Science.gov

Sample records for sandia corporation 12-inch

  1. 12 Inch Fan Acoustic Research

    NASA Technical Reports Server (NTRS)

    Thomas, R. H.

    1997-01-01

    There were three general purposes of this research; first, to investigate fundamental fan acoustic processes, second, to produce high quality data for the validation of aeroacoustic codes and, third, to investigate candidate noise control concepts. These were all to be investigated using the NASA built and supplied 12 inch fan which is a 0.1 scale model of a modem ultra high bypass fan. NASA also supplied the test environments, wind tunnel entries in the 14 by 22 Foot Subsonic Wind Tunnel and the Anechoic Noise Research Facility. To fulfill the purposes of the grant, investigations were performed in several general topics. In the area of fundamental fan studies, some of the topics involved were azimuthal directivity and tip clearance effects. In the area of high quality validation data significant parameter studies in the wind tunnel tests were performed. And in the area of noise control concepts, heated air injection was studied. The principal investigator performed the work on this grant by leading the concept development, design, planning, data analysis and reporting of the areas studied. The final report for this grant consists of a listing, which follows, of all reports, presentations, and publications that were made for the work done during the performance period.

  2. Sandia National Laboratories corporate mentor program : program review, May 2004.

    SciTech Connect

    Tibbetts, Tiffany; Tarro, Talitha; Dudeck, William; Bristol, Colette; Stephens, Jim

    2005-01-01

    The Sandia National Laboratories Corporate Mentor Program provides a mechanism for the development and retention of Sandia's people and knowledge. The relationships formed among staff members at different stages in their careers offer benefits to all. These relationships can provide experienced employees with new ideas and insight and give less experienced employees knowledge of Sandia's culture, strategies, and programmatic direction. The program volunteer coordinators are dedicated to the satisfaction of the participants, who come from every area of Sandia. Since its inception in 1995, the program has sustained steady growth and excellent customer satisfaction. This report summarizes the accomplishments, activities, enhancements, and evaluation data for the Corporate Mentor Program for the 2003/2004 program year ending May 1, 2004.

  3. 26. INTERIOR VIEW WITH CLEANING OF A 12 INCH FLANGE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. INTERIOR VIEW WITH CLEANING OF A 12 INCH FLANGE ELBOW CASTING. JAMES CRUMB USED A SWING FRAME GRINDER TO CLEAN (GRIND SEAMS FROM) THIS 'EL.' - Stockham Pipe & Fittings Company, Grey Iron Foundry, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  4. Undergraduate Education with the Rutgers 12-Inch Cyclotron

    NASA Astrophysics Data System (ADS)

    Koeth, Timothy W.

    The Rutgers 12-Inch Cyclotron is a research grade accelerator dedicated to undergraduate education. From its inception, it has been intended for instruction and has been designed to demonstrate classic beam physics phenomena and provides students hands on experience with accelerator technology. The cyclotron is easily reconfigured, allowing experiments to be designed and performed within one academic semester. Our cyclotron offers students the opportunity to operate an accelerator and directly observe many fundamental beam physics concepts, including axial and radial betatron motion, destructive resonances, weak and azimuthally varying field (AVF) focusing schemes, RF and DEE voltage effects, diagnostic techniques, and perform low energy nuclear reactions. This paper emphasizes the unique beam physics measurements and beam manipulations capable at the Rutgers 12-Inch Cyclotron.

  5. Audit of Sandia Corporation`s pension plans and other prefunded benefits

    SciTech Connect

    Not Available

    1994-04-06

    The audit disclosed that Sandia`s pension plans had $588.9 million in excess assets as of December 31, 1990, on a current value basis. If plan terminations and spin-offs occurred, at least $408.8 million of this amount could be returned to the Government without affecting the pension benefits that Sandia employees and retirees have earned. We recommended that Albuquerque take the necessary action to reduce the excess assets in the pension plans and recover the Government`s share. However, Albuquerque disagreed with the recommendation. Albuquerque justified leaving the excess assets in the pension plans to fund future plan amendments; to avoid future funding contributions; to avoid the costs and time-consuming administrative steps associated with taking action; and to prevent damaging effects on employee morale. We analyzed these points, and concluded that they should not prevent the Department from initiating action to return excess assets to the Government. Actuarial analysis of the pension plans showed that, even if certain plan adjustments were made, the plans were overfunded by $256 million as of December 31, 1991 (on an actuarial value basis).

  6. 28. 12INCH VERTICAL PUG MILL, MANUFACTURED BY THE CROSSLEY MANUFACTURING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. 12-INCH VERTICAL PUG MILL, MANUFACTURED BY THE CROSSLEY MANUFACTURING CO. OF TRENTON, NJ. IT WAS PURCHASED IN 1902, AND USED AT THE FIRST MORAVIAN POTTERY AND TILE WORKS BEFORE BEING MOVED TO IS PRESENT LOCATION IN 1912. AFTER THE PURCHASE OF THE BRICK AUGER, IT WAS PROBABLY USED TO MIX PIGMENT INTO BUFF CLAY TO PRODUCE COLORED-BODIED CLAYS. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

  7. 12-inch-wafer-scale CMOS active-pixel sensor for digital mammography

    NASA Astrophysics Data System (ADS)

    Heo, Sung Kyn; Kosonen, Jari; Hwang, Sung Ha; Kim, Tae Woo; Yun, Seungman; Kim, Ho Kyung

    2011-03-01

    This paper describes the development of an active-pixel sensor (APS) panel, which has a field-of-view of 23.1×17.1 cm and features 70-μm-sized pixels arranged in a 3300×2442 array format, for digital mammographic applications. The APS panel was realized on 12-inch wafers based on the standard complementary metal-oxide-semiconductor (CMOS) technology without physical tiling processes of several small-area sensor arrays. Electrical performance of the developed panel is described in terms of dark current, full-well capacity and leakage current map. For mammographic imaging, the optimized CsI:Tl scintillator is experimentally determined by being combined with the developed panel and analyzing im aging characteristics, such as modulation-transfer function, noise-power spectrum, detective quantum efficiency, image l ag, and contrast-detail analysis by using the CDMAM 3.4 phantom. With these results, we suggest that the developed CMOS-based detector can be used for conventional and advanced digital mammographic applications.

  8. Sandia Corporation (Albuquerque, NM)

    DOEpatents

    Ewsuk, Kevin G.; Arguello, Jr., Jose G.

    2006-01-31

    A method of designing a primary geometry, such as for a forming die, to be used in a powder pressing application by using a combination of axisymmetric geometric shapes, transition radii, and transition spaces to simulate the geometry where the shapes can be selected from a predetermined list or menu of axisymmetric shapes and then developing a finite element mesh to represent the geometry. This mesh, along with material properties of the component to be designed and powder, is input to a standard deformation finite element code to evaluate the deformation characteristics of the component being designed. The user can develop the geometry interactively with a computer interface in minutes and execute a complete analysis of the deformation characteristics of the simulated component geometry.

  9. Sandia Corporation (Albuquerque, NM)

    DOEpatents

    Diver, Richard B.

    2010-02-23

    A Theoretical Overlay Photographic (TOP) alignment method uses the overlay of a theoretical projected image of a perfectly aligned concentrator on a photographic image of the concentrator to align the mirror facets of a parabolic trough solar concentrator. The alignment method is practical and straightforward, and inherently aligns the mirror facets to the receiver. When integrated with clinometer measurements for which gravity and mechanical drag effects have been accounted for and which are made in a manner and location consistent with the alignment method, all of the mirrors on a common drive can be aligned and optimized for any concentrator orientation.

  10. Sandia Strategic Plan 1997

    SciTech Connect

    1997-12-01

    Sandia embarked on its first exercise in corporate strategic planning during the winter of 1989. The results of that effort were disseminated with the publication of Strategic Plan 1990. Four years later Sandia conducted their second major planning effort and published Strategic Plan 1994. Sandia`s 1994 planning effort linked very clearly to the Department of Energy`s first strategic plan, Fueling a Competitive Economy. It benefited as well from the leadership of Lockheed Martin Corporation, the management and operating contractor. Lockheed Martin`s corporate success is founded on visionary strategic planning and annual operational planning driven by customer requirements and technology opportunities. In 1996 Sandia conducted another major planning effort that resulted in the development of eight long-term Strategic Objectives. Strategic Plan 1997 differs from its predecessors in that the robust elements of previous efforts have been integrated into one comprehensive body. The changes implemented so far have helped establish a living strategic plan with a stronger business focus and with clear deployment throughout Sandia. The concept of a personal line of sight for all employees to this strategic plan and its objectives, goals, and annual milestones is becoming a reality.

  11. Effect of Distribution of Basket-Hole Area on Simulated Altitude Performance of 25 1/2-Inch-Diameter Annular-Type Turbojet Combustor

    NASA Technical Reports Server (NTRS)

    Olson, Walter T.; Schroeter, Thomas T.

    1948-01-01

    A simulated altitude performance of a 25 1/2-inch-diameter annular-type turbojet combustor was performed to determine the effect of the distribution of basket-hole area on the altitude operational limits of the engine as imposed by the combustor.Total pressure drop was recorded, as well as the effect of fuel-nozzle flow capacity,and fuel-nozzle spray angle for one basket configuration. General observations were made for all configurations regarding flames, extent of afterburning, and durability of the baskets.

  12. Inside Sandia

    SciTech Connect

    Goetsch, B.

    1995-08-01

    Inside Sandia, published every other month, presents technological advances made at Sandia National Laboratories. The articles in IS will cover a wide range of technologies that have been developed at Sandia. Some of the areas that will receive a good deal of attention in these pages include information sciences, manufacturing and robotics, environmental science, energy research, transportation technology, and biomedical engineering. All of this work is done to further Sandia National Laboratories` missions in defense, energy, and environmental research, and technology transfer.

  13. High performance computing at Sandia National Labs

    SciTech Connect

    Cahoon, R.M.; Noe, J.P.; Vandevender, W.H.

    1995-10-01

    Sandia`s High Performance Computing Environment requires a hierarchy of resources ranging from desktop, to department, to centralized, and finally to very high-end corporate resources capable of teraflop performance linked via high-capacity Asynchronous Transfer Mode (ATM) networks. The mission of the Scientific Computing Systems Department is to provide the support infrastructure for an integrated corporate scientific computing environment that will meet Sandia`s needs in high-performance and midrange computing, network storage, operational support tools, and systems management. This paper describes current efforts at SNL/NM to expand and modernize centralized computing resources in support of this mission.

  14. Sandia National Laboratories embraces ISDN

    SciTech Connect

    Tolendino, L.F.; Eldridge, J.M.

    1994-08-01

    Sandia National Laboratories (Sandia), a multidisciplinary research and development laboratory located on Kirtland Air Force Base, has embraced Integrated Services Digital Network technology as an integral part of its communication network. Sandia and the Department of Energy`s Albuquerque Operations Office have recently completed the installation of a modernized and expanded telephone system based, on the AT&T 5ESS telephone switch. Sandia is committed to ISDN as an integral part of data communication services, and it views ISDN as one part of a continuum of services -- services that range from ISDN`s asynchronous and limited bandwidth Ethernet (250--1000 Kbps) through full bandwidth Ethernet, FDDI, and ATM at Sonet rates. Sandia has demonstrated this commitment through its use of ISDN data features to support critical progmmmatic services such as access to corporate data base systems. In the future, ISDN will provide enhanced voice, data communication, and video services.

  15. A brief history of Sandia's National security missions.

    SciTech Connect

    Drewien, Celeste A.; O'Canna, Myra Lynn; Stikar, John Anthony.

    2014-09-01

    To help members of the workforce understand what factors contribute to Sandia National Laboratories national security mission, the authors describe the evolution of Sandias core mission and its other mission components. The mission of Sandia first as a division of Los Alamos and later as Sandia Corporation underlies our core nuclear weapon mission of today. Sandias mission changed in 1963 and twice more in the 1970s. This report should help staff and management appreciate the need for mission evolution. A clear definition and communication of a consistent corporate mission statement is still needed.

  16. Sandia National Laboratories: The First Fifty Years

    SciTech Connect

    MORA,CARL J.

    1999-11-03

    On Nov. 1, 1999, Sandia National Laboratories celebrates its 50th birthday. Although Sandia has its roots in the World War II-era Manhattan Project, Sandia began operating as a separate nuclear weapons engineering laboratory under the management of AT&T on Nov. 1, 1949. Today the lab employs more than 7,000 people at its two sites in Albuquerque and Livermore, California, and has research and development missions in national security, energy and environmental technologies, and U.S. economic competitiveness. Lockheed Martin Corporation operates Sandia for the US. Department of Energy.

  17. Sandia`s network for supercomputing `95: Validating the progress of Asynchronous Transfer Mode (ATM) switching

    SciTech Connect

    Pratt, T.J.; Vahle, O.; Gossage, S.A.

    1996-04-01

    The Advanced Networking Integration Department at Sandia National Laboratories has used the annual Supercomputing conference sponsored by the IEEE and ACM for the past three years as a forum to demonstrate and focus communication and networking developments. For Supercomputing `95, Sandia elected: to demonstrate the functionality and capability of an AT&T Globeview 20Gbps Asynchronous Transfer Mode (ATM) switch, which represents the core of Sandia`s corporate network, to build and utilize a three node 622 megabit per second Paragon network, and to extend the DOD`s ACTS ATM Internet from Sandia, New Mexico to the conference`s show floor in San Diego, California, for video demonstrations. This paper documents those accomplishments, discusses the details of their implementation, and describes how these demonstrations supports Sandia`s overall strategies in ATM networking.

  18. Sandia MEMS

    Energy Science and Technology Software Center (ESTSC)

    2002-06-13

    SUMMiT V (Sandia Ultra planar Multi level MEMS Technology) is a 5 level surface micromachine fabrication technology, which customers intornal and external to Sandia can access to fabricate prototype MEMS devices. This CD contains an integrated set of electronic files that: a) Describe the SUMMiT V fabrication process b) Provide enabling educational information (including pictures, videos, technical information) c) Facilitate the process of designing MEMS with the SUMMiT process (prototype file, Design Rule Checker, Standardmore » Parts Library) d) Facilitate the process of having MEMS fabricated at Sandia National Laboratories e) Facilitate the process of having post-fabrication services performed. While there exist some files on the CD that are used in conjunction with software package AutoCAD, these files are not intended for use independent of the CD. Nole that the customer must purchase his/her own copy of Aut0CAD to use with these files.« less

  19. Sandia technology

    NASA Astrophysics Data System (ADS)

    1981-05-01

    General information is provided on technical programs at Sandia Laboratories. Three such programs are described: terradynamics, in which penetrators probe the Earth's response to high speed intrusion; Auger electron spectroscopy; and the national seismic station program, in which monitoring stations placed inside Russia could detect nuclear tests.

  20. Site environmental report for 2008 Sandia National Laboratories, California.

    SciTech Connect

    Larsen, Barbara L.

    2009-04-01

    Sandia National Laboratories, California (SNL/CA) is a government-owned/contractor operated laboratory. Sandia Corporation, a Lockheed Martin Company, operates the laboratory for the Department of Energy's National Nuclear Security Administration (NNSA). The NNSA Sandia Site Office oversees operations at the site, using Sandia Corporation as a management and operating contractor. This Site Environmental Report for 2008 was prepared in accordance with DOE Order 231.1A (DOE 2004a). The report provides a summary of environmental monitoring information and compliance activities that occurred at SNL/CA during calendar year 2008. General site and environmental program information is also included.

  1. Site environmental report for 2006 Sandia National Laboratories, California.

    SciTech Connect

    Larsen, Barbara L.

    2007-06-01

    Sandia National Laboratories, California (SNL/CA) is a government-owned/contractor-operated laboratory. Sandia Corporation, a Lockheed Martin Company, operates the laboratory for the Department of Energy's National Nuclear Security Administration (NNSA). The NNSA Sandia Site Office oversees operations at the site, using Sandia Corporation as a management and operating contractor. This Site Environmental Report for 2006 was prepared in accordance with DOE Order 231.1A (DOE 2004a). The report provides a summary of environmental monitoring information and compliance activities that occurred at SNL/CA during calendar year 2006. General site and environmental program information is also included.

  2. Site environmental report for 2004 Sandia National Laboratories, California.

    SciTech Connect

    Larsen, Barbara L. (Sandia National Laboratories, Livermore, CA)

    2005-06-01

    Sandia National Laboratories, California (SNL/CA) is a government-owned/contractor-operated laboratory. Sandia Corporation, a Lockheed Martin Company, operates the laboratory for the Department of Energy's (DOE) National Nuclear Security Administration. The DOE Sandia Site Office oversees operations at the site, using Sandia Corporation as a management and operating contractor. This Site Environmental Report for 2004 was prepared in accordance with DOE Order 231.1A. The report provides a summary of environmental monitoring information and compliance activities that occurred at SNL/CA during calendar year 2004. General site and environmental program information is also included.

  3. Site environmental report for 2003 Sandia National Laboratories, California.

    SciTech Connect

    Larsen, Barbara L.

    2004-06-01

    Sandia National Laboratories, California (SNL/CA) is a government-owned/contractor-operated laboratory. Sandia Corporation, a Lockheed Martin Company, operates the laboratory for the Department of Energy's (DOE) National Nuclear Security Administration. The DOE Sandia Site Office oversees operations at the site, using Sandia Corporation as a management and operating contractor. This Site Environmental Report for 2003 was prepared in accordance with DOE Order 231.1A. The report provides a summary of environmental monitoring information and compliance activities that occurred at SNL/CA during calendar year 2003. General site and environmental program information is also included.

  4. Site environmental report for 2005 Sandia National Laboratories, California.

    SciTech Connect

    Larsen, Barbara L.

    2006-06-01

    Sandia National Laboratories, California (SNL/CA) is a government-owned/contractor-operated laboratory. Sandia Corporation, a Lockheed Martin Company, operates the laboratory for the Department of Energy's (DOE) National Nuclear Security Administration (NNSA). The DOE/NNSA Sandia Site Office (SSO) oversees operations at the site, using Sandia Corporation as a management and operating contractor. This Site Environmental Report for 2005 was prepared in accordance with DOE Order 231.1A. The report provides a summary of environmental monitoring information and compliance activities that occurred at SNL/CA during calendar year 2005. General site and environmental program information is also included.

  5. Sandia NLVEabq

    Energy Science and Technology Software Center (ESTSC)

    2005-03-07

    Sandia NLVEabq is a FORTRAN subroutine that defines a user supplied material model for the ABAQUS commercial finite element code. It must be compiled and linked with the ABAQUS libraries under the user supplied subroutine option of the ABAQUS executable script. The subroutine is an implementation of Sandia National Laboratories nonlinear viscoelastic material model that is used to analyze the thermomechanicat behavior of polymers. It is thermodynamically consistent, incorporates finite strains and is applicable tomore » isotropic materials. The model is capable of predicting such diverse phenomena as stress relaxation, yielding, physical aging, thermal straining and enthalpy relaxation under arbitrary thermal and mechanical loading histories. This subroutine enables the ABAQUS finite element code to be sued for analyzing the performance of samples and structures that are made from polymers,« less

  6. Sandia technology

    SciTech Connect

    Not Available

    1982-06-01

    Four research programs at Sandia are described. These include combustion research aimed at improved efficiency in flames, coal combustors, and internal combustion engines; an implantable insulin delivery system, with an electronically controlled insulin pump derived from weapon technology, provides reliable insulin delivery when implanted in diabetic patients; experiments and prototype testing point to molten nitrate salts as an effective and economical fluid for both heat and heat storage in solar central receivers; and design of packaging for air transport of radioactive reactor samples. (GHT)

  7. Inside Sandia

    SciTech Connect

    1995-12-31

    Articles in this issue include ``Molten salt corrosion testing,`` ``Pulsed ion beams for thermal surface treatment: Improved corrosion, wear, and hardness properties at low cost,`` ``Unmasking hidden armaments: Superconducting gravity sensor could find underground weapons, bunkers,`` ``Charbroiled burgers, heterocyclic amines, and cancer: Molecular modeling identifies dangerous mutagens,`` ``Revolutionary airbag offers increased safety options,`` ``EcoSys{sup TM}: an expert system for `Green Design` ``, ``Sandia, salt, and oil: Labs` diagnostics and analysis help maintain vital US oil reserve,`` and ``Automated fixture design speeds development for prototypes and production``.

  8. Teamwork and diversity: A survey at Sandia National Laboratories

    SciTech Connect

    Apodaca, T.; Berman, M.; Griego, C.; Jansma, R.; Leatherwood, M.; Lovato, L.; Sanchez, A.

    1995-11-01

    In September, 1994, Sandia`s Diversity Leadership and Education Outreach Center arid the Corporate Diversity Team commissioned a Diversity Action Team (DAT-Phase II) to address the area of team- work. The goal of this DAT was to identify ways to capitalize on the diversity of people to enhance team success at Sandia. Given a six- month lifetime and funding levels of 12 hours per person per month, we chose to accomplish our goal by gathering and analyzing data on the performance and diversity of Sandia teams and publishing this report of our findings. The work presented herein builds on earlier work of this team.

  9. Sandia`s computer support units: The first three years

    SciTech Connect

    Harris, R.N.

    1997-11-01

    This paper describes the method by which Sandia National Laboratories has deployed information technology to the line organizations and to the desktop as part of the integrated information services organization under the direction of the Chief Information officer. This deployment has been done by the Computer Support Unit (CSU) Department. The CSU approach is based on the principle of providing local customer service with a corporate perspective. Success required an approach that was both customer compelled at times and market or corporate focused in most cases. Above all, a complete solution was required that included a comprehensive method of technology choices and development, process development, technology implementation, and support. It is the authors hope that this information will be useful in the development of a customer-focused business strategy for information technology deployment and support. Descriptions of current status reflect the status as of May 1997.

  10. Sandia's Biofuels Program

    SciTech Connect

    Simmons, Blake; Singh, Seema; Lane, Todd; Reichardt, Tom; Davis, Ryan

    2014-07-22

    Sandia's biofuels program is focused on developing next-generation, renewable fuel solutions derived from biomass. In this video, various Sandia researchers discuss the program and the tools they employ to tackle the technical challenges they face.

  11. Sandia's Biofuels Program

    ScienceCinema

    Simmons, Blake; Singh, Seema; Lane, Todd; Reichardt, Tom; Davis, Ryan

    2014-07-24

    Sandia's biofuels program is focused on developing next-generation, renewable fuel solutions derived from biomass. In this video, various Sandia researchers discuss the program and the tools they employ to tackle the technical challenges they face.

  12. Sandia Scalable Encryption Software

    SciTech Connect

    Tarman, Thomas D.

    1997-08-13

    Sandia Scalable Encryption Library (SSEL) Version 1.0 is a library of functions that implement Sandia''s scalable encryption algorithm. This algorithm is used to encrypt Asynchronous Transfer Mode (ATM) data traffic, and is capable of operating on an arbitrary number of bits at a time (which permits scaling via parallel implementations), while being interoperable with differently scaled versions of this algorithm. The routines in this library implement 8 bit and 32 bit versions of a non-linear mixer which is compatible with Sandia''s hardware-based ATM encryptor.

