Science.gov

Sample records for support steklo metallicheskie

  1. FRIT SELECTION TO SUPPORT STEKLO METALLICHESKIE KONSTRUKTSII MELTER TESTING WITH SRNL FEEDS

    SciTech Connect

    Fox, K; James Gillam, J; Tommy Edwards, T; David Peeler, D

    2007-07-26

    Four frits were developed for possible use in melter testing with V.G. Khlopin Radium Institute's Steklo Metallicheskie Konstruktsii (SMK) melter. The frits were selected using Measurement Acceptability Region (MAR) assessments of an array of frit formulations and two Sludge Batch 5 (SB5) flowsheets, one with the anticipated effect of the implementation of Al-dissolution and one without. Test glasses were fabricated in the laboratory to verify that the property and performance models used to select the frits were applicable to the frit/sludge systems of interest. Each of the four frits was tested with each of the two sludges at two different waste loadings, for a total of 16 test glasses. Each glass was both quenched and subjected to the canister centerline cooled (CCC) thermal profile. Samples of each glass were examined for crystallization by X-ray diffraction (XRD) and durability using the Product Consistency Test (PCT). The quenched version of each glass appeared amorphous by visual observations, although XRD results indicated a small amount of crystallization in four of the quenched glasses. Visual observations identified surface crystallization on the CCC versions of all 16 glasses. Three of the 35% waste loading (WL), CCC glasses were found to contain trevorite (a spinel) by XRD, and all of the 40% WL CCC glasses were found to contain trevorite. Nepheline was not observed in any of the test glasses, which is consistent with model predictions.

  2. Tube support

    DOEpatents

    Mullinax, Jerry L.

    1988-01-01

    A tube support for supporting horizontal tubes from an inclined vertical support tube passing between the horizontal tubes. A support button is welded to the vertical support tube. Two clamping bars or plates, the lower edges of one bearing on the support button, are removably bolted to the inclined vertical tube. The clamping bars provide upper and lower surface support for the horizontal tubes.

  3. Nutritional Support

    MedlinePlus

    Nutritional support is therapy for people who cannot get enough nourishment by eating or drinking. You may need ... absorb nutrients through your digestive system You receive nutritional support through a needle or catheter placed in your ...

  4. Peer Support.

    PubMed

    Forchuk, Cheryl; Solomon, Michelle; Viran, Tazim

    2016-01-01

    The Mental Health Commission of Canada defines peer support as "a supportive relationship between people who have a lived experience in common … in relation to a mental health challenge or illness … related to their own mental health or that of a loved one" (Sunderland et al. 2013: 11). In Ontario, a key resource for peer support is the Ontario Peer Development Initiative (OPDI), which is an umbrella organization of mental health Consumer/Survivor Initiatives (CSIs) and peer support organizations across the province of Ontario. Member organizations are run by and for people with lived experience of a mental health or addiction issue and provide a wide range of services and activities within their communities. The central tenet of member organizations is the common understanding that people can and do recover with the proper supports in place and that peer support is integral to successful recovery. Nationally, Peer Support Accreditation and Certification Canada has recently been established. The relatively new national organization focuses on training and accrediting peer support workers. This paper focuses on a range of diverse peer support groups and CSIs that operate in London and surrounding areas. PMID:26854546

  5. Supporting Teachers

    ERIC Educational Resources Information Center

    Lesaux, Nonie K.; Burkhauser, Mary A.; Kelley, Joan G.

    2013-01-01

    Material resources, personalized support, time to collaborate, and strong principal leadership are necessary for making curricular and instructional shifts. The authors of this article share the lessons they learned about supporting implementation of the Common Core State Standards. They draw on interviews with teachers, as well as field notes…

  6. Family Support.

    ERIC Educational Resources Information Center

    Wieck, Colleen, Ed.; McBride, Marijo, Ed.

    1990-01-01

    This "Feature Issue" of the quarterly journal "Impact" presents 19 brief articles on family support systems in the United States for persons with developmental disabilities and their families. Emphasis is on provisions of Public Law 99-457. Articles include: "Family Support in the United States: Setting a Course for the 1990s" (James Knoll);…

  7. Thermal support for scale support

    NASA Technical Reports Server (NTRS)

    Dean, W. G.

    1976-01-01

    The thermal design work completed for the Thermal Protection System (TPS) of the Space Shuttle System (TPS) of the space shuttle vehicle was documented. This work was divided into three phases, the first two of which reported in previous documents. About 22 separate tasks were completed in phase III, such as: hot gas facility (HGF) support, guarded tank support, shuttle external tank (ET) thermal design handbook support, etc.

  8. Pipe support

    DOEpatents

    Pollono, Louis P.

    1979-01-01

    A pipe support for high temperature, thin-walled piping runs such as those used in nuclear systems. A section of the pipe to be supported is encircled by a tubular inner member comprised of two walls with an annular space therebetween. Compacted load-bearing thermal insulation is encapsulated within the annular space, and the inner member is clamped to the pipe by a constant clamping force split-ring clamp. The clamp may be connected to pipe hangers which provide desired support for the pipe.

  9. Supportive Care.

    PubMed

    Olsen, Pia Riis; Lorenzo, Rosalía

    2016-01-01

    This chapter takes its point of departure in psychosocial aspects of supportive care in adolescent and young adult cancer care. The purpose is to describe some of the challenges that these young people face following a cancer diagnosis and guide healthcare professionals in how to provide care that improves the quality of life. In most hospitals and healthcare systems, adolescents and young adults are cared for and treated in settings for children or adults. Accordingly, healthcare professionals may lack attention to and knowledge about what characterize young peoples' life situation, their special needs and how to meet them. The topics we include in the chapter are the following: the youth friendly environment, social support and social network, parents, information during a psychosocial crisis event, the use of HEADSS, peer support, fertility, body image and self-esteem, after treatment and future challenges and palliative and end of life care. PMID:27595353

  10. Mirror Support

    NASA Technical Reports Server (NTRS)

    Baron, Richard L. (Inventor)

    2013-01-01

    Disclosed herein is a method of making a mirror support comprising a composite, the composite comprising a plurality of carbon nanotubes, wherein at least two of the plurality of carbon nanotubes are bonded to each other through a bridging moiety bound to each of the two carbon nanotubes, and a laminate comprising the composite.

  11. Differentiated Support

    ERIC Educational Resources Information Center

    Flannagan, Jenny Sue; Kelly, Mike

    2009-01-01

    Supporting teachers begins with designing professional learning that is responsive to their needs. Gone are the days of one-size-fits all professional development. Principals cannot ensure that all teachers are effective in the classroom if they don't create learning opportunities that move all teachers toward expertise with teaching. In this…

  12. Administrative Support.

    ERIC Educational Resources Information Center

    Doran, Dorothy; And Others

    This guide is intended to assist business education teachers in administrative support courses. The materials presented are based on the Arizona validated occupational competencies and tasks for the occupations of receptionist, secretary, and administrative assistant. Word processing skills have been infused into each of the three sections. The…

  13. Supporting Diversity.

    ERIC Educational Resources Information Center

    Horton, Betty, Ed.; And Others

    1996-01-01

    This newsletter feature issue focuses on services for persons with developmental disabilities that support the whole person by acknowledging, respecting, and incorporating aspects of identity such as race, ethnicity, religion, sexual orientation, gender, age, and class. Articles include: (1) "Serving the Whole Person: The Journey to Embracing…

  14. Supporting members

    NASA Astrophysics Data System (ADS)

    Life Supporting Members L. Thomas Aldrich Thomas D. Barrow Hugh J . A. Chivers Allan V. Cox Samuel S. Goldich Pembroke J. Hart A. Ivan Johnson Helmut E. Landsberg Paolo Lanzano Murli H. Manghnani L. L. Nettleton Charles B. Officer Hyman Orlin Ned A. Ostenso Erick O. Schonstedt Waldo E. Smith Athelstan Spilhaus A. F. Spilhaus, Jr. John W. Townsend, Jr. James A. Van Allen Leonard W. Weis Charles A. Whitten J. Tuzo Wilson

  15. Industry Support

    NASA Technical Reports Server (NTRS)

    2003-01-01

    NASA Glenn Research Center (GRC) is responsible for the Advanced Communications for Air Traffic Management (AC/ATM) Project, a sub-element task of the Advanced Air Transportation Technologies (AATT) Project of the NASA Aviation System Capacity Program (ASC). The AC/ATM Project is developing new communications technologies and tools that will improve throughput in the U.S. Air Traffic Control System. The goal of the AC/ATM Project is to enable a communications infrastructure providing the capacity, efficiency, and flexibility necessary to realize benefits of the future mature Free-Flight environment. The capabilities and scope of communications technologies needed to accomplish this goal depend on characteristics of the future Free-Flight environment. There are many operational concepts being proposed for a future ATM system to enable user flexibility and efficiency. GRC s focus is on developing new technologies and techniques to support the digital communication of information involving airborne and ground-based users. However, the technologies and techniques must be integrated with the systems and services that industry and the Federal Aviation Administration (FAA) are developing. Thus, GRC needs to monitor and provide input to the various industry and FAA organizations and committees that are specifying new systems and services. Adoption of technologies by the FAA is partially dependent on acceptance of the technology by the aviation community. The commercial aviation community in particular would like to adopt technologies that can be used throughout the world. As a result, the adoption of common or at least compatible technologies by European countries is a key factor in getting commitments to those technologies by the US aviation community. GRC desires to keep informed of European activities that relate to aviation communication technologies, particularly those that are being supported by Eurocontrol.

  16. Do Formal Supports Replace Informal Supports?

    ERIC Educational Resources Information Center

    Barer, Barbara M.; And Others

    Health policy researchers have long been interested in the extent to which the provision of formal supports replaces or undermines the informal support system. This study examined the linkages between the formal and informal support system as they are mediated by a health care setting which readily provides patients with access to social services.…

  17. Overview of Supported Employment.

    ERIC Educational Resources Information Center

    Rusch, Frank R.; Hughes, Carolyn

    1989-01-01

    This review defines supported employment, presents a rationale for it, describes four types of placement models, outlines supported employment program components, and analyzes effectiveness and populations served. The contributions of applied behavior analysis to supported employment are examined. (JDD)

  18. Quality user support: Supporting quality users

    SciTech Connect

    Woolley, T.C.

    1994-12-31

    During the past decade, fundamental changes have occurred in technical computing in the oil industry. Technical computing systems have moved from local, fragmented quantity, to global, integrated, quality. The compute power available to the average geoscientist at his desktop has grown exponentially. Technical computing applications have increased in integration and complexity. At the same time, there has been a significant change in the work force due to the pressures of restructuring, and the increased focus on international opportunities. The profile of the user of technical computing resources has changed. Users are generally more mature, knowledgeable, and team oriented than their predecessors. In the 1990s, computer literacy is a requirement. This paper describes the steps taken by Oryx Energy Company to address the problems and opportunities created by the explosive growth in computing power and needs, coupled with the contraction of the business. A successful user support strategy will be described. Characteristics of the program include: (1) Client driven support; (2) Empowerment of highly skilled professionals to fill the support role; (3) Routine and ongoing modification to the support plan; (4) Utilization of the support assignment to create highly trained advocates on the line; (5) Integration of the support role to the reservoir management team. Results of the plan include a highly trained work force, stakeholder teams that include support personnel, and global support from a centralized support organization.

  19. Pelvic Support Problems

    MedlinePlus

    ... correct pelvic support problems? • Glossary What are pelvic support problems? The pelvic organs include the vagina , cervix , uterus , bladder , urethra , small intestines, and rectum . The pelvic ...

  20. Child Support Report, 1999.

    ERIC Educational Resources Information Center

    Sharman, Phil, Ed.

    1999-01-01

    This document comprises the 12 issues for 1999 of the "Child Support Report," which explores problems related to child support enforcement, reports on federal and state government child support enforcement initiatives, and summarizes research related to child support. Editorials and information on events and conferences of interest and funding…

  1. Child Support Report, 1998.

    ERIC Educational Resources Information Center

    Sharman, Phil, Ed.

    1998-01-01

    This document is comprised of the 12 monthly issues of the 1998 "Child Support Report," which explores problems related to child support enforcement, reports on federal and state government child support enforcement initiatives, and summarizes research related to child support. Editorials and information on events and conferences of interest and…

  2. Child Support Report, 2001.

    ERIC Educational Resources Information Center

    Sharman, Phil, Ed.

    2001-01-01

    This document comprises the 12 issues for 2001 of the "Child Support Report," which explores problems related to child support enforcement, reports on federal and state government child support enforcement initiatives, and summarizes research related to child support. Featured regularly are editorials and information on events of interest and…

  3. Child Support Report, 1997.

    ERIC Educational Resources Information Center

    Sharman, Phil, Ed.

    1997-01-01

    This document consists of the twelve issues of "Child Support Report" newsletter published during 1997. Monthly issues typically explore problems related to child support enforcement, report on federal and state government child support enforcement initiatives, and summarize research related to child support. Editorials and information on events…

  4. Flowcharts as Technical Support

    ERIC Educational Resources Information Center

    Caudill, Jason

    2007-01-01

    Any time technology is employed in an organization there is a need to provide support for the users. Such support usually needs to be offered at the location where users are trying to access the technological resources. More often than not, the user who needs the support wants to get the support immediately, not at some point in the future after a…

  5. Child Support Report, 2002.

    ERIC Educational Resources Information Center

    Sharman, Phil, Ed.

    2002-01-01

    This document comprises the 12 issues for 2002 of the Child Support Report, which explores problems related to child support enforcement, reports on federal and state government child support enforcement initiatives, and summarizes research related to child support. Featured regularly are editorials and information on events of interest and…

  6. Child Support Report, 2000.

    ERIC Educational Resources Information Center

    Sharman, Phil, Ed.

    2000-01-01

    This document comprises the 12 issues for 2000 of the "Child Support Report," which explores problems related to child support enforcement, reports on federal and state government child support enforcement initiatives, and summarizes research related to child support. Featured regularly are editorials and information on events of interest and…

  7. Reactor vessel support system

    DOEpatents

    Golden, Martin P.; Holley, John C.

    1982-01-01

    A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

  8. Supported PV module assembly

    SciTech Connect

    Mascolo, Gianluigi; Taggart, David F.; Botkin, Jonathan D.; Edgett, Christopher S.

    2013-10-15

    A supported PV assembly may include a PV module comprising a PV panel and PV module supports including module supports having a support surface supporting the module, a module registration member engaging the PV module to properly position the PV module on the module support, and a mounting element. In some embodiments the PV module registration members engage only the external surfaces of the PV modules at the corners. In some embodiments the assembly includes a wind deflector with ballast secured to a least one of the PV module supports and the wind deflector. An array of the assemblies can be secured to one another at their corners to prevent horizontal separation of the adjacent corners while permitting the PV modules to flex relative to one another so to permit the array of PV modules to follow a contour of the support surface.

  9. Exercise support for therapy

    NASA Technical Reports Server (NTRS)

    Long, M. J.; Irick, S. C.

    1976-01-01

    Constant-value weight-relieving apparatus, which moves on rollers on overhead track, supports weight of walking, stooping, squatting, or standing patient with combination of multiple pulleys and spring clusters. Individually preselected support force is constant for all movements.

  10. Postpartum Support International

    MedlinePlus

    ... An Emergency Help in my Area: Support Map International Support PSI Warmline (English and Spanish) PSI Ayuda ... Psychosis Related Tragedies Order PSI Conference Recordings The International Marcé Society Research and Review Multi-Language Resources ...

  11. Giotto mission support

    NASA Technical Reports Server (NTRS)

    Stelzried, C.; Howe, T.

    1986-01-01

    Deep Space Network (DSN) support of the Giotto mission to Comet Halley is summarized. The support is described beginning with the prelaunch testing and continues through the post comet encounter period.

  12. Fathers Can Support Breastfeeding

    MedlinePlus

    ... System Women, Infants and Children (WIC) Fathers Supporting Breastfeeding Last Published: 05/26/2016 Email Updates Click ... in each of the materials. FATHERS CAN SUPPORT BREASTFEEDING Poster - FNS 354 Be a Part of the ...

  13. SUPERFUND REMOTE SENSING SUPPORT

    EPA Science Inventory

    This task provides remote sensing technical support to the Superfund program. Support includes the collection, processing, and analysis of remote sensing data to characterize hazardous waste disposal sites and their history. Image analysis reports, aerial photographs, and assoc...

  14. SUPERFUND TECHNICAL SUPPORT

    EPA Science Inventory

    Under this task, technical support is provided to Regional Remedial Project Managers (RPMs)/On-Scene Coordinators (OSCs) at Superfund, RCRA, and Brownfields sites contaminated with hazardous materials by the Technical Support Center (TSC) for Monitoring and Site Characterization....

  15. In Support of Families.

    ERIC Educational Resources Information Center

    Murphy, Albert T.

    1979-01-01

    The article discusses support services and sources for the families of handicapped children. Aspects covered include family involvement in early childhood education programs, emotional support, and family mental health. The characteristics of the "ideal" family are also discussed. (DLS)

  16. Learner and Faculty Support

    ERIC Educational Resources Information Center

    Guan, Sharon; Stanford, Daniel

    2016-01-01

    This chapter identifies effective ways to address learner and faculty support. It introduces methods for building a successful learner support system by providing sufficient resources and proactively addressing learner motivation. It also addresses effective faculty support through institutional policies, resources, training, and course…

  17. Culture and Social Support

    ERIC Educational Resources Information Center

    Kim, Heejung S.; Sherman, David K.; Taylor, Shelley E.

    2008-01-01

    Social support is one of the most effective means by which people can cope with stressful events. Yet little research has examined whether there are cultural differences in how people utilize their social support networks. A review of studies on culture and social support presents evidence that Asians and Asian Americans are more reluctant to…

  18. Advanced Life Support

    NASA Technical Reports Server (NTRS)

    Chambliss, Joe

    2004-01-01

    Viewgraphs on Advanced Life Support (ALS) Systems are presented. The topics include: 1) Fundamental Need for Advanced Life Support; 2) ALS organization; 3) Requirements and Rationale; 4) Past Integrated tests; 5) The need for improvements in life support systems; 6) ALS approach to meet exploration goals; 7) ALS Projects showing promise to meet exploration goals; and 9) GRC involvement in ALS.

  19. Supported employment, supported education, and career development.

    PubMed

    Mueser, Kim T; Cook, Judith A

    2012-12-01

    Two articles in the current issue of the Psychiatric Rehabilitation Journal bring into focus the important question of the importance of work, and in particular meaningful employment, in people with a serious mental illness. Gewurtz, Cott, Rush, and Kirsh (see record 2012-34112-003) present findings from a change in policy in Canada for the funding of vocational services for people with a serious mental illness from a fee-for-service model to an outcomes-based model, with reimbursement based on successful competitive job placement and retention, irrespective of job type and consumer preference. The results indicated increased rates of competitive work, mainly in entry-level jobs, but they also raised questions as to whether the narrow focus on job attainment may have been at the cost of less career development and ultimately less meaningful work for the consumers. Baksheev, Allott, Jackson, McGorry, and Killackey (see record 2012-34112-002) found that a combined supported employment and education program for people with a first episode of psychosis led to higher rates of employment and class completion than usual services. The analysis presented in this report showed that no individual consumer characteristics other than program assignment (supported employment and education vs. usual services) predicted vocational or educational outcomes. The findings underscore the potency of supported employment, and suggest that combining it with educational services may be fruitful for people who have recently experienced an episode of psychosis. These findings raise several questions that will be touched on in this editorial, including: Why are career development and supported education important? What have we learned about supported education? What are the current gaps in our knowledge about supported education? PMID:23276233

  20. Supported microporous ceramic membranes

    DOEpatents

    Webster, E.; Anderson, M.

