Does the choice of tariff matter?

PubMed Central

Zhao, Yue; Li, Shun-Ping; Liu, Liu; Zhang, Jiang-Lin; Chen, Gang

2017-01-01

Abstract There is an increasing trend globally to develop country-specific tariffs that can theoretically better reflect population's preferences on health states for preference-based health-related quality-of-life instruments, also known as multiattribute utility instruments. This study focused on the most recently developed 5-level version of EuroQol-5 Dimension (EQ-5D) questionnaire, 1 of the world's most well-known multiattribute utility instruments, and aimed to empirically explore the agreements and known-group validities of applying the country-specific tariff versus tariffs developed from other countries using a sample of psoriasis vulgaris patients in Mainland China. A convenience sampling framework was adopted to recruit patients diagnosed with psoriasis vulgaris from Xiangya Hospital, Central South University, China, between May 2014 and February 2015. The 5-level EuroQol-5 dimensions (EQ-5D-5L) utilities were scored by using the Chinese, Japanese, and UK tariffs. Health state utilities were compared using a range of nonparametric test. The intraclass correlation coefficients and Bland–Altman plots were used to examine the agreements among the 3 EQ-5D-5L scores. Health state utility decrements between known groups were investigated using both effect size and a regression analysis. In all, 350 patients (aged 16 years or older) were recruited. There were significant differences among the 3 national tariff sets. Overall, 3 tariffs showed excellent agreements (intraclass correlation coefficient >0.90); however, the wide limits of agreement from the Bland–Altman plots suggest that these tariffs cannot be used interchangeably. The EQ-5D-5L scores using the Chinese-specific tariff showed the best known-group validity than the other 2 tariffs in this Chinese patient sample. The evidence from this study supports the choice of the country-specific tariff to be used in Mainland China. PMID:28834893

18 CFR 341.3 - Form of tariff.

Code of Federal Regulations, 2011 CFR

2011-04-01

... to which the tariff is issued; (vi) The issue date, which must be shown on the lower left side, and...] New + [N] (ii) Reissued items must include in the square or brackets the number of the tariff... prior tariff publication, the new tariff publication must indicate the cancellation. If such omissions...

18 CFR 341.3 - Form of tariff.

Code of Federal Regulations, 2010 CFR

2010-04-01

... to which the tariff is issued; (vi) The issue date, which must be shown on the lower left side, and...] New + [N] (ii) Reissued items must include in the square or brackets the number of the tariff... prior tariff publication, the new tariff publication must indicate the cancellation. If such omissions...

14 CFR 221.212 - Special tariff permission.

Code of Federal Regulations, 2011 CFR

2011-01-01

... electronic submission. Such paper submission shall be in the form of a revised tariff page rather than as a separate request for Special Tariff Permission. All material being submitted on a paper tariff page as part of an electronic submission will clearly indicate the portion(s) of such tariff page that is being...

14 CFR 399.35 - Special tariff permission.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Special tariff permission. (a) Definition. As used in this section, to grant STP means to approve a carrier's application for Special Tariff Permission to file a tariff on less than the statutory notice set... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Special tariff permission. 399.35 Section...

46 CFR 520.7 - Tariff limitations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the time the shipment is tendered for ocean transportation. (f) Conference situations. (1) New members... notice is published in the conference tariff. (2) New conference agreements have ninety (90) days within which to publish a new tariff. (g) Overcharge claims. (1) No tariff may limit the filing of overcharge...

18 CFR 341.9 - Index of tariffs.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Index of tariffs. 341.9... SUBJECT TO SECTION 6 OF THE INTERSTATE COMMERCE ACT § 341.9 Index of tariffs. (a) In general. Each carrier must publish as a separate tariff publication under its FERC Tariff numbering system, a complete index...

47 CFR 1.772 - Application for special tariff permission.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Application for special tariff permission. 1... Complaints, Applications, Tariffs, and Reports Involving Common Carriers Tariffs § 1.772 Application for special tariff permission. Applications under section 203 of the Communications Act for special tariff...

49 CFR 1312.8 - Identification of tariff publication.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Identification of tariff publication. 1312.8... THE PUBLICATION, POSTING AND FILING OF TARIFFS FOR THE TRANSPORTATION OF PROPERTY BY OR WITH A WATER CARRIER IN NONCONTIGUOUS DOMESTIC TRADE § 1312.8 Identification of tariff publication. (a) Every tariff...

49 CFR 1312.8 - Identification of tariff publication.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 9 2013-10-01 2013-10-01 false Identification of tariff publication. 1312.8... THE PUBLICATION, POSTING AND FILING OF TARIFFS FOR THE TRANSPORTATION OF PROPERTY BY OR WITH A WATER CARRIER IN NONCONTIGUOUS DOMESTIC TRADE § 1312.8 Identification of tariff publication. (a) Every tariff...

14 CFR 221.400 - Filing of paper tariffs required.

Code of Federal Regulations, 2010 CFR

2010-01-01

... PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Electronically Filed Tariffs § 221.400 Filing of paper tariffs... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Filing of paper tariffs required. 221.400...; and (2) Simultaneously cancel such records from the paper tariff in the manner prescribed by subparts...

14 CFR 221.400 - Filing of paper tariffs required.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Filing of paper tariffs required. 221.400... PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Electronically Filed Tariffs § 221.400 Filing of paper tariffs...; and (2) Simultaneously cancel such records from the paper tariff in the manner prescribed by subparts...

14 CFR 221.91 - Delivering tariff publications to Department.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Filing Tariff Publications With Department § 221.91... responsibility of processing tariffs. No tariff publication will be accepted by the Department unless it is...

Supporting Effective Feed-in Tariff Development in Malaysia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Since 2011, Malaysia's overarching policy framework for clean energy development, the New Energy Policy, has led to significant deployment of renewable energy and energy efficiency. Building on the New Energy Policy, Malaysia mandated adoption of a renewable energy feed-in tariff (FiT) mechanism under the 2011 Renewable Energy Act. In 2013, Malaysia's Sustainable Energy Development Authority partnered with the Clean Energy Solutions Center and the Clean Energy Regulators Initiative (CERI), via the Ask an Expert service, to implement FiT policies and expand renewable energy development. Through collaboration between the government of Malaysia and the Clean Energy Solutions Center, concrete policy actionmore » was supported and implemented, building a strong framework to expand and catalyze clean energy development.« less

48 CFR 252.239-7006 - Tariff information.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Tariff information. 252... Provisions And Clauses 252.239-7006 Tariff information. As prescribed in 239.7411(a), use the following clause: Tariff Information (JUL 1997) (a) The Contractor shall provide to the Contracting Officer— (1...

14 CFR 221.212 - Special tariff permission.

Code of Federal Regulations, 2010 CFR

2010-01-01

... PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Electronically Filed Tariffs § 221.212 Special tariff permission. (a... authority is sought to effect changes on less than bilateral/statutory notice, and it contains related paper under § 221.195, the paper submission must bear the same filing advice number as that used for the...

49 CFR 1310.3 - Contents of tariffs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 9 2011-10-01 2011-10-01 false Contents of tariffs. 1310.3 Section 1310.3 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS TARIFF REQUIREMENTS FOR HOUSEHOLD GOODS CARRIERS § 1310.3 Contents of tariffs. (a...

A Classroom Tariff-Setting Game

ERIC Educational Resources Information Center

Winchester, Niven

2006-01-01

The author outlines a classroom tariff-setting game that allows students to explore the consequences of import tariffs imposed by large countries (countries able to influence world prices). Groups of students represent countries, which are organized into trading pairs. Each group's objective is to maximize welfare by choosing an appropriate ad…

14 CFR 221.72 - Reinstating canceled or expired tariff provisions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Reinstating canceled or expired tariff... (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Amendment of Tariffs § 221.72 Reinstating canceled or expired tariff provisions. Any fares, rules, or other tariff provisions which have been canceled or which...

14 CFR 221.500 - Transmission of electronic tariffs to subscribers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Electronically Filed Tariffs § 221.500... to any subscriber to the on-line tariff database, including access to the justification required by... machine-readable data (raw tariff data) of all daily transactions made to its on-line tariff database. The...

Integrated Building Energy Systems Design Considering Storage Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stadler, Michael; Marnay, Chris; Siddiqui, Afzal

The addition of storage technologies such as flow batteries, conventional batteries, and heat storage can improve the economic, as well as environmental attraction of micro-generation systems (e.g., PV or fuel cells with or without CHP) and contribute to enhanced demand response. The interactions among PV, solar thermal, and storage systems can be complex, depending on the tariff structure, load profile, etc. In order to examine the impact of storage technologies on demand response and CO2 emissions, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program that can pursue two strategies as its objective function.more » These two strategies are minimization of its annual energy costs or of its CO2 emissions. The problem is solved for a given test year at representative customer sites, e.g., nursing homes, to obtain not only the optimal investment portfolio, but also the optimal hourly operating schedules for the selected technologies. This paper focuses on analysis of storage technologies in micro-generation optimization on a building level, with example applications in New York State and California. It shows results from a two-year research projectperformed for the U.S. Department of Energy and ongoing work. Contrary to established expectations, our results indicate that PV and electric storage adoption compete rather than supplement each other considering the tariff structure and costs of electricity supply. The work shows that high electricity tariffs during on-peak hours are a significant driver for the adoption of electric storage technologies. To satisfy the site's objective of minimizing energy costs, the batteries have to be charged by grid power during off-peak hours instead of PV during on-peak hours. In contrast, we also show a CO2 minimization strategy where the common assumption that batteries can be charged by PV can be fulfilled at extraordinarily high energy costs for the site.« less

Maximum demand charge rates for commercial and industrial electricity tariffs in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

McLaren, Joyce; Gagnon, Pieter; Zimny-Schmitt, Daniel

NREL has assembled a list of U.S. retail electricity tariffs and their associated demand charge rates for the Commercial and Industrial sectors. The data was obtained from the Utility Rate Database. Keep the following information in mind when interpreting the data: (1) These data were interpreted and transcribed manually from utility tariff sheets, which are often complex. It is a certainty that these data contain errors, and therefore should only be used as a reference. Actual utility tariff sheets should be consulted if an action requires this type of data. (2) These data only contains tariffs that were entered intomore » the Utility Rate Database. Since not all tariffs are designed in a format that can be entered into the Database, this list is incomplete - it does not contain all tariffs in the United States. (3) These data may have changed since this list was developed (4) Many of the underlying tariffs have additional restrictions or requirements that are not represented here. For example, they may only be available to the agricultural sector or closed to new customers. (5) If there are multiple demand charge elements in a given tariff, the maximum demand charge is the sum of each of the elements at any point in time. Where tiers were present, the highest rate tier was assumed. The value is a maximum for the year, and may be significantly different from demand charge rates at other times in the year. Utility Rate Database: https://openei.org/wiki/Utility_Rate_Database« less

14 CFR 221.103 - Notice of tariff terms.

Code of Federal Regulations, 2010 CFR

2010-01-01

... reading as follows: Public Inspection of Tariffs All the currently effective passenger tariffs to which this company is a party and all passenger tariff publications which have been issued but are not yet effective are on file in this office, so far as they apply to traffic from or to. (Here name the point...

School Building Design Asia.

ERIC Educational Resources Information Center

Asian Regional Inst. for School Building Research, Colombo (Sri Lanka).

Guidelines are presented for the design, costs, and use of primary and secondary general schools in the 18 countries comprising the Asian region served by UNESCO. Because of the great diversity in climate, building design and construction skills, and resources in these countries, the generalizations about school building design and furniture…

75 FR 82382 - Electronic Tariff Filings; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-30

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM01-5-000] Electronic... electronic filing of tariff and tariff related materials pursuant to Order No. 714.\\1\\ The technical... implementation of eTariff. \\1\\ Electronic Tariff Filings, Order No. 714, 73 FR 57,515 (Oct. 3, 2008), 124 FERC...

Tariff Considerations for Micro-Grids in Sub-Saharan Africa

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reber, Timothy J.; Booth, Samuel S.; Cutler, Dylan S.

This report examines some of the key drivers and considerations policymakers and decision makers face when deciding if and how to regulate electricity tariffs for micro-grids. Presenting a range of tariff options, from mandating some variety of national (uniform) tariff to allowing micro-grid developers and operators to set fully cost-reflective tariffs, it examines various benefits and drawbacks of each. In addition, the report and explores various types of cross-subsidies and other transitional forms of regulation that may offer a regulatory middle ground that can help balance the often competing goals of providing price control on electricity service in the namemore » of social good while still providing a means for investors to ensure high enough returns on their investment to attract the necessary capital financing to the market. Using the REopt tool developed by the U.S. Department of Energy's National Renewable Energy Laboratory to inform their study, the authors modeled a few representative micro-grid systems and the resultant levelized cost of electricity, lending context and scale to the consideration of these tariff questions. This simple analysis provides an estimate of the gap between current tariff regimes and the tariffs that would be necessary for developers to recover costs and attract investment, offering further insight into the potential scale of subsidies or other grants that may be required to enable micro-grid development under current regulatory structures. It explores potential options for addressing this gap while trying to balance This report examines some of the key drivers and considerations policymakers and decision makers face when deciding if and how to regulate electricity tariffs for micro-grids. Presenting a range of tariff options, from mandating some variety of national (uniform) tariff to allowing micro-grid developers and operators to set fully cost-reflective tariffs, it examines various benefits and drawbacks of each. In

Electricity demand and storage dispatch modeling for buildings and implications for the smartgrid

NASA Astrophysics Data System (ADS)

Zheng, Menglian; Meinrenken, Christoph

2013-04-01

As an enabler for demand response (DR), electricity storage in buildings has the potential to lower costs and carbon footprint of grid electricity while simultaneously mitigating grid strain and increasing its flexibility to integrate renewables (central or distributed). We present a stochastic model to simulate minute-by-minute electricity demand of buildings and analyze the resulting electricity costs under actual, currently available DR-enabling tariffs in New York State, namely a peak/offpeak tariff charging by consumed energy (monthly total kWh) and a time of use tariff charging by power demand (monthly peak kW). We then introduce a variety of electrical storage options (from flow batteries to flywheels) and determine how DR via temporary storage may increase the overall net present value (NPV) for consumers (comparing the reduced cost of electricity to capital and maintenance costs of the storage). We find that, under the total-energy tariff, only medium-term storage options such as batteries offer positive NPV, and only at the low end of storage costs (optimistic scenario). Under the peak-demand tariff, however, even short-term storage such as flywheels and superconducting magnetic energy offer positive NPV. Therefore, these offer significant economic incentive to enable DR without affecting the consumption habits of buildings' residents. We discuss implications for smartgrid communication and our future work on real-time price tariffs.

SOLAR EFFECTS ON BUILDING DESIGN.

ERIC Educational Resources Information Center

Building Research Inst., Inc., Washington, DC.

A REPORT OF A PROGRAM HELD AS PART OF THE BUILDING RESEARCH INSTITUTE 1962 SPRING CONFERENCE ON THE SOLAR EFFECTS ON BUILDING DESIGN. TOPICS DISCUSSED ARE--(1) SOLAR ENERGY DATA APPLICABLE TO BUILDING DESIGN, (2) THERMAL EFFECTS OF SOLAR RADIATION ON MAN, (3) SOLAR EFFECTS ON ARCHITECTURE, (4) SOLAR EFFECTS ON BUILDING COSTS, (5) SELECTION OF…

Checklist of Library Building Design Considerations.

ERIC Educational Resources Information Center

Sannwald, William W., Ed.; Smith, Robert S., Ed.

This checklist is designed to provide librarians, architects, and other members of a building design team with a list of questions to ask during the design phase of a new or remodeled library building project. The purpose of the questions is to make sure that no element of the building is overlooked by the building design team in their programming…

Exploring the impact of network tariffs on household electricity expenditures using load profiles and socio-economic characteristics

NASA Astrophysics Data System (ADS)

Azarova, Valeriya; Engel, Dominik; Ferner, Cornelia; Kollmann, Andrea; Reichl, Johannes

2018-04-01

Growing self-generation and storage are expected to cause significant changes in residential electricity utilization patterns. Commonly applied volumetric network tariffs may induce imbalance between different groups of households and their respective contribution to recovering the operating costs of the grid. Understanding consumer behaviour and appliance usage together with socio-economic factors can help regulatory authorities to adapt network tariffs to new circumstances in a fair way. Here, we assess the effects of 11 network tariff scenarios on household budgets using real load profiles from 765 households. Thus we explore the possibly disruptive impact of applying peak-load-based tariffs on the budgets of households when they have been mainly charged for consumed volumes before. Our analysis estimates the change in household network expenditure for different combinations of energy, peak and fixed charges, and can help to design tariffs that recover the costs needed for the sustainable operation of the grid.

14 CFR 221.300 - Discontinuation of electronic tariff system.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Discontinuation of electronic tariff system... of electronic tariff system. In the event that the electronic tariff system is discontinued, or the source of the data is changed, or a filer discontinues its business, all electronic data records prior to...

14 CFR 221.300 - Discontinuation of electronic tariff system.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Discontinuation of electronic tariff system... of electronic tariff system. In the event that the electronic tariff system is discontinued, or the source of the data is changed, or a filer discontinues its business, all electronic data records prior to...

14 CFR 221.300 - Discontinuation of electronic tariff system.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Discontinuation of electronic tariff system... of electronic tariff system. In the event that the electronic tariff system is discontinued, or the source of the data is changed, or a filer discontinues its business, all electronic data records prior to...

14 CFR 221.300 - Discontinuation of electronic tariff system.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Discontinuation of electronic tariff system... of electronic tariff system. In the event that the electronic tariff system is discontinued, or the source of the data is changed, or a filer discontinues its business, all electronic data records prior to...

14 CFR 221.500 - Transmission of electronic tariffs to subscribers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to any subscriber to the on-line tariff database, including access to the justification required by... machine-readable data (raw tariff data) of all daily transactions made to its on-line tariff database. The...

14 CFR 221.500 - Transmission of electronic tariffs to subscribers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to any subscriber to the on-line tariff database, including access to the justification required by... machine-readable data (raw tariff data) of all daily transactions made to its on-line tariff database. The...

14 CFR 221.500 - Transmission of electronic tariffs to subscribers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... to any subscriber to the on-line tariff database, including access to the justification required by... machine-readable data (raw tariff data) of all daily transactions made to its on-line tariff database. The...

14 CFR 221.500 - Transmission of electronic tariffs to subscribers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... to any subscriber to the on-line tariff database, including access to the justification required by... machine-readable data (raw tariff data) of all daily transactions made to its on-line tariff database. The...

Rationale and design of the health economics evaluation registry for remote follow-up: TARIFF.

PubMed

Ricci, Renato P; D'Onofrio, Antonio; Padeletti, Luigi; Sagone, Antonio; Vicentini, Alfredo; Vincenti, Antonio; Morichelli, Loredana; Cavallaro, Ciro; Ricciardi, Giuseppe; Lombardi, Leonida; Fusco, Antonio; Rovaris, Giovanni; Silvestri, Paolo; Guidotto, Tiziana; Pollastrelli, Annalisa; Santini, Massimo

2012-11-01

The aims of the study are to develop a cost-minimization analysis from the hospital perspective and a cost-effectiveness analysis from the third payer standpoint, based on direct estimates of costs and QOL associated with remote follow-ups, using Merlin@home and Merlin.net, compared with standard ambulatory follow-ups, in the management of ICD and CRT-D recipients. Remote monitoring systems can replace ambulatory follow-ups, sparing human and economic resources, and increasing patient safety. TARIFF is a prospective, controlled, observational study aimed at measuring the direct and indirect costs and quality of life (QOL) of all participants by a 1-year economic evaluation. A detailed set of hospitalized and ambulatory healthcare costs and losses of productivity that could be directly influenced by the different means of follow-ups will be collected. The study consists of two phases, each including 100 patients, to measure the economic resources consumed during the first phase, associated with standard ambulatory follow-ups, vs. the second phase, associated with remote follow-ups. Remote monitoring systems enable caregivers to better ensure patient safety and the healthcare to limit costs. TARIFF will allow defining the economic value of remote ICD follow-ups for Italian hospitals, third payers, and patients. The TARIFF study, based on a cost-minimization analysis, directly comparing remote follow-up with standard ambulatory visits, will validate the cost effectiveness of the Merlin.net technology, and define a proper reimbursement schedule applicable for the Italian healthcare system. NCT01075516.

76 FR 43206 - Electronic Tariff Filing System (ETFS)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

...) Working papers and statistical data. (1) Concurrently with the filing of any tariff change or tariff... explanation of how the working papers relate to that information. (2) All statistical studies must be...

18 CFR 154.603 - Adoption of the tariff by a successor.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Adoption of the tariff by a successor. 154.603 Section 154.603 Conservation of Power and Water Resources FEDERAL ENERGY... Other Tariff Changes § 154.603 Adoption of the tariff by a successor. Whenever the tariff or contracts...

18 CFR 154.603 - Adoption of the tariff by a successor.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Adoption of the tariff by a successor. 154.603 Section 154.603 Conservation of Power and Water Resources FEDERAL ENERGY... Other Tariff Changes § 154.603 Adoption of the tariff by a successor. Whenever the tariff or contracts...

18 CFR 154.603 - Adoption of the tariff by a successor.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Adoption of the tariff by a successor. 154.603 Section 154.603 Conservation of Power and Water Resources FEDERAL ENERGY... Other Tariff Changes § 154.603 Adoption of the tariff by a successor. Whenever the tariff or contracts...

18 CFR 154.603 - Adoption of the tariff by a successor.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Adoption of the tariff by a successor. 154.603 Section 154.603 Conservation of Power and Water Resources FEDERAL ENERGY... Other Tariff Changes § 154.603 Adoption of the tariff by a successor. Whenever the tariff or contracts...

18 CFR 154.603 - Adoption of the tariff by a successor.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Adoption of the tariff by a successor. 154.603 Section 154.603 Conservation of Power and Water Resources FEDERAL ENERGY... Other Tariff Changes § 154.603 Adoption of the tariff by a successor. Whenever the tariff or contracts...

49 CFR 1312.5 - Amendments to tariffs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Amendments to tariffs. 1312.5 Section 1312.5 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS REGULATIONS FOR THE PUBLICATION, POSTING AND FILING OF TARIFFS FOR THE...

49 CFR 1312.5 - Amendments to tariffs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 9 2012-10-01 2012-10-01 false Amendments to tariffs. 1312.5 Section 1312.5 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS REGULATIONS FOR THE PUBLICATION, POSTING AND FILING OF TARIFFS FOR THE...

49 CFR 1312.5 - Amendments to tariffs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 9 2013-10-01 2013-10-01 false Amendments to tariffs. 1312.5 Section 1312.5 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS REGULATIONS FOR THE PUBLICATION, POSTING AND FILING OF TARIFFS FOR THE...

49 CFR 1312.5 - Amendments to tariffs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 9 2014-10-01 2014-10-01 false Amendments to tariffs. 1312.5 Section 1312.5 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS REGULATIONS FOR THE PUBLICATION, POSTING AND FILING OF TARIFFS FOR THE...

49 CFR 1312.5 - Amendments to tariffs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 9 2011-10-01 2011-10-01 false Amendments to tariffs. 1312.5 Section 1312.5 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS REGULATIONS FOR THE PUBLICATION, POSTING AND FILING OF TARIFFS FOR THE...

78 FR 46546 - Design-Build Contracting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

...-0043] RIN 2125-AF58 Design-Build Contracting AGENCY: Federal Highway Administration (FHWA), DOT. ACTION... alternative technical concepts (ATC) in design-build project delivery of highway construction. The revisions... design-build proposers to submit ATCs in their technical and price proposals. The FHWA seeks comments on...

The effect of the tariff on the maple industry

Treesearch

Paul E. Sendak

1972-01-01

The U. S. maple tariff is a tax on maple syrup and sugar imports from Canada into the United States. An analysis of the maple tariff indicates that it was never very effective in protecting the domestic maple industry from foreign competition. The tariff has been especially ineffective since World War II. Its removal will not hurt the U. S. maple syrup industry.

Guidelines for Interpretive Building Design.

ERIC Educational Resources Information Center

Manly, Richard J., Ed.

This booklet is intended to assist those planning nature centers to choose building designs appropriate for intended purposes. The publication presents a set of general interpretive building-site and design considerations compiled over years of experience in nature center design. These generalizations are complemented by examples of floor plans,…

75 FR 48629 - Electronic Tariff Filing System (ETFS)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-11

...In this document, the Federal Communications Commission (Commission) seeks comment on extending the electronic tariff filing requirement for incumbent local exchange carriers to all carriers that file tariffs and related documents. Additionally, the Commission seeks comment on the appropriate time frame for implementing this proposed requirement. The Commission also seeks comment on the proposal that the Chief of the Wireline Competition Bureau administer the adoption of this extended electronic filing requirement. Also, the Commission seeks comment on proposed rule changes to implement mandatory electronic tariff filing.

23 CFR 710.313 - Design-build projects.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Design-build projects. 710.313 Section 710.313 Highways... REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build...-way acquisition and clearance services may be incorporated into the design-build contract if allowed...

23 CFR 710.313 - Design-build projects.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Design-build projects. 710.313 Section 710.313 Highways... REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build...-way acquisition and clearance services may be incorporated into the design-build contract if allowed...

23 CFR 710.313 - Design-build projects.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Design-build projects. 710.313 Section 710.313 Highways... REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build...-way acquisition and clearance services may be incorporated into the design-build contract if allowed...

14 CFR 221.180 - Requirements for electronic filing of tariffs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... of Transportation, for the maintenance and security of the on-line tariff database. (b) No carrier or... to its on-line tariff database. The filer shall be responsible for the transportation, installation... installation or maintenance. (3) The filer shall provide public access to its on-line tariff database, at...

14 CFR 221.180 - Requirements for electronic filing of tariffs.

Code of Federal Regulations, 2014 CFR

2014-01-01

... of Transportation, for the maintenance and security of the on-line tariff database. (b) No carrier or... to its on-line tariff database. The filer shall be responsible for the transportation, installation... installation or maintenance. (3) The filer shall provide public access to its on-line tariff database, at...

14 CFR 221.180 - Requirements for electronic filing of tariffs.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of Transportation, for the maintenance and security of the on-line tariff database. (b) No carrier or... to its on-line tariff database. The filer shall be responsible for the transportation, installation... installation or maintenance. (3) The filer shall provide public access to its on-line tariff database, at...

14 CFR 221.180 - Requirements for electronic filing of tariffs.

Code of Federal Regulations, 2012 CFR

2012-01-01

... of Transportation, for the maintenance and security of the on-line tariff database. (b) No carrier or... to its on-line tariff database. The filer shall be responsible for the transportation, installation... installation or maintenance. (3) The filer shall provide public access to its on-line tariff database, at...

14 CFR 221.180 - Requirements for electronic filing of tariffs.

Code of Federal Regulations, 2011 CFR

2011-01-01

... of Transportation, for the maintenance and security of the on-line tariff database. (b) No carrier or... to its on-line tariff database. The filer shall be responsible for the transportation, installation... installation or maintenance. (3) The filer shall provide public access to its on-line tariff database, at...

14 CFR 389.26 - Special rules for tariff page filings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Special rules for tariff page filings. 389.26 Section 389.26 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION... § 389.26 Special rules for tariff page filings. (a) Tariffs issued by carriers. The filing fee for...

14 CFR 389.26 - Special rules for tariff page filings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Special rules for tariff page filings. 389.26 Section 389.26 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION... § 389.26 Special rules for tariff page filings. (a) Tariffs issued by carriers. The filing fee for...

14 CFR 152.607 - Building design requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Building design requirements. 152.607... (CONTINUED) AIRPORTS AIRPORT AID PROGRAM Energy Conservation in Airport Aid Program § 152.607 Building design... or major building modification project proposed at the airport. The building design, construction...

18 CFR 281.212 - Draft tariff and index of entitlements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Draft tariff and index... Rule § 281.212 Draft tariff and index of entitlements. (a) Each interstate pipeline shall prepare draft tariff sheets or sections and a draft index of entitlements in accordance with this subpart. (b) The...

18 CFR 281.212 - Draft tariff and index of entitlements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Draft tariff and index... Rule § 281.212 Draft tariff and index of entitlements. (a) Each interstate pipeline shall prepare draft tariff sheets or sections and a draft index of entitlements in accordance with this subpart. (b) The...

18 CFR 281.212 - Draft tariff and index of entitlements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Draft tariff and index... Rule § 281.212 Draft tariff and index of entitlements. (a) Each interstate pipeline shall prepare draft tariff sheets or sections and a draft index of entitlements in accordance with this subpart. (b) The...

18 CFR 281.212 - Draft tariff and index of entitlements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Draft tariff and index... Rule § 281.212 Draft tariff and index of entitlements. (a) Each interstate pipeline shall prepare draft tariff sheets or sections and a draft index of entitlements in accordance with this subpart. (b) The...

18 CFR 281.212 - Draft tariff and index of entitlements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Draft tariff and index... Rule § 281.212 Draft tariff and index of entitlements. (a) Each interstate pipeline shall prepare draft tariff sheets or sections and a draft index of entitlements in accordance with this subpart. (b) The...

Designing an Earthquake-Resistant Building

ERIC Educational Resources Information Center

English, Lyn D.; King, Donna T.

2016-01-01

How do cross-bracing, geometry, and base isolation help buildings withstand earthquakes? These important structural design features involve fundamental geometry that elementary school students can readily model and understand. The problem activity, Designing an Earthquake-Resistant Building, was undertaken by several classes of sixth- grade…

Participatory environmental governance in China: public hearings on urban water tariff setting.

PubMed

Zhong, Li-Jin; Mol, Arthur P J

2008-09-01

In the late 1990s China started to expand its market economic reform to the public sector, such as water services. This reform led to major changes in urban water management, including water tariff management. The reforms in water tariff management relate not only to tariffs, but also to the decision-making on tariffs. Water tariff decision-making seems to move away from China's conventional mode of highly centralized and bureaucratic policy- and decision-making. The legalization, institutionalization and performance of public hearings in water tariff management forms a crucial innovation in this respect. This article analyzes the emergence, development and current functioning of public hearings in water tariff setting, and assesses to what extent public hearings are part of a turning point in China's tradition of centralized bureaucratic decision-making, towards more transparent, decentralized and participative governance.

PSYCHOSOCIAL PHENOMENA AND BUILDING DESIGN.

ERIC Educational Resources Information Center

IZUMI, KIYOSHI

THE DEPTH OF PSYCHOSOCIAL CONSIDERATION VARIES WITH ARCHITECTURAL FUNCTION. THESE FACTORS INCREASE AS A BUILDING USAGE BECOMES MORE ANTHROPOPHILIC. SITUATIONS RELATING TO AMBIGUOUS DESIGN MUST BE ELIMINATED IN BUILDING DESIGN. PROBLEMS INVOLVING VISUAL PERCEPTION SUCH AS (1) GLASS DOORS, (2) APPARENT INSECURITY OF STRUCTURE, (3) AMBIGUOUS SYMBOLIC…

The impact of retail electricity tariff evolution on solar photovoltaic deployment

DOE PAGES

Gagnon, Pieter; Cole, Wesley J.; Frew, Bethany; ...

2017-11-10

Here, this analysis explores the impact that the evolution of retail electricity tariffs can have on the deployment of solar photovoltaics. It suggests that ignoring the evolution of tariffs resulted in up to a 36% higher prediction of the capacity of distributed PV in 2050, compared to scenarios that represented tariff evolution. Critically, the evolution of tariffs had a negligible impact on the total generation from PV $-$ both utility-scale and distributed $-$ in the scenarios that were examined.

