, Texas). We used two satellite product estimates PERSIANN and CMORPH. These three estimated precipitation products have been compared using the hydrologic model HEC-HMS to simulate the peak discharge. The results of the simulations show the importance of the use of this type of data in hydrologic modeling.

  11. Altitude variations of the peak auroral emissions within auroral structures

    NASA Astrophysics Data System (ADS)

    Sangalli, L.; Partamies, N.; Gustavsson, B.

    2014-12-01

    The MIRACLE network monitors auroral activity in the Fennoscandian sector of Europe. Network stations cover the range of 55° to 57° magnetic latitude North and span two hours in magnetic local time. Some of the MIRACLE network stations include digital all-sky cameras (ASC) with overlapping field-of-views located at the latitude aurora occurs. The ASCs in this network operate at three different wavelengths: 427.8 nm (blue line), 557.7 nm (green line) and 630.0 nm (red line). These wavelengths are selected using narrow band filters. The new ASC systems are based on electron multiplying CCDs (emCCD), which allow higher time and spatial resolutions. The peak auroral emission altitude is determined using two ASC images from a station pair. Different auroral events are used to evaluate the altitude variations of the peak auroral emissions within auroral structures and its evolution in time.

  12. Altitude Variations of the Peak Auroral Emissions within Auroral Structures

    NASA Astrophysics Data System (ADS)

    Sangalli, L.

    2015-12-01

    The MIRACLE network monitors auroral activity in the Fennoscandian sector of Europe. Network stations cover the range of 55° to 57° magnetic latitude North and span two hours in magnetic local time. Some of the MIRACLE network stations include digital all-sky cameras (ASC) with overlapping field-of-views located at the latitude aurora occurs. The ASCs in this network operate at three different wavelengths: 427.8 nm (blue line), 557.7 nm (green line) and 630.0 nm (red line). These wavelengths are selected using narrow band filters. The new ASC systems are based on electron multiplying CCDs (emCCD), which allow higher time and spatial resolutions. The peak auroral emission altitude is determined using two ASC images from a station pair. Different auroral events are used to evaluate the altitude variations of the peak auroral emissions within auroral structures and its evolution in time.

  13. Kinematic evidence for downdip movement on the Mormon Peak detachment

    NASA Astrophysics Data System (ADS)

    Walker, Christopher D.; Anders, Mark H.; Christie-Blick, Nicholas

    2007-03-01

    The Mormon Peak detachment is considered to be one of the best examples of a rooted upper crustal detachment fault that propagated through the brittle crust at a low angle. The hanging wall of the detachment today consists of a number of isolated blocks that have been interpreted as remnants of a once-contiguous extensional allochthon. Here we present the results of a new study of directional indicators from the basal surfaces beneath these blocks. These measurements do not agree with the long-standing interpretation of a S75°W movement direction for the detachment hanging wall. Instead, the most recent movement on each section of the detachment took place approximately parallel to the present downdip direction. We conclude that the Mormon Peak detachment is best explained as the basal surfaces to a series of rootless gravity slides.

  14. Probing Cosmology with Weak Lensing Peak Counts and Minkowski Functionals

    NASA Astrophysics Data System (ADS)

    Kratochvil, Jan Michael; Wang, S.; Lim, E. A.; Haiman, Z.; May, M.

    2010-05-01

    The new method of counting peaks in weak lensing (WL) maps, as a function of their height, to probe models of dark energy and to constrain cosmological parameters offers advantages over similar, more traditional statistics like cluster counts: Because peaks can be identified in two-dimensional WL maps directly, they can provide constraints which are free from potential selection effects and biases involved in identifying and determining the masses of galaxy clusters. Our pilot study (Kratochvil, Haiman, May 2009), where we investigated three cosmological models with different constant values of the dark energy equation of state parameter w=-0.8, w=-1, w=-1.2 and with a fixed normalization of the primordial power spectrum, revealed a parameter sensitivity of w which warrants a numerically very costly in-depth study when marginalization over other uncertain cosmological parameters is included. Towards that goal, we present recent results from a new, extensive simulation suite of ninety 5123-particle N-body simulations, run on New York Blue at BNL, allowing us to vary several cosmological parameters individually and yielding vastly improved statistics. Studies have shown that weak lensing maps likely contain as much information in the nonlinear regime as in the linear one. While being a powerful probe of the nonlinear regime, weak lensing peak counts capture by definition only a subset of the total available information in the convergence maps. In particular, we found that relatively low-amplitude peaks account for most of the parameter sensitivity detected, hinting to a more complicated structure. Therefore, we extend our work by probing the morphology of the maps with Minkowski functionals, in our quest to extract the most possible information from the nonlinear aspects of large-scale structure formation.

  15. Density peaking and turbulent pinch in DIII-D discharges

    SciTech Connect

    Estrada-Mila, C.; Candy, J.; Waltz, R. E.

    2006-07-15

    A study of density peaking and particle flow in low confinement (L-mode) DIII-D discharges [G. R. McKee, C. C. Petty, R. E. Waltz et al., Nucl. Fusion 41, 1235 (2001)], using global gyrokinetic simulations, is presented. It is found that under experimental conditions, in particular when realistic collisionality is included, a turbulent pinch driven by electron temperature and density gradients can occur.

  16. The Origin of the Monochromatic Photoemission Peak in Diamondoid Monolayers

    SciTech Connect

    Clay, William A.; Liu, Zhi; Yang, Wanli; Fabbri, Jason D.; Dahl, Jeremy E.; Carlson, Robert M.K.; Sun, Steven; Pianetta, Piero A.; Melosh, Nicholas; Shen, Zhi-Xun; /Stanford U., Geballe Lab. /LBNL, ALS /Chevron Petroleum Tech., Richmond /SLAC, SSRL

    2008-10-31

    Recent photoemission experiments have discovered a highly monochromatized secondary electron peak emitted from diamondoid self-assembled monolayers on metal substrates. New experimental data and simulation results are presented to show that a combination of negative electron affinity and strong electron-phonon scattering is responsible for this behavior. The simulation results are generated using a simple Monte Carlo transport algorithm. The simulated spectra contain the main spectral features of the measured ones.

  17. Sustained Fixation Induced Changes in Phoria and Convergence Peak Velocity

    PubMed Central

    Kim, Eun H.; Vicci, Vincent R.; Han, Sang J.; Alvarez, Tara L.

    2011-01-01

    Purpose This study sought to investigate the influence of phoria adaptation on convergence peak velocity from responses located at different initial vergence positions. Methods Symmetrical 4° convergence step responses and near dissociated phoria (measured at 40 cm from the subject's midline) were recorded from six subjects with normal binocular vision using an infrared limbus tracking system with a haploscope. Two different sustained fixations (1° and 16° convergent rotation along the subject's midline) were used to study whether phoria had an influence on the peak velocity of convergence responses located at two initial vergence positions (1° or ‘far’ steps and 12° or ‘near’ steps). Results Phoria was significantly adapted after a sustained fixation task at near (16°) and far (1°) (p<0.002). A repeated measures ANOVA showed that convergence far steps were significantly faster than the near steps (p<0.03). When comparing convergence steps with the same initial vergence position, steps measured after near phoria adaptation were faster than responses after far adaptation (p<0.02). A regression analysis demonstrated that the change in phoria and the change in convergence peak velocity were significantly correlated for the far convergence steps (r = 0.97, p = 0.001). A weaker correlation was observed for the near convergence steps (r = 0.59, p = 0.20). Conclusion As a result of sustained fixation, phoria was adapted and the peak velocity of the near and far convergence steps was modified. This study has clinical considerations since prisms, which evoke phoria adaptation, can be prescribed to help alleviate visual discomfort. Future investigations should include a systematic study of how prisms may influence convergence and divergence eye movements for those prescribed with prisms within their spectacles. PMID:21698110

  18. Peak Oil and Energy Independence: Myth and Reality

    NASA Astrophysics Data System (ADS)

    Murray, James W.; Hansen, Jim

    2013-07-01

    Despite the recent uptick in production of natural gas and liquid fuels in the United States, increasing energy resource scarcity and reliance on unconventional fossil fuel sources will make energy independence for the nation very unlikely. Rather, geologists, economists, environmentalists, and resource managers are looking with interest at when the use of fossil fuels is expected to peak—will that occurrence be driven by the market or by supply? What level will emissions reach before this peak is reached?

  19. Estimating peak discharges of small, rural streams in Massachusetts

    USGS Publications Warehouse

    Wandle, S. William

    1983-01-01

    Floodflows on natural-flow streams in Massachusetts with drainage areas between 0.25 square miles and 260 square miles may be estimated from drainage area, main-channel slope, mean basin elevation, and the area of swamps, lakes, and ponds. Multiple-regression techniques were used to define the relationship between a suite of basin and climatic characteristics and flood peaks in three flood-frequency regions at a total of 95 sites. Station flood-frequency data were computed following guidelines in Bulletin 17A of the U.S. Water Resources Council. The frequency analyses are based upon weighted skew values, adjustments for high and low outliers, and historic peak data. Regression equations for estimation of peak discharges for 0.5, 0.2, 0.1, 0.04, 0.02, and 0.01 exceedance probabilities are provided for ungaged sites. An improved sample of flood peaks and gaging stations and the definition of three flood-frequency regions reduced the standard errors of estimate by about 5 percent over those for the 1977 relations. Included in this analysis were the synthetic flood-frequency data at 8 sites computed using historic climatic data and 10 parameters optimized by calibration of the U.S. Geological Survey's rainfall-runoff model with storm data observed over 11 years. The equations are applicable to streams unaffected by regulation where the usable manmade storage is less than 4.5 million cubic feet per square mile, or by diversions or urbanization. The equations are restricted to sites where the basin indices are within a specified range outside of eastern Plymouth, Barnstable, Dukes, or Nantucket Counties. In these areas, the available data do not adequately define the influence of high infiltration and storage capacities of drainage basins on floodflows.

  20. An integrable shallow water equation with peaked solitons

    SciTech Connect

    Camassa, R.; Holm, D.D. )

    1993-09-13

    We derive a new completely integrable dispersive shallow water equation that is bi-Hamiltonian and thus possesses an infinite number of conservation laws in involution. The equation is obtained by using an asymptotic expansion directly in the Hamiltonian for Euler's equations in the shallow water regime. The soliton solution for this equation has a limiting form that has a discontinuity in the first derivative at its peak.

  1. Degradation of the Bragg peak due to inhomogeneities.

    PubMed

    Urie, M; Goitein, M; Holley, W R; Chen, G T

    1986-01-01

    The rapid fall-off of dose at the end of range of heavy charged particle beams has the potential in therapeutic applications of sparing critical structures just distal to the target volume. Here we explored the effects of highly inhomogeneous regions on this desirable depth-dose characteristic. The proton depth-dose distribution behind a lucite-air interface parallel to the beam was bimodal, indicating the presence of two groups of protons with different residual ranges, creating a step-like depth-dose distribution at the end of range. The residual ranges became more spread out as the interface was angled at 3 degrees, and still more at 6 degrees, to the direction of the beam. A second experiment showed little significant effect on the distal depth-dose of protons having passed through a mosaic of teflon and lucite. Anatomic studies demonstrated significant effects of complex fine inhomogeneities on the end of range characteristics. Monoenergetic protons passing through the petrous ridges and mastoid air cells in the base of skull showed a dramatic degradation of the distal Bragg peak. In beams with spread out Bragg peaks passing through regions of the base of skull, the distal fall-off from 90 to 20% dose was increased from its nominal 6 to well over 32 mm. Heavy ions showed a corresponding degradation in their ends of range. In the worst case in the base of skull region, a monoenergetic neon beam showed a broadening of the full width at half maximum of the Bragg peak to over 15 mm (compared with 4 mm in a homogeneous unit density medium). A similar effect was found with carbon ions in the abdomen, where the full width at half maximum of the Bragg peak (nominally 5.5 mm) was found to be greater than 25 mm behind gas-soft-tissue interfaces. We address the implications of these data for dose computation with heavy charged particles. PMID:3952143

  2. PeakForce Tapping resolves individual microvilli on living cells.

    PubMed

    Schillers, Hermann; Medalsy, Izhar; Hu, Shuiqing; Slade, Andrea L; Shaw, James E

    2016-02-01

    Microvilli are a common structure found on epithelial cells that increase the apical surface thus enhancing the transmembrane transport capacity and also serve as one of the cell's mechanosensors. These structures are composed of microfilaments and cytoplasm, covered by plasma membrane. Epithelial cell function is usually coupled to the density of microvilli and its individual size illustrated by diseases, in which microvilli degradation causes malabsorption and diarrhea. Atomic force microscopy (AFM) has been widely used to study the topography and morphology of living cells. Visualizing soft and flexible structures such as microvilli on the apical surface of a live cell has been very challenging because the native microvilli structures are displaced and deformed by the interaction with the probe. PeakForce Tapping® is an AFM imaging mode, which allows reducing tip-sample interactions in time (microseconds) and controlling force in the low pico-Newton range. Data acquisition of this mode was optimized by using a newly developed PeakForce QNM-Live Cell probe, having a short cantilever with a 17-µm-long tip that minimizes hydrodynamic effects between the cantilever and the sample surface. In this paper, we have demonstrated for the first time the visualization of the microvilli on living kidney cells with AFM using PeakForce Tapping. The structures observed display a force dependence representing either the whole microvilli or just the tips of the microvilli layer. Together, PeakForce Tapping allows force control in the low pico-Newton range and enables the visualization of very soft and flexible structures on living cells under physiological conditions. PMID:26414320

  3. R-peaks detection based on stationary wavelet transform.

    PubMed

    Merah, M; Abdelmalik, T A; Larbi, B H

    2015-10-01

    Automatic detection of the QRS complexes/R-peaks in an electrocardiogram (ECG) signal is the most important step preceding any kind of ECG processing and analysis. The performance of these systems heavily relies on the accuracy of the QRS detector. The objective of present work is to drive a new robust method based on stationary wavelet transform (SWT) for R-peaks detection. The decimation of the coefficients at each level of the transformation algorithm is omitted, more samples in the coefficient sequences are available and hence a better outlier detection can be performed. Using the information of local maxima, minima and zero crossings of the fourth SWT coefficient detail, the proposed algorithm identifies the significant points for detection and delineation of the QRS complexes, as well as detection and identification of the QRS individual waves peaks of the pre-processed ECG signal. Various experimental results show that the proposed algorithm exhibits reliable QRS detection as well as accurate ECG delineation, achieving excellent performance on different databases, on the MIT-BIH database (Se=99.84%, P=99.88%), on the QT Database (Se=99.94%, P=99.89%) and on MIT-BIH Noise Stress Test Database, (Se=95.30%, P=93.98%). Reliability and accuracy are close to the highest among the ones obtained in other studies. Experiments results being satisfactory, the SWT may represent a novel QRS detection tool, for a robust ECG signal analysis. PMID:26105724

  4. High peak power diode stacks for high energy lasers

    NASA Astrophysics Data System (ADS)

    Negoita, Viorel C.; Vethake, Thilo; Jiang, John; Roff, Robert; Shih, Ming; Duck, Richard; Bauer, Marc; Mite, Roberto; Boucke, Konstantin; Treusch, Georg

    2015-02-01

    High energy solid state lasers are being developed for fusion experiments and other research applications where high energy per pulse is required but the repetition rate is rather low, around 10Hz. We report our results on high peak power diode laser stacks used as optical pumps for these lasers. The stacks are based on 10 mm bars with 4 mm cavity length and 55% fill factor, with peak power exceeding 500 W per bar. These bars are stacked and mounted on a cooler which provides backside cooling and electrical insulation. Currently we mount 25 bars per cooler for a nominal peak power of 12.5 kW, but in principle the mounting scheme can be scaled to a different number of devices depending on the application. Pretesting of these bars before soldering on the cooler enables us to select devices with similar wavelength and thus we maintain tight control of the spectral width (FWHM less than 6 nm). Fine adjustments of the centroid wavelength can be done by means of temperature of the cooling fluid or bias current. The available wavelength range spans from 880 nm to 1000 nm, and the wavelength of the entire assembly of stacks can be controlled to within 0.5 nm of the target value, which makes these stacks suitable for pumping a variety of gain media. The devices are fast axis collimated, with over 95% power being collimated in 6 mrad (full angle). The slow axis divergence is 9° (full angle) for 95% power content.

  5. Predictors of the peak width for networks with exponential links

    USGS Publications Warehouse

    Troutman, B.M.; Karlinger, M.R.

    1989-01-01

    We investigate optimal predictors of the peak (S) and distance to peak (T) of the width function of drainage networks under the assumption that the networks are topologically random with independent and exponentially distributed link lengths. Analytical results are derived using the fact that, under these assumptions, the width function is a homogeneous Markov birth-death process. In particular, exact expressions are derived for the asymptotic conditional expectations of S and T given network magnitude N and given mainstream length H. In addition, a simulation study is performed to examine various predictors of S and T, including N, H, and basin morphometric properties; non-asymptotic conditional expectations and variances are estimated. The best single predictor of S is N, of T is H, and of the scaled peak (S divided by the area under the width function) is H. Finally, expressions tested on a set of drainage basins from the state of Wyoming perform reasonably well in predicting S and T despite probable violations of the original assumptions. ?? 1989 Springer-Verlag.

  6. SLR data screening; location of peak of data distribution

    NASA Technical Reports Server (NTRS)

    Sinclair, Andrew T.

    1993-01-01

    At the 5th Laser Ranging Instrumentation Workshop held at Herstmonceux in 1984, consideration was given to the formation of on-site normal points by laser stations, and an algorithm was formulated. The algorithm included a recommendation that an iterated 3.0 x rms rejection criterion should be used to screen the data, and that arithmetic means should be formed within the normal point bins of the retained data. From Sept. 1990 onwards, this algorithm and screening criterion have been brought into effect by various laser stations for forming on-site normal points, and small variants of the algorithm are used by most analysis centers for forming normal points from full-rate data, although the data screening criterion they use ranges from about 2.5 to 3.0 x rms. At the CSTG Satellite Laser Ranging (SLR) Subcommission, a working group was set up in Mar. 1991 to review the recommended screening procedure. This paper has been influenced by the discussions of this working group, although the views expressed are primarily those of this author. The main thrust of this paper is that, particularly for single photon systems, a more important issue than data screening is the determination of the peak of a data distribution and hence, the determination of the bias of the peak from the mean. Several methods of determining the peak are discussed.

  7. Differences in peak bone density between male and female students.

    PubMed

    Avdagić, Selma Cvijetić; Barić, Irena Colić; Keser, Irena; Cecić, Ivana; Satalić, Zvonimir; Bobić, Jasminka; Gomzi, Milica

    2009-03-01

    As an important determinant of osteoporotic fracture risk, peak bone density tends to be higher in men than in women. The aim of this study was to see whether young men and women differed in the time and skeletal region of peak bone density. We also investigated the influence of diet and physical activity on bone mass. The study group included 51 male and 75 female students aged 19 to 25 years. Bone mineral density was measured for the spine, total femur, and the distal third of the radius using dual energy x-ray absorptiometry. Dietary data were obtained using a specially designed semiquantitative food frequency questionnaire. Bone mineral density (BMD; g cm(-2)) was higher in boys than in girls at all measured sites, while bone mineral apparent density (BMAD; g cm(-3)) was higher in girls. Age negatively correlated with bone mineral density in all measured sites except in the boys' spine. Sodium, protein, and fibres were nutrients that significantly correlated with bone mineral density. The study suggests that boys achieve peak bone density later than girls, and that this delay is the most prominent in the spine. In our study group, this difference could not be explained by different nutrition or the level of physical activity. PMID:19329379

  8. The locations of halo formation and the peaks formalism

    NASA Astrophysics Data System (ADS)

    Hahn, Oliver; Paranjape, Aseem

    2014-02-01

    We investigate the problem of predicting the halo mass function from the properties of the Lagrangian density field. We focus on a perturbation spectrum with a small-scale cut-off (as in warm dark matter cosmologies). This cut-off results in a strong suppression of low-mass objects, providing additional leverage to rigorously test which perturbations collapse and to what mass. We find that all haloes are consistent with forming near peaks of the initial density field, with a strong correlation between protohalo density and ellipticity. We demonstrate that, while standard excursion set theory with correlated steps completely fails to reproduce the mass function, the inclusion of the peaks constraint leads to the correct number of haloes but significantly underpredicts the masses of low-mass objects (with the predicted halo mass function at low masses behaving like dn/d ln m ˜ m2/3). This prediction is very robust and cannot be easily altered within the framework of a single collapse barrier. The nature of collapse in the presence of a small-scale cut-off thus reveals that excursion set calculations require a more detailed understanding of the collapse-time of a general ellipsoidal perturbation to predict the ultimate collapsed mass of a peak - a problem that has been hidden in the large abundance of small-scale structure in cold dark matter. We demonstrate how this problem can be resolved within the excursion set framework.

  9. Nonequilibrium electron dynamics: Formation of the quasiparticle peak

    NASA Astrophysics Data System (ADS)

    Sayyad, Sharareh; Eckstein, Martin

    We characterize how the narrow quasiparticle band of the one-band Hubbard model forms out of a bad metallic state in a time-dependent metal-insulator transition, using nonequilibrium slave-rotor dynamical mean field theory. Our results exhibit a nontrivial electronic timescale which is much longer than the width of the quasiparticle peak itself. To study this timescale, we perform a fast ramp from the insulating phase into the metallic region of the phase diagram, resulting in a highly excited state, and study the equilibration of the system with a weakly coupled phononic bath. The slow relaxation behavior is explained by surveilling the interplay between spinon and rotor degrees of freedom. Since the system is initially prepared in an insulating phase, the quasi-particle peak emerges when spinons catch up the metal-insulator crossover region, which is reached earlier by the rotor. At this point, spinon and rotor become weakly coupled, and the resulting very slow equilibration of the spinon is a bottleneck for the dynamics. After the birth of the quasiparticle peak, its height enhances by the construction of the low-energy spectrum of the rotor, which then lacks behind the relaxation of the spinon.

  10. Three-peak GRBs and their implications for central engines

    NASA Astrophysics Data System (ADS)

    Moreno Méndez, Enrique; Fraija, Nissim; Patricelli, Barbara

    2015-11-01

    GRB 110709B presented a peculiar three-peak lightcurve; this burst twice triggered the BAT detector onboard Swift. The two triggers were separated by ∼10 min. In order to explain such an event, we unify into a single description the millisecond (ms) protomagnetar and the collapsar central-engine models. We find that such a scenario could produce GRBs with three peaks. One for the ms-protomagnetar stage, a second one for the BH-formation event and a third one for the collapsar phase. We show that the three peaks for GRB 110709B originate from different phases of the same collapsing object. We estimate the energies and timescales of the different episodes of this burst using our model and compare with previous results as well as with a reanalysis we perform on the data. We show that not only the light curve, but also the photon index evolution and the delay between the prompt emission and the afterglow of the second central-engine activity phase point toward a model like the one proposed here. We find that, with reasonable assumptions, our model correctly describes the activity in GRB 110709B. We further suggest careful study of future GRBs lightcurves which may help show the validity of our model. If our model is correct, this would be the first time that the formation of a BH from a core-collapse event is observed unimpededly.

  11. Enhanced peak power CO2 laser processing of PCB materials

    NASA Astrophysics Data System (ADS)

    Moorhouse, C. J.; Villarreal, F.; Wendland, J. J.; Baker, H. J.; Hall, D. R.; Hand, D. P.

    2005-06-01

    Laser drilling has become a common processing step in the fabrication of printed circuit boards (PCB's). For this work, a recently developed enhanced peak power CO2 laser (~2.5 kW peak power, 200W average) or ultra-super pulse (USP) laser is used to drill alumina and copper coated dielectric laminate materials. The higher peak power and faster response times (than conventional CO2 lasers) produced by the USP laser are used to produce high speed alumina laser scribing and copper coated laminate microvia drilling processes. Alumina is a common PCB material used for applications, where its resistance to mechanical and thermal stresses is required. Here we present a comprehensive study of the melt eject mechanisms and recast formation to optimise the speed and quality of alumina laser scribing. Scribe speeds of up to 320 mms-1 (1.8 times current scribe rate) have been achieved using novel temporal pulse shapes unique to the USP laser. Also presented is the microvia drilling process of copper dielectric laminates, where the multi-level configuration presents different optical and thermal properties complicating their simultaneous laser ablation. In our experiments the USP laser has been used to drill standard thickness copper films (up to 50 μm thick) in a single shot. This investigation concentrates on understanding the mechanisms that determine the dielectric undercut dimensions.

