Sample records for teacher supplements transparency

  1. Psychology: Teacher Supplement.

    ERIC Educational Resources Information Center

    Stark, Rebecca

    This supplement provides teachers with tests, quizzes, answers to questions in the text, and general teaching information for using the student text, "Psychology," by Rebecca Stark. Quizzes included are on the topics of human development; the nervous system; the brain; cognitive development; sensation and perception; conditioning; learning;…

  2. A Narrative Inquiry of Teacher Retention in Supplemental Education

    ERIC Educational Resources Information Center

    Saint, April

    2012-01-01

    Teacher retention in supplemental education, or for-profit, center-based tutoring, is a concern. As yet, no studies in the past 20 years have examined teacher retention in supplemental education. The importance of this research study was to give voice to supplemental educators' experiences in center-based tutoring through narrative inquiry. The…

  3. A Study of Transparent Plastics for use on Aircraft. Supplement

    NASA Technical Reports Server (NTRS)

    Axilrod, Benjamin M.; Kline, Gordon M.

    1937-01-01

    This supplement to a NACA study issued in May 1937 entitled "A Study of Transparent Plastics for Use on Aircraft", contains two tables. These tables contain data on bursting strengths of plastics, particularly at low temperatures. Table 1 contains the values reported in a table of the original memorandum, and additional values obtained at approximately 25 C, for three samples of Acrylate resin. The second table contains data obtained for the bursting strength when one surface of the plastic was cooled to approximately -35 C.

  4. 75 FR 11171 - Transparency Provisions of Section 23 of the Natural Gas Act; Supplemental Notice to Form No. 552...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-10

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM07-10-002] Transparency Provisions of Section 23 of the Natural Gas Act; Supplemental Notice to Form No. 552 Technical Conference March 1, 2010. As announced in the Notice of Technical Conference issued on February 22, 2010, a...

  5. Environment. Events, Assessment, Response. [Student Textbook and] Teacher Supplement.

    ERIC Educational Resources Information Center

    Koenig, Herbert G.; Fairbanks, Eugene B.

    This student textbook and accompanying teacher supplement strive to provide objective instruction in global environmental issues. Twenty-six study units present facts, opinions, and consequences of environmental issues, as well as responses which have been, and could be, made to the environmental issues. Each unit is introduced by a newspaper…

  6. Badger History, Vol. 31, No. 2, November 1977. Tracing Your Roots [And] Teacher Supplement.

    ERIC Educational Resources Information Center

    Kanetzke, Howard W., Ed.

    Elementary school pupils are introduced to a genealogical approach to state and local history. Although the examples in the booklet pertain to Wisconsin, the format can be easily adapted for classroom use by teachers in other locations. A teacher's supplement accompanies the booklet and offers a bibliography, background information, additional…

  7. Activity Supplement for Puedo Leer: Teacher's Guide and Use of Charts. Program for Initial Reading in Spanish for Bilingual Children.

    ERIC Educational Resources Information Center

    Lopez, Sara

    This activity supplement is intended to accompany the Puedo Leer/I Can Read Teacher's Guide for initial reading in Spanish for bilingual children. The supplement, which consists of a teacher's guide and a set of charts on card stock, provides suggestions for a wide variety of pre-reading activities and approaches, which expand on the activities…

  8. Project on Teaching Charts and Graphs to ABE Students. Part I: Teacher's Guide [and] Part II: Transparency Assembly Package.

    ERIC Educational Resources Information Center

    Renton Vocational Inst., WA.

    The teacher's guide and collection of transparency masters are designed for use in teaching adult basic education (ABE) students how to read and interpret graphs and charts. Covered in the individual lessons of the instructional unit are the reading and interpretation of charts as well as picture, line, bar, and circle graphs. Each unit contains a…

  9. Transparency Masters for Crop and Weed Identification. Final Report.

    ERIC Educational Resources Information Center

    Miller, Dwane G.; And Others

    Instructional aids produced from these transparency masters and the accompanying narrative may be used by vocational agriculture teachers in presenting courses in plant science. They were developed by subject matter specialists and teacher educators as part of a project designed to test effects of involving vocational agriculture teachers in…

  10. Teacher Perceptions of Music as a Supplemental Teaching Method for Reading and Literacy

    ERIC Educational Resources Information Center

    Monroe, Ronald J.

    2017-01-01

    Supplemental instructional methods are needed to help students achieve grade-level proficiency in reading and literacy in inner-city elementary schools. Teachers employ music concepts and skills during literacy instruction as a motivator for students to acquire proficiency in literacy and reading. Interviews, informal observations and focus group…

  11. Miller Creek Demonstration Forest ecology activities - a teachers supplement to the field guide

    Treesearch

    Bill Schustrom; Reed Kuennen; Raymond C. Shearer

    1998-01-01

    Miller Creek, on the Flathead National Forest in northwestern Montana, is a demonstration forest, showing up to 30 years of forest change. This teachers supplement to the educational field guide (Miller Creek Demonstration Forest - a forest born of fire: a field guide; Gen. Tech. Rep. RMRS-GTR-7, 1998) outlines eight field and classroom activities that teach students a...

  12. Advanced Placement (AP) Social Studies Teachers' Use of Academic Course Blogs as a Supplemental Resource for Student Learning

    ERIC Educational Resources Information Center

    Alper, Seth M.

    2013-01-01

    This mixed-methods study investigated the relationship between Advanced Placement (AP) social studies teachers' utilization of academic course blogs and student achievement. Simultaneously, the study examined the participating teachers' perceptions on the use of course blogs and other social media as supplemental learning resources. The…

  13. Dinosaurs and Power Plants. Energy from the Past for the Future. Teacher's Lesson Plan and Activity Guide; Teacher's Guide Supplement of Reproducible Graphics.

    ERIC Educational Resources Information Center

    Department of Energy, Washington, DC. Office of Fossil Energy.

    This teacher's guide and its accompanying supplement were prepared for use with the U.S. Department of Energy's Dinosaurs and Power Plants, a publication designed for students in grades 5-8 about the history, detection, extraction, transportation, use, environmental problem/solutions, and future of fossil energy. The study of energy science shows…

  14. Development of a Relationship-Focused Supplement to Accompany the Holy Nation Citizenship Curriculum for Training Teachers

    ERIC Educational Resources Information Center

    Hameloth, Nancy J.

    2010-01-01

    The purpose of this dissertation is to develop a relationship-focused supplement for teachers to accompany the Holy Nation Citizenship (HNC) curriculum. Recent studies have confirmed the need for nurturing relationships in childhood and beyond for proper psychological, emotional, and academic development. This emphasis on the power of nurturing…

  15. Supplement to Art for Elementary Schools.

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, Rockville, MD.

    The document provides art activities for the classroom teacher who is not an art specialist. It contains activities which supplement experiences provided by the art teacher as well as activities designed to measure the achievement level of students in concept skills related to art and the principles of design. The supplement is divided into three…

  16. The Impact of Science Integrated Curriculum Supplements on Early Childhood Teachers' Attitudes and Beliefs towards Science while In-Service: A Multiple Case

    NASA Astrophysics Data System (ADS)

    Collins, Kellian L.

    Science at the early childhood level has been rarely taught as a single subject or integrated into the curriculum. One reason why early childhood educators avoid teaching science are their attitudes, beliefs, and lack of understanding scientific concepts as presented in traditional science curriculums. The intervention used by researchers for improving beliefs and attitudes in K-6 pre-service teachers towards teaching science in early childhood has been science method courses. For in service teachers, the intervention has been professional development workshops, seminars, and symposiums. Though these interventions have had a positive impact on teachers' attitudes and beliefs toward teaching science, the interventions have not necessarily guaranteed more science being taught in the preschool classroom. The specific problem investigated for this study was how to improve the interventions designed to improve preschool teachers' attitudes and beliefs so that they would feel more confident in teaching science to young children. The purpose of this study was to examine how implementing a one-week science integrated curriculum supplement could be an effective tool for improving preschool teachers' attitudes and beliefs toward teaching science. This study utilized the qualitative multiple case study research method. A logical model was created based on negative teacher attitudes and beliefs attributes that were the core components of the Preschool Teachers' Attitudes and Beliefs toward Science teaching (P-TABS) questionnaire. The negative attributes were paired with positive interventions and encapsulated in a one-week science integrated curriculum supplement based on the factors of teacher comfort, child benefit and challenges. The primary source of evidence for this study was the semi-structured interview. The researcher contacted 24 early childhood facilities, 44 emails were sent to preschool teachers, four teachers agreed to participate in the study. The results of the

  17. The Value of Transparency in Distributed Solar PV Markets

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    OShaughnessy, Eric J.; Margolis, Robert M.

    Distributed solar photovoltaic (PV) markets are relatively non-transparent: PV price and product information is not readily available, searching for this information is costly (in terms of time and effort), and customers are mostly unfamiliar with the new technology. Quote aggregation, where third-party companies collect PV quotes on behalf of customers, may be one way to increase PV market transparency. In this paper, quote aggregation data are analyzed to study the value of transparency for distributed solar PV markets. The results suggest that easier access to more quotes results in lower prices. We find that installers tend to offer lower pricesmore » in more competitive market environments. We supplement the empirical analysis with key findings from interviews of residential PV installers.« less

  18. Family Living Supplement.

    ERIC Educational Resources Information Center

    Truitt, Debbie

    This family living supplement contains 125 supplemental ideas and strategies designed to help vocational home economics teachers increase student motivation and enrich the teaching process. Ideas and strategies are organized into seven sections. These are career planning, securing a job, and career success; managing financial resources, buying…

  19. The Open-Door Policy: Transparency Minimizes Conflicts between School Principals and Staff

    ERIC Educational Resources Information Center

    Klein, Joseph

    2012-01-01

    Purpose: Little has been written about the contribution of organizational transparency to reduction of conflict between principals and teachers, especially when clarification justifies seemingly unreasonable demands by the administration. The purpose of this paper is to fill this gap. Design/methodology/approach: In total, 294 teachers from 59…

  20. Aircraft Transparency Failure and Logistical Cost Analysis - Supplemental Study

    DTIC Science & Technology

    1979-06-01

    trude studies, air logistics centers, A/F operational base level, vFM\\66-1 IDC M,44s, field audits , glazing materials, sealants 26. AOSTRACT (C oInu...W. R. Marshall of Reli- ability; and R. M. Hiyvaw, Mass Properties. The author wishes to thank the field audit contacts in the Air Force, in the...obtained from ALC’s and from field , audits , etc. do provide a data base from which predominant transpar- i ency maintenance problem- can be

  1. Exploring PE Teachers' "Gut Feelings": An Attempt to Verbalise and Discuss Teachers' Internalised Grading Criteria

    ERIC Educational Resources Information Center

    Svennberg, Lena; Meckbach, Jane; Redelius, Karin

    2014-01-01

    Research shows that teachers' grading is influenced by non-achievement factors in addition to official criteria, such as knowledge and skills. Some grading criteria are internalised by the teacher, who is sometimes unable to verbalise the criteria used and refers to what is called a "gut feeling". Therefore, transparency, validity and…

  2. TEDS-M 2008 User Guide for the International Database. Supplement 3: Variables Derived from the Educator and Future Teacher Data

    ERIC Educational Resources Information Center

    Brese, Falk, Ed.

    2012-01-01

    This supplement contains documentation on all the derived variables contained in the TEDS-M educator and future teacher data files. These derived variables were used to report data in the TEDS-M international reports. The variables that constitute the scales and indices are made available as part of the TEDS-M International Database to be used in…

  3. Supplements to Textbook Materials.

    ERIC Educational Resources Information Center

    Holmes, Ken

    1994-01-01

    Describes the many kinds of materials that English teachers can draw upon to enrich and expand students' experiences with literature. Outlines ancillary materials used to supplement the study of William Shakespeare's "Julius Caesar." (HB)

  4. Enhanced Nutrition Education Instead of Consuming Supplements

    ERIC Educational Resources Information Center

    Crowder, Todd; Kidd, Kellie; Jensen, Nancy; Jensen, Laura

    2008-01-01

    Fueled by the internet, instantaneous videos, and the emphasis to look "right" or always win athletic competitions, many students are seeking information on nutrition and dietary supplements. Classroom observations reveal student interest and discussions are among the highest when the topic is dietary supplements. Teachers and coaches provide an…

  5. 76 FR 1180 - FDA Transparency Initiative: Improving Transparency to Regulated Industry

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-07

    ...] FDA Transparency Initiative: Improving Transparency to Regulated Industry AGENCY: Food and Drug... the Transparency Initiative, the Food and Drug Administration (FDA) is announcing the availability of a report entitled ``FDA Transparency Initiative: Improving Transparency to Regulated Industry.'' The...

  6. The Golden Lady: The Storied Life of a Multilingual Teacher and Author of Supplemental Reading Materials in a Marginalized South African Language

    ERIC Educational Resources Information Center

    Horan, Deborah A.; Sailors, Misty; Martinez, Miriam; Skerrett, Allison; Makalela, Leketi

    2012-01-01

    Personal narratives can be powerful venues for understanding human experiences. In this paper, we tell the story of Lutanyani, a Black South African multilingual teacher and author of supplemental reading materials in a marginalized South African language. Through various word images, we convey the role of language, in particular written language,…

  7. Inquiry experiences as a lecture supplement for preservice elementary teachers and general education students

    NASA Astrophysics Data System (ADS)

    Marshall, Jill A.; Dorward, James T.

    2000-07-01

    The study reported here was designed to substantiate the findings of previous research on the use of inquiry-based laboratory activities in introductory college physics courses. The authors sought to determine whether limited use of inquiry activities as a supplement to a traditional lecture and demonstration curriculum would improve student achievement in introductory classes for preservice teachers and general education students. Achievement was measured by responses to problems designed to test conceptual understanding as well as overall course grades. We analyzed the effect on selected student outcome measures in a preliminary study in which some students engaged in inquiry activities and others did not, and interviewed students about their perceptions of the inquiry activities. In the preliminary study, preservice elementary teachers and female students showed significantly higher achievement after engaging such activities, but only on exam questions relating directly to the material covered in the exercises. In a second study we used a common exam problem to compare the performance of students who had engaged in a revised version of the inquiry activities with the performance of students in algebra and calculus-based classes. The students who had engaged in inquiry investigations significantly outperformed the other students.

  8. Aquaculture. Teacher Edition.

    ERIC Educational Resources Information Center

    Walker, Susan S.

    This color-coded guide was developed to assist teachers in helping interested students plan, build, stock, and run aquaculture facilities of varied sizes. The guide contains 15 instructional units, each of which includes some or all of the following basic components: objective sheet, suggested activities for the teacher, instructor supplements,…

  9. Service Learning in the Middle School Curriculum: Supplement.

    ERIC Educational Resources Information Center

    Schukar, Ron; Singleton, Laurel; Parisi, Lynn

    This supplement contains five unit summaries on service learning that were developed during the 1996 summer institutes conducted by the Social Science Education Consortium (SSEC) for teams of middle school teachers selected from the western United States. Each unit summary in the supplement has been developed to correspond in style to unit…

  10. Transparent lithium-ion batteries

    PubMed Central

    Yang, Yuan; Jeong, Sangmoo; Hu, Liangbing; Wu, Hui; Lee, Seok Woo; Cui, Yi

    2011-01-01

    Transparent devices have recently attracted substantial attention. Various applications have been demonstrated, including displays, touch screens, and solar cells; however, transparent batteries, a key component in fully integrated transparent devices, have not yet been reported. As battery electrode materials are not transparent and have to be thick enough to store energy, the traditional approach of using thin films for transparent devices is not suitable. Here we demonstrate a grid-structured electrode to solve this dilemma, which is fabricated by a microfluidics-assisted method. The feature dimension in the electrode is below the resolution limit of human eyes, and, thus, the electrode appears transparent. Moreover, by aligning multiple electrodes together, the amount of energy stored increases readily without sacrificing the transparency. This results in a battery with energy density of 10 Wh/L at a transparency of 60%. The device is also flexible, further broadening their potential applications. The transparent device configuration also allows in situ Raman study of fundamental electrochemical reactions in batteries. PMID:21788483

  11. Classroom Activities to Make Aquifers Transparent

    NASA Astrophysics Data System (ADS)

    Coughlin, J. P.; Mays, D. C.

    2016-12-01

    Many studies have shown that in-class hands-on activities help K-12 students gain a deeper conceptual understanding for the subject matter. With funding from the National Science Foundation, the University of Colorado Denver is working to increase the availability of groundwater-related hands-on activities in TeachEngineering, a peer-reviewed online database of searchable lesson plans for use by K-12 teachers and other educators. In this presentation, we would like to present and solicit feedback on groundwater-related hands-on demonstrations such as quicksand, infiltration into porous pavement, or using refractive index matching to render transparent porous media that allow lasers to measure flow within model groundwater aquifers.

  12. Education Quality and Teacher Salary.

    ERIC Educational Resources Information Center

    Land, Arthur J.

    In view of the emphasis on money as a motivator mentioned in reports examining theoretical notions about teacher motivation, this paper focuses on the efficacy of using salary to attract quality teacher candidates. Although standarized testing and internship programs often supplement inadequate certification requirements, critics question the…

  13. Home Economics Education Handbook. Teacher Trainee Program.

    ERIC Educational Resources Information Center

    Jax, Judy A., Comp.

    Developed for cooperating teachers and teacher trainees working with the University of Wisconsin-Stout's Home Economics Education Program, this handbook is intended as a reference which may supplement the guidance given by the cooperating teacher, principal, college supervisor or other personnel involved in the guidance and evaluation of teacher…

  14. The art of transparency.

    PubMed

    Sayim, Bilge; Cavanagh, Patrick

    2011-01-01

    Artists throughout the ages have discovered a number of techniques to depict transparency. With only a few exceptions, these techniques follow closely the properties of physical transparency. The two best known properties are X-junctions and the luminance relations described by Metelli. X-junctions are seen where the contours of a transparent material cross contours of the surface behind; Metelli's constraints on the luminance relations between the direct and filtered portions of the surface specify a range of luminance values that are consistent with transparency. These principles have been used by artists since the time of ancient Egypt. However, artists also discovered that stimuli can be seen as transparent even when these physical constraints are not met. Ancient Greek artists, for example, were able to depict transparent materials in simple black-and-white line drawings. Artists also learned how to represent transparency in cases where neither X-junctions nor Metelli's constraints could apply: for example, where no portions of the objects behind the transparent material extend beyond it. Many painters convincingly portrayed transparency in these cases by depicting the effects the transparent medium would have on material or object properties. Here, we show how artists employed these and other techniques revealing their anticipation of current formalizations of perceived transparency, and we suggest new, as-yet-untested principles.

  15. The art of transparency

    PubMed Central

    Sayim, Bilge; Cavanagh, Patrick

    2011-01-01

    Artists throughout the ages have discovered a number of techniques to depict transparency. With only a few exceptions, these techniques follow closely the properties of physical transparency. The two best known properties are X-junctions and the luminance relations described by Metelli. X-junctions are seen where the contours of a transparent material cross contours of the surface behind; Metelli's constraints on the luminance relations between the direct and filtered portions of the surface specify a range of luminance values that are consistent with transparency. These principles have been used by artists since the time of ancient Egypt. However, artists also discovered that stimuli can be seen as transparent even when these physical constraints are not met. Ancient Greek artists, for example, were able to depict transparent materials in simple black-and-white line drawings. Artists also learned how to represent transparency in cases where neither X-junctions nor Metelli's constraints could apply: for example, where no portions of the objects behind the transparent material extend beyond it. Many painters convincingly portrayed transparency in these cases by depicting the effects the transparent medium would have on material or object properties. Here, we show how artists employed these and other techniques revealing their anticipation of current formalizations of perceived transparency, and we suggest new, as-yet-untested principles. PMID:23145252

  16. Plasmonic transparent conductors

    NASA Astrophysics Data System (ADS)

    Liapis, Andreas C.; Sfeir, Matthew Y.; Black, Charles T.

    2016-09-01

    Many of today's technological applications, such as solar cells, light-emitting diodes, displays, and touch screens, require materials that are simultaneously optically transparent and electrically conducting. Here we explore transparent conductors based on the excitation of surface plasmons in nanostructured metal films. We measure both the optical and electrical properties of films perforated with nanometer-scale features and optimize the design parameters in order to maximize optical transmission without sacrificing electrical conductivity. We demonstrate that plasmonic transparent conductors can out-perform indium tin oxide in terms of both their transparency and their conductivity.

  17. Introduction to Agricultural Sales and Service. Teacher Edition.

    ERIC Educational Resources Information Center

    Kauer, Les

    This Oklahoma curriculum guide contains 12 units. Each instructional unit includes some or all of these components: performance objectives, suggested activities, basic academic skills taxonomy, handouts, information sheets, supplements, transparency masters, activity sheets, assignment sheets, assignment sheet answers, job sheets, practical tests,…

  18. Soils. Transparency Masters.

    ERIC Educational Resources Information Center

    Clemson Univ., SC. Vocational Education Media Center.

    This document is a collection of 43 overhead transparency masters to be used as teaching aids in a course of study involving soils such as geology, agronomy, hydrology, earth science, or land use study. Some transparencies are in color. Selected titles of transparencies may give the reader a better understanding of the graphic content. Titles are:…

  19. Teacher's Guide to "Artes Latinae".

    ERIC Educational Resources Information Center

    Masciantonio, Rudolph; And Others

    The purpose of this guide is to assist teachers in the classroom utilization of "Artes Latinae", the Encyclopaedia Britannica Latin instructional system. This guide is intended as a supplement to the publisher's teacher's manual and presupposes familiarity with it. Stress has been placed on the early units of the textbook, since the inexperienced…

  20. Basic Facialist. Teacher Edition. Cosmetology Series.

    ERIC Educational Resources Information Center

    Rogers, Jeanette A.

    This Oklahoma curriculum guide contains six units. Each instructional unit includes some or all of these basic components: performance objectives; suggested activities for the teacher; pretest; handouts; information sheets; transparency masters; assignment sheets; job sheets; practical tests; written tests; and answers to pretest, assignment…

  1. Transparencies on Light: Teacher's Manual. Research Series No. 130.

    ERIC Educational Resources Information Center

    Anderson, Charles W.; Smith, Edward L.

    Results of observations and of students' performance on pretest/posttests suggest that almost all students enter the fifth grade with certain fundamental misconceptions about light and how people see. Unfortunately, fifth grade science textbooks often fail to inform teachers about these misconceptions or to suggest a teaching strategy that will…

  2. Transparent 'solution' of ultrathin magnesium hydroxide nanocrystals for flexible and transparent nanocomposite films.

    PubMed

    Wang, Jie-Xin; Sun, Qian; Chen, Bo; Wu, Xi; Zeng, Xiao-Fei; Zhang, Cong; Zou, Hai-Kui; Chen, Jian-Feng

    2015-05-15

    Transparent solutions of nanocrystals exhibit many unique properties, and are thus attractive materials for numerous applications. However, the synthesis of transparent nanocrystal solutions of magnesium hydroxide (MH) with wide applications is yet to be realized. Here, we report a facile two-step process, which includes a direct reactive precipitation in alcohol phase instead of aqueous phase combined with a successive surface modification, to prepare transparent alcohol solutions containing lamellar MH nanocrystals with an average size of 52 nm and an ultrathin thickness of 1-2 nm, which is the thinnest MH nanoplatelet reported in the literatures. Further, highly flexible and transparent nanocomposite films are fabricated with a solution mixing method by adding the transparent MH nanocrystal solutions into PVB solution. Considering the simplicity of the fabrication process, high transparency and good flexibility, this MH/polymer nanocomposite film is promising for flame-resistant applications in plastic electronics and optical devices with high transparency, such as flexible displays, optical filters, and flexible solar cells.

  3. Consumers' perceptions of the dietary supplement health and education act: implications and recommendations.

    PubMed

    Dodge, Tonya

    2016-01-01

    In 1994, the United States Congress passed the Dietary Supplement Health and Education Act (DSHEA). The regulatory framework for dietary supplements created by DSHEA has led to significant misperceptions regarding consumers' understanding of the safety and efficacy of supplements. Research shows that consumers erroneously believe that: (1) supplements are approved by the government, (2) supplements have been tested for safety and effectiveness, (3) the content of supplements is analyzed, and (4) manufacturers are required to disclose known adverse effects to consumers. Furthermore, labelling requirements that are intended to provide transparency to consumers are relatively ineffective. The following four recommendations are offered for reforming DSHEA: (1) only allow structure-function claims that are supported by research evidence, (2) require manufacturers to list known adverse effects on the labels of dietary supplements, (3) require that the Food and Drug Administration analyzes the content of dietary supplements and (4) restrict the definition of dietary ingredients. These recommendations would bring DSHEA to more closely align with consumer expectations regarding the regulation of dietary supplements and would likely provide a safer landscape for the use of supplements. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

  4. Fabrication of fully transparent nanowire transistors for transparent and flexible electronics

    NASA Astrophysics Data System (ADS)

    Ju, Sanghyun; Facchetti, Antonio; Xuan, Yi; Liu, Jun; Ishikawa, Fumiaki; Ye, Peide; Zhou, Chongwu; Marks, Tobin J.; Janes, David B.

    2007-06-01

    The development of optically transparent and mechanically flexible electronic circuitry is an essential step in the effort to develop next-generation display technologies, including `see-through' and conformable products. Nanowire transistors (NWTs) are of particular interest for future display devices because of their high carrier mobilities compared with bulk or thin-film transistors made from the same materials, the prospect of processing at low temperatures compatible with plastic substrates, as well as their optical transparency and inherent mechanical flexibility. Here we report fully transparent In2O3 and ZnO NWTs fabricated on both glass and flexible plastic substrates, exhibiting high-performance n-type transistor characteristics with ~82% optical transparency. These NWTs should be attractive as pixel-switching and driving transistors in active-matrix organic light-emitting diode (AMOLED) displays. The transparency of the entire pixel area should significantly enhance aperture ratio efficiency in active-matrix arrays and thus substantially decrease power consumption.

  5. Fabrication of fully transparent nanowire transistors for transparent and flexible electronics.

    PubMed

    Ju, Sanghyun; Facchetti, Antonio; Xuan, Yi; Liu, Jun; Ishikawa, Fumiaki; Ye, Peide; Zhou, Chongwu; Marks, Tobin J; Janes, David B

    2007-06-01

    The development of optically transparent and mechanically flexible electronic circuitry is an essential step in the effort to develop next-generation display technologies, including 'see-through' and conformable products. Nanowire transistors (NWTs) are of particular interest for future display devices because of their high carrier mobilities compared with bulk or thin-film transistors made from the same materials, the prospect of processing at low temperatures compatible with plastic substrates, as well as their optical transparency and inherent mechanical flexibility. Here we report fully transparent In(2)O(3) and ZnO NWTs fabricated on both glass and flexible plastic substrates, exhibiting high-performance n-type transistor characteristics with approximately 82% optical transparency. These NWTs should be attractive as pixel-switching and driving transistors in active-matrix organic light-emitting diode (AMOLED) displays. The transparency of the entire pixel area should significantly enhance aperture ratio efficiency in active-matrix arrays and thus substantially decrease power consumption.

  6. Teaching the Teachers: Peer Observations in Elementary Classrooms

    ERIC Educational Resources Information Center

    Schenk, Matthew D.

    2016-01-01

    The United States is facing an unprecedented teacher shortage. With many studies estimating that 17-33% of teachers leave the profession within their first five years of starting a career, something needs to change to keep new teachers in the classroom. This study evaluates the effectiveness of peer observation as a learning tool to supplement the…

  7. A TEACHER'S GUIDE FOR ADULT BASIC EDUCATION.

    ERIC Educational Resources Information Center

    BROWN, ANTRONETTE

    COMPILED AS AN IDEA AND INFORMATION GUIDE FOR TEACHERS OF ADULT BASIC EDUCATION, THIS DOCUMENT INCLUDES DETAILED TEACHING OBJECTIVES, METHODS, AND MATERIALS (FILMS, FILMSTRIPS, BOOKS, TRANSPARENCIES). THE COURSE INCLUDES (1) READING AND COMMUNICATION SKILLS--PHONICS, VOCABULARY, REFERENCE, AND SO ON, (2) SOCIAL STUDIES--GOVERNMENT, GEOGRAPHY,…

  8. Teacher Perceptions of an Online Tutoring Program for Elementary Mathematics

    ERIC Educational Resources Information Center

    Whetstone, Patti; Clark, Amy; Flake, Mari Wheeler

    2014-01-01

    This study explores elementary teacher perceptions related to the implementation of an online tutoring program. Teachers were surveyed regarding factors that affected use of the online tutoring program as a supplement to mathematics instruction. Results indicated that teachers overwhelmingly reported positive views of the training and support…

  9. The Stealth Curriculum: Manipulating America's History Teachers

    ERIC Educational Resources Information Center

    Stotsky, Sandra

    2004-01-01

    The purpose of this report is: (1) To point out the features of a number of manipulative supplemental resources for history and social studies teachers; and (2) to show how similarly manipulative professional development workshops propagate the distorted content and recommended teaching practices of such materials to teachers and their…

  10. Tape It Yourself: Videotapes for Teacher Education

    ERIC Educational Resources Information Center

    Ebsworth, Miriam Eistein; Feknous, Barbara; Loyet, Dianne; Zimmerman, Spencer

    2004-01-01

    This paper describes the development and implementation of a series of videotapes of ESL classes for a pre-service teacher education program grounded in experiential learning theory. The videos included footage of ESL classrooms, and tapes edited and supplemented with interviews of ESL teachers. Our experience demonstrates that-with relatively low…

  11. Hazy Transparent Cellulose Nanopaper

    PubMed Central

    Hsieh, Ming-Chun; Koga, Hirotaka; Suganuma, Katsuaki; Nogi, Masaya

    2017-01-01

    The aim of this study is to clarify light scattering mechanism of hazy transparent cellulose nanopaper. Clear optical transparent nanopaper consists of 3–15 nm wide cellulose nanofibers, which are obtained by the full nanofibrillation of pulp fibers. At the clear transparent nanopaper with 40 μm thickness, their total transmittance are 89.3–91.5% and haze values are 4.9–11.7%. When the pulp fibers are subjected to weak nanofibrillation, hazy transparent nanopapers are obtained. The hazy transparent nanopaper consists of cellulose nanofibers and some microsized cellulose fibers. At the hazy transparent nanopaper with 40 μm thickness, their total transmittance were constant at 88.6–92.1% but their haze value were 27.3–86.7%. Cellulose nanofibers are solid cylinders, whereas the pulp fibers are hollow cylinders. The hollow shape is retained in the microsized cellulose fibers, but they are compressed flat inside the nanopaper. This compressed cavity causes light scattering by the refractive index difference between air and cellulose. As a result, the nanopaper shows a hazy transparent appearance and exhibits a high thermal durability (295–305 °C), and low thermal expansion (8.5–10.6 ppm/K) because of their high density (1.29–1.55 g/cm3) and crystallinity (73–80%). PMID:28128326

  12. High Temperature Transparent Furnace Development

    NASA Technical Reports Server (NTRS)

    Bates, Stephen C.

    1997-01-01

    This report describes the use of novel techniques for heat containment that could be used to build a high temperature transparent furnace. The primary objective of the work was to experimentally demonstrate transparent furnace operation at 1200 C. Secondary objectives were to understand furnace operation and furnace component specification to enable the design and construction of a low power prototype furnace for delivery to NASA in a follow-up project. The basic approach of the research was to couple high temperature component design with simple concept demonstration experiments that modify a commercially available transparent furnace rated at lower temperature. A detailed energy balance of the operating transparent furnace was performed, calculating heat losses through the furnace components as a result of conduction, radiation, and convection. The transparent furnace shells and furnace components were redesigned to permit furnace operation at at least 1200 C. Techniques were developed that are expected to lead to significantly improved heat containment compared with current transparent furnaces. The design of a thermal profile in a multizone high temperature transparent furnace design was also addressed. Experiments were performed to verify the energy balance analysis, to demonstrate some of the major furnace improvement techniques developed, and to demonstrate the overall feasibility of a high temperature transparent furnace. The important objective of the research was achieved: to demonstrate the feasibility of operating a transparent furnace at 1200 C.

  13. Perceptual transparency from image deformation.

    PubMed

    Kawabe, Takahiro; Maruya, Kazushi; Nishida, Shin'ya

    2015-08-18

    Human vision has a remarkable ability to perceive two layers at the same retinal locations, a transparent layer in front of a background surface. Critical image cues to perceptual transparency, studied extensively in the past, are changes in luminance or color that could be caused by light absorptions and reflections by the front layer, but such image changes may not be clearly visible when the front layer consists of a pure transparent material such as water. Our daily experiences with transparent materials of this kind suggest that an alternative potential cue of visual transparency is image deformations of a background pattern caused by light refraction. Although previous studies have indicated that these image deformations, at least static ones, play little role in perceptual transparency, here we show that dynamic image deformations of the background pattern, which could be produced by light refraction on a moving liquid's surface, can produce a vivid impression of a transparent liquid layer without the aid of any other visual cues as to the presence of a transparent layer. Furthermore, a transparent liquid layer perceptually emerges even from a randomly generated dynamic image deformation as long as it is similar to real liquid deformations in its spatiotemporal frequency profile. Our findings indicate that the brain can perceptually infer the presence of "invisible" transparent liquids by analyzing the spatiotemporal structure of dynamic image deformation, for which it uses a relatively simple computation that does not require high-level knowledge about the detailed physics of liquid deformation.

  14. Lignin-Retaining Transparent Wood.

    PubMed

    Li, Yuanyuan; Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin; Berglund, Lars

    2017-09-11

    Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light-transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high-lignin-content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK -1 , and work-tofracture of 1.2 MJ m -3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy-saving buildings. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

  15. Lignin‐Retaining Transparent Wood

    PubMed Central

    Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin

    2017-01-01

    Abstract Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light‐transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high‐lignin‐content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK−1, and work‐tofracture of 1.2 MJ m−3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy‐saving buildings. PMID:28719095

  16. Semi-transparent solar cells

    NASA Astrophysics Data System (ADS)

    Sun, J.; Jasieniak, J. J.

    2017-03-01

    Semi-transparent solar cells are a type of technology that combines the benefits of visible light transparency and light-to-electricity conversion. One of the biggest opportunities for such technologies is in their integration as windows and skylights within energy-sustainable buildings. Currently, such building integrated photovoltaics (BIPV) are dominated by crystalline silicon based modules; however, the opaque nature of silicon creates a unique opportunity for the adoption of emerging photovoltaic candidates that can be made truly semi-transparent. These include: amorphous silicon-, kesterite-, chalcopyrite-, CdTe-, dye-sensitized-, organic- and perovskite- based systems. For the most part, amorphous silicon has been the workhorse in the semi-transparent solar cell field owing to its established, low-temperature fabrication processes. Excitement around alternative classes, particularly perovskites and the inorganic candidates, has recently arisen because of the major efficiency gains exhibited by these technologies. Importantly, each of these presents unique opportunities and challenges within the context of BIPV. This topic review provides an overview into the broader benefits of semi-transparent solar cells as building-integrated features, as well as providing the current development status into all of the major types of semi-transparent solar cells technologies.

  17. Water Matters. Water Resources Teacher's Guide, Vol. 1.

    ERIC Educational Resources Information Center

    Kauffman, Sue Cox

    This teachers guide is designed to accompany a series of posters developed through the U.S. Geological Survey's Water Resources Education Initiative, a cooperative effort between public and private education interests. It provides teacher guidance, background information, suggestions for a variety of classroom activities, and supplemental resource…

  18. Project Physics Teacher Guide 6, The Nucleus.

    ERIC Educational Resources Information Center

    Harvard Univ., Cambridge, MA. Harvard Project Physics.

    Teaching procedures of Project Physics Unit 6 are presented to help teachers make effective use of learning materials. Unit contents are discussed in connection with teaching aid lists, multi-media schedules, schedule blocks, and resource charts. Brief summaries are made for transparencies, 16mm films, and reader articles. Included is information…

  19. Measurement. Teacher's Guide. Small Engine Repair Series.

    ERIC Educational Resources Information Center

    East Texas State Univ., Commerce. Occupational Curriculum Lab.

    This teacher's guide is part of an instructional series on small engine repair that is intended for use with mentally retarded and learning disabled students in general mechanical repair programs. Notes to the instructor cover equipment needed, preparation before teaching, and use of evaluation charts, transparency masters, audiovisual(s), and…

  20. Second-order nonlinearity induced transparency.

    PubMed

    Zhou, Y H; Zhang, S S; Shen, H Z; Yi, X X

    2017-04-01

    In analogy to electromagnetically induced transparency, optomechanically induced transparency was proposed recently in [Science330, 1520 (2010)SCIEAS0036-807510.1126/science.1195596]. In this Letter, we demonstrate another form of induced transparency enabled by second-order nonlinearity. A practical application of the second-order nonlinearity induced transparency is to measure the second-order nonlinear coefficient. Our scheme might find applications in quantum optics and quantum information processing.

  1. Daily Report, Supplement, East Europe

    DTIC Science & Technology

    1993-06-30

    REPRODUCED BY U.S. DEPARTMENT OF COMMERCE NATIONAL TECHNICAL INFORMATION SERVICE SPRINGFIELD, VA 22161 East Europe SUPPLEMENT JPRS-EER-93-060-S...appointed deputy director of the National Agency for Protection of the Constitution. Traditionally there were Turks in the division. My teacher was a... nation . This is accomplished through consistent policy, while ours has been exactly the opposite: incon- sistent. The generation of Turkish intelligence

  2. Transparent conductive coatings

    NASA Technical Reports Server (NTRS)

    Ashok, S.

    1983-01-01

    Thin film transparent conductors are discussed. Materials with electrical conductivity and optical transparency are highly desirable in many optoelectronic applications including photovoltaics. Certain binary oxide semiconductors such as tin oxide (SnO2) and indium oxide (In2O3) offer much better performance tradeoff in optoelectronics as well as better mechanical and chemical stability than thin semitransparent films. These thin-film transparent conductors (TC) are essentially wide-bandgap degenerate semiconductors - invariably n-type - and hence are transparent to sub-bandgap (visible) radiation while affording high electrical conductivity due to the large free electron concentration. The principal performance characteristics of TC's are, of course, electrical conductivity and optical transmission. The TC's have a refractive index of around 2.0 and hence act as very efficient antireflection coatings. For using TC's in surface barrier solar cells, the photovoltaic barrier is of utmost importance and so the work function or electron affinity of the TC is also a very important material parameter. Fabrication processes are discussed.

  3. Positron annihilation in transparent ceramics

    NASA Astrophysics Data System (ADS)

    Husband, P.; Bartošová, I.; Slugeň, V.; Selim, F. A.

    2016-01-01

    Transparent ceramics are emerging as excellent candidates for many photonic applications including laser, scintillation and illumination. However achieving perfect transparency is essential in these applications and requires high technology processing and complete understanding for the ceramic microstructure and its effect on the optical properties. Positron annihilation spectroscopy (PAS) is the perfect tool to study porosity and defects. It has been applied to investigate many ceramic structures; and transparent ceramics field may be greatly advanced by applying PAS. In this work positron lifetime (PLT) measurements were carried out in parallel with optical studies on yttrium aluminum garnet transparent ceramics in order to gain an understanding for their structure at the atomic level and its effect on the transparency and light scattering. The study confirmed that PAS can provide useful information on their microstructure and guide the technology of manufacturing and advancing transparent ceramics.

  4. EDITORIAL: On display with transparent conducting films On display with transparent conducting films

    NASA Astrophysics Data System (ADS)

    Demming, Anna

    2012-03-01

    by a researcher in the early 1930s, 'It is obvious that if the dyes used for selective staining in ordinary microscopical work are supplemented by substances which cause a particular detail of the structure to fluoresce with a specific colour in ultraviolet light, then many strings will be added to the bow of the practical microscopist' [3]. More recently, emphasis on the role of plasmons—collective oscillations of electrons in nanoscale metal structures—has received considerable research attention. Plasmons enhance the local electromagnetic field and can lead to increased fluorescence rates from nearby fluorophores depending on the efficiency of the counteracting process, non-radiative transfer [4]. Flat ITO films have been used extensively in photovoltaic studies as transparent electrodes [5]. Over the past few years, nanowire structures have recently been used to increase the surface area of the interface between dye and oxide in dye-sensitized solar cells [6]. A collaboration of researchers in China and Australia has recently extended the innovation of the nanowire structure to the ITO electrode [7]. Using cyclic voltammetry the researchers confirmed that using a 3D ITO-nanowire electrode significantly enhanced the reaction current. Despite its attractive properties, alternatives to ITO are now in high demand. The rise in devices requiring flat electronic displays has begun to overwhelm the legitimacy of using such a rare element as indium for transparent conducting films. ITO is also brittle, causing problems for flexible displays. Films of carbon nanotubes have been proposed for transparent conducting films but improvements to the sheet resistance are needed before they can compete with the performance of ITO. The effects of HNO3 treatment on the resistivity of carbon nanotube films has attracted some debate in the community, and stimulated the work of Ji-Beom Yoo and colleagues in Korea [8]. Their results suggest that p-type doping has a larger effect on

  5. The Ethics of Information Use: A Guide for Teachers.

    ERIC Educational Resources Information Center

    School Libraries in Canada, 2001

    2001-01-01

    Presents a resource on the ethics of the use of information developed by the British Columbia Teacher-Librarians Association which supplements the Information and Communication Technology Integration Project for teachers of grades 6-9. Highlights include plagiarism; resources sheets; citing references; Internet privacy; Internet communication; and…

  6. Teen Living 7015. Work and Family Supplement.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational and Technical Education Services.

    This supplement to the Teen Living curriculum contains materials to help teachers integrate family skills and tech prep skills into consumer home economics programs. It is keyed to a 2-semester consumer home economics course, based on the North Carolina Program of Studies (revised 1992); it is designed to help students focus on the relationship…

  7. Project Physics Teacher Guide 4, Light and Electromagnetism.

    ERIC Educational Resources Information Center

    Harvard Univ., Cambridge, MA. Harvard Project Physics.

    Teaching procedures of Project Physics Unit 4 are presented to help teachers make effective use of learning materials. Unit contents are discussed in connection with teaching aid lists, multi-media schedules, schedule blocks, and resources charts. Brief summaries are made for transparencies, 16mm films, and reader articles. Included is information…

  8. Transparency through Structural Disorder: A New Concept for Innovative Transparent Ceramics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Al Saghir, Kholoud; Chenu, Sébastien; Veron, Emmanuel

    2015-01-27

    Transparent polycrystalline ceramics present signi fi cant eco- nomical and functional advantages over single crystal materials for optical, communication, and laser technologies. To date, transparency in these ceramics is ensured either by an optical isotropy (i.e., cubic symmetry) or a nanometric crystallite size, and the main challenge remains to eliminate porosity through complex high pressure - high temperature synthesis. Here we introduce a new concept to achieve ultimate transparency reaching the theoretical limit. We use a controlled degree of chemical disorder in the structure to obtain optical isotropy at the micrometer length scale. This approach can be applied in themore » case of anisotropic structures and micrometer scale crystal size ceramics. We thus report Sr 1+ x /2 Al 2+ x Si 2 - x O 8 (0 < x ≤ 0.4) readily scalable polycrystalline ceramics elaborated by full and congruent crystallization from glass. These materials reach 90% transmittance. This innovative method should drive the development of new highly transparent materials with technologically relevant applications.« less

  9. Career Orientation Curriculum Supplement for Grades 7-8.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Vocational Education.

    The supplement to the Career Orientation Curriculum Guide: 7-8 provides actual units of instruction which have been utilized in career orientation programs throughout the State of Ohio. In general, the units contain teacher and student objectives, student activities, teaching procedures, information on career opportunities in specific fields, and…

  10. Dietary docosahexaenoic acid supplementation in children with autism.

    PubMed

    Voigt, Robert G; Mellon, Michael W; Katusic, Slavica K; Weaver, Amy L; Matern, Dietrich; Mellon, Bryan; Jensen, Craig L; Barbaresi, William J

    2014-06-01

    The aim of the study was to determine whether docosahexaenoic acid (DHA) supplementation improves the behavior of children with autism. A group of 3- to 10-year-old children with autism were randomized in a double-blind fashion to receive a supplement containing 200 mg of DHA or a placebo for 6 months. The parents and the investigator completed the Clinical Global Impressions-Improvement scale to rate changes in core symptoms of autism after 3 and 6 months. The parents completed the Child Development Inventory and the Aberrant Behavior Checklist, and both parents and teachers completed the Behavior Assessment Scale for Children (BASC) at enrollment and after 6 months. A total of 48 children (40 [83%] boys, mean age [standard deviation] 6.1 [2.0] years) were enrolled; 24 received DHA and 24 placebo. Despite a median 431% increase in total plasma DHA levels after 6 months, the DHA group was not rated as improved in core symptoms of autism compared to the placebo group on the CGI-I. Based on the analysis of covariance models adjusted for the baseline rating scores, parents (but not teachers) provided a higher average rating of social skills on the BASC for the children in the placebo group compared to the DHA group (P = 0.04), and teachers (but not parents) provided a higher average rating of functional communication on the BASC for the children in the DHA group compared to the placebo group (P = 0.02). Dietary DHA supplementation of 200 mg/day for 6 months does not improve the core symptoms of autism. Our results may have been limited by inadequate sample size.

  11. High school athletes and nutritional supplements: a study of knowledge and use.

    PubMed

    Massad, S J; Shier, N W; Koceja, D M; Ellis, N T

    1995-09-01

    Factors influencing nutritional supplement use by high school students were assessed. Comparisons were made between various groups of sports participants and non-sports participants. The Nutritional Supplement Use and Knowledge Scale was administered to 509 students. Mean supplement use score was 10.87 (SEM = 0.50, range 0-57). Mean knowledge score was 13.56 (SEM = 0.16, range 1-21). Significant relationships (p < .01) were obtained for supplement knowledge with use, and supplement use with gender. ANOVA found significant differences between supplement use by gender (p < .01), supplement use by sports category (p < .05), and knowledge scores by sports category (p < .01). Discriminant function analysis indicated knowledge, supplement use, and subscores for protein, vitamins/minerals, knowledge, supplement use, and subscores for protein, vitamins/minerals, and carbohydrates were best discriminators of sport group membership. Greater knowledge about supplements was associated with less use; hence, education about supplements can be a deterrent to use. This study may help coaches, athletic trainers, athletic directors, teachers, physicians, and parents identify nutritional misconceptions held by adolescents.

  12. Tests in School--Seen through the Eyes of the Teachers.

    ERIC Educational Resources Information Center

    Mattsson, Hans

    1990-01-01

    The role played by written tests in Swedish schools was studied through a survey of 1,817 eighth-grade teachers (the senior level of compulsory school in Sweden) and 589 teachers of the second year of upper secondary school in three counties in Sweden (the response rate was 75%). The survey was supplemented with 51 interviews of teachers at four…

  13. TEDS-M 2008 User Guide for the International Database. Supplement 1: International Version of the TEDS-M Questionnaires

    ERIC Educational Resources Information Center

    Brese, Falk, Ed.

    2012-01-01

    The Teacher Education Study in Mathematics (TEDS-M) International Database includes data for all questionnaires administered as part of the TEDS-M study. These consisted of questionnaires administered to future teachers, educators, and institutions with teacher preparation programs. This supplement contains the international version of the TEDS-M…

  14. Phenomenal transparency in achromatic checkerboards.

    PubMed

    Masin, S C

    1999-04-01

    The study explored the luminance relations that determine the occurrence of achromatic transparency in phenomenal surfaces on complex backgrounds. Let the luminances of the left and right parts of a transparent surface on a bipartite background and those of the left and right parts of the bipartite background be p and q and m and n, respectively. Metelli proposed that this surface looks transparent when the rule p < q if m < n (or p > q if m > n) is satisfied, and Masin and Fukuda that it looks transparent when the inclusion rule is satisfied, that is, when p epsilon (m, q) or q epsilon (p, n). These rules also apply to achromatic checkerboards formed by one checkerboard enclosed in another checkerboard. This study shows that only the inclusion rule correctly predicted the occurrence of transparency in these checkerboards.

  15. Robot transparency, trust and utility

    NASA Astrophysics Data System (ADS)

    Wortham, Robert H.; Theodorou, Andreas

    2017-07-01

    As robot reasoning becomes more complex, debugging becomes increasingly hard based solely on observable behaviour, even for robot designers and technical specialists. Similarly, non-specialist users have difficulty creating useful mental models of robot reasoning from observations of robot behaviour. The EPSRC Principles of Robotics mandate that our artefacts should be transparent, but what does this mean in practice, and how does transparency affect both trust and utility? We investigate this relationship in the literature and find it to be complex, particularly in nonindustrial environments where, depending on the application and purpose of the robot, transparency may have a wider range of effects on trust and utility. We outline our programme of research to support our assertion that it is nevertheless possible to create transparent agents that are emotionally engaging despite having a transparent machine nature.

  16. The effects and interactions of student, teacher, and setting variables on reading outcomes for kindergartners receiving supplemental reading intervention.

    PubMed

    Hagan-Burke, Shanna; Coyne, Michael D; Kwok, Oi-Man; Simmons, Deborah C; Kim, Minjung; Simmons, Leslie E; Skidmore, Susan T; Hernandez, Caitlin L; McSparran Ruby, Maureen

    2013-01-01

    This exploratory study examined the influences of student, teacher, and setting characteristics on kindergarteners' early reading outcomes and investigated whether those relations were moderated by type of intervention. Participants included 206 kindergarteners identified as at risk for reading difficulties and randomly assigned to one of two supplemental interventions: (a) an experimental explicit, systematic, code-based program or (b) their schools' typical kindergarten reading intervention. Results from separate multilevel structural equation models indicated that among student variables, entry-level alphabet knowledge was positively associated with phonemic and decoding outcomes in both conditions. Entry-level rapid automatized naming also positively influenced decoding outcomes in both conditions. However, its effect on phonemic outcomes was statistically significant only among children in the typical practice comparison condition. Regarding teacher variables, the quality of instruction was associated with significantly higher decoding outcomes in the typical reading intervention condition but had no statistically significant influence on phonemic outcomes in either condition. Among setting variables, instruction in smaller group sizes was associated with better phonemic outcomes in the comparison condition but had no statistically significant influence on outcomes of children in the intervention group. Mode of delivery (i.e., pullout vs. in class) had no statistically significant influence on either outcome variable.

  17. Optically transparent semiconducting polymer nanonetwork for flexible and transparent electronics

    PubMed Central

    Yu, Kilho; Park, Byoungwook; Kim, Geunjin; Kim, Chang-Hyun; Park, Sungjun; Kim, Jehan; Jung, Suhyun; Jeong, Soyeong; Kwon, Sooncheol; Kang, Hongkyu; Kim, Junghwan; Yoon, Myung-Han; Lee, Kwanghee

    2016-01-01

    Simultaneously achieving high optical transparency and excellent charge mobility in semiconducting polymers has presented a challenge for the application of these materials in future “flexible” and “transparent” electronics (FTEs). Here, by blending only a small amount (∼15 wt %) of a diketopyrrolopyrrole-based semiconducting polymer (DPP2T) into an inert polystyrene (PS) matrix, we introduce a polymer blend system that demonstrates both high field-effect transistor (FET) mobility and excellent optical transparency that approaches 100%. We discover that in a PS matrix, DPP2T forms a web-like, continuously connected nanonetwork that spreads throughout the thin film and provides highly efficient 2D charge pathways through extended intrachain conjugation. The remarkable physical properties achieved using our approach enable us to develop prototype high-performance FTE devices, including colorless all-polymer FET arrays and fully transparent FET-integrated polymer light-emitting diodes. PMID:27911774

  18. Implementing the adapted physical education E-learning program into physical education teacher education program.

    PubMed

    Kwon, Eun Hye; Block, Martin E

    2017-10-01

    According to the Ministry of Education Korea (2014), the approximately 70.4% of all students with disabilities are included in general schools in Korea. However, studies show that Korean GPE teachers do not feel comforatble or prepared to include students with disabilities (Oh & Lee, 1999; Roh, 2002; Roh & Oh, 2005). The purpose of this study was to explore whether an APE e-learning supplement would have an impact on the level of self-efficacy and content knowledge of pre-service teachers related to including students with intellectual disabilities. An APE supplement was developed based on the Instructional Design Model (Dick, Carey, & Carey, 2005) to provide three sources of self-efficacy, mastery experience, vicarious experience, and social persuasions. Three groups of pre-service teachers (N=75) took the same content supplement with different delivery system, E-learning group (n=25) with online, traditional group (n=25) with printed handout, and control group (n=25) without supplement. Two instruments, the Physical Educators' Situation-Specific Self-efficacy and Inclusion Student with Disabilities in Physical Education (SE-PETE-D) and the content knowledge test, were given to all participants twice (i.e., pretest and posttest). A 3×2 mixed effect ANOVA revealed that pre-service teachers' perceived self-efficacy (p=0.023) improved after taking the e-learning supplement. However, there was no significant difference in the level of content knowledge (p=0.248) between the learning group and tranditional group. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. 78 FR 14149 - 2012 Fiscal Transparency Report

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-04

    ... DEPARTMENT OF STATE [Public Notice 8213] 2012 Fiscal Transparency Report AGENCY: Department of... Fiscal Transparency review process in its first annual Fiscal Transparency Report. This report describes... the standard. FY 2012 Fiscal Transparency Report The Department of State hereby presents the findings...

  20. Project Physics Teacher Guide 3, The Triumph of Mechanics.

    ERIC Educational Resources Information Center

    Harvard Univ., Cambridge, MA. Harvard Project Physics.