The impact of retail electricity tariff evolution on solar photovoltaic deployment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gagnon, Pieter; Cole, Wesley J.; Frew, Bethany

Here, this analysis explores the impact that the evolution of retail electricity tariffs can have on the deployment of solar photovoltaics. It suggests that ignoring the evolution of tariffs resulted in up to a 36% higher prediction of the capacity of distributed PV in 2050, compared to scenarios that represented tariff evolution. Critically, the evolution of tariffs had a negligible impact on the total generation from PV $-$ both utility-scale and distributed $-$ in the scenarios that were examined.

14 CFR 221.120 - Grounds for approving or denying Special Tariff Permission applications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Tariff Permission applications. 221.120 Section 221.120 Aeronautics and Space OFFICE OF THE SECRETARY... approving applications for Special Tariff Permission to file on less than statutory notice the tariff changes necessary to correct such errors. Each application for Special Tariff Permission based on such...

Comparative analysis of port tariffs in the ESCAP region

DOT National Transportation Integrated Search

2002-01-01

Ports of the Economic and Social Commission for Asia and the Pacific (ESCAP) region have long-established tariff structures. Some tariffs are extremely complex while others are relatively simple. There is, however, an increasing desire on the part of...

Assessment of Distributed Generation Potential in JapaneseBuildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Marnay, Chris; Firestone, Ryan

2005-05-25

To meet growing energy demands, energy efficiency, renewable energy, and on-site generation coupled with effective utilization of exhaust heat will all be required. Additional benefit can be achieved by integrating these distributed technologies into distributed energy resource (DER) systems (or microgrids). This research investigates a method of choosing economically optimal DER, expanding on prior studies at the Berkeley Lab using the DER design optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM finds the optimal combination of installed equipment from available DER technologies, given prevailing utility tariffs, site electrical and thermal loads, and a menu of available equipment.more » It provides a global optimization, albeit idealized, that shows how the site energy loads can be served at minimum cost by selection and operation of on-site generation, heat recovery, and cooling. Five prototype Japanese commercial buildings are examined and DER-CAM applied to select the economically optimal DER system for each. The five building types are office, hospital, hotel, retail, and sports facility. Based on the optimization results, energy and emission reductions are evaluated. Furthermore, a Japan-U.S. comparison study of policy, technology, and utility tariffs relevant to DER installation is presented. Significant decreases in fuel consumption, carbon emissions, and energy costs were seen in the DER-CAM results. Savings were most noticeable in the sports facility (a very favourable CHP site), followed by the hospital, hotel, and office building.« less

Broken promise? Taxes and tariffs on insecticide treated mosquito nets.

PubMed

Alilio, Martin; Mwenesi, Halima; Barat, Lawrence M; Payes, Roshelle M; Prysor-Jones, Suzanne; Diara, Malick; McGuire, David; Shaw, Willard

2007-12-01

Seven years ago, the removal of taxes and tariffs on insecticide treated nets (ITNs) was considered one of the easiest resolutions for most countries to implement among the targets agreed upon at the African Summit on Roll Back Malaria in Abuja, Nigeria, on April 25, 2000. However, seven years later, 24 of the 39 Abuja signatories continue to impose taxes and tariffs on this life-saving tool. Taxes and tariffs significantly increase the price of an insecticide treated net, reduce affordability, and discourage the commercial sector from importing insecticide treated net products. Consequently, Roll Back Malaria partners are engaged in advocacy efforts to remove taxes and tariffs on insecticide treated nets in malaria-endemic countries of Africa. This viewpoint summarizes key obstacles to the removal of taxes and tariffs that have been identified through a review of country situations. To achieve the goal of producing and supplying more than 160 million insecticide treated nets needed to reach the revised Roll Back Malaria Partnership targets by 2010, tax and tariff reforms are urgently needed. Such reforms must be accompanied by country-specific systems to protect the poor (e.g., through voucher systems for vulnerable groups and other forms of targeted subsidies).

18 CFR 154.208 - Service of tariff filings on customers and other parties.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Service of tariff filings on customers and other parties. 154.208 Section 154.208 Conservation of Power and Water Resources... SCHEDULES AND TARIFFS Procedures for Changing Tariffs § 154.208 Service of tariff filings on customers and...

18 CFR 154.208 - Service of tariff filings on customers and other parties.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Service of tariff filings on customers and other parties. 154.208 Section 154.208 Conservation of Power and Water Resources... SCHEDULES AND TARIFFS Procedures for Changing Tariffs § 154.208 Service of tariff filings on customers and...

18 CFR 154.208 - Service of tariff filings on customers and other parties.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Service of tariff filings on customers and other parties. 154.208 Section 154.208 Conservation of Power and Water Resources... SCHEDULES AND TARIFFS Procedures for Changing Tariffs § 154.208 Service of tariff filings on customers and...

18 CFR 154.208 - Service of tariff filings on customers and other parties.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Service of tariff filings on customers and other parties. 154.208 Section 154.208 Conservation of Power and Water Resources... SCHEDULES AND TARIFFS Procedures for Changing Tariffs § 154.208 Service of tariff filings on customers and...

23 CFR 710.313 - Design-build projects.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Design-build projects. 710.313 Section 710.313 Highways... REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build..., the STD shall ensure that right-of-way is available prior to the start of physical construction on...

23 CFR 710.313 - Design-build projects.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Design-build projects. 710.313 Section 710.313 Highways... REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build..., the STD shall ensure that right-of-way is available prior to the start of physical construction on...

Global effects of accelerated tariff liberalization in the forest products sector to 2010.

Treesearch

Shushuai Zhu; Joseph Buongiorno; David J. Brooks

2002-01-01

This study projects the effects of tariff elimination on the world sector. Projections were done for two scenarios: (1) progressive tariff elimination according to the schedule agreed to under the current General Agreement on Tariff or Trade (GATT) and (2) complete elimination of tariff on wood products as proposed within the Asia-Pacific Economic Cooperation (APEC)...

14 CFR 221.202 - The filing of tariffs and amendments to tariffs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... time; (4) Proposed effective date; (5) Justification text; reference to geographic area and affected... part of official tariff”, in a manner acceptable to the Department. (c) A Historical File—which shall..., reference shall be made to that tariff containing the rule; (8) Rule text applicable to each fare at the...

Streamlining the Design-to-Build Transition with Build-Optimization Software Tools.

PubMed

Oberortner, Ernst; Cheng, Jan-Fang; Hillson, Nathan J; Deutsch, Samuel

2017-03-17

Scaling-up capabilities for the design, build, and test of synthetic biology constructs holds great promise for the development of new applications in fuels, chemical production, or cellular-behavior engineering. Construct design is an essential component in this process; however, not every designed DNA sequence can be readily manufactured, even using state-of-the-art DNA synthesis methods. Current biological computer-aided design and manufacture tools (bioCAD/CAM) do not adequately consider the limitations of DNA synthesis technologies when generating their outputs. Designed sequences that violate DNA synthesis constraints may require substantial sequence redesign or lead to price-premiums and temporal delays, which adversely impact the efficiency of the DNA manufacturing process. We have developed a suite of build-optimization software tools (BOOST) to streamline the design-build transition in synthetic biology engineering workflows. BOOST incorporates knowledge of DNA synthesis success determinants into the design process to output ready-to-build sequences, preempting the need for sequence redesign. The BOOST web application is available at https://boost.jgi.doe.gov and its Application Program Interfaces (API) enable integration into automated, customized DNA design processes. The herein presented results highlight the effectiveness of BOOST in reducing DNA synthesis costs and timelines.

29 CFR 4.118 - Contracts for carriage subject to published tariff rates.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true Contracts for carriage subject to published tariff rates. 4... subject to published tariff rates. The Act, in paragraph (3) of section 7, exempts from its provisions..., railway line or oil or gas pipeline where published tariff rates are in effect”. In order for this...

Achieving 50% Energy Savings in Office Buildings, Advanced Energy Design Guides: Office Buildings (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2014-09-01

This fact sheet summarizes recommendations for designing new office buildings that result in 50% less energy use than conventional designs meeting minimum code requirements. The recommendations are drawn from the Advanced Energy Design Guide for Small to Medium Office Buildings, an ASHRAE publication that provides comprehensive recommendations for designing low-energy-use office buildings with gross floor areas up to 100,000 ft2 (see sidebar). Designed as a stand-alone document, this fact sheet provides key principles and a set of prescriptive design recommendations appropriate for smaller office buildings with insufficient budgets to fully implement best practices for integrated design and optimized performance. Themore » recommendations have undergone a thorough analysis and review process through ASHRAE, and have been deemed the best combination of measures to achieve 50% savings in the greatest number of office buildings.« less

19 CFR 102.20 - Specific rules by tariff classification.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Specific rules by tariff classification. 102.20 Section 102.20 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY RULES OF ORIGIN Rules of Origin § 102.20 Specific rules by tariff classification. The following rules are the rules specified...

19 CFR 102.20 - Specific rules by tariff classification.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Specific rules by tariff classification. 102.20 Section 102.20 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY RULES OF ORIGIN Rules of Origin § 102.20 Specific rules by tariff classification. The following rules are the rules specified...

19 CFR 102.20 - Specific rules by tariff classification.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Specific rules by tariff classification. 102.20 Section 102.20 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY RULES OF ORIGIN Rules of Origin § 102.20 Specific rules by tariff classification. The following rules are the rules specified...

76 FR 60378 - Tariffs

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 61 Tariffs CFR Correction In Title 47 of the Code of Federal Regulations, Parts 40 to 69, revised as of October 1, 2010, on page 189, in Sec. 61.3, redesignate paragraphs (aa) through (zz) as paragraphs (bb) through (aaa), and reinstate old paragraph (z) as paragraph...

The difference between energy consumption and energy cost: Modelling energy tariff structures for water resource recovery facilities.

PubMed

Aymerich, I; Rieger, L; Sobhani, R; Rosso, D; Corominas, Ll

2015-09-15

The objective of this paper is to demonstrate the importance of incorporating more realistic energy cost models (based on current energy tariff structures) into existing water resource recovery facilities (WRRFs) process models when evaluating technologies and cost-saving control strategies. In this paper, we first introduce a systematic framework to model energy usage at WRRFs and a generalized structure to describe energy tariffs including the most common billing terms. Secondly, this paper introduces a detailed energy cost model based on a Spanish energy tariff structure coupled with a WRRF process model to evaluate several control strategies and provide insights into the selection of the contracted power structure. The results for a 1-year evaluation on a 115,000 population-equivalent WRRF showed monthly cost differences ranging from 7 to 30% when comparing the detailed energy cost model to an average energy price. The evaluation of different aeration control strategies also showed that using average energy prices and neglecting energy tariff structures may lead to biased conclusions when selecting operating strategies or comparing technologies or equipment. The proposed framework demonstrated that for cost minimization, control strategies should be paired with a specific optimal contracted power. Hence, the design of operational and control strategies must take into account the local energy tariff. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Design of Archives Buildings.

ERIC Educational Resources Information Center

Faye, Bernard

1982-01-01

Studies specific problems arising from design of archives buildings and examines three main purposes of this type of building, namely conservation, classification and restoration of archives, and the provision of access to them by administrators and research workers. Three references are listed. (Author/EJS)

Re-conceiving building design quality: A review of building users in their social context.

PubMed

Watson, Kelly J; Evans, James; Karvonen, Andrew; Whitley, Tim

2016-05-01

Considerable overlap exists between post-occupancy research evaluating building design quality and the concept of 'social value', popularised by its recent application to issues of the public realm. To outline this potential research agenda, the paper reviews design quality research on buildings in relation to users and their social context where the term 'social context' refers to building user group dynamics, a combination of organisational cultures, management strategies, and social norms and practices. The review is conducted across five key building types, namely housing, workplaces, healthcare, education, and the retail/service sector. Research commonalities and gaps are identified in order to build a more comprehensive picture of the design quality literature and its handling of users in their social context. The key findings concerning each building type are presented visually. It is concluded that the design quality field comprises a patchwork of relatively isolated studies of various building types, with significant potential for theoretical and empirical development through interdisciplinary collaboration. Users tend to be conceived as anonymous and autonomous individuals with little analysis of user identity or interaction. Further, the contextual impact of user group dynamics on the relationship between building design and building user is rarely addressed in the literature. Producing a more nuanced understanding of users in situ is proposed as an important area for future design quality research.

Re-conceiving building design quality: A review of building users in their social context

PubMed Central

Evans, James; Karvonen, Andrew; Whitley, Tim

2014-01-01

Considerable overlap exists between post-occupancy research evaluating building design quality and the concept of ‘social value’, popularised by its recent application to issues of the public realm. To outline this potential research agenda, the paper reviews design quality research on buildings in relation to users and their social context where the term ‘social context’ refers to building user group dynamics, a combination of organisational cultures, management strategies, and social norms and practices. The review is conducted across five key building types, namely housing, workplaces, healthcare, education, and the retail/service sector. Research commonalities and gaps are identified in order to build a more comprehensive picture of the design quality literature and its handling of users in their social context. The key findings concerning each building type are presented visually. It is concluded that the design quality field comprises a patchwork of relatively isolated studies of various building types, with significant potential for theoretical and empirical development through interdisciplinary collaboration. Users tend to be conceived as anonymous and autonomous individuals with little analysis of user identity or interaction. Further, the contextual impact of user group dynamics on the relationship between building design and building user is rarely addressed in the literature. Producing a more nuanced understanding of users in situ is proposed as an important area for future design quality research. PMID:27110217

Does the choice of tariff matter?: A comparison of EQ-5D-5L utility scores using Chinese, UK, and Japanese tariffs on patients with psoriasis vulgaris in Central South China.

PubMed

Zhao, Yue; Li, Shun-Ping; Liu, Liu; Zhang, Jiang-Lin; Chen, Gang

2017-08-01

There is an increasing trend globally to develop country-specific tariffs that can theoretically better reflect population's preferences on health states for preference-based health-related quality-of-life instruments, also known as multiattribute utility instruments. This study focused on the most recently developed 5-level version of EuroQol-5 Dimension (EQ-5D) questionnaire, 1 of the world's most well-known multiattribute utility instruments, and aimed to empirically explore the agreements and known-group validities of applying the country-specific tariff versus tariffs developed from other countries using a sample of psoriasis vulgaris patients in Mainland China.A convenience sampling framework was adopted to recruit patients diagnosed with psoriasis vulgaris from Xiangya Hospital, Central South University, China, between May 2014 and February 2015. The 5-level EuroQol-5 dimensions (EQ-5D-5L) utilities were scored by using the Chinese, Japanese, and UK tariffs. Health state utilities were compared using a range of nonparametric test. The intraclass correlation coefficients and Bland-Altman plots were used to examine the agreements among the 3 EQ-5D-5L scores. Health state utility decrements between known groups were investigated using both effect size and a regression analysis.In all, 350 patients (aged 16 years or older) were recruited. There were significant differences among the 3 national tariff sets. Overall, 3 tariffs showed excellent agreements (intraclass correlation coefficient >0.90); however, the wide limits of agreement from the Bland-Altman plots suggest that these tariffs cannot be used interchangeably. The EQ-5D-5L scores using the Chinese-specific tariff showed the best known-group validity than the other 2 tariffs in this Chinese patient sample. The evidence from this study supports the choice of the country-specific tariff to be used in Mainland China.

18 CFR 35.28 - Non-discriminatory open access transmission tariff.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Non-discriminatory open... AND TARIFFS Other Filing Requirements § 35.28 Non-discriminatory open access transmission tariff. (a... concerns regarding unnecessary market inefficiencies. (c) Non-discriminatory open access transmission...

19 CFR 10.521 - Goods eligible for tariff preference level claims.

Code of Federal Regulations, 2010 CFR

2010-04-01

... States-Singapore Free Trade Agreement Tariff Preference Level § 10.521 Goods eligible for tariff... assembled in Singapore from fabric or yarn produced or obtained outside the territory of Singapore or the...

14 CFR 221.122 - Special Tariff Permission to be used in its entirety as granted.

Code of Federal Regulations, 2010 CFR

2010-01-01

... extensive or different permission is desired, a new application for Special Tariff Permission conforming... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Special Tariff Permission to be used in its... TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Special Tariff Permission To File on Less Than...

Can the Computer Design a School Building?

ERIC Educational Resources Information Center

Roberts, Charles

The implications of computer technology and architecture are discussed with reference to school building design. A brief introduction is given of computer applications in other fields leading to the conclusions that computers alone cannot design school buildings but may serve as a useful tool in the overall design process. Specific examples are…

47 CFR 1.773 - Petitions for suspension or rejection of new tariff filings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... injury to the public arising from the unavailability of the service pursuant to the rates and conditions proposed in the tariff filing; (C) That irreparable injury will result if the tariff filing is not...; (C) That irreparable injury will result if the tariff filing is not suspended; and (D) That the...

Design and Build Approaches for Green Streets

EPA Pesticide Factsheets

This page serves to discuss the concept behind G3's innovative design build strategy. Design build offers a more comprehensive and streamlined approach to project construction and management compared to my traditional methods and is highly encouraged

14 CFR 399.40 - Tariffs for domestic air transportation on or after January 1, 1983.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Tariffs for domestic air transportation on... Relating to Rates and Tariffs § 399.40 Tariffs for domestic air transportation on or after January 1, 1983. The Board will not approve or accept any tariff filings for interstate of overseas air transportation...

7 CFR Appendices 1, 2 and 3 to... - Dairy Tariff-Rate Import Quota Licensing

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1, 2 and 3 to Subpart Agriculture Office of the Secretary of Agriculture IMPORT QUOTAS AND FEES... and 3 to Subpart—Dairy Tariff-Rate Import Quota Licensing Articles Subject to: Appendix 1, Historical Licenses; Appendix 2, Nonhistorical Licenses; and Appendix 3, Designated Importer Licenses for Quota Year...

18 CFR 154.208 - Service of tariff filings on customers and other parties.

Code of Federal Regulations, 2010 CFR

2010-04-01

... filings on customers and other parties. 154.208 Section 154.208 Conservation of Power and Water Resources... SCHEDULES AND TARIFFS Procedures for Changing Tariffs § 154.208 Service of tariff filings on customers and other parties. (a) On or before the filing date, the company must serve, upon all customers as of the...

Effect of non-tariff barriers on secondary processed wood product trade: New Zealand exports to the United States, China and Japan

Treesearch

James A. Turner; Joseph Buongiorno; Shushuai Zhu; Frances Maplesden

2008-01-01

Secondary processed wood products - builder's carpentry and joinery, moldings and millwork, wooden furniture, and prefabricated buildings - have grown significantly in importance in the global trade of wood products. At the same time there has been increased use of non-tariff barriers to restrict their trade.  These barriers could have an important impact on the...

The Impact of Utility Tariff Evolution on Behind-the-Meter PV Adoption

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Wesley J; Gagnon, Pieter J; Frew, Bethany A

This analysis uses a new method to link the NREL Regional Energy Deployment System (ReEDS) capacity expansion model with the NREL distributed generation market demand model (dGen) to explore the impact that the evolution of retail electricity tariffs can have on the adoption of distributed photovoltaics (DPV). The evolution most notably takes the form of decreased mid-day electricity costs, as low-cost PV reduces the marginal cost of electricity during those hours and the changes are subsequently communicated to electricity consumers through tariffs. We find that even under the low PV prices of the new SunShot targets the financial performance ofmore » DPV under evolved tariffs still motivates behind-the-meter adoption, despite significant reduction in the costs of electricity during afternoon periods driven by deployment of cheap utility-scale PV. The amount of DPV in 2050 in these low-cost futures ranged from 206 GW to 263 GW, a 13-fold and 16-fold increase over 2016 adoption levels respectively. From a utility planner's perspective, the representation of tariff evolution has noteworthy impacts on forecasted DPV adoption in scenarios with widespread time-of-use tariffs. Scenarios that projected adoption under a portfolio of time-of-use tariffs, but did not represent the evolution of those tariffs, predicted up to 36 percent more DPV in 2050, compared to scenarios that did not represent that evolution. Lastly, we find that a reduction in DPV deployment resulting from evolved tariffs had a negligible impact on the total generation from PV - both utility-scale and distributed - in the scenarios we examined. Any reduction in DPV generation was replaced with utility-scale PV generation, to arrive at the quantity that makes up the least-cost portfolio.« less

75 FR 12540 - Electronic Tariff Filings; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-16

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM01-5-000] Electronic... electronically starting April 1, 2010. One of the required electronic tariff filing's data elements is the Type of Filing Code. \\1\\ Electronic Tariff Filings, Order No. 714, 73 FR 57,515 (Oct. 3, 2008), 124 FERC...

78 FR 71724 - Recordations, Water Carrier Tariffs, and Agricultural Contract Summaries

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-29

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board Recordations, Water Carrier Tariffs, and Agricultural Contract Summaries AGENCY: Surface Transportation Board, DOT. ACTION: Notice of OMB Approval of..., Control Number 2140-0025 (2) Water Carrier Tariffs, Control Number 2140-26 (3) Agricultural Contract...

Alternative Natural Energy Sources in Building Design.

ERIC Educational Resources Information Center

Davis, Albert J.; Schubert, Robert P.

This publication provides a discussion of various energy conserving building systems and design alternatives. The information presented here covers alternative space and water heating systems, and energy conserving building designs incorporating these systems and other energy conserving techniques. Besides water, wind, solar, and bio conversion…

Affordability of residential water tariffs: alternative measurement and explanatory factors in southern Spain.

PubMed

García-Valiñas, Maria A; Martínez-Espiñeira, Roberto; González-Gómez, Francisco

2010-12-01

Using information on a basic or "lifeline" level of domestic water use obtained from a water demand function based on a Stone-Geary utility function, a minimum water threshold of 128 m(3) per household per year was estimated in a sample of municipalities in Southern Spain. As a second objective, water affordability indexes were then calculated that relate the cost of such lifeline to average municipal income levels. The analysis of the factors behind the differences in that ratio across Andalusian municipalities shows that the relative cost of purchasing the lifeline appears inversely related to average income levels, revealing an element of regressivity in the component of water tariffs affecting the least superfluous part of the household's consumption. The main policy recommendation would involve redesigning water tariffs in order to improve access for lower income households to an amount of water sufficient to cover their basic needs. The proposed methodology could be applied to other geographical areas, both from developed and from developing countries, in order to analyze the degree of progressivity of the water tariffs currently in effect and in order to guide the design of more equitable regulatory policies. Copyright © 2010 Elsevier Ltd. All rights reserved.

Principles of Good School Building Design. School Buildings Planning, Design, and Construction Series No. 3.

ERIC Educational Resources Information Center

Odell, John H.

A school construction guide offers key personnel in school development projects information on the complex task of master planning and construction of schools in Australia. This chapter of the guide provides advice on school building design issues, such as the fundamentals of good design and designs that accommodate change, issues affecting…

Building Better: Advanced Energy Design Guides - Continuum Magazine |

Science.gov Websites

NREL Building Better: Advanced Energy Design Guides Building Better: Advanced Energy Design Greensburg be constructed to meet Leadership in Energy and Environmental Design (LEED) Platinum ratings from design needs to incorporate a number of recommendations for achieving energy savings over the minimum

78 FR 13011 - Non-Vessel-Operating Common Carrier Negotiated Rate Arrangements; Tariff Publication Exemption

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... 11353. There were also concerns about the lack of oversight of foreign-based unlicensed NVOCCs. Id. at... request. All records produced must be in English or be accompanied by a certified English translation... agent is designated in the tariff, that it has no knowledge of the identity of the ocean transportation...

A Facilities Manager's Guide to Green Building Design.

ERIC Educational Resources Information Center

Simpson, Walter

2001-01-01

Explains how the "green building" approach to educational facilities design creates healthy, naturally lit, attractive buildings with lower operating and life cycle costs. Tips on getting started on a green design and overcoming the barriers to the green design concept are discussed. (GR)

Multi-Criteria Approach in Multifunctional Building Design Process

NASA Astrophysics Data System (ADS)

Gerigk, Mateusz

2017-10-01

The paper presents new approach in multifunctional building design process. Publication defines problems related to the design of complex multifunctional buildings. Currently, contemporary urban areas are characterized by very intensive use of space. Today, buildings are being built bigger and contain more diverse functions to meet the needs of a large number of users in one capacity. The trends show the need for recognition of design objects in an organized structure, which must meet current design criteria. The design process in terms of the complex system is a theoretical model, which is the basis for optimization solutions for the entire life cycle of the building. From the concept phase through exploitation phase to disposal phase multipurpose spaces should guarantee aesthetics, functionality, system efficiency, system safety and environmental protection in the best possible way. The result of the analysis of the design process is presented as a theoretical model of the multifunctional structure. Recognition of multi-criteria model in the form of Cartesian product allows to create a holistic representation of the designed building in the form of a graph model. The proposed network is the theoretical base that can be used in the design process of complex engineering systems. The systematic multi-criteria approach makes possible to maintain control over the entire design process and to provide the best possible performance. With respect to current design requirements, there are no established design rules for multifunctional buildings in relation to their operating phase. Enrichment of the basic criteria with functional flexibility criterion makes it possible to extend the exploitation phase which brings advantages on many levels.

18 CFR 385.215 - Amendment of pleadings and tariff or rate filings (Rule 215).

Code of Federal Regulations, 2010 CFR

2010-04-01

... under subpart E, a written amendment is filed after the time for filing provided under paragraph (a)(3... and tariff or rate filings (Rule 215). 385.215 Section 385.215 Conservation of Power and Water... PROCEDURE Pleadings, Tariff and Rate Filings, Notices of Tariff or Rate Examination, Orders To Show Cause...

22 CFR 91.3 - Assistance to Customs and Tariff Commission representatives.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Assistance to Customs and Tariff Commission representatives. 91.3 Section 91.3 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES IMPORT CONTROLS § 91.3 Assistance to Customs and Tariff Commission representatives. Consular officers shall render...

Design and development of Building energy simulation Software for prefabricated cabin type of industrial building (PCES)

NASA Astrophysics Data System (ADS)

Zhang, Jun; Li, Ri Yi

2018-06-01

Building energy simulation is an important supporting tool for green building design and building energy consumption assessment, At present, Building energy simulation software can't meet the needs of energy consumption analysis and cabinet level micro environment control design of prefabricated building. thermal physical model of prefabricated building is proposed in this paper, based on the physical model, the energy consumption calculation software of prefabricated cabin building(PCES) is developed. we can achieve building parameter setting, energy consumption simulation and building thermal process and energy consumption analysis by PCES.

Optimizing Energy Consumption in Building Designs Using Building Information Model (BIM)

NASA Astrophysics Data System (ADS)

Egwunatum, Samuel; Joseph-Akwara, Esther; Akaigwe, Richard

2016-09-01

Given the ability of a Building Information Model (BIM) to serve as a multi-disciplinary data repository, this paper seeks to explore and exploit the sustainability value of Building Information Modelling/models in delivering buildings that require less energy for their operation, emit less CO2 and at the same time provide a comfortable living environment for their occupants. This objective was achieved by a critical and extensive review of the literature covering: (1) building energy consumption, (2) building energy performance and analysis, and (3) building information modeling and energy assessment. The literature cited in this paper showed that linking an energy analysis tool with a BIM model helped project design teams to predict and create optimized energy consumption. To validate this finding, an in-depth analysis was carried out on a completed BIM integrated construction project using the Arboleda Project in the Dominican Republic. The findings showed that the BIM-based energy analysis helped the design team achieve the world's first 103% positive energy building. From the research findings, the paper concludes that linking an energy analysis tool with a BIM model helps to expedite the energy analysis process, provide more detailed and accurate results as well as deliver energy-efficient buildings. The study further recommends that the adoption of a level 2 BIM and the integration of BIM in energy optimization analyse should be made compulsory for all projects irrespective of the method of procurement (government-funded or otherwise) or its size.

Los Angeles Tall Buildings Structural Design Council

Science.gov Websites

Los Angeles Tall Buildings Structural Design Council Home News Archives Members Mailing Address LATBSDC c/o John A. Martin & Associates 950 South Grand Ave 4th Floor Los Angeles, CA 90015, USA Phone (213) 483-6490 Fax (213) 483-3084 Welcome Welcome to the Los Angeles Tall Buildings Structural Design

Algorithmic design for 3D printing at building scale

DOE PAGES

Guerguis, Maged; Eikevik, Leif; Obendorf, Andrew; ...

2017-01-01

Here, this paper addresses the use of algorithmic design paired with additive manufacturing and their potential impact on architectural design and fabrication of a full-sized building, as demonstrated with the AMIE project. AMIE (Additive Manufacturing and Integrated Energy) was collaboration to 3d print a building and vehicle. Both the car and building were designed to generate, store and share energy in an effort to reduce or eliminate reliability on the power grid. This paper is intended to outline our methodology in successfully designing for these innovative strategies, with a focus on the use of computational design tools as a catalystmore » for design optimization, integrated project delivery, rapid prototyping and fabrication of building elements using additive manufacturing.« less

Algorithmic design for 3D printing at building scale

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guerguis, Maged; Eikevik, Leif; Obendorf, Andrew

Here, this paper addresses the use of algorithmic design paired with additive manufacturing and their potential impact on architectural design and fabrication of a full-sized building, as demonstrated with the AMIE project. AMIE (Additive Manufacturing and Integrated Energy) was collaboration to 3d print a building and vehicle. Both the car and building were designed to generate, store and share energy in an effort to reduce or eliminate reliability on the power grid. This paper is intended to outline our methodology in successfully designing for these innovative strategies, with a focus on the use of computational design tools as a catalystmore » for design optimization, integrated project delivery, rapid prototyping and fabrication of building elements using additive manufacturing.« less

Development and validation of a building design waste reduction model.

PubMed

Llatas, C; Osmani, M

2016-10-01

Reduction in construction waste is a pressing need in many countries. The design of building elements is considered a pivotal process to achieve waste reduction at source, which enables an informed prediction of their wastage reduction levels. However the lack of quantitative methods linking design strategies to waste reduction hinders designing out waste practice in building projects. Therefore, this paper addresses this knowledge gap through the design and validation of a Building Design Waste Reduction Strategies (Waste ReSt) model that aims to investigate the relationships between design variables and their impact on onsite waste reduction. The Waste ReSt model was validated in a real-world case study involving 20 residential buildings in Spain. The validation process comprises three stages. Firstly, design waste causes were analyzed. Secondly, design strategies were applied leading to several alternative low waste building elements. Finally, their potential source reduction levels were quantified and discussed within the context of the literature. The Waste ReSt model could serve as an instrumental tool to simulate designing out strategies in building projects. The knowledge provided by the model could help project stakeholders to better understand the correlation between the design process and waste sources and subsequently implement design practices for low-waste buildings. Copyright © 2016 Elsevier Ltd. All rights reserved.

49 CFR 1312.2 - Requirement to publish and file a tariff.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Requirement to publish and file a tariff. 1312.2... CARRIER IN NONCONTIGUOUS DOMESTIC TRADE § 1312.2 Requirement to publish and file a tariff. (a) Requirement... rates, and related rules and practices, for such transportation or service are contained in a published...

19 CFR 10.606 - Filing of claim for tariff preference level.

Code of Federal Regulations, 2010 CFR

2010-04-01

...-Central America-United States Free Trade Agreement Tariff Preference Level § 10.606 Filing of claim for... 19 Customs Duties 1 2010-04-01 2010-04-01 false Filing of claim for tariff preference level. 10.606 Section 10.606 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY...