    1993-12-14

    A method for the formation of microporous ceramic membranes onto a porous support includes placing a colloidal suspension of metal or metal oxide particles on one side of the porous support and exposing the other side of the porous support to a drying stream of gas or a reactive gas stream so that the particles are deposited on the drying side of the support as a gel. The gel so deposited can be sintered to form a supported ceramic membrane useful for ultrafiltration, reverse osmosis, or molecular sieving having mean pore sizes less than 100 Angstroms. 4 figures.

  1. Supported microporous ceramic membranes

    DOEpatents

    Webster, Elizabeth; Anderson, Marc

    1993-01-01

    A method for permformation of microporous ceramic membranes onto a porous support includes placing a colloidal suspension of metal or metal oxide particles on one side of the porous support and exposing the other side of the porous support to a drying stream of gas or a reactive gas stream so that the particles are deposited on the drying side of the support as a gel. The gel so deposited can be sintered to form a supported ceramic membrane useful for ultrafiltration, reverse osmosis, or molecular sieving having mean pore sizes less than 100 Angstroms.

  2. Identification of support conditions

    SciTech Connect

    Simmermacher, T.; Mayes, R.; Carne, T.G.

    1998-12-31

    In this paper, a support and preload system is presented in which the frequencies and damping of the test article are affected by the stiffness and damping of the supporting structure. A dynamic model is derived for the support system that includes the damping as well as the mass and stiffness of the supports. The frequencies, damping, and mode shapes are compared with the experimentally determined parameters. It is shown that for a seemingly simple support system, deriving a predictive model is not a trival task.

  3. Cryogenic support system

    DOEpatents

    Nicol, T.H.; Niemann, R.C.; Gonczy, J.D.

    1988-11-01

    A support system is disclosed for restraining large masses at very low or cryogenic temperatures. The support system employs a tie bar that is pivotally connected at opposite ends to an anchoring support member and a sliding support member. The tie bar extends substantially parallel to the longitudinal axis of the cold mass assembly, and comprises a rod that lengthens when cooled and a pair of end attachments that contract when cooled. The rod and end attachments are sized so that when the tie bar is cooled to cryogenic temperature, the net change in tie bar length is approximately zero. Longitudinal force directed against the cold mass assembly is distributed by the tie bar between the anchoring support member and the sliding support member. 7 figs.

  4. Cryogenic support system

    DOEpatents

    Nicol, Thomas H.; Niemann, Ralph C.; Gonczy, John D.

    1988-01-01

    A support system is disclosed for restraining large masses at very low or cryogenic temperatures. The support system employs a tie bar that is pivotally connected at opposite ends to an anchoring support member and a sliding support member. The tie bar extends substantially parallel to the longitudinal axis of the cold mass assembly, and comprises a rod that lengthens when cooled and a pair of end attachments that contract when cooled. The rod and end attachments are sized so that when the tie bar is cooled to cryogenic temperature, the net change in tie bar length is approximately zero. Longitudinal force directed against the cold mass assembly is distributed by the tie bar between the anchoring support member and the sliding support member.

  5. Crystalline titanate catalyst supports

    DOEpatents

    Anthony, R.G.; Dosch, R.G.

    1993-01-05

    A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

  6. Hydrostatic bearing support

    NASA Technical Reports Server (NTRS)

    Cunningham, R. E. (Inventor)

    1977-01-01

    A hydrostatic bearing support system is provided which comprises a bearing housing having a polygonally configured outer surface which defines at least three symmetrically disposed working faces and a plurality of pressure plates, each of which is disposed relatively opposite a corresponding working face and spaced therefrom to define a gap therebetween. A hydrostatic support film is created in the gap for supporting the housing in spaced relationship to the pressure plates.

  7. Crystalline titanate catalyst supports

    SciTech Connect

    Anthony, R.G.; Dosch, R.G.

    1991-12-31

    A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

  8. Communications Support Processor (CSP)

    NASA Astrophysics Data System (ADS)

    Konopik, M. G.; Mack, R. B.

    1983-02-01

    This report discusses the advanced capabilities developed for the Communications Support Processor and the impact these capabilities have on the system and its users. The technical performance of the CSP, and the CSP system support functions and the on-site maintenance support are detailed in this report. The improvements to the CSP system include improved transportability site-unique gateways, on-line retrieval of traffic, plain language addressing and the fully automated routing of messages.

  9. Conduction cooled tube supports

    DOEpatents

    Worley, Arthur C.; Becht, IV, Charles

    1984-01-01

    In boilers, process tubes are suspended by means of support studs that are in thermal contact with and attached to the metal roof casing of the boiler and the upper bend portions of the process tubes. The support studs are sufficiently short that when the boiler is in use, the support studs are cooled by conduction of heat to the process tubes and the roof casing thereby maintaining the temperature of the stud so that it does not exceed 1400.degree. F.

  10. Crystalline titanate catalyst supports

    DOEpatents

    Anthony, Rayford G.; Dosch, Robert G.

    1993-01-01

    A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

  11. Vessel structural support system

    SciTech Connect

    Jenko, J.X.; Ott, H.L.; Wilson, R.M.; Wepfer, R.M.

    1992-10-06

    Vessel structural support system for laterally and vertically supporting a vessel, such as a nuclear steam generator having an exterior bottom surface and a side surface thereon is disclosed. The system includes a bracket connected to the bottom surface. A support column is pivotally connected to the bracket for vertically supporting the steam generator. The system also includes a base pad assembly connected pivotally to the support column for supporting the support column and the steam generator. The base pad assembly, which is capable of being brought to a level position by turning leveling nuts, is anchored to a floor. The system further includes a male key member attached to the side surface of the steam generator and a female stop member attached to an adjacent wall. The male key member and the female stop member coact to laterally support the steam generator. Moreover, the system includes a snubber assembly connected to the side surface of the steam generator and also attached to the adjacent wall for dampening lateral movement of the steam generator. In addition, the system includes a restraining member of flat'' attached to the side surface of the steam generator and a bumper attached to the adjacent wall. The flat and the bumper coact to further laterally support the steam generator. 19 figs.

  12. Vessel structural support system

    DOEpatents

    Jenko, James X.; Ott, Howard L.; Wilson, Robert M.; Wepfer, Robert M.

    1992-01-01

    Vessel structural support system for laterally and vertically supporting a vessel, such as a nuclear steam generator having an exterior bottom surface and a side surface thereon. The system includes a bracket connected to the bottom surface. A support column is pivotally connected to the bracket for vertically supporting the steam generator. The system also includes a base pad assembly connected pivotally to the support column for supporting the support column and the steam generator. The base pad assembly, which is capable of being brought to a level position by turning leveling nuts, is anchored to a floor. The system further includes a male key member attached to the side surface of the steam generator and a female stop member attached to an adjacent wall. The male key member and the female stop member coact to laterally support the steam generator. Moreover, the system includes a snubber assembly connected to the side surface of the steam generator and also attached to the adjacent wall for dampening lateral movement of the steam generator. In addition, the system includes a restraining member of "flat" attached to the side surface of the steam generator and a bumper attached to the adjacent wall. The flat and the bumper coact to further laterally support the steam generator.

  13. Nanostructured catalyst supports

    DOEpatents

    Zhu, Yimin; Goldman, Jay L.; Qian, Baixin; Stefan, Ionel C.

    2012-10-02

    The present invention relates to SiC nanostructures, including SiC nanopowder, SiC nanowires, and composites of SiC nanopowder and nanowires, which can be used as catalyst supports in membrane electrode assemblies and in fuel cells. The present invention also relates to composite catalyst supports comprising nanopowder and one or more inorganic nanowires for a membrane electrode assembly.

  14. Nanostructured catalyst supports

    DOEpatents

    Zhu, Yimin; Goldman, Jay L.; Qian, Baixin; Stefan, Ionel C.

    2015-09-29

    The present invention relates to SiC nanostructures, including SiC nanopowder, SiC nanowires, and composites of SiC nanopowder and nanowires, which can be used as catalyst supports in membrane electrode assemblies and in fuel cells. The present invention also relates to composite catalyst supports comprising nanopowder and one or more inorganic nanowires for a membrane electrode assembly.

  15. Fatherhood and Family Support.

    ERIC Educational Resources Information Center

    Goetz, Kathy, Ed.

    1996-01-01

    On the assumption that fathers have been relatively absent from family support programs, this publication of the Family Resource Coalition addresses the role of fathers in family support programs, examines the impact of fathers on their children, and describes programs involving fathers successfully. Articles include: (1) "What's Behind the…

  16. Cryogenic skirt support post

    NASA Astrophysics Data System (ADS)

    Niemann, R. C.; Buckles, W. E.

    The cold masses of cryostats having vertical axes, like vertical pressure vessels, can be effectively supported by means of a cylindrical skirt that wraps concentrically around the cold mass. The skirt is a cryogenic support post connected at its upper end to the cold mass and at its lower end to the cryostat vacuum vessel. A heat intercept connection to an intermediate temperature refrigeration source can be employed to control heat leak. The support post consists of a composite; e.g. epoxy fibreglass, or cylinder with bolted or thermal interference fit end connections. The support post, being a single element support, simplifies cryostat assembly and alignment. The composite cylinder, with a relatively large diameter, lends itself to structural soundness and stability under both static and dynamic loading conditions. Its relatively long length and intermediate temperature heat intercept allows low heat leak to the cold mass. The details of the design of a cryogenic skirt support post as applied to a superconducting magnetic energy storage cryostat are presented. Included are support post fabrication, cryostat assembly, and predicted structural and thermal performance. Fabrication of and operational experiences with a prototype support post assembly are discussed.

  17. Supporting Inclusive Practice

    ERIC Educational Resources Information Center

    Knowles, Gianna

    2006-01-01

    Written to support all teaching and learning staff in developing good inclusive practice, this book provides knowledge and understanding about a range of inclusion issues, such as what an inclusive school might look like and practical guidance on supporting the development of such a school. It also explores issues surrounding: (1) Ethnicity; (2)…

  18. Biology Curriculum Support Document.

    ERIC Educational Resources Information Center

    North Carolina Dept. of Public Instruction, Raleigh.

    This biology curriculum supplement includes the North Carolina Standard Course of Study Goals, helpful resources, and suggested activities supported by inquiry-based laboratory activities. Contents include a detailed description of content which provides the goals and standards being sough), a materials list for inquiry support labs and…

  19. Steam generator support system

    DOEpatents

    Moldenhauer, James E.

    1987-01-01

    A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances.

  20. Steam generator support system

    DOEpatents

    Moldenhauer, J.E.

    1987-08-25

    A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source is disclosed. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances. 4 figs.

  1. Supported double membranes

    PubMed Central

    Murray, David H.; Tamm, Lukas K.; Kiessling, Volker

    2009-01-01

    Planar model membranes, like supported lipid bilayers and surface-tethered vesicles, have been proven to be useful tools for the investigation of complex biological functions in a significantly less complex membrane environment. In this study, we introduce a supported double membrane system that should be useful for studies that target biological processes in the proximity of two lipid bilayers such as the periplasm of bacteria and mitochondria or the small cleft between pre-and postsynaptic neuronal membranes. Large unilamellar vesicles (LUV) were tethered to a preformed supported bilayer by a biotin-streptavidin tether. We show from single particle tracking (SPT) experiments that these vesicle are mobile above the plane of the supported membrane. At higher concentrations, the tethered vesicles fuse to form a second continuous bilayer on top of the supported bilayer. The distance between the two bilayers was determined by fluorescence interference contrast (FLIC) microscopy to be between 16 and 24 nm. The lateral diffusion of labeled lipids in the second bilayer was very similar to that in supported membranes. SPT experiments with reconstituted syntaxin-1A show that the mobility of transmembrane proteins was not improved when compared with solid supported membranes. PMID:19236921

  2. Support For Fragile Borescopes

    NASA Technical Reports Server (NTRS)

    Brown, William S.; Janke, David E.

    1988-01-01

    Fixture supports thin borescopes during inspections through 0.0405-in. orifices. Porescopes, which have diameter of 0.037 in., extremely fragile and often fractured during inspections, contaminating inspected cavitites with debris. Nylon guide tip and acrylic support sleeve and body protect and guide a fragile borescope. Support sleeve press-fitted on body and removed when little clearance around orifice inspected. Otherwise, it helps to stablize fixture. Helps to prevent damage caused by vibrations and eliminates constantly moving view that afflicts unsupported small-diameter borescopes.

  3. MSUD Family Support Group

    MedlinePlus

    ... 2.1M to develop first drug for Maple Syrup Urine Disease Baby screening: Life-saving scheme expanded ... does not replace medical consultation. The MSUD (Maple Syrup Urine Disease) Family Support Group is not liable ...

  4. Supporting Members and Friends

    NASA Astrophysics Data System (ADS)

    2005-10-01

    Thank you! Over the past year, AGU has received 12,104 gifts, both large and small, from members and friends. The Union has also received corporate contributions, National Science Foundation grants, and support from the National Oceanographic Partnership Program and National Association of Geoscience Teachers. Together their generosity has benefited AGU non revenue producing programs that are critical to our science and the future health of the Union. The following list gratefully acknowledges annual gifts of $100 or more and cumulative giving of $5,000 or more. The 1919 Society ($100,000 or more) and Benefactors ($5,000-$99,999) recognize single major gifts and cumulative contributions. Three circles acknowledge annual giving: President's Circle ($1,000 or more), Leadership Circle ($200-$999), and Supporters Circle ($100-$199). Supporting Life Members, who contribute a one-time gift of $1,200 in addition to lifetime dues, are among our most loyal Supporters.

  5. Supporting Members and Friends

    NASA Astrophysics Data System (ADS)

    2004-09-01

    Thank you! Over the past 20 months AGU has received a record 22,159 gifts, both large and small, from members and friends. The Union has also received corporate contributions, National Science Foundation grants, and support from four federal agencies (NASA, NOAA, EPA, and USGS). Together their generosity has benefited AGU non-revenue producing programs that are critical to our science and the future health of the Union. The following list gratefully acknowledges annual gifts of $100 or more and cumulative giving of $5000 or more. The 1919 Society ($100,000+) and Benefactors ($5,000-$99,999) recognize single major and cumulative contributions. Three circles acknowledge annual giving: President's Circle ($1,000 or more), Leadership Circle ($250-$999), and Supporters Circle ($100-$249). Supporting Life Members, who contribute a one-time gift of $1,200 in addition to lifetime dues, are recognized as our most loyal Supporters.

  6. Chromatography resin support

    DOEpatents

    Dobos, James G.

    2002-01-01

    An apparatus and method of using an improved chromatography resin support is disclosed. The chromatography support platform is provided by a stainless steel hollow cylinder adapted for being inserted into a chromatography column. An exterior wall of the stainless steel cylinder defines a groove for carrying therein an "O"-ring. The upper surface of the stainless steel column is covered by a fine stainless steel mesh welded to the edges of the stainless steel cylinder. When placed upon a receiving ledge defined within a chromatography column, the "O"-ring provides a fluid tight seal with the inner edge wall of the chromatography cylinder. The stainless steel mesh supports the chromatography matrix and provides a back flushable support which is economical and simple to construct.

  7. Mantis BT Cluster Support

    Energy Science and Technology Software Center (ESTSC)

    2009-06-05

    The software is a modidication to the Mantis BT V1.5 open source application provided by the mantis BT group to support cluster web servers. It also provides various cosmetic modifications used a LLNL.

  8. Regenerative Life Support Evaluation

    NASA Technical Reports Server (NTRS)

    Kleiner, G. N.; Thompson, C. D.

    1977-01-01

    This paper describes the development plan and design concept of the Regenerative Life Support Evaluation (RLSE) planned for flight testing in the European Space Agency Spacelab. The development plan encompasses the ongoing advanced life support subsystem and a systems integration effort to evolve concurrently subsystem concepts that perform their function and can be integrated with other subsystems in a flight demonstration of a regenerative life support system. The design concept for RLSE comprises water-electrolysis O2 generation, electrochemically depolarized CO2 removal, and Sabatier CO2 reduction for atmosphere regeneration, urine vapor-compression distillation, and wash-water hyperfiltration for waste-water recovery. The flight demonstration by RLSE is an important step in qualifying the regenerative concepts for life support in space stations.

  9. Stop smoking support programs

    MedlinePlus

    Smokeless tobacco - stop smoking programs; Stop smoking techniques; Smoking cessation programs; Smoking cessation techniques ... It is hard to quit smoking if you are acting alone. Smokers may have a ... of quitting with a support program. Stop smoking programs ...

  10. Stop smoking support programs

    MedlinePlus

    Smokeless tobacco - stop smoking programs; Stop smoking techniques; Smoking cessation programs; Smoking cessation techniques ... also provide ongoing support for staying away from tobacco. Be wary of programs that: Are short and ...

  11. Supported inorganic membranes

    DOEpatents

    Sehgal, Rakesh; Brinker, Charles Jeffrey

    1998-01-01

    Supported inorganic membranes capable of molecular sieving, and methods for their production, are provided. The subject membranes exhibit high flux and high selectivity. The subject membranes are substantially defect free and less than about 100 nm thick. The pores of the subject membranes have an average critical pore radius of less than about 5 .ANG., and have a narrow pore size distribution. The subject membranes are prepared by coating a porous substrate with a polymeric sol, preferably under conditions of low relative pressure of the liquid constituents of the sol. The coated substrate is dried and calcined to produce the subject supported membrane. Also provided are methods of derivatizing the surface of supported inorganic membranes with metal alkoxides. The subject membranes find use in a variety of applications, such as the separation of constituents of gaseous streams, as catalysts and catalyst supports, and the like.

  12. SAE Standards Support

    SciTech Connect

    Gowri, Krishnan

    2012-11-01

    This report summarizes PNNL activities in FY 2012 in support of the following two vehicle communication standards activities: • Technical support to SAE, ANSI and NIST technical working groups. PNNL actively contributed to the use case development, harmonization, and evaluation of the SAE standards activities for vehicle to grid communication • Tested and validated a set of potential technologies for meeting SAE communication requirements and provided recommendations for technology choices.

  13. Supportive housing and surveillance.

    PubMed

    Boyd, Jade; Cunningham, David; Anderson, Solanna; Kerr, Thomas

    2016-08-01

    Urban centres in the US, Britain and Canada have responded to identified visible 'social problems' such addiction, mental health and homelessness by providing some supportive housing for the urban poor and marginalized. While some critics have questioned what supportive housing specifically entails in terms of the built environment, what remains under explored, though a growing area of concern, is the relationship between surveillance and supportive housing for urban residents identified as having addiction and mental health problems - a gap addressed in this paper. Drawing upon qualitative ethnographic observational data we examine some of the measures of control and coercion that are encroaching into social housing primarily established for poor and marginalized people with addiction and mental health problems in the urban centre of Vancouver, Canada. We witnessed three modes of regulation and control, that vary widely, among the residencies observed: physical surveillance technologies; site-specific modes of coercion; police presence and staff surveillance, which all together impact the everyday lives of residents living in low-income and supportive housing. We argue that supportive housing has the potential to provide its intended commitment - safe and secure affordable housing. However, owing to an (over)emphasis on 'security', the supportive housing we observed were also sites of social control. PMID:27453148

  14. MSFC Skylab operations support summary

    NASA Technical Reports Server (NTRS)

    Martin, J. R.