  12. Phonon interpretation of the 'boson peak' in supercooled liquids.

    PubMed

    Grigera, T S; Martín-Mayor, V; Parisi, G; Verrocchio, P

    2003-03-20

    Glasses are amorphous solids, in the sense that they display elastic behaviour. In crystalline solids, elasticity is associated with phonons, which are quantized vibrational excitations. Phonon-like excitations also exist in glasses at very high (terahertz; 10(12) Hz) frequencies; surprisingly, these persist in the supercooled liquids. A universal feature of such amorphous systems is the boson peak: the vibrational density of states has an excess compared to the Debye squared-frequency law. Here we investigate the origin of this feature by studying the spectra of inherent structures (local minima of the potential energy) in a realistic glass model. We claim that the peak is the signature of a phase transition in the space of the stationary points of the energy, from a minima-dominated phase (with phonons) at low energy to a saddle-point-dominated phase (without phonons). The boson peak moves to lower frequencies on approaching the phonon-saddle transition, and its height diverges at the critical point. Our numerical results agree with the predictions of euclidean random matrix theory on the existence of a sharp phase transition between an amorphous elastic phase and a phonon-free one. PMID:12646916

  13. Deconvolution of mixed gamma emitters using peak parameters

    SciTech Connect

    Gadd, Milan S; Garcia, Francisco; Magadalena, Vigil M

    2011-01-14

    When evaluating samples containing mixtures of nuclides using gamma spectroscopy the situation sometimes arises where the nuclides present have photon emissions that cannot be resolved by the detector. An example of this is mixtures of {sup 241}Am and plutonium that have L x-ray emissions with slightly different energies which cannot be resolved using a high-purity germanium detector. It is possible to deconvolute the americium L x-rays from those plutonium based on the {sup 241}Am 59.54 keV photon. However, this requires accurate knowledge of the relative emission yields. Also, it often results in high uncertainties in the plutonium activity estimate due to the americium yields being approximately an order of magnitude greater than those for plutonium. In this work, an alternative method of determining the relative fraction of plutonium in mixtures of {sup 241}Am and {sup 239}Pu based on L x-ray peak location and shape parameters is investigated. The sensitivity and accuracy of the peak parameter method is compared to that for conventional peak decovolution.

  14. Potential effects of translatory waves on estimation of peak flows

    USGS Publications Warehouse

    Hjalmarson, H.W.; Phillips, J.V.

    1997-01-01

    During the afternoon of August 19, 1971, an intense thunderstorm a few miles southwest of Wikieup, Arizona, produced one of the largest known flood peaks for a 49.2-square-km drainage basin. Initial computations of the peak discharge assumed stable flow conditions and a four-section slope area measurement indicated that discharge was 2,082 m3/s. Recent findings based on free-surface instability characteristics at the site suggest that gravitational forces exceeded boundary retarding forces, and flow in the wide sand channel was unstable. Computations for roll or translatory waves indicate that waves crashed into the highway bridge at velocities of as much as 12.5 m/s. The close agreement of free surface instability results, translatory wave computations, estimates of the steady flow on which the translatory waves traveled, and an eyewitness account of the translatory waves suggest the total peak discharge could have been 2,742 m3/s or 32% greater than the published discharge. The occurrence of translatory waves in natural channels may be more common than previously thought, and instability criteria should be considered for hydraulic analysis of flow in steep smooth channels.

  15. Climate change and peak demand for electricity: Evaluating policies for reducing peak demand under different climate change scenarios

    NASA Astrophysics Data System (ADS)

    Anthony, Abigail Walker

    This research focuses on the relative advantages and disadvantages of using price-based and quantity-based controls for electricity markets. It also presents a detailed analysis of one specific approach to quantity based controls: the SmartAC program implemented in Stockton, California. Finally, the research forecasts electricity demand under various climate scenarios, and estimates potential cost savings that could result from a direct quantity control program over the next 50 years in each scenario. The traditional approach to dealing with the problem of peak demand for electricity is to invest in a large stock of excess capital that is rarely used, thereby greatly increasing production costs. Because this approach has proved so expensive, there has been a focus on identifying alternative approaches for dealing with peak demand problems. This research focuses on two approaches: price based approaches, such as real time pricing, and quantity based approaches, whereby the utility directly controls at least some elements of electricity used by consumers. This research suggests that well-designed policies for reducing peak demand might include both price and quantity controls. In theory, sufficiently high peak prices occurring during periods of peak demand and/or low supply can cause the quantity of electricity demanded to decline until demand is in balance with system capacity, potentially reducing the total amount of generation capacity needed to meet demand and helping meet electricity demand at the lowest cost. However, consumers need to be well informed about real-time prices for the pricing strategy to work as well as theory suggests. While this might be an appropriate assumption for large industrial and commercial users who have potentially large economic incentives, there is not yet enough research on whether households will fully understand and respond to real-time prices. Thus, while real-time pricing can be an effective tool for addressing the peak load

  16. Automated Critical Peak Pricing Field Tests: Program Descriptionand Results

    SciTech Connect

    Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Xu, Peng

    2006-04-06

    California utilities have been exploring the use of critical peak prices (CPP) to help reduce needle peaks in customer end-use loads. CPP is a form of price-responsive demand response (DR). Recent experience has shown that customers have limited knowledge of how to operate their facilities in order to reduce their electricity costs under CPP (Quantum 2004). While the lack of knowledge about how to develop and implement DR control strategies is a barrier to participation in DR programs like CPP, another barrier is the lack of automation of DR systems. During 2003 and 2004, the PIER Demand Response Research Center (DRRC) conducted a series of tests of fully automated electric demand response (Auto-DR) at 18 facilities. Overall, the average of the site-specific average coincident demand reductions was 8% from a variety of building types and facilities. Many electricity customers have suggested that automation will help them institutionalize their electric demand savings and improve their overall response and DR repeatability. This report focuses on and discusses the specific results of the Automated Critical Peak Pricing (Auto-CPP, a specific type of Auto-DR) tests that took place during 2005, which build on the automated demand response (Auto-DR) research conducted through PIER and the DRRC in 2003 and 2004. The long-term goal of this project is to understand the technical opportunities of automating demand response and to remove technical and market impediments to large-scale implementation of automated demand response (Auto-DR) in buildings and industry. A second goal of this research is to understand and identify best practices for DR strategies and opportunities. The specific objectives of the Automated Critical Peak Pricing test were as follows: (1) Demonstrate how an automated notification system for critical peak pricing can be used in large commercial facilities for demand response (DR). (2) Evaluate effectiveness of such a system. (3) Determine how customers

  17. Historisches Rätsel Physik mit Gewehr und Eiern

    NASA Astrophysics Data System (ADS)

    Loos, Andreas

    2003-11-01

    Es fing schon gut an: Mit zehn Jahren saß der begabte Junge bereits in der Universität, wo ihn kein Geringerer als sein Vater persönlich unterrichtete. Damit schlug dieser zwei Fliegen mit einer Klappe: Sein Sohn lernte etwas Gescheites, und er war zugleich in sicherer Obhut.

  18. Derived Equivalence Relations of Geometry Skills in Students with Autism: an Application of the PEAK-E Curriculum.

    PubMed

    Dixon, Mark R; Belisle, Jordan; Stanley, Caleb R; Daar, Jacob H; Williams, Leigh Anne

    2016-06-01

    The present study evaluated the efficacy of equivalence-based instruction (EBI) as described in the PEAK-E curriculum (Dixon, 2015) for promoting the emergence of derived geometry skills in two children with high-functioning autism. The results suggested that direct training of shape name (A) to shape property (B) (i.e., A-B relations) was effective for both participants. Following A-B training, both participants demonstrated emergent relations that are consistent with symmetry (B-A), as well as emergent shape name (A) to shape picture (C) relations that are consistent with transitivity (A-C). The results expand on existing literature by demonstrating the emergence of an A-C relation when neither A nor B stimuli were ever trained to C stimuli and illustrate the efficacy of EBI for training geometry skills. PMID:27606220

  19. Using energy peaks to measure new particle masses

    NASA Astrophysics Data System (ADS)

    Agashe, Kaustubh; Franceschini, Roberto; Kim, Doojin

    2014-11-01

    We discussed in arXiv:1209.0772 that the laboratory frame distribution of the energy of a massless particle from a two-body decay at a hadron collider has a peak whose location is identical to the value of this daughter's (fixed) energy in the rest frame of the corresponding mother particle. For that result to hold we assumed that the mother is unpolarized and has a generic boost distribution in the laboratory frame. In this work we discuss how this observation can be applied for determination of masses of new particles, with out requiring a full reconstruction of their decay chains or information about the rest of the event. We focus on a two-step cascade decay of a massive particle that has one invisible particle in the final state: C → Bb → Aab, where C, B and A are new particles of which A is invisible and a, b are visible particles. Combining the measurements of the peaks of energy distributions of a and b with that of the edge in their invariant mass distribution, we demonstrate that it is in principle possible to determine separately all three masses of the new particles, in particular, without using any measurement of missing transverse momentum. Furthermore, we show how the use of the peaks in an inclusive energy distribution is generically less affected (as compared to other mass measurement strategies) by combinatorial issues. For some simplified, yet interesting, scenarios we find that these combinatorial issues are absent altogether. As an example of this general strategy, we study SUSY models where gluino decays to an invisible lightest neutralino via an on-shell bottom squark. Taking into account the dominant backgrounds, we show how the mass of the bottom squark, the gluino and (for some class of spectra) that of the neutralino can be determined using this technique.

  20. Gestresste Haut? - Aktueller Stand molekularer psychosomatischer Zusammenhänge und ihr Beitrag zu Ursachen und Folgen dermatologischer Erkrankungen.

    PubMed

    Peters, Eva M J

    2016-03-01

    In den 70er Jahren des vergangenen Jahrhunderts wurde zum ersten Mal ein pathogenetisch relevanter Zusammenhang zwischen Stress, im Sinne von psychosozialem Stress, und Krankheit am Beispiel von viralen Erkrankungen der Schleimhäute (wie Rhinovirus-, Coxsackie-Infektion) nachgewiesen. Seither nehmen Publikationen, die diese Zusammenhänge bis auf die molekulare Ebene erforschen, jährlich zu. Dennoch sind die Evidenzen für einen Einfluss von psychosozialer Belastung auf chronisch-entzündliche Hauterkrankungen und auf Hauttumoren wenig bekannt. In diesem Beitrag fassen wir die aktuellen Erkenntnisse aus Epidemiologie, Psychoneuroimmunologie und molekularer Psychosomatik narrativ zusammen. Sie belegen die vielfältigen krankheitsrelevanten Interaktionen zwischen endokrinem System, Nervensystem und Immunsystem. Im Fokus stehen stressinduzierte Verschiebungen in der Immunbalance bei ausgewählten Erkrankungen wie Neurodermitis, Psoriasis oder malignem Melanom. Ziel dieses Beitrages ist die Vermittlung psychosomatischen Grundlagenwissens bei chronischen Dermatosen. Dies reicht von der Ätiologie über die Symptomatik bis zu den therapeutischen Optionen. Besonderes Augenmerk liegt dabei auf den zugrunde liegenden molekularen Zusammenhängen sowohl aus der somatopsychischen als auch aus der psychosomatischen Perspektive. PMID:26972186

  1. Measurement of peak discharge at width contractions by indirect methods

    USGS Publications Warehouse

    Matthai, Howard Frederick

    1967-01-01

    This chapter describes procedures for measuring peak discharges using open-channel width contractions. Field and office procedures limited to this method are described. The discharge equation based on the continuity and energy equations between an approach cross section and the contracted section under a bridge or contraction is given. Contractions are classified into four geometric types. Discharge coefficients and computation procedures are given with a complete facsimile example of computation of a contracted-opening measurement. Additional procedures are given for multiple-opening contractions.

  2. Methods and apparatus for reducing peak wind turbine loads

    DOEpatents

    Moroz, Emilian Mieczyslaw

    2007-02-13

    A method for reducing peak loads of wind turbines in a changing wind environment includes measuring or estimating an instantaneous wind speed and direction at the wind turbine and determining a yaw error of the wind turbine relative to the measured instantaneous wind direction. The method further includes comparing the yaw error to a yaw error trigger that has different values at different wind speeds and shutting down the wind turbine when the yaw error exceeds the yaw error trigger corresponding to the measured or estimated instantaneous wind speed.

  3. Peak-Seeking Control Using Gradient and Hessian Estimates

    NASA Technical Reports Server (NTRS)

    Ryan, John J.; Speyer, Jason L.

    2010-01-01

    A peak-seeking control method is presented which utilizes a linear time-varying Kalman filter. Performance function coordinate and magnitude measurements are used by the Kalman filter to estimate the gradient and Hessian of the performance function. The gradient and Hessian are used to command the system toward a local extremum. The method is naturally applied to multiple-input multiple-output systems. Applications of this technique to a single-input single-output example and a two-input one-output example are presented.

  4. Double passing the Kitt Peak 1-m Fourier transform spectrometer

    NASA Technical Reports Server (NTRS)

    Jennings, D. E.; Hubbard, R.; Brault, J. W.

    1985-01-01

    Attention is given to a simple technique for performing the conversion of the Kitt Peak 1-m Fourier transform spectrometer's dual input/output optical configuration to a double pass configuration that improves spectral resolution by a factor of 2. The modification is made by placing a flat mirror in the output beam from each cat's eye, retroreflecting the beams back through the cat's eyes to the first beam splitter. A single detector is placed at the second input port, which then becomes the instrument's output.

  5. Device level 3D characterization using PeakForce AFM

    NASA Astrophysics Data System (ADS)

    Timoney, Padraig; Zhang, Xiaoxiao; Vaid, Alok; Hand, Sean; Osborne, Jason; Milligan, Eric; Feinstein, Adam

    2016-03-01

    Traditional metrology solutions face a range of challenges at the 1X node such as three dimensional (3D) measurement capabilities, shrinking overlay and critical dimension (CD) error budgets driven by multi-patterning and via in trench CD measurements. With advent of advanced technology nodes and 3D processing, an increasing need is emerging for in-die metrology including across-structure and structure-to-structure characterization. A myriad of work has emerged in the past few years intending to address these challenges from various aspects; in-die OCD with reduced spot size and tilt beam on traditional critical dimension scanning electron microscopy (CDSEM) for height measurements. This paper explores the latest capability offered by PeakForceTM Tapping Atomic Force Microscopy (PFT-AFM). The use of traditional harmonic tapping mode for scanning high aspect ratio, and complex "3D" wafer structures, results in limited depth probing capability as well as excessive tip wear. These limitations arise due to the large tip-sample interaction volume in such confined spaces. PeakForce Tapping eliminates these limitations through direct real time control of the tip-sample interaction contact force. The ability of PeakForce to measure, and respond directly to tip- sample interaction forces results in more detailed feature resolution, reduced tip wear, and improved depth capability. In this work, the PFT-AFM tool was applied for multiple applications, including the 14nm fin and replacement metal gate (RMG) applications outlined below. Results from DOE wafers, detailed measurement precision studies and correlation to reference metrology are presented for validation of this methodology. With the fin application, precision of 0.3nm is demonstrated by measuring 5 dies with 10 consecutive runs. Capability to resolve within-die and localized within-macro height variation is also demonstrated. Results obtained from the fin measurements support the increasing trend that measurements

  6. Quasispecies theory for multiple-peak fitness landscapes

    NASA Astrophysics Data System (ADS)

    Saakian, David B.; Muñoz, E.; Hu, Chin-Kun; Deem, M. W.

    2006-04-01

    We use a path integral representation to solve the Eigen and Crow-Kimura molecular evolution models for the case of multiple fitness peaks with arbitrary fitness and degradation functions. In the general case, we find that the solution to these molecular evolution models can be written as the optimum of a fitness function, with constraints enforced by Lagrange multipliers and with a term accounting for the entropy of the spreading population in sequence space. The results for the Eigen model are applied to consider virus or cancer proliferation under the control of drugs or the immune system.

  7. Monolithic high peak-power coherent Doppler lidar system

    NASA Astrophysics Data System (ADS)

    Kotov, Leonid V.; Töws, Albert; Kurtz, Alfred; Bobkov, Konstantin K.; Aleshkina, Svetlana S.; Bubnov, Mikhail M.; Lipatov, Denis S.; Guryanov, Alexey N.; Likhachev, Mikhail

    2016-03-01

    In this work we present a monolithic lidar system, based on a newly-developed double-clad large mode area (LMA) polarization-maintaining Er-doped fiber and specially designed LMA passive components. Optimization of the fiber designs resulted in as high as 100 W of SBS limited peak power. The amplifier and its passive components (circulator and collimator) were integrated in an existing lidar system. The enhanced lidar system provides three times increase of scanning range compared to one based on standard telecom-grade amplifiers.

  8. Modelling and Analysis of High Pressure Peaking Switch

    NASA Astrophysics Data System (ADS)

    S, Bindu; Parekh, Mrunal; Mangalvedekar, H. A.; Sharma, Archana; Chakravarthy, D. P.

    2012-07-01

    This paper presents modelling and analysis of peaking switch used in Marx generator, such that the rise time of the pulse produced by the Marx generator is reduced substantially. Towards this FEMM (Finite Element Methods Magnetics) software is used for the field modelling of the switch and MATLAB for circuit modelling to observe the rise time. The switch has to produce pulse with sub-nanosecond rise time, hence the electrode distance has to be minimum. This switch can withstand high voltage only under high pressure. A mathematical model is simulated in MATLAB to see the performance under high pressure.

  9. Applications of probabilistic peak-shaving technique in generation planning

    SciTech Connect

    Malik, A.S.; Cory, B.J.; Wijayatunga, P.D.C.

    1999-11-01

    This paper presents two novel applications of probabilistic peak-shaving technique in generation planning, i.e., to simulate efficiently and accurately multiple limited-energy units probabilistically in equivalent load duration curve method and to simulate efficiently the candidate plants, whose different configurations are tested for finding the least-cost generation expansion planning solution. The applications of the technique are demonstrated with the help of two hand calculation examples. An efficient algorithm is also presented to simulate multiple limited-energy units probabilistically, for different hydrological conditions, in a generation mix of hydro-thermal units in probabilistic production costing framework.

  10. Peak nothing: recent trends in mineral resource production.

    PubMed

    Rustad, James R

    2012-02-01

    The Hubbert-type analysis used to analyze the production history of oil is applied here to other raw materials. Many resources commonly thought of as being close to "peaking" such as lithium, helium, copper, and the rare earth elements, show no evidence of logistic behavior at any point in their production histories. Although many resources have exhibited logistic behavior in the past, many now show exponential or superexponential growth. In most cases, the transition has occurred in the last ten to twenty years. PMID:22220496

  11. CLOUD PEAK PRIMITIVE AREA AND ADJACENT AREAS, WYOMING.

    USGS Publications Warehouse

    Kiilsgaard, Thor H.; Patten, Lowell L.

    1984-01-01

    The results of a mineral survey of the Cloud Peak Primitive Area and adjacent areas in Wyoming indicated little promise for the occurrence of mineral resources. There are some prospect workings, particularly in the northern part of the area, but in none of them were there indications that ore had been mined. Samples from the workings, from nearby rocks and sediments from streams that drain the area did not yield any metal values of significance. The crystalline rocks that underlie the area do not contain oil and gas or coal, products that are extracted from the younger rocks that underlie basins on both sides of the study area.

  12. X-ray photoelectron spectroscopy peak assignment for perfluoropolyether oils

    NASA Technical Reports Server (NTRS)

    Mori, Shigeyuki; Morales, Wilfredo

    1990-01-01

    Perfluoroalkylpolyether (PFPE) oils are increasingly being used as vacuum pump oils and as lubricants for magnetic recording media and instrumentation for satellites. In this paper, the relative binding energies of three PFPE oils are determined. When sample oils are continuously irradiated during X-ray spectroscopy (XPS) measurements, the relative peak intensity of the spectra is altered significantly, indicating that gaseous products form from the oils during XPS measurements. Thus, attention should be paid to chemical changes when XPE is used to characterize fluorinated carbons such as PFPE oils.

  13. An analytical method for predicting postwildfire peak discharges

    USGS Publications Warehouse

    Moody, John A.

    2012-01-01

    An analytical method presented here that predicts postwildfire peak discharge was developed from analysis of paired rainfall and runoff measurements collected from selected burned basins. Data were collected from 19 mountainous basins burned by eight wildfires in different hydroclimatic regimes in the western United States (California, Colorado, Nevada, New Mexico, and South Dakota). Most of the data were collected for the year of the wildfire and for 3 to 4 years after the wildfire. These data provide some estimate of the changes with time of postwildfire peak discharges, which are known to be transient but have received little documentation. The only required inputs for the analytical method are the burned area and a quantitative measure of soil burn severity (change in the normalized burn ratio), which is derived from Landsat reflectance data and is available from either the U.S. Department of Agriculture Forest Service or the U.S. Geological Survey. The method predicts the postwildfire peak discharge per unit burned area for the year of a wildfire, the first year after a wildfire, and the second year after a wildfire. It can be used at three levels of information depending on the data available to the user; each subsequent level requires either more data or more processing of the data. Level 1 requires only the burned area. Level 2 requires the burned area and the basin average value of the change in the normalized burn ratio. Level 3 requires the burned area and the calculation of the hydraulic functional connectivity, which is a variable that incorporates the sequence of soil burn severity along hillslope flow paths within the burned basin. Measurements indicate that the unit peak discharge response increases abruptly when the 30-minute maximum rainfall intensity is greater than about 5 millimeters per hour (0.2 inches per hour). This threshold may relate to a change in runoff generation from saturated-excess to infiltration-excess overland flow. The

  14. Peaks of solar cycles affect the gender ratio.

    PubMed

    Davis, George E; Lowell, Walter E

    2008-12-01

    In this study, we report that the gender ratio (GR) at death [where GR=(N(males)/N(males)+N(females))] of those born (and likely conceived) in solar cycle peaks (about a 3-year period occurring on average every approximately 11 years), is inversely related to mean male age at death; e.g., the higher the GR(at death) the lower the mean lifespan, while the GR(at death) of those born in non-peak years has no relation to mean male lifespan. Although changes in the GR are small and may be of little clinical significance, the GR is a sensitive indicator of environmental effects, and therefore is pertinent to epigenetics. This paper supports the hypothesis that solar radiation, probably in the ultraviolet spectrum, by some manner interacts with chromosomal DNA (genes) and produces the genetic variety that not only fosters adaptation, but also produces the diseases that reduce lifespan. This paper also proposes that sunlight is more effective in modifying genomes at the time of conception than later in gestation or infancy. Referring to the work of others, this study also reveals that geographic latitude also affects the GR, suggesting that the variation in light is probably as important as the intensity of light in modifying genomes. This study finds that men sustain more genetic variation, producing 28% more disease than women, as well as a 2% decrease in GR from birth to death, and a shorter life (in Maine) by 7 years. PMID:18755551

  15. Linearity between temperature peak and bioenergy CO2 emission rates

    NASA Astrophysics Data System (ADS)

    Cherubini, Francesco; Gasser, Thomas; Bright, Ryan M.; Ciais, Philippe; Strømman, Anders H.

    2014-11-01

    Many future energy and emission scenarios envisage an increase of bioenergy in the global primary energy mix. In most climate impact assessment models and policies, bioenergy systems are assumed to be carbon neutral, thus ignoring the time lag between CO2 emissions from biomass combustion and CO2 uptake by vegetation. Here, we show that the temperature peak caused by CO2 emissions from bioenergy is proportional to the maximum rate at which emissions occur and is almost insensitive to cumulative emissions. Whereas the carbon-climate response (CCR; ref. ) to fossil fuel emissions is approximately constant, the CCR to bioenergy emissions depends on time, biomass turnover times, and emission scenarios. The linearity between temperature peak and bioenergy CO2 emission rates resembles the characteristic of the temperature response to short-lived climate forcers. As for the latter, the timing of CO2 emissions from bioenergy matters. Under the international agreement to limit global warming to 2 °C by 2100, early emissions from bioenergy thus have smaller contributions on the targeted temperature than emissions postponed later into the future, especially when bioenergy is sourced from biomass with medium (50-60 years) or long turnover times (100 years).

  16. GRB physics and cosmology with peak energy-intensity correlations

    NASA Astrophysics Data System (ADS)

    Sawant, Disha; Amati, Lorenzo

    2015-12-01

    Gamma Ray Bursts (GRBs) are immensely energetic explosions radiating up to 1054 erg of energy isotropically (Eiso) and they are observed within a wide range of redshift (from ˜ 0.01 up to ˜ 9). Such enormous power and high redshift point at these phenomena being highly favorable to investigate the history and evolution of our universe. The major obstacle in their application as cosmological study-tools is to find a way to standardize the GRBs, for instance similar to SNe Ia. With respect to this goal, the correlation between spectral peak energy (Ep,i) and the "intensity" is a positively useful and investigated criterion. Moreover, it has been demonstrated that, through the Ep,i - Eiso correlation, the current data set of GRBs can already contribute to the independent evidence of the matter density ΩM being ˜ 0.3 for a flat universe scenario. We try to inspect and compare the correlations of Ep,i with different intensity indicators (e.g., radiated energy, average and peak luminosity, bolometric vs. monochromatic quantities, etc.) both in terms of intrinsic dispersion and precise estimation of ΩM. The outcome of such studies are further analyzed in verifying the reliability of the correlations for both GRB physics and their standardization for cosmology.

