Science.gov

Sample records for systems preliminary survey

  1. Optimal systems of geoscience surveying A preliminary discussion

    NASA Astrophysics Data System (ADS)

    Shoji, Tetsuya

    2006-10-01

    In any geoscience survey, each survey technique must be effectively applied, and many techniques are often combined optimally. An important task is to get necessary and sufficient information to meet the requirement of the survey. A prize-penalty function quantifies effectiveness of the survey, and hence can be used to determine the best survey technique. On the other hand, an information-cost function can be used to determine the optimal combination of survey techniques on the basis of the geoinformation obtained. Entropy is available to evaluate geoinformation. A simple model suggests the possibility that low-resolvability techniques are generally applied at early stages of survey, and that higher-resolvability techniques should alternate with lower-resolvability ones with the progress of the survey.

  2. Experience base for Radioactive Waste Thermal Processing Systems: A preliminary survey

    SciTech Connect

    Mayberry, J.; Geimer, R.; Gillins, R.; Steverson, E.M.; Dalton, D. ); Anderson, G.L. )

    1992-04-01

    In the process of considering thermal technologies for potential treatment of the Idaho National Engineering Laboratory mixed transuranic contaminated wastes, a preliminary survey of the experience base available from Radioactive Waste Thermal Processing Systems is reported. A list of known commercial radioactive waste facilities in the United States and some international thermal treatment facilities are provided. Survey focus is upon the US Department of Energy thermal treatment facilities. A brief facility description and a preliminary summary of facility status, and problems experienced is provided for a selected subset of the DOE facilities.

  3. Environmental Survey preliminary report

    SciTech Connect

    Not Available

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Sandia National Laboratories conducted August 17 through September 4, 1987. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Sandia National Laboratories-Albuquerque (SNLA). The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SNLA, and interviews with site personnel. 85 refs., 49 figs., 48 tabs.

  4. Preliminary models of the resonant trans-Neptunian populations from the Outer Solar System Origins Survey

    NASA Astrophysics Data System (ADS)

    Volk, Kathryn; Gladman, Brett; Murray-Clay, Ruth; Lawler, Samantha

    2014-11-01

    The dynamical history of the solar system’s giant planets left its signature in the orbital distribution trans-Neptunian objects (TNOs). In particular, the population of resonant TNOs is crucial to understanding Neptune’s orbital evolution in the early solar system. Resonant TNOs are subject to complicated detection biases, so estimating the intrinsic resonant TNO population from observations requires a well-characterized survey. We present preliminary models and population estimates for the resonant TNOs based on detections from the first 25% of the Outer Solar System Origins Survey (OSSOS, see abstract by Gladman et al). We discuss small improvements that need to be made to the Canada-France Ecliptic Plane Survey models for the 3:2, 2:1, and 5:2 resonances (Gladman et al 2012) in order to match the full data set. We will discuss some puzzles in the orbital distributions inside of these resonances which appear to be increasingly statistically significant. We demonstrate improvements in the 3:2 resonance mode that will be possible with future OSSOS observations which are expected to increase the total number of well-characterized 3:2 objects by a factor of a few over the Canada-France Ecliptic Plane Survey. The improved resonance models from OSSOS will be a useful lever arm on the processes by which the resonances were filled.

  5. Knowledge based systems: A preliminary survey of selected issues and techniques

    NASA Technical Reports Server (NTRS)

    Dominick, Wayne D. (Editor); Kavi, Srinu

    1984-01-01

    It is only recently that research in Artificial Intelligence (AI) is accomplishing practical results. Most of these results can be attributed to the design and use of expert systems (or Knowledge-Based Systems, KBS) - problem-solving computer programs that can reach a level of performance comparable to that of a human expert in some specialized problem domain. But many computer systems designed to see images, hear sounds, and recognize speech are still in a fairly early stage of development. In this report, a preliminary survey of recent work in the KBS is reported, explaining KBS concepts and issues and techniques used to construct them. Application considerations to construct the KBS and potential KBS research areas are identified. A case study (MYCIN) of a KBS is also provided.

  6. Preliminary models of the resonant transneptunian populations from the Outer Solar System Origins Survey

    NASA Astrophysics Data System (ADS)

    Volk, K.; Gladman, B.; Murray-Clay, R.; Lawler, S.

    2014-07-01

    The dynamical history of our solar system's giant planets left its signature in the orbital distribution of small bodies in the transneptunian region. The outer solar system's dynamical history is particularly important in the origin and distribution of the transneptunian objects (TNOs) in Neptune's mean-motion resonances. Understanding the current population of resonant TNOs is crucial to understanding Neptune's orbital evolution in the early solar system. However, resonant TNOs are subject to complicated detection biases due to the resonant nature of their orbits. In addition to the usual biases due to distance and ecliptic latitude, resonant objects only come to perihelion at a specific range of longitude relative to Neptune (see Gladman et al. 2012, Lawler et al. 2013). Estimating the intrinsic resonant TNO population from observations requires a well-characterized survey so these biases can be accounted for. The Outer Solar System Origins Survey (OSSOS), which began observations in February 2013, will provide a sample of well-characterized resonant TNOs which can be used to model the intrinsic resonant populations. We present preliminary models of the resonant TNOs based on detections from the first two blocks of OSSOS observations. We show that the Canada-France Ecliptic Plane Survey models of the 3:2, 2:1, and 5:2 resonances (Gladman et al. 2012) are consistent with the OSSOS observations so far. For reference, the figure shows the 3:2 resonance model from Gladman et al. 2012 with the locations of the first two OSSOS blocks. We will discuss improvements in the 3:2 resonance model that will be possible with future OSSOS observations which are expected to increase the total number of well-characterized 3:2 objects by a factor of a few over the Canada-France Ecliptic Plane Survey.

  7. Surveying System

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Sunrise Geodetic Surveys are setting up their equipment for a town survey. Their equipment differs from conventional surveying systems that employ transit rod and chain to measure angles and distances. They are using ISTAC Inc.'s Model 2002 positioning system, which offers fast accurate surveying with exceptional signals from orbiting satellites. The special utility of the ISTAC Model 2002 is that it can provide positioning of the highest accuracy from Navstar PPS signals because it requires no knowledge of secret codes. It operates by comparing the frequency and time phase of a Navstar signal arriving at one ISTAC receiver with the reception of the same set of signals by another receiver. Data is computer processed and translated into three dimensional position data - latitude, longitude and elevation.

  8. Astor Pass Seismic Surveys Preliminary Report

    SciTech Connect

    Louie, John; Pullammanappallil, Satish; Faulds, James; Eisses, Amy; Kell, Annie; Frary, Roxanna; Kent, Graham

    2011-08-05

    In collaboration with the Pyramid Lake Paiute Tribe (PLPT), the University of Nevada, Reno (UNR) and Optim re-processed, or collected and processed, over 24 miles of 2d seismic-reflection data near the northwest corner of Pyramid Lake, Nevada. The network of 2d land surveys achieved a near-3d density at the Astor Pass geothermal prospect that the PLPT drilled during Nov. 2010 to Feb. 2011. The Bureau of Indian Affairs funded additional seismic work around the Lake, and an extensive, detailed single-channel marine survey producing more than 300 miles of section, imaging more than 120 ft below the Lake bottom. Optim’s land data collection utilized multiple heavy vibrators and recorded over 200 channels live, providing a state-of-the-art reflection-refraction data set. After advanced seismic analysis including first-arrival velocity optimization and prestack depth migration, the 2d sections show clear fault-plane reflections, in some areas as deep as 4000 ft, tying to distinct terminations of the mostly volcanic stratigraphy. Some lines achieved velocity control to 3000 ft depth; all lines show reflections and terminations to 5000 ft depth. Three separate sets of normal faults appear in an initial interpretation of fault reflections and stratigraphic terminations, after loading the data into the OpendTect 3d seismic visualization system. Each preliminary fault set includes a continuous trace more than 3000 ft long, and a swarm of short fault strands. The three preliminary normal-fault sets strike northerly with westward dip, northwesterly with northeast dip, and easterly with north dip. An intersection of all three fault systems documented in the seismic sections at the end of Phase I helped to locate the APS-2 and APS-3 slimholes. The seismic sections do not show the faults connected to the Astor Pass tufa spire, suggesting that we have imaged mostly Tertiary-aged faults. We hypothesize that the Recent, active faults that produced the tufa through hotspring

  9. PRELIMINARY RESULTS FROM NEOWISE: AN ENHANCEMENT TO THE WIDE-FIELD INFRARED SURVEY EXPLORER FOR SOLAR SYSTEM SCIENCE

    SciTech Connect

    Mainzer, A.; Bauer, J.; Masiero, J.; Eisenhardt, P.; Grav, T.; Cutri, R. M.; Dailey, J.; Alles, R.; Beck, R.; Brandenburg, H.; Conrow, T.; Evans, T.; Fowler, J.; Jarrett, T.; McMillan, R. S.; Wright, E.; Walker, R.; Jedicke, R.; Tholen, D.; Spahr, T.

    2011-04-10

    The Wide-field Infrared Survey Explorer (WISE) has surveyed the entire sky at four infrared wavelengths with greatly improved sensitivity and spatial resolution compared to its predecessors, the Infrared Astronomical Satellite and the Cosmic Background Explorer. NASA's Planetary Science Division has funded an enhancement to the WISE data processing system called 'NEOWISE' that allows detection and archiving of moving objects found in the WISE data. NEOWISE has mined the WISE images for a wide array of small bodies in our solar system, including near-Earth objects (NEOs), Main Belt asteroids, comets, Trojans, and Centaurs. By the end of survey operations in 2011 February, NEOWISE identified over 157,000 asteroids, including more than 500 NEOs and {approx}120 comets. The NEOWISE data set will enable a panoply of new scientific investigations.

  10. A preliminary area survey of neutron radiation levels associated with the NASA variable energy cyclotron horizontal neutron delivery system

    NASA Technical Reports Server (NTRS)

    Roberts, W. K.; Leonard, R. F.

    1976-01-01

    The 25 MeV deuteron beam from the NASA variable energy cyclotron incident on a thick beryllium target will deliver a tissue neutron dose rate of 2.14 rad micron A-min at a source to skin distance of 125 cm. A neutron survey of the existing hallways with various shielding configurations made during operating of the horizontal neutron delivery system indicates that minimal amounts of additional neutron shielding material are required to provide a low level radiation environment within a self-contained neutron therapy control station. Measurements also indicate that the primary neutron distribution delivered by a planned vertical delivery system will be minimally perturbed by neutrons backscattered from the floor.

  11. Preliminary Results of the 1979 Doctorate Employment Survey.

    ERIC Educational Resources Information Center

    Stapp, Joy; Fulcher, Robert

    Preliminary results of the 1979 Doctorate Employment Survey, which is designed to assess the employment experiences of new doctorates in psychology, are briefly described. The survey focuses on employment status, employment settings, and salaries, and is the first survey designed to allow respondents to provide detailed information on their…

  12. Environmental Survey preliminary report, Sandia National Laboratories, Livermore, California

    SciTech Connect

    Not Available

    1988-01-01

    This report contains the preliminary findings based on the first phase of an Environmental Survey at the Department of Energy (DOE) Sandia National Laboratories Livermore (SNLL), located at Livermore, California. The Survey is being conducted by DOE's Office of Environment, Safety and Health. The SNLL Survey is a portion of the larger, comprehensive DOE Environmental Survey encompassing all major operating facilities of DOE. The DOE Environmental Survey is one of a series of initiatives announced on September 18, 1985, by Secretary of Energy, John S. Herrington, to strengthen the environmental, safety, and health programs and activities within DOE. The purpose of the Environmental Survey is to identify, via a no fault'' baseline Survey of all the Department's major operating facilities, environmental problems and areas of environmental risk. The identified problem areas will be prioritized on a Department-wide basis in order of importance in 1989. The findings in this report are subject to modification based on the results from the Sampling and Analysis Phase of the Survey. The findings are also subject to modification based on comments from the Albuquerque Operations Office concerning the technical accuracy of the findings. The modified preliminary findings and any other appropriate changes will be incorporated into an Interim Report. The Interim Report will serve as the site-specific source for environmental information generated by the Survey, and ultimately as the primary source of information for the DOE-wide prioritization of environmental problems in the Survey Summary Report. 43 refs., 21 figs., 24 tabs.

  13. Preliminary Centaur Systems Analysis

    NASA Technical Reports Server (NTRS)

    Maronde, R. G.; Holmes, J. K.; Iwasaki, R. S.

    1981-01-01

    The Centaur is stored in the Orbiter payload bay on the Centaur Integrated Support System (CISS). The CISS not only cradles the Centaur prior to deployment but also provides any signal conditioning required to make the Centaur/Orbiter hardwire interfaces compatible. In addition, the CISS provides other Centaur functions such as controlling all the avionics safety features and providing all the helium supplies for tank pressurizations. Problems associated with a Centaur design concept using a transponder and two switchable antennas are defined. Solutions to these problems are presented.

  14. Environmental Survey preliminary report, Fermi National Accelerator Laboratory, Batavia, Illinois

    SciTech Connect

    Not Available

    1988-10-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Fermi National Accelerator Laboratory (Fermilab), conducted September 14 through 25, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual participants for the Survey team are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Fermilab. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at Fermilab, and interviews with site personnel. 110 refs., 26 figs., 41 tabs.

  15. The Communicative Effectiveness Survey: Preliminary Evidence of Construct Validity

    ERIC Educational Resources Information Center

    Donovan, Neila J.; Kendall, Diane L.; Young, Mary Ellen; Rosenbek, John C.

    2008-01-01

    Purpose: To provide preliminary evidence of the construct validity of the Communicative Effectiveness Survey (CES) for individuals with dysarthria and idiopathic Parkinson's disease (PD). Method: In a prospective, quasi-experimental design, 25 participants each were assigned to 3 groups (N = 75): PD and dysarthria, non-PD and no dysarthria, and PD…

  16. Environmental Survey preliminary report, Solar Energy Research Institute, Golden, Colorado

    SciTech Connect

    Not Available

    1988-10-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the US Department of Energy's (DOE) Solar Energy Research Institute (SERI), conducted December 14 through 18, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by private contractors. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with SERI. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SERI, and interviews with site personnel. 33 refs., 22 figs., 21 tabs.

  17. Safe Schools Survey. Post-Secondary Student Survey. Preliminary Results.

    ERIC Educational Resources Information Center

    Minnesota State Office of the Attorney General, St. Paul.

    A survey of 706 randomly sampled students at institutions of postsecondary education in Minnesota examined students' perceptions of violence and safety at their schools. Overall findings indicated that the majority of students had not been victims of violent acts and generally felt safe at their institutions. However, many respondents indicated…

  18. Environmental Survey preliminary report, Pinellas Plant, Largo, Florida

    SciTech Connect

    Not Available

    1987-11-01

    The purpose of this report is to present the preliminary findings made during the Environmental Survey, conducted May 11 through 22, 1987, at the United States Department of Energy (DOE) Pinellas Plant in Largo, Florida. As a Preliminary Report, the contents are subject to revisions, which will be made in a forthcoming Interim Report, based on Albuquerque Operations Office review and comments on technical accuracy, the results of the sampling and analyses, and other information that may come to the Survey team's attention prior to issuance of the Interim Report. The Pinellas Plant is currently operated for DOE by the General Electric Company-Neutron Devices Department (GENDD). The Pinellas Survey is part of the larger DOE-wide Environmental Survey effort announced by Secretary John S. Herrington on September 18, 1985. The purpose of this effort is to identify, via no fault'' baseline Surveys, existing environmental problems are areas of environmental risk at DOE facilities and to rank them on a DOE-wide basis. This ranking will enable DOE to more effectively establish priorities for addressing environmental problems and allocate the resources necessary to correct these problems. Because the Survey is no fault'' and is not an audit,'' it is not designed to identify specific isolated incidents of noncompliance or to analyze environmental management practices. Such incidents and/or management practices will, however, be used in the Survey as a means of identifying existing and potential environmental problems. 55 refs., 37 figs., 37 tabs.

  19. Emetophobia: preliminary results of an internet survey.

    PubMed

    Lipsitz, J D; Fyer, A J; Paterniti, A; Klein, D F

    2001-01-01

    Through electronic mail, we surveyed members of an internet support group for emetophobia (fear of vomiting). Respondents were 50 women and 6 men with a mean age of 31 years. Results suggest that, for this sample, emetophobia is a disorder of early onset and chronic course, with highly persistent and intrusive symptoms. Emetophobia is implicated in social, home-marital, and occupational impairment and it causes significant constriction of leisure activities. Nearly half of women avoided or delayed becoming pregnant. About three quarters of respondents have eating rituals or significantly limit the foods they eat. Respondents describe other problems such as depression, panic attacks, social anxiety, compulsions, and frequent history of childhood separation anxiety. PMID:11668669

  20. Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania

    SciTech Connect

    Not Available

    1988-09-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

  1. Environmental Survey preliminary report, Feed Materials Production Center, Fernald, Ohio

    SciTech Connect

    Not Available

    1987-03-01

    This report presents the preliminary findings from the first phase of the environmental survey of the United States Department of Energy (DOE) Feed Materials Production Center (FMPC), conducted June 16 through 27, 1986. The survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the survey is to identify environmental problems and areas of environmental risk associated with the FMPC. The survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the survey involves the review of existing site environmental data, observations of the operations carried on at FMPC, and interviews with site personnel. The survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its onsite activities. The Sampling and Analysis Plan will be executed by a DOE national laboratory or a support contractor. When completed, the results will be incorporated into the FMPC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the FMPC survey. 41 refs., 20 figs., 25 tabs.

  2. Environmental Survey preliminary report, Brookhaven National Laboratory, Upton, New York

    SciTech Connect

    Not Available

    1988-06-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Brookhaven National Laboratory (BNL) conducted April 6 through 17, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with BNL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at BNL, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing specific environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by Oak Ridge National Laboratory. When completed, the results will be incorporated into the BNL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the BNL Survey. 80 refs., 24 figs., 48 tabs.

  3. Environmental Survey preliminary report, Rocky Flats Plant, Golden, Colorado

    SciTech Connect

    Not Available

    1987-06-01

    This report presents the preliminary findings of the Environmental Survey of the United States Department of Energy (DOE), Rocky Flats Plant (RFP), conducted August 11 through 22, 1986. The Survey is being conducted by an multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the RFP. The Survey covers all environmental media and all areas of environmental regulations. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data observations of the operations carried on at RFP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activates. The Sampling and Analysis Plan is being executed by DOE's Oak Ridge National Laboratory. When completed, the results will be incorporated into the RFP Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the RFP Survey. 75 refs., 24 figs., 33 tabs.

  4. Environmental Survey preliminary report, Ames Laboratory, Ames, Iowa

    SciTech Connect

    Not Available

    1989-03-01

    This report presents the preliminary findings of the first phase of the environmental Survey of the United States Department of Energy's (DOE) Ames Laboratory, conducted April 18 through 22, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are being supplied by private contractors. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Ames Laboratory. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Ames Laboratory, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The S A plan is being developed by the Idaho National Engineering Laboratory. When S A is completed, the results will be incorporated into the Ames Laboratory Environmental Survey findings for inclusion in the Environmental Survey Summary Report. 60 refs., 13 figs., 20 tabs.

  5. Environmental Survey preliminary report, Pantex Facility, Amarillo, Texas

    SciTech Connect

    Not Available

    1987-09-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Pantex Facility, conducted November 3 through 14, 1986.The Survey is being conducted by an interdisciplinary team of environmental specialist, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Pantex Facility. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Pantex Facility, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by the Oak Ridge National Laboratory. When completed, the results will be incorporated into the Pantex Facility Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey for the Pantex Facility. 65 refs., 44 figs., 27 tabs.

  6. Environmental Survey preliminary report, Kansas City Plant, Kansas City, Missouri

    SciTech Connect

    Not Available

    1988-01-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE), Kansas City Plant (KCP), conducted March 23 through April 3, 1987. The Survey is being conducted by a multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the KCP. The Survey covers all environmental media and all areas of environmental regulations. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data observations of the operations performed at the KCP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by DOE's Argonne National Laboratory. When completed, the results will be incorporated into the KCP Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the KCP Survey. 94 refs., 39 figs., 55 tabs.

  7. Environmental Survey preliminary report, Nevada Test Site, Mercury, Nevada

    SciTech Connect

    Not Available

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Nevada Test Site (NTS), conducted June 22 through July 10, 1987. The Survey is being conducted by a multidisciplinary team of environmental specialists led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the NTS. The Survey covers all environment media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations and activities performed at the NTS, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by the Battelle Columbus Division under contract with DOE. When completed, the results will be incorporated into the NTS Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the NTS Survey. 165 refs., 42 figs., 52 tabs.

  8. Environmental Survey preliminary report, Argonne National Laboratory, Argonne, Illinois

    SciTech Connect

    Not Available

    1988-11-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Argonne National Laboratory (ANL), conducted June 15 through 26, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with ANL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at ANL, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the S A results will be incorporated into the Argonne National Laboratory Environmental Survey findings for inclusion in the Environmental Survey Summary Report. 75 refs., 24 figs., 60 tabs.

  9. Environmental Survey preliminary report, Y-12 Plant, Oak Ridge, Tennessee

    SciTech Connect

    Not Available

    1987-11-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the Department of Energy (DOE), Y-12 Plant, conducted November 10 through 21 and December 9 through 11, 1986. This Survey is being conducted by a multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Y-12 Plant. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at Y-12, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by DOE's Argonne National Laboratory. When completed, the results will be incorporated into the Y-12 Plant Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Y-12 Plant Survey. 80 refs., 76 figs., 61 tabs.

  10. Environmental Survey preliminary report, Stanford Linear Accelerator Center, Stanford, California

    SciTech Connect

    Not Available

    1988-07-01

    This report presents the preliminary findings from the first phase of the Survey of the US Department of Energy (DOE) Stanford Linear Accelerator Center (SLAC) at Stanford, California, conducted February 29 through March 4, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the SLAC. The Survey covers all environmental media and all areas of environmental regulation and is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations at the SLAC, and interviews with site personnel. The Survey team is developing a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the SLAC facility. The Interim Report will reflect the final determinations of the SLAC Survey. 95 refs., 25 figs., 25 tabs.

  11. Environmental Survey preliminary report, Hanford Site, Richland, Washington

    SciTech Connect

    Not Available

    1987-08-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Hanford Site, conducted August 18 through September 5, 1986. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Hanford Site. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Hanford Site, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the Hanford Site. The Interim Report will reflect the final determinations of the Hanford Site Survey. 44 refs., 88 figs., 74 tabs.

  12. Environmental Survey preliminary report, Savannah River Plant, Aiken, South Carolina

    SciTech Connect

    Not Available

    1987-08-01

    This report contains the preliminary findings based on the first phase of an Environmental Survey at the Department of Energy (DOE) Savannah River Plant (SRP), located at Aiken, South Carolina. The Survey is being conducted by DOE's Office of Environment, Safety and Health. The following topics are discussed: general site information; air, soil, surface water and ground water; hydrogeology; waste management; toxic and chemical materials; release of tritium oxides; radioactivity in milk; contamination of ground water and wildlife; pesticide use; and release of radionuclides into seepage basins. 149 refs., 44 figs., 53 tabs.

  13. Environmental Survey preliminary report, Lawrence Livermore National Laboratory, Livermore, California

    SciTech Connect

    Not Available

    1987-12-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the Department of Energy (DOE) Lawrence Livermore National Laboratory (LLNL), conducted December 1 through 19, 1986. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with LLNL. The Survey covers all environmental media all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at LLNL, and interviews with site personnel. A Sampling and Analysis Plan was developed to assist in further assessing certain of the environmental problems identified during performance of on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory. When completed, the results will be incorporated into the LLNL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the LLNL Survey. 70 refs., 58 figs., 52 tabs.,

  14. Environmental Survey preliminary report, Portsmouth Uranium Enrichment Complex, Piketon, Ohio

    SciTech Connect

    Not Available

    1987-08-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Portsmouth Uranium Enrichment Complex (PUEC), conducted August 4 through August 15, 1986. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Team specialists are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at PUEC, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by Argonne National Laboratory. When completed, the results will be incorporated into the PUEC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the PUEC Survey. 55 refs., 22 figs., 21 tabs.

  15. Environmental Survey preliminary report, Lawrence Berkeley Laboratory, Berkeley, California

    SciTech Connect

    Not Available

    1988-07-01

    The purpose of this report is to present the preliminary findings made during the Environmental Survey, February 22--29, 1988, at the US Department of Energy (DOE) Lawrence Berkeley Laboratory (LBL) in Berkeley, California. The University of California operates the LBL facility for DOE. The LBL Survey is part of the larger DOE-wide Environmental Survey announced by Secretary John S. Herrington on September 18, 1985. The purpose of this effort is to identify, via no fault'' baseline Surveys, existing environmental problems and areas of environmental risk at DOE facilities, and to rank them on a DOE wide basis. This ranking will enable DOE to more effectively establish priorities for addressing environmental problems and allocate the resources necessary to correct them. Because the Survey is no fault'' and is not an audit,'' it is not designed to identify specific isolated incidents of noncompliance or to analyze environmental management practices. Such incidents and/or management practices will, however, be used in the Survey as a means of identifying existing and potential environmental problems. The LBL Survey was conducted by a multidisciplinary team of technical specialists headed and managed by a Team Leader and Assistant Team Leader from DOE's Office of Environmental Audit. A complete list of the LBL Survey participants and their affiliations is provided in Appendix A. 80 refs., 27 figs., 37 tabs.

  16. Preliminary survey report, Didier Taylor Refractories Corporation Plant, Newtown, Ohio

    SciTech Connect

    Mahon, R.D.

    1981-10-20

    An on-site visit was made to the Didier Taylor Refractories Corporation located in Newtown, Ohio for the purpose of evaluating control methods instituted to protect workers from hazardous conditions. Raw materials were received at this location in bags and canisters. The bags were opened in an area with dual-pull exhaust ventilation from two sides. Several St. Regis single spout packers with local exhaust systems were also used at this facility. All exhaust ducts connected to a large Kirk and Blum dry-bag collector located adjacent to the building. Some molding and casting work was done at this facility, but no particularly significant health hazard controls were noted for the process. The product line included bricks, patches, ramming mixes, cements, castables, plastics, and miscellaneous items. Plaster of paris and thermo setting plastics were used as mold materials. Slip mixes involved a wide range of chemical compounds. Plans were made to conduct a walk-through preliminary-type survey of the location at a later date. An in-depth assessment of portions of the facility and operations may be decided upon at that time.

  17. [[Preliminary report on China's first phase fertility survey

    PubMed

    1986-03-29

    Preliminary results of a 1985 fertility survey conducted in the city of Shanghai and in the provinces of Hebei and Shanxi in China are reported. The survey concerned married women under the age of 50. The sample sizes were 0.5 per 1,000, 1 per 1,000, and 2 per 1,000 of the target populations of Shanxi, Hebei, and Shanghai, respectively. Topics covered included marital histories, fertility, pregnancy, and breast-feeding. General results of the survey are outlined, and particular attention is given to findings concerning marital status. It is found that the marriage rate is high, the divorce rate is low, and the rate of early marriage is decreasing. PMID:12314963

  18. Environmental survey preliminary report, Mound Plant, Miamisburg, Ohio

    SciTech Connect

    Not Available

    1987-03-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Mound Plant, conducted August 18 through 29, 1986. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Mound Plant. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Mound Plant, and interviews with site personnel. The Survey found no environmental problems at the Mound Plant that represent an immediate threat to human life. The environmental problems identified at the Mound Plant by the Survey confirm that the site is confronted with a number of environmental problems which are by and large a legacy from past practices at a time when environmental problems were less well understood. Theses problems vary in terms of their magnitude and risk, as described in this report. Although the sampling and analysis performed by the Mound Plant Survey will assist in further identifying environmental problems at the site, a complete understanding of the significance of some of the environmental problems identified requires a level of study and characterization that is beyond the scope of the Survey. Actions currently under way or planned at the site, particularly the Phase II activities of the Comprehensive Environmental Analysis and Response Program (CEARP) as developed and implemented by the Albuquerque Operations Office, will contribute toward meeting this requirement. 85 refs., 24 figs., 20 tabs.

  19. Business System Planning Project, Preliminary System Design

    SciTech Connect

    EVOSEVICH, S.

    2000-10-30

    CH2M HILL Hanford Group, Inc. (CHG) is currently performing many core business functions including, but not limited to, work control, planning, scheduling, cost estimating, procurement, training, and human resources. Other core business functions are managed by or dependent on Project Hanford Management Contractors including, but not limited to, payroll, benefits and pension administration, inventory control, accounts payable, and records management. In addition, CHG has business relationships with its parent company CH2M HILL, U.S. Department of Energy, Office of River Protection and other River Protection Project contractors, government agencies, and vendors. The Business Systems Planning (BSP) Project, under the sponsorship of the CH2M HILL Hanford Group, Inc. Chief Information Officer (CIO), have recommended information system solutions that will support CHG business areas. The Preliminary System Design was developed using the recommendations from the Alternatives Analysis, RPP-6499, Rev 0 and will become the design base for any follow-on implementation projects. The Preliminary System Design will present a high-level system design, providing a high-level overview of the Commercial-Off-The-Shelf (COTS) modules and identify internal and external relationships. This document will not define data structures, user interface components (screens, reports, menus, etc.), business rules or processes. These in-depth activities will be accomplished at implementation planning time.

  20. Adak Island, Alaska, Microearthquake survey: Preliminary Hypocenter Determinations

    SciTech Connect

    Lange, Arthur L.; Avramenko, Walter

    1982-11-05

    these 24 were locatable. Utilizing a 5 km/sec constant velocity earth model, the hypocenters define a structure dipping north-northwestward toward the Bering Sea, beneath Mt. Adagdak. many of the events took place beneath the Adagdak peninsula in an area in which hot springs discharge and where other geophysical evidences suggest a geothermal reservoir. A similar NNW-dipping fault plane was deduced from a 9-day microearthquake survey conducted in 1974. At that time all of the activity occurred beneath the sea. the projected surface trace lies NNW of that deduced form the present survey. It is quite likely that the mapped structure and attendant fractures control a hydrothermal system by providing the necessary permeability for maintaining circulation of hot waters within the upper several kilometers of the surface. Only preliminary analysis of the records fell within the scope of the present project. The work should be supplemented with the application of a locally appropriate earth model, 3D fault-mapping, first-motion studies leading to fault-plane solutions, and computations of event magnitudes.

  1. Survey of CELSS Concepts and Preliminary Research in Japan

    NASA Technical Reports Server (NTRS)

    Ohya, H.; Oshima, T.; Nitta, K.

    1985-01-01

    Agricultural and other experiments relating to the development of a controlled ecological life support system (CELSS) were proposed. The engineering feasibility of each proposal was investigated by a CELSS experiment concept met study group. The CELSS experiment concept to clarify the goals of CELSS and to determine three phases to achieve the goals. The resulting phases, or missions, and preliminary proposals and studies needed to develop a CELSS are described.

  2. The Use of Satellite Delivery Systems in Education in Canada: The Costing of Two Networks and a Preliminary Needs Survey. Volume 1: The Costing of Two Networks.

    ERIC Educational Resources Information Center

    Daniel, John S.; And Others

    This study examines the methodologies and costs of establishing educational delivery systems using satellites currently in orbit or planned. It identifies two operational system scenarios and their predicted costs. One system, the Canadian Universities Satellite System (CUSS), is hypothesized to provide the means of transmitting audio and video…

  3. Alchemical poetry in medieval and early modern Europe: a preliminary survey and synthesis. Part I--Preliminary survey.

    PubMed

    Kahn, Didier

    2010-11-01

    This article provides a preliminary description of medieval and early modern alchemical poetry composed in Latin and in the principal vernacular languages of western Europe. It aims to distinguish the various genres in which this poetry flourished, and to identify the most representative aspects of each cultural epoch by considering the medieval and early modern periods in turn. Such a distinction (always somewhat artificial) between two broad historical periods may be justified by the appearance of new cultural phenomena that profoundly modified the character of early modern alchemical poetry: the ever-increasing importance of the prisca theologia, the alchemical interpretation of ancient mythology, and the rise of neo-Latin humanist poetry. Although early modern alchemy was marked by the appearance of new doctrines (notably the alchemical spiritus mundi and Paracelsianism), alchemical poetry was only superficially modified by criteria of a scientific nature, which therefore appear to be of lesser importance. This study falls into two parts. Part I provides a descriptive survey of extant poetry, and in Part II the results of the survey are analysed in order to highlight such distinctive features as the function of alchemical poetry, the influence of the book market on its evolution, its doctrinal content, and the question of whether any theory of alchemical poetry ever emerged. Part II is accompanied by an index of the authors and works cited in both parts. PMID:21465995

  4. Survey of CELSS concepts and preliminary research in Japan.

    PubMed

    Ohya, H; Oshima, T; Nitta, K

    1984-01-01

    Many agricultural and other experiments relating to the development of a Controlled Ecological Life Support System (CELSS) were proposed by scientists throughout Japan in the fall of 1982. To develop concrete experimental concepts from these proposals, the engineering feasibility of each proposal was investigated by a CELSS experiment concept study group under the support of the National Aerospace Laboratory. The conclusions of the group were described in two documents. Originally, the study group did not clearly define necessary missions leading to the goal of an operational CELSS for spaceflight. Therefore, the CELSS experiment concept study group met again to clarify the goals of CELSS and to determine three phases to achieve the goals. The resulting phases, or missions, and preliminary proposals and studies needed to develop a CELSS are described herein. PMID:11537785

  5. Geophex airborne unmanned survey system

    SciTech Connect

    Won, I.J.; Taylor, D.W.A.

    1995-03-01

    The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This nonintrusive system will provide {open_quotes}stand-off{close_quotes} capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. This system permits two operators to rapidly conduct geophysical characterization of hazardous environmental sites. During a survey, the operators remain remote from, but within visual distance, of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak anomalies can be detected.

  6. Geophex Airborne Unmanned Survey System

    SciTech Connect

    Won, I.J.; Keiswetter, D.

    1995-10-01

    The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This non-intrusive system will provide {open_quotes}stand-off{close_quotes} capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. This system permits rapid geophysical characterization of hazardous environmental sites. During a survey, the operators remain remote from, but within visual distance of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak geophysical anomalies can be detected.

  7. Automated CPX support system preliminary design phase

    NASA Technical Reports Server (NTRS)

    Bordeaux, T. A.; Carson, E. T.; Hepburn, C. D.; Shinnick, F. M.

    1984-01-01

    The development of the Distributed Command and Control System (DCCS) is discussed. The development of an automated C2 system stimulated the development of an automated command post exercise (CPX) support system to provide a more realistic stimulus to DCCS than could be achieved with the existing manual system. An automated CPX system to support corps-level exercise was designed. The effort comprised four tasks: (1) collecting and documenting user requirements; (2) developing a preliminary system design; (3) defining a program plan; and (4) evaluating the suitability of the TRASANA FOURCE computer model.

  8. Survey of Interlibrary Communications Systems.

    ERIC Educational Resources Information Center

    Kenney, Brigitte L.

    The growth and development of library networks increased the need for more rapid interlibrary communication. This survey describes the history, costs and recent developments of various means of interlibrary communication. Extensive references are provided for each area. The communications systems discussed are: surveys, mail, telephone, facsimile,…

  9. Possible Hydrovolcanic Landforms Observed in MOC NA Imagery: A Preliminary Survey

    NASA Technical Reports Server (NTRS)

    Farrand, W. H.; Gaddis, L. R.; Blundell, S.

    2001-01-01

    In a preliminary survey of MOC NA imagery, a number of features resembling table mountains, tuff rings, and near craters have been identified. Their locations and geologic significance will be discussed. Additional information is contained in the original extended abstract.

  10. Preliminary survey and evaluation of nonaquifer thermal energy storage concepts for seasonal storage

    SciTech Connect

    Blahnik, D.E.

    1980-11-01

    Thermal energy storage enables the capture and retention of heat energy (or cold) during one time period for use during another. Seasonal thermal energy storage (STES) involves a period of months between the input and recovery of energy. The purpose of this study was to make a preliminary investigation and evaluation of potential nonaquifer STES systems. Current literature was surveyed to determine the state of the art of thermal energy storage (TES) systems such as hot water pond storage, hot rock storage, cool ice storage, and other more sophisticated concepts which might have potential for future STES programs. The main energy sources for TES principally waste heat, and the main uses of the stored thermal energy, i.e., heating, cooling, and steam generation are described. This report reviews the development of sensible, latent, and thermochemical TES technologies, presents a preliminary evaluation of the TES methods most applicable to seasonal storage uses, outlines preliminary conclusions drawn from the review of current TES literature, and recommends further research based on these conclusions. A bibliography of the nonaquifer STES literature review, and examples of 53 different TES concepts drawn from the literature are provided. (LCL)

  11. Geophex Airborne Unmanned Survey System

    SciTech Connect

    Won, I.L.; Keiswetter, D.

    1995-12-31

    Ground-based surveys place personnel at risk due to the proximity of buried unexploded ordnance (UXO) items or by exposure to radioactive materials and hazardous chemicals. The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This non-intrusive system will provide stand-off capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. During a survey, the operators remain remote from, but within visual distance of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak geophysical anomalies can be detected. The Geophex Airborne Unmanned Survey System (GAUSS) is designed to detect and locate small-scale anomalies at hazardous sites using magnetic and electromagnetic survey techniques. The system consists of a remotely-piloted, radio-controlled, model helicopter (RCH) with flight computer, light-weight geophysical sensors, an electronic positioning system, a data telemetry system, and a computer base-station. The report describes GAUSS and its test results.

  12. Preliminary design of the Kunlun Dark Universe Survey Telescope (KDUST)

    NASA Astrophysics Data System (ADS)

    Yuan, Xiangyan; Cui, Xiangqun; Su, Ding-qiang; Zhu, Yongtian; Wang, Lifan; Gu, Bozhong; Gong, Xuefei; Li, Xinnan

    2013-01-01

    From theoretical analysis and site testing work for 4 years on Dome A, Antarctica, we can reasonably predict that it is a very good astronomical site, as good as or even better than Dome C and suitable for observations ranging from optical to infrared & sub-mm wavelengths. After the Chinese Small Telescope ARray (CSTAR), which was composed of four small fixed telescopes with diameter of 145mm and the three Antarctic Survey Telescopes (AST3) with 500mm entrance diameter, the Kunlun Dark Universe Survey Telescope (KDUST) with diameter of 2.5m is proposed. KDUST will adopt an innovative optical system which can deliver very good image quality over a 2 square degree flat field of view. Some other features are: a fixed focus suitable for different instruments, active optics for miscollimation correction, a lens-prisms that can be used as an atmospheric dispersion corrector or as a very low-dispersion spectrometer when moved in / out of the main optical path without changing the performance of the system, and a compact structure to make easier transportation to Dome A. KDUST will be mounted on a tower with height 15m in order to make a full use of the superb free atmospheric seeing.

  13. Preliminary System Design of the SWRL Financial System.

    ERIC Educational Resources Information Center

    Ikeda, Masumi

    The preliminary system design of the computer-based Southwest Regional Laboratory's (SWRL) Financial System is outlined. The system is designed to produce various management and accounting reports needed to maintain control of SWRL operational and financial activities. Included in the document are descriptions of the various types of system…

  14. HARRISBURG TRI-COUNTY HEALTH MANPOWER SURVEY REPORT. PRELIMINARY.

    ERIC Educational Resources Information Center

    RATNER, MURIEL

    THE HARRISBURG AREA COMMUNITY COLLEGE COOPERATED WITH TWO HOSPITALS IN A SURVEY OF THE AREA'S NEEDS FOR HEALTH TECHNICIANS. DATA, COLLECTED BY QUESTIONNAIRE SURVEYS OF DOCTORS AND DENTISTS AND BY INTERVIEWS WITH ADMINISTRATORS OF HOSPITALS, NURSING HOMES AND PROFESSIONAL ORGANIZATIONS, INDICATED THAT (1) A 60-PERCENT INCREASE IN HEALTH MNAPOWER…

  15. Survey of foreign maglev systems

    SciTech Connect

    He, J.L.; Rote, D.M.; Coffey, H.T.

    1992-07-01

    Magnetic levitation (maglev) transportation systems represent an innovative technology that promises to provide pollution-free, contact-free, high-speed ground transportation for the twenty-first century. Great interest in maglev systems has been developing in the United States over the past two years under the auspices of the US National Maglev Initiative. The objective of the survey presented in this report is to provide the US maglev community with information on various maglev concepts that were developed in foreign countries over the past two decades. The main maglev systems included in the survey are the German Transrapid series and the M-Bahn, the Japanese HSST and MLU series, and the British Birmingham. Each maglev system is introduced and discussed according to its type, historical development, unique features, current status, and future prospects. Advantages and disadvantages of each system are briefly noted.

  16. Preliminary results of microearthquake survey, Northern Adak Island, Alaska

    SciTech Connect

    Mackelprang, Claron E.

    1982-01-01

    Nine MEQ-800 portable seismic systems were emplaced and recordings taken during the 30 day period between September 5 to October 4, 1982. During this interval 190 events were correlated on two or more stations by Mincomp. Twenty four of these, seen on four or more stations and considered to be local in origin, yielded, according to Mincomp, reasonable hypocenters and origin times using a homogeneous earth model having a velocity of 5 km/sec. A plot of these hypocenters showed much of the microearthquake activity recorded during the survey to be located beneath Mt. Adagdak. This is different from the events located by the Butler and Keller (1974) microearthquake survey which placed hypocenters beneath the sea in Andrew Bay north and northwest of Mt. Adagdak. Butler and Keller did project a fault plane to the surface which would project southwest through Mt. Adagdak and Andrew Bay Volcano. ESL hypocenter locations using the layered earth model show many of the identified events to occur on the northeast corner of the island at focal depths of 8-10 km. It is not obvious that the observed events are related to a single active fault. If so, the fault must be at a low dip angle as shown by the least-squares-fit to the data on Figure 3. Alternatively, the majority of the events occurring within a fairly restrictive range of focal depths may be more indicative of a magma chamber and the movement of magma. Further interpretation of the microearthquake data obtained during 1982 is, however, outside the scope of this report. The relatively small error ellipses for hypocenter locations, compared to the distribution of hypocenters shown on Plates V and VI lead us to question the validity of the projection of all hypocenters to define a single fault location and orientation. It is apparent that two or more structures could be indicated by the present data and that these structures intersect near the north end of Adak island. The occurrence of most events in a narrow depth range

  17. Preliminary flight prototype silver ion monitoring system

    NASA Technical Reports Server (NTRS)

    Brady, J.

    1974-01-01

    The design, fabrication, and testing of a preliminary flight prototype silver ion monitoring system based on potentiometric principles and utilizing a solid-state silver sulfide electrode paired with a pressurized double-junction reference electrode housing a replaceable electrolyte reservoir is described. The design provides automatic electronic calibration utilizing saturated silver bromide solution as a silver ion standard. The problem of loss of silver ion from recirculating fluid, its cause, and corrective procedures are reported. The instability of the silver sulfide electrode is discussed as well as difficulties met in implementing the autocalibration procedure.

  18. Environmental Survey preliminary report, Morgantown Energy Technology Center, Morgantown, West Virginia

    SciTech Connect

    Not Available

    1988-06-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Morgantown Energy Technology Center (METC) conducted November 30 through December 4, 1987. In addition, the preliminary findings of the Laramie Project Office (LPO) Survey, which was conducted as part of the METC Survey on January 25 through 29, 1988, are presented in Appendices E and F. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with METC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at METC, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities at METC. The Sampling and Analysis Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the results will be incorporated into the METC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey METC. 60 refs., 28 figs., 43 tabs.

  19. Personnel Systems Survey Standard Report.

    ERIC Educational Resources Information Center

    College and Univ. Personnel Association, Washington, DC. Management Information Systems Council.

    The status of personnel systems at 370 public and private colleges in 1985 is described, based on a College and University Personnel Association survey. Responding schools were classified as two-year, four-year, universities (doctoral-granting institutions), and other (law, medical, and theological schools). For each institutional classification,…

  20. Preliminary design of Viking Armored Gun System

    SciTech Connect

    Gogolewski, R.P.; Cunningham, B.J.

    1990-10-24

    We have completed the preliminary design of our third lightweight armored fighting vehicle -- the Viking Armored Gun System (AGS). The AGS vehicle features a two-man crew, the Ares 75mm Universal Turret System, and the John Deere 4026R Rotary Engine. In the spirit of our earlier AFV designs, our primary concern is to provide the AGS with sufficient firepower and survivability while utilizing off-the-shelf'' sub-systems and components in order to reduce developmental time and acquisition cost. We still envision that prototypic vehicles could be built within a thirty (30) month developmental/demonstration program. We still believe that vehicles of this class should be built and tested soon to assess their full tactical, operational, and strategic utilities.

  1. Preliminary evaluation of the University of South Florida Mobile Data Acquisition System, the Idaho National Engineering Laboratory Versatile Data Acquisition System, and the Autologger Vehicle User Survey System produced by Instrumental Solutions of Ottawa, Canada for the Site Operator Program Field Data Collection

    SciTech Connect

    Kiser, D.M.; Richardson, R.A.

    1993-09-01

    The Electric Vehicle (EV) Site Operator Program, is currently composed of thirteen Site Operators. In addition to operating electric vehicles for demonstration of the technology, the Site Operators also perform operational field testing. Data collected by the programs are input to the Site Operator Database at each site and transmitted, periodically, to the database at the INEL. As the program has expanded, some Site Operators have begun operating vehicles at sites remote from their offices. With the advent of these expanded test programs, it is necessary to consider in-vehicle, automated data acquisition systems. Three of these in-vehicle, data acquisition systems have been designed and constructed: The Mobile Data Acquisition System (MDAS) was designed and constructed by Sigma TecSystems, Inc. located in Tampa, Florida. The Versatile Data Acquisition System (VDAS) was designed and constructed at the INEL under the guidance of the Electric and Hybrid Vehicle (EHV) Program. The AUTOLOGGER Vehicle User Survey System produced by Instrumental Solutions of Ottawa, ON. Because the USF MDAS is a new system proposed for use by the Site Operator Program, the purpose of this report is to provide a preliminary evaluation of the MDAS by comparing the system to the proven VDAS. Data used to perform the comparison was acquired by a review of the MDAS literature provided by the USF, and by a demonstration of the MDAS and its performance, provided by the USF to INEL personnel. A brief discussion of the AUTOLOGGER is also included, for comparison, because it is being used by Southern California Edison (SCE), one of the Site Operator Program participants who recommends the unit as a good system.

  2. Preliminary Results from the Second Caltech-Jodrell Bank VLBI Survey

    NASA Astrophysics Data System (ADS)

    Taylor, G. B.; Readhead, A. C. S.; Vermeulen, R. C.; Pearson, T. J.; Cohen, M. H.; Henstock, D. R.; Wilkinson, P. N.; Browne, I. W. A.; Patnaik, A.

    1993-05-01

    We present preliminary results from the second Caltech-Jodrell Bank VLBI survey (CJ2). This is a Mark 2 snapshot VLBI survey of flat- and peaked-spectrum sources. The CJ2 survey extends the morphological study of the Pearson & Readhead (1988, ApJ, 328, 114 and Pearson et al. 1993, these proceedings -- hereafter PR) and Caltech-Jodrell Bank (Xu et al. 1992, BAAS, 24, 1300 hereafter CJ) surveys to 400 sources. The CJ2 survey has three new cosmological goals: 1) to populate the proper motion--redshift diagram for superluminal sources; 2) to populate the size--redshift diagram for compact sources (both diagrams can be used to estimate the deceleration parameter, q_0); and 3) to search for small-separation gravitationally-lensed systems and hence to look directly for mass concentrations in the unexplored range of 10(6) - 10(9) \\solmass. We expect this survey, like the previous large VLBI surveys, will reveal 5-10% of the sources to be interesting, unusual objects worth further study. The CJ2 sample is drawn from the Patnaik et al. (1992, MNRAS, 254, 655) list of ~ 900 compact flat-spectrum sources north of delta = 35° with 6 cm flux densities greater than 200 mJy. We have selected the strongest 200 of these sources subject to the further criteria that they are out of the galactic plane (|b| > 10°), flat-spectrum (alpha flatter than -0.5), and have not been previously observed in the PR or CJ surveys. So far 76 sources have been successfully imaged at 6 cm with ~ 1 mas resolution and a typical dynamic range of 500:1. The vast majority (63/76) of these sources have core-jet morphologies and are therefore well suited for the cosmological tests described above. Roughly 12% (9/76) are candidate compact symmetric (CS) sources. This group of sources is not well understood and is of considerable current interest (Readhead et al. 1993, these proceedings).

  3. 22 GHz VLBI Survey: Status Report and Preliminary Results

    NASA Technical Reports Server (NTRS)

    Moellenbrock, G.; Fujisawa, K.; Preston, R.; Gurvits, L.; Dewey, R.; Hirabayashi, H.; Inoue, M.; Jauncey, D.; Migenes, V.; Roberts, D.; Schilizzi, R.; Tingay, S.; Zensus, A.

    1994-01-01

    A ground-based VLBI survey to measure the visibilities and correlated flux densities in continuum at 22 GHz of more than 140 extragalactic radio sources has been conducted with baselines up to approximately 11 000 km. The project has been designed to help in preparation of target lists for VSOP and Radioastron Space VLBI missions as well as providing observational data for statistical study of structural properties at 22 GHz on sub-milliarcsecond scales for this large sample of extragalactic sources.

  4. Physical Education in Schools: Preliminary Findings of a Worldwide Survey. Part II.

    ERIC Educational Resources Information Center

    Hardman, Ken; Marshall, J. Joe

    2000-01-01

    This second in a two-part article summarizes the preliminary findings of a worldwide survey on physical education in schools. This part focuses on: resources (i.e., finances, facilities and equipment, and qualified teaching personnel); issues and trends in physical education; concluding comments; and selected references covering both parts of the…

  5. 18 CFR 367.1830 - Account 183, Preliminary survey and investigation charges.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Account 183, Preliminary survey and investigation charges. 367.1830 Section 367.1830 Conservation of Power and Water... abandoned, the charge must be made to account 426.5, Other deductions (§ 367.4265), or to the...

  6. 18 CFR 367.1830 - Account 183, Preliminary survey and investigation charges.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Account 183, Preliminary survey and investigation charges. 367.1830 Section 367.1830 Conservation of Power and Water... abandoned, the charge must be made to account 426.5, Other deductions (§ 367.4265), or to the...

  7. 18 CFR 367.1830 - Account 183, Preliminary survey and investigation charges.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Account 183, Preliminary survey and investigation charges. 367.1830 Section 367.1830 Conservation of Power and Water... abandoned, the charge must be made to account 426.5, Other deductions (§ 367.4265), or to the...

  8. 18 CFR 367.1830 - Account 183, Preliminary survey and investigation charges.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Account 183, Preliminary survey and investigation charges. 367.1830 Section 367.1830 Conservation of Power and Water... abandoned, the charge must be made to account 426.5, Other deductions (§ 367.4265), or to the...

  9. 18 CFR 367.1830 - Account 183, Preliminary survey and investigation charges.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Account 183, Preliminary survey and investigation charges. 367.1830 Section 367.1830 Conservation of Power and Water... abandoned, the charge must be made to account 426.5, Other deductions (§ 367.4265), or to the...

  10. A Survey of Special Health Care Procedures Required by Students in Iowa Schools. A Preliminary Report.

    ERIC Educational Resources Information Center

    Nelson, Richard P.; And Others

    This preliminary report summarizes a statewide (Iowa) survey which assessed the extent of the use of special care procedures in the public schools. Respondents included 873 schools including the 17 special schools which serve children with multiple disabilities. Reporting schools identified 460 students with requirements for special care…

  11. Environmental Scanning: Preliminary Findings of a Survey of CEO Information Seeking Behaviour in Two Canadian Industries.

    ERIC Educational Resources Information Center

    Auster, Ethel; Choo, Chun Wei

    1992-01-01

    Reports the preliminary results of a survey of the environmental scanning behavior of 207 chief executive officers (CEOs) in the Canadian publishing and telecommunications industries. Topics addressed include information sources, perceived source accessibility, perceived source quality, and frequency of source use. (16 references) (LRW)

  12. Environmental Survey preliminary report, National Institute for Petroleum and Energy Research, Bartlesville, Oklahoma

    SciTech Connect

    Not Available

    1989-01-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the US Department of Energy's (DOE) National Institute for Petroleum and Energy Research (NIPER), conducted February 29 through March 4, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Team members are being provided by private contractors. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with NIPER. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at NIPER and interviews with site personnel. 35 refs., 8 figs., 15 tabs.

  13. Environmental Survey preliminary report, Naval Petroleum Reserves in California (NPRC), Tupman, California

    SciTech Connect

    Not Available

    1989-02-01

    This report presents the preliminary environmental findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Naval Petroleum Reserves 1 (NPR-1) and 2 (NPR-2) in California (NPRC), conducted May 9--20, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with NPRC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involved the review of existing site environmental data, observations of the operations carried on at NPRC, and interviews with site personnel. 120 refs., 28 figs., 40 tabs.

  14. Preliminary results of a radio echo sounding survey of the Recovery Glacier, Antarctica

    NASA Astrophysics Data System (ADS)

    Humbert, Angelika; Kleiner, Thomas; Steinhage, Daniel

    2014-05-01

    The Recovery Glacier is draining about 8% of the East Antarctic ice sheet and feeds into the Filchner Ice Shelf. This ice shelf might be subjected in future to increasing basal melting (Hellmer et al., 2012) forcing potentially grounding line retreat. Compared to other areas in Antarctica this glacier is been surveyed very sparse and hence does not allow modeling studies yet. As many large and small subglacial lakes are present underneath this ice stream at different locations along the flow, the question of the influence of the lakes on ice stream genesis and ice stream dynamics arose. For investigating this influence by observation and subsequent modelling, an airborne campaign of the Alfred Wegener Institute was carried out in January 2014, covering the Recovery Ice Stream and two smaller glaciers merging with it, the Ramp Glacier and the Blackwall Glacier. The radar system uses a carrier frequency of 150MHz and a 600ns pulse. The survey includes several flights along flow lines in order to assess the basal roughness of the ice stream. Here we present the first preliminary data analysis.

  15. A preliminary survey of the epidemiology of bluetongue in Kenya

    PubMed Central

    Walker, A. R.; Davies, F. G.

    1971-01-01

    A survey of the species composition and distribution of the Culicoides midge populations at a range of sites where bluetongue is enzootic isolated a group of dominant species: C. cornutus, C. grahamii, C. magnus, C. milnei, C. pallidipennis and C. 23. † Monthly light-trap sampling of Culicoides showed that the population densities of the dominant species greatly increased after the rain seasons and that these species concentrated around flocks of sheep and cattle. The larval habitats of C. cornutus and C. pallidipennis were found associated with stock pens. Precipitin tests on blood-fed Culicoides showed that most of the dominant species regularly feed on sheep and cattle. Bluetongue virus was isolated from C. milnei, C. pallidipennis and C. 23. Serological surveys of wild and domestic bovids from the enzootic area showed a high proportion with antibody to bluetongue virus. The colonization of C. cornutus, a potential vector, is described briefly. A causal relationship between peak rainfall in April—May, peak numbers of Culicoides in May—June and peak bluetongue incidence in June—July is postulated. The vector status of the above species and C. austeni was evaluated. PMID:4337112

  16. Environmental Survey preliminary report, Strategic Petroleum Reserve, Texas and Louisiana Gulf Coast

    SciTech Connect

    Not Available

    1989-01-01

    This report presents the preliminary environmental findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Strategic Petroleum Reserve (SPR), located in Louisiana and Texas, and conducted in two segments from November 30 through December 11, 1987, and February 1 through 10, 1988. The Survey is being conducted by a multidisciplinary team of environmental specialists led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with SPR. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involved the review of existing site environmental data, observations of the operations carried on at SPR, and interviews with site personnel. The Survey team has developed a Sampling and Analysis Plan to assist in further assessing specific environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by Idaho National Engineering Laboratory. When completed, the results will be incorporated into the SPR Survey findings for inclusion into the Environmental Survey Summary Report. The Summary Report will reflect the final determinations of the SPR Survey and the other DOE site-specific Surveys. 200 refs., 50 figs., 30 tabs.

