LogSafe and Smart: Minnesota OSHA's LogSafe Program Takes Root.

ERIC Educational Resources Information Center

Honerman, James

1999-01-01

Logging is now the most dangerous U.S. occupation. The Occupational Safety and Health Administration (OSHA) developed specialized safety training for the logging industry but has been challenged to reach small operators. An OSHA-approved state program in Minnesota provides annual safety seminars to about two-thirds of the state's full-time…

OSHA 101: an introduction to OSHA for the occupational health nurse.

PubMed

Fell-Carlson, Deborah

2004-10-01

The OSHA standards become easy to use with experience. Occupational health nurses who are unfamiliar with the standards are better served to use them as a reference, rather than attempting to read the entire document. Many of the standards have booklets published to assist users in understanding the information. These booklets are available within the publications link of the OSHA website. Occupational health nurses who have taken the initiative to gain knowledge about OSHA and to become fluent in navigating the OSHA standards soon discover that the ability to access the information contained in the standards quickly is a marketable skill. Employers depend on occupational health nurses to develop comprehensive programs that achieve the goal of injury prevention and also meet compliance requirements. The standards contain a wealth of information to do just that.

OSHA: Employee Workplace Rights

DTIC Science & Technology

2000-01-01

illnesses and their related costs. To assist employers and employees in developing effective safety and health programs , OSHA published recommended Safety...workplace hazards and to implement safety and health programs . In so doing, this gave employees many new rights and responsibilities, including the right to...Administration Charles N. Jeffress, Assistant Secretary OSHA 3021 2000 (Reprinted) OSHA: Employee Workplace Rights Contents Contents iii Page

77 FR 22349 - OSHA Training Institute Education Center; Notice of Competition and Request for Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-13

... date to be determined. This notice also contains information on a proposal conference designed to... surveys from students in accordance with OSHA procedures and providing that data to OSHA within... recruitment materials that provide descriptive material about the courses. (iii) Describe ability to deliver...

A Critical Review of OSHA Heat Enforcement Cases: Lessons Learned.

PubMed

Arbury, Sheila; Lindsley, Matthew; Hodgson, Michael

2016-04-01

The aim of the study was to review the Occupational Safety and Health Administration's (OSHA) 2012 to 2013 heat enforcement cases, using identified essential elements of heat illness prevention to evaluate employers' programs and make recommendations to better protect workers from heat illness. (1) Identify essential elements of heat illness prevention; (2) develop data collection tool; and (3) analyze OSHA 2012 to 2013 heat enforcement cases. OSHA's database contains 84 heat enforcement cases in 2012 to 2013. Employer heat illness prevention programs were lacking in essential elements such as providing water and shade; adjusting the work/rest proportion to allow for workload and effective temperature; and acclimatizing and training workers. In this set of investigations, most employers failed to implement common elements of illness prevention programs. Over 80% clearly did not rely on national standard approaches to heat illness prevention.

Computer-Based Cognitive Tools in Teacher Training: The COG-TECH Projects

ERIC Educational Resources Information Center

Orhun, Emrah

2003-01-01

The COG-TECH (Cognitive Technologies for Problem Solving and Learning) Network conducted three international projects between 1994 and 2001 under the auspices of the European Commission. The main purpose of these projects was to train teacher educators in the Mediterranean countries to use computers as effective pedagogical tools. The summer…

All About OSHA

DTIC Science & Technology

2000-01-01

nation safe and healthful working conditions and to preserve our human resources .” Why is OSHA necessary? OSHA began because, until 1970, no uniform and...Secretary Puerto Rico Secretary of Labor and Human Resources Department of Labor and Human Resources Prudencio Rivera Martinez Building 505 Munoz...Kansas 7(c)(1) Consultation Program Kansas Department of Human Resources 512 South West 6th Street Topeka, KS 66603-3150 (785) 296-7476 Division of

OSHA and Experimental Safety Design.

ERIC Educational Resources Information Center

Sichak, Stephen, Jr.

1983-01-01

Suggests that a governmental agency, most likely Occupational Safety and Health Administration (OSHA) be considered in the safety design stage of any experiment. Focusing on OSHA's role, discusses such topics as occupational health hazards of toxic chemicals in laboratories, occupational exposure to benzene, and role/regulations of other agencies.…

OSHA Handbook for Small Businesses

DTIC Science & Technology

1996-01-01

1 ) Consultation Program Kansas Department of Human Resources 512 South West 6th Street Topeka, KS 66603-3150 (913) 296-7476 Kentucky Division of...Health Office Puerto Rico Department of Labor and Human Resources 505 Munoz Rivera Avenue, Hato Rey, PR 00918 (809) 754-2188 58 Rhode Island Division...OSHA Handbook for Small Businesses Safety Management Series U.S. Department of Labor Occupational Safety and Health Administration OSHA 2209 1996

Screening and surveillance. OSHA's medical surveillance provisions.

PubMed

Papp, E M; Miller, A S

2000-02-01

The OSH Act requires OSHA to include provisions for medical examinations of employees in its standards. However, the specific test and examinations criteria are not outlined in the OSH Act. Instead, each standard has specific medical surveillance requirements. These are specific to the adverse health effects triggered by exposure to the hazardous substance. The OSHA uses the term medical surveillance to refer to its employee examination and testing provisions. Most occupational health professionals call this activity employee screening and reserve the term surveillance for aggregate analysis of population data. It is important to remember this distinction when referring to OSHA standards. Many standards are challenged in court resulting in changes to medical surveillance provisions of the standards. Some court decisions support OSHA's language. In either case, the court often sets precedents for future standards.

Med-Tech Program. Tech Prep Final Report.

ERIC Educational Resources Information Center

Chicago Public Schools, IL.

Staff from DuSable High School in Chicago, Illinois, collaborated with Malcolm X College and three area hospitals to develop a medical technician training program focusing on career awareness and development of the basic reading and math skills needed for any career. A 3-year Med Tech curriculum for grades 9, 10, and 11 and a career awareness…

OSHA sets final ergonomics rule.

PubMed

Tabone, S

2001-02-01

After years of advocating for an ergonomic regulation through the Occupational Safety and Health Administration (OSHA), at last on November 14, 2000, the final standards were issued. The OSHA Ergonomic Standards are designed to prevent musculoskeletal injury by matching workplace conditions to job demands. This rule will provide long awaited relief to nurses in direct care who have worked for years without benefit, in most cases, of technology that could have prevented ergonomic injury.

Impact of preparing for OSHA local emphasis program inspections of New York dairy farms: Case studies and financial cost analysis.

PubMed

Gadomski, Anne M; Vargha, Marybeth; Tallman, Nancy; Scribani, Melissa B; Kelsey, Timothy W

2016-03-01

OSHA inspection of dairy farms began in July 1, 2014 in New York State. As of September 2014, a total of eight farms were randomly selected for inspection. This case study addresses how dairy farm managers prepared for these inspections, and identifies farm level costs preparing for inspection and/or being inspected. Four farms that were OSHA inspected and 12 farms that were not inspected were included in this mixed method evaluation using a multimodal (telephone, email, or mail) survey. Descriptive analysis was carried out using frequencies, proportions, means, and medians. Overall, the impact of OSHA inspections was positive, leading to improved safety management and physical changes on the farm and worker trainings, although the farmers' perspectives about OSHA inspection were mixed. The cost of compliance was low relative to estimated overall production costs. Clarifications and engineering solutions for specific dairy farm hazard exposures are needed to facilitate compliance with OSHA regulations. © 2015 Wiley Periodicals, Inc.

Occupational exposure to ethylene oxide--OSHA. Final rule: supplemental statement of reasons.

PubMed

1985-01-02

On June 22, 1984, the Occupational Safety and Health Administration (OSHA) published a final standard for ethylene oxide (EtO) that established a permissible exposure limit of 1 part EtO per million parts of air determined as an 8-hour time--weighted average (TWA) concentration (29 CFR 1910.1047, 49 FR 25734). The standard also includes provisions for methods of exposure control, personal protective equipment, measurement of employee exposure, training, signs, and labels, medical surveillance, regulated areas, emergencies and recordkeeping. The basis for this action was a determination by OSHA, based on human and animal data, that exposure to EtO presents a carcinogenic, mutagenic, genotoxic, reproductive, neurologic, and sensitization hazard to workers. During the rulemaking proceedings that led to the establishment of the 1 ppm TWA, the issue of whether there was a need for a short-term exposure limit (STEL) for workers protection from EtO was raised. OSHA reserved decision on the adoption of a STEL at the conclusion of the rulemaking in order to permit peer review of the available evidence and to review more fully the arguments and pertinent data regarding the STEL issue. Upon receipt of the analyses from most of the peer reviewers, OSHA published a notice to that effect on September 19, 1984 (49 FR 36659) and invited public comment on the pertinent issues addressed in the peer reviews. Based on the entire rulemaking record, including the peer reviews and public comments received since June 22, the Assistant Secretary has determined that adoption of a STEL for EtO is not warranted by the available health evidence, and that a STEL is not reasonably necessary or appropriate for inclusion in the final EtO standard. OSHA has also asked that NIOSH fund certain additional studies related to whether a dose-rate relationship can be established for EtO, and OSHA will review the results of those studies when they become available.

75 FR 24505 - Modernization of OSHA's Injury and Illness Data Collection Process

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-05

... data collected by an improved and modernized OSHA recordkeeping system and made public under the Open.... OSHA-2010-0024] Modernization of OSHA's Injury and Illness Data Collection Process AGENCY: Occupational... modernization of OSHA's injury and illness data collection system. OSHA encourages stakeholders who cannot...

OSHA Confronts Carcinogens in the Workplace as Inflation Fighters Confront OSHA.

ERIC Educational Resources Information Center

Heller, Ilene

1978-01-01

Discusses the apparently opposing forces of worker safety, as represented by the Occupational Safety and Health Administration (OSHA), and economic inflation spawned by expensive industrial processes needed to limit the emission of carcinogens. (CP)

Pharmacist and Technician Perceptions of Tech-Check-Tech in Community Pharmacy Practice Settings.

PubMed

Frost, Timothy P; Adams, Alex J

2018-04-01

Tech-check-tech (TCT) is a practice model in which pharmacy technicians with advanced training can perform final verification of prescriptions that have been previously reviewed for appropriateness by a pharmacist. Few states have adopted TCT in part because of the common view that this model is controversial among members of the profession. This article aims to summarize the existing research on pharmacist and technician perceptions of community pharmacy-based TCT. A literature review was conducted using MEDLINE (January 1990 to August 2016) and Google Scholar (January 1990 to August 2016) using the terms "tech* and check," "tech-check-tech," "checking technician," and "accuracy checking tech*." Of the 7 studies identified we found general agreement among both pharmacists and technicians that TCT in community pharmacy settings can be safely performed. This agreement persisted in studies of theoretical TCT models and in studies assessing participants in actual community-based TCT models. Pharmacists who had previously worked with a checking technician were generally more favorable toward TCT. Both pharmacists and technicians in community pharmacy settings generally perceived TCT to be safe, in both theoretical surveys and in surveys following actual TCT demonstration projects. These perceptions of safety align well with the actual outcomes achieved from community pharmacy TCT studies.

Occupational Safety & Health. Inspectors' Opinions on Improving OSHA Effectiveness. Fact Sheet for Subcommittee on Health and Safety, Committee on Education and Labor, House of Representatives.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Div. of Human Resources.

Questionnaires gathered opinions of all Occupational Safety and Health Administration (OSHA) field supervisors and a randomly selected sample of one-third of the compliance officers about OSHA's approach to improving workplace safety and health. Major topics addressed were enforcement, safety and health standards, education and training, employer…

Planning a Tech Prep Program in Hospitality. Final Report.

ERIC Educational Resources Information Center

Chicago City Colleges, IL. Chicago City-Wide Coll.

A project conducted to establish tech prep articulation training agreements between City Colleges of Chicago and several public secondary schools is described in this report. Project activities were as follows: (1) developed a handbook to define the tech prep experience and guide committee members on how tech prep can be a valuable asset to…

What To Do When OSHA Comes Calling.

ERIC Educational Resources Information Center

Barber, Charles K.

This booklet explains the actions that college or university administrators should take if their institution is subject to an inspection by the Occupational Safety and Health Administration (OSHA) for possible health or safety violations. After providing a fictional case study and an explanation of the OSHA inspection process, the booklet reviews…

77 FR 42988 - Updating OSHA Construction Standards Based on National Consensus Standards; Head Protection...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

.... OSHA-2011-0184] RIN 1218-AC65 Updating OSHA Construction Standards Based on National Consensus... Administration (OSHA), Department of Labor. ACTION: Direct final rule; correction. SUMMARY: OSHA is correcting a... confusion resulting from a drafting error. OSHA published the DFR on June 22, 2012 (77 FR 37587). OSHA also...

29 CFR 42.10 - Farm labor contact persons and regional coordinators (OSHA).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 1 2011-07-01 2011-07-01 false Farm labor contact persons and regional coordinators (OSHA... contact persons and regional coordinators (OSHA). (a) OSHA Area Directors shall be responsible for... taken; and (2) migrant farmworker camp inspections are scheduled promptly. (b) OSHA Area Directors shall...

29 CFR 42.10 - Farm labor contact persons and regional coordinators (OSHA).

Code of Federal Regulations, 2010 CFR

2010-07-01

... contact persons and regional coordinators (OSHA). (a) OSHA Area Directors shall be responsible for... Contact Persons shall be designated in OSHA area offices with responsibility for conducting a significant... 29 Labor 1 2010-07-01 2010-07-01 true Farm labor contact persons and regional coordinators (OSHA...

Protecting workers from pathogens. Employers must act now to comply with OSHA's new standard on bloodborne pathogens.

PubMed

White, C L

1992-04-01

A new standard set forth by the Occupational Safety and Health Administration (OSHA) requires healthcare employers to implement sweeping new controls in areas such as record keeping, engineering, hazard prevention, and work practice. Through the bloodborne pathogen standard, which went into effect on March 6, OSHA acknowledges that healthcare workers face significant health risks as a result of occupational exposure to blood and other infectious materials. Although most prudent healthcare providers already adhere to the Centers for Disease Control's universal precautions, the OSHA regulations include several additional mandatory measures that are more specific and stringent. The additional measures include the development of an exposure control plan, procedures for responding to an employee's exposure to bloodborne pathogens, the implementation of certain engineering and work practice controls to eliminate or minimize on-the-job exposure risks, and the provision of personal protective equipment and information and training programs. OSHA estimates that the greatest cost component of implementing procedures to bring a facility into compliance is attributable to the purchase of personal protective equipment. Although the costs of compliance are substantial, OSHA has estimated that these costs represent less than 1 percent of the healthcare industry's annual revenues. Violation of the bloodborne pathogen standard may result in penalties of up to $70,000, depending on the severity of the infraction. Criminal penalties are also possible for willful violations that result in worker death.

Use of OSHA inspections data for fatal occupational injury surveillance in New Jersey.

PubMed

Stanbury, M; Goldoft, M

1990-02-01

Occupational Safety and Health Administration (OSHA) computerized inspections data, death certificates, and medical examiner records identified 204 fatal occupational injuries in New Jersey, 1984-85. OSHA computerized data uniquely identified seven cases. They did not identify 35 fatalities under OSHA's jurisdiction, of which 24 were investigated by OSHA but not recorded, four were not considered work-related, and seven were not known to OSHA. Eighty-seven were outside OSHA's jurisdiction; 28 were among the self-employed who are not under the health and safety protection of any governmental agency.

Use of OSHA inspections data for fatal occupational injury surveillance in New Jersey.

PubMed Central

Stanbury, M; Goldoft, M

1990-01-01

Occupational Safety and Health Administration (OSHA) computerized inspections data, death certificates, and medical examiner records identified 204 fatal occupational injuries in New Jersey, 1984-85. OSHA computerized data uniquely identified seven cases. They did not identify 35 fatalities under OSHA's jurisdiction, of which 24 were investigated by OSHA but not recorded, four were not considered work-related, and seven were not known to OSHA. Eighty-seven were outside OSHA's jurisdiction; 28 were among the self-employed who are not under the health and safety protection of any governmental agency. PMID:2297066

Tuberculosis in the workplace: OSHA's compliance experience.

PubMed

McDiarmid, M; Gamponia, M J; Ryan, M A; Hirshon, J M; Gillen, N A; Cox, M

1996-03-01

Inspections of 272 facilities were performed between May 1992 and October 1994 to determine compliance with applicable Occupational Safety and Health Administration (OSHA) requirements for prevention of tuberculosis (TB) transmission. Retrospective record review of two data sources: (1) OSHA's Computerized Integrated Management Information System and (2) an inspector-completed questionnaire on inspection results. Inspections of five types of facilities: healthcare institutions, correctional facilities, homeless shelters, long-term-care facilities for the elderly, and others, including drug treatment centers that the Centers for Disease Control and Prevention (CDC) identified as having a higher than expected rate of TB. The OSHA Compliance Memorandum, based on the 1990 CDC Guidelines, which outlined elements of a TB prevention program, was used in performing 272 inspections of facilities between May 1992 and October 1994. Elements of compliance were recorded and reviewed from the IMIS database and inspectors' questionnaires. Regulated facilities were not fully compliant with OSHA guidance. Generally, healthcare facilities performed better than other facilities. Most facilities (79%) were compliant with administrative elements of a comprehensive TB control program, such as early identification of known or suspected infectious TB patients and skin testing of workers. Only 29% of inspected facilities were found to have acceptable respiratory protection programs for the prevention of occupational TB. Facilities have not been fully compliant with the OSHA memorandum describing protection of workers from TB. Facility compliance was better with some traditionally recognized TB infection control elements, but was weaker in the area of respiratory protection programs. This may reflect a lack of familiarity with the latter type of hazard protection.

Academic Experiences with OSHA

ERIC Educational Resources Information Center

Schmidt, Raymond L.

1977-01-01

Reports the results of a survey of college and university chemistry departments that identifies the level of inspections that have occurred due to new standards set by the Occupational Safety and Health Act (OSHA). (MLH)

OSHA Standard Time: Worker Safety Rules for Schools.

ERIC Educational Resources Information Center

Smith, Sharon E.; Roy, Kenneth R.

1994-01-01

Briefly describes six of the Occupational Safety and Health Administration (OSHA) standards applicable to school districts. Provides a suggested approach for compliance and discusses how one district has begun to meet the challenge. The mandated OSHA programs concern the following: (1) hazard communication; (2) chemical hygiene; (3) bloodborne…

77 FR 68684 - Updating OSHA Standards Based on National Consensus Standards; Head Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-16

..., 1918, and 1926 [Docket No. OSHA-2011-0184] RIN 1218-AC65 Updating OSHA Standards Based on National Consensus Standards; Head Protection AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Final rule; confirmation of effective date. SUMMARY: OSHA is confirming the effective date of its...