  17. GENETIC SIGNATURE OF ADAPTIVE PEAK SHIFT IN THREESPINE STICKLEBACK

    PubMed Central

    Rogers, Sean M.; Tamkee, Patrick; Summers, Brian; Balabahadra, Sarita; Marks, Melissa; Kingsley, David M.; Schluter, Dolph

    2015-01-01

    Transition of an evolving population to a new adaptive optimum is predicted to leave a signature in the distribution of effect sizes of fixed mutations. If they affect many traits (are pleiotropic), large effect mutations should contribute more when a population evolves to a farther adaptive peak than to a nearer peak. We tested this prediction in wild threespine stickleback fish (Gasterosteus aculeatus) by comparing the estimated frequency of large effect genetic changes underlying evolution as the same ancestor adapted to two lake types since the end of the ice age. A higher frequency of large effect genetic changes (quantitative trait loci) contributed to adaptive evolution in populations that adapted to lakes representing a more distant optimum than to lakes in which the optimum phenotype was nearer to the ancestral state. Our results also indicate that pleiotropy, not just optimum overshoot, contributes to this difference. These results suggest that a series of adaptive improvements to a new environment leaves a detectable mark in the genome of wild populations. Although not all assumptions of the theory are likely met in natural systems, the prediction may be robust enough to the complexities of natural environments to be useful when forecasting adaptive responses to large environmental changes. PMID:22834743

  18. Slope Morphology of Twin Peaks, Mars Pathfinder Landing Site

    NASA Astrophysics Data System (ADS)

    Hobbs, Steven; Paine, Colin; Clarke, Jon; Caprarelli, Graziella

    2010-05-01

    Development of slope form over time has long been a concern of geomorphologists, although recently this concern has been moved to slope processes rather than form. There are two basic approaches. The first is theoretical, involving modeling of different types and rates of processes, and calculation of results in terms of slope evolution over time. Comparisons with real-life slopes can follow this approach [1], [2]. The second, inductive, approach involves field measurements to test ideas about slope evolution starting from the assumption that observed slopes represent different stages of an essentially similar evolution [3]. Space is substituted for time, and a number of slopes, assumed to be of increasing age, are measured and placed in an evolutionary sequence (e.g. [4], [5], [6]). [5] showed that slope angles are modally distributed, with the modal angles controlled by the materials (regolith) of which the slopes are formed, and by the processes operating on them. Data can be obtained directly from field work or from digital elevation models (DEM) derived from remote sensing investigations [7]. DEMs are particularly useful to study inaccessible planets, such as Mars, where on site observations are restricted to only a few landing sites. Here we present a study of slopes on the Twin Peaks, two small hills located 780 m north and 910 m south of the Mars Pathfinder landing site at the mouth of the Ares and Tiu flood channels. The presence of streamlined hills, jumbled surfaces and conglomerates suggested the region was modified by massive flooding 1.8 - 3.5 billion years ago [8], [9]. The streamlined forms and terraces of the Twin Peaks were taken to indicate catastrophic flood conditions that were believed to be prevalent in the area [8]. It was also suggested that the northernmost peak was topped by floodwater, causing its flatter appearance. Other researchers postulated alternative geomorphological origins for the features observed at the Pathfinder landing site

  19. Peaking for optimal performance: Research limitations and future directions.

    PubMed

    Pyne, David B; Mujika, Iñigo; Reilly, Thomas

    2009-02-01

    A key element of the physical preparation of athletes is the taper period in the weeks immediately preceding competition. Existing research has defined the taper, identified various forms used in contemporary sport, and examined the prescription of training volume, load, intensity, duration, and type (progressive or step). Current limitations include: the lack of studies on team, combative, racquet, and precision (target) sports; the relatively small number of randomized controlled trials; the narrow focus on a single competition (single peak) compared with multiple peaking for weekly, multi-day or multiple events; and limited understanding of the physiological, neuromuscular, and biomechanical basis of the taper. Future research should address these limitations, together with the influence of prior training on optimal tapering strategies, and the interactions between the taper and long-haul travel, heat, and altitude. Practitioners seek information on how to prescribe tapers from season to season during an athlete's career, or a team's progression through a domestic league season, or multi-year Olympic or World Cup cycle. Practical guidelines for planning effective tapers for the Vancouver 2010 and London 2012 Olympics will evolve from both experimental investigations and modelling of successful tapers currently employed in a wide range of sports. PMID:19153861

  20. GRB physics and cosmology with peak energy-intensity correlations

    SciTech Connect

    Sawant, Disha; Amati, Lorenzo

    2015-12-17

    Gamma Ray Bursts (GRBs) are immensely energetic explosions radiating up to 10{sup 54} erg of energy isotropically (E{sub iso}) and they are observed within a wide range of redshift (from ∼ 0.01 up to ∼ 9). Such enormous power and high redshift point at these phenomena being highly favorable to investigate the history and evolution of our universe. The major obstacle in their application as cosmological study-tools is to find a way to standardize the GRBs, for instance similar to SNe Ia. With respect to this goal, the correlation between spectral peak energy (E{sub p,i}) and the “intensity” is a positively useful and investigated criterion. Moreover, it has been demonstrated that, through the E{sub p,i} – E{sub iso} correlation, the current data set of GRBs can already contribute to the independent evidence of the matter density Ω{sub M} being ∼ 0.3 for a flat universe scenario. We try to inspect and compare the correlations of E{sub p,i} with different intensity indicators (e.g., radiated energy, average and peak luminosity, bolometric vs. monochromatic quantities, etc.) both in terms of intrinsic dispersion and precise estimation of Ω{sub M}. The outcome of such studies are further analyzed in verifying the reliability of the correlations for both GRB physics and their standardization for cosmology.

  1. Turbulence Hazard Metric Based on Peak Accelerations for Jetliner Passengers

    NASA Technical Reports Server (NTRS)

    Stewart, Eric C.

    2005-01-01

    Calculations are made of the approximate hazard due to peak normal accelerations of an airplane flying through a simulated vertical wind field associated with a convective frontal system. The calculations are based on a hazard metric developed from a systematic application of a generic math model to 1-cosine discrete gusts of various amplitudes and gust lengths. The math model simulates the three degree-of- freedom longitudinal rigid body motion to vertical gusts and includes (1) fuselage flexibility, (2) the lag in the downwash from the wing to the tail, (3) gradual lift effects, (4) a simplified autopilot, and (5) motion of an unrestrained passenger in the rear cabin. Airplane and passenger response contours are calculated for a matrix of gust amplitudes and gust lengths. The airplane response contours are used to develop an approximate hazard metric of peak normal accelerations as a function of gust amplitude and gust length. The hazard metric is then applied to a two-dimensional simulated vertical wind field of a convective frontal system. The variations of the hazard metric with gust length and airplane heading are demonstrated.

  2. Estimating instantaneous peak flow from mean daily flow

    NASA Astrophysics Data System (ADS)

    Chen, B.; Krajewski, W. F.

    2015-12-01

    While instantaneous peak flow (IPF) records have historically been necessary for practical applications in flood risk management and hydraulic structure design, mean daily flow (MDF) values are often all that are available. To address this problem, we propose a simple method, which requires only MDF records as its input and uses the rising and falling slopes of daily hydrographs, to estimate IPFs. We applied this method to 144 catchments in Iowa, USA, with drainage areas ranging from about 7 to 220,000 km2. This application involves about 3800 peak flow events originating from different flood generation mechanisms over the period from 1997 to 2014. About 55% of the catchments have prediction errors within ±10%, and 85% of the catchments have predictions errors within ±20%. The method works well for catchments larger than 500 km2, poorly for catchments smaller than 100 km2, and fairly well for catchments in between these sizes. The reduction in the method's effectiveness with decreasing catchment size is due to the fact that the smaller the catchment, the more information is lost when using MDF to characterize the instantaneous flow processes. Our proposed method is simple and promising in terms of estimating IPFs from MDFs for areas where IPF records are unavailable or are insufficient.

  3. Global marine bacterial diversity peaks at high latitudes in winter

    PubMed Central

    Ladau, Joshua; Sharpton, Thomas J; Finucane, Mariel M; Jospin, Guillaume; Kembel, Steven W; O'Dwyer, James; Koeppel, Alexander F; Green, Jessica L; Pollard, Katherine S

    2013-01-01

    Genomic approaches to characterizing bacterial communities are revealing significant differences in diversity and composition between environments. But bacterial distributions have not been mapped at a global scale. Although current community surveys are way too sparse to map global diversity patterns directly, there is now sufficient data to fit accurate models of how bacterial distributions vary across different environments and to make global scale maps from these models. We apply this approach to map the global distributions of bacteria in marine surface waters. Our spatially and temporally explicit predictions suggest that bacterial diversity peaks in temperate latitudes across the world's oceans. These global peaks are seasonal, occurring 6 months apart in the two hemispheres, in the boreal and austral winters. This pattern is quite different from the tropical, seasonally consistent diversity patterns observed for most macroorganisms. However, like other marine organisms, surface water bacteria are particularly diverse in regions of high human environmental impacts on the oceans. Our maps provide the first picture of bacterial distributions at a global scale and suggest important differences between the diversity patterns of bacteria compared with other organisms. PMID:23514781

  4. RELIABILITY OF THE DETECTION OF THE BARYON ACOUSTIC PEAK

    SciTech Connect

    MartInez, Vicent J.; Arnalte-Mur, Pablo; De la Cruz, Pablo; Saar, Enn; Tempel, Elmo; Pons-BorderIa, MarIa Jesus

    2009-05-01

    The correlation function of the distribution of matter in the universe shows, at large scales, baryon acoustic oscillations, which were imprinted prior to recombination. This feature was first detected in the correlation function of the luminous red galaxies of the Sloan Digital Sky Survey (SDSS). Recently, the final release (DR7) of the SDSS has been made available, and the useful volume is about two times bigger than in the old sample. We present here, for the first time, the redshift-space correlation function of this sample at large scales together with that for one shallower, but denser volume-limited subsample drawn from the Two-Degree Field Redshift Survey. We test the reliability of the detection of the acoustic peak at about 100 h {sup -1} Mpc and the behavior of the correlation function at larger scales by means of careful estimation of errors. We confirm the presence of the peak in the latest data although broader than in previous detections.

  5. Kitt Peak Speckle Interferometry of Close Visual Binary Stars (Abstract)

    NASA Astrophysics Data System (ADS)

    Gener, R.; Rowe, D.; Smith, T. C.; Teiche, A.; Harshaw, R.; Wallace, D.; Weise, E.; Wiley, E.; Boyce, G.; Boyce, P.; Branston, D.; Chaney, K.; Clark, R. K.; Estrada, C.; Estrada, R.; Frey, T.; Green, W. L.; Haurberg, N.; Jones, G.; Kenney, J.; Loftin, S.; McGieson, I.; Patel, R.; Plummer, J.; Ridgely, J.; Trueblood, M.; Westergren, D.; Wren, P.

    2014-12-01

    (Abstract only) Speckle interferometry can be used to overcome normal seeing limitations by taking many very short exposures at high magnification and analyzing the resulting speckles to obtain the position angles and separations of close binary stars. A typical speckle observation of a close binary consists of 1,000 images, each 20 milliseconds in duration. The images are stored as a multi-plane FITS cube. A portable speckle interferometry system that features an electron-multiplying CCD camera was used by the authors during two week-long observing runs on the 2.1-meter telescope at Kitt Peak National Observatory to obtain some 1,000 data cubes of close binaries selected from a dozen different research programs. Many hundreds of single reference stars were also observed and used in deconvolution to remove undesirable atmospheric and telescope optical effects. The database of well over one million images was reduced with the Speckle Interferometry Tool of platesolve3. A few sample results are provided. During the second Kitt Peak run, the McMath-Pierce 1.6- and 0.8-meter solar telescopes were evaluated for nighttime speckle interferometry, while the 0.8-meter Coude feed was used to obtain differential radial velocities of short arc binaries.

  6. What are the megahertz peaked-spectrum sources?

    NASA Astrophysics Data System (ADS)

    Coppejans, Rocco; Cseh, Dávid; van Velzen, Sjoert; Falcke, Heino; Intema, Huib T.; Paragi, Zsolt; Müller, Cornelia; Williams, Wendy L.; Frey, Sándor; Gurvits, Leonid I.; Körding, Elmar G.

    2016-07-01

    Megahertz peaked-spectrum (MPS) sources have spectra that peak at frequencies below 1 GHz in the observer's frame and are believed to be radio-loud active galactic nuclei (AGN). We recently presented a new method to search for high-redshift AGN by identifying unusually compact MPS sources. In this paper, we present European VLBI Network (EVN) observations of 11 MPS sources which we use to determine their sizes and investigate the nature of the sources with ˜10 mas resolution. Of the 11 sources, we detect 9 with the EVN. Combining the EVN observations with spectral and redshift information, we show that the detected sources are all AGN with linear sizes smaller than 1.1 kpc and are likely young. This shows that low-frequency colour-colour diagrams are an easy and efficient way of selecting small AGN and explains our high detection fraction (82 per cent) in comparison to comparable surveys. Finally we argue that the detected sources are all likely compact symmetric objects and that none of the sources are blazars.

  7. Acetaminophen overdose associated with double serum concentration peaks

    PubMed Central

    Papazoglu, Cristian; Ang, Jonathan R.; Mandel, Michael; Basak, Prasanta; Jesmajian, Stephen

    2015-01-01

    Acetaminophen is the most commonly used analgesic–antipyretic medication in the United States. Acetaminophen overdose, a frequent cause of drug toxicity, has been recognized as the leading cause of fatal and non-fatal hepatic necrosis. N-Acetylcysteine is the recommended antidote for acetaminophen poisoning. Despite evidence on the efficacy of N-acetylcysteine for prevention of hepatic injury, controversy persists about the optimal duration of the therapy. Here, we describe the case of a 65-year-old male with acetaminophen overdose and opioid co-ingestion who developed a second peak in acetaminophen serum levels after completing the recommended 21-hour intravenous N-acetylcysteine protocol and when the standard criteria for monitoring drug levels was achieved. Prolongation of N-acetylcysteine infusion beyond the standard protocol, despite a significant gap in treatment, was critical for successful avoidance of hepatotoxicity. Delay in acetaminophen absorption may be associated with a second peak in serum concentration following an initial declining trend, especially in cases of concomitant ingestion of opioids. In patients with acetaminophen toxicity who co-ingest other medications that may potentially delay gastric emptying or in those with risk factors for delayed absorption of acetaminophen, we recommend close monitoring of aminotransferase enzyme levels, as well as trending acetaminophen concentrations until undetectable before discontinuing the antidote therapy. PMID:26653695

  8. An analysis of Super typhoon Rammasun's(2014) peak intensity

    NASA Astrophysics Data System (ADS)

    Cai, Qinbo; Xu, Yinglong

    2016-04-01

    Super typhoon Rammasun (2014) made landfall over Hainan Island, China, at 0730UTC 18 July 2014. Due to the damage of the anemometers, the Automatic Weather Stations (AWS) and the bouy which by Rammasun passed, failed to obtain its peak wind. Lack of the direct evident, in real-time monitoring, its peak intensities were given by 110kts (.i.e. 60m/s)/910hPa,135kts/922hPa , and 90kts/935hPa based on Dvorak technique , which were made by China Meteorological Administration (CMA),Joint Typhoon Warning Center(JTWC), and Japan Meteorological Agency (JMA) respectively. However, a minimum pressure of 881.2hPa recorded by a barometer which located at Qixhou island (19.982︒N,111.269︒E) while Rammasun approaching, indicates that its intensity was under estimated. By using observation data such as AWS, satellite, Doppler radar and wind tower near the ground, this study performs a detail evaluation to obtain its actual intensity. At 0521UTC, Qizhou Island station recorded 881.2hPa of the minimum station pressure and 899.2hPa of minimum sea level pressure (MSLP) while the anemometer had been destroyed. These are the lowest records in Chinese history and also are ones of the global lowest pressures obtained directly by barometer. It is evident that Rammasun's eyewall did not pass across Qizhou Island directly, so the actual MSLP should be lower than 899.2hPa. By applying wind-pressure relationship, it is reckoned that the reasonable MSLP and peak wind of Rammasun should be 888hPa and 70-76m/s, which makes Rammasun the strongest typhoon ever made landfall in China's history. In order to intuitively investigate the real intensity of Ramasun, eyewall structures are compared with some historical extreme typhoons (hurricanes) such as Saomai(2006), Haiyan(2013) and Katrina(2005). Satellite images show that the dense overcast convection strength of Rammasun is stronger than those when Saomai and Katrina were in their peak intensities and before landing, but weaker than Haiyan. The

  9. Electron beam stability and beam peak to peak motion data for NSLS X-Ray storage ring

    SciTech Connect

    Singh, O.

    1993-07-01

    In the past two years, a significant reduction in electron beam motion has been achieved at the NSLS X-Ray storage ring. The implementation of global analog orbit feedbacks, based on a harmonics correction scheme, has reduced the beam motion globally. Implementation of six local analog feedback systems has reduced the beam motion even further at the corresponding beam line straight sections. This paper presents beam motion measurements, showing the improvement due to the feedback systems. Beam motion is measured using a spectrum analyzer and data is presented at various frequencies, where peaks were observed. Finally, some of the beam motion sources are discussed.

  10. Von Ringplaneten und schwarzen Löchern. Die Top-Themen der Astronomie

    NASA Astrophysics Data System (ADS)

    Keller, Hans-Ulrich

    Die spannendsten Monatsthemen der letzten Jahre. Wie alt ist das Universum? Woher kommen die Sterne? Beeinflusst der Mond das irdische Leben? Fast jeder mag sich diese und ähnliche Fragen schon einmal gestellt haben. Kurzweilig berichtet Hans-Ulrich Keller von alten Weisheiten und neuen Erkenntnissen aus der Wissenschaft. Mit vielen farbigen Bildern und Illustrationen sind diese "astronomischen Kurzgeschichten" Lesevergnügen und Informationsquelle zugleich. In über 20 Artikeln erfahren Sie z. B. etwas über: Das feurige Schicksal unseres Sonnensystems. Das Rätsel der dunklen Materie. Die Suche nach außerirdischen Intelligenzen.

  11. Erfassung tribologischer Zusammenhänge und Erkenntnisse in einer Datenbank

    NASA Astrophysics Data System (ADS)

    Gold, Peter Werner; Jacobs, Georg; Loos, J.; Rombach, Volker; Kurutas, Savas; Fröde, Astrid

    Die Datenbank enthält die tribologischen und stofflichen Daten, die innerhalb des Sonderforschungsbereichs 442 ermittelt wurden. Sie wird genutzt, um Informationen über die Eigenschaften von Schmierstoffen und Werkstoffverbunden, sowie über Prüfstände und Versuchsergebnisse zu erhalten. Diese Wissensbasis kann dazu beitragen, ökologisch verträgliche Tribosysteme mit Hilfe der Auswerte-Systeme (Module) auszulegen. Dabei handelt es sich um Berechnungswerkzeuge und Expertenwissen z. B. in Bezug auf die Auswahl von Schichtsystemen. Eine nähere Beschreibung der Auswerte-Systeme kann den folgenden Abschnitten entnommen werden.

  12. Technical Potential for Peak Load Management Programs in New Jersey

    SciTech Connect

    Kirby, B.J.

    2002-12-13

    Restructuring is attempting to bring the economic efficiency of competitive markets to the electric power industry. To at least some extent it is succeeding. New generation is being built in most areas of the country reversing the decades-long trend of declining reserve margins. Competition among generators is typically robust, holding down wholesale energy prices. Generators have shown that they are very responsive to price signals in both the short and long term. But a market that is responsive only on the supply side is only half a market. Demand response (elasticity) is necessary to gain the full economic advantages that restructuring can offer. Electricity is a form of energy that is difficult to store economically in large quantities. However, loads often have some ability to (1) conveniently store thermal energy and (2) defer electricity consumption. These inherent storage and control capabilities can be exploited to help reduce peak electric system consumption. In some cases they can also be used to provide system reliability reserves. Fortunately too, technology is helping. Advances in communications and control technologies are making it possible for loads ranging from residential through commercial and industrial to respond to economic signals. When we buy bananas, we don't simply take a dozen and wait a month to find out what the price was. We always ask about the price before we decide how many bananas we want. Technology is beginning to allow at least some customers to think about their electricity consumption the same way they think about most of their other purchases. And power system operators and regulators are beginning to understand that customers need to remain in control of their own destinies. Many customers (residential through industrial) are willing to respond to price signals. Most customers are not able to commit to specific responses months or years in advance. Electricity is a fluid market commodity with a volatile value to both

  13. Specific Intensity for Peaking: Is Race Pace the Best Option?

    PubMed Central

    Munoz, Iker; Seiler, Stephen; Alcocer, Alberto; Carr, Natasha; Esteve-Lanao, Jonathan

    2015-01-01

    Background: The peaking period for endurance competition is characterized for a relative increase of the intensity of training, after a longer period of training relatively dominated by lower intensity and higher volume Objectives: The present study was designed to compare physiological and 10 km performance effects of high intensity training (HIT) versus race pace interval training (RP) during peaking for competition in well-trained runners. Patients and Methods: 13 athletes took part in the study, they were divided into two groups: HIT and RP. HIT performed short intervals at ~105% of the maximal aerobic velocity (MAV), while RP trained longer intervals at a speed of ~90% of the MAV (a speed approximating 10 km race pace). After 12 weeks of baseline training, the athletes trained for 6 weeks under one of the two peaking regimes. Subjects performed 10 km prior to and after the intervention period. The total load of training was matched between groups during the treatment phase. Subjects completed a graded treadmill running test until volitional exhaustion prior to each 10 km race. MAV was determined as the minimal velocity eliciting maximal oxygen consumption (VO2max). Results: Both groups significantly improved their 10 km time (35 minutes 29 seconds ± 1 minutes 41 seconds vs 34 minutes 53 seconds ± 1 minutes 55 seconds, P < 0.01 for HIT; 35 minutes 27 seconds ± 1 minutes 40 seconds vs 34 minutes 53 seconds ± 1 minutes 18 seconds P < 0.01 for RP). VO2max increased after HIT (69 ± 3.6 vs 71.5 ± 4.2 ml.Kg-1.min-1, P < 0.05); while it didn’t for RP (68.4 ± 6 vs 69.8 ± 3 ml.Kg-1.min-1, p>0.05). In contrast, running economy decreased significantly after HIT (210 ± 6 ml.Kg-1.km-1 vs 218 ± 9, P < 0.05). Conclusions: A 6 week period of training at either 105% of MAV or 90% of MAV yielded similar performance gains in a 10km race performed at ~90% MAV. Therefore, the physiological impact of HIT training seems to be positive for VO2max but negative for running

  14. Chromatographic peak alignment using derivative dynamic time warping.

    PubMed

    Bork, Christopher; Ng, Kenneth; Liu, Yinhan; Yee, Alex; Pohlscheidt, Michael

    2013-01-01

    Chromatogram overlays are frequently used to monitor inter-batch performance of bioprocess purification steps. However, the objective analysis of chromatograms is difficult due to peak shifts caused by variable phase durations or unexpected process holds. Furthermore, synchronization of batch process data may also be required prior to performing multivariate analysis techniques. Dynamic time warping was originally developed as a method for spoken word recognition, but shows potential in the objective analysis of time variant signals, such as manufacturing data. In this work we will discuss the application of dynamic time warping with a derivative weighting function to align chromatograms to facilitate process monitoring and fault detection. In addition, we will demonstrate the utility of this method as a preprocessing step for multivariate model development. PMID:23292764

  15. Mean and peak wind load reduction on heliostats

    SciTech Connect

    Peterka, J.A.; Tan, L.; Bienkiewcz, B.; Cermak, J.E.

    1987-09-01

    This report presents the results of wind-tunnel tests supported through the Solar Energy Research Institute (SERI) by the Office of Solar Thermal Technology of the US Department of Energy as part of the SERI research effort on innovative concentrators. As gravity loads on drive mechanisms are reduced through stretched-membrane technology, the wind-load contribution of the required drive capacity increases in percentage. Reduction of wind loads can provide economy in support structure and heliostat drive. Wind-tunnel tests have been directed at finding methods to reduce wind loads on heliostats. The tests investigated both mean and peak forces, and moments. A significant increase in ability to predict heliostat wind loads and their reduction within a heliostat field was achieved. In addition, a preliminary review of wind loads on parabolic dish collectors was conducted, resulting in a recommended research program for these type collectors. 42 refs., 38 figs., 1 tab.

  16. Micrometoric Impact Effects: Peak Pressure versus Spectral Variation

    NASA Technical Reports Server (NTRS)

    Jensen, Elizabeth; Lederer, S. M.; Wooden, D. H.; Lindsay, S. S.; Keller, L. P.; Cintala, M. J.; Zolensky, M. E.

    2013-01-01

    At the Experimental Impact Laboratory at NASA Johnson Space Center, we have investigated the surface properties of asteroids caused by collisions in the mid-infrared (2.5 to 16 microns) by impacting forsterite and enstatite across a range of velocities (as predicted by the Nice Model) and at varying temperatures. The crystal structure in these minerals can be deformed by the shock wave from the impact as well as sheared into smaller particle sizes. Our current focus is on the differing effects between 2.3 and 2.6 km/sec, as well as the differences between a cold sample at -20C and a room temperature sample at 25C. We find that the spectral variation and crystal deformation varies non-linearly with the peak shock pressure.

  17. Origin of the first sharp diffraction peak in glasses

    NASA Astrophysics Data System (ADS)

    Crupi, Cristina; Carini, Giuseppe; González, Miguel; D'Angelo, Giovanna

    2015-10-01

    Although glasses have been largely used for a wide variety of technological applications, much of their underlying structure and dynamical properties remain puzzling. We present a detailed investigation of the intermediate-range structure of a series of alkaline borate glasses carried out by performing neutron diffraction measurements. We propose that the first sharp diffraction peak of glasses arises from the periodicity of the boundaries of voids in a random network and explain its compositional and pressure dependence. In this framework, the planar section of a void is an n -membered ring of all-side vertex sharing basic structural units. Furthermore, we suggest that thermally activated relaxations responsible for the ultrasonic absorption in borate glasses stem from transverse motions of atoms bridging structural units confining voids.