  17. Preliminary basic performance analysis of the Cedar multiprocessor memory system

    NASA Technical Reports Server (NTRS)

    Gallivan, K.; Jalby, W.; Turner, S.; Veidenbaum, A.; Wijshoff, H.

    1991-01-01

    Some preliminary basic results on the performance of the Cedar multiprocessor memory system are presented. Empirical results are presented and used to calibrate a memory system simulator which is then used to discuss the scalability of the system.

  18. Preliminary design activities for solar heating and cooling systems

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Information on the development of solar heating and cooling systems is presented. The major emphasis is placed on program organization, system size definition, site identification, system approaches, heat pump and equipment design, collector procurement, and other preliminary design activities.

  19. Preliminary flight prototype potable water bactericide system

    NASA Technical Reports Server (NTRS)

    Jasionowski, W. J.; Allen, E. T.

    1973-01-01

    The development, design, and testing of a preliminary flight prototype potable water bactericide system are described. The system is an assembly of upgraded canisters composed of: (1) A biological filter; (2) an activated charcoal and ion exchange resin canister; (3) a silver chloride canister, (4) a deionizer, (5) a silver bromide canister with a partial bypass, and (6) mock-up instrumentation and circuitry. The system exhibited bactericidal activity against 10 to the 9th power Pseudomonas aeruginosa and/or Type IIIa, and reduced Bacillus subtilis by up to 5 orders of magnitude in 24 hours at ambient temperatures with a 1 ppm silver ion dose. Four efficacy tests were performed with a AgBr canister dosing anticipated fuel cell water. Tests show that a 0.05 ppm silver ion dose was bactericidal against 3 plus or minus 1 x 10 to the 9th power (5 plus or minus 1 x 10,000/ml Pseudomonas aeruginosa and/or Type IIIa in 15 minutes or less.

  20. Preliminary images from an adaptive imaging system.

    PubMed

    Griffiths, J A; Metaxas, M G; Pani, S; Schulerud, H; Esbrand, C; Royle, G J; Price, B; Rokvic, T; Longo, R; Asimidis, A; Bletsas, E; Cavouras, D; Fant, A; Gasiorek, P; Georgiou, H; Hall, G; Jones, J; Leaver, J; Li, G; Machin, D; Manthos, N; Matheson, J; Noy, M; Ostby, J M; Psomadellis, F; van der Stelt, P F; Theodoridis, S; Triantis, F; Turchetta, R; Venanzi, C; Speller, R D

    2008-06-01

    I-ImaS (Intelligent Imaging Sensors) is a European project aiming to produce real-time adaptive X-ray imaging systems using Monolithic Active Pixel Sensors (MAPS) to create images with maximum diagnostic information within given dose constraints. Initial systems concentrate on mammography and cephalography. In our system, the exposure in each image region is optimised and the beam intensity is a function of tissue thickness and attenuation, and also of local physical and statistical parameters in the image. Using a linear array of detectors, the system will perform on-line analysis of the image during the scan, followed by optimisation of the X-ray intensity to obtain the maximum diagnostic information from the region of interest while minimising exposure of diagnostically less important regions. This paper presents preliminary images obtained with a small area CMOS detector developed for this application. Wedge systems were used to modulate the beam intensity during breast and dental imaging using suitable X-ray spectra. The sensitive imaging area of the sensor is 512 x 32 pixels 32 x 32 microm(2) in size. The sensors' X-ray sensitivity was increased by coupling to a structured CsI(Tl) scintillator. In order to develop the I-ImaS prototype, the on-line data analysis and data acquisition control are based on custom-developed electronics using multiple FPGAs. Images of both breast tissues and jaw samples were acquired and different exposure optimisation algorithms applied. Results are very promising since the average dose has been reduced to around 60% of the dose delivered by conventional imaging systems without decrease in the visibility of details. PMID:18291697

  1. THE BRIGHTEST OF REIONIZING GALAXIES SURVEY: DESIGN AND PRELIMINARY RESULTS

    SciTech Connect

    Trenti, M.; Bradley, L. D.; Stiavelli, M.; MacKenty, J. W.; Oesch, P.; Carollo, C. M.; Treu, T.; Bouwens, R. J.; Illingworth, G. D.; Shull, J. M.

    2011-02-01

    We present the first results on the search for very bright (M{sub AB} {approx} -21) galaxies at redshift z {approx} 8 from the Brightest of Reionizing Galaxies (BoRG) survey. BoRG is a Hubble Space Telescope Wide Field Camera 3 (WFC3) pure-parallel survey that is obtaining images on random lines of sight at high Galactic latitudes in four filters (F606W, F098M, F125W, and F160W), with integration times optimized to identify galaxies at z {approx}> 7.5 as F098M dropouts. We discuss here results from a search area of approximately 130 arcmin{sup 2} over 23 BoRG fields, complemented by six other pure-parallel WFC3 fields with similar filters. This new search area is more than two times wider than previous WFC3 observations at z {approx} 8. We identify four F098M-dropout candidates with high statistical confidence (detected at greater than 8{sigma} confidence in F125W). These sources are among the brightest candidates currently known at z {approx} 8 and approximately 10 times brighter than the z = 8.56 galaxy UDFy-38135539. They thus represent ideal targets for spectroscopic follow-up observations and could potentially lead to a redshift record, as our color selection includes objects up to z {approx} 9. However, the expected contamination rate of our sample is about 30% higher than typical searches for dropout galaxies in legacy fields, such as the GOODS and HUDF, where deeper data and additional optical filters are available to reject contaminants.

  2. The Gaia spectrophotometric standard stars survey - I. Preliminary results

    NASA Astrophysics Data System (ADS)

    Pancino, E.; Altavilla, G.; Marinoni, S.; Cocozza, G.; Carrasco, J. M.; Bellazzini, M.; Bragaglia, A.; Federici, L.; Rossetti, E.; Cacciari, C.; Balaguer Núñez, L.; Castro, A.; Figueras, F.; Fusi Pecci, F.; Galleti, S.; Gebran, M.; Jordi, C.; Lardo, C.; Masana, E.; Monguió, M.; Montegriffo, P.; Ragaini, S.; Schuster, W.; Trager, S.; Vilardell, F.; Voss, H.

    2012-11-01

    We describe two ground-based observing campaigns aimed at building a grid of approximately 200 spectrophotometric standard stars (SPSS), with an internal ≃1 per cent precision and tied to Vega within ≃3 per cent, for the absolute flux calibration of data gathered by Gaia, the European Space Agency (ESA) astrometric mission. The criteria for the selection and a list of candidates are presented, together with a description of the survey strategy and the adopted data analysis methods. We also discuss a short list of notable rejected SPSS candidates and difficult cases, based on identification problems, literature discordant data, visual companions and variability. In fact, all candidates are also monitored for constancy (within ±5 mmag, approximately). In particular, we report on a CALSPEC standard, 1740346, that we found to be a δ Scuti variable during our short-term monitoring (1-2 h) campaign. Based on data obtained within the Gaia Data Processing and Analysis Consortium (DPAC) - and coordinated by the Ground-based Observations for Gaia (GBOG) working group - at various telescopes; see acknowledgments.

  3. Wellbore inertial directional surveying system

    DOEpatents

    Andreas, R.D.; Heck, G.M.; Kohler, S.M.; Watts, A.C.

    1982-09-08

    A wellbore inertial directional surveying system for providing a complete directional survey of an oil or gas well borehole to determine the displacement in all three directions of the borehole path relative to the well head at the surface. The information generated by the present invention is especially useful when numerous wells are drilled to different geographical targets from a single offshore platform. Accurate knowledge of the path of the borehole allows proper well spacing and provides assurance that target formations are reached. The tool is lowered down into a borehole on an electrical cable. A computer positioned on the surface communicates with the tool via the cable. The tool contains a sensor block which is supported on a single gimbal, the rotation axis of which is aligned with the cylinder axis of the tool and, correspondingly, the borehole. The gyroscope measurement of the sensor block rotation is used in a null-seeking servo loop which essentially prevents rotation of the sensor block about the gimbal axis. Angular rates of the sensor block about axes which are perpendicular to te gimbal axis are measured by gyroscopes in a manner similar to a strapped-down arrangement. Three accelerometers provide acceleration information as the tool is lowered within the borehole. The uphole computer derives position information based upon acceleration information and angular rate information. Kalman estimation techniques are used to compensate for system errors. 25 figures.

  4. Wellbore inertial directional surveying system

    DOEpatents

    Andreas, Ronald D.; Heck, G. Michael; Kohler, Stewart M.; Watts, Alfred C.

    1991-01-01

    A wellbore inertial directional surveying system for providing a complete directional survey of an oil or gas well borehole to determine the displacement in all three directions of the borehole path relative to the well head at the surface. The information generated by the present invention is especially useful when numerous wells are drilled to different geographical targets from a single off-shore platform. Accurate knowledge of the path of the borehole allows proper well spacing and provides assurance that target formations are reached. The tool is lowered down into a borehole on the electrical cable. A computer positioned on the surface communicates with the tool via the cable. The tool contains a sensor block which is supported on a single gimbal, the rotation axis of which is aligned with the cylinder axis of the tool and, correspondingly, the borehole. The gyroscope measurement of the sensor block rotation is used in a null-seeking servo loop which essentially prevents rotation of the sensor block aboutthe gimbal axis. Angular rates of the sensor block about axes which are perpendicular to the gimbal axis are measured by gyroscopes in a manner similar to a strapped-down arrangement. Three accelerometers provide acceleration information as the tool is lowered within the borehole. The uphole computer derives position information based upon acceleration information and anular rate information. Kalman estimation techniques are used to compensate for system errors.

  5. Wellbore inertial directional surveying system

    SciTech Connect

    Andreas, R.D.; Heck, G.M.; Kohler, S.M.; Watts, A.C.

    1991-01-29

    This patent describes a wellbore inertial directional surveying system for providing a complete directional survey of an oil or gas well borehole to determine the displacement in all three directions of the borehole path relative to the well head at the surface. The information generated by the present invention is especially useful when numerous wells are drilled to different geographical targets from a single off-shore platform. Accurate knowledge of the path of the borehole allows proper well spacing and provides assurance that target formations are reached. The tool is lowered down into a borehole on the electrical cable. A computer positioned on the surface communicates with the tool via the cable. The tool contains a sensor block which is supported on a single gimbal, the rotation axis of which is aligned with the cylinder axis of the tool and, correspondingly, the borehole. The gyroscope measurement of the sensor block rotation is used in a null-seeking servo loop which essentially prevents rotation of the sensor block about the gimbal axis. Angular rates of the sensor block about axes which are perpendicular to the gimbal axis are measured by gyroscopes in a manner similar to a strapped-down arrangement. Three accelerometers provide acceleration information as the tool is lowered within the borehole. The uphole computer derives position information based upon acceleration information and annular rate information. Kalman estimation techniques are used to compensate for system errors.

  6. Preliminary survey of separations technology applicable to the pretreatment of Hanford tank waste (1992--1993)

    SciTech Connect

    Lawrence, W.E.; Kurath, D.E.

    1994-04-01

    The US Department of Energy has established the Tank Waste Remediation System (TWRS) to manage and dispose of radioactive wastes stored at the Hanford Site. Within this program are evaluations of pretreatment system alternatives through literature reviews. The information in this report was collected as part of this project at Pacific Northwest Laboratory. A preliminary survey of literature on separations recently entered into the Hanford electronic databases (1992--1993) that have the potential for pretreatment of Hanford tank waste was conducted. Separation processes that can assist in the removal of actinides (uranium, plutonium, americium), lanthanides, barium, {sup 137}Cs, {sup 90}Sr,{sup 129 }I, {sup 63}Ni, and {sup 99}Tc were evaluated. Separation processes of interest were identified through literature searches, journal reviews, and participation in separation technology conferences. This report contains brief descriptions of the potential separation processes, the extent and/or selectivity of the separation, the experimental conditions, and observations. Information was collected on both national and international separation studies to provide a global perspective on recent research efforts.

  7. Environmental Survey preliminary report, Laboratory for Energy-Related Health Research, Davis, California

    SciTech Connect

    Not Available

    1988-03-01

    This report presents the preliminary findings from the first phase of the Survey of the United States Department of Energy (DOE) Laboratory for Energy-Related Health Research (LEHR) at the University of California, Davis (UC Davis), conducted November 16 through 20, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the LEHR. The Survey covers all environmental media and all areas of environmental regulation, and is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations at the LEHR and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the LEHR at UC Davis. The Interim Report will reflect the final determinations of the LEHR Survey. 75 refs., 26 figs., 23 tabs.

  8. Environmental Survey preliminary report, Los Alamos National Laboratory, Los Alamos, New Mexico

    SciTech Connect

    Not Available

    1988-01-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Los Alamos National Laboratory (LANL), conducted March 29, 1987 through April 17, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the LANL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the LANL, and interviews with site personnel. The Survey team developed Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by the Idaho National Engineering Laboratory. When completed, the results will be incorporated into the LANL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey for the LANL. 65 refs., 68 figs., 73 tabs.

  9. Environmental Survey preliminary report, Oak Ridge Gaseous Diffusion Plant, Oak Ridge, Tennessee

    SciTech Connect

    Not Available

    1989-02-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy's (DOE) Oak Ridge Gaseous Diffusion Plant (ORGDP) conducted March 14 through 25, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental risk associated with ORGDP. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at ORGDP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during is on-site activities. The Sampling and Analysis Plan will be executed by Idaho National Engineering Laboratory (INEL). When completed, the results will be incorporated into the ORGDP Survey findings for in inclusion into the Environmental Survey Summary Report. 120 refs., 41 figs., 74 tabs.

  10. Environmental Survey preliminary report, Princeton Plasma Physics Laboratory, Princeton, New Jersey

    SciTech Connect

    Not Available

    1989-05-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Princeton Plasma Physics Laboratory (PPPL), conducted June 13 through 17, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Team members are being provided by private contractors. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PPPL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PPPL, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain of the environment problems identified during its on-site activities. The S A plan is being developed by the Idaho National Engineering Laboratory. When completed, the S A results will be incorporated into the PPPL Survey findings for inclusion in the Environmental Survey Summary Report. 70 refs., 17 figs., 21 tabs.

  11. Environmental Survey preliminary report, Oak Ridge National Laboratory (X-10), Oak Ridge, Tennessee

    SciTech Connect

    Not Available

    1988-07-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Oak Ridge National Laboratory (ORNL), X-10 site, conducted August 17 through September 4, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with ORNL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at ORNL, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for ORNL. The Interim Report will reflect the final determinations of the ORNL Survey. 120 refs., 68 figs., 71 tabs.

  12. Survey of holographic security systems

    NASA Astrophysics Data System (ADS)

    Kontnik, Lewis T.; Lancaster, Ian M.

    1990-04-01

    The counterfeiting of products and financial instruments is a major problem throughout the world today. The dimensions of the problem are growing, accelerated by the expanding availability of production technologies to sophisticated counterfeiters and the increasing capabilities of these technologies. Various optical techniques, including holography, are beingused in efforts to mark authentic products and to distinguish them from copies. Industry is recognizing that the effectiveness of these techniques depends on such factors as the economics of the counterfeiting process and the distribution channels for the products involved, in addition to the performance of the particular optical security technologies used. This paper surveys the nature of the growing counterfeit market place and reviews the utility of holographic optical security systems. In particular, we review the use of holograms on credit cards and other products; and outline certain steps the holography industry should take to promote these application.

  13. Preliminary Survey of Icing Conditions Measured During Routine Transcontinental Airline Operation

    NASA Technical Reports Server (NTRS)

    Perkins, Porter J.

    1952-01-01

    Icing data collected on routine operations by four DC-4-type aircraft equipped with NACA pressure-type icing-rate meters are presented as preliminary information obtained from a statistical icing data program sponsored by the NACA with the cooperation of many airline companies and the United States Air Force. The program is continuing on a much greater scale to provide large quantities of data from many air routes in the United States and overseas. Areas not covered by established air routes are also being included in the survey. The four aircraft which collected the data presented in this report were operated by United Air Lines over a transcontinental route from January through May, 1951. An analysis of the pressure-type icing-rate meter was satisfactory for collecting statistical data during routine operations. Data obtained on routine flight icing encounters from.these four instrumented aircraft, although insufficient for a conclusive statistical analysis, provide a greater quantity and considerably more realistic information than that obtained from random research flights. A summary of statistical data will be published when the information obtained daring the 1951-52 icing season and that to be obtained during the 1952-53 season can be analyzed and assembled. The 1951-52 data already analyzed indicate that the quantity, quality, and range of icing information being provided by this expanded program should afford a sound basis for ice-protection-system design by defining the important meteorological parameters of the icing cloud.

  14. Preliminary design package for prototype solar heating system

    NASA Technical Reports Server (NTRS)

    1978-01-01

    A summary is given of the preliminary analysis and design activity on solar heating systems. The analysis was made without site specific data other than weather; therefore, the results indicate performance expected under these special conditions. Major items include system candidates, design approaches, trade studies and other special data required to evaluate the preliminary analysis and design. The program calls for the development and delivery of eight prototype solar heating and cooling systems for installation and operational test.

  15. INDUSTRIAL WASTEWATER RECIRCULATION SYSTEM: PRELIMINARY ENGINEERING

    EPA Science Inventory

    The report details the preliminary engineering work done at Owens-Corning's (O-C's) Anderson, South Carolina, fibrous glass plant. The purpose of the work was to test, on a pilot plant scale, various technologies to be used to clean up industrial wastewater for a closed-loop syst...

  16. Intelligent redundant actuation system requirements and preliminary system design

    NASA Technical Reports Server (NTRS)

    Defeo, P.; Geiger, L. J.; Harris, J.

    1985-01-01

    Several redundant actuation system configurations were designed and demonstrated to satisfy the stringent operational requirements of advanced flight control systems. However, this has been accomplished largely through brute force hardware redundancy, resulting in significantly increased computational requirements on the flight control computers which perform the failure analysis and reconfiguration management. Modern technology now provides powerful, low-cost microprocessors which are effective in performing failure isolation and configuration management at the local actuator level. One such concept, called an Intelligent Redundant Actuation System (IRAS), significantly reduces the flight control computer requirements and performs the local tasks more comprehensively than previously feasible. The requirements and preliminary design of an experimental laboratory system capable of demonstrating the concept and sufficiently flexible to explore a variety of configurations are discussed.

  17. Preliminary design package for prototype solar heating system

    NASA Technical Reports Server (NTRS)

    1976-01-01

    A preliminary design review on the development of a prototype solar heating system for single family dwellings is presented. The collector, storage, transport, control, and site data acquisition subsystems are described.

  18. Space telescope observatory management system preliminary test and verification plan

    NASA Technical Reports Server (NTRS)

    Fritz, J. S.; Kaldenbach, C. F.; Williams, W. B.

    1982-01-01

    The preliminary plan for the Space Telescope Observatory Management System Test and Verification (TAV) is provided. Methodology, test scenarios, test plans and procedure formats, schedules, and the TAV organization are included. Supporting information is provided.

  19. A preliminary survey of the National Wetlands Inventory as mapped for the Idaho National Engineering Laboratory

    SciTech Connect

    Hampton, N.L.; Rope, R.C.; Glennon, J.M.; Moor, K.S.

    1995-02-01

    Approximately 135 areas within the boundaries of the Idaho National Engineering Laboratory (INEL) have been mapped as wetland habitat as part of the United States Fish and Wildlife Service (FWS) National Wetlands Inventory (NWI). A preliminary survey of these wetlands was conducted to examine their general characteristics and status, to provide an estimation of relative ecological importance, to identify additional information needed to complete ecological characterization of important INEL wetlands, and to identify high priority wetland areas on the INEL. The purpose of the survey was to provide information to support the preparation of the Environmental Restoration and Waste Management (ER&WM) Environmental Impact Statement (EIS). Information characterizing general vegetation, hydrology, wildlife use, and archaeology was collected at 105 sample sites on the INEL. Sites representing NWI palustrine, lacustrine, and riverine wetlands (including manmade), and areas unmapped or unclassified by the NWI were included in the sample. The field information was used to develop a preliminary ranking of relative ecological importance for each wetland visited during this survey. Survey limitations are identified.

  20. National health financing policy in Eritrea: a survey of preliminary considerations

    PubMed Central

    2012-01-01

    Background The 58th World Health Assembly and 56th WHO Regional Committee for Africa adopted resolutions urging Member States to ensure that health financing systems included a method for prepayment to foster financial risk sharing among the population and avoid catastrophic health-care expenditure. The Regional Committee asked countries to strengthen or develop comprehensive health financing policies. This paper presents the findings of a survey conducted among senior staff of selected Eritrean ministries and agencies to elicit views on some of the elements likely to be part of a national health financing policy. Methods This is a descriptive study. A questionnaire was prepared and sent to 19 senior staff (Directors) in the Ministry of Health, Labour Department, Civil Service Administration, Eritrean Confederation of Workers, National Insurance Corporation of Eritrea and Ministry of Local Government. The respondents were selected by the Ministry of Health as key informants. Results The key findings were as follows: the response rate was 84.2% (16/19); 37.5% (6/16) and 18.8% said that the vision of Eritrean National Health Financing Policy (NHFP) should include the phrases ‘equitable and accessible quality health services’ and ‘improve efficiency or reduce waste’ respectively; over 68% indicated that NHFP should include securing adequate funding, ensuring efficiency, ensuring equitable financial access, protection from financial catastrophe, and ensuring provider payment mechanisms create positive incentives to service providers; over 80% mentioned community participation, efficiency, transparency, country ownership, equity in access, and evidence-based decision making as core values of NHFP; over 62.5% confirmed that NHFP components should consist of stewardship (oversight), revenue collection, revenue pooling and risk management, resource allocation and purchasing of health services, health economics research, and development of human resources for health

  1. Small scale hydroelectric power potential in Nevada: a preliminary reconnaissance survey

    SciTech Connect

    Cochran, G.F.; Fordham, J.W.; Richard, K.; Loux, R.

    1981-04-01

    This preliminary reconnaissance survey is intended to: develop a first estimate as to the potential number, location and characteristics of small-scale (50 kW to 15 MW) hydroelectric sites in Nevada; provide a compilation of various Federal and state laws and regulations, including tax and financing regulations, that affect small-scale hydroelectric development and provide information on sources of small-scale hydroelectric generation hardware and consultants/ contractors who do small scale hydroelectric work. The entire survey has been conducted in the office working with various available data bases. The site survey and site evaluation methods used are described, and data are tabulated on the flow, power potential, predicted capital expenditures required, etc. for 61 potential sites with measured flows and for 77 sites with derived flows. A map showing potential site locations is included. (LCL)

  2. Preliminary design package for solar heating and hot water system

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The preliminary design review on the development of two prototype solar heating and hot water systems is presented. The information contained in this report includes system certification, system functional description, system configuration, system specification, system performance and other documents pertaining to the progress and the design of the system. This system, which is intended for use in the normal single-family residence, consists of the following subsystems: collector, storage, control, transport, and Government-furnished Site Data Acquisition.

  3. Comparison-Bot: an Automated Preliminary-Final Report Comparison System.

    PubMed

    Kalaria, Amit D; Filice, Ross W

    2016-06-01

    Regular comparison of preliminary to final reports is a critical part of radiology resident and fellow education as prior research has documented substantial preliminary to final discrepancies. Unfortunately, there are many barriers to this comparison: high study volume; overnight rotations without an attending; the ability to finalize reports remotely; the subtle nature of many changes; and lack of easy access to the preliminary report after finalization. We developed a system that automatically compiles and emails a weekly summary of report differences for all residents and fellows. Trainees can also create a custom report using a date range of their choice and can view this data on a resident dashboard. Differences between preliminary and final reports are clearly highlighted with links to the associated study in Picture Archiving and Communication Systems (PACS) for efficient review and learning. Reports with more changes, particularly changes made in the impression, are highlighted to focus attention on those exams with substantive edits. Our system provides an easy way for trainees to review changes to preliminary reports with immediate access to the associated images, thereby improving their educational experience. Departmental surveys showed that our report difference summary is easy to understand and improves the educational experience of our trainees. Additionally, interesting descriptive statistics help us understand how reports are changed by trainee level, by attending, and by exam type. Finally, this system can be easily ported to other departments who have access to their Health Level 7 (HL7) data. PMID:26537931

  4. Energy Efficient Engine: Control system preliminary definition report

    NASA Technical Reports Server (NTRS)

    Howe, David C.

    1986-01-01

    The object of the Control Preliminary Definition Program was to define a preliminary control system concept as a part of the Energy Efficient Engine program. The program was limited to a conceptual definition of a full authority digital electronic control system. System requirements were determined and a control system was conceptually defined to these requirements. Areas requiring technological development were identified and a plan was established for implementing the identified technological features, including a control technology demonstration. A significant element of this program was a study of the potential benefits of closed-loop active clearance control, along with laboratory tests of candidate clearance sensor elements for a closed loop system.

  5. Preliminary design package for solar heating and hot water system

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Two prototype solar heating and hot water systems for use in single-family dwellings or commercial buildings were designed. Subsystems included are: collector, storage, transport, hot water, auxiliary energy, and government-furnished site data acquisition. The systems are designed for Yosemite, California, and Pueblo, Colorado. The necessary information to evaluate the preliminary design for these solar heating and hot water systems is presented. Included are a proposed instrumentation plan, a training program, hazard analysis, preliminary design drawings, and other information about the design of the system.

  6. Preliminary design package for solar heating and hot water system

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The preliminary design review on the development of a multi-family solar heating and domestic hot water prototype system is presented. The report contains the necessary information to evaluate the system. The system consists of the following subsystems: collector, storage, transport, control and Government-furnished site data acquisition.

  7. Preliminary characterization of abandoned septic tank systems. Volume 1

    SciTech Connect

    1995-12-01

    This report documents the activities and findings of the Phase I Preliminary Characterization of Abandoned Septic Tank Systems. The purpose of the preliminary characterization activity was to investigate the Tiger Team abandoned septic systems (tanks and associated leachfields) for the purpose of identifying waste streams for closure at a later date. The work performed was not to fully characterize or remediate the sites. The abandoned systems potentially received wastes or effluent from buildings which could have discharged non-domestic, petroleum hydrocarbons, hazardous, radioactive and/or mixed wastes. A total of 20 sites were investigated for the preliminary characterization of identified abandoned septic systems. Of the 20 sites, 19 were located and characterized through samples collected from each tank(s) and, where applicable, associated leachfields. The abandoned septic tank systems are located in Areas 5, 12, 15, 25, and 26 on the Nevada Test Site.

  8. Balkan (endemic) nephropathy and foodborn ochratoxin A: preliminary results of a survey of foodstuffs.

    PubMed

    Krogh, P; Hald, B; Plestina, R; Ceović, S

    1977-06-01

    Ochratoxin A is a nephrotoxic fungal metabolite (mycotoxin) occurring in foodstuffs. The compound is causally associated with mycotoxic porcine nephropathy, a disease comparable with a human kidney disease, Balkan endemic nephropathy. A preliminary survey of home-produced foodstuffs in areas of Yugoslavia revealed that contamination with ochratoxin A is more frequent in an area where Balkan endemic nephropathy is prevalent (endemic area) than in area where this disease is absent. This indicates higher exposure to foodborn ochratoxin A in the endemic area. Thus further evidence is provided supporting the hypothesis that ochratoxin A is a disease determinant of Balkan endemic nephropathyk0 PMID:888703

  9. Preliminary Hazards Assessment: Iron disulfide purification system

    SciTech Connect

    1991-07-30

    A process for the purification (washing) of iron disulfide (FeS{sub 2}) powder is conducted in the Northeast corner (Area 353) of the main plant building (Building 100). This location is about 130 feet from the fenced boundary of the Partnership School/Child Development Center. In the first steps of the process, raw iron disulfide powder is ground and separated by particle size. The ground and sized powder is then purified in a three-step acid washing process using both hydrochloric acid (HCI) and hydrofluoric (HF) acid. The iron disulfide process is an intermittent batch process conducted four to eight times a year. This study is a Preliminary Hazards Assessment (PHA) to assess the hazards associated with the iron disulfide process. This is a preliminary study and will be used to determine if additional safety analysis is necessary. The scope of the PHA includes assessment of the process steps of grinding, size classification, and purification. The purpose is to identify major hazards and determine if the current and newly added safeguards are adequate for operation. The PHA also lists recommendations for additional safety features that should be added to reduce the risks of operation.

  10. A survey of chemical information systems

    NASA Technical Reports Server (NTRS)

    Dominick, Wayne D. (Editor); Shaikh, Aneesa Bashir

    1985-01-01

    A survey of the features, functions, and characteristics of a fairly wide variety of chemical information storage and retrieval systems currently in operation is given. The types of systems (together with an identification of the specific systems) addressed within this survey are as follows: patents and bibliographies (Derwent's Patent System; IFI Comprehensive Database; PULSAR); pharmacology and toxicology (Chemfile; PAGODE; CBF; HEEDA; NAPRALERT; MAACS); the chemical information system (CAS Chemical Registry System; SANSS; MSSS; CSEARCH; GINA; NMRLIT; CRYST; XTAL; PDSM; CAISF; RTECS Search System; AQUATOX; WDROP; OHMTADS; MLAB; Chemlab); spectra (OCETH; ASTM); crystals (CRYSRC); and physical properties (DETHERM). Summary characteristics and current trends in chemical information systems development are also examined.

  11. Self-reported vicarious trauma in asylum evaluators: a preliminary survey.

    PubMed

    Mishori, Ranit; Mujawar, Imran; Ravi, Nirmal

    2014-12-01

    Hundreds of clinicians in the US conduct asylum evaluations, to document evidence of torture and persecution of people fleeing their home countries. Participating in these encounters puts clinicians at risk for vicarious trauma (VT). Little research addressed VT in physicians. Even less is known about VT among asylum evaluators. A survey was distributed to members of the asylum network of Physicians for Human Rights in Spring 2012. The majority (65%) of survey participants denied having experienced VT. However, being female, being a mental health professional and having performed a greater number of evaluations was associated with a higher likelihood of reporting VT. We present preliminary data about VT in asylum evaluators. Recruiters and trainers should make every effort to address the issue and educate their volunteers about means of identifying and managing symptoms. Formal and informal support services and resources should be developed and shared with volunteers. PMID:24306284

  12. Preliminary Thoughts on Netted Cable Communication Systems.

    ERIC Educational Resources Information Center

    Eldridge, Frank; Mason, William

    There are five categories of cable communication systems: Conventional Community Antenna Television (CATV), Pay-TV, Subscriber Response Systems, Electronic Information Handling Systems, and Two-Way Audio/Visual Systems. CATV and Pay-TV systems are designed for the one-way transmission of programs, the former providing for better quality…

  13. Preliminary design study of astronomical detector cooling system

    NASA Technical Reports Server (NTRS)

    Norman, R. H.

    1976-01-01

    The preliminary design of an astronomical detector cooling system for possible use in the NASA C-141 Airborne Infrared Observatory is presented. The system consists of the following elements: supercritical helium tank, Joule-Thomson supply gas conditioner, Joule-Thomson expander (JTX), optical cavity dewar, optical cavity temperature controller, adjustable J-T discharge gas pressure controller, and vacuum pump.

  14. Survey on large scale system control methods

    NASA Technical Reports Server (NTRS)

    Mercadal, Mathieu

    1987-01-01

    The problem inherent to large scale systems such as power network, communication network and economic or ecological systems were studied. The increase in size and flexibility of future spacecraft has put those dynamical systems into the category of large scale systems, and tools specific to the class of large systems are being sought to design control systems that can guarantee more stability and better performance. Among several survey papers, reference was found to a thorough investigation on decentralized control methods. Especially helpful was the classification made of the different existing approaches to deal with large scale systems. A very similar classification is used, even though the papers surveyed are somehow different from the ones reviewed in other papers. Special attention is brought to the applicability of the existing methods to controlling large mechanical systems like large space structures. Some recent developments are added to this survey.

  15. Preliminary design report for the prototypical fuel rod consolidation system

    SciTech Connect

    Rosa, J.M.

    1986-12-03

    This report documents NUTECH's preliminary design of a dry, spent fuel rod consolidation system. This preliminary design is the result of Phase I of a planned four phase project. The present report on this project provides a considerable amount of detail for a preliminary design effort. The design and all of its details are described in this Preliminary Design Report (PDR). The NUTECH dry rod consolidation system described herein is remotely operated. It provides for automatic operation, but with operator hold points between key steps in the process. The operator has the ability to switch to a manual operation mode at any point in the process. The system is directed by the operator using an executive computer which controls and coordinates the operation of the in-cell equipment. The operator monitors the process using an in-cell closed circuit television (CCTV) system with audio output and equipment status displays on the computer monitor. The in-cell mechanical equipment consists of the following: (1) two overhead cranes with manipulators; (2) a multi-degree of freedom fuel handling table and its clamping equipment; (3) a fuel assembly end fitting removal station and its tools; (4) a consolidator (which pulls rods, assembles the consolidated bundle and loads the canister); (5) a canister end cap welder and weld inspection system; (6) decontamination systems; and (7) the CCTV and microphone systems.

  16. Survey of Electronic Safety Systems in Accelerator Applications

    NASA Astrophysics Data System (ADS)

    Mahoney, K.

    1997-05-01

    This paper presents the preliminary results and analysis of a comprehensive survey of the implementation of accelerator safety interlock systems at over 20 international labs. At the present time there is not a self consistent means to evaluate both the experience and level of protection provided by electronic safety interlock systems. This research is intended to analyze the strengths and weaknesses of several different types of interlock system implementation methodologies. Research, medical, and industrial accelerators are compared. The CEBAF accelerator at Thomas Jefferson National Accelerator Facility (Jefferson Lab) was one of the first large particle accelerators to implement a safety interlock system using programmable logic controllers. Since that time all of the major new U.S. accelerator construction projects plan to use some form of programmable electronics as part of a safety interlock system in some capacity. To the author's knowledge such a compilation has not been presented before.

  17. Preliminary design package for prototype solar heating and cooling systems

    NASA Technical Reports Server (NTRS)

    1978-01-01

    A summary is given of the preliminary analysis and design activity on solar heating and cooling systems. The analysis was made without site specific data other than weather; therefore, the results indicate performance expected under these special conditions. Major items include a market analysis, design approaches, trade studies and other special data required to evaluate the preliminary analysis and design. The program calls for the development and delivery of eight prototype solar heating and cooling systems for installation and operational test. Two heating and six heating and cooling units will be delivered for Single Family Residences, Multiple-family Residences and commercial applications.

  18. The Rapid Geodetic Survey System (RGSS)

    NASA Astrophysics Data System (ADS)

    Huddle, J. R.

    1989-06-01

    The Rapid Geodetic Survey System (RGSS) is a system employing a high-accuracy gimbaled inertial platform. It provides a cost-effective capability for accurate direct measurement of the change in position, elevation, gravity intensity and deflection of the vertical from an initial point. The RGSS is an adaptation of the production version of the U.S. Army Position and Azimuth Determining System (PADS). Several hardware and software enhancements to improve the performance of the system, primarily for gravity vector survey, have occurred over the last few years. The basic principles for the control of error in the survey measurements due to noise and systematic error are discussed below. Actual acceptance test results for the RGSS which indicate an inherent capability of the system to measure change in the deflection of the vertical to a few-tenths of an arcsecond over survey periods of one to two hours using careful survey techniques are also presented. Finally a simple method to extend the capability of the system for longer duration surveys is indicated.

  19. The Rapid Geodetic Survey System (RGSS)

    NASA Technical Reports Server (NTRS)

    Huddle, J. R.

    1989-01-01

    The Rapid Geodetic Survey System (RGSS) is a system employing a high-accuracy gimbaled inertial platform. It provides a cost-effective capability for accurate direct measurement of the change in position, elevation, gravity intensity and deflection of the vertical from an initial point. The RGSS is an adaptation of the production version of the U.S. Army Position and Azimuth Determining System (PADS). Several hardware and software enhancements to improve the performance of the system, primarily for gravity vector survey, have occurred over the last few years. The basic principles for the control of error in the survey measurements due to noise and systematic error are discussed below. Actual acceptance test results for the RGSS which indicate an inherent capability of the system to measure change in the deflection of the vertical to a few-tenths of an arcsecond over survey periods of one to two hours using careful survey techniques are also presented. Finally a simple method to extend the capability of the system for longer duration surveys is indicated.

  20. Active cooling for downhole instrumentation: Preliminary analysis and system selection

    SciTech Connect

    Bennett, G.A.

    1988-03-01

    A feasibility study and a series of preliminary designs and analyses were done to identify candidate processes or cycles for use in active cooling systems for downhole electronic instruments. A matrix of energy types and their possible combinations was developed and the energy conversion process for each pari was identified. The feasibility study revealed conventional as well as unconventional processes and possible refrigerants and identified parameters needing further clarifications. A conceptual design or series od oesigns for each system was formulated and a preliminary analysis of each design was completed. The resulting coefficient of performance for each system was compared with the Carnot COP and all systems were ranked by decreasing COP. The system showing the best combination of COP, exchangeability to other operating conditions, failure mode, and system serviceability is chosen for use as a downhole refrigerator. 85 refs., 48 figs., 33 tabs.

  1. Online Retrieval Systems Users Survey from Texas.

    ERIC Educational Resources Information Center

    White, Phillip M.

    Based on a survey of 160 Texas college and university libraries, this study reports on their access to and usage of 3 online information retrieval systems: Bibliographic Retrieval Services (BRS), Lockheed's DIALOG Information Services, and System Development Corporation's ORBIT Information Retrieval System. The study finds that 24 percent of all…

  2. Agroforestry Systems In Poland A Preliminary Identification

    NASA Astrophysics Data System (ADS)

    Borek, Robert

    2015-01-01

    This paper seeks to use state-of-the-art knowledge to depict the foundations and prospects for agroforestry systems in Poland to develop, in line with political, legal, historical and environmental conditions pertaining in the country. The main legal provisions concerning the presence of trees in agriculture are presented prior to a first-ever defining of key traditional agroforestry systems in Poland.

  3. An Integrated Library System: Preliminary Considerations.

    ERIC Educational Resources Information Center

    Neroda, Edward

    Noting difficulties experienced by small to medium sized colleges in acquiring integrated library computer systems, this position paper outlines issues related to the subject with the intention of increasing familiarity and interest in integrated library systems. The report includes: a brief review of technological advances as they relate to…

  4. A Preliminary Instructional Model for a Computerized Training System.

    ERIC Educational Resources Information Center

    Kimberlin, D. A.

    A preliminary instructional model suitable for lesson preparation for a Computerized Training System is described. Topics discussed include general course architecture, general course structure, and the training decision process. Guidelines for the design of the model are presented and information is provided on the adaptation of the model to…

  5. COMMUNITY WATER SYSTEM SURVEY (CWSS)

    EPA Science Inventory

    Resource Purpose:The CWSS is a national random sample of approximately 2,000 community water systems. The primary purpose of the CWSS is to provide OGWDW with data on the financial and operating characteristics of water systems. This information is used to support the o...

  6. An integrated computer system for preliminary design of advanced aircraft.

    NASA Technical Reports Server (NTRS)

    Fulton, R. E.; Sobieszczanski, J.; Landrum, E. J.

    1972-01-01

    A progress report is given on the first phase of a research project to develop a system of Integrated Programs for Aerospace-Vehicle Design (IPAD) which is intended to automate to the largest extent possible the preliminary and detailed design of advanced aircraft. The approach used is to build a pilot system and simultaneously to carry out two major contractual studies to define a practical IPAD system preparatory to programing. The paper summarizes the specifications and goals of the IPAD system, the progress to date, and any conclusion reached regarding its feasibility and scope. Sample calculations obtained with the pilot system are given for aircraft preliminary designs optimized with respect to discipline parameters, such as weight or L/D, and these results are compared with designs optimized with respect to overall performance parameters, such as range or payload.

  7. Preliminary conceptual design of DEMO EC system

    SciTech Connect

    Garavaglia, S. Bin, W.; Bruschi, A.; Granucci, G.; Moro, A.; Rispoli, N.; Grossetti, G.; Strauss, D.; Jelonnek, J.; Tran, Q. M.; Franke, T.

    2015-12-10

    In the framework of EUROfusion Consortium the Work Package Heating and Current Drive addresses the engineering design and R&D for the electron cyclotron, ion cyclotron and neutral beam systems. This paper reports the activities performed in 2014, focusing on the work done regarding the input for the conceptual design of the EC system, particularly for the gyrotron, the transmission line and the launchers.

  8. Preliminary conceptual design of DEMO EC system

    NASA Astrophysics Data System (ADS)

    Garavaglia, S.; Bin, W.; Bruschi, A.; Granucci, G.; Grossetti, G.; Jelonnek, J.; Moro, A.; Rispoli, N.; Strauss, D.; Tran, Q. M.; Franke, T.

    2015-12-01

    In the framework of EUROfusion Consortium the Work Package Heating and Current Drive addresses the engineering design and R&D for the electron cyclotron, ion cyclotron and neutral beam systems. This paper reports the activities performed in 2014, focusing on the work done regarding the input for the conceptual design of the EC system, particularly for the gyrotron, the transmission line and the launchers.

  9. Environmental Survey preliminary report, Department of Energy (DOE) activities at Santa Susana Field Laboratories, Ventura County, California

    SciTech Connect

    Not Available

    1989-02-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) activities at the Santa Susana Field Laboratories Site (DOE/SSFL), conducted May 16 through 26, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual participants for the Survey team are being supplied by an private contractor. The objective of the survey is to identify environmental problems and areas of environmental risk associated with DOE activities at SSFL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at SSFL, and interviews with site personnel. 90 refs., 17 figs., 28 tabs.

  10. Preliminary Results of the Herschel Gould Belt Survey in the Orion B Complex

    NASA Astrophysics Data System (ADS)

    Könyves, Vera; André, Philippe; Palmeirim, Pedro; Schneider, Nicola; Arzoumanian, Doris; Men'shchikov, Alexander

    As a preliminary result of the Herschel Gould Belt survey (André et al. 2010) in the Orion B cloud complex we find a clear connection between the locations of the detected prestellar cores and the column density values. We find that the vast majority of the gravitationally bound prestellar cores are detected above a high column density of about 6-7 × 1021 cm-2 (A V ˜ 6-7). This is in very good agreement with dense core formation thresholds found in other regions. For Orion B, a similar limit appears both in the distribution of background column density values of the prestellar cores, and in the column density PDF of the region. Within our core formation scenario, the found threshold can be translated as the column density above which the filaments become gravitationally unstable and fragment into cores.

  11. Video imaging systems: A survey

    SciTech Connect

    Kefauver, H.L.

    1989-07-01

    Recent technological advances in the field of electronics have made video imaging a viable substitute for the traditional Polaroid/trademark/ picture used to create photo ID credentials. New families of hardware and software products, when integrated into a system, provide an exciting and powerful toll which can be used simply to make badges or enhance an access control system. This report is designed to make the reader aware of who is currently in this business and compare their capabilities.

  12. Preliminary systems design study assessment report

    SciTech Connect

    Mayberry, J.L.; Feizollahi, F.; Del Signore, J.C.

    1991-10-01

    The System Design Study (SDS), part of the Waste Technology Development Department of the Idaho National Engineering Laboratory (INEL), examined techniques available for the remediation of hazardous and transuranic waste stored at the Radioactive Waste Management Complex's Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each concept. The SDS results are published in eight volumes. Volume I contains an executive summary. The SDS summary and analysis of results are presented in Volume II. Volumes III through VII contain descriptions of twelve system and four subsystem concepts. Volume VIII contains the appendixes.

  13. Land Use Systems Model. Technical Report. Preliminary.

    ERIC Educational Resources Information Center

    Austin, W. Burnet

    Since the service requirements of a utility depend on the distribution of population and land use in the service area, the planning for future requirements depends on accurate projections of future distributions. This systems approach model organizes land use data as an aid to facility planning. Included as variables are residential, commercial,…

  14. PRELIMINARY ENVIRONMENTAL ASSESSMENT OF AFTERBURNER COMBUSTION SYSTEMS

    EPA Science Inventory

    The report gives results of an environmental assessment of afterburner control systems (fume incinerators). It consisted of a review of available data and literature, and the planning of a subsequent experimental program, intended to consist of laboratory and/or field emission me...

  15. Inertial navigation system for directional surveying

    SciTech Connect

    Kohler, S.M.

    1982-09-01

    A Wellbore Inertial Navigation System (WINS) was developed and tested. Developed for directional surveying of geothermal, oil, and gas wells, the system uses gyros and accelerometers to obtain survey errors of less than 10 ft (approx. 3 m) in a 10,000-ft (approx. 300-m) well. The tool, which communicates with a computer at the surface, is 4 in. (approx. 10 cm) in diameter and 20 ft (approx. 6.1 m) long. The concept and hardware is based on a system developed by Sandia for flight vehicles.

  16. Surveying of the solar system

    NASA Technical Reports Server (NTRS)

    Gehrels, Tom

    1991-01-01

    Some populations of objects in the solar system are poorly known, and the long range goal of this program is to improve that situation. For instance, the statistics of Trojan asteroids is being studied. A new technique is being developed for sky surveillance by scanning with CCD, particularly for the discovery of near Earth asteroids.

  17. Surveying Users of Automated Turnkey Systems.

    ERIC Educational Resources Information Center

    Schwarz, Philip

    1983-01-01

    Provides survey questions designed to be used to gather information required in library decision-making process for selection of automated circulation system. User library profile, system profile, hardware and software profiles, interactive workload, service, staff support requirements, educational support, bibliographic/item database, patron…

  18. Preliminary dose comparisons for the MRS Systems Study

    SciTech Connect

    Pelto, P.J.; Lavender, J.C.

    1989-04-01

    This report provides preliminary information on the radiological doses to the public and the workers for alternative system configurations proposed in the MRS Systems Study. Information published in the MRS Environmental Assessment (DOE 1986) was used as a basis for this analysis. The risk differences between alternative configurations were found to be small and should not be viewed as a major factor in selecting alternative configurations. 1 ref.

  19. Preliminary design package for solar heating and cooling systems

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Summarized preliminary design information on activities associated with the development, delivery and support of solar heating and cooling systems is given. These systems are for single family dwellings and commercial applications. The heating/cooling system use a reversible vapor compression heat pump that is driven in the cooling mode by a Rankine power loop, and in the heating mode by a variable speed electric motor. The heating/cooling systems differ from the heating-only systems in the arrangement of the heat pump subsystem and the addition of a cooling tower to provide the heat sink for cooling mode operation.

  20. Preliminary design of the Space Station internal thermal control system

    NASA Technical Reports Server (NTRS)

    Herrin, Mark T.; Patterson, David W.; Turner, Larry D.

    1987-01-01

    The baseline preliminary design configuration of the Internal Thermal Control system (ITCS) of the U.S. Space Station pressurized elements (i.e., the Habitation and U.S. Laboratory modules, pressurized logistics carrier, and resources nodes) is defined. The ITCS is composed of both active and passive components. The subsystems which comprise the ITCS are identified and their functional descriptions are provided. The significant trades and analyses, which were performed during Phase B (i.e., the preliminary design phase) that resulted in the design described herein, are discussed. The ITCS interfaces with the station's central Heat Rejection and Transport System (HRTS), other systems, and externally attached pressurized payloads are described. Requirements on the ITCS with regard to redundancy and experiment support are also addressed.

  1. Telecommunications Research in the United States and Selected Foreign Countries: A Preliminary Survey. Volume II, Individual Contributions.

    ERIC Educational Resources Information Center

    National Academy of Engineering, Washington, DC. Committee on Telecommunications.

    At the request of the National Science Foundation, the Panel on Telecommunications Research of the Committee on Telecommunications of the National Academy of Engineering has made a preliminary survey of the status and trends of telecommunications research in the United States and selected foreign countries. The status and trends were identified by…

  2. Alchemical poetry in medieval and early modern Europe: a preliminary survey and synthesis. Part II - Synthesis.

    PubMed

    Kahn, Didier

    2011-03-01

    This article provides a preliminary description of medieval and early modern alchemical poetry composed in Latin and in the principal vernacular languages of western Europe. It aims to distinguish the various genres in which this poetry flourished, and to identify the most representative aspects of each cultural epoch by considering the medieval and early modern periods in turn. Such a distinction (always somewhat artificial) between two broad historical periods may be justified by the appearance of new cultural phenomena that profoundly modified the character of early modern alchemical poetry: the ever-increasing importance of the prisca theologia, the alchemical interpretation of ancient mythology, and the rise of neo-Latin humanist poetry. Although early modern alchemy was marked by the appearance of new doctrines (notably the alchemical spiritus mundi and Paracelsianism), alchemical poetry was only superficially modified by criteria of a scientific nature, which therefore appear to be of lesser importance. This study falls into two parts. Part I provides a descriptive survey of extant poetry, and in Part II the results of the survey are analysed in order to highlight such distinctive features as the function of alchemical poetry, the influence of the book market on its evolution, its doctrinal content, and the question of whether any theory of alchemical poetry ever emerged. Part II is accompanied by an index of the authors and works cited in both parts. PMID:21797075

  3. 76 FR 67179 - Spartanburg Water System; Notice of Preliminary Permit Application Accepted for Filing and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-31

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Spartanburg Water System; Notice of Preliminary Permit Application Accepted..., Spartanburg Water System (Spartanburg) filed an application for a preliminary permit, pursuant to section...

  4. 77 FR 16220 - Spartanburg Water System; Notice of Preliminary Permit Application Accepted for Filing and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-20

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Spartanburg Water System; Notice of Preliminary Permit Application Accepted..., 2011, Spartanburg Water System (Spartanburg) filed an application for a preliminary permit, pursuant...

  5. Windshear detection and avoidance - Airborne systems survey

    NASA Technical Reports Server (NTRS)

    Bowles, Roland L.

    1990-01-01

    Functional requirements for airborne windshear detection and warning systems are discussed in terms of the threat posed to civil aircraft operations. A preliminary set of performance criteria for predictive windshear detection and warning systems is defined. Candidate airborne remote sensor technologies based on microwave Doppler radar, Doppler laser radar (lidar), and infrared radiometric techniques are discussed in the context of overall system requirements, and the performance of each sensor is assessed for representative microburst environments and ground clutter conditions. Preliminary simulation results demonstrate that all three sensors show potential for detecting windshear, and provide adequate warning time to allow flight crews to avoid the affected area or escape from the encounter. Radar simulation and analysis show that by using bin-to-bin automatic gain control, clutter filtering, limited detection range, and suitable antenna tilt management, windshear from wet microbursts can be accurately detected. Although a performance improvement can be obtained at higher radar frequency, the baseline X-band system also detected the presence of windshear hazard for a dry microburst. Simulation results of end-to-end performance for competing coherent lidar systems are presented.

  6. 40 CFR 35.927-2 - Sewer system evaluation survey.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Sewer system evaluation survey. 35.927... § 35.927-2 Sewer system evaluation survey. (a) The sewer system evaluation survey shall identify the... results of the sewer system evaluation survey. In addition, the report shall include: (1) A...

  7. 40 CFR 35.927-2 - Sewer system evaluation survey.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Sewer system evaluation survey. 35.927... § 35.927-2 Sewer system evaluation survey. (a) The sewer system evaluation survey shall identify the... results of the sewer system evaluation survey. In addition, the report shall include: (1) A...

  8. 33 CFR 157.435 - Vital systems surveys.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Vital systems surveys. 157.435... systems surveys. (a) A tank vessel owner or operator shall ensure that surveys of the following systems are conducted: (1) Cargo systems. The survey must include the examination and testing of the...

  9. 40 CFR 35.927-2 - Sewer system evaluation survey.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Sewer system evaluation survey. 35.927... § 35.927-2 Sewer system evaluation survey. (a) The sewer system evaluation survey shall identify the... results of the sewer system evaluation survey. In addition, the report shall include: (1) A...

  10. 33 CFR 157.435 - Vital systems surveys.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Vital systems surveys. 157.435... systems surveys. (a) A tank vessel owner or operator shall ensure that surveys of the following systems are conducted: (1) Cargo systems. The survey must include the examination and testing of the...

  11. 33 CFR 157.435 - Vital systems surveys.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Vital systems surveys. 157.435... systems surveys. (a) A tank vessel owner or operator shall ensure that surveys of the following systems are conducted: (1) Cargo systems. The survey must include the examination and testing of the...

  12. 33 CFR 157.435 - Vital systems surveys.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Vital systems surveys. 157.435... systems surveys. (a) A tank vessel owner or operator shall ensure that surveys of the following systems are conducted: (1) Cargo systems. The survey must include the examination and testing of the...

  13. 33 CFR 157.435 - Vital systems surveys.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Vital systems surveys. 157.435... systems surveys. (a) A tank vessel owner or operator shall ensure that surveys of the following systems are conducted: (1) Cargo systems. The survey must include the examination and testing of the...

  14. Preliminary Design and Analysis of the ARES Atmospheric Flight Vehicle Thermal Control System

    NASA Technical Reports Server (NTRS)

    Gasbarre, J. F.; Dillman, R. A.

    2003-01-01

    The Aerial Regional-scale Environmental Survey (ARES) is a proposed 2007 Mars Scout Mission that will be the first mission to deploy an atmospheric flight vehicle (AFV) on another planet. This paper will describe the preliminary design and analysis of the AFV thermal control system for its flight through the Martian atmosphere and also present other analyses broadening the scope of that design to include other phases of the ARES mission. Initial analyses are discussed and results of trade studies are presented which detail the design process for AFV thermal control. Finally, results of the most recent AFV thermal analysis are shown and the plans for future work are discussed.

  15. The Dark Energy Survey Data Management System

    SciTech Connect

    Mohr, Joseph J.; Barkhouse, Wayne; Beldica, Cristina; Bertin, Emmanuel; Dora Cai, Y.; Nicolaci da Costa, Luiz A.; Darnell, J.Anthony; Daues, Gregory E.; Jarvis, Michael; Gower, Michelle; Lin, Huan; /Fermilab /Rio de Janeiro Observ.

    2008-07-01

    The Dark Energy Survey (DES) collaboration will study cosmic acceleration with a 5000 deg2 griZY survey in the southern sky over 525 nights from 2011-2016. The DES data management (DESDM) system will be used to process and archive these data and the resulting science ready data products. The DESDM system consists of an integrated archive, a processing framework, an ensemble of astronomy codes and a data access framework. We are developing the DESDM system for operation in the high performance computing (HPC) environments at the National Center for Supercomputing Applications (NCSA) and Fermilab. Operating the DESDM system in an HPC environment offers both speed and flexibility. We will employ it for our regular nightly processing needs, and for more compute-intensive tasks such as large scale image coaddition campaigns, extraction of weak lensing shear from the full survey dataset, and massive seasonal reprocessing of the DES data. Data products will be available to the Collaboration and later to the public through a virtual-observatory compatible web portal. Our approach leverages investments in publicly available HPC systems, greatly reducing hardware and maintenance costs to the project, which must deploy and maintain only the storage, database platforms and orchestration and web portal nodes that are specific to DESDM. In Fall 2007, we tested the current DESDM system on both simulated and real survey data. We used TeraGrid to process 10 simulated DES nights (3TB of raw data), ingesting and calibrating approximately 250 million objects into the DES Archive database. We also used DESDM to process and calibrate over 50 nights of survey data acquired with the Mosaic2 camera. Comparison to truth tables in the case of the simulated data and internal crosschecks in the case of the real data indicate that astrometric and photometric data quality is excellent.

  16. Dual energy use systems: District heating survey

    NASA Astrophysics Data System (ADS)

    1980-07-01

    The current status of and problems facing district heating systems operated by electric utilities were identified. The technical and economic factors which can affect the present and future success of district heating systems in the United States were evaluated. A survey of 59 district heating electric utilities was conducted to determine the current status of the industry. Questions developed to obtain data on technical, economic, regulator, and marketing factors were included in the survey. Literature on district heating in the U.S. and abroad was collected from governments, industry and foreign sources and reviewed to aid in evaluating the current and future potential of the industry. Interviews were held with executives of 16 utilities that operate district heating systems in order to determine corporate attitudes. A summary of the literature obtained is provided. Survey results are tabulated and described. The interviews and survey data were used to compile 10 case studies of utilities operating district heating systems under a braod range of circumstances.