    Teaching procedures of Project Physics Unit 3 are presented to help teachers make effective use of learning materials. Unit contents are discussed in connection with teaching aid perspective, multi-media schedules, schedule blocks, and resource charts. Brief analyses are made for transparencies, 16mm films, and reader articles. Included is…

  1. Project Physics Teacher Guide 5, Models of the Atom.

    ERIC Educational Resources Information Center

    Harvard Univ., Cambridge, MA. Harvard Project Physics.

    Teaching procedures of Project Physics Unit 5 are presented to help teachers make effective use of learning materials. Unit contents are discussed in connection with teaching aid lists, multi-media schedules, schedule blocks, and resource charts. Brief summaries are made for transparencies, 16mm films, and reader articles. Included is information…

  2. Project Physics Teacher Guide 2, Motion in the Heavens.

    ERIC Educational Resources Information Center

    Harvard Univ., Cambridge, MA. Harvard Project Physics.

    Teaching procedures of Project Physics Unit 2 are presented to help teachers make effective use of learning materials. The unit contents are discussed in connection with teaching aid perspectives, multi-media schedules, schedule blocks, and resource charts. Analyses are made for transparencies, 16mm films, and reader articles. Included is…

  3. Transparent Armor Cost Benefit Study

    DTIC Science & Technology

    2008-04-01

    2005 2006 UNCLASSIFIED UNCLASSIFIED 4/30/2008 4/17 2006 “Iraqi Pope Glass” 2004-2005 - GPK Recent HistoryEarly OIF Curb Wt: 10,300lbs GVW: 12,100lbs...UNCLASSIFIED UNCLASSIFIED 4/30/2008 5/17 Future Transparent Gun Shields Requirement: Upgrade GPKS with transparent armor for enhanced situational...awareness while maintaining soldier cover within armor envelope. AHI GS & GPK Upgraded Gunner Shield – Transparent Armored Gun Shield (TAGS

  4. Transparent Armor Cost Benefit Study

    DTIC Science & Technology

    2006-10-30

    added this cocoon to approximately 100 HMMWVs in Ramadi. 2006 “Iraqi Pope Glass” 2004-2005 - GPK Recent HistoryEarly OIF Curb Wt: 10,300lbs GVW...12,100lbs UNCLASSIFIED UNCLASSIFIED 10/30/2006 5/14 Future Transparent Gun Shields Requirement: Upgrade GPKS with transparent armor for enhanced...situational awareness while maintaining soldier cover within armor envelope. AHI GS & GPK Upgraded Gunner Shield – Transparent Armored Gun Shield (TAGS

  5. Banking/Finance Supplement to the California Business Program Guide.

    ERIC Educational Resources Information Center

    Cary, Judie; And Others

    This supplement to the California Business Education Program Guide for Office and Distributive Occupations is designed to assist office education teachers of secondary, postsecondary, and adult students to update their business education curricula in light of new technology and increasing demand for skilled office workers. Focusing on banking and…

  6. Long-chain n-3 PUFA supplementation decreases physical activity during class time in iron-deficient South African school children.

    PubMed

    Smuts, Cornelius M; Greeff, Jani; Kvalsvig, Jane; Zimmermann, Michael B; Baumgartner, Jeannine

    2015-01-28

    Both Fe deficiency and poor n-3 fatty acid status have been associated with behavioural changes in children. In the present study, we investigated the effects of Fe and DHA+EPA supplementation, alone or in combination, on physical activity during school days and on teacher-rated behaviour in healthy Fe-deficient school children. In a 2 × 2 factorial design, children (n 98, 6-11 years) were randomly assigned to receive (1) Fe (50 mg) plus DHA (420 mg)+EPA (80 mg), (2) Fe plus placebo, (3) placebo plus DHA+EPA or (4) placebo plus placebo as oral supplements (4 d/week) for 8.5 months. Physical activity was measured during four school days at baseline and endpoint using accelerometers, and data were stratified into morning class time (08.00-10.29 hours), break time (10.30-11.00 hours) and after-break class time (11.01-12.00 hours) for analysis. Classroom behaviour was assessed at endpoint using Conners' Teacher Rating Scales. DHA+EPA supplementation decreased physical activity counts during morning class time, increased sedentary physical activity, and decreased light- and moderate-intensity physical activities. Consistently, DHA+EPA supplementation increased sedentary physical activity and decreased light-intensity physical activity during after-break class time. Even though there were no treatment effects found on teacher-rated behaviour, lower physical activity during morning class time was associated with lower levels of teacher-rated hyperactivity and oppositional behaviour at endpoint. Despite a positive association between Fe status and physical activity during break time at baseline, Fe supplementation did not affect physical activity during break time and class time. Our findings suggest that DHA+EPA supplementation may decrease physical activity levels during class time, and further indicate that accelerometry might be a useful tool to assess classroom behaviour in healthy children.

  7. Transparent Armor Cost Benefit Study

    DTIC Science & Technology

    2007-03-06

    Armored HMMWVs (M1114s) 2003 2005 2006 UNCLASSIFIED UNCLASSIFIED 3/6/2007 4/17 2006 “Iraqi Pope Glass” 2004-2005 - GPK Recent HistoryEarly OIF Curb Wt...10,300lbs GVW: 12,100lbs UNCLASSIFIED UNCLASSIFIED 3/6/2007 5/17 Future Transparent Gun Shields Requirement: Upgrade GPKS with transparent armor for...enhanced situational awareness while maintaining soldier cover within armor envelope. AHI GS & GPK Upgraded Gunner Shield – Transparent Armored Gun

  8. Lutetium oxide-based transparent ceramic scintillators

    DOEpatents

    Seeley, Zachary; Cherepy, Nerine; Kuntz, Joshua; Payne, Stephen A.

    2016-01-19

    In one embodiment, a transparent ceramic of sintered nanoparticles includes gadolinium lutetium oxide doped with europium having a chemical composition (Lu.sub.1-xGd.sub.x).sub.2-YEu.sub.YO.sub.3, where X is any value within a range from about 0.05 to about 0.45 and Y is any value within a range from about 0.01 to about 0.2, and where the transparent ceramic exhibits a transparency characterized by a scatter coefficient of less than about 10%/cm. In another embodiment, a transparent ceramic scintillator of sintered nanoparticles, includes a body of sintered nanoparticles including gadolinium lutetium oxide doped with a rare earth activator (RE) having a chemical composition (Lu.sub.1-xGd.sub.x).sub.2-YRE.sub.YO.sub.3, where RE is selected from the group consisting of: Sm, Eu, Tb, and Dy, where the transparent ceramic exhibits a transparency characterized by a scatter coefficient of less than about 10%/cm.

  9. Introduction to Fashion Buying. Teacher Edition. Fashion Buying Series.

    ERIC Educational Resources Information Center

    Collins, Cindy

    This teacher's guide presents material for a unit on introduction to fashion buying. Content focuses on information sources, retail store types, the responsibilities of a buyer, and the qualifications of a buyer. The guide contains 4 objectives, 4 group learning activities keyed to the objectives, 17 transparency masters with dialogue for each,…

  10. Flexible Transparent Electronic Gas Sensors.

    PubMed

    Wang, Ting; Guo, Yunlong; Wan, Pengbo; Zhang, Han; Chen, Xiaodong; Sun, Xiaoming

    2016-07-01

    Flexible and transparent electronic gas sensors capable of real-time, sensitive, and selective analysis at room-temperature, have gained immense popularity in recent years for their potential to be integrated into various smart wearable electronics and display devices. Here, recent advances in flexible transparent sensors constructed from semiconducting oxides, carbon materials, conducting polymers, and their nanocomposites are presented. The sensing material selection, sensor device construction, and sensing mechanism of flexible transparent sensors are discussed in detail. The critical challenges and future development associated with flexible and transparent electronic gas sensors are presented. Smart wearable gas sensors are believed to have great potential in environmental monitoring and noninvasive health monitoring based on disease biomarkers in exhaled gas. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Lines that induce phenomenal transparency.

    PubMed

    Grieco, Alba; Roncato, Sergio

    2005-01-01

    Three neighbouring opaque surfaces may appear split into two layers, one transparent and one opaque beneath, if an outline contour is drawn that encompasses two of them. The phenomenon was originally observed by Kanizsa [1955 Rivista di Psicologia 69 3-19; 1979 Organization in Vision: Essays on Gestalt Psychology (New York: Praeger)], for the case where an outline contour is drawn to encompass one of the two parts of a bicoloured figure and a portion of a background of lightest (or darkest) luminance. Preliminary observations revealed that the outline contour yields different effects: in addition to the stratification into layers described by Kanizsa, a second split, opposite in depth order, may occur when the outline contour is close in luminance to one of the three surfaces. An initial experiment was designed to investigate what conditions give rise to the two phenomenal transparencies: this led to the conclusion that an outline contour superimposed on an opaque surface causes this surface to emerge as a transparent layer when the luminances of the contour and the surface differ, in absolute value, by no more than 13.2 cd m(-2). We have named this phenomenon 'transparency of the intercepted surface', to distinguish it from the phenomenal transparency arising when the contour and surface are very different in luminance. When such a difference exists, the contour acts as a factor of surface definition and grouping: the portion of the homogeneous surface it bounds emerges as a fourth surface and groups with a nearby surface if there is one close in luminance. The transparency phenomena ('transparency of the contoured surface') perceived in this context conform to the constraints of Metelli's model, as demonstrated by a second experiment, designed to gather 'opacity' ratings of stimuli. The observer judgments conformed to the values predicted by Metelli's formula for perceived degree of transparency, alpha. The role of the outline contour in conveying figural and

  12. What Are Secondary Students' Expectations for Teachers in Virtual School Environments?

    ERIC Educational Resources Information Center

    Oliver, Kevin; Osborne, Jason; Brady, Kevin

    2009-01-01

    A recent evaluation of the new North Carolina Virtual Public School (NCVPS) in the USA revealed numerous expectations for virtual school teachers from secondary students. Specifically, students expected their teachers to actually teach rather than moderate a course shell, supplement course shells with content and projects that illustrate…

  13. How Portuguese and American teachers plan for literacy instruction.

    PubMed

    Spear-Swerling, Louise; Lopes, Joao; Oliveira, Celia; Zibulsky, Jamie

    2016-04-01

    This study explored American and Portuguese elementary teachers' preferences in planning for literacy instruction using the Language Arts Activity Grid (LAAG; Cunningham, Zibulsky, Stanovich, & Stanovich, 2009), on which teachers described their preferred instructional activities for a hypothetical 2-h language arts block. Portuguese teachers (N = 186) completed Portuguese versions of a background questionnaire and LAAG electronically, in Survey Monkey; American teachers (N = 102) completed identical English measures using paper and pencil. Results showed that teachers in both groups usually addressed comprehension and reading fluency on their LAAGs and that they also allocated the most time to these two areas. However, American teachers were more likely to include teacher-directed fluency activities, whereas Portuguese teachers were more likely to include fluency activities that were not teacher directed. Significantly more American than Portuguese teachers addressed phonics in their planning, whereas significantly more Portuguese than American teachers addressed writing processes such as revision. Both groups of educators demonstrated large variability in planning, with many teachers omitting important components of literacy identified by researchers, for writing as well as reading. The study highlights the importance of providing teachers with comprehensive, research-based core literacy curricula as well as professional development on key components of literacy. Study findings also suggest significant relationships between orthographic transparency and teachers' instructional planning.

  14. Transmission in Optically Transparent Core Networks

    NASA Astrophysics Data System (ADS)

    Kilper, Dan; Jensen, Rich; Petermann, Klaus; Karasek, Miroslav

    2007-03-01

    Call for Papers: Transmission in Optically Transparent Core Networks

    Guest Feature Editors

    Dan Kilper and Rich Jensen, Coordinating Associate Editors Klaus Petermann and Miroslav Karasek, Guest Feature Editors

    Submission deadline: 15 June 2007
    Optically transparent networks in which optical transport signals are routed uninterrupted through multiple nodes have long been viewed as an important evolutionary step in fiber optic communications. More than a decade of research and development on transparent network technologies together with the requisite traffic growth has culminated in the recent deployment of commercial optically transparent systems. Although many of the traditional research goals of optical transmission remain important, optical transparency introduces new challenges. Greater emphasis is placed on system efficiency and control. The goal of minimizing signal terminations, which has been pursued through increasing reach and channel capacity, also can be realized through wavelength routing techniques. Rather than bounding system operation by rigid engineering rules, the physical layer is controlled and managed by automation tools. Many static signal impairments become dynamic due to network reconfiguration and transient fault events. Recently new directions in transmission research have emerged to address transparent networking problems. This special issue of the Journal of Optical Networking will examine the technologies and theory underpinning transmission in optically transparent core networks, including both metropolitan and long haul systems.

    Scope of Submission

    The special issue editors are soliciting high-quality original research papers related to transmission in optically transparent core networks. Although this does not include edge networks such as access or enterprise networks, core networks that have access capabilities will be considered in scope as will topics

  15. Legal Secretarial Supplement to the California Business Education Program Guide.

    ERIC Educational Resources Information Center

    Holst, Alice L.; And Others

    This supplement to the California Business Education Program Guide for Office and Distributive Occupations is designed to assist office education teachers of secondary, postsecondary, and adult students to update their business education curricula in light of new technology and increasing demand for skilled office workers. Focusing on the legal…

  16. 3D-Printed Transparent Glass

    DOE PAGES

    Nguyen, Du T.; Meyers, Cameron; Yee, Timothy D.; ...

    2017-04-28

    In this study, silica inks are developed, which may be 3D printed and thermally processed to produce optically transparent glass structures with sub-millimeter features in forms ranging from scaffolds to monoliths. The inks are composed of silica powder suspended in a liquid and are printed using direct ink writing. The printed structures are then dried and sintered at temperatures well below the silica melting point to form amorphous, solid, transparent glass structures. This technique enables the mold-free formation of transparent glass structures previously inaccessible using conventional glass fabrication processes.

  17. 3D-Printed Transparent Glass

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nguyen, Du T.; Meyers, Cameron; Yee, Timothy D.

    In this study, silica inks are developed, which may be 3D printed and thermally processed to produce optically transparent glass structures with sub-millimeter features in forms ranging from scaffolds to monoliths. The inks are composed of silica powder suspended in a liquid and are printed using direct ink writing. The printed structures are then dried and sintered at temperatures well below the silica melting point to form amorphous, solid, transparent glass structures. This technique enables the mold-free formation of transparent glass structures previously inaccessible using conventional glass fabrication processes.

  18. Transparent Alloys Operation

    NASA Image and Video Library

    2018-03-26

    iss055e005543 (March 26, 2018) --- Expedition 55 Flight Engineer and astronaut Scott Tingle is pictured conducting the Transparent Alloys experiment inside the Destiny lab module's Microgravity Science Glovebox. The Transparent Alloys study is a set of five experiments that seeks to improve the understanding of melting-solidification processes in plastics without the interference of Earth's gravity environment. Results may impact the development of new light-weight, high-performance structural materials for space applications. Observations may also impact fuel efficiency, consumption and recycling of materials on Earth potentially reducing costs and increasing industrial competitiveness.

  19. Transparency

    ERIC Educational Resources Information Center

    LaFee, Scott

    2009-01-01

    Citizens now expect access to information, particularly from public institutions like local school districts. They demand input and accountability. Cultural and technological changes, such as the Internet, make it possible for districts to comply. Yet transparency--the easily seen and understood actions of a school district and the thinking behind…

  20. Transparent conductive graphene textile fibers

    PubMed Central

    Neves, A. I. S.; Bointon, T. H.; Melo, L. V.; Russo, S.; de Schrijver, I.; Craciun, M. F.; Alves, H.

    2015-01-01

    Transparent and flexible electrodes are widely used on a variety of substrates such as plastics and glass. Yet, to date, transparent electrodes on a textile substrate have not been explored. The exceptional electrical, mechanical and optical properties of monolayer graphene make it highly attractive as a transparent electrode for applications in wearable electronics. Here, we report the transfer of monolayer graphene, grown by chemical vapor deposition on copper foil, to fibers commonly used by the textile industry. The graphene-coated fibers have a sheet resistance as low as ~1 kΩ per square, an equivalent value to the one obtained by the same transfer process onto a Si substrate, with a reduction of only 2.3 per cent in optical transparency while keeping high stability under mechanical stress. With this approach, we successfully achieved the first example of a textile electrode, flexible and truly embedded in a yarn. PMID:25952133

  1. Aftershocks: The Role of State Labor Policies in Shaping Teacher Sensemaking, Satisfaction and Exit Decisions in North Carolina

    ERIC Educational Resources Information Center

    Feldman, Rachel Carly

    2017-01-01

    This dissertation examines how teachers respond to state-wide labor reforms. In 2013 and 2014, the state of North Carolina drastically altered compensation for teachers. Policymakers affected labor by attempting to revoke tenure for all teachers (and succeeded in eliminating it for new teachers), discontinuing supplemental pay for advanced…

  2. ACER Chemistry Test Item Collection (ACER CHEMTIC Year 12 Supplement).

    ERIC Educational Resources Information Center

    Australian Council for Educational Research, Hawthorn.

    This publication contains 317 multiple-choice chemistry test items related to topics covered in the Victorian (Australia) Year 12 chemistry course. It allows teachers access to a range of items suitable for diagnostic and achievement purposes, supplementing the ACER Chemistry Test Item Collection--Year 12 (CHEMTIC). The topics covered are: organic…

  3. Individual Development Plans as Governance Tools--Changed Governance of Teachers' Work

    ERIC Educational Resources Information Center

    Parding, Karolina; Liljegren, Andreas

    2017-01-01

    Auditing, accountability, and transparency are concepts that greatly impact the working conditions of today's public sector professionals, including teachers. Documentation requirements have been on the increase for some time, which can be seen in the education sector's Individual Development Plans (IDPs), for example. These IDPs are pedagogical…

  4. Highly Conductive Transparent and Flexible Electrodes Including Double-Stacked Thin Metal Films for Transparent Flexible Electronics.

    PubMed

    Han, Jun Hee; Kim, Do-Hong; Jeong, Eun Gyo; Lee, Tae-Woo; Lee, Myung Keun; Park, Jeong Woo; Lee, Hoseung; Choi, Kyung Cheol

    2017-05-17

    To keep pace with the era of transparent and deformable electronics, electrode functions should be improved. In this paper, an innovative structure is suggested to overcome the trade-off between optical and electrical properties that commonly arises with transparent electrodes. The structure of double-stacked metal films showed high conductivity (<3 Ω/sq) and high transparency (∼90%) simultaneously. A proper space between two metal films led to high transmittance by an optical phenomenon. The principle of parallel connection allowed the electrode to have high conductivity. In situ fabrication was possible because the only materials composing the electrode were silver and WO 3 , which can be deposited by thermal evaporation. The electrode was flexible enough to withstand 10 000 bending cycles with a 1 mm bending radius. Furthermore, a few μm scale patterning of the electrode was easily implemented by using photolithography, which is widely employed industrially for patterning. Flexible organic light-emitting diodes and a transparent flexible thin-film transistor were successfully fabricated with the proposed electrode. Various practical applications of this electrode to new transparent flexible electronics are expected.

  5. Troubleshooting. Teacher's Guide and Student Activity Sheets. Small Engine Repair Series.

    ERIC Educational Resources Information Center

    Hill, Pamela

    This teacher's guide is part of an instructional series on small engine repair that is intended for use with mentally retarded and learning disabled students in general mechanical repair programs. Notes to the instructor cover equipment needed, preparation before teaching, and use of evaluation charts, transparency masters, audiovisual(s), and…

  6. Student Perceptions of Teaching Transparency

    ERIC Educational Resources Information Center

    Anderson, Alecia D.; Hunt, Andrea N.; Powell, Rachel E.; Dollar, Cindy Brooks

    2013-01-01

    The authors discuss the relationship between teaching transparency and active learning through the perspectives of their students. Active learning directly engages students in the learning process while transparency involves the instructor's divulgence of logic regarding course organization and activity choices. After utilizing these teaching…

  7. Flexible Transparent Supercapacitors Based on Hierarchical Nanocomposite Films.

    PubMed

    Chen, Fanhong; Wan, Pengbo; Xu, Haijun; Sun, Xiaoming

    2017-05-31

    Flexible transparent electronic devices have recently gained immense popularity in smart wearable electronics and touch screen devices, which accelerates the development of the portable power sources with reliable flexibility, robust transparency and integration to couple these electronic devices. For potentially coupled as energy storage modules in various flexible, transparent and portable electronics, the flexible transparent supercapacitors are developed and assembled from hierarchical nanocomposite films of reduced graphene oxide (rGO) and aligned polyaniline (PANI) nanoarrays upon their synergistic advantages. The nanocomposite films are fabricated from in situ PANI nanoarrays preparation in a blended solution of aniline monomers and rGO onto the flexible, transparent, and stably conducting film (FTCF) substrate, which is obtained by coating silver nanowires (Ag NWs) layer with Meyer rod and then coating of rGO layer on polyethylene terephthalate (PET) substrate. Optimization of the transparency, the specific capacitance, and the flexibility resulted in the obtained all-solid state nanocomposite supercapacitors exhibiting enhanced capacitance performance, good cycling stability, excellent flexibility, and superior transparency. It provides promising application prospects for exploiting flexible, low-cost, transparent, and high-performance energy storage devices to be coupled into various flexible, transparent, and wearable electronic devices.

  8. Merit Pay and Job Enlargement as Reforms: Incentives, Implementation, and Teacher Response.

    ERIC Educational Resources Information Center

    Firestone, William A.

    1991-01-01

    Based on intensive case studies of two school districts, this study compared two teacher work reforms: merit pay and job enlargement. Interviews with 64 teachers and 53 administrators, supplemented by over 1,300 survey responses, indicate the efficacy of each approach and the potential advantages of job enlargement. (SLD)

  9. Transparent metals for ultrabroadband electromagnetic waves.

    PubMed

    Fan, Ren-Hao; Peng, Ru-Wen; Huang, Xian-Rong; Li, Jia; Liu, Yongmin; Hu, Qing; Wang, Mu; Zhang, Xiang

    2012-04-17

    Making metals transparent, which could lead to fascinating applications, has long been pursued. Here we demonstrate that with narrow slit arrays metallic plates become transparent for extremely broad bandwidths; the high transmission efficiency is insensitive to the metal thickness. This work provides a guideline to develop novel devices, including transparent conducting panels, broadband metamaterials, and antireflective solar cells. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Teachers Touch the Sky: A Workshop in Astronomy for Teachers in Grades 3-9

    NASA Astrophysics Data System (ADS)

    Buratti, Bonnie J.; Banholzer, S.; Dalba, P. A.; Edberg, S.

    2012-10-01

    Nine times during the past two decades, JPL technical staff assisted by master teachers conducted a one-week workshop for teachers in grades 3-9. The teachers are walked through hands-on activities that are all based on current projects in astronomy and space science at JPL. The activities are inquiry-based and emphasize the scientific method and fundamental math and science skills. Each year the workshop focuses on a NASA theme: in 2012 it was the Dawn Mission to the asteroid 4 Vesta. Several activities are based on the Lawrence Livermore Lab’s Great Exploration in Math and Science (GEMS) guides. Teachers tour JPL’s facilities such as the Space Flight Operations Center, the Spacecraft Assembly Facility, and the Mars Yard. The integration of the lessons into the teachers’ own curricula is discussed, and a field trip to JPL’s Table Mountain Observatory is included. Teachers learn of the resources NASA makes available to them, and they have the opportunity to talk to “real” scientists about their work. Teachers receive a stipend for participation plus classroom materials. Work funded by NASA through an E&PO supplement to the Dawn Participating Scientist Program.

  11. Clinical trials transparency and the Trial and Experimental Studies Transparency (TEST) act.

    PubMed

    Logvinov, Ilana

    2014-03-01

    Clinical trial research is the cornerstone for successful advancement of medicine that provides hope for millions of people in the future. Full transparency in clinical trials may allow independent investigators to evaluate study designs, perform additional analysis of data, and potentially eliminate duplicate studies. Current regulatory system and publishers rely on investigators and pharmaceutical industries for complete and accurate reporting of results from completed clinical trials. Legislation seems to be the only way to enforce mandatory disclosure of results. The Trial and Experimental Studies Transparency (TEST) Act of 2012 was introduced to the legislators in the United States to promote greater transparency in research industry. Public safety and advancement of science are the driving forces for the proposed policy change. The TEST Act may benefit the society and researchers; however, there are major concerns with participants' privacy and intellectual property protection. Copyright © 2014 Elsevier Inc. All rights reserved.

  12. Promoting transparency, accountability, and access through a multi-stakeholder initiative: lessons from the medicines transparency alliance.

    PubMed

    Vian, Taryn; Kohler, Jillian C; Forte, Gilles; Dimancesco, Deirdre

    2017-01-01

    Barriers to expanding access to medicines include weak pharmaceutical sector governance, lack of transparency and accountability, inadequate attention to social services on the political agenda, and financing challenges. Multi-stakeholder initiatives such as the Medicines Transparency Alliance (MeTA) may help overcome these barriers. Between 2008 and 2015, MeTA engaged stakeholders in the pharmaceutical sectors of seven countries (Ghana, Jordan, Kyrgyzstan, Peru, Philippines, Uganda, and Zambia) to promote access goals through greater transparency. We reviewed archival data to document MeTA activities and results related to transparency and accountability in the seven countries where it was implemented. We identified common themes and content areas, noting specific activities used to make information transparent and accessible, how data were used to inform discussions, and the purpose and timing of meetings and advocacy activities to help set priorities and influence governance decisions. The cross-case analysis looked for pathways which might link the MeTA strategies to results such as better policies or program improvements. Countries used evidence gathering, open meetings, and proactive information dissemination to increase transparency. MeTA fostered policy dialogue to bring together the many government, civil society and private company stakeholders concerned with access issues, and provided them with information to understand barriers to access at policy, organizational, and community levels. We found strong evidence that transparency was enhanced. Some evidence suggests that MeTA efforts contributed to new policies and civil society capacity strengthening although the impact on government accountability is not clear. MeTA appears to have achieved its goal of creating a multi-stakeholder shared policy space in which government, civil society, and private sector players can come together and have a voice in the national pharmaceutical policy making process

  13. Transparency and Oversight in Local Wellness Policies

    ERIC Educational Resources Information Center

    Chriqui, Jamie F.; Chaloupka, Frank J.

    2011-01-01

    Background: Advocates have called for increased wellness policy transparency and oversight through the use of health advisory councils. This study examines (1) wellness policy transparency, (2) advisory council requirements, (3) factors associated with each, and (4) whether transparency or advisory council requirements are indicative of a stronger…

  14. Transparent electrode for optical switch

    DOEpatents

    Goldhar, Julius; Henesian, Mark A.

    1986-01-01

    A low pressure gas electrode utilizing ionized gas in a glow discharge regime forms a transparent electrode for electro-optical switches. The transparent electrode comprises a low pressure gas region on both sides of the crystal. When the gas is ionized, e.g., by a glow discharge in the low pressure gas, the plasma formed is a good conductor. The gas electrode acts as a highly uniform conducting electrode. Since the plasma is transparent to a high energy laser beam passing through the crystal, the electrode is a transparent electrode. A crystal exposed from two sides to such a plasma can be charged up uniformly to any desired voltage. The plasma can be created either by the main high voltage pulser used to charge up the crystal or by auxiliary discharges or external sources of ionization. A typical configuration utilizes 10 torr argon in the discharge region adjacent to each crystal face.

  15. Transparency--"Deal or no deal"?

    PubMed

    Lutz, Sandy

    2007-01-01

    In the United States, transparency is becoming an ideal worthy of Mom and apple pie, like quality in healthcare. Physicians, payers, hospitals, business associations, and organizations representing patients have all chimed in expressing support. At the local, state, and national levels a variety of transparency initiatives are under way. How will transparency affect the healthcare industry? Transparency could profoundly change today's balance of power, for it is about information, and information is power. As employers push more cost sharing to workers, hospitals and health systems will have to construct a pricing structure that is meaningful to consumers. What are providers to do? To be successful with this new demand, providers should make sure they are making quality information as well as pricing information available to consumers. They will have to know the market, know what their own prices mean, consider the customer, and reengineer business processes around the patient rather than around the billing side of business.

  16. Exploratory Development of Transparent Conductor Materials

    DTIC Science & Technology

    1975-03-01

    silicon c,:ll) or b&%ckwa.U (CdS cells ) electrodes. ’Nn oxide and indium oxide are currently the best known transparent condudwtor materials and they are...From an investigation of its fundamental physical properties it was concluded that cadmium stannate is a viable candidate for transparent solar cell ...transparent backwall electrodes in CdS solar cells . A further objective has been the utilization of the high infrared reflectivity of cadmium

  17. In-vitro corneal transparency measuring system

    NASA Astrophysics Data System (ADS)

    Ventura, Liliane; da Costa Vieira, Marcelo A.; Isaac, Flavio; Chiaradia, Caio; Faria de Sousa, Sidney J.

    2001-06-01

    A system for measuring the average corneal transparency of preserved corneas has been developed in order to provide a more accurate and standard report of the corneal tissue. The donated cornea transparency is one of the features to be analyzed previously to its indication for the transplant. The small portable system consists of two main parts: the optical and the electronic parts. The optical system consists of a white light, lenses and pin-holes that collimate white light beams that illuminates the cornea in its preservative medium. The light that passes through the cornea is detected by a resistive detector and the average corneal transparency is shown in a display. In order to obtain just the tissue transparency, the electronic circuit was built in a way that there is a baseline input of the preservative medium, previous to the measurement of the corneal transparency. Manipulating the system consists of three steps: (1) Adjusting the zero percentage in the absence of light (at this time the detectors in the dark); (2) Placing the preservative medium in the system and adjusting the 100% value (this is the baseline input); (3) Preserving the cornea and placing it in the system. The system provides the tissue transparency. The system is connected to an endothelium evaluation system for Slit Lamp, that we have developed, and statistics about the relationship of the corneal transparency and density of the endothelial cells will be provided in the next years. The system is being used in a public Eye Bank in Brasil.

  18. Teachers See What Ability Scores Cannot: Predicting Student Performance with Challenging Mathematics

    ERIC Educational Resources Information Center

    Foreman, Jennifer L.; Gubbins, E. Jean

    2015-01-01

    Teacher nominations of students are commonly used in gifted and talented identification systems to supplement psychometric measures of reasoning ability. In this study, second grade teachers were requested to nominate approximately one fourth of their students as having high learning potential in the year prior to the students' participation in a…

  19. p-Type Transparent Electronics

    DTIC Science & Technology

    2003-09-25

    thin - film transistors (TTFTs) reported to date in the literature are summarized. 2.2.1 Thin - Film Transistor Structure and Fabrication A TFT ...is incapable of controlling the TFT regardless of gate voltage, as described in Sec. 2.2.3.1. 2.2.4 Transparent Thin - Film Transistors (TTFTs...Transparent thin - film transistors (TTFTs) described in the literature to date are all n-channel devices. Several n-channel TTFTs (n-TTFTs) based on

  20. Broadband telecom transparency of semiconductor-coated metal nanowires: more transparent than glass.

    PubMed

    Paniagua-Domínguez, R; Abujetas, D R; Froufe-Pérez, L S; Sáenz, J J; Sánchez-Gil, J A

    2013-09-23

    Metallic nanowires (NW) coated with a high permittivity dielectric are proposed as means to strongly reduce the light scattering of the conducting NW, rendering them transparent at infrared wavelengths of interest in telecommunications. Based on a simple, universal law derived from electrostatics arguments, we find appropriate parameters to reduce the scattering efficiency of hybrid metal-dielectric NW by up to three orders of magnitude as compared with the scattering efficiency of the homogeneous metallic NW. We show that metal@dielectric structures are much more robust against fabrication imperfections than analogous dielectric@metal ones. The bandwidth of the transparent region entirely covers the near IR telecommunications range. Although this effect is optimum at normal incidence and for a given polarization, rigorous theoretical and numerical calculations reveal that transparency is robust against changes in polarization and angle of incidence, and also holds for relatively dense periodic or random arrangements. A wealth of applications based on metal-NWs may benefit from such invisibility.

  1. Nanocellulose reinforcement of Transparent Composites

    Treesearch

    Joshua Steele; Hong Dong; James F. Snyder; Josh A. Orlicki; Richard S. Reiner; Alan W. Rudie

    2012-01-01

    In this work, we evaluate the impact of nanocellulose reinforcement on transparent composite properties. Due to the small diameter, high modulus, and high strength of cellulose nanocrystals, transparent composites that utilize these materials should show improvement in bulk mechanical performances without a corresponding reduction in optical properties. In this study...

  2. Teacher's Guide to the Internet

    ERIC Educational Resources Information Center

    Blaylock, Jenny L.

    2005-01-01

    This paper is designed for teachers of students in grades Pre-K through 12 and will introduce them to the numerous curriculum resources on the Internet. More often today supplements to course curriculum can be found on any text book company web site. Even more important is the amount of curriculum resources available for free on the Internet.…

  3. Transparent ambipolar organic thin film transistors based on multilayer transparent source-drain electrodes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, Nan; Hu, Yongsheng, E-mail: huyongsheng@ciomp.ac.cn, E-mail: liuxy@ciomp.ac.cn; Lin, Jie

    A fabrication method for transparent ambipolar organic thin film transistors with transparent Sb{sub 2}O{sub 3}/Ag/Sb{sub 2}O{sub 3} (SAS) source and drain electrodes has been developed. A pentacene/N,N′-ditridecylperylene-3,4,9,10-tetracarboxylic di-imide (PTCDI-C13) bilayer heterojunction is used as the active semiconductor. The electrodes are deposited by room temperature electron beam evaporation. The devices are fabricated without damaging the active layers. The SAS electrodes have high transmittance (82.5%) and low sheet resistance (8 Ω/sq). High performance devices with hole and electron mobilities of 0.3 cm{sup 2}/V s and 0.027 cm{sup 2}/V s, respectively, and average visible range transmittance of 72% were obtained. These transistors have potential for transparent logicmore » integrated circuit applications.« less

  4. Variation in Teacher Salaries in Georgia: Does the Property Tax Base Matter?

    ERIC Educational Resources Information Center

    Winters, John V.

    2009-01-01

    There is a great deal of variation in teacher salaries across school districts. This is important because districts that pay low salaries are likely to have greater trouble recruiting and retaining quality teachers. Regression analysis reveals that local supplements--payments exceeding the state minimum salary schedule--are affected by a number of…

  5. Nanostructured p-type semiconducting transparent oxides: promising materials for nano-active devices and the emerging field of "transparent nanoelectronics".

    PubMed

    Banerjee, Arghya; Chattopadhyay, Kalyan K

    2008-01-01

    Transparent conducting oxides (TCO) with p-type semiconductivity have recently gained renewed interest for the fabrication of all-oxide transparent junctions, having potential applications in the emerging field of 'Transparent' or 'Invisible Electronics'. This kind of transparent junctions can be used as a "functional" window, which will transmit visible portion of solar radiation, but generates electricity by the absorption of the UV part. Therefore, these devices can be used as UV shield as well as UV cells. In this report, a brief review on the research activities on various p-TCO materials is furnished along-with the fabrication of different transparent p-n homojunction, heterojunction and field-effect transistors. Also the reason behind the difficulties in obtaining p-TCO materials and possible solutions are discussed in details. Considerable attention is given in describing the various patent generations on the field of p-TCO materials as well as transparent p-n junction diodes and light emitting devices. Also, most importantly, a detailed review and patenting activities on the nanocrystalline p-TCO materials and transparent nano-active device fabrication are furnished with considerable attention. And finally, a systematic description on the fabrication and characterization of nanocrystalline, p-type transparent conducting CuAlO(2) thin film, deposited by cost-effective low-temperature DC sputtering technique, by our group, is furnished in details. These p-TCO micro/nano-materials have wide range of applications in the field of optoelectronics, nanoelectronics, space sciences, field-emission displays, thermoelectric converters and sensing devices.

  6. Transparent Conductive Nanofiber Paper for Foldable Solar Cells

    PubMed Central

    Nogi, Masaya; Karakawa, Makoto; Komoda, Natsuki; Yagyu, Hitomi; Nge, Thi Thi

    2015-01-01

    Optically transparent nanofiber paper containing silver nanowires showed high electrical conductivity and maintained the high transparency, and low weight of the original transparent nanofiber paper. We demonstrated some procedures of optically transparent and electrically conductive cellulose nanofiber paper for lightweight and portable electronic devices. The nanofiber paper enhanced high conductivity without any post treatments such as heating or mechanical pressing, when cellulose nanofiber dispersions were dropped on a silver nanowire thin layer. The transparent conductive nanofiber paper showed high electrical durability in repeated folding tests, due to dual advantages of the hydrophilic affinity between cellulose and silver nanowires, and the entanglement between cellulose nanofibers and silver nanowires. Their optical transparency and electrical conductivity were as high as those of ITO glass. Therefore, using this conductive transparent paper, organic solar cells were produced that achieved a power conversion of 3.2%, which was as high as that of ITO-based solar cells. PMID:26607742

  7. Airborne Transparencies.

    ERIC Educational Resources Information Center

    Horne, Lois Thommason

    1984-01-01

    Starting from a science project on flight, art students discussed and investigated various means of moving in space. Then they made acetate illustrations which could be used as transparencies. The projection phenomenon made the illustrations look airborne. (CS)

  8. A Resource Guide on Indian Arts and Crafts for Elementary and Secondary Teachers.

    ERIC Educational Resources Information Center

    Fagot, Madeleine

    American Indian arts and crafts reference materials (published 1923-1973) are listed in this annotated resource guide for elementary and secondary school teachers. Approximately 260 listings are given for: books, films and filmstrips, maps and charts, picture sets, magazines, bibliographies and indexes, slide kits, transparencies, distributor's…

  9. Visibly transparent polymer solar cells produced by solution processing.

    PubMed

    Chen, Chun-Chao; Dou, Letian; Zhu, Rui; Chung, Choong-Heui; Song, Tze-Bin; Zheng, Yue Bing; Hawks, Steve; Li, Gang; Weiss, Paul S; Yang, Yang

    2012-08-28

    Visibly transparent photovoltaic devices can open photovoltaic applications in many areas, such as building-integrated photovoltaics or integrated photovoltaic chargers for portable electronics. We demonstrate high-performance, visibly transparent polymer solar cells fabricated via solution processing. The photoactive layer of these visibly transparent polymer solar cells harvests solar energy from the near-infrared region while being less sensitive to visible photons. The top transparent electrode employs a highly transparent silver nanowire-metal oxide composite conducting film, which is coated through mild solution processes. With this combination, we have achieved 4% power-conversion efficiency for solution-processed and visibly transparent polymer solar cells. The optimized devices have a maximum transparency of 66% at 550 nm.

  10. Transparency and oversight in local wellness policies.

    PubMed

    Chriqui, Jamie F; Chaloupka, Frank J

    2011-02-01

    Advocates have called for increased wellness policy transparency and oversight through the use of health advisory councils. This study examines (1) wellness policy transparency, (2) advisory council requirements, (3) factors associated with each, and (4) whether transparency or advisory council requirements are indicative of a stronger policy addressing nutrition and physical activity. Policies for school year 2007-2008 were obtained from a nationally representative sample of 641 districts and analyzed for their applicability to elementary, middle, and high school levels. Main outcome measures included (1) policy transparency (online availability), (2) advisory council requirements, and (3) overall policy strength. T-tests assessed variability in policy strength by transparency and advisory council requirements. Multivariate logistic and linear regression analyses controlled for district size, socioeconomic status, race/ethnicity, region, and locale; models of advisory council/policy strength relationships also controlled for state advisory council requirements. More than 41% of districts posted wellness policies online and more than 43% required advisory councils. Transparency was less likely in small-/medium-sized and non-southern districts; and, for elementary school policies, most common in majority Hispanic districts. Advisory council requirements were less likely in small-/medium-sized districts for middle/high school policies and more likely in majority Hispanic districts for elementary school policies. After adjusting for all covariates, transparency was not associated with policy strength, but advisory council requirements significantly predicted policy strength. Transparency may facilitate awareness, but it does not mean that wellness policies will be stronger; however, advisory council requirements may be a marker for stronger policies. © 2011, American School Health Association.

  11. Self-Powered Human-Interactive Transparent Nanopaper Systems.

    PubMed

    Zhong, Junwen; Zhu, Hongli; Zhong, Qize; Dai, Jiaqi; Li, Wenbo; Jang, Soo-Hwan; Yao, Yonggang; Henderson, Doug; Hu, Qiyi; Hu, Liangbing; Zhou, Jun

    2015-07-28

    Self-powered human-interactive but invisible electronics have many applications in anti-theft and anti-fake systems for human society. In this work, for the first time, we demonstrate a transparent paper-based, self-powered, and human-interactive flexible system. The system is based on an electrostatic induction mechanism with no extra power system appended. The self-powered, transparent paper device can be used for a transparent paper-based art anti-theft system in museums or for a smart mapping anti-fake system in precious packaging and documents, by virtue of the advantages of adding/removing freely, having no impairment on the appearance of the protected objects, and being easily mass manufactured. This initial study bridges the transparent nanopaper with a self-powered and human-interactive electronic system, paving the way for the development of smart transparent paper electronics.

  12. Sounds Alive: A Noise Workbook. Teacher's Guide.

    ERIC Educational Resources Information Center

    Dickman, Donna McCord

    Designed to assist elementary school teachers in stimulating students' interest in noise pollution, this manual provides information which supplements the "Sounds Alive Student Workbook." Suggested for each section of the workbook are discussion questions, experiments, projects and field trips. The guide is intended to provide teachers…

  13. National Nutrition Education Clearing House Reference List, Secondary Teaching Materials and Teacher References.

    ERIC Educational Resources Information Center

    National Nutrition Education Clearing House, Berkeley, CA.

    A reference list of teaching materials and teacher guides in the field of nutrition is compiled in this pamphlet. Primary emphasis is on resources for secondary grades. The section on teaching materials includes books, pamphlets, leaflets, posters, charts, transparencies, ditto masters, kits, games, films, filmstrips, records, TV videotapes, and…

  14. Transparency in Europe: A Quantitative Study.

    PubMed

    Bouder, Frederic; Way, Dominic; Löfstedt, Ragnar; Evensen, Darrick

    2015-07-01

    In recent years, European pharmaceutical regulators have increasingly committed to heightening access to raw safety-related data as part of a wave of transparency initiatives (e.g., providing public Internet-mediated access to clinical trials data). Yet, the regulators--who are under significant pressure--have not yet benefited from a systematic review of this new policy. In seeking to inject much needed evidence, this article explores the effects of new transparency policies designed to promote meaningful communication of risks and benefits to patients. Results of a cross-national European survey with respondents from Great Britain, the Netherlands, Spain, France, Germany, and Sweden (N = 5,648) shed light on how patients and the public are likely to react to the regulators' new transparency policies. The findings demonstrate clear national variations in how European citizens are likely to react and emphasize the need to develop evidence-based, reasoned transparency policies that integrate benefit-risk communication. The authors conclude by providing six specific recommendations, informed by the study, that seek to improve the European transparency model both within the medical field and across health, safety, and environmental policy domains. © 2015 Society for Risk Analysis.

  15. Methods and apparatus for transparent display using scattering nanoparticles

    DOEpatents

    Hsu, Chia Wei; Qiu, Wenjun; Zhen, Bo; Shapira, Ofer; Soljacic, Marin

    2017-06-14

    Transparent displays enable many useful applications, including heads-up displays for cars and aircraft as well as displays on eyeglasses and glass windows. Unfortunately, transparent displays made of organic light-emitting diodes are typically expensive and opaque. Heads-up displays often require fixed light sources and have limited viewing angles. And transparent displays that use frequency conversion are typically energy inefficient. Conversely, the present transparent displays operate by scattering visible light from resonant nanoparticles with narrowband scattering cross sections and small absorption cross sections. More specifically, projecting an image onto a transparent screen doped with nanoparticles that selectively scatter light at the image wavelength(s) yields an image on the screen visible to an observer. Because the nanoparticles scatter light at only certain wavelengths, the screen is practically transparent under ambient light. Exemplary transparent scattering displays can be simple, inexpensive, scalable to large sizes, viewable over wide angular ranges, energy efficient, and transparent simultaneously.

  16. Methods and apparatus for transparent display using scattering nanoparticles

    DOEpatents

    Hsu, Chia Wei; Qiu, Wenjun; Zhen, Bo; Shapira, Ofer; Soljacic, Marin

    2016-05-10

    Transparent displays enable many useful applications, including heads-up displays for cars and aircraft as well as displays on eyeglasses and glass windows. Unfortunately, transparent displays made of organic light-emitting diodes are typically expensive and opaque. Heads-up displays often require fixed light sources and have limited viewing angles. And transparent displays that use frequency conversion are typically energy inefficient. Conversely, the present transparent displays operate by scattering visible light from resonant nanoparticles with narrowband scattering cross sections and small absorption cross sections. More specifically, projecting an image onto a transparent screen doped with nanoparticles that selectively scatter light at the image wavelength(s) yields an image on the screen visible to an observer. Because the nanoparticles scatter light at only certain wavelengths, the screen is practically transparent under ambient light. Exemplary transparent scattering displays can be simple, inexpensive, scalable to large sizes, viewable over wide angular ranges, energy efficient, and transparent simultaneously.

  17. Allied Health Teacher's Manual. Project HIRE.

    ERIC Educational Resources Information Center

    Gardner, David C.; And Others

    Designed as supplemental material to on-going instruction in the vocational program, this teacher's manual to the Allied Health series is intended to accompany three dictionary booklets (available as CE 024 407-409) for use by handicapped students to help them master the core vocabulary taught in the trade. Information presented in the manual…

  18. Culinary Arts Teachers Manual. Project HIRE.

    ERIC Educational Resources Information Center

    Gardner, David C.; And Others

    Designed as supplemental material to on-going instruction in the vocational program, this teacher's manual to the Culinary Arts series is intended to accompany three dictionary booklets (available as CE 024 415-417) for use by handicapped students to help them master the core vocabulary taught in the trade. Information presented in the manual…

  19. Open Wide and Trek Inside. Grades 1-2. NIH Curriculum Supplement Series.

    ERIC Educational Resources Information Center

    Biological Sciences Curriculum Study, Colorado Springs.

    This document, an inquiry-based curriculum supplement that includes materials for both teachers and students, is designed to develop an understanding among students about oral health. Contents include: (1) "About the National Institutes of Health"; (2) "About the National Institute of Dental and Craniofacial Research"; (3) "Introduction to Open…

  20. Le journal: une introduction (The Newspaper: An Introduction). Teacher's Guide [and Module].

    ERIC Educational Resources Information Center

    Scane, Joyce; Ullmann, Rebecca

    A reading activity module based on the newspaper was designed for students in grades 6-8 who have had two years of instruction in French as a second language. The module includes the teacher's guide, the facsimile newspaper, and transparencies for class activities. Module objectives are to introduce students to both newspaper reading and…

  1. Transparent Materials for Armor - A Cost Study

    DTIC Science & Technology

    2010-01-11

    UNCLASSIFIED UNCLASSIFIED Example: M1114 Recent History 2006 “Iraqi Pope Glass” 2004-2005 GPK (Gunner Protection Kit) Early OIF Curb Wt: 10,300lbs GVW...12,100lbs More Vehicles More Attacks More Glass UNCLASSIFIED UNCLASSIFIED Future Transparent Gun Shields Requirement: Upgrade GPKs with transparent...Objective AHI GS & GPK Baseline Field Modified GS & APK UNCLASSIFIED UNCLASSIFIED •Average Total ($) for transparent armor increased by about 20% (each

  2. Geography Education Research in Serbia: A Teacher's Perspective

    ERIC Educational Resources Information Center

    Rajovic, Goran; Bulatovic, Jelisavka

    2017-01-01

    In all European Union countries have harmonized attitudes on the need and improving the quality geographic of education and his innovating. Modernization of geographic education is unthinkable without quality professional and personal development of teacher's geography. Renewal, modernization and supplement professional knowledge and skills…

  3. Faces of Homelessness: A Teacher's Guide.

    ERIC Educational Resources Information Center

    Massachusetts State Dept. of Education, Quincy.

    A brief teacher's guide supplements a videotape of two 15-minute segments on homelessness. The stated objective of the video is to cover the issues of homelessness as they exist today and to dispel the stereotypes of homelessness leftover from earlier eras. A family which has found itself homeless is introduced and then aspects of the phenomenon…

  4. Portfolio as a Means of Promoting Autonomous Learning in Teacher Education: A Quasi-Experimental Study

    ERIC Educational Resources Information Center

    Meeus, Wil; Van Petegem, Peter; Meijer, Joost

    2008-01-01

    Background: The predominant dissertation model used in teacher education courses in Flanders is the "literature study with practical processing". Despite the practical supplement, this traditional model does not fit sufficiently well with autonomous learning as the objective of modern teacher education dissertations. This study reports on the…

  5. Effects of a Supplemental Vocabulary Program on Word Knowledge and Passage Comprehension

    ERIC Educational Resources Information Center

    Apthorp, Helen; Randel, Bruce; Cherasaro, Trudy; Clark, Tedra; McKeown, Margaret; Beck, Isabel

    2012-01-01

    A cluster randomized trial estimated the effects of a supplemental vocabulary program, Elements of Reading[R]: vocabulary on student vocabulary and passage comprehension in moderate- to high-poverty elementary schools. Forty-four schools participated over a period spanning 2 consecutive school years. At baseline, 1,057 teachers and 16,471 students…

  6. Graphene Transparent Conductive Electrodes for Next- Generation Microshutter Arrays

    NASA Technical Reports Server (NTRS)

    Li, Mary; Sultana, Mahmooda; Hess, Larry

    2012-01-01

    Graphene is a single atomic layer of graphite. It is optically transparent and has high electron mobility, and thus has great potential to make transparent conductive electrodes. This invention contributes towards the development of graphene transparent conductive electrodes for next-generation microshutter arrays. The original design for the electrodes of the next generation of microshutters uses indium-tin-oxide (ITO) as the electrode material. ITO is widely used in NASA flight missions. The optical transparency of ITO is limited, and the material is brittle. Also, ITO has been getting more expensive in recent years. The objective of the invention is to develop a graphene transparent conductive electrode that will replace ITO. An exfoliation procedure was developed to make graphene out of graphite crystals. In addition, large areas of single-layer graphene were produced using low-pressure chemical vapor deposition (LPCVD) with high optical transparency. A special graphene transport procedure was developed for transferring graphene from copper substrates to arbitrary substrates. The concept is to grow large-size graphene sheets using the LPCVD system through chemical reaction, transfer the graphene film to a substrate, dope graphene to reduce the sheet resistance, and pattern the film to the dimension of the electrodes in the microshutter array. Graphene transparent conductive electrodes are expected to have a transparency of 97.7%. This covers the electromagnetic spectrum from UV to IR. In comparison, ITO electrodes currently used in microshutter arrays have 85% transparency in mid-IR, and suffer from dramatic transparency drop at a wavelength of near-IR or shorter. Thus, graphene also has potential application as transparent conductive electrodes for Schottky photodiodes in the UV region.

  7. Making Practice Visible: A Collaborative Self-Study of Tiered Teaching in Teacher Education

    ERIC Educational Resources Information Center

    Garbett, Dawn; Heap, Rena

    2011-01-01

    In this article we document the impact of tiered teaching on making the complexity of pedagogy transparent when teaching science education to pre-service primary teachers. Teaching science methods classes together and researching our teaching has enabled us to reframe our assumptions and move beyond the simplistic and misleading idea that teacher…

  8. Transparency in Distributed File Systems

    DTIC Science & Technology

    1989-01-01

    ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT, TASK Computer Science Department AREA & WORK UNIT NUMBERS 734 Comouter Studies Bldc . University of...sistency control , file and director) placement, and file and directory migration in a way that pro- 3 vides full network transparency. This transparency...areas of naming, replication, con- sistency control , file and directory placement, and file and directory migration in a way that pro- 3 vides full

  9. An Assessment of Teachers' Preference for Lecture Delivery Methods in Medical Education

    ERIC Educational Resources Information Center

    Seth, Vikas; Upadhyaya, Prerna; Ahmad, Mushtaq; Kumar, Virendra

    2010-01-01

    The aim of the study was to assess the medical teachers' preference for various lecture delivery methods like the lectures using chalkboard, utilizing transparencies with an overhead projector (OHP) or lectures using a PowerPoint presentation and their frequency of use of teaching aids. The faculty of the medical college was asked to fill in the…

  10. [The transparency commission: evaluation and re-evaluation].

    PubMed

    Bergmann, J F

    The purpose of the French Transparency Commission is to provide scientific advice concerning the usefulness, interest and good use of drugs. The work of the Transparency Commission lies at the interface between the French or European marketing approval procedures and the health and economic prerequisites of the French community. The opinion of the French Transparency Commission is used to assess the medical service provided by a new drug and the improvement of this medical service subsequent to its use. This opinion is taken into consideration for establishing the reimbursement rate applied by the social security organizations and the selling price set by the administration. The expert opinions and recommendations established by the Transparency Commission participate in implementing good use of drugs.

  11. Effects of the learning assistant experience on in-service teachers' practices

    NASA Astrophysics Data System (ADS)

    Gray, Kara E.; Webb, David C.; Otero, Valerie K.

    2012-02-01

    The Colorado Learning Assistant (LA) Program serves as a content-specific supplement to standard teacher preparation programs. In addition to transforming undergraduate STEM courses, it recruits and prepares math and science majors for teaching careers by involving university STEM faculty. The research reported here compares the teaching practices of in-service teachers who participated in the LA experience as undergraduates to a comparison group of teachers who did not participate in the LA program as undergraduates but were certified to teach through the same program. We report on teachers' views of assessments and differences in their teaching practices. This analysis is based on interviews with approximately 30 teachers and observations of their classrooms throughout their induction years of teaching. This work considers how the LA program may help improve current teacher preparation models.