Early Design Energy Analysis Using Building Information Modeling Technology

DTIC Science & Technology

2011-11-01

building, (a) floor plan and (b) 3D image. ....................................... 50 Figure 28. Comparison of different energy estimates...when they make the biggest impact on building life-cycle costs. Traditionally, most building energy analyses have been conducted late in design, by...complete energy analysis. This method enables project teams to make energy conscious decisions early in design when they impact building life-cycle

Application of BIM Technology in Building Water Supply and Drainage Design

NASA Astrophysics Data System (ADS)

Wei, Tianyun; Chen, Guiqing; Wang, Junde

2017-12-01

Through the application of BIM technology, the idea of building water supply and drainage designers can be related to the model, the various influencing factors to affect water supply and drainage design can be considered more comprehensively. BIM(Building information model) technology assist in improving the design process of building water supply and drainage, promoting the building water supply and drainage planning, enriching the building water supply and drainage design method, improving the water supply and drainage system design level and building quality. Combined with fuzzy comprehensive evaluation method to analyze the advantages of BIM technology in building water supply and drainage design. Therefore, application prospects of BIM technology are very worthy of promotion.

Building Ecology & School Design. Technical Bulletin.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore.

To better understand construction's impact, an overview of building ecology as a concept and as a decision-making model for school systems is provided. "Building ecology" is defined as the interrelationships among people, the built environment, and the natural environment. It has special relevance for school design because most of the…

Design of an energy conservation building

NASA Astrophysics Data System (ADS)

Jensen, R. N.

1981-11-01

The concepts in designing and predicting energy consumption in a low energy use building are summarized. The building will use less than 30,000 Btu/sq.ft./yr. of boarder energy. The building's primary energy conservation features include heavy concrete walls with external insulation, a highly insulated ceiling, and large amounts of glass for natural lighting. A solar collector air system is integrated into the south wall. Calculations for energy conservation features were performed using NASA's NECAP Energy Program.

Design of an energy conservation building

NASA Technical Reports Server (NTRS)

Jensen, R. N.

1981-01-01

The concepts in designing and predicting energy consumption in a low energy use building are summarized. The building will use less than 30,000 Btu/sq.ft./yr. of boarder energy. The building's primary energy conservation features include heavy concrete walls with external insulation, a highly insulated ceiling, and large amounts of glass for natural lighting. A solar collector air system is integrated into the south wall. Calculations for energy conservation features were performed using NASA's NECAP Energy Program.

19 CFR 10.520 - Filing of claim for tariff preference level.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... A cotton or man-made fiber apparel good described in § 10.521 of this subpart that does not qualify... tariff treatment under the SFTA under an applicable tariff preference level (TPL). To make a TPL claim... Chapter 61 or 62 of the HTSUS under which each non-originating cotton or man-made fiber apparel good is...

19 CFR 10.420 - Filing of claim for tariff preference level.

Code of Federal Regulations, 2010 CFR

2010-04-01

... cotton or man-made fiber fabric or apparel good described in § 10.421 of this subpart that does not... tariff treatment under the US-CFTA under an applicable tariff preference level (TPL). To make a TPL claim... subheading in Chapter 52 through 62 of the HTSUS under which each non-originating cotton or man-made fiber...

District Heating Systems Performance Analyses. Heat Energy Tariff

NASA Astrophysics Data System (ADS)

Ziemele, Jelena; Vigants, Girts; Vitolins, Valdis; Blumberga, Dagnija; Veidenbergs, Ivars

2014-12-01

The paper addresses an important element of the European energy sector: the evaluation of district heating (DH) system operations from the standpoint of increasing energy efficiency and increasing the use of renewable energy resources. This has been done by developing a new methodology for the evaluation of the heat tariff. The paper presents an algorithm of this methodology, which includes not only a data base and calculation equation systems, but also an integrated multi-criteria analysis module using MADM/MCDM (Multi-Attribute Decision Making / Multi-Criteria Decision Making) based on TOPSIS (Technique for Order Performance by Similarity to Ideal Solution). The results of the multi-criteria analysis are used to set the tariff benchmarks. The evaluation methodology has been tested for Latvian heat tariffs, and the obtained results show that only half of heating companies reach a benchmark value equal to 0.5 for the efficiency closeness to the ideal solution indicator. This means that the proposed evaluation methodology would not only allow companies to determine how they perform with regard to the proposed benchmark, but also to identify their need to restructure so that they may reach the level of a low-carbon business.

Encouraging vehicle-to-grid (V2G) participation through premium tariff rates

NASA Astrophysics Data System (ADS)

Richardson, David B.

2013-12-01

The provision of vehicle-to-grid (V2G) services to an electric grid by electric vehicles (EVs) can potentially reduce the cost of vehicle ownership through revenue generation. Recent studies indicate that yearly vehicle profit from V2G may not be sufficient to induce widespread participation. This paper investigates the feasibility of a premium tariff rate for V2G power, similar to current feed-in-tariff (FIT) programs for renewable energy. Using Ontario, Canada as a case study, an hourly time-series model for a fleet of commuter EVs is created. Tariff rates for V2G peak power are calculated based on the same return on investment as the current FIT for renewable energy in Ontario. The tariff rates are competitive with the renewable energy tariffs, especially when EVs are allowed to provide ancillary services to the grid in addition to peak power. Despite the guaranteed rate of return, yearly vehicle profit is low. Two variations are considered to increase vehicle profit, thereby enhancing the attractiveness of V2G. A higher return on investment is favored over direct benefits offered to EV owners. A higher return on investment may be justifiable based on the higher level of risk inherent in V2G when compared to renewable energy.

The Influence of Building Codes on Recreation Facility Design.

ERIC Educational Resources Information Center

Morrison, Thomas A.

1989-01-01

Implications of building codes upon design and construction of recreation facilities are investigated (national building codes, recreation facility standards, and misperceptions of design requirements). Recreation professionals can influence architectural designers to correct past deficiencies, but they must understand architectural and…

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

Design-Build vs Design-Bid-Build: A Procurement Method Selection Framework

DTIC Science & Technology

2006-08-01

Kumaraswamy and Dissanayaka [16,17], Molenaar [12], Love, Skitmore, and Earl [3], and Konchar and Sanvido [ 13]. Kumaraswamy and Dissanayaka explored the...measuring 11 performance areas [ 16, 17]. Love, Skitmore, and Earl used expert surveys to poll attitudes toward different delivery options [3], while Molenaar ... Molenaar , Keith R., and Robinson, Graham D., Selection Factors and Success Criteria for Design-Build in the U.S. and U.K., University of Colorado, 1997

22 CFR 91.1 - Answering inquiries regarding tariff acts and customs regulations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... customs regulations. 91.1 Section 91.1 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES IMPORT CONTROLS § 91.1 Answering inquiries regarding tariff acts and customs regulations. In replying to inquiries received from exporters, travelers, or other interested parties, concerning tariff acts or customs...

22 CFR 91.1 - Answering inquiries regarding tariff acts and customs regulations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... customs regulations. 91.1 Section 91.1 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES IMPORT CONTROLS § 91.1 Answering inquiries regarding tariff acts and customs regulations. In replying to inquiries received from exporters, travelers, or other interested parties, concerning tariff acts or customs...

22 CFR 91.1 - Answering inquiries regarding tariff acts and customs regulations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... customs regulations. 91.1 Section 91.1 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES IMPORT CONTROLS § 91.1 Answering inquiries regarding tariff acts and customs regulations. In replying to inquiries received from exporters, travelers, or other interested parties, concerning tariff acts or customs...

22 CFR 91.1 - Answering inquiries regarding tariff acts and customs regulations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... customs regulations. 91.1 Section 91.1 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES IMPORT CONTROLS § 91.1 Answering inquiries regarding tariff acts and customs regulations. In replying to inquiries received from exporters, travelers, or other interested parties, concerning tariff acts or customs...

22 CFR 91.1 - Answering inquiries regarding tariff acts and customs regulations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... customs regulations. 91.1 Section 91.1 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES IMPORT CONTROLS § 91.1 Answering inquiries regarding tariff acts and customs regulations. In replying to inquiries received from exporters, travelers, or other interested parties, concerning tariff acts or customs...

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Two-phase design-build... for Leasehold Interests in Real Property 570.305 Two-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if you use the two-phase design-build...

75 FR 4689 - Electronic Tariff Filings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

... collaborative process relies upon the use of metadata (or information) about the tariff filing, including such... code.\\5\\ Because the Commission is using the electronic metadata to establish statutory action dates... code, as well as accurately providing any other metadata. 6. Similarly, the Commission will be using...

49 CFR 1312.10 - Notification of tariff changes and nature of changes.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 9 2014-10-01 2014-10-01 false Notification of tariff changes and nature of... WATER CARRIER IN NONCONTIGUOUS DOMESTIC TRADE § 1312.10 Notification of tariff changes and nature of... changes and their nature (whether an increase or decrease in service, rates or transportation charges). ...

49 CFR 1312.10 - Notification of tariff changes and nature of changes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 9 2011-10-01 2011-10-01 false Notification of tariff changes and nature of... WATER CARRIER IN NONCONTIGUOUS DOMESTIC TRADE § 1312.10 Notification of tariff changes and nature of... changes and their nature (whether an increase or decrease in service, rates or transportation charges). ...

49 CFR 1312.10 - Notification of tariff changes and nature of changes.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 9 2013-10-01 2013-10-01 false Notification of tariff changes and nature of... WATER CARRIER IN NONCONTIGUOUS DOMESTIC TRADE § 1312.10 Notification of tariff changes and nature of... changes and their nature (whether an increase or decrease in service, rates or transportation charges). ...

49 CFR 1312.10 - Notification of tariff changes and nature of changes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Notification of tariff changes and nature of... WATER CARRIER IN NONCONTIGUOUS DOMESTIC TRADE § 1312.10 Notification of tariff changes and nature of... changes and their nature (whether an increase or decrease in service, rates or transportation charges). ...

49 CFR 1312.10 - Notification of tariff changes and nature of changes.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 9 2012-10-01 2012-10-01 false Notification of tariff changes and nature of... WATER CARRIER IN NONCONTIGUOUS DOMESTIC TRADE § 1312.10 Notification of tariff changes and nature of... changes and their nature (whether an increase or decrease in service, rates or transportation charges). ...

SAFETY IN THE DESIGN OF SCIENCE LABORATORIES AND BUILDING CODES.

ERIC Educational Resources Information Center

HOROWITZ, HAROLD

THE DESIGN OF COLLEGE AND UNIVERSITY BUILDINGS USED FOR SCIENTIFIC RESEARCH AND EDUCATION IS DISCUSSED IN TERMS OF LABORATORY SAFETY AND BUILDING CODES AND REGULATIONS. MAJOR TOPIC AREAS ARE--(1) SAFETY RELATED DESIGN FEATURES OF SCIENCE LABORATORIES, (2) LABORATORY SAFETY AND BUILDING CODES, AND (3) EVIDENCE OF UNSAFE DESIGN. EXAMPLES EMPHASIZE…

76 FR 46267 - Increase in Fiscal Year 2011 Specialty Sugar Tariff-Rate Quota; Determination of Total Amounts of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-02

... Tariff-Rate Quota; Determination of Total Amounts of Fiscal Year 2012 Tariff-Rate Quotas for Raw Cane... Raw Sugar Tariff- Rate Quota AGENCY: Office of the Secretary, USDA. ACTION: Notice. SUMMARY: The... year (FY) 2011 specialty sugar tariff-rate quota (TRQ) of 9,072 metric tons raw value (MTRV). The...

46 CFR 520.10 - Integrity of tariffs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... such information is superseded, canceled or withdrawn, and shall provide on-line access to such data... specific date for the retrieval of tariff data, so that only data in effect on that date would be directly...

46 CFR 520.10 - Integrity of tariffs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... such information is superseded, canceled or withdrawn, and shall provide on-line access to such data... specific date for the retrieval of tariff data, so that only data in effect on that date would be directly...

46 CFR 520.10 - Integrity of tariffs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... such information is superseded, canceled or withdrawn, and shall provide on-line access to such data... specific date for the retrieval of tariff data, so that only data in effect on that date would be directly...

46 CFR 520.10 - Integrity of tariffs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... such information is superseded, canceled or withdrawn, and shall provide on-line access to such data... specific date for the retrieval of tariff data, so that only data in effect on that date would be directly...

75 FR 53271 - Assessment of Fees for Dairy Import Licenses for the 2011 Tariff-Rate Import Quota Year

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-31

... Service Assessment of Fees for Dairy Import Licenses for the 2011 Tariff- Rate Import Quota Year AGENCY... charged for the 2011 tariff-rate quota (TRQ) year for each license issued to a person or firm by the U.S... tariff-rate quotas set forth in the Harmonized Tariff Schedule (HTS) of the United States. DATES...

77 FR 24759 - Implementation of United States-Colombia Trade Promotion Agreement Tariff-Rate Quota for Imports...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

... Promotion Agreement Tariff-Rate Quota for Imports of Sugar AGENCY: Office of the United States Trade Representative. ACTION: Notice. SUMMARY: USTR is providing notice that the tariff-rate quota for sugar... Agreement establishes a tariff-rate quota for imports of sugar from Colombia. USTR is providing notice that...

Demographic and socio-economic associations with academic attainment (UCAS tariff scores) in applicants to medical school.

PubMed

Powis, David; James, David; Ferguson, Eamonn

2007-03-01

In the United Kingdom medical students are selected predominantly on their academic merit. Their academic achievement marks are equated via the tariff point score structure administered by the Universities and Colleges Admissions Service (UCAS). We studied the applicant databases for 1998-2003 for one English medical school to determine the factors that predict high tariff point scores. Complete demographic data and relative socio-economic status, educational institution attended and tariff point score was available for 8997 UK applicants aged 21 years or younger to the 5-year Bachelor of Medicine/Bachelor of Surgery (BM BS) course at Nottingham University medical school (and partially complete data for a further 1891 applicants). The data were subjected to standard univariate and multivariate analyses and to path analysis. In these samples, the independent predictors of a high tariff point score were being younger and male. The effect sizes were small, although significant. Higher tariff point scores were achieved by those from households less materially disadvantaged. Ethnicity was also a predictor with white, Chinese and those of mixed ethnic origin achieving higher tariff point scores than those from other groups. Finally, the type of school attended predicted academic achievement with applicants from further education colleges, independent schools and grant-maintained schools achieving higher tariff point scores. Notwithstanding the relatively homogeneous (predominantly young, white, high academic achievers) applicant pool to a single UK medical school we identified consistent significant predictors of high tariff point scores. As high tariff point scores are still the major entry criterion to UK medical schools, our findings will be of value in informing policy decisions concerning 'widening access' schemes being established at government request.

Renewable Energy Prices in State-Level Feed-in Tariffs: Federal Law Constraints and Possible Solutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hempling, S.; Elefant, C.; Cory, K.

State legislatures and state utility commissions trying to attract renewable energy projects are considering feed-in tariffs, which obligate retail utilities to purchase electricity from renewable producers under standard arrangements specifying prices, terms, and conditions. The use of feed-in tariffs simplifies the purchase process, provides revenue certainty to generators, and reduces the cost of financing generating projects. However, some argue that federal law--including the Public Utility Regulatory Policies Act of 1978 (PURPA) and the Federal Power Act of 1935 (FPA)--constrain state-level feed-in tariffs. This report seeks to reduce the legal uncertainties for states contemplating feed-in tariffs by explaining the constraints imposedmore » by federal statutes. It describes the federal constraints, identifies transaction categories that are free of those constraints, and offers ways for state and federal policymakers to interpret or modify existing law to remove or reduce these constraints. This report proposes ways to revise these federal statutes. It creates a broad working definition of a state-level feed-in tariff. Given this definition, this report concludes there are paths to non-preempted, state-level feed-in tariffs under current federal law.« less

An Optimization and Assessment on DG adoption in JapanesePrototype Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Marnay, Chris; Firestone, Ryan

2005-11-30

This research investigates a method of choosing economicallyoptimal DER, expanding on prior studies at the Berkeley Lab using the DERdesign optimization program, the Distributed Energy Resources CustomerAdoption Model (DER-CAM). DER-CAM finds the optimal combination ofinstalled equipment from available DER technologies, given prevailingutility tariffs, site electrical and thermal loads, and a menu ofavailable equipment. It provides a global optimization, albeit idealized,that shows how the site energy load scan be served at minimum cost byselection and operation of on-site generation, heat recovery, andcooling. Five prototype Japanese commercial buildings are examined andDER-CAM applied to select thee conomically optimal DER system for each.The fivemore » building types are office, hospital, hotel, retail, and sportsfacility. Based on the optimization results, energy and emissionreductions are evaluated. Furthermore, a Japan-U.S. comparison study ofpolicy, technology, and utility tariffs relevant to DER installation ispresented. Significant decreases in fuel consumption, carbon emissions,and energy costs were seen in the DER-CAM results. Savings were mostnoticeable in the sports facility, followed by the hospital, hotel, andoffice building.« less

40 CFR 35.2036 - Design/build project grants.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Design/build project grants. 35.2036 Section 35.2036 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works § 35.2036 Design/build project grants. (a) Terms and conditions. The...

1. GENERAL OFFICE BUILDING FOR THE HOMESTEAD WORKS, DESIGNED BY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL OFFICE BUILDING FOR THE HOMESTEAD WORKS, DESIGNED BY HOFFMAN & CRUMPTON OF PITTSBURGH. THE BUILDING WAS DESIGNED TO SHOWCASE THE ARCHITECTURAL POSSIBILITIES OF STEEL. - U.S. Steel Homestead Works, Auxiliary Buildings & Shops, Along Monongahela River, Homestead, Allegheny County, PA

Modelling altered revenue function based on varying power consumption distribution and electricity tariff charge using data analytics framework

NASA Astrophysics Data System (ADS)

Zainudin, W. N. R. A.; Ramli, N. A.

2017-09-01

In 2010, Energy Commission (EC) had introduced Incentive Based Regulation (IBR) to ensure sustainable Malaysian Electricity Supply Industry (MESI), promotes transparent and fair returns, encourage maximum efficiency and maintains policy driven end user tariff. To cater such revolutionary transformation, a sophisticated system to generate policy driven electricity tariff structure is in great need. Hence, this study presents a data analytics framework that generates altered revenue function based on varying power consumption distribution and tariff charge function. For the purpose of this study, the power consumption distribution is being proxy using proportion of household consumption and electricity consumed in KwH and the tariff charge function is being proxy using three-tiered increasing block tariff (IBT). The altered revenue function is useful to give an indication on whether any changes in the power consumption distribution and tariff charges will give positive or negative impact to the economy. The methodology used for this framework begins by defining the revenue to be a function of power consumption distribution and tariff charge function. Then, the proportion of household consumption and tariff charge function is derived within certain interval of electricity power. Any changes in those proportion are conjectured to contribute towards changes in revenue function. Thus, these changes can potentially give an indication on whether the changes in power consumption distribution and tariff charge function are giving positive or negative impact on TNB revenue. Based on the finding of this study, major changes on tariff charge function seems to affect altered revenue function more than power consumption distribution. However, the paper concludes that power consumption distribution and tariff charge function can influence TNB revenue to some great extent.

18 CFR 341.11 - Rejection of tariff publications and other filed materials.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Rejection of tariff publications and other filed materials. 341.11 Section 341.11 Conservation of Power and Water Resources FEDERAL... publication that has been rejected may not be used again. The tariff publication filed in its place must bear...

18 CFR 341.11 - Rejection of tariff publications and other filed materials.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Rejection of tariff publications and other filed materials. 341.11 Section 341.11 Conservation of Power and Water Resources FEDERAL... publication that has been rejected may not be used again. The tariff publication filed in its place must bear...

18 CFR 341.11 - Rejection of tariff publications and other filed materials.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Rejection of tariff publications and other filed materials. 341.11 Section 341.11 Conservation of Power and Water Resources FEDERAL... publication that has been rejected may not be used again. The tariff publication filed in its place must bear...

18 CFR 341.11 - Rejection of tariff publications and other filed materials.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Rejection of tariff publications and other filed materials. 341.11 Section 341.11 Conservation of Power and Water Resources FEDERAL... publication that has been rejected may not be used again. The tariff publication filed in its place must bear...

Comparison of Design-Build to Design-Bid-Build as a Project Delivery Method

DTIC Science & Technology

2001-12-01

by Researcher] 40 Time growth is generally coupled with cost growth, and this rule holds true when looking at the cost growth on the DB and DBB...and Tierno, M., “Points to Remember,” The Military Engineer, No. 609, pp. 25-26, January-February 2001. 4. Crammer , Mark, “Design-Build in the

Comparison of Design-Build to Design-Bid Build as a Project Delivery Method

DTIC Science & Technology

2001-12-01

Time growth is generally coupled with cost growth, and this rule holds true when looking at the cost growth on the DB and DBB projects and similarly...to Remember,” The Military Engineer, No. 609, pp. 25-26, January-February 2001. 4. Crammer , Mark, “Design-Build in the Corps of Engineers, A work

A novel methodology for building robust design rules by using design based metrology (DBM)

NASA Astrophysics Data System (ADS)

Lee, Myeongdong; Choi, Seiryung; Choi, Jinwoo; Kim, Jeahyun; Sung, Hyunju; Yeo, Hyunyoung; Shim, Myoungseob; Jin, Gyoyoung; Chung, Eunseung; Roh, Yonghan

2013-03-01

This paper addresses a methodology for building robust design rules by using design based metrology (DBM). Conventional method for building design rules has been using a simulation tool and a simple pattern spider mask. At the early stage of the device, the estimation of simulation tool is poor. And the evaluation of the simple pattern spider mask is rather subjective because it depends on the experiential judgment of an engineer. In this work, we designed a huge number of pattern situations including various 1D and 2D design structures. In order to overcome the difficulties of inspecting many types of patterns, we introduced Design Based Metrology (DBM) of Nano Geometry Research, Inc. And those mass patterns could be inspected at a fast speed with DBM. We also carried out quantitative analysis on PWQ silicon data to estimate process variability. Our methodology demonstrates high speed and accuracy for building design rules. All of test patterns were inspected within a few hours. Mass silicon data were handled with not personal decision but statistical processing. From the results, robust design rules are successfully verified and extracted. Finally we found out that our methodology is appropriate for building robust design rules.

Sampling design for the 1980 commercial and multifamily residential building survey

NASA Astrophysics Data System (ADS)

Bowen, W. M.; Olsen, A. R.; Nieves, A. L.

1981-06-01

The extent to which new building design practices comply with the proposed 1980 energy budget levels for commercial and multifamily residential building designs (DEB-80) can be assessed by: (1) identifying small number of building types which account for the majority of commercial buildings constructed in the U.S.A.; (2) conducting a separate survey for each building type; and (3) including only buildings designed during 1980. For each building, the design energy consumption (DEC-80) will be determined by the DOE2.1 computer program. The quantity X = (DEC-80 - DEB-80). These X quantities can then be used to compute sample statistics. Inferences about nationwide compliance with DEB-80 may then be made for each building type. Details of the population, sampling frame, stratification, sample size, and implementation of the sampling plan are provided.

Resilient design in the conservation of Johar market heritage building

NASA Astrophysics Data System (ADS)

Roesmanto, Totok

2017-12-01

Johar Market building based on Law of Repubic of Indonesia No.11 of 2010 is a heritage building. It was built in 1936 located near traditional square of Pasebaan and Aloon- Aloon was built by Dutch merchants union in 1678. Semarang based on decentralized policy by the Dutch Government in 1906 became a trading city. Rapid development of trading activities has caused the city planning policy by Semarang Government since 1970 made Aloon-Aloon become market buildings. Johar Market and market buildings in surrounding were on fire in 2015. Basing on Law No.11 of 2010 Semarang Government plans to conserve Johar Market heritage building and reconstruct Aloon-Aloon based on proposal of Roesmanto in 2016. The architect bureau assigned by the Semarang Government designed a new building in the middle of South-Johar Market to accommodate Johar merchants. This study aims to evaluate the design of new building by the architect bureau considering that since 2012 the city of Semarang including earthquake prone areas. The revitalization of Johar Market should use resilient design in order to prevent future damages to heritage buildings located nearby and new building must be spaced sufficiently against surrounding heritage buildings. This research uses descriptive qualitative method base on the field data after Johar Market burned and design planned bureau architect. The results of this study found that the distance between new building and heritage building is less wide.

Energy-Performance-Based Design-Build Process: Strategies for Procuring High-Performance Buildings on Typical Construction Budgets: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scheib, J.; Pless, S.; Torcellini, P.

NREL experienced a significant increase in employees and facilities on our 327-acre main campus in Golden, Colorado over the past five years. To support this growth, researchers developed and demonstrated a new building acquisition method that successfully integrates energy efficiency requirements into the design-build requests for proposals and contracts. We piloted this energy performance based design-build process with our first new construction project in 2008. We have since replicated and evolved the process for large office buildings, a smart grid research laboratory, a supercomputer, a parking structure, and a cafeteria. Each project incorporated aggressive efficiency strategies using contractual energy usemore » requirements in the design-build contracts, all on typical construction budgets. We have found that when energy efficiency is a core project requirement as defined at the beginning of a project, innovative design-build teams can integrate the most cost effective and high performance efficiency strategies on typical construction budgets. When the design-build contract includes measurable energy requirements and is set up to incentivize design-build teams to focus on achieving high performance in actual operations, owners can now expect their facilities to perform. As NREL completed the new construction in 2013, we have documented our best practices in training materials and a how-to guide so that other owners and owner's representatives can replicate our successes and learn from our experiences in attaining market viable, world-class energy performance in the built environment.« less

14 CFR 221.112 - Rejected tariff is void and must not be used.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Rejected tariff is void and must not be used. 221.112 Section 221.112 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... any force or effect whatsoever. Such rejected tariff must not be used. ...

14 CFR 221.112 - Rejected tariff is void and must not be used.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Rejected tariff is void and must not be used. 221.112 Section 221.112 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... any force or effect whatsoever. Such rejected tariff must not be used. ...

14 CFR 221.112 - Rejected tariff is void and must not be used.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Rejected tariff is void and must not be used. 221.112 Section 221.112 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... any force or effect whatsoever. Such rejected tariff must not be used. ...

14 CFR 221.112 - Rejected tariff is void and must not be used.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Rejected tariff is void and must not be used. 221.112 Section 221.112 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... any force or effect whatsoever. Such rejected tariff must not be used. ...

14 CFR 221.112 - Rejected tariff is void and must not be used.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Rejected tariff is void and must not be used. 221.112 Section 221.112 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... any force or effect whatsoever. Such rejected tariff must not be used. ...

19 CFR 10.616 - Verification and justification of claim for preferential tariff treatment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... RATE, ETC. Dominican Republic-Central America-United States Free Trade Agreement Origin Verifications... preferential tariff treatment. 10.616 Section 10.616 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... verification of a claim for preferential tariff treatment under CAFTA-DR for goods imported into the United...

School Building Design: The Building as an Instructional Tool.

ERIC Educational Resources Information Center

Rakestraw, William E.

1979-01-01

Concepts used in the design of a Dallas school make the building an integral part of the instructional program. These concepts include instrumented resource consumption, wind powered electrical generating capabilities, solar powered domestic hot water system, grey water cycling and sampling capabilities, and mechanical systems monitoring.…

77 FR 65439 - Implementation of United States-Panama Trade Promotion Agreement Tariff-Rate Quota for Imports of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-26

... Promotion Agreement Tariff-Rate Quota for Imports of Sugar AGENCY: Office of the United States Trade Representative. ACTION: Notice. SUMMARY: USTR is providing notice that the tariff-rate quotas for sugar... Agreement establishes three tariff-rate quotas for imports of sugar from Panama. USTR is providing notice...

Building configuration and seismic design: The architecture of earthquake resistance

NASA Astrophysics Data System (ADS)

Arnold, C.; Reitherman, R.; Whitaker, D.

1981-05-01

The architecture of a building in relation to its ability to withstand earthquakes was determined. Aspects of round motion which are significant to building behavior are discussed. Results of a survey of configuration decisions that affect the performance of buildings with a focus on the architectural aspects of configuration design are provided. Configuration derivation, building type as it relates to seismic design, and seismic design, and seismic issues in the design process are examined. Case studies of the Veterans' Administration Hospital in Loma Linda, California, and the Imperial Hotel in Tokyo, Japan, are presented. The seismic design process is described paying special attention to the configuration issues. The need is stressed for guidelines, codes, and regulations to ensure design solutions that respect and balance the full range of architectural, engineering, and material influences on seismic hazards.

Economic and environmental effects of accelerated tariff liberalization in the forest products sector.

Treesearch

D.J. Brooks; J.A. Ferrante; J. Haverkamp; I. Bowles; W. Lange; D. Darr

2001-01-01

This study assesses the incremental economic and environmental impacts resulting from changes in the timing and scope of forest products tariff reductions as proposed in the Accelerated Tariff Liberalization (ATL) initiative in forest products. This initiative was proposed for agreement among member countries of the World Trade Organization. The analysis of...

46 CFR 520.5 - Standard tariff terminology.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 9 2012-10-01 2012-10-01 false Standard tariff terminology. 520.5 Section 520.5 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN SHIPPING IN FOREIGN COMMERCE CARRIER.... Geological Survey. Ports published or approved for publication in the World Port Index (Pub. No. 150) should...

46 CFR 520.5 - Standard tariff terminology.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 9 2011-10-01 2011-10-01 false Standard tariff terminology. 520.5 Section 520.5 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN SHIPPING IN FOREIGN COMMERCE CARRIER.... Geological Survey. Ports published or approved for publication in the World Port Index (Pub. No. 150) should...

46 CFR 520.5 - Standard tariff terminology.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 9 2014-10-01 2014-10-01 false Standard tariff terminology. 520.5 Section 520.5 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN SHIPPING IN FOREIGN COMMERCE CARRIER.... Geological Survey. Ports published or approved for publication in the World Port Index (Pub. No. 150) should...

46 CFR 520.5 - Standard tariff terminology.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Standard tariff terminology. 520.5 Section 520.5 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN SHIPPING IN FOREIGN COMMERCE CARRIER.... Geological Survey. Ports published or approved for publication in the World Port Index (Pub. No. 150) should...

46 CFR 520.5 - Standard tariff terminology.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 9 2013-10-01 2013-10-01 false Standard tariff terminology. 520.5 Section 520.5 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN SHIPPING IN FOREIGN COMMERCE CARRIER.... Geological Survey. Ports published or approved for publication in the World Port Index (Pub. No. 150) should...

How will the reduction of tariffs and taxes on insecticide- treated bednets affect household purchases?

PubMed

Simon, Jonathon L; Larson, Bruce A; Zusman, Alexander; Rosen, Sydney

2002-01-01

One of the steps called for in the fight against malaria is the removal of tariffs and taxes on insecticide-treated bednets (ITNs), netting materials, and insecticides, with a view to reducing the retail prices of ITNs and thus increasing utilization. In this paper we develop an approach for analysing the extent to which reform of tariff and tax policy can be expected to increase ITN purchases. We consider the following questions: (1). How much does the retail price of ITNs change if tariffs and taxes are reduced or eliminated? (2). How responsive is consumer demand to changes in the retail price of ITNs? Data on the price elasticity of demand for ITNs are very limited. Nevertheless, they suggest that ITN demand is not highly responsive to lower prices if household preferences are held constant. The reduction in retail prices associated with the removal of tariffs and taxes depends on the structure of the market in individual countries. In Nigeria, reducing the tariff on insecticides from 42% to zero and the tariff on netting materials from 40% to 5% is expected to increase ITN purchases by 9-27%, depending on the elasticity used. Country-specific information about market structure and cost conditions is needed if predictions are to be made as to how a specific policy change will affect ITN purchases.