75 FR 2890 - OSHA Listens: Occupational Safety and Health Administration Stakeholder Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-19

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0004] OSHA Listens: Occupational Safety and Health Administration Stakeholder Meeting AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice of public meeting. SUMMARY: The Occupational Safety...

77 FR 43018 - Updating OSHA Construction Standards Based on National Consensus Standards; Head Protection...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

.... OSHA-2011-0184] RIN 1218-AC65 Updating OSHA Construction Standards Based on National Consensus... Health Administration (OSHA), Department of Labor. ACTION: Notice of proposed rulemaking; correction. SUMMARY: OSHA is correcting a notice of proposed rulemaking (NPRM) with regard to the construction...

Significant Revisions to OSHA 29 CFR 1910.269.

PubMed

Neitzel, Dennis K

2015-06-01

The updated OSHA 29 CFR 1910.269 requirements are significant for assisting employers in their efforts to protect their employees from electrical hazards. In addition, OSHA based these revisions on the latest consensus standards and improvements in electrical safety technology. Together, the updated regulation creates a unified and up-to-date set of requirements to help employers more effectively establish safe work practices to protect their workers.

78 FR 66642 - Updating OSHA Standards Based on National Consensus Standards; Signage

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-06

... single standard is best. The ANSI Z535 designs, the traditional safety sign and tag designs, as well as... [Docket No. OSHA-2013-0005] RIN 1218-AC77 Updating OSHA Standards Based on National Consensus Standards... rule; confirmation of effective date. SUMMARY: On June 13, 2013, OSHA published in the Federal Register...

OSHA, A Moral Responsibility

ERIC Educational Resources Information Center

McPherson, William H.

1977-01-01

Discusses the goal of the Occupational Safety and Health Administration (OSHA) and the role of industrial arts teachers in helping students understand the importance of safety in industry. Four instructional approaches which industrial arts teachers may use to develop positive student attitudes toward safety are also described. (SH)

A Recipe for Success OSHA VPP and Wellness

NASA Technical Reports Server (NTRS)

Keprta, Sean

2010-01-01

This slide presentation reviews the Voluntary Protection Program (VPP) which is a program to promote effective worksite-based safety and health. In the VPP, management, labor, and OSHA establish cooperative relationships at workplaces that have implemented a comprehensive safety and health management system. The history of JSC's Total Health program and the movement from the Safety and Total Health program and the efforts to become certified by OSHA is reviewed.

The OSHA hazardous chemical occupational exposure standard for laboratories.

PubMed

Armbruster, D A

1991-01-01

OSHA's chemical occupational exposure standard for laboratories is an outgrowth of the previously issued Hazard Communication Standard. The standard relieves laboratories from complying with general industry standards but does require compliance with specific laboratory guidelines. The heart of the standard is the creation of a Chemical Hygiene Plan (CHP). The CHP addresses major issues such as safety equipment and procedures, work practices, training, the designation of a chemical hygiene officer, and the provision of medical consultation and examination for affected employees. This new standard, in full effect as of January 31, 1991, presents yet another regulatory challenge to laboratory managers but also ensures a safer environment for laboratory workers.

A Comparison of the OSHA Modified NIOSH Physical and Chemical Analytical Method (P and CAM) 304 and the Dust Trak Photometric Aerosol Sampler for 0-Chlorobenzylidine Malonitrile

DTIC Science & Technology

2013-04-02

photometric particle counting instrument, DustTrak, to the established OSHA modified NIOSH P&CAM 304 method to determine correlation between the two...study compared the non-specific, rapid photometric particle counting instrument, DustTrak, to the established OSHA modified NIOSH P&CAM 304 method...mask confidence training (27) . This study will compare a direct reading, non-specific photometric particle count instrument (DustTrak TSI Model

Concrete pavement construction basics : tech notes.

DOT National Transportation Integrated Search

2006-08-01

This tech note has been produced for developers, consultants, and engineers planning concrete pavement construction projects, superintendents and supervisors who want a basic training aid and reference, and crew members new to the concrete paving ind...

77 FR 68717 - Updating OSHA Standards Based on National Consensus Standards; Head Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-16

..., 1918, and 1926 [Docket No. OSH-2011-0184] RIN 1218-AC65 Updating OSHA Standards Based on National Consensus Standards; Head Protection AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Proposed rule; withdrawal. SUMMARY: With this notice, OSHA is withdrawing the proposed rule that...

Industry Raps OSHA's Proposed Cancer Policy

ERIC Educational Resources Information Center

Chemical and Engineering News, 1978

1978-01-01

Presents the response of the American Industrial Health Council (AIHC) to the Occupational Safety and Health Administration's (OSHA's) genetic proposal for regulating chemical carcinogens in industry. (HM)

Updating OSHA standards based on national consensus standards. Direct final rule.

PubMed

2007-12-14

In this direct final rule, the Agency is removing several references to consensus standards that have requirements that duplicate, or are comparable to, other OSHA rules; this action includes correcting a paragraph citation in one of these OSHA rules. The Agency also is removing a reference to American Welding Society standard A3.0-1969 ("Terms and Definitions") in its general-industry welding standards. This rulemaking is a continuation of OSHA's ongoing effort to update references to consensus and industry standards used throughout its rules.

29 CFR 1912.32 - Presence of OSHA officer or employee.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Presence of OSHA officer or employee. 1912.32 Section 1912.32 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Presence of OSHA officer or employee. The meetings of all advisory committees shall be in the presence of...

29 CFR 1912.32 - Presence of OSHA officer or employee.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Presence of OSHA officer or employee. 1912.32 Section 1912.32 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Presence of OSHA officer or employee. The meetings of all advisory committees shall be in the presence of...

Surviving your first OSHA inspection.

PubMed

Coughlin, L; Jukkala, P

1994-05-01

With the inception of the bloodborne pathogens standard, home care agencies are more likely to undergo an inspection by the Occupational Safety and Health Administration. What should employers know, and how can they always be prepared for the startling announcement of an OSHA inspection?

Results of an OSHA ergonomic intervention program in New Hampshire.

PubMed

May, David C

2002-11-01

A number of articles have been written about the value of OSHA inspections, and to a lesser extent, OSHA targeting. However, there have been few, if any, that quantify the effectiveness of an injury specific targeting program. This study examines the change in the incidence of carpal tunnel syndrome (CTS) in a group of employers following the implementation of an OSHA Local Emphasis Program (LEP) for ergonomics by an area office of the Occupational Safety and Health Administration (OSHA). The OSHA program consisted of inspections initiated between 1992 and 1995 in New Hampshire at work sites with a history of CTS and tendinitis workers' compensation claims. Workers' compensation data for 14 employers were examined and the annual incidence for that group were compared with the experience of all other New Hampshire employers. New Hampshire employers who had one or more of their work sites experienced a decline in carpal tunnel syndrome greater than in other New Hampshire employers. The annual incidence of CTS of inspected employers fell from 38/10,000 in 1992 to 3.8/10,000 in 1997. New Hampshire employers not receiving an inspection focused on upper extremity cumulative trauma hazards fell from 6.6/10,000 to 3.4/10,000 during that same period. The LEP group of employers was responsible for 17 percent of all workers' compensation CTS cases in New Hampshire in 1992. By 1997 their contribution had dropped to less than 5 percent.

Views of a Cal/OSHA Inspector.

PubMed

Oudiz, Jack

2009-01-01

Retiring CAL/OSHA Industrial Hygienist and Senior Safety Engineer Jack Oudiz offers his thoughts in the nature of a voluntary "exit interview" on his years working for the agency and its performance in its mission.

SLJ's Tech Survey Part Two

ERIC Educational Resources Information Center

Brewer, Sally; Milam, Peggy

2005-01-01

Library media specialists are gung ho on technology, but they often lack the cash to take advantage of it, according to "SLJ"'s first-ever tech survey. Earlier this year, they reported on the various ways that school librarians use technology--from creating Web sites to policy-making to training students and colleagues. This time, they…

Industrial responses to constrained OSHA regulation. Occupational Safety and Health Administration.

PubMed

Pedersen, D H

2000-01-01

As part of the effort to reduce the size and economic impact of the federal establishment, congressional conservatives are proposing legislation to restrict the regulatory activity of the Occupational Safety and Health Administration (OSHA). These proposals push OSHA toward a purely consultative role, at a corresponding cost in direct regulatory capability. The Clinton administration's reinvention of government initiative is also moving OSHA toward a consultative role based on a strategy of cooperative compliance or industry self-regulation with a strong coercive foundation. Since both camps appear to agree that self-regulation can assure a safe and healthy workplace, the remaining debate concerns the extent to which coercive regulation is still needed. National survey data on the industrial provision of occupational safety and health services in the manufacturing sector were used to measure changes in industrial safety and health activity between 1972-74 and 1981-83. In conjunction with data on OSHA command-and-control regulatory activity from 1972 to 1979, these data permitted an examination of the relationship between command-and-control regulatory activities and changes in industrial behavior that could be regarded as a form of self-regulation. This analysis showed that coercive regulation by OSHA in the 1970s was significantly related to industry self-regulation efforts, although the relationship varied by industrial facility employment size and type of regulatory coercion. These results indicate that coercive regulation should be retained as an industrial incentive in any self-regulation policy paradigm. The results also provide evidence that OSHA regulatory policy should be based on anticipated differences in industrial response to various coercive measures.

OSHA: Implications for Higher Education.

ERIC Educational Resources Information Center

National Association of College and University Business Officers, Washington, DC.

Presented in this document are several articles concerning recommendations about the Occupational Safety and Health Act of 1970 (OSHA) and its implications for higher education. It is time for an educated look at facilities and programs and the beginning of plans which, in the long run, will bring colleges and universities into compliance with…

78 FR 35585 - Updating OSHA Standards Based on National Consensus Standards; Signage

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-13

...; Signage AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION: Notice... Administration (``OSHA'' or ``the Agency'') proposes to update its general industry and construction signage... standards, ANSI Z53.1-1967, Z35.1-1968, and Z35.2-1968, in its signage standards, thereby providing...

A "Fine" Relationship: OSHA and Schools.

ERIC Educational Resources Information Center

O'Neill, Steve

2001-01-01

To avoid California schools' experience with Occupational Safety and Health Administration fines, principals should comply with safety regulations, establish quick-response procedures, take care of chemicals, prepare site personnel for state OSHA visits, inform safety personnel about procedures for appealing citations, keep good records, and work…

42 CFR 73.15 - Training.

Code of Federal Regulations, 2010 CFR

2010-10-01

... provide information and training on biosafety and security to each individual with access approval from... entity must provide information and training on biosafety and security to each individual not approved... provided under the OSHA Bloodborne Pathogen Standard set forth at 29 CFR 1910.1030. (b) Refresher training...

TurboTech Technical Evaluation Automated System

NASA Technical Reports Server (NTRS)

Tiffany, Dorothy J.

2009-01-01

TurboTech software is a Web-based process that simplifies and semiautomates technical evaluation of NASA proposals for Contracting Officer's Technical Representatives (COTRs). At the time of this reporting, there have been no set standards or systems for training new COTRs in technical evaluations. This new process provides boilerplate text in response to interview style questions. This text is collected into a Microsoft Word document that can then be further edited to conform to specific cases. By providing technical language and a structured format, TurboTech allows the COTRs to concentrate more on the actual evaluation, and less on deciding what language would be most appropriate. Since the actual word choice is one of the more time-consuming parts of a COTRs job, this process should allow for an increase in quantity of proposals evaluated. TurboTech is applicable to composing technical evaluations of contractor proposals, task and delivery orders, change order modifications, requests for proposals, new work modifications, task assignments, as well as any changes to existing contracts.

Updating OSHA standards based on national consensus standards. final rule; confirmation of effective date.

PubMed

2008-03-14

OSHA is confirming the effective date of its direct final rule that revises a number of standards for general industry that refer to national consensus standards. The direct final rule states that it would become effective on March 13, 2008 unless OSHA receives significant adverse comment on these revisions by January 14, 2008. OSHA received no adverse comments by that date and, therefore, is confirming that the rule will become effective on March 13, 2008.

All About OSHA and How It Will Help -- and Unnerve -- Your District

ERIC Educational Resources Information Center

American School Board Journal, 1973

1973-01-01

In response to OSHA, school board members and administrators should initiate a comprehensive, districtwide safety education and accident prevention program. OSHA will affect schools by requiring injury and illness records and onsite inspections. It will affect the operation of the physical plant and effect the provision of a comprehensive,…

Ask Dr. Sue--OSHA Requires Employers to Give Hepatitis B Immunization and Protection to First Aiders.

ERIC Educational Resources Information Center

Aronson, Susan S.

1992-01-01

Explains rules of the Occupational Safety and Health Administration (OSHA) that require employers to protect employees whose jobs may result in worker contact with potentially infectious materials. Describes conditions that apply to violations of OSHA rules. Urges child care programs to formulate plans for compliance with OSHA requirements. (SM)

Project Synopsis for High School/High Tech

NASA Technical Reports Server (NTRS)

1997-01-01

To help increase the diversity of workers at NASA centers it is necessary to provide students with disabilities the opportunities to explore careers in high technology. HIGH SCHOOL/HIGH TECH, an enrichment program, pioneered at Goddard Space Flight Center, successfully introduces students with disabilities to high tech careers. This community-based partnership serves as a model for three additional NASA sites-Ames Research Center, Johnson Space Flight Center, and Lewis Research Center. For a three year period beginning August 15, 1995, provide financial and technical support to a local agency in each NASA center area which serves persons with disabilities to enable a High School/High Tech program to develop and stand alone. Each project will develop a basis of cooperation with Ames, Johnson, and Lewis as well as a variety of community groups including the public schools, high tech employers, post-secondary education and training programs, rehabilitation agencies, and community economic development organizations. Throughout the startup period and thereafter, local youths with disabilities will have early exposure to professions in mathematics, science, and technology-related fields. This exposure will be multifaceted to insure adequate opportunity for realistic career exploration so these youths have an opportunity to test their interests and abilities. The exposure will be presented in the most supportive environment that is feasible.

OSHA Laboratory Standard: Driving Force for Laboratory Safety!

ERIC Educational Resources Information Center

Roy, Kenneth R.

2000-01-01

Discusses the Occupational Safety and Health Administration's (OSHA's) Laboratory Safety Standards as the major driving force in establishing and maintaining a safe working environment for teachers and students. (Author)

Updating OSHA Standards Based on National Consensus Standards; Eye and Face Protection. Final rule.

PubMed

2016-03-25

On March 13, 2015, OSHA published in the Federal Register a notice of proposed rulemaking (NPRM) to revise its eye and face protection standards for general industry, shipyard employment, marine terminals, longshoring, and construction by updating the references to national consensus standards approved by the American National Standards Institute (ANSI). OSHA received no significant objections from commenters and therefore is adopting the amendments as proposed. This final rule updates the references in OSHA's eye and face standards to reflect the most recent edition of the ANSI/International Safety Equipment Association (ISEA) eye and face protection standard. It removes the oldest-referenced edition of the same ANSI standard. It also amends other provisions of the construction eye and face protection standard to bring them into alignment with OSHA's general industry and maritime standards.

An analysis of violations of Osha's (1987) occupational exposure to benzene standard.

PubMed

Williams, Pamela R D

2014-01-01

The Occupational Safety and Health Administration (OSHA), which was formed by the Occupational Safety and Health Act of 1970 (OSH Act), establishes enforceable health and safety standards in the workplace and issues violations and penalties for non-compliance with these standards. The purpose of the current study was to evaluate the number and type of violations of the OSHA (1987) Occupational Exposure to Benzene Standard. Violations of the OSHA Hazard Communication Standard (HCS), particularly those that may pertain to specific provisions of the benzene standard, were also assessed. All analyses were based on OSHA inspection data that have been collected since the early 1970s and that are publicly available from the U.S. Department of Labor enforcement website. Analysis of these data shows that fewer than a thousand OSHA violations of the benzene standard have been issued over the last 25+ years. The results for benzene are in contrast to those for some other toxic and hazardous substances that are regulated by OSHA, such as blood-borne pathogens, lead, and asbestos, for which there have been issued tens of thousands of OSHA violations. The number of benzene standard violations also varies by time period, standard provision, industry sector, and other factors. In particular, the greatest number of benzene standard violations occurred during the late 1980s to early/mid 1990s, soon after the 1987 final benzene rule was promulgated. The majority of benzene standard violations also pertain to noncompliance with specific provisions and subprovisions of the standard dealing with initial exposure monitoring requirements, the communication of hazards to employees, and medical surveillance programs. Only a small fraction of HCS violations are attributed, at least in part, to potential benzene hazards in the workplace. In addition, most benzene standard violations are associated with specific industries within the manufacturing sector where benzene or benzene

76 FR 17451 - Online OSHA Outreach Training Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-29

... must submit an application in order to be considered to offer online Outreach Training Program courses... minimum of 3 years training experience; (b) They each are in good standing (not on probation, suspended... Outreach Training Program course would be offered online, and any relevant language or target audience...

OSHA Final Rule Gives Employees the Right to See Their Exposure and Medical Records.

ERIC Educational Resources Information Center

Hayes, Mary

1982-01-01

Provides details pertaining to the Occupational Safety and Health Administration (OSHA) ruling that gives employees, their designated representatives, and OSHA the right to examine their on-the-job medical records. Discusses the effects the ruling may have on organizations. (Author/MLF)

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

OSHA TB standard adds teeth to CDC guidelines. Occupational Safety and Health Administration. Centers for Disease Control and Prevention.

PubMed

1997-12-01

The Occupational Safety and Health Administration (OSHA) has published a proposed standard to provide health care workers with more protection against tuberculosis (TB). With one-quarter of new TB cases occurring in HIV-infected people, 5.3 million workers treating AIDS patients and working with at-risk populations need to be aware of the proposed guidelines. OSHA estimates that the new standard could eliminate most work-related TB infections and save up to $116 million in medical costs and lost production. The OSHA standards vary from those of the Centers for Disease Control (CDC) in several ways. CDC guidelines are voluntary, whereas OSHA standards are enforceable and facilities can be fined for violations. Although OSHA standards have incorporated basic elements of the CDC recommendations, OSHA standards also would require employers to conduct exposure assessments, require six-month skin testing, and call for respirator use in more instances. OSHA officials expect broad participation at public hearings on the new standard, scheduled to begin in February 1998.

Three Years of OSHA: The View from Within

ERIC Educational Resources Information Center

Reis, Alexander J.

1975-01-01

The first three years of the Occupational Safety and Health Administration (OSHA) have been developmental years. Significant advances have been made toward on objective--assuring safe and healthful workplaces for all Americans. (Author/MW)

75 FR 64216 - Interpretation of OSHA's Provisions for Feasible Administrative or Engineering Controls of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-19

... CFR Parts 1910 and 1926 Interpretation of OSHA's Provisions for Feasible Administrative or Engineering... feasible administrative or engineering controls as used in the applicable sections of OSHA's General... administrative or engineering controls rather than personal protective equipment (PPE) to reduce noise exposures...