  12. Supplementing Art Curriculum. I, Glass. II. Local Evaluation Report, Fiscal Year 1973.

    ERIC Educational Resources Information Center

    Kohtz, Karen

    A local evaluation report and an information packet describing activities developed under this mini-grant deal with a supplemental art curriculum on glass work. Over a four month period, a glass workshop was planned to emphasize the creative possibilities of glass and information packets were developed to train teachers to conduct classroom art…

  13. Zinc oxyfluoride transparent conductor

    DOEpatents

    Gordon, Roy G.

    1991-02-05

    Transparent, electrically conductive and infrared-reflective films of zinc oxyfluoride are produced by chemical vapor deposition from vapor mixtures of zinc, oxygen and fluorine-containing compounds. The substitution of fluorine for some of the oxygen in zinc oxide results in dramatic increases in the electrical conductivity. For example, diethyl zinc, ethyl alcohol and hexafluoropropene vapors are reacted over a glass surface at 400.degree. C. to form a visibly transparent, electrically conductive, infrared reflective and ultraviolet absorptive film of zinc oxyfluoride. Such films are useful in liquid crystal display devices, solar cells, electrochromic absorbers and reflectors, energy-conserving heat mirrors, and antistatic coatings.

  14. Stereo transparency and the disparity gradient limit

    NASA Technical Reports Server (NTRS)

    McKee, Suzanne P.; Verghese, Preeti

    2002-01-01

    Several studies (Vision Research 15 (1975) 583; Perception 9 (1980) 671) have shown that binocular fusion is limited by the disparity gradient (disparity/distance) separating image points, rather than by their absolute disparity values. Points separated by a gradient >1 appear diplopic. These results are sometimes interpreted as a constraint on human stereo matching, rather than a constraint on fusion. Here we have used psychophysical measurements on stereo transparency to show that human stereo matching is not constrained by a gradient of 1. We created transparent surfaces composed of many pairs of dots, in which each member of a pair was assigned a disparity equal and opposite to the disparity of the other member. For example, each pair could be composed of one dot with a crossed disparity of 6' and the other with uncrossed disparity of 6', vertically separated by a parametrically varied distance. When the vertical separation between the paired dots was small, the disparity gradient for each pair was very steep. Nevertheless, these opponent-disparity dot pairs produced a striking appearance of two transparent surfaces for disparity gradients ranging between 0.5 and 3. The apparent depth separating the two transparent planes was correctly matched to an equivalent disparity defined by two opaque surfaces. A test target presented between the two transparent planes was easily detected, indicating robust segregation of the disparities associated with the paired dots into two transparent surfaces with few mismatches in the target plane. Our simulations using the Tsai-Victor model show that the response profiles produced by scaled disparity-energy mechanisms can account for many of our results on the transparency generated by steep gradients.

  15. Teachers' Perspectives of Ways to Improve an Elementary School's Supplemental Reading Program

    ERIC Educational Resources Information Center

    Clayton, JoAnn M.

    2012-01-01

    To improve students' reading abilities, an elementary school staff decided to supplement the regular curriculum with a free Internet reading program. To promote student participation in the supplemental program, the media specialist designed the Gumball Reading Program, which included student requirements and rewards. The requirements…

  16. Flexible transparent conductors based on metal nanowire networks

    DOE PAGES

    Guo, Chuan Fei; Ren, Zhifeng

    2015-04-01

    Few conductors are transparent and flexible. Metals have the best electrical conductivity, but they are opaque and stiff in bulk form. However, metals can be transparent and flexible when they are very thin or properly arranged on the nanoscale. This review focuses on the flexible transparent conductors based on percolating networks of metal. Specifically, we discuss the fabrication, the means to improve the electrical conductivity, the large stretchability and its mechanism, and the applications of these metal networks. We also suggest some criteria for evaluating flexible transparent conductors and propose some new research directions in this emerging field.

  17. Criminal Justice in America. Teacher's Guide. Second Edition.

    ERIC Educational Resources Information Center

    Croddy, Marshall; Hayes, Bill

    This teacher's guide outlines effective strategies for using "Criminal Justice in America." This comprehensive textbook on criminal justice may serve either as the foundation for a high school law-related education course or as a supplemental text for civics, government or contemporary-issues courses. Designed to foster critical thinking…

  18. Local modulation of double optomechanically induced transparency and amplification.

    PubMed

    Yang, Q; Hou, B P; Lai, D G

    2017-05-01

    We consider the probe absorption properties in a mechanically coupled optomechanical system in which the two coupled nanomechanical oscillators are driven by the time-dependent forces, respectively. It is found that the mechanical interaction splits the transparency window for a usual single-mode optomechanical system into two parts and then leads to appearance of the double optomechanically induced transparency. The distance between the two transparency positions (the frequency for the maximal transparency) is determined by the mechanical interaction amplitude. This can be explained by using optomechanical dressed-mode picture which is analogue to the interacting dark resonances in coherent atoms. When the mechanical resonators are driven by the external forces, the transparencies in the double-transparency spectrum can be increased into amplifications or be suppressed by tuning the amplitude of the forces. Additionally, it is shown that the double transparencies or the amplifications oscillate with the initial phases of the forces with a period of 2π. These investigations will be useful for more flexible controllability of multi-channel optical communication based on the optomechanical systems.

  19. Women's Studies: A Resource Guide for Teachers.

    ERIC Educational Resources Information Center

    British Columbia Dept. of Education, Victoria.

    Designed to help secondary teachers in British Columbia (Canada) supplement the curriculum, the guide contains a series of units focusing on women's studies. The units can be integrated into English, social studies, and guidance courses or used as a resource for the development of a women's studies course. Topics covered are reflected in the unit…

  20. Common Issues in World Regions. Teacher's Guide.

    ERIC Educational Resources Information Center

    Grewar, Melinda, Ed.

    This teacher's guide is designed to supplement eight 30-minute video programs each of which presents two cases studies that explore an issue from Northern American (United States and Canada) and Western European perspectives. The series of programs is intended to strengthen what junior and senior high school students in the United States and…

  1. Metacognitive and multimedia support of experiments in inquiry learning for science teacher preparation

    NASA Astrophysics Data System (ADS)

    Bruckermann, Till; Aschermann, Ellen; Bresges, André; Schlüter, Kirsten

    2017-04-01

    Promoting preservice science teachers' experimentation competency is required to provide a basis for meaningful learning through experiments in schools. However, preservice teachers show difficulties when experimenting. Previous research revealed that cognitive scaffolding promotes experimentation competency by structuring the learning process, while metacognitive and multimedia support enhance reflection. However, these support measures have not yet been tested in combination. Therefore, we decided to use cognitive scaffolding to support students' experimental achievements and supplement it by metacognitive and multimedia scaffolds in the experimental groups. Our research question is to what extent supplementing cognitive support by metacognitive and multimedia scaffolding further promotes experimentation competency. The intervention has been applied in a two-factorial design to a two-month experimental course for 63 biology teacher students in their first bachelor year. Pre-post-test measured experimentation competency in a performance assessment. Preservice teachers worked in groups of four. Therefore, measurement took place at group level (N = 16). Independent observers rated preservice teachers' group performance qualitatively on a theory-based system of categories. Afterwards, experimentation competency levels led to quantitative frequency analysis. The results reveal differing gains in experimentation competency but contrary to our hypotheses. Implications of combining scaffolding measures on promoting experimentation competency are discussed.

  2. Motion transparency: making models of motion perception transparent.

    PubMed

    Snowden; Verstraten

    1999-10-01

    In daily life our visual system is bombarded with motion information. We see cars driving by, flocks of birds flying in the sky, clouds passing behind trees that are dancing in the wind. Vision science has a good understanding of the first stage of visual motion processing, that is, the mechanism underlying the detection of local motions. Currently, research is focused on the processes that occur beyond the first stage. At this level, local motions have to be integrated to form objects, define the boundaries between them, construct surfaces and so on. An interesting, if complicated case is known as motion transparency: the situation in which two overlapping surfaces move transparently over each other. In that case two motions have to be assigned to the same retinal location. Several researchers have tried to solve this problem from a computational point of view, using physiological and psychophysical results as a guideline. We will discuss two models: one uses the traditional idea known as 'filter selection' and the other a relatively new approach based on Bayesian inference. Predictions from these models are compared with our own visual behaviour and that of the neural substrates that are presumed to underlie these perceptions.

  3. Method of forming macro-structured high surface area transparent conductive oxide electrodes

    DOEpatents

    Forman, Arnold J.; Chen, Zhebo; Jaramillo, Thomas F.

    2016-01-05

    A method of forming a high surface area transparent conducting electrode is provided that includes depositing a transparent conducting thin film on a conductive substrate, where the transparent conducting thin film includes transparent conductive particles and a solution-based transparent conducting adhesive layer which serves to coat and bind together the transparent conducting particles, and heat treating the transparent conducting adhesion layer on the conductive substrate, where an increased surface area transparent conducting electrode is formed.

  4. Research Studies on Electromagnetically Induced Transparency

    DTIC Science & Technology

    2010-01-20

    allowing the same simple equations to be used to simulate nonlinear and quantum optics with the N-photon states generated in this regime. One...induced transparency, photon interactions with atoms, nonclassical states of the electromagnetic field, including entangled photon states , quantum ...them. This is important because optical nonlinearities when produced using electromagnetically induced transparency continue to increase in the

  5. SCDC Spanish Curricula Units. Fine Arts, Unit 4, Grade 2, Supplements & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    The supplement and ditto packet to the unit four fine arts strand for second graders contains visual materials to aid the teacher in carrying out the instructional and assessment activities of this strand. Seatwork for individual students is featured along with materials intended for class participation activities. Illustrations, provided to help…

  6. Optically transparent/colorless polyimides

    NASA Technical Reports Server (NTRS)

    Stclair, A. K.; Stclair, T. L.; Slemp, W.; Ezzell, K. S.

    1985-01-01

    Several series of linear aromatic polyimide films have been synthesized and characterized with the objective of obtaining maximum optical transparency. Two approaches have been used as part of this structure-property relationship study. The first approach is to vary the molecular structure so as to separate chromophoric centers and reduce electronic interactions between polymer chains to lower the intensity of color in the resulting polymer films. A second and concurrent approach is to perform polymerizations with highly purified monomers. Glass transition temperatures of thermally cured polyimide films are obtained by thermomechanical analysis and thermal decomposition temperatures are determined by thermogravimetric analysis. Transmittance UV-visible spectra of the polyimide films are compared to that of a commercial polyimide film. Fully imidized films are tested for solubility in common organic solvents. The more transparent films prepared in this study are evaluated for use on second-surface mirror thermal control coating systems. Lightly colored to colorless films are characterized by UV-visible spectroscopy before and after exposure to 300 equivalent solar hours UV irradiation and varying doses of 1 MeV electron irradiation. The effects of monomer purity, casting solvent and cure atmosphere on polyimide film transparency are also investigated.

  7. Composition through Construction: A Less Teacher-Directed Approach (EJ Update).

    ERIC Educational Resources Information Center

    Tabachnick, Vicki

    1992-01-01

    Questions traditional composition techniques and their effects on student thinking and problem solving. Demonstrates how one high school English teacher responded to these classroom issues by reading relevant research and supplementing it with a study conducted on her own students. (HB)

  8. "On Cloud Nine" and "On All Fours": Which Is More Transparent? Elements in EFL Learners' Transparency Assumptions

    ERIC Educational Resources Information Center

    Lin, Crystal Jia-yi

    2015-01-01

    Idiom transparency refers to how speakers think the meaning of the individual words contributes to the figurative meaning of an idiom as a whole (Gibbs, Nayak, & Cutting, 1989). However, it is not clear how speakers or language learners form their assumptions about an idiom's transparency level. This study set out to discover whether there are…

  9. Pre-Service Teachers' Perceptions of simSchool as Preparation for Inclusive Education: A Pilot Study

    ERIC Educational Resources Information Center

    Rayner, Christopher; Fluck, Andrew

    2014-01-01

    The shift towards the inclusion of students with disabilities in regular schools has meant that general classroom teachers need to be skilled in educating students with a diverse range of needs and abilities. Together with theoretical study and as a supplement to practical experience, teacher educators have begun to explore virtual and simulated…

  10. The Value of Transparency in Distributed Solar PV Markets

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    OShaughnessy, Eric J; Zamzam, Ahmed S

    Market transparency refers to the degree of customer awareness of product options and fair market prices for a given good. In The Value of Transparency in Distributed Solar PV Markets, we use residential solar photovoltaic (PV) quote data to study the value of transparency in distributed solar PV markets. We find that improved market transparency results in lower installation offer prices. Further, the results of this study suggest that PV customers benefit from gaining access to more PV quotes.

  11. Transparent graphene microstrip filters for wireless communications

    NASA Astrophysics Data System (ADS)

    Wang, Jinchen; Guan, Yifei; Yu, Hua; Li, Na; Wang, Shuopei; Shen, Cheng; Dai, Zhijiang; Gan, Decheng; Yang, Rong; He, Songbai; Zhang, Guangyu

    2017-08-01

    A microstrip is an indispensable component for wireless communication circuits. With the development of 5G technology, optically transparent microstrip filters urgently need to be developed. In this work, we have theoretically and experimentally demonstrated the immense potential of graphene microstrips for transparent wireless communication circuits in the 5G era. Both wideband and dual-band transparent graphene microstrip filters have shown more than 80% optical transmissivity in the region from 250 nm to 2000 nm with good frequency responses. S and C band microwave signals can transmit along the graphene microstrip lines effectively while coupling excitations produce relatively large insertion losses. Our results show that transparent microstrips designed with high-quality graphene will largely scale down the size of the wireless devices and thus play an irreplaceable role in the 5G era.

  12. The Music Industry Conference Guide for Music Educators. A Supplement to the Music Educators Journal.

    ERIC Educational Resources Information Center

    Music Educators Journal, 1988

    1988-01-01

    This supplement is a comprehensive guide to the music industry designed for music teachers. Included are tips for contacting music businesses and suggestions on ordering music, robes, instruments, computer software, and other supplies. Includes an annotated directory of Music Industry Conference members. (JDH)

  13. Accelerated Reader Program: What Do Teachers Really Think?

    ERIC Educational Resources Information Center

    Smith, Amy Frances; Westberg, Karen; Hejny, Anne

    2017-01-01

    What do teachers really think about the Accelerated Reader program, a widely used supplemental, independent reading program in which their students read fiction and non-fiction books of their choice and take brief online comprehension quizzes about the books? The Accelerated Reader (AR) program was designed by Renaissance Learning Company to…

  14. Demonstration of transparent solar array module design

    NASA Technical Reports Server (NTRS)

    Pack, G. J.

    1984-01-01

    This report discusses the design, development, fabrication and testing of IR transparent solar array modules. Three modules, consisting of a baseline design using back surface reflector cells, and two modules using gridded back contact, IR transparent cells, were subjected to vacuum thermal balance testing to verify analytical predictions of lower operating emperature and increased efficiency. As a result of this test program, LMSC has verified that a significant degree of IR transparency can be designed into a flexible solar array. Test data correlates with both steady state and transient thermal analysis.

  15. Transparent, conformable, active multielectrode array using organic electrochemical transistors.

    PubMed

    Lee, Wonryung; Kim, Dongmin; Matsuhisa, Naoji; Nagase, Masae; Sekino, Masaki; Malliaras, George G; Yokota, Tomoyuki; Someya, Takao

    2017-10-03

    Mechanically flexible active multielectrode arrays (MEA) have been developed for local signal amplification and high spatial resolution. However, their opaqueness limited optical observation and light stimulation during use. Here, we show a transparent, ultraflexible, and active MEA, which consists of transparent organic electrochemical transistors (OECTs) and transparent Au grid wirings. The transparent OECT is made of Au grid electrodes and has shown comparable performance with OECTs with nontransparent electrodes/wirings. The transparent active MEA realizes the spatial mapping of electrocorticogram electrical signals from an optogenetic rat with 1-mm spacing and shows lower light artifacts than noise level. Our active MEA would open up the possibility of precise investigation of a neural network system with direct light stimulation.

  16. Transparent solar antenna of 28 GHz using transparent conductive oxides (TCO) thin film

    NASA Astrophysics Data System (ADS)

    Ali, N. I. Mohd; Misran, N.; Mansor, M. F.; Jamlos, M. F.

    2017-05-01

    This paper presents the analysis of 28GHz solar patch antenna using the variations of transparent conductive oxides (TCO) thin film as the radiating patch. Solar antenna is basically combining the function of antenna and solar cell into one device and helps to maximize the usage of surface area. The main problem of the existing solar antenna is the radiating patch which made of nontransparent material, such as copper, shadowing the solar cell and degrades the total solar efficiency. Hence, by using the transparent conductive oxides (TCO) thin film as the radiating patch, this problem can be tackled. The TCO thin film used is varied to ITO, FTO, AgHT-4, and AgHT-8 along with glass as substrate. The simulation of the antenna executed by using Computer Simulation Technology (CST) Microwave Studio software demonstrated at 28 GHz operating frequency for 5G band applications. The performance of the transparent antennas is compared with each other and also with the nontransparent patch antenna that using Rogers RT5880 as substrate, operating at the same resonance frequency and then, the material that gives the best performance is identified.

  17. Supporting teachers and children in schools: the effectiveness and cost-effectiveness of the Incredible Years teacher classroom management programme in primary school children: a cluster randomised controlled trial, with parallel economic and process evaluations.

    PubMed

    Ford, Tamsin; Edwards, Vanessa; Sharkey, Siobhan; Ukoumunne, Obioha C; Byford, Sarah; Norwich, Brahm; Logan, Stuart

    2012-08-30

    Childhood antisocial behaviour has high immediate and long-term costs for society and the individual, particularly in relation to mental health and behaviours that jeopardise health. Managing challenging behaviour is a commonly reported source of stress and burn out among teachers, ultimately resulting in a substantial number leaving the profession. Interventions to improve parenting do not transfer easily to classroom-based problems and the most vulnerable parents may not be easily able to access them. Honing teachers' skills in proactive behaviour management and the promotion of socio-emotional regulation, therefore, has the potential to improve both child and teacher mental health and well-being and the advantage that it might potentially benefit all the children subsequently taught by any teacher that accesses the training. Cluster randomised controlled trial (RCT) of the Incredible Years teacher classroom management (TCM) course with combined economic and process evaluations.One teacher of children aged 4-9 years, from 80 schools in the South West Peninsula will be randomised to attend the TCM (intervention arm) or to "teach as normal" (control arm). The primary outcome measure will be the total difficulties score from the Strengths and Difficulties Questionnaire (SDQ) completed by the current class teachers prior to randomisation, and at 9, 18 and 30 months follow-up, supplemented by parent SDQs. Secondary measures include academic attainment (teacher report supplemented by direct measurement in a sub-sample), children's enjoyment of school, and teacher reports of their professional self-efficacy, and levels of burn out and stress, supplemented by structured observations of teachers classroom management skills in a subsample. Cost data for the economic evaluation will be based on parental reports of services accessed. Cost-effectiveness, using the SDQ as the measure of effect, will be examined over the period of the RCT and over the longer term using decision

  18. Limits of transparency of transparent conducting oxides

    NASA Astrophysics Data System (ADS)

    Peelaers, Hartwin

    A fundamental understanding of the factors that limit transparency in transparent conducting oxides (TCOs) is essential for further progress in materials and applications. These materials have a sufficiently large band gap, so that direct optical transitions do not lead to absorption of light within the visible spectrum. Since the presence of free carriers is essential for conductivity and thus for device applications, this introduces the possibility of additional absorption processes. In particular, indirect processes are possible, and these will constitute a fundamental limit of the material. The Drude theory is widely used to describe free-carrier absorption, but it is phenomenological in nature and tends to work poorly at shorter wavelengths, where band-structure effects are important. We will present calculations of phonon- and defect-assisted free-carrier absorption in a TCO completely from first principles. We will focus in detail on SnO2, but the methodology is general and we will also compare the results obtained for other TCO materials such as In2O3. These calculations provide not just quantitative results but also deeper insights in the mechanisms that govern absorption processes, which is essential for engineering improved materials to be used in more efficient devices. This work was performed in collaboration with E. Kioupakis and C.G. Van de Walle and was supported by ARO and NSF.

  19. Impacting the Science Community through Teacher Development: Utilizing Virtual Learning.

    PubMed

    Boulay, Rachel; van Raalte, Lisa

    2014-01-01

    Commitment to the STEM (science, technology, engineering, math) pipeline is slowly declining despite the need for professionals in the medical field. Addressing this, the John A. Burns School of Medicine developed a summer teacher-training program with a supplemental technology-learning component to improve science teachers' knowledge and skills of Molecular Biology. Subsequently, students' skills, techniques, and application of molecular biology are impacted. Science teachers require training that will prepare them for educating future professionals and foster interest in the medical field. After participation in the program and full access to the virtual material, twelve high school science teachers completed a final written reflective statement to evaluate their experiences. Using thematic analysis, knowledge and classroom application were investigated in this study. Results were two-fold: teachers identified difference areas of gained knowledge from the teacher-training program and teachers' reporting various benefits in relation to curricula development after participating in the program. It is concluded that participation in the program and access to the virtual material will impact the science community by updating teacher knowledge and positively influencing students' experience with science.

  20. What to Do If They Fire: The Remedial Reading Teacher? The Special Education Teacher? The Learning Disabilities Teacher? Proceedings of the Annual Spring Reading Conference (11th, Rutgers University, April 1976).

    ERIC Educational Resources Information Center

    Steig, Janet B., Ed.

    The articles in this document present ways in which teachers can teach effectively in classrooms made up of a more diverse population (in terms of ability) than has been the case in the recent past, when more supplemental services were available outside the classroom. Topics of interest are working with smaller units in the teaching of reading,…

  1. ETIPS: Using Cases with Virtual Schools to Prepare for, Extend, and Deepen Preservice Teachers' Field Experiences

    ERIC Educational Resources Information Center

    Dexter, Sara L.; Riedel, Eric; Scharber, Cassandra

    2008-01-01

    Field experiences are identified as an important component in the preparation of new teachers. As such, methods to supplement field experiences with pre- and post-activities that ready preservice teachers to effectively learn from them warrant further examination. This paper presents one tool that has been used successfully to improve preservice…

  2. Interplay between transparency and efficiency in dye sensitized solar cells.

    PubMed

    Tagliaferro, Roberto; Colonna, Daniele; Brown, Thomas M; Reale, Andrea; Di Carlo, Aldo

    2013-02-11

    In this paper we analyze the interplay between transparency and efficiency in dye sensitized solar cells by varying fabrication parameters such as the thickness of the nano-crystalline TiO(2) layer, the dye loading and the dye type. Both transparency and efficiency show a saturation trend when plotted versus dye loading. By introducing the transparency-efficiency plot, we show that the relation between transparency and efficiency is linear and is almost independent on the TiO(2) thickness for a certain thickness range. On the contrary, the relation between transparency and efficiency depends strongly on the type of the dye. Moreover, we show that co-sensitization techniques can be effectively used to access regions of the transparency-efficiency space that are forbidden for single dye sensitization. The relation found between transparency and efficiency (T&E) can be the general guide for optimization of Dye Solar Cells in building integration applications.

  3. Brightness and transparency in the early visual cortex.

    PubMed

    Salmela, Viljami R; Vanni, Simo

    2013-06-24

    Several psychophysical studies have shown that transparency can have drastic effects on brightness and lightness. However, the neural processes generating these effects have remained unresolved. Several lines of evidence suggest that the early visual cortex is important for brightness perception. While single cell recordings suggest that surface brightness is represented in the primary visual cortex, the results of functional magnetic resonance imaging (fMRI) studies have been discrepant. In addition, the location of the neural representation of transparency is not yet known. We investigated whether the fMRI responses in areas V1, V2, and V3 correlate with brightness and transparency. To dissociate the blood oxygen level-dependent (BOLD) response to brightness from the response to local border contrast and mean luminance, we used variants of White's brightness illusion, both opaque and transparent, in which luminance increments and decrements cancel each other out. The stimuli consisted of a target surface and a surround. The surround luminance was always sinusoidally modulated at 0.5 Hz to induce brightness modulation to the target. The target luminance was constant or modulated in counterphase to null brightness modulation. The mean signal changes were calculated from the voxels in V1, V2, and V3 corresponding to the retinotopic location of the target surface. The BOLD responses were significantly stronger for modulating brightness than for stimuli with constant brightness. In addition, the responses were stronger for transparent than for opaque stimuli, but there was more individual variation. No interaction between brightness and transparency was found. The results show that the early visual areas V1-V3 are sensitive to surface brightness and transparency and suggest that brightness and transparency are represented separately.

  4. Contour junctions defined by dynamic image deformations enhance perceptual transparency.

    PubMed

    Kawabe, Takahiro; Nishida, Shin'ya

    2017-11-01

    The majority of work on the perception of transparency has focused on static images with luminance-defined contour junctions, but recent work has shown that dynamic image sequences with dynamic image deformations also provide information about transparency. The present study demonstrates that when part of a static image is dynamically deformed, contour junctions at which deforming and nondeforming contours are connected facilitate the deformation-based perception of a transparent layer. We found that the impression of a transparent layer was stronger when a dynamically deforming area was adjacent to static nondeforming areas than when presented alone. When contour junctions were not formed at the dynamic-static boundaries, however, the impression of a transparent layer was not facilitated by the presence of static surrounding areas. The effect of the deformation-defined junctions was attenuated when the spatial pattern of luminance contrast at the junctions was inconsistent with the perceived transparency related to luminance contrast, while the effect did not change when the spatial luminance pattern was consistent with it. In addition, the results showed that contour completions across the junctions were required for the perception of a transparent layer. These results indicate that deformation-defined junctions that involve contour completion between deforming and nondeforming regions enhance the perception of a transparent layer, and that the deformation-based perceptual transparency can be promoted by the simultaneous presence of appropriately configured luminance and contrast-other features that can also by themselves produce the sensation of perceiving transparency.

  5. Supplementing Literacy Instruction with a Media-Rich Intervention: Results of a Randomized Controlled Trial

    ERIC Educational Resources Information Center

    Penuel, William R.; Bates, Lauren; Gallagher, Lawrence P.; Pasnik, Shelley; Llorente, Carlin; Townsend, Eve; Hupert, Naomi; Dominguez, Ximena; VanderBorght, Mieke

    2012-01-01

    This study investigates whether a curriculum supplement organized as a sequence of teacher-led literacy activities using digital content from public educational television programs can improve early literacy outcomes of low-income preschoolers. The study sample was 436 children in 80 preschool classrooms in California and New York. Preschool…

  6. Transparent, conformable, active multielectrode array using organic electrochemical transistors

    PubMed Central

    Lee, Wonryung; Kim, Dongmin; Matsuhisa, Naoji; Nagase, Masae; Sekino, Masaki; Malliaras, George G.; Yokota, Tomoyuki; Someya, Takao

    2017-01-01

    Mechanically flexible active multielectrode arrays (MEA) have been developed for local signal amplification and high spatial resolution. However, their opaqueness limited optical observation and light stimulation during use. Here, we show a transparent, ultraflexible, and active MEA, which consists of transparent organic electrochemical transistors (OECTs) and transparent Au grid wirings. The transparent OECT is made of Au grid electrodes and has shown comparable performance with OECTs with nontransparent electrodes/wirings. The transparent active MEA realizes the spatial mapping of electrocorticogram electrical signals from an optogenetic rat with 1-mm spacing and shows lower light artifacts than noise level. Our active MEA would open up the possibility of precise investigation of a neural network system with direct light stimulation. PMID:28923928

  7. Transparency in Canadian public drug advisory committees.

    PubMed

    Rosenberg-Yunger, Zahava R S; Bayoumi, Ahmed M

    2014-11-01

    Transparency in health care resource allocation decisions is a criterion of a fair process. We used qualitative methods to explore transparency across 11 Canadian drug advisory committees. We developed seven criteria to assess transparency (disclosure of members' names, disclosure of membership selection criteria, disclosure of conflict of interest guidelines and members' conflicts, public posting of decisions not to fund drugs, public posting of rationales for decisions, stakeholder input, and presence of an appeals mechanism) and two sub-criteria for when rationales were posted (direct website link and readability). We interviewed a purposeful sample of key informants who were conversant in English and a current or past member of either a committee or a stakeholder group. We analyzed data using a thematic approach. Interviewing continued until saturation was reached. We examined documents from 10 committees and conducted 27 interviews. The median number of criteria addressed by committees was 2 (range 0-6). Major interview themes included addressing: (1) accessibility issues, including stakeholders' degree of access to the decision making process and appeal mechanisms; (2) communication issues, including improving internal and external communication and public access to information; and (3) confidentiality issues, including the use of proprietary evidence. Most committees have some mechanisms to address transparency but none had a fully transparent process. The most important ways to improve transparency include creating formal appeal mechanisms, improving communication, and establishing consistent rules about the use of, and public access to, proprietary evidence. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  8. Synthesis of transparent dispersions of aluminium hydroxide nanoparticles

    NASA Astrophysics Data System (ADS)

    Chen, Bo; Wang, Jie-Xin; Wang, Dan; Zeng, Xiao-Fei; Clarke, Stuart M.; Chen, Jian-Feng

    2018-07-01

    Transparent dispersions of inorganic nanoparticles are attractive materials in many fields. However, a facile method for preparing such dispersions of aluminium hydroxide nanoparticles is yet to be realized. Here, we report a direct reactive method to prepare transparent dispersions of pseudo-boehmite nanoparticles (1 wt%) without any surface modification, and with an average particle size of 80 nm in length and 10 nm in width, as well as excellent optical transparency over 94% in the visible range. Furthermore, transparent dispersions of boehmite nanoparticles (1.5 wt%) were also achieved after an additional hydrothermal treatment. However, the optical transparency of dispersions decreased with the rise of hydrothermal temperature and the shape of particles changed from rhombs to hexagons. In particular, monodisperse hexagonal boehmite nanoplates with an average lateral size of 58 nm and a thickness of 12.5 nm were obtained at a hydrothermal temperature of 220 °C. The selectivity of crystal growth direction was speculated as the possible formation mechanism of these as-prepared aluminium hydroxide nanoparticles. Besides, two values of 19.6 wt% and 14.64 wt% were separately measured for the weight loss of pseudo-boehmite and boehmite nanoparticles after a continuous heating, indicating their potential flame-resistant applications in the fabrication of plastic electronics and optical devices with high transparency.

  9. Synthesis of transparent dispersions of aluminium hydroxide nanoparticles.

    PubMed

    Chen, Bo; Wang, Jie-Xin; Wang, Dan; Zeng, Xiao-Fei; Clarke, Stuart M; Chen, Jian-Feng

    2018-07-27

    Transparent dispersions of inorganic nanoparticles are attractive materials in many fields. However, a facile method for preparing such dispersions of aluminium hydroxide nanoparticles is yet to be realized. Here, we report a direct reactive method to prepare transparent dispersions of pseudo-boehmite nanoparticles (1 wt%) without any surface modification, and with an average particle size of 80 nm in length and 10 nm in width, as well as excellent optical transparency over 94% in the visible range. Furthermore, transparent dispersions of boehmite nanoparticles (1.5 wt%) were also achieved after an additional hydrothermal treatment. However, the optical transparency of dispersions decreased with the rise of hydrothermal temperature and the shape of particles changed from rhombs to hexagons. In particular, monodisperse hexagonal boehmite nanoplates with an average lateral size of 58 nm and a thickness of 12.5 nm were obtained at a hydrothermal temperature of 220 °C. The selectivity of crystal growth direction was speculated as the possible formation mechanism of these as-prepared aluminium hydroxide nanoparticles. Besides, two values of 19.6 wt% and 14.64 wt% were separately measured for the weight loss of pseudo-boehmite and boehmite nanoparticles after a continuous heating, indicating their potential flame-resistant applications in the fabrication of plastic electronics and optical devices with high transparency.

  10. 45 CFR 155.1040 - Transparency in coverage.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ....1040 Public Welfare Department of Health and Human Services REQUIREMENTS RELATING TO HEALTH CARE ACCESS... Functions: Certification of Qualified Health Plans § 155.1040 Transparency in coverage. (a) General requirement. The Exchange must collect information relating to coverage transparency as described in § 156.220...

  11. 45 CFR 155.1040 - Transparency in coverage.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ....1040 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS... Functions: Certification of Qualified Health Plans § 155.1040 Transparency in coverage. (a) General requirement. The Exchange must collect information relating to coverage transparency as described in § 156.220...

  12. Promoting Improved Ballistic Resistance of Transparent Armor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wereszczak, Andrew A; Patel, P; Templeton, D W

    2011-01-01

    Transparent armor is a material or system of materials designed to be optically transparent, yet protect from fragmentation or ballistic impacts. Although engineered to defeat specific threats, or a range of threats, there are general requirements common to all of these designs. The primary requirement for a transparent armor system is to not only defeat the designated threat but also provide a multi-hit capability with minimized distortion of surrounding areas. Ground platforms have several parameters that must be optimized, such as weight, space efficiency, and cost versus performance. Glass exhibits tensile failure stress that is very much dependent on themore » amount of material being stressed, the side being tensile-stressed (i.e., air-versus tin-side if a float glass), and where it is being tensile stressed (i.e., in the middle or near an edge). An axiom arising from those effects is a greater amount of allowable deflection (i.e., higher failure stress) of a ballistically impacted transparent armor will result in improved ballistic resistance. Therefore, the interpretation and management of those tensile-failure-stress dependencies shall ultimately improve ballistic resistance and its predictability of transparent armor. Each of those three dependencies (size, side, and location) in a soda-lime silicate glass is described.« less

  13. Medical regulation, spectacular transparency and the blame business.

    PubMed

    McGivern, Gerry; Fischer, Michael

    2010-01-01

    The purpose of this paper is to explore general practitioners' (GPs') and psychiatrists' views and experiences of transparent forms of medical regulation in practice, as well as those of medical regulators and those representing patients and professionals. The research included interviews with GPs, psychiatrists and others involved in medical regulation, representing patients and professionals. A qualitative narrative analysis of the interviews was then conducted. Narratives suggest rising levels of complaints, legalisation and blame within the National Health Service (NHS). Three key themes emerge. First, doctors feel "guilty until proven innocent" within increasingly legalised regulatory systems and are consequently practising more defensively. Second, regulation is described as providing "spectacular transparency", driven by political responses to high profile scandals rather than its effects in practice, which can be seen as a social defence. Finally, it is suggested that a "blame business" is driving this form of transparency, in which self-interested regulators, the media, lawyers, and even some patient organisations are fuelling transparency in a wider culture of blame. A relatively small number of people were interviewed, so further research testing the findings would be useful. Transparency has some perverse effects on doctors' practice. Rising levels of blame has perverse consequences for patient care, as doctors are practicing more defensively as a result, as well as significant financial implications for NHS funding. Transparent forms of regulation are assumed to be beneficial and yet little research has examined its effects in practice. In this paper we highlight a number of perverse effects of transparency in practice.

  14. Variable-transparency wall regulates temperatures of structures

    NASA Technical Reports Server (NTRS)

    Osullivan, W. J., Jr.

    1964-01-01

    An effective temperature regulating wall consists of one layer /e.g., one of the paraffins/ relatively opaque to thermal radiation in the solid state and transparent to it in the molten state and placed between two transparent layers. A mirror coating is applied to back layer.

  15. Topographic Map and Compass Use. A Teaching Packet to Supplement the Student Manual.

    ERIC Educational Resources Information Center

    Taylor, Michael

    This teacher's manual is designed to supplement the student manual for a unit of study on topographic map and compass use. The beginning section of the manual discusses (1) teaching strategy and evaluation, (2) teaching time and facilities, (3) materials and equipment required, (4) suggested field experience, (5) setting up a compass competition,…

  16. Copper Nanowires as Fully Transparent Conductive Electrodes

    PubMed Central

    Guo, Huizhang; Lin, Na; Chen, Yuanzhi; Wang, Zhenwei; Xie, Qingshui; Zheng, Tongchang; Gao, Na; Li, Shuping; Kang, Junyong; Cai, Duanjun; Peng, Dong-Liang

    2013-01-01

    In pondering of new promising transparent conductors to replace the cost rising tin-doped indium oxide (ITO), metal nanowires have been widely concerned. Herein, we demonstrate an approach for successful synthesis of long and fine Cu nanowires (NWs) through a novel catalytic scheme involving nickel ions. Such Cu NWs in high aspect ratio (diameter of 16.2 ± 2 nm and length up to 40 μm) provide long distance for electron transport and, meanwhile, large space for light transmission. Transparent electrodes fabricated using the Cu NW ink achieve a low sheet resistance of 1.4 Ohm/sq at 14% transmittance and a high transparency of 93.1% at 51.5 Ohm/sq. The flexibility and stability were tested with 100-timebending by 180°and no resistance change occurred. Ohmic contact was achieved to the p- and n-GaN on blue light emitting diode chip and bright electroluminescence from the front face confirmed the excellent transparency. PMID:23900572

  17. Transparent and Flexible Supercapacitors with Networked Electrodes.

    PubMed

    Kiruthika, S; Sow, Chaitali; Kulkarni, G U

    2017-10-01

    Transparent and flexible energy storage devices have received immense attention due to their suitability for innovative electronics and displays. However, it remains a great challenge to fabricate devices with high storage capacity and high degree of transmittance. This study describes a simple process for fabrication of supercapacitors with ≈75% of visible transparency and areal capacitance of ≈3 mF cm -2 with high stability tested over 5000 cycles of charging and discharging. The electrodes consist of Au wire networks obtained by a simple crackle template method which are coated with MnO 2 nanostructures by electrodeposition process. Importantly, the membrane separator itself is employed as substrate to bring in the desired transparency and light weight while additionally exploiting its porous nature in enhancing the interaction of electrolyte with the active material from both sides of the substrate, thereby enhancing the storage capacity. The method opens up new ways for fabricating transparent devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. [Transparency in public health decision-making].

    PubMed

    García-Altés, Anna; Argimon, Josep M

    2016-11-01

    Improving the quality and transparency of governmental healthcare decision-making has an impact on the health of the population through policies, organisational management and clinical practice. Moreover, the comparison between healthcare centres and the transparent feedback of results to professionals and to the wider public contribute directly to improved results. The "Results Centre" of the Catalan healthcare system measures and disseminates the results achieved by the different healthcare centres in order to facilitate a shared decision-making process, thereby enhancing the quality of healthcare provided to the population of Catalonia (Spain). This is a pioneering initiative in Spain and is aligned with the most advanced countries in terms of policies of transparency and accountability. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  19. Semantic transparency affects morphological priming . . . eventually.

    PubMed

    Heyer, Vera; Kornishova, Dana

    2018-05-01

    Semantic transparency has been in the focus of psycholinguistic research for decades, with the controversy about the time course of the application of morpho-semantic information during the processing of morphologically complex words not yet resolved. This study reports two masked priming studies with English - ness and Russian - ost' nominalisations, investigating how semantic transparency modulates native speakers' morphological priming effects at short and long stimulus onset asynchronies (SOAs). In both languages, we found increased morphological priming for nominalisations at the transparent end of the scale (e.g. paleness - pale) in comparison to items at the opaque end of the scale (e.g. business - busy) but only at longer prime durations. The present findings are in line with models that posit an initial phase of morpho-orthographic (semantically blind) decomposition.

  20. Restoration of Corneal Transparency by Mesenchymal Stem Cells.

    PubMed

    Mittal, Sharad K; Omoto, Masahiro; Amouzegar, Afsaneh; Sahu, Anuradha; Rezazadeh, Alexandra; Katikireddy, Kishore R; Shah, Dhvanit I; Sahu, Srikant K; Chauhan, Sunil K

    2016-10-11

    Transparency of the cornea is indispensable for optimal vision. Ocular trauma is a leading cause of corneal opacity, leading to 25 million cases of blindness annually. Recently, mesenchymal stem cells (MSCs) have gained prominence due to their inflammation-suppressing and tissue repair functions. Here, we investigate the potential of MSCs to restore corneal transparency following ocular injury. Using an in vivo mouse model of ocular injury, we report that MSCs have the capacity to restore corneal transparency by secreting high levels of hepatocyte growth factor (HGF). Interestingly, our data also show that HGF alone can restore corneal transparency, an observation that has translational implications for the development of HGF-based therapy. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  1. Development and applications of transparent conductive nanocellulose paper

    NASA Astrophysics Data System (ADS)

    Li, Shaohui; Lee, Pooi See

    2017-12-01

    Increasing attention has been paid to the next generation of 'green' electronic devices based on renewable nanocellulose, owing to its low roughness, good thermal stability and excellent optical properties. Various proof-of-concept transparent nanopaper-based electronic devices have been fabricated; these devices exhibit excellent flexibility, bendability and even foldability. In this review, we summarize the recent progress of transparent nanopaper that uses different types of nanocellulose, including pure nanocellulose paper and composite nanocellulose paper. The latest development of transparent and flexible nanopaper electronic devices are illustrated, such as electrochromic devices, touch sensors, solar cells and transistors. Finally, we discuss the advantages of transparent nanopaper compared to conventional flexible plastic substrate and the existing challenges to be tackled in order to realize this promising potential.

  2. Home Economics Supplement to the Consumer Education Curriculum Guide for Ohio, Grades K-12.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Vocational Home Economics.

    Written by 90 vocational home economics teachers during the consumer education workshops held at three Ohio institutions: Ashland College, Bowling Green University, and Miami University, the material included in the supplement is to be used in combination with the Consumer Education Guide for Ohio, Grades K-12. The learning experiences are…

  3. Transparent conducting oxides and production thereof

    DOEpatents

    Gessert, Timothy A; Yoshida, Yuki; Coutts, Timothy J

    2014-05-27

    Transparent conducting oxides and production thereof are disclosed. An exemplary method of producing a transparent conducting oxide (TCO) material may comprise: providing a TCO target (110) doped with either a high-permittivity oxide or a low-permittivity oxide in a process chamber (100). The method may also comprise depositing a metal oxide on the target (110) to form a thin film having enhanced optical properties without substantially decreasing electrical quality.

  4. Transparent conducting oxides and production thereof

    DOEpatents

    Gessert, Timothy A.; Yoshida, Yuki; Coutts, Timothy J.

    2014-06-10

    Transparent conducting oxides and production thereof are disclosed. An exemplary method of producing a transparent conducting oxide (TCO) material may comprise: providing a TCO target doped with either a high-permittivity oxide or a low-permittivity oxide in a process chamber. The method may also comprise depositing a metal oxide on the target in the process chamber to form a thin film having enhanced optical properties without substantially decreasing electrical quality.

  5. Tunable phonon-induced transparency in bilayer graphene nanoribbons.

    PubMed

    Yan, Hugen; Low, Tony; Guinea, Francisco; Xia, Fengnian; Avouris, Phaedon

    2014-08-13

    In the phenomenon of plasmon-induced transparency, which is a classical analogue of electromagnetically induced transparency (EIT) in atomic gases, the coherent interference between two plasmon modes results in an optical transparency window in a broad absorption spectrum. With the requirement of contrasting lifetimes, typically one of the plasmon modes involved is a dark mode that has limited coupling to the electromagnetic radiation and possesses relatively longer lifetime. Plasmon-induced transparency not only leads to light transmission at otherwise opaque frequency regions but also results in the slowing of light group velocity and enhanced optical nonlinearity. In this article, we report an analogous behavior, denoted as phonon-induced transparency (PIT), in AB-stacked bilayer graphene nanoribbons. Here, light absorption due to the plasmon excitation is suppressed in a narrow window due to the coupling with the infrared active Γ-point optical phonon, whose function here is similar to that of the dark plasmon mode in the plasmon-induced transparency. We further show that PIT in bilayer graphene is actively tunable by electrostatic gating and estimate a maximum slow light factor of around 500 at the phonon frequency of 1580 cm(-1), based on the measured spectra. Our demonstration opens an avenue for the exploration of few-photon nonlinear optics and slow light in this novel two-dimensional material.

  6. Transparent, Flexible, Conformal Capacitive Pressure Sensors with Nanoparticles.

    PubMed

    Kim, Hyeohn; Kim, Gwangmook; Kim, Taehoon; Lee, Sangwoo; Kang, Donyoung; Hwang, Min-Soo; Chae, Youngcheol; Kang, Shinill; Lee, Hyungsuk; Park, Hong-Gyu; Shim, Wooyoung

    2018-02-01

    The fundamental challenge in designing transparent pressure sensors is the ideal combination of high optical transparency and high pressure sensitivity. Satisfying these competing demands is commonly achieved by a compromise between the transparency and usage of a patterned dielectric surface, which increases pressure sensitivity, but decreases transparency. Herein, a design strategy for fabricating high-transparency and high-sensitivity capacitive pressure sensors is proposed, which relies on the multiple states of nanoparticle dispersity resulting in enhanced surface roughness and light transmittance. We utilize two nanoparticle dispersion states on a surface: (i) homogeneous dispersion, where each nanoparticle (≈500 nm) with a size comparable to the visible light wavelength has low light scattering; and (ii) heterogeneous dispersion, where aggregated nanoparticles form a micrometer-sized feature, increasing pressure sensitivity. This approach is experimentally verified using a nanoparticle-dispersed polymer composite, which has high pressure sensitivity (1.0 kPa -1 ), and demonstrates excellent transparency (>95%). We demonstrate that the integration of nanoparticle-dispersed capacitor elements into an array readily yields a real-time pressure monitoring application and a fully functional touch device capable of acting as a pressure sensor-based input device, thereby opening up new avenues to establish processing techniques that are effective on the nanoscale yet applicable to macroscopic processing. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Space-Derived Transparency: Players, Policies, Implications, and Synergies

    NASA Astrophysics Data System (ADS)

    Kinnan, C. J.

    2001-06-01

    Space-derived transparency will become a common means of monitoring, preventing, and mitigating crises, verifying compliance with treaties and law, and enabling confidence and security building measures. Democratization and globalization, the proliferation of information technologies, the availability of commercial space high-resolution imagery, and the growing influence of NGOs invite this question: What is (space-derived) transparency and what effect does it have on US security policy? Three camps have emerged in the debate -Horaeists who seek to build a transnational society through complete transparency; Preservationists, mostly military, who fear the threat to national security, want to deny most space-derived information to non-traditional/non-state actors; and Synergists who seek to capitalize on the best of both camps. There is evidence suggesting that space-derived transparency is an inevitable trend and will resist even the best means of preservationist control. Space-derived transparency may change the dynamic of the security environment by introducing new players into the policy fomentation and implementation process. These players, if not properly schooled in imagery analysis or the potential effects of their use of misinterpreted space-derived imagery, could force policy makers to make fast, ill-considered decisions in order to respond to incidents. In some cases this fast response will defuse potential crises and in other situations these rushed decisions might result in policies without considering the potential consequences, which could turn incidents into crises. Space-derived transparency is a step forward into the future for each camp . . . the challenge for the United States lies in forging synergies in an increasingly transparent world while maintaining the balance between openness and security.

  8. 2009 Annual Health Physics Report for the HEU Transparency Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Radev, R

    2010-04-14

    During the 2009 calendar year, Lawrence Livermore National Laboratory (LLNL) provided health physics support for the Highly Enriched Uranium (HEU) Transparency Program for external and internal radiation protection. LLNL also provided technical expertise related to BDMS radioactive sources and Russian radiation safety regulatory compliance. For the calendar year 2009, there were 159 person-trips that required dose monitoring of the U.S. monitors. Of the 159 person-trips, 149 person-trips were SMVs and 10 person-trips were Transparency Monitoring Office (TMO) trips. There were 4 monitoring visits by TMO monitors to facilities other than UEIE and 10 to UEIE itself. LLNL's Hazard Control Departmentmore » laboratories provided the dosimetry services for the HEU Transparency monitors. In 2009, the HEU Transparency activities in Russia were conducted in a radiologically safe manner for the HEU Transparency monitors in accordance with the expectations of the HEU Transparency staff, NNSA and DOE. The HEU Transparency Program now has over fifteen years of successful experience in developing and providing health and safety support in meeting its technical objectives.« less

  9. Transparency and Its Determinants at Colombian Universities

    ERIC Educational Resources Information Center

    Flórez-Parra, Jesús Mauricio; López-Pérez, María Victoria; López-Hernández, Antonio Manuel

    2017-01-01

    Over the past decade, one of the demands upon public institutions, among which we find universities, has been for transparency and improvement of accountability. In this context, Colombian universities are introducing different methods of management and governance aimed at addressing the demands of society generally in relation to transparency and…

  10. Law: The Language of Liberty. Supplemental Materials for Alabama Social Studies Teachers. Grade 11.

    ERIC Educational Resources Information Center

    Alabama Administrative Office of Courts, Montgomery.

    Student activities, teacher background information, and lesson ideas for teaching about law in social studies classrooms are presented. The first section provides students with a worksheet for determining the dates and historical significance of 15 great events (or documents) in U.S. history. A teacher resource list matches each event to pages in…

  11. Basic self-knowledge and transparency.

    PubMed

    Borgoni, Cristina

    2018-01-01

    Cogito -like judgments, a term coined by Burge (1988), comprise thoughts such as, I am now thinking , I [hereby] judge that Los Angeles is at the same latitude as North Africa, or I [hereby] intend to go to the opera tonight. It is widely accepted that we form cogito -like judgments in an authoritative and not merely empirical manner. We have privileged self-knowledge of the mental state that is self-ascribed in a cogito -like judgment. Thus, models of self-knowledge that aim to explain privileged self-knowledge should have the resources to explain the special self-knowledge involved in cogito judgments. My objective in this paper is to examine whether a transparency model of self-knowledge (i.e., models based on Evans ' 1982 remarks) can provide such an explanation: granted that cogito judgments are paradigmatic cases of privileged self-knowledge, does the transparency procedure explain why this is so? The paper advances a negative answer, arguing that the transparency procedure cannot generate the type of thought constitutive of cogito judgments.

  12. Supporting teachers and children in schools: the effectiveness and cost-effectiveness of the incredible years teacher classroom management programme in primary school children: a cluster randomised controlled trial, with parallel economic and process evaluations

    PubMed Central

    2012-01-01

    Background Childhood antisocial behaviour has high immediate and long-term costs for society and the individual, particularly in relation to mental health and behaviours that jeopardise health. Managing challenging behaviour is a commonly reported source of stress and burn out among teachers, ultimately resulting in a substantial number leaving the profession. Interventions to improve parenting do not transfer easily to classroom-based problems and the most vulnerable parents may not be easily able to access them. Honing teachers’ skills in proactive behaviour management and the promotion of socio-emotional regulation, therefore, has the potential to improve both child and teacher mental health and well-being and the advantage that it might potentially benefit all the children subsequently taught by any teacher that accesses the training. Methods/Design Cluster randomised controlled trial (RCT) of the Incredible Years teacher classroom management (TCM) course with combined economic and process evaluations. One teacher of children aged 4–9 years, from 80 schools in the South West Peninsula will be randomised to attend the TCM (intervention arm) or to “teach as normal” (control arm). The primary outcome measure will be the total difficulties score from the Strengths and Difficulties Questionnaire (SDQ) completed by the current class teachers prior to randomisation, and at 9, 18 and 30 months follow-up, supplemented by parent SDQs. Secondary measures include academic attainment (teacher report supplemented by direct measurement in a sub-sample), children’s enjoyment of school, and teacher reports of their professional self-efficacy, and levels of burn out and stress, supplemented by structured observations of teachers classroom management skills in a subsample. Cost data for the economic evaluation will be based on parental reports of services accessed. Cost-effectiveness, using the SDQ as the measure of effect, will be examined over the period of the

  13. Dipole-Induced Electromagnetic Transparency

    NASA Astrophysics Data System (ADS)

    Puthumpally-Joseph, Raiju; Sukharev, Maxim; Atabek, Osman; Charron, Eric

    2014-10-01

    We determine the optical response of a thin and dense layer of interacting quantum emitters. We show that, in such a dense system, the Lorentz redshift and the associated interaction broadening can be used to control the transmission and reflection spectra. In the presence of overlapping resonances, a dipole-induced electromagnetic transparency (DIET) regime, similar to electromagnetically induced transparency (EIT), may be achieved. DIET relies on destructive interference between the electromagnetic waves emitted by quantum emitters. Carefully tuning material parameters allows us to achieve narrow transmission windows in, otherwise, completely opaque media. We analyze in detail this coherent and collective effect using a generalized Lorentz model and show how it can be controlled. Several potential applications of the phenomenon, such as slow light, are proposed.

  14. Development and applications of transparent conductive nanocellulose paper

    PubMed Central

    Li, Shaohui; Lee, Pooi See

    2017-01-01

    Abstract Increasing attention has been paid to the next generation of ‘green’ electronic devices based on renewable nanocellulose, owing to its low roughness, good thermal stability and excellent optical properties. Various proof-of-concept transparent nanopaper-based electronic devices have been fabricated; these devices exhibit excellent flexibility, bendability and even foldability. In this review, we summarize the recent progress of transparent nanopaper that uses different types of nanocellulose, including pure nanocellulose paper and composite nanocellulose paper. The latest development of transparent and flexible nanopaper electronic devices are illustrated, such as electrochromic devices, touch sensors, solar cells and transistors. Finally, we discuss the advantages of transparent nanopaper compared to conventional flexible plastic substrate and the existing challenges to be tackled in order to realize this promising potential. PMID:28970870

  15. Transparent Information Systems through Gateways, Front Ends, Intermediaries, and Interfaces.

    ERIC Educational Resources Information Center

    Williams, Martha E.

    1986-01-01

    Provides overview of design requirements for transparent information retrieval (implies that user sees through complexity of retrieval activities sequence). Highlights include need for transparent systems; history of transparent retrieval research; information retrieval functions (automated converters, routers, selectors, evaluators/analyzers);…

  16. Cross-Cultural Study of Special Education Teachers' Perception of Iconicity of Graphic Symbols for Emotions

    ERIC Educational Resources Information Center

    Chae, Soo Jung

    2011-01-01

    This study was to investigate whether there are differences in perception of the symbols representing six emotions between the Korean and the American teachers. For an accurate comparison, two transparency tasks (Task 1-1 and Task 2) and one translucency task (Task 3) were used to investigate differences between Korean and American special…

  17. Lessons on the Constitution. Supplements to High School Courses in American History, Government and Civics.

    ERIC Educational Resources Information Center

    Patrick, John J.; Remy, Richard C.