How will the reduction of tariffs and taxes on insecticide- treated bednets affect household purchases?

PubMed Central

Simon, Jonathon L.; Larson, Bruce A.; Zusman, Alexander; Rosen, Sydney

2002-01-01

One of the steps called for in the fight against malaria is the removal of tariffs and taxes on insecticide-treated bednets (ITNs), netting materials, and insecticides, with a view to reducing the retail prices of ITNs and thus increasing utilization. In this paper we develop an approach for analysing the extent to which reform of tariff and tax policy can be expected to increase ITN purchases. We consider the following questions: (1). How much does the retail price of ITNs change if tariffs and taxes are reduced or eliminated? (2). How responsive is consumer demand to changes in the retail price of ITNs? Data on the price elasticity of demand for ITNs are very limited. Nevertheless, they suggest that ITN demand is not highly responsive to lower prices if household preferences are held constant. The reduction in retail prices associated with the removal of tariffs and taxes depends on the structure of the market in individual countries. In Nigeria, reducing the tariff on insecticides from 42% to zero and the tariff on netting materials from 40% to 5% is expected to increase ITN purchases by 9-27%, depending on the elasticity used. Country-specific information about market structure and cost conditions is needed if predictions are to be made as to how a specific policy change will affect ITN purchases. PMID:12481212

47 CFR 61.49 - Supporting information to be submitted with letters of transmittal for tariffs of carriers...

Code of Federal Regulations, 2010 CFR

2010-10-01

... letters of transmittal for tariffs of carriers subject to price cap regulation. 61.49 Section 61.49... for tariffs of carriers subject to price cap regulation. (a) Each price cap tariff filing must be... pursuant to the methodologies provided in §§ 61.45, 61.46, and 61.47, as applicable. (b) Each price cap...

User Involvement in School Building Design

ERIC Educational Resources Information Center

Wright, Sharon

2004-01-01

The author of this article is the Managing Director of School Works, a groundbreaking school design initiative working in collaboration with partners such as the Architecture Foundation, DfES, Demos, and schools. School Works is a not for profit company which works to link the design of secondary school buildings with their impact on the teaching,…

18 CFR 154.205 - Withdrawals and amendments of tariff filings and executed service agreements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Withdrawals and... and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER NATURAL GAS ACT RATE SCHEDULES AND TARIFFS Procedures for Changing Tariffs § 154.205 Withdrawals and...

18 CFR 154.205 - Withdrawals and amendments of tariff filings and executed service agreements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Withdrawals and... and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER NATURAL GAS ACT RATE SCHEDULES AND TARIFFS Procedures for Changing Tariffs § 154.205 Withdrawals and...

18 CFR 154.205 - Withdrawals and amendments of tariff filings and executed service agreements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Withdrawals and... and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER NATURAL GAS ACT RATE SCHEDULES AND TARIFFS Procedures for Changing Tariffs § 154.205 Withdrawals and...

18 CFR 154.205 - Withdrawals and amendments of tariff filings and executed service agreements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Withdrawals and... and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER NATURAL GAS ACT RATE SCHEDULES AND TARIFFS Procedures for Changing Tariffs § 154.205 Withdrawals and...

Elements That Contribute to Healthy Building Design

PubMed Central

Loftness, Vivian; Hakkinen, Bert; Adan, Olaf; Nevalainen, Aino

2007-01-01

Background The elements that contribute to a healthy building are multifactorial and can be discussed from different perspectives. Objectives We present three viewpoints of designing a healthy building: the importance of sustainable development, the role of occupants for ensuring indoor air quality, and ongoing developments related to indoor finishes with low chemical emissions and good fungal resistance. Discussion Sustainable design rediscovers the social, environmental, and technical values of pedestrian and mixed-use communities, using existing infrastructures including “main streets” and small-town planning principles and recapturing indoor–outdoor relationships. This type of design introduces nonpolluting materials and assemblies with lower energy requirements and higher durability and recyclability. Building occupants play a major role in maintaining healthy indoor environments, especially in residences. Contributors to indoor air quality include cleaning habits and other behaviors; consumer products, furnishings, and appliances purchases, as well as where and how the occupants use them. Certification of consumer products and building materials as low-emitting products is a primary control measure for achieving good indoor air quality. Key products in this respect are office furniture, flooring, paints and coatings, adhesives and sealants, wall coverings, wood products, textiles, insulation, and cleaning products. Finishing materials play a major role in the quality of indoor air as related to moisture retention and mold growth. Conclusions Sustainable design emphasizes the needs of infrastructure, lower energy consumption, durability, and recyclability. To ensure good indoor air quality, the product development for household use should aim to reduce material susceptibility to contaminants such as mold and should adopt consumer-oriented product labeling. PMID:17589608

Elements that contribute to healthy building design.

PubMed

Loftness, Vivian; Hakkinen, Bert; Adan, Olaf; Nevalainen, Aino

2007-06-01

The elements that contribute to a healthy building are multifactorial and can be discussed from different perspectives. WE PRESENT THREE VIEWPOINTS OF DESIGNING A HEALTHY BUILDING: the importance of sustainable development, the role of occupants for ensuring indoor air quality, and ongoing developments related to indoor finishes with low chemical emissions and good fungal resistance. Sustainable design rediscovers the social, environmental, and technical values of pedestrian and mixed-use communities, using existing infrastructures including "main streets" and small-town planning principles and recapturing indoor-outdoor relationships. This type of design introduces nonpolluting materials and assemblies with lower energy requirements and higher durability and recyclability. Building occupants play a major role in maintaining healthy indoor environments, especially in residences. Contributors to indoor air quality include cleaning habits and other behaviors; consumer products, furnishings, and appliances purchases, as well as where and how the occupants use them. Certification of consumer products and building materials as low-emitting products is a primary control measure for achieving good indoor air quality. Key products in this respect are office furniture, flooring, paints and coatings, adhesives and sealants, wall coverings, wood products, textiles, insulation, and cleaning products. Finishing materials play a major role in the quality of indoor air as related to moisture retention and mold growth. Sustainable design emphasizes the needs of infrastructure, lower energy consumption, durability, and recyclability. To ensure good indoor air quality, the product development for household use should aim to reduce material susceptibility to contaminants such as mold and should adopt consumer-oriented product labeling.

49 CFR 1310.2 - Requirement to maintain tariffs.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... Tariffs shall be published in the English language and rates shall be stated in money of the United States... be provided to the Board promptly and free of charge, upon request, by mail or other delivery service...

49 CFR 1310.2 - Requirement to maintain tariffs.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... Tariffs shall be published in the English language and rates shall be stated in money of the United States... be provided to the Board promptly and free of charge, upon request, by mail or other delivery service...

49 CFR 1310.2 - Requirement to maintain tariffs.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... Tariffs shall be published in the English language and rates shall be stated in money of the United States... be provided to the Board promptly and free of charge, upon request, by mail or other delivery service...

49 CFR 1310.2 - Requirement to maintain tariffs.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... Tariffs shall be published in the English language and rates shall be stated in money of the United States... be provided to the Board promptly and free of charge, upon request, by mail or other delivery service...

49 CFR 1310.2 - Requirement to maintain tariffs.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... Tariffs shall be published in the English language and rates shall be stated in money of the United States... be provided to the Board promptly and free of charge, upon request, by mail or other delivery service...

Building Ecology and Partition Design. Technical Bulletin.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore.

This bulletin is intended as a resource for school system facility planners and architects who design schools. Ways in which decision makers can incorporate environmental concerns in the design of school buildings are detailed. Focus is on the design of interior partition systems. Partition systems in schools serve several purposes; they define…

Multiobjective Model of Time-of-Use and Stepwise Power Tariff for Residential Consumers in Regulated Power Markets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Bin; Yang, Rui; Li, Canbing

Here, time-of-use (TOU) rates and stepwise power tariff (SPT) are important economic levers to motivate residents to shift their electricity usage in response to electricity price. In this paper, a new multiobjective optimal tariff-making model of time-of-use and stepwise power tariff (TOUSPT) is proposed, which combines the complementary characteristics of two power tariffs, for residential energy conservation and peak load shaving. In the proposed approach, the residential demand response with price elasticity in regulated power market is considered to determine the optimum peak-valley TOU tariffs for each stepwise electricity partition. Furthermore, a practical case study is implemented to test themore » effectiveness of the proposed TOUSPT, and the results demonstrate that TOUSPT can achieve efficient end-use energy saving and also shift load from peak to off-peak periods.« less

Multiobjective Model of Time-of-Use and Stepwise Power Tariff for Residential Consumers in Regulated Power Markets

DOE PAGES

Zhou, Bin; Yang, Rui; Li, Canbing; ...

2017-07-04

Here, time-of-use (TOU) rates and stepwise power tariff (SPT) are important economic levers to motivate residents to shift their electricity usage in response to electricity price. In this paper, a new multiobjective optimal tariff-making model of time-of-use and stepwise power tariff (TOUSPT) is proposed, which combines the complementary characteristics of two power tariffs, for residential energy conservation and peak load shaving. In the proposed approach, the residential demand response with price elasticity in regulated power market is considered to determine the optimum peak-valley TOU tariffs for each stepwise electricity partition. Furthermore, a practical case study is implemented to test themore » effectiveness of the proposed TOUSPT, and the results demonstrate that TOUSPT can achieve efficient end-use energy saving and also shift load from peak to off-peak periods.« less

14 CFR 221.121 - How to prepare and file applications for Special Tariff Permission.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Special Tariff Permission To... notice shall conform to the requirements of § 221.212 if filed electronically. (b) Number of paper copies and place of filing. For paper format applications, the original and one copy of each such application...

18 CFR 341.3 - Form of tariff.

Code of Federal Regulations, 2012 CFR

2012-04-01

... corporate name of the carrier; (iii) The type of rates, e.g., local, joint, or proportional, and the... applicable; (viii) The name of the issuing officer or duly appointed official issuing the tariff, the complete street and mailing address of the carrier, and the name and phone number of the individual...

77 FR 51751 - Assessment of Fees for Dairy Import Licenses for the 2013 Tariff-Rate Import Quota Year

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-27

... Licenses for the 2013 Tariff- Rate Import Quota Year AGENCY: Foreign Agricultural Service, USDA. ACTION: Notice. SUMMARY: This notice announces a fee of $170 to be charged for the 2013 tariff- [[Page 51752... authorizing the importation of certain dairy articles, which are subject to tariff-rate quotas set forth in...

76 FR 60801 - Assessment of Fees for Dairy Import Licenses for the 2012 Tariff-Rate Import Quota Year

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-30

... Licenses for the 2012 Tariff- Rate Import Quota Year AGENCY: Foreign Agricultural Service, USDA. ACTION: Notice. SUMMARY: This notice announces a fee of $170 to be charged for the 2012 tariff-rate quota (TRQ...) authorizing the importation of certain dairy articles, which are subject to tariff-rate quotas set forth in...

Regional Design Approach in Designing Climatic Responsive Administrative Building in the 21st Century

NASA Astrophysics Data System (ADS)

Haja Bava Mohidin, Hazrina Binti; Ismail, Alice Sabrina

2015-01-01

The objective of this paper is to explicate on the study of modern administrative building in Malaysia which portrays regional design approach that conforms to the local context and climate by reviewing two case studies; Perdana Putra (1999) and former Prime Minister's Office (1967). This paper is significant because the country's stature and political statement was symbolized by administrative building as a national icon. In other words, it is also viewed as a cultural object that is closely tied to a particular social context and nation historical moment. Administrative building, therefore, may exhibit various meanings. This paper uses structuralism paradigm and semiotic principles as a methodological approach. This paper is of importance for practicing architects and society in the future as it offers new knowledge and understanding in identifying the suitable climatic consideration that may reflect regionalist design approach in modern administrative building. These elements then may be adopted in designing public buildings in the future with regional values that are important for expressing national culture to symbolize the identity of place and society as well as responsive to climate change.

Assessing DRG cost accounting with respect to resource allocation and tariff calculation: the case of Germany

PubMed Central

2012-01-01

The purpose of this paper is to analyze the German diagnosis related groups (G-DRG) cost accounting scheme by assessing its resource allocation at hospital level and its tariff calculation at national level. First, the paper reviews and assesses the three steps in the G-DRG resource allocation scheme at hospital level: (1) the groundwork; (2) cost-center accounting; and (3) patient-level costing. Second, the paper reviews and assesses the three steps in G-DRG national tariff calculation: (1) plausibility checks; (2) inlier calculation; and (3) the “one hospital” approach. The assessment is based on the two main goals of G-DRG introduction: improving transparency and efficiency. A further empirical assessment attests high costing quality. The G-DRG cost accounting scheme shows high system quality in resource allocation at hospital level, with limitations concerning a managerially relevant full cost approach and limitations in terms of advanced activity-based costing at patient-level. However, the scheme has serious flaws in national tariff calculation: inlier calculation is normative, and the “one hospital” model causes cost bias, adjustment and representativeness issues. The G-DRG system was designed for reimbursement calculation, but developed to a standard with strategic management implications, generalized by the idea of adapting a hospital’s cost structures to DRG revenues. This combination causes problems in actual hospital financing, although resource allocation is advanced at hospital level. PMID:22935314

Assessing DRG cost accounting with respect to resource allocation and tariff calculation: the case of Germany.

PubMed

Vogl, Matthias

2012-08-30

The purpose of this paper is to analyze the German diagnosis related groups (G-DRG) cost accounting scheme by assessing its resource allocation at hospital level and its tariff calculation at national level. First, the paper reviews and assesses the three steps in the G-DRG resource allocation scheme at hospital level: (1) the groundwork; (2) cost-center accounting; and (3) patient-level costing. Second, the paper reviews and assesses the three steps in G-DRG national tariff calculation: (1) plausibility checks; (2) inlier calculation; and (3) the "one hospital" approach. The assessment is based on the two main goals of G-DRG introduction: improving transparency and efficiency. A further empirical assessment attests high costing quality. The G-DRG cost accounting scheme shows high system quality in resource allocation at hospital level, with limitations concerning a managerially relevant full cost approach and limitations in terms of advanced activity-based costing at patient-level. However, the scheme has serious flaws in national tariff calculation: inlier calculation is normative, and the "one hospital" model causes cost bias, adjustment and representativeness issues. The G-DRG system was designed for reimbursement calculation, but developed to a standard with strategic management implications, generalized by the idea of adapting a hospital's cost structures to DRG revenues. This combination causes problems in actual hospital financing, although resource allocation is advanced at hospital level.

47 CFR 61.22 - Composition of tariffs.

Code of Federal Regulations, 2010 CFR

2010-10-01

...Perfect 5.1, Microsoft Word 6, or Microsoft Word 97 software. No diskettes shall contain more than one... clearly labelled with the carrier's name, Tariff Number, software used, and the date of submission. When... defined in § 1.4(e)(2) of this chapter. (d) Domestic and international nondominant carriers subject to the...

An Empirical Analysis of the Effectiveness of Design-Build Construction Contracts

DTIC Science & Technology

1993-08-01

features and benefits with traditional design/bid/build. Several types of design/build organizations are examined, with their relative advantages and... benefits transferable to government contracting? Perhaps the most logical approach would be to compare point by point the various advantages and...consider to be critical to their competitive advantage in the market. This paper opens with a review of the development of design/build, then contrasts its

Effects of Newly Designed Hospital Buildings on Staff Perceptions: A Pre-Post Study to Validate Design Decisions.

PubMed

Schreuder, Eliane; van Heel, Liesbeth; Goedhart, Rien; Dusseldorp, Elise; Schraagen, Jan Maarten; Burdorf, Alex

2015-01-01

This study investigates effects of the newly built nonpatient-related buildings of a large university medical center on staff perceptions and whether the design objectives were achieved. The medical center is gradually renewing its hospital building area of 200,000 m.(2) This redevelopment is carefully planned and because lessons learned can guide design decisions of the next phase, the medical center is keen to evaluate the performance of the new buildings. A pre- and post-study with a control group was conducted. Prior to the move to the new buildings an occupancy evaluation was carried out in the old setting (n = 729) (pre-study). Post occupation of the new buildings another occupancy evaluation (post-study) was carried out in the new setting (intervention group) and again in some old settings (control group) (n = 664). The occupancy evaluation consisted of an online survey that measured the perceived performance of different aspects of the building. Longitudinal multilevel analysis was used to compare the performance of the old buildings with the new buildings. Significant improvements were found in indoor climate, perceived safety, working environment, well-being, facilities, sustainability, and overall satisfaction. Commitment to the employer, working atmosphere, orientation, work performance, and knowledge sharing did not improve. The results were interpreted by relating them to specific design choices. We showed that it is possible to measure the performance improvements of a complex intervention being a new building design and validate design decisions. A focused design process aiming for a safe, pleasant and sustainable building resulted in actual improvements in some of the related performance measures. © The Author(s) 2015.

76 FR 61956 - Electronic Tariff Filing System (ETFS)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-06

...] Electronic Tariff Filing System (ETFS) AGENCY: Federal Communications Commission. ACTION: Final rule; announcement of effective date. SUMMARY: In this document, the Commission announces that the Office of Management and Budget (OMB) has approved, for a period of three years, the information collection associated...

Performance of the Tariff Method: validation of a simple additive algorithm for analysis of verbal autopsies

PubMed Central

2011-01-01

Background Verbal autopsies provide valuable information for studying mortality patterns in populations that lack reliable vital registration data. Methods for transforming verbal autopsy results into meaningful information for health workers and policymakers, however, are often costly or complicated to use. We present a simple additive algorithm, the Tariff Method (termed Tariff), which can be used for assigning individual cause of death and for determining cause-specific mortality fractions (CSMFs) from verbal autopsy data. Methods Tariff calculates a score, or "tariff," for each cause, for each sign/symptom, across a pool of validated verbal autopsy data. The tariffs are summed for a given response pattern in a verbal autopsy, and this sum (score) provides the basis for predicting the cause of death in a dataset. We implemented this algorithm and evaluated the method's predictive ability, both in terms of chance-corrected concordance at the individual cause assignment level and in terms of CSMF accuracy at the population level. The analysis was conducted separately for adult, child, and neonatal verbal autopsies across 500 pairs of train-test validation verbal autopsy data. Results Tariff is capable of outperforming physician-certified verbal autopsy in most cases. In terms of chance-corrected concordance, the method achieves 44.5% in adults, 39% in children, and 23.9% in neonates. CSMF accuracy was 0.745 in adults, 0.709 in children, and 0.679 in neonates. Conclusions Verbal autopsies can be an efficient means of obtaining cause of death data, and Tariff provides an intuitive, reliable method for generating individual cause assignment and CSMFs. The method is transparent and flexible and can be readily implemented by users without training in statistics or computer science. PMID:21816107

Building Integrated Design Practice under the Concept of Sustainable Development

NASA Astrophysics Data System (ADS)

Liu, Xuexin

2018-03-01

With the continuous development of social economy, people are more demanding for architecture. Some advanced design concepts are gradually applied to the design of buildings. Under the concept of sustainable development, building integration design has also been widely used to promote the rapid development of architectural design. Integrated design concepts and sustainable development concepts play an important role to meet people’s requirements. This article will explore the concept of sustainable development under the concept of integrated architectural design and practice analysis, propose appropriate measures.

Levers supporting tariff growth for water services: evidence from a contingent valuation analysis.

PubMed

Guerrini, Andrea; Vigolo, Vania; Romano, Giulia; Testa, Federico

2018-02-01

The backwardness of the water utilities sector necessitates urgent investment in infrastructure to improve water quality and efficiency in water supply networks. A policy of tariff growth represents the main source to sustain such investments. Therefore, customer engagement in the form of willingness to pay (WTP) is highly desirable by water utilities to obtain social legitimization and support. This study examines the determinants of consumers' WTP for improvement programs for three drinking water issues: quality of water sources, renewal of water mains, and building of new wastewater treatment plants. The study is based on a survey conducted among a sample of 587 customers of a water utility located in the province of Verona in the north of Italy. The contingence valuation method is used to measure WTP. Specifically, an ordinal logistic regression model yields the following significant determinants of WTP: quality of water and services provided, preference for privatization of the water utility, sustainable consumption of water, and some socio-demographic variables. The findings provide interesting insights into the drivers of WTP as well as managerial recommendations for water utilities. In particular, the findings show that water utilities need to improve service and water quality to increase customers' acceptance of tariff growth. In addition, utilities should invest in customer education and communication activities focusing on specific age groups (e.g., older customers) to enhance their WTP. Finally, communication strategies should reinforce the possible role of liberalization and privatization in supporting infrastructure investments. Copyright © 2017 Elsevier Ltd. All rights reserved.

18 CFR 154.205 - Withdrawals and amendments of tariff filings and executed service agreements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... agreements prior to Commission action. (1) A natural gas company may withdraw in its entirety a tariff filing... order has been issued by filing a withdrawal motion with the Commission. Upon the filing of such motion...) of the Natural Gas Act in the absence of Commission action making the rate schedule or tariff filing...

47 CFR 61.22 - Composition of tariffs.

Code of Federal Regulations, 2011 CFR

2011-10-01

.../2 inch (8.89 cm) diskette, or a 5 inch CD-ROM, formatted in an IBM-compatible form using either Word... tariff. The diskette or CD-ROM must be submitted in “read only” mode. The diskette or CD-ROM must be... multiple diskettes or CD-ROMs are submitted, the issuing carrier shall clearly label each diskette in the...

47 CFR 69.3 - Filing of access service tariffs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... waiver includes a request for confidentiality of some or all of the materials supporting the request..., 103 FCC 2d 1026-1027 (1986). (4) If a telephone company elects to withdraw from Association tariffs...

Design-Build Process for the Research Support Facility (RSF) (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-06-01

An in-depth look at how the U.S. DOE and NREL used a performance-based design-build contract to build the Research Support Facility (RSF); one of the most energy efficient office buildings in the world.

SOCIAL PSYCHOLOGICAL ASPECTS OF SCHOOL BUILDING DESIGN.

ERIC Educational Resources Information Center

KEITH, PAT M.; SMITH, LOUIS M.

THE DEVELOPMENT AND INTEGRATION OF SOCIOPSYCHOLOGICAL ASPECTS OF SCHOOL DESIGN WERE INVESTIGATED BY FOCUSING ON THE IMPACT OF A UNIQUELY DESIGNED ELEMENTARY SCHOOL BUILDING, THE KENSINGTON SCHOOL. AN ATTEMPT WAS MADE TO SYNTHESIZE ROLE THEORY, DECISION MAKING THEORY, SOCIAL SYSTEM THEORY, AND SUCH PROBLEM AREAS AS STAFF PEER GROUPS, EDUCATIONAL…

Boat Building Design and Construction Techniques in the Architectural Design Studio.

ERIC Educational Resources Information Center

Smith, Richard A.

1982-01-01

Describes a model boat building project for architectural design studios. Working from traditional sailboat designs, students study the "lines" drawings of boats, make full-size drawings from scale drawings, and then construct model wooden boats. Available from Carfax Publishing Company, P.O. Box 25, Abindgon, Oxfordshire OX14 1RW…

Analyses of Public Utility Building - Students Designs, Aimed at their Energy Efficiency Improvement

NASA Astrophysics Data System (ADS)

Wołoszyn, Marek Adam

2017-10-01

Public utility buildings are formally, structurally and functionally complex entities. Frequently, the process of their design involves the retroactive reconsideration of energy engineering issues, once a building concept has already been completed. At that stage, minor formal corrections are made along with the design of the external layer of the building in order to satisfy applicable standards. Architecture students do the same when designing assigned public utility buildings. In order to demonstrate energy-related defects of building designs developed by students, the conduct of analyses was proposed. The completed designs of public utility buildings were examined with regard to energy efficiency of the solutions they feature through the application of the following programs: Ecotect, Vasari, and in case of simpler analyses ArchiCad program extensions were sufficient.

Spent nuclear fuel canister storage building conceptual design report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swenson, C.E.

This Conceptual Design Report provides the technical basis for the Spent Nuclear Fuels Project, Canister Storage Building, and as amended by letter (correspondence number 9555700, M.E. Witherspoon to E.B. Sellers, ``Technical Baseline and Updated Cost Estimate for the Canister Storage Building``, dated October 24, 1995), includes the project cost baseline and Criteria to be used as the basis for starting detailed design in fiscal year 1995.

Feed-In Tariffs and similar programs

EIA Publications

2013-01-01

Feed-in tariffs (FITs) are a policy mechanism used to encourage deployment of renewable electricity technologies. FITs are used to a limited extent around the United States as listed. A FIT program typically guarantees that customers who own a FIT-eligible renewable electricity generation facility, such as a roof-top solar photovoltaic system, will receive a set price from their utility for all of the electricity they generate and provide to the grid.

Use Of Infrared Thermography For The Identification Of Design And Construction Faults In Buildings

NASA Astrophysics Data System (ADS)

Seeber, Stephen A.

1984-03-01

Many design and construction details can affect building energy consumption in unex-pected ways. Further, design and construction errors can increase building energy consumption, result in discomfort to building occupants and cause structural damage to the building. Infrared inspections can easily evaluate the energy efficiency of various aspects of a building's design and identify flaws that might otherwise be detected as a result of occupants' complaints or damage to the building's mechanical or structural systems. Infrared thermography can be used by the architect to evaluate his designs and by the contractor to control the quality of construction. This paper discusses a number of issues that can help determine the effectiveness of infrared building surveys. Following this, three case stud-ies will be presented to illustrate design flaws that were detected through infrared build-ing surveys.

18 CFR 35.1 - Application; obligation to file rate schedules, tariffs and certain service agreements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... specifically setting forth all rates and charges for any transmission or sale of electric energy subject to the... same rate schedule or tariff, each public utility transmitting or selling electric energy subject to... schedule, tariff, or service agreement applicable to a transmission or sale of electric energy, other than...

77 FR 37614 - Tariffs (Other Than Tariff Review Plan); Connect America Fund; A National Broadband Plan for Our...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

...-109; GN Docket No. 09-51; CC Docket Nos. 01-92, 96-45; WT Docket No. 10-208; FCC 11-161] Tariffs... required by the Paperwork Reduction Act (PRA) of 1995 (44 U.S.C. 3501-3520), 77 FR 20629, April 5, 2012... Reduction Act of 1995 (44 U.S.C. 3507), the FCC is notifying the public that it received OMB approval on May...

Amphibian Oasis: Designing and Building a Schoolyard Pond.

ERIC Educational Resources Information Center

Gosselin, Heather; Johnson, Bob

1996-01-01

Building a pond in a schoolyard is a rewarding way to help boost local populations of amphibians, to increase the natural value of school grounds, and to serve as a locale for observing the life cycles of plants, invertebrates, and amphibians. This article outlines important considerations in designing and building a pond from siting through…

19 CFR 132.17 - Export certificate for sugar-containing products subject to tariff-rate quota.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Export certificate for sugar-containing products subject to tariff-rate quota. 132.17 Section 132.17 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... certificate for sugar-containing products subject to tariff-rate quota. (a) Requirement. For sugar-containing...

19 CFR 132.17 - Export certificate for sugar-containing products subject to tariff-rate quota.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Export certificate for sugar-containing products subject to tariff-rate quota. 132.17 Section 132.17 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... certificate for sugar-containing products subject to tariff-rate quota. (a) Requirement. For sugar-containing...

19 CFR 132.17 - Export certificate for sugar-containing products subject to tariff-rate quota.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Export certificate for sugar-containing products subject to tariff-rate quota. 132.17 Section 132.17 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... certificate for sugar-containing products subject to tariff-rate quota. (a) Requirement. For sugar-containing...

19 CFR 132.17 - Export certificate for sugar-containing products subject to tariff-rate quota.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Export certificate for sugar-containing products subject to tariff-rate quota. 132.17 Section 132.17 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... certificate for sugar-containing products subject to tariff-rate quota. (a) Requirement. For sugar-containing...

19 CFR 132.17 - Export certificate for sugar-containing products subject to tariff-rate quota.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Export certificate for sugar-containing products subject to tariff-rate quota. 132.17 Section 132.17 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... certificate for sugar-containing products subject to tariff-rate quota. (a) Requirement. For sugar-containing...

19 CFR 162.75 - Seizures limited under section 592, Tariff Act of 1930, as amended.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Seizures limited under section 592, Tariff Act of... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) INSPECTION, SEARCH, AND SEIZURE Special Procedures for Certain Violations § 162.75 Seizures limited under section 592, Tariff Act of 1930, as amended...

Assigning Robust Default Values in Building Performance Simulation Software for Improved Decision-Making in the Initial Stages of Building Design.

PubMed

Hiyama, Kyosuke

2015-01-01

Applying data mining techniques on a database of BIM models could provide valuable insights in key design patterns implicitly present in these BIM models. The architectural designer would then be able to use previous data from existing building projects as default values in building performance simulation software for the early phases of building design. The author has proposed the method to minimize the magnitude of the variation in these default values in subsequent design stages. This approach maintains the accuracy of the simulation results in the initial stages of building design. In this study, a more convincing argument is presented to demonstrate the significance of the new method. The variation in the ideal default values for different building design conditions is assessed first. Next, the influence of each condition on these variations is investigated. The space depth is found to have a large impact on the ideal default value of the window to wall ratio. In addition, the presence or absence of lighting control and natural ventilation has a significant influence on the ideal default value. These effects can be used to identify the types of building conditions that should be considered to determine the ideal default values.

A broader consideration of human factor to enhance sustainable building design.

PubMed

Attaianese, Erminia

2012-01-01

The link between ergonomic/human factor and sustainability seems to be clearly evidenced mainly in relation to social dimension of sustainability, in order to contribute to assure corporate social responsibility and global value creation. But the will to establish an equilibrated connection among used resources in human activities, supported by the sustainability perspective, evidences that the contribution of ergonomics/human factors can be effectively enlarged to other aspects, especially in relation to building design. In fact a sustainable building is meant to be a building that contributes, through its characteristics and attribute, to a sustainable development by assuring, in the same time, a decrease of resources use and environmental impact and an increase of health, safety and comfort of the occupants. The purpose of this paper is to analyze in a broader sense the contribution of ergonomic/human factor to design of sustainable building, focusing how ergonomics principles, methodology and techniques can improve building design, enhancing its sustainability performance during all phases of building lifecycle.

Performative building envelope design correlated to solar radiation and cooling energy consumption

NASA Astrophysics Data System (ADS)

Jacky, Thiodore; Santoni

2017-11-01

Climate change as an ongoing anthropogenic environmental challenge is predominantly caused by an amplification in the amount of greenhouse gases (GHGs), notably carbon dioxide (CO2) in building sector. Global CO2 emissions are emitted from HVAC (Heating, Ventilation, and Air Conditioning) occupation to provide thermal comfort in building. In fact, the amount of energy used for cooling or heating building is implication of building envelope design. Building envelope acts as interface layer of heat transfer between outdoor environment and the interior of a building. It appears as wall, window, roof and external shading device. This paper examines performance of various design strategy on building envelope to limit solar radiation and reduce cooling loads in tropical climate. The design strategies are considering orientation, window to wall ratio, material properties, and external shading device. This research applied simulation method using Autodesk Ecotect to investigate simultaneously between variations of wall and window ratio, shading device composition and the implication to the amount of solar radiation, cooling energy consumption. Comparative analysis on the data will determine logical variation between opening and shading device composition and cooling energy consumption. Optimizing the building envelope design is crucial strategy for reducing CO2 emissions and long-term energy reduction in building sector. Simulation technology as feedback loop will lead to better performative building envelope.