OSHA Training Institute Catalog of Courses.

ERIC Educational Resources Information Center

May, Fredric C., Comp.

The Occupational Safety and Health Administration Training Institute's series of courses for 1978 is presented in this catalog. Most courses are designed for occupational safety or health professionals who are federal or state employees; two are available for personnel from the private sector. The schedule includes courses required for newly hired…

29 CFR 1904.9 - Recording criteria for cases involving medical removal under OSHA standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... under OSHA standards. 1904.9 Section 1904.9 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR RECORDING AND REPORTING OCCUPATIONAL INJURIES AND... removal under OSHA standards. (a) Basic requirement. If an employee is medically removed under the medical...

29 CFR 1904.9 - Recording criteria for cases involving medical removal under OSHA standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... under OSHA standards. 1904.9 Section 1904.9 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR RECORDING AND REPORTING OCCUPATIONAL INJURIES AND... removal under OSHA standards. (a) Basic requirement. If an employee is medically removed under the medical...

Under-recording of work-related injuries and illnesses: An OSHA priority.

PubMed

Fagan, Kathleen M; Hodgson, Michael J

2017-02-01

A 2009 Government Accounting Office (GAO) report, along with numerous published studies, documented that many workplace injuries are not recorded on employers' recordkeeping logs required by the Occupational Safety and Health Administration (OSHA) and consequently are under-reported to the Bureau of Labor Statistics (BLS), resulting in a substantial undercount of occupational injuries in the United States. OSHA conducted a Recordkeeping National Emphasis Program (NEP) from 2009 to 2012 to identify the extent and causes of unrecorded and incorrectly recorded occupational injuries and illnesses. OSHA found recordkeeping violations in close to half of all facilities inspected. Employee interviews identified workers' fear of reprisal and employer disciplinary programs as the most important causes of under-reporting. Subsequent inspections in the poultry industry identified employer medical management policies that fostered both under-reporting and under-recording of workplace injuries and illnesses. OSHA corroborated previous research findings and identified onsite medical units as a potential new cause of both under-reporting and under-recording. Research is needed to better characterize and eliminate obstacles to the compilation of accurate occupational injury and illness data. Occupational health professionals who work with high hazard industries where low injury rates are being recorded may wish to scrutinize recordkeeping practices carefully. This work suggests that, although many high-risk establishments manage recordkeeping with integrity, the lower the reported injury rate, the greater the likelihood of under-recording and under-reporting of work-related injuries and illnesses. Published by Elsevier Ltd.

General RMP Guidance - Appendix D: OSHA Guidance on PSM

EPA Pesticide Factsheets

OSHA's Process Safety Management (PSM) Guidance on providing complete and accurate written information concerning process chemicals, process technology, and process equipment; including process hazard analysis and material safety data sheets.

Evaluating OSHA's ethylene oxide standard: exposure determinants in Massachusetts hospitals.

PubMed Central

LaMontagne, A D; Kelsey, K T

2001-01-01

OBJECTIVES: This study sought to identify determinants of workplace exposures to ethylene oxide to assess the effect of the Occupational Safety and Health Administration's (OSHA's) 1984 ethylene oxide standard. METHODS: An in-depth survey of all hospitals in Massachusetts that used ethylene oxide from 1990 through 1992 (96% participation, N = 90) was conducted. Three types of exposure events were modeled with logistic regression: exceeding the 8-hour action level, exceeding the 15-minute excursion limit, and worker exposures during unmeasured accidental releases. Covariates were drawn from data representing an ecologic framework including direct and indirect potential exposure determinants. RESULTS: After adjustment for frequencies of ethylene oxide use and exposure monitoring, a significant inverse relation was observed between exceeding the action level and the use of combined sterilizer-aerators, an engineering control technology developed after the passage of the OSHA standard. Conversely, the use of positive-pressure sterilizers that employ ethylene oxide gas mixtures was strongly related to both exceeding the excursion limit and the occurrence of accidental releases. CONCLUSIONS: These findings provide evidence of a positive effect of OSHA's ethylene oxide standard and specific targets for future prevention and control efforts. PMID:11236406

Evaluating OSHA's ethylene oxide standard: exposure determinants in Massachusetts hospitals.

PubMed

LaMontagne, A D; Kelsey, K T

2001-03-01

This study sought to identify determinants of workplace exposures to ethylene oxide to assess the effect of the Occupational Safety and Health Administration's (OSHA's) 1984 ethylene oxide standard. An in-depth survey of all hospitals in Massachusetts that used ethylene oxide from 1990 through 1992 (96% participation, N = 90) was conducted. Three types of exposure events were modeled with logistic regression: exceeding the 8-hour action level, exceeding the 15-minute excursion limit, and worker exposures during unmeasured accidental releases. Covariates were drawn from data representing an ecologic framework including direct and indirect potential exposure determinants. After adjustment for frequencies of ethylene oxide use and exposure monitoring, a significant inverse relation was observed between exceeding the action level and the use of combined sterilizer-aerators, an engineering control technology developed after the passage of the OSHA standard. Conversely, the use of positive-pressure sterilizers that employ ethylene oxide gas mixtures was strongly related to both exceeding the excursion limit and the occurrence of accidental releases. These findings provide evidence of a positive effect of OSHA's ethylene oxide standard and specific targets for future prevention and control efforts.

Tech House

NASA Technical Reports Server (NTRS)

1978-01-01

The members of the Swain family- Dr. Charles "Bill" Swain, wife Elaine, daughter Carol, 17, son "Chuck", 12, and dog Susie have an interesting assignment. They are active participants in an important NASA research program involving the application of space-age technology to home construction. b' Transplanted Floridians, the Swains now reside in NASA's Tech House, loatedat Langley Research Center, Hampton, Virginia. Their job is to use and help evaluate the variety of advanced technology systems in Tech House. A contemporary three-bedroom home, Tech House incorporates NASA technology, the latest commercial building techniques and other innovations, all designed to reduce energy and water consumption and to provide new levels of comfort, convenience, security and fire safety. Tech House equipment performed well in initial tests, but a house is not a home until it has people. That's where the Swains come in. NASA wants to see how the various systems work under actual living conditions, to confirm the effectiveness of the innovations or to determine necessary modifications for improvement. The Swains are occupying the house for a year, during which NASA engineers are computer monitoring the equipment and assembling a record of day-to-day performance. . Tech House is a laboratory rather than a mass production prototype, but its many benefits may influence home design and construction. In a period of sharply rising utility costs, widespread adoption of Tech House features could provide large-scale savings to homeowners and potentially enormous national benefit in resources conservation. Most innovations are aerospace spinoffs: Some of the equipment is now commercially available; other systems are expected to be in production within a few years. Around 1980, a Tech House-type of home could be built for $45-50,000 (1 976 dollars). It is estimated that the homeowner would save well over $20,000 (again 1976 dollars) in utility costs over the average mortgage span of 20 years.

Occupational exposure to tuberculosis--OSHA. Proposed rule and notice of public hearing.

PubMed

1997-10-17

on a review of the data, OSHA has preliminarily concluded that workers in hospitals, nursing homes, hospices, correctional facilities, homeless shelters, and certain other work settings are at significant risk of incurring TB infection while caring for their patients and clients or performing certain procedures. To reduce this occupational risk, OSHA is proposing a standard that would require employers to protect TB-exposed employees by means of infection prevention and control measures that have been demonstrated to be highly effective in reducing or eliminating job-related TB infections. These measures include the use of respirators when performing certain high hazard procedures on infectious individuals, procedures for the early identification and treatment of TB infection, isolation of individuals with infectious TB in rooms designed to protect those in the vicinity of the room from contact with the microorganisms causing TB, and medical follow-up for occupationally exposed workers who become infected. OSHA has preliminarily determined that the engineering, work practice, and administrative controls, respiratory protection, training, medical surveillance, and other provisions of the proposed standard are technologically and economically feasible for facilities in all affected industries.

Age correction in monitoring audiometry: method to update OSHA age-correction tables to include older workers

PubMed Central

Dobie, Robert A; Wojcik, Nancy C

2015-01-01

Objectives The US Occupational Safety and Health Administration (OSHA) Noise Standard provides the option for employers to apply age corrections to employee audiograms to consider the contribution of ageing when determining whether a standard threshold shift has occurred. Current OSHA age-correction tables are based on 40-year-old data, with small samples and an upper age limit of 60 years. By comparison, recent data (1999–2006) show that hearing thresholds in the US population have improved. Because hearing thresholds have improved, and because older people are increasingly represented in noisy occupations, the OSHA tables no longer represent the current US workforce. This paper presents 2 options for updating the age-correction tables and extending values to age 75 years using recent population-based hearing survey data from the US National Health and Nutrition Examination Survey (NHANES). Both options provide scientifically derived age-correction values that can be easily adopted by OSHA to expand their regulatory guidance to include older workers. Methods Regression analysis was used to derive new age-correction values using audiometric data from the 1999–2006 US NHANES. Using the NHANES median, better-ear thresholds fit to simple polynomial equations, new age-correction values were generated for both men and women for ages 20–75 years. Results The new age-correction values are presented as 2 options. The preferred option is to replace the current OSHA tables with the values derived from the NHANES median better-ear thresholds for ages 20–75 years. The alternative option is to retain the current OSHA age-correction values up to age 60 years and use the NHANES-based values for ages 61–75 years. Conclusions Recent NHANES data offer a simple solution to the need for updated, population-based, age-correction tables for OSHA. The options presented here provide scientifically valid and relevant age-correction values which can be easily adopted by

"Tech-check-tech": a review of the evidence on its safety and benefits.

PubMed

Adams, Alex J; Martin, Steven J; Stolpe, Samuel F

2011-10-01

The published evidence on state-authorized programs permitting final verification of medication orders by pharmacy technicians, including the programs' impact on pharmacist work hours and clinical activities, is reviewed. Some form of "tech-check-tech" (TCT)--the checking of a technician's order-filling accuracy by another technician rather than a pharmacist--is authorized for use by pharmacies in at least nine states. The results of 11 studies published since 1978 indicate that technicians' accuracy in performing final dispensing checks is very comparable to pharmacists' accuracy (mean ± S.D., 99.6% ± 0.55% versus 99.3% ± 0.68%, respectively). In 6 of those studies, significant differences in accuracy or error detection rates favoring TCT were reported (p < 0.05), although published TCT studies to date have had important limitations. In states with active or pilot TCT programs, pharmacists surveyed have reported that the practice has yielded time savings (estimates range from 10 hours per month to 1 hour per day), enabling them to spend more time providing clinical services. States permitting TCT programs require technicians to complete special training before assuming TCT duties, which are generally limited to restocking automated dispensing machines and filling unit dose batches of refills in hospitals and other institutional settings. The published evidence demonstrates that pharmacy technicians can perform as accurately as pharmacists, perhaps more accurately, in the final verification of unit dose orders in institutional settings. Current TCT programs have fairly consistent elements, including the limitation of TCT to institutional settings, advanced education and training requirements for pharmacy technicians, and ongoing quality assurance.

Increased sensitivity of OSHA method analysis of diacetyl and 2,3-pentanedione in air

PubMed Central

LeBouf, Ryan; Simmons, Michael

2018-01-01

Gas chromatography/mass spectrometry (GC/MS) operated in selected ion monitoring mode was used to enhance the sensitivity of OSHA Methods 1013/1016 for measuring diacetyl and 2,3-pentanedione in air samples. The original methods use flame ionization detection which cannot achieve the required sensitivity to quantify samples at or below the NIOSH recommended exposure limits (REL: 5 ppb for diacetyl and 9.3 ppb for 2,3-pentanedione) when sampling for both diacetyl and 2,3-pentanedione. OSHA Method 1012 was developed to measure diacetyl at lower levels but requires an electron capture detector, and a sample preparation time of 36 hours. Using GC/MS allows detection of these two alpha-diketones at lower levels than OSHA Method 1012 for diacetyl and OSHA Method 1016 for 2,3-pentanedione. Acetoin and 2,3-hexanedione may also be measured using this technique. Method quantification limits were 1.1 ppb for diacetyl (22% of the REL), 1.1 ppb for 2,3-pentanedione (12% of the REL), 1.1 ppb for 2,3-hexanedione, and 2.1 ppb for acetoin. Average extraction efficiencies above the limit of quantitation were 100% for diacetyl, 92% for 2,3-pentanedione, 89% for 2,3-hexanedione, and 87% for acetoin. Mass spectrometry with OSHA Methods 1013/1016 could be used by analytical laboratories to provide more sensitive and accurate measures of exposure to diacetyl and 2,3-pentanedione. PMID:27792470

Increased sensitivity of OSHA method analysis of diacetyl and 2,3-pentanedione in air.

PubMed

LeBouf, Ryan; Simmons, Michael

2017-05-01

Gas chromatography/mass spectrometry (GC/MS) operated in selected ion monitoring mode was used to enhance the sensitivity of OSHA Methods 1013/1016 for measuring diacetyl and 2,3-pentanedione in air samples. The original methods use flame ionization detection which cannot achieve the required sensitivity to quantify samples at or below the NIOSH recommended exposure limits (REL: 5 ppb for diacetyl and 9.3 ppb for 2,3-pentanedione) when sampling for both diacetyl and 2,3-pentanedione. OSHA Method 1012 was developed to measure diacetyl at lower levels but requires an electron capture detector, and a sample preparation time of 36 hours. Using GC/MS allows detection of these two alpha-diketones at lower levels than OSHA Method 1012 for diacetyl and OSHA Method 1016 for 2,3-pentanedione. Acetoin and 2,3-hexanedione may also be measured using this technique. Method quantification limits were 1.1 ppb for diacetyl (22% of the REL), 1.1 ppb for 2,3-pentanedione (12% of the REL), 1.1 ppb for 2,3-hexanedione, and 2.1 ppb for acetoin. Average extraction efficiencies above the limit of quantitation were 100% for diacetyl, 92% for 2,3-pentanedione, 89% for 2,3-hexanedione, and 87% for acetoin. Mass spectrometry with OSHA Methods 1013/1016 could be used by analytical laboratories to provide more sensitive and accurate measures of exposure to diacetyl and 2,3-pentanedione.

29 CFR 1904.41 - Annual OSHA injury and illness survey of ten or more employers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 5 2012-07-01 2012-07-01 false Annual OSHA injury and illness survey of ten or more... HEALTH ADMINISTRATION, DEPARTMENT OF LABOR RECORDING AND REPORTING OCCUPATIONAL INJURIES AND ILLNESSES Reporting Fatality, Injury and Illness Information to the Government § 1904.41 Annual OSHA injury and...

29 CFR 1904.41 - Annual OSHA injury and illness survey of ten or more employers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 5 2013-07-01 2013-07-01 false Annual OSHA injury and illness survey of ten or more... HEALTH ADMINISTRATION, DEPARTMENT OF LABOR RECORDING AND REPORTING OCCUPATIONAL INJURIES AND ILLNESSES Reporting Fatality, Injury and Illness Information to the Government § 1904.41 Annual OSHA injury and...

29 CFR 1904.41 - Annual OSHA injury and illness survey of ten or more employers.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 5 2014-07-01 2014-07-01 false Annual OSHA injury and illness survey of ten or more... HEALTH ADMINISTRATION, DEPARTMENT OF LABOR RECORDING AND REPORTING OCCUPATIONAL INJURIES AND ILLNESSES Reporting Fatality, Injury and Illness Information to the Government § 1904.41 Annual OSHA injury and...

A joint labor-management hazard communication training program: a case study in worker health and safety training.

PubMed

Robins, T G; Hugentobler, M K; Kaminski, M; Klitzman, S

1994-01-01

The 1983 OSHA Hazard Communication Standard requires training of employees exposed to hazardous chemicals. The authors provide a detailed look at the successes and failures of a joint labor-management training program that was designed to bring a firm with more than 50 manufacturing facilities into compliance with the standard.

The Role of OSHA in Safety and Health. Module SH-02. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on the role of OSHA (Occupational Safety and Health Act) in Safety and Health is one of 50 modules concerned with job safety and health. This module looks at the OSHA Act, its aims, and the rights and responsibilities of employers and workers under the Act. Following the introduction, 16 objectives (each keyed to a page in the…

LUVOIR Tech Notes

NASA Technical Reports Server (NTRS)

Bolcar, Matthew R.; Shaklan, Stuart; Roberge, Aki; Rioux, Norman; Feinberg, Lee; Werner, Michael; Rauscher, Bernard; Mandell, Avi; France, Kevin; Schiminovich, David

2016-01-01

We present nine "tech notes" prepared by the Large UV/Optical/Infrared (LUVOIR) Science and Technology Definition Team (STDT), Study Office, and Technology Working Group. These tech notes are intended to highlight technical challenges that represent boundaries in the trade space for developing the LUVOIR architecture that may impact the science objectives being developed by the STDT. These tech notes are intended to be high-level discussions of the technical challenges and will serve as starting points for more in-depth analysis as the LUVOIR study progresses.

Age correction in monitoring audiometry: method to update OSHA age-correction tables to include older workers.

PubMed

Dobie, Robert A; Wojcik, Nancy C

2015-07-13

The US Occupational Safety and Health Administration (OSHA) Noise Standard provides the option for employers to apply age corrections to employee audiograms to consider the contribution of ageing when determining whether a standard threshold shift has occurred. Current OSHA age-correction tables are based on 40-year-old data, with small samples and an upper age limit of 60 years. By comparison, recent data (1999-2006) show that hearing thresholds in the US population have improved. Because hearing thresholds have improved, and because older people are increasingly represented in noisy occupations, the OSHA tables no longer represent the current US workforce. This paper presents 2 options for updating the age-correction tables and extending values to age 75 years using recent population-based hearing survey data from the US National Health and Nutrition Examination Survey (NHANES). Both options provide scientifically derived age-correction values that can be easily adopted by OSHA to expand their regulatory guidance to include older workers. Regression analysis was used to derive new age-correction values using audiometric data from the 1999-2006 US NHANES. Using the NHANES median, better-ear thresholds fit to simple polynomial equations, new age-correction values were generated for both men and women for ages 20-75 years. The new age-correction values are presented as 2 options. The preferred option is to replace the current OSHA tables with the values derived from the NHANES median better-ear thresholds for ages 20-75 years. The alternative option is to retain the current OSHA age-correction values up to age 60 years and use the NHANES-based values for ages 61-75 years. Recent NHANES data offer a simple solution to the need for updated, population-based, age-correction tables for OSHA. The options presented here provide scientifically valid and relevant age-correction values which can be easily adopted by OSHA to expand their regulatory guidance to

On wiping the interior walls of 37-mm closed-face cassettes: an OSHA perspective.

