Sample records for taiwan arc-continent collision

  1. Arc-continent collision of the Coastal Range in Taiwan: Geochronological constraints from U-Pb ages of zircons

    NASA Astrophysics Data System (ADS)

    Geng, Wei; Zhang, Xun-Hua; Huang, Long

    2018-04-01

    The oblique arc-continent collision between the Luzon arc and the southeastern margin of the Eurasian continent caused the uplift of Taiwan. The Coastal Range in eastern Taiwan is the northern section of the Luzon arc in the collision zone and thus records important information about the arc-continent collision. In this paper, we determine and analyze the U-Pb ages of magmatic zircons from the volcanic arc and clastic zircons from the fore-arc basin in the Coastal Range. For the volcanic arc in the Coastal Range, the eruption ages range from 16.8-5 Ma. Given that the initial subduction of the South China Sea oceanic crust (17 Ma) occurred before the Luzon arc formed, we conclude that the volcanic activity of the Coastal Range began at 16.8 ± 1.3 Ma; it was most active from 14 to 8 Ma and continued until approximately 5 Ma. The U-Pb chronology also indicates that the initial stage of arc-continent collision of the Coastal Range started at approximately 5 Ma, when the northern section of the Luzon arc moved away from the magmatic chamber because of the kinematics of the Philippine Sea Plate.

  2. Collision-induced rotation in an arc-continent collision: Constrained by continuous GPS observations in Mindoro, Philippines

    NASA Astrophysics Data System (ADS)

    Rau, R.; Hung, H.; Yang, C.; Tsai, M.; Ching, K.; Bacolcol, T.; Solidum, R.; Chang, W.

    2012-12-01

    The Mindoro Island, situated at the southern end of the Manila trench, is a modern arc-continent collision. Seismic activity in Mindoro concentrates mainly in the northern segment of the island as part of the Manila subduction processes; in contrast, seismicity in the middle and the southern parts of the island is rather diffuse. Although the Mindoro Island has been experiencing intense seismic activities and is a type example of arc-continent collision, the modern mode of deformation of the Mindoro collision remains unclear. We have installed eight dual-frequency continuous GPS stations in the island since May 2010. The questions we want to address by using continuous GPS observations are (1) if there are still compressions within the Mindoro collision? Have they ceased as seen by the diffuse seismicity, or are the thrust faults locked? (2) What is the mode of deformation in the Mindoro collision and what are the roles of thrust and strike-slip faults playing in the collision? (3) How does the Mindoro collision compare with the other collision, such as the Taiwan orogen? Do they share similar characteristics for the subduction-collision transition zone? For the results of the first two years GPS measurements, if we take the Sablayan site near the southern end of the Manila trench as the reference station, a large counterclockwise rotation from south to north, with horizontal velocities of 1.9-31.1 mm/yr from 165 to 277 degrees, are found in the island. The deformation of the Mindoro is similar to the pattern of the transition zone from collision to subduction in northeastern Taiwan. This result suggests that collision-induced rotation is occurring in the Mindoro Island and the Mindoro arc-continent collision is still active.

  3. Integrated structural model for active arc-continental collision from southern Taiwan to central Taiwan inferred from seismogenic views

    NASA Astrophysics Data System (ADS)

    Nagai, S.; Wang, Y.; Ma, K.; Wu, Y.; Huang, H.

    2010-12-01

    The Taiwan Island is located in ongoing arc-continent collision zone between the Philippine Sea Plate and the Eurasian Plate. Numerous geophysical and geological studies have explained the tectonic processes and developed various models. There are two end-member models for Taiwan collision; Thin-skinned model [e.g. Suppe, 1987] and Lithospheric collision model [Wu et al., 1997]. One of most important issue is that collision in Taiwan involves and contributes deformation to what depth. We have presented on this point in central Taiwan through seismological views, including both observed facts and results of tomographic inversion [Nagai et al., 2010 in WPGM 2010]. We have concluded that orogenic process should involve and contribute to depth of 30 km at least in central Taiwan, and suggested ’Upper Crustal Stacking Model’. We have indicated that existence of low-velocity blocks under Central Mountain Range (CMR) is one of the most important factors to understand Taiwan arc-continental collision process. We extend this idea to southern and northern Taiwan and to connect with balanced cross-sections proposed in Ustaszewski et al. [2010]. In this talk, we focused on the structural variation from southern Taiwan to central Taiwan. We have been performing the local double-difference tomography [Zhang and Thurber, 2003] in southern and northern Taiwan using the Central Weather Bureau Seismic Network with temporary array observations. These results in seismic tomography show variation of seismic velocity under the CMR like in central Taiwan. Low-velocity anomalies are also detected. Although it should be checked carefully, velocity blocks segmented some parts and seismic activities seem to be located on their boundaries. The Jiaxian earthquake on 4th Mar, 2010 occurred on one of these segmentation boundaries. The tectonic process in Taiwan arc-continental collision consists of different-scale structures, which means finer resolution structures may be nested with the

  4. New Caledonia a classic example of an arc continent collision

    NASA Astrophysics Data System (ADS)

    Aitchison, J.

    2011-12-01

    The SW Pacific island of New Caledonia presents a classic example of an arc-continent collision. This event occurred in the Late Eocene when elements of an intra-oceanic island arc system, the Loyalty-D'Entrecasteaux arc, which stretched SSE from near Papua New Guinea east of New Caledonia to offshore New Zealand, collided with micro-continental fragments that had rifted off eastern Gondwana (Australia) in the late Cretaceous. Intervening Late Cretaceous to Paleogene oceanic crust of the South Loyalty Basin was eliminated through eastward subduction beneath this west-facing intra-oceanic island arc. As with many arc-continent collisions elsewhere collision was accompanied by ophiolite emplacement. The erosional remnants of which are extensive in New Caledonia. Collision led to subduction flip, followed by extensive rollback in front of the newly established east-facing Vitiaz arc. Post-collisional magmatism occurred after slab break-off and is represented by small-scale granitoid intrusions. Additional important features of New Caledonia include the presence of a regionally extensive UHP metamorphic terrain consisting of blueschists and eclogites that formed during the subduction process and were rapidly exhumed as a result of the collision Not only was collision and associated orogeny short-lived this collision system has not been overprinted by any major subsequent collision. New Caledonia thus provides an exceptional location for the study of processes related to arc-continent collision in general.

  5. Nurture Versus Nature: Accounting for the Differences Between the Taiwan and Timor active arc-continent collisions

    NASA Astrophysics Data System (ADS)

    Harris, R. A.

    2011-12-01

    The active Banda arc/continent collision of the Timor region provides many important contrasts to what is observed in Taiwan, which is mostly a function of differences in the nature of the subducting plate. One of the most important differences is the thermal state of the respective continental margins: 30 Ma China passive margin versus 160 Ma NW Australian continental margin. The subduction of the cold and strong NW Australian passive margin beneath the Banda trench provides many new constraints for resolving longstanding issues about the formative stages of collision and accretion of continental crust. Some of these issues include evidence for slab rollback and subduction erosion, deep continental subduction, emplacement or demise of forearc basement, relative amounts of uplift from crustal vs. lithospheric processes, influence of inherited structure, partitioning of strain away from the thrust front, extent of mélange development, metamorphic conditions and exhumation mechanisms, continental contamination and accretion of volcanic arcs, does the slab tear, and does subduction polarity reverse? Most of these issues link to the profound control of lower plate crustal heterogeneity, thermal state and inherited structure. The thermomechanical characteristics of subducting an old continental margin allow for extensive underthrusting of lower plate cover units beneath the forearc and emplacement and uplift of extensive nappes of forearc basement. It also promotes subduction of continental crust to deep enough levels to experience high pressure metamorphism (not found in Taiwan) and extensive contamination of the volcanic arc. Seismic tomography confirms subduction of continental lithosphere beneath the Banda Arc to at least 400 km with no evidence for slab tear. Slab rollback during this process results in massive subduction erosion and extension of the upper plate. Other differences in the nature of the subducting plates in Taiwan in Timor are differences in the

  6. Basins in ARC-continental collisions

    USGS Publications Warehouse

    Draut, Amy E.; Clift, Peter D.; Busby, Cathy; Azor, Antonio

    2012-01-01

    Arc-continent collisions occur commonly in the plate-tectonic cycle and result in rapidly formed and rapidly collapsing orogens, often spanning just 5-15 My. Growth of continental masses through arc-continent collision is widely thought to be a major process governing the structural and geochemical evolution of the continental crust over geologic time. Collisions of intra-oceanic arcs with passive continental margins (a situation in which the arc, on the upper plate, faces the continent) involve a substantially different geometry than collisions of intra-oceanic arcs with active continental margins (a situation requiring more than one convergence zone and in which the arc, on the lower plate, backs into the continent), with variable preservation potential for basins in each case. Substantial differences also occur between trench and forearc evolution in tectonically erosive versus tectonically accreting margins, both before and after collision. We examine the evolution of trenches, trench-slope basins, forearc basins, intra-arc basins, and backarc basins during arc-continent collision. The preservation potential of trench-slope basins is low; in collision they are rapidly uplifted and eroded, and at erosive margins they are progressively destroyed by subduction erosion. Post-collisional preservation of trench sediment and trench-slope basins is biased toward margins that were tectonically accreting for a substantial length of time before collision. Forearc basins in erosive margins are usually floored by strong lithosphere and may survive collision with a passive margin, sometimes continuing sedimentation throughout collision and orogeny. The low flexural rigidity of intra-arc basins makes them deep and, if preserved, potentially long records of arc and collisional tectonism. Backarc basins, in contrast, are typically subducted and their sediment either lost or preserved only as fragments in melange sequences. A substantial proportion of the sediment derived from

  7. Crust-mantle boundaries in the Taiwan - Luzon arc-continent collision system determined from local earthquake tomography and layered Vp models

    NASA Astrophysics Data System (ADS)

    Ustaszewski, K. M.; Wu, Y.; Suppe, J.; Huang, H.; Carena, S.; Chang, C.

    2011-12-01

    We performed 3D mapping of crust-mantle boundaries in the Taiwan-Luzon arc-continent collision zone using a local earthquake tomographic model, providing better insight into the mode of subduction polarity reversal. The mapped crust-mantle discontinuities include three tectonically distinct Mohos. Furthermore, a crust-mantle boundary marks the eastern limit of the Eurasian lower crust against the mantle of the Philippine Sea plate. It dips steeply to the east underneath eastern and southern Taiwan and steepens progressively towards north until it becomes vertical at 23.7°N. From there it continues northward in a slightly overturned orientation, where the limit of the tomographic model at the northern tip of the island prevents further mapping. In order to map several Moho discontinuities, we contoured a surface of constant Vp = 7.5 km s-1 constrained from local earthquake tomography and confined to regions with a minimum of 500 rays per tomography cell. Additional constraints for the Moho were derived from layered (1D) Vp models using P-wave arrivals of local earthquakes recorded at 52 seismic stations, employing a genetic algorithm. The Moho of the Eurasian and the Philippine Sea plates are topologically disconnected across the plate boundary. Beneath southern Taiwan, the Eurasian Moho dips to the E at 50-60°, following the orientation of the plate boundary and continuous with the Benioff zone. Towards north, the Eurasian Moho twists to become subvertical, again together with the plate boundary. At the same time, it steps westward into a more external position underneath the thrust belt, giving way to the north-dipping Philippine Sea plate. The Philippine Sea plate Moho shallows towards the surface along the Longitudinal Valley suture. It forms a synform-like crustal root with an axis parallel to the trend of geological units at surface and it is interpreted as the base of the magmatic Luzon arc. Towards the north, the crustal root deepens from 30 km to about 70

  8. Monitoring interseismic activity on the Ilan Plain (NE Taiwan) using Small Baseline PS-InSAR, GPS and leveling measurements: partitioning from arc-continent collision and backarc extension

    NASA Astrophysics Data System (ADS)

    Su, Zhe; Hu, Jyr-Ching; Wang, Erchie; Li, Yongsheng; Yang, Yinghui; Wang, Pei-Ling

    2018-01-01

    The Ilan Plain, located in Northeast Taiwan, represents a transition zone between oblique collision (between the Luzon Arc and the Eurasian Plate) and backarc extension (the Okinawa Trough). The mechanism for this abrupt transition from arc-continent collision to backarc extension remains uncertain. We used Global Positioning System (GPS), leveling and multi-interferogram Small Baseline Persistent Scatterer Interferometry (SBAS-PSI) data to monitor the interseismic activity in the basin. A common reference site was selected for the data sets. The horizontal component of GPS and the vertical measurements of the leveling data were converted to line-of-sight (LOS) data and compared with the SBAS-PSI data. The comparison shows that the entire Ilan Plain is undergoing rapid subsidence at a maximum rate of -11 ± 2 mm yr-1 in the LOS direction. We speculate that vertical deformation and anthropogenic activity may play important roles in this deformation. We also performed a joint inversion modeling that combined both the DInSAR and strong motion data to constrain the source model of the 2005 Ilan earthquake. The best-fitting model predicts that the Sansing fault caused the 2005 Ilan earthquake. The observed transtensional deformation is dominated by the normal faulting with a minor left-lateral strike-slip motion. We compared our SBAS-PSI results with the short-term (2005-2009) groundwater level changes. The results indicate that although pumping-induced surface subsidence cannot be excluded, tectonic deformation, including rapid southward movement of the Ryukyu arc and backarc extension of the Okinawa Trough, characterizes the opening of the Ilan Plain. Furthermore, a series of normal and left-lateral strike-slip transtensional faults, including the Choshui and Sansing faults, form a bookshelf-like structure that accommodates the extension of the plain. Although situated in a region of complex structural interactions, the Ilan Plain is primarily controlled by extension

  9. Continent-arc collision in the Banda Arc imaged by ambient noise tomography

    NASA Astrophysics Data System (ADS)

    Porritt, Robert W.; Miller, Meghan S.; O'Driscoll, Leland J.; Harris, Cooper W.; Roosmawati, Nova; Teofilo da Costa, Luis

    2016-09-01

    The tectonic configuration of the Banda region in southeast Asia captures the spatial transition from subduction of Indian Ocean lithosphere to subduction and collision of the Australian continental lithosphere beneath the Banda Arc. An ongoing broadband seismic deployment funded by NSF is aimed at better understanding the mantle and lithospheric structure in the region and the relationship of the arc-continent collision to orogenesis. Here, we present results from ambient noise tomography in the region utilizing this temporary deployment of 30 broadband instruments and 39 permanent stations in Indonesia, Timor Leste, and Australia. We measure dispersion curves for over 21,000 inter-station paths resulting in good recovery of the velocity structure of the crust and upper mantle beneath the Savu Sea, Timor Leste, and the Nusa Tenggara Timur (NTT) region of Indonesia. The resulting three dimensional model indicates up to ∼25% variation in shear velocity throughout the plate boundary region; first-order velocity anomalies are associated with the subducting oceanic lithosphere, subducted Australian continental lithosphere, obducted oceanic sediments forming the core of the island of Timor, and high velocity anomalies in the Savu Sea and Sumba. The structure in Sumba and the Savu Sea is consistent with an uplifting forearc sliver. Beneath the island of Timor, we confirm earlier inferences of pervasive crustal duplexing from surface mapping, and establish a link to underlying structural features in the lowermost crust and uppermost mantle that drive upper crustal shortening. Finally, our images of the volcanic arc under Flores, Wetar, and Alor show high velocity structures of the Banda Terrane, but also a clear low velocity anomaly at the transition between subduction of oceanic and continental lithosphere. Given that the footprint of the Banda Terrane has previously been poorly defined, this model provides important constraints on tectonic reconstructions that

  10. Two-dimensional seismic velocity models of southern Taiwan from TAIGER transects

    NASA Astrophysics Data System (ADS)

    McIntosh, K. D.; Kuochen, H.; Van Avendonk, H. J.; Lavier, L. L.; Wu, F. T.; Okaya, D. A.

    2013-12-01

    We use a broad combination of wide-angle seismic data sets to develop high-resolution crustal-scale, two-dimensional, velocity models across southern Taiwan and the adjacent Huatung Basin. The data were recorded primarily during the TAIGER project and include records of thousands of marine airgun shots, several land explosive sources, and ~90 Earthquakes. Both airgun sources and earthquake data were recorded by dense land arrays, and ocean bottom seismographs (OBS) recorded airgun sources east of Taiwan. This combination of data sets enables us to develop a high-resolution upper- to mid-crustal model defined by marine and explosive sources, while also constraining the full crustal structure - with depths approaching 50 km - by using the earthquake and explosive sources. These data and the resulting models are particularly important for understanding the development of arc-continent collision in Taiwan. McIntosh et al. (2013) have shown that highly extended continental crust of the northeastern South China Sea rifted margin is underthrust at the Manila trench southwest of Taiwan but then is structurally underplated to the accretionary prism. This process of basement accretion is confirmed in the southern Central Range of Taiwan where basement outcrops can be directly linked to high seismic velocities measured in the accretionary prism well south of the continental shelf, even south of Taiwan. These observations indicate that the southern Central Range begins to grow well before there is any direct interaction between the North Luzon arc and the Eurasian continent. Our transects provide information on how the accreted mass behaves as it approaches the continental shelf and on deformation of the arc and forearc as this occurs. We suggest that arc-continent collision in Taiwan actually develops as arc-prism-continent collision.

  11. Detrital U-Pb zircon dating of lower Ordovician syn-arc-continent collision conglomerates in the Irish Caledonides

    USGS Publications Warehouse

    Clift, P.D.; Carter, A.; Draut, A.E.; Long, H.V.; Chew, D.M.; Schouten, H.A.

    2009-01-01

    The Early Ordovician Grampian Orogeny in the British Isles represents a classic example of collision between an oceanic island arc and a passive continental margin, starting around 480??Ma. The South Mayo Trough in western Ireland preserves a complete and well-dated sedimentary record of arc collision. We sampled sandstones and conglomerates from the Rosroe, Maumtrasna and Derryveeny Formations in order to assess erosion rates and patterns during and after arc collision. U-Pb dating of zircons reveals a provenance dominated by erosion from the upper levels of the Dalradian Supergroup (Southern Highland and Argyll Groups), with up to 20% influx from the colliding arc into the Rosroe Formation, but only 6% in the Maumtrasna Formation (~ 465??Ma). The dominant source regions lay to the northeast (e.g. in the vicinity of the Ox Mountains, 50??km distant, along strike). The older portions of the North Mayo Dalradian and its depositional basement (the Annagh Gneiss Complex) do not appear to have been important sources, while the Connemara Dalradian only plays a part after 460??Ma, when it supplies the Derryveeny Formation. By this time all erosion from the arc had effectively ceased and exhumation rates had slowed greatly. The Irish Grampian Orogeny parallels the modern Taiwan collision in showing little role for the colliding arc in the production of sediment. Negligible volumes of arc crust are lost because of erosion during accretion to the continental margin. ?? 2008 Elsevier B.V.

  12. Northern Papua New Guinea: Structure and sedimentation in a modern arc-continent collision

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Abbott, L.; Silver, E.

    Northern Papua New Guinea and the Solomon Sea are the site of a modern oblique, arc-continent collision, which is progressing from northwest to southeast. By combining offshore seismic data from the Solomon Sea with geologic mapping in the Markham Valley area of northern Papua New Guinea the authors are predicting the outcome of this collision. The Huon Gulf is the present site of initial collision. Seismic profiles show this area is dominated by thin thrust sheets. Onshore, the bulk of the uplifted accretionary wedge is a melange with exotic blocks of a variety of lithologies. Structurally below the melange liesmore » the Leron Formation composed of thick channelized sandstone and conglomerate. It dips north at approximately 40{degree} and is cut by several thrust fault with associated folds. Limestone blocks within the melange are reported to be 2 Ma, and Beryllium 10 anomalies from Bismarck arc volcanoes suggest that initial collision of the Finisterre block (375 km northwest of the present collision point) began no earlier than 3 Ma. This implies the collision is propagating laterally at about 125 km/m.y.. Large outcrops of basalt and gabbro within the melange suggest that segments of oceanic crust were incorporated into the accretionary wedge. Modern sedimentation within the collision zone grades from fluvial sediments in the Markham Valley to deep-water turbidites ponded behind a structural ridge near the point of incipient collision. The Markham submarine canyon occupies the collision front here, and efficiently erodes the accretionary wedge. This setting may serve as a modem analog for deposition of much of the Leron Formation which exhibits tremendous sediment reworking.« less

  13. Three-thrust fault system at the plate suture of arc-continent collision in the southernmost Longitudinal Valley, eastern Taiwan

    NASA Astrophysics Data System (ADS)

    Lee, J.; Chen, H.; Hsu, Y.; Yu, S.

    2013-12-01

    Active faults developed into a rather complex three-thrust fault system at the southern end of the narrow Longitudinal Valley in eastern Taiwan, a present-day on-land plate suture between the Philippine Sea plate and Eurasia. Based on more than ten years long geodetic data (including GPS and levelling), field geological investigation, seismological data, and regional tomography, this paper aims at elucidating the architecture of this three-thrust system and the associated surface deformation, as well as providing insights on fault kinematics, slip behaviors and implications of regional tectonics. Combining the results of interseismic (secular) horizontal and vertical velocities, we are able to map the surface traces of the three active faults in the Taitung area. The west-verging Longitudinal Valley Fault (LVF), along which the Coastal Range of the northern Luzon arc is thrusting over the Central Range of the Chinese continental margin, braches into two active strands bounding both sides of an uplifted, folded Quaternary fluvial deposits (Peinanshan massif) within the valley: the Lichi fault to the east and the Luyeh fault to the west. Both faults are creeping, to some extent, in the shallow surface level. However, while the Luyeh fault shows nearly pure thrust type, the Lichi fault reveals transpression regime in the north and transtension in the south end of the LVF in the Taitung plain. The results suggest that the deformation in the southern end of the Longitudinal Valley corresponds to a transition zone from present arc-collision to pre-collision zone in the offshore SE Taiwan. Concerning the Central Range, the third major fault in the area, the secular velocities indicate that the fault is mostly locked during the interseismic period and the accumulated strain would be able to produce a moderate earthquake, such as the example of the 2006 M6.1 Peinan earthquake, expressed by an oblique thrust (verging toward east) with significant left-lateral strike slip

  14. Plate boundary reorganization in the active Banda Arc-continent collision: Insights from new GPS measurements

    NASA Astrophysics Data System (ADS)

    Nugroho, Hendro; Harris, Ron; Lestariya, Amin W.; Maruf, Bilal

    2009-12-01

    New GPS measurements reveal that large sections of the SE Asian Plate are progressively accreting to the edge of the Australian continent by distribution of strain away from the deformation front to forearc and backarc plate boundary segments. The study was designed to investigate relative motions across suspected plate boundary segments in the transition from subduction to collision. The oblique nature of the collision provides a way to quantify the spatial and temporal distribution of strain from the deformation front to the back arc. The 12 sites we measured from Bali to Timor included some from an earlier study and 7 additional stations, which extended the epoch of observation to ten years at many sites. The resulting GPS velocity field delineates at least three Sunda Arc-forearc regions around 500 km in strike-length that shows different amounts of coupling to the Australian Plate. Movement of these regions relative to SE Asia increases from 21% to 41% to 63% eastward toward the most advanced stages of collision. The regions are bounded by the deformation front to the south, the Flores-Wetar backarc thrust system to the north, and poorly defined structures on the sides. The suture zone between the NW Australian continental margin and the Sunda-Banda Arcs is still evolving with more than 20 mm/yr of movement measured across the Timor Trough deformation front between Timor and Australia.

  15. The volcanoes of an oceanic arc from origin to destruction: A case from the northern Luzon Arc

    NASA Astrophysics Data System (ADS)

    Lai, Yu-Ming; Song, Sheng-Rong

    2013-09-01

    Volcanoes were created, grew, uplifted, became dormant or extinct, and were accreted as part of continents during continuous arc-continent collision. Volcanic rocks in Eastern Taiwan's Coastal Range (CR) are part of the northern Luzon Arc, an oceanic island arc produced by the subduction of the South China Sea Plate beneath the Philippine Sea Plate. Igneous rocks are characterized by intrusive bodies, lava and pyroclastic flows, and volcaniclastic rocks with minor tephra deposits. Based on volcanic facies associations, Sr-Nd isotopic geochemistry, and the geography of the region, four volcanoes were identified in the CR: Yuemei, Chimei, Chengkuangao, and Tuluanshan. Near-vent facies associations show different degrees of erosion in the volcanic edifices for Chimei, Chengkuangao, and Tuluanshan. Yuemei lacks near-vent rocks, implying that Yuemei's main volcanic body may have been subducted at the Ryukyu Trench with the northward motion of the Philippine Sea Plate. These data suggest a hypothesis for the evolution of volcanism and geomorphology during arc growth and ensuing arc-continent collision in the northern Luzon Arc, which suggests that these volcanoes were formed from the seafloor, emerging as islands during arc volcanism. They then became dormant or extinct during collision, and finally, were uplifted and accreted by additional collision. The oldest volcano, Yuemei, may have already been subducted into the Ryukyu Trench.

  16. 2D/3D Numerical Models of the Taiwan Orogen: Oblique Arc-Continent Collision overlying Orthogonal Subduction Systems

    NASA Astrophysics Data System (ADS)

    Kanda, R. V.; Suppe, J.; Wu, J. E.

    2013-12-01

    Recent plate-tectonic reconstructions based on mapping of subducted slabs imaged by state-of-the-art tomographic models, and constrained by paleomagnetic data demonstrate that the Philippine Sea Plate (PSP) was originally part of the Sunda Plate (SP). These reconstructions show that the PSP has moved northward with Australia across 25° of latitude since the early Eocene (~ 43 Ma). Most of this motion of the PSP was accommodated on the north and east by overriding a southward subducting East Asian Sea (EAS) ocean basin that was contiguous with the present-day Eurasian Plate (EP). On the western margin of the PSP, this northward advance was accommodated by a N-S transform system. Ages of the Luzon volcanic arc suggest that by early Miocene (~ 15-20 Ma), the EP seafloor west of this transform started subducting eastwards, and highly obliquely, underneath a NNW moving PSP that was detached from the SP. Further, by late Miocene (~10 Ma), northward subduction of the PSP along the present Ryukyu Trench began as a result of arc-continent collision of the PSP along the Eurasian continental margin and flipping of subduction polarity due to slab break-off of the south-subducting EAS. A significant rotation of the PSP-EP convergence to the present more northwesterly direction occurred only over the last ~2 Ma. This present-day juxtaposition of orthogonal subduction polarities beneath Taiwan can be understood in terms of a margin-parallel lithospheric STEP fault, that accomplishes the progressive SW extension of the Ryukyu Trench (RT), and also marks the northern limit of the EP subduction. The torn edge of the Eurasian lithosphere is imaged tomographically. Further support for this tearing comes from our newly developed multi-resolution stress maps based on focal-mechanism inversions and the seismicity distribution. Our inferred stress orientations indicate orthogonal contact between the subducting PSP and the Eurasian lithospheres, resulting in present-day E-W strike

  17. Arc-continent collision and the formation of continental crust: A new geochemical and isotopic record from the Ordovician Tyrone Igneous Complex, Ireland

    USGS Publications Warehouse

    Draut, Amy E.; Clift, Peter D.; Amato, Jeffrey M.; Blusztajn, Jerzy; Schouten, Hans

    2009-01-01

    Collisions between oceanic island-arc terranes and passive continental margins are thought to have been important in the formation of continental crust throughout much of Earth's history. Magmatic evolution during this stage of the plate-tectonic cycle is evident in several areas of the Ordovician Grampian-Taconic orogen, as we demonstrate in the first detailed geochemical study of the Tyrone Igneous Complex, Ireland. New U-Pb zircon dating yields ages of 493 2 Ma from a primitive mafic intrusion, indicating intra-oceanic subduction in Tremadoc time, and 475 10 Ma from a light rare earth element (LREE)-enriched tonalite intrusion that incorporated Laurentian continental material by early Arenig time (Early Ordovician, Stage 2) during arc-continent collision. Notably, LREE enrichment in volcanism and silicic intrusions of the Tyrone Igneous Complex exceeds that of average Dalradian (Laurentian) continental material that would have been thrust under the colliding forearc and potentially recycled into arc magmatism. This implies that crystal fractionation, in addition to magmatic mixing and assimilation, was important to the formation of new crust in the Grampian-Taconic orogeny. Because similar super-enrichment of orogenic melts occurred elsewhere in the Caledonides in the British Isles and Newfoundland, the addition of new, highly enriched melt to this accreted arc terrane was apparently widespread spatially and temporally. Such super-enrichment of magmatism, especially if accompanied by loss of corresponding lower crustal residues, supports the theory that arc-continent collision plays an important role in altering bulk crustal composition toward typical values for ancient continental crust. ?? 2009 Geological Society of London.

  18. Imaging high-pressure rock exhumation along the arc-continent suture in eastern Taiwan

    NASA Astrophysics Data System (ADS)

    Brown, Dennis; Feng, Kuan-Fu; Wu, Yih-Min; Huang, Hsin-Hua

    2015-04-01

    Imaging high-pressure rock exhumation in active tectonic settings is considered to be one of the important observations that could potentially help to move forward the understanding of how this process works. Petrophysical analyses carried out along a high velocity zone imaged by seismic travel time tomography along the suture zone between the actively colliding Luzon Arc and the southeastern margin of Eurasia in Taiwan suggests that high-pressure rocks are being exhumed from at least a depth of 50 km below the arc-continent suture to the shallow subsurface where they coincide with an outcropping tectonic mélange called the Yuli Belt. The Yuli Belt comprises mainly greenschist facies quartz-mica schist, with lesser metabasite, metamorphosed mantle fragments and, importantly, minor blueschist. Modeling of published data bases of measured seismic velocities for a large suite of rocks suggests that all of the Yuli belt lithologies fit well with the measured Vp, Vs, and Vp/Vs at ambient pressures and temperatures (a 20 oC/km geotherm is used) from 10 to about 20 km depth. With the exception of hornblendite, mantle rocks need 30% to 40 % serpentinization to approximate the in situ range of Vp and and Vs at these depths. From about 20 km to 30 km, most continental crust and volcanic arc lithologies move out of the range of velocities measured by the tomography model at these depths. Blueschist (including the calculated Vp and Vs for the Yuli Belt samples), pyroxenite, and harzburgite, lherzolite, and dunite with around 20% to 30% serpentinization now enter into the range of velocities for these depths. From 40 km to 50 km depth, the mantle rocks pyroxenite, and weakly to unserpentinized harzburgite, lherzolite, and dunite, together with mafic eclogite velocities best fit the range of Vp, Vs and Vp/Vs at these depths. Seismicity along the arc-continent suture, the upper bounding fault of the high velocity zone examined here, indicate that it is a moderately oblique

  19. Imaging the subsurface of Taiwan using ambient noise tomography and full waveform inversion

    NASA Astrophysics Data System (ADS)

    Rodzianko, Anastasia

    Arc-continent collision is a process that over millions of years built most of the existing continents. Continental crust is thought to remain on the surface during these plate interactions, and its mass loss is accounted for by shortening. Remnants and clues about the mechanics of this process are available on the surface of Earth, but to understand the mechanics one must probe the subsurface of modern day arc-continent collisions. Taiwan is such an example: it is the result of a complex, actively deforming tectonic boundary between the Eurasian and Philippine Sea plates. This seismically active location provides an excellent venue for seismically imaging processes related to arc-continent collision, which is what the TAIGER (TAiwan Integrated GEodynamics Research) project was created to accomplish. In this thesis, data collected by the TAIGER deployment, supplemented by observations from the permanent BATS (Broadband Array in Taiwan for Seismology) network, is used to create a 3D elastic wave velocity model of the crust and upper mantle beneath Taiwan. This model addresses an outstanding question about arc-continent interactions using the tectonic structure of Taiwan: do arc-continent collisions involve the consumption of continental crust? Ambient noise tomography techniques create a 3D Vs model by using continuous ambient noise, which is whitened and cross-correlated between stations to construct empirical Green's functions of Rayleigh waves. The correlations are graded by the signal to noise ratio prior to recovering group and phase velocities of the fundamental mode for periods between 6 and 30 seconds. The results are combined to generate a 3D Vs model from which a Vp model is calculated using a constant Vp/Vs ratio of 1.7. This model, combined with the arrival time model of Kuo-Chen et al. (2012), is used as a starting model for full waveform inversion of teleseismic body and surface waves using the 2.5D technique of Roecker et al. (2010). The results of

  20. Seismic Strain Field in Taiwan

    NASA Astrophysics Data System (ADS)

    Kao, H.; Liang, W.; Chang, T.; Liu, Y.; Lee, E.

    2001-12-01

    Centroid-moment-tensor (CMT) solutions determined by inverting waveform data of Broadband Array in Taiwan for Seismology (BATS) are collected for earthquakes that occurred in the Taiwan region. In total, the dataset contains more than 300 events that scattered across an area of 400 km by 400 km, including the devastating 1999 Chi-Chi earthquake sequence. The entire region is divided into 3 layers (0-40 km, 40-70 km, and greater than 70 km) with blocks of 0.2 degree by 0.2 degree in lateral dimension. Seismic moment tensors of all earthquakes that occurred inside each block are summed to give the strain tensor characterizing the corresponding seismic deformation. We calculate the eigenvalues and eigenvectors of the resulted strain tensor for each block and project the normalized maximum compressional (P) and extensional (T) axes on horizontal plane to resolve the strain field in Taiwan associated with regional seismic activities. For the majority of events with depths less than 40 km (i.e., at crustal scale), the strain field is characterized by nearly E-W compression along the eastern coastline and immediately offshore east of Taiwan. Once inland, clear fan-shaped trajectories of P-axes are observed, ranging from NW-SE in the northwest to NE-SW in the southwest. The Ryukyu and Luzon subduction systems show compression in the forearc region and extension in the backarc and outerrise regions. For depths greater than 40 km, a clear pattern of lateral compression is observed within the subducted Philippine Sea plate to the northeast of Taiwan. It is doubtless that the "slab-continent" collision is predominant at deeper depths near the junction between the Ryukyu arc and Taiwan Collision Zone, whereas the "arc-continent" collision is predominant in the central and southern Taiwan.

  1. Geochemical Interpretation of Collision Volcanism

    NASA Astrophysics Data System (ADS)

    Pearce, Julian

    2014-05-01

    Collision volcanism can be defined as volcanism that takes place during an orogeny from the moment that continental subduction starts to the end of orogenic collapse. Its importance in the Geological Record is greatly underestimated as collision volcanics are easily misinterpreted as being of volcanic arc, extensional or mantle plume origin. There are many types of collision volcanic province: continent-island arc collision (e.g. Banda arc); continent-active margin collision (e.g. Tibet, Turkey-Iran); continent-rear-arc collision (e.g. Bolivia); continent-continent collision (e.g. Tuscany); and island arc-island arc collision (e.g. Taiwan). Superimposed on this variability is the fact that every orogeny is different in detail. Nonetheless, there is a general theme of cyclicity on different time scales. This starts with syn-collision volcanism resulting from the subduction of an ocean-continent transition and continental lithosphere, and continues through post-collision volcanism. The latter can be subdivided into orogenic volcanism, which is related to thickened crust, and post-orogenic, which is related to orogenic collapse. Typically, but not always, collision volcanism is preceded by normal arc volcanism and followed by normal intraplate volcanism. Identification and interpretation of collision volcanism in the Geologic Record is greatly facilitated if a dated stratigraphic sequence is present so that the petrogenic evolution can be traced. In any case, the basis of fingerprinting collision terranes is to use geochemical proxies for mantle and subduction fluxes, slab temperatures, and depths and degrees of melting. For example, syn-collision volcanism is characterized by a high subduction flux relative to mantle flux because of the high input flux of fusible sediment and crust coupled with limited mantle flow, and because of high slab temperatures resulting from the decrease in subduction rate. The resulting geochemical patterns are similar regardless of

  2. Plate Tectonics and Taiwan Orogeny based on TAIGER Experiments

    NASA Astrophysics Data System (ADS)

    Wu, F. T.; Kuochen, H.; McIntosh, K. D.

    2014-12-01

    Plate tectonics framework is usually complex in a collision zone, where continental lithosphere is involved. In the young Taiwan orogeny, with geologic understanding and large new geodetic and subsurface datasets now available an environment has been created for testing tectonic hypotheses regarding collision and orogeny. Against the background of the commonly accepted view of Taiwan as a southward propagating, self-similar 2-D orogen, a fully 3-D structure is envisaged. Along the whole length of the island the convergence of the Eurasian plate (EUP) the Philippine Sea plate (PSP) takes shape with different plate configurations. In northern Taiwan the convergence occurs with simultaneous collision of the oceanic PSP with continental EUP and the northward subduction of the PSP; in the south, EUP, in the guise of the South China Sea rifted Eurasian continent, subducts toward the east; in central Taiwan collision of oceanic PSP with continental EUP dominates. When relocated seismicity and focal mechanisms are superposed on subsurface P and Vp/Vs velocity images the configurations and the kinematics of the PSP and EUP collision and subduction become clear. While in northern Taiwan the subduction/collision explains well the high peaks and their dwindling (accompanied by crustal thinning) toward the north. In the south, mountains rise above the east-dipping EUP subduction zone as the Eurasian continental shelf veers toward the southwest, divergent from the trend of the Luzon Arc - calling into question the frequently cited arc-continent collision model of Taiwan orogeny. High velocity anomaly and Benioff seismicity coexist in the south. Going north toward Central Taiwan the high velocity anomaly persists for another 150 km or so, but it becomes seismically quiescent. Above the quiescent section the PSP and EUP collide to build the main part of the Central Range and its parallel neighbor the eastern Coastal Range. Key implications regarding orogeny include: 1) Significant

  3. Linking Anomalously Low Topographic Relief in the Taiwan Arc-Continent Collision to a Submarine Plateau South of the Collision.

    NASA Astrophysics Data System (ADS)

    Byrne, T. B.; Lin, A. T.; Su, C. C.; Lewis, J. C.; Liu, C. S.; Ouimet, W. B.; Chen, T. T.; Huang, C.

    2015-12-01

    Ouimet et al. (2014; submitted) have recently described broad areas of anomalously low relief and slope that straddle the topographic ridge crest in Taiwan. The areas are anomalous because Taiwan also preserves some of the steepest topography in the world, as expected from the high rates of convergence, exhumation and erosion. In addition, several age-elevation data sets (see Hsu et al. this meeting), using new and previously published ZrnFT, ZrnHe and ApFT ages, show exhumation cooling rates of 3 to 5 mm/yr since ~1.5-2.0 Ma, which is consistent with the exposure of reset zircons beneath the surfaces. Erosion rates of this magnitude, however, are expected to produce significant topographic relief, making it difficult to generate a topographic surface of low slope and low relief centered on the ridge crest. Very young ApFT and ZrnHe ages (e.g., < 0.5 Ma) also suggest a more recent acceleration in exhumation cooling. A relatively large area of low relief centered on the top of the submarine accretionary prism south of Taiwan may provide a solution for this conundrum. The area covers ca 1000 km2, has a mean elevation of ca 450 m below sea level and appears to be composed of hard, intact rocks rather than unlithified deep sea muds. Several attempts at gravity and piston coring failed to penetrate the substrate and samples retrieved in the core catcher include rounded clasts of quartz and siltstone. Geophysical studies also show high Vp velocities at relatively shallow depths beneath the sea floor, suggesting the removal of a significant volume of sediment and rock, presumably through erosion. We propose that this low relief plateau serves as a modern analog for the formation of the low relief surfaces that currently straddle the ridge crest in Taiwan. If this interpretation is correct, it suggests a tectonic model in which submarine erosion processes modulate vertical growth of the prism until collision of thick continental crust promotes uplift that outpaces erosion

  4. Transition of the Taiwan-Ryukyu collision-subduction process as revealed by ocean-bottom seismometer observations

    NASA Astrophysics Data System (ADS)

    Chin, Shao-Jinn; Lin, Jing-Yi; Chen, Yen-Fu; Wu, Wen-Nan; Liang, Chin-Wei

    2016-10-01

    Located at the arc-continental collision region between the Eurasian (EP) and Philippine Sea Plates (PSP), Taiwan is usually considered to have a complex tectonic environment, particularly along the eastern coast of the island. To gain a better understanding of the geological evolution of the east Taiwan area, the data from 8 Ocean Bottom Seismometers (OBS) acquired during the Across Taiwan Strait Explosion Experiment in 2012 and 14 inland seismic stations were used to determine a more detailed and accurate distribution of marine earthquakes. Based on the 333 relocated earthquakes and available geophysical data, we suggest two main tectonic boundaries for eastern Taiwan. South of 23.25°N, the homogeneous distribution of earthquakes in the crustal portion for both the inland and offshore areas suggests an ongoing collisional process. North of this location, between approximately 23.25°N and 23.8°N, the abrupt increasing of seismicity depth infers that the underthrusted arc/fore-arc material is deforming due to the collisional compression at depth. In this segment, the subsidence of the arc/fore-arc area determines the transition from collision to subduction. North of 23.8°N, the northwestern dipping PSP is well illustrated by the seismicity both onshore and offshore, indicating a dominant subduction process.

  5. Active arc-continent collision: Earthquakes, gravity anomalies, and fault kinematics in the Huon-Finisterre collision zone, Papua New Guinea

    NASA Astrophysics Data System (ADS)

    Abers, Geoffrey A.; McCaffrey, Robert

    1994-04-01

    The Huon-Finisterre island arc terrane is actively colliding with the north edge of the Australian continent. The collision provides a rare opportunity to study continental accretion while it occurs. We examine the geometry and kinematics of the collision by comparing earthquake source parameters to surface fault geometries and plate motions, and we constrain the forces active in the collision by comparing topographic loads to gravity anomalies. Waveform inversion is used to constrain focal mechanisms for 21 shallow earthquakes that occurred between 1966 and 1992 (seismic moment 1017 to 3 × 1020 N m). Twelve earthquakes show thrust faulting at 22-37 km depth. The largest thrust events are on the north side of the Huon Peninsula and are consistent with slip on the Ramu-Markham thrust fault zone, the northeast dipping thrust fault system that bounds the Huon-Finisterre terrane. Thus much of the terrane's crust but little of its mantle is presently being added to the Australian continent. The large thrust earthquakes also reveal a plausible mechanism for the uplift of Pleistocene coral terraces on the north side of the Huon Peninsula. Bouguer gravity anomalies are too negative to allow simple regional compensation of topography and require large additional downward forces to depress the lower plate beneath the Huon Peninsula. With such forces, plate configurations are found that are consistent with observed gravity and basin geometry. Other earthquakes give evidence of deformation above and below the Ramu-Markham thrust system. Four thrust events, 22-27 km depth directly below the Ramu-Markham fault outcrop, are too deep to be part of a planar Ramu-Markham thrust system and may connect to the north dipping Highlands thrust system farther south. Two large strike-slip faulting earthquakes and their aftershocks, in 1970 and 1987, show faulting within the upper plate of the thrust system. The inferred fault planes show slip vectors parallel to those on nearby thrust

  6. Accommodation by Varying Strain Regimes along the Northern Luzon Arc (Coastal Range, Taiwan) - Insights from Focal Mechanism Strain Inversions

    NASA Astrophysics Data System (ADS)

    O'Hara, D.; Lee, J.; Lewis, J. C.; Rau, R.

    2013-12-01

    Taiwan is the product of modern subduction polarity reversal coupled with arc-continent collision. The NW-moving Philippine Sea plate (PSP) subducts beneath the Eurasian plate (EUR) to the northeast of Taiwan at the Ryukyu trench, while overriding EUR south of Taiwan at the Manila trench, bringing the Luzon volcanic arc into collision with the deforming sediments of the Eurasian passive margin. The obliquity between the N-S trending Luzon Arc (LA) and NE-SW trending passive margin is causing the southward, temporal propagation of collision since ~6 Ma. The collided forearc and clastic sediments accreted by the advancing arc created the Coastal Range (CR), whose western-most extent lies at the suture zone between the two plates, the NNE-SSW trending Longitudinal Valley Fault (LVF). In order to understand the change in stress along the northern LA as it docks onto EUR, we inverted over 1900 relocated earthquake focal mechanism solutions within the on-land CR and offshore LA regions for spatial strain tensors. The focal mechanisms cover seismicity from 1991-2013, ranging in depths 0-112 km and magnitudes 2.22-6.92. For our analyses, we grouped the focal mechanisms based on 15' Latitudinal intervals along the study area and inverted the data for best-fit strain tensors using a micropolar continuum model of crustal deformation. Results suggest dominant compression in all regions with accommodation occurring through oblique reverse faults of varying dips. Trends of σ1 rotate clockwise (CW) from 100° in the south to 155° in the north. This CW rotation is also observed in the preferred nodal plane slip vector trends - from E-W orientation in the south to NW-SE in the north. The rotation of σ1 and slip vector trends creates varying degrees of obliquity with the direction normal (DN) to CR (112°). The trends in the southern part of the study area show obliquity counterclockwise (CCW) to DN; trends in the central part are near parallel to DN; and trends in the northern

  7. Large-scale deformation related to the collision of the Aleutian Arc with Kamchatka

    USGS Publications Warehouse

    Gesit, Eric L.; Scholl, David W.

    1994-01-01

    The far western Aleutian Island Arc is actively colliding with Kamchatka. Westward motion of the Aleutian Arc is brought about by the tangential relative motion of the Pacific plate transferred to major, right-lateral shear zones north and south of the arc. Early geologic mapping of Cape Kamchatka (a promontory of Kamchatka along strike with the Aleutian Arc) revealed many similarities to the geology of the Aleutian Islands. Later studies support the notion that Cape Kamchatka is the farthest west Aleutian “island” and that it has been accreted to Kamchatka by the process of arc-continent collision. Deformation associated with the collision onshore Kamchatka includes gravimetrically determined crustal thickening and formation of a narrow thrust belt of intensely deformed rocks directly west of Cape Kamchatka. The trend of the thrust faults is concave toward the collision zone, indicating a radial distribution of maximum horizontal compressive stress. Offshore, major crustal faults trend either oblique to the Kamchatka margin or parallel to major Aleutian shear zones. These offshore faults are complex, accommodating both strike-slip and thrust displacements as documented by focal mechanisms and seismic reflection data. Earthquake activity is much higher in the offshore region within a zone bounded to the north by the northernmost Aleutian shear zone and to the west by an apparent aseismic front. Analysis of focal mechanisms in the region indicate that the present-day arc-continent “contact zone” is located directly east of Cape Kamchatka. In modeling the dynamics of the collision zone using thin viscous sheet theory, the rheological parameters are only partially constrained to values of n (the effective power law exponent) ≥ 3 and Ar(the Argand number) ≤ 30. These values are consistent with a forearc thermal profile of Kamchatka, previously determined from heat flow modeling. The thin viscous sheet modeling also indicates that onshore thrust faulting

  8. Seismogenic patterns in the Taiwan region: insights from source parameter inversion of BATS data

    NASA Astrophysics Data System (ADS)

    Kao, Honn; Jian, Pei-Ru

    2001-04-01

    the overall orogenic process of Taiwan. The lithospheric collision in Taiwan should consist of two major components: one is the well-recognized ;arc-continent collision; that dominates the central and southern Taiwan and another the ;slab-continent collision; that reigns in northern Taiwan. A cluster of earthquakes near Hualien suggests that an incipient west- or northwestward subduction of the Philippine Sea plate is currently taking place there. Alternatively, they can be interpreted to suggest that the steeply east-dipping Longitudinal Valley fault may have transformed, near Hualien, into a diffuse thrust zone, which eventually connects itself to the plate interplate beneath the southernmost Ryukyu arc. Earthquakes beneath Taiwan and the Taiwan Strait are compatible with the overall collision convergence and lateral extrusion. Nonetheless, the lateral extrusion is probably only a secondary feature in the tectonic processes of Taiwan.

  9. Mountain building processes during continent continent collision in the Uralides

    NASA Astrophysics Data System (ADS)

    Brown, D.; Juhlin, C.; Ayala, C.; Tryggvason, A.; Bea, F.; Alvarez-Marron, J.; Carbonell, R.; Seward, D.; Glasmacher, U.; Puchkov, V.; Perez-Estaun, A.

    2008-08-01

    Since the early 1990's the Paleozoic Uralide Orogen of Russia has been the target of a significant research initiative as part of EUROPROBE and GEODE, both European Science Foundation programmes. One of the main objectives of these research programmes was the determination of the tectonic processes that went into the formation of the orogen. In this review paper we focus on the Late Paleozoic continent-continent collision that took place between Laurussia and Kazakhstania. Research in the Uralides was concentrated around two deep seismic profiles crossing the orogen. These were accompanied by geological, geophysical, geochronological, geochemical, and low-temperature thermochronological studies. The seismic profiles demonstrate that the Uralides has an overall bivergent structural architecture, but with significantly different reflectivity characteristics from one tectonic zone to another. The integration of other types of data sets with the seismic data allows us to interpret what tectonic processes where responsible for the formation of the structural architecture, and when they were active. On the basis of these data, we suggest that the changes in the crustal-scale structural architecture indicate that there was significant partitioning of tectonothermal conditions and deformation from zone to zone across major fault systems, and between the lower and upper crust. Also, a number of the structural features revealed in the bivergent architecture of the orogen formed either in the Neoproterozoic or in the Paleozoic, prior to continent-continent collision. From the end of continent-continent collision to the present, low-temperature thermochronology suggests that the evolution of the Uralides has been dominated by erosion and slow exhumation. Despite some evidence for more recent topographic uplift, it has so far proven difficult to quantify it.

  10. Constructing a Teleseismic Tomographic Image of Taiwan using BATS Recordings

    NASA Astrophysics Data System (ADS)

    Krajewski, J.; Roecker, S.

    2005-12-01

    Taiwan is an evolving arc-continent collision located at a complicated part of the plate boundary between the Eurasian and Philippine Sea plates. To better understand the role of the upper mantle in the dynamics of this collision, we reviewed 4 years of data from the Broadband Array in Taiwan for Seismology (BATS) in Taiwan to construct a teleseismic dataset for tomographic imaging of the subsurface of the island. From an initial selection of approximately 300 events, we used waveform correlation to generate a dataset of 4500 relative arrival times. To calculate accurate travel times in three dimensional wavespeed models over the large lateral distances in our model (~800 km), we solve the eikonal equation directly in a spherical coordinate system. We reduce the influence of smearing of crustal heterogeneity into the deeper mantle, we fix the upper 30 km to a previously determined P wavespeed model for the region. Initial resolution tests suggest a spatial limit on the order of 40 km.

  11. Dimensionality Analysis and Geo-Electric Structure of Long-period Magnetotelluric Data, Southern Taiwan, TAIGER project

    NASA Astrophysics Data System (ADS)

    Chiang, C.; Chen, C.; Bertrand, E. A.; Unsworth, M. J.; Turkoglu, E.; Hsu, H.; Hill, G.

    2007-12-01

    The Taiwan orogen has formed as a result of the arc-continent collision between the Eurasian continental margin and the Luzon island arc over the last 3 million years. It is the type example of an arc-continent collision. In 2004, the Taiwan Integrated Geodynamical Research (TAIGER) project was formed and began a systematic investigation of the crustal and upper mantle structure beneath Taiwan. This included new magnetotelluric (MT) data collection to study the geo-electrical structure beneath Taiwan. High quality long period MT data has been collected through collaboration between National Central University, Taiwan, and the University of Alberta, Canada. In total, 82 long-period MT stations were deployed on 4 cross- island profiles in Taiwan with a remote reference station located on Penghu Island in the Taiwan Strait. The remote reference is ~50km from the main island of Taiwan and is used to reduce cultural noise effects in these data from the populated mainland. Dimensionality analysis from tensor decomposition has been performed on these data using the McNeice-Jones algorithm. The results of this analysis indicate that the electrical structures are two-dimensional with dominant strike directions N45° E, N37° E and N29 ° E in northern, central and southern Taiwan, respectively. As expected, these strike directions are essentially parallel to the regional geology. The decomposition parameters of shear, twist and anisotropy for these profiles are small, indicating the 2-D strike directions are well constrained. The dimensionality analysis presented implies that the generation of 2- D inversion models will be appropriate for these data. The results of 2-D inversion show that the collision boundary between the Eurasian and Philippine Sea Plates is beneath the central range in the southern profile. A low resistivity zone is located beneath the western foothills. At mid-crustal depth, a boundary is imaged between conductive western sedimentary rocks and the

  12. A study on crustal shear wave splitting in the western part of the Banda arc-continent collision

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Syuhada, E-mail: hadda9@gmail.com; Research Centre for Physics - Indonesian Institute of Sciences; Hananto, Nugroho D.

    2016-03-11

    We analyzed shear wave splitting parameters from local shallow (< 30 km) earthquakes recorded at six seismic stations in the western part of the Banda arc-continent collision. We determined fast polarization and delay time for 195 event-stations pairs calculated from good signal-to-noise ratio waveforms. We observed that there is evidence for shear wave splitting at all stations with dominant fast polarization directions oriented about NE-SW, which are parallel to the collision direction of the Australian plate. However, minor fast polarization directions are oriented around NW-SE being perpendicular to the strike of Timor through. Furthermore, the changes in fast azimuths with themore » earthquake-station back azimuth suggest that the crustal anisotropy in the study area is not uniform. Splitting delay times are within the range of 0.05 s to 0.8 s, with a mean value of 0.29±0.18 s. Major seismic stations exhibit a weak tendency increasing of delay times with increasing hypocentral distance suggesting the main anisotropy contribution of the shallow crust. In addition, these variations in fast azimuths and delay times indicate that the crustal anisotropy in this region might not only be caused by extensive dilatancy anisotropy (EDA), but also by heterogeneity shallow structure such as the presence of foliations in the rock fabric and the fracture zones associated with active faults.« less

  13. Differential preservation in the geologic record of intraoceanic arc sedimentary and tectonic processes

    USGS Publications Warehouse

    Draut, Amy; Clift, Peter D.

    2013-01-01

    Records of ancient intraoceanic arc activity, now preserved in continental suture zones, are commonly used to reconstruct paleogeography and plate motion, and to understand how continental crust is formed, recycled, and maintained through time. However, interpreting tectonic and sedimentary records from ancient terranes after arc–continent collision is complicated by preferential preservation of evidence for some arc processes and loss of evidence for others. In this synthesis we examine what is lost, and what is preserved, in the translation from modern processes to the ancient record of intraoceanic arcs. Composition of accreted arc terranes differs as a function of arc–continent collision geometry. ‘Forward-facing’ collision can accrete an oceanic arc on to either a passive or an active continental margin, with the arc facing the continent and colliding trench- and forearc-side first. In a ‘backward-facing’ collision, involving two subduction zones with similar polarity, the arc collides backarc-first with an active continental margin. The preservation of evidence for contemporary sedimentary and tectonic arc processes in the geologic record depends greatly on how well the various parts of the arc survive collision and orogeny in each case. Preservation of arc terranes likely is biased towards those that were in a state of tectonic accretion for tens of millions of years before collision, rather than tectonic erosion. The prevalence of tectonic erosion in modern intraoceanic arcs implies that valuable records of arc processes are commonly destroyed even before the arc collides with a continent. Arc systems are most likely to undergo tectonic accretion shortly before forward-facing collision with a continent, and thus most forearc and accretionary-prism material in ancient arc terranes likely is temporally biased toward the final stages of arc activity, when sediment flux to the trench was greatest and tectonic accretion prevailed. Collision geometry

  14. Seismotectonics of New Guinea: a Model for Arc Reversal Following Arc-Continent Collision

    NASA Astrophysics Data System (ADS)

    Cooper, Patricia; Taylor, Brian

    1987-02-01

    The structure and evolution of the northern New Guinea collision zone is deduced from International Seismological Center (ISC) seismicity (1964-1985), new and previously published focal mechanisms and a reexamination of pertinent geological data. A tectonic model for the New Guinea margin is derived which illustrates the sequential stages in the collision and suturing of the Bewani-Toricelli-Adelbert-Finisterre-Huon-New Britain arc to central New Guinea followed by subduction polarity reversal in the west. East of 149°E, the Solomon plate is being subducted both to the north and south; bringing the New Britain and Trobriand forearcs toward collision. West of 149°E the forearcs have collided, and together they override a fold in the doubly subducted Solomon plate lithosphere, which has an axis that is parallel to the strike of the Ramu-Markham suture and that plunges westward at an angle of 5° beneath the coast ranges of northern New Guinea. Active volcanism off the north coast of New Guinea is related to subduction of the Solomon plate beneath the Bismarck plate. Active volcanism of the Papuan peninsula and Quaternary volcanism of the New Guinea highlands are related to slow subduction of the Solomon plate beneath the Indo-Australian plate along the Trobriand Trough and the trough's former extension to the west, respectively. From 144°-148°E, seismicity and focal mechanisms reveal that convergence between the sutured Bismarck and Indo-Australian plates is accommodated by thrusting within the Finisterre and Adelbert ranges and compression of the New Guinea orogenic belt, together with basement-involved foreland folding and thrusting to the south. The Finisterre block overthrusts the New Guinea orogenic belt, whereas the Adelbert block is sutured to New Guinea and overthrusts the oceanic lithosphere of the Bismarck Sea. Along the New Guinea Trench, west of 144°E, seismicity defines a southward dipping Wadati-Benioif zone, and focal mechanisms indicate oblique

  15. New Orogenic Model for Taiwan Collision Zone Inferred From Three-dimensional P- and S-wave Velocity Structures and Seismicity

    NASA Astrophysics Data System (ADS)

    Nagai, S.; Hirata, N.; Sato, H.

    2008-12-01

    The island of Taiwan is located in the site of ongoing arc-continent collision zone between the Philippine Sea Plate (PSP) and the Eurasian Plate (EUP). Numerous geophysical and geological studies are done in and around Taiwan to develop various models to explain the tectonic processes in the Taiwan region. However, their details have not been known enough, especially under the Central Range. We suggest a new orogenic model for Taiwan orogeny, named 'Upper Crustal Stacking Model', inferred from our tomographic images using three temporary seismic networks with the Central Weather Bureau Seismic Network. These three temporary networks are the aftershock observation after the 1999 Chi-Chi Taiwan earthquake and two dense array observations across central and southern Taiwan, respectively. Tomographic images by the double-difference tomography [Zhang and Thurber, 2003] show a lateral alternate variation of high- and low-velocity, which are well correlated to surface geology and separated by east-dipping boundaries. These images have reliable high-resolution by dense arrays to be able to discuss this alternate variation. We found three high-velocity zones (> 6.0km/s). The westernmost zone corresponds to the subducting EUP. Other two zones are located beneath the Hsuehshan Range and the Eastern Central Range with trends of eastward dipping, respectively. And, we could image low-velocity zone located beneath Backbone Range between the two high-velocity zones clearly. We interpret that these east-dipping high- and low-velocity zones can be divided into two layered blocks and the subducting EUP, each of which consists of a high-velocity body under low-velocity one. Layered blocks can be interpreted as stacked thrust sheets between the subducting EUP and the Northern Luzon Arc, a part of PSP. These thrust sheets are parts of upper- and mid-crust detached from the subducting EUP. The model of continental subduction followed by buoyancy-driven exhumation can explain the

  16. Paleomagnetic study of an active arc-continent collision, Finisterre Arc Terrane, Papua New Guinea

    NASA Astrophysics Data System (ADS)

    Weiler, Peter Donald

    1999-12-01

    This dissertation includes 3 studies from the active collision zone between the Finisterre volcanic arc and Papua New Guinea. Chapter 1 is a paleomagnetic study of thrust sheets of the fold and thrust belt north of the Ramu-Markham suture indicating very rapid vertical-axis rotations related to tectonic transport of thrust units. Our data indicate that rotations as great as 90° since 1 Ma have occurred locally in the Erap Valley area. Such rapid rotations during thrust sheet emplacement may be more common in fold and thrust belts than is presently recognized. Anisotropy of magnetic susceptibility (AMS) lineations are rendered parallel by the same rotations used to restore the paleomagnetic remanence to N-S thus independently confirming the rapid rotations. In Chapter 2, we compare the AMS fabrics from the Erap Valley with microscopic shape fabrics obtained through digital image analysis. We find that the orientations of principal axes found by the two techniques agree very well, but that the maximum and intermediate axes of the magnetic fabric are inverted relative to the grain shape. We interpret the shape fabric as a primary depositional fabric, and the magnetic fabric as the result of a weak tectonic strain overprinting a depositional fabric. Thus, comparison of these fabrics detects the earliest transition from depositional to tectonic strain fabric. Finally, in Chapter 3, we turn to larger scale paleomagnetic results from the colliding Finisterre Arc. Hemipelagic rocks possess a syn-collisional remagnetization indicating a clockwise rotation of the colliding terrane through about 40° in post-Miocene time. Decreasing paleomagnetic declination anomalies as a function of along-strike distance in the Finisterre Terrane, analyzed by our preferred model of a linear remagnetization and a migrating Euler pole, suggests an average rotation rate of 8°/Ma. Thus, we propose that the rotation results from a rigid-body rotation of the Finisterre Terrane rather than from

  17. Precisely relocated seismicity using 3-D seismic velocity model by double-difference tomography method and orogenic processes in central and southern Taiwan

    NASA Astrophysics Data System (ADS)

    Nagai, S.; Wu, Y.; Suppe, J.; Hirata, N.

    2009-12-01

    The island of Taiwan is located in the site of ongoing arc-continent collision zone between the Philippine Sea Plate and the Eurasian Plate. Numerous geophysical and geological studies are done in and around Taiwan to develop various models to explain the tectonic processes in the Taiwan region. The active and young tectonics and the associated high seismicity in Taiwan provide us with unique opportunity to explore and understand the processes in the region related to the arc-continent collision. Nagai et al. [2009] imaged eastward dipping alternate high- and low-velocity bodies at depths of 5 to 25 km from the western side of the Central Mountain Range to the eastern part of Taiwan, by double-difference tomography [Zhang and Thurber, 2003] using three temporary seismic networks with the Central Weather Bureau Seismic Network(CWBSN). These three temporary networks are the aftershock observation after the 1999 Chi-Chi Taiwan earthquake and two dense linear array observations; one is across central Taiwan in 2001, another is across southern Taiwan in 2005, respectively. We proposed a new orogenic model, ’Upper Crustal Stacking Model’ inferred from our tomographic images. To understand the detailed seismic structure more, we carry on relocating earthquakes more precisely in central and southern Taiwan, using three-dimensional velocity model [Nagai et al., 2009] and P- and S-wave arrival times both from the CWBSN and three temporary networks. We use the double-difference tomography method to improve relative and absolute location accuracy simultaneously. The relocated seismicity is concentrated and limited along the parts of boundaries between low- and high-velocity bodies. Especially, earthquakes occurred beneath the Eastern Central Range, triggered by 1999 Chi-Chi earthquake, delineate subsurface structural boundaries, compared with profiles of estimated seismic velocity. The relocated catalog and 3-D seismic velocity model give us some constraints to reconstruct

  18. A Comprehensive View Of Taiwan Orogeny From TAIGER Perspective

    NASA Astrophysics Data System (ADS)

    Wu, F. T.; Kuochen, H.; McIntosh, K. D.; Okaya, D. A.; Lavier, L. L.

    2012-12-01

    Arc-continent collision is one of the basic mechanisms for building continental masses. Taiwan is young and very active. Based on known geology a multi-disciplinary geophysical experiment was designed to image the orogeny in action. Logistics for R/V Langseth, OBS and PASSCAL instruments was complex; nevertheless the field works were completed within the project period. The resulting dataset allows us to map the structures of the shallow crust and the upper mantle. The amount of data gathered is large; some key observations and current interpretations are: (I) Observation: Crustal roots on both Eurasian and Philippine Sea plates, with a high velocity rise in between. Interpretation: Deformation throughout lithosphere on both sides of the initial suture; shortening of lithosphere near plate boundary produce high velocity rise. (II) Observation: Upper mantle high velocity anomaly coincides with a steep east-dippping Wadati-Benioff seismicity in southern Taiwan; the anomaly continues part of the way to central Taiwan but it is aseismic; under northern Taiwan the anomaly is very weak and disorganized. Interpretation: Active subduction in the south (up to 22.8°N) and may be eclogitization in the lower crust and delamination in central Taiwan. (III) Observation: Low Vp/Vs, low resistivity in the core of Central Range. Interp: dry, felsic rocks at relatively high temper (up to 750OC). (IV) Obs: Strong SKS splitting (~2 sec) with trend-parallel fast axis. Interp: Shearing throughout uppermost mantle. Preliminary 2-D geodynamic modeling produces the primary observed features from simple initial model of an arc impinging on continental margin.

  19. Seismic Migration Imaging of the Crust and Upper Mantle Discontinuity Structure beneath Southern Taiwan

    NASA Astrophysics Data System (ADS)

    Liu, Y.-S.; Kuo, B.-Y.

    2009-04-01

    Taiwan is located in the convergent plate boundary zone where the Philippine Sea plate has obliquely collided on the Asian continental margin, initiating the arc-continent collision and subsequent mountain-building in Taiwan. Receiver function has been a powerful tool to image seismic velocity discontinuity structure in the crust and upper mantle which can help illuminate the deep dynamic process of active Taiwan orogeny. In this study, we adopt backprojection migration processing of teleseismic receiver functions to investigate the crust and upper mantle discontinuities beneath southern Taiwan, using the data from Southern Taiwan Transect Seismic Array (STTA), broadband stations of Central Weather Bureau (CWB), Broadband Array in Taiwan for Seismology (BATS), and Taiwan Integrated Geodynamics Research (TAIGER). This composite east-west trending linear array has the aperture of about 150 km with the station spacing of ~5-10 km. Superior to the common midpoint (CMP) stack approach, the migration can properly image the dipping, curved, or laterally-varying topography of discontinuous interfaces which very likely exist under the complicated tectonic setting of Taiwan. We first conduct synthetic experiments to test the depth and lateral resolution of migration images based on the WKBJ synthetic waveforms calculated from available source and receiver distributions. We will next construct the 2-D migration image under the array to reveal the topographic variation of the Moho and lithosphere discontinuities beneath southern Taiwan.

  20. Oblique Northeastward Lateral Extrusion of a Crustal Block in North-central Taiwan: a Mechanism for Syn-tectonic Extension

    NASA Astrophysics Data System (ADS)

    Gourley, J. R.; Byrne, T.

    2005-12-01

    An integrated data set of earthquake locations (Taiwan's Central Weather Bureau), focal mechanisms from the Broadband Array of Taiwan Seismicity (BATS), GPS velocities and geologic data are combined to constrain the geometry and kinematics of a crustal block within the metamorphic basement of Taiwan's northeastern Central Range. The active block is bounded by two parallel seismic zones that accommodate uplift and northeastward oblique lateral extrusion. The western shear zone is a region that dips vertically to steeply west and projects generally to the western boundary between the Slate Belt and pre-Tertiary metamorphic basement. BATS focal mechanisms consistently show east-side-up, left-lateral normal displacements. Late-stage geologic structures published previously show left-lateral faulting followed by east-west extension. The eastern shear zone dips vertically to steeply west and projects to the eastern boundary of the metamorphic basement, which correlates with the eastern mountain front in this area. BATS focal mechanisms show west-side-up reverse displacements. The kinematics of these two zones define a crustal scale block that is interpreted to be moving up and northeast towards the Okinawa Trough. The extrusion of this crustal block may be driven in part by the topographic difference between the Central Range and the Okinawa Trough, as well as by the active collision between the Philippine Sea Plate and the Eurasian basement high. This proposed northeastern lateral extrusion mirrors the active lateral extrusion in southwestern Taiwan which is observed on the southern side of the Eurasian basement high collision. The involvement of the basement high in the collision and adjacent regions appears to be an important factor in understanding local structural variations in the arc-continent collision and should be considered in both forward and reverse modeling of Taiwan deformation.

  1. Basal accretion, a major mechanism for mountain building in Taiwan revealed in rock thermal history

    NASA Astrophysics Data System (ADS)

    Chen, Chih-Tung; Chan, Yu-Chang; Lo, Ching-Hua; Malavieille, Jacques; Lu, Chia-Yu; Tang, Jui-Ting; Lee, Yuan-Hsi

    2018-02-01

    Deep tectonic processes are key integral components in the evolution of mountain belts, while observations of their temporal development are generally obscured by thermal resetting, retrograde alteration and structural overprinting. Here we recorded an integrated rock time-temperature history for the first time in the pro-wedge part of the active Taiwan arc-continent collision starting from sedimentation through cleavage-forming state to its final exhumation. The integrated thermal and age results from the Raman Spectroscopy of Carbonaceous Material (RSCM) method, zircon U-Pb laser ablation dating, and in-situ40Ar/39Ar laser microprobe dating suggest that the basal accretion process was crucial to the development of the Taiwanese orogenic wedge. The basal accretion process commenced early in the mountain building history (∼6 Ma) and gradually migrated to greater depths, as constrained by persistent plate convergence and cleavage formation under nearly isothermal state at similar depths until ∼ 2.5 Ma recorded in the early-accreted units. Such development essentially contributed to mountain root growth by the increased depth of the wedge detachment and the downward wedge thickening during the incipient to full collision stages in the Taiwan mountain belt.

  2. SKS Splitting and the Scale of Vertical Coherence of the Taiwan Mountain Belt

    NASA Astrophysics Data System (ADS)

    Kuo, Ban-Yuan; Lin, Shu-Chuan; Lin, Yi-Wei

    2018-02-01

    Many continental orogens feature a pattern of SKS shear wave splitting with fast polarization directions parallel to the mountain fabrics and delay times of 1-2 s, implying that the crust and lithosphere deform consistently. In the Taiwan arc-continent collision zone, similar pattern of SKS splitting exists, and thereby lithospheric scale deformation due to collision has been assumed. However, recent dynamic modeling demonstrated that the SKS splitting in Taiwan can be generated by the toroidal flow in the asthenosphere induced by the subduction of the Philippine Sea plate and the Eurasian plate. To further evaluate this hypothesis, we analyzed a new data set using a quantitative approach. The results show that models with slab geometries constrained by seismicity explain the observed fast splitting direction to within 25°, whereas the misfit grows to 50-60° if the toroidal flow is disrupted by the presence of a sizable aseismic slab beneath central Taiwan as often suggested by tomographic imaging. However, small sized aseismic slab or detached slab fragment can potentially reconcile the splitting observations. We estimated the scale of vertical coherence to be 10-40 km in the lithosphere and 100-150 km in the asthenosphere, making the former unfavorable for accumulating large delay times. The low coherence is caused by the subduction of the Eurasian plate that creates complex deformation different from what characterizes the compressional tectonics above the plate. This suggests that the mountain building in Taiwan is a shallow process, rather than lithospheric in scale.

  3. A Comparison of Food Supply from 1984 to 2009 and Degree of Dietary Westernization in Taiwan with Asian Countries and World Continents.

    PubMed

    Peng, Cheau-Jane; Lin, Cheng-Yao; Guo, How-Ran

    2015-01-01

    To compare quality, quantity, and trends of food supply from 1984 to 2009 and degree of food westernization in Taiwan with Asian countries and world continents by using food balance data. We compiled data from food balance sheets of Taiwan and Food and Agriculture Organization, including five continents and three most populated countries each in Eastern, Southern, and Southeastern Asia over the period 1984-2009. Quantity of food supply per capita was referenced to Taiwan food guides. The population-weighted means of food supply from Europe, North America, South America, and Australia and New Zealand continents in terms of energy and nutrient distributions, animal/plant sources, and sugar/alcohol contribution were used as indicators of westernization. Trends of food supply per capita of six food groups were plotted, and linear regression was applied to evaluate food changes. Taiwan's food supply provided sufficient quantity in food energy, with the lowest cereals/roots supply and rice to wheat ratio, but the highest meat and oil supplies per capita among the 10 studied Asian countries. Taiwan food supply showed the most westernization among these countries. Food supply of Taiwan, although currently sufficient, indicated some security problems and high tendency of diet westernization.

  4. Transformation of juvenile Izu-Bonin-Mariana oceanic arc into mature continental crust: An example from the Neogene Izu collision zone granitoid plutons, Central Japan

    NASA Astrophysics Data System (ADS)

    Saito, Satoshi; Tani, Kenichiro

    2017-04-01

    Kaikomagatake granitoid pluton formed by anatexis of 'hybrid lower crust' consisting of K-rich rear-arc crust of the IBM arc and metasedimentary rocks of the Honshu arc. These studies collectively suggest that the chemical diversity within the Izu Collision Zone granitoid plutons reflects the chemical variation of basaltic sources (i.e., across-arc chemical variation in the IBM arc) as well as variable contribution of the metasedimentary component in the source region. The petrogenetic models of the Izu Collision Zone granitoid plutons suggest that collision with another mature arc/continent, hybrid lower crust formation and subsequent hybrid source anatexis are required for juvenile oceanic arcs to produce granitoid magmas with enriched compositions. The Izu Collision Zone granitoid plutons provide an exceptional example of the collision-induced transformation from a juvenile oceanic arc to the mature continental crust.

  5. Shallow seismicity of arc-continent collision near Lae, Papua New Guinea

    NASA Astrophysics Data System (ADS)

    Kulig, Christopher; McCaffrey, Robert; Abers, Geoffrey A.; Letz, Horst

    1993-11-01

    In northeastern New Guinea, the narrow Ramu-Markham Valley (RMV) separates island arc rocks to the north from those of continental origin to the south and appears to be the western, onland extension of the New Britain trench. To explore the tectonic processes at the leading edge of the island arc during collision, we operated a portable seismic network for six weeks near the city of Lae at the eastern end of the RMV. We observed a narrow, near-vertical belt of seismicity between 10 and 30 km depth, that we call the Lae Seismic Zone (LSZ), starting at the RMV in the southwest and trending northeasterly cutting across surface geologic structure. The truncation of the LSZ along a steep plane by the Ramu-Markham Fault Zone (RMFZ) and earthquake first motions suggest that the earthquakes occur in the hanging wall of a steep, N-dipping fault that crops out at the RMFZ. We also consider that the LSZ is within the lower plate of a gently dipping thrust. Below 20 km depth the microearthquake zone is truncated by a gently, NE-dipping plane coinciding in depth and dip with nodal planes of recent large ( mb = 5.6 and 6.0) thrust earthquakes. We suggest that the Huon Peninsula is being emplaced onto the Australian plate along a gently (~ 25°) dipping thrust fault that is 20 km deep beneath Lae. The RMFZ may be a steeply dipping thrust fault that connects with this gently, N-dipping thrust but accommodates little convergence at present. The LSZ trends nearly perpendicular to an anticlinal range which appears to be sheared in a left-lateral sense. P-wave first motions for earthquakes in the LSZ with steep (70° to 90° dip) nodal planes that strike parallel to the LSZ suggest a component of south-side-up displacement also. Hence, the crustal block south of the LSZ may be rising relative to the Huon Peninsula and the rapid Quaternary uplift rates estimated for the Lae coastal region may be higher than the uplift rate of the Huon Peninsula as a whole. We suggest that the LSZ

  6. Three depositional states and sedimentary processes of the western Taiwan foreland basin system

    NASA Astrophysics Data System (ADS)

    Lin, Yi-Jung; Wu, Pei-Jen; Yu, Ho-Shing

    2010-05-01

    The western Taiwan foreland basin formed during the Early Pliocene as the flexural response to the loading of Taiwan orogen on the Eurasian plate. What makes Taiwan interesting is the oblique collision, which allows the foreland basin to be seen at different stages in its evolution at the present day. Due to oblique arc-continent collision from north to south, the western Taiwan foreland basin has evolved into three distinct subbasins: an over-filled basin proximal to the Taiwan orogen, mainly distributed in the Western Foothills and Coastal Plain provinces, a filled basin occupying the shallow Taiwan Strait continental shelf west of the Taiwan orogen and an under-filled basin distal to the Taiwan orogen in the deep marine Kaoping Slope offshore southwest Taiwan, respectively. The over-filled depositional phase is dominated by fluvial environments across the structurally controlled piggy-back basins. The filled depositional state in the Taiwan Strait is characterized by shallow marine environments and is filled by Pliocene-Quaternary sediments up to 4,000 m thick derived from the Taiwan orogen with an asymmetrical and wedge-shaped cross section. The under-filled depositional state is characteristic of deep marine environments in the wedge-top basins accompanied by active structures of thrust faults and mud diapers. Sediments derived from the Taiwan orogen have progressively filled the western Taiwan foreland basin across and along the orogen. Sediment dispersal model suggests that orogenic sediments derived from oblique dischronous collisional highlands are transported in two different ways. Transport of fluvial and shallow marine sediments is perpendicular to hill-slope and across-strike in the fluvial and shallow marine environments proximal to the orogen. Fine-grained sediments mainly longitudinally transported into the deep marine environments distal to the orogen. The present sedimentary processes in the over-filled basin on land are dominated by fluvial

  7. Current state of active-fault monitoring in Taiwan

    NASA Astrophysics Data System (ADS)

    Hou, C.; Lin, C.; Chen, Y.; Liu, H.; Chen, C.; Lin, Y.; Chen, C.

    2008-12-01

    The earthquake is one of the major hazard sources in Taiwan where an arc-continent collision is on-going. For the purpose of seismic hazard mitigation, to understand current situation of each already-known active fault is urgently needed. After the 1999 Chi-chi earthquake shocked Taiwan, the Central Geological Survey (CGS) of Taiwan aggressively promoted the tasks on studying the activities of active faults. One of them is the deployment of miscellaneous monitoring networks to cover all the target areas, where the earthquake occurrence potentials on active faults are eager to be answered. Up to the end of 2007, CGS has already deployed over 1000 GPS campaign sites, 44 GPS stations in continuous mode, and 42 leveling transects across the major active faults with a total ground distance of 974 km. The campaign sites and leveling tasks have to be measured once a year. The resulted crustal deformation will be relied on to derive the fault slip model. The time series analysis on continuous mode of GPS can further help understand the details of the fault behavior. In addition, 12 down-hole strain meters, five stations for liquid flux and geochemical proxies, and two for water table monitoring have been also installed to seek possible anomalies related to the earthquake activities. It may help discover reliable earthquake precursors.

  8. A Comparison of Food Supply from 1984 to 2009 and Degree of Dietary Westernization in Taiwan with Asian Countries and World Continents

    PubMed Central

    Peng, Cheau-Jane; Lin, Cheng-Yao; Guo, How-Ran

    2015-01-01

    Objective. To compare quality, quantity, and trends of food supply from 1984 to 2009 and degree of food westernization in Taiwan with Asian countries and world continents by using food balance data. Methods. We compiled data from food balance sheets of Taiwan and Food and Agriculture Organization, including five continents and three most populated countries each in Eastern, Southern, and Southeastern Asia over the period 1984–2009. Quantity of food supply per capita was referenced to Taiwan food guides. The population-weighted means of food supply from Europe, North America, South America, and Australia and New Zealand continents in terms of energy and nutrient distributions, animal/plant sources, and sugar/alcohol contribution were used as indicators of westernization. Trends of food supply per capita of six food groups were plotted, and linear regression was applied to evaluate food changes. Findings. Taiwan's food supply provided sufficient quantity in food energy, with the lowest cereals/roots supply and rice to wheat ratio, but the highest meat and oil supplies per capita among the 10 studied Asian countries. Taiwan food supply showed the most westernization among these countries. Conclusion. Food supply of Taiwan, although currently sufficient, indicated some security problems and high tendency of diet westernization. PMID:26295045

  9. Turbidite geochemistry and evolution of the Izu-Bonin arc and continents

    NASA Astrophysics Data System (ADS)

    Gill, J. B.; Hiscott, R. N.; Vidal, Ph.

    1994-10-01

    The major and trace element and NdPb isotopic composition of Oligocene to Pleistocene volcaniclastic sands and sandstones derived from the Izu Bonin island arc has been determined. Many characteristics of the igneous sources are preserved and record the geochemical evolution of juvenile proto-continental crust in an island arc. After an initial boninitic phase, arc geochemistry has varied primarily as the result of backarc basin formation. The Izu arc source became depleted in incompatible trace elements during backarc basin formation, and re-enriched after spreading stopped in the basin. Renewed rifting during the Pliocene to Recent caused felsic magmatism as a result of easier eruption of differentiates rather than as a result of crustal melting. Four isotopically-distinct source components are recognized. Their combination in the sources of the Izu-Bonin and Mariana arcs initially was similar but diverged after backarc basin formation. The Izu arc turbidites are more similar to Archean than post-Archean sedimentary rocks, indicating that the production of new upper crust at subduction zones has changed little over time. The turbidites are similar in major element composition to average continental crust but are depleted in incompatible trace elements, especially Th and Nb. Consequently, the net effect of adding juvenile arc crust to continents is to reverse the trend of planetary trace element differentiation instead of continuing the process.

  10. Mantle flow and deforming continents, the Tethys realm

    NASA Astrophysics Data System (ADS)

    Jolivet, L.; Faccenna, C.; Becker, T. W.

    2016-12-01

    Continent deformation is partly a consequence of plate motion along plate boundaries. Whether underlying asthenospheric flow can also deform continents through basal shear or push on topographic irregularities of the base of the lithosphere is an open question. Eurasia has been extending at different scales since 50 Ma, from the Mediterranean back-arc domains to extension of Asia between the India-Asia collision zone and the Pacific subduction zones. While compression at plate margins, in subduction or collision zones can propagate far within continents, the mechanism explaining extension distributed over thousands of kilometres is unclear. We use trajectories of continental plates and continental fragments since 50 Myrs in different kinematic frames and compare them with various proxies of asthenospheric flow such as seismic anisotropy at various depths. These trajectories partly fit sub-lithospheric seismic anisotropy with two main circulations, one carrying Africa and Eurasia away from the large low velocity anomaly (LLSVP) underlying South and West Africa and one carrying the Pacific plate away from the LLSVP underlying the southern Pacific. Under eastern Eurasia the flow converges with the Pacific flow and distributed extension affects eastern Asia all the way to Western Pacific back-arc basins. We speculate that the flow carrying India northward and Eurasia eastward has invaded the Pacific domain and caused this widely distributed extension that interferes with the strike-slip faults issued from the Himalaya-Tibet collision zone. This model is in line with earlier propositions based on geochemical proxies. We discuss this model and compare it to other widely distributed extensional deformation episodes such as the Early Cretaceous extension of Africa and finally propose a scheme of large-scale continental deformation in relation to underlying mantle convection at different scales.

  11. Variation of Seismicity and Stresses in Southwestern Taiwan under the Transition from Active to Incipient Collision

    NASA Astrophysics Data System (ADS)

    Tseng, T.; Jian, P.; Liang, W.

    2012-12-01

    Taiwan is formed by oblique convergence between NW moving Philippine Sea Plate and NE striking Eurasia continental margin. The central part of Taiwan still under active collision, but south of the island seismicity already shows eastward subdcution along the Mania Trench. Southwestern Taiwan is a unique location to observe this transition. In this study, we analyze the focal mechanisms earthquakes with ML greater than 3.5 that occurred in the southwestern Taiwan since 1996 (including 2010 M6.4 Jiashian and 2012 M6.1 Wutai earthquakes). The best moment tensor solutions and centroidal depths are constrained by modeling of regional waveform data. The results show detail variations of stress pattern. The Jiashan sequence and those thrusting earthquakes nearby to the south occur mainly at depth of 20-25 km in the mid-lower crust with average ENE-WSW principal compression, which is almost perpendicular to the direction of convergence. It can be distinguished from the shallower thrust events with ESE-WNW compression right north of Jiashan where the upper crust (10-20 km) is more seismically active and seismic stress is consistent with the geodetic stress. Further west near the deformation front, a group of strike-slip events at depth ~15 km shows average compression similar to Jiashan group, suggesting a possible link between them in the middle crust. Interestingly, the crust southwest of Jiasian has much lower seismic rate, however, several deep (>30km) earthquakes beneath Pingtung foredeep basin clearly show E-W extension, which is inconsistent with the E-W compression from present geodetic and Quaternary stress. Surface extrusion proposed by several studies may still exist, although the lower crust and upper mantle beneath this region is probably decoupled from above. These normal events can be explained by the plate bending as the leading South China Sea subducts beneath Philippine Sea. The Jiashian and Wutai earthquakes may be related to the continent-ocean boundary

  12. Depleted deep South China Sea δ13C paleoceanographic events in response to tectonic evolution in Taiwan-Luzon Strait since Middle Miocene

    NASA Astrophysics Data System (ADS)

    Chen, Wen-Huang; Huang, Chi-Yue; Lin, Yen-Jun; Zhao, Quanhong; Yan, Yi; Chen, Duofu; Zhang, Xinchang; Lan, Qing; Yu, Mengming

    2015-12-01

    The most distinctive feature of the deep South China Sea (SCS) paleoceanography is the occurrence of long-term depleted deep-sea benthic foraminiferal δ13C values. They are lower than the global and the Pacific composite records in the last 16 Ma, especially at 13.2, 10.5, 6.5, 3.0 and 1.2-0.4 Ma. This distinct deep SCS paleoceanograhic history coincides with the subduction-collision history in the Taiwan region where waters of the West Pacific (WP) and the SCS exchange. The depleted deep-sea benthic foraminiferal δ13C events indicate that the SCS deep basin became progressively a stagnant environment in the last 16 Ma due to either closure of the connection with the WP bottom water or temporary reduction of the WP deep water flowing into the deep SCS. Both the Taiwan accretionary prism and the Luzon arc became the main tectono-morphological barriers for the WP bottom water flowing into the SCS deep basin when eastward subduction of the SCS oceanic lithosphere beneath the Philippine Sea Plate started from the Middle Miocene (18-16 Ma). This began a long-term trend of depleted SCS deep-sea benthic δ13C values in the last 16 Ma. The oblique arc-continent collision since ~6.5 Ma uplifted the Taiwan accretionary prism rapidly above sea level and further isolated the SCS from the open Pacific. The collision simultaneously causes backthrusting deformations in the North Luzon Trough forearc basin and sequentially closes interarc water gates between volcanic islands from north to south. The Loho and the Taitung interarc water gates in the advanced collision zone were closed at ~3.0 Ma and ~1.2 Ma, coinciding with the very low SCS deep-sea benthic δ13C events at 3.0 and 1.2-0.4 Ma, respectively. The Taitung Canyon between the Lutao and Lanyu volcanic islands in the incipient collision zone is semi-closed presently. These closure events also lead to the result that the WP deep water intrudes westward into the SCS principally through the Bashi Channel between the Lanyu

  13. Petrology and tectonics of Phanerozoic continent formation: From island arcs to accretion and continental arc magmatism

    USGS Publications Warehouse

    Lee, C.-T.A.; Morton, D.M.; Kistler, R.W.; Baird, A.K.