  17. A preliminary survey of the practice patterns of United States Guild Certified Feldenkrais PractitionersCM

    PubMed Central

    2010-01-01

    Background The Feldenkrais Method® of somatic education purports to guide people of varying ages and abilities to improve function. Many people choose this method to aid with recovery from injury, manage chronic conditions, or enhance performance even though limited research supporting its safety and effectiveness exists to guide decisions about use and referral. Very little information about practitioner characteristics and practice patterns is publicly available to assist researchers in the design of appropriate safety and effectiveness studies. The purpose of this study was to obtain an initial overview of the characteristics of United States Guild Certified Feldenkrais PractitionersCM. Methods Of 1300 certified Feldenkrais® practitioners at the time of the study, there were 1193 practitioners with email accounts who were sent invitations to complete a web-based survey. The survey inquired about practice locations, additional credentials, service patterns and workloads during the previous 3 months. Response rate and descriptive statistics were calculated. Results The survey had a 32.3% (385/1193) response rate. The top states in which responders practiced were California (n = 92) and New York (n = 44). Most responders did not hold other credentials as traditional health care providers or as complementary and alternative medicine providers. Among those who did, the most common credentials were physical therapist (n = 83) and massage therapist (n = 38). Just over a third of traditional health care providers only provided Feldenkrais lessons, compared to 59.3% of complementary and alternative providers. On average, responders saw 7.6 ± 8.1 (median = 5) clients per week for individual lessons, 8.4 ± 11.5 (median = 5) clients per week for group lessons, and 2.9 ± 3.9 (median = 2) new clients per month for individual lessons. Conclusions This preliminary survey of United States Guild Certified Feldenkrais Practitioners indicated that most practiced in the west

  18. Surveying rip current survivors: preliminary insights into the experiences of being caught in rip currents

    NASA Astrophysics Data System (ADS)

    Drozdzewski, D.; Shaw, W.; Dominey-Howes, D.; Brander, R.; Walton, T.; Gero, A.; Sherker, S.; Goff, J.; Edwick, B.

    2012-04-01

    This paper begins a process of addressing a significant gap in knowledge about people's responses to being caught in rip currents. While rip currents are the primary hazard facing recreational ocean swimmers in Australia, debate exists about the best advice to give swimmers caught in rip currents. Such surf rescue advice - on what to do and how to respond when caught in a rip - relies on empirical evidence. However, at present, knowledge about swimmers reactions and responses to rip currents is limited. This gap is a considerable barrier to providing effective advice to beach goers and to understanding how this advice is utilised (or not) when actually caught in the rip current. This paper reports the findings of a pilot study that focussed on garnering a better understanding of swimmers' experiences when caught in rip currents. A large scale questionnaire survey instrument generated data about rip current survivors' demographics, knowledge of beach safety and their reactions and responses when caught in a rip current. A mix of online and paper surveys produced a total of 671 completed surveys. Respondents were predominantly an informed group in terms of rip current knowledge, beach experience and had a high self-rated swimming ability. Preliminary insights from the survey show that most respondents recalled a "swim across the rip/parallel to the beach" message when caught in the rip and most escaped unassisted by acting on this message. However, while nearly a quarter of respondents recalled a message of "not to panic", short answer responses revealed that the onset of panic inhibited some respondents from recalling or enacting any other type of beach safety message when caught in the rip current. Results also showed that despite the research sample being younger, competent and frequent ocean swimmers, they were more likely to swim at unpatrolled beaches and outside of the red and yellow safety flags. Moreover, they were still caught in a rip current and they

  19. Survey of systems safety analysis methods and their application to nuclear waste management systems

    SciTech Connect

    Pelto, P.J.; Winegardner, W.K.; Gallucci, R.H.V.

    1981-11-01

    This report reviews system safety analysis methods and examines their application to nuclear waste management systems. The safety analysis methods examined include expert opinion, maximum credible accident approach, design basis accidents approach, hazard indices, preliminary hazards analysis, failure modes and effects analysis, fault trees, event trees, cause-consequence diagrams, G0 methodology, Markov modeling, and a general category of consequence analysis models. Previous and ongoing studies on the safety of waste management systems are discussed along with their limitations and potential improvements. The major safety methods and waste management safety related studies are surveyed. This survey provides information on what safety methods are available, what waste management safety areas have been analyzed, and what are potential areas for future study.

  20. Environmental Survey preliminary report, Naval Petroleum and Oil Shale Reserves in Colorado, Utah, and Wyoming, Casper, Wyoming

    SciTech Connect

    Not Available

    1989-02-01

    This report presents the preliminary environmental findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Naval Petroleum and Oil Shale Reserves in Colorado, Utah, and Wyoming (NPOSR-CUW) conducted June 6 through 17, 1988. NPOSR consists of the Naval Petroleum Reserve No. 3 (NPR-3) in Wyoming, the Naval Oil Shale Reserves No. 1 and 3 (NOSR-1 and NOSR-3) in Colorado and the Naval Oil Shale Reserve No. 2 (NOSR-2) in Utah. NOSR-2 was not included in the Survey because it had not been actively exploited at the time of the on-site Survey. The Survey is being conducted by an interdisciplinary team of environmental specialists, lead and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with NPOSR. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at NPOSR and interviews with site personnel. The Survey team has developed a Sampling and Analysis Plan to assist in further assessing specific environmental problems identified at NOSR-3 during the on-site Survey. There were no findings associated with either NPR-3 or NOSR-1 that required Survey-related sampling and Analysis. The Sampling and Analysis Plan will be executed by Idaho National Engineering Laboratory. When completed, the results will be incorporated into the Environmental Survey Summary report. The Summary Report will reflect the final determinations of the NPOSR-CUW Survey and the other DOE site-specific Surveys. 110 refs., 38 figs., 24 tabs.

  1. Raising future forensic pathologists (first report): results of a preliminary questionnaire survey.

    PubMed

    Murakami, Manabu; Matoba, Kotaro; Terazawa, Koichi

    2012-08-01

    The shortage of future forensic pathologists is a serious problem both in Japan and overseas. In Japan, however, factors such as government budget cuts and increasing the autopsy rates, make the condition even worse. In an attempt to improve this situation, we implemented a questionnaire survey to investigate the particular features necessary when selecting a career in forensic medicine. As a preliminary study, we sent the questionnaire along with an anonymous answer sheet to all forensic pathologists with a degree in medicine M.D., who were affiliated with universities in Hokkaido and the Tohoku district of Japan as of August 2011. Thirteen physicians in nine universities (response rate 77.8%) returned the answer sheet. Characteristics of participants are listed below: years of experience, board specialty and number of years as board certified specialists, percentage of work effort spent on autopsy practice, the time when they decided to work as a forensic pathologist, the time when to best recommend forensic pathologist as a career, and crucial factors in choosing the specialty of forensic medicine. As a result of this research, we've revealed the importance of undergraduate medical education or the effect on the role models. Furthermore, we've also extracted miscellaneous comments, such as standardization of minimum requirements. In our study, we' ve found some clues to increase future candidates in the field forensic medicine. However, we must collect further samples for our questionnaire survey to validate the study, and, as a future project, we must also address this problem at the congress of forensic medicine. PMID:23016267

  2. Preliminary Results from the Wide-field Infrared Survey Explorer's NEOWISE Search for Minor Planets

    NASA Astrophysics Data System (ADS)

    Mainzer, A.; Bauer, J. M.; Grav, T.; Masiero, J.; McMillan, R. S.; Walker, R.; Tholen, D. J.; Wright, E.; Eisenhardt, P.; Cutri, R.; Neowise Team

    2011-12-01

    The Wide-Field Infrared Survey Explorer (WISE) imaged the entire sky twice between January, 2010 and January, 2011 at four wavelengths spanning the near through mid-IR at sensitivities hundreds of times greater than previous surveys [1]. The WISE band-passes (3.4, 4.6, 12 and 22mm) sample the flux from most inner-solar-system bodies near the peak of their thermal emission. Overlapping sky regions were sampled repeatedly at 3 hour intervals. The same region of sky was observed a minimum of 8 times. While the primary WISE science objectives focus on ultra-luminous infrared galaxies and brown dwarfs, additions to the baseline WISE pipeline (collectively known as "NEOWISE") have enabled the detection of undiscovered moving objects, as well as previously known bodies [2]. NEOWISE has detected more than 155,000 minor planets, including more than 500 near-Earth objects (NEOs), ~2000 Jupiter Trojans, ~120 comets, and ~20 outer Solar System objects such as Centaurs. The survey has discovered ~34,000 new minor planets, including 130 new NEOs and 20 new comets. The NEOWISE data will drive a wide range of new Solar System investigations. NEOWISE allows precise determination of IR-derived diameters and albedos for minor planets throughout the Solar System [3],[4]. We will summarize the latest results from the project, including studies of the statistical properties of asteroid populations such as the NEOs, and comparisons between albedo and asteroid taxonomic classification.

  3. NASA contributions to fluidic systems: A survey

    NASA Technical Reports Server (NTRS)

    Weathers, T. M.

    1972-01-01

    A state-of-the art review of fluidic technology is presented. It is oriented towards systems applications rather than theory or design. It draws heavily upon work performed or sponsored by NASA in support of the space program and aeronautical research and development (R&D). Applications are emphasized in this survey because it is hoped that the examples described and the criteria presented for evaluating the suitability of fluidics to new applications will be of value to potential users of fluidic systems. This survey of the fluidics industry suggests some of the means whereby a company may use a fluidic system effectively either to manufacture a product or as part of the end product.

  4. Inertial instrument system for aerial surveying

    USGS Publications Warehouse

    Brown, R.H.; Chapman, W.H.; Hanna, W.F.; Mongan, C.E.; Hursh, J.W.

    1985-01-01

    An inertial guidance system for aerial surveying has been developed under contract to the U.S. Geological Survey. This prototype system, known as the aerial profiling of terrain (APT) system, is designed to determine continuously the positions of points along an aircraft flight path, or the underlying terrain profile, to an accuracy of + or - 0.5 ft (15 cm) vertically and + or - 2 ft (61 cm) horizontally. The system 's objective thus is to accomplish, from a fixed-wing aircraft, what would traditionally be accomplished from ground-based topographic surveys combined with aerial photography and photogrammetry. The two-part strategy for measuring the terrain profile entails: (1) use of an inertial navigator for continuous determination of the three-coordinate position of the aircraft, and (2) use of an eye-safe pulsed laser profiler for continuous measurement of the vertical distance from aircraft to land surface, so that the desired terrain profile can then be directly computed. The APT system, installed in a DeHavilland Twin Otter aircraft, is typically flown at a speed of 115 mph (105 knots) at an altitude of 2,000 ft (610 m) above the terrain. Performance-evaluation flights have shown that the vertical and horizontal accuracy specifications are met. (USGS)

  5. Aerodynamic preliminary analysis system 2. Part 2: User's manuals

    NASA Technical Reports Server (NTRS)

    Divan, P.

    1981-01-01

    An aerodynamic analysis system based on potential theory at subsonic/supersonic speeds and impact type finite element solutions at hypersonic conditions is described. Three dimensional configurations having multiple nonplanar surfaces of arbitrary planform and bodies of noncircular contour may be analyzed. Static, rotary, and control longitudinal and lateral directional chracteristics may be generated. The analysis has been implemented on a time sharing system in conjunction with an input tablet digitizer and an interactive graphics input/output display and editing terminal to maximize its responsiveness to the preliminary analysis problem. Typical simulation indicates that program provides an efficient analysis for systematically performing various aerodynamic configuration tradeoff and evaluation studies.

  6. Preliminary design study of the TMT Telescope structure system: overview

    NASA Astrophysics Data System (ADS)

    Usuda, Tomonori; Ezaki, Yutaka; Kawaguchi, Noboru; Nagae, Kazuhiro; Kato, Atsushi; Takaki, Junji; Hirano, Masaki; Hattori, Tomoya; Tabata, Masaki; Horiuchi, Yasushi; Saruta, Yusuke; Sofuku, Satoru; Itoh, Noboru; Oshima, Takeharu; Takanezawa, Takashi; Endo, Makoto; Inatani, Junji; Iye, Masanori; Sadjadpour, Amir; Sirota, Mark; Roberts, Scott; Stepp, Larry

    2014-07-01

    We present an overview of the preliminary design of the Telescope Structure System (STR) of Thirty Meter Telescope (TMT). NAOJ was given responsibility for the TMT STR in early 2012 and engaged Mitsubishi Electric Corporation (MELCO) to take over the preliminary design work. MELCO performed a comprehensive preliminary design study in 2012 and 2013 and the design successfully passed its Preliminary Design Review (PDR) in November 2013 and April 2014. Design optimizations were pursued to better meet the design requirements and improvements were made in the designs of many of the telescope subsystems as follows: 1. 6-legged Top End configuration to support secondary mirror (M2) in order to reduce deformation of the Top End and to keep the same 4% blockage of the full aperture as the previous STR design. 2. "Double Lower Tube" of the elevation (EL) structure to reduce the required stroke of the primary mirror (M1) actuators to compensate the primary mirror cell (M1 Cell) deformation caused during the EL angle change in accordance with the requirements. 3. M1 Segment Handling System (SHS) to be able to make removing and installing 10 Mirror Segment Assemblies per day safely and with ease over M1 area where access of personnel is extremely difficult. This requires semi-automatic sequence operation and a robotic Segment Lifting Fixture (SLF) designed based on the Compliance Control System, developed for controlling industrial robots, with a mechanism to enable precise control within the six degrees of freedom of position control. 4. CO2 snow cleaning system to clean M1 every few weeks that is similar to the mechanical system that has been used at Subaru Telescope. 5. Seismic isolation and restraint systems with respect to safety; the maximum acceleration allowed for M1, M2, tertiary mirror (M3), LGSF, and science instruments in 1,000 year return period earthquakes are defined in the requirements. The Seismic requirements apply to any EL angle, regardless of the

  7. Aerodynamic preliminary analysis system 2. Part 1: Theory

    NASA Technical Reports Server (NTRS)

    Bonner, E.; Clever, W.; Dunn, K.

    1991-01-01

    An aerodynamic analysis system based on potential theory at subsonic and/or supersonic speeds and impact type finite element solutions at hypersonic conditions is described. Three dimensional configurations having multiple nonplanar surfaces of arbitrary planform and bodies of noncircular contour may be analyzed. Static, rotary, and control longitudinal and lateral directional characteristics may be generated. The analysis was implemented on a time sharing system in conjunction with an input tablet digitizer and an interactive graphics input/output display and editing terminal to maximize its responsiveness to the preliminary analysis problem. The program provides an efficient analysis for systematically performing various aerodynamic configuration tradeoff and evaluation studies.

  8. Field survey and preliminary modeling of the 2011 Tohoku tsunami at Jayapura, Papua, Indonesia

    NASA Astrophysics Data System (ADS)

    Prasetya, T.; Harjadi, P.; Nugroho, C.; Okal, E.; Synolakis, C.; Kalligeris, N.

    2011-12-01

    The 2011 Tohoku tsunami was unexpectedly severe at Jayapura (2 S; 140 E), in the Easternmost part of the province of Papua, Indonesia, although it is clearly located outside the lobe of main radiation from the source. Although tidal gauge records did not exceed 80 cm at the harbor, run-up reached 2.8 m in the Southern part of the bay, characterized by very shallow dipping bathymetry. Several houses were destroyed in an ocean village, which fortunately had been evacuated following a warning issued by BMKG. One person was killed when the motorcycle he was riding was swept by the wave, apparently the only casualty of the tsunami in the far field. A river bridge was destroyed, and large shipping containers moved more than 100 m inland. A remarkable aspect of these observations is the papparent delay (at least 2 hours and possibly up to 7) of the main destruction, relative to the first arrival of the wave under the shallow water approximation. This tentatively suggests the influence of dispersed higher-frequency components. We will present the result of the survey and a discussion of preliminary modeling of the effect of bathymetric features in the Caroline basin, and of the non-linear response of the Bay of Jayapura in an attempt to explain the exceptional character of the tsunami at that location.

  9. Volatile nitrosamines in foods and beverages: preliminary survey of the Italian market

    SciTech Connect

    Gavinelli, M.; Fanelli, R.; Bonfanti, M.; Davoli, E.; Airoldi, L.

    1988-01-01

    The question whether humans suffer from cancer as a result of exposure to N-nitroso compounds has not been yet answered. Food is one of the sources of human exposure to these compounds, and during the past decade considerable attention has in fact been paid to the identification and quantitative determination of N-nitroso compounds in food, volatile N-nitrosamines being those studied most extensively. Many studies have been made in different countries to establish the degree of contamination of foodstuffs typical for each country and to identify the efforts needed to remove or at least reduce their presence in the environment. So far, there are only a few reports of nitrosamines in Italian cheese and beers, but no extensive studies have been made in Italy. The authors present here a preliminary survey on volatile nitrosamine content in foods and beverages on the Italian market, including canned beef, pork, poultry, cured meat, milk products, domestic Italian canned wines and beers. A recently developed methods used for measuring nitrosamines in solid food matrices by simultaneous distillation-extraction followed by high resolution gas chromatography-thermal energy analysis (HRGC-TEA). Liquid food matrices and beverages were screened for nitrosamine content after column extraction and HRGC-TEA.

  10. The Development and Preliminary Validation of the Pediatric Survey of Pain Attitudes

    PubMed Central

    Engel, Joyce M.; Jensen, Mark P.; Ciol, Marcia A.; Bolen, G. Michelle

    2016-01-01

    Objective Biopsychosocial models of pain hypothesize patient attitudes and beliefs about pain play a key role in adjustment to chronic pain. The purpose of this study was to facilitate research testing the utility of biopsychosocial models in youths with physical disabilities by developing and testing the validity of a measure of pain-related beliefs that could be used with younger patients. Design One hundred and four youths with physical disabilities were administered, via interview, a measure of pain-related beliefs developed for youths with chronic pain – the Pediatric Survey of Pain Attitudes (Peds-SOPA) – and a modified Brief Pain Inventory Pain Interference scale (BPI). Results Item analyses yielded a 29-item pain belief attribution that assessed seven belief domains. The internal consistency (Cronbach’s alpha) of the subscales varied from good to excellent (.67 – .92). Pearson correlations between Peds-SOPA and the modified BPI showed moderate associations between pain beliefs and pain interference for the Medical Cure (r = .29), Emotion (r = .27), and Disability (r = .36) scales. Conclusions The findings indicate the Peds-SOPA scales are reliable, and a subset of the scales is associated with an important pain-related domain (pain interference), providing preliminary support for the validity of the Peds-SOPA scales. PMID:22019973

  11. Preliminary evaluation of the effect of a dynamic preferential runway system upon community noise disturbance

    NASA Technical Reports Server (NTRS)

    Patterson, H. P.; Edmiston, R. P.; Connor, W. K.

    1972-01-01

    A dynamic preferential runway system (DPRS) was developed for John F. Kennedy International Airport for the purpose of controlling short term noise exposure in the neighboring communities. The DPRS is a computer-aided procedure for optimum selection of runways from the standpoint of noise and is based upon a community disturbance model which takes into account flyover levels, size of exposed populations, time of day and week, and persistence of overflights. A preliminary evaluation of the DPRS is presented on the basis of social survey data and telephone complaint records, for the trial period of August and September, 1971. Comparative use is made of data taken in a previous survey of the same community areas in 1969.

  12. Environmental Survey preliminary report, Idaho National Engineering Laboratory, Idaho Falls, Idaho and Component Development and Integration Facility, Butte, Montana

    SciTech Connect

    Not Available

    1988-09-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Idaho National Engineering Laboratory (INEL) and Component Development and Integration Facility (CDIF), conducted September 14 through October 2, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the INEL and CDIF. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations' carried on at the INEL and the CDIF, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The S A Plan will be executed by the Oak Ridge National Laboratory. When completed, the S A results will be incorporated into the INEL/CDIF Survey findings for inclusion into the Environmental Survey Summary Report. 90 refs., 95 figs., 77 tabs.

  13. Changes of Multiple Metal Accumulation (MMA) in New Orleans Soil: Preliminary Evaluation of Differences between Survey I (1992) and Survey II (2000)

    PubMed Central

    Mielke, Howard W.; Gonzales, Christopher; Powell, Eric; MielkeJr, Paul W.

    2005-01-01

    demonstrates that the soils of New Orleans have undergone a massive accumulation of metals. The preliminary results provide ideas about methods needed to further evaluate the changes between these surveys. PMID:16705833

  14. A Survey on Automatic Speaker Recognition Systems

    NASA Astrophysics Data System (ADS)

    Saquib, Zia; Salam, Nirmala; Nair, Rekha P.; Pandey, Nipun; Joshi, Akanksha

    Human listeners are capable of identifying a speaker, over the telephone or an entryway out of sight, by listening to the voice of the speaker. Achieving this intrinsic human specific capability is a major challenge for Voice Biometrics. Like human listeners, voice biometrics uses the features of a person's voice to ascertain the speaker's identity. The best-known commercialized forms of voice Biometrics is Speaker Recognition System (SRS). Speaker recognition is the computing task of validating a user's claimed identity using characteristics extracted from their voices. This literature survey paper gives brief introduction on SRS, and then discusses general architecture of SRS, biometric standards relevant to voice/speech, typical applications of SRS, and current research in Speaker Recognition Systems. We have also surveyed various approaches for SRS.

  15. Preliminary Experimental Results from a MARS Micro-CT System

    PubMed Central

    He, Peng; Yu, Hengyong; Thayer, Patrick; Jin, Xin; Xu, Qiong; Bennett, James; Tappenden, Rachael; Wei, Biao; Goldstein, Aaron; Renaud, Peter; Butler, Anthony; Butler, Phillip; Wang, Ge

    2013-01-01

    The Medipix All Resolution System (MARS) system is a commercial spectral/multi-energy micro-CT scanner designed and assembled by the MARS Bioimaging, Ltd. in New Zealand. This system utilizes the state-of-the-art Medipix photon-counting, energy-discriminating detector technology developed by a collaboration based at European Organization for Nuclear Research (CERN). In this paper, we report our preliminary experimental results using this system, including geometrical alignment, photon energy characterization, protocol optimization, and spectral image reconstruction. We produced our scan datasets with a multi-material phantom, and then applied ordered subset-simultaneous algebraic reconstruction technique (OS-SART) to reconstruct images in different energy ranges and principal component analysis (PCA) to evaluate spectral deviation between the energy ranges. PMID:22635175

  16. Cholangiocarcinoma--an automated preliminary detection system using MLP.

    PubMed

    Logeswaran, Rajasvaran

    2009-12-01

    Cholangiocarcinoma, cancer of the bile ducts, is often diagnosed via magnetic resonance cholangiopancreatography (MRCP). Due to low resolution, noise and difficulty is actually seeing the tumor in the images, especially by examining only a single image, there has been very little development of automated systems for cholangiocarcinoma diagnosis. This paper presents a computer-aided diagnosis (CAD) system for the automated preliminary detection of the tumor using a single MRCP image. The multi-stage system employs algorithms and techniques that correspond to the radiological diagnosis characteristics employed by doctors. A popular artificial neural network, the multi-layer perceptron (MLP), is used for decision making to differentiate images with cholangiocarcinoma from those without. The test results achieved was 94% when differentiating only healthy and tumor images, and 88% in a robust multi-disease test where the system had to identify the tumor images from a large set of images containing common biliary diseases. PMID:20052894

  17. Aerodynamic preliminary analysis system 2. Part 1: Theory

    NASA Technical Reports Server (NTRS)

    Bonner, E.; Clever, W.; Dunn, K.

    1981-01-01

    A subsonic/supersonic/hypersonic aerodynamic analysis was developed by integrating the Aerodynamic Preliminary Analysis System (APAS), and the inviscid force calculation modules of the Hypersonic Arbitrary Body Program. APAS analysis was extended for nonlinear vortex forces using a generalization of the Polhamus analogy. The interactive system provides appropriate aerodynamic models for a single input geometry data base and has a run/output format similar to a wind tunnel test program. The user's manual was organized to cover the principle system activities of a typical application, geometric input/editing, aerodynamic evaluation, and post analysis review/display. Sample sessions are included to illustrate the specific task involved and are followed by a comprehensive command/subcommand dictionary used to operate the system.

  18. Preliminary Considerations for Classifying Hazards of Unmanned Aircraft Systems

    NASA Technical Reports Server (NTRS)

    Hayhurst, Kelly J.; Maddalon, Jeffrey M.; Miner, Paul S.; Szatkowski, George N.; Ulrey, Michael L.; DeWalt, Michael P.; Spitzer, Cary R.

    2007-01-01

    The use of unmanned aircraft in national airspace has been characterized as the next great step forward in the evolution of civil aviation. To make routine and safe operation of these aircraft a reality, a number of technological and regulatory challenges must be overcome. This report discusses some of the regulatory challenges with respect to deriving safety and reliability requirements for unmanned aircraft. In particular, definitions of hazards and their classification are discussed and applied to a preliminary functional hazard assessment of a generic unmanned system.

  19. Infrared Applications In Transmission System Surveys

    NASA Astrophysics Data System (ADS)

    Nelson, Guy; Fernandez, Joe

    1988-01-01

    Five California Utilities participated in an electric power transmission and distribution system survey in the late fall of 1987. The survey consisted of visual and Infrared (IR) inspection of 12.5-kV to 230-kV AC transmission lines and equipment. This paper summarizes the results of the survey, including a cost/benefit analysis. The participating utilities, under Western Area Power Administration's sponsorship, were the City of Lodi, City of Roseville, Plumas-Sierra Rural Electric Cooperative, Sacramento Municipal Utility District, and Sierra Pacific Power Company. Three hundred miles of line and thirty substations were inspected using a helicopter and a high resolution infrared camera with visual recording capabilities. The transmission and distribution system covered a broad range of terrain; valleys, foothills, and mountains. All five utilities recognized the value of the IR inspection. The procedure gave the maintenance staff advanced notice of problem areas such as (1) loose connections on switches, (2) unbalanced lines, (3) poor splices, and (4) capacitor and transformer bank malfunction. In addition, the staff saw its potential in environmental and safety applications. The initial data shows an increased capacity carrying and reliability providing capability of about 50 KW per 100 transmission line miles. This capability increase results in a B/C ratio of about three. Other applications in transmission system surveys are worthy of study. These applications include power theft and vandalism. Also, the Utility can use technology as an effective public relations tool with customers by providing services such as roof and building envelope inspections.

  20. Enhanced Accident Tolerant Fuels for LWRS - A Preliminary Systems Analysis

    SciTech Connect

    Gilles Youinou; R. Sonat Sen

    2013-09-01

    The severe accident at Fukushima Daiichi nuclear plants illustrates the need for continuous improvements through developing and implementing technologies that contribute to safe, reliable and cost-effective operation of the nuclear fleet. Development of enhanced accident tolerant fuel contributes to this effort. These fuels, in comparison with the standard zircaloy – UO2 system currently used by the LWR industry, should be designed such that they tolerate loss of active cooling in the core for a longer time period (depending on the LWR system and accident scenario) while maintaining or improving the fuel performance during normal operations, operational transients, and design-basis events. This report presents a preliminary systems analysis related to most of these concepts. The potential impacts of these innovative LWR fuels on the front-end of the fuel cycle, on the reactor operation and on the back-end of the fuel cycle are succinctly described without having the pretension of being exhaustive. Since the design of these various concepts is still a work in progress, this analysis can only be preliminary and could be updated as the designs converge on their respective final version.

  1. A preliminary design for a satellite power system

    NASA Technical Reports Server (NTRS)

    Enriquez, Clara V.; Kokaly, Ray; Nandi, Saumya; Timmons, Mike; Garrard, Mark; Mercado, Rommel; Rogers, Brian; Ugaz, Victor

    1991-01-01

    Outlined here is a preliminary design for a Solar Power Satellite (SPS) system. The SPS will provide a clean, reliable source of energy for mass consumption. The system will use satellites in geostationary orbits around the Earth to capture the sun's energy. The intercepted sunlight will be converted to laser beam energy which can be transmitted to the Earth's surface. Ground systems on the Earth will convert the transmissions from space into electric power. The preliminary design for the SPS consists of one satellite in orbit around the Earth transmitting to one ground station. The SPs technology uses multi-layer solar cell technology arranged on a 20 sq km planar array to intercept sunlight and convert it to an electric voltage. Power conditioning devices then send the electricity to a laser, which transmits the power to the surface of the Earth. A ground station will convert the beam into electricity. Construction will take place in low Earth orbit and array sections, 20 in total, will be sailed on the solar wind out to the GEO location in 150 days. These individual transportation sections are referred to as solar sailing panels (SSAPs). The primary truss elements used to support the arrays are composed on composite tubular members in a pentahedral arrangement. Smart segments consisting of passive and active damping devices will increase the control of dynamic SPS modes.

  2. A preliminary design for a satellite power system

    SciTech Connect

    Enriquez, C.V.; Kokaly, R.; Nandi, S.; Timmons, M.; Garrard, M.; Mercado, R.; Rogers, B.; Ugaz, V.

    1991-05-01

    Outlined here is a preliminary design for a Solar Power Satellite (SPS) system. The SPS will provide a clean, reliable source of energy for mass consumption. The system will use satellites in geostationary orbits around the Earth to capture the sun's energy. The intercepted sunlight will be converted to laser beam energy which can be transmitted to the Earth's surface. Ground systems on the Earth will convert the transmissions from space into electric power. The preliminary design for the SPS consists of one satellite in orbit around the Earth transmitting to one ground station. The SPS technology uses multi-layer solar cell technology arranged on a 20 sq km planar array to intercept sunlight and convert it to an electric voltage. Power conditioning devices then send the electricity to a laser, which transmits the power to the surface of the Earth. A ground station will convert the beam into electricity. Construction will take place in low Earth orbit and array sections, 20 in total, will be sailed on the solar wind out to the GEO location in 150 days. These individual transportation sections are referred to as solar sailing panels (SSAPs). The primary truss elements used to support the arrays are composed on composite tubular members in a pentahedral arrangement. Smart segments consisting of passive and active damping devices will increase the control of dynamic SPS modes.

  3. Solar System science with the Large Synoptic Survey Telescope

    NASA Astrophysics Data System (ADS)

    Jones, Lynne; Brown, Mike; Ivezić, Zeljko; Jurić, Mario; Malhotra, Renu; Trilling, David

    2015-11-01

    The Large Synoptic Survey Telescope (LSST; http://lsst.org) will be a large-aperture, wide-field, ground-based telescope that will survey half the sky every few nights in six optical bands from 320 to 1050 nm. It will explore a wide range of astrophysical questions, ranging from performing a census of the Solar System, to examining the nature of dark energy. It is currently in construction, slated for first light in 2019 and full operations by 2022.The LSST will survey over 20,000 square degrees with a rapid observational cadence, to typical limiting magnitudes of r~24.5 in each visit (9.6 square degree field of view). Automated software will link the individual detections into orbits; these orbits, as well as precisely calibrated astrometry (~50mas) and photometry (~0.01-0.02 mag) in multiple bandpasses will be available as LSST data products. The resulting data set will have tremendous potential for planetary astronomy; multi-color catalogs of hundreds of thousands of NEOs and Jupiter Trojans, millions of asteroids, tens of thousands of TNOs, as well as thousands of other objects such as comets and irregular satellites of the major planets.LSST catalogs will increase the sample size of objects with well-known orbits 10-100 times for small body populations throughout the Solar System, enabling a major increase in the completeness level of the inventory of most dynamical classes of small bodies and generating new insights into planetary formation and evolution. Precision multi-color photometry will allow determination of lightcurves and colors, as well as spin state and shape modeling through sparse lightcurve inversion. LSST is currently investigating survey strategies to optimize science return across a broad range of goals. To aid in this investigation, we are making a series of realistic simulated survey pointing histories available together with a Python software package to model and evaluate survey detections for a user-defined input population. Preliminary

  4. Whole-building systems integration laboratory survey

    SciTech Connect

    Crawley, D.B. . Research and Management Foundation)

    1989-09-01

    This report was prepared for the Pacific Northwest Laboratory as a subcontracted activity by the Research Management Foundation of the American Consulting Engineers Council. The objective of the survey reported herein was to independently assess the need for a Building System Integration Laboratory from the viewpoint of academicians in the field of building science. The subcontractor-developed questionnaire was sent to 200 professors of architecture and engineering at US universities. In view of this diverse population, the 10% rate of return on the questionnaire was considered acceptable. Although the responses probably do not reflect an unbiased summary of the collective perceptions of the original population surveyed, they do provide a valid insight into the interests and concerns of the academic community with respect to building sciences issues.

  5. Solar Stirling power generation - Systems analysis and preliminary tests

    NASA Technical Reports Server (NTRS)

    Selcuk, M. K.; Wu, Y.-C.; Moynihan, P. I.; Day, F. D., III

    1977-01-01

    The feasibility of an electric power generation system utilizing a sun-tracking parabolic concentrator and a Stirling engine/linear alternator is being evaluated. Performance predictions and cost analysis of a proposed large distributed system are discussed. Design details and preliminary test results are presented for a 9.5 ft diameter parabolic dish at the Jet Propulsion Laboratory (Caltech) Table Mountain Test Facility. Low temperature calorimetric measurements were conducted to evaluate the concentrator performance, and a helium flow system is being used to test the solar receiver at anticipated working fluid temperatures (up to 650 or 1200 C) to evaluate the receiver thermal performance. The receiver body is designed to adapt to a free-piston Stirling engine which powers a linear alternator assembly for direct electric power generation. During the next phase of the program, experiments with an engine and receiver integrated into the concentrator assembly are planned.

  6. Description and Preliminary Testing of the CDSN Seismic Sensor Systems

    USGS Publications Warehouse

    Peterson, Jon; Tilgner, Edwin E.

    1985-01-01

    INTRODUCTION The China Digital Seismograph Network (CDSN) is being designed and installed to provide the People's Republic of China with the facilities needed to create a national digital database for earthquake research. The CDSN, which is being developed jointly by the PRC State Seismological Bureau and the U.S. Geological Survey, will consist initially of nine digitally-recording seismograph stations, a data management system to be used for compiling network-day tapes, and a depot maintenance center. Data produced by the network will be shared with research scientists throughout the world. A national seismograph network must be designed to support a variety of research objectives. From this standpoint, the choices and tradeoffs involved in specifying signal bandwidth, resolution, and dynamic range are the most important decisions in system design. As in the case of the CDSN, these decisions are made during the selection and design of the seismic sensor system and encoder components. The purpose of this report is to describe the CDSN sensor systems, their important signal characteristics, and the results of preliminary tests that have been performed on the instruments. Four overlapping data bands will be recorded at each station: short period (SP), broadband (BB), long period (LP), and very long period (VLP). Amplitude response curves are illustrated in Figure I. Vertical and horizontal components will be recorded for each data band. The SP and LP channels will be recorded with sufficient sensitivities to resolve earth background noise at seismically quiet sites. The BB channels will have a lower sensitivity and are intended for broadband recording of moderate-to-large body-wave signals and for increasing the effective amplitude range in the short- and long-period bands. The VLP channel does not provide additional spectral coverage at long periods; its purpose is to make use of on-site filtration and decimation to reduce post processing requirements for VLP

  7. The US motor systems market assessment: Overview and preliminary findings

    SciTech Connect

    Rosenberg, M.

    1997-07-01

    This paper summarizes the current status of the US Motor Systems Market Assessment. This component of the US Department of Energy's Motor Challenge program will provide a detailed portrait of the inventory of motor systems currently in use in US industrial facilities and a baseline characterization current practice in regard to motor system component selection, system design, maintenance, and management. This equipment and behavioral baseline will be used to target Motor Challenge program activities and to evaluate the program's impact on the motor systems markets. This paper presents an overview and selected findings from the project's principal research activities: a review of secondary sources on motor systems markets and inventory; compilation and reanalysis of existing primary information on the motor systems inventory; and an on-site survey of 300 industrial facilities.

  8. 49 CFR 192.723 - Distribution systems: Leakage surveys.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Distribution systems: Leakage surveys. 192.723... Distribution systems: Leakage surveys. (a) Each operator of a distribution system shall conduct periodic leakage surveys in accordance with this section. (b) The type and scope of the leakage control...

  9. 49 CFR 192.723 - Distribution systems: Leakage surveys.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Distribution systems: Leakage surveys. 192.723... Distribution systems: Leakage surveys. (a) Each operator of a distribution system shall conduct periodic leakage surveys in accordance with this section. (b) The type and scope of the leakage control...

  10. 49 CFR 192.723 - Distribution systems: Leakage surveys.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Distribution systems: Leakage surveys. 192.723... Distribution systems: Leakage surveys. (a) Each operator of a distribution system shall conduct periodic leakage surveys in accordance with this section. (b) The type and scope of the leakage control...

  11. 49 CFR 192.723 - Distribution systems: Leakage surveys.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Distribution systems: Leakage surveys. 192.723... Distribution systems: Leakage surveys. (a) Each operator of a distribution system shall conduct periodic leakage surveys in accordance with this section. (b) The type and scope of the leakage control...

  12. Aerodynamic preliminary analysis system 2. Part 2: User's manual

    NASA Technical Reports Server (NTRS)

    Sova, G.; Divan, P.; Spacht, L.

    1991-01-01

    An aerodynamic analysis system based on potential theory at subsonic and/or supersonic speeds and impact type finite element solutions at hypersonic conditions is described. Three dimensional configurations have multiple nonplanar surfaces of arbitrary planforms and bodies of noncircular contour may be analyzed. Static, rotary, and control longitudinal and lateral-directional characteristics may be generated. The analysis was implemented on a time sharing system in conjunction with an input tablet digitizer and an interactive graphics input/output display and editing terminal to maximize its responsiveness to the preliminary analysis. Computation times on an IBM 3081 are typically less than one minute of CPU/Mach number at subsonic, supersonic, or hypersonic speeds. This is a user manual for the computer programming.

  13. Line Focus Receiver Infrared Temperature Survey System

    Energy Science and Technology Software Center (ESTSC)

    2010-06-01

    For ongoing maintenance and performance purposes, solar parabolic trough field operators desire to know that the Heat Collection Elements (HCEs) are performing properly. Measuring their temperature is one way of doing this One 30MW field can contain approximately 10,000 HCE's. This software interfaces with a GPS receiver and an infrared camera. It takes global positioning data from the GPS and uses this information to automate the infrared image capture and temperature analysis of individual solarmore » parabolic HCEs in a solar parabolic trough field With this software system an entire 30MW field can be surveyed in 2-3 days.« less

  14. Line Focus Receiver Infrared Temperature Survey System

    SciTech Connect

    Wendelin, Tim

    2010-06-01

    For ongoing maintenance and performance purposes, solar parabolic trough field operators desire to know that the Heat Collection Elements (HCEs) are performing properly. Measuring their temperature is one way of doing this One 30MW field can contain approximately 10,000 HCE's. This software interfaces with a GPS receiver and an infrared camera. It takes global positioning data from the GPS and uses this information to automate the infrared image capture and temperature analysis of individual solar parabolic HCEs in a solar parabolic trough field With this software system an entire 30MW field can be surveyed in 2-3 days.

  15. Survey of harmonics measurements in electrical distribution systems

    SciTech Connect

    Tolbert, L.M.; Hollis, H.D.; Hale, P.S. Jr.

    1996-09-01

    An assessment of the harmonics found in the electrical distribution system of several buildings in the three Department of Energy (DOE) Oak Ridge plants in Tennessee has yielded several conclusions useful in the design of electrical distribution systems. A preliminary survey to determine where significant amounts of harmonic currents of voltages existed in the distribution system was performed at several buildings by comparing readings taken with true root-mean-square (RMS) multimeters and averaging multimeters (non-true RMS meters). From these measurements and subsequent calculations, facilities that appeared to have significant levels of harmonics present were analyzed with a power analyzer that could record waveforms and give the spectrum and magnitude of harmonics. Among the non-linear loads for which sample waveforms are illustrated are fluorescent lighting (both magnetic and electronic ballasts), variable frequency drives, switch mode power supplies, and uninterruptible power supplies. A discussion as to how various harmonic waveforms come about as a result of these nonlinear loads is also outlined in this paper.

  16. WATER QUALITY AND BIOLOGICAL EFFECTS OF URBAN RUNOFF ON COYOTE CREEK. PHASE I - PRELIMINARY SURVEY

    EPA Science Inventory

    This preliminary report describes the characteristics of urban runoff affecting Coyote Creek, sources of urban runoff pollutants, effects of urban runoff and potential controls for urban runoff. Local urban runoff characterization information is summarized, and sources of urban r...

  17. Tsunami survey expedition: preliminary investigation of Maldivian coral reefs two weeks after the event.

    PubMed

    Goffredo, Stefano; Piccinetti, Corrado; Zaccanti, Francesco

    2007-08-01

    On December 26th 2004, a earthquake west of Sumatra generated a devastating tsunami. Hundreds of thousands of people fell victim. Economic losses were greatest in those countries dependant on tourism. The impact in the Maldives on persons and things was modest. Immediately following the event and notwithstanding the lack of scientific data, the mass media gave catastrophic reports on the state of coral reefs in the area. This paper reports on the first survey on coral reefs in the Maldives after the Tsunami. Ocean walls, passes, inner reefs, and shoals in the North and South Malé atolls, were surveyed two weeks after the event. Significant damage was recorded in the passes in the South Malé atoll. Our observations showed that the damage was more or less extensive depending on latitude and topography. Sri Lanka may have broken the wave's rush, reducing the extent of the impact on northern atolls. The water's acceleration inside the passes was so intense as to cause reef collapses. The observed damage represents a minimum fraction of the entire coral reef system. Tourist perception of the area seems unchanged. These data may be used to disseminate correct information about the state of Maldives coral reefs, which would be useful in relaunching local economy. PMID:17180420

  18. Preliminary design studies on a nuclear seawater desalination system

    SciTech Connect

    Wibisono, A. F.; Jung, Y. H.; Choi, J.; Kim, H. S.; Lee, J. I.; Jeong, Y. H.; No, H. C.

    2012-07-01

    Seawater desalination is one of the most promising technologies to provide fresh water especially in the arid region. The most used technology in seawater desalination are thermal desalination (MSF and MED) and membrane desalination (RO). Some developments have been done in the area of coupling the desalination plant with a nuclear reactor to reduce the cost of energy required in thermal desalination. The coupling a nuclear reactor to a desalination plant can be done either by using the co-generation or by using dedicated heat from a nuclear system. The comparison of the co-generation nuclear reactor with desalination plant, dedicated nuclear heat system, and fossil fueled system will be discussed in this paper using economical assessment with IAEA DEEP software. A newly designed nuclear system dedicated for the seawater desalination will also be suggested by KAIST (Korea Advanced Inst. of Science and Technology) research team and described in detail within this paper. The suggested reactor system is using gas cooled type reactor and in this preliminary study the scope of design will be limited to comparison of two cases in different operating temperature ranges. (authors)

  19. Aerodynamic preliminary analysis system. Part 1: Theory. [linearized potential theory

    NASA Technical Reports Server (NTRS)

    Bonner, E.; Clever, W.; Dunn, K.

    1978-01-01

    A comprehensive aerodynamic analysis program based on linearized potential theory is described. The solution treats thickness and attitude problems at subsonic and supersonic speeds. Three dimensional configurations with or without jet flaps having multiple non-planar surfaces of arbitrary planform and open or closed slender bodies of non-circular contour may be analyzed. Longitudinal and lateral-directional static and rotary derivative solutions may be generated. The analysis was implemented on a time sharing system in conjunction with an input tablet digitizer and an interactive graphics input/output display and editing terminal to maximize its responsiveness to the preliminary analysis problem. Nominal case computation time of 45 CPU seconds on the CDC 175 for a 200 panel simulation indicates the program provides an efficient analysis for systematically performing various aerodynamic configuration tradeoff and evaluation studies.

  20. Preliminary geoid mapping results by Fugro's improved Micro-g LaCoste turnkey airborne gravity system

    NASA Astrophysics Data System (ADS)

    Zhong, D.; Kingdon, R. W.

    2015-07-01

    In this paper, we introduce the Micro-g LaCoste Turnkey Airborne Gravity System (TAGS) with Fugro's improved gravity processing and geoid modeling software package for regional gravity field mapping and geoid determination. Three test areas with different topographic characteristics under the Gravity for the Redefinition of the AmericanVertical Datum (GRAV-D) project of theUSNOAA National Geodetic Surveys (NGS) were used for case studies and determine the available accuracy of the system. The preliminary results of all these test cases show that the system with Fugro's improved gravity and geoid processing software package is able to achieve a comparable geoid mapping result to traditional terrestrial methods.

  1. Results of the preliminary radiological survey at B and T Metals, 425 West Town Street, Columbus, Ohio (CO001)

    SciTech Connect

    Cottrell, W.D.; Quillen, J.L.; Crutcher, J.W.

    1990-10-01

    As part of the Formerly Utilized Sites Remedial Action Program (FUSRAP), the US Department of Energy (DOE) is implementing a radiological survey program to determine the radiological conditions at sites that were formerly used by the department's predecessor agencies. The preliminary radiological survey discussed in this report for the B T Metals site in Columbus, Ohio, is part of the FUSRAP effort and was conducted at the request of DOE by members of the Measurement Applications and Development Group of Oak Ridge National Laboratory in 1988 and 1989. In the 1940s the B T Metals site was used to provide extrusion of uranium billets into rods in support of the Manhattan Engineer District (MED) operations. The preliminary radiological survey included a surface gamma scan, collection of dust, debris, and soil samples, measurement of direct and transferable alpha and beta-gamma activity, and air sampling. Results of this radiological assessment indicate that the property contains residual radioactivity from MED activities in concentrations that exceed remedial action guidelines. 8 refs., 8 figs., 6 tabs.

  2. 45 CFR 156.1125 - Enrollee satisfaction survey system.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 1 2014-10-01 2014-10-01 false Enrollee satisfaction survey system. 156.1125... RELATED TO EXCHANGES Quality Standards § 156.1125 Enrollee satisfaction survey system. (a) General requirement. A QHP issuer must contract with an HHS-approved enrollee satisfaction survey (ESS) vendor,...

  3. 45 CFR 155.1405 - Enrollee satisfaction survey system.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 1 2014-10-01 2014-10-01 false Enrollee satisfaction survey system. 155.1405... Quality Reporting Standards for Exchanges § 155.1405 Enrollee satisfaction survey system. The Exchange must prominently display results from the Enrollee Satisfaction Survey for each QHP on its Web site,...

  4. Archaeology in the Kilauea East Rift Zone: Part 2, A preliminary sample survey, Kapoho, Kamaili and Kilauea geothermal subzones, Puna District, Hawaii island

    SciTech Connect

    Sweeney, M.T.K.; Burtchard, G.C.

    1995-05-01

    This report describes a preliminary sample inventory and offers an initial evaluation of settlement and land-use patterns for the Geothermal Resources Subzones (GRS) area, located in Puna District on the island of Hawaii. The report is the second of a two part project dealing with archaeology of the Puna GRS area -- or more generally, the Kilauea East Rift Zone. In the first phase of the project, a long-term land-use model and inventory research design was developed for the GRS area and Puna District generally. That report is available under separate cover as Archaeology in the Kilauea East Rift Zone, Part I: Land-Use Model and Research Design. The present report gives results of a limited cultural resource survey built on research design recommendations. It offers a preliminary evaluation of modeled land-use expectations and offers recommendations for continuing research into Puna`s rich cultural heritage. The present survey was conducted under the auspices of the United States Department of Energy, and subcontracted to International Archaeological Research Institute, Inc. (IARII) by Martin Marietta Energy Systems, Inc. The purpose of the archaeological work is to contribute toward the preparation of an environmental impact statement by identifying cultural materials which could be impacted through completion of the proposed Hawaii Geothermal Project.

  5. Systems for Paediatric Sepsis: A Global Survey

    PubMed Central

    Kang, KT; Chandler, HK; Espinosa, V; Kissoon, N

    2014-01-01

    ABSTRACT Objectives: To evaluate the resources available for early diagnosis and treatment of paediatric sepsis at hospitals in developing and developed countries. Methods: This was a voluntary online survey involving 101 hospitals from 41 countries solicited through the World Federation of Pediatric Intensive and Critical Care Societies contact list and website. The survey was designed to assess the spectrum of sepsis epidemiology, patterns of applied therapies, availability of resources and barriers to optimal sepsis treatment. Results: Ninety per cent of respondents represented a tertiary or general hospital with paediatric intensive care facilities, including 63% from developed countries. Adequate triage services were absent in more than 20% of centres. Insufficiently trained personnel and lack of a sepsis protocol was reported in 40% of all sites. While there were specific guidelines for sepsis management in 78% of centres (n = 100), protocols for assessing sepsis patients were not applied in nearly 70% of centres. Lack of parental recognition of sepsis and failure of referring centres to diagnose sepsis were identified as major barriers by more than 50% of respondents. Conclusions: Even among centres with no significant resource constraints and advanced medical systems, significant deficits in sepsis care exist. Early recognition and management remains a key issue and may be addressed through improved triage, augmented support for referring centres and public awareness. Focussed research is necessary at the institutional level to identify and address specific barriers. PMID:25867557

  6. A Preliminary Survey of Benthos from the Nephrops norvegicusMud Grounds in the North-western Irish Sea

    NASA Astrophysics Data System (ADS)

    Hensley, R. T.

    1996-04-01

    A preliminary survey of benthic infauna from an extensive basin of soft mud in the Irish Sea was carried out in 1992. A total of 110 taxa were recorded of which polychaete worms (Phylum Annelida) constituted 77·8% of all taxa recorded. Hierarchical classification and detrended correspondence analysis divided the area studied into five regions which could be correlated to the differences in superficial sediments and depth across the basin. Although much of the fauna was ubiquitous, a change in trophic structure was observed, with tubiculous polychaetes becoming progressively less common in deeper softer sediment areas where surface and non-selective deposit-feeding taxa predominated.

  7. Preliminary on-orbit results of trigger system for DAMPE

    NASA Astrophysics Data System (ADS)

    Zhang, Yongqiang; Chang, Jin; Guo, Jian hua; Dong, TieKuang; Liu, Yang

    2016-07-01

    The Dark Matter Particle Explorer (DAMPE), Chinese first high energy cosmic ray explorer in space, has been successfully launched at Jiuquan Satellite Launch Center, with the mission of searching dark matter particle. Large energy range for electron/gamma, good energy resolution, and excellent PID ability, make DAMPE to be the most promising detector so far to find the signal of dark matter. DAMPE consists of four sub-detectors: Plastic Scintillation detector, Silicon-Tungsten tracker, BGO calorimeter and Neutron detector. The hit signals generated by the BGO calorimeter and the trigger board (in DAQ) constitute the trigger system of DAMPE, which will generate trigger signals for the four sub-detectors to start data acquisition. The trigger system reduces the trigger rates on orbit from about 1kHz to 70~100Hz, that releases the stress of DAQ transmitting data to ground. In this paper, we will introduce the trigger system of DAMPE, and present some preliminary on-orbit results e.g. trigger efficiency, together with the beam test results at CERN and the simulation results as comparison.

  8. Preliminary tests of an advanced high-temperature combustion system

    NASA Technical Reports Server (NTRS)

    Wear, J. D.; Trout, A. M.; Smith, J. M.; Jacobs, R. E.

    1983-01-01

    A combustion system has been developed to operate efficiently and with good durability at inlet pressures to 4.05 MPa (40 atm), inlet air temperatures to 900 K, and exhaust gas temperatures to 2480 K. A preliminary investigation of this system was conducted at inlet pressures to 0.94 MPa (9 atm), a nominal inlet air temperature of 560 K, and exhaust gas temperatures to 2135 K. A maximum combustion efficiency of 98.5 percent was attained at a fuel-air ratio of 0.033; the combustion efficiency decreased to about 90 percent as the fuel-air ratio was increased to 0.058. An average liner metal temperature of 915 K, 355 kelvins greater than the nominal inlet air temperature, was reached with an average exhaust gas temperature of 2090 K. The maximum local metal temperature at this condition was about 565 kelvins above the nominal inlet air temperature and decreased to 505 kelvins above with increasing combustor pressure. Tests to determine the isothermal total pressure loss of the combustor showed a liner loss of 1.1 percent and a system loss of 6.5 percent.

  9. Preliminary grid data and maps for an aeromagnetic survey of the Taylor mountains quadrangle and a portion of the Bethel quadrangle, Alaska

    USGS Publications Warehouse

    Saltus, R.W.; Milicevic, B.

    2004-01-01

    A preliminary data grid and maps are presented for an aeromagnetic survey of the Taylor Mountains and a portion of the Bethel quadrangles, Alaska. The aeromagnetic survey was flown by McPhar Geosurveys Ltd. for the U.S. Geological Survey (USGS). A flight-line spacing of 1,600 meters (1 mile) and nominal flight height of 305 meters (1,000 feet) above topography (draped) was used for the survey. The preliminary data grid has a grid cell size of 350 meters (1150 feet). Final data processing and quality control have not been applied to these data. The purpose of this preliminary data release is to allow prompt public access to these data, which are of interest for active mineral exploration in the region. A more complete data release and description will be published later once the final data processing is complete.

  10. Devising a Visual Inspection System for Canal Tunnels: Preliminary Studies

    NASA Astrophysics Data System (ADS)

    Albert, J.-L.; Charbonnier, P.; Chavant, P.; Foucher, P.; Muzet, V.; Prybyla, D.; Perrin, T.; Grussenmeyer, P.; Guillemin, S.; Koehl, M.

    2013-07-01

    In France, most tunnel canals were built during the 19th and 20th centuries. Maintaining them is not only a matter of heritage preservation but also a question of security. Inspecting tunnel canals is difficult and time consuming, which motivates the development of an image-based surveying system, as already exists for railway or road tunnels. However, while the imaging configuration is similar, referencing the data acquisition device is more difficult in the case of underground waterways, due to the drifts of the inspection barge. In this paper, we introduce the recording prototype we have designed and report the results of the test that were performed in an underground waterway, Niderviller's tunnel, to assess the feasibility of the system. In particular, we give details on the imaging system design. We also analyze the pros and cons of each location method, in terms of costs, practicability, computational burden and accuracy.

  11. Spacewatch Survey of the Solar System

    NASA Technical Reports Server (NTRS)

    McMillan, Robert S.

    2000-01-01

    The purpose of the Spacewatch project is to explore the various populations of small objects throughout the solar system. Statistics on all classes of small bodies are needed to infer their physical and dynamical evolution. More Earth Approachers need to be found to assess the impact hazard. (We have adopted the term "Earth Approacher", EA, to include all those asteroids, nuclei of extinct short period comets, and short period comets that can approach close to Earth. The adjective "near" carries potential confusion, as we have found in communicating with the media, that the objects are always near Earth, following it like a cloud.) Persistent and voluminous accumulation of astrometry of incidentally observed main belt asteroids MBAs will eventually permit the Minor Planet Center (MPQ to determine the orbits of large numbers (tens of thousands) of asteroids. Such a large body of information will ultimately allow better resolution of orbit classes and the determinations of luminosity functions of the various classes, Comet and asteroid recoveries are essential services to planetary astronomy. Statistics of objects in the outer solar system (Centaurs, scattered-disk objects, and Trans-Neptunian Objects; TNOs) ultimately will tell part of the story of solar system evolution. Spacewatch led the development of sky surveying by electronic means and has acted as a responsible interface to the media and general public on this discipline and on the issue of the hazard from impacts by asteroids and comets.

  12. A preliminary survey of selected structures on the Hanford Site for Townsend`s big-eared bat (Plecotus townsendii)

    SciTech Connect

    Becker, J.M.

    1993-10-01

    A preliminary survey of selected structures on the Hanford Site for Townsend`s big-wed bat (Plecotus townsendii) was conducted by Pacific Northwest Laboratory (PNL) in August and September 1993. The Westinghouse Hanford Company (WHC) commissioned PNL to evaluate the potential for this bat, a candidate for federal protection, to occur in buildings potentially affected by decontamination and decommissioning operations under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). The project involved identifying structures that contained bats and determining whether Townsend`s big-eared bats were among those present. The survey focused on deactivated reactors, other buildings in the 100D and 100K Areas, canyon buildings in the 200 Areas, and other structures reported to contain bats. During this six-week survey, Townsend`s big-wed bat was not located. However, some structures likely to contain bat colonies were unable to be surveyed and others were only partially surveyed. These require further investigation over a longer period of time before a final determination on this species can be made. Of the buildings surveyed, the reactors and their associated buildings provided roosting sites most used by bats. No bats were found in canyon buildings in the 200 areas. These buildings are occupied, well-lighted, and offer few entrances for bats. They are also probably too distant from the Columbia River Shoreline, which constitutes the most important bat foraging habitat. We recommend that the remaining reactors and buildings, with emphasis on subterranean tunnels and basements, be surveyed during a more extended time period, i.e., June through September 1994.