  13. Sandia Scalable Encryption Software

    Energy Science and Technology Software Center (ESTSC)

    1997-08-13

    Sandia Scalable Encryption Library (SSEL) Version 1.0 is a library of functions that implement Sandia''s scalable encryption algorithm. This algorithm is used to encrypt Asynchronous Transfer Mode (ATM) data traffic, and is capable of operating on an arbitrary number of bits at a time (which permits scaling via parallel implementations), while being interoperable with differently scaled versions of this algorithm. The routines in this library implement 8 bit and 32 bit versions of a non-linearmore » mixer which is compatible with Sandia''s hardware-based ATM encryptor.« less

  14. Tonopah test range - outpost of Sandia National Laboratories

    SciTech Connect

    Johnson, L.

    1996-03-01

    Tonopah Test Range is a unique historic site. Established in 1957 by Sandia Corporation, Tonopah Test Range in Nevada provided an isolated place for the Atomic Energy Commission to test ballistics and non-nuclear features of atomic weapons. It served this and allied purposes well for nearly forty years, contributing immeasurably to a peaceful conclusion to the long arms race remembered as the Cold War. This report is a brief review of historical highlights at Tonopah Test Range. Sandia`s Los Lunas, Salton Sea, Kauai, and Edgewood testing ranges also receive abridged mention. Although Sandia`s test ranges are the subject, the central focus is on the people who managed and operated the range. Comments from historical figures are interspersed through the narrative to establish this perspective, and at the end a few observations concerning the range`s future are provided.

  15. Sandia Technology: Engineering and science accomplishments, February 1995

    SciTech Connect

    1995-02-01

    Sandia National Laboratories is one of the Department of Energy`s primary research and development laboratories. Our essential mission is to support the national interests of the US in defense, energy, and the environment. Managed by Martin Marietta Corporation for DOE, Sandia focuses its resources on problems of national interest that require the integration of science and technology for their solution. We all hope that this period of sweeping alterations in international affairs will result in a successful transition from the Cold War to a period of sustainable global security and prosperity. In the meantime, our nation`s interests are best served by continued commitment to Sandia`s traditional responsibilities. Nonetheless, as momentous developments are reshaping the world, Sandia is also changing from its beginning as a closed operation concentrating on classified defense programs, Sandia has become a more accessible resource that focuses on research and development partnerships with industry and universities as a way to ensure continued success in DOE`s evolving core mission area of nuclear weapons, energy, environment, and the basis sciences. Through these collaborative efforts, Sandia and its partners are also benefiting the economic competitiveness of our nation. Sandia places a special emphasis on working with small businesses as both technology transfer partners and suppliers of goods and services. We are also reaching out the the larger community surrounding Sandia, striving to provide technological solution and accurate information to meet community needs. We believe that the dialogue we are creating will benefit Sandia, the community, and the nation. Our goal is to render `` exceptional service in the national interest`` by returning maximum value on the investment in the labs. As you review this document, look for new ways in which Sandia can contribute to the solution of problems facing our nation.

  16. Sandia microelectronics development

    SciTech Connect

    Weaver, H.T.

    1997-02-01

    An overview of the operations of Sandia`s Microelectronics Development Lab (MDL) is to develop radiation hardened IC, but techniques used for IC processing have been applied to a variety of related technologies such as micromechanics, smart sensors, and packaging.

  17. Sandia National Laboratories

    NASA Technical Reports Server (NTRS)

    Gilliom, Laura R.

    1992-01-01

    Sandia National Laboratories has identified technology transfer to U.S. industry as a laboratory mission which complements our national security mission and as a key component of the Laboratory's future. A number of technology transfer mechanisms - such as CRADA's, licenses, work-for-others, and consortia - are identified and specific examples are given. Sandia's experience with the Specialty Metals Processing Consortium is highlighted with a focus on the elements which have made it successful. A brief discussion of Sandia's potential interactions with NASA under the Space Exploration Initiative was included as an example of laboratory-to-NASA technology transfer. Viewgraphs are provided.

  18. Inside Sandia, April 1996

    SciTech Connect

    Locke, T.

    1996-04-01

    Brief articles in this issue are entitled: New testing techniques, textiles on the information superhighway, and knowledge preservation; Structural health monitoring techniques and robust analysis tools assess aging and damaged structures; Sandia`s VCSELs (Vertical-Cavity Surface-Emitting Lasers): sparking a laser diode revolution; Fiber-optic instrumentation trims weeks off the wait for cervical cancer test results; DAMA (Demand Activated Manufacturing Architecture) project boosts competitiveness of US textile industry; SEAMIST (Science and Engineering Associates Membrane Instrumentation and Sampling Technique) cuts contamination cleanup costs; RePAVing the roads to the past (Relevant Point of Access Video); and Sandia receives DOE basic energy sciences award for sol-gel achievements.

  19. Double Shock Experiments on the Sandia Z Machine

    NASA Astrophysics Data System (ADS)

    Hanshaw, Heath; Knudson, Marcus; Desjarlais, Michael; Lemke, Ray

    2011-06-01

    The double shock layered high-velocity flyer plate is one new capability being developed on Sandia's Z machine. With this technique, dynamic material data at high energy densities can be obtained at points in phase space which lie neither on principal Hugoniots nor on quasi-isentropic ramp curves. For example, the hypothesized HCP to BCC phase transition in beryllium can be measured, as can the high pressure melt curve. Another example is a postulated refreeze of tantalum. We discuss the double shock experiments being performed on Z, including accessible conditions, design and experimental methods, and analysis of results. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  20. The Sandia Lightning Simulator.

    SciTech Connect

    Martinez, Leonard E.; Caldwell, Michele

    2005-01-01

    The Sandia Lightning Simulator at Sandia National Laboratories can provide up to 200 kA for a simulated single lightning stroke, 100 kA for a subsequent stroke, and hundreds of Amperes of continuing current. It has recently been recommissioned after a decade of inactivity and the single-stroke capability demonstrated. The simulator capabilities, basic design components, upgrades, and diagnostic capabilities are discussed in this paper.

  1. Annual Site Environmental Report Sandia National Laboratories, Albuquerque, New Mexico, Calendar year 2007

    SciTech Connect

    Agogino, Karen; Sanchez, Rebecca

    2008-09-30

    Sandia National Laboratories, New Mexico (SNL/NM) is a government-owned/contractor-operated facility. Sandia Corporation (Sandia), a wholly owned subsidiary of Lockheed Martin Corporation, manages and operates the laboratory for the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA). The DOE/NNSA Sandia Site Office (SSO) administers the contract and oversees contractor operations at the site. This annual report summarizes data and the compliance status of Sandia Corporation’s environmental protection and monitoring programs through December 31, 2007. Major environmental programs include air quality, water quality, groundwater protection, terrestrial surveillance, waste management, pollution prevention (P2), environmental restoration (ER), oil and chemical spill prevention, and implementation of the National Environmental Policy Act (NEPA). Environmental monitoring and surveillance programs are required by DOE Order 450.1, Environmental Protection Program (DOE 2007a) and DOE Manual 231.1-1A, Environment, Safety, and Health Reporting (DOE 2007).

  2. Calendar Year 2009 Annual Site Environmental Report for Sandia National Laboratories, New Mexico

    SciTech Connect

    Armstrong, Karen; Bailey-White, Brenda; Bonaguidi, Joseph; Brown, Mendy; Byrd, Caroline; Cabble, Kevin; Castillo, Dave; Coplen, Amy; Curran, Kelsey; Deola, Regina; Duran, Leroy; Eckstein, Joanna; Evelo, Stacie; Fitzgerald, Tanja; French, Chris; Gerard, Morgan; Gonzales, Linda; Gorman, Susan; Jackson, Timothy; Jarry, Jeff; Jones, Adrian; Lauffer, Franz; Mauser, Joseph; Mayeux, Lucie; McCord, Samuel; Miller, Mark; Oborny, Stephanie; Perini, Robin; Puissant, Pamela; Reiser, Anita; Roma, Charles; Salinas, Stephanie; Skelly, Michael; Ullrich, Rebecca; Wagner, Katrina; Wrons, Ralph

    2010-09-30

    Sandia National Laboratories, New Mexico (SNL/NM) is a government-owned/contractor operated facility. Sandia Corporation (Sandia), a wholly owned subsidiary of Lockheed Martin Corporation (LMC), manages and operates the laboratory for the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA). The DOE/NNSA, Sandia Site O ffice (SSO) administers the contract and oversees contractor operations at the site. This annual report summarizes data and the compliance status of Sandia Corporation’s environmental protection and monitoring programs through December 31, 2009. Major environmental programs include air quality, water quality, groundwater protection, terrestrial surveillance, waste management, pollution prevention (P2), environmental restoration (ER), oil and chemical spill prevention, and implementation of the National Environmental Policy Act (NEPA). Environmental monitoring and surveillance programs are required by DOE Order 450.1A, Environmental Protection Program (DOE 2008a) and DOE Manual 231.1-1A, Environment, Safety, and Health Reporting (DOE 2007).

  3. Calendar year 2003 annual site environmental report for Sandia National Laboratories, New Mexico.

    SciTech Connect

    Wagner, Katrina; Sanchez, Rebecca V.; Mayeux, Lucie; Koss, Susan I.; Salinas, Stephanie A.

    2004-09-01

    Sandia National Laboratories, New Mexico (SNL/NM) is a government-owned, contractor-operated facility owned by the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) and managed by the Sandia Site Office (SSO), Albuquerque, New Mexico. Sandia Corporation, a wholly-owned subsidiary of Lockheed Martin Corporation, operates SNL/NM. This annual report summarizes data and the compliance status of Sandia Corporation's environmental protection and monitoring programs through December 31, 2003. Major environmental programs include air quality, water quality, groundwater protection, terrestrial surveillance, waste management, pollution prevention (P2), environmental restoration (ER), oil and chemical spill prevention, and the National Environmental Policy Act (NEPA). Environmental monitoring and surveillance programs are required by DOE Order 450.1, ''Environmental Protection Program'' (DOE 2003a) and DOE Order 231.1 Chg.2, ''Environment, Safety, and Health Reporting'' (DOE 1996).

  4. Calendar year 2004 annual site environmental report:Sandia National Laboratories, Albuquerque, New Mexico.

    SciTech Connect

    Montoya, Amber L.; Goering, Teresa Lynn; Wagner, Katrina; Koss, Susan I.; Salinas, Stephanie A.

    2005-09-01

    Sandia National Laboratories, New Mexico (SNL/NM) is a government-owned, contractor-operated facility owned by the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) and managed by the Sandia Site Office (SSO), Albuquerque, New Mexico. Sandia Corporation, a wholly-owned subsidiary of Lockheed Martin Corporation, operates SNL/NM. This annual report summarizes data and the compliance status of Sandia Corporation's environmental protection and monitoring programs through December 31, 2004. Major environmental programs include air quality, water quality, groundwater protection, terrestrial surveillance, waste management, pollution prevention (P2), environmental restoration (ER), oil and chemical spill prevention, and the National Environmental Policy Act (NEPA). Environmental monitoring and surveillance programs are required by DOE Order 450.1, Environmental Protection Program (DOE 2005) and DOE Order 231.1A, Environment, Safety, and Health Reporting (DOE 2004a). (DOE 2004a).

  5. Calendar year 2002 annual site environmental report for Sandia National Laboratories, New Mexico.

    SciTech Connect

    Wagner, Katrina; Sanchez, Rebecca V.; Mayeux, Lucie; Koss, Susan I.; Salinas, Stephanie A.

    2003-09-01

    Sandia National Laboratories, New Mexico (SNL/NM) is a government-owned, contractor-operated facility overseen by the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) through the Sandia Site Office (SSO), Albuquerque, New Mexico. Sandia Corporation, a wholly-owned subsidiary of Lockheed Martin Corporation, operates SNL/NM. This annual report summarizes data and the compliance status of Sandia Corporation's environmental protection and monitoring programs through December 31, 2002. Major environmental programs include air quality, water quality, groundwater protection, terrestrial surveillance, waste management, pollution prevention (P2), environmental restoration (ER), oil and chemical spill prevention, and the National Environmental Policy Act (NEPA). Environmental monitoring and surveillance programs are required by DOE Order 5400.1, General Environmental Protection Program (DOE 1990) and DOE Order 231.1, Environment, Safety, and Health Reporting (DOE 1996).

  6. Sandia National Laboratories approach to emergency preparedness

    SciTech Connect

    Galegar, F.H.; Yourick, P.D.; Ross, S.A.

    1997-12-31

    Sandia National Laboratories is located on Kirtland AFB on Albuquerque, NM. The Air Force Base proper covers about 74 square miles in which SNL maintains 5 technical areas and the Coyote Test Field. These SNL areas add up to about 18,000 acres. However, SNL has other locations where we conduct corporate emergency planning: Kauai Test Facility (at Pacific Missile Range Facility in Kauai, Hawaii), and the Tonopah Test Range (Nevada). SNL/California located in Livermore has an independent emergency preparedness organization for their emergency planning activities.

  7. Connecting the physical and psychosocial space to Sandia's mission.

    SciTech Connect

    Emmanuel, Glory Ruth; Silva, Austin Ray

    2014-07-01

    Sandia Labs has corporate, lab-wide efforts to enhance the research environment as well as improve physical space. However, these two efforts are usually done in isolation. The integration of physical space design with the nurturing of what we call psychosocial space can foster more efficient and effective creativity, innovation, collaboration, and performance. This paper presents a brief literature review on how academia and industry are studying the integration of physical and psychosocial space and focuses on the efforts that we, the authors, have made to improve the research environment in the Cyber Engineering Research Lab (CERL), home to Group 1460. Interviews with subject matter experts from Silicon Valley and the University of New Mexico plus changes to actual spaces in CERL provided us with six lessons learned when integrating physical and psychosocial space. We describe these six key takeaways in hopes that Sandia will see this area as an evolving research capability that Sandia can both contribute to and benefit from.

  8. Calendar Year 2013 Annual Site Environmental Report for Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect

    Griffith, Stacy

    2014-09-01

    Sandia National Laboratories, New Mexico is a government-owned/contractor-operated facility. Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, manages and operates the laboratory for the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA). The DOE/NNSA, Sandia Field Office administers the contract and oversees contractor operations at the site. This annual report summarizes data and the compliance status of Sandia Corporation’s sustainability, environmental protection, and monitoring programs through December 31, 2013. Major environmental programs include air quality, water quality, groundwater protection, terrestrial surveillance, waste management, pollution prevention, environmental restoration, oil and chemical spill prevention, and implementation of the National Environmental Policy Act. Environmental monitoring and surveillance programs are required by DOE Order 231.1B, Environment, Safety, and Health Reporting (DOE 2012).

  9. Sandia`s photonic program and its changing national role

    SciTech Connect

    Carson, R.F.; Meyer, W.J.

    1994-03-01

    Photonics activities at Sandia National Laboratories are founded on an extensive materials research program. In 1988, the Compound Semiconductor Research Laboratory (CSRL) was established at Sandia to bring together device and materials research and development, in support of Sandia`s role in weapons technologies. Recently, industrial competitiveness has been added as a major mission for the national laboratories. As a result, present photonics programs are not only directed towards internal applications-driven projects, but are increasingly tied to the Department Of Energy`s (DOE`s) Technology Transfer Initiatives (TTIs), Cooperative Research and Development Agreements (CRADAs), and participation in partnerships and consortia. This evolution yields a full range of photonics programs, ranging from materials synthesis and device fabrication to packaging, test, and subsystem development. This paper presents an overview of Sandia`s photonics-program directions, using three applications as examples.

  10. The creation of Sandia`s telecommunication cabling infrastructure

    SciTech Connect

    Adams, R.; Francis, T.

    1996-01-01

    Sandia National Laboratories in Albuquerque, New Mexico, has adopted strategic, standards-based telecommunication technologies to deliver high-speed communication services to its research and development community. The architecture to provide these services specifies a cabling system capable of carrying high-bandwidth signals to each desktop. While the facilities infrastructure of Sandia has been expanding and evolving over the past four decades to meet the needs of this premier research and development community, the communications infrastructure has remained essentially stagnant. The need to improve Sandia`s telecommunication cable infrastructure gave rise to the Intra-building Recabling Project (IRP). The IRP directed Sandia`s efforts to modernize and standardize the communications infrastructure throughout its New Mexico campus. This report focuses on the development and implementation of the project`s design considerations, concepts, and standards, as well as the adopted transmission media and supporting delivery subsystems.

  11. Sandia WIPP calibration traceability

    SciTech Connect

    Schuhen, M.D.; Dean, T.A.

    1996-05-01

    This report summarizes the work performed to establish calibration traceability for the instrumentation used by Sandia National Laboratories at the Waste Isolation Pilot Plant (WIPP) during testing from 1980-1985. Identifying the calibration traceability is an important part of establishing a pedigree for the data and is part of the qualification of existing data. In general, the requirement states that the calibration of Measuring and Test equipment must have a valid relationship to nationally recognized standards or the basis for the calibration must be documented. Sandia recognized that just establishing calibration traceability would not necessarily mean that all QA requirements were met during the certification of test instrumentation. To address this concern, the assessment was expanded to include various activities.

  12. The Sandia petaflops planner.

    SciTech Connect

    DeBenedictis, Erik P.

    2003-10-01

    The Sandia Petaflops Planner is a tool for projecting the design and performance of parallel supercomputers into the future. The mathematical basis of these projections is the International Technology Roadmap for Semiconductors (ITRS, or a detailed version of Moore's Law) and DOE balance factors for supercomputer procurements. The planner is capable of various forms of scenario analysis, cost estimation, and technology analysis. The tool is described along with technology conclusions regarding PFLOPS-level supercomputers in the upcoming decade.

  13. Sandia Internship Fall 2014

    SciTech Connect

    Kuhn, Joshua

    2015-01-01

    While working at Sandia National Laboratories as a graduate intern from September 2014 to January 2015, most of my time was spent on two projects. The first project involved designing a test fixture for circuit boards used in a recording device. The test fixture was needed to decrease test set up time. The second project was to use optimization techniques to determine the optimal G-Switch for given acceleration profiles.

  14. Site environmental report for 2009 : Sandia National Laboratories, California.

    SciTech Connect

    Larsen, Barbara L.

    2010-06-01

    Sandia National Laboratories, California (SNL/CA) is a government-owned/contractor-operated laboratory. Sandia Corporation, a Lockheed Martin Company, operates the laboratory for the Department of Energy's National Nuclear Security Administration (NNSA). The NNSA Sandia Site Office oversees operations at the site, using Sandia Corporation as a management and operating contractor. This Site Environmental Report for 2009 was prepared in accordance with DOE Order 231.1A (DOE 2004a). The report provides a summary of environmental monitoring information and compliance activities that occurred at SNL/CA during calendar year 2009. General site and environmental program information is also included. The Site Environmental Report is divided into ten chapters. Chapter 1, the Executive Summary, highlights compliance and monitoring results obtained in 2009. Chapter 2 provides a brief introduction to SNL/CA and the existing environment found on site. Chapter 3 summarizes SNL/CA's compliance activities with the major environmental requirements applicable to site operations. Chapter 4 presents information on environmental management, performance measures, and environmental programs. Chapter 5 presents the results of monitoring and surveillance activities in 2009. Chapter 6 discusses quality assurance. Chapters 7 through 9 provide supporting information for the report and Chapter 10 is the report distribution list.

  15. Information engineering: Sandia's Computer Integrated Manufacturing (CIM) database

    SciTech Connect

    Sharp, J.K.

    1990-01-01

    The activities involved in establishing a Computer Integrated Manufacturing (CIM) database at Sandia National Laboratories (SNL) are part of a common effort to implement a proactive data administration function across administrative and technical databases. Data administration activities include the establishment of corporate data dictionary, a corporate information model, and a library of important objects and their relationships with other objects. Processes requiring information will be identified and supported with future information systems that share administrative and technical data. The process to create databases is being established based upon accepted engineering design practices. This paper discusses the CIM database, presents the selected information modeling technique and describes the information engineering process. 9 refs.

  16. Correlation of the structural properties of a Pt seed layer with the perpendicular magnetic anisotropy features of full Heusler-based Co2FeAl/MgO/Co2Fe6B2 junctions via a 12-inch scale Si wafer process

    NASA Astrophysics Data System (ADS)

    Chae, Kyo-Suk; Lee, Du-Yeong; Shim, Tae-Hun; Hong, Jin-Pyo; Park, Jea-Gun

    2013-10-01

    We elucidated the interfacial-perpendicular magnetic anisotropy (i-PMA) features of full Heusler-based Co2FeAl/MgO/Co2Fe6B2 magnetic-tunnel-junctions as functions of the structural properties of the Pt seed layer including its thickness and ex situ annealing temperature. All of the samples were prepared in a 12-inch silicon wafer process for real industry applications. The observations of the M-H loops emphasize that a thinner Pt seed layer and a high ex situ annealing temperature enhance the surface roughness of the seed layer, providing better i-PMA characteristics. HR-TEM images of the samples were evaluated to understand the structural effects of thin and thick Pt seed layers.

  17. This is Sandia

    SciTech Connect

    Not Available

    1995-02-01

    Sandia is a multiprogram engineering and science laboratory operated for the Department of Energy with major facilities at Albuquerque, New Mexico, and Livermore, California, and a test range near Tonapah, Nevada. It has major research and development responsibilities for nuclear weapons, arms control, energy, the environment, economic competitiveness, and other areas of importance to the needs of the nation. The principal mission is to support national defense policies by ensuring that the nuclear weapon stockpile meets the highest standards of safety, reliability, security, use control, and military performance. This publication gives a brief overview of the multifaceted research programs conducted by the laboratory.

  18. Sandia Material Model Driver

    Energy Science and Technology Software Center (ESTSC)

    2005-09-28

    The Sandia Material Model Driver (MMD) software package allows users to run material models from a variety of different Finite Element Model (FEM) codes in a standalone fashion, independent of the host codes. The MMD software is designed to be run on a variety of different operating system platforms as a console application. Initial development efforts have resulted in a package that has been shown to be fast, convenient, and easy to use, with substantialmore » growth potential.« less

  19. Sandia Combustion Research Program

    SciTech Connect

    Johnston, S.C.; Palmer, R.E.; Montana, C.A.

    1988-01-01

    During the late 1970s, in response to a national energy crisis, Sandia proposed to the US Department of Energy (DOE) a new, ambitious program in combustion research. Shortly thereafter, the Combustion Research Facility (CRF) was established at Sandia's Livermore location. Designated a ''user facility,'' the charter of the CRF was to develop and maintain special-purpose resources to support a nationwide initiative-involving US inventories, industry, and national laboratories--to improve our understanding and control of combustion. This report includes descriptions several research projects which have been simulated by working groups and involve the on-site participation of industry scientists. DOE's Industry Technology Fellowship program, supported through the Office of Energy Research, has been instrumental in the success of some of these joint efforts. The remainder of this report presents results of calendar year 1988, separated thematically into eleven categories. Referred journal articles appearing in print during 1988 and selected other publications are included at the end of Section 11. Our traditional'' research activities--combustion chemistry, reacting flows, diagnostics, engine and coal combustion--have been supplemented by a new effort aimed at understanding combustion-related issues in the management of toxic and hazardous materials.

  20. Sandia National Laboratories, California Environmental Management System program manual.

    SciTech Connect

    Larsen, Barbara L.

    2012-03-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 436.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site first received ISO 14001 certification in September 2006 and recertification in 2009. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy and Water Resource Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups

  1. Sandia National Laboratories, California Environmental Management System Program Manual.

    SciTech Connect

    Not Available

    2009-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services Environmental programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National

  2. Sandia National Laboratories, California Environmental Management System Program Manual.

    SciTech Connect

    Larsen, Barbara L.