    2007-01-01

    Mesozoic continental arcs in the North American Cordillera were examined here to establish a baseline model for Phanerozoic continent formation. We combine new trace-element data on lower crustal xenoliths from the Mesozoic Sierra Nevada Batholith with an extensive grid-based geochemical map of the Peninsular Ranges Batholith, the southern equivalent of the Sierras. Collectively, these observations give a three-dimensional view of the crust, which permits the petrogenesis and tectonics of Phanerozoic crust formation to be linked in space and time. Subduction of the Farallon plate beneath North America during the Triassic to early Cretaceous was characterized by trench retreat and slab rollback because old and cold oceanic lithosphere was being subducted. This generated an extensional subduction zone, which created fringing island arcs just off the Paleozoic continental margin. However, as the age of the Farallon plate at the time of subduction decreased, the extensional environment waned, allowing the fringing island arc to accrete onto the continental margin. With continued subduction, a continental arc was born and a progressively more compressional environment developed as the age of subducting slab continued to young. Refinement into a felsic crust occurred after accretion, that is, during the continental arc stage, wherein a thickened crustal and lithospheric column permitted a longer differentiation column. New basaltic arc magmas underplate and intrude the accreted terrane, suture, and former continental margin. Interaction of these basaltic magmas with pre-existing crust and lithospheric mantle created garnet pyroxenitic mafic cumulates by fractional crystallization at depth as well as gabbroic and garnet pyroxenitic restites at shallower levels by melting of pre-existing lower crust. The complementary felsic plutons formed by these deep-seated differentiation processes rose into the upper crust, stitching together the accreted terrane, suture and former

  14. Pn tomography of South China Sea, Taiwan Island, Philippine archipelago, and adjacent regions

    NASA Astrophysics Data System (ADS)

    Li, Xibing; Song, Xiaodong; Li, Jiangtao

    2017-02-01

    The South China Sea (SCS) and its surrounding areas are geologically highly heterogeneous from the interactions of multiple plates in Southeast Asia (Eurasian plate, Indian-Australian plate, Philippine Sea plate, and Pacific plate). To understand the tectonics at depth, here we combined bulletin and handpicked data to conduct Pn tomography of the region. The results show distinct features that are correlated with the complex geology at surface, suggesting a lithosphere-scale tectonics of the region. Low Pn velocities are found along a belt of the western Pacific transpressional system from the Okinawa Trough and eastern East China Sea, across central and eastern Taiwan orogeny, to the island arcs of the Luzon Strait and the entire Philippine Islands, as well as under the Palawan Island and part of the continental margin north of the Pearl River Basin. High velocities are found under Ryukyu subduction zone, part of the Philippine subduction zone, part of the Eurasian subduction beneath the southwestern Taiwan, and the continent-ocean boundary between the south China and the SCS basin. The Taiwan Strait, the Mainland SE coast, and the main SCS basin sea are relatively uniform with average Pn values. Crustal thicknesses show large variations in the study region but also coherency with tectonic elements. The Pn pattern in Taiwan shows linear trends of surface geology and suggests strongly lithosphere-scale deformation of the young Taiwan orogenic belt marked by the deformation boundary under the Western Foothill and the Western Coastal Plain at depth, and the crustal thickness shows a complex pattern from the transpressional collision. Our observations are consistent with rifting and extension in the northern margin of the SCS but are not consistent with mantle upwelling as a mechanism for the opening and the subsequent closing of the SCS. The Philippine island arc is affected by volcanisms from both the Asian and Philippine Sea subductions in the south but mainly from

  15. Subduction, erosion and the sediment record: Insights from Miocene sediments, Hengchun Peninsula, Taiwan

    NASA Astrophysics Data System (ADS)

    Kirstein, Linda; Carter, Andrew; Chen, Yue-Gau

    2010-05-01

    Detrital sedimentary records include vast archives of material that have been removed from developing tectonically active regions. These archives have been used to investigate challenging questions on continental deformation, exhumation and palaeodrainage using a variety of different techniques including heavy minerals, fission-track dating and palaeocurrent reconstructions. The Hengchun Peninsula of southern Taiwan and offshore Hengchun Ridge form a present day accretionary prism, with accretionary wedge growth occurring both by frontal accretion, with sediments from the continental margin scraped up into the accretionary wedge and by underplating. Miocene sediments in Hengchun include foreland basin deposits, deep marine turbidites and forearc basin deposits. As a result the detrital sediments record details of accretionary prism growth associated with continued Luzon arc-continent collision. Diametrically opposite palaeocurrents are preserved in the Miocene sandstones of the Hengchun Peninsula, southern Taiwan. Controversial explanations include an exotic source terrane to the south and/or 180 ° rotation of a depositional basin. We document the tecto-thermal evolution of the Miocene sediment source(s) using a double dating approach. U-Pb grain ages range from Miocene to Archaean, while zircon fission-tracks record thermal cooling primarily in the Cretaceous with minor peaks in the Miocene, Triassic, Jurassic and Permian. The primary source of the Miocene sediments at the centre of the controversy was similar. Palaeocurrent data are influenced by local basin geometry and submarine topography and suggest that sediment deposition in the Miocene was strongly controlled by incipient subduction, associated structural trends and submarine topography. A similar control on deposition in the modern Taiwan collision zone is apparent in the offshore region today.

  16. Mantle flow and deforming continents, insights from the Tethys realm

    NASA Astrophysics Data System (ADS)

    Jolivet, Laurent; Faccenna, Claudio; Becker, Thorsten; Tesauro, Magdala

    2017-04-01

    Continent deformation is partly a consequence of plate motion along plate boundaries. Whether underlying asthenospheric flow can also deform continents through basal shear or push on topographic irregularities of the base of the lithosphere is an open question. Eurasia has been extending at different scales since 50 Ma, from the Mediterranean back-arc domains to extension of Asia between the India-Asia collision zone and the Pacific subduction zones. While compression at plate margins, in subduction or collision zones can propagate far within continents, the mechanism explaining extension distributed over thousands of kilometres is unclear. We use trajectories of continental plates and continental fragments since 50 Ma in different kinematic frames and compare them with various proxies of asthenospheric flow such as seismic anisotropy at various depths. These trajectories partly fit sub-lithospheric seismic anisotropy with two main circulations, one carrying Africa and Eurasia away from the large low velocity anomaly (LLSVP) underlying South and West Africa and one carrying the Pacific plate away from the LLSVP underlying the southern Pacific. Under eastern Eurasia the flow converges with the Pacific flow and distributed extension affects eastern Asia all the way to Western Pacific back-arc basins. We speculate that the flow carrying India northward and Eurasia eastward has invaded the Pacific domain and caused this widely distributed extension that interferes with the strike-slip faults issued from the Himalaya-Tibet collision zone. This model is in line with earlier propositions based on geochemical proxies. We discuss this model and compare it to other widely distributed extensional deformation episodes such as the Early Cretaceous extension of Africa and lastly propose a scheme of large-scale continental deformation in relation to underlying mantle convection at different scales.

  17. The Keelung Submarine volcanoes and gas plumes in the nearshore of northern Taiwan

    NASA Astrophysics Data System (ADS)

    Huang, J. C.; Tsia, C. H.; Hsu, S. K.; Lin, S. S.

    2016-12-01

    Taiwan is located in the collision zone between Philippine Sea Plate and Eurasian Plate. The Philippine Sea Plate subducts northward beneath the Ryukyu arc system while the Eurasian Plate subducts eastward beneath the Luzon arc system. The Taiwan mountain building started at 9 My ago and the most active collision has migrated to middle Taiwan. In consequence, the northern Taiwan has changed its stress pattern from forms a series of thrust faults to normal faults. The stress pattern change has probably induced the post-collisional extension and volcanism in and off northern Taiwan. Under such a tectonic environment, the volcanism and gas plumes are widespread in northern Taiwan and its offshore area. Among the volcanoes of the northern Taiwan volcanic zone, the Tatun Volcano Group is the most obvious one. In this study, we use sub-bottom profiler, EK500 echo sounder, and multibeam echo sounder to study the geophysical structure of a submarine volcano in the nearshore of northern Taiwan. We have analyzed the shallow structures and identified the locations of the gas plumes. The identification of the gas plumes can help us understand the nature of the submarine volcano. Our results show that the gas plumes appear near the Kanchiao Fault and Keelung islet. Some intrusive volcanoes can be observed in the subbottom profiler data. Finally, according to the observations, we found that the Keelung Submarine Volcano is still active. We need the monitor of the active Keelung Submarine Volcano to avoid the volcanic hazard. Additionally, we need to pay attention to the earthquakes related to the Keelung Submarine Volcano.

  18. Sm-Nd dating of multiple garnet growth events in an arc-continent collision zone, northwestern U.S. Cordillera

    NASA Astrophysics Data System (ADS)

    Getty, Stephen R.; Selverstone, Jane; Wernicke, Brian P.; Jacobsen, Stein B.; Aliberti, Elaine; Lux, Daniel R.

    1993-03-01

    Integrated petrologic and Sm-Nd isotopic studies in garnet amphibolites along the Salmon River suture zone, western Idaho, delineate two periods of amphibolite grade metamorphism separated by at least 16 million years. In one amphibolite, P-T studies indicate a single stage of metamorphism with final equilibration at ˜600°C and 8 9 kbar. The Sm-Nd isotopic compositions of plagioclase, apatite, hornblende, and garnet define a precise, 8-point isochron of 128±3 Ma (MSWD=1.2) interpreted as mineral growth at the metamorphic peak. A40Ar/39Ar age for this hornblende indicates cooling through ˜525°C at 119±2 Ma. In a nearby amphibolite, garnets with a two-stage growth history consist of inclusion-rich cores surrounded by discontinuous, inclusion-free overgrowths. Temporal constraints for core and overgrowth development were derived from Sm-Nd garnet — whole rock pairs in which the garnet fractions consist of varying proportions of inclusion-free to inclusion-bearing fragments. Three garnet fractions with apparent “ages” of 144, 141, and 136 Ma are thought to represent mixtures between late Jurassic (pre-144 Ma) inherited radiogenic components preserved within garnet cores and early Cretaceous (˜128 Ma) garnet overgrowths. These observations confirm the resilience of garnet to diffusive exchange of trace elements during polymetamorphism at amphibolite facies conditions. Our geochronologic results show that metamorphism of arc-derived rocks in western Idaho was episodic and significantly older than in arc rocks along the eastern margin of the Wrangellian Superterrane in British Columbia and Alaska. The pre-144 Ma event may be an expression of the late Jurassic amalgamation of marginal oceanic arc-related terranes (e.g., Olds Ferry, Baker, Wallowa) during the initial phases of their collision with North American rocks. Peak metamorphism at ˜128 Ma reflects tectonic burial along the leading edge of the Wallowa arc terrane during its final penetration and

  19. Zircon U-Pb ages and petrogenesis of a tonalite-trondhjemite-granodiorite (TTG) complex in the northern Sanandaj-Sirjan zone, northwest Iran: Evidence for Late Jurassic arc-continent collision

    NASA Astrophysics Data System (ADS)

    Azizi, Hossein; Zanjefili-Beiranvand, Mina; Asahara, Yoshihiro

    2015-02-01

    The Ghalaylan Igneous Complex is located in the northern part of the Sanandaj-Sirjan zone (SSZ) in northwest Iran. At the surface, the complex is ellipsoidal or ring-shaped. The igneous rocks, which are medium- to fine-grained, were intruded into a Jurassic metamorphic complex and are cut by younger dikes. Zircon U-Pb ages indicate that the crystallization of the main body occurred from 157.9 ± 1.6 to 155.6 ± 5.6 Ma. The igneous complex includes granodiorite, tonalite, and quartz monzonite, as well as subvolcanic to volcanic rocks such as dacite and rhyolite. The rocks have high concentrations of Al2O3 (15-19 wt.%), SiO2 (65-70 wt.%), and Sr (700-1100 ppm), high (La/Yb)N ratios (15-40), and very low concentrations of MgO (< 0.83 wt.%), Ni (< 7 ppm), and Cr (usually < 50 ppm). There is a lack of negative Eu anomalies. These geochemical features show that the rocks are similar to high-silica adakites and Archaean tonalite-trondhjemite-granodiorite (TTG) rocks. The initial ratios of 87Sr/86Sr and 143Nd/144Nd vary from 0.70430 to 0.70476 and from 0.51240 to 0.51261, respectively, values that are similar to those of primitive mantle and the bulk Earth. The chemical compositions of the igneous rocks of the complex, and their isotope ratios, differ from those of neighboring granitic bodies in the northern SSZ. Based on our results, we suggest a new geodynamic model for the development of this complex, as follows. During the generation of the Songhor-Ghorveh island arc in the Neotethys Ocean, an extensional basin, such as a back-arc, developed between the island arc and the Sanandaj-Sirjan zone (SSZ). As a consequence, basaltic magma was injected from the asthenosphere without the development of a mature oceanic crust. During arc-continent collision in the Late Jurassic, hot basaltic rocks were present beneath the SSZ at depths of 30-50 km, and the partial melting of these rocks led to the development of TTG-type magmas, forming the source of the Ghalaylan Igneous

  20. From subduction to collision: results of French POP2 program on Taiwan-Philippine festoon

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Blanchet, R.; Stephan, J.F.; Rangin, C.

    1986-07-01

    A sea-beam, seismic, magnetic, and gravimetric survey was conducted with the R/V Jean-Charcot in three key regions off the Taiwan-Philippine festoon in the western Pacific: (1) Ryukyu active margin and its junction with Taiwan; (2) northern part of the Manila Trench and its junction with the Taiwan tectonic prism; and (3) southern termination of Manila Trench in front of Mindoro Island. Transitions between active subduction along the Manila Trench and collision of Taiwan and Mindoro, and relations between active subduction and extension in the Okinawa-Ryukyu and the northeastern Taiwan systems are particularly studied.

  1. Detrital zircons from the Tananao metamorphic complex of Taiwan: Implications for sediment provenance and Mesozoic tectonics

    NASA Astrophysics Data System (ADS)

    Yui, T. F.; Maki, K.; Lan, C. Y.; Hirata, T.; Chu, H. T.; Kon, Y.; Yokoyama, T. D.; Jahn, B. M.; Ernst, W. G.

    2012-05-01

    Taiwan formed during the Plio-Pleistocene collision of Eurasia with the outboard Luzon arc. Its pre-Tertiary basement, the Tananao metamorphic complex, consists of the western Tailuko belt and the eastern Yuli belt. These circum-Pacific belts have been correlated with the high-temperature/low-pressure (HT/LP) Ryoke belt and the high-pressure/low-temperature (HP/LT) Sanbagawa belt of Japan, respectively. To test this correlation and to reveal the architecture and plate-tectonic history of the Tananao metamorphic basement, detrital zircons were separated from 7 metasedimentary rock samples for U-Pb dating by LA-ICPMS techniques. Results of the present study, coupled with previous data, show that (1) the Tailuko belt consists of a Late Jurassic to earliest Cretaceous accretionary complex sutured against a Permian-Early Jurassic marble ± metabasaltic terrane, invaded in the north by scattered Late Cretaceous granitic plutons; the latter as well as minor Upper Cretaceous cover strata probably formed in a circum-Pacific forearc; (2) the Yuli belt is a mid- to Late Cretaceous accretionary complex containing HP thrust sheets that were emplaced attending the Late Cenozoic Eurasian plate-Luzon arc collision; (3) these two Late Mesozoic belts are not coeval, and in part were overprinted by low-grade metamorphism during the Plio-Pleistocene collision; (4) accreted clastic sediments of the Tailuko belt contain mainly Phanerozoic detrital zircons, indicating that terrigenous sediments were mainly sourced from western Cathaysia, whereas in contrast, clastic rocks of the Yuli accretionary complex contain a significant amount of Paleoproterozoic and distinctive Neoproterozoic zircons, probably derived from the North China craton and the Yangtze block ± eastern Cathaysia, as a result of continent uplift/exhumation after the Permo-Triassic South China-North China collision; and (5) the Late Jurassic-Late Cretaceous formation of the Tananao basement complex precludes the possibility

  2. Simulation of long-range transport aerosols from the Asian Continent to Taiwan by a southward Asian high-pressure system.

    PubMed

    Chuang, Ming-Tung; Fu, Joshua S; Jang, Carey J; Chan, Chang-Chuan; Ni, Pei-Cheng; Lee, Chung-Te

    2008-11-15

    Aerosol is frequently transported by a southward high-pressure system from the Asian Continent to Taiwan and had been recorded a 100% increase in mass level compared to non-event days from 2002 to 2005. During this time period, PM2.5 sulfate was found to increase as high as 155% on event days as compared to non-event days. In this study, Asian emission estimations, Taiwan Emission Database System (TEDS), and meteorological simulation results from the fifth-generation Mesoscale Model (MM5) were used as inputs for the Community Multiscale Air Quality (CMAQ) model to simulate a long-range transport of PM2.5 event in a southward high-pressure system from the Asian Continent to Taiwan. The simulation on aerosol mass level and the associated aerosol components were found within a reasonable accuracy. During the transport process, the percentage of semi-volatile PM2.5 organic carbon in PM2.5 plume only slightly decreased from 22-24% in Shanghai to 21% near Taiwan. However, the percentage of PM2.5 nitrate in PM2.5 decreased from 16-25% to 1%. In contrast, the percentage of PM2.5 sulfate in PM2.5 increased from 16-19% to 35%. It is interesting to note that the percentage of PM2.5 ammonium and PM2.5 elemental carbon in PM2.5 remained nearly constant. Simulation results revealed that transported pollutants dominate the air quality in Taipei when the southward high-pressure system moved to Taiwan. Such condition demonstrates the dynamic chemical transformation of pollutants during the transport process from continental origin over the sea area and to the downwind land.

  3. Teleseismic P-wave tomography of the Sunda-Banda Arc subduction zone

    NASA Astrophysics Data System (ADS)

    Harris, C. W.; Miller, M. S.; Widiyantoro, S.; Supendi, P.; O'Driscoll, L.; Roosmawati, N.; Porritt, R.

    2017-12-01

    The Sunda-Banda Arc is the site of multiple ongoing tectonic deformation processes and is perhaps the best example of the transition from subduction of oceanic lithosphere to an active arc-continent collision. Investigating the mantle structure that has resulted from the collision of continental Australia, as well as the concurrent phenomena of continental subduction, slab-rollback, lithospheric tearing, and subduction polarity reversal is possible through seismic tomography. While both regional scale and global tomographic models have previously been constructed to study the tectonics this region, here we use 250 seismic stations that span the length of this convergent margin to invert for P-wave velocity perturbations in the upper mantle. We combine data from a temporary deployment of 30 broadband instruments as part of the NSF-funded Banda Arc Project, along with data from permanent broadband stations maintained by the Meteorological, Climatological, and Geophysical Agency of Indonesia (BMKG) to image mantle structure, in particular the subducted Indo-Australian plate. The BMKG dataset spans 2009-2017 and includes >200 broadband seismometers. The Banda Arc array (network YS) adds coverage and resolution to southeastern Indonesia and Timor-Leste, where few permanent seismometers are located but the Australian continent-Banda Arc collision is most advanced. The preliminary model was computed using 50,000 teleseismic P-wave travel-time residuals and 3D finite frequency sensitivity kernels. Results from the inversion of the combined dataset are presented as well as resolution tests to assess the quality of the model. The velocity model shows an arcuate Sunda-Banda slab with morphological changes along strike that correlate with the tectonic collision. The model also features the double-sided Molucca Sea slab and regions of high velocity below the bottom of the transition zone. The resolution added by the targeted USC deployment is clear when comparing models that

  4. Processes in continental collision zones: Preface

    NASA Astrophysics Data System (ADS)

    Zheng, Yong-Fei; Zhang, Lifei; McClelland, William C.; Cuthbert, Simon

    2012-04-01

    Formation and exhumation of high-pressure (HP) to ultrahigh-pressure (UHP) metamorphic rocks in continental subduction zones are the two fundamental geodynamic aspects of collisional orogensis. This volume is based on the Session 08c titled "Geochemical processes in continental collision zones" at Goldschmidt 2010 in Knoxville, USA. It focuses on micro- to macro-scale processes that are temporally and spatially linked to different depths of crustal subduction/exhumation and associated mineralogical changes. They are a key to understanding a wide spectrum of phenomena, involving HP/UHP metamorphism and syn-/post-collisional magmatism. Papers in this volume report progresses in petrological, geochronological and geochemical studies of UHP metamorphic rocks and their derivatives in China, with tectonic settings varying from arc-continent collision to continent-continent collision. Microbeam in-situ analyses of metamorphic and magmatic minerals are successfully utilized to solve various problems in the study of continental deep subduction and UHP metamorphism. In addition to their geochronological applications to dating of HP to UHP metamorphic events during continental collision, microbeam techniques have also served as an efficient means to recognize different generations of mineral growth during continental subduction-zone metamorphism. Furthermore, metamorphic dehydration and partial melting of UHP metamorphic rocks during subduction and exhumation are highlighted with respect to their effects on fluid action and element mobilization. These have provided new insights into chemical geodynamics in continental subduction zones.

  5. Geodynamic evolution of the Taiwan-Luzon-Mindoro belt since the late eocene

    NASA Astrophysics Data System (ADS)

    Stephan, Jean François; Blanchet, René; Rangin, Claude; Pelletier, Bernard; Letouzey, Jean; Muller, Carla

    1986-05-01

    The structural framework of the Taiwan-Luzon-Mindoro belt (or festoon) is described, following three major transects: the Luzon transect with active subduction and active island arc; the Taiwan transect with active collision; the Mindoro transect with active subduction and inactive collision. Based on this geological study and on available geophysical data, a model for the geodynamic evolution of this portion of the Philippine Sea and Eurasia Plates boundary is proposed in a succession of reconstructions between the Late Eocene and the Present. The major geodynamic events are: (1) beginning of the opening of the South China Sea (S.C.S.) in Lower Oligocene times, contemporaneous with obduction of the Zambales and Angat ophiolites on Luzon. (2) subduction of a Mesozoic (?) oceanic basin along the proto-Manila trench from the Upper Oligocene to the Lower Miocene. (3) obduction of the South China Sea oceanic crust onto the Chinese and Reed Bank—Calamian passive margins in Middle Miocene time (14-15 Ma) related to a major kinematic reorganization (end of opening of the S.C.S.). (4) beginning of collision between the Luzon microblock and the two margins of the S.C.S. in the Upper Miocene (~ 7 Ma); collision is still active in Taiwan whereas it stopped in Mindoro during the Pliocene.

  6. Towards Understanding the Sunda and Banda Arcs

    NASA Astrophysics Data System (ADS)

    Hall, R.

    2014-12-01

    The present change from oceanic subduction beneath the Sunda Arc to arc-continent collision east of Sumba is merely the latest stage in a complex collision history that began more than 20 million years ago. Understanding present-day tectonics requires restoring the pre-collisional margins and unravelling the history of the entire Sunda-Banda Arc, not just a segment centred on Sumba. Seismic tomography displays a single folded slab beneath the Banda Arc around which mantle has flowed. Above this is a wide actively deforming zone of complex geology. Australian crust was first added to the Sunda margin in the Cretaceous. Early Miocene closure of the oceanic gap north of Australia led to further additions of continental crust during collision of the Sula Spur. Few microcontinental fragments were sliced from New Guinea as commonly interpreted. Most are parts of the Sula Spur fragmented by extension and strike-slip faulting during development of subduction zones and rollback into the Banda embayment. Many metamorphic 'basement' rocks are significantly younger than expected. They were metamorphosed during multiple episodes of extension which also exhumed the sub-lithospheric mantle, melted the deep continental crust, created new ocean basins, and dispersed continental crust throughout the inner and outer arc, and forearc, so that in places Australian crust is colliding with Australian crust. Thus, many of the arc volcanoes are built on continental not oceanic crust, and sediment eroded from recently emergent islands is compositionally different to subducted sediment that contributed to arc magmas. The published literature is inadequate. New fieldwork and data are required, particularly in remote areas, with integration of information from a variety of sources (e.g. industry seismic and multibeam bathymetry, remotely acquired imagery) and sub-disciplines (e.g. geochronology, geochemistry, seismology, modelling). No single methodology can provide a complete solution.

  7. Arc-arc collision ongoing in the southernmost part of the Kuril trench region revealed from integrated analyses of the 1998-2000 Hokkaido Transect seismic data

    NASA Astrophysics Data System (ADS)

    Iwasaki, T.; Tsumura, N.; Ito, T.; Sato, H.; Kurashimo, E.; Hirata, N.; Arita, K.; Noda, K.; Fujiwara, A.; Abe, S.; Kikuchi, S.; Suzuki, K.

    2014-12-01

    The oblique subduction of the Pacific plate beneath the southernmost part of the Kuril trench is generating a unique tectonic environment in the Hokkaido Island, Japan. In this area, the Kuril forearc sliver started to collide against Northeast (NE) Japan arc from the east at the time of middle Miocene to form the Hidaka collision zone (HCZ). This collision has been acting as a responsible factor for the westward obduction of the crustal rocks of the Kuril arc (the Hidaka metamorphic belt (HMB)) along the Hidaka main thrust (HMT) and the development of the thick foreland fold-and-thrust belt. A multi-disciplinary project of the 1998-2000 Hokkaido Transect, crossing the northern part of the HCZ in EW direction, collected high-quality seismic data on a 227-km seismic refraction/wide-angle reflection profile and three seismic reflection lines. Reprocessing/reinterpretation for this data set revealed detailed collision structure ongoing in the northern part of the HCZ. The westward obduction of the Kuril arc crust was clearly imaged along the HMT. This obduction starts at a depth of 27-30 km, much deeper than in the southern HCZ (23-25 km). In the west of the HMT, we recognize the gently eastward dipping structure, representing the fragments of Cretaceous subduction/arc complexes or deformation interfaces branched from the HMT. The most important finding from our reprocessing is a series of reflection events at a 30-45 km depth below the obducted Kuril arc crust, which probably correspond to the lower crust/Moho within the NE Japan arc descending down to the east under the collision zone. The wide-angle reflection data indicate that the subducted NE Japan arc meets the Kuril arc 30-40 km east of the HMT at a depth of 30 km. This structural geometry well explained a weak but coherent seismic phase observed at far offsets (120-180 km) on the wide-angle reflection line. The obtained structure shows the complicated collision style where the upper 30-km Kuril arc crust is

  8. Arc-arc Collision Structure in the Southernmost Part of the Kuril Trench Region -Results from Integrated Analyses of the 1998-2000 Hokkaido Transect Seismic Data-

    NASA Astrophysics Data System (ADS)

    Iwasaki, Takaya; Tsumura, Noriko; Ito, Tanio; Sato, Hiroshi; Kurashimo, Eiji; Hirata, Naoshi; Arita, Kazunori; Noda, Katsuya; Fujiwara, Akira; Abe, Susumu; Kikkuchi, Shunsuke; Suzuki, Kazuko

    2015-04-01

    The Hokkaido Island, located in the southernmost part of the Kuril trench region, has been under a unique tectonic environment of arc-arc collision. Due to the oblique subduction of the Pacific (PAC) plate, the Kuril forearc sliver started to collide against Northeast (NE) Japan arc from the east at the time of middle Miocene to form complicated structures in the Hidaka collision zone (HCZ), as characterized by the westward obduction of the crustal rocks of the Kuril arc (the Hidaka metamorphic belt (HMB)) along the Hidaka main thrust (HMT) and a thick foreland fold-and-thrust belt. In and around the HCZ, a series of seismic reflection/refraction experiments were undertaken from 1994 to 2000, which provided important structural features including crustal delamination in the southern HCZ and a thick fold-and-thrust belt with velocity reversals (low velocity layers) in the northern HCZ. Reprocessing/reinterpretation for these data sets, which started in 2012, is aimed to construct a more detailed collision model through new processing and interpretation techniques. A multi-disciplinary project of the 1998-2000 Hokkaido Transect, crossing the northern part of the HCZ in EW direction, collected high-quality seismic data on a 227-km seismic refraction/wide-angle reflection profile and three seismic reflection lines. Our reanalyses revealed interesting collision structure ongoing in the northern part of the HCZ. The westward obduction of the Kuril arc crust was clearly imaged along the HMT. This obduction occurs at a depth of 27-30 km, much deeper than in the southern HCZ (23-25 km). The CRS/MDRS processing to the reflection data firstly succeeded in imaging clear reflection events at a 30-45 km depth below the obducted Kuril arc crust. These events show an eastward dip, probably corresponding to the lower crust/Moho within the NE Japan arc descending down to the east under the collision zone. Gently eastward dipping structures above these events (in a depth range of 5

  9. Fault zone structure and inferences on past activities of the active Shanchiao Fault in the Taipei metropolis, northern Taiwan

    NASA Astrophysics Data System (ADS)

    Chen, C.; Lee, J.; Chan, Y.; Lu, C.

    2010-12-01

    The Taipei Metropolis, home to around 10 million people, is subject to seismic hazard originated from not only distant faults or sources scattered throughout the Taiwan region, but also active fault lain directly underneath. Northern Taiwan including the Taipei region is currently affected by post-orogenic (Penglai arc-continent collision) processes related to backarc extension of the Ryukyu subduction system. The Shanchiao Fault, an active normal fault outcropping along the western boundary of the Taipei Basin and dipping to the east, is investigated here for its subsurface structure and activities. Boreholes records in the central portion of the fault were analyzed to document the stacking of post- Last Glacial Maximum growth sediments, and a tulip flower structure is illuminated with averaged vertical slip rate of about 3 mm/yr. Similar fault zone architecture and post-LGM tectonic subsidence rate is also found in the northern portion of the fault. A correlation between geomorphology and structural geology in the Shanchiao Fault zone demonstrates an array of subtle geomorphic scarps corresponds to the branch fault while the surface trace of the main fault seems to be completely erased by erosion and sedimentation. Such constraints and knowledge are crucial in earthquake hazard evaluation and mitigation in the Taipei Metropolis, and in understanding the kinematics of transtensional tectonics in northern Taiwan. Schematic 3D diagram of the fault zone in the central portion of the Shanchiao Fault, displaying regional subsurface geology and its relation to topographic features.

  10. Geology of the d'Entrecasteaux-New Hebrides arc collision zone: results from a deep submersible survey

    USGS Publications Warehouse

    Collot, J.-Y.; Lallemand, S.; Pelletier, B.; Bissen, J.-P.; Glacon, G.; Fisher, M.A.; Greene, H. Gary; Boulin, J.; Daniel, J.; Monzier, M.

    1992-01-01

    During the SUBPSO1 cruise, seven submersible dives were conducted between water depths of 5350 and 900 m over the collision zone between the New Hebrides island arc and the d'Entrecasteaux Zone (DEZ). The DEZ, a topographic high on the Australian plate, encompasses the North d'Entrecasteaux Ridge (NDR) and the Bougainville guyot, both of which collide with the island-are slope. In this report we use diving observations and samples, as well as dredging results, to analyse the geology of the Bougainville guyot and the outer arc slope in the DEZ-arc collision zone, and to decipher the mechanisms of scamount subduction. These data indicate that the Bougainville guyot is a middle Eocene island arc volcano capped with reef limestones that appear to have been deposited during the Late Oligocene to Early Miocene and in Miocene-Pliocene times. This guyot possibly emerged during the Middle and Late Miocene, and started to sink in the New Hebrides trench after the Pliocene. The rocks of the New Hebrides arc slope, in the collision zone, consist primarily of Pliocene-Recent volcaniclastic rocks derived from the arc, and underlying fractured island-arc volcanic basement, possibly of Late Miocene age. However, highly sheared, Upper Oligocene to Lower Miocene nannofossil ooze and chalk are exposed at the toe of the arc slope against the northern flank of the NDR. Based on a comparison with cores collected at DSDP Site 286, the ooze and chalk can be interpreted as sediments accreted from the downgoing plate. East of the Bougainville guyot an antiform that developed in the arc slope as a consequence of the collision reveals a 500-m-thick wedge of strongly tectonized rocks, possibly accreted from the guyot or an already subducted seamount. The wedge that is overlain by less deformed volcaniclastic island-arc rocks and sediments includes imbricated layers of Late Oligocene to Early Miocene reef and micritic limestones. This wedge, which develops against the leading flank of the guyot

  11. Imaging the Crust and Upper Mantle of Taiwan with Ambient Noise and Full Waveform Tomography

    NASA Astrophysics Data System (ADS)

    Rodzianko, A.; Roecker, S. W.

    2013-12-01

    Taiwan is the result of a complex, actively deforming tectonic boundary between the Eurasian and Philippine Sea plates that provides an excellent venue for investigating processes related to arc-continent collision. The TAIGER (TAiwan Integrated GEodynamics Research) project deployed broadband and short-period seismic stations that observed passive and active sources between 2006-2008. We analyze data collected by the TAIGER deployment, supplemented by observations from the permanent BATS (Broadband Array in Taiwan for Seismology) network, to create a 3D elastic wave velocity model of the crust and upper mantle beneath Taiwan. We start by applying ambient noise tomography techniques on the dataset to create a 3D Vs model. The vertical component of continuous ambient noise is whitened and cross-correlated between stations to construct empirical Green's functions (EGFs) of Rayleigh waves, which are graded by the signal to noise (SNR) ratio prior to recovering group and phase velocities of the fundamental mode for periods between 6 and 30 seconds. We invert group and phase velocity maps on a regular grid with 5 km spacing, and combine the results to generate a 3D Vs model. This model, combined with the arrival time model of Hao et al (2012), are used as a starting model for full waveform inversion (FWI) of teleseismic body and surface waves using the 2.5D technique of Roecker et al (2010). We find that below the Central Mountain Range, the crust thickens with the Moho at ~50 km depth and with S-wave speeds ~3.0 km/s, indicating a deep crustal root. The west half of the island is generally characterized by a thinner crust and relatively lower S-wave velocities.

  12. A Multi-scale Finite-frequency Approach to the Inversion of Reciprocal Travel Times for 3-D Velocity Structure beneath Taiwan

    NASA Astrophysics Data System (ADS)

    Chang, Y.; Hung, S.; Kuo, B.; Kuochen, H.

    2012-12-01

    Taiwan is one of the archetypical places for studying the active orogenic process in the world, where the Luzon arc has obliquely collided into the southwest China continental margin since 5 Ma ago. Because of the lack of convincing evidence for the structure in the lithospheric mantle and at even greater depths, several competing models have been proposed for the Taiwan mountain-building process. With the deployment of ocean-bottom seismometers (OBSs) on the seafloor around Taiwan from the TAIGER (TAiwan Integrated GEodynamic Research) and IES seismic experiments, the aperture of the seismic network is greatly extended to improve the depth resolution of tomographic imaging, which is critical to illuminate the nature of the arc-continent collision and accretion in Taiwan. In this study, we use relative travel-time residuals between a collection of teleseismic body wave arrivals to tomographically image the velocity structure beneath Taiwan. In addition to those from common distant earthquakes observed across an array of stations, we take advantage of dense seismicity in the vicinity of Taiwan and the source and receiver reciprocity to augment the data coverage from clustered earthquakes recorded by global stations. As waveforms are dependent of source mechanisms, we carry out the cluster analysis to group the phase arrivals with similar waveforms into clusters and simultaneously determine relative travel-time anomalies in the same cluster accurately by a cross correlation method. The combination of these two datasets would particularly enhance the resolvability of the tomographic models offshore of eastern Taiwan, where the two subduction systems of opposite polarity are taking place and have primarily shaped the present tectonic framework of Taiwan. On the other hand, our inversion adopts an innovation that invokes wavelet-based, multi-scale parameterization and finite-frequency theory. Not only does this approach make full use of frequency-dependent travel

  13. Upper and middle crustal deformation of an arc arc collision across Hokkaido, Japan, inferred from seismic refraction/wide-angle reflection experiments

    NASA Astrophysics Data System (ADS)

    Iwasaki, Takaya; Adachi, Keiji; Moriya, Takeo; Miyamachi, Hiroki; Matsushima, Takeshi; Miyashita, Kaoru; Takeda, Testsuya; Taira, Takaaki; Yamada, Tomoaki; Ohtake, Kazuo

    2004-09-01

    The Hidaka Collision Zone (HCZ), central Hokkaido, Japan, is a good target for studies of crustal evolution and deformation processes associated with an arc-arc collision. The collision of the Kuril Arc (KA) with the Northeast Japan Arc (NJA), which started in the middle Miocene, is considered to be a controlling factor for the formation of the Hidaka Mountains, the westward obduction of middle/lower crustal rocks of the KA (the Hidaka Metamorphic Belt (HMB)) and the development of the foreland fold-and-thrust belt on the NJA side. The "Hokkaido Transect" project undertaken from 1998 to 2000 was a multidisciplinary effort intended to reveal structural heterogeneity across this collision zone by integrated geophysical/geological research including seismic refraction/reflection surveys and earthquake observations. An E-W trending 227 km-long refraction/wide-angle reflection profile found a complicated structural variation from the KA to the NJA across the HCZ. In the east of the HCZ, the hinterland region is covered with 4-4.5 km thick highly undulated Neogene sedimentary layers, beneath which two eastward dipping reflectors were imaged in a depth range of 10-25 km, probably representing the layer boundaries of the obducting middle/lower crust of the KA. The HMB crops out on the westward extension of these reflectors with relatively high Vp (>6.0 km/s) and Vp/Vs (>1.80) consistent with middle/lower crustal rocks. Beneath these reflectors, more flat and westward dipping reflector sequences are situated at the 25-27 km depth, forming a wedge-like geometry. This distribution pattern indicates that the KA crust has been delaminated into more than two segments under our profile. In the western part of the transect, the structure of the fold-and-thrust belt is characterized by a very thick (5-8 km) sedimentary package with a velocity of 2.5-4.8 km/s. This package exhibits one or two velocity reversals in Paleogene sedimentary layers, probably formed by imbrication

  14. Investigation of Tectonic Boundaries in Taiwan Obtained with a Hierarchical Clustering of Dense GNSS Data

    NASA Astrophysics Data System (ADS)

    Takahashi, A.; Hashimoto, M.; Hu, J. C.; Fukahata, Y.

    2017-12-01

    Taiwan Island is composed of many geological structures. The main tectonic feature is the collision of the Luzon volcanic arc with the Eurasian continent, which propagates westward and generates complicated crustal deformation. One way to model crustal deformation is to divide Taiwan island into man rigid blocks that moves relatively each other along the boundaries (deformation zones) of the blocks. Since earthquakes tend to occur in the deformation zones, identification of such tectonic boundaries is important. So far, many tectonic boundaries have been proposed on the basis of geology, geomorphology, seismology and geodesy. However, which is the most significant boundary depends on disciplines and there is no way to objectively classify them. Here, we introduce an objective method to identify significant tectonic boundaries with a hierarchical representation proposed by Simpson et al. [2012].We apply a hierarchical agglomerative clustering algorithm to dense GNSS horizontal velocity data in Taiwan. One of the significant merits of the hierarchical representation of the clustering results is that we can consistently explore crustal structures from larger to smaller scales. This is because a higher hierarchy corresponds to a larger crustal structure, and a lower hierarchy corresponds to a smaller crustal structure. Relative motion between clusters can be obtained from this analysis.The first major boundary is identified along the eastern margin of the Longitudinal Valley, which corresponds to the separation of the Philippine Sea plate and the Eurasian continental margin. The second major boundary appears along the Chaochou fault and the Chishan fault in southwestern Taiwan. The third major boundary appears along the eastern margin of the coastal plane. The identified major clusters can be divided into several smaller blocks without losing consistency with geological boundaries. For example, the Fengshun fault, concealed beneath thick sediment layers, is identified

  15. Low-latitude arc-continent collision as a driver for global cooling.

    PubMed

    Jagoutz, Oliver; Macdonald, Francis A; Royden, Leigh

    2016-05-03

    New constraints on the tectonic evolution of the Neo-Tethys Ocean indicate that at ∼90-70 Ma and at ∼50-40 Ma, vast quantities of mafic and ultramafic rocks were emplaced at low latitude onto continental crust within the tropical humid belt. These emplacement events correspond temporally with, and are potential agents for, the global climatic cooling events that terminated the Cretaceous Thermal Maximum and the Early Eocene Climatic Optimum. We model the temporal effects of CO2 drawdown from the atmosphere due to chemical weathering of these obducted ophiolites, and of CO2 addition to the atmosphere from arc volcanism in the Neo-Tethys, between 100 and 40 Ma. Modeled variations in net CO2-drawdown rates are in excellent agreement with contemporaneous variation of ocean bottom water temperatures over this time interval, indicating that ophiolite emplacement may have played a major role in changing global climate. We demonstrate that both the lithology of the obducted rocks (mafic/ultramafic) and a tropical humid climate with high precipitation rate are needed to produce significant consumption of CO2 Based on these results, we suggest that the low-latitude closure of ocean basins along east-west trending plate boundaries may also have initiated other long-term global cooling events, such as Middle to Late Ordovician cooling and glaciation associated with the closure of the Iapetus Ocean.

  16. Origin, transport, and emplacement of an exotic island-arc terrane exposed in eastern Kamchatka, Russia

    USGS Publications Warehouse

    Geist, Eric L.; Vallier, Tracy L.; Scholl, David W.

    1994-01-01

    The regional stratigraphy of eastern Kamchatka includes an exotic, Early-Late Cretaceous ophiolite and Late Cretaceous island-arc volcanic sequence. Integrating the existing geologic and geophysical data, we examine the origin, transport, emplacement, and postemplacement deformation of the island-arc terrane, which is named the Olyutorsky island arc. Results from several paleomagnetic studies consistently indicate that the island-arc terrane originated >1000 km to the south of where it is presently exposed. Although the formative paleolatitudes of the island-arc rocks approximately correspond to the location of the Izanagi-Farallon subduction zone, the age of the volcanic rocks postdates the cessation of Izanagi-Farallon convergence, thus indicating that an unnamed plate or back-arc basin existed in the northwest Pacific during Late Cretaceous time. We examine two possible models for northward transport of the island-arc terrane to Kamchatka: (1) infra-oceanic transport with the Pacific or Kula plates and (2) coastwise translation of the island-arc terrane after accretion to the Eurasian margin far to the south of Kamchatka. For both models, the dominant Eocene and Miocene deformation ages observed in eastern Kamchatka are used as two possible age limits for the cessation of northward transport. Although the observed paleolatitudes from paleomagnetic data correspond best with the infra-oceanic transport model, the provenance of the Paleogene "transport" stratigraphy indicates a near-shore sediment supply. Our preferred interpretation is that the island-arc terrane (1) accreted onto the Eurasian margin concurrent with cessation of island-arc volcanism (Maastrichtian-Danian) and (2) underwent northward coastwise translation along a major strike-slip fault zone ending by middle-late Eocene time (43-50 Ma). It is unclear whether the ophiolite was exposed during arc-continent collision or whether the ophiolite was obducted onto the island arc prior to collision. A

  17. Continent-Ocean Interactions Within East Asian Marginal Seas

    NASA Astrophysics Data System (ADS)

    Clift, Peter; Kuhnt, Wolfgang; Wang, Pinxian; Hayes, Dennis

    The study of the complex interactions between continents and oceans has become a leading area for 21st century earth cience. In this volume, continent—ocean interactions in tectonics, arc-continent collision, sedimentology, and climatic volution within the East Asian Marginal Seas take precedence. Links between oceanic and continental climate, the sedimentology of coastal and shelf areas, and the links between deformation of continental and oceanic lithosphere are also discussed. As an introduction to the science presented throughout the volume, Wang discusses many of the possible interactions between the tectonic evolution of Asia and both regional and global climate. He speculates that uplift of central Asia in the Pliocene may have triggered the formation of many of the major rivers that drain north through Siberia into the Arctic Ocean. He also argues that it is the delivery of this fresh water that allows the formation of sea ice in that area and triggered the start of Northern Hemispheric glaciation. This may be one of the most dramatic ways in which Asia has shaped the Earth's climate and represents an alternative to the other competing models that have previously emphasized the role of oceanic gateway closure in Central America. Moreover, his proposal for major uplift of at least part of Tibet and Mongolia as late as the Pliocene, based on the history of drainage evolution in Siberia, supports recent data from the southern Tarim Basin and from the Qilian Shan and Qaidam and Jiuxi Basins in northeast Tibet that indicate surface uplift at that time. Constraining the timing and patterns of Tibetan surface uplift is crucial to testing competing models for strain accommodation in Asia following India—Asia collision.

  18. Pseudotachylyte in the Tananao Metamorphic Complex, Taiwan: Occurrence and dynamic phase changes of fossil earthquakes

    NASA Astrophysics Data System (ADS)

    Chu, Hao-Tsu; Hwang, Shyh-Lung; Shen, Pouyan; Yui, Tzen-Fu

    2012-12-01

    Pseudotachylyte veins and cataclasites were studied in the mylonitized granitic gneiss of the Tananao Metamorphic Complex at Hoping, Eastern Taiwan. The aphanitic pseudotachylyte veins vary in thickness, ranging from millimeters to about 1 cm. Field and optical microscopic observations show that such pseudotachylyte veins cut across cataclasites, which, in turn, transect the mylonitized granitic gneiss. Scanning electron microscopic images also show that both the pseudotachylyte veins and the cataclasites have been metasomatized by a K-rich fluid, resulting in the replacement of Na-plagioclase by K-feldspar (veins). Analytical electron microscopic observations reveal further details of physical and chemical changes (mainly fragmentation, dislocations, cleaving-healing with inclusions and relic voids, and retention of high-temperature albite) of quartz and feldspar in crushed grains. Pseudotachylytes occur as dark veins having a higher content of chlorite-biotite, clinozoisite-epidote and titanite fragments than cataclasites. These veins, coupled with hematite/jarosite-Fe-rich amorphous shell/carbonaceous material, indicate that crushing, healing/sintering, and inhomogeneous melt/fluid infiltration involving incipient and intermediate/high temperature melt patches, before and/or contemporaneous with the metasomatic K-rich fluid, prevailed in a coupled or sequential manner in the faulting event to form nonequilibrium phase assemblage. The chlorite-biotite, carbonaceous material and other nanoscale minerals could be vulnerable in future earthquakes under the influence of water. The timing of the formation of these pseudotachylyte veins should be later than the area's age of mylonitization of granitic gneiss of approximately 4.1-3.0 Ma (Wang et al., 1998). The formation of pseudotachylytes registers the fossil earthquakes during early stages in the exhumation history of the uplifting Taiwan Mountain belt since the Plio-Pleistocene Arc-Continent collision.

  19. How fast is the denudation of the Taiwan Mountains? (Invited)

    NASA Astrophysics Data System (ADS)

    Siame, L. L.; Derrieux, F.; KANG, C.; Bourles, D. L.; Braucher, R.; Léanni, L.; Chen, R.; Lee, J.; Chu, H.; Chang, C.; Byrne, T. B.

    2013-12-01

    Orogenic settings are particularly well suited to study and quantify the coupling relations between tectonics, topography, climate and erosion since they record tectonic evolution along convergent margins and the connection between deep and surface processes. However, the interaction of deep and shallow processes is still poorly understood and the role they play in the exhumation of rocks, the structural and kinematic evolution of orogenic wedges, and the relation between tectonics and climate-dependent surface processes are still debated. Therefore, quantification of denudation rates in a wide range of climatic and tectonic settings, as well as at various time and space scales, is a critical step in calibrating and validating landscape evolution models. In this study, we focus on the mountains of the arc-continent collision in Taiwan, which serve as one of the best examples in the world to understand and study mountain building processes. We investigate the pattern and magnitude of denudation rates at the scale of the orogenic system, deriving denudation rates from in situ-produced cosmogenic nuclide 10Be concentrations measured in (1) river-borne quartz minerals sampled at major watersheds outlets, and (2) bedrock outcrops along ridge crests and at summits located along the major drainage divide of the belt. We determined a denudation pattern showing a clear discrepancy between the western (1.7×0.2 mm/yr) and eastern (4.1×0.5 mm/yr) sides of the range. Conversely, bedrock denudation determined along ridge crests, summits and flat surfaces preserved at high elevations are characterized by significantly lower denudation rates on the order of 0.24×0.03 mm/yr. Altogether, the cosmogenic-derived denudation pattern at the orogen-scale reflects fundamental mountain building processes from frontal accretion in the Western Foothills to basal accretion and fast exhumation in the Central Range. Applied to the whole orogen, such field-based approach thus provides

  20. Constraints of lithium isotopes on petrogenesis of the Northern Luzon arc in Eastern Taiwan

    NASA Astrophysics Data System (ADS)

    Hsiao, C. C.; Chu, M. F.; Lai, Y. M.; Lin, T. H.

    2017-12-01

    Lithium stable isotopes have great potential as a tracer of terrestrial materials in crust-mantle recycling. However, the causes of their variations in arc magmatism remain controversial. The Northern Luzon arc has long been demonstrated incorporation of the sediment melt into its sub-arc mantle. The Li isotopes of volcanic rocks in the Coastal Range, located in Eastern Taiwan, thus are studied to examine the effects of sediment melt on the evolution of Li isotopes in subduction zone and also to constrain the petrogenesis of the northernmost part of Northern Luzon arc. It is worth to note that we had ruled out samples that were significantly influenced by crustal contamination according to the proportion of inherited zircons, trace-elemental and Sr-Nd isotopic geochemistry. Concerning that Li isotopic fractionation is negligible during fractional crystallization and partial melting, the variation of Li/Y and δ7Li in rock samples of this study mainly reflects the geochemistry of magma sources. The overall range of δ7Li is very restricted (δ7Li = +2.9 +5.8) and consistent with that of N-MORB. In addition, ɛNd of the Coastal Range volcanic rocks lowers not only with increasing values of sediment-melt indicators (e.g., Th/Ce, Th/Yb and La/Sm), but also Li/Y (from 0.5 to 1.1 ppm). This suggests the involvement of sediment melt with equivalent δ7Li to and higher Li/Y than those of N-MORB, in magma source of the Coastal Range arc volcanism. In summary, the Li isotopic compositions of the Coastal Range volcanic rocks demonstrate that (1) Li/Y commonly treated as a tracer of fluid in arc magmatism indeed can be significantly affected by the input of sediment melt as well, and (2) sediment melt played a key role in the evolution of Li/Y and lithium isotopes in the mantle wedge, but showed least influence on Li isotopic variation possibly as a result of the similarity between δ7Li of sediments subducted and of the upper mantle.

  1. Stress tensor analysis in the Taiwan area from focal mechanisms of earthquakes

    NASA Astrophysics Data System (ADS)

    Yih-Hsiung, Yeh; Eric, Barrier; Cheng-Horng Lin; Jacques, Angelier

    1991-12-01

    We produce a map of the stress pattern in and around Taiwan based on 200 earthquake focal mechanism solutions. These solutions were determined by using data from Taiwan Telemetered Seismographic Network, microearthquake surveys and WWSSN. The stresses are derived through a minimization of angles between the slip vector and the shear stress on each nodal plane considered as a fault, employing appropriate weighting factors. The whole set of focal mechanisms is divided into several groups, mainly according to apparent clustering of the event locations. The results show that the direction of maximum principal stress in Taiwan area is nearly horizontal and SE-NW on average. This is in good agreement with the direction of relative motion between the Philippine Sea plate and the Eurasian plate. In western Taiwan, the fan-shaped distribution of the maximum principal stress is consistent with the direction of Philippine Sea-Eurasian plate convergence through a simple model of viscous material indented by a rigid wedge. In the northeastern part of Taiwan, a nearly horizontal minimum principal stress oriented N-S is found for shallow depths; it occurs in a region of low seismic velocities, probably related to the back-arc activity of the Okinawa Trough. Down-dip compressional and down-dip extensional stresses have been identified in different depth ranges within the subducting slab of the Philippine Sea plate in the northern Taiwan; this may reflect the slab characteristics in this area. A complex stress pattern prevails in the Hualien area, at the junction between the Ryukyu subduction system and the Taiwan collision zone.

  2. Shear concentration in a collision zone: kinematics of the Chihshang Fault as revealed by outcrop-scale quantification of active faulting, Longitudinal Valley, eastern Taiwan

    NASA Astrophysics Data System (ADS)

    Angelier, J.; Chu, H.-T.; Lee, J.-C.

    1997-06-01

    Repeated measurements of active deformation were carried out at three sites along the active Chihshang Fault, a segment of the Longitudinal Valley Fault zone of eastern Taiwan (the present-day plate boundary between the Philippine Sea Plate and Eurasia). Reliable annual records of displacement along an active fault, were obtained based on detailed surveys of faulted concrete structures. Along the active Chihshang Fault striking N18°E, we determined average motion vectors trending N37°W with an average shortening of 2.2 cm/yr. Thus, the transverse component of motion related to westward thrusting is 1.8 cm/yr, whereas the left-lateral strike-slip component of motion is 1.3 cm/yr. The fault dips 39-45° to the east, so that the vertical displacement is 1.5-3 cm/yr and the actual oblique offset of the fault increases at a rate of 2.7-3.7 cm/yr. This is in good agreement with the results of regional geodetic and tectonic analyses in Taiwan, and consistent with the N54°W trend of convergence between the northernmost Luzon Arc and South China revealed by GPS studies. Our study provides an example of extreme shear concentration in an oblique collision zone. At Chihshang, the whole horizontal shortening of the Longitudinal Valley Fault, 2.2 cm/yr on average, occurs across a single, narrow fault zone, so that the whole reverse slip (about 2.7-3.7 cm/yr depending on fault dip) was entirely recorded by walls 20-200 m long where faults are tightly localized. This active faulting accounts for more than one fourth (27%) of the total shortening between the Luzon Arc and South China recorded through GPS analyses. Further surveys should indicate whether the decreasing shortening velocity across the fault is significant (revealing increasing earthquake risk due to stress accumulation) or not (revealing continuing fault creep and 'weak' behaviour of the Chihshang Fault).

  3. Moment-tensor inversion for offshore earthquakes east of Taiwan and their implications to regional collision

    NASA Astrophysics Data System (ADS)

    Kao, Honn; Jian, Pei-Ru; Ma, Kuo-Fong; Huang, Bor-Shouh; Liu, Chun-Chi

    Reliable determination of source parameters for offshore earthquakes east of Taiwan with mb<5.5 was a difficult task because of the poor azimuthal coverage by local network and the lack of signals at teleseismic distances. We take advantage of the recently established “Broadband Array in Taiwan for Seismology” (BATS) to invert seismic moment tensors for 7 such events occurred in 1996. To cope with different patterns of background noise and unknown structural details, we utilize variable frequency bands in the inversion and adapt a two-step procedure to select best velocity models for individual epicenter-station paths. Our results are consistent with the overall patterns of regional collision and indicate that the resulting compressive stress has caused significant intraplate deformation within the Philippine Sea plate. Simulation of the region's geological evolution and orogenic processes should take this factor into account and allow the Philippine Sea plate to deform internally.

  4. Crustal gravitational potential energy change at the convergent plate boundary near Taiwan

    NASA Astrophysics Data System (ADS)

    Lo, C.; Hsu, S.

    2003-12-01

    The Taiwan orogen has formed due to the convergence between the Philippine Sea plate and Eurasian plate. Numerous earthquakes are occurring along the active convergent plate boundary in eastern Taiwan. To the northeast, the Philippine Sea plates is subducting northwards beneath the Ryukyu Arc. To the south, the Eurasian plate is subducting eastwards beneath the Luzon Arc. The plate interaction has caused crustal deformation and produced earthquakes. The earthquakes have caused radial permanent displacement of the crust and have altered the crustal gravitational potential energy. Here we use the earthquake source mechanisms, determined by the Broadband Array in Taiwan for Seismology (BATs) from 1995 to 2003, to calculate the crustal gravitational potential energy (GPE) change and discuss their tectonic implication along the convergent plate boundary. In Ilan Plain, the westernmost Okinawa Trough, it shows a crustal GPE loss. It is related to the crustal subsidence because of the backarc extension of the Okinawa Trough. In contrast, due to the Philippine Sea plate subucting northwards beneath Eurasian Plate, the Ryukyu convergent boundary shows systematic crustal GPE gain. Near Taiwan, the crustal GPE change is gained, indicating the collisional convergence of the Luzon Arc. To the south of Taiwan, along the Luzon Arc the crustal GPE is also gain, representing the initial uplifting of the Taiwan mountain belt.

  5. Collision and subduction structure of the Izu-Bonin arc, central Japan: Recent studies from refraction/wide-angle reflection analysis and seismic tomography

    NASA Astrophysics Data System (ADS)

    Arai, R.; Iwasaki, T.; Sato, H.; Abe, S.; Hirata, N.

    2009-12-01

    Since the middle Miocene, the Izu-Bonin arc has been colliding from south with the Honshu arc in central Japan associated with subduction of the Philippine Sea plate. This process is responsible for forming a complex crustal structure called the Izu collision zone. Geological studies indicate the several geological blocks derived from the Izu-Bonin arc, such as the Misaka Mountains (MM), the Tanzawa Mountains (TM) and the Izu Peninsula (IP), were accreted onto the Honshu crust in the course of the collision, forming several tectonic boundaries in and around this collision zone (e.g. Amano, 1991). Recent seismic experiments succeeded in revealing the deep crustal structure in the eastern part of the Izu collision zone by reflection analysis (Sato et al., 2005) and refraction/wide-angle reflection analysis (Arai et al., 2009). Although these studies delineate the collision boundary between the Honshu crust and TM, and the upper surface of the subducting Philippine Sea plate, the southern part of the profile including the Kozu-Matsuda Fault (KMF, the tectonic boundary between TM and IP) is not well constrained due to the poor ray coverage. Moreover, clear images of tectonic boundaries are not obtained for the central or western part of the collision zone. In order to construct the structure model dominated by collision and subduction for the whole part of the collision zone, we carried out the following two analyses: (1) refraction tomography of active source data including another profile line in the western part of the collision zone (Sato et al., 2006), and (2) seismic tomography combining active and passive source data. In the analysis (1), we applied first arrival seismic tomography (Zelt and Barton, 1998) to the refraction data .We inverted over 39,000 travel times to construct a P wave velocity model for the 75-km-long transect, and a fine-scale structure with strong lateral heterogeneity was recovered. We conducted checkerboard resolution test to evaluate a

  6. The ribbon continent of northwestern South America

    NASA Astrophysics Data System (ADS)

    Altamira-Areyan, Armando

    The tectonic structure of the Plate Boundary Zone (PBZ) between the Caribbean Plate (CARIB) and the South American Plate (SOAM) is interpreted using models that require CARIB motion from the Pacific into the Atlantic. Those models can be subdivided into: (1) those in which the island arc rocks that are now in the CARIB-SOAM PBZ have collided with the northern South America margin, either obliquely or directly during the Cretaceous or during the Cenozoic, and (2) those in which the island arc rocks now in the CARIB-SOAM PBZ collided with the west coast of South America during the Cretaceous and were transferred to the northern margin by transform motion during the Cenozoic. Magnetic anomalies were first rotated in the Central and South Atlantic, holding Africa fixed to establish how much NOAM had converged on SOAM during the Cenozoic. WSW convergence was discovered to have been accommodated in the northern boundary of the CARIB. There is no evidence of convergence in the form of Cenozoic island arc igneous rocks on the north coast of South America. Those results are consistent only with models of Class (2) that call for transform movement of material that had collided with the west coast of South America along the CARIB-SOAM PBZ on the northern margin of South America. 40Ar/39Ar ages of island arc rocks from northern Venezuela were found to be older than ca 70 Ma, which is consistent with a requirement of models of Class (2) that those rocks are from an island arc which collided with the west coast of South America during Cretaceous times. Testing that conclusion using data from Ecuador, Colombia, Venezuela, the Netherlands Antilles, Trinidad and Tobago has led to the construction of a new ribbon continent model of the northwestern Cordillera of South America. Because the part of the ribbon continent on the north coast of South America has been experiencing substantial deformation in the Maracaibo block during the past 10 m.y., structures in that body have had to be

  7. Melanesian arc far-field response to collision of the Ontong Java Plateau: Geochronology and petrogenesis of the Simuku Igneous Complex, New Britain, Papua New Guinea

    NASA Astrophysics Data System (ADS)

    Holm, Robert J.; Spandler, Carl; Richards, Simon W.

    2013-09-01

    Understanding the evolution of the mid-Cenozoic Melanesian arc is critical for our knowledge of the regional tectonic development of the Australian-Pacific plate margin, yet there have been no recent studies to constrain the nature and timing of magmatic activity in this arc segment. In particular, there are currently no robust absolute age constraints at the plate margin related to either the initiation or cessation of subduction and arc magmatism. We present the first combined U-Pb zircon geochronology and geochemical investigation into the evolution of the Melanesian arc utilizing a comprehensive sample suite from the Simuku Igneous Complex of West New Britain, Papua New Guinea. Development of the embryonic island arc from at least 40 Ma and progressive arc growth was punctuated by distant collision of the Ontong Java Plateau and subduction cessation from 26 Ma. This change in subduction dynamics is represented in the Melanesian arc magmatic record by emplacement of the Simuku Porphyry Complex between 24 and 20 Ma. Petrological and geochemical affinities highlight genetic differences between 'normal' arc volcanics and adakite-like signatures of Cu-Mo mineralized porphyritic intrusives. The contemporaneous emplacement of both 'normal' arc volcanics and adakite-like porphyry intrusives may provide avenues for future research into the origin of diverse styles of arc volcanism. Not only is this one of few studies into the geology of the Melanesian arc, it is also among the first to address the distant tectono-magmatic effects of major arc/forearc collision events and subduction cessation on magmatic arcs, and also offers insight into the tectonic context of porphyry formation in island arc settings.

  8. Magmatic record of India-Asia collision

    PubMed Central

    Zhu, Di-Cheng; Wang, Qing; Zhao, Zhi-Dan; Chung, Sun-Lin; Cawood, Peter A.; Niu, Yaoling; Liu, Sheng-Ao; Wu, Fu-Yuan; Mo, Xuan-Xue

    2015-01-01

    New geochronological and geochemical data on magmatic activity from the India-Asia collision zone enables recognition of a distinct magmatic flare-up event that we ascribe to slab breakoff. This tie-point in the collisional record can be used to back-date to the time of initial impingement of the Indian continent with the Asian margin. Continental arc magmatism in southern Tibet during 80–40 Ma migrated from south to north and then back to south with significant mantle input at 70–43 Ma. A pronounced flare up in magmatic intensity (including ignimbrite and mafic rock) at ca. 52–51 Ma corresponds to a sudden decrease in the India-Asia convergence rate. Geological and geochemical data are consistent with mantle input controlled by slab rollback from ca. 70 Ma and slab breakoff at ca. 53 Ma. We propose that the slowdown of the Indian plate at ca. 51 Ma is largely the consequence of slab breakoff of the subducting Neo-Tethyan oceanic lithosphere, rather than the onset of the India-Asia collision as traditionally interpreted, implying that the initial India-Asia collision commenced earlier, likely at ca. 55 Ma. PMID:26395973

  9. Origins of Semisulcospira libertina (gastropoda: semisulcospiridae) in Taiwan.

    PubMed

    Chiu, Yuh-Wen; Bor, Hor; Kuo, Po-Hsun; Hsu, Kui-Ching; Tan, Mian-Shin; Wang, Wei-Kuang; Lin, Hung-Du

    2017-07-01

    The most accepted hypothesis has suggested that the fauna in Taiwan Island originated from South China, but some studies supported the Japan, Ryukyu Archipelago, and Taiwan Islands as a unique biogeographical district. This study examines whether the populations of freshwater snail Semisulcospira libertina in Taiwan are closer to those in Japan based on the mitochondrial cytochrome c oxidase subunit I (COI) gene sequences. Our study shows the populations in North Taiwan originated from Japan and the cyclic glacial caused the migrations among islands and continent repeatedly; the populations in South Taiwan might originate from South China or South Asia. Our results will not only affect the conclusions in phylogeography of freshwater species in Taiwan but also change the sampling plans in the future studies about evolutionary of freshwater species in East Asia.

  10. Finite-Frequency Seismic Imaging of Upper-Mantle Velocity Structures Beneath the South China Continent

    NASA Astrophysics Data System (ADS)

    Qu, P.; Chen, Y. J.; Yu, Y.

    2017-12-01

    South China Continent is major formed from the Paleo-South China plate. The continent has experienced complicated tectonic history after Neoproterozoic. Previous studies suggested some possible model for the collision between South China Continent and North China Continent. Body wave tomography and surface wave tomography are widely used to inverse upper mantle velocity structure. In our study, finite frequency tomography were carried on to get explanation more correctly. We gathered nearly 60000 pieces of teleseismic event records by 166 broad band seismic stations with Mw > 5.5. Here sensitive kernel of ak135 velocity structure was calculated, which is based on Born approximation, and then we applied multi-channel cross-correlation to pick arrival time difference under 3 frequency band. Combining with crust thickness correct from receiver function, we solve the inversion matrix by LSQR method, and get accurate upper mantle structure of P, S velocity. For more accurate results, we apply a method to calculate Vp/Vs ratio, to help to verify the velocity anomaly. The result in this research shows: 1. A strong velocity anomaly exists in the northern of South China Continent, in an area 31°N between 112°-118°E. The anomaly is about . We suggest that, this anomaly is related to the collision from North China Continent. It implies the collision underthrusted to southward. 2. A clearly slow velocity anomaly exists in the northern of Cathaysia block. This low velocity anomaly exist on the boundary of Yangtz block and Cathysian block, it is related to the left over of block collision in early phanerozoic. 3. We recognized some little velocity anomaly exit in the research area. Comparing these velocity anomaly with U-Pb zircon ages, we suggest complicated orogenesis in Phanerozoic is the cause of the formation of these little anomaly. The result in our study support the collision model, which shows the underthrust direction is southward, on the south of Qinling

  11. Seismotetonics of the Eastern Taiwan offshore area from OBS data

    NASA Astrophysics Data System (ADS)

    Chin, S.; Lin, J.

    2013-12-01

    Located at the arc-continental collision region between the Eurasian (EU) and Philippine Sea Plate (PSP), Taiwan is characterized by a complex tectonic environment, especially the eastern part of the island. Based on geodetic, geological and geophysical data, the tectonic structures in the eastern Taiwan have been well studied by several former works. However, the seismotectonic structures in the offshore area of eastern Taiwan are still poorly understood, because most seismic stations are inland and the earthquakes occur offshore cannot be located accurately. To understand the seismic activities in the offshore area of the eastern Taiwan, we deployed 8 OBSs (Ocean Bottom Seismometer) from Jul. 9th to Aug. 3rd, 2012 to record the seismic signal. The continuous waveform data recorded by the CWB (Central Weather Bureau) land stations were also used to increase the precision of the hypocenter determination. Seismic events were detected manually and the Antelope software and the global velocity model iasp91 (Kennett and Engdahl, 1991) were used for the initial localization. As a result, a total of 714 events were located in the previous 17-day data. Because of the complexity of the crustal structures around Taiwan, a 1-D seismic velocity model is not accurate sufficiently for a reliable hypocenter determination. For improving the precision of the location, we relocated the earthquakes with the HypoDD relocation method (Waldhauser and Ellsworth, 2000) which could minimize errors result from the velocity structure without the use of station corrections. Finally, 306 events were relocated successfully. Compared with the earthquakes determined by the Taiwanese seismic network (CWB and BATS- Broadband Array in Taiwan for Seismology), our preliminary result has a similar seismic pattern with these two catalogs but contains much more offshore earthquakes in the same time period. The relocated earthquakes show an east-dipping seismic zone in the southern part of eastern Taiwan

  12. Recent Aeromagnetic Anomaly views of the Antarctic continent

    NASA Astrophysics Data System (ADS)

    Ferraccioli, F.

    2012-04-01

    Antarctica is a keystone within the Gondwana and Rodinia supercontinents. However, despite intense geological research along the coastal fringes of Antarctica, the interior of the continent remains one of the most poorly understood regions on Earth. Aeromagnetic investigations are a useful tool to help disclose the structure and the evolution of continents from the Precambrian to the Cenozoic and Antarctica is no exception. Here I review a variety of aeromagnetic studies in East and West Antarctica performed since the completion of the first generation ADMAP -Antarctic Digital Magnetic Anomaly Project- in 2001. In western Dronning Maud, in East Antarctica, aeromagnetic data help delineate the extent of the Jurassic Jutulstraumen subglacial rift that is flanked by remnants of a Grenvillian-age (ca 1.1. Ga) igneous province and magmatic arc. Different magnetic signatures appear to characterize the Coats Land block but reconnaissance surveys are insufficient to fully delineate the extent and significance of the Coats Land block, a possible tectonic tracer of Laurentia within Rodinia (Loewy et al., 2011). Further in the interior of East Antarctica, a mosaic of distinct and hitherto largely unknown Precambrian provinces has recently been revealed by combining aeromagnetic and satellite magnetic data with models of crustal thickness constrained by gravity modeling and seismology (Ferraccioli et al., 2011, Nature). A major collisional suture may lie between the Archean Ruker Province and an inferred Proterozoic Gamburtsev Province but the age of final assembly of central East Antarctica remains uncertain and controversial. I favour a Grenville-age collisional event (linked to Rodinia assembly) or possibly older Paleoproteroic collision, followed by intraplate reactivation, as opposed to Neoproterozoic or Early Cambrian collision linked to East-West Gondwana assembly (Boger, 2011). New aerogeophysical surveys over Prince Elizabeth and Queen Mary Land could test this

  13. A model for the termination of the Ryukyu subduction zone against Taiwan: A junction of collision, subduction/separation, and subduction boundaries

    USGS Publications Warehouse

    Wu, F.T.; Liang, W.-T.; Lee, J.-C.; Benz, H.; Villasenor, A.

    2009-01-01

    The NW moving Philippine Sea plate (PSP) collides with the Eurasian plate (EUP) in the vicinity of Taiwan, and at the same time, it subducts toward the north along SW Ryukyu. The Ryukyu subduction zone terminates against eastern Taiwan. While the Ryukyu Trench is a linear bathym??trie low about 100 km east of Taiwan, closer to Taiwan, it cannot be clearly identified bathymetrically owing to the deformation related to the collision, making the location of the intersection of the Ryukyu with Taiwan difficult to decipher. We propose a model for this complex of boundaries on the basis of seismicity and 3-D velocity structures. In this model the intersection is placed at the latitude of about 23.7??N, placing the northern part of the Coastal Range on EUP. As PSP gets deeper along the subduction zone it collides with EUP on the Taiwan side only where they are in direct contact. Thus, the Eurasian plate on the Taiwan side is being pushed and compressed by the NW moving Philippine Sea plate, at increasing depth toward the north. Offshore of northeastern Taiwan the wedge-shaped EUP on top of the Ryukyu subducting plate is connected to the EUP on the Ryukyu side and coupled to the NW moving PSP by friction at the plate interface. The two sides of the EUP above the western end of the subduction zone are not subjected to the same forces, and a difference in motions can be expected. The deformation of Taiwan as revealed by continuous GPS measurements, geodetic movement along the east coast of Taiwan, and the formation of the Hoping Basin can be understood in terms of the proposed model. Copyright 2009 by the American Geophysical Union.

  14. Assembly of the Lhasa and Qiangtang terranes in central Tibet by divergent double subduction

    NASA Astrophysics Data System (ADS)

    Zhu, Di-Cheng; Li, Shi-Min; Cawood, Peter A.; Wang, Qing; Zhao, Zhi-Dan; Liu, Sheng-Ao; Wang, Li-Quan

    2016-02-01

    Integration of lithostratigraphic, magmatic, and metamorphic data from the Lhasa-Qiangtang collision zone in central Tibet (including the Bangong suture zone and adjacent regions of the Lhasa and Qiangtang terranes) indicates assembly through divergent double sided subduction. This collision zone is characterized by the absence of Early Cretaceous high-grade metamorphic rocks and the presence of extensive magmatism with enhanced mantle contributions at ca. 120-110 Ma. Two Jurassic-Cretaceous magmatic arcs are identified from the Caima-Duobuza-Rongma-Kangqiong-Amdo magmatic belt in the western Qiangtang Terrane and from the Along Tso-Yanhu-Daguo-Baingoin-Daru Tso magmatic belt in the northern Lhasa Terrane. These two magmatic arcs reflect northward and southward subduction of the Bangong Ocean lithosphere, respectively. Available multidisciplinary data reconcile that the Bangong Ocean may have closed during the Late Jurassic-Early Cretaceous (most likely ca. 140-130 Ma) through arc-arc "soft" collision rather than continent-continent "hard" collision. Subduction zone retreat associated with convergence beneath the Lhasa Terrane may have driven its rifting and separation from the northern margin of Gondwana leading to its accretion within Asia.

  15. Magmatic record of Late Devonian arc-continent collision in the northern Qiangtang, Tibet: Implications for the early evolution of East Paleo-Tethys Ocean

    NASA Astrophysics Data System (ADS)

    Dan, Wei; Wang, Qiang; Zhang, Xiu-Zheng; Zhang, Chunfu; Tang, Gong-Jian; Wang, Jun; Ou, Quan; Hao, Lu-Lu; Qi, Yue

    2018-05-01

    Recognizing the early-developed intra-oceanic arc is important in revealing the early evolution of East Paleo-Tethys Ocean. In this study, new SIMS zircon U-Pb dating, O-Hf isotopes, and whole-rock geochemical data are reported for the newly-discovered Late Devonian-Early Carboniferous arc in Qiangtang, central Tibet. New dating results reveal that the eastern Riwanchaka volcanic rocks were formed at 370-365 Ma and were intruded by the 360 Ma Gangma Co alkali feldspar granites. The volcanic rocks consist of basalts, andesites, dacites, and rhyodacites, whose geochemistry is similar to that typical of subduction-related volcanism. The basalts and andesites were generated by partial melting of the fluid and sediment-melt metasomatized mantle, respectively. The rhyodacites and dacites were probably derived from the fractional crystallization of andesites and from partial melting of the juvenile underplated mafic rocks, respectively. The Gangma Co alkali feldspar granites are A-type granites, and were possibly derived by partial melting of juvenile underplated mafic rocks in a post-collisional setting. The 370-365 Ma volcanic arc was characterized by basalts with oceanic arc-like Ce/Yb ratios and by rhyodacites with mantle-like or slightly higher zircon δ18O values, and it was associated with the contemporary ophiolites. Thus, we propose that it is the earliest intra-oceanic arc in the East Paleo-Tethys Ocean, and was accreted to the Northern Qiangtang Terrane during 365-360 Ma.

  16. Eclogite-facies metamorphism in impure marble from north Qaidam orogenic belt: Geodynamic implications for early Paleozoic continental-arc collision

    NASA Astrophysics Data System (ADS)

    Chen, Xin; Xu, Rongke; Schertl, Hans-Peter; Zheng, Youye

    2018-06-01

    In the North Qaidam ultrahigh-pressure (UHP) metamorphic belt, impure marble and interbedded eclogite represent a particular sedimentary provenance and tectonic setting, which have important implications for a controversial problem - the dynamic evolution of early Paleozoic subduction-collision complexes. In this contribution, detailed field work, mineral chemistry, and whole-rock geochemistry are presented for impure marble to provide the first direct evidence for the recycling of carbonate sediments under ultrahigh-pressures during subduction and collision in the Yuka terrane, in the North Qaidam UHP metamorphic belt. According to conventional geothermobarometry, pre-peak subduction to 0.8-1.3 GPa/485-569 °C was followed by peak UHP metamorphism at 2.5-3.3 GPa/567-754 °C and cooling to amphibolite facies conditions at 0.6-0.7 GPa/571-589 °C. U-Pb dating of zircons from impure marble reveals a large group with ages ranging from 441 to 458 Ma (peak at 450 Ma), a smaller group ranging from 770 to 1000 Ma (peak at 780 Ma), and minor >1.8 Ga zircon aged ca. 430 Ma UHP metamorphism. The youngest detrital zircons suggest a maximum depositional age of ca. 442 Ma and a burial rate of ca. 1.0-1.1 cm/yr when combined with P-T conditions and UHP metamorphic age. The REE and trace element patterns of impure marble with positive Sr and U anomalies, negative high field strength elements (Nb, Ta, Zr, Hf, and Ti), and Ce anomalies imply that the marble had a marine limestone precursor. Impure marble intercalated with micaschist and eclogite was similar to limestone and siltstone protoliths deposited in continental fore-arc or arc setting with basic volcanic activity. Therefore, the Yuka terrane most likely evolved in a continental island arc setting during the Paleozoic. These data suggest that metasediments were derived from a mixture of Proterozoic continental crust and juvenile early Paleozoic oceanic and/or island arc crust. In addition, their protoliths were likely

  17. Rethinking Recycling in Arcs

    NASA Astrophysics Data System (ADS)

    Kelemen, P.; Behn, M. D.; Jagoutz, O.

    2012-12-01

    Hacker et al EPSL 2011 and Behn et al Nature Geosci 2011 investigated pathways for return of buoyant, subducted material to arc crust. These include (1) diapirs rising into the hot mantle wedge, with extensive melts adding a component to arc magmas, (2) flow of material back up a relatively cold "subduction channel", adding solids to the lower crust and small-degree partial melts to the upper crust, (3) flow from the forearc along the base of arc crust, and (4) imbrication of forearc material into arc crust. These processes add felsic, incompatible-element-rich components to arc crust. The flux of incompatible elements such as Th in arc lavas, thought to be mainly recycled from subducted sediments, is > sediment subduction flux. There are large uncertainties: arc crustal growth rates are imprecise; young, primitive arc lavas may not be representative of magmatic flux into arc crust; sediment subduction flux may have varied. Nevertheless, this result is found for all arcs examined, using recently published growth rates. Perhaps arc growth rates that include subduction erosion are systematically overestimated. Instead or in addition, maybe significant Th comes from material other than sediments. Here, we consider the implications of pathways 1-4 for arc growth rates and incompatible element enrichment, in the context of subduction erosion and arc-arc collision. Subducting arc lithologies can become separated, with only felsic components returned to arc crust. Buoyant lithologies are mobile in viscous instabilities at > 700-800°C. Whereas thin layers such as sediments may become mobile all at once, instabilities may periodically strip the hottest parts from the top of thick buoyant layers, replacing them with hot mantle. In arc-arc collision, the top of a subducting plate starts at about 0°C on the seafloor, so heating is slow. In subduction erosion, forearc material in the subducting package can be > 200°C before erosion so buoyant lithologies reach 700-800

  18. [The peculiar features of the sidewise collision involving a pedestrian and an automobile moving in the reverse gear along an arc of a circle].

    PubMed

    Leonov, S V; Pinchuk, P V; Shakir'janova, Ju P

    This article was designed to report the results of the analysis of the consequences of a real case of the sidewise collision and run-over involving a pedestrian and an automobile moving in the reverse gear along an arc of a circle. Special attention was given to the mechanism behind the collision, its peculiar features, and characteristic damages inflicted to the pedestrian's body and clothes.

  19. Collision propagation in Papua New Guinea and Solomon Sea

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Silver, E.A.; Abbott, L.; Kirchoff-Stein, K.

    The collision of the Finisterre-New Britain terrane with the Australian continent is propagating eastward at a rate of approximately 125 km/m.y., based on plate motions and the collisional geometry, as well as on the geochemistry of the arc volcanics. A sequence of sedimentary facies is developed from east to west in the modern environment (pelagic sediments, turbidites, marine molasse, and fluvial molasse), and this sequence is accreted from north to south at the front of the terrane collision in the Markham valley. Based on the modern distribution, the authors suggest that the age of the initial marine molasse will predatemore » the passage of the collision point, and that of the fluvial molasse will postdate its passage. Intense erosion in the Markham canyon, located along the suture between the collision point and the coast, appears to be responsible for stripping most of the accreted marine molasse and redepositing it in a basin just east of the collision point. Convergence along the suture zone deceases westward. At Lae, very young deformation is seen, but 80 km to the west undeformed terrace deposits cover the deformation front. Uplift appears active within the range, aided by out-of-sequence thrusting, but still farther west the rocks lack signs of young tectonism. In the region just west of Lae, the main locus of slip between the Australian and south Bismarck plates must transfer southward to the front of the Papuan fold-and-thrust belt.« less

  20. The record of India-Asia collision preserved in Tethyan ocean basin sediments.

    NASA Astrophysics Data System (ADS)

    Najman, Yani; Jenks, Dan; Godin, Laurent; Boudagher-Fadel, Marcelle; Bown, Paul; Horstwood, Matt; Garzanti, Eduardo; Bracialli, Laura; Millar, Ian

    2015-04-01

    The timing of India-Asia collision is critical to the understanding of crustal deformation processes, since, for example, it impacts on calculations regarding the amount of convergence that needs to be accommodated by various mechanisms. In this research we use sediments originally deposited in the Tethyan ocean basin and now preserved in the Himalayan orogeny to constrain the timing of collision. In the NW Himalaya, a number of workers have proposed a ca 55-50 Ma age for collision along the Indus suture zone which separates India from the Kohistan-Ladakh Intraoceanic Island arc (KLA) to the north. This is based on a number of factors including the age of youngest marine sediments in the Indus suture (e.g. Green et al. 2008), age of eclogites indicative of onset of Indian continental subduction (e.g. de Sigoyer et al. 2000), and first evidence of detritus from north of the suture zone deposited on the Indian plate (e.g. Clift et al. 2002). Such evidence can be interpreted as documenting the age of India-Asia collision if one takes the KLA to have collided with the Asian plate prior to its collision with India (e.g. Petterson 2010 and refs therein). However, an increasing number of workers propose that the KLA collided with Asia subsequent to its earlier collision with India, dated variously at 85 Ma (Chatterjee et al. 2013), 61 Ma (Khan et al. 2009) and 50 Ma (Bouilhol et al. 2013). This, plus the questioning of earlier provenance work (Clift et al. 2002) regarding the validity of their data for constraining timing of earliest arrival of material north of the suture deposited on the Indian plate (Henderson et al. 2011) suggests that the time is right for a reappraisal of this topic. We use a provenance-based approach here, using combined U-Pb and Hf on detrital zircons from Tethyan ocean basin sediments, along with petrography and biostratigraphy, to identify first arrival of material from north of the Indian plate to arrive on the Indian continent, to constrain

  1. Active Structures as Deduced from Geomorphic Features: A case in Hsinchu Area, northwestern Taiwan

    NASA Astrophysics Data System (ADS)

    Chen, Y.; Shyu, J.; Ota, Y.; Chen, W.; Hu, J.; Tsai, B.; Wang, Y.

    2002-12-01

    Hsinchu area is located in the northwestern Taiwan, the fold-and thrust belt created by arc-continent collision between Eurasian and Philippine. Since the collision event is still ongoing, the island is tectonically active and full of active faults. According to the historical records, some of the faults are seismically acting. In Hsinchuarea two active faults, the Hsinchu and Hsincheng, have been previously mapped. To evaluate the recent activities, we studied the related geomorphic features by using newly developed Digital Elevation Model (DEM), the aerial photos and field investigation. Geologically, both of the faults are coupled with a hanging wall anticline. The anticlines are recently active due to the deformation of the geomorphic surfaces. The Hsinchu fault system shows complicate corresponding scarps, distributed sub-parallel to the fault trace previously suggested by projection of subsurface geology. This is probably caused by its strike-slip component tearing the surrounding area along the main trace. The scarps associated with the Hsincheng fault system are rather simple and unique. It offsets a flight of terraces all the way down to recent flood plain, indicating its long lasting activity. One to two kilometers to east of main trace a back-thrust is found, showing coupled vertical surface offsets with the main fault. The striking discovery in this study is that the surface deformation is only distributed in the southern bank of Touchien river, also suddenly decreasing when crossing another tear fault system, which is originated from Hsincheng fault in the west and extending southeastward parallel to the Touchien river. The strike-slip fault system mentioned above not only bisects the Hsinchu fault, but also divides the Hsincheng fault into segments. The supporting evidence found in this study includes pressure ridges and depressions. As a whole, the study area is tectonically dominated by three active fault systems and two actively growing anticlines

  2. New Radiolarian Age Constraints on the Emplacement History of the Manipur Ophiolitic Complex, India: the Timing of 'soft Collision'

    NASA Astrophysics Data System (ADS)

    Kachovich, S.; Aitchison, J. C.; Lokho, K.; Stojanovic, D.

    2016-12-01

    The Manipur Ophiolite complex in the Indo-Burman ranges is characterised by a north-south trending belt of ophiolitic and related oceanic volcanic and sedimentary rocks. The ophiolite is considered to have formed in Jurassic time as part of an intra-oceanic subduction zone. It was subsequently emplaced onto the continental margin of India. Although the ophiolite is extensively disrupted, well-exposed outcrops exist in new road cuttings. We present new results from investigations of associated oceanic pelagic sequences amongst which radiolarian microfossils help to constrain the timing for the emplacement event. Pelagic sediments assigned to the Disang Formation that crop out near Khamasom village, west of Ukhrul city are characterised by extensive fault-bounded packages of reddish-coloured, radiolarian-bearing mudstones. They yield abundant well-preserved, late Palaeocene to early Eocene radiolarians. As the ophiolitic rocks are thrust over these radiolarian-bearing sediments, they provide a precise biostratigraphic maximum age with which to constrain any ophiolite emplacement event. Elsewhere along the length of the Indus-Yarlung Tsangpo suture zone from NW India (Spongtang, Ladakh) in the west as well as at Zhongba, Sangdanlin and Gyantse across Tibet, correlative radiolarian faunas provide similar age constraints suggesting that this event was broadly coeval. Collision of an intra-oceanic island arc system with northern margin of the Indian continent over such an extensive strike length must be of regional significance. Moreover, given that this was an intra-Tethyan system it's collision (the `soft-collision' postulated by Curray et al. 1982) must pre-date later (hard) continent-continent collision. Reference: Curray, J.R., Emmel, F.J., Moore, D.G., Raitt, R.W., 1982. Structure, tectonics, and geological history of the northeastern Indian Ocean. In; Nairn, A.E.M. The Ocean Basins and Margins vol. 6: 399-450, Plenum Press.

  3. GPS and seismological constraints on active tectonics and arc-continent collision in Papua New Guinea: Implications for mechanics of microplate rotations in a plate boundary zone

    NASA Astrophysics Data System (ADS)

    Wallace, Laura M.; Stevens, Colleen; Silver, Eli; McCaffrey, Rob; Loratung, Wesley; Hasiata, Suvenia; Stanaway, Richard; Curley, Robert; Rosa, Robert; Taugaloidi, Jones

    2004-05-01

    The island of New Guinea is located within the deforming zone between the Pacific and Australian plates that converge obliquely at ˜110 mm/yr. New Guinea has been fragmented into a complex array of microplates, some of which rotate rapidly about nearby vertical axes. We present velocities from a network of 38 Global Positioning System (GPS) sites spanning much of the nation of Papua New Guinea (PNG). The GPS-derived velocities are used to explain the kinematics of major tectonic blocks in the region and the nature of strain accumulation on major faults in PNG. We simultaneously invert GPS velocities, earthquake slip vectors on faults, and transform orientations in the Woodlark Basin for the poles of rotation of the tectonic blocks and the degree of elastic strain accumulation on faults in the region. The data are best explained by six distinct tectonic blocks: the Australian, Pacific, South Bismarck, North Bismarck, and Woodlark plates and a previously unrecognized New Guinea Highlands Block. Significant portions of the Ramu-Markham Fault appear to be locked, which has implications for seismic hazard determination in the Markham Valley region. We also propose that rapid clockwise rotation of the South Bismarck plate is controlled by edge forces initiated by the collision between the Finisterre arc and the New Guinea Highlands.

  4. Crustal dynamics studies in China

    NASA Technical Reports Server (NTRS)

    Wu, F. T.

    1985-01-01

    Geodynamics of Mainland China and Taiwan are discussed. The following research was performed: (1) the tectonics along the Tanlu fault in eastern China; (2) tectonics in the Taiwan Strait behind the collision zone in Taiwan; and (3) analysis of faulting in the vicinity of the Altyn Tagn fault. It is found that the existence of the fault is traced back to at least Jurassic with the deposition of conglomerate sandstones in the troungh along the present Tanlu fault branches in the Shantung Province. Taiwan is the product of collision between the Phillipine plate and the Asian plate and Taiwan came into being because of a former island arc.

  5. Deformation and seismicity of Taiwan.

    PubMed

    Vita-Finzi, C

    2000-10-10

    14C-dated Holocene coastal uplift, conventional and satellite geodetic measurements, and coseismic and aseismic fault slip reveal the pattern of distributed deformation at Taiwan resulting from convergence between the Philippine Sea plate and Eurasia; as in other subduction orogenic settings, the locus of strain release and accumulation is strongly influenced by changes in fault geometry across strike. Uplift evidence from the islands of Lutao and Lanhsu is consistent with progressive oblique collision between the Luzon arc and the Chinese continental margin. In the Coastal Range, geodetic and seismic records show that shortening is taken up serially by discontinuous slip on imbricate faults. The geodetic data point to net extension across the Central Range, but deformed Holocene shorelines in the Hengchun Peninsula at its southern extremity suggest that the extension is a superficial effect partly caused by blind reverse faulting. The fastest shortening rates indicated by geodesy are recorded on the Longitudinal Valley fault and across the Chukou fault within the fold-and-thrust belt. In the former, the strain is dissipated mainly as aseismic reverse and strike-slip displacement. In contrast, the fold-and-thrust belt has witnessed five earthquakes with magnitudes of 6.5 or above in the 20th century, including the 1999.9.21 Chi-Chi earthquake (magnitude approximately 7.6) on a branch of the Chukou fault. The neotectonic and geodetic data for Taiwan as a whole suggest that the fold-and-thrust belt will continue to host the majority of great earthquakes on the island.

  6. A 'Propagating' Active Across-Arc Normal Fault Shows Rupture Process of the Basement: the Case of the Southwestern Ryukyu Arc

    NASA Astrophysics Data System (ADS)

    Matsumoto, T.; Shinjo, R.; Nakamura, M.; Kubo, A.; Doi, A.; Tamanaha, S.