    These curriculum materials about various aspects of the United States Constitution are designed as supplements to high school courses in history, civics, and government. They include 60 original lessons for students, accompanied by lesson plans for teachers, and are divided into five chapters. Chapter I, "Documents of Freedom" includes…

  18. P-type transparent conducting oxides.

    PubMed

    Zhang, Kelvin H L; Xi, Kai; Blamire, Mark G; Egdell, Russell G

    2016-09-28

    Transparent conducting oxides constitute a unique class of materials combining properties of electrical conductivity and optical transparency in a single material. They are needed for a wide range of applications including solar cells, flat panel displays, touch screens, light emitting diodes and transparent electronics. Most of the commercially available TCOs are n-type, such as Sn doped In2O3, Al doped ZnO, and F doped SnO2. However, the development of efficient p-type TCOs remains an outstanding challenge. This challenge is thought to be due to the localized nature of the O 2p derived valence band which leads to difficulty in introducing shallow acceptors and large hole effective masses. In 1997 Hosono and co-workers (1997 Nature 389 939) proposed the concept of 'chemical modulation of the valence band' to mitigate this problem using hybridization of O 2p orbitals with close-shell Cu 3d (10) orbitals. This work has sparked tremendous interest in designing p-TCO materials together with deep understanding the underlying materials physics. In this article, we will provide a comprehensive review on traditional and recently emergent p-TCOs, including Cu(+)-based delafossites, layered oxychalcogenides, nd (6) spinel oxides, Cr(3+)-based oxides (3d (3)) and post-transition metal oxides with lone pair state (ns (2)). We will focus our discussions on the basic materials physics of these materials in terms of electronic structures, doping and defect properties for p-type conductivity and optical properties. Device applications based on p-TCOs for transparent p-n junctions will also be briefly discussed.

  19. Graphene, microscale metallic mesh, and transparent dielectric hybrid structure for excellent transparent electromagnetic interference shielding and absorbing

    NASA Astrophysics Data System (ADS)

    Lu, Zhengang; Ma, Limin; Tan, Jiubin; Wang, Heyan; Ding, Xuemei

    2017-06-01

    A high-performance transparent electromagnetic interference (EMI) shielding material based on a graphene/metallic mesh/transparent dielectric (GMTD) hybrid structure is designed and characterized. It consists of stacked graphene and metallic mesh layers, with neighboring layers separated by a quartz-glass substrsate. The GMTD hybrid structure combines the microwave-reflecting characteristics of the metallic mesh and the microwave-absorbing characteristics of graphene to achieve simultaneously high visible transmittance, strong microwave shielding effectiveness (SE), and low microwave reflection. Experiments show that a double-graphene and double-metallic mesh GMTD hybrid structure with a mesh periodicity of 160 µm provides microwave SE exceeding 47.79 dB in the K u-band, and an SE exceeding 32.12 dB in the K a-band, with a maximum value of 37.78 dB at 26.5 GHz. SE by absorption exceeds 30.78 dB in the K a-band, with a maximum value of 34.55 dB at 26.5 GHz, while maintaining a normalized visible transmittance of ~85% at 700 nm. This remarkable performance favors the application of the proposed structure as a transparent microwave shield and absorber, and offers a new strategy for transparent EMI shielding.

  20. Transparency in the ePortfolio Creation Process

    ERIC Educational Resources Information Center

    Jones, Stephanie A.; Downs, Elizabeth; Jenkins, Stephen J.

    2015-01-01

    This paper presents the findings of a study examining the effect of transparency on the ePortfolio creation process. The purpose of the study was to examine whether increased awareness of other students' ePortfolios through the implementation of transparency and peer review would positively affect the quality of performance of school library media…

  1. Teacher's Guide to Accompany Living Latin: A Contemporary Approach.

    ERIC Educational Resources Information Center

    Masciantonio, Rudolph

    This guide, designed to assist teachers in the classroom use of "Living Latin: A Contemporary Approach", emphasizes procedures to be followed in each chapter of Book One; special procedures for teaching the introduction and first chapter are treated separately. Use of the text as a supplement to Sweet's "Artes Latinae" is discussed. Appendixes…

  2. Plasmon-Induced Transparency Based on Triple Arc-Ring Resonators.

    PubMed

    Dong, Guang-Xi; Xie, Qin; Zhang, Qi; Wang, Ben-Xin; Huang, Wei-Qing

    2018-06-06

    This paper presents a plasmon-induced transparency (PIT) using an easy-fabricating metamaterial composed of three pieces of metallic arc-rings on top of a dielectric substrate. The transmission of the transparent peak of 1.32 THz reaches approximately 93%. The utilization of the coupled Lorentzian oscillator model and the distribution of electromagnetic fields together explain the cause of the transparent peak. The simulation results further demonstrate that the bandwidth of the transmission peak can be narrowed by changing the sizes of the arc-rings. Moreover, an on/off effect based on the transparent peak is discussed by introducing photosensitive silicon into the air gaps of the suggested metamaterial structure.

  3. Transparent conducting oxide nanotubes

    NASA Astrophysics Data System (ADS)

    Alivov, Yahya; Singh, Vivek; Ding, Yuchen; Nagpal, Prashant

    2014-09-01

    Thin film or porous membranes made of hollow, transparent, conducting oxide (TCO) nanotubes, with high chemical stability, functionalized surfaces and large surface areas, can provide an excellent platform for a wide variety of nanostructured photovoltaic, photodetector, photoelectrochemical and photocatalytic devices. While large-bandgap oxide semiconductors offer transparency for incident light (below their nominal bandgap), their low carrier concentration and poor conductivity makes them unsuitable for charge conduction. Moreover, materials with high conductivity have nominally low bandgaps and hence poor light transmittance. Here, we demonstrate thin films and membranes made from TiO2 nanotubes heavily-doped with shallow Niobium (Nb) donors (up to 10%, without phase segregation), using a modified electrochemical anodization process, to fabricate transparent conducting hollow nanotubes. Temperature dependent current-voltage characteristics revealed that TiO2 TCO nanotubes, doped with 10% Nb, show metal-like behavior with resistivity decreasing from 6.5 × 10-4 Ωcm at T = 300 K (compared to 6.5 × 10-1 Ωcm for nominally undoped nanotubes) to 2.2 × 10-4 Ωcm at T = 20 K. Optical properties, studied by reflectance measurements, showed light transmittance up to 90%, within wavelength range 400 nm-1000 nm. Nb doping also improves the field emission properties of TCO nanotubes demonstrating an order of magnitude increase in field-emitter current, compared to undoped samples.

  4. Printable Transparent Conductive Films for Flexible Electronics.

    PubMed

    Li, Dongdong; Lai, Wen-Yong; Zhang, Yi-Zhou; Huang, Wei

    2018-03-01

    Printed electronics are an important enabling technology for the development of low-cost, large-area, and flexible optoelectronic devices. Transparent conductive films (TCFs) made from solution-processable transparent conductive materials, such as metal nanoparticles/nanowires, carbon nanotubes, graphene, and conductive polymers, can simultaneously exhibit high mechanical flexibility, low cost, and better photoelectric properties compared to the commonly used sputtered indium-tin-oxide-based TCFs, and are thus receiving great attention. This Review summarizes recent advances of large-area flexible TCFs enabled by several roll-to-roll-compatible printed techniques including inkjet printing, screen printing, offset printing, and gravure printing using the emerging transparent conductive materials. The preparation of TCFs including ink formulation, substrate treatment, patterning, and postprocessing, and their potential applications in solar cells, organic light-emitting diodes, and touch panels are discussed in detail. The rational combination of a variety of printed techniques with emerging transparent conductive materials is believed to extend the opportunities for the development of printed electronics within the realm of flexible electronics and beyond. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Linear and nonlinear transparencies in binocular vision.

    PubMed Central

    Langley, K; Fleet, D J; Hibbard, P B

    1998-01-01

    When the product of a vertical square-wave grating (contrast envelope) and a horizontal sinusoidal grating (carrier) are viewed binocularly with different disparity cues they can be perceived transparently at different depths. We found, however, that the transparency was asymmetric; it only occurred when the envelope was perceived to be the overlaying surface. When the same two signals were added, the percept of transparency was symmetrical; either signal could be seen in front of or behind the other at different depths. Differences between these multiplicative and additive signal combinations were examined in two experiments. In one, we measured disparity thresholds for transparency as a function of the spatial frequency of the envelope. In the other, we measured disparity discrimination thresholds. In both experiments the thresholds for the multiplicative condition, unlike the additive condition, showed distinct minima at low envelope frequencies. The different sensitivity curves found for multiplicative and additive signal combinations suggest that different processes mediated the disparity signal. The data are consistent with a two-channel model of binocular matching, with multiple depth cues represented at single retinal locations. PMID:9802240

  6. Transparent and stretchable high-performance supercapacitors based on wrinkled graphene electrodes.

    PubMed

    Chen, Tao; Xue, Yuhua; Roy, Ajit K; Dai, Liming

    2014-01-28

    Transparent and/or stretchable energy storage devices have attracted intense attention due to their unique optical and/or mechanical properties as well as their intrinsic energy storage function. However, it remains a great challenge to integrate transparent and stretchable properties into an energy storage device because the currently developed electrodes are either transparent or stretchable, but not both. Herein, we report a simple method to fabricate wrinkled graphene with high stretchability and transparency. The resultant wrinkled graphene sheets were used as both current collector and electrode materials to develop transparent and stretchable supercapacitors, which showed a high transparency (57% at 550 nm) and can be stretched up to 40% strain without obvious performance change over hundreds of stretching cycles.

  7. Criterion-free measurement of motion transparency perception at different speeds

    PubMed Central

    Rocchi, Francesca; Ledgeway, Timothy; Webb, Ben S.

    2018-01-01

    Transparency perception often occurs when objects within the visual scene partially occlude each other or move at the same time, at different velocities across the same spatial region. Although transparent motion perception has been extensively studied, we still do not understand how the distribution of velocities within a visual scene contribute to transparent perception. Here we use a novel psychophysical procedure to characterize the distribution of velocities in a scene that give rise to transparent motion perception. To prevent participants from adopting a subjective decision criterion when discriminating transparent motion, we used an “odd-one-out,” three-alternative forced-choice procedure. Two intervals contained the standard—a random-dot-kinematogram with dot speeds or directions sampled from a uniform distribution. The other interval contained the comparison—speeds or directions sampled from a distribution with the same range as the standard, but with a notch of different widths removed. Our results suggest that transparent motion perception is driven primarily by relatively slow speeds, and does not emerge when only very fast speeds are present within a visual scene. Transparent perception of moving surfaces is modulated by stimulus-based characteristics, such as the separation between the means of the overlapping distributions or the range of speeds presented within an image. Our work illustrates the utility of using objective, forced-choice methods to reveal the mechanisms underlying motion transparency perception. PMID:29614154

  8. Transparent Solar Concentrator for Flat Panel Display

    NASA Astrophysics Data System (ADS)

    Yeh, Chia-Hung; Chang, Fuh-Yu; Young, Hong-Tsu; Hsieh, Tsung-Yen; Chang, Chia-Hsiung

    2012-06-01

    A new concept of the transparent solar concentrator for flat panel display is experimentally demonstrated without adversely affecting the visual effects. The solar concentrator is based on a solar light-guide plate with micro prisms, not only increasing the absorption area of solar energy but also enhancing the conversion efficiency. The incident light is guided by the designed solar light-guide plate according to the total internal reflection (TIR), and converted into electrical power by photovoltaic solar cells. The designed transparent solar concentrator was made and measured with high transparency, namely 94.8%. The developed solar energy system for display can store energy and supply the bias voltage to light on two light-emitting diodes (LEDs) successfully.

  9. Transparent and durable superhydrophobic coatings for anti-bioadhesion.

    PubMed

    Zhao, Xia; Yu, Bo; Zhang, Junping

    2017-09-01

    Although thousands of superhydrophobic coatings have been reported, transparent ones with high durability are rare. Here, transparent and durable superhydrophobic coatings were prepared by using multiwalled carbon nanotubes (MWCNTs) as the templates. The superhydrophobic coatings were prepared by spray-coating the homogeneous suspension of polysiloxane-modified MWCNTs (MWCNTs@POS) in toluene onto glass slides, calcination in air at 500°C to form the silica nanotubes (SNTs), and then chemical vapor deposition of polydimethylsiloxane at 200°C onto the surface of the SNTs coatings. The MWCNTs@POS suspension was prepared by hydrolytic condensation of hexadecyltrimethoxysilane and tetraethoxysilane on the surface of MWCNTs. The coatings showed excellent superhydrophobicity (water contact angle=166.6°, sliding angle=1°) and high transparency (83.1% at 600nm). In addition, the transparent superhydrophobic coatings featured high mechanical, chemical and thermal durability. The coatings retained the excellent superhydrophobicity after intensive water jetting at 100kPa for 60min, immersion in various corrosive liquids for 24h, or kept at 390°C for 1h. Moreover, the transparent and durable superhydrophobic coatings exhibited very good anti-bioadhesive properties. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Making structured metals transparent for ultrabroadband electromagnetic waves and acoustic waves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fan, Ren-Hao; Peng, Ru-Wen, E-mail: rwpeng@nju.edu.cn; Huang, Xian-Rong

    2015-07-15

    In this review, we present our recent work on making structured metals transparent for broadband electromagnetic waves and acoustic waves via excitation of surface waves. First, we theoretically show that one-dimensional metallic gratings can become transparent and completely antireflective for extremely broadband electromagnetic waves by relying on surface plasmons or spoof surface plasmons. Second, we experimentally demonstrate that metallic gratings with narrow slits are highly transparent for broadband terahertz waves at oblique incidence and high transmission efficiency is insensitive to the metal thickness. Further, we significantly develop oblique metal gratings transparent for broadband electromagnetic waves (including optical waves and terahertzmore » ones) under normal incidence. In the third, we find the principles of broadband transparency for structured metals can be extended from one-dimensional metallic gratings to two-dimensional cases. Moreover, similar phenomena are found in sonic artificially metallic structures, which present the transparency for broadband acoustic waves. These investigations provide guidelines to develop many novel materials and devices, such as transparent conducting panels, antireflective solar cells, and other broadband metamaterials and stealth technologies. - Highlights: • Making structured metals transparent for ultrabroadband electromagnetic waves. • Non-resonant excitation of surface plasmons or spoof surface plasmons. • Sonic artificially metallic structures transparent for broadband acoustic waves.« less

  11. 2011 Annual Health Physics Report for the HEU transparency Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Radev, R

    2012-04-30

    During the 2008 calendar year, Lawrence Livermore National Laboratory (LLNL) provided health physics support for the Highly Enriched Uranium (HEU) Transparency Program for external and internal radiation protection. They also provided technical expertise related to BDMS radioactive sources and Russian radiation safety regulatory compliance. For the calendar year 2008, there were 158 person-trips that required dose monitoring of the U.S. monitors. Of the 158 person-trips, 148 person-trips were SMVs and 10 person-trips were Transparency Monitoring Office (TMO) trips. There were 6 monitoring visits by TMO monitors to facilities other than UEIE and 8 to UEIE itself. There were three monitoringmore » visits (source changes) that were back-to-back with a total of 24 monitors. LLNL's Hazard Control Department laboratories provided the dosimetry services for the HEU Transparency monitors. In 2008, the HEU Transparency activities in Russia were conducted in a radiologically safe manner for the HEU Transparency monitors in accordance with the expectations of the HEU Transparency staff, NNSA and DOE. The HEU Transparency now has thirteen years of successful experience in developing and providing health and safety support in meeting its technical objectives.« less

  12. 2008 Annual Health Physics Report for the HEU Transparency Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Radev, R.

    2009-03-24

    During the 2008 calendar year, Lawrence Livermore National Laboratory (LLNL) provided health physics support for the Highly Enriched Uranium (HEU) Transparency Program for external and internal radiation protection. They also provided technical expertise related to BDMS radioactive sources and Russian radiation safety regulatory compliance. For the calendar year 2008, there were 158 person-trips that required dose monitoring of the U.S. monitors. Of the 158 person-trips, 148 person-trips were SMVs and 10 person-trips were Transparency Monitoring Office (TMO) trips. There were 6 monitoring visits by TMO monitors to facilities other than UEIE and 8 to UEIE itself. There were three monitoringmore » visits (source changes) that were back-to-back with a total of 24 monitors. LLNL’s Hazard Control Department laboratories provided the dosimetry services for the HEU Transparency monitors. In 2008, the HEU Transparency activities in Russia were conducted in a radiologically safe manner for the HEU Transparency monitors in accordance with the expectations of the HEU Transparency staff, NNSA and DOE. The HEU Transparency now has thirteen years of successful experience in developing and providing health and safety support in meeting its technical objectives.« less

  13. Tunable Transmission-Line Metamaterials Mimicking Electromagnetically Induced Transparency

    NASA Astrophysics Data System (ADS)

    Feng, T. H.; Han, H. P.

    2016-11-01

    Tunable transmission-line (TL) metamaterials mimicking electromagnetically induced transparency (EIT) have been studied. Firstly, two types of tunable TL EIT-like metamaterial, based on the double split-ring resonator (DSRR) and single split-ring resonator (SSRR), were fabricated and their transmission properties carefully compared. The results showed that the transmittance maximum was almost invariable with shift of the transparency window for the tunable DSRR-based TL EIT-like metamaterial, but for the tunable SSRR-based TL EIT-like metamaterial, the transmittance maximum gradually diminished with shift of the transparency window toward the center of the absorption band. Moreover, the reason for these different transmission properties was explored, revealing that the reduction of the transmittance maximum of the transparency window for the tunable SSRR-based TL EIT-like metamaterial is mainly due to energy loss caused by the resistance of the loaded varactor diodes.

  14. SCDC Spanish Curricula Units. Science/Math Strand, Unit 6, Grade 2, Supplement & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    The supplement and ditto packet to the science-math strand of unit six for second graders features visual materials to help the teacher carry out the instructional and assessment activities for the unit's four kits. Illustrations are provided to help stimulate oral language and conceptual development. Some are designed to be cut out for…

  15. SCDC Spanish Curricula Units. Language Arts Strand, Unit 9, Grade 3, Supplement & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    Two readers, supplementary illustrations, and a ditto pack constitute this supplement to unit nine's language arts for third graders. Visual aids and materials for both seatwork for students and for class activities are presented; the teacher's guide to the unit provides the timetable for presentation. Kits 33 and 34 are based on the reader…

  16. NOVA: Spring 2003 Teacher's Guide. Battle of the X-Planes.

    ERIC Educational Resources Information Center

    WGBH Educational Foundation, Boston, MA.

    This teacher's guide contains supplemental activities to go along with the NOVA television program on PBS. Activities include: (1) "Last Flight of Bomber 31"; (2) "Ancient Creature of the Deep"; (3) "Battle of the X-Planes"; (4) "Mountain of Ice"; (5) "Lost Treasures of Tibet"; and (6)…

  17. Intermediate SCDC Spanish Curricula Units. Social Science, Unit 1, Kits 1-4, Supplement & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    Designed for use with the teacher's guide to the intermediate social science unit, the supplement and ditto packet provides visual aids and worksheets for class activities and seatwork for individual students. Visual materials are provided to help stimulate oral language and conceptual development. The worksheets are to be presented under…

  18. The Value of Transparency in Distributed Solar PV Markets | Solar Research

    Science.gov Websites

    | NREL The Value of Transparency in Distributed Solar PV Markets The Value of Transparency in Distributed Solar PV Markets NREL research analyzes data from a U.S. quote aggregator to study the effects of transparency on distributed solar photovoltaic (PV) markets. The study shows lower prices in more transparent

  19. Ultrasmooth, extremely deformable and shape recoverable Ag nanowire embedded transparent electrode

    PubMed Central

    Nam, Sanggil; Song, Myungkwan; Kim, Dong-Ho; Cho, Byungjin; Lee, Hye Moon; Kwon, Jung-Dae; Park, Sung-Gyu; Nam, Kee-Seok; Jeong, Yongsoo; Kwon, Se-Hun; Park, Yun Chang; Jin, Sung-Ho; Kang, Jae-Wook; Jo, Sungjin; Kim, Chang Su

    2014-01-01

    Transparent electrodes have been widely used in electronic devices such as solar cells, displays, and touch screens. Highly flexible transparent electrodes are especially desired for the development of next generation flexible electronic devices. Although indium tin oxide (ITO) is the most commonly used material for the fabrication of transparent electrodes, its brittleness and growing cost limit its utility for flexible electronic devices. Therefore, the need for new transparent conductive materials with superior mechanical properties is clear and urgent. Ag nanowire (AgNW) has been attracting increasing attention because of its effective combination of electrical and optical properties. However, it still suffers from several drawbacks, including large surface roughness, instability against oxidation and moisture, and poor adhesion to substrates. These issues need to be addressed before wide spread use of metallic NW as transparent electrodes can be realized. In this study, we demonstrated the fabrication of a flexible transparent electrode with superior mechanical, electrical and optical properties by embedding a AgNW film into a transparent polymer matrix. This technique can produce electrodes with an ultrasmooth and extremely deformable transparent electrode that have sheet resistance and transmittance comparable to those of an ITO electrode. PMID:24763248

  20. Ultrasmooth, extremely deformable and shape recoverable Ag nanowire embedded transparent electrode.

    PubMed

    Nam, Sanggil; Song, Myungkwan; Kim, Dong-Ho; Cho, Byungjin; Lee, Hye Moon; Kwon, Jung-Dae; Park, Sung-Gyu; Nam, Kee-Seok; Jeong, Yongsoo; Kwon, Se-Hun; Park, Yun Chang; Jin, Sung-Ho; Kang, Jae-Wook; Jo, Sungjin; Kim, Chang Su

    2014-04-25

    Transparent electrodes have been widely used in electronic devices such as solar cells, displays, and touch screens. Highly flexible transparent electrodes are especially desired for the development of next generation flexible electronic devices. Although indium tin oxide (ITO) is the most commonly used material for the fabrication of transparent electrodes, its brittleness and growing cost limit its utility for flexible electronic devices. Therefore, the need for new transparent conductive materials with superior mechanical properties is clear and urgent. Ag nanowire (AgNW) has been attracting increasing attention because of its effective combination of electrical and optical properties. However, it still suffers from several drawbacks, including large surface roughness, instability against oxidation and moisture, and poor adhesion to substrates. These issues need to be addressed before wide spread use of metallic NW as transparent electrodes can be realized. In this study, we demonstrated the fabrication of a flexible transparent electrode with superior mechanical, electrical and optical properties by embedding a AgNW film into a transparent polymer matrix. This technique can produce electrodes with an ultrasmooth and extremely deformable transparent electrode that have sheet resistance and transmittance comparable to those of an ITO electrode.

  1. SCDC Spanish Curricula Units. Science/Math Strand, Unit 4, Grade 2, Supplements & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    Designed for use with unit four of the science/math strand for second graders, the supplement and ditto packet contain visuals, worksheets, and instructional aids referred to in the teacher's guide corresponding to this unit. The brief introductions to kits 13-16 are written in both English and Spanish; all classroom materials for students are in…

  2. SCDC Spanish Curricula Units. Fine Arts Strand, Unit 9, Grade 3, Supplement & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    The supplement and ditto packet to the fine arts strand of unit nine for third graders contains illustrations, ditto masters, and four songbooks to help the teacher carry out the fine arts activities of this unit. Materials for both group activities and seatwork are included. Kit 33 uses the songbook "Canciones de Aqui y de Alla" and…

  3. Stress Wave and Damage Propagation in Transparent Laminates at Elevated Temperatures

    DTIC Science & Technology

    2010-03-01

    materials like Starphire (a registered trademark of PPG Industries, Pittsburgh, PA) soda - lime glass , borosilicate glass , fused silica , and the...in transparent armor materials like Starphire soda - lime glass , borosilicate glass , fused silica , and the transparent ceramic AlON.1 Since...transparent ceramic AlON. Since transparent armor consists of glass laminates with polymer interlayer and backing, the influence of interlayer type and

  4. Basic materials physics of transparent conducting oxides.

    PubMed

    Edwards, P P; Porch, A; Jones, M O; Morgan, D V; Perks, R M

    2004-10-07

    Materials displaying the remarkable combination of high electrical conductivity and optical transparency already from the basis of many important technological applications, including flat panel displays, solar energy capture and other opto-electronic devices. Here we present the basic materials physics of these important materials centred on the nature of the doping process to generate n-type conductivity in transparent conducting oxides, the associated transition to the metallic (conducting) state and the detailed properties of the degenerate itinerant electron gas. The aim is to fully understand the origins of the basic performance limits of known materials and to set the scene for new or improved materials which will breach those limits for new-generation transparent conducting materials, either oxides, or beyond oxides.

  5. Federal Funding Accountability and Transparency Act frequently asked questions

    EPA Pesticide Factsheets

    One stop shop for Federal Funding Accountability and Transparency Act (FFATA) questions. This frequently asked document will assist with Federal Funding Accountability and Transparency Act (FFATA) related questions.

  6. Intermediate SCDC Spanish Curricula Units. Science/Health, Unit 1, Kits 1-4, Supplement & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    Visual aids and ditto masters for the first unit of a science/health curriculum for the intermediate level are included in this supplement and ditto packet. The visual aids are designed to help stimulate oral language and conceptual development through group activities and individual seatwork. Intended to help the teacher successfully carry out…

  7. Grayscale transparent metasurface holograms

    DOE PAGES

    Wang, Lei; Kruk, Sergey; Tang, Hanzhi; ...

    2016-12-16

    In this paper, we demonstrate transparent metaholograms based on silicon metasurfaces that allow high-resolution grayscale images to be encoded. Finally, the holograms feature the highest diffraction and transmission efficiencies, and operate over a broad spectral range.

  8. Complicating Methodological Transparency

    ERIC Educational Resources Information Center

    Bridges-Rhoads, Sarah; Van Cleave, Jessica; Hughes, Hilary E.

    2016-01-01

    A historical indicator of the quality, validity, and rigor of qualitative research has been the documentation and disclosure of the behind-the-scenes work of the researcher. In this paper, we use what we call "methodological data" as a tool to complicate the possibility and desirability of such transparency. Specifically, we draw on our…

  9. Classroom Teacher's "Idea" Notebook. Social Education, 1984, Supplements No. 34-36.

    ERIC Educational Resources Information Center

    Campanella, Alfred J., Ed.

    1984-01-01

    A compilation of nine social studies activities suitable for immediate application in the classroom includes teaching ideas for middle school, secondary school, and college teachers. Activities include the use of (1) geographic skills to understand the use of solar radiation and available wind power, (2) questions to help students understand…

  10. FROM UNDERGRADUATE STUDENT TO PROFESSIONAL TEACHER. AN ASSESSMENT OF THE NDEA INSTITUTES FOR UNDERGRADUATES PREPARING TO BECOME ELEMENTARY OR SECONDARY TEACHERS OF MODERN FOREIGN LANGUAGES.

    ERIC Educational Resources Information Center

    AXELROD, JOSEPH

    A STUDY WAS MADE OF SEVEN NDEA INSTITUTES, GIVEN IN THE SUMMERS OF 1965 AND 1966 FOR UNDERGRADUATES PREPARING TO BE FOREIGN LANGUAGE TEACHERS, TO DETERMINE IF THESE INSTITUTES ARE AN EFFECTIVE SUPPLEMENT TO COLLEGE LANGUAGE PROGRAMS. INFORMATION SOURCES FOR THE STUDY WERE INSTITUTE DIRECTORS AND THEIR STAFF, VISITORS' OBSERVATIONS, AND…

  11. A reinterpretation of transparency perception in terms of gamut relativity.

    PubMed

    Vladusich, Tony

    2013-03-01

    Classical approaches to transparency perception assume that transparency constitutes a perceptual dimension corresponding to the physical dimension of transmittance. Here I present an alternative theory, termed gamut relativity, that naturally explains key aspects of transparency perception. Rather than being computed as values along a perceptual dimension corresponding to transmittance, gamut relativity postulates that transparency is built directly into the fabric of the visual system's representation of surface color. The theory, originally developed to explain properties of brightness and lightness perception, proposes how the relativity of the achromatic color gamut in a perceptual blackness-whiteness space underlies the representation of foreground and background surface layers. Whereas brightness and lightness perception were previously reanalyzed in terms of the relativity of the achromatic color gamut with respect to illumination level, transparency perception is here reinterpreted in terms of relativity with respect to physical transmittance. The relativity of the achromatic color gamut thus emerges as a fundamental computational principle underlying surface perception. A duality theorem relates the definition of transparency provided in gamut relativity with the classical definition underlying the physical blending models of computer graphics.

  12. Silver nanowire-based transparent, flexible, and conductive thin film

    PubMed Central

    2011-01-01

    The fabrication of transparent, conductive, and uniform silver nanowire films using the scalable rod-coating technique is described in this study. Properties of the transparent conductive thin films are investigated, as well as the approaches to improve the performance of transparent silver nanowire electrodes. It is found that silver nanowires are oxidized during the coating process. Incubation in hydrogen chloride (HCl) vapor can eliminate oxidized surface, and consequently, reduce largely the resistivity of silver nanowire thin films. After HCl treatment, 175 Ω/sq and approximately 75% transmittance are achieved. The sheet resistivity drops remarkably with the rise of the film thickness or with the decrease of transparency. The thin film electrodes also demonstrated excellent flexible stability, showing < 2% resistance change after over 100 bending cycles. PMID:21711602

  13. Highly transparent supercapacitors based on ZnO/MnO2 nanostructures.

    PubMed

    Borysiewicz, M A; Ekielski, M; Ogorzałek, Z; Wzorek, M; Kaczmarski, J; Wojciechowski, T

    2017-06-08

    The recent rapid development of transparent electronics, notably displays and control circuits, requires the development of highly transparent energy storage devices, such as supercapacitors. The devices reported to date utilize carbon-based electrodes for high performance, however at the cost of their low transparency around 50%, insufficient for real transparent devices. To overcome this obstacle, in this communication highly transparent supercapacitors were fabricated based on ZnO/MnO 2 nanostructured electrodes. ZnO served as an intrinsically transparent skeleton for increasing the electrode surface, while MnO 2 nanoparticles were applied for high capacitance. Two MnO 2 synthesis routes were followed, based on the reaction of KMnO 4 with Mn(Ac) 2 and PAH, leading to the synthesis of β-MnO 2 with minority α-MnO 2 nanoparticles and amorphous MnO 2 with embedded β-MnO 2 , respectively. The devices based on such electrodes showed high capacitances of 2.6 mF cm -2 and 1.6 mF cm -2 , respectively, at a scan rate of 1 mV s -1 and capacitances of 104 μF cm -2 and 204 μF cm -2 at a very high rate of 1 V s -1 , not studied for transparent supercapacitors previously. Additionally, the Mn(Ac) 2 devices exhibited very high transparencies of 86% vs. air, far superior to other transparent energy storage devices reported with similar charge storage properties. This high device performance was achieved with a non-acidic LiCl gel electrolyte, reducing corrosion and handling risks associated with conventional highly concentrated acidic electrolytes, enabling applications in safe, wearable, transparent devices.

  14. 78 FR 57409 - U.S. Extractive Industries Transparency Initiative Public Outreach

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-18

    .... Extractive Industries Transparency Initiative Public Outreach AGENCY: Office of the Secretary, Interior... Industries Transparency Initiative (USEITI) candidacy application. By this notice, Interior is providing the...' commitment to participate in the Extractive Industries Transparency Initiative. EITI is a signature...

  15. Water transparency drives intra-population divergence in Eurasian Perch (Perca fluviatilis).

    PubMed

    Bartels, Pia; Hirsch, Philipp E; Svanbäck, Richard; Eklöv, Peter

    2012-01-01

    Trait combinations that lead to a higher efficiency in resource utilization are important drivers of divergent natural selection and adaptive radiation. However, variation in environmental features might constrain foraging in complex ways and therefore impede the exploitation of critical resources. We tested the effect of water transparency on intra-population divergence in morphology of Eurasian perch (Perca fluviatilis) across seven lakes in central Sweden. Morphological divergence between near-shore littoral and open-water pelagic perch substantially increased with increasing water transparency. Reliance on littoral resources increased strongly with increasing water transparency in littoral populations, whereas littoral reliance was not affected by water transparency in pelagic populations. Despite the similar reliance on pelagic resources in pelagic populations along the water transparency gradient, the utilization of particular pelagic prey items differed with variation in water transparency in pelagic populations. Pelagic perch utilized cladocerans in lakes with high water transparency and copepods in lakes with low water transparency. We suggest that under impaired visual conditions low utilization of littoral resources by littoral perch and utilization of evasive copepods by pelagic perch may lead to changes in morphology. Our findings indicate that visual conditions can affect population divergence in predator populations through their effects on resource utilization.

  16. Water Transparency Drives Intra-Population Divergence in Eurasian Perch (Perca fluviatilis)

    PubMed Central

    Bartels, Pia; Hirsch, Philipp E.; Svanbäck, Richard; Eklöv, Peter

    2012-01-01

    Trait combinations that lead to a higher efficiency in resource utilization are important drivers of divergent natural selection and adaptive radiation. However, variation in environmental features might constrain foraging in complex ways and therefore impede the exploitation of critical resources. We tested the effect of water transparency on intra-population divergence in morphology of Eurasian perch (Perca fluviatilis) across seven lakes in central Sweden. Morphological divergence between near-shore littoral and open-water pelagic perch substantially increased with increasing water transparency. Reliance on littoral resources increased strongly with increasing water transparency in littoral populations, whereas littoral reliance was not affected by water transparency in pelagic populations. Despite the similar reliance on pelagic resources in pelagic populations along the water transparency gradient, the utilization of particular pelagic prey items differed with variation in water transparency in pelagic populations. Pelagic perch utilized cladocerans in lakes with high water transparency and copepods in lakes with low water transparency. We suggest that under impaired visual conditions low utilization of littoral resources by littoral perch and utilization of evasive copepods by pelagic perch may lead to changes in morphology. Our findings indicate that visual conditions can affect population divergence in predator populations through their effects on resource utilization. PMID:22912895

  17. Making structured metals transparent for ultrabroadband electromagnetic waves and acoustic waves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fan, Ren-Hao; Peng, Ru-Wen; Huang, Xian-Rong

    2015-07-01

    In this review, we present our recent work on making structured metals transparent for broadband electromagnetic waves and acoustic waves via excitation of surface waves. First, we theoretically show that one-dimensional metallic gratings can become transparent and completely antireflective for extremely broadband electromagnetic waves by relying on surface plasmons or spoof surface plasmons. Second, we experimentally demonstrate that metallic gratings with narrow slits are highly transparent for broadband terahertz waves at oblique incidence and high transmission efficiency is insensitive to the metal thickness. Further, we significantly develop oblique metal gratings transparent for broadband electromagnetic waves (including optical waves and terahertzmore » ones) under normal incidence. In the third, we find the principles of broadband transparency for structured metals can be extended from one-dimensional metallic gratings to two-dimensional cases. Moreover, similar phenomena are found in sonic artificially metallic structures, which present the transparency for broadband acoustic waves. These investigations provide guidelines to develop many novel materials and devices, such as transparent conducting panels, antireflective solar cells, and other broadband metamaterials and stealth technologies.« less

  18. Law: The Language of Liberty. Supplemental Materials for Alabama Social Studies Teachers. Grades 5-6.

    ERIC Educational Resources Information Center

    Alabama Administrative Office of Courts, Montgomery.

    Student activity pages, teacher background information, and lesson ideas for teaching about the law in social studies classrooms are provided in this supplementary packet. An introductory section provides a rationale for the unit, a guide to bringing law-related resource persons into the classroom, a teacher checklist for helping resource persons…

  19. Fabrication of transparent ceramics using nanoparticles

    DOEpatents

    Cherepy, Nerine J; Tillotson, Thomas M; Kuntz, Joshua D; Payne, Stephen A

    2012-09-18

    A method of fabrication of a transparent ceramic using nanoparticles synthesized via organic acid complexation-combustion includes providing metal salts, dissolving said metal salts to produce an aqueous salt solution, adding an organic chelating agent to produce a complexed-metal sol, heating said complexed-metal sol to produce a gel, drying said gel to produce a powder, combusting said powder to produce nano-particles, calcining said nano-particles to produce oxide nano-particles, forming said oxide nano-particles into a green body, and sintering said green body to produce the transparent ceramic.

  20. Tailoring mode interference in plasmon-induced transparency metamaterials

    NASA Astrophysics Data System (ADS)

    Liu, Meng; Yang, Quanlong; Xu, Quan; Chen, Xieyu; Tian, Zhen; Gu, Jianqiang; Ouyang, Chunmei; Zhang, Xueqian; Han, Jiaguang; Zhang, Weili

    2018-05-01

    We proposed an approach to tailor the mode interference effect in plasmon-induced transparency (PIT) metamaterials. Through introducing an extra coupling mode using an asymmetric structure configuration at terahertz (THz) frequencies, the well-known single-transparency-window PIT can be switched to dual-transparency-window PIT. Proof-of-concept subwavelength structures were fabricated and experimentally characterized. The measured results are in good agreement with the simulations, and well support our theoretical analysis. The presented research delivers a novel approach toward developing subwavelength devices with varies functionalities, such as ultra-slow group velocities, longitudinal pulse compression and light storage in the THz regime, which can also be extended to other spectral regimes.

  1. Digital Thickness Measurement of a Transparent Plastic Orthodontic Device

    NASA Astrophysics Data System (ADS)

    Kim, Yoon-Hwan; Rhim, Sung-Han

    2018-05-01

    A transparent orthodontic device is used to move the teeth to the final calibration position to form a proper set of teeth. Because the uniform thickness of the device plays an important role in tooth positioning, the accuracy of the device's thickness profile is important for effective orthodontic treatment. However, due to the complexity of the device's geometry and the transparency of the device's material, measuring the complete thickness profile has been difficult. In the present study, a new optical scanning method to measure the thickness profile of transparent plastic orthodontic devices is proposed and evaluated by using scanning electron microscopy (SEM). The error of the new measurement method is less than ±18 μm. The new method can be used to measure the thickness of non-specific, multi-curved, transparent orthodontic devices.

  2. Transparent conductors based on microscale/nanoscale materials for high performance devices

    NASA Astrophysics Data System (ADS)

    Gao, Tongchuan

    Transparent conductors are important as the top electrode for a variety of optoelectronic devices, including solar cells, light-emitting diodes (LEDs), at panel displays, and touch screens. Doped indium tin oxide (ITO) thin films are the predominant transparent conductor material. However, ITO thin films are brittle, making them unsuitable for the emerging flexible devices, and suffer from high material and processing cost. In my thesis, we developed a variety of transparent conductors toward a performance comparable with or superior to ITO thin films, with lower cost and potential for scalable manufacturing. Metal nanomesh (NM), hierarchical graphene/metal microgrid (MG), and hierarchical metal NM/MG materials were investigated. Simulation methods were used as a powerful tool to predict the transparency and sheet resistance of the transparent conductors by solving Maxwell's equations and Poisson's equation. Affordable and scalable fabrication processes were developed thereafter. Transparent conductors with over 90% transparency and less than 10 O/square sheet resistance were successfully fabricated on both rigid and flexible substrates. Durability tests, such as bending, heating and tape tests, were carried out to evaluate the robustness of the samples. Haze factor, which characterizes how blurry a transparent conductor appears, was also studied in-depth using analytical calculation and numerical simulation. We demonstrated a tunable haze factor for metal NM transparent conductors and analyzed the principle for tuning the haze factor. Plasmonic effects, excited by some transparent conductors, can lead to enhanced performance in photovoltaic devices. We systematically studied the effect of incorporating metal NM into ultrathin film silicon solar cells using numerical simulation, with the aid of optimization algorithms to reduce the optimization time. Mechanisms contributing to the enhanced performance were then identified and analyzed. Over 72% enhancement in short

  3. The Development of Professional Mobility of Teachers in Supplemental Education System

    ERIC Educational Resources Information Center

    Valeeva, Roza A.; Amirova, Lyudmila A.

    2016-01-01

    Actual continuity of the problems stated in this article caused by the fact that modern education is directed at the formation of a mobile person of the teacher, who is able to transform the educational reality and himself in accordance with the requirements of a developing society, and to provide not only high-quality mastering studying the…

  4. Contrast enhancement of transparencies

    NASA Technical Reports Server (NTRS)

    Shulman, A. R.; Lee, S. H.

    1976-01-01

    System can enhance or reduce contrast of photographic transparency for printing or projection by using constructive and destructive interference of collimated laser beam. System is potentially less expensive than electronic CRT methods and is more accurate than trial-and-error manual techniques.

  5. Designing and implementing transparency for real time inspection of autonomous robots

    NASA Astrophysics Data System (ADS)

    Theodorou, Andreas; Wortham, Robert H.; Bryson, Joanna J.

    2017-07-01

    The EPSRC's Principles of Robotics advises the implementation of transparency in robotic systems, however research related to AI transparency is in its infancy. This paper introduces the reader of the importance of having transparent inspection of intelligent agents and provides guidance for good practice when developing such agents. By considering and expanding upon other prominent definitions found in literature, we provide a robust definition of transparency as a mechanism to expose the decision-making of a robot. The paper continues by addressing potential design decisions developers need to consider when designing and developing transparent systems. Finally, we describe our new interactive intelligence editor, designed to visualise, develop and debug real-time intelligence.

  6. Moving from spatially segregated to transparent motion: a modelling approach

    PubMed Central

    Durant, Szonya; Donoso-Barrera, Alejandra; Tan, Sovira; Johnston, Alan

    2005-01-01

    Motion transparency, in which patterns of moving elements group together to give the impression of lacy overlapping surfaces, provides an important challenge to models of motion perception. It has been suggested that we perceive transparent motion when the shape of the velocity histogram of the stimulus is bimodal. To investigate this further, random-dot kinematogram motion sequences were created to simulate segregated (perceptually spatially separated) and transparent (perceptually overlapping) motion. The motion sequences were analysed using the multi-channel gradient model (McGM) to obtain the speed and direction at every pixel of each frame of the motion sequences. The velocity histograms obtained were found to be quantitatively similar and all were bimodal. However, the spatial and temporal properties of the velocity field differed between segregated and transparent stimuli. Transparent stimuli produced patches of rightward and leftward motion that varied in location over time. This demonstrates that we can successfully differentiate between these two types of motion on the basis of the time varying local velocity field. However, the percept of motion transparency cannot be based simply on the presence of a bimodal velocity histogram. PMID:17148338

  7. Highly transparent and flexible circuits through patterning silver nanowires into microfluidic channels.

    PubMed

    Sun, Jing; Zhou, Wenhui; Yang, Haibo; Zhen, Xue; Ma, Longfei; Williams, Dirk; Sun, Xudong; Lang, Ming-Fei

    2018-05-10

    The development of flexible and transparent devices requires completely transparent and flexible circuits (TFCs). To overcome the disadvantages of the previously reported TFCs that are partially transparent, lacking pattern control, or labor consuming, we achieve true TFCs via a facile process with precise pattern control, exhibiting concurrent high transparency, conductivity, flexibility, stretchability, and robustness. A highly transparent and flexible conductive film is first made through spin coating silver nanowires (AgNWs) onto polydimethylsiloxane (PDMS), and demonstrates simultaneous high transparency (90.86%) and low sheet resistance (3.22 Ω sq-1). Taking advantage of microfluidic technology, circuits with ultraprecise and complex patterns from the microscale to milliscale are obtained through spin coating of AgNWs into microfluidic channels on PDMS. Without elaborate processing, this method may be suitable for mass production, which would contribute enormously to potential applications in wearable medical equipment and transparent electronic devices.

  8. Transparent 3D display for augmented reality

    NASA Astrophysics Data System (ADS)

    Lee, Byoungho; Hong, Jisoo

    2012-11-01

    Two types of transparent three-dimensional display systems applicable for the augmented reality are demonstrated. One of them is a head-mounted-display-type implementation which utilizes the principle of the system adopting the concave floating lens to the virtual mode integral imaging. Such configuration has an advantage in that the threedimensional image can be displayed at sufficiently far distance resolving the accommodation conflict with the real world scene. Incorporating the convex half mirror, which shows a partial transparency, instead of the concave floating lens, makes it possible to implement the transparent three-dimensional display system. The other type is the projection-type implementation, which is more appropriate for the general use than the head-mounted-display-type implementation. Its imaging principle is based on the well-known reflection-type integral imaging. We realize the feature of transparent display by imposing the partial transparency to the array of concave mirror which is used for the screen of reflection-type integral imaging. Two types of configurations, relying on incoherent and coherent light sources, are both possible. For the incoherent configuration, we introduce the concave half mirror array, whereas the coherent one adopts the holographic optical element which replicates the functionality of the lenslet array. Though the projection-type implementation is beneficial than the head-mounted-display in principle, the present status of the technical advance of the spatial light modulator still does not provide the satisfactory visual quality of the displayed three-dimensional image. Hence we expect that the head-mounted-display-type and projection-type implementations will come up in the market in sequence.

  9. The health care value transparency movement and its implications for radiology.

    PubMed

    Durand, Daniel J; Narayan, Anand K; Rybicki, Frank J; Burleson, Judy; Nagy, Paul; McGinty, Geraldine; Duszak, Richard

    2015-01-01

    The US health care system is in the midst of disruptive changes intended to expand access, improve outcomes, and lower costs. As part of this movement, a growing number of stakeholders have advocated dramatically increasing consumer transparency into the quality and price of health care services. The authors review the general movement toward American health care value transparency within the public, private, and nonprofit sectors, with an emphasis on those initiatives most relevant to radiology. They conclude that radiology, along with other "ancillary services," has been a major focus of early efforts to enhance consumer price transparency. By contrast, radiology as a field remains in the "middle of the pack" with regard to quality transparency. There is thus the danger that radiology value transparency in its current form will stimulate primarily price-based competition, erode provider profit margins, and disincentivize quality. The authors conclude with suggested actions radiologists can take to ensure that a more optimal balance is struck between quality transparency and price transparency, one that will enable true value-based competition among radiologists rather than commoditization. Copyright © 2015 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  10. Venture Philanthropy and Teacher Education Policy in the U.S: The Role of the New Schools Venture Fund

    ERIC Educational Resources Information Center

    Zeichner, Kenneth; Peña-Sandoval, César

    2015-01-01

    Background & Purpose: This article focuses on the growing role of venture philanthropy in shaping policy and practice in teacher education in the United States. Our goal is to bring a greater level of transparency to private influences on public policy and to promote greater discussion and debate in the public arena about alternative solutions…

  11. Transparency and public involvement in animal research.

    PubMed

    Pound, Pandora; Blaug, Ricardo

    2016-05-01

    To be legitimate, research needs to be ethical, methodologically sound, of sufficient value to justify public expenditure and be transparent. Animal research has always been contested on ethical grounds, but there is now mounting evidence of poor scientific method, and growing doubts about its clinical value. So what of transparency? Here we examine the increasing focus on openness within animal research in the UK, analysing recent developments within the Home Office and within the main group representing the interests of the sector, Understanding Animal Research. We argue that, while important steps are being taken toward greater transparency, the legitimacy of animal research continues to be undermined by selective openness. We propose that openness could be increased through public involvement, and that this would bring about much needed improvements in animal research, as it has done in clinical research. 2016 FRAME.

  12. Accuracy versus transparency in pharmacoeconomic modelling: finding the right balance.

    PubMed

    Eddy, David M

    2006-01-01

    As modellers push to make their models more accurate, the ability of others to understand the models can decrease, causing the models to lose transparency. When this type of conflict between accuracy and transparency occurs, the question arises, "Where do we want to operate on that spectrum?" This paper argues that in such cases we should give absolute priority to accuracy: push for whatever degree of accuracy is needed to answer the question being asked, try to maximise transparency within that constraint, and find other ways to replace what we wanted to get from transparency. There are several reasons. The fundamental purpose of a model is to help us get the right answer to a question and, by any measure, the expected value of a model is proportional to its accuracy. Ironically, we use transparency as a way to judge accuracy. But transparency is not a very powerful or useful way to do this. It rarely enables us to actually replicate the model's results and, even if we could, replication would not tell us the model's accuracy. Transparency rarely provides even face validity; from the content expert's perspective, the simplifications that modellers have to make usually raise more questions than they answer. Transparency does enable modellers to alert users to weaknesses in their models, but that can be achieved simply by listing the model's limitations and does not get us any closer to real accuracy. Sensitivity analysis tests the importance of uncertainty about the variables in a model, but does not tell us about the variables that were omitted or the structure of the model. What people really want to know is whether a model actually works. Transparency by itself can't answer this; only demonstrations that the model accurately calculates or predicts real events can. Rigorous simulations of clinical trials are a good place to start. This is the type of empirical validation we need to provide if the potential of mathematical models in pharmacoeconomics is to be

  13. Integrating Science and Language Arts: A Sourcebook for K-6 Teachers.

    ERIC Educational Resources Information Center

    Shaw, Donna Gail; Dybdahl, Claudia S.

    The purpose of this sourcebook is to provide elementary classroom teachers with meaningful ideas and activities for supplementing their science and language arts programs. Five general topics encompassing the earth, life, and physical science have been selected as units and further subdivided into chapters. Each chapter contains a multitude of…

  14. Teacher-Guided Interactive Multimedia for Teaching English in an EFL Context

    ERIC Educational Resources Information Center

    Tsai, Roland; Jenks, Michael

    2009-01-01

    This quasi-experimental study explored the effect of a "Teacher Guided Multimedia" CD-ROM program as a supplement in teaching vocabulary acquisition to EFL students. Eighty seven juniors in the Food and Beverage Management Department at Yuanpei University in northern Taiwan participated in the study. Students from two intact classes were…

  15. Strengthening Transparency in Regulatory Science

    EPA Pesticide Factsheets

    Where available and appropriate, EPA will use peer-reviewed information, standardized test methods, consistent data evaluation procedures, and good laboratory practices to ensure transparent, understandable, and reproducible scientific assessments.

  16. Farm Business Records and Financial Statements. Teacher Edition. Farm Business Management Series.

    ERIC Educational Resources Information Center

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    Contained in this teacher's guide are the materials necessary to teach seven instructional units related to keeping farm business records and preparing financial statements. The following instructional units are presented: (1) orientation; (2) inventories; (3) journal entry; (4) enterprise accounting and supplemental records; (5) cash flow…

  17. Introducing modern technology to promote transparency in health services.

    PubMed

    Islam, Mohammad Shafiqul

    2015-01-01

    Quantitative indicators show that Bangladeshi maternal and child healthcare is progressing satisfactorily. However, healthcare quality is still inadequate. It is hypothesised that modern technology enhances healthcare quality. Therefore, the purpose of this paper is to investigate how modern technology such as electronic record keeping and the internet can contribute to enhancing Bangladeshi healthcare quality. This study also explores how socio-economic and political factors affect the healthcare quality. This paper is based on a qualitative case study involving 68 in-depth interviews with healthcare professionals, elected representatives, local informants and five focus group discussions with healthcare service users to understand technology's effect on health service quality. The study has been conducted in one rural and one urban service organisations to understand how various factors contribute differently to healthcare quality. The findings show that modern technology, such as the internet and electronic devices for record keeping, contribute significantly to enhancing health service transparency, which in turn leads to quality health and family planning services. The findings also show that information and communication technology (ICT) is an effective mechanism for reducing corruption and promoting transparency. However, resource constraints impact adversely on the introduction of technology, which leads to less transparent healthcare. Progress in education and general socio-economic conditions makes it suitable to enhance ICT usage, which could lead to healthcare transparency, but political and bureaucratic factors pose a major challenge to ensure transparency. This paper can be a useful guide for promoting governance and healthcare quality in developing countries including Bangladesh. It analyses the ICT challenges that healthcare staff face when promoting transparent healthcare. This paper provides a deeper understanding of transparency and healthcare

  18. 20-micron transparency and atmospheric water vapor at the Wyoming Infrared Observatory

    NASA Technical Reports Server (NTRS)

    Grasdalen, G. L.; Gehrz, R. D.; Hackwell, J. A.; Freedman, R.

    1985-01-01

    The atmospheric transparency at 19.5 and 23 microns from the Wyoming Infrared Observatory over the past six years has been examined. It is found that the transparency is largely controlled by the season. Four months: June, July, August, and September have very poor 20-micron transparency. During the rest of the year the transparency is usually quite good at 19.5 microns and moderately good at 23 microns. Using rawinsonde data and theoretical calculations for the expected infrared transparency, the measures of 20-micron transparency were calibrated in terms of atmospheric water-vapor content. The water vapor over the Wyoming Infrared Observatory is found to compare favorably with that above other proposed or developed sites: Mauna Kea, Mount Graham, and Wheeler Peak.

  19. High quality transparent conducting oxide thin films

    DOEpatents

    Gessert, Timothy A.; Duenow, Joel N.; Barnes, Teresa; Coutts, Timothy J.

    2012-08-28

    A transparent conducting oxide (TCO) film comprising: a TCO layer, and dopants selected from the elements consisting of Vanadium, Molybdenum, Tantalum, Niobium, Antimony, Titanium, Zirconium, and Hafnium, wherein the elements are n-type dopants; and wherein the transparent conducting oxide is characterized by an improved electron mobility of about 42 cm.sup.2/V-sec while simultaneously maintaining a high carrier density of .about.4.4e.times.10.sup.20 cm.sup.-3.