  13. Space Station long term lubrication analysis. Phase 1 preliminary tribological survey

    NASA Technical Reports Server (NTRS)

    Dufrane, K. F.; Kannel, J. W.; Lowry, J. A.; Montgomery, E. E.

    1990-01-01

    Increases in the size, complexity, and life requirements of satellites and space vehicles have put increasing demands on the lubrication requirements for trouble-free service. Since the development costs of large systems are high, long lives with minimum maintenance are dictated. The Space Station represents the latest level of size and complexity in satellite development; it will be nearly 100 meters in major dimensions and will have a life requirement of thirty years. It will have numerous mechanisms critical to its success, some of which will be exposed to the space environment. Designing long-life lubrication systems and choosing appropriate lubricants for these systems will be necessary for their meeting the requirements and for avoiding failures with associated dependent mechanisms. The purpose of this program was to identify the various critical mechanisms and review their designs during the overall design and development stage so that problem areas could be avoided or minimized prior to the fabrication of hardware. The specific objectives were fourfold: (1) to perform a tribology survey of the Space Station for the purpose of documenting each wear point as to materials involved, environmental conditions, and operating characteristics; (2) to review each wear point (point of relative motion) as to the lubrication used and substrate materials selected in the context of its operating characteristics and the environmental conditions imposed; (3) to make recommendations for improvement in areas where the lubricant chosen and/or where the substrate (materials of the wear couple) are not considered optimum for the application; and (4) to make or recommend simulated or full scale tests in tribological areas where the state-of-the-art is being advanced, in areas where new designs are obviously being employed and a critical review would indicate that problems are a strong possibility, and/or where excessive wear, a malfunction, or excessive leakage would create fluid

  14. Preliminary business plan: Plzen district heating system upgrade

    SciTech Connect

    1996-06-01

    The district heating system of the City of Plzen, Czech Republic, needs to have physical upgrades to replace aging equipment and to comply with upcoming environmental regulations. Also, its ownership and management are being changed as a result of privatization. As majority owner, the City has the primary goal of ensuring that the heating needs of its customers are met as reliably and cost-effectively as possible. This preliminary business plan is part of the detailed analysis (5 reports in all) done to assist the City in deciding the issues. Preparation included investigation of ownership, management, and technology alternatives; estimation of market value of assets and investment requirements; and forecasting of future cash flow. The district heating system consists of the Central Plzen cogeneration plant, two interconnected heating plants [one supplying both hot water and steam], three satellite heating plants, and cooperative agreements with three industrial facilities generating steam and hot water. Most of the plants are coal-fired, with some peaking units fired by fuel oil.

  15. Preliminary study of a dispersed fringe type sensing system

    NASA Astrophysics Data System (ADS)

    Zhang, Yong; Liu, Gen-Rong; Wang, Yue-Fei; Li, Ye-Ping; Zhang, Ya-Jun; Zhang, Liang

    2009-08-01

    Telescopes with large aspherical primary mirrors collect more light and are therefore sought after by astronomers. Instead of using a single large one-piece mirror, smaller segments can be assembled into a useable telescopic primary. Because the segments must fit together to create the effect of a single mirror, segmented optics present unique challenges to the fabrication and testing that are absent in monolithic optics. A dispersed fringe sensor (DFS) using a broadband point source is an efficient method for cophasing and is also highly automated and robust. Unlike the widely adopted Shack-Hartmann Wavefront sensor and curvature wavefront sensor with edge sensors for calibration of relative pistons, DFS can estimate the piston between segments by only using the spectrum formed by the transmissive grating's dispersion, and therefore can replace the edge sensors, which are difficult to calibrate. We introduce the theory of the DFS and Dispersed Hartmann Sensor (DHS) for further utilization of the coarse phasing method of DFS. According to the theory, we bring out the preliminary system design of the cophasing experimental system based on DFS and DHS which is now established in our institute. Finally, a summary is reached.

  16. System Synthesis in Preliminary Aircraft Design using Statistical Methods

    NASA Technical Reports Server (NTRS)

    DeLaurentis, Daniel; Mavris, Dimitri N.; Schrage, Daniel P.

    1996-01-01

    This paper documents an approach to conceptual and preliminary aircraft design in which system synthesis is achieved using statistical methods, specifically design of experiments (DOE) and response surface methodology (RSM). These methods are employed in order to more efficiently search the design space for optimum configurations. In particular, a methodology incorporating three uses of these techniques is presented. First, response surface equations are formed which represent aerodynamic analyses, in the form of regression polynomials, which are more sophisticated than generally available in early design stages. Next, a regression equation for an overall evaluation criterion is constructed for the purpose of constrained optimization at the system level. This optimization, though achieved in a innovative way, is still traditional in that it is a point design solution. The methodology put forward here remedies this by introducing uncertainty into the problem, resulting a solutions which are probabilistic in nature. DOE/RSM is used for the third time in this setting. The process is demonstrated through a detailed aero-propulsion optimization of a high speed civil transport. Fundamental goals of the methodology, then, are to introduce higher fidelity disciplinary analyses to the conceptual aircraft synthesis and provide a roadmap for transitioning from point solutions to probabalistic designs (and eventually robust ones).

  17. Preliminary systems engineering evaluations for the National Ecological Observatory Network.

    SciTech Connect

    Robertson, Perry J.; Kottenstette, Richard Joseph; Crouch, Shannon M.; Brocato, Robert Wesley; Zak, Bernard Daniel; Osborn, Thor D.; Ivey, Mark D.; Gass, Karl Leslie; Heller, Edwin J.; Dishman, James Larry; Schubert, William Kent; Zirzow, Jeffrey A.

    2008-11-01

    The National Ecological Observatory Network (NEON) is an ambitious National Science Foundation sponsored project intended to accumulate and disseminate ecologically informative sensor data from sites among 20 distinct biomes found within the United States and Puerto Rico over a period of at least 30 years. These data are expected to provide valuable insights into the ecological impacts of climate change, land-use change, and invasive species in these various biomes, and thereby provide a scientific foundation for the decisions of future national, regional, and local policy makers. NEON's objectives are of substantial national and international importance, yet they must be achieved with limited resources. Sandia National Laboratories was therefore contracted to examine four areas of significant systems engineering concern; specifically, alternatives to commercial electrical utility power for remote operations, approaches to data acquisition and local data handling, protocols for secure long-distance data transmission, and processes and procedures for the introduction of new instruments and continuous improvement of the sensor network. The results of these preliminary systems engineering evaluations are presented, with a series of recommendations intended to optimize the efficiency and probability of long-term success for the NEON enterprise.

  18. System Synthesis in Preliminary Aircraft Design Using Statistical Methods

    NASA Technical Reports Server (NTRS)

    DeLaurentis, Daniel; Mavris, Dimitri N.; Schrage, Daniel P.

    1996-01-01

    This paper documents an approach to conceptual and early preliminary aircraft design in which system synthesis is achieved using statistical methods, specifically Design of Experiments (DOE) and Response Surface Methodology (RSM). These methods are employed in order to more efficiently search the design space for optimum configurations. In particular, a methodology incorporating three uses of these techniques is presented. First, response surface equations are formed which represent aerodynamic analyses, in the form of regression polynomials, which are more sophisticated than generally available in early design stages. Next, a regression equation for an Overall Evaluation Criterion is constructed for the purpose of constrained optimization at the system level. This optimization, though achieved in an innovative way, is still traditional in that it is a point design solution. The methodology put forward here remedies this by introducing uncertainty into the problem, resulting in solutions which are probabilistic in nature. DOE/RSM is used for the third time in this setting. The process is demonstrated through a detailed aero-propulsion optimization of a High Speed Civil Transport. Fundamental goals of the methodology, then, are to introduce higher fidelity disciplinary analyses to the conceptual aircraft synthesis and provide a roadmap for transitioning from point solutions to probabilistic designs (and eventually robust ones).

  19. SURVEY OF MATERIALS IN THE NEGLECTED LANGUAGES, PART I (PRELIMINARY EDITION).

    ERIC Educational Resources Information Center

    Center for Applied Linguistics, Washington, DC.

    THIS PRELIMINARY LIST OF STUDY AIDS FOR NEGLECTED LANGUAGES (THOSE NOT COMMONLY TAUGHT IN THE UNITED STATES) GIVES GREATEST EMPHASIS TO MATERIALS INTENDED FOR USE BY THE ADULT LEARNER WHOSE NATIVE LANGUAGE IS ENGLISH. ITS ENTRIES ARE ARRANGED ALPHABETICALLY BY LANGUAGE, ACHINESE TO ZULU, AND INCLUDE TEXTS, GRAMMARS, READERS, DICTIONARIES, STUDIES…

  20. Survey of remote data monitoring systems

    SciTech Connect

    Logee, T.L.; Kendall, P.W.; Pollock, E.O.; Raymond, M.G.; Knapp, R.C. Jr.

    1984-09-01

    A self-contained data-logger device called an SDAS (Site Data Acquisition Subsystem) was built for the National Solar Data Network (NSDN) which could collect analog data from 96 channels, store the data for up to three days, and then transmit the stored data on request to a central facility by voice-grade telephone lines. This system has worked fairly well for the eight years that it has been in service. However, the design and components are getting old and newer dataloggers may be more reliable and accurate and less expensive. This report discusses the results of an extensive search for an SDAS replacement. The survey covered 62 models from 36 manufacturers. These numbers are not indicative of all the dataloggers or manufacturers available, but only those which appeared to have some qualifications for the NSDN datalogger replacement. This report views the datalogger as a system which is made up of sensors, a data acquisition and storage unit, a telecommunications subsystem, and a data processing subsystem. Therefore, there is a section on sensors used in the NSDN, telecommunications technology, and data processing requirements. These four components or subsystems are all necessary in order to have an integrated, successful remote data monitoring network.

  1. Does Education Plus Action Lead to Leadership on Climate? Preliminary Results from the ACE Leadership Development Longitudinal Survey Project

    NASA Astrophysics Data System (ADS)

    Anderson, R. K.; Qusba, L.; Lappe, M.; Flora, J. A.

    2014-12-01

    Through education and leadership development, Alliance for Climate Education (ACE) is building a generation of confident and capable youth driving climate solutions now throughout their lives. In 2011-12, a random sample of 2,800 high school students across the country was surveyed before and after seeing the ACE Assembly on climate science and solutions. The survey showed that the ACE Assembly resulted in a 27% increase in climate science knowledge scores, with 59% of students increasing their intentions to take action on climate and a doubling of the number of students talking to parents and peers about climate change. Students were also compared to the Global Warming's Six Americas classification of Americans' views on climate. Following the ACE Assembly, 60% of students were alarmed or concerned about climate change. Building off these results, in 2014 ACE began to assess the results of its leadership development program that follows the ACE Assembly. The goal of this survey project is to measure ACE's long-term impact on students' college and career pathways, civic engagement and climate action. Preliminary results show that a majority of students in ACE's leadership development program are alarmed about global warming and are having conversations about global warming. A majority of these students also feel confident in their ability to lead a climate-related campaign in their school and community. These students will continue to be surveyed through 2015.

  2. Commuters and Parking at UNC-G. Preliminary Findings from the Commuting Student Survey.

    ERIC Educational Resources Information Center

    Reichard, Donald J.; McArver, Patricia P.

    Data gleaned from items relating to transportation and parking from the Commuting Student Survey are reported. The survey questionnaire was designed to provide an overview of several aspects of the commuting student's relationship with the university and was sent to a stratified random sample of 2,140 students who were enrolled for the spring 1975…

  3. The Development and Preliminary Validation of the Behavior, Environment, and Changeability Survey (BECS)

    ERIC Educational Resources Information Center

    Walsh, Jennifer R.; Hebert, Angel; Byrd-Bredbenner, Carol; Carey, Gale; Colby, Sarah; Brown-Esters, Onikia N.; Greene, Geoffrey; Hoerr, Sharon; Horacek, Tanya; Kattelmann, Kendra; Kidd, Tandalayo; Koenings, Mallory; Phillips, Beatrice; Shelnutt, Karla P.; White, Adrienne A.

    2012-01-01

    Objective: To develop and test the validity of the Behavior, Environment, and Changeability Survey (BECS) for identifying the importance and changeability of nutrition, exercise, and stress management behavior and related aspects of the environment. Design: A cross-sectional, online survey of the BECS and selected validated instruments. Setting:…

  4. Raising future forensic pathologists (second report): results of a preliminary interview survey.

    PubMed

    Murakami, Manabu; Matoba, Kotaro; Hayakawa, Akira; Terazawa, Koichi

    2012-08-01

    Fostering the specialists of forensic pathology has become a worldwide problem. In Japan, factors such as government budget cuts, the introduction of initial postgraduate clinical training system, as well as national policy on increasing autopsy rates, may deter young graduates from entering this specialty. The aim of this study was to look for clues to promote the training of young forensic pathologists. We selected and interviewed five forensic pathologists, with each interview lasting approximately 60 minutes, and picked up common views among them. The interviews topic, based on a prior survey, was: "What do you believe forensic pathologists require to promote the training of their successors." We selected common views on the three themes listed below; 1) standardization of minimum requirements to be independent forensic pathologists, 2) balancing forensic pathologists' time among autopsy practice, research, and education, and 3) preparing positions for younger forensic pathologists. These opinions were the same as those of previous studies conducted overseas and must be discussed at academic conferences in the future, where both junior and senior forensic pathologists participate. PMID:23016268

  5. Preliminary survey report: Steelcase, Incorporated, Grand Rapids, Michigan, September 23, 1981

    SciTech Connect

    Martinez, K.F.

    1982-02-02

    An on-site visit was made to Steelcase, Incorporated, Grand Rapids, Michigan for the purpose of observing the processes involving adhesives, emphasizing the method of application and methods of controlling exposures to workers. Initial investigations focused on the use of adhesives in the manufacture of partitioning panels, chairs, and desks. Each process involved the spraying of solvent-borne contact adhesives, both flammable and nonflammable. Solvent-vapor concentrations were adequately controlled through the use of ventilation booths. The spray guns were interlocked with the ventilation system. These booths were designed primarily to control the fire hazard present in using a flammable adhesive. There were some applications that are too large and must be carried on outside the booth. Personal protective equipment was not required for every worker but was available if requested. Most employees wore safety shoes and safety glasses. Gloves were worn by those working with adhesives. A preemployment physical was a requirement and periodic examinations were given to those workers who function in a hazardous environment. The author concludes that this company would be a strong candidate for an in-depth survey if the furniture industry is selected for a detailed study.

  6. Expert system verification and validation survey. Delivery 2: Survey results

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The purpose is to determine the state-of-the-practice in Verification and Validation (V and V) of Expert Systems (ESs) on current NASA and industry applications. This is the first task of the series which has the ultimate purpose of ensuring that adequate ES V and V tools and techniques are available for Space Station Knowledge Based Systems development. The strategy for determining the state-of-the-practice is to check how well each of the known ES V and V issues are being addressed and to what extent they have impacted the development of ESs.

  7. Survey of Current Systems for Selective Dissemination of Information. (SDI).

    ERIC Educational Resources Information Center

    Houseman, Edward M., Ed.

    Reproductions of 100 fact sheets received in response to a comprehensive survey of known and suspected Selective Dissemination of Information (SDI) systems are organized into operational, pilot and planned systems. The survey form was designed to give a detailed picture of system design features, organized so that the reader can rapidly locate…

  8. Preliminary results of a lidar-dial integrated system for the automatic detection of atmospheric pollutants

    NASA Astrophysics Data System (ADS)

    Gaudio, P.; Gelfusa, M.; Richetta, M.

    2012-11-01

    In the last decades, atmospheric pollution in urban and industrial areas has become a major concern of both developed and developing countries. In this context, surveying relative large areas in an automatic way is an increasing common objective of public health organisations. The Lidar-Dial techniques are widely recognized as a cost-effective approach to monitor large portions of the atmosphere and, for example, they have been successful applied to the early detection of forest fire. The studies and preliminary results reported in this paper concern the development of an integrated Lidar-Dial system able to detect sudden releases in air of harmful and polluting substances. The propose approach consists of continuous monitoring of the area under surveillance with a Lidar type measurement (by means of a low cost system). Once a significant increase in the density of a pollutant is revealed, the Dial technique is used to identify the released chemicals. In this paper, the specifications of the proposed station are discussed. The most stringent requirement is the need for a very compact system with a range of at least 600-700 m. Of course, the optical wavelengths must be in an absolute eye-safe range for humans. A conceptual design of the entire system is described and the most important characteristic of the main elements are provided. In particular the capability of the envisaged laser sources, Nd:YAG and CO2 lasers, to provide the necessary quality of the measurements is carefully assessed. Since the detection of dangerous substances must be performed in an automatic way, the monitoring station will be equipped with an adequate set of control and communication devices for independent autonomous operation. The results of the first preliminary tests illustrate the potential of the chosen approach.

  9. High resolution seismic reflection survey in the Gulf of Pozzuoli, Naples, Italy. An example of preliminary interpretation of seismic profiles.

    NASA Astrophysics Data System (ADS)

    D'Aniello, Elena; di Fiore, Vincenzo; Sacchi, Marco; Rapolla, Antonio

    2010-05-01

    were recognized. The correspondence between magnetic structures, interpreted as volcanic bodies, and the faults NE-SW and NW-SE trending, supports the hypothesis that the magma rises along normal faults cutting the carbonate platform. We here present two significant seismic profiles: their interpretation reveals a complex stratigraphic and structural setting, dominated by the occurrence of volcanic bodies and siliciclastic depositional units, mostly deriving from the dismantling of the adjacent vents and volcaniclastic units. The results of this preliminary research include the recognition of volcanic features and structures not yet described in the literature that may represent a relevant contribute to the understanding of the Late Quaternary evolution of the Campi Flegrei area. References: Bruno P.P., Rapolla A., Di Fiore V., 2003. Structural setting of the Bay of Naples (Italy) seismic reflection data: implications for Campanian volcanism. Tectonophysics, 372, 193-213. Bruno P.P., 2004. Structure and evolution of the Bay of Pozzuoli (Italy) using marine seismic reflection data: implication for collapse of the Campi Flegrei caldera. Bull. Volcanol., 66, 342-355. Di Fiore V., D'Aniello E., Rapolla A., Sacchi M., Secomandi M., Spiess V., 2009. Multichannel seismic survey in coastal Campania area by two different resolution sources. EGU General Assembly 2009, vol.11. Sacchi M., Alessio G., Aquino I., Esposito E., Molisso F., Nappi R., Porfido S., Violante C., 2008. Risultati preliminari della campagna oceanografica CAFE_07 - Leg 3 nei Golfi di Napoli e Pozzuoli, Mar Tirreno Orientale. Quaderni di Geofisica, n. 64. Secomandi M., Paoletti V., Aiello G., Fedi M., Marsella E., Ruggieri S., D'Argenio B., Rapolla A., 2003. Analysis of the magnetic anomaly field of the volcanic district of the Bay of Naples, Italy. Marine Geophysical Researches. 24: 207-221.

  10. Definition study for an extended manned test of a regenerative life support system, preliminary test plan

    NASA Technical Reports Server (NTRS)

    1971-01-01

    A preliminary plan and procedure are presented for conducting an extended manned test program for a regenerative life support system. Emphasis will be placed on elements associated with long-term system operation and long-term uninterrupted crew confinement.

  11. Aeromagnetic survey of Dillingham area in southwest Alaska, a website for the preliminary distribution of data

    USGS Publications Warehouse

    U.S. Geological Survey

    2006-01-01

    An airborne high-resolution magnetic survey was completed over the Dillingham and Nushagak Bay and Naknek area in southwestern Alaska. The flying was undertaken by McPhar Geosurveys Ltd. on behalf of the United States Geological Survey (USGS). First tests and calibration flights were completed by August 26th, 2005 and data acquisition was initiated on September 1st, 2005. The final data acquisition flight was completed on October 22nd, 2005. A total of 8,630 line-miles of data were acquired during the survey.

  12. Preliminary Evaluation of a Combined MicroPET®-MR System

    PubMed Central

    Hawkes, R. C.; Fryer, T. D.; Siegel, S.; Ansorge, R. E.; Carpenter, T. A.

    2015-01-01

    There are many motivations for adding simultaneously acquired MR images to PET scanning. The most straight forward are, superior registration of MR and PET images, the addition of morphological detail when there is non-rigid motion and for pre-clinical studies simultaneous imaging could lead to a significant reduction in the time that animals are required to be anesthetised. In addition simultaneous MR has the potential to provide accurate motion correction for PET image reconstruction. For functional imaging simultaneous acquisition is required to assess the subject in the same physiological state, such as acute stroke studies. The elimination of the additional radiation associated with combining CT with PET, by providing anatomic detail with MR, would be a crucial advantage for cancer screening. Combining the two instruments necessitates some engineering tradeoffs, especially associated with the use of the highly developed photomultiplier tube (PMT) used for light amplification, because of its incompatibility with strong magnetic fields. Our approach is to provide a split in the magnet and gradients to locate the magnetic sensitive components, the PMTs, in regions of low magnetic field, leaving only the essential PET components, the scintillator blocks, in the strong magnetic field region. The crystals are coupled to the PMTs by extending the optical fibres. A further advantage accrues by moving the PET electronics out of the region seen by the MR radio-frequency (RF) and gradient coils as electromagnetic interference effects between the PET and MR systems, which could cause artefacts in either modality, are eliminated. Here we describe a preliminary evaluation of the system, which is essentially a microPET Focus-120 located in a 1T split magnet, and compare its performance to previous microPET instruments. PMID:20082530

  13. A new GPS network around the Pamir: preliminary results from the first survey

    NASA Astrophysics Data System (ADS)

    He, J.; Pan, Z.; Ilhomjon, O.; Gadoev, M.; Rajabov, N.

    2012-12-01

    We have established a new survey mode GPS network around the Pamir, a highly tectonic active region associated with India-Asia collision. The network consists of 17 sites between 36° N and 41° N and 68 ° E and 76 ° E. This network has been surveyed once from 13 July to 24 August 2011. Each site has been surveyed for at least 48 hours over 3 to 4 days with Trimble NetR8 receivers and zephyr geodetic antennas. We use GAMIT/GLOBK software from the Massachusetts Institute of Technology to process the data using the nearest available Continuous GPS sites available (BJFS, XIAN, ULAB, IRKT, KUNM, LHAZ, URUM, GUAO, HYDE, SELE, POL2, TASH, KIT3). Then we combine each daily solution with the global daily solution provided by the Geodesy and Geodynamics team at MIT to estimate the ITRF2008 position of all the sites at their surveyed time. From the first survey, the quality of measurements is evaluated by presenting the short-term position repeatability of each site. Finally, combined with the re-survey finished in 2012, the site velocities have been estimated with respect to the stable Eurasia framework.

  14. Preliminary schistosomiasis survey in the lower Volta River below Akosombo Dam, Ghana.

    PubMed

    Wen, S T; Chu, K Y

    1984-04-01

    Snail surveys were carried out in Kpong Lake, in southern Ghana, and along the lower Volta River below the lake. Bulinus globosus and Biomphalaria pfeifferi were abundant in the Kpong Lake and B. truncatus and Biom . pfeifferi, especially the latter, were widespread below the lake. Urine surveys among primary school children at eight localities along the lower Volta showed Schistosoma haematobium prevalence rates of 38.8-96.2%. At Bator and Mepe , where records for an earlier survey were available for comparison, the present survey showed more than a doubling in prevalence rate in ten years: at Bator , from 27.1% in 1971-72 to 74.6% in 1981; at Mepe the corresponding figures were 36.4 and 88.0%. In Ghana infection with S. mansoni is less common than with S. haematobium and the known foci of S. mansoni transmission are few and widely scattered. In the present survey the disease is first reported along the lower Volta at Bator , Mepe , Adidome and Tefle , with prevalence rates ranging from 6.7% at Bator to 52.4% at Tefle . This survey has added an important focus of S. mansoni infection to those already known. PMID:6742926

  15. Preliminary Aging Assessment of Nuclear Air-Treatment and Cooling System Fans

    SciTech Connect

    Winegardner,, W. K.

    1995-07-01

    A preliminary aging assessment of the fans used in nuclear air treatment and cooling systems was performed by the Pacific Northwest Laboratory as part of the U.S. Nuclear Regulatory Commission's Nuclear Plant Aging Research Program. Details from guides and standards for the design, testing, and installation of fans; results of failure surveys; and information concerning stressors, related aging mechanisms, and inspection, surveillance, and monitoring methods (ISMM) were compiled. Failure surveys suggest that about half of the failures reported for fans are primarily associated with aging. Aging mechanisms associated with the various fan components and resulting from mechanical, thermal, and environmental stressors include wear, fatigue, corrosion, and erosion of metals and the deterioration of belts and lubricants. A bearing is the component most frequently linked to fan failure. The assessment also suggests that ISMM that will detect irregularities arising from improper lubrication, cooling, alignment, and balance of the various components should aid in counteracting many of the aging effects that could impair fan performance. An expanded program, to define and evaluate the adequacy of current ISMM and maintenance practices and to include a documented Phase I aging assessment, is recommended.

  16. The San Pedro Mártir Open Cluster Survey: Progress, Techniques, Preliminary Results

    NASA Astrophysics Data System (ADS)

    Schuster, W.; Michel, R.; Dias, W.; Tapia-Peralta, T.; Vázquez, R.; Macfarland, J.; Chavarría, C.; Santos, C.; Moitinho, A.

    2007-05-01

    A CCD UBVRI survey of northern open clusters is being undertaken at San Pedro Mártir, Mexico, and performed using always the same instrumental setup (telescope, CCD, filters), reduction methods, and system of standards (Landolt). To date more than 300 clusters (mostly unstudied previously) have been observed, and about half the data reduced using aperture-photometry and PSF techniques. Our analysis procedures are being refined by studying in detail a small subset of these clusters. For example, the heavily reddened clusters Be80 and Be95 are being examined in the color-color diagrams: (B-V,U-B) and (B-V,R-I) to better understand the problems of curvature and variable reddening. For clusters for which our U data reaches the F-type stars, such as NGC2192 and NGC7296, techniques are being examined for estimating both the reddening E(B-V) and metallicity [Fe/H] via the use of the (U-B) excess. If the clusters also have "red clump" stars, such as NGC1798 and Do02, these procedures can be iterated between the clump and main sequence stars to establish even better the values of E(B-V) and [Fe/H]. Finally, color-magnitude diagrams, such as (B-V,V) and (V-I,V), are being employed together with the Schmidt-Kaler colors and Padova isochrones to obtain distances and ages for these clusters. A java-based computer program is being developed to help in the visualization and analysis of these photometric data. This system is capable of displaying each cluster simultaneously in different color-color and color-magnitude diagrams and has an interactive way to identify a star, or group of stars, in one diagram and to see were it falls in the other diagrams, facilitating the elimination of field stars and the apperception of cluster features. This program is capable of displaying up to 16 different diagrams for one cluster and processing up to 20 clusters at the same time. Our aims are the following: (1) a common UBVRI photometric scale for open clusters, (2) an atlas of color

  17. Integrated alarm annunciation and entry control systems -- Survey results

    SciTech Connect

    Clever, J.J.; Arakaki, L.H.; Monaco, F.M.; Juarros, L.E.; Quintana, G.R.

    1993-10-01

    This report provides the results and analyses of a detailed survey undertaken in Summer 1993 to address integrated intrusion detection alarm annunciation and entry control system issues. This survey was undertaken as a first attempt toward beginning to answer questions about integrated systems and commercial capabilities to meet or partially meet US Department of Energy (DOE) site needs.

  18. Data acquisition systems for the Sloan Digital Sky Survey

    SciTech Connect

    Petravick, D.; Berman, E.; MacKinnon, B.; Nicinski, T.; Pordes, R.; Sergey, G.; Rechenmacher, R.; Annis, J.; Kent, S.; McKay, T.; Stoughton, C.; Husby, D.

    1994-03-01

    The Sloan Digital Sky Survey (SDSS) will image {Pi} steradians about the north galactic cap in five filters, and acquire one million spectra using a dedicated 2.5 meter telescope at the Apache Point Observatory in New Mexico. The authors describe the data acquisition system for the survey`s three main detectors: an imaging camera, mounting 54 Tektronix charge-coupled devices (CCD); a pair of spectrographs, each mounting a pair of CCDs; and a smaller monitor telescope camera. The authors describe the system`s hardware and software architecture, and relate it to the survey`s special requirements for high reliability and need to understand its instrumentation in order to produce a consistent survey over a five year period.

  19. The Outer Solar System Origins Survey: VO and Software Perspective

    NASA Astrophysics Data System (ADS)

    Kavelaars, J.

    2013-10-01

    There has been a substantial increase in the number of operating and planned ground (Catalina Sky Survey, Space Watch, SDSS, Canada-France Ecliptic Plane Survey, PanStarrs, SkyMapper, LSST, etc.) and space (eg. NEOSSAT, Euclid) based surveys searching for objects within the solar system. These surveys must attempt to maximize their detection of sources that move through the images and tracking those objects until a firm orbit can be determined, while minimizing the reporting of false positives. These sorts of surveys have also lead to a growing industry of moving object search interfaces at the archive level (such as the CADC's Solar System Object Search). In this presentation I will review the general science cases for moving object surveys (from Kuiper belt to Oort Cloud Objects) and the various innovative (and brute force) algorithms and computing systems that have been developed to crack the moving object detection problem.

  20. A survey on open source software testing tools: a preliminary study in 2011

    NASA Astrophysics Data System (ADS)

    Emami, Seyed Amir; Sim, Jason Chin Lung; Sim, Kwan Yong

    2011-12-01

    Software Testing is a costly and time consuming process in software development. Therefore, software testing tools are often deployed to automate the process in order to reduce cost and improve efficiency. However, many of them are proprietary and expensive. Hence, open source software testing tools could be an appealing alternative. In this paper, we survey the current states of open source software testing tools from three aspects, namely, their availability for different programming platforms and types testing activities, maintenance of the tools and license limitations. From the 152 tools surveyed, we found that open source software testing tools not only are widely available for popular programming platforms, but also support a wide range of testing activities. Furthermore, we also found that more than half of the tools surveyed have been actively maintained and updated by the open source communities. Finally, these tools have very few licensing limitations for commercial use, customization and redistribution.

  1. Preliminary Results of Detailed Chemical Abundance Analysis of Milky Way Satellite Galaxy Reticulum II Discovered in the Dark Energy Survey

    NASA Astrophysics Data System (ADS)

    Nagasawa, Daniel; Marshall, Jennifer L.; Li, Ting; Dark Energy Survey Milky Way Science Group

    2016-01-01

    We present preliminary results from abundance analysis of stars in Milky Way satellite galaxies found in the Dark Energy Survey (DES). DES has discovered 16 candidate satellite galaxies of the Milky Way in its first two years of operation. Since January 2015, three candidates have subsequently been revealed to be dark matter-dominated by spectroscopic follow-up studies of their kinematics, confirming their status as satellite galaxies. Spectroscopic follow-up of the remaining 13 candidates is underway. We have analyzed high resolution VLT/GIRAFFE spectra of member stars in one of these satellite galaxies, Reticulum II. Using equivalent width measurement and spectral synthesis methods, we measure the abundances of Iron and other species in order to begin to understand the chemical content of these Milky Way satellites.

  2. Urinary schistosomiasis in rural communities of some local government areas in Plateau State, Nigeria: a preliminary parasitological and malacological survey.

    PubMed

    Akufongwe, P F; Dakul, D A; Michael, P D; Dajagat, P D; Arabs, W L

    1996-03-01

    A preliminary parasitological and malacological survey was effected in rural communities of some Local Government Areas (LGA) in Plateau State, Nigeria, to estimate the prevalence of urinary schistosomiasis and identify active transmission foci. Out of 2888 persons examined in six LGAs, 1381 (47.82%) were excreting eggs of Schistosoma haematobium in their urine. Prevalence rates did not vary significantly (P > 0.05) between the LGAs: Pankshin (62.4%), Shendam (40.2%), Qua'an-Pan (22.9%), Langtang South (45.4%), Langtang North (58.8%) and Wase (50.0%). Infection rates were significantly different (P < 0.001) between the sexes. Many water bodies in the study communities were colonized by infected Bulinus snails. Snail infection rates varied significantly (P < 0.001) between the dry and wet seasons. A positive correlation was observed between snail infection rates and the prevalence of S. haematobium. PMID:8960195

  3. Implications of Preliminary Gravity and Magnetic Surveys to the Understanding of the Bartlett Springs Fault Zone, Northern California Coast Ranges

    NASA Astrophysics Data System (ADS)

    Langenheim, V. E.; Jachens, R. C.; Morin, R. L.; McCabe, C. M.; Page, W. D.

    2007-12-01

    We use new gravity and magnetic data in the Lake Pillsbury region to help understand the geometry and character of the Bartlett Springs fault zone, one of the three main strands of the San Andreas system north of the San Francisco Bay area. We collected 153 new gravity stations in the Lake Pillsbury region that complement the sparse regional dataset and are used to estimate the thickness of Quaternary deposits in the inferred Gravelly Valley (Lake Pillsbury) pull-apart basin. We also collected 38 line-km of ground magnetic data on roads and 65 line-km by boat on the lake to supplement regional aeromagnetic surveys and to map concealed fault strands beneath the lake. The new gravity data show a significant northwest-striking gravity gradient at the base of which lies the Bartlett Springs fault zone. Superposed on this major east-facing gravity gradient is a 5 mGal low centered on Lake Pillsbury and Gravelly Valley. Inversion of the gravity field for basin thickness assuming a density contrast of 400 kg/m3 indicates the deepest part of the basin is about 400 m and located in the northern part of the valley, although the inversion lacks gravity stations within the lake. The basin is about 3 km wide and 5 km long and basin edges coincide with strands of the Bartlett Springs fault zone. Our gravity data suggest that Potter Valley, which lies between the Maacama and Bartlett Springs faults, is also as much as 400 m deep in the southern part of the valley, although additional data west of the valley would better isolate the gravity low. Geomorphologic characteristics of the valley suggest that this structure has been quiescent during the late Quaternary. Ground magnetic data are very noisy but the data in conjunction with 9.6 km-spaced NURE aeromagnetic lines suggest that regional analog aeromagnetic data flown in 1962 may suffer from location errors. The regional and NURE data show a northwest-striking magnetic high that extends across Lake Pillsbury. The northeast edge

  4. Landscape and geomorphic survey of Zhamanshin area, Northern Kazakhstan: Preliminary report on 1992 field trip data

    NASA Technical Reports Server (NTRS)

    Burba, G. G., Jr.; Meshcherskaya, V. A.

    1993-01-01

    The June 1992 geographical expedition to Zhamanshin crater area made a landscape and geomorphic survey of this impact structure. Observational points in the area of 300 sq km give new data on the geographical processes in the impact crater. The data obtained could be applied to search for unknown impact structures anywhere through the traces of such features in landscapes.

  5. Willoughby-Eastlake Public Library: A Preliminary Survey of Voter Attitudes.

    ERIC Educational Resources Information Center

    Jeschelnig, Virginia E.

    This study is the pilot project of a feasibility study to measure a community's receptiveness to a tax increase for public library capital improvements and to plan the marketing campaign to improve the likelihood of passage in Lake County, Ohio. This initial phase of the survey examined the pertinent profile of one community, the Village of…

  6. Substance Use by Hispanic and White Non-Hispanic Pregnant Adolescents: A Preliminary Survey.

    ERIC Educational Resources Information Center

    Moss, Nancy; Hensleigh, Paul A.

    1988-01-01

    A survey of 23 White and 58 Hispanic adolescent mothers (up to 17 years old) indicated that over 50 percent used cigarettes, marijuana, or alcohol before 12-16 weeks of pregnancy, but most substance use ceased after 12-16 weeks of pregnancy. No significant differences existed between ethnic groups in substance use. (SLD)

  7. Preliminary Country Reports on Feasibility Survey: Policy Research and Education Institutions for Developing Countries.

    ERIC Educational Resources Information Center

    Mitchell, James M.; Luikart, F. W.

    The feasibility of creating independent research and education centers that deal with public policy issues in developing countries is assessed. Countries that were surveyed include Brazil, Colombia, Bolivia, Costa Rica, Guatemala, South Korea, Philippines, Pakistan, and Nepal. For each country, a report describes the social and political climate…

  8. A New Culture of Assessment: Preliminary Report on the ARL SERVQUAL Survey.

    ERIC Educational Resources Information Center

    Cook, Colleen; Heath, Fred; Thompson, Bruce

    Texas A&M University and the Association of Research Libraries (ARL) under the New Measures initiative are engaged in a project to evaluate service quality in research libraries using an augmented SERVQUAL instrument. In spring 2000, 13 ARL libraries in North America invited a random sample of students and faculty to take the survey through the…

  9. Preservice Teachers' Responses to the "Survey of Children's Legal Rights": Preliminary Analyses.

    ERIC Educational Resources Information Center

    Sametz, Lynn; And Others

    Preservice teachers' knowledge of the law as it affects students was investigated. Forty-seven preservice teachers, most of whom were undergraduates affiliated with a college of physical education, completed a survey addressing: (1) child abuse; (2) freedom of speech and press; (3) suspension and expulsion from school; (4) corporal punishment; (5)…

  10. DA white dwarfs from the LSS-GAC survey DR1: the preliminary luminosity and mass functions and formation rate

    NASA Astrophysics Data System (ADS)

    Rebassa-Mansergas, A.; Liu, X.-W.; Cojocaru, R.; Yuan, H.-B.; Torres, S.; García-Berro, E.; Xiang, M.-X.; Huang, Y.; Koester, D.; Hou, Y.; Li, G.; Zhang, Y.

    2015-06-01

    Modern large-scale surveys have allowed the identification of large numbers of white dwarfs. However, these surveys are subject to complicated target selection algorithms, which make it almost impossible to quantify to what extent the observational biases affect the observed populations. The LAMOST (Large Sky Area Multi-Object Fiber Spectroscopic Telescope) Spectroscopic Survey of the Galactic anticentre (LSS-GAC) follows a well-defined set of criteria for selecting targets for observations. This advantage over previous surveys has been fully exploited here to identify a small yet well-characterized magnitude-limited sample of hydrogen-rich (DA) white dwarfs. We derive preliminary LSS-GAC DA white dwarf luminosity and mass functions. The space density and average formation rate of DA white dwarfs we derive are 0.83 ± 0.16 × 10-3 pc-3 and 5.42 ± 0.08 × 10-13 pc-3 yr-1, respectively. Additionally, using an existing Monte Carlo population synthesis code we simulate the population of single DA white dwarfs in the Galactic anticentre, under various assumptions. The synthetic populations are passed through the LSS-GAC selection criteria, taking into account all possible observational biases. This allows us to perform a meaningful comparison of the observed and simulated distributions. We find that the LSS-GAC set of criteria is highly efficient in selecting white dwarfs for spectroscopic observations (80-85 per cent) and that, overall, our simulations reproduce well the observed luminosity function. However, they fail at reproducing an excess of massive white dwarfs present in the observed mass function. A plausible explanation for this is that a sizable fraction of massive white dwarfs in the Galaxy are the product of white dwarf-white dwarf mergers.

  11. Preliminary design document: Ground based testbed for avionics systems

    NASA Technical Reports Server (NTRS)

    1989-01-01

    The design and interface requirements for an avionics Ground Based Test bed (GBT) to support Heavy Lift Cargo Vehicles (HLCV) is presented. It also contains data on the vehicle subsystem configurations that are to be supported during their early, pre-PDR developmental phases. Several emerging technologies are also identified for support. A Preliminary Specification Tree is also presented.

  12. PRELIMINARY ECONOMIC ANALYSIS OF A LIME SPRAY DRYER FGD SYSTEM

    EPA Science Inventory

    The report gives results of a preliminary economic analysis of two flue gas desulfurization (FGD) processes (one dry and one wet) for a new 500-MW power plant burning Western coal having 0.7% sulfur, 9.7% ash, and a heating value of 9700 Btu/lb and meeting current new source perf...

  13. TAOS: An Occultation Survey of the Outer Solar System

    NASA Astrophysics Data System (ADS)

    Lehner, M. J.; Alcock, C.; Axelrod, T.; Bianco, F. B.; Byun, Y.-I.; Chen, W. P.; Cook, K. H.; de Pater, I.; Geary, J. C.; Kim, D.-W.; King, S.-K.; Lee, T.; Marshall, S. L.; Norton, T.; Protopapas, P.; Rice, J. A.; Ruiz Reyes, M.; Schwamb, M. E.; Szentgyorgyi, A.; Wang, J.-H.; Wang, S.-Y.; Wen, C.-Y.; Zhang, Z.-W.

    2011-10-01

    The Taiwanese-American Occultation survey (TAOS) operate four small telescopes in central Taiwan to search for occultations by small (∼1 km diameter) Kuiper Belt Objects. The system is fully robotic, requiring human intervention only in the event of hardware failures. However, the status of the system during observations is monitored remotely via smart-phone. A successor survey, the Transneptunian Automated Occultation Survey (TAOS II)1 is currently being constructed. This next generation survey will be more than one hundred times as sensitive as the earlier survey. In my talk I will present the results of TAOS I, discuss the future plans of the survey, and provide a detailed description of the TAOS II project.

  14. Preliminary survey report: control technology for gallium arsenide processing at Hewlett Packard, San Jose, California

    SciTech Connect

    Lenihan, K.L.

    1987-04-01

    A walk-through survey of the Hewlett Packard Company facility in San Jose, California, was prompted by an interest in the use of gallium arsenide as an alternative to silicon for the semiconductor industry. This facility produced gallium-arsenide and gallium phosphide Potential hazards existed from solvents, acids, and gases employed in wafer production. Some of the solvents included fluorocarbon compounds, xylene, and 1,1,1-trichloroethane Arsine, phosphine, hydrogen, and silane gases were used in the production processes. Worker exposures to gallium arsenide or arsenic dust were lower during the cleaning operation than they had been in other similar facilities, perhaps due to the small size of the crystal pullers used at this particular facility. According to the author, this facility is a possible candidate for an in-depth industry survey, but may not be representative of the entire industry.

  15. Preliminary survey report: control technology for ethylene oxide sterilization at Selby General Hospital, Marietta, Ohio

    SciTech Connect

    Kercher, S.L.; Mortimer, V.D.; Todd, W.F.

    1985-08-01

    A survey of control technology for reducing exposure during ethylene oxide sterilization was conducted at Selby General Hospital, Marietta, Ohio on August 30, 1984. The Central Services Department performed ethylene oxide sterilization for obstetrics, neonatal care, respiratory therapy, cytology, isolation cases, and surgery. Engineering controls consisted of isolation of the sterilizer and aerators, local exhaust ventilation, a continuous fresh air purge on the sterilization cycle, in chamber aeration of the sterilizers, and general exhaust ventilation of the Central Services Department and the sterilizer room. The author concludes that the Central Services Department has instituted control technology that minimizes employee exposure to ethylene-oxide. The hospital should be considered a candidate for an in-depth survey in a NIOSH study of control technology for ethylene oxide sterilization in hospitals.

  16. Preliminary Results of National Amyotrophic Lateral Sclerosis (ALS) Registry Risk Factor Survey Data

    PubMed Central

    2016-01-01

    Background The National ALS Registry is made up of two components to capture amyotrophic lateral sclerosis (ALS) cases: national administrative databases (Medicare, Medicaid, Veterans Health Administration and Veterans Benefits Administration) and self-identified cases captured by the Registry’s web portal. This study describes self-reported characteristics of U.S. adults with ALS using the data collected by the National ALS Registry web portal risk factor surveys only from October 19, 2010 through December 31, 2013. Objective To describe findings from the National ALS Registry’s web portal risk factor surveys. Measurements The prevalence of select risk factors among adults with ALS was determined by calculating the frequencies of select risk factors—smoking and alcohol (non, current and former) histories, military service and occupational history, and family history of neurodegenerative diseases such as ALS, Alzheimer’s and/or Parkinson’s. Results Nearly half of survey respondents were ever smokers compared with nearly 41% of adults nationally. Most respondents were ever drinkers which is comparable to national estimates. The majority were light drinkers. Nearly one-quarter of survey respondents were veterans compared with roughly 9% of US adults nationally. Most respondents were retired or disabled. The industries in which respondents were employed for the longest time were Professional and Scientific and Technical Services. When family history of neurodegenerative diseases in first degree relatives was evaluated against our comparison group, the rates of ALS were similar, but were higher for Parkinson’s disease, Alzheimer’s disease and any neurodegenerative diseases. Conclusions The National ALS Registry web portal, to our knowledge, is the largest, most geographically diverse collection of risk factor data about adults living with ALS. Various characteristics were consistent with other published studies on ALS risk factors and will allow

  17. Preliminary survey and performance of land subsidence in North Semarang Demak

    NASA Astrophysics Data System (ADS)

    Yuwono, B. D.; Abidin, H. Z.; Gumilar, I.; Andreas, H.; Awaluddin, M.; Haqqi, K. F.; Khoirunisa, R.

    2016-05-01

    Land subsidence in Semarang is a severe hazard threatening people and urban infrastructure. Land subsidence is suspected expand to North Demak. It shows that has been leading to severe and costly damages to urban infrastructure such as buildings and roads. Another disaster like flooding will ruin the city frequently and is increasingly severely affecting the living conditions. The Principle of land subsidence monitoring with a GPS is to determine the coordinates of a point on a carefully selected location and are conducted periodically at regular. By studying the characteristic and speed of change in ellipsoid height of the point - the point of the survey is a survey to the next, then the greater the reduction in soil characteristics and will be known. This paper mainly discusses the results obtained by GPS surveys that have been conducted in 2011, 2013, 2014 and2015. Land subsidence in Semarang until now still occur, especially in the northern region of Semarang. In the range of 2011-2015 land subsidence rates of 15 cm / year besides that for studying land subsidence in Demak, there was 10 Bench Mark was established.

  18. Preliminary study of a radiological survey in an abandoned uranium mining area in Madagascar

    NASA Astrophysics Data System (ADS)

    N, Rabesiranana; M, Rasolonirina; F, Solonjara A.; Andriambololona., Raoelina; L, Mabit

    2010-05-01

    The region of Vinaninkarena located in central Madagascar (47°02'40"E, 19°57'17"S), is known to be a high natural radioactive area. Uranium ore was extracted in this region during the 1950s and the early 1960s. In the mid-1960s, mining activities were stopped and the site abandoned. In the meantime, the region, which used to be without any inhabitants, has recently been occupied by new settlers with presumed increase in exposure of the local population to natural ionizing radiation. In order to assess radiological risk, a survey to assess the soil natural radioactivity background was conducted during the year 2004. This study was implemented in the frame of the FADES Project SP99v1b_21 entitled: Assessment of the environmental pollution by multidisciplinary approach, and the International Atomic Energy Agency Technical Cooperation Project MAG 7002 entitled: Effects of air and water pollution on human health. Global Positioning System (GPS) was used to determine the geographical coordinates of the top soil samples (0-15cm) collected. The sampling was performed using a multi integrated scale approach to estimate the spatial variability of the parameters under investigation (U, Th and K) using geo-statistical approach. A total of 205 soil samples was collected in the study site (16 km2). After humidity correction, the samples were sealed in 100 cm3 cylindrical air-tight plastic containers and stored for more than 6 months to reach a secular equilibrium between parents and short-lived progeny (226Ra and progeny, 238U and 234Th). Measurements were performed using a high-resolution HPGe Gamma-detector with a 30% relative efficiency and an energy resolution of 1.8 keV at 1332.5 keV, allowing the determination of the uranium and thorium series and 40K. In case of secular equilibrium, a non-gamma-emitting radionuclide activity was deduced from its gamma emitting progeny. This was the case for 238U (from 234Th), 226Ra (from 214Pb and 214Bi) and 232Th (from 228Ac, 212Pb or

  19. ON-LINE PREDICTION OF YIELD GRADE, LONGISSIMUS MUSCLE AREA, PRELIMINARY YIELD GRADE, ADJUSTED PRELIMINARY YIELD GRADE, AND MARBLING SCORE USING THE MARC BEEF CARCASS IMAGE ANALYSIS SYSTEM

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The present experiment was conducted to evaluate the ability of the MARC Beef Carcass Image Analysis System to predict calculated yield grade, longissimus area, preliminary yield grade, adjusted preliminary yield grade, and marbling score under commercial beef processing conditions. In two commerci...

  20. Accurate Atmospheric Parameters at Moderate Resolution Using Spectral Indices: Preliminary Application to the MARVELS Survey

    NASA Astrophysics Data System (ADS)

    Ghezzi, Luan; Dutra-Ferreira, Letícia; Lorenzo-Oliveira, Diego; Porto de Mello, Gustavo F.; Santiago, Basílio X.; De Lee, Nathan; Lee, Brian L.; da Costa, Luiz N.; Maia, Marcio A. G.; Ogando, Ricardo L. C.; Wisniewski, John P.; González Hernández, Jonay I.; Stassun, Keivan G.; Fleming, Scott W.; Schneider, Donald P.; Mahadevan, Suvrath; Cargile, Phillip; Ge, Jian; Pepper, Joshua; Wang, Ji; Paegert, Martin

    2014-12-01

    Studies of Galactic chemical, and dynamical evolution in the solar neighborhood depend on the availability of precise atmospheric parameters (effective temperature T eff, metallicity [Fe/H], and surface gravity log g) for solar-type stars. Many large-scale spectroscopic surveys operate at low to moderate spectral resolution for efficiency in observing large samples, which makes the stellar characterization difficult due to the high degree of blending of spectral features. Therefore, most surveys employ spectral synthesis, which is a powerful technique, but relies heavily on the completeness and accuracy of atomic line databases and can yield possibly correlated atmospheric parameters. In this work, we use an alternative method based on spectral indices to determine the atmospheric parameters of a sample of nearby FGK dwarfs and subgiants observed by the MARVELS survey at moderate resolving power (R ~ 12,000). To avoid a time-consuming manual analysis, we have developed three codes to automatically normalize the observed spectra, measure the equivalent widths of the indices, and, through a comparison of those with values calculated with predetermined calibrations, estimate the atmospheric parameters of the stars. The calibrations were derived using a sample of 309 stars with precise stellar parameters obtained from the analysis of high-resolution FEROS spectra, permitting the low-resolution equivalent widths to be directly related to the stellar parameters. A validation test of the method was conducted with a sample of 30 MARVELS targets that also have reliable atmospheric parameters derived from the high-resolution spectra and spectroscopic analysis based on the excitation and ionization equilibria method. Our approach was able to recover the parameters within 80 K for T eff, 0.05 dex for [Fe/H], and 0.15 dex for log g, values that are lower than or equal to the typical external uncertainties found between different high-resolution analyses. An additional test was

  1. Disclosure of Membership in the Lesbian, Gay, Bisexual, and Transgender Community by Individuals with Communication Impairments: A Preliminary Web-Based Survey

    ERIC Educational Resources Information Center

    Kelly, Rebecca J.; Robinson, Gregory C.

    2011-01-01

    Purpose: The purpose of this preliminary investigation was to examine potential barriers to seeking services for communication impairments perceived by lesbian, gay, bisexual, and transgender (LGBT) people. Specifically, this clinical survey investigated (a) the rate and importance of disclosure of membership in the LGBT community by people with…

  2. Shoe-box orbit determination system for SMM preliminary results

    NASA Technical Reports Server (NTRS)

    Tasaki, K. K.; Goorevich, C.

    1979-01-01

    The implementation of both sequential and batch methods of estimation on IMP-16 microprocessors was investigated. Simulated data was used from a tracking and data relay satellite whose target satellite was the Solar Maximum Mission. An interesting feature of the hardware was the use of two interconnected IMP-16's. Some preliminary results from the study, as well as the difficulties and advantages in the use of microprocessors, are presented.

  3. A preliminary summary of a seismic-refraction survey in the vicinity of the Tonto Forest Observatory, Arizona

    USGS Publications Warehouse

    Roller, J.C.; Jackson, W.H.; Warren, D.H.; Healy, J.H.

    1964-01-01

    The U.S. Geological Survey complete d a seismic-refraction survey in the vicinity of the Tonto Forest Seismological Observatory (T.F.S.O.) in April and May 1964. More than 1200 km of reversed profiles were surveyed to determine the crustal structure and crustal and upper mantle velocities in this area. The purpose of this work was to provide information on wave-propagation paths of seismic events recorded at T.F.S.O. and to improve the performance of the Observatory in locating and identifying these events. First arrivals indicate that the Mohorovicic discontinuity dips to the northeast by as much as 6 degrees under T.F.S.O., and may even be displaced vertically by as much as 5 km immediately north of the Observatory near the boundary of the Basin and Range a n d t he Colorado Plateau Provinces. A preliminary examination of the first arrivals indicates that the crust at T.F.S.O. is at least 30 km thick and is made up of at least two seismic layers. A thin veneer at the surface with a velocity of approximately 4 km/sec is underlain by a layer with a velocity of approximately 5.9 km/sec to 6.1 km/sec. An intermediate layer with velocity of 6.6 to 7.0 km/sec is probably present in the lower crust, but is not revealed by first arrivals. The velocity of seismic waves in the upper mantle is about 7.9 km/sec.

  4. Accurate atmospheric parameters at moderate resolution using spectral indices: Preliminary application to the marvels survey

    SciTech Connect

    Ghezzi, Luan; Da Costa, Luiz N.; Maia, Marcio A. G.; Ogando, Ricardo L. C.; Dutra-Ferreira, Letícia; Lorenzo-Oliveira, Diego; Porto de Mello, Gustavo F.; Santiago, Basílio X.; De Lee, Nathan; Lee, Brian L.; Ge, Jian; Wisniewski, John P.; González Hernández, Jonay I.; Stassun, Keivan G.; Cargile, Phillip; Pepper, Joshua; Fleming, Scott W.; Schneider, Donald P.; Mahadevan, Suvrath; Wang, Ji; and others

    2014-12-01

    Studies of Galactic chemical, and dynamical evolution in the solar neighborhood depend on the availability of precise atmospheric parameters (effective temperature T {sub eff}, metallicity [Fe/H], and surface gravity log g) for solar-type stars. Many large-scale spectroscopic surveys operate at low to moderate spectral resolution for efficiency in observing large samples, which makes the stellar characterization difficult due to the high degree of blending of spectral features. Therefore, most surveys employ spectral synthesis, which is a powerful technique, but relies heavily on the completeness and accuracy of atomic line databases and can yield possibly correlated atmospheric parameters. In this work, we use an alternative method based on spectral indices to determine the atmospheric parameters of a sample of nearby FGK dwarfs and subgiants observed by the MARVELS survey at moderate resolving power (R ∼ 12,000). To avoid a time-consuming manual analysis, we have developed three codes to automatically normalize the observed spectra, measure the equivalent widths of the indices, and, through a comparison of those with values calculated with predetermined calibrations, estimate the atmospheric parameters of the stars. The calibrations were derived using a sample of 309 stars with precise stellar parameters obtained from the analysis of high-resolution FEROS spectra, permitting the low-resolution equivalent widths to be directly related to the stellar parameters. A validation test of the method was conducted with a sample of 30 MARVELS targets that also have reliable atmospheric parameters derived from the high-resolution spectra and spectroscopic analysis based on the excitation and ionization equilibria method. Our approach was able to recover the parameters within 80 K for T {sub eff}, 0.05 dex for [Fe/H], and 0.15 dex for log g, values that are lower than or equal to the typical external uncertainties found between different high-resolution analyses. An

  5. A preliminary survey of the epidemiology of bluetongue in Costa Rica and northern Colombia.

    PubMed Central

    Homan, E. J.; Lorbacher de Ruiz, H.; Donato, A. P.; Taylor, W. P.; Yuill, T. M.