    2011-12-01

    Ryukyu Arc is located on the southwestern extension of Japanese Island-arc towards the east of Taiwan Island along the margin of the Asian continent off China. The island-arc forms an arcuate trench-arc-backarc system. A NW-ward subduction of the Philippine Sea Plate (PSP)at a rate of 6-8 cm/y relative to the Eurasian Plate (EP) causes frequent earthquakes. The PSP is subducting almost normally in the north-central area and more obliquely around the southwestern area. Behind the arc-trench system, the Okinawa Trough (OT) was formed by back-arc rifting, where active hydrothermal vent systems have been discovered. Several across-arc submarine faults are located in the central and southern Ryukyu Arc. The East Ishigaki Fault (EIF) is one of the across-arc normal faults located in the southwestern Ryukyu Arc, ranging by 44km and extending from SE to NW. This fault was surveyed by SEABAT8160 multibeam echo sounder and by ROV Hyper-Dolphin in 2005 and 2008. The result shows that the main fault consists of five fault segments. A branched segment from the main fault was also observed. The southernmost segment is most mature (oldest but still active) and the northernmost one is most nascent. This suggests the north-westward propagation of the fault rupture corresponding to the rifting of the southwestern OT and the southward retreat of the arc-trench system. Considering that the fault is segmented and in some part branched, propagation might take place episodically rather than continuously from SE to NW. The ROV survey also revealed the rupture process of the limestone basement along this fault from the nascent stage to the mature stage. Most of the rock samples collected from the basement outcrop were limestone blocks (or calcareous sedimentary rocks). Limestone basement was observed to the west on the hanging wall far away from the main fault scarp. Then fine-grained sand with ripple marks was observed towards the main scarp. Limestone basement was observed on the main

  7. The chronology of the India-Asia collision

    NASA Astrophysics Data System (ADS)

    Garzanti, Eduardo; Hu, Xiumian

    2016-04-01

    Markedly diverging interpretations and incompatible scenarios have been proposed for the early stages of the Himalayan Orogeny. One view is that the northern Indian passive margin may have been involved in ophiolite obduction, arc-continent, or continent-continent collision as early as the Late Cretaceous. A different view is that India may have not come into contact with Asia until as late as the Oligo-Miocene. Ages assigned to the India-Asia collision have thus ranged rather freely from as old as 70 Ma to as young as 25-20 Ma, allowing researchers to select in remarkable liberty the age that fitted best with their lines of reasoning. In recent years, however, a growing body of stratigraphic evidence has constrained the chronology of collision with increasing accuracy and precision. Provenance analysis has ruled out early collision or ophiolite-obduction hypotheses, indicating that renewed terrigenous supply in the Maastrichtian to Danian (72-62 Ma) was derived from India in the south - rejuvenated by magmatic upwelling during the Deccan event - rather than from Asia or from an obducting ophiolite in the north (Garzanti and Hu, 2015). Integrated biostratigraphy and detrital-zircon chronostratigraphy has demonstrated that the first continent-continent contact and consequent disappearance of Neotethyan oceanic lithosphere at one point in south Tibet took place in the Selandian (59 ± 1 Ma; DeCelles et al., 2014; Wu et al., 2014; Hu et al., 2015). A major disconformity documenting tectonic uplift of carbonate platforms all along the Tethys Himalaya from the Gamba and Tingri areas of south Tibet to the Zanskar Range of the NW Himalaya, allowed dating the arrival of the orogenic wave in the inner part of the northern Indian passive margin around the Paleocene/Eocene boundary (ca. 56 Ma; Garzanti et al., 1987; Li et al., 2015). Shallow-marine seaways linked with Neotethys persisted in the Himalaya until the mid-Ypresian (ca. 50 Ma), when they were finally filled by

  8. Sculpting the Philippine archipelago since the Cretaceous through rifting, oceanic spreading, subduction, obduction, collision and strike-slip faulting: Contribution to IGMA5000

    NASA Astrophysics Data System (ADS)

    Aurelio, Mario A.; Peña, Rolando E.; Taguibao, Kristine Joy L.

    2013-08-01

    The Philippine archipelago resulted from a complex series of geologic events that involved continental rifting, oceanic spreading, subduction, ophiolite obduction, arc-continent collision, intra-arc basin formation and strike-slip faulting. It can be divided into two tectono-stratigraphic blocks, namely; the Palawan-Mindoro Continental Block (PCB) and the Philippine Mobile Belt (PMB). The PCB was originally a part of the Asian mainland that was rifted away during the Mesozoic and drifted in the course of the opening of the South China Sea (SCS) during Late Paleogene. On the other hand, the PMB developed mainly from island arcs and ophiolite terranes that started to form during the Cretaceous. At present, the PMB collides with the PCB in the Visayas in the central-western Philippines. This paper discusses recent updates on Philippine geology and tectonics as contribution to the establishment of the International Geologic Map of Asia at 1:5 M scale (IGMA5000).

  9. Structural profile reconstructions and thermal metamorphic evolution in the slate belt of southern Hsuehshan Range in the active Taiwan mountain belt

    NASA Astrophysics Data System (ADS)

    Wu, Yu; Chen, Chih-Tung; Lee, Jian-Cheng; Shyu, J. Bruce H.

    2017-04-01

    The fate of passive continental margin in collisional orogens is crucial in understanding tectonic evolution of mountain belts. The active arc-continent collision of Taiwan is considered as a model case in studying mountain building processes, and largely consists of deformed margin basement and cover series. Among the whole orogeny belt, the slate belt of the Hsuehshan Range (HR) is a prominent large-scale pop-up structural on the prowedge part of the orogen, and is composed of metamorphosed Eocene to Miocene sediments which experienced only the Neogene Taiwan orogeny after diagenesis in margin graben. Characterizing the metamorphic history of the HR is essential for reconstructing its geological evolution during the mountain building processes. However, previous studies were mostly focused on northern and central HR, structural investigation coupled with metamorphic documentation in the southern part of HR, which is the most active part of the orogeny belt, is therefore targeted in this work. Since carbonaceous material is common in pelitic protolith of HR slates, the Raman spectrum of carbonaceous material (RSCM) measuring the rock peak temperature is chosen for quantitative thermal metamorphic documentation. In this study, we reconstruct a geological structural profile in western central Taiwan across the prowedge part of the mountain belt containing the southern HR by combining the surface geological data, well log records and published seismic reflection profiles. Although most of the existing data are concentrated in the fold-and-thrust belt, they are now reinforced by new field structural measurements and RSCM samples in the southern HR. In total 27 RSCM samples were collected along 2 transects perpendicular to the average strike with a dense interval about 2 km. The results allow us to map peak temperature distribution across southern HR, and provide new constraints for structural profile reconstruction and reappraisal of the structural evolution of the HR

  10. Regulating continent growth and composition by chemical weathering

    PubMed Central

    Lee, Cin-Ty Aeolus; Morton, Douglas M.; Little, Mark G.; Kistler, Ronald; Horodyskyj, Ulyana N.; Leeman, William P.; Agranier, Arnaud

    2008-01-01

    Continents ride high above the ocean floor because they are underlain by thick, low-density, Si-rich, and Mg-poor crust. However, the parental magmas of continents were basaltic, which means they must have lost Mg relative to Si during their maturation into continents. Igneous differentiation followed by lower crustal delamination and chemical weathering followed by subduction recycling are possible solutions, but the relative magnitudes of each process have never been quantitatively constrained because of the lack of appropriate data. Here, we show that the relative contributions of these processes can be obtained by simultaneous examination of Mg and Li (an analog for Mg) on the regional and global scales in arcs, delaminated lower crust, and river waters. At least 20% of Mg is lost from continents by weathering, which translates into >20% of continental mass lost by weathering (40% by delamination). Chemical weathering leaves behind a more Si-rich and Mg-poor crust, which is less dense and hence decreases the probability of crustal recycling by subduction. Net continental growth is thus modulated by chemical weathering and likely influenced by secular changes in weathering mechanisms. PMID:18362343

  11. Regulating continent growth and composition by chemical weathering

    USGS Publications Warehouse

    Lee, C.-T.A.; Morton, D.M.; Little, M.G.; Kistler, R.; Horodyskyj, U.N.; Leeman, W.P.; Agranier, A.

    2008-01-01

    Continents ride high above the ocean floor because they are underlain by thick, low-density, Si-rich, and Mg-poor crust. However, the parental magmas of continents were basaltic, which means they must have lost Mg relative to Si during their maturation into continents. Igneous differentiation followed by lower crustal delamination and chemical weathering followed by subduction recycling are possible solutions, but the relative magnitudes of each process have never been quantitatively constrained because of the lack of appropriate data. Here, we show that the relative contributions of these processes can be obtained by simultaneous examination of Mg and Li (an analog for Mg) on the regional and global scales in arcs, delaminated lower crust, and river waters. At least 20% of Mg is lost from continents by weathering, which translates into >20% of continental mass lost by weathering (40% by delamination). Chemical weathering leaves behind a more Si-rich and Mg-poor crust, which is less dense and hence decreases the probability of crustal recycling by subduction. Net continental growth is thus modulated by chemical weathering and likely influenced by secular changes in weathering mechanisms. ?? 2008 by The National Academy of Sciences of the USA.

  12. Orogeny can be very short

    PubMed Central

    Dewey, John F.

    2005-01-01

    In contrast to continent/continent collision, arc–continent collision generates very short-lived orogeny because the buoyancy-driven impedance of the subduction of continental lithosphere, accompanied by arc/suprasubduction-zone ophiolite obduction, is relieved by subduction polarity reversal (flip). This tectonic principle is illustrated by the early Ordovician Grampian Orogeny in the British and Irish Caledonides, in which a wealth of detailed sedimentologic, heavy mineral, and geochronologic data pin the Orogeny to a very short Arenig/Llanvirn event. The Orogeny, from the initial subduction of continental margin sediments to the end of postflip shortening, lasted ≈18 million years (my). The collisional shortening, prograde-metamorphic phase of the Orogeny lasted 8 my, extensional collapse and exhumation of midcrustal rocks lasted 1.5 my, and postflip shortening lasted 4.5 my. Strain rates were a typical plate-boundary-zone 10-15. Metamorphism, to the second sillimanite isograd, with extensive partial melting, occurred within a few my after initial collision, indicating that conductive models for metamorphic heat transfer in Barrovian terrains are incorrect and must be replaced by advective models in which large volumes of mafic/ultramafic magma are emplaced, syn-tectonically, below and into evolving nappe stacks. Arc/continent collision generates fast and very short orogeny, regional metamorphism, and exhumation. PMID:16126898

  13. Gravity data inversion for 3D topography of the Moho discontinuity by separation of sources in Taiwan region

    NASA Astrophysics Data System (ADS)

    Lo, Y. T.; Yen, H. Y.

    2012-04-01

    Taiwan is located at a complex juncture between the Eurasian and Philippine Sea plates. The mountains in Taiwan are very young, formed as a result of the collision between an island arc system and the Asian continental margin. To separate sources of gravity field in depth, a method is suggested, based on upward and downward continuation. Both new methods are applied to isolate the contribution of the Moho interface to the total field and to find its 3D topography. At the first stage, we separate near surface and deeper sources. At the next stage, we isolate the effect of very deep sources. After subtracting this field from the total effect of deeper sources, we obtain the contribution of the Moho interface. We make inversion separately for the area. In this study, we use the detail gravity data around this area to investigate the reliable subsurface density structure. First, we combine with land and marine gravity data to obtain gravity anomaly. Second, considering the geology, tomography and other constrains, we simulate the 3D density structure. The main goal of our study is to understand the Moho topography and sediment-crustal boundary in Taiwan area. We expect that our result can consistent with previous studies.

  14. The Effects of Aseismic Ridge Collision on Upper Plate Deformation: Cocos Ridge Collision and Deformation of the Western Caribbean

    NASA Astrophysics Data System (ADS)

    La Femina, P. C.; Govers, R. M. A.; Ruiz, G.; Geirsson, H.; Camacho, E.; Mora-Paez, H.

    2015-12-01

    The collision of the Panamanian isthmus with northwestern South America is thought to have initiated as early as Oligocene - Miocene time (23-25 Ma) based on geologic and geophysical data and paleogeographic reconstructions. This collision was driven by eastward-directed subduction beneath northwestern South America. Cocos - Caribbean convergence along the Middle America Trench, and Nazca - Caribbean oblique convergence along the South Panama Deformed Belt have resulted in complex deformation of the southwestern Caribbean since Miocene - Pliocene time. Subduction and collision of the aseismic Cocos Ridge is thought to have initiated <3.5 Ma and has been linked to: 1) late Miocene-Pliocene cessation of volcanism and uplift of the Cordillera de Talamanca, Costa Rica; 2) Quaternary migration of the volcanic arc toward the back-arc in Costa Rica; 3) Quaternary to present deformation within the Central Costa Rica Deformed Belt; 4) Quaternary to present shortening across the fore-arc Fila Costeña fold and thrust belt and back-arc North Panama Deformed Belt (NPDB); 5) Quaternary to present outer fore-arc uplift of Nicoya Peninsula above the seamount domain, and the Osa and Burica peninsulas above the ridge; and 6) Pleistocene to present northwestward motion of the Central American Fore Arc (CAFA) and northeastward motion of the Panama Region. We investigate the geodynamic effects of Cocos Ridge collision on motion of the Panama Region with a new geodynamic model. The model is compared to a new 1993-2015 GPS-derived three-dimensional velocity field for the western Caribbean and northwestern South America. Specifically, we test the hypotheses that the Cocos Ridge is the main driver for upper plate deformation in the western Caribbean. Our models indicate that Cocos Ridge collision drives northwest-directed motion of the CAFA and the northeast-directed motion of the Panama Region. The Panama Region is driven into the Caribbean across the NPDB and into northwestern South

  15. Transition From Archean Plume-Arc Orogens to Phanerozoic Style Convergent Margin Orogens, and Changing Mantle Lithosphere

    NASA Astrophysics Data System (ADS)

    Kerrich, R.; Jia, Y.; Wyman, D.

    2001-12-01

    Mantle plume activity was more intense in the Archean and komatiite-basalt volcanic sequences are a major component of many Archean greenstone belts. Tholeiitic basalts compositionally resemble Phanerozoic and Recent ocean plateau basalts, such as those of Ontong Java and Iceland. However, komatiite-basalt sequences are tectonically imbricated with bimodal arc lavas and associated trench turbidites. Interfingering of komatiite flows with boninite series flows, and primitive to evolved arc basalts has recently been identified in the 2.7 Ga Abitibi greenstone belt, demonstrating spatially and temporally associated plume and arc magmatism. These observations are consistent with an intra-oceanic arc migrating and capturing an ocean plateau, where the plateau jams the arc and imbricated plateau-arc crust forms a greenstone belt orogen. Melting of shallowly subducted plateau basalt crust (high Ba, Th, LREE) accounts for the areally extensive and voluminous syntectonic tonalite batholiths. In contrast, the adakite-Mg-andesite-Niobium enriched basalt association found in Archean greenstone belts and Cenozoic arcs are melts of LREE depleted MORB slab. Buoyant residue from anomalously hot mantle plume melting at > 100km rises to couple with the composite plume-arc crust to form the distinctively thick and refractory Archean continental lithospheric mantle. New geochemical data for structurally hosted ultramafic units along the N. American Cordillera, from S. California to the Yukon, show that these are obducted slices of sub-arc lithospheric mantle. Negatively fractionated HREE with high Al2O3/TiO2 ratios signify prior melt extraction, and variably enriched Th and LREE with negative Nb anomalies a subduction component in a convergent margin. A secular decrease of mantle plume activity and temperature results in plume-arc dominated geodynamics in the Archean with shallow subduction and thick CLM, whereas Phanerozoic convergent margins are dominated by arc-continent, arc

  16. Seismic evidence for central Taiwan magnetic low and deep-crustal deformation caused by plate collision

    NASA Astrophysics Data System (ADS)

    Cheng, Win-Bin

    2018-01-01

    Crustal seismic velocity structure was determined for the northern Taiwan using seismic travel-time data to investigate the northeastern extension of the northern South China Sea's high-magnetic belt. In order to increase the model resolution, a joint analysis of gravity anomaly and seismic travel-time data have been conducted. A total of 3385 events had been used in the inversion that was collected by the Central Weather Bureau Seismological Network from 1990 to 2015. The main features of the obtained three-dimensional velocity model are: (1) a relatively high Vp zone with velocity greater than 6.5 km/s is observed in the middle to lower crust, (2) the high Vp zone generally parallels to the north-south structural trending of the Chuchih fault and Hsuehshan Range, (3) at 25 km depth-slice, the high Vp zone shows structural trends change from northeastward to northward in central Taiwan, where the values of high-magnetic anomalies are rapidly decreasing to low values. A combination of seismic, GPS, and structural interpretations suggests that the entire crust has been deformed and demagnetized in consequence of the collision between the Philippine Sea plate and the Asian continental margin. We suggest that the feature of sharp bending of the high Vp zone would migrate southwestward and cause further crustal deformation of the Peikang High in the future.

  17. Lithospheric Structure Beneath Taiwan From Sp Converted Waves

    NASA Astrophysics Data System (ADS)

    Glasgow, D.; McGlashan, N.; Brown, L.

    2006-12-01

    Taiwan is the product of three dimensionally complex interaction between the Eurasian Plate (EP) and the Philippine Sea plate (PSP), with the EP subducting eastward beneath the PSP in southern Taiwan while the PSP subducts northward beneath the EP in northern Taiwan. The structural emplacement of Philippine Arc lithosphere onto Chinese passive margin lithosphere is an exemplar of continental amalgamation, yet there are relatively few contraints on the geometry of lithosphere involved at depth. We have used teleseismic data recorded by the Broadband Array for Taiwan Seismology (BATS) to compute S-to-p wave receiver functions for the Taiwan region to provide new constraints on deep geometries. Moho conversions provide independent new estimates of crustal thickness, which vary from 35 to 55 km across the island in agreement with previous P to S conversion studies and local tomography. More significantly, our results suggest that the lithosphere- asthenosphere boundary (LAB) varies in depth from ca 140 km beneath northeastern Taiwan to ca 120 km beneath central Taiwan to perhaps less than 80 km beneath southern Taiwan. We attribute this along strike variation to the depression and decapitation of the Eurasian plate in the transition to northward subduction of the PSP.

  18. Makran Mountain Range, Indus River Valley, Pakistan, India

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The enormous geologic pressures exerted by continental drift can be very well illustrated by the long northward curving parallel folded mountain ridges and valleys of the coastal Makran Range of Pakistan (27.0N, 66.0E). As a result of the collision of the northward bound Indian sub-continent into the Asian Continent, the east/west parallel range has been bent in a great northward arc and forming the Indus River valley at the interface of the collision.

  19. Back-Arc Opening in the Western End of the Okinawa Trough Revealed From GNSS/Acoustic Measurements

    NASA Astrophysics Data System (ADS)

    Chen, Horng-Yue; Ikuta, Ryoya; Lin, Cheng-Horng; Hsu, Ya-Ju; Kohmi, Takeru; Wang, Chau-Chang; Yu, Shui-Beih; Tu, Yoko; Tsujii, Toshiaki; Ando, Masataka

    2018-01-01

    We measured seafloor movement using a Global Navigation Satellite Systems (GNSS)/Acoustic technique at the south of the rifting valley in the western end of the Okinawa Trough back-arc basin, 60 km east of northeastern corner of Taiwan. The horizontal position of the seafloor benchmark, measured eight times between July 2012 and May 2016, showed a southeastward movement suggesting a back-arc opening of the Okinawa Trough. The average velocity of the seafloor benchmark shows a block motion together with Yonaguni Island. The westernmost part of the Ryukyu Arc rotates clockwise and is pulled apart from the Taiwan Island, which should cause the expansion of the Yilan Plain, Taiwan. Comparing the motion of the seafloor benchmark with adjacent seismicity, we suggest a gentle episodic opening of the rifting valley accompanying a moderate seismic activation, which differs from the case in the segment north off-Yonaguni Island where a rapid dyke intrusion occurs with a significant seismic activity.

  20. Frontal belt curvature and oblique ramp development at an obliquely collided irregular margin: Geometry and kinematics of the NW Taiwan fold-thrust belt

    NASA Astrophysics Data System (ADS)

    Lacombe, Olivier; Mouthereau, FréDéRic; Angelier, Jacques; Chu, Hao-Tsu; Lee, Jian-Cheng

    2003-06-01

    Combined structural and tectonic analyses demonstrate that the NW Foothills of the Taiwan collision belt constitute mainly an asymmetric "primary arc" type fold-thrust belt. The arcuate belt developed as a basin-controlled salient in the portion of the foreland basin that was initially thicker, due to the presence of a precollisional depocenter (the Taihsi basin). Additional but limited buttress effects at end points related to interaction with foreland basement highs (Kuanyin and Peikang highs) may have also slightly enhanced curvature. The complex structural pattern results from the interaction between low-angle thrusting related to shallow decollement tectonics and oblique inversion of extensional structures of the margin on the southern edge of the Kuanyin basement high. The tectonic regimes and mechanisms revealed by the pattern of paleostress indicators such as striated outcrop-scale faults are combined with the orientation and geometry of offshore and onshore regional faults in order to accurately define the Quaternary kinematics of the propagating units. The kinematics of this curved range is mainly controlled by distributed transpressional wrenching along the southern edge of the Kuanyin high, leading to the development of a regional-scale oblique ramp, the Kuanyin transfer fault zone, which is conjugate of the NW trending Pakua transfer fault zone north of the Peikang basement high. The divergence between the N120° regional transport direction and the maximum compressive trend that evolved from N120° to N150° (and even to N-S) in the northern part of the arc effectively supports distributed wrench deformation along its northern limb during the Pleistocene. The geometry and kinematics of the western Taiwan Foothills therefore appear to be highly influenced by both the preorogenic structural pattern of the irregularly shaped Chinese passive margin and the obliquity of its Plio-Quaternary collision with the Philippine Sea plate.

  1. Propagation of back-arc extension into the arc lithosphere in the southern New Hebrides volcanic arc

    NASA Astrophysics Data System (ADS)

    Patriat, M.; Collot, J.; Danyushevsky, L.; Fabre, M.; Meffre, S.; Falloon, T.; Rouillard, P.; Pelletier, B.; Roach, M.; Fournier, M.

    2015-09-01

    New geophysical data acquired during three expeditions of the R/V Southern Surveyor in the southern part of the North Fiji Basin allow us to characterize the deformation of the upper plate at the southern termination of the New Hebrides subduction zone, where it bends eastward along the Hunter Ridge. Unlike the northern end of the Tonga subduction zone, on the other side of the North Fiji Basin, the 90° bend does not correspond to the transition from a subduction zone to a transform fault, but it is due to the progressive retreat of the New Hebrides trench. The subduction trench retreat is accommodated in the upper plate by the migration toward the southwest of the New Hebrides arc and toward the south of the Hunter Ridge, so that the direction of convergence remains everywhere orthogonal to the trench. In the back-arc domain, the active deformation is characterized by propagation of the back-arc spreading ridge into the Hunter volcanic arc. The N-S spreading axis propagates southward and penetrates in the arc, where it connects to a sinistral strike-slip zone via an oblique rift. The collision of the Loyalty Ridge with the New Hebrides arc, less than two million years ago, likely initiated this deformation pattern and the fragmentation of the upper plate. In this particular geodynamic setting, with an oceanic lithosphere subducting beneath a highly sheared volcanic arc, a wide range of primitive subduction-related magmas has been produced including adakites, island arc tholeiites, back-arc basin basalts, and medium-K subduction-related lavas.

  2. Research of Helium Isotopes in Taiwan: The Legacy of Dr. Tsanyao Frank Yang

    NASA Astrophysics Data System (ADS)

    Yang, Tsanyao Frank; Lan, Tefang; Lee, Hsiao-Fen; Fu, Ching-Chou; Chuang, Pei-Chuan; Hong, Wei-Li; Walia, Vivek; Chen, Hsuan-Wen; Wen, Hsin-Yi; Chen, Ai-Ti; Chen, Hsiao-Chi; Chiu, Chun-Ming; Cheng, Chun-Yuan; Wu, Nian-Ru; Cheng, Yu-Chen; Chuang, Jin-Lun; Kao, Li-Hsin; Chen, Cheng-Hong; Sano, Yuji

    2016-04-01

    Helium isotope systematics is a powerful proxy to distinguish fluid origins and conveys fruitful geological information. In the past several decades, this robust isotope systematics had offered pivotal knowledge on many key issues in Earth and planetary sciences. It revealed essential geological information of Taiwan as well. Taiwan is located on the junction of two subduction systems-Ryukyu Arc and Luzon Arc. The geotectonic setting is complex and intriguing. Dr. Tsanyao Frank Yang was the pioneer of gas geochemistry studies in Taiwan. He established the first gas geochemistry laboratory in National Taiwan University in 1998 and started exploring all possible research topics on and around this tectonic-active island. In the past two decades, his research covered volcanic/hydrothermal gas studies, volcanic activity monitoring, gas hydrate exploration, soil gas as a tool to locate fault traces, soil gas flux measurement, earthquake precursory, mud volcanoes, low-temperature geochronology and many more. He died of pancreas cancer in March 2015. He was a warm and enthusiastic mentor, a prolific scientist and a great friend. He will always be remembered. Here we present Dr. Yang's achievement on helium isotopes studies in Taiwan throughout his research career. We integrate all the research results from his team and summarize the observations. We will show the distribution of helium isotope ratios in Taiwan and its implications on tectonic settings.

  3. Joint Local/Teleseismic Tomographic Inversion in Taiwan Using TAIGER and Other Data

    NASA Astrophysics Data System (ADS)

    Lee, E.; Wu, F. T.; Huang, B.; Liang, W.; Wang, C.; Rawlinson, N.; Okaya, D. A.

    2008-12-01

    Taiwan, one of the most active orogenic belts, is at the intersection of two subduction zones. In southern Taiwan, the South China Sea Slab (SCSS), part of Eurasian Plate (EP), subducts beneath the Luzon arc along the Manila trench. In northern Taiwan, the Philippine Sea Plate (PSP) subducts beneath the Ryukyu arc along the Ryukyu trench. The thin skinned model and lithospheric deformation model have been proposed to explain the formation of orogeny. To distinguish between these two geodynamically possible processes, imaging of the deep structures below Taiwan is necessary. In this study, explosion data, local/regional earthquakes and teleseisms are used to invert the velocity structures of Taiwan from surface to about 150 km. Temporary passive broadband (on land and at the ocean bottom), active sources array datasets of the TAIGER (TAiwan Integrated GEodynamics Research) project and permanent array datasets of the BATS (Broadband Array in Taiwan for Seismology) and CWB (Central Weather Bureau) are used in this study. FMTOMO (fast marching tomography) of Rawlinson et al. (2006) is employed to invert the 3D P-wavespeed beneath Taiwan. The derived velocity perturbations dVp (dVp= Vfinal-Vinital) are clearly related to geology and tectonics. At shallow depth (< 10km), dVp >0 under the Central Range (Pre-Tertiary metamorphic rocks) and dVp < 0 under the Foothills (Pliocene sedimentary). Below a depth about 20 km, the placement of the high and low anomalies is reversed, i.e., dVp>0 under the Foothills and dVp<0 under the Central Range; the low velocity core of the Central Ranges extend down to about 50 km, forming the mountain root. A steeply dipping high velocity zone lies under the thickening 'mountain root' in central Taiwan. In southern Taiwan, the high velocity zone dips eastward coinciding with the Benioff Zone. The geometry of the high velocity zones in the upper mantle are key to understanding the Taiwan orogeny.

  4. Spreading continents kick-started plate tectonics.

    PubMed

    Rey, Patrice F; Coltice, Nicolas; Flament, Nicolas

    2014-09-18

    Stresses acting on cold, thick and negatively buoyant oceanic lithosphere are thought to be crucial to the initiation of subduction and the operation of plate tectonics, which characterizes the present-day geodynamics of the Earth. Because the Earth's interior was hotter in the Archaean eon, the oceanic crust may have been thicker, thereby making the oceanic lithosphere more buoyant than at present, and whether subduction and plate tectonics occurred during this time is ambiguous, both in the geological record and in geodynamic models. Here we show that because the oceanic crust was thick and buoyant, early continents may have produced intra-lithospheric gravitational stresses large enough to drive their gravitational spreading, to initiate subduction at their margins and to trigger episodes of subduction. Our model predicts the co-occurrence of deep to progressively shallower mafic volcanics and arc magmatism within continents in a self-consistent geodynamic framework, explaining the enigmatic multimodal volcanism and tectonic record of Archaean cratons. Moreover, our model predicts a petrological stratification and tectonic structure of the sub-continental lithospheric mantle, two predictions that are consistent with xenolith and seismic studies, respectively, and consistent with the existence of a mid-lithospheric seismic discontinuity. The slow gravitational collapse of early continents could have kick-started transient episodes of plate tectonics until, as the Earth's interior cooled and oceanic lithosphere became heavier, plate tectonics became self-sustaining.

  5. New Lithospheric Model of Taiwan based on the Receiver Function Method

    NASA Astrophysics Data System (ADS)

    Wang, H.; Zhu, L.; Chen, H.

    2008-12-01

    Taiwan is situated on the junction area between two subduction systems. The complex orogeny was developed by collision between the Eurasian continental plate and Philippine Sea plate and is still active in the present. Therefore, Taiwan provides unique opportunities for geophysical imaging of the ongoing process underneath. The TAiwan Integrated GEodynamics Research (TAIGER) combined a field program of active and passive seismology, which will undoubtedly be a major step forward in understanding mountain building process. In 2006, we developed a new crustal model of Taiwan from teleseismic waveforms by the receiver function method. We determined lateral variation of Moho discontinuity, crustal thickness (H), and Vp/Vs ratios (Kappa) for each permanent broadband station using all the available teleseismic data collected by BATS (Broadband Array in Taiwan for Seismology) and CWB (Central Weather Bureau). All the broadband stations are distributed uniformly over the whole Taiwan area so that we could delineate the Moho depth contour map. Recently, we concentrated on the three linear temporary arrays of the TAIGER project and obtained three high-resolution images of crustal structure across Taiwan along west-to-east direction from north to south by using the CCP (common-conversion-point) stacking of teleseismic P-to-S converted waves. Sharp impedance contrasts in these images clearly show the relief of each of seismic discontinuities in the crust and upper mantle. The preliminary results show that the Moho depth, 40 to 50 km of central Taiwan is deeper than in other parts of the island, which suggests crustal thickening due to collision. In addition, shallow part of western foothill area show highly acoustic impedance which probably results from thick sediment.

  6. The Cocos Ridge drives collision of Panama with northwestern South America

    NASA Astrophysics Data System (ADS)

    LaFemina, Peter; Govers, Rob; Mora-Paez, Hector; Geirsson, Halldor; Cmacho, Eduardo

    2015-04-01

    The collision of the Panamanian isthmus with northwestern South America is thought to have initiated as early as Oligocene - Miocene time (23-25 Ma) based on geologic and geophysical data and paleogeographic reconstructions. This collision was driven by eastward-directed subduction beneath northwestern South America. Cocos - Caribbean convergence along the Middle America Trench, and Nazca - Caribbean oblique convergence along the South Panama Deformed Belt have resulted in complex deformation of the southwestern Caribbean since Miocene - Pliocene time. Subduction and collision of the aseismic Cocos Ridge is thought to have initiated <3.5 Ma and has been linked to: 1) late Miocene-Pliocene cessation of volcanism and uplift of the Cordillera de Talamanca; 2) Quaternary migration of the volcanic arc toward the back-arc; 3) Quaternary to present deformation within the Central Costa Rica Deformed Belt; 4) Quaternary to present shortening across the fore-arc Fila Costeña fold and thrust belt and back-arc North Panama Deformed Belt (NPDB); 5) Quaternary to present outer fore-arc uplift of Nicoya Peninsula above the seamount domain, and the Osa and Burica peninsulas above the ridge; and 6) Pleistocene to present northwestward motion of the Central American Fore Arc (CAFA) and northeastward motion of the Panama Region. We investigate the geodynamic effects of Cocos Ridge collision on motion of the Panama Region with a new geodynamic model. The model is compared to a new 1993-2015 GPS-derived three-dimensional velocity field for the western Caribbean and northwestern South America. Specifically, we test the hypotheses that the Cocos Ridge is the main driver for upper plate deformation in the western Caribbean. Our models indicate that Cocos Ridge collision drives northwest-directed motion of the CAFA and the northeast-directed motion of the Panama Region. The Panama Region is driven into the Caribbean across the NPDB and into northwestern South America, which is also

  7. Production and fate of the G ring arc particles due to Aegaeon (Saturn LIII)

    NASA Astrophysics Data System (ADS)

    Madeira, Gustavo; Sfair, R.; Mourão, D. C.; Giuliatti Winter, S. M.

    2018-04-01

    The G ring arc hosts the smallest satellite of Saturn, Aegaeon, observed with a set of images sent by Cassini spacecraft. Along with Aegaeon, the arc particles are trapped in a 7:6 corotation eccentric resonance with the satellite Mimas. Due to this resonance, both Aegaeon and the arc material are confined to within 60° of corotating longitudes. The arc particles are dust grains which can have their orbital motions severely disturbed by the solar radiation force. Our numerical simulations showed that Aegaeon is responsible for depleting the arc dust population by removing them through collisions. The solar radiation force hastens these collisions by removing most of the 10 μm sized grains in less than 40 yr. Some debris released from Aegaeon's surface by meteoroid impacts can populate the arc. However, it would take 30 000 yr for Aegaeon to supply the observed amount of arc material, and so it is unlikely that Aegaeon alone is the source of dust in the arc.

  8. Back-arc rifting at a continental margin: A case study from the Okinawa trough

    NASA Astrophysics Data System (ADS)

    Arai, R.; Kaiho, Y.; Takahashi, T.; Nakanishi, A.; Fujie, G.; Kodaira, S.; Kaneda, Y.

    2014-12-01

    The Okinawa trough, a back-arc basin formed behind the Ryukyu arc-trench system, southwest Japan, represents an active rifting zone associated with extension of the continental lithosphere. The basin is located at the southeastern margin of the Eurasian plate and characterized by axial rift valleys with over 1.0 km depth and ~100 km width. Previous studies suggest that the early rifting phase started late Miocene and crustal extension is currently active at a full rate of 30 to 50 mm/yr. Within the basin, numerous active hydrothermal vents are observed, suggesting that the crustal rifting enhances melt/heat transfer from the deep mantle up to the seafloor. However, internal structure beneath the back-arc basin and its relation to the rifting system are little documented. Complex regional tectonic setting, such as active collision in Taiwan to the west, oblique subduction of the Philippine Sea slab, and changing spreading rate along the rift axis, may also have significant influences on the thermal structure and flow within the mantle wedge, but their relative roles in controlling the rifting mode and magmatic supply are still poorly understood. As a step toward filling this gap in knowledge, we started a new 7-year project that consists of four two-dimensional active-source seismic experiments and extensive passive-source seismic observations along the Ryukyu arc. In 2013, active-source seismic data were collected on the first line that crosses the southernmost part of the Ryukyu arc-trench and Okinawa trough at 124-125°E. For refraction/wide-angle reflection analyses, a total of 60 ocean bottom seismographs were deployed with approximately 6 km spacing on a ~390-km-long profile. On the same line, multichannel seismic (MCS) reflection profiling was also carried out. Seismic velocity models obtained by first arrival tomography show that beneath the volcanic arc a thick layer (~10 km) of the middle crust with Vp = 6.0-6.8 km/s is developed, a typical feature in the

  9. Paleomagnetic Constraints on the Tectonic History of the Mesozoic Ophiolite and Arc Terranes of Western Mexico

    NASA Astrophysics Data System (ADS)

    Boschman, L.; Van Hinsbergen, D. J. J.; Langereis, C. G.; Molina-Garza, R. S.; Kimbrough, D. L.

    2017-12-01

    The North American Cordillera has been shaped by a long history of accretion of arcs and other buoyant crustal fragments to the western margin of the North American Plate since the Early Mesozoic. Accretion of these terranes resulted from a complex tectonic history interpreted to include episodes of both intra-oceanic subduction within the Panthalassa/Pacific Ocean, as well as continental margin subduction along the western margin of North America. Western Mexico, at the southern end of the Cordillera, contains a Late Cretaceous-present day long-lived continental margin arc, as well as Mesozoic arc and SSZ ophiolite assemblages of which the origin is under debate. Interpretations of the origin of these subduction-related rock assemblages vary from far-travelled exotic intra-oceanic island arc character to autochthonous or parautochthonous extended continental margin origin. We present new paleomagnetic data from four localities: (1) the Norian SSZ Vizcaíno peninsula Ophiolite; (2) its Lower Jurassic sedimentary cover; and (3) Barremian and (4) Aptian sediments derived from the Guerrero arc. The data show that the Mexican ophiolite and arc terranes have a paleolatitudinal plate motion history that is equal to that of the North American continent. This suggests that these rock assemblages were part of the overriding plate and were perhaps only separated from the North American continent by temporal fore- or back-arc spreading. These spreading phases resulted in the temporal existence of tectonic plates between the North American and Farallon Plates, and upon closure of the basins, in the growth of the North American continent without addition of any far-travelled exotic terranes.

  10. Detecting slab structure beneath the Banda Arc from waveform analysis of deep focus earthquakes

    NASA Astrophysics Data System (ADS)

    Miller, M. S.; Sun, D.; Holt, A. F.

    2017-12-01

    We investigate the structure of the subducting Australian slab by utilizing 30 recently installed, temporary broadband seismometers (YS network) in the Banda Arc region of the Indonesia archipelago. This region is of particular tectonic interest as it is the archetypal example of a young arc-continent collision along with known varied lithospheric structure of the incoming Australian plate. Previous (e.g. Widiyantoro et al. 2011) and preliminary body wave tomography (Harris et al., this session) indicate complex subducted slab structures, where gaps in fast velocity anomalies in the upper mantle are interpreted as slab tears and are linked to the variation in the incoming plate structures. The detailed shape and location of these tears are important for kinematic reconstructions and for understanding the evolution of the entire subduction system. However, tomographic images are inherently smooth due to being produced with damped inversions and therefore underestimate the sharpness of these structures. We investigate possible sharp-sided structures within and at the edges of the subducted plate from deep focus earthquakes beneath the Banda Arc that occur beneath the seismic stations. Preliminary results show that the energy associated with the P-wave first arrival exhibits large variability between waveforms recorded at different stations along the arc, both in terms of frequency content and maximum amplitudes. Three main observations are shown with these initial results: (i) Variation in frequency content along strike from the deep events; (ii) There are two "regions" that have low frequency signals which possibly correspond to subducted continental lithosphere; (iii) There are two "regions" that have high frequency signals which possibly correspond to subducted oceanic lithosphere.

  11. Xylella taiwanensis sp. nov. cause of pear leaf scorch disease in Taiwan

    USDA-ARS?s Scientific Manuscript database

    Xylella fastidiosa is a group of xylem-limited and nutritionally fastidious plant pathogenic bacteria. While mostly found in the Americas, new X. fastidiosa strains have been reported from other continents such as Asia, including a pear leaf scorch (PLS) strain from Taiwan. Current taxonomy of X. fa...

  12. Large scale obduction of preserved oceanic crust: linking the Lesser Caucasus and NE Anatolian ophiolites and implications for the formation of the Lesser Caucasus-Pontides Arc

    NASA Astrophysics Data System (ADS)

    Hassig, Marc; Rolland, Yann; Sosson, Marc; Galoyan, Ghazar; Sahakyan, Lilit; Topuz, Gultelin; Farouk Çelik, Omer; Avagyan, Ara; Muller, Carla

    2014-05-01

    During the Mesozoic, the Southern margin of the Eurasian continent was involved in the closure of the Paleotethys and opening Neotethys Ocean. Later, from the Jurassic to the Eocene, subductions, obductions, micro-plate accretions, and finally continent-continent collision occurred between Eurasia and Arabia, and resulted in the closure of Neotethys. In the Lesser Caucasus and NE Anatolia three main domains are distinguished from South to North: (1) the South Armenian Block (SAB) and the Tauride-Anatolide Platform (TAP), Gondwanian-derived continental terranes; (2) scattered outcrops of ophiolite bodies, coming up against the Sevan-Akera and Ankara-Erzincan suture zones; and (3) the Eurasian plate, represented by the Eastern Pontides margin and the Somkheto-Karabagh Arc. The slivers of ophiolites are preserved non-metamorphic relics of the now disappeared Northern Neotethys oceanic domain overthrusting onto the continental South Armenian Block (SAB) as well as on the Tauride-Anatolide plateform from the north to the south. It is important to point out that the major part of this oceanic lithosphere disappeared by subduction under the Eurasian Margin to the north. In the Lesser Caucasus, works using geochemical whole-rock analyses, 40Ar/39Ar dating of basalts and gabbro amphiboles and paleontological dating have shown that the obducted oceanic domain originates from a back-arc setting formed throughout Middle Jurassic times. The comprehension of the geodynamic evolution of the Lesser Caucasus supports the presence of two north dipping subduction zones: (1) a subduction under the Eurasian margin and to the south by (2) an intra-oceanic subduction allowing the continental domain to subduct under the oceanic lithosphere, thus leading to ophiolite emplacement. To the West, the NE Anatolian ophiolites have been intensely studied with the aim to characterize the type of oceanic crust which they originated from. Geochemical analyses have shown similar rock types as in

  13. The Development of GIS Educational Resources Sharing among Central Taiwan Universities

    NASA Astrophysics Data System (ADS)

    Chou, T.-Y.; Yeh, M.-L.; Lai, Y.-C.

    2011-09-01

    Using GIS in the classroom enhance students' computer skills and explore the range of knowledge. The paper highlights GIS integration on e-learning platform and introduces a variety of abundant educational resources. This research project will demonstrate tools for e-learning environment and delivers some case studies for learning interaction from Central Taiwan Universities. Feng Chia University (FCU) obtained a remarkable academic project subsidized by Ministry of Education and developed e-learning platform for excellence in teaching/learning programs among Central Taiwan's universities. The aim of the project is to integrate the educational resources of 13 universities in central Taiwan. FCU is serving as the hub of Center University. To overcome the problem of distance, e-platforms have been established to create experiences with collaboration enhanced learning. The e-platforms provide coordination of web service access among the educational community and deliver GIS educational resources. Most of GIS related courses cover the development of GIS, principles of cartography, spatial data analysis and overlaying, terrain analysis, buffer analysis, 3D GIS application, Remote Sensing, GPS technology, and WebGIS, MobileGIS, ArcGIS manipulation. In each GIS case study, students have been taught to know geographic meaning, collect spatial data and then use ArcGIS software to analyze spatial data. On one of e-Learning platforms provide lesson plans and presentation slides. Students can learn Arc GIS online. As they analyze spatial data, they can connect to GIS hub to get data they need including satellite images, aerial photos, and vector data. Moreover, e-learning platforms provide solutions and resources. Different levels of image scales have been integrated into the systems. Multi-scale spatial development and analyses in Central Taiwan integrate academic research resources among CTTLRC partners. Thus, establish decision-making support mechanism in teaching and

  14. Future accreted terranes: a compilation of island arcs, oceanic plateaus, submarine ridges, seamounts, and continental fragments

    NASA Astrophysics Data System (ADS)

    Tetreault, J. L.; Buiter, S. J. H.

    2014-12-01

    Allochthonous accreted terranes are exotic geologic units that originated from anomalous crustal regions on a subducting oceanic plate and were transferred to the overriding plate by accretionary processes during subduction. The geographical regions that eventually become accreted allochthonous terranes include island arcs, oceanic plateaus, submarine ridges, seamounts, continental fragments, and microcontinents. These future allochthonous terranes (FATs) contribute to continental crustal growth, subduction dynamics, and crustal recycling in the mantle. We present a review of modern FATs and their accreted counterparts based on available geological, seismic, and gravity studies and discuss their crustal structure, geological origin, and bulk crustal density. Island arcs have an average crustal thickness of 26 km, average bulk crustal density of 2.79 g cm-3, and three distinct crustal units overlying a crust-mantle transition zone. Oceanic plateaus and submarine ridges have an average crustal thickness of 21 km and average bulk crustal density of 2.84 g cm-3. Continental fragments presently on the ocean floor have an average crustal thickness of 25 km and bulk crustal density of 2.81 g cm-3. Accreted allochthonous terranes can be compared to these crustal compilations to better understand which units of crust are accreted or subducted. In general, most accreted terranes are thin crustal units sheared off of FATs and added onto the accretionary prism, with thicknesses on the order of hundreds of meters to a few kilometers. However, many island arcs, oceanic plateaus, and submarine ridges were sheared off in the subduction interface and underplated onto the overlying continent. Other times we find evidence of terrane-continent collision leaving behind accreted terranes 25-40 km thick. We posit that rheologically weak crustal layers or shear zones that were formed when the FATs were produced can be activated as detachments during subduction, allowing parts of the FAT

  15. Simulation of tectonic evolution of the Kanto basin of Japan since 1 Ma due to subduction of the Pacific and Philippine sea plates and collision of the Izu-Bonin arc

    NASA Astrophysics Data System (ADS)

    Hashima, Akinori; Sato, Toshinori; Sato, Hiroshi; Asao, Kazumi; Furuya, Hiroshi; Yamamoto, Shuji; Kameo, Koji; Miyauchi, Takahiro; Ito, Tanio; Tsumura, Noriko; Kaneda, Heitaro

    2015-04-01

    The Kanto basin, the largest lowland in Japan, developed by flexure as a result of (1) the subduction of the Philippine Sea (PHS) and the Pacific (PAC) plates and (2) the collision of the Izu-Bonin arc with the Japanese island arc. Geomorphological, geological, and thermochronological data on long-term vertical movements over the last 1 My suggest that subsidence initially affected the entire Kanto basin after which the area of subsidence gradually narrowed until, finally, the basin began to experience uplift. In this study, we modelled the tectonic evolution of the Kanto basin following the method of Matsu'ura and Sato (1989) for a kinematic subduction model with dislocations, in order to quantitatively assess the effects of PHS and PAC subduction. We include the steady slip-rate deficit (permanent locking rate at the plate interface) in our model to account for collision process. We explore how the arc-arc collision process has been affected by a westerly shift in the PHS plate motion vector with respect to the Eurasian plate, thought to have occurred between 1.0-0.5 Ma, using long-term vertical deformation data to constrain extent of the locked zone on the plate interface. We evaluated the change in vertical deformation rate for two scenarios: (1) a synchronous shift in the orientation of the locked zone as PHS plate motion shifts and (2) a delayed shift in the orientation of the locked zone following a change in plate motion. Observed changes in the subsidence/uplift pattern are better explained by scenario (2), suggesting that recent (<1 My) deformation in the Kanto basin shows a lag in crustal response to the shift in plate motion. We also calculated recent stress accumulation rates and found a good match with observed earthquake mechanisms, which shows that intraplate earthquakes serve to release stress accumulated through long-term plate interactions.

  16. ARC-1989-A89-7042

    NASA Image and Video Library

    1989-08-11

    P-34578 BW One of two new ring arcs, or partial rings, discovered by Voyager 2, is faintly visible just outside the orbit of the Neptunian moon 1989N4.The 155-second exposure taken by the spacecraft's narrow-angle camera shows the glare of an overexposed Neptune to the right of the moon and ring arc. The two bright streaks below the moon and ring arc are stars. The ring arc is approximately 50,000 kilometers (30,000 miles) long. The second ring arc, not apparent here, is about 10,000 kilometers (6,000 miles) long and is assoiciated with moon 1989N3. The ring arc, along with 1989N4, orbits about 62,000 kilometers (38,000 miles) from the planet's cloud tops. Astronomers long suspected the existence of such an irregular ring system around Neptune. Data from repeated ground-based observations hinted at the existence of irregular strands of partial rings orbiting Neptune. Voyager's photographs of the ring arcs are the first photographic evidence that such a ring system exists. Voyager scientists said the ring arcs may be comprised of debris associated with the nearby moons, or may be the remnants of moons that have been torn apart or ground down through collisions. Close-up studies of the ring arcs by Voyager 2 will help determine their composition.

  17. Geotransects in the Taiwan region

    NASA Astrophysics Data System (ADS)

    Yen, T. P.; Yeh, Yih-Hsing

    The Republic of China National Committee for the Inter-Union Commission on the Lithosphere organized an ad hoc working group in 1988 for compilation and construction of geotransects in the Taiwan region, a region considered by the scientific world as a classic example of collision and subduction of plates.Three geotransects have been constructed, with insufficient data: geotransect N along latitude 24°30‧N, geotransect M along latitude 23°30‧, and geotransect S along latitude 22°30‧N. The data used in the constructions are mainly scattered in publications on the geology and geophysics of Taiwan. The purpose of the study is to promote further investigation of the mechanism of plate motion in terms of geology and geophysics, to improve interpretation of the geotectonics of the region.

  18. OxyContin

    MedlinePlus

    ... Careers Our People Staff Volunteers Board of Directors Science Advisory Board Newsroom Annual Report & Financials Frequently Asked Questions Contact Search for: Search Home Drug Guide OxyContin OxyContin Know the facts about and OxyContin connect with help and support ...

  19. Significant strain accumulation between the deformation front and landward out-of-sequence thrusts in accretionary wedge of SW Taiwan revealed by cGPS and SAR interferometry

    NASA Astrophysics Data System (ADS)

    Tsai, M. C.

    2017-12-01

    High strain accumulation across the fold-and-thrust belt in Southwestern Taiwan are revealed by the Continuous GPS (cGPS) and SAR interferometry. This high strain is generally accommodated by the major active structures in fold-and-thrust belt of western Foothills in SW Taiwan connected to the accretionary wedge in the incipient are-continent collision zone. The active structures across the high strain accumulation include the deformation front around the Tainan Tableland, the Hochiali, Hsiaokangshan, Fangshan and Chishan faults. Among these active structures, the deformation pattern revealed from cGPS and SAR interferometry suggest that the Fangshan transfer fault may be a left-lateral fault zone with thrust component accommodating the westward differential motion of thrust sheets on both side of the fault. In addition, the Chishan fault connected to the splay fault bordering the lower-slope and upper-slope of the accretionary wedge which could be the major seismogenic fault and an out-of-sequence thrust fault in SW Taiwan. The big earthquakes resulted from the reactivation of out-of-sequence thrusts have been observed along the Nankai accretionary wedge, thus the assessment of the major seismogenic structures by strain accumulation between the frontal décollement and out-of-sequence thrusts is a crucial topic. According to the background seismicity, the low seismicity and mid-crust to mantle events are observed inland and the lower- and upper- slope domain offshore SW Taiwan, which rheologically implies the upper crust of the accretionary wedge is more or less aseimic. This result may suggest that the excess fluid pressure from the accretionary wedge not only has significantly weakened the prism materials as well as major fault zone, but also makes the accretionary wedge landward extension, which is why the low seismicity is observed in SW Taiwan area. Key words: Continuous GPS, SAR interferometry, strain rate, out-of-sequence thrust.

  20. DEVICE AND METHOD FOR PRODUCING A HIGH INTENSITY ARC DISCHARGE

    DOEpatents

    Luce, J.S.

    1960-01-01

    A device is described for producing an energetic d-c carbon arc discharge between widely spaced electrodes with arc currents in excess of 100 amperes in a magnetic field of about 3000 gauss and witnin an evacuated enclo sure at a pressure of about 10/sup -5/ mm Hg. No defining electrodes are used in the device, thus essentially eliminating the problems of shorting which heretofore limited the amount of current that could be produced in an arc discharge. The energetic carbon arc discharge is sustained by the potential across the electrodes and by carbon ions and electrons released from the electrodes during arc operation. A large part of the potential drop of the arc occurs along the arc and many energetic electrons reach the anode because the arc pressure is relatively low, and few collisions occur. The carbon discharge is also an efficient ion pump.

  1. Subsurface imaging, TAIGER experiments and tectonic models of Taiwan

    NASA Astrophysics Data System (ADS)

    Wu, Francis T.; Kuo-Chen, H.; McIntosh, K. D.

    2014-08-01

    The seismicity, deformation rates and associated erosion in the Taiwan region clearly demonstrate that plate tectonic and orogenic activities are at a high level. Major geologic units can be neatly placed in the plate tectonic context, albeit critical mapping in specific areas is still needed, but the key processes involved in the building of the island remain under discussion. Of the two plates in the vicinity of Taiwan, the Philippine Sea Plate (PSP) is oceanic in its origin while the Eurasian Plate (EUP) is comprised partly of the Asian continental lithosphere and partly of the transitional lithosphere of the South China Sea basin. It is unanimously agreed that the collision of PSP and EU is the cause of the Taiwan orogeny, but several models of the underlying geological processes have been proposed, each with its own evolutionary history and implied subsurface tectonics. TAIGER (TAiwan Integrated GEodynamics Research) crustal- and mantle-imaging experiments recently made possible a new round of testing and elucidation. The new seismic tomography resolved structures under and offshore of Taiwan to a depth of about 200 km. In the upper mantle, the steeply east-dipping high velocity anomalies from southern to central Taiwan are clear, but only the extreme southern part is associated with seismicity; toward the north the seismicity disappears. The crustal root under the Central Range is strongly asymmetrical; using 7.5 km/s as a guide, the steep west-dipping face on the east stands in sharp contrast to a gradual east-dipping face on the west. A smaller root exists under the Coastal Range or slightly to the east of it. Between these two roots lies a well delineated high velocity rise spanning the length from Hualien to Taitung. The 3-D variations in crustal and mantle structures parallel to the trend of the island are closely correlated with the plate tectonic framework of Taiwan. The crust is thickest in the central Taiwan collision zone, and although it thins

  2. Variation in forearc basin development along the Sunda Arc, Indonesia

    NASA Astrophysics Data System (ADS)

    van der Werff, W.

    The present forearc basin configuration along the Sunda Arc initially appears to have been controlled by extension and differential subsidence of basement blocks in response to the late Eocene collision of India with Asia. The late Oligocene increase in convergence between the South-east Asian and Indian Plates associated with a new pulse of subduction, resulted in basement uplift and the formation of a regional unconformity that can be recognized along the entire Sunda Arc. From the early to late Miocene, the Sumba and Savu forearc sectors along the eastern Sunda Arc may have been characterized by forearc extension. Submarine fan deposition on the arcward side of the evolving accretionary prism represents the first phase in forearc basin deposition. These fans were subsequently covered by basin and slope sediments derived from the evolving magmatic arc. Structural response to increased late Miocene compression varied along strike of the Sunda Arc. North of Bali, Lombok and Sumbawa, the incipient collision between Australia and the western Banda Arc caused back-arc thrusting and basin inversion. Towards the south of Java, an increase in both the size of the accretionary prism and convergence rates resulted in uplift and large scale folding of the outer forearc basin strata. Along the west coast of Sumatra, increased compression resulted in uplift along the inner side of the forearc along older transcurrent faults. Uplift of West Sumatra was followed by the deposition of a westward prograding sequence of terrigenous sediments that resulted in the development of a broad shelf. Initial forearc basin subsidence relates to the age of the subducting oceanic lithosphere, on top of which the basin is situated. Along the western Sunda Arc, both fexural loading of the evolving accretionary prism, and across arc strike-slip faulting represent additional factors that result in forearc subsidence.

  3. Towards a theory for Neptune's arc rings

    NASA Technical Reports Server (NTRS)

    Goldreich, P.; Tremaine, S.; Borderies, N.

    1986-01-01

    It is proposed that the incomplete rings of Neptune consist of a number of short arcs centered on the corotation resonances of a single satellite. The satellite must have a radius of the order of 100 km or more and move on an inclined orbit. Corotation resonances are located at potential maxima. Thus, mechanical energy dissipated by interparticle collisions must be continually replenished to prevent the arcs from spreading. It is shown that each corotation resonance is associated with a nearby Lindblad resonance, which excites the ring particles' orbital eccentricity, thus supplying the energy required to maintain the arc. The ultimate energy reservoir is the satellite's orbital energy. Therefore, interaction with the arcs damps the satellite's orbital inclination. The self-gravity of the arcs limits their contraction and enforces a relation between arc length and mass. The estimated arc masses are so small, of the order of 10 to the 16th g, that the satellite's orbital inclination suffers negligible decay over the age of the solar system. The inferred surface mass densities are comparable to those found in the major rings of Saturn and Uranus.

  4. Application of INCSEA principles to the Taiwan Strait.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wen-Chung, Chai

    2003-06-01

    The waters surrounding Taiwan are important international waterways. In addition to merchant ships of every nation, the warships of the United States, Japan, Russia, and China may appear in these waters. No hostility is expected between Taiwan and the United States, Japan, or Russia; however, Taiwan and China have a tense relationship, and both sides face a potential for naval incidents. As Taiwan and China expand their naval capability, the International Maritime Organization Convention for the lnternational Regulations for Preventing Collisions at Sea may not be sufficient to prevent naval incidents, any of which might develop into conflict or war.more » Therefore, China and Taiwan need to develop maritime confidence building measures (CBMs) that could reduce the chance of naval incidents and strengthen mutual trust and confidence. Among the variety of maritime CBM concepts for military purposes, the most successful and effective measure has been the 1972 U.S.-Soviet Union Agreement on the Prevention of Incidents On and Over the High Seas (INCSEA). The success of the agreement demonstrates that CBMs represent a workable alternative to traditional arms controls. The purpose of this paper is to suggest a concrete approach to the constraint of naval activities between China and Taiwan to reduce accidents and misunderstandings. This paper outlines the categories and characteristics of incidents at sea. Next, the author identifies the successful factors of the U.S.-Soviet INCSEA and applies the INCSEA concept to the Taiwan Strait. Finally, the author develops a framework of options and a step-by-step approach for establishing an INCSEA between Taiwan and China.« less

  5. New gravity anomaly map of Taiwan and its surrounding regions with some tectonic interpretations

    NASA Astrophysics Data System (ADS)

    Doo, Wen-Bin; Lo, Chung-Liang; Hsu, Shu-Kun; Tsai, Ching-Hui; Huang, Yin-Sheng; Wang, Hsueh-Fen; Chiu, Shye-Donq; Ma, Yu-Fang; Liang, Chin-Wei

    2018-04-01

    In this study, we compiled recently collected (from 2005 to 2015) and previously reported (published and open access) gravity data, including land, shipborne and satellite-derived data, for Taiwan and its surrounding regions. Based on the cross-over error analysis, all data were adjusted; and, new Free-air gravity anomalies were obtained, shedding light on the tectonics of the region. To obtain the Bouguer gravity anomalies, the densities of land terrain and marine sediments were assumed to be 2.53 and 1.80 g/cm3, respectively. The updated gravity dataset was gridded with a spacing of one arc-minute. Several previously unnoticed gravity features are revealed by the new maps and can be used in a broad range of applications: (1) An isolated gravity high is located between the Shoushan and the Kaoping Canyon off southwest Taiwan. (2) Along the Luzon Arc, both Free-air and Bouguer gravity anomaly maps reveal a significant gravity discontinuity feature at the latitude of 21°20‧N. (3) In the southwestern Okinawa Trough, the NE-SW trending cross-back-arc volcanic trail (CBVT) marks the low-high gravity anomaly (both Free-air and Bouguer) boundary.

  6. Precambrian Continent Arctida: A New Kinematic Reconstruction of Late Precambrian - Early Paleozoic Arctida U Europe (baltia) Collision

    NASA Astrophysics Data System (ADS)

    Borisova, T. P.; Guertseva, M. V.; Egorov, A. Ju.; Kononov, M. V.; Kouznetsov, N. B.

    In according to L.P.Zonenshain and L.M.Natapov (1988, 1990), different size conti- nental blocks locating at the margins and inside of present-day Arctic ocean composed the hypothetical early Paleozoic paleocontinent Arctida. The blocks are Kara block (north part of Taymir peninsula, Severnaja Zemlja archipelago and Franz Joseph Land archipelago), north part of Alaska (northward Bruks ridge), Chukchi block, Novosi- birsky block (Novosibirskiye islands together their shelves), several fragments north- ward to the Innuitian orogen (north parts of Peary Land and Ellesmere Island), and Lomonosov ridgeSs block. In the previous kinematic reconstruction it was believed that Arctida as a whole collided with north flanks of Laurentia (Innuitian margin) and Europe (Baltia, Barentsia margin) in middle Paleozoic time. Later, the Arctida (been a fragment of supercontinent Pangea) was fragmented due to a spreading in the Arctic ocean and north part of Atlantic ocean in late Mesozoic and Cenozoic times. Then ArctidaSs fragments were accreted to the Eurasia and North America conti- nents. During the last decade "AEROGEOLOGIA" company has been gathered new data (geologic, stratigraphical, paleomagnetic, and others) of Russian Arctic sector and Svalbard. The data were summarized into "Paleogeographical Atlas for the Rus- sian Arctic sector and Svalbard from Vendian to Jurassic times" (see Abstact SE1.04, ID-NR: EGS02-A-02453). An analyzing of the maps for Vend and Cambrian times allows us to reconsider a few stages of kinematic scenario of late Precambrian - early Paleozoic Arctida U Europe collision. 1) Old interpretation: Arctida was considered as an isolated paleocontinent during early Paleozoic time. New interpretation: during the early Paleozoic Arctida together Europe (Baltia) were assembled into a paleo- continent named us Arcteurope. This conclusion is based on excellent coincidence of Paleozoic paleomagnetic poles of the Kara block (which is a part of Arctida) and Europe

  7. A numerical investigation of continental collision styles

    NASA Astrophysics Data System (ADS)

    Ghazian, Reza Khabbaz; Buiter, Susanne J. H.

    2013-06-01

    Continental collision after closure of an ocean can lead to different deformation styles: subduction of continental crust and lithosphere, lithospheric thickening, folding of the unsubducted continents, Rayleigh-Taylor (RT) instabilities and/or slab break-off. We use 2-D thermomechanical models of oceanic subduction followed by continental collision to investigate the sensitivity of these collision styles to driving velocity, crustal and lithospheric temperature, continental rheology and the initial density difference between the oceanic lithosphere and the asthenosphere. We find that these parameters influence the collision system, but that driving velocity, rheology and lithospheric (rather than Moho and mantle) temperature can be classified as important controls, whereas reasonable variations in the initial density contrast between oceanic lithosphere and asthenosphere are not necessarily important. Stable continental subduction occurs over a relatively large range of values of driving velocity and lithospheric temperature. Fast and cold systems are more likely to show folding, whereas slow and warm systems can experience RT-type dripping. Our results show that a continent with a strong upper crust can experience subduction of the entire crust and is more likely to fold. Accretion of the upper crust at the trench is feasible when the upper crust has a moderate to weak strength, whereas the entire crust can be scraped-off in the case of a weak lower crust. We also illustrate that weakening of the lithospheric mantle promotes RT-type of dripping in a collision system. We use a dynamic collision model, in which collision is driven by slab pull only, to illustrate that adjacent plates can play an important role in continental collision systems. In dynamic collision models, exhumation of subducted continental material and sediments is triggered by slab retreat and opening of a subduction channel, which allows upward flow of buoyant materials. Exhumation continues

  8. Tibet and Beyond: Magmatic Records from CIA (Caucasus-Iran-Anatolia) and Southern Tibet with Implications for Asian Orogeny and Continental Growth

    NASA Astrophysics Data System (ADS)

    Chung, Sun-Lin

    2016-04-01

    This study, based on an ongoing joint research project "Tibet and Beyond", presents a synthesis of principal magmatic records from the CIA (Caucasus-Iran-Anatolia) and Tibet-Himalaya orogens resulting from the continental collisions of Arabia and India, respectively, with Eurasia. In both orogens, through this and other recent studies, the temporal and spatial variations in magmatism pre-, syn- and post-dating the collisions can now be much better defined, thus improving our understanding of collision zone magmatism that appears to have evolved with changes in the lithospheric structures over time and space by collisional processes. The two "collisional" Tethyan orogens were preceded by accretionary orogenic processes, which not only had produced a substantial amount of juvenile continental crust but also fulfill the "orogenic cycle" that evolved from an accretionary into a collisional system. Geochemical data reveal that in contrast to generating vast portions of juvenile crust in the early, accretionary stages of orogenic development, crustal recycling plays a more important role in the later, collisional stages. The latter, as exemplified in SE Turkey and southern Tibet, involves addition of older continental crust material back into the mantle, which subsequently melted and caused compositional transformation of the juvenile crust produced in the accretionary stages. Similar features are observed in young volcanic rocks from eastern Taiwan, the northern Luzon arc complex and part of the active subduction/accretion/collision system in Southeast Asia that may evolve one day to resemble the eastern Tethyan and central Asian orogenic belts by collision with the advancing Australian continent.

  9. [An alternative continence mechanism for continent catheterisable micturation].

    PubMed

    Honeck, P; Alken, P

    2010-01-01

    The creation of a stable, reliable, continent and easily catheterisable continence mechanism is an essential prerequisite for the construction of a continent cutaneous urinary reservoir. Although a substantial number of surgical methods has been described, construction is still a complex surgical procedure. The aim of this study was the evaluation of a new method for a continence mechanism using stapled small or large intestine. Small and large pig intestine was used for construction. For stapling the tube a 3 cm or 6 cm double row stapling system was used. Two variations using small and large intestine segments were constructed (IL 1, COL 1, COL 2). A 3 or 6 cm long stapler line was placed alongside a 12 Fr catheter positioned at the antimesenterial side creating a partially two-luminal segment. The open end of the non-catheterised lumen and the opposite intestinal end were closed by continuous sutures. The created tube was then embedded into the pouch. Pressure evaluation was performed for each variation. Intermittent external manual compression was used to simulate sudden pressure exposure. Construction times for the IL 1 and COL 1 variations were 10 +/- 1.5 min and 6.2 +/- 1.3 min for COL 2. All variations showed no leakage during filling or external compression. The maximum capacity was lower for the IL 1 compared to the COL variation. The maximum pressure levels reached did not differ significantly. The described technique is an easy and fast method to construct a continent and easy to catheterize continence mechanism using small or large intestine.

  10. Albari granodiorite - a typical calcalkaline diapir of volcanic arc stage from the Arabian Shield

    NASA Astrophysics Data System (ADS)

    Radain, Abdulaziz A.

    Granodiorite rocks of the Arabian Shield are generally considered to be collision-related granitoids. However, there are some granodiorites that were formed during the volcanic arc stage. Major and trace elements studies are carried out on Albari diapiric granodiorite to reveal its tectonic environment. This intrusive rock type is common in the Taif arc province (Mahd adh Dhahab quadrangle) of the Asir microplate near the border of the southeast dipping subduction zone that ended up with arc-arc collision (Asir-Hijaz microplates) along the now known Bir Umq suture zone. The granodiorite exhibits a calcalkaline trend on ternary AFM and K 2ONa 2OCaO diagrams. Tectonic discrimination diagrams using multicationic parameters (R1 = 4Sill(Na+K)2(Fe+Ti); R2 = 6Ca+2Mg+Al), SiO 2-trace elements (Nb, Y, Rb), and Y versus Nb and Rb versus (Y+Nb) indicate a destructive active plate margin or volcanic arc stage tectonic environment. Albari calcalkaline granodiorite might have been derived directly from partial melting of subducted oceanic crust or overlying mantle contaminated with variable amounts of intermediate (quartz diorite, diorite, tonalite, trondhjemite) early and late volcanic arc-related plutonic country rocks.

  11. Role of local to regional-scale collisions in the closure history of the Southern Neotethys, exemplified by tectonic development of the Kyrenia Range active margin/collisional lineament, N Cyprus

    NASA Astrophysics Data System (ADS)

    Robertson, Alastair; Kinnaird, Tim; McCay, Gillian; Palamakumbura, Romesh; Chen, Guohui

    2016-04-01

    Active margin processes including subduction, accretion, arc magmatism and back-arc extension play a key role in the diachronous, and still incomplete closure of the S Neotethys. The S Neotethys rifted along the present-day Africa-Eurasia continental margin during the Late Triassic and, after sea-floor spreading, began to close related to northward subduction during the Late Cretaceous. The northern, active continental margin of the S Neotethys was bordered by several of the originally rifted continental fragments (e.g. Taurides). The present-day convergent lineament ranges from subaqueous (e.g. Mediterranean Ridge), to subaerial (e.g. SE Turkey). The active margin development is partially obscured by microcontinent-continent collision and post-collisional strike-slip deformation (e.g. Tauride-Arabian suture). However, the Kyrenia Range, N Cyprus provides an outstanding record of convergent margin to early stage collisional processes. It owes its existence to strong localised uplift during the Pleistocene, which probably resulted from the collision of a continental promontory of N Africa (Eratosthenes Seamount) with the long-lived S Neotethyan active margin to the north. A multi-stage convergence history is revealed, mainly from a combination of field structural, sedimentological and igneous geochemical studies. Initial Late Cretaceous convergence resulted in greenschist facies burial metamorphism that is likely to have been related to the collision, then rapid exhumation, of a continental fragment (stage 1). During the latest Cretaceous-Palaeogene, the Kyrenia lineament was characterised by subduction-influenced magmatism and syn-tectonic sediment deposition. Early to Mid-Eocene, S-directed thrusting and folding (stage 2) is likely to have been influenced by the suturing of the Izmir-Ankara-Erzincan ocean to the north ('N Neotethys'). Convergence continued during the Neogene, dominated by deep-water terrigenous gravity-flow accumulation in a foredeep setting

  12. The Moho discontinuity beneath Taiwan orogenic zone inferred from receiver function analysis

    NASA Astrophysics Data System (ADS)

    Chang, H.; Chen, C.; Liang, W.

    2013-12-01

    We determine the depth variations of the Moho discontinuity beneath Taiwan from receiver function analysis. Taiwan is a young (~6.5 Ma) orogenic zone as a consequence of oblique collision between the Philippine Sea Plate and the Eurasian Plate. In northeastern Taiwan, the Philippine Sea Plate subducts northwestward under the Eurasian Plate along the Ryukyu Trench; in southern Taiwan, the Eurasian Plate subducts eastward beneath the Philippine Sea Plate along the Manila Trench. Recent tomographic models of Taiwan reveal P-wave velocity variations of the lithospheric structure that provide important constraints on the orogenic processes in this region. However, the depth variations of the Moho discontinuity, a key observation for better understanding crustal deformation, remain elusive. In this study, we aim to delineate the Moho depth variations by analyzing seismic converted phases indicative of the presence of discontinuity structure. We analyze waveform data from teleseismic events recorded at the Broadband Array in Taiwan for Seismology (BATS). Preliminary results of receiver functions beneath BATS stations in eastern Taiwan show that more than one converted phase (P-to-S) are likely present in crustal depths, suggesting possible multiple crustal layering, which may complicate the detection of the Moho. We further carry out synthetic experiments to explore possible crustal structures that reconcile our observations.

  13. Continental collision with a sandwiched accreted terrane: Insights into Himalayan-Tibetan lithospheric mantle tectonics?

    NASA Astrophysics Data System (ADS)

    Kelly, Sean; Butler, Jared P.; Beaumont, Christopher

    2016-12-01

    Many collisional orogens contain exotic terranes that were accreted to either the subducting or overriding plate prior to terminal continent-continent collision. The ways in which the physical properties of these terranes influence collision remain poorly understood. We use 2D thermomechanical finite element models to examine the effects of prior 'soft' terrane accretion to a continental upper plate (retro-lithosphere) on the ensuing continent-continent collision. The experiments explore how the style of collision changes in response to variations in the density and viscosity of the accreted terrane lithospheric mantle, as well as the density of the pro-lithospheric mantle, which determines its propensity to subduct or compress the accreted terrane and retro-lithosphere. The models evolve self-consistently through several emergent phases: breakoff of subducted oceanic lithosphere; pro-continent subduction; shortening of the retro-lithosphere accreted terrane, sometimes accompanied by lithospheric delamination; and, terminal underthrusting of pro-lithospheric mantle beneath the accreted terrane crust or mantle. The modeled variations in the properties of the accreted terrane lithospheric mantle can be interpreted to reflect metasomatism during earlier oceanic subduction beneath the terrane. Strongly metasomatized (i.e., dense and weak) mantle is easily removed by delamination or entrainment by the subducting pro-lithosphere, and facilitates later flat-slab underthrusting. The models are a prototype representation of the Himalayan-Tibetan orogeny in which there is only one accreted terrane, representing the Lhasa terrane, but they nonetheless exhibit processes like those inferred for the more complex Himalayan-Tibetan system. Present-day underthrusting of the Tibetan Plateau crust by Indian mantle lithosphere requires that the Lhasa terrane lithospheric mantle has been removed. Some of the model results support previous conceptual interpretations that Tibetan

  14. Caribbean basin framework, 3: Southern Central America and Colombian basin

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kolarsky, R.A.; Mann, P.

    1991-03-01

    The authors recognize three basin-forming periods in southern Central America (Panama, Costa Rica, southern Nicaragua) that they attempt to correlate with events in the Colombian basin (Bowland, 1984): (1) Early-Late Cretaceous island arc formation and growth of the Central American island arc and Late Cretaceous formation of the Colombian basin oceanic plateau. During latest Cretaceous time, pelagic carbonate sediments blanketed the Central American island arc in Panama and Costa Rica and elevated blocks on the Colombian basin oceanic plateau; (2) middle Eocene-middle Miocene island arc uplift and erosion. During this interval, influx of distal terrigenous turbidites in most areas ofmore » Panama, Costa Rica, and the Colombian basin marks the uplift and erosion of the Central American island arc. In the Colombian basin, turbidites fill in basement relief and accumulate to thicknesses up to 2 km in the deepest part of the basin. In Costa Rica, sedimentation was concentrated in fore-arc (Terraba) and back-arc (El Limon) basins; (3) late Miocene-Recent accelerated uplift and erosion of segments of the Central American arc. Influx of proximal terrigenous turbidites and alluvial fans in most areas of Panama, Costa Rica, and the Colombian basin marks collision of the Panama arc with the South American continent (late Miocene early Pliocene) and collision of the Cocos Ridge with the Costa Rican arc (late Pleistocene). The Cocos Ridge collision inverted the Terraba and El Limon basins. The Panama arc collision produced northeast-striking left-lateral strike-slip faults and fault-related basins throughout Panama as Panama moved northwest over the Colombian basin.« less

  15. Earth's first stable continents did not form by subduction.

    PubMed

    Johnson, Tim E; Brown, Michael; Gardiner, Nicholas J; Kirkland, Christopher L; Smithies, R Hugh

    2017-03-09

    The geodynamic environment in which Earth's first continents formed and were stabilized remains controversial. Most exposed continental crust that can be dated back to the Archaean eon (4 billion to 2.5 billion years ago) comprises tonalite-trondhjemite-granodiorite rocks (TTGs) that were formed through partial melting of hydrated low-magnesium basaltic rocks; notably, these TTGs have 'arc-like' signatures of trace elements and thus resemble the continental crust produced in modern subduction settings. In the East Pilbara Terrane, Western Australia, low-magnesium basalts of the Coucal Formation at the base of the Pilbara Supergroup have trace-element compositions that are consistent with these being source rocks for TTGs. These basalts may be the remnants of a thick (more than 35 kilometres thick), ancient (more than 3.5 billion years old) basaltic crust that is predicted to have existed if Archaean mantle temperatures were much hotter than today's. Here, using phase equilibria modelling of the Coucal basalts, we confirm their suitability as TTG 'parents', and suggest that TTGs were produced by around 20 per cent to 30 per cent melting of the Coucal basalts along high geothermal gradients (of more than 700 degrees Celsius per gigapascal). We also analyse the trace-element composition of the Coucal basalts, and propose that these rocks were themselves derived from an earlier generation of high-magnesium basaltic rocks, suggesting that the arc-like signature in Archaean TTGs was inherited from an ancestral source lineage. This protracted, multistage process for the production and stabilization of the first continents-coupled with the high geothermal gradients-is incompatible with modern-style plate tectonics, and favours instead the formation of TTGs near the base of thick, plateau-like basaltic crust. Thus subduction was not required to produce TTGs in the early Archaean eon.

  16. Pliocene granodioritic knoll with continental crust affinities discovered in the intra-oceanic Izu-Bonin-Mariana Arc: Syntectonic granitic crust formation during back-arc rifting

    NASA Astrophysics Data System (ADS)

    Tani, Kenichiro; Dunkley, Daniel J.; Chang, Qing; Nichols, Alexander R. L.; Shukuno, Hiroshi; Hirahara, Yuka; Ishizuka, Osamu; Arima, Makoto; Tatsumi, Yoshiyuki

    2015-08-01

    A widely held hypothesis is that modern continental crust of an intermediate (i.e. andesitic) bulk composition forms at intra-oceanic arcs through subduction zone magmatism. However, there is a critical paradox in this hypothesis: to date, the dominant granitic rocks discovered in these arcs are tonalite, rocks that are significantly depleted in incompatible (i.e. magma-preferred) elements and do not geochemically and petrographically represent those of the continents. Here we describe the discovery of a submarine knoll, the Daisan-West Sumisu Knoll, situated in the rear-arc region of the intra-oceanic Izu-Bonin-Mariana Arc. Remotely-operated vehicle surveys reveal that this knoll is made up entirely of a 2.6 million year old porphyritic to equigranular granodiorite intrusion with a geochemical signature typical of continental crust. We present a model of granodiorite magma formation that involves partial remelting of enriched mafic rear-arc crust during the initial phase of back-arc rifting, which is supported by the preservation of relic cores inherited from initial rear-arc source rocks within magmatic zircon crystals. The strong extensional tectonic regime at the time of intrusion may have allowed the granodioritic magma to be emplaced at an extremely shallow level, with later erosion of sediment and volcanic covers exposing the internal plutonic body. These findings suggest that rear-arc regions could be the potential sites of continental crust formation in intra-oceanic convergent margins.

  17. Initial India-Asia Collision: Sedimentologic, Paleomagnetic and Paleontologic Evidence From the Ghazij Formation, Balochistan, Pakistan

    NASA Astrophysics Data System (ADS)

    Clyde, W. C.; Khan, I. H.; Gingerich, P. D.

    2003-12-01

    Initial continental collision between India and Asia is thought to have caused significant changes to global climate and biota, yet its timing and biogeographic consequences are uncertain. Structural and geophysical evidence indicates initial collision during the early Paleogene, but sedimentary evidence of this has been controversial owing to the intense deformation and metamorphism along the suture zone. Modern orders of mammals that appeared abruptly on northern continents coincident with the global warming event marking the Paleocene-Eocene boundary are hypothesized to have originated on the Indian subcontinent, but no relevant paleontologic information has been available to test this idea. Here we present sedimentologic, paleomagnetic, and paleontologic results that show the lower Eocene Ghazij Formation of western Pakistan records continental sedimentation and mammalian dispersal associated with initial India-Asia collision. Sedimentologically, the Ghazij exhibits a clear transition from shallow-marine facies in the lower part, to paralic deltaic facies in the middle part, and continental fluvial facies in the upper part. Paleomagnetic data indicate that Ghazij deposition occurred just before a pronounced decrease in the sea-floor spreading rate of the Indian Ocean. Large fossil mammal assemblages show strong endemism in the middle part of the formation but increasing cosmopolitanism and affiliation with northern continents higher in the formation. Our results support the hypothesis that initial continent-continent contact occurred near the Paleocene-Eocene boundary along the northwest edge of the Indo-Pakistan plate and that subsequent closure occurred diachronously along the rest of the suture. However, it appears that during initial collision, modern orders of mammals dispersed into India rather than out of it.

  18. The Geothermal Potential, Current and Opportunity in Taiwan

    NASA Astrophysics Data System (ADS)

    Song, Sheng-Rong

    2016-04-01

    Located in the west Pacific Rim of Fire, Taiwan possesses rich geothermal resources due to volcanic activities and rapid uplifting of plate collision. Based on available data prior to 1980, Taiwan may have about 1 GWe of potential shallow geothermal energy, which is less than 3% of the national gross power generation. A 3-Mw pilot power plant, therefore, was constructed in 1981 and terminated in 1993 in the Chingshui geothermal field of Ilan, northeastern Taiwan. Recently, one of the National Science & Technology Program (NSTP) projects has been conducting research and reevaluating the island-wide deep geothermal energy. Four hot potential sites have been recognized. They are: (1) Tatun Volcano Group of northern Taiwan; (2) I-Lan Plain of NE Taiwan; (3) Lu-Shan area of Central Taiwan; and (4) Hua-Tung area of eastern Taiwan. We found that the geothermal resource in Taiwan may be as high as 160 GWe, with 33.6 GWe of exploitable geothermal energy. There are no any commercial geothermal power plants until now in Taiwan, although the potential is great. However, geothermal energy has been listed as one of major tasks of National Energy Program, Phase II (NEP-II) in Taiwan. We will conduct more detailed geothermal energy surveys on some proposed hot sites and to construct an EGS pilot geothermal plant with 1 MWe capability in a few years. Currently, there are three nuclear power plants, named No. 1, 2 & 3, in operations, which produce 16.5% gross generation of electricity and one (No. 4) is under construction, but is stopped and sealed now in Taiwan. Furthermore, the life-span of 40-year operation for those three power plants will be close-at hand and retire in 2018-2019, 2021-2023 and 2024-2025, respectively. Therefore, to find alternative energy sources, especially on the clean, renewable and sustainable ones for generating electricity are emergent and important for Taiwan's government in next few years. Among various energy sources, geothermal energy can be as base

  19. Basalts erupted along the Tongan fore arc during subduction initiation: Evidence from geochronology of dredged rocks from the Tonga fore arc and trench

    NASA Astrophysics Data System (ADS)

    Meffre, Sebastian; Falloon, Trevor J.; Crawford, Tony J.; Hoernle, Kaj; Hauff, Folkmar; Duncan, Robert A.; Bloomer, Sherman H.; Wright, Dawn J.

    2012-12-01

    A wide variety of different rock types were dredged from the Tonga fore arc and trench between 8000 and 3000 m water depths by the 1996 Boomerang voyage. 40Ar-39Ar whole rock and U-Pb zircon dating suggest that these fore arc rocks were erupted episodically from the Cretaceous to the Pliocene (102 to 2 Ma). The geochemistry suggests that MOR-type basalts and dolerites were erupted in the Cretaceous, that island arc tholeiites were erupted in the Eocene and that back arc basin and island arc tholeiite and boninite were erupted episodically after this time. The ages generally become younger northward suggesting that fore arc crust was created in the south at around 48-52 Ma and was extended northward between 35 and 28 Ma, between 9 and 15 Ma and continuing to the present-day. The episodic formation of the fore arc crust suggested by this data is very different to existing models for fore arc formation based on the Bonin-Marianas arc. The Bonin-Marianas based models postulate that the basaltic fore arc rocks were created between 52 and 49 Ma at the beginning of subduction above a rapidly foundering west-dipping slab. Instead a model where the 52 Ma basalts that are presently in a fore arc position were created in the arc-back arc transition behind the 57-35 Ma Loyalty-Three Kings arc and placed into a fore arc setting after arc reversal following the start of collision with New Caledonia is proposed for the oldest rocks in Tonga. This is followed by growth of the fore arc northward with continued eruption of back arc and boninitic magmas after that time.

  20. Subduction Orogeny and the Late Cenozoic Evolution of the Mediterranean Arcs

    NASA Astrophysics Data System (ADS)

    Royden, Leigh; Faccenna, Claudio

    2018-05-01

    The Late Cenozoic tectonic evolution of the Mediterranean region, which is sandwiched between the converging African and European continents, is dominated by the process of subduction orogeny. Subduction orogeny occurs where localized subduction, driven by negative slab buoyancy, is more rapid than the convergence rate of the bounding plates; it is commonly developed in zones of early or incomplete continental collision. Subduction orogens can be distinguished from collisional orogens on the basis of driving mechanism, tectonic setting, and geologic expression. Three distinct Late Cenozoic subduction orogens can be identified in the Mediterranean region, making up the Western Mediterranean (Apennine, external Betic, Maghebride, Rif), Central Mediterranean (Carpathian), and Eastern Mediterranean (southern Dinaride, external Hellenide, external Tauride) Arcs. The Late Cenozoic evolution of these orogens, described in this article, is best understood in light of the processes that govern subduction orogeny and depends strongly on the buoyancy of the locally subducting lithosphere; it is thus strongly related to paleogeography. Because the slow (4–10 mm/yr) convergence rate between Africa and Eurasia has preserved the early collisional environment, and associated tectonism, for tens of millions of years, the Mediterranean region provides an excellent opportunity to elucidate the dynamic and kinematic processes of subduction orogeny and to better understand how these processes operate in other orogenic systems.

  1. Extrusional Tectonics over Plate Corner: an Example in Northern Taiwan

    NASA Astrophysics Data System (ADS)

    Lu, Chia-Yu; Lee, Jian-Cheng; Li, Zhinuo; Lee, Ching-An; Yeh, Chia-Hung

    2016-04-01

    In northern Taiwan, contraction, transcurrent shearing, block rotation and extension are four essential tectonic deformation mechanisms involved in the progressive deformation of this arcuate collision mountain belt. The neotectonic evolution of the Taiwan mountain belt is mainly controlled not only by the oblique convergence between the Eurasian plate and the Philippine Sea plate but also the corner shape of the plate boundary. Based on field observations and analyses, and taking geophysical data (mostly GPS) and experimental modelling into account, we interpret the curved belt of northern Taiwan as a result of of contractional deformation (with compression, thrust-sheet stacking & folding, back thrust duplex & back folding) that induced vertical extrusion, combined with increasing transcurrent & rotational deformation (with transcurrent faulting, bookshelf-type strike-slip faulting and block rotation) that induced transcurrent/rotational extrusion and extension deformation which in turn induced extensional extrusion. As a consequence, a special type of extrusional folds was formed in association with contractional, transcurrent & rotational and extensional extrusions subsequently. The extrusional tectonics in northern Taiwan reflect a single, albeit complicated, regional pattern of deformation. The crescent-shaped mountain belt of Northeastern Taiwan develops in response to oblique indentation by an asymmetric wedge indenter, retreat of Ryukyu trench and opening of the Okinawa trough.

  2. Extrusional Tectonics at Plate Corner: an Example in Northern Taiwan

    NASA Astrophysics Data System (ADS)

    Lu, C. Y.; Lee, J. C.; Li, Z.; Yeh, C. H.; Lee, C. A.

    2015-12-01

    In northern Taiwan, contraction, transcurrent shearing, block rotation and extension are four essential tectonic deformation mechanisms involved in the progressive deformation of this arcuate collision mountain belt. The neotectonic evolution of the Taiwan mountain belt is mainly controlled not only by the oblique convergence between the Eurasian plate and the Philippine Sea plate but also the corner shape of the plate boundary. Based on field observations and analyses, and taking geophysical data (mostly GPS) and experimental modelling into account, we interpret the curved belt of northern Taiwan as a result of of contractional deformation (with compression, thrust-sheet stacking & folding, back thrust duplex & back folding) that induced vertical extrusion, combined with increasing transcurrent & rotational deformation (with transcurrent faulting, bookshelf-type strike-slip faulting and block rotation) that induced transcurrent/rotational extrusion and extension deformation which in turn induced extensional extrusion. As a consequence, a special type of extrusional folds was formed in association with contractional, transcurrent & rotational and extensional extrusions subsequently. The extrusional tectonics in northern Taiwan reflect a single, albeit complicated, regional pattern of deformation. The crescent-shaped mountain belt of Northeastern Taiwan develops in response to oblique indentation by an asymmetric wedge indenter and opening of the Okinawa trough at plate corner.

  3. Results from CAT/SCAN, the Calabria-Apennine-Tyrrhenian/Subduction-Accretion-Collision Network

    NASA Astrophysics Data System (ADS)

    Steckler, M. S.; Amato, A.; Guerra, I.; Armbruster, J.; Baccheschi, P.; Diluccio, F.; Gervasi, A.; Harabaglia, P.; Kim, W.; Lerner-Lam, A.; Margheriti, L.; Seeber, L.; Tolstoy, M.; Wilson, C. K.

    2005-12-01

    The Calabrian Arc region is the final remnant of a Western Mediterranean microplate driven by rollback. Calabria itself is an exotic block that rifted off Sardinia and opened the Tyrrhenian Sea back-arc basin in its wake. The Calabrian Arc rapidly advanced to the southeast, with subduction ahead and extension behind, following subduction rollback of the Mesozoic seafloor. The subduction zone meanwhile collided progressively with the Apulia to form the Apennines in peninsular Italy and with the Africa to form the Maghrebides in Sicily. The Calabrian Arc is where the transition from subduction to continental collision is occurring. The collisions on either side of Calabria have restricted oceanic subduction to a narrow 200-km salient with well-defined edges and seismicity that extends to over 500 km depth. The collisions have also slowed, or possibly even halted, the rapid advance of the arc. Whether rollback of the oceanic lower plate of the Ionian Sea continues and whether the upper plate of Calabria continues to move as an independent plate are both uncertain. The Calabrian-Apennine-Tyrrhenian/Subduction-Collision-Accretion Network (CAT/SCAN) is a passive experiment to study of the Calabrian Arc and the transition to the southern Apennines. The land deployment consisted of three phases. The initial phase included an array of 39 broadband seismometers onshore, deployed in the winter of 2003/4. In September 2004, the array was reduced to 28 broadband and 8 short-period instruments. In April 2005, the array was reduced once again to 20 broadband and 2 short-period instruments. The field deployment was completed in October 2005. Offshore, 12 broadband Ocean Bottom Seismometers (OBSs) were deployed in the beginning of October 2004. Data from 4 OBSs have been recovered so far with deployment durations from a few weeks to almost one year. Fishing activity has been strongly implicated in the early recoveries, (with one instrument returned by fishermen), and is suspected

  4. Transient Surface Deformation of Northern Taiwan, 2007-2011, Using Persistent Scattered InSAR with ALOS Data

    NASA Astrophysics Data System (ADS)

    Wang, C.; Chang, W.; Chang, C.