PubMed

Hendricks, Warren; Stones, Fern; Lillquist, Dean

2009-12-01

As early as 1976, Occupational Safety and Health Administration (OSHA) methods for analyzing metal samples collected using 37-mm polystyrene closed-face cassettes specified that any loose dust be transferred from the cassette to the digestion vessel, that the cassette be rinsed, and that, if necessary, the cassette be wiped out to help ensure that all particles that enter the cassette are included along with the filter as part of the sample for analysis. OSHA analytical methods for metal analysis were recently revised to explicitly require cassette wiping for all metal samples. This change was based on policy that any material entering the collection device constitutes part of the sample and on OSHA Salt Lake Technical Center research showing that invisible residue on the cassette walls can significantly contribute to the total sample results reported. OSHA procedures are consistent with guidance given in the NIOSH Manual of Analytical Methods. This guidance concludes that internal deposits in sampling cassettes should be included in the analysis and that one way to accomplish this would be to wipe or wash the internal surfaces of the cassette and include the material along with the filter for analysis.

Tech Prep Implementation and Preliminary Student Outcomes for Eight Local Tech Prep Consortia.

ERIC Educational Resources Information Center

Bragg, Debra D.; Dare, Donna E.; Reger, W. M., IV; Ovaice, Ghazala; Zamani, Eboni M.; Layton, James D.; Dornsife, Carolyn J.; Vallee, Manuel; Brown, Carrie H.; Orr, Margaret Terry

The implementation and student outcomes of Tech Prep were examined in a study of eight consortia that represented a range of Tech Prep models and approaches in urban, suburban, and rural locations across the United States. Data were collected from the following sources: field visits; follow-up survey of Tech Prep participants and nonparticipants;…

Developing effective health and safety training materials for workers in beryllium-using industries.

PubMed

Mayer, A S; Brazile, W J; Erb, S A; Barker, E A; Miller, C M; Mroz, M M; Maier, L A; Van Dyke, M V

2013-07-01

Despite reduced workplace exposures, beryllium sensitization and chronic beryllium disease still occur. Effective health and safety training is needed. Through an Occupational Safety and Health Administration (OSHA) Targeted Topic Training grant and company partners, we developed a training program. Evaluation and validation included knowledge and training reaction assessments and training impact survey. We describe herein the iterative, five-pronged approach: (1) needs assessment; (2) materials development; (3) pilot-testing, evaluation, and material revisions; (4) worker training; and (5) evaluation and validation. Mean posttraining test score increased 14% (82% to 96%; P < 0.005) and were unchanged at 90-day follow-up (94%; P = 0.744). In addition, 49% reported making changes in work practices. The use of a five-pronged training program was effective and well received and resulted in improved work practices. These materials are available on the OSHA Web site.

Engineering controls for furniture strippers to meet the OSHA methylene chloride PEL.

PubMed

Estill, Cheryl Fairfield; Watkins, Daniel S; Shulman, Stanley A; Kurimo, Robert W; Kovein, Ronald J

2002-01-01

This case study demonstrates how methylene chloride exposures during furniture stripping can be reduced to below the Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) of 25 ppm (as an 8-hour time-weighted average). Five surveys were conducted at one facility; the first four resulted in employee exposure geometric means from 39 to 332 ppm. For the fifth survey local exhaust ventilation was used at the stripping tank and the rinsing area, which together exhausted 138 m3/min (4860 ft3/min). Additional controls included providing adequate make-up air, adding paraffin wax to the stripping solution, raising the level of the stripping solution in the tank, and discussing good work practices with the employee. The employees' methylene chloride exposures during the fifth survey resulted in a geometric mean of 5.6 ppm with a 95% upper confidence limit of 8.3 ppm, which was found to be significantly lower than the OSHA PEL and the OSHA action level of 12.5 ppm. The cost of the ventilation system was $8900.

Tech Team: Student Technology Assistants in the Elementary & Middle School.

ERIC Educational Resources Information Center

Peto, Erica; Onishi, Esther; Irish, Barbara

A step-by-step manual of worksheets, templates, forms and examples, this comprehensive handbook is designed for librarians, classroom teachers, and technology specialists who are interested in training students to be technology aides. The "Tech Team" program not only systematically outlines how one organizes and manages a support program, but…

Nalco Fuel Tech

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michalak, S.

1995-12-31

The Nalco Fuel Tech with its seat at Naperville (near Chicago), Illinois, is an engineering company working in the field of technology and equipment for environmental protection. A major portion of NALCO products constitute chemical materials and additives used in environmental protection technologies (waste-water treatment plants, water treatment, fuel modifiers, etc.). Basing in part on the experience, laboratories and RD potential of the mother company, the Nalco Fuel Tech Company developed and implemented in the power industry a series of technologies aimed at the reduction of environment-polluting products of fuel combustion. The engineering solution of Nalco Fuel Tech belong tomore » a new generation of environmental protection techniques developed in the USA. They consist in actions focused on the sources of pollutants, i.e., in upgrading the combustion chambers of power engineering plants, e.g., boilers or communal and/or industrial waste combustion units. The Nalco Fuel Tech development and research group cooperates with leading US investigation and research institutes.« less

Workplace safety and health improvements through a labor/management training and collaboration.

PubMed

Mahan, Bruce; Morawetz, John; Ruttenberg, Ruth; Workman, Rick

2013-01-01

Seven hundred thirty-nine workers at Merck's Stonewall plant in Elkton, Virginia, have a safer and healthier workplace because four of them were enthusiastic about health and safety training they received from the union's training center in Cincinnati, Ohio. What emerged was not only that all 739 plant employees received OSHA 10-hour General Industry training, but that it was delivered by "OSHA-authorized" members of the International Chemical Workers Union Council who worked at the plant. Merck created a new full-time position in its Learning and Development Department and filled it with one of the four workers who had received the initial training. Strong plant leadership promoted discussions both during the training, in evaluation, and in newly energized joint labor-management meetings following the training. These discussions identified safety and health issues needing attention. Then, in a new spirit of trust and collaboration, major improvements occurred.

Workplace Safety and Health Improvements Through a Labor/Management Training and Collaboration

PubMed Central

Mahan, Bruce; Morawetz, John; Ruttenberg, Ruth; Workman, Rick

2014-01-01

Seven hundred thirty-nine workers at Merck's Stonewall plant in Elkton, Virginia, have a safer and healthier workplace because four of them were enthusiastic about health and safety training they received from the union's training center in Cincinnati, Ohio. What emerged was not only that all 739 plant employees received OSHA 10-hour General Industry training, but that it was delivered by “OSHA-authorized” members of the International Chemical Workers Union Council who worked at the plant. Merck created a new fulltime position in its Learning and Development Department and hired one of the four workers who had received the initial training. Strong plant leadership promoted discussions both during the training, in evaluation, and in newly energized joint labor-management meetings following the training. These discussions identified safety and health issues needing attention. Then, in a new spirit of trust and collaboration, major improvements occurred. PMID:24704812

Safe and secure. How to create an effective OSHA compliance program in your practice.

PubMed

Anderson, Douglas G

2007-08-01

Medical group practice administrators have a responsibility to provide a safe working environment for their employees and patients. You must create an effective Occupational Safety and Health Administration (OSHA) compliance program in your organization. The complexity and diversity of OSHA standards are significant, and developing an effective program requires more than a cut-and-paste approach. This article describes the scope of the task, the steps to take and tools you can use.

Illinois Tech Prep Planning Strategies.

ERIC Educational Resources Information Center

Illinois Univ., Urbana. Dept. of Vocational and Technical Education.

This tech prep planning handbook is based on the research conducted at the Office of Community College Research and Leadership, University of Illinois at Urbana-Champaign. The study involved information gathering procedures at each of the 17 tech prep pilot sites about their planning activities. Seven sections are included: (1) tech prep in…

Adult Tech Prep.

ERIC Educational Resources Information Center

Schaad, Donna

For over 2 years, Blak Hawk College (Illinois) has provided high school equivalency (GED) candidates and recipients, older returning students, and underprepared high school graduates with a Tech Prep curriculum to give them the skills to make the transition from adult basic education to college or work. The Adult Tech Prep (ATP) core curriculum…

Former Addicts Find a Home (and a Scholarship) at Texas Tech.

ERIC Educational Resources Information Center

Gose, Ben

2000-01-01

Describes a program at Texas Tech University which offers scholarships to 36 recovering drug or alcohol addicts each semester as part of its Center for the Study of Addiction which trains addiction counselors. Notes the special admissions process for these students and their apparent success in the program. (DB)

RMP Guidance for Warehouses - Appendix D: OSHA Guidance on PSM

EPA Pesticide Factsheets

This text is taken directly from OSHA's appendix C to the Process Safety Management standard (29 CFR 1910.119). Compiled information required by this standard, including material safety data sheets (MSDS), is essential to process hazards analysis (PHA).

Superfund Training/Tech Transfer

EPA Pesticide Factsheets

This asset includes a collection of information resources, training, and other media related to hazardous waste site cleanup and characterization. A major part of this asset is the CLU-IN System, which is a collection of websites designed to be the central reference library for the development, collection, evaluation, coordination, and dissemination of information relating to the utilization of alternative or innovative treatment technologies... for cleaning up hazardous waste sites (Title 42 Section 9660 (b)(8)). Information includes Best Practices for using innovative technologies, case studies and focus areas about characterization and remediation technologies, emerging issues, optimization, and green(ing) remediation. CLU-IN is available via web-based documentation, live events, podcasts, and videos. Additionally, the Technology Innovation and Field Services Division (TIFSD) supports both classroom and online training registration through Trainex.org. All EPA content is also posted on EPA's website.

Ready for OSHA and MOSHA

ERIC Educational Resources Information Center

Smith, Nelson T.

1976-01-01

At north Arundel Vo-Tech in Maryland a well-organized safety program involves the entire school staff--plus Maryland Occupational Health and Safety Act. Strict enforcement of safety violations keeps everyone safety conscious--including the administration and custodial staff. (Editor/HD)

Design Compliance Matrices to ANSI and OSHA

DOE Office of Scientific and Technical Information (OSTI.GOV)

BENDIXSEN, R.B.

2000-04-03

U.S. Department of Energy Letter 98-SFD-028 requested Fluor Daniel Hanford, Inc. to provide clarifications as to compliance with ANSI 57.1, 57.2, 57.9, and 29 CFR 1910.179 (OSHA), in the form of an item-by-item compliance matrix, for the CSB. This Supporting Document contains Fluor Daniel, Inc.'s response for use by Fluor Daniel Hanford, Inc. regarding the clarifications requested by the U.S. Department of Energy.

They're Taking Requests: Student Techs Command the Help Desk

ERIC Educational Resources Information Center

Demski, Jennifer

2010-01-01

The new faces on the help desk are younger, work for cheap, and may be the tech savviest in the building. This article describes how two IT training programs are teaching students valuable technology skills while providing schools with a much-needed lift to their troubleshooting teams. The programs--Generation YES and Mouse Squad--put students at…

OSHA to inspect hospitals, medical clinics for use of safer needles. Occupational Safety and Health Administration.

PubMed

1999-11-26

The Occupational Safety and Health Administration (OSHA) has notified compliance officers of its intention to start imposing sanctions against health care facilities that do not use safe-needle devices. OSHA also said that facilities need to conduct yearly audits of their bloodborne pathogen programs, and must integrate new technologies wherever possible to protect their employees from exposure. Facilities affected include hospitals, home health service organizations, employment agencies, independent health care professionals, and independent contractors. About 800,000 hospital workers are accidentally punctured by needles each year. HIV is present in about 2 percent of those cases, but only a small number of workers actually contract the virus. The directive is available on the OSHA web site, and contact information is provided.

Client Perceptions of Occupational Health and Safety Management System Assistance Provided by OSHA On-Site Consultation: Results of a Survey of Colorado Small Business Consultation Clients.

PubMed

Autenrieth, Daniel A; Brazile, William J; Gilkey, David P; Reynolds, Stephen J; June, Cathy; Sandfort, Del

2015-01-01

The Occupational Safety and Health Administration (OSHA) On-Site Consultation Service provides assistance establishing occupational health and safety management systems (OHSMS) to small businesses. The Safety and Health Program Assessment Worksheet (Revised OSHA Form 33) is the instrument used by consultants to assess an organization's OHSMS and provide feedback on how to improve a system. A survey was developed to determine the usefulness of the Revised OSHA Form 33 from the perspective of Colorado OSHA consultation clients. One hundred and seven clients who had received consultation services within a six-year period responded to the survey. The vast majority of respondents indicated that the Revised OSHA Form 33 accurately reflected their OHSMS and that information provided on the Revised OSHA Form 33 was helpful for improving their systems. Specific outcomes reported by the respondents included increased safety awareness, reduced injuries, and improved morale. The results indicate that the OHSMS assistance provided by OSHA consultation is beneficial for clients and that the Revised OSHA Form 33 can be an effective tool for assessing and communicating OHSMS results to business management. Detailed comments and suggestions provided on the Revised OSHA Form 33 are helpful for clients to improve their OHSMS.

Adolescent occupational fatalities in North Carolina (1990-2008): an investigation of child labor and OSHA violations and enforcement.

PubMed

Rauscher, Kimberly; Runyan, Carol

2012-01-01

This study investigated adolescent worker fatalities involving violations of the child labor laws and/or Occupational Safety and Health Administration (OSHA) standards, as well as the enforcement activity involved in each case. Medical examiner records were used to identify work-related deaths among adolescents ages 11-17 between 1990 and 2008 and child labor violations. Investigations from state and federal Departments of Labor (DOL) were used to determine inspection activity, identify OSHA violations, and confirm child labor violations. Fifty-two percent of cases involved one or more child labor violations. Nine cases were investigated by either the U.S. or North Carolina DOL; among them, four had child labor violations. Eleven cases were investigated by the North Carolina DOL and all involved OSHA violations. Significant child labor and OSHA violations exist in adolescent worker fatalities in North Carolina, and gaps exist in enforcement at both the federal and state level, signaling needed improvements in the protection of adolescent workers.

Informing Workers of Chemical Hazards: The OSHA Hazard Communication Standard.

ERIC Educational Resources Information Center

American Chemical Society, Washington, DC.

Practical information on how to implement a chemical-related safety program is outlined in this publication. Highlights of the federal Occupational Safety and Health Administrations (OSHA) Hazard Communication Standard are presented and explained. These include: (1) hazard communication requirements (consisting of warning labels, material safety…

76 FR 2417 - OSHA-7 Form (“Notice of Alleged Safety and Health Hazards”); Extension of the Office of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-13

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0056] OSHA-7 Form (``Notice of Alleged Safety and Health Hazards''); Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements AGENCY: Occupational Safety...

Compliance with OSHA record-keeping requirements.

PubMed Central

Seligman, P J; Sieber, W K; Pedersen, D H; Sundin, D S; Frazier, T M

1988-01-01

The Occupational Safety and Health Act of 1970 requires employers to maintain records of workplace injuries and illnesses. To assess compliance with the law, data from the National Occupational Exposure Survey (NOES) were examined. Of the 4,185 companies with 11 or more employees, 75 per cent maintained OSHA Form 200 designed for recording illnesses and injuries. The number of employees and the presence of a union were positive determinants in the record maintenance. Of companies with 500 or more employees, 95 per cent kept records compared with 60 per cent of companies with between 11 and 99 employees. PMID:3407825

A descriptive study of U.S. OSHA penalties and inspection frequency for musculoskeletal disorders in the workplace.

PubMed

Courtney, T K; Clancy, E A

1998-08-01

Information on the frequency and cost of OSHA enforcement penalties for musculoskeletal disorders (MSD) in the literature is limited. Such information would be of value to organizations in estimating the likelihood and financial impact of enforcement activity in their operations. This descriptive study utilized data from federal Occupational Safety and Health Administration (OSHA) inspections to examine the distribution of penalty costs arising from inspections with MSD-related citations from January 1985 to June 1994 and to estimate the probability of OSHA inspection in general and OSHA citation for MSD hazards from October 1985 to September 1993. The mean and median values of proposed penalties were $47,707 and $3600 respectively. A substantial influence of 1991 changes to the penalty structure was noted with decreasing mean and increasing median penalty values. Penalty values increased with establishment size and were higher for unplanned than for planned inspections. The probability of a federal OSHA inspection for any establishment ranged from 1:50 in 1986 to 1:100 in 1993 whereas the estimated probability of an inspection with MSD-related citations ranged from 1:167,000 in 1996 to as much as 1:38,000 during the peak of enforcement activity in 1990. The probability of an inspection with MSD citations for the largest establishments during the period was more than 1000 times greater than that for the smallest. The results of this study may be utilized by organizations seeking to demonstrate the advantages of reducing musculoskeletal morbidity in the workplace.

Review of the OSHA framework for oversight of occupational environments.

PubMed

Choi, Jae-Young; Ramachandran, Gurumurthy

2009-01-01

The OSHA system for oversight of chemicals in the workplace was evaluated to derive lessons for oversight of nanotechnology. Criteria relating to the development, attributes, evolution, and outcomes of the system were used for evaluation that was based upon quantitative expert elicitation and historical literature analysis. The oversight system had inadequate resources in terms of finances, expertise, and personnel, and insufficient incentive for compliance. The system showed a lack of flexibility in novel situations. There were minimal requirements on companies for data on health and safety of their products. These factors have a strong influence on public confidence and health and safety. The oversight system also scored low on attributes such as public input, transparency, empirical basis, conflict of interest, and informed consent. The experts in our sample tend to believe that the current oversight system for chemicals in the workplace is neither adequate nor effective. It is very likely that the performance of the OSHA oversight system for nanomaterials will be equally inadequate.

Evaluating OSHA's ethylene oxide standard: employer exposure-monitoring activities in Massachusetts hospitals from 1985 through 1993.

PubMed Central

LaMontagne, A D; Kelsey, K T

1997-01-01

OBJECTIVES: This study characterized exposure-monitoring activities and findings under the Occupational Safety and Health Administration's (OSHA's) 1984 ethylene oxide (EtO) standard. METHODS: In-depth mail and telephone surveys were followed by on-site interviews at all EtO-using hospitals in Massachusetts (n = 92, 96% participation rate). RESULTS: By 1993, most hospitals had performed personal exposure monitoring for OSHA's 8-hour action level (95%) and the excursion limit (87%), although most did not meet the 1985 implementation deadline. In 1993, 66% of hospitals reported the installation of EtO alarms to fulfill the standard's "alert" requirement. Alarm installation also lagged behind the 1985 deadline and peaked following a series of EtO citations by OSHA. From 1990 through 1992, 23% of hospitals reported having exceeded the action level once or more; 24% reported having exceeded the excursion limit; and 33% reported that workers were accidentally exposed to EtO in the absence of personal monitoring. CONCLUSIONS: Almost a decade after passage of the EtO standard, exposure-monitoring requirements were widely, but not completely, implemented. Work-shift exposures had markedly decreased since the mid-1980s, but overexposures continued to occur widely. OSHA enforcement appears to have stimulated implementation. PMID:9240100

NASA Tech House

NASA Technical Reports Server (NTRS)

1977-01-01

The NASA Technology Utilization House, called Tech House, was designed and constructed at NASA's Langley Research Center in Hampton, Virginia, to demonstrate new technology that is available or will be available in the next several years and how the application of aerospace technology could help advance the homebuilding industry. Solar energy use, energy and water conservation, safety, security, and cost were major considerations in adapting the aerospace technology to the construction of Tech House.