    1985-01-01

    Recent evidence of bluetongue (BT) virus infection of livestock in scattered localities in the neotropics prompted a serologic survey of cattle in Colombia and Costa Rica. In Costa Rica 48.1% of 1435 bovine animals had BT virus antibody in the agar gel precipitation test (AGPT). In Colombia 51.8% of 635 cattle were AGPT-positive for BT virus. Antibody prevalence ranged from over 50% in the lowlands to 0% in Costa Rica and 19% in Colombian cattle above 2000 m altitude. Neutralization tests indicated that Costa Rican cattle had been exposed to BT virus types 6, 12, 14 and 17. PMID:2989360

  6. A preliminary survey of the artisanal fishery on coral reefs of the Tulear Region (southwest Madagascar)

    NASA Astrophysics Data System (ADS)

    Laroche, J.; Ramananarivo, N.

    1995-11-01

    Fish catches from the coral reefs of the Tulear region (southwest Madagascar), are analyzed based on fish landings. This region of the island consists of two barrier reefs, two coral banks, three lagoon reefs and a fringing reef. The total reef area studied was 190 km2. Of the whole fishing area, the reef flat was the most frequently used by fishermen. Line catches per unit effort (CPUE) were stable throughout the eight month sampling period (6 to 8 kg/trip to sea), whereas gillnet and seine catches showed differences between the cold period and the warm period. These results appear to be representative of the artisanal fishery catches in the southwest Indian Ocean. Annual fish yield was estimated at 12 t km-2 yr-1. Comparable yields have been recorded in certain regions of the Indo-Pacific, that have similar ratios of coral reef area to adjacent shallows and similar fishing practices. Reef species (Lethrinidae, Siganidae) dominated the catches. At present, coastal waters of the Tulear region are heavily fished, and the fishermen report a progressive decrease in the average size of fish caught over the last 15 years. Management measures are suggested, based on preliminary findings.

  7. Preliminary Results of a Magnetotelluric Survey in the Center of Hawaii Island

    NASA Astrophysics Data System (ADS)

    Lienert, B. R.; Thomas, D. M.; Wallin, E.

    2014-12-01

    From 2013 up to the present we have been recording magnetotelluric (MT) data at 25 sites in a 35x25 km region (elev. 1943 m) on the saddle between the active volcano of Mauna Loa (4169 m) and the dormant volcano of Mauna Kea (4205 m) on Hawai'i Island. The MT data, particularly the electric fields, are frequently contaminated by spurious components that are not due to the plane-wave magnetic signals required for derivation of the MT impedance tensor. We therefore developed interactive graphical software (MTPlot) to plot and analyze the MT signals in the field. MTPlot allows us to quickly examine records in both the time and frequency domain to in order to judge their quality. It also transforms the data into estimates of apparent resistivity and their error in the frequency range 0.001-500 Hz. This has proved very useful for selecting suitable records for subsequent analysis. We then use multi-taper remote reference processing to obtain our final apparent resistivity estimates and their errors. We present preliminary results of one and two dimensional modeling of these estimates to obtain the three-dimensional distribution of subsurface resistivities down to depths of 5 km. The results are compared to temperatures and properties of cores obtained when we drilled a research hole to a depth of 1760 m in this same region. We shall discuss how our results relate to the extent of the fresh-water and geothermal energy reservoirs that we discovered during drilling.

  8. Radiologists' requirements for primary diagnosis workstations: preliminary results of task-based design surveys

    NASA Astrophysics Data System (ADS)

    Hohman, Suzan A.; Johnson, Sandra L.; Valentino, Daniel J.; Taira, Ricky K.; Manzo, William A.

    1994-05-01

    There has been a tremendous amount of effort put into the design of diagnostic radiology workstations; however, few workstations have been clinically accepted. Among the requirements for a clinically acceptable workstation are good image quality, a well designed user-interface, and access to all relevant diagnostic information. The user-interface design should reflect radiologist's film reading habits and encourage new reading methods that take advantage of the electronic environment. As part of our effort to improve diagnostic workstation design, we surveyed radiologists in the UCLA Department of Radiological Sciences. Sixteen radiologists from the fields of pediatric, genitourinary, thoracic, and neuroradiology participated in the initial survey. We asked their opinions regarding our PACS infrastructure performance and our existing diagnostic workstations. We also asked them to identify certain pathologies that they found to be less evident on workstations as compared to film. We are using this information to determine the current limitations of diagnostic workstations and to develop a user interface design that addresses the clinical requirements of a busy teritiary care medical center the radiologists who use it.

  9. Survey of college climates at all 28 US colleges and schools of veterinary medicine: preliminary findings.

    PubMed

    Greenhill, Lisa M; Carmichael, K Paige

    2014-01-01

    In April 2011, a nationwide survey of all 28 US veterinary schools was conducted to determine the comfort level (college climate) of veterinary medical students with people from whom they are different. The original hypothesis was that some historically underrepresented students, especially those who may exhibit differences from the predominant race, ethnicity, religion, gender, or sexual orientation, experience a less welcoming college climate. Nearly half of all US students responded to the survey, allowing investigators to make conclusions from the resulting data at a 99% CI with an error rate of less than 2% using Fowler's sample-size formula. Valuable information was captured despite a few study limitations, such as occasional spurious data reporting and little ability to respond in an open-ended manner (most questions had a finite number of allowed responses). The data suggest that while overall the majority of the student population is comfortable in American colleges, some individuals who are underrepresented in veterinary medicine (URVM) may not feel the same level of acceptance or inclusivity on veterinary school campuses. Further examination of these data sets may explain some of the unacceptably lower retention rates of some of these URVM students on campuses. PMID:24855030

  10. The Samoa tsunami of 29 September 2009: Field survey in Tonga and preliminary modeling

    NASA Astrophysics Data System (ADS)

    Okal, E. A.; Fritz, H. M.; Borrero, J. C.

    2010-05-01

    The two northernmost islands in Tonga, Niuatoputapu and Tafahi, were hit hard by the Samoa tsunami of 29 September 2009, with considerable devastation on the former, where nine people were killed. A surveying team consisting of HMF and EAO visited the islands in late November. On Niuatoputapu, we document extreme inundation reaching 600 m on the Southern coast, and a complete overrun of the Northeastern tip at Hikuniu Point, with flow depths reaching 10 m for a total wave height of 16 m. The forests were totally destroyed, and apparently provided no barrier to waves of such height. On the small stratovolcano island of Tafahi, run-up reached 22.8 m on the lee side of the island. The three villages of Niuatoputapu were provided a relative level of protection by the fringing coral reef present on the Northern shore. Seven of the nine victims were riding in a pick-up truck on a road parallel to the coast. One point, with run-up of 4 m, was also surveyed on the island of Niuafo'ou, 200 km further West. We present a number of numerical simulations, using several models of the seismic source, which correctly predict enhanced amplitudes in the direction of the Northern Tonga Islands as a result of focusing by shallow bathymetry at the bend marking the Northern end of the Tonga subduction zone.

  11. Preliminary control system design and analysis for the Space Station Furnace Facility thermal control system

    NASA Technical Reports Server (NTRS)

    Jackson, M. E.

    1995-01-01

    This report presents the Space Station Furnace Facility (SSFF) thermal control system (TCS) preliminary control system design and analysis. The SSFF provides the necessary core systems to operate various materials processing furnaces. The TCS is defined as one of the core systems, and its function is to collect excess heat from furnaces and to provide precise cold temperature control of components and of certain furnace zones. Physical interconnection of parallel thermal control subsystems through a common pump implies the description of the TCS by coupled nonlinear differential equations in pressure and flow. This report formulates the system equations and develops the controllers that cause the interconnected subsystems to satisfy flow rate tracking requirements. Extensive digital simulation results are presented to show the flow rate tracking performance.

  12. Use of High Fidelity Methods in Multidisciplinary Optimization-A Preliminary Survey

    NASA Technical Reports Server (NTRS)

    Guruswamy, Guru P.; Kwak, Dochan (Technical Monitor)

    2002-01-01

    Multidisciplinary optimization is a key element of design process. To date multidiscipline optimization methods that use low fidelity methods are well advanced. Optimization methods based on simple linear aerodynamic equations and plate structural equations have been applied to complex aerospace configurations. However, use of high fidelity methods such as the Euler/ Navier-Stokes for fluids and 3-D (three dimensional) finite elements for structures has begun recently. As an activity of Multidiscipline Design Optimization Technical Committee (MDO TC) of AIAA (American Institute of Aeronautics and Astronautics), an effort was initiated to assess the status of the use of high fidelity methods in multidisciplinary optimization. Contributions were solicited through the members MDO TC committee. This paper provides a summary of that survey.

  13. Atmospheric Profiling Snthetic observation System(APSOS) - a system for whole atmosphere, purpose and preliminary observation

    NASA Astrophysics Data System (ADS)

    Lu, Daren; Pan, Weilin; Wang, Yinan

    2016-07-01

    To understand the vertical coupling processes between the troposphere, stratosphere, mesosphere and lower thermosphere with high vertical resolution and temporal resolution, an observation system consisted of multi-lidars, a W-band Doppler radar, and a THz spectrometer has been developing starting from 2012. This system is developed to observer the multiple atmospheric parameters, include high clouds, aerosols, CO2, SO2, NO2, water vapor, ozone, atmospheric temperature and wind, sodium atomic layer, in different height ranges, with vertical resolution of tens to hundreds meters and temporal resolution of several to tens minutes. In addition, the simultaneous observation with high cloud radar will enhance the ability of quantitative retrieval of middle and upper atmospheric observation with combined retrieval of cloud micro-physical characteristics and other atmospheric parameters above the cloud layer. As the cirrus cloud occupied about 50% of earth coverage, this ability will increase the whole atmosphere observation ability obviously. During last 5 years. We have finished each unit of the system and have revealed their targets separately. Temperature profile has been observed from 30 to 110 km, ozone up to 50 km, etc. In spring of 2016, we will have preliminary integrated observation in Eastern China, the Huainan Observatory of the Institute of Atmospheric Physics, CAS. In the end of 2016, the system will be implemented at Yangbajing Cosmic Ray Observatory, CAS, near Lasa, Tibetan Plateau. Some preliminary results from Huainan observation will be presented in this presentation. This project is founded by NSFC.

  14. Annual survey of spaceflight safety systems - 10th supplement /Survey period: July 1979-June 1980/

    NASA Technical Reports Server (NTRS)

    Brown, N. E.; Brown, J. W.

    1980-01-01

    The survey summarizes 15 papers whose topics represent significant safety developments reported between July 1979 and June 1980 in connection with spaceflight. The majority of the papers address the Space Shuttle mission (control-system software modification; abort procedures; Vandenberg AFB launch operations; assembly and repair of the Orbiter's Thermal Protection System; flight hardware). One paper describes a procedure aiding Space Transportation System (STS) payload organizations in complying with safety requirements established by NASA. Spacecraft cabin environments, collision avoidance in near-earth space, and intercept and rendezvous charts are other topics of discussion. The survey also includes two papers outlining the European and Chinese approaches to astronaut selection and training.

  15. Alternaria toxins in wheat from the Autonomous Province of Vojvodina, Serbia: a preliminary survey.

    PubMed

    Janić Hajnal, Elizabet; Orčić, Dejan; Torbica, Aleksandra; Kos, Jovana; Mastilović, Jasna; Škrinjar, Marija

    2015-01-01

    Although Fusarium species remain a main source of mycotoxin contamination of wheat, in recent years, due to the evident climatic changes, other mycotoxigenic fungi have been recognised as important wheat contaminants. Alternaria species, especially A. alternata, have been found as contaminants of wheat as well as wheat-based products. Under favourable conditions A. alternata very often produce alternariol (AOH), alternariol monomethyl ether (AME), tenuazonic acid (TeA) and others Alternaria toxins. The aim of the present study was to examine the presence of three Alternaria toxins (AOH, AME and TeA) in wheat samples harvested during three years (2011-13). To this end, 92 samples were collected during wheat harvesting from different growing regions of the Autonomous Province of Vojvodina, which represents the most important wheat-growing area in Serbia. The presence of Alternaria toxins was analysed by HPLC with electrospray ionisation triple quadrupole mass spectrometry (LC-ESI-MS/MS). Among all the analysed wheat samples, 63 (68.5%) were contaminated with TeA, 11 (12.0%) with AOH and 6 (6.5%) with AME. Furthermore, the maximum and mean toxin concentrations were 2676 and 92.4 µg kg(-1), 48.9 and 18.6 µg kg(-1), and 70.2 and 39.0 µg kg(-1) for TeA, AOH and AME, respectively. Co-occurrence of three Alternaria toxins in wheat samples was detected in six samples; a combination of two toxins was found in two samples; and 64 samples contained one toxin. The results showed that among 92 analysed wheat samples, only 20 (21.7%) samples were without Alternaria toxins. The presence of Alternaria toxins was also investigated in terms of weather conditions recorded during the period of investigation, as well as with the sampling region. This study represents the first preliminary report of the natural occurrence of Alternaria toxins in wheat (Triticum aestivum) from Serbia. PMID:25585540

  16. Coastal Survey Using Unmanned Aerial Systems

    NASA Astrophysics Data System (ADS)

    Walker, G.

    2012-12-01

    Generating high-resolution 3-dimensional costal imagery from imagery collected on small-unmanned aircraft is opening many opportunities to study marine wildlife and its use of costal habitats as well as climate change effects on northern coasts where storm surges are radically altering the coastline. Additionally, the technology is being evaluated for oil spill response planning and preparation. The University of Alaska Fairbanks works extensively with small-unmanned aircraft and recently began evaluating the aircraft utility for generating survey grade mapping of topographic features. When generating 3-D maps of coastal regions however there are added challenges that the University have identified and are trying to address. Recent projects with Alaska fisheries and BP Exploration Alaska have demonstrated that small-unmanned aircraft can support the generation of map-based products that are nearly impossible to generate with other technologies.

  17. Preliminary amphibian health survey in the Delaware Water Gap National Recreation Area.

    PubMed

    Glenney, Gavin W; Julian, James T; Quartz, William M

    2010-06-01

    To detect aquatic animal diseases of national concern, 111 individual amphibians, including wood frogs Rana sylvatica (28), spring peepers Pseudacris crucifer (35), red-spotted newts Notophthalmus viridescens (41), and gray tree frogs Hyla versicolor (7), were sampled at seven different sites in the Delaware Water Gap National Recreation Area (DGNRA), Pennsylvania, from June 14 to July 19, 2007. These samples were screened for Batrachochytrium dendrobatidis and viral pathogens at the U.S. Fish and Wildlife Service's Fish Health Center in Lamar, Pennsylvania. Cell culture revealed cytopathic effect (CPE) in two cell lines (epithelioma papillosum cyprini and fathead minnow) inoculated with liver, kidney, and spleen samples from one sample pool of Notophthalmus viridescens (4 individuals). Polymerase chain reaction was conducted on cell culture supernatant exhibiting CPE. Sequencing revealed the resulting product to be identical to frog virus 3, a ranavirus in the family Iridoviridae. Upon gross examination, two Notophthalmus viridescens were found to exhibit dermal swelling and lethargy. Histological examination of these lesions revealed involvement by an Ichthyophonus sp. In summary, two pathogens of concern were found in amphibians in the DGNRA: a ranavirus with a major capsid protein sequence identical to that of frog virus 3 and a mesomycetozoan, Ichthyophonus sp. Although no epizootic die-offs were observed during this health survey, the results warrant further research into the distribution of these pathogens throughout the DGNRA because they have the potential to cause mass mortalities in amphibians. PMID:20848885

  18. Hydatidiform mole in China: a preliminary survey of incidence on more than three million women

    PubMed Central

    Hong-Zhao, Song; Pao-Chen, Wu

    1987-01-01

    A nationwide retrospective survey to determine the incidence of hydatidiform mole has been conducted in China since 1979 by inquiring into the history of past pregnancies. Up to the end of 1983, a total of 3 089 399 women with 10 929 354 pregnancies from 26 provinces, special municipalities and autonomous regions had been investigated. The overall incidence was one mole in 1238 pregnancies (0.81 per 1000 pregnancies). The incidence was higher in five provinces of south-east China than in other parts of the country and higher among the coastal people than inlanders. Ethnic comparisons were made between the major Han and three main minority groups. The incidence was higher among the Zhuang in Guangxi and the Mongolians in Inner Mongolia than among the Han living in the same areas. However, in Ningxia, the incidence among the Hui (Muslims) was almost the same as that of the Han. There was no significant difference in the incidence of hydatidiform mole between urban and rural residents. The traditional view that hydatidiform mole occurs much more frequently among women in China and other Asian countries has to be revised. The present study shows that the incidence in China is higher than that among Caucasian women in some European countries, but it is by no means as high as previously believed. PMID:3500804

  19. Oral cancer in Myanmar: a preliminary survey based on hospital-based cancer registries.

    PubMed

    Oo, Htun Naing; Myint, Yi Yi; Maung, Chan Nyein; Oo, Phyu Sin; Cheng, Jun; Maruyama, Satoshi; Yamazaki, Manabu; Yagi, Minoru; Sawair, Faleh A; Saku, Takashi

    2011-01-01

    The occurrence of oral cancer is not clearly known in Myanmar, where betel quid chewing habits are widely spread. Since betel quid chewing has been considered to be one of the important causative factors for oral cancer, the circumstantial situation for oral cancer should be investigated in this country. We surveyed oral cancer cases as well as whole body cancers from two cancer registries from Yangon and Mandalay cities, both of which have representative referral hospitals in Myanmar, and we showed that oral cancer stood at the 6th position in males and 10th in females, contributing to 3.5% of whole body cancers. There was a male predominance with a ratio of 2.1:1. Their most frequent site was the tongue, followed by the palate, which was different from that in other countries with betel quid chewing habits. About 90% of male and 44% of female patients had habitual backgrounds of chewing and smoking for more than 15 years. The results revealed for the first time reliable oral cancer frequencies in Myanmar, suggesting that longstanding chewing and smoking habits are etiological backgrounds for oral cancer patients. PMID:20819123

  20. Preliminary analysis of gravity and aeromagnetic surveys of the Timber Mountain Area, southern Nevada

    SciTech Connect

    Kane, M.F.; Webring, M.W.; Bhattacharyya, B.K.

    1981-12-31

    Recent (1977 to 1978) gravity and aeromagnetic surveys of the Timber Mountain region, southern Nevada, have revealed new details of subsurface structure and lithology. The data strongly suggest that deformation caused by volcanic events has been accommodated along straight-line faults combining in such a fashion as to given a curvilinear appearance to regional structure. The magnetic data suggest that rock units in the central graben and along the southeast margin of Timber Mountain may have been altered, perhaps thermally, from their original state. The gravity data indicate that the south part of the Timber Mountain is underlain by relatively dense rock possibly intrusive rock, like that which crops out along its southeast side. The gravity data also suggest that the Silent Canyon caldera may extend considerably south of its presently indicated southern limit and may underlie much of the area of Timber Mountain. The moat areas appear to be more rectangular or triangular than annular in shape. The southern part of Timber Mountain caldera is separated from the Yucca Mountain area to the south by a triangular horst. The structural relations of the rock units making up the horst are complex. Several linear terrain features in the southern part of the caldera area are closely aligned with geophysical features, implying that the terrain features are fault-controlled.

  1. Preliminary survey report: control technology for the ceramics industry at American Standard Corporation, Wauregan, Connecticut

    SciTech Connect

    Godbey, F.W.

    1983-01-01

    Health-hazard control methods, work processes, and existing control technology used in the manufacture of vitreous-china plumbing fixtures were surveyed at American Standard Corporation Wauregan, Connecticut in July, 1982. The company employed 400 workers in the production of plumbing fixtures from ball and china clays, flint, and feldspar. Raw materials were received already ground to production specifications, and were blended with water to produce slip. The slip was pumped to vibrating shaker screens, classified, then transported to the casting bench where it was poured into plastic molds and allowed to harden. After fettling, the finished cast was dried for 24 hours, glazed, and fired at 2300/sup 0/-F for 24 hours. The finished product was inspected, packed, and shipped to the customer. The Division Safety Director performed periodic health and safety inspections as well as environmental sampling and worker training. Employees were provided with safety shoes, safety glasses, ear protectors, and respirators. Local exhaust ventilation was provided in the silo discharge area, finishing area, glaze spray booths, and repair area. The author does not recommend an in-depth study of the company since there is no raw-material crushing and grinding operation.

  2. Preliminary summary of the 1976 Atlantic Margin Coring Project of the U.S. Geological Survey

    USGS Publications Warehouse

    Hathaway, John Cummins; Schlee, J.J.; Poag, C.W.; Valentine, P.C.; Weed, E.G.A.; Bothner, Michael H.; Kohout, F.A.; Manheim, F. T.; Schloam, R.; Miller, R.E.; Schultz, D.M.

    1976-01-01

    The U.S. Geological Survey Atlantic Margin Coring Project, 1976, a 60-day expedition to obtain core samples by drilling beneath the floor of the Continental Shelf and Slope of the eastern United States, was carried out in July, August, and September 1976 aboard D/V GLOMAR CONCEPTION. The coring penetrated as much as 310 meters below the sea floor at 19 sites along the continental margin from Georgia to Georges Bank off New England in water depths ranging from 20 to 300 meters; 1,020 meters of material were recovered in 380 cores, ranging in age from Late Cretaceous to Holocene. One of the major findings was the discovery of relatively fresh water (salinities less than 3 parts per thousand) extending beneath the Continental Shelf as much as 60 nautical miles seaward from the New Jersey coast. Water of about 1 part per thousand salinity was found beneath the shelf more than 7 nautical miles off Ocean City, Maryland and Barnegat Inlet, New Jersey. Analyses for light hydrocarbons in the cores show the highest concentrations (as much as 412,000 ppm) at sites in water depth greater than 200 meters (the shelf-slope break), principally in Pleistocene sediments, although methane concentrations greater than 400,000 ppm also were found in Miocene sediments at one site near the shelf edge. (Woodard-USGS)

  3. Report on a preliminary survey by the WHO Bilharziasis Advisory Team in Upper Volta

    PubMed Central

    McMullen, Donald B.; Francotte, Jean

    1962-01-01

    The WHO Bilharziasis Advisory Team made a survey in Upper Volta during May and June 1960. Data available indicate that S. haematobium is widely scattered throughout the country and that about 50% of the population, or more than 1.5 million people, are infected at some time during their lives. The examination of faeces is not a common practice, and it is therefore impossible to estimate the prevalence of S. mansoni and the intestinal helminths. The available evidence indicates, however, that S. mansoni is more prevalent in the country than is generally suspected. The distribution of the known snail habitats and the bilharziasis foci indicate that most of the major watersheds are infested, but that transmission sites may be rather sharply defined. It will be necessary to take this and various seasonal factors into consideration in planning a bilharziasis control programme. An analysis of the various public health problems in the country indicated that a programme of bilharziasis control would not be of practical value unless it was combined with a general attack on filth- and vector-borne diseases, and that it was essential to consider such a programme in conneixon with plans for the development of water and soil resources. PMID:20604120

  4. Survey and Alignment of the Fermilab Electron Cooling System

    SciTech Connect

    Oshinowo, Babatunde O'Sheg; Leibfritz, Jerry

    2006-09-01

    The goal of achieving the Tevatron luminosity of 3 x 10{sup 32} cm{sup -2}s{sup -1} requires Electron Cooling in the Recycler Ring to provide an increased flux of antiprotons. The Fermilab Electron Cooling system has been designed to assist accumulation of antiprotons for the Tevatron collider operations. The installation along with the survey and alignment of the Electron Cooling system in the Recycler Ring were completed in November 2004. The Electron Cooling system was fully commissioned in May 2005 and the first cooling of antiprotons was achieved in July 2005. This paper discusses the alignment methodology employed to survey and align the Electron Cooling system.

  5. The use of fluoxetine by veterinarians in dogs and cats: a preliminary survey

    PubMed Central

    Kaur, Gagandeep; Voith, Victoria L.; Schmidt, Peggy L.

    2016-01-01

    Objective To describe the prescribing habits of a sample of small animal veterinarians pertaining to use of fluoxetine in dogs and cats. Design Exploratory descriptive survey using a questionnaire, available on paper and through email, distributed to small animal veterinarians by convenience sampling. Participants Veterinarians practicing small animal medicine in North America contacted by email and at local veterinary meetings. Results Of 127 initial respondents, 106 prescribed fluoxetine for dogs and/or cats. The majority (91 per cent) indicated the drug be given once every 24 hours. Respondents used one or more formulations of fluoxetine. Of those who prescribed fluoxetine for both dogs and cats (57 per cent), 80 per cent used a generic form. A third prescribed fluoxetine only for dogs (31 per cent) and 72 per cent of these prescribed the US Food and Drug Administration approved product that was available at that time. The primary use of fluoxetine was related to behaviour problems. Overall for dogs, uses of fluoxetine were organised into five major categories by the investigators: Anxieties, Aggression, Compulsive Disorders, Phobias/Fear and Other, Anxieties being the most common. Of those who prescribed fluoxetine, 12 per cent did so only for cats and the majority of these prescribed generic (58 per cent) and or compounded (42 per cent) forms. Overall for cats, uses of fluoxetine were organised into six major categories: Elimination behaviours, Anxieties, Aggression, Dermatologic/Grooming, Compulsive Disorders and Other, Elimination behaviours being most common. Conclusions This study indicates that practitioners prescribed fluoxetine in generic, proprietary and compounded formulations for a variety of behaviour problems of dogs and cats. The broad use by the respondents suggests how important psychotropic drugs are in veterinary medicine. Research, information and continuing education regarding such drugs and animal behaviour should be made available to the

  6. A Survey on Distributed File System Technology

    NASA Astrophysics Data System (ADS)

    Blomer, J.

    2015-05-01

    Distributed file systems provide a fundamental abstraction to location-transparent, permanent storage. They allow distributed processes to co-operate on hierarchically organized data beyond the life-time of each individual process. The great power of the file system interface lies in the fact that applications do not need to be modified in order to use distributed storage. On the other hand, the general and simple file system interface makes it notoriously difficult for a distributed file system to perform well under a variety of different workloads. This has lead to today's landscape with a number of popular distributed file systems, each tailored to a specific use case. Early distributed file systems merely execute file system calls on a remote server, which limits scalability and resilience to failures. Such limitations have been greatly reduced by modern techniques such as distributed hash tables, content-addressable storage, distributed consensus algorithms, or erasure codes. In the light of upcoming scientific data volumes at the exabyte scale, two trends are emerging. First, the previously monolithic design of distributed file systems is decomposed into services that independently provide a hierarchical namespace, data access, and distributed coordination. Secondly, the segregation of storage and computing resources yields to a storage architecture in which every compute node also participates in providing persistent storage.

  7. Preliminary design of a satellite observation system for Space Station Freedom

    NASA Technical Reports Server (NTRS)

    Cabe, Greg (Editor); Gallagher, Chris; Wilson, Brian; Rehfeld, James; Maurer, Alexa; Stern, Dan; Nualart, Jaime; Le, Xuan-Trang

    1992-01-01

    Degobah Satellite Systems (DSS), in cooperation with the University Space Research Association (USRA), NASA - Johnson Space Center (JSC), and the University of Texas, has completed the preliminary design of a satellite system to provide inexpensive on-demand video images of all or any portion of Space Station Freedom (SSF). DSS has narrowed the scope of the project to complement the work done by Mr. Dennis Wells at Johnson Space Center. This three month project has resulted in completion of the preliminary design of AERCAM, the Autonomous Extravehicular Robotic Camera, detailed in this design report. This report begins by providing information on the project background, describing the mission objectives, constraints, and assumptions. Preliminary designs for the primary concept and satellite subsystems are then discussed in detail. Included in the technical portion of the report are detailed descriptions of an advanced imaging system and docking and safing systems that ensure compatibility with the SSF. The report concludes by describing management procedures and project costs.

  8. Preliminary results for an aeromagnetic survey flown over Italy using the HALO (High Altitude and LOng range) research aircraft

    NASA Astrophysics Data System (ADS)

    Lesur, V.; Schachtschneider, R.; Gebler, A.

    2013-12-01

    In June 2012 the GEOHALO mission was flown over Italy using the high altitude and long-range German research aircraft HALO (Gulfstream jet - G550). One goal of the mission was to demonstrate the feasibility of using geodetic and geophysical instrumentation on such fast flying aircraft. The magnetic data were collected through two independent acquisition chains placed inside under-wing containers. Each chain included a total intensity cesium magnetometer, a three-component fluxgate magnetometer, several temperature censors and a digitizer. Seven parallel profiles, each around 1000 km long, were flown over the Apennine peninsula from north-west to south-east. The flight altitude was about 3500 m and the survey line spacing around 40 km. These long profiles were complemented by four crossing profiles, and a repeated flight line at a higher altitude (approx. 10500 m). The measured magnetic data appear to be consistent with the expected signal. Here we present preliminary results of the data processing. From the calibration maneuvers we have been able to correct the data for most of the plane generated signal. High frequency noise, probably associated with the plane engines, has been filtered out. Along profile data are compared with the Italian aeromagnetic grid as provided by the last version of the WDMAM (World Digital Magnetic Anomaly Map).

  9. Preliminary survey of polychlorinated biphenyls (PCBs) in aquatic habitats and Great Blue Herons on the Hanford Site. [Ardea herodias

    SciTech Connect

    Riley, R.G.; Bean, R.M.; Fitzner, R.E.; Neitzel, D.A.; Rickard, W.H.

    1986-01-01

    Polychlorinated biphenyls (PCBs), constituents of insulating fluids used in electrical transformers and capacitors, were identified during a preliminary survey of waters, sediments, and fish from five locations on the Hanford Site in southeastern Washington State: Gable Mountain Pond, B Pond, West Pond, White Bluffs Slough on the Columbia River, and a pond on the Wahluke Slope. These aquatic areas are all within the foraging range of great blue herons (Ardea herodias) that nest on the Hanford Site. Of those waters that contained PCBs, concentrations were found to be somewhat over 1 ng/L, but less than 20 ng/L, and equal to or less than concentrations reported for other freshwater regions of the United States. The PCBs in sediments and fish closely resembled the chromatographic profile of Aroclor 1260, a commercial PCB mixture produced in the United States by the Monsanto Company. Concentrations of PCBs detected in the sediments were 10 to 100 times lower than those found in soils and sediments from other areas of the nation. Concentrations of PCBs in fat from Hanford great blue herons ranged from 3.6 to 10.6 ppM, while PCB concentrations in herons from other areas of the Pacific Northwest ranged from 0.6 to 15.6 ppM. Great blue herons at Hanford contained PCB isomer distributions closely matching that of Aroclor 1260; great blue herons from other locations contained isomer distributions indicating the presence of a mixture of aroclors. 21 refs., 13 figs., 8 tabs.

  10. A preliminary disease survey in the wild Nile crocodile (Crocodylus niloticus) population in the Okavango Delta, Botswana.

    PubMed

    Leslie, A J; Lovely, C J; Pittman, J M

    2011-09-01

    The objective of this study was to conduct a preliminary survey of diseases that might be present in the wild Nile crocodile population in the Okavango Delta, Botswana. Blood samples were collected from crocodiles ranging in size from 34.0 cm to 463.0 cm total length. Samples were examined for blood parasites and underwent a haematological analysis. Before release the crocodiles were examined for various clinical abnormalities. Of the 144 crocodiles examined, none were visibly sick or displayed any signs of disease. No antibodies to Mycoplasma crocodyli were detected. Hepatozoon pettiti was present in 55.3% of blood smears examined, but there was no significant difference in any of the haematological values between the infected and uninfected crocodiles, and a high prevalence of Hepatozoon infection is not uncommon in other species. Only 7.6% of the examined crocodiles were infested with leeches. Further research is required for several of the crocodilian diseases, in particular to elucidate the role of wild crocodilians as reservoirs of infection. PMID:22332299

  11. Design, implementation and preliminary evaluation of a telemedicine system for home haemodialysis.

    PubMed

    Skiadas, Marios; Agroyiannis, Basil; Carson, Ewart; Cramp, Derek; Fourtounas, Costas; Darnige, Ann; Morgan, Alastair; Murley, David; Tsavdaris, Harry; Hassomeris, Costas; Skouras, Costas

    2002-01-01

    A telemedicine system for home haemodialysis was designed using a systems approach and a feedback model to produce the hardware and software specifications. Preliminary clinical trials at four European locations involved 29 patients and 305 sessions of haemodialysis. The evaluation included an evaluability assessment and formative evaluation. Central to the methodology was the detailed specification of a stakeholder/evaluation criterion matrix. Preliminary results indicated that the telemedicine system was capable of satisfying the requirements of formative evaluation as a precursor to evaluating its overall worth. PMID:12097177

  12. a Goes-W Satellite Thermal Infrared Survey (2006-2014) Over South Western us Earthquake Prone Area: Preliminary Results on 24 August 2014 Napa Earthquake (M=6)

    NASA Astrophysics Data System (ADS)

    Tramutoli, V.; Genzano, N.; Coviello, I.; Filizzola, C.; Lisi, M.; Paciello, R.; Pergola, N.; Satriano, V.

    2014-12-01

    The RST (Robust Satellite Technique) methodology has been widely applied to tens of earthquakes occurred in different continents (Europe, Asia, America and Africa), in various geo-tectonic settings (compressive, extensional and transcurrent) and with a wide range of magnitudes (from 4.0 to 7.9) trying to identify anomalous fluctuations of the Earth's emitted TIR (Thermal InfraRed) radiation in possible relation with earthquake occurrence discriminating them from those variations due to other causes. An extended study is presented in the AGU2014 NH008 session by Tramutoli et al. which is devoted to verify to which extent Significant (space-time persistent, non-spurious) Sequences of TIR Anomalies (SSTAs) appear within prefixed space-time windows around earthquakes of magnitude M>4 occurred on 6 years (2006-2011) over South Western US seismic area. Results of such a study (with a rate of false positive of 35%) give an idea on the possible relevance of RST based TIR surveys in the framework of an operational, multi-parametric system for time-Dependent Assessment of Seismic Hazard (t-DASH). In this paper all the data available from the new GOES-W satellite (in orbit in between 2010 and 2014) have been analysed by the same way in the case of the earthquake occurred on 24 August 2014 (M=6) over Napa valley (California). The results presented in this paper, even if still preliminary, seem to confirm the significance of RST based TIR survey in a t-DASH perspective. It should however mentioned, that such an approach (even if not devoted to be used for short-term Earthquake Forecast outside a multiparametric t-DASH system), when compared with whatever traditional OEF (Operational Earthquake Forecast) method (like the one abandoned ten years ago in US but recently re-proposed for Italy) seems already to gives forecast reliabilities of orders of magnitude greater.

  13. Information survey for microcomputer systems integration

    SciTech Connect

    Hake, K.A.

    1991-12-01

    One goal of the PM-AIM is to provide US Army Project Managers (PMs) and Project Executive Officers (PEOs) with a fundamental microcomputing resource to help perform acquisition information management and its concomitant reporting requirements. Providing key application software represents one means of accomplishing this goal. This workstation would furnish a broad range of capabilities needed in the PM and PEO office settings as well as software tools for specific project management and acquisition information. Although still in the conceptual phase, the practical result of this exercise in systems integration will likely be a system called the Project Manager's Information System (PMIS) or the AIM workstation. It would include such software as, Project Manager's System Software (PMSS), Defense Acquisition Executive Summary (DAES), and Consolidated Acquisition Reporting System (CARS) and would conform to open systems architecture as accepted by the Department of Defense. ORNL has assisted PM-AIM in the development of technology ideas for the PMIS workstation concept. This paper represents the compilation of information gained during this process. This information is presented as a body of knowledge (or knowledge domain) defining the complex technology of microcomputing. The concept of systems integration or tying together all hardware and software components reflects the nature of PM-AIM's task in attempting to field a PMIS or AIM workstation.

  14. Information survey for microcomputer systems integration

    SciTech Connect

    Hake, K.A.

    1991-12-01

    One goal of the PM-AIM is to provide US Army Project Managers (PMs) and Project Executive Officers (PEOs) with a fundamental microcomputing resource to help perform acquisition information management and its concomitant reporting requirements. Providing key application software represents one means of accomplishing this goal. This workstation would furnish a broad range of capabilities needed in the PM and PEO office settings as well as software tools for specific project management and acquisition information. Although still in the conceptual phase, the practical result of this exercise in systems integration will likely be a system called the Project Manager`s Information System (PMIS) or the AIM workstation. It would include such software as, Project Manager`s System Software (PMSS), Defense Acquisition Executive Summary (DAES), and Consolidated Acquisition Reporting System (CARS) and would conform to open systems architecture as accepted by the Department of Defense. ORNL has assisted PM-AIM in the development of technology ideas for the PMIS workstation concept. This paper represents the compilation of information gained during this process. This information is presented as a body of knowledge (or knowledge domain) defining the complex technology of microcomputing. The concept of systems integration or tying together all hardware and software components reflects the nature of PM-AIM`s task in attempting to field a PMIS or AIM workstation.

  15. Survey of Library and Information Manpower Needs in the Caribbean. (Preliminary Version).

    ERIC Educational Resources Information Center

    Moore, Nick

    In order to provide a base for national information planning and the restructuring of existing training institutions, a detailed study was conducted of manpower needs--at professional, paraprofessional, and technician levels--for information systems and services in the Caribbean region. A paper setting out the basic principles underlying manpower…

  16. The Reten-World survey of the management of acute urinary retention: preliminary results.

    PubMed

    Emberton, Mark; Fitzpatrick, John M

    2008-03-01

    Acute urinary retention (AUR) is a urological emergency characterized by a sudden and painful inability to pass urine. It represents a significant worldwide public health issue, as mortality within the year following an AUR episode appears much higher than in the general population, especially in younger patients. Management of AUR involves immediate bladder catheterization usually followed, until recently, by prostatic surgery. The greater morbidity and mortality associated with emergency surgery (within a few days after AUR), and the potential morbidity associated with prolonged catheterization (bacteriuria, fever, urosepsis) has led to an increasing use of a trial without catheter (TWOC). TWOC involves catheter removal after 1-3 days, allowing 23-40% of patients to void successfully, so that surgery can be performed at a later stage, if needed. Use of an alpha(1)-blocker before a TWOC may also be of help, as it has been demonstrated that it increases the chances of successful voiding after catheter removal. In the UK, this TWOC policy has resulted in a progressive decrease in the number of surgical procedures following a first episode of AUR, with the detriment of a slight increase in the AUR recurrence rate. Currently, there is no consensus on the optimal management of AUR in terms of type of catheterization, duration of catheterization and management following catheterization. The Reten-World survey is aimed at assessing current practice in the management of AUR in France, Asia, Latin America, North Africa and the Middle East. Interim results based on 3785 men with AUR associated with benign prostatic hyperplasia show that a urethral catheter is inserted in most cases (87%). Following this initial step, a TWOC after a median of 3 days' catheterization has become standard practice worldwide, with only a minority of men (6%) undergoing immediate surgery. Treatment with an alpha(1)-blocker before a TWOC improves the chances of success, regardless of the duration

  17. A Seismic Reflection Profiling Survey of Lake Toba, Sumatra, Indonesia: Preliminary Findings from the Field

    NASA Astrophysics Data System (ADS)

    Chesner, C. A.; Dolan, M. T.; Halsor, S. P.; Bohnenstiehl, D. R.; Liu, J.; Nasution, A.

    2012-12-01

    Lake Toba lies within the giant Toba Caldera that last erupted 74,000 years ago. In its early history, Lake Toba may have covered about 1800 km2, possibly reaching depths of 750 m. The central portion of the 100 x 30 km caldera has since been uplifted to form the asymmetrical Samosir Island resurgent dome (60 x 20 km). Its upper surface dips gently to the west while its eastern margin consists of a series of parallel normal faults with total displacement of at least 1100 m. Several lava domes have been emplaced along these faults as well as the southwestern caldera ring fracture. At least 30 m of laminated tuffaceous sand and silt, diatomaceous clay, diatomites, and volcanic ash cover Samosir Island and sediments up to 100 m have been reported. In an effort to understand the post-collapse sedimentation, structural, volcanic, and resurgent histories of the caldera, we conducted a 14 day seismic reflection profiling survey of Lake Toba in July/August 2012. An EdgeTech SB-512i "chirp" sonar unit was towed across about 900 km of transect lines. Signal penetration was not affected by water depth, which sometimes exceeded 500 m, but was often reduced by adverse tow conditions or strong stratigraphic reflectors, and occasionally lost altogether possibly due to gas pockets in the sediments. In areas of flat-lying or gently sloping lake bottom, about 10-30 m of lake sediments was typically detected. Along the steep caldera bounding faults and the faulted eastern margin of the Samosir resurgent dome virtually no sediments were detected. However, up to 90 m of laminated sediments were apparent on the crest and gently sloping submerged portions of Samosir. These thick sedimentary sequences showed distinct marker horizons with evidence of faulting, folding, sliding, and slumping. Local unconformities or onlapping sequences demonstrated discrete sedimentary episodes. Several subaqueous lava domes were discovered that uplifted, folded, and sometimes truncated the sedimentary

  18. A survey of advanced battery systems for space applications

    NASA Technical Reports Server (NTRS)

    Attia, Alan I.

    1989-01-01

    The results of a survey on advanced secondary battery systems for space applications are presented. Fifty-five battery experts from government, industry and universities participated in the survey by providing their opinions on the use of several battery types for six space missions, and their predictions of likely technological advances that would impact the development of these batteries. The results of the survey predict that only four battery types are likely to exceed a specific energy of 150 Wh/kg and meet the safety and reliability requirements for space applications within the next 15 years.

  19. Survey of Software Assurance Techniques for Highly Reliable Systems

    NASA Technical Reports Server (NTRS)

    Nelson, Stacy

    2004-01-01

    This document provides a survey of software assurance techniques for highly reliable systems including a discussion of relevant safety standards for various industries in the United States and Europe, as well as examples of methods used during software development projects. It contains one section for each industry surveyed: Aerospace, Defense, Nuclear Power, Medical Devices and Transportation. Each section provides an overview of applicable standards and examples of a mission or software development project, software assurance techniques used and reliability achieved.

  20. Preliminary survey of 21st century civil mission applications of space nuclear power

    NASA Technical Reports Server (NTRS)

    Mankins, John C.; Olivieri, J.; Hepenstal, A.

    1987-01-01

    The purpose was to collect and categorize a forecast of civilian space missions and their power requirements, and to assess the suitability of an SP-100 class space reactor power system to those missions. A wide variety of missions were selected for examination. The applicability of an SP-100 type of nuclear power system was assessed for each of the selected missions; a strawman nuclear power system configuration was drawn up for each mission. The main conclusions are as follows: (1) Space nuclear power in the 50 kW sub e plus range can enhance or enable a wide variety of ambitious civil space mission; (2) Safety issues require additional analyses for some applications; (3) Safe space nuclear reactor disposal is an issue for some applications; (4) The current baseline SP-100 conical radiator configuration is not applicable in all cases; (5) Several applications will require shielding greater than that provided by the baseline shadow-shield; and (6) Long duration, continuous operation, high reliability missions may exceed the currently designed SP-100 lifetime capabilities.

  1. Preliminary survey of 21st century civil mission applications of space nuclear power

    NASA Astrophysics Data System (ADS)

    Mankins, John C.; Olivieri, J.; Hepenstal, A.

    1987-03-01

    The purpose was to collect and categorize a forecast of civilian space missions and their power requirements, and to assess the suitability of an SP-100 class space reactor power system to those missions. A wide variety of missions were selected for examination. The applicability of an SP-100 type of nuclear power system was assessed for each of the selected missions; a strawman nuclear power system configuration was drawn up for each mission. The main conclusions are as follows: (1) Space nuclear power in the 50 kW sub e plus range can enhance or enable a wide variety of ambitious civil space mission; (2) Safety issues require additional analyses for some applications; (3) Safe space nuclear reactor disposal is an issue for some applications; (4) The current baseline SP-100 conical radiator configuration is not applicable in all cases; (5) Several applications will require shielding greater than that provided by the baseline shadow-shield; and (6) Long duration, continuous operation, high reliability missions may exceed the currently designed SP-100 lifetime capabilities.

  2. PRELIMINARY ASSESSMENT OF THE USE OF HEAT TRANSFER FLUIDS FOR SOLAR THERMAL ENERGY SYSTEMS

    EPA Science Inventory

    The report contains a preliminary assessment, based on available data, of the extent to which various materials will be used as heat transfer media in solar energy systems and of mechanisms for their release to the environment. The emphasis is on solar thermal energy systems for ...

  3. Preliminary Findings on Searcher Performance and Perceptions of Performance in a Hypertext Bibliographic Retrieval System.

    ERIC Educational Resources Information Center

    Wolfram, Dietmar; Dimitroff, Alexandra

    1997-01-01

    Although hypertext system usage has been studied, little research has examined the relationship of searcher performance and perception of performance, particularly for hypertext-based information retrieval systems for bibliographic data. This article reports preliminary findings of a study at the University of Wisconsin-Milwaukee in which 83…

  4. Satellite Power Systems (SPS): Concept development and evaluation program: Preliminary assessment

    NASA Technical Reports Server (NTRS)

    1979-01-01

    A preliminary assessment of a potential Satellite Power System (SPS) is provided. The assessment includes discussion of technical and economic feasibility; the effects of microwave power transmission beams on biological, ecological, and electromagnetic systems; the impact of SPS construction, deployment, and operations on the biosphere and on society; and the merits of SPS compared to other future energy alternatives.

  5. Auxiliary payload power system study for space processing applications payloads. Preliminary requirements study

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The preliminary designs, specifications, and programmatic data for the auxiliary payload power system (APPS) are presented. The APPS concept is an independent system to be carried in the Orbiter's cargo bay having the capability of housing and supporting space processing applications (SPA) experiment payloads and augmenting Spacelab power and heat rejection capabilities as required in the performance of these experiments.

  6. INERTIAL INSTRUMENT SYSTEM FOR AERIAL SURVEYING.

    USGS Publications Warehouse

    Brown, Russell H.; Chapman, William H.; Hanna, William F.; Mongan, Charles E.; Hursh, John W.

    1987-01-01

    The purpose of this report is to describe an inertial guidance or navigation system that will enable use of relatively light aircraft for efficient data-gathering in geologgy, hydrology, terrain mapping, and gravity-field mapping. The instrument system capitalizes not only on virtual state-of-the-art inertial guidance technology but also on similarly advanced technology for measuring distance with electromagnetic radiating devices. The distance measurement can be made with a transceiver beamed at either a cooperative taget, with a specially designed reflecting surface, or a noncooperative target, such as the Earth's surface. The instrument system features components that use both techniques. Thus, a laser tracker device, which updates the inertial guidance unit or navigator in flight, makes distance measurements to a retroreflector target mounted at a ground-control point; a laser profiler device, beamed vertically downward, makes distance measurements to the Earth's surface along a path that roughly mirrors the aircraft flight path.

  7. SURVEY OF DRY SO2 CONTROL SYSTEMS

    EPA Science Inventory

    The report gives results of an assessment of the status of dry flue gas desulfurization (FGD) processes in the U.S. for both industrial and utility applications. The assessment is based on reviews of past and current research, development, and commercial activities. Systems cover...

  8. A system level model for preliminary design of a space propulsion solid rocket motor

    NASA Astrophysics Data System (ADS)

    Schumacher, Daniel M.

    Preliminary design of space propulsion solid rocket motors entails a combination of components and subsystems. Expert design tools exist to find near optimal performance of subsystems and components. Conversely, there is no system level preliminary design process for space propulsion solid rocket motors that is capable of synthesizing customer requirements into a high utility design for the customer. The preliminary design process for space propulsion solid rocket motors typically builds on existing designs and pursues feasible rather than the most favorable design. Classical optimization is an extremely challenging method when dealing with the complex behavior of an integrated system. The complexity and combinations of system configurations make the number of the design parameters that are traded off unreasonable when manual techniques are used. Existing multi-disciplinary optimization approaches generally address estimating ratios and correlations rather than utilizing mathematical models. The developed system level model utilizes the Genetic Algorithm to perform the necessary population searches to efficiently replace the human iterations required during a typical solid rocket motor preliminary design. This research augments, automates, and increases the fidelity of the existing preliminary design process for space propulsion solid rocket motors. The system level aspect of this preliminary design process, and the ability to synthesize space propulsion solid rocket motor requirements into a near optimal design, is achievable. The process of developing the motor performance estimate and the system level model of a space propulsion solid rocket motor is described in detail. The results of this research indicate that the model is valid for use and able to manage a very large number of variable inputs and constraints towards the pursuit of the best possible design.

  9. Preliminary Results of a Near-Bottom Integrated Seafloor and Water Column survey of Brothers volcano, Kermadec arc, Using the Autonomous Vehicle ABE

    NASA Astrophysics Data System (ADS)

    Embley, R. W.; de Ronde, C.; Davy, B.; Baker, E. T.; Resing, J. A.; Yoerger, D. R.; Merle, S. G.; Walker, S. L.

    2007-12-01

    Brothers volcano, located about 310 km NE of New Zealand along the magmatic front of the Kermadec arc, is one of the best studied intraoceanic arc submarine volcanoes. Its 3.0 x 3.5 km caldera is slightly elliptical, with the long axis oriented about N320°E and has more than 300 m relief from a rim at ~1500 m to a maximum depth of 1880 m in its NW corner. Two major hydrothermal systems were discovered on it in the late 1990s, a high temperature field (up to 302°C) on the NW wall and a lower temperature gas-rich system on the summits of a pair of dacitic cones that occupy the SE half of the caldera. Although the caldera and cones were partly explored by submersibles in 2004 and 2005, the base map, made with a surface ship multibeam, was not detailed enough to understand the context of the seafloor observations. We used the autonomous vehicle ABE launched and recovered from the R/V SONNE in July-August 2007 to conduct high resolution near-bottom surveys of the caldera and its hydrothermal systems using a multibeam sonar, magnetometer, and CTD. The caldera wall, the dacite cones and part of the flat caldera rim were mapped in 96 hours of survey time over 8 dives. In addition, very detailed water column surveys at lower altitude and closer line spacing were conducted over the two most intense hydrothermal sites (i.e., the NW caldera wall and the smaller dacite cone). Although the results are preliminary, there are obvious correlations between hydrothermal activity, wall geomorphology, structural lineations, and the magnetic signature. New hydrothermal sites were discovered on the uppermost NW rim of the caldera and on the SW wall. This new map, along with the previously collected suites of fluid, mineral and seafloor observations, provides a baseline for future monitoring of Brothers' hydrothermal and volcanic activity. It will also provide a better understanding of how the long-term interplay of hydrothermal and volcanic activity affects the geomorphic evolution of

  10. Computerized Adaptive Testing System Design: Preliminary Design Considerations.

    ERIC Educational Resources Information Center

    Croll, Paul R.

    A functional design model for a computerized adaptive testing (CAT) system was developed and presented through a series of hierarchy plus input-process-output (HIPO) diagrams. System functions were translated into system structure: specifically, into 34 software components. Implementation of the design in a physical system was addressed through…

  11. Test plan and preliminary report of airborne electromagentic environment survey over USA urban areas 0.4 to 18.0 GHz

    NASA Technical Reports Server (NTRS)

    Taylor, R. E.; Hill, J. S.

    1975-01-01

    An airborne electromagnetic environment survey is described of five urban areas where terrestrially-generated radio-frequency interference was measured over the frequency range from 0.4 to 18.0 GHz. A chartered Cessna 402 aircraft contained necessary measurement test equipment, including the receiving antennas mounted beneath the fuselage. Urban areas including Washington, D.C.; Baltimore, MD; Philadelphia, PA; New York, NY; Chicago, ILL; and Palestine, TX were surveyed. A flight test plan and preliminary test results for the 0.4 to 1.4 GHz frequency range, are included; a final test report describes more detailed results.

  12. Preliminary candidate advanced avionics system for general aviation

    NASA Technical Reports Server (NTRS)

    Mccalla, T. M.; Grismore, F. L.; Greatline, S. E.; Birkhead, L. M.

    1977-01-01

    An integrated avionics system design was carried out to the level which indicates subsystem function, and the methods of overall system integration. Sufficient detail was included to allow identification of possible system component technologies, and to perform reliability, modularity, maintainability, cost, and risk analysis upon the system design. Retrofit to older aircraft, availability of this system to the single engine two place aircraft, was considered.

  13. Preliminary planning study for safety relief valve experiments in a Mark III BWR pressure suppression system

    SciTech Connect

    McCauley, E.W.; Holman, G.S.

    1980-04-21

    In response to a request from the Water Reactor Safety Research Division of the US NRC, a preliminary study is provided which identifies key features and consideration involved in planning a comprehensive in-plant Safety Relief Valve experimental program for a Mark III containment design. The report provides identification of program objectives, measurement system requirements, and some details quantifying expected system response. In addition, a preliminary test matrix is outlined which involves a supporting philosophy intended to enhance the usefulness of the experimental results for all members of the program team: experimentalists, analysts, and plant operator.

  14. Preliminary evaluation of a membrane-based system for removing CO2 from air

    NASA Technical Reports Server (NTRS)

    Mccray, Scott B.; Wytcherley, Randi W.; Friesen, Dwayne T.; Ray, Rod J.

    1990-01-01

    Processes to remove and/or recover CO2 from air are essential to the long-term success of the U.S. space program. The results of a preliminary investigation of the use of a novel membrane-based system for removal of CO2 from air are presented. Features of this technology that make it attractive include the following: (1) it is lightweight; (2) it requires no consumables or expendables; (3) it is relatively simple; and (4) it does not rely directly on other subsystems. Preliminary designs of systems for removing CO2 from spacecraft cabin atmospheres and from the extravehicular mobility unit are presented.

  15. Systems design study of the Pioneer Venus spacecraft. Volume 2. Preliminary program development plan

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The preliminary development plan for the Pioneer Venus program is presented. This preliminary plan treats only developmental aspects that would have a significant effect on program cost. These significant development areas were: master program schedule planning; test planning - both unit and system testing for probes/orbiter/ probe bus; ground support equipment; performance assurance; and science integration Various test planning options and test method techniques were evaluated in terms of achieving a low-cost program without degrading mission performance or system reliability. The approaches studied and the methodology of the selected approach are defined.

  16. THE ELM SURVEY. IV. 24 WHITE DWARF MERGER SYSTEMS

    SciTech Connect

    Kilic, Mukremin; Brown, Warren R.; Kenyon, S. J.; Allende Prieto, Carlos; Heinke, Craig O.; Agueeros, M. A.; Kleinman, S. J.

    2012-06-01

    We present new radial velocity and X-ray observations of extremely low mass (ELM, {approx}0.2 M{sub Sun }) white dwarf (WD) candidates in the Sloan Digital Sky Survey Data Release 7 area. We identify seven new binary systems with 1-18 hr orbital periods. Five of the systems will merge due to gravitational wave radiation within 10 Gyr, bringing the total number of merger systems found in the ELM Survey to 24. The ELM Survey has now quintupled the known merger WD population. It has also discovered the eight shortest period detached binary WD systems currently known. We discuss the characteristics of the merger and non-merger systems observed in the ELM Survey, including their future evolution. About half of the systems have extreme mass ratios. These are the progenitors of the AM Canum Venaticorum systems and Type Ia supernovae. The remaining targets will lead to the formation of extreme helium stars, subdwarfs, or massive WDs. We identify three targets that are excellent gravitational wave sources. These should be detected by the Laser Interferometer Space Antenna like missions within the first year of operation. The remaining targets are important indicators of what the Galactic foreground may look like for gravitational wave observatories.

  17. TPX: Contractor preliminary design review. Volume 2, PF systems engineering

    SciTech Connect

    Calvin, H.A.

    1995-07-28

    This system development specification covers the Poloidal Field (PF) Magnet System, WBS 14 in the Princeton Plasma Physics Laboratory TPX Program to build a tokamak fusion reactor. This specification establishes the performance, design, development and test requirements of the PF Magnet System.

  18. Preliminary design of the Shuttle-C avionics recovery system

    NASA Technical Reports Server (NTRS)

    Brookfield, Morgan; Decker, Deron; Gilbert, Harold; Moore, David; Rist, Mark

    1989-01-01

    The analysis done in developing a recovery system for the Shuttle-C cargo vehicle is presented. This recovery system is comprised of a reentry capsule which houses the vehicles avionics. The avionics are contained in a single package which is extracted from the capsule by the parachute recovery system. The Shuttle-C will be able to satisfy NASA's design and mission requirements. Included, is an analysis of the structural, thermal protection, and parachute recovery systems. A discussion of the merits of the proposed system is also included.