  18. Robust Majorana Conductance Peaks for a Superconducting Lead

    NASA Astrophysics Data System (ADS)

    Peng, Yang; Pientka, Falko; Vinkler-Aviv, Yuval; Glazman, Leonid I.; von Oppen, Felix

    2015-12-01

    Experimental evidence for Majorana bound states largely relies on measurements of the tunneling conductance. While the conductance into a Majorana state is in principle quantized to 2 e2/h , observation of this quantization has been elusive, presumably due to temperature broadening in the normal-metal lead. Here, we propose to use a superconducting lead instead, whose gap strongly suppresses thermal excitations. For a wide range of tunneling strengths and temperatures, a Majorana state is then signaled by symmetric conductance peaks at e V =±Δ of a universal height G =(4 -π )2 e2/h . For a superconducting scanning tunneling microscope tip, Majorana states appear as spatial conductance plateaus while the conductance varies with the local wave function for trivial Andreev bound states. We discuss effects of nonresonant (bulk) Andreev reflections and quasiparticle poisoning.

  19. Robust Majorana Conductance Peaks for a Superconducting Lead.

    PubMed

    Peng, Yang; Pientka, Falko; Vinkler-Aviv, Yuval; Glazman, Leonid I; von Oppen, Felix

    2015-12-31

    Experimental evidence for Majorana bound states largely relies on measurements of the tunneling conductance. While the conductance into a Majorana state is in principle quantized to 2e^{2}/h, observation of this quantization has been elusive, presumably due to temperature broadening in the normal-metal lead. Here, we propose to use a superconducting lead instead, whose gap strongly suppresses thermal excitations. For a wide range of tunneling strengths and temperatures, a Majorana state is then signaled by symmetric conductance peaks at eV=±Δ of a universal height G=(4-π)2e(2)/h. For a superconducting scanning tunneling microscope tip, Majorana states appear as spatial conductance plateaus while the conductance varies with the local wave function for trivial Andreev bound states. We discuss effects of nonresonant (bulk) Andreev reflections and quasiparticle poisoning. PMID:26765015

  20. Cryogenic precision digital temperature control with peaked frequency response

    NASA Astrophysics Data System (ADS)

    Li, Jie; Lockhart, James M.; Boretsky, Peter

    2004-05-01

    A high precision temperature control system capable of maintaining the temperature of superconducting quantum interference devices (SQUIDs) constant to within 1.0 μK root-mean square over a narrow frequency band was designed and built for use with the superconducting readout system of the Gravity Probe B experiment. The system utilizes an analog ac temperature bridge with a digital proportional-integral control loop which incorporates a peaking filter. A disturbance attenuation factor of 86 or greater over the required frequency band was demonstrated in system tests with the cryogenic hardware, allowing the SQUID system to achieve the required stability. The control system was robust against variations in the thermal characteristics of the cryogenic hardware.

  1. Bayesian Analysis of Peak Ground Acceleration Attenuation Relationship

    SciTech Connect

    Mu Heqing; Yuen Kaveng

    2010-05-21

    Estimation of peak ground acceleration is one of the main issues in civil and earthquake engineering practice. The Boore-Joyner-Fumal empirical formula is well known for this purpose. In this paper we propose to use the Bayesian probabilistic model class selection approach to obtain the most suitable prediction model class for the seismic attenuation formula. The optimal model class is robust in the sense that it has balance between the data fitting capability and the sensitivity to noise. A database of strong-motion records is utilized for the analysis. It turns out that the optimal model class is simpler than the full order attenuation model suggested by Boore, Joyner and Fumal (1993).

  2. Suppression of jet noise peak by velocity profile reshaping

    NASA Astrophysics Data System (ADS)

    Fujii, S.; Nishiwaki, H.; Takeda, K.

    1981-07-01

    Proposed here is an efficient noise-abating system having the potential for application to a broad spectrum of turbofan engines. An exhaust system with the core nozzle reshaped into an elliptic exit section from the conventional circular nozzle is recommended. The comparison of the scale-model tests revealed that a 5 dB decrease in peak noise levels was realized with a slight increase of the sound pressure at large emission angles. A laser Doppler velocimeter was used to quantify the high-temperature flow turbulence. With the elliptic core nozzle, the jet flow was more diffused axially and spread radially along the major axis. The noise reduction was attributed to the enhancement of the sound refraction and to the lower sound generation, due to the turbulence suppression as well as the lowered mean density gradients at the noise source.

  3. 2009 Observations of X-rays at South Baldy Peak

    NASA Astrophysics Data System (ADS)

    Lundberg, J.; Millan, R.

    2009-12-01

    Observations of x-rays were made using two scintillator detectors (a 3x3 in. NaI crystal and a 1.5x1.5 in. LaBr(Ce) crystal) atop South Baldy Peak, New Mexico from July until September in an attempt to observe x-ray emissions from lightning strikes. It has been observed previously that accelerated electrons in lightning produce Bremsstrahlung that can be seen with ground detectors. The output of the two detectors was digitized without the use of pre-amplification to preserve pulse shapes during high count rate events. Being presented is data from these observations as well as comparisons of analysis techniques that can be used to decompose simple output pulses from scintillator detectors.

  4. Regional boreal biodiversity peaks at intermediate human disturbance.

    PubMed

    Mayor, S J; Cahill, J F; He, F; Sólymos, P; Boutin, S

    2012-01-01

    The worldwide biodiversity crisis has intensified the need to better understand how biodiversity and human disturbance are related. The 'intermediate disturbance hypothesis' suggests that disturbance regimes generate predictable non-linear patterns in species richness. Evidence often contradicts intermediate disturbance hypothesis at small scales, and is generally lacking at large regional scales. Here, we present the largest extent study of human impacts on boreal plant biodiversity to date. Disturbance extent ranged from 0 to 100% disturbed in vascular plant communities, varying from intact forest to agricultural fields, forestry cut blocks and oil sands. We show for the first time that across a broad region species richness peaked in communities with intermediate anthropogenic disturbance, as predicted by intermediate disturbance hypothesis, even when accounting for many environmental covariates. Intermediate disturbance hypothesis was consistently supported across trees, shrubs, forbs and grasses, with temporary and perpetual disturbances. However, only native species fit this pattern; exotic species richness increased linearly with disturbance. PMID:23072810

  5. Health monitoring in composite materials via peak strain sensing

    NASA Astrophysics Data System (ADS)

    Thompson, Larry D.; Westermo, Bruce D.

    1996-11-01

    Fiber-reinforced composite materials are beginning to be employed in applications related to retrofit and repair of large-scale civil structures. This paper discusses the utilization of a passive, pea, strain monitoring technology to the damage and health assessment of composite structures. Applications considered include epoxy-matrix composite materials reinforced with chopped glass, continuous glass fibers, carbon-fiber mat as well as continuous carbon-fiber. The advantages of the various material applications are discussed as they apply to large civil structures with peak strain monitoring data presented to illustrate how the systems can be field monitored. Full-scale structural component testing as well as subscale laboratory testing results will be presented and discussed. Recommendations are provided to guide the engineering community in such composite applications and to provide a design framework for the inclusion of simple and reliable sensor systems to detect both short-term and long-term damage.

  6. Inspiring pupils in STEM through Tim Peake's Principia Mission

    NASA Astrophysics Data System (ADS)

    Grant, Stephanie

    2016-04-01

    This poster looks at a particular case study of how a science programme with a lot of media attention can be embedded into schools to inspire pupils in STEM subjects. In this case, the UK has become very excited about their first publicly funded British astronaut, Tim Peake, visiting the International Space Station between December 2015 and June 2016. Tim is particularly keen to dedicate a lot of his time to education initiatives including undertaking a live radio contact with a handful of UK schools so that pupils can ask him their questions. A group of schools in Norfolk have won this opportunity and will host a live radio contact in February 2015. As part of this initiative, local schools (primary and secondary) are being encouraged to embed the mission into their curriculum in various ways using many excellent resources developed by a number of agencies. The range of these and our proposed methods for judging their efficacies are explored in this poster.

  7. Extrasolar Planet Transits Observed at Kitt Peak National Observatory

    NASA Technical Reports Server (NTRS)

    Sada, Pedro V.; Jennings, Donald E.; Deming, Drake; Jennings, Donald E.; Jackson, Brian; Hamilton, Catrina M.; Fraine, Jonathan; Peterson, Steven W.; Haase, Flynn; Bays, Kevin; Lunsford, Allen; O'Gorman, Eamon

    2012-01-01

    We obtained J-, H-, and JH-band photometry of known extrasolar planet transiting systems at the 2.1 m Kitt Peak National Observatory Telescope using the FLAMINGOS infrared camera between 2008 October and 2011 October. From the derived light curves we have extracted the midtransit times, transit depths and transit durations for these events. The precise midtransit times obtained help improve the orbital periods and also constrain transit-time variations of the systems. For most cases the published system parameters successfully accounted for our observed light curves, but in some instances we derive improved planetary radii and orbital periods. We complemented our 2.1 m infrared observations using CCD z0-band and B-band photometry (plus two H(alpha) filter observations) obtained with the Kitt Peak Visitor Center Telescope, and with four H-band transits observed in 2007 October with the NSO's 1.6 m McMath-Pierce Solar Telescope. The principal highlights of our results are (1) Our ensemble of J-band planetary radii agree with optical radii, with the best-fit relation being RpRJ0:0017 0:979RpRvis. (2) We observe starspot crossings during the transit of WASP-11HAT-P-10. (3) We detect starspot crossings by HAT-P-11b (Kepler-3b), thus confirming that the magnetic evolution of the stellar active regions can be monitored even after the Kepler mission has ended. (4) We confirm a grazing transit for HAT-P-27WASP-40. In total, we present 57 individual transits of 32 known exoplanet systems.

  8. Space geodetic techniques for global modeling of ionospheric peak parameters

    NASA Astrophysics Data System (ADS)

    Alizadeh, M. Mahdi; Schuh, Harald; Schmidt, Michael

    The rapid development of new technological systems for navigation, telecommunication, and space missions which transmit signals through the Earth’s upper atmosphere - the ionosphere - makes the necessity of precise, reliable and near real-time models of the ionospheric parameters more crucial. In the last decades space geodetic techniques have turned into a capable tool for measuring ionospheric parameters in terms of Total Electron Content (TEC) or the electron density. Among these systems, the current space geodetic techniques, such as Global Navigation Satellite Systems (GNSS), Low Earth Orbiting (LEO) satellites, satellite altimetry missions, and others have found several applications in a broad range of commercial and scientific fields. This paper aims at the development of a three-dimensional integrated model of the ionosphere, by using various space geodetic techniques and applying a combination procedure for computation of the global model of electron density. In order to model ionosphere in 3D, electron density is represented as a function of maximum electron density (NmF2), and its corresponding height (hmF2). NmF2 and hmF2 are then modeled in longitude, latitude, and height using two sets of spherical harmonic expansions with degree and order 15. To perform the estimation, GNSS input data are simulated in such a way that the true position of the satellites are detected and used, but the STEC values are obtained through a simulation procedure, using the IGS VTEC maps. After simulating the input data, the a priori values required for the estimation procedure are calculated using the IRI-2012 model and also by applying the ray-tracing technique. The estimated results are compared with F2-peak parameters derived from the IRI model to assess the least-square estimation procedure and moreover, to validate the developed maps, the results are compared with the raw F2-peak parameters derived from the Formosat-3/Cosmic data.

  9. THE LATE PEAKING AFTERGLOW OF GRB 100418A

    SciTech Connect

    Marshall, F. E.; Holland, S. T.; Sakamoto, T.; Antonelli, L. A.; Burrows, D. N.; Siegel, M. H.; Covino, S.; Fugazza, D.; De Pasquale, M.; Oates, S. R.; Evans, P. A.; O'Brien, P. T.; Osborne, J. P.; Pagani, C.; Liang, E. W.; Wu, X. F.; Zhang, B.

    2011-02-01

    GRB 100418A is a long gamma-ray burst (GRB) at redshift z = 0.6235 discovered with the Swift Gamma-ray Burst Explorer with unusual optical and X-ray light curves. After an initial short-lived, rapid decline in X-rays, the optical and X-ray light curves observed with Swift are approximately flat or rising slightly out to at least {approx}7 x 10{sup 3} s after the trigger, peak at {approx}5 x 10{sup 4} s, and then follow an approximately power-law decay. Such a long optical plateau and late peaking is rarely seen in GRB afterglows. Observations with Rapid Eye Mount during a gap in the Swift coverage indicate a bright optical flare at {approx}2.5 x 10{sup 4} s. The long plateau phase of the afterglow is interpreted using either a model with continuous injection of energy into the forward shock of the burst or a model in which the jet of the burst is viewed off-axis. In both models the isotropic kinetic energy in the late afterglow after the plateau phase is {>=}10{sup 2} times the 10{sup 51} erg of the prompt isotropic gamma-ray energy release. The energy injection model is favored because the off-axis jet model would require the intrinsic T{sub 90} for the GRB jet viewed on-axis to be very short, {approx}10 ms, and the intrinsic isotropic gamma-ray energy release and the true jet energy to be much higher than the typical values of known short GRBs. The non-detection of a jet break up to t {approx} 2 x 10{sup 6} s indicates a jet half-opening angle of at least {approx}14{sup 0}, and a relatively high-collimation-corrected jet energy of E{sub jet} {>=} 10{sup 52} erg.

  10. The Late Peaking Afterglow of GR8 100418A

    NASA Technical Reports Server (NTRS)

    Marshall, Frank; Antonelli, L. A.; Burrows, D. N.; Covino, S.; dePasquale, M.; Evans, P. A.; Fugazza, D.; Holland, S. T.; Liang, E. W.; OBrien, P. T.; Osborne, J. P.; Pagani, C.; Sakamoto, T.; Siegel, M. H.; Wu, X. F.; Zhang, B.

    2010-01-01

    GRB 100418A is a long Gamma-Ray Burst at redshift z=0.6235 discovered with the Swift Gamma-Ray Burst Explorer with unusual optical and X-ray light curves ' After an initial short-lived, rapid decline in X-rays, the optical and X-ray light curves observed with Swift are approximately flat or rising slightly out to at least approx.7 ks after the trigger, peak at approx.50 ks, and then follow an approximately power-law decay. Such a long optical plateau and late peaking is rarely seen in 6R8 afterglows. Observations with REM during a gap in the Swift coverage indicate a bright optical flare at approx.25 ks, The long plateau phase of the afterglow is interpreted using either a model with continuous injection of energy into the forward shock of the burst or a model in which the 'et of the burst is viewed off-axis. In both models the isotropic kinetic energy in the late afterglow after the plateau phase is >100 times the 10(exp 51) erg of the prompt isotropic gamma-ray energy release. The energy injection model is favored because the off-axis 'et model would require the intrinsic $T f801$ for the GR8 'et viewed on-axis to be very short, approx.10 ms, and the intrinsic isotropic gamma-ray energy release and the true jet energy to be much higher than the typical values of known short GRBs^ The non-detection of a 'et break up to approx.2 Ms indicates a jet half-opening angle of at least 14 degrees, and a relatively high collimation-corrected 'et energy of at least 10(exp 52) erg.

  11. GLATT Wirbelschichttechnologie zum Coating von Pulvern, Pellets und Mikropellets

    NASA Astrophysics Data System (ADS)

    Grave, Annette; Pöllinger, Norbert

    Wirbelschichtverfahren wurden ursprünglich in der chemischen Verfahrenstechnik angewandt. Ende der 1950er Jahre fand die Wirbelschichttrocknung Eingang in die pharmazeutische Industrie, da eine verbesserte Trocknungseffizienz im Vergleich zu bestehenden Verfahren erzielt werden konnte. Viele Granulationsprozesse wurden durch Feuchtgranulation in einem Zwangsmischer durchgeführt, worauf ein Trocknungsschritt in einem Hordentrockner folgte. Je nach Produktqualität kann eine Hordentrocknung allerdings mehrere Tage dauern. Derart lange Trocknungszeiten können bei Anwendung der Wirbelschichttrocknung häufig auf weniger als eine Stunde verkürzt werden. Die Wirbelschichttrocknung ist eine besonders effektive und schonende Art der Trocknung, da die gesamte Oberfläche der einzelnen Partikel für den Wärme- und Feuchteübergang zur Verfügung steht.

  12. Grundlagen und Vollzug der amtlichen Lebensmittelkontrolle in Deutschland

    NASA Astrophysics Data System (ADS)

    Neuhaus, Annette

    Für Menschen besteht ein täglicher Bedarf an Lebensmitteln, die gesundheitlich unbedenklich, allgemein zum Verzehr geeignet und unverfälscht sein sollen. Lebensmittel sind vergängliche Naturprodukte und bergen in sich Gefahren, die mit dem natürlichen Verderbnisvorgang verbunden sind. Zusätzlich bestehen Risiken durch eine unsachgemäße Herstellung, Behandlung oder Verarbeitung, zum Beispiel durch ungeeignete Zutaten oder technologische Verfahren, falsche Lagertemperaturen oder Verwendung ungeeigneter Behältnisse. So lange wie Lebensmittel zum Zweck der Gewinnerzielung an andere abgegeben werden, besteht darüber hinaus die Versuchung, Kunden durch Verfälschung oder andere Manipulation zu übervorteilen.

  13. Kinetic modelling of the optically stimulated conversion of peaks 5a and 5 to peak 4 in LiF:Mg,Ti (TLD-100).

    PubMed

    Weizman, Y; Horowitz, Y S; Oster, L

    2002-01-01

    The TC/LC conversion model for peaks 4, 5a and 5 in LiF:Mg,Ti (TLD-100) has been studied by solution of the coupled differential equations describing the charge carrier traffic following optical stimulation. Aspects of the model investigated were (i) the two-component exponential decay of the composite peak 5 TL intensity following the bleach, (ii) the role of retrapping during bleaching, (iii) the hole nature of peak 4 and (iv) the conversion of peak 5a traps to peak 4 traps. The high conversion efficiency is naturally explained due to the absence of conduction band competitive mechanisms in the optical ionisation of the electron in the e-h occupied structure corresponding to peak 5a and thereby leading to the hole-only occupied TC/LC leading to peak 4. PMID:12382845

  14. Suchmaschinen und Informationsqualität: Status quo, Problemfelder, Entwicklungstendenzen

    NASA Astrophysics Data System (ADS)

    Maaß, Christian; Gräfe, Gernot

    Das Thema Informationsqualität wird in den vorangegangenen Beiträgen umfangreich betrachtet. Die dabei geführte Diskussion zielt vordergründig auf organisatorische Dimensionen der Datenqualität, die strukturierte Datenanalyse oder Datenmanagementprozesse im Unternehmen ab. Dabei liegt ein Gro?teil der zur Unterstützung von Entscheidungsprozessen herangezogenen Informationen in Datenbanksystemen bzw. in einem Data Warehouse vor. Auf Basis verschiedener Analysetools (z. B. Online-Analytical-Processing) lassen sich diese Informationen dann systematisch auswerten. Allerdings können Entscheidungen nicht allein aufgrund der unternehmensintern vorliegenden Informationen getroffen werden. Vielmehr gilt es auch die aus der Unternehmensumwelt relevanten Informationen zu verarbeiten, die zum Teil über das Internet zugänglich sind. Im Gegensatz zu unternehmensinternen Datenbanksystemen handelt es sich beim Internet um ein schwach strukturiertes und offenes Netzwerk, weshalb die im Unternehmenskontext eingesetzten Analysetools kaum weiterhelfen, um Informationen mit hoher Qualität herauszufiltern. In dieser Situation spielen Suchmaschinen eine wichtige Rolle, um Informationen zu identifizieren und anhand verschiedener Kriterien in Form einer Suchergebnisseite zu sortieren. Konservative Schätzungen gehen davon aus, dass über Suchmaschinen zwischen 70 und 85 Prozent aller Informationsrecherchen im Internet erfolgen [Förster & Kreuz 2002, S. 68]. Teilweise beziffert man diesen Wert sogar auf über 90 Prozent [Schulz et al. 2005, S. 20]. Ungeachtet dieser herausragenden Stellung von Suchmaschinen kann konstatiert werden, dass die Qualität der Suchergebnisse oftmals nur gering ist.

  15. Homo sapiens und das 21. Jahrhundert - evolutionsbiologische Betrachtungen

    NASA Astrophysics Data System (ADS)

    Oehler, Jochen

    Was meinen wir, wenn wir vom 21. Jahrhundert sprechen? Es ist ein Zeitraum, der sich durch die Festlegung des Menschen ergibt, die nach Christi Geburt verstrichene Zeit in Jahren zu zählen. Eine kulturelle Leistung, die primär auf der Fähigkeit beruht, das Phänomen Zeit a priori wahrnehmen zu können. Die Antizipation der Zeit ist in der Welt der Organismen ein weit verbreitetes Prinzip. Entsprechend existieren auf zellulären bis zu zentralnervösen Ebenen verschiedenste Mechanismen, die dies ermöglichen. So basiert die Zeitwahrnehmung des Menschen auf zentralnervösen Strukturen und Prozessen phylogenetisch älterer Hirnstrukturen, die ihrerseits die Körperfunktionen von der zellulären bis zur Verhaltensebene steuern und regeln und sie damit an exogene Zeitregime, wie z. B. den Tag-Nacht-Rhythmus (circadianer Rhythmus), anpassen. Die Chronobiologie weist nach, welch große adaptive Bedeutung zeitantizipierende Mechanismen für die Organismen haben, das heißt Fitness fördernd sind (Piechulla 1999; Spork 2004). Die für verschiedene Kulturen des Menschen maßgebliche Zeitrechnung basiert auf der quantitativen Erfassung kosmisch oder irdisch regelmäßig wiederkehrender Ereignisse.

  16. The peak bone mass concept: is it still relevant?

    PubMed

    Schönau, Eckhard

    2004-08-01

    The peak bone mass concept implies that optimal skeletal development during childhood and adolescence will prevent fractures in late adulthood. This concept is based on the observation that areal bone density increases with growth during childhood, is highest around 20 years of age and declines thereafter. However, it is now clear that strong bones in the youngster do not necessarily lead to a fracture-free old age. In the recent bone densitometric literature, the terms bone mass and bone density are typically used synonymously. In physics, density has been defined as the mass of a body divided by its volume. In clinical practice and science, "bone density" usually has a different meaning-the degree to which a radiation beam is attenuated by a bone, as judged from a two-dimensional projection image (areal bone density). The attenuation of a radiation beam does not only depend on physical density, but also on bone size. A small bone therefore has a lower areal bone density than a larger bone, even if the physical density is the same. Consequently, a low areal bone density value can simply reflect the small size of an otherwise normal bone. At present, bone mass analysis is very useful for epidemiological studies on factors that may have an impact on bone development. There is an ongoing discussion about whether the World Health Organization (WHO) definition of osteoporosis is over-simplistic and requires upgrading to include indices representing the distribution of bone and mineral (bone strength indices). The following suggestions and recommendations outline a new concept: bone mass should not be related to age. There is now more and more evidence that bone mass should be related to bone size or muscle function. Thus analyzed, there is no such entity as a "peak bone mass". Many studies are currently under way to evaluate whether these novel approaches increase sensitivity and specificity of fracture prediction in an individual. Furthermore, the focus of many bone

  17. Transport aloft drives peak ozone in the Mojave Desert

    NASA Astrophysics Data System (ADS)

    VanCuren, Richard

    2015-05-01

    Transport of anthropogenic pollution eastward out of the Los Angeles megacity region in California has been periodically observed to reach the Colorado River and the Colorado Plateau region beyond. In the 1980s, anthropogenic halocarbon tracers measured in and near the Las Angeles urban area and at a mountain-top site near the Colorado River, 400 km downwind, were shown to have a correlated seven-day cycle explainable by transport from the urban area with a time lag of 1-2 days. Recent short term springtime intensive studies using aircraft observations and regional modeling of long range transport of ozone from the Southern California megacity region showed frequent and persistent ozone impacts at surface sites across the Colorado Plateau and Southern Rocky Mountain region, at distances up to 1500 km, also with time lags of 1-2 days. However, the timing of ozone peaks at low altitude monitoring sites within the Mojave Desert, at distances from 100 to 400 km from the South Coast and San Joaquin Valley ozone source regions, does not show the expected time-lag behavior seen in the larger transport studies. This discrepancy is explained by recognizing ozone transport across the Mojave Desert to occur in a persistent layer of polluted air in the lower free troposphere with a base level at approximately 1 km MSL. This layer impacts elevated downwind sites directly, but only influences low altitude surface ozone maxima through deep afternoon mixing. Pollutants in this elevated layer derive from California source regions (the Los Angeles megacity region and the intensive agricultural region of the San Joaquin Valley), from long-range transport from Asia, and stratospheric down-mixing. Recognition of the role of afternoon mixing during spring and summer over the Mojave explains and expands the significance of previously published reports of ozone and other pollutants observed in and over the Mojave Desert, and resolves an apparent paradox in the timing of ozone peaks due to

  18. Radio continuum spectra of gigahertz-peaked spectrum galaxies

    NASA Astrophysics Data System (ADS)

    Torniainen, I.; Tornikoski, M.; Lähteenmäki, A.; Aller, M. F.; Aller, H. D.; Mingaliev, M. G.