    1974-01-01

    A summary of the actions and problems involved in preparing the Skylab-one vehicle is presented. The subjects discussed are: (1) flight operations support functions and organization, (2) launch operations and booster flight support functions and organization, (3) Skylab launch vehicle support teams, (4) Skylab orbital operations support performance analysis, (5) support manning and procedures, and (6) data support and facilities.

  15. Concentric tube support assembly

    DOEpatents

    Rubio, Mark F.; Glessner, John C.

    2012-09-04

    An assembly (45) includes a plurality of separate pie-shaped segments (72) forming a disk (70) around a central region (48) for retaining a plurality of tubes (46) in a concentrically spaced apart configuration. Each segment includes a support member (94) radially extending along an upstream face (96) of the segment and a plurality of annularly curved support arms (98) transversely attached to the support member and radially spaced apart from one another away from the central region for receiving respective upstream end portions of the tubes in arc-shaped spaces (100) between the arms. Each segment also includes a radial passageway (102) formed in the support member for receiving a fluid segment portion (106) and a plurality of annular passageways (104) formed in the support arms for receiving respective arm portions (108) of the fluid segment portion from the radial passageway and for conducting the respective arm portions into corresponding annular spaces (47) formed between the tubes retained by the disk.

  16. Supportive housing in Brooklyn.

    PubMed

    Burke, Natasha

    2005-01-01

    Since 1977, Saint Vincent Catholic Medical Centers of New York City has been creating and maintaining supportive housing offerings for at-risk populations, such as individuals with HIV/AIDS, those with substance abuse challenges, and the mentally ill. By providing a continuum of medical and social services, the organization aims to help residents stabilize and rebuild their lives. Saint Vincent sees empowerment as a key step toward helping individuals maintain their health, re-enter the community, seek employment, and pursue other goals. Some of the supportive services Saint Vincent offers in its housing communities are care coordination, counseling, peer support networks, self-help groups, leisure activities, help with finances, and referrals to community agencies offering other resources. Recognizing the importance of job training and assistance, the system also offers a unique program in which mentally ill individuals are able to work in a recycling center or office cleaning business, both of which are owned by Saint Vincent. PMID:15807066

  17. Group Support Systems (GSS)

    NASA Technical Reports Server (NTRS)

    Hamel, Gary P.; Wijesinghe, R.

    1996-01-01

    Groupware is a term describing an emerging computer software technology enhancing the ability of people to work together as a group, (a software driven 'group support system'). This project originated at the beginning of 1992 and reports were issued describing the activity through May 1995. These reports stressed the need for process as well as technology. That is, while the technology represented a computer assisted method for groups to work together, the Group Support System (GSS) technology als required an understanding of the facilitation process electronic meetings demand. Even people trained in traditional facilitation techniques did not necessarily aimlessly adopt groupware techniques. The latest phase of this activity attempted to (1) improve the facilitation process by developing training support for a portable groupware computer system, and (2) to explore settings and uses for the portable groupware system using different software, such as Lotus Notes.

  18. Advanced life support study

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Summary reports on each of the eight tasks undertaken by this contract are given. Discussed here is an evaluation of a Closed Ecological Life Support System (CELSS), including modeling and analysis of Physical/Chemical Closed Loop Life Support (P/C CLLS); the Environmental Control and Life Support Systems (ECLSS) evolution - Intermodule Ventilation study; advanced technologies interface requirements relative to ECLSS; an ECLSS resupply analysis; the ECLSS module addition relocation systems engineering analysis; an ECLSS cost/benefit analysis to identify rack-level interface requirements of the alternate technologies evaluated in the ventilation study, with a comparison of these with the rack level interface requirements for the baseline technologies; advanced instrumentation - technology database enhancement; and a clean room survey and assessment of various ECLSS evaluation options for different growth scenarios.

  19. Crank shaft support assembly

    DOEpatents

    Natkin, Robert J.; Oltmans, Bret; Allison, John E.; Heater, Thomas J.; Hines, Joy Adair; Tappen, Grant K.; Peiskammer, Dietmar

    2007-10-23

    A crank shaft support assembly for increasing stiffness and reducing thermal mismatch distortion in a crank shaft bore of an engine comprising different materials. A cylinder block comprises a first material and at least two crank journal inserts are insert-molded into respective crank journal regions of the cylinder block and comprise a second material having greater stiffness and a lower thermal coefficient of expansion that the first material. At least two bearing caps are bolted to the respective crank journal inserts and define, along with the crank journal inserts, at least two crank shaft support rings defining a crank shaft bore coaxially aligned with a crank shaft axis. The bearing caps comprise a material having higher stiffness and a lower thermal coefficient of expansion than the first material and are supported on the respective crank journal inserts independently of any direct connection to the cylinder block.

  20. Advanced Life Support Systems

    NASA Technical Reports Server (NTRS)

    Barta, Daniel J.

    2004-01-01

    This presentation is planned to be a 10-15 minute "catalytic" focused presentation to be scheduled during one of the working sessions at the TIM. This presentation will focus on Advanced Life Support technologies key to future human Space Exploration as outlined in the Vision, and will include basic requirements, assessment of the state-of-the-art and gaps, and include specific technology metrics. The presentation will be technical in character, lean heavily on data in published ALS documents (such as the Baseline Values and Assumptions Document) but not provide specific technical details or build to information on any technology mentioned (thus the presentation will be benign from an export control and a new technology perspective). The topics presented will be focused on the following elements of Advanced Life Support: air revitalization, water recovery, waste management, thermal control, habitation systems, food systems and bioregenerative life support.

  1. Linux support at Fermilab

    SciTech Connect

    D.R. Yocum, C. Sieh, D. Skow, S. Kovich, D. Holmgren and R. Kennedy

    1998-12-01

    In January of 1998 Fermilab issued an official statement of support of the Linux operating system. This was the result of a ground swell of interest in the possibilities of a cheap, easily used platform for computation and analysis culminating with the successful demonstration of a small computation farm as reported at CHEP97. This paper will describe the current status of Linux support and deployment at Fermilab. The collaborative development process for Linux creates some problems with traditional support models. A primary example of this is that there is no definite OS distribution ala a CD distribution from a traditional Unix vendor. Fermilab has had to make a more definite statement about what is meant by Linux for this reason. Linux support at Fermilab is restricted to the Intel processor platform. A central distribution system has been created to mitigate problems with multiple distribution and configuration options. This system is based on the Red Hat distribution with the Fermi Unix Environment (FUE) layered above it. Deployment of Linux at the lab has been rapidly growing and by CHEP there are expected to be hundreds of machines running Linux. These include computational farms, trigger processing farms, and desktop workstations. The former groups are described in other talks and consist of clusters of many tens of very similar machines devoted to a few tasks. The latter group is more diverse and challenging. The user community has been very supportive and active in defining needs for Linux features and solving various compatibility issues. We will discuss the support arrangements currently in place.

  2. Experiment support system

    NASA Technical Reports Server (NTRS)

    Shannon, A. V.

    1977-01-01

    The Experiment Support System is a switchboard system with displays and controls. It routes electrical power to experiments M092, M093, and M171 equipment; gaseous nitrogen to the Blood Pressure Measurement System; receives biomedical data from all related equipment; routes the conditioned data signals to the Airlock Module Telemetry System and also displays (in digital or analog from) portions of that data which the crewmen must see to complete the experiment successfully. The Experiment Support System is interfaced to the M131 control panel to transfer conditioned data to the Airlock Module Telemetry System.

  3. Aerogel-supported filament

    DOEpatents

    Wuest, C.R.; Tillotson, T.M.; Johnson, C.V. III

    1995-05-16

    The present invention is a thin filament embedded in a low density aerogel for use in radiation detection instruments and incandescent lamps. The aerogel provides a supportive matrix that is thermally and electrically nonconductive, mechanically strong, highly porous, gas-permeable, and transparent to ionizing radiation over short distances. A low density, open-cell aerogel is cast around a fine filament or wire, which allows the wire to be positioned with little or no tension and keeps the wire in place in the event of breakage. The aerogel support reduces the stresses on the wire caused by vibrational, gravitational, electrical, and mechanical forces. 6 Figs.

  4. Aerospace structures supportability

    NASA Astrophysics Data System (ADS)

    Smith, Howard Wesley

    1989-04-01

    This paper is about supportability in its general sense, with emphasis on aerospace structures. Reliability and maintainability (R&M) are described and defined from the standpoint of both structural analysis. Accessability, inspectability, and replaceability are described as design attributes. Reliability and probability of failure are shown to be in the domain of the analysis. Availability and replaceability are traditional logistic responsibilities which are influenced by supportability engineers. The USAF R&M 2000 process is described, and the R&M 1988 Workshop at Wright-Patterson Air Force Base is also included in the description.

  5. Supported liquid membranes

    SciTech Connect

    Danesi, P.R.

    1984-01-01

    The possibility of utilizing thin layers of organic solutions of solvent extraction reagents, immobilized on microporous inert supports interposed between two aqueous solutions, for selectively removing metal ions from a mixture represents an attractive alternative to liquid-liquid extraction. A detailed knowledge of the liquid-liquid extraction equilibria and mass transfer kinetics is required to understand and to describe quantitatively the rate laws which control the permeation of metal species through Supported Liquid Membranes (SLM) and to exploit them for separation processes. This paper attempts to understand the mechanism of transport through SLM.

  6. Aerogel-supported filament

    DOEpatents

    Wuest, Craig R.; Tillotson, Thomas M.; Johnson, III, Coleman V.

    1995-01-01

    The present invention is a thin filament embedded in a low density aerogel for use in radiation detection instruments and incandescent lamps. The aerogel provides a supportive matrix that is thermally and electrically nonconductive, mechanically strong, highly porous, gas-permeable, and transparent to ionizing radiation over short distances. A low density, open-cell aerogel is cast around a fine filament or wire, which allows the wire to be positioned with little or no tension and keeps the wire in place in the event of breakage. The aerogel support reduces the stresses on the wire caused by vibrational, gravitational, electrical, and mechanical forces.

  7. Dental Support Organizations.

    PubMed

    Dufurrena, Quinn

    2015-01-01

    The Association of Dental Support Organizations is a recently formed association of 33 companies representing a range of management and support services for dental practices. These organizations do not engage in the practice of dentistry, although in some cases they operate as holding companies for practices that do, thus separating the legal responsibility of providing treatment from the management and flow of funds. This report summarizes some of the recent trends in oral health care and dentists' practice patterns that are prompting the increased prevalence of this model. The general functioning of the DSO model is described, including some common variations, and the core values of ADSO are featured. PMID:26455048

  8. Support for comprehensive reuse

    NASA Technical Reports Server (NTRS)

    Basili, V. R.; Rombach, H. D.

    1991-01-01

    Reuse of products, processes, and other knowledge will be the key to enable the software industry to achieve the dramatic improvement in productivity and quality required to satisfy the anticipated growing demands. Although experience shows that certain kinds of reuse can be successful, general success has been elusive. A software life-cycle technology which allows comprehensive reuse of all kinds of software-related experience could provide the means to achieving the desired order-of-magnitude improvements. A comprehensive framework of models, model-based characterization schemes, and support mechanisms for better understanding, evaluating, planning, and supporting all aspects of reuse are introduced.

  9. Bioregenerative life support

    NASA Technical Reports Server (NTRS)

    Taylor, Bill

    1990-01-01

    Bioregenerative life support systems utilize plant growth for food, water, and atmosphere revitalization. Simulation studies of a simplified model are presented that suggest survivability in the face of partial plant growth chamber failure. Simulation studies demonstrate the potential for a bioregenerative life support system on an extended mission. In addition to robustness and survivability in terms of the food supply, the plant growth chamber produces exactly the right amount of oxygen for the crew's metabolic needs. The amount of water taken up by the plants during food production is balanced by the crew's metabolic water production.

  10. Starship Life Support

    NASA Technical Reports Server (NTRS)

    Jones, Harry W.

    2009-01-01

    The design and mass cost of a starship and its life support system are investigated. The mission plan for a multi generational interstellar voyage to colonize a new planet is used to describe the starship design, including the crew habitat, accommodations, and life support. Only current technology is assumed. Highly reliable life support systems can be provided with reasonably small additional mass, suggesting that they can support long duration missions. Bioregenerative life support, growing crop plants that provide food, water, and oxygen, has been thought to need less mass than providing stored food for long duration missions. The large initial mass of hydroponics systems is paid for over time by saving the mass of stored food. However, the yearly logistics mass required to support a bioregenerative system exceeds the mass of food solids it produces, so that supplying stored dehydrated food always requires less mass than bioregenerative food production. A mixed system that grows about half the food and supplies the other half dehydrated has advantages that allow it to breakeven with stored dehydrated food in about 66 years. However, moderate increases in the hydroponics system mass to achieve high reliability, such as adding spares that double the system mass and replacing the initial system every 100 years, increase the mass cost of bioregenerative life support. In this case, the high reliability half food growing, half food supplying system does not breakeven for 389 years. An even higher reliability half and half system, with three times original system mass and replacing the system every 50 years, never breaks even. Growing food for starship life support requires more mass than providing dehydrated food, even for multigeneration voyages of hundreds of years. The benefits of growing some food may justify the added mass cost. Much more efficient recycling food production is wanted but may not be possible. A single multigenerational interstellar voyage to

  11. Space support forum

    NASA Technical Reports Server (NTRS)

    Posvar, Wesley W.; Laidlaw, Donald A.; Brown, Robert; King, Douglas; Graham, Daniel O.; Strine, Linda; Hopkins, Mark; Mcnair, Carl

    1992-01-01

    This is a report of the discussions held by the Space Support Forum on the subject of education as an investment in the future. The Space Support Forum is a gathering of representatives of various space-related organizations that interact or overlap with the mission of the Space Foundation. They reported that an international science assessment in 17 countries ranked the United States either near or at the bottom in biology, chemistry, and physics. The U.S. Department of Education has laid out 6 National Education Goals to turn this status around and is helping hundreds of communities to work towards these goals, referred to as America 2000.

  12. Rhode Island Model Evaluation & Support System: Support Professional. Edition II

    ERIC Educational Resources Information Center

    Rhode Island Department of Education, 2015

    2015-01-01

    Rhode Island educators believe that implementing a fair, accurate, and meaningful evaluation and support system for support professionals will help improve student outcomes. The primary purpose of the Rhode Island Model Support Professional Evaluation and Support System (Rhode Island Model) is to help all support professionals do their best work…

  13. Design of supports in mines

    SciTech Connect

    Biroen, C.; Arioglu, E.

    1983-01-01

    Much information is available on rock mechanics and some on mine supports but a need has been identified in the area of design and calculation of the actual dimensions of mining supports. A variety of roof support systems are described. Information is included on wooden supports, steel gallery supports, roof bolts and trusses, steel longwall supports, and concrete supports. A chapter is also included on stowing or filling the openings made by extraction of the seams of mineral deposits.

  14. Schoolwide Positive Behavior Supports

    ERIC Educational Resources Information Center

    Flannery, K. Brigid; Guest, Elise M.; Horner, Robert H.

    2010-01-01

    Schools are complex communities that play a major role in the social fabric of culture. Effective schools provide access to both good instruction and a social culture that supports engagement, community, and success. Over the past 10 years, more than 11,000 elementary, middle level, and high schools have adopted schoolwide positive behavior…

  15. Supporting Our Artistically Talented

    ERIC Educational Resources Information Center

    Dupuis, Diane L.

    2004-01-01

    A talented child's motivation and artistic gift can suffer when the environment at home and at school are inadequately supportive. It's crucial, therefore, for parents and teachers to understand that any child's involvement in the arts can enhance overall success in academics and in later life. It's just as important to learn about the many ways…

  16. Supportive and Rehabilitative Programs.

    ERIC Educational Resources Information Center

    American Annals of the Deaf, 1999

    1999-01-01

    This directory lists supportive and rehabilitative programs for the deaf. Listed separately are federal programs, state vocational rehabilitation offices, regional and local programs, national professional organizations and centers, state chapters of the National Association of the Deaf, and committee members (Conference of Educational…

  17. Supportive and Rehabilitative Programs.

    ERIC Educational Resources Information Center

    American Annals of the Deaf, 1998

    1998-01-01

    This directory of supportive and rehabilitative programs for the deaf lists federal programs, state vocational-rehabiltation offices, regional and local programs, national professional organizations and centers, state contacts for the National Association of the Deaf, and professional committee members of the Conference of Educational…

  18. Supporting Music Teacher Mentors

    ERIC Educational Resources Information Center

    Zaffini, Erin Dineen

    2015-01-01

    While much discussion and research is focused on the importance of music teacher mentors for preservice teachers and novice in-service music educators, little discussion has been devoted to the topic of how we, as members of the music education profession, can support the role of music teacher mentors. This article explores some of the benefits…

  19. Does Supported Employment Work?

    ERIC Educational Resources Information Center

    Morgan McInnes, Melayne; Ozturk, Orgul Demet; McDermott, Suzanne; Mann, Joshua R.

    2010-01-01

    Providing employment-related services, including supported employment through job coaches, has been a priority in federal policy since the enactment of the Developmental Disabilities Assistance and Bill of Rights Act in 1984. We take advantage of a unique panel data set of all clients served by the South Carolina Department of Disabilities and…

  20. Advanced Cardiac Life Support.

    ERIC Educational Resources Information Center

    Kirkwood Community Coll., Cedar Rapids, IA.

    This document contains materials for an advanced college course in cardiac life support developed for the State of Iowa. The course syllabus lists the course title, hours, number, description, prerequisites, learning activities, instructional units, required text, six references, evaluation criteria, course objectives by units, course…

  1. Valuing Support Groups

    ERIC Educational Resources Information Center

    Graziosi, Elena

    2010-01-01

    For people living with or caring for someone with a disability, being able to talk to someone who can relate to their feelings of frustration during difficult times, offer practical advice on an issue, or even understand the importance of a small success, can make a difference. Support groups are a mainstay for individuals coping with daily…

  2. Support vector machines

    NASA Technical Reports Server (NTRS)

    Garay, Michael J.; Mazzoni, Dominic; Davies, Roger; Wagstaff, Kiri

    2004-01-01

    Support Vector Machines (SVMs) are a type of supervised learning algorith,, other examples of which are Artificial Neural Networks (ANNs), Decision Trees, and Naive Bayesian Classifiers. Supervised learning algorithms are used to classify objects labled by a 'supervisor' - typically a human 'expert.'.

  3. Computer Support Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This publication contains 18 subjects appropriate for use in a competency list for the occupation of computer support technician, 1 of 12 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 18 units are as…

  4. Information Support Specialist.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This publication contains 22 subjects appropriate for use in a competency list for the occupation of information support specialist, 1 of occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 22 units are as…

  5. Support Principals, Transform Schools

    ERIC Educational Resources Information Center

    Aguilar, Elena; Goldwasser, Davina; Tank-Crestetto, Kristina

    2011-01-01

    The Transformational Coaching Team in Oakland Unified School District provides differentiated, sustained, job-embedded support to the district's school leaders. In this article, members of the team describe how they work with principals to transform the culture of schools. Student achievement data show above-average improvement in schools in which…

  6. Reconceptualizing Academic Support

    ERIC Educational Resources Information Center

    Vantine, Laura

    2016-01-01

    Over the past 30 years, more and more independent schools have established academic support programs and learning centers to address their students' individual learning needs. Perhaps not surprisingly, as the number of students being evaluated has increased, even more families have requested academic accommodations and services for their children.…

  7. Biological Life Support Systems

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Session MP2 includes short reports on: (1) Crew Regenerative Life Support in Long Duration Space Missions; (2) Bioconversion Systems for Food and Water on Long Term Space Missions; (3) Novel Laboratory Approaches to Multi-purpose Aquatic Biogenerative Closed-Loop Food Production Systems; and (4) Artificial Neural Network Derived Plant Growth Models.