A new estimate of the impact of OSHA inspections on manufacturing injury rates, 1998-2005.

PubMed

Haviland, Amelia M; Burns, Rachel M; Gray, Wayne B; Ruder, Teague; Mendeloff, John

2012-11-01

A prior study indicated that the effect of OSHA inspections on lost workday injuries had declined from 1979 through 1998. This study provides an updated estimate for 1998-2005. Injury data from the Pennsylvania workers' compensation program were linked with employment data from unemployment compensation records to calculate lost-time rates for single-establishment manufacturing firms with more than 10 employees. These rates were linked to OSHA inspection findings. The RAND Human Subjects Protection Committee determined that this study was exempt from review. Inspections with penalties reduced injuries by an average of 19-24% annually in the 2 years following the inspection. These effects were not found for workplaces with fewer than 20 or more than 250 employees or for inspections without penalties. These findings should be generalizable to the 29 states where federal OSHA directly enforces standards. They suggest that the impact of inspections has increased from the 1990s. Copyright © 2012 Wiley Periodicals, Inc.

Employer Rights and Responsibilities Following an OSHA Inspection

DTIC Science & Technology

1999-01-01

and health programs, some states require such programs; and • In state plan states, an employee who believes he/she has been discriminated against... employee who has exercised any right under this law, including the right to make safety and health complaints or to request an OSHA inspection.Complaints...the OSH Act clearly states that you have a continuing respon- sibility to comply with the OSH Act and assure your employees of safe and healthful

The OSHA Communication Standard and State Right-to-Know Laws.

ERIC Educational Resources Information Center

Roll, Michalene H.

1990-01-01

As a result of a 1988 federal appellate court mandate, schools and colleges in 24 states and 2 territories with OSHA-approved state plans must inform their employees about hazardous chemicals to which they may be exposed. School administrators should implement a responsible program meeting regulatory compliance, tort liability, and public…

Selected science: an industry campaign to undermine an OSHA hexavalent chromium standard

PubMed Central

Michaels, David; Monforton, Celeste; Lurie, Peter

2006-01-01

While exposure to hexavalent chromium (Cr(VI)) has been associated with increased lung cancer risk for more than 50 years, the chemical is not currently regulated by the U.S. Occupational Safety and Health Administration (OSHA) on the basis of its carcinogenicity. The agency was petitioned in 1993 and sued in 1997 and 2002 to lower the workplace Cr(VI) exposure limit, resulting in a court order to issue a final standard by February 2006. Faced with the threat of stronger regulation, the chromium industry initiated an effort to challenge the scientific evidence supporting a more protective standard. This effort included the use of "product defense" consultants to conduct post hoc analyses of a publicly-funded study to challenge results viewed unfavorably by the industry. The industry also commissioned a study of the mortality experience of workers at four low-exposure chromium plants, but did not make the results available to OSHA in a timely manner, despite multiple agency requests for precisely these sorts of data. The commissioned study found a statistically significant elevation in lung cancer risk among Cr(VI)-exposed workers at levels far below the current standard. This finding changed when the multi-plant cohort was divided into two statistically underpowered components and then published separately. The findings of the first paper published have been used by the chromium industry to attempt to slow OSHA's standard setting process. The second paper was withheld from OSHA until it was accepted for publication in a scientific journal, after the rulemaking record had closed. Studies funded by private sponsors that seek to influence public regulatory proceedings should be subject to the same access and reporting provisions as those applied to publicly funded science. Parties in regulatory proceedings should be required to disclose whether the studies were performed by researchers who had the right to present their findings without the sponsor's consent or

The final word. OSHA's final ruling offers firm deadlines for infection control.

PubMed

West, K

1992-03-01

Departments that have put off program development while waiting for the final ruling to be published have a lot of work to do. Many departments have been cited and fined by OSHA in the past year for failure to begin infection-control programs or provide hepatitis-B vaccines to personnel. Under the new budget, OSHA was granted permission to up its fine structure sevenfold--thus, a small fine is $7,000, and the highest fine for a single violation is $70,000. Fines can have a greater impact on a department's budget than implementation of the program over time. A key point to remember is that a strong infection-control program will reduce exposure follow-up costs and worker-compensation claims. Infection control is a win-win situation.

Plant Operations. OSHA on Campus: Campus Safety Officers Discuss Problems and Potentials

ERIC Educational Resources Information Center

Kuchta, Joseph F.; And Others

1973-01-01

The Occupation Safety and Health Act (OSHA) has presented campus safety officers with new problems, but it is also offering them new potentials, which were explored at the recent national conference on Campus Security. (Editor)

75 FR 57503 - Application for Training Grant; Extension of the Office of Management and Budget's (OMB) Approval...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... training, inform them of the importance and proper use of safety and health equipment, and train employers... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0029] Application for Training Grant; Extension of the Office of Management and Budget's (OMB) Approval of...

Design Tech High School: d.tech

ERIC Educational Resources Information Center

EDUCAUSE, 2015

2015-01-01

A Bay Area charter high school, d.tech develops "innovation-ready" students by combining content knowledge with the design thinking process while fostering a sense of autonomy and purpose. The academic model is grounded in self-paced learning through a flex schedule, high standards, and design thinking through a four-year design…

The impact of OSHA regulations on nursing care cost and compliance.

PubMed

Raltz, S; Kozarek, R A; Kim-Deobald, J; Pethigal, P; Moorhouse, M A

1994-01-01

The Occupational Safety and Health Administration (OSHA) requires health care facilities to protect employees from bloodborne pathogens. One of the mandates is to provide personal protective equipment (PPE) to employees at no cost to the employee. In this article, the authors explore the cost and compliance of implementing the new OSHA regulations for nursing staff assisting with colonoscopies over a 6-month period. The data were collected on a total of 461 procedures. The cost of implementing PPE for the nursing staff was $2.98 per procedure. The PPE available for the nursing staff included goggles, splash-proof gown, face mask, shoe covers, and latex gloves. The total cost of implementing the new regulations for the nursing staff assisting with colonoscopies was $2,747.56 and was projected to cost approximately $50,000 yearly if implemented for all GI procedures in the institution. Staff compliance rates for the five pieces of PPE ranged from 6.5 to 97.8%.

Surveillance of occupational noise exposures using OSHA's Integrated Management Information System.

PubMed

Middendorf, Paul J

2004-11-01

Exposure to noise has long been known to cause hearing loss, and is an ubiquitous problem in workplaces. Occupational noise exposures for industries stored in the Occupational Safety and Health Administration's (OSHA) Integrated Management Information System (IMIS) can be used to identify temporal and industrial trends of noise exposure to anticipate changes in rates of hearing loss. The noise records in OSHA's IMIS database for 1979-1999 were extracted by major industry division and measurement criteria. The noise exposures were summarized by year, industry, and employment size. The majority of records are from Manufacturing and Services. Exposures in Manufacturing and Services have decreased during the period, except that PEL exposures measured by federal enforcement increased from 1995 to 1999. Noise exposures in manufacturing have been reduced since the late 1970s, except those documented by federal enforcement. Noise exposure data outside manufacturing is not well represented in IMIS. Copyright 2004 Wiley-Liss, Inc.

The future of the OSHA PSM standard.

PubMed

Kaelin, David E

2014-07-01

The significance of the proposed PSM changes could be to greatly expand coverage of processes in order to include many not currently covered by the PSM regulation. New chemicals will likely be added to Appendix A, and reactive chemicals (a definition will be needed) also may be covered. What exactly will be the definition of a reactive chemical is unclear at this time, although definitions used in New Jersey in the TCPA Act may guide OSHA. It is likely that atmospheric storage of flammable liquids will be included more specifically and the exemption of these tanks eliminated. In applying RAGAGEP, sites may be required to apply the most recent codes and standards to covered processes, perhaps at the time of PHA auditing: A narrowing of the PSM exemption for retail facilities could bring many of them under the PSM regulation at some level. Process safety management practices should be applied to all facilities that store and process hazardous materials that have fire, explosion, reactivity, and toxic properties. If changes are made to the PSM regulation, many new sites will be covered and will need to formally adopt PSM as defined in the OSHA regulation. The addition of reactive chemicals to the PSM regulation will greatly expand the number of processes covered by the regulation. Keeping up with the most current codes, standards, and legislative changes is a daunting task that may require the support of specialists. The results of the proposed legislation will be an increase in the level of process safety excellence throughout the chemical industries.

The impact of OSHA recordkeeping regulation changes on occupational injury and illness trends in the US: a time-series analysis.

PubMed

Friedman, Lee S; Forst, Linda

2007-07-01

The Survey of Occupational Injuries and Illnesses (SOII), based on Occupational Safety and Health Administration (OSHA) logs, indicates that the number of occupational injuries and illnesses in the US has steadily declined by 35.8% between 1992-2003. However, major changes to the OSHA recordkeeping standard occurred in 1995 and 2001. The authors assessed the relation between changes in OSHA recordkeeping regulations and the trend in occupational injuries and illnesses. SOII data available from the Bureau of Labor Statistics for years 1992-2003 were collected. The authors assessed time series data using join-point regression models. Before the first major recordkeeping change in 1995, injuries and illnesses declined annually by 0.5%. In the period 1995-2000 the slope declined by 3.1% annually (95% CI -3.7% to -2.5%), followed by another more precipitous decline occurring in 2001-2003 (-8.3%; 95% CI -10.0% to -6.6%). When stratifying the data, the authors continued to observe significant changes occurring in 1995 and 2001. The substantial declines in the number of injuries and illnesses correspond directly with changes in OSHA recordkeeping rules. Changes in employment, productivity, OSHA enforcement activity and sampling error do not explain the large decline. Based on the baseline slope (join-point regression analysis, 1992-4), the authors expected a decline of 407 964 injuries and illnesses during the period of follow-up if no intervention occurred; they actually observed a decline of 2.4 million injuries and illnesses of which 2 million or 83% of the decline can be attributed to the change in the OSHA recordkeeping rules.

OSHA's bloodborne pathogens rule an opportunity/threat.

PubMed

Weller, S C

1992-02-01

If you supply healthcare linen, OSHA's new ruling comes with a price tag, but it may be a marketing boon as well. The costs of compliance are high--about $1.19 million annually. One of the most costly and important parts of the ruling is the required employer-paid hepatitis B vaccination of employees. But behind the costs, there's good news for the textile rental industry. The opportunity to serve small medical facilities and nursing homes as well as hospitals with reusable healthcare garments could create a revenue source estimated to be at least $177 million a year.

Continuing exposure to hexavalent chromium, a known lung carcinogen: an analysis of OSHA compliance inspections, 1990-2000.

PubMed

Lurie, Peter; Wolfe, Sidney M

2002-11-01

Hexavalent chromium is widely recognized to be a lung carcinogen. However, the U.S. Occupational Safety and Health Administration (OSHA) has failed to reduce the permissible exposure limit (PEL), despite having acknowledged in 1994 that the current limit is too high. In 1993, Public Citizen and the Paper, Allied-Industrial, Chemical and Energy Workers International Union (PACE) petitioned to lower the PEL from the current 100 microg/m(3) to 0.5 microg/m(3) as an 8-hr time-weighted average (TWA). To assess industry compliance with the current PEL, and to determine the feasibility of achieving the proposed lower limit of 0.5 microg/m(3), we conducted a secondary data analysis of OSHA's Integrated Management Information System (IMIS) database. This database contains 813 measurements of hexavalent chromium exposure from inspections performed during the years 1990-2000. There was a statistically significant decline in the annual number of measurements over the study period from 127 in 1990 to 67 in 2000 (F = 0.0009; linear regression). The median TWA measurement was 10 microg/m(3) (range: 0.01-13,960 microg/m(3)) and the median ceiling measurement was 40.5 microg/m(3) (range: 0.25-25,000 microg/m(3)). Neither median TWA nor median ceiling exposures (if hexavalent chromium was detected) declined significantly during the study period (F = 0.065 and 0.57, respectively). Overall, 13.7% of TWA measurements were at or below the Public Citizen/PACE proposed standard; 65.0% were between the Public Citizen/PACE proposal and the current OSHA PEL; and 21.3% exceeded the OSHA PEL. Compared to OSHA measurements, state measurements were less likely to detect hexavalent chromium (40.2% vs. 52.1%; P = 0.0007; chi-square) and less likely to issue any citation (9.3% vs. 19.1%; P = 0.0003), including citations for overexposure if the exposure exceeded the PEL (54.8% vs. 78.8%; P = 0.012). U.S. workers continue to be exposed to dangerously high hexavalent chromium levels, but low exposure

Trends in OSHA Compliance Monitoring Data 1979-2011: Statistical Modeling of Ancillary Information across 77 Chemicals.

PubMed

Sarazin, Philippe; Burstyn, Igor; Kincl, Laurel; Lavoué, Jérôme

2016-05-01

The Integrated Management Information System (IMIS) is the largest multi-industry source of exposure measurements available in North America. However, many have suspected that the criteria through which worksites are selected for inspection are related to exposure levels. We investigated associations between exposure levels and ancillary variables in IMIS in order to understand the predictors of high exposure within an enforcement context. We analyzed the association between nine variables (reason for inspection, establishment size, total amount of penalty, Occupational Safety and Health Administration (OSHA) plan, OSHA region, union status, inspection scope, year, and industry) and exposure levels in IMIS using multimodel inference for 77 agents. For each agent, we used two different types of models: (i) logistic models were used for the odds ratio (OR) of exposure being above the threshold limit value (TLV) and (ii) linear models were used for exposure concentrations restricted to detected results to estimate percent increase in exposure level, i.e. relative index of exposure (RIE). Meta-analytic methods were used to combine results for each variable across agents. A total of 511,047 exposure measurements were modeled for logistic models and 299,791 for linear models. Higher exposures were measured during follow-up inspections than planned inspections [meta-OR = 1.61, 95% confidence interval (CI): 1.44-1.81; meta-RIE = 1.06, 95% CI: 1.03-1.09]. Lower exposures were observed for measurements collected under state OSHA plans compared to measurements collected under federal OSHA (meta-OR = 0.82, 95% CI: 0.73-0.92; meta-RIE = 0.86, 95% CI: 0.81-0.91). A 'high' total historical amount of penalty relative to none was associated with higher exposures (meta-OR = 1.54, 95% CI: 1.40-1.71; meta-RIE = 1.18, 95% CI: 1.13-1.23). The relationships observed between exposure levels and ancillary variables across a vast majority of agents suggest that certain elements of OSHA

Planning a Successful Tech Show

ERIC Educational Resources Information Center

Nikirk, Martin

2011-01-01

Tech shows are a great way to introduce prospective students, parents, and local business and industry to a technology and engineering or career and technical education program. In addition to showcasing instructional programs, a tech show allows students to demonstrate their professionalism and skills, practice public presentations, and interact…

Project Georgia High School/High Tech

NASA Technical Reports Server (NTRS)

2000-01-01

The High School/High Tech initiative of the President's Committee on Employment of Disabilities, Georgia's application of the collaborative "Georgia Model" and NASA's commitment of funding have shown that opportunities for High School/High Tech students are unlimited. In Georgia, the partnership approach to meeting the needs of this program has opened doors previously closed. As the program grows and develops, reflecting the needs of our students and the marketplace, more opportunities will be available. Our collaboratives are there to provide these opportunities and meet the challenge of matching our students with appropriate education and career goals. Summing up the activities and outcomes of Project Georgia High School/High Tech is not difficult. Significant outcomes have already occurred in the Savannah area as a result of NASA's grant. The support of NASA has enabled Georgia Committee to "grow" High School/High Tech throughout the region-and, by example, the state. The success of the Columbus pilot project has fostered the proliferation of projects, resulting in more than 30 Georgia High School High Tech programs-with eight in the Savannah area.

All About OSHA: The Who, What, Where, When, Why and How of the Occupational Safety and Health Act of 1970.

ERIC Educational Resources Information Center

Occupational Safety and Health Administration, Washington, DC.

The pamphlet summarizes the operations of the Occupational Safety and Health Administration (OSHA) and the provisions of the Occupational Safety and Health Act of 1970. OSHA's mission is to assure safe and healthful working conditions and to preserve human resources. Employers and employees who are covered by the act and employer and employee…

76 FR 80735 - Corrections and Technical Amendments to 16 OSHA Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

.... Given the information technologies available in the 1980s, large posters containing the tire-servicing... distributing large numbers of these posters. In updating this information, OSHA decided not to print large posters with the updated information, but to provide an 8\\1/2\\ inch by 11-inch printed manual containing...

29 CFR 1912a.10 - Presence of OSHA officer or employee.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Presence of OSHA officer or employee. 1912a.10 Section 1912a.10 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) NATIONAL ADVISORY COMMITTEE ON OCCUPATIONAL SAFETY AND HEALTH § 1912a.10...

29 CFR 1912a.10 - Presence of OSHA officer or employee.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Presence of OSHA officer or employee. 1912a.10 Section 1912a.10 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) NATIONAL ADVISORY COMMITTEE ON OCCUPATIONAL SAFETY AND HEALTH § 1912a.10...

29 CFR 1912a.10 - Presence of OSHA officer or employee.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Presence of OSHA officer or employee. 1912a.10 Section 1912a.10 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) NATIONAL ADVISORY COMMITTEE ON OCCUPATIONAL SAFETY AND HEALTH § 1912a.10...

29 CFR 1912a.10 - Presence of OSHA officer or employee.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Presence of OSHA officer or employee. 1912a.10 Section 1912a.10 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) NATIONAL ADVISORY COMMITTEE ON OCCUPATIONAL SAFETY AND HEALTH § 1912a.10...

The impact of OSHA recordkeeping regulation changes on occupational injury and illness trends in the US: a time‐series analysis

PubMed Central

Friedman, Lee S; Forst, Linda

2007-01-01

Objectives The Survey of Occupational Injuries and Illnesses (SOII), based on Occupational Safety and Health Administration (OSHA) logs, indicates that the number of occupational injuries and illnesses in the US has steadily declined by 35.8% between 1992–2003. However, major changes to the OSHA recordkeeping standard occurred in 1995 and 2001. The authors assessed the relation between changes in OSHA recordkeeping regulations and the trend in occupational injuries and illnesses. Methods SOII data available from the Bureau of Labor Statistics for years 1992–2003 were collected. The authors assessed time series data using join‐point regression models. Results Before the first major recordkeeping change in 1995, injuries and illnesses declined annually by 0.5%. In the period 1995–2000 the slope declined by 3.1% annually (95% CI −3.7% to −2.5%), followed by another more precipitous decline occurring in 2001–2003 (−8.3%; 95% CI −10.0% to −6.6%). When stratifying the data, the authors continued to observe significant changes occurring in 1995 and 2001. Conclusions The substantial declines in the number of injuries and illnesses correspond directly with changes in OSHA recordkeeping rules. Changes in employment, productivity, OSHA enforcement activity and sampling error do not explain the large decline. Based on the baseline slope (join‐point regression analysis, 1992–4), the authors expected a decline of 407 964 injuries and illnesses during the period of follow‐up if no intervention occurred; they actually observed a decline of 2.4 million injuries and illnesses of which 2 million or 83% of the decline can be attributed to the change in the OSHA recordkeeping rules. PMID:17303676

Long-Term Ethylene Oxide Exposure Trends in US Hospitals: Relationship With OSHA Regulatory and Enforcement Actions

PubMed Central

LaMontagne, Anthony D.; Oakes, J. Michael; Lopez Turley, Ruth N.