    2007-07-01

    Context: Recent studies have shown that a remarkable share of quasars classified in the literature as gigahertz-peaked spectrum (GPS) sources and high frequency peakers (HFPs) are actually flaring flat-spectrum sources or blazars. Thus, at least among the quasar-type samples, genuine GPS sources and HFPs seem to be rare. Aims: We have studied variability and the shape of the radio continuum spectra of a sample of 96 galaxy-type GPS sources and HFPs in order to find out whether there is a similar contamination in the galaxy-type samples. Methods: We collected radio data for the sample from the literature, our long-term monitoring campaigns, and recent observations, and then plotted the radio continuum spectra. We also calculated the peak frequencies, the spectral indices, and the variability indices, and finally classified the sources according to these parameters. Results: About 30% of the galaxies in our sample are clearly GPS sources, for another ~30% there are not enough data for a solid classification, and the rest are flat- or steep-spectrum sources. Conclusions: The galaxy-type GPS samples seem to be cleaner than the quasar-type, but there is also a remarkable contamination of other source types among the galaxies. However, there may be a strong selection effect, originating from the different selection criteria of the original samples, which must be taken into consideration when comparing the results of this and our previous study. Both simultaneous spectra and long-term monitoring are essential when classifying convex-spectrum sources. However, even monitoring for several years may not reveal the variable nature of a source with a convex radio spectrum. Figures 4 to 9 are only available in electronic form at http://www.aanda.org Table 2 is only available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsweb.u-strasbg.fr/cgi-bin/qcat?J/A+A/469/451

  19. Biegen und Brechen im Supercomputer: Duktile Verformungen und spröde Brüche von Kristallen

    NASA Astrophysics Data System (ADS)

    Buehler, Markus J.; Gao, Huajian

    2004-01-01

    Ob sich ein Material unter Krafteinwirkung duktil verformt oder spröde bricht, hängt davon ab, wie sich in ihm Defekte ausbreiten. Um das zu untersuchen, zerstören wir in Supercomputer-Simulationen Nanokristalle, die bis zu einer Milliarde virtueller Atome enthalten. Die Simulationen zeigen zum Beispiel, wie sich Risse an der Grenzfläche zwischen einem härteren und einem weicheren Material ausbreiten. Sie erlauben auch nie zuvor gesehene Einblicke in die mikroskopischen Prozesse während der duktilen Verformung eines Metalls: Das kollektive Verhalten von vielen tausend Versetzungen führt zu einer Kaltverfestigung des Kristalls. Er wird spröde und bricht.

  20. Implications of ``peak oil'' for atmospheric CO2 and climate

    NASA Astrophysics Data System (ADS)

    Kharecha, Pushker A.; Hansen, James E.

    2008-09-01

    Unconstrained CO2 emission from fossil fuel burning has been the dominant cause of observed anthropogenic global warming. The amounts of "proven" and potential fossil fuel reserves are uncertain and debated. Regardless of the true values, society has flexibility in the degree to which it chooses to exploit these reserves, especially unconventional fossil fuels and those located in extreme or pristine environments. If conventional oil production peaks within the next few decades, it may have a large effect on future atmospheric CO2 and climate change, depending upon subsequent energy choices. Assuming that proven oil and gas reserves do not greatly exceed estimates of the Energy Information Administration, and recent trends are toward lower estimates, we show that it is feasible to keep atmospheric CO2 from exceeding about 450 ppm by 2100, provided that emissions from coal, unconventional fossil fuels, and land use are constrained. Coal-fired power plants without sequestration must be phased out before midcentury to achieve this CO2 limit. It is also important to "stretch" conventional oil reserves via energy conservation and efficiency, thus averting strong pressures to extract liquid fuels from coal or unconventional fossil fuels while clean technologies are being developed for the era "beyond fossil fuels". We argue that a rising price on carbon emissions is needed to discourage conversion of the vast fossil resources into usable reserves, and to keep CO2 beneath the 450 ppm ceiling.

  1. Residential implementation of critical-peak pricing ofelectricity

    SciTech Connect

    Herter, Karen

    2006-06-29

    This paper investigates how critical-peak pricing (CPP)affects households with different usage and income levels, with the goalof informing policy makers who are considering the implementation of CPPtariffs in the residential sector. Using a subset of data from theCalifornia Statewide Pricing Pilot of 2003-2004, average load changeduring summer events, annual percent bill change, and post-experimentsatisfaction ratings are calculated across six customer segments,categorized by historical usage and income levels. Findings show thathigh-use customers respond significantly more in kW reduction than dolow-use customers, while low-use customers save significantly more inpercentage reduction of annual electricity bills than do high-usecustomers results that challenge the strategy of targeting only high-usecustomers for CPP tariffs. Across income levels, average load and billchanges were statistically indistinguishable, as were satisfaction ratesresults that are compatible with a strategy of full-scale implementationof CPP rates in the residential sector. Finally, the high-use customersearning less than $50,000 annually were the most likely of the groups tosee bill increases about 5 percent saw bill increases of 10 percent ormore suggesting that any residential CPP implementation might considertargeting this customer group for increased energy efficiencyefforts.

  2. Springtime peaks of trace metals in Antarctic snow.

    PubMed Central

    Ikegawa, M; Kimura, M; Honda, K; Makita, K; Fujii, Y; Itokawa, Y

    1997-01-01

    Drifting snow samples were collected at Asuka Station (71 degrees 32'S, 24 degrees 08'E, 930 m above sea level) over a period from July to December 1991; 36 elements (including Na, Mg, K, Ca, Fe, Al, Li, V, Cr, Mn, Co, Ni, Cu, Zn, Ga, Se, Rb, Sr, Cd, Pb, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Th) in snow were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) by direct sample introduction. Concentrations of Cl-, NO3-, and SO(4)2- in the snow were also determined by ion chromatography. In late September to early October, there was a pronounced peak concentration of most of the elements together with non-sea salt sulfate. Enrichment factor analyses suggest that Na, Mg, Ca, K, and Sr are of marine origin and Al, Fe, Mn, Rb, Cr, Ni, Ga, V, and all the rare earth elements are of crustal origins. Volcanic eruption of Mt. Pinatubo (June 1991) and Mt. Hudson (August 1991) could be the reason for the precipitation of Pb, Cd, Cu, Zn, and Se together with non-sea salt sulfates in the austral spring at Asuka Station. Images Figure 1. Figure 2. Figure 3. PMID:9288501

  3. Z -peaked excess from heavy gluon decays to vectorlike quarks

    NASA Astrophysics Data System (ADS)

    Vignaroli, Natascia

    2015-06-01

    A 3 sigma excess has been recently announced by ATLAS in events with Z -peaked dilepton pairs, jets, and large transverse missing energy. We interpret this finding in the context of composite Higgs/Randall-Sundrum theories. We find that composite Higgs theories with custodial symmetry protection to the Z b b ¯ coupling predict a significant contribution to Z Z b b (and to h h b b ) final states coming from heavy gluon decays to pairs of bottom partner vectorlike quarks. The heavy gluon to vectorlike quark signal is largely accepted by the ATLAS selection if one of the Z bosons in the Z Z b b final state decays leptonically and the other to neutrinos. For a bottom partner of ˜900 GeV , we find that the ATLAS excess can be reproduced by composite Higgs models, in an experimentally allowed parameter space, for heavy gluon masses roughly in a range 1.87-2.15 TeV and for heavy gluon couplings to light quarks within ˜(0.3 - 0.65 )gS . We briefly discuss the implication of this result for future experimental tests.

  4. Optical intraday variability studies of 10 low energy peaked blazars

    NASA Astrophysics Data System (ADS)

    Rani, Bindu; Gupta, Alok C.; Joshi, U. C.; Ganesh, S.; Wiita, Paul J.

    2011-05-01

    We have carried out optical (R band) intraday variability (IDV) monitoring of a sample of 10 bright low energy peaked blazars (LBLs). 40 photometric observations, of an average of ˜4 h each, were made between 2008 September and 2009 June using two telescopes in India. Measurements with good signal-to-noise ratios were typically obtained within 1-3 min, allowing the detection of weak, fast variations using N-star differential photometry. We employed both structure function and discrete correlation function analysis methods to estimate any dominant time-scales of variability and found that in most of the cases any such time-scales were longer than the duration of the observation. The calculated duty cycle of IDV in LBLs during our observing run is ˜52 per cent, which is low compared to many earlier studies; however, the relatively short periods for which each source was observed can probably explain this difference. We briefly discuss possible emission mechanisms for the observed variability.

  5. Contingency discriminability and peak shift in concurrent schedules.

    PubMed

    Krägeloh, Christian U; Elliffe, Douglas M; Davison, Michael

    2006-07-01

    We investigated the effects of discriminative stimuli on choice in a highly variable environment using a procedure in which multiple two-key concurrent VI VI components changed every 10 reinforcers and were signaled by differential flashes of red and yellow keylights. Across conditions, five pigeons were exposed to a number of different combinations of the following component reinforcer ratios: 27:1, 9:1, 3:1, 1:1, 1:3, 1:9, 1:27. Overall, there was clear control by the component signals in that preference, early in components and particularly before any reinforcers had been delivered, was ordinally related to the signaled reinforcer ratios. In conditions in which only two components arranged unequal reinforcer ratios (e.g., 27:1 and 1:27) with the remaining components arranging 1:1 reinforcer ratios, preference before the first reinforcer in a component showed peak shift in that the most extreme preference did not occur in the unequal reinforcer-ratio components, but in 1:1 components further towards the ends of the stimulus dimension. The contingency-discriminability model (Davison & Nevin, 1999) was fitted to the data and provided an excellent description of the interactions between stimulus and reinforcer effects in a highly variable environment. PMID:16903490

  6. Using energy peaks to count dark matter particles in decays

    NASA Astrophysics Data System (ADS)

    Agashe, Kaustubh; Franceschini, Roberto; Kim, Doojin; Wardlow, Kyle

    2013-06-01

    We study the determination of the symmetry that stabilizes a dark matter (DM) candidate produced at colliders. Our question is motivated per se, and by several alternative symmetries that appear in models that provide a DM particle. To this end, we devise a strategy to determine whether a heavy mother particle decays into one visible massless particle and one or two DM particles. The counting of DM particles in these decays is relevant to distinguish the minimal choice of Z2 from a Z3 stabilization symmetry, under which the heavy particle and the DM are charged and the visible particle is not. Our method is novel in that it chiefly uses the peak of the energy spectrum of the visible particle and only secondarily uses the MT2 endpoint of events in which the heavy mother particles are pair-produced. We present new theoretical results concerning the energy distribution of the decay products of a three-body decay, which are crucial for our method. To demonstrate the feasibility of our method in investigating the stabilization symmetry, we apply it in distinguishing the decay of a bottom quark partner into a b quark and one or two DM particles. The method can be applied generally to distinguish two- and three-body decays, irrespective of DM.

  7. Coda Spectral Peaking for Nevada Nuclear Test Site Explosions

    SciTech Connect

    Murphy, K R; Mayeda, K; Walter, W R

    2007-09-10

    We have applied the regional S-wave coda calibration technique of Mayeda et al. (2003) to earthquake data in and around the Nevada Test Site (NTS) using 4 regional broadband stations from the LLNL seismic network. We applied the same path and site corrections to tamped nuclear explosion data and averaged the source spectra over the four stations. Narrowband coda amplitudes from the spectra were then regressed against inferred yield based on the regional m{sub b}(Pn) magnitude of Denny et al. (1987), along with the yield formulation of Vergino and Mensing (1990). We find the following: (1) The coda-derived spectra show a peak which is dependent upon emplacement depth, not event size; (2) Source size estimates are stable for the coda and show a dependence upon the near-source strength and gas porosity; (3) For explosions with the same m{sub b}(Pn) or inferred yield, those in weaker material have lower coda amplitudes at 1-3 Hz.

  8. Forecasting the Peak of the Present Solar Activity Cycle

    NASA Astrophysics Data System (ADS)

    Hamid, Rabab; Marzouk, Beshir

    2016-07-01

    Solar forecasting of the level of sun Activity is very important subject for all space programs. Most predictions are based on the physical conditions prevailing at or before the solar cycle minimum preceding the maximum in question. Our aim is to predict the maximum peak of cycle 24 using precursor techniques in particular those using spotless event, geomagnetic aa min. index and solar flux F10.7. Also prediction of exact date of the maximum (Tr) is taken in consideration. A study of variation over previous spotless event for cycles 7-23 and that for even cycles (8-22) are carried out for the prediction. Linear correlation between RM and spotless event around the preceding minimum gives RM24t = 101.9with rise time Tr = 4.5 Y. For the even cycles RM24e = 108.3 with rise time Tr = 3.9 Y. Based on the average aa min. index for the year of sunspot minimum cycles (13 - 23), we estimate the expected amplitude for cycle 24 to be RMaa = 116.5 for both the total and even cycles. Application of the data of solar flux F10.7 which cover only cycles (19-23) was taken in consideration and gives predicted maximum amplitude R24 10.7 = 146, which are over estimation. Our result indicating a somewhat weaker cycle 24 as compared to cycles 21-23.

  9. Determining the minimum instream flow for hydro peaking projects

    SciTech Connect

    Milhous, R.T. )

    1992-10-01

    A new analytical technique is available for quantifying and predicting the effect that a proposed hydro peaking operation, or a change in an existing project's operation, will have on physical habitat for aquatic populations downstream of the project. The technique, known as the dual flow analysis, is based on elements of the US Fish and Wildlife Service's Physical Habitat Simulation System (PHABSIM). PHABSIM is used to calculate the physical habitat for aquatic organisms in a stream. The assumption behind the development of this technique is that if the effects of a proposed project on physical habitat are known, one can better understand the effects on aquatic organisms. Thus, a defensible selection of an instream flow requirement can be made. The technique was developed as a result of a joint study by the US Fish and Wildlife Service and Niagara Mohawk Power Corp. at the 26.4-MW Bennetts Bridge and the 7.8-MW Lighthouse Hill developments on the Salmon river in upstate New York.

  10. [Accuracy of MiniWright peak expiratory flow meters

    PubMed

    Camargos, P A; Ruchkys, V C; Dias, R M; Sakurai, E

    2000-01-01

    OBJECTIVE: To evaluate the accuracy of the Mini-Wright (Clement Clarke International Ltd.) peak-flow meters. METHODS: Twenty of those meters were checked by use of electronic calibration syringe (Jones Flow-Volume Calibrator(R)). Nine of them had an old scale, with values displayed equidistantly, and eleven had a new mechanical scale with non-equidistant values. Each device was connected in series to the calibration syringe to perform eight hand-driven volume injections, with flows ranging from 100 to 700 l/min. Absolute and relative differences between meters and syringe were calculated, the syringe values taken as standard. The accuracy of the twenty Mini-Wright devices was validated by the American Thoracic Society criteria (-/+ 10% or -/+ 20 l/min), and/or European Respiratory Society criteria (-/+ 5% or -/+ 5 l/ min). RESULTS: New scale instruments were more accurate than old scale meters (p < 0.001), by both ATS and ERS criteria. Every meter was rechecked after 600 measurements. Both the old, and the new scale instruments maintained the same level of performance after this evaluation. CONCLUSIONS: Results suggest that new scale meters were accurate and can be safely used in clinical practice. The authors strongly recommend that they are rechecked regularly to ensure that they are within the ATS and ERS variation limits. PMID:14647633

  11. Estimation on Peak Ground Acceleration in Taiwan Area

    NASA Astrophysics Data System (ADS)

    Chen, K.

    2013-12-01

    Since the Taiwan area is situated on the subduction zone, where the Philippine Sea Plate is subducting underneath the Eurasian Plate, much attention is focused on seismic risk mitigation. The purpose of this paper is to study the potential of earthquakes hazard in the Taiwan area, using the seismic acceleration data collected by the Central Weather Bureau from 1993 to 2008. The theoretic Peak Ground Acceleration (PGA) is calculated basing on well developed velocity and attenuation models. The theoretic maximum amplitudes of the ground acceleration in Taiwan area for 30 events have been calculated by using the attenuation equation and the Q-structures. The deviations between the observed and theoretic PGA of 163 seismic stations in Taiwan area can be obtained. The results show that most of the deviation is small than 30%. It indicates that we can predict the maximum amplitude of ground acceleration for any events occurred in Taiwan area under the accuracy of 70 % (probability). The estimation of PGA for any earthquake will be obtained using the theoretic and corrected with these deviations.

  12. Major cooling intersecting peak Eemian Interglacial warmth in northern Europe

    NASA Astrophysics Data System (ADS)

    Helmens, Karin F.; Salonen, J. Sakari; Plikk, Anna; Engels, Stefan; Väliranta, Minna; Kylander, Malin; Brendryen, Jo; Renssen, Hans

    2015-08-01

    The degree of climate instability on the continent during the warmer-than-present Eemian Interglacial (around ca. 123 kyr ago) remains unsolved. Recently published high-resolution proxy data from the North Atlantic Ocean suggest that the Eemian was punctuated by abrupt events with reductions in North Atlantic Deep Water formation accompanied by sea-surface temperature cooling. Here we present multi-proxy data at an unprecedented resolution that reveals a major cooling event intersecting peak Eemian warmth on the North European continent. Two independent temperature reconstructions based on terrestrial plants and chironomids indicate a summer cooling of the order of 2-4 °C. The cooling event started abruptly, had a step-wise recovery, and lasted 500-1000 yr. Our results demonstrate that the common view of relatively stable interglacial climate conditions on the continent should be revised, and that perturbations in the North Atlantic oceanic circulation under warmer-than-present interglacial conditions may also lead to abrupt and dramatic changes on the adjacent continent.

  13. Fast-slow climate dynamics and peak global warming

    NASA Astrophysics Data System (ADS)

    Seshadri, Ashwin K.

    2016-06-01

    The dynamics of a linear two-box energy balance climate model is analyzed as a fast-slow system, where the atmosphere, land, and near-surface ocean taken together respond within few years to external forcing whereas the deep-ocean responds much more slowly. Solutions to this system are approximated by estimating the system's time-constants using a first-order expansion of the system's eigenvalue problem in a perturbation parameter, which is the ratio of heat capacities of upper and lower boxes. The solution naturally admits an interpretation in terms of a fast response that depends approximately on radiative forcing and a slow response depending on integrals of radiative forcing with respect to time. The slow response is inversely proportional to the "damping-timescale", the timescale with which deep-ocean warming influences global warming. Applications of approximate solutions are discussed: conditions for a warming peak, effects of an individual pulse emission of carbon dioxide (CO2 ), and metrics for estimating and comparing contributions of different climate forcers to maximum global warming.

  14. Masked Areas in Shear Peak Statistics: A Forward Modeling Approach

    NASA Astrophysics Data System (ADS)

    Bard, D.; Kratochvil, J. M.; Dawson, W.

    2016-03-01

    The statistics of shear peaks have been shown to provide valuable cosmological information beyond the power spectrum, and will be an important constraint of models of cosmology in forthcoming astronomical surveys. Surveys include masked areas due to bright stars, bad pixels etc., which must be accounted for in producing constraints on cosmology from shear maps. We advocate a forward-modeling approach, where the impacts of masking and other survey artifacts are accounted for in the theoretical prediction of cosmological parameters, rather than correcting survey data to remove them. We use masks based on the Deep Lens Survey, and explore the impact of up to 37% of the survey area being masked on LSST and DES-scale surveys. By reconstructing maps of aperture mass the masking effect is smoothed out, resulting in up to 14% smaller statistical uncertainties compared to simply reducing the survey area by the masked area. We show that, even in the presence of large survey masks, the bias in cosmological parameter estimation produced in the forward-modeling process is ≈1%, dominated by bias caused by limited simulation volume. We also explore how this potential bias scales with survey area and evaluate how much small survey areas are impacted by the differences in cosmological structure in the data and simulated volumes, due to cosmic variance.

  15. Threshold selection for regional peaks-over-threshold data

    NASA Astrophysics Data System (ADS)

    Roth, Martin; Jongbloed, Geurt; Adri Buishand, T.

    2016-04-01

    A hurdle in the peaks-over-threshold approach for analyzing extreme values is the selection of the threshold. A method is developed to reduce this obstacle in the presence of multiple, similar data samples. This is for instance the case in many environmental applications. The idea is to combine threshold selection methods into a regional method. Regionalized versions of the threshold stability and the mean excess plot are presented as graphical tools for threshold selection. Moreover, quantitative approaches based on the bootstrap distribution of the spatially averaged Kolmogorov-Smirnov and Anderson-Darling test statistics are introduced. It is demonstrated that the proposed regional method leads to an increased sensitivity for too low thresholds, compared to methods that do not take into account the regional information. The approach can be used for a wide range of univariate threshold selection methods. We test the methods using simulated data and present an application to rainfall data from the Dutch water board Vallei en Veluwe.

  16. Peptidomic profile of milk of Holstein cows at peak lactation

    PubMed Central

    Dallas, David C.; Guerrero, Andres; Parker, Evan A.; Garay, Luis A.; Bhandari, Aashish; Lebrilla, Carlito B.; Barile, Daniela; German, J. Bruce

    2014-01-01

    Bovine milk is known to contain naturally occurring peptides, but relatively few of their sequences have been determined. Human milk contains hundreds of endogenous peptides and the ensemble has been documented for antimicrobial actions. Naturally occurring peptides from bovine milk were sequenced and compared with human milk peptides. Bovine milk samples from six cows in second stage peak lactation at 78–121 days post- partum revealed 159 peptides. Most peptides (73%) were found in all six cows sampled, demonstrating the similarity of the intra-mammary peptide degradation across these cows. One peptide sequence, ALPIIQKLEPQIA from bovine perilipin 2 was identical to another found in human milk. Most peptides derived from β-casein, αs1-casein and αs2- casein. No peptides derived from abundant bovine milk proteins like lactoferrin, β- lactoglobulin and secretory immunoglobulin A. The enzymatic cleavage analysis revealed that milk proteins were degraded by plasmin, cathepsins B and D and elastase in all samples. PMID:24344900

  17. Satisfying winter peak-power demand with phased gasification

    SciTech Connect

    Hall, E.H.; Moss, T.E.; Ravikumar, R.

    1987-01-01

    The purpose of this study, commissioned by the Bonneville Power Administration, was to investigate application of this concept to the Pacific Northwest. Coal gasification combined-cycle (GCC) plants are receiving serious attention from eastern utilities. Potomac Electric (PEPCO) has engaged Fluor Technology to perform conceptual and preliminary engineering for a nominal 375-MW coal GCC power generation facility to be located in northern Montgomery County, Maryland. Other eastern utilities are engaged in site-specific investigations of satisfying future power requirements employing this alternative, which involves an environmentally superior method of using coal. Coal is combined with oxygen to produce a medium-heating-value fuel gas as an alternative to natural gas. The fuel gas, cleaned to remove sulfur compounds, is burned in gas turbine-generator sets. The hot exhaust gas is used to generate steam for additional power generation. The gasification combined cycle plant is highly efficient and has a high level of flexibility to meet power demands. This study provided background for consideration of one alternative for satisfying winter peak-load demand. The concept is feasible, depending on the timing of the installation of the gasification system, projections of the cost and the availability of natural gas, and restrictions on the use of natural gas. It has the advantage of deferring capacity addition and capital outlay until power is needed and economics are favorable.

  18. Peak luminosity correlated low-frequency oscillations in black holes

    NASA Astrophysics Data System (ADS)

    Li, Z. B.; Gao, H. Q.; Zhang, Z.; Zhang, S.; Qu, J. L.; Zhang, C. M.; Song, L. M.

    2014-05-01

    Based on Rossi X-ray Timing Explorer (RXTE) observational data, we study the timing and spectral properties of some peculiar low-frequency (LF) quasi-periodic oscillations (QPOs), which have been found at the peak luminosity of the outburst of some transient black hole (BH) binaries: the 2005 outburst of GRO J1655-40, the 2003 outburst of H1743-322 and the 1998 outburst of XTE J1550-564. Appearing in the ultraluminous state, these QPOs from different sources show some common properties. The amplitude is very weak (less than 1 per cent) and the quality factor is larger than 6. Moreover, these QPOs (about several Hz) sometimes show up simultaneously with another QPO (about 10 Hz), but their frequencies are not harmonically related. We also find that the frequencies of these QPOs are inversely correlated with the mass of the BH, which implies that these QPOs might be correlated with the innermost stable circular orbit. The QPO frequency is also negative correlated with the inner disc radius among BHs. However, its frequency is too low to ascribe it to the Keperlian orbit frequency. Moreover, we discuss the physical origin of these QPOs and we suggest that they are not produced by the viscous variability of the inner disc either.

  19. Fracture Permeability Evolution in Desert Peak Quartz Monzonite

    SciTech Connect

    Carlson, S R; Roberts, J J; Detwiler, R L; Viani, B E; Roberts, S K

    2005-05-10

    Fracture flow experiments are being conducted on quartz monzonite core from the Desert Peak East EGS site, Churchill County, Nevada. The flow experiments are conducted at temperatures of 167-169 C and 5.5 MPa confining pressure through artificial fractures. Two injection fluids, a saline solution and a silica-bearing solution, have been used to date. Flow rates are typically 0.02 mL/min, but other rates have been used. The fracture surfaces are characterized with a contact profilometer. The profilometry data demonstrate that it is possible to fabricate statistically similar fracture surfaces and enable us to map aperture variations, which we use in numerical simulations. Effluent samples are collected for chemical analysis. The fluid pressure gradient is measured across the specimen and effective hydraulic apertures are calculated. The experiments show a reduction in permeability over time for both injection fluids, but a more rapid loss of permeability was observed for the silica-bearing solution. The calculated hydraulic aperture is observed to decrease by 17% for the saline solution and 75% for the silica-bearing fluid, respectively. Electrical resistivity measurements, which are sensitive to the ionic content of the pore fluid, provide additional evidence of fluid-rock interactions.

  20. Peak power prediction of a vanadium redox flow battery

    NASA Astrophysics Data System (ADS)

    Yu, V. K.; Chen, D.