Tackling fuel poverty through facilitating energy tariff switching: a participatory action research study in vulnerable groups.

PubMed

Lorenc, A; Pedro, L; Badesha, B; Dize, C; Fernow, I; Dias, L

2013-10-01

A fifth of UK households live in fuel poverty, with significant health risks. Recent government strategy integrates public health with local government. This study examined barriers to switching energy tariffs and the impact of an energy tariff switching 'intervention' on vulnerable peoples' likelihood to, success in, switching tariffs. Participatory Action Research (PAR), conducted in West London. Community researchers from three voluntary/community organisations (VCOs) collaborated in recruitment, study design, data collection and analysis. VCOs recruited 151 participants from existing service users in three groups: Black and Minority Ethnic (BME) communities, older people (>75 yrs) and families with young children. Researchers conducted two semi-structured interviews with each participant, a week apart. The first interview asked about demographics, current energy supplier, financial situation, previous experience of tariff-switching and barriers to switching. Researchers then provided the 'intervention' - advice on tariff-switching, printed materials, access to websites. The second interview explored usefulness of the 'intervention', other information used, remaining barriers and information needs. Researchers kept case notes and a reflective log. Data was analysed thematically and collaboratively between the research coordinator and researchers. Quantitative data was analysed using SPSS, with descriptive statistics and Chi-squared tests. A total of 151 people were interviewed: 47 older people over 75 years, 51 families with young children, 51 BME (two were missing demographics). The majority were not White British or UK-born. Average household weekly income was £230. Around half described 'difficult' financial situations, 94% were receiving state benefits and 62% were in debt. Less than a third had tried to find a better energy deal; knowledge was the main barrier. After the intervention 19 people tried to switch, 13 did. Young families were most likely to

10 CFR 435.306 - Selecting a life cycle effective proposed building design.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

10 CFR 435.306 - Selecting a life cycle effective proposed building design.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

10 CFR 435.306 - Selecting a life cycle effective proposed building design.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

10 CFR 435.306 - Selecting a life cycle effective proposed building design.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

14 CFR 292.22 - Effectiveness of tariffs on file.

Code of Federal Regulations, 2010 CFR

2010-01-01

... under 49 USC 41504 and the provisions of 14 CFR part 221, and are cancelled by operation of law. Any... adherence to filed tariffs in 49 USC 41510 and the related provisions of 14 CFR part 221 as of November 30...

14 CFR 221.550 - Copies of tariffs made from filer's printer(s) located in Department's public reference room.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS... public reference room. Copies of information contained in a filer's on-line tariff database may be...

14 CFR 221.550 - Copies of tariffs made from filer's printer(s) located in Department's public reference room.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS... public reference room. Copies of information contained in a filer's on-line tariff database may be...

14 CFR 221.550 - Copies of tariffs made from filer's printer(s) located in Department's public reference room.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS... public reference room. Copies of information contained in a filer's on-line tariff database may be...

14 CFR 221.550 - Copies of tariffs made from filer's printer(s) located in Department's public reference room.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS... public reference room. Copies of information contained in a filer's on-line tariff database may be...

An Innovation in Building Design

NASA Astrophysics Data System (ADS)

1980-01-01

Collins & Aikman's flat cable permits elimination of ducts and other accommodations traditionally required for building wiring systems, thus gives designers new latitude in planning attractive "open landscape" office layouts. The big factor is that FCC, whose thickness approximates that of two business cards, can be mounted on walls and floors instead of in them, and can be installed beneath a carpet or along a baseboard. Originating from Apollo's command module, its essential sheathing is designed to look like decor rather than plumbing. This could possibly eliminate traditional ducting under floors and elsewhere necessary to accommodate conventional wiring. Construction costs are reduced by 14 percent.

New Buildings Design | Climate Neutral Research Campuses | NREL

Science.gov Websites

over a building's lifetime, energy efficiency represents the lowest cost strategy for reducing energy (ft2*yr) to $16/ft2*yr. This means that if you are designing a new 100,000-ft2 building, it could cost as much as $1.6 million per year to operate. Given this baseline, life cycle cost calculations are

Assigning Robust Default Values in Building Performance Simulation Software for Improved Decision-Making in the Initial Stages of Building Design

PubMed Central

2015-01-01

Applying data mining techniques on a database of BIM models could provide valuable insights in key design patterns implicitly present in these BIM models. The architectural designer would then be able to use previous data from existing building projects as default values in building performance simulation software for the early phases of building design. The author has proposed the method to minimize the magnitude of the variation in these default values in subsequent design stages. This approach maintains the accuracy of the simulation results in the initial stages of building design. In this study, a more convincing argument is presented to demonstrate the significance of the new method. The variation in the ideal default values for different building design conditions is assessed first. Next, the influence of each condition on these variations is investigated. The space depth is found to have a large impact on the ideal default value of the window to wall ratio. In addition, the presence or absence of lighting control and natural ventilation has a significant influence on the ideal default value. These effects can be used to identify the types of building conditions that should be considered to determine the ideal default values. PMID:26090512

23 CFR 636.202 - When are two-phase design-build selection procedures appropriate?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false When are two-phase design-build selection procedures appropriate? 636.202 Section 636.202 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Selection Procedures, Award Criteria § 636.202 When are two-phase design-build...

Toward the Environmental Design of Library Buildings.

ERIC Educational Resources Information Center

Veatch, Lamar

1987-01-01

Reviews four environmental design and environmental psychology concepts and summarizes their implications for library building planning: (1) privacy; (2) proxemics and personal space; (3) territoriality; and (4) ergonomics and human factors. (34 references) (MES)

Building STEAM in Design-Related Technology

ERIC Educational Resources Information Center

Maldonado, Elaine; Pearson, Karen R.

2013-01-01

TECH-FIT is a National Science Foundation initiative at FIT, part of the State University of New York. An institution with over 85% female students, this interdisciplinary, design-related STEM (Science, Technology, Engineering, and Mathematics) project sought to increase inclusion and student performance in STEM. Building on new and existing…

Building inhabitant feedback: Creating a reflective practice for environmental design using activity theory

NASA Astrophysics Data System (ADS)

Cunningham, Dara Suzanne

The way buildings are designed now, there is little feedback from use involved in the design process. Attempts to correct this problem have been made in the form of Post Occupancy Evaluations (POEs) for 50-years but have largely failed. POEs are the accepted method for environmental designers to collect feedback about buildings in use. They are infrequently conducted, after the building is built, in a one-time only evaluation, and not funded as part of the build process. Other products receive feedback about the design in use from online critiques. Online critiques could provide a platform for feedback from actors engaged with buildings in use for environmental designers to utilize in developing reflective design rationale to avoid adverse consequences in future designs or correct consequences in past and current designs. Since buildings constitute such a large part of the human environment, it's important to research the effects of buildings on their inhabitants. In order for environmental designers to act on feedback from situated use, designers need to have access to that feedback and all actors interacting with the building design need to have an easy, inexpensive, and accessible method to submit feedback. These needs can be addressed by utilizing modern networked and mobile computing to collect and access building feedback. The analysis presented in this dissertation is informed by a thorough evaluation of the theory of reflective practice, activity theory, environmental design, and cognitive science research. From this analysis, I developed the following contributions. First, I expanded Schon's reflective practice by combining his theory with a modified version of activity theory, using activity theory to enrich reflective practice and create Reflective Activity Systems Theory (RAST), which provides a new framework to develop design rationale based on feedback from use and a focus on the activity. Second, I suggest the design of an activity information system

18 CFR 154.602 - Cancellation or termination of a tariff, executed service agreement or part thereof.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Cancellation or... Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER NATURAL GAS ACT RATE SCHEDULES AND TARIFFS Other Tariff Changes § 154.602 Cancellation or termination of a...

18 CFR 154.602 - Cancellation or termination of a tariff, executed service agreement or part thereof.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Cancellation or... Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER NATURAL GAS ACT RATE SCHEDULES AND TARIFFS Other Tariff Changes § 154.602 Cancellation or termination of a...

18 CFR 154.602 - Cancellation or termination of a tariff, executed service agreement or part thereof.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Cancellation or... Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER NATURAL GAS ACT RATE SCHEDULES AND TARIFFS Other Tariff Changes § 154.602 Cancellation or termination of a...

18 CFR 154.602 - Cancellation or termination of a tariff, executed service agreement or part thereof.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Cancellation or... Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER NATURAL GAS ACT RATE SCHEDULES AND TARIFFS Other Tariff Changes § 154.602 Cancellation or termination of a...

18 CFR 154.602 - Cancellation or termination of a tariff, executed service agreement or part thereof.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Cancellation or... Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER NATURAL GAS ACT RATE SCHEDULES AND TARIFFS Other Tariff Changes § 154.602 Cancellation or termination of a...

78 FR 45597 - Modification of the Harmonized Tariff Schedule of the United States for Certain Cheeses

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-29

... OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE Modification of the Harmonized Tariff Schedule of the United States for Certain Cheeses AGENCY: Office of the United States Trade Representative. ACTION... and Romania in the EU-27, the tariff-rate quota (TRQ) allocations for certain cheeses from the EU-25...

23 CFR 636.105 - Is the FHWA requiring the use of design-build?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Is the FHWA requiring the use of design-build? 636.105 Section 636.105 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.105 Is the FHWA requiring the use of design-build? No, the FHWA is neither requiring nor...

Natural Ventilation of Buildings through Light Shafts. Design-Based Solution Proposals

NASA Astrophysics Data System (ADS)

Ángel Padilla-Marcos, Miguel; Meiss, Alberto; Feijó-Muñoz, Jesús

2017-10-01

This work analyses how the built environment affects the quality of the air to be introduced into buildings from light shafts. Several factors such as urban environment and building design intervene in the ability of the light shaft to produce its air change process. Urban areas continuously pollute the air in cities which affects the human health and the environment sustainability. Poor air quality outside buildings supposes a big energy waste to promote an acceptable air quality inside buildings. That requires a large flow rate to maintain the indoor air quality which is translated to an energy efficiency term. The main objective focuses on the impact of standardized architecture design in the quality of the indoor air dependent on the air change in the light shaft. The air change capacity of the outdoor space is numbered analysed using the concept of air change efficiency (ACE). ACE is determined by the built environment, the wind conditions and the design of the building containing light shafts. This concept is comparatively evaluated inside a control domain virtually defined to obtain the mean age of the air for a known air volume. The longer the light shaft in the wind direction is, the better the ACE is compared with other options. Light shafts up to 12 metres high are the most suitable in order to obtain acceptable efficiency results. Other studied cases verify that assumption. Different simplified tools for the technicians to evaluate the design of buildings containing light shafts are proposed. Some strategies of architectural design of buildings with light shafts to be used for ventilation are presented.

Water supply development and tariffs in Tanzania: From free water policy towards cost recovery

NASA Astrophysics Data System (ADS)

Mashauri, Damas A.; Katko, Tapio S.

1993-01-01

The article describes the historical development of water tariff policy in Tanzania from the colonial times to present. After gaining independence, the country introduced “free” water policy in its rural areas. Criticism against this policy was expressed already in the 1970s, but it was not until the late 1980s that change became unavoidable. All the while urban water tariffs continued to decline in real terms. In rural and periurban areas of Tanzania consumers often have to pay substantial amounts of money for water to resellers and vendors since the public utilities are unable to provide operative service. Besides, only a part of the water bills are actually collected. Now that the free water supply policy has been officially abandoned, the development of water tariffs and the institutions in general are a great challenge for the country.

Can Building Design Impact Physical Activity? A Natural Experiment.

PubMed

Eyler, Amy A; Hipp, Aaron; Valko, Cheryl Ann; Ramadas, Ramya; Zwald, Marissa

2018-05-01

Workplace design can impact workday physical activity (PA) and sedentary time. The purpose of this study was to evaluate PA behavior among university employees before and after moving into a new building. A pre-post, experimental versus control group study design was used. PA data were collected using surveys and accelerometers from university faculty and staff. Accelerometry was used to compare those moving into the new building (MOVERS) and those remaining in existing buildings (NONMOVERS) and from a control group (CONTROLS). Survey results showed increased self-reported PA for MOVERS and NONMOVERS. All 3 groups significantly increased in objectively collected daily energy expenditure and steps per day. The greatest steps per day increase was in CONTROLS (29.8%) compared with MOVERS (27.5%) and NONMOVERS (15.9%), but there were no significant differences between groups at pretest or posttest. Self-reported and objectively measured PA increased from pretest to posttest in all groups; thus, the increase cannot be attributed to the new building. Confounding factors may include contamination bias due to proximity of control site to experimental site and introduction of a university PA tracking contest during postdata collection. Methodology and results can inform future studies on best design practices for increasing PA.

Knotworking and the Visibilization of Learning in Building Design

ERIC Educational Resources Information Center

Kerosuo, Hannele; Mäki, Tarja; Korpela, Jenni

2015-01-01

Purpose: This paper aims to study the visibilization of learning in the context of developing a new collaborative practice, knotworking, in building design. The case under study describes the process of learning from the initiation of knotworking to its experimentation. The implementation of new building information modeling tools acted as an…

23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

Code of Federal Regulations, 2010 CFR

2010-04-01

... ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.104 Does this part apply to all Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2010-04-01 2010-04-01 false Does this part apply to all Federal-aid design-build...

23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

Code of Federal Regulations, 2014 CFR

2014-04-01

... ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.104 Does this part apply to all Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2014-04-01 2014-04-01 false Does this part apply to all Federal-aid design-build...

23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

Code of Federal Regulations, 2013 CFR

2013-04-01

... ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.104 Does this part apply to all Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2013-04-01 2013-04-01 false Does this part apply to all Federal-aid design-build...

23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

Code of Federal Regulations, 2012 CFR

2012-04-01

... ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.104 Does this part apply to all Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2012-04-01 2012-04-01 false Does this part apply to all Federal-aid design-build...

The potential of net zero energy buildings (NZEBs) concept at design stage for healthcare buildings towards sustainable development

NASA Astrophysics Data System (ADS)

Hazli Abdellah, Roy; Asrul Nasid Masrom, Md; Chen, Goh Kai; Mohamed, Sulzakimin; Omar, Roshartini

2017-11-01

The focus on net-zero energy buildings (NZEBs) has been widely analysed and discussed particularly when European Union Parliament are progressively moving towards regulation that promotes the improvement of energy efficiency (EE). Additionally, it also to reduce energy consumption through the recast of the EU Directive on Energy Performance of Buildings (EPBD) in which all new buildings to be “nearly Zero-Energy” Buildings by 2020. Broadly, there is a growing trend to explore the feasibility of net zero energy in healthcare sector as the level energy consumption for healthcare sector is found significantly high. Besides that, healthcare buildings energy consumption also exceeds of many other nondomestic building types, and this shortcoming is still undetermined yet especially for developing countries. This paper aims to review the potential of NZEBs in healthcare buildings by considering its concept in design features. Data are gathered through a comprehensive energy management literature review from previous studies. The review is vital to encourage construction players to increase their awareness, practices, and implementation of NZEBs in healthcare buildings. It suggests that NZEBs concept has a potential to be adapted in healthcare buildings through emphasizing of passive approach as well as the utilization of energy efficiency systems and renewable energy systems in buildings. This paper will provide a basis knowledge for construction key players mainly architects to promote NZEBs concept at design stage for healthcare buildings development.

Impact of Large Scale Energy Efficiency Programs On Consumer Tariffs and Utility Finances in India

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abhyankar, Nikit; Phadke, Amol

2011-01-20

Large-scale EE programs would modestly increase tariffs but reduce consumers' electricity bills significantly. However, the primary benefit of EE programs is a significant reduction in power shortages, which might make these programs politically acceptable even if tariffs increase. To increase political support, utilities could pursue programs that would result in minimal tariff increases. This can be achieved in four ways: (a) focus only on low-cost programs (such as replacing electric water heaters with gas water heaters); (b) sell power conserved through the EE program to the market at a price higher than the cost of peak power purchase; (c) focusmore » on programs where a partial utility subsidy of incremental capital cost might work and (d) increase the number of participant consumers by offering a basket of EE programs to fit all consumer subcategories and tariff tiers. Large scale EE programs can result in consistently negative cash flows and significantly erode the utility's overall profitability. In case the utility is facing shortages, the cash flow is very sensitive to the marginal tariff of the unmet demand. This will have an important bearing on the choice of EE programs in Indian states where low-paying rural and agricultural consumers form the majority of the unmet demand. These findings clearly call for a flexible, sustainable solution to the cash-flow management issue. One option is to include a mechanism like FAC in the utility incentive mechanism. Another sustainable solution might be to have the net program cost and revenue loss built into utility's revenue requirement and thus into consumer tariffs up front. However, the latter approach requires institutionalization of EE as a resource. The utility incentive mechanisms would be able to address the utility disincentive of forgone long-run return but have a minor impact on consumer benefits. Fundamentally, providing incentives for EE programs to make them comparable to supply-side investments

Building America Case Study: Design Guidance for Passive Vents in New Construction Multifamily Buildings, New York, New York

DOE Office of Scientific and Technical Information (OSTI.GOV)

2016-02-01

This document addresses the use of passive vents as a source of outdoor air in multifamily buildings. The challenges associated with implementing passive vents and the factors affecting performance are outlined. A comprehensive design methodology and quantified performance metrics are provided. Two hypothetical design examples are provided to illustrate the process. This document is intended to be useful to designers, decision-makers, and contractors implementing passive ventilation strategies. It is also intended to be a resource for those responsible for setting high-performance building program requirements, especially pertaining to ventilation and outdoor air. To ensure good indoor air quality, a dedicated sourcemore » of outdoor air is an integral part of high-performance buildings. Presently, there is a lack of guidance pertaining to the design and installation of passive vents, resulting in poor system performance. This report details the criteria necessary for designing, constructing, and testing passive vent systems to enable them to provide consistent and reliable levels of ventilation air from outdoors.« less

A discrete choice experiment to obtain a tariff for valuing informal care situations measured with the CarerQol instrument.

PubMed

Hoefman, Renske J; van Exel, Job; Rose, John M; van de Wetering, E J; Brouwer, Werner B F

2014-01-01

Economic evaluations adopting a societal perspective need to include informal care whenever relevant. However, in practice, informal care is often neglected, because there are few validated instruments to measure and value informal care for inclusion in economic evaluations. The CarerQol, which is such an instrument, measures the impact of informal care on 7 important burden dimensions (CarerQol-7D) and values this in terms of general quality of life (CarerQol-VAS). The objective of the study was to calculate utility scores based on relative utility weights for the CarerQol-7D. These tariffs will facilitate inclusion of informal care in economic evaluations. The CarerQol-7D tariff was derived with a discrete choice experiment conducted as an Internet survey among the general adult population in the Netherlands (N = 992). The choice set contained 2 unlabeled alternatives described in terms of the 7 CarerQol-7D dimensions (level range: "no,"some," and "a lot"). An efficient experimental design with priors obtained from a pilot study (N = 104) was used. Data were analyzed with a panel mixed multinomial parameter model including main and interaction effects of the attributes. The utility attached to informal care situations was significantly higher when this situation was more attractive in terms of fewer problems and more fulfillment or support. The interaction term between the CarerQol-7D dimensions physical health and mental health problems also significantly explained this utility. The tariff was constructed by adding up the relative utility weights per category of all CarerQol-7D dimensions and the interaction term. We obtained a tariff providing standard utility scores for caring situations described with the CarerQol-7D. This facilitates the inclusion of informal care in economic evaluations.

77 FR 45599 - CED Rock Springs, Inc.; Supplemental Notice That Revised Market-Based Rate Tariff Filing Includes...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-01

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket Nos. ER02-2546-000; ER02-2546-001] CED Rock Springs, Inc.; Supplemental Notice That Revised Market- Based Rate Tariff Filing...-referenced proceeding of CED Rock Springs, Inc.'s tariff revision filing, noting that such filing includes a...

Availability Based Tariff and its impact On different Industry Players-A Review

NASA Astrophysics Data System (ADS)

Holmukhe, R. M.; Pawar, Yogini; Desai, R. S.; Hasarmani, T. S.

2010-10-01

ABT is a performance-based tariff for the supply of electricity by generators owned and controlled by the central government. It is also a new system of scheduling and dispatch, which requires both generators and beneficiaries to commit to day-ahead schedules. It is a system of rewards and penalties seeking to enforce day ahead pre-committed schedules, though variations are permitted if notified One and one half hours in advance. The order emphasizes prompt payment of dues. ABT (Availability Based Tariff) along with the Electricity Act of 2003 is perhaps the most significant and definitive step taken in the Indian power sector so far to bring more efficiency and focus to this vital infrastructure. The ABT mechanism is based on financial principles. ABT scheme is for unscheduled interchange of power. The paper reviews ABT issues, its components, clauses, mechanism, benefits and the impact of grid on different players like generation utilities, grid operator, consumers involved in power generation, transmission and distribution. While the proposed tariff structure has wide implications for each player, this deals exclusively with the technology challenges/opportunities thrown up by ABT.

Architecture earth-sheltered buildings: Design Manual 1.4

NASA Astrophysics Data System (ADS)

1984-03-01

Design guidance is presented for use by experienced engineers and architects. The types of buildings within the scope of this manual include slab-on-grade, partially-buried (bermed) or fully-buried, and large (single-story or multistory) structures. New criteria unique to earth-sheltered design are included for the following disciplines: Planning, Landscape Design, Life-Cycle Analysis, Architectural, Structural, Mechanical (criteria include below-grade heat flux calculation procedures), and Electrical.

Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

CROWE, R.D.; PIEPHO, M.G.

2000-03-23

This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

Energy efficiency design strategies for buildings with grid-connected photovoltaic systems

NASA Astrophysics Data System (ADS)

Yimprayoon, Chanikarn

The building sector in the United States represents more than 40% of the nation's energy consumption. Energy efficiency design strategies and renewable energy are keys to reduce building energy demand. Grid-connected photovoltaic (PV) systems installed on buildings have been the fastest growing market in the PV industry. This growth poses challenges for buildings qualified to serve in this market sector. Electricity produced from solar energy is intermittent. Matching building electricity demand with PV output can increase PV system efficiency. Through experimental methods and case studies, computer simulations were used to investigate the priorities of energy efficiency design strategies that decreased electricity demand while producing load profiles matching with unique output profiles from PV. Three building types (residential, commercial, and industrial) of varying sizes and use patterns located in 16 climate zones were modeled according to ASHRAE 90.1 requirements. Buildings were analyzed individually and as a group. Complying with ASHRAE energy standards can reduce annual electricity consumption at least 13%. With energy efficiency design strategies, the reduction could reach up to 65%, making it possible for PV systems to meet reduced demands in residential and industrial buildings. The peak electricity demand reduction could be up to 71% with integration of strategies and PV. Reducing lighting power density was the best single strategy with high overall performances. Combined strategies such as zero energy building are also recommended. Electricity consumption reductions are the sum of the reductions from strategies and PV output. However, peak electricity reductions were less than their sum because they reduced peak at different times. The potential of grid stress reduction is significant. Investment incentives from government and utilities are necessary. The PV system sizes on net metering interconnection should not be limited by legislation existing in

RADON PREVENTION IN THE DESIGN & CONSTRUCTION OF SCHOOLS & OTHER LARGE BUILDINGS

EPA Science Inventory

It is typically easier and much less expensive to design and construct a new building with radon-resistant and/or easy-to-mitigate features, than to add these features after the building is completed and occupied. Therefore, when building in an area with the potential for elevate...

77 FR 21762 - ReEnergy Livermore Falls LLC; Supplemental Notice That Revised Market-Based Rate Tariff Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-11

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER12-1432-000] ReEnergy Livermore Falls LLC; Supplemental Notice That Revised Market-Based Rate Tariff Filing Includes Request for Blanket Section 204 Authorization This is a supplemental notice in the above-referenced proceeding of ReEnergy Livermore Falls LLC's tariff...

Comparison of EQ-5D-5L health state utilities using four country-specific tariffs on a breast cancer patient sample in mainland China.

PubMed

Liu, Liu; Li, Shunping; Wang, Min; Chen, Gang

2017-01-01

The objective of this study was to compare the differences in the five-level EuroQol-5 dimensions (EQ-5D-5L) health state utility scores derived from Chinese, Japanese, Korean, and UK tariffs. Six hundred and twenty-one breast cancer patients were invited for a face-to-face interview in Qingdao Municipal Hospital, China. EQ-5D-5L was scored using tariffs from China, Japan, Korea, and the UK. The null hypothesis of normal distribution of the EQ-5D-5L utility score was tested by the Shapiro-Wilk test. Nonparametric Friedman test and Wilcoxon signed-rank test were used to determine the difference among the four tariffs. The intraclass correlation coefficients (ICCs) and Bland-Altman plots were used to study the agreement among the four EQ-5D-5L scores. Known-groups validity was studied using a regression framework. There were 608 participants in the final analysis, with a mean ± standard deviation (SD) age of 48.0±9.6 years. EQ-5D-5L utility scores were non-normally distributed. The means (median) ± SD of EQ-5D-5L utilities derived from Chinese, Japanese, Korean, and UK tariffs were 0.828 (0.879) ±0.184, 0.802 (0.823) ±0.164, 0.831 (0.829) ±0.137, and 0.838 (0.866) ±0.154, respectively. Among pairwise comparisons, the difference of median EQ-5D-5L utility scores was only insignificant between Chinese and UK tariffs. Excellent agreements (with ICCs >0.9) were found among the four tariffs albeit the limits of agreement between each pair of tariffs were wide. Known-groups validity was supported. Although four country-specific EQ-5D-5L tariffs have shown an overall high level of correlation and agreement, none of them could be regarded as interchangeable. The higher correlation and agreement between Chinese and UK tariffs may be due to the similar functions that were used in the tariff development. In the absence of Chinese-specific tariff, the UK tariff is the second-best option to be applied in the Chinese population. Results of this study further contribute to

Design New Buildings To Save Energy -- and Money

ERIC Educational Resources Information Center

Rittelmann, Richard

1974-01-01

Buildings should be designed so that energy systems function with maximum efficiency. Re-evaluation of standards for ventilation and lighting is recommended. Heat recovery techniques and topography can reduce heating loads. (MF)

Esprit de Place: Maintaining and Designing Library Buildings To Provide Transcendent Spaces.

ERIC Educational Resources Information Center

Demas, Sam; Scherer, Jeffrey A.

2002-01-01

Discusses library buildings and their role in building community. Reviews current design trends, including reading and study spaces; collaborative workspaces; technology-free zones; archives and special collections; cultural events spaces; age-specific spaces; shared spaces; natural light and landscapes; and interior design trends. (LRW)

Chapter 4: Lateral design of cross-laminated timber buildings

Treesearch

John W. van de Lindt; Douglas Rammer; Marjan Popovski; Phil Line; Shiling Pei; Steven E. Pryor

2013-01-01

Cross-laminated timber (CLT) is an innovative wood product that was developed approximately two decades ago in Europe and has since been gaining in popularity. Based on the experience of European researchers and designers, it is believed that CLT can provide the U.S. market the opportunity to build mid- and high-rise wood buildings. This Chapter presents a summary of...

23 CFR 636.116 - What organizational conflict of interest requirements apply to design-build projects?

Code of Federal Regulations, 2011 CFR

2011-04-01

... apply to design-build projects? 636.116 Section 636.116 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.116 What organizational conflict of interest requirements apply to design-build projects? (a) State...

23 CFR 636.116 - What organizational conflict of interest requirements apply to design-build projects?

Code of Federal Regulations, 2014 CFR

2014-04-01

... apply to design-build projects? 636.116 Section 636.116 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.116 What organizational conflict of interest requirements apply to design-build projects? (a) State...

23 CFR 636.116 - What organizational conflict of interest requirements apply to design-build projects?

Code of Federal Regulations, 2012 CFR

2012-04-01

... apply to design-build projects? 636.116 Section 636.116 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.116 What organizational conflict of interest requirements apply to design-build projects? (a) State...

23 CFR 636.116 - What organizational conflict of interest requirements apply to design-build projects?

Code of Federal Regulations, 2013 CFR

2013-04-01

... apply to design-build projects? 636.116 Section 636.116 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.116 What organizational conflict of interest requirements apply to design-build projects? (a) State...

Dutch Tariff for the Five-Level Version of EQ-5D.

PubMed

M Versteegh, Matthijs; M Vermeulen, Karin; M A A Evers, Silvia; de Wit, G Ardine; Prenger, Rilana; A Stolk, Elly

2016-06-01

In 2009, a new version of the EuroQol five-dimensional questionnaire (EQ-5D) was introduced with five rather than three answer levels per dimension. This instrument is known as the EQ-5D-5L. To make the EQ-5D-5L suitable for use in economic evaluations, societal values need to be attached to all 3125 health states. To derive a Dutch tariff for the EQ-5D-5L. Health state values were elicited during face-to-face interviews in a general population sample stratified for age, sex, and education, using composite time trade-off (cTTO) and a discrete choice experiment (DCE). Data were modeled using ordinary least squares and tobit regression (for cTTO) and a multinomial conditional logit model (for DCE). Model performance was evaluated on the basis of internal consistency, parsimony, goodness of fit, handling of left-censored values, and theoretical considerations. A representative sample (N = 1003) of the Dutch population participated in the valuation study. Data of 979 and 992 respondents were included in the analysis of the cTTO and the DCE, respectively. The cTTO data were left-censored at -1. The tobit model was considered the preferred model for the tariff on the basis of its handling of the censored nature of the data, which was confirmed through comparison with the DCE data. The predicted values for the EQ-5D-5L ranged from -0.446 to 1. This study established a Dutch tariff for the EQ-5D-5L on the basis of cTTO. The values represent the preferences of the Dutch population. The tariff can be used to estimate the impact of health care interventions on quality of life, for example, in context of economic evaluations. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Design and optimization of zero-energy-consumption based solar energy residential building systems

NASA Astrophysics Data System (ADS)

Zheng, D. L.; Yu, L. J.; Tan, H. W.

2017-11-01

Energy consumption of residential buildings has grown fast in recent years, thus raising a challenge on zero energy residential building (ZERB) systems, which aim at substantially reducing energy consumption of residential buildings. Thus, how to facilitate ZERB has become a hot but difficult topic. In the paper, we put forward the overall design principle of ZERB based on analysis of the systems’ energy demand. In particular, the architecture for both schematic design and passive technology is optimized and both energy simulation analysis and energy balancing analysis are implemented, followed by committing the selection of high-efficiency appliance and renewable energy sources for ZERB residential building. In addition, Chinese classical residential building has been investigated in the proposed case, in which several critical aspects such as building optimization, passive design, PV panel and HVAC system integrated with solar water heater, Phase change materials, natural ventilation, etc., have been taken into consideration.

Healthy Building Design for the Commercial, Industrial, and Institutional Marketplace.

ERIC Educational Resources Information Center

Turner, William A.

Building design and construction that helps deliver both superior air quality and occupant thermal comfort, while minimizing energy consumption, are examined. The paper explores an integrated building systems approach that combines the principles of "directed air flow control" and "demand controlled ventilation" where ventilation is effectively…

Do active design buildings change health behaviour and workplace perceptions?