    2013-12-01

    The Taipei basin, triangular in shape and located in the northern Taiwan, is now developed into the most densely populated area and also the capital of politics and economics in Taiwan. North of the Taipei basin, the Tatun volcano group was proposed to be the cause of extensional collapse during the Pleistocene following the collision between the Luzon volcanic arc and the Eurasian continental margin at about 5 Ma. We investigated the contemporary surface deformation of the northern Taiwan using ALOS images that cover the Taipei basin and its surrounding mountainous area. The Differential Interferometric Synthetic Aperture Radar (DInSAR) technique has been widely used in the past ten years. However, the mountainous areas surrounding the basin are mostly covered with densely various vegetations that reduce signal-to-noise ratio in the interferograms. Therefore, the DInSAR technique is not effective for measuring the surface deformation in and around the Taipei basin, including the Tatun volcano area, and consequently the Persistent Scatterer (PS) and small baseline (SB) InSAR techniques have been employed to extract phase signals of the chosen PS points. In this study, we aim to measure the ground deformation of northern Taiwan by processing the spaceborne radar interferometry data of ALOS acquired from 2007 to 2011 using PSInSAR and SBInSAR techniques. Compared with the Envisat and ERS images used by previous studies, L-band PALSAR images can produce more PS points in the region covered by dense vegetation so that our results reveal a higher resolution of ground deformation. The mean Line of Sight (LOS) velocity field of up to 8 mm/yr in the central Tatun volcanic area, and up to 5 mm/yr in the Taipei basin with higher rate at the hanging wall of the Sanchiao fault than the footwall. (See the Figure.) While previous studies indicated that the Taipei basin had experienced ground uplift from 1993 to 2001 and subsidence from 2003 to 2008, our results show a return to

  5. Retrodeforming the Arabia-Eurasia collision zone : Age of collision and magnitude of continental subduction

    NASA Astrophysics Data System (ADS)

    McQuarrie, N.; van Hinsbergen, D. J. J.

    2012-04-01

    When did continents collide, and how is convergence partitioned after collision are first order questions that seem to defy consensus along the Alpine-Himalyan orogen. Estimates on the age of collision for Arabia and Eurasia range from late Cretaceous to Pliocene, based on a wide variety of presumed geologic responses. Both lower Miocene synorgenic strata with growth structures adjacent to the main Zagros fault and upper Oligocene to lower Miocene overlap strata over post-collisional thrusts are derived from Eurasia and require that collision was underway at least by ~25-24 Ma. However, upper plate deformation, exhumation and sedimentation are used to argue for an older, 35 Ma collision age. Africa-North America-Eurasia plate circuit rotations, combined with Red Sea rotations provides precise estimates of the relative positions between the northern Arabian margin and the southern Eurasia margin. Plate circuits indicate, from NW to SE along the collision zone 490-650 km of post-25 Ma Arabia-Eurasia convergence and 810-1070 km since 35 Ma. To assess the consequences of these collision ages for the amount of Arabian continental subduction, we compile all documented shortening within the orogen. The Zagros fold-thrust belt consists of thrusted upper crust that was offscraped from subducted Arabian continental lithosphere. Balanced cross-sections give 105-180 km of Zagros shortening (including estimates from the Zagros proper, 45-90 km, and the Zagros "crush" zone, 60-90 km). Shortening within Eurasia is estimated to be 53-75 km through the Kopet Dagh and Alborz Mountains, plus 38 km across Central Iran. These estimates suggest that the orogen has shortened 200 to 300 km since the early Miocene. Both a 25 and a 35 Ma collision estimate thus requires that a considerable portion of the Arabian plate subducted without recognized accretion of its upper crust. To balance plate circuits and documented shortening requires whole-sale subduction of ~500-800 km of continental

  6. Numerical Elasto-Plastic Models on the Faulting development in Southwest Taiwan

    NASA Astrophysics Data System (ADS)

    Lee, F. Y.; Tan, E.; Chang, E. T. Y.

    2016-12-01

    We use 3D numerical elasto-plastic model to simulate the development of faults and the surface deformation in Southwest Taiwan, which is under oblique collision between Eurasian plate and Philippine Sea plate. The study area is bounded by the Central Range and the Peikang basement high, comprising the southernmost part of the fold-and-thrust belt joint with the coastal plain (mainly the Pingtung Plain). Our goal is to model the deformation mechanism under oblique collision of plates in and around the Taiwan Island. The Cenozoic sediment isopach is taken to form our experimental domain. The Chaochou fault locates at the eastern boundary, serving as a bulldozer moving westward in a velocity of 5 cm/yr. The Peikang high is the backstop at western boundary with material in various friction angle attached to supply friction. The northern boundary striking in E-W direction is at the northern end of the Chaochou fault as a frictional boundary. The southern boundary is in the offshore area of the Pingtung Plain with an open boundary, which allows material free to flow out. A thin layer with variable frictions is at the bottom. Our results show a significant correlation with the tectonic structures observed in the SW Taiwan. The motion velocity increases from north to south, which is similar to the GPS observation. Additionally, two longitudinal thrusts are generated at east. They correspond to the Chaochou fault and Koaping fault, the latter of which is reported as a thrust with sinistral motion. Furthermore, several sinistral strike-slip faults are emergent in the southeast in our experiment. In fact, the bathymetry in the SW offshore Taiwan reveals a lateral motion within the strata in the accretionary prism.

  7. Sunda-Banda Arc Transition: Marine Multichannel Seismic Profiling

    NASA Astrophysics Data System (ADS)

    Lueschen, E.; Mueller, C.; Kopp, H.; Djajadihardja, Y.; Ehrhardt, A.; Engels, M.; Lutz, R.; Planert, L.; Shulgin, A.; Working Group, S.

    2008-12-01

    the 4000 m deep forearc Lombok Basin offshore Bali, Lombok, and Sumbawa. The eastern termination of the Lombok Basin is formed by Sumba Island, which shows evidence for recent uplift, probably associated with the collision of the island arc with the continental Scott Plateau. The Sumba area represents the transition from subduction to collision. Our seismic profiles image the bending of the oceanic crust seaward of the trench and associated normal faulting. Landward of the trench, they image the subducting slab beneath the outer arc high, where the former bending-related normal faults appear to be reactivated as reverse faults introducing vertical displacements in the subducting slab. The accretionary prism and the outer arc high are characterized by an ocean-verging system of imbricate thrust sheets with major thrust faults connecting seafloor and detachment. Compression results in shortening and steepening of the imbricated thrust sheets building up the outer arc high. Tilted piggy-back basins and downlaps of tilted sediments in the southern Lombok forearc basin indicate ongoing uplift of the entire outer arc high, abrupt displacements, and recent tectonic activity.

  8. An alternative continence tube for continent urinary reservoirs: evaluation of surgical technique, pressure and continence study in an ex-vivo model.

    PubMed

    Honeck, Patrick; Michel, Maurice Stephan; Trojan, Lutz; Alken, Peter

    2009-02-01

    Despite the large number of surgical techniques for continent cutaneous diversion described in literature, the creation of a reliable, continent and easily catheterizable continence mechanism remains a complex surgical procedure. Aim of this study was the evaluation of a new method for a catheterizable continence mechanism using stapled pig intestine. Small and large pig intestines were used for construction. A 3 or 6 cm double row stapling system was used. Three variations using small and large intestine segments were constructed. A 3 or 6 cm long stapler line was placed alongside a 12 Fr catheter positioned at the antimesenterial side creating a partially two-luminal segment. Construction time for the tube was measured. The created tube was then embedded into the pouch. Pressure evaluation of the continence mechanism was performed for each variation. Intermittent external manual compression was used to simulate sudden pressure exposure. All variations were 100% continent under filling volumes of up to 700 ml and pressure levels of 58 +/- 6 cm H(2)O for large intestine and 266 ml and 87 +/- 18 cm H(2)O for small intestine, respectively. With further filling above the mentioned capacity suture insufficiency occurred but no tube insufficiency. Construction time for all variations was less than 12 min. The described technique is an easy and fast method to construct a continence mechanism using small or large intestine. Our ex vivo experiments have shown sufficient continence situation in an ex-vivo model. Further investigations in an in-vivo model are needed to confirm these results.

  9. Harper Creek and Cuyamaca Reservoir gneisses, CLMSZ: Late Jurassic plutons of the Peninsular Ranges batholith

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Miller, J.; Girty, G.H.; Girty, M.S.

    1993-04-01

    The Cuyamaca Laguna Mountains shear zone (CLMSZ), southern California, has been interpreted to represent east-over-west thrusting resulting from Early Cretaceous arc-continent collision. Near Pine Valley, the western margin of the CLMSZ is underlain by the Harper Creek (HCg) and Cuyamaca Reservoir (CRg) gneisses. U-Pb zircon studies indicate ages of 161 [+-] 17 Ma and 156 [+-] 12 Ma for the Hcg and an age of 158 Ma for the CRg. Geochemically the HCg and CRg are calc-alkaline and peraluminous. Trace element data suggest a magmatic arc setting. Modal and normative mineralogy suggest granodioritic and tonalitic protoliths. Mineral assemblages indicate uppermore » greenschist facies to lower amphibolite grade conditions during deformation. The HCg and CRg were deformed prior to the emplacement of the adjacent 118 [+-] 9 Ma Pine Valley pluton. Structural fabrics described above suggest NE-SW contraction and subvertical extension and are thus compatible with the arc-continent collisional model proposed by earlier workers.« less

  10. Discontinuous character of the Wadati-Benioff zone in the Banda Arc region: a consequence of a cyclic character of the process of subduction

    NASA Astrophysics Data System (ADS)

    Matejkova, R.; Spicak, A.; Vanek, J.

    2010-12-01

    200-400 km corresponds to a subduction cycle that was active 8-4 Ma BP. The remnants of related arc volcanism can be found along the Lucipara and Nieuwerkerk-Emperor of China ridges in the Banda Sea; ages of these volcanic rocks (Honthaas et al., 1998) correspond well with our estimate. This subduction cycle, still running beneath Java and Sumatra, was probably ended by collision with the Australian continent in the Banda Arc region. Such a collisional event is reflected by a vertically situated domain D3 of unusually strong seismicity concentrated at depths 100 - 200 km; the deepest part of the domain corresponds to the beginning of the collisional event 4 Ma BP. A present analogy of the collisional event can be found in the Timor region, west of the region of our interest. The domain D4 of seismicity south/southeast of the Timor-Tanimbar trough (focal depth down to 100 km) corresponds to the recent subduction of the Australian shelf beneath the Banda Arc region. This recent subduction has already reached a depth of about 100 km decisive for arc magma formation (Damar, Teon, Nila volcanoes).

  11. Contrasting sedimentary processes along a convergent margin: the Lesser Antilles arc system

    NASA Astrophysics Data System (ADS)

    Picard, Michel; Schneider, Jean-Luc; Boudon, Georges

    2006-12-01

    Sedimentation processes occurring in an active convergent setting are well illustrated in the Lesser Antilles island arc. The margin is related to westward subduction of the North and/or the South America plates beneath the Caribbean plate. From east to west, the arc can be subdivided into several tectono-sedimentary depositional domains: the accretionary prism, the fore-arc basin, the arc platform and inter-arc basin, and the Grenada back-arc basin. The Grenada back-arc basin, the fore-arc basin (Tobago Trough) and the accretionary prism on the east side of the volcanic arc constitute traps for particles derived from the arc platform and the South American continent. The arc is volcanically active, and provides large volumes of volcaniclastic sediments which accumulate mainly in the Grenada basin by volcaniclastic gravity flows (volcanic debris avalanches, debris flows, turbiditic flows) and minor amounts by fallout. By contrast, the eastern side of the margin is fed by ash fallout and minor volcaniclastic turbidites. In this area, the dominant component of the sediments is pelagic in origin, or derived from South America (siliciclastic turbidites). Insular shelves are the locations of carbonate sedimentation, such as large platforms which develop in the Limestone Caribbees in the northern part of the margin. Reworking of carbonate material by turbidity currents also delivers lesser amounts to eastern basins of the margin. This contrasting sedimentation on both sides of the arc platform along the margin is controlled by several interacting factors including basin morphology, volcanic productivity, wind and deep-sea current patterns, and sea-level changes. Basin morphology appears to be the most dominant factor. The western slopes of the arc platform are steeper than the eastern ones, thus favouring gravity flow processes.

  12. Hypothetical model for the bending of the Mariana Arc

    NASA Astrophysics Data System (ADS)

    McCabe, Robert; Uyeda, Seiya

    The southern Mariana Arc has a distinct eastward convex shape which is more pronounced than the typical arcuate structure observed above oceanic subduction zones. The Yap Trench is offset hundreds of kilometers westward from the main Izu-Bonin-Mariana trend. Between the southern Mariana Arc and the Yap Trench, the Mariana Arc has an anomalous east-west orientation and is characterized by a markedly lower seismicity than the main Mariana trend. Situated east of the Yap Trench is the ESE trending Caroline Ridge that geochemically resembles the Hawaiian hot spot trend. Paleomagnetic data from Truk and the generally increasing ages to the WNW trend of the Caroline Ridge suggest that the Caroline Ridge is part of the Pacific plate as suggested by Clague and Jarrard (1973). Pacific plate motion for the Caroline Ridge predicts that the ridge has collided with the Yap Trench during the Tertiary. Other evidence for this collision is observed on the island of Yap and by the fact that this portion of the arc has not had volcanic activity during the Neogene period. Paleomagnetic studies show that since the early Oligocene, Guam has rotated greater than 50° clockwise. During this same period, Saipan has rotated only 35° clockwise. These data, the similar bends of the west Mariana Ridge and the Mariana Ridge, and the orientation of fold axes on Guam and Saipan suggest that the clockwise rotation occurred after the initiation of spreading of the Parece Vela Basin and before the opening of the Mariana Trough. This investigation also suggests that the east-west trending portion of the Mariana Trench is a transform boundary which developed in response to the collision.

  13. Geodynamic evolution of the Sabzevar zone, northern central Iranian micro-continent

    NASA Astrophysics Data System (ADS)

    Omrani, Hadi; Moazzen, Mohssen; Oberhänsli, Roland

    2018-02-01

    The Northern Central Iranian Micro-continent (CIM) represents Neotethys-related oceanic crust remnants, emplaced due to convergence between CIM and Eurasia plates during Eocene. Mafic and ultramafic units are exposed along the northern part of the CIM in the Sabzevar area. The geology and field relation of Sabzevar ophiolite indicate northward subduction of the Sabzevar basin. The average whole rock chemistry of mafic (gabbros) and ultramafic samples (lherzolite, harzburgite and dunite) is characterized by a range of MgO of 11.16-31.88, CaO 5.22-11.53 and Al2O3 2.77-14.57, respectively. Low LREE/HREE ratio of ultramafic samples is accompanied by enrichment of large ion lithophile elements (LILE) such as Sr, Pb and K. Mafic samples show two distinct groups with low and high LREE/HREE ratios. The spider diagram of mafic samples indicates enrichment in Sr, Pb and K and depletion in REE. Petrological and geochemical evidence and field relations show that the mafic rocks formed in a supra-subduction zone setting. Petrological studies reveal the role of fractional crystallization and assimilation effect by released fluids during subduction related generation of the Sabzevar mafic rocks. We suggest that the studied mafic rocks likely represent the basement of an initial island arc, which was generated in a supra-subduction zone setting within the Neotethys branch of the Sabzevar Ocean at the north of CIM. Copper, gold and chromite mineralizations are studied in relation to island arc setting and supra-subduction environment. Similarities in lithology, ophiolite age and mineralization between Sabzevar ophiolite and Bardaskan-Torbat Heydariyeh ophiolites testify for their separation due to rotation (or faulting) of the Central Iranian Micro-continent.

  14. The global relevance of the Scotia Arc: An introduction

    NASA Astrophysics Data System (ADS)

    Maldonado, Andrés; Dalziel, Ian W. D.; Leat, Philip T.

    2015-02-01

    The Scotia Arc, situated between South America and Antarctica, is one of the Earth's most important ocean gateways and former land bridges. Understanding its structure and development is critical for the knowledge of tectonic, paleoenvironmental and biological processes in the southern oceans and Antarctica. It extends from the Drake Passage in the west, where the Shackleton Fracture Zone forms a prominent, but discontinuous, bathymetric ridge between the southern South American continent and the northern tip of the Antarctic Peninsula to the active intra-oceanic volcanic arc forming the South Sandwich Island in the east. The tectonic arc comprises the NSR to the north and to the south the South Scotia Ridge, both transcurrent plate margins that respectively include the South Georgia and South Orkney microcontinents. The Scotia and Sandwich tectonic plates form the major basin within these margins. As the basins opened, formation of first shallow sea ways and then deep ocean connections controlled the initiation and development of the Antarctic Circumpolar Current, which is widely thought to have been important in providing the climatic conditions for formation of the polar ice-sheets. The evolution of the Scotia Arc is therefore of global palaeoclimatic significance. The Scotia Arc has been the focus of increasing international research interest. Many recent studies have stressed the links and interactions between the solid Earth, oceanographic, paleoenvironmental and biological processes in the area. This special issue presents new works that summarize significant recent research results and synthesize the current state of knowledge for the Scotia Arc.

  15. Convergent tectonics in the Huon Peninsula region, Papua New Guinea

    NASA Astrophysics Data System (ADS)

    Davies, H. L.; Lock, J.; Tiffin, D. L.; Honza, E.; Okuda, Y.; Murakami, F.; Kisimoto, K.

    1987-09-01

    The anticlinal nappe which forms the Huon Peninsula and adjacent ranges extends offshore as the Huon Ridge. The frontal thrust of the nappe is the Ramu-Markham Fault (onshore) and a deformation front along the line of the Markham Canyon (offshore). The timing and geometry of the Finisterre arc-continent collision is controversial, and the origin of the Finsch Deep is unresolved.

  16. Rheology and strength of the Eurasian continental lithosphere in the foreland of the Taiwan collision belt: Constraints from seismicity, flexure, and structural styles

    NASA Astrophysics Data System (ADS)

    Mouthereau, FréDéRic; Petit, Carole

    2003-11-01

    collision and the lack of inherited features keep the lithosphere stronger. This study suggests that when the Eurasian plate enters the Taiwan collision, tectonic inheritance of the continental margin exerts a strong control on the plate deformation by modifying its strength.

  17. Accretion of the southern Banda arc to the Australian plate margin determined by Global Positioning System measurements

    NASA Astrophysics Data System (ADS)

    Genrich, Joachim F.; Bock, Yehuda; McCaffrey, Robert; Calais, Eric; Stevens, Colleen W.; Subarya, Cecep

    1996-04-01

    Global Positioning System geodetic measurements at thirteen locations in Indonesia and four in Australia reveal that the Australian continent has accreted the Banda island arc to its margin. Small relative velocities of five sites on west Java, south Kalimantan, Bali, and south Sulawesi define a rigid Sunda shelf that moves relative to northern Australia in a manner consistent with pole locations from NUVEL-1 Australia-Eurasia but at a rate that is about 7% slower. Block-like northward motion of the southern Banda arc toward the Sunda shelf at nearly the same rate as Australia suggests that the Timor trough is now inactive as a thrust. Little of the convergence of Australia with Eurasia is accommodated by strain within the Banda arc structure. Most of the convergence appears to occur as northward translation of the rigid arc with shortening on the Flores and Wetar thrusts and possibly on faults within the back arc basin.

  18. Gravity flows associated with flood events and carbon burial: Taiwan as instructional source area.

    PubMed

    Liu, James T; Kao, Shuh-Ji; Huh, Chih-An; Hung, Chin-Chang

    2013-01-01

    Taiwan's unique setting allows it to release disproportionately large quantities of fluvial sediment into diverse dispersal systems around the island. Earthquakes, lithology, topography, cyclone-induced rainfall, and human disturbance play major roles in the catchment dynamics. Deep landslides dominate the sediment-removal process on land, giving fluvial sediment distinct geochemical signals. Extreme conditions in river runoff, sediment load, nearshore waves and currents, and the formation of gravity flows during typhoon events can be observed within short distances. Segregation of fresh biomass and clastic sediment occurs during the marine transport process, yet turbidity currents in the Gaoping Submarine Canyon carry woody debris. Strong currents in the slope and back-arc basin of the Okinawa Trough disperse fine-grained sediments rapidly and widely. Temporal deposition and remobilization may occur when the shallow Taiwan Strait acts as a receptacle. Taiwan can therefore serve as a demonstration of the episodic aspect of the source-to-sink pathway to both the coastal and deep-ocean environments.

  19. Establishment of a Taiwan Marine cable hosted observatory (Ma-Cho project)

    NASA Astrophysics Data System (ADS)

    Lee, C.; Hsu, S.; Shin, T.

    2006-12-01

    Taiwan is located in a junction corner between the Philippine Sea Plate and Eurasian Plate. Because of the active convergence, numerous earthquakes have occurred in and around Taiwan. On average, there are about two earthquakes greater than magnitude 6 each year and 80% of earthquakes occurred in the offshore area. Because of the subduction of Philippine Sea Plate beneath the western end of the Ryukyu Arc and northern Taiwan, both the tectonics and seismic activity are intensive. The 2004 Sumatra earthquake has induced giant tsunami attacking coastal countries of South Asia. Due to a similar geodynamic context, the Sumatra event has aroused the attention of Taiwan government. Soon, specialists from Taiwan earth scientists and ocean engineers have teamed up to discuss the potential and mitigation of natural hazards from the western end of the Ryukyu subduction zone. The constructing a submarine cable observatory off eastern Taiwan (Ma-Cho project) was suggested. Ma-Cho means a sea goddess who protects people at sea. The purpose of Ma-Cho project has several folds. Firstly, the extension of seismic stations on land to offshore area can increase the resolution of earthquake locating. Secondly, the extension of seismic stations may obtain tens of second before the destructing seismic waves arrive on land or tens of minute before the arrival of giant tsunami, which is helpful for earthquake or tsunami warning. Thirdly, the seafloor scientific station can monitor the active volcanoes in the Okinawa Trough, which is directly adjacent to the Ilan plain in northeastern Taiwan. Fourthly, the seafloor observatory can be used to continuously study the Kurosho current, off eastern Taiwan. The Ma- Cho project has been granted for the first year. From 2007, we will start with a submarine route survey and a construction of the submarine cable land station. The main submarine cable frame and the connection of scientific instruments to cable nodes will be finished in 2009.

  20. Adria/Europe collision effects

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Balla, Z.

    1988-08-01

    In the Senonian, the Adriatic promontory of the African plate lay between two transform faults which joined the north-vergent Alpine-Carpathian front with the south-vergent Apenninic and Hellenic fronts. In the late Eocene it collided with the European continent. The head of the promontory was crushed by compression in the Oligocene and lengthened in a west-east direction. This initiated formation of the West Alpine and West Carpathian arcs. A bay of thin European crust in the area now occupied by the Carpathians facilitated a more pronounced advance of the eastern arc. A wedge-shaped body with the Bakony Mountains in its rigidmore » core was pressed out from the Alpine region. The eastern Alps and the West Carpathians as well as the Southern Alps and the middle Pannonian units suffered sinistral and dextral shear, respectively, which resulted in their lengthening and zonality. In the early-middle Miocene in the Adriatic promontory was broken up. Its northern part suffered counterclockwise rotation in connection with the opening of the Ligurian Sea while the southern part only shifted relative to Africa. Rotation of the northern microplate forced the Dinaric-Hellenic arc to change its shape from convex to concave, and the intra-Carpathian units advanced toward the northeast and rotated toward each other. This completed the Carpathian arc and initiated subsidence in the Pannonian basin. Since the late Miocene the Adriatic promontory has acted again as a part of Africa with a maximum 60-km shift toward the west, caused by the escaping Turkish microplate.« less

  1. Shear deformation in the northeastern margin of the Izu collision zone, central Japan, inferred from GPS observations

    NASA Astrophysics Data System (ADS)

    Doke, R.; Harada, M.; Miyaoka, K.; Satomura, M.

    2016-12-01

    The Izu collision zone, which is characterized by the collision between the Izu-Bonin arc (Izu Peninsula) and the Honshu arc (the main island of Japan), is located in the northernmost part of the Philippine Sea (PHS) plate. Particularly in the northeastern margin of the zone, numerous large earthquakes have occurred. To clarify the convergent tectonics of the zone related to the occurrence of these earthquakes, in this study, we performed Global Positioning System (GPS) observations and analysis around the Izu collision zone. Based on the results of mapping the steady state of the GPS velocity and strain rate fields, we verified that there has been wide shear deformation in the northeastern part of the Izu collision zone, which agrees with the maximum shear directions in the left-lateral slip of the active faults in the study area. Based on the relative motion between the western Izu Peninsula and the eastern subducting forearc, the shear zone can be considered as a transition zone affected by both collision and subduction. The Higashi-Izu Monogenic Volcano Group, which is located in the southern part of the shear deformation zone, may have formed as a result of the steady motion of the subducting PHS plate and the collision of the Izu Peninsula with the Honshu arc. The seismic activities in the Tanzawa Mountains, which is located in the northern part of the shear deformation zone, and the eastern part of the Izu Peninsula may be related to the shear deformation zone, because the temporal patterns of the seismic activity in both areas are correlated.

  2. GPS/Acoustic seafloor observation in eastern Taiwan

    NASA Astrophysics Data System (ADS)

    Chen, H. Y.; Ando, M.; Lin, C. H.

    2017-12-01

    Two sets of transponder arrays, around 100 km off-Ilan and off-Hualien, respectively, have been establisted to estimate the movement behaviors at the upper part of the subduction zone between the Philippine sea plate and Ryukyu islands arc collision boundary in eastern Taiwan since 2012 and 2014. Ten seafloor geodetic surveys have been conducted for off-Ilan array on July 2012, April, July, September 2013, September 2014, July, September 2015, June, August 2016, August 2017, and Four campaigns on September 2015, June, August 2016, August 2017 for off-Hualien array. The positioning results have been acquired on root-mean-square (rms) in 0.06 and 0.10 msec (i.e. 7 and 12 cm) of positioning accuracy. Compare the accuracy with further studies on Peru-Chile trench and Nankai Trough of Japan, the results is slight worse in 2-3 cm level. The primary velocity shows 6.0±1.2 cm to the south 7.1±2.2 cm to the west and 1.7±1.9 downward from July 2012 to August 2017 in the off-Ilan array, and 6.1±11.8 cm to the south 5.2±10.6 cm to the west and 47.0±16.0 downward from September 2015 to August 2017 in the off-Hualien array. The movement behavior of this result is similar to the onshore vectors estimated by GPS, but the uncertainty of the velocity is still slight large to determine the positions precisely. However, the accuracy has been improved by extending the experience time spend and prolonging the observation periods.

  3. Impacts of continental arcs on global carbon cycling and climate

    NASA Astrophysics Data System (ADS)

    Lee, C. T.; Jiang, H.; Carter, L.; Dasgupta, R.; Cao, W.; Lackey, J. S.; Lenardic, A.; Barnes, J.; McKenzie, R.

    2017-12-01

    On myr timescales, climatic variability is tied to variations in atmospheric CO2, which in turn is driven by geologic sources of CO2 and modulated by the efficiency of chemical weathering and carbonate precipitation (sinks). Long-term variability in CO2 has largely been attributed to changes in mid-ocean ridge inputs or the efficiency of global weathering. For example, the Cretaceous greenhouse is thought to be related to enhanced oceanic crust production, while the late Cenozoic icehouse is attributed to enhanced chemical weathering associated with the Himalayan orogeny. Here, we show that continental arcs may play a more important role in controlling climate, both in terms of sources and sinks. Continental arcs differ from island arcs and mid-ocean ridges in that the continental plate through which arc magmas pass may contain large amounts of sedimentary carbonate, accumulated over the history of the continent. Interaction of arc magmas with crustal carbonates via assimilation, reaction or heating can significantly add to the mantle-sourced CO2 flux. Detrital zircons and global mapping of basement rocks shows that the length of continental arcs in the Cretaceous was more than twice that in the mid-Cenozoic; maps also show many of these arcs intersected crustal carbonates. The increased length of continental arc magmatism coincided with increased oceanic spreading rates, placing convergent margins into compression, which favors continental arcs. Around 50 Ma, however, nearly all the continental arcs in Eurasia and North America terminated as India collided with Eurasia and the western Pacific rolled back, initiating the Marianas-Tonga-Kermadec intra-oceanic subduction complex and possibly leading to a decrease in global CO2 production. Meanwhile, extinct continental arcs continued to erode, resulting in regionally enhanced chemical weathering unsupported by magmatic fluxes of CO2. Continental arcs, during their magmatic lifetimes, are thus a source of CO2, driving

  4. Evolving Continents

    NASA Astrophysics Data System (ADS)

    Hamilton, Warren

    Brian Windley succeeds very well indeed at the formidable task he sets for himself in this greatly revised second edition of a book that first appeared in 1977. He synthesizes primarily the tectonic and petrologic evolution of the continents and secondarily their economic geologic, stratigraphic, and biologic history. The book is organized in well-balanced time sequence and topical chapters, followed by a fine overview. The author describes examples, generalizes from them, and seeks understanding of variations with time and with depth of the process acting on continents within a plate tectonic framework.

  5. Tectonic escape in the evolution of the continental crust

    NASA Technical Reports Server (NTRS)

    Burke, K.; Sengor, C.

    1986-01-01

    The continental crust originated by processes similar to those operating today and continents consist of material most of which originated long ago in arc-systems that have later been modified, especially at Andean margins and in continental collisions where crustal thickening is common. Collision-related strike-slip motion is a general process in continental evolution. Because buoyant continental (or arc) material generally moves during collision toward a nearby oceanic margin where less buoyant lithosphere crops out, the process of major strike-slip dominated motion toward a 'free-face' is called 'tectonic escape'. Tectonic escape is and has been an element in continental evolution throughout recorded earth-history. It promotes: (1) rifting and the formation of rift-basins with thinning of thickened crust; (2) pervasive strike-slip faulting late in orogenic history which breaks up mountain belts across strike and may juxtapose unrelated sectors in cross-section; (3) localized compressional mountains and related foreland-trough basins.

  6. Correlation between continent area and elevation

    NASA Astrophysics Data System (ADS)

    Zhang, Y.

    2004-12-01

    This presentation is motivated by the following questions: (1) What factors determine the mean elevation and thickness of an individual continent? (2) How to explain the positive correlation between the mean height and area of individual continent? (3) Given total continental crust volume, what determines the mean thickness (and hence total area) of all continents? For example, Mean thickness of all continents is about 41 km. Mean land elevation is 874 m, and mean elevation of all continents (including land areas and continental shelves and slopes to 1000 meters below sea level) is about 800 m. Could mean continental thickness have doubled and continental area have halved in the geologic past? I present a first-order model to address these issues assuming that continental mean height is the steady state height controlled by uplift and erosion. The model predicts that it takes longer time to erode a larger continent. Hence mean continental height at steady state increases as continental area increases. This prediction is consistent with the general trend between present-day continental elevation and area (except for Antarctica), and can fit the trend well. This is the first time the relation between continental area and mean elevation is quantitatively explained. The model is further applied to investigate variations of mean thickness of continental crust over the last 600 Myr over which the continental crust mass and seawater volume are assumed to be constant. Because a change in the number of continents leads to change in the area of continents, it is predicted that the mean continental thickness increases as the number of continents decreases. Nevertheless, the thickness variation is small, amounts to about 10% from one continent to six continents. Change in the number of continents leads to a sea level fluctuation of about 0.3 km, with the lowest sea level coinciding with times of supercontinents. This prediction is consistent with prominent lows in sea level

  7. Two mantle domains and the time scales of fluid transfer beneath the Vanuatu arc

    NASA Astrophysics Data System (ADS)

    Turner, Simon P.; Peate, David W.; Hawkesworth, Chris J.; Eggins, Stephen M.; Crawford, Anthony J.

    1999-11-01

    U-Th isotope disequilibria can provide constraints on the time elapsed since fluid addition to the mantle wedge beneath island arcs. The Vanuatu arc offers new insights into these processes because Pb isotopes there are not dominated by components from the subducting plate and so preserve the signatures of the mantle wedge. The Pb isotope data document the presence of separate Pacific and Indian mantle domains beneath the arc volcanoes. The Indian mantle was brought beneath the central part of the arc from the backarc by collision with the D'Entrecasteaux Ridge, resulting in a slowing of subduction there. The distinction in the mantle wedge composition is also uniquely apparent in U-Th isotope data, which define two subparallel arrays on the U-Th equiline diagram, one anchored to high U/Th Pacific mantle and the other to lower U/Th Indian mantle. These data provide clear evidence of the effects of variable mantle composition on U-Th isotope disequilibria. We argue that such arrays faithfully record the time elapsed since fluid release from the subducting plate. The data indicate that this occurred ca. 16 ka in the area of collision and slow subduction, but ca. 60 ka where the rate of subduction is substantially faster. This suggests a link between the rate of subduction and the time elapsed since fluid release.

  8. Simulation of tectonic evolution of the Kanto Basin of Japan since 1 Ma due to subduction of the Pacific and Philippine Sea plates and the collision of the Izu-Bonin arc

    NASA Astrophysics Data System (ADS)

    Hashima, Akinori; Sato, Toshinori; Sato, Hiroshi; Asao, Kazumi; Furuya, Hiroshi; Yamamoto, Shuji; Kameo, Koji; Miyauchi, Takahiro; Ito, Tanio; Tsumura, Noriko; Kaneda, Heitaro

    2016-06-01

    The Kanto Basin, the largest lowland in Japan, developed by flexure as a result of (1) the subduction of the Philippine Sea (PHS) and the Pacific (PAC) plates and (2) the repeated collision of the Izu-Bonin arc fragments with the Japanese island arc. Geomorphological, geological, and thermochronological data on vertical movements over the last 1 My suggest that subsidence initially affected the entire basin after which the area of subsidence gradually narrowed until, finally, the basin began to experience uplift. In this study, we modeled the tectonic evolution of the Kanto Basin following the method of Matsu'ura and Sato (1989) for a kinematic subduction model with dislocations, in order to quantitatively assess the effects of PHS and PAC subduction. We include the steady slip-rate deficit (permanent locking rate at the plate interface) in our model to account for collision process. We explore how the latest collision of the Izu Peninsula block has been affected by a westerly shift in the PHS plate motion vector with respect to the Eurasian plate, thought to have occurred between 1.0-0.5 Ma, using long-term vertical deformation data to constrain extent of the locked zone on the plate interface. We evaluated the change in vertical deformation rate for two scenarios: (1) a synchronous shift in the orientation of the locked zone as PHS plate motion shifts and (2) a delayed shift in the orientation of the locked zone following the shift in plate motion. Observed changes in the uplift/subsidence pattern are better explained by scenario (2), suggesting that recent (< 1 My) deformation in the Kanto Basin shows a lag in crustal response to the plate motion shift. We also calculated stress accumulation rates and found a good match with observed earthquake mechanisms, which shows that intraplate earthquakes serve to release stress accumulated through long-term plate interactions.

  9. Propagation of back-arc extension in the arc of the southern New Hebrides Subduction Zone (South West Pacific) and possible relation to subduction initiation.

    NASA Astrophysics Data System (ADS)

    Fabre, M.; Patriat, M.; Collot, J.; Danyushevsky, L. V.; Meffre, S.; Falloon, T.; Rouillard, P.; Pelletier, B.; Roach, M. J.; Fournier, M.

    2015-12-01

    Geophysical data acquired during three expeditions of the R/V Southern Surveyor allows us to characterize the deformation of the upper plate at the southern termination of the New Hebrides subduction zone where it bends 90° eastward along the Hunter Ridge. As shown by GPS measurements and earthquake slip vectors systematically orthogonal to the trench, this 90° bend does not mark a transition from subduction to strike slip as usually observed at subduction termination. Here the convergence direction remains continuously orthogonal to the trench notwithstanding its bend. Multibeam bathymetric data acquired in the North Fiji Basin reveals active deformation and fragmentation of the upper plate. It shows the southward propagation of a N-S back-arc spreading ridge into the pre-existing volcanic arc, and the connection of the southern end of the spreading axis with an oblique active rift in the active arc. Ultimately the active arc lithosphere is sheared as spreading progressively supersedes rifting. Consequently to such incursion of back-arc basin extension into the arc, peeled off and drifted pieces of arc crust are progressively isolated into the back-arc basin. Another consequence is that the New Hebrides arc is split in two distinct microplates, which move independently relative to the lower plate, and thereby define two different subduction systems. We suggest arc fragmentation could be a consequence of the incipient collision of the Loyalty Ridge with the New Hebrides Arc. We further speculate that this kinematic change could have resulted, less than two million year ago, in the initiation of a new subduction orthogonal to the New Hebrides Subduction possibly along the paleo STEP fault. In this geodynamic setting, with an oceanic lithosphere subducting beneath a sheared volcanic arc, a particularly wide range of primitive subduction-related magmas have been produced including adakites, island arc tholeiites, back-arc basin basalts, and medium-K subduction

  10. Future accreted terranes: a compilation of island arcs, oceanic plateaus, submarine ridges, seamounts, and continental fragments

    NASA Astrophysics Data System (ADS)

    Tetreault, J. L.; Buiter, S. J. H.

    2014-07-01

    Allochthonous accreted terranes are exotic geologic units that originated from anomalous crustal regions on a subducting oceanic plate and were transferred to the overriding plate during subduction by accretionary processes. The geographical regions that eventually become accreted allochthonous terranes include island arcs, oceanic plateaus, submarine ridges, seamounts, continental fragments, and microcontinents. These future allochthonous terranes (FATs) contribute to continental crustal growth, subduction dynamics, and crustal recycling in the mantle. We present a review of modern FATs and their accreted counterparts based on available geological, seismic, and gravity studies and discuss their crustal structure, geological origin, and bulk crustal density. Island arcs have an average crustal thickness of 26 km, average bulk crustal density of 2.79 g cm-3, and have 3 distinct crustal units overlying a crust-mantle transition zone. Oceanic plateaus and submarine ridges have an average crustal thickness of 21 km and average bulk crustal density of 2.84 g cm-3. Continental fragments presently on the ocean floor have an average crustal thickness of 25 km and bulk crustal density of 2.81 g cm-3. Accreted allochthonous terranes can be compared to these crustal compilations to better understand which units of crust are accreted or subducted. In general, most accreted terranes are thin crustal units sheared off of FATs and added onto the accretionary prism, with thicknesses on the order of hundreds of meters to a few kilometers. In addition many island arcs, oceanic plateaus, and submarine ridges were sheared off in the subduction interface and underplated onto the overlying continent. And other times we find evidence of collision leaving behind accreted terranes 25 to 40 km thick. We posit that rheologically weak crustal layers or shear zones that were formed when the FATs were produced can be activated as detachments during subduction, allowing parts of the FAT crust to

  11. Continent cutaneous diversion.

    PubMed

    Skinner, Eila C

    2015-11-01

    This article updates the recently reported intermediate to long-term results with the most commonly used forms of continent cutaneous urinary diversion, and to discuss approaches to early and late complications. Many variations on construction of a continent cutaneous diversion have been described. Results with large series of patients demonstrate acceptable results with all of them, but with a significant revision rate. Long-term complication rates and adaptation to robotic approaches have recently been described. Continent cutaneous diversion is rarely offered in the USA to patients undergoing cystectomy except in a few centers. Most studies have found a high complication rate and need for revision surgery in 10-20% of patients. However, functional results are acceptable and many patients are willing to accept the complications in exchange for avoiding an external appliance.

  12. Analytical formulation of impulsive collision avoidance dynamics

    NASA Astrophysics Data System (ADS)

    Bombardelli, Claudio

    2014-02-01

    The paper deals with the problem of impulsive collision avoidance between two colliding objects in three dimensions and assuming elliptical Keplerian orbits. Closed-form analytical expressions are provided that accurately predict the relative dynamics of the two bodies in the encounter b-plane following an impulsive delta-V manoeuvre performed by one object at a given orbit location prior to the impact and with a generic three-dimensional orientation. After verifying the accuracy of the analytical expressions for different orbital eccentricities and encounter geometries the manoeuvre direction that maximises the miss distance is obtained numerically as a function of the arc length separation between the manoeuvre point and the predicted collision point. The provided formulas can be used for high-accuracy instantaneous estimation of the outcome of a generic impulsive collision avoidance manoeuvre and its optimisation.

  13. Impact and implications of the Afro-Eurasian collision south of Cyprus from reflection seismic data

    NASA Astrophysics Data System (ADS)

    Klimke, Jennifer; Ehrhardt, Axel

    2014-06-01

    The Cyprus Arc in the Eastern Mediterranean represents the active collision front between the African and Eurasian (Anatolian) Plates. Along the Cyprus Arc, the Eratosthenes Seamount is believed to have been blocking the northward motion of the African Plate since the Late Pliocene-Early Pleistocene. Based on a dense grid of 2D reflection seismic profiles covering the Eratosthenes Seamount and western Levant Basin offshore Cyprus, new observations regarding the Cyprus Arc collision front at the triple transition zone Eratosthenes Seamount-Levant Basin-Hecataeus Rise are presented. The data show that the Levant Basin is filled with ~ 10 km of sediments of Early Mesozoic (probably Jurassic) to Plio-Quaternary age with only a localized deformation affecting the Miocene-Oligocene rock units. The sediments onlap directly against the steep eastern flank of the Eratosthenes Seamount to the west and the southern flank of the Hecataeus Rise to the north. The sediments show no deformation that could be associated with collision and are undeformed even very close to the two prominent structures. Pinching out of the Base Miocene reflector in the Levant Basin due to onlapping of the Middle Miocene reflector indicates uplift of the Eratosthenes Seamount and the Hecataeus Rise. In contrast to the Messinian Evaporites north of the Eratosthenes Seamount, the salt in the Levant Basin, even close to the Hecataeus Rise, is tectonically undeformed. It is proposed that the Eratosthenes Seamount, the western Levant Basin and the Hecataeus Rise act as one tectonic unit. This implies that the collision front is located north of this unit and that the Hecataeus Rise shields the sediments south of it from deformation associated with collision of the African and Anatolian Plates.

  14. Late Cretaceous-Early Eocene Climate Change Linked to Tectonic Eevolution of Neo-Tethyan Subduction Systems

    NASA Astrophysics Data System (ADS)

    Jagoutz, O. E.; Royden, L.; Macdonald, F. A.

    2015-12-01

    In this presentation we demonstrate that the two tectonic events in the late Cretaceous-Early Tertiary triggered the two distinct cooling events that followed the Cretaceous Thermal Maximum (CTM). During much of the Cretaceous time, the northern Neo Tethyan ocean was dominated by two east-west striking subduction system. Subduction underneath Eurasia formed a continental arc on the southern margin of Eurasia and intra oceanic subduction in the equatorial region of the Neo Tethys formed and intra oceanic arc. Beginning at ~85-90 Ma the western part of the TTSS collided southward with the Afro-Arabian continental margin, terminating subduction. This resulted in southward obduction of the peri-Arabian ophiolite belt, which extends for ~4000 km along strike and includes the Cypus, Semail and Zagros ophiolites. At the same time also the eastern part of the TTS collided northwards wit Eurasia. After this collisional event, only the central part of the subduction system remained active until it collided with the northern margin of the Indian continent at ~50-55 Ma. The collision of the arc with the Indian margin, over a length of ~3000 km, also resulted in the obduction of arc material and ophiolitic rocks. Remnants of these rocks are preserved today as the Kohistan-Ladakh arc and ophiolites of the Indus-Tsangpo suture zone of the Himalayas. Both of these collision events occurred in the equatorial region, near or within the ITCZ, where chemical weathering rates are high and are contemporaneous with the onset of the global cooling events that mark the end of the CTM and the EECO. The tectonic collision events resulted in a shut down of subduction zone magmatism, a major CO2 source and emplacement of highly weatherable basaltic rocks within the ITCZ (CO2 sink). In order to explore the effect of the events in the TTSS on atmospheric CO2, we model the potential contribution of subduction zone volcanism (source) and ophiolite obduction (sink) to the global atmospheric CO2

  15. Tracing erosion patterns in Taiwan by quantitative provenance and geomorphological analysis

    NASA Astrophysics Data System (ADS)

    Resentini, Alberto; Goren, Liran; Castelltort, Sebastien; Garzanti, Eduardo

    2016-04-01

    Taiwan is one of the world's foremost natural laboratories for studies of orogenesis. After only a few Ma of ongoing collision between the Chinese continental margin and the Luzon Arc, the associated orogen has reached nearly 4 km in height and 100-150 km in width. High rates of convergence leading to rapid rock uplift combine with the wet stormy climate of the sub-tropical typhoon belt to deliver annually an average detrital mass of 9500 t/km2. The doubly-vergent thrust belt is composed of more than 85% of sedimentary rocks dominant in the pro-wedge, but metamorphic rocks as young as < 10 Ma are exposed in the retro-wedge, where zircon fission-track, apatite fission-track and (U-Th)/He ages are all reset and as young as 1 Ma or younger, indicating very recent fast exhumation. There is hardly another region where rock-uplift, unroofing and sediment production are of equal intensity. Quantitative analyses of tectonic and erosional processes around Taiwan have been carried out following diverse independent ways, including estimates of fluvial discharge of suspended solids, thermochronological techniques, cosmogenic measurements, and morphometry of river profiles (Dadson et al., 2003; Willett et al., 2003; Fox et al., 2014). Also the appearance and relative abundance of diagnostic rock fragments and other detrital minerals in Plio-Pleistocene sedimentary successions has been used to constrain unroofing rates, but a systematic description of compositional signatures of sediments shed by distinct tectonic domains has not been carried out so far. In this study we combine high-resolution petrographic and heavy-mineral analyses of modern sands carried by rivers all around Taiwan with their estimated sediment loads to calculate the detrital volumes generated from different lithologic assemblages within the orogen. River sediments are potent integrators of information that efficiently mediate provenance signals from different parts of the entire watershed, thus offering a

  16. Pb-isotopic compositions of volcanic rocks in the West and East Philippine island arcs: presence of the Dupal isotopic anomaly

    NASA Astrophysics Data System (ADS)

    Mukasa, Samuel B.; McCabe, Robert; Gill, James B.

    1987-07-01

    The Philippine islands are situated between two oppositely dipping zones of seismicity. With the exception of a few areas, such as in the west central Philippines where the North Palawan continental terrane (NPCT) has collided with the archipelago, these seismic zones are well defined to depths of 200 km. Active volcanic chains overlay segments in each of these zones, suggesting that subduction is presently taking place both east and west of the islands. Lavas we have studied are thus divided between what has been termed the West Philippine arc and the East Philippine arc. West Philippine arc volcanic rocks which were extruded before the Philippine archipelago collided with the NPCT, or which are younger than the collision but crop out hundreds of kilometers from the collision zone, and all but one of the rocks from the East Philippine arc fall in the MORB field on 207Pb/ 204Pb versus 206Pb/ 204Pb covariation diagrams. This is surprising considering the frequency with which arc materials have 207Pb/ 204Pb ratios higher than those of MORB, the highBa/REE and Sr/REE ratios in the lavas and the possibility of sediment subduction given the small accretionary prisms. All of these rocks have high 208Pb/ 204Pb ratios with respect to Pacific and Atlantic Ocean MORB, but are similar to Indian Ocean MORB and IOB. Thus the Philippines consist of island arcs with the peculiar Dupal isotopic anomaly documented between 0° and 60°S in the southern hemisphere and particularly in the Indian Ocean region. This demonstrates that the Dupal isotopic anomaly is not restricted to the southern hemisphere, or to MORB and OIB. Post-collision rocks cropping out near the NPCT, in the West Philippine arc, have elevated 208Pb/ 204Pb and 207Pb/ 204Pb ratios that could be attributed to assimilation of the newly introduced continental crust (NPCT) by mantle-derived magmas or to the addition of a sedimentary component to mantle-derived magmas.

  17. A regional seismic stress field in Taiwan inferred from damped inversion of earthquake focal mechanisms

    NASA Astrophysics Data System (ADS)

    Huang, P. H.; Liang, W. T.; Huang, Y. L.; Li, W. H.; Jian, P. R.; Tseng, T. L.

    2016-12-01

    We have inverted 3014 source mechanisms by applying a newly developed multiple solution method (AutoBATS) to the Broadband Array in Taiwan for Seismology (BATS) for earthquakes occurred in the Taiwan region between 1996 and 2016. To evaluate the solution reliability, we have compared our solutions with the GlobalCMT (GCMT) ones that are in common. The result shows that 83% of the Kagan angles are smaller than 35°, which is much higher than the regular BATS CMT solution and therefore indicates a good agreement among these two catalogs. In average, the Mw derived from our method is about 0.1 smaller than that obtained by the GCMT. According to the classification by Frohlich (1992), 43% of our solutions show thrusting, which is the dominant faulting type occurred mainly along the subduction zone, the eastern collision zone and the western foothill zone. A regional seismic stress field has been pursued by using a damped stress inversion algorithm over a grid whose node spacing is 0.1°. The s1 orientation is parallel to the plate motion direction of the Philippine Sea plate with respect to the Eurasian plate in the eastern offshore area. A fan-shape s1 orientation is clearly found in the western Taiwan. Across the southern Taiwan, we observed an S-shape trajectory of the s1 orientation, which may reflect the rheology contrast between the Central Range and the Pingtung Plain. In addition, we noticed that there is a singularity point of the s1 orientation at 24.3°N along the eastern coast, which may mark the transition from the effective collision to the lateral bending in the upper seismogenic layer of the crust. The inter-seismic surface GPS deformation also presents this singularity. In the north-east of this location, the s1 orientation is subparallel to the strike of the Okinawa Trough, which is almost perpendicular to the relative plate motion direction. This newly obtained CMT catalog may help decipher more sophisticated seismotectonic features in the Taiwan

  18. The anomalous amplification of M2 tide in the Taiwan Strait

    NASA Astrophysics Data System (ADS)

    Jan, Sen; Chern, Ching-Sheng; Wang, Joe; Chao, Shenn-Yu

    2004-04-01

    The complex tidal wave propagation pattern in the Taiwan Strait invites parochialism. Along the eastern (Taiwan) boundary of the strait, the anomalous amplification of M2 tide in the middle often led to the parochial view that two tidal waves coming from both ends of the strait collide in the middle, creating wave resonance. Along the western (China) boundary, one sees a southward progressive tidal wave and hence no wave collision. To reconcile, we examine a few solutions of a numerical tidal model below. Both realistic bottom bathymetry and idealized bottom topographies are used to identify dominant mechanism leading to the complex tidal wave propagation. Our process of elimination identifies the wave reflection of southward propagating tidal wave by the deep trench in the southern strait as the true cause responsible for the complex wave propagation pattern.

  19. Ivrea mantle wedge and arc of the Western Alps (II): Kinematic evolution of the Alps-Apennines orogenic system

    NASA Astrophysics Data System (ADS)

    Schmid, Stefan; Kissling, Eduard; van Hinsbergen, Douwe J. J.; Molli, Giancarlo

    2017-04-01

    lateral transition from continent-continent collision in the Central and Eastern Alps to intra-oceanic subduction in the Western Alps during Alpine orogeny, leaving large parts of the Piemont-Liguria Ocean that belong to the Adria microplate open until about 25 Ma. It is these parts that from now on formed the highest tectonic units in the Apennines, namely the Ligurides. However, internal units of the Northern Apennines previously suffered Alpine-type shortening associated with an E-dipping Alpine subduction zone. They became " backthrusted" to the NE during Apenninic orogeny commencing in the Late Oligocene. Apenninic orogeny is associated with a change in subduction polarity from Alpine E-directed subduction, previously affecting the Internal Ligurides and other parts of the Northern Apennines, towards NW-directed subduction and roll back of the Adria slab beneath Northern Apennines, pulled by the negative buoyancy of those parts of the old oceanic lithosphere of the Piemont-Liguria Ocean that remained unaffected by Alpine orogeny. Reference: Edi Kissling, Stefan M. Schmid, Tobias Diehl (2017). Ivrea mantle wedge and arc of the Western Alps (1): Geophysical evidence for the deep structure. Abstract Volume EGU 2017.

  20. BOLIVAR: the Caribbean-South America plate boundary between 60W and 71W as imaged by seismic reflection data

    NASA Astrophysics Data System (ADS)

    Magnani, M.; Mann, P.; Clark, S. A.; Escalona, A.; Zelt, C. A.; Christeson, G. L.; Levander, A.

    2007-12-01

    We present the results of ~6000km of marine multi-channel seismic (MCS) reflection data collected offshore Venezuela as part of the Broadband Ocean Land Investigation of Venezuela and the Antilles arc Region project (BOLIVAR). The imaged area spans almost 12 degrees of longitude and 5 degrees of latitude and encompasses the diffuse plate boundary between South America (SA) and the SE Caribbean plate (CAR). This plate boundary has been evolving for at least the past 55My when the volcanic island arc that borders the CAR plate started colliding obliquely with the SA continent: the collision front has migrated from west to east. BOLIVAR MCS data show that the crustal architecture of the present plate boundary is dominated by the eastward motion of the Caribbean plate with respect to SA and is characterized by a complex combination of convergent and strike-slip tectonics. To the north, the reflection data image the South Caribbean Deformed Belt (SCDB) and the structures related to the thrusting of the CAR plate under the Leeward Antilles volcanic arc region. The data show that the CAR underthrusting continues as far east as the southern edge of the Aves ridge and detailed stratigraphic dating of the Venezuela basin and trench deposits suggests that the collision began in the Paleogene. The amount of shortening along the SCDB decreases toward the east, in part due to the geometry of plate motion vectors and in part as a result of the NNE escape of the Maracaibo block in western Venezuela. South of the SCDB the MCS profiles cross the Leeward Antilles island arc and Cenozoic sedimentary basins, revealing a complex history of Paleogene-Neogene multiphase extension, compression, and tectonic inversion, as well as the influence of the tectonic activity along the right-lateral El Pilar - San Sebastian fault system. East of the Bonaire basin the MCS data image the southern end of the Aves Ridge abandoned volcanic island arc and the southwestern termination of the Grenada basin

  1. Characteristics of Broadband Seismic Noise in Taiwan and Neighboring Islands

    NASA Astrophysics Data System (ADS)

    Chen, Ching-Wei; Rau, Ruey-Juin

    2017-04-01

    We used seismic waveform data from 115 broad-band stations of BATS (Institute of Earth Science, Academia Sinica) and Central Weather Bureau Seismic Network from 2012 to 2016 for noise-level mapping in Taiwan and neighboring islands. We computed Power Spectral Density (PSD) for each station and analyzed long-term variance of microseism energy and polarizations of noise for severe weather events. The island of Taiwan is surrounded by ocean and the Central Range which has the highest peak Jade Mountain at 3,952 meters height occupies more than 66% of the island and departs it into the east and west coasts. The geographic settings then result in the high population density in the western plain and northern Taiwan. The dominant noise source in the microseism band (periods from 4-20 seconds) is the coupling between the near-coast ocean and sea floor which produces the high noise of averaging -130 dB along the west coastal area. In the eastern volcanic-arc coastal areas, the noise level is about 7% smaller than the west coast due to its deeper offshore water depth. As for the shorter periods (0.1-0.25 seconds) band, the so-called culture noise, an anthropic activity variance with the highest -103 dB can be identified in the metropolitan areas, such as the Taipei city and the noise level in the Central Range area is averaging -138 dB. Moreover, the noise also shows a daily and temporal evolution mainly related to the traffic effect. Furthermore, we determined the noise level for the entire island of Taiwan during 26-28 September, 2016, when the typhoon Megi hit the island and retrieved the enhancement of secondary microseism energy for each stations. Typhoon Megi landed in eastern and central Taiwan and reached the maximum wind speed of 45m/s in the surrounded eyewall. The Central Range, as a barrier, decreased the wind speed in southern Taiwan making an enhancement less than 10 dB, while in northern Taiwan where the direction the typhoon headed to, can reach more than 35

  2. Intraplate mountain building in response to continent continent collision—the Ancestral Rocky Mountains (North America) and inferences drawn from the Tien Shan (Central Asia)

    NASA Astrophysics Data System (ADS)

    Dickerson, Patricia Wood

    2003-04-01

    The intraplate Ancestral Rocky Mountains of western North America extend from British Columbia, Canada, to Chihuahua, Mexico, and formed during Early Carboniferous through Early Permian time in response to continent-continent collision of Laurentia with Gondwana—the conjoined masses of Africa and South America, including Yucatán and Florida. Uplifts and flanking basins also formed within the Laurentian Midcontinent. On the Gondwanan continent, well inboard from the marginal fold belts, a counterpart structural array developed during the same period. Intraplate deformation began when full collisional plate coupling had been achieved along the continental margin; the intervening ocean had been closed and subduction had ceased—that is, the distinction between upper versus lower plates became moot. Ancestral Rockies deformation was not accompanied by volcanism. Basement shear zones that formed during Mesoproterozoic rifting of Laurentia were reactivated and exerted significant control on the locations, orientations, and modes of displacement on late Paleozoic faults. Ancestral Rocky Mountain uplifts extend as far south as Chihuahua and west Texas (28° to 33°N, 102° to 109°W) and include the Florida-Moyotes, Placer de Guadalupe-Carrizalillo, Ojinaga-Tascotal and Hueco Mountain blocks, as well as the Diablo and Central Basin Platforms. All are cored with Laurentian Proterozoic crystalline basement rocks and host correlative Paleozoic stratigraphic successions. Pre-late Paleozoic deformational, thermal, and metamorphic histories are similar as well. Southern Ancestral Rocky Mountain structures terminate along a line that trends approximately N 40°E (present coordinates), a common orientation for Mesoproterozoic extensional structures throughout southern to central North America. Continuing Tien Shan intraplate deformation (Central Asia) has created an analogous array of uplifts and basins in response to the collision of India with Eurasia, beginning in late

  3. Mélange versus forearc contributions to sedimentation and uplift, during rapid denudation of a young Banda forearc-continent collisional belt

    NASA Astrophysics Data System (ADS)

    Duffy, Brendan; Kalansky, Julie; Bassett, Kari; Harris, Ron; Quigley, Mark; van Hinsbergen, Douwe J. J.; Strachan, Lorna J.; Rosenthal, Yair

    2017-05-01

    New sedimentary geochemistry and petrographic analyses provide the most extensive sedimentary documentation yet of the rapid denudation of the young Timor orogen. The data from three basins including two widely-separated, well-dated sections of the Synorogenic Megasequence of Timor-Leste, and a re-dated DSDP 262, constrain the source and timing of detrital sediment flux during forearc-continent collision along the Timor sector of the Banda Arc. The exhumed synorogenic piggy-back basins formed above a mélange unit that developed at the expense of a weak stratigraphic horizon in the Mesozoic stratigraphy, and was exhumed to the sea floor in latest Messinian time. Following an interval of deep marine chalky marl sedimentation, an increasingly muddy sediment flux indicates that the island of Timor became emergent and shed sediment by 4.5 Ma. Comparison of exhumed sections with similar patterns in the DSDP262 chemistry suggests that the sediment source was probably located some 50-60 km distant from the basin, which is consistent with the Aileu region of Timor-Leste that shows an appropriate exhumation history. All sedimentation between 4.5 and 3.2 Ma was probably derived from a low-relief, rapidly eroding, and mudstone-dominated landscape with geochemical affinities to the Triassic-mudstone-derived synorogenic mélange. The mélange unit overlies and surrounds the Banda Terrane, and was presumably structurally emplaced by propagation of a decollement through the Triassic rocks during the collision. After 3.2 Ma, sedimentation was dominated by hard rock lithologies of the Banda Terrane, consisting of forearc cover and basement, the latter including elements of metamafic rocks and metapelites. This phase of sedimentation was accompanied by rapid uplift, which may have been partly driven by a transient imbalance between rock uplift and denudation as resistant lithologies emerged from below mélange-like mudstone. Previous work has suggested that the timing of collision

  4. The relationship between continental collision process and metamorphic pattern in the Himalayan collision belts

    NASA Astrophysics Data System (ADS)

    Oh, Chang-Whan

    2015-04-01

    east indicating propagation of collision towards east. The following collision model of the Himalayan collision belt is proposed based on data published in previous studies. Collision between the Indian and Asian blocks started in the west before ca. 55 Ma. In the western part, the amount of oceanic slab subducted prior to continent collision was enough to pull the continental crust down to the depths of UHP metamorphism, as a wide ocean existed between the Asian and Indian blocks prior to collision. Following UHP metamorphism, oceanic slab break-off started at ca. 55~46 Ma in the west due to the very strong buoyancy of the deeply subducted continental block. In contrast, the subduction of continental crust continued at this time in the middle and eastern parts of the belt. The zone of break-off migrated eastward, initiating a change from steep- to low-angle subduction. Final break-off may have occurred in the easternmost part of the belt at ca. 22-25 Ma. The depth of slab break-off decreased toward the east due to the westward decrease of the amount of subducted oceanic crust along the Himalayan collision belt, resulting eastwards decrease of an uplifting rate due to a decrease in buoyancy of the continental slab. The slower uplift resulted in a longer period of thermal relaxation and a higher geothermal gradient. In the west, the high rate of uplift resulted the epidote amphibolite facies (580-610°C) retrograde metamorphic overprint on the UHP eclogites, whereas the relatively slow uplift in the mid-eastern part caused high-grade granulites (850°C) retrograde metamorphic overprint on the HP eclogites. The study indicates that the metamorphic pattern along the collision belt is strongly related to the amount of subducted oceanic crust between continents before collision and the depth of slab break-off. Therefore metamorphic pattern can be used to interpret both the disappeared and ongoing tectonic process during continental collision.

  5. Provenance of Late Ordovician Sandstones along the southeastern Appalachian Mountains: Implications for the Tectonic Model of the Taconic Orogeny

    NASA Astrophysics Data System (ADS)

    Guerrero, J. C.; Herrmann, A. D.; Haynes, J.

    2017-12-01

    A provenance study of sandstones along the southeastern Appalachian Mountains has been conducted in order to test the current volcanic arc-continent collision and foreland basin formation model of the Taconic Orogeny. Samples along the southeastern Appalachians were taken from sandstone sequences deposited between 460-450 Ma. Results from these sandstones show three dominate age ranges: 465-685 Ma, 980-1300 Ma, and 1300-1500 Ma. The 980-1300 Ma and 1300-1500 Ma ages are seen throughout the study area and are compatible with previously reported ages of the Grenville Orogeny and the Rhyolite-Granite Province. The northernmost samples have a small quantity of 465-685 Ma zircons which is attributed to an accretionary wedge that formed as a result of the continent-island arc collision and acted as a physical barrier keeping sediment from depositing within the basin. The younger age signal becomes stronger to the south, as samples in Georgia and Alabama show strong concentrations of 465-685 zircons. These ages are attributed to exotic terranes (Dalhonega Terrane and Carolina Terrane) that were accreted onto Laurentia during the Taconic Orogeny and/or a possible change in subduction direction leading to a back-arc basin model for the southern Appalachian Taconic Orogeny. The results from this provenance analysis support previous studies indicating that the model for the Taconic Orogeny is a combined A-type subduction for the north and a B-type subduction model for the southern part of the orogeny.

  6. The Diversity and Evolution of Different type Granitoids in Eastern Dharwar Craton: Evidence from "Arc-Plume" Collision in Neoarchaean

    NASA Astrophysics Data System (ADS)

    Nandy, J.; Dey, S.

    2017-12-01

    Neoarchaean crustal growth, role of plate tectonics and potential secular changes is still disoriented in Dharwar craton. To provide constraints on these questions, geochronological and geochemical data are presented on the unstudied granitoids associated with Kadiri greenstone belt, eastern Dharwar craton. Five diverse type of granitoids suites are identified in that area. Field setting, petrography, whole rock geochemistry study with Sm-Nd isotopes and zircon dates help to identify their source and petrogenesis. Along the eastern margin of the Kadiri belt a sanukitoid-like granitoid body is exposed which was probably derived from a metasomatised mantle wedge above a subduction zone followed by some older crustal contamination. Along the western margin transitional TTG is exposed displaying an intrusive relation with Kadiri dacite-rhyolite. This suite is interpreted to be derived from a mafic source with some enriched crustal component. Further east and west vast area is occupied highly silicic biotite monzogranite which is enriched in LILE, high K2O/Na2O. These granitoids are product of intracrustal shallow melting. At the south-eastern tip of the Kadiri belt occurs a well-foliated and banded transitional TTG which was probably derived from melting of mafic source with some contribution of felsic crustal material. At the north-eastern tip of the belt a highly silicic ferroan granitoid is exposed. Geochemical characteristics indicate that it is A-type granite, produced from shallow melting of a felsic crustal source. The basalt in greenstone belt is generated in oceanic plateau setting and granitoids in arc setting in different time. A tectonic scenario envisaging collision between an arc and oceanic plateau followed by repeated slab break-off and crustal recycling is proposed to explain the evolution of the terrain.

  7. [Continent ileostomy--indication and possibilities].

    PubMed

    Hahnloser, P; Säuberli, H; Geroulanos, S; Schauwecker, H H; Kock, N G

    1975-06-21

    Proctocolectomy with conventional ileostomy cures patients with severe ulcerative colitis but ileostomy appliances must be worn for the rest of their lives. The continent ileostomy, as devised by Kock, provides the patient with an intraabdominal ileal reservoir and a valve constructed by invaginating the efferent ileal segment into the reservoir. The patient empties his reservoir 2-3 times a day by inserting a catheter through the valve. Our experience with 14 patients is reported. The continent ileostomy was in most cases constructed as a second procedure after proctocolectomy. Minor postoperative complications, such as abscess, fistula or partial luxation of the valve were easily corrected. One patient who underwent proctocolectomy and simultaneous construction of a continent ileostomy died in acute liver failure due to a severe preexisting cirrhosis. All the other patients are continent for feces and gas and do not need external appliances. The construction of a continent ileostomy as a secondary procedure can be recommended in patients with proctocolectomy. It offers patients a life situation with differs only insignificantly from that of normal persons.

  8. Arc Voltage Between Deion Grid Affected by Division of Arc in Magnetic Driven Arc

    NASA Astrophysics Data System (ADS)

    Inuzuka, Yutaro; Yamato, Takashi; Yamamoto, Shinji; Iwao, Toru

    2016-10-01

    Magnetic driven arc has been applied to DC breaker and fault current limiters. However, it has not been researched, especially stagnation and re-strike of the arc. In this paper, the arc voltage between deion grid affected by division of arc in magnetic driven arc and arc behavior are measured by using the oscilloscope and HSVC (High Speed Video Camera). As a result, arc voltage increased because of division of the arc. The arc mean moving speed increases with increasing the external magnetic field. However, when the arc was not stalemate, the arc moving speed does not change so much. The arc re-strike time increases and stalemate time decreases with increasing the external magnetic field. Therefore, the anode spot moving speed increases 8 times because arc re-strike occurs easily with the external magnetic field. Thus, the erosion of electrodes decreases and the arc movement becomes the smooth. When the arc is divided, the arc voltage increased because of the electrode fall voltage. Therefore, the arc voltage increases with increasing the number of deion grid.

  9. Imaging Lithospheric Structure beneath the Indian continent

    NASA Astrophysics Data System (ADS)

    Maurya, S.; Montagner, J. P.; Mangalampally, R. K.; Stutzmann, E.; Burgos, G.; Kumar, P.; Davuluri, S.

    2015-12-01

    The lithospheric structure and thickness to the LAB are the most debated issues, especially beneath continents. In this context, the structure and thickness of the Indian lithosphere has been controversial. Paleomagnetic data reveals that the Indian continent moved northwards at exceptionally high speeds (18-20 cm/year) and subsequently slowed down to 4-5 cm/year after its collision with Asia ≈40 Myr ago. This super mobility has been explained by an unusually thin Indian lithosphere (≈100 km; Kumar et al., 2007) in contradiction with the thick lithosphere that commonly underlies old cratonic nuclei. It is pertinent to note that the thermobarometric estimates on the ultramafic xenoliths from 65 Myr kimberlites of the Central India (Babu et al. 2009) suggest an approximately 175 km thick lithosphere. Also, recent results of P and S wave travel time tomography of India suggest that the lithospheric roots are not uniformly thick on a regional scale. Although high velocity roots typical of Precambrian shields are preserved beneath a few cratons of the Indian shield, they seem to have suffered attrition, in the plume ravaged regions like the NDVP and the Southern SGT (Singh et al., 2014). We assembled a new massive surface wave database towards obtaining 3D isotropic and anisotropic models for the Indian sub-continent, using surface waves. This necessitated processing of data from more than 500 seismic broadband stations across India and surrounding regions. Surface waves group and phase dispersion measurements are performed in a broad frequency range (16-250s). Our phase velocity anomaly maps recover most of the known geological structures. The cratons are associated with high velocity (4-6%) anomalies till 200 sec, with the WDC being faster than the EDC. Slow velocities in NW India and very high velocity anomalies (6-8%) beneath the central part of the Indo-Gangetic plains are possibly associated with the subducting Indian lithosphere. The LAB depths inferred from

  10. Inverse-Ray Imaging of Gas Hydrates Along a MCS/OBS Profile at the Continental Slope Offshore SW Taiwan

    NASA Astrophysics Data System (ADS)

    Wang, T. K.; Chen, C.; Yang, B.; Lee, C.

    2006-12-01

    Prevalence of gas hydrates offshore SW Taiwan has been proposed due to lots of bottom-simulated reflectors (BSR) appeared on the seismic data. In this paper, we analyze a MCS/OBS profile with intensive BSR signals at the continental slope of the northern South China Sea. Firstly, MCS data with 160 channels collected by R/V Maurice-Ewing in September 1995 is re-processed through vertical velocity analysis, horizon velocity analysis, and prestack depth migration. Then, OBS data collected by the first Micro-OBS survey from NTOU team in August 2005 is analyzed through travel-time inversion of reflected and refracted arrivals for which the initial model is constructed from the MCS result. Finally, a novel technique of inverse reflected rays by considering both MCS and OBS data is applied for layer-stripping imaging of sedimentary layers. Velocity models imaged from three methods are confirmed the prevalence of BSR at 100-400 m depth below the sea floor along the whole profile. Relatively smooth sedimentary layers are observed below the lower slope of the continent whereas several mud diapers are imaged below the upper slope of the continent. Above the mud diapers, we find gas hydrates with high velocity of about 1.9-2.1 km/s and thickness of about 100 m immediately above the strong BSR. Similarly, near the mud diapers, free gas with low velocity of about 1.4-1.7 km/s and thickness of about 200 m is imaged. Migration of free gas through diapirism may result in lots of gas hydrates accumulated below the upper slope of the continent offshore SW Taiwan.

  11. Crustal accretion and exhumation of the Rio de la Plata Craton

    NASA Astrophysics Data System (ADS)

    Girelli, T. J.; Chemale, F., Jr.; Lavina, E.; Laux, J. H.; Bongiolo, E.; Lana, C.

    2017-12-01

    The Rio de la Plata is one key area for the reconstruction of the Paleoproterozoic Supercontinent in Western Gondwana. We present U-Pb-Hf isotopes, chemistry on minerals and whole-rock geochemistry from para and orthogneisses of the Santa Maria Chico Granulite Complex, one of the Rio de la Plata fragments partially affected by the Brasiliano Orogeny. U-Pb and Lu-Hf isotopes allowed the characterization of two main events: an oceanic juvenile crustal accretion (i) 2430 - 2290 Ma (ɛHf(t) -3.17 to +7.00); a continental arc (ii) 2240 - 2120 Ma (ɛHf(t)= -4 to +2.4). We recognized two main high-grade metamorphic events in the region linked to an arc volcanic setting (830 - 870 °C - 6.7 - 7.2 kbar, 2.3 Ga) and later to continent-continent collision (770 - 790 °C and 8.7 - 9.1 kbar, 2.1 - 2.0 Ga). The development of orogenic sedimentary basins (fore-arc and intra-arc) occurred during the last cycle with the maximum depositional age of 2.12 Ga and were metamorphosed during 2.06 Ga main granulitic event. The granulitic rocks were cut by 1.8 Ga alkaline granitic dikes related to crustal extension recognized in the different segments of the craton and widespread in the adjacent paleoplates at the time. The present data point to that Paleoproterozoic granulitic rocks of the Santa Maria Chico Granulite Complex and adjacent Nico Pérez and Rivera terranes, formed in a multi-stage volcanic arc to continental collision environment along 370 Ma (2430 to 2060 Ma). These terranes were amalgamated during the Paleoproterozoic to the core of the Rio de la Plata Craton as part of Columbia Supercontinent and later partially reworked during the amalgamation of Western Gondwana in the Neoproterozoic.

  12. Formation of forearc basins by collision between seamounts and accretionary wedges: an example from the New Hebrides subduction zone

    USGS Publications Warehouse

    Collot, J.-Y.; Fisher, M.A.

    1989-01-01

    Seabeam data reveal two deep subcircular reentrants in the lower arc slope of the New Hebrides island arc that may illustrate two stages in the development of a novel type of forearc basin. The Malekula reentrant lies just south of the partly subducted Bougainville seamount. This proximity, as well as the similarity in morphology between the reentrant and an indentation in the lower arc slope off Japan, suggests that the Malekula reentrant formed by the collision of a seamount with the arc. An arcuate fold-thrust belt has formed across the mouth of the reentrant, forming the toe of a new accretionary wedge. The Efate reentrant may show the next stage in basin development. This reentrant lies landward of a lower-slope ridge that may have begun to form as an arcuate fold-thrust belt across the mouth of a reentrant. This belt may have grown by continued accretion at the toe of the wedge, by underplating beneath the reentrant, and by trapping of sediment shed from the island arc. These processes could result in a roughly circular forearc basin. Basins that may have formed by seamount collision lie within the accretionary wedge adjacent to the Aleutian trenches. -Authors

  13. Introduction to TETHYS—an interdisciplinary GIS database for studying continental collisions

    NASA Astrophysics Data System (ADS)

    Khan, S. D.; Flower, M. F. J.; Sultan, M. I.; Sandvol, E.

    2006-05-01

    The TETHYS GIS database is being developed as a way to integrate relevant geologic, geophysical, geochemical, geochronologic, and remote sensing data bearing on Tethyan continental plate collisions. The project is predicated on a need for actualistic model 'templates' for interpreting the Earth's geologic record. Because of their time-transgressive character, Tethyan collisions offer 'actualistic' models for features such as continental 'escape', collision-induced upper mantle flow magmatism, and marginal basin opening, associated with modern convergent plate margins. Large integrated geochemical and geophysical databases allow for such models to be tested against the geologic record, leading to a better understanding of continental accretion throughout Earth history. The TETHYS database combines digital topographic and geologic information, remote sensing images, sample-based geochemical, geochronologic, and isotopic data (for pre- and post-collision igneous activity), and data for seismic tomography, shear-wave splitting, space geodesy, and information for plate tectonic reconstructions. Here, we report progress on developing such a database and the tools for manipulating and visualizing integrated 2-, 3-, and 4-d data sets with examples of research applications in progress. Based on an Oracle database system, linked with ArcIMS via ArcSDE, the TETHYS project is an evolving resource for researchers, educators, and others interested in studying the role of plate collisions in the process of continental accretion, and will be accessible as a node of the national Geosciences Cyberinfrastructure Network—GEON via the World-Wide Web and ultra-high speed internet2. Interim partial access to the data and metadata is available at: http://geoinfo.geosc.uh.edu/Tethys/ and http://www.esrs.wmich.edu/tethys.htm. We demonstrate the utility of the TETHYS database in building a framework for lithospheric interactions in continental collision and accretion.

  14. Spatial distribution of non volcanic tremors offshore eastern Taiwan

    NASA Astrophysics Data System (ADS)

    Xie, X. S.; Lin, J. Y.; Hsu, S. K.; Lee, C. H.; Liang, C. W.

    2012-04-01

    Non-volcanic tremor (NVT), originally identified in the subduction zone of the southwest Japan, have been well studied in the circum-Pacific subduction zones and the transform plate boundary in California. Most studies related NVT to the release of fluids, while some others associated them with slow-slip events, and can be triggered instantaneously by the surface waves of teleseismic events. Taiwan is located at a complex intersection of the Philippines Sea Plate and the Eurasian Plate. East of Taiwan, the Philippine Sea plate subducts northward beneath the Ryukyu arc. The major part of the island results from the strong convergence between the two plates and the convergent boundary is along the Longitudinal Valley. Moreover, an active strike-slip fault along the Taitung Canyon was reported in the offshore eastern Taiwan. In such complicate tectonic environments, NVT behavior could probably bring us more information about the interaction of all the geological components in the area. In this study, we analyze the seismic signals recorded by the Ocean bottom Seismometer (OBS) deployed offshore eastern Taiwan in September 2009. TAMS (Tremor Active Monitor System) software was used to detect the presence of NVT. 200 tremor-like signals were obtained from the 3 weeks recording period. We use the SSA (Source-Scanning Algorithm) to map the possible distribution of the tremor. In total, 180 tremors were located around the eastern offshore Taiwan. The tremors are mainly distributed in two source areas: one is along the Taitung Canyon, and the other is sub-parallel to the Ryukyu Trench, probably along the plate interface. Many tremors are located at depth shallower than 5 km, which suggests a possible existence of a weak basal detachment along the sea bottom. Other tremors with larger depth may be related to the dehydration of the subducting sea plate as suggested by the former studies. Limited by the short recording period of the OBS experiment, we could not obtain any

  15. Current crustal deformation of the Taiwan orogen reassessed by cGPS strain-rate estimation and focal mechanism stress inversion

    NASA Astrophysics Data System (ADS)

    Chen, Sean Kuanhsiang; Wu, Yih-Min; Hsu, Ya-Ju; Chan, Yu-Chang

    2017-07-01

    We study internal deformation of the Taiwan orogen, a young arc-continental collision belt, which the spatial heterogeneity remains unclear. We aim to ascertain heterogeneity of the orogenic crust in depth when specifying general mechanisms of the Taiwan orogeny. To reach this goal, we used updated data of continuous GPS (cGPS) and earthquake focal mechanisms to reassess geodetic strain-rate and seismic stress fields of Taiwan, respectively. We updated the both data sets from 1990 to 2015 to provide large amount of constraints on surficial and internal deformation of the crust for a better understanding. We estimated strain-rate tensors by calculating gradient tensors of cGPS station velocities in horizontal 0.1°-spacing grids via Delaunay triangulation. We determined stress tensors within a given horizontal and vertical grid cell of 0.1° and 10 km, respectively, by employing the spatial and temporal stress inversion. To minimize effects of the 1999 Mw 7.6 Chi-Chi earthquake on trends of the strain and stress, we modified observational possible bias of the cGPS velocities after the earthquake and removed the first 15-month focal mechanisms within the fault rupture zone. We also calculated the Anderson fault parameter (Aϕ) based on stress ratios and rake angles to quantitatively describe tectonic regimes of Taiwan. By examining directions of seismic compressive axes and styles of faulting, our results indicate that internal deformation of the crust is presently heterogeneous in the horizontal and vertical spaces. Directions of the compressive axes are fan-shaped oriented between N10°W and N110°W in the western and mid-eastern Taiwan at the depths of 0-20 km and near parallel to orientations of geodetic compressional axes. The orientations agreed with predominantly reverse faulting in the western Taiwan at the same depth range, implying a brittle deformation regime against the Peikang Basement High. Orientations of the compressive axes most rotated counter

  16. A comprehensive assessment of collision likelihood in Geosynchronous Earth Orbit

    NASA Astrophysics Data System (ADS)

    Oltrogge, D. L.; Alfano, S.; Law, C.; Cacioni, A.; Kelso, T. S.

    2018-06-01

    Knowing the likelihood of collision for satellites operating in Geosynchronous Earth Orbit (GEO) is of extreme importance and interest to the global community and the operators of GEO spacecraft. Yet for all of its importance, a comprehensive assessment of GEO collision likelihood is difficult to do and has never been done. In this paper, we employ six independent and diverse assessment methods to estimate GEO collision likelihood. Taken in aggregate, this comprehensive assessment offer new insights into GEO collision likelihood that are within a factor of 3.5 of each other. These results are then compared to four collision and seven encounter rate estimates previously published. Collectively, these new findings indicate that collision likelihood in GEO is as much as four orders of magnitude higher than previously published by other researchers. Results indicate that a collision is likely to occur every 4 years for one satellite out of the entire GEO active satellite population against a 1 cm RSO catalogue, and every 50 years against a 20 cm RSO catalogue. Further, previous assertions that collision relative velocities are low (i.e., <1 km/s) in GEO are disproven, with some GEO relative velocities as high as 4 km/s identified. These new findings indicate that unless operators successfully mitigate this collision risk, the GEO orbital arc is and will remain at high risk of collision, with the potential for serious follow-on collision threats from post-collision debris when a substantial GEO collision occurs.

  17. Lower Oligocene Alpine geodynamic change: tectonic and sedimentary evidences in the western arc

    NASA Astrophysics Data System (ADS)

    Dumont, T.; Rolland, Y.; Simon-Labric, T.

    2009-04-01

    The formation of the western Alpine arc started during the earliest Oligocene, after a drastic kinematic change in the collisional regime. (A) Previously, south-southeast dipping subduction of the European lithosphere (including Briançonnais) underneath Adria resulted in an underfilled flexural basin propagating towards the north-northwest on the European foreland, which had already been moderately deformed due to the Iberian microplate motion. This propagation appears consistent with the Africa-Europe relative motion (Rosenbaum et al., 2002). During this early stage of collision, some oceanic units were obducted over the southern part of European continent (Corsica, Briançonnais). (B) From the early Oligocene on, the western Alps kinematics were dominated by lateral (westward) escape of the Internal Alps indenter, whose displacement with anticlockwise rotation progressively formed the arc. The structures of this mature stage of collision crosscut the buildup issued from (A), and its kinematics were probably more driven by local lithospheric forces of the Mediterranean domain (Jolivet et al., 1999) than by Africa-Europe convergence. The western and southern parts of the western Alpine arc display many evidences for this major syn-collisional change: - Structural interferences are found at various scales. For example, the circular-shape Pelvoux massif resulted in part from crossed shortening stages (SE-NW and E-W; Dumont et al., 2008). It is located in the footwall of two nappes stacks having propagated northwestwards and west- to southwestwards, respectively. The latter crosscuts the former south of Briançon city. - Tectonic transport directions are strongly variable both in the external and in the internal zones, but they consistently display anticlockwise rotation through time. The most important changes are found in the southern part of the western Alps, giving birth to a radial distribution propagating into the external zone. - Instead of beeing gradual, the

  18. Continence following radical retropubic prostatectomy using self-reporting instruments.

    PubMed

    Lepor, Herbert; Kaci, Ledia; Xue, Xiaonan

    2004-03-01

    We performed a global self-assessment of continence following radical retropubic prostatectomy (RRP) and determined how this global self-assessment of continence correlates with commonly used definitions of continence. Between October 2000 and February 2002 all men who underwent RRP were encouraged to complete the University of California-Los Angeles Prostate Cancer Index 3, 6, 12 and 24 months postoperatively. Beginning October 2002 a single question capturing the patient global self-assessment of continence status was added to the postoperative continence assessment. The study design was cross-sectional since only continence surveys submitted between October 2002 through February 2003 were evaluated. Sensitivity, specificity and kappa coefficient was determined for the relationship between the patient global assessment of continence vs the definition of continence based on pad requirement, problem due to incontinence and frequency of incontinence. Continence progressively improved 3 to 24 months following RRP for all continence outcomes. At 24 months following RRP 97.1% of men considered themselves continent, while 97.1%, 94.1% and 97.1% were considered continent using continence definitions, including the requirement of no or 1 pad in a 24-hour interval, no or slight bother due to incontinence and total control or occasional dribbling, respectively. Our 3 definitions of continence derived from responses to the University of California-Los Angeles Prostate Cancer Index had excellent agreement with patient global self-assessment of continence (kappa coefficients between 0.76 and 0.83). The majority of men achieve continence without invasive intervention following RRP. Final continence status should be ascertained at 24 months. The patient global assessment of continence provides face validity for other definitions of continence based on responses to validated self-administered questionnaires.

  19. Detecting Moho Boundary under Taiwan with Wide-angle Data by Ray-tracing Method - The TAIGER Project

    NASA Astrophysics Data System (ADS)

    Kuo, Y. N.; Wang, C.; Okaya, D. A.

    2009-12-01

    Taiwan is located at the converging boundary of the Eurasian plate and the Philippine Sea plate, and is one of the most rapidly uplifting orogeny in the world. The geological structure is relatively complicated. There exist several models of tectonic collisions from the thin-skinned thrust, the lithospheric collision, to uplifting by buoyancy. The shape of Moho should be a key factor to evaluate these models. In this study, we try to detect the Moho beneath Taiwan using the newly collected wide-angle data from the Taiwan Integrated Geodynamic Research (TAIGER) project. The results could be of help to set up some constrains for the Taiwan tectonics. The TAIGER project is a collaboration between America and Taiwan. The land stations collected two parts of data (land and marine) generated by active sources. The land part was carried out in 2008/2~3, which created 6 kinds of data from explosion sources including: 1) 3 E-W wide-angle reflections of Texans arrays; 2) 2 N-S seismometer arrays; 3) the seismic networks of Central Weather Bureau(CWB) and Institute of Earth Science(IES) over the island; 4) a short array of RT130; 5) 2 short period OBS arrays in the Taiwan Strait; 6) 2 temporary seismic arrays in Fujan, mainland China. The marine part was carried out in 2009/4~6, which provided 4 kinds of data from air-gun sources including: 1) 4 wide-angle refractions of E-W RT130 arrays; 2) 2 N-S seismometer arrays; 3) the CWB network; 4) the broad band array in Taiwan for Seismology(BATS). In this study, we focus on analyzing the wide-angle data, which contain land explosion data, onshore-offshore data, OBS data and mainland data, especially concentrate on the line in the southern Taiwan (Transect T4). We make a summary of the TAIGER project and show several plots of real data and arrivals. A 2D E-W velocity model was constructed from the mainland side to the ocean side about 600 km long using the ray-tracing method with layer-striping technique. The preliminary results are

  20. The Sunda-Banda Arc Transition: New Insights from Marine Multichannel Seismic Data

    NASA Astrophysics Data System (ADS)

    Mueller, C.; Kopp, H.; Djajadihardja, Y.; Engels, M.; Flueh, E.; Gaedicke, C.; Lueschen, E.; Lutz, R.; Planert, L.; Shulgin, A.; Soemantri, D. D.

    2007-12-01

    the 4000 m deep forearc Lombok Basin offshore Bali, Lombok, and Sumbawa. The eastern termination of the Lombok Basin is formed by Sumba Island, which shows evidence for recent uplift, probably associated with the collision of the island arc with the continental Scott Plateau. The Sumba area represents the transition from subduction to collision. Our seismic profiles image the bending of the oceanic crust seaward of the trench and associated normal faulting. Landward of the trench, they image the subducting slab beneath the outer arc high, where the former bending-related normal faults appear to be reactivated as reverse faults introducing vertical displacements in the subducting slab. The accretionary prism and the outer arc high are characterized by an ocean-verging system of imbricate thrust sheets with major thrust faults connecting seafloor and detachment. Compression results in shortening and steepening of the imbricated thrust sheets building up the outer arc high. Tilted piggy-back basins and downlaps of tilted sediments in the southern Lombok forearc basin indicate ongoing uplift of the entire outer arc high, abrupt displacements, and recent tectonic activity.