    2014-12-01

    The vanadium redox flow battery (VRFB) is a promising grid-scale energy storage technology, but future widespread commercialization requires a considerable reduction in capital costs. Determining the appropriate battery size for the intended power range can help minimize the amount of materials needed, thereby reducing capital costs. A physics-based model is an essential tool for predicting the power range of large scale VRFB systems to aid in the design optimization process. This paper presents a modeling framework that accounts for the effects of flow rate on the pumping losses, local mass transfer rate, and nonuniform vanadium concentration in the cell. The resulting low-order model captures battery performance accurately even at high power densities and remains computationally practical for stack-level optimization and control purposes. We first use the model to devise an optimal control strategy that maximizes battery life during discharge. Assuming optimal control is implemented, we then determine the upper efficiency limits of a given VRFB system and compare the net power and associated overpotential and pumping losses at different operating points. We also investigate the effects of varying the electrode porosity, stack temperature, and total vanadium concentration on the peak power.

  1. Risky intensity peaks resulting from nonlinear holographic imaging.

    PubMed

    Garanin, Sergey G; Epatko, Igor V; Istomin, Roman I; L'vov, Lev V; Malyutin, Alexander A; Serov, Rene V; Sukharev, Stanislaw A

    2011-07-20

    A study of the maximal intensity peaks due to nonlinear holographic images of obstacles such as obscurations or phase defects in a high-power laser system is presented. It is shown that the interference of the high-power plane wave and the converging image wave results in the formation of intensity maximums in the vicinity of the image plane, the values of which significantly exceed the intensity in the image plane itself. For round obstacles, analytical expressions that describe magnitudes and locations of the maxima depending on the radius and the type of obstacle are given. A procedure of numerical modeling that allows estimation of the influence of beam size, medium thickness, type, size, and shape of obstacles onto the properties of nonlinear images is described. It is demonstrated that for a given combination of the nonlinear medium and the high-power beam parameters, there is an intrinsic size of obstacles that is most harmful for the laser system components. PMID:21772354

  2. The Poleward Migration of Tropical Cyclone Peak Intensity

    NASA Astrophysics Data System (ADS)

    Kossin, J. P.; Emanuel, K.; Vecchi, G. A.

    2014-12-01

    Temporally inconsistent and potentially unreliable global historical data hinder detection of trends in tropical cyclone metrics. This limits the confident evaluation of proposed linkages between observed trends in tropical cyclones and in the environment. Here we mitigate this difficulty by focusing on a metric that is comparatively insensitive to past data uncertainty, and we uncover a pronounced poleward migration in the average latitude where tropical cyclones have reached their peak intensities over the past 30 years. The poleward trends are evident in the global historical data in both the Northern and Southern Hemispheres with rates of 53 and 62 km per decade, respectively, and are statistically significant. When considered together, the trends in each hemisphere depict a global-average expansion of tropical cyclone activity away from the tropics at a rate of about 1° latitude per decade, which lies within the range of estimates of the independently-observed expansion of the tropics over this same period. The global migration remains evident and statistically significant under a formal data homogenization procedure and is unlikely to be a data artifact. The migration away from the tropics is apparently linked to marked changes in the mean meridional structure of environmental vertical wind shear and potential intensity and can be plausibly linked to tropical expansion (as related to Hadley circulation expansion), which is generally thought to be driven largely by anthropogenic factors.

  3. [COPD und Klangtherapie: Pilotstudie zur Wirksamkeit einer Behandlung mit Körpertambura bei COPD-Patienten].

    PubMed

    Hartwig, Bernhard; Schmidt, Stefan; Hartwig, Isabella

    2016-01-01

    Hintergrund: Erkrankungen der Atemorgane treten mit steigendem Alter öfter auf, nehmen weltweit zu und sind häufige Ursachen für Morbidität und Mortalität. In dieser Pilotstudie wurde der Frage nachgegangen, ob eine einmalige 10-minütige Behandlung mit einer Körpertambura eine signifikante und effektive Verbesserung der Lungenfunktion von Patienten mit chronisch-obstruktiver Lungenerkrankung (COPD; GOLD-Stadium A oder B) erbringen kann. Patienten und Methoden: 54 Probanden konnten je zur Hälfte in eine Behandlungsgruppe (Körpertambura) und eine aktive Kontrollgruppe (Atemtherapie) randomisiert werden. Eine Bestimmung der Lungenfunktionsmessparameter «Einsekundenkapazität» (FEV1) und «inspiratorische Vitalkapazität» (IVC) zu den Zeitpunkten T1 (Baseline), T2 (direkt nach Behandlung) und als Follow-up etwa 3 Wochen nach T1 (T3). Ergebnisse: Die Behandlungsgruppe zeigte sich der Kontrollgruppe in beiden Werten signifikant überlegen. Die Zeit-×-Gruppe-Interaktion (Varianzanalyse) ergab p = 0,001 (FEV1) bzw. p = 0,04 (IVC). Die Behandlungsgruppe zeigte bei beiden Werten eine Verbesserung von klinischer Relevanz. Schlussfolgerung: Diese Ergebnisse zeigen, dass die Klangbehandlung mittels einer Körpertambura - neben den schulmedizinischen, leitliniengerechten Therapien - eine zusätzliche, nebenwirkungsarme, aber durchaus klinisch wirksame Option für die Behandlung von COPD-Patienten darstellen kann, um deren Lebensqualität zu stabilisieren und zu verbessern. PMID:27606616

  4. A method for estimating peak and time of peak streamflow from excess rainfall for 10- to 640-acre watersheds in the Houston, Texas, metropolitan area

    USGS Publications Warehouse

    Asquith, William H.; Cleveland, Theodore G.; Roussel, Meghan C.

    2011-01-01

    Estimates of peak and time of peak streamflow for small watersheds (less than about 640 acres) in a suburban to urban, low-slope setting are needed for drainage design that is cost-effective and risk-mitigated. During 2007-10, the U.S. Geological Survey (USGS), in cooperation with the Harris County Flood Control District and the Texas Department of Transportation, developed a method to estimate peak and time of peak streamflow from excess rainfall for 10- to 640-acre watersheds in the Houston, Texas, metropolitan area. To develop the method, 24 watersheds in the study area with drainage areas less than about 3.5 square miles (2,240 acres) and with concomitant rainfall and runoff data were selected. The method is based on conjunctive analysis of rainfall and runoff data in the context of the unit hydrograph method and the rational method. For the unit hydrograph analysis, a gamma distribution model of unit hydrograph shape (a gamma unit hydrograph) was chosen and parameters estimated through matching of modeled peak and time of peak streamflow to observed values on a storm-by-storm basis. Watershed mean or watershed-specific values of peak and time to peak ("time to peak" is a parameter of the gamma unit hydrograph and is distinct from "time of peak") of the gamma unit hydrograph were computed. Two regression equations to estimate peak and time to peak of the gamma unit hydrograph that are based on watershed characteristics of drainage area and basin-development factor (BDF) were developed. For the rational method analysis, a lag time (time-R), volumetric runoff coefficient, and runoff coefficient were computed on a storm-by-storm basis. Watershed-specific values of these three metrics were computed. A regression equation to estimate time-R based on drainage area and BDF was developed. Overall arithmetic means of volumetric runoff coefficient (0.41 dimensionless) and runoff coefficient (0.25 dimensionless) for the 24 watersheds were used to express the rational

  5. Gebändigtes Knallgas: Brennstoffzellen im mobilen und stationären Einsatz

    NASA Astrophysics Data System (ADS)

    Waidhas, Manfred; Landes, Harald

    2001-07-01

    Die Brennstoffzelle hat aus technischer Sicht einen hohen Stand erreicht. Die PEMFC konnte ihre Zuverlässigkeit in einer Reihe von Nischenanwendungen, aber auch in Form erster mobiler und dezentraler Prototypen beweisen. Die SOFC und die MCFC konnten bereits in Anlagen von 100 kW und mehr in Erprobung gehen. Um jedoch wirtschaftlich konkur-renzfähig zu den etablierten Technologien der mobilen und dezentralen Energiewandlung zu werden, muss noch eine drastische Kostenreduktion sowohl beim Brennstoffzellen-Stack als auch bei den zu seinem Betrieb notwendigen Hilfsaggregaten erreicht werden. Für Fahrzeugantriebe muss außerdem eine Antwort auf die noch offene Treibstofffrage (Infrastruktur, H2-Erzeugung und H2-Speicherung) gefunden werden.

  6. Umsetzung von CE-Prozessen durch neue Methoden und interaktive 3-D-Modelle

    NASA Astrophysics Data System (ADS)

    Lange, Andrea; Schulz, Torsten; Szymanski, Hans

    Innerhalb der EU gelten einheitliche Anforderungen an die Gestaltung von Maschinen, die in Form von grundlegenden Sicherheits- und Gesundheitsschutzanforderungen in der Maschinenrichtlinie (MaschRL) formuliert sind. Ihre Einhaltung dokumentiert der Hersteller mit der Konformitätserklärung und der Vergabe des CE-Zeichens. Die Maschinenrichtlinie ist ein Element des 1985 von der Europäischen Gemeinschaft (EG) beschriebenen "New Approach“ Rechtsetzungsmodells, das technologische Innovation ermöglicht und die Wettbewerbsfähigkeit der europäischen Industrie regelt. Es wurde erschaffen, um technische Handelshemmnisse im europäischen Binnenmarkt zu beseitigen und ein einheitliches Niveau hinsichtlich der Sicherheit der Produkte und dem Gesundheits- bzw. Verbraucherschutz zu gewährleisten. Alle Produkt-Richtlinien der EG, die später auf Grundlage des New Approach entstanden sind, weisen eine einheitliche Vorgehensweise auf, mit der diese Ziele erreicht werden sollen (VDI Verlag 11/2008).

  7. Annual Peak-Flow and Peak Dam-Pool-Elevation Frequency Characteristics of Selected Dry Dams in the Great Miami River Basin, Ohio

    USGS Publications Warehouse

    Koltun, G.F.

    2009-01-01

    This report describes the results of a study to determine frequency characteristics of post-regulation annual peak flows at streamflow-gaging stations near the Taylorsville, Huffman, and Germantown dry dams in the Miami Conservancy District flood-protection system (southwestern Ohio), and of annual peak elevations of the corresponding dam pools. Log-Pearson Type III distributions were fit to annual peak flow values for the period 1921 or 1922 through 2007 (the most recent year of published peak flow values at the time of this analysis) and annual peak dam-pool storage values for the period 1922- 2008 to determine peaks with recurrence intervals of 2, 5, 10, 25, 50, 100, 200, and 500 years. Once storages had been estimated for the various recurrence intervals, corresponding dam-pool elevations were determined from elevation-storage ratings provided by the Miami Conservancy District.

  8. Origin of low-temperature shoulder internal friction peak of Snoek-Köster peak in a medium carbon high alloyed steel

    NASA Astrophysics Data System (ADS)

    Lu, Xianwen; Jin, Mingjiang; Zhao, Hongshan; Li, Wei; Jin, Xuejun

    2014-10-01

    A distinct internal friction peak located at the low-temperature shoulder of Snoek-Köster peak (LTS-SK) was found in Fe-0.39C-9.8Ni-1.56Si-2.0Mn steel and its evolution with respect to various aging treatments was investigated. The LTS-SK internal friction peak was found to occur when aged below 373 K. TEM observation confirmed that the ε-carbide precipitated beyond 373 K, providing an evidence that the LTS-SK peak cannot be caused by ε-carbide precipitation. The corresponding evolution on the S-K peak and thermoelectric power (TEP) illustrated that the carbon content in the solid solution decreases due to carbon atoms segregation on the surrounding dislocations during low-temperature aging. The origin of the LTS-SK peak is likely attributed to the interaction between the carbon atoms and twin boundaries in martensite.

  9. Hubbert's Peak, The Coal Question, and Climate Change

    NASA Astrophysics Data System (ADS)

    Rutledge, D.

    2008-12-01

    The United Nations Intergovernmental Panel on Climate Change (IPCC) makes projections in terms of scenarios that include estimates of oil, gas, and coal production. These scenarios are defined in the Special Report on Emissions Scenarios or SRES (Nakicenovic et al., 2000). It is striking how different these scenarios are. For example, total oil production from 2005 to 2100 in the scenarios varies by 5:1 (Appendix SRES Version 1.1). Because production in some of the scenarios has not peaked by 2100, this ratio would be comparable to 10:1 if the years after 2100 were considered. The IPCC says "... the resultant 40 SRES scenarios together encompass the current range of uncertainties of future GHG [greenhouse gas] emissions arising from different characteristics of these models ..." (Nakicenovic et al., 2000, Summary for Policy Makers). This uncertainty is important for climate modeling, because it is larger than the likely range for the temperature sensitivity, which the IPCC gives as 2.3:1 (Gerard Meehl et al., 2007, the Fourth Assessment Report, Chapter 10, Global Climate Projections, p. 799). The uncertainty indicates that we could improve climate modeling if we could make a better estimate of future oil, gas, and coal production. We start by considering the two major fossil-fuel regions with substantial exhaustion, US oil and British coal. It turns out that simple normal and logistic curve fits to the cumulative production for these regions give quite stable projections for the ultimate production. By ultimate production, we mean total production, past and future. For US oil, the range for the fits for the ultimate is 1.15:1 (225- 258 billion barrels) for the period starting in 1956, when King Hubbert made his prediction of the peak year of US oil production. For UK coal, the range is 1.26:1 for the period starting in 1905, at the time of a Royal Commission on coal supplies. We extend this approach to find fits for world oil and gas production, and by a regional

  10. Peak Ground Velocities for Seismic Events at Yucca Mountain, Nevada

    SciTech Connect

    K. Coppersmith; R. Quittmeyer

    2005-02-16

    This report describes a scientific analysis to bound credible horizontal peak ground velocities (PGV) for the repository waste emplacement level at Yucca Mountain. Results are presented as a probability distribution for horizontal PGV to represent uncertainties in the analysis. The analysis also combines the bound to horizontal PGV with results of ground motion site-response modeling (BSC 2004 [DIRS 170027]) to develop a composite hazard curve for horizontal PGV at the waste emplacement level. This result provides input to an abstraction of seismic consequences (BSC 2004 [DIRS 169183]). The seismic consequence abstraction, in turn, defines the input data and computational algorithms for the seismic scenario class of the total system performance assessment (TSPA). Planning for the analysis is documented in Technical Work Plan TWP-MGR-GS-000001 (BSC 2004 [DIRS 171850]). The bound on horizontal PGV at the repository waste emplacement level developed in this analysis complements ground motions developed on the basis of PSHA results. In the PSHA, ground motion experts characterized the epistemic uncertainty and aleatory variability in their ground motion interpretations. To characterize the aleatory variability they used unbounded lognormal distributions. As a consequence of these characterizations, as seismic hazard calculations are extended to lower and lower annual frequencies of being exceeded, the ground motion level increases without bound, eventually reaching levels that are not credible (Corradini 2003 [DIRS 171191]). To provide credible seismic inputs for TSPA, in accordance with 10 Code of Federal Regulations (CFR) 63.102(j) [DIRS 156605], this complementary analysis is carried out to determine reasonable bounding values of horizontal PGV at the waste emplacement level for annual frequencies of exceedance as low as 10{sup -8}. For each realization of the TSPA seismic scenario, the results of this analysis provide a constraint on the values sampled from the

  11. Variable Depth Bragg Peak Method for Single Event Effects Testing

    NASA Technical Reports Server (NTRS)

    Buchner, S.; Kanyogoro, N.; Foster, C.; O'Neill, P.

    2011-01-01

    Traditionally, accelerator SEE testing is accomplished by removing the tops of packages so that the IC chips are accessible to heavy ions. However, ICs in some advanced packages cannot be de-lidded so a different approach is used that involves grinding and/or chemically etching away part of the package and the chip from the back side. The parts are then tested from the back side with ions having sufficient range to reach the sensitive volume. More recently, the entire silicon substrate in an SOI/SRAM was removed, making it possible to use low-energy ions with shorter ranges. Where removal of part of the package is not possible, facilities at Michigan State, NASA Space Radiation Laboratory, GANIL (France) and GSI (Germany) offer high-energy heavy ions with long ranges so that the ions can reach the devices' sensitive volumes without much change in the LET. Unfortunately, a run will typically involve only one ion species having a single energy and LET due to the long time it takes to tune a new energy. The Variable Depth Bragg Peak (VDBP) method is similar to the above method in that it involves the use of high-energy heavy ions that are able to pass through the packaging material and reach the device, obviating the need to remove the package. However, the method provides a broad range of LETs from a single ion by inserting degraders in the beam that modify the ion energy and, therefore, the LET. The crux of the method involves establishing a fiduciary point for degrader thickness, i.e., where the Bragg peak is located precisely at the sensitive volume in the device, for which the measured SEU cross-section and the ion LET are both also maxima and can be calculated using a Monte-Carlo program, TRIM. Once the fiduciary point has been established, calibrated high density polyethylene (HDPE) degraders are inserted into or removed from the beam to vary the ion LET at the device in a known manner. After each change of degrader thickness, the SEU cross-section is measured

  12. Nuclear Hydrogen for Peak Electricity Production and Spinning Reserve

    SciTech Connect

    Forsberg, C.W.

    2005-01-20

    Nuclear energy can be used to produce hydrogen. The key strategic question is this: ''What are the early markets for nuclear hydrogen?'' The answer determines (1) whether there are incentives to implement nuclear hydrogen technology today or whether the development of such a technology could be delayed by decades until a hydrogen economy has evolved, (2) the industrial partners required to develop such a technology, and (3) the technological requirements for the hydrogen production system (rate of production, steady-state or variable production, hydrogen purity, etc.). Understanding ''early'' markets for any new product is difficult because the customer may not even recognize that the product could exist. This study is an initial examination of how nuclear hydrogen could be used in two interconnected early markets: the production of electricity for peak and intermediate electrical loads and spinning reserve for the electrical grid. The study is intended to provide an initial description that can then be used to consult with potential customers (utilities, the Electric Power Research Institute, etc.) to better determine the potential real-world viability of this early market for nuclear hydrogen and provide the starting point for a more definitive assessment of the concept. If this set of applications is economically viable, it offers several unique advantages: (1) the market is approximately equivalent in size to the existing nuclear electric enterprise in the United States, (2) the entire market is within the utility industry and does not require development of an external market for hydrogen or a significant hydrogen infrastructure beyond the utility site, (3) the technology and scale match those of nuclear hydrogen production, (4) the market exists today, and (5) the market is sufficient in size to justify development of nuclear hydrogen production techniques independent of the development of any other market for hydrogen. These characteristics make it an ideal

  13. Implications of 'Peak Oil' for Atmospheric CO2 and Climate

    NASA Astrophysics Data System (ADS)

    Kharecha, P. A.; Hansen, J. E.

    2008-12-01

    Unconstrained CO2 emission from fossil fuel burning has been the dominant cause of observed anthropogenic global warming. The amounts of "proven" and potential fossil fuel reserves are uncertain and debated. Regardless of the true values, society has flexibility in the degree to which it chooses to exploit these reserves, especially unconventional fossil fuels and those located in extreme or pristine environments. If conventional oil production peaks within the next few decades, it may have a large effect on future atmospheric CO2 and climate change, depending upon subsequent energy choices. Assuming that proven oil and gas reserves do not greatly exceed estimates of the Energy Information Administration -- and recent trends are toward lower estimates -- we show that it is feasible to keep atmospheric CO2 from exceeding about 450 ppm by 2100, provided that emissions from coal, unconventional fossil fuels, and land use are constrained. Coal-fired facilities without sequestration must be phased out before midcentury to achieve this CO2 limit. It is also important to "stretch" conventional oil reserves via energy conservation and efficiency, thus averting strong pressures to extract liquid fuels from coal or unconventional fossil fuels while clean technologies are being developed for the era "beyond fossil fuels". We argue that a rising price on carbon emissions is needed to discourage conversion of the vast fossil resources into usable reserves, and to keep CO2 below 450 ppm. It is also plausible that CO2 can be returned below 350 ppm by 2100 or sooner, if more aggressive mitigation measures are enacted, most notably a phase-out of global coal emissions by circa 2030 and large- scale reforestation, primarily in the tropics but also in temperate regions.

  14. Peak exposures in aluminium potrooms: instrument development and field calibration.

    PubMed

    Carter, Stephanie R; Seixas, Noah S; Thompson, Mary Lou; Yost, Michael G

    2004-11-01

    Aluminium smelter potrooms are unique in that workplace exposures to hydrogen fluoride (HF), sulfur dioxide (SO2), and particulate matter occur simultaneously for some tasks. The peak exposures to these contaminants are of increasing interest in discovering the etiology of respiratory health effects. While a variety of direct-reading instruments are available for sulfur dioxide and particulate matter, only a few exist for hydrogen fluoride. The sensors in these HF instruments have a cross-sensitivity to sulfur dioxide making it difficult to monitor HF in an environment that also contains SO2. To overcome this problem, we assessed the simultaneous use of two electrochemical instruments: one with a SO2 sensor that does not respond to HF and the second with a hydrogen fluoride sensor that responds to both HF and SO2 in a 1 : 1 ratio, termed 'total acid gas'. The difference in the response between the two instruments should indicate the HF concentration: [HF + SO2] minus SO2 equals HF. The performance characteristics of this sampling train were evaluated in the laboratory through the generation of both HF and SO2 with permeation tubes. The response and recovery times for the SO2 only instrument were acceptable (6 and 15 s, respectively), but the "total acid gas" instrument exhibited both slow response and slow recovery approaching three and six min. The association between the traditional integrated filter sampling method and the direct-reading instrument for SO2 is 0.80 (Spearman's rho). The use of the digital filter strengthens the association between the HF direct-reading instrument and the integrated samples from 0.41 to 0.68. PMID:15536509

  15. FAST CONTRACTION OF CORONAL LOOPS AT THE FLARE PEAK

    SciTech Connect

    Liu Rui; Wang Haimin

    2010-05-01

    On 2005 September 8, a coronal loop overlying the active region NOAA 10808 was observed in TRACE 171 A to contract at {approx}100 km s{sup -1} at the peak of an X5.4-2B flare at 21:05 UT. Prior to the fast contraction, the loop underwent a much slower contraction at {approx}6 km s{sup -1} for about 8 minutes, initiating during the flare preheating phase. The sudden switch to fast contraction is presumably corresponding to the onset of the impulsive phase. The contraction resulted in the oscillation of a group of loops located below, with the period of about 10 minutes. Meanwhile, the contracting loop exhibited a similar oscillatory pattern superimposed on the dominant downward motion. We suggest that the fast contraction reflects a suddenly reduced magnetic pressure underneath due either to (1) the eruption of magnetic structures located at lower altitudes or to (2) the rapid conversion of magnetic free energy in the flare core region. Electrons accelerated in the shrinking trap formed by the contracting loop can theoretically contribute to a late-phase hard X-ray burst, which is associated with Type IV radio emission. To complement the X5.4 flare which was probably confined, a similar event observed in SOHO/EIT 195 A on 2004 July 20 in an eruptive, M8.6 flare is briefly described, in which the contraction was followed by the expansion of the same loop leading up to a halo coronal mass ejection. These observations further substantiate the conjecture of coronal implosion and suggest coronal implosion as a new exciter mechanism for coronal loop oscillations.

  16. Optical Parametric Amplification for High Peak and Average Power

    SciTech Connect

    Jovanovic, I

    2001-11-26

    Optical parametric amplification is an established broadband amplification technology based on a second-order nonlinear process of difference-frequency generation (DFG). When used in chirped pulse amplification (CPA), the technology has been termed optical parametric chirped pulse amplification (OPCPA). OPCPA holds a potential for producing unprecedented levels of peak and average power in optical pulses through its scalable ultrashort pulse amplification capability and the absence of quantum defect, respectively. The theory of three-wave parametric interactions is presented, followed by a description of the numerical model developed for nanosecond pulses. Spectral, temperature and angular characteristics of OPCPA are calculated, with an estimate of pulse contrast. An OPCPA system centered at 1054 nm, based on a commercial tabletop Q-switched pump laser, was developed as the front end for a large Nd-glass petawatt-class short-pulse laser. The system does not utilize electro-optic modulators or multi-pass amplification. The obtained overall 6% efficiency is the highest to date in OPCPA that uses a tabletop commercial pump laser. The first compression of pulses amplified in highly nondegenerate OPCPA is reported, with the obtained pulse width of 60 fs. This represents the shortest pulse to date produced in OPCPA. Optical parametric amplification in {beta}-barium borate was combined with laser amplification in Ti:sapphire to produce the first hybrid CPA system, with an overall conversion efficiency of 15%. Hybrid CPA combines the benefits of high gain in OPCPA with high conversion efficiency in Ti:sapphire to allow significant simplification of future tabletop multi-terawatt sources. Preliminary modeling of average power limits in OPCPA and pump laser design are presented, and an approach based on cascaded DFG is proposed to increase the average power beyond the single-crystal limit. Angular and beam quality effects in optical parametric amplification are modeled

  17. Peak CO2? China's Emissions Trajectories to 2050

    SciTech Connect

    Zhou, Nan; Fridley, David G.; McNeil, Michael; Zheng, Nina; Ke, Jing; Levine, Mark

    2011-05-01

    As a result of soaring energy demand from a staggering pace of economic growth and the related growth of energy-intensive industry, China overtook the United States to become the world's largest contributor to CO{sub 2} emissions in 2007. At the same time, China has taken serious actions to reduce its energy and carbon intensity by setting both short-term energy intensity reduction goal for 2006 to 2010 as well as long-term carbon intensity reduction goal for 2020. This study focuses on a China Energy Outlook through 2050 that assesses the role of energy efficiency policies in transitioning China to a lower emission trajectory and meeting its intensity reduction goals. In the past years, LBNL has established and significantly enhanced the China End-Use Energy Model based on the diffusion of end-use technologies and other physical drivers of energy demand. This model presents an important new approach for helping understand China's complex and dynamic drivers of energy consumption and implications of energy efficiency policies through scenario analysis. A baseline ('Continued Improvement Scenario') and an alternative energy efficiency scenario ('Accelerated Improvement Scenario') have been developed to assess the impact of actions already taken by the Chinese government as well as planned and potential actions, and to evaluate the potential for China to control energy demand growth and mitigate emissions. It is a common belief that China's CO{sub 2} emissions will continue to grow throughout this century and will dominate global emissions. The findings from this research suggest that this will not likely be the case because of saturation effects in appliances, residential and commercial floor area, roadways, railways, fertilizer use, and urbanization will peak around 2030 with slowing population growth. The baseline and alternative scenarios also demonstrate that the 2020 goals can be met and underscore the significant role that policy-driven energy efficiency

  18. Back-Up/ Peak Shaving Fuel Cell System

    SciTech Connect

    Staudt, Rhonda L.