  19. The Charter Medical Corporation clinical information system: a preliminary report.

    PubMed

    White, S L; Wingfield, C C

    1992-01-01

    Charter Medical Corporation's computerized Clinical Information System is described. The computerized system helps clinicians formulate and document individualized patient treatment plans along the continuum of care and to improve internal medical record keeping. The system can also help improve the efficient collecting, storing, retrieving, and reporting of clinical information, both for internal use and for external utilization review and case management. In the future, the system will be linked to Charter's continuous quality improvement efforts and to its new Clinical Outcome Monitoring System. PMID:10116649

  20. New approaches to enhance active steering system functionalities: preliminary results

    NASA Astrophysics Data System (ADS)

    Serarslan, Benan

    2014-09-01

    An important development of the steering systems in general is active steering systems like active front steering and steer-by-wire systems. In this paper the current functional possibilities in application of active steering systems are explored. A new approach and additional functionalities are presented that can be implemented to the active steering systems without additional hardware such as new sensors and electronic control units. Commercial active steering systems are controlling the steering angle depending on the driving situation only. This paper introduce methods for enhancing active steering system functionalities depending not only on the driving situation but also vehicle parameters like vehicle mass, tyre and road condition. In this regard, adaptation of the steering ratio as a function of above mentioned vehicle parameters is presented with examples. With some selected vehicle parameter changes, the reduction of the undesired influences on vehicle dynamics of these parameter changes has been demonstrated theoretically with simulations and with real-time driving measurements.

  1. Preliminary investigation of interconnected systems interactions for the safety injection system of Indian Point-3

    SciTech Connect

    Alesso, H.P.; Lappa, D.A.; Smith, C.F.; Sacks, I.J.

    1983-03-04

    The rich diversity of ideas and techniques for analyzing interconnected systems interaction has presented the NRC with the problem of identifying methods appropriate for their own review and audit. This report presents the findings of a preliminary study using the Digraph Matrix Analysis method to evaluate interconnected systems interactions for the safety injection system of Indian Point-3. The analysis effort in this study was subjected to NRC constraints regarding the use of Boolean logic, the construction of simplified plant representations or maps, and the development of heuristic measures as specified by the NRC. The map and heuristic measures were found to be an unsuccessful approach. However, from the effort to model and analyze the Indian Point-3 safety injection system, including Boolean logic in the model, singleton and doubleton cut-sets were identified. It is recommended that efforts excluding Boolean logic and utilizing the NRC heuristic measures not be pursed further and that the Digraph Matrix approach (or other comparable risk assessment technique) with Boolean logic included to conduct the audit of the Indian Point-3 systems interaction study.

  2. Survey of Command Execution Systems for NASA Spacecraft and Robots

    NASA Technical Reports Server (NTRS)

    Verma, Vandi; Jonsson, Ari; Simmons, Reid; Estlin, Tara; Levinson, Rich

    2005-01-01

    NASA spacecraft and robots operate at long distances from Earth Command sequences generated manually, or by automated planners on Earth, must eventually be executed autonomously onboard the spacecraft or robot. Software systems that execute commands onboard are known variously as execution systems, virtual machines, or sequence engines. Every robotic system requires some sort of execution system, but the level of autonomy and type of control they are designed for varies greatly. This paper presents a survey of execution systems with a focus on systems relevant to NASA missions.

  3. Simulation of diurnal thermal energy storage systems: Preliminary results

    NASA Astrophysics Data System (ADS)

    Katipamula, S.; Somasundaram, S.; Williams, H. R.

    1994-12-01

    This report describes the results of a simulation of thermal energy storage (TES) integrated with a simple-cycle gas turbine cogeneration system. Integrating TES with cogeneration can serve the electrical and thermal loads independently while firing all fuel in the gas turbine. The detailed engineering and economic feasibility of diurnal TES systems integrated with cogeneration systems has been described in two previous PNL reports. The objective of this study was to lay the ground work for optimization of the TES system designs using a simulation tool called TRNSYS (TRaNsient SYstem Simulation). TRNSYS is a transient simulation program with a sequential-modular structure developed at the Solar Energy Laboratory, University of Wisconsin-Madison. The two TES systems selected for the base-case simulations were: (1) a one-tank storage model to represent the oil/rock TES system; and (2) a two-tank storage model to represent the molten nitrate salt TES system. Results of the study clearly indicate that an engineering optimization of the TES system using TRNSYS is possible. The one-tank stratified oil/rock storage model described here is a good starting point for parametric studies of a TES system. Further developments to the TRNSYS library of available models (economizer, evaporator, gas turbine, etc.) are recommended so that the phase-change processes is accurately treated.

  4. Web Health Monitoring Survey: A New Approach to Enhance the Effectiveness of Telemedicine Systems

    PubMed Central

    2016-01-01

    , and found no significant difference. We computed the time to complete the questionnaire both as a measure of possible burden for patient, and to detect the risk of automatic responses. Neither of these hypothesis was confirmed, and differences in time to completion seemed to depend on health conditions. Focus groups with patients confirmed their appreciation for this “new” active role in a telemonitoring system. Conclusions The main and innovative aspect of our proposal is the use of a Web questionnaire to virtually recreate a checkup visit, integrating subjective (patient’s information) with objective data (biometric information). Our results, although preliminary and if need of further study, appear promising in proposing more effective telemedicine systems. Survey methodology could have an effective role in this growing field of research and applications. PMID:27268949

  5. Preliminary study of a possible automatic landing system

    NASA Technical Reports Server (NTRS)

    Sherman, W. L.; Winfrey, S. W.

    1974-01-01

    Navigation and control laws for a possible automatic landing system have been investigated. The system makes use of data from an inertial table and either an airborne or ground radar to generate signals that guide the airplane to a landing. All landing maneuvers take place within a zone that extends 6000 m out from the touchdown point, 4000 m on each side of the runway center line, and 540 m high. The results show that the system can adequately control the airplane on steep, curved decelerating approaches to a landing that takes place with small errors from the desired landing point and desired airplane attitude. The system studied would interface well with the scanning beam microwave landing system (MLS). The use of this system with the MLS makes it possible to incorporate an independent landing monitor.

  6. Preliminary comparison of laser and solar space power systems

    NASA Technical Reports Server (NTRS)

    Deyoung, R. J.; Tepper, W. D.; Conway, E. J.; Humes, D. H.

    1983-01-01

    Four laser receiver systems are compared to onboard solar photovoltaic power generation for spacecraft electrical requirements. The laser photovoltaic and laser MHD receivers were found to be lighter than a comparable planar solar photovoltaic system. The laser receiver also shows less drag at lower altitudes. Panel area is also reduced for the laser receiver allowing fewer Shuttle trips for construction. Finally, it is shown that a 1 megawatt laser and receiver system might be constructed with less weight than a comparable planar solar photovoltaic system.

  7. Preliminary test results and upgrades for an automated assembly system

    NASA Technical Reports Server (NTRS)

    Will, Ralph W.; Rhodes, Marvin D.; Quach, Cuong

    1992-01-01

    An automated structures assembly testbed developed by Langley Research Center to study the practical problems associated with the automated assembly of large space structures using robotic manipulators is described. Emphasis is placed on the requirements and features of system upgrades and their impact on system performance, flexibility, and reliability. The current research program is aimed at evolving the baseline assembly system into a flexible, robust, sensor-based system capable of assembling more complex truss-supported satellite systems. To achieve this objective, five system upgrades have been developed including a machine vision capability to eliminate taught robot arm positions; an on-board end-effector microprocessor to reduce communications; a second-generation end-effector to construct contoured trusses for antennas and install payloads; the installation of reflector-type panels on the truss to produce a complete and functional system, and an expert system to significantly reduce the amount of software code required for system operation and provide greater flexibility in implementing new features.

  8. Preliminary Transportation, Aging and Disposal Canister System Performance Specification

    SciTech Connect

    C.A Kouts

    2006-11-22

    This document provides specifications for selected system components of the Transportation, Aging and Disposal (TAD) canister-based system. A list of system specified components and ancillary components are included in Section 1.2. The TAD canister, in conjunction with specialized overpacks will accomplish a number of functions in the management and disposal of spent nuclear fuel. Some of these functions will be accomplished at purchaser sites where commercial spent nuclear fuel (CSNF) is stored, and some will be performed within the Office of Civilian Radioactive Waste Management (OCRWM) transportation and disposal system. This document contains only those requirements unique to applications within Department of Energy's (DOE's) system. DOE recognizes that TAD canisters may have to perform similar functions at purchaser sites. Requirements to meet reactor functions, such as on-site dry storage, handling, and loading for transportation, are expected to be similar to commercially available canister-based systems. This document is intended to be referenced in the license application for the Monitored Geologic Repository (MGR). As such, the requirements cited herein are needed for TAD system use in OCRWM's disposal system. This document contains specifications for the TAD canister, transportation overpack and aging overpack. The remaining components and equipment that are unique to the OCRWM system or for similar purchaser applications will be supplied by others.

  9. The Outer Solar System Origins Survey (OSSOS): a status update

    NASA Astrophysics Data System (ADS)

    Kavelaars, J. J.; Bannister, Michele T.; Gladman, Brett; Petit, Jean-Marc; Gwyn, S.; Chen, Ying-Tung Charles; Alexandersen, Mike; Volk, Kat

    2015-11-01

    OSSOS is a 560 hour imaging survey using MegaPrime on the CFHT designed to produce a well characterized sample of Kuiper belt objects whose orbital and physical properties will provide useful constraints on the evolutionary history of the outer solar system. Started in 2013, this 4 year project has now entered the finally year of survey operation. With 1/2 (84 square degrees) of the observation fully analyzed, OSOSS has detected and tracked 219 TNOs brighter than our typical flux limit of r' ~ 24.5. This is 30% more detections than the entire Canada-France Ecliptic Plane Survey (CFEPS), a precursor project.Based on the first quarter of the survey the OSSOS project confirms the CFEPS-L7 orbital model of the orbital structure of the TNO population (Petit et al., 2011) and has provided additional evidence of complex structure in the size distribution of scatterin TNOs (Shankman et al., 2015). A number of the OSSOS science teams are presenting results at this meeting: Bannister et al., Benecchi et al., Fraser et al., Volk et al. on a variety of aspects of the orbital and physical properties the OSSOS detected samples. Here we present a summary of the current status of the survey: field locations, basic characterization, detection rates and some global detection statistics.More details on the OSSOS project are available from our web site: www.ossos-survey.org

  10. Muon-catalyzed fusion experiment target and detector system. Preliminary design report

    SciTech Connect

    Jones, S.E.; Watts, K.D.; Caffrey, A.J.; Walter, J.B.

    1982-03-01

    We present detailed plans for the target and particle detector systems for the muon-catalyzed fusion experiment. Requirements imposed on the target vessel by experimental conditions and safety considerations are delineated. Preliminary designs for the target vessel capsule and secondary containment vessel have been developed which meet these requirements. In addition, the particle detection system is outlined, including associated fast electronics and on-line data acquisition. Computer programs developed to study the target and detector system designs are described.

  11. Preliminary Failure Modes and Effects Analysis of the US Massive Gas Injection Disruption Mitigation System Design

    SciTech Connect

    Lee C. Cadwallader

    2013-10-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a candidate design for the ITER Disruption Mitigation System. This candidate is the Massive Gas Injection System that provides machine protection in a plasma disruption event. The FMEA was quantified with “generic” component failure rate data as well as some data calculated from operating facilities, and the failure events were ranked for their criticality to system operation.

  12. Preliminary environmental assessment for the Satellite Power System (SPS), revision 1. Volume 1: Executive summary

    NASA Astrophysics Data System (ADS)

    1980-01-01

    A preliminary assessment of the environmental impacts of the proposed satellite power system (SPS) is summarized. In this system, satellites would collect solar energy in space, convert it to microwaves, and transmit the microwaves to receiving antennas (rectennas) on Earth. At the rectennas, the microwaves would be converted to electricity. The assessment considers microwave and nonmicrowave effects on the terrestrial environment and human health, atmospheric effects, and disruption of communications and other electromagnetic systems.

  13. A preliminary 6 DOF attitude and translation control system design for Starprobe

    NASA Technical Reports Server (NTRS)

    Mak, P.; Mettler, E.; Vijayarahgavan, A.

    1981-01-01

    The extreme thermal environment near perihelion and the high-accuracy gravitational science experiments impose unique design requirements on various subsystems of Starprobe. This paper examines some of these requirements and their impact on the preliminary design of a six-degree-of-freedom attitude and translational control system. Attention is given to design considerations, the baseline attitude/translational control system, system modeling, and simulation studies.

  14. Preliminary environmental assessment for the satellite power system (SPS). Revision 1. Volume 1. Executive summary

    SciTech Connect

    Not Available

    1980-01-01

    A preliminary assessment of the environmental impacts of the proposed satellite power system (SPS) is summarized here. In this system, satellites would collect solar energy in space, convert it to microwaves, and transmit the microwaves to receiving antennas (rectennas) on earth. At the rectennas, the microwaves would be converted to electricity. The assessment considers microwave and nonmicrowave effects on the terrestrial environment and human health, atmospheric effects, and disruption of communications and other electromagnetic systems.

  15. Preliminary design package for solar hot water system

    NASA Technical Reports Server (NTRS)

    1977-01-01

    This package includes technical information, schematics, drawings and brochures of the solar hot water system. This system consists of the following subsystems: collector, storage, transport, control, auxiliary energy, and Government-furnished site data acquisition. The two units being manufactured will be installed at Loxahatchee, Florida, and Macon, Georgia.

  16. An Instructional Satellite System for the United States: Preliminary Considerations.

    ERIC Educational Resources Information Center

    DuMolin, James R.; Morgan, Robert P.

    Based on educational, social, political, and other considerations, an instructional satellite system, AVSIN (Ausio-Visual Satellite Instruction), is hypothesized which represents one possible organizational and administrative arrangement for delivering large amounts of quality software to schools and learning centers. The AVSIN system is conceived…

  17. Preliminary design package for Sunspot Domestic Hot Water Heating System

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The design review includes a drawing list, auto-control logic, measurement definitions, and other document pertaining to the solar heated prototype hot water systems and two heat exchangers. The hot water systems consist of the following subsystems: collector, storage, control transport, auxiliary energy, and site data acquisition.

  18. Integrated Box Interrogation System (IBIS) Preliminary Design Study

    SciTech Connect

    DR. Stephen Croft; Mr. David Martancik; Dr. Brian Young; Dr. Patrick MJ Chard; Dr. Robert J Estop; Sheila Melton; Gaetano J. Arnone

    2003-01-13

    Canberra Industries has won the tendered solicitation, INEEL/EST-99-00121 for boxed waste Nondestructive Assay Development and Demonstration. Canberra will provide the Integrated Box Interrogation System (IBIS) which is a suite of assay instrumentation and a data reduction system that addresses the measurement needs for Boxed Wastes identified in the solicitation and facilitates the associated experimental program and demonstration of system capability. The IBIS system will consist of the next generation CWAM system, i.e. CWAM II, which is a Scanning Passive/Active Neutron interrogation system which we will call a Box Segmented Neutron Scanner (BSNS), combined with a physically separate Box Segmented Gamma-ray Scanning (BSGS) system. These systems are based on existing hardware designs but will be tailored to the large sample size and enhanced to allow the program to evaluate the following measurement criteria:Characterization and correction for matrix heterogeneity Characterization of non-uniform radio-nuclide and isotopic compositions Assay of high density matrices (both high-Z and high moderator contents)Correction for radioactive material physical form - such as self shielding or multiplication effects due to large accumulations of radioactive materials.Calibration with a minimal set of reference standards and representative matrices.THis document summarizes the conceptual design parameters of the IBIS and indicates areas key to the success of the project where development is to be centered. The work presented here is a collaborative effort between scientific staff within Canberra and within the NIS-6 group at LANL.

  19. A Preliminary Thesaurus of Environmental Engineering Terms for an Individual Information Retrieval System.

    ERIC Educational Resources Information Center

    Grady, Joni K.

    Wastewater treatment, microbiology, biochemistry, and engineering are the major subject areas covered in this preliminary thesaurus designed for use in a private information retrieval system. The thesaurus was developed through meetings where each descriptor was discussed, necessary scope notes were written, definition and cross references were…

  20. Preliminary design report for the K basins integrated water treatment system

    SciTech Connect

    Pauly, T.R., Westinghouse Hanford

    1996-08-12

    This Preliminary Design Report (PDR) provides a revised concept for the K Basins Integrated Water Treatment Systems (IWTS). This PDR incorporates the 11 recommendations made in a May 1996 Value Engineering session into the Conceptual Design, and provides new flow diagrams, hazard category assessment, cost estimate, and schedule for the IWTS Subproject.

  1. Preliminary investigation of ethanedintrile for control of weeds and nematodes important in Florida production systems.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A preliminary in vitro experiment was conducted with seeds of several weed species of importance in vegetable and ornamental production systems in Florida, and with root-knot nematode (Meloidogyne incognita) infested soil. The prepared weed and nematode inoculum were placed in open desiccators of m...

  2. A preliminary evaluation of a positron camera system using weighted decoding of individual crystals

    SciTech Connect

    Holtel, S.; Eriksson, L.; Larsson, J.E.; Ericson, T.; Stjernberg, H.; Hansen, P.; Bohm, C.; Kesselberg, M.; Rota, E.; Herzog, H.

    1988-02-01

    The whole-body positron camera PC4096-15WB is now in operation. It is based on a detection unit with sixteen scintillating crystals mounted on two dual photomultiplier tubes. The design ideas are specified and a system description is given. Preliminary test results including spatial resolution, sensitivity to true and random coincidences, scatter correction, and count rate linearity are presented.

  3. Preliminary safety evaluation for the spent nuclear fuel project`s cold vacuum drying system

    SciTech Connect

    Garvin, L.J., Westinghouse Hanford

    1996-07-01

    This preliminary safety evaluation (PSE) considers only the Cold Vacuum Drying System (CVDS) facility and its mission as it relates to the integrated process strategy (WHC 1995). The purpose of the PSE is to identify those CBDS design functions that may require safety- class and safety-significant accident prevention and mitigation features.

  4. Preliminary analysis of hub and spoke air freight distribution system

    NASA Technical Reports Server (NTRS)

    Whitehead, A. H., Jr.

    1978-01-01

    A brief analysis is made of the hub and spoke air freight distribution system which would employ less than 15 hub centers world wide with very large advanced distributed-load freighters providing the line-haul delivery between hubs. This system is compared to a more conventional network using conventionally-designed long-haul freighters which travel between numerous major airports. The analysis calculates all of the transportation costs, including handling charges and pickup and delivery costs. The results show that the economics of the hub/spoke system are severely compromised by the extensive use of feeder aircraft to deliver cargo into and from the large freighter terminals. Not only are the higher costs for the smaller feeder airplanes disadvantageous, but their use implies an additional exchange of cargo between modes compared to truck delivery. The conventional system uses far fewer feeder airplanes, and in many cases, none at all. When feeder aircraft are eliminated from the hub/spoke system, however, that system is universally more economical than any conventional system employing smaller line-haul aircraft.

  5. Preliminary operational results from the Willard solar power system

    NASA Technical Reports Server (NTRS)

    Fenton, D. L.; Abernathy, G. H.; Krivokapich, G.; Ellibee, D. E.; Chilton, V.

    1980-01-01

    The solar powered system located near Willard, New Mexico, generates mechanical or electrical power at a capacity of 19 kW (25 HP). The solar collection system incorporates east/west tracking parabolic trough collectors with a total aperture area of 1275 sq m (13,720 sq ft). The hot oil type thermal energy storage is sufficient for approximately 20 hours of power system operation. The system utilizes a reaction type turbine in conjunction with an organic Rankine cycle engine. Total collector field efficiency reaches a maximum of 20 percent near the winter solstice and about 50 percent during the summer. During the month of July, 1979, the system pumped 60 percent of the 35,300 cu m (28.6 acre-feet) of water delivered. Operating efficiencies for the turbine component, organic Rankine cycle engine and the complete power system are respectively 65 to 75 percent, 12 to 15 percent and 5 to 6 percent. Significant maintenance time was expended on both the collector and power systems throughout the operational period.

  6. Preliminary operational results from the Willard solar power system

    NASA Astrophysics Data System (ADS)

    Fenton, D. L.; Abernathy, G. H.; Krivokapich, G.; Ellibee, D. E.; Chilton, V.

    1980-05-01

    The solar powered system located near Willard, New Mexico, generates mechanical or electrical power at a capacity of 19 kW (25 HP). The solar collection system incorporates east/west tracking parabolic trough collectors with a total aperture area of 1275 sq m (13,720 sq ft). The hot oil type thermal energy storage is sufficient for approximately 20 hours of power system operation. The system utilizes a reaction type turbine in conjunction with an organic Rankine cycle engine. Total collector field efficiency reaches a maximum of 20 percent near the winter solstice and about 50 percent during the summer. During the month of July, 1979, the system pumped 60 percent of the 35,300 cu m (28.6 acre-feet) of water delivered. Operating efficiencies for the turbine component, organic Rankine cycle engine and the complete power system are respectively 65 to 75 percent, 12 to 15 percent and 5 to 6 percent. Significant maintenance time was expended on both the collector and power systems throughout the operational period.

  7. The 727 approach energy management system avionics specification (preliminary)

    NASA Technical Reports Server (NTRS)

    Jackson, D. O.; Lambregts, A. A.

    1976-01-01

    Hardware and software requirements for an Approach Energy Management System (AEMS) consisting of an airborne digital computer and cockpit displays are presented. The displays provide the pilot with a visual indication of when to manually operate the gear, flaps, and throttles during a delayed flap approach so as to reduce approach time, fuel consumption, and community noise. The AEMS is an independent system that does not interact with other navigation or control systems, and is compatible with manually flown or autopilot coupled approaches. Operational use of the AEMS requires a DME ground station colocated with the flight path reference.

  8. Preliminary evaluation of a space AMTEC power conversion system

    SciTech Connect

    Crowley, C.J. ); Sievers, R.K. )

    1991-01-10

    An original evaluation of a space solar energy source coupled with Alkali Metal Thermoelectric Conversion (AMTEC) is presented here. This study indicates that an AMTEC system would have 30 percent of the mass of a photovoltaic system and 70 percent of the mass of a Stirling cycle system at the 35-kWe level of power generation modules typical of the baseline for the U.S. Space Station. The operating temperatures and Sodium heat pipe components for solar receiver/TES hardware (currently being developed by NASA) integrate well with AMTEC power conversion. AMTEC is therefore an attractive alternative specifically for space solar power generation.

  9. Preliminary evaluation of a space AMTEC power conversion system

    NASA Technical Reports Server (NTRS)

    Crowley, Christopher J.; Sievers, Robert K.

    1991-01-01

    As original evaluation of a space solar energy source coupled with Alkali Metal Thermoelectric Conversion (AMTEC) is presented here. This study indicates that an AMTEC system would have 30 percent of the mass of a photovoltaic system and 70 percent of the mass of a Stirling cycle system at the 35-kWe level of power generation modules typical of the baseline for the U.S. Space Station. The operating temperatures and sodium heat pipe components for solar receiver/TES hardware (currently being developed by NASA) integrate well with AMTEC power conversion. AMTEC is therefore an attractive alternative specifically for space solar power generation.

  10. A survey of third components in spectroscopic and eclipsing systems

    NASA Astrophysics Data System (ADS)

    Herczeg, T. J.

    1988-03-01

    A magnitude-limited (V = 6.8) survey of systems found in the Seventh Catalogue of Spectroscopic Binaries (Batten et al., 1978) is used to investigate internally stable triple systems of the type ab-c. Emphasis is placed on systems where the close pair is a spectroscopic or eclipsing binary with orbital dimensions of the order of 1-2 AU or less. With allowance for observational bias, the ratio of double to multiple systems is found to approach 1:1. Multiplicities in the W UMa system and in cataclysmic variables are also considered.

  11. 40 CFR 35.927-2 - Sewer system evaluation survey.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act... transportation and treatment for each defined source of infiltration/inflow. (b) A report shall summarize the... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Sewer system evaluation survey....

  12. CMA Member Survey: Network Management Systems Showing Little Improvement.

    ERIC Educational Resources Information Center

    Lusa, John M.

    1998-01-01

    Discusses results of a survey of 112 network and telecom managers--members of the Communications Managers Association (CMA)--to identify problems relating to the operation of large enterprise networks. Results are presented in a table under categories of: respondent profile; network management systems; carrier management; enterprise management;…

  13. 49 CFR 192.723 - Distribution systems: Leakage surveys.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Distribution systems: Leakage surveys. 192.723 Section 192.723 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE...

  14. Conducting Sanitary Surveys of Water Supply Systems. Student Workbook.

    ERIC Educational Resources Information Center

    1976

    This workbook is utilized in connection with a 40-hour course on sanitary surveys of water supply systems for biologists, chemists, and engineers with experience as a water supply evaluator. Practical training is provided in each of the 21 self-contained modules. Each module outlines the purpose, objectives and content for that section. The course…

  15. Workers' Compensation System in Michigan. A Closed Case Survey.

    ERIC Educational Resources Information Center

    Hunt, H. Allan

    The Michigan Closed Case Survey examined workers' compensation cases that were closed in the fall of 1978. Specific objectives of the study were to compare the workers' compensation experience of the insured and self-insured employer populations, to provide an empirical description of the workers' compensation system in Michigan, and to determine…

  16. Analyze of waves dynamic over an intertidal mudflat of a sandy-gravely estuarine beach - Field survey and preliminary modeling approach

    NASA Astrophysics Data System (ADS)

    Morio, Olivier; Sedrati, Mouncef; Goubert, Evelyne

    2014-05-01

    As well as marine submersion or erosive phenomena, clay-silted sediment in-filling on estuarial and bay beaches are a main issue in these human-attractive areas. Coupled sandy/gravely and clay/silty intertidal areas can be observed in these particular coastal areas, depending of rivers characteristic (discharge of particle, water flow), ocean dynamics (wave exposure, current) and sediments sources. All around the world, sandy/gravely beaches are exposed to punctual or continuous input clay sediments. Vilaine estuary, Bay of Arcachon and Bay of Seine in France, Plymouth Bay in UK and also Wadden Sea in Deutschland are few examples of muddy/sandy coupled or mixed system. The beach of Bétahon (Ambon town, Brittany - France) is located on the external Vilaine estuary and is an example of this issue. This meso-macrotidal intermediate (low tide terrace) beach presents heterogeneous sediments. The upper intertidal zone is composed by sand and gravel and characterized by a steep slope. A very gentle slope characterized the lower part of the beach and is constituted by silt and clay. Clay/sand limit is characterized by a decimetric erosion cliff of mudflat along the beach. In order to understand bed variations and sediment transport of this complex heterogeneous beach, a well understanding of wave dynamic across the beach is necessary. This study focus on wave dynamics over the beach, using field observations and MIKE 21 3D wave numerical model. This paper is a preliminary approach of an upcoming global understanding of this estuarial beach behavior. Swell from deep-sea to near-shore area is modeled over a 100 km² area and real wind, deep sea wave characteristic, river water flow and tidal level are defined as open boundary conditions for the regional model. This last one is based on multiple bathymetric surveys over the last 50 years. Local model, triangular mesh gridded to 5 meters, covering Bétahon beach , is based on topographic and photographic survey of the mudflat

  17. Preliminary validation of a fabric smoothness assessment system

    NASA Astrophysics Data System (ADS)

    Turner, Chris; Sari-Sarraf, Hamed; Hequet, Eric F.; Lee, Sunho

    2003-04-01

    A fabric's tendency to wrinkle is vitally important to the textile industry as it impacts the visual appeal of apparels. Current methods of grading this characteristic, called fabric smoothness, are very subjective and inadequate. As such, a quantitative method for assessing fabric smoothness is of the utmost importance to the textile community. To that end, we have proposed a laser-based surface profiling system that utilizes a smart camera to sense the 3-D topography of the fabric specimens. The system incorporates methods based on anisotropic diffusion and the facet model for characterizing edge information that ultimately relate to a specimen's degree of wrinkling. In this paper, we detail the initial steps in a large-scale validation of this system. Using histograms of the extracted features, we compare the output of the system among 78 swatches of various color, type, and texture. The results show consistency among repeated scans of the same swatch as well as among different swatches taken from the same fabric sample. Also, since swatches taken from the same piece of fabric typically wrinkle similarly, this adds to the feasibility of the system. In other words, it adequately identifies and measures appropriate features of the wrinkles found on a sample.

  18. DOE Integrated Security System (DISS) preliminary communication security analysis

    SciTech Connect

    Sweeney, D.J.

    1993-10-01

    The purpose of this analysis is to document a technical approach to improve DOE Integrated Security System (DISS) dial-up communications security and the requirements to address them. This document is not intended as a comprehensive analysis of the security aspects of the DISS computer system but rather as an analysis of the dial-up communications security as it pertains to the use of the DISS database in the new DOE Automated Visitors Access Control System (DAVACS) procedures. Current access controls into the DISS will be discussed with emphasis on the DAVACS procedures. Recommendations will be provided for increasing the dial-up communications security into DISS as it relates to the automated visit procedures. Finally a design for an encrypted dial-up communication link to DISS will be given.

  19. Preliminary systems design study assessment report. Volume 7, Subsystem concepts

    SciTech Connect

    Mayberry, J.L.; Feizollahi, F.; Del Signore, J.C.

    1992-01-01

    The System Design Study (SDS), part of the Waste Technology Development Department at the Idaho National Engineering Laboratory (INEL), examined techniques available for the remediation of hazardous and transuranic waste stored at the Radioactive Waste Management Complex`s Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each. This volume contains the descriptions and other relevant information of the four subsystems required for most of the ex situ processing systems. This volume covers the metal decontamination and sizing subsystem, soils processing subsystem, low-level waste subsystem, and retrieval subsystem.

  20. The new camera calibration system at the US Geological Survey

    USGS Publications Warehouse

    Light, D.L.

    1992-01-01

    Modern computerized photogrammetric instruments are capable of utilizing both radial and decentering camera calibration parameters which can increase plotting accuracy over that of older analog instrumentation technology from previous decades. Also, recent design improvements in aerial cameras have minimized distortions and increased the resolving power of camera systems, which should improve the performance of the overall photogrammetric process. In concert with these improvements, the Geological Survey has adopted the rigorous mathematical model for camera calibration developed by Duane Brown. An explanation of the Geological Survey's calibration facility and the additional calibration parameters now being provided in the USGS calibration certificate are reviewed. -Author

  1. Sensitivity analysis of discrete structural systems: A survey

    NASA Technical Reports Server (NTRS)

    Adelman, H. M.; Haftka, R. T.

    1984-01-01

    Methods for calculating sensitivity derivatives for discrete structural systems are surveyed, primarily covering literature published during the past two decades. Methods are described for calculating derivatives of static displacements and stresses, eigenvalues and eigenvectors, transient structural response, and derivatives of optimum structural designs with respect to problem parameters. The survey is focused on publications addressed to structural analysis, but also includes a number of methods developed in nonstructural fields such as electronics, controls, and physical chemistry which are directly applicable to structural problems. Most notable among the nonstructural-based methods are the adjoint variable technique from control theory, and the Green's function and FAST methods from physical chemistry.

  2. Preliminary study to facilitate smart structure systems in bridge girders

    NASA Astrophysics Data System (ADS)

    Kirkpatrick, Thomas C.; Peterson, Danford O.; Rossi, Peter J.; Ray, Laura R.; Livingston, Richard A.

    1999-05-01

    Sensors are currently available and used to monitor structural performance and loads incurred by bridges already in service. However, there has been limited research concerning the stresses that steel bridge girders endure during transport from the manufacturer to the job site and during the installation process. This paper reports the measured stresses on steel bridge girders during transportation from Lancaster, PA to Hanover, NH and during construction of the Ledyard Bridge on the New Hampshire - Vermont border. Two different monitoring system were developed for this data acquisition in a mobile environment. The first, a fiber optic strain monitoring system, utilizing Bragg grating technology. The second utilized an electrical- resistive foil strain gage network, in conjunction with wireless telemetry equipment. Together, these two systems formed a smart structure system for monitoring bridge girders while confirming the accuracy of data gathered through redundancy. Result conclusively demonstrated for the first time, that stresses in beams during transportation are significant and approach the factor of safety margin in girder design.

  3. University Residential Buildings System. URBS Components Preliminary Design Manual.

    ERIC Educational Resources Information Center

    California Univ., Berkeley. Dept. of Physical Planning and Construction.

    Basic information and guidelines on the use of URBS components are provided for use by architects and engineers. The URBS system was developed in response to the competitive bidding on performance specifications, incorporating user requirements, economic constraints, industry capability and trade practices. The essence of the URBS Project--the…

  4. COMPUTER ASSISTED PRELIMINARY DESIGN FOR DRINKING WATER TREATMENT PROCESS SYSTEMS

    EPA Science Inventory

    The purpose of the study was to develop an interactive computer program to aid the design engineer in evaluating the performance and cost for any proposed drinking water treatment system consisting of individual unit processes. The 25 unit process models currently in the program ...

  5. PRELIMINARY ASSESSMENT OF THREE NCO LEADERSHIP PREPARATION TRAINING SYSTEMS.

    ERIC Educational Resources Information Center

    HOOD, PAUL D.; AND OTHERS

    THREE ALTERNATIVE LEADERSHIP TRAINING SYSTEMS WERE STUDIED TO EVALUATE WHAT MIGHT BE THE MOST FEASIBLE METHOD OF IDENTIFYING AND TRAINING POTENTIAL JUNIOR NONCOMMISSIONED OFFICERS, AS EARLY AS POSSIBLE IN THEIR ARMY CAREERS. TRAINING OBJECTIVES WERE DEFINED AND TRAINING MATERIALS AND ASSESSMENT DEVICES WERE DEVELOPED AND REFINED FOR APPLICATION IN…

  6. Preliminary analysis of an integrated logistics system for OSSA payloads

    NASA Technical Reports Server (NTRS)

    Palguta, T.; Bradley, W.; Stockton, T.

    1988-01-01

    The results of studies of the Office of Space Science and Applications' (OSSA) need for an integrated logistics system to support OSSA payloads, whether attached to the Space Station or free-flying are detailed. An executive summary, the integrated logistics support strategy, preparation of planning documents and a supportability analysis of the 1.8 meter centrifuge are discussed.

  7. PRELIMINARY DESIGN FOR DRINKING WATER TREATMENT PROCESS SYSTEMS

    EPA Science Inventory

    A computer model has been developed for use in estimating the performance and associated costs of proposed and existing water supply systems. Design procedures and cost-estimating relationships for 25 unit processes that can be used for drinking water treatment are contained with...

  8. Student Acceptance of the TICCIT System: A Preliminary Study.

    ERIC Educational Resources Information Center

    Asay, Calvin S.; Schneider, Edward W.

    Twenty male and female students from a high school psychology class participated in a formative evaluation of student acceptance and performance with the Primary Instruction Logic of the TICCIT delivery system. A secondary goal was a pilot effort to design a carrel that would optimize certain parameters of the physical/environmental conditions…

  9. Preliminary Design and Analysis of the GIFTS Instrument Pointing System

    NASA Technical Reports Server (NTRS)

    Zomkowski, Paul P.

    2003-01-01

    The Geosynchronous Imaging Fourier Transform Spectrometer (GIFTS) Instrument is the next generation spectrometer for remote sensing weather satellites. The GIFTS instrument will be used to perform scans of the Earth s atmosphere by assembling a series of field-of- views (FOV) into a larger pattern. Realization of this process is achieved by step scanning the instrument FOV in a contiguous fashion across any desired portion of the visible Earth. A 2.3 arc second pointing stability, with respect to the scanning instrument, must be maintained for the duration of the FOV scan. A star tracker producing attitude data at 100 Hz rate will be used by the autonomous pointing algorithm to precisely track target FOV s on the surface of the Earth. The main objective is to validate the pointing algorithm in the presence of spacecraft disturbances and determine acceptable disturbance limits from expected noise sources. Proof of concept validation of the pointing system algorithm is carried out with a full system simulation developed using Matlab Simulink. Models for the following components function within the full system simulation: inertial reference unit (IRU), attitude control system (ACS), reaction wheels, star tracker, and mirror controller. With the spacecraft orbital position and attitude maintained to within specified limits the pointing algorithm receives quaternion, ephemeris, and initialization data that are used to construct the required mirror pointing commands at a 100 Hz rate. This comprehensive simulation will also aid in obtaining a thorough understanding of spacecraft disturbances and other sources of pointing system errors. Parameter sensitivity studies and disturbance analysis will be used to obtain limits of operability for the GIFTS instrument. The culmination of this simulation development and analysis will be used to validate the specified performance requirements outlined for this instrument.

  10. Oxygen Consumption of Tilapia and Preliminary Mass Flows through a Prototype Closed Aquaculture System

    NASA Technical Reports Server (NTRS)

    Muller, Matthew S.; Bauer, Clarence F.

    1994-01-01

    Performance of NASA's prototype CELSS Breadboard Project Closed Aquaculture System was evaluated by estimating gas exchange quantification and preliminary carbon and nitrogen balances. The total system oxygen consumption rate was 535 mg/hr kg/fish (cv = 30%) when stocked with Tilapia aurea populations (fresh weights of 97 +/- 19 to 147 +/- 36 g/fish for various trials). Oxygen consumption by T. aurea (260 mg/hr kg/fish) contributed to approximately one-half of total system demand. Continuous carbon dioxide quantification methods were analyzed using the,relation of carbon dioxide to oxygen consumption. Overall food conversion rates averaged 18.2 +/- 3.2%. Major pathways for nitrogen and carbon in the system were described with preliminary mass closure of 60-80% and 60% for nitrogen and carbon.

  11. Energy efficient engine: Flight propulsion system preliminary analysis and design

    NASA Technical Reports Server (NTRS)

    Johnston, R. P.; Beitler, R. S.; Bobinger, R. O.; Broman, C. L.; Gravitt, R. D.; Heineke, H.; Holloway, P. R.; Klem, J. S.; Nash, D. O.; Ortiz, P.

    1980-01-01

    The characteristics of an advanced flight propulsion system (FPS), suitable for introduction in the late 1980's to early 1990's, was more fully defined. It was determined that all goals for efficiency, environmental considerations, and economics could be met or exceeded with the possible exception of NOx emission. In evaluating the FPS, all aspects were considered including component design, performance, weight, initial cost, maintenance cost, engine system integration (including nacelle), and aircraft integration considerations. The current FPS installed specific fuel consumption was reduced 14.2% from that of the CF6-50C reference engine. When integrated into an advanced, subsonic, study transport, the FPS produced a fuel burn savings of 15 to 23% and a direct operating cost reduction of 5 to 12% depending on the mission and study aircraft characteristics relative to the reference engine.

  12. Preliminary design of a future integrated design system

    NASA Technical Reports Server (NTRS)

    Diggins, R. M.

    1980-01-01

    IPAD is a system of computer programs and data supporting the aerospace-vehicle design process by providing a set of services to aid in the management of a design project, project technical work, and project support work. Its purpose is to integrate people, programs, and data into a unified aerospace-vehicle design system. All project-management and technical data, together with certain standard data, are stored in a data base. The IPAD functions allow project personnel to query the data base and to perform operations on the data. This permits the orderly sequencing of the task elements of a complex operation and provides common access to a single data base by various participating groups who otherwise would require many separate files. These capabilities will be provided on a single host computer or across multiple heterogeneous computers on a distributed progress basis.

  13. Energy efficient engine. Flight propulsion system preliminary analysis and design

    NASA Technical Reports Server (NTRS)

    Johnston, R. P.

    1979-01-01

    The characteristics of an advanced Flight Propulsion System (FPS) suitable for introduction in the late 1980's to early 1990's, were defined. It was determined that NASA goals for efficiency, environmental considerations, and economics could be met or exceeded with the possible exception of NOx emission. In evaluating the FPS, all aspects were considered including component design, performance, weight, initial cost, maintenance cost, engine-system integration (including nacelle), and aircraft integration considerations. In terms of the NASA goals, the current FPS installed specific fuel consumption was reduced 14.2% from that of the CF6-50C reference engine. When integrated into an advanced, subsonic, study transport, the FPS produced a fuel-burn savings of 15 to 23% and a direct operating cost reduction of 5 to 12% depending on the mission and study-aircraft characteristics relative to the reference engine.

  14. 77 FR 17407 - Proposed Information Collection; Comment Request; Annual Survey of School System Finances...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-26

    .... Census Bureau Proposed Information Collection; Comment Request; Annual Survey of School System Finances (Formerly Named Annual Survey of Local Government Finances--School Systems) AGENCY: U.S. Census Bureau... and Budget clearance for the Annual Survey of School System Finances. The Annual Survey of...

  15. Surface Contamination Monitor and Survey Information Management System

    SciTech Connect

    1998-02-01

    Shonka Research Associates, Inc.`s (SRA) Surface Contamination Monitor and Survey Information management System (SCM/SIMS) is designed to perform alpha and beta radiation surveys of floors and surfaces and document the measured data. The SRA-SCM/SIMS technology can be applied to routine operational surveys, characterization surveys, and free release and site closure surveys. Any large nuclear site can make use of this technology. This report describes a demonstration of the SRA-SCM/SIMS technology. This demonstration is part of the chicago Pile-5 (CP-5) Large-Scale Demonstration Project (LSDP) sponsored by the US Department of Energy (DOE), Office of Science and Technology (ST), Deactivation and Decommissioning Focus Area (DDFA). The objective of the LSDP is to select and demonstrate potentially beneficial technologies at the Argonne National Laboratory-East`s (ANL) CP-5 Research Reactor Facility. The purpose of the LSDP is to demonstrate that by using innovative and improved deactivation and decommissioning (D and D) technologies from various sources, significant benefits can be achieved when compared to baseline D and D technologies.

  16. Preliminary design of an intermittent smoke flow visualization system

    NASA Technical Reports Server (NTRS)

    Ward, Donald T.; Myatt, James H.

    1993-01-01

    A prototype intermittent flow visualization system that was designed to study vortex flow field dynamics has been constructed and tested through its ground test phase. It produces discrete pulses of dense white smoke consisting of particles of terephthalic acid by the pulsing action of a fast-acting three-way valve. The trajectories of the smoke pulses can be tracked by a video imaging system without intruding in the flow around in flight. Two methods of pulsing the smoke were examined. The simplest and safest approach is to simply divert the smoke between the two outlet ports on the valve; this approach should be particularly effective if it were desired to inject smoke at two locations during the same test event. The second approach involves closing off one of the outlet ports to momentarily block the flow. The second approach requires careful control of valve dwell times to avoid excessive pressure buildup within the cartridge container. This method also increases the velocity of the smoke injected into the flow. The flow of the smoke has been blocked for periods ranging from 30 to 80 milliseconds, depending on the system volume and the length of time the valve is allowed to remain open between valve closings.

  17. SLUDGE TREATMENT PROJECT ENGINEERED CONTAINER RETRIEVAL AND TRANSFER SYSTEM PRELIMINARY DESIGN HAZARD ANALYSIS SUPPLEMENT 1

    SciTech Connect

    FRANZ GR; MEICHLE RH

    2011-07-18

    This 'What/If' Hazards Analysis addresses hazards affecting the Sludge Treatment Project Engineered Container Retrieval and Transfer System (ECRTS) NPH and external events at the preliminary design stage. In addition, the hazards of the operation sequence steps for the mechanical handling operations in preparation of Sludge Transport and Storage Container (STSC), disconnect STSC and prepare STSC and Sludge Transport System (STS) for shipping are addressed.

  18. Mars Science Laboratory Entry, Descent and Landing System Development Challenges and Preliminary Flight Performance

    NASA Technical Reports Server (NTRS)

    Steltzner, Adam D.; San Martin, A. Miguel; Rivellini, Tommaso P.

    2013-01-01

    The Mars Science Laboratory project recently landed the Curiosity rover on the surface of Mars. With the success of the landing system, the performance envelope of entry, descent, and landing capabilities has been extended over the previous state of the art. This paper will present an overview of the MSL entry, descent, and landing system, a discussion of a subset of its development challenges, and include a discussion of preliminary results of the flight reconstruction effort.

  19. THE ELM SURVEY. II. TWELVE BINARY WHITE DWARF MERGER SYSTEMS

    SciTech Connect

    Kilic, Mukremin; Brown, Warren R.; Kenyon, S. J.; Prieto, Carlos Allende; Agueeros, M. A.; Heinke, Craig

    2011-01-20

    We describe new radial velocity and X-ray observations of extremely low-mass white dwarfs (ELM WDs, {approx}0.2 M{sub sun}) in the Sloan Digital Sky Survey Data Release 4 and the MMT Hypervelocity Star survey. We identify four new short period binaries, including two merger systems. These observations bring the total number of short period binary systems identified in our survey to 20. No main-sequence or neutron star companions are visible in the available optical photometry, radio, and X-ray data. Thus, the companions are most likely WDs. Twelve of these systems will merge within a Hubble time due to gravitational wave radiation. We have now tripled the number of known merging WD systems. We discuss the characteristics of this merger sample and potential links to underluminous supernovae, extreme helium stars, AM CVn systems, and other merger products. We provide new observational tests of the WD mass-period distribution and cooling models for ELM WDs. We also find evidence for a new formation channel for single low-mass WDs through binary mergers of two lower mass objects.

  20. Satellite Power System (SPS) environmental impacts, preliminary assessment

    NASA Technical Reports Server (NTRS)

    Livingston, F. R.

    1978-01-01

    Present power plant assessment factors are used to present satellite power system (SPS) impacts. In contrast to oil, gas, nuclear and coal fueled power plants, the SPS and hydroelectric power plants produce air, water, and solid waste emissions only during the construction phase. Land use impacts result from the placement of rectennas used for microwave receiving and rectifying. Air quality impacts of the SPS resulting from the construction phase amount to 0.405 metric tons per megawatt year. Solid wastes impacts are 0.108 metric tons per year of operation. Other impacts such as those caused by heavy lift launch vehicle sites are also discussed.

  1. Preliminary Design Report Shippingport Spent Fuel Drying and Inerting System

    SciTech Connect

    JEPPSON, D.W.

    2000-05-18

    A process description and system flow sheets have been prepared to support the design/build package for the Shippingport Spent Fuel Canister drying and inerting process skid. A process flow diagram was prepared to show the general steps to dry and inert the Shippingport fuel loaded into SSFCs for transport and dry storage. Flow sheets have been prepared to show the flows and conditions for the various steps of the drying and inerting process. Calculations and data supporting the development of the flow sheets are included.

  2. Preliminary design of an intermittent smoke flow visualization system

    NASA Technical Reports Server (NTRS)

    Ward, D. T.; Brandt, S. B.; Myatt, J. H.

    1992-01-01

    A prototype intermittent smoke flow visualization system for studying the flowfield of an aircraft in flight has been constructed and demonstrated. It provides discrete pulses of dense white smoke suitable for video imaging to determine the unsteady vortex core trajectory of fluid elements in a high angle-of-attack flowfield. Two methods of pulsing the smoke were initially investigated: (1) periodically diverting the smoke between two exit ports and (2) completely blocking the smoke flow for short times. System dynamics have been modeled mathematically, data have been collected in a wind tunnel with blockage times up to 80 milliseconds, and the prototype is currently being flown on a general aviation airplane to collect three-dimensional video data. Three different plenum chamber sizes are available. Data collected so far are consistent and repeatable, though care must be taken to provide adequate contrast levels for accurate video resolution. Camera frame rates of at least 180 frames/second and wide angle lenses for the video cameras are needed to acquire meaningful vortex core velocities and accelerations for the general aviation test aircraft installation.

  3. Preliminary materials assessment for the Satellite Power System (SPS)

    SciTech Connect

    Teeter, R.R.; Jamieson, W.M.

    1980-01-01

    Presently, there are two SPS reference design concepts (one using silicon solar cells; the other using gallium arsenide solar cells). A materials assessment of both systems was performed based on the materials lists set forth in the DOE/NASA SPS Reference System Report: Concept Development and Evaluation Program. This listing identified 22 materials (plus miscellaneous and organics) used in the SPS. Tracing the production processes for these 22 materials, a total demand for over 20 different bulk materials (copper, silicon, sulfuric acid, etc.) and nealy 30 raw materials (copper ore, sand, sulfur ore, etc.) was revealed. Assessment of these SPS material requirements produced a number of potential material supply problems. The more serious problems are those associated with the solar cell materials (gallium, gallium arsenide, sapphire, and solar grade silicon), and the graphite fiber required for the satellite structure and space construction facilities. In general, the gallium arsenide SPS option exhibits more serious problems than the silicon option, possibly because gallium arsenide technology is not as well developed as that for silicon. Results are presented and discussed in detail. (WHK)

  4. Using Opinion Surveys to Obtain Citizen and Parent Feedback About a School System.

    ERIC Educational Resources Information Center

    Baker, Michael E.

    This report provides an introduction to the use of opinion surveys in gaining information about a school system in order to make decisions. The topics addressed are reasons for surveying, selecting the respondents, survey methods, selecting the survey sample, structuring the survey, writing the questions, training interviewers, pretesting the…

  5. Modeling of enterprise information systems implementation: a preliminary investigation

    NASA Astrophysics Data System (ADS)

    Yusuf, Yahaya Y.; Abthorpe, M. S.; Gunasekaran, Angappa; Al-Dabass, D.; Onuh, Spencer

    2001-10-01

    The business enterprise has never been in greater need of Agility and the current trend will continue unabated well into the future. It is now recognized that information system is both the foundation and a necessary condition for increased responsiveness. A successful implementation of Enterprise Resource Planning (ERP) can help a company to move towards delivering on its competitive objectives as it enables suppliers to reach out to customers beyond the borders of traditional market defined by geography. The cost of implementation, even when it is successful, could be significant. Bearing in mind the potential strategic benefits, it is important that the implementation project is managed effectively. To this end a project cost model against which to benchmark ongoing project expenditure versus activities completed has been proposed in this paper.

  6. Preliminary description of the ground test accelerator cryogenic cooling system

    SciTech Connect

    Edeskuty, F.J.; Stewart, W.F.

    1988-01-01

    The Ground Test Accelerator (GTA) under construction at the Los Alamos National Laboratory is part of the Neutral Particle Beam Program supported by the Strategic Defense Initiative Office. The GTA is a full-sized test facility to evaluate the feasibility of using a negative ion accelerator to produce a neutral particle beam (NPB). The NPB would ultimately be used outside the earth's atmosphere as a target discriminator or as a directed energy weapon. The operation of the GTA at cryogenic temperature is advantageous for two reasons: first, the decrease of temperature caused a corresponding decrease in the rf heating of the copper in the various units of the accelerator, and second, at the lower temperature the decrease in the thermal expansion coefficient also provides greater thermal stability and consequently, better operating stability for the accelerator. This paper discusses the cryogenic cooling system needed to achieve these advantages. 5 figs., 3 tabs.

  7. Understanding waste for lean health information systems: a preliminary review.

    PubMed

    Kalong, Nadia Awang; Yusof, Maryati Mohd

    2013-01-01

    Despite the rapid application of the Lean method in healthcare, its study in IT environments, particularly in Health Information Systems (HIS), is still limited primarily by a lack of waste identification. This paper aims to review the literature to provide an insight into the nature of waste in HIS from the perspective of Lean management. Eight waste frameworks within the context of healthcare and information technology were reviewed. Based on the review, it was found that all the seven waste categories from the manufacturing sector also exist in both the healthcare and IT domains. However, the nature of the waste varied depending on the processes of the domains. A number of additional waste categories were also identified. The findings reveal that the traditional waste model can be adapted to identify waste in both the healthcare and IT sectors. PMID:23920657

  8. A preliminary geodetic data model for geographic information systems

    NASA Astrophysics Data System (ADS)

    Kelly, K. M.

    2009-12-01

    Our ability to gather and assimilate integrated data collections from multiple disciplines is important for earth system studies. Moreover, geosciences data collection has increased dramatically, with pervasive networks of observational stations on the ground, in the oceans, in the atmosphere and in space. Contemporary geodetic observations from several space and terrestrial technologies contribute to our knowledge of earth system processes and thus are a valuable source of high accuracy information for many global change studies. Assimilation of these geodetic observations and numerical models into models of weather, climate, oceans, hydrology, ice, and solid Earth processes is an important contribution geodesists can make to the earth science community. Clearly, the geodetic observations and models are fundamental to these contributions. ESRI wishes to provide leadership in the geodetic community to collaboratively build an open, freely available content specification that can be used by anyone to structure and manage geodetic data. This Geodetic Data Model will provide important context for all geographic information. The production of a task-specific geodetic data model involves several steps. The goal of the data model is to provide useful data structures and best practices for each step, making it easier for geodesists to organize their data and metadata in a way that will be useful in their data analyses and to their customers. Built on concepts from the successful Arc Marine data model, we introduce common geodetic data types and summarize the main thematic layers of the Geodetic Data Model. These provide a general framework for envisioning the core feature classes required to represent geodetic data in a geographic information system. Like Arc Marine, the framework is generic to allow users to build workflow or product specific geodetic data models tailored to the specific task(s) at hand. This approach allows integration of the data with other existing

  9. A preliminary transient-fault experiment on the SIFT computer system

    NASA Technical Reports Server (NTRS)

    Butler, Ricky W.; Elks, Carl R.

    1987-01-01

    This paper presents the results of a preliminary experiment to study the effectiveness of a fault-tolerant system's ability to handle transient faults. The primary goal of the experiment was to develop the techniques to measure the parameters needed for a reliability analysis of the SIFT computer system which includes th effects of transient faults. A key aspect of such an analysis is the determination of the effectiveness of the operating system's ability to discriminate between transient and permanent faults. A detailed description of the preliminary transient fault experiment along with the results from 297 transient fault injections are given. Although not enough data was obtained to draw statistically significant conclusions, the foundation has been laid for a large-scale transient fault experiment.

  10. An X-ray survey of 9 algol systems

    NASA Technical Reports Server (NTRS)

    White, N. E.; Marshall, F. E.

    1983-01-01

    The observed X-ray luminosities seen from an Einstein survey of nine Algol like systems are similar to those found by Pallavicini, et al. (1981) for single or widely separated rapidly rotating late stars, but fall an order of magnitude below those seen from RS CVn stars with similar orbital periods and spectral types. It is concluded that the X-ray emission is most probably associated with a hot coronae surrounding the secondary. Possible explanations for the lower luminosity of the Algol systems relative to the RS CVn systems are considered.

  11. An X-ray survey on nine algol systems

    NASA Technical Reports Server (NTRS)

    White, N. E.; Marshall, F. E.

    1983-01-01

    The observed X-ray luminosities seen from an Einstein survey of nine Algol like systems are similar to those found by Pallavicini, et al. (1981) for single or widely separated rapidly rotating late stars, but fall an order of magnitude below those seen from RS CVn stars with similar orbital periods and spectral types. It is concluded that the X-ray emission is most probably associated with a hot coronae surrounding the secondary. Possible explanations for the lower luminosity of the Algol systems relative to the RS CVn systems are considered. Previously announced in STAR as N83-22074

  12. Airborne multispectral detecting system for marine mammals survey

    NASA Astrophysics Data System (ADS)

    Podobna, Yuliya; Sofianos, James; Schoonmaker, Jon; Medeiros, Dustin; Boucher, Cynthia; Oakley, Daniel; Saggese, Steve

    2010-04-01

    This work presents an electro-optical multispectral capability that detects and monitors marine mammals. It is a continuance of Whale Search Radar SBIR program funded by PMA-264 through NAVAIR. A lightweight, multispectral, turreted imaging system is designed for airborne and ship based platforms to detect and monitor marine mammals. The system tests were conducted over the Humpback whale breeding and calving area in Maui, Hawaii. The results of the tests and the system description are presented. The development of an automatic whale detection algorithm is discussed as well as methodology used to turn raw survey data into quantifiable data products.