  1. Structure of Benthic Communities along the Taiwan Latitudinal Gradient

    PubMed Central

    De Palmas, Stéphane; Kuo, Chao-Yang; Hsieh, Hernyi Justin; Chen, Chaolun Allen

    2016-01-01

    The distribution and the structure of benthic assemblages vary with latitude. However, few studies have described benthic communities along large latitudinal gradients, and patterns of variation are not fully understood. Taiwan, lying between 21.90°N and 25.30°N, is located at the center of the Philippine-Japan arc and lies at the northern margin of coral reef development. A wide range of habitats is distributed along this latitudinal gradient, from extensive fringing coral reefs at the southern coast to non-reefal communities at the north. In this study, we examined the structure of benthic communities around Taiwan, by comparing its assemblages in four regions, analyzing the effects of the latitudinal gradient, and highlighting regional characteristics. A total of 25 sites, 125 transects, and 2,625 photographs were used to analyze the benthic communities. Scleractinian corals present an obvious gradient of increasing diversity from north to south, whereas macro-algae diversity is higher on the north-eastern coast. At the country scale, Taiwanese coral communities were dominated by turf algae (49%). At the regional scale, we observed an important heterogeneity that may be caused by local disturbances and habitat degradation that smooths out regional differences. In this context, our observations highlight the importance of managing local stressors responsible for reef degradation. Overall, this study provides an important baseline upon which future changes in benthic assemblages around Taiwan can be assessed. PMID:27513665

  2. Silurian to Early Carboniferous plate tectonic model of Central Europe

    NASA Astrophysics Data System (ADS)

    Golonka, Jan; Barmuta, Jan; Barmuta, Maria

    2014-05-01

    The presented plate tectonic model focuses on Silurian to Early Carboniferous evolution of Central Europe with special attention given to the Sudetes region (north and north-east part of the Bohemian Massif). During our studies, we tested alternative models focused on the position of the Armorican terranes, known as the Armorican Terrane Assembly (ATA) (e.g.: Matte, 2001) and tried to refine the existing reconstructions, which describe Armorica as an individual continent during the Late Silurian and Devonian (e.g. Lewandowski, 2003, Winchester, 2002). Our plate tectonic model depict that these small blocks were scattered along the northern margin of Gondwana, where they formed the "Armorican Spour" as suggested by Kroner and Romer (2013). The seaways were present between blocks. Because of the north dipping subduction zone along the southern margin of the Laurussia continent the back-arc basin and island arc were formed. The narrowing of the Rheic ocean led to the complicated collision of Gondwana and Laurussia. Three main stages of this event can be distinguished: (1) collision of the Armorican Spour with the Laurussian island arc, (2) back-arc basin closure, (3) final Gondwana and Laurussian collision. Those stages correlate well with Variscan Subduction Zone System proposed by Kroner and Romer (2013). Interactive modeling performed in GPlates, shows that the presented model is valid from kinematic and geometrical point of view. Kroner U., Romer R., L., 2013, Two plates - many subduction zones: the Variscan orogeny reconsidered. Gondwana Research, 24: 298-329. Lewandowski M., 2003, Assembly of Pangea: Combined paleomagnetic and paleoclimatic approach, Advances in Geophysics, 46: 199-236 Matte P., 2001, The Variscan collage and orogeny (480 290 Ma) and the tectonic definition of the Armorica microplate: a review. Terra Nova, 13: 122¨C128. Winchester J., A., The Pace TMR Network Team, 2002, Palaeozoic amalgamation of Central Europe: new results from recent

  3. Earth's first stable continents did not form by subduction

    NASA Astrophysics Data System (ADS)

    Johnson, Tim; Brown, Michael; Gardiner, Nicholas; Kirkland, Christopher; Smithies, Hugh

    2017-04-01

    The geodynamic setting in which Earth's first stable cratonic nuclei formed remains controversial. Most exposed Archaean continental crust comprises rocks of the tonalite-trondhjemite-granodiorite (TTGs) series that were produced from partial melting of low magnesium basaltic source rocks and have 'arc-like' trace element signatures that resemble continental crust produced in modern supra-subduction zone settings. The East Pilbara Terrane, Western Australia, is amongst the oldest fragments of preserved continental crust of Earth. Low magnesium basalts of the Paleoarchaean Coucal Formation, at the base of the Pilbara Supergroup, have trace element compositions consistent with the putative source rocks for TTGs. These basalts may be remnants of the ≥35 km-thick pre-3.5 Ga plateau-like basaltic crust that is predicted to have formed if mantle temperatures were much hotter than today. Using phase equilibria modelling of an average uncontaminated Coucal basalt, we confirm their suitability as TTG source rocks. The results suggest that TTGs formed by 20-30% melting along high geothermal gradients (≥700 °C/GPa), which accord with apparent geotherms recorded by >95% of Archaean rocks worldwide. Moreover, the trace element composition of the Coucal basalts demonstrates that they were derived from an earlier generation of mafic/ultramafic rocks, and that the arc-like signature in Archaean TTGs was inherited through an ancestral source lineage. The protracted multistage process required for production and stabilisation of Earth's first continents, coupled with the high geothermal gradients, are incompatible with modern-style subduction and favour a stagnant lid regime in the early Archaean.

  4. Cumulative co-seismic displacement and comparison with GPS observations in Taiwan

    NASA Astrophysics Data System (ADS)

    Xu, C.; Chao, B. F.; Sun, W.

    2013-12-01

    The island of Taiwan owes its existence to the collision of the Eurasian plate and the Philippine Sea plate. The strong seismicity can produce permanent displacement field which can be observed by GPS. Both seismological and GPS networks have been fully established in Taiwan for years. In this paper, we will study the earthquake-induced relative movements, including the amplitude and pattern, and determine how much cumulative co-seismic displacement can contribute to the observed GPS signals as long-term 'trends', by comparing the two sets of data. The co-seismic displacement is calculated by adopting the elastic dislocation theory on a spherical Earth as derived by Sun and Okubo. For the GPS observations, we will remove the seasonal and tidal effects by the least square method and the common-mode errors by the empirical orthogonal function technique. The comparison results show that the earthquake-induced displacements account only for a tiny fraction of the GPS signals, implying that the majority of the displacements in Taiwan during the studied period of 1995-2013 (which includes the largest 1999 Chi-Chi earthquake), both horizontal and vertical, are caused aseismically. The comparison also reveals some interesting details about the pattern and behavior of the displacement fields.

  5. Continent cecostomy. An account of 30 patients.

    PubMed

    Kock, N G; Myrvold, H E; Philipson, B M; Svaninger, G; Ojerskog, B

    1985-10-01

    In this paper, an account is given of our experience with continent colostomy in man. In five patients, the end-sigmoidostomy was provided with an intussusception valve. Evacuation of the bowel by irrigation through a catheter was laborious and time-consuming and this method was abandoned. In another group of 30 patients, the cecum was isolated from the rest of the colon and its distal end was provided with an intussusception valve. Of the 30 patients, eight were later given continent ileostomies, two were converted to conventional sigmoidostomies, and one patient with fecal incontinence preferred to have intestinal continuity reestablished. Thus, 19 patients still have continent cecostomies and are satisfied with their function. When comparing the function of the continent cecostomy with that of the continent ileostomy, however, it is obvious that the ileostomy function is superior. The experience obtained with this group of patients has resulted in a widening of the indications for constructing a continent ileostomy, including selected patients with various anorectal disorders.

  6. [The Kock continent urinary diversion].

    PubMed

    Boyd, S D; Skinner, D G; Lieskovsky, G

    1989-07-01

    The continent ileal reservoir as conceived by Kock produces a low-pressure, high-capacity reservoir with continent and nonrefluxing valves constructed from ileum. From August 1982 through March 1988, 531 patients underwent continent urinary diversion via a Kock reservoir at our institution. Of these, 39 males had a Kock bladder substitution, while the rest underwent cutaneous Kock diversion. Early complications occurred in 16% of all patients, and there was an operative mortality rate of 1.9%. Surgical modifications of nipple fixation, which are discussed in detail in this paper, help to reduce late complications to less than 10%. Patient satisfaction with both procedures remains excellent.

  7. ArcS, the cognate sensor kinase in an atypical Arc system of Shewanella oneidensis MR-1.

    PubMed

    Lassak, Jürgen; Henche, Anna-Lena; Binnenkade, Lucas; Thormann, Kai M

    2010-05-01

    The availability of oxygen is a major environmental factor for many microbes, in particular for bacteria such as Shewanella species, which thrive in redox-stratified environments. One of the best-studied systems involved in mediating the response to changes in environmental oxygen levels is the Arc two-component system of Escherichia coli, consisting of the sensor kinase ArcB and the cognate response regulator ArcA. An ArcA ortholog was previously identified in Shewanella, and as in Escherichia coli, Shewanella ArcA is involved in regulating the response to shifts in oxygen levels. Here, we identified the hybrid sensor kinase SO_0577, now designated ArcS, as the previously elusive cognate sensor kinase of the Arc system in Shewanella oneidensis MR-1. Phenotypic mutant characterization, transcriptomic analysis, protein-protein interaction, and phosphotransfer studies revealed that the Shewanella Arc system consists of the sensor kinase ArcS, the single phosphotransfer domain protein HptA, and the response regulator ArcA. Phylogenetic analyses suggest that HptA might be a relict of ArcB. Conversely, ArcS is substantially different with respect to overall sequence homologies and domain organizations. Thus, we speculate that ArcS might have adopted the role of ArcB after a loss of the original sensor kinase, perhaps as a consequence of regulatory adaptation to a redox-stratified environment.

  8. Linking Late Cretaceous to Eocene Tectonostratigraphy of the San Jacinto Fold Belt of NW Colombia With Caribbean Plateau Collision and Flat Subduction

    NASA Astrophysics Data System (ADS)

    Mora, J. Alejandro; Oncken, Onno; Le Breton, Eline; Ibánez-Mejia, Mauricio; Faccenna, Claudio; Veloza, Gabriel; Vélez, Vickye; de Freitas, Mario; Mesa, Andrés.

    2017-11-01

    Collision with and subduction of an oceanic plateau is a rare and transient process that usually leaves an indirect imprint only. Through a tectonostratigraphic analysis of pre-Oligocene sequences in the San Jacinto fold belt of northern Colombia, we show the Late Cretaceous to Eocene tectonic evolution of northwestern South America upon collision and ongoing subduction with the Caribbean Plate. We linked the deposition of four fore-arc basin sequences to specific collision/subduction stages and related their bounding unconformities to major tectonic episodes. The Upper Cretaceous Cansona sequence was deposited in a marine fore-arc setting in which the Caribbean Plate was being subducted beneath northwestern South America, producing contemporaneous magmatism in the present-day Lower Magdalena Valley basin. Coeval strike-slip faulting by the Romeral wrench fault system accommodated right-lateral displacement due to oblique convergence. In latest Cretaceous times, the Caribbean Plateau collided with South America marking a change to more terrestrially influenced marine environments characteristic of the upper Paleocene to lower Eocene San Cayetano sequence, also deposited in a fore-arc setting with an active volcanic arc. A lower to middle Eocene angular unconformity at the top of the San Cayetano sequence, the termination of the activity of the Romeral Fault System, and the cessation of arc magmatism are interpreted to indicate the onset of low-angle subduction of the thick and buoyant Caribbean Plateau beneath South America, which occurred between 56 and 43 Ma. Flat subduction of the plateau has continued to the present and would be the main cause of amagmatic post-Eocene deposition.

  9. The preliminary results of new submarine caldera on the west of Kume-jima island, Central Ryukyu Arc, Japan

    NASA Astrophysics Data System (ADS)

    Harigane, Y.; Ishizuka, O.; Shimoda, G.; Sato, T.

    2014-12-01

    The Ryukyu Arc occurs between the islands of Kyushu and Taiwan with approximately 1200 km in the full length. This volcanic arc is caused by subduction of the Philippine Sea plate beneath the Eurasia Plate along the Ryukyu trench, and is composed of forearc islands, chains of arc volcanoes, and a back-arc rift called Okinawa Trough. The Ryukyu Arc is commonly divided into three segments (northern, central and southern) that bounded by the Tokara Strait and the Kerama Gap, respectively (e.g., Konishi 1965; Kato et al., 1982). Sato et al. (2014) mentioned that there is no active subaerial volcano in the southwest of Iotori-shima in the Central Ryukyu Arc whereas the Northern Ryukyu Arc (i.e., the Tokara Islands) has active frontal arc volcanoes. Therefore, the existence of volcanoes and volcanotectonic history of active volcanic front in the southwestern part of the Central Ryukyu Arc are still ambiguous. Detailed geophysical and geological survey was mainly conducted using R/V Kaiyou-maru No.7 during GK12 cruise operated by the Geological Survey of Japan/National Institute of Advanced Industrial Science and Technology, Japan. As a result, we have found a new submarine volcanic caldera on the west of Kume-jima island, where located the southwestern part of Central Ryukyu Arc. Here, we present (1) the bathymetrical feature of this new submarine caldera for the first time and (2) the microstructural and petrological observations of volcanic rocks (20 volcanic samples in 13 dredge sites) sampled from the small volcanic cones of this caldera volcano. The dredged samples from the caldera consist of mainly rhyolite pumice with minor andesites, Mn oxides-crust and hydrothermally altered rocks. Andesite has plagioclase, olivine and pyroxene phenocrysts. Key words: volcanic rock, caldera, arc volcanism, active volcanic front, Kume-jima island, Ryukyu Arc

  10. Active deformation and evolution of the upper forearc slope of the central Ryukyu Arc, northwestern Pacific

    NASA Astrophysics Data System (ADS)

    Arai, K.; Inoue, T.; Sato, T.

    2016-12-01

    The Ryukyu Arc, which extend for over 1200 km along the east coast of Asia from Kyushu to Taiwan, and the associated Ryukyu Trench, are products of the subduction of the Philippine Sea Plate beneath the Eurasian Plate. The Okinawa Trough, a back-arc basin located landward of the Ryukyu Arc, formed in the Late Miocene (Gungor et al., 2012) or the Late Pliocene-Early Pleistocene (Sibuet et al., 1998); its formation is a key geologic event associated with complex tectonic movements and changes in the topographic configuration of the Ryukyu Arc. Geological Survey of Japan (GSJ), AIST has started the marine geological mapping project around Ryukyu Arc since the 2008 FY. Multi channel (16 ch) high-resolution seismic profiles were acquired during these cruises by the GI-gun (355cu. inch) or the Cluster-gun (30+30 cu. inch) systems. Survey area in the southeast off Okinawa Island is located on the upper forearc slope along the Ryukyu Trench. Seismic reflections of shelf and the upper forearc slope show no obvious deformation such as the fold and faults parallel to the Ryukyu Trench axis. In contrast, some active faults, which were perpendicular to the Ryukyu Trench axis (NW-SE direction), were observed. An acoustic basement, which is characterized distinct reflector had tilted southeastward (trenchward) and was unconformable overlain by the stratified sediments. These sediments divided into four seismic units. We present the geological history and tectonics of the central Ryukyu Arc.

  11. Late Cretaceous infant intra-oceanic arc volcanism, the Central Pontides, Turkey: Petrogenetic and tectonic implications

    NASA Astrophysics Data System (ADS)

    Aygül, Mesut; Okay, Aral I.; Oberhänsli, Roland; Schmidt, Alexander; Sudo, Masafumi

    2015-11-01

    A tectonic slice of an arc sequence consisting of low-grade metavolcanic rocks and overlying metasedimentary succession is exposed in the Central Pontides north of the İzmir-Ankara-Erzincan suture separating Laurasia from Gondwana-derived terranes. The metavolcanic rocks mainly consist of basaltic andesite/andesite and mafic cognate xenolith-bearing rhyolite with their pyroclastic equivalents, which are interbedded with recrystallized pelagic limestone and chert. The metasedimentary succession comprises recrystallized micritic limestone with rare volcanogenic metaclastic rocks and stratigraphically overlies the metavolcanic rocks. The geochemistry of the metavolcanic rocks indicates an arc setting evidenced by depletion of HFSE (Ti, P and Nb) and enrichment of fluid mobile LILE. Identical trace and rare earth elements compositions of basaltic andesites/andesites and rhyolites suggest that they are cogenetic and derived from a common parental magma. The arc sequence crops out between an Albian-Turonian subduction-accretionary complex representing the Laurasian active margin and an ophiolitic mélange. Absence of continent derived detritus in the arc sequence and its tectonic setting in a wide Cretaceous accretionary complex suggest that the Kösdağ Arc was intra-oceanic. Zircons from two metarhyolite samples give Late Cretaceous (93.8 ± 1.9 and 94.4 ± 1.9 Ma) U/Pb ages. These ages are the same as the age of the supra-subduction ophiolites in western Turkey, which implies that that the Kösdağ Arc may represent part of the incipient arc formed during the generation of the supra-subduction ophiolites. The low-grade regional metamorphism in the Kösdağ Arc is constrained to 69.9 ± 0.4 Ma by 40Ar/39Ar muscovite dating indicating that the arc sequence became part of a wide Tethyan Cretaceous accretionary complex by the latest Cretaceous. Non-collisional cessation of the arc volcanism is possibly associated with southward migration of the magmatism as in the Izu

  12. A novel post-arc current measuring equipment based on vacuum arc commutation and arc blow

    NASA Astrophysics Data System (ADS)

    Liao, Minfu; Ge, Guowei; Duan, Xiongying; Huang, Zhihui

    2017-07-01

    The paper proposes a novel post-arc current measuring equipment (NPACME), which is based on the vacuum arc commutation and magnetic arc blow. The NPACME is composed of the vacuum circuit breaker (VCB), shunt resistor, protective gap, high-precision current sensor and externally applied transverse magnetic field (ETMF). The prototype of the NPACME is designed and controlled by optical fiber communications. The vacuum arc commutation between the vacuum arc and the shunt resistor with ETMF is investigated. The test platform is established in the synthetic short-circuit test and the vacuum arc is observed by the high speed CMOS camera. The mathematic description of the vacuum arc commutation is obtained. Based on the current commutation characteristic, the parameters of the NPACME are optimized and the post-arc current is measured. The measuring result of the post-arc current is accurate with small interference and the post-arc charge is obtained. The experimental results verify that the NPACME is correct and accurate, which can be used to measure the post-arc characteristic in breaking test.

  13. ARC and Melting Efficiency of Plasma ARC Welds

    NASA Technical Reports Server (NTRS)

    McClure, J. C.; Nunes, A. C.; Evans, D. M.

    1999-01-01

    A series of partial penetration Variable Polarity Plasma Arc welds were made at equal power but various combinations of current and voltage on 2219 Aluminum. Arc efficiency was measured calorimetrically and ranged between 48% and 66% for the conditions of the welds. Arc efficiency depends in different ways on voltage and current. The voltage effect dominates. Raising voltage while reducing current increases arc efficiency. Longer, higher voltage arcs are thought to transfer a greater portion of arc power to the workpiece through shield gas convection. Melting efficiency depends upon weld pool shape as well as arc efficiency. Increased current increases the melting efficiency as it increases the depth to width ratio of the weld pool. Increased plasma gas flow does the same thing. Higher currents are thought to raise arc pressure and depress liquid at the bottom of the weld pool. More arc power then transfers to the workpiece through increasing plasma gas convection. If the power is held constant, the reduced voltage lowers the arc efficiency, while the pool shape change increases the melting efficiency,

  14. 3-D Numerical Modelling of Oblique Continental Collisions with ASPECT

    NASA Astrophysics Data System (ADS)

    Karatun, L.; Pysklywec, R.

    2017-12-01

    Among the fundamental types of tectonic plate boundaries, continent-continent collision is least well understood. Deformation of the upper and middle crustal layers can be inferred from surface structures and geophysical imaging, but the fate of lower crustal rocks and mantle lithosphere is not well resolved. Previous research suggests that shortening of mantle lithosphere generally may be occurring by either: 1) a distributed thickening with a formation of a Raleigh-Tailor (RT) type instability (possibly accompanied with lithospheric folding); or 2) plate-like subduction, which can be one- or two-sided, with or without delamination and slab break-off; a combination of both could be taking place too. 3-D features of the orogens such as along-trench material transfer, bounding subduction zones can influence the evolution of the collision zone significantly. The current study was inspired by South Island of New Zealand - a young collision system where a block of continental crust is being shortened by the relative Australian-Pacific plate motion. The collision segment of the plate boundary is relatively small ( 800 km), and is bounded by oppositely verging subduction zones to the North and South. Here, we present results of 3-D forward numerical modelling of continental collision to investigate some of these processes. To conduct the simulations, we used ASPECT - a highly parallel community-developed code based on the Finite Element method. Model setup for three different sets of models featured 2-D vertical across strike, 3-D with periodic front and back walls, and 3-D with open front and back walls, with velocities prescribed on the left and right faces. We explored the importance of values of convergent velocity, strike-slip velocity and their ratio, which defines the resulting velocity direction relative to the plate boundary (obliquity). We found that higher strike-slip motion promotes strain localization, weakens the lithosphere close to the plate boundary and

  15. Gravity and magnetic anomalies of the Cyprus arc and tectonic implications

    NASA Astrophysics Data System (ADS)

    Ergün, M.; Okay, S.; Sari, C.; Oral, E. Z.

    2003-04-01

    In present day, eastern Mediterranean is controlled by the collision of the African and Eurasian plates and displacements of Arabian, Anatolian and Aegean micro-plates. The boundary between African and Eurasian plates is delineated by the Hellenic arc and Pliny-Strabo trench in the west and the Cyprus arc and a diffuse fault system of the Eastern Anatolian Fault zone in the east. The available gravity and magnetic data from the easternmost Mediterranean allow to subdivide this basin into three provinces: the northeastern Mediterranean north of the Cyprus Arc; the Levant Basin south of the Cyprus Arc and east of the line that roughly continues the Suez rift trend toward the Gulf of Antalya, between Cyprus and Anaximander Mountains; and the Mediterranean Ridge, Herodotus Basin west of this line. High anomalies observed in Cyprus and the sea region at the south is prominent in the gravity data. The Bouguer gravity anomaly reaches its maximum values over Cyprus, where it is most probably caused by high dense Troodos ophiolites. The uplifted oceanic crust causes high Bouguer anomaly also seen in the vicinity of Eratosthenes Seamount. Another result obtained from gravity data is that the crust under Herodotos and Rhodes basins is somehow oceanic and Anaximander, Eratosthenes and Cyprus are continental fragments. There are no linear magnetic anomalies in the Mediterranean. But there are magnetic anomalies over the Eratosthenes seamount and as well as from Cyprus to the Antalya basin due to the ophiolitic bodies. In Cyprus, the last compressional deformations were defined near the Miocene/Pliocene boundary. The extensional deformation associated with the Antalya basin appears to be separated by a zone of the Florence rise and Anaximander Mountains affected by differential tectonic movements. Eratosthenes Seamount is a positive crustal feature in the process of collision with Cyprus along an active margin; there is clearly a potential tectonic relationship to the onland

  16. Variations in the kinematics of deformation along the Zagros inclined transpression zone, Iran: Implications for defining a curved inclined transpression zone

    NASA Astrophysics Data System (ADS)

    Sarkarinejad, Khalil; Partabian, Abdolreza; Faghih, Ali

    2013-03-01

    The combination of inclined collision and plate boundary shape can control the nature of deformation and the sense of shear along a transpression zone. The present study investigated the effects of a boundary zone with curvilinear shape along a transpression zone on the kinematics of deformation. The kinematics of the Zagros transpression zone varies with the orientation of the zone boundary. Detailed structural and microstructural studies showed sinistral sense of shear on the southeastern part of the Zagros inclined transpression zone (Fars Arc), but dextral sense of shear on the northwestern part of the zone. It is inferred that the both senses of shear were developed coevally under a bulk general shear, regional-scale deformation along a curved inclined transpression miming the shape of the Fras Arc of the Zagros and the reentrant of the Bandar Abbas Syntaxis. The Zagros transpression zone formed by inclined continental collision between the Afro-Arabian continent and Iranian microcontinent.

  17. Control of arc length during gas metal arc welding

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Madigan, R.B.; Quinn, T.P.

    1994-12-31

    An arc-length control system has been developed for gas metal arc welding (GMAW) under spray transfer welding conditions. The ability to monitor and control arc length during arc welding allows consistent weld characteristics to be maintained and therefore improves weld quality. Arc length control has only been implemented for gas tungsten arc welding (GTAW), where an automatic voltage control (AVC) unit adjusts torch-to-work distance. The system developed here compliments the voltage- and current-sensing techniques commonly used for control of GMAW. The system consists of an arc light intensity sensor (photodiode), a Hall-effect current sensor, a personal computer and software implementingmore » a data interpretation and control algorithms. Arc length was measured using both arc light and arc current signals. Welding current was adjusted to maintain constant arc length. A proportional-integral-derivative (PID) controller was used. Gains were automatically selected based on the desired welding conditions. In performance evaluation welds, arc length varied from 2.5 to 6.5 mm while welding up a sloped workpiece (ramp in CTWD) without the control. Arc length was maintained within 1 mm of the desired (5 mm ) with the control.« less

  18. Analysis of continence rates following robot-assisted radical prostatectomy: strict leak-free and pad-free continence.

    PubMed

    Reynolds, W Stuart; Shikanov, Sergey A; Katz, Mark H; Zagaja, Gregory P; Shalhav, Arieh L; Zorn, Kevin C

    2010-02-01

    To propose a strict and specific definition of continence (leak-free and pad-free [LFPF]) and apply it to robot-assisted radical prostatectomy (RARP) outcomes on the basis of University of California-Los Angeles-Prostate Cancer Index (UCLA-PCI), as postprostatectomy incontinence is not well defined. A single-institution RARP database was reviewed concerning continence variables prospectively recorded by the UCLA-PCI. Specific responses to urinary function and continence items were reviewed at baseline and 1, 3, 6, 12, and 24 months after surgery. From February 2003 to September 2007, a total of 1005 of 1500 RARP patients had data available for review. At baseline, only 73% of these patients were LFPF. This decreased to 4%, 9%, 17%, 24%, and 28% at 1, 3, 6, 12, and 24 months after surgery, respectively. Applying less strict definitions, at 24 months, 68% of patients reported no pad use and 90% of patients reported no pad use or the use of a security pad. When stratified by baseline LFPF status, patients not LFPF at baseline had higher baseline international prostate symptom score scores, lower urinary function scores, lower urinary bother scores, and larger prostate weights. Patients LFPF at baseline disproportionately regained LFPF continence starting 6 months after surgery compared with those not LFPF at baseline: 20% vs 9% (P = .005), 27% vs 15% (P = .0009), and 33% vs 15% (P = .0146) at 6, 12, and 24 months, respectively. A strict definition of urinary continence results in more conservative postoperative outcomes. Preoperative LFPF status can be predictive of postoperative LFPF continence. However, only one-third of patients LFPF at baseline returned to LFPF at 24 months. 2010 Elsevier Inc. All rights reserved.

  19. Metal halide arc discharge lamp having short arc length

    NASA Technical Reports Server (NTRS)

    Muzeroll, Martin E. (Inventor)

    1994-01-01

    A metal halide arc discharge lamp includes a sealed light-transmissive outer jacket, a light-transmissive shroud located within the outer jacket and an arc tube assembly located within the shroud. The arc tube assembly includes an arc tube, electrodes mounted within the arc tube and a fill material for supporting an arc discharge. The electrodes have a spacing such that an electric field in a range of about 60 to 95 volts per centimeter is established between the electrodes. The diameter of the arc tube and the spacing of the electrodes are selected to provide an arc having an arc diameter to arc length ratio in a range of about 1.6 to 1.8. The fill material includes mercury, sodium iodide, scandium tri-iodide and a rare gas, and may include lithium iodide. The lamp exhibits a high color rendering index, high lumen output and high color temperature.

  20. Reactivation versus reworking of the active continental margin during the Zagros collision: Mahallat-Muteh-Laybid complexes, Sanandaj-Sirjan zone, Iran

    NASA Astrophysics Data System (ADS)

    Aflaki, Mahtab; Shabanian, Esmaeil; Davoodi, Zeinab; Mohajjel, Mohammad

    2017-06-01

    Reactivation of long-lived basement faults has significant influences on further deformation of collision zones. Three major inherited pre-collisional NW-, N- and NE-trending basement discontinuities have played important roles on the structural and tectono-sedimentary evolution of the Iranian micro-continent in the northeastern part of the Gondwana super-continent. Sanandaj-Sirjan zone (SSZ), known as the metamorphic belt of the Zagros orogeny, marks the SW margin of the Central Iran. SSZ is formed as a result of the Arabia-Eurasia collision and its general trend of deformation coincides with the NW structural trend of the collision. The NE-trending Mahallat, Muteh and Laybid complexes in the middle part of the NW-trending SSZ are the exception and have a trend almost normal to the NW-trending Zagros. A combined methodology of remote sensing, geometric and kinematics analyses complemented by field work was used to reconstruct the history of deformation in the Zagros hinterland since the earlier stages of collision to the present-day. Our results reveal the key role of the preexisting discontinuities of the Iranian basement in both the kinematics and structural pattern of the middle part of the SSZ. These basement faults have acted as main boundary conditions changing the collisional fabric perpendicular to its overall trend. Progressive deformation and the related changes during collision have caused drastic changes in the kinematics of the boundary faults. The establishment of dextral transtension in the SSZ has had secondary influences on the pattern of deformation by local clockwise rotation and localized dextral shear in the southern parts of the area of interest. This study highlights the significance of long-lived pre-existing structures in the deformation of collision zones. Such basement faults are capable to change both the pattern and kinematics of deformation of the adjacent areas involved in a continental collision.

  1. Gas arc constriction for plasma arc welding

    NASA Technical Reports Server (NTRS)

    McGee, William F. (Inventor); Rybicki, Daniel J. (Inventor)

    1994-01-01

    A welding torch for plasma arc welding apparatus has an inert gas applied circumferentially about the arc column externally of the constricting nozzle so as to apply a constricting force on the arc after it has exited the nozzle orifice and downstream of the auxiliary shielding gas. The constricting inert gas is supplied to a plenum chamber about the body of the torch and exits through a series of circumferentially disposed orifices in an annular wall forming a closure at the forward end of the constricting gas plenum chamber. The constricting force of the circumferential gas flow about the arc concentrates and focuses the arc column into a more narrow and dense column of energy after exiting the nozzle orifice so that the arc better retains its energy density prior to contacting the workpiece.

  2. Toward Broadband Source Modeling for the Himalayan Collision Zone

    NASA Astrophysics Data System (ADS)

    Miyake, H.; Koketsu, K.; Kobayashi, H.; Sharma, B.; Mishra, O. P.; Yokoi, T.; Hayashida, T.; Bhattarai, M.; Sapkota, S. N.

    2017-12-01

    The Himalayan collision zone is characterized by the significant tectonic setting. There are earthquakes with low-angle thrust faulting as well as continental outerrise earthquakes. Recently several historical earthquakes have been identified by active fault surveys [e.g., Sapkota et al., 2013]. We here investigate source scaling for the Himalayan collision zone as a fundamental factor to construct source models toward seismic hazard assessment. As for the source scaling for collision zones, Yen and Ma [2011] reported the subduction-zone source scaling in Taiwan, and pointed out the non-self-similar scaling due to the finite crustal thickness. On the other hand, current global analyses of stress drop do not show abnormal values for the continental collision zones [e.g., Allmann and Shearer, 2009]. Based on the compile profiling of finite thickness of the curst and dip angle variations, we discuss whether the bending exists for the Himalayan source scaling and implications on stress drop that will control strong ground motions. Due to quite low-angle dip faulting, recent earthquakes in the Himalayan collision zone showed the upper bound of the current source scaling of rupture area vs. seismic moment (< Mw 8.0), and does not show significant bending of the source scaling. Toward broadband source modeling for ground motion prediction, we perform empirical Green's function simulations for the 2009 Butan and 2015 Gorkha earthquake sequence to quantify both long- and short-period source spectral levels.

  3. Tertiary evolution of the Shimanto belt (Japan): A large-scale collision in Early Miocene

    NASA Astrophysics Data System (ADS)

    Raimbourg, Hugues; Famin, Vincent; Palazzin, Giulia; Yamaguchi, Asuka; Augier, Romain

    2017-07-01

    To decipher the Miocene evolution of the Shimanto belt of southwestern Japan, structural and paleothermal studies were carried out in the western area of Shikoku Island. All units constituting the belt, both in its Cretaceous and Tertiary domains, are in average strongly dipping to the NW or SE, while shortening directions deduced from fault kinematics are consistently orientated NNW-SSE. Peak paleotemperatures estimated with Raman spectra of organic matter increase strongly across the southern, Tertiary portion of the belt, in tandem with the development of a steeply dipping metamorphic cleavage. Near the southern tip of Ashizuri Peninsula, the unconformity between accreted strata and fore-arc basin, present along the whole belt, corresponds to a large paleotemperature gap, supporting the occurrence of a major collision in Early Miocene. This tectonic event occurred before the magmatic event that affected the whole belt at 15 Ma. The associated shortening was accommodated in two opposite modes, either localized on regional-scale faults such as the Nobeoka Tectonic Line in Kyushu or distributed through the whole belt as in Shikoku. The reappraisal of this collision leads to reinterpret large-scale seismic refraction profiles of the margins, where the unit underlying the modern accretionary prism is now attributed to an older package of deformed and accreted sedimentary units belonging to the Shimanto belt. When integrated into reconstructions of Philippine Sea Plate motion, the collision corresponds to the oblique collision of a paleo Izu-Bonin-Mariana Arc with Japan in Early Miocene.

  4. The Origin of Tholeiitic and Calc-Alkaline Trends in Arc Magmas

    NASA Astrophysics Data System (ADS)

    Luffi, P. I.; Lee, C.

    2012-12-01

    It has long been recognized that tholeiitic (TH, high-Fe/Mg) and calc-alkaline (CA, low-Fe/Mg) magmatic series define the two most important igneous differentiation trends shaping Earth's crust. While oceanic crust formation at mid-ocean ridges is typically confined to a TH trend, arc magmatism at convergent margins, considered to significantly contribute to continent formation, generates both TH and CA trends. Thus, the origin of these trends - a key issue to understanding how continental crust forms - is matter of ongoing debate. Prevalent factors thought to contribute to the TH-CA duality are: 1) redox conditions (oxygen fugacity, fO2) and H2O contents in magmas, which control the onset and abundance of high-Fe/Mg oxide mineral fractionation; 2) crystallization depths that regulate the fractionating solid assemblage and thereby the solid/liquid Kd(Fe-Mg). Relying on an extensive geochemical dataset of modern arc volcanics and thermodynamic phase equilibria modeling, here we examine the validity and relative importance of these factors in arc petrogenesis. First, to discriminate igneous rocks more efficiently, we formulate an improved CA/TH index solely based on FeO-MgO systematics. We then confirm on a quantitative basis that, on regional scales, arcs formed on thick crust tend to be more calk-alkaline than those emplaced on thinner crust are, and show that the effect of fO2 on the CA/TH index in arc magmas is more significant than that of H2O. Importantly, we demonstrate that CA trends typical for continental arcs only form when crystal fractionation is accompanied by the assimilation of oxidized crustal components; in the absence of buffering oxidized assimilants fractionating magmas follow a TH trend more common in island arcs, irrespective of their H2O content and initial fO2 level. We find that high-pressure fractionation of amphibole and garnet in arc magmas occurs too late to have a significant influence on the CA/TH index; in addition, garnet-melt and

  5. Some fundamental questions about the evolution of the Sea of Japan back-arc

    NASA Astrophysics Data System (ADS)

    Van Horne, A.; Sato, H.; Ishiyama, T.

    2016-12-01

    The Japanese island arc separated from Asia through the rifting of an active continental margin, and the opening of the Sea of Japan back-arc, in the middle Miocene. Due to its complex tectonic setting, the Sea of Japan back-arc was affected by multiple external events contemporary with its opening, including a plate reorganization, the opening of at least two other nearby back-arcs (Shikoku Basin and Okhotsk Sea/Kuril Basin), and two separate arc-arc collisions, involving encroachment upon Japan of the Izu-Bonin and Kuril arcs. Recent tectonic inversion has exposed entire sequences of back-arc structure on land, which remain virtually intact because of the short duration of inversion. Japan experiences a high level of seismic activity due to its position on the overriding plate of an active subduction margin. Continuous geophysical monitoring via a dense nationwide seismic/geodetic network, and a program of controlled-source refraction/wide-angle reflection profiling, directed towards earthquake hazard mitigation, have made it the repository of a rich geophysical data set through which to understand the processes that have shaped back-arc development. Timing, structural evolution, and patterns of magmatic activity during back-arc opening in the Sea of Japan were established by earlier investigations, but fundamental questions regarding back-arc development remain outstanding. These include (1) timing of the arrival of the Philippine Sea plate in southwest Japan, (2) the nature of the plate boundary prior to its arrival, (3) the pre-rift location of the Japanese island arc when it was attached to Asia, (4) the mechanism of back-arc opening (pull-apart or trench retreat), (5) the speed of opening, (6) simultaneous or sequential development of the multi-rift system, (7) the origin of the anomalously thick Yamato Basin ocean crust, and (8) the pattern of concentrated deformation in the failed-rift system of the eastern Sea of Japan since tectonic inversion. Resolving

  6. 21 CFR 876.5320 - Nonimplanted electrical continence device.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Nonimplanted electrical continence device. 876... Nonimplanted electrical continence device. (a) Identification. A nonimplanted electrical continence device is a device that consists of a pair of electrodes on a plug or a pessary that are connected by an electrical...

  7. 21 CFR 876.5320 - Nonimplanted electrical continence device.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Nonimplanted electrical continence device. 876... Nonimplanted electrical continence device. (a) Identification. A nonimplanted electrical continence device is a device that consists of a pair of electrodes on a plug or a pessary that are connected by an electrical...

  8. 21 CFR 876.5320 - Nonimplanted electrical continence device.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Nonimplanted electrical continence device. 876... Nonimplanted electrical continence device. (a) Identification. A nonimplanted electrical continence device is a device that consists of a pair of electrodes on a plug or a pessary that are connected by an electrical...

  9. 21 CFR 876.5320 - Nonimplanted electrical continence device.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Nonimplanted electrical continence device. 876... Nonimplanted electrical continence device. (a) Identification. A nonimplanted electrical continence device is a device that consists of a pair of electrodes on a plug or a pessary that are connected by an electrical...

  10. Sediment characteristics and provenance of the Taiwan Shoal in the southern Taiwan Strait

    NASA Astrophysics Data System (ADS)

    Koo, W. S.; Lin, A. T.; Kuo, L. W.; Lee, Y. H.

    2016-12-01

    The Taiwan Shoal in the southern Taiwan Strait exhibits a lobe-shaped shallow water area, with a depth less than around 40 m and an area approximately of 13,000 km2. The Shoal consists of relict sediments remnant from deltaic deposits during the last glacial period and associated with the paleo-Min River. We collected seafloor sediments in and around the Taiwan Shoal to study the sediment characteristics and provenance of the Shoal as well as Taiwanese river sediments to characterize sediment sourced from southern Taiwan. Our results help to understand possible sediment delivery pathways in a source-to-sink context from the southern Taiwan Strait to the northern South China Sea. The method of X-ray diffraction is used to identify mineral compositions for muds and mineral compositions are examined under polarized microscope for sands. Zircon grains are separated from heavy minerals for U-Pb dating in order to understand the sediment source terranes. Sediments of the Taiwan Shoal are mostly tawny-colored, medium to coarse-grained sands with abundant shell fragments and shallow-water benthic foraminifera. Sediments to the south of the Taiwan Shoal and in the outer shelf consist of dark brown-colored and fine-grained sands with rare shell fragments. Siliciclastic compositions of the Taiwan Shoal sediments are mostly quartz. The second abundant composition is rock fragments with more occurrences near the Chinese coastline and the Penghu archipelago. Slate fragments are found to occur near Taiwan, especially in the Penghu Channel area. Clay minerals from the Penghu Channels and south of the Taiwan Shoal are dominated by illite and chlorite with minor smectite and kaolinite. The sediment colors and mineral species are very different for the sediments of the Taiwan Shoal and outer shelf, revealing that these two areas featuring different oceanographic processes and sediment provenance.

  11. Taiwan`s experience with municipal waste recycling

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lee, C.H.

    1998-12-31

    Currently, each person on the average produces 1.15 kg of the municipal waste per day and a total of 9 million metric tons were generated annually in Taiwan. The disposal of such a huge amount of waste presents tremendous challenge for the island due to the scarcity of landfills and incineration facilities available locally. EPA of Taiwan, R.O.C. thus takes an active role in promoting waste recycling to reduce the garbage produced in municipalities. In order to efficiently utilize the government`s human and financial resources used in recycling, started from January 31, 1989, EPA has mandated the producer responsibility recyclingmore » program for several designated post-consumer products such as PET, PVC bottles, scrap tires, scrap motor vehicles, etc. Producer responsibility recycling program specifies that the manufacturers, importers and sellers of these designated products have the responsibility to retrieve their products and recycle them properly. Several negative effects have been encountered while the implementation of this producer responsibility recycling program in Taiwan which resulted in a modification of this recycling program recently. This paper presents the encountered experiences on the implementation of municipal waste recycling program in Taiwan.« less

  12. Continent-continent collision in southern Alps studied

    NASA Astrophysics Data System (ADS)

    Henyey, T.; Stern, T.; Molnar, P.

    Developing a scientific plan for geophysical study of the Southern Alps, New Zealand, was the focus of a workshop convened from April 5 to 10 at Victoria University in Wellington, New Zealand. The study is a cooperative effort between U.S. and New Zealand scientists. The workshop was convened by F. Davey, Institute for Geological and Nuclear Sciences, Wellington, New Zealand; T. Stern, Victoria University, Wellington; and T. Henyey and D. Okaya, University of Southern California, Los Angeles. It was sponsored by the National Science Foundation Continental Dynamics Program with assistance from the New Zealand Institute of Geological and Nuclear Sciences and Victoria University.

  13. Long arc stabilities with various arc gas flow rates

    NASA Astrophysics Data System (ADS)

    Maruyama, K.; Takeda, K.; Sugimoto, M.; Noguchi, Y.

    2014-11-01

    A new arc torch for use in magnetically driven arc device was developed with a commercially available TIG welding arc torch. The torch has a water-cooling system to the torch nozzle and has a nozzle nut to supply a swirling-free plasma gas flow. Its endurance against arc thermal load is examined. Features of its generated arc are investigated.

  14. Rotations in the actively colliding Finisterre Arc Terrane: paleomagnetic constraints on Plio-Pleistocene evolution of the South Bismarck microplate, northeastern Papua New Guinea

    NASA Astrophysics Data System (ADS)

    Weiler, P. D.; Coe, R. S.

    2000-01-01

    We report paleomagnetic results from 12 Plio-Pleistocene localities in the actively colliding Finisterre Arc Terrane of northeastern Papua New Guinea (PNG). Calcareous, hemipelagic cover rocks possess a stable, syn-collisional remagnetization indicating a clockwise rotation of the colliding terrane through about 40° in post-Miocene time. A decrease in paleomagnetic declination anomalies as a function of along-strike distance in the Finisterre Arc Terrane, analyzed by our preferred model of a linear remagnetization and a migrating Euler pole, suggests an average rotation rate of 8° Ma -1, in good agreement with the instantaneous rate from global positioning system geodesy. Thus, we propose that this rotation results from a coherent, rigid-body rotation of the Finisterre Terrane rather than from sequential docking of independently colliding blocks of the terrane. Moreover, we conclude that these paleomagnetic declinations result mainly from South Bismarck Plate motion, and not decoupled rotation of the crustal terrane independent of the underlying lithosphere. We examine models of a syn-collisional remagnetization with both fixed and migrating Euler poles of South Bismarck/Australia plate relative motion, and suggest that the Euler pole describing South Bismarck Plate motion has migrated southwestward to its present location on the collision suture in response to the propagating collision. This plate kinematic model agrees with the variability in depth of the seismogenic slab beneath the collision zone. Our best-fit model of pole migration describes South Bismarck/Australia relative motion producing a highly oblique collision in its early stages, with the Finisterre Arc Terrane converging along a left-lateral Ramu-Markham suture, gradually changing to the nearly orthogonal convergence observed today.

  15. Critical Thinking Disposition of Nurse Practitioners in Taiwan.

    PubMed

    Hsu, Hsiu-Ying; Chang, Shu-Chen; Chang, Ai-Ling; Chen, Shiah-Lian

    2017-09-01

    Critical thinking disposition (CTD) is crucial for nurse practitioners who face complex patient care scenarios. This study explored the CTD of nurse practitioners and related factors. The study was a cross-sectional descriptive design. A purposive sample was recruited from a medical center and its hospital branches in central Taiwan. A structured questionnaire was used to collect data from 210 nurse practitioners. The participants obtained the highest average score on systematicity and analyticity. CTD had a significant positive correlation with fundamental knowledge readiness, professional knowledge readiness, and confidence in making clinical decisions. Professional knowledge readiness, education level, and on-the-job training predicted the score of the participants on overall CTD. On-the-job training and education level may influence the CTD of nurse practitioners. Providing formal or on-the-job continuing education training to nurse practitioners may help enhance their CTD. J Contin Educ Nurs. 2017;48(9):425-430. Copyright 2017, SLACK Incorporated.

  16. Collision-induced post-plateau volcanism: Evidence from a seamount on Ontong Java Plateau

    NASA Astrophysics Data System (ADS)

    Hanyu, Takeshi; Tejada, Maria Luisa G.; Shimizu, Kenji; Ishizuka, Osamu; Fujii, Toshiyuki; Kimura, Jun-Ichi; Chang, Qing; Senda, Ryoko; Miyazaki, Takashi; Hirahara, Yuka; Vaglarov, Bogdan S.; Goto, Kosuke T.; Ishikawa, Akira

    2017-12-01

    Many seamounts on the Ontong Java Plateau (OJP) occur near the Stewart Arch, a topographic high that extends parallel to the North Solomon Trench along the southern margins of the plateau. Despite the thick sediment cover, several volcanic cones with strong acoustic reflection were discovered on the submarine flank of the Nuugurigia Seamount. From such volcanic cones, basalts were successfully sampled by dredging. Radiometric dating of basalts and ferromanganese encrustation indicate eruption age of 20-25 Ma, significantly younger than the 122 Ma main OJP plateau and post-plateau basalts. The age range coincides with the collision of the OJP with the Solomon Arc. The Nuugurigia basalts geochemically differ from any other rocks sampled on the OJP so far. They are alkali basalts with elevated Sr, low Zr and Hf, and Enriched Mantle-I (EMI)-like isotopic composition. Parental magmas of these alkali basalts may have formed by small-degree melting of peridotitic mantle impregnated with recycled pyroxenite material having enriched geochemical composition in the OJP's mantle root. We conclude that small-volume alkali basalts from the enriched mantle root migrated through faults or fractures caused by the collision along the Stewart Arch to form the seamount. Our results suggest that the collision of the OJP with the Solomon arc played an important role in the origin of similar post-plateau seamounts along the Stewart Arch.

  17. The pursuit of colostomy continence.

    PubMed

    Roberts, D J

    1997-03-01

    The lifelong management required by patients with permanent colostomies leads to dissatisfaction with quality of life for many. Through the years, multiple techniques have been attempted to improve the quality of life by pursuing colostomy continence. Such endeavors include surgical interventions, nonsurgical devices and management, and behavior modification techniques. Efforts in research and development continue, and the desire to achieve continence of the stoma remain common cause among persons with on ostomy and those involved in their care.

  18. Precise seismic velocity structure beneath the Hokkaido corner, northern Japan: Arc-arc collision and the 1970 M 6.7 Hidaka region earthquake and the 1982 M 7.1 Urakawa-oki earthquake

    NASA Astrophysics Data System (ADS)

    Kita, S.; Hasegawa, A.; Nakajima, J.; Okada, T.; Matsuzawa, T.; Katsumata, K.

    2011-12-01

    eastern edge fault groups. The western boundary of this small high-V zone corresponds to the fault plane of the 1982 Mj 7.1 Urakawa-oki earthquake [Moriya et al, 1983]. Both of the hanging walls of the fault planes of two M 7 class big earthquakes have anomalously high velocities, while both of the foot walls have low velocities. A considerable number of earthquakes, including aftershocks of these two big earthquake and, occur in the broad low-V zone at depths of 0-80 km (even at depths of the mantle wedge), whereas seismicity is very low in other areas. These present observations provide important in formation to deepen our understanding of the ongoing arc-arc collision process and earthquake generation mechanism in the Hokkaido corner.

  19. Petrogenesis and tectonic implications of an Early Jurassic magmatic arc from South to East China Seas

    NASA Astrophysics Data System (ADS)

    Zhang, L.; Xu, C.

    2017-12-01

    Granite and diorite samples by drilling in northeastern South China Sea (SCS) and southwestern East China Sea (ECS) contribute key information to understanding tectonic regime of South China Block in Jurassic time. SIMS and LA-ICPMS U-Pb zircon analyses yield ages ranging from 195±2 Ma to 198±1 Ma for samples from well LF3511 in SCS, and an age of 187±1 Ma for the sample from well ESC635 in ECS. They are low temperature I-type granitoids with strongly enriched fluid-mobile elements and depleted Nb-Ta features, indicating subduction arc-related magmatism in their origin. Sr-Nd isotopic compositions for samples from SCS ((87Sr/86Sr)i=0.705494-0.706623, ɛNdt=-0.9 to +2.2) and sample from ECS ((87Sr/86Sr)i=0.705200, ɛNdt=1.1) suggest an affinity with evolved mantle-derived melts. The granitoids found from NE SCS, SE Taiwan to the SW ECS could spatially define an Early Jurassic NE-SW-trending Dongsha-Talun-Yandang low-temperature magmatic arc zone along the East Asian continental margin, paired with Jurassic accretionary complexes exposed in SW Japan, E Taiwan to the W Philippines. Its geodynamic context is associated with oblique subduction of the paleo-Pacific slab beneath Eurasia, as a mechanism responsible for early Jurassic lithospheric extension with magmatism in the South China Block.

  20. The gravitational extension in the Central Range of Taiwan induced by the instability of intrinsic buoyancy

    NASA Astrophysics Data System (ADS)

    Lo, C.; Kuo-Chen, H.; Hsu, S.

    2013-12-01

    The active Taiwan orogen is situated in the tectonic convergence between the Philippine Sea plate and Eurasian passive margin. The thick crust under the Central Range of Taiwan was demonstrated by the results from the TAIGER project during 2004-2009. The results show that the deepest moho (~60 km thickness) is located at the eastern flank of the Central Range, while the averaged crust thickness is over 50 km beneath the whole mountain ranges from south to north. Physically the thickened crust provides an excess of the gravitational potential energy (GPE) with respect to the vicinity, implying that the Central Range itself behaves intrinsic extension stress environment. However, due to limited geophysical information such a phenomenon was not well evaluated and not considered to be one of the important factors for the Taiwan mountain building process. In this study, we calculate the GPE of the whole Taiwan region from recent Vp tomography via seismic velocity-rock density empirical relationship. From the catalogue of the earthquake focal mechanisms of Broadband Array in Taiwan for Seismology (BATS), a quite number of extensional earthquakes are distributed in the 10-40 km deep in and around the Central Range, where the crustal potential energy is distinctively higher. Besides, the principal axes of these extensional earthquakes are mainly normal to the large gradient of crust ΔGPE at the edge of Central Range. Accordingly, we conclude that the Central Range is undergoing the mountain building by the strong plate collision; meanwhile it is also bearing the gravitationally instable extension due to inherent buoyant thickening crust.

  1. Taiwan Regulation of Biobanks.

    PubMed

    Fan, Chien-Te; Hung, Tzu-Hsun; Yeh, Chan-Kun

    2015-01-01

    This paper introduces legal framework and governance structure in relation to the management and development of biobanks in Taiwan. At first, we briefly describe Taiwan's population, political system and health care system. Secondly, this research introduces biobanking framework of Taiwan including 25 biobanks established with the approval of the Ministry of Health and Welfare. In those biobanks, "Taiwan Biobank" is the first and the largest government-supported biobank which comprises population-based cohort study and disease- oriented study. Since the collection of information, data, and biological specimen of biobanks often involve highly sensitive personal information, in the legal framework of Taiwan, there is a specific regulation, "Human Biobank Management Act" (HBMA), which plays an important role in regulating biobanks in Taiwan. HBMA, the Personal Information Act and other regulations constitute a comprehensive legal and regulatory privacy framework of biobanks. Through the introduction and analysis of the current legal framework applicable to biobanks, we found that there are several challenges that need to be solved appropriately that involve duplicate review systems, the obstacles in the international collaboration, and data sharing between biobanks in Taiwan. © 2015 American Society of Law, Medicine & Ethics, Inc.

  2. Rapid subsidence along the Kerama Gap on the Ryukyu Arc, northwestern Pacific

    NASA Astrophysics Data System (ADS)

    Arai, K.; Inoue, T.; Sato, T.

    2017-12-01

    The Ryukyu Arc, which extend for over 1200 km along the east coast of Asia from Kyushu to Taiwan, and the associated Ryukyu Trench, are products of the subduction of the Philippine Sea Plate beneath the Eurasian Plate. The Okinawa Trough, a back-arc basin located landward of the Ryukyu Arc, formed in the Late Miocene (Gungor et al., 2012) or the Late Pliocene-Early Pleistocene (Sibuet et al., 1998); its formation is a key geologic event associated with complex tectonic movements and changes in the topographic configuration of the Ryukyu Arc. Geological Survey of Japan (GSJ), AIST has started the marine geological mapping project around the Ryukyu Arc since the 2008 FY. Multi channel (16 ch) high-resolution seismic profiles were acquired during these cruises by the GI-gun (355cu. inch) or the Cluster-gun (30+30 cu. inch) systems. Our survey area around the Okinawa Island is characterized by the shelf, upper forearc slope and slope to the back-arc basin. Seismic reflections of shelf and the upper forearc slope show a distinct reflector which may represent erosional unconformable surface. The distinct reflector had mainly tilted southeastward and was overlain by the stratified sediments. No obvious deformation such as the fold and faults parallel to the Ryukyu Trench axis was found under the upper forearc slope. In contrast, some active faults which were perpendicular to the Ryukyu Trench axis (NW-SE direction) were observed. The most conspicuous normal faults system under the Kerama Gap located on southwest off the Okinawa Island is formed. We will present the seismic profiles around the Kerama Gap. Seismic profiles show a distinct, irregularly undulated reflector as an acoustic basement around the Kerama Gap. The acoustic basement is overlain by the clear stratified sediments. Many normal faults developed NW-SE direction cut the stratified sediments and are deformed the subsurface along the Kerama Gap. Subsidence of the Kerama Gap resulted from large vertical

  3. Taiwan: Background Notes Series.

    ERIC Educational Resources Information Center

    Reams, Joanne Reppert

    Concise background information on Taiwan is provided. The publication begins with a profile of Taiwan, discussing the people, geography, political establishment, and economy. A map of the country is provided. The bulk of the publication then provides more detailed information on Taiwan's people, geography, history, administration, political…

  4. [Pseudo-continent perineal colostomy. Results and techniques].

    PubMed

    Lasser, P; Dubé, P; Guillot, J M; Elias, D

    1997-09-01

    This prospective study was conducted to assess functional results obtained after pseudo-continent perineal colostomy using the Schmidt procedure. Functional outcome was assessed in 40 patients who had undergone amputation of the rectum for cancer and pseudo-continent perineal colostomy reconstruction between 1989 and 1995 in our institution. The cancer pathology, operative procedure and post-operative care were noted. Morbidity, functional outcome and degree of patient satisfaction were recorded. Mean follow-up was 45 months (18-87) in 100% of the patients. There were no operative deaths. Twenty patients had post-operative complications and 2 patients required early conversion to definitive abdominal colostomy due to severe perineal complications. Function outcome showed normal continence in 4 patients, air incontinence in 23, occasional minimal leakage in 9 and incontinence requiring iliac colostomy in 2. Eighty-six percent of the patients were highly satisfied or satisfied with their continence capacity. Pseudo-continent perineal colostomy is a reliable technique which can be proposed as an alternative to left iliac colostomy after amputation of the rectum for cancer if a rigorous procedure is applied: careful patient selection, informed consent, rigorous surgical procedure, daily life-long irrigation of the colon.

  5. Low-latitude arc–continent collision as a driver for global cooling

    PubMed Central

    Jagoutz, Oliver; Macdonald, Francis A.; Royden, Leigh

    2016-01-01

    New constraints on the tectonic evolution of the Neo-Tethys Ocean indicate that at ∼90–70 Ma and at ∼50–40 Ma, vast quantities of mafic and ultramafic rocks were emplaced at low latitude onto continental crust within the tropical humid belt. These emplacement events correspond temporally with, and are potential agents for, the global climatic cooling events that terminated the Cretaceous Thermal Maximum and the Early Eocene Climatic Optimum. We model the temporal effects of CO2 drawdown from the atmosphere due to chemical weathering of these obducted ophiolites, and of CO2 addition to the atmosphere from arc volcanism in the Neo-Tethys, between 100 and 40 Ma. Modeled variations in net CO2-drawdown rates are in excellent agreement with contemporaneous variation of ocean bottom water temperatures over this time interval, indicating that ophiolite emplacement may have played a major role in changing global climate. We demonstrate that both the lithology of the obducted rocks (mafic/ultramafic) and a tropical humid climate with high precipitation rate are needed to produce significant consumption of CO2. Based on these results, we suggest that the low-latitude closure of ocean basins along east–west trending plate boundaries may also have initiated other long-term global cooling events, such as Middle to Late Ordovician cooling and glaciation associated with the closure of the Iapetus Ocean. PMID:27091966

  6. Expanding sheath in a bounded plasma in the context of the post-arc phase of a vacuum arc

    NASA Astrophysics Data System (ADS)

    Sarrailh, P.; Garrigues, L.; Hagelaar, G. J. M.; Sandolache, G.; Rowe, S.; Jusselin, B.; Boeuf, J. P.

    2008-01-01

    A numerical model of sheath expansion and plasma decay in a bounded plasma subjected to a linearly increasing voltage has been developed. Numerical results obtained with a hybrid-MB model (Maxwell-Boltzmann electrons, particle ions and Poisson's equations) are compared with analytical theory and results from particle-in-cell (PIC) simulations. The hybrid-MB model is similar to models used for plasma immersion ion implantation except that plasma decay due to particle losses to the electrodes is taken into account. The comparisons with more accurate and much more time consuming PIC models show that the hybrid-MB model provides a very satisfactory description of the sheath expansion and plasma decay even for conditions where the grid spacing is much larger than the Debye length. The model is used for high plasma density conditions, corresponding to the post-arc phase of a vacuum arc circuit breaker where a vacuum gap is subject to a transient recovery voltage (TRV) after it has ceased to sustain a vacuum arc. The results show that the plasma sheath expansion is subsonic under these conditions, and that the plasma starts to decay exponentially after two rarefaction waves from the cathode and anode merge in the centre of the gap. A parametric study also shows the strong influence of the TRV rise rate and initial plasma density on the plasma decay time and on the ion current collected by each electrode. The effect of collisions between charged particles and metal atoms resulting for the electrode evaporation is also discussed.

  7. Using spatial analysis to demonstrate the heterogeneity of the cardiovascular drug-prescribing pattern in Taiwan

    PubMed Central

    2011-01-01

    Background Geographic Information Systems (GIS) combined with spatial analytical methods could be helpful in examining patterns of drug use. Little attention has been paid to geographic variation of cardiovascular prescription use in Taiwan. The main objective was to use local spatial association statistics to test whether or not the cardiovascular medication-prescribing pattern is homogenous across 352 townships in Taiwan. Methods The statistical methods used were the global measures of Moran's I and Local Indicators of Spatial Association (LISA). While Moran's I provides information on the overall spatial distribution of the data, LISA provides information on types of spatial association at the local level. LISA statistics can also be used to identify influential locations in spatial association analysis. The major classes of prescription cardiovascular drugs were taken from Taiwan's National Health Insurance Research Database (NHIRD), which has a coverage rate of over 97%. The dosage of each prescription was converted into defined daily doses to measure the consumption of each class of drugs. Data were analyzed with ArcGIS and GeoDa at the township level. Results The LISA statistics showed an unusual use of cardiovascular medications in the southern townships with high local variation. Patterns of drug use also showed more low-low spatial clusters (cold spots) than high-high spatial clusters (hot spots), and those low-low associations were clustered in the rural areas. Conclusions The cardiovascular drug prescribing patterns were heterogeneous across Taiwan. In particular, a clear pattern of north-south disparity exists. Such spatial clustering helps prioritize the target areas that require better education concerning drug use. PMID:21609462

  8. Strike-slip tectonics within the northernmost Philippine Sea plate in an arc-continent collisional setting

    NASA Astrophysics Data System (ADS)

    Gong, Wei; Jiang, Xiaodian; Guo, Yufan; Xing, Junhui; Li, Congying; Sun, Yang

    2017-09-01

    The geological processes in the northernmost Philippine Sea plate, which is bounded by the Suruga and Sagami troughs, are a typical example of an active collision zone. We attempt to illustrate the stress field through seismic estimations and geodetic analysis and propose the kinematic mode of the northernmost tip of the Philippine Sea plate. Seven events (M ≥ 4.0) are chosen for waveform inversion by the ISOLA software to distinguish the stress field. In particular, six of the chosen events, which exhibit strike-slip motion, are distributed in the eastern area, where few focal mechanisms have been reported by previous studies. According to the available focal mechanisms, strike-slip faults with similar P and T axes are widely distributed in the study area. The stress inversion suggests that the northern area is characterized by a NW-SE compression and a NE-SW extension stress regime, although some spatial differences exist. As indicated by an analysis of the geodesy, epicenters, focal mechanisms, gravity anomalies and velocity structure, the deformation in the northernmost tip is mainly accommodated by several conjugate strike-slip fault systems with steep dips that center on the Izu volcanic line. Generally, the maximum principal stress of the kinematics is derived from the collision between the Philippine Sea plate and Central Japan. Because of the different subduction angles, rates and directions of the down-going plate, diverging slab-pull forces along the Suruga and Sagami troughs may be causing the NE-NNE extension in most of the areas that are bounded by the two troughs. The extension propagates southwards along the Izu volcanic line and reaches the area adjacent to Miyake-jima.

  9. [The continent ileostomy--indication and results].

    PubMed

    Säuberli, H; Akovbiantz, A; Hahnloser, P

    1982-01-01

    Proctocolectomy with conventional ileostomy cures patients with severe ulcerative colitis, however ileostomy appliances had to be worn for the rest of their lives. The continent ileostomy as devised by Kock provides the patient with an intraabdominal ileal reservoir and a valve constructed by invaginating the efferent ileal segment into the reservoir. The patient empties his reservoir 2 to 3 times a day by inserting a catheter through the valve. Our experience with 45 patients is reported. In most cases the continent ileostomy was constructed as a second procedure after proctocolectomy. The construction of a continent ileostomy as a secondary procedure can be recommended in patients with proctocolectomy. It offers patients a life situation differing only insignificantly from that of normal persons.

  10. Effectiveness of a new standardised Urinary Continence Physiotherapy Programme for community-dwelling older women in Hong Kong.

    PubMed

    Leong, B S; Mok, Nicola W

    2015-02-01

    To examine the effectiveness of a standardised Urinary Continence Physiotherapy Programme for older Chinese women with stress, urge, or mixed urinary incontinence. A controlled trial. Six elderly community health centres in Hong Kong. A total of 55 women aged over 65 years with mild-to-moderate urinary incontinence. Participants were randomly assigned to the intervention group (n=27) where they received eight sessions of Urinary Continence Physiotherapy Programme for 12 weeks. This group received education about urinary incontinence, pelvic floor muscle training with manual palpation and verbal feedback, and behavioural therapy. The control group (n=28) was given advice and an educational pamphlet on urinary incontinence. There was significant improvement in urinary symptoms in the intervention group, especially in the first 5 weeks. Compared with the control group, participants receiving the intervention showed significant reduction in urinary incontinence episodes per week with a mean difference of -6.4 (95% confidence interval, -8.9 to -3.9; t= -5.3; P<0.001) and significant improvement of quality of life with a mean difference of -3.93 (95% confidence interval, -5.08 to -2.78; t= -6.9; P<0.001) measured by Incontinence Impact Questionnaire Short Form modified Chinese (Taiwan) version. The subjective perception of improvement, measured by an 11-point visual analogue scale, was markedly better in the intervention group (mean, 8.7; standard deviation, 1.0; 95% confidence interval, 8.4-9.1) than in the control group (mean, 1.4; standard deviation, 0.7; 95% confidence interval, 1.2-1.7; t=33.9; P<0.001). The mean treatment satisfaction in the intervention group was 9.5 (standard deviation, 0.8) as measured by an 11-point visual analogue scale. This study demonstrated that the Urinary Continence Physiotherapy Programme was effective in alleviating urinary symptoms among older Chinese women with mild-to-moderate heterogeneous urinary incontinence.

  11. Prostate volumetric‐modulated arc therapy: dosimetry and radiobiological model variation between the single‐arc and double‐arc technique

    PubMed Central

    Jiang, Runqing

    2013-01-01

    This study investigates the dosimetry and radiobiological model variation when a second photon arc was added to prostate volumetric‐modulated arc therapy (VMAT) using the single‐arc technique. Dosimetry and radiobiological model comparison between the single‐arc and double‐arc prostate VMAT plans were performed on five patients with prostate volumes ranging from 29−68.1 cm3. The prescription dose was 78 Gy/39 fractions and the photon beam energy was 6 MV. Dose‐volume histogram, mean and maximum dose of targets (planning and clinical target volume) and normal tissues (rectum, bladder and femoral heads), dose‐volume criteria in the treatment plan (D99% of PTV; D30%,D50%,V17Gy and V35Gy of rectum and bladder; D5% of femoral heads), and dose profiles along the vertical and horizontal axis crossing the isocenter were determined using the single‐arc and double‐arc VMAT technique. For comparison, the monitor unit based on the RapidArc delivery method, prostate tumor control probability (TCP), and rectal normal tissue complication probability (NTCP) based on the Lyman‐Burman‐Kutcher algorithm were calculated. It was found that though the double‐arc technique required almost double the treatment time than the single‐arc, the double‐arc plan provided a better rectal and bladder dose‐volume criteria by shifting the delivered dose in the patient from the anterior–posterior direction to the lateral. As the femoral head was less radiosensitive than the rectum and bladder, the double‐arc technique resulted in a prostate VMAT plan with better prostate coverage and rectal dose‐volume criteria compared to the single‐arc. The prostate TCP of the double‐arc plan was found slightly increased (0.16%) compared to the single‐arc. Therefore, when the rectal dose‐volume criteria are very difficult to achieve in a single‐arc prostate VMAT plan, it is worthwhile to consider the double‐arc technique. PACS number: 87.55.D‐, 87.55.dk, 87.55.K

  12. Structural features related to the volcanic gases in Southern Okinawa Trough

    NASA Astrophysics Data System (ADS)

    Wang, H. F.; Hsu, S. K.; Tsia, C. H.; Chen, S. C.; Wu, M. F.

    2016-12-01

    The Okinawa Trough is a rifted back-arc basin, heavily sedimented and formed in an intracontinental rift zone behind the Ryukyu trench-arc system. The Southern Okinawa Trough (SOT) east of Taiwan is the place where post-collisional extension happened. The collision moved southwestward and the Ryukyu trench-arc extension westward, Arc volcanism is dominant in the Northern Ryukyu volcanic arc and back-arc volcanism in the Southern Okinawa Trough. Marine geophysical data including side-scan sonar (SSS), sub-bottom profiler (SBP) and echo sounder system (EK60) data are used in this study. Active fluid activities out of seafloor are obvious from various images observed on these data, such as gas plumes. These hydrothermal vents have been located at a water depth of 1400 m. Our preliminary results show that gas seepage structures appear in the location where is a week zone, such as a normal fault in the slope. The hydrothermal activity within the Okinawa Trough is associated with volcanism located in rift zones in the Southern Okinawa Trough. However, the origin of the submarine hydrothermal fluids within the Okinawa Trough is diverse with contributions from volcanic, sedimentary and magmatic sources, needed further investigations.

  13. The warming trend of ground surface temperature in the Choshui Alluvial Fan, western central Taiwan

    NASA Astrophysics Data System (ADS)

    Chen, W.; Chang, M.; Chen, J.; Lu, W.; Huang, C. C.; Wang, Y.

    2013-12-01

    Heat storage in subsurface of the continents forms a fundamental component of the global energy budget and plays an important role in the climate system. Several researches revealed that subsurface temperatures were being increased to 1.8-2.8°C higher in mean ground surface temperature (GST) for some Asian cities where are experiencing a rapid growth of population. Taiwan is a subtropic-tropic island with densely populated in the coastal plains surrounding its mountains. We investigate the subsurface temperature distribution and the borehole temperature-depth profiles by using groundwater monitoring wells in years 2000 and 2010. Our data show that the western central Taiwan plain also has been experiencing a warming trend but with a higher temperatures approximately 3-4 °C of GST during the last 250 yrs. We suggest that the warming were mostly due to the land change to urbanization and agriculture. The current GSTs from our wells are approximately 25.51-26.79 °C which are higher than the current surface air temperature (SAT) of 23.65 °C. Data from Taiwan's weather stations also show 1-1.5 °C higher for the GST than the SAT at neighboring stations. The earth surface heat balance data indicate that GST higher than SAT is reasonable. More researches are needed to evaluate the interaction of GST and SAT, and how a warming GST's impact to the SAT and the climate system of the Earth.

  14. ARC Operations

    Science.gov Websites

    Walter Bryzik Government Leader (1994-2007) Dr. Walter Bryzik ARC Director (2002-2009) Prof. Dennis Assanis Dennis Assanis Zoran Filipi ARC Assistant Director (2002-2009) ARC Deputy Director (2009-2011

  15. Stratigraphic response and mammalian dispersal during initial India-Asia collision: Evidence from the Ghazij Formation, Balochistan, Pakistan

    NASA Astrophysics Data System (ADS)

    Clyde, William C.; Khan, Intizar H.; Gingerich, Philip D.

    2003-12-01

    Initial continental collision between India and Asia is thought to have caused significant changes to global climate and biota, yet its timing and biogeographic consequences are uncertain. Structural and geophysical evidence indicates initial collision during the early Paleogene, but sedimentary evidence of this has been controversial owing to the intense deformation and metamorphism along the suture zone. Modern orders of mammals that appeared abruptly on northern continents coincident with the global warming event marking the Paleocene-Eocene boundary are hypothesized to have originated on the Indian subcontinent, but no relevant paleontological information has been available to test this idea. Here we present new paleomagnetic, sedimentologic, and paleontologic evidence to show that the lower Eocene Ghazij Formation of western Pakistan records continental sedimentation and mammalian dispersal associated with initial India-Asia collision. Our results are consistent with the initial collision occurring near the Paleocene-Eocene boundary, but modern orders of mammals appeared later in Indo-Pakistan and thus did not likely originate on the Indian subcontinent.

  16. 21 CFR 876.5030 - Continent ileostomy catheter.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Continent ileostomy catheter. 876.5030 Section 876.5030 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Therapeutic Devices § 876.5030 Continent ileostomy...

  17. The Loyalty—New Hebrides Arc collision: Effects on the Loyalty Ridge and basin system, Southwest Pacific (first results of the ZoNéCo programme)

    NASA Astrophysics Data System (ADS)

    Lafoy, Yves; Missegue, Francois; Cluzel, Dominique; Le Suave, Raymond

    1996-06-01

    The ZoNéCo 1 and 2 cruises of Ifremer's Research Vessel L'Atalante, collected new swath bathymetry and geophysical data over the southern and northern segments of the basins and ridges forming the Loyalty system. Between the two surveyed areas, previous studies found evidence for the resistance of the Loyalty Ridge to subduction beneath the New Hebrides trench near 22°S 169°E. On the subducted plate, except for seismicity related to the downbending of the Australian plate, recorded shallow seismicity is sparse within the Loyalty system (Ridge and Basin) where reliable focal mechanism solutions are almost absent. Swath bathymetry, seismic reflection and magnetic data acquired during the ZoNéCo 1 and 2 cruises revealed a transverse asymmetric morphology in the Loyalty system, and an along-strike horst and graben structure on the discontinuous Loyalty Ridge. South of 23°50'S and at 20°S, the two WSW-ENE-trending fault systems, respectively, sinistral and dextral, that crosscut the southern and northern segments of the Loyalty system, are interpreted as due to the early effects of collision with the New Hebrides Arc. A NNW-SSE trend, evident along the whole Loyalty system and on the island of New Caledonia, is interpreted as an inherited structural trend that may have been reactivated through flexure of the Australian lithospheric plate at the subduction zone. Overall then, the morphology, structure and evolution of the southern and northern segments of the Loyalty system probably result from the combined effects of the Australian plate lithospheric bulge, the active Loyalty-New Hebrides collision and the overthrust of the New Caledonian ophiolite.

  18. Taiwan Biobank: a project aiming to aid Taiwan's transition into a biomedical island.

    PubMed

    Fan, Chien-Te; Lin, Jui-Chu; Lee, Chung-His

    2008-02-01

    Essentially, the term 'biobank' can be defined in different ways. Taking the UK Biobank's experience as the main example, the Taiwan Biobank aims to collect the DNA of a large group of people on the population base and track their health and lifestyle for at least 10 years. It is hoped that the information collected, regarding the mechanisms underlying how genes and environmental factors interact with each other to make us ill, will benefit the society in various ways, including the exploration of a new generation of treatments, support to preventive medicine discovery and also the possible benefits for the promotion of evolving public health-related industries in Taiwan. However, the involvement of large-scale population base gene data collection also triggered serious ethical, legal and social issues. In Taiwan, the challenge is even more serious than for any other biobanking experiences that have occurred previously. Among all the ethical, legal and social issues, the convergence of aboriginal people protection provided under Taiwan's Constitution imposes on the research team an obligation to create an innovative Ethical & Legal Governance Framework adaptable to the unique social background of Taiwan, including a workable public consultation/communication mechanism. In early 2005, the creation of the 'Taiwan Biobank' has been included as a part of Taiwan's strategic development in promoting the country as an island of biomedicine. In this report, the ideology, the goals and special features, government strategy, visions and, in particular, the ethical, legal and social issue planning of the Taiwan Biobank will be briefly introduced and reviewed.

  19. Application of modified dynamic conformal arc (MDCA) technique on liver stereotactic body radiation therapy (SBRT) planning following RTOG 0438 guideline

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shi, Chengyu, E-mail: shicy1974@yahoo.com; Chen, Yong; Fang, Deborah

    2015-04-01

    Liver stereotactic body radiation therapy (SBRT) is a feasible treatment method for the nonoperable, patient with early-stage liver cancer. Treatment planning for the SBRT is very important and has to consider the simulation accuracy, planning time, treatment efficiency effects etc. The modified dynamic conformal arc (MDCA) technique is a 3-dimensional conformal arc planning method, which has been proposed for liver SBRT planning at our center. In this study, we compared the MDCA technique with the RapidArc technique in terms of planning target volume (PTV) coverage and sparing of organs at risk (OARs). The results show that the MDCA technique hasmore » comparable plan quality to RapidArc considering PTV coverage, hot spots, heterogeneity index, and effective liver volume. For the 5 PTVs studied among 4 patients, the MDCA plan, when compared with the RapidArc plan, showed 9% more hot spots, more heterogeneity effect, more sparing of OARs, and lower liver effective volume. The monitor unit (MU) number for the MDCA plan is much lower than for the RapidArc plans. The MDCA plan has the advantages of less planning time, no-collision treatment, and a lower MU number.« less

  20. [Spectra and thermal analysis of the arc in activating flux plasma arc welding].

    PubMed

    Chai, Guo-Ming; Zhu, Yi-Feng

    2010-04-01

    In activating flux plasma arc welding the welding arc was analyzed by spectra analysis technique, and the welding arc temperature field was measured by the infrared sensing and computer image technique. The distribution models of welding arc heat flow density of activating flux PAW welding were developed. The composition of welding arc affected by activated flux was studied, and the welding arc temperature field was studied. The results show that the spectral lines of argon atom and ionized argon atom of primary ionization are the main spectra lines of the conventional plasma welding arc. The spectra lines of weld metal are inappreciable in the spectra lines of the conventional plasma welding arc. The gas particle is the main in the conventional plasma welding arc. The conventional plasma welding arc is gas welding arc. The spectra lines of argon atom and ionized argon atom of primary ionization are intensified in the activating flux plasma welding arc, and the spectra lines of Ti, Cr and Fe elements are found in the activating flux plasma welding arc. The welding arc temperature distribution in activating flux plasma arc welding is compact, the outline of the welding arc temperature field is narrow, the range of the welding arc temperature distribution is concentrated, the welding arc radial temperature gradient is large, and the welding arc radial temperature gradient shows normal Gauss distribution.

  1. Pregnancy after orthotopic continent urinary diversion.

    PubMed

    Kennedy, W A; Hensle, T W; Reiley, E A; Fox, H E; Haus, T

    1993-10-01

    Continent urinary diversion has become a common form of bladder management for the female exstrophy patient in whom primary reconstruction has failed. Reported are the results of successful pregnancies in four young adult females, who had previously undergone a flap vaginoplasty as part of earlier management and more recently a continent right colonic urinary reservoir with a perineal stoma (Indiana pouch). Pregnancy in each of these patients was characterized by several urinary tract infections, cervical prolapse and mild to severe maternal hydronephrosis. All of the patients had some degree of difficulty with clean intermittent catheterization. One patient required an indwelling catheter with prolonged bed rest. Maternal hydronephrosis resolved after delivery in all instances. All four patients delivered their infants by way of cesarean section, either emergently for maternal or fetal distress or electively. Cervical prolapse did not resolve in three patients and will require surgical repair. After delivery, all patients returned to their previous pattern of clean intermittent catheterization without loss of continence. All the infants delivered were healthy with appropriate weights and high Apgar scores (more than 8). Orthotopic (perineal stoma) continent urinary diversion is not a contraindication to pregnancy. However, our experience mandates delivery by cesarean section with close monitoring for maternal or fetal distress during gestation.

  2. Seismotectonic features of the African plate: the possible dislocation of a continent

    NASA Astrophysics Data System (ADS)

    Meghraoui, Mustapha

    2014-05-01

    The African continent is made of seismically active structures with active deformation in between main substratum shields considered as stable continental interiors. Seismically active regions are primarily located along rift zones, thrust and fold mountain belts, transform faults and volcanic fields. The active tectonic structures generated large and destructive earthquakes in the past with significant damage and economic losses in Africa. Although some regions of the continent show a low-level of seismic activity, several large earthquakes (with M > 7) have occurred in the past. The presence of major active faults that generate destructive earthquakes is among the most important geological and geophysical hazards for the continent. National and International scientific projects dealing with the seismic hazards assessment are increasing in seismically active regions in Africa. The UNESCO-SIDA/IGCP (Project 601 http://eost.u-strasbg.fr/~igcp601/) support the preparation and implementation of the "Seismotectonic Map of Africa". Therefore, new seismotectonic data with the regional analysis of earthquake hazards became necessary as a basis for a mitigation of the earthquake damage. A database in historical and instrumental seismicity, active tectonics, stress tensor distribution, earthquake geology and paleoseismology, active deformation, earthquake geodesy (GPS) and gravity, crustal structure studies, magnetic and structural segmentation, volcanic fields, collision tectonics and rifting processes is prepared to constrain the geodynamic evolution of the continent. Taking into account the geological, tectonic and geophysical characteristics, we define six seismotectonic provinces that characterize the crustal deformation. With the previously identified Somalia tectonic block, the seismotectonic and geophysical framework of the continent reveal the existence of the Cameroon volcanic line, the South African tectonic block with transform faulting and Cape folding system

  3. Advent of Continents: A New Hypothesis

    PubMed Central

    Tamura, Yoshihiko; Sato, Takeshi; Fujiwara, Toshiya; Kodaira, Shuichi; Nichols, Alexander

    2016-01-01

    The straightforward but unexpected relationship presented here relates crustal thickness to magma type in the Izu-Ogasawara (Bonin) and Aleutian oceanic arcs. Volcanoes along the southern segment of the Izu-Ogasawara arc and the western Aleutian arc (west of Adak) are underlain by thin crust (10–20 km). In contrast those along the northern segment of the Izu-Ogasawara arc and eastern Aleutian arc are underlain by crust ~35 km thick. Interestingly, andesite magmas dominate eruptive products from the former volcanoes and mostly basaltic lavas erupt from the latter. According to the hypothesis presented here, rising mantle diapirs stall near the base of the oceanic crust at depths controlled by the thickness of the overlying crust. Where the crust is thin, melting occurs at relatively low pressures in the mantle wedge producing andesitic magmas. Where the crust is thick, melting pressures are higher and only basaltic magmas tend to be produced. The implications of this hypothesis are: (1) the rate of continental crust accumulation, which is andesitic in composition, would have been greatest soon after subduction initiated on Earth, when most crust was thin; and (2) most andesite magmas erupted on continental crust could be recycled from “primary” andesite originally produced in oceanic arcs. PMID:27669662

  4. Earth’s first stable continents did not form by subduction

    NASA Astrophysics Data System (ADS)

    Johnson, Tim E.; Brown, Michael; Gardiner, Nicholas J.; Kirkland, Christopher L.; Smithies, R. Hugh

    2017-02-01

    The geodynamic environment in which Earth’s first continents formed and were stabilized remains controversial. Most exposed continental crust that can be dated back to the Archaean eon (4 billion to 2.5 billion years ago) comprises tonalite-trondhjemite-granodiorite rocks (TTGs) that were formed through partial melting of hydrated low-magnesium basaltic rocks; notably, these TTGs have ‘arc-like’ signatures of trace elements and thus resemble the continental crust produced in modern subduction settings. In the East Pilbara Terrane, Western Australia, low-magnesium basalts of the Coucal Formation at the base of the Pilbara Supergroup have trace-element compositions that are consistent with these being source rocks for TTGs. These basalts may be the remnants of a thick (more than 35 kilometres thick), ancient (more than 3.5 billion years old) basaltic crust that is predicted to have existed if Archaean mantle temperatures were much hotter than today’s. Here, using phase equilibria modelling of the Coucal basalts, we confirm their suitability as TTG ‘parents’, and suggest that TTGs were produced by around 20 per cent to 30 per cent melting of the Coucal basalts along high geothermal gradients (of more than 700 degrees Celsius per gigapascal). We also analyse the trace-element composition of the Coucal basalts, and propose that these rocks were themselves derived from an earlier generation of high-magnesium basaltic rocks, suggesting that the arc-like signature in Archaean TTGs was inherited from an ancestral source lineage. This protracted, multistage process for the production and stabilization of the first continents—coupled with the high geothermal gradients—is incompatible with modern-style plate tectonics, and favours instead the formation of TTGs near the base of thick, plateau-like basaltic crust. Thus subduction was not required to produce TTGs in the early Archaean eon.

  5. The Electrical Resistivity Structure of the Eastern Anatolian Collision Zone, Northeastern Anatolia

    NASA Astrophysics Data System (ADS)

    Cengiz, Özlem; Tuǧrul Başokur, Ahmet; Tolak Çiftçi, Elif

    2016-04-01

    The Northeastern Anatolia is located at the intensely deformed Eastern Anatolian Collision Zone (EACZ), and its tectonic framework is characterized by the collision of the Arabian plate with Eurasian. Although extensive attention is given to understand the crustal and upper mantle processes at this convergent boundary, there is still an ongoing debate over the geodynamic processes of the region. In this study, we were specifically interested in the geoelectric properties and thus geodynamics of the crust beneath the EACZ. Magnetotelluric (MT) measurements were made on two profiles across the north of the EACZ in 1998 as part of a national project undertaken by the Turkish Petroleum Corporation (TPAO). MT data in the frequency range of 300-0.001 Hz were collected from 168 stations located along 78 km north to south and 47 km west to east profiles where direct convergence occurs between Arabian and Eurasian plates. Two and three-dimensional inversion algorithms were used to obtain resistivity models of the study area. According to these models, the upper crust consists of low resistivity sedimentary rocks (<30 Ωm) that are underlain by highly resistive (~500-1000 Ωm) crystalline basement rocks of the Eastern Anatolian Accretionary Complex and Pontides. While the upper and lower crustal resistivity at the northern part of the study area shows a layered structure, significant horizontal and vertical variations for the rest of the EACZ exists on resistivity models. The broad low resistivity zones (<50 Ωm) observed at mid and lower crustal levels throughout the EACZ. These fluid-rich regions along with high temperatures could indicate weak zones representing the locations of active deformation induced by continent-continent collision and correlate with volcanic centers in the region. The variation in the resistivity structure supports the southward subduction model with the resistive continental block and the deep conductive zones presumably corresponding to the

  6. A case study on the influences of long-range transport to Taiwan`s acid deposition using Taiwan air quality model

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ken-Hui Chang; Fu-Tien Jeng

    1996-12-31

    The long-range and transboundary transport of precursors of add deposition in East Asia became important due to the industrial development around this area. We started to develop Taiwan Air Quality Model (TAQM) system since 1992, which is based on regional Acid Deposition Model (RADM) system. A typical episode in Mei-Yu season has been selected to study. A case considering all emissions within simulated domain has been run as a reference case, and another perturbed case, not including Taiwan`s emission, has been also run for analyzing quantitatively the influence of long-range transport to Taiwan`s wet deposition during the episode are 31%more » and 24% for total sulfur compounds and total nitrogen compounds respectively; but for dry deposition, only 6% is contributed by long range transport for sulfur compounds and 29% for total nitrogen compounds. Therefore, the percentages of total acid deposition contributed by long-range transport are 27% and 25% for total sulfur compounds and total nitrogen compounds, respectively.« less

  7. Current deformation in the Tibetan Plateau: a stress gauge in the large-scale India-Asia collision tectonics

    NASA Astrophysics Data System (ADS)

    Capitanio, F. A.

    2017-12-01

    The quantification of the exact tectonic forces budget on Earth has remained thus far elusive. Geodetic velocities provide relevant constraints on the current dynamics of the coupling between collision and continental tectonics, however in the Tibetan plateau these support contrasting, non-unique models. Here, we compare numerical models of coupled India-Asia plate convergence, collision and continent interiors tectonics to the geodetically-constrained motions in the Tibetan Plateau to provide a quantitative assessment of the driving forces of plate tectonics in the area. The models develop a range of long-term evolutions remarkably similar to the Asian tectonics in the Cenozoic, reproducing the current large-scale motions pattern under a range of conditions. Balancing the convergent margin forces, following subduction, and the far-field forcing along the trail of the subducting continent, the geodetic rates in the Tibetan Plateau can be matched. The comparisons support the discussion on the likely processes at work, allowing inferences on the drivers of plateau formation and its role on the plate margin-interiors tectonics. More in general, the outcomes highlight the unique role of the Tibetan Plateau as a pressure gauge for the tectonic forces on Earth.

  8. Development and Validation of the Role Profile of the Nurse Continence Specialist: A Project of the International Continence Society.

    PubMed

    Paterson, Janice; Ostaszkiewicz, Joan; Suyasa, I Gede Putu Darma; Skelly, Jennifer; Bellefeuille, Lesley

    Although nurses have specialized in the management of incontinence, bladder, bowel, and pelvic floor dysfunction for more than 30 years, there is a lack of awareness and underutilization of their role. This article describes a 6-year project to define, characterize, and validate a role profile of the Nurse Continence Specialist. Data collection used a 2-phase, mixed-methods design. Phase 1 of the project resulted in a draft Nurse Continence Specialist role profile and Phase 2 led to validation of the draft profile. The result was a broad consensus about what constitutes the specific skill set for Nurse Continence Specialist specialization within nursing.

  9. Origin of the Dongsha Event in the South China Sea

    NASA Astrophysics Data System (ADS)

    Xie, Zhiyuan; Sun, Longtao; Pang, Xiong; Zheng, Jinyun; Sun, Zhen

    2017-12-01

    Post-rift tectonic activities have been widely observed in the northern continental margin of the South China Sea, especially during the late Miocene. Large numbers of faults became active. Unconformities, uplift of faulted blocks, sequence tilting, erosion along the Dongsha massif and canyon incision were also discriminated at this stage in the Pearl River Mouth basin (PRMB) and the area to the east. This tectonism has been named Dongsha Event. A number of hypotheses have been put forward to explain the mechanism of the Dongsha Event, such as high-velocity lower crustal flow, magmatic underplating, and arc-continent collision. To investigate the tectonic dynamics, sequence contact relationships, fault activities, and magmatism were analyzed along large numbers of seismic profiles that cover the eastern PRMB and Southwest Taiwan Basin. The timing, affected regions, and differences in the intensity of tectonic deformation were assessed, upon which the plate bending model was favored. In order to check the reasonableness of plate bending model, effective elastic thickness and other geodynamic parameters were calculated constrained by uplift area width and regarding the trench as sediment filling. A maximum Te value of 27 km and a minimum value of 4 km were obtained. Integrating with the former stress field calculation, we conclude that the Dongsha Event was mainly affected by subduction and collision of the South China Sea toward the Philippine Sea plate. This event commenced at about 10 Ma and peaked at around 3.6 Ma. Although the high effective elastic thickness required is a problem to be addressed, this research provides by far the most comprehensive evidences to the mechanism of the Dongsha Event.