  8. Synchronized time stamp support

    SciTech Connect

    Kowalkowski, J.

    1994-02-16

    New software has been added to IOC core to maintain time stamps. The new software has the ability to maintain time stamps over all IOCs on a network. The purpose of this paper is to explain how EPICS will synchronize the time stamps. In addition, this paper will explain how to configure and use the new EPICS time stamp support software.

  9. Supporting Learners in Training.

    ERIC Educational Resources Information Center

    Montague, Ann; Hopkins, Linda

    A project was conducted in Australia to investigate the most effective ways whereby learners receive informal and formal support to assist them to successfully complete vocational education and training (VET), either in school or in business job-training programs. Data were collected through a literature review, a case study of 11 organizations,…

  10. Standards Supporters Firing Back

    ERIC Educational Resources Information Center

    Ujifusa, Andrew

    2013-01-01

    Supporters of the Common Core State Standards are moving to confront increasingly high-profile opposition to the standards at the state and national levels by rallying the private sector and initiating coordinated public relations and advertising campaigns as schools continue implementation. In states such as Michigan and Tennessee, where…

  11. The Supportive Chair.

    ERIC Educational Resources Information Center

    Rosbottom, Ronald C.

    1987-01-01

    Recommendations for chairs of college-level foreign language departments include: being supportive of the department; communicating fully and openly with faculty and staff; promoting grantsmanship; and encouraging staff and faculty. Recommendations for deans working with chairs and department heads include: consulting frequently and communicating…

  12. Supporting Beginning Science Teachers

    ERIC Educational Resources Information Center

    Luft, Julie A.; Bang, EunJin; Roehrig, Gillian H.

    2007-01-01

    The focus of this article is the more immediate way to help new science teachers, which comes from the experienced and professionally active teacher--you! As science teacher educators who work with and study the development of beginning teachers, the authors found the support offered knowingly and unknowingly by the teacher next door was a…

  13. Supportive and Rehabilitative Programs.

    ERIC Educational Resources Information Center

    American Annals of the Deaf, 2001

    2001-01-01

    This directory provides information on a variety of supportive and rehabilitative programs for people with deafness and hearing impairment. Listed are federal programs, state vocational rehabilitation offices, and regional and local programs. Also provided is a list of national professional organizations and centers, contacts for the National…

  14. Building Community Support.

    ERIC Educational Resources Information Center

    Connors, Lori; And Others

    This handbook is intended to help local programs build a broad base of support for young children and their families. The strategies described are designed to help early childhood practitioners develop relationships with the community that will establish long-term commitments to early childhood programs and build a foundation for additional…

  15. Tool Support Ring

    NASA Technical Reports Server (NTRS)

    Smith, D. F.

    1984-01-01

    Tool support ring requires only single repositioning to give broaching tool access to series of 66 holes located on circle. Permits use of tools designed for hand-held use (such as electric drill) where less portable setup (such as milling machine) otherwise required.

  16. Supporting Family Choice

    ERIC Educational Resources Information Center

    Murray, Mary M.; Christensen, Kimberly A.; Umbarger, Gardner T.; Rade, Karin C.; Aldridge, Kathryn; Niemeyer, Judith A.

    2007-01-01

    Supporting family choice in the decision-making process is recommended practice in the field of early childhood and early childhood special education. These decisions may relate to the medical, educational, social, recreational, therapeutic/rehabilitative, and community aspects of the child's disability. Although this practice conveys the message…

  17. Supporting Change in Schools.

    ERIC Educational Resources Information Center

    Holst, Jesper

    1997-01-01

    Examines issues in trends toward more inclusive education for children with disabilities in the United Kingdom. Examples from Denmark and a Danish assistance project in Mongolia are used to identify successful strategies for change which rely on professional and economic support (from both central and local governments) and the backing of parents…

  18. HOMELAND SECURITY SUPPORT

    EPA Science Inventory

    The goal of this Task is twofold. The first goal is to improve our atmospheric modeling support in the event of a national emergency, and the second goal is to improve our understanding of atmospheric processes important in urban dispersion and response applications.

  19. COMMUNITY SUPPORTED AGRICULTURE

    EPA Science Inventory

    NRMRL employees at the Air Pollution Prevention and Control Division in Research Triangle Park, North Carolina, are sharing in a unique community agriculture program that supports EPA environmental goals?off the job as well as on. Every Wednesday afternoon, bags of farm-fresh org...

  20. Supporting Family Caregivers.

    PubMed

    Ewing, Joshua

    2015-03-01

    (1) About 8,000 baby boomers reach age 65 every day. (2) Nearly 70 percent of people over age 65 will need some form of long-term services and supports in their lives. (3) AARP estimates the value of uncompensated care provided by family caregivers to be more than $450 billion annually. PMID:26173298

  1. Untapped Reservoir of Support.

    ERIC Educational Resources Information Center

    Kopecek, Robert J.; Kubik, Susan

    1979-01-01

    Assesses the potential power of an active community college alumni association in political situations, in student recruitment, and on advisory committees. Advocates inclusive membership; discusses yearly membership fees v financial support by the college; stresses the importance of making college services available to members and of providing…

  2. SUPPORT FOR BEIR VII

    EPA Science Inventory

    The office is supporting the continued funding of National Academy of Sciences Study to update our understanding of the effects of low-level radiation. In particular, this study, entitled the Biological Effects of Ionizing Radiation VII, will draw upon the most recent data avail...

  3. Program Supports Scientific Visualization

    NASA Technical Reports Server (NTRS)

    Keith, Stephan

    1994-01-01

    Primary purpose of General Visualization System (GVS) computer program is to support scientific visualization of data generated by panel-method computer program PMARC_12 (inventory number ARC-13362) on Silicon Graphics Iris workstation. Enables user to view PMARC geometries and wakes as wire frames or as light shaded objects. GVS is written in C language.

  4. Signatures support program

    NASA Astrophysics Data System (ADS)

    Hawley, Chadwick T.

    2009-05-01

    The Signatures Support Program (SSP) leverages the full spectrum of signature-related activities (collections, processing, development, storage, maintenance, and dissemination) within the Department of Defense (DOD), the intelligence community (IC), other Federal agencies, and civil institutions. The Enterprise encompasses acoustic, seismic, radio frequency, infrared, radar, nuclear radiation, and electro-optical signatures. The SSP serves the war fighter, the IC, and civil institutions by supporting military operations, intelligence operations, homeland defense, disaster relief, acquisitions, and research and development. Data centers host and maintain signature holdings, collectively forming the national signatures pool. The geographically distributed organizations are the authoritative sources and repositories for signature data; the centers are responsible for data content and quality. The SSP proactively engages DOD, IC, other Federal entities, academia, and industry to locate signatures for inclusion in the distributed national signatures pool and provides world-wide 24/7 access via the SSP application.

  5. Motorized support jack

    DOEpatents

    Haney, Steven J.; Herron, Donald Joe

    2003-05-13

    A compact, vacuum compatible motorized jack for supporting heavy loads and adjusting their positions is provided. The motorized jack includes: (a) a housing having a base; (b) a first roller device that provides a first slidable surface and that is secured to the base; (c) a second roller device that provides a second slidable surface and that has an upper surface; (d) a wedge that is slidably positioned between the first roller device and the second roller device so that the wedge is in contact with the first slidable surface and the second slidable surface; (e) a motor; and (d) a drive mechanism that connects the motor and the wedge to cause the motor to controllably move the wedge forwards or backwards. Individual motorized jacks can support and lift of an object at an angle. Two or more motorized jacks can provide tip, tilt and vertical position adjustment capabilities.

  6. Motorized support jack

    DOEpatents

    Haney, Steven J.; Herron, Donald Joe

    2001-01-01

    A compact, vacuum compatible motorized jack for supporting heavy loads and adjusting their positions is provided. The motorized jack includes: (a) a housing having a base; (b) a first roller device that provides a first slidable surface and that is secured to the base; (c) a second roller device that provides a second slidable surface and that has an upper surface; (d) a wedge that is slidably positioned between the first roller device and the second roller device so that the wedge is in contact with the first slidable surface and the second slidable surface; (e) a motor; and (d) a drive mechanism that connects the motor and the wedge to cause the motor to controllably move the wedge forwards or backwards. Individual motorized jacks can support and lift of an object at an angle. Two or more motorized jacks can provide tip, tilt and vertical position adjustment capabilities.

  7. Basic trauma life support.

    PubMed

    Werman, H A; Nelson, R N; Campbell, J E; Fowler, R L; Gandy, P

    1987-11-01

    The impact of traumatic injuries on modern society in terms of morbidity, mortality, and economic cost is enormous. Studies have shown that both advanced life support skills and rapid stabilization and transport of the trauma victim have a beneficial effect on the patient's ultimate outcome. The Basic Trauma Life Support (BTLS) course was designed to provide pre-hospital care providers with the skills necessary to provide a thorough assessment, initial resuscitation, and rapid transportation of the trauma victim. Early studies suggest that the material is easily learned by prehospital care providers and that the on-scene time for trauma cases is reduced following training in BTLS. More widespread training in BTLS may have a significant effect on the mortality and morbidity associated with traumatic injuries. PMID:3662184

  8. Packaging for logistical support

    NASA Astrophysics Data System (ADS)

    Twede, Diana; Hughes, Harold

    Logistical packaging is conducted to furnish protection, utility, and communication for elements of a logistical system. Once the functional requirements of space logistical support packaging have been identified, decision-makers have a reasonable basis on which to compare package alternatives. Flexible packages may be found, for example, to provide adequate protection and superior utility to that of rigid packages requiring greater storage and postuse waste volumes.

  9. Thanks for Your Support

    ERIC Educational Resources Information Center

    Macken, Carol

    2005-01-01

    It is not uncommon for a teacher who has returned from a workshop eager to try new ideas to find out weeks later that he or she has stymied again. As such, a support system is needed by teachers to apply and continue what they had learned from a workshop. Caldwell/West Caldwell Language Arts Network in New Jersey, of which the author is a member,…

  10. Integrated support structure

    NASA Technical Reports Server (NTRS)

    Bruneau, Stephen D.; Campbell, John T.; Struven, Christopher A.

    1990-01-01

    This Major Qualifying Project is part of the Advanced Space Design Program at WPI. The goal is to design a support structure for a NASA GetAway Special experimental canister. The payload integration, weight, volume, and structural integrity of the canister as specified by NASA guidelines were studied. The end result is a complete set of design drawings with interface drawings and data to specify the design and leave a base on which the next group can concentrate.

  11. SAS Attitude Support System

    NASA Technical Reports Server (NTRS)

    Snyder, J. L.; Meyers, G. F.

    1972-01-01

    A unique ground control system was designed and implemented to support and meet the stringent mission requirements of the SAS-1. The important features of the system are described with emphasis on the software used to control the orientation of the spacecraft. A summary of the system's operation during the SAS-1 mission is given along with a discussion of the performance of the software subsystems relative to the mission requirements.

  12. Magnetic record support

    NASA Technical Reports Server (NTRS)

    Nakayama, M.; Morita, H.; Tokuoka, Y.; Izumi, T.; Fukuda, K.; Kubota, Y.

    1984-01-01

    The magnetic layer of a magnetic record support is coated with a thin film of a polymer with a siloxane bond. The magnetic layer consists of a thin film obtained by vacuum metallization, cathode sputtering or dispersion of a ferromagnetic metal powder in a binder. The polymer with a siloxane bond is produced by the polymerization of an organic silicon compound which inherently contains or is able to form this bond. Polymerization is preferably performed by plasma polymerization.

  13. Obstetric life support.

    PubMed

    Puck, Andrea Lorraine; Oakeson, Ann Marie; Morales-Clark, Ana; Druzin, Maurice

    2012-01-01

    The death of a woman during pregnancy is devastating. Although the incidence of maternal cardiac arrest is increasing, it continues to be a comparatively rare event. Obstetric healthcare providers may go through their entire career without participating in a maternal cardiac resuscitation. Concern has been raised that when an arrest does occur in the obstetric unit, providers who are trained in life support skills at 2-year intervals are ill equipped to provide the best possible care. The quality of resuscitation skills provided during cardiopulmonary arrest of inpatients often may be poor, and knowledge of critical steps to be followed during resuscitation may not be retained after life support training. The Obstetric Life Support (ObLS) training program is a method of obstetric nursing and medical staff training that is relevant, comprehensive, and cost-effective. It takes into consideration both the care needs of the obstetric patient and the adult learning needs of providers. The ObLS program brings obstetric nurses, obstetricians, and anesthesiologists together in multidisciplinary team training that is crucial to developing efficient emergency response. PMID:22551860

  14. Wellhead equipment support

    SciTech Connect

    Nichols, R.P.

    1987-03-24

    A wellhead assembly is described for supporting equipment in a well, comprising: a suspension nut having a threaded outer surface; a wellhead member having an inner threaded surface adapted to mesh with the threaded outer surface of the suspension nut; the suspension nut having a projection extending axially from its threaded outer surface and having an inner surface adapted to support equipment in the well; at least a portion of the inner surface for supporting the equipment facing both inwardly and upwardly such that force exerted by the weight of the equipment against the inner surface is transformed at least in part to a radially outwardly directed force; the projecting having an outer surface sized such that the outer surface is spaced from an inner surface of the wellhead member in the absence of force exerted against the inner surface of the projection such that the projection is deflected outwardly by the force exerted by the weight of the equipment against the inner surface.

  15. Supported membrane nanodevices.

    PubMed

    Anrather, Dorothea; Smetazko, Michaela; Saba, Miriam; Alguel, Yilmaz; Schalkhammer, Thomas

    2004-01-01

    Supported membrane nanodevices are based on natural or artificial ion channels embedded in a lipid membrane deposited on a chip wafer. Membrane conductance is modulated by biorecognitive events, with the use of intrinsic binding sites of the ion channel or via artificial sites fused to the channel protein. Artificial ion gates are constructed by coupling a specific ligand for the analyte near the channel entrance or a site important to triggering channel conformation. The binding event leads to the closure of the ion channel or induces a conformational change of the channel, reducing the ion flux. The signal transduced from the device is the decrease in the ion flux-induced electron current at a silver-silver chloride electrode at ultimate single-molecule sensitivity. Among the natural ion channels, gramicidin A, a transport antibiotic, was found to be most suitable, and thus was used by AMBRI, Australia, to set up prototypes of membrane biochips, using self-association of the dimer. Covalent dimerization-based devices, developed by the Vienna group, make use of the down-regulation of the permanently open membrane-spanning bisgramicidine ion channel. The reactive group at the C-terminus, a hydroxy group, allows precise coupling of the analyte-binding moiety in gramicidin as well as bisgramicidin. The device is set up with bilayer membranes deposited on apertures of a hydrophobic frame structure produced via microlithography, facing an aqueous or hydro-gel micro-environment on both sides, constructing black lipid membranes or patch-clamp devices "on chip." The setup of the device needs gel membrane supports that allow membrane formation and contribute to the stability of the bilayer by exposure of functional groups that promote electrostatic interaction and formation of hydrogen bridges and enable the introduction of covalent spacers and anchors. Photo-cross-linked polyvinylpyrrolidone and polyacrylamide, electropolymerized polydiaminobenzene and coated agarose, as

  16. Educators Supporting Educators: A Guide to Organizing School Support Teams.

    ERIC Educational Resources Information Center

    Ginsberg, Margery B.; Johnson, Joseph F., Jr.; Moffett, Ceryelle A.

    This book is a resource for educators in any setting who are trying to implement school support teams. New legislation requires states to establish systems of intensive and sustained support for schools that receive Title I funds. School support teams are to become the primary component of these systems. These support teams, external groups of…

  17. Photovoltaics support distribution feeder

    SciTech Connect

    Barker, P.P.; Bailey, B.; Peterson, A.J. Jr.

    1997-03-01

    The concept of supporting the transmission and distribution (T&D) system with a photovoltaic (PV) distributed energy source has gained increasing attention as the cost of PV energy has declined. Locating a PV system at a strategic point on the distribution feeder can enhance the overall T&D system performance and provide a source of renewable power generation. In such applications, the PV system peak output ranges from a few percent up to about 20 percent of the peak feeder load. A good example of one such project on a line supplied by the Pacific Gas & Electric Co.`s Kerman Substation near Fresno, California. Given the success of this and other projects, Niagara Mohawk Power Corp. (NMPC) will be testing a 100 kW ac output system interconnected with a 13.2 kV distribution feeder to demonstrate PV T&D support concepts in its service territory. The demonstration system construction and operation is to be funded by NMPC, Utility Photovoltaics Group (UPVG) and New York State Energy Research and Development Authority (NYSERDA). AWS Scientific will manage the site construction and be responsible for maintaining, operating and monitoring the performance of the system. As a prerequisite to construction of the system, the NMPC research and development department funded AWS Scientific Inc. (Albany, N.Y.) and Power Technologies Inc. (Schenectady, N.Y.) to investigate the use of PV energy for T&D support applications on its system. The study involved reviewing a large number of distribution circuits throughout NMPC`s service territory to find candidate locations for the 100 kW demonstration project. A key focus of the study was to find a feeder whereby the injection of PV energy provided maximum dispersed generation benefits.

  18. Stennis supports LCROSS sessions

    NASA Technical Reports Server (NTRS)

    2009-01-01

    Stennis Space Center personnel supported a pair of events marking NASA's Lunar CRater Observation and Sensing Satellite (LCROSS) mission Oct. 9. Stennis participated in daylong activities at the Russell C. Davis Planetarium in Jackson, Miss., and the Kenner (La.) Planetarium Megadome Cinema, providing exhibits, videos and educational activities for students at both sites. The LCROSS mission involved crashing two objects into the moon in order to search for evidence of lunar water ice, an important resource for future sustainable exploration. Pictured at the Kenner planetarium are students from Emily C. Watkins and St. John the Baptist Parish schools at Kenner.

  19. Environmental analysis support

    SciTech Connect

    Miller, R.L.

    1996-06-01

    Activities in environmental analysis support included assistance to the Morgantown and Pittsburgh Energy Technology Centers (METC and PETC) in reviewing and preparing documents required by the National Environmental Policy Act (NEPA) for projects selected for the Clean Coal Technology (CCT) Program. An important activity was the preparation for METC of a final Environmental Assessment (EA) for the proposed Externally Fired Combined Cycle (EFCC) Project in Warren, Pennsylvania. In addition, a post-project environmental analysis was prepared for PETC to evaluate the Demonstration of Advanced Combustion Techniques for a Tangentially-Fired Boiler in Lynn Haven, Florida.

  20. FUEL ELEMENT SUPPORT

    DOEpatents

    Wyman, W.L.

    1961-06-27

    The described cylindrical fuel element has longitudinally spaced sets of short longitudinal ribs circumferentially spaced from one another. The ribs support the fuel element in a coolant tube so that there is an annular space for coolant flow between the fuel element and the interior of the coolant tube. If the fuel element grows as a result of reactor operation, the circumferential distribution of the ribs maintains the uniformity of the annular space between the coolant tube and the fuel element, and the collapsibility of the ribs prevents the fuel element from becoming jammed in the coolant tube.

  1. Cryogenic support member

    DOEpatents

    Niemann, Ralph C.; Gonczy, John D.; Nicol, Thomas H.

    1987-01-01

    A cryogenic support member is comprised of a non-metallic rod having a depression in at least one end and a metallic end connection assembled to the rod. The metallic end connection comprises a metallic plug which conforms to the shape and is disposed in the depression and a metallic sleeve is disposed over the rod and plug. The plug and the sleeve are shrink-fitted to the depression in the rod to form a connection good in compression, tension and bending.