  13. The tracking control system of the VLT Survey Telescope.

    PubMed

    Schipani, P; Arcidiacono, C; Argomedo, J; Dall'Ora, M; D'Orsi, S; Farinato, J; Magrin, D; Marty, L; Ragazzoni, R; Umbriaco, G

    2012-09-01

    The VLT survey telescope is the latest telescope installed at European Southern Observatory's Paranal observatory that is considered one of the best sites for optical astronomy for the excellent seeing conditions. The exceptional quality of the site imposes tight requirements for the telescope tracking system that shall perform very well to fully exploit the extreme sharpness of the Chilean sky. We describe the specific solutions adopted for pointing, servo and guiding systems and the results obtained during the commissioning of the telescope. The hardware implementation relies on industry components and the control solutions privilege both the performance and the future maintainability of the system. PMID:23020397

  14. Expert systems for flow cytometry data analysis: A preliminary report

    SciTech Connect

    Salzman, G.C. ); Stewart, C.C. . Lab. of Flow Cytometry); Duque, R.E. )

    1990-01-01

    Flow Cytometry has become an accepted technique in the clinical laboratory for rapid immunophenotyping of patient blood samples. Multiple, fluorescent labeled monoclonal antibodies are used to tag the cells, which are then analyzed one at a time at rates of several thousand cells a second. Patient samples are processed through the flow cytometer at more than one a minute. Clinicians are being overwhelmed by the large amount of data that must be analyzed to provide the information needed to assist in disease diagnosis. An expert system is being developed to assist clinicians in analyzing this multivariate flow cytometry data. The data from each sample are processed by a clustering algorithm, which finds the means of the distinct cell subpopulations in a sample. These mean values of fluorescence are translated into words such as negative,'' dim'' and bright'' and the words are combined into patterns that are matched against the premises on the left hand side of the rules used to identify the disease categories. This is a report of work in progress. 13 refs., 4 figs.

  15. Preliminary assessment of coal-based industrial energy systems

    SciTech Connect

    Not Available

    1980-01-01

    This report presents the results of a study, performed by Mittelhauser Corp. and Resource Engineering, Inc. to identify the potential economic, environmental, and energy impacts of possible New Source Performance Standards for industrial steam generators on the use of coal and coal-derived fuels. A systems-level approach was used to take mine-mouth coal and produce a given quantity of heat input to a new boiler at an existing Chicago industrial-plant site. The technologies studied included post-combustion clean-up, atmospheric fluidized-bed combustion, solvent-refined coal liquids, substitute natural gas, and low-Btu gas. Capital and operating costs were prepared on a mid-1985 basis from a consistent set of economic guidelines. The cases studied were evaluated using three levels of air emission controls, two coals, two boiler sizes, and two operating factors. Only those combinations considered likely to make a significant impact on the 1985 boiler population were considered. The conclusions drawn in the report are that the most attractive applications of coal technology are atmospheric fluidized-bed combustion and post-combustion clean-up. Solvent-refined coal and probably substitute natural gas become competitive for the smaller boiler applications. Coal-derived low-Btu gas was found not to be a competitive boiler fuel at the sizes studied. It is recommended that more cases be studied to broaden the applicability of these results.

  16. Formal Modeling and Analysis of a Preliminary Small Aircraft Transportation System (SATS)Concept

    NASA Technical Reports Server (NTRS)

    Carrreno, Victor A.; Gottliebsen, Hanne; Butler, Ricky; Kalvala, Sara

    2004-01-01

    New concepts for automating air traffic management functions at small non-towered airports raise serious safety issues associated with the software implementations and their underlying key algorithms. The criticality of such software systems necessitates that strong guarantees of the safety be developed for them. In this paper we present a formal method for modeling and verifying such systems using the PVS theorem proving system. The method is demonstrated on a preliminary concept of operation for the Small Aircraft Transportation System (SATS) project at NASA Langley.

  17. State of the art survey of network operating systems development

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The results of the State-of-the-Art Survey of Network Operating Systems (NOS) performed for Goddard Space Flight Center are presented. NOS functional characteristics are presented in terms of user communication data migration, job migration, network control, and common functional categories. Products (current or future) as well as research and prototyping efforts are summarized. The NOS products which are revelant to the space station and its activities are evaluated.

  18. Preliminary analysis of the Baranof Fan system, Gulf of Alaska, based on 2D seismic reflection and multibeam bathymetry data

    NASA Astrophysics Data System (ADS)

    LeVoir, M. A.; Gulick, S. P.; Reece, R.; Barth, G. A.; Childs, J. R.; Everson, E. D.; Hart, P. E.; Johnson, K. M.; Lester, W. R.; Sliter, R. W.

    2011-12-01

    The Baranof Fan is a large marine sedimentary system in the eastern Gulf of Alaska, straddling the border between the U.S. and Canada. The volume of the Fan is estimated to be > 200,000 km3. Little is known about the depositional timing, the tectonic and morphologic processes influencing its development, or the role of channel aggradation and avulsion in its progression. Both tectonic and climatic transitions likely influenced the formation and evolution of the Fan, with events including the onset of northern hemisphere glaciation, the Mid-Pleistocene transition, the transport of the Yakutat Terrane along the southeast Alaskan margin, and the uplift of the Coast Mountains. 2D seismic reflection and multibeam bathymetry data were collected in the Gulf of Alaska in June 2011 aboard the R/V Marcus G. Langseth as a part of the U.S. Extended Continental Shelf (ECS) program assessing potential opportunities under the United Nations Law of the Sea Convention. The purpose of the 2011 survey was to determine sediment thickness, velocity structure, stratigraphic architecture, and crustal structure on of the Gulf of Alaska seafloor in support of U.S. continental shelf maritime zone definition. The surveyed geologic features include the Surveyor and Baranof sedimentary systems, which control active sediment distribution in the Gulf of Alaska. Preliminary analysis of these data show four distinct buried channels throughout the mid to distal Baranof Fan, ranging in width from 5 - 9 km, which may have evolved into modern surface channels (ranging in width from 2 - 7 km) visible in both the seismic data and multibeam bathymetry. The location and trajectory of these buried channels, however, appears distinct from the modern Horizon and Mukluk Channels; the buried channels may have avulsed into the modern channel systems, or could possibly be older and now abandoned branches instrumental in building the westward part of the Fan. All of the imaged channels appear to be depositional

  19. Operating Systems for Wireless Sensor Networks: A Survey

    PubMed Central

    Farooq, Muhammad Omer; Kunz, Thomas

    2011-01-01

    This paper presents a survey on the current state-of-the-art in Wireless Sensor Network (WSN) Operating Systems (OSs). In recent years, WSNs have received tremendous attention in the research community, with applications in battlefields, industrial process monitoring, home automation, and environmental monitoring, to name but a few. A WSN is a highly dynamic network because nodes die due to severe environmental conditions and battery power depletion. Furthermore, a WSN is composed of miniaturized motes equipped with scarce resources e.g., limited memory and computational abilities. WSNs invariably operate in an unattended mode and in many scenarios it is impossible to replace sensor motes after deployment, therefore a fundamental objective is to optimize the sensor motes’ life time. These characteristics of WSNs impose additional challenges on OS design for WSN, and consequently, OS design for WSN deviates from traditional OS design. The purpose of this survey is to highlight major concerns pertaining to OS design in WSNs and to point out strengths and weaknesses of contemporary OSs for WSNs, keeping in mind the requirements of emerging WSN applications. The state-of-the-art in operating systems for WSNs has been examined in terms of the OS Architecture, Programming Model, Scheduling, Memory Management and Protection, Communication Protocols, Resource Sharing, Support for Real-Time Applications, and additional features. These features are surveyed for both real-time and non-real-time WSN operating systems. PMID:22163934

  20. Exploring the Outer Solar System with the ESSENCE Supernova Survey

    SciTech Connect

    Becker, A.C.; Arraki, K.; Kaib, N.A.; Wood-Vasey, W.M.; Aguilera, C.; Blackman, J.W.; Blondin, S.; Challis, P.; Clocchiatti, A.; Covarrubias, R.; Damke, G.; Davis, T.M.; Filippenko, A.V.; Foley, R.J.; Garg, A.; Garnavich, P.M.; Hicken, M.; Jha, S.; Kirshner, R.P.; Krisciunas, K.; Leibundgut, B.; /Munich, Tech. U. /UC, Berkeley /NOAO, Tucson /Washington U., Seattle, Astron. Dept. /Fermilab /Harvard-Smithsonian Ctr. Astrophys. /Harvard U. /Chile U., Santiago /Ohio State U. /Cerro-Tololo InterAmerican Obs. /Harvard U. /Baltimore, Space Telescope Sci. /Johns Hopkins U. /Australian Natl. U., Canberra /Australian Natl. U., Canberra /Cerro-Tololo InterAmerican Obs. /Munich, Tech. U. /Harvard-Smithsonian Ctr. Astrophys. /Harvard U. /Cerro-Tololo InterAmerican Obs. /Texas A-M /Cerro-Tololo InterAmerican Obs.

    2011-11-10

    We report the discovery and orbital determination of 14 trans-Neptunian objects (TNOs) from the ESSENCE Supernova Survey difference imaging data set. Two additional objects discovered in a similar search of the SDSS-II Supernova Survey database were recovered in this effort. ESSENCE repeatedly observed fields far from the solar system ecliptic (-21{sup o} < {beta} < -5{sup o}), reaching limiting magnitudes per observation of I {approx} 23.1 and R {approx} 23.7. We examine several of the newly detected objects in detail, including 2003 UC{sub 414}, which orbits entirely between Uranus and Neptune and lies very close to a dynamical region that would make it stable for the lifetime of the solar system. 2003 SS{sub 422} and 2007 TA{sub 418} have high eccentricities and large perihelia, making them candidate members of an outer class of TNOs. We also report a new member of the 'extended' or 'detached' scattered disk, 2004 VN{sub 112}, and verify the stability of its orbit using numerical simulations. This object would have been visible to ESSENCE for only {approx}2% of its orbit, suggesting a vast number of similar objects across the sky. We emphasize that off-ecliptic surveys are optimal for uncovering the diversity of such objects, which in turn will constrain the history of gravitational influences that shaped our early solar system.

  1. Operating systems for wireless sensor networks: a survey.

    PubMed

    Farooq, Muhammad Omer; Kunz, Thomas

    2011-01-01

    This paper presents a survey on the current state-of-the-art in Wireless Sensor Network (WSN) Operating Systems (OSs). In recent years, WSNs have received tremendous attention in the research community, with applications in battlefields, industrial process monitoring, home automation, and environmental monitoring, to name but a few. A WSN is a highly dynamic network because nodes die due to severe environmental conditions and battery power depletion. Furthermore, a WSN is composed of miniaturized motes equipped with scarce resources e.g., limited memory and computational abilities. WSNs invariably operate in an unattended mode and in many scenarios it is impossible to replace sensor motes after deployment, therefore a fundamental objective is to optimize the sensor motes' life time. These characteristics of WSNs impose additional challenges on OS design for WSN, and consequently, OS design for WSN deviates from traditional OS design. The purpose of this survey is to highlight major concerns pertaining to OS design in WSNs and to point out strengths and weaknesses of contemporary OSs for WSNs, keeping in mind the requirements of emerging WSN applications. The state-of-the-art in operating systems for WSNs has been examined in terms of the OS Architecture, Programming Model, Scheduling, Memory Management and Protection, Communication Protocols, Resource Sharing, Support for Real-Time Applications, and additional features. These features are surveyed for both real-time and non-real-time WSN operating systems. PMID:22163934

  2. Instrumentation development for space debris optical observation system in Indonesia: Preliminary results

    NASA Astrophysics Data System (ADS)

    Dani, Tiar; Rachman, Abdul; Priyatikanto, Rhorom; Religia, Bahar

    2015-09-01

    An increasing number of space junk in orbit has raised their chances to fall in Indonesian region. So far, three debris of rocket bodies have been found in Bengkulu, Gorontalo and Lampung. LAPAN has successfully developed software for monitoring space debris that passes over Indonesia with an altitude below 200 km. To support the software-based system, the hardware-based system has been developed based on optical instruments. The system has been under development in early 2014 which consist of two systems: the telescopic system and wide field system. The telescopic system uses CCD cameras and a reflecting telescope with relatively high sensitivity. Wide field system uses DSLR cameras, binoculars and a combination of CCD with DSLR Lens. Methods and preliminary results of the systems will be presented.

  3. A mobile telephone-based SMS and internet survey system for self-assessment in Australian anaesthesia: experience of a single practitioner.

    PubMed

    Belavy, D

    2014-11-01

    Self-assessment and audit in anaesthesia require a systematic approach to postoperative data collection. The increasing prevalence of mobile internet technology offers a new data collection method for anaesthetists. In this paper, a system for mobile internet data collection is described and the preliminary experience with its use is presented. The system was developed by the author and combined an open source survey application and a short message service (SMS) gateway to send SMS messages to patients after their anaesthesia and surgery. The messages requested patients to complete an online Quality of Recovery survey questionnaire if they had a smartphone. The results were immediately available. A preliminary survey of consenting patients with available mobile telephone numbers in a private practice was undertaken by the author. A total of 123 procedures were eligible for follow-up and survey requests were sent to 94 patients. Sixty-five surveys were completed. This represents 69% of surveys requested, demonstrating that mobile phone technology can be used to provide significant amounts of data for quality assurance. However, the implementation of a mobile internet data collection system requires consideration of privacy principles, security and ethical handling of data. PMID:25342410

  4. Conversion of the Aerodynamic Preliminary Analysis System (APAS) to an IBM PC Compatible Format

    NASA Technical Reports Server (NTRS)

    Kruep, John M.

    1995-01-01

    The conversion of the Aerodynamic Preliminary Analysis System (APAS) software from a Silicon Graphics UNIX-based platform to a DOS-based IBM PC compatible is discussed. Relevant background information is given, followed by a discussion of the steps taken to accomplish the conversion and a discussion of the type of problems encountered during the conversion. A brief comparison of aerodynamic data obtained using APAS with data from another source is also made.

  5. Preliminary design package for residential heating/cooling system: Rankine air conditioner redesign

    NASA Technical Reports Server (NTRS)

    1978-01-01

    A summary of the preliminary redesign and development of a marketable single family heating and cooling system is presented. The interim design and schedule status of the residential (3-ton) redesign, problem areas and solutions, and the definition of plans for future design and development activities were discussed. The proposed system for a single-family residential heating and cooling system is a single-loop, solar-assisted, hydronic-to-warm-air heating subsystem with solar-assisted domestic water heating and a Rankine-driven expansion air-conditioning subsystem.

  6. Development of X-TOOLSS: Preliminary Design of Space Systems Using Evolutionary Computation

    NASA Technical Reports Server (NTRS)

    Schnell, Andrew R.; Hull, Patrick V.; Turner, Mike L.; Dozier, Gerry; Alverson, Lauren; Garrett, Aaron; Reneau, Jarred

    2008-01-01

    Evolutionary computational (EC) techniques such as genetic algorithms (GA) have been identified as promising methods to explore the design space of mechanical and electrical systems at the earliest stages of design. In this paper the authors summarize their research in the use of evolutionary computation to develop preliminary designs for various space systems. An evolutionary computational solver developed over the course of the research, X-TOOLSS (Exploration Toolset for the Optimization of Launch and Space Systems) is discussed. With the success of early, low-fidelity example problems, an outline of work involving more computationally complex models is discussed.

  7. Hierarchical Modeling and Robust Synthesis for the Preliminary Design of Large Scale Complex Systems

    NASA Technical Reports Server (NTRS)

    Koch, Patrick N.

    1997-01-01

    Large-scale complex systems are characterized by multiple interacting subsystems and the analysis of multiple disciplines. The design and development of such systems inevitably requires the resolution of multiple conflicting objectives. The size of complex systems, however, prohibits the development of comprehensive system models, and thus these systems must be partitioned into their constituent parts. Because simultaneous solution of individual subsystem models is often not manageable iteration is inevitable and often excessive. In this dissertation these issues are addressed through the development of a method for hierarchical robust preliminary design exploration to facilitate concurrent system and subsystem design exploration, for the concurrent generation of robust system and subsystem specifications for the preliminary design of multi-level, multi-objective, large-scale complex systems. This method is developed through the integration and expansion of current design techniques: Hierarchical partitioning and modeling techniques for partitioning large-scale complex systems into more tractable parts, and allowing integration of subproblems for system synthesis; Statistical experimentation and approximation techniques for increasing both the efficiency and the comprehensiveness of preliminary design exploration; and Noise modeling techniques for implementing robust preliminary design when approximate models are employed. Hierarchical partitioning and modeling techniques including intermediate responses, linking variables, and compatibility constraints are incorporated within a hierarchical compromise decision support problem formulation for synthesizing subproblem solutions for a partitioned system. Experimentation and approximation techniques are employed for concurrent investigations and modeling of partitioned subproblems. A modified composite experiment is introduced for fitting better predictive models across the ranges of the factors, and an approach for

  8. Active optics system of the VLT Survey Telescope.

    PubMed

    Schipani, Pietro; Noethe, Lothar; Magrin, Demetrio; Kuijken, Konrad; Arcidiacono, Carmelo; Argomedo, Javier; Capaccioli, Massimo; Dall'Ora, Massimo; D'Orsi, Sergio; Farinato, Jacopo; Fierro, Davide; Holzlöhner, Ronald; Marty, Laurent; Molfese, Cesare; Perrotta, Francesco; Ragazzoni, Roberto; Savarese, Salvatore; Rakich, Andrew; Umbriaco, Gabriele

    2016-03-01

    This paper describes the active optics system of the VLT Survey Telescope, the 2.6-m survey telescope designed for visible wavelengths of the European Southern Observatory at Cerro Paranal, in the Atacama desert. The telescope is characterized by a wide field of view (1.42 deg diameter), leading to tighter active optics than in conventional telescopes, in particular for the alignment requirements. We discuss the effects of typical error sources on the image quality and present the specific solutions adopted for wavefront sensing and correction of the aberrations, which are based on the shaping of a monolithic primary mirror and the positioning of the secondary in five degrees of freedom. PMID:26974616

  9. Ten-State Nutrition Survey in the United States, 1968-70. Preliminary Report to the Congress, April 1971.

    ERIC Educational Resources Information Center

    Center for Disease Control (DHEW/PHS), Atlanta, GA.

    This report of the Department of Health, Education, and Welfare to the Congress concerns the nutrition of people living in 10 states, from 1968-70. The data presented in this booklet present the preliminary findings for New York City and New York State. The data represent selected characteristics and findings in the population groups that were…

  10. Design and preliminary evaluation of an underwater laser-based imaging system

    SciTech Connect

    McRae, T.; Kulp, T.; Garvis, D.; Kennedy, R.; Salmon, T.

    1988-03-01

    The design and preliminary evaluation of an underwater laser-based imaging system (UWLIS) being developed by the Lawrence Livermore National Laboratory for the Naval Sea Systems Command is described. The system is composed of a synchronously scanning argon-ion laser beam and a very narrow (4 milliradian) field-of-view detector. The laser beam and detector field of view are separated at the imaging system, but converge at the target to reduce the common optical scattering volume. The system produces a standard real-time TV image and has a predicted range of 100 m for 5 watts of laser power. The results of evaluations conducted in a 15-m deep tank at the Naval Coastal Systems Center are presented and discussed. The performance of the UWLIS in various turbid water conditions is compared to typical low-light-level underwater TV systems.

  11. Preliminary Results with a Computerized Information System for Emergency Medical Services

    PubMed Central

    Attinger, E. O.; Anné, A.; Edlich, R.

    1977-01-01

    The design and implementation of a comprehensive Emergency Medical Care system for Central Virginia is described. From its inception, the design of the proposed EMS System was based on the concept that continuous monitoring and evaluation of systems performance is necessary if the impact of the system on the medical care provided within the region was to be assessed. To provide the necessary data for this task, a computerized information system was designed and implemented, that provides three functions: 1. A data base, accessible in real time, containing demographic characteristics, process and outcome data and treatment protocols. 2. Online consultation for physician and Advanced Life Support personnel. 3. Systems structure: (Resource inventory) Preliminary results obtained with this system are discussed.

  12. A survey of manufacturers of solar thermal energy systems

    NASA Technical Reports Server (NTRS)

    Levine, N.; Slonski, M. L.

    1982-01-01

    Sixty-seven firms that had received funding for development of solar thermal energy systems (STES) were surveyed. The effect of the solar thermal technology systems program in accelerating (STES) were assessed. The 54 firms still developing STES were grouped into a production typology comparing the three major technologies with three basic functions. It was discovered that large and small firms were developing primarily central receiver systems, but also typically worked on more than one technology. Most medium-sized firms worked only on distributed systems. Federal support of STES was perceived as necessary to allow producers to take otherwise unacceptable risks. Approximately half of the respondents would drop out of STES if support were terminated, including a disproportionate number of medium-sized firms. A differentiated view of the technology, taking into account differing firm sizes and the various stages of technology development, was suggested for policy and planning purposes.

  13. A Survey of Active Vibration Isolation Systems for Microgravity Applications

    NASA Technical Reports Server (NTRS)

    Grodsinsky, Carlos M.; Whorton, Mark S.

    2000-01-01

    In view of the utility of space vehicles as orbiting science laboratories, the need for vibration isolation systems for acceleration sensitive experiments has gained increasing visibility. To date, three active microgravity vibration isolation systems have successfully been demonstrated in flight. This paper provides a tutorial discussion of the microgravity vibration isolation problem including a description of the acceleration environment of the International Space Station and attenuation requirements as well as a comparison of the dynamics of passive isolation, active rack-level isolation, and active payload-level isolation. This paper also surveys the flight test results of the three demonstrated systems: Suppression of Transient Accelerations By Levitation (STABLE); the Microgravity Vibration Isolation Mount (MIM); and the Active Rack Isolation System (ARIS).

  14. Survey of Active Vibration Isolation Systems for Microgravity Applications

    NASA Technical Reports Server (NTRS)

    Grodsinsky, Carlos M.; Whorton, Mark S.

    2000-01-01

    In view of the utility of space vehicles as orbiting science laboratories, the need for vibration isolation systems for acceleration-sensitive experiments has gained increasing visibility. To date, three active microgravity vibration isolation systems have successfully been demonstrated in flight. A tutorial discussion of the microgravity vibration isolation problem, including a description of the acceleration environment of the International Space Station and attenuation requirements, as well as a comparison or the dynamics of passive isolation, active rack-level isolation, and active payload-level isolation is provided. The flight test results of the three demonstrated systems: suppression of transient accelerations by levitation, the microgravity vibration isolation mount, and the active rack isolation system are surveyed.

  15. A ROSAT Survey of Near-Contact Binary Systems

    NASA Astrophysics Data System (ADS)

    Shaw, J. S.; Caillault, J.-P.; Schmitt, J. H. M. M.

    1994-12-01

    We have conducted a survey of near-contact binary systems observed during the ROSAT All-Sky Survey (RASS). The near-contact binaries (NCBs) have an A- or F-type primary, with a companion which is one to two spectral types cooler. The systems have periods less than one day and display strong tidal interaction, but are not in contact like the W UMa systems. There are more than 150 such systems known to exist. We have analyzed the RASS data for all of those (58) within 400 pc. We report the detection of 14 systems with X-ray count rates > 0.01 cts s(-1) . The X-ray luminosity function for the NCBs is very similar to that for A-type W UMa systems (derived, admittedly, from only a handful of EINSTEIN observations), but appears to be significantly different from those of W-type W UMa systems and RS CVn binaries. This is consistent with the proposed scenario that the NCBs are evolutionary precursors to the A-type W UMa binaries. The mean X-ray luminosity of the NCBs is log L_x = 29.3+/-0.1 ergs s(-1) , less than that of the RS CVns, but greater than that of normal late-type main sequence star s. The detection of these systems may help to explain why many presumably single A-type stars were detected in the RASS; i.e., the ``single" A-stars may, in fact, be binaries, like the NCBs, with late-type companions. This research was supported in part by NASA Grants NAG 5-1610 and NAG 5-2095 to the University of Georgia.

  16. A New Blondin System for Surveying and Photogrammetry

    PubMed Central

    Cuesta, Federico; Lopez-Rodriguez, Francisco M.; Esteban, Antonio

    2013-01-01

    The main objective of the system presented in this paper is to provide surveyors and engineers with a new photogrammetry device that can be easily integrated with surveying total stations and a global navigation satellite system (GNSS) infrastructure at a construction site, taking advantage of their accuracy and overcoming limitations of aerial vehicles with respect to weight, autonomy and skilled operator requirements in aerial photogrammetry. The system moves between two mounting points, in a blondin ropeway configuration, at the construction site, taking pictures and recording the data of the position and the orientation along the cable path. A cascaded extended Kalman filter is used to integrate measurements from the on-board inertial measurement unit (IMU), a GPS and a GNSS. Experimental results taken in a construction site show the system performance, including the validation of the position estimation, with a robotic surveying total station, or the creation of a digital surface model (DSM), using the emergent structure from motion (SfM) techniques and open software. The georeferencing of the DSM is performed based on estimated camera position or using ground control points (GCPs).

  17. U.S. Geological Survey library classification system

    USGS Publications Warehouse

    Sasscer, R. Scott

    1992-01-01

    The U.S. Geological Survey Library classification system has been designed for earth science libraries. It is a tool for assigning call numbers to earth science and allied pure science materials in order to collect these materials into related subject groups on the library shelves and arrange them alphabetically by author and title. The classification can be used as a retrieval system to access materials through the subject and geographic numbers. The classification scheme has been developed over the years since 1904 to meet the ever-changing needs of increased specialization and the development of new areas of research in the earth sciences. The system contains seven schedules: * Subject schedule * Geological survey schedule * Earth science periodical schedule * Government document periodical schedule * General science periodical schedule * Earth science map schedule * Geographic schedule Introduction provides detailed instructions on the construction of call numbers for works falling into the framework of the classification schedules. The tables following the introduction can be quickly accessed through the use of the newly expanded subject index. The purpose of this publication is to provide the earth science community with a classification and retrieval system for earth science materials, to offer sufficient explanation of its structure and use, and to enable library staff and clientele to classify or access research materials in a library collection.

  18. Preliminary characterization of risks in the nuclear waste management system based on information in the literature

    SciTech Connect

    Daling, P.M.; Rhoads, R.E.; Van Luick, A.E.; Fecht, B.A.; Nilson, S.A.; Sevigny, N.L.; Armstrong, G.R.; Hill, D.H.; Rowe, M.; Stern, E.

    1992-01-01

    This document presents preliminary information on the radiological and nonradiological risks in the nuclear waste management system. The objective of the study was to (1) review the literature containing information on risks in the nuclear waste management system and (2) use this information to develop preliminary estimates of the potential magnitude of these risks. Information was collected on a broad range of risk categories to assist the US Department of Energy (DOE) in communicating information about the risks in the waste management systems. The study examined all of the portions of the nuclear waste management system currently expected to be developed by the DOE. The scope of this document includes the potential repository, the integral MRS facility, and the transportation system that supports the potential repository and the MRS facility. Relevant literature was reviewed for several potential repository sites and geologic media. A wide range of ``risk categories`` are addressed in this report: (1) public and occupational risks from accidents that could release radiological materials, (2) public and occupational radiation exposure resulting from routine operations, (3) public and occupational risks from accidents involving hazards other than radioactive materials, and (4) public and occupational risks from exposure to nonradioactive hazardous materials during routine operations. The report is intended to provide a broad spectrum of risk-related information about the waste management system. This information is intended to be helpful for planning future studies.

  19. Preliminary design-lift/cruise fan research and technology airplane flight control system

    NASA Technical Reports Server (NTRS)

    Gotlieb, P.; Lewis, G. E.; Little, L. J.

    1976-01-01

    This report presents the preliminary design of a stability augmentation system for a NASA V/STOL research and technology airplane. This stability augmentation system is postulated as the simplest system that meets handling qualities levels for research and technology missions flown by NASA test pilots. The airplane studied in this report is a T-39 fitted with tilting lift/cruise fan nacelles and a nose fan. The propulsion system features a shaft interconnecting the three variable pitch fans and three power plants. The mathematical modeling is based on pre-wind tunnel test estimated data. The selected stability augmentation system uses variable gains scheduled with airspeed. Failure analysis of the system illustrates the benign effect of engine failure. Airplane rate sensor failure must be solved with redundancy.

  20. Geothermal Potential of the Siǧacik Gulf (Seferihisar) and Preliminary investigations with Seismic and Magnetic Surveys

    NASA Astrophysics Data System (ADS)

    Bakak, Özde; Özel, Erdeniz; Ergün, Mustafa

    2015-04-01

    The Aegean region, including both W. Turkey and Central Greece, is one of the world's most rapidly-deforming regions of continental crust and has a seismic rate is exceptional on a world scale. SW Turkey is one of the most rapidly extending regions in the world where the extension appears to have commenced in middle or late Miocene time. Paleomagnetic work in W Turkey and Aegean islands has revealed the horizontal rotation of some crustal blocks. In W Turkey clockwise rotation on Karaburun peninsula west of Izmir by 44° in the last few Ma is detected, and anticlockwise rotation of 37° for the Seferihisar region. The area of W Turkey and the Aegean islands has very strong geothermal gradient in the world scale. Sığacık Gulf is located on south of Karaburun Peninsula, and it is restricted by two important ridges as Karaburun and Seferihisar Ridges. Recent geological and geophysical studies suggested that this area is both E-W trending normal and NE-SW trending strike-slip faulting caused deformation. The Seferihisar earthquake series were occurred here during 17-20 October 2005. For investigation of geothermal potential and hot water outlets on the seafloor, shallow seismic and magnetic surveys are preferred, which were carried out onboard Dokuz Eylül-1 vessel belongs to Dokuz Eylül University, in 2011. Approximately 250km seismic reflection data was collected along 27 lines. During seismic method used Sparker system which has 1 channel and 12 hydrophone with 17 m long streamer, as a seismic source used SIG Seismic Marine ELC 80 (4 kV & 3.2 KV DC). Seismic data processing (band pass filter, bottom mute, top mute, true amplitude recovery, time migration) was made using Promax program in the Seismic Laboratory in the Institute of Marine Science and Technology. The basement topography map was prepared using Kingdom Suite program drawing seabed line on these sections. Sea floor topography changes between 30-120 m, and this increases towards Ikaria Basin

  1. Bifurcation and chaos in power systems: A survey. Final report

    SciTech Connect

    Varaiya, P.; Wu, F.; Chiang, H.D.

    1992-08-01

    The literature dealing with bifurcation and chaos in electric power systems is surveyed. A brief discussion of relevant mathematical concepts and results is included in order to make the presentation self-contained and readily accessible. The objective is to determine the extent and significance of power system behavior that can be understood by dynamic models exhibiting bifurcation and chaotic motion. Bifurcation denotes a qualitative change in system behavior. The study is divided into three parts dealing with static bifurcations, Hopf bifurcations, and chaos. Static bifurcation occurs when two or more equilibrium points coincide. Hopf bifurcation occurs when a periodic oscillation emerges from a stable equilibrium. These are both examples of local bifurcation - they are determined by the system behavior in a neighborhood of the equilibrium. Chaos emerges from a global bifurcation - a non-local change in the phase portrait of tile system. The following conclusions are reached. Even the simplest models of power systems exhibit both local and global bifurcations. Local bifurcations occur because power flow equations have multiple solutions. In models that only incorporate real power flow, the capacity of transmission systems is so large that local bifurcations although present are unlikely to be practically significant. However, in models where voltage is determined by reactive power flows, local bifurcations can dramatically shrink the stability region. These bifurcations may explain ``voltage collapse``. The simplest models also exhibit chaotic behavior. However, for analytical convenience, chaos has mostly been investigated in systems with unrealistic parameter values.

  2. Bifurcation and chaos in power systems: A survey

    SciTech Connect

    Varaiya, P.; Wu, F. . Dept. of Electrical Engineering and Computer Sciences); Chiang, H.D. . School of Electrical Engineering)

    1992-08-01

    The literature dealing with bifurcation and chaos in electric power systems is surveyed. A brief discussion of relevant mathematical concepts and results is included in order to make the presentation self-contained and readily accessible. The objective is to determine the extent and significance of power system behavior that can be understood by dynamic models exhibiting bifurcation and chaotic motion. Bifurcation denotes a qualitative change in system behavior. The study is divided into three parts dealing with static bifurcations, Hopf bifurcations, and chaos. Static bifurcation occurs when two or more equilibrium points coincide. Hopf bifurcation occurs when a periodic oscillation emerges from a stable equilibrium. These are both examples of local bifurcation - they are determined by the system behavior in a neighborhood of the equilibrium. Chaos emerges from a global bifurcation - a non-local change in the phase portrait of tile system. The following conclusions are reached. Even the simplest models of power systems exhibit both local and global bifurcations. Local bifurcations occur because power flow equations have multiple solutions. In models that only incorporate real power flow, the capacity of transmission systems is so large that local bifurcations although present are unlikely to be practically significant. However, in models where voltage is determined by reactive power flows, local bifurcations can dramatically shrink the stability region. These bifurcations may explain voltage collapse''. The simplest models also exhibit chaotic behavior. However, for analytical convenience, chaos has mostly been investigated in systems with unrealistic parameter values.

  3. A survey of advanced battery systems for space applications

    NASA Technical Reports Server (NTRS)

    Attia, Alan I.

    1989-01-01

    The results of a survey on advanced secondary battery systems for space applications are presented. The objectives were: to identify advanced battery systems capable of meeting the requirements of various types of space missions, with significant advantages over currently available batteries, to obtain an accurate estimate of the anticipated improvements of these advanced systems, and to obtain a consensus for the selection of systems most likely to yield the desired improvements. Few advanced systems are likely to exceed a specific energy of 150 Wh/kg and meet the additional requirements of safety and reliability within the next 15 years. The few that have this potential are: (1) regenerative fuel cells, both alkaline and solid polymer electrolyte (SPE) types for large power systems; (2) lithium-intercalatable cathodes, particularly the metal ozides intercalatable cathodes (MnO2 or CoO2), with applications limited to small spacecrafts requiring limited cycle life and low power levels; (3) lithium molten salt systems (e.g., LiAl-FeS2); and (4) Na/beta Alumina/Sulfur or metal chlorides cells. Likely technological advances that would enhance the performance of all the above systems are also identified, in particular: improved bifunctional oxygen electrodes; improved manufacturing technology for thin film lithium electrodes in combination with polymeric electrolytes; improved seals for the lithium molten salt cells; and improved ceramics for sodium/solid electrolyte cells.

  4. Pipe Explorer{trademark} surveying system. Innovative technology summary report

    SciTech Connect

    Not Available

    1999-06-01

    The US Department of Energy`s (DOE) Chicago Operations Office and the DOE`s Federal Energy Technology Center (FETC) developed a Large Scale Demonstration Project (LSDP) at the Chicago Pile-5 Research Reactor (CP-5) at Argonne National Laboratory-East (ANL). The objective of the LSDP is to demonstrate potentially beneficial decontamination and decommissioning (D and D) technologies in comparison with current baseline technologies. The Pipe Explorer{trademark} system was developed by Science and Engineering Associates, Inc. (SEA), Albuquerque, NM as a deployment method for transporting a variety of survey tools into pipes and ducts. Tools available for use with the system include alpha, beta and gamma radiation detectors; video cameras; and pipe locator beacons. Different versions of this technology have been demonstrated at three other sites; results of these demonstrations are provided in an earlier Innovative Technology Summary Report. As part of a D and D project, characterization radiological contamination inside piping systems is necessary before pipes can be recycled, remediated or disposed. This is usually done manually by surveying over the outside of the piping only, with limited effectiveness and risk of worker exposure. The pipe must be accessible to workers, and embedded pipes in concrete or in the ground would have to be excavated at high cost and risk of exposure to workers. The advantage of the Pipe Explorer is its ability to perform in-situ characterization of pipe internals.

  5. Exploring with PAM: Prospecting ANTS Missions for Solar System Surveys

    NASA Technical Reports Server (NTRS)

    Clark, P. E.; Rilee, M. L.; Curtis, S. A.

    2003-01-01

    ANTS (Autonomous Nano-Technology Swarm), a large (1000 member) swarm of nano to picoclass (10 to 1 kg) totally autonomous spacecraft, are being developed as a NASA advanced mission concept. ANTS, based on a hierarchical insect social order, use an evolvable, self-similar, hierarchical neural system in which individual spacecraft represent the highest level nodes. ANTS uses swarm intelligence attained through collective, cooperative interactions of the nodes at all levels of the system. At the highest levels this can take the form of cooperative, collective behavior among the individual spacecraft in a very large constellation. The ANTS neural architecture is designed for totally autonomous operation of complex systems including spacecraft constellations. The ANTS (Autonomous Nano Technology Swarm) concept has a number of possible applications. A version of ANTS designed for surveying and determining the resource potential of the asteroid belt, called PAM (Prospecting ANTS Mission), is examined here.

  6. Satellite emission radio interferometric earth surveying series - GPS geodetic system

    NASA Technical Reports Server (NTRS)

    Macdoran, P. F.

    1979-01-01

    A concept called SERIES (satellite emissions radio interferometric earth surveying) which makes use of GPS (global positioning system) radio transmissions without any satellite modifications, is described. Through the use of very long baseline interferometry (VLBI) and its calibration methods, 0.5 to 3 cm three dimensional baseline accuracy can be achieved over distances of 2 to 200 km respectively, with only 2 hours of on-site data acquisition. Attention is given to such areas as: the radio flux equivalent of GPS transmissions, synthesized delay precision, transmission and frequency subsystem requirements, tropospheric and ionospheric errors. Applications covered include geodesy and seismic tectonics.

  7. Reference networks (Control surveys). [Geodetic systems for earth crustal movement monitoring

    SciTech Connect

    Strange, W.E.; Zilkoski, D.B. )

    1991-01-01

    Control surveying activities of the National Geodetic Survey are reported for the 1987-1990 time period. The report is divided into two parts: horizontal control and vertical control. Particular attention is given to the North American Datum of 1983, high accuracy reference networks, the Global Positioning System and vertical control, vertical field surveys, and special survey projects. 44 refs.

  8. Preliminary design of an advanced Stirling system for terrestrial solar energy conversion

    NASA Astrophysics Data System (ADS)

    White, M. A.; Noble, J. E.; Emigh, S. G.; Ross, B. A.; Lehmann, G. A.

    A preliminary design was generated for an advanced Stirling conversion system (ASCS) that will be capable of delivering about 25 kW of electric power to an electric utility grid. Stirling engines are being evaluated for terrestrial solar applications. A two-year task to complete detailed design, fabrication, assembly and testing of an ASCS prototype began in April, 1990. The ASCS is designed to deliver maximum power per year over a range of solar inputs with a design life of 30 years (60,000 h). The ACSC has a long-term cost goal of about $450 per kilowatt, exclusive of the 11-m parabolic dish concentrator. The proposed system includes a Stirling engine with high-pressure hydraulic output, coupled with a bent axis variable displacement hydraulic motor and a rotary induction generator. The major thrusts of the preliminary design are described, including material selection for the hot-end components, heat transport system (reflux pool boiler) design, system thermal response, improved manufacturability, FMECA/FTA analysis, updated manufacturing cost estimate, and predicted system performance.

  9. Preliminary design of an advanced Stirling system for terrestrial solar energy conversion

    NASA Technical Reports Server (NTRS)

    White, M. A.; Noble, J. E.; Emigh, S. G.; Ross, B. A.; Lehmann, G. A.

    1990-01-01

    A preliminary design was generated for an advanced Stirling conversion system (ASCS) that will be capable of delivering about 25 kW of electric power to an electric utility grid. Stirling engines are being evaluated for terrestrial solar applications. A two-year task to complete detailed design, fabrication, assembly and testing of an ASCS prototype began in April, 1990. The ASCS is designed to deliver maximum power per year over a range of solar inputs with a design life of 30 years (60,000 h). The ACSC has a long-term cost goal of about $450 per kilowatt, exclusive of the 11-m parabolic dish concentrator. The proposed system includes a Stirling engine with high-pressure hydraulic output, coupled with a bent axis variable displacement hydraulic motor and a rotary induction generator. The major thrusts of the preliminary design are described, including material selection for the hot-end components, heat transport system (reflux pool boiler) design, system thermal response, improved manufacturability, FMECA/FTA analysis, updated manufacturing cost estimate, and predicted system performance.

  10. Preliminary level 2 specification for the nested, fixed-depth sampling system

    SciTech Connect

    BOGER, R.M.

    1999-02-08

    This preliminary Level 2 Component Specification establishes the performance, design, development, and test requirements for the in-tank sampling system which will support the BNFL contract in the final disposal of Hanford's High Level Wastes (HLW) and Low Activity Wastes (LAW). The PHMC will provide Low Activity Wastes (LAW) tank wastes for final treatment by BNFL from double-shell feed tanks. Concerns about the inability of the baseline ''grab'' sampling to provide large volume samples within time constraints has led to the development of a nested, fixed-depth sampling system. This sampling system will provide large volume? representative samples without the environmental, radiation exposure, and sample volume Impacts of the current base-line ''grab'' sampling method. This preliminary Level 2 Component Specification is not a general specification for tank sampling, but is based on a ''record of decision'', AGA (HNF-SD-TWR-AGA-001 ), the System Specification for the Double Shell Tank System (HNF-SD-WM-TRD-O07), and the BNFL privatization contract.

  11. Blade system design studies volume II : preliminary blade designs and recommended test matrix.

    SciTech Connect

    Griffin, Dayton A.

    2004-06-01

    As part of the U.S. Department of Energy's Wind Partnerships for Advanced Component Technologies (WindPACT) program, Global Energy Concepts, LLC is performing a Blade System Design Study (BSDS) concerning innovations in materials, processes and structural configurations for application to wind turbine blades in the multi-megawatt range. The BSDS Volume I project report addresses issues and constraints identified to scaling conventional blade designs to the megawatt size range, and evaluated candidate materials, manufacturing and design innovations for overcoming and improving large blade economics. The current report (Volume II), presents additional discussion of materials and manufacturing issues for large blades, including a summary of current trends in commercial blade manufacturing. Specifications are then developed to guide the preliminary design of MW-scale blades. Using preliminary design calculations for a 3.0 MW blade, parametric analyses are performed to quantify the potential benefits in stiffness and decreased gravity loading by replacement of a baseline fiberglass spar with carbon-fiberglass hybrid material. Complete preliminary designs are then presented for 3.0 MW and 5.0 MW blades that incorporate fiberglass-to-carbon transitions at mid-span. Based on analysis of these designs, technical issues are identified and discussed. Finally, recommendations are made for composites testing under Part I1 of the BSDS, and the initial planned test matrix for that program is presented.

  12. Development of a solar-powered residential air conditioner: System optimization preliminary specification

    NASA Technical Reports Server (NTRS)

    Rousseau, J.; Hwang, K. C.

    1975-01-01

    Investigations aimed at the optimization of a baseline Rankine cycle solar powered air conditioner and the development of a preliminary system specification were conducted. Efforts encompassed the following: (1) investigations of the use of recuperators/regenerators to enhance the performance of the baseline system, (2) development of an off-design computer program for system performance prediction, (3) optimization of the turbocompressor design to cover a broad range of conditions and permit operation at low heat source water temperatures, (4) generation of parametric data describing system performance (COP and capacity), (5) development and evaluation of candidate system augmentation concepts and selection of the optimum approach, (6) generation of auxiliary power requirement data, (7) development of a complete solar collector-thermal storage-air conditioner computer program, (8) evaluation of the baseline Rankine air conditioner over a five day period simulating the NASA solar house operation, and (9) evaluation of the air conditioner as a heat pump.

  13. A STUDY ON REASONS OF ERRORS OF OLD SURVEY MAPS IN CADASTRAL SYSTEM

    NASA Astrophysics Data System (ADS)

    Yanase, Norihiko

    This paper explicates sources on survey map errors which were made in 19th century. The present cadastral system stands on registers and survey maps which were compiled to change the land taxation system in the Meiji era. Many Japanese may recognize the reasons why poor survey technique by farmers, too long measure to avoid heavy tax, careless official check and other deception made such errors of acreage from several to more than ten percent of area in survey maps. The author would like to maintain that such errors, called nawa-nobi, were lawful in accordance with the then survey regulation because of results to analyze old survey regulations, history of making maps and studies of cadastral system. In addition to, a kind of survey maps' errors should be pointed out a reason why the easy subdivision system which could approve without real survey and disposal of state property with inadequate survey.

  14. Survey of health-hazard control systems for formaldehyde-production facilities. summary report

    SciTech Connect

    Dunn, D.W.; Hedley, W.H.; Johnson, M.L.; Toy, H.D.; Wright, A.J.

    1984-09-01

    The principal objective of the study was to survey the health hazard control systems used in the formaldehyde production industry. Preliminary visits were made to 11 formaldehyde production facilities. One week on/site visits were made to four facilities. All of the personal and area air quality samples taken indicated that the operators were exposed to formaldehyde (50000) at lower concentrations than the OSHA permissible exposure limit (PEL) of 3 parts per million. It was noted that the operator exposure when loading a rail car or tank truck where loading is not provided with local exhaust ventilation control could exceed OSHA limits, depending on weather conditions such as wind direction and speed. Methanol (67561) exposures also did not exceed the PEL of 200 parts per million. The following engineering controls were found to be effective: double or single mechanical seals on pumps; reuse of absorber emissions; purge collection systems; water scrubber on storage tank emissions; water scrubber on loading ventilation system; automatic loading; condensing loop on methanol storage tank emissions; and enclosed process.

  15. A Survey of Wireless Communications for the Electric Power System

    SciTech Connect

    Akyol, Bora A.; Kirkham, Harold; Clements, Samuel L.; Hadley, Mark D.

    2010-01-27

    A key mission of the U.S. Department of Energy (DOE) Office of Electricity Delivery and Energy Reliability (OE) is to enhance the security and reliability of the nation’s energy infrastructure. Improving the security of control systems, which enable the automated control of our energy production and distribution, is critical for protecting the energy infrastructure and the integral function that it serves in our lives. The DOE-OE Control Systems Security Program provides research and development to help the energy industry actively pursue advanced security solutions for control systems. The focus of this report is analyzing how, where, and what type of wireless communications are suitable for deployment in the electric power system and to inform implementers of their options in wireless technologies. The discussions in this report are applicable to enhancing both the communications infrastructure of the current electric power system and new smart system deployments. The work described in this report includes a survey of the following wireless technologies: • IEEE 802.16 d and e (WiMAX) • IEEE 802.11 (Wi-Fi) family of a, b, g, n, and s • Wireless sensor protocols that use parts of the IEEE 802.15.4 specification: WirelessHART, International Society of Automation (ISA) 100.11a, and Zigbee • The 2, 3, and 4 generation (G )cellular technologies of GPRS/EDGE/1xRTT, HSPA/EVDO, and Long-Term Evolution (LTE)/HSPA+UMTS.

  16. System Architecture of the Dark Energy Survey Camera Readout Electronics

    SciTech Connect

    Shaw, Theresa; Ballester, Otger; Cardiel-Sas, Laia; Castilla, Javier; Chappa, Steve; de Vicente, Juan; Holm, Scott; Huffman, Dave; Kozlovsky, Mark; Martinez, Gustavo; Moore, Todd; /Madrid, CIEMAT /Fermilab /Illinois U., Urbana /Fermilab

    2010-05-27

    The Dark Energy Survey makes use of a new camera, the Dark Energy Camera (DECam). DECam will be installed in the Blanco 4M telescope at Cerro Tololo Inter-American Observatory (CTIO). DECam is presently under construction and is expected to be ready for observations in the fall of 2011. The focal plane will make use of 62 2Kx4K and 12 2kx2k fully depleted Charge-Coupled Devices (CCDs) for guiding, alignment and focus. This paper will describe design considerations of the system; including, the entire signal path used to read out the CCDs, the development of a custom crate and backplane, the overall grounding scheme and early results of system tests.

  17. Computer-Aided Diagnostic System For Mass Survey Chest Images

    NASA Astrophysics Data System (ADS)

    Yasuda, Yoshizumi; Kinoshita, Yasuhiro; Emori, Yasufumi; Yoshimura, Hitoshi

    1988-06-01

    In order to support screening of chest radiographs on mass survey, a computer-aided diagnostic system that automatically detects abnormality of candidate images using a digital image analysis technique has been developed. Extracting boundary lines of lung fields and examining their shapes allowed various kind of abnormalities to be detected. Correction and expansion were facilitated by describing the system control, image analysis control and judgement of abnormality in the rule type programing language. In the experiments using typical samples of student's radiograms, good results were obtained for the detection of abnormal shape of lung field, cardiac hypertrophy and scoliosis. As for the detection of diaphragmatic abnormality, relatively good results were obtained but further improvements will be necessary.

  18. A survey of artificial immune system based intrusion detection.

    PubMed

    Yang, Hua; Li, Tao; Hu, Xinlei; Wang, Feng; Zou, Yang

    2014-01-01

    In the area of computer security, Intrusion Detection (ID) is a mechanism that attempts to discover abnormal access to computers by analyzing various interactions. There is a lot of literature about ID, but this study only surveys the approaches based on Artificial Immune System (AIS). The use of AIS in ID is an appealing concept in current techniques. This paper summarizes AIS based ID methods from a new view point; moreover, a framework is proposed for the design of AIS based ID Systems (IDSs). This framework is analyzed and discussed based on three core aspects: antibody/antigen encoding, generation algorithm, and evolution mode. Then we collate the commonly used algorithms, their implementation characteristics, and the development of IDSs into this framework. Finally, some of the future challenges in this area are also highlighted. PMID:24790549

  19. A Survey of Artificial Immune System Based Intrusion Detection

    PubMed Central

    Li, Tao; Hu, Xinlei; Wang, Feng; Zou, Yang

    2014-01-01

    In the area of computer security, Intrusion Detection (ID) is a mechanism that attempts to discover abnormal access to computers by analyzing various interactions. There is a lot of literature about ID, but this study only surveys the approaches based on Artificial Immune System (AIS). The use of AIS in ID is an appealing concept in current techniques. This paper summarizes AIS based ID methods from a new view point; moreover, a framework is proposed for the design of AIS based ID Systems (IDSs). This framework is analyzed and discussed based on three core aspects: antibody/antigen encoding, generation algorithm, and evolution mode. Then we collate the commonly used algorithms, their implementation characteristics, and the development of IDSs into this framework. Finally, some of the future challenges in this area are also highlighted. PMID:24790549

  20. Preliminary Study on Establishing the New System of Assessment and Evaluation Of "Athletic Physiology"

    ERIC Educational Resources Information Center

    Qian, Liu

    2012-01-01

    In the light of the problems existing in assessment of the course of "athletic physiology" in universities at present, this article makes reflections upon the assessment mode of students for this course and takes a general survey on development of the evaluation system by comprehensively employing both the quantitative method and…

  1. Energy efficient engine: Flight propulsion system, preliminary analysis and design update

    NASA Technical Reports Server (NTRS)

    Stearns, E. M.

    1982-01-01

    The preliminary design of General Electric's Energy Efficient Engine (E3) was reported in detail in 1980. Since then, the design has been refined and the components have been rig-tested. The changes which have occurred in the engine and a reassessment of the economic payoff are presented in this report. All goals for efficiency, environmental considerations, and economic payoff are being met. The E3 Flight Propulsion System has 14.9% lower sfc than a CF6-50C. It provides a 7.1% reduction in direct operating cost for a short haul domestic transport and 14.5% reduction for an international long distance transport.

  2. A preliminary analysis of advanced life support systems for manned Mars missions

    NASA Technical Reports Server (NTRS)

    Wercinski, Paul F.; Nishioka, Kenji

    1990-01-01

    This paper outlines the key parameters of the manned mission to Mars and presents some top-level requirements, issues, and constraints associated with a manned Mars mission that impact the life support system (LSS). Results are presented of a preliminary analysis for advanced LSSs based on physical/chemical reclamation processes, using as a baseline for the analysis the mission profile of a Split-Sprint class mission for an arrival date at Mars in the year 2009. Special attention is given to the potential cost savings as measured by reducing Mars spacecraft mass in LEO.

  3. A Preliminary Study on the Possibility of Using Ultrasound in Driver Assistance Systems

    NASA Astrophysics Data System (ADS)

    Takahashi, Hiroshi; Honda, Hirohiko

    This paper presents a preliminary study on the possibility of using ultrasound in driver assistance systems. Subjects' lap time in a driving video game was measured as an index of their performance of driving operations under acoustic conditions with and without an ultrasound signal at 23kHz, 70dB. The results show that the performance characteristics of the subjects changed when the ultrasound signal was presented. Ultrasound signal tends to concentrate on handling the vehicle and decreasing an attention to check the over speed driving, as a second task. We prove the possibility to apply ultrasound signal to control operator's attention and behavior.

  4. Energy efficient engine flight propulsion system preliminary analysis and design report

    NASA Technical Reports Server (NTRS)

    Gardner, W. B.

    1979-01-01

    A flight propulsion system preliminary design was established that meets the program goals of at least a 12 percent reduction in thrust specific fuel consumption, at least a five percent reduction in direct operating cost, and one-half the performance deterioration rate of the most efficient current commercial engines. The engine provides a high probability of meeting the 1978 noise rule goal. Smoke and gaseous emissions defined by the EPA proposed standards for engines newly certified after 1 January 1981 are met with the exception of NOx, despite incorporation of all known NOx reduction technology.

  5. Preliminary Concept of Operations for a Global Cylinder Identification and Monitoring System

    SciTech Connect

    Whitaker, J. M.; White-Horton, J. L.; Morgan, J. B.

    2013-08-01

    This report describes a preliminary concept of operations for a Global Cylinder Identification and Monitoring System that could improve the efficiency of the International Atomic Energy Agency (IAEA) in conducting its current inspection activities and could provide a capability to substantially increase its ability to detect credible diversion scenarios and undeclared production pathways involving UF6 cylinders. There exist concerns that a proliferant State with access to enrichment technology could obtain a cylinder containing natural or low-enriched uranium hexafluoride (UF6) and produce a significant quantity (SQ)1 of highly enriched uranium in as little as 30 days. The National Nuclear Security Administration (NNSA) through the Next Generation Safeguards Initiative sponsored a multi-laboratory team to develop an integrated system that provides for detecting scenarios involving 1) diverting an entire declared cylinder for enrichment at a clandestine facility, 2) misusing a declared cylinder at a safeguarded facility, and 3) using an undeclared cylinder at a safeguarded facility. An important objective in developing this integrated system was to improve the timeliness for detecting the cylinder diversion and undeclared production scenarios. Developing this preliminary concept required in-depth analyses of current operational and safeguards practices at conversion, enrichment, and fuel fabrication facilities. The analyses evaluated the processing, movement, and storage of cylinders at the facilities; the movement of cylinders between facilities (including cylinder fabrication); and the misuse of safeguarded facilities.

  6. Use of the KineSpring system in the treatment of medial knee osteoarthritis: preliminary results

    PubMed Central

    MADONNA, VINCENZO; CONDELLO, VINCENZO; PIOVAN, GIANLUCA; SCREPIS, DANIELE; ZORZI, CLAUDIO

    2015-01-01

    Purpose the purpose of this study was to analyze our preliminary results obtained with the KineSpring system in patients suffering from medial compartment knee osteoarthritis (OA). Methods between September 2012 and May 2014, 53 patients underwent treatment with the KineSpring system. Patient self-assessment was performed pre-operatively and at 3, 6 and 12 months postoperatively, and included the KOOS, Tegner activity score, Lysholm functional knee score, VAS knee pain score, and IKDC score. Device- and procedure-related adverse events were recorded. Results mean KOOS subscales, except for the Sport/Recreation subscale at six months, improved over time. Mean WOMAC Pain and Function domains, Lysholm score, IKDC score and VAS knee pain score improved over the follow-up period and were significantly improved at 3, 6 and 12 months postoperatively compared to baseline. Mean Tegner score improved slightly over time. In 5 of the 53 (9.4%) patients re-operation was necessary. In 3 patients the device was removed due to infection (one case) or persistent knee pain (two cases). Surgical arthrolysis was performed in two patients. Conclusions in our preliminary experience, the KineSpring system gave good short-term clinical results. Level of evidence Level IV, therapeutic case series. PMID:26889469

  7. A survey of macromycete diversity at Los Alamos National Laboratory, Bandelier National Monument, and Los Alamos County; A preliminary report

    SciTech Connect

    Jarmie, N.; Rogers, F.J.