    2011-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories, New

  3. Transportation technology at Sandia

    SciTech Connect

    1994-12-31

    Industrial and military activities in the US produce large amounts of hazardous mixed waste, which includes both radioactive and toxic substances. The already overburdened environment is faced with the task of safely disposing of these complex wastes. A very important aspect of this effort is the safe and economical transportation of radioactive and toxic chemical wastes to projected repositories. Movement of wastes to the repository sites is accomplished by a combination of truck, rail, ship, and air. The DOE directs transportation activities including cask development technology for use in single or multimode transport. Sandia National Laboratories` Transportation Technology programs provide the technology and know-how to support DOE in achieving safe, efficient, and economical packaging and transportation of nuclear and other hazardous waste materials. This brochure describes the Transportation Technology programs and the specialized techniques and capabilities they offer to prospective users.

  4. Sandia technology & entrepreneurs improve Lasik

    ScienceCinema

    Neal, Dan; Turner, Tim

    2014-02-26

    Former Sandian Dan Neal started his company, WaveFront Sciences, based on wavefront sensing metrology technologies licensed from Sandia National Laboratories and by taking advantage of its Entrepreneurial Separation to Transfer Technology (ESTT) program. Abbott Medical Optics since acquired WaveFront and estimates that one million patients have improved the quality of their vision thanks to its products. ESTT is a valuable tool which allows Sandia to transfer technology to the private sector and Sandia employees to leave the Labs in order to start up new technology companies or help expand existing companies.

  5. Sandia technology & entrepreneurs improve Lasik

    SciTech Connect

    Neal, Dan; Turner, Tim

    2013-11-21

    Former Sandian Dan Neal started his company, WaveFront Sciences, based on wavefront sensing metrology technologies licensed from Sandia National Laboratories and by taking advantage of its Entrepreneurial Separation to Transfer Technology (ESTT) program. Abbott Medical Optics since acquired WaveFront and estimates that one million patients have improved the quality of their vision thanks to its products. ESTT is a valuable tool which allows Sandia to transfer technology to the private sector and Sandia employees to leave the Labs in order to start up new technology companies or help expand existing companies.

  6. Development of the Sandia Cooler.

    SciTech Connect

    Johnson, Terry Alan; Koplow, Jeffrey P.; Staats, Wayne Lawrence,; Curgus, Dita Brigitte; Leick, Michael Thomas.; Matthew, Ned Daniel; Zimmerman, Mark D.; Arienti, Marco; Gharagozloo, Patricia E.; Hecht, Ethan S.; Spencer, Nathan A.; Vanness, Justin William.; Gorman, Ryan

    2013-12-01

    This report describes an FY13 effort to develop the latest version of the Sandia Cooler, a breakthrough technology for air-cooled heat exchangers that was developed at Sandia National Laboratories. The project was focused on fabrication, assembly and demonstration of ten prototype systems for the cooling of high power density electronics, specifically high performance desktop computers (CPUs). In addition, computational simulation and experimentation was carried out to fully understand the performance characteristics of each of the key design aspects. This work culminated in a parameter and scaling study that now provides a design framework, including a number of design and analysis tools, for Sandia Cooler development for applications beyond CPU cooling.

  7. Sandia Technology engineering and science accomplishments

    SciTech Connect

    Not Available

    1994-02-01

    This report briefly discusses the following research being conducted at Sandia Laboratories: Advanced Manufacturing -- Sandia technology helps keep US industry in the lead; Microelectronics-Sandia`s unique facilities transform research advances into manufacturable products; Energy -- Sandia`s energy programs focus on strengthening industrial growth and political decisionmaking; Environment -- Sandia is a leader in environmentally conscious manufacturing and hazardous waste reduction; Health Care -- New biomedical technologies help reduce cost and improve quality of health care; Information & Computation -- Sandia aims to help make the information age a reality; Transportation -- This new initiative at the Labs will help improve transportation, safety,l efficiency, and economy; Nonproliferation -- Dismantlement and arms control are major areas of emphasis at Sandia; and Awards and Patents -- Talented, dedicated employees are the backbone of Sandia`s success.

  8. Analysis of the impact of the regulation of toxic substances on Sandia

    SciTech Connect

    Arnold, C. Jr.; Pigg, J.

    1980-10-01

    In recent years, Congress has passed two regulatory acts, namely the Occupational Safety and Health Act (OSHA) and the Toxic Substance Control Act (TSCA) which seek to control the manufacture, use, and disposal of hazardous chemical substances. These acts can have a significant impact on Sandia's missions and will particularly affect those organizations involved in materials development and selection. The primary purpose of this report is to describe in some detail the impact of these acts on Sandia's corporate goals and make recommendations on what our response should be. Also described in this report is the present position of Sandia with respect to these regulatory acts and the policies and actions that Sandia has taken to date in an effort to minimize their impact.

  9. Sandia ATM SONET Interface Logic

    Energy Science and Technology Software Center (ESTSC)

    1994-07-21

    SASIL is used to program the EPLD's (Erasable Programmable Logic Devices) and PAL's (Programmable Array Logic) that make up a large percentage of the Sandia ATM SONET Interface (OC3 version) for the INTEL Paragon.

  10. Sandia and the Waste Isolation Pilot Plant, 1974--1999

    SciTech Connect

    MORA,CARL J.

    2000-04-11

    Engineers have learned to design and build big projects, which certainly describes the WIPP project, but also includes defense projects, highway networks, space exploration, the Internet, etc., through what has been called a messily complex embracing of contradictions. When something massive and complicated has to be built these days, it leads to a protracted political process in which every special interest makes a stand, lobbyists exert what influence they can, lawmakers bicker, contractors change things, Congress struggles with costs, environmentalists hold things up--and this is good. It may seem amazing that anything gets done, but when it does, everyone has had their say. It's an intensely democratic, even if expensive and time-consuming, process. The corporate historian of Sandia National Laboratories presents a unique background of the WIPP project and Sandia's part in it.

  11. Tiger Team assessment of the Sandia National Laboratories, Albuquerque

    SciTech Connect

    Not Available

    1991-05-01

    This report documents the Tiger Team Assessment of Sandia National Laboratories (SNL), Albuquerque, located in Albuquerque, New Mexico. SNL, Albuquerque, is operated by the Sandia Corporation (a wholly owned subsidiary of the American Telephone and Telegraph Company) for the US Department of Energy (DOE). The environmental assessment also included DOE tenant facilities at Ross Aviation, Albuquerque Microelectronics Operation, and the Central Training Academy. The assessment was conducted from April 15 to May 24, 1991, under the auspices of DOE's Office of Special Projects under the Assistant Secretary for Environment, Safety and Health (ES H). The assessment was comprehensive, encompassing ES H disciplines, management, self-assessments, and quality assurance; transportation; and waste management operations. Compliance with applicable federal, state, and local regulations; applicable DOE Orders; best management practices; and internal SNL, Albuquerque, requirements were assessed. In addition, an evaluation of the adequacy and effectiveness of DOE and SNL, Albuquerque management of ES H programs was conducted.

  12. SandiaMRCR

    Energy Science and Technology Software Center (ESTSC)

    2012-01-05

    SandiaMCR was developed to identify pure components and their concentrations from spectral data. This software efficiently implements the multivariate calibration regression alternating least squares (MCR-ALS), principal component analysis (PCA), and singular value decomposition (SVD). Version 3.37 also includes the PARAFAC-ALS Tucker-1 (for trilinear analysis) algorithms. The alternating least squares methods can be used to determine the composition without or with incomplete prior information on the constituents and their concentrations. It allows the specification of numerousmore » preprocessing, initialization and data selection and compression options for the efficient processing of large data sets. The software includes numerous options including the definition of equality and non-negativety constraints to realistically restrict the solution set, various normalization or weighting options based on the statistics of the data, several initialization choices and data compression. The software has been designed to provide a practicing spectroscopist the tools required to routinely analysis data in a reasonable time and without requiring expert intervention.« less

  13. Sandia technology engineering and science accomplishments

    NASA Astrophysics Data System (ADS)

    1994-02-01

    This report briefly discusses the following research being conducted at Sandia Laboratories: Advanced Manufacturing -- Sandia technology helps keep US industry in the lead; Microelectronics -- Sandia's unique facilities transform research advances into manufacturable products; Energy -- Sandia's energy programs focus on strengthening industrial growth and political decisionmaking; Environment -- Sandia is a leader in environmentally conscious manufacturing and hazardous waste reduction; Health Care -- New biomedical technologies help reduce cost and improve quality of health care; Information & Computation -- Sandia aims to help make the information age a reality; Transportation -- This new initiative at the Labs will help improve transportation, safety, efficiency, and economy; Nonproliferation -- Dismantlement and arms control are major areas of emphasis at Sandia; and Awards and Patents -- Talented, dedicated employees are the backbone of Sandia's success.

  14. A Sandia telephone database system

    SciTech Connect

    Nelson, S.D.; Tolendino, L.F.

    1991-08-01

    Sandia National Laboratories, Albuquerque, may soon have more responsibility for the operation of its own telephone system. The processes that constitute providing telephone service can all be improved through the use of a central data information system. We studied these processes, determined the requirements for a database system, then designed the first stages of a system that meets our needs for work order handling, trouble reporting, and ISDN hardware assignments. The design was based on an extensive set of applications that have been used for five years to manage the Sandia secure data network. The system utilizes an Ingres database management system and is programmed using the Application-By-Forms tools.

  15. Environmental assessment of the Environmental Restoration Project at Sandia National Laboratories/New Mexico

    SciTech Connect

    1996-03-01

    Sandia National Laboratories/New Mexico (SNL/NM) is managed and operated for the U.S. Department of Energy (DOE) by Sandia Corporation, a subsidiary of the Lockheed Martin Company. SNL/NM is located on land controlled by DOE within the boundaries of Kirtland Air Force Base (KAFB) in Albuquerque, New Mexico. The major responsibilities of SNL/NM are the support of national security and energy projects. This report provides an environmental assessment of proposed remedial action activities at the solid waste management units at SNL/NM. A risk assessment of health hazards is also discussed.

  16. Site Environmental Report for 2010 Sandia National Laboratories, California.

    SciTech Connect

    Larsen, Barbara L.

    2011-06-01

    Sandia National Laboratories, California (SNL/CA) is a government-owned/contractor-operated laboratory. Sandia Corporation, a Lockheed Martin Company, manages and operates the laboratory for the Department of Energy's National Nuclear Security Administration (NNSA). The NNSA Sandia Site Office administers the contract and oversees contractor operations at the site. This Site Environmental Report for 2010 was prepared in accordance with DOE Order 231.1A (DOE 2004a). The report provides a summary of environmental monitoring information and compliance activities that occurred at SNL/CA during calendar year 2010. General site and environmental program information is also included. The Site Environmental Report is divided into ten chapters. Chapter 1, the Executive Summary, highlights compliance and monitoring results obtained in 2010. Chapter 2 provides a brief introduction to SNL/CA and the existing environment found on site. Chapter 3 summarizes SNL/CA's compliance activities with the major environmental requirements applicable to site operations. Chapter 4 presents information on environmental management, performance measures, and environmental programs. Chapter 5 presents the results of monitoring and surveillance activities in 2010. Chapter 6 discusses quality assurance. Chapters 7 through 9 provide supporting information for the report and Chapter 10 is the report distribution list.

  17. Sandia Combustion Research: Technical review

    SciTech Connect

    1995-07-01

    This report contains reports from research programs conducted at the Sandia Combustion Research Facility. Research is presented under the following topics: laser based diagnostics; combustion chemistry; reacting flow; combustion in engines and commercial burners; coal combustion; and industrial processing. Individual projects were processed separately for entry onto the DOE databases.

  18. Corporal Punishment.

    ERIC Educational Resources Information Center

    Ball, Joan

    1989-01-01

    The National PTA opposes the use of corporal punishment in schools. Several states and foreign countries have banned this form of discipline, and studies show it to be ineffective. Alternative methods of controlling student behaviors are suggested. (IAH)

  19. Sandia's mentoring program : an ongoing success.

    SciTech Connect

    Brewer, Soila

    2003-12-01

    This report summarizes the Mentoring Program at Sandia National Laboratories (SNL), which has been an on-going success since its inception in 1995. The Mentoring Program provides a mechanism to develop a workforce able to respond to changing requirements and complex customer needs. The program objectives are to enhance employee contributions through increased knowledge of SNL culture, strategies, and programmatic direction. Mentoring is a proven mechanism for attracting new employees, retaining employees, and developing leadership. It helps to prevent the loss of corporate knowledge from attrition and retirement, and it increases the rate and level of contributions of new managers and employees, also spurring cross-organizational teaming. The Mentoring Program is structured as a one-year partnership between an experienced staff member or leader and a less experienced one. Mentors and mentees are paired according to mutual objectives and interests. Support is provided to the matched pairs from their management as well as division program coordinators in both New Mexico and California locations. In addition, bi-monthly large-group training sessions are held.

  20. Committee to evaluate Sandia`s risk expertise: Final report. Volume 1: Presentations

    SciTech Connect

    Dudley, E.C.

    1998-05-01

    On July 1--2, 1997, Sandia National Laboratories hosted the External Committee to Evaluate Sandia`s Risk Expertise. Under the auspices of SIISRS (Sandia`s International Institute for Systematic Risk Studies), Sandia assembled a blue-ribbon panel of experts in the field of risk management to assess their risk programs labs-wide. Panelists were chosen not only for their own expertise, but also for their ability to add balance to the panel as a whole. Presentations were made to the committee on the risk activities at Sandia. In addition, a tour of Sandia`s research and development programs in support of the US Nuclear Regulatory Commission was arranged. The panel attended a poster session featuring eight presentations and demonstrations for selected projects. Overviews and viewgraphs from the presentations are included in Volume 1 of this report. Presentations are related to weapons, nuclear power plants, transportation systems, architectural surety, environmental programs, and information systems.

  1. Sandia Helicopter Acoustic Detector (SHAD)

    NASA Astrophysics Data System (ADS)

    Arlowe, H. D.

    1982-05-01

    The Sandia Helicopter Acoustic Detector was developed to provide a low cost alternative to radar for countering the helicopter threat at new DOE facilities. The main buildings of these new designs are generally hardened to provide significant delay to a helicopter borne adversary team. Under these circumstances the sensor is only required to detect helicopters that are in their final landing phase and at close range (less than 75 m). This short detection range allows the use of a fairly simple acoustic detection algorithm without making the system overly sensitive to wind noise, motor vehicles, and ventilation/heat exchange blowers. This work was sponsored by the Department of Energy/Office of Safeguards and Security as part of the overall Sandia Fixed Facility Physical Protection Program.

  2. A report on FY06 IPv6 deployment activities and issues at Sandia National Laboratories.

    SciTech Connect

    Tolendino, Lawrence F.; Eldridge, John M.; Hu, Tan Chang

    2006-06-01

    Internet Protocol version 4 (IPv4) has been a mainstay of the both the Internet and corporate networks for delivering network packets to the desired destination. However, rapid proliferation of network appliances, evolution of corporate networks, and the expanding Internet has begun to stress the limitations of the protocol. Internet Protocol version 6 (IPv6) is the replacement protocol that overcomes the constraints of IPv4. IPv6 deployment in government network backbones has been mandated to occur by 2008. This paper explores the readiness of the Sandia National Laboratories' network backbone to support IPv6, the issues that must be addressed before a deployment begins, and recommends the next steps to take to comply with government mandates. The paper describes a joint, work effort of the Sandia National Laboratories ASC WAN project team and members of the System Analysis & Trouble Resolution and Network System Design & Implementation Departments.

  3. Photometrics at Sandia National Laboratories

    SciTech Connect

    McWilliams, J.Y.; Hill, R.A.; Hughes, R.L.

    1990-07-01

    This report highlights Sandia National Laboratories' work in the following areas: photometrics and optical development; still and time-lapse photography; real-time motion photography; high-speed photography; image-motion photography; schlieren photography; ultra-high-speed photography; electronic imaging; shuttered video and high-speed video; infrared imaging radiometry; exoatmospheric photography and videography; microdensitometry and image analysis; and optical system design and development.

  4. Corporal punishment.

    PubMed

    Zolotor, Adam J

    2014-10-01

    Corporal punishment is used for discipline in most homes in the United States. It is also associated with a long list of adverse developmental, behavioral, and health-related consequences. Primary care providers, as trusted sources for parenting information, have an opportunity to engage parents in discussions about discipline as early as infancy. These discussions should focus on building parents' skills in the use of other behavioral techniques, limiting (or eliminating) the use of corporal punishment and identifying additional resources as needed. PMID:25242709

  5. Annual Site Environment Report Summary Pamphlet, Sandia National Laboratories, New Mexico

    SciTech Connect

    2010-01-01

    Sandia collects environmental data to determine and report the impact of existing SNL/NM operations on the environment. Sandia’s environmental programs include air and water quality, environmental monitoring and surveillance, and activities associated with the National Environmental Policy Act (NEPA). Sandia’s objective is to maintain compliance with federal, state, and local requirements, and to affect the corporate culture so that environmental compliance practices continue to be an integral part of operations.

  6. Mobile robotics research at Sandia National Laboratories

    SciTech Connect

    Morse, W.D.

    1998-09-01

    Sandia is a National Security Laboratory providing scientific and engineering solutions to meet national needs for both government and industry. As part of this mission, the Intelligent Systems and Robotics Center conducts research and development in robotics and intelligent machine technologies. An overview of Sandia`s mobile robotics research is provided. Recent achievements and future directions in the areas of coordinated mobile manipulation, small smart machines, world modeling, and special application robots are presented.

  7. Energy Efficient Legged Robotics at Sandia Labs

    SciTech Connect

    Buerger, Steve

    2014-12-16

    Sandia is developing energy efficient actuation and drive train technologies to dramatically improve the charge life of legged robots. The work is supported by DARPA, and Sandia will demonstrate an energy efficient bipedal robot at the technology exposition section of the DARPA Robotics Challenge Finals in June, 2015. This video, the first in a series, describes early development and initial integration of the Sandia Transmission Efficient Prototype Promoting Research (STEPPR) robot.

  8. Corporate Raiding.

    ERIC Educational Resources Information Center

    Evelyn, Jamilah

    1999-01-01

    The search for college faculty members of color has led one organization to recruit doctoral candidates from the business world. Funded with $6 million in corporate sponsorship, the project subsidizes business professionals' doctoral study, helps run doctoral student associations, and brings students and business school officials to annual…

  9. Overview of Sandia`s Electric Vehicle Battery Program

    SciTech Connect

    Clark, R.P.

    1993-12-31

    Sandia National Laboratories is actively involved several projects which are part of an overall Electric Vehicle Battery Program. Part of this effort is funded by the United States Department of Energy/Office of Transportation Technologies (DOE/OTT) and the remainder is funded through the United States Advanced Battery Consortium (USABC). DOE/OTT supported activities include research and development of zinc/air and sodium/sulfur battery technologies as well as double layer capacitor (DLC) R&D. Projects in the USABC funded work include lithium/polymer electrolyte (LPE) R&D, sodium/sulfur activities and battery test and evaluation.

  10. Environmental Assessment and Finding of No Significant Impact: The Proposed Issuance of an Easement to Public Service Company of New Mexico for the Construction and Operation of a 12-inch Natural Gas Pipeline within Los Alamos National Laboratory, Los Alamos, New Mexico

    SciTech Connect

    N /A

    2002-07-30

    The National Nuclear Security Administration (NNSA) has assigned a continuing role to Los Alamos National Laboratory (LANL) in carrying out NNSAs national security mission. To enable LANL to continue this enduring responsibility requires that NNSA maintain the capabilities and capacities required in support of its national mission assignments at LANL. To carry out its Congressionally assigned mission requirements, NNSA must maintain a safe and reliable infrastructure at LANL. Upgrades to the various utility services at LANL have been ongoing together with routine maintenance activities over the years. However, the replacement of a certain portion of natural gas service transmission pipeline is now necessary as this delivery system element has been operating well beyond its original design life for the past 20 to 30 years and components of the line are suffering from normal stresses, strains, and general failures. The Proposed Action is to grant an easement to the Public Service Company of New Mexico (PNM) to construct, operate, and maintain approximately 15,000 feet (4,500 meters) of 12-inch (in.) (30-centimeter [cm]) coated steel natural gas transmission mainline on NNSA-administered land within LANL along Los Alamos Canyon. The new gas line would begin at the existing valve setting located at the bottom of Los Alamos Canyon near the Los Alamos County water well pump house and adjacent to the existing 12-in. (30-cm) PNM gas transmission mainline. The new gas line (owned by PNM) would then cross the streambed and continue east in a new easement obtained by PNM from the NNSA, paralleling the existing electrical power line along the bottom of the canyon. The gas line would then turn northeast near State Road (SR) 4 and be connected to the existing 12-in. (30-cm) coated steel gas transmission mainline, located within the right-of-way (ROW) of SR 502. The Proposed Action would also involve crossing a streambed twice. PNM would bore under the streambed for pipe

  11. SANDIA MOUNTAIN WILDERNESS, NEW MEXICO.

    USGS Publications Warehouse

    Hedlund, D.C.; Kness, R.F.

    1984-01-01

    Geologic and mineral-resource investigations in the Sandia Mountains in New Mexico indicate that a small part of the area has a probable mineral-resource potential. Most of the mineral occurrences are small barite-fluorite veins that occur along faults on the eastern slope of the range. The barite veins in the Landsend area and in the Tunnel Spring area are classed as having a probable mineral-resource potential. Fluorite veins which occur at the La Luz mine contain silver-bearing galeana and the area near this mine is regarded as having a probable resource potential for silver. No energy resources were identified in this study.

  12. Sandia software guidelines, Volume 4: Configuration management

    SciTech Connect

    Not Available

    1992-06-01

    This volume is one in a series of Sandia Software Guidelines for use in producing quality software within Sandia National Laboratories. This volume is based on the IEEE standard and guide for software configuration management. The basic concepts and detailed guidance on implementation of these concepts are discussed for several software project types. Example planning documents for both projects and organizations are included.

  13. Sandia software guidelines: Software quality planning

    SciTech Connect

    Not Available

    1987-08-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies procedures to follow in producing a Software Quality Assurance Plan for an organization or a project, and provides an example project SQA plan. 2 figs., 4 tabs.

  14. Implementing the Corrective Action Management Unit at Sandia National Laboratories, New Mexico

    SciTech Connect

    MOORE,DARLENE R.; SCHRADER,SCOTT A.; KING,GABRIEL G.; CORMIER,JOHN

    2000-01-26

    In September 1997, following significant public and regulator interaction, Sandia Corporation (Sandia) was granted a Resource Conservation and Recovery Act (RCRA) and Hazardous Solid Waste Amendment (HSWA) permit modification allowing construction and operation of a Correction Action Management Unit (CAMU). The CAMU follows recent regulatory guidance that allows for cost-effective, expedient cleanup of contaminated sites and management of hazardous remediation wastes. The CAMU was designed to store, treat, and provide long-term management for Environmental Restoration (ER) derived wastes. The 154 square meter CAMU site at Sandia National Laboratories, New Mexico (SNL/NM), includes facilities for storing bulk soils and containerized wastes, for treatment of bulk soils, and has a containment cell for long-term disposition of waste. Proposed treatment operations include soil washing and low temperature thermal desorption. The first waste was accepted into the CAMU for temporary storage in January 1999. Construction at the CAMU was completed in March 1999, and baseline monitoring of the containment cell has commenced. At completion of operations the facility will be closed, the waste containment cell will be covered, and long-term post-closure monitoring will begin. Sandia's CAMU is the only such facility within the US Department of Energy (DOE) complex. Implementing this innovative approach to ER waste management has required successful coordination with community representatives, state and federal regulators, the DOE, Sandia corporate management, and contractors. It is expected that cost savings to taxpayers will be significant. The life-cycle CAMU project cost is currently projected to be approximately $12 million.