  2. Shuttle autoland support program

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The results of the space shuttle automatic landing support program studies performed from November 1, 1975 to March 31, 1976 were summarized. The following subjects were discussed: (1) software definition review (TAEM pre-final and Autoland only), (2) software definition review (KPIT scheduling), (3) deletion of air data, (4) June 1975 aero data update and check runs, (5) flat turn study, (6) guidance mode switching study, (7) flat turn study-additional data, (8) trajectory shaping study, (9) aero data tolerances, and (10) turbulence model study.

  3. Supporting undergraduate biomedical entrepreneurship.

    PubMed

    Patterson, P E

    2004-01-01

    As biomedical innovations become more sophisticated and expensive to bring to market, an approach is needed to ensure the survival of the best ideas. The tactic used by Iowa State University to provide entrepreneurship opportunities for undergraduate students in biomedical areas is a model that has proven to be both distinctive and effective. Iowa State supports and fosters undergraduate student entrepreneurship efforts through the Pappajohn Center for Entrepreneurship. This unique partnership encourages ISU faculty, researchers, and students to become involved in the world of entrepreneurship, while allowing Iowa's business communities to gain access to a wide array of available resources, skills, and information from Iowa State University. PMID:15134007

  4. Supporters of sperm

    PubMed Central

    Løvlie, Hanne

    2014-01-01

    The Biology of Spermatozoa (BoS) meetings have run on a biannual basis since the early 1990s. They are dedicated to the fascinating research topic of sperm and their complicated route to fertilization. The BoS meetings focus on sperm, but they also explore additional supporting factors important in fertilization, such as those present in seminal and ovarian fluid, as well as the genomic bases of sperm biology. Here, I present a report of the recent BoS meeting, and showcase some of the highlights of this year’s meeting. PMID:25225623

  5. Internet Cancer Support Groups

    PubMed Central

    Chee, Wonshik; Tsai, Hsiu-Min; Lin, Li-Chen; Cheng, Ching-Yu

    2006-01-01

    Internet Cancer Support Groups (ICSGs) are an emerging form of support group on Internet specifically for cancer patients. Previous studies have indicated the effectiveness of ICSGs as a research setting or a data-collection method. Yet recent studies have also indicated that ICSGs tend to serve highly educated, high-income White males who tend to be at an early stage of cancer. In this article, a total of 317 general ICSGs and 229 ethnic-specific ICSGs searched through Google.com, Yahoo.com, http://Msn.com, AOL.com, and ACOR.org are analyzed from a feminist perspective. The written records of group discussions and written memos by the research staff members were also analyzed using content analysis. The idea categories that emerged about these groups include (a) authenticity issues; (b) ethnicity and gender issues; (c) intersubjectivity issues; and (d) potential ethical issues. The findings suggest that (a) researchers adopt multiple recruitment strategies through various Internet sites and/or real settings; (b) researchers raise their own awareness of the potential influences of the health-related resources provided by ICSGs and regularly update their knowledge related to the federal and state standards and/or policies related to ICSGs; and (c) researchers consider adopting a quota-sampling method. PMID:15681976

  6. Prostate Cancer Support Groups

    PubMed Central

    Chambers, Suzanne; Garrett, Bernie; Bottorff, Joan L.; McKenzie, Michael; Han, Christina S.; Ogrodniczuk, John S.

    2015-01-01

    To understand prostate cancer (PCa) specialists’ views about prostate cancer support groups (PCSGs), a volunteer sample of Canada-based PCa specialists (n = 150), including urologists (n = 100), radiation oncologists (n = 40), and medical oncologists (n = 10) were surveyed. The 56-item questionnaire used in this study included six sets of attitudinal items to measure prostate cancer specialists’ beliefs about positive and negative influences of PCSGs, reasons for attending PCSGs, the attributes of effective PCSGs, and the value of face-to-face and web-based PCSGs. In addition, an open-ended question was included to invite additional input from participants. Results showed that PCSGs were positively valued, particularly for information sharing, education and psychosocial support. Inclusivity, privacy, and accessibility were identified as potential barriers, and recommendations were made for better marketing PCSGs to increase engagement. Findings suggest prostate cancer specialists highly valued the role and potential benefits of face-to-face PCSGs. Information provision and an educational role were perceived as key benefits. Some concerns were expressed about the ability of web-based PCSGs to effectively engage and educate men who experience prostate cancer. PMID:25061087

  7. Heating element support clip

    DOEpatents

    Sawyer, W.C.

    1995-08-15

    An apparatus for supporting a heating element in a channel formed in a heater base is disclosed. A preferred embodiment includes a substantially U-shaped tantalum member. The U-shape is characterized by two substantially parallel portions of tantalum that each have an end connected to opposite ends of a base portion of tantalum. The parallel portions are each substantially perpendicular to the base portion and spaced apart a distance not larger than a width of the channel and not smaller than a width of a graphite heating element. The parallel portions each have a hole therein, and the centers of the holes define an axis that is substantially parallel to the base portion. An aluminum oxide ceramic retaining pin extends through the holes in the parallel portions and into a hole in a wall of the channel to retain the U-shaped member in the channel and to support the graphite heating element. The graphite heating element is confined by the parallel portions of tantalum, the base portion of tantalum, and the retaining pin. A tantalum tube surrounds the retaining pin between the parallel portions of tantalum. 6 figs.

  8. Heating element support clip

    DOEpatents

    Sawyer, William C.

    1995-01-01

    An apparatus for supporting a heating element in a channel formed in a heater base is disclosed. A preferred embodiment includes a substantially U-shaped tantalum member. The U-shape is characterized by two substantially parallel portions of tantalum that each have an end connected to opposite ends of a base portion of tantalum. The parallel portions are each substantially perpendicular to the base portion and spaced apart a distance not larger than a width of the channel and not smaller than a width of a graphite heating element. The parallel portions each have a hole therein, and the centers of the holes define an axis that is substantially parallel to the base portion. An aluminum oxide ceramic retaining pin extends through the holes in the parallel portions and into a hole in a wall of the channel to retain the U-shaped member in the channel and to support the graphite heating element. The graphite heating element is confined by the parallel portions of tantalum, the base portion of tantalum, and the retaining pin. A tantalum tube surrounds the retaining pin between the parallel portions of tantalum.

  9. Pediatric Mechanical Circulatory Support

    PubMed Central

    Lorts, Angela; Morales, David

    2013-01-01

    Mechanical circulatory support (MCS) in the pediatric heart failure population has a limited history especially for infants, and neonates. It has been increasingly recognized that there is a rapidly expanding population of children diagnosed and living with heart failure. This expanding population has resulted in increasing numbers of children with medically resistant end-stage heart failure. The traditional therapy for these children has been heart transplantation. However, children with heart failure unlike adults do not have symptoms until they present with end-stage heart failure and therefore, cannot safely wait for transplantation. Many of these children were bridged to heart transplantation utilizing extracorporeal membranous oxygenation as a bridge to transplant which has yielded poor results. As such, industry, clinicians, and the government have refocused interest in developing increasing numbers of MCS options for children living with heart failure as a bridge to transplantation and as a chronic therapy. In this review, we discuss MCS options for short and long-term support that are currently available for infants and children with end-stage heart failure. PMID:24368965

  10. Painted supported lipid membranes

    PubMed Central

    Florin, E.-L.; Gaub, H. E.

    1993-01-01

    We report herein measurements on a novel type of supported lipid films, which we call painted supported membranes (PSM). These membranes are formed in a self-assembly process on alkylated gold films from an organic solution. The formation process was investigated with surface plasmon resonance microscopy. The optical and electrical properties of the films were determined for various types of lipids and as a function of temperature by means of cyclic voltammetry and potential relaxation after charge injection. We could show that these films exhibit an extraordinarily high specific resistivity which, depending on the lipid, may be as high as 109 ohm/cm2. We could also show that due to this low conductivity, an electrical polarization across the PSM relaxes with characteristic time constants of up to 20 min. The electrical properties together with their high mechanical stability and accessibility to surface sensitive techniques make these films well suitable model membranes for optical and electrical investigations. Examples for such applications are given in the subsequent article by Seifert et al. ImagesFIGURE 3FIGURE 4 PMID:19431873

  11. Constellation Training Facility Support

    NASA Technical Reports Server (NTRS)

    Flores, Jose M.

    2008-01-01

    The National Aeronautics and Space Administration is developing the next set of vehicles that will take men back to the moon under the Constellation Program. The Constellation Training Facility (CxTF) is a project in development that will be used to train astronauts, instructors, and flight controllers on the operation of Constellation Program vehicles. It will also be used for procedure verification and validation of flight software and console tools. The CxTF will have simulations for the Crew Exploration Vehicle (CEV), Crew Module (CM), CEV Service Module (SM), Launch Abort System (LAS), Spacecraft Adapter (SA), Crew Launch Vehicle (CLV), Pressurized Cargo Variant CM, Pressurized Cargo Variant SM, Cargo Launch Vehicle, Earth Departure Stage (EDS), and the Lunar Surface Access Module (LSAM). The Facility will consist of part-task and full-task trainers, each with a specific set of mission training capabilities. Part task trainers will be used for focused training on a single vehicle system or set of related systems. Full task trainers will be used for training on complete vehicles and all of its subsystems. Support was provided in both software development and project planning areas of the CxTF project. Simulation software was developed for the hydraulic system of the Thrust Vector Control (TVC) of the ARES I launch vehicle. The TVC system is in charge of the actuation of the nozzle gimbals for navigation control of the upper stage of the ARES I rocket. Also, software was developed using C standards to send and receive data to and from hand controllers to be used in CxTF cockpit simulations. The hand controllers provided movement in all six rotational and translational axes. Under Project Planning & Control, support was provided to the development and maintenance of integrated schedules for both the Constellation Training Facility and Missions Operations Facilities Division. These schedules maintain communication between projects in different levels. The Cx

  12. Office support staff.

    PubMed

    Choat, Dennis E

    2005-11-01

    The pace at which we live and practice in this new century leaves little time to manage many of the menial tasks of day-to-day survival. This is especially true in the field of medicine. With today's insurance policies and procedures, Health Information Privacy Protection Act (HIPPA) regulations, and the low return of payment for time invested, it is crucial to have a supportive group of people around you to help make your valuable time as meaningful as possible. This article will describe an arrangement of ancillary office staff for a colorectal practice. There will be detailed information on job descriptions, expectations, and level of training required for each. Upon completion of this article, one should be able to identify the personnel needed to establish and manage an efficient office from the front desk to the billing department and ultimately the practice manager. PMID:20011292

  13. NSI conference support

    NASA Technical Reports Server (NTRS)

    Aaron, Susan

    1991-01-01

    One of the many services NSI provides as an extension of customer/user support is to attend major scientific conferences. The conference effort provides NASA/OSSA scientists with many benefits: (1) scientist get to see NSI in action; they utilize the network to read email, and have recently begun to demonstrate their scientific research to their colleagues; (2) scientist get an opportunity to meet and interact with NSI Staff, which gives scientists a chance to get status on their requirements, ask about network status, get acquainted with our procedures, and learn about services; and (3) scientists are exposed to networking in a larger sense; particularly by knowing about other NASA groups who provide valuable scientific resources over the Internet.

  14. Support and maneuvering device

    DOEpatents

    Wood, R.L.

    1987-03-23

    A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof. 9 figs.

  15. Support and maneuvering device

    DOEpatents

    Wood, Richard L.

    1988-01-01

    A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof.

  16. Supporting Weather Data

    NASA Technical Reports Server (NTRS)

    2004-01-01

    Since its founding in 1992, Global Science & Technology, Inc. (GST), of Greenbelt, Maryland, has been developing technologies and providing services in support of NASA scientific research. GST specialties include scientific analysis, science data and information systems, data visualization, communications, networking and Web technologies, computer science, and software system engineering. As a longtime contractor to Goddard Space Flight Center s Earth Science Directorate, GST scientific, engineering, and information technology staff have extensive qualifications with the synthesis of satellite, in situ, and Earth science data for weather- and climate-related projects. GST s experience in this arena is end-to-end, from building satellite ground receiving systems and science data systems, to product generation and research and analysis.

  17. Supporting analyses and assessments

    SciTech Connect

    Ohi, J.

    1995-09-01

    Supporting analysis and assessments can provide a sound analytic foundation and focus for program planning, evaluation, and coordination, particularly if issues of hydrogen production, distribution, storage, safety, and infrastructure can be analyzed in a comprehensive and systematic manner. The overall purpose of this activity is to coordinate all key analytic tasks-such as technology and market status, opportunities, and trends; environmental costs and benefits; and regulatory constraints and opportunities-within a long-term and systematic analytic foundation for program planning and evaluation. Within this context, the purpose of the project is to help develop and evaluate programmatic pathway options that incorporate near and mid-term strategies to achieve the long-term goals of the Hydrogen Program. In FY 95, NREL will develop a comprehensive effort with industry, state and local agencies, and other federal agencies to identify and evaluate programmatic pathway options to achieve the long-term goals of the Program. Activity to date is reported.

  18. ATS materials support

    SciTech Connect

    Karnitz, M.A.; Wright, I.G.; Ferber, M.K.; Holcomb, R.S.; Rawlins, M.H.

    1996-12-31

    The technology based portion of the Advanced Turbine System Program (ATS) contains several subelements which address generic technology issues for land-base gas turbine systems. One subelement is the Materials/Manufacturing Technology Program which is coordinated by DOE-Oak Ridge Operations and Oak Ridge National laboratory (ORNL) for the Department of Energy. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. Projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. The materials manufacturing subelement was developed with input from gas turbine manufacturers, material suppliers, government laboratories and universities. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single-crystal airfoil manufacturing technologies, materials characterization and technology information exchange. Westinghouse Power Generation and Pratt and Whitney each have material programs to develop dependable TBCs that enable increased turbine inlet temperatures while maintaining airfoil substrate temperatures at levels to meet the ATS life goals. Howmet and PCC Airfoils each have projects to extend the capability of single-crystal complex-cored airfoil technology to larger sizes so that higher turbine inlet temperatures can be attained in land-based turbines in a cost-effective manner. Materials characterization tasks are ongoing on TBCs in support of the industrial projects. In addition, a project on long-term testing of ceramics and ceramic-matrix composites for gas turbines is being conducted in support of programs at Solar Turbines, Allison Engines, and Westinghouse Power Generation.

  19. Community Supported Stardust Compendia

    NASA Technical Reports Server (NTRS)

    Westphal, Andrew J.; DeGregorio, Bradley; Lettieri, Robert; Frank, David R.; Zolensky, Michael E.

    2013-01-01

    The Stardust cometary and interstellar collections present unprecedented challenges in sample preparation and analysis. The ensemble of approx.80 tracks and dozens of foil craters from the cometary collection for which we have analyses exhibits a bewildering complexity and diversity of materials. The interstellar collection is even more challenging, because of the extremely low fluence of interstellar dust, a relatively large background of secondary ejecta from impacts on the spacecraft, and the small size of interstellar dust, approximately three orders of magnitude smaller in mass than typical cometary particles. Unlike with the other returned sample collections, characterization of these samples beyond basic photo-documentation is not generally practical at JSC. Even among the other small-particle collections, currently the cosmic dust and Hayabusa samples, SEM/EDX can provide basic chemistry. This is not possible with Stardust particles without destructive and invasive sample preparation. Furthermore, SEM/EDX requires isolating small grains from adhering aerogel. A reliable technique to carry out this task does not exist. Complete characterization of particles requires coordinated analyses using synchrotron and electron-beam microprobes, which do not exist at any one lab. Thus, it was recognized since the Stardust Preliminary Examination in 2006 that characterization of the samples would rely on the worldwide community of Stardust Investigators. Here we announce the development of community-editable, wiki-style Stardust compendia that will support this effort. Our intention is that this will facilitate sample requests by providing basic characterization of tracks. We expect that this will also support comprehensive meta-analyses (global syntheses of analyses) of the collections.

  20. USA supports measles elimination.

    PubMed

    1996-06-01

    The United States, through the United States Agency for International Development (USAID), has approved an $8 million grant in support of the Pan American Health Organization (PAHO) goal to eliminate measles in the Americas by the year 2000. From 1996 to 2001, the grant will complement regional efforts to stop the disease. Mrs. Hillary Clinton had pledged the support on World Health Day 1995. Although record low levels of measles cases were reported in 1995 for the region, the virus could be imported from elsewhere in the world. A major obstacle is the accumulation of susceptible preschool-aged children. As the proportion of susceptibles expands, the risk of a measles outbreak increases, if the virus is reintroduced. To prevent this, follow-up campaigns are being conducted throughout the region, focusing on all children aged 1-4 years, regardless of previous vaccination or disease history. PAHO recommends follow-up whenever the number of susceptible preschool children approaches the size of an average birth cohort. The interval between these campaigns and the specific age group targeted will depend on the vaccination coverage obtained through routine services since the last campaign. Follow-up campaigns were conducted in Cuba in 1993; in Belize, Brazil, Columbia, and Jamaica in 1995; and in Chile and the countries of Central America during April 1996. 19 million children were reached. Follow-up campaigns are planned for the remaining countries of the English-speaking Caribbean later in 1996. USAID played a key role in the successful completion of the 1994 poliomyelitis eradication initiative; the agency contributed approximately 60% of the external costs associated with the hemispheric campaign. PMID:12347182

  1. Photovoltaic panel support assembly

    SciTech Connect

    Barker, J.M.; Underwood, J.C.; Shingleton, J.

    1993-07-20

    A solar energy electrical power source is described comprising in combination at least two flat photovoltaic panels disposed side-by-side in co-planar relation with one another, a pivot shaft extending transversely across the panels, at least two supports spaced apart lengthwise of the pivot shaft, means for connecting the pivot shaft to the at least two supports, attachment means for connecting the at least two panels to the pivot shaft so that the panels can pivot about the longitudinal axis of the shaft, coupling means mechanically coupling all of the panels together so as to form a unified flat array, and selectively operable drive means for mechanically pivoting the unified flat array about the axis; wherein each of the flat photovoltaic panels comprises at least two modules each comprising a plurality of electrically interconnected photovoltaic cells, the at least two modules being aligned along a line extending at a right angle to the pivot shaft, and the coupling means comprises (a) an elongate member extending parallel to and spaced from the pivot shaft and (b) means for attaching the elongate member to the panels; and further wherein each flat photovoltaic panel comprises a unitary frame consisting of a pair of end frame members extending parallel to the pivot shaft, a pair of side frame members extending between and connected to the end frame members, and a pair of spaced apart cross frame members, with one of the two modules being embraced by and secured to the side frame members and a first one of each of the end and cross frame members, and the other of the two modules being embraced by and secured to the side frame members and the second one of each of the end and cross frame members, whereby the gap created by the spaced apart cross frame members allow air to pass between them in order to reduce the sail effect when the solar array is subjected to buffeting winds.

  2. Reactor vessel support system. [LMFBR

    DOEpatents

    Golden, M.P.; Holley, J.C.