    1997-11-01

    The authors have completed a 5-year survey (1991--1995) of macromycetes found in Los Alamos County, Los Alamos National Laboratory, and Bandelier National Monument. The authors have compiled a database of 1,048 collections, their characteristics, and identifications. The database represents 123 (98%) genera and 175 (73%) species reliably identified. Issues of habitat loss, species extinction, and ecological relationships are addressed, and comparisons with other surveys are made. With this baseline information and modeling of this baseline data, one can begin to understand more about the fungal flora of the area.

  8. Waste Feed Delivery System Phase 1 Preliminary RAM Analysis [SEC 1 and 2

    SciTech Connect

    DYKES, A.A.

    2000-10-11

    This report presents the updated results of the preliminary reliability, availability, and maintainability (RAM) analysis of selected waste feed delivery (WFD) operations to be performed by the Tank Farm Contractor (TFC) during Phase I activities in support of the Waste Treatment and Immobilization Plant (WTP). For planning purposes, waste feed tanks are being divided into five classes in accordance with the type of waste in each tank and the activities required to retrieve, qualify, and transfer waste feed. This report reflects the baseline design and operating concept, as of the beginning of Fiscal Year 2000, for the delivery of feed from three of these classes, represented by source tanks 241-AN-102, 241-AZ-101 and 241-AN-105. The preliminary RAM analysis quantifies the potential schedule delay associated with operations and maintenance (OBM) field activities needed to accomplish these operations. The RAM analysis is preliminary because the system design, process definition, and activity planning are in a state of evolution. The results are being used to support the continuing development of an O&M Concept tailored to the unique requirements of the WFD Program, which is being documented in various volumes of the Waste Feed Delivery Technical Basis (Carlson. 1999, Rasmussen 1999, and Orme 2000). The waste feed provided to the WTP must: (1) meet limits for chemical and radioactive constituents based on pre-established compositional envelopes (i.e., feed quality); (2) be in acceptable quantities within a prescribed sequence to meet feed quantities; and (3) meet schedule requirements (i.e., feed timing). In the absence of new criteria related to acceptable schedule performance due to the termination of the TWRS Privatization Contract, the original criteria from the Tank Waste Remediation System (77443s) Privatization Contract (DOE 1998) will continue to be used for this analysis.

  9. Preliminary design study of an alternate heat source assembly for a Brayton isotope power system

    NASA Technical Reports Server (NTRS)

    Strumpf, H. J.

    1978-01-01

    Results are presented for a study of the preliminary design of an alternate heat source assembly (HSA) intended for use in the Brayton isotope power system (BIPS). The BIPS converts thermal energy emitted by a radioactive heat source into electrical energy by means of a closed Brayton cycle. A heat source heat exchanger configuration was selected and optimized. The design consists of a 10 turn helically wound Hastelloy X tube. Thermal analyses were performed for various operating conditions to ensure that post impact containment shell (PICS) temperatures remain within specified limits. These limits are essentially satisfied for all modes of operation except for the emergency cooling system for which the PICS temperatures are too high. Neon was found to be the best choice for a fill gas for auxiliary cooling system operation. Low cycle fatigue life, natural frequency, and dynamic loading requirements can be met with minor modifications to the existing HSA.

  10. Analysis and Preliminary Design of an Advanced Technology Transport Flight Control System

    NASA Technical Reports Server (NTRS)

    Frazzini, R.; Vaughn, D.

    1975-01-01

    The analysis and preliminary design of an advanced technology transport aircraft flight control system using avionics and flight control concepts appropriate to the 1980-1985 time period are discussed. Specifically, the techniques and requirements of the flight control system were established, a number of candidate configurations were defined, and an evaluation of these configurations was performed to establish a recommended approach. Candidate configurations based on redundant integration of various sensor types, computational methods, servo actuator arrangements and data-transfer techniques were defined to the functional module and piece-part level. Life-cycle costs, for the flight control configurations, as determined in an operational environment model for 200 aircraft over a 15-year service life, were the basis of the optimum configuration selection tradeoff. The recommended system concept is a quad digital computer configuration utilizing a small microprocessor for input/output control, a hexad skewed set of conventional sensors for body rate and body acceleration, and triple integrated actuators.

  11. Coalition readiness management system preliminary interoperability experiment (CReaMS PIE)

    NASA Astrophysics Data System (ADS)

    Clark, Peter; Ryan, Peter; Zalcman, Lucien; Robbie, Andrew

    2003-09-01

    The United States Navy (USN) has initiated the Coalition Readiness Management System (CReaMS) Initiative to enhance coalition warfighting readiness through advancing development of a team interoperability training and combined mission rehearsal capability. It integrates evolving cognitive team learning principles and processes with advanced technology innovations to produce an effective and efficient team learning environment. The JOint Air Navy Networking Environment (JOANNE) forms the Australian component of CReaMS. The ultimate goal is to link Australian Defence simulation systems with the USN Battle Force Tactical Training (BFTT) system to demonstrate and achieve coalition level warfare training in a synthetic battlespace. This paper discusses the initial Preliminary Interoperability Experiment (PIE) involving USN and Australian Defence establishments.

  12. Preliminary design requirements document for the initial single-shell tank retrieval system

    SciTech Connect

    Hertzel, J.S., Westinghouse Hanford

    1996-07-24

    The scope of this Preliminary Design Requirements Document is to identify and define the functions, with associated requirements, which must be performed to demonstrate and accomplish the initial single-shell tank saltcake retrieval from selected tanks. This document sets forth functions, requirements, performance requirements and design constraints necessary to begin conceptual design for the Initial Single-shell Tank Retrieval System. System and physical interfaces between the Initial Single-shell Tank Retrieval System project and the Tank Waste Remediation are identified. The constraints, performance requirements, and transfer of information and data across a technical interface will be documented in an Interface Control Document. The design requirements provided in this document will be augmented by additional detailed design to be documented by the project.

  13. Preliminary results on the use of linear discriminant analysis in the ARM continuous speech recognition system

    NASA Astrophysics Data System (ADS)

    Peeling, S. M.; Ponting, K. M.

    1991-12-01

    Linear discriminant analysis is used to generate speech data transformations. This transformed data is then used within the Airborne Reconnaissance Mission (ARM) continuous speech recognition system. The aim of the ARM project is accurate recognition of continuously spoken airborne reconnaissance reports using a speech recognition system based on phoneme level hidden Markov models. A fuller description of a linear discriminant analysis, which is applied to speaker dependent data in the ARM system, is given. Preliminary results are presented from experiments using transformed data alone and also in conjunction with one, or both, of the word transition penalties and variable frame rate analysis. Speaker dependent results are reported which are significantly better then the best obtained previously.

  14. A Preliminary Study/Survey for Demonstration Community Housing Programs for the Adult Mentally Retarded, Physically Handicapped and Mentally Ill.

    ERIC Educational Resources Information Center

    Coleman, Thomas W., Jr.; Hyman, Milton

    A study was conducted for the Michigan State Housing Development Authority to gather background data necessary to initiate prototype community housing for mentally and physically handicapped independent adults. In an extensive survey and analysis of the literature and existing facilities, the problem of mental retardation, including legislation…

  15. Predictors of Smoking and Smokeless Tobacco Use in College Students: A Preliminary Study Using Web-Based Survey Methodology

    ERIC Educational Resources Information Center

    Morrell, Holly E. R.; Cohen, Lee M.; Bacchi, Donna; West, Joel

    2005-01-01

    Cigarette smoking and smokeless tobacco (SLT) use are associated with numerous health hazards and economic costs, and rates of tobacco use have recently increased among young adults. In this study, the authors compared predictors of smoking and SLT use among college students (N = 21,410) from 13 Texas universities using a Web-based survey. Results…

  16. Tennesseans' Opinions Toward Higher Education and the University of Tennessee. 1974 Statewide Opinion Survey. Preliminary Report Number 1.

    ERIC Educational Resources Information Center

    Haskins, Jack B.

    The opinions of 533 Tennesseans were gathered in a survey conducted in late 1974. It was found that Tennesseans have somewhat more confidence in higher education than do Americans generally, with 43.7 percent saying they have great confidence, 46.5 percent saying they have some confidence, and 4.5 percent saying they have no confidence. The…

  17. Geotherm: the U.S. geological survey geothermal information system

    USGS Publications Warehouse

    Bliss, J.D.; Rapport, A.

    1983-01-01

    GEOTHERM is a comprehensive system of public databases and software used to store, locate, and evaluate information on the geology, geochemistry, and hydrology of geothermal systems. Three main databases address the general characteristics of geothermal wells and fields, and the chemical properties of geothermal fluids; the last database is currently the most active. System tasks are divided into four areas: (1) data acquisition and entry, involving data entry via word processors and magnetic tape; (2) quality assurance, including the criteria and standards handbook and front-end data-screening programs; (3) operation, involving database backups and information extraction; and (4) user assistance, preparation of such items as application programs, and a quarterly newsletter. The principal task of GEOTHERM is to provide information and research support for the conduct of national geothermal-resource assessments. The principal users of GEOTHERM are those involved with the Geothermal Research Program of the U.S. Geological Survey. Information in the system is available to the public on request. ?? 1983.

  18. Survey of Clostridium difficile infection surveillance systems in Europe, 2011.

    PubMed

    Kola, Axel; Wiuff, Camilla; Akerlund, Thomas; van Benthem, Birgit H; Coignard, Bruno; Lyytikäinen, Outi; Weitzel-Kage, Doris; Suetens, Carl; Wilcox, Mark H; Kuijper, Ed J; Gastmeier, Petra

    2016-07-21

    To develop a European surveillance protocol for Clostridium difficile infection (CDI), existing national CDI surveillance systems were assessed in 2011. A web-based electronic form was provided for all national coordinators of the European CDI Surveillance Network (ECDIS-Net). Of 35 national coordinators approached, 33 from 31 European countries replied. Surveillance of CDI was in place in 14 of the 31 countries, comprising 18 different nationwide systems. Three of 14 countries with CDI surveillance used public health notification of cases as the route of reporting, and in another three, reporting was limited to public health notification of cases of severe CDI. The CDI definitions published by the European Society of Clinical Microbiology and Infectious Diseases (ESCMID) and the European Centre for Disease Prevention and Control (ECDC) were widely used, but there were differing definitions to distinguish between community- and healthcare-associated cases. All CDI surveillance systems except one reported annual national CDI rates (calculated as number of cases per patient-days). Only four surveillance systems regularly integrated microbiological data (typing and susceptibility testing results). Surveillance methods varied considerably between countries, which emphasises the need for a harmonised European protocol to allow consistent monitoring of the CDI epidemiology at European level. The results of this survey were used to develop a harmonised EU-wide hospital-based CDI surveillance protocol. PMID:27469420

  19. Aerial EM Survey Reveals Groundwater Systems Beneath Taylor Valley, Antarctica

    NASA Astrophysics Data System (ADS)

    Dugan, H.; Mikucki, J.; Auken, E.; Tulaczyk, S. M.; Virginia, R. A.; Schamper, C.; Sørensen, K.; Doran, P. T.; Foley, N.

    2014-12-01

    The extent of groundwater and its potential habitability in the ice-free regions and along the coastal margins of Antarctica is poorly understood. Here we report on an airborne transient electromagnetic survey in Antarctica, which for the first time produced extensive imagery of subsurface resistivity in Taylor Valley, an ice-free margin of the Ross Sea. Wide zones of low subsurface resistivity were detected that are inconsistent with the typical high resistivity of glacier ice or dry permafrost. These results are interpreted as an indication that water, with sufficiently high solute content to remain unfrozen well below 0°C, temperatures considered within the range suitable for microbial life. The inferred subsurface brines are widespread and form two isolated groundwater systems: a near shore system, which extends from the ocean 18 km inland; and a sub-/proglacial system, which emanates from beneath Taylor Glacier into Lake Bonney and is associated with the discharge from Blood Falls. The brine networks in Taylor Valley challenge the notion that groundwater is negligible in regions of continuous permafrost, and signify the potential for a deep biosphere that is hydrologically and geochemically connected to the marine system and subglacial environments.

  20. Geotherm: the U.S. geological survey geothermal information system

    NASA Astrophysics Data System (ADS)

    Bliss, J. D.; Rapport, A.

    GEOTHERM is a comprehensive system of public databases and software used to store, locate, and evaluate information on the geology, geochemistry, and hydrology of geothermal systems. Three main databases address the general characteristics of geothermal wells and fields, and the chemical properties of geothermal fluids; the last database is currently the most active. System tasks are divided into four areas: (1) data acquisition and entry, involving data entry via word processors and magnetic tape; (2) quality assurance, including the criteria and standards handbook and front-end data-screening programs; (3) operation, involving database backups and information extraction; and (4) user assistance, preparation of such items as application programs, and a quarterly newsletter. The principal task of GEOTHERM is to provide information and research support for the conduct of national geothermal-resource assessments. The principal users of GEOTHERM are those involved with the Geothermal Research Program of the U.S. Geological Survey. Information in the system is available to the public on request.

  1. Direct-Drive Gas-Cooled Reactor Power System: Concept and Preliminary Testing

    NASA Technical Reports Server (NTRS)

    Wright, S. A.; Lipinski, R. J.; Godfroy, T. J.; Bragg-Sitton, S. M.; VanDyke, M. K.

    2002-01-01

    This paper describes the concept and preliminary component testing of a gas-cooled, UN-fueled, pin-type reactor which uses He/Xe gas that goes directly into a recuperated Brayton system to produce electricity for nuclear electric propulsion. This Direct-Drive Gas-Cooled Reactor (DDG) is designed to be subcritical under water or wet- sand immersion in case of a launch accident. Because the gas-cooled reactor can directly drive the Brayton turbomachinery, it is possible to configure the system such that there are no external surfaces or pressure boundaries that are refractory metal, even though the gas delivered to the turbine is 1144 K. The He/Xe gas mixture is a good heat transport medium when flowing, and a good insulator when stagnant. Judicious use of stagnant cavities as insulating regions allows transport of the 1144-K gas while keeping all external surfaces below 900 K. At this temperature super-alloys (Hastelloy or Inconel) can be used instead of refractory metals. Super-alloys reduce the technology risk because they are easier to fabricate than refractory metals, we have a much more extensive knowledge base on their characteristics, and, because they have a greater resistance to oxidation, system testing is eased. The system is also relatively simple in its design: no additional coolant pumps, heat exchanger, or freeze-thaw systems are required. Key to success of this concept is a good knowledge of the heat transfer between the fuel pins and the gas, as well as the pressure drop through the system. This paper describes preliminary testing to obtain this key information, as well as experience in demonstrating electrically heated testing of simulated reactor components.

  2. Preliminary design study of a lateral-directional control system using thrust vectoring

    NASA Technical Reports Server (NTRS)

    Lallman, F. J.

    1985-01-01

    A preliminary design of a lateral-directional control system for a fighter airplane capable of controlled operation at extreme angles of attack is developed. The subject airplane is representative of a modern twin-engine high-performance jet fighter, is equipped with ailerons, rudder, and independent horizontal-tail surfaces. Idealized bidirectional thrust-vectoring engine nozzles are appended to the mathematic model of the airplane to provide additional control moments. Optimal schedules for lateral and directional pseudo control variables are calculated. Use of pseudo controls results in coordinated operation of the aerodynamic and thrust-vectoring controls with minimum coupling between the lateral and directional airplane dynamics. Linear quadratic regulator designs are used to specify a preliminary flight control system to improve the stability and response characteristics of the airplane. Simulated responses to step pilot control inputs are stable and well behaved. For lateral stick deflections, peak stability axis roll rates are between 1.25 and 1.60 rad/sec over an angle-of-attack range of 10 deg to 70 deg. For rudder pedal deflections, the roll rates accompanying the sideslip responses can be arrested by small lateral stick motions.

  3. Preliminary Drill Sites

    DOE Data Explorer

    Lane, Michael

    2013-06-28

    Preliminary locations for intermediate depth temperature gradient holes and/or resource confirmation wells based on compilation of geological, geophysical and geochemical data prior to carrying out the DOE-funded reflection seismic survey.

  4. A study of meteor spectroscopy and physics from earth-orbit: A preliminary survey into ultraviolet meteor spectra

    NASA Technical Reports Server (NTRS)

    Meisel, D. D.

    1976-01-01

    Preliminary data required to extrapolate available meteor physics information (obtained in the photographic, visual and near ultraviolet spectral regions) into the middle and far ultraviolet are presented. Wavelength tables, telluric attenuation factors, meteor rates, and telluric airglow data are summarized in the context of near-earth observation vehicle parameters using moderate to low spectral resolution instrumentation. Considerable attenuation is given to the problem of meteor excitation temperatures since these are required to predict the strength of UV features. Relative line intensities are computed for an assumed chondritic composition. Features of greatest predicted intensities, the major problems in meteor physics, detectability of UV meteor events, complications of spacecraft motion, and UV instrumentation options are summarized.

  5. Preliminary Characterization of Organic Geochemistry in the Fly-Strickland River System, Papua New Guinea

    NASA Astrophysics Data System (ADS)

    Alin, S. R.; Aalto, R.; Remington, S. M.; Richey, J. E.

    2003-12-01

    The Fly-Strickland fluvial dispersal system comprises one of the largest river basins in tropical Oceania, ranking among the top 20 rivers in the world for water and sediment discharge. From the New Guinea highlands, these rivers flow >1000 km across lowland tropical floodplains to the Gulf of Papua, with an average annual depth of runoff 100 times that of the Amazon. Within the system, the Strickland has greater sediment discharge and a steeper gradient than the Fly, providing an opportunity to investigate biogeochemical differences associated with particulate flux. For eight lowland sites across the Fly-Strickland river system, we analyzed water and suspended sediment (SS) samples for an initial survey of various carbon cycle parameters. Both the Fly and Strickland Rivers were strongly supersaturated with carbon dioxide (2008-10,479 uatm CO2) and undersaturated with oxygen (1.10-5.48 mg/l O2), with the Fly having higher CO2 and lower O2 concentrations than the Strickland River. These pCO2 and O2 concentrations are comparable to and lower than (respectively) typical values in the Amazon. Measured Fly-Strickland alkalinity values fell in the range of 0.893-1.888 meq, and pH measurements were neutral to slightly alkaline (6.916-7.852). In a sample from a sediment-impoverished tributary from Lake Murray to the Strickland (Herbert R.), pH was neutral (7.060), and alkalinity and pCO2 had their lowest observed values at 0.234 meq and 1407 uatm, respectively. Nutrient concentrations were generally higher in the Strickland ([NO3]=3.36+/-0.69 uM, [PO4]=0.09+/-0.10 uM, and [Si(OH)4]=176.6+/-41.7 uM) than in the Fly River ([NO3]=1.09+/-0.04 uM, [PO4]=0.01+/-0.01 uM, and [Si(OH)4]=110.6+/-4.8 uM). NO3 and PO4 concentrations in the Fly-Strickland river system were lower than in the Amazon, and silicate was comparable. SS concentrations were higher in the Strickland than in the Fly (49.4-231.1 mg/l vs. 19.5-59.6 mg/l). Coarse particulates were organic-poor in the Fly and

  6. The Large Synoptic Survey Telescope project management control system

    NASA Astrophysics Data System (ADS)

    Kantor, Jeffrey P.

    2012-09-01

    The Large Synoptic Survey Telescope (LSST) program is jointly funded by the NSF, the DOE, and private institutions and donors. From an NSF funding standpoint, the LSST is a Major Research Equipment and Facilities (MREFC) project. The NSF funding process requires proposals and D&D reviews to include activity-based budgets and schedules; documented basis of estimates; risk-based contingency analysis; cost escalation and categorization. "Out-of-the box," the commercial tool Primavera P6 contains approximately 90% of the planning and estimating capability needed to satisfy R&D phase requirements, and it is customizable/configurable for remainder with relatively little effort. We describe the customization/configuration and use of Primavera for the LSST Project Management Control System (PMCS), assess our experience to date, and describe future directions. Examples in this paper are drawn from the LSST Data Management System (DMS), which is one of three main subsystems of the LSST and is funded by the NSF. By astronomy standards the LSST DMS is a large data management project, processing and archiving over 70 petabyes of image data, producing over 20 petabytes of catalogs annually, and generating 2 million transient alerts per night. Over the 6-year construction and commissioning phase, the DM project is estimated to require 600,000 hours of engineering effort. In total, the DMS cost is approximately 60% hardware/system software and 40% labor.

  7. Col-OSSOS: Colours of the Outer Solar System Origins Survey

    NASA Astrophysics Data System (ADS)

    Fraser, Wesley Cristopher; Bannister, Michele; Pike, Rosemary; Schwamb, Megan; Marrset, Michael; Kavelaars, JJ; Benecchi, Susan; Delsanti, Audrey; Guilbert-Lepoutre, Audrey; Parker, Alex; Peixinho, Nuno; Vernazza, Peirre; Wang, Shiang-Yu

    2015-11-01

    The surfaces of trans-Neptunian objects (TNOs) are poorly understood. Other than the large objects which exhibit signatures of various ices, very little has been discerned about the compositions of most TNOs. In recent years, some concrete knowledge about the distribution of surface colours of small TNOs has come to light. It is now generally accepted that small TNOs fall into at least three classes of object based on their surface colours and albedo. TNO surface type is also correlated with dynamical class, with certain types of TNO being found primarily in certain regions of the outer Solar System. This correlation presents the intriguing idea that the surfaces of TNOs contain information on more than composition, but as well hold the key to understanding the dynamical processes that lead to the giant planets violently dispersing the protoplanetesimal disk and populating the Kuiper Belt region. It is around this idea that the Col-OSSOS survey is predicated. This 4 year program which started in 2014B is simultaneously using the Gemini-North and Canada-France-Hawaii telescopes to gather near simultaneous u, g, r, and J spectral photometry of all targets in the Outer Solar System Origins Survey (OSSOS) brighter than r’=23.5 (~140 expected). The focus of Col-OSSOS is completeness and consistency, with the same SNR=25 being reached in all bands, for all targets brighter than our depth limit.Col-OSSOS will provide a combined compositional-dynamical map from which key hypotheses about the Solar System's cosmogony can be tested. For example, by mapping the fraction of TNOs with cold-classical like surface colours, we will be able to determine how much of the belt was populated by dynamical scattering versus sweep-up from Neptune. Further, we will be able to constrain the compositional homogeneity of the protoplanetesimal disk. The surfaces of TNOs must reflect that homogeneity; a heterogeneous disk will result in a clumpy colour distribution with many unique types

  8. Head-Up Auditory Displays for Traffic Collision Avoidance System Advisories: A Preliminary Investigation

    NASA Technical Reports Server (NTRS)

    Begault, Durand R.

    1993-01-01

    The advantage of a head-up auditory display was evaluated in a preliminary experiment designed to measure and compare the acquisition time for capturing visual targets under two auditory conditions: standard one-earpiece presentation and two-earpiece three-dimensional (3D) audio presentation. Twelve commercial airline crews were tested under full mission simulation conditions at the NASA-Ames Man-Vehicle Systems Research Facility advanced concepts flight simulator. Scenario software generated visual targets corresponding to aircraft that would activate a traffic collision avoidance system (TCAS) aural advisory; the spatial auditory position was linked to the visual position with 3D audio presentation. Results showed that crew members using a 3D auditory display acquired targets approximately 2.2 s faster than did crew members who used one-earpiece head- sets, but there was no significant difference in the number of targets acquired.

  9. Preliminary development and evaluation of an algae-based air regeneration system

    NASA Technical Reports Server (NTRS)

    Nienow, J. A.

    2000-01-01

    The potential of air regeneration system based on the growth of microalgae on the surface of porous ceramic tubes is evaluated. The algae have been maintained in the system for extended periods, up to 360 days. Preliminary measurements of the photosynthetic capacity have been made for Chlorella vulgaris (UTEX 259), Neospongiococcum punctatum (UTEX 786), Stichococcus sp., and Gloeocapsa sp. Under standard test conditions (photosynthetic photon flux approximately 66 micromoles m-2 s-1, initial CO2 concentration approximately 450 micromoles mol-1), mature tubes remove up to 0.2 micromoles of CO2 per tube per minute. The rate of removal increases with photon flux up to at least 225 micromoles m-2 s-1 (PPF); peak rates of 0.35 micromoles of CO2 per tube per minute have been achieved with Chlorella vulgaris. These rates correspond to between 120 and 210 micromoles of CO2 removed per square meter of projected area per minute.

  10. Preliminary digital control system design for the petite amateur Navy satellite (PANSAT)

    NASA Astrophysics Data System (ADS)

    Leu, David L.

    1994-03-01

    The Petite Amateur Navy Satellite (PANSAT) project was initiated to demonstrate the feasibility of a quick reaction, low-cost communications satellite incorporating digital communications and a store and forward memory area for the use of amateur radio operators interested in spread spectrum and packet communications. Designed to operate autonomously and under the guidance of a ground station located at the Naval Postgraduate School (NPS) in Monterey, California, it requires a reliable Digital Control System (DCS) to control operations while processing communications and telemetry. This thesis deals with a preliminary hardware design for the DCS and related subsystems. In addition to the design process, individual components were selected which were deemed suitable for the space environment while operating under project constraints of limited power and a desire to create a system using off-the-shelf devices capable of handling temperature and physical constraints equivalent to MIL-STD-883. Reliability, redundancy, and flexibility were requirements of the DCS design.

  11. Software tools and preliminary design of a control system for the 40m OAN radiotelescope

    NASA Astrophysics Data System (ADS)

    de Vicente, P.; Bolaño, R.

    2004-07-01

    The Observatorio Astronómico Nacional (OAN) is building a 40m radiotelescope in its facilities in Yebes (Spain) which will be delivered by April 2004. The servosystem will be controlled by an ACU (Antenna Control Unit), a real time computer running VxWorks which will be commanded from a remote computer (RCC) or from a local computer (LCC) which will act as console. We present the tools we have chosen to develop and use the control system for the RCC and the criteria followed for the choices we made. We also present a preliminary design of the control system on which we are currently working. The RCC will run a server which communicates with the ACU using sockets and with the clients, receivers and backends using OmniOrb, a free implementation of CORBA. Clients running Python will allow the users to control the antenna from any host connected to a LAN or a secure Internet connection.

  12. Development and Preliminary Evaluation of a Prototype of a Learning Electronic Medical Record System

    PubMed Central

    King, Andrew J.; Cooper, Gregory F.; Hochheiser, Harry; Clermont, Gilles; Visweswaran, Shyam

    2015-01-01

    Electronic medical records (EMRs) are capturing increasing amounts of data per patient. For clinicians to efficiently and accurately understand a patient’s clinical state, better ways are needed to determine when and how to display EMR data. We built a prototype system that records how physicians view EMR data, which we used to train models that predict which EMR data will be relevant in a given patient. We call this approach a Learning EMR (LEMR). A physician used the prototype to review 59 intensive care unit (ICU) patient cases. We used the data-access patterns from these cases to train logistic regression models that, when evaluated, had AUROC values as high as 0.92 and that averaged 0.73, supporting that the approach is promising. A preliminary usability study identified advantages of the system and a few concerns about implementation. Overall, 3 of 4 ICU physicians were enthusiastic about features of the prototype. PMID:26958296

  13. Preliminary results of the Deep Freeze 85 marine geologic and geophysical survey of the Antarctic Peninsula continental shelf and South Orkney Plateau

    SciTech Connect

    Anderson, J.B.; Bartek, L.; Griffith, T.; Herron, M.; Kennedy, D.; Singer, J.; Smith, M.

    1985-01-01

    Seismic profiles from the South Orkney Plateau show a relatively thick (>0.7 seconds), laminated sequence resting on block faulted acoustic basement and deformed strata. This represents the rifting of the plateau from the Antarctic Peninsula and subsequent pelagic sedimentation. A glacial erosional surface and associated glacial trough were identified on the platform, and possible basal till collected in at least one piston core. Seismic lines from the continental shelf north of the South Shetland Plateau show gently folded reflectors that have been truncated by a widespread erosional unconformity and probable moraines situated near the shelf edge. A line across the Bransfield Strait, a modern back-arc basin, shows the structural features of the basin and thick (>1.0 second) laminated sediments within the center of the basin. One of several deep channels which dissect the shelf was surveyed, but the origin of these features remains uncertain. Geophysical data and piston cores were acquired in several of the bays and fjords of the peninsula region. This is the first detailed survey of Antarctic bays and fjords. The preliminary results show striking differences in sedimentation between Antarctic fjords and those of Arctic and Subarctic regions, the most important difference being the limited role of meltwater runoff in the supply of sediment to Antarctic fjords.

  14. Preliminary environmental assessment for the Satellite Power System (SPS). Revision 1. Volume 2. Detailed assessment

    SciTech Connect

    Not Available

    1980-01-01

    The Department of Energy (DOE) is considering several options for generating electrical power to meet future energy needs. The satellite power system (SPS), one of these options, would collect solar energy through a system of satellites in space and transfer this energy to earth. A reference system has been described that would convert the energy to microwaves and transmit the microwave energy via directive antennas to large receiving/rectifying antennas (rectennas) located on the earth. At the rectennas, the microwave energy would be converted into electricity. The potential environmental impacts of constructing and operating the satellite power system are being assessed as a part of the Department of Energy's SPS Concept Development and Evaluation Program. This report is Revision I of the Preliminary Environmental Assessment for the Satellite Power System published in October 1978. It refines and extends the 1978 assessment and provides a basis for a 1980 revision that will guide and support DOE recommendations regarding future SPS development. This is Volume 2 of two volumes. It contains the technical detail suitable for peer review and integrates information appearing in documents referenced herein. The key environmental issues associated with the SPS concern human health and safety, ecosystems, climate, and electromagnetic systems interactions. In order to address these issues in an organized manner, five tasks are reported: (I) microwave-radiation health and ecological effects; (II) nonmicrowave health and ecological effectss; (III) atmospheric effects; (IV) effects on communication systems due to ionospheric disturbance; and (V) electromagnetic compatibility. (WHK)

  15. National Geothermal Data System: State Geological Survey Contributions to Date

    NASA Astrophysics Data System (ADS)

    Patten, K.; Allison, M. L.; Richard, S. M.; Clark, R.; Love, D.; Coleman, C.; Caudill, C.; Matti, J.; Musil, L.; Day, J.; Chen, G.

    2012-12-01

    In collaboration with the Association of American State Geologists the Arizona Geological Survey is leading the effort to bring legacy geothermal data to the U.S. Department of Energy's National Geothermal Data System (NGDS). NGDS is a national, sustainable, distributed, interoperable network of data and service (application) providers entering its final stages of development. Once completed the geothermal industry, the public, and policy makers will have access to consistent and reliable data, which in turn, reduces the amount of staff time devoted to finding, retrieving, integrating, and verifying information. With easier access to information, the high cost and risk of geothermal power projects (especially exploration drilling) is reduced. This presentation focuses on the scientific and data integration methodology as well as State Geological Survey contributions to date. The NGDS is built using the U.S. Geoscience Information Network (USGIN) data integration framework to promote interoperability across the Earth sciences community and with other emerging data integration and networking efforts. Core to the USGIN concept is that of data provenance; by allowing data providers to maintain and house their data. After concluding the second year of the project, we have nearly 800 datasets representing over 2 million data points from the state geological surveys. A new AASG specific search catalog based on popular internet search formats enables end users to more easily find and identify geothermal resources in a specific region. Sixteen states, including a consortium of Great Basin states, have initiated new field data collection for submission to the NGDS. The new field data includes data from at least 21 newly drilled thermal gradient holes in previously unexplored areas. Most of the datasets provided to the NGDS are being portrayed as Open Geospatial Consortium (OGC) Web Map Services (WMS) and Web Feature Services (WFS), meaning that the data is compatible with a

  16. Variability and Lightcurves Studies in the Outer Solar System Origins Survey

    NASA Astrophysics Data System (ADS)

    Benecchi, Susan D.; Chen, Ying-Tung; Schwamb, Meg; Wang, Shiang-Yu; Lehner, Matthew; Alexandersen, Mike

    2015-11-01

    Lightcurves provide a powerful mechanism for learning about the history of the collisional and/or gravitational processes acting on small bodies since the formation, and subsequent migration, of our solar nebula. At the extremes, they can provide constraints on the material properties (and interior structure) of individual objects and perhaps in quantity can provide information about their source populations. Our project consists of two datasets: (1) the Outer Solar System Origins Survey (OSSOS) discovery and recovery magnitudes, and (2) observations from a 6-hour pilot study on a subset of (17) OSSOS objects using the Subaru and Hyper Suprime-Cam (HSC) instrument. The OSSOS objects span a full range of sizes, from as large as several hundreds of km to as small as a few tens of km in diameter. Because of the telescope diameter and the wide field of view of HSC, we are able to obtain measurements on multiple objects covering a range of magnitudes with a single telescope pointing within the first two years following object discovery. The OSSOS survey is well calibrated photometrically and as such we use the very sparce sampling in the discovery and recovery magnitudes to identify which objects might have the largest amplitude lightcruves, indicating that they are likely elongated or in potentially interesting spin states. We then select the HSC fields containing these objects and the highest density of surrounding objects to obtain more densely sampled lightcurves. In this way we optimize the telescope time and the potential scientific return. We will present our analysis of the OSSOS dataset and some preliminary results from HSC.

  17. A Multimedia Interactive Education System for Prostate Cancer Patients: Development and Preliminary Evaluation

    PubMed Central

    Butz, Brian P

    2004-01-01

    Background A cancer diagnosis is highly distressing. Yet, to make informed treatment choices patients have to learn complicated disease and treatment information that is often fraught with medical and statistical terminology. Thus, patients need accurate and easy-to-understand information. Objective To introduce the development and preliminary evaluation through focus groups of a novel highly-interactive multimedia-education software program for patients diagnosed with localized prostate cancer. Methods The prostate interactive education system uses the metaphor of rooms in a virtual health center (ie, reception area, a library, physician offices, group meeting room) to organize information. Text information contained in the library is tailored to a person's information-seeking preference (ie, high versus low information seeker). We conducted a preliminary evaluation through 5 separate focus groups with prostate cancer survivors (N = 18) and their spouses (N = 15). Results Focus group results point to the timeliness and high acceptability of the software among the target audience. Results also underscore the importance of a guide or tutor who assists in navigating the program and who responds to queries to facilitate information retrieval. Conclusions Focus groups have established the validity of our approach and point to new directions to further enhance the user interface. PMID:15111269

  18. DeepSurveyCam--A Deep Ocean Optical Mapping System.

    PubMed

    Kwasnitschka, Tom; Köser, Kevin; Sticklus, Jan; Rothenbeck, Marcel; Weiß, Tim; Wenzlaff, Emanuel; Schoening, Timm; Triebe, Lars; Steinführer, Anja; Devey, Colin; Greinert, Jens

    2016-01-01

    Underwater photogrammetry and in particular systematic visual surveys of the deep sea are by far less developed than similar techniques on land or in space. The main challenges are the rough conditions with extremely high pressure, the accessibility of target areas (container and ship deployment of robust sensors, then diving for hours to the ocean floor), and the limitations of localization technologies (no GPS). The absence of natural light complicates energy budget considerations for deep diving flash-equipped drones. Refraction effects influence geometric image formation considerations with respect to field of view and focus, while attenuation and scattering degrade the radiometric image quality and limit the effective visibility. As an improvement on the stated issues, we present an AUV-based optical system intended for autonomous visual mapping of large areas of the seafloor (square kilometers) in up to 6000 m water depth. We compare it to existing systems and discuss tradeoffs such as resolution vs. mapped area and show results from a recent deployment with 90,000 mapped square meters of deep ocean floor. PMID:26828495

  19. DeepSurveyCam—A Deep Ocean Optical Mapping System

    PubMed Central

    Kwasnitschka, Tom; Köser, Kevin; Sticklus, Jan; Rothenbeck, Marcel; Weiß, Tim; Wenzlaff, Emanuel; Schoening, Timm; Triebe, Lars; Steinführer, Anja; Devey, Colin; Greinert, Jens

    2016-01-01

    Underwater photogrammetry and in particular systematic visual surveys of the deep sea are by far less developed than similar techniques on land or in space. The main challenges are the rough conditions with extremely high pressure, the accessibility of target areas (container and ship deployment of robust sensors, then diving for hours to the ocean floor), and the limitations of localization technologies (no GPS). The absence of natural light complicates energy budget considerations for deep diving flash-equipped drones. Refraction effects influence geometric image formation considerations with respect to field of view and focus, while attenuation and scattering degrade the radiometric image quality and limit the effective visibility. As an improvement on the stated issues, we present an AUV-based optical system intended for autonomous visual mapping of large areas of the seafloor (square kilometers) in up to 6000 m water depth. We compare it to existing systems and discuss tradeoffs such as resolution vs. mapped area and show results from a recent deployment with 90,000 mapped square meters of deep ocean floor. PMID:26828495

  20. A Survey of Overlooked Viral Infections in Biological Experiment Systems

    PubMed Central

    Wang, Yajing; Wang, Hui; Xu, Kunhan; Ni, Peixiang; Zhang, Huan; Ma, Jinmin; Yang, Huanming; Xu, Feng

    2014-01-01

    It is commonly accepted that there are many unknown viruses on the planet. For the known viruses, do we know their prevalence, even in our experimental systems? Here we report a virus survey using recently published small (s)RNA sequencing datasets. The sRNA reads were assembled and contigs were screened for virus homologues against the NCBI nucleotide (nt) database using the BLASTn program. To our surprise, approximately 30% (28 out of 94) of publications had highly scored viral sequences in their datasets. Among them, only two publications reported virus infections. Though viral vectors were used in some of the publications, virus sequences without any identifiable source appeared in more than 20 publications. By determining the distributions of viral reads and the antiviral RNA interference (RNAi) pathways using the sRNA profiles, we showed evidence that many of the viruses identified were indeed infecting and generated host RNAi responses. As virus infections affect many aspects of host molecular biology and metabolism, the presence and impact of viruses needs to be actively investigated in experimental systems. PMID:25144530

  1. A survey of overlooked viral infections in biological experiment systems.

    PubMed

    Wang, Yajing; Wang, Hui; Xu, Kunhan; Ni, Peixiang; Zhang, Huan; Ma, Jinmin; Yang, Huanming; Xu, Feng

    2014-01-01

    It is commonly accepted that there are many unknown viruses on the planet. For the known viruses, do we know their prevalence, even in our experimental systems? Here we report a virus survey using recently published small (s)RNA sequencing datasets. The sRNA reads were assembled and contigs were screened for virus homologues against the NCBI nucleotide (nt) database using the BLASTn program. To our surprise, approximately 30% (28 out of 94) of publications had highly scored viral sequences in their datasets. Among them, only two publications reported virus infections. Though viral vectors were used in some of the publications, virus sequences without any identifiable source appeared in more than 20 publications. By determining the distributions of viral reads and the antiviral RNA interference (RNAi) pathways using the sRNA profiles, we showed evidence that many of the viruses identified were indeed infecting and generated host RNAi responses. As virus infections affect many aspects of host molecular biology and metabolism, the presence and impact of viruses needs to be actively investigated in experimental systems. PMID:25144530

  2. Research and development for Onboard Navigation (ONAV) ground based expert/trainer system: Preliminary ascent knowledge requirements

    NASA Technical Reports Server (NTRS)

    Bochsler, Daniel C.

    1988-01-01

    The preliminary version of expert knowledge for the Onboard Navigation (ONAV) Ground Based Expert Trainer Ascent system for the space shuttle is presented. Included is some brief background information along with the information describing the knowledge the system will contain. Information is given on rules and heuristics, telemetry status, landing sites, inertial measurement units, and a high speed trajectory determinator (HSTD) state vector.

  3. Preliminary level 2 specification for the nested, fixed-depth sampling system

    SciTech Connect

    BOGER, R.M.

    1999-05-26

    This revision 1 Level 2 Specification establishes the performance, design, development, and test requirements for a sampling system and for an at-tank analysis system that will support the BNFL, Inc. privatization contract in the final disposal of Hanford's high level waste (HLW) and low activity waste (LAW). The sampling system will quickly provide large volume, representative waste samples for validating the chemical, radiological, and physical properties of the tank waste without the exposure and time concerns of the baseline grab sampling method. The on-line sensors of the at-tank analysis system will provide data from which the mixing or settling status of the waste can be assessed. This revision 1 document includes functions, requirement, and specifications for the at-tank analysis system, the results of the preliminary outline design, and the FY 1998 validation testing. The sample container filling system will comply with RCRA criteria for samples with volatile organic constituents, include empty container and swipe input ports, use Hanford's Steel Pig radioactive sample package, comply with Hanford's flammable gas criteria, and have the means to recover from broken sample containers.

  4. National roadside survey of child restraint system use in Belgium.

    PubMed

    Mathieu, Roynard; Peter, Silverans; Yvan, Casteels; Philippe, Lesire

    2014-01-01

    In September 2011 the Belgian Road Safety Institute (BRSI) conducted its first roadside survey of child restraint system (CRS) use and misuse. The aim of this study was to obtain population-bases estimates of the prevalence of use and misuse of CRS and to identify predictors of misuse on the basis of observations in real traffic conditions. The survey was conducted on randomly selected sites across the country, stratified across various types of journeys. The principal parameters analysed were: the characteristics of the children and the car drivers, type of journey, types of CRS and types of misuse. The sample consisted of 1461 children (under 135cm) for whom the conditions of restraint were observed in detail and the driver was interviewed. At least 50% of the children were not correctly restrained and 10% were not restrained at all. The most significant factors associated with CRS use were the use of a seatbelt by the driver (31% of unrestrained children for unbelted drivers, compared to 7% for belted drivers - only 32% of correctly restrained children for unbelted drivers compared to 54% for belted drivers), whether the CRS was bought in a specialized shop (only 27% of misuse compared to 45% of misuse for CRS both in supermarkets) and the age of the children. The proportion of correctly restrained children (appropriate without misuse, the bottom category in the figure) has a roughly curvilinear relation with age; decreasing from 75% at age 0 to 24% at age 8 and going back up to 63% at age 10. Although the sample of ISOFIX users was small (n=76), it appears that the ISOFIX system reduced misuse significantly. Most of the drivers were ignorant of their own errors concerning the inappropriateness and/or misuse of the CRS or they were remiss and underestimated the risk. The three main reasons given by the drivers to explain or justify the misuse noticed were: low attention level to safety (inattention, time pressure, and short distance), the child's resistance to

  5. Optical system for an astrometric survey from space

    NASA Astrophysics Data System (ADS)

    Phillips, James D.; Reasenberg, Robert D.

    1998-08-01

    We present an optical design for a spaceborne instrument, of about half m aperture, to perform a combined astrometic and photometric survey via a scan similar to that of Hipparcos. A CCD detector array with time delayed integration will permit an astrometic mission accuracy better than 50 microarcseconds for stars brighter than 10th magnitude. 1 1/2 orders better than Hipparcos. The passband is nominally 0.4 to 0.9 microns. For the instrument to have both high measurements rate and high accuracy, the optical system just satisfy several requirements. It should have aberration well under diffraction, for high precision in centroiding and as a means of keeping unmolded shifts of the image centroids small. The system should have a wide field of view so that there is a large overlap of successive scans, have a large field of view for scientific throughput, and have low image distortion so that the stellar images moved at constant rate along columns of detector pixels. The design presented meets these requirements using aspheric surfaces that are manufacturable. We have demonstrated that the instrument will determine the temperature of an observed star without requiring a dispersive element or color filters. The design is thus free of transmissive elements, and protected from the systematic errors that they might have induced, e.g., due to thermal variation variation and to chromatic effects. This study was inspired by our previous consideration of scientific throughput. Our study of data reduction from a scanning astrometic survey mission demonstrated that there is a substantial gain in mission accuracy if the spacecraft precesses without discontinuities such as those that result from gas jet firings. Our study of methods of processing the spacecraft showed that smooth rotation would be possible using solar radiation pressure, but only if the spacecraft rotation rate were increased. Maintaining the integration time for each object would require an optical design of

  6. 48 CFR 53.301-1408 - Preaward Survey of Prospective Contractor-Accounting System.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Preaward Survey of Prospective Contractor-Accounting System. 53.301-1408 Section 53.301-1408 Federal Acquisition Regulations...-1408 Preaward Survey of Prospective Contractor—Accounting System. EC01MY91.093 EC01MY91.094...

  7. Image data processing system requirements study. Volume 1: Analysis. [for Earth Resources Survey Program

    NASA Technical Reports Server (NTRS)

    Honikman, T.; Mcmahon, E.; Miller, E.; Pietrzak, L.; Yorsz, W.

    1973-01-01

    Digital image processing, image recorders, high-density digital data recorders, and data system element processing for use in an Earth Resources Survey image data processing system are studied. Loading to various ERS systems is also estimated by simulation.

  8. A Monolithic Microconcentrator Receiver For A Hybrid PV-Thermal System: Preliminary Performance

    NASA Astrophysics Data System (ADS)

    Walter, D.; Everett, V.; Vivar, M.; Harvey, J.; Van Scheppingen, R.; Surve, S.; Muric-Nesic, J.; Blakers, A.

    2010-10-01

    An innovative hybrid PV-thermal microconcentrator (MCT) system is being jointly developed by Chromasun Inc., San Jose, California, and at the Centre for Sustainable Energy Systems, Australian National University. The MCT aims to develop the small-scale, roof-top market for grid-integrated linear CPV systems. A low profile, small footprint enclosure isolates system components from the environment, relaxing the demands on supporting structures, tracking, and maintenance. Net costs to the consumer are reduced via an active cooling arrangement that provides thermal energy suitable for water and space heating, ventilation, and air conditioning (HVAC) applications. As part of a simplified, low-cost design, an integrated substrate technology provides electrical interconnection, heat sinking, and mechanical support for the concentrator cells. An existing, high-efficiency, one-sun solar cell technology has been modified for this system. This paper presents an overview of the key design features, and preliminary electrical performance of the MCT. Module efficiencies of up to 19.6% at 20x concentration have been demonstrated.

  9. Preliminary Assessment of Seals for Dust Mitigation of Mechanical Components for Lunar Surface Systems

    NASA Technical Reports Server (NTRS)

    Delgado, Irebert R.; Handschuh, Michael J.

    2010-01-01

    Component tests were conducted on spring-loaded Teflon seals to determine their performance in keeping lunar simulant out of mechanical component gearbox, motor, and bearing housings. Baseline tests were run in a dry-room without simulant for 10,000 cycles to determine wear effects of the seal against either anodized aluminum or stainless steel shafts. Repeat tests were conducted using lunar simulants JSC-1A and LHT-2M. Finally, tests were conducted with and without simulant in vacuum at ambient temperature. Preliminary results indicate minimal seal and shaft wear through 10,000 cycles, and more importantly, no simulant was observed to pass through the seal-shaft interface. Future endurance tests are planned at relevant NASA Lunar Surface System architecture shaft sizes and operating conditions.

  10. Indoor air quality impacts of residential HVAC systems. Phase 2.a report: Baseline and preliminary simulations

    SciTech Connect

    Emmerich, S.J.; Persily, A.K.

    1995-01-01

    NIST is performing whole building airflow and contaminant dispersal computer simulations with the program CONTAM93 to assess the ability of modifications of central forced-air heating and cooling systems to control pollutant sources relevant to the residential environment. The report summarizes the results of Phase II.A of this project, which consisted of three major efforts: baseline simulations of contaminant levels without indoor air quality (IAQ) controls, design of the IAQ control retrofits, and preliminary simulations of contaminant levels with the IAQ control retrofits. In Phase II.B of the study, all of the baseline cases will be modified to incorporate the IAQ control retrofits. The retrofit results will then be compared to the baseline results to evaluate the effectiveness of the retrofits.

  11. Kinematic and Moisture Environments of Convective Systems During TRMM-LBA: Preliminary Sounding Analyses

    NASA Technical Reports Server (NTRS)

    Halverson, J. B.; Rickenbach, T.; Pierce, H.; Roy, B.; Ferreira, R. N.; Fisch, G.; Einaudi, Franco (Technical Monitor)

    2000-01-01

    Preliminary radiosonde data are analyzed from a four station observation network that operated during TRMM-LBA. These data, which are undergoing quality control, are used to construct mean vertical profiles and time-height sections of u- and v- wind components, and also filtered time series analyses of layer mean relative humidity. Trends are identified in the humidity data which appear similar at all sites, and correlate well with multi-week changes in wind regime identified by Rickenbach et al. Higher-frequency modes of variation (3-5 day) also occur in the humidity and upper tropospheric winds and are spatially coherent among the four locations. The causes of these variations are explored, including interactions among upper tropospheric synoptic features. Finally, an attempt is made to relate the general morphology of convective systems to the vertical shear structure and thermodynamic changes that accompany contrasting wind regimes.

  12. Preliminary System Development and Detailed Structural Design and Analysis for the CanX-7 Nanosatellite

    NASA Astrophysics Data System (ADS)

    Singarayar, Fiona

    Satellites placed in LEO can remain there for an indefinite period of time. To reduce the density of this orbit so as to avoid potential collisions with other satellites, the IADC has published a report that suggests any satellite in LEO should de-orbit within 25 years. CanX-7 is a de-orbiting technology demonstration mission intended to help solve the global space debris problem. The work summarized in this thesis describes the author's contribution to the CanX-7 preliminary system development, as well as to the deployment detection and structural subsystems. Discussed herein are the challenges of carrying forward multiple designs in parallel and the factors and design trades that aid the decision-making process. This thesis not only presents the description of the final design of the nanosatellite, but also the evolution of the spacecraft from when it was initially envisioned in 2010 to its current state at the time of this writing.

  13. Preliminary environmental assessment for the Satellite Power System (SPS). Volume 2: Detailed assessment

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Volume 2 provides a preliminary assessment of the impact of the Satellite Power System (SPS) on the environment in a technically detailed format more suitable for peer review than the executive summary of Vol. 1. It serves to integrate and assimilate information that has appeared in documents referenced herein and to focus on issues that are purely environmental. It discloses the state-of-knowledge as perceived from recently completed DOE-sponsored studies and defines prospective research and study programs that can advance the state-of-knowledge and provide an expanded data base for use in an assessment planned for 1980. Alternatives for research that may be implemented in order to achieve this advancement are also discussed.

  14. Coastal Transport Integrated System in the Aegean Sea Islands: Framework, Methodology, Data Issues and Preliminary Results

    NASA Astrophysics Data System (ADS)

    Pantazis, D. N.; Stratakis, P.; Karathanasis, C.; Gkadolou, E.; Pagounis, V.; Chronis, K.; Gatsiou, M.; Moumouri-Frag, F.; Tsekos, P.

    2013-05-01

    Greece has more than one hundred inhabited islands, the majority of them are geographically scattered in small distances in the Aegean Sea. The Aegean Sea suffers systematically from two major issues. First, many islands are not served quite frequently with the continent or other islands' major ports. It is a situation rather problematic for the habitants of the islands who wish to travel, for the patients in need to be transferred to metropolitan hospitals, for the goods transport from and to islands. Second, there is a crucial issue in the Aegean Sea regarding the so-called "thin lines". Governments spend every year tens of million euros in subsidies in order to sustain the thin lines. Our aim is the development of an integrated and holistic spatial information system to effectively design coastal transportation lines to combat the above mentioned problems. This paper will present the project framework, the methodology followed, data issues and preliminary results.

  15. Preliminary Analysis of Mobility Systems for a Mars Micro-Rover

    NASA Astrophysics Data System (ADS)

    Patel, N.; Ellery, A.; Welch, C.; Curley, A.

    2002-01-01

    One critical area of concern with regard to the technologies required for the adequate function of a Mars robotic rover is the issue of mobility and suspension. It is generally acknowledged that for the autonomous functioning of a rover, intelligent control is required. However, it is clear that adequate mobility is essential in supplying the actuator component of such a control system. The US are committed to the springless "rocker-bogie" design which was adopted and demonstrated on the 1997 Mars Pathfinder Sojournor rover. It thus has the advantage of being flight-proven, but there are limitations to its capabilities. The rocker-bogie approach is one of many approaches which are explored here. We present a number of mobility concepts together with a preliminary analysis for comparison.

  16. Investigation of fracture-matrix interaction: Preliminary experiments in a simple system

    SciTech Connect

    Foltz, S.D.; Tidwell, V.C.; Glass, R.J.; Sobolik, S.R.

    1992-12-31

    Paramount to the modeling of unsaturated flow and transport through fractured porous media is a clear understanding of the processes controlling fracture-matrix interaction. As a first step toward such an understanding, two preliminary experiments have been performed to investigate the influence of matrix imbibition on water percolation through unsaturated fractures in the plane normal to the fracture. Test systems consisted of thin slabs of either tuff or an analog material cut by a single vertical fracture into which a constant fluid flux was introduced. Transient moisture content and solute concentration fields were imaged by means of x-ray absorption. Flow fields associated with the two different media were significantly different owing to differences in material properties relative to the imposed flux. Richards` equation was found to be a valid means of modeling the imbibition of water into the tuff matrix from a saturated fracture for the current experiment.

  17. Preliminary evaluation of the tactile feedback system based on artificial skin and electrotactile stimulation.

    PubMed

    Franceschi, M; Seminara, L; Pinna, L; Dosen, S; Farina, D; Valle, M

    2015-08-01

    This research is motivated by the need of integrating cutaneous sensing into a prosthetic device, enabling a bidirectional communication between the amputee and the prosthetic limb. An electronic skin based on piezoelectric polymer sensors transduces mechanical contact into electrical response which is conveyed to the human subject by electrotactile stimulation. Rectangular electrode arrays are placed on each patient's forearm and experiments are conducted on five different subjects to determine how well the orientation, position and direction of single lines are recognized. Overall, subjects discriminate the different touch modalities with acceptable success rates. In particular, the direction is identified at best and longitudinal lines on the patient's skin are recognized with the highest success rates. These preliminary results assess the feasibility of the artificial skin - electrostimulation system for prosthetic applications. PMID:26737307

  18. Biennial Reporting System (BRS) data: Generation and management of hazardous waste, 1997 (preliminary)

    SciTech Connect

    Not Available

    1999-05-01

    The product contains data compiled by the Biennial Reporting System (BRS) for the National Biennial RCRA Hazardous Waste Report (Based on 1997 data). The data were collected by states using the 1997 National Hazardous Waste Report Instructions and Forms (EPA Form 8700-13-A/B), or the state's equivalent information source. Data submitted by states prior to December 31, 1997 are included. Data for reports protected by RCRA Confidential Business Information (CBI) claims are not included. These data are preliminary and will be replaced by the final data. The data contain information describing the RCRA wastes generated and/or managed during 1997 by RCRA Treatment, Storage and Disposal Facilities (TSDFs) and RCRA Large Quantity Generators (LQGs). Data are reported by sites meeting the LQG and/or TSDF definitions. Sites are identified by their EPA/RCRA identification number. Response codes match those of the 1997 Hazardous Waste Report: Instructions and Forms (EPA Form 8700-13-A/B).

  19. Aerodynamic preliminary analysis system. Part 2: User's manual and program description

    NASA Technical Reports Server (NTRS)

    Divan, P.; Dunn, K.; Kojima, J.

    1978-01-01

    A comprehensive aerodynamic analysis program based on linearized potential theory is described. The solution treats thickness and attitude problems at subsonic and supersonic speeds. Three dimensional configurations with or without jet flaps having multiple nonplanar surfaces of arbitrary planform and open or closed slender bodies or noncircular contour are analyzed. Longitudinal and lateral-directional static and rotary derivative solutions are generated. The analysis is implemented on a time sharing system in conjunction with an input tablet digitizer and an interactive graphics input/output display and editing terminal to maximize its responsiveness to the preliminary analysis problem. Nominal case computation time of 45 CPU seconds on the CDC 175 for a 200 panel simulation indicates the program provides an efficient analysis for systematically performing various aerodynamic configuration tradeoff and evaluation studies.

  20. Hospital incident command system: tool for a TJC accreditation survey.

    PubMed

    Shaw, Kenneth A; Wilson, Karen D; Brown, Judy E

    2016-01-01

    The unannounced Joint Commission (TJC) accreditation survey can prove just as unpredictable and challenging as any other incident. In this article, the authors describe a plan developed by a hospital emergency response team that has proven successful in dealing with TJC and other surveys. PMID:26978959