  15. Sandia National Laboratories analysis code data base

    SciTech Connect

    Peterson, C.W.

    1994-11-01

    Sandia National Laboratories, mission is to solve important problems in the areas of national defense, energy security, environmental integrity, and industrial technology. The Laboratories` strategy for accomplishing this mission is to conduct research to provide an understanding of the important physical phenomena underlying any problem, and then to construct validated computational models of the phenomena which can be used as tools to solve the problem. In the course of implementing this strategy, Sandia`s technical staff has produced a wide variety of numerical problem-solving tools which they use regularly in the design, analysis, performance prediction, and optimization of Sandia components, systems and manufacturing processes. This report provides the relevant technical and accessibility data on the numerical codes used at Sandia, including information on the technical competency or capability area that each code addresses, code ``ownership`` and release status, and references describing the physical models and numerical implementation.

  16. Environmental assessment for Sandia National Laboratories/New Mexico offsite transportation of low-level radioactive waste

    SciTech Connect

    1996-09-01

    Sandia National Laboratories, New Mexico (SNL/NM) is managed and operated by Sandia Corporation, a Lockheed Martin Company. SNL/NM is located on land owned by the U.S. Department of Energy (DOE) within the boundaries of the Kirtland Air Force Base (KAFB) in Albuquerque, New Mexico. The major responsibilities of SNL/NM are the support of national security and energy projects. Low-level radioactive waste (LLW) is generated by some of the activities performed at SNL/NM in support of the DOE. This report describes potential environmental effects of the shipments of low-level radioactive wastes to other sites.

  17. Aerosciences at Sandia National Labs.

    SciTech Connect

    Payne, Jeffrey L.

    2010-10-01

    A brief overview of Sandia National Laboratories will be presented highlighting the mission of Engineering Science Center. The Engineering Science Center provides a wide range of capabilities to support the lab's missions. As part of the Engineering Science Center the Aeroscience department provides research, development and application expertise in both experimental and computation compressible fluid mechanics. The role of Aeroscience at Sandia National Labs will be discussed with a focus on current research and development activities within the Aeroscience Department. These activities will be presented within the framework of a current program to highlight the synergy between computational and experimental work. The research effort includes computational and experimental activities covering fluid and structural dynamics disciplines. The presentation will touch on: probable excitation sources that yield the level of random vibration observed during flight; the methods that have been developed to model the random pressure fields in the turbulent boundary layer using a combination of CFD codes and a model of turbulent boundary layer pressure fluctuations; experimental measurement of boundary layer fluctuations; the methods of translating the random pressure fields to time-domain spatially correlated pressure fields.

  18. Sandia fracture challenge 2: Sandia California's modeling approach

    DOE PAGESBeta

    Karlson, Kyle N.; James W. Foulk, III; Brown, Arthur A.; Veilleux, Michael G.

    2016-03-09

    The second Sandia Fracture Challenge illustrates that predicting the ductile fracture of Ti-6Al-4V subjected to moderate and elevated rates of loading requires thermomechanical coupling, elasto-thermo-poro-viscoplastic constitutive models with the physics of anisotropy and regularized numerical methods for crack initiation and propagation. We detail our initial approach with an emphasis on iterative calibration and systematically increasing complexity to accommodate anisotropy in the context of an isotropic material model. Blind predictions illustrate strengths and weaknesses of our initial approach. We then revisit our findings to illustrate the importance of including anisotropy in the failure process. Furthermore, mesh-independent solutions of continuum damage modelsmore » having both isotropic and anisotropic yields surfaces are obtained through nonlocality and localization elements.« less

  19. INFORMATION: Inspection Report on "Removal of Categories I and II Special Nuclear Material from Sandia National Laboratories-New Mexico"

    SciTech Connect

    2010-01-01

    The Department of Energy's (DOE's) Sandia National Laboratories-New Mexico (Sandia) develops science-based technologies in support of national security in areas such as nuclear weapons, nonproliferation, military technologies, and homeland security. Sandia's primary mission is ensuring that the U.S. nuclear arsenal is safe, secure, and reliable and can fully support the Nation's deterrence policy. Part of this mission includes systems engineering of nuclear weapons; research, design, and development of non-nuclear components; manufacturing of non-nuclear weapons components; the provision of safety, security, and reliability assessments of stockpile weapons; and the conduct of high-explosives research and development and environmental testing. Sandia Corporation, a subsidiary of Lockheed Martin Corporation, operates Sandia for the National Nuclear Security Administration (NNSA). On May 7, 2004, the Secretary announced that the Department would evaluate missions at DOE sites to consolidate Special Nuclear Material (SNM) in the most secure environments possible. The Administrator of the NNSA said that this effort was a key part of an overall plan to transform the nuclear weapons complex into a smaller, safer, more secure, and more efficient national security enterprise. In February 2008, Sandia was the first site to report it had reduced its on-site inventory of nuclear material below 'Categories I and II' levels, which require the highest level of security to protect material such as plutonium and highly enriched uranium. The Office of Inspector General initiated an inspection to determine if Sandia made appropriate adjustments to its security posture in response to the removal of the Categories I and II SNM. We found that Sandia adjusted its security posture in response to the removal of Categories I and II SNM. For example, security posts were closed; unneeded protective force weapons and equipment were excessed from the site; and, Sandia's Site Safeguards and

  20. Gentris corporation.

    PubMed

    Crean, Jennifer

    2002-01-01

    Gentris Corporation is engaged in the development and rapid commercialization of innovative proprietary clinical pharmacogenomic products and services. The company provides global pharmaceutical research organizations with turn-key pharmacogenomic solutions to improve the efficiency and predictability of drug development. The ultimate benefit to these organizations is to shorten drug development cycles, improve new drug approval rates and allow marginal drugs to advance towards final approval. In the near future, the company will develop specialized, high quality, reliable diagnostic products, which will provide physicians and their patients with access to pharmacogenomic testing, as personalized medicine becomes the new standard of medical practice. PMID:11966411

  1. Sandia software guidelines: Volume 5, Tools, techniques, and methodologies

    SciTech Connect

    Not Available

    1989-07-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. This volume describes software tools and methodologies available to Sandia personnel for the development of software, and outlines techniques that have proven useful within the Laboratories and elsewhere. References and evaluations by Sandia personnel are included. 6 figs.

  2. Sandia Wind Turbine Loads Database

    DOE Data Explorer

    The Sandia Wind Turbine Loads Database is divided into six files, each corresponding to approximately 16 years of simulation. The files are text files with data in columnar format. The 424MB zipped file containing six data files can be downloaded by the public. The files simulate 10-minute maximum loads for the NREL 5MW wind turbine. The details of the loads simulations can be found in the paper: “Decades of Wind Turbine Loads Simulations”, M. Barone, J. Paquette, B. Resor, and L. Manuel, AIAA2012-1288 (3.69MB PDF). Note that the site-average wind speed is 10 m/s (class I-B), not the 8.5 m/s reported in the paper.

  3. Z Machine at Sandia Labs

    SciTech Connect

    2007-10-17

    Sandia Labs' Z machine is the largest laboratory source of x-rays in the world. For the few nanoseconds of a Z Machine test, its electrical output equals the output of 50x the electrical generating stations of all the power plants on earth. The Z Machine complex encompasses an area roughly the size of a major college basketball arena. Originally created to validate nuclear weapons models, the Z Machine is also considered a "dark horse" in the race for viable fusion energy production. After the famous "arcs and sparks" photo of Z (a photo no longer possible after its refurbishment), this is a fast-motion video of workers completing Z's recent refurbishment.

  4. Building business from technology: The Sandia experience

    SciTech Connect

    Traylor, L.B.

    1995-07-01

    This paper describes New Ventures, a new initiative at Sandia National Laboratories that encourages the creation of new businesses based on laboratory technology as a timely, efficient means of technology transfer. Sandia`s New Ventures program has shown that a dedicated effort can produce significant results. In the three years prior to this program`s launch, just two ventures per year on average were created based on laboratory technology. By comparison, the New Ventures program has enabled 20 new ventures in its first nine months of full operation.

  5. Magnetic Field Measurements using Zeeman splitting on the SMP Diode at Sandia National Laboratories

    NASA Astrophysics Data System (ADS)

    Patel, Sonal; Johnston, Mark; Webb, Timothy; Maron, Yitzhak; Muron, David; Keifer, Mark; Gilgenbach, Ronald

    2015-11-01

    Self-Magnetic Pinch (SMP) diode experiments are in progress at the RITS-6 accelerator (5-11 MV, 100-200 kA) at Sandia National Laboratories. A hollow cathode emits electrons through an approximately 1-cm vacuum A-K gap onto a high-Z material. The high current compresses the electron beam to a few mm spot for use in flash x-ray radiography. Visible spectra of the diode plasma have been taken during the radiation pulse using a high resolution (0.6 A) spectrometer and a lens coupled fiber array focused across the anode surface of the diode. Zeeman splitting measurements of CIV and Al III suggest magnetic fields of 3-4 T a few mm off the diode axis. These measurements yield current density profiles near the target surface. Work supported by Sandia National Laboratories which is a multiprogram lab managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation for the U.S. Department of Energy's National Nuclear Security Administration.

  6. Leadership development study :success profile competencies and high-performing leaders at Sandia National Laboratories.

    SciTech Connect

    Becker, Katherine M.; Mulligan, Deborah Rae; Szenasi, Gail L.; Crowder, Stephen Vernon

    2005-04-01

    Sandia is undergoing tremendous change. Sandia's executive management recognized the need for leadership development. About ten years ago the Business, Leadership, and Management Development department in partnership with executive management developed and implemented the organizational leadership Success Profile Competencies to help address some of the changes on the horizon such as workforce losses and lack of a skill set in the area of interpersonal skills. This study addresses the need for the Business, Leadership, and Management Development department to provide statistically sound data in two areas. One is to demonstrate that the organizational 360-degree success profile assessment tool has made a difference for leaders. A second area is to demonstrate the presence of high performing leaders at the Labs. The study utilized two tools to address these two areas. Study participants were made up of individuals who have solid data on Sandia's 360-degree success profile assessment tool. The second assessment tool was comprised of those leaders who participated in the Lockheed Martin Corporation Employee Preferences Survey. Statistical data supports the connection between leader indicators and the 360-degree assessment tool. The study also indicates the presence of high performing leaders at Sandia.

  7. Corporate Jet

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Gulfstream Aerospace Corporation, Savannah, GA, used a version of a NASA program called WIBCO to design a wing for the Gulfstream IV (G-IV) which will help to reduce transonic drag (created by shock waves that develop as an airplane approaches the speed of sound). The G-IV cruises at 88 percent of the speed of sound, and holds the international record in its class for round-the-world flight. They also used the STANS5 and Profile programs in the design. They will use the NASA program GASP to help determine the gross weight, range, speed, payload and optimum wing area of an intercontinental supersonic business jet being developed in cooperation with Sukhoi Design Bureau, a Soviet organization.

  8. Metamaterials program at Sandia National Laboratories.

    SciTech Connect

    McCormick, Frederick Bossert

    2010-10-01

    Sandia National Laboratories Metamaterial Science and Technology Program has developed novel HPC-based design tools, wafer scale 3D fabrication processes, and characterization tools to enable thermal IR optical metamaterial application studies.

  9. Sandia programs relevant to microelectronics fabrication

    SciTech Connect

    Picraux, S.T.; Vook, F.L.; Gregory, B.L.

    1987-04-01

    This report was prepared for the Semiconductor Industry and the National Laboratories Workshop held at the National Academy of Sciences, Washington, DC, February 24, 1987. It details the current Sandia program activities relevant to microelectronics fabrication.

  10. SASIL. Sandia ATM SONET Interface Logic

    SciTech Connect

    Kitta, J.P.

    1994-07-01

    SASIL is used to program the EPLD`s (Erasable Programmable Logic Devices) and PAL`s (Programmable Array Logic) that make up a large percentage of the Sandia ATM SONET Interface (OC3 version) for the INTEL Paragon.

  11. The Sandia Lightning Simulator Recommissioning and upgrades.

    SciTech Connect

    Martinez, Leonard E.; Caldwell, Michele

    2005-08-01

    The Sandia lightning simulator at Sandia National Laboratories can provide up to 200 kA for a simulated single lightning stroke, 100 kA for a subsequent stroke, and hundreds of Amperes of continuing current. It has recently been recommissioned after a decade of inactivity and the single-stroke capability demonstrated. The simulator capabilities, basic design components, upgrades, and diagnostic capabilities are discussed in this paper.

  12. Experiences implementing the MPI standard on Sandia`s lightweight kernels

    SciTech Connect

    Brightwell, R.; Greenberg, D.S.

    1997-10-01

    This technical report describes some lessons learned from implementing the Message Passing Interface (MPI) standard, and some proposed extentions to MPI, at Sandia. The implementations were developed using Sandia-developed lightweight kernels running on the Intel Paragon and Intel TeraFLOPS platforms. The motivations for this research are discussed, and a detailed analysis of several implementation issues is presented.

  13. Pathfinder radar development at Sandia National Laboratories

    NASA Astrophysics Data System (ADS)

    Castillo, Steven

    2016-05-01

    Since the invention of Synthetic Aperture Radar imaging in the 1950's, users or potential users have sought to exploit SAR imagery for a variety of applications including the earth sciences and defense. At Sandia Laboratories, SAR Research and Development and associated defense applications grew out of the nuclear weapons program in the 1980's and over the years has become a highly viable ISR sensor for a variety of tactical applications. Sandia SAR systems excel where real-­-time, high-­-resolution, all-­-weather, day or night surveillance is required for developing situational awareness. This presentation will discuss the various aspects of Sandia's airborne ISR capability with respect to issues related to current operational success as well as the future direction of the capability as Sandia seeks to improve the SAR capability it delivers into multiple mission scenarios. Issues discussed include fundamental radar capabilities, advanced exploitation techniques and human-­-computer interface (HMI) challenges that are part of the advances required to maintain Sandia's ability to continue to support ever changing and demanding mission challenges.

  14. Overview of Sandia's storage battery program

    NASA Astrophysics Data System (ADS)

    Clark, R. P.; Grothaus, K. R.

    The primary mission of Sandia National Laboratories is the design and development of the non-nuclear components and systems for nuclear weapons. To a lesser degree, Sandia is also involved in a variety of other programs; such as, energy projects with the Department of Energy, conventional military projects with the Department of Defense, and nuclear waste management and reactor safety with the Nuclear Regulatory Commission. Over the years, Sandia has evolved a considerable expertise in the areas of specialty primary, reserve, and more recently, secondary battery systems. This paper focuses on the status of the storage or secondary battery programs. These programs are divided into those battery systems being developed for energy applications and those being developed for military applications.

  15. Defense programs: A Sandia weapon review bulletin

    SciTech Connect

    Floyd, H.L.; Goetsch, B.; Doran, L.

    1993-11-01

    Sandia`s mission to explore technology that enhances US nuclear weapons capabilities has been the primary impetus for the development of a class of inertial measurement units not available commercially. The newest member of the family is the Ring Laser Gyro Assembly. The product of a five-year joint effort by Sandia and Honeywell`s Space and Strategic Systems Operation, the RLGA is a small, one-nautical-mile-per-hour-class inertial measurement unit that consumes only 16 watts - attributes that are important to a guidance and control capability for new or existing weapons. These same attributes led the Central Inertial Guidance Test Facility at Holloman Air Force Base to select the RLGA for their newest test instrumentation pod. The RLGA sensor assembly is composed of three Honeywell ring laser gyroscopes and three Sundstrand Data Control accelerometers that are selected from three types according to the user`s acceleration range and accuracy needs.

  16. Laser materials processing at Sandia National Laboratories

    SciTech Connect

    Jellison, J.L.; Cieslak, M.J.

    1994-11-01

    The interest in laser processing has been driven by Sandia`s responsibility to design, prototype, manufacture, and steward high reliability defense hardware for the Department of Energy. The system requirements for the hardware generally necessitate hermetic sealing for ensured long life operation. With the advent of miniaturized electronic devices, traditional welding processes were no longer practical choices because of their limited ability to make very small weld closures without heat damage to the hardware. Gas and solid state lasers offered the opportunity to make hermetic closure welds in small, heat sensitive hardware. In order to consistently produce quality product, the Sandia laser materials processing team performed research aimed at identifying those critical parameters which controlled the laser welding process. This has been directed towards both the development of quantitative engineering data needed in product design and process control, and research to achieve fundamental process understanding. In addition, they have developed novel diagnostic systems to measure these important parameters, pioneered the use of calorimetric techniques to measure energy transfer efficiencies, and correlated the occurrence of welding defects with alloy compositions and type of laser welding process. Today, Sandia`s laser materials processing team continues to advance the state of laser processing technology in many areas, including aluminum laser welding, the design of novel optics for specific laser processing needs, laser micromachining of silicon and diamond for microelectronics applications, and fluxless laser soldering. This paper will serve to highlight some examples of where Sandia has made contributions to the field of laser materials processing and will indicate the directions where they expect to focus their future efforts.

  17. Simulation and off-line programming at Sandia`s Intelligent Systems and Robotics Center

    SciTech Connect

    Xavier, P.G.; Fahrenholtz, J.C.; McDonald, M.

    1997-11-01

    One role of the Intelligent Robotics and System Center (ISRC) at Sandia National Laboratories is to address certain aspects of Sandia`s mission to design, manufacture, maintain, and dismantle nuclear weapon components. Hazardous materials, devices, and environments are often involved. Because of shrinking resources, these tasks must be accomplished with a minimum of prototyping, while maintaining high reliability. In this paper, the authors describe simulation, off-line programming/planning, and related tools which are in use, under development, and being researched to solve these problems at the ISRC.

  18. A user`s guide to LHS: Sandia`s Latin Hypercube Sampling Software

    SciTech Connect

    Wyss, G.D.; Jorgensen, K.H.

    1998-02-01

    This document is a reference guide for LHS, Sandia`s Latin Hypercube Sampling Software. This software has been developed to generate either Latin hypercube or random multivariate samples. The Latin hypercube technique employs a constrained sampling scheme, whereas random sampling corresponds to a simple Monte Carlo technique. The present program replaces the previous Latin hypercube sampling program developed at Sandia National Laboratories (SAND83-2365). This manual covers the theory behind stratified sampling as well as use of the LHS code both with the Windows graphical user interface and in the stand-alone mode.

  19. Sandia Software Guidelines, Volume 2. Documentation

    SciTech Connect

    1995-09-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standards for software documentation, this volume provides guidance in the selection of an adequate document set for a software project and example formats for many types of software documentation. A tutorial on life cycle documentation is also provided. Extended document thematic outlines and working examples of software documents are available on electronic media as an extension of this volume.

  20. Sandia Cognitive Runtime Engine with Active Memory

    Energy Science and Technology Software Center (ESTSC)

    2005-12-01

    The SCREAM (Sandia Cognitive Runtime Engine with Active memory) software implements a subset of a Cognitive Famework developed at Sandia National Laboratories. The software is implemented in the Umbra simulation and modular software framework, which is C++-based. SCREAM components include a Concept Instance Driver, Semantic Activation Network, Concept Database, Context Recognizer, Context Database, Episodic Memory, Egocentric Spatial Memory, Allocentric Spatial Memory, Comparator, and a Context to Abstract Action converter. At initialization, modules load the datamore » files that together specify all the components of a particular cognitive model, such as concept declarations, context declarations, spreading activation weights, and context/situation-cue-patterns.« less

  1. Sandia Cognitive Runtime Engine with Active Memory

    SciTech Connect

    Xavier, Patrick; Chen, Michael C.; Hart, Brian; Hart, Derek; Lippitt, Carl; Wolfenbarger, Paul; Waymire, Russel

    2005-12-01

    The SCREAM (Sandia Cognitive Runtime Engine with Active memory) software implements a subset of a Cognitive Famework developed at Sandia National Laboratories. The software is implemented in the Umbra simulation and modular software framework, which is C++-based. SCREAM components include a Concept Instance Driver, Semantic Activation Network, Concept Database, Context Recognizer, Context Database, Episodic Memory, Egocentric Spatial Memory, Allocentric Spatial Memory, Comparator, and a Context to Abstract Action converter. At initialization, modules load the data files that together specify all the components of a particular cognitive model, such as concept declarations, context declarations, spreading activation weights, and context/situation-cue-patterns.

  2. Technology transfer at Sandia National Laboratories

    SciTech Connect

    Allen, M.S.; Arvizu, D.E.

    1993-10-01

    Transferring technology to the private sector to help improve the competitiveness of key US industries is now an official mission of the US Department of Energy`s (DOE) defense program national laboratories. We believe that national laboratories can play an important role in addressing US industrial competitiveness. Sandia is seeking to match laboratory strengths with industry-defined market needs in targeted industrial sectors. Sandia, like other national and federal laboratories, is developing an aggressive technology transfer program. This paper provides a brief review of our program and provides a snap-shot of where we are at today.

  3. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan part 2 mappings for the ASC software quality engineering practices, version 2.0.

    SciTech Connect

    Heaphy, Robert; Sturtevant, Judith E.; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Minana, Molly A.; Hackney, Patricia; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2006-09-01

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR001.3.2 and CPR001.3.6 and to a Department of Energy document, ''ASCI Software Quality Engineering: Goals, Principles, and Guidelines''. This document also identifies ASC management and software project teams' responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  4. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1: ASC software quality engineering practices, Version 2.0.

    SciTech Connect

    Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Minana, Molly A.; Hackney, Patricia; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2006-09-01

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR 1.3.2 and 1.3.6 and to a Department of Energy document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines. This document also identifies ASC management and software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  5. Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan. Part 2, Mappings for the ASC software quality engineering practices. Version 1.0.

    SciTech Connect

    Ellis, Molly A.; Heaphy, Robert; Sturtevant, Judith E.; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2005-01-01

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR 1.3.2 and 1.3.6 and to a Department of Energy document, 'ASCI Software Quality Engineering: Goals, Principles, and Guidelines'. This document also identifies ASC management and software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  6. Sandia`s network for Supercomputer `96: Linking supercomputers in a wide area Asynchronous Transfer Mode (ATM) network

    SciTech Connect

    Pratt, T.J.; Martinez, L.G.; Vahle, M.O.

    1997-04-01

    The advanced networking department at Sandia National Laboratories has used the annual Supercomputing conference sponsored by the IEEE and ACM for the past several years as a forum to demonstrate and focus communication and networking developments. At Supercomputing 96, for the first time, Sandia National Laboratories, Los Alamos National Laboratory, and Lawrence Livermore National Laboratory combined their Supercomputing 96 activities within a single research booth under the ASO banner. Sandia provided the network design and coordinated the networking activities within the booth. At Supercomputing 96, Sandia elected: to demonstrate wide area network connected Massively Parallel Processors, to demonstrate the functionality and capability of Sandia`s new edge architecture, to demonstrate inter-continental collaboration tools, and to demonstrate ATM video capabilities. This paper documents those accomplishments, discusses the details of their implementation, and describes how these demonstrations support Sandia`s overall strategies in ATM networking.