  10. Sunda-Banda Arc Transition: Marine Wide-Angle Seismic Modeling

    NASA Astrophysics Data System (ADS)

    Shulgin, A.; Planert, L.; Kopp, H.; Mueller, C.; Lueschen, E.; Engels, M.; Flueh, E.; Djajadihardja, Y.; Sindbad Working Group, T

    2008-12-01

    The Sunda-Banda Arc transition is the region of active convergence and collision of the Indo-Australian and Eurasian Plates. The style of subduction changes from an oceanic-island arc subduction to a continental- island arc collision. The character of the incoming plate varies from the rough topography of the Roo Rise, to the smooth seafloor of the Abyssal Plain off Bali, Sumbawa. Forearc structures include well-developed forearc basins and an accretionary prism/outer forearc high of variable size and shape. To quantify the variability of structure of the lower plate and the effects on the upper plate a refraction seismic survey was carried during cruise SO190-2. A total of 245 ocean bottom seismometers were deployed along 1020 nm of wide-angle seismic profiles in four major north-south oriented corridors. To assess the velocity structure we used a tomographic method which jointly inverts for refracted and reflected phases. The sedimentary layers of the models, obtained by the analysis of high-resolution MCS data (see Lueschen et al), were incorporated into the starting model. The obtained models exhibit strong changes of the incoming oceanic crust for the different portions of the margin: The westernmost profile off eastern Java shows a crustal thickness of more than 15 km, most likely related to the presence of an oceanic plateau. Profiles off Lombok reveal an oceanic crust of 8-9 km average thickness in the Argo Abyssal Plain. Crustal and upper mantle velocities are slightly decreased within an area of about 50-60 km seaward of the trench, indicating fracturing and related serpentinization due to bending of the oceanic crust and associated normal faulting. The outer forearc high is characterized by velocities of 2.5-5.5 km/s. For the Lombok Basin, the profiles show a sedimentary infill of up to 3.5 km thick and typical sediment velocities of 1.75-3.0 km/s. A reflector at 16 km depth and velocity values of 7.4-7.8 km/s beneath it suggest the presence of a shallow

  11. Clustering of arc volcanoes caused by temperature perturbations in the back-arc mantle

    PubMed Central

    Lee, Changyeol; Wada, Ikuko

    2017-01-01

    Clustering of arc volcanoes in subduction zones indicates along-arc variation in the physical condition of the underlying mantle where majority of arc magmas are generated. The sub-arc mantle is brought in from the back-arc largely by slab-driven mantle wedge flow. Dynamic processes in the back-arc, such as small-scale mantle convection, are likely to cause lateral variations in the back-arc mantle temperature. Here we use a simple three-dimensional numerical model to quantify the effects of back-arc temperature perturbations on the mantle wedge flow pattern and sub-arc mantle temperature. Our model calculations show that relatively small temperature perturbations in the back-arc result in vigorous inflow of hotter mantle and subdued inflow of colder mantle beneath the arc due to the temperature dependence of the mantle viscosity. This causes a three-dimensional mantle flow pattern that amplifies the along-arc variations in the sub-arc mantle temperature, providing a simple mechanism for volcano clustering. PMID:28660880

  12. Clustering of arc volcanoes caused by temperature perturbations in the back-arc mantle.

    PubMed

    Lee, Changyeol; Wada, Ikuko

    2017-06-29

    Clustering of arc volcanoes in subduction zones indicates along-arc variation in the physical condition of the underlying mantle where majority of arc magmas are generated. The sub-arc mantle is brought in from the back-arc largely by slab-driven mantle wedge flow. Dynamic processes in the back-arc, such as small-scale mantle convection, are likely to cause lateral variations in the back-arc mantle temperature. Here we use a simple three-dimensional numerical model to quantify the effects of back-arc temperature perturbations on the mantle wedge flow pattern and sub-arc mantle temperature. Our model calculations show that relatively small temperature perturbations in the back-arc result in vigorous inflow of hotter mantle and subdued inflow of colder mantle beneath the arc due to the temperature dependence of the mantle viscosity. This causes a three-dimensional mantle flow pattern that amplifies the along-arc variations in the sub-arc mantle temperature, providing a simple mechanism for volcano clustering.

  13. Three-dimensional modeling of the plasma arc in arc welding

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Xu, G.; Tsai, H. L.; Hu, J.

    2008-11-15

    Most previous three-dimensional modeling on gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) focuses on the weld pool dynamics and assumes the two-dimensional axisymmetric Gaussian distributions for plasma arc pressure and heat flux. In this article, a three-dimensional plasma arc model is developed, and the distributions of velocity, pressure, temperature, current density, and magnetic field of the plasma arc are calculated by solving the conservation equations of mass, momentum, and energy, as well as part of the Maxwell's equations. This three-dimensional model can be used to study the nonaxisymmetric plasma arc caused by external perturbations such asmore » an external magnetic field. It also provides more accurate boundary conditions when modeling the weld pool dynamics. The present work lays a foundation for true three-dimensional comprehensive modeling of GTAW and GMAW including the plasma arc, weld pool, and/or electrode.« less

  14. Arc initiation in cathodic arc plasma sources

    DOEpatents

    Anders, Andre

    2002-01-01

    A "triggerless" arc initiation method and apparatus is based on simply switching the arc supply voltage to the electrodes (anode and cathode). Neither a mechanical trigger electrode nor a high voltage flashover from a trigger electrode is required. A conducting path between the anode and cathode is provided, which allows a hot spot to form at a location where the path connects to the cathode. While the conductive path is eroded by the cathode spot action, plasma deposition ensures the ongoing repair of the conducting path. Arc initiation is achieved by simply applying the relatively low voltage of the arc power supply, e.g. 500 V-1 kV, with the insulator between the anode and cathode coated with a conducting layer and the current at the layer-cathode interface concentrated at one or a few contact points. The local power density at these contact points is sufficient for plasma production and thus arc initiation. A conductive surface layer, such as graphite or the material being deposited, is formed on the surface of the insulator which separates the cathode from the anode. The mechanism of plasma production (and arc initiation) is based on explosive destruction of the layer-cathode interface caused by joule heating. The current flow between the thin insulator coating and cathode occurs at only a few contact points so the current density is high.

  15. 21 CFR 876.5280 - Implanted mechanical/hydraulic urinary continence device.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Implanted mechanical/hydraulic urinary continence....5280 Implanted mechanical/hydraulic urinary continence device. (a) Identification. An implanted mechanical/hydraulic urinary continence device is a device used to treat urinary incontinence by the...

  16. 21 CFR 876.5280 - Implanted mechanical/hydraulic urinary continence device.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Implanted mechanical/hydraulic urinary continence....5280 Implanted mechanical/hydraulic urinary continence device. (a) Identification. An implanted mechanical/hydraulic urinary continence device is a device used to treat urinary incontinence by the...

  17. 21 CFR 876.5280 - Implanted mechanical/hydraulic urinary continence device.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Implanted mechanical/hydraulic urinary continence....5280 Implanted mechanical/hydraulic urinary continence device. (a) Identification. An implanted mechanical/hydraulic urinary continence device is a device used to treat urinary incontinence by the...

  18. 21 CFR 876.5280 - Implanted mechanical/hydraulic urinary continence device.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Implanted mechanical/hydraulic urinary continence....5280 Implanted mechanical/hydraulic urinary continence device. (a) Identification. An implanted mechanical/hydraulic urinary continence device is a device used to treat urinary incontinence by the...

  19. 21 CFR 876.5280 - Implanted mechanical/hydraulic urinary continence device.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Implanted mechanical/hydraulic urinary continence....5280 Implanted mechanical/hydraulic urinary continence device. (a) Identification. An implanted mechanical/hydraulic urinary continence device is a device used to treat urinary incontinence by the...

  20. The NCU Lu-Lin Observatory Survived the Taiwan 921 Earthquake

    NASA Astrophysics Data System (ADS)

    Tsay, W. S.; Chang, K. H.; Li, H. H.

    1999-12-01

    The NCU (National Central University) Lu-Lin Observatory is located at Mt. Front Lu-Lin, 120o 52' 25" E and 23o 28' 07" N, a 2862-m peak in the Yu-Shan National Park. The construction of Lu-Lin Observatory was finished in January 1999. Fortunately the Lu-Lin Observatory survived the Taiwan 921 Earthquake that was 7.3 on the Ritcher scale. We are proud of the design of Lu-Lin Observatory adopted H-beam and steel wall even the center of earthquake was only 40 km away. The initial study of Lu-Lin site was started since late 1989. Later on, a three-year project was founded by the National Science Council , which supported the development of a modern seeing monitor for this site survey study from 1990 through 1993. The average seeing of Lu-Lin site is about 1.39 arc-second with average 200 clear nights annually. The sky background of this site is 20.72 mag/arcsec2 in V band and 21.22 mag/arcsec2 in B band. The Lu-Lin observatory is developed for both research and education activity. A homemade 76-cm Super Light Telescope (SLT) and three TAOS's 50-cm robotic telescopes will be the two major research facilities. This work is supported by the National Science Council of Taiwan.

  1. Formation of massive, dense cores by cloud-cloud collisions

    NASA Astrophysics Data System (ADS)

    Takahira, Ken; Shima, Kazuhiro; Habe, Asao; Tasker, Elizabeth J.

    2018-03-01

    We performed sub-parsec (˜ 0.014 pc) scale simulations of cloud-cloud collisions of two idealized turbulent molecular clouds (MCs) with different masses in the range of (0.76-2.67) × 104 M_{⊙} and with collision speeds of 5-30 km s-1. Those parameters are larger than in Takahira, Tasker, and Habe (2014, ApJ, 792, 63), in which study the colliding system showed a partial gaseous arc morphology that supports the NANTEN observations of objects indicated to be colliding MCs using numerical simulations. Gas clumps with density greater than 10-20 g cm-3 were identified as pre-stellar cores and tracked through the simulation to investigate the effects of the mass of colliding clouds and the collision speeds on the resulting core population. Our results demonstrate that the smaller cloud property is more important for the results of cloud-cloud collisions. The mass function of formed cores can be approximated by a power-law relation with an index γ = -1.6 in slower cloud-cloud collisions (v ˜ 5 km s-1), and is in good agreement with observation of MCs. A faster relative speed increases the number of cores formed in the early stage of collisions and shortens the gas accretion phase of cores in the shocked region, leading to the suppression of core growth. The bending point appears in the high-mass part of the core mass function and the bending point mass decreases with increase in collision speed for the same combination of colliding clouds. The higher-mass part of the core mass function than the bending point mass can be approximated by a power law with γ = -2-3 that is similar to the power index of the massive part of the observed stellar initial mass function. We discuss implications of our results for the massive-star formation in our Galaxy.

  2. Formation of massive, dense cores by cloud-cloud collisions

    NASA Astrophysics Data System (ADS)

    Takahira, Ken; Shima, Kazuhiro; Habe, Asao; Tasker, Elizabeth J.

    2018-05-01

    We performed sub-parsec (˜ 0.014 pc) scale simulations of cloud-cloud collisions of two idealized turbulent molecular clouds (MCs) with different masses in the range of (0.76-2.67) × 104 M_{⊙} and with collision speeds of 5-30 km s-1. Those parameters are larger than in Takahira, Tasker, and Habe (2014, ApJ, 792, 63), in which study the colliding system showed a partial gaseous arc morphology that supports the NANTEN observations of objects indicated to be colliding MCs using numerical simulations. Gas clumps with density greater than 10-20 g cm-3 were identified as pre-stellar cores and tracked through the simulation to investigate the effects of the mass of colliding clouds and the collision speeds on the resulting core population. Our results demonstrate that the smaller cloud property is more important for the results of cloud-cloud collisions. The mass function of formed cores can be approximated by a power-law relation with an index γ = -1.6 in slower cloud-cloud collisions (v ˜ 5 km s-1), and is in good agreement with observation of MCs. A faster relative speed increases the number of cores formed in the early stage of collisions and shortens the gas accretion phase of cores in the shocked region, leading to the suppression of core growth. The bending point appears in the high-mass part of the core mass function and the bending point mass decreases with increase in collision speed for the same combination of colliding clouds. The higher-mass part of the core mass function than the bending point mass can be approximated by a power law with γ = -2-3 that is similar to the power index of the massive part of the observed stellar initial mass function. We discuss implications of our results for the massive-star formation in our Galaxy.

  3. Orthotopic bladder substitution in men revisited: identification of continence predictors.

    PubMed

    Koraitim, M M; Atta, M A; Foda, M K

    2006-11-01

    We determined the impact of the functional characteristics of the neobladder and urethral sphincter on continence results, and determined the most significant predictors of continence. A total of 88 male patients 29 to 70 years old underwent orthotopic bladder substitution with tubularized ileocecal segment (40) and detubularized sigmoid (25) or ileum (23). Uroflowmetry, cystometry and urethral pressure profilometry were performed at 13 to 36 months (mean 19) postoperatively. The correlation between urinary continence and 28 urodynamic variables was assessed. Parameters that correlated significantly with continence were entered into a multivariate analysis using a logistic regression model to determine the most significant predictors of continence. Maximum urethral closure pressure was the only parameter that showed a statistically significant correlation with diurnal continence. Nocturnal continence had not only a statistically significant positive correlation with maximum urethral closure pressure, but also statistically significant negative correlations with maximum contraction amplitude, and baseline pressure at mid and maximum capacity. Three of these 4 parameters, including maximum urethral closure pressure, maximum contraction amplitude and baseline pressure at mid capacity, proved to be significant predictors of continence on multivariate analysis. While daytime continence is determined by maximum urethral closure pressure, during the night it is the net result of 2 forces that have about equal influence but in opposite directions, that is maximum urethral closure pressure vs maximum contraction amplitude plus baseline pressure at mid capacity. Two equations were derived from the logistic regression model to predict the probability of continence after orthotopic bladder substitution, including Z1 (diurnal) = 0.605 + 0.0085 maximum urethral closure pressure and Z2 (nocturnal) = 0.841 + 0.01 [maximum urethral closure pressure - (maximum contraction amplitude

  4. OxyContin: Prescription Drug Abuse. CSAT Advisory.

    ERIC Educational Resources Information Center

    Substance Abuse and Mental Health Services Administration (DHHS/PHS), Rockville, MD. Center for Substance Abuse Treatment.

    Recently, the media have issued numerous reports about the apparent increase in OxyContin abuse and addiction. OxyContin has been heralded as a miracle drug that allows patients with chronic pain to resume a normal life. It has also been called pharmaceutical heroin and is thought to have been responsible for a number of deaths and robberies in…

  5. Dissolved gas concentrations of the geothermal fluids in Taiwan

    NASA Astrophysics Data System (ADS)

    Chen, Ai-Ti; Yang, Tsanyao Frank

    2010-05-01

    Taiwan, a geologically active island, is located on the boundary of the Philippine Sea Plate and the Eurasian Plate. High heat flow and geothermal gradient generated by the complex collision and orogeny, warm up the meteoric water and/or the ground water. The heated water becomes geothermal fluids. In previous studies, researchers tried to categorize hot springs based on the appearance, chemical compositions and lithological areas. Because of the chemical inertness, the concentrations and isotopic composition of dissolved noble gases are good indicators of the mantle degassing, geothermal conditions, and so on. In this study, 55 hot springs were collected from different tectonic units. It is the first time to systematically study the hot springs in Taiwan in terms of dissolved gases. Hot spring water is sampled and stored in pre-evacuated glass bottles for analyzing gas compositions. The abundances of noble gases were determined by a quadrupole mass spectrometer based on the isotope dilution technique. Samples with glass vials are introduced to RAD 7 and GC for dissolved Rn and major dissolved gases analyses. Furthermore, helium isotopic ratios and helium-neon ratios are measured on a conventional noble gas mass spectrometer. For hydrochemistry analysis, water samples are analyzed by IC, ICP-MS and titration. We can classify the hot springs samples into three major groups from main anion concentration data; and then, subdivide them into nine minor groups by cation concentration data. Moreover, according to major dissolved gases compositions, three major gas components: CH4, N2 and CO2, are identified. Dissolved noble gases provided more detailed clues about hot springs sources in Taiwan, such as the degree of mixing between meteoric water and deep-source water, which will be further discussed in this study.

  6. Weld arc simulator

    DOEpatents

    Burr, Melvin J.

    1990-01-30

    An arc voltage simulator for an arc welder permits the welder response to a variation in arc voltage to be standardized. The simulator uses a linear potentiometer connected to the electrode to provide a simulated arc voltage at the electrode that changes as a function of electrode position.

  7. Zircon crytallization and recycling in the magma chamber of the rhyolitic Kos Plateau Tuff (Aegean arc)

    USGS Publications Warehouse

    Bachman, O.; Charlier, B.L.A.; Lowenstern, J. B.

    2007-01-01

    In contrast to most large-volume silicic magmas in continental arcs, which are thought to evolve as open systems with significant assimilation of preexisting crust, the Kos Plateau Miff magma formed dominantly by crystal fractionation of mafic parents. Deposits from this ??? 60 km3 pyroclastic eruption (the largest known in the Aegean arc) lack xenocrystic zircons [secondary ion mass spectrometry (SIMS) U-Pb ages on zircon cores never older than 500 ka] and display Sr-Nd whole-rock isotopic ratios within the range of European mantle in an area with exposed Paleozoic and Tertiary continental crust; this evidence implies a nearly closed-system chemical differentiation. Consequently, the age range provided by zircon SIMS U-Th-Pb dating is a reliable indicator of the duration of assembly and longevity of the silicic magma body above its solidus. The age distribution from 160 ka (age of eruption by sanidine 40Ar/39Ar dating; Smith et al., 1996) to ca. 500 ka combined with textural characteristics (high crystal content, corrosion of most anhydrous phenocrysts, but stability of hydrous phases) suggest (1) a protracted residence in the crust as a crystal mush and (2) rejuvenation (reduced crystallization and even partial resorption of minerals) prior to eruption probably induced by new influx of heat (and volatiles). This extended evolution chemically isolated from the surrounding crust is a likely consequence of the regional geodynamics because the thinned Aegean microplate acts as a refractory container for magmas in the dying Aegean subduction zone (continent-continent subduction). ?? 2007 Geological Society of America.

  8. Zircon crystallization and recycling in the magma chamber of the rhyolitic Kos Plateau Tuff (Aegean arc)

    USGS Publications Warehouse

    Bachman, O.; Charlier, B.L.A.; Lowenstern, J. B.

    2007-01-01

    In contrast to most large-volume silicic magmas in continental arcs, which are thought to evolve as open systems with significant assimilation of preexisting crust, the Kos Plateau Tuff magma formed dominantly by crystal fractionation of mafic parents. Deposits from this ~60 km3 pyroclastic eruption (the largest known in the Aegean arc) lack xenocrystic zircons [secondary ion mass spectrometry (SIMS) U-Pb ages on zircon cores never older than 500 ka] and display Sr-Nd whole-rock isotopic ratios within the range of European mantle in an area with exposed Paleozoic and Tertiary continental crust; this evidence implies a nearly closed-system chemical differentiation. Consequently, the age range provided by zircon SIMS U-Th-Pb dating is a reliable indicator of the duration of assembly and longevity of the silicic magma body above its solidus. The age distribution from 160 ka (age of eruption by sanidine 40Ar/39Ar dating; Smith et al., 1996) to ca. 500 ka combined with textural characteristics (high crystal content, corrosion of most anhydrous phenocrysts, but stability of hydrous phases) suggest (1) a protracted residence in the crust as a crystal mush and (2) rejuvenation (reduced crystallization and even partial resorption of minerals) prior to eruption probably induced by new influx of heat (and volatiles). This extended evolution chemically isolated from the surrounding crust is a likely consequence of the regional geodynamics because the thinned Aegean microplate acts as a refractory container for magmas in the dying Aegean subduction zone (continent-continent subduction).

  9. Combined Bladder Neck Reconstruction and Continent Stoma Creation as a Suitable Alternative for Continence in Bladder Exstrophy: a Preliminary Report.

    PubMed

    Kasprenski, Matthew; Benz, Karl; Jayman, John; Lue, Kathy; Maruf, Mahir; Baumgartner, Timothy; Gearhart, John

    2018-05-25

    To explore the use of concomitant BNR and creation of a continent stoma (CS) in patients that are not quite eligible for BNR, but still strongly desire volitional voiding. The authors retrospectively reviewed an institutional database of EEC patients for those who underwent BNR-CS between 2000 and 2015. Indications for a BNR-CS, perioperative outcomes, and continence status were evaluated. Method of voiding and continence status were analyzed for patients with greater than six months of follow-up after the BNR-CS. A total of 24 EEC patients (15 male and 9 female) underwent BNR-CS at a median age of 8.9 years (range 5.4-17.4). This included, 18 patients with classic bladder exstrophy (CBE), 5 with epispadias, and 1 with a cloacal exstrophy variant. There were 5 (20.1%) surgical complications following the BNR-CS, including 3 febrile urinary tract infections, 1 superficial wound infection, and 1 urethrocutaneous fistula. The median follow-up time from the time of BNR-CS was 1.1 years (range 0.1-14.1). Seventeen of 24 patients (71%) had a follow-up greater than 6 months and were evaluated for continence. Twelve patients (71%) were completely dry for intervals greater than 3 hours following BNR-CS. Five (29%) did not achieve continence with BNR-CS. Of those 5 patients, 3 (60%) underwent subsequent bladder neck transection. Combined BNR and CS is a suitable alternative to achieve urinary continence in patients that are not ideal candidates for BNR alone. This approach can offer a select group of patients the opportunity for volitional voiding. Copyright © 2018. Published by Elsevier Inc.

  10. Fundamental structure model of island arcs and subducted plates in and around Japan

    NASA Astrophysics Data System (ADS)

    Iwasaki, T.; Sato, H.; Ishiyama, T.; Shinohara, M.; Hashima, A.

    2015-12-01

    The eastern margin of the Asian continent is a well-known subduction zone, where the Pacific (PAC) and Philippine Sea (PHS) plates are being subducted. In this region, several island arcs (Kuril, Northeast Japan, Southwest Japan, Izu-Bonin and Ryukyu arcs) meet one another to form a very complicated tectonic environment. At 2014, we started to construct fundamental structure models for island arcs and subducted plates in and around Japan. Our research is composed of 6 items of (1) topography, (2) plate geometry, (3) fault models, (4) the Moho and brittle-ductile transition zone, (5) the lithosphere-asthenosphere boundary, and (6) petrological/rheological models. Such information is basic but inevitably important in qualitative understanding not only for short-term crustal activities in the subduction zone (particularly caused by megathrust earthquakes) but also for long-term cumulative deformation of the arcs as a result of strong plate-arc/arc-arc interactions. This paper is the first presentation of our research, mainly presenting the results of items (1) and (2). The area of our modelling is 12o-54o N and 118o-164o E to cover almost the entire part of Japanese Islands together with Kuril, Ryukyu and Izu-Bonin trenches. The topography model was constructed from the 500-m mesh data provided from GSJ, JODC, GINA and Alaska University. Plate geometry models are being constructed through the two steps. In the first step, we modelled very smooth plate boundaries of the Pacific and Philippine Sea plates in our whole model area using 42,000 earthquake data from JMA, USGS and ISC. For 7,800 cross sections taken with several directions to the trench axes, 2D plate boundaries were defined by fitting to the earthquake distribution (the Wadati-Benioff zone), from which we obtained equi-depth points of the plate boundary. These equi-depth points were then approximated by spline interpolation technique to eliminate shorter wave length undulation (<50-100 km). The obtained

  11. Across-arc versus along-arc Sr-Nd-Pb isotope variations in the Ecuadorian volcanic arc

    NASA Astrophysics Data System (ADS)

    Ancellin, Marie-Anne; Samaniego, Pablo; Vlastélic, Ivan; Nauret, François; Gannoun, Adbelmouhcine; Hidalgo, Silvana

    2017-03-01

    Previous studies of the Ecuadorian arc (1°N-2°S) have revealed across-arc geochemical trends that are consistent with a decrease in mantle melting and slab dehydration away from the trench. The aim of this work is to evaluate how these processes vary along the arc in response to small-scale changes in the age of the subducted plate, subduction angle, and continental crustal basement. We use an extensive database of 1437 samples containing 71 new analyses, of major and trace elements as well as Sr-Nd-Pb isotopes from Ecuadorian and South Colombian volcanic centers. Large geochemical variations are found to occur along the Ecuadorian arc, in particular along the front arc, which encompasses 99% and 71% of the total variations in 206Pb/204Pb and 87Sr/86Sr ratios of Quaternary Ecuadorian volcanics, respectively. The front arc volcanoes also show two major latitudinal trends: (1) the southward increase of 207Pb/204Pb and decrease of 143Nd/144Nd reflect more extensive crustal contamination of magma in the southern part (up to 14%); and (2) the increase of 206Pb/204Pb and decrease of Ba/Th away from ˜0.5°S result from the changing nature of metasomatism in the subarc mantle wedge with the aqueous fluid/siliceous slab melt ratio decreasing away from 0.5°S. Subduction of a younger and warmer oceanic crust in the Northern part of the arc might promote slab melting. Conversely, the subduction of a colder oceanic crust south of the Grijalva Fracture Zone and higher crustal assimilation lead to the reduction of slab contribution in southern part of the arc.

  12. Quaternary Deformation of Sumba, Indonesia: Evidence from Carbonate Terraces

    NASA Astrophysics Data System (ADS)

    Dahlquist, M. P.; West, A. J.; Dolan, J. F.

    2014-12-01

    understanding of the ongoing collision of the Banda Arc with the Australian continent. A more complete picture of the region may provide insights into seismic hazards as well as the behavior of arc-continent collision systems and active margins in general.

  13. Effects of Cocos Ridge Collision on the Western Caribbean: Is there a Panama Block?

    NASA Astrophysics Data System (ADS)

    Kobayashi, D.; La Femina, P. C.; Geirsson, H.; Chichaco, E.; Abrego M, A. A.; Fisher, D. M.; Camacho, E. I.

    2011-12-01

    It has been recognized that the subduction and collision of the Cocos Ridge, a 2 km high aseismic ridge standing on >20 km thick oceanic crust of the Cocos plate, drives upper plate deformation in southern Central America. Recent studies of Global Positioning System (GPS) derived horizontal velocities relative to the Caribbean Plate showed a radial pattern centered on the Cocos Ridge axis where Cocos-Caribbean convergence is orthogonal, and margin-parallel velocities to the northwest. Models of the full three-dimensional GPS velocity field and earthquake slip vectors demonstrate low mechanical coupling along the Middle America subduction zone in Nicaragua and El Salvador, and a broad zone of high coupling beneath the Osa Peninsula, where the Cocos Ridge intersects the margin. These results suggest that Cocos Ridge collision may be the main driver for trench-parallel motion of the fore arc to the northwest and for uplift and shortening of the outer fore arc in southern Central America, whereby thickened and hence buoyant Cocos Ridge crust acts as an indenter causing the tectonic escape of the fore arc. These studies, however, were not able to constrain well the pattern of surface deformation east-southeast of the ridge axis due to a lack of GPS stations, and Cocos Ridge collision may be responsible for the kinematics and deformation of the proposed Panama block. Recent reinforcement of the GPS network in southeastern Costa Rica and Panama has increased the spatial and temporal resolution of the network and made it possible to further investigate surface deformation of southern Central America and the Panama block. We present a new regional surface velocity field for Central America from geodetic GPS data collected at 11 recently-installed and 178 existing episodic, semi-continuous, and continuous GPS sites in Nicaragua, Costa Rica, and Panama. We investigate the effects of Cocos Ridge collision on the Panama block through kinematic block modeling. Published

  14. Influence of arc current and pressure on non-chemical equilibrium air arc behavior

    NASA Astrophysics Data System (ADS)

    Yi, WU; Yufei, CUI; Jiawei, DUAN; Hao, SUN; Chunlin, WANG; Chunping, NIU

    2018-01-01

    The influence of arc current and pressure on the non-chemical equilibrium (non-CE) air arc behavior of a nozzle structure was investigated based on the self-consistent non-chemical equilibrium model. The arc behavior during both the arc burning and arc decay phases were discussed at different currents and different pressures. We also devised the concept of a non-equilibrium parameter for a better understanding of non-CE effects. During the arc burning phase, the increasing current leads to a decrease of the non-equilibrium parameter of the particles in the arc core, while the increasing pressure leads to an increase of the non-equilibrium parameter of the particles in the arc core. During the arc decay phase, the non-CE effect will decrease by increasing the arc burning current and the nozzle pressure. Three factors together—convection, diffusion and chemical reactions—influence non-CE behavior.

  15. Mantle dynamics of continent-wide tilting of Australia

    NASA Astrophysics Data System (ADS)

    Dicaprio, L.; Gurnis, M.; Muller, R. D.

    2009-12-01

    Australia is distinctive in that during the Cenozoic it experienced first order, broad-scale vertical motions unrelated to normal orogenic processes. The progressive continent-wide tilting down to the northeast is attributed to the horizontal motion of the continent over subducted slabs. We use plate tectonic reconstructions and a model of mantle convection to quantitatively link the geological evolution of the continent to mantle convection. The passage of slabs beneath the Southwest Pacific since 50 Ma is modeled numerically, and the results are compared to geologic observations of anomalous topography. Models show that Australia undergoes a 300 m northeast downward tilt as it approaches and overrides subducted slabs between Melanesia and the active margin along the Loyalty and proto-Tonga Kermadec subduction systems. This pattern of dynamic subsidence is consistent with observations of continent wide tilting and may indicate that during the Cenozoic Australia moved northward away from a relatively hot mantle anomaly presently located beneath Antarctica.

  16. Simulation of active tectonic processes for a convecting mantle with moving continents

    USGS Publications Warehouse

    Trubitsyn, V.; Kaban, M.; Mooney, W.; Reigber, C.; Schwintzer, P.

    2006-01-01

    Numerical models are presented that simulate several active tectonic processes. These models include a continent that is thermally and mechanically coupled with viscous mantle flow. The assumption of rigid continents allows use of solid body equations to describe the continents' motion and to calculate their velocities. The starting point is a quasi-steady state model of mantle convection with temperature/ pressure-dependent viscosity. After placing a continent on top of the mantle, the convection pattern changes. The mantle flow subsequently passes through several stages, eventually resembling the mantle structure under present-day continents: (a) Extension tectonics and marginal basins form on boundary of a continent approaching to subduction zone, roll back of subduction takes place in front of moving continent; (b) The continent reaches the subduction zone, the extension regime at the continental edge is replaced by strong compression. The roll back of the subduction zone still continues after closure of the marginal basin and the continent moves towards the upwelling. As a result the ocean becomes non-symmetric and (c) The continent overrides the upwelling and subduction in its classical form stops. The third stage appears only in the upper mantle model with localized upwellings. ?? 2006 The Authors Journal compilation ?? 2006 RAS.

  17. Birth and demise of the Rheic Ocean magmatic arc(s): Combined U-Pb and Hf isotope analyses in detrital zircon from SW Iberia siliciclastic strata

    NASA Astrophysics Data System (ADS)

    Pereira, M. F.; Gutíerrez-Alonso, G.; Murphy, J. B.; Drost, K.; Gama, C.; Silva, J. B.

    2017-05-01

    Paleozoic continental reconstructions indicate that subduction of Rheic oceanic lithosphere led to collision between Laurussia and Gondwana which was a major event in the formation of the Ouachita-Appalachian-Variscan orogenic belt and the amalgamation of Pangea. However, arc systems which record Rheic Ocean subduction are poorly preserved. The preservation of Devonian detrital zircon in Late Devonian-Early Carboniferous siliciclastic rocks of SW Iberia, rather than arc-related igneous rocks indicates that direct evidence of the arc system may have been largely destroyed by erosion. Here we report in-situ detrital zircon U-Pb isotopic analyses of Late Devonian-Early Carboniferous siliciclastic rocks from the Pulo do Lobo Zone, which is a reworked Late Paleozoic suture zone located between Laurussia and Gondwana. Detrital zircon age spectra from the Pulo do Lobo Zone Frasnian formations show striking similarities, revealing a wide range of ages dominated by Neoproterozoic and Paleoproterozoic grains sourced from rocks typical of peri-Gondwanan terranes, such as Avalonia, the Meguma terrane and the Ossa-Morena Zone. Pulo do Lobo rocks also include representative populations of Mesoproterozoic and Early Silurian zircons that are typical of Avalonia and the Meguma terrane which are absent in the Ossa-Morena Zone. The Famennian-Tournaisian formations from the Pulo do Lobo Zone, however, contain more abundant Middle-Late Devonian zircon indicating the contribution from a previously unrecognized source probably related to the Rheic Ocean magmatic arc(s). The Middle-Late Devonian to Early Carboniferous zircon ages from the siliciclastic rocks of SW Iberia (South Portuguese, Pulo do Lobo and Ossa-Morena zones) have a wide range in εHfT values (- 8.2 to + 8.3) indicating the likely crystallization from magmas formed in a convergent setting. The missing Rheic Ocean arc was probably built on a Meguma/Avalonia type basement. We propose for the Pulo do Lobo Zone that the

  18. Urethral pressure response patterns induced by squeeze in continent and incontinent women.

    PubMed

    Teleman, Pia M; Mattiasson, Anders

    2007-09-01

    Our aim was to compare the urethral pressure response pattern to pelvic floor muscle contractions in 20-27 years old, nulliparous continent women (n = 31) to that of continent (n = 28) and formerly untreated incontinent (n = 59) (53-63 years old) women. These women underwent urethral pressure measurements during rest and repeated pelvic muscle contractions. The response to the contractions was graded 0-4. The young continent women showed a mean urethral pressure response of 2.8, the middle-aged continent women 2.2 (NS vs young continent), and the incontinent women 1.5 (p < 0.05 vs middle-aged continent, p < 0.001 vs young continent). Urethral pressures during rest were significantly higher in the younger women than in both groups of middle-aged women. The decreased ability to increase urethral pressure on demand seen in middle-aged incontinent women compared to continent women of the same age as well as young women seems to be a consequence of a neuromuscular disorder rather than of age.

  19. Evaluation of In-Situ Stress Assessment from Deep Borehole in the Middle Coastal Plain and Its implication for Taiwan Tectonics

    NASA Astrophysics Data System (ADS)

    Yeh, E. C.; Li, W. C.; Chiang, T. C.; Lin, W.; Wang, T. T.; Yu, C. W.; Chiao, C. H.; Yang, M. W.

    2014-12-01

    Scientific study in deep boreholes has paid more attention as the demand of natural resources and waste disposal and risk evaluation of seismic hazard dramatically increases, such as petroleum exploitation, geothermal energy, carbon sequestration, nuclear waste disposal and seismogenic faulting. In the deep borehole geoengineering, knowledge of in-situ stress is essential for the design of drilling-casing plan. Understanding the relationship between fracture and in-situ stress is the key information to evaluate the potential of fracture seal/conduit and fracture reactivity. Also, assessment of in-situ stress can provide crucial information to investigate mechanism of earthquake faulting and stress variationfor earthquake cycles. Formations under the Coastal Plain in Taiwan have evaluated as saline-water formations with gently west-dipping and no distinct fractures endured by regional tectonics of arc-continental collision with N35W compression. The situation is characterized as a suitable place for carbon sequestration. In this study, we will integrate results from different in-situ stress determinations such as anelastic strain recovery (ASR), borehore breakout, hydraulic fracturing from a 3000m borehole of carbon sequestration testing site and further evaluate the seal feasibility and tectonic implication. Results of 30 ASR experiments between the depth of 1500m and 3000m showed the consistent normal faulting stress regime. Stress gradient of vertical stress, horizontal maximum stress and horizontal minimum stress with depth is estimated. Borehole breakout is not existed throughout 1500-3000m. The mean orientation of breakout is about 175deg and mean width of breakout is 84 deg. Based on rock mechanical data, maximum injection pressure of carbon sequestration can be evaulated. Furthermore, normal faulting stress regime is consistent with core observations and image logging, the horizontal maximum stress of 85deg inferred from breakout suggested that this place

  20. [Study on ecological suitability of Gardenia jasminoides based on ArcGIS and Maxent model].

    PubMed

    Miao, Qi; Yuan, Yuan-Jian; Luo, Guang-Ming; Wei, Chun-Hua; Rao, Ya-Qi; Gong, Yu-Hong; Zhang, Lan; Shao, Jian; Dong, Yan-Kai

    2016-09-01

    The application of ArcGIS and Maxent modelto analyze the ecological suitability of Gardenia jasminoides.Taking 85 batches of Gardenia as the basis of analysis, the selection of ecological factors for the growth of Gardenia. The results showed that the average precipitation in April, the average precipitation in November and the average precipitation in August were the most important factors affecting the growth of Gardenia. The relative concentration of Gardenia suitable growth region,north to the south of Shaanxi province, south of Henan, central Anhui, south to the north of Hainan province, west to central Sichuan province, east of Zhejiang coastal area, northeast of Taiwan. Copyright© by the Chinese Pharmaceutical Association.

  1. Childlessness patterns in Taiwan.

    PubMed

    Poston Dl

    1988-06-01

    Taiwan is a newly developed and industrialized area, and along with Korea, Brazil, Argentina, and a few other countries, belongs in a special class of recently industrialized areas. Taiwan has been undergoing large-scale modernization since the 1950s when the Nationalist government 1st began to implement land reform programs and today is 1 of the showcase of newly developed areas of the world. Demographic transition theory shows that fertility is negatively associated with modernization. During the past 3 decades, fertility in Taiwan has followed this pattern in a dramatic manner. Studies of childlessness conducted in Western countries have shown also that as the modernizing influences continue, fertility declines, and childlessness increases as it becomes more and more voluntary. Subregions with the highest levels of modernization and the lowest fertility rates should therefore be characterized by the highest levels of childlessness, particularly among younger women, and vice versa. Given the levels of socioeconomic and demographic development in Taiwan and its subregions circa 1980, as well as its variability among the hsiens and major cities, the author would expect to find higher levels of childlessness in the more developed localities, and lower levels in the less developed subregions. This hypothesis is tested with data from the 1980 Census of Population and Housing: General Report, Taiwan--Fukien Area (Republic of China, 1982) and the 1980 Taiwan--Fukien Demographic Fact Book (Republic of China, 1980).

  2. Seismicity of the Earth 1900-2010 New Guinea and vicinity

    USGS Publications Warehouse

    Benz, Harley M.; Herman, Matthew; Tarr, Arthur C.; Hayes, Gavin P.; Furlong, Kevin P.; Villaseñor, Antonio; Dart, Richard L.; Rhea, Susan

    2011-01-01

    There have been 22 M7.5+ earthquakes recorded in the New Guinea region since 1900. The dominant earthquake mechanisms are thrust and strike slip, associated with the arc-continent collision and the relative motions between numerous local microplates. The largest earthquake in the region was a M8.2 shallow thrust fault event in the northern Papua province of Indonesia that killed 166 people in 1996. The Australia-Pacific plate boundary is over 4,000 km long on the northern margin, from the Sunda (Java) trench in the west to the Solomon Islands in the east. The eastern section is over 2,300 km long, extending west from northeast of the Australian continent and the Coral Sea until it intersects the east coast of Papua New Guinea. The boundary is dominated by the general northward subduction of the Australia plate.

  3. Garnet pyroxenite from Nilgiri Block, southern India: Vestiges of a Neoarchean volcanic arc

    NASA Astrophysics Data System (ADS)

    Samuel, Vinod O.; Kwon, Sanghoon; Santosh, M.; Sajeev, K.

    2018-06-01

    Southern peninsular India preserves records of Late Neoarchean-Early Paleoproterozoic continental building and cratonization. A transect from the Paleoarchean Dharwar Craton to the Neoarchean arc magmatic complex in the Nilgiri Block across the intervening Moyar Suture Zone reveals an arc-accretionary complex composed of banded iron formation (BIF), amphibolite, metatuff, garnet-kyanite schist, metagabbro, pyroxenite and charnockite. Here we investigate the petrology, geochronology and petrogenesis of the pyroxenite and garnet-clinopyroxenite. The pyroxenite is mainly composed of orthopyroxene and clinopyroxene with local domains/pockets enriched in a clinopyroxene-garnet assemblage. Thermobarometric calculations and phase equilibria modeling suggest that the orthopyroxene- and clinopyroxene-rich domains formed at 900-1000 °C, 1-1.2 GPa whereas the garnet- and clinopyroxene-rich domains record higher pressure of about 1.8-2 GPa at similar temperature conditions (900-1000 °C). Zircon U-Pb SHRIMP dating show weighted mean 207Pb-206Pb age of 2532 ± 22 Ma, with metamorphic overgrowth at 2520 ± 27 Ma and 2478 ± 27 Ma. We propose a tectonic model involving decoupling and break-off of the oceanic plate along the southern flanks of the Dharwar Craton, which initiated oceanic plate subduction. Slab melting eventually built the Nilgiri volcanic arc on top of the over-riding plate along the flanks of the Dharwar Craton. Our study supports an active plate tectonic regime at the end of the Archean Era, aiding in the growth of paleo-continents and their assembly into stable cratons.

  4. HIV/HCV Coinfection in Taiwan.

    PubMed

    Hsu, Ching-Sheng; Kao, Jia-Horng

    2016-01-01

    Both human immunodeficiency virus (HIV) and hepatitis C virus (HCV) infection are important global public health problems with shared transmission routes. Although HIV/HCV coinfection is not uncommon, the prevalence rates vary significantly across different studies and regions. In Taiwan, injection drug users have become the major contributors to the HIV/AIDS epidemic since 2005. Because the prevalence of HCV infection is high in injection drug users, this HIV epidemic is also associated with a significant increase of HIV/HCV coinfection in Taiwan. To control Taiwan's HIV epidemic, Taiwan Centers for Disease Control (CDC) launched a harm-reduction program in 2006. The HIV epidemic, the percentage attributed to injection drug users, and the prevalence of HIV/HCV coinfection gradually declined thereafter. In this article, we aimed to thoroughly examine the current literatures of HIV/HCV coinfection in Taiwan and hope to provide a better understanding of the needs for the management of this coinfection. We conducted a narrative review and searched for literature from PubMed, Ovid MEDLINE, and the Cochrane Library database untill August 2015. Studies relevant to the epidemiology and associated risk factors of HIV/HCV coinfection in Taiwan were examined and discussed.

  5. FT4 Data Analysis Summary (SSI-ARC)

    NASA Technical Reports Server (NTRS)

    Isaacson, Douglas R.; Gong, Chester; Reardon, Scott Edward; Santiago, Confesor

    2016-01-01

    Standards for Unmanned Aircraft System (UAS) Detect-and-Avoid (DAA) systems are currently being developed under the auspices of the RTCA Special Committee 228 (SC-228). To support the development of these standards, a series of flight tests has been conducted at NASAs Armstrong Flight Research Center (NASA-AFRC). The fourth in this series of flight test activities (Flight Test 4, or simply FT4) was conducted during the Spring and Summer of 2016. FT4 supported the objectives of numerous organizations working toward UAS DAA Minimum Operational Performance Standards (MOPS) and UAS DAA Radar MOPS. The summary provided herein is limited to the objectives, analysis and conclusions of the NASA Ames Research Center (NASA-ARC) SSI team toward the refinement of UAS DAA MOPS. This document provides a high-level overview of FT4 and the SSI-ARC objectives, a summary of the data analysis methodology and recommendations for UAS DAA MOPS refinements based on the data analysis results. A total of 72 encounters were flown to support SSI-ARC objectives. Test results were generally consistent with acceptable UAS DAA system performance and will be considered in broader SC-228 requirements validation efforts. Observed alert lead times indicated acceptable UAS DAA alerting performance. Effective interoperability between the UAS DAA system and the Traffic Alert and Collision Avoidance System (TCAS) was observed with one notable exception: TCAS Resolutions Advisories (RA) were observed in the absence of any DAA alert on two occasions, indicating the need for alert parameter refinement. Findings further indicated the need for continued work in the areas of DAA Well Clear Recovery logic and alert stability for Mode-C-only intruders. Finally, results demonstrated a high level of compliance with a set of evaluation criteria designed to provide anecdotal evidence of acceptable UAS DAA system performance.

  6. Analysis of Variscan dynamics; early bending of the Cantabria-Asturias Arc, northern Spain

    NASA Astrophysics Data System (ADS)

    Kollmeier, J. M.; van der Pluijm, B. A.; Van der Voo, R.

    2000-08-01

    Calcite twinning analysis in the Cantabria-Asturias Arc (CAA) of northern Spain provides a basis for evaluating conditions of Variscan stress and constrains the arc's structural evolution. Twinning typically occurs during earliest layer-parallel shortening, offering the ability to define early conditions of regional stress. Results from the Somiedo-Correcilla region are of two kinds: early maximum compressive stress oriented layer-parallel and at high angles to bedding strike (D1 σ1) and later twin producing compression oriented sub-parallel to strike (D2 σ1). When all D1 compressions are rotated into a uniform east-west reference orientation, a quite linear, north-south trending fold-thrust belt results showing a slight deflection of the southern zone to the south-southeast. North-south-directed D2 σ1 compression was recorded prior to bending of the belt. Calcite twinning data elucidate earliest structural conditions that could not be obtained by other means, whereas the kinematics of arc tightening during D2 is constrained by paleomagnetism. A large and perhaps protracted D2 σ1 is suggested by our results, as manifested by approximately 50% arc tightening prior to acquisition of paleomagnetic remagnetizations throughout the CAA. Early east-west compression (D1 σ1) likely resulted from the Ebro-Aquitaine massif docking to Laurussia whereas the north-directed collision of Africa (D2 σ1) produced clockwise bending in the northern zone, radial folding in the hinge, and rotation of thrusts in the southern zone.

  7. Modeling of breakdown during the post-arc phase of a vacuum circuit breaker

    NASA Astrophysics Data System (ADS)

    Sarrailh, P.; Garrigues, L.; Boeuf, J. P.; Hagelaar, G. J. M.

    2010-12-01

    After a high-current interruption in a vacuum circuit breaker (VCB), the electrode gap is filled with a high density copper vapor plasma in a large copper vapor density (~1022 m-3). The copper vapor density is sustained by electrode evaporation. During the post-arc phase, a rapidly increasing voltage is applied to the gap, and a sheath forms and expands, expelling the plasma from the gap when circuit breaking is successful. There is, however, a risk of breakdown during that phase, leading to the failure of the VCB. Preventing breakdown during the post-arc phase is an important issue for the improvement of VCB reliability. In this paper, we analyze the risk of Townsend breakdown in the high copper vapor density during the post-arc phase using a numerical model that takes into account secondary electron emission, volume ionization, and plasma and neutral transport, for given electrode temperatures. The simulations show that fast neutrals created in the cathode sheath by charge exchange collisions with ions generate a very large secondary electron emission current that can lead to Townsend breakdown. The results also show that the risk of failure of the VCB due to Townsend breakdown strongly depends on the electrode temperatures (which govern the copper vapor density) and becomes important for temperatures greater than 2100 K, which can be reached in vacuum arcs. The simulations also predict that a hotter anode tends to increase the risk of Townsend breakdown.

  8. Dynamic Modeling of Back-arc Extension in the Aegean Sea and Western Anatolia

    NASA Astrophysics Data System (ADS)

    Mazlum, Ziya; Göğüş, Oğuz H.; Sözbilir, Hasan; Karabulut, Hayrullah; Pysklywec, Russell N.

    2015-04-01

    Western Anatolian-Aegean regions are characterized by large-scale lithospheric thinning and extensional deformation. While many geological observations suggest the formation of rift basins, normal faulting, exhumation of metamorphic rocks, and back-arc volcanism, the primary cause and the geodynamic driving mechanisms for the lithospheric thinning and extension are not well understood. Previous studies suggest three primary geodynamic hypotheses to address the extension in the Aegean-west Anatolia: 1) Slab retreat/roll-back model, inferred by the southward younging magmatism and metamorphic exhumations; 2) Gravitational collapse of the overthickened (post orogenic) lithosphere, interpreted by the structural studies that suggests tectonic mode switching from contraction to extension; 3) Lateral extrusion (escape tectonics) associated with the continental collision in East Anatolia. We use 2-D thermo-mechanical numerical subduction experiments to investigate how subduction retreat and related back-arc basin opening are controlled by a) changing length and thickness of the subducting plate, b) the dip angle of the subducting slab and c) various thickness and thermal properties of the back-arc lithosphere. Subsequently, we explore the surface response to the subduction retreat model in conjunction with the gravitational (orogenic) collapse in the presumed back-arc region. Quantitative model predictions (e.g., crustal thickness, extension rate) are tested against a wide range of available geological and geophysical observations from the Aegean and west Anatolia regions and these results are reconciled with regional tectonic observations. Our model results are interpreted in the context of different surface response in the extensional regime (back-arc) for the Aegean and western Anatolia, where these two regions have been presumably segmented by the right lateral transfer fault system (Izmir-Balıkesir transfer zone).

  9. Poster — Thur Eve — 39: Feasibility of Commissioning HybridArc with the Delta 4 two plane diode phantom: comparisons with Gafchromic Film

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bojechko, C.; Ploquin, N.; University of Calgary, Department of Oncology, Tom Baker Cancer Center, Calgary AB

    2014-08-15

    HybridArc is a relatively novel radiation therapy technique which combines optimized dynamic conformai arcs (DCA) and intensity modulated radiation therapy (IMRT). HybridArc has possible dosimetry and efficiency advantages over stand alone DCA and IMRT treatments and can be readily implemented on any linac capable of DCA and IMRT, giving strong motivation to commission the modality. The Delta4 phantom (Scandidos, Uppsala, Sweden) has been used for IMRT and VMAT clinical dosimetric verification making it a candidate for HybridArc commissioning. However the HybridArc modality makes use of several non co-planar arcs which creates setup issues due to the geometry of the Delta4,more » resulting in possible phantom gantry collisions for plans with non-zero couch angles. An analysis was done determining the feasibility of using the Delta4 fixed at 0° couch angle compared with results obtained using Gafchromic ETB2 film (Ashland, Covington Kentucky) in an anthropomorphic phantom at the planned couch angles. A gamma index analysis of the measured and planned dose distributions was done using Delta4 and DoseLab Pro (Mobius Medical Systems, Houston Texas) software. For both arc and IMRT sub-fields there is reasonable correlation between the gamma index found from the Delta4 and Gafchromic film. All results show the feasibility of using the Delta4 for HybridArc commissioning.« less

  10. Coulomb collisions of ring current particles: Indirect source of heat for the ionosphere

    NASA Technical Reports Server (NTRS)

    Cole, K. D.

    1975-01-01

    The additional energy requirements of the topside ionosphere during a magnetic storm are less than one quarter of the ring current energy. This energy is supplied largely by Coulomb collisions of ring current protons of energy less than about 20 keV with background thermal electrons which conduct the heat to the ionosphere. Past criticisms are discussed of this mechanism for the supply of energy to the SAR-arc and neighboring regions of the ionosphere.

  11. The ContiNet of the International Continence Society.

    PubMed

    Lim, P H; Fonda, D

    1997-01-01

    This is an account of the International Continence Society's ContiNet--the web server linking up continence organisations worldwide with provision to upload or download vast data stores of information on continence via e-mail, FTP, mailing lists, and special tools to seek information using "search engines." Special communication devices using internet voice/phone mail and real-time "text" or "voice" chats permit conversation globally over normal phone lines linked to the Net at local telephone rates. Special features of ContiNet include announcements of upcoming conventions, information for professionals and laypeople, and the capability to conduct research via the net and conduct consultations and discussions via newsgroups. In-built devices requiring special IDs and passwords permit privacy and security for users. Simple instructions are provided on how to get your PC up and running and get connected to fellow members of ICS, link up with national continence societies, or simply surf for professional enrichment and leisure. With the advent of advanced multimedia capabilities, the current poor quality videoconferencing on the Net will be replaced by excellent videophones by 1998.

  12. THE REDSHIFT DISTRIBUTION OF GIANT ARCS IN THE SLOAN GIANT ARCS SURVEY

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bayliss, Matthew B.; Gladders, Michael D.; Koester, Benjamin P.

    2011-01-20

    We measure the redshift distribution of a sample of 28 giant arcs discovered as a part of the Sloan Giant Arcs Survey. Gemini/GMOS-North spectroscopy provides precise redshifts for 24 arcs, and 'redshift desert' constrains for the remaining 4 arcs. This is a direct measurement of the redshift distribution of a uniformly selected sample of bright giant arcs, which is an observable that can be used to inform efforts to predict giant arc statistics. Our primary giant arc sample has a median redshift z = 1.821 and nearly two-thirds of the arcs, 64%, are sources at z {approx}> 1.4, indicating thatmore » the population of background sources that are strongly lensed into bright giant arcs resides primarily at high redshift. We also analyze the distribution of redshifts for 19 secondary strongly lensed background sources that are not visually apparent in Sloan Digital Sky Survey imaging, but were identified in deeper follow-up imaging of the lensing cluster fields. Our redshift sample for the secondary sources is not spectroscopically complete, but combining it with our primary giant arc sample suggests that a large fraction of all background galaxies that are strongly lensed by foreground clusters reside at z {approx}> 1.4. Kolmogorov-Smirnov tests indicate that our well-selected, spectroscopically complete primary giant arc redshift sample can be reproduced with a model distribution that is constructed from a combination of results from studies of strong-lensing clusters in numerical simulations and observational constraints on the galaxy luminosity function.« less

  13. Taiwan: growing, growing, gone.

    PubMed

    Hanson, R

    1979-10-01

    Accommodation between Taiwan and the People's Republic of China may not be inconceivable as trade contacts (though officially disallowed) grow. Because of Taiwan's well-established success and the pressing need in China to industrialize, it appears, however, that such an accommodation will occur only after China becomes more like Taiwan. Taiwan owes its success, first, to land reform and then, in the 1960s, to steady industrialization. Besides broad controls over money supply and capital designed to ward off inflationary pressures when needed, and the grand outlines for development, another factor in the island's economic success is that the government has interfered little with private enterprise. The economy has an underpinning of small to medium size businesses. There are more than 10,000 trading companies. This diverse foundation has given the economy as a whole a flexible buffer on which more sophisticated industires can be formed.

  14. A Geological Model for the Evolution of Early Continents (Invited)

    NASA Astrophysics Data System (ADS)

    Rey, P. F.; Coltice, N.; Flament, N. E.; Thébaud, N.

    2013-12-01

    Geochemical probing of ancient sediments (REE in black shales, strontium composition of carbonates, oxygen isotopes in zircons...) suggests that continents were a late Archean addition at Earth's surface. Yet, geochemical probing of ancient basalts reveals that they were extracted from a mantle depleted of its crustal elements early in the Archean. Considerations on surface geology, the early Earth hypsometry and the rheology and density structure of Archean continents can help solve this paradox. Surface geology: The surface geology of Archean cratons is characterized by thick continental flood basalts (CFBs, including greenstones) emplaced on felsic crusts dominated by Trondhjemite-Tonalite-Granodiorite (TTG) granitoids. This simple geology is peculiar because i/ most CFBs were emplaced below sea level, ii/ after their emplacement, CFBs were deformed into relatively narrow, curviplanar belts (greenstone basins) wrapping around migmatitic TTG domes, and iii/ Archean greenstone belts are richly endowed with gold and other metals deposits. Flat Earth hypothesis: From considerations on early Earth continental geotherm and density structure, Rey and Coltice (2008) propose that, because of the increased ability of the lithosphere to flow laterally, orogenic processes in the Archean produced only subdued topography (continents, Flament et al. (2008) proposed a theory for the hypsometry of the early Earth showing that, until the late Archean, most continents were flooded and Earth was largely a water world. From this, a model consistent with many of the peculiar attributes of Archean geology, can be proposed: 1/ Continents appeared at Earth's surface at an early stage during the Hadean/Archean. However, because they were i/ covered by continental flood basalts, ii/ below sea level, and iii/ deprived of modern-style mountain belts and orogenic plateaux, early felsic

  15. Severe Dengue Fever Outbreak in Taiwan

    PubMed Central

    Wang, Sheng-Fan; Wang, Wen-Hung; Chang, Ko; Chen, Yen-Hsu; Tseng, Sung-Pin; Yen, Chia-Hung; Wu, Deng-Chyang; Chen, Yi-Ming Arthur

    2016-01-01

    Dengue fever (DF) is a vector-borne disease caused by dengue viruses (DENVs). Epidemic dengue occurs intermittently in Taiwan. In 2014, Taiwan experienced its largest DF outbreak. There were 15,732 DF cases reported. There were a total of 136 dengue hemorrhagic fever (DHF) cases, of which 20 resulted in death. Most DF cases were reported in southern Taiwan. A total of 15,043 (96%) cases were from Kaohsiung, a modern city in southern Taiwan. This report reviews DF epidemics in Taiwan during 2005–2014. The correlation between DF and DHF along with temperature and precipitation were conjointly examined. We conclude that most dengue epidemics in Taiwan resulted from imported DF cases. Results indicate three main factors that may have been associated with this DF outbreak in Kaohsiung: an underground pipeline explosion combined with subsequent rainfall and higher temperature. These factors may have enhanced mosquito breeding activity, facilitating DENV transmission. PMID:26572871

  16. Severe Dengue Fever Outbreak in Taiwan.

    PubMed

    Wang, Sheng-Fan; Wang, Wen-Hung; Chang, Ko; Chen, Yen-Hsu; Tseng, Sung-Pin; Yen, Chia-Hung; Wu, Deng-Chyang; Chen, Yi-Ming Arthur

    2016-01-01

    Dengue fever (DF) is a vector-borne disease caused by dengue viruses (DENVs). Epidemic dengue occurs intermittently in Taiwan. In 2014, Taiwan experienced its largest DF outbreak. There were 15,732 DF cases reported. There were a total of 136 dengue hemorrhagic fever (DHF) cases, of which 20 resulted in death. Most DF cases were reported in southern Taiwan. A total of 15,043 (96%) cases were from Kaohsiung, a modern city in southern Taiwan. This report reviews DF epidemics in Taiwan during 2005-2014. The correlation between DF and DHF along with temperature and precipitation were conjointly examined. We conclude that most dengue epidemics in Taiwan resulted from imported DF cases. Results indicate three main factors that may have been associated with this DF outbreak in Kaohsiung: an underground pipeline explosion combined with subsequent rainfall and higher temperature. These factors may have enhanced mosquito breeding activity, facilitating DENV transmission. © The American Society of Tropical Medicine and Hygiene.

  17. Radon and gamma rays anomalies observed in northern Taiwan: a possible connection with the seismicity near the subduction zone

    NASA Astrophysics Data System (ADS)

    Fu, C. C.; Lee, L. C.; Yang, T. F.; Wang, P. G.; Liu, T. K.; Walia, V.; Chen, C. H.; Lin, C. H.; Lai, T. H.; Giuliani, G.; Ouzounov, D.

    2015-12-01

    Taiwan is tectonically situated in a terrain resulting from the oblique collision between the Philippine Sea plate (PHS) and the Eurasian plate (EU). The continuous observations of soil radon for earthquake studies at the Tapingti station (TPT) have been recorded and are compared with the data from gamma rays observations at the Taiwan Volcano Observation station(YMSG), located north to the TPT station. Some anomalous high radon concentrations and gamma-ray counts at certain times can be identified. It is noted that the significant increase of soil radon concentrations were observed and followed by the increase in gamma-ray counts several days before the earthquakes, which occurred in eastern Taiwan. Many of these earthquakes are located within the subducting PHS beneath the EU to the north along the Ryukyu trench in northern Taiwan (e.g., ML=6.3 April 20, 2015). It is suggested that the pre-earthquake activities may be associated with slow geodynamic processes at the subduction interface, leading to the PHS movement to trigger radon enhancements at TPT station. Furthermore, the further movement of PHS may be locked by EU and accumulate elastic stress resulting in the increase of gamma rays due to an increase in the porosity and fractures below the YMSG station. The continuous monitoring on the multiple parameters can improve our understanding of the relationship between the observed radon and gamma-ray variations and the regional crustal stress/strain in the area.

  18. Distribution, origin and implications of seismic stress release in shallow and intermediate-depth subduction systems

    NASA Astrophysics Data System (ADS)

    Chen, Po-Fei

    A characterization of focal mechanisms is developed for shallow and intermediate-depth earthquakes in the context of the local geometry of subduction systems. Its application to the Ryukyu-Taiwan-Luzon system is used to refine the spatial distribution of characteristic groups of earthquakes in the framework of local tectonic processes, such as flipping of the polarity of subduction and the nascent processes of arc-continent collision. The Harvard catalogue of Centroid Moment Tensor solutions is expanded to include intermediate-depth earthquakes from the WWSSN-HGLP era (1962--1975). Seventy-six new solutions are obtained, with the resulting dataset estimated to be complete for M0 ≥ 1026 dyn-cm. While source mechanisms from our new dataset are generally similar to those previously compiled in the Harvard catalogue, seismic moment release rates are found to be significantly smaller for the WWSSN era. The intermediate-depth seismicity of South America is compiled from the Harvard catalogue, using projection along local slab coordinates, to determine along-strike variations in the distribution of earthquakes and in the geometry of their stress release. Slab geometry is investigated in relation to slab stresses and the presence or absence of arc volcanism. Steeper-dipping slabs are found to exhibit consistent down-dip extension, a higher rate of seismic moment release and surface volcanism. Visualization using slab coordinate projections is extended systematically to a global survey of the geometry of stress release in intermediate-depth earthquakes. Various proposed models for all subduction zones are appraised, as contributors to stress regimes, based on global data compilations. Down-dip stresses, where prominent, are found to be consistent with the thermo-mechanical and petrological force models. Slab-normal conjugate stresses generally support the concept of earthquake reactivation of fossil faults. Patterns of lateral stresses support the predictions of the so

  19. 21 CFR 876.5310 - Nonimplanted, peripheral electrical continence device.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... a peripheral location and used to stimulate the nerves associated with pelvic floor function to... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Nonimplanted, peripheral electrical continence....5310 Nonimplanted, peripheral electrical continence device. (a) Identification. A nonimplanted...

  20. Our changing continent

    USGS Publications Warehouse

    ,

    1969-01-01

    Where were the land areas and oceans of the North American Continent one million years ago, compared to our present geography? Was North America always about the same size and shape as it is today? To answer these questions, we must construct maps of the lands and sea that existed during the past ages. This process of reconstructing ancient geography is called paleogeography (from the Greek word "palaios," meaning ancient).

  1. Plan quality comparison between 4-arc and 6-arc noncoplanar volumetric modulated arc stereotactic radiotherapy for the treatment of multiple brain metastases.

    PubMed

    Yoshio, Kotaro; Mitsuhashi, Toshiharu; Wakita, Akihisa; Kitayama, Takahiro; Hisazumi, Kento; Inoue, Daisaku; Shiode, Tsuyoki; Akaki, Shiro; Kanazawa, Susumu

    2018-01-04

    To compare the plans of 4-arc and 6-arc noncoplanar volumetric modulated arc stereotactic radiotherapy (VMA-SRT) for multiple brain metastases and to investigate the cutoff value for the tumor number and volume for 6-arc rather than 4-arc VMA-SRT. We identified 24 consecutive multiple-target cases (3 to 19 targets in each case) with 189 total targets. We constructed plans using both 4- and 6-arc noncoplanar VMA-SRT. The prescribed dose was 36 Gy/6 fr, and it was delivered to 95% of the planning target volume (PTV). The plans were evaluated for the dose conformity using the Radiation Therapy Oncology Group and Paddick conformity indices (RCI and PCI), fall-off (Paddick gradient index [PGI]), and the normal brain dose. The median (range) RCI, PCI, and PGI was 0.94 (0.92 to 0.99), 0.89 (0.77 to 0.94), and 3.75 (2.24 to 6.54) for the 4-arc plan and 0.94 (0.91 to 0.98), 0.89 (0.76 to 0.94), and 3.65 (2.24 to 6.5) for the 6-arc plan, respectively. The median (range) of the normal brain dose was 910.3 cGy (381.4 to 1268.9) for the 4-arc plan and 898.8 cGy (377 to 1252.9) for the 6-arc plan. The PGI of the 6-arc plan was significantly superior to that of the 4-arc plan (p = 0.0076), and the optimal cutoff values for the tumor number and volume indicative of 6-arc (and not 4-arc) VMA-SRT were cases with ≥ 5 metastases and a PTV of ≥ 12.9 mL, respectively. The PCI values, however, showed no significant difference between the 2 plans. We believe these results will help in considering the use of 6-arc VMA-SRT for multiple brain metastases. Copyright © 2017 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights reserved.

  2. Oblique collision and accretion of the Netherlands Leeward Antilles island arc: A structural analysis of the Caribbean-South American plate boundary zone

    NASA Astrophysics Data System (ADS)

    Beardsley, Amanda Gail

    2007-12-01

    The Netherlands Leeward Antilles volcanic island arc is an ideal natural laboratory to study the evolution of the Caribbean-South American plate boundary. The Leeward Antilles islands (Aruba, Curacao, and Bonaire) are located offshore western Venezuela, within the obliquely convergent diffuse plate boundary zone. Outcrop analysis, microthermometry, and 2D marine seismic reflection data provide evidence of three generations of regional deformation since the Late Cretaceous. Outcrop analysis of structural features, including faults, joints, and veins, characterizes the kinematic history of the islands. Fluid inclusion analysis of quartz and calcite veins coupled with apatite fission-track dating provides the island exhumation history. Finally, marine reflection seismic data processing and interpretation of newly acquired data elucidates offshore structures to integrate with our onshore results. The oldest regional deformation, resulting in both ductile (D1) and brittle (F 1) structures, is attributed to displacement partitioning along the arcuate Caribbean plate boundary. Associated crustal thinning initiated island exhumation, at a rate of 0.18 km/my, from a maximum burial depth of 6 km in the Late Cretaceous (˜89 Ma). Coeval with D1/F1 deformation and exhumation, stretching of the island arc resulted in extensive basin rifting that separated the island blocks. At ˜55 Ma, a change in the relative motion of the Caribbean plate altered plate boundary dynamics. Displacement along the right-lateral Caribbean transform fault and Oca - San Sebastian - El Pilar strike-slip fault system created a wrench tectonic regime within the diffuse plate boundary zone. A second generation of brittle structures (F2) developed while the islands were at a maximum burial depth of 2 km during the Paleocene/Eocene. Since ˜45 Ma, continued motion along the strike-slip fault systems and oblique plate convergence resulted in the youngest generation of structural features (F3). Regional

  3. Arc dynamics of a pulsed DC nitrogen rotating gliding arc discharge

    NASA Astrophysics Data System (ADS)

    Zhu, Fengsen; Zhang, Hao; Li, Xiaodong; Wu, Angjian; Yan, Jianhua; Ni, Mingjiang; Tu, Xin

    2018-03-01

    In this study, a novel pulsed direct current (DC) rotating gliding arc (RGA) plasma reactor co-driven by an external magnetic field and a tangential gas flow has been developed. The dynamic characteristics of the rotating gliding arc have been investigated by means of numerical simulation and experiment. The simulation results show that a highly turbulent vortex flow can be generated at the bottom of the RGA reactor to accelerate the arc rotation after arc ignition, whereas the magnitude of gas velocity declined significantly along the axial direction of the RGA reactor. The calculated arc rotation frequency (14.4 Hz) is reasonably close to the experimental result (18.5 Hz) at a gas flow rate of 10 l min-1. In the presence of an external magnet, the arc rotation frequency is around five times higher than that of the RGA reactor without using a magnet, which suggests that the external magnetic field plays a dominant role in the maintenance of the arc rotation in the upper zone of the RGA reactor. In addition, when the magnet is placed outside the reactor reversely to form a reverse external magnetic field, the arc can be stabilized at a fixed position in the inner wall of the outer electrode at a critical gas flow rate of 16 l min-1.

  4. The ArcB Leucine Zipper Domain Is Required for Proper ArcB Signaling

    PubMed Central

    Nuñez Oreza, Luis Alberto; Alvarez, Adrián F.; Arias-Olguín, Imilla I.; Torres Larios, Alfredo; Georgellis, Dimitris

    2012-01-01

    The Arc two-component system modulates the expression of numerous genes in response to respiratory growth conditions. This system comprises ArcA as the response regulator and ArcB as the sensor kinase. ArcB is a tripartite histidine kinase whose activity is regulated by the oxidation of two cytosol-located redox-active cysteine residues that participate in intermolecular disulfide bond formation. Here, we report that the ArcB protein segment covering residues 70–121, fulfills the molecular characteristics of a leucine zipper containing coiled coil structure. Also, mutational analyses of this segment reveal three different phenotypical effects to be distributed along the coiled coil structure of ArcB, demonstrating that this motif is essential for proper ArcB signaling. PMID:22666479

  5. Structural Features of the Western Taiwan Foreland Basin in the Eastern Taiwan Strait since Late Miocene

    NASA Astrophysics Data System (ADS)

    WANG, J. H.; Liu, C. S.; Chang, J. H.; Yang, E. Y.

    2017-12-01

    The western Taiwan Foreland Basin lies on the eastern part of Taiwan Strait. The structures in this region are dominated by crustal stretch and a series of flexural normal faults have been developed since Late Miocene owing to the flexural of Eurasia Plate. Through deciphering multi-channel seismic data and drilling data, these flexural features are observed in the offshore Changhua coastal area. The flexure normal faults are important features to realize structural activity in the western Taiwan Foreland Basin. Yang et al. (2016) mention that the reactivated normal faults are found north of the Zhushuixi estuary. It should be a significant issue to decipher whether these faults are still active. In this study, we have analyzed all the available seismic reflections profiles in the central part of the Taiwan Strait, and have observed many pre-Pliocene normal faults that are mainly distributed in the middle of the Taiwan Strait to Changyun Rise, and we tentatively suggest that the formation of these faults may be associated with the formation of the foreland basal unconformity. Furthermore, we will map the distribution of these normal faults and examine whether the reactivated normal faults have extended to south of the Zhushuixi estuary. Finally, we discuss the relation between the reactivated normal faults in the Taiwan Strait and those faults onshore. Key words: Multichannel seismic reflection profile, Taiwan Strait, Foreland basin, normal fault.

  6. Preliminary model for high-power-waveguide arcing and arc protection

    NASA Technical Reports Server (NTRS)

    Yen, H. C.

    1978-01-01

    The arc protection subsystems that are implemented in the DSN high power transmitters are discussed. The status of present knowledge about waveguide arcs is reviewed in terms of a simple engineering model. A fairly general arc detection scheme is also discussed. Areas where further studies are needed are pointed out along with proposed approaches to the solutions of these problems.

  7. Ophthalmic plastic and orbital surgery in Taiwan.

    PubMed

    Hsu, Chi-Hsin; Lin, I-Chan; Shen, Yun-Dun; Hsu, Wen-Ming

    2014-06-01

    We describe in this paper the current status of ophthalmic plastic and orbital surgery in Taiwan. Data were collected from the Bureau of National Health Insurance of Taiwan, the Bulletin of the Taiwan Ophthalmic Plastic and Reconstructive Society, and the Statistics Yearbook of Practicing Physicians and Health Care Organizations in Taiwan by the Taiwan Medical Association. We ascertained that 94 ophthalmologists were oculoplastic surgeons and accounted for 5.8% of 1621 ophthalmologists in Taiwan. They had their fellowship training abroad (most ophthalmologists trained in the United States of America) or in Taiwan. All ophthalmologists were well trained and capable of performing major oculoplastic surgeries. The payment rates by our National Health Insurance for oculoplastic and orbital surgeries are relatively low, compared to Medicare payments in the United States. Ophthalmologists should promote the concept that oculoplastic surgeons specialize in periorbital plastic and aesthetic surgeries. However, general ophthalmologists should receive more educational courses on oculoplastic and cosmetic surgery. Copyright © 2014. Published by Elsevier B.V.

  8. CyberArc: a non-coplanar-arc optimization algorithm for CyberKnife

    NASA Astrophysics Data System (ADS)

    Kearney, Vasant; Cheung, Joey P.; McGuinness, Christopher; Solberg, Timothy D.

    2017-07-01

    The goal of this study is to demonstrate the feasibility of a novel non-coplanar-arc optimization algorithm (CyberArc). This method aims to reduce the delivery time of conventional CyberKnife treatments by allowing for continuous beam delivery. CyberArc uses a 4 step optimization strategy, in which nodes, beams, and collimator sizes are determined, source trajectories are calculated, intermediate radiation models are generated, and final monitor units are calculated, for the continuous radiation source model. The dosimetric results as well as the time reduction factors for CyberArc are presented for 7 prostate and 2 brain cases. The dosimetric quality of the CyberArc plans are evaluated using conformity index, heterogeneity index, local confined normalized-mutual-information, and various clinically relevant dosimetric parameters. The results indicate that the CyberArc algorithm dramatically reduces the treatment time of CyberKnife plans while simultaneously preserving the dosimetric quality of the original plans.

  9. CyberArc: a non-coplanar-arc optimization algorithm for CyberKnife.

    PubMed

    Kearney, Vasant; Cheung, Joey P; McGuinness, Christopher; Solberg, Timothy D

    2017-06-26

    The goal of this study is to demonstrate the feasibility of a novel non-coplanar-arc optimization algorithm (CyberArc). This method aims to reduce the delivery time of conventional CyberKnife treatments by allowing for continuous beam delivery. CyberArc uses a 4 step optimization strategy, in which nodes, beams, and collimator sizes are determined, source trajectories are calculated, intermediate radiation models are generated, and final monitor units are calculated, for the continuous radiation source model. The dosimetric results as well as the time reduction factors for CyberArc are presented for 7 prostate and 2 brain cases. The dosimetric quality of the CyberArc plans are evaluated using conformity index, heterogeneity index, local confined normalized-mutual-information, and various clinically relevant dosimetric parameters. The results indicate that the CyberArc algorithm dramatically reduces the treatment time of CyberKnife plans while simultaneously preserving the dosimetric quality of the original plans.

  10. SU-E-T-106: Development of a Collision Prediction Algorithm for Determining Problematic Geometry for SBRT Treatments Using a Stereotactic Body Frame

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wagar, M; Friesen, S; Mannarino, E

    2014-06-01

    Purpose: Collision between the gantry and the couch or patient during Radiotherapy is not a common concern for conventional RT (static fields or arc). With the increase in the application of stereotactic planning techniques to the body, collisions have become a greater concern. Non-coplanar beam geometry is desirable in stereotatic treatments in order to achieve sharp gradients and a high conformality. Non-coplanar geometry is less intuitive in the body and often requires an iterative process of planning and dry runs to guarantee deliverability. Methods: Purpose written software was developed in order to predict the likelihood of collision between the headmore » of the gantry and the couch, patient or stereotatic body frame. Using the DICOM plan and structures set, exported by the treatment planning system, this software is able to predict the possibility of a collision. Given the plan's isocenter, treatment geometry and exterior contours, the software is able to determine if a particular beam/arc is clinically deliverable or if collision is imminent. Results: The software was tested on real world treatment plans with untreatable beam geometry. Both static non-coplanar and VMAT plans were tested. Of these, the collision prediction software could identify all as having potentially problematic geometry. Re-plans of the same cases were also tested and validated as deliverable. Conclusion: This software is capable of giving good initial indication of deliverability for treatment plans that utilize complex geometry (SBRT) or have lateral isocenters. This software is not intended to replace the standard pre-treatment QA dry run. The effectiveness is limited to those portions of the patient and immobilization devices that have been included in the simulation CT and contoured in the planning system. It will however aid the planner in reducing the iterations required to create complex treatment geometries necessary to achieve ideal conformality and organ sparing.« less

  11. 21 CFR 876.5270 - Implanted electrical urinary continence device.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Implanted electrical urinary continence device... Implanted electrical urinary continence device. (a) Identification. An implanted electrical urinary device is a device intended for treatment of urinary incontinence that consists of a receiver implanted in...

  12. 21 CFR 876.5270 - Implanted electrical urinary continence device.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Implanted electrical urinary continence device... Implanted electrical urinary continence device. (a) Identification. An implanted electrical urinary device is a device intended for treatment of urinary incontinence that consists of a receiver implanted in...

  13. 21 CFR 876.5270 - Implanted electrical urinary continence device.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Implanted electrical urinary continence device... Implanted electrical urinary continence device. (a) Identification. An implanted electrical urinary device is a device intended for treatment of urinary incontinence that consists of a receiver implanted in...

  14. 21 CFR 876.5270 - Implanted electrical urinary continence device.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Implanted electrical urinary continence device... Implanted electrical urinary continence device. (a) Identification. An implanted electrical urinary device is a device intended for treatment of urinary incontinence that consists of a receiver implanted in...

  15. 21 CFR 876.5270 - Implanted electrical urinary continence device.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Implanted electrical urinary continence device. (a) Identification. An implanted electrical urinary device is a device intended for treatment of urinary incontinence that consists of a receiver implanted in... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Implanted electrical urinary continence device...

  16. Numerical investigations of arc behaviour in gas metal arc welding using ANSYS CFX

    NASA Astrophysics Data System (ADS)

    Schnick, M.; Fuessel, U.; Hertel, M.; Spille-Kohoff, A.; Murphy, A. B.

    2011-06-01

    Current numerical models of gas metal arc welding (GMAW) are trying to combine magnetohydrodynamics (MHD) models of the arc and volume of fluid (VoF) models of metal transfer. They neglect vaporization and assume an argon atmosphere for the arc region, as it is common practice for models of gas tungsten arc welding. These models predict temperatures above 20 000 K and a temperature distribution similar to tungsten inert gas (TIG) arcs. However, current spectroscopic temperature measurements in GMAW arcs demonstrate much lower arc temperatures. In contrast to TIG arcs they found a central local minimum of the radial temperature distribution. The paper presents a GMAW arc model that considers metal vapour and which is in a very good agreement with experimentally observed temperatures. Furthermore, the model is able to predict the local central minimum in the radial temperature and the radial electric current density distributions for the first time. The axially symmetric model of the welding torch, the work piece, the wire and the arc (fluid domain) implements MHD as well as turbulent mixing and thermal demixing of metal vapour in argon. The mass fraction of iron vapour obtained from the simulation shows an accumulation in the arc core and another accumulation on the fringes of the arc at 2000 to 5000 K. The demixing effects lead to very low concentrations of iron between these two regions. Sensitive analyses demonstrate the influence of the transport and radiation properties of metal vapour, and the evaporation rate relative to the wire feed. Finally the model predictions are compared with the measuring results of Zielińska et al.

  17. Women scientists in Taiwan: an update.

    PubMed

    Wang, Hsiu-Yun; Stocker, Joel Floyd

    2010-06-01

    This paper reflects upon issues of gender and science in Taiwan. Its starting point is the first academic paper on the subject published in Taiwan in 1996 by Fu and Wang, and then it draws upon the biographical accounts of 20 women scientists. We emphasize the importance of focusing on the specific contexts of the history of science and women in Taiwan. Partly as a result of Taiwan's colonial past and women's limited access to education, women scientists did not emerge in Taiwan until the second half of the 20(th) century when higher education became available to women. The gender issues with which women scientists in Taiwan have had to cope include the ways in which women have been excluded or included, their marital and career status, the local and global politics of scientific knowledge, and negotiating social networks. These issues have remained largely the same since the Fu and Wang study, but they have certainly gained wider attention and understanding, and greater articulation, both within academia and society. 2010 Elsevier. Published by Elsevier B.V. All rights reserved.

  18. Usefulness of overnight pulse oximeter as the sleep assessment tool to assess the 6-year risk of road traffic collision: evidence from the Taiwan Bus Driver Cohort Study.

    PubMed

    Wu, Wei-Te; Tsai, Su-Shan; Liao, Hui-Yi; Lin, Yu-Jen; Lin, Ming-Hsiu; Wu, Trong-Neng; Shih, Tung-Sheng; Liou, Saou-Hsing

    2017-02-01

    In order to support health service organizations in arranging a system for prevention of road traffic collisions (RTC), it is important to study the usefulness of sleep assessment tools. A cohort study was used to evaluate the effectiveness of subjective and objective sleep assessment tools to assess for the 6-year risk of both first RTC event only and recurrent RTC events. The Taiwan Bus Driver Cohort Study (TBDCS) recruited 1650 professional drivers from a large bus company in Taiwan in 2005. The subjects were interviewed in person, completed the sleep assessment questionnaires and had an overnight pulse oximeter survey. Moreover, this cohort of drivers was linked to the National Traffic Accident Database (NTAD) and researchers found 139 new RTC events from 2005 to 2010. Primary outcomes were traffic collisions from NTAD, nocturnal oxygen desaturation index (ODI) from pulse oximeter, Pittsburg sleeping quality score, Epworth daytime sleepiness score, Snore Outcomes Survey score and working patterns from questionnaires. A Cox proportional hazards model and an extended Cox regression model for repeated events were performed to estimate the hazard ratio for RTC. The RTC drivers had increased ODI4 levels (5.77 ± 4.72 vs 4.99 ± 6.68 events/h; P  = 0.008) and ODI3 levels (8.68 ± 6.79 vs 7.42 ± 7.94 events/h; P  = 0.007) in comparison with non-RTC drivers. These results were consistent regardless of whether ODI was evaluated as a continuous or a categorical variable. ODI4 and ODI3 levels increased the 6-year RTC risks among professional drivers even after adjusting for age, education, history of cardiovascular disease, caffeine intake, sleeping pills used, bus driving experience and shift modes. Moreover, there was an increased trend for ODI between the stratification of the number of RTCs in comparison with the non-RTC group. In the extended Cox regression models for repeated RTC events with the Anderson and Gill intensity model and Prentice

  19. Continent women have better urethral neuromuscular function than those with stress incontinence

    PubMed Central

    Mueller, Elizabeth; Brubaker, Linda

    2012-01-01

    Introduction and hypothesis The objective of this study is to describe urethral neuromuscular function using concentric needle electromyography (EMG) in stress incontinent (SUI) and asymptomatic women. Methods Following Institutional Review Board approval, we recruited SUI and asymptomatic women without urinary incontinence. Participants underwent quantitative urethral EMG and urodynamic testing. Results Sixty-seven women (37 SUI, 30 continent) with mean±SD age of 44±12 years participated. Nearly all EMG parameters showed significant differences between continent and SUI women consistent with better motor unit recruitment in continent women. Continent women had larger-amplitude, longer-duration motor unit action potentials (MUP) with increased turns and better MUP recruitment during bladder filling (P<.05). Increasing age was inversely correlated with nearly all MUP parameters (P<.05), suggesting MUP to be consistent with neuropathy. Conclusions We found significant differences in multiple MUP parameters in urethral sphincter between continent and stress incontinent women, suggesting continent women have better urethral innervation. We also found significant neuropathic MUP changes with advancing age, regardless of continence status. PMID:21979386

  20. Preferential rifting of continents - A source of displaced terranes

    NASA Technical Reports Server (NTRS)

    Vink, G. E.; Morgan, W. J.; Zhao, W.-L.

    1984-01-01

    Lithospheric rifting, while prevalent in the continents, rarely occurs in oceanic regions. To explain this preferential rifting of continents, the total strength of different lithospheres is compared by integrating the limits of lithospheric stress with depth. Comparisons of total strength indicate that continental lithosphere is weaker than oceanic lithosphere by about a factor of three. Also, a thickened crust can halve the total strength of normal continental lithosphere. Because the weakest area acts as a stress guide, any rifting close to an ocean-continent boundary would prefer a continental pathway. This results in the formation of small continental fragments or microplates that, once accreted back to a continent during subduction, are seen as displaced terranes. In addition, the large crustal thicknesses associated with suture zones would make such areas likely locations for future rifting episodes. This results in the tendency of new oceans to open along the suture where a former ocean had closed.

  1. Measurements of Atmospheric Mercury at a High Elevation Site (Lulin Atmospheric Background Station, LABS) in Taiwan

    NASA Astrophysics Data System (ADS)

    Sheu, G.; Lee, C.; Lin, N.

    2007-12-01

    Taiwan is located on the edge of the west Pacific Ocean and to the downwind side of East Asia, which is the largest anthropogenic mercury (Hg) emitting region globally. It has been demonstrated that the environmental quality of Taiwan can be influenced by regional Asian atmospheric pollution events, such as acid deposition, dust storm, and biomass burning. Therefore, Taiwan could also be under the influence of the East Asian Hg emissions. As a result, continuous atmospheric Hg measurements have been conducted at Lulin Atmospheric Background Station (LABS, 2862 m a.s.l.) since April 13, 2006 to study the long-range transport and transformation of atmospheric Hg. Three types of atmospheric Hg, including gaseous elemental Hg (GEM), reactive gaseous Hg (RGM), and particulate Hg (PHg), are measured using the Tekran 2537A/1130/1135 speciation system. Here we report the atmospheric Hg data collected between April, 2006 and April, 2007. The average GEM, RGM, and PHg concentrations were 1.83(±0.65) ng m-3, 17.85(±18.70) pg m- 3, and 6.12(±7.36) pg m-3, respectively. Seasonal variability in GEM concentration was evident with higher GEM concentrations between fall and spring. The highest monthly GEM average of 2.43 ng m-3 was observed in October, 2006. GEM concentrations were usually low in summer months with the lowest monthly average of 1.10 ng m-3 in July, 2006. Backward trajectory analysis indicated change in air mass origins among seasons. In summer (May ~ July), air masses were mainly from the Pacific Ocean with minimal land influence. On the other hand, between fall and spring, air masses were more or less under the influence of East Asia continent. These results suggested that Taiwan could be impacted by East Asia Hg emissions between fall and spring. Also, spikes of RGM were frequently detected between midnight and early morning with concurrent decreases in GEM and relative humidity and increases in ozone concentrations, suggesting the oxidation of GEM and

  2. Gondwana to Asia: Plate tectonics, paleogeography and the biological connectivity of the Indian sub-continent from the Middle Jurassic through latest Eocene (166 35 Ma)

    NASA Astrophysics Data System (ADS)

    Ali, Jason R.; Aitchison, Jonathan C.

    2008-06-01

    Using the most up-to-the-date information available, we present a considerably revised plate tectonic and paleogeographic model for the Indian Ocean bordering continents, from Gondwana's Middle Jurassic break-up through to India's collision with Asia in the middle Cenozoic. The landmass framework is then used to explore the sometimes complex and occasionally counter-intuitive patterns that have been observed in the fossil and extant biological records of India, Madagascar, Africa and eastern Eurasia, as well those of the more distal continents. Although the paleogeographic model confirms the traditional view that India became progressively more isolated from the major landmasses during the Cretaceous and Paleocene, it is likely that at various times minor physiographic features (principally ocean islands) provided causeways and/or stepping-stone trails along which land animals could have migrated to/from the sub-continent. Aside from a likely link (albeit broken by several marine gaps) to Africa for much of this time (it is notable, that the present-day/recent biota of Madagascar indicates that the ancestors of five land-mammal orders, plus bats, crossed the > 400-km-wide Mozambique Channel at different times in the Cenozoic), it is possible that the Kerguelen Plateau connected India and Australia-Antarctica in the mid-Cretaceous (approximately 115-90 Ma). Later, the Seychelles-Mascarene Plateau and nearby elevated sea-floor areas could have allowed faunas to pass between southern India and Madagascar in the Late Cretaceous, from around 85-65 Ma, with an early Cenozoic extension to this path forming as a result of the Reunion hot-spot trace islands growing on the ocean floor to the SSW of India. The modelling also suggests that India's northward passage towards Asia, with eventual collision at 35 Ma, involved the NE corner of the sub-continent making a glancing contact with Sumatra, followed by Burma from ~ 57 Ma (late Paleocene) onwards, a scenario which is

  3. Could the Mantle Under Island Arcs Contribute to Long Wavelength Magnetic Anomalies?

    NASA Astrophysics Data System (ADS)

    Friedman, S. A.; Ferre, E. C.; Martin-Hernandez, F.; Feinberg, J. M.; Conder, J. A.

    2016-12-01

    Some island arcs show significant long-wavelength positive magnetic anomalies with potential sources in the mantle wedge while others do not. Here we compare the magnetic properties of mantle xenoliths form metasomatized mantle wedges with counterparts from pristine unaltered mantle and we discuss the role mantle processes may play in producing these anomalies. Samples for this study originate from four localities displaying different degrees of metasomatism, as evidenced by the presence of phlogophite, pargasite, and secondary minerals (olv, cpx, opx): a) Five samples from Ichinomegata crater, Megata volcano, in NE Japan are characteristically lherzolitic with metasomatic pargasite present; b) Six samples from Kurose, SW Japan are mainly harzburgites that contain rare, late stage metasomatic sulfides; c) Ten samples from the Iraya volcano, Batan Island, in the Philippines are lherzolites, harzburgites, and dunites that contain metasomatic olivine, orthopyroxene, clinopyroxene and pargasite; and d) Ten samples from Avacha and Shiveluch volcanoes in Kamchatka, consists of unaltered harzburgites supported by an LOI <1%. Sample localities come from subduction zones of the western Pacific Ocean, where the angle of subduction varies (from 10° in SW Japan to 55° in the Kamchatka and Taiwan-Luzon arcs). When present, ferromagnetic minerals include stoichiometric magnetite with occasional pyrrhotite only in metasomatized samples. Ultimately, metasomatized mantle material has a Koenigsberger ratio less than 1.0 indicating it would not primarily contribute to satellite-altitude magnetic anomalies. While unaltered mantle material may produce a Koenigsberger ratio greater than 1.0, and would thus, contribute to long wavelength magnetic anomalies. The presence of both metasomatized and unaltered mantle material beneath island arcs would be supportive of the positive magnetic anomaly found in some subduction zones.

  4. Insight into collision zone dynamics from topography: numerical modelling results and observations

    NASA Astrophysics Data System (ADS)

    Bottrill, A. D.; van Hunen, J.; Allen, M. B.