    2008-05-28

    This Final Report covers the work executed by Plug Power from 8/11/03 – 10/31/07 statement of work for Topic 2: advancing the state of the art of fuel cell technology with the development of a new generation of commercially viable, stationary, Back-up/Peak-Shaving fuel cell systems, the GenCore II. The Program cost was $7.2 M with the Department of Energy share being $3.6M and Plug Power’s share being $3.6 M. The Program started in August of 2003 and was scheduled to end in January of 2006. The actual program end date was October of 2007. A no cost extension was grated. The Department of Energy barriers addressed as part of this program are: Technical Barriers for Distributed Generation Systems: o Durability o Power Electronics o Start up time Technical Barriers for Fuel Cell Components: o Stack Material and Manufacturing Cost o Durability o Thermal and water management Background The next generation GenCore backup fuel cell system to be designed, developed and tested by Plug Power under the program is the first, mass-manufacturable design implementation of Plug Power’s GenCore architected platform targeted for battery and small generator replacement applications in the telecommunications, broadband and UPS markets. The next generation GenCore will be a standalone, H2 in-DC-out system. In designing the next generation GenCore specifically for the telecommunications market, Plug Power is teaming with BellSouth Telecommunications, Inc., a leading industry end user. The final next generation GenCore system is expected to represent a market-entry, mass-manufacturable and economically viable design. The technology will incorporate: • A cost-reduced, polymer electrolyte membrane (PEM) fuel cell stack tailored to hydrogen fuel use • An advanced electrical energy storage system • A modular, scalable power conditioning system tailored to market requirements • A scaled-down, cost-reduced balance of plant (BOP) • Network Equipment Building Standards (NEBS), UL

  19. Geologic reconnaissance and geochemical sampling survey of molybdenum mineralization near Schiestler Peak, Temple Peak Quadrangle, Sublette County, Wyoming

    USGS Publications Warehouse

    Lee, G.K.; Antweiler, J.C.; Love, J.D.; Benedict, J.F.

    1982-01-01

    A brief geologic reconnaissance and geochemical survey of molybdenum mineralization near Schiestler Peak, Sublette County, Wyo., indicates that molybdenite occurs in this area as disseminations and blebs in granitic or quartz monzonitic rocks intruded by felsic dikes of similar composition. Samples of stream sediments, panned concentrates from stream sediments, soils, rocks, and water were collected in the geochemical survey. Analytical results show that in reconnaissance, panned concentrates are the best of the sample types used in this study to detect molybdenum mineralization. More detailed analysis of the distribution of the molybdenum is best achieved through the collection of rock samples. Hydrothermal alteration is generally not conspicuous in the study area; however, rock samples that contain molybdenite are usually slightly enriched in silver, copper, lead, and in several instances, gold. Conversely, there appear to be negative associations between molybdenum and zinc and between molybdenum and several of the rare-earth elements. Mo concentrations in the rock samples with no visible molybdenite range from undetectable at a sensitivity of 5 parts per million (ppm) to 700 ppm. Mo content in rock samples containing visible molybdenite ranges from 10 ppm to greater than 2,000 ppm. Stream-sediment values range from undetected to 15 ppm; panned concentrates from undetected to 15 ppm; soils from undetected to 20 ppm. Analyses of the water samples indicate Mo concentrations from 0.8 parts per billion (ppb) to 4.8 ppb. As currently understood, this deposit is not extensive or continuous, but drilling to provide information on the vertical extent of mineralization may alter this opinion.

  20. 40 CFR Appendix E to Part 75 - Optional NOX Emissions Estimation Protocol for Gas-Fired Peaking Units and Oil-Fired Peaking Units

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Optional NOX Emissions Estimation Protocol for Gas-Fired Peaking Units and Oil-Fired Peaking Units E Appendix E to Part 75 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTINUOUS...

  1. Mountain substitutability and peak load pricing of high alpine peaks as a management tool to reduce environmental damage: a contingent valuation study.

    PubMed

    Loomis, John B; Keske, Catherine M

    2009-04-01

    High alpine peaks throughout the world are under increasing environmental pressure from hikers, trekkers, and climbers. Colorado's "Fourteeners", peaks with summits above 14,000 feet are no exception. Most of these peaks have no entrance fees, and reach ecological and social carrying capacity on weekends. This paper illustrates how a series of dichotomous choice contingent valuation questions can be used to evaluate substitutability between different alpine peaks and quantify the price responsiveness to an entrance fee. Using this approach, we find that peak load pricing would decrease use of popular Fourteeners in Colorado by 22%. This reduction is due almost entirely to substitution, rather than income effects. There is also price inelastic demand, as 60% of the hikers find no substitution for their specific Fourteener at the varying cost increases posed in the survey. The no substitute group has a mean net benefit of $294 per hiker, per trip, considerably higher than visitor net benefits in most recreational use studies. PMID:19111965

  2. Peak data for U.S. Geological Survey gaging stations, Texas network and computer program to estimate peak-streamflow frequency

    USGS Publications Warehouse

    Slade, R.M.; Asquith, W.H.

    1996-01-01

    About 23,000 annual peak streamflows and about 400 historical peak streamflows exist for about 950 stations in the surface-water data-collection network of Texas. These data are presented on a computer diskette along with the corresponding dates, gage heights, and information concerning the basin, and nature or cause for the flood. Also on the computer diskette is a U.S. Geological Survey computer program that estimates peak-streamflow frequency based on annual and historical peak streamflow. The program estimates peak streamflow for 2-, 5-, 10-, 25-, 50-, and 100-year recurrence intervals and is based on guidelines established by the Interagency Advisory Committee on Water Data. Explanations are presented for installing the program, and an example is presented with discussion of its options.

  3. Trends in flood peaks' magnitude and seasonality in European transects

    NASA Astrophysics Data System (ADS)

    Diamantini, Elena; Mallucci, Stefano; Allamano, Paola; Claps, Pierluigi; Laio, Francesco; Viglione, Alberto; Hall, Julia; Blöschl, Günter

    2015-04-01

    In the last decade floods seems to have lashed more and more European population, so that more accurate studies concerning flood events tendencies are needed. We present a work in which trends in flood peaks' magnitude and seasonality (in time and space) are analyzed at the European scale: in total 2055 and 4340 stations respectively for magnitude and seasonality are considered along transect lines including entire nations, ranging typically from north to south of Europe. The work is part of the ERC Project "Deciphering River Flood Change". Trend analysis of flood magnitudes is applied to time series longer than 40 years. We find that there is a cluster of stations with negative trends in flood magnitude around the alpine and perialpine area. Positive trends are more frequent in the valleys of the mid Europe. We also use quantile regressions to investigate the behaviour of the highest quantiles, corresponding to floods with the highest return period. The original database is further divided into four classes based on station elevation; the group of catchments between 500 and 1000 m a.s.l. has the most positive trends for the large quantiles. The analysis is further developed by considering the coefficient of variation in 10-years time windows covering the data; the possible presence of trends in the CV is investigated. The obtained results show that there is a global prevalence of positive trend in the CVs, in particular for stations between 500 and 1000 m a.s.l., demonstrating a tendency toward the increase of very large (and possibly very small) annual maxima. To better discriminate the above results we used quantile regressions, able to highlight the trend behaviour of the highest quantiles computed on flood time series, Moreover, the database is divided into four classes based on station elevation. Results show that the group of catchments between 500 and 1000 m a.s.l. has definite and positive trends for the large quantiles. A different branch of this study

  4. Wie verstehen Schülerinnen und Schüler den Begriff der Unendlichkeit?

    NASA Astrophysics Data System (ADS)

    Schimmöller, Tabea

    Wie Hilbert bereits feststellte, wirkt die Idee der Unendlichkeit, wie keine andere, schon seit Zeiten sehr anregend und fruchtbar auf den Verstand und bewegt das Gemüt der Menschen. Der Begriff der Unendlichkeit bedarf aber auch, wie kein anderer, der Aufklärung, denn mit ihm eröffnet sich ein weites Feld, welches nicht nur aus vielen verschiedenen Definitionen besteht, sondern auch aus völlig unterschiedlichen Disziplinen. Physiker suchen immer dringender nach einer "Theorie für Alles" oder einer "Weltformel", Kosmologen beschäftigen sich unter anderem mit der Ewigkeit des Universums, Theologen interessiert eher die Unendlichkeit Gottes, Philosophen diskutieren unter anderem Grenzfragen zwischen Naturwissenschaft und Philosophie und die Mathematiker versuchen den Paradoxien des Unendlichen einen Sinn zu geben. Und so wird ersichtlich, dass nichts abstrakter ist als das Unendliche: Obwohl die Unendlichkeit für die unterschiedlichsten Wissenschaften von großer Bedeutung ist, "[ist] in der Wirklichkeit das Unendliche nirgends zu finden, [egal] was für Erfahrungen und Beobachtungen und welcherlei Wissenschaft wir auch heranziehen".

  5. Peak groundwater depletion in the High Plains Aquifer, projections from 1930 to 2110.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Peak groundwater depletion from overtapping aquifers beyond recharge rates occurs as the depletion rate increases until a peak occurs followed by a decreasing trend as pumping equilibrates towards available recharge. The logistic equation of Hubbert’s study of peak oil is used to project measurement...

  6. Peak Stripping Methodology for Plutonium Analysis in the Presence of Neptunium

    SciTech Connect

    Hodge, Christ

    2005-05-17

    Quantitative Plutonium analysis depends upon the accurate identification of the assay peak. The Np[Pa] equilibrium pair introduces interfering peaks in {sup 239}Pu, {sup 238}Pu, and {sup 235}U assay peak region. When an interfering peak is present, it negates the assay unless an appropriate technique can be developed to deal with the interference. Peak Stripping is one such technique. Peak stripping involves an algorithm to strip an entire peak from another, resulting in a spectrum that can then be analyzed for the isotope of interest. A simpler method is a ''pseudo-peak-stripping'' whereby the effects of the interfering peak are quantified and those effects are stripped from the assay data. In this case the integrated peak areas are analyzed and corrected. There are two methods presented in this paper. Both assimilate the integrated data for the assay peak regions (in this case {sup 238}Pu, {sup 239}Pu, and {sup 235}U) and for the Neptunium/Protactinium secular equilibrium pair (Np[Pa]). Using Np[Pa] assumes that the Protactinium has come to equilibrium with Neptunium. This requires only {approx}6 months from the time chemical purification. Therefore it is a valid assumption in most cases. A correction is then applied to the assay peak areas to ''strip'' the underlying effects of Np[Pa].

  7. 75 FR 15456 - Notice of Availability for the Signal Peak Energy, LLC, Federal Coal Lease Application...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-29

    ... Bureau of Land Management Notice of Availability for the Signal Peak Energy, LLC, Federal Coal Lease... management regulations, the Signal Peak Energy Coal Lease by Application Environmental Assessment (EA) is... Market Value (FMV), and Maximum Economic Recovery (MER) of the coal resources for Signal Peak...

  8. A simple multi-scale Gaussian smoothing-based strategy for automatic chromatographic peak extraction.

    PubMed

    Fu, Hai-Yan; Guo, Jun-Wei; Yu, Yong-Jie; Li, He-Dong; Cui, Hua-Peng; Liu, Ping-Ping; Wang, Bing; Wang, Sheng; Lu, Peng

    2016-06-24

    Peak detection is a critical step in chromatographic data analysis. In the present work, we developed a multi-scale Gaussian smoothing-based strategy for accurate peak extraction. The strategy consisted of three stages: background drift correction, peak detection, and peak filtration. Background drift correction was implemented using a moving window strategy. The new peak detection method is a variant of the system used by the well-known MassSpecWavelet, i.e., chromatographic peaks are found at local maximum values under various smoothing window scales. Therefore, peaks can be detected through the ridge lines of maximum values under these window scales, and signals that are monotonously increased/decreased around the peak position could be treated as part of the peak. Instrumental noise was estimated after peak elimination, and a peak filtration strategy was performed to remove peaks with signal-to-noise ratios smaller than 3. The performance of our method was evaluated using two complex datasets. These datasets include essential oil samples for quality control obtained from gas chromatography and tobacco plant samples for metabolic profiling analysis obtained from gas chromatography coupled with mass spectrometry. Results confirmed the reasonability of the developed method. PMID:27207578

  9. Was leistet ein Sportler? Kraft, Leistung und Energie im Muskel

    NASA Astrophysics Data System (ADS)

    Thaller, Sigrid; Mathelitsch, Leopold

    2006-01-01

    Der Leistungsbegriff ist im Sport weiter gefasst als in der Physik. In beiden Fällen liegt der Fokus jedoch auf einer pro Zeiteinheit erfolgten Energieumsetzung. Allerdings gibt die rein physikalische Leistung nicht immer Auskunft über den Energieumsatz der Muskeln. Die Muskelkraft hängt von der Kontraktionsgeschwindigkeit des Muskels ab. Ein Muskel verhält sich also anders als eine Feder. Für den Hochleistungssport müssen die Energieumsätze der Muskeln durch spezielle Trainings- und Nahrungsprogramme optimiert werden.

  10. Kernschmelze Der nachhaltige Einfluss von Nuklearwaffen auf Politik und Wirtschaft

    NASA Astrophysics Data System (ADS)

    Greiner, Bernd

    "Was sollen wir von einer Kultur halten, der die Ethik stets als wesentliches Element des menschlichen Lebens galt, die aber - außer in fachlicher oder spieltheoretischer Terminologie - nicht in der Lage war, über die Möglichkeit zu sprechen, nahezu alle Menschen zu töten?" Der Fragesteller gehört zu den berühmtesten Physikern des 20. Jahrhunderts und zu den nach wie vor Umstrittensten. über ihn wurde in den 1960er Jahren ein international viel beachtetes Theaterstück geschrieben, vor wenigen Jahren gar eine Oper.

  11. Zu einer inhaltsorientierten Theorie des Lernens und Lehrens der biologischen Evolution

    NASA Astrophysics Data System (ADS)

    Wallin, Anita

    Der Zweck dieser Studie (zwecks Überblick siehe dazu Abb. 9.1) war zu untersuchen, wie die Schüler der Sekundarstufe II ein Verständnis von der Theorie der biologischen Evolution entwickeln. Vom Ausgangspunkt "Vorurteile der Schüler“ ausgehend wurden Unterrichtssequenzen entwickelt und drei verschiedene Lernexperimente in einem zyklischen Prozess durchgeführt. Das Wissen der Schüler wurde vor, während und nach den Unterrichtssequenzen mit Hilfe von schriftlichen Tests, Interviews und Diskussionsrunden in kleinen Gruppen abgefragt. Etwa 80 % der Schüler hatten vor dem Unterricht alternative Vorstellungen von Evolution, und in dem Nachfolgetest erreichten circa 75 % ein wissenschaftliches Niveau. Die Argumentation der Schüler in den verschiedenen Tests wurde sorgfältig unter Rücksichtnahme auf Vorurteile, der konzeptionellen Struktur der Theorie der Evolution und den Zielen des Unterrichts analysiert. Daraus konnten Einsichten in solche Anforderungen an Lehren und Lernen gewonnen werden, die Herausforderungen an Schüler und Lehrer darstellen, wenn sie anfangen, evolutionäre Biologie zu lernen oder zu lehren. Ein wichtiges Ergebnis war, dass das Verständnis existierender Variation in einer Population der Schlüssel zum Verständnis von natürlicher Selektion ist. Die Ergebnisse sind in einer inhaltsorientierten Theorie zusammengefasst, welche aus drei verschiedenen Aspekten besteht: 1) den inhaltsspezifischen Aspekten, die einzigartig für jedes wissenschaftliche Feld sind; 2) den Aspekten, die die Natur der Wissenschaft betreffen; und 3) den allgemeinen Aspekten. Diese Theorie kann in neuen Experimenten getestet und weiter entwickelt werden.

  12. Peak Oil, Peak Water, Peak Education

    ERIC Educational Resources Information Center

    Coburn, Thomas B.

    2013-01-01

    This chapter argues that today's dominant forms of education are insufficient for today's world because they ignore the vast and conventionally untapped resource that lies in the disciplined inwardness that is contemplative life. It then surveys a range of transformative examples that are emerging in the educational movement known as…

  13. Charakterisierung von Sulfotransferasen im Gastrointestinaltrakt von Mensch und Ratte und Aktivierung von Promutagenen in V79-Zellen, die eine intestinale Form (1B1) des Menschen und der Ratte exprimieren

    NASA Astrophysics Data System (ADS)

    Teubner, Wera

    2001-05-01

    Die Ausstattung der gastrointestinalen Mukosa des Menschen und der Ratte mit Sulfotransferasen wurde mit Hilfe von Immunodetektion und Enzymaktivitätsmessungen untersucht. In Proben aus Colon und Rektum von 39 Personen wurden die Formen h1A1, h1A3 und h1B1 identifiziert, wobei in einer weiteren Probe, die als einzige von einem an Colitis Ulcerosa erkrankten Patienten stammte, keine Sulfotransferasen nachgewiesen werden konnten. Bei der Immunblot-Analyse war das Expressionsmuster der einzelnen Formen in allen Proben ähnlich. In wenigen Proben waren die relativen Signalintensitäten der h1A1 und der h1B1 um die Hälfte erniedrigt. Der Gehalt von SULT an zytosolischem Protein zeigte einen bis zu 8 - 10fachen Unterschied, er betrug jedoch bei zwei Dritteln der Proben zwischen 0,15 und 0,3 (h1A1 und h1A3) bzw. 0,6 und 0,8 Promille (h1B1). Die Variation konnte nicht auf Alter, Geschlecht oder Krankheitsbild der Patienten zurückgeführt werden. Auch der für die allelischen Varianten der h1A1 beschriebene Effekt auf die Enzymaktiviät bzw. Stabilität konnte in der Menge an immunreaktivem Protein nicht in diesem Ausma detektiert werden. Die Allelhäufigkeit von h1A1*R und h1A1*H war gegenüber der gesunden Bevölkerung nicht verändert. In den sieben Proben aus dem Dünndarm (Coecum, viermal Ileum, Jejunum) konnten zusätzlich die Formen h1E1 und h2A1 identifiziert werden. Ein möglicherweise der Form h1C1 entsprechendes Protein wurde im Magen detektiert. Im Vergleich zum Menschen war die Expression in der Ratte stärker auf die Leber konzentriert. Während beim Menschen in allen untersuchten Abschnitten Sulfotransferasen in Mengen detektiert wurden, die in zwei Fällen (h1B1 und h1A3) sogar den Gehalt in der Leber überstiegen, beschränkte sich die Expression in der Ratte auf im Vergleich zur Leber geringe Mengen im Magen und Dickdarm. Nachgewiesen wurden die r1B1, r1A1 sowie eine nicht identifizierte Form von 35kD, bei der es sich vermutlich um die r1C2 handelt. Im

  14. Von Donuts und Zucker: Mit Neutronen biologische Makromoleküle erforschen

    NASA Astrophysics Data System (ADS)

    May, Roland P.

    2003-05-01

    Für die Erforschung von Biomolekülen bieten Neutronen einzigartige Eigenschaften. Vor allem ihre unterschiedliche Wechselwirkung mit dem natürlichen Wasserstoff und seinem schweren Isotop Deuterium ermöglicht tiefe Einblicke in Struktur, Funktion und Dynamik von Proteinen, Nukleinsäuren und Biomembranen. Bei vielen Fragestellungen zur Strukturaufklärung gibt es kaum oder keine Alternative zum Neutron. Das Institut Laue-Langevin trägt Bahnbrechendes zum Erfolg der Neutronen-Methoden in der Biologie bei.

  15. Dependence on neutron energy of neutron-induced peaks in Ge detectors

    NASA Astrophysics Data System (ADS)

    Gete, E.; Measday, David F.; Moftah, B. A.; Saliba, M. A.; Stocki, Trevor J.

    1997-02-01

    We have studied the peak shapes at 596 and 691 KeV resulting from fast neutron interactions inside germanium detectors. We have used neutrons from a 252Cf source, as well as from the 28Si((mu) -, nv), and 209Bi((pi) -, xn) reactions to compare the peaks and to check for any dependence of peak shape on the incoming neutron energy. In our investigation, no dependence of these peak shapes on the neutron energy spectra has been observed. In a comparison of these peak shapes with other studies we found similar results to ours except for monoenergetic neutron irradiations from 1 to 8 MeV.

  16. Anomalous satellite inductive peaks in alternating current response of defective carbon nanotubes

    SciTech Connect

    Hirai, Daisuke; Watanabe, Satoshi; Yamamoto, Takahiro

    2014-05-07

    AC response of defective metallic carbon nanotubes is investigated from first principles. We found that capacitive peaks appear at electron scattering states. Moreover, we show that satellite inductive peaks are seen adjacent to a main capacitive peak, which is in contrast to the conductance spectra having no satellite features. The appearance of satellite inductive peaks seems to depend on the scattering states. Our analysis with a simple resonant scattering model reveals that the origin of the satellite inductive peaks can be understood by just one parameter, i.e., the lifetime of electrons at a defect state.

  17. Peak-flow frequency for tributaries of the Colorado River downstream of Austin, Texas

    USGS Publications Warehouse

    Asquith, William H.

    1998-01-01

    Peak-flow frequency for 38 stations with at least 8 years of data in natural (unregulated and nonurbanized) basins was estimated on the basis of annual peak-streamflow data through water year 1995. Peak-flow frequency represents the peak discharges for recurrence intervals of 2, 5, 10, 25, 50, 100, 250, and 500 years. The peak-flow frequency and drainage basin characteristics for the stations were used to develop two sets of regression equations to estimate peak-flow frequency for tributaries of the Colorado River in the study area. One set of equations was developed for contributing drainage areas less than 32 square miles, and another set was developed for contributing drainage areas greater than 32 square miles. A procedure is presented to estimate the peak discharge at sites where both sets of equations are considered applicable. Additionally, procedures are presented to compute the 50-, 67-, and 90-percent prediction interval for any estimation from the equations.

  18. Suchmaschinen und Informationsqualität: Status quo, Problemfelder, Entwicklungstendenzen

    NASA Astrophysics Data System (ADS)

    Maaß, Christian; Gräfe, Gernot

    Das Thema Informationsqualität wird in den vorangegangenen Beiträgen umfangreich betrachtet. Die dabei geführte Diskussion zielt vordergründig auf organisatorische Dimensionen der Datenqualität, die strukturierte Datenanalyse oder Datenmanagementprozesse im Unternehmen ab. Dabei liegt ein Großteil der zur Unterstützung von Entscheidungsprozessen herangezogenen Informationen in Datenbanksystemen bzw. in einem Data Warehouse vor. Auf Basis verschiedener Analysetools (z. B. Online-Analytical-Processing) lassen sich diese Informationen dann systematisch auswerten. Allerdings können Entscheidungen nicht allein aufgrund der unternehmensintern vorliegenden Informationen getroffen werden. Vielmehr gilt es auch die aus der Unternehmensumwelt relevanten Informationen zu verarbeiten, die zum Teil über das Internet zugänglich sind. Im Gegensatz zu unternehmensinternen Datenbanksystemen handelt es sich beim Internet um ein schwach strukturiertes und offenes Netzwerk, weshalb die im Unternehmenskontext eingesetzten Analysetools kaum weiterhelfen, um Informationen mit hoher Qualität herauszufiltern. In dieser Situation spielen Suchmaschinen eine wichtige Rolle, um Informationen zu identifizieren und anhand verschiedener Kriterien in Form einer Suchergebnisseite zu sortieren.

  19. Organization of the und R chromosome region in maize

    SciTech Connect

    Kermicle, J.

    1989-07-01

    Maize is highly polymorphic in pattern of anthocyanin pigmentation. That portion of the total variation which is attributable to one gene is revealed when alleles from various sources are incorporated into a standard line by backcrossing before comparison under uniform environments. The variation associated with such collections of {und R} alleles is discontinuous, suggesting the presence of discrete units of function. Alleles comprising more than one such element constitute an allelic complex or gene family. An objective of the early years of investigation under this grant was to work out the arrangement of genic elements in such allelic complexes. Elements in a complex are identified by independent mutation and separability by recombination, the latter serving also to order them in the chromosome. Alleles having from one to three elements each were represented among five accessions of the colored-seed, colored-plant class ({und R-r}). Nine different genic elements were identified. This line of inquiry has been de-emphasized in recent years in deference to investigating the organization of individual genic elements. We have focused on a set of readily distinguished elements that were identified or produced in the analysis of allelic complexes. 7 refs., 1 tab.

  20. Systematic analysis of stutter percentages and allele peak height and peak area ratios at heterozygous STR loci for forensic casework and database samples.