  7. Pulsed power driven hohlraum research at Sandia National Laboratories

    SciTech Connect

    Leeper, R.J.; Alberts, T.E.; Allshouse, G.A.

    1996-06-01

    Three pulsed power driven hohlraum concepts are being investigated at Sandia for application to inertial fusion research. These hohlraums are driven by intense proton and Li ion beams as well as by two different types of z-pinch x-ray sources. Research on these hohlraum systems will continue on Sandia`s PBFA II-Z facility.

  8. Explosive detection program at Sandia National Laboratories

    SciTech Connect

    Conrad, F.J.

    1983-01-01

    A brief, general description of the Explosive Detection Program at Sandia National Laboratories is given. The six major topics of the program are: (1) Coated or Uncoated Metallic Preconcentrators; (2) a Derivatization Study; (3) a Portable Ion Mobility Spectrometer; (4) an Explosive Screening Portal; (5) Mass Spectrometer Development; and (6) an Explosive Vapor Generator.

  9. Rapid prototyping applications at Sandia National Laboratories

    NASA Astrophysics Data System (ADS)

    Atwood, C. L.; McCarty, G. D.; Pardo, B. T.; Bryce, E. A.

    In an effort to reduce the cycle time for producing prototypical mechanical and electro-mechanical components, Sandia National Laboratories has integrated rapid prototyping processes into the design and manufacturing process. The processes currently in operation within the Rapid Prototyping Laboratory are Stereolithography (SL), Selective Laser Sintering (SLS), and Direct Shell Production Casting (DSPC). These emerging technologies have proven to be valuable tools for reducing lead times and fabrication costs. Sandia uses the SL and SLS processes to support internal product development efforts. Their primary use is to fabricate patterns for investment casting in support of a Sandia-managed program called FASTCAST that integrates computational technologies and experimental data into the investment casting process. These processes are also used in the design iteration process to produce proof-of-concept models, hands-on models for design reviews, fit-check models, visual aids for manufacturing, and functional parts in assemblies. The DSPC process is currently being developed as a method of fabricating ceramic investment casting molds directly from a CAD solid model. Sandia is an Alpha machine test site for this process. This presentation will provide an overview of the SL and SLS processes and an update of our experience and success in integrating these technologies into the product development cycle. It will also provide a lead-in for a tour of the Rapid Prototyping Laboratory, where these processes will be demonstrated.

  10. SAPLE: Sandia Advanced Personnel Locator Engine.

    SciTech Connect

    Procopio, Michael J.

    2010-04-01

    We present the Sandia Advanced Personnel Locator Engine (SAPLE) web application, a directory search application for use by Sandia National Laboratories personnel. SAPLE's purpose is to return Sandia personnel 'results' as a function of user search queries, with its mission to make it easier and faster to find people at Sandia. To accomplish this, SAPLE breaks from more traditional directory application approaches by aiming to return the correct set of results while placing minimal constraints on the user's query. Two key features form the core of SAPLE: advanced search query interpretation and inexact string matching. SAPLE's query interpretation permits the user to perform compound queries when typing into a single search field; where able, SAPLE infers the type of field that the user intends to search on based on the value of the search term. SAPLE's inexact string matching feature yields a high-quality ranking of personnel search results even when there are no exact matches to the user's query. This paper explores these two key features, describing in detail the architecture and operation of SAPLE. Finally, an extensive analysis on logged search query data taken from an 11-week sample period is presented.

  11. Nuclear Facilities and Applied Technologies at Sandia

    SciTech Connect

    Wheeler, Dave; Kaiser, Krista; Martin, Lonnie; Hanson, Don; Harms, Gary; Quirk, Tom

    2014-11-28

    The Nuclear Facilities and Applied Technologies organization at Sandia National Laboratories’ Technical Area Five (TA-V) is the leader in advancing nuclear technologies through applied radiation science and unique nuclear environments. This video describes the organization’s capabilities, facilities, and culture.

  12. Reinventing Corporate Communications.

    ERIC Educational Resources Information Center

    Toth, Elizabeth L.; Trujillo, Nick

    1987-01-01

    Urges a "re-inventing" of corporate communications in today's organizations, and provides information about how corporations can change in new and positive ways during the current "information age." Discusses specific public relations and organizational communication concepts essential for a comprehensive understanding of corporate communications…

  13. Scaling the Corporate Heights.

    ERIC Educational Resources Information Center

    Campbell, Bebe Moore

    1983-01-01

    Reviews "Black Life in Corporate America" (Davis and Watson), "Women at Work: A Psychologist's Secrets to Getting Ahead in Business" (Senter), and "The Black Manager, Making It in the Corporate World" (Dickens and Dickens). All three books address general issues confronting Black/female managers, and two offer guidance to corporate newcomers. (CMG)

  14. SSEL1.0. Sandia Scalable Encryption Software

    SciTech Connect

    Tarman, T.D.

    1996-08-29

    Sandia Scalable Encryption Library (SSEL) Version 1.0 is a library of functions that implement Sandia`s scalable encryption algorithm. This algorithm is used to encrypt Asynchronous Transfer Mode (ATM) data traffic, and is capable of operating on an arbitrary number of bits at a time (which permits scaling via parallel implementations), while being interoperable with differently scaled versions of this algorithm. The routines in this library implement 8 bit and 32 bit versions of a non-linear mixer which is compatible with Sandia`s hardware-based ATM encryptor.

  15. A report on IPv6 deployment activities and issues at Sandia National Laboratories:FY2007.

    SciTech Connect

    Tolendino, Lawrence F.; Eldridge, John M.; Hu, Tan Chang; Maestas, Joseph H.

    2007-06-01

    Internet Protocol version 4 (IPv4) has been a mainstay of the both the Internet and corporate networks for delivering network packets to the desired destination. However, rapid proliferation of network appliances, evolution of corporate networks, and the expanding Internet has begun to stress the limitations of the protocol. Internet Protocol version 6 (IPv6) is the replacement protocol that overcomes the constraints of IPv4. As the emerging Internet network protocol, SNL needs to prepare for its eventual deployment in international, national, customer, and local networks. Additionally, the United States Office of Management and Budget has mandated that IPv6 deployment in government network backbones occurs by 2008. This paper explores the readiness of the Sandia National Laboratories network backbone to support IPv6, the issues that must be addressed before a deployment begins, and recommends the next steps to take to comply with government mandates. The paper describes a joint work effort of the Sandia National Laboratories ASC WAN project team and members of the System Analysis & Trouble Resolution, the Communication & Network Systems, and Network System Design & Implementation Departments.

  16. Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program

    SciTech Connect

    Schriner, H.; Davies, B.; Sniegowski, J.; Rodgers, M.S.; Allen, J.; Shepard, C.

    1998-05-01

    Research and development in the design and manufacture of Microelectromechanical Systems (MEMS) is growing at an enormous rate. Advances in MEMS design tools and fabrication processes at Sandia National Laboratories` Microelectronics Development Laboratory (MDL) have broadened the scope of MEMS applications that can be designed and manufactured for both military and commercial use. As improvements in micromachining fabrication technologies continue to be made, MEMS designs can become more complex, thus opening the door to an even broader set of MEMS applications. In an effort to further research and development in MEMS design, fabrication, and application, Sandia National Laboratories has launched the Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program or SAMPLES program. The SAMPLES program offers potential partners interested in MEMS the opportunity to prototype an idea and produce hardware that can be used to sell a concept. The SAMPLES program provides education and training on Sandia`s design tools, analysis tools and fabrication process. New designers can participate in the SAMPLES program and design MEMS devices using Sandia`s design and analysis tools. As part of the SAMPLES program, participants` designs are fabricated using Sandia`s 4 level polycrystalline silicon surface micromachine technology fabrication process known as SUMMiT (Sandia Ultra-planar, Multi-level MEMS Technology). Furthermore, SAMPLES participants can also opt to obtain state of the art, post-fabrication services provided at Sandia such as release, packaging, reliability characterization, and failure analysis. This paper discusses the components of the SAMPLES program.

  17. Shock compression of glow discharge polymer (GDP): density functional theory (DFT) simulations and experiments on Sandia's Z-machine

    NASA Astrophysics Data System (ADS)

    Cochrane, K. R.; Ao, T.; Hamel, S.; Lemke, R. W.; Schoff, M. E.; Blue, B. E.; Herrmann, M. C.; Mattsson, T. R.

    2015-06-01

    Glow discharge polymer (GDP) is used extensively in inertial confinement fusion (ICF) capsules. Accurate knowledge of the equation of state (EOS) under shock and release is particularly important for high-fidelity design and analysis of ICF experiments since the capsule material is subject to several converging shocks as well as release towards the cryogenic fuel. We performed Density Functional Theory (DFT) based molecular dynamics simulations, to gain knowledge of the behavior of GDP - for example regarding the role of chemical dissociation during shock compression, we find that the dissociation regime along the Hugoniot extends from 50 GPa to 250 GPa. The shock pressures calculated from DFT are compared to experimental data taken on magnetically launched flyer plate impact experiments at Sandia's Z-machine. Large GDP samples were grown in a planar geometry to improve the sample quality and maintained in a nitrogen atmosphere following manufacturing, thus allowing for a direct comparison to the simulations. Sandia National Laboratories is a multi program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's NNSA under Contract DE-AC04-94AL85000

  18. Shock compression of glow discharge polymer (GDP): density functional theory (DFT) simulations and experiments on Sandia's Z-machine

    NASA Astrophysics Data System (ADS)

    Mattsson, Thomas R.; Cochrane, K. R.; Ao, T.; Lemke, R. W.; Flicker, D. G.; Schoff, M. E.; Blue, B. E.; Hamel, S.; Herrmann, M. C.

    2015-11-01

    Glow discharge polymer (GDP) is used extensively as capsule/ablation material in inertial confinement fusion (ICF) capsules. Accurate knowledge of the equation of state (EOS) under shock and release is particularly important for high-fidelity design, analysis, and optimization of ICF experiments since the capsule material is subject to several converging shocks as well as release towards the cryogenic fuel. We performed Density Functional Theory (DFT) based quantum molecular dynamics (QMD) simulations, to gain knowledge of the behavior of GDP - including the effect of changes in chemical composition. The shock pressures calculated from DFT are compared experimental data taken on magnetically launched flyer plate impact experiments on at Sandia's Z-machine. Large GDP samples were grown in a planar geometry to improve the sample quality and maintained in a nitrogen atmosphere following manufacturing, thus allowing for a direct comparison to the DFT/QMD simulations. Sandia National Laboratories is a multi program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's NNSA under contract DE-AC04-94AL85000.

  19. Sandia secure processor : a native Java processor.

    SciTech Connect

    Wickstrom, Gregory Lloyd; Gale, Jason Carl; Ma, Kwok Kee

    2003-08-01

    The Sandia Secure Processor (SSP) is a new native Java processor that has been specifically designed for embedded applications. The SSP's design is a system composed of a core Java processor that directly executes Java bytecodes, on-chip intelligent IO modules, and a suite of software tools for simulation and compiling executable binary files. The SSP is unique in that it provides a way to control real-time IO modules for embedded applications. The system software for the SSP is a 'class loader' that takes Java .class files (created with your favorite Java compiler), links them together, and compiles a binary. The complete SSP system provides very powerful functionality with very light hardware requirements with the potential to be used in a wide variety of small-system embedded applications. This paper gives a detail description of the Sandia Secure Processor and its unique features.

  20. Sandia Cognitive Aide V2.0

    SciTech Connect

    2004-04-15

    The Sandia Cognitive Aide (SCA) collects data from personal computer use and uses this information to make suggestions to the user. It records interactions with MS Outlook, MS Word, MS PowerPoint, and the Internet Explorer, indexing email messages, documents, presentation, and web pages accessed, The user can then query the indexed documents from any Windows application. The system also suggests what it believes to be relevant terms to a given query. The software provides facilities for constructing and submitting queries to WWW search engines. This version of the software also enables the user to define different "task contexts" within the user works. The contexts are defined in terms of related terms. The user can associate documents with these contexts. The contexts can be searched as well as the documents. This software is designed to access and utilize the cognitive model being build by Sandia National Laboratories, org. 15311 and uses the STANLEY text analysis library.

  1. Superconducting technology program Sandia 1996 annual report

    SciTech Connect

    Roth, E.P.

    1997-02-01

    Sandia`s Superconductivity Technology Program is a thallium-based high-temperature superconductor (HTS) research and development program consisting of efforts in powder synthesis and process development, open-system thick film conductor development, wire and tape fabrication, and HTS motor design. The objective of this work is to develop high-temperature superconducting conductors (wire and tape) capable of meeting requirements for high-power electrical devices of interest to industry. The research efforts currently underway are: (1) Process development and characterization of thallium-based high-temperature superconducting closed system wire and tape, (2) Investigation of the synthesis and processing of thallium-based thick films using two-zone processing, and (3) Cryogenic design of a 30K superconducting motor. This report outlines the research that has been performed during FY96 in each of these areas.

  2. Solar activities at Sandia National Laboratories

    NASA Astrophysics Data System (ADS)

    Klimas, Paul C.; Hasti, David E.

    The use of renewable energy technologies is typically thought of as an integral part of creating and sustaining an environment that maximizes the overall quality of life of the Earth's present inhabitants and does not leave an undue burden on future generations. Sandia National Laboratories has been a leader in developing and deploying many of these technologies over the last two decades. A common but special aspect of all of these activities is that they are all conducted in cooperation with various types of partners. Some of these partners have an interest in seeing these systems grow in the marketplace, while others are primarily concerned with economic benefits that can come from immediate use of these renewable energy systems. This paper describes solar thermal and photovoltaic technology activities at Sandia that are intended to accelerate the commercialization of these solar systems.

  3. Sandia National Laboratories Education Outreach Activities

    SciTech Connect

    Dawes, William R. Jr.

    1999-08-26

    The US Department of Energy and its national laboratories are a major employer of scientists and engineers and consequently have a strong interest in the development and training of a qualified pool of employment candidates. For many years the DOE and its national laboratories have supported education activities devoted to increasing the number and quality of science and engineering graduates. This is part of the DOE mission because of the critical national need for scientists and engineers and the recognized deficiencies in the education system for science and mathematics training. Though funding support for such activities has waxed and waned, strong education programs have survived in spite of budget pressures. This paper reviews a few of the education programs presently supported at Sandia by the Science and Technology Outreach Department. The US DOE Defense Programs Office and Sandia National Laboratories provide financial support for these education activities.

  4. Solar activities at Sandia National Laboratories

    SciTech Connect

    Klimas, P.C.; Hasti, D.E.

    1994-03-01

    The use of renewable energy technologies is typically thought of as an integral part of creating and sustaining an environment that maximizes the overall quality of life of the Earth`s present inhabitants and does not leave an undue burden on future generations. Sandia National Laboratories has been a leader in developing and deploying many of these technologies over the last two decades. A common but special aspect of all of these activities is that they are all conducted in cooperation with various types of partners. Some of these partners have an interest in seeing these systems grow in the marketplace, while others are primarily concerned with economic benefits that can come from immediate use of these renewable energy systems. This paper describes solar thermal and photovoltaic technology activities at Sandia that are intended to accelerate the commercialization of these solar systems.

  5. Inverter testing at Sandia National Laboratories

    SciTech Connect

    Ginn, J.W.; Bonn, R.H.; Sittler, G.

    1997-04-01

    Inverters are key building blocks of photovoltaic (PV) systems that produce ac power. The balance of systems (BOS) portion of a PV system can account for up to 50% of the system cost, and its reliable operation is essential for a successful PV system. As part of its BOS program, Sandia National Laboratories (SNL) maintains a laboratory wherein accurate electrical measurements of power systems can be made under a variety of conditions. This paper outlines the work that is done in that laboratory.

  6. Review of flow battery testing at Sandia

    SciTech Connect

    Butler, P.C.; Miller, D.W.; Robinson, C.E.; Rodriguez, G.P.

    1984-01-01

    Sandia National Laboratories is evaluating prototype zinc/bromine, Redox, and zinc/ferricyanide flowing electrolyte batteries and cells. This paper will update previous reports of test results of two Exxon zinc/bromine batteries and one NASA Redox iron/chromium battery. Two 60-sq. cm. zinc/ferricyanide cells from Lockheed Missiles and Space Co. are also being evaluated. Performance, life, and operating data will be described for these batteries and cells.

  7. A reassessment study of multi-material-shell gas puff z-pinches as a pulsed neutron source on the sandia ZR

    NASA Astrophysics Data System (ADS)

    Chong, Y. K.; Velikovich, A. L.; Thornhil, J. W.; Giuliani, J. L.; Knapp, P.; Jennings, C.

    2013-10-01

    Over the last few years, numerous 1D and 2D MHD simulation studies of deuterium (D) based double-shell gas-puff Z-pinch implosions driven by the Sandia ZR accelerator have been carried out to assess the Z-pinch as a pulsed thermal fusion neutron source. In these studies, an ad-hoc time-dependent shunt impedance model was used within the external driving circuit model in order to account for the unresolved current loss in the MITL and the load. In this study, we incorporate an improved ZR circuit model recently formulated based on the recent Sandia argon gas-puff experiment circuit data into the multi-material version of the Mach +DDTCRE RMHD code. We reinvestigate the effects of multidimensional structure and nonuniform gradients as well as the outer- and inner-shell material interaction on the implosion physics and dynamics of both D-on-D and argon-on-D Z-pinch loads using the model. Then, we characterize the neutron production performance of the Z-pinch loads as a function of total mass, mass ratio and/or radius toward their optimization as a pulsed thernonuclear neutron source. Work supported by DOE/NNSA. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. DOE's NNSA under contract DE-AC04-94AL85000.

  8. 25 CFR 213.14 - Corporations and corporate information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Commission, see 17 CFR chapter II. ... 25 Indians 1 2010-04-01 2010-04-01 false Corporations and corporate information. 213.14 Section... Corporations and corporate information. If the applicant for a lease is a corporation, it shall file...

  9. 25 CFR 213.14 - Corporations and corporate information.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Commission, see 17 CFR chapter II. ... 25 Indians 1 2011-04-01 2011-04-01 false Corporations and corporate information. 213.14 Section... Corporations and corporate information. If the applicant for a lease is a corporation, it shall file...

  10. Creating corporate advantage.

    PubMed

    Collis, D J; Montgomery, C A

    1998-01-01

    What differentiates truly great corporate strategies from the merely adequate? How can executives at the corporate level create tangible advantage for their businesses that makes the whole more than the sum of the parts? This article presents a comprehensive framework for value creation in the multibusiness company. It addresses the most fundamental questions of corporate strategy: What businesses should a company be in? How should it coordinate activities across businesses? What role should the corporate office play? How should the corporation measure and control performance? Through detailed case studies of Tyco International, Sharp, the Newell Company, and Saatchi and Saatchi, the authors demonstrate that the answers to all those questions are driven largely by the nature of a company's special resources--its assets, skills, and capabilities. These range along a continuum from the highly specialized at one end to the very general at the other. A corporation's location on the continuum constrains the set of businesses it should compete in and limits its choices about the design of its organization. Applying the framework, the authors point out the common mistakes that result from misaligned corporate strategies. Companies mistakenly enter businesses based on similarities in products rather than the resources that contribute to competitive advantage in each business. Instead of tailoring organizational structures and systems to the needs of a particular strategy, they create plain-vanilla corporate offices and infrastructures. The company examples demonstrate that one size does not fit all. One can find great corporate strategies all along the continuum. PMID:10179655

  11. Corporal Punishment in Tennessee Schools.

    ERIC Educational Resources Information Center

    Kinnard, Karren Q; Rust, James O.

    1981-01-01

    Responses of 101 Tennessee school superintendents indicate: all allow and use corporal punishment; 57 keep records of corporal punishment usage; corporal punishment is considered effective in many cases; the community is seen as supportive of corporal punishment; and the paddle appears to be the most popular method of corporal punishment. (NEC)

  12. Manufacturing Technology: A Sandia Technology Bulletin, Volume 1, No. 1

    NASA Astrophysics Data System (ADS)

    Maydew, R. C.; Leonard, J. A.; Hey, N. S.

    1990-08-01

    Welcome to this first issue of Manufacturing Technology, one of three new technology bulletins published at Sandia National Laboratories in which we seek to share information with U.S. industry about applications of technology. Inside this issue: industry/DOE/Sandia agreement to strengthen specialty metals competitiveness; silicon micromachining produces microscopic parts; Sandia develops state-of-the-art capacitor winding machine; new robotic system spells finis to manual edge finishing; and milling assistant speeds numerically controlled machine programming.

  13. Sandia software guidelines. Volume 3. Standards, practices, and conventions

    SciTech Connect

    Not Available

    1986-07-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies software standards, conventions, and practices. These guidelines are the result of a collective effort within Sandia National Laboratories to define recommended deliverables and to document standards, practices, and conventions which will help ensure quality software. 66 refs., 5 figs., 6 tabs.

  14. Overview of Sandia National Laboratories and Antenna Development Department

    SciTech Connect

    Brock, B.C.

    1994-04-01

    Sandia is a multiprogram R & D laboratory. It has responsibilities in the following areas: (1) defense programs; (2) energy and environment; and (3) work for others (DOD, NSA, etc.). In 1989, the National Competitiveness Technology Transfer Act added another responsibility -- contributions to industrial competitiveness. Sandia has two major laboratory locations, New Mexico and California, and two flight testing locations, Tonopah Test Range, Nevada and Kauai Test Facility, Hawaii. The last part of this talk was dedicated to antenna research at Sandia.

  15. Manufacturing technology: A Sandia Technology Bulletin, Volume 1, No. 1

    SciTech Connect

    Maydew, R.C.; Leonard, J.A.; Hey, N.S.

    1990-08-01

    Welcome to this first issue of Manufacturing Technology, one of three new technology bulletins published at Sandia National Laboratories in which we seek to share information with US industry about applications of technology. Inside this issue: industry/DOE/Sandia agreement to strengthen specialty metals competitiveness; silicon micromachining produces microscopic parts; Sandia develops state-of-the-art capacitor winding machine; new robotic system spells finis to manual edge finishing; and milling assistant speeds numerically controlled machine programming.

  16. Energy Efficient Legged Robotics at Sandia Labs, Part 2

    SciTech Connect

    Buerger, Steve; Mazumdar, Ani; Spencer, Steve

    2015-06-02

    Sandia is developing energy efficient actuation and drive train technologies to dramatically improve the charge life of legged robots. The work is supported by DARPA, and Sandia will demonstrate an energy efficient bipedal robot at the technology exposition section of the DARPA Robotics Challenge Finals in June, 2015. This video, the second in a series, describes the continued development and integration of the Sandia Transmission Efficient Prototype Promoting Research (STEPPR) robot.

  17. Power Supplies for Space Systems Quality Assurance by Sandia Laboratories

    DOE R&D Accomplishments Database

    Hannigan, R. L.; Harnar, R. R.

    1976-07-01

    The Sandia Laboratories` participation in Quality Assurance programs for Radioisotopic Thermoelectric Generators which have been used in space systems over the past 10 years is summarized. Basic elements of this QA program are briefly described and recognition of assistance from other Sandia organizations is included. Descriptions of the various systems for which Sandia has had the QA responsibility are presented, including SNAP 19 (Nimbus, Pioneer, Viking), SNAP 27 (Apollo), Transit, Multi Hundred Watt (LES 8/9 and MJS), and a new program, High Performance Generator Mod 3. The outlook for Sandia participation in RTG programs for the next several years is noted.