2004-01-01

Objectives. We assessed long-term trends in ethylene oxide (EtO) worker exposures for the purposes of exposure surveillance and evaluation of the impacts of the Occupational Safety and Health Administration (OSHA) 1984 and 1988 EtO standards. Methods. We obtained exposure data from a large commercial vendor and processor of EtO passive dosimeters. Personal samples (87 582 workshift [8-hr] and 46 097 short-term [15-min] samples) from 2265 US hospitals were analyzed for time trends from 1984 through 2001 and compared with OSHA enforcement data. Results. Exposures declined steadily for the first several years after the OSHA standards were set. Workshift exposures continued to taper off and have remained low and constant through 2001. However, since 1996, the probability of exceeding the short-term excursion limit has increased. This trend coincides with a decline in enforcement of the EtO standard. Conclusions. Results indicate the need for renewed intervention efforts to preserve gains made following the passage and implementation of the 1984 and 1988 EtO standards. PMID:15333324

78 FR 65932 - Updating OSHA Standards Based on National Consensus Standards; Signage

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-04

...; Signage AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION... accompanied its direct final rule revising its signage standards for general industry and construction. DATES... proposed rule (NPRM) along with the direct final rule (DFR) (see 78 FR 35585) updating its signage...

A legacy of struggle: the OSHA ergonomics standard and beyond, Part I.

PubMed

Delp, Linda; Mojtahedi, Zahra; Sheikh, Hina; Lemus, Jackie

2014-11-01

In November 2000, the Occupational Safety and Health Administration (OSHA) issued an ergonomics standard to prevent debilitating work-related musculoskeletal disorders (WMSDs). It was rescinded by Congress within four months. We explore how this story unfolded over two decades of collaboration and conflict. Part I provides an overview of the historical context of the struggle for a standard, followed by interviews with key players from labor, academia and government. They provide a snapshot of the standard; discuss the prevalence of WMSDs in the context of changing work organization; give insight into the role of unions and of scientific debate within the context of rulemaking; and uncover the basis for the groundbreaking OSHA citations that laid the foundation for a standard. Part II interviews further explore the anti-regulatory political landscape of the 1990s that led to repeal of the standard, discuss the impact of the struggle beyond the standard, and describe creative approaches for the future.

Surveillance of Washington OSHA exposure data to identify uncharacterized or emerging occupational health hazards.

PubMed

Lofgren, Don J; Reeb-Whitaker, Carolyn K; Adams, Darrin

2010-07-01

Chemical substance exposure data from the Washington State Occupational Safety and Health Administration (OSHA) program were reviewed to determine if inspections conducted as a result of a report of a hazard from a complainant or referent may alert the agency to uncharacterized or emerging health hazards. Exposure and other electronically stored data from 6890 health inspection reports conducted between April 2003 and August 2008 were extracted from agency records. A total of 515 (7%) inspections with one or more personal airborne chemical substance samples were identified for further study. Inspections by report of a hazard and by targeting were compared for the following: number of inspections, number and percentage of inspections with workers exposed to substances above an agency's permissible exposure limit, types of industries inspected, and number and type of chemical substances assessed. Report of a hazard inspections documented work sites with worker overexposure at the same rate as agency targeted inspections (approximately 35% of the time), suggesting that complainants and referents are a credible pool of observers capable of directing the agency to airborne chemical substance hazards. Report of a hazard inspections were associated with significantly broader distribution of industries as well as a greater variety of chemical substance exposures than were targeted inspections. Narrative text that described business type and processes inspected was more useful than NAICS codes alone and critical in identifying processes and industries that may be associated with new hazards. Finally, previously identified emerging hazards were found among the report of a hazard data. These findings indicate that surveillance of OSHA inspection data can be a valid tool to identify uncharacterized and emerging health hazards. Additional research is needed to develop criteria for objective review and prioritization of the data for intervention. Federal OSHA and other state

TechEdSat Nano-Satellite Series Fact Sheet

NASA Technical Reports Server (NTRS)

Murbach, Marcus; Martinez, Andres; Guarneros Luna, Ali

2014-01-01

TechEdSat-3p is the second generation in the TechEdSat-X series. The TechEdSat Series uses the CubeSat standards established by the California Polytechnic State University Cal Poly), San Luis Obispo. With typical blocks being constructed from 1-unit (1U 10x10x10 cm) increments, the TechEdSat-3p has a 3U volume with a 30 cm length. The project uniquely pairs advanced university students with NASA researchers in a rapid design-to-flight experience lasting 1-2 semesters.The TechEdSat Nano-Satellite Series provides a rapid platform for testing technologies for future NASA Earth and planetary missions, as well as providing students with an early exposure to flight hardware development and management.

OSHA's approach to risk assessment for setting a revised occupational exposure standard for 1,3-butadiene.

PubMed Central

Grossman, E A; Martonik, J

1990-01-01

In its 1980 benzene decision [Industrial Union Department, ALF-CIO v. American Petroleum Institute, 448 U.S. 607 (1980)], the Supreme Court ruled that "before he can promulgate any permanent health or safety standard, the Secretary [of Labor] is required to make a threshold finding that a place of employment is unsafe--in the sense that significant risks are present and can be lessened by a change in practices" (448 U.S. at 642). The Occupational Safety and Health Administration (OSHA) has interpreted this to mean that whenever possible, it must quantify the risk associated with occupational exposure to a toxic substance at the current permissible exposure limit (PEL). If OSHA determines that there is significant risk to workers' health at its current standard, then it must quantify the risk associated with a variety of alternative standards to determine at what level, if any, occupational exposure to a substance no longer poses a significant risk. For rulemaking on occupational exposure to 1,3-butadiene, there are two studies that are suitable for quantitative risk assessment. One is a mouse inhalation bioassay conducted by the National Toxicology Program (NTP), and the other is a rat inhalation bioassay conducted by Hazelton Laboratories Europe. Of the four risk assessments that have been submitted to OSHA, all four have used the mouse and/or rat data with a variety of models to quantify the risk associated with occupational exposure to 1,3-butadiene. In addition, OSHA has performed its own risk assessment using the female mouse and female rat data and the one-hit and multistage models.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2401254

Radon in the Workplace: the Occupational Safety and Health Administration (OSHA) Ionizing Radiation Standard.

PubMed

Lewis, Robert K

2016-10-01

On 29 December 1970, the Occupational Safety and Health Act of 1970 established the Occupational Safety and Health Administration (OSHA). This article on OSHA, Title 29, Part 1910.1096 Ionizing Radiation standard was written to increase awareness of the employer, the workforce, state and federal governments, and those in the radon industry who perform radon testing and radon mitigation of the existence of these regulations, particularly the radon relevant aspect of the regulations. This review paper was also written to try to explain what can sometimes be complicated regulations. As the author works within the Radon Division of the Pennsylvania Department of Environmental Protection, Bureau of Radiation Protection, the exclusive focus of the article is on radon. The 1910.1096 standard obviously covers many other aspects of radiation and radiation safety in the work place.

OSHA's renewed mandate for regulatory flexibility review: in support of the 1984 ethylene oxide standard.

PubMed

LaMontagne, A D; Kelsey, K T

1998-08-01

The Regulatory Flexibility Act of 1980 requires that all federal agencies consider the impact of regulations on small entities. One of the provisions of the Act requires review of regulations ever 10 years to determine whether such regulations should be continued without changes, rescinded, or amended to make them more effective or less burdensome on businesses. The Small Business Regulatory Enforcement Fairness Act (SBREFA) of 1996 amended and expanded the Regulatory Flexibility Act. Most significantly, SBREFA entitles aggrieved small entities or their representative (e.g., trade associations) to sue OSHA for failure to fulfill Regulatory Flexibility Act requirements. In response to this new political reality, OSHA held the first public meeting of their kind in June of 1997 to gather information on the ethylene oxide and lock-out/tag-out standards for the purposes of Regulatory Flexibility review. This paper presents the development of the Regulatory Flexibility review process and details our analysis of the ethylene oxide standard using OSHA's eight Regulatory Flexibility review criteria. Great progress in ethylene oxide health and safety has been made since the promulgation of the standard in 1984, including a considerable decrease in average workshift exposures. Yet, important concerns remain, such as the lack of safer substitutes for EtO's most common uses, the widespread occurrence of accidental exposures to EtO that are not captured by personal monitoring, and the recent increase in the occurrence of catastrophic EtO explosions. Because of the considerable study that has been devoted to EtO and to the EtO standard, there is a very strong cases for either making the EtO standard more worker protective, or continuing the standard without change while improving outreach and enforcement efforts to address shortcomings. Other valuable standards for which fewer data exist may be inappropriately threatened by the Regulatory Flexibility review process. Importantly

78 FR 35559 - Updating OSHA Standards Based on National Consensus Standards; Signage

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-13

...; Signage AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION: Direct... signage standards by adding references to the latest versions of the American National Standards Institute... earlier ANSI standards, ANSI Z53.1-1967, Z35.1-1968 and Z35.2-1968, in its signage standards, thereby...

Georgia Tech

Science.gov Websites

Family Programs Dean of Students Scholarships & Financial Aid Employee, Alumni, & Other Resources Education Georgia Tech Online Academic Calendar Admissions Prospective Students Admissions Overview roots extend worldwide, creating international business connections and giving students unique research

78 FR 28895 - Susan Harwood Training Grant Program, FY 2013

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-16

... Program, FY 2013 AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice of... Thursday, June 13, 2013, the application deadline date. ADDRESSES: The complete Susan Harwood Training... Order No. 1-2012 (77 FR 3912). Signed at Washington, DC, on May 13, 2013. David Michaels, Assistant...

Tech Prep Compendium of Models. [Revised].

ERIC Educational Resources Information Center

Delaware Technical and Community Coll., Dover.

This publication discusses four models for technical preparation (tech prep): program organization; student progress; tech prep data collection and evaluation model; and school/community. The program organization model is divided into four sections. Section I, the business industry, and labor section, shows the flow from craft committee and…

High Tech Training at Arthur Andersen and Co.

ERIC Educational Resources Information Center

Dennis, Verl E.

1984-01-01

Discusses Arthur Andersen and Company's reasons for using high technology in job training, including its ability to improve productivity, provide training on demand, reduce training costs, and keep educational quality consistent. A Life Cycle Model which is used to integrate high technology into this accounting company's educational programs is…

Are your employees protected from blood-borne pathogens? OSHA standards charge textile rental companies with responsibility for worker safety.

PubMed

Weller, S C

1991-11-01

Congress is putting pressure on OSHA to finalize its Universal Precaution standards by December. When the standards go into effect, textile rental companies that serve medical, dental, and outpatient care facilities--including private physician and dentist offices--must take steps to protect employees from blood-borne pathogens. Soiled linens, towels, gowns, and other items from any customer in risk categories link a textile rental facility and/or commercial laundry with the OSHA regulations. Read and heed this information.

29 CFR 500.132 - Applicable Federal standards: ETA and OSHA housing standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... promulgated by the Occupational Safety and Health Administration, at 29 CFR 1910.142. Except as provided in... Migrant Workers Housing Safety and Health § 500.132 Applicable Federal standards: ETA and OSHA housing... Occupational Safety and Health Act. (2) A person who owns or controls a facility or real property to be used...

29 CFR 500.132 - Applicable Federal standards: ETA and OSHA housing standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... promulgated by the Occupational Safety and Health Administration, at 29 CFR 1910.142. Except as provided in... Migrant Workers Housing Safety and Health § 500.132 Applicable Federal standards: ETA and OSHA housing... Occupational Safety and Health Act. (2) A person who owns or controls a facility or real property to be used...

Cumulative index to NASA Tech Briefs, 1970-1975. [bibliographies

NASA Technical Reports Server (NTRS)

1979-01-01

Tech briefs of technology derived from the research and development activities of the National Aeronautics and Space Administration are presented. Abstracts and indexes of subject, personal author, originating center, and tech brief number for the 1970-1975 tech briefs are presented.

Strategy for Coordinated EPA/Occupational Safety and Health Administration (OSHA) Implementation of the Chemical Accident Prevention Requirements of the Clean Air Act Amendments of 1990

EPA Pesticide Factsheets

EPA and the Occupational Safety and Health Administration (OSHA) share responsibility for prevention: OSHA has the Process Safety Management Standard to protect workers, and EPA the Risk Management Program to protect the general public and environment.

Promoting Tech Schools within Your Community

ERIC Educational Resources Information Center

Nikirk, Martin

2010-01-01

This article describes a number of promotional events and practices that the author's school engages in. The author hopes that his school's experiences will serve as an inspiration and useful model for other "Tech Directions" readers. There are many methods for successfully promoting one's tech program. Two key strategies are: (1) Connect in…

Can Trains Really Float?

ERIC Educational Resources Information Center

McCartney, Robin Ward; Deroche, Sarah; Pontiff, Danielle

2008-01-01

Have you ever heard of a Maglev train? Who would be crazy enough to think that exploring how a high-tech train little known in the United States works with a group of fourth-grade students would yield understandings about the properties of magnetism, force and motion, and inquiry science? Fortunately, the authors--a college methods professor and…

An analysis of OSHA inspections assessing contaminant exposures in general medical and surgical hospitals.

PubMed

Knight, Jordan L; Sleeth, Darrah K; Larson, Rodney R; Pahler, Leon F

2013-04-01

This study analyzed data from the Occupational Safety and Health Administration's (OSHA) Chemical Exposure Health Database to assess contaminant exposures in general medical and surgical hospitals. Seventy-five inspections conducted in these hospitals from 2005 through 2009 were identified. Five categories of inspections were conducted, the three most common being complaint-based, planned, and referral-based inspections. Complaint-based inspections comprised the majority of inspections-55 (73%) of the 75 conducted. The overall violation rate for all inspection types was 68%. This finding was compared to the violation rates of planned inspections (100%), referral-based inspections (83%), and complaint-based inspections (62%). Asbestos was the hazardous substance most commonly sampled and cited by OSHA in hospitals, with 127 samples collected during 24 inspections; 31% of the total 75 inspections resulting in one or more violations were due to asbestos. Copyright 2013, SLACK Incorporated.

Occupational injury and illness recording and reporting requirements. Occupational Safety and Health Administration (OSHA), U.S. Department of Labor. Final rule.

PubMed

2001-01-19

The Occupational Safety and Health Administration (OSHA) is revising its rule addressing the recording and reporting of occupational injuries and illnesses (29 CFR parts 1904 and 1952), including the forms employers use to record those injuries and illnesses. The revisions to the final rule will produce more useful injury and illness records, collect better information about the incidence of occupational injuries and illnesses on a national basis, promote improved employee awareness and involvement in the recording and reporting of job-related injuries and illnesses, simplify the injury and illness recordkeeping system for employers, and permit increased use of computers and telecommunications technology for OSHA recordkeeping purposes. This rulemaking completes a larger overall effort to revise Part 1904 of Title 29 of the Code of Federal Regulations. Two sections of Part 1904 have already been revised in earlier rulemakings. A rule titled Reporting fatalities and multiple hospitalization incidents to OSHA, became effective May 2, 1994 and has been incorporated into this final rule as Section 1904.39. A second rule entitled Annual OSHA injury and illness survey of ten or more employers became effective on March 13, 1997 and has been incorporated into this final rule as Section 1904.41. The final rule being published today also revises 29 CFR 1952.4, Injury and Illness Recording and Reporting Requirements, which prescribes the recordkeeping and reporting requirements for States that have an occupational safety and health program approved by OSHA under Section 18 of the Occupational Safety and Health Act (the "Act" or "OSH Act").

NASA Tech House: An early evaluation

NASA Technical Reports Server (NTRS)

1977-01-01

An architect-engineering firm, as well as university participants, performed system studies, evaluated construction methods, performed cost effectiveness studies, and prepared construction drawings which incorporated the selected technology features into a final design. A Technology Utilization House (Tech House) based on this design was constructed at the NASA Langley Research Center in Hampton, Virginia. The Tech House is instrumented so that the performance of the design features and energy systems can be evaluated during a planned family live-in period. As such, the house is both a demonstration unit and a research laboratory. The Tech House is to demonstrate the kind of single-family residence that will probably be available within the next five years.

OSHA safety requirements for hazardous chemicals in the workplace.

PubMed

Dohms, J

1992-01-01

This article outlines the Occupational Safety and Health Administration (OSHA) requirements set forth by the Hazard Communication Standard, which has been in effect for the healthcare industry since 1987. Administrators who have not taken concrete steps to address employee health and safety issues relating to hazardous chemicals are encouraged to do so to avoid the potential of large fines for cited violations. While some states administer their own occupational safety and health programs, they must adopt standards and enforce requirements that are at least as effective as federal requirements.

Tech-Prep Competency Profiles within the Engineering Technologies Cluster.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 12 competency profiles for tech prep courses within the engineering technologies cluster. The document consists of the following sections: (1) systemic curriculum reform philosophy--Ohio's vision of tech prep and its six critical components; (2) an explanation of the process of developing the tech prep competencies; (3) a…

Wide-Bandgap MOSFET Research with Virginia Tech Graduate Students |

Science.gov Websites

Advanced Manufacturing Research | NREL Wide Bandgap MOSFET Research with Virginia Tech Wide -Bandgap MOSFET Research with Virginia Tech Graduate Students Along with graduate student fellows from Virginia Tech, NREL is researching aspects related to the reliability and prognostics of power electronic

75 FR 77798 - Interpretation of OSHA's Provisions for Feasible Administrative or Engineering Controls of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-14

... CFR Parts 1910 and 1926 Interpretation of OSHA's Provisions for Feasible Administrative or Engineering... Administrative or Engineering Controls of Occupational Noise, giving interested parties 60 days to comment. The... Provisions for Feasible Administrative or Engineering Controls of Occupational Noise. The notice proposed to...

NASA tech brief evaluations

NASA Technical Reports Server (NTRS)

Workman, Gary L.