  20. Transparent wood for functional and structural applications

    NASA Astrophysics Data System (ADS)

    Li, Yuanyuan; Fu, Qiliang; Yang, Xuan; Berglund, Lars

    2017-12-01

    Optically transparent wood combines mechanical performance with optical functionalities is an emerging candidate for applications in smart buildings and structural optics and photonics. The present review summarizes transparent wood preparation methods, optical and mechanical performance, and functionalization routes, and discusses potential applications. The various challenges are discussed for the purpose of improved performance, scaled-up production and realization of advanced applications. This article is part of a discussion meeting issue `New horizons for cellulose nanotechnology'.

  1. Nonperiodic metallic gratings transparent for broadband terahertz waves

    NASA Astrophysics Data System (ADS)

    Fan, Ren-Hao; Ren, Xiao-Ping; Peng, Ru-Wen; Huang, Xian-Rong; Wang, Mu

    Recently, we demonstrate both theoretically and experimentally that nonperiodic metallic gratings can become transparent for broadband terahertz waves. Quasiperiodic and disordered metallic gratings effectively weaken and even eliminate Wood's anomalies, which are the diffraction-related characters of periodic gratings. Consequently, both the transparence bandwidth and transmission efficiency are significantly increased due to the structural aperiodicity. Furthermore, we show that for a specific light source, for example, a line source, a corresponding nonperiodic transparent grating can be also designed. We expect that our findings can be applied for transparent conducting panels, perfect white-beam polarizers, antireflective conducting solar cells, and beyond. References: X. P. Ren, R. H. Fan, R. W. Peng, X. R. Huang, D. H. Xu, Y. Zhou, and Mu Wang, Physical Review B, 91, 045111 (2015); R. H. Fan, R. W. Peng, X. R. Huang, J. Li, Y. Liu, Q. Hu, Mu. Wang, and X. Zhang, Advanced Materials, 24, 1980 (2012); and X. R. Huang, R. W. Peng, and R. H. Fan. Physical Review Letters, 105, 243901 (2010).

  2. What is and what is not electromagnetically induced transparency in whispering-gallery microcavities.

    PubMed

    Peng, Bo; Özdemir, Sahin Kaya; Chen, Weijian; Nori, Franco; Yang, Lan

    2014-10-24

    There has been an increasing interest in all-optical analogues of electromagnetically induced transparency and Autler-Townes splitting. Despite the differences in their underlying physics, both electromagnetically induced transparency and Autler-Townes splitting are quantified by a transparency window in the absorption or transmission spectrum, which often leads to a confusion about its origin. While the transparency window in electromagnetically induced transparency is a result of Fano interference among different transition pathways, in Autler-Townes splitting it is the result of strong field-driven interactions leading to the splitting of energy levels. Being able to tell objectively whether an observed transparency window is because of electromagnetically induced transparency or Autler-Townes splitting is crucial for applications and for clarifying the physics involved. Here we demonstrate the pathways leading to electromagnetically induced transparency, Fano resonances and Autler-Townes splitting in coupled whispering-gallery-mode resonators. Moreover, we report the application of the Akaike Information Criterion discerning between all-optical analogues of electromagnetically induced transparency and Autler-Townes splitting and clarifying the transition between them.

  3. The transparency trap.

    PubMed

    Bernstein, Ethan

    2014-10-01

    To promote accountability, productivity, and shared learning, many organizations create open work environments and gather reams of data on how individuals spend their time. A few years ago, HBS professor Ethan Bernstein set out to find empirical evidence that such approaches improve organizational performance. What he discovered is that this kind of transparency often has an unintended consequence: It can leave employees feeling vulnerable and exposed. When that happens, they conceal any conduct that deviates from the norm so that they won't have to explain it. Unrehearsed, experimental behaviors sometimes stop altogether. But Bernstein also discovered organizations that had established zones of privacy within open environments by setting four types of boundaries: around teams, between feedback and evaluation, between decision rights and improvement rights, and around periods of experimentation. Moreover, across several studies, the companies that had done all this were the ones that consistently got the most creative, efficient, and thoughtful work from their employees. Bernstein's conclusion? By balancing transparency and privacy, organizations can capture the benefits of both, and encourage just the right amount of "positive deviance" needed to increase innovation and productivity.

  4. Flexible transparent electrode

    NASA Astrophysics Data System (ADS)

    Demiryont, Hulya; Shannon, Kenneth C., III; Moorehead, David; Bratcher, Matthew

    2011-06-01

    This paper presents the properties of the EclipseTECTM transparent conductor. EclipseTECTM is a room temperature deposited nanostructured thin film coating system comprised of metal-oxide semiconductor elements. The system possesses metal-like conductivity and glass-like transparency in the visible region. These highly conductive TEC films exhibit high shielding efficiency (35dB at 1 to 100GHz). EclipseTECTM can be deposited on rigid or flexible substrates. For example, EclipseTECTM deposited on polyethylene terephthalate (PET) is extremely flexible that can be rolled around a 9mm diameter cylinder with little or no reduction in electrical conductivity and that can assume pre-extension states after an applied stress is relieved. The TEC is colorless and has been tailored to have high visible transmittance which matches the eye sensitivity curve and allows the viewing of true background colors through the coating. EclipseTECTM is flexible, durable and can be tailored at the interface for applications such as electron- or hole-injecting OLED electrodes as well as electrodes in flexible displays. Tunable work function and optical design flexibility also make EclipseTECTM well-suited as a candidate for grid electrode replacement in next-generation photovoltaic cells.

  5. Highly efficient fully transparent inverted OLEDs

    NASA Astrophysics Data System (ADS)

    Meyer, J.; Winkler, T.; Hamwi, S.; Schmale, S.; Kröger, M.; Görrn, P.; Johannes, H.-H.; Riedl, T.; Lang, E.; Becker, D.; Dobbertin, T.; Kowalsky, W.

    2007-09-01

    One of the unique selling propositions of OLEDs is their potential to realize highly transparent devices over the visible spectrum. This is because organic semiconductors provide a large Stokes-Shift and low intrinsic absorption losses. Hence, new areas of applications for displays and ambient lighting become accessible, for instance, the integration of OLEDs into the windshield or the ceiling of automobiles. The main challenge in the realization of fully transparent devices is the deposition of the top electrode. ITO is commonly used as transparent bottom anode in a conventional OLED. To obtain uniform light emission over the entire viewing angle and a low series resistance, a TCO such as ITO is desirable as top contact as well. However, sputter deposition of ITO on top of organic layers causes damage induced by high energetic particles and UV radiation. We have found an efficient process to protect the organic layers against the ITO rf magnetron deposition process of ITO for an inverted OLED (IOLED). The inverted structure allows the integration of OLEDs in more powerful n-channel transistors used in active matrix backplanes. Employing the green electrophosphorescent material Ir(ppy) 3 lead to IOLED with a current efficiency of 50 cd/A and power efficiency of 24 lm/W at 100 cd/m2. The average transmittance exceeds 80 % in the visible region. The on-set voltage for light emission is lower than 3 V. In addition, by vertical stacking we achieved a very high current efficiency of more than 70 cd/A for transparent IOLED.

  6. Multimodal sensing strategies for detecting transparent barriers indoors from a mobile platform

    NASA Astrophysics Data System (ADS)

    Acevedo, Isaiah; Kleine, R. Kaleb; Kraus, Dustan; Mascareñas, David

    2015-04-01

    There is currently an interest in developing mobile sensing platforms that fly indoors. The primary goal for these platforms is to be able to successfully navigate a building under various lighting and environmental conditions. There are numerous research challenges associated with this goal, one of which is the platform's ability to detect and identify the presence of transparent barriers. Transparent barriers could include windows, glass partitions, or skylights. For example, in order to successfully navigate inside of a structure, these platforms will need to sense if a space contains a transparent barrier and whether or not this space can be traversed. This project's focus has been developing a multimodal sensing system that can successfully identify such transparent barriers under various lighting conditions while aboard a mobile platform. Along with detecting transparent barriers, this sensing platform is capable of distinguishing between reflective, opaque, and transparent barriers. It will be critical for this system to be able to identify transparent barriers in real-time in order for the navigation system to maneuver accordingly. The properties associated with the interaction between various frequencies of light and transparent materials were one of the techniques leveraged to solve this problem.

  7. On-chip plasmon-induced transparency based on plasmonic coupled nanocavities

    PubMed Central

    Zhu, Yu; Hu, Xiaoyong; Yang, Hong; Gong, Qihuang

    2014-01-01

    On-chip plasmon-induced transparency offers the possibility of realization of ultrahigh-speed information processing chips. Unfortunately, little experimental progress has been made to date because it is difficult to obtain on-chip plasmon-induced transparency using only a single meta-molecule in plasmonic circuits. Here, we report a simple and efficient strategy to realize on-chip plasmon-induced transparency in a nanoscale U-shaped plasmonic waveguide side-coupled nanocavity pair. High tunability in the transparency window is achieved by covering the pair with different organic polymer layers. It is possible to realize ultrafast all-optical tunability based on pump light-induced refractive index change of a graphene cover layer. Compared with previous reports, the overall feature size of the plasmonic nanostructure is reduced by more than three orders of magnitude, while ultrahigh tunability of the transparency window is maintained. This work also provides a superior platform for the study of the various physical effects and phenomena of nonlinear optics and quantum optics. PMID:24435059

  8. On-chip plasmon-induced transparency based on plasmonic coupled nanocavities.

    PubMed

    Zhu, Yu; Hu, Xiaoyong; Yang, Hong; Gong, Qihuang

    2014-01-17

    On-chip plasmon-induced transparency offers the possibility of realization of ultrahigh-speed information processing chips. Unfortunately, little experimental progress has been made to date because it is difficult to obtain on-chip plasmon-induced transparency using only a single meta-molecule in plasmonic circuits. Here, we report a simple and efficient strategy to realize on-chip plasmon-induced transparency in a nanoscale U-shaped plasmonic waveguide side-coupled nanocavity pair. High tunability in the transparency window is achieved by covering the pair with different organic polymer layers. It is possible to realize ultrafast all-optical tunability based on pump light-induced refractive index change of a graphene cover layer. Compared with previous reports, the overall feature size of the plasmonic nanostructure is reduced by more than three orders of magnitude, while ultrahigh tunability of the transparency window is maintained. This work also provides a superior platform for the study of the various physical effects and phenomena of nonlinear optics and quantum optics.

  9. All-dielectric resonant cavity-enabled metals with broadband optical transparency

    NASA Astrophysics Data System (ADS)

    Liu, Zhengqi; Zhang, Houjiao; Liu, Xiaoshan; Pan, Pingping; Liu, Yi; Tang, Li; Liu, Guiqiang

    2017-06-01

    Metal films with broadband optical transparency are desirable in many optoelectronic devices, such as displays, smart windows, light-emitting diodes and infrared detectors. As bare metal is opaque to light, this issue of transparency attracts great scientific interest. In this work, we proposed and demonstrated a feasible and universal approach for achieving broadband optical transparent (BOT) metals by utilizing all-dielectric resonant cavities. Resonant dielectrics provide optical cavity modes and couple strongly with the surface plasmons of the metal film, and therefore produce a broadband near-unity optical transparent window. The relative enhancement factor (EF) of light transmission exceeds 3400% in comparison with that of pure metal film. Moreover, the transparent metal motif can be realized by other common metals including gold (Au), silver (Ag) and copper (Cu). These optical features together with the fully retained electric and mechanical properties of a natural metal suggest that it will have wide applications in optoelectronic devices.

  10. Determinants of dietary supplement use--healthy individuals use dietary supplements.

    PubMed

    Kofoed, Christina L F; Christensen, Jane; Dragsted, Lars O; Tjønneland, Anne; Roswall, Nina

    2015-06-28

    The prevalence of dietary supplement use varies largely among populations, and previous studies have indicated that it is high in the Danish population compared with other European countries. The diversity in supplement use across countries indicates that cultural and environmental factors could influence the use of dietary supplements. Only few studies investigating the use of dietary supplements have been conducted in the Danish population. The present cross-sectional study is based on 54,948 Danes, aged 50-64 years, who completed self-administrated questionnaires on diet, dietary supplements and lifestyle between 1993 and 1997. A health index including smoking, physical activity, alcohol and diet, and a metabolic risk index including waist circumference, urinary glucose and measured hypertension were constructed. Logistic regression was used to investigate these determinants in relation to the intake of dietary supplements. We found that 71 % of the participants were dietary supplement users; female sex, older age groups and higher educated participants were more likely to be users of any dietary supplements. One additional point in the health index was associated with 19, 16 and 9 % higher likelihood of being user of any, more common and less common supplements, respectively. In the metabolic risk index, one additional point was associated with 17 and 16 % lower likelihood of being user of any supplement and more common supplements, respectively. No significant association was found for less common supplement use. In conclusion, those with the healthiest lifestyle were more likely to use dietary supplements. Thus, lifestyle and dietary composition should be considered as confounders on supplement use and health outcomes.

  11. Involvement: A Practical Handbook for Teachers on Law-Related Methodologies. Law Related Education Program for the Schools of Maryland. Secondary Level.

    ERIC Educational Resources Information Center

    Vetter, Donald P.; Paradis, Gerard W.

    The teacher's handbook provides goals, objectives, and teaching strategies helpful to secondary teachers in supplementing existing law-related curriculum materials in the social studies classroom. Intended as a means of actively involving students in a study of law, the first section presents 19 lesson plans and selected student resources for use…

  12. High carrier concentration p-type transparent conducting oxide films

    DOEpatents

    Yan, Yanfa; Zhang, Shengbai

    2005-06-21

    A p-type transparent conducting oxide film is provided which is consisting essentially of, the transparent conducting oxide and a molecular doping source, the oxide and doping source grown under conditions sufficient to deliver the doping source intact onto the oxide.

  13. The FOSTER Project: Teacher Enrichment Through Participation in NASA's Airborne Astronomy Program

    NASA Technical Reports Server (NTRS)

    Koch, David; Hull, G.; Gillespie, C., Jr.; DeVore, E.; Witteborn, Fred C. (Technical Monitor)

    1995-01-01

    NASA's airborne astronomy program offers a unique opportunity for K-12 science teacher enrichment and for NASA to reach out and serve the educational community. Learning from a combination of summer workshops, curriculum supplement materials, training in Internet skills and ultimately flying on NASA's C-141 airborne observatory, the teachers are able to share the excitement of scientific discovery with their students and convey that excitement from first hand experience rather than just from reading about science in a textbook. This year the program has expanded to include teachers from the eleven western states served by NASA Ames Research Center's Educational Programs Office as well as teachers from communities from around the country where the scientist who fly on the observatory reside. Through teacher workshops and inservice presentations, the FOSTER (Flight Opportunities for Science Teacher EnRichment) teachers are sharing the resources and experiences with many hundreds of other teachers. Ultimately, the students are learning first hand about the excitement of science, the scientific method in practice, the team work involved, the relevance of science to their daily lives and the importance of a firm foundation in math and science in today's technologically oriented world.

  14. Transparent Proxy for Secure E-Mail

    NASA Astrophysics Data System (ADS)

    Michalák, Juraj; Hudec, Ladislav

    2010-05-01

    The paper deals with the security of e-mail messages and e-mail server implementation by means of a transparent SMTP proxy. The security features include encryption and signing of transported messages. The goal is to design and implement a software proxy for secure e-mail including its monitoring, administration, encryption and signing keys administration. In particular, we focus on automatic public key on-the-fly encryption and signing of e-mail messages according to S/MIME standard by means of an embedded computer system whose function can be briefly described as a brouter with transparent SMTP proxy.

  15. Texas entry-year agriculture teachers' perceptions, practices, and preparation regarding safety and health in agricultural education.

    PubMed

    Hubert, D J; Ullrich, D R; Murphy, T H; Lindner, J R

    2001-08-01

    The purpose of this study was to gather benchmark data for the assessment of the knowledge, attitudes, and perceptions regarding agricultural safety issues and curricula held by Texas agricultural teachers with less than two full years of teaching experience (entry-year teachers). Seventy-four of 118 well-distributed teachers responded to this survey. Researchers concluded that more females were entering a traditionally male-dominated field. Overall, teachers addressed safety within units of instruction rather than as separate units. The most useful forms of new teaching resources that this group of teachers would like to see produced were safety videos and study guides, and class demonstration/simulation activities. There was a significant difference in rankings between teachers less than 26 years old and teachers more than 26 years old regarding the usefulness of transparencies as a new teaching resource (F = 5.00, p = 0.0268). Few teachers were currently CPR and first aid certified, even though most had received training and completed a general safety and/or health related course while in college. Teachers generally agreed philosophically with most practices and exhibited personal beliefs consistent with proper safety preparedness and practice in agricultural settings. However, many of these teachers failed to practice what was expected of safe tractor operators, such as wearing safety belts and allowing younger drivers to operate the equipment.

  16. Lattice Transparency of Graphene.

    PubMed

    Chae, Sieun; Jang, Seunghun; Choi, Won Jin; Kim, Youn Sang; Chang, Hyunju; Lee, Tae Il; Lee, Jeong-O

    2017-03-08

    Here, we demonstrated the transparency of graphene to the atomic arrangement of a substrate surface, i.e., the "lattice transparency" of graphene, by using hydrothermally grown ZnO nanorods as a model system. The growth behaviors of ZnO nanocrystals on graphene-coated and uncoated substrates with various crystal structures were investigated. The atomic arrangements of the nucleating ZnO nanocrystals exhibited a close match with those of the respective substrates despite the substrates being bound to the other side of the graphene. By using first-principles calculations based on density functional theory, we confirmed the energetic favorability of the nucleating phase following the atomic arrangement of the substrate even with the graphene layer present in between. In addition to transmitting information about the atomic lattice of the substrate, graphene also protected its surface. This dual role enabled the hydrothermal growth of ZnO nanorods on a Cu substrate, which otherwise dissolved in the reaction conditions when graphene was absent.

  17. Patients' views on price shopping and price transparency.

    PubMed

    Semigran, Hannah L; Gourevitch, Rebecca; Sinaiko, Anna D; Cowling, David; Mehrotra, Ateev

    2017-06-01

    Driven by the growth of high deductibles and price transparency initiatives, patients are being encouraged to search for prices before seeking care, yet few do so. To understand why this is the case, we interviewed individuals who were offered access to a widely used price transparency website through their employer. Qualitative interviews. We interviewed individuals enrolled in a preferred provider organization product through their health plan about their experience using the price transparency tool (if they had done so), their past medical experiences, and their opinions on shopping for care. All interviews were transcribed and manually coded using a thematic coding guide. In general, respondents expressed frustration with healthcare costs and had a positive opinion of the idea of price shopping in theory, but 2 sets of barriers limited their ability to do so in reality. The first was the salience of searching for price information. For example, respondents recognized that due to their health plan benefits design, they would not save money by switching to a lower-cost provider. Second, other factors were more important than price for respondents when choosing a provider, including quality and loyalty to current providers. We found a disconnect between respondents' enthusiasm for price shopping and their reported use of a price transparency tool to shop for care. However, many did find the tool useful for other purposes, including checking their claims history. Addressing the barriers to price shopping identified by respondents can help inform ongoing and future price transparency initiatives.

  18. Multidimensional Ranking: A New Transparency Tool for Higher Education and Research

    ERIC Educational Resources Information Center

    van Vught, Frans; Westerheijden, Don F.

    2010-01-01

    This paper sets out to analyse the need for better "transparency tools" which inform university stakeholders about the quality of universities. First, we give an overview of what we understand by the concept of transparency tools and those that are currently available. We then critique current transparency tools' methodologies, looking in detail…

  19. Diversified Professionalism of Physical Education Teachers in the Asian Context of Hong Kong

    ERIC Educational Resources Information Center

    Sum, Raymond Kim Wai; Dimmock, Clive

    2014-01-01

    This study investigates the socialization and professional experiences of primary school physical education teachers (PSPETs) in the Asian context of Hong Kong. A qualitative research design is adopted. The researcher used semi-structured interviews, supplemented by documentary sources (diaries) for conducting data collection. Eleven PSPETs…

  20. Especially for Teachers: Selected Documents on the Teaching of Science 1966-1981.

    ERIC Educational Resources Information Center

    Helgeson, Stanley, Comp.; And Others

    Designed to supplement the day-to-day planning, teaching, and evaluation activities of science teachers at all educational levels, this compilation contains over 900 resumes of practitioner-oriented documents announced in "Resources in Education" (RIE) between 1966 and 1981. The resumes are presented under these headings: (1) elementary…

  1. Projection type transparent 3D display using active screen

    NASA Astrophysics Data System (ADS)

    Kamoshita, Hiroki; Yendo, Tomohiro

    2015-05-01

    Equipment to enjoy a 3D image, such as a movie theater, television and so on have been developed many. So 3D video are widely known as a familiar image of technology now. The display representing the 3D image are there such as eyewear, naked-eye, the HMD-type, etc. They has been used for different applications and location. But have not been widely studied for the transparent 3D display. If transparent large 3D display is realized, it is useful to display 3D image overlaid on real scene in some applications such as road sign, shop window, screen in the conference room etc. As a previous study, to produce a transparent 3D display by using a special transparent screen and number of projectors is proposed. However, for smooth motion parallax, many projectors are required. In this paper, we propose a display that has transparency and large display area by time multiplexing projection image in time-division from one or small number of projectors to active screen. The active screen is composed of a number of vertically-long small rotate mirrors. It is possible to realize the stereoscopic viewing by changing the image of the projector in synchronism with the scanning of the beam.3D vision can be realized by light is scanned. Also, the display has transparency, because it is possible to see through the display when the mirror becomes perpendicular to the viewer. We confirmed the validity of the proposed method by using simulation.

  2. Process for forming transparent aerogel insulating arrays

    DOEpatents

    Tewari, Param H.; Hunt, Arlon J.

    1986-01-01

    An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO.sub.2, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO.sub.2, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40.degree. C. instead of at about 270.degree. C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementry particles or cosmic rays.

  3. Process for forming transparent aerogel insulating arrays

    DOEpatents

    Tewari, P.H.; Hunt, A.J.

    1985-09-04

    An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO/sub 2/, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO/sub 2/, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40/sup 0/C instead of at about 270/sup 0/C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementary particles or cosmic rays.

  4. Are the Most Prestigious Medical Journals Transparent Enough?

    PubMed

    Dal-Ré, Rafael

    2016-09-01

    The International Committee of Medical Journal Editors (ICMJE) has played a critical role in enhancing medical science reporting. Transparency in research is one of its most important objectives and the ICMJE has issued requirements for various stakeholders. However, ICMJE member journals have repeatedly failed to fully comply with a few transparency requirements. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. All-solution processed transparent organic light emitting diodes

    NASA Astrophysics Data System (ADS)

    Zhang, Min; Höfle, Stefan; Czolk, Jens; Mertens, Adrian; Colsmann, Alexander

    2015-11-01

    In this work, we report on indium tin oxide-free, all-solution processed transparent organic light emitting diodes (OLEDs) with inverted device architecture. Conductive polymer layers are employed as both transparent cathodes and transparent anodes, with the top anodes having enhanced conductivities from a supporting stochastic silver nanowire mesh. Both electrodes exhibit transmittances of 80-90% in the visible spectral regime. Upon the incorporation of either yellow- or blue-light emitting fluorescent polymers, the OLEDs show low onset voltages, demonstrating excellent charge carrier injection from the polymer electrodes into the emission layers. Overall luminances and current efficiencies equal the performance of opaque reference OLEDs with indium tin oxide and aluminium electrodes, proving excellent charge carrier-to-light conversion within the device.

  6. Friend or foe: exploiting sensor failures for transparent object localization and classification

    NASA Astrophysics Data System (ADS)

    Seib, Viktor; Barthen, Andreas; Marohn, Philipp; Paulus, Dietrich

    2017-02-01

    In this work we address the problem of detecting and recognizing transparent objects using depth images from an RGB-D camera. Using this type of sensor usually prohibits the localization of transparent objects since the structured light pattern of these cameras is not reflected by transparent surfaces. Instead, transparent surfaces often appear as undefined values in the resulting images. However, these erroneous sensor readings form characteristic patterns that we exploit in the presented approach. The sensor data is fed into a deep convolutional neural network that is trained to classify and localize drinking glasses. We evaluate our approach with four different types of transparent objects. To our best knowledge, no datasets offering depth images of transparent objects exist so far. With this work we aim at closing this gap by providing our data to the public.

  7. Optically Transparent Microwave Polarizer Based On Quasi-Metallic Graphene.

    PubMed

    Grande, Marco; Bianco, Giuseppe Valerio; Vincenti, Maria Antonietta; de Ceglia, Domenico; Capezzuto, Pio; Scalora, Michael; D'Orazio, Antonella; Bruno, Giovanni

    2015-11-25

    In this paper, we report on the engineering and the realization of optically transparent graphene-based microwave devices using Chemical Vapour Deposition (CVD) graphene whose sheet resistance may be tailored down to values below 30 Ω/sq. In particular, we show that the process was successfully used to realize and characterize a simple, optically transparent graphene-based wire-grid polarizer at microwave frequencies (X band). The availability of graphene operating in a quasi-metallic region may allow the integration of graphene layers in several microwave components, thus leading to the realization of fully transparent (and flexible) microwave devices.

  8. Optically Transparent Microwave Polarizer Based On Quasi-Metallic Graphene

    PubMed Central

    Grande, Marco; Bianco, Giuseppe Valerio; Vincenti, Maria Antonietta; de Ceglia, Domenico; Capezzuto, Pio; Scalora, Michael; D’Orazio, Antonella; Bruno, Giovanni

    2015-01-01

    In this paper, we report on the engineering and the realization of optically transparent graphene-based microwave devices using Chemical Vapour Deposition (CVD) graphene whose sheet resistance may be tailored down to values below 30 Ω/sq. In particular, we show that the process was successfully used to realize and characterize a simple, optically transparent graphene-based wire-grid polarizer at microwave frequencies (X band). The availability of graphene operating in a quasi-metallic region may allow the integration of graphene layers in several microwave components, thus leading to the realization of fully transparent (and flexible) microwave devices. PMID:26603112

  9. Fully transparent and rollable electronics.

    PubMed

    Mativenga, Mallory; Geng, Di; Kim, Byungsoon; Jang, Jin

    2015-01-28

    Major obstacles toward the manufacture of transparent and flexible display screens include the difficulty of finding transparent and flexible semiconductors and electrodes, temperature restrictions of flexible plastic substrates, and bulging or warping of the flexible electronics during processing. Here we report the fabrication and performance of fully transparent and rollable thin-film transistor (TFT) circuits for display applications. The TFTs employ an amorphous indium-gallium-zinc oxide semiconductor (with optical band gap of 3.1 eV) and amorphous indium-zinc oxide transparent conductive electrodes, and are built on 15-μm-thick solution-processed colorless polyimide (CPI), resulting in optical transmittance >70% in the visible range. As the CPI supports processing temperatures >300 °C, TFT performance on plastic is similar to that on glass, with typical field-effect mobility, turn-on voltage, and subthreshold voltage swing of 12.7 ± 0.5 cm(2)/V·s, -1.7 ± 0.2 V, and 160 ± 29 mV/dec, respectively. There is no significant degradation after rolling the TFTs 100 times on a cylinder with a radius of 4 mm or when shift registers, each consisting of 40 TFTs, are operated while bent to a radius of 2 mm. For handling purposes, carrier glass is used during fabrication, together with a very thin (∼1 nm) solution-processed carbon nanotube (CNT)/graphene oxide (GO) backbone that is first spin-coated on the glass to decrease adhesion of the CPI to the glass; peel strength of the CPI from glass decreases from 0.43 to 0.10 N/cm, which eases the process of detachment performed after device fabrication. Given that the CNT/GO remains embedded under the CPI after detachment, it minimizes wrinkling and decreases the substrate's tensile elongation from 8.0% to 4.6%. Device performance is also stable under electrostatic discharge exposures up to 10 kV, as electrostatic charge can be released via the conducting CNTs.

  10. Potential of Using iPad as a Supplement to Teach Math to Students with Learning Disabilities

    ERIC Educational Resources Information Center

    Kaur, Daljit; Koval, Ashely; Chaney, Hannah

    2017-01-01

    This qualitative study was conducted to identify the potential of using iPad as a supplement to teach math to students with learning disabilities. Ten teacher candidates from a university in the south provided one-on-one math tutoring services to ten students in a self-contained classroom at a local high poverty elementary school. The students…

  11. Free-Standing and Transparent Graphene Membrane of Polyhedron Box-Shaped Basic Building Units Directly Grown Using a NaCl Template for Flexible Transparent and Stretchable Solid-State Supercapacitors.

    PubMed

    Li, Na; Yang, Gongzheng; Sun, Yong; Song, Huawei; Cui, Hao; Yang, Guowei; Wang, Chengxin

    2015-05-13

    Transparency has never been integrated into freestanding flexible graphene paper (FF-GP), although FF-GP has been discussed extensively, because a thin transparent graphene sheet will fracture easily when the template or substrate is removed using traditional methods. Here, transparent FF-GP (FFT-GP) was developed using NaCl as the template and was applied in transparent and stretchable supercapacitors. The capacitance was improved by nearly 1000-fold compared with that of the laminated or wrinkled chemical vapor deposition graphene-film-based supercapacitors.

  12. Price Transparency in the Online Age.

    PubMed

    Kaplan, Jonathan L; Mills, Parker H

    2016-05-01

    Plastic surgeons are sometimes hesitant to provide their pricing information online, due to several concerns. However, if implemented right, price transparency can be used as a lead generation tool that provides consumers with the pricing information they want and gives the physician the consumer's contact information for follow-up. This study took place during the author's first year in private practice in a new city. An interactive price transparency platform (ie, cost estimator) was integrated into his website, allowing consumers to submit a "wishlist" of procedures to check pricing on these procedures of interest. However, the consumer must submit their contact information to receive the desired breakdown of costs that are tailored based on the author's medical fees. During that first year, without any advertising expenditure, the author's website received 412 wishlists from 208 unique consumers. Consumers (17.8%) that submitted a wishlist came in for a consultation and 62% of those booked a procedure. The average value of a booked procedure was over US $4000 and cumulatively, all of the leads from this one lead source in that first year generated over US $92,000 in revenue. When compared with non-price-aware patients, price-aware patients were 41% more likely to book a procedure. Price transparency led to greater efficiency and reduced consultations that ended in "sticker shock." When prudently integrated into a medical practice, price transparency can be a great lead generation source for patients that are (1) paying out of pocket for medically necessary services due to a high-deductible health plan or (2) paying for services not typically covered by insurance, such as cosmetic services.

  13. Can teachers' global ratings identify children with academic problems?

    PubMed

    Glascoe, F P

    2001-06-01

    Physicians often elicit ratings from teachers when making diagnostic, treatment, or referral decisions. The purpose of this study was to view the relationship between teachers' ratings and children's academic skills, assess the utility of teacher ratings in detecting academic problems, and thus determine whether physicians can depend on teacher ratings when making decisions about patients' needs. Subjects were a national sample of 80 teachers and 934 children between 6 and 13 years of age participating in a test standardization study. Families were representative of United States demographics in terms of parental level of education, income, and ethnicity, and sites were geographically diverse elementary schools. Children were administered the Comprehensive Inventory of Basic Skills--Revised (CIBS-R), a diagnostic academic achievement test. Teachers rated children's academic performance on a five-point scale ranging from far above average to far below average and were blinded to the results of the CIBS-R. Teacher ratings varied significantly with children's performance for all academic domains. Logistic regression revealed that teacher ratings were best predicted by children's performance in basic reading skills, followed by math skills, and were not influenced by race, parents' level of education, history of retention, or gender. Participation in Title I services, testing in winter or spring, and parents who spoke a language other than English produced significantly lower ratings. Nevertheless, teachers rated as average many students with mild to moderate academic difficulties. School system personnel and health care providers should avoid sole dependence on global teacher ratings when deciding which students need special education referrals or other services. Supplementing teacher ratings with standardized screening test results is needed to ensure accurate decision-making.

  14. A Music Teachers' Primer to Reading. Supplemental Material for RDG 467, RDG 480, RDG 507 and RDG 544.

    ERIC Educational Resources Information Center

    Parrish, Bert, Ed.; And Others

    This primer was developed to help secondary school music teachers to encourage and promote reading in their curricular programs. Guidelines and suggestions are offered on ways teachers can stimulate student reading by capitalizing on student interests and on ways teachers can reinforce vocabulary and comprehension skills. The manual's first…

  15. Transparency for international trade

    Treesearch

    K. R. Lakin; G. A. Fowler; W. D. Bailey; J. Cavey; P. Lehtonen

    2003-01-01

    U.S. Department of Agriculture - Animal and Plant Health Inspection Service - Plant Protection and Quarantine (USDA-APHIS-PPQ) has developed a Regulated Plant Pest List (RPPL). This provides trading partners with an official list of plant pests of concern to the U.S., along with providing greater transparency of Agency actions.

  16. Theory-driven design of hole-conducting transparent oxides

    NASA Astrophysics Data System (ADS)

    Trimarchi, G.; Peng, H.; Im, J.; Freeman, A. J.; Cloet, V.; Raw, A.; Poeppelmeier, K. R.; Biswas, K.; Lany, S.; Zunger, A.

    2012-02-01

    The design of p-type transparent conducting oxides (TCOs) aims at simultaneously achieving transparency and high hole concentration and hole conductivity in one compound. Such design principles (DPs) define a multi-objective optimization problem that is to be solved by searching a large set of compounds for optimum ones. Here, we screen a large set of ternary compounds, including Ag and Cu oxides and chalcogenides, by calculating via first-principles methods the design properties of each compound, in order to search for optimum p-type TCOs. We first select Ag3VO4 as a case study of the application of ab-initio methods to assess a compound as a candidate p-type TCO. We predict Ag3VO4 (i) to have a hole concentration of 10^14 cm-3 at room temperature, (ii) to be at the verge of transparency, and (iii) to have lower hole effective mass than the prototype p-type TCO CuAlO2. We then map the hole effective mass vs. the band gap in the selected compounds and determine those that best meet the DPs by having simultaneously minimum effective mass and a band gap large enough for transparency.

  17. To supplement or not to supplement: a metabolic network framework for human nutritional supplements.

    PubMed

    Nogiec, Christopher D; Kasif, Simon

    2013-01-01

    Flux balance analysis and constraint based modeling have been successfully used in the past to elucidate the metabolism of single cellular organisms. However, limited work has been done with multicellular organisms and even less with humans. The focus of this paper is to present a novel use of this technique by investigating human nutrition, a challenging field of study. Specifically, we present a steady state constraint based model of skeletal muscle tissue to investigate amino acid supplementation's effect on protein synthesis. We implement several in silico supplementation strategies to study whether amino acid supplementation might be beneficial for increasing muscle contractile protein synthesis. Concurrent with published data on amino acid supplementation's effect on protein synthesis in a post resistance exercise state, our results suggest that increasing bioavailability of methionine, arginine, and the branched-chain amino acids can increase the flux of contractile protein synthesis. The study also suggests that a common commercial supplement, glutamine, is not an effective supplement in the context of increasing protein synthesis and thus, muscle mass. Similar to any study in a model organism, the computational modeling of this research has some limitations. Thus, this paper introduces the prospect of using systems biology as a framework to formally investigate how supplementation and nutrition can affect human metabolism and physiology.

  18. Economics. Teacher's Guide [and Student Guide]. Parallel Alternative Strategies for Students (PASS).

    ERIC Educational Resources Information Center

    Chambliss, Robert, Ed.; Fresen, Sue, Ed.

    This teacher's guide and student guide unit contains supplemental readings, activities, and methods adapted for secondary students who have disabilities and other students with diverse learning needs. The curriculum correlates to Florida's Sunshine State Standards and is divided into the following six units of study: (1) introduction to economics,…

  19. Teacher's Guide to Accompany "Artes Latinae," the Encyclopaedia Britannica Latin Instructional System.

    ERIC Educational Resources Information Center

    Masciantonio, Rudolph; And Others

    This guide, a supplement to the "Artes Latinae Level One Teacher's Manual," prepared for use in the School District of Philadelphia, focuses primarily on how to adapt this course, intended for individualized instruction, to group instruction. Discussion of the multisensory instructional system includes remarks concerning the use of films, study…

  20. Inventory transparency for agricultural produce through IOT

    NASA Astrophysics Data System (ADS)

    Srinivasan, S. P.; Sorna Shanthi, D.; Anand, Aashish V.

    2017-06-01

    Re-structuring the practices of traditional inventory management is becoming more essential to optimize the supply chain transparency and accuracy of agricultural produce. A flexible and transparent inventory management system is becoming the need of any agricultural commodity. It was noticed that the major setback for the farmers who are the suppliers of the farm produce is due to poor supply chain integration. The recent advent technologies and IT explosion can bring up a greater impact in the process of storing, tracking, distributing and monitoring perishable agriculture produce of day to day life. The primary focus of this paper is to integrate IoT into inventory management and other inbound logistics management of agriculture produce. The unique features of agricultural produce like a prediction of supply, demand, the location of warehouses, distribution and tracking of inventory can be integrated through IoT. This paper proposes a conceptual framework for inventory management transparency involved in the supply chain of agriculture produce.

  1. Photon number dependent group velocity in vacuum induced transparency

    NASA Astrophysics Data System (ADS)

    Lauk, Nikolai; Fleischhauer, Michael

    2015-05-01

    Vacuum induced transparency (VIT) is an effect which occurs in an ensemble of three level atoms in a Λ configuration that interact with two quantized fields. Coupling of one transition to a cavity mode induces transparency for the second field on the otherwise opaque transition similar to the well known EIT effect. In the strong coupling regime even an empty cavity leads to transparency, in contrast to EIT where the presence of a strong control field is required. This transparency is accompanied by a reduction of the group velocity for the propagating field. However, unlike in EIT the group velocity in VIT depends on the number of incoming photons, i.e. different photon number components propagate with different velocities. Here we investigate the possibility of using this effect to spatially separate different photon number components of an initially coherent pulse. We present the results of our calculations and discuss a possible experimental realization.

  2. Dietary Supplements

    MedlinePlus

    ... For Consumers Consumer Information by Audience For Women Dietary Supplements: Tips for Women Share Tweet Linkedin Pin it ... or 10877-382-4357. To Learn More about Dietary Supplements Information for Consumers on Using Dietary Supplements NIH ...

  3. Is the cosmic transparency spatially homogeneous?

    NASA Astrophysics Data System (ADS)

    Chen, Jun; Wu, Puxun; Yu, Hongwei; Li, Zhengxiang

    2012-10-01

    We study the constraints on the cosmic opacity using the latest BAO and Union2 SNIa data in this paper and find that the best fit values seem to indicate that an opaque universe is preferred in redshift regions 0.20-0.35, 0.35-0.44 and 0.60-0.73, whereas, a transparent universe is favored in redshift regions 0.106-0.20, 0.44-0.57 and 0.57-0.60. However, our result is still consistent with a transparent universe at the 1σ confidence level, even though the best-fit cosmic opacity oscillates between zero and some nonzero values as the redshift varies.

  4. LEARNING NONADJACENT DEPENDENCIES IN PHONOLOGY: TRANSPARENT VOWELS IN VOWEL HARMONY

    PubMed Central

    Finley, Sara

    2015-01-01

    Nonadjacent dependencies are an important part of the structure of language. While the majority of syntactic and phonological processes occur at a local domain, there are several processes that appear to apply at a distance, posing a challenge for theories of linguistic structure. This article addresses one of the most common nonadjacent phenomena in phonology: transparent vowels in vowel harmony. Vowel harmony occurs when adjacent vowels are required to share the same phonological feature value (e.g. V+F C V+F). However, transparent vowels create a second-order nonadjacent pattern because agreement between two vowels can ‘skip’ the transparent neutral vowel in addition to consonants (e.g. V+F C VT−F C V+F). Adults are shown to display initial learning biases against second-order nonadjacency in experiments that use an artificial grammar learning paradigm. Experiments 1–3 show that adult learners fail to learn the second-order long-distance dependency created by the transparent vowel (as compared to a control condition). In experiments 4–5, training in terms of overall exposure as well as the frequency of relevant transparent items was increased. With adequate exposure, learners reliably generalize to novel words containing transparent vowels. The experiments suggest that learners are sensitive to the structure of phonological representations, even when learning occurs at a relatively rapid pace.* PMID:26146423

  5. Embedded Ag Grid Electrodes as Current Collector for Ultraflexible Transparent Solid-State Supercapacitor.

    PubMed

    Xu, Jian-Long; Liu, Yan-Hua; Gao, Xu; Sun, Yilin; Shen, Su; Cai, Xinlei; Chen, Linsen; Wang, Sui-Dong

    2017-08-23

    Flexible transparent solid-state supercapacitors have attracted immerse attention for the power supply of next-generation flexible "see-through" or "invisible" electronics. For fabrication of such devices, high-performance flexible transparent current collectors are highly desired. In this paper, the utilization of embedded Ag grid transparent conductive electrodes (TCEs) fabricated by a facile soft ultraviolet imprinting lithography method combined with scrap techniques, as the current collector for flexible transparent solid-state supercapacitors, is demonstrated. The embedded Ag grid TCEs exhibit not only excellent optoelectronic properties (R S ∼ 2.0 Ω sq -1 and T ∼ 89.74%) but also robust mechanical properties, which could meet the conductivity, transparency, and flexibility needs of current collectors for flexible transparent supercapacitors. The obtained supercapacitor exhibits large specific capacitance, long cycling life, high optical transparency (T ∼ 80.58% at 550 nm), high flexibility, and high stability. Owing to the embedded Ag grid TCE structure, the device shows a slight capacitance loss of 2.6% even after 1000 cycles of repetitive bending for a bending radius of up to 2.0 mm. This paves the way for developing high-performance current collectors and thus flexible transparent energy storage devices, and their general applicability opens up opportunities for flexible transparent electronics.

  6. Use of the Curriculum Research Framework (CRF) for Developing a Reading-Comprehension Curricular Supplement for the Primary Grades

    ERIC Educational Resources Information Center

    Elementary School Journal, 2016

    2016-01-01

    This article describes nine phases of curriculum-development activities conducted by the Language and Reading Research Consortium (LARRC), the end result of which was to arrive at a research-based supplemental curriculum that could be used by teachers of English-speaking or bilingual Spanish-English-speaking children in prekindergarten and…

  7. Transparency ethics in practice: Revisiting financial conflicts of interest disclosure forms in clinical practice guidelines

    PubMed Central

    Sharara, Nour; Kaltenbach, Tonya; Laine, Loren; McQuaid, Kenneth; Soetikno, Roy; Subramanian, Venkataraman

    2017-01-01

    Background Authors of clinical practice guidelines (CPGs) disclose financial conflicts of interest (FCOIs) to promote transparency ethics. Typically, they do so on standard declaration forms containing generic open-ended questions on FCOIs. Yet, the literature is scant on the format and effect of alternative disclosure forms. Does supplementing a standard form with subsequent detailed disclosure forms tailored to the context of the CPG improve the yield or accuracy of FCOIs declarations? Methods For an international CPG in gastroenterology on the endoscopic surveillance for colorectal neoplasia in inflammatory bowel disease, we compared the use of a standard FCOIs disclosure form with a contextual FCOIs disclosure form that detailed commercial relations related to the CPG topic. This included manufacturers of endoscopes, endoscopy equipment and accessories. Participants completed the generic form early, and the supplementary contextual form six months later. We then compared the FCOI disclosures obtained. Findings 26 participants provided FCOIs disclosures using both disclosure forms. We found discrepancies regarding (1) the disclosure of FCOIs (presence/absence), and (2) the listing of financial entities. While the number of participants who disclosed a FCOI remained the same (30.8%) using the two forms, disclosures were not from the same individuals: two additional participants disclosed a FCOI, whereas two participants withdrew previous disclosures. Among those who reported a FCOI in either form, we noted inconsistencies in disclosures for 70% of the participants. This included changes in FCOIs disclosure status or modifications of "their commercial relations". Discussion Accurate reporting of FCOIs advances the transparency and ethical integrity of CPGs. Our experience suggests that a contextual FCOIs disclosure form tailored to content of the CPG with narrow, detailed questions provides supplementary, more complete FCOIs declarations than generic forms alone

  8. Effect of sintering on transparent TiO2 18NR-T type thin films as the working electrode for transparent solar cells

    NASA Astrophysics Data System (ADS)

    Supriyanto, A.; Nandani; Wahyuningsih, S.; Ramelan, A. H.

    2018-03-01

    The working electrode based on semiconductor transparent TiO2 type 18NR-T for transparent solar cells have been grown by screen printing method. This study aim is to determine the effect of sintering on TiO2 thin films transparent as the working electrode of transparent solar cells. TiO2 films will be sintered at temperature 450°C, 500°C, 550°C and 600°C. TiO2 films optical properties were characterized using UV-Vis spectrophotometer, electrical properties were characterized using 4 point probemethods and the crystallization was characterized by X-Ray Diffraction (XRD). The lowest transmittance due to the treatment of annealing temperature variations is 550°C because the 550°C TiO2 layer is more absorbing. The peaks resulted from the annealing temperature treatment show that the high temperature the more anatase peaks. Characterization using four-point probe showed that the highest conductivity of TiO2 18NR-T thin film was 2.42 x 102 Ω-1m-1 at annealing temperature 550°C.

  9. Pediatric Price Transparency: Still Opaque With Opportunities for Improvement.

    PubMed

    Faherty, Laura J; Wong, Charlene A; Feingold, Jordyn; Li, Joan; Town, Robert; Fieldston, Evan; Werner, Rachel M

    2017-10-01

    Price transparency is gaining importance as families' portion of health care costs rise. We describe (1) online price transparency data for pediatric care on children's hospital Web sites and state-based price transparency Web sites, and (2) the consumer experience of obtaining an out-of-pocket estimate from children's hospitals for a common procedure. From 2015 to 2016, we audited 45 children's hospital Web sites and 38 state-based price transparency Web sites, describing availability and characteristics of health care prices and personalized cost estimate tools. Using secret shopper methodology, we called children's hospitals and submitted online estimate requests posing as a self-paying family requesting an out-of-pocket estimate for a tonsillectomy-adenoidectomy. Eight children's hospital Web sites (18%) listed prices. Twelve (27%) provided personalized cost estimate tool (online form n = 5 and/or phone number n = 9). All 9 hospitals with a phone number for estimates provided the estimated patient liability for a tonsillectomy-adenoidectomy (mean $6008, range $2622-$9840). Of the remaining 36 hospitals without a dedicated price estimate phone number, 21 (58%) provided estimates (mean $7144, range $1200-$15 360). Two of 4 hospitals with online forms provided estimates. Fifteen (39%) state-based Web sites distinguished between prices for pediatric and adult care. One had a personalized cost estimate tool. Meaningful prices for pediatric care were not widely available online through children's hospital or state-based price transparency Web sites. A phone line or online form for price estimates were effective strategies for hospitals to provide out-of-pocket price information. Opportunities exist to improve pediatric price transparency. Copyright © 2017 by the American Academy of Pediatrics.

  10. "We Were Told We're Not Teachers... It Gets Difficult to Draw the Line": Negotiating Roles in Peer-Assisted Study Sessions (PASS)

    ERIC Educational Resources Information Center

    Brown, Kim; Nairn, Karen; van der Meer, Jacques; Scott, Carole

    2014-01-01

    Peer learning models in pre-service teacher education are in the early stages of implementation. In this article, we evaluated a pilot Peer-Assisted Study Sessions (PASS) program that supplemented a course for pre-service teachers at one New Zealand university. PASS participants discussed experiences of the program, revealing tensions between what…

  11. Thermal modifications of root transparency and implications for aging: a pilot study.

    PubMed

    Gibelli, Daniele; De Angelis, Danilo; Rossetti, Francesca; Cappella, Annalisa; Frustaci, Michela; Magli, Francesca; Mazzarelli, Debora; Mazzucchi, Alessandra; Cattaneo, Cristina

    2014-01-01

    Root transparency has proven to be related to age and has been considered by different odontological methods for age estimation. Very little is known concerning possible variations of root transparency with heat, although the applicability of the method to burnt remains depends on the possible modifications of this specific variable. This pilot study presents the results of an experiment performed on 105 teeth obtained from dental patients and autopsy material, heated in an industrial oven at 50°C, 100°C, 150°C and 200°C. Root transparency was measured before and after the charring experiment. The heating process proved to radically modify root transparency, which decreased in 20% of samples at 50°C, in 34.6% at 100°C, in 50% at 150°C, in 77% at 200°C. The overall correlation index (CI) between decrease in root transparency and increase in temperature amounted to 0.96. These results show that heat may modify root transparency and suggest caution in using methods based on root transparency for age estimation. © 2013 American Academy of Forensic Sciences.

  12. Measurement of transparency ratios for protons from short-range correlated pairs

    NASA Astrophysics Data System (ADS)

    Hen, O.; Hakobyan, H.; Shneor, R.; Piasetzky, E.; Weinstein, L. B.; Brooks, W. K.; May-Tal Beck, S.; Gilad, S.; Korover, I.; Beck, A.; Adhikari, K. P.; Aghasyan, M.; Amaryan, M. J.; Anefalos Pereira, S.; Arrington, J. R.; Baghdasaryan, H.; Ball, J.; Battaglieri, M.; Batourine, V.; Bedlinskiy, I.; Biselli, A. S.; Bono, J.; Boiarinov, S.; Briscoe, W. J.; Burkert, V. D.; Carman, D. S.; Celentano, A.; Chandavar, S.; Cole, P. L.; Contalbrigo, M.; Crede, V.; D'Angelo, A.; Dashyan, N.; De Vita, R.; De Sanctis, E.; Deur, A.; Djalali, C.; Dodge, G. E.; Doughty, D.; Dupre, R.; Egiyan, H.; El Alaoui, A.; El Fassi, L.; Eugenio, P.; Fedotov, G.; Fegan, S.; Fleming, J. A.; Gabrielyan, M. Y.; Gevorgyan, N.; Gilfoyle, G. P.; Giovanetti, K. L.; Girod, F. X.; Goetz, J. T.; Gohn, W.; Golovatch, E.; Gothe, R. W.; Griffioen, K. A.; Guo, L.; Hafidi, K.; Harrison, N.; Heddle, D.; Hicks, K.; Holtrop, M.; Hyde, C. E.; Ilieva, Y.; Ireland, D. G.; Ishkhanov, B. S.; Isupov, E. L.; Jo, H. S.; Joo, K.; Keller, D.; Khandaker, M.; Khetarpal, P.; Kim, A.; Klein, F. J.; Koirala, S.; Kubarovsky, A.; Kubarovsky, V.; Kuhn, S. E.; Livingston, K.; Lu, H. Y.; MacGregor, I. J. D.; Martinez, D.; Mayer, M.; McKinnon, B.; Mineeva, T.; Mokeev, V.; Montgomery, R. A.; Moutarde, H.; Munevar, E.; Munoz Camacho, C.; Mustapha, B.; Nadel-Turonski, P.; Nasseripour, R.; Niccolai, S.; Niculescu, G.; Niculescu, I.; Osipenko, M.; Ostrovidov, A. I.; Pappalardo, L. L.; Paremuzyan, R.; Park, K.; Park, S.; Pasyuk, E.; Phelps, E.; Phillips, J. J.; Pisano, S.; Pivnyuk, N.; Pogorelko, O.; Pozdniakov, S.; Price, J. W.; Procureur, S.; Protopopescu, D.; Puckett, A. J. R.; Raue, B. A.; Rimal, D.; Ripani, M.; Ritchie, B. G.; Rosner, G.; Rossi, P.; Sabatié, F.; Saini, M. S.; Schott, D.; Schumacher, R. A.; Seraydaryan, H.; Sharabian, Y. G.; Smith, G. D.; Sober, D. I.; Sokhan, D.; Stepanyan, S. S.; Stepanyan, S.; Strauch, S.; Taiuti, M.; Tang, W.; Taylor, C. E.; Tian, Ye; Tkachenko, S.; Ungaro, M.; Vernarsky, B.; Vlassov, A.; Voskanyan, H.; Voutier, E.; Walford, N. K.; Watts, D. P.; Wood, M. H.; Zachariou, N.; Zana, L.; Zhang, J.; Zheng, X.; Zonta, I.

    2013-05-01

    Nuclear transparency, Tp (A), is a measure of the average probability for a struck proton to escape the nucleus without significant re-interaction. Previously, nuclear transparencies were extracted for quasi-elastic A (e ,e‧ p) knockout of protons with momentum below the Fermi momentum, where the spectral functions are well known. In this Letter we extract a novel observable, the transparency ratio, Tp (A) /Tp(12 C), for knockout of high-missing-momentum protons from the breakup of short-range correlated pairs (2N-SRC) in Al, Fe and Pb nuclei relative to C. The ratios were measured at momentum transfer Q2 ⩾ 1.5(GeV /c) 2 and xB ⩾ 1.2 where the reaction is expected to be dominated by electron scattering from 2N-SRC. The transparency ratios of the knocked-out protons coming from 2N-SRC breakup are 20-30% lower than those of previous results for low missing momentum. They agree with Glauber calculations and agree with renormalization of the previously published transparencies as proposed by recent theoretical investigations. The new transparencies scale as A - 1 / 3, which is consistent with dominance of scattering from nucleons at the nuclear surface.

  13. Digital photography and transparency-based methods for measuring wound surface area.

    PubMed

    Bhedi, Amul; Saxena, Atul K; Gadani, Ravi; Patel, Ritesh

    2013-04-01

    To compare and determine a credible method of measurement of wound surface area by linear, transparency, and photographic methods for monitoring progress of wound healing accurately and ascertaining whether these methods are significantly different. From April 2005 to December 2006, 40 patients (30 men, 5 women, 5 children) admitted to the surgical ward of Shree Sayaji General Hospital, Baroda, had clean as well as infected wound following trauma, debridement, pressure sore, venous ulcer, and incision and drainage. Wound surface areas were measured by these three methods (linear, transparency, and photographic methods) simultaneously on alternate days. The linear method is statistically and significantly different from transparency and photographic methods (P value <0.05), but there is no significant difference between transparency and photographic methods (P value >0.05). Photographic and transparency methods provided measurements of wound surface area with equivalent result and there was no statistically significant difference between these two methods.