    1980-05-09

    A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

  3. Healthcare Virtual Support Communities: Pillars of Support and Companionship

    ERIC Educational Resources Information Center

    Huang, Kuang-Yuan

    2013-01-01

    The two studies in this dissertation identify and address two related research gaps in literature on healthcare virtual support communities. Study one suggested that the exclusive emphasis on social support behavior and its impacts on individual well-being in virtual support communities has led to the neglect of another type of social interaction…

  4. Lane Keeping Support

    NASA Astrophysics Data System (ADS)

    Gayko, Jens

    Während längerer Fahrten auf autobahnähnlichen Straßen wird die Fahraufgabe des Spurhaltens von vielen Fahrern als lästig empfunden. Andererseits stellt das unbeabsichtigte Verlassen des Fahrstreifens eine häufge Unfallursache dar, wie bereits in Kapitel 34 beschrieben. Im Gegensatz zu der im vorigen Kapitel dargelegten Funktion des Lane Departure Warning (LDW) greift die hier beschriebene Spurhalteassistenz bzw. Lane Keeping Support (LKS) aktiv in das Lenksystem ein. Dadurch wird der Fahrer bei der Fahraufgabe des Spurhaltens unterstützt. Ziel dieser Funktion ist, je nach Auslegung, eine Erhöhung der Sicherheit, eine Erhöhung des Fahrkomforts oder eine Kombination beider Ziele. Ein wichtiges Merkmal der hier beschriebenen Systeme ist die Art der Assistenz, die über Warnungen hinausgeht, jedoch keine den Fahrer ersetzende Assistenz darstellt. Die motorische Ausführung der Lenkung des Fahrzeugs erfolgt somit durch den Fahrer und das LKS-System zugleich. Das Einsatzgebiet der heute verfügbaren Systeme erstreckt sich über autobahnähnliche Straßen in mittleren bis hohen Geschwindigkeiten und sichtbaren Markierungen der Fahrstreifen.

  5. Carbon cloth supported electrode

    DOEpatents

    Lu, Wen-Tong P.; Ammon, Robert L.

    1982-01-01

    A flow-by anode is disclosed made by preparing a liquid suspension of about to about 18% by weight solids, the solids comprising about 3.5 to about 8% of a powdered catalyst of platinum, palladium, palladium oxide, or mixtures thereof; about 60 to about 76% carbon powder (support) having a particle size less than about 20 m.mu.m and about 20 to about 33% of an inert binder having a particle size of less than about 500 m.mu.m. A sufficient amount of the suspension is poured over a carbon cloth to form a layer of solids about 0.01 to about 0.05 cm thick on the carbon cloth when the electrode is completed. A vacuum was applied to the opposite side of the carbon cloth to remove the liquid and the catalyst layer/cloth assembly is dried and compressed at about 10 to about 50 MPa's. The binder is then sintered in an inert atmosphere to complete the electrode. The electrode is used for the oxidation of sulfur dioxide in a sulfur based hybrid cycle for the decomposition of water.

  6. IRTF and Mission Support

    NASA Astrophysics Data System (ADS)

    Tokunaga, Alan; Bus, S. J.; Rayner, J. T.; Tollestrup, E. V.

    2007-10-01

    The NASA Infrared Telescope Facility (IRTF) is a 3.0 meter infrared telescope located at an altitude of approximately 13,600 feet near the summit of Mauna Kea on the island of Hawaii. The IRTF was established by NASA to obtain solar system observations of interest to NASA. It is designed for maximum performance in the infrared portion of the spectrum, taking advantage of the high transmission, excellent seeing, minimal water vapor, and low thermal backgrounds that characterize the atmosphere above Mauna Kea. Facility instruments are provided for data acquisition, and these instruments are developed and maintained by the IRTF staff. Approximately 50% of the available time is assigned to mission support and planetary observations. Remote observing provides great flexibility for observing time critical events that do not require the entire night or that require frequent observing opportunities. Approximately 50-60% of the telescope time is currently scheduled for remote observations. Some recent science highlights are presented. Further information may be found at: http://irtfweb.ifa.hawaii.edu/.

  7. What Is Nutrition Support Therapy?

    MedlinePlus

    ... Professional Development Webinars Calendar of Events What Is Nutrition Support Therapy All people need food to live. ... patient populations from pediatrics to geriatrics. Key Terms: Nutrition Support Therapy The provision of enteral or parenteral ...

  8. Thermionic converter emitter support arrangement

    DOEpatents

    Allen, Daniel T.

    1990-01-01

    A support is provided for use in a thermionic converter to support an end an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially at its temperatures changes. The emitter end (34) is supported by a spring structure (44) that includes a pair of Belleville springs, and the spring structure is supported by a support structure (42) fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element (74) at the front end, a larger metal main support (76) at the rear end that is attached to the housng, and with a ceramic layer (80) between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer (120) captured between the Belleville springs.

  9. Thermionic converter emitter support arrangement

    DOEpatents

    Allen, Daniel T.

    1990-01-01

    A support is provided for use in a therminonic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end (34) is supported by a spring structure (44) that includes a pair of Belleville springs, and the spring structure is supported by a support structure (42) fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element (74) at the front end, a larger metal main support (76) at the rear end that is attached to the housing, and with a ceramic layer (80) between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer (120) captured between the Belleville springs.

  10. Organizations That Offer Support Services

    MedlinePlus

    ... of Health Search Help Need help finding support services? View more than 100 organizations nationwide that provide emotional, practical, and financial support services for people with cancer and their families. Financial ...

  11. Supporting Ice Seismology

    NASA Astrophysics Data System (ADS)

    Parker, T.; Beaudoin, B. C.; Fowler, J. C.

    2010-12-01

    Climate change research, and glaciology in particular, has increasingly embraced seismology in recent years. The NSF supported IRIS/PASSCAL Instrument Center is working with researchers to develop the unique instruments and techniques for collecting data in this challenging environment. Global concern with sea level change along with strategic interests of the US government and other nations is driving a large investment in glaciological climate research. A number of groups have demonstrated new seismologically-derived constraints on glaciological conditions and processes. Environmental challenges include remote and precarious locations, necessitating robust yet quickly deployable seismic stations and long periods of autonomous operation. Temperature extremes and the possibility of immersion from large annual snow loads, resulting in a deployment surface that can vary from 50 feet of snow cover to bare ice with large melt pools in a single season are additional major challenges. There is also an urgency created by studies indicating that the high latitude continental ice sheets are metastable and that behavior is changing now. Scientists are presently commonly utilizing adaptations of available instrumentation designed for low latitude and milder field conditions as appropriate, but seek better, more capable, and more flexible solutions, including integration of environmental sensors and real-time data telemetry and station control as some of these experiments evolve into a monitoring effort. Seismic instrumentation is only produced by a small number of companies and, innovation for new instruments takes time and requires substantial investment. While pursuing longer-term innovation funding strategies, we are also adapting current instrumentation paradigms to glaciological use (e.g., by leveraging the cold instrument development for research in Antarctica during the IPY). We are also encouraging industrial partners to respond to these demands and challenges with

  12. Process of making supported catalyst

    SciTech Connect

    Schwarz, James A.; Subramanian, Somasundaram

    1992-01-01

    Oxide supported metal catalysts have an additional metal present in intimate association with the metal catalyst to enhance catalytic activity. In a preferred mode, iridium or another Group VIII metal catalyst is supported on a titania, alumina, tungsten oxide, silica, or composite oxide support. Aluminum ions are readsorbed onto the support and catalyst, and reduced during calcination. The aluminum can be added as aluminum nitrate to the iridium impregnate solution, e.g. chloroiridic acid.

  13. Supported Employment Research: A Commentary.

    ERIC Educational Resources Information Center

    Szymanski, Edna Mora; Parker, Randall M.

    1987-01-01

    Addresses problems with the definition of terms and validity of results of research on supported employment. Draws conclusions regarding the state of supported employment research. Comments on the value of retaining flexibility in the concept of supported employment in meeting the needs of consumers. (Author/NB)

  14. Isomap based supporting vector machine

    NASA Astrophysics Data System (ADS)

    Liang, W. N.

    2015-12-01

    This research presents a new isomap based supporting vector machine method. Isomap is a dimension reduction method which is able to analyze nonlinear relationship of data on manifolds. Accordingly, support vector machine is established on the isomap manifold to classify given and predict unknown data. A case study of the isomap based supporting vector machine for environmental planning problems is conducted.

  15. Corporate Support of Education, 1985.

    ERIC Educational Resources Information Center

    Council for Financial Aid to Education, New York, NY.

    Results of the Council for Financial Aid to Education's 1985 survey of 439 companies providing financial support to higher education are summarized. Attention is directed to: national trends in corporate pretax net income and contributions; inflation; corporate support in relation to total voluntary support and institutional expenditures; the…

  16. Corporate Support of Education, 1983.

    ERIC Educational Resources Information Center

    Council for Financial Aid to Education, New York, NY.

    Results of the Council for Financial Aid to Education's 1983 survey of 503 companies providing financial support to higher education are summarized and tabulated. Attention is directed to: national trends in corporate pretax net income and contributions; effects of inflation; corporate support in relation to total voluntary support and…

  17. Corporate Support of Education, 1984.

    ERIC Educational Resources Information Center

    Council for Financial Aid to Education, New York, NY.

    Results of the Council for Financial Aid to Education's 1984 survey of 422 companies providing financial support to higher education are summarized. Attention is directed to: national trends in corporate pretax net income and contributions; inflation; corporate support in relation to total voluntary support and institutional expenditures; the…

  18. Extended mission life support systems

    NASA Technical Reports Server (NTRS)

    Quattrone, P. D.

    1985-01-01

    Extended manned space missions which include interplanetary missions require regenerative life support systems. Manned mission life support considerations are placed in perspective and previous manned space life support system technology, activities and accomplishments in current supporting research and technology (SR&T) programs are reviewed. The life support subsystem/system technologies required for an enhanced duration orbiter (EDO) and a space operations center (SOC), regenerative life support functions and technology required for manned interplanetary flight vehicles, and future development requirements are outlined. The Space Shuttle Orbiters (space transportation system) is space cabin atmosphere is maintained at Earth ambient pressure of 14.7 psia (20% O2 and 80% N2). The early Shuttle flights will be seven-day flights, and the life support system flight hardware will still utilize expendables.

  19. Supporting African refugees in Canada: insights from a support intervention.

    PubMed

    Stewart, Miriam; Simich, Laura; Shizha, Edward; Makumbe, Knox; Makwarimba, Edward

    2012-09-01

    Although evidence suggests the importance of social support for refugees, this knowledge has not been invoked to systematically develop culturally congruent support interventions that help refugees adapt to life in receiving countries. The objective of this study was to design and pilot test a culturally congruent intervention that meets the support needs and preferences of two ethno-culturally distinct refugee groups. Support was delivered to Somali and Sudanese refugees (n = 58), by trained peer and professional facilitators. Face-to-face groups comprised of refugees, matched by gender and ethnicity, were created to enhance the depleted social networks of Somali and Sudanese refugees. Each peer support group met bi-weekly for a face-to-face session for 12 weeks. Peer facilitators delivered supplementary one-to-one support via the telephone. The ingredients of the support intervention included: (i) peer facilitators and professionals; (ii) provision of information, affirmation and emotional support; and (iii) accessibility (e.g. childcare, transportation). The study employed a qualitative participatory research design. Data collected for the study included (i) in-depth pre-intervention interviews with potential support group participants in 2008-2009 to assess intervention preferences; (ii) fieldnotes by peer and professional facilitators during the intervention in 2009-10; (iii) post-intervention group interviews with support group participants in 2010; and (iv) in-depth interviews with peer and professional helpers in 2010. A major perceived benefit of the support programme was connecting with people from African refugee participants' cultural communities. Participants appreciated the gender and culture-specific groups. Following the social support intervention, refugees reported increased social integration, decreased loneliness and expanded coping repertoire. PMID:22639987

  20. Adolescents and social support situations.

    PubMed

    Olsson, Ingrid; Hagekull, Berit; Giannotta, Fabrizia; Åhlander, Camilla

    2016-06-01

    The present study concerned adolescents' needs for social support with a focus on specific situations. The Adolescent Need for Social Support Questionnaire (ANSSQ) was developed based on qualitative interviews with typically developing adolescents about situations in which they need parent support. The questionnaire was tested on a sample of 380 Swedish 15-year-olds. A 3-component structure reflecting the dimensions "Home and school", "Low mood", and "Sex and alcohol" was tested in SEM analyses. Scales based on these dimensions, measuring support from parents and peers, yielded satisfactory psychometric results. Parent support was preferred over peer support for "Home and school" situations; in the other two areas peers were more likely to be the support providers. Females turned more often to parents and friends for support than males. Seeking parental support was positively related to adolescent disclosure and negatively related to adolescent secrecy, indicating convergent and discriminant validity. Further validation of the ANSSQ is discussed. The current study points to possibilities for adapting measures of social support to contexts. PMID:27038341

  1. When supervisors feel supported: relationships with subordinates' perceived supervisor support, perceived organizational support, and performance.

    PubMed

    Shanock, Linda Rhoades; Eisenberger, Robert

    2006-05-01

    The authors surveyed full-time retail employees and their supervisors to investigate relationships of supervisors' perceived organizational support (POS) with subordinates' perceptions of support from their supervisors (perceived supervisor support [PSS]), POS, and in-role and extra-role performance. The authors found that supervisors' POS was positively related to their subordinates' perceptions of supervisor support. Subordinates' PSS, in turn, was positively associated with their POS, in-role performance, and extra-role performance. Beyond these bivariate relationships, subordinates' perceptions of support from the supervisor mediated positive relationships of the supervisors' POS with the subordinates' POS and performance. These findings suggest that supervisors who feel supported by the organization reciprocate with more supportive treatment for subordinates. PMID:16737364

  2. Family support in cancer survivorship.

    PubMed

    Muhamad, Mazanah; Afshari, Mojgan; Kazilan, Fitrisehara

    2011-01-01

    This paper raises issues about the role of family members in providing support for breast cancer survivors. Data were collected from 400 breast cancer survivors in Peninsular Malaysia through a custom-designed questionnaire fielded at hospitals and support group meetings. The data were analyzed using descriptive statistics. The analyses show that all family members could be supportive, especially in decision making and help with emotional issues. The spouse was the main support provider among the family members (others were children, parents, siblings and more distant relatives). The results also indicated that a significant percentage practiced collaborative decision-making. Breast cancer survivors needed their family members' support for information on survivorship strategies such as managing emotions, health, life style and dietary practice. The family members' supportive role may be linked to the Malaysian strong family relationship culture. For family members to contribute more adequately to cancer survivorship, it is suggested that appropriate educational intervention also be provided to them. PMID:22126470

  3. Telemetry carrier ring and support

    NASA Technical Reports Server (NTRS)

    Wakeman, Thomas G. (Inventor)

    1992-01-01

    A telemetry carrier ring for use in a gas turbine engine includes an annular support ring connected to the engine and an annular carrier ring coupled to the support ring, each ring exhibiting different growth characteristics in response to thermal and mechanical loading. The carrier ring is coupled to the support ring by a plurality of circumferentially spaced web members which are relatively thin in an engine radial direction to provide a predetermined degree of radial flexibility. the web members have a circumferential width and straight axial line of action selected to transfer torque and thrust between the support ring and the carrier ring without substantial deflection. The use of the web members with radial flexibility provides compensation between the support ring and the carrier ring since the carrier ring grows at a different rate than the supporting ring.

  4. ASME Code Efforts Supporting HTGRs

    SciTech Connect

    D.K. Morton

    2010-09-01

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  5. ASME Code Efforts Supporting HTGRs

    SciTech Connect

    D.K. Morton

    2011-09-01

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  6. ASME Code Efforts Supporting HTGRs

    SciTech Connect

    D.K. Morton

    2012-09-01

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  7. Biological life-support systems

    NASA Technical Reports Server (NTRS)

    Shepelev, Y. Y.

    1975-01-01

    The establishment of human living environments by biologic methods, utilizing the appropriate functions of autotrophic and heterotrophic organisms is examined. Natural biologic systems discussed in terms of modeling biologic life support systems (BLSS), the structure of biologic life support systems, and the development of individual functional links in biologic life support systems are among the factors considered. Experimental modeling of BLSS in order to determine functional characteristics, mechanisms by which stability is maintained, and principles underlying control and regulation is also discussed.

  8. Supported liquid membrane electrochemical separators

    SciTech Connect

    Pemsler, J. Paul; Dempsey, Michael D.

    1986-01-01

    Supported liquid membrane separators improve the flexibility, efficiency and service life of electrochemical cells for a variety of applications. In the field of electrochemical storage, an alkaline secondary battery with improved service life is described in which a supported liquid membrane is interposed between the positive and negative electrodes. The supported liquid membranes of this invention can be used in energy production and storage systems, electrosynthesis systems, and in systems for the electrowinning and electrorefining of metals.

  9. 75 FR 38611 - Child Support Enforcement Program; Intergovernmental Child Support

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-02

    ...This rule revises Federal requirements for establishing and enforcing intergovernmental support obligations in Child Support Enforcement (IV-D) program cases receiving services under title IV-D of the Social Security Act (the Act). This final rule revises previous interstate requirements to apply to case processing in all intergovernmental cases; requires the responding State IV-D agency to......

  10. Support that Can't Support: My Induction Program Experience

    ERIC Educational Resources Information Center

    Engel, Elaine

    2011-01-01

    The author is part of the Beginning Teacher Support and Assessment (BTSA) induction program--a California state program that is meant to offer support to new teachers as they exit the credential program and begin a job in a district. More than 80% of new teachers across the United States participate in some kind of induction program. At least 30…

  11. Multiscale hierarchical support vector clustering

    NASA Astrophysics Data System (ADS)

    Hansen, Michael Saas; Holm, David Alberg; Sjöstrand, Karl; Ley, Carsten Dan; Rowland, Ian John; Larsen, Rasmus

    2008-03-01

    Clustering is the preferred choice of method in many applications, and support vector clustering (SVC) has proven efficient for clustering noisy and high-dimensional data sets. A method for multiscale support vector clustering is demonstrated, using the recently emerged method for fast calculation of the entire regularization path of the support vector domain description. The method is illustrated on artificially generated examples, and applied for detecting blood vessels from high resolution time series of magnetic resonance imaging data. The obtained results are robust while the need for parameter estimation is reduced, compared to support vector clustering.

  12. Support Substructures: Support-Induced Part-Level Structural Representation.

    PubMed

    Huang, Shi-Sheng; Fu, Hongbo; Wei, Ling-Yu; Hu, Shi-Min

    2016-08-01

    In this work we explore a support-induced structural organization of object parts. We introduce the concept of support substructures, which are special subsets of object parts with support and stability. A bottom-up approach is proposed to identify such substructures in a support relation graph. We apply the derived high-level substructures to part-based shape reshuffling between models, resulting in nontrivial functionally plausible model variations that are difficult to achieve with symmetry-induced substructures by the state-of-the-art methods. We also show how to automatically or interactively turn a single input model to new functionally plausible shapes by structure rearrangement and synthesis, enabled by support substructures. To the best of our knowledge no single existing method has been designed for all these applications. PMID:26336128

  13. Supporting Inclusion: Beyond the Rhetoric.

    ERIC Educational Resources Information Center

    Roach, Virginia

    1995-01-01

    Creating a unitary system to support educating handicapped students in their neighborhood general education programs requires that general and specialized services complement and support each other and that all personnel employ instructional strategies that meet diverse students' needs. Restructuring efforts require careful planning,…

  14. Administrative Support for Board Members

    ERIC Educational Resources Information Center

    McAdams, Donald R.

    2006-01-01

    In this article, the author discusses the need of administrative support for board members. An effective board services office can help a lot in attracting and retaining community leaders. Board members need administrative support to help them manage events, records, communications, scheduling, correspondence and constituent service. In small to…

  15. Changing Peer Support for Superintendents

    ERIC Educational Resources Information Center

    Teitel, Lee

    2009-01-01

    This article describes a better form of peer support for superintendents. Old models of peer support--guest speakers, war stories, and a culture of protected and isolated practice--cannot provide what superintendents need. Today, in a major cultural change, dozens of superintendents in small groups share real problems, improve their practice and…

  16. Consumer Leadership in Supported Employment.

    ERIC Educational Resources Information Center

    Inge, Katherine J., Ed.