  18. A History of Building 828, Sandia National Laboratories

    SciTech Connect

    Ullrich, Rebecca

    1999-08-01

    This report documents the history of Building 828 in Sandia National Laboratories' Technical Area I. Building 828 was constructed in 1946 as a mechanical test laboratory for Los Alamos' Z-Division (later Sandia) as it moved to Sandia Base. The building has undergone significant remodeling over the years and has had a variety of occupants. The building was evaluated in compliance with the National Historic Preservation Act, but was not eligible for the National Register of Historic Places. Nevertheless, for many Labs employees, it was a symbol of Sandia's roots in World War II and the Manhattan Project.

  19. Understanding Corporate Culture.

    ERIC Educational Resources Information Center

    Cluff, Gary A.

    1988-01-01

    Considers concept of corporate culture and discusses several values which can be considered when assessing corporate culture, and the "compatibility scales" used to measure them. Included are discussions of employee attitudes, work atmosphere, internal communications, management style, employment opportunity, stability, business ethics, corporate…

  20. Making the Corporate Connection.

    ERIC Educational Resources Information Center

    Cornforth, Suzanne; Simpson, Kristen

    1999-01-01

    Corporate sponsorship is a marketing strategy by which companies communicate about their products or services by affiliating with events or institutions valued by targeted customer groups. Increasingly, campus communicators are seeking to establish corporate sponsorships but first must resolve legal and ethical concerns. Various types of…

  1. Entering the Corporate Market.

    ERIC Educational Resources Information Center

    Greenshields, Garry W.

    This seminar guide was designed for use with a series of slides in training administrators to market an educational program or service to corporations. The seminar explains the following eight stages in planning entry into the corporate market: identifying appropriate publics; researching the market (analyzing supply and demand, collecting data,…

  2. Corporal Punishment Handbook.

    ERIC Educational Resources Information Center

    Maurer, Adah

    This handbook describes the use of corporal punishment, attitudes towards it, and alternatives to it. Topics covered include: (1) a definition of corporal punishment; (2) descriptions and examples of different types; (3) a brief history of its use in schools and society; (4) arguments in favor of its use; (5) arguments for abolition; (6)…

  3. Corporal Punishment Revisited.

    ERIC Educational Resources Information Center

    Wilson, John

    2002-01-01

    Lists arguments for using corporal punishment in educational institutions and considers some advantages of its use. Asks when it should be used, who should be empowered to administer it, and why there are increasingly strong feelings against corporal punishment in some societies while others continue to use it. (BT)

  4. Sandia National Laboratories Institutional Plan: FY 1996--2001

    SciTech Connect

    1995-12-31

    Sandia`s Institutional Plan is by necessity a large document. As their missions have grown and diversified over the past decades, the variety of technical and site activities has increased. The programs and activities described here cover an enormous breadth of scientific and technological effort--from the creation of new materials to the development of a Sandia-wide electronic communications system. Today, there are three major themes that greatly influence this work. First, every federally funded institution is being challenged to find ways to become more cost effective, as the US seeks to reduce the deficit and achieve a balanced federal spending plan. Sandia is evaluating its business and operational processes to reduce the overall costs. Second, in response to the Galvin Task Force`s report ``Alternative Futures for the Department of Energy National Laboratories``, Sandia and the Department of Energy are working jointly to reduce the burden of administrative and compliance activities in order to devote more of the total effort to their principal research and development missions. Third, they are reevaluating the match between their missions and the programs they will emphasize in the future. They must demonstrate that Sandia`s roles--in national security, energy security, environmental integrity, and national scientific and technology agenda support--fit their special capabilities and skills and thus ensure their place in these missions for the longer planning horizon. The following areas are covered here: Sandia`s mission; laboratory directives; programmatic activities; technology partnerships and commercialization; Sandia`s resources; and protecting resources and the community.

  5. Sandia National Laboratories Technical Library status report

    SciTech Connect

    Kurtz, S.

    1983-01-01

    The Technical Library collection consists of the following types of materials: (1) 45,000 cataloged books, (2) 100,000 cataloged reports originating from Sandia and other private and governmental agencies which grows at the rate of approximately 6000 reports per year, (4) 1500 cataloged periodical subscriptions, (5) A 216,000-item central technical file composed of memos, correspondence, trip reports, minutes of meetings, test reports and similar documents originated by Sandia, which grows at the rate of about 3000 items per year, and (6) A 60,000-item document accountability file which serves to track the movement of classified documents from origination to destruction. Sandia's Technical Library has been automated since the 1960's using an in-house designed system. The automated system provided acquisitions, cataloging, circulation, Boolean searching and SDI services for the books collection using indexed-sequential files and batch updating. Various automated functions were provided for the other types of materials using sequential files with batch updating. In early 1981 the library began the process of acquiring a stand-alone computer. Library software packages were evaluated and DOBIS was selected as the software which was best able to meet our needs. As of January 1983 DOBIS acquisition and circulation functions are being used for the books file, cataloging for new reports was started and manual key-in begun on the borrower (about 7000 records) and funds files. The reports and CTF files on the Univac were written to tape until modifications of the conversion program have been done. Conversion of the periodicals records has been postponed until the periodicals functions release is available. In the meantime, manual records are being kept.

  6. Recycling Resources. [Student Handbook, Sound Filmstrips, 12-Inch Record, Pollution Simulation Game, Teacher's Manual

    ERIC Educational Resources Information Center

    Hatch, C. Richard

    A 15- to 20-hour course on materials recycling, teaching junior high school students about environmental problems and solutions, is developed in this set of materials. It attempts to stimulate them to participate in community efforts aimed at improving the environment. Items in the kit include: (1) teacher's manual, with lesson plans enumerating…

  7. Geothermal instrumentation development activities at Sandia

    SciTech Connect

    Carson, C.C.

    1985-03-01

    A major element of Sandia's Geothermal Technology Development Program is the effort directed toward development of instrumentation. This effort has two aspects, the development of high temperature components and prototype tools and the investigation of new concepts and capabilities. The focus of these activities is the acquisition of information to make geothermal drilling and resource development more efficient. Several projects of varying nature and scope make up the instrumentation development element, and this element will expand as the program emphasis on development of an advanced geothermal drilling system and the need for improved information grow. 13 refs.

  8. Overview of Sandia's electric vehicle battery program

    NASA Astrophysics Data System (ADS)

    Clark, R. P.

    1993-11-01

    Sandia National Laboratories is actively involved in several projects which are part of an overall Electric Vehicle Battery Program. Part of this effort is funded by the United States Department of Energy/Office of Transportation Technologies (DOE/OTT) and the remainder is funded through the United States Advanced Battery Consortium (USABC). DOE/OTT supported activities include research and development of zinc/air and sodium/sulfur battery technologies as well as double layer capacitor (DLC) R&D. Projects in the USABC funded work include lithium/polymer electrolyte (LPE) R&D, sodium/sulfur activities and battery test and evaluation.

  9. Sandia Analyst Aide V0.5

    Energy Science and Technology Software Center (ESTSC)

    2005-05-06

    Allow people to analyze the contents of text document, allowing the user to generate: I. automated reports providing information about various aspects of the document set 2. produce models which can be uploaded into Sandia's cognitive model framework 3. produce visualization of various aspects of the document set, including relationships among key terms 4. compute various topical contexts discovered within the document set 5. start a web spider which can scour the web for moremore » information about the topics found in the document set« less

  10. Sandia Analyst Aide V0.5

    SciTech Connect

    Bauer, Travis; Forsythe, Chris; Apeed, Ann; Apodaca, Vincent; Verzi, Steve; Blackledge, David

    2005-05-06

    Allow people to analyze the contents of text document, allowing the user to generate: I. automated reports providing information about various aspects of the document set 2. produce models which can be uploaded into Sandia's cognitive model framework 3. produce visualization of various aspects of the document set, including relationships among key terms 4. compute various topical contexts discovered within the document set 5. start a web spider which can scour the web for more information about the topics found in the document set

  11. The ATM conversion at Sandia National Laboratories

    SciTech Connect

    Brenkosh, J.P.

    1996-08-01

    Converting a large, heterogeneous, networked, environment to ATM (Asynchronous Transfer Mode) can yield many benefits. Before these benefits can be reaped, however, numerous decisions must be made and implemented. This paper presents a case study which describes the steps that were necessary to convert a backbone network at Sandia National Laboratories in Albuquerque, New Mexico to ATM. It presents each step by explaining its importance and what options were considered along with their tradeoffs. It is hoped that organizations contemplating converting to ATM will have a better understanding of how the transition is implemented after reading this paper.

  12. Sandia Multispectral Airborne Lidar for UAV Deployment

    SciTech Connect

    Daniels, J.W.; Hargis,Jr. P.J.; Henson, T.D.; Jordan, J.D.; Lang, A.R.; Schmitt, R.L.

    1998-10-23

    Sandia National Laboratories has initiated the development of an airborne system for W laser remote sensing measurements. System applications include the detection of effluents associated with the proliferation of weapons of mass destruction and the detection of biological weapon aerosols. This paper discusses the status of the conceptual design development and plans for both the airborne payload (pointing and tracking, laser transmitter, and telescope receiver) and the Altus unmanned aerospace vehicle platform. Hardware design constraints necessary to maintain system weight, power, and volume limitations of the flight platform are identified.

  13. Sandia technology engineering and science accomplishments

    SciTech Connect

    Not Available

    1993-03-01

    Sandia is a DOE multiprogram engineering and science laboratory with major facilities at Albuquerque, New Mexico, and Livermore, California, and a test range near Tonapah, Nevada. We have major research and development responsibilities for nuclear weapons, arms control, energy, the environment, economic competitiveness, and other areas of importance to the needs of the nation. Our principal mission is to support national defense policies by ensuring that the nuclear weapon stockpile meets the highest standards of safety, reliability, security, use control, and military performance. Selected unclassified technical activities and accomplishments are reported here. Topics include advanced manufacturing technologies, intelligent machines, computational simulation, sensors and instrumentation, information management, energy and environment, and weapons technology.

  14. From Catalog to Web: Desktop Access to Sandia Technical Reports.

    ERIC Educational Resources Information Center

    Stoecker, Nora K.; Alford, Dixie L.

    1998-01-01

    Describes the processes developed in the Sandia National Laboratories (a Department of Energy multiprogram national laboratory) Technical Library to provide and improve desktop access to Sandia-generated documents. Discusses procedures for cataloging these electronic reports, including identification of the bibliographic information and MARC tags…

  15. Lessons learned from early microelectronics production at Sandia National Laboratories

    SciTech Connect

    Weaver, H.T.

    1998-02-01

    During the 1980s Sandia designed, developed, fabricated, tested, and delivered hundreds of thousands of radiation hardened Integrated Circuits (IC) for use in weapons and satellites. Initially, Sandia carried out all phases, design through delivery, so that development of next generation ICs and production of current generation circuits were carried out simultaneously. All this changed in the mid-eighties when an outside contractor was brought in to produce ICs that Sandia developed, in effect creating a crisp separation between development and production. This partnership had a severe impact on operations, but its more damaging effect was the degradation of Sandia`s microelectronics capabilities. This report outlines microelectronics development and production in the early eighties and summarizes the impact of changing to a separate contractor for production. This record suggests that low volume production be best accomplished within the development organization.

  16. 1992 DOE/Sandia crystalline photovoltaic technology project review meeting

    SciTech Connect

    Maish, A.

    1992-07-01

    This document serves as the proceedings for the annual project review meeting held by Sandia National Laboratories` Photovoltaic Technology and Photovoltaic Evaluation Departments. It contains information supplied by organizations making presentations at the meeting, which was held July 14--15, 1992 at the Sheraton Old Town Hotel in Albuquerque, New Mexico. Overview sessions covered the Department of Energy (DOE) program, including those at Sandia and the National Renewable Energy Laboratory (NREL), and non-DOE programs, including the EPRI concentrator collector program, The Japanese crystalline silicon program, and some concentrating photovoltaic activities in Europe. Additional sessions included papers on Sandia`s Photovoltaic Device Fabrication Laboratory`s collaborative research, cell processing research, the activities of the participants in the Concentrator Initiative Program, and photovoltaic technology evaluation at Sandia and NREL.

  17. Energy technologies at Sandia National Laboratories: Past, Present, Future

    SciTech Connect

    Not Available

    1989-08-01

    We at Sandia first became involved with developing energy technology when the nation initiated its push toward energy independence in the early 1970s. That involvement continues to be strong. In shaping Sandia's energy programs for the 1990s, we will build on our track record from the 70s and 80s, a record outlined in this publication. It contains reprints of three issues of Sandia's Lab News that were devoted to our non-nuclear energy programs. Together, they summarize the history, current activities, and future of Sandia's diverse energy concerns; hence my desire to see them in one volume. Written in the fall of 1988, the articles cover Sandia's extremely broad range of energy technologies -- coal, oil and gas, geothermal, solar thermal, photovoltaics, wind, rechargeable batteries, and combustion.

  18. Sandia technology: Engineering and science applications

    NASA Astrophysics Data System (ADS)

    Maydew, M. C.; Parrot, H.; Dale, B. C.; Floyd, H. L.; Leonard, J. A.; Parrot, L.

    1990-12-01

    This report discusses: protecting environment, safety, and health; Sandia's quality initiative; Sandia vigorously pursues technology transfer; scientific and technical education support programs; nuclear weapons development; recognizing battlefield targets with trained artificial neural networks; battlefield robotics: warfare at a distance; a spinning shell sizes up the enemy; thwarting would-be nuclear terrorists; unattended video surveillance system for nuclear facilities; making the skies safer for travelers; onboard instrumentation system to evaluate performance of stockpile bombs; keeping track with lasers; extended-life lithium batteries; a remote digital video link acquires images securely; guiding high-performance missiles with laser gyroscopes; nonvolatile memory chips for space applications; initiating weapon explosives with lasers; next-generation optoelectronics and microelectronics technology developments; chemometrics: new methods for improving chemical analysis; research team focuses ion beam to record-breaking intensities; standardizing the volt to quantum accuracy; new techniques improve robotic software development productivity; a practical laser plasma source for generating soft x-rays; exploring metal grain boundaries; massively parallel computing; modeling the amount of desiccant needed for moisture control; attacking pollution with sunshine; designing fuel-conversion catalysts with computers; extending a nuclear power plant's useful life; plasma-facing components for the International Thermonuclear Experimental Reactor.

  19. Superconducting Technology Program Sandia 1994 Annual Report

    SciTech Connect

    Roth, E.P.

    1995-10-01

    Sandia`s STP program is a four-part high-temperature superconductor (HTS) research and development program consisting of efforts in powder synthesis and process development, thallium-based HTS film development, wire and tape fabrication, and HTS motor design. The objective of this work is to develop high-temperature superconducting conductors (wire and tape) capable of meeting requirements for high-power electrical devices of interest to industry. The four research efforts currently underway are: (1) Process research on the material synthesis of high-temperature superconductors, (2) Investigation of the synthesis and processing of thallium-based high-temperature superconducting thick films, (3) Process development and characterization of high-temperature superconducting wire and tape, and (4) Cryogenic design of a high-temperature superconducting motor. This report outlines the research that has been performed during FY94 in each of these four areas. Major areas of research are described, although no attempt has been made to exhaustively include all work performed in each of these areas.

  20. Sandia combustion research program: Annual report, 1987

    SciTech Connect

    Palmer, R.E.; Sanders, B.R.; Ivanetich, C.A.

    1988-01-01

    More than a decade ago, in response to a national energy crisis, Sandia proposed to the US Department of Energy a new, ambitious program in combustion research. Our strategy was to apply the rapidly increasing capabilities in lasers and computers to combustion science and technology. Shortly thereafter, the Combustion Research Facility (CRF) was established at Sandia's Livermore location. Designated a ''User Facility,'' the charter of the CRF was to develop and maintain special-purpose resources to support a nationwide initiative--involving US universities, industry, and national laboratories--to improve our understanding and control of combustion. This report includes descriptions of several research projects which have been stimulated by Working Groups and involve the on-site participation of industry scientists. DOE's Industry Technology Fellowship Program has been instrumental in the success of some of the joint efforts. The remainder of this report presents research results of calendar year 1987, separated thematically into nine categories. Refereed journal articles appearing in print during 1987, along with selected other publications, are included at the end of Section 10. In addition to our ''traditional'' research--chemistry, reacting flow, diagnostics, engine combustion, and coal combustion--you will note continued progress in somewhat recent themes: pulse combustion, high temperature materials, and energetic materials, for example. Moreover, we have just started a small, new effort to understand combustion-related issues in the management of toxic and hazardous materials.

  1. Sandia Cognitive Aide V2.0

    Energy Science and Technology Software Center (ESTSC)

    2004-04-15

    The Sandia Cognitive Aide (SCA) collects data from personal computer use and uses this information to make suggestions to the user. It records interactions with MS Outlook, MS Word, MS PowerPoint, and the Internet Explorer, indexing email messages, documents, presentation, and web pages accessed, The user can then query the indexed documents from any Windows application. The system also suggests what it believes to be relevant terms to a given query. The software provides facilitiesmore » for constructing and submitting queries to WWW search engines. This version of the software also enables the user to define different "task contexts" within the user works. The contexts are defined in terms of related terms. The user can associate documents with these contexts. The contexts can be searched as well as the documents. This software is designed to access and utilize the cognitive model being build by Sandia National Laboratories, org. 15311 and uses the STANLEY text analysis library.« less

  2. Superconducting Technology Program: Sandia 1993 annual report

    SciTech Connect

    Roth, E.P.

    1994-05-01

    Sandia`s STP program is a four-part high-temperature superconductor (HTS) research and development program consisting of efforts in powder synthesis and process development, thallium-based HTS film development, wire and tape fabrication, and HTS motor design. The objective of this work is to develop high-temperature superconducting conductors (wire and tape) capable of meeting requirements for high-power electrical devices of interest to industry. The four research efforts currently underway are: (1) process research on the material synthesis of high-temperature superconductors; (2) investigation of the synthesis and processing of thallium-based high-temperature superconducting thick films; (3) process development and characterization of high-temperature superconducting wire and tape, and (4) cryogenic design of a high-temperature superconducting motor. This report outlines the research that has been performed during FY93 in each of these four areas. A brief background of each project is included to provide historical context and perspective. Major areas of research are described, although no attempt has been made to exhaustively include all work performed in each of these areas.

  3. Transient dynamics capability at Sandia National Laboratories

    NASA Technical Reports Server (NTRS)

    Attaway, Steven W.; Biffle, Johnny H.; Sjaardema, G. D.; Heinstein, M. W.; Schoof, L. A.

    1993-01-01

    A brief overview of the transient dynamics capabilities at Sandia National Laboratories, with an emphasis on recent new developments and current research is presented. In addition, the Sandia National Laboratories (SNL) Engineering Analysis Code Access System (SEACAS), which is a collection of structural and thermal codes and utilities used by analysts at SNL, is described. The SEACAS system includes pre- and post-processing codes, analysis codes, database translation codes, support libraries, Unix shell scripts for execution, and an installation system. SEACAS is used at SNL on a daily basis as a production, research, and development system for the engineering analysts and code developers. Over the past year, approximately 190 days of CPU time were used by SEACAS codes on jobs running from a few seconds up to two and one-half days of CPU time. SEACAS is running on several different systems at SNL including Cray Unicos, Hewlett Packard PH-UX, Digital Equipment Ultrix, and Sun SunOS. An overview of SEACAS, including a short description of the codes in the system, are presented. Abstracts and references for the codes are listed at the end of the report.

  4. Instrumentation and telemetry at Sandia National Laboratories.

    SciTech Connect

    Not Available

    1992-01-01

    Sandia National Laboratories (SNL) is a Department of Energy multiprogram engineering and scientific facility with unique design, development, and test capabilities arising from their work in nuclear weapons, energy resources, defense systems, nuclear safeguards, and specialized scientific endeavors. To support these programs, they have developed instrumentation and telemetry expertise not available elsewhere. This technology is applicable to projects in government and industry. Since the 1950s, they have applied our technical competence to meet difficult challenges with innovative solutions to data acquisition and telemetry problems. Sandia - with experience in fields as diverse as parachute design and plasma physics, geology and rocket guidance, human factors and high-speed aerodynamics, non-destructive testing and satellite communications - can use the power of synergism among our many disciplines to solve your complex problems of data and acquisition and analysis. SNL solves difficult data acquisition problems for extreme environments with expertise in advanced telemetry techniques, high data rate telemetry design, specialized electronics packaging, MIL-STD-1553 communications, instrumentation development, real-time data analysis, project management, specialized testers and data encryption.

  5. Sandia`s network for Supercomputing `94: Linking the Los Alamos, Lawrence Livermore, and Sandia National Laboratories using switched multimegabit data service

    SciTech Connect

    Vahle, M.O.; Gossage, S.A.; Brenkosh, J.P.

    1995-01-01

    Supercomputing `94, a high-performance computing and communications conference, was held November 14th through 18th, 1994 in Washington DC. For the past four years, Sandia National Laboratories has used this conference to showcase and focus its communications and networking endeavors. At the 1994 conference, Sandia built a Switched Multimegabit Data Service (SMDS) network running at 44.736 megabits per second linking its private SMDS network between its facilities in Albuquerque, New Mexico and Livermore, California to the convention center in Washington, D.C. For the show, the network was also extended from Sandia, New Mexico to Los Alamos National Laboratory and from Sandia, California to Lawrence Livermore National Laboratory. This paper documents and describes this network and how it was used at the conference.

  6. Corporate Teaching Help Drops.

    ERIC Educational Resources Information Center

    Sanger, David E.

    1985-01-01

    Electronics, pharmaceuticals, and other industry programs to loan corporate employees to colleges and universities for short-term teaching assignments are discussed, including the advantages to both industry and the institutions and the conflicts in demand for specialists. (MSE)

  7. The economic impact of Sandia National Laboratories on central New Mexico and the state of New Mexico fiscal year 1997

    SciTech Connect

    Lansford, R.R.; Nielsen, T.G.; Schultz, J.; Adcock, L.D.; Gentry, L.M.; Ben-David, S.; Temple, J.

    1998-05-29

    Sandia National Laboratories (SNL) was established in 1949 to perform the engineering development and ordnance responsibilities associated with nuclear weapons. By the early 1960`s the facility had evolved into an engineering research and development laboratory and became a multiprogram laboratory during the 1970s. Sandia is operated for the US Department of Energy by the Sandia Corporation, a wholly-owned subsidiary of Lockheed Martin, Incorporated. For several years, the US Department of Energy (DOE) Albuquerque Operations Office (AL) and New Mexico State University (NMSU) have maintained an inter-industry, input-output model with capabilities to assess the impacts of developments initiated outside the economy such as federal DOE monies that flow into the state, on an economy. This model will be used to assess economic, personal income and employment impacts of SNL on central New Mexico and the state of New Mexico. For this report, the reference period is FY 1997 (October 1, 1996, through September 30, 1997) and includes two major impact analyses: the impact of SNL activities on central New Mexico and the economic impacts of SNL on the state of New Mexico. For purposes of this report, the central New Mexico region includes Bernalillo, Sandoval, Valencia, and Torrance counties. Total impact represents both direct and indirect respending by business, including induced effects (respending by households). The standard multipliers used in determining impacts results from the inter-industry, input-output models developed for the four-county region and the state of New Mexico. 6 figs., 10 tabs.