  14. Thermally Diffused Al:ZnO Thin Films for Broadband Transparent Conductor.

    PubMed

    Tong, Chong; Yun, Juhyung; Chen, Yen-Jen; Ji, Dengxin; Gan, Qiaoqiang; Anderson, Wayne A

    2016-02-17

    Here, we report an approach to realize highly transparent low resistance Al-doped ZnO (AZO) films for broadband transparent conductors. Thin Al films are deposited on ZnO surfaces, followed by thermal diffusion processes, introducing the Al doping into ZnO thin films. By utilizing the interdiffusion of Al, Zn, and O, the chemical state of Al on the surfaces can be converted to a fully oxidized state, resulting in a low sheet resistance of 6.2 Ω/sq and an excellent transparency (i.e., 96.5% at 550 nm and higher than 85% up to 2500 nm), which is superior compared with some previously reported values for indium tin oxide, solution processed AZO, and many transparent conducting materials using novel nanostructures. Such AZO films are also applied as transparent conducting layers for AZO/Si heterojunction solar cells, demonstrating their applications in optoelectronic devices.

  15. Transparency has its limits. Questions arise about why the transparency-preaching Blues association is getting quiet about its members' fiscal results.

    PubMed

    Benko, Laura B

    2006-08-07

    The Blue Cross and Blue Shield Association was touting its plans' devotion to transparency last week, unveiling a database offering insight into a variety of healthcare trends. But some are doubting the Blues' sincerity, given the association's decision to withhold aggregate plan financial results. "It seems very inconsistent with their new emphasis on transparency and empowering people with information," says Bruce McPherson, left.

  16. Consumer Mathematics. Teacher's Guide [and Student Guide]. Parallel Alternative Strategies for Students (PASS).

    ERIC Educational Resources Information Center

    Walford, Sylvia B.; Thomas, Portia R.

    This teacher's guide and student guide are designed to accompany a consumer mathematics textbook that contains supplemental readings, activities, and methods adapted for secondary students who have disabilities and other students with diverse learning needs. The materials are designed to help these students succeed in regular education content…

  17. Physical Science. Teacher's Guide [and Student Guide]. Parallel Alternative Strategies for Students (PASS).

    ERIC Educational Resources Information Center

    Danner, Greg, Ed.; Fresen, Sue, Ed.

    This teacher's guide and student guide unit contains supplemental readings, activities, and methods adapted for secondary students who have disabilities and other students with diverse learning needs. The materials are designed to help these students succeed in regular education content courses and include simplified text and smaller units of…

  18. Bioinspired Transparent Laminated Composite Film for Flexible Green Optoelectronics.

    PubMed

    Lee, Daewon; Lim, Young-Woo; Im, Hyeon-Gyun; Jeong, Seonju; Ji, Sangyoon; Kim, Yong Ho; Choi, Gwang-Mun; Park, Jang-Ung; Lee, Jung-Yong; Jin, Jungho; Bae, Byeong-Soo

    2017-07-19

    Herein, we report a new version of a bioinspired chitin nanofiber (ChNF) transparent laminated composite film (HCLaminate) made of siloxane hybrid materials (hybrimers) reinforced with ChNFs, which mimics the nanofiber-matrix structure of hierarchical biocomposites. Our HCLaminate is produced via vacuum bag compressing and subsequent UV-curing of the matrix resin-impregnated ChNF transparent paper (ChNF paper). It is worthwhile to note that this new type of ChNF-based transparent substrate film retains the strengths of the original ChNF paper and compensates for ChNF paper's drawbacks as a flexible transparent substrate. As a result, compared with high-performance synthetic plastic films, such as poly(ethylene terephthalate), poly(ether sulfone), poly(ethylene naphthalate), and polyimide, our HCLaminate is characterized to exhibit extremely smooth surface topography, outstanding optical clarity, high elastic modulus, high dimensional stability, etc. To prove our HCLaminate as a substrate film, we use it to fabricate flexible perovskite solar cells and a touch-screen panel. As far as we know, this work is the first to demonstrate flexible optoelectronics, such as flexible perovskite solar cells and a touch-screen panel, actually fabricated on a composite film made of ChNF. Given its desirable macroscopic properties, we envision our HCLaminate being utilized as a transparent substrate film for flexible green optoelectronics.

  19. Demystifying patient price estimates. The advantages of transparency.

    PubMed

    Kane, Cheri S; Harvey, Gayla

    2015-05-01

    With the increase of high-deductible health plans, more consumers want to know the cost of their health care before they purchase services. A healthcare organization should formulate transparent price policies that: Fit with its intentions, processes, and goals. Ensure consumers are thoroughly educated about their financial responsibilities. Include the use of consumer pricing tools that help patients feel like empowered consumers. Reflect an enterprisewide culture of transparency.

  20. Transparent Conductive Ink for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Patlan, X. J.; Rolin, T. D.

    2017-01-01

    NASA analyzes, tests, packages, and fabricates electrical, electronic, and electromechanical (EEE) parts. Nanotechnology is listed in NASA's Technology Roadmap as a key area to invest for further development.1 This research project focused on using nanotechnology to improve electroluminescent lighting in terms of additive manufacturing and to increase energy efficiency. Specifically, this project's goal was to produce a conductive but transparent printable ink that can be sprayed on any surface for use as one of the electrodes in electroluminescent device design. This innovative work is known as thick film dielectric electroluminescent (TDEL) technology. TDEL devices are used for "backlighting, illumination, and identification due to their tunable color output, scalability, and efficiency" (I.K. Small, T.D. Rolin, and A.D. Shields, "3D Printed Electroluminescent Light Panels," NASA Fiscal Year 2017 Center Innovation Fund Proposal, unpublished data, 2017). These devices use a 'front-to-back' printing method, where the substrate is the transparent layer, and the dielectric and phosphor are layered on top. This project is a first step in the process of creating a 3D printable 'back-to-front' electroluminescent device. Back-to-front 3D-printed devices are beneficial because they can be printed onto different substrates and embedded in different surfaces, and the substrate is not required to be transparent, all because the light is emitted from the top surface through the transparent conductor. Advances in this area will help further development of printing TDEL devices on an array of different surfaces. Figure 1 demonstrates the layering of the two electrodes that are aligned in a parallel plate capacitor structure (I.K. Small, T.D. Rolin, and A.D. Shields, "3D Printed Electroluminescent Light Panels," NASA Fiscal Year 2017 Center Innovation Fund Proposal, unpublished data, 2017). Voltage is applied across the device, and the subsequent electron excitation results in

  1. Flexible, transparent electrodes using carbon nanotubes

    PubMed Central

    2012-01-01

    We prepare thin single-walled carbon nanotube networks on a transparent and flexible substrate with different densities, using a very simple spray method. We measure the electric impedance at different frequencies Z(f) in the frequency range of 40 Hz to 20 GHz using two different methods: a two-probe method in the range up to 110 MHz and a coaxial (Corbino) method in the range of 10 MHz to 20 GHz. We measure the optical absorption and electrical conductivity in order to optimize the conditions for obtaining optimum performance films with both high electrical conductivity and transparency. We observe a square resistance of 1 to 8.5 kΩ for samples showing 65% to 85% optical transmittance, respectively. For some applications, we need flexibility and not transparency: for this purpose, we deposit a thick film of single-walled carbon nanotubes on a flexible silicone substrate by spray method from an aqueous suspension of carbon nanotubes in a surfactant (sodium dodecyl sulphate), thereby obtaining a flexible conducting electrode showing an electrical resistance as low as 200 Ω/sq. When stretching up to 10% and 20%, the electrical resistance increases slightly, recovering the initial value for small elongations up to 10%. We analyze the stretched and unstretched samples by Raman spectroscopy and observe that the breathing mode on the Raman spectra is highly sensitive to stretching. The high-energy Raman modes do not change, which indicates that no defects are introduced when stretching. Using this method, flexible conducting films that may be transparent are obtained just by employing a very simple spray method and can be deposited on any type or shape of surface. PMID:23074999

  2. Electromagnetically Induced Transparency In Rydberg Atomic Medium

    NASA Astrophysics Data System (ADS)

    Deng, Li; Cong, Lu; Chen, Ai-Xi

    2018-03-01

    Due to possessing big principal quantum number, Rydberg atom has some unique properties, for example: its radiative lifetime is long, dipole moment is large, and interaction between atoms is strong and so on. These properties make one pay attention to Rydberg atoms. In this paper we investigate the effects of Rydberg dipole-dipole interactions on electromagnetically induced transparency (EIT) schemes and group velocity in three-level systems of ladder type, which provides theoretical foundation for exploring the linear and nonlinear characteristics of light in a Rydberg electromagnetically-induced-transparency medium.

  3. Dietary supplements.

    PubMed

    Maughan, Ron J; King, Doug S; Lea, Trevor

    2004-01-01

    For the athlete training hard, nutritional supplements are often seen as promoting adaptations to training, allowing more consistent and intensive training by promoting recovery between training sessions, reducing interruptions to training because of illness or injury, and enhancing competitive performance. Surveys show that the prevalence of supplement use is widespread among sportsmen and women, but the use of few of these products is supported by a sound research base and some may even be harmful to the athlete. Special sports foods, including energy bars and sports drinks, have a real role to play, and some protein supplements and meal replacements may also be useful in some circumstances. Where there is a demonstrated deficiency of an essential nutrient, an increased intake from food or from supplementation may help, but many athletes ignore the need for caution in supplement use and take supplements in doses that are not necessary or may even be harmful. Some supplements do offer the prospect of improved performance; these include creatine, caffeine, bicarbonate and, perhaps, a very few others. There is no evidence that prohormones such as androstenedione are effective in enhancing muscle mass or strength, and these prohormones may result in negative health consequences, as well as positive drug tests. Contamination of supplements that may cause an athlete to fail a doping test is widespread.

  4. Highly Transparent and Self-Extinguishing Nanofibrillated Cellulose-Monolayer Clay Nanoplatelet Hybrid Films.

    PubMed

    Ming, Siyi; Chen, Gang; He, Jiahao; Kuang, Yudi; Liu, Yu; Tao, Ruiqiang; Ning, Honglong; Zhu, Penghui; Liu, Yingyao; Fang, Zhiqiang

    2017-08-29

    A viable solution toward "green" optoelectronics is rooted in our ability to fabricate optoelectronics on transparent nanofibrillated cellulose (NFC) film substrates. However, the flammability of transparent NFC film poses a severe fire hazard in optoelectronic devices. Despite many efforts toward enhancing the fire-retardant features of transparent NFC film, making NFC film fire-retardant while maintaining its high transparency (≥90%) remains an ambitious objective. Herein, we combine NFC with NFC-dispersed monolayer clay nanoplatelets as a fire retardant to prepare highly transparent NFC-monolayer clay nanoplatelet hybrid films with a superb self-extinguishing behavior. Homogeneous and stable monolayer clay nanoplatelet dispersion was initially obtained by using NFC as a green dispersing agent with the assistance of ultrasonication and then used to blend with NFC to prepare highly transparent and self-extinguishing hybrid films by a water evaporation-induced self-assembly process. As the content of monolayer clay nanoplatelets increased from 5 wt % to 50 wt %, the obtained hybrid films presented enhanced self-extinguishing behavior (limiting oxygen index sharply increased from 21% to 96.5%) while retaining a ∼90% transparency at 600 nm. More significantly, the underlying mechanisms for the high transparency and excellent self-extinguishing behavior of these hybrid films with a clay nanoplatelet content of over 30 wt % were unveiled by a series of characterizations such as SEM, XRD, TGA, and limiting oxygen index tester. This work offers an alternative environmentally friendly, self-extinguishing, and highly transparent substrate to next-generation optoelectronics, and is aimed at providing a viable solution to environmental concerns that are caused by ever-increasing electronic waste.

  5. Transparent garnet ceramic scintillators for gamma-ray detection

    NASA Astrophysics Data System (ADS)

    Wang, Yimin; Baldoni, Gary; Rhodes, William H.; Brecher, Charles; Shah, Ananya; Shirwadkar, Urmila; Glodo, Jarek; Cherepy, Nerine; Payne, Stephen

    2012-10-01

    Lanthanide gallium/aluminum-based garnets have a great potential as host structures for scintillation materials for medical imaging. Particularly attractive features are their high density, chemical radiation stability and more importantly, their cubic structure and isotropic optical properties, which allow them to be fabricated into fully transparent, highperformance polycrystalline optical ceramics. Lutetium/gadolinium aluminum/gallium garnets (described by formulas ((Gd,Lu)3(Al,Ga)5O12:Ce, Gd3(Al,Ga)5O12:Ce and Lu3Al5O12:Pr)) feature high effective atomic number and good scintillation properties, which make them particularly attractive for Positron Emission Tomography (PET) and other γ- ray detection applications. The ceramic processing route offers an attractive alternative to single crystal growth for obtaining scintillator materials at relatively low temperatures and at a reasonable cost, with flexibility in dimension control as well as activator concentration adjustment. In this study, optically transparent polycrystalline ceramics mentioned above were prepared by the sintering-HIP approach, employing nano-sized starting powders. The properties and microstructures of the ceramics were controlled by varying the processing parameters during consolidation. Single-phase, high-density, transparent specimens were obtained after sintering followed by a pressure-assisted densification process, i.e. hot-isostatic-pressing. The transparent ceramics displayed high contact and distance transparency as well as high light yield as high as 60,000-65,000 ph/MeV under gamma-ray excitation, which is about 2 times that of a LSO:Ce single crystal. The excellent scintillation and optical properties make these materials promising candidates for medical imaging and γ-ray detection applications.

  6. Effect of annealing over optoelectronic properties of graphene based transparent electrodes

    NASA Astrophysics Data System (ADS)

    Yadav, Shriniwas; Kaur, Inderpreet

    2016-04-01

    Graphene, an atom-thick two dimensional graphitic material have led various fundamental breakthroughs in the field of science and technology. Due to their exceptional optical, physical and electrical properties, graphene based transparent electrodes have shown several applications in organic light emitting diodes, solar cells and thin film transistors. Here, we are presenting effect of annealing over optoelectronic properties of graphene based transparent electrodes. Graphene based transparent electrodes have been prepared by wet chemical approach over glass substrates. After fabrication, these electrodes tested for optical transmittance in visible region. Sheet resistance was measured using four probe method. Effect of thermal annealing at 200 °C was studied over optical and electrical performance of these electrodes. Optoelectronic performance was judged from ratio of direct current conductivity to optical conductivity (σdc/σopt) as a figure of merit for transparent conductors. The fabricated electrodes display good optical and electrical properties. Such electrodes can be alternatives for doped metal oxide based transparent electrodes.

  7. Water-based metamaterial absorbers for optical transparency and broadband microwave absorption

    NASA Astrophysics Data System (ADS)

    Pang, Yongqiang; Shen, Yang; Li, Yongfeng; Wang, Jiafu; Xu, Zhuo; Qu, Shaobo

    2018-04-01

    Naturally occurring water is a promising candidate for achieving broadband absorption. In this work, by virtue of the optically transparent character of the water, the water-based metamaterial absorbers (MAs) are proposed to achieve the broadband absorption at microwave frequencies and optical transparence simultaneously. For this purpose, the transparent indium tin oxide (ITO) and polymethyl methacrylate (PMMA) are chosen as the constitutive materials. The water is encapsulated between the ITO backed plate and PMMA, serving as the microwave loss as well as optically transparent material. Numerical simulations show that the broadband absorption with the efficiency over 90% in the frequency band of 6.4-30 GHz and highly optical transparency of about 85% in the visible region can be achieved and have been well demonstrated experimentally. Additionally, the proposed water-based MA displays a wide-angle absorption performance for both TE and TM waves and is also robust to the variations of the structure parameters, which is much desired in a practical application.

  8. 47 CFR 8.3 - Transparency.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... FEDERAL COMMUNICATIONS COMMISSION GENERAL PRESERVING THE OPEN INTERNET § 8.3 Transparency. A person engaged in the provision of broadband Internet access service shall publicly disclose accurate information regarding the network management practices, performance, and commercial terms of its broadband Internet...

  9. 47 CFR 8.3 - Transparency.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... FEDERAL COMMUNICATIONS COMMISSION GENERAL PRESERVING THE OPEN INTERNET § 8.3 Transparency. A person engaged in the provision of broadband Internet access service shall publicly disclose accurate information regarding the network management practices, performance, and commercial terms of its broadband Internet...

  10. 47 CFR 8.3 - Transparency.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... FEDERAL COMMUNICATIONS COMMISSION GENERAL PRESERVING THE OPEN INTERNET § 8.3 Transparency. A person engaged in the provision of broadband Internet access service shall publicly disclose accurate information regarding the network management practices, performance, and commercial terms of its broadband Internet...

  11. 47 CFR 8.3 - Transparency.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... FEDERAL COMMUNICATIONS COMMISSION GENERAL PRESERVING THE OPEN INTERNET § 8.3 Transparency. A person engaged in the provision of broadband Internet access service shall publicly disclose accurate information regarding the network management practices, performance, and commercial terms of its broadband Internet...

  12. Thin-film transistor fabricated in single-crystalline transparent oxide semiconductor.

    PubMed

    Nomura, Kenji; Ohta, Hiromichi; Ueda, Kazushige; Kamiya, Toshio; Hirano, Masahiro; Hosono, Hideo

    2003-05-23

    We report the fabrication of transparent field-effect transistors using a single-crystalline thin-film transparent oxide semiconductor, InGaO3(ZnO)5, as an electron channel and amorphous hafnium oxide as a gate insulator. The device exhibits an on-to-off current ratio of approximately 106 and a field-effect mobility of approximately 80 square centimeters per volt per second at room temperature, with operation insensitive to visible light irradiation. The result provides a step toward the realization of transparent electronics for next-generation optoelectronics.

  13. Synthesis of transparent nanocomposite monoliths for gamma scintillation

    NASA Astrophysics Data System (ADS)

    Liu, Chao; Hajagos, Tibor J.; Kishpaugh, David; Jin, Yunxia; Hu, Wei; Chen, Qi; Pei, Qibing

    2015-08-01

    During the past decade, inorganic nanoparticles/polymer nanocomposites have been intensively studied to provide a low cost, high performance alternative for gamma scintillation. However, the aggregation of nanoparticles often occurs even at low nanoparticle concentrations and thus deteriorates the transparency and performance of these nanocomposite scintillators. Here we report an efficient fabrication protocol of transparent nanocomposite monoliths based on surface modified hafnium oxide nanoparticles. Using hafnium oxide nanoparticles with surface-grafted methacrylate groups, highly transparent bulk-size nanocomposite monoliths (2 mm thick, transmittance at 550 nm >75%) are fabricated with nanoparticle loadings up to 40 wt% (net hafnium wt% up to 28.5%). These nanocomposite monoliths of 1 cm diameter and 2 mm thickness are capable of producing a full energy photopeak for 662 keV gamma rays, with the best deconvoluted photopeak energy resolution reaching 8%.

  14. Solving the Controversy on the Wetting Transparency of Graphene.

    PubMed

    Kim, Donggyu; Pugno, Nicola M; Buehler, Markus J; Ryu, Seunghwa

    2015-10-26

    Since its discovery, the wetting transparency of graphene, the transmission of the substrate wetting property over graphene coating, has gained significant attention due to its versatility for potential applications. Yet, there have been debates on the interpretation and validity of the wetting transparency. Here, we present a theory taking two previously disregarded factors into account and elucidate the origin of the partial wetting transparency. We show that the liquid bulk modulus is crucial to accurately calculate the van der Waals interactions between the liquid and the surface, and that various wetting states on rough surfaces must be considered to understand a wide range of contact angle measurements that cannot be fitted with a theory considering the flat surface. In addition, we reveal that the wetting characteristic of the substrate almost vanishes when covered by any coating as thick as graphene double layers. Our findings reveal a more complete picture of the wetting transparency of graphene as well as other atomically thin coatings, and can be applied to study various surface engineering problems requiring wettability-tuning.

  15. Solving the Controversy on the Wetting Transparency of Graphene

    PubMed Central

    Kim, Donggyu; Pugno, Nicola M.; Buehler, Markus J.; Ryu, Seunghwa

    2015-01-01

    Since its discovery, the wetting transparency of graphene, the transmission of the substrate wetting property over graphene coating, has gained significant attention due to its versatility for potential applications. Yet, there have been debates on the interpretation and validity of the wetting transparency. Here, we present a theory taking two previously disregarded factors into account and elucidate the origin of the partial wetting transparency. We show that the liquid bulk modulus is crucial to accurately calculate the van der Waals interactions between the liquid and the surface, and that various wetting states on rough surfaces must be considered to understand a wide range of contact angle measurements that cannot be fitted with a theory considering the flat surface. In addition, we reveal that the wetting characteristic of the substrate almost vanishes when covered by any coating as thick as graphene double layers. Our findings reveal a more complete picture of the wetting transparency of graphene as well as other atomically thin coatings, and can be applied to study various surface engineering problems requiring wettability-tuning. PMID:26496835

  16. Impact of data transparency: Scientific publications

    PubMed Central

    Joshi, Mohit; Bhardwaj, Payal

    2018-01-01

    Data transparency has been an important aspect of medical research as it helps in enabling evidence-based decisions in medicine which leads to foster trust among the patients and research community alike. Currently, it is one of the key talking points owing to a number of initiatives taken by the pharmaceutical organizations, regulatory bodies, and the other decision enablers of the industry. Thanks to this, there are a number of ways by which a single piece of datum is available through multiple access points, namely, clinical trial disclosures (CTDs), clinical study reports (CSRs), plain language summaries, and scientific publications including abstracts, posters, and manuscripts, to name a few. This may pose a burden of documentation on the pharmaceutical organizations, demanding downsizing of medical writing documents. Since CTDs, CSRs, and other regulatory document are more or less template driven; there may not be much scope to interfere with their structure and submission timings. Scientific publications, on the other hand, provide the flexibility of presenting the clinical data that is typically not dependent on a particular format and timelines. The present paper discusses how the upcoming data transparency initiatives could affect the publication practices across the pharmaceutical industry and what could pharmaceutical companies do to get the maximum benefit out of the data transparency initiatives. PMID:29430415

  17. Impact of data transparency: Scientific publications.

    PubMed

    Joshi, Mohit; Bhardwaj, Payal

    2018-01-01

    Data transparency has been an important aspect of medical research as it helps in enabling evidence-based decisions in medicine which leads to foster trust among the patients and research community alike. Currently, it is one of the key talking points owing to a number of initiatives taken by the pharmaceutical organizations, regulatory bodies, and the other decision enablers of the industry. Thanks to this, there are a number of ways by which a single piece of datum is available through multiple access points, namely, clinical trial disclosures (CTDs), clinical study reports (CSRs), plain language summaries, and scientific publications including abstracts, posters, and manuscripts, to name a few. This may pose a burden of documentation on the pharmaceutical organizations, demanding downsizing of medical writing documents. Since CTDs, CSRs, and other regulatory document are more or less template driven; there may not be much scope to interfere with their structure and submission timings. Scientific publications, on the other hand, provide the flexibility of presenting the clinical data that is typically not dependent on a particular format and timelines. The present paper discusses how the upcoming data transparency initiatives could affect the publication practices across the pharmaceutical industry and what could pharmaceutical companies do to get the maximum benefit out of the data transparency initiatives.

  18. Wave-mixing-induced transparency with zero phase shift in atomic vapors

    NASA Astrophysics Data System (ADS)

    Zhou, F.; Zhu, C. J.; Li, Y.

    2017-12-01

    We present a wave-mixing induced transparency that can lead to a hyper-Raman gain-clamping effect. This new type of transparency is originated from a dynamic gain cancellation effect in a multiphoton process where a highly efficient light field of new frequency is generated and amplified. We further show that this novel dynamic gain cancellation effect not only makes the medium transparent to a probe light field at appropriate frequency but also eliminates the probe field propagation phase shift. This gain-cancellation-based induced transparency holds for many potential applications on optical communication and may lead to effective suppression of parasitic Raman/hyper-Raman noise field generated in high intensity optical fiber transmissions.

  19. Design Parameters for Subwavelength Transparent Conductive Nanolattices

    DOE PAGES

    Diaz Leon, Juan J.; Feigenbaum, Eyal; Kobayashi, Nobuhiko P.; ...

    2017-09-29

    Recent advancements with the directed assembly of block copolymers have enabled the fabrication over cm 2 areas of highly ordered metal nanowire meshes, or nanolattices, which are of significant interest as transparent electrodes. Compared to randomly dispersed metal nanowire networks that have long been considered the most promising next-generation transparent electrode material, such ordered nanolattices represent a new design paradigm that is yet to be optimized. Here in this paper, through optical and electrical simulations, we explore the potential design parameters for such nanolattices as transparent conductive electrodes, elucidating relationships between the nanowire dimensions, defects, and the nanolattices’ conductivity andmore » transmissivity. We find that having an ordered nanowire network significantly decreases the length of nanowires required to attain both high transmissivity and high conductivity, and we quantify the network’s tolerance to defects in relation to other design constraints. Furthermore, we explore how both optical and electrical anisotropy can be introduced to such nanolattices, opening an even broader materials design space and possible set of applications.« less

  20. Graphene-Based Flexible and Transparent Tunable Capacitors.

    PubMed

    Man, Baoyuan; Xu, Shicai; Jiang, Shouzheng; Liu, Aihua; Gao, Shoubao; Zhang, Chao; Qiu, Hengwei; Li, Zhen

    2015-12-01

    We report a kind of electric field tunable transparent and flexible capacitor with the structure of graphene-Bi1.5MgNb1.5O7 (BMN)-graphene. The graphene films with low sheet resistance were grown by chemical vapor deposition. The BMN thin films were fabricated on graphene by using laser molecular beam epitaxy technology. Compared to BMN films grown on Au, the samples on graphene substrates show better quality in terms of crystallinity, surface morphology, leakage current, and loss tangent. By transferring another graphene layer, we fabricated flexible and transparent capacitors with the structure of graphene-BMN-graphene. The capacitors show a large dielectric constant of 113 with high dielectric tunability of ~40.7 % at a bias field of 1.0 MV/cm. Also, the capacitor can work stably in the high bending condition with curvature radii as low as 10 mm. This flexible film capacitor has a high optical transparency of ~90 % in the visible light region, demonstrating their potential application for a wide range of flexible electronic devices.

  1. Design Parameters for Subwavelength Transparent Conductive Nanolattices

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Diaz Leon, Juan J.; Feigenbaum, Eyal; Kobayashi, Nobuhiko P.

    Recent advancements with the directed assembly of block copolymers have enabled the fabrication over cm 2 areas of highly ordered metal nanowire meshes, or nanolattices, which are of significant interest as transparent electrodes. Compared to randomly dispersed metal nanowire networks that have long been considered the most promising next-generation transparent electrode material, such ordered nanolattices represent a new design paradigm that is yet to be optimized. Here in this paper, through optical and electrical simulations, we explore the potential design parameters for such nanolattices as transparent conductive electrodes, elucidating relationships between the nanowire dimensions, defects, and the nanolattices’ conductivity andmore » transmissivity. We find that having an ordered nanowire network significantly decreases the length of nanowires required to attain both high transmissivity and high conductivity, and we quantify the network’s tolerance to defects in relation to other design constraints. Furthermore, we explore how both optical and electrical anisotropy can be introduced to such nanolattices, opening an even broader materials design space and possible set of applications.« less

  2. Transparent and Self-Supporting Graphene Films with Wrinkled- Graphene-Wall-Assembled Opening Polyhedron Building Blocks for High Performance Flexible/Transparent Supercapacitors.

    PubMed

    Li, Na; Huang, Xuankai; Zhang, Haiyan; Li, Yunyong; Wang, Chengxin

    2017-03-22

    Improving mass loading while maintaining high transparency and large surface area in one self-supporting graphene film is still a challenge. Unfortunately, all of these factors are absolutely essential for enhancing the energy storage performance of transparent supercapacitors for practical applications. To solve the above bottleneck problem, we produce a novel self-supporting flexible and transparent graphene film (STF-GF) with wrinkled-wall-assembled opened-hollow polyhedron building units. Taking advantage of the microscopic morphology, the STF-GF exhibits improved mass loading with high transmittance (70.2% at 550 nm), a large surface area (1105.6 m 2 /g), and good electrochemical performance: high energy (552.3 μWh/cm 3 ), power densities (561.9 mW/cm 3 ), a superlong cycle life, and good cycling stability (the capacitance retention is ∼94.8% after 20,000 cycles).

  3. The Saga of Ihu Nui Economic Man [and] Teacher's Guide.

    ERIC Educational Resources Information Center

    Jackstadt, Steve; Mak, Jim

    This student book and companion teacher's guide can be used to teach Hawaiian economic history at the 11th and 12th grade levels. The student book, which can be used as a basic text or as a supplement to other materials, consists of nine episodes. For each episode there is a comic strip and a narrative summary which students are expected to read.…

  4. Complementarity in dietary supplements and foods: are supplement users vegetable eaters?

    PubMed

    Kang, Hyoung-Goo; Joo, Hailey Hayeon; Choi, Kyong Duk; Lee, Dongmin; Moon, Junghoon

    2017-01-01

    Background : The consumption of fruits, vegetables, and dietary supplements correlate. Most previous studies have aimed to identify the determinants of supplement uses or the distinct features of supplement users; this literature lacks a discussion on dietary supplement consumption as a predictor of fruit and vegetable consumption. Objective : This study examines how dietary supplement consumption correlates with fruit and vegetable consumption by combining scanner data and surveys of Korean household grocery shopping. Methods : Propensity score matching (PSM) is used to identify the relationship between dietary supplement consumption and fruit and vegetable consumption in a household. A logit regression using supplement consumption as the dependent variable is used. Then, the supplement takers (the treatment group) are matched with non-takers (the control group) based on the propensity scores estimated in the logit regression. The fruit and vegetable consumption levels of the groups are then compared. Results : We found that dietary supplement use is associated with higher fruit and vegetable consumption. This supports the health consciousness hypothesis based on attention bias, availability heuristics, the focusing effect, and the consumption episode effect. It rejects the health substitute hypothesis based on economic substitutes and mental accounting. Conclusions : Future research on the health benefits of dietary supplements should address the complementary consumption of fruits/vegetables and their health benefits to avoid misstating the health effects of supplements.

  5. Complementarity in dietary supplements and foods: are supplement users vegetable eaters?

    PubMed Central

    Kang, Hyoung-Goo; Joo, Hailey Hayeon; Choi, Kyong Duk; Lee, Dongmin; Moon, Junghoon

    2017-01-01

    ABSTRACT Background: The consumption of fruits, vegetables, and dietary supplements correlate. Most previous studies have aimed to identify the determinants of supplement uses or the distinct features of supplement users; this literature lacks a discussion on dietary supplement consumption as a predictor of fruit and vegetable consumption. Objective: This study examines how dietary supplement consumption correlates with fruit and vegetable consumption by combining scanner data and surveys of Korean household grocery shopping. Methods: Propensity score matching (PSM) is used to identify the relationship between dietary supplement consumption and fruit and vegetable consumption in a household. A logit regression using supplement consumption as the dependent variable is used. Then, the supplement takers (the treatment group) are matched with non-takers (the control group) based on the propensity scores estimated in the logit regression. The fruit and vegetable consumption levels of the groups are then compared. Results: We found that dietary supplement use is associated with higher fruit and vegetable consumption. This supports the health consciousness hypothesis based on attention bias, availability heuristics, the focusing effect, and the consumption episode effect. It rejects the health substitute hypothesis based on economic substitutes and mental accounting. Conclusions: Future research on the health benefits of dietary supplements should address the complementary consumption of fruits/vegetables and their health benefits to avoid misstating the health effects of supplements. PMID:28904529

  6. Orthographic Transparency Enhances Morphological Segmentation in Children Reading Hebrew Words.

    PubMed

    Haddad, Laurice; Weiss, Yael; Katzir, Tami; Bitan, Tali

    2017-01-01

    Morphological processing of derived words develops simultaneously with reading acquisition. However, the reader's engagement in morphological segmentation may depend on the language morphological richness and orthographic transparency, and the readers' reading skills. The current study tested the common idea that morphological segmentation is enhanced in non-transparent orthographies to compensate for the absence of phonological information. Hebrew's rich morphology and the dual version of the Hebrew script (with and without diacritic marks) provides an opportunity to study the interaction of orthographic transparency and morphological segmentation on the development of reading skills in a within-language design. Hebrew speaking 2nd ( N = 27) and 5th ( N = 29) grade children read aloud 96 noun words. Half of the words were simple mono-morphemic words and half were bi-morphemic derivations composed of a productive root and a morphemic pattern. In each list half of the words were presented in the transparent version of the script (with diacritic marks), and half in the non-transparent version (without diacritic marks). Our results show that in both groups, derived bi-morphemic words were identified more accurately than mono-morphemic words, but only for the transparent, pointed, script. For the un-pointed script the reverse was found, namely, that bi-morphemic words were read less accurately than mono-morphemic words, especially in second grade. Second grade children also read mono-morphemic words faster than bi-morphemic words. Finally, correlations with a standardized measure of morphological awareness were found only for second grade children, and only in bi-morphemic words. These results, showing greater morphological effects in second grade compared to fifth grade children suggest that for children raised in a language with a rich morphology, common and easily segmented morphemic units may be more beneficial for younger compared to older readers. Moreover, in

  7. Orthographic Transparency Enhances Morphological Segmentation in Children Reading Hebrew Words

    PubMed Central

    Haddad, Laurice; Weiss, Yael; Katzir, Tami; Bitan, Tali

    2018-01-01

    Morphological processing of derived words develops simultaneously with reading acquisition. However, the reader’s engagement in morphological segmentation may depend on the language morphological richness and orthographic transparency, and the readers’ reading skills. The current study tested the common idea that morphological segmentation is enhanced in non-transparent orthographies to compensate for the absence of phonological information. Hebrew’s rich morphology and the dual version of the Hebrew script (with and without diacritic marks) provides an opportunity to study the interaction of orthographic transparency and morphological segmentation on the development of reading skills in a within-language design. Hebrew speaking 2nd (N = 27) and 5th (N = 29) grade children read aloud 96 noun words. Half of the words were simple mono-morphemic words and half were bi-morphemic derivations composed of a productive root and a morphemic pattern. In each list half of the words were presented in the transparent version of the script (with diacritic marks), and half in the non-transparent version (without diacritic marks). Our results show that in both groups, derived bi-morphemic words were identified more accurately than mono-morphemic words, but only for the transparent, pointed, script. For the un-pointed script the reverse was found, namely, that bi-morphemic words were read less accurately than mono-morphemic words, especially in second grade. Second grade children also read mono-morphemic words faster than bi-morphemic words. Finally, correlations with a standardized measure of morphological awareness were found only for second grade children, and only in bi-morphemic words. These results, showing greater morphological effects in second grade compared to fifth grade children suggest that for children raised in a language with a rich morphology, common and easily segmented morphemic units may be more beneficial for younger compared to older readers. Moreover

  8. Exploiting both optical and electrical anisotropy in nanowire electrodes for higher transparency.

    PubMed

    Dong, Jianjin; Goldthorpe, Irene A

    2018-01-26

    Transparent electrodes such as indium tin oxide and random meshes of silver nanowires (AgNWs) have isotropic in-plane properties. However, we show that imparting some alignment to AgNWs can create anisotropic transparency and electrical conductivity characteristics that may benefit many applications. For example, liquid crystal displays and the touch sensors on top of them often only need to be transparent to one type of polarized light as well as predominantly conductive in only one direction. Herein, AgNWs are slightly preferentially aligned during their deposition by rod coating. Compared to randomly oriented AgNW films, the alignment boosts the transparency to perpendicularly polarized light, as well as achieves a higher transparency for a given sheet resistance in one direction compared to randomly oriented AgNWs films. These factors together increase the transparency of a 16 Ω/sq electrode by 7.3 percentage points. The alignment technique is cheap and scalable, compatible with roll-to-roll processes, and most importantly does not require extra processing steps, as rod coating is already a standard process for AgNW electrode fabrication.

  9. Exploiting both optical and electrical anisotropy in nanowire electrodes for higher transparency

    NASA Astrophysics Data System (ADS)

    Dong, Jianjin; Goldthorpe, Irene A.

    2018-01-01

    Transparent electrodes such as indium tin oxide and random meshes of silver nanowires (AgNWs) have isotropic in-plane properties. However, we show that imparting some alignment to AgNWs can create anisotropic transparency and electrical conductivity characteristics that may benefit many applications. For example, liquid crystal displays and the touch sensors on top of them often only need to be transparent to one type of polarized light as well as predominantly conductive in only one direction. Herein, AgNWs are slightly preferentially aligned during their deposition by rod coating. Compared to randomly oriented AgNW films, the alignment boosts the transparency to perpendicularly polarized light, as well as achieves a higher transparency for a given sheet resistance in one direction compared to randomly oriented AgNWs films. These factors together increase the transparency of a 16 Ω/sq electrode by 7.3 percentage points. The alignment technique is cheap and scalable, compatible with roll-to-roll processes, and most importantly does not require extra processing steps, as rod coating is already a standard process for AgNW electrode fabrication.

  10. Transparent air filter for high-efficiency PM2.5 capture.

    PubMed

    Liu, Chong; Hsu, Po-Chun; Lee, Hyun-Wook; Ye, Meng; Zheng, Guangyuan; Liu, Nian; Li, Weiyang; Cui, Yi

    2015-02-16

    Particulate matter (PM) pollution has raised serious concerns for public health. Although outdoor individual protection could be achieved by facial masks, indoor air usually relies on expensive and energy-intensive air-filtering devices. Here, we introduce a transparent air filter for indoor air protection through windows that uses natural passive ventilation to effectively protect the indoor air quality. By controlling the surface chemistry to enable strong PM adhesion and also the microstructure of the air filters to increase the capture possibilities, we achieve transparent, high air flow and highly effective air filters of ~90% transparency with >95.00% removal of PM2.5 under extreme hazardous air-quality conditions (PM2.5 mass concentration >250 μg m(-3)). A field test in Beijing shows that the polyacrylonitrile transparent air filter has the best PM2.5 removal efficiency of 98.69% at high transmittance of ~77% during haze occurrence.

  11. Transparent air filter for high-efficiency PM2.5 capture

    NASA Astrophysics Data System (ADS)

    Liu, Chong; Hsu, Po-Chun; Lee, Hyun-Wook; Ye, Meng; Zheng, Guangyuan; Liu, Nian; Li, Weiyang; Cui, Yi

    2015-02-01

    Particulate matter (PM) pollution has raised serious concerns for public health. Although outdoor individual protection could be achieved by facial masks, indoor air usually relies on expensive and energy-intensive air-filtering devices. Here, we introduce a transparent air filter for indoor air protection through windows that uses natural passive ventilation to effectively protect the indoor air quality. By controlling the surface chemistry to enable strong PM adhesion and also the microstructure of the air filters to increase the capture possibilities, we achieve transparent, high air flow and highly effective air filters of ~90% transparency with >95.00% removal of PM2.5 under extreme hazardous air-quality conditions (PM2.5 mass concentration >250 μg m-3). A field test in Beijing shows that the polyacrylonitrile transparent air filter has the best PM2.5 removal efficiency of 98.69% at high transmittance of ~77% during haze occurrence.

  12. Two-dimensional materials based transparent flexible electronics

    NASA Astrophysics Data System (ADS)

    Yu, Lili; Ha, Sungjae; El-Damak, Dina; McVay, Elaine; Ling, Xi; Chandrakasan, Anantha; Kong, Jing; Palacios, Tomas

    2015-03-01

    Two-dimensional (2D) materials have generated great interest recently as a set of tools for electronics, as these materials can push electronics beyond traditional boundaries. These materials and their heterostructures offer excellent mechanical flexibility, optical transparency, and favorable transport properties for realizing electronic, sensing, and optical systems on arbitrary surfaces. These thin, lightweight, bendable, highly rugged and low-power devices may bring dramatic changes in information processing, communications and human-electronic interaction. In this report, for the first time, we demonstrate two complex transparent flexible systems based on molybdenum disulfide (MoS2) grown by chemical vapor method: a transparent active-matrix organic light-emitting diode (AMOLED) display and a MoS2 wireless link for sensor nodes. The 1/2 x 1/2 square inch, 4 x 5 pixels AMOLED structures are built on transparent substrates, containing MoS2 back plane circuit and OLEDs integrated on top of it. The back plane circuit turns on and off the individual pixel with two MoS2 transistors and a capacitor. The device is designed and fabricated based on SPICE simulation to achieve desired DC and transient performance. We have also demonstrated a MoS2 wireless self-powered sensor node. The system consists of as energy harvester, rectifier, sensor node and logic units. AC signals from the environment, such as near-field wireless power transfer, piezoelectric film and RF signal, are harvested, then rectified into DC signal by a MoS2 diode. CIQM, CICS, SRC.

  13. 75 FR 26916 - Federal Acquisition Regulation: FAR Case 2009-004, Enhancing Contract Transparency

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-13

    ... Regulation: FAR Case 2009-004, Enhancing Contract Transparency AGENCY: Department of Defense (DoD), General... commercial or financial information. This transparency effort is intended to promote efficiency in Government... the Administration's memorandum entitled Transparency and Open Government (January 21, 2009...

  14. Intelligent Agent Transparency in Human-Agent Teaming for Multi-UxV Management.

    PubMed

    Mercado, Joseph E; Rupp, Michael A; Chen, Jessie Y C; Barnes, Michael J; Barber, Daniel; Procci, Katelyn

    2016-05-01

    We investigated the effects of level of agent transparency on operator performance, trust, and workload in a context of human-agent teaming for multirobot management. Participants played the role of a heterogeneous unmanned vehicle (UxV) operator and were instructed to complete various missions by giving orders to UxVs through a computer interface. An intelligent agent (IA) assisted the participant by recommending two plans-a top recommendation and a secondary recommendation-for every mission. A within-subjects design with three levels of agent transparency was employed in the present experiment. There were eight missions in each of three experimental blocks, grouped by level of transparency. During each experimental block, the IA was incorrect three out of eight times due to external information (e.g., commander's intent and intelligence). Operator performance, trust, workload, and usability data were collected. Results indicate that operator performance, trust, and perceived usability increased as a function of transparency level. Subjective and objective workload data indicate that participants' workload did not increase as a function of transparency. Furthermore, response time did not increase as a function of transparency. Unlike previous research, which showed that increased transparency resulted in increased performance and trust calibration at the cost of greater workload and longer response time, our results support the benefits of transparency for performance effectiveness without additional costs. The current results will facilitate the implementation of IAs in military settings and will provide useful data to the design of heterogeneous UxV teams. © 2016, Human Factors and Ergonomics Society.

  15. Fused Silica and Other Transparent Window Materials

    NASA Technical Reports Server (NTRS)

    Salem, Jon

    2016-01-01

    Several transparent ceramics, such as spinel and AlONs are now being produced in sufficient large areas to be used in space craft window applications. The work horse transparent material for space missions from Apollo to the International Space Station has been fused silica due in part to its low coefficient of expansion and optical quality. Despite its successful use, fused silica exhibits anomalies in its crack growth behavior, depending on environmental preconditioning and surface damage. This presentation will compare recent optical ceramics to fused silica and discuss sources of variation in slow crack growth behavior.

  16. Improved thermal oxidation stability of solution-processable silver nanowire transparent electrode by reduced graphene oxide.

    PubMed

    Ahn, Yumi; Jeong, Youngjun; Lee, Youngu

    2012-12-01

    Solution-processable silver nanowire-reduced graphene oxide (AgNW-rGO) hybrid transparent electrode was prepared in order to replace conventional ITO transparent electrode. AgNW-rGO hybrid transparent electrode exhibited high optical transmittance and low sheet resistance, which is comparable to ITO transparent electrode. In addition, it was found that AgNW-rGO hybrid transparent electrode exhibited highly enhanced thermal oxidation and chemical stabilities due to excellent gas-barrier property of rGO passivation layer onto AgNW film. Furthermore, the organic solar cells with AgNW-rGO hybrid transparent electrode showed good photovoltaic behavior as much as solar cells with AgNW transparent electrode. It is expected that AgNW-rGO hybrid transparent electrode can be used as a key component in various optoelectronic application such as display panels, touch screen panels, and solar cells.

  17. A Taste of English: Nutrition Workbook for Adult ESL Students. Teacher's Manual.

    ERIC Educational Resources Information Center

    Association of Farmworker Opportunity Program, Arlington, VA.

    This workbook introduces basic concepts of nutrition and health to beginning adult students of English as a Second Language (ESL). The text may also be adapted for use with new readers. It is intended as a supplement to existing instructional materials. An introductory section offers teachers suggestions for use of the text and notes on the design…

  18. Broadband polarization-independent and low-profile optically transparent metamaterial absorber

    NASA Astrophysics Data System (ADS)

    Li, Long; Xi, Rui; Liu, Haixia; Lv, Zhiyong

    2018-05-01

    A transparent metamaterial absorber with simultaneously high optical transparency and broadband microwave absorption is presented in this paper. Consisting of a two-layer soda-lime glass substrate and three-layer patch-shaped indium tin oxide (ITO) films, the proposed absorber has advantages of broadband absorption with an absorptivity higher than 85% in the range from 6.1 to 22.1 GHz, good polarization insensitiveness, a high transparency, a low profile, and wide-incident-angle stability. A prototype of the proposed absorber is fabricated and experimentally measured to demonstrate its excellent performance. The measured results agree well with the theoretical design and numerical simulations.

  19. Transparent, flexible, and solid-state supercapacitors based on graphene electrodes

    NASA Astrophysics Data System (ADS)

    Gao, Y.; Zhou, Y. S.; Xiong, W.; Jiang, L. J.; Mahjouri-samani, M.; Thirugnanam, P.; Huang, X.; Wang, M. M.; Jiang, L.; Lu, Y. F.

    2013-07-01

    In this study, graphene-based supercapacitors with optical transparency and mechanical flexibility have been achieved using a combination of poly(vinyl alcohol)/phosphoric acid gel electrolyte and graphene electrodes. An optical transmittance of ˜67% in a wavelength range of 500-800 nm and a 92.4% remnant capacitance under a bending angle of 80° have been achieved for the supercapacitors. The decrease in capacitance under bending is ascribed to the buckling of the graphene electrode in compression. The supercapacitors with high optical transparency, electrochemical stability, and mechanical flexibility hold promises for transparent and flexible electronics.

  20. Situation awareness-based agent transparency for human-autonomy teaming effectiveness

    NASA Astrophysics Data System (ADS)

    Chen, Jessie Y. C.; Barnes, Michael J.; Wright, Julia L.; Stowers, Kimberly; Lakhmani, Shan G.

    2017-05-01

    We developed the Situation awareness-based Agent Transparency (SAT) model to support human operators' situation awareness of the mission environment through teaming with intelligent agents. The model includes the agent's current actions and plans (Level 1), its reasoning process (Level 2), and its projection of future outcomes (Level 3). Human-inthe-loop simulation experiments have been conducted (Autonomous Squad Member and IMPACT) to illustrate the utility of the model for human-autonomy team interface designs. Across studies, the results consistently showed that human operators' task performance improved as the agents became more transparent. They also perceived transparent agents as more trustworthy.

  1. Two-Channel Transparency-Optimized Control Architectures in Bilateral Teleoperation With Time Delay.

    PubMed

    Kim, Jonghyun; Chang, Pyung Hun; Park, Hyung-Soon

    2013-01-01

    This paper introduces transparency-optimized control architectures (TOCAs) using two communication channels. Two classes of two-channel TOCAs are found, thereby showing that two channels are sufficient to achieve transparency. These TOCAs achieve a greater level of transparency but poorer stability than three-channel TOCAs and four-channel TOCAs. Stability of the two-channel TOCAs has been enhanced while minimizing transparency degradation by adding a filter; and a combined use of the two classes of two-channel TOCAs is proposed for both free space and constrained motion, which involve switching between two TOCAs for transition between free space and constrained motions. The stability condition of the switched teleoperation system is derived for practical applications. Through the one degree-of-freedom (DOF) experiment, the proposed two-channel TOCAs were shown to operate stably, while achieving better transparency under time delay than the other TOCAs.

  2. Exploring Potential Uses of ICT in Chinese Language Arts Instruction: Eight Teachers' Perspectives

    ERIC Educational Resources Information Center

    Lin, Janet Mei-Chuen; Lee, Greg C.; Chen, Hsiu-Yen

    2004-01-01

    Eight experienced Chinese language arts teachers from a typical junior high school in Taiwan participated in this study to discuss the potential uses of information and communications technologies (ICT) in Chinese language arts instruction. After meeting for 12 roundtable sessions and using a web forum as a supplement for exchanging ideas, they…

  3. Space Mathematics, A Resource for Teachers Outlining Supplementary Space-Related Problems in Mathematics.

    ERIC Educational Resources Information Center

    Reynolds, Thomas D.; And Others

    This compilation of 138 problems illustrating applications of high school mathematics to various aspects of space science is intended as a resource from which the teacher may select questions to supplement his regular course. None of the problems require a knowledge of calculus or physics, and solutions are presented along with the problem…

  4. Projection transparencies from printed material

    NASA Technical Reports Server (NTRS)

    Grunewald, L. S.; Nickerson, T. B.

    1968-01-01

    Method for preparing project transparencies, or view graphs, permits the use of almost any expendable printed material, pictures, charts, or text, in unlimited color or black and white. The method can be accomplished by either of two techniques, with a slight difference in materials.

  5. Developing the Surface Chemistry of Transparent Butyl Rubber for Impermeable Stretchable Electronics.

    PubMed

    Vohra, Akhil; Carmichael, R Stephen; Carmichael, Tricia Breen

    2016-10-11

    Transparent butyl rubber is a new elastomer that has the potential to revolutionize stretchable electronics due to its intrinsically low gas permeability. Encapsulating organic electronic materials and devices with transparent butyl rubber protects them from problematic degradation due to oxygen and moisture, preventing premature device failure and enabling the fabrication of stretchable organic electronic devices with practical lifetimes. Here, we report a methodology to alter the surface chemistry of transparent butyl rubber to advance this material from acting as a simple device encapsulant to functioning as a substrate primed for direct device fabrication on its surface. We demonstrate a combination of plasma and chemical treatment to deposit a hydrophilic silicate layer on the transparent butyl rubber surface to create a new layered composite that combines Si-OH surface chemistry with the favorable gas-barrier properties of bulk transparent butyl rubber. We demonstrate that these surface Si-OH groups react with organosilanes to form self-assembled monolayers necessary for the deposition of electronic materials, and furthermore demonstrate the fabrication of stretchable gold wires using nanotransfer printing of gold films onto transparent butyl rubber modified with a thiol-terminated self-assembled monolayer. The surface modification of transparent butyl rubber establishes this material as an important new elastomer for stretchable electronics and opens the way to robust, stretchable devices.

  6. Direct ink write fabrication of transparent ceramic gain media

    NASA Astrophysics Data System (ADS)

    Jones, Ivy Krystal; Seeley, Zachary M.; Cherepy, Nerine J.; Duoss, Eric B.; Payne, Stephen A.

    2018-01-01

    Solid-state laser gain media based on the garnet structure with two spatially distinct but optically contiguous regions have been fabricated. Transparent gain media comprised of a central core of Y2.97Nd0.03Al5.00O12.00 (Nd:YAG) and an undoped cladding region of Y3Al5O12 (YAG) were fabricated by direct ink write and transparent ceramic processing. Direct ink write (DIW) was employed to form the green body, offering a general route to preparing functionally structured solid-state laser gain media. Fully-dense transparent optical ceramics in a "top hat" geometry with YAG/Nd:YAG have been fabricated by DIW methods with optical scatter at 1064 nm of <3%/cm.

  7. Direct ink write fabrication of transparent ceramic gain media

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jones, Ivy Krystal; Seeley, Zachary M.; Cherepy, Nerine J.

    Solid-state laser gain media based on the garnet structure with two spatially distinct but optically contiguous regions have been fabricated. Transparent gain media comprised of a central core of Y 2.97Nd 0.03Al 5.00O 12.00 (Nd:YAG) and an undoped cladding region of Y 3Al 5O 12 (YAG) were fabricated by direct ink write and transparent ceramic processing. Direct ink write (DIW) was employed to form the green body, offering a general route to preparing functionally structured solid-state laser gain media. Lastly, fully-dense transparent optical ceramics in a “top hat” geometry with YAG/Nd:YAG have been fabricated by DIW methods with optical scattermore » at 1064 nm of <3%/cm.« less

  8. Direct ink write fabrication of transparent ceramic gain media

    DOE PAGES

    Jones, Ivy Krystal; Seeley, Zachary M.; Cherepy, Nerine J.; ...