    1992-01-01

    This newsletter issue provides rehabilitation professionals with various information pieces concerning consumer leadership in supported employment of people with disabilities. First, a chart lists five questions concerning self advocacy and supported employment, and provides consumer responses to the questions. A second item describes…

  17. Supporting Assessment in Undergraduate Mathematics

    ERIC Educational Resources Information Center

    Steen, Lynn Arthur, Ed.

    2006-01-01

    This publication contains 29 case studies offering lessons learned during a four year NSF-supported MAA project designed to support mathematicians and mathematics departments in the increasingly important challenge of assessing student learning. Three introductory essays set assessment in broader academic and national contexts; an appendix…

  18. GROUND WATER TECHNICAL SUPPORT CENTER

    EPA Science Inventory

    EPA's Office of Research and Development operates a Ground Water Technical Support Center (GWTSC). The Center provides support on issues regarding subsurface contamination, contaminant fluxes to other media (e.g., surface water or air), and ecosystem restoration. The GWTSC creat...

  19. Prepubescent Strength Training Gains Support.

    ERIC Educational Resources Information Center

    Duda, Marty

    1986-01-01

    Recent studies have stimulated greater support for prepubescent weight training. There seems to be general agreement that strength and weight training, when practiced under properly controlled conditions, is safe and efficacious for prepubescents. Weight lifting is not supported. Recommendations for weight training are made, and reservations are…

  20. Cultivating Foundation Support for Education.

    ERIC Educational Resources Information Center

    Murphy, Mary Kay, Ed.

    The process of acquiring financial support from private foundations is discussed in 26 essays, divided into five categories (Targeting the Foundation Market; Getting Started: Tools of the Trade; The Process of Foundation Fund Raising; The Grant Maker's Perspective; and Focused Programs and Foundation Support). A prologue, "Ethics and Foundation…

  1. Technology in Instructional Support Services.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany.

    This manual is intended to provide directors of funded programs and teachers with an awareness of a wide range of technology services, programs, and applications for improving the quality and effectiveness of instructional support services in New York State schools. The first of nine chapters contains two papers: "Technology Support for…

  2. Supporting the Work Keys System.

    ERIC Educational Resources Information Center

    McGintry, Louis

    1999-01-01

    Seeks faculty's understanding of and support for the Work Keys System, which is designed to determine the level of skill required for an occupation, assess the level of a skill of a prospective employee, and compare the skills requirements against the skills possessed. Describes how Work Keys supports various educational philosophies and Knowles'…

  3. Advanced support systems development and supporting technologies for Controlled Ecological Life Support Systems (CELSS)

    NASA Technical Reports Server (NTRS)

    Simon, William E.; Li, Ku-Yen; Yaws, Carl L.; Mei, Harry T.; Nguyen, Vinh D.; Chu, Hsing-Wei

    1994-01-01

    A methyl acetate reactor was developed to perform a subscale kinetic investigation in the design and optimization of a full-scale metabolic simulator for long term testing of life support systems. Other tasks in support of the closed ecological life support system test program included: (1) heating, ventilation and air conditioning analysis of a variable pressure growth chamber, (2) experimental design for statistical analysis of plant crops, (3) resource recovery for closed life support systems, and (4) development of data acquisition software for automating an environmental growth chamber.

  4. Counting electrons on supported nanoparticles

    NASA Astrophysics Data System (ADS)

    Lykhach, Yaroslava; Kozlov, Sergey M.; Skála, Tomáš; Tovt, Andrii; Stetsovych, Vitalii; Tsud, Nataliya; Dvořák, Filip; Johánek, Viktor; Neitzel, Armin; Mysliveček, Josef; Fabris, Stefano; Matolín, Vladimír; Neyman, Konstantin M.; Libuda, Jörg

    2016-03-01

    Electronic interactions between metal nanoparticles and oxide supports control the functionality of nanomaterials, for example, the stability, the activity and the selectivity of catalysts. Such interactions involve electron transfer across the metal/support interface. In this work we quantify this charge transfer on a well-defined platinum/ceria catalyst at particle sizes relevant for heterogeneous catalysis. Combining synchrotron-radiation photoelectron spectroscopy, scanning tunnelling microscopy and density functional calculations we show that the charge transfer per Pt atom is largest for Pt particles of around 50 atoms. Here, approximately one electron is transferred per ten Pt atoms from the nanoparticle to the support. For larger particles, the charge transfer reaches its intrinsic limit set by the support. For smaller particles, charge transfer is partially suppressed by nucleation at defects. These mechanistic and quantitative insights into charge transfer will help to make better use of particle size effects and electronic metal-support interactions in metal/oxide nanomaterials.

  5. Thermally stable nanoparticles on supports

    DOEpatents

    Roldan Cuenya, Beatriz; Naitabdi, Ahmed R.; Behafarid, Farzad

    2012-11-13

    An inverse micelle-based method for forming nanoparticles on supports includes dissolving a polymeric material in a solvent to provide a micelle solution. A nanoparticle source is dissolved in the micelle solution. A plurality of micelles having a nanoparticle in their core and an outer polymeric coating layer are formed in the micelle solution. The micelles are applied to a support. The polymeric coating layer is then removed from the micelles to expose the nanoparticles. A supported catalyst includes a nanocrystalline powder, thin film, or single crystal support. Metal nanoparticles having a median size from 0.5 nm to 25 nm, a size distribution having a standard deviation .ltoreq.0.1 of their median size are on or embedded in the support. The plurality of metal nanoparticles are dispersed and in a periodic arrangement. The metal nanoparticles maintain their periodic arrangement and size distribution following heat treatments of at least 1,000.degree. C.

  6. A neural support vector machine.

    PubMed

    Jändel, Magnus

    2010-06-01

    Support vector machines are state-of-the-art pattern recognition algorithms that are well founded in optimization and generalization theory but not obviously applicable to the brain. This paper presents Bio-SVM, a biologically feasible support vector machine. An unstable associative memory oscillates between support vectors and interacts with a feed-forward classification pathway. Kernel neurons blend support vectors and sensory input. Downstream temporal integration generates the classification. Instant learning of surprising events and off-line tuning of support vector weights trains the system. Emotion-based learning, forgetting trivia, sleep and brain oscillations are phenomena that agree with the Bio-SVM model. A mapping to the olfactory system is suggested. PMID:20092978

  7. Ergonomically neutral arm support system

    DOEpatents

    Siminovitch, Michael J; Chung, Jeffrey Y; Dellinges, Steven; Lafever, Robin E

    2005-08-02

    An ergonomic arm support system maintains a neutral position for the forearm. A mechanical support structure attached to a chair or other mounting structure supports the arms of a sitting or standing person. The system includes moving elements and tensioning elements to provide a dynamic balancing force against the forearms. The support structure is not fixed or locked in a rigid position, but is an active dynamic system that is maintained in equipoise by the continuous operation of the opposing forces. The support structure includes an armrest connected to a flexible linkage or articulated or pivoting assembly, which includes a tensioning element such as a spring. The pivoting assembly moves up and down, with the tensioning element providing the upward force that balances the downward force of the arm.

  8. Nutritional support and gastrointestinal disease.

    PubMed

    Hennessy, K

    1989-06-01

    The use of nutritional support in patients with acute gastrointestinal disease requires a thorough knowledge of the pathophysiology and nutritional alterations that are caused by the disease process. Although nutritional therapy of a patient with gastrointestinal disease is not curative of the underlying disease, it does provide essential support to the patient, which improves response to, and eventual recovery from, illness. Special considerations need to be made to avoid complicating the patient's condition by inappropriate use of nutritional support solutions, which can lead to abnormal liver function. PMID:2498848

  9. Mission support plan STS-2

    NASA Technical Reports Server (NTRS)

    Ibanez, F.

    1981-01-01

    The plan defines the anticipated GSTDN/DOD station support and configuration requirements for a nominal flight with an orbital inclination of 38.4 degrees and a circular orbit of 120 nautical miles for the first 5 orbits and 137 nautical miles thereafter. A complete set of preliminary site configuration messages (SCM) define nominal station AOS/LOS times and configurations for S-Band and UHF support. This document is intended for use as a planning tool, providing the necessary guidelines and data base for SCM generation in support of STS-2.

  10. Aerospace Medical Support in Russia

    NASA Technical Reports Server (NTRS)

    Castleberry, Tara; Chamberlin, Blake; Cole, Richard; Dowell, Gene; Savage, Scott

    2011-01-01

    This slide presentation reviews the role of the flight surgeon in support of aerospace medical support operations at the Gagarin Cosmonaut Training Center (GCTC), also known as Star City, in Russia. The flight surgeon in this role is the medical advocate for non-russian astronauts, and also provides medical care for illness and injury for astronauts, family members, and guests as well as civil servants and contractors. The flight surgeon also provides support for hazardous training. There are various photos of the area, and the office, and some of the equipment that is used.

  11. Become an AGU Supporting Member

    NASA Astrophysics Data System (ADS)

    You can extend your commitment to the continuing vitality .of geophysics by helping AGU to build funds that will provide for new initiatives and assist in funding some of the nonrevenue programs of AGU, such as the congressional science fellowship, minority student scholarships, and student travel grants. The AGU Development Committee is seeking gifts and contributions toward building the endowment of the Union: The vitality of AGU and the vitality of geophysics march hand in hand.Four categories of supporting membership are offered by the Union: Individual Supporting Member ($80 per year), Life Supporting Member ($1500), Sustaining Member ($5000), Benefactor ($10,000). Benefactors, Sustaining, and Life Supporting Members pay no further dues.

  12. Catalysis on Single Supported Atoms

    SciTech Connect

    DeBusk, Melanie Moses; Narula, Chaitanya Kumar

    2015-01-01

    The highly successful application of supported metals as heterogeneous catalysts in automotive catalysts, fuel cells, and other multitudes of industrial processes have led to extensive efforts to understand catalyst behavior at the nano-scale. Recent discovery of simple wet methods to prepare single supported atoms, the smallest nano-catalyst, has allowed for experimental validation of catalytic activity of a variety of catalysts and potential for large scale production for such catalysts for industrial processes. In this chapter, we summarize the synthetic and structural aspects of single supported atoms. We also present proposed mechanisms for the activity of single supported catalysts where conventional mechanisms cannot operate due to lack of M-M bonds in the catalysts.

  13. Depression and Bipolar Support Alliance

    MedlinePlus

    ... events Visit the podcast archive Mood Disorders Depression Bipolar Disorder Anxiety Screening Center Co-occurring Illnesses/Disorders Related ... for Your Patients Information about Depression Information about Bipolar Disorder Wellness Tools DBSA Support Groups Active Research Studies ...

  14. ISIS Support for Dawn Instruments

    NASA Astrophysics Data System (ADS)

    Becker, K. J.; Anderson, J. A.; Barrett, J. M.; Sides, S. C.; Titus, T. N.

    2012-03-01

    The USGS ISIS system now includes support for the Dawn FC and VIR instruments with ingestion and camera/sensor model software. This provides the scientific community with the means to process Dawn image data into geologic maps.

  15. Photocatalytic reactor with flexible supports

    DOEpatents

    Jacoby, William A.; Blake, Daniel M.

    1995-01-01

    Organic pollutants and bioaerosols in a gaseous stream are oxidized by exposure to light (e.g., UV light) in the presence of semiconductor catalyst particles or coatings supported on flexible strips suspended in the gaseous stream.

  16. Photocatalytic reactor with flexible supports

    DOEpatents

    Jacoby, W.A.; Blake, D.M.

    1995-09-12

    Organic pollutants and bioaerosols in a gaseous stream are oxidized by exposure to light (e.g., UV light) in the presence of semiconductor catalyst particles or coatings supported on flexible strips suspended in the gaseous stream. 3 figs.

  17. Supported molten-metal catalysts

    DOEpatents

    Datta, Ravindra; Singh, Ajeet; Halasz, Istvan; Serban, Manuela

    2001-01-01

    An entirely new class of catalysts called supported molten-metal catalysts, SMMC, which can replace some of the existing precious metal catalysts used in the production of fuels, commodity chemicals, and fine chemicals, as well as in combating pollution. SMMC are based on supporting ultra-thin films or micro-droplets of the relatively low-melting (<600.degree. C.), inexpensive, and abundant metals and semimetals from groups 1, 12, 13, 14, 15 and 16, of the periodic table, or their alloys and intermetallic compounds, on porous refractory supports, much like supported microcrystallites of the traditional solid metal catalysts. It thus provides orders of magnitude higher surface area than is obtainable in conventional reactors containing molten metals in pool form and also avoids corrosion. These have so far been the chief stumbling blocks in the application of molten metal catalysts.

  18. Space Communications Networks Support MMS

    NASA Video Gallery

    All three of NASA’s Space Communications Networks are excited to support the Magnetospheric Multiscale (MMS) Mission in its journey to study the microphysics of magnetic reconnection. The Near Eart...

  19. Optimizing secondary tailgate support selection

    SciTech Connect

    Harwood, C.; Karmis, M.; Haycocks, C.; Luo, J.

    1996-12-01

    A model was developed to facilitate secondary tailgate support selection based on analysis of over 100 case studies, compiled from two different surveys of operating longwall coal mines in the United States. The ALPS (Analysis of Longwall Pillar Stability) program was used to determine adequacy of pillar design for the successful longwall case histories. A relationship was developed between the secondary support density necessary to maintain a stable tailgate entry during mining and the CMRR (Coal Mine Roof Rating). This relationship defines the lower bound of secondary support density currently used in longwall mines. The model used only successful tailgate case history data, with adequate ALPS SF according to the CMRR for each case. This model facilitates mine design by predicting secondary support density required for a tailgate entry depending on the ALPS SF and CMRR, which can result in significant economic benefits.

  20. Mobile mine roof support system

    SciTech Connect

    Nelson, R.C.

    1981-12-29

    A description is given of a mobile self-propelled mine roof support system employing pairs of individually self-propelled roof support units movable along opposite ribs of a mine room to follow an advancing mine face. Each support unit comprises an elongated, wheel-mounted frame positioned along the adjacent rib. Pairs of vertical jacks are connected to opposite sides of the frame, being positioned loosely, and vertically movable, within oversize openings in brackets attached to the frame. A foot plate is universally pivotally attached to the lower ends of each pair of jacks and extends across the underside of the frame. A top-supporting canopy is universally pivotally attached across the upper ends of each pair of jacks and has an overhanging portion extending cantileverly into the room toward the opposite support unit. The jacks have external flanges engagable with the brackets. When the jacks fully retract the foot plate from the mine bottom upwardly against the underside of the frame, the entire assembly including the canopies is clamped rigidly between the brackets and the underside of the frame to lock the canopies to the frame for tramming. After the pairs of jacks press the foot plates downwardly against the bottom, the jacks shift upwardly to disengage their external flanges from the brackets and to press the canopies against the mine top. In an alternate embodiment, the ends of the canopies of the opposite roof support units are interconnected by wire ropes or chains and tensioned by hydraulic cylinders to support the top at the center of the room. A horizontally swingable inbye section of the frame has at least one canopy to continuously support the top when the mining operation changes direction, as when it makes a breakthrough from one room to another.

  1. Process Hood Stand Support Steel

    SciTech Connect

    VAN KATWIJK, C.

    2000-04-03

    This package is written to comply with EN-6-035-00 for upgrade dedication of commercial grade items (CGI). The SNF-5953 CGI package provides the Technical evaluation to identify the critical characteristics and the acceptance criteria associated with the safety function of the Hood Stand Support Steel. Completion of the technical and quality requirements identified in the dedication package will provide enough data to be reasonably assured that CGI Hood Stand Support Steel will perform its SC function.

  2. Skylab astronaut life support assembly

    NASA Technical Reports Server (NTRS)

    Brown, J. T.

    1972-01-01

    A comparative study was performed to define an optimum portable life support system for suited operations inside and outside the Skylab Program. Emphasis was placed on utilization of qualified equipment, modified versions of qualified equipment, and new systems made up to state-of-the-art components. Outlined are the mission constraints, operational modes, and evaluation ground rules by which the Skylab portable life support system was selected and the resulting design.

  3. Supporting NASA Facilities Through GIS

    NASA Technical Reports Server (NTRS)

    Ingham, Mary E.

    2000-01-01

    The NASA GIS Team supports NASA facilities and partners in the analysis of spatial data. Geographic Information System (G[S) is an integration of computer hardware, software, and personnel linking topographic, demographic, utility, facility, image, and other geo-referenced data. The system provides a graphic interface to relational databases and supports decision making processes such as planning, design, maintenance and repair, and emergency response.

  4. Life Support Systems Microbial Challenges

    NASA Technical Reports Server (NTRS)

    Roman, Monserrate C.

    2009-01-01

    This viewgraph presentation reviews the current microbial challenges of environmental control and life support systems. The contents include: 1) Environmental Control and Life Support Systems (ECLSS) What is it?; 2) A Look Inside the International Space Station (ISS); 3) The Complexity of a Water Recycling System; 4) ISS Microbiology Acceptability Limits; 5) Overview of Current Microbial Challenges; 6) In a Perfect World What we Would like to Have; and 7) The Future.

  5. Mission Operations Support Area (MOSA) for ground network support

    NASA Technical Reports Server (NTRS)

    Woods, Robert D.; Moser, Susan A.

    1993-01-01

    The Mission Operations Support Area (MOSA) has been designed utilizing numerous commercial off the shelf items allowing for easy maintenance and upgrades. At its inception, all equipment was at the forefront of technology. The system was created to provide the operator with a 'State of the Art' replacement for equipment that was becoming antiquated and virtually impossible to repair because new parts were no longer available. Although the Mini-NOCC provided adequate support to the Network for a number of years, it was quickly becoming ineffectual for higher data rate and non-standard missions. The MOSA will prove to be invaluable in the future as more and more missions require Ground Network support.

  6. Supporting Success for All Students

    NASA Astrophysics Data System (ADS)

    Manduca, C. A.; Macdonald, H.; McDaris, J. R.; Weissmann, G. S.

    2015-12-01

    The geoscience student population in the United States today does not reflect the diversity of the US population. Not only does this challenge our ability to educate sufficient numbers of students in the geosciences, it also challenges our ability to address issues of environmental justice, to bring geoscience expertise to diverse communities, and to pursue a research agenda reflecting the needs and interests of our nation as a whole. Programs that are successful in supporting students from underrepresented groups attend to the whole student (Jolly et al, 2004) as they develop not only knowledge and skills, but a sense of belonging and a drive to succeed in geoscience. The whole student approach provides a framework for supporting the success of all students, be they members of underrepresented groups or not. Important aspects of support include mentoring and advising, academic support, an inclusive learning community, and opportunities to learn about the profession and to develop geoscience and professional skills. To successfully provide support for the full range of students, it is critical to consider not only what opportunities are available but the barriers different types of students face in accessing these opportunities. Barriers may arise from gaps in academic experiences, crossing into a new and unfamiliar culture, lack of confidence, stereotype threat, implicit bias and other sources. Isolation of geoscience learning from its application and social context may preferentially discourage some groups. Action can be taken to increase support for all students within an individual course, a department or an institution. The InTeGrate STEP Center for the Geosciences, the Supporting and Advancing Geoscience Education at Two-Year Colleges program and the On the Cutting Edge Professional Development for Geoscience Faculty program all provide resources for individuals and departments including on line information, program descriptions, and workshop opportunities.