1994-01-01

A major step in transferring technology is to disseminate information about new developments to the appropriate sector(s). A useful vehicle for transferring technology from the government sector to industry has been demonstrated with the use of periodical and journal announcements to highlight technological achievements which may meet the needs of industries other than the one who developed the innovation. To meet this end, NASA has very successfully pursued the goal of identifying technical innovations through the national circulation publication; NASA Tech Briefs. At one time the Technology Utilization Offices of the various centers coordinated the selection of appropriate technologies through a common channel. In recent years, each NASA field center has undertaken the task of evaluating submittals for Tech Brief publication independently of the others. The University of Alabama in Huntsville was selected to assist MSFC in evaluating technology developed under the various programs managed by the NASA center for publication in the NASA Tech Briefs journal. The primary motivation for the NASA Tech Briefs publication is to bring to the attention of industry the various NASA technologies which, in general, have been developed for a specific aerospace requirement, but has application in other areas. Since there are a number of applications outside of NASA that can benefit from innovative concepts developed within the MSPC programs, the ability to transfer technology to other sectors is very high. In most cases, the innovator(s) are not always knowledgeable about other industries which might potentially benefit from their innovation. The evaluation process can therefore contribute to the list of potential users through a knowledgeable evaluator.

NASA Tech Briefs Index 1978. Volume 3, Nos. 1-4

NASA Technical Reports Server (NTRS)

1978-01-01

Tech Briefs are short announcements of new technology derived from the research and development activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This Index to NASA Tech Briefs contains abstracts and four indexes -- subject, personal author, originating Center, and Tech Brief number -- for 1978 Tech Briefs.

NASA Tech Briefs Index 1979. Volume 4, Nos. 1-4

NASA Technical Reports Server (NTRS)

1980-01-01

Tech Briefs are short announcements of new technology derived from the research and development activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This Index to NASA Tech Briefs contains abstracts and four indexes -- subject, personal author, originating Center, and Tech Brief number -- for 1979 Tech Briefs.

NASA Tech Briefs Index 1980. Volume 5, Nos. 1-4

NASA Technical Reports Server (NTRS)

1981-01-01

Tech Briefs are short announcements of new technology derived from the research and development activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This Index to NASA Tech Briefs contains abstracts and four indexes -- subject,. personal author, originating Center, and Tech Brief number -- for 1980 Tech Briefs.

Tech Prep SCANS Lesson Development. Region 10 Tech Prep.

ERIC Educational Resources Information Center

Region 10 Tech Prep Consortium, Bloomington, IN.

This document contains 50 applications-based lessons developed during the 1993-94 school year as part of the Indiana Region 10 Tech Prep Project. The lessons were developed by 91 secondary and postsecondary educators and are modeled around the SCANS (Secretary's Commission on Achieving Necessary Skills) competencies. The applications-based lessons…

The effect of the OSHA lead exposure in construction standard on blood lead levels among iron workers employed in bridge rehabilitation.

PubMed

Levin, S M; Goldberg, M; Doucette, J T

1997-03-01

Over 50,000 workers are at risk of occupational exposure to lead in the course of renovating the nation's deteriorating infrastructure. In mid-1993, to control exposure to lead in the construction setting OSHA promulgated a Lead in Construction Standard. In this study, we assessed the effect of the mandated changes in exposure conditions which followed the introduction of this new standard. We analyzed changes in baseline and maximum blood lead concentrations and in maximum increments in blood lead levels before and after introduction of the standard among iron workers employed in the renovation of a large, lead-painted, steel bridge in New York City. Results indicated that baseline and maximum blood lead levels fell significantly after the implementation of the provisions of the standard, as did maximum increments in blood lead concentrations. Seventy-six percent of the workers maintained blood lead concentrations below 20 micrograms/dl after the OSHA standard, as compared with 66% prior to its implementation. Increments of 20 micrograms/dl or more occurred considerably more frequently before introduction of the standard (13% before vs. 4% after; p = 0.01). Evidence of decreased exposure to lead was observed among iron workers who were present both before and after the introduction of the OSHA standard, as well as among iron workers newly hired after the OSHA provisions were put in place. These findings document the effectiveness of the OSHA construction lead standard in controlling exposure to lead in this complex and variable environment. The data indicate the utility of blood lead determinations in assessing the outcome of industrial hygiene interventions to reduce exposures to lead in the construction setting.

Tech Prep Marketing Guide. The Complete Book of Strategies and Practical Experiences.

ERIC Educational Resources Information Center

Williamson, Patty

This guide explains the concept of marketing tech prep and provides marketing principles and strategies to promote tech prep programs. The guide covers the following topics: (1) why it is necessary to market tech prep; (2) what a comprehensive tech prep marketing plan should include; (3) targeting the benefits message; (4) marketing tech prep to…

Tech-Prep in New York State: Profiles of Four Diverse Programs.

ERIC Educational Resources Information Center

Frenkel, Michael W.; Brodsky, Stanley M.

These case studies highlight the diversity of four tech programs that responded with a unique set of organizational policies and procedures to a unique set of challenges. The case study on City Tech Tech-Prep Consortium in Brooklyn focuses on three strategies: transition to City Tech program, postsecondary component, and program evaluation. The…

Project Georgia High School/High Tech

NASA Technical Reports Server (NTRS)

2000-01-01

Georgia High School/High Tech has been developing a suggested curriculum for use in its programs. The purpose of this instructional material is to provide a basic curriculum format for teachers of High School/High Tech students. The curriculum is designed to implement QCC classroom instruction that encourages career development in technological fields through post-secondary education, paid summer internships, and exposure to experiences in high technology.

Health Technologies State Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This "tech prep" state competency profile contains all the competencies required and recommended for entry-level employees in occupations in the health technologies cluster. Introductory materials include the following: descriptions of the different types of competencies (essential ones that must be included in all new tech prep programs…

Contextual Learning and Tech Prep Curriculum Integration.

ERIC Educational Resources Information Center

Edling, Walter

Because tech prep has the twin goals of preparing students for entry into postsecondary/continuing education or the work force after high school, tech prep programs require significant modification of conventional curricula and teaching methodologies. Both research and experience have demonstrated that the ability to transfer learning from one…

Combining Technology and Narrative in a Learning Environment for Workplace Training.

ERIC Educational Resources Information Center

Nelson, Wayne A.; Wellings, Paula; Palumbo, David; Gupton, Christine

In a project designed to provide training for entry-level job skills in high tech industries, a combination of narrative and technology was employed to aid learners in developing the necessary soft skills (dependability, responsibility, listening comprehension, collaboration, et cetera) sought by employers. The EnterTech Project brought together a…

78 FR 59725 - Construction Fall Protection Systems Criteria and Practices, and Training Requirements; Extension...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-27

...- 1648. Mail, hand delivery, express mail, messenger, or courier service: When using this method, you... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0008] Construction Fall Protection Systems Criteria and Practices, and Training Requirements; Extension of the Office...

Lead exposure in a tank demolition crew: implications for the new OSHA construction lead standard.

PubMed

Waller, K; Osorio, A M; Jones, J

1994-11-01

The Federal Occupational Safety and Health Administration (OSHA) has recently extended the basic health and safety provisions of the OSHA lead standard for general industry to workers in the construction industry. In this report we describe a tank demolition worksite that midway through the project strengthened its lead exposure control activities to a level that approximated the current lead standard. Of 12 tested ironworkers and laborers who worked at the site before the change, zinc protoporphyrin levels increased and seven developed blood lead levels (BLL) > 50 micrograms/dL. After the change these workers' BLLs declined. Six workers hired after the change did not experience increases in zinc protoporphyrin and none developed BLL > 25 micrograms/dL. The experience at this worksite demonstrates the usefulness and feasibility of implementing the current lead standard in construction settings.

Toward healthy prisons: the TECH model and its applications.

PubMed

Ross, Michael W; Jo Harzke, Amy

2012-01-01

This paper aims to explore how the TECH Model (testing for and treating infectious diseases and vaccination; environmental modification to prevent disease transmission; chronic disease identification and treatment; and health maintenance and education) can be used for assessing and achieving healthy prisons. This paper explores the concepts of "health in prison" and "healthy prisons" in the context of recent research and guidance. The paper then considers the TECH Model as an approach to achieving healthy prisons. Under each of the four TECH Model domains are tasks to achieve a healthy prison. For prisons with poor or no resources, each domain contains steps that will improve prison health and move towards a healthy prison for both prisoners and staff. Implementation can thus be "low-TECH" or "high-TECH" depending on the setting and the available resources and the model is specifically designed to provide options for resource-poor as well as resource-rich correctional settings. The TECH Model is a first step in characterizing the components of a healthy prison and the processes to achieve this. This Model could be implemented in all levels of prisons internationally.

Minimizing Security Vulnerabilities in High-Tech Classrooms

ERIC Educational Resources Information Center

Ozkan, Betul C.; Gunay, Vedat

2004-01-01

Emerging technologies are quickly becoming part of daily learning and teaching endeavors in academia. Due to the access to certain high-tech tools educators must learn how to integrate these tools in educational settings. However, many also encounter problems and weaknesses in the same high-tech environment that uses and delivers information…

Research on the competitiveness of high-tech industries in northeast China

NASA Astrophysics Data System (ADS)

Liu, Lei; Wang, Yang; Wang, Ming-Quan; Xiao, Yan-Bo; Gao, Ming

2017-06-01

Based on characteristics of high-tech industry in Northeast China, high-tech industry competitiveness index system was developed, and the competitiveness of high-tech industry was evaluated through principal component analysis and location quotient method. The results showed that the scale of high-tech industry in Northeast China as a whole was small, and presented a decreasing trend for the proportion in the country. The competitiveness of high-tech industry in Northeast China lagged far behind that of the eastern and central regions. The high-tech industry competitiveness of Liaoning, Jilin and Heilongjiang provinces in China ranked 15, 19 and 21, respectively. The manufacture of medicine in Jilin province, and the manufacture of aircraft and spacecraft and the related equipment in Liaoning and Heilongjiang provinces had high competitive advantage, but the manufacture of electronic equipment and communication equipment and the manufacture of computers and office equipment was lack of competitiveness. The development suggestions were put forward to improve the competitiveness of high-tech industries in Northeast China.

Skill Acquisition in "High Tech" Export Agriculture: A Case Study of Lifelong Learning in Peru's Asparagus Industry

ERIC Educational Resources Information Center

Carnoy, Martin; Luschei, Thomas F.

2008-01-01

As one of the world's largest exporters of asparagus, Peru has developed a high-tech system of asparagus production, processing and delivery that requires well-trained and responsive workers. In this study we examine the role of both private and public sectors in preparing workers for the asparagus industry and the implications of this skill…

Nevada State plan; final approval determination. Occupational Safety and Health Administration (OSHA), U.S. Department of Labor. Final State plan approval--Nevada.

PubMed

2000-04-18

This document amends OSHA's regulations to reflect the Assistant Secretary's decision granting final approval to the Nevada State plan. As a result of this affirmative determination under section 18(e) of the Occupational Safety and Health Act of 1970, Federal OSHA's standards and enforcement authority no longer apply to occupational safety and health issues covered by the Nevada plan, and authority for Federal concurrent jurisdiction is relinquished. Federal enforcement jurisdiction is retained over any private sector maritime employment, private sector employers on Indian land, and any contractors or subcontractors on any Federal establishment where the land is exclusive Federal jurisdiction. Federal jurisdiction remains in effect with respect to Federal government employers and employees. Federal OSHA will also retain authority for coverage of the United States Postal Service (USPS), including USPS employees, contract employees, and contractor-operated facilities engaged in USPS mail operations.

TechTrends 2010-2015: A Content Analysis

ERIC Educational Resources Information Center

Stauffer, Eric

2017-01-01

This study is a content analysis of articles published within the journal "TechTrends" from 2000 to 2015. The study reveals that the publication "TechTrends" has increased the overall number of peer reviewed original papers over the last 6 years. The author describes the proportion of these original papers per volume and…

LanzaTech- Capturing Carbon. Fueling Growth.

ScienceCinema

NONE

2018-01-16

LanzaTech will design a gas fermentation system that will significantly improve the rate at which methane gas is delivered to a biocatalyst. Current gas fermentation processes are not cost effective compared to other gas-to-liquid technologies because they are too slow for large-scale production. If successful, LanzaTech's system will process large amounts of methane at a high rate, reducing the energy inputs and costs associated with methane conversion.

75 FR 21663 - Maysteel, LLC Including On-Site Leased Workers From Staff One, Badger Tech, Boyd Hunter, Seek...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,483] Maysteel, LLC Including On-Site Leased Workers From Staff One, Badger Tech, Boyd Hunter, Seek, QPS, and Service First, Menomonee Falls, WI; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with Section 223 of the Trade Act...

76 FR 68243 - Youth Leadership Program: TechGirls

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-03

... DEPARTMENT OF STATE [Public Notice: 7671] Youth Leadership Program: TechGirls Overview Information Bureau of Educational and Cultural Affairs (ECA) Request for Grant Proposals: Youth Leadership Program... Cultural Affairs (ECA) announces an open competition for the new Youth Leadership Program ``TechGirls...

EcoCAR Challenge Profile: Virginia Tech

ScienceCinema

Gantt, Lynn

2017-12-27

Since childhood, Lynn Gantt has had a deep seeded passion for cars and the mechanics that drive them. The Virginia native spent his weekends rebuilding antique tractors with his dad to race at tractor pulls across the state, and now the Virginia Tech graduate student is the proud team co-leader of Virginia Tech's EcoCAR Challenge team -- the winners of the three-year long competition, as announced last night at an awards ceremony in Washington, D.C.

High Tech, Low Tech and Education. Sociology of the School.

ERIC Educational Resources Information Center

Watkins, Peter

Designed to provide a link between academic thought and research and the practice of teaching, this monograph explores the appropriate educational response to technological change. The central argument of this study is that future job opportunities will lie essentially with low tech jobs, i.e., traditional, basic, industrial jobs, rather than the…

The Texas Tech Prep Consortia: Strategies for Advancing Academic and Technical Education.

ERIC Educational Resources Information Center

Hensley, Oliver D., Ed.; And Others

This book contains 30 chapters on the tech prep initiative in Texas: "The Identity of Tech Prep in Texas" (Tunstall); "A Snap-Shot of the Impact of the Tech Prep Initiative in the Governor's 24 Planning Regions" (Brown); "The Tech Prep Consortium Directors: The Architects for the Future of Texas" (Hensley et al.);…

Tech Gets Physical

ERIC Educational Resources Information Center

Ravage, Barbara

2011-01-01

As colleges push for increased efficiencies, facilities departments nationwide are turning more and more to high-tech approaches. Nowhere has this trend been more visible than in the realm of energy consumption, where managers hope to extract significant cost savings. Technology is helping facilities managers achieve significant efficiencies,…

Cumulative Index to NASA Tech Briefs

NASA Technical Reports Server (NTRS)

1969-01-01

Tech Briefs are short announcements of new technology derived from the R&D activities of the National Aeronautics and Space Administration. This Index to NASA Tech Briefs lists the technological innovations derived from the U.S. space program and published during the period January through December 1968. A new five year cycle of cumulative indexes begins with this index. The main section is arranged in six categories: Electrical (Electronic); Physical Sciences (Energy Sources); Materials (Chemistry); Life Sciences; Mechanical; and Computer Programs.

Impact of OSHA final rule--recording hearing loss: an analysis of an industrial audiometric dataset.

PubMed

Rabinowitz, Peter M; Slade, Martin; Dixon-Ernst, Christine; Sircar, Kanta; Cullen, Mark

2003-12-01

The 2003 Occupational Safety and Health Administration (OSHA) Occupational Injury and Illness Recording and Reporting Final Rule changed the definition of recordable work-related hearing loss. We performed a study of the Alcoa Inc. audiometric database to evaluate the impact of this new rule. The 2003 rule increased the rate of potentially recordable hearing loss events from 0.2% to 1.6% per year. A total of 68.6% of potentially recordable cases had American Academy of Audiology/American Medical Association (AAO/AMA) hearing impairment at the time of recordability. On average, recordable loss occurred after onset of impairment, whereas the non-age-corrected 10-dB standard threshold shift (STS) usually preceded impairment. The OSHA Final Rule will significantly increase recordable cases of occupational hearing loss. The new case definition is usually accompanied by AAO/AMA hearing impairment. Other, more sensitive metrics should therefore be used for early detection and prevention of hearing loss.

Ten years after: is it time to revisit the 1994 OSHA indoor air quality rule?

PubMed

Ahrens, David

2011-01-01

Approximately 20 million nonsmoking workers are employed in workplaces without restrictions on smoking and are potentially exposed to secondhand smoke--a Class A carcinogen. These workers are largely in the service industry, in southern and western states and in non-urban areas. The Occupational Safety and Health Administration's (OSHA's) 1994 proposal for smoke-free workplaces (withdrawn in 2001) was attacked by many interest groups that may no longer oppose this protection. Federal regulation for smoke-free workplaces is needed for workers, who are not protected by state and local smoke-free laws. This policy could save thousands of lives each year, and prevent significant illness. Twenty-one states have "state plans" that would allow more protective laws. Of the 29 states under OSHA, 11 have comprehensive smoke-free statutes. Changes in the policy environment and in institutions such as unions, restaurant associations, and the tobacco industry since 2001 may improve the prospects for federal action and reduce disparities that currently characterize exposure to secondhand smoke.

Impact of OSHA Final Rule—Recording Hearing Loss: An Analysis of an Industrial Audiometric Dataset

PubMed Central

Rabinowitz, Peter M.; Slade, Martin; Dixon-Ernst, Christine; Sircar, Kanta; Cullen, Mark

2013-01-01

The 2003 Occupational Safety and Health Administration (OSHA) Occupational Injury and Illness Recording and Reporting Final Rule changed the definition of recordable work-related hearing loss. We performed a study of the Alcoa Inc. audiometric database to evaluate the impact of this new rule. The 2003 rule increased the rate of potentially recordable hearing loss events from 0.2% to 1.6% per year. A total of 68.6% of potentially recordable cases had American Academy of Audiology/American Medical Association (AAO/AMA) hearing impairment at the time of recordability. On average, recordable loss occurred after onset of impairment, whereas the non-age-corrected 10-dB standard threshold shift (STS) usually preceded impairment. The OSHA Final Rule will significantly increase recordable cases of occupational hearing loss. The new case definition is usually accompanied by AAO/AMA hearing impairment. Other, more sensitive metrics should therefore be used for early detection and prevention of hearing loss. PMID:14665813

U.S. Secretary of Labor Robert Reich urges Senate lawmakers to undertake OSHA reform.

PubMed

Reich, R

1994-07-01

Congress is considering reform of the 25-year-old Occupational Safety and Health (OSH) Act. Earlier this year, U.S. Secretary of Labor Robert Reich expressed his support of the Senate's OSHA reform bill (S. 575) in a statement before the Senate's Committee on Labor and Human Resources. Here is part of what he said.