PubMed

Engelen, L; Dhillon, H M; Chau, J Y; Hespe, D; Bauman, A E

2016-07-01

Occupying new, active design office buildings designed for health promotion and connectivity provides an opportunity to evaluate indoor environment effects on healthy behaviour, sedentariness and workplace perceptions. To determine if moving to a health-promoting building changed workplace physical activity, sedentary behaviour, workplace perceptions and productivity. Participants from four locations at the University of Sydney, Australia, relocated into a new active design building. After consent, participants completed an online questionnaire 2 months before moving and 2 months after. Questions related to health behaviours (physical activity and sitting time), musculoskeletal issues, perceptions of the office environment, productivity and engagement. There were 34 participants (60% aged 25-45, 78% female, 84% employed full-time); 21 participants provided complete data. Results showed that after the move participants spent less work time sitting (83-70%; P < 0.01) and more time standing (9-21%; P < 0.01), while walking time remained unchanged. Participants reported less low back pain (P < 0.01). Sixty per cent of participants in the new workplace were in an open-plan office, compared to 16% before moving. Participants perceived the new work environment as more stimulating, better lit and ventilated, but noisier and providing less storage. No difference was reported in daily physical activity, number of stairs climbed or productivity. Moving to an active design building appeared to have physical health-promoting effects on workers, but workers' perceptions about the new work environment varied. These results will inform future studies in other new buildings. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

78 FR 18334 - New York Independent System Operator, Inc.; Notice of Motion for Tariff Waiver and Expedited Action

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER13-1124-000] New York Independent System Operator, Inc.; Notice of Motion for Tariff Waiver and Expedited Action On March 15, 2013, New York Independent System Operator, Inc. (NYISO) filed a motion for limited tariff waivers of...

Communications Satellite Tariffs for Television. IBI Monograph Number 3.

ERIC Educational Resources Information Center

Passell, Peter; Ross, Leonard

Dealing with the experiences of and the conditions for international and intercontinental satellite transmissions as they have been carried out during the past decade, this paper focuses on the rules and practices applied within the Intelsat system. The purpose of the paper is to explore the issues involved in establishing tariffs in accord with…

36 CFR 401.5 - Control and supervision of materials, design, and building.

Code of Federal Regulations, 2014 CFR

2014-07-01

... MONUMENTS COMMISSION MONUMENTS AND MEMORIALS § 401.5 Control and supervision of materials, design, and building. The Commission controls the design and prescribes regulations for the building of all memorial... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Control and supervision of...

36 CFR 401.5 - Control and supervision of materials, design, and building.

Code of Federal Regulations, 2011 CFR

2011-07-01

... MONUMENTS COMMISSION MONUMENTS AND MEMORIALS § 401.5 Control and supervision of materials, design, and building. The Commission controls the design and prescribes regulations for the building of all memorial... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Control and supervision of...

36 CFR 401.5 - Control and supervision of materials, design, and building.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MONUMENTS COMMISSION MONUMENTS AND MEMORIALS § 401.5 Control and supervision of materials, design, and building. The Commission controls the design and prescribes regulations for the building of all memorial... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Control and supervision of...

36 CFR 401.5 - Control and supervision of materials, design, and building.

Code of Federal Regulations, 2012 CFR

2012-07-01

... MONUMENTS COMMISSION MONUMENTS AND MEMORIALS § 401.5 Control and supervision of materials, design, and building. The Commission controls the design and prescribes regulations for the building of all memorial... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Control and supervision of...

US Green Building Council's Leadership in Energy and Environmental Design (LEED®)

EPA Pesticide Factsheets

A series of rating systems aimed at increasing the environmental and health performance of buildings' sites and structures and of neighborhoods. LEED® covers the design, construction, and operations of all types of buildings.

School Building Design and Audio-Visual Resources.

ERIC Educational Resources Information Center

National Committee for Audio-Visual Aids in Education, London (England).

The design of new schools should facilitate the use of audiovisual resources by ensuring that the materials used in the construction of the buildings provide adequate sound insulation and acoustical and viewing conditions in all learning spaces. The facilities to be considered are: electrical services; electronic services; light control and…

18 CFR 154.112 - Exception to form and composition of tariff.

Code of Federal Regulations, 2011 CFR

2011-04-01

... contain a table of contents which is incorporated as a sheet or section in the open access transmission... referenced in the open access transmission tariff. [Order 582, 60 FR 52996, Oct. 11, 1995, as amended by...

75 FR 63468 - Notice of Revocation of Market-Based Rate Tariff

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... market-based rate tariffs. \\1\\ Electric Quarterly Reports, 132 FERC ] 61,251 (2010) (September 22 Order.... Kimberly D. Bose, Secretary. [FR Doc. 2010-25955 Filed 10-14-10; 8:45 am] BILLING CODE 6717-01-P ...

Interpretive Research Aiming at Theory Building: Adopting and Adapting the Case Study Design

ERIC Educational Resources Information Center

Diaz Andrade, Antonio

2009-01-01

Although the advantages of case study design are widely recognised, its original positivist underlying assumptions may mislead interpretive researchers aiming at theory building. The paper discusses the limitations of the case study design for theory building and explains how grounded theory systemic process adds to the case study design. The…

48 CFR 36.301 - Use of two-phase design-build selection procedures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Use of two-phase design-build selection procedures. 36.301 Section 36.301 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Two-Phase Design-Build Selection Procedures 36.301...

75 FR 53013 - Fiscal Year 2011 Tariff-rate Quota Allocations for Raw Cane Sugar, Refined and Specialty Sugar...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

... for Raw Cane Sugar, Refined and Specialty Sugar, and Sugar-containing Products; Revision AGENCY... August 17, 2010 concerning Fiscal Year 2011 tariff-rate quota allocations of raw cane sugar, refined and... announced that sugar entering the United States under the Fiscal Year 2011 raw sugar tariff-rate quota will...

Effect of A-Level Subject Choice and Entry Tariff on Final Degree and Level 1 Performance in Biosciences

ERIC Educational Resources Information Center

King, Nicola C.; Aves, Stephen J.

2012-01-01

Following the publication of the higher education white paper increasing entry tariff and widening participation have become even more important issues for universities. This report examines the relationship between entry tariff and undergraduate achievement in Biosciences at the University of Exeter. We show that, whilst there is a significant…

78 FR 5775 - Notice of Allocation of Tariff Rate Quotas (TRQ) on the Import of Certain Worsted Wool Fabrics...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-28

... DEPARTMENT OF COMMERCE International Trade Administration Notice of Allocation of Tariff Rate... Trade Administration, Department of Commerce. ACTION: Notice of allocation of 2013 worsted wool fabric tariff rate quota. SUMMARY: The Department of Commerce (Department) has determined the allocation for...

Analysis of Design-Build Processes, Best Practices, and Applications to the Department of Defense

DTIC Science & Technology

2006-06-01

NAVFAC design-build processes published in trade journals, books , magazines, internet articles, and DoD policy. In their book , Contract Management...literature review concentrates on recent articles published in books , trade magazines, and on the internet to determine design-build processes and...Keith Molenaar ) Design-build projects under the State of California’s Public Contract Code (Legaltips.org, 2006) requires the owner, for example the

19 CFR 102.20 - Specific rules by tariff classification.

Code of Federal Regulations, 2010 CFR

2010-04-01

...; DEPARTMENT OF THE TREASURY RULES OF ORIGIN Rules of Origin § 102.20 Specific rules by tariff classification. The following rules are the rules specified in § 102.11(a)(3) and other sections of this part. Where a rule under this section permits a change to a subheading from another subheading of the same heading...

Designing Knowledge Building Communities in Secondary Schools

ERIC Educational Resources Information Center

Lai, Kwok-Wing

2014-01-01

In 2012-2013, sixteen senior secondary classes participated in this study, with eight of them being distance classes. Approximately 220 Year 11-13 students and 8 teachers took part in this study. This project aimed at designing and evaluating a computer-supported knowledge building community in senior secondary classes. Researchers sought to…

Design as a Social Practice: The Design of New Build Schools

ERIC Educational Resources Information Center

Daniels, Harry; Tse, Hau Ming; Stables, Andrew; Cox, Sarah

2017-01-01

In this paper we present the findings of an investigation into the ways in which the discourses and practices of school design produce educational spaces which influence the discourses and practices of teaching and learning when the building is occupied. It expands notions of post occupancy evaluation (POE) research by exploring how the…

Building Design Guidelines for Solar Energy Technologies

DOE R&D Accomplishments Database

Givoni, B.

1989-01-01

There are two main objectives to this publication. The first is to find out the communalities in the experience gained in previous studies and in actual applications of solar technologies in buildings, residential as well as nonresidential. The second objective is to review innovative concepts and products which may have an impact on future developments and applications of solar technologies in buildings. The available information and common lessons were collated and presented in a form which, hopefully, is useful for architects and solar engineers, as well as for teachers of "solar architecture" and students in Architectural Schools. The publication is based mainly on the collection and analysis of relevant information. The information included previous studies in which the performance of solar buildings was evaluated, as well as the personal experience of the Author and the research consultants. The state of the art, as indicated by these studies and personal experience, was summarized and has served as basis for the development of the Design Guidelines. In addition to the summary of the state of the art, as was already applied in solar buildings, an account was given of innovative concepts and products. Such innovations have occurred in the areas of thermal storage by Phase Change Materials (PCM) and in glazing with specialized or changeable properties. Interesting concepts were also developed for light transfer, which may enable to transfer sunlight to the core areas of large multi story nonresidential buildings. These innovations may have a significant impact on future developments of solar technologies and their applications in buildings.

Multi-Hierarchical Gray Correlation Analysis Applied in the Selection of Green Building Design Scheme

NASA Astrophysics Data System (ADS)

Wang, Li; Li, Chuanghong

2018-02-01

As a sustainable form of ecological structure, green building is widespread concerned and advocated in society increasingly nowadays. In the survey and design phase of preliminary project construction, carrying out the evaluation and selection of green building design scheme, which is in accordance with the scientific and reasonable evaluation index system, can improve the ecological benefits of green building projects largely and effectively. Based on the new Green Building Evaluation Standard which came into effect on January 1, 2015, the evaluation index system of green building design scheme is constructed taking into account the evaluation contents related to the green building design scheme. We organized experts who are experienced in construction scheme optimization to mark and determine the weight of each evaluation index through the AHP method. The correlation degree was calculated between each evaluation scheme and ideal scheme by using multilevel gray relational analysis model and then the optimal scheme was determined. The feasibility and practicability of the evaluation method are verified by introducing examples.

Pricing for scarcity? An efficiency analysis of increasing block tariffs

NASA Astrophysics Data System (ADS)

Monteiro, Henrique; Roseta-Palma, Catarina

2011-06-01

Water pricing schedules often contain significant nonlinearities, such as the increasing block tariff (IBT) structure that is abundantly applied for residential users. The IBT is frequently supported as a good tool for achieving the goals of equity, water conservation, and revenue neutrality but seldom has been grounded on efficiency justifications. In particular, existing literature on water pricing establishes that although efficient schedules will depend on demand and supply characteristics, IBT cannot usually be recommended. In this paper, we consider whether the explicit inclusion of scarcity considerations can strengthen the appeal of IBT. Results show that when both demand and costs react to climate factors, increasing marginal prices may come about as a response to a combination of water scarcity and customer heterogeneity. We derive testable conditions and then illustrate their application through an estimation of Portuguese residential water demand. We show that the recommended tariff schedule hinges crucially on the choice of functional form for demand.

75 FR 22095 - USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2010 Raw Sugar Tariff...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-27

... USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2010 Raw Sugar Tariff-Rate... announced a reassignment of surplus sugar under domestic cane sugar allotments of 200,000 short tons raw value (STRV) to imports, and increased the fiscal year (FY) 2010 raw sugar tariff-rate quota (TRQ) by...

75 FR 38764 - USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2010 Raw Sugar Tariff...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-06

... USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2010 Raw Sugar Tariff-Rate... announced a reassignment of surplus sugar under domestic cane sugar allotments of 300,000 short tons raw value (STRV) to imports, and increased the fiscal year (FY) 2010 raw sugar tariff-rate quota (TRQ) by...

76 FR 20305 - USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2011 Raw Sugar Tariff...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

... USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2011 Raw Sugar Tariff-Rate... announced a reassignment of surplus sugar under domestic cane sugar allotments of 325,000 short tons raw value (STRV) to imports, and increased the fiscal year (FY) 2011 raw sugar tariff-rate quota (TRQ) by...

76 FR 50285 - Fiscal Year 2012 Tariff-Rate Quota Allocations for Raw Cane Sugar, Refined and Specialty Sugar...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-12

... for Raw Cane Sugar, Refined and Specialty Sugar and Sugar-Containing Products AGENCY: Office of the... quantity of the tariff-rate quotas for imported raw cane sugar, refined and specialty sugar and sugar...), the United States maintains tariff-rate quotas (TRQs) for imports of raw cane sugar and refined sugar...

Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Wei; Gowri, Krishnan; Lane, Michael D.

2009-09-28

This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

Assessment of seismic design response factors of concrete wall buildings

NASA Astrophysics Data System (ADS)

Mwafy, Aman

2011-03-01

To verify the seismic design response factors of high-rise buildings, five reference structures, varying in height from 20- to 60-stories, were selected and designed according to modern design codes to represent a wide range of concrete wall structures. Verified fiber-based analytical models for inelastic simulation were developed, considering the geometric nonlinearity and material inelasticity of the structural members. The ground motion uncertainty was accounted for by employing 20 earthquake records representing two seismic scenarios, consistent with the latest understanding of the tectonic setting and seismicity of the selected reference region (UAE). A large number of Inelastic Pushover Analyses (IPAs) and Incremental Dynamic Collapse Analyses (IDCAs) were deployed for the reference structures to estimate the seismic design response factors. It is concluded that the factors adopted by the design code are adequately conservative. The results of this systematic assessment of seismic design response factors apply to a wide variety of contemporary concrete wall buildings with various characteristics.

Sustainable Skyscrapers: Designing the Net Zero Energy Building of the Future

NASA Astrophysics Data System (ADS)

Kothari, S.; Bartsch, A.

2016-12-01

Cities of the future will need to increase population density in order to keep up with the rising populations in the limited available land area. In order to provide sufficient power as the population grows, cities must become more energy efficient. Fossil fuels and grid energy will continue to become more expensive as nonrenewable resources deplete. The obvious solution to increase population density while decreasing the reliance on fossil fuels is to build taller skyscrapers that are energy neutral, i.e. self-sustaining. However, current skyscrapers are not energy efficient, and therefore cannot provide a sustainable solution to the problem of increasing population density in the face of depleting energy resources. The design of a net zero energy building that includes both residential and commercial space is presented. Alternative energy systems such as wind turbines, photovoltaic cells, and a waste-to-fuel conversion plant have been incorporated into the design of a 50 story skyscraper that is not reliant on fossil fuels and has a payback time of about six years. Although the current building was designed to be located in San Francisco, simple modifications to the design would allow this building to fit the needs of any city around the world.

Towards an Interdisciplinary Model of Practice for Participatory Building Design in Education

ERIC Educational Resources Information Center

Könings, Karen D.; Bovill, Catherine; Woolner, Pamela

2017-01-01

It is recognised that educational environments influence learning experiences, so it is important to ensure that educational buildings are designed to be fit for purpose. In order to ensure that educational buildings meet the needs of those who use them, all relevant stakeholders should be involved in the design process. However, this is not…

Creative Building Design for Innovative Earth Science Teaching and Outreach (Invited)

NASA Astrophysics Data System (ADS)

Chan, M. A.

2009-12-01

Earth Science departments can blend the physical “bricks and mortar” facility with programs and educational displays to create a facility that is a permanent outreach tool and a welcoming home for teaching and research. The new Frederick Albert Sutton building at the University of Utah is one of the first LEED (Leadership in Energy and Environmental Design) certified Earth Science buildings in the country. Throughout the structure, creative architectural designs are combined with sustainability, artful geologic displays, and community partnerships. Distinctive features of the building include: 1) Unique, inviting geologic designs such as cross bedding pattern in the concrete foundation; “a river runs through it” (a pebble tile “stream” inside the entrance); “confluence” lobby with spectacular Eocene Green River fossil fish and plant walls; polished rock slabs; and many natural stone elements. All displays are also designed as teaching tools. 2) Student-generated, energy efficient, sustainable projects such as: solar tube lights, xeriscape & rock monoliths, rainwater collection, roof garden, pervious cement, and energy monitoring. 3) Reinforced concrete foundation for vibration-free analytical measurements, and exposed lab ceilings for duct work and infrastructure adaptability. The spectacular displays for this special project were made possible by new partnerships within the community. Companies participated with generous, in-kind donations (e.g., services, stone flooring and slabs, and landscape rocks). They received recognition in the building and in literature acknowledging donors. A beautiful built environment creates space that students, faculty, and staff are proud of. People feel good about coming to work, and they are happy about their surroundings. This makes a strong recruiting tool, with more productive and satisfied employees. Buildings with architectural interest and displays can showcase geology as art and science, while highlighting

18 CFR 35.28 - Non-discriminatory open access transmission tariff.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Non-discriminatory open access transmission tariff. 35.28 Section 35.28 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT FILING OF RATE SCHEDULES...

77 FR 57180 - Fiscal Year 2013 Tariff-rate Quota Allocations for Raw Cane Sugar, Refined and Specialty Sugar...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... OFFICE OF THE TRADE REPRESENTATIVE Fiscal Year 2013 Tariff-rate Quota Allocations for Raw Cane... quantity of the tariff-rate quotas for imported raw cane sugar, refined and specialty sugar, and sugar... imports of raw cane sugar and refined sugar. Pursuant to Additional U.S. Note 8 to Chapter 17 of the HTS...

78 FR 46565 - Assessment of Fees for Dairy Import Licenses for the 2014 Tariff-Rate Import Quota Year

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

... Service Assessment of Fees for Dairy Import Licenses for the 2014 Tariff- Rate Import Quota Year AGENCY... charged for the 2014 tariff-rate quota (TRQ) year for each license issued to a person or firm by the... 2014 calendar year. Notice: The total cost to the Department of Agriculture of administering the...

BEYOND GREEN BUILDINGS: AN INTEGRATED HOLISTIC DESIGN APPROACH

EPA Science Inventory

Technical Challenge: The Urban Sustainable Infrastructure Engineering Program (USIEP) at the University of Colorado at Denver is designing a Sustainable Youth Zone (SYZ) building in a disadvantaged community in Commerce City, CO. The SYZ utilizes a holistic ...

Research on Estimates of Xi’an City Life Garbage Pay-As-You-Throw Based on Two-part Tariff method

NASA Astrophysics Data System (ADS)

Yaobo, Shi; Xinxin, Zhao; Fuli, Zheng

2017-05-01

Domestic waste whose pricing can’t be separated from the pricing of public economics category is quasi public goods. Based on Two-part Tariff method on urban public utilities, this paper designs the pricing model in order to match the charging method and estimates the standard of pay-as-you-throw using data of the past five years in Xi’an. Finally, this paper summarizes the main results and proposes corresponding policy recommendations.

Fault-tolerant computer study. [logic designs for building block circuits

NASA Technical Reports Server (NTRS)

Rennels, D. A.; Avizienis, A. A.; Ercegovac, M. D.

1981-01-01

A set of building block circuits is described which can be used with commercially available microprocessors and memories to implement fault tolerant distributed computer systems. Each building block circuit is intended for VLSI implementation as a single chip. Several building blocks and associated processor and memory chips form a self checking computer module with self contained input output and interfaces to redundant communications buses. Fault tolerance is achieved by connecting self checking computer modules into a redundant network in which backup buses and computer modules are provided to circumvent failures. The requirements and design methodology which led to the definition of the building block circuits are discussed.

23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.104 Does this part apply to all Federal-aid design-build projects? The...

18 CFR 35.28 - Non-discriminatory open access transmission tariff.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Non-discriminatory open access transmission tariff. 35.28 Section 35.28 Conservation of Power and Water Resources FEDERAL ENERGY.... (4) Demand response means a reduction in the consumption of electric energy by customers from their...

18 CFR 35.28 - Non-discriminatory open access transmission tariff.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Non-discriminatory open access transmission tariff. 35.28 Section 35.28 Conservation of Power and Water Resources FEDERAL ENERGY.... (4) Demand response means a reduction in the consumption of electric energy by customers from their...

The relationship between building design and residents' quality of life in extra care housing schemes.

PubMed

Orrell, Alison; McKee, Kevin; Torrington, Judith; Barnes, Sarah; Darton, Robin; Netten, Ann; Lewis, Alan

2013-05-01

Well-designed housing is recognised as being an important factor in promoting a good quality of life. Specialised housing models incorporating care services, such as extra care housing (ECH) schemes are seen as enabling older people to maintain a good quality of life despite increasing health problems that can accompany ageing. Despite the variation in ECH building design little is known about the impact of ECH building design on the quality of life of building users. The evaluation of older people's living environments (EVOLVE) study collected cross-sectional data on building design and quality of life in 23 ECH schemes in England, UK. Residents' quality of life was assessed using the schedule for the evaluation of individual quality of life-direct weighting (SEIQoL-DW) and on the four domains of control, autonomy, self-realisation and pleasure on the CASP-19. Building design was measured on 12 user-related domains by means of a new tool; the EVOLVE tool. Using multilevel linear regression, significant associations were found between several aspects of building design and quality of life. Furthermore, there was evidence that the relationship between building design and quality of life was partly mediated by the dependency of participants and scheme size (number of living units). Our findings suggest that good quality building design in ECH can support the quality of life of residents, but that designing features that support the needs of both relatively independent and frail users is problematic, with the needs of highly dependent users not currently supported as well as could be hoped by ECH schemes. Copyright © 2013 Elsevier Ltd. All rights reserved.

Designing Opportunities to Learn Mathematics Theory-Building Practices

ERIC Educational Resources Information Center

Bass, Hyman

2017-01-01

Mathematicians commonly distinguish two modes of work in the discipline: "Problem solving," and "theory building." Mathematics education offers many opportunities to learn problem solving. This paper explores the possibility, and value, of designing instructional activities that provide supported opportunities for students to…

Energy-efficient building design in cold climates: Schools as a case study

NASA Astrophysics Data System (ADS)

Rangel Ruiz, Rocio

Buildings account for great amounts of greenhouse gas emissions. In terms of energy, buildings account for one third of the total amount of energy used in the country every year! Schools account for 14 percent of the energy used annually in commercial and institutional buildings. Further, schools are one of the most commonly constructed building types in Canada and spaces such as classrooms are often duplicated. This makes them preferred candidates for the research that was undertaken where energy-efficient solutions that can be transferred to different school designs were derived. Throughout the study, the Commercial Building Incentive Program (CBIP) was used as a benchmark. The objectives of the study were to demonstrate energy-efficient concepts, provide a case study to evaluate solutions, develop typological models and provide an understanding of the innovation process. The technological and societal aspects of the energy-efficient design were addressed. With respect to the technological aspects, the first step was the analysis of conventional design using a school in Calgary as a case study. The optimization of conventional design was undertaken using computer modeling to identify best practice solutions. Aspects that were included in the studies were lighting design, envelope characteristics, HVAC systems and building plant systems. The inclusion of passive design included the analysis of daylighting and natural ventilation. Computer modeling was used to assess daylighting in classrooms with unilateral and bilateral daylighting. Illuminance levels, glare and light distribution were evaluated. The study of natural ventilation was undertaken using literature review. Airflow and outdoor temperatures were the focus to identify solutions that could be incorporated into the design of classrooms. It was concluded that achieving excellence in energy efficiency in schools could be achieved using readily available technologies. Energy savings of up to 63 percent better

40 CFR 35.2036 - Design/build project grants.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and performing construction management and contract administration, will be in accordance with EPA..., responsible bid; (ii) A lump sum for construction management, contract and project administration services and... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works § 35.2036 Design/build...

40 CFR 35.2036 - Design/build project grants.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and performing construction management and contract administration, will be in accordance with EPA..., responsible bid; (ii) A lump sum for construction management, contract and project administration services and... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works § 35.2036 Design/build...

40 CFR 35.2036 - Design/build project grants.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and performing construction management and contract administration, will be in accordance with EPA..., responsible bid; (ii) A lump sum for construction management, contract and project administration services and... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works § 35.2036 Design/build...

Hygrothermal Simulation: A Tool for Building Envelope Design Analysis

Treesearch

Samuel V. Glass; Anton TenWolde; Samuel L. Zelinka

2013-01-01

Is it possible to gauge the risk of moisture problems while designing the building envelope? This article provides a brief introduction to computer-based hygrothermal (heat and moisture) simulation, shows how simulation can be useful as a design tool, and points out a number of im-portant considerations regarding model inputs and limita-tions. Hygrothermal simulation...

36 CFR § 401.5 - Control and supervision of materials, design, and building.

Code of Federal Regulations, 2013 CFR

2013-07-01

... BATTLE MONUMENTS COMMISSION MONUMENTS AND MEMORIALS § 401.5 Control and supervision of materials, design, and building. The Commission controls the design and prescribes regulations for the building of all... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Control and supervision of...

Building Units Design and Scale Chemistry

NASA Astrophysics Data System (ADS)

Férey, Gérard

2000-06-01

The concept of a building unit (BU) is used in two ways: the first is an a posteriori tool for description of structures which can be used to imagine new topologies originating from the description; the second one, restricted to the routes leading to the solid from the solution, starts from the reality of these building units in the solution to design new solids obtained by the tuned precipitation of these BUs with proper counterions. The room temperature and the hydrothermal routes are examined. The existence of BUs with different sizes with close topologies, revealed by numerous examples, leads us to define the notion of "scale chemistry" which concerns the edification of solids with various BUs, either organic, hybrid, or inorganic, and the consequences it has for the corresponding frameworks and the voids they generate. Not only the framework is important, and applications of the existence of large cavities are discussed. The paper ends with a discussion of the new trends which arise from this topological concept.

Effect of strong-column weak-beam design provision on the seismic fragility of RC frame buildings

NASA Astrophysics Data System (ADS)

Surana, Mitesh; Singh, Yogendra; Lang, Dominik H.

2018-04-01

Incremental dynamic analyses are conducted for a suite of low- and mid-rise reinforced-concrete special moment-resisting frame buildings. Buildings non-conforming and conforming to the strong-column weak-beam (SCWB) design criterion are considered. These buildings are designed for the two most severe seismic zones in India (i.e., zone IV and zone V) following the provisions of Indian Standards. It is observed that buildings non-conforming to the SCWB design criterion lead to an undesirable column failure collapse mechanism. Although yielding of columns cannot be avoided, even for buildings conforming to a SCWB ratio of 1.4, the observed collapse mechanism changes to a beam failure mechanism. This change in collapse mechanism leads to a significant increase in the building's global ductility capacity, and thereby in collapse capacity. The fragility analysis study of the considered buildings suggests that considering the SCWB design criterion leads to a significant reduction in collapse probability, particularly in the case of mid-rise buildings.

18 CFR 341.6 - Adoption of tariff by a successor.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Adoption of tariff by a successor. 341.6 Section 341.6 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... thereof, that has been adopted in the electronic format required by § 341.1 bearing the name of the...

Integrating Green Building Criteria Into Housing Design Processes Case Study: Tropical Apartment At Kebon Melati, Jakarta

NASA Astrophysics Data System (ADS)

Farid, V. L.; Wonorahardjo, S.

2018-05-01

The implementation of Green Building criteria is relatively new in architectural practice, especially in Indonesia. Consequently, the integration of these criteria into design process has the potential to change the design process itself. The implementation of the green building criteria into the conventional design process will be discussed in this paper. The concept of this project is to design a residential unit with a natural air-conditioning system. To achieve this purpose, the Green Building criteria has been implemented since the beginning of the design process until the detailing process on the end of the project. Several studies was performed throughout the design process, such as: (1) Conceptual review, where several professionally proved theories related to Tropical Architecture and passive design are used for a reference, and (2) Computer simulations, such as Computational Fluid Dynamics (CFD) and wind tunnel simulation, used to represent the dynamic response of the surrounding environment towards the building. Hopefully this paper may become a reference for designing a green residential building.

Global optimization framework for solar building design

NASA Astrophysics Data System (ADS)

Silva, N.; Alves, N.; Pascoal-Faria, P.

2017-07-01

The generative modeling paradigm is a shift from static models to flexible models. It describes a modeling process using functions, methods and operators. The result is an algorithmic description of the construction process. Each evaluation of such an algorithm creates a model instance, which depends on its input parameters (width, height, volume, roof angle, orientation, location). These values are normally chosen according to aesthetic aspects and style. In this study, the model's parameters are automatically generated according to an objective function. A generative model can be optimized according to its parameters, in this way, the best solution for a constrained problem is determined. Besides the establishment of an overall framework design, this work consists on the identification of different building shapes and their main parameters, the creation of an algorithmic description for these main shapes and the formulation of the objective function, respecting a building's energy consumption (solar energy, heating and insulation). Additionally, the conception of an optimization pipeline, combining an energy calculation tool with a geometric scripting engine is presented. The methods developed leads to an automated and optimized 3D shape generation for the projected building (based on the desired conditions and according to specific constrains). The approach proposed will help in the construction of real buildings that account for less energy consumption and for a more sustainable world.

NREL's OpenStudio Helps Design More Efficient Buildings (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2014-07-01

The National Renewable Energy Laboratory (NREL) has created the OpenStudio software platform that makes it easier for architects and engineers to evaluate building energy efficiency measures throughout the design process. OpenStudio makes energy modeling more accessible and affordable, helping professionals to design structures with lower utility bills and less carbon emissions, resulting in a healthier environment. OpenStudio includes a user-friendly application suite that makes the U.S. Department of Energy's EnergyPlus and Radiance simulation engines easier to use for whole building energy and daylighting performance analysis. OpenStudio is freely available and runs on Windows, Mac, and Linux operating systems.

Building energy analysis of Electrical Engineering Building from DesignBuilder tool: calibration and simulations

NASA Astrophysics Data System (ADS)

Cárdenas, J.; Osma, G.; Caicedo, C.; Torres, A.; Sánchez, S.; Ordóñez, G.

2016-07-01

This research shows the energy analysis of the Electrical Engineering Building, located on campus of the Industrial University of Santander in Bucaramanga - Colombia. This building is a green pilot for analysing energy saving strategies such as solar pipes, green roof, daylighting, and automation, among others. Energy analysis was performed by means of DesignBuilder software from virtual model of the building. Several variables were analysed such as air temperature, relative humidity, air velocity, daylighting, and energy consumption. According to two criteria, thermal load and energy consumption, critical areas were defined. The calibration and validation process of the virtual model was done obtaining error below 5% in comparison with measured values. The simulations show that the average indoor temperature in the critical areas of the building was 27°C, whilst relative humidity reached values near to 70% per year. The most critical discomfort conditions were found in the area of the greatest concentration of people, which has an average annual temperature of 30°C. Solar pipes can increase 33% daylight levels into the areas located on the upper floors of the building. In the case of the green roofs, the simulated results show that these reduces of nearly 31% of the internal heat gains through the roof, as well as a decrease in energy consumption related to air conditioning of 5% for some areas on the fourth and fifth floor. The estimated energy consumption of the building was 69 283 kWh per year.

40 CFR 35.2036 - Design/build project grants.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works § 35.2036 Design/build...) project grant provided that: (1) The proposed treatment works has an estimated total cost of $8 million or less; (2) The proposed treatment works is an aerated lagoon, trickling filter, waste stabilization pond...

Cyclone-Resistant Rural Primary School Construction - A Design Guide. Educational Building Report 7.