    2018-11-06

    Solid-state laser gain media based on the garnet structure with two spatially distinct but optically contiguous regions have been fabricated. Transparent gain media comprised of a central core of Y 2.97Nd 0.03Al 5.00O 12.00 (Nd:YAG) and an undoped cladding region of Y 3Al 5O 12 (YAG) were fabricated by direct ink write and transparent ceramic processing. Direct ink write (DIW) was employed to form the green body, offering a general route to preparing functionally structured solid-state laser gain media. Lastly, fully-dense transparent optical ceramics in a “top hat” geometry with YAG/Nd:YAG have been fabricated by DIW methods with optical scattermore » at 1064 nm of <3%/cm.« less

  9. Flexible transparent and free-standing silicon nanowires paper.

    PubMed

    Pang, Chunlei; Cui, Hao; Yang, Guowei; Wang, Chengxin

    2013-10-09

    If the flexible transparent and free-standing paper-like materials that would be expected to meet emerging technological demands, such as components of transparent electrical batteries, flexible solar cells, bendable electronics, paper displays, wearable computers, and so on, could be achieved in silicon, it is no doubt that the traditional semiconductor materials would be rejuvenated. Bulk silicon cannot provide a solution because it usually exhibits brittleness at below their melting point temperature due to high Peierls stress. Fortunately, when the silicon's size goes down to nanoscale, it possesses the ultralarge straining ability, which results in the possibility to design flexible transparent and self-standing silicon nanowires paper (FTS-SiNWsP). However, realization of the FTS-SiNWsP is still a challenging task due largely to the subtlety in the preparation of a unique interlocking alignment with free-catalyst controllable growth. Herein, we present a simple synthetic strategy by gas flow directed assembly of a unique interlocking alignment of the Si nanowires (SiNWs) to produce, for the first time, the FTS-SiNWsP, which consisted of interconnected SiNWs with the diameter of ~10 nm via simply free-catalyst thermal evaporation in a vertical high-frequency induction furnace. This approach opens up the possibility for creating various flexible transparent functional devices based on the FTS-SiNWsP.

  10. Transparency of near-critical density plasmas under extreme laser intensities

    NASA Astrophysics Data System (ADS)

    Ji, Liangliang; Shen, Baifei; Zhang, Xiaomei

    2018-05-01

    We investigated transparency of near-critical plasma targets for highly intense incident lasers and discovered that beyond relativistic transparency, there exists an anomalous opacity regime, where the plasma target tend to be opaque at extreme light intensities. The unexpected phenomenon is found to originate from the trapping of ions under exotic conditions. We found out the propagation velocity and the amplitude of the laser-driven charge separation field in a large parameter range and derived the trapping probability of ions. The model successfully interpolates the emergence of anomalous opacity in simulations. The trend is more significant when radiation reaction comes into effect, leaving a transparency window in the intensity domain. Transparency of a plasma target defines the electron dynamics and thereby the emission mechanisms of gamma-photons in the ultra-relativistic regime. Our findings are not only of fundamental interest but also imply the proper mechanisms for generating desired electron/gamma sources.

  11. Magnetic assembly of transparent and conducting graphene-based functional composites

    NASA Astrophysics Data System (ADS)

    Le Ferrand, Hortense; Bolisetty, Sreenath; Demirörs, Ahmet F.; Libanori, Rafael; Studart, André R.; Mezzenga, Raffaele

    2016-06-01

    Innovative methods producing transparent and flexible electrodes are highly sought in modern optoelectronic applications to replace metal oxides, but available solutions suffer from drawbacks such as brittleness, unaffordability and inadequate processability. Here we propose a general, simple strategy to produce hierarchical composites of functionalized graphene in polymeric matrices, exhibiting transparency and electron conductivity. These are obtained through protein-assisted functionalization of graphene with magnetic nanoparticles, followed by magnetic-directed assembly of the graphene within polymeric matrices undergoing sol-gel transitions. By applying rotating magnetic fields or magnetic moulds, both graphene orientation and distribution can be controlled within the composite. Importantly, by using magnetic virtual moulds of predefined meshes, graphene assembly is directed into double-percolating networks, reducing the percolation threshold and enabling combined optical transparency and electrical conductivity not accessible in single-network materials. The resulting composites open new possibilities on the quest of transparent electrodes for photovoltaics, organic light-emitting diodes and stretchable optoelectronic devices.

  12. Magnetic assembly of transparent and conducting graphene-based functional composites

    PubMed Central

    Le Ferrand, Hortense; Bolisetty, Sreenath; Demirörs, Ahmet F.; Libanori, Rafael; Studart, André R.; Mezzenga, Raffaele

    2016-01-01

    Innovative methods producing transparent and flexible electrodes are highly sought in modern optoelectronic applications to replace metal oxides, but available solutions suffer from drawbacks such as brittleness, unaffordability and inadequate processability. Here we propose a general, simple strategy to produce hierarchical composites of functionalized graphene in polymeric matrices, exhibiting transparency and electron conductivity. These are obtained through protein-assisted functionalization of graphene with magnetic nanoparticles, followed by magnetic-directed assembly of the graphene within polymeric matrices undergoing sol–gel transitions. By applying rotating magnetic fields or magnetic moulds, both graphene orientation and distribution can be controlled within the composite. Importantly, by using magnetic virtual moulds of predefined meshes, graphene assembly is directed into double-percolating networks, reducing the percolation threshold and enabling combined optical transparency and electrical conductivity not accessible in single-network materials. The resulting composites open new possibilities on the quest of transparent electrodes for photovoltaics, organic light-emitting diodes and stretchable optoelectronic devices. PMID:27354243

  13. A Qualitative Analysis of Ninth Grade High School Teachers' Perceptions of Online Discussions to Supplement Classroom Instruction

    ERIC Educational Resources Information Center

    Watson, Rhonda

    2015-01-01

    Current web technologies are changing the landscape of education. Today's students communicate and learn differently than those of previous generations, yet a gap still exists between available technology and teacher use of technology for instruction. The purpose of this qualitative descriptive case study was to examine teachers' perceptions of…

  14. Federal Funding Accountability and Transparency Act

    EPA Pesticide Factsheets

    Public Law 109-282, the Federal Funding Accountability and Transparency Act of 2006 as amended (FFATA), requires disclosure of all entities and organizations receiving Federal funds through a single publicly accessible website.

  15. Corneal structure and transparency

    PubMed Central

    Meek, Keith M.; Knupp, Carlo

    2015-01-01

    The corneal stroma plays several pivotal roles within the eye. Optically, it is the main refracting lens and thus has to combine almost perfect transmission of visible light with precise shape, in order to focus incoming light. Furthermore, mechanically it has to be extremely tough to protect the inner contents of the eye. These functions are governed by its structure at all hierarchical levels. The basic principles of corneal structure and transparency have been known for some time, but in recent years X-ray scattering and other methods have revealed that the details of this structure are far more complex than previously thought and that the intricacy of the arrangement of the collagenous lamellae provides the shape and the mechanical properties of the tissue. At the molecular level, modern technologies and theoretical modelling have started to explain exactly how the collagen fibrils are arranged within the stromal lamellae and how proteoglycans maintain this ultrastructure. In this review we describe the current state of knowledge about the three-dimensional stromal architecture at the microscopic level, and about the control mechanisms at the nanoscopic level that lead to optical transparency. PMID:26145225

  16. Transparency in Cooperative Online Education

    ERIC Educational Resources Information Center

    Dalsgaard, Christian; Paulsen, Morten Flate

    2009-01-01

    The purpose of this article is to discuss the following question: What is the potential of social networking within cooperative online education? Social networking does not necessarily involve communication, dialogue, or collaboration. Instead, the authors argue that "transparency" is a unique feature of social networking services.…

  17. An optically transparent, flexible, patterned and conductive silk biopolymer film (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Umar, Muhammad; Min, Kyungtaek; Kim, Sunghwan

    2017-02-01

    Transparent, flexible, and conducting films are of great interest for wearable electronics. For better biotic/abiotic interface, the films to integrate the electronics components requires the patterned surface conductors with optical transparency, smoothness, good electrical conductivity, along with the biofriendly traits of films. We focus on silk fibroin, a natural biopolymer extracted from the Bombyx mori cocoons, for this bioelectronics applications. Here we report an optically transparent, flexible, and patterned surface conductor on a silk film by burying a silver nanowires (AgNW) network below the surface of the silk film. The conducting silk film reveals high optical transparency of 80% and the excellent electronic conductivity of 15 Ω/sq, along with smooth surface. The integration of light emitting diode (LED) chip on the patterned electrodes confirms that the current can flow through the transparent and patterned electrodes on the silk film, and this result shows an application for integration of functional electronic/opto-electronic devices. Additionally, we fabricate a transparent and flexible radio frequency (RF) antenna and resistor on a silk film and apply these as a food sensor by monitoring the increasing resistance by the flow of gases from the spoiled food.

  18. Highly conductive transparent organic electrodes with multilayer structures for rigid and flexible optoelectronics.

    PubMed

    Guo, Xiaoyang; Liu, Xingyuan; Lin, Fengyuan; Li, Hailing; Fan, Yi; Zhang, Nan

    2015-05-27

    Transparent electrodes are essential components for optoelectronic devices, such as touch panels, organic light-emitting diodes, and solar cells. Indium tin oxide (ITO) is widely used as transparent electrode in optoelectronic devices. ITO has high transparency and low resistance but contains expensive rare elements, and ITO-based devices have poor mechanical flexibility. Therefore, alternative transparent electrodes with excellent opto-electrical performance and mechanical flexibility will be greatly demanded. Here, organics are introduced into dielectric-metal-dielectric structures to construct the transparent electrodes on rigid and flexible substrates. We show that organic-metal-organic (OMO) electrodes have excellent opto-electrical properties (sheet resistance of below 10 Ω sq(-1) at 85% transmission), mechanical flexibility, thermal and environmental stabilities. The OMO-based polymer photovoltaic cells show performance comparable to that of devices based on ITO electrodes. This OMO multilayer structure can therefore be used to produce transparent electrodes suitable for use in a wide range of optoelectronic devices.

  19. Two-Channel Transparency-Optimized Control Architectures in Bilateral Teleoperation With Time Delay

    PubMed Central

    Kim, Jonghyun; Chang, Pyung Hun; Park, Hyung-Soon

    2013-01-01

    This paper introduces transparency-optimized control architectures (TOCAs) using two communication channels. Two classes of two-channel TOCAs are found, thereby showing that two channels are sufficient to achieve transparency. These TOCAs achieve a greater level of transparency but poorer stability than three-channel TOCAs and four-channel TOCAs. Stability of the two-channel TOCAs has been enhanced while minimizing transparency degradation by adding a filter; and a combined use of the two classes of two-channel TOCAs is proposed for both free space and constrained motion, which involve switching between two TOCAs for transition between free space and constrained motions. The stability condition of the switched teleoperation system is derived for practical applications. Through the one degree-of-freedom (DOF) experiment, the proposed two-channel TOCAs were shown to operate stably, while achieving better transparency under time delay than the other TOCAs. PMID:23833548

  20. Videos for Teachers: Successful Teaching Strategies in Middle and High School Classrooms. [CD-ROM].

    ERIC Educational Resources Information Center

    Teachers Network, New York, NY.

    This CD-ROM presents six videos that feature veteran middle and high school teachers in action in their classrooms. Each video offers links to supplemental education resources, including innovative lesson plans. The six videos are: "Monsters and Myths" (a humanities unit for middle school students); "The Bleeding Edge" (a thematic…

  1. Is Music an Active Developmental Tool or Simply a Supplement? Early Childhood Preservice Teachers' Beliefs about Music

    ERIC Educational Resources Information Center

    Kim, Hae Kyoung; Kemple, Kristen M.

    2011-01-01

    This study examines early childhood preservice teachers' beliefs about the importance of music in early childhood and explores factors influencing those beliefs. The study found that preservice teachers in this study held relatively strong beliefs about the importance of music, including aesthetic, quality-of-life, and social-emotional benefits.…

  2. Transparent electrodes fabricated via the self-assembly of silver nanowires using a bubble template.

    PubMed

    Tokuno, Takehiro; Nogi, Masaya; Jiu, Jinting; Sugahara, Tohru; Suganuma, Katsuaki

    2012-06-26

    To shore up the demand of transparent electrodes for wide applications such as organic light emitting diodes and solar cells, transparent electrodes are required as an alternative for indium tin oxide electrodes. Herein the self-assembly method with a bubble template paves the way for cost-effective fabrication of transparent electrodes with high conductivity and transparency using self-assembly of silver nanowires (AgNWs) in a bubble template. AgNWs were first dispersed in water that was bubbled with a surfactant and a thickening agent. Furthermore, these AgNWs were assembled by lining along the bubble ridges. When the bubbles containing the AgNWs were sandwiched between two glass substrates, the bubble ridges including the AgNWs formed continuous polygonal structures. Mesh structures were formed on both glass substrates after air-drying. The mesh structures evolved into mesh transparent electrodes following heat-treatment. The AgNW mesh structure exhibited a low sheet resistance of 6.2 Ω/square with a transparency of 84% after heat treatment at 200 °C for 20 min. The performance is higher than that of transparent electrodes with random networks of AgNWs. Furthermore, the conductivity and transparency of the mesh transparent electrodes can be adjusted by changing the amount of the AgNW suspension and the space between the two glass substrates.

  3. Transparent conducting oxides: A δ-doped superlattice approach

    PubMed Central

    Cooper, Valentino R.; Seo, Sung S. Ambrose; Lee, Suyoun; Kim, Jun Sung; Choi, Woo Seok; Okamoto, Satoshi; Lee, Ho Nyung

    2014-01-01

    Metallic states appearing at interfaces between dissimilar insulating oxides exhibit intriguing phenomena such as superconductivity and magnetism. Despite tremendous progress in understanding their origins, very little is known about how to control the conduction pathways and the distribution of charge carriers. Using optical spectroscopic measurements and density-functional theory (DFT) simulations, we examine the effect of SrTiO3 (STO) spacer layer thickness on the optical transparency and carrier distribution in La δ-doped STO superlattices. We experimentally observe that these metallic superlattices remain highly transparent to visible light; a direct consequence of the appropriately large gap between the O 2p and Ti 3d states. In superlattices with relatively thin STO layers, we predict that three-dimensional conduction would occur due to appreciable overlap of quantum mechanical wavefunctions between neighboring δ-doped layers. These results highlight the potential for using oxide heterostructures in optoelectronic devices by providing a unique route for creating novel transparent conducting oxides. PMID:25109668

  4. Partially Transparent Petaled Mask/Occulter for Visible-Range Spectrum

    NASA Technical Reports Server (NTRS)

    Shiri, Ron Shahram; Wasylkiwskyj, Wasyl

    2013-01-01

    The presence of the Poisson Spot, also known as the spot of Arago, has been known since the 18th century. This spot is the consequence of constructive interference of light diffracted by the edge of the obstacle where the central position can be determined by symmetry of the object. More recently, many NASA missions require the suppression of this spot in the visible range. For instance, the exoplanetary missions involving space telescopes require telescopes to image the planetary bodies orbiting central stars. For this purpose, the starlight needs to be suppressed by several orders of magnitude in order to image the reflected light from the orbiting planet. For the Earth-like planets, this suppression needs to be at least ten orders of magnitude. One of the common methods of suppression involves sharp binary petaled occulters envisioned to be placed many thousands of miles away from the telescope blocking the starlight. The suppression of the Poisson Spot by binary sharp petal tips can be problematic when the thickness of the tips becomes smaller than the wavelength of the incident beam. First they are difficult to manufacture and also it invalidates the laws of physical optics. The proposed partially transparent petaled masks/occulters compensate for this sharpness with transparency along the surface of the petals. Depending on the geometry of the problem, this transparency can be customized such that only a small region of the petal is transparent and the remaining of the surface is opaque. This feature allows easy fabrication of this type of occultation device either as a mask or occulter. A partially transparent petaled mask/ occulter has been designed for the visible spectrum range. The mask/occulter can suppress the intensity along the optical axis up to ten orders of magnitude. The design process can tailor the mask shape, number of petals, and transparency level to the near-field and farfield diffraction region. The mask/occulter can be used in space

  5. Effectively Transparent Front Contacts for Optoelectronic Devices

    DOE PAGES

    Saive, Rebecca; Borsuk, Aleca M.; Emmer, Hal S.; ...

    2016-06-10

    Effectively transparent front contacts for optoelectronic devices achieve a measured transparency of up to 99.9% and a measured sheet resistance of 4.8 Ω sq-1. These 3D microscale triangular cross-section grid fingers redirect incoming photons efficiently to the active semiconductor area and can replace standard grid fingers as well as transparent conductive oxide layers in optoelectronic devices. Optoelectronic devices such as light emitting diodes, photodiodes, and solar cells play an important and expanding role in modern technology. Photovoltaics is one of the largest optoelectronic industry sectors and an ever-increasing component of the world's rapidly growing renewable carbon-free electricity generation infrastructure. Inmore » recent years, the photovoltaics field has dramatically expanded owing to the large-scale manufacture of inexpensive crystalline Si and thin film cells and modules. The current record efficiency (η = 25.6%) Si solar cell utilizes a heterostructure intrinsic thin layer (HIT) design[1] to enable increased open circuit voltage, while more mass-manufacturable solar cell architectures feature front contacts.[2, 3] Thus improved solar cell front contact designs are important for future large-scale photovoltaics with even higher efficiency.« less

  6. Aging Aircraft Transparencies: AN Italian Air Force Fleet Case History

    NASA Astrophysics Data System (ADS)

    Caucci, D.; Aiello, L.; Bagnoli, F.; Bernabei, M.

    2008-08-01

    Aircraft acrylic transparencies are structural components that must withstand flight and ground loads. Crazing occurrence, known as Environmental Stress Cracking (ESC), causes their substitution during aircraft maintenance operations. This form of aging is mainly a physical phenomenon due to the interaction of transparencies base material with an active liquid and leads craze formation at lower stress that would be required in air. In this paper, an extensive phenomenon of network ESC occurred on transparencies of many aircrafts operating in the same fleet was investigated. Cover application while parking was found to be the critical aspect in crazing appearance, thus acting as physical shield for condensed water and heat transferring.

  7. Coloured Rings Produced on Transparent Plates

    ERIC Educational Resources Information Center

    Suhr, Wilfried; Schlichting, H. Joachim

    2007-01-01

    Beautiful colored interference rings can be produced by using transparent plates such as window glass. A simple model explains this effect, which was described by Newton but has almost been forgotten. (Contains 11 figures.)

  8. Transparent perovskite light-emitting diodes by employing organic-inorganic multilayer transparent top electrodes

    NASA Astrophysics Data System (ADS)

    Liang, Junqing; Guo, Xiaoyang; Song, Li; Lin, Jie; Hu, Yongsheng; Zhang, Nan; Liu, Xingyuan

    2017-11-01

    Perovskite light-emitting diodes (PeLEDs) have attracted much attention in the past two years due to their high photoluminescence quantum efficiencies and wavelength tuneable characteristics. In this work, transparent PeLEDs (TPeLEDs) have been reported with organic-inorganic multilayer transparent top electrodes that have more convenient control of the organic/electrode interface. By optimizing the thickness of the MoO3 layer in the top electrode, the best average transmittance of 47.21% has been obtained in the TPeLED in the wavelength range of 380-780 nm. In addition, the TPeLED exhibits a maximum luminance of 6380 cd/m2, a maximum current efficiency (CE) of 3.50 cd/A, and a maximum external quantum efficiency (EQE) of 0.85% from the bottom side together with a maximum luminance of 3380 cd/m2, a maximum CE of 1.47 cd/A, and a maximum EQE of 0.36% from the top side. The total EQE of the TPeLED is about 86% of that of the reference device, indicating efficient TPeLED achieved in this work, which could have significant contribution to PeLEDs for see-through displays.

  9. Transparency and Opacity: Levinasian Reflections on Accountability in Australian Schooling

    ERIC Educational Resources Information Center

    Sellar, Sam

    2015-01-01

    This article draws on the philosophy of Emmanuel Levinas to consider, from an ethical perspective, the current transparency and accountability agenda in Australian schooling. It focuses on the case of the "My School" website and the argument that transparent publication of comparative performance data via the website provides a basis for…

  10. Silver-Nanowire-Embedded Transparent Metal-Oxide Heterojunction Schottky Photodetector.

    PubMed

    Abbas, Sohail; Kumar, Mohit; Kim, Hong-Sik; Kim, Joondong; Lee, Jung-Ho

    2018-05-02

    We report a self-biased and transparent Cu 4 O 3 /TiO 2 heterojunction for ultraviolet photodetection. The dynamic photoresponse improved 8.5 × 10 4 % by adding silver nanowires (AgNWs) Schottky contact and maintaining 39% transparency. The current density-voltage characteristics revealed a strong interfacial electric field, responsible for zero-bias operation. In addition, the dynamic photoresponse measurement endorsed the effective holes collection by embedded-AgNWs network, leading to fast rise and fall time of 0.439 and 0.423 ms, respectively. Similarly, a drastic improvement in responsivity and detectivity of 187.5 mAW -1 and of 5.13 × 10 9 Jones, is observed, respectively. The AgNWs employed as contact electrode can ensure high-performance for transparent and flexible optoelectronic applications.

  11. Building integrated semi-transparent photovoltaics: energy and daylighting performance

    NASA Astrophysics Data System (ADS)

    Kapsis, Konstantinos; Athienitis, Andreas K.

    2011-08-01

    This paper focuses on modeling and evaluation of semi-transparent photovoltaic technologies integrated into a coolingdominated office building façade by employing the concept of three-section façade. An energy simulation model is developed, using building simulation software, to investigate the effect of semi-transparent photovoltaic transmittance on the energy performance of an office in a typical office building in Montreal. The analysis is performed for five major façade orientations and two façade configurations. Using semi-transparent photovoltaic integrated into the office façade, electricity savings of up to 53.1% can be achieved compared to a typical office equipped with double glazing with Argon filling and a low emissivity coating, and lighting controlled based on occupancy and daylight levels.e.c

  12. Comparing levels of school performance to science teachers' reports on knowledge/skills, instructional use and student use of computers

    NASA Astrophysics Data System (ADS)

    Kerr, Rebecca

    The purpose of this descriptive quantitative and basic qualitative study was to examine fifth and eighth grade science teachers' responses, perceptions of the role of technology in the classroom, and how they felt that computer applications, tools, and the Internet influence student understanding. The purposeful sample included survey and interview responses from fifth grade and eighth grade general and physical science teachers. Even though they may not be generalizable to other teachers or classrooms due to a low response rate, findings from this study indicated teachers with fewer years of teaching science had a higher level of computer use but less computer access, especially for students, in the classroom. Furthermore, teachers' choice of professional development moderated the relationship between the level of school performance and teachers' knowledge/skills, with the most positive relationship being with workshops that occurred outside of the school. Eighteen interviews revealed that teachers perceived the role of technology in classroom instruction mainly as teacher-centered and supplemental, rather than student-centered activities.

  13. Automated methods of tree boundary extraction and foliage transparency estimation from digital imagery

    Treesearch

    Sang-Mook Lee; Neil A. Clark; Philip A. Araman

    2003-01-01

    Foliage transparency in trees is an important indicator for forest health assessment. This paper helps advance transparency measurement research by presenting methods of automatic tree boundary extraction and foliage transparency estimation from digital images taken from the ground of open grown trees.Extraction of proper boundaries of tree crowns is the...

  14. Missile Defense: European Phased Adaptive Approach Acquisitions Face Synchronization, Transparency, and Accountability Challenges

    DTIC Science & Technology

    2010-12-21

    House of Representatives Subject: Missile Defense: European Phased Adaptive Approach Acquisitions Face Synchronization , Transparency, and...TITLE AND SUBTITLE Missile Defense: European Phased Adaptive Approach Acquisitions Face Synchronization , Transparency, and Accountability...However, we found that DOD has not fully implemented a management process that synchronizes EPAA acquisition activities and ensures transparency and

  15. Mathematical expressions using fringe projections for transparent objects

    NASA Astrophysics Data System (ADS)

    Su, Wei-Hung; Cheng, Chau-Jern

    2017-08-01

    A setup using fringe projection techniques to perform 3D profile measurements for transparent objects is presented. The related mathematical equations are derived as well. A fringe pattern is illuminated onto the transparent object. Fringes passing through the inspected object are then projected onto a screen. A CCD camera is employed to record the transmitted fringes on the screen. Fringe on the screen are deformed by the refractive index and the surface structure, and therefore are desirable to describe the shape of the inspected sample.

  16. Highly Transparent, Visible-Light Photodetector Based on Oxide Semiconductors and Quantum Dots.

    PubMed

    Shin, Seung Won; Lee, Kwang-Ho; Park, Jin-Seong; Kang, Seong Jun

    2015-09-09

    Highly transparent phototransistors that can detect visible light have been fabricated by combining indium-gallium-zinc oxide (IGZO) and quantum dots (QDs). A wide-band-gap IGZO film was used as a transparent semiconducting channel, while small-band-gap QDs were adopted to absorb and convert visible light to an electrical signal. Typical IGZO thin-film transistors (TFTs) did not show a photocurrent with illumination of visible light. However, IGZO TFTs decorated with QDs showed enhanced photocurrent upon exposure to visible light. The device showed a responsivity of 1.35×10(4) A/W and an external quantum efficiency of 2.59×10(4) under illumination by a 635 nm laser. The origin of the increased photocurrent in the visible light was the small band gap of the QDs combined with the transparent IGZO films. Therefore, transparent phototransistors based on IGZO and QDs were fabricated and characterized in detail. The result is relevant for the development of highly transparent photodetectors that can detect visible light.

  17. Creating financial transparency in public health: examining best practices of system partners.

    PubMed

    Honoré, Peggy A; Clarke, Richard L; Mead, Dean Michael; Menditto, Susan M

    2007-01-01

    Financial transparency is based on concepts for valid, standardized information that is readily accessible and routinely disseminated to stakeholders. While Congress and others continuously ask for an accounting of public health investments, transparency remains an ignored concept. The objective of this study was to examine financial transparency practices in other industries considered as part of the public health system. Key informants, regarded as financial experts on the operations of hospitals, school systems, and higher education, were a primary source of information. Principal findings were that system partners have espoused some concepts for financial transparency beginning in the early 20th century--signifying an 80-year implementation gap for public health. Critical features that promote accountability included standardized data collection methods and infrastructures, uniform practices for quantitative analysis of financial performance, and credentialing of the financial management workforce. Recommendations are offered on the basis of these findings to aid public health to close this gap by framing a movement toward transparency.

  18. World History--Part 2: Teacher's Guide [and Student Guide]. Parallel Alternative Strategies for Students (PASS).

    ERIC Educational Resources Information Center

    Schaap, Eileen, Ed.; Fresen, Sue, Ed.

    This teacher's guide and student guide unit contains supplemental readings, activities, and methods adapted for secondary students who have disabilities and other students with diverse learning needs. The materials differ from standard textbooks and workbooks in several ways: simplified text; smaller units of study; reduced vocabulary level;…

  19. Characterization of transparent dentin in attrited teeth using optical coherence tomography.

    PubMed

    Mandurah, Mona M; Sadr, Alireza; Bakhsh, Turki A; Shimada, Yasushi; Sumi, Yasunori; Tagami, Junji

    2015-05-01

    Attrition and wear of tooth surface occur with aging and result in loss of enamel, with exposure and histological changes in dentin. Dealing with attrited teeth and restoration of the lost tissue are clinically challenging. The main objective of this study is to characterize the exposed transparent dentin in the occlusal surface of attrited teeth by optical coherence tomography (OCT). Naturally attrited, extracted human teeth with occlusal-transparent dentin were investigated in comparison to sound and carious teeth. The teeth were subjected to OCT imaging and then cross-sectioned and polished. OCT B-scans were compared to light microscopy images of the same cross section. In OCT images, some changes were evident at the transparent dentin in attrited teeth. An OCT attenuation coefficient parameter (μ t) was derived based on the Beer-Lambert law as a function of backscatter signal slope. The mean values of μ t were 1.05 ± 0.3, 2.23 ± 0.4, and 0.61 ± 0.27 mm(-1) for sound, carious, and transparent dentins, respectively. One-way ANOVA with Tukey's post-hoc showed a significant difference between groups (p < 0.05). Physiological changes in transparent dentin that involve deposition of mineral casts in the dentinal tubules lead to lower attenuation of OCT signal. OCT has a potential role to detect transparent dentin on the surface of attrited teeth and can be used in the future as a clinical adjunct tool.

  20. Transparent magnesium aluminate spinel: a prospective biomaterial for esthetic orthodontic brackets.

    PubMed

    Krishnan, Manu; Tiwari, Brijesh; Seema, Saraswathy; Kalra, Namitha; Biswas, Papiya; Rajeswari, Kotikalapudi; Suresh, Madireddy Buchi; Johnson, Roy; Gokhale, Nitin M; Iyer, Satish R; Londhe, Sanjay; Arora, Vimal; Tripathi, Rajendra P

    2014-11-01

    Adult orthodontics is recently gaining popularity due to its importance in esthetics, oral and general health. However, none of the currently available alumina or zirconia based ceramic orthodontic brackets meet the esthetic demands of adult patients. Inherent hexagonal lattice structure and associated birefringence limits the visible light transmission in polycrystalline alumina and make them appear white and non transparent. Hence focus of the present study was to assess the feasibility of using magnesium aluminate (MgAl2O4) spinel; a member of the transparent ceramic family for esthetic orthodontic brackets. Transparent spinel specimens were developed from commercially available white spinel powder through colloidal shaping followed by pressureless sintering and hot isostatic pressing at optimum conditions of temperature and pressure. Samples were characterized for chemical composition, phases, density, hardness, flexural strength, fracture toughness and optical transmission. Biocompatibility was evaluated with in-vitro cell line experiments for cytotoxicity, apoptosis and genotoxicity. Results showed that transparent spinel samples had requisite physico-chemical, mechanical, optical and excellent biocompatibility for fabricating orthodontic brackets. Transparent spinel developed through this method demonstrated its possibility as a prospective biomaterial for developing esthetic orthodontic brackets.

  1. Transparent, conducting films based on metal/dielectric photonic band gaps

    NASA Astrophysics Data System (ADS)

    Bloemer, Mark J.; Scalora, Michael; D'Aguanno, G.; Bowden, Charles M.; Baglio, Salvatore; Sibilia, Concita; Centini, Marco; Bertolotti, Mario

    1999-07-01

    A transparent conductor has been developed based on 1D metal/dielectric photonic band gap structures. Laminated metal/dielectric filters containing 100 nm of silver have been fabricated with > 50% transmittance. Applications for transparent, conducting films include antennas embedded in windshields, electrodes on flat panel displays, electromagnetic shielding, and solar window panes.

  2. Effect of nutritional supplements on attentional-deficit hyperactivity disorder.

    PubMed

    Dykman, K D; Dykman, R A

    1998-01-01

    This study reports the effects of two nutritional products upon the severity of symptoms in children with confirmed diagnoses of Attention-Deficit Hyperactivity Disorder (ADHD): a glyconutritional product containing saccharides known to be important in healthy functioning and a phytonutritional product containing flash-dried fruits and vegetables. Seventeen ADHD children were recruited from a local parent support group. Parents of five of the subjects did not have their children on methylphenidate. Of the remaining twelve, all on methylphenidate, six were left on prescribed doses (random assignment). The other six had their doses reduced by half after two weeks (study duration was six weeks). The subjects were assessed initially and three subsequent times over a period of six weeks (longitudinal nonrandomized design). The behavior disorder items for ADHD, Oppositional Defiant Disorder (ODD), and Conduct Disorder (CD) as listed in the Diagnostic and Statistical Manual for Mental Disorders (DSM IV) (American Psychiatric Association, 1994) were rated by teachers and parents on a 3-point scale. Also included was a Side Effects Scale described by Barkley (1990). The children received the glyconutritional supplement for the entire six weeks. After three weeks, the phytonutritional supplement was added to the diet to increase the probability of positive results. The glyconutritional supplement decreased the number and severity of ADHD, associated ODD and CD symptoms, and side effects in all groups during the first two weeks of the study. There was little further reduction with the addition of the phytonutritional supplement. The three study groups did not differ statistically in degree of reduction over observations. Present results suggest that symptoms of ADHD may be reduced by the addition to the diet of saccharides used by the body in glycoconjugate synthesis.

  3. Could Transparency Bring Economic Diversity?

    ERIC Educational Resources Information Center

    Kahlenberg, Richard D.

    2007-01-01

    The Spellings Commission report calls for greater access to higher education for low- and moderate-income students, greater transparency in the way higher education works and greater accountability for producing results. These recommendations are all significant in their own right, but the three concepts also converge to provide powerful support…

  4. Preschoolers' use of reflective properties: identification of reflections on partially transparent surfaces.

    PubMed

    Costanzo, E S; Wittgenstein, K M; Benson, K

    2001-12-01

    This exploratory study extended past studies of children's ability to reference the mirror as a tool in locating the source of reflected images to preschoolers' ability to use the affordances of a transparency. Thirty-six children (3.5 to 5 years old) were shown nonreflected lights and lights reflected on a partially transparent, glassy surface. Children did not spontaneously locate the source of the reflected image. However, they were able to verbally discriminate reflected from nonreflected images following training. These findings indicate that, although preschoolers may not spontaneously use transparencies as a perceptual tool, the ability to distinguish visual differences of reflected from nonreflected images on transparencies is likely within preschool children's developmental capacity.

  5. Middle Schoolers and Magazines: What Teachers Can Learn from Students' Leisure Reading Habits

    ERIC Educational Resources Information Center

    Gabriel, Rachael; Allington, Richard; Billen, Monica

    2012-01-01

    Teachers, parents, and librarians are constantly looking for methods and materials that engage students as readers and motivate them to increase the time they spend reading. In this article we describe findings from a study of middle schoolers' magazine reading habits that gave us a close look at the power of magazines as supplemental supports for…

  6. Teacher Perceptions of Their Curricular and Pedagogical Shifts: Outcomes of a Project-Based Model of Teacher Professional Development in the Next Generation Science Standards.

    PubMed

    Shernoff, David J; Sinha, Suparna; Bressler, Denise M; Schultz, Dawna

    2017-01-01

    In this study, we conducted a model of teacher professional development (PD) on the alignment of middle and high school curricula and instruction to the Next Generation Science Standards (NGSSs), and evaluated the impact of the PD on teacher participants' development. The PD model included a 4-day summer academy emphasizing project-based learning (PBL) in the designing of NGSS-aligned curricula and instruction, as well as monthly follow-up Professional Learning Community meetings throughout the year providing numerous opportunities for teachers to develop and implement lesson plans, share results of lesson writing and implementation (successes and challenges), provide mutual feedback, and refine curricula and assessments. Following the summer academy, six female teachers were interviewed about their current conceptualizations of NGSS, the extent of curricular shifts made that are required by NGSS, their self-perceptions regarding their level of accomplishment in curriculum writing, and the benefits of the PD in reaching their goals related to NGSS. Interviews were supplemented with an analysis of lesson plans written while participating in the PD program. The interviewed teachers suggested that they had made important conceptual and pedagogical shifts required by NGSS as they participated in the PD, and also noted a variety of challenges as they made this shift. While all teachers were relative novices at NGSS curriculum writing before the PD, most of the teachers interviewed felt that they had achieved the status of an "accomplished novice" following the summer academy. An analysis of their written lessons suggested a great range in the extent to which teachers effectively applied their understanding of NGSS to write lessons aligned to NGSS. Interviewed teachers believed that the PD model was helpful to their development as science teachers, and all reported that there were no aspects of the PD that were not helpful. Even though most teachers obtained a basic

  7. Transparent active matrix organic light-emitting diode displays driven by nanowire transistor circuitry.

    PubMed

    Ju, Sanghyun; Li, Jianfeng; Liu, Jun; Chen, Po-Chiang; Ha, Young-Geun; Ishikawa, Fumiaki; Chang, Hsiaokang; Zhou, Chongwu; Facchetti, Antonio; Janes, David B; Marks, Tobin J

    2008-04-01

    Optically transparent, mechanically flexible displays are attractive for next-generation visual technologies and portable electronics. In principle, organic light-emitting diodes (OLEDs) satisfy key requirements for this application-transparency, lightweight, flexibility, and low-temperature fabrication. However, to realize transparent, flexible active-matrix OLED (AMOLED) displays requires suitable thin-film transistor (TFT) drive electronics. Nanowire transistors (NWTs) are ideal candidates for this role due to their outstanding electrical characteristics, potential for compact size, fast switching, low-temperature fabrication, and transparency. Here we report the first demonstration of AMOLED displays driven exclusively by NW electronics and show that such displays can be optically transparent. The displays use pixel dimensions suitable for hand-held applications, exhibit 300 cd/m2 brightness, and are fabricated at temperatures suitable for integration on plastic substrates.

  8. 78 FR 6342 - U.S. Extractive Industries Transparency Initiative Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-30

    ... Industries Transparency Initiative Advisory Committee AGENCY: Interior, Office of the Secretary. ACTION... Initiative Advisory Committee will meet as indicated below. DATES: Wednesday, February 13, 2013, from 8:30 a... Transparency Initiative (EITI). The Committee includes representatives from Government agencies, extractive...

  9. Transparent, flexible supercapacitors from nano-engineered carbon films.

    PubMed

    Jung, Hyun Young; Karimi, Majid B; Hahm, Myung Gwan; Ajayan, Pulickel M; Jung, Yung Joon

    2012-01-01

    Here we construct mechanically flexible and optically transparent thin film solid state supercapacitors by assembling nano-engineered carbon electrodes, prepared in porous templates, with morphology of interconnected arrays of complex shapes and porosity. The highly textured graphitic films act as electrode and current collector and integrated with solid polymer electrolyte, function as thin film supercapacitors. The nanostructured electrode morphology and the conformal electrolyte packaging provide enough energy and power density for the devices in addition to excellent mechanical flexibility and optical transparency, making it a unique design in various power delivery applications.

  10. Transparent, flexible supercapacitors from nano-engineered carbon films

    PubMed Central

    Jung, Hyun Young; Karimi, Majid B.; Hahm, Myung Gwan; Ajayan, Pulickel M.; Jung, Yung Joon

    2012-01-01

    Here we construct mechanically flexible and optically transparent thin film solid state supercapacitors by assembling nano-engineered carbon electrodes, prepared in porous templates, with morphology of interconnected arrays of complex shapes and porosity. The highly textured graphitic films act as electrode and current collector and integrated with solid polymer electrolyte, function as thin film supercapacitors. The nanostructured electrode morphology and the conformal electrolyte packaging provide enough energy and power density for the devices in addition to excellent mechanical flexibility and optical transparency, making it a unique design in various power delivery applications. PMID:23105970

  11. Transparent, flexible supercapacitors from nano-engineered carbon films

    NASA Astrophysics Data System (ADS)

    Jung, Hyun Young; Karimi, Majid B.; Hahm, Myung Gwan; Ajayan, Pulickel M.; Jung, Yung Joon

    2012-10-01

    Here we construct mechanically flexible and optically transparent thin film solid state supercapacitors by assembling nano-engineered carbon electrodes, prepared in porous templates, with morphology of interconnected arrays of complex shapes and porosity. The highly textured graphitic films act as electrode and current collector and integrated with solid polymer electrolyte, function as thin film supercapacitors. The nanostructured electrode morphology and the conformal electrolyte packaging provide enough energy and power density for the devices in addition to excellent mechanical flexibility and optical transparency, making it a unique design in various power delivery applications.

  12. Rain droplet erosion mechanisms in transparent plastic materials

    NASA Technical Reports Server (NTRS)

    Schmitt, G. F., Jr.

    1974-01-01

    Tests were conducted to determine the damaging effects of rain erosion on optically transparent materials. The rotating arm test equipment used for the tests is described. Typical transparent materials such as those found in windshields, infrared windows, lasers, and television systems were tested. Nominal velocities of 400, 500, and 600 miles per hour and rainfall conditions of one inch per hour simulated rainfall were used in the tests. It was determined that an 80 percent reduction in laser transmittance can occur in plastics submitted to rain erosion. Significant results of the environmental tests are explained.

  13. Low Velocity Impact Testing and Nondestructive Evaluation of Transparent Materials

    NASA Astrophysics Data System (ADS)

    Brennan, R. E.; Green, W. H.

    2011-06-01

    Advanced transparent materials are used in protective systems for enhancing the survivability of ground vehicles, air vehicles, and personnel in applications such as face shields, riot gear, and vehicle windows. Low velocity impact damage can limit visibility and compromise the structural integrity of a transparent system, increasing the likelihood of further damage or penetration from a high velocity impact strike. For this reason, it is critical to determine damage tolerance levels of transparent systems to indicate whether or not a component should be replaced. In this study, transparent laminate systems will be tested by comparing baseline conditions to experimentally controlled damage states. Destructive testing including air gun and sphere impact testing will be used to replicate low velocity impacts in the field. Characterization of the damaged state will include basic visual inspection as well as nondestructive techniques including cross-polarization, x-ray, and ultrasound. The combination of destructive testing and characterization of the resulting damage can help to establish a damage acceptance criterion for materials used in protective systems.

  14. Mid-twentieth-century anatomical transparencies and the depiction of three-dimensional form.

    PubMed

    Wall, Shelley

    2010-11-01

    Before the advent of digital visualization, the "anatomical transparency"--layered images of organ systems, printed on a transparent medium--flourished in the mid-twentieth century as an interactive means to represent complex anatomical relationships to medical professionals and lay audiences. This article introduces the transparency work of medical illustrators Gladys McHugh and Ernest W. Beck, situating it in the historical context of strategies to represent three-dimensional anatomical relationships using print media.

  15. Transparent, flexible, and high-performance supercapacitor based on ultrafine nickel cobaltite nanospheres

    NASA Astrophysics Data System (ADS)

    Liu, Xinyue; Wang, Jianxing; Yang, Guowei

    2017-07-01

    There has been growing interest in transparent and flexible electronic devices such as wrist watch, cell phone, and so on. These devices need the power sources which also have transparent and flexible features. Here, we demonstrate a transparent and flexible energy storage device with outstanding electrochemical performance, high energy density, and super-long life based on ultrafine NiCo2O4 nanospheres which are synthesized by an innovative method concerning laser ablation in liquid and hydrothermal process. The ultrafine NiCo2O4 nanospheres provide high electrochemical activity and the synthesized colloidal solution is suitable for transparent devices. The transparent and flexible device shows a high specific capacitance of 299.7 F/g at the scan rate of 1 mV/s and a long cycling life of 90.4% retention rate after 10,000 cycles at a scan rate of 10 mV/s, which is superior to that of previously reported transparent and flexible energy storage device. In addition, an optical transmittance up to 55% at the wavelength of 550 nm is obtained, and the bending test shows that the bending angle makes no difference to the specific capacitance of the device. In addition, it shows an outstanding energy density of 10.41 Wh/kg. The integrated electrochemical performances of the device are good based on NiCo2O4 nanospheres. These findings make the ultrafine NiCo2O4 nanospheres being promising electrode materials for transparent and flexible energy storage devices.

  16. Transparency in a Pediatric Quality Improvement Collaborative: A Passionate Journey by NPC-QIC Clinicians and Parents.

    PubMed

    Lihn, Stacey L; Kugler, John D; Peterson, Laura E; Lannon, Carole M; Pickles, Diane; Beekman, Robert H

    2015-01-01

    Transparency-sharing data or information about outcomes, processes, protocols, and practices-may be the most powerful driver of health care improvement. In this special article, the development and growth of transparency within the National Pediatric Cardiology Quality Improvement Collaborative is described. The National Pediatric Cardiology Quality Improvement Collaborative transparency journey is guided by equal numbers of clinicians and parents of children with congenital heart disease working together in a Transparency Work Group. Activities are organized around four interrelated levels of transparency (individual, organizational, collaborative, and system), each with a specified purpose and aim. A number of Transparency Work Group recommendations have been operationalized. Aggregate collaborative performance is now reported on the public-facing web site. Specific information that the Transparency Work Group recommends centers provide to parents has been developed and published. Almost half of National Pediatric Cardiology Quality Improvement Collaborative centers participated in a pilot of transparently sharing their outcomes achieved with one another. Individual centers have also begun successfully implementing recommended transparency activities. Despite progress, barriers to full transparency persist, including health care organization concerns about potential negative effects of disclosure on reputation and finances, and lack of reliable definitions, data, and reporting standards for fair comparisons of centers. The National Pediatric Cardiology Quality Improvement Collaborative's transparency efforts have been a journey that continues, not a single goal or destination. Balanced participation of clinicians and parents has been a critical element of the collaborative's success on this issue. Plans are in place to guide implementation of additional transparency recommendations across all four levels, including extension of the activities beyond the

  17. Producing high-quality negatives from ERTS black-and-white transparancies

    Treesearch

    Richard J. Myhre

    1973-01-01

    A method has been devised for producing high-quality black-and-white negatives quickly and efficiently from dense transparencies orgininating from Earth Resources Technology Satellite imagery. Transparencies are evaluated on a standard light source to determine exposure and processing information needed for making negatives. A “System ASA Rating” was developed by...

  18. World History--Part 1. Teacher's Guide [and Student Guide]. Parallel Alternative Strategies for Students (PASS).

    ERIC Educational Resources Information Center

    Schaap, Eileen, Ed.; Fresen, Sue, Ed.

    This teacher's guide and student guide unit contains supplemental readings, activities, and methods adapted for secondary students who have disabilities and other students with diverse learning needs. The unit focuses on world history and correlates to Florida's Sunshine State Standards. It is divided into the following 21 units of study that…

  19. 77 FR 31377 - U.S. Extractive Industries Transparency Initiative Tribal Consultation

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-25

    ... Industries Transparency Initiative Tribal Consultation AGENCY: Office of the Secretary, Interior. ACTION... regarding the United States Extractive Industries Transparency Initiative, to be held at the National... tribes in the months of June and July regarding this initiative. Interior also invites tribes to...

  20. 78 FR 37623 - Transparent Value Trust, et al.; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-21

    ...] Transparent Value Trust, et al.; Notice of Application June 14, 2013. AGENCY: Securities and Exchange... (e) certain registered management investment companies and unit investment trusts outside of the same group of investment companies as the series to acquire Shares. Applicants: Transparent Value Trust...

  1. Reactivity and reactions to regulatory transparency in medicine, psychotherapy and counselling.

    PubMed

    McGivern, Gerry; Fischer, Michael D

    2012-02-01

    We explore how doctors, psychotherapists and counsellors in the U.K. react to regulatory transparency, drawing on qualitative research involving 51 semi-structured interviews conducted during 2008-10. We use the concept of 'reactivity mechanisms' (Espeland & Sauder, 2007) to explain how regulatory transparency disrupts practices through simplifying and decontextualizing them, altering practitioners' reflexivity, leading to defensive forms of practice. We make an empirical contribution by exploring the impact of transparency on doctors compared with psychotherapists and counsellors, who represent an extreme case due to their uniquely complex practice, which is particularly affected by this form of regulation. We make a contribution to knowledge by developing a model of reactivity mechanisms, which explains how clinical professionals make sense of media and professional narratives about regulation in ways that produce emotional reactions and, in turn, defensive reactivity to transparency. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. Tunable far-infrared plasmonically induced transparency in graphene based nano-structures

    NASA Astrophysics Data System (ADS)

    Dolatabady, Alireza; Granpayeh, Nosrat

    2018-07-01

    In this paper, a structure is proposed to show the phenomenon of tunable far-infrared plasmonically induced transparency. The structure includes a nano-ribbon waveguide side-coupled to nano-stub resonators. The realized effect is due to the coupling between the consecutive nano-stub resonators spaced in properly designed distances, providing a constructive interference in the virtually created Fabry–Perot cavity. Due to the Fabry–Perot like cavity created between two consecutive nano-stubs, periodic values of nano-stubs separation can produce transparency windows. Increasing the number of nano-stubs would increase the number of transparency windows in different frequencies. The structure is theoretically investigated and numerically simulated by using the finite difference time domain method. Owing to the chemical potential dependency of graphene conductivity, the transparency windows can be actively tuned. The proposed component can be extensively utilized in nano-scale switching and slow-light systems.

  3. Films of Carbon Nanomaterials for Transparent Conductors

    PubMed Central

    Ho, Xinning; Wei, Jun

    2013-01-01

    The demand for transparent conductors is expected to grow rapidly as electronic devices, such as touch screens, displays, solid state lighting and photovoltaics become ubiquitous in our lives. Doped metal oxides, especially indium tin oxide, are the commonly used materials for transparent conductors. As there are some drawbacks to this class of materials, exploration of alternative materials has been conducted. There is an interest in films of carbon nanomaterials such as, carbon nanotubes and graphene as they exhibit outstanding properties. This article reviews the synthesis and assembly of these films and their post-treatment. These processes determine the film performance and understanding of this platform will be useful for future work to improve the film performance. PMID:28809267

  4. Cosmic transparency and acceleration

    NASA Astrophysics Data System (ADS)

    Holanda, R. F. L.; Pereira, S. H.; Jain, Deepak

    2018-01-01

    In this paper, by considering an absorption probability independent of photon wavelength, we show that current type Ia supernovae (SNe Ia) and gamma-ray burst (GRB) observations plus high-redshift measurements of the cosmic microwave background (CMB) radiation temperature support cosmic acceleration regardless of the transparent-universe assumption. Two flat scenarios are considered in our analyses: the Λ CDM model and a kinematic model. We consider τ (z )=2 ln (1 +z )ɛ, where τ (z ) denotes the opacity between an observer at z =0 and a source at z . This choice is equivalent to deforming the cosmic distance duality relation as DLDA-1=(1 +z )2+ɛ and, if the absorption probability is independent of photon wavelength, the CMB temperature evolution law is TCMB(z )=T0(1 +z )1+2 ɛ /3. By marginalizing on the ɛ parameter, our analyses rule out a decelerating universe at 99.99% C.L. for all scenarios considered. Interestingly, by considering only SNe Ia and GRBs observations, we obtain that a decelerated universe—indicated by ΩΛ≤0.33 and q0>0 —is ruled out around 1.5 σ C.L. and 2 σ C.L., respectively, regardless of the transparent-universe assumption.

  5. Active control and switching of broadband electromagnetically induced transparency in symmetric metadevices

    NASA Astrophysics Data System (ADS)

    Yahiaoui, Riad; Manjappa, Manukumara; Srivastava, Yogesh Kumar; Singh, Ranjan

    2017-07-01

    Electromagnetically induced transparency (EIT) arises from coupling between the bright and dark mode resonances that typically involve subwavelength structures with broken symmetry, which results in an extremely sharp transparency band. Here, we demonstrate a tunable broadband EIT effect in a symmetry preserved metamaterial structure at the terahertz frequencies. Alongside, we also envisage a photo-active EIT effect in a hybrid metal-semiconductor metamaterial, where the transparency window can be dynamically switched by shining near-infrared light beam. A robust coupled oscillator model explains the coupling mechanism in the proposed design, which shows a good agreement with the observed results on tunable broadband transparency effect. Such active, switchable, and broadband metadevices could have applications in delay bandwidth management, terahertz filtering, and slow light effects.

  6. Conveying the 3D Shape of Transparent Surfaces Via Texture

    NASA Technical Reports Server (NTRS)

    Interrante, Victoria; Fuchs, Henry; Pizer, Stephen

    1997-01-01

    Transparency can be a useful device for depicting multiple overlapping surfaces in a single image. The challenge is to render the transparent surfaces in such a way that their three-dimensional shape can be readily understood and their depth distance from underlying structures clearly perceived. This paper describes our investigations into the use of sparsely-distributed discrete, opaque texture as an 'artistic device' for more explicitly indicating the relative depth of a transparent surface and for communicating the essential features of its 3D shape in an intuitively meaningful and minimally occluding way. The driving application for this work is the visualization of layered surfaces in radiation therapy treatment planning data, and the technique is illustrated on transparent isointensity surfaces of radiation dose. We describe the perceptual motivation and artistic inspiration for defining a stroke texture that is locally oriented in the direction of greatest normal curvature (and in which individual strokes are of a length proportional to the magnitude of the curvature in the direction they indicate), and discuss several alternative methods for applying this texture to isointensity surfaces defined in a volume. We propose an experimental paradigm for objectively measuring observers' ability to judge the shape and depth of a layered transparent surface, in the course of a task relevant to the needs of radiotherapy treatment planning, and use this paradigm to evaluate the practical effectiveness of our approach through a controlled observer experiment based on images generated from actual clinical data.

  7. Global dimming and brightening versus atmospheric column transparency, Europe, 1906-2007

    NASA Astrophysics Data System (ADS)

    Ohvril, Hanno; Teral, Hilda; Neiman, Lennart; Kannel, Martin; Uustare, Marika; Tee, Mati; Russak, Viivi; Okulov, Oleg; Jõeveer, Anne; Kallis, Ain; Ohvril, Tiiu; Terez, Edward I.; Terez, Galina A.; Gushchin, Gennady K.; Abakumova, Galina M.; Gorbarenko, Ekaterina V.; Tsvetkov, Anatoly V.; Laulainen, Nels

    2009-05-01

    Multiannual changes in atmospheric column transparency based on measurements of direct solar radiation allow us to assess various tendencies in climatic changes. Variability of the atmospheric integral (broadband) transparency coefficient, calculated according to the Bouguer-Lambert law and transformed to a solar elevation of 30°, is used for two Russian locations, Pavlovsk and Moscow, one Ukrainian location, Feodosiya, and three Estonian locations, Tartu, Tõravere, and Tiirikoja, covering together a 102-year period, 1906-2007. The comparison of time series revealed significant parallelism. Multiannual trends demonstrate decrease in transparency during the postwar period until 1983/1984. The trend ends with a steep decline of transparency after a series of four volcanic eruptions of Soufriere (1979), Saint Helens (1980), Alaid (1981), and El Chichón (1982). From 1984/1985 to 1990 the atmosphere remarkably restored its clarity, which almost reached again the level of the 1960s. Following the eruption of Mount Pinatubo (June 1991), there was the most significant reduction in column transparency of the postwar period. However, from the end of 1990s, the atmosphere in all considered locations is characterized with high values of transparency. The clearing of the atmosphere (from 1993) evidently indicates a decrease in the content of aerosol particles and, besides the decline of volcanic activity, may therefore be also traced to environmentally oriented changes in technology (pollution prevention), to general industrial and agricultural decline in the territory of the former USSR and Eastern Europe after deep political changes in 1991, and in part to migration of some industries out of Europe.