  8. Sandia National Laboratories/New Mexico Facilities and Safety Information Document [NOTE: Volume I, Chapters 2 through 5

    SciTech Connect

    March, F.; Guerrero, J.V.; Johns, W.H.; Schetnan, R.; Bayliss, L.S.; Kuzio, K.A.; White, B.B.

    1999-09-01

    The Facilities Business Unit, which includes the Operations and Engineering Center (7800) and the Facilities Management Center (7900), coordinates decisions about the management of facilities, infrastructure, and sites. These decisions include the following: New construction, including siting; Rehabilitation, and renovation; Relocation; Mothballing; Decontamination and decommissioning; and Demolition. Decisions on these matters flow from a corporate decision process in which SNL directors and vice presidents identify the facility and infrastructure requirements for carrying out work for DOE and other customers. DOE and any non-DOE owners of real estate that is leased or permitted to DOE for SNL/NM use must concur with this identification of requirements. Decision-making follows procedures required by DOE and requirements defined by SNL/NM program executives. See Sandia National Laboratories (1997e), Part II, ''Desired Future State and Strategy,'' and appendices to Sandia National Laboratories (1997e) for more information about planning and decision processes. Decisions on siting take surrounding land uses into account and draw on environmental baseline information maintained at SNL/NM. For environmental baseline and land use information, see Sandia National Laboratories (1999).

  9. [Anorexia and corporal mediations].

    PubMed

    Bureau, Hélène; Moro, Marie Rose

    2013-01-01

    The body, the central point of expression of the anorexic symptom, is an important therapeutic lever.The young anorexic girl protects herself through corporal hypertonicity. This tension is consistent with her fears of seeing her body becoming that of an adult and to feel emotions and sensations with too much force. Corporal mediation consists in helping the young girls get to grips with this body. PMID:23923454

  10. Micromachined sensor and actuator research at Sandia`s Microelectronics Development Laboratory

    SciTech Connect

    Smith, J.H.

    1996-11-01

    An overview of the surface micromachining program at the Microelectronics Development Laboratory of Sandia National Laboratories is presented. Development efforts are underway for a variety of surface micromachined sensors and actuators for both defense and commercial applications. A technology that embeds micromechanical devices below the surface of the wafer prior to microelectronics fabrication has been developed for integrating microelectronics with surface-micromachined micromechanical devices. The application of chemical-mechanical polishing to increase the manufacturability of micromechanical devices is also presented.

  11. Development of explosive event scale model testing capability at Sandia`s large scale centrifuge facility

    SciTech Connect

    Blanchat, T.K.; Davie, N.T.; Calderone, J.J.

    1998-02-01

    Geotechnical structures such as underground bunkers, tunnels, and building foundations are subjected to stress fields produced by the gravity load on the structure and/or any overlying strata. These stress fields may be reproduced on a scaled model of the structure by proportionally increasing the gravity field through the use of a centrifuge. This technology can then be used to assess the vulnerability of various geotechnical structures to explosive loading. Applications of this technology include assessing the effectiveness of earth penetrating weapons, evaluating the vulnerability of various structures, counter-terrorism, and model validation. This document describes the development of expertise in scale model explosive testing on geotechnical structures using Sandia`s large scale centrifuge facility. This study focused on buried structures such as hardened storage bunkers or tunnels. Data from this study was used to evaluate the predictive capabilities of existing hydrocodes and structural dynamics codes developed at Sandia National Laboratories (such as Pronto/SPH, Pronto/CTH, and ALEGRA). 7 refs., 50 figs., 8 tabs.

  12. Massively Parallel Computing: A Sandia Perspective

    SciTech Connect

    Dosanjh, Sudip S.; Greenberg, David S.; Hendrickson, Bruce; Heroux, Michael A.; Plimpton, Steve J.; Tomkins, James L.; Womble, David E.

    1999-05-06

    The computing power available to scientists and engineers has increased dramatically in the past decade, due in part to progress in making massively parallel computing practical and available. The expectation for these machines has been great. The reality is that progress has been slower than expected. Nevertheless, massively parallel computing is beginning to realize its potential for enabling significant break-throughs in science and engineering. This paper provides a perspective on the state of the field, colored by the authors' experiences using large scale parallel machines at Sandia National Laboratories. We address trends in hardware, system software and algorithms, and we also offer our view of the forces shaping the parallel computing industry.

  13. Sandia Data Archive (SDA) file specifications.

    SciTech Connect

    Dolan, Daniel H.,; Ao, Tommy

    2015-02-01

    The Sandia Data Archive (SDA) format is a specific implementation of the HDF5 (Hierarchal Data Format version 5) standard. The format was developed for storing data in a universally accessible manner. SDA files may contain one or more data records, each associated with a distinct text label. Primitive records provide basic data storage, while compound records support more elaborate grouping. External records allow text/binary files to be carried inside an archive and later recovered. This report documents version 1.0 of the SDA standard. The information provided here is sufficient for reading from and writing to an archive. Although the format was original designed for use in MATLAB, broader use is encouraged.

  14. Downhole steam generator subject of Sandia tests

    SciTech Connect

    Not Available

    1981-05-01

    The first field test of a down-hole steam generator developed to inject hot steam directly into deeply buried heavy oil reservoirs began in mid-April near Long Beach, CA. The 23-ft-long, 6-in.-diameter generator, developed by Sandia National Laboratories, will produce up to 800 cu ft of 500 F steam a minute (1.2 MW thermal) at the bottom of a 2500-ft well. Goals of the test are to demonstrate the feasibility of operating the generator at realistic depths and to determine its overall performance and environmental impact. Development of the generator is part of the US Department of Energy's Project Deep Steam to identify techniques for recovering heavy oil from deeply buried (greater than 2500 ft) reservoirs.

  15. Sandia Explosive Inventory and Information System

    SciTech Connect

    Clements, D.A.

    1994-08-01

    The Explosive Inventory and Information System (EIS) is being developed and implemented by Sandia National Laboratories (SNL) to incorporate a cradle to grave structure for all explosives and explosive containing devices and assemblies at SNL from acquisition through use, storage, reapplication, transfer or disposal. The system does more than track all material inventories. It provides information on material composition, characteristics, shipping requirements; life cycle cost information, plan of use; and duration of ownership. The system also provides for following the processes of explosive development; storage review; justification for retention; Resource, Recovery and Disposition Account (RRDA); disassembly and assembly; and job description, hazard analysis and training requirements for all locations and employees involved with explosive operations. In addition, other information systems will be provided through the system such as the Department of Energy (DOE) and SNL Explosive Safety manuals, the Navy`s Department of Defense (DoD) Explosive information system, and the Lawrence Livermore National Laboratories (LLNL) Handbook of Explosives.

  16. Testing technology. A Sandia Technology Bulletin

    SciTech Connect

    Goetsch, B.; Floyd, H.L.; Doran, L.

    1994-02-01

    This Sandia publication seeks to facilitate technology exchange with industries, universities, and government agencies. It presents brief highlights of four projects. First is a project to simulate the use of airbags to soften the landing of a probe on Mars. Second is the use of a computer simulation system to facilitate the testing of designs for different experiments, both for experimental layout and results analysis. Third is the development of a system for in-house testing of batteries and capacitive energy storage systems, for deployment at the manufacturing sites, as opposed to final use areas. Finally is information on a noncontact measurement system which can be used to determine axes on objects of different shapes, with high precision.

  17. Pyrotechnic component development at Sandia National Laboratory

    SciTech Connect

    Wilcox, P.D.

    1987-01-01

    Pyrotechnic and explosive devices are designed at Sandia National Laboratories, SNL, which must satisfy high reliability requirements for reliable function and storage life. Since only a small number of devices may be built, high standards of quality of both the explosive and structural materials are necessary. We have developed special alloys and glass-ceramic seals for headers and structural parts of these devices to satisfy requirements for minimum size and weight but with increased ruggedness and safety. Hermetic sealing is used extensively to aid in the control of corrosion and aging effects. There is an increasing demand for the integration of these devices with safer (less sensitive) materials, better handling methods, and the use of electrical or fiber optic logic input elements. This paper addresses the trends in active materials, structural materials and a new method of ignition which enhances device designs compatible with low voltage and digital electronics.

  18. Current radar-responsive tag development activities at Sandia National Laboratories

    NASA Astrophysics Data System (ADS)

    Ormesher, Richard C.; Plummer, Kenneth W.; Wells, Lars M.

    2004-08-01

    and Combat ID application. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company for the United States Departments of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  19. Space robotics programs at Sandia National Laboratories

    SciTech Connect

    Klarer, P.

    1993-01-01

    Existing robotic rover and space satellite technologies at Sandia National Laboratories (SNL), coupled with existing launch vehicles and converted military Multiple Independent Reentry Vehicle (MIRV) technologies, can be applied towards the realization of a robotic lunar rover mission in the near term. SNL's Advanced Vehicle Development Department has been designing, producing, and operating prototype rover systems at the Robotic Vehicle Range facility since 1984, and has extensive experience with teleoperated and semiautonomous mobile robotic systems. SNL's Space Systems Directorate has been designing, producing, and operating satellite systems and subsystems in earth orbit for national security missions since the early 1960's. The facilities and robotic vehicle fleet at SNL's Robotic Vehicle Range (SNL-RVR) have been used to support technology base development in applications ranging from DoD battlefield and security missions, to multi-agency nuclear emergency response team exercises and the development of a prototype robotic rover for planetary exploration. Recent activities at the SNL-RVR include the Robotic All Terrain Lunar Exploration Rover (RATLER) prototype development program, exploratory studies on a Near Term Lunar Return Mission scenario for small robotic rovers based on existing space hardware technology, and demonstrations of the utility of existing rover technologies for performing remote field geology tasks similar to those envisioned on a robotic lunar rover mission. Specific technologies demonstrated include low data rate teleoperation, multi-vehicle control, remote site and sample inspection, and standard bandwidth stereo vision. The paper describes Sandia National Laboratories' activities in the Space Robotics area, and highlights the laboratory's supporting technical capabilities.

  20. Space robotics programs at Sandia National Laboratories

    SciTech Connect

    Klarer, P.

    1993-01-01

    Existing robotic rover and space satellite technologies at Sandia National Laboratories (SNL), coupled with existing launch vehicles and converted military Multiple Independent Reentry Vehicle (MIRV) technologies, can be applied towards the realization of a robotic lunar rover mission in the near term. SNL`s Advanced Vehicle Development Department has been designing, producing, and operating prototype rover systems at the Robotic Vehicle Range facility since 1984, and has extensive experience with teleoperated and semiautonomous mobile robotic systems. SNL`s Space Systems Directorate has been designing, producing, and operating satellite systems and subsystems in earth orbit for national security missions since the early 1960`s. The facilities and robotic vehicle fleet at SNL`s Robotic Vehicle Range (SNL-RVR) have been used to support technology base development in applications ranging from DoD battlefield and security missions, to multi-agency nuclear emergency response team exercises and the development of a prototype robotic rover for planetary exploration. Recent activities at the SNL-RVR include the Robotic All Terrain Lunar Exploration Rover (RATLER) prototype development program, exploratory studies on a Near Term Lunar Return Mission scenario for small robotic rovers based on existing space hardware technology, and demonstrations of the utility of existing rover technologies for performing remote field geology tasks similar to those envisioned on a robotic lunar rover mission. Specific technologies demonstrated include low data rate teleoperation, multi-vehicle control, remote site and sample inspection, and standard bandwidth stereo vision. The paper describes Sandia National Laboratories` activities in the Space Robotics area, and highlights the laboratory`s supporting technical capabilities.

  1. Market Assessment and Commercialization Strategy for the Radial Sandia Cooler

    SciTech Connect

    Goetzler, William; Shandross, Richard; Weintraub, Daniel; Young, Jim

    2014-02-01

    This market assessment and commercialization report characterizes and assesses the market potential of the rotating heat exchanger technology developed at Sandia National Laboratories (SNL), known as the Radial Sandia Cooler. The RSC is a novel, motor-driven, rotating, finned heat exchanger technology. The RSC was evaluated for the residential, commercial, industrial, and transportation markets. Recommendations for commercialization were made based on assessments of the prototype RSC and the Sandia Cooler technology in general, as well as an in-depth analysis of the six most promising products for initial RSC commercialization.

  2. 1987 environmental monitoring report, Sandia National Laboratories, Livermore, California

    SciTech Connect

    Devlin, T.K.

    1988-04-01

    Sandia National Labortories conduct various research activities related to Department of Energy interests which have the potential for release of hazardous materials or radionuclides to the environment. A strict environmental control program places maximum emphasis on limiting releases. The environmental monitoring program conducted by Lawrence Livermore National Laboratory and augmented by Sandia is designed to measure the performance of the environmental controls. The program includes analysis of air, water, soil, vegetation, sewer effluent, ground water, and foodstuffs for various toxic, hazardous, or radioactive materials. Based on these studies, the releases of materials of concern at Sandia during 1987 were well below applicable Department of Energy standards. 8 refs., 3 figs., 12 tabs.

  3. Vibration control for precision manufacturing at Sandia National Laboratories

    NASA Astrophysics Data System (ADS)

    Hinnerichs, Terry; Martinez, David

    Sandia National Laboratories performs R&D in structural dynamics and vibration suppression for precision applications in weapon systems, space, underwater, transportation and civil structures. Over the last decade these efforts have expanded into the areas of active vibration control and 'smart' structures and material systems. In addition, Sandia has focused major resources towards technology to support weapon product development and agile manufacturing capability for defense and industrial applications. This paper will briefly describe the structural dynamics modeling and verification process currently in place at Sandia that supports vibration control and some specific applications of these techniques to manufacturing in the areas of lithography, machine tools and flexible robotics.

  4. Vibration control for precision manufacturing at Sandia National Laboratories

    SciTech Connect

    Hinnerichs, T.; Martinez, D.

    1995-04-01

    Sandia National Laboratories performs R and D in structural dynamics and vibration suppression for precision applications in weapon systems, space, underwater, transportation and civil structures. Over the last decade these efforts have expanded into the areas of active vibration control and ``smart`` structures and material systems. In addition, Sandia has focused major resources towards technology to support weapon product development and agile manufacturing capability for defense and industrial applications. This paper will briefly describe the structural dynamics modeling and verification process currently in place at Sandia that supports vibration control and some specific applications of these techniques to manufacturing in the areas of lithography, machine tools and flexible robotics.

  5. Programmable SAW development :Sandia/NASA project final report.

    SciTech Connect

    Brocato, Robert Wesley

    2004-10-01

    This report describes a project to develop both fixed and programmable surface acoustic wave (SAW) correlators for use in a low power space communication network. This work was funded by NASA at Sandia National Laboratories for fiscal years 2004, 2003, and the final part of 2002. The role of Sandia was to develop the SAW correlator component, although additional work pertaining to use of the component in a system and system optimization was also done at Sandia. The potential of SAW correlator-based communication systems, the design and fabrication of SAW correlators, and general system utilization of those correlators are discussed here.

  6. SPICE-SANDIA.LIB. Library Analog Semiconductor Devices SPICE Simulators

    SciTech Connect

    Deveney, M.F.; Archer, W.; Bogdan, C.

    1996-06-06

    SPICE-SANDIA.LIB is a library of parameter sets and macromodels of semiconductor devices. They are used with Spice-based (SPICE is a program for electronic circuit analysis) simulators to simulate electronic circuits.

  7. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - GEOCHEMISTRY LABORATORY AT SANDIA NATIONAL LABORATORIES

    EPA Science Inventory

    These reports summarize pollution prevention opportunity assessments conducted jointly by EPA and DOE at the Geochemistry Laboratory and the Manufacturing and Fabrication Repair Laboratory at the Department of Energy's Sandia National Laboratories facility in Albuquerque, New Mex...

  8. DEMONSTRATION BULLETIN: IN SITU ELECTROKINETIC EXTRACTION SYSTEM - SANDIA NATIONAL LABORATORIES

    EPA Science Inventory

    Sandia National Laboratories (SNL) has developed an in situ soil remediation system that uses electrokinetic principles to remediate hexavalent chromium-contaminated unsaturated or partially saturated soils. The technology involves the in situ application of direct current to the...

  9. SAMPLE (Sandia Agile MEMS Prototyping, Layout tools, and Education)

    SciTech Connect

    Davies, B.R.; Barron, C.C.; Sniegowski, J.J.; Rodgers, M.S.

    1997-08-01

    The SAMPLE (Sandia Agile MEMS Protyping, Layout tools, and Education) service makes Sandia`s state-of-the-art surface-micromachining fabrication process, known as SUMMiT, available to US industry for the first time. The service provides a short cause and customized computer-aided design (CAD) tools to assist customers in designing micromachine prototypes to be fabricated in SUMMiT. Frequent small-scale manufacturing runs then provide SAMPLE designers with hundreds of sophisticated MEMS (MicroElectroMechanical Systems) chips. SUMMiT (Sandia Ultra-planar, Multi-level MEMS Technology) offers unique surface-micromachining capabilities, including four levels of polycrystalline silicon (including the ground layer), flanged hubs, substrate contacts, one-micron design rules, and chemical-mechanical polishing (CMP) planarization. This paper describes the SUMMiT process, design tools, and other information relevant to the SAMPLE service and SUMMiT process.

  10. Cold War Context Statement: Sandia National Laboratories, California Site

    SciTech Connect

    ULLRICH, REBECCA A.

    2003-01-01

    This document was prepared to support the Department of Energy's compliance with Sections 106 and 110 of the National Historic Preservation Act. It provides an overview of the historic context in which Sandia National Laboratories/California was created and developed. Establishing such a context allows for a reasonable and reasoned historical assessment of Sandia National Laboratories/California properties. The Cold War arms race provides the primary historical context for the SNL/CA built environment.

  11. Partnering with Sandia National Laboratories through alliances or consortia

    SciTech Connect

    Winchell, B.M.

    1994-12-01

    To better facilitate working with industry, groups of industrial participants, and partners in alliances or consortia, Sandia National Laboratories presents information helpful to those outside groups as to the forms of arrangements that may be used to better facilitate partnering relationships between Sandia National Laboratories and consortia or alliances of outside parties. It is expected that these alliances and consortia will include both large and small for-profit industrial concerns, as well as not-for-profit entities such as universities, institutes, other research facilities, and other nonprofit institutions or consortia containing institutions. The intent of this report is to provide such outside groups with information that will facilitate rapid interactions with Sandia National Laboratories through some of these forms of business which will be discussed in this report. These are not the only approaches to facilitating business interactions with Sandia National Laboratories and it is not intended that this report be legal advice or required approaches to doing business with Sandia National Laboratories. The intent of this report is merely to suggest ways in which Sandia National Laboratories can work with outside parties in the most expeditious manner.

  12. Partnering with Sandia National Laboratories through alliances or consortia

    SciTech Connect

    Winchell, B.M.

    1994-04-01

    To better facilitate working with industry, groups of industrial participants, and partners in alliances or consortia, Sandia National laboratories presents information helpful to those outside groups as to the forms of arrangements that may be used to better facilitate partnering relationships between Sandia National Laboratories and consortia or alliances of outside parties. It is expected that these alliances and consortia will include both large and small for-profit industrial concerns, as well as not-for-profit entities such as universities, institutes, other research facilities, and other nonprofit institutions or consortia containing institutions. The intent of this report is to provide such outside groups with information that will facilitate rapid interactions with Sandia National Laboratories through some of these forms of business which will be discussed in this report. These are not the only approaches to facilitating business interactions with Sandia National Laboratories and it is not intended that this report be legal advice or required approaches to doing business with Sandia National Laboratories. The intent of this report is merely to suggest ways in which Sandia National Laboratories can work with outside parties in the most expeditious manner.

  13. Sandia National Laboratories Institutional Plan: FY 1999-2004

    SciTech Connect

    Garber, D.P.

    1999-01-06

    This Institutional Plan is the most comprehensive yearly "snapshot" available of Sandia National Laboratories' major programs, facilities, human resources, and budget. The document also includes overviews of our missions, organization, capabilities, planning functions, milestones, and accomplishments. The document's purpose is to provide the above information to the US Department of Energy, key congressional committees, Sandia management, and other present and potential customers. Chapter 2 presents information about Sandia's mission and summarizes our recent revision of Sandia's Strategic Plan. Chapter 3 presents an overview of Sandia's strategic objectives, chapter 4 lists laboratory goals and milestones for FY 1999, and chapter 5 presents our accomplishments during FY 1998. Chapters 3 through 5 are organized around our eight strategic objectives. The four primary objectives cover nuclear weapons responsibilities, nonproliferation and materials control, energy and critical infrastructures, and emerging national security threats. The major programmatic initiatives are presented in chapter 7. However, the programmatic descriptions in chapter 6 and the Associated funding tables in chapter 9 continue to be presented by DOE Budget and Reporting Code, as in previous Sandia institutional plans. As an aid to the reader, the four primary strategic objectives in chapter 3 are cross-referenced to the program information in chapter 6.

  14. 25 CFR 226.8 - Corporation and corporate information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Corporation and corporate information. 226.8 Section 226.8 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS FOR OIL AND GAS MINING Leasing Procedure, Rental and Royalty § 226.8 Corporation...

  15. 25 CFR 226.8 - Corporation and corporate information.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Corporation and corporate information. 226.8 Section 226.8 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS FOR OIL AND GAS MINING Leasing Procedure, Rental and Royalty § 226.8 Corporation...

  16. 25 CFR 226.8 - Corporation and corporate information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Corporation and corporate information. 226.8 Section 226.8 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS FOR OIL AND GAS MINING Leasing Procedure, Rental and Royalty § 226.8 Corporation...

  17. 25 CFR 226.8 - Corporation and corporate information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Corporation and corporate information. 226.8 Section 226.8 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS FOR OIL AND GAS MINING Leasing Procedure, Rental and Royalty § 226.8 Corporation...

  18. Of Corporate Bondage

    ERIC Educational Resources Information Center

    Ridgeway, James

    1975-01-01

    "While it is entirely possible that the university will continue to function as an essential arm of the giant agribusiness and energy corporations, there are, nevertheless, a wealth of opportunities for it to direct its energies to more useful purposes." The author traces universities' past involvement noting alternatives in energy and agriculture…

  19. Corporate information management guidance

    SciTech Connect

    1997-08-01

    At the request of the Department of Energy`s (DOE) Information Management (IM) Council, IM representatives from nearly all Headquarters (HQ) organizations have been meeting over the past year as the Corporate Guidance Group (CGG) to develop useful and sound corporate information management (IM) guidance. The ability of the Department`s IM community to develop such unified guidance continues to be critical to the success of future Departmental IM planning processes and the establishment of a well-coordinated IM environment between Headquarters and field organizations. This report, with 26 specific corporate IM guidance items documented and unanimously agreed to, as well as 12 items recommended for further development and 3 items deferred for future consideration, represents a highly successful effort by the IM community. The effort has proven that the diverse DOE organizations can put aside individual preferences and work together towards a common and mutually beneficial goal. In examining most areas and issues associated with information management in the Department, they have developed specific, far-reaching, and useful guidance. The IM representatives recommend that the documented guidance items provided in this report and approved by the DOE IM Council be followed by all IM organizations. The representatives also strongly recommend that the guidance process developed by the CGG be the single process for developing corporate IM guidance.

  20. The corporate trustee evolution

    SciTech Connect

    Joiner, B.A.; Ross, M.D.

    1994-03-01

    Trustees have an increasing role in the public debt market for project finance. With the responsibility comes the need for clearly defined guidelines. This article examines the need for public financing of power projects, and the role and responsibilities of corporate trustees in this environment.