ERIC Educational Resources Information Center

Sinnamon, Ian T.; Loo, G. A. van't

One of a series of documents on design of disaster-resistant buildings, this publication treats construction of rural primary schools to resist destruction by wind and water from cyclones. Also appropriate for other buildings, material is aimed at rural primary schools because they are less likely to be professionally designed or supervised; the…

Effective Energy Simulation and Optimal Design of Side-lit Buildings with Venetian Blinds

NASA Astrophysics Data System (ADS)

Cheng, Tian

Venetian blinds are popularly used in buildings to control the amount of incoming daylight for improving visual comfort and reducing heat gains in air-conditioning systems. Studies have shown that the proper design and operation of window systems could result in significant energy savings in both lighting and cooling. However, there is no convenient computer tool that allows effective and efficient optimization of the envelope of side-lit buildings with blinds now. Three computer tools, Adeline, DOE2 and EnergyPlus widely used for the above-mentioned purpose have been experimentally examined in this study. Results indicate that the two former tools give unacceptable accuracy due to unrealistic assumptions adopted while the last one may generate large errors in certain conditions. Moreover, current computer tools have to conduct hourly energy simulations, which are not necessary for life-cycle energy analysis and optimal design, to provide annual cooling loads. This is not computationally efficient, particularly not suitable for optimal designing a building at initial stage because the impacts of many design variations and optional features have to be evaluated. A methodology is therefore developed for efficient and effective thermal and daylighting simulations and optimal design of buildings with blinds. Based on geometric optics and radiosity method, a mathematical model is developed to reasonably simulate the daylighting behaviors of venetian blinds. Indoor illuminance at any reference point can be directly and efficiently computed. They have been validated with both experiments and simulations with Radiance. Validation results show that indoor illuminances computed by the new models agree well with the measured data, and the accuracy provided by them is equivalent to that of Radiance. The computational efficiency of the new models is much higher than that of Radiance as well as EnergyPlus. Two new methods are developed for the thermal simulation of buildings. A

Evaluation of energy efficient design competition of a public office building in North Greece

NASA Astrophysics Data System (ADS)

Chatzimanoli, Asimina

Over the past few years in Greece there have been changes in the National Environmental and Energy Policy related to sustainability and energy conservation-saving, concerning the built environment as well. In this context, in 1999, the Hellenic Public Real Estate Corporation announced a Public Open Competition for the "Design and Construction" of a Police Station in the city of Kilkis, in North Greece. The energy efficiency and bioclimatic design was part of the General Design Principles of the brief. The following Report aims at evaluating the energy performance of the building and the comfort levels in the internal environment and determining the benefits of incorporating environmental design in a Public Office Building, in terms of savings in the energy consumption for heating. The Methodology included a description of the features of the design, analysis of the differences between the initial design and the constructed building, investigation of the operation of the constructed building (monitoring, questionnaire survey, energy consumption) and evaluation of the effect of the differences mentioned, using computer simulation (TAS software). Internal Temperatures fluctuated less than the external but for most of the monitoring period (end of mid-season-beginning of summer) Maximum Temperatures were higher than the external. The occupants gave positive comments and evaluated the general working conditions in the building as good, but the majority were not aware of the Passive Solar Systems installed in the building. The actual energy consumption for heating (150.85kWh/m2) is approximately 85% of the average consumption of Public Office Buildings in North Greece but 50% higher than that of recently built Public Office Buildings. However, the figure from the simulation analysis (corresponding to Office and Common spaces) is approximately 1/3 of the actual (55.14 kWh/m2), suggesting that proper operation of the building could result in significant reduction in energy

23 CFR 636.109 - How does the NEPA process relate to the design-build procurement process?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false How does the NEPA process relate to the design-build... TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.109 How does the NEPA process relate to the design-build procurement process? The purpose of this section is to ensure that...

23 CFR 636.109 - How does the NEPA process relate to the design-build procurement process?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false How does the NEPA process relate to the design-build... TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.109 How does the NEPA process relate to the design-build procurement process? The purpose of this section is to ensure that...

23 CFR 636.109 - How does the NEPA process relate to the design-build procurement process?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false How does the NEPA process relate to the design-build... TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.109 How does the NEPA process relate to the design-build procurement process? The purpose of this section is to ensure that...

23 CFR 636.109 - How does the NEPA process relate to the design-build procurement process?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false How does the NEPA process relate to the design-build... TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.109 How does the NEPA process relate to the design-build procurement process? The purpose of this section is to ensure that...

23 CFR 636.109 - How does the NEPA process relate to the design-build procurement process?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false How does the NEPA process relate to the design-build... TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.109 How does the NEPA process relate to the design-build procurement process? The purpose of this section is to ensure that...

75 FR 47258 - Determination of Total Amounts of Fiscal Year 2011 Tariff-Rate Quotas for Raw Cane Sugar and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-05

... Determination of Total Amounts of Fiscal Year 2011 Tariff-Rate Quotas for Raw Cane Sugar and Certain Sugars...) 2011 in-quota aggregate quantity of the raw, as well as, refined and specialty sugar Tariff-Rate Quotas (TRQ) as required under the U.S. World Trade Organization (WTO) commitments. The FY 2011 raw cane sugar...

77 FR 55451 - Determination of Total Amounts of Fiscal Year 2013 Tariff-Rate Quotas for Raw Cane Sugar and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-10

... Secretary Determination of Total Amounts of Fiscal Year 2013 Tariff-Rate Quotas for Raw Cane Sugar and...) 2013 (October 1, 2012-September 30, 2013) in-quota aggregate quantity of the raw, as well as, refined and specialty sugar Tariff-Rate Quotas (TRQ). The FY 2013 raw cane sugar TRQ is established at 1,117...

Design and Construction Process of Two LEED Certified University Buildings: A Collective Case Study

ERIC Educational Resources Information Center

Rich, Kim

2011-01-01

This study was conducted at the early stages of integrating LEED into the design process in which a clearer understanding of what sustainable and ecological design was about became evident through the duration of designing and building of two academic buildings on a university campus. In this case study, due to utilizing a grounded theory…

Optimal Technology Investment and Operation in Zero-Net-Energy Buildings with Demand Response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stadler , Michael; Siddiqui, Afzal; Marnay, Chris

The US Department of Energy has launched the Zero-Net-Energy (ZNE) Commercial Building Initiative (CBI) in order to develop commercial buildings that produce as much energy as they use. Its objective is to make these buildings marketable by 2025 such that they minimize their energy use through cutting-edge energy-efficient technologies and meet their remaining energy needs through on-site renewable energy generation. We examine how such buildings may be implemented within the context of a cost- or carbon-minimizing microgrid that is able to adopt and operate various technologies, such as photovoltaic (PV) on-site generation, heat exchangers, solar thermal collectors, absorption chillers, andmore » passive / demand-response technologies. We use a mixed-integer linear program (MILP) that has a multi-criteria objective function: the minimization of a weighted average of the building's annual energy costs and carbon / CO2 emissions. The MILP's constraints ensure energy balance and capacity limits. In addition, constraining the building's energy consumed to equal its energy exports enables us to explore how energy sales and demand-response measures may enable compliance with the CBI. Using a nursing home in northern California and New York with existing tariff rates and technology data, we find that a ZNE building requires ample PV capacity installed to ensure electricity sales during the day. This is complemented by investment in energy-efficient combined heat and power equipment, while occasional demand response shaves energy consumption. A large amount of storage is also adopted, which may be impractical. Nevertheless, it shows the nature of the solutions and costs necessary to achieve ZNE. For comparison, we analyze a nursing home facility in New York to examine the effects of a flatter tariff structure and different load profiles. It has trouble reaching ZNE status and its load reductions as well as efficiency measures need to be more effective than those in the

23 CFR 636.208 - May I use my existing prequalification procedures with design-build contracts?

Code of Federal Regulations, 2010 CFR

2010-04-01

... design-build contracts? 636.208 Section 636.208 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Selection Procedures, Award Criteria... use your existing prequalification procedures for either construction or engineering design firms as a...

Evaluation of a School Building in Turkey According to the Basic Sustainable Design Criteria

NASA Astrophysics Data System (ADS)

Arslan, H. D.

2017-08-01

In Turkey, as well as many other developing countries, the significance of sustainable education buildings has only recently become recognized and the issue of sustainability issue has not been sufficiently involved in laws and regulations. In this study, first of all architectural sustainability with basic design criteria has been explained. After that selected type primary school project in Turkey has been evaluated according to the sustainable design criteria. Type project of school buildings significantly limits the sustainability performance expected from buildings. It is clear that type projects shorten the planning time as they include a designing process that is independent of settlement and they are repeated in various places with different characteristics, indeed. On the other hand; abundance of disadvantages such as the overlook of the natural physical and structural properties of the location mostly restricts the sustainable design of the building. For sustainable buildings, several factors such as the environment, land, climate, insolation, direction etc. shall be taken into consideration at the beginning stage. Therefore; implementation of type projects can be deemed to be inappropriate for sustainability.

Build a Band Hands-on Challenge: Investigate Sound with PBS's "Design Squad Nation"[TM

ERIC Educational Resources Information Center

Feinberg, Lauren

2010-01-01

This article describes "Build a Band" hands-on activity from "Design Squad Nation," which allows kids to use simple materials to build a four-stringed instrument, then tune it and play a song. Kids explore frequency, pitch, and sound energy while following the steps of the engineering design process. By weaving "Design Squad Nation" episodes,…

The design-build contracting methodology for transportation projects : a review of practice and evaluation for Connecticut applications.

DOT National Transportation Integrated Search

2010-06-10

Two primary contracting methods are used by most state transportation agencies to : design and build infrastructure: design-bid-build and design-build. The objective : of this study is to conduct a literature review to identify how ConnDOTs use of...

Integrating Innovation Skills in an Introductory Engineering Design-Build Course

ERIC Educational Resources Information Center

Liebenberg, Leon; Mathews, Edward Henry

2012-01-01

Modern engineering curricula have started to emphasize design, mostly in the form of design-build experiences. Apart from instilling important problem-solving skills, such pedagogical frameworks address the critical social skill aspects of engineering education due to their team-based, project-based nature. However, it is required of the…

Structural and compositional features of high-rise buildings: experimental design in Yekaterinburg

NASA Astrophysics Data System (ADS)

Yankovskaya, Yulia; Lobanov, Yuriy; Temnov, Vladimir

2018-03-01

The study looks at the specifics of high-rise development in Yekaterinburg. High-rise buildings are considered in the context of their historical development, structural features, compositional and imaginative design techniques. Experience of Yekaterinburg architects in experimental design is considered and analyzed. Main issues and prospects of high-rise development within the Yekaterinburg structure are studied. The most interesting and significant conceptual approaches to the structural and compositional arrangement of high-rise buildings are discussed.

Building Design & Construction - Sustainability

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2003-11-01

Offers a brief history of green building; presents the results of a specially commissioned survey; and analyzes the chief trends, issues, and published research, based on interviews with dozens of experts and participants in green building.

A quantitative analysis study on the implementation of partnering in the design and build construction project

NASA Astrophysics Data System (ADS)

Halil, F. M.; Nasir, N. M.; Shukur, A. S.; Hashim, H.

2018-02-01

Design and Build construction project involved the biggest scale of the cost of investment as compared to the traditional approach. In Design and Build, the client hires a design professional that will design according to the client’s need and specification. This research aim is to explore the concept of partnering implementation practiced in the design and build procurement approach. Therefore, the selection of design professionals such as Contractors and consultants in the project is crucial to ensure the successful project completion on time, cost, and quality. The methodology adopted using quantitative approach. Administration of the questionnaire was distributed to the public client by using postal survey. Outcomes of the results, the public clients agreed that project management capabilities and commitment to budget as a crucial element of partnering from the design professional in design and build construction project.

FOSTERING SUSTAINABILITY: DESIGNING A GREEN SCIENCE BUILDING AT A SMALL MAINE COLLEGE

EPA Science Inventory

The overarching goal of the project ‘as to develop a feasibility study of building design and construction that takes into account the various local conditions, optimizes energy savings. use of building materials, and long term sustainability of the structur...

Early stage design decisions: the way to achieve sustainable buildings at lower costs.

PubMed

Bragança, Luís; Vieira, Susana M; Andrade, Joana B

2014-01-01

The construction industry attempts to produce buildings with as lower environmental impact as possible. However, construction activities still greatly affect environment; therefore, it is necessary to consider a sustainable project approach based on its performance. Sustainability is an important issue to consider in design, not only due to environmental concerns but also due to economic and social matters, promoting architectural quality and economic advantages. This paper aims to identify the phases through which a design project should be developed, emphasising the importance and ability of earlier stages to influence sustainability, performance, and life cycle cost. Then, a selection of sustainability key indicators, able to be used at the design conceptual phase and able to start predicting environmental sustainability performance of buildings is presented. The output of this paper aimed to enable designers to compare and evaluate the consequences of different design solutions, based on preliminary data, and facilitate the collaboration between stakeholders and clients and eventually yield a sustainable and high performance building throughout its life cycle.

19 CFR 10.778 - Filing of claim for tariff preference level.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Filing of claim for tariff preference level. 10.778 Section 10.778 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Morocco...

19 CFR 10.881 - Filing of claim for tariff preference level.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Filing of claim for tariff preference level. 10.881 Section 10.881 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman...

19 CFR 10.881 - Filing of claim for tariff preference level.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Filing of claim for tariff preference level. 10.881 Section 10.881 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman...

19 CFR 10.881 - Filing of claim for tariff preference level.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Filing of claim for tariff preference level. 10.881 Section 10.881 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman...

19 CFR 10.881 - Filing of claim for tariff preference level.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Filing of claim for tariff preference level. 10.881 Section 10.881 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman...

The impact of differences between patient and general population EQ-5D-3L values on the mean tariff scores of different patient groups.

PubMed

Little, Matthew H R; Reitmeir, Peter; Peters, Annette; Leidl, Reiner

2014-06-01

Health states can be valued by those who currently experience a health state (experienced health states [EHS]) or by the general public, who value a set of given health states (GHS) described to them. There has been debate over which method is more appropriate when making resource allocation decisions. This article informs this debate by assessing whether differences between these methods have an effect on the mean EQ-5D-3L tariff scores of different patient groups. The European tariff based on GHS valuations was compared with a German EHS tariff. Comparison was made in the context of EQ-5D-3L health states describing a number of diagnosed chronic diseases (stroke, diabetes, myocardial infarction, and cancer) taken from the Cooperative Health Research in the Augsburg Region population surveys. Comparison was made of both the difference in weighting of the dimensions of the EQ-5D-3L and differences in mean tariff scores for patient groups. Weighting of the dimensions of the EQ-5D-3L were found to be systematically different. The EHS tariff gave significantly lower mean scores for most, but not all, patient groups despite tariff scores being lower for 213 of 243 EQ-5D-3L health states using the GHS tariff. Differences were found to vary between groups, with the largest change in difference being 5.45 in the multiple stoke group. The two tariffs have systematic differences that in certain patient groups could drive the results of an economic evaluation. Therefore, the choice as to which is used may be critical when making resource allocation decisions. Copyright © 2014 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Low Carbon Design Research on the Space Layout Types of Office Buildings

NASA Astrophysics Data System (ADS)

Xia, Bing

2018-01-01

It is beneficial to find out the relationship of the spatial layout and low-carbon design in order to reduce buildings’ carbon emissions in the conceptual design phase. This paper analyzes and compares shape coefficient values, annual energy consumption and lighting performance of office buildings of different space layout types in Shanghai. Based on morphological characteristics of different types, the study also analyzes and presents low-carbon design strategies for each single type. This study assumes that architects should conduct passive and active design according to the specific building space layout, so that to make best use of the advantages and bypassing the disadvantages, in order to maximally reduce buildings’ carbon emissions.

Design of energy efficient building with radiant slab cooling

NASA Astrophysics Data System (ADS)

Tian, Zhen

2007-12-01

Air-conditioning comprises a substantial fraction of commercial building energy use because of compressor-driven refrigeration and fan-driven air circulation. Core regions of large buildings require year-round cooling due to heat gains from people, lights and equipment. Negative environmental impacts include CO2 emissions from electric generation and leakage of ozone-depleting refrigerants. Some argue that radiant cooling simultaneously improves building efficiency and occupant thermal comfort, and that current thermal comfort models fail to reflect occupant experience with radiant thermal control systems. There is little field evidence to test these claims. The University of Calgary's Information and Communications Technology (ICT) Building, is a pioneering radiant slab cooling installation in North America. Thermal comfort and energy performance were evaluated. Measurements included: (1) heating and cooling energy use, (2) electrical energy use for lighting and equipment, and (3) indoor temperatures. Accuracy of a whole building energy simulation model was evaluated with these data. Simulation was then used to compare the radiant slab design with a conventional (variable air volume) system. The radiant system energy performance was found to be poorer mainly due to: (1) simultaneous cooling by the slab and heating by other systems, (2) omission of low-exergy (e.g., groundwater) cooling possible with the high cooling water temperatures possible with radiant slabs and (3) excessive solar gain and conductive heat loss due to the wall and fenestration design. Occupant thermal comfort was evaluated through questionnaires and concurrent measurement of workstation comfort parameters. Analysis of 116 sets of data from 82 occupants showed that occupant assessment was consistent with estimates based on current thermal comfort models. The main thermal comfort improvements were reductions in (1) local discomfort from draft and (2) vertical air temperature stratification. The

Technology Solutions Case Study: Design Guidance for Passive Vents in New Construction, Multifamily Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

In an effort to improve indoor air quality in high-performance, new construction, multifamily buildings, dedicated sources of outdoor air are being implemented. Passive vents are being selected by some design teams over other strategies because of their lower first costs and operating costs. The U.S. Department of Energy’s Building America research team Consortium for Advanced Residential Buildings constructed eight steps, which outline the design and commissioning required for these passive vents to perform as intended.

The Barriers and Causes of Building Information Modelling Usage for Interior Design Industry

NASA Astrophysics Data System (ADS)

Hamid, A. B. Abd; Taib, M. Z. Mohd; Razak, A. H. N. Abdul; Embi, M. R.

2017-12-01

Building Information Modeling (BIM) has since developed alongside the improvement in the construction industry, purposely to simulate the design, management, construction and documentation. It facilitates and monitors the construction through visualization and emphasizes on various inputs to virtually design and construct a building using specific software. This study aims to identify and elaborate barriers of BIM usage in interior design industry in Malaysia. This study is initiated with a pilot survey utilising sixteen respondents that has been randomly chosen. Respondents are attached with interior design firms that are registered by Lembaga Arkitek Malaysia (LAM). The research findings are expected to provide significant information to encourage BIM adoption among interior design firms.

Program for developing and implementing a new approach to designing for fire safety in buildings

NASA Technical Reports Server (NTRS)

1975-01-01

The traditional method of providing for fire safety in buildings through reliance on codes and standards that prescribe specific measures to be taken in the design and construction of buildings to minimize the potential for a fire occurring and to protect property and life should a fire occur was evaluated. A new approach to designing for fire safety in buildings is outlined.

18 CFR 341.1 - Electronic filing of tariffs and related materials.

Code of Federal Regulations, 2010 CFR

2010-04-01

... contents are true to the best knowledge and belief of the signer, and that the signer possesses full power... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Electronic filing of tariffs and related materials. 341.1 Section 341.1 Conservation of Power and Water Resources FEDERAL...

18 CFR 154.4 - Electronic filing of tariffs and related materials.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Electronic filing of tariffs and related materials. 154.4 Section 154.4 Conservation of Power and Water Resources FEDERAL... the contents are true to the best knowledge and belief of the signer, and that the signer possesses...

19 CFR 10.607 - Goods eligible for tariff preference level claims.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Republic-Central America-United States Free Trade Agreement Tariff Preference Level § 10.607 Goods eligible.... 10.607 Section 10.607 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND... apparel goods provided for in U.S. Note 15(b), Subchapter XV, Chapter 99, HTSUS, that are both cut (or...

18 CFR 154.112 - Exception to form and composition of tariff.

Code of Federal Regulations, 2010 CFR

2010-04-01

... exchange of natural gas. The special rate schedule must contain a title page showing the parties to the... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Exception to form and composition of tariff. 154.112 Section 154.112 Conservation of Power and Water Resources FEDERAL ENERGY...

10 CFR 435.306 - Selecting a life cycle effective proposed building design.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Selecting a life cycle effective proposed building design. 435.306 Section 435.306 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR NEW FEDERAL LOW-RISE RESIDENTIAL BUILDINGS Mandatory Energy Efficiency Standards for Federal...

Illinois Occupational Skill Standards: Information Technology Design/Build Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document contains Illinois Occupational Skill Standards for occupations in the Information Technology Design and Build Cluster (technical writer, programmer, system analyst, network architect, application product architect, network engineer, and database administrator). The skill standards define what an individual should know and the…

Environmental and international tariffs in a mixed duopoly

NASA Astrophysics Data System (ADS)

Ferreira, Fernanda A.; Ferreira, Flávio

2013-10-01

In this paper, we study the effects of environmental and trade policies in an international mixed duopoly serving two markets, in which the public firm maximizes the sum of consumer surplus and its profit. We also analyse the effects of privatization. The model has two stages. In the first stage, governments choose environmental taxes and import tariffs, simultaneously. Then, the firms engage in a Cournot competition, choosing output levels for the domestic market and to export. We compare the results obtained in the three different ways of moving on the decision make of the firms.

Optimization of a hybrid electric power system design for large commercial buildings: An application design guide

NASA Astrophysics Data System (ADS)

Lee, Keun

with the optimization of the hybrid system design (which consists of PV panels and/or wind turbines and/or storage devices for building applications) by developing an algorithm designed to make the system cost effective and energy efficient. Input data includes electrical load demand profile of the buildings, buildings' structural and geographical characteristics, real time pricing of electricity, and the costs of hybrid systems and storage devices. When the electrical load demand profile of a building that is being studied is available, a measured demand profile is directly used as input data. However, if that information is not available, a building's electric load demand is estimated using a developed algorithm based on three large data sources from a public domain, and used as input data. Using the acquired input data, the algorithm of this research is designed and programmed in order to determine the size of renewable components and to minimize the total yearly net cost. This dissertation also addresses the parametric sensitivity analysis to determine which factors are more significant and are expected to produce useful guidelines in the decision making process. An engineered and more practical, simplified solution has been provided for the optimized design process.

Whole-building Design Increases Energy Efficiency in a Mixed-Humid Climate: Ideal Homes - Norman, Oklahoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

New houses designed by Ideal Homes, with technical support from the U.S. Department of Energy's Building America Program, save their homeowners money by applying the principles of "whole-building" design. The homes are in Norman, Oklahoma.

Whole-Building Design Increases Energy Efficiency in a Mixed-Humid Climate: Ideal Homes, Norman, Oklahoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poole, L.; Anderson, R.

New houses designed by Ideal Homes, with technical support from the U.S. Department of Energy's Building America Program, save their homeowners money by applying the principles of ''whole-building'' design. The homes are in Norman, Oklahoma.

Market and behavioral barriers to energy efficiency: A preliminary evaluation of the case for tariff financing in California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fujita, K. Sydny

number of outdated appliances, in California rental housing. Appliances in rental housing are on average older than those in owner occupied housing. More importantly, a substantial proportion of very old appliances are in rental housing. Having established that a very old stock of appliances exists in California rental housing, I discuss tariff financing as a policy option to reduce the impact of the remaining market and behavioral barriers. In a tariff financing program, the utility pays the initial cost of an appliance, and is repaid through subsequent utility bills. By eliminating upfront costs, tying repayment to the gas or electric meter, requiring a detailed energy audit, and relying upon utility bill payment history rather than credit score in determining participant eligibility, tariff financing largely overcomes many barriers to energy efficiency. Using California as a case study, I evaluate the feasibility of implementing tariff financing. For water heaters in particular, this appears to be a cost-effective strategy. Tariff financing from utilities is particularly valuable because it improves the ability of low-income renters to lower their utility bills, without burdening landlords with unrecoverable capital costs. To implement tariff financing country-wide, regulations in many states defining private loan-making institutions or the allowable use of public benefit funds may need to be modified. Tariff financing is relatively new and in most locations is only available as a pilot program or has only recently exited pilot phase. This preliminary evaluation suggests that tariff financing is a valuable future addition to the toolkit of policymakers who aim to increase the diffusion of efficient appliances. While regulatory approval is necessary in states that wish to pursue tariff financing, at this point, the major barrier to further implementation appears to be the newness of the financing mechanism.« less

Solar Heating and Cooling of Residential Buildings: Design of Systems.

ERIC Educational Resources Information Center

Colorado State Univ., Ft. Collins. Solar Energy Applications Lab.

This is the second of two training courses designed to develop the capability of practitioners in the home building industry to design solar heating and cooling systems. The course is organized in 23 modules to separate selected topics and to facilitate learning. Although a compact schedule of one week is shown, a variety of formats can be…

THE CO2 ABATEMENT POTENTIAL OF CALIFORNIA'S MID-SIZED COMMERCIAL BUILDINGS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stadler, Michael; Marnay, Chris; Cardoso, Goncalo

2009-12-31

The Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) is working with the California Energy Commission (CEC) todetermine the potential role of commercial sector distributed generation (DG) with combined heat and power (CHP) capability deployment in greenhouse gas emissions (GHG) reductions. CHP applications at large industrial sites are well known, and a large share of their potential has already been harvested. In contrast, relatively little attention has been paid to the potential of medium-sized commercial buildings, i.e. ones with peak electric loads ranging from 100 kW to 5 MW. We examine how this sector might implement DG with CHP in costmore » minimizing microgrids that are able to adopt and operate various energy technologies, such as solar photovoltaics (PV), on-site thermal generation, heat exchangers, solar thermal collectors, absorption chillers, and storage systems. We apply a mixed-integer linear program (MILP) that minimizes a site?s annual energy costs as its objective. Using 138 representative mid-sized commercial sites in California (CA), existing tariffs of three major electricity distribution ultilities, and performance data of available technology in 2020, we find the GHG reduction potential for this CA commercial sector segment, which represents about 35percent of total statewide commercial sector sales. Under the assumptions made, in a reference case, this segment is estimated to be capable of economically installing 1.4 GW of CHP, 35percent of the California Air Resources Board (CARB) statewide 4 GW goal for total incremental CHP deployment by 2020. However, because CARB?s assumed utilization is far higher than is found by the MILP, the adopted CHP only contributes 19percent of the CO2 target. Several sensitivity runs were completed. One applies a simple feed-in tariff similar to net metering, and another includes a generous self-generation incentive program (SGIP) subsidy for fuel cells. The feed-in tariff proves ineffective at

Building patient-centeredness: hospital design as an interpretive act.

PubMed

Bromley, Elizabeth

2012-09-01

Hospital designs reflect the sociocultural, economic, professional, and aesthetic priorities prevalent at a given time. As such, hospital buildings concretize assumptions about illness, care and healing, patienthood, and medical providers' roles. Trends in hospital design have been attributed to the increasing influence of consumerism on healthcare, the influx of business-oriented managers, and technological changes. This paper describes the impact of the concept of patient-centeredness on the design of a new hospital in the USA. Data come from 35 interviews with planners, administrators, and designers of the new hospital, as well as from public documents about the hospital design. Thematic content analysis was used to identify salient design principles and intents. For these designers, administrators, and planners, an interpretation of patient-centeredness served as a heuristic, guiding the most basic decisions about space, people, and processes in the hospital. I detail the particular interpretation of patient-centeredness used to build and manage the new hospital space and the roles and responsibilities of providers working within it. Three strategies were central to the implementation of patient-centeredness: an onstage/offstage layout; a concierge approach to patients; and the scripting of communication. I discuss that this interpretation of patient-centeredness may challenge medical professionals' roles, may construct medical care as a product that should sate the patient's desire, and may distance patients from the realities of medical care. By describing the ways in which hospital designs reflect and reinforce contemporary concepts of patienthood and caring, this paper raises questions about the implementation of patient-centeredness that deserve further empirical study by medical social scientists. Copyright © 2012 Elsevier Ltd. All rights reserved.

Design, Specification and Construction of Specialized Measurement System in the Experimental Building

NASA Astrophysics Data System (ADS)

Fedorczak-Cisak, Malgorzata; Kwasnowski, Pawel; Furtak, Marcin; Hayduk, Grzegorz

2017-10-01

Experimental buildings for “in situ” research are a very important tool for collecting data on energy efficiency of the energy-saving technologies. One of the most advanced building of this type in Poland is the Maloposkie Laboratory of Energy-saving Buildings at Cracow University of Technology. The building itself is used by scientists as a research object and research tool to test energy-saving technologies. It is equipped with a specialized measuring system consisting of approx. 3 000 different sensors distributed in technical installations and structural elements of the building (walls, ceilings, cornices) and the ground. The authors of the paper will present the innovative design and technology of this specialized instrumentation. They will discuss issues arising during the implementation and use of the building.

On ethics and the earthquake resistant interior design of buildings.

PubMed

Hurol, Yonca

2014-03-01

The most common tectonic quality of modern structures, such as frame systems, is their flexibility; they are open for change. Although this characteristic is a big advantage in comparison to the inflexible masonry structures of the past, it might also create some serious problems, such as e.g. the lack of safety in the event of an earthquake, if the flexibility is not used consciously by architects and interior designers. This article attempts to define and establish some rules for the interior design of buildings with reinforced concrete frame systems. The rules for making subtractions from these structures and extending them by making additions to them are contained within this article. The main objective of this article is to derive some ethical values from these rules. Thus, the conclusion of the article focuses on the derivation of some ethical values for achieving earthquake resistant interior design of buildings with reinforced concrete frame systems.

Optimization of design parameters of low-energy buildings

NASA Astrophysics Data System (ADS)

Vala, Jiří; Jarošová, Petra

2017-07-01

Evaluation of temperature development and related consumption of energy required for heating, air-conditioning, etc. in low-energy buildings requires the proper physical analysis, covering heat conduction, convection and radiation, including beam and diffusive components of solar radiation, on all building parts and interfaces. The system approach and the Fourier multiplicative decomposition together with the finite element technique offers the possibility of inexpensive and robust numerical and computational analysis of corresponding direct problems, as well as of the optimization ones with several design variables, using the Nelder-Mead simplex method. The practical example demonstrates the correlation between such numerical simulations and the time series of measurements of energy consumption on a small family house in Ostrov u Macochy (35 km northern from Brno).

Early Stage Design Decisions: The Way to Achieve Sustainable Buildings at Lower Costs

PubMed Central

Bragança, Luís; Vieira, Susana M.; Andrade, Joana B.

2014-01-01

The construction industry attempts to produce buildings with as lower environmental impact as possible. However, construction activities still greatly affect environment; therefore, it is necessary to consider a sustainable project approach based on its performance. Sustainability is an important issue to consider in design, not only due to environmental concerns but also due to economic and social matters, promoting architectural quality and economic advantages. This paper aims to identify the phases through which a design project should be developed, emphasising the importance and ability of earlier stages to influence sustainability, performance, and life cycle cost. Then, a selection of sustainability key indicators, able to be used at the design conceptual phase and able to start predicting environmental sustainability performance of buildings is presented. The output of this paper aimed to enable designers to compare and evaluate the consequences of different design solutions, based on preliminary data, and facilitate the collaboration between stakeholders and clients and eventually yield a sustainable and high performance building throughout its life cycle. PMID:24578630

A supermolecular building approach for the design and construction of metal-organic frameworks.