  8. A detailed examination of laser-ion acceleration mechanisms in the relativistic transparency regime using tracers

    NASA Astrophysics Data System (ADS)

    Stark, David J.; Yin, Lin; Albright, Brian J.; Nystrom, William; Bird, Robert

    2018-04-01

    We present a particle-in-cell study of linearly polarized laser-ion acceleration systems, in which we use both two-dimensional (2D) and three-dimensional (3D) simulations to characterize the ion acceleration mechanisms in targets which become transparent to the laser pulse during irradiation. First, we perform a target length scan to optimize the peak ion energies in both 2D and 3D, and the predictive capabilities of 2D simulations are discussed. Tracer analysis allows us to isolate the acceleration into stages of target normal sheath acceleration (TNSA), hole boring (HB), and break-out afterburner (BOA) acceleration, which vary in effectiveness based on the simulation parameters. The thinnest targets reveal that enhanced TNSA is responsible for accelerating the most energetic ions, whereas the thickest targets have ions undergoing successive phases of HB and TNSA (in 2D) or BOA and TNSA (in 3D); HB is not observed to be a dominant acceleration mechanism in the 3D simulations. It is in the intermediate optimal regime, both when the laser breaks through the target with appreciable amplitude and when there is enough plasma to form a sustained high density flow, that BOA is most effective and is responsible for the most energetic ions. Eliminating the transverse laser spot size effects by performing a plane wave simulation, we can isolate with greater confidence the underlying physics behind the ion dynamics we observe. Specifically, supplemented by wavelet and FFT analyses, we match the post-transparency BOA acceleration with a wave-particle resonance with a high-amplitude low-frequency electrostatic wave of increasing phase velocity, consistent with that predicted by the Buneman instability.

  9. NASA Thesaurus Supplement: A three part cumulative supplement to the 1982 edition of the NASA Thesaurus (supplement 2)

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The three part cumulative NASA Thesaurus Supplement to the 1982 edition of the NASA Thesaurus includes: part 1, hierarchical listing; part 2, access vocabulary, and part 3, deletions. The semiannual supplement gives complete hierarchies for new terms and includes new term indications for terms new to this supplement.

  10. NASA Thesaurus Supplement: A three part cumulative supplement to the 1982 edition of the NASA Thesaurus (supplement 3)

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The three part cumulative NASA Thesaurus Supplement to the 1982 edition of the NASA Thesaurus includes Part 1, Hierarchical Listing, Part 2, Access Vocabulary, and Part 3, Deletions. The semiannual supplement gives complete hierarchies for new terms and includes new term indications for entries new to this supplement.

  11. National transparency assessment of Kuwait's pharmaceutical sector.

    PubMed

    Badawi, Dalia A; Alkhamis, Yousif; Qaddoumi, Mohammad; Behbehani, Kazem

    2015-09-01

    Corruption is one of several factors that may hinder the access to pharmaceuticals. Since Kuwait has the highest per-capita spending on pharmaceuticals in the region, we wanted to evaluate the level of transparency in its pharmaceutical sector using an established assessment tool adapted by the World Health Organization. Standardized questionnaires were conducted via semi-structured interviews with key informants to measure the level of transparency in eight functions of the public pharmaceutical sector. The scores for the degree of vulnerability to corruption reflected marginal to moderate venerability to corruption for most pharmaceutical sectors. The perceived strengths included availability of appropriate laws, the presence of clear standard operating procedures, and the use of an efficient registration/distribution system. Weaknesses included lack of conflict of interest guidelines and written terms of reference, absence of pharmacoeconomic studies, and inconsistencies in law enforcement. Findings reveal that few functions of Kuwait pharmaceutical sector remain fairly vulnerable to corruption. However, the willingness of Kuwait Ministry of Health to adopt the assessment study and the acknowledgement of the weaknesses of current processes of the pharmaceutical sector may assist to achieve a transparent pharmaceutical system in the near future. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  12. Transparent capacitors with hybrid ZnO:Al and Ag nanowires as electrodes.

    PubMed

    Zhang, Guozhen; Wu, Hao; Wang, Xiao; Wang, Ti; Liu, Chang

    2016-03-11

    Transparent conducting films with a composite structure of AlZnO-Ag nanowires (AgNWs) have been prepared by atomic layer deposition. The sheet resistance was reduced from 120 to 9 Ω when the AgNW networks were involved. Transparent capacitors with Al2O3-TiO2-Al2O3 dielectrics were fabricated on the composite electrodes and demonstrated a capacitance density of 10.1 fF μm(-2), which was significantly higher than that of capacitors with AlZnO electrodes (8.8 fF μm(-1)). The capacitance density remained almost unchanged in a broad frequency range from 3 kHz to 1 MHz. Moreover, a low leakage current density of 2.4 × 10(-7) A cm(-2) at 1 V was achieved. Transparent and flexible capacitors were also fabricated using the composite electrodes, and demonstrated an improved bendability. The transparent capacitors showed an average optical transmittance over 70% in the visible range, and thus open the door to practical applications in transparent integrated circuits.

  13. 3D-PRINTING OF TRANSPARENT BIO-MICROFLUIDIC DEVICES IN PEG-DA

    PubMed Central

    Urrios, Arturo; Parra-Cabrera, Cesar; Bhattacharjee, Nirveek; Gonzalez-Suarez, Alan M.; Rigat-Brugarolas, Luis G.; Nallapatti, Umashree; Samitier, Josep; DeForest, Cole A.; Posas, Francesc; Garcia-Cordero, José L.; Folch, Albert

    2016-01-01

    The vast majority of microfluidic systems are molded in poly(dimethylsiloxane) (PDMS) by soft lithography due to the favorable properties of PDMS: biocompatible, elastomeric, transparent, gas-permeable, inexpensive, and copyright-free. However, PDMS molding involves tedious manual labor, which makes PDMS devices prone to assembly failures and difficult to disseminate to research and clinical settings. Furthermore, the fabrication procedures limit the 3D complexity of the devices to layered designs. Stereolithography (SL), a form of 3D-printing, has recently attracted attention as a way to customize the fabrication of biomedical devices due to its automated, assembly-free 3D fabrication, rapidly decreasing costs, and fast-improving resolution and throughput. However, existing SL resins are not biocompatible and patterning transparent resins at high resolution remains difficult. Here we report procedures for the preparation and patterning of a transparent resin based on low-MW poly(ethylene glycol) diacrylate (MW 250) (PEG-DA-250). The 3D-printed devices are highly transparent and cells can be cultured on PEG-DA-250 prints for several days. This biocompatible SL resin and printing process solves some of the main drawbacks of 3D-printed microfluidic devices: biocompatibility and transparency. In addition, it should also enable the production of non-microfluidic biomedical devices. PMID:27217203

  14. Descriptive Analysis of the Instructional Control of Teachers in a Classroom of Students with Behavioral Disorders

    ERIC Educational Resources Information Center

    Eldar, Eitan; Ayvazo, Shiri; Hirschmann, Michal

    2018-01-01

    Classroom management still remains a topic of major apprehension for teachers, and especially for those teaching students who display challenging behaviors. This paper presents an empirical examination that supplemented an exceptional project of the ministry of education in a small Middle-East country to support students with severe problem…

  15. Slip casting nano-particle powders for making transparent ceramics

    DOEpatents

    Kuntz, Joshua D [Livermore, CA; Soules, Thomas F [Livermore, CA; Landingham, Richard Lee [Livermore, CA; Hollingsworth, Joel P [Oakland, CA

    2011-04-12

    A method of making a transparent ceramic including the steps of providing nano-ceramic powders in a processed or unprocessed form, mixing the powders with de-ionized water, the step of mixing the powders with de-ionized water producing a slurry, sonifing the slurry to completely wet the powder and suspend the powder in the de-ionized water, separating very fine particles from the slurry, molding the slurry, and curing the slurry to produce the transparent ceramic.

  16. Toward transparent and self-activated graphene harmonic transponder sensors

    NASA Astrophysics Data System (ADS)

    Huang, Haiyu Harry; Sakhdari, Maryam; Hajizadegan, Mehdi; Shahini, Ali; Akinwande, Deji; Chen, Pai-Yen

    2016-04-01

    We propose the concept and design of a transparent, flexible, and self-powered wireless sensor comprising a graphene-based sensor/frequency-modulator circuitry and a graphene antenna. In this all-graphene device, the multilayered-graphene antenna receives the fundamental tone at C band and retransmits the frequency-modulated sensed signal (harmonic tone) at X band. The frequency orthogonality between the received/re-transmitted signals may enable high-performance sensing in severe interference/clutter background. Here, a fully passive, quad-ring frequency multiplier is proposed using graphene field-effect transistors, of which the unique ambipolar charge transports render a frequency doubling effect with conversion gain being chemically sensitive to exposed gas/molecular/chemical/infectious agents. This transparent, light-weight, and self-powered system may potentially benefit a number of wireless sensing and diagnosis applications, particularly for smart contact lenses/glasses and microscope slides that require high optical transparency.

  17. Highly Transparent Compositionally Graded Buffers for New Metamorphic Multijunction Solar Cell Designs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schulte, Kevin L.; France, Ryan M.; Geisz, John F.

    The development of compositionally graded buffer layers (CGBs) with enhanced transparency would enable novel five and six junction solar cells, with efficiencies approaching 50% under high concentration. Here, we demonstrate highly transparent grades between the GaAs and InP lattice constants on both A- and B-miscut GaAs substrates, employing Al xGayIn 1-x-yAs and highly Se-doped Burstein-Moss (BM) shifted Ga xIn 1-xP. Transparency to >810 and >890 nm wavelengths is demonstrated with BM-shifted Ga xIn 1-xP on B-miscut substrates and Al xGayIn 1-x-yAs/Ga xIn 1-xP(Se) combined grades on A-miscut substrates, respectively. 0.74 eV GaInAs solar cells grown on these transparent CGBs exhibitmore » Woc = 0.41 V at mA/ cm 2, performance comparable with the state-of-the-art Ga xIn 1-xP grade employed in the four-junction-inverted metamorphic multijunction (IMM) cell. A GaAs/0.74cV GaInAs tandem cell was grown with a transparent BM-shifted Ga xIn 1-xP CGB to verify the CGB performance in a multijunction device structure. Quantum efficiency measurements indicate that the CGB is completely transparent to photons below the GaAs bandedge, validating its use in 4-6 junction IMM devices with a single-graded buffer. Furthermore, this tandem represents a highly efficient two-junction band gap combination, achieving 29.6% ± 1.2% efficiency under the AM1.5 global spectrum, demonstrating how the additional transparency enables new device structures.« less

  18. Highly Transparent Compositionally Graded Buffers for New Metamorphic Multijunction Solar Cell Designs

    DOE PAGES

    Schulte, Kevin L.; France, Ryan M.; Geisz, John F.

    2016-11-11

    The development of compositionally graded buffer layers (CGBs) with enhanced transparency would enable novel five and six junction solar cells, with efficiencies approaching 50% under high concentration. Here, we demonstrate highly transparent grades between the GaAs and InP lattice constants on both A- and B-miscut GaAs substrates, employing Al xGayIn 1-x-yAs and highly Se-doped Burstein-Moss (BM) shifted Ga xIn 1-xP. Transparency to >810 and >890 nm wavelengths is demonstrated with BM-shifted Ga xIn 1-xP on B-miscut substrates and Al xGayIn 1-x-yAs/Ga xIn 1-xP(Se) combined grades on A-miscut substrates, respectively. 0.74 eV GaInAs solar cells grown on these transparent CGBs exhibitmore » Woc = 0.41 V at mA/ cm 2, performance comparable with the state-of-the-art Ga xIn 1-xP grade employed in the four-junction-inverted metamorphic multijunction (IMM) cell. A GaAs/0.74cV GaInAs tandem cell was grown with a transparent BM-shifted Ga xIn 1-xP CGB to verify the CGB performance in a multijunction device structure. Quantum efficiency measurements indicate that the CGB is completely transparent to photons below the GaAs bandedge, validating its use in 4-6 junction IMM devices with a single-graded buffer. Furthermore, this tandem represents a highly efficient two-junction band gap combination, achieving 29.6% ± 1.2% efficiency under the AM1.5 global spectrum, demonstrating how the additional transparency enables new device structures.« less

  19. Price and quality transparency: how effective for health care reform?

    PubMed

    Nyman, John A; Li, Chia-Hsuan W

    2009-07-01

    Many in Minnesota and the United States are promoting price and quality transparency as a means for reforming health care. The assumption is that with such information, consumers and providers would be motivated to change their behavior and this would lead to lower costs and higher-quality care.This article attempts to determine the extent to which publicizing information about the cost and quality of medical care does, in fact, improve quality and lower costs, and thus should be included in any reform strategy. The authors reviewed a number of studies and concluded that there is a general lack of empirical evidence on the effect of price transparency on health care costs and that the evidence on the effectiveness of quality transparency is mixed.

  20. What Do Graded Effects of Semantic Transparency Reveal about Morphological Processing?

    ERIC Educational Resources Information Center

    Feldman, Laurie Beth; Soltano, Emily G.; Pastizzo, Matthew J.; Francis, Sarah E.

    2004-01-01

    We examined the influence of semantic transparency on morphological facilitation in English in three lexical decision experiments. Decision latencies to visual targets (e.g., CASUALNESS) were faster after semantically transparent (e.g., CASUALLY) than semantically opaque (e.g., CASUALTY) primes whether primes were auditory and presented…

  1. Transparent resistive switching memory using aluminum oxide on a flexible substrate

    NASA Astrophysics Data System (ADS)

    Yeom, Seung-Won; Shin, Sang-Chul; Kim, Tan-Young; Ha, Hyeon Jun; Lee, Yun-Hi; Shim, Jae Won; Ju, Byeong-Kwon

    2016-02-01

    Resistive switching memory (ReRAM) has attracted much attention in recent times owing to its fast switching, simple structure, and non-volatility. Flexible and transparent electronic devices have also attracted considerable attention. We therefore fabricated an Al2O3-based ReRAM with transparent indium-zinc-oxide (IZO) electrodes on a flexible substrate. The device transmittance was found to be higher than 80% in the visible region (400-800 nm). Bended states (radius = 10 mm) of the device also did not affect the memory performance because of the flexibility of the two transparent IZO electrodes and the thin Al2O3 layer. The conduction mechanism of the resistive switching of our device was explained by ohmic conduction and a Poole-Frenkel emission model. The conduction mechanism was proved by oxygen vacancies in the Al2O3 layer, as analyzed by x-ray photoelectron spectroscopy analysis. These results encourage the application of ReRAM in flexible and transparent electronic devices.

  2. You Asked, We Answered! A Podcasting Series by Scientists for K-12 Teachers Through the Pennsylvania Earth Science Teachers Association (PAESTA)

    NASA Astrophysics Data System (ADS)

    Guertin, L. A.; Tait, K.

    2015-12-01

    The Pennsylvania Earth Science Teachers Association (PAESTA) recently initiated a podcasting series "You Asked, We Answered!" for K-12 teachers to increase their science content knowledge through short audio podcasts, supplemented with relevant resources. The 2015-2016 PAESTA President Kathy Tait generated the idea of tapping in to the content expertise of higher education faculty, post-doctoral researchers, and graduate students to assist K-12 teachers with increasing their own Earth and space content knowledge. As time and resources for professional development are decreasing for K-12 teachers, PAESTA is committed to not only providing curricular resources through our online database of inquiry-based exercises in the PAESTA Classroom, but providing an opportunity to learn science content from professionals in an audio format.Our goal at PAESTA has been to release at least one new podcast per month that answers the questions asked by PAESTA members. Each podcast is recorded by an Earth/space science professional with content expertise and placed online with supporting images, links, and relevant exercises found in the PAESTA Classroom. Each podcast is available through the PAESTA website (http://www.paesta.psu.edu/podcasts) and PAESTA iTunes channel (https://itunes.apple.com/us/podcast/paesta-podcasts/id1017828453). For ADA compliance, the PAESTA website has a transcript for each audio file. In order to provide these podcasts, we need the participation of both K-12 teachers and science professionals. On the PAESTA Podcast website, K-12 teachers can submit discipline questions for us to pass along to our content experts, questions relating to the "what" and "how" of the Earth and space sciences, as well as questions about Earth and space science careers. We ask science professionals for help in answering the questions posed by teachers. We include online instructions and tips to help scientists generate their podcast and supporting materials.

  3. A new optically transparent silicon containing polyimide film

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kumar, D.; Gupta, A.D.

    1995-12-31

    A new optically transparent, heat-resistant, flexible silicon containing polyimide (PI)(SIDA-BAPB) film has been developed. It was characterized by UV-Visible, FT-IR, differential scanning calorimetery (DSC), thermomechanical analysis (TMA) and thermogravimetric (TGA) analysis. The developed film showed high optical transparency in the 350-600 nm range of electromagnetic spectrum. The DSC analysis of the film showed glass transition temperature (T{sub g}) at 200{degrees}C. The dynamic thermogravimetric analysis (TGA) demonstrated its polymer decomposition temperature at 425{degrees}C. The char yield of the amorphous film in nitrogen at 800{degrees}C was 61%.

  4. Transparent Seismic Mitigation for Community Resilience

    NASA Astrophysics Data System (ADS)

    Poland, C. D.; Pekelnicky, R.

    2008-12-01

    Healthy communities continuously grow by leveraging their intellectual capital to drive economic development while protecting their cultural heritage. Success, in part, depends on the support of a healthy built environment that is rooted in contemporary urban planning, sustainability and disaster resilience. Planners and policy makers are deeply concerned with all aspects of their communities, including its seismic safety. Their reluctance to implement the latest plans for achieving seismic safety is rooted in a misunderstanding of the hazard they face and the risk it poses to their built environment. Probabilistic lingo and public debate about how big the "big one" will be drives them to resort to their own experience and intuition. There is a fundamental lack of transparency related to what is expected to happen, and it is partially blocking the policy changes that are needed. The solution: craft the message in broad based, usable terms that name the hazard, defines performance, and establishes a set of performance goals that represent the resiliency needed to drive a community's natural ability to rebound from a major seismic event. By using transparent goals and measures with an intuitive vocabulary for both performance and hazard, earthquake professionals, working with the San Francisco Urban Planning and Research Association (SPUR), have defined a level of resiliency that needs to be achieved by the City of San Francisco to assure their response to an event will be manageable and full recovery achievable within three years. Five performance measures for buildings and three for lifeline systems have been defined. Each declares whether people will be safe inside, whether the building will be able to be repaired and whether they will be usable during repairs. Lifeline systems are further defined in terms of the time intervals to restore 90%, 95%, and full service. These transparent categories are used in conjunction with the expected earthquake level to describe

  5. The Goals and Development of an Interactive Web Module for a Teacher Education Course.

    ERIC Educational Resources Information Center

    Schnorr, Donna; Bracken, Nicole; Hazari, Sunil

    The World Wide Web has become a promising medium for delivery of instruction. This paper describes a case study in which the Internet was used to supplement teacher education course instruction via an Interactive Web module. The goals of using such a medium for facilitating teaching and enhancing learning are described as they relate to learning…

  6. Tunable optical analog to electromagnetically induced transparency in graphene-ring resonators system

    PubMed Central

    Wang, Yonghua; Xue, Chenyang; Zhang, Zengxing; Zheng, Hua; Zhang, Wendong; Yan, Shubin

    2016-01-01

    The analogue of electromagnetically induced transparency in optical ways has shown great potential in optical delay and quantum-information technology due to its flexible design and easy implementation. The chief drawback for these devices is the bad tunability. Here we demonstrate a tunable optical transparency system formed by graphene-silicon microrings which could control the transparent window by electro-optical means. The device consists of cascaded coupled ring resonators and a graphene/graphene capacitor which integrated on one of the rings. By tuning the Fermi level of the graphene sheets, we can modulate the round-trip ring loss so that the transparency window can be dynamically tuned. The results provide a new method for the manipulation and transmission of light in highly integrated optical circuits and quantum information storage devices. PMID:27941895

  7. Tunable optical analog to electromagnetically induced transparency in graphene-ring resonators system.

    PubMed

    Wang, Yonghua; Xue, Chenyang; Zhang, Zengxing; Zheng, Hua; Zhang, Wendong; Yan, Shubin

    2016-12-12

    The analogue of electromagnetically induced transparency in optical ways has shown great potential in optical delay and quantum-information technology due to its flexible design and easy implementation. The chief drawback for these devices is the bad tunability. Here we demonstrate a tunable optical transparency system formed by graphene-silicon microrings which could control the transparent window by electro-optical means. The device consists of cascaded coupled ring resonators and a graphene/graphene capacitor which integrated on one of the rings. By tuning the Fermi level of the graphene sheets, we can modulate the round-trip ring loss so that the transparency window can be dynamically tuned. The results provide a new method for the manipulation and transmission of light in highly integrated optical circuits and quantum information storage devices.

  8. Transparent actuators and robots based on single-layer superaligned carbon nanotube sheet and polymer composites

    NASA Astrophysics Data System (ADS)

    Chen, Luzhuo; Weng, Mingcen; Zhang, Wei; Zhou, Zhiwei; Zhou, Yi; Xia, Dan; Li, Jiaxin; Huang, Zhigao; Liu, Changhong; Fan, Shoushan

    2016-03-01

    Transparent actuators have been attracting emerging interest recently, as they demonstrate potential applications in the fields of invisible robots, tactical displays, variable-focus lenses, and flexible cellular phones. However, previous technologies did not simultaneously realize macroscopic transparent actuators with advantages of large-shape deformation, low-voltage-driven actuation and fast fabrication. Here, we develop a fast approach to fabricate a high-performance transparent actuator based on single-layer superaligned carbon nanotube sheet and polymer composites. Various advantages of single-layer nanotube sheets including high transparency, considerable conductivity, and ultra-thin dimensions together with selected polymer materials completely realize all the above required advantages. Also, this is the first time that a single-layer nanotube sheet has been used to fabricate actuators with high transparency, avoiding the structural damage to the single-layer nanotube sheet. The transparent actuator shows a transmittance of 72% at the wavelength of 550 nm and bends remarkably with a curvature of 0.41 cm-1 under a DC voltage for 5 s, demonstrating a significant advance in technological performances compared to previous conventional actuators. To illustrate their great potential usage, a transparent wiper and a humanoid robot ``hand'' were elaborately designed and fabricated, which initiate a new direction in the development of high-performance invisible robotics and other intelligent applications with transparency.Transparent actuators have been attracting emerging interest recently, as they demonstrate potential applications in the fields of invisible robots, tactical displays, variable-focus lenses, and flexible cellular phones. However, previous technologies did not simultaneously realize macroscopic transparent actuators with advantages of large-shape deformation, low-voltage-driven actuation and fast fabrication. Here, we develop a fast approach to

  9. Medicare payment transparency

    PubMed Central

    Jones, Lyell K.; Craft, Karolina; Fritz, Joseph V.

    2016-01-01

    Abstract In 2014, the Centers for Medicare and Medicaid Services began a now annual process of releasing payment data made to physicians and other providers from Medicare Part B. The unprecedented availability of detailed payment information has generated considerable interest among policymakers, the public, and the media, and raised concerns from a number of physician groups. In the current climate of financial transparency, publication of Medicare payment data will likely continue. In an effort to prepare neurologists for future releases of payment data, we review the background, limitations, potential benefits, and appropriate responses to Medicare payment data releases. PMID:29443257

  10. Highly Efficient and Reliable Transparent Electromagnetic Interference Shielding Film.

    PubMed

    Jia, Li-Chuan; Yan, Ding-Xiang; Liu, Xiaofeng; Ma, Rujun; Wu, Hong-Yuan; Li, Zhong-Ming

    2018-04-11

    Electromagnetic protection in optoelectronic instruments such as optical windows and electronic displays is challenging because of the essential requirements of a high optical transmittance and an electromagnetic interference (EMI) shielding effectiveness (SE). Herein, we demonstrate the creation of an efficient transparent EMI shielding film that is composed of calcium alginate (CA), silver nanowires (AgNWs), and polyurethane (PU), via a facile and low-cost Mayer-rod coating method. The CA/AgNW/PU film with a high optical transmittance of 92% achieves an EMI SE of 20.7 dB, which meets the requirements for commercial shielding applications. A superior EMI SE of 31.3 dB could be achieved, whereas the transparent film still maintains a transmittance of 81%. The integrated efficient EMI SE and high transmittance are superior to those of most previously reported transparent EMI shielding materials. Moreover, our transparent films exhibit a highly reliable shielding ability in a complex service environment, with 98 and 96% EMI SE retentions even after 30 min of ultrasound treatment and 5000 bending cycles (1.5 mm radius), respectively. The comprehensive performance that is associated with the facile fabrication strategy imparts the CA/AgNW/PU film with great potential as an optimized EMI shielding material in emerging optoelectronic devices, such as flexible solar cells, displays, and touch panels.

  11. Dietary Supplements

    MedlinePlus

    Dietary supplements are vitamins, minerals, herbs, and many other products. They can come as pills, capsules, powders, drinks, ... possible Tell your health care provider about any dietary supplements you use Do not take a bigger dose ...

  12. Transparent, wear-resistant, superhydrophobic and superoleophobic poly(dimethylsiloxane) (PDMS) surfaces.

    PubMed

    Martin, Samuel; Bhushan, Bharat

    2017-02-15

    Superoleophobic surfaces that exhibit self-cleaning, antifouling, low-drag, and anti-smudge properties with high transparency are of interest in industrial applications including optical devices, solar panels, and self-cleaning windows. In many superoleophobic surfaces created to date, the lack of mechanical durability has been an issue. In this work, for the first time, transparent, wear-resistant, superhydrophobic and superoleophobic surfaces were developed for polydimethylsiloxane (PDMS) using a simple and scalable fabrication technique. PDMS is of importance in biomedical applications as it is biocompatible, chemically stable, and transparent. PDMS was made superhydrophobic either through micropatterning or an applied coating of hydrophobic SiO 2 nanoparticles with a binder of methylphenyl silicone resin. Through the addition of fluorination via fluorosilane, the nanoparticle/binder coating was made superoleophobic. Intermediate steps using ultraviolet-ozone treatment were required for improved deposition and adhesion of the coatings. The effects of surface treatments were examined through contact angle and tilt angle measurements. The coating was found to have re-entrant geometries desirable for superoleophobicity and to exhibit mechanical wear resistance and transparent properties. Copyright © 2016 Elsevier Inc. All rights reserved.

  13. Development of a Novel Transparent Flexible Capacitive Micromachined Ultrasonic Transducer

    PubMed Central

    Pang, Da-Chen; Chang, Cheng-Min

    2017-01-01

    This paper presents the world’s first transparent flexible capacitive micromachined ultrasonic transducer (CMUT) that was fabricated through a roll-lamination technique. This polymer-based CMUT has advantages of transparency, flexibility, and non-contacting detection which provide unique functions in display panel applications. Comprising an indium tin oxide-polyethylene terephthalate (ITO-PET) substrate, SU-8 sidewall and vibrating membranes, and silver nanowire transparent electrode, the transducer has visible-light transmittance exceeding 80% and can operate on curved surfaces with a 40 mm radius of curvature. Unlike the traditional silicon-based high temperature process, the CMUT can be fabricated on a flexible substrate at a temperature below 100 °C to reduce residual stress introduced at high temperature. The CMUT on the curved surfaces can detect a flat target and finger at distances up to 50 mm and 40 mm, respectively. The transparent flexible CMUT provides a better human-machine interface than existing touch panels because it can be integrated with a display panel for non-contacting control in a health conscious environment and the flexible feature is critical for curved display and wearable electronics. PMID:28632157

  14. Information Transparency in Education: Three Sides of a Two-Sided Process

    ERIC Educational Resources Information Center

    Mertsalova, T. A.

    2015-01-01

    Information transparency is the result of informational globalization and the avalanche of information and communication technologies: thus, these processes are natural for the whole modern society. Statistics show that during the past several years the transparency situation not just in education but in the entire society has expanded…

  15. Exploring emotional climate in preservice science teacher education

    NASA Astrophysics Data System (ADS)

    Bellocchi, Alberto; Ritchie, Stephen M.; Tobin, Kenneth; Sandhu, Maryam; Sandhu, Satwant

    2013-09-01

    Classroom emotional climates (ECs) are interrelated with students' engagement with university courses. Despite growing interest in emotions and EC research, little is known about the ways in which social interactions and different subject matter mediate ECs in preservice science teacher education classes. In this study we investigated the EC and associated classroom interactions in a preservice science teacher education class. We were interested in the ways in which salient classroom interactions were related to the EC during lessons centered on debates about science-based issues (e.g., nuclear energy alternatives). Participants used audience response technology to indicate their perceptions of the EC. Analysis of conversation for salient video clips and analysis of non-verbal conduct (acoustic parameters, body movements, and facial expressions) supplemented EC data. One key contribution that this study makes to preservice science teacher education is to identify the micro-processes of successful and unsuccessful class interactions that were associated with positive and neutral EC. The structure of these interactions can inform the practice of other science educators who wish to produce positive ECs in their classes. The study also extends and explicates the construct of intensity of EC.

  16. Graphene and silver-nanoprism dispersion for printing optically-transparent electrodes

    NASA Astrophysics Data System (ADS)

    Sinar, Dogan; Knopf, George K.; Nikumb, Suwas

    2017-02-01

    Optically transparent electrodes (OTEs) are used for bioelectronics, touch screens, visual displays, and photovoltaic cells. Although the conductive coating for these electrodes is often composed of indium tin oxide (ITO), indium is a very expensive material and thin ITO films are relatively brittle compared to conductive polymer or graphene thin films. An alternative highly conductive optically transparent thin film based on a graphene (G) and silver-nanoprism (AgNP) dispersion is introduced in this paper. The aqueous G ink is first synthesized using carboxymethyl cellulose (CMC) as a stabilizing agent. Silver (Ag) nanoprisms are then prepared separately by a simple thermal process which involves the reduction of silver nitrate by sodium borohydride. These Ag nanoprisms are only a few nanometers thick but have relatively large surface areas (>1000 nm2). As a consequence, the nanoprisms provide more efficient injection of free carriers to the G layer. The concentrated G-AgNP dispersions are then deposited on optically transparent glass and polyimide substrates using an inkjet printer with a HP6602A print head. After printing, these optically thin films can be thermally treated to further increase electrical conductivity. Thermal treatment decomposes CMC which frees elemental carbon from polymer chain and, simultaneously, causes the film to become hydrophobic. Preliminary experiments demonstrate that the G-AgNP films on glass substrates exhibit high conductivity at 70% transparency (550 nm). Additional tests on the Gr-AgNP thin films printed on polymide substrates show mechanical stability under bending with minimal reduction in electrical conductivity or optical transparency.

  17. Jelly Jam, the People Preserver. Teaching Guide. An Environmental Manual for Teachers and Parents. Revised Edition.

    ERIC Educational Resources Information Center

    Friedman, Judi

    Designed for teachers of students in grades 2 through 4, this teaching guide for a self-teaching, interdisciplinary reading and activity program comprises a complete supplemental reading, science, and social studies approach to the problems of environmental pollution. Jelly Jam, a caring little animal, helps children understand how air, water, and…

  18. Career Oriented Mathematics, Teacher's Manual. [Includes Scale; Apprenticeship: Learning to be a Cement Mason; Textiles; Being Self-Employed: Harvesting and Sale of Pulpwood; and Lumber Yard Employee.

    ERIC Educational Resources Information Center

    Mahaffey, Michael L.; McKillip, William D.

    This manual is designed for teachers using units in the Career Oriented Mathematics Program titled: (1) Scale, (2) Apprenticeship: Learning to be a Cement Mason, (3) Textiles, (4) Being Self-Employed: Harvesting and Sale of Pulpwood, and (5) Lumber Yard Employee. Lesson plans, masters for dittos and transparencies, and problem solutions are…

  19. Energy Dependence of Nuclear Transparency in C (p,2p) Scattering

    NASA Astrophysics Data System (ADS)

    Leksanov, A.; Alster, J.; Asryan, G.; Averichev, Y.; Barton, D.; Baturin, V.; Bukhtoyarova, N.; Carroll, A.; Heppelmann, S.; Kawabata, T.; Makdisi, Y.; Malki, A.; Minina, E.; Navon, I.; Nicholson, H.; Ogawa, A.; Panebratsev, Yu.; Piasetzky, E.; Schetkovsky, A.; Shimanskiy, S.; Tang, A.; Watson, J. W.; Yoshida, H.; Zhalov, D.

    2001-11-01

    The transparency of carbon for (p,2p) quasielastic events was measured at beam momenta ranging from 5.9 to 14.5 GeV/c at 90° c.m. The four-momentum transfer squared (Q2) ranged from 4.7 to 12.7 (GeV/c)2. We present the observed beam momentum dependence of the ratio of the carbon to hydrogen cross sections. We also apply a model for the nuclear momentum distribution of carbon to obtain the nuclear transparency. We find a sharp rise in transparency as the beam momentum is increased to 9 GeV/c and a reduction to approximately the Glauber level at higher energies.

  20. Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications

    PubMed Central

    Fu, Fan; Feurer, Thomas; Jäger, Timo; Avancini, Enrico; Bissig, Benjamin; Yoon, Songhak; Buecheler, Stephan; Tiwari, Ayodhya N.

    2015-01-01

    Semi-transparent perovskite solar cells are highly attractive for a wide range of applications, such as bifacial and tandem solar cells; however, the power conversion efficiency of semi-transparent devices still lags behind due to missing suitable transparent rear electrode or deposition process. Here we report a low-temperature process for efficient semi-transparent planar perovskite solar cells. A hybrid thermal evaporation–spin coating technique is developed to allow the introduction of PCBM in regular device configuration, which facilitates the growth of high-quality absorber, resulting in hysteresis-free devices. We employ high-mobility hydrogenated indium oxide as transparent rear electrode by room-temperature radio-frequency magnetron sputtering, yielding a semi-transparent solar cell with steady-state efficiency of 14.2% along with 72% average transmittance in the near-infrared region. With such semi-transparent devices, we show a substantial power enhancement when operating as bifacial solar cell, and in combination with low-bandgap copper indium gallium diselenide we further demonstrate 20.5% efficiency in four-terminal tandem configuration. PMID:26576667

  1. Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications.

    PubMed

    Fu, Fan; Feurer, Thomas; Jäger, Timo; Avancini, Enrico; Bissig, Benjamin; Yoon, Songhak; Buecheler, Stephan; Tiwari, Ayodhya N

    2015-11-18

    Semi-transparent perovskite solar cells are highly attractive for a wide range of applications, such as bifacial and tandem solar cells; however, the power conversion efficiency of semi-transparent devices still lags behind due to missing suitable transparent rear electrode or deposition process. Here we report a low-temperature process for efficient semi-transparent planar perovskite solar cells. A hybrid thermal evaporation-spin coating technique is developed to allow the introduction of PCBM in regular device configuration, which facilitates the growth of high-quality absorber, resulting in hysteresis-free devices. We employ high-mobility hydrogenated indium oxide as transparent rear electrode by room-temperature radio-frequency magnetron sputtering, yielding a semi-transparent solar cell with steady-state efficiency of 14.2% along with 72% average transmittance in the near-infrared region. With such semi-transparent devices, we show a substantial power enhancement when operating as bifacial solar cell, and in combination with low-bandgap copper indium gallium diselenide we further demonstrate 20.5% efficiency in four-terminal tandem configuration.

  2. The Notion of Adminstrative Transparency among Academic Leaderships at Jordanian Universities

    ERIC Educational Resources Information Center

    Jaradat, Mohammed Hasan

    2013-01-01

    The study aims at identifying the notion of transparency among academic leaderships at Jordanian universities. To this effect, the interview-based approach was used in order to delineate the concept of transparency. Eighty individual academic leaderships were interviewed across various schools in Jordan. Upon collection of data and information,…

  3. Transparency Master: Planaria in the Classroom.

    ERIC Educational Resources Information Center

    Jensen, Lauritz A.; Allen, A. Lester

    1983-01-01

    Background information on the morphology and physiology of planarians and uses of the organism in schools is provided. Also provided is a transparency master demonstrating a planarian with an everted proboscis, two-headed/two-tailed planarians, and a planarian demonstrating the digestive tract. (JN)

  4. Data Transparency | Distributed Generation Interconnection Collaborative |

    Science.gov Websites

    quality and availability are increasingly vital for reducing the costs of distributed generation completion in certain areas, increasing accountability for utility application processing. As distributed PV NREL, HECO, TSRG Improving Data Transparency for the Distributed PV Interconnection Process: Emergent

  5. Clear as glass: transparent financial reporting.

    PubMed

    Valletta, Robert M

    2005-08-01

    To be transparent, financial information needs to be easily accessible, timely, content-rich, and narrative. Not-for-profit hospitals and health systems should report detailed financial information quarterly. They need internal controls to reduce the level of complexity throughout the organization by creating standardized processes.

  6. Cellulose nanofibers/reduced graphene oxide flexible transparent conductive paper.

    PubMed

    Gao, Kezheng; Shao, Ziqiang; Wu, Xue; Wang, Xi; Li, Jia; Zhang, Yunhua; Wang, Wenjun; Wang, Feijun

    2013-08-14

    The cellulose nanofibers (CNFs) paper exhibit high visible light transmittance, high mechanical strength, and excellent flexibility. Therefore, CNFs paper may be an excellent substrate material for flexible transparent electronic devices. In this paper, we endeavor to prepare CNFs-based flexible transparent conductive paper by layer-by-layer (LbL) assembly using divalent copper ions (Cu(2+)) as the crosslinking agent. The thickness of the reduced graphene oxide (RGO) active layer in the CNFs paper can be controlled by the cycle times of the LbL assembly. CNFs/[RGO]20 paper has the sheet resistances of ∼2.5 kΩ/□, and the transmittance of about 76% at a wavelength of 550 nm. Furthermore, CNFs/[RGO]20 paper inherits the excellent mechanical properties of CNFs paper, and the ultimate strength is about 136 MPa. CNFs-based flexible transparent conductive paper also exhibits excellent electrical stability and flexibility. Copyright © 2013. Published by Elsevier Ltd.

  7. Transparent Democratic Foresight Strategies in the California EMF Program.

    PubMed

    Neutra, Raymond Richard; Delpizzo, Vincent

    2002-01-01

    A California Department of Health Services program dealt with possible health effects from Electric and Magnetic Fields (EMF) from power lines. With the advice of stakeholders, and well before any risk determinations were made, transparent policy analyses about the power grid and schools asked the question, "How confident must one be of how big an effect before one would adopt cheap or expensive EMF avoidance measures?" A risk evaluation was carried out with features that promoted transparency. It was formatted to provide a policy-neutral "degree of certainty of causality" to adherents of utilitarian, environmental justice, and libertarian policy frameworks. Though the program had many features advocated by adherents of the precautionary principle, it might be better characterized as following "Transparent Democratic Foresight Strategies," since no single principle justifies the strategies used in this participatory program, and it examined the pros and cons of options but made no recommendations, precautionary or otherwise.

  8. Highly transparent, low-haze, hybrid cellulose nanopaper as electrodes for flexible electronics.

    PubMed

    Xu, Xuezhu; Zhou, Jian; Jiang, Long; Lubineau, Gilles; Ng, Tienkhee; Ooi, Boon S; Liao, Hsien-Yu; Shen, Chao; Chen, Long; Zhu, J Y

    2016-06-16

    Paper is an excellent candidate to replace plastics as a substrate for flexible electronics due to its low cost, renewability and flexibility. Cellulose nanopaper (CNP), a new type of paper made of nanosized cellulose fibers, is a promising substrate material for transparent and flexible electrodes due to its potentially high transparency and high mechanical strength. Although CNP substrates can achieve high transparency, they are still characterized by high diffuse transmittance and small direct transmittance, resulting in high optical haze of the substrates. In this study, we proposed a simple methodology for large-scale production of high-transparency, low-haze CNP comprising both long cellulose nanofibrils (CNFs) and short cellulose nanocrystals (CNCs). By varying the CNC/CNF ratio in the hybrid CNP, we could tailor its total transmittance, direct transmittance and diffuse transmittance. By increasing the CNC content, the optical haze of the hybrid CNP could be decreased and its transparency could be increased. The direct transmittance and optical haze of the CNP were 75.1% and 10.0%, respectively, greatly improved from the values of previously reported CNP (31.1% and 62.0%, respectively). Transparent, flexible electrodes were fabricated by coating the hybrid CNP with silver nanowires (AgNWs). The electrodes showed a low sheet resistance (minimum 1.2 Ω sq(-1)) and a high total transmittance (maximum of 82.5%). The electrodes were used to make a light emitting diode (LED) assembly to demonstrate their potential use in flexible displays.

  9. Evidence for the onset of color transparency in ρ0 electroproduction off nuclei

    NASA Astrophysics Data System (ADS)

    CLAS Collaboration; El Fassi, L.; Zana, L.; Hafidi, K.; Holtrop, M.; Mustapha, B.; Brooks, W. K.; Hakobyan, H.; Zheng, X.; Adhikari, K. P.; Adikaram, D.; Aghasyan, M.; Amaryan, M. J.; Anghinolfi, M.; Arrington, J.; Avakian, H.; Baghdasaryan, H.; Battaglieri, M.; Batourine, V.; Bedlinskiy, I.; Biselli, A. S.; Bookwalter, C.; Branford, D.; Briscoe, W. J.; Bültmann, S.; Burkert, V. D.; Carman, D. S.; Celentano, A.; Chandavar, S.; Cole, P. L.; Contalbrigo, M.; Crede, V.; D'Angelo, A.; Daniel, A.; Dashyan, N.; De Vita, R.; De Sanctis, E.; Deur, A.; Dey, B.; Dickson, R.; Djalali, C.; Dodge, G. E.; Doughty, D.; Dupre, R.; Egiyan, H.; El Alaoui, A.; Elouadrhiri, L.; Eugenio, P.; Fedotov, G.; Fegan, S.; Gabrielyan, M. Y.; Garçon, M.; Gevorgyan, N.; Gilfoyle, G. P.; Giovanetti, K. L.; Girod, F. X.; Goetz, J. T.; Gohn, W.; Golovatch, E.; Gothe, R. W.; Griffioen, K. A.; Guidal, M.; Guo, L.; Hanretty, C.; Heddle, D.; Hicks, K.; Holt, R. J.; Hyde, C. E.; Ilieva, Y.; Ireland, D. G.; Ishkhanov, B. S.; Isupov, E. L.; Jawalkar, S. S.; Keller, D.; Khandaker, M.; Khetarpal, P.; Kim, A.; Kim, W.; Klein, A.; Klein, F. J.; Kubarovsky, V.; Kuhn, S. E.; Kuleshov, S. V.; Kuznetsov, V.; Laget, J. M.; Lu, H. Y.; MacGregor, I. J. D.; Mao, Y.; Markov, N.; Mayer, M.; McAndrew, J.; McKinnon, B.; Meyer, C. A.; Mineeva, T.; Mirazita, M.; Mokeev, V.; Moreno, B.; Moutarde, H.; Munevar, E.; Nadel-Turonski, P.; Ni, A.; Niccolai, S.; Niculescu, G.; Niculescu, I.; Osipenko, M.; Ostrovidov, A. I.; Pappalardo, L. L.; Paremuzyan, R.; Park, K.; Park, S.; Pasyuk, E.; Anefalos Pereira, S.; Phelps, E.; Pozdniakov, S.; Price, J. W.; Procureur, S.; Protopopescu, D.; Raue, B. A.; Reimer, P. E.; Ricco, G.; Rimal, D.; Ripani, M.; Ritchie, B. G.; Rosner, G.; Rossi, P.; Sabatié, F.; Saini, M. S.; Salgado, C.; Schott, D.; Schumacher, R. A.; Seraydaryan, H.; Sharabian, Y. G.; Smith, E. S.; Smith, G. D.; Sober, D. I.; Sokhan, D.; Stepanyan, S. S.; Stepanyan, S.; Stoler, P.; Strauch, S.; Taiuti, M.; Tang, W.; Taylor, C. E.; Tedeschi, D. J.; Tkachenko, S.; Ungaro, M.; Vernarsky, B.; Vineyard, M. F.; Voskanyan, H.; Voutier, E.; Watts, D.; Weinstein, L. B.; Weygand, D. P.; Wood, M. H.; Zachariou, N.; Zhao, B.; Zhao, Z. W.

    2012-06-01

    We have measured the nuclear transparency of the incoherent diffractive A(e,e‧ρ0) process in 12C and 56Fe targets relative to 2H using a 5 GeV electron beam. The nuclear transparency, the ratio of the produced ρ0's on a nucleus relative to deuterium, which is sensitive to ρA interaction, was studied as function of the coherence length (lc), a lifetime of the hadronic fluctuation of the virtual photon, and the four-momentum transfer squared (Q2). While the transparency for both 12C and 56Fe showed no lc dependence, a significant Q2 dependence was measured, which is consistent with calculations that included the color transparency effects.

  10. Test of the cosmic transparency with the standard candles and the standard ruler

    NASA Astrophysics Data System (ADS)

    Chen, Jun

    In this paper, the cosmic transparency is constrained by using the latest baryon acoustic oscillation (BAO) data and the type Ia supernova data with a model-independent method. We find that a transparent universe is consistent with observational data at the 1σ confidence level, except for the case of BAO+ Union 2.1 without the systematic errors where a transparent universe is favored only at the 2σ confidence level. To investigate the effect of the uncertainty of the Hubble constant on the test of the cosmic opacity, we assume h to be a free parameter and obtain that the observations favor a transparent universe at the 1σ confidence level.

  11. Highly Transparent and Conductive Metallized Nanofibers by Electrospinning and Electroplating

    NASA Astrophysics Data System (ADS)

    Yoon, Sam S.; Yarin, Alexander L.

    2017-11-01

    Transparent conducting films (TCFs) and transparent heaters (THs) are of interest for a wide variety of applications, from displays to window defrosters. Here, we demonstrate production of highly flexible, conducting, and transparent copper (Cu), nickel (Ni), platinum (Pt), and silver (Ag) nanofibers suitable for use not only in TCFs and THs but also in some other engineering applications. The merging of fibers at their intersections (i.e. self-junctioning) minimizes contact resistance in these films. These metallized nanofibers exhibited a remarkably low sheet resistance at a high optical transmittance. This low sheet resistance allows them to serve as low-voltage heaters, achieving a high heating temperature at a relatively low applied voltage. These nanofibers are free-standing, flexible, stretchable, and their mechanical reliability was confirmed through various mechanical endurance tests.

  12. The value of price transparency in residential solar photovoltaic markets

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    O'Shaughnessy, Eric; Margolis, Robert

    Installed prices for residential solar photovoltaic (PV) systems have declined significantly in recent years. However price dispersion and limited customer access to PV quotes prevents some prospective customers from obtaining low price offers. This study shows that improved customer access to prices - also known as price transparency - is a potential policy lever for further PV price reductions. We use customer search and strategic pricing theory to show that PV installation companies face incentives to offer lower prices in markets with more price transparency. We test this theoretical framework using a unique residential PV quote dataset. Our results showmore » that installers offer lower prices to customers that are expected to receive more quotes. Our study provides a rationale for policies to improve price transparency in residential PV markets.« less

  13. The value of price transparency in residential solar photovoltaic markets

    DOE PAGES

    O'Shaughnessy, Eric; Margolis, Robert

    2018-04-05

    Installed prices for residential solar photovoltaic (PV) systems have declined significantly in recent years. However price dispersion and limited customer access to PV quotes prevents some prospective customers from obtaining low price offers. This study shows that improved customer access to prices - also known as price transparency - is a potential policy lever for further PV price reductions. We use customer search and strategic pricing theory to show that PV installation companies face incentives to offer lower prices in markets with more price transparency. We test this theoretical framework using a unique residential PV quote dataset. Our results showmore » that installers offer lower prices to customers that are expected to receive more quotes. Our study provides a rationale for policies to improve price transparency in residential PV markets.« less

  14. Atomic-Layer-Deposited Transparent Electrodes for Silicon Heterojunction Solar Cells

    DOE PAGES

    Demaurex, Benedicte; Seif, Johannes P.; Smit, Sjoerd; ...

    2014-11-01

    We examine damage-free transparent-electrode deposition to fabricate high-efficiency amorphous silicon/crystalline silicon heterojunction solar cells. Such solar cells usually feature sputtered transparent electrodes, the deposition of which may damage the layers underneath. Using atomic layer deposition, we insert thin protective films between the amorphous silicon layers and sputtered contacts and investigate their effect on device operation. We find that a 20-nm-thick protective layer suffices to preserve, unchanged, the amorphous silicon layers beneath. Insertion of such protective atomic-layer-deposited layers yields slightly higher internal voltages at low carrier injection levels. However, we identify the presence of a silicon oxide layer, formed during processing,more » between the amorphous silicon and the atomic-layer-deposited transparent electrode that acts as a barrier, impeding hole and electron collection.« less

  15. 2007 Annual Health Physics Report for the HEU Transparency Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Radev, R

    2008-04-09

    During the 2007 calendar year, Lawrence Livermore National Laboratory (LLNL) provided health physics support for the Highly Enriched Uranium (HEU) Transparency Program for external and internal radiation protection and technical expertise related to BDMS radioactive sources and Russian radiation safety regulatory compliance. For the calendar year 2007, there were 172 person-trips that required dose monitoring of the U.S. monitors. Of the 172 person-trips, 160 person-trips were SMVs and 12 person-trips were Transparency Monitoring Office (TMO) trips. There were 12 monitoring visits by TMO monitors to facilities other than UEIE and 10 to UEIE itself. There were two monitoring visits (sourcemore » changes) that were back to back with 14 monitors. LLNL's Hazard Control Division laboratories provided the dosimetry services for the HEU Transparency monitors.« less

  16. Recognition and Transparency of Vocational Qualifications; The Way Forward. Discussion Paper = Anerkennung und Transparenz von beruflichen Befahigungsnachweisen; Neue Wege. Diskussionspapier = Reconnaissance et transparence des qualifications professionelles; La voie a suivre. Document de discussion. CEDEFOP Panorama.

    ERIC Educational Resources Information Center

    Bjornavold, Jens; Sellin, Burkart

    The European Union's most important challenge is to establish permanent, reliable methodologies and systems that support transparency and recognition of vocational qualifications. The concept of "transparency of qualifications" has replaced "recognition" and "comparability.""Transparency" points to the need…

  17. Transparency Film for Demonstration of Biaxial Optics.

    ERIC Educational Resources Information Center

    Camp, Paul R.

    1994-01-01

    Explains why transparency film demonstrates biaxial optical properties. Provides detailed descriptions of the procedure and equipment needed for large-scale optics demonstrations of the polarization interference pattern produced by biaxial crystals. (DDR)

  18. Optical and electrical properties of Cu-based all oxide semi-transparent photodetector

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kim, Hong-Sik; Patel, Malkeshkumar; Yadav, Pankaj

    2016-09-05

    Zero-bias operating Cu oxide-based photodetector was achieved by using large-scale available sputtering method. Cu oxide (Cu{sub 2}O or CuO) was used as p-type transparent layer to form a heterojunction by contacting n-type ZnO layer. All metal-oxide materials were employed to realize transparent device at room temperature and showed a high transparency (>75% at 600 nm) with excellent photoresponses. The structural, morphological, optical, and electrical properties of Cu oxides of CuO and Cu{sub 2}O are evaluated in depth by UV-visible spectrometer, X-ray diffraction, scanning electron microscopy, atomic force microscopy, Kelvin probe force microscopy, and Hall measurements. We may suggest a route ofmore » high-functional Cu oxide-based photoelectric devices for the applications in flexible and transparent electronics.« less

  19. Water transparency distribution under varied currents in the largest river-connected lake of China.

    PubMed

    Wang, Hua; Zhao, Yijun; Zhang, Zhizhang; Pang, Yong; Liang, Dongfang

    2017-01-01

    Water transparency is an important ecological indicator for shallow lakes. The largest shallow lake, Poyang Lake, as well as the most typical river-connected lake in China was selected as the research area. In view of the complicated water-sediment conditions induced by its frequent water exchange with external rivers, the dominant factors driving water transparency were determined against the field investigated data from 2003 to 2013 and a specific driving function was established. A numerical model coupling suspended sediment, Chl-a and chemical oxygen demand was developed and validated, and the spatial water transparency distributions under three typical current structures in Poyang Lake, Gravity-style, Jacking-style and Backflow-style, were quantitatively estimated. The following results stood out: water transparency in the lake varied distinctly with the current status; Backflow-style current was basically characterized by the lowest water transparency, while that under Jacking-style was the highest due to the lower sediment carrying capacity. In some outlying regions in the lake, where the water current is hardly influenced by the mainstream, the water transparency was always kept at a stable level.

  20. Tuneable complementary metamaterial structures based on graphene for single and multiple transparency windows

    PubMed Central

    Ding, Jun; Arigong, Bayaner; Ren, Han; Zhou, Mi; Shao, Jin; Lu, Meng; Chai, Yang; Lin, Yuankun; Zhang, Hualiang

    2014-01-01

    Novel graphene-based tunable plasmonic metamaterials featuring single and multiple transparency windows are numerically studied in this paper. The designed structures consist of a graphene layer perforated with quadrupole slot structures and dolmen-like slot structures printed on a substrate. Specifically, the graphene-based quadrupole slot structure can realize a single transparency window, which is achieved without breaking the structure symmetry. Further investigations have shown that the single transparency window in the proposed quadrupole slot structure is more likely originated from the quantum effect of Autler-Townes splitting. Then, by introducing a dipole slot to the quadrupole slot structure to form the dolmen-like slot structure, an additional transmission dip could occur in the transmission spectrum, thus, a multiple-transparency-window system can be achieved (for the first time for graphene-based devices). More importantly, the transparency windows for both the quadrupole slot and the dolmen-like slot structures can be dynamically controlled over a broad frequency range by varying the Fermi energy levels of the graphene layer (through electrostatic gating). The proposed slot metamaterial structures with tunable single and multiple transparency windows could find potential applications in many areas such as multiple-wavelength slow-light devices, active plasmonic switching, and optical sensing. PMID:25146672