    2012-07-01

    Dynamic models of subduction and continental collision are used to predict dynamic topography changes on the overriding plate. The modelling results show a distinct evolution of topography on the overriding plate, during subduction, continental collision and slab break-off. A prominent topographic feature is a temporary (few Myrs) deepening in the area of the back arc-basin after initial collision. This collisional mantle dynamic basin (CMDB) is caused by slab steepening drawing material away from the base of the overriding plate. Also during this initial collision phase, surface uplift is predicted on the overriding plate between the suture zone and the CMDB, due to the subduction of buoyant continental material and its isostatic compensation. After slab detachment, redistribution of stresses and underplating of the overriding plate causes the uplift to spread further into the overriding plate. This topographic evolution fits the stratigraphy found on the overriding plate of the Arabia-Eurasia collision zone in Iran and south east Turkey. The sedimentary record from the overriding plate contains Upper Oligocene-Lower Miocene marine carbonates deposited between terrestrial clastic sedimentary rocks, in units such as the Qom Formation and its lateral equivalents. This stratigraphy shows that during the Late Oligocene-Early Miocene the surface of the overriding plate sank below sea level before rising back above sea level, without major compressional deformation recorded in the same area. This uplift and subsidence pattern correlates well with our modelled topography changes.

  5. The impact of cavernosal nerve preservation on continence after robotic radical prostatectomy

    PubMed Central

    Pick, Donald L.; Osann, Kathryn; Skarecky, Douglas; Narula, Navneet; Finley, David S.; Ahlering, Thomas E.

    2014-01-01

    OBJECTIVE To evaluate associations between baseline characteristics, nerve-sparing (NS) status and return of continence, as a relationship may exist between return to continence and preservation of the neurovascular bundles for potency during radical prostatectomy (RP). PATIENTS AND METHODS The study included 592 consecutive robotic RPs completed between 2002 and 2007. All data were entered prospectively into an electronic database. Continence data (defined as zero pads) was collected using self-administered validated questionnaires. Baseline characteristics (age, International Index of Erectile Function [IIEF-5] score, American Urological Association symptom score, body mass index [BMI], clinical T-stage, Gleason score, and prostate-specific antigen level), NS status and learning curve were retrospectively evaluated for association with overall continence at 1, 3 and 12 months after RP using univariate and multivariable methods. Any patient taking preoperative phosphodiesterase inhibitors was excluded from the postoperative analysis. RESULTS Complete data were available for 537 of 592 patients (91%). Continence rates at 12 months after RP were 89.2%, 88.9% and 84.8% for bilateral NS, unilateral NS and non-NS respectively (P = 0.56). In multivariable analysis age, IIEF-5 score and BMI were significant independent predictors of continence. Cavernosal NS status did not significantly affect continence after adjusting for other co-variables. CONCLUSION After careful multivariable analysis of baseline characteristics age, IIEF-5 score and BMI affected continence in a statistically significant fashion. This suggests that baseline factors and not the physical preservation of the cavernosal nerves predict overall return to continence. PMID:21244602

  6. Cloud Arcs

    Atmospheric Science Data Center

    2013-04-19

    ... series of quasi-circular arcs. Clues regarding the formation of these arcs can be found by noting that larger clouds exist in the ... in Hampton, VA. Image credit: NASA/GSFC/LaRC/JPL, MISR Team. Other formats available at JPL March 11, 2002 - ...

  7. Welding arc plasma physics

    NASA Technical Reports Server (NTRS)

    Cain, Bruce L.

    1990-01-01

    The problems of weld quality control and weld process dependability continue to be relevant issues in modern metal welding technology. These become especially important for NASA missions which may require the assembly or repair of larger orbiting platforms using automatic welding techniques. To extend present welding technologies for such applications, NASA/MSFC's Materials and Processes Lab is developing physical models of the arc welding process with the goal of providing both a basis for improved design of weld control systems, and a better understanding of how arc welding variables influence final weld properties. The physics of the plasma arc discharge is reasonably well established in terms of transport processes occurring in the arc column itself, although recourse to sophisticated numerical treatments is normally required to obtain quantitative results. Unfortunately the rigor of these numerical computations often obscures the physics of the underlying model due to its inherent complexity. In contrast, this work has focused on a relatively simple physical model of the arc discharge to describe the gross features observed in welding arcs. Emphasis was placed of deriving analytic expressions for the voltage along the arc axis as a function of known or measurable arc parameters. The model retains the essential physics for a straight polarity, diffusion dominated free burning arc in argon, with major simplifications of collisionless sheaths and simple energy balances at the electrodes.

  8. Rotating arc spark plug

    DOEpatents

    Whealton, John H.; Tsai, Chin-Chi

    2003-05-27

    A spark plug device includes a structure for modification of an arc, the modification including arc rotation. The spark plug can be used in a combustion engine to reduce emissions and/or improve fuel economy. A method for operating a spark plug and a combustion engine having the spark plug device includes the step of modifying an arc, the modifying including rotating the arc.

  9. Bladder continence management in adult acquired brain injury.

    PubMed

    Caldwell, Sheena B; Wilson, Jennifer S; Smith, Daniel; McCann, John P; Walsh, Ian K

    2014-01-01

    Persistence of urinary incontinence post acquired brain injury (ABI) carries important prognostic significance. We undertook to document the incidence of urinary incontinence, its management and complications in rehabilitation inpatients following ABI and to assess adherence to post ABI bladder management guidelines. A retrospective chart survey of a convenience sample of consecutive admissions to two adult neurorehabilitation units Forster Green Hospital, Belfast, and the Scottish Brain Injury Rehabilitation Service, Edinburgh (SBIRSE). Bladder continence and management on transfer to and discharge from rehabilitation, trial removal of catheter, use of bladder drill, ultrasound investigation, anticholinergic medication and complications were recorded. One hundred and forty six patients were identified. Seventy-seven (52.7%) were independent and continent of urine at rehabilitation admission and 109 (74.7%) on discharge. In all, 13 patients had urinary tract infection, 7 had urethral stricture and 1 developed haematuria whilst catheterised. Ultrasound of renal tracts was underused. Trial removal of catheter after transfer to rehabilitation occurred at a median of 10 days. Urinary continence was achieved in almost half of incontinent ABI patients during rehabilitation. There is potential for increased use of investigation of the renal tracts. Rehabilitation physicians should consider urethral stricture in the management of continence post ABI.

  10. Influence of residual plasma drift velocity on the post-arc sheath expansion of vacuum circuit breakers

    NASA Astrophysics Data System (ADS)

    Mo, Yongpeng; Shi, Zongqian; Bai, Zhibin; Jia, Shenli; Wang, Lijun

    2016-05-01

    The residual plasma in the inter-contact region of a vacuum circuit breaker moves towards the post-arc cathode at current zero, because the residual plasma mainly comes from the cathode spots during the arc burning process. In the most previous theoretical researches on the post-arc sheath expansion process of vacuum circuit breakers, only the thermal motion of residual plasma was taken into consideration. Alternately, the residual plasma was even assumed to be static at the moment of current zero in some simplified models. However, the influence of residual plasma drift velocity at current zero on the post-arc sheath expansion process was rarely investigated. In this paper, this effect is investigated by a one-dimensional particle-in-cell model. Simulation results indicate that the sheath expands slower with higher residual plasma drift velocity in the initial sheath expansion stage. However, with the increase of residual plasma drift velocity, the overall plasma density in the inter-contact region decreases faster, and the sheath expansion velocity increases earlier. Consequently, as a whole, it needs shorter time to expel the residual plasma from the inter-contact region. Furthermore, if the residual plasma drift velocity is high enough, the sheath expansion process ceases before it develops to the post-arc anode. Besides, the influence of the collisions between charges and neutrals is investigated as well in terms of the density of metal vapor. It shows that the residual plasma drift velocity takes remarkable effect only if the density of the metal vapor is relatively low, which corresponds to the circumstance of low-current interruptions.

  11. Meson production in relativistic heavy-ion collisions at AGS energies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Steadman, S.G.; E802 Collaboration

    1993-07-01

    Single particle inclusive spectra are presented for pion and kaon production in Si+Au reactions at an incident momentum of 14.6 A {center_dot} GeV/c and Au+Au reactions at an incident momentum of 11.6 A {center_dot} GeV/c. A simple geometric scaling of the pion production for central collisions as A{sub proj}{sup 1/3} and A{sub targ}{sup 2/3} results from the observed production of about one pion per participant. Kaon yields are shown to be proportional to the number of excited participants and consistent with RQMD and ARC calculations.

  12. Meson production in relativistic heavy-ion collisions at AGS energies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Steadman, S.G.

    1993-01-01

    Single particle inclusive spectra are presented for pion and kaon production in Si + Au reactions at an incident momentum of 14.6 A [center dot] GeV/c and Au + Au reactions at an incident momentum of 11.6 A [center dot] GeV/c. A simple geometric scaling of the pion production for central collisions as A[sub proj][sup 1/3] and A[sub targ][sup 2/3] results from the observed production of about one pion per participant. Kaon yields are shown to be proportional to the number of excited participants and consistent with RQMD and ARC calculations.

  13. History and development of ophthalmology in Taiwan.

    PubMed

    Hou, Yu-Chih; Oren, Gale A; Chen, Muh-Shy; Hu, Fung-Rong

    2016-12-01

    Western medicine was first introduced to Taiwan by medical missionaries in the mid-19 th century. Modernization of medicine was systematically transplanted to Taiwan in the Japanese colonial period, and ophthalmology was established third among hospital departments, following internal medicine and surgery. Dr Hidetaka Yamaguchi, an ophthalmologist, was the first head of the Taihoku Hospital, later known as National Taiwan University Hospital (NTUH; Taipei, Taiwan). Ophthalmologists during the colonial period conducted studies on tropical and infectious eye diseases. After World War II, ophthalmologists at NTUH played an important role in medical education, residency training, studies, and teaching. Dr Yan-Fei Yang established the Taiwan Ophthalmological Society in 1960 and instituted its official journal in 1962. Dr Ho-Ming Lin established the Department of Ophthalmology at the Tri-Service General Hospital in the 1950s and the Veterans General Hospital in the 1960s. Taiwan ophthalmologists eradicated trachoma by 1971. Cataract surgery and penetrating keratoplasty were initially performed in the 1960s. Currently, there are about 1600 ophthalmologists in Taiwan conducting an estimated 120,000 cataract surgeries and 600 corneal transplantations annually. Many subspecialty societies have been established recently that serve to educate Taiwanese ophthalmologists and to connect with international ophthalmic societies. Taiwan ophthalmologists continue to contribute to the advancement of ophthalmic knowledge globally. Copyright © 2016. Published by Elsevier B.V.

  14. Shyok Suture Zone, N Pakistan: late Mesozoic Tertiary evolution of a critical suture separating the oceanic Ladakh Arc from the Asian continental margin

    NASA Astrophysics Data System (ADS)

    Robertson, Alastair H. F.; Collins, Alan S.

    2002-02-01

    The Shyok Suture Zone (Northern Suture) of North Pakistan is an important Cretaceous-Tertiary suture separating the Asian continent (Karakoram) from the Cretaceous Kohistan-Ladakh oceanic arc to the south. In previously published interpretations, the Shyok Suture Zone marks either the site of subduction of a wide Tethyan ocean, or represents an Early Cretaceous intra-continental marginal basin along the southern margin of Asia. To shed light on alternative hypotheses, a sedimentological, structural and igneous geochemical study was made of a well-exposed traverse in North Pakistan, in the Skardu area (Baltistan). To the south of the Shyok Suture Zone in this area is the Ladakh Arc and its Late Cretaceous, mainly volcanogenic, sedimentary cover (Burje-La Formation). The Shyok Suture Zone extends northwards (ca. 30 km) to the late Tertiary Main Karakoram Thrust that transported Asian, mainly high-grade metamorphic rocks southwards over the suture zone. The Shyok Suture Zone is dominated by four contrasting units separated by thrusts, as follows: (1). The lowermost, Askore amphibolite, is mainly amphibolite facies meta-basites and turbiditic meta-sediments interpreted as early marginal basin rift products, or trapped Tethyan oceanic crust, metamorphosed during later arc rifting. (2). The overlying Pakora Formation is a very thick (ca. 7 km in outcrop) succession of greenschist facies volcaniclastic sandstones, redeposited limestones and subordinate basaltic-andesitic extrusives and flow breccias of at least partly Early Cretaceous age. The Pakora Formation lacks terrigenous continental detritus and is interpreted as a proximal base-of-slope apron related to rifting of the oceanic Ladakh Arc; (3). The Tectonic Melange (<300 m thick) includes serpentinised ultramafic rocks, near mid-ocean ridge-type volcanics and recrystallised radiolarian cherts, interpreted as accreted oceanic crust. (4). The Bauma-Harel Group (structurally highest) is a thick succession (several km

  15. Plutonic rocks in the Mineoka-Setogawa ophiolitic mélange, central Japan: Fragments of middle to lower crust of the Izu-Bonin-Mariana Arc?

    NASA Astrophysics Data System (ADS)

    Ichiyama, Yuji; Ito, Hisatoshi; Hokanishi, Natsumi; Tamura, Akihiro; Arai, Shoji

    2017-06-01

    A Paleogene accretionary complex, the Mineoka-Setogawa Belt, is distributed around the Izu Collision Zone, central Japan. Plutonic rocks of gabbro, diorite and tonalite compositions are included as fragments and dykes in an ophiolitic mélange in this belt. Zircon U-Pb dating of the plutonic rocks indicates that they were formed at ca. 35 Ma simultaneously. These ages are consistent with Eocene-Oligocene tholeiite and calc-alkaline arc magmatism in the Izu-Bonin-Mariana (IBM) Arc and exclude several previous models for the origin of the Mineoka-Setogawa ophiolitic rocks. The geochemical characteristics of these plutonic rocks are similar to those of the Eocene-Oligocene IBM tholeiite and calc-alkaline volcanic rocks as well as to the accreted middle crust of the IBM Arc, the Tanzawa Plutonic Complex. Moreover, their lithology is consistent with those of the middle and lower crust of the IBM Arc estimated from the seismic velocity structure. These lines of evidence strongly indicate that the plutonic rocks in the Mineoka-Setogawa ophiolitic mélange are fragments of the middle to lower crust of the IBM Arc. Additionally, the presence of the Mineoka-Setogawa intermediate to felsic plutonic rocks supports the hypothesis that intermediate magma can form continental crust in intra-oceanic arcs.

  16. Surviving a life-threatening crisis: Taiwan's nurse leaders' reflections and difficulties fighting the SARS epidemic.

    PubMed

    Shih, Fu-Jin; Turale, Sue; Lin, Yaw-Sheng; Gau, Meei-Ling; Kao, Ching-Chiu; Yang, Chyn-Yng; Liao, Yen-Chi

    2009-12-01

    This study explored Taiwan's nurse leaders' reflections and experiences of the difficulties they encountered and survival strategies they employed fighting the severe acute respiratory syndrome epidemic and the background context framing these phenomena. On several continents in 2002-2003, the highly infectious severe acute respiratory syndrome overwhelmed health care systems and health professionals who had to provide care in situations involving high personal risk and stress, some becoming infected and dying. Nurse leaders in Taiwan had to develop new strategies and support systems for nursing care. A two-step within-method qualitative triangulation research design. Focus group in-depth interviews held with 70 nurse leaders from four Northern Taiwan hospitals involved in the severe acute respiratory syndrome epidemic. Participants then completed an open ended questionnaire. Content analysis was undertaken with data and stages and themes generated. Data were then analysed using Hobfall's concepts of conservation of resources to further discuss participants' reactions and actions in the severe acute respiratory syndrome crisis. Participants worked under incredible stress to lead the profession through a period of crisis. Five stages arose in the participants' involvement against severe acute respiratory syndrome over 12 weeks: facing shock and chaos; searching for reliable sources to clarify myths; developing and adjusting nursing care; supporting nurses and their clients; and rewarding nurses. Nurse leaders become important executors of intervention in this health disaster, requiring emotional intelligence to manage their internal conflicts and interpersonal relationships effectively. They developed sociopolitical and analytical abilities and crucial requirements for planning and implementing strategies in areas where none previously existed. Building support systems was an important resource for managing conflicts between familial and professional roles

  17. Continent vesicovaginal fistula

    PubMed Central

    de Toledo, Luís Gustavo Morato; Santos, Victor Espinheira; Maron, Paulo Eduardo Gourlat; Vedovato, Bruno César; Fucs, Moacyr; Perez, Marjo Deninson Cardenuto

    2013-01-01

    ABSTRACT Vesicovaginal fistula is an abnormal communication between the bladder and vagina and represents the most frequent type of fistula in the urinary tract. The most common cause in Brazil is iatrogenic fistula, secondary to histerectomia. Classically these women present continuous urinary leakage from the vagina and absence of micturition, with strong negative impact on their quality of life. We present a case of totally continent vesicovaginal fistula, with a follow-up of 11 years with no complications. PMID:23579756

  18. Evaluation of volumetric modulated arc therapy for cranial radiosurgery using multiple noncoplanar arcs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Audet, Chantal; Poffenbarger, Brett A.; Chang, Pauling

    2011-11-15

    Purpose: To evaluate a commercial volumetric modulated arc therapy (VMAT), using multiple noncoplanar arcs, for linac-based cranial radiosurgery, as well as evaluate the combined accuracy of the VMAT dose calculations and delivery. Methods: Twelve patients with cranial lesions of variable size (0.1-29 cc) and two multiple metastases patients were planned (Eclipse RapidArc AAA algorithm, v8.6.15) using VMAT (1-6 noncoplanar arcs), dynamic conformal arc (DCA, {approx}4 arcs), and IMRT (nine static fields). All plans were evaluated according to a conformity index (CI), healthy brain tissue doses and volumes, and the dose to organs at risk. A 2D dose distribution was measuredmore » (Varian Novalis Tx, HD120 MLC, 1000 MU/min, 6 MV beam) for the {approx}4 arc VMAT treatment plans using calibrated film dosimetry. Results: The CI (0-1 best) average for all plans was best for {approx}4 noncoplanar arc VMAT at 0.86 compared with {approx}0.78 for IMRT and a single arc VMAT and 0.68 for DCA. The volumes of healthy brain receiving 50% of the prescribed target coverage dose or more (V{sub 50%}) were lowest for the four arc VMAT [RA(4)] and DCA plans. The average ratio of the V{sub 50%} for the other plans to the RA(4) V{sub 50%} were 1.9 for a single noncoplanar arc VMAT [RA(1nc)], 1.4 for single full coplanar arc VMAT [RA(1f)] and 1.3 for IMRT. The V{sub 50%} improved significantly for single isocenter multiple metastases plan when two noncoplanar VMAT arcs were added to a full single coplanar one. The maximum dose to 5 cc of the outer 1 cm rim of healthy brain which one may want to keep below nonconsequential doses of 300-400 cGy, was 2-3 times greater for IMRT, RA(1nc) and RA(1f) plans compared with the multiple noncoplanar arc DCA and RA(4) techniques. Organs at risk near (0-4 mm) to targets were best spared by (i) single noncoplanar arcs when the targets are lateral to the organ at risk and (ii) by skewed nonvertical planes of IMRT fields when the targets are not lateral

  19. Heat transfer in GTA welding arcs

    NASA Astrophysics Data System (ADS)

    Huft, Nathan J.

    Heat transfer characteristics of Gas Tungsten Arc Welding (GTAW) arcs with arc currents of 50 to 125 A and arc lengths of 3 to 11 mm were measured experimentally through wet calorimetry. The data collected were used to calculate how much heat reported to the cathode and anode and how much was lost from the arc column. A Visual Basic for Applications (VBA) macro was written to further analyze the data and account for Joule heating within the electrodes and radiation and convection losses from the arc, providing a detailed account of how heat was generated and dissipated within the system. These values were then used to calculate arc efficiencies, arc column voltages, and anode and cathode fall voltages. Trends were noted for variances in the arc column voltage, power dissipated from the arc column, and the total power dissipated by the system with changing arc length. Trends for variances in the anode and cathode fall voltages, total power dissipated, Joule heating within the torches and electrodes with changing arc current were also noted. In addition, the power distribution between the anode and cathode for each combination of arc length and arc current was examined. Keywords: Gas Tungsten Arc Welding, GTAW, anode fall, cathode fall, heat transfer, wet calorimetry

  20. Hall-effect arc protector

    DOEpatents

    Rankin, R.A.; Kotter, D.K.

    1997-05-13

    The Hall-Effect Arc Protector is used to protect sensitive electronics from high energy arcs. The apparatus detects arcs by monitoring an electrical conductor, of the instrument, for changes in the electromagnetic field surrounding the conductor which would be indicative of a possible arcing condition. When the magnitude of the monitored electromagnetic field exceeds a predetermined threshold, the potential for an instrument damaging are exists and the control system logic activates a high speed circuit breaker. The activation of the breaker shunts the energy imparted to the input signal through a dummy load to the ground. After the arc condition is terminated, the normal signal path is restored. 2 figs.

  1. Hall-effect arc protector

    DOEpatents

    Rankin, Richard A.; Kotter, Dale K.

    1997-01-01

    The Hall-Effect Arc Protector is used to protect sensitive electronics from high energy arcs. The apparatus detects arcs by monitoring an electrical conductor, of the instrument, for changes in the electromagnetic field surrounding the conductor which would be indicative of a possible arcing condition. When the magnitude of the monitored electromagnetic field exceeds a predetermined threshold, the potential for an instrument damaging are exists and the control system logic activates a high speed circuit breaker. The activation of the breaker shunts the energy imparted to the input signal through a dummy load to the ground. After the arc condition is terminated, the normal signal path is restored.

  2. Maternity Leave in Taiwan

    ERIC Educational Resources Information Center

    Feng, Joyce Yen; Han, Wen-Jui

    2010-01-01

    Using the first nationally representative birth cohort study in Taiwan, this paper examines the role that maternity leave policy in Taiwan plays in the timing of mothers returning to work after giving birth, as well as the extent to which this timing is linked to the amount of time mothers spend with their children and their use of breast milk…

  3. Professional Counseling in Taiwan: Past to Future

    ERIC Educational Resources Information Center

    Guo, Yuh-Jen; Wang, Shu-Ching; Combs, Don C.; Lin, Yi-Chun; Johnson, Veronica

    2013-01-01

    Because of the recent introduction of a licensure law, professional counseling has grown rapidly in Taiwan after decades of slow development. The authors provide a historical review of the development of professional counseling in Taiwan and discuss the current status and future trajectory of professional counseling in Taiwan.

  4. Exploring geothermal structures in the Ilan Plain, Taiwan

    NASA Astrophysics Data System (ADS)

    Wang, Chien-Ying; Shih, Ruey-Chan; Chung, Chen-Tung; Huang, Ming-Zi; Kuo, Hsuan-Yu

    2017-04-01

    The Ilan Plain in northeast Taiwan is located at the southwestern tip of the Okinawa Trough, which extends westward into the Taiwan orogeny. The Ilan Plain covered by thick sediments is clipped by the Hsuehshan Range in the northern side and the Central Range in the southern side. High geothermal gradients with plenteous hot springs of this area may result from igneous intrusion associated with the back-arc spreading of the Okinawa Trough. In this study, we use reflection seismic survey to explore underground structures in the whole Ilan Plain, especially in SanShin, Wujie, and Lize area. We aim to find the relationship between underground structures and geothermal forming mechanism. The research uses reflection seismic survey to investigate the high geothermal gradient area with two mini-vibrators and 240-channel system. The total length of seismic lines is more than 30 kilometers. The results show that alluvial sediments covering the area about 400 600 meters thick and then thin out to the west in SanShin area. In SanShin , the Taiyaqiao anticline in Hsuehshan Range has entered the plain area and is bounded by the Zhuoshui fault (south) and the Zailian fault (north). In Wujie and Lize , Zhuoshui fault cut through a strong reflector which is the top of the gravel layer near the bottom of the alluvial layer, while the SanShin fault seems to cut near very shallow strata. These two faults are a strike-slip fault with a bit of normal fault component distributing over a range of 600 meters. In Ilan Plain, the geothermal forming mechanism is controlled by anticlines and faults. The hydrothermal solution which migrates upward along these anticline or fault zones to the shallow part causing high geothermal gradients in these areas.

  5. Arc-to-Arc mini-sling 1999: a critical analysis of concept and technology.

    PubMed

    Palma, Paulo

    2011-01-01

    The aim of this study was to critically review the Arc-to-Arc mini-sling (Palma's technique) a less invasive mid-urethral sling using bovine pericardium as the sling material. The Arc-to-Arc mini-sling, using bovine pericardium, was the first published report of a mini-sling, in 1999. The technique was identical to the "tension-free tape" operation, midline incision and dissection of the urethra. The ATFP (white line) was identified by blunt dissection, and the mini-sling was sutured to the tendinous arc on both sides with 2 polypropylene 00 sutures. The initial results were encouraging, with 9/10 patients cured at the 6 weeks post-operative visit. However, infection and extrusion of the mini-sling resulted in sling extrusion and removal, with 5 patients remaining cured at 12 months. The Arc-to-Arc mini-sling was a good concept, but failed because of the poor technology available at that time. Further research using new materials and better technology has led to new and safer alternatives for the management of stress urinary incontinence.

  6. Continence technologies whitepaper: Informing new engineering science research.

    PubMed

    Culmer, Pete; Alazmani, Ali; Bryant, Mike; Mancuso, Elena; King, Sarah; Mapunde, Vee; Jeays-Ward, Katherine; Heron, Nicola; Pearson, Russell; Vollebregt, Paul F; Corner, Lynne; Day, Richard

    2018-06-01

    Advances in healthcare technology for continence have historically been limited compared to other areas of medicine, reflecting the complexities of the condition and social stigma which act as a barrier to participation. This whitepaper has been developed to inspire and direct the engineering science community towards research opportunities that exist for continence technologies that address unmet needs in diagnosis, treatment and long-term management. Our aim is to pinpoint key challenges and highlight related research opportunities for novel technological advances. To do so, we draw on experience and expertise from academics, clinicians, patients and patient groups linked to continence healthcare. This is presented in four areas of consideration: the clinical pathway, patient perspective, research challenges and effective innovation. In each we introduce seminal research, background information and demonstrative case-studies, before discussing their relevance to engineering science researchers who are interested in approaching this overlooked but vital area of healthcare.

  7. Medical education in Taiwan.

    PubMed

    Chou, Jen-Yu; Chiu, Chiung-Hsuan; Lai, Enoch; Tsai, Duujian; Tzeng, Chii-Ruey

    2012-01-01

    Taiwan's medical education system bears a close relationship with its colonial and post-colonial history. Since the late nineteenth century, Western medicine, Chinese medicine, and the practice of the other forms of traditional healing have encountered complex transactions with the state and one another, eventually evolving into the present medical system. Nowadays, the mainstream form of medical education in Taiwan is a 7-year Western program; other forms of medical education include a 5-year graduate program and traditional medicine programs. Challenged by the National Health Insurance that emphasizes cost management since 1995 and criticized by the US National Committee on Foreign Medical Education and Accreditation in 1998, medical education reform was implemented by the Taiwan Medical Accreditation Council established in 2000. The reform tries to bring humanities into various aspects of medical education, including student recruitment, curriculum, licensing, and continuing education. Similar to other modernization projects, the reform transplants the American and British standards to Taiwan. These changes hope to insure the reflective capabilities in physicians on the welfare of patients. However, frustration of current and future physicians may be deepened if the reform is insensitive to local issues or incapable of addressing new global tendencies.

  8. Representations of OxyContin in North American newspapers and medical journals

    PubMed Central

    Whelan, Emma; Asbridge, Mark; Haydt, Susan

    2011-01-01

    BACKGROUND: There are public concerns regarding OxyContin (Purdue Pharma, Canada) and charges within the pain medicine community that media coverage of the drug has been biased. OBJECTIVE: To analyze and compare representations of OxyContin in medical journals and North American newspapers in an attempt to shed light on how each contributes to the ‘social problem’ associated with OxyContin. METHODS: Using searches of newspaper and medical literature databases, two samples were drawn: 924 stories published between 1995 and 2005 in 27 North American newspapers, and 197 articles published between 1995 and 2007 in 33 medical journals in the fields of addiction/substance abuse, pain/anesthesiology and general/internal medicine. The foci, themes, perspectives represented and evaluations of OxyContin presented in these texts were analyzed statistically. RESULTS: Newspaper coverage of OxyContin emphasized negative evaluations of the drug, focusing on abuse, addiction, crime and death rather than the use of OxyContin for the legitimate treatment of pain. Newspaper stories most often conveyed the perspectives of law enforcement and courts, and much less often represented the perspectives of physicians. However, analysis of physician perspectives represented in newspaper stories and in medical journals revealed a high degree of inconsistency, especially across the fields of pain medicine and addiction medicine. CONCLUSION: The prevalence of negative representations of OxyContin is often blamed on biased media coverage and an ignorant public. However, the proliferation of inconsistent messages regarding the drug from physicians plays a role in the drug’s persistent status as a social problem. PMID:22059195

  9. Permanent GPS network around the bend of the Jura Arc: preliminary results

    NASA Astrophysics Data System (ADS)

    Sue, Christian; Walpersdorf, Andrea; Sakic, Pierre; Rabin, Mickael; Champagnac, Jean daniel

    2014-05-01

    The Jura Mountain, the westernmost belt of the alpine orogeny, is one of the best-studied orogenic arcs in the world. The Jura arc is a typical fold-and-thrust belt, with a main décollement thrust localized in the Triasic evaporites under the Jurassic-Cretaceous series. It is directly linked to the alpine orogenic wedge, especially in term of critical taper. It is supposed to be still active in collision mode, which would rise up the issue of its relation with the Alps to the East, currently undergoing post-orogenic gravitational potential adjustment. Nevertheless, its current activity and recent deformation remain a matter of debate, few neotectonic-related data being available in this area. The Jura is crosscut by left-lateral strike-slip faults in a radial scheme with respect to the arc, and recent seismicity along one of them, the Vuache fault (Annecy earthquake Ml 5.3 1996), and at the northern front of the belt (Beaume-les-Dames earthquake, Ml 5.1, 2004), argues for ongoing active deformation across the Jura Mountain. Here we present preliminary results of permanent GPS network surrounding the Jura belt (RENAG and RPG data), which tend to show very slow, yet self-consistent strain pattern of the order of some tenth of mm/yr over 100 km-long typical baselines, with shortening perpendicular to the arc, and extension parallel to its axial trend. We also characterize a slow uplift in the same order of magnitude, which appears to be correlated to the current uplift observed in the Alps. Indeed, the uplift velocities are continuously decreasing from the core of the Alps (+2 mm/yr) to the westernmost part of the Jura (+0,4 mm/yr) and to the stable foreland (-0.1 mm/yr). Actually, from the Po plain to the Jura foreland, the GPS-related uplift velocities are well correlated to the topography, and the Jura arc appears connected to the Alps from this point of view. In order to better determine the deformation pattern in the Jura arc, we present a new regional GNSS

  10. Connecting the Bird's Head to the Bird's Body - Cenozoic arc magmatism extends along the length of New Guinea.

    NASA Astrophysics Data System (ADS)

    Webb, Max; White, Lloyd; Jost, Benjamin

    2017-04-01

    New Guinea has a long, complicated history of arc magmatism. The present day shape of the island (resembling that of a bird in flight) formed as a result of oblique convergence of the Pacific and Caroline/Philippine plates with the northward moving Australian plate. This convergence resulted in multiple collisions of island arcs with continental crust, representing a modern day analogue to ancient accretionary orogens. This complex geological history has formed four major tectonic belts; accreted Palaeogene island arcs, the New Guinea Mobile Belt, the New Guinea Fold Belt and a stable platform. These tectonic belts are drawn across most of New Guinea in major review papers. However, these tectonic belts are not generally considered to extend through to New Guinea's western most peninsula (the Bird's Head). We present new field evidence, together with new U-Pb zircon geochronology and geochemical analyses from rocks collected within the Bird's Head. These document Middle to Late Miocene intermediate to felsic volcanic rocks and associated granitoid intrusives that formed along an active continental margin. These are effectively the equivalent of the Maramuni arc and Freida River Complex in eastern New Guinea. Several, broadly Eocene island arcs composed of dominantly mafic volcanic rocks are also found in the Bird's Head. These island arcs accreted along the Bird's Head sometime after their initial formation, possibly coinciding with Middle to Late Miocene active continental margin magmatism and we consider them to be equivalents of the Cyclops Mountains arc in Central New Guinea. This work demonstrates that New Guinea's east-west terranes are more extensive than previously thought. This potentially has implications for locating future ore deposits and understanding the relative position of the Bird's Head with respect to the rest of New Guinea in major plate reconstructions.

  11. Current situation and industrialization of Taiwan nanotechnology

    NASA Astrophysics Data System (ADS)

    Su, Hsin-Ning; Lee, Pei-Chun; Tsai, Min-Hua; Chien, Kuo-Ming

    2007-12-01

    Nanotechnology is projected to be a very promising field, and the impact of nanotechnology on society is increasingly significant as the research funding and manufactured goods increase exponentially. A clearer picture of Taiwan's current and future nanotechnology industry is an essential component for future planning. Therefore, this investigation studies the progress of industrializing nanotechnology in Taiwan by surveying 150 companies. Along with understanding Taiwan's current nanotechnology industrialization, this paper also suggests ways to promote Taiwan's nanotechnology. The survey results are summarized and serve as the basis for planning a nanotechnology industrialization strategy.

  12. Quantifying the seismicity on Taiwan

    NASA Astrophysics Data System (ADS)

    Wu, Yi-Hsuan; Chen, Chien-Chih; Turcotte, Donald L.; Rundle, John B.

    2013-07-01

    We quantify the seismicity on the island of Taiwan using the frequency-magnitude statistics of earthquakes since 1900. A break in Gutenberg-Richter scaling for large earthquakes in global seismicity has been observed, this break is also observed in our Taiwan study. The seismic data from the Central Weather Bureau Seismic Network are in good agreement with the Gutenberg-Richter relation taking b ≈ 1 when M < 7. For large earthquakes, M ≥ 7, the seismic data fit Gutenberg-Richter scaling with b ≈ 1.5. If the Gutenberg-Richter scaling for M < 7 earthquakes is extrapolated to larger earthquakes, we would expect a M > 8 earthquake in the study region about every 25 yr. However, our analysis shows a lower frequency of occurrence of large earthquakes so that the expected frequency of M > 8 earthquakes is about 200 yr. The level of seismicity for smaller earthquakes on Taiwan is about 12 times greater than in Southern California and the possibility of a M ≈ 9 earthquake north or south of Taiwan cannot be ruled out. In light of the Fukushima, Japan nuclear disaster, we also discuss the implications of our study for the three operating nuclear power plants on the coast of Taiwan.

  13. Unroofing history of Late Paleozoic magmatic arcs within the ``Turan Plate'' (Tuarkyr, Turkmenistan)

    NASA Astrophysics Data System (ADS)

    Garzanti, E.; Gaetani, M.

    2002-07-01

    Stratigraphic, sedimentologic and petrographic data collected on the Kizilkaya sedimentary succession (Western Turkmenistan) demonstrate that the "Turan Plate" consists in fact of an amalgamation of Late Paleozoic to Triassic continental microblocks separated by ocean sutures. In the Kizilkaya area, an ophiolitic sequence including pyroxenite, gabbro, pillow basalt and chert, interpreted as the oceanic crust of a back-arc or intra-arc basin, is tectonically juxtaposed against volcaniclastic redbeds documenting penecontemporaneous felsic arc magmatism (Amanbulak Group). A collisional event took place around ?mid-Carboniferous times, when oceanic rocks underwent greenschist-facies metamorphism and a thick volcaniclastic wedge, with pyroclastic rocks interbedded in the lower part, accumulated (Kizilkaya Formation). The climax of orogenic activity is testified by arid fanglomerates shed from the rapid unroofing of a continental arc sequence, including Middle-Upper Devonian back-reef carbonates and cherts, and the underlying metamorphic and granitoid basement rocks (Yashmu Formation). After a short period of relative quiescence, renewed tectonic activity is indicated by a conglomeratic sequence documenting erosion of a sedimentary and metasedimentary succession including chert, sandstone, slate and a few carbonates. A final stage of rhyolitic magmatism took place during rapid unroofing of granitoid basement rocks (Kizildag Formation). Such a complex sequence of events recorded by the Kizilkaya episutural basin succession documents the stepwise assemblage of magmatic arcs and continental fragments to form the Turan microblock collage during the Late Paleozoic. Evolution of detrital modes is compatible with that predicted for juvenile to accreted and unroofed crustal blocks. The deposition of braidplain lithic arkoses in earliest Triassic time indicates that strong subsidence continued after the end of the volcanic activity, possibly in retroarc foreland basin settings

  14. Crustal growth of the Izu-Ogasawara arc estimated from structural characteristics of Oligocene arc

    NASA Astrophysics Data System (ADS)

    Takahashi, N.; Yamashita, M.; Kodaira, S.; Miura, S.; Sato, T.; No, T.; Tatsumi, Y.

    2011-12-01

    Japan Agency for Marine-Earth Science and Technology (JAMSTEC) carried out seismic surveys using a multichannel reflection system and ocean bottom seismographs, and we have clarified crustal structures of whole Izu-Ogasawara (Bonin)-Marina (IBM) arc since 2002. These refection images and velocity structures suggest that the crustal evolution in the intra-oceanic island arc accompanies with much interaction of materials between crust and mantle. Slow mantle velocity identified beneath the thick arc crusts suggests that dense crustal materials transformed into the mantle. On the other hand, high velocity lower crust can be seen around the bottom of the crust beneath the rifted region, and it suggests that underplating of mafic materials occurs there. Average crustal production rate of the entire arc is larger than expected one and approximately 200 km3/km/Ma. The production rate of basaltic magmas corresponds to that of oceanic ridge. Repeated crustal differentiation is indispensable to produce much light materials like continental materials, however, the real process cannot still be resolved yet. We, therefore, submitted drilling proposals to obtain in-situ middle crust with P-wave velocity of 6 km/s. In the growth history of the IBM arc, it is known by many papers that boninitic volcanisms preceded current bimodal volcanisms based on basaltic magmas. The current volcanisms accompanied with basaltic magmas have been occurred since Oligocene age, however, the tectonic differences to develop crustal architecture between Oligocene and present are not understood yet. We obtained new refraction/reflection data along an arc strike of N-S in fore-arc region. Then, we estimate crustal structure with severe change of the crustal thickness from refraction data, which are similar to that along the volcanic front. Interval for location of the thick arc crust along N-S is very similar to that along the volcanic front. The refection image indicates that the basement of the fore-arc

  15. Interactions between laser and arc plasma during laser-arc hybrid welding of magnesium alloy

    NASA Astrophysics Data System (ADS)

    Liu, Liming; Chen, Minghua

    2011-09-01

    This paper presents the results of the investigation on the interactions between laser and arc plasma during laser-arc hybrid welding on magnesium alloy AZ31B using the spectral diagnose technique. By comparably analyzing the variation in plasma information (the shape, the electron temperature and density) of single tungsten inert gas (TIG) welding with the laser-arc hybrid welding, it is found that the laser affects the arc plasma through the keyhole forming on the workpiece. Depending on the welding parameters there are three kinds of interactions taking place between laser and arc plasma.

  16. DC arc weld starter

    DOEpatents

    Campiotti, Richard H.; Hopwood, James E.

    1990-01-01

    A system for starting an arc for welding uses three DC power supplies, a high voltage supply for initiating the arc, an intermediate voltage supply for sustaining the arc, and a low voltage welding supply directly connected across the gap after the high voltage supply is disconnected.

  17. Scrap car recycling in Taiwan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lee, C.H.; Tai, H.S.; Fan, R.K.S.

    1997-12-31

    The official figure of registered automobiles released by the Ministry of Transportation of Taiwan, R.O.C. as of the end of April 1996, is approximately 4.8 millions. Among them, 18% of the cars are between seven and ten years old and 15% of the cars are old than ten years. The result of this large number of old cars is the problem of abandoned cars on the street of Taiwan. This phenomena not only hinders traffic flow but also undermines the living quality in the cities. To minimize these negative effects, EPA has promulgated a Scrap Motor Vehicles Management Regulation tomore » enforce the scrap car recycling in Taiwan. Under this regulation, a buyer of a new vehicle has to pay the Scrap Motor Vehicle Disposal fee (NT$ 3000, or US$ 110 for a car; and NT$ 700, or US$ 25 for a motorcycle). This paper presents the current status of scrap car recycling in Taiwan.« less

  18. Wilson cycle studies

    NASA Technical Reports Server (NTRS)

    1987-01-01

    Continents originate by the sweeping together of island arcs. Continental and island arc crusts are dominated by rocks of comparable compositional and density ranges, evidence of the operation of this process is abundant in the geological record, and can be seen in action today in Indonesia. Lineaments within continents are attributable to a small number of processes of continent formation and modification, but interactions among these processes may produce complex patterns.

  19. Lacustrine lignin biomarker record reveals a severe drought during the late Younger Dryas in southern Taiwan

    NASA Astrophysics Data System (ADS)

    Ding, Xiaodong; Bao, Hongyan; Zheng, Liwei; Li, Dawei; Kao, Shuh-Ji

    2017-03-01

    The Younger Dryas (YD) event, which punctuated the last glacial-Holocene transition period and had a profound impact on global climate, is the most well studied millennial-scale climate event although the triggering mechanism remains debate. Weakened Asian summer monsoon during the YD is recorded in oxygen isotopes of stalagmite from Mainland China. However, lacustrine climate record of the YD event has not been reported from the subtropical land-ocean boundary of the Asian continent near the Pacific warm pool. We provide a lignin biomarker record covering the last deglaciation and early Holocene (17-9 ka BP) from the Dongyuan Lake, southern Taiwan, located at the frontal zone of typhoon invasion. The lignin phenol ratio S/V shows that the vegetation in the catchments had shifted from gymnosperm dominant to angiosperm dominant plants since 12.2 ka BP. Significantly decreased lignin concentrations (TLP and λ8) and elevated lignin degradation parameters ((Ad/Al)v, P/(V + S), DHBA/V) in combination with other organic proxies (TOC, δ13Corg) during the late YD suggest a severe drought had occurred in southern Taiwan during this specific period. Changes in the lignin proxies from the Dongyuan Lake lagged the climate changes registered in stalagmite records by around 500-800 years, suggesting a slow response of vegetation and soil processes to rapid climate changes.

  20. Discrepancy of cytogenetic analysis in Western and eastern Taiwan.

    PubMed

    Chang, Yu-Hsun; Chen, Pui-Yi; Li, Tzu-Ying; Yeh, Chung-Nan; Li, Yi-Shian; Chu, Shao-Yin; Lee, Ming-Liang

    2013-06-01

    This study aimed at investigating the results of second-trimester amniocyte karyotyping in western and eastern Taiwan, and identifying any regional differences in the prevalence of fetal chromosomal anomalies. From 2004 to 2009, pregnant women who underwent amniocentesis in their second trimester at three hospitals in western Taiwan and at four hospitals in eastern Taiwan were included. All the cytogenetic analyses of cultured amniocytes were performed in the cytogenetics laboratory of the Genetic Counseling Center of Hualien Buddhist Tzu Chi General Hospital. We used the chi-square test, Student t test, and Mann-Whitney U test to evaluate the variants of clinical indications, amniocyte karyotyping results, and prevalence and types of chromosomal anomalies in western and eastern Taiwan. During the study period, 3573 samples, 1990 (55.7%) from western Taiwan and 1583 (44.3%) from eastern Taiwan, were collected and analyzed. The main indication for amniocyte karyotyping was advanced maternal age (69.0% in western Taiwan, 67.1% in eastern Taiwan). The detection rates of chromosomal anomalies by amniocyte karyotyping in eastern Taiwan (45/1582, 2.8%) did not differ significantly from that in western Taiwan (42/1989, 2.1%) (p = 1.58). Mothers who had abnormal ultrasound findings and histories of familial hereditary diseases or chromosomal anomalies had higher detection rates of chromosomal anomalies (9.3% and 7.2%, respectively). The detection rate of autosomal anomalies was higher in eastern Taiwan (93.3% vs. 78.6%, p = 0.046), but the detection rate of sex-linked chromosomal anomalies was higher in western Taiwan (21.4% vs. 6.7%, p = 0.046). We demonstrated regional differences in second-trimester amniocyte karyotyping results and established a database of common chromosomal anomalies that could be useful for genetic counseling, especially in eastern Taiwan. Copyright © 2012. Published by Elsevier B.V.

  1. Controlling Arc Length in Plasma Welding

    NASA Technical Reports Server (NTRS)

    Iceland, W. F.

    1986-01-01

    Circuit maintains arc length on irregularly shaped workpieces. Length of plasma arc continuously adjusted by control circuit to maintain commanded value. After pilot arc is established, contactor closed and transfers arc to workpiece. Control circuit then half-wave rectifies ac arc voltage to produce dc control signal proportional to arc length. Circuit added to plasma arc welding machines with few wiring changes. Welds made with circuit cleaner and require less rework than welds made without it. Beads smooth and free of inclusions.

  2. "Dignity": A central construct in nursing home staff understandings of quality continence care.

    PubMed

    Ostaszkiewicz, Joan; Tomlinson, Emily; Hutchinson, Alison M

    2018-02-03

    To explore nursing home staff members' beliefs and expectations about what constitutes "quality continence care" for people living in nursing homes. Most nursing home residents require assistance to maintain continence or manage incontinence. Best practice guidelines promote active investigation of incontinence, treatment of underlying potentially reversible causes, and initial conservative interventions to prevent, minimise and/or treat incontinence. Despite research showing the positive benefits of implementing active interventions, translating the findings of research into practice in nursing homes has been modest. Understanding the perspectives of individuals who provide continence care may help bridge the gap between evidence and practice. A qualitative exploratory descriptive design. Qualitative interviews were conducted with 19 nursing home staff: eight registered nurses, four enrolled nurses and seven personal care workers working in a nursing home in Australia between 2014-2015. Data were analysed inductively to identify themes and subthemes that described and explained staff beliefs about quality continence care in nursing homes. Participants' understanding and expectations about quality continence care were linked to beliefs about incontinence being an intractable and undignified condition in nursing homes. The key theme to emerge was "protecting residents' dignity" which was supported by the following six subthemes: (i) using pads, ii) providing privacy, (iii) knowing how to "manage" incontinence, (iv) providing timely continence care, (v) considering residents' continence care preferences and (vi) communicating sensitively. The findings provide new insight into the basis for continence care practices in nursing homes. Education about continence care should challenge beliefs that limit continence care practice to cleaning, containing and concealing incontinence. There is a need for a multidimensional framework that is informed by social, psychological

  3. Multiple sclerosis and continence issues: an exploratory study.

    PubMed

    Wollin, Judy; Bennie, Mary; Leech, Christine; Windsor, Carol; Spencer, Nancy

    The study described in this article aimed to identify issues relating to incontinence and assess the impact of referral to a continence adviser on the lives of people with multiple sclerosis (MS). The study design used an in-depth, two-phase anonymous mail survey within a general community as nominated by the participants. Fifty-six people participated in phase 1 and eleven people completed phase 2. The results indicated that incontinence is a problem for the vast majority of participants--people with MS. One-third of the eligible participants took up the option of a consultation, assessment and treatment from a continence nurse. Reasons for not taking up the visit from the continence nurse included 'managing OK', 'didn't think it would help', 'embarrassed' and 'too busy'. Increasing awareness of urinary incontinence in the community is important and education needs to focus on at-risk groups in presenting the range of options available to assist people experiencing incontinence.

  4. ARC Events

    Science.gov Websites

    chair IEEE Technical Committee on Automotive Controls (Feb 2018, IEEE) Dr. Anna Stefanopoulou on research of sustainable vehicle technologies (Jan 24, 2018, WEMU) Stefanopoulou plenary at IEEE 56th CDC (Jan 17, 2018, ME) ARC Researchers at IEEE 56th Conf. Decision and Control (Dec 12-14, 2017, CDC) ARC

  5. Study of Magnetic Fabrics across the Central Part of the Chimei Fault, the Coastal Range of Eastern Taiwan

    NASA Astrophysics Data System (ADS)

    Yeh, E. C.; Chu, Y. R.; Chou, Y. M.; Lee, T. Q.; Kuo, S. T.; Cai, Y. M.

    2015-12-01

    Taiwan is an ongoing collisional mountain belt located in the conjunction of two subduction-arc systems with opposite vergences between the Philippine Sea and Eurasian plates. The Coastal Range along the eastern Taiwan is the accreted Luzon arcs and surrounding basins onto the Eurasian crust. The Chimei fault, a typical lithology-contrast fault thrusting the Miocene volcanic Tuluanshan Formation over the Pleistocene sedimentary Paliwan Formation, is the only major reverse fault across the entire Coastal Range. To investigate the deformation pattern and strain history across the Chimei fault, we analyzed oriented samples of mudstone and volcanic rocks across the fault zone, fold zone, damage zone, and wall rocks along the Hsiukuluan River via anisotropy of magnetic susceptibility (AMS). AMS can be represented as a susceptibility ellipsoid with 3 principal directions and values (Kmax, Kint, Kmin) and therefore is well known as a tool of magnetic fabrics to study the deformation. Results of AMS across the central part of the Chimei fault show that the direction of Kmax changed from N-S orientation to sub-vertical and the orientation of Kmin switched from 270/70 to N-S orientation when samples were closed to the fault zone. At the same time, anisotropy was increasing and susceptibility ellipsoid changed from oblate to prolate in the fold zone back to oblate in the fault zone. Based on identification works of magnetic minerals, the major magnetic carrier is magnetite with pseudo-single domain. As a result, it strongly speculated when samples were approaching to the central part of Chimei fault, stress altered from sub-vertical sedimentary loading to horizontally N-S tectonic compression. Due to increasing deformation, oblate ellipsoids with strong anisotropy developed within the fault zone highlighted the strain history of the central part of the Chimei fault.

  6. A unified model of avian species richness on islands and continents.

    PubMed

    Kalmar, Attila; Currie, David J

    2007-05-01

    How many species in a given taxon should be found in a delimited area in a specified place in the world? Some recent literature suggests that the answer to this question depends strongly on the geographical, evolutionary, and ecological context. For example, current theory suggests that species accumulate as a function of area differently on continents and islands. Species richness-climate relationships have been examined separately on continents and on islands. This study tests the hypotheses that (1) the functional relationship between richness and climate is the same on continents and islands; (2) the species-area slope depends on distance-based isolation; (3) species-area relationships differ among land bridge islands, oceanic islands, and continents; (4) richness differs among biogeographic regions independently of climate and isolation. We related bird species numbers in a worldwide sample of 240 continental parcels and 346 islands to several environmental variables. We found that breeding bird richness varies similarly on islands and on continents as a function of mean annual temperature, an area x precipitation interaction, and the distance separating insular samples from the nearest continent (R2 = 0.86). Most studies to date have postulated that the slope of the species-area relationship depends upon isolation. In contrast, we found no such interaction. A richness-environment relationship derived using Old World sites accurately predicts patterns of richness in the New World and vice versa (R2 = 0.85). Our results suggest that most of the global variation in richness is not strongly context-specific; rather, it reflects a small number of general environmental constraints operating on both continents and islands.

  7. Anisotropic tomography of the Indian continent and the geodynamic role of its keel

    NASA Astrophysics Data System (ADS)

    Montagner, J. P.; Maurya, S.; Sibrant, A.; Davaille, A.; Stutzmann, E.; Kumar, R.; Jean, B.

    2017-12-01

    The Indian moved at an exceptional high rate (18-20cm/year) after the birth of La Réunion hotspot, ≈65Ma ago and the Deccan volcanic province before the collision with the Asian continent. Other older plumes Marion, Kerguelen located in the Indian ocean are also associated with very fast plate motion. We present a high-resolution 3D anisotropic model of the Indian plate region down to 300 km depth, obtained by inverting a new massive database of surface-wave observations. The Rayleigh and Love wave dispersion measurements along 14,000 paths are made in a broad frequency range (16-250s). Our estimates of the depth to the Lithosphere-Asthenosphere Boundary (LAB) derived from seismic velocity Vsv variations at depth reveal large variations (120-250 km) beneath the different cratonic blocks. A low velocity layer associated with the Mid-lithospheric discontinuity is present when the root of the lithosphere is deep. This extensive anisotropic tomographic investigation of the Indian continent displays an almost north-south keel, 600km long and 300km wide, down to 250km depth. The keel is characterized by fast velocities, smaller than average radial and azimuthal anisotropies. The distribution of azimuthal anisotropy defines the flow lines around the keel, and, at the LAB, coincides with the APM direction of the Indian plate. The fast axis azimuths at 250 km depth are also in accordance with the results from SK(K)S splitting. Such a keel could probably perturb plume-induced flow in the asthenosphere. To determine the influence of such a keel on the interaction of India with several mantle plumes (Marion, Crozet, Kerguelen, La Réunion), we used laboratory experiments. Some preliminary results will be presented on the comparison between the laboratory flowlines and the direction of seismic anisotropy.

  8. Neogene collision and deformation of convergent margins along the backbone of the Americas

    USGS Publications Warehouse

    von Huene, Roland E.; Ranero, C.R.

    2009-01-01

    Along Pacific convergent margins of the Americas, high-standing relief on the subducting oceanic plate "collides" with continental slopes and subducts. Features common to many collisions are uplift of the continental margin, accelerated seafloor erosion, accelerated basal subduction erosion, a flat slab, and a lack of active volcanism. Each collision along America's margins has exceptions to a single explanation. Subduction of an ???600 km segment of the Yakutat terrane is associated with >5000-m-high coastal mountains. The terrane may currently be adding its unsubducted mass to the continent by a seaward jump of the deformation front and could be a model for docking of terranes in the past. Cocos Ridge subduction is associated with >3000-m-high mountains, but its shallow subduction zone is not followed by a flat slab. The entry point of the Nazca and Juan Fernandez Ridges into the subduction zone has migrated southward along the South American margin and the adjacent coast without unusually high mountains. The Nazca Ridge and Juan Fernandez Ridges are not actively spreading but the Chile Rise collision is a triple junction. These collisions form barriers to trench sediment transport and separate accreting from eroding segments of the frontal prism. They also occur at the separation of a flat slab from a steeply dipping one. At a smaller scale, the subduction of seamounts and lesser ridges causes temporary surface uplift as long as they remain attached to the subducting plate. Off Costa Rica, these features remain attached beneath the continental shelf. They illustrate, at a small scale, the processes of collision. ?? 2009 The Geological Society of America. All rights reserved.

  9. An Overview of the Southern Mariana Subduction Factory: Arc, Cross-Chains, and Back-Arc Basin

    NASA Astrophysics Data System (ADS)

    Stern, R. J.; Hargrove, U. S.; Leybourne, M. I.; Pearce, J. A.; Bloomer, S. H.

    2002-12-01

    The Mariana arc system south of 18°N provides 3 opportunities to study the magmatic outputs of the IBM Subduction Factory: 1) Along the Magmatic arc; 2) Across arc cross-chains; and 3) Along the back-arc basin spreading axis. In spite of being located near population centers of Guam and Saipan, this is a relatively poorly known part of the arc system. There is a clear break in the trend and morphology of the magmatic arc west of the144°E fault and slab tear, and we surveyed and sampled the region north and east of this during the Cook 7 expedition in March-April 2001. Systematic morphologic covariations are observed along the arc and backarc basin magmatic systems, with the shallower ridge depths adjacent to more magmatically-robust arc segments. Our preliminary results reveal a compositional discontinuity in back-arc basin basalts (BABB) south of a bathymetric break near 15°30'N, with BABB in shallower segments to the north having a strong subduction component (higher Ba/Nb, Rb, Zr, etc.) and deeper regions to the south being more MORB-like. This is close to the morphological break along the magmatic front, with larger (>10E11 m3) edifices of the Central Island Province north of 16°N and smaller, entirely submarine volcanoes to the south, implying a more robust magmatic budget in the north; a similar variations are observed for cross-chain volcanoes, with smaller ones associated with the smaller, southern arc volcanoes and larger ones associated with the larger arc volcanoes of the Central Island Province. In contrast to the back-arc basin spreading axis, no systematic compositional variations are observed along or across the arc. Arc and cross-chains comprise a coherent, low- to medium-K, dominantly tholeiitic suite. REE patterns show moderate LREE-enrichment, with chondrite-normalized La/Yb = 1.5-2. Rear-arc volcanoes sometimes are slightly less fractionated, slightly more potassic, and slightly more LREE-enriched, but these are second order differences. The

  10. Middle Jurassic Topawa group, Baboquivari Mountains, south-central Arizona: Volcanic and sedimentary record of deep basins within the Jurassic magmatic arc

    USGS Publications Warehouse

    Haxel, G.B.; Wright, J.E.; Riggs, N.R.; Tosdal, R.M.; May, D.J.

    2005-01-01

    . This particular view of the arc has been preserved primarily because the Topawa Group accumulated in deep intra-arc basins. These nonmarine basins were fundamentally tectonic and extensional, rather than volcano-tectonic, in origin. Evidence from the Topawa Group supports two previous paleogeographic inferences: the Middle Jurassic magmatic arc in southern Arizona was relatively low standing, and externally derived sediment was introduced into the arc from the continent (northeast) side, without appreciable travel along the arc. We speculate that because the Topawa Group intra-arc basins were deep and rapidly subsiding, they became the locus of a major (though probably intermittent) fluvial system, which flowed into the low-standing magmatic arc from its northeast flank. ?? 2005 Geological Society of America.

  11. The prevalence and bother of lower urinary tract symptoms in men and women aged 40 years or over in Taiwan.

    PubMed

    Liu, Shih-Ping; Chuang, Yao-Chi; Sumarsono, Budiwan; Chang, Hui-Chen

    2018-04-11

    The prevalence of lower urinary tract symptoms (LUTS) in men and women in the general population in Taiwan is unclear. Community-based data on the epidemiology and effects of LUTS would therefore help improve understanding of the condition in this country. This study was an internet-based, self-administered survey, conducted in randomly selected adults aged ≥40 years. Participants answered questions on International Continence Society (ICS) symptom definitions, the International Prostate Symptom Score (IPSS) and the overactive bladder (OAB) symptom score. The study population comprised 2068 adults (51.4% women) with a mean age of 55 years. Using criteria from the ICS, LUTS were present in 60% of men and 57% of women. The prevalence of LUTS increased with age in both men and women. The most bothersome symptoms were terminal dribble, incomplete emptying and nocturia in men, and nocturia, perceived frequency and urgency in women. In the overall population, according to IPSS, 30% had at least moderate symptoms. OAB prevalence was 16% in both men and women. The likelihood of consulting a healthcare professional about urinary symptoms was low and not significantly different between men and women with LUTS (17% and 14%, respectively). More than half of men and women aged ≥40 years in Taiwan are affected by LUTS, and these symptoms are often bothersome. However, few individuals with LUTS consult healthcare professionals about their symptoms. Improved diagnosis and treatment of LUTS in Taiwan are needed to reduce the deleterious effects of the condition. CLINICALTRIALS. NCT02618421. Copyright © 2018. Published by Elsevier B.V.

  12. Influence of residual plasma drift velocity on the post-arc sheath expansion of vacuum circuit breakers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mo, Yongpeng; Shi, Zongqian; Jia, Shenli

    The residual plasma in the inter-contact region of a vacuum circuit breaker moves towards the post-arc cathode at current zero, because the residual plasma mainly comes from the cathode spots during the arc burning process. In the most previous theoretical researches on the post-arc sheath expansion process of vacuum circuit breakers, only the thermal motion of residual plasma was taken into consideration. Alternately, the residual plasma was even assumed to be static at the moment of current zero in some simplified models. However, the influence of residual plasma drift velocity at current zero on the post-arc sheath expansion process wasmore » rarely investigated. In this paper, this effect is investigated by a one-dimensional particle-in-cell model. Simulation results indicate that the sheath expands slower with higher residual plasma drift velocity in the initial sheath expansion stage. However, with the increase of residual plasma drift velocity, the overall plasma density in the inter-contact region decreases faster, and the sheath expansion velocity increases earlier. Consequently, as a whole, it needs shorter time to expel the residual plasma from the inter-contact region. Furthermore, if the residual plasma drift velocity is high enough, the sheath expansion process ceases before it develops to the post-arc anode. Besides, the influence of the collisions between charges and neutrals is investigated as well in terms of the density of metal vapor. It shows that the residual plasma drift velocity takes remarkable effect only if the density of the metal vapor is relatively low, which corresponds to the circumstance of low-current interruptions.« less

  13. Paleo movement of continents, mantle dynamics and large wander of the rotational pole

    NASA Astrophysics Data System (ADS)

    Greff-Lefftz, M.; Besse, J.

    2010-12-01

    Polar wander is known to be mainly linked to mass distribution changes in its mantle or surface, and more particularly to subductions evolution. On one hand, the peri-pacific subductions seem to be a quite permanent feature of the earth's history at least since the Paleozoic, while the "Tethyan" subductions have a complex history with successive collisions of continental blocs (Hercynian, Kimmerian, Indian) and episodically rebirth of E-W subduction zones. We investigate plate motion during the last 350 million years in a reference frame where Africa is fixed, this last plate being a central plate from which most continents diverged since Pangea break-up. The exact amount of subduction is unknown before 120 Ma and we try to estimate it from the study of the subduction volcanism in the past and plate motion history, when available. Assuming that the subducted slabs sink vertically into the mantle and taking into account large-scale upwellings derived from present-day tomography and intra-plate volcanism in the past, we compute the time variation of mantle density heterogeneities since 350 Ma. By conservation of the angular momentum of the Earth, the temporal evolution of the rotational axis, with respect to the fixed Africa, is computed and compared to the Apparent Polar Wander (APW) observed by paleomagnetism since 280 Ma. We find that a major trend of the computed APW can be described as successive oscillatory clockwise or counter-clockwise motions and that the cusps (around 230 Ma and 170 Ma), both in the observed Africa APW and in the computed pole, are essentially due to the Hercynian (340-300 Ma) and Kimmerian (270-230 Ma) continental collisions.

  14. Unzipping of the volcano arc, Japan

    USGS Publications Warehouse

    Stern, R.J.; Smoot, N.C.; Rubin, M.

    1984-01-01

    A working hypothesis for the recent evolution of the southern Volcano Arc, Japan, is presented which calls upon a northward-progressing sundering of the arc in response to a northward-propagating back-arc basin extensional regime. This model appears to explain several localized and recent changes in the tectonic and magrnatic evolution of the Volcano Arc. Most important among these changes is the unusual composition of Iwo Jima volcanic rocks. This contrasts with normal arc tholeiites typical of the rest of the Izu-Volcano-Mariana and other primitive arcs in having alkaline tendencies, high concentrations of light REE and other incompatible elements, and relatively high silica contents. In spite of such fractionated characteristics, these lavas appear to be very early manifestations of a new volcanic and tectonic cycle in the southern Volcano Arc. These alkaline characteristics and indications of strong regional uplift are consistent with the recent development of an early stage of inter-arc basin rifting in the southern Volcano Arc. New bathymetric data are presented in support of this model which indicate: 1. (1) structural elements of the Mariana Trough extend north to the southern Volcano Arc. 2. (2) both the Mariana Trough and frontal arc shoal rapidly northwards as the Volcano Arc is approached. 3. (3) rugged bathymetry associated with the rifted Mariana Trough is replaced just south of Iwo Jima by the development of a huge dome (50-75 km diameter) centered around Iwo Jima. Such uplifted domes are the immediate precursors of rifts in other environments, and it appears that a similar situation may now exist in the southern Volcano Arc. The present distribution of unrifted Volcano Arc to the north and rifted Mariana Arc to the south is interpreted not as a stable tectonic configuration but as representing a tectonic "snapshot" of an arc in the process of being rifted to form a back-arc basin. ?? 1984.

  15. Welding arc initiator

    DOEpatents

    Correy, Thomas B.

    1989-01-01

    An improved inert gas shielded tungsten arc welder is disclosed of the type wherein a tungsten electrode is shielded within a flowing inert gas, and, an arc, following ignition, burns between the energized tungsten electrode and a workpiece. The improvement comprises in combination with the tungsten electrode, a starting laser focused upon the tungsten electrode which to ignite the electrode heats a spot on the energized electrode sufficient for formation of a thermionic arc. Interference problems associated with high frequency starters are thus overcome.

  16. Welding arc initiator

    DOEpatents

    Correy, T.B.

    1989-05-09

    An improved inert gas shielded tungsten arc welder is disclosed of the type wherein a tungsten electrode is shielded within a flowing inert gas, and, an arc, following ignition, burns between the energized tungsten electrode and a workpiece. The improvement comprises in combination with the tungsten electrode, a starting laser focused upon the tungsten electrode which to ignite the electrode heats a spot on the energized electrode sufficient for formation of a thermionic arc. Interference problems associated with high frequency starters are thus overcome. 3 figs.

  17. The Malone antegrade continence enema for neurogenic and structural fecal incontinence and constipation.

    PubMed

    Koyle, M A; Kaji, D M; Duque, M; Wild, J; Galansky, S H

    1995-08-01

    Problems of fecal elimination are commonly encountered by the pediatric urologist and surgeon. The Malone antegrade continence enema has been described as a means to administer a large volume enema via a continent catheterizable appendicocecostomy, resulting in reliable fecal elimination. Of 22 patients undergoing this procedure 16 reported total continence 4 months or longer after surgery. Complications are relatively minor and tap water appears to be a safe solution for the antegrade continence enema. A nonrefluxing, imbricated appendicocecostomy is preferable to prevent cutaneous fecal or gas leaks.

  18. Comparing global-scale topographic and climatic metrics to long-term erosion rates using ArcSwath, an efficient new ArcGIS tool for swath profile analysis

    NASA Astrophysics Data System (ADS)

    Blomqvist, Niclas; Whipp, David

    2016-04-01

    The topography of the Earth's surface is the result of the interaction of tectonics, erosion and climate. Thus, topography should contain a record of these processes that can be extracted by topographic analysis. The question considered in this study is whether the spatial variations in erosion that have sculpted the modern topography are representative of the long-term erosion rates in mountainous regions. We compare long-term erosion rates derived from low-temperature thermochronometry to erosional proxies calculated from topographic and climatic data analysis. The study has been performed on a global scale including six orogens: The Himalaya, Andes, Taiwan, Olympic Mountains, Southern Alps in New Zealand and European Alps. The data was analyzed using a new swath profile analysis tool for ArcGIS called ArcSwath (https://github.com/HUGG/ArcSwath) to determine the correlations between the long-term erosion rates and modern elevations, slope angles, relief in 2.5-km- and 5-km-diameter circles, erosion potential, normalized channel steepness index ksn, and annual rainfall. ArcSwath uses a Python script that has been incorporated into an ArcMap 10.2 add-in tool, extracting swath profiles in about ten seconds compared to earlier workflows that could take more than an hour. In ArcMap, UTM-projected point or raster files can be used for creating swath profiles. Point data are projected onto the swath and the statistical parameters (minimum, mean and maximum of the values across the swath) are calculated for the raster data. Both can be immediately plotted using the Python matplotlib library, or plotted externally using the csv-file that is produced by ArcSwath. When raster and point data are plotted together, it is easier to make comparisons and see correlations between the selected data. An unambiguous correlation between the topographic or climatic metrics and long-term erosion rates was not found. Fitting of linear regression lines to the topographic/ climatic metric

  19. Contribution For Arc Temperature Affected By Current Increment Ratio At Peak Current In Pulsed Arc

    NASA Astrophysics Data System (ADS)

    Kano, Ryota; Mitubori, Hironori; Iwao, Toru

    2015-11-01

    Tungsten Inert Gas (TIG) Welding is one of the high quality welding. However, parameters of the pulsed arc welding are many and complicated. if the welding parameters are not appropriate, the welding pool shape becomes wide and shallow.the convection of driving force contributes to the welding pool shape. However, in the case of changing current waveform as the pulse high frequency TIG welding, the arc temperature does not follow the change of the current. Other result of the calculation, in particular, the arc temperature at the reaching time of peak current is based on these considerations. Thus, the accurate measurement of the temperature at the time is required. Therefore, the objective of this research is the elucidation of contribution for arc temperature affected by current increment ratio at peak current in pulsed arc. It should obtain a detail knowledge of the welding model in pulsed arc. The temperature in the case of increment of the peak current from the base current is measured by using spectroscopy. As a result, when the arc current increases from 100 A to 150 A at 120 ms, the transient response of the temperature didn't occur during increasing current. Thus, during the current rise, it has been verified by measuring. Therefore, the contribution for arc temperature affected by current increment ratio at peak current in pulsed arc was elucidated in order to obtain more knowledge of welding model of pulsed arc.

  20. Impact of a continence training program on patient safety and quality.

    PubMed

    Grandstaff, Marcia; Lyons, Deborah

    2012-01-01

    The purpose of this study is to examine the impact of an evidence-based training program on patient outcomes of continence, falls, and discharge disposition in the rehab population. Criteria for inclusion required new onset of two or more episodes of urinary incontinence. Sixty-six subjects were enrolled with 33 subjects receiving evidence-based interventions. The intervention group showed improvement in continence (p = .020), with no difference between groups on discharge disposition (p = .744). Results showed an unexpected higher occurrence of falls in the treatment group (p = .000). DISCUSSION AND CLINICAL RELEVANCE: This study supports existing literature indicating that continence is not an independent predictor of nursing home admission and offers new evidence that use of an evidence-based intervention bundle can significantly improve patient continence including those patients with mild to moderate cognitive impairment. © 2012 Association of Rehabilitation Nurses.

  1. Tectonostratigraphic reconstruction Cretaceous volcano-sedimentary in the northwestern Andes: from extensional tectonics to arc accretion.

    NASA Astrophysics Data System (ADS)

    Zapata, S.; Patino, A. M.; Cardona, A.; Mejia, D.; Leon, S.; Jaramillo, J. S.; Valencia, V.; Parra, M.; Hincapie, S.

    2014-12-01

    associated with a continental terrane.This two volcano-sedimentary domains were finally juxtaposed due to the collision with an allochthonous oceanic arc that collide with the Continental margin in the Late Cretaceous marking the initiation of the Andean Orogeny.

  2. Magmatic evolution of Panama Canal volcanic rocks: A record of arc processes and tectonic change

    PubMed Central

    Cardona, Agustin; Montes, Camilo; Foster, David; Jaramillo, Carlos

    2017-01-01

    Panama arc crust fractured during collision with South America forming the observed Canal extensional zone. PMID:28489866

  3. Magmatic evolution of Panama Canal volcanic rocks: A record of arc processes and tectonic change.

    PubMed

    Farris, David W; Cardona, Agustin; Montes, Camilo; Foster, David; Jaramillo, Carlos

    2017-01-01

    arc crust fractured during collision with South America forming the observed Canal extensional zone.

  4. Failed pelvic pouch substituted by continent ileostomy.

    PubMed

    Wasmuth, H H; Tranø, G; Wibe, A; Endreseth, B H; Rydning, A; Myrvold, H E

    2010-07-01

    The long-term failure rate of ileal pouch-anal anastomosis (IPAA) is 10-15%. When salvage surgery is unsuccessful, most surgeons prefer pouch excision with conventional ileostomy, thus sacrificing 40-50 cm of ileum. Conversion of a pelvic pouch to a continent ileostomy (CI, Kock pouch) is an alternative that preserves both the ileal surface and pouch properties. The aim of the study was to evaluate clinical outcome after the construction of a CI following a failed IPAA. During 1984-2007, 317 patients were operated with IPAA at St Olavs Hospital and evaluated for failure, treatment and outcome. Seven patients with IPAA failure had CI. Four patients with IPAA failure referred from other hospitals underwent conversion to CI and are included in the final analysis. Seven patients had a CI constructed from the transposing pelvic pouch and four had the pelvic pouch removed and a new continent pouch constructed from the distal ileum. Median follow up after conversion to CI was 7 years (0-17 years). Two CI had to be removed due to fistulae. One patient needed a revision of the nipple valve due to pouch loosening. At the end of follow-up, 8 of the 11 patients were fully continent. One patient with Crohn's disease had minor leakage. In patients with pelvic pouch failure, the possibility of conversion to CI should be presented to the patient as an alternative to pouch excision and permanent ileostomy. The advantage is the continence and possibly a better body image. Construction of a CI on a new ileal segment may be considered, but the consequences of additional small bowel loss and risk of malnutrition if the Kock pouch fails should be appraised.

  5. Ambient noise tomography of Ecuador: Fore- and back-arc velocity structure and radial anisotropy

    NASA Astrophysics Data System (ADS)

    Lynner, C.; Beck, S. L.; Porritt, R.; Meltzer, A.; Alvarado, A. P.; Gabriela, P.; Ruiz, M. C.; Hoskins, M.; Stachnik, J.; Rietbrock, A.; Leon-Rios, S.; Regnier, M. M.; Agurto-Detzel, H.; Font, Y.; Charvis, P.

    2017-12-01

    In northern South America, the oceanic Nazca plate subducts beneath the South American continent, giving rise to the high mountains of the northern Andes. The Ecuador subduction zone has a history of large megathrust earthquakes, most recently the Mw=7.8 April 16, 2016, Pedernales earthquake. The volcanic arc in Ecuador is broad with active volcanoes along both the western and eastern cordilleras. Many of these volcanoes surround the city of Quito putting millions of people at risk. A recent international broadband aftershock deployment was conducted for approximately one year after the Pedernales mainshock and this data combined with a sub-set of data from from the permanent IGEPN national network provide an ideal data set to use for ambient noise tomography (ANT) to constrain absolute Vsh and Vsv across Ecuador. ANT studies use noise-generated surface wave dispersion measurements to invert for 3D shear velocity in the crust. Having a precise understanding of crustal velocity structure is necessary to advance a number of projects, including better earthquake locations of the April 16, 2016 Pedernales-earthquake aftershock sequence and identifying large-scale partial melt zones associated with the active volcanic arc. The majority of ANT studies use only Rayleigh waves to constrain Vsv structure. Initial Rayleigh wave ANT results, using periods between 8 and 40 seconds, show a fast phase velocities for the forearc and much slower phase velocities for the high elevation volcanic arc. Including Love wave dispersion measurements can improve overall crustal velocity models, as well as provide constraints on radial anisotropy. Radial anisotropy can develop in a variety of ways but most typically arises from the deformation-induced alignment of anisotropic minerals. Radial anisotropy, therefore, can inform on patterns of ductile crustal flow. Strong radial anisotropy at mid-crustal depths from ANT has already been observed south of Ecuador, in the Central Andean Plateau

  6. Herbal Medicine Research in Taiwan*

    PubMed Central

    Kaphle, Krishna; Wu, Leang-Shin; Yang, Nai-Yen Jack; Lin, Jen-Hsou

    2006-01-01

    Of all the countries in the world, why did you choose Taiwan to pursue your study? It is a question that I (comments of the first author) have answered a thousand times. My first visit to a laboratory at National Taiwan University opened my eyes to the possibilities of herbal medicine research, especially in the area of veterinary medicine. It became my ambition to link the knowledge of Traditional Chinese Medicine (TCM) and Ayurveda from the Indian subcontinent and their integration with other systems of medicine, including Western medicine (WM), to achieve the concept of Sustainable Medicine, firstly for animals and then for humans. The Ministry of Economic Affairs (MOEA) has implemented a technology development program to quickly establish the key technologies, and this is a moment of opportunity for Taiwan's traditional herbal medicine industry to upgrade and transform itself. This paper, initially intended to be a student's narration, has evolved into a multi-author treatise on the present state and likely future scenario of herbal medicine research in Taiwan. PMID:16550238

  7. Growth model for arc-deposited fullerene-like CNx nanoparticles.

    PubMed

    Veisz, Bernadett; Radnóczi, György

    2005-06-01

    Multiwall CNx nanotubes, nanoonions, and amorphous nanoballs were formed by carbon DC arc evaporation in a nitrogen atmosphere. The samples were investigated by conventional and high-resolution transmission electron microscopy. We propose a fragment-by-fragment growth mechanism for the formation of the nanoparticles. Accordingly, particles and aggregates of particles form in the vacuum ambient by the collisions between atomic species and small fragments. This growth model is supported by the discontinuous inner shells and disordered surface layers composed from graphene fragments. Image simulations confirm the detectability of dangling and back-folding surface layers in the experimental images. Further, the simulated images also confirm that the growth of nanoonions starts from a single fullerene-like seed. The amorphous nanoballs form when ordering of the building blocks during growth is hindered by the cross-linking nitrogen bonds. Copyright (c) 2005 Wiley-Liss, Inc.

  8. The thermal influence of continents on a model-generated January climate

    NASA Technical Reports Server (NTRS)

    Spar, J.; Cohen, C.; Wu, P.

    1981-01-01

    Two climate simulations were compared. Both climate computations were initialized with the same horizontally uniform state of rest. However, one is carried out on a water planet (without continents), while the second is repeated on a planet with geographically realistic but flat (sea level) continents. The continents in this experiment have a uniform albedo of 0.14, except where snow accumulates, a uniform roughness height of 0.3 m, and zero water storage capacity. Both runs were carried out for a 'perpetual January' with solar declination fixed at January 15.

  9. Impact of abuse-deterrent OxyContin on prescription opioid utilization.

    PubMed

    Hwang, Catherine S; Chang, Hsien-Yen; Alexander, G Caleb

    2015-02-01

    We quantified the degree to which the August 2010 reformulation of abuse-deterrent OxyContin affected its use, as well as the use of alternative extended-release and immediate-release opioids. We used the IMS Health National Prescription Audit, a nationally representative source of prescription activity in the USA, to conduct a segmented time-series analysis of the use of OxyContin and other prescription opioids. Our primary time period of interest was 12 months prior to and following August 2010. We performed model checks and sensitivity analyses, such as adjusting for marketing and promotion, using alternative lag periods, and adding extra observation points. OxyContin sales were similar before and after the August 2010 reformulation, with approximately 550 000 monthly prescriptions. After adjusting for declines in the generic extended-release oxycodone market, the formulation change was associated with a reduction of approximately 18 000 OxyContin prescription sales per month (p = 0.02). This decline corresponded to a change in the annual growth rate of OxyContin use, from 4.9% prior to the reformulation to -23.8% during the year after the reformulation. There were no statistically significant changes associated with the sales of alternative extended-release (p = 0.42) or immediate-release (p = 0.70) opioids. Multiple sensitivity analyses supported these findings and their substantive interpretation. The market debut of abuse-deterrent OxyContin was associated with declines in its use after accounting for the simultaneous contraction of the generic extended-release oxycodone market. Further scrutiny into the effect of abuse-deterrent formulations on medication use and health outcomes is vital given their popularity in opioid drug development. Copyright © 2014 John Wiley & Sons, Ltd.

  10. Large-Scale Crustal-Block-Extrusion During Late Alpine Collision.

    PubMed

    Herwegh, Marco; Berger, Alfons; Baumberger, Roland; Wehrens, Philip; Kissling, Edi

    2017-03-24

    The crustal-scale geometry of the European Alps has been explained by a classical subduction-scenario comprising thrust-and-fold-related compressional wedge tectonics and isostatic rebound. However, massive blocks of crystalline basement (External Crystalline Massifs) vertically disrupt the upper-crustal wedge. In the case of the Aar massif, top basement vertically rises for >12 km and peak metamorphic temperatures increase along an orogen-perpendicular direction from 250 °C-450 °C over horizontal distances of only <15 km (Innertkirchen-Grimselpass), suggesting exhumation of midcrustal rocks with increasing uplift component along steep vertical shear zones. Here we demonstrate that delamination of European lower crust during lithosphere mantle rollback migrates northward in time. Simultaneously, the Aar massif as giant upper crustal block extrudes by buoyancy forces, while substantial volumes of lower crust accumulate underneath. Buoyancy-driven deformation generates dense networks of steep reverse faults as major structures interconnected by secondary branches with normal fault component, dissecting the entire crust up to the surface. Owing to rollback fading, the component of vertical motion reduces and is replaced by a late stage of orogenic compression as manifest by north-directed thrusting. Buoyancy-driven vertical tectonics and modest late shortening, combined with surface erosion, result in typical topographic and metamorphic gradients, which might represent general indicators for final stages of continent-continent collisions.

  11. Paleoproterozoic (ca. 1.8 Ga) arc magmatism in the Lützow-Holm Complex, East Antarctica: Implications for crustal growth and terrane assembly in erstwhile Gondwana fragments

    NASA Astrophysics Data System (ADS)

    Takahashi, Kazuki; Tsunogae, Toshiaki; Santosh, M.; Takamura, Yusuke; Tsutsumi, Yukiyasu

    2018-05-01

    The Lützow-Holm Complex (LHC) of East Antarctica forms a part of the latest Neoproterozoic-Cambrian high-grade metamorphic segment of the East African-Antarctic Orogen. Here we present new petrological, geochemical, and zircon U-Pb geochronological data on meta-igneous rocks from four localities (Austhovde, Telen, Skallevikshalsen, and Skallen) in the LHC, and evaluate the regional Paleoproterozoic (ca. 1.8 Ga) arc magmatism in this terrane for the first time. The geochemical features reveal a volcanic-arc affinity for most of the meta-igneous rocks from Austhovde and Telen, suggesting that the protoliths of these rocks were derived from felsic to mafic arc magmatic rocks. The protoliths of two mafic granulites from Austhovde are inferred as non-volcanic-arc basalt such as E-MORB, suggesting the accretion of remnant oceanic lithosphere together with the volcanic-arc components during the subduction-collision events. The weighted mean 206Pb/238U ages of the dominant population of magmatic zircons in felsic orthogneisses from Austhovde and Telen show 1819 ± 19 Ma and 1830 ± 10 Ma, respectively, corresponding to Paleoproterozoic magmatic event. The magmatic zircons in orthogneisses from other two localities yield upper intercept ages of 1837 ± 54 Ma (Skallevikshalsen), and 1856 ± 37 Ma and 1854 ± 45 Ma (Skallen), which also support Paleoproterozoic magmatism. The earlier thermal events during Neoarchean to Early Paleoproterozoic are also traced by 206Pb/238U ages of xenocrystic zircons in the felsic orthogneisses from Austhovde (2517 ± 17 Ma and 2495 ± 15 Ma) and Telen (2126 ± 16 Ma), suggesting partial reworking of the basement of a 2.5 Ga microcontinent during ca. 1.8 Ga continental-arc magmatism. The timing of peak metamorphism is inferred to be in the range of 645.6 ± 10.4 to 521.4 ± 12.0 Ma based on 206Pb/238U weighted mean ages of metamorphic zircon grains. The results of this study, together with the available magmatic ages as well as geophysical and

  12. [Nursing manpower and solutions in Taiwan].

    PubMed

    Teng, Su-Wen

    2014-04-01

    The shortage of nursing manpower is a long-term problem worldwide that affects Taiwan despite this country's internationally admired achievements in terms of its healthcare and national health insurance systems. This article reviews discussions related to the nursing shortage issue published by the World Health Organization, International Council of Nurses, and Taiwan Ministry of Health and Welfare. Next, an overview is given of the nursing workforce profile, causal factors behind the nursing shortage, and demand for and supply of nursing manpower. Finally, problems, resolutions, and expected outcomes for the nursing shortage in Taiwan are analyzed.

  13. 76 FR 13982 - Antidumping Duty Order: Polyvinyl Alcohol From Taiwan

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-15

    ...: Polyvinyl Alcohol From Taiwan AGENCY: Import Administration, International Trade Administration, Department... on polyvinyl alcohol (PVA) from Taiwan. DATES: Effective Date: March 15, 2011. FOR FURTHER... from Taiwan. See Polyvinyl Alcohol From Taiwan: Final Determination of Sales at Less Than Fair Value...

  14. Seismotectonics of the central segment of the Indonesian Arc

    NASA Astrophysics Data System (ADS)

    Eva, C.; Cattaneo, M.; Merlanti, F.

    1988-01-01

    In this paper, a revision of seismicity affecting the central segment of the Indonesian island arc ranging between 110° and 126° E is presented. Using the areal and in-depth distribution of seismic activity, strain release maps and focal mechanisms, lateral changes in the Wadati-Benioff zone have been analyzed to determine possible boundaries between portions of lithosphere with different subduction geometries. The seismicity pattern indicates that the Sumbawa-Flores-Wetar sector shows different forms of behaviour with respect to the adjacent sectors. These include driving mechanism, inclination and continuity of the subducting slab and subduction features. This area therefore seems to be isolated from the Sunda and Banda arcs by two principal boundaries, these having a nearly N-S trend in the Bali region and with a nearly E-W trend in the region ranging between Wetar-Northern Timor and Tanibar. The first boundary, characterized by an absolute minimum of seismic activity at all ranges of depth, has been interpreted in terms of subduction of the Roo Rise aseismic bathymetric ridge. For the second boundary, dividing a northwardly steeply-dipping slab from an E-W subducting slab dipping with an angle of 30 ° -40 °, a tear in the upper part (depth less than 300 km) and a hinge fault system in the deepest part of the lithosphere, have been proposed. From the analysis of focal mechanisms of shallow earthquakes, it was inferred that the central part of the Indonesian Arc is subject to a vortex-shaped stress field centred on the Savu Basin. In this model, the compressive axes appear to rotate counterclockwise (from SW to NNE) in the Sumba-Sumbawa-Western Flores region and clockwise (from W to NNW) in the Timor-Eastern Flores zone. To interpret these features, on the basis of seismological evidence, a lateral discontinuity in the arc-trench system close to Sumba, a collision between Sumba and Sumbawa and a rotation towards the north-northeast of Sumba have been

  15. Analysis of Arc Characteristics and Flow Field in Arc Chamber of High-Voltage SF6 Auto-Expansion Circuit Breaker

    NASA Astrophysics Data System (ADS)

    Zhang, Junmin; Chen, Zhang

    2008-10-01

    A new magnetic hydro-dynamics model for nozzle arc emphasizing the interaction of arc with PTFE (polytetrafluorethylene) vapour is established based on the conservation equations. The interruption of auto-expansion circuit breaker is simulated numerically by finite element method and the influence of PTFE vapour on the arc is analysed with this model. The results reveal that the flow field inside the arc chamber is determined by the arc current, the arcing time, the nozzle arc and the clogging of its thermal boundary. The establishment of quenching pressure relies on both SF6 gas and PTFE vapour that absorbed arc energy in the nozzle. The PTFE vapour leads to an increase in the pressure of nozzle arc obviously, and a decrease in the temperature of arc. But it enhances the temperature of arc at zero current and slows down the decreasing rate of arc temperature as the current decreases.

  16. Excisional hemorrhoidal surgery and its effect on anal continence

    PubMed Central

    Li, Yan-Dong; Xu, Jia-He; Lin, Jian-Jiang; Zhu, Wei-Fang

    2012-01-01

    AIM: To investigate the role of anal cushions in hemorrhoidectomy and its effect on anal continence of the patients. METHODS: Seventy-six consecutive patients (33 men and 43 women) with a mean age of 44 years were included. They underwent Milligan-Morgan hemorrhoidectomy because of symptomatic third- and fourth-degree hemorrhoids and failure in conservative treatment for years. Wexner score was recorded and liquid continence test was performed for each patient before and two months after operation using the techniques described in our previous work. The speed-constant rectal lavage apparatus was prepared in our laboratory. The device could output a pulsed and speed-constant saline stream with a high pressure, which is capable of overcoming any rectal resistance change. The patients were divided into three groups, group A (< 900 mL), group B (900-1200 mL) and group C (> 1200 mL) according to the results of the preoperative liquid continence test. RESULTS: All the patients completed the study. The average number of hemorrhoidal masses excised was 2.4. Most patients presented with hemorrhoidal symptoms for more than one year, including a mean duration of incontinence of 5.2 years. The most common symptoms before surgery were anal bleeding (n = 55), prolapsed lesion (n = 34), anal pain (n = 12) and constipation (n = 17). There were grade III hemorrhoids in 39 (51.3%) patients, and grade IV in 37 (48.7%) patients according to Goligher classification. Five patients had experienced hemorrhoid surgery at least once. Compared with postoperative results, the retained volume in the preoperative liquid continence test was higher in 40 patients, lower in 27 patients, and similar in the other 9 patients. The overall preoperative retained volume in the liquid continence test was 1130.61 ± 78.35 mL, and postoperative volume was slightly decreased (991.27 ± 42.77 mL), but there was no significant difference (P = 0.057). Difference was significant in the test value before and

  17. Adakites from collision-modified lithosphere

    NASA Astrophysics Data System (ADS)

    Haschke, M.; Ben-Avraham, Z.