    PubMed

    Leclair, Benoît; Frégeau, Chantal J; Bowen, Kathy L; Fourney, Ron M

    2004-09-01

    To assist the interpretation of STR DNA typing results from forensic casework samples containing mixtures, the range of heterozygous allele peak height and peak area ratios (HR) and stutter percentages (stutter %) for the loci comprised in the AmpFlSTR Profiler Plus (PP) kit were assessed on 468 database and 275 casework single source samples. Stutter % medians were similar for database and casework samples, ranging from 2% to 7%. The upper limit of the stutter value range was 16%, calculated as median +3 SD, although lower locus-specific values could be used. HR medians were 93 +/- 6.5% for database samples, 88 +/- 12% for casework samples. For casework samples, the maximum signal imbalance noted was 52%, calculated as median -3 SD. No significant difference was observed between peak height and peak area calculated values. This study shows the importance of selecting the proper reference database for the establishment of HR threshold values. PMID:15461097

  1. Elektrische Phänomene des Körpers und ihre Detektion

    NASA Astrophysics Data System (ADS)

    Bolz, Armin; Kikillus, Nicole; Moor, Claudius

    Im menschlichen Körper verfügen sowohl Nerven- als auch Muskelzellen über die Eigenschaft, intra- und extrazelluläre Ionenkonzentrationen zu verschieben und damit die Potenzialverteilung in ihrer Umgebung zu beeinflussen. Über unterschiedliche Synchronisationsverfahren sind makroskopische Zellverbände zusätzlich in der Lage, koordiniert ihre Felder zu verändern und somit auch signifikante, an der Körperoberfläche messbare elektrische Signale zu erzeugen. Das vorliegende Kapitel beschreibt zunächst die elektrophysiologischen Grundlagen elektrischer Signale des menschlichen Körpers, die Synchronisationsmechanismen und die daraus entstehenden Felder, insbesondere das Elektrokardiogramm (EKG), das Elektroenzephalogramm (EEG) sowie das Elektromyogramm (EMG). Im Anschluss daran werden die wesentlichen Grundlagen der Messtechnik zur Erfassung bioelektrischer Phänomene erläutert. Einige Beispielapplikationen runden diesen Beitrag ab.

  2. Zwischen Commonsense und Wissenschaft Mathematik in der Erziehungsphilosophie A. N. Whiteheads

    NASA Astrophysics Data System (ADS)

    Sölch, Dennis

    Obwohl Whitehead heute wie selbstverständlich als Philosoph rezipiert wird, so hat er seine wissenschaftliche Laufbahn doch als Mathematiker begonnen. Lange Zeit war er gemeinsam mit Bertrand Russell als Autor der Principia Mathematica unter Mathematikern und mathematischen Logikern deutlich besser bekannt als unter Philosophen. Doch selbst von denjenigen, die sich mit Whiteheads Überlegungen zur Metaphysik, zur Wissenschaftsgeschichte und zur Theologie befassen, werden seine Schriften zur Philosophie von Erziehung und Bildung häufig kaum beachtet. So entgeht es leicht, dass Whitehead nicht nur ein auf theoretischem Gebiet brillanter Mathematiker war, sondern sein theoretisches Fachwissen im Hinblick auf pädagogische und didaktische Relevanz fortwährend reflektiert hat.

  3. Jahre Entwicklung der Instandhaltung - von der ausfallorientierten Instandhaltung zum gemeinsamen TPM und RCM

    NASA Astrophysics Data System (ADS)

    Iske, Friedhelm

    Zur Einleitung meines Beitrages möchte ich von einem Gespräch mit einem Mitarbeiter berichten, das ich als junger Vorgesetzter einer Instandhaltungsgruppe 1988 führte. Der engagierte Mitarbeiter feierte damals sein vierzigjähriges Dienstjubiläum und war stolz auf das von ihm Geleistete sowie auf den besonderen Einsatz seiner Altersgruppe, die nach dem Zweiten Weltkrieg das Werk wieder aufgebaut hatte. Auf meine Frage, was denn damals die erste Aufgabe in der Firma war, bekam ich kurz und knapp und mit einer Selbstverständlichkeit die selbstbewusste Antwort: "Unser Pferd füttern und mit dem Pferd die innerbetrieblichen Transporte erledigen“. Als junger, technisch orientierter Vorgesetzter war ich über diese Antwort sehr überrascht. Gedanklich weit entfernt war die Vorstellung, dass in der Vergangenheit Transporte mit einem Pferd erledigt wurden.

  4. Modulare LDAP-Server-, -Protokoll und - Funktionserweiterungen am Beispiel von OpenLDAP

    NASA Astrophysics Data System (ADS)

    Pluta, Daniel

    In diesem Artikel wird ein Standardisierungsvorschlag für eine LDAP-Protokollerweiterung und deren Referenzimplementierung in Form einer modularen Erweiterung für die LDAP-Software-Suite des OpenLDAPProjektes vorgestellt. Nach einer Einführung in und einem Überblick über die wichtigsten OpenLDAP-Komponenten stellen wir unseren Lösungsansatz vor und gehen auf seine technischen Details ein. Ziel dieses Overlays ist die Implementierung einer neuen Funktionalität, die vom LDAP-Protokoll bisher nicht vorgesehen ist: Der Umfang der Suchergebnismenge soll serverseitig, dezentral und in der Granularität ganzer Objekte in Abhängigkeit von der aktuellen Serverzeit (konfigurierbar) eingeschränkt werden.

  5. Kosteneffiziente Honbearbeitung durch intelligente und flexible Verknüpfung von autarken Honzentren

    NASA Astrophysics Data System (ADS)

    Roth, Günther

    Die Planungsabteilungen in der Automobilindustrie werden vor immer größere Herausforderungen gestsellt. Der zur Verfügung stehende Zeitraum zu einer seriensicheren Umsetzung der entwicklungs- und produktionstechnischen Forderungen wird von Projekt zu Projekt kürzer. Aufgrund des hohen Wettbewerbsdrucks und daraus resultierenden erforderlichen Kostenoptimierungen, die schnelleren Timeto-market-und Innovationszyklen und die vermeintlich zur Kundenbindung erforderlichen, kaum mehr überschaubaren Diversifizierungen in den Modellpaletten lassen den Planungshorizont immer kürzer werden. Die zu beschaffenden Fertigungsanlagen sollen aber in den nächsten 8-12 Jahren all die Varianten produzieren können, die heute nur teilweise oder noch gar nicht bekannt sind.

  6. dTRPA1 Modulates Afternoon Peak of Activity of Fruit Flies Drosophila melanogaster

    PubMed Central

    Das, Antara; Holmes, Todd C.; Sheeba, Vasu

    2015-01-01

    Daily rhythms in Drosophila under semi-natural conditions (or SN) have received much recent attention. One of the striking differences in the behaviour of wild type flies under SN is the presence of an additional peak of activity in the middle of the day. This is referred to as the afternoon peak (A-peak) and is absent under standard laboratory regimes using gated light and temperature cues. Although previous reports identified the physical factors that contribute towards the A-peak there is no evidence for underlying molecular mechanisms or pathways that control A-peak. We report that the A-peak is mediated by thermosensitive dTRPA1 (drosophila Transient Receptor Potential- A1) ion channels as this peak is absent in dTRPA1 null mutants. Further, when natural cycles of light and temperature are simulated in the lab, we find that the amplitude of the A-peak is dTRPA1-dependent. Although a few circadian neurons express dTRPA1, we show that modulation of A-peak is primarily influenced by non-CRY dTRPA1 expressing neurons. Hence, we propose that A-peak of activity observed under SN is a temperature sensitive response in flies that is elicited through dTRPA1 receptor signalling. PMID:26226013

  7. RSAT peak-motifs: motif analysis in full-size ChIP-seq datasets.

    PubMed

    Thomas-Chollier, Morgane; Herrmann, Carl; Defrance, Matthieu; Sand, Olivier; Thieffry, Denis; van Helden, Jacques

    2012-02-01

    ChIP-seq is increasingly used to characterize transcription factor binding and chromatin marks at a genomic scale. Various tools are now available to extract binding motifs from peak data sets. However, most approaches are only available as command-line programs, or via a website but with size restrictions. We present peak-motifs, a computational pipeline that discovers motifs in peak sequences, compares them with databases, exports putative binding sites for visualization in the UCSC genome browser and generates an extensive report suited for both naive and expert users. It relies on time- and memory-efficient algorithms enabling the treatment of several thousand peaks within minutes. Regarding time efficiency, peak-motifs outperforms all comparable tools by several orders of magnitude. We demonstrate its accuracy by analyzing data sets ranging from 4000 to 1,28,000 peaks for 12 embryonic stem cell-specific transcription factors. In all cases, the program finds the expected motifs and returns additional motifs potentially bound by cofactors. We further apply peak-motifs to discover tissue-specific motifs in peak collections for the p300 transcriptional co-activator. To our knowledge, peak-motifs is the only tool that performs a complete motif analysis and offers a user-friendly web interface without any restriction on sequence size or number of peaks. PMID:22156162

  8. Double-peaked ion spectra in the lobe plasma - Evidence for massive ions. [in geomagnetic tail

    NASA Technical Reports Server (NTRS)

    Hardy, D. A.; Freeman, J. W.; Hills, H. K.

    1977-01-01

    Suprathermal Ion Detector Experiments (SIDE) have suggested the presence of a significant secondary peak in the ion distribution function during geomagnetic active periods when the moon is within the lobe plasma. It is observed that: (1) an increase in the primary peak bulk velocity is reflected in an increase in secondary peak bulk velocity, (2) both spectra are narrow in the instrument-look direction (assumed parallel to the flow) and peak temperatures are usually less than about 10 eV, (3) periods for double peak observations comprise about 10% of the total lobe plasma observation time, (4) assuming that peaks are caused by protons, and without correcting for lunar surface potential, primary peak bulk velocity is between about 70 and 160 km/s, and secondary peak bulk velocity is between about 360 and 840 km/s, and (5) assuming equal flow velocities outside the influence of the lunar surface potential are equal for the ions of the two peaks, and making corrections for this potential, secondary peak ions are consistent with N(+) or O(+), and the ratio of O(+) to proton number densities is usually less than about 2 x 10 to the -3rd.

  9. Contributions of Astronauts Aerobic Exercise Intensity and Time on Change in VO2peak during Spaceflight

    NASA Technical Reports Server (NTRS)

    Downs, Meghan E.; Buxton, Roxanne; Moore, Alan; Ploutz-Snyder, Robert; Ploutz-Snyder, Lori

    2014-01-01

    There is considerable variability among astronauts with respect to changes in maximal aerobic capacity (VO2peak) during International Space Station (ISS) missions, ranging from a 5% increase to 30% decline. Individual differences may be due to in-flight aerobic exercise time and intensity. PURPOSE: To evaluate the effects of in-flight aerobic exercise time and intensity on change in VO2peak during ISS missions. METHODS: Astronauts (N=11) performed peak cycle tests approx 60 days before flight (L-60), on flight day (FD) approx 14, and every approx 30 days thereafter. Metabolic gas analysis and heart rate (HR) were measured continuously during the test using the portable pulmonary function system. HR and duration of each in-flight cycle ergometer and treadmill (TM) session were recorded and averaged in time segments corresponding to each peak test. Mixed effects linear regression with exercise mode (TM or cycle) as a categorical variable was used to assess the contributions of exercise intensity (%time >70% peak HR or %time >90% peak HR) and time (min/wk), adjusted for body weight, on %change in VO2peak during the mission, and incorporating the repeated-measures experimental design. RESULTS: 110 observations were included in the model (4-6 peak cycle tests per astronaut, 2 exercise devices). VO2peak was reduced from preflight throughout the mission (FD14: 13+/-13% and FD 105: 8+/-10%). Exercise intensity (%peak HR: FD14=66+/-14; FD105=75+/-8) and time (min/wk: FD14=82+/-46; FD105=158+/-40) increased during flight. The models showed main effects for exercise time and intensity with no interactions between time, intensity, and device (70% peak HR: time [z-score=2.39; P=0.017], intensity [z-score=3.51; P=0.000]; 90% peak HR: time [zscore= 3.31; P=0.001], intensity [z-score=2.24; P=0.025]). CONCLUSION: Exercise time and intensity independently contribute to %change in VO2peak during ISS missions, indicating that there are minimal values for exercise time and intensity

  10. Schönheit und andere Provokationen - Eine neue evolutionsbiologische Theorie der Kunst

    NASA Astrophysics Data System (ADS)

    Junker, Thomas

    Die Evolution hat viele spektakuläre Phänomene hervorgebracht - von der Eleganz des Vogelflugs über die gigantischen Körper der Dinosaurier und die farbenprächtige Vielfalt der Korallenriffe bis hin zu ihrem jüngsten Geniestreich - der menschlichen Kunst. Die schönen Künste - Malerei, Bildhauerei und Architektur, Theater, Tanz, Oper und Filmkunst, Musik und Literatur - Produkte der Evolution? Diese Vorstellung mutet vielen Menschen fremd an, aber wie könnte es anders sein? Denn wenn Charles Darwin recht hat, dann sind nicht nur die körperlichen Merkmale der Menschen als Antworten auf die Erfordernisse des Lebens entstanden, sondern auch ihre geistigen Fähigkeiten und Verhaltensweisen. Im Jahr 1859 hatte er auf den letzten Seiten seines berühmten Buches über die Entstehung der Arten eine kühne Prophezeiung gemacht: Durch die Evolutionstheorie werde es "zu einer bemerkenswerten Revolution in der Naturwissenschaft kommen […]. Die Psychologie wird auf die neue Grundlage gestellt, dass jede geistige Kraft und Fähigkeit notwendigerweise durch graduelle Übergänge erworben wird“ (Darwin 1859, S. 484, 488; Junker 2008).

  11. Offset-free rail-to-rail derandomizing peak detect-and-hold circuit

    DOEpatents

    DeGeronimo, Gianluigi; O'Connor, Paul; Kandasamy, Anand

    2003-01-01

    A peak detect-and-hold circuit eliminates errors introduced by conventional amplifiers, such as common-mode rejection and input voltage offset. The circuit includes an amplifier, three switches, a transistor, and a capacitor. During a detect-and-hold phase, a hold voltage at a non-inverting in put terminal of the amplifier tracks an input voltage signal and when a peak is reached, the transistor is switched off, thereby storing a peak voltage in the capacitor. During a readout phase, the circuit functions as a unity gain buffer, in which the voltage stored in the capacitor is provided as an output voltage. The circuit is able to sense signals rail-to-rail and can readily be modified to sense positive, negative, or peak-to-peak voltages. Derandomization may be achieved by using a plurality of peak detect-and-hold circuits electrically connected in parallel.

  12. A non-parametric peak calling algorithm for DamID-Seq.

    PubMed

    Li, Renhua; Hempel, Leonie U; Jiang, Tingbo

    2015-01-01

    Protein-DNA interactions play a significant role in gene regulation and expression. In order to identify transcription factor binding sites (TFBS) of double sex (DSX)-an important transcription factor in sex determination, we applied the DNA adenine methylation identification (DamID) technology to the fat body tissue of Drosophila, followed by deep sequencing (DamID-Seq). One feature of DamID-Seq data is that induced adenine methylation signals are not assured to be symmetrically distributed at TFBS, which renders the existing peak calling algorithms for ChIP-Seq, including SPP and MACS, inappropriate for DamID-Seq data. This challenged us to develop a new algorithm for peak calling. A challenge in peaking calling based on sequence data is estimating the averaged behavior of background signals. We applied a bootstrap resampling method to short sequence reads in the control (Dam only). After data quality check and mapping reads to a reference genome, the peaking calling procedure compromises the following steps: 1) reads resampling; 2) reads scaling (normalization) and computing signal-to-noise fold changes; 3) filtering; 4) Calling peaks based on a statistically significant threshold. This is a non-parametric method for peak calling (NPPC). We also used irreproducible discovery rate (IDR) analysis, as well as ChIP-Seq data to compare the peaks called by the NPPC. We identified approximately 6,000 peaks for DSX, which point to 1,225 genes related to the fat body tissue difference between female and male Drosophila. Statistical evidence from IDR analysis indicated that these peaks are reproducible across biological replicates. In addition, these peaks are comparable to those identified by use of ChIP-Seq on S2 cells, in terms of peak number, location, and peaks width. PMID:25785608

  13. Improved Peak Detection and Deconvolution of Native Electrospray Mass Spectra from Large Protein Complexes

    NASA Astrophysics Data System (ADS)

    Lu, Jonathan; Trnka, Michael J.; Roh, Soung-Hun; Robinson, Philip J. J.; Shiau, Carrie; Fujimori, Danica Galonic; Chiu, Wah; Burlingame, Alma L.; Guan, Shenheng

    2015-12-01

    Native electrospray-ionization mass spectrometry (native MS) measures biomolecules under conditions that preserve most aspects of protein tertiary and quaternary structure, enabling direct characterization of large intact protein assemblies. However, native spectra derived from these assemblies are often partially obscured by low signal-to-noise as well as broad peak shapes because of residual solvation and adduction after the electrospray process. The wide peak widths together with the fact that sequential charge state series from highly charged ions are closely spaced means that native spectra containing multiple species often suffer from high degrees of peak overlap or else contain highly interleaved charge envelopes. This situation presents a challenge for peak detection, correct charge state and charge envelope assignment, and ultimately extraction of the relevant underlying mass values of the noncovalent assemblages being investigated. In this report, we describe a comprehensive algorithm developed for addressing peak detection, peak overlap, and charge state assignment in native mass spectra, called PeakSeeker. Overlapped peaks are detected by examination of the second derivative of the raw mass spectrum. Charge state distributions of the molecular species are determined by fitting linear combinations of charge envelopes to the overall experimental mass spectrum. This software is capable of deconvoluting heterogeneous, complex, and noisy native mass spectra of large protein assemblies as demonstrated by analysis of (1) synthetic mononucleosomes containing severely overlapping peaks, (2) an RNA polymerase II/α-amanitin complex with many closely interleaved ion signals, and (3) human TriC complex containing high levels of background noise.

  14. Calculation of the decision threshold in gamma-ray spectrometry using sum peaks.

    PubMed

    Korun, M; Vodenik, B; Zorko, B

    2016-03-01

    In the presence of radon daughters, gamma rays from (88)Y with energies at 898.0keV or 1836.1keV appear on a high, continuous background or overlap with other peaks. Therefore a calculation of the decision threshold from the sum peak at 2734.1keV represents a useful alternative, because here the continuous background is low. The decision threshold calculated from this peak can attain a value being comparable to the decision threshold calculated from the gamma-ray peak at 898.0keV. PMID:26625726

  15. Integration of neutron time-of-flight single-crystal Bragg peaks in reciprocal space

    SciTech Connect

    Schultz, Arthur J; Joergensen, Mads; Wang, Xiaoping; Mikkelson, Ruth L; Mikkelson, Dennis J; Lynch, Vickie E; Peterson, Peter F; Green, Mark L; Hoffmann, Christina

    2014-01-01

    The intensity of single crystal Bragg peaks obtained by mapping neutron time-of-flight event data into reciprocal space and integrating in various ways are compared. These include spherical integration with a fixed radius, ellipsoid fitting and integrating of the peak intensity and one-dimensional peak profile fitting. In comparison to intensities obtained by integrating in real detector histogram space, the data integrated in reciprocal space results in better agreement factors and more accurate atomic parameters. Furthermore, structure refinement using integrated intensities from one-dimensional profile fitting is demonstrated to be more accurate than simple peak-minus-background integration.

  16. Spatial Ion Peak Compression and its Utility in Ion Mobility Spectrometry

    PubMed Central

    Garimella, Sandilya V. B.; Ibrahim, Yehia M.; Tang, Keqi; Webb, Ian K.; Baker, Erin S.; Tolmachev, Aleksey V.; Chen, Tsung-Chi; Anderson, Gordon A.; Smith, Richard D.

    2016-01-01

    A novel concept for ion spatial peak compression is described, and discussed primarily in the context of ion mobility spectrometry (IMS). Using theoretical and numerical methods, the effects of using non-constant (e.g., linearly varying) electric fields on ion distributions (e.g., an ion mobility peak) is evaluated both in the physical and temporal domains. The application of linearly decreasing electric field in conjunction with conventional drift field arrangements is shown to lead to a reduction in IMS physical peak width. When multiple ion packets (i.e. peaks) in a selected mobility window are simultaneously subjected to such fields, there is ion packet compression, i.e., a reduction in peak widths for all species. This peak compression occurs with only a modest reduction of resolution, and which can be quickly recovered as ions drift in a constant field after the compression event. Compression also yields a significant increase in peak intensities. Ion mobility peak compression can be particularly useful for mitigating diffusion driven peak spreading over very long path length separations (e.g., in cyclic multi-pass arrangements), and for achieving higher S/N and IMS resolution over a selected mobility range. PMID:27052738

  17. Incorporating peak grouping information for alignment of multiple liquid chromatography-mass spectrometry datasets

    PubMed Central

    Wandy, Joe; Daly, Rónán; Breitling, Rainer; Rogers, Simon

    2015-01-01

    Motivation: The combination of liquid chromatography and mass spectrometry (LC/MS) has been widely used for large-scale comparative studies in systems biology, including proteomics, glycomics and metabolomics. In almost all experimental design, it is necessary to compare chromatograms across biological or technical replicates and across sample groups. Central to this is the peak alignment step, which is one of the most important but challenging preprocessing steps. Existing alignment tools do not take into account the structural dependencies between related peaks that coelute and are derived from the same metabolite or peptide. We propose a direct matching peak alignment method for LC/MS data that incorporates related peaks information (within each LC/MS run) and investigate its effect on alignment performance (across runs). The groupings of related peaks necessary for our method can be obtained from any peak clustering method and are built into a pair-wise peak similarity score function. The similarity score matrix produced is used by an approximation algorithm for the weighted matching problem to produce the actual alignment result. Results: We demonstrate that related peak information can improve alignment performance. The performance is evaluated on a set of benchmark datasets, where our method performs competitively compared to other popular alignment tools. Availability: The proposed alignment method has been implemented as a stand-alone application in Python, available for download at http://github.com/joewandy/peak-grouping-alignment. Contact: Simon.Rogers@glasgow.ac.uk Supplementary information: Supplementary data are available at Bioinformatics online. PMID:25649621

  18. Remote detection of photoplethysmographic systolic and diastolic peaks using a digital camera.

    PubMed

    McDuff, Daniel; Gontarek, Sarah; Picard, Rosalind W

    2014-12-01

    We present a new method for measuring photoplethysmogram signals remotely using ambient light and a digital camera that allows for accurate recovery of the waveform morphology (from a distance of 3 m). In particular, we show that the peak-to-peak time between the systolic peak and diastolic peak/inflection can be automatically recovered using the second-order derivative of the remotely measured waveform. We compare measurements from the face with those captured using a contact fingertip sensor and show high agreement in peak and interval timings. Furthermore, we show that results can be significantly improved using orange, green, and cyan color channels compared to the tradition red, green, and blue channel combination. The absolute error in interbeat intervals was 26 ms and the absolute error in mean systolic-diastolic peak-to-peak times was 12 ms. The mean systolic-diastolic peak-to-peak times measured using the contact sensor and the camera were highly correlated, ρ = 0.94 (p 0.001). The results were obtained with a camera frame-rate of only 30 Hz. This technology has significant potential for advancing healthcare. PMID:25073159

  19. Accurate LC Peak Boundary Detection for 16O/18O Labeled LC-MS Data

    PubMed Central

    Cui, Jian; Petritis, Konstantinos; Tegeler, Tony; Petritis, Brianne; Ma, Xuepo; Jin, Yufang; Gao, Shou-Jiang (SJ); Zhang, Jianqiu (Michelle)

    2013-01-01

    In liquid chromatography-mass spectrometry (LC-MS), parts of LC peaks are often corrupted by their co-eluting peptides, which results in increased quantification variance. In this paper, we propose to apply accurate LC peak boundary detection to remove the corrupted part of LC peaks. Accurate LC peak boundary detection is achieved by checking the consistency of intensity patterns within peptide elution time ranges. In addition, we remove peptides with erroneous mass assignment through model fitness check, which compares observed intensity patterns to theoretically constructed ones. The proposed algorithm can significantly improve the accuracy and precision of peptide ratio measurements. PMID:24115998

  20. Spatial Ion Peak Compression and its Utility in Ion Mobility Spectrometry

    NASA Astrophysics Data System (ADS)

    Garimella, Sandilya V. B.; Ibrahim, Yehia M.; Tang, Keqi; Webb, Ian K.; Baker, Erin S.; Tolmachev, Aleksey V.; Chen, Tsung-Chi; Anderson, Gordon A.; Smith, Richard D.

    2016-06-01

    A novel concept for ion spatial peak compression is described, and discussed primarily in the context of ion mobility spectrometry (IMS). Using theoretical and numerical methods, the effects of using non-constant (e.g., linearly varying) electric fields on ion distributions (e.g., an ion mobility peak) is evaluated both in the physical and temporal domains. The application of a linearly decreasing electric field in conjunction with conventional drift field arrangements is shown to lead to a reduction in IMS physical peak width. When multiple ion packets (i.e., peaks) in a selected mobility window are simultaneously subjected to such fields, there is ion packet compression (i.e., a reduction in peak widths for all species). This peak compression occurs with only a modest reduction of resolution, which can be quickly recovered as ions drift in a constant field after the compression event. Compression also yields a significant increase in peak intensities. Ion mobility peak compression can be particularly useful for mitigating diffusion-driven peak broadening over very long path length separations (e.g., in cyclic multi-pass arrangements), and for achieving higher S/N and IMS resolution over a selected mobility range.