  1. Corporate Boss, College President

    ERIC Educational Resources Information Center

    Alden, Vernon R.

    1978-01-01

    Differences between the roles of a corporate administrator and a college president are reviewed and related to the role of an effective trustee. It is noted that accountability demands affect institutional autonomy and that trustees must become more involved in policy-making to protect the academic freedom of colleges and universities in the…

  2. The Corporate Classroom.

    ERIC Educational Resources Information Center

    Stenger, Richard S.

    1991-01-01

    In many states, schools use programs developed by industry to teach about environmental issues. Corporate-sponsored curricula appear to expose children to knowledge about nature, energy use, solid waste, and recycling, but they often actually display an incomplete and self-serving picture that is raising concern among environmentalists and…

  3. A corporate supersonic transport

    NASA Technical Reports Server (NTRS)

    Greene, Randall; Seebass, Richard

    1996-01-01

    This talk address the market and technology for a corporate supersonic transport. It describes a candidate configuration. There seems to be a sufficient market for such an aircraft, even if restricted to supersonic operation over water. The candidate configuration's sonic boom overpressure may be small enough to allow overland operation as well.

  4. Corporate Management Invades Academe.

    ERIC Educational Resources Information Center

    Nielsen, Robert M.

    Measures taken to cut costs at the expense of the faculty and the loss in academic quality are shown to be part of a well-organized plan being adopted throughout higher education. Problems have arisen from the activities of the private or semi-private corporate consulting organization in higher education. Taken as a whole, the uncritical use of…

  5. Corporate Training in Museums

    ERIC Educational Resources Information Center

    Causey, Adera

    2011-01-01

    Museums often court corporate audiences through special event rentals and development and promotional partnerships. But we rarely approach them as potential adult learners. In overlooking them, we miss the potential of reaching a large number of often novice museum participants who can gain from gallery learning and develop a relationship with our…

  6. Corporal Punishment and the Schools.

    ERIC Educational Resources Information Center

    Bauer, Gordon B.; And Others

    1990-01-01

    In order to understand and evaluate the continued prevalence of corporal punishment in school systems, this article reviews the following topics: (1) historical issues; (2) current demographics and correlates; (3) the effectiveness of corporal punishment in school settings; (4) myths; (5) alternatives to corporal punishment; and (6) social policy.…

  7. Constructive Engagement with the Corporation

    ERIC Educational Resources Information Center

    Siegel, David J.

    2007-01-01

    Many of the gravest concerns that critics of corporate culture have about the consequences of academic-corporate relationships are built on little more than ill-informed speculation, fueled by a lack of direct engagement with corporations. The solution to knowledge gap--and the key to liberation from fears of "creeping corporatization"--may…

  8. Graphical programming at Sandia National Laboratories

    SciTech Connect

    McDonald, M.J.; Palmquist, R.D.; Desjarlais, L.

    1993-09-01

    Sandia has developed an advanced operational control system approach, called Graphical Programming, to design, program, and operate robotic systems. The Graphical Programming approach produces robot systems that are faster to develop and use, safer in operation, and cheaper overall than altemative teleoperation or autonomous robot control systems. Graphical Programming also provides an efficient and easy-to-use interface to traditional robot systems for use in setup and programming tasks. This paper provides an overview of the Graphical Programming approach and lists key features of Graphical Programming systems. Graphical Programming uses 3-D visualization and simulation software with intuitive operator interfaces for the programming and control of complex robotic systems. Graphical Programming Supervisor software modules allow an operator to command and simulate complex tasks in a graphic preview mode and, when acceptable, command the actual robots and monitor their motions with the graphic system. Graphical Programming Supervisors maintain registration with the real world and allow the robot to perform tasks that cannot be accurately represented with models alone by using a combination of model and sensor-based control.

  9. Sandia National Laboratories Medical Isotope Reactor concept.

    SciTech Connect

    Coats, Richard Lee; Dahl, James J.; Parma, Edward J., Jr.

    2010-04-01

    This report describes the Sandia National Laboratories Medical Isotope Reactor and hot cell facility concepts. The reactor proposed is designed to be capable of producing 100% of the U.S. demand for the medical isotope {sup 99}Mo. The concept is novel in that the fuel for the reactor and the targets for the {sup 99}Mo production are the same. There is no driver core required. The fuel pins that are in the reactor core are processed on a 7 to 21 day irradiation cycle. The fuel is low enriched uranium oxide enriched to less than 20% {sup 235}U. The fuel pins are approximately 1 cm in diameter and 30 to 40 cm in height, clad with Zircaloy (zirconium alloy). Approximately 90 to 150 fuel pins are arranged in the core in a water pool {approx}30 ft deep. The reactor power level is 1 to 2 MW. The reactor concept is a simple design that is passively safe and maintains negative reactivity coefficients. The total radionuclide inventory in the reactor core is minimized since the fuel/target pins are removed and processed after 7 to 21 days. The fuel fabrication, reactor design and operation, and {sup 99}Mo production processing use well-developed technologies that minimize the technological and licensing risks. There are no impediments that prevent this type of reactor, along with its collocated hot cell facility, from being designed, fabricated, and licensed today.

  10. The Sandia Transportable Triggered Lightning Instrumentation Facility

    SciTech Connect

    Schnetzer, G.H.; Fisher, R.J.

    1991-01-01

    Development of the Sandia Transportable Triggered Lightning Instrumentation Facility (SATTLIF) was motivated by a requirement for the in situ testing of munitions storage bunker. Transfer functions relating the incident flash currents to voltages, currents, and electromagnetic field values throughout the structure will be obtained for use in refining and validating a lightning response computer model of this type of structure. A preliminary shakedown trial of the facility under actual operational conditions was performed during the summer of 1990 at the Kennedy Space Center's (KSC) rocket-triggered lightning test site in Florida. A description is given of the SATTLIF, which is readily transportable on a single flatbed truck or by aircraft, and its instrumentation for measuring incident lightning channel currents and the responses of systems under test. Measurements of return-stroke current peaks obtained with the SATLLIF are presented. Agreement with data acquired on the same flashes with existing KSC instrumentation is, on average, to within {approximately}7 percent. Continuing currents were measured with a resolution of {approximately}2.5 A. This field trial demonstrated the practicality of using a transportable triggered lightning facility for specialized test applications. 5 refs., 12 figs., 1 tab.

  11. The Sandia transportable triggered lightning instrumentation facility

    NASA Technical Reports Server (NTRS)

    Schnetzer, George H.; Fisher, Richard J.

    1991-01-01

    Development of the Sandia Transportable Triggered Lightning Instrumentation Facility (SATTLIF) was motivated by a requirement for the in situ testing of a munitions storage bunker. Transfer functions relating the incident flash currents to voltages, currents, and electromagnetic field values throughout the structure will be obtained for use in refining and validating a lightning response computer model of this type of structure. A preliminary shakedown trial of the facility under actual operational conditions was performed during summer of 1990 at the Kennedy Space Center's (KSC) rocket-triggered lightning test site. A description is given of the SATTLIF, which is readily transportable on a single flatbed truck of by aircraft, and its instrumentation for measuring incident lightning channel currents and the responses of the systems under test. Measurements of return-stroke current peaks obtained with the SATTLIF are presented. Agreement with data acquired on the same flashes with existing KSC instrumentation is, on average, to within approximately 7 percent. Continuing currents were measured with a resolution of approximately 2.5 A. This field trial demonstrated the practicality of using a transportable triggered lightning facility for specialized test applications.

  12. Solar energy at Sandia National Laboratories

    SciTech Connect

    1981-12-31

    Basic concepts for using the energy of the sun have been known for centuries. The challenge today, the goal of the Department of Energy`s National Solar Energy Program is to create the technology needed to establish solar energy as a practical, economical alternative to energy produced by depletable fuels--and to use that solar-produced energy in a wide variety of applications. To assist the DOE in this national effort, Sandia sponsors industrial and university research and development, manages a series of technical programs, operates solar experimental facilities, and carries out its own scientific and engineering research. This booklet describes their projects, their technical objectives, and explains how their experimental facilities are used to find the answers we`re seeking. Prospective participants from companies involved in solar-energy development or applications should find it especially useful since it outlines broad areas of opportunity. Projects include: central receiver technology; line-focus thermal technology; photovoltaic systems technology; wind turbine development; energy storage technology; and applied research in improved polycrystalline materials for solar cells and photoelectrolysis of water.

  13. Qualitative risk assessment of Sandia`s rocket preparation and launch facility at Barking Sands, Kauai

    SciTech Connect

    Mahn, J.A.

    1997-12-31

    This paper demonstrates the application of a qualitative methodology for performing risk assessments using the consequence and probability binning criteria of DOE Order 5481.1B. The particular application that is the subject of this paper is a facility risk assessment conducted for Sandia National Laboratories` Kauai Test Facility (KTF). The KTF is a rocket preparation and launch facility operated by Sandia National Laboratories for the Department of Energy and is located on the US Navy`s Pacific Missile Range Facility (PMRF) at Barking Sands on the western side of the island of Kauai, Hawaii. The KTF consists of an administrative compound and main launch facility located on the north end of the PMRF, as well as the small Kokole Point launch facility located on the south end of the PMRF. It is classified as a moderate hazard facility in accordance with DOE Order 5481.1B. As such, its authorization basis for operations necessitates a safety/risk assessment. This paper briefly addresses the hazards associated with KTF operations and the accidents selected for evaluation, introduces the principal elements of the accident assessment methodology, presents analysis details for two of the selected accidents, and provides a summary of results for all of the accidents evaluated.

  14. Sandia National Laboratories participation in the National Ignition Facility project

    SciTech Connect

    Boyes, J.; Boyer, W.; Chael, J.; Cook, D.; Cook, W.; Downey, T.; Hands, J.; Harjes, C.; Leeper, R.; McKay, P.; Micano, P.; Olson, R.; Porter, J.; Quintenz, J.; Roberts, V.; Savage, M.; Simpson, W.; Seth, A.; Smith, R.; Wavrik, M.; Wilson, M.

    1996-08-01

    The National Ignition Facility is a $1.1B DOE Defense Programs Inertial Confinement Fusion facility supporting the Science Based Stockpile Stewardship Program. The goal of the facility is to achieve fusion ignition and modest gain in the laboratory. The NIF project is responsible for the design and construction of the 192 beam, 1.8 MJ laser necessary to meet that goal. - The project is a National project with participation by Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Sandia National Laboratory (SNL), the University of Rochester Laboratory for Laser Energetics (URLLE) and numerous industrial partners. The project is centered at LLNL which has extensive expertise in large solid state lasers. The other partners in the project have negotiated their participation based on the specific expertise they can bring to the project. In some cases, this negotiation resulted in the overall responsibility for a WBS element; in other cases, the participating laboratories have placed individuals in the project in areas that need their individual expertise. The main areas of Sandia`s participation are in the management of the conventional facility design and construction, the design of the power conditioning system, the target chamber system, target diagnostic instruments, data acquisition system and several smaller efforts in the areas of system integration and engineering analysis. Sandia is also contributing to the technology development necessary to support the project by developing the power conditioning system and several target diagnostics, exploring alternate target designs, and by conducting target experiments involving the ``foot`` region of the NIF power pulse. The project has just passed the mid-point of the Title I (preliminary) design phase. This paper will summarize Sandia`s role in supporting the National Ignition Facility and discuss the areas in which Sandia is contributing. 3 figs.

  15. A Sandia nuclear weapon knowledge management program plan for FY 1998--2003. Volume 1: Synopsis

    SciTech Connect

    1998-02-01

    This volume contains a synopsis and briefing charts for a five-year plan which describes a Knowledge Management Program needed to meet Sandia`s responsibility for maintaining safety, security, reliability, and operational effectiveness of the nuclear weapon stockpile. Although the knowledge and expertise required to maintain and upgrade the stockpile continues to be critical to the country`s defense, Sandia`s historical process for developing and advancing future knowledge and expertise needs to be addressed. This plan recommends implementing an aggressive Knowledge Management Program to assure retention and furtherance of Sandia`s expertise, beginning in fiscal year 1998, as an integrated approach to solving the expertise dilemma.

  16. Provider 1997 corporate profiles.

    PubMed

    1997-05-01

    As the long term care industry seeks out new products, new solutions, and new ways of providing quality care, it is important for long term care providers to know more about the companies they do business with. The following corporate profiles showcase information about leading companies in the long term health care industry. Some of the areas highlighted include: mission of company, history, product lines, support services. We hope you will find this information useful when making purchasing decisions, and we're confident you'll keep this issue of Provider as a handy reference guide. The information in the following corporate profiles was supplied by the companies. Neither Provider magazine nor the American Health Care Association endorses the products and services listed in this section. Provider magazine and the American Health Care Association disclaim any and all liability related to or arising from the information contained in the profiles. PMID:10166888

  17. Industrial Analytics Corporation

    SciTech Connect

    Industrial Analytics Corporation

    2004-01-30

    The lost foam casting process is sensitive to the properties of the EPS patterns used for the casting operation. In this project Industrial Analytics Corporation (IAC) has developed a new low voltage x-ray instrument for x-ray radiography of very low mass EPS patterns. IAC has also developed a transmitted visible light method for characterizing the properties of EPS patterns. The systems developed are also applicable to other low density materials including graphite foams.

  18. 1993 Site environmental report Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect

    Culp, T.A.; Cheng, C.F.; Cox, W.; Durand, N.; Irwin, M.; Jones, A.; Lauffer, F.; Lincoln, M.; McClellan, Y.; Molley, K.

    1994-11-01

    This 1993 report contains monitoring data from routine radiological and nonradiological environmental surveillance activities. Summaries of significant environmental compliance programs in progress, such as National Environmental Policy Act documentation, environmental permits, environmental restoration, and various waste management programs for Sandia National Laboratories in Albuquerque, New Mexico, are included. The maximum offsite dose impact was calculated to be 0.0016 millirem. The total population within a 50-mile (80 kilometer) radius of Sandia National Laboratories/New Mexico received an estimated collective dose of 0.027 person-rem during 1993 from the laboratories operations, As in the previous year, the 1993 operations at Sandia National Laboratories/New Mexico had no discernible impact on the general public or on the environment. This report is prepared for the U.S. Department of Energy in compliance with DOE Order 5400.1.

  19. Sandia Advanced MEMS Design Tools, V2.1

    Energy Science and Technology Software Center (ESTSC)

    2002-02-04

    SUMMiT V (Sandia Ultra planar Multi level MEMS Technology) is a 5 level surface micromachine fabrication technology, which customers intornal and external to Sandia can access to fabricate prototype MEMS devices. This CD contains an integrated set of electronic files that: a) Describe the SUMMiT V fabrication process b) Provide enabling educational information (including pictures, videos, technical information) c) Facilitate the process of designing MEMS with the SUMMiT process (prototype file, Design Rule Checker, Standardmore » Parts Library) d) Facilitate the process of having MEMS fabricated at Sandia National Laboratories e) Facilitate the process of having post-fabrication services performed. While there exist some files on the CD that are used in conjunction with software package AutoCAD, these files are not intended for use independent of the CD. Nole that the customer must purchase his/her own copy of Aut0CAD to use with these files.« less

  20. Sandia National Laboratories ASCI Applications Software Quality Engineering Practices

    SciTech Connect

    ZEPPER, JOHN D.; ARAGON, KATHRYN MARY; ELLIS, MOLLY A.; BYLE, KATHLEEN A.; EATON, DONNA SUE

    2002-01-01

    This document provides a guide to the deployment of the software verification activities, software engineering practices, and project management principles that guide the development of Accelerated Strategic Computing Initiative (ASCI) applications software at Sandia National Laboratories (Sandia). The goal of this document is to identify practices and activities that will foster the development of reliable and trusted products produced by the ASCI Applications program. Document contents include an explanation of the structure and purpose of the ASCI Quality Management Council, an overview of the software development lifecycle, an outline of the practices and activities that should be followed, and an assessment tool. These sections map practices and activities at Sandia to the ASCI Software Quality Engineering: Goals, Principles, and Guidelines, a Department of Energy document.

  1. Nuclear energy related capabilities at Sandia National Laboratories

    SciTech Connect

    Pickering, Susan Y.

    2014-02-01

    Sandia National Laboratories' technology solutions are depended on to solve national and global threats to peace and freedom. Through science and technology, people, infrastructure, and partnerships, part of Sandia's mission is to meet the national needs in the areas of energy, climate and infrastructure security. Within this mission to ensure clean, abundant, and affordable energy and water is the Nuclear Energy and Fuel Cycle Programs. The Nuclear Energy and Fuel Cycle Programs have a broad range of capabilities, with both physical facilities and intellectual expertise. These resources are brought to bear upon the key scientific and engineering challenges facing the nation and can be made available to address the research needs of others. Sandia can support the safe, secure, reliable, and sustainable use of nuclear power worldwide by incorporating state-of-the-art technologies in safety, security, nonproliferation, transportation, modeling, repository science, and system demonstrations.

  2. An Approach to Wireless Communications at Sandia National Laboratories

    SciTech Connect

    WITZKE, EDWARD L.

    2002-10-01

    Wireless communication plays an increasing role in military, industrial, public safety, and academic computer networks. Although in general, radio transmitters are not currently permitted in secured areas at Sandia, wireless communications would open new opportunities, allowing mobile and pervasive user access. Without wireless communications, we must live in a ''non-mainstream'' world of fixed, wired networks, where it becomes ever more difficult to attract and retain the best professionals. This report provides a review of the current state of wireless communications, which direction wireless technology is heading, and where wireless technology could be employed at Sandia. A list of recommendations on harnessing the power of wireless communications is provided to aid in building a state-of-the-art communication environment for the 21st century at Sandia.

  3. 1992 Environmental monitoring report, Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect

    Culp, T.; Cox, W.; Hwang, H.; Irwin, M.; Jones, A.; Matz, B.; Molley, K.; Rhodes, W.; Stermer, D.; Wolff, T.

    1993-09-01

    This 1992 report contains monitoring data from routine radiological and nonradiological environmental surveillance activities. summaries of significant environmental compliance programs in progress, such as National Environmental Policy Act documentation, environmental permits, envirorunental restoration, and various waste management programs for Sandia National Laboratories in Albuquerque, New Mexico, are included. The maximum offsite dose impact was calculated to be 0.0034 millirem. The total population within a 50-mile radius of Sandia National Laboratories/New Mexico received an estimated collective dose of 0.019 person-rem during 1992 from the laboratories` operations. As in the previous year, the 1992 operations at Sandia National Laboratories/New Mexico had no discernible impact on the general public or on the environment.

  4. SAMPLE (Sandia agile MEMS prototyping, layout tools, and education)

    NASA Astrophysics Data System (ADS)

    Davies, Brady R.; Craig Barron, Carole; Sniegowski, Jeffry J.; Rodgers, M. Steven

    1997-09-01

    The SAMPLE (Sandia agile MEMS prototyping, layout tools, and education) service makes Sandia's state-of-the-art surface micromachining fabrication process, known as SUMMiT, available to U.S. industry for the first time. The service provides a short course and customized computer-aided design (CAD) tools to assist customers in designing micromachine prototypes to be fabricated in SUMMiT. Frequent small-scale manufacturing runs then provide SAMPLE designers with hundreds of sophisticated MEMS (microelectromechanical systems) chips. SUMMiT (Sandia ultra-planar, multi-level MEMS technology) offers unique surface-micromachining capabilities, including four levels of polycrystalline silicon (including the ground layer), flanged hubs, substrate contacts, one-micron design rules, and chemical-mechanical polishing (CMP) planarization. This paper describes the SUMMiT process, design tools, and other information relevant to the SAMPLE service and SUMMiT process.

  5. Sandia National Laboratories/New Mexico 1994 site environmental report. Summary pamphlet

    SciTech Connect

    1995-12-31

    This document presents details of the environmental activities that occurred during 1994 at Sandia National Laboratories. Topics include: Background about Sandia; radiation facts; sources of radiation; environmental monitoring; discussion of radiation detectors; radioactive waste management; environmental restoration; and quality assurance.

  6. Certain irregularities in the use of computer facilities at Sandia Laboratory

    SciTech Connect

    Not Available

    1980-10-22

    This report concerns irregularities in the use of computer systems at Sandia Laboratories (Sandia) in Albuquerque, New Mexico. Our interest in this subject was triggered when we learned late last year that the Federal Bureau of Investigation (FBI) was planning to undertake an investigation into possible misuse of the computer systems at Sandia. That investigation, which was carried out with the assistance of our staff, disclosed that an employee of Sandia was apparently using the Sandia computer system to assist in running a bookmaking operation for local gamblers. As a result of that investigation, we decided to conduct a separate review of Sandia's computer systems to determine the extent of computer misuse at Sandia. We found that over 200 employees of Sandia had stored games, personal items, classified material, and otherwise sensitive material on their computer files.

  7. Isotopic power supplies for space and terrestrial systems: quality assurance by Sandia National Laboratories

    SciTech Connect

    Hannigan, R.L.; Harnar, R.R.

    1981-09-01

    The Sandia National Laboratories participation in Quality Assurance (QA) programs for Radioisotopic Thermoelectric Generators which have been used in space and terrestrial systems over the past 15 years is summarized. Basic elements of the program are briefly described and recognition of assistance from other Sandia organizations is included. Descriptions of the various systems for which Sandia has had the QA responsibility are also presented. In addition, the outlook for Sandia participation in RTG programs for the next several years is noted.

  8. LANL Transfers Glowing Bio Technology to Sandia Biotech

    SciTech Connect

    Rorick, Kevin

    2012-01-01

    Partnering with Los Alamos National Laboratory, an Albuquerque-based company is seeking to transform the way protein and peptide analysis is conducted around the world. Sandia Biotech is using a biological technology licensed from Los Alamos called split green fluorescent protein (sGFP), as a detecting and tracking tool for the protein and peptide industry, valuable in the fields of Alzheimer's research, drug development and other biotechnology fields using protein folding to understand protein expression and mechanisms of action. http://www.lanl.gov/news/stories/glowing-future-for-los-alamos-and-sandia-b iotech-partnership.html

  9. Sandia National Laboratories ASCI Applications Software Quality Engineering Practices

    SciTech Connect

    ZEPPER, JOHN D.; ARAGON, KATHRYN MARY; ELLIS, MOLLY A.; BYLE, KATHLEEN A.; EATON, DONNA SUE

    2003-04-01

    This document provides a guide to the deployment of the software verification activities, software engineering practices, and project management principles that guide the development of Accelerated Strategic Computing Initiative (ASCI) applications software at Sandia National Laboratories (Sandia). The goal of this document is to identify practices and activities that will foster the development of reliable and trusted products produced by the ASCI Applications program. Document contents include an explanation of the structure and purpose of the ASCI Quality Management Council, an overview of the software development lifecycle, an outline of the practices and activities that should be followed, and an assessment tool.

  10. LANL Transfers Glowing Bio Technology to Sandia Biotech

    ScienceCinema

    Rorick, Kevin

    2012-08-02

    Partnering with Los Alamos National Laboratory, an Albuquerque-based company is seeking to transform the way protein and peptide analysis is conducted around the world. Sandia Biotech is using a biological technology licensed from Los Alamos called split green fluorescent protein (sGFP), as a detecting and tracking tool for the protein and peptide industry, valuable in the fields of Alzheimer's research, drug development and other biotechnology fields using protein folding to understand protein expression and mechanisms of action. http://www.lanl.gov/news/stories/glowing-future-for-los-alamos-and-sandia-b iotech-partnership.html