    2005-08-01

    Adakitic melts from Papua New Guinea (PNG) show adakitic geochemical characteristics, yet their geodynamic context is unclear. Modern adakites are associated with hot-slab melting and/or remelting of orogenic mafic underplate at convergent margins. Rift-propagation over collision-modified lithosphere may explain the PNG adakite enigma, as PNG was influenced by rapid creation and subduction of oceanic microplates since Mesozoic times. In a new (rift) tectonic regime, decompressional rift melts encountered and melted remnant mafic eclogite and/or garnet-amphibolite slab fragments in arc collisional-modified mantle, and partially equilibrated with metasomatized mantle. Alternatively, hot-slab melting in a proposed newborn subduction zone along the Trobriand Trough could generate adakitic melts, but recent seismic P-wave tomographic models lack evidence for subducting oceanic lithosphere in the adakite melt region; however they do show deep subduction zone remnants as a number of high P-wave anomalies at lithospheric depths, which supports our proposed scenario.

  18. Volcanism in slab tear faults is larger than in island-arcs and back-arcs.

    PubMed

    Cocchi, Luca; Passaro, Salvatore; Tontini, Fabio Caratori; Ventura, Guido

    2017-11-13

    Subduction-transform edge propagators are lithospheric tears bounding slabs and back-arc basins. The volcanism at these edges is enigmatic because it is lacking comprehensive geological and geophysical data. Here we present bathymetric, potential-field data, and direct observations of the seafloor on the 90 km long Palinuro volcanic chain overlapping the E-W striking tear of the roll-backing Ionian slab in Southern Tyrrhenian Sea. The volcanic chain includes arc-type central volcanoes and fissural, spreading-type centers emplaced along second-order shears. The volume of the volcanic chain is larger than that of the neighbor island-arc edifices and back-arc spreading center. Such large volume of magma is associated to an upwelling of the isotherms due to mantle melts upraising from the rear of the slab along the tear fault. The subduction-transform edge volcanism focuses localized spreading processes and its magnitude is underestimated. This volcanism characterizes the subduction settings associated to volcanic arcs and back-arc spreading centers.

  19. Physics teaching in the medical schools of Taiwan.

    PubMed

    Hsu, Jiann-wien; Hsu, Roy

    2012-02-01

    We describe and analyze the statistics of general physics and laboratory courses in the medical schools of Taiwan. We explore the development of the general physics curriculum for medical students of Taiwan. Also, an approach to designing a general physics course in combination with its application to medical sciences is proposed. We hope this preliminary study can provide a useful reference for physics colleagues in the medical schools of Taiwan to revolutionize the dynamics of teaching physics to the medical students of Taiwan. Copyright © 2011. Published by Elsevier B.V.

  20. Land, carbon and water footprints in Taiwan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lee, Yung-Jaan, E-mail: yungjaanlee@gmail.com

    The consumer responsibility approach uses footprints as indicators of the total direct and indirect effects of a product or consumption activity. This study used a time-series analysis of three environmental pressures to quantify the total environmental pressures caused by consumption in Taiwan: land footprint, carbon footprint, and water footprint. Land footprint is the pressure from appropriation of biologically productive land and water area. Carbon footprint is the pressure from greenhouse gas emissions. Water footprint is the pressure from freshwater consumption. Conventional carbon footprint is the total CO{sub 2} emitted by a certain activity or the CO{sub 2} accumulation during amore » product life cycle. This definition cannot be used to convert CO{sub 2} emissions into land units. This study responds to the needs of “CO{sub 2} land” in the footprint family by applying the carbon footprint concept used by GFN. The analytical results showed that consumption by the average Taiwan citizen in 2000 required appropriation of 5.39 gha (hectares of land with global-average biological productivity) and 3.63 gha in 2011 in terms of land footprint. The average Taiwan citizen had a carbon footprint of 3.95 gha in 2000 and 5.94 gha in 2011. These results indicate that separately analyzing the land and carbon footprints enables their trends to be compared and appropriate policies and strategies for different sectors to be proposed accordingly. The average Taiwan citizen had a blue water footprint of 801 m{sup 3} in 2000 and 784 m{sup 3} in 2011. By comparison, their respective global averages were 1.23 gha, 2.36 gha and 163 m{sup 3} blue water in 2011, respectively. Overall, Taiwan revealed higher environmental pressures compared to the rest of the world, demonstrating that Taiwan has become a high footprint state and has appropriated environmental resources from other countries. That is, through its imports of products with embodied pressures and its exports

  1. Tectonic implications of a paleomagnetic direction obtained from a Miocene dike swarm in central Honshu, Japan

    NASA Astrophysics Data System (ADS)

    Hoshi, H.; Sugisaki, Y.

    2017-12-01

    Central Honshu of Japan is an ideal field for the study of crustal deformation related to arc-arc collision. In this study we obtained rock magnetic and paleomagnetic results from early Miocene igneous rocks in central Honshu in order to examine rotational deformation caused by the collision of the Izu-Bonin-Mariana (IBM) arc with central Honshu. In Takane of the Hida region, gabbro intrusions and older sedimentary rocks are intruded by numerous andesitic dikes that comprise a parallel dike swarm. The dikes formed under two different normal-faulting paleostress conditions, which were suggested using a method of clustering dike orientations. Cross-cutting relationships indicate that the two paleostress conditions existed during the same period. More than 240 oriented cores were taken at 38 sites in two localities for magnetic study. The andesites and gabbros generally have magnetite, and some andesites also contain pyrrhotite. The magnetite records easterly deflected remanent magnetization directions of dual polarities that pass the reversals test. Positive baked contact tests at two sites demonstrate that the easterly deflected direction is a thermoremanent magnetization acquired at the time of intrusion. The overall in situ (i.e., in geographic coordinates) mean direction for andesitic dikes is judged to be highly reliable, although there are two possible scenarios for explaining the easterly deflection: (1) clockwise rotation and (2) tilting to the northwest. We prefer the former scenario and conclude that 45° clockwise rotation occurred in Takane with respect to the North China Block of the Asian continent. This rotation must represent the clockwise rotation of entire Southwest Japan during the opening period of the Japan Sea. Very little difference is observed between the amount of the easterly deflection in Takane and those in the Tokai and Hokuriku regions, indicating no significant relative rotation. Thus, the crust beneath Takane has not suffered rotation

  2. Tectonic stresses seaward of an aseismic ridge—Trench collision zone. A remote sensing approach on the Loyalty Islands, SW Pacific

    NASA Astrophysics Data System (ADS)

    Bogdanov, Igor; Huaman, David; Thovert, Jean-François; Genthon, Pierre; Adler, Pierre M.

    2011-03-01

    The Loyalty Islands are a series of limestone karstified islands on the Australian Plate that are presently approaching the Vanuatu subduction zone (SW Pacific). They are deformed due to the combined effects of the bulging of the subducting lithosphere and the beginning collision between the Loyalty Ridge and the Vanuatu subduction zone. Therefore, they constitute a series of markers for early phases of ridge arc collision. Lineaments deduced from remote sensing images (aerial photos, SPOT3, SPOT4 and ENVISAT data), termed here as fractures, are analyzed by comparison with planar structures measured during field studies and termed as geological data. Fracture data indicate a stable main N110 direction with a large variance of nearly 15° in rms and two minor directions 45° apart which may constitute shear directions associated to the major one. A scale dependent analysis shows that fractures longer than 2000 m are close to the N110 direction and that their orientation shifts progressively to reach the N125 direction for L < 400 m. Geological data which are generally measured on 1-10 m long structures, reveal a main N135 direction in Lifou, which may be considered as the continuation of the trend of fracture data for decreasing lengths, and are dispersed in Maré. Since the shortest scale structures are being subjected to local disturbances, the longest ones are considered as indicative of the present stress state of the Loyalty Islands. They are modeled as tension cracks resulting from the elastic bulging of the Australian lithosphere before its subduction at the Vanuatu Trench and from a single force corresponding to the beginning collision. It is suggested that the stress field deduced from this model may help constraining general models of ridge arc collision and that the Vanuatu-New Caledonia region could be a valuable natural example to calibrate such models.

  3. PREFACE: XXV International Conference on Photonic, Electronic and Atomic Collisions

    NASA Astrophysics Data System (ADS)

    Becker, Uwe; Moshammer, Robert; Mokler, Paul; Ullrich, Joachim

    2007-07-01

    The XXVth ICPEAC in Freiburg marked a notable anniversary in collision physics: half a century ago the first conference in the series of International Conferences on the Physics of Electronic and Atomic Collisions (ICPEAC) was held in New York (1958). Since then, the development of electronic and atomic collision physics has seen tremendous progress. Starting during a time, when this field was regarded as somehow out-of-date, certainly not being in the main stream compared to particle and high-energy physics, it has expanded in a rather exceptional and unforeseen way. Over the years the original scope on electronic, atomic and heavy-ion collision physics was extended substantially to include upcoming expanding fields like synchrotron-radiation and strong-field laser-based atomic and molecular physics giving rise to a change of name to 'Photonic', Electronic and Atomic Collisions (ICPEAC) being used for the first time for the ICPEAC in Santa Fee in 2001. Nowadays, the ICPEAC has opened its agenda even more widely to other fields of atomic and molecular physics, such as interactions with clusters, bio-molecules and surfaces, to cold collisions, coherent control, femto- and attosecond physics and, with the Freiburg conference, to the application of free-electron lasers in the vacuum ultraviolet and soft x-ray regime, a field of potentially huge future impact in essentially all areas of science. In this larger context the XXVth ICPEAC in Freiburg with more than 800 participants set new standards. Representatives from all fields of Atomic, Molecular and Photon-based science came together and had very fruitful, inter-disciplinary discussions. This new forum of collision-based AMP physics will serve as a showcase example of future conferences, bridging not only the gap between different fields of collision physics but also, equally important, between different continents and cultures. The next ICPEAC is going to take place in Kalamazoo in North America, the one after that

  4. Magnification Bias in Gravitational Arc Statistics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Caminha, G. B.; Estrada, J.; Makler, M.

    2013-08-29

    The statistics of gravitational arcs in galaxy clusters is a powerful probe of cluster structure and may provide complementary cosmological constraints. Despite recent progresses, discrepancies still remain among modelling and observations of arc abundance, specially regarding the redshift distribution of strong lensing clusters. Besides, fast "semi-analytic" methods still have to incorporate the success obtained with simulations. In this paper we discuss the contribution of the magnification in gravitational arc statistics. Although lensing conserves surface brightness, the magnification increases the signal-to-noise ratio of the arcs, enhancing their detectability. We present an approach to include this and other observational effects in semi-analyticmore » calculations for arc statistics. The cross section for arc formation ({\\sigma}) is computed through a semi-analytic method based on the ratio of the eigenvalues of the magnification tensor. Using this approach we obtained the scaling of {\\sigma} with respect to the magnification, and other parameters, allowing for a fast computation of the cross section. We apply this method to evaluate the expected number of arcs per cluster using an elliptical Navarro--Frenk--White matter distribution. Our results show that the magnification has a strong effect on the arc abundance, enhancing the fraction of arcs, moving the peak of the arc fraction to higher redshifts, and softening its decrease at high redshifts. We argue that the effect of magnification should be included in arc statistics modelling and that it could help to reconcile arcs statistics predictions with the observational data.« less

  5. Consolidating NASA's Arc Jets

    NASA Technical Reports Server (NTRS)

    Balboni, John A.; Gokcen, Tahir; Hui, Frank C. L.; Graube, Peter; Morrissey, Patricia; Lewis, Ronald

    2015-01-01

    The paper describes the consolidation of NASA's high powered arc-jet testing at a single location. The existing plasma arc-jet wind tunnels located at the Johnson Space Center were relocated to Ames Research Center while maintaining NASA's technical capability to ground-test thermal protection system materials under simulated atmospheric entry convective heating. The testing conditions at JSC were reproduced and successfully demonstrated at ARC through close collaboration between the two centers. New equipment was installed at Ames to provide test gases of pure nitrogen mixed with pure oxygen, and for future nitrogen-carbon dioxide mixtures. A new control system was custom designed, installed and tested. Tests demonstrated the capability of the 10 MW constricted-segmented arc heater at Ames meets the requirements of the major customer, NASA's Orion program. Solutions from an advanced computational fluid dynamics code were used to aid in characterizing the properties of the plasma stream and the surface environment on the calorimeters in the supersonic flow stream produced by the arc heater.

  6. Geochronology of the proterozoic basement of southwesternmost North America, and the origin and evolution of the Mojave crustal province

    USGS Publications Warehouse

    Barth, Andrew P.; Wooden, Joseph L.; Coleman, Drew S.; Fanning, C. Mark

    2000-01-01

    The Proterozoic Baldwin gneiss in the central Transverse Ranges of southern California, a part of the Mojave crustal province, is composed of quartzofeldspathic gneiss and schist, augen and granitic gneiss, trondhjemite gneiss, and minor quartzite, amphibolite, metagabbro, and metapyroxenite. Sensitive high resolution ion microprobe (SHRIMP) data indicate that augen and granitic gneisses comprise a magmatic arc intrusive suite emplaced between 1783 ± 12 and 1675 ± 19 Ma, adjacent to or through thinned Archean crust. High U/Th rims on zircons in most samples suggest an early metamorphic event at ∼1741 Ma, but peak amphibolite facies metamorphism and penetrative, west vergent deformation occurred after 1675 Ma. The Baldwin gneiss is part of a regional allochthon emplaced by west vergent deformation over a Proterozoic shelf-slope sequence (Joshua Tree terrane). We hypothesize that emplacement of this regional allochthon occurred during a late Early or Middle Proterozoic arc-continent collision along the western margin of Laurentia.

  7. Effect of laser pulse on alternative current arc discharge during laser-arc hybrid welding of magnesium alloy

    NASA Astrophysics Data System (ADS)

    Chen, Minghua; Xin, Lijun; Zhou, Qi; He, Lijia; Wu, Fufa

    2018-01-01

    The coupling effect between a laser and arc plasma was studied in situations in which the laser acts at the positive and negative waveforms of the arc discharge during the laser-arc hybrid welding of magnesium alloy. Using the methods of direct observation, high speed imaging, and spectral analysis, the surface status of weld seams, weld penetration depths, plasma behavior, and spectral characteristics of welding plasma were investigated, respectively. Results show that, as compared with the laser pulse acting at the negative waveform of the arc plasma discharge, a better weld seam formation can be achieved when the laser pulse acts at the positive waveform of the arc discharge. At the same time, the radiation intensity of Mg atoms in the arc plasma increases significantly. However, the weld penetration depth is weaker. The findings show that when the laser pulse is acting at the negative waveform of the arc plasma discharge, the position of the arc plasma discharge on the workpiece can be restrained by the laser action point, which improves the energy density of the welding arc.

  8. Dosimetric comparison of helical tomotherapy, RapidArc, and a novel IMRT & Arc technique for esophageal carcinoma.

    PubMed

    Martin, Spencer; Chen, Jeff Z; Rashid Dar, A; Yartsev, Slav

    2011-12-01

    To compare radiotherapy treatment plans for mid- and distal-esophageal cancer with primary involvement of the gastroesophageal (GE) junction using a novel IMRT & Arc technique (IMRT & Arc), helical tomotherapy (HT), and RapidArc (RA1 and RA2). Eight patients treated on HT for locally advanced esophageal cancer with radical intent were re-planned for RA and IMRT&Arc. RA plans employed single and double arcs (RA1 and RA2, respectively), while IMRT&Arc plans had four fixed-gantry IMRT fields and a conformal arc. Dose-volume histogram statistics, dose uniformity, and dose homogeneity were analyzed to compare treatment plans. RA2 plans showed significant improvement over RA1 plans in terms of OAR dose and PTV dose uniformity and homogeneity. HT plan provided best dose uniformity (p=0.001) and dose homogeneity (p=0.002) to planning target volume (PTV), while IMRT&Arc and RA2 plans gave lowest dose to lungs among four radiotherapy techniques with acceptable PTV dose coverage. Mean V(10) of the lungs was significantly reduced by the RA2 plans compared to IMRT&Arc (40.3%, p=0.001) and HT (66.2%, p<0.001) techniques. Mean V(15) of the lungs for the RA2 plans also showed significant improvement over the IMRT&Arc (25.2%, p=0.042) and HT (34.8%, p=0.027) techniques. These improvements came at the cost of higher doses to the heart volume compared to HT and IMRT&Arc techniques. Mean lung dose (MLD) for the IMRT&Arc technique (21.2 ± 5.0% of prescription dose) was significantly reduced compared to HT (26.3%, p=0.004), RA1 (23.3%, p=0.028), and RA2 (23.2%, p=0.017) techniques. The IMRT&Arc technique is a good option for treating esophageal cancer with thoracic involvement. It achieved optimal low dose to the lungs and heart with acceptable PTV coverage. HT is a good option for treating esophageal cancer with little thoracic involvement as it achieves superior dose conformality and uniformity. The RA2 technique provided for improved treatment plans using additional arcs with low

  9. Differential effects of cough, valsalva, and continence status on vesical neck movement.

    PubMed

    Howard, D; Miller, J M; Delancey, J O; Ashton-Miller, J A

    2000-04-01

    We tested the null hypothesis that vesical neck descent is the same during a cough and during a Valsalva maneuver. We also tested the secondary null hypothesis that differences in vesical neck mobility would be independent of parity and continence status. Three groups were included: 17 nulliparous continent (31.3 +/- 5.6; range 22-42 years), 18 primiparous continent (30.4 +/- 4.3; 24-43), and 23 primiparous stress-incontinent (31.9 +/- 3.9; 25-38) women. Measures of vesical neck position at rest and during displacement were obtained by ultrasound. Abdominal pressures were recorded simultaneously using an intravaginal microtransducer catheter. To control for differing abdominal pressures, the stiffness of the vesical neck support was calculated by dividing the pressure exerted during a particular effort by the urethral descent during that effort. The primiparous stress-incontinent women displayed similar vesical neck mobility during a cough effort and during a Valsalva maneuver (13.8 mm compared with 14.8 mm; P =.49). The nulliparous continent women (8.2 mm compared with 12.4 mm; P =. 001) and the primiparous continent women (9.9 mm compared with 14.5 mm; P =.002) displayed less mobility during a cough than during a Valsalva maneuver despite greater abdominal pressure during cough. The nulliparas displayed greater pelvic floor stiffness during a cough compared with the continent and incontinent primiparas (22.7, 15.5, 12.2 cm H(2)O/mm, respectively; P =.001). There are quantifiable differences in vesical neck mobility during a cough and Valsalva maneuver in continent women. This difference is lost in the primiparous stress-incontinent women.

  10. From waste minimization to ISO 14000: Taiwan`s experience and prospects

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wen-Huei Chen; Wain-Sun Hou

    Taiwan has completed a very successful five-year industrial waste minimization (IWM) demonstration and promotion project sponsored by the government. From 1990 to 1995, the project successfully disseminated the IWM concept of pollution prevention (P2) to industries. It effectively reduced industrial waste while significantly benefitting the economy by assisting industries in implementing in-plant IWM programs. In July 1995, the second stage of the five-year IWM and ISO 14000 promotion project was initiated for further promoting the IWM, P2, and cleaner production and, in particular, coping with the upcoming international environmental management standards (ISO 14000). To assist industries in establishing an environmentalmore » management system (EMS) and accumulating related experience, an EMS pilot demonstration project of five model industries and an ISO 14001 EMS demonstration and promotion project for 22 factories in 13 industries were initiated in October 1995 and August 1996, respectively. These projects can assist Taiwan`s industries in changing the constitution of their enterprises, enhancing competition in the international market, and helping our nation achieve the forerunner`s profits in sustainable development. 9 refs., 3 figs.« less

  11. Back-arc basin opening and closure along the southern margin of the Sea of Japan

    NASA Astrophysics Data System (ADS)

    Sato, Hiroshi; Claringbould, Johan; Ishiyama, Tatsuya; Kato, Naoko; Abe, Susumu; Kawasaki, Shinji

    2016-04-01

    Following the tsunami disaster produced by 2001 Off-Tohoku earthquake (M9) along the Pacific coast of Japan, the Japanese government started an intense evaluation of tsunami hazards. This evaluation spanned along the full Japanese coast, including the Sea of Japan coast on the western side of the Japan arc. In the Sea of Japan, tsunamis are produced by crustal faults. As the longer interval of faulting activity, the historical records of tsunamis in the Sea of Japan are not enough for the evaluation of tsunami height. Thus, the evaluation is carried out based on structural analyses of the margin of the Sea of Japan. To get better understanding of the present-day structural geometry and develop a source-fault model in this region, intense seismic reflection profiling has been carried out since 2013. We introduce the results of the seismic reflection profiles and discuss the structural evolution of the southern margin of the Sea of Japan. 2D seismic reflection profiles were acquired using 1950 cu. in. air-gun and 2100 m streamer cable. The seismic profiles provide the image image up to 3 seconds TWT. The southern margin of the Sea of Japan was produced by back-arc opening and post-rift deformation, and the structural evolution of this area is divided into several stages: rifting (25 - 14 Ma), post-rift compression (14 - 5 Ma), weak thrusting (5 - 1 Ma), and strike-slip deformation (1 Ma to present). During the rifting stage that is associated with the fan-shaped opening of the Sea of Japan, grabens and half-grabens were formed trending parallel to the extension of SW-Japan arc. These grabens were filled by syn-rift sediments, and the maximum thickness of basin fill is observed along the southern margin of the rifted crust. The opening of the Sea of Japan ceased as a result of the collision of Izu-Bonin-Mariana arc system at the Izu collision zone on the central part of Honshu, Japan. Soon after the this event, the young Shikoku basin within the Philippine Sea plate

  12. Taiwan's second remote sensing satellite

    NASA Astrophysics Data System (ADS)

    Chern, Jeng-Shing; Ling, Jer; Weng, Shui-Lin

    2008-12-01

    FORMOSAT-2 is Taiwan's first remote sensing satellite (RSS). It was launched on 20 May 2004 with five-year mission life and a very unique mission orbit at 891 km altitude. This orbit gives FORMOSAT-2 the daily revisit feature and the capability of imaging the Arctic and Antarctic regions due to the high enough altitude. For more than three years, FORMOSAT-2 has performed outstanding jobs and its global effectiveness is evidenced in many fields such as public education in Taiwan, Earth science and ecological niche research, preservation of the world heritages, contribution to the International Charter: space and major disasters, observation of suspected North Korea and Iranian nuclear facilities, and scientific observation of the atmospheric transient luminous events (TLEs). In order to continue the provision of earth observation images from space, the National Space Organization (NSPO) of Taiwan started to work on the second RSS from 2005. This second RSS will also be Taiwan's first indigenous satellite. Both the bus platform and remote sensing instrument (RSI) shall be designed and manufactured by NSPO and the Instrument Technology Research Center (ITRC) under the supervision of the National Applied Research Laboratories (NARL). Its onboard computer (OBC) shall use Taiwan's indigenous LEON-3 central processing unit (CPU). In order to achieve cost effective design, the commercial off the shelf (COTS) components shall be widely used. NSPO shall impose the up-screening/qualification and validation/verification processes to ensure their normal functions for proper operations in the severe space environments.

  13. Discussion on ``Dextral transpression in Late Cretaceous continental collision, Sanandaj Sirjan Zone, western Iran'' [Journal of Structural Geology, 22(8) (2000) 1125 1139

    NASA Astrophysics Data System (ADS)

    Numan, Nazar M. S.

    2001-12-01

    The NW-SE trending Alpine Zagros Thrust Belt passes from southwest Iran into northeastern Iraq. Mohajjel and Fergusson contend in their work in Iran on the Sanandaj-Sirjan Zone (with a consistent Zagros trend) that collision of the Afro-Arabian continent and the Iranian microcontinent took place in the Late Cretaceous. It seems that tectonostratigraphic evidence from the neighbouring Iraqi territories, namely the Zagros Thrust Belt in the northern part, the Foreland Belt and the Quasiplatform of the north and the Platform in the western and southern deserts (Fig. 1), chronicles the subductional history in this part of the world to a fair degree of accuracy. It rather provides for an Eocene age of the continental collision between Arabia and the Iranian microcontinent.

  14. Geological Characteristics of Active Methane Expulsion In Accretionary Prism Kaoping Slope Off SW Taiwan

    NASA Astrophysics Data System (ADS)

    Huang, C.; Chien, C.; Yang, T. F.; Lin, S.

    2005-12-01

    The Kaoping Slope off SW Taiwan represents the syn-collision accretionary prism characterized by active NW-trending folding - thrusting structures and high sedimentation rate favoring the formation of gas hydrate. For an assessment of gas hydrate potential in the Kaoping Slope off SW Taiwan, sedimentology, paleontology and geochemistry in box cores and piston cores were studied. BSRs are commonly found in seismic profiles in 400-600 m below seafloor of water depth 2500-1000 m. Active expulsions of methane were found along active thrust faults where sulfate/methane interface could be as shallow as 30 cm and the methane concentration of dissolved gases in bottom water and in pore-space of drilled core samples could be three-four order higher than the normal marine environments. Occurrences of authigenic carbonate and elongated pyrite tubes are correlated with shallow SMI depth and high methane content in bottom water and pore-space of sediment cores. Authigenic carbonates were found in seafloor surface and in 20-25 meters below seafloor. The authigenic carbonate nodules are characterized by irregular shape, whitish color, no visible microfossil, containing native sulfur, pyrites, gypsum, small open spaces, and very depleted carbon isotope (-54 ~ -43 per mil PDB). Tiny native sulfur and gypsum crystals were commonly found either on surface of foraminiferal tests and elongated pyrite tubes or in the authigenic carbonate nodules. Morphological measurements of elongated pyrite tubes show that they could represent pseudomorphs after three types of Pogonophora tube worm. Foraminifers are commonly filled by rhomboidal pyrites or cemented by pyrite crystals. Normal marine benthic foraminifers predominated by calcareous tests of slope fauna are associated with authigenic carbonate nodules in the study area, suggesting no major geochemistry effect on distribution of benthic foraminifers. Integrating sedimentology, paleontology and geochemistry characters, there could be high

  15. Insights from 3D numerical simulations on the dynamics of the India-Asia collision zone

    NASA Astrophysics Data System (ADS)

    Pusok, A. E.; Kaus, B.; Popov, A.

    2013-12-01

    The dynamics of the India-Asia collision zone remains one of the most remarkable topics of the current research interest: the transition from subduction to collision and uplift, followed by the rise of the abnormally thick Tibetan plateau, and the deformation at its Eastern and Western syntaxes, are processes still not fully understood. Models that have addressed this topic include wholescale underthrusting of Indian lithospheric mantle under Tibet, distributed homogeneous shortening or the thin-sheet model, slip-line field model for lateral extrusion or lower crustal flow models for the exhumation of the Himalayan units and lateral spreading of the Tibetan plateau. Of these, the thin-sheet model has successfully illustrated some of the basic physics of continental collision and has the advantage of a 3D model being reduced to 2D, but one of its major shortcomings is that it cannot simultaneously represent channel flow and gravitational collapse of the mantle lithosphere, since these mechanisms require the lithosphere to interact with the underlying mantle, or to have a vertically non-homogeneous rheology. As a consequence, 3D models are emerging as powerful tools to understand the dynamics of coupled systems. However, because of yet recent developments and various complexities, the current 3D models simulating the dynamics of continent collision zones have relied on certain explicit assumptions, such as replacing part of the asthenosphere with various types of boundary conditions that mimic the effect of mantle flow, in order to focus on the lithospheric/crustal deformation. Here, we employ the parallel 3D code LaMEM (Lithosphere and Mantle Evolution Model), with a finite difference staggered grid solver, which is capable of simulating lithospheric deformation while simultaneously taking mantle flow and a free surface into account. We present qualitative results on lithospheric and upper-mantle scale simulations in which the Indian lithosphere is subducted and

  16. Multiphysics Simulation of Welding-Arc and Nozzle-Arc System: Mathematical-Model, Solution-Methodology and Validation

    NASA Astrophysics Data System (ADS)

    Pawar, Sumedh; Sharma, Atul

    2018-01-01

    This work presents mathematical model and solution methodology for a multiphysics engineering problem on arc formation during welding and inside a nozzle. A general-purpose commercial CFD solver ANSYS FLUENT 13.0.0 is used in this work. Arc formation involves strongly coupled gas dynamics and electro-dynamics, simulated by solution of coupled Navier-Stoke equations, Maxwell's equations and radiation heat-transfer equation. Validation of the present numerical methodology is demonstrated with an excellent agreement with the published results. The developed mathematical model and the user defined functions (UDFs) are independent of the geometry and are applicable to any system that involves arc-formation, in 2D axisymmetric coordinates system. The high-pressure flow of SF6 gas in the nozzle-arc system resembles arc chamber of SF6 gas circuit breaker; thus, this methodology can be extended to simulate arcing phenomenon during current interruption.

  17. Arc segmentation and seismicity in the Solomon Islands arc, SW Pacific

    NASA Astrophysics Data System (ADS)

    Chen, Ming-Chu; Frohlich, Cliff; Taylor, Frederick W.; Burr, George; van Ufford, Andrew Quarles

    2011-07-01

    This paper evaluates neotectonic segmentation in the Solomon Islands forearc, and considers how it relates to regional tectonic evolution and the extent of ruptures of large megathrust earthquakes. We first consider regional geomorphology and Quaternary vertical displacements, especially uplifted coral reef terraces. Then we consider geographic seismicity patterns, aftershock areas and vertical displacements for large earthquakes, focal mechanisms, and along-arc variations in seismic moment release to evaluate the relationship between neotectonically defined segments and seismicity. Notably, one major limitation of using seismicity to evaluate arc segmentation is the matter of accurately defining earthquake rupture zones. For example, shoreline uplifts associated with the 1 April 2007 M w 8.1 Western Solomons earthquake indicate that the along-arc extent of rupture was about 50 km smaller than the aftershock area. Thus if we had relied on aftershocks alone to identify the 2007 rupture zone, as we do for most historical earthquakes, we would have missed the rupture's relationship to a major morphologic feature. In many cases, the imprecision of defining rupture zones without surface deformation data may be largely responsible for the poor mismatches to neotectonic boundaries. However, when a precise paleoseismic vertical deformation history is absent, aftershocks are often the best available tool for inferring rupture geometries. Altogether we identify 16 segments in the Solomon Islands. These comprise three major tectonic regimes or supersegments that correspond respectively to the forearc areas of Guadalcanal-Makira, the New Georgia island group, and Bougainville Islands. Subduction of the young and relatively shallow and buoyant Woodlark Basin and spreading system distinguishes the central New Georgia supersegment from the two neighboring supersegments. The physiographic expression of the San Cristobal trench is largely absent, but bathymetric mapping of the

  18. Paleomagnetic results from the Early Cretaceous Lakang Formation lavas: Constraints on the paleolatitude of the Tethyan Himalaya and the India-Asia collision

    NASA Astrophysics Data System (ADS)

    Yang, Tianshui; Ma, Yiming; Bian, Weiwei; Jin, Jingjie; Zhang, Shihong; Wu, Huaichun; Li, Haiyan; Yang, Zhenyu; Ding, Jikai

    2015-10-01

    (Asia) at 54.9 ± 2.3 Ma and a final continent-continent collision of the Indian craton with the Tethyan Himalaya at 40.0 ± 3.3 Ma.

  19. Colon pouch (Mainz III) for continent urinary diversion.

    PubMed

    Stolzenburg, Jens-Uwe; Schwalenberg, Thilo; Liatsikos, Evangelos N; Sakelaropoulos, George; Rödder, Kilian; Hohenfellner, Rudolph; Fisch, Margit

    2007-06-01

    To evaluate the use of a continent cutaneous pouch made exclusively of colon (Mainz pouch III), as excellent results with the Mainz pouch III in irradiated patients suggested that the indication for this type of urinary diversion could be extended. The outcome of 24 patients with continent cutaneous urinary diversions using colon segments (Mainz pouch III) was investigated retrospectively. Overall, 22 of the patients had a malignant disease and two a benign disease; 16 had a hysterectomy and pelvic exenteration for gynaecological tumours; two men with a rhabdomyosarcoma of the prostate had a radical cystoprostatectomy; one woman had pelvic exenteration for bladder cancer; one man had a simultaneous rectum resection due to infiltrating rectal cancer, and another a left nephrectomy with cystectomy for concomitant kidney and bladder tumour. Benign indications were hyper-reflexive bladder after polytrauma and two cases of neurogenic bladder dysfunction. Eighteen patients had radiotherapy (32-48 Gy) before the urinary diversion. The mean (range) follow-up was 35 (12-65) months. The mean pouch capacity was 293.8 mL. Three patients died during the follow-up (two from disease progression and one suicide); 20 patients were fully continent, four with reduced pouch capacity (<300 mL) had slight incontinence and are wearing a protective pad (band-aid at the umbilicus). All patients use intermittent self-catheterization (mean catheterization frequency 6.8/day, range 6-12). Complications related to the pouch were one outlet stenosis that required revision. Postoperative pouchograms showed asymptomatic reflux in four patients. None of the patients developed metabolic acidosis or diarrhoea. The Mainz pouch III is an alternative to other types of continent urinary diversion.

  20. Reconstructing in space and time the closure of the middle and western segments of the Bangong-Nujiang Tethyan Ocean in the Tibetan Plateau

    NASA Astrophysics Data System (ADS)

    Fan, Jian-Jun; Li, Cai; Wang, Ming; Xie, Chao-Ming

    2018-01-01

    When and how the Bangong-Nujiang Tethyan Ocean closed is a highly controversial subject. In this paper, we present a detailed study and review of the Cretaceous ophiolites, ocean islands, and flysch deposits in the middle and western segments of the Bangong-Nujiang suture zone (BNSZ), and the Cretaceous volcanic rocks, late Mesozoic sediments, and unconformities within the BNSZ and surrounding areas. Our aim was to reconstruct the spatial-temporal patterns of the closing of the middle and western segments of the Bangong-Nujiang Tethyan Ocean. Our conclusion is that the closure of the ocean started during the Late Jurassic and was mainly complete by the end of the Early Cretaceous. The closure of the ocean involved both "longitudinal diachronous closure" from north to south and "transverse diachronous closure" from east to west. The spatial-temporal patterns of the closure process can be summarized as follows: the development of the Bangong-Nujiang Tethyan oceanic lithosphere and its subduction started before the Late Jurassic; after the Late Jurassic, the ocean began to close because of the compressional regime surrounding the BNSZ; along the northern margin of the Bangong-Nujiang Tethyan Ocean, collisions involving the arcs, back-arc basins, and marginal basins of a multi-arc basin system first took place during the Late Jurassic-early Early Cretaceous, resulting in regional uplift and the regional unconformity along the northern margin of the ocean and in the Southern Qiangtang Terrane on the northern side of the ocean. However, the closure of the Bangong-Nujiang Tethyan Ocean cannot be attributed to these arc-arc and arc-continent collisions, because subduction and the development of the Bangong-Nujiang Tethyan oceanic lithosphere continued until the late Early Cretaceous. The gradual closure of the middle and western segments of Bangong-Nujiang Tethyan Ocean was diachronous from east to west, starting in the east in the middle Early Cretaceous, and being mainly

  1. Opportunity, Choice, and Burglary Victimization in Taiwan.

    PubMed

    Kuo, Shih-Ya

    2015-07-01

    This study examined burglary victimization in Taiwan with an application of the structure-choice model that included four theoretical dimensions: proximity to crime, exposure to crime, target attractiveness, and guardianship. Drawing on the 2000 Taiwan Areas Criminal Victimization Survey, the results of the current study showed a moderate effect of the opportunity model on Taiwan's burglary victimization. Also, this study found both consistent and conflicting findings in the current data. The null effect of motorcycles (including scooters) that represented the concept of target attractiveness in relation to burglary risk reflected a difference in population density and transportation needs between Taiwan and the West. Clearly, the role of social context needs to be understood when studies apply a Western model to a non-Western context. © The Author(s) 2014.

  2. Seismicity of the Earth 1900–2010 Australia plate and vicinity

    USGS Publications Warehouse

    Benz, Harley M.; Herman, Matthew; Tarr, Arthur C.; Hayes, Gavin P.; Furlong, Kevin P.; Villaseñor, Antonio; Dart, Richard L.; Rhea, Susan

    2011-01-01

    This map shows details of the Australia plate and vicinity not presented in Tarr and others (2010). The boundary of the Australia plate includes all fundamental plate boundary components: mid-ocean ridges, subduction zones, arc-continent collisions, and large-offset transform faults. Along the southern edge of the plate the mid-ocean ridge separates the Australia and Antarctica plates and its behavior is straightforward. In contrast, the other boundary segments that ring the Australia plate represent some of the most seismically active elements of the global plate boundary system, and some of the most rapidly evolving plate interactions. As a result, there are some very complex structures which host many large and great earthquakes

  3. Do nurses promote urinary continence in hospitalized older people?: An exploratory study.

    PubMed

    Dingwall, Lindsay; McLafferty, Ella

    2006-10-01

    The aim of this paper is to explore whether nurses working in elderly medicine and in acute medical settings promote urinary continence in older people or in reality use containment strategies. Untreated urinary incontinence in older adults can result in prolonged hospital admission and increased risk of admission to long-term care. Urinary incontinence can also have severe psychosocial effects on older people. Most studies relating to this topic have relied on quantitative approaches to data collection with a seeming lack of qualitative investigation into how nursing staff promote urinary continence in hospitalized older people. Focus groups and one-to-one semi-structured interviews were carried out in two NHS regions in Scotland. Registered and non-Registered Nurses were invited to participate. Five focus groups (n = 17) and four single interviews (n = 4) were conducted. Data generated were analysed thematically using QSR N-VIVO 2. Some nurses believe that older people accept urinary incontinence as a consequence of ageing. Lack of assessment results in older people being labelled as incontinent of urine. Assessment strategies in medicine for the elderly tend to focus on product identification and management of incontinence. Although nurses from all clinical areas identify the importance of promoting continence, the problem continues to be contained rather than treated. Conflicting clinical priorities, varying staff approaches to urinary continence and deficits in education are cited among the barriers to promoting continence. The results suggest that nurses continue to contain urinary incontinence rather than promoting continence in older people. Nursing staff need to be aware of the impact of untreated urinary incontinence on older people. Practitioners should promote continence rather than employing containment strategies. A validated assessment tool for older people needs to be developed. Views of older people should be sought regarding their attitudes

  4. Episodic construction of the Tatra granitoid intrusion (Central Western Carpathians, Poland/Slovakia): consequences for the geodynamics of Variscan collision and Rheic Ocean closure

    NASA Astrophysics Data System (ADS)

    Gawęda, Aleksandra; Burda, Jolanta; Klötzli, Urs; Golonka, Jan; Szopa, Krzysztof

    2016-06-01

    The Tatra granitoid pluton (Central Western Carpathians, Poland/Slovakia) is an example of composite polygenetic intrusion, comprising many magmatic pulses varying compositionally from diorite to granite. The U-Pb LA-MC-ICP-MS zircon dating of successive magma batches indicates the presence of magmatic episodes at 370-368, 365, 360, 355 and 350-340 Ma, all together covering a time span of 30 Ma of magmatic activity. The partial resorption and recycling of former granitoid material ("petrological cannibalism") was a result of the incremental growth of the pluton and temperature in the range of 750-850 °C. The long-lasting granitoid magmatism was connected to the prolonged subduction of oceanic crust and collision of the Proto-Carpathian Terrane with a volcanic arc and finally with Laurussia, closing the Rheic Ocean. The differences in granitoid composition are the results of different depths of crustal melting. More felsic magmas were generated in the outer zone of the volcanic arc, whilst more mafic magmas were formed in the inner part of the supra-subduction zone. The source rocks of the granitoid magmas covered the compositional range of metapelite-amphibolite and were from both lower and upper crust. The presence of the inherited zircon cores suggests that the collision and granitoid magmatism involved crust of Cadomian consolidation age (c. 530 and 518 Ma) forming the Proto-Carpathian Terrane, crust of Avalonian affinity (462, 426 Ma) and melted metasedimentary rocks of volcanic arc provenance.

  5. X-ray Arcs Tell The Tale Of Giant Eruption

    NASA Astrophysics Data System (ADS)

    2002-08-01

    outburst is consistent with other optical and infrared observations that indicate that the rate of star formation in the galaxy increased dramatically at about that time. Centaurus A Arcs Centaurus A X-ray Image Other authors have suggested that the merger of a small spiral galaxy with Centaurus A about a hundred million years ago triggered the high-energy jets and the ongoing violent activity in the nucleus of the galaxy. The tremendous energy released when a galaxy is "turned on" by a collision can have a profound influence on the subsequent evolution of the galaxy and its neighbors. The mass of the central black hole can increase, the gas reservoir for the next generation of stars can be expelled, and the space between the galaxies can be enriched with heavier elements. "Active galaxies could have played a significant role in the evolution of galaxies in the early universe when collisions between galaxies were much more frequent," said Giuseppina Fabbiano, a coauthor on the paper. "Centaurus A, at a distance of only 11 million light years, gives us a rare opportunity to study such an active galaxy in action." Chandra observed Centaurus A with its High Resolution Camera instrument on September 10, 1999, for approximately 4.7 hours. Other members of CfA research team include Martin Elvis, Ralph Kraft, Stephen Murray, and Fabrizio Nicastro The HRC was built by the Smithsonian Astrophysical Observatory in Cambridge, Mass. NASA's Marshall Space Flight Center, Huntsville, AL, manages the Chandra program for the Office of Space Science, Washington, DC. TRW, Inc., Redondo Beach, California, is the prime contractor for the spacecraft. The Smithsonian's Chandra X-ray Center controls science and flight operations from Cambridge, MA.

  6. The odyssey of the Cache Creek terrane, Canadian Cordillera: Implications for accretionary orogens, tectonic setting of Panthalassa, the Pacific superwell, and break-up of Pangea

    NASA Astrophysics Data System (ADS)

    Johnston, S. T.; Borel, G. D.

    2007-01-01

    The Cache Creek terrane (CCT) of the Canadian Cordillera consists of accreted seamounts that originated adjacent to the Tethys Ocean in the Permian. We utilize Potential Translation Path plots to place quantitative constraints on the location of the CCT seamounts through time, including limiting the regions within which accretion events occurred. We assume a starting point for the CCT seamounts in the easternmost Tethys at 280 Ma. Using reasonable translation rates (11 cm/a), accretion to the Stikinia-Quesnellia oceanic arc, which occurred at about 230 Ma, took place in western Panthalassa, consistent with the mixed Tethyan fauna of the arc. Subsequent collision with a continental terrane, which occurred at about 180 Ma, took place in central Panthalassa, > 4000 km west of North America yielding a composite ribbon continent. Westward subduction of oceanic lithosphere continuous with the North American continent from 180 to 150 Ma facilitated docking of the ribbon continent with the North American plate. The paleogeographic constraints provided by the CCT indicate that much of the Canadian Cordilleran accretionary orogen is exotic. The accreting crustal block, a composite ribbon continent, grew through repeated collisional events within Panthalassa prior to docking with the North American plate. CCT's odyssey requires the presence of subduction zones within Panthalassa and indicates that the tectonic setting of the Panthalassa superocean differed substantially from the current Pacific basin, with its central spreading ridge and marginal outward dipping subduction zones. A substantial volume of oceanic lithosphere was subducted during CCT's transit of Panthalassa. Blanketing of the core by these cold oceanic slabs enhanced heat transfer out of the core into the lowermost mantle, and may have been responsible for the Cretaceous Normal Superchron, the coeval Pacific-centred mid-Cretaceous superplume event, and its lingering progeny, the Pacific Superswell. Far field

  7. The geochemistry and petrogenesis of the Paleoproterozoic Green Mountain arc: A composite(?), bimodal, oceanic, fringing arc

    USGS Publications Warehouse

    Jones, D.S.; Barnes, C.G.; Premo, W.R.; Snoke, A.W.

    2011-01-01

    The inferred subduction affinity of the ~1780-Ma Green Mountain arc, a dominantly bimodal igneous terrane (together with immature marine and volcaniclastic sedimentary rocks) accreted to the southern margin of the Wyoming province, is integral to arc-accretion models of the Paleoproterozoic growth of southern Laurentia. Conversely, the dominantly bimodal nature of many putative arc-related igneous suites throughout southern Laurentia, including the Green Mountain arc, has also been used to support models of growth by extension of pre-existing crust. We report new geochemical and isotopic data from ~1780-Ma gabbroic and granodioritic to tonalitic rocks of the Big Creek Gneiss, interpreted as consanguineous with previously studied metavolcanic rocks of the Green Mountain Formation.The ~1780-Ma Big Creek Gneiss mafic rocks show clear geochemical signatures of a subduction origin and provide no supporting evidence for extensional tectonism. The ~1780-Ma Big Creek Gneiss felsic rocks are attributed to partial melting of mafic and/or mixed lower-crustal material. The bimodal nature of the suite results from the combination of arc basalts and felsic crustal melts. The lack of andesite is consistent with the observed tholeiitic differentiation trend of the mafic magmas. The lower e{open}Nd(1780Ma) values for the felsic rocks vs. the mafic rocks suggest that the unexposed lower crust of the arc may be older than the arc and that Trans-Hudson- or Penokean-aged rocks possibly form the substratum of the arc. Our results reinforce previous interpretations that arc-related magmatism played a key role in the Paleoproterozoic crustal growth of southern Laurentia, but also support the possibility of unexposed older crust as basement to the arcs. ?? 2011 Elsevier B.V.

  8. Preoperative predictive model of recovery of urinary continence after radical prostatectomy.

    PubMed

    Matsushita, Kazuhito; Kent, Matthew T; Vickers, Andrew J; von Bodman, Christian; Bernstein, Melanie; Touijer, Karim A; Coleman, Jonathan A; Laudone, Vincent T; Scardino, Peter T; Eastham, James A; Akin, Oguz; Sandhu, Jaspreet S

    2015-10-01

    To build a predictive model of urinary continence recovery after radical prostatectomy (RP) that incorporates magnetic resonance imaging (MRI) parameters and clinical data. We conducted a retrospective review of data from 2,849 patients who underwent pelvic staging MRI before RP from November 2001 to June 2010. We used logistic regression to evaluate the association between each MRI variable and continence at 6 or 12 months, adjusting for age, body mass index (BMI) and American Society of Anesthesiologists (ASA) score, and then used multivariable logistic regression to create our model. A nomogram was constructed using the multivariable logistic regression models. In all, 68% (1,742/2,559) and 82% (2,205/2,689) regained function at 6 and 12 months, respectively. In the base model, age, BMI and ASA score were significant predictors of continence at 6 or 12 months on univariate analysis (P < 0.005). Among the preoperative MRI measurements, membranous urethral length, which showed great significance, was incorporated into the base model to create the full model. For continence recovery at 6 months, the addition of membranous urethral length increased the area under the curve (AUC) to 0.664 for the validation set, an increase of 0.064 over the base model. For continence recovery at 12 months, the AUC was 0.674, an increase of 0.085 over the base model. Using our model, the likelihood of continence recovery increases with membranous urethral length and decreases with age, BMI and ASA score. This model could be used for patient counselling and for the identification of patients at high risk for urinary incontinence in whom to study changes in operative technique that improve urinary function after RP. © 2015 The Authors BJU International © 2015 BJU International Published by John Wiley & Sons Ltd.

  9. Slab detachment during continental collision: Influence of crustal rheology and interaction with lithospheric delamination

    NASA Astrophysics Data System (ADS)

    Duretz, T.; Gerya, T. V.

    2013-08-01

    Collision between continents can lead to the subduction of continental material. If the crust remains coupled to the downgoing slab, a large buoyancy force is generated. This force slows down convergence and promotes slab detachment. If the crust resists to subduction, it may decouple from the downgoing slab and be subjected to buoyant extrusion. We employ two-dimensional thermo-mechanical modelling to study the importance of crustal rheology on the evolution of subduction-collision systems. We propose simple quantifications of the mechanical decoupling between lithospheric levels (σ*) and the potential for buoyant extrusion of the crust (ξ*). The modelling results indicate that a variable crustal rheological structure results in slab detachment, delamination, or the combination of both mechanisms. A strong crust provides coupling at the Moho (low σ*) and remains coherent during subduction (low ξ). It promotes deep subduction of the crust (180 km) and slab detachment. Exhumation occurs in coherent manners via eduction and thrusting. Slab detachment triggers the development of topography (> 4.5 km) close to the suture. A contrasting style of collision occurs using a weak crustal rheology. Mechanical decoupling at the Moho (high σ*) promotes the extrusion of the crust (high ξ), disabling slab detachment. Ongoing shortening leads to buckling of the crust and development of topography on the lower plate. Collisions involving rheologically layered crust allow decoupling at mid-crustal depths. This structure favours both the extrusion of upper crust and the subduction of the lower crust. Such collisions are successively affected by delamination and slab detachment. Topography develops together with the buoyant extrusion of crust onto the foreland and is further amplified by slab detachment. Our results suggest that the occurrence of both delamination (Apennines) and slab detachment (Himalayas) in orogens may indicate differences in the initial crustal structure of

  10. Filtered cathodic arc source

    DOEpatents

    Falabella, Steven; Sanders, David M.

    1994-01-01

    A continuous, cathodic arc ion source coupled to a macro-particle filter capable of separation or elimination of macro-particles from the ion flux produced by cathodic arc discharge. The ion source employs an axial magnetic field on a cathode (target) having tapered sides to confine the arc, thereby providing high target material utilization. A bent magnetic field is used to guide the metal ions from the target to the part to be coated. The macro-particle filter consists of two straight solenoids, end to end, but placed at 45.degree. to one another, which prevents line-of-sight from the arc spot on the target to the parts to be coated, yet provides a path for ions and electrons to flow, and includes a series of baffles for trapping the macro-particles.

  11. About the ARC

    Science.gov Websites

    -disciplinary problems that are relevant to both the Army and industry. The Scope of ARC The ARC focuses on the vehicles and vehicle systems. Platforms may have conventional or hybrid powertrains; be manned, tele of vehicles. The research focus ranges from component level to system-of-systems level, from the

  12. Impact of posterior rhabdosphincter reconstruction during robot-assisted radical prostatectomy: retrospective analysis of time to continence.

    PubMed

    Woo, Jason R; Shikanov, Sergey; Zorn, Kevin C; Shalhav, Arieh L; Zagaja, Gregory P

    2009-12-01

    Posterior rhabdosphincter (PR) reconstruction during robot-assisted radical prostatectomy (RARP) was introduced in an attempt to improve postoperative continence. In the present study, we evaluate time to achieve continence in patients who are undergoing RARP with and without PR reconstruction. A prospective RARP database was searched for most recent cases that were accomplished with PR reconstruction (group 1, n = 69) or with standard technique (group 2, n = 63). We performed the analysis applying two definitions of continence: 0 pads per day or 0-1 security pad per day. Patients were evaluated by telephone interview. Statistical analysis was carried out using the Kaplan-Meier method and log-rank test. With PR reconstruction, continence was improved when defined as 0-1 security pad per day (median time of 90 vs 150 days; P = 0.01). This difference did not achieve statistical significance when continence was defined as 0 pads per day (P = 0.12). A statistically significant improvement in continence rate and time to achieve continence is seen in patients who are undergoing PR reconstruction during RARP, with continence defined as 0-1 security/safety pad per day. A larger, prospective and randomized study is needed to better understand the impact of this technique on postoperative continence.

  13. Continence outcomes in patients undergoing robotic assisted laparoscopic mitrofanoff appendicovesicostomy.

    PubMed

    Wille, Mark A; Zagaja, Gregory P; Shalhav, Arieh L; Gundeti, Mohan S

    2011-04-01

    Continent catheterizable channels for emptying the bladder are typically performed via an open surgical approach. We present our surgical approach and initial outcomes with specific attention to continence for robotic assisted laparoscopic Mitrofanoff appendicovesicostomy formation. Between February 2008 and April 2010, 13 patients were considered for robotic assisted laparoscopic Mitrofanoff appendicovesicostomy and 11 underwent the procedure (2 open conversions). Five patients underwent enterocystoplasty with appendicovesicostomy and 6 underwent isolated appendicovesicostomy. The appendicovesicostomy anastomosis was performed on the anterior (without augmentation) or posterior (with augmentation) bladder wall and the stoma was brought to the umbilical site or right lower quadrant. Detrusor backing (4 cm) was ensured except in 1 patient (number 5). Mean patient age at surgery was 10.4 years (range 5 to 14). Mean estimated blood loss was 61.8 cc. Mean operative time for isolated appendicovesicostomy was 347 minutes and there were no intraoperative complications. Incontinence through the stoma developed in 1 patient with inadequate detrusor backing (less than 4 cm), which resolved with dextranomer/hyaluronic acid injection into the appendicovesicostomy anastomosis. This patient had resolution of incontinence with an increase in bladder capacity to 300 cc. Three patients required skin flap revision for cutaneous scarring. To date all patients are catheterizing without difficulty and are continent. Median followup was 20 months (range 3 to 29). We are encouraged by our preliminary experience with the robotic assisted laparoscopic Mitrofanoff appendicovesicostomy continent urinary diversion with or without ileocystoplasty. Early in the experience we emphasize the importance of 4 cm of detrusor backing to maintain stomal continence. Copyright © 2011 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

  14. Achieving zero waste of municipal incinerator fly ash by melting in electric arc furnaces while steelmaking.

    PubMed

    Yang, Gordon C C; Chuang, Tsun-Nan; Huang, Chien-Wen

    2017-04-01

    The main objective of this work was to promote zero waste of municipal incinerator fly ash (MIFA) by full-scale melting in electric arc furnaces (EAFs) of steel mini mills around the world. MIFA, generally, is considered as a hazardous waste. Like in many countries, MIFA in Taiwan is first solidified/stabilized and then landfilled. Due to the scarcity of landfill space, the cost of landfilling increases markedly year by year in Taiwan. This paper presents satisfactory results of treating several hundred tons of MIFA in a full-scale steel mini mill using the approach of "melting MIFA while EAF steelmaking", which is somewhat similar to "molten salt oxidation" process. It was found that this practice yielded many advantages such as (1) about 18wt% of quicklime requirement in EAF steelmaking can be substituted by the lime materials contained in MIFA; (2) MIFA would totally end up as a material in fractions of recyclable EAF dust, oxidized slag and reduced slag; (3) no waste is needed for landfilling; and (4) a capital cost saving through the employment of existing EAFs in steel mini mills instead of building new melting plants for the treatment of MIFA. Thus, it is technically feasible to achieve zero waste of MIFA by the practice of this innovative melting technology. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Adding high time resolution to charge-state-specific ion energy measurements for pulsed copper vacuum arc plasmas

    NASA Astrophysics Data System (ADS)

    Tanaka, Koichi; Han, Liang; Zhou, Xue; Anders, André

    2015-08-01

    Charge-state-resolved ion energy-time distributions of pulsed Cu arc plasma were obtained by using direct (time-dependent) acquisition of the ion detection signal from a commercial ion mass-per-charge and energy-per-charge analyzer. We find a shift of energies of Cu2+, Cu3+ and Cu4+ ions to lower values during the first few hundred microseconds after arc ignition, which is evidence for particle collisions in the plasma. The generation of Cu+ ions in the later part of the pulse, measured by the increase of Cu+ signal intensity and an associated slight reduction of the mean charge state, points to charge exchange reactions between ions and neutrals. At the very beginning of the pulse, when the plasma expands into vacuum and the plasma potential strongly fluctuates, ions with much higher energy (over 200 eV) are observed. Early in the pulse, the ion energies observed are approximately proportional to the ion charge state, and we conclude that the acceleration mechanism is primarily based on acceleration in an electric field. This field is directed away from the cathode, indicative of a potential hump. Measurements by a floating probe suggest that potential structures travel, and ions moving in the traveling field can gain high energies up to a few hundred electron-volts. Later in the pulse, the approximate proportionality is lost, which is related to increased smearing out of different energies due to collisions with neutrals, and/or to a change of the acceleration character from electrostatic to ‘gas-dynamic’, i.e. dominated by pressure gradient.

  16. The urethral pressure profiles in continent and stress-incontinent women.

    PubMed

    Henriksson, L; Andersson, K E; Ulmsten, U

    1979-01-01

    Simultaneous urethrocystometry, including recording of the urethral pressure profile, was performed in 127 women aged 30 to 69 years; 42 of the women were free from urologic disorders and 85 had stress incontinence of urine. Both groups were subgrouped according to age. The results in the continent and the incontinent women were analyzed separately, in order to disclose any age-related changes. The data within each decade of age were also comparatively analyzed. In the bladder pressure at rest no age-related changes were found, and the readings were similar in the continent and the incontinent women. The maximum urethral pressure fell significantly with rising age in both groups and was significantly reduced in stress incontinence. The urethral closure pressure showed variations similar to those in the maximum urethral pressure. No lower limit of urethral closure pressure that definitely predisposed to stress incontinence could be established. The functional length of the urethra diminished significantly with rising age in the continent, but not in the incontinent women. The absolute length of the urethra did not show such diminution. Both the functional and the absolute urethral length were significantly less in the incontinent than in the continent women in the age groups between 30 and 49 years.

  17. Quarantine for SARS, Taiwan

    PubMed Central

    King, Chwan-Chuan; Chen, Cathy W. S.; Ho, Mei-Shang; Lee, Jen-Yu; Liu, Feng-Chi; Wu, Yi-Chun

    2005-01-01

    During the 2003 outbreak of severe acute respiratory syndrome (SARS) in Taiwan, >150,000 persons were quarantined, 24 of whom were later found to have laboratory-confirmed SARS-coronavirus (SARS-CoV) infection. Since no evidence exists that SARS-CoV is infective before the onset of symptoms and the quarantined persons were exposed but not symptomatic, we thought the quarantine's effectiveness should be investigated. Using the Taiwan quarantine data, we found that the onset-to-diagnosis time of previously quarantined confirmed case-patients was significantly shortened compared to that for those who had not been quarantined. Thus, quarantine for SARS in Taiwan screened potentially infective persons for swift diagnosis and hospitalization after onset, thereby indirectly reducing infections. Full-scale quarantine measures implemented on April 28 led to a significant improvement in onset-to-diagnosis time of all SARS patients, regardless of previous quarantine status. We discuss the temporal effects of quarantine measures and other interventions on detection and isolation as well as the potential usefulness of quarantine in faster identification of persons with SARS and in improving isolation measures. PMID:15752447

  18. Numerical investigation of the double-arcing phenomenon in a cutting arc torch

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mancinelli, B. R., E-mail: bmancinelli@frvt.utn.edu.ar; Minotti, F. O.; Kelly, H.

    2014-07-14

    A numerical investigation of the double-arcing phenomenon in a cutting arc torch is reported. The dynamics of the double-arcing were simulated by using a two-dimensional model of the gas breakdown development in the space-charge layer contiguous to the nozzle of a cutting arc torch operated with oxygen. The kinetic scheme includes ionization of heavy particles by electron impact, electron attachment, electron detachment, electron–ion recombination, and ion–ion recombination. Complementary measurements during double-arcing phenomena were also conducted. A marked rise of the nozzle voltage was found. The numerical results showed that the dynamics of a cathode spot at the exit of themore » nozzle inner surface play a key role in the raising of the nozzle voltage, which in turn allows more electrons to return to the wall at the nozzle inlet. The return flow of electrons thus closes the current loop of the double-arcing. The increase in the (floating) nozzle voltage is due to the fact that the increased electron emission at the spot is mainly compensated by the displacement current (the ions do not play a relevant role due to its low-mobility) until that the stationary state is achieved and the electron return flow fully-compensates the electron emission at the spot. A fairly good agreement was found between the model and the experiment for a spot emission current growth rate of the order of 7 × 10{sup 4} A/s.« less

  19. Boundary Layer Transition Protuberance Tests at NASA JSC Arc-Jet Facility

    NASA Technical Reports Server (NTRS)

    Larin, M. E.; Marichalar, J. J.; Kinder, G. R.; Campbell, C. H.; Riccio, J. R.; Nquyen, T. Q.; DelPapa, S. V.; Pulsonetti, M. V.

    2009-01-01

    overview of the channel nozzle arc jet, test articles and test conditions, as well as the results of the arc-jet tests including the measured temperature response of the test articles, their pre- and post-test surface scans, condition of the thermal paint, and continents on the protrusion tip heating achieved in tests compared to the computational fluid dynamics predictions.

  20. Taiwan's underwater cultural heritage documentation management

    NASA Astrophysics Data System (ADS)

    Tung, Y.-Y.

    2015-09-01

    Taiwan is an important trading and maritime channels for many countries since ancient time. Numerous relics lie underwater due to weather, wars, and other factors. In the year of 2006, Bureau of Cultural Heritage (BOCH) entrusted the Underwater Archaeological Team of Academia Sinica to execute the underwater archaeological investigation projects. Currently, we verified 78 underwater targets, with 78 site of those had been recognized as shipwrecks sites. Up to date, there is a collection of 638 underwater objects from different underwater archaeological sites. Those artefacts are distributed to different institutions and museums. As very diverse management methods/systems are applied for every individual institution, underwater cultural heritage data such as survey, excavation report, research, etc. are poorly organized and disseminated for use. For better communication regarding to Taiwan's underwater cultural heritage in every level, a universal format of documentation should be established. By comparing the existing checklist used in Taiwan with guidelines that are followed in other countries, a more intact and appropriate underwater cultural heritage condition documentation system can be established and adapted in Taiwan.

  1. Faint Ring, Bright Arc

    NASA Image and Video Library

    2010-01-12

    In this image taken by NASA Cassini spacecraft, the bright arc in Saturn faint G ring contains a little something special. Although it cant be seen here, the tiny moonlet Aegaeon orbits within the bright arc.

  2. Late Cretaceous-Cenozoic subduction-collision history of the Southern Neotethys: new evidence from the Çağlayancerit area, SE Turkey

    NASA Astrophysics Data System (ADS)

    Akıncı, Ahmet Can; Robertson, Alastair H. F.; Ünlügenç, Ulvi Can

    2016-01-01

    Evidence of the subduction-collision history of the S Neotethys is well exposed in the frontal part of the SE Anatolian thrust belt and the adjacent Arabian continental margin. The foreland succession in the study area begins with Eocene shelf carbonates, ranging from shallow marine to deeper marine, without sedimentary input from the Tauride continent to the north. After a regional hiatus (Oligocene), sedimentation resumed during the Early Miocene with terrigenous gravity-flow deposition in the north (Lice Formation) and shallow-marine carbonates further south. Clastic detritus was derived from the Tauride continent and oceanic accretionary material. The base of the overriding Tauride allochthon comprises ophiolite-derived debris flows, ophiolite-related mélange and dismembered ophiolitic rocks. Above this, the regional-scale Bulgurkaya sedimentary mélange (an olistostrome) includes blocks and dismembered thrust sheets of metamorphic rocks, limestone and sandstone, which include Late Cretaceous and Eocene foraminifera. The matrix is mainly strongly deformed Eocene-Oligocene mudrocks, hemipelagic marl and sandstone turbidites. The thrust stack is topped by a regionally extensive thrust sheet (Malatya metamorphic unit), which includes greenschist facies marble, calcschist, schist and phyllite, representing Tauride continental crust. Beginning during the Late Mesozoic, the S Neotethys subducted northwards beneath a backstop represented by the Tauride microcontinent (Malatya metamorphic unit). Ophiolites formed within the S Neotethys and accreted to the Tauride active margin. Large-scale sedimentary mélange developed along the Tauride active margin during Eocene-Oligocene. On the Arabian margin, a sedimentary hiatus and tilting (Oligocene) is interpreted to record initial continental collision. The Early Miocene terrigenous gravity flows represent a collision-related flexural foreland basin. Southward overthrusting of the Tauride allochthon took place during Early

  3. The arc arises: The links between volcanic output, arc evolution and melt composition

    NASA Astrophysics Data System (ADS)

    Brandl, Philipp A.; Hamada, Morihisa; Arculus, Richard J.; Johnson, Kyle; Marsaglia, Kathleen M.; Savov, Ivan P.; Ishizuka, Osamu; Li, He

    2017-03-01

    Subduction initiation is a key process for global plate tectonics. Individual lithologies developed during subduction initiation and arc inception have been identified in the trench wall of the Izu-Bonin-Mariana (IBM) island arc but a continuous record of this process has not previously been described. Here, we present results from International Ocean Discovery Program Expedition 351 that drilled a single site west of the Kyushu-Palau Ridge (KPR), a chain of extinct stratovolcanoes that represents the proto-IBM island arc, active for ∼25 Ma following subduction initiation. Site U1438 recovered 150 m of oceanic igneous basement and ∼1450 m of overlying sediments. The lower 1300 m of these sediments comprise volcaniclastic gravity-flow deposits shed from the evolving KPR arc front. We separated fresh magmatic minerals from Site U1438 sediments, and analyzed 304 glass (formerly melt) inclusions, hosted by clinopyroxene and plagioclase. Compositions of glass inclusions preserve a temporal magmatic record of the juvenile island arc, complementary to the predominant mid-Miocene to recent activity determined from tephra layers recovered by drilling in the IBM forearc. The glass inclusions record the progressive transition of melt compositions dominated by an early 'calc-alkalic', high-Mg andesitic stage to a younger tholeiitic stage over a time period of 11 Ma. High-precision trace element analytical data record a simultaneously increasing influence of a deep subduction component (e.g., increase in Th vs. Nb, light rare earth element enrichment) and a more fertile mantle source (reflected in increased high field strength element abundances). This compositional change is accompanied by increased deposition rates of volcaniclastic sediments reflecting magmatic output and maturity of the arc. We conclude the 'calc-alkalic' stage of arc evolution may endure as long as mantle wedge sources are not mostly advected away from the zones of arc magma generation, or the rate of

  4. Overactive bladder is a negative predictor of achieving continence after robot-assisted radical prostatectomy.

    PubMed

    Yamada, Yuta; Fujimura, Tetsuya; Fukuhara, Hiroshi; Sugihara, Toru; Miyazaki, Hideyo; Nakagawa, Tohru; Kume, Haruki; Igawa, Yasuhiko; Homma, Yukio

    2017-10-01

    To investigate predictors of continence outcomes after robot-assisted radical prostatectomy. Clinical records of 272 patients who underwent robot-assisted radical prostatectomy were investigated. Preoperative Overactive Bladder Symptom Score, International Prostate Symptom Score and clinicopathological factors were investigated, and relationships between factors and recovery of continence after robot-assisted radical prostatectomy were assessed. The presence of overactive bladder was defined as having urgency for more than once a week and having ≥3 points according to the Overactive Bladder Symptom Score. Age (≤66 years) was significantly associated with continence within 6 months after robot-assisted radical prostatectomy (P = 0.033). The absence of overactive bladder and lower Overactive Bladder Symptom Score (<3) were significantly associated with recovery of continence within 12 months after surgery (both variables P = 0.009). In terms of achieving recovery of continence after robot-assisted radical prostatectomy, Kaplan-Meier curves showed earlier recovery in "age ≤66 years," "prostate weight ≤40 g" and "overactive bladder symptom score <3" (P = 0.0072, 0.0172 and 0.0140, respectively). Multivariate analysis showed that the presence of overactive bladder was an independent negative predictor for recovery of continence within 12 months after surgery (P = 0.019). The presence of baseline overactive bladder seems to represent an independent negative predictor for recovery of continence at 12 months after robot-assisted radical prostatectomy. © 2017 The Japanese Urological Association.

  5. Arcing on dc power systems

    NASA Technical Reports Server (NTRS)

    Moores, Greg; Heller, R. P.; Sutanto, Surja; Dugal-Whitehead, Norma R.

    1992-01-01

    Unexpected and undesirable arcing on dc power systems can produce hazardous situations aboard space flights. The potential for fire and shock might exist in a situation where there is a broken conductor, a loose power connection, or a break in the insulation of the power cable. Such arcing has been found to be reproducible in a laboratory environment. Arcing tests show that the phenomena can last for several seconds and yet be undetectable by present protection schemes used in classical power relaying and remote power controller applications. This paper characterizes the arcing phenomena and suggests future research that is needed.

  6. Tectonic-erosion coupling? The erosional response to India-Asia collision

    NASA Astrophysics Data System (ADS)

    Najman, Y.; Henderson, A.; Jenks, D.; Parrish, R.; Horstwood, M.; Foster, G. L.; Green, O.

    2009-04-01

    In order to use the detrital record as an archive of hinterland evolution, we need to understand the erosional response to tectonics. Collision of India and Asia at ca 50 Ma [1 and refs therein] resulted in the subsequent development of the Himalayan orogen. What was the erosional response to this event? Most basins into which Himalayan detritus may have been deposited have now been researched at least at reconnaissance level. The conclusion reached is that, as yet, there appears to be no evidence of substantial detritus eroded from the southern flanks of the rising Himalayan mountain belt prior to ~40 Ma, 10 My after collision. In the Indus suture zone basin, detritus is predominantly sourced from the Trans-Himalayan arc of the northern, Asian plate, rather than the Himalaya to the south [2, 3]. In the peripheral foreland basin, the oldest substantial Himalayan-derived detritus is dated at <40 Ma [4]. To the west, in the Katawaz remnant ocean basin and offshore Indus Fan, earliest Himalayan derived deposits are poorly dated, insubstantial, and/or predominantly derived from north of the suture zone rather than the rising Himalayan thrust belt to the south [5, 6]. In the east, earliest Himalayan-derived material is dated at 38 Ma in the Bengal remnant ocean basin [7], and "post-Paleocene" in the Bengal Fan [8 and refs therein]. Paleogene sediments of the Sunda Arc accretionary prism, originally thought to be offscraped Himalayan-derived Bengal Fan [9, 10] are now shown to be predominantly derived from the arc to the east [11, 12]. What could be reason for this ~10 My delay between collision and first documented products of erosion from the mountain belt? The delay has been explained by suggesting collision occurred considerably later than commonly believed [13]. However, this is at variance with provenance data which show that material of Asian origin was deposited on the Indian plate by 50 Ma [14, 15] A second possibility is that Palaeogene Himalayan

  7. Rear-arc vs. arc-front volcanoes in the Katmai reach of the Alaska Peninsula: A critical appraisal of across-arc compositional variation

    USGS Publications Warehouse

    Hildreth, W.; Fierstein, J.; Siems, D.F.; Budahn, J.R.; Ruiz, J.

    2004-01-01

    Physical and compositional data and K-Ar ages are reported for 14 rear-arc volcanoes that lic 11-22 km behind the narrowly linear volcanic front defined by the Mount Katmai-to-Devils Desk chain on the Alaska Peninsula. One is a 30-km3 stratocone (Mount Griggs; 51-63% SiO2) active intermittently from 292 ka to Holocene. The others are monogenetic cones, domes, lava flows, plugs, and maars, of which 12 were previously unnamed and unstudied; they include seven basalts (48-52% SiO2), four mafic andesites (53-55% SiO2), and three andesite-dacite units. Six erupted in the interval 500-88 ka, one historically in 1977, and five in the interval 3-2 Ma. No migration of the volcanic front is discernible since the late Miocene, so even the older units erupted well behind the front. Discussion explores the significance of the volcanic front and the processes that influence compositional overlaps and differences among mafic products of the rear-arc volcanoes and of the several arc-front edifices nearby. The latter have together erupted a magma volume of about 200 km3, at least four times that of all rear-arc products combined. Correlation of Sr-isotope ratios with indices of fractionation indicates crustal contributions in volcanic-front magmas (0.7033-0.7038), but lack of such trends among the rear-arc units (0.70298-0.70356) suggests weaker and less systematic crustal influence. Slab contributions and mantle partial-melt fractions both appear to decline behind the front, but neither trend is crisp and unambiguous. No intraplate mantle contribution is recognized nor is any systematic across-arc difference in intrinsic mantle-wedge source fertility discerned. Both rear-arc and arc-front basalts apparently issued from fluxing of typically fertile NMORB-source mantle beneath the Peninsular terrane, which docked here in the Mesozoic. ?? Springer-Verlag 2004.

  8. Hydrocarbons in New Guinea, controlled by basement fabric, Mesozoic extension and Tertiary convergent margin tectonics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hill, K.C.; Kendrick, R.D.; Crowhurst, P.V.

    1996-01-01

    Most models for the tectonic evolution of New Guinea involve Early and Late Miocene arc-continent collisions, creating an orogenic belt. Structural trends and prospectivity are then analyzed in terms of belts across the country; the Fold Belt (with the discovered oil and gas fields), the Mobile Belt and the accreted arcs. This model inhibits realistic assessment of prospectivity. It now appears the Mobile Belt formed by Oligocene compression then by Early Miocene extension, related to slab-rollback, that unroofed metamorphic core complexes adjacent to starved half-grabens. The grabens filled in the Middle Miocene and were largely transported intact during the Pliocenemore » arc-collision. Early Miocene reefs and hypothesized starved basin source rocks create a viable play throughout northern New Guinea as in the Salawati Basin. The Pliocene clastic section is locally prospective due to overthrusting and deep burial. Within the Fold Belt, the site and types of oil and gas fields are largely controlled by the basement architecture. This controlled the transfer zones and depocentres during Mesozoic extension and the location of major basement uplifts during compression. In PNG, the Bosavi lineament separates an oil province from a gas province. In Irian Jaya the transition from a relatively competent sequence to a rifted sequence west of [approx]139[degrees]E may also be a gas-oil province boundary. Understanding, in detail, the compartmentalization of inverted blocks and areas of thin-skinned thrusting, controlled by the basement architecture, will help constrain hydrocarbon prospectivity.« less

  9. Hydrocarbons in New Guinea, controlled by basement fabric, Mesozoic extension and Tertiary convergent margin tectonics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hill, K.C.; Kendrick, R.D.; Crowhurst, P.V.

    1996-12-31

    Most models for the tectonic evolution of New Guinea involve Early and Late Miocene arc-continent collisions, creating an orogenic belt. Structural trends and prospectivity are then analyzed in terms of belts across the country; the Fold Belt (with the discovered oil and gas fields), the Mobile Belt and the accreted arcs. This model inhibits realistic assessment of prospectivity. It now appears the Mobile Belt formed by Oligocene compression then by Early Miocene extension, related to slab-rollback, that unroofed metamorphic core complexes adjacent to starved half-grabens. The grabens filled in the Middle Miocene and were largely transported intact during the Pliocenemore » arc-collision. Early Miocene reefs and hypothesized starved basin source rocks create a viable play throughout northern New Guinea as in the Salawati Basin. The Pliocene clastic section is locally prospective due to overthrusting and deep burial. Within the Fold Belt, the site and types of oil and gas fields are largely controlled by the basement architecture. This controlled the transfer zones and depocentres during Mesozoic extension and the location of major basement uplifts during compression. In PNG, the Bosavi lineament separates an oil province from a gas province. In Irian Jaya the transition from a relatively competent sequence to a rifted sequence west of {approx}139{degrees}E may also be a gas-oil province boundary. Understanding, in detail, the compartmentalization of inverted blocks and areas of thin-skinned thrusting, controlled by the basement architecture, will help constrain hydrocarbon prospectivity.« less

  10. Sonographic evaluation of the bladder neck in continent and stress-incontinent women.

    PubMed

    Schaer, G N; Perucchini, D; Munz, E; Peschers, U; Koechli, O R; Delancey, J O

    1999-03-01

    To evaluate a new sonographic method to measure depth and width of proximal urethral dilation during coughing and Valsalva maneuver and to report its use in a group of stress-incontinent and continent women. Fifty-eight women were evaluated, 30 with and 28 without stress incontinence proven urodynamically, with a bladder volume of 300 mL and the subjects upright. Urethral pressure profiles at rest were performed with a 10 French microtip pressure catheter. Bladder neck dilation and descent were assessed by perineal ultrasound (5 MHz curved linear array transducer) with the help of ultrasound contrast medium (galactose suspension-Echovist-300), whereas abdominal pressure was assessed with an intrarectal balloon catheter. Statistical analysis used the nonparametric Mann-Whitney test. The depth and diameter of urethral dilation could be measured in all women. During Valsalva, all 30 incontinent women exhibited urethral dilation. One incontinent woman showed dilation only while performing a Valsalva maneuver, not during coughing. In the continent group, 12 women presented dilation during Valsalva and six during coughing. In continent women, dilation was visible only in those who were parous. Nulliparous women did not have dilation during Valsalva or coughing. Bladder neck descent was visible in continent and incontinent women. This method permits quantification of depth and diameter of bladder neck dilation, showing that both incontinent and continent women might have bladder neck dilation and that urinary continence can be established at different locations along the urethra in different women. Parity seems to be a main prerequisite for a proximal urethral defect with bladder neck dilation.

  11. Are natural and unnatural appetites equally controllable? A response to Jensen's "Is continence enough?".

    PubMed

    Smith, Janet E

    2004-01-01

    This response challenges Jensen's analysis in no substantial way. Rather, it explains more fully some of the moral character categories that Aristotle provides. It argues that Aristotle understood there to be two forms of continence: the continence that enables us to control natural appetites and"some form"of continence directed towards unnatural appetites, generally engendered by some pathology or abuse.

  12. Subalkaline andesite from Valu Fa Ridge, a back-arc spreading center in southern Lau Basin: petrogenesis, comparative chemistry, and tectonic implications

    USGS Publications Warehouse

    Vallier, T.L.; Jenner, G.A.; Frey, F.A.; Gill, J.B.; Davis, A.S.; Volpe, A.M.; Hawkins, J.W.; Morris, J.D.; Cawood, Peter A.; Morton, J.L.; Scholl, D. W.; Rautenschlein, M.; White, W.M.; Williams, Ross W.; Stevenson, A.J.; White, L.D.

    1991-01-01

    Tholeiitic andesite was dredged from two sites on Valu Fa Ridge (VFR), a back-arc spreading center in Lau Basin. Valu Fa Ridge, at least 200 km long, is located 40-50 km west of the active Tofua Volcanic Arc (TVA) axis and lies about 150 km above the subducted oceanic plate. One or more magma chambers, traced discontinuously for about 100 km along the ridge axis, lie 3-4 km beneath the ridge. The mostly aphyric and glassy lavas had high volatile contents, as shown by the abundance and large sizes of vesicles. An extensive fractionation history is inferred from the high SiO2 contents and FeO* MgO ratios. Chemical data show that the VFR lavas have both volcanic arc and back-arc basin affinities. The volcanic arc characteristics are: (1) relatively high abundances of most alkali and alkaline earth elements; (2) low abundances of high field strength elements Nb and Ta; (3) high U/Th ratios; (4) similar radiogenic isotope ratios in VFR and TVA lavas, in particular the enrichment of 87Sr 86Sr relative to 206Pb 204Pb; (5) high 238U 230Th, 230Th 232Th, and 226Ra 230Th activity ratios; and (6) high ratios of Rb/Cs, Ba/Nb, and Ba/La. Other chemical characteristics suggest that the VFR lavas are related to MORB-type back-arc basin lavas. For example, VFR lavas have (1) lower 87Sr 86Sr ratios and higher 143Nd 144Nd ratios than most lavas from the TVA, except samples from Ata Island, and are similar to many Lau Basin lavas; (2) lower Sr/REE, Rb/Zr, and Ba/Zr ratios than in arc lavas; and (3) higher Ti, Fe, and V, and higher Ti/V ratios than arc lavas generally and TVA lavas specifically. Most characteristics of VFR lavas can be explained by mixing depleted mantle with either small amounts of sediment and fluids from the subducting slab and/or an older fragment of volcanic arc lithosphere. The eruption of subalkaline andesite with some arc affinities along a back-arc spreading ridge is not unique. Collision of the Louisville and Tonga ridges probably activated back-arc extension

  13. Volcanic arc emplacement onto the southernmost Appalachian Laurentian shelf: Characteristics and constraints

    USGS Publications Warehouse

    Tull, J.F.; Barineau, C.I.; Mueller, P.A.; Wooden, J.L.

    2007-01-01

    In the southernmost Appalachians, the Hillabee Greenstone, an Ordovician volcanic arc fragment, lies directly atop the outermost Laurentian Devonian-earliest Mississippian(?) shelf sequence at the structural top of the greenschist facies Talladega belt, the frontal metamorphic allochthon along this orogenic segment. The Hillabee Greenstone was emplaced between latest Devonian and middle Mississippian time. It and the uppermost Laurentian section were later repeated together within a series of map-scale imbricate slices of a postmetamorphic, dextral, transpressional, Alleghanian thrust duplex system that placed the high-grade eastern Blue Ridge allochthon atop the Talladega belt. Geochemical and geochronologic (U-Pb zircon) studies indicate that the Hillabee Greenstone's interstratified tholeiitic metabasalt and calc-alkaline metadacite/rhyolite formed within an extensional setting on continental crust ca. 460-470 Ma. Palinspastic reconstructions of the southern Appalachian Ordovician margin place the Hillabee Greenstone outboard of the present position of the Pine Mountain terrane and suggest links to Ordovician plutonism in the overlying eastern Blue Ridge, and possibly to widespread K-bentonite deposits within Ordovician platform units. The tectonic evolution of the Hillabee Greenstone exhibits many unusual and intriguing features, including: (1) premetamorphic emplacement along a basal cryptic thrust, which is remarkably concordant to both hanging wall and footwall sequences across its entire extent (>230 km), (2) formation, transport, and emplacement of the arc fragment accompanied by minimal deformation of the Hillabee Greenstone and underlying outer-margin shelf rocks, (3) emplacement temporally coincident with the adjacent collision of the younger, tectonically independent Ouachita volcanic arc with southeastern Laurentia. These features highlight strong contrasts in the Ordovician-Taconian evolution of the southern and northern parts of the Appalachian

  14. Paradoxical increase in cigarette smuggling after the market opening in Taiwan.

    PubMed

    Wen, C P; Peterson, R A; Cheng, T Y D; Tsai, S P; Eriksen, M P; Chen, T

    2006-06-01

    To assess the magnitude of cigarette smuggling after the market opened in Taiwan. Review of tobacco industry documents for references to smuggling activities related to Taiwan and government statistics on seizure of smuggled cigarettes. The market opening in 1987 led to an increase in smuggling. Contraband cigarettes became as available as legal ones, with only a small fraction (8%) being seized. Being specifically excluded from the market-opening, Japan entered the Taiwan market by setting up a Swiss plant as a legal cover for smuggling 10-20 times its legal quota of exports to Taiwan. Smuggling in Taiwan contributed to increased consumption of foreign brands, particularly by the young. Taiwan, not a member of the World Health Organization, was excluded from the East Asian 16-member "Project Crocodile", a regional anti-smuggling collaborative effort to implement the Framework Convention on Tobacco Control. Taiwan showed a sharp increase in smuggling after market liberalisation. Being excluded from the international community, Taiwan faces an uphill battle to fight smuggling alone. If Taiwan remained as its weakest link, global efforts to reduce tobacco use will be undermined, particularly for countries in the East Asian region.

  15. Filtered cathodic arc source

    DOEpatents

    Falabella, S.; Sanders, D.M.

    1994-01-18

    A continuous, cathodic arc ion source coupled to a macro-particle filter capable of separation or elimination of macro-particles from the ion flux produced by cathodic arc discharge is described. The ion source employs an axial magnetic field on a cathode (target) having tapered sides to confine the arc, thereby providing high target material utilization. A bent magnetic field is used to guide the metal ions from the target to the part to be coated. The macro-particle filter consists of two straight solenoids, end to end, but placed at 45[degree] to one another, which prevents line-of-sight from the arc spot on the target to the parts to be coated, yet provides a path for ions and electrons to flow, and includes a series of baffles for trapping the macro-particles. 3 figures.

  16. Effect of acoustic field parameters on arc acoustic binding during ultrasonic wave-assisted arc welding.

    PubMed

    Xie, Weifeng; Fan, Chenglei; Yang, Chunli; Lin, Sanbao

    2016-03-01

    As a newly developed arc welding method, power ultrasound has been successfully introduced into arc and weld pool during ultrasonic wave-assisted arc welding process. The advanced process for molten metals can be realized by utilizing additional ultrasonic field. Under the action of the acoustic wave, the plasma arc as weld heat source is regulated and its characteristics make an obvious change. Compared with the conventional arc, the ultrasonic wave-assisted arc plasma is bound significantly and becomes brighter. To reveal the dependence of the acoustic binding force on acoustic field parameters, a two-dimensional acoustic field model for ultrasonic wave-assisted arc welding device is established. The influences of the radiator height, the central pore radius, the radiator radius, and curvature radius or depth of concave radiator surface are discussed using the boundary element method. Then the authors analyze the resonant mode by this relationship curve between acoustic radiation power and radiator height. Furthermore, the best acoustic binding ability is obtained by optimizing the geometric parameters of acoustic radiator. In addition, three concave radiator surfaces including spherical cap surface, paraboloid of revolution, and rotating single curved surface are investigated systematically. Finally, both the calculation and experiment suggest that, to obtain the best acoustic binding ability, the ultrasonic wave-assisted arc welding setup should be operated under the first resonant mode using a radiator with a spherical cap surface, a small central pore, a large section radius and an appropriate curvature radius. Copyright © 2015 Elsevier B.V. All rights reserved.

  17. Quality audit--a review of the literature concerning delivery of continence care.

    PubMed

    Swaffield, J

    1995-09-01

    This paper outlines the role of quality audit within the framework of quality assurance, presenting the concurrent and retrospective approaches available. The literature survey provides a review of the limited audit tools available and their application to continence services and care delivery, as well as attempts to produce tools from national and local standard setting. Audit is part of a process; it can involve staff, patients and their relatives and the team of professionals providing care, as well as focusing on organizational and management levels. In an era of market delivery of services there is a need to justify why audit is important to continence advisors and managers. Effectiveness, efficiency and economics may drive the National Health Service, but quality assurance, which includes standards and audit tools, offers the means to ensure the quality of continence services and care to patients and auditing is also required in the purchaser/provider contracts for patient services. An overview and progress to date of published and other a projects in auditing continence care and service is presented. By outlining and highlighting the audit of continence service delivery and care as a basis on which to build quality assurance programmes, it is hoped that this knowledge will be shared through the setting up of a central auditing clearing project.

  18. Smart wireless continence management system for persons with dementia.

    PubMed

    Wai, Aung Aung Phyo; Fook, Victor Foo Siang; Jayachandran, Maniyeri; Biswas, Jit; Nugent, Chris; Mulvenna, Maurice; Lee, Jer-En; Kiat, Philp Yap Lian

    2008-10-01

    Incontinence is highly prevalent in the elderly population, especially in nursing home residents with dementia. It is a distressing and costly health problem that affects not only the patients but also the caregivers. Effective continence management is required to provide quality care, and to eliminate high labor costs and annoyances to the caregivers resulting from episodes of incontinence. This paper presents the design, development, and preliminary deployment of a smart wireless continence management system for dementia-impaired elderly or patients in institutional care settings such as nursing homes and hospitals. Specifically, the mote wireless platform was used to support the deployment of potentially large quantities of wetness sensors with wider coverage and with dramatically less complexity and cost. It consists of an intelligent signal relay mechanism so that the residents are free to move about in the nursing home or hospital and allows personalized continence management service. Preliminary results from a trial in a local nursing home are promising and can significantly improve the quality of care for patients.

  19. Electric arc saw apparatus

    DOEpatents

    Deichelbohrer, Paul R [Richland, WA

    1986-01-01

    A portable, hand held electric arc saw has a small frame for supporting an electrically conducting rotary blade which serves as an electrode for generating an electric arc to erode a workpiece. Electric current is supplied to the blade by biased brushes and a slip ring which are mounted in the frame. A pair of freely movable endless belts in the form of crawler treads stretched between two pulleys are used to facilitate movement of the electric arc saw. The pulleys are formed of dielectric material to electrically insulate the crawler treads from the frame.

  20. The crustal structures from Wuyi-Yunkai orogen to Taiwan orogen: the onshore-offshore wide-angle seismic experiment of TAIGER and ATSEE projects

    NASA Astrophysics Data System (ADS)

    Kuochen, H.; Kuo, N. Y. W.; Wang, C. Y.; Jin, X.; Cai, H. T.; Lin, J. Y.; Wu, F. T.; Yen, H. Y.; Huang, B. S.; Liang, W. T.; Okaya, D. A.; Brown, L. D.

    2015-12-01

    The crustal structure is key information for understanding the tectonic framework and geological evolution in the southeastern China and its adjacent area. In this study, we integrated the data sets from the TAIGER and ATSEE projects to resolve onshore-offshore deep crustal seismic profiles from the Wuyi-Yunkai orogen to the Taiwan orogen in southeastern China. Totally, there are three seismic profiles resolved and the longest profile is 850 km. Unlike 2D and 3D first arrival travel-time tomography from previous studies, we used both refracted and reflected phases (Pg, Pn, PcP, and PmP) to model the crustal structures and the crustal reflectors. 40 shots, 2 earthquakes, and about 1,950 stations were used and 15,319 arrivals were picked among three transects. As a result, the complex crustal evolution since Paleozoic era are shown, which involved the closed Paleozoic rifted basin in central Fujian, the Cenozoic extension due to South China sea opening beneath the coastline of southern Fujian, and the on-going collision of the Taiwan orogen.