NASA Tech Briefs, December 2000. Volume 24, No. 12

NASA Technical Reports Server (NTRS)

2000-01-01

Topics include: special coverage sections on Imaging/Video/Display Technology, and sections on electronic components and systems, test and measurement, software, information sciences, and special sections of Electronics Tech Briefs and Motion Control Tech Briefs.

NASA Tech Briefs, October 2001. Volume 25, No. 10

NASA Technical Reports Server (NTRS)

2001-01-01

Topics include: special coverage section on composites and plastics, electronic components and systems, software, mechanics, physical sciences, information sciences, book and reports, and a special sections of Photonics Tech Briefs and Motion Control Tech Briefs.

NASA Tech Briefs, February 2002. Volume 26, No. 2

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include:a technology focus on computers, electronic components and systems, software, materials, mechanics,physical sciences machinery, manufacturing/fabrication, mathematics, book and reports, motion control tech briefs and a special section on Photonics Tech Briefs.

Displacement in new economy labor markets: Post-displacement wage loss in high tech versus low tech cities.

PubMed

Davis, Daniel J; Rubin, Beth A

2016-11-01

While scholars and politicians tout education as the salve to employment disruptions, we argue that the geography of the new economy, and the social closure mechanisms that geography creates, may be just as important as individuals' characteristics for predicting post-displacement wage loss (or gain). We use data from the 2012 Displaced Workers ement of the Current Population Survey and from the 2010 United States Census to test hypotheses linking local labor markets in different industrial contexts to post-displacement wage loss. Our results point to age as a closure mechanism, and to the partially protective effect of education in high-tech versus low-tech economic sectors. This study is the first to use national level data to examine how employment in high-tech cities influences post-displacement wages. These findings are relevant both for theorizing about the new economy and for public policy. Copyright © 2016 Elsevier Inc. All rights reserved.

NASA Tech Briefs, April 1999. Volume 23, No. 4

NASA Technical Reports Server (NTRS)

1999-01-01

Topics include: special coverage sections on automotive technology, and CAM and sections on electronic components and systems, software, materials, machinery/automation, physical sciences, and a special section of Electronic Tech Briefs and Motion Control Tech Briefs.

NASA Tech Briefs, September 1998. Volume 22, No. 9

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage on data acquisition, also, electronic components and circuits, electronic systems, software, materials, mechanics, machinery/automation, physical sciences, information sciences, This issue contains a special sections of Electronics Tech Briefs and Motion Control Tech Briefs.

New evidence on the health hazards and control of metalworking fluids since completion of the OSHA advisory committee report.

PubMed

Mirer, Franklin E

2010-08-01

Metalworking fluids (MWF) are used in the manufacture of engines, transmissions, chassis parts and other products. In 2003, OSHA denied a union petition to promulgate a standard for MWF. The 3rd Circuit Court of Appeals rejected a union lawsuit to compel OSHA to regulate MWF. OSHA relied exclusively on the 1999 Metal Working Fluids Standards Advisory Committee report, therefore, only evidence available before 1999 was quoted supporting the denial. This review was conducted to identify studies published since 1998. Electronic reference sources were queried for the terms for metalworking fluids, machining fluids, cutting fluids, cutting oils, coolants, machining, and machinist. All items returned were reviewed for relevance to MWF regulation. The review noted 227 reports in the peer reviewed literature directly relevant to regulation of MWF exposures. Of these, 26 addressed cancer; 58 respiratory effects; 32 skin effects or absorption; 45 microbial contaminants; and 76 exposure measurements and controls. Three major studies identified excess cancer including lung, liver, pancreatic, laryngeal, and leukemia associated with MWF exposures. Reports strengthened associations of asthma and hypersensitivity pneumonitis with recent exposure to MWF. Material new evidence demonstrates significant risks to material impairment of health at prevailing exposure levels and feasibility of lower exposure limits. Copyright 2010 Wiley-Liss, Inc.

AVA Guide to Federal Funding for Tech Prep.

ERIC Educational Resources Information Center

Brustein, Michael

This handbook outlines the options and requirements for federal support for tech prep in the Perkins law. It explains what educators must do and not do to assure compliance with all the law's mandates and to avoid audit exceptions. The guide also covers new tech prep provisions that were included in the Higher Education Act of 1992. Discussed in…

NASA Tech Briefs, November 1998. Volume 22, No. 11

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage sections on test and measurement and sections on electronic components and circuits, electronic systems, software, materials, mechanics, machinery/automation, physical sciences, information sciences, book and reports, and special sections of Electronics Tech Briefs amd Rapid Product Development Tech Briefs.

Incorporating Six Sigma Methodology Training into Chemical Engineering Education

ERIC Educational Resources Information Center

Dai, Lenore L.

2007-01-01

Six Sigma is a buzz term in today's technology and business world and there has been increasing interest to initiate Six Sigma training in college education. We have successfully incorporated Six Sigma methodology training into a traditional chemical engineering course, Engineering Experimentation, at Texas Tech University. The students have…

NASA Tech Briefs, May 1999. Volume 23, No. 5

NASA Technical Reports Server (NTRS)

1999-01-01

Topics include: special coverage sections on sensors and composites and plastics, and sections on electronic components and systems, software, materials, mechanics, machinery and automation, bio-medical, physical sciences, book and reports, and a special section of Photonics Tech Briefs and Rapid Product Development Tech Briefs.

NASA Tech Briefs, October 1999. Volume 23, No. 10

NASA Technical Reports Server (NTRS)

1999-01-01

Topics include: special coverage section on data acquisition and sensors and sections on electronic components and systems, software, materials, mechanics, machinery/automation, manufacturing/fabrication, bio-medical, physical sciences, information sciences, book and reports, and special section of Electronics Tech Briefs and Motion Control Tech briefs

NASA Tech Briefs, April 1995. Volume 19, No. 4

NASA Technical Reports Server (NTRS)

1995-01-01

This issue of the NASA Tech Briefs has a special focus section on video and imaging, a feature on the NASA invention of the year, and a resource report on the Dryden Flight Research Center. The issue also contains articles on electronic components and circuits, electronic systems, physical sciences, materials, computer programs, mechanics, machinery, manufacturing/fabrication, mathematics and information sciences and life sciences. In addition to the standard articles in the NASA Tech brief, this contains a supplement entitled "Laser Tech Briefs" which features an article on the National Ignition Facility, and other articles on the use of Lasers.

TechNovation Lecture Series

NASA Image and Video Library

2011-02-17

Karim R. Lakhani, assistant professor at Harvard Business School, kicked off the Office of the Chief Technologist TechNovation Lecture series with his talk "Accessing the Ideas Cloud" on Thursday, Feb. 17, 2011 at NASA Headquarters in Washington. Photo Credit: (NASA/Carla Cioffi)

NASA Tech Briefs, June 1998. Volume 22, No. 6

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage on computer hardware and peripherals, electronic components and circuits, electronic systems, software, materials, mechanics, machinery/automation, manufacturing, physical sciences, information sciences, book and reports, and a special section of Photonics Tech Briefs. and a second special section of Motion Control Tech Briefs

NASA Tech Briefs, December 1998. Volume 22, No. 12

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage section on design and analysis software, and sections on electronic components and circuits, electronic systems, software, materials, mechanics, machinery/automation, manufacturing/fabrication, physical sciences, and special sections of Photonics Tech Briefs, Motion Control Tech briefs and a Hot Technology File 1999 Resource Guide.

NASA Tech Briefs, October 2000. Volume 24, No. 10

NASA Technical Reports Server (NTRS)

2000-01-01

Topics include: special coverage sections on CAD, CAE, and PDM, and, Composites and Plastics, and sections on electronic components and systems, software, test and measurement, mechanics, manufacturing/fabrication, physical sciences, information sciences, book and reports, and special sections of Electronics Tech Briefs and Motion Control Tech Briefs

Tech Prep Early Childhood Professions Advanced Specialty Curriculum Guide for Postsecondary Colleges. Part of an Articulated Program for Secondary & Postsecondary Students.

ERIC Educational Resources Information Center

Harriman, Marilyn Williams

The Tech Prep Early Childhood Professions Program is designed to provide high school and community college students in Texas with the necessary training and skills to find employment in the child care and education professions as teachers, directors, or special needs paraprofessionals. This Advanced Speciality Curriculum Guide is designed for…

Fire Extinguisher Training for Fire Watch and Designated Workers, Course 9893

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Jimmy D.

At Los Alamos National Laboratory (LANL), all workers must be aware of LANL fire protection policies and be trained on what to do in the event of a fire. This course, Fire Extinguisher Training for Fire Watch and Designated Workers (#9893), provides awareness-level and hands-on training for fire watch personnel and designated workers. Fire watch personnel and designated workers are appointed by line management and must receive both awareness-level training and hands-on training in the use of portable fire extinguishers to extinguish an incipient-stage fire. This training meets the requirements of the Occupational Safety and Health Administration (OSHA) Code ofmore » Federal Regulations (CFR) 29 CFR 1910.157, Portable Fire Extinguishers, and Procedure (P) 101-26, Welding, Cutting, and Other Spark-/Flame-Producing Operations.« less

Considering High-Tech Exhibits?

ERIC Educational Resources Information Center

Routman, Emily

1994-01-01

Discusses a variety of high-tech exhibit media used in The Living World, an educational facility operated by The Saint Louis Zoo. Considers the strengths and weaknesses of holograms, video, animatronics, video-equipped microscopes, and computer interactives. Computer interactives are treated with special attention. (LZ)

OSHA medical and workplace surveillance requirements and NIOSH recommendations (for employees exposed to toxic substances and other work hazards)

NASA Technical Reports Server (NTRS)

Cooper, L. P.

1983-01-01

Both OSHA medical and work place surveillance requirements and NIOSH recommendations were prepared as a desk reference to help occupational health professionals to perform their duties. The medical surveillance information focuses on frequency of physical examinations, specific problems that may arise as a result of exposure (e.g., decreased immunocompetence, weight loss, ets.), conditions that intensify the harmful effects of exposure (e.g., medication an exposed employee may be taking, cigarette smoking, etc.), the areas that should be scrutinized in medical and work histories and during the physical exam, and specific clinical tests that should be conducted. Recordkeeping requirements are also specified. The workplace surveillance information consists of monitoring requirements, personal protective equipment requirements, and recordkeeping requirements. Such details as the sampling devices that should be used, the type of respirators that should be worn, and the frequency of inspections are included. This document does not specify the training, labeling and posting, and safe work practice requirements and recommendations due to space considerations.

High-Tech Security Help.

ERIC Educational Resources Information Center

Flanigan, Robin L.

2000-01-01

Advocates embrace high-tech security measures as necessary to avoid Columbine-style massacres. Critics contend that school systems can go overboard, making students feel less safe and too closely scrutinized. Current electronic, biometric, and computer-mapping devices and school applications are discussed. Vendors are listed. (MLH)

A Survey of Perceptions of the Virginia Tech Tragedy

ERIC Educational Resources Information Center

Fallahi, Carolyn R.; Austad, Carol Shaw; Fallon, Marianne; Leishman, Lisa

2009-01-01

The recent shootings at the Virginia Polytechnic Institute (Virginia Tech) shocked the nation and brought violence on college campuses to the forefront of the nation's attention. We surveyed college students and faculty/staff three weeks after the incident about their perceptions of the Virginia Tech shooting, subsequent media exposure, and school…

Tech-Prep Competency Profiles within the Business/Computer Technologies.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for educators throughout Ohio who are involved in planning and/or delivering tech prep programs within the business/computer technologies cluster, discusses and presents tech prep competency profiles (TCPs) for 12 business/computer technology occupations. The first part of the document contains the following:…

Supersonics Project - Airport Noise Tech Challenge

NASA Technical Reports Server (NTRS)

Bridges, James

2010-01-01

The Airport Noise Tech Challenge research effort under the Supersonics Project is reviewed. While the goal of "Improved supersonic jet noise models validated on innovative nozzle concepts" remains the same, the success of the research effort has caused the thrust of the research to be modified going forward in time. The main activities from FY06-10 focused on development and validation of jet noise prediction codes. This required innovative diagnostic techniques to be developed and deployed, extensive jet noise and flow databases to be created, and computational tools to be developed and validated. Furthermore, in FY09-10 systems studies commissioned by the Supersonics Project showed that viable supersonic aircraft were within reach using variable cycle engine architectures if exhaust nozzle technology could provide 3-5dB of suppression. The Project then began to focus on integrating the technologies being developed in its Tech Challenge areas to bring about successful system designs. Consequently, the Airport Noise Tech Challenge area has shifted efforts from developing jet noise prediction codes to using them to develop low-noise nozzle concepts for integration into supersonic aircraft. The new plan of research is briefly presented by technology and timelines.

Selected Outcomes Related to Tech Prep Implementation by Illinois Consortia, 2001-2005

ERIC Educational Resources Information Center

Bragg, Debra D.; Kirby, Catherine; Zhu, Rongchun

2006-01-01

This report is the summary of key aspects of Tech Prep in Illinois over the five year period of 2001-2005 during which all Tech Prep consortia provided annual data based on federal legislative requirements and state-determined essential elements of successful programs. These annual Tech Prep reports enable local educators to monitor student…

Evaluation of a model training program for respiratory-protection preparedness at local health departments.

PubMed

Alfano-Sobsey, Edie; Kennedy, Bobby; Beck, Frank; Combs, Brian; Kady, Wendy; Ramsey, Steven; Stockweather, Allison; Service, Will

2006-04-01

Respiratory-protection programs have had limited application in local health departments and have mostly focused on protecting employees against exposure to tuberculosis (TB). The need to provide the public health workforce with effective respiratory protection has, however, been underscored by recent concerns about emerging infectious diseases, bioterrorism attacks, drug-resistant microbes, and environmental exposures to microbial allergens (as in recent hurricane flood waters). Furthermore, OSHA has revoked the TB standard traditionally followed by local health departments, replacing it with a more stringent regulation. The additional OSHA requirements may place increased burdens on health departments with limited resources and time. For these reasons, the North Carolina Office of Public Health Preparedness and Response and industrial hygienists of the Public Health Regional Surveillance Teams have developed a training program to facilitate implementation of respiratory protection programs at local health departments. To date, more than 1,400 North Carolina health department employees have been properly fit-tested for respirator use and have received training in all aspects of respiratory protection. This article gives an overview of the development and evaluation of the program. The training approach presented here can serve as a model that other health departments and organizations can use in implementing similar respiratory-protection programs.

TECH-NJ, 2000-2002.

ERIC Educational Resources Information Center

Dell, Amy G., Ed.

2002-01-01

These three issues of "TECH-NJ" from 2000 to 2002 focus on technology and children with disabilities in New Jersey. The issues address how technology can support language development and people with learning disabilities, and technology tools that support reading. Featured articles include: (1) "Adaptive Technology Center for New…

The Influence and Outcomes of High School to College Transition Policy (Tech Prep) for Career and Technical Education Students in Massachusetts

ERIC Educational Resources Information Center

Shaw, Christine

2012-01-01

Over the past two decades, the role of career and technical education has shifted from one preparing students directly for employment, to one that offers vocational training as well as college preparatory academics. To support this effort, the federal government enacted the "Tech Prep Act" Title II under the larger "1990 Carl D.…

SciTech Clubs for Girls. [Annual] technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nogal, A.M.

1993-02-01

Since January 1992, 9 exhibits have been constructed by the SciTech Clubs for Girls, which involved 63 girls, ages 10 to 14. These exhibits are: Bubble Shapes by the St. Charles Cadette Girl Scout Troop No. 109. Density Games by the South Elgin Cadette Girl Scout Troop No. 132. Electric Fleas by the Warrenville Junior Girl Scout Troop No. 305. Energy vs. Power by the Aurora Junior Girl Scout Troop No. 242. The Organ Pipe by the Bartlett Junior Girl Scout Troop No. 107. Ohm`s Law by the Geneva Junior Girl Scout Troop No. 401. What is Gravity by themore » Pilsen YMCA girls. Insulation at Work by the Algonquin Junior Girl Scout Troop No. 303. Series vs. Parallel by the Leland Junior Girl Scout Troop No. 50. The report is a description of each exhibit and the group that built the exhibit. Each group had a minimum of 10 hours of contact time at SciTech with the SciTech Clubs for Girls Program Coordinator. All mentors are female. Each exhibit building experience includes a trip to the hardware store to purchase supplies. After the exhibit is complete, the girls receive certificates of achievement and a SciTech Club Patch.« less

The Debreather and NuTech: A Reply to Kleespies

ERIC Educational Resources Information Center

Ogden, Russel D.

2010-01-01

This article responds to Phillip Kleespies's (2010/this issue) commentary on NuTech fieldworkers and their use of the debreather. Non-medical assistance with suicide raises legitimate concerns about accountability, public safety, and care for those who are suffering. Given that suicide is not a crime, an outcome of the NuTech movement may be that…

Cal Tech's Program in Meteorology: 1933-1948.

NASA Astrophysics Data System (ADS)

Lewis, J. M.

1994-01-01

The California Institute of Technology (Cal Tech) established a course of study in meteorology in 1933. It was intimately tied to the upsurge of activity in commercial and military aviation that occurred in the period between the world wars. The tragic crash of the airship U.S.S. Akron provided the stimulus for including meteorology as a subprogram in the aeronautics department at Cal Tech. Thoodore von K´rm´n, head of the department and director of the school's Guggenheim Aeronautics Laboratory, masterminded the design of the program and geared it toward the solution of practical problems using the principles of dynamic meteorology. One of his doctoral students, Irving Krick, was groomed to develop the program.Robert Millikan, head of the institute, fostered an approach to science that encouraged the faculty to consuit and work with industry. In this environment, Krick established links with aviation, motion picture studios, and public utilities that would set the stage for the research thrust in meteorology. The program was primarily designed for training at the master' degree level, and a significant number of the graduates became entrepreneurs in meteorology. Based on letters of reminiscence and oral histories from some of these consulting meteorologists, it has been concluded that the Millikan/von K´rm´n philosophy of science played an important part in directing the meteorologists into the private sector.Following World War II, Lee DuBridge replaced Millikan as head of the institute. DuBridge's efforts were directed toward making the small elite school scientifically competitive in the changed conditions of a postwar world. In this climate, the merging of private business with academic work fell into disfavor. Without champions such as Millikan and von K´rm´n,the meteorology program was unable to survive.

Hydropower application of confined space regulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franseen, H.W.

1995-12-31

OSHA`s {open_quotes}Permit Required Confined Space{close_quotes} rules, 1910.146, became effective April 15, 1993. Their rules define a {open_quotes}confined space{close_quotes} and {open_quotes}permit required confined space{close_quotes}; provide general requirements for those entering the confined space, for the attendant and entry supervisor; define what a confined space program and permit system should be; and describe training requirements and rescue considerations. Tapoco Inc., began preparing confined space procedures in 1992 using Alcoa Engineering Standards and OSHA`s proposed rules. A joint union management