  7. Counting electrons on supported nanoparticles.

    PubMed

    Lykhach, Yaroslava; Kozlov, Sergey M; Skála, Tomáš; Tovt, Andrii; Stetsovych, Vitalii; Tsud, Nataliya; Dvořák, Filip; Johánek, Viktor; Neitzel, Armin; Mysliveček, Josef; Fabris, Stefano; Matolín, Vladimír; Neyman, Konstantin M; Libuda, Jörg

    2016-03-01

    Electronic interactions between metal nanoparticles and oxide supports control the functionality of nanomaterials, for example, the stability, the activity and the selectivity of catalysts. Such interactions involve electron transfer across the metal/support interface. In this work we quantify this charge transfer on a well-defined platinum/ceria catalyst at particle sizes relevant for heterogeneous catalysis. Combining synchrotron-radiation photoelectron spectroscopy, scanning tunnelling microscopy and density functional calculations we show that the charge transfer per Pt atom is largest for Pt particles of around 50 atoms. Here, approximately one electron is transferred per ten Pt atoms from the nanoparticle to the support. For larger particles, the charge transfer reaches its intrinsic limit set by the support. For smaller particles, charge transfer is partially suppressed by nucleation at defects. These mechanistic and quantitative insights into charge transfer will help to make better use of particle size effects and electronic metal-support interactions in metal/oxide nanomaterials. PMID:26657332

  8. State of nutrition support teams.

    PubMed

    DeLegge, Mark Henry; Kelly, Andrea True; Kelley, Andrea True

    2013-12-01

    The incidence of malnutrition in hospitalized patients is relatively high (up to 55%) despite breakthroughs in nutrition support therapies. These patients have increased morbidity and mortality, extended hospital stays, and care that is associated with higher costs. These patients are often poorly managed due to inadequate nutrition assessment and poor medical knowledge and practice in the field of nutrition. Nutrition support teams (NSTs) are interdisciplinary support teams with specialty training in nutrition that are often comprised of physicians, dietitians, nurses, and pharmacists. Their role includes nutrition assessment, determination of nutrition needs, recommendations for appropriate nutrition therapy, and management of nutrition support therapy. Studies have demonstrated significant improvements in patient nutrition status and improved clinical outcomes as well as reductions in costs when patients were appropriately managed by a multispecialty NST vs individual caregivers. Despite this, there has been steady decline in the number of formal NST in recent years (65% of hospitals in 1995 to 42% in 2008) as hospitals and other healthcare organizations look for ways to cut costs. Given the importance of nutrition status on clinical outcomes and overall healthcare costs, a number of institutions have introduced and sustained strong nutrition training and support programs and teams, demonstrating both clinical and economic benefit. The benefits of NST, training and implementation strategies, and tips for justifying these clinically and economically beneficial groups to healthcare organizations and governing bodies are discussed in this review. PMID:24170578

  9. Consolidated incineration facility technical support

    SciTech Connect

    Burns, D.; Looper, M.G.

    1993-12-31

    In 1996, the Savannah River Site plans to begin operation of the Consolidated Incineration Facility (CIF) to treat solid and liquid RCRA hazardous and mixed wastes. The Savannah River Technology Center (SRTC) leads an extensive technical support program designed to obtain incinerator and air pollution control equipment performance data to support facility start-up and operation. Key components of this technical support program include recently completed waste burn tests at both EPA`s Incineration Research Facility and at Energy and Environmental Research Corporation`s Solid Waste Incineration Test Facility. The main objectives for these tests were determining the fate of heavy metals, measuring organics destruction and removal efficiencies, and quantifying incinerator offgas particulate loading and size distribution as a function of waste feed characteristics and incineration conditions. In addition to these waste burning tests, the SRTC has recently completed installations of the Offgas Components Test Facility (OCTF), a 1/10 scale CIF offgas system pilot plant. This pilot facility will be used to demonstrate system operability and maintainability, evaluate and optimize equipment and instrument performance, and provide direct CIF start-up support. Technical support programs of this type are needed to resolve technical issues related with treatment and disposal of combustible hazardous, mixed, and low-level radioactive waste. Implementation of this program will minimize facility start-up problems and help insure compliance with all facility performance requirements.

  10. Advanced Life Support Project Plan

    NASA Technical Reports Server (NTRS)

    2002-01-01

    Life support systems are an enabling technology and have become integral to the success of living and working in space. As NASA embarks on human exploration and development of space to open the space frontier by exploring, using and enabling the development of space and to expand the human experience into the far reaches of space, it becomes imperative, for considerations of safety, cost, and crew health, to minimize consumables and increase the autonomy of the life support system. Utilizing advanced life support technologies increases this autonomy by reducing mass, power, and volume necessary for human support, thus permitting larger payload allocations for science and exploration. Two basic classes of life support systems must be developed, those directed toward applications on transportation/habitation vehicles (e.g., Space Shuttle, International Space Station (ISS), next generation launch vehicles, crew-tended stations/observatories, planetary transit spacecraft, etc.) and those directed toward applications on the planetary surfaces (e.g., lunar or Martian landing spacecraft, planetary habitats and facilities, etc.). In general, it can be viewed as those systems compatible with microgravity and those compatible with hypogravity environments. Part B of the Appendix defines the technology development 'Roadmap' to be followed in providing the necessary systems for these missions. The purpose of this Project Plan is to define the Project objectives, Project-level requirements, the management organizations responsible for the Project throughout its life cycle, and Project-level resources, schedules and controls.

  11. Carbon-supported and alumina-supported niobium sulfide catalysts

    SciTech Connect

    Allali, N.; Marie, A.M.; Danot, M.

    1995-10-01

    Few studies deal with the properties of niobium sulfide as a hydrodesulfurization catalyst. In this paper, the preparation of carbon-supported niobium sulfide catalysts was optimized concerning (i) the nature of the soluble precursor, (ii) the drying process, and (iii) the sulfurizing treatment, which was always performed under atmospheric pressure but for different H{sub 2}S-based flows and reaction temperatures. The activities of the best samples prepared with niobium oxalate as the impregnation salt, drying at room temperature, and presulfurization with N{sub 2}/H{sub 2}S at 400{degrees}C are superior to that of a supported MoS{sub 2} reference catalyst. Alumina-supported systems can be sulfurized only under more severe conditions (CS{sub 2} under pressure). After optimization of the sulfurization treatment (400{degrees}C, 10 h) the maximum activity obtained is significantly higher than that of a molybdenum sulfide reference catalyst. The catalytic activities of the various catalysts studied are related to their morphological and chemical characteristics using TPR and EXAFS measurements. The work illustrates the importance of the support and the sulfurization method on the genesis of a niobium sulfide active phase. 37 refs., 7 figs., 4 tabs.

  12. Metal-support bonds in supported metal catalysts

    SciTech Connect

    Gates, B.C.

    1990-01-01

    This research project, now in its third year, is an investigation of the synthesis, structure, and bonding of a family of metal complexes, clusters, and particles on the surfaces of high-area metal oxide supports. The focus is the structure of the metal-support interface. Surface species have been prepared by synthetic organometallic chemistry on the support surfaces. The organometallic precursors are complexes of W, Re, Os, Ir, and Pt, including W(CO){sub 6}, HRe(CO){sub 5}, Re{sub 2}(CO){sub 10}, H{sub 3}Re{sub 3}(CO){sub 12}, H{sub 2}Os(CO){sub 4}, Ir({eta}{sup 3}-C{sub 3}H{sub 5}){sub 3}, and Pt({eta}{sup 3}-C{sub 3}H{sub 5}){sub 2}. The supports are primarily MgO and {gamma}-Al{sub 2}O{sub 3}. The surface species have been characterized by infrared and EXAFS spectroscopies, among other techniques. 7 refs., 5 figs., 4 tabs.

  13. Supporting Multiple Cognitive Processing Styles Using Tailored Support Systems

    SciTech Connect

    Tuan Q. Tran; Karen M. Feigh; Amy R. Pritchett

    2007-08-01

    According to theories of cognitive processing style or cognitive control mode, human performance is more effective when an individual’s cognitive state (e.g., intuition/scramble vs. deliberate/strategic) matches his/her ecological constraints or context (e.g., utilize intuition to strive for a "good-enough" response instead of deliberating for the "best" response under high time pressure). Ill-mapping between cognitive state and ecological constraints are believed to lead to degraded task performance. Consequently, incorporating support systems which are designed to specifically address multiple cognitive and functional states e.g., high workload, stress, boredom, and initiate appropriate mitigation strategies (e.g., reduce information load) is essential to reduce plant risk. Utilizing the concept of Cognitive Control Models, this paper will discuss the importance of tailoring support systems to match an operator's cognitive state, and will further discuss the importance of these ecological constraints in selecting and implementing mitigation strategies for safe and effective system performance. An example from the nuclear power plant industry illustrating how a support system might be tailored to support different cognitive states is included.

  14. Supporting Children with Speech and Language Difficulties. Supporting Children Series

    ERIC Educational Resources Information Center

    David Fulton Publishers, 2004

    2004-01-01

    Off-the-shelf support containing all the vital information practitioners need to know about Speech and Language Difficulties, this book includes: (1) Strategies for developing attention control; (2) Guidance on how to improve language and listening skills; and (3) Ideas for teaching phonological awareness. Following a foreword and an introduction,…

  15. Children's Experiences with Chat Support and Telephone Support

    ERIC Educational Resources Information Center

    Fukkink, Ruben G.; Hermanns, Jo M. A.

    2009-01-01

    Background: In line with the wider trend of offering support via the Internet, many counseling and referral services for children have introduced online chat, often in addition to a traditional telephone service. Methods: A comparative study was conducted between the telephone service and the confidential one-on-one online chat service of the…

  16. Decision Support Framework (DSF) (Formerly Decision Support Platform)

    EPA Science Inventory

    The Science Advisory Board (SAB) provided several comments on the draft Ecosystem Services Research Program's (ESRP's) Multi-Year Plan (MYP). This presentation provides a response to comments related to the decision support framework (DSF) part of Long-Term Goal 1. The comments...

  17. AXAF Science Center: User Support

    NASA Astrophysics Data System (ADS)

    Wilkes, B. J.

    1997-05-01

    The purpose of the AXAF Science Center (ASC) is to provide the support required by the science community to realize fully the potential of the Advanced X-ray Astrophysics Facility (AXAF). We maintain expertise on all aspects of the AXAF mission from submitting a proposal to the receipt and analysis of data by a guest observer. We interface with the observers and the operations center (co-located in Cambridge) in the planning and scheduling of observations and with the instrument teams on the calibration and status of the detectors. We will develop, export and support portable analysis software to allow users to analyse their own data. The User Support Group is the main interface between the ASC and the astronomical community. The facilities provided by the ASC to help potential guest observers will be reviewed in this presentation, including how to: learn about the satellite and instruments, plan observations, access our help-desk.

  18. Nutrition support in surgical oncology.

    PubMed

    Huhmann, Maureen B; August, David A

    2009-01-01

    This review article, the second in a series of articles to examine the American Society for Parenteral and Enteral Nutrition (A.S.P.E.N.) Guidelines for the Use of Parenteral and Enteral Nutrition in Adult and Pediatric Patients, evaluates the evidence related to the use of nutrition support in surgical oncology patients. Cancer patients develop complex nutrition issues. Nutrition support may be indicated in malnourished cancer patients undergoing surgery, depending on individual patient characteristics. As with the first article in this series, this article provides background concerning nutrition issues in cancer patients, as well as discusses the role of nutrition support in the care of surgical cancer patients. The goal of this review is to enrich the discussion contained in the clinical guidelines as they relate to recommendations made for surgical patients, cite the primary literature more completely, and suggest updates to the guideline statements in light of subsequently published studies. PMID:19605805

  19. Support systems design and analysis

    NASA Technical Reports Server (NTRS)

    Ferguson, R. M.

    1985-01-01

    The integration of Kennedy Space Center (KSC) ground support systems with the new launch processing system and new launch vehicle provided KSC with a unique challenge in system design and analysis for the Space Transportation System. Approximately 70 support systems are controlled and monitored by the launch processing system. Typical systems are main propulsion oxygen and hydrogen loading systems, environmental control life support system, hydraulics, etc. An End-to-End concept of documentation and analysis was chosen and applied to these systems. Unique problems were resolved in the areas of software analysis, safing under emergency conditions, sampling rates, and control loop analysis. New methods of performing End-to-End reliability analyses were implemented. The systems design approach selected and the resolution of major problem areas are discussed.

  20. [Mental health support for nurses].

    PubMed

    Fukushima, Yoshie

    2012-01-01

    Burnout specific to human service workers has been reported in the U.S. in the 1970s. Since then, such burnout has become widely known and the mental health of nurses has attracted attention. Stressors in the work environment and complexity have increased with advancement in increasingly complicated medical care. One of the major roles of a psychiatric liaison nurse is to provide support to improve the mental health of nurses. In our hospital, a psychiatric liaison nurse has a staff position under the direct supervision of the director of the nursing department but operates outside the chain of command. A psychiatric liaison nurse is not involved in the performance review of nurses. Thus, the nursing staff and the nursing manager can discuss their problems with the psychiatric liaison nurse without risks. Psychiatric liaison nurses provide support as counselors through individual and group interviews so that nurses can become re-energized about their work. In addition, psychiatric liaison nurses provide consultations and education. They perform coordination function to organize an environment to promote consultations regarding nurse support to the staff nurses and the nursing manager and to promote support by supervisors. For support after reinstatement of a nurse following a medical leave, it is particularly important to work with not only the individual nurse but also the entire nursing team. In our hospital, newly graduated nurses are given the GHQ-28 after one month of employment to assess the support they might need. In our study, nurses with high risks were divided into a group with a score of at least 6 points but less than 10 points and a group with a score of at least 10 points. The group with at least 10 points had significantly higher rates of leave of absence and resignation. Thus, early intervention was thought to be necessary in newly graduated nurses with a score of at least 10 points in the GHQ. PMID:22712205

  1. Automating hypertext for decision support

    NASA Technical Reports Server (NTRS)

    Bieber, Michael

    1990-01-01

    A decision support system (DSS) shell is being constructed that can support applications in a variety of fields, e.g., engineering, manufacturing, finance. The shell provides a hypertext-style interface for 'navigating' among DSS application models, data, and reports. The traditional notion of hypertext had to be enhanced. Hypertext normally requires manually, pre-defined links. A DSS shell, however, requires that hypertext connections to be built 'on the fly'. The role of hypertext is discussed in augmenting DSS applications and the decision making process. Also discussed is how hypertext nodes, links, and link markers tailored to an arbitrary DSS application were automatically generated.

  2. Supporting collaborative computing and interaction

    SciTech Connect

    Agarwal, Deborah; McParland, Charles; Perry, Marcia

    2002-05-22

    To enable collaboration on the daily tasks involved in scientific research, collaborative frameworks should provide lightweight and ubiquitous components that support a wide variety of interaction modes. We envision a collaborative environment as one that provides a persistent space within which participants can locate each other, exchange synchronous and asynchronous messages, share documents and applications, share workflow, and hold videoconferences. We are developing the Pervasive Collaborative Computing Environment (PCCE) as such an environment. The PCCE will provide integrated tools to support shared computing and task control and monitoring. This paper describes the PCCE and the rationale for its design.

  3. Shuttle extravehicular life support equipment

    NASA Technical Reports Server (NTRS)

    Sutton, J. G.

    1973-01-01

    A Shuttle EVA/IVA Requirements Study was conducted by Hamilton Standard for NASA. The objectives of this study were to establish a baseline EVA approach for Shuttle and to prepare requirements for the EVA equipment required to support these operations. This paper presents the results of the EVA life support requirements definition effort and defines candidate configurations which meet these requirements. Various subsystem and system concepts were identified and evaluated to determine the most desirable approaches. Both independent and umbilical configurations are considered. Because certain EVA missions could involve contamination-sensitive payloads, the impact of integrating noncontaminating equipment is also considered.

  4. Memory function and supportive technology

    PubMed Central

    Charness, Neil; Best, Ryan; Souders, Dustin

    2013-01-01

    Episodic and working memory processes show pronounced age-related decline, with other memory processes such as semantic, procedural, and metamemory less affected. Older adults tend to complain the most about prospective and retrospective memory failures. We introduce a framework for deciding how to mitigate memory decline using augmentation and substitution and discuss techniques that change the user, through mnemonics training, and change the tool or environment, by providing environmental support. We provide examples of low-tech and high-tech memory supports and discuss constraints on the utility of high-tech systems including effectiveness of devices, attitudes toward memory aids, and reliability of systems. PMID:24379752

  5. The impact of support received and support provision on changes in perceived social support among older adults.

    PubMed

    Tyler, Kimberly A

    2006-01-01

    The current study uses longitudinal data from the 1993 U.S. Midwest floods to examine the influence of support received and support provision on changes in perceived social support among older adults exposed to an acute stressor. Results indicated that flood exposure and higher levels of social support at Time 1 were positively associated with both receiving social support and providing social support specific to the food. Individuals with higher levels of support provision and received support in turn reported higher levels of perceived support post disaster. Women were more likely to have received flood specific support and to have perceived higher social support post flood. This study provides support and elaboration of earlier findings that link disaster exposure to post-disaster changes in perceived social support. PMID:16454481

  6. Quality user support supporting quality users. [Historical trends and developments in computer support in the oil and gas industry

    SciTech Connect

    Woolley, T.C.

    1994-10-01

    This paper describes how Oryx Energy Co. addressed problems and opportunities created by the explosive growth in computing power and needs coupled with industry contraction. A successful user-support strategy is described. Characteristics of the program include (1) client-driven support, (2) empowerment of highly skilled professionals to fill the support role, (3) routine and ongoing modification of the support plan, (4) use of the support assignment to create highly trained advocates on the line, and (5) integration of the support role to the reservoir management team. Results of the plan include a highly trained work force, stakeholder teams that include support personnel, and global support from a centralized support organization.

  7. Louisiana Migrant Education Support Services.

    ERIC Educational Resources Information Center

    Smith, Billie Jean

    Prepared for school directors, social workers, counselors, recruiters, teachers, and migrant supporters, this booklet presents practical information that can be used to assist Louisiana's migrant children and their families in the areas of health, clothing, nutrition, education, and family services. Information given pertains to: the Community…

  8. Supporting the GLAST User Community

    NASA Technical Reports Server (NTRS)

    Band, David L.

    2004-01-01

    The Gamma-ray Large Area Space Telescope (GLAST) Science Support Center (GSSC) is the scientific community's interface with GLAST. The GSSC will provide data, analysis software and documentation. In addition, the GSSC will administer the guest investigator program for NASA HQ. Consequently, the GSSC will provide proposal preparation tools to assist proposers in assessing the feasibility of observing sources of interest.

  9. Supporting Foster Parents: Caring Voices.

    ERIC Educational Resources Information Center

    Hudson, Pete; Levasseur, Karen

    2002-01-01

    This study used mailed questionnaires to obtain 66 foster parents' views on the supports needed to maintain their caring role. An overarching finding was the need for respect and recognition, manifested in many ways, which appeared to be in short supply. The presence of several ambiguities in the relationships between agency, children in care, and…

  10. Viscoelastic cushion for patient support

    NASA Technical Reports Server (NTRS)

    Sauers, D. G.

    1971-01-01

    Flexible container, filled with liquid, provides supportive device which conforms to patient's anatomy. Uniform cushion pressure prevents formation of decubitus ulcers, while the porous sponge substructure damps fluid movement through cushion response so that patient is not dumped when his weight shifts.