PubMed

Guillerm, Vincent; Kim, Dongwook; Eubank, Jarrod F; Luebke, Ryan; Liu, Xinfang; Adil, Karim; Lah, Myoung Soo; Eddaoudi, Mohamed

2014-08-21

In this review, we describe two recently implemented conceptual approaches facilitating the design and deliberate construction of metal–organic frameworks (MOFs), namely supermolecular building block (SBB) and supermolecular building layer (SBL) approaches. Our main objective is to offer an appropriate means to assist/aid chemists and material designers alike to rationally construct desired functional MOF materials, made-to-order MOFs. We introduce the concept of net-coded building units (net-cBUs), where precise embedded geometrical information codes uniquely and matchlessly a selected net, as a compelling route for the rational design of MOFs. This concept is based on employing pre-selected 0-periodic metal–organic polyhedra or 2-periodic metal–organic layers, SBBs or SBLs respectively, as a pathway to access the requisite net-cBUs. In this review, inspired by our success with the original rht-MOF, we extrapolated our strategy to other known MOFs via their deconstruction into more elaborate building units (namely polyhedra or layers) to (i) elucidate the unique relationship between edge-transitive polyhedra or layers and minimal edge-transitive 3-periodic nets, and (ii) illustrate the potential of the SBB and SBL approaches as a rational pathway for the design and construction of 3-periodic MOFs. Using this design strategy, we have also identified several new hypothetical MOFs which are synthetically targetable.

24 CFR 570.205 - Eligible planning, urban environmental design and policy-planning-management-capacity building...

Code of Federal Regulations, 2010 CFR

2010-04-01

... environmental design and policy-planning-management-capacity building activities. 570.205 Section 570.205..., urban environmental design and policy-planning-management-capacity building activities. (a) Planning...; (iv) Open space and recreation; (v) Energy use and conservation; (vi) Floodplain and wetlands...

Invention, design and performance of coconut agrowaste fiberboards for ecologically efficacious buildings

NASA Astrophysics Data System (ADS)

Lokko, Mae-ling Jovenes

As global quantities of waste by-products from food production as well as the range of their applications increase, researchers are realizing critical opportunities to transform the burden of underutilized wastes into ecological profits. Within the tropical hot-humid region, where half the world's current and projected future population growth is concentrated, there is a dire demand for building materials to meet ambitious development schemes and rising housing deficits. However, the building sector has largely overlooked the potential of local agricultural wastes to serve as alternatives to energy-intensive, imported building technologies. Industrial ecologists have recently investigated the use of agrowaste biocomposites to replace conventional wood products that use harmful urea-formaldehyde, phenolic and isocyanate resins. Furthermore, developments in the performance of building material systems with respect to cost, energy, air quality management and construction innovation have evolved metrics about what constitutes material 'upcycling' within building life cycle. While these developments have largely been focused on technical and cost performance, much less attention has been paid to addressing deeply-seated social and cultural barriers to adoption that have sedimented over decades of importation. This dissertation evaluates the development coconut agricultural building material systems in four phases: (i) non-toxic, low-energy production of medium-high density boards (500-1200 kg/m3) from coconut fibers and emerging biobinders; (ii) characterization and evaluation of coconut agricultural building materials hygrothermal performance (iii) scaled-up design development of coconut modular building material systems and (iv) development of a value translation framework for the bottom-up distribution of value to stakeholders within the upcycling framework. This integrated design methodological approach is significant to develop ecological thinking around agrowaste

7. Historic American Buildings Survey ORIGINAL DESIGN SUBMITTED BY PEABODY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Historic American Buildings Survey ORIGINAL DESIGN SUBMITTED BY PEABODY AND STEARNS (FROM THE ORIGINAL IN THE LIBRARY OF THE VOLTA BUREAU) - Volta Bureau, 1537 Thirty-fifth Street Northwest, Washington, District of Columbia, DC

24 CFR 1003.205 - Eligible planning, urban environmental design and policy-planning-management-capacity building...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Eligible planning, urban environmental design and policy-planning-management-capacity building activities. 1003.205 Section 1003.205... planning, urban environmental design and policy-planning-management-capacity building activities. (a...

24 CFR 1003.205 - Eligible planning, urban environmental design and policy-planning-management-capacity building...

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Eligible planning, urban environmental design and policy-planning-management-capacity building activities. 1003.205 Section 1003.205... planning, urban environmental design and policy-planning-management-capacity building activities. (a...

Earthquakes and building design: a primer for the laboratory animal professional.

PubMed

Vogelweid, Catherine M; Hill, James B; Shea, Robert A; Johnson, Daniel B

2005-01-01

Earthquakes can occur in most regions of the United States, so it might be necessary to reinforce vulnerable animal facilities to better protect research animals during these unpredictable events. A risk analysis should include an evaluation of the seismic hazard risk at the proposed building site balanced against the estimated consequences of losses. Risk analysis can help in better justifying and recommending to building owners the costs of incorporating additional seismic reinforcements. The planning team needs to specify the level of post-earthquake building function that is desired in the facility, and then design the facility to it.

On the design of high-rise buildings with a specified level of reliability

NASA Astrophysics Data System (ADS)

Dolganov, Andrey; Kagan, Pavel

2018-03-01

High-rise buildings have a specificity, which significantly distinguishes them from traditional buildings of high-rise and multi-storey buildings. Steel structures in high-rise buildings are advisable to be used in earthquake-proof regions, since steel, due to its plasticity, provides damping of the kinetic energy of seismic impacts. These aspects should be taken into account when choosing a structural scheme of a high-rise building and designing load-bearing structures. Currently, modern regulatory documents do not quantify the reliability of structures. Although the problem of assigning an optimal level of reliability has existed for a long time. The article shows the possibility of designing metal structures of high-rise buildings with specified reliability. Currently, modern regulatory documents do not quantify the reliability of high-rise buildings. Although the problem of assigning an optimal level of reliability has existed for a long time. It is proposed to establish the value of reliability 0.99865 (3σ) for constructions of buildings and structures of a normal level of responsibility in calculations for the first group of limiting states. For increased (construction of high-rise buildings) and reduced levels of responsibility for the provision of load-bearing capacity, it is proposed to assign respectively 0.99997 (4σ) and 0.97725 (2σ). The coefficients of the use of the cross section of a metal beam for different levels of security are given.

INFLUENCES OF HVAC DESIGN AND OPERATION ON RADON MITIGATION OF EXISTING SCHOOL BUILDINGS

EPA Science Inventory

The paper discusses various school building characteristics identified as influencing radon entry, the design and operation of installed mitigation systems in four Maryland schools, and the success of these systems in reducing school radon levels. Several public school buildings ...

Window Design Strategies to Conserve Energy. NBS Building Science Series 104.

ERIC Educational Resources Information Center

Hastings, S. Robert; Crenshaw, Richard W.

A multitude of design strategies are available to achieve energy-efficient windows. Opportunities for improving window performance fall into six groups: site, exterior appendages, frame, glazing, interior accessories, and building interior. Design strategies within these groups can improve one or more of the six energy functions of windows: solar…

"Watts per person" paradigm to design net zero energy buildings: Examining technology interventions and integrating occupant feedback to reduce plug loads in a commercial building

NASA Astrophysics Data System (ADS)

Yagi Kim, Mika

As building envelopes have improved due to more restrictive energy codes, internal loads have increased largely due to the proliferation of computers, electronics, appliances, imaging and audio visual equipment that continues to grow in commercial buildings. As the dependency on the internet for information and data transfer increases, the electricity demand will pose a challenge to design and operate Net Zero Energy Buildings (NZEBs). Plug Loads (PLs) as a proportion of the building load has become the largest non-regulated building energy load and represents the third highest electricity end-use in California's commercial office buildings, accounting for 23% of the total building electricity consumption (Ecova 2011,2). In the Annual Energy Outlook 2008 (AEO2008), prepared by the Energy Information Administration (EIA) that presents long-term projections of energy supply and demand through 2030 states that office equipment and personal computers are the "fastest growing electrical end uses" in the commercial sector. This thesis entitled "Watts Per Person" Paradigm to Design Net Zero Energy Buildings, measures the implementation of advanced controls and behavioral interventions to study the reduction of PL energy use in the commercial sector. By integrating real world data extracted from an energy efficient commercial building of its energy use, the results produce a new methodology on estimating PL energy use by calculating based on "Watts Per Person" and analyzes computational simulation methods to design NZEBs.

A Project to Design and Build Compact Heat Exchangers

ERIC Educational Resources Information Center

Davis, Richard A.

2005-01-01

Students designed and manufactured compact, shell-and-tube heat exchangers in a project-based learning exercise integrated with our heat transfer course. The heat exchangers were constructed from common building materials available at home improvement centers. The cost of materials for a device was less than $20. The project gave students…

Designs for Collective Cognitive Responsibility in Knowledge-Building Communities

ERIC Educational Resources Information Center

Zhang, Jianwei; Scardamalia, Marlene; Reeve, Richard; Messina, Richard

2009-01-01

This article reports a design experiment conducted over three successive school years, with the teacher's goal of having his Grade 4 students assume increasing levels of collective responsibility for advancing their knowledge of optics. Classroom practices conducive to sustained knowledge building were co-constructed by the teacher and students,…

Revision of seismic design codes corresponding to building damages in the ``5.12'' Wenchuan earthquake

NASA Astrophysics Data System (ADS)

Wang, Yayong

2010-06-01

A large number of buildings were seriously damaged or collapsed in the “5.12” Wenchuan earthquake. Based on field surveys and studies of damage to different types of buildings, seismic design codes have been updated. This paper briefly summarizes some of the major revisions that have been incorporated into the “Standard for classification of seismic protection of building constructions GB50223-2008” and “Code for Seismic Design of Buildings GB50011-2001.” The definition of seismic fortification class for buildings has been revisited, and as a result, the seismic classifications for schools, hospitals and other buildings that hold large populations such as evacuation shelters and information centers have been upgraded in the GB50223-2008 Code. The main aspects of the revised GB50011-2001 code include: (a) modification of the seismic intensity specified for the Provinces of Sichuan, Shanxi and Gansu; (b) basic conceptual design for retaining walls and building foundations in mountainous areas; (c) regularity of building configuration; (d) integration of masonry structures and pre-cast RC floors; (e) requirements for calculating and detailing stair shafts; and (f) limiting the use of single-bay RC frame structures. Some significant examples of damage in the epicenter areas are provided as a reference in the discussion on the consequences of collapse, the importance of duplicate structural systems, and the integration of RC and masonry structures.

Origami-inspired building block and parametric design for mechanical metamaterials

NASA Astrophysics Data System (ADS)

Jiang, Wei; Ma, Hua; Feng, Mingde; Yan, Leilei; Wang, Jiafu; Wang, Jun; Qu, Shaobo

2016-08-01

An origami-based building block of mechanical metamaterials is proposed and explained by introducing a mechanism model based on its geometry. According to our model, this origami mechanism supports response to uniaxial tension that depends on structure parameters. Hence, its mechanical properties can be tunable by adjusting the structure parameters. Experiments for poly lactic acid (PLA) samples were carried out, and the results are in good agreement with those of finite element analysis (FEA). This work may be useful for designing building blocks of mechanical metamaterials or other complex mechanical structures.

19 CFR 141.90 - Notation of tariff classification and value on invoice.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Notation of tariff classification and value on... classification and value on invoice. (a) [Reserved] (b) Classification and rate of duty. The importer or customs... invoice value which have been made to arrive at the aggregate entered value. In addition, the entered unit...

Design-Build in Public School Construction: A Post Hearing Briefing. A Report of the Joint Legislative Audit Committee.

ERIC Educational Resources Information Center

California State Legislature, Sacramento. Joint Legislative Audit Committee.

The California legislature's Joint Legislative Audit Committee has issued a report on the design-build versus the design-bid-build process and offers a hybrid approach combining the two systems as a way of achieving the greatest cost efficiency at the least risk on public agencies. The cost benefits of faster delivery of the design-build method…

23 CFR 636.208 - May I use my existing prequalification procedures with design-build contracts?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false May I use my existing prequalification procedures with design-build contracts? 636.208 Section 636.208 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Selection Procedures, Award Criteria § 636.208 May I use my existing...

Port Graham Community Building Biomass Heating Design Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Norman, Patrick; Sink, Charles

Native Village of Port Graham completed preconstruction activities to prepare for construction and operations of a cord wood biomass heating system to five or more community buildings in Port Graham, Alaska. Project Description Native Village of Port Graham (NVPG) completed preconstruction activities that pave the way towards reduced local energy costs through the construction and operations of a cord wood biomass heating system. NVPG plans include installation of a GARN WHS 3200 Boiler that uses cord wood as fuel source. Implementation of the 700,000 Btu per hour output biomass community building heat utility would heat 5-community buildings in Port Graham,more » Alaska. Heating system is estimated to displace 85% of the heating fuel oil or 5365 gallons of fuel on an annual basis with an estimated peak output of 600,000 Btu per hour. Estimated savings is $15,112.00 per year. The construction cost estimate made to install the new biomass boiler system is estimated $251,693.47 with an additional Boiler Building expansion cost estimated at $97,828.40. Total installed cost is estimated $349,521.87. The WHS 3200 Boiler would be placed inside a new structure at the old community Water Plant Building site that is controlled by NVPG. Design of the new biomass heat plant and hot water loop system was completed by Richmond Engineering, NVPG contractor for the project. A hot water heat loop system running off the boiler is designed to be placed underground on lands controlled by NVPG and stubbed to feed hot water to existing base board heating system in the following community buildings: 1. Anesia Anahonak Moonin Health and Dental Clinic 2. Native Village of Port Graham offices 3. Port Graham Public Safety Building/Fire Department 4. Port Graham Corporation Office Building which also houses the Port Graham Museum and Head Start Center 5. North Pacific Rim Housing Authority Workshop/Old Fire Hall Existing community buildings fuel oil heating systems are to be retro

Research on Energy-saving Shape Design of High School Library Building in Cold Region

NASA Astrophysics Data System (ADS)

Hui, Zhao; Weishuang, Xie; Zirui, Tong

2017-11-01

Considering climatic characteristics in cold region, existing high school libraries in Changchun are researched according to investigation of real conditions of these library buildings. Mathematical analysis and CAD methods are used to summarize the relation between building shape and building energy saving of high school library. Strategies are put forward for sustainable development of high school library building in cold region, providing reliable design basis for construction of high school libraries in Changchun.

An Analysis of the DER Adoption Climate in Japan UsingOptimization Results for Prototype Buildings with U.S. Comparisons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Marnay, Chris; Firestone, Ryan

2006-06-16

This research demonstrates economically optimal distributedenergy resource (DER) system choice using the DER choice and operationsoptimization program, the Distributed Energy Resources Customer AdoptionModel (DER-CAM). DER-CAM finds the optimal combination of installedequipment given prevailing utility tariffs and fuel prices, siteelectrical and thermal loads (including absorption cooling), and a menuof available equipment. It provides a global optimization, albeitidealized, that shows how site useful energy loads can be served atminimum cost. Five prototype Japanese commercial buildings are examinedand DER-CAM is applied to select the economically optimal DER system foreach. Based on the optimization results, energy and emission reductionsare evaluated. Significant decreases in fuelmore » consumption, carbonemissions, and energy costs were seen in the DER-CAM results. Savingswere most noticeable in the prototype sports facility, followed by thehospital, hotel, and office building. Results show that DER with combinedheat and power equipment is a promising efficiency and carbon mitigationstrategy, but that precise system design is necessary. Furthermore, aJapan-U.S. comparison study of policy, technology, and utility tariffsrelevant to DER installation is presented.« less

Advancing Integrated STEM Learning through Engineering Design: Sixth-Grade Students' Design and Construction of Earthquake Resistant Buildings

ERIC Educational Resources Information Center

English, Lyn D.; King, Donna; Smeed, Joanna

2017-01-01

As part of a 3-year longitudinal study, 136 sixth-grade students completed an engineering-based problem on earthquakes involving integrated STEM learning. Students employed engineering design processes and STEM disciplinary knowledge to plan, sketch, then construct a building designed to withstand earthquake damage, taking into account a number of…

10 CFR 435.303 - Requirements for the design of a Federal residential building.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Requirements for the design of a Federal residential building. 435.303 Section 435.303 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR NEW FEDERAL LOW-RISE RESIDENTIAL BUILDINGS Mandatory Energy Efficiency Standards for Federal...

10 CFR 435.303 - Requirements for the design of a Federal residential building.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Requirements for the design of a Federal residential building. 435.303 Section 435.303 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR NEW FEDERAL LOW-RISE RESIDENTIAL BUILDINGS Mandatory Energy Efficiency Standards for Federal...

Corrosion of Embedded Metals in Wood: An Overview of Recent Research with Implications for building moisture design

Treesearch

Samuel L. Zelinka

2013-01-01

ASHRAE Standard 160, Criteria for Moisture-Control Design Analysis in Buildings, specifies moisture design criteria in buildings to prevent moisture damage such as fungal activity and corrosion. While there has been much research on mold and decay fungi in wood buildings, it is often overlooked that wet wood is corrosive to the metal screws...

Lessons We Learned Designing and Building the Chandra Telescope

NASA Technical Reports Server (NTRS)

Arenberg, Jonathan; Matthews, Gary; Atkinson, C.; Cohen, L.; Golisano, C.; Havey, K.; Hefner, K.; Jones, C.; Kegley, J.; Knollenberg, P.;

SUSTAINABLE BUILDING DESIGN FOR A SCHOOL – COMMUNITY CENTER IN RURAL NIGERIA

EPA Science Inventory

We expect to find adequate information that will aid in designing a rainwater collection, protection, and irrigation system appropriate for the future school construction. The final design of the school building will develop in a manner that will allow villagers to maintain an...

The design of a solar energy collection system to augment heating and cooling for a commercial office building

NASA Technical Reports Server (NTRS)

Basford, R. C.

1977-01-01

Analytical studies supported by experimental testing indicate that solar energy can be utilized to heat and cool commercial buildings. In a 50,000 square foot one-story office building at the Langley Research Center, 15,000 square feet of solar collectors are designed to provide the energy required to supply 79 percent of the building heating needs and 52 percent of its cooling needs. The experience gained from the space program is providing the technology base for this project. Included are some of the analytical studies made to make the building design changes necessary to utilize solar energy, the basic solar collector design, collector efficiencies, and the integrated system design.

31 CFR 101.3 - Petitions reviewed by Assistant Secretary, Enforcement, Operations, Tariff Affairs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... time of submission or thereafter; (3) The coins are not needed and will not be needed in the future in... reviewed by Assistant Secretary, Enforcement, Operations, Tariff Affairs. (a) The Assistant Secretary will receive and review all petitions for mitigation of the forfeiture of counterfeit gold coins. He shall...

Reduction of lighting energy consumption in office buildings through improved daylight design

NASA Astrophysics Data System (ADS)

Papadouri, Maria Violeta Prado

This study aims to investigate the lighting energy consumption in office buildings and the options for its reduction. One way to reduce lighting energy consumption is by improving the daylight design. A better use of daylight in buildings might be an outcome from the effort made in different directions. Like the improvement of a building's fabric and layout, the materials, even the furniture in a space influences the daylight quality considerably. Also very important role in lighting energy consumption has the development of more efficient lighting technology like the electric lighting control systems, such as photo sensors and occupancy sensors. Both systems are responsible so that the electric light is not used without reason. As the focusing area of this study, is to find ways to improve the daylight use in buildings, a consequent question is which are the methods provided in order to achieve this The accuracy of the methodology used is also an important issue in order to achieve reliable results. The methodology applied in this study includes the analysis of a case study by taking field measurements and computer simulations. The first stage included gathering information about the lighting design of the building and monitoring the light levels, both from natural and from the electric lighting. The second stage involved testing with computer simulations, different parameters that were expected to improve the daylight exploitation of the specific area. The results of the field measurements showed that the main problems of the space were the low natural light levels and the poor daylight distribution. The annual electric lighting energy consumption, as it was calculated with the use of computer simulations, represented the annual energy consumption of a typical air-conditioned prestige office building (energy consumption guide 19, for energy use in offices, 2000). After several computer simulations, the results showed that initial design parameters of the building

NASA Clean-Sheet Fans: Design, Build Analyze, Test, and Report

NASA Technical Reports Server (NTRS)

Koch, L. Danielle

2008-01-01

A suggested topic in small fan research is presented. Presentation briefly describes the scope of an effort to design, build and test a ventilation class cooling fan. Comments are included for the following categories: information (available and needed), benefits and values, concerns, variations and alternatives, and interest.

Whole Building Design Objectives for Campus Safety and Security: A System Dynamics Approach

ERIC Educational Resources Information Center

Oakes, Charles G.

2010-01-01

The May/June 2009 issue of "Facilities Manager" introduced APPA readers to the Whole Building Design Guide (WBDG)--today's most comprehensive Internet-based depository of resources contributing to a systems approach for everything of a building nature. The emphasis in that article was on Operations and Maintenance (O&M) issues and procedures. In…

Utilization of building information modeling in infrastructure’s design and construction

NASA Astrophysics Data System (ADS)

Zak, Josef; Macadam, Helen

2017-09-01

Building Information Modeling (BIM) is a concept that has gained its place in the design, construction and maintenance of buildings in Czech Republic during recent years. This paper deals with description of usage, applications and potential benefits and disadvantages connected with implementation of BIM principles in the preparation and construction of infrastructure projects. Part of the paper describes the status of BIM implementation in Czech Republic, and there is a review of several virtual design and construction practices in Czech Republic. Examples of best practice are presented from current infrastructure projects. The paper further summarizes experiences with new technologies gained from the application of BIM related workflows. The focus is on the BIM model utilization for the machine control systems on site, quality assurance, quality management and construction management.

Performance-based seismic design of nonstructural building components: The next frontier of earthquake engineering

NASA Astrophysics Data System (ADS)

Filiatrault, Andre; Sullivan, Timothy

2014-08-01

With the development and implementation of performance-based earthquake engineering, harmonization of performance levels between structural and nonstructural components becomes vital. Even if the structural components of a building achieve a continuous or immediate occupancy performance level after a seismic event, failure of architectural, mechanical or electrical components can lower the performance level of the entire building system. This reduction in performance caused by the vulnerability of nonstructural components has been observed during recent earthquakes worldwide. Moreover, nonstructural damage has limited the functionality of critical facilities, such as hospitals, following major seismic events. The investment in nonstructural components and building contents is far greater than that of structural components and framing. Therefore, it is not surprising that in many past earthquakes, losses from damage to nonstructural components have exceeded losses from structural damage. Furthermore, the failure of nonstructural components can become a safety hazard or can hamper the safe movement of occupants evacuating buildings, or of rescue workers entering buildings. In comparison to structural components and systems, there is relatively limited information on the seismic design of nonstructural components. Basic research work in this area has been sparse, and the available codes and guidelines are usually, for the most part, based on past experiences, engineering judgment and intuition, rather than on objective experimental and analytical results. Often, design engineers are forced to start almost from square one after each earthquake event: to observe what went wrong and to try to prevent repetitions. This is a consequence of the empirical nature of current seismic regulations and guidelines for nonstructural components. This review paper summarizes current knowledge on the seismic design and analysis of nonstructural building components, identifying major

76 FR 80866 - Non-Vessel-Operating Common Carriers Negotiated Rate Arrangements; Tariff Filing Exemption

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

... FEDERAL MARITIME COMMISSION 46 CFR Part 532 [Docket No. 11-22] Non-Vessel-Operating Common Carriers Negotiated Rate Arrangements; Tariff Filing Exemption AGENCY: Federal Maritime Commission. ACTION: Notice of Inquiry. SUMMARY: The Federal Maritime Commission is issuing this Notice of Inquiry seeking...

19 CFR 10.510 - Filing of claim for preferential tariff treatment upon importation.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Filing of claim for preferential tariff treatment upon importation. 10.510 Section 10.510 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT... RATE, ETC. United States-Singapore Free Trade Agreement Import Requirements § 10.510 Filing of claim...

19 CFR 10.510 - Filing of claim for preferential tariff treatment upon importation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Filing of claim for preferential tariff treatment upon importation. 10.510 Section 10.510 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT... RATE, ETC. United States-Singapore Free Trade Agreement Import Requirements § 10.510 Filing of claim...

19 CFR 10.510 - Filing of claim for preferential tariff treatment upon importation.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Filing of claim for preferential tariff treatment upon importation. 10.510 Section 10.510 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT... RATE, ETC. United States-Singapore Free Trade Agreement Import Requirements § 10.510 Filing of claim...

Applying the design-build-test paradigm in microbiome engineering.

PubMed

Pham, Hoang Long; Ho, Chun Loong; Wong, Adison; Lee, Yung Seng; Chang, Matthew Wook

2017-12-01

The recently discovered roles of human microbiome in health and diseases have inspired research efforts across many disciplines to engineer microbiome for health benefits. In this review, we highlight recent progress in human microbiome research and how modifications to the microbiome could result in implications to human health. Furthermore, we discuss the application of a 'design-build-test' framework to expedite microbiome engineering efforts by reviewing current literature on three key aspects: design principles to engineer the human microbiome, methods to engineer microbiome with desired functions, and analytical techniques to examine complex microbiome samples. Copyright © 2017 Elsevier Ltd. All rights reserved.

New era / new solutions: The role of alternative tariff structures in water supply projects.

PubMed

Pinto, F Silva; Marques, R Cunha

2017-12-01

Water utilities face different challenges that may force them to seek prioritized objectives. When doing so, particular projects may have to be developed, being important to understand their impact on water tariffs, and thus, on customers. Such consequences may bear an increased relevance in cases stressed with, e.g., resource scarcity, poverty, and the need for infrastructure investments. The resulting cost and revenue variability demand a comprehensive study. If the first may require a stochastic modeling (in major cost components) in order to consider its inherent uncertainty, the second needs to be modeled following context-specific objectives set by the relevant stakeholders. The solutions achieved will likely promote distinct revenue sources, as well as diversified water tariff structures. A multi-objective optimization model (i.e., a Framework for Suitable Prices) is built to deal with those diversified requirements (e.g., stochastic energy costs, affordability, cost recovery, or administrative simplicity). The model is solved through achievement scalarizing functions with several weighting coefficients for a reference point, so as to provide a significant perception of possible revenue options (and their impact) to the decision makers. The proposed method is applied to a case study, Boa Vista Island in Cabo Verde, in which the background characteristics, namely water sources availability (e.g., the adoption of desalination technologies), economic development and other contextual factors were considered. The key role of tariff structure selection is displayed, instead of assuming it a priori, giving important insights regarding project feasibility. Copyright © 2017 Elsevier Ltd. All rights reserved.

Overcoming barriers to high performance seismic design using lessons learned from the green building industry

NASA Astrophysics Data System (ADS)

Glezil, Dorothy

NEHRP's Provisions today currently governing conventional seismic resistant design. These provisions, though they ensure the life-safety of building occupants, extensive damage and economic losses may still occur in the structures. This minimum performance can be enhanced using the Performance-Based Earthquake Engineering methodology and passive control systems like base isolation and energy dissipation systems. Even though these technologies and the PBEE methodology are effective reducing economic losses and fatalities during earthquakes, getting them implemented into seismic resistant design has been challenging. One of the many barriers to their implementation has been their upfront costs. The green building community has faced some of the same challenges that the high performance seismic design community currently faces. The goal of this thesis is to draw on the success of the green building industry to provide recommendations that may be used overcome the barriers that high performance seismic design (HPSD) is currently facing.

23 CFR 636.210 - What requirements apply to projects which use the modified design-build procedure?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false What requirements apply to projects which use the modified design-build procedure? 636.210 Section 636.210 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Selection Procedures, Award Criteria § 636.210 What requirements...

Sources of mineral raw materials for the production of building materials of the Republic of Sakha (Yakutia)

NASA Astrophysics Data System (ADS)

Burenina, O. N.; Savvinova, M. E.

2017-12-01

The paper outlines that in Yakutia, despite the availability of its own mineral resource base and a steady demand for concretes for various purposes, there are constraints to the development of industry, namely, the use of obsolete energy-intensive equipment and energy-consuming technologies, uneven dislocation of production capacities for the production of building materials on the territory of the republic, which significantly increases the cost of construction due to high tariffs of freight services.

The CO2 Reduction Potential of Combined Heat and Power in California's Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stadler, Michael; Marnay, Chris; Cardoso, Goncalo

2009-11-16

The Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) is working with the California Energy Commission (CEC) to determine the potential role of commercial sector distributed generation (DG) with combined heat and power (CHP) capability deployment in greenhouse gas emissions (GHG) reductions. CHP applications at large industrial sites are well known, and a large share of their potential has already been harvested. In contrast, relatively little attention has been paid to the potential of medium-sized commercial buildings, i.e., ones with peak electric loads ranging from 100 kW to 5 MW. We examine how this sector might implement DG with CHP inmore » cost minimizing microgrids that are able to adopt and operate various energy technologies, such as solar photovoltaics (PV), on-site thermal generation, heat exchangers, solar thermal collectors, absorption chillers, and storage systems. We apply a mixed-integer linear program (MILP) that minimizes a site's annual energy costs as its objective. Using 138 representative mid-sized commercial sites in California (CA), existing tariffs of three major electricity distribution ultilities plus a natural gas company, and performance data of available technology in 2020, we find the GHG reduction potential for this CA commercial sector segment, which represents about 35percent of total statewide commercial sector sales. Under the assumptions made, in a reference case, this segment is estimated to be capable of economically installing 1.4 GW of CHP, 35percent of the California Air Resources Board (CARB) statewide 4 GW goal for total incremental CHP deployment by 2020. However, because CARB's assumed utilization is far higherthan is found by the MILP, the adopted CHP only contributes 19percent of the CO2 target. Several sensitivity runs were completed. One applies a simple feed-in tariff similar to net metering, and another includes a generous self-generation incentive program (SGIP) subsidy for fuel cells. The feed

76 FR 15340 - Certain Festive Articles: Recommendations for Modifying the Harmonized Tariff Schedule of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-21

... INTERNATIONAL TRADE COMMISSION [Investigation No. 1205-9] Certain Festive Articles: Recommendations for Modifying the Harmonized Tariff Schedule of the United States AGENCY: United States International Trade Commission. ACTION: Change in date for transmitting recommendations to the President...

75 FR 75185 - Certain Festive Articles: Recommendations for Modifying the Harmonized Tariff Schedule of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-02

... INTERNATIONAL TRADE COMMISSION [Investigation No. 1205-9] Certain Festive Articles: Recommendations for Modifying the Harmonized Tariff Schedule of the United States AGENCY: United States International Trade Commission. ACTION: Change in date for transmitting recommendations to the President...

19 CFR 145.51 - Articles prohibited by section 305, Tariff Act of 1930.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Articles prohibited by section 305, Tariff Act of 1930. 145.51 Section 145.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND...) Obscene matter; (2) Articles for causing unlawful abortion (see § 145.52 for the treatment of literature...

19 CFR 145.51 - Articles prohibited by section 305, Tariff Act of 1930.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Articles prohibited by section 305, Tariff Act of 1930. 145.51 Section 145.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND...) Obscene matter; (2) Articles for causing unlawful abortion (see § 145.52 for the treatment of literature...

19 CFR 145.51 - Articles prohibited by section 305, Tariff Act of 1930.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Articles prohibited by section 305, Tariff Act of 1930. 145.51 Section 145.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND...) Obscene matter; (2) Articles for causing unlawful abortion (see § 145.52 for the treatment of literature...

19 CFR 145.51 - Articles prohibited by section 305, Tariff Act of 1930.

Code of Federal Regulations, 2011 CFR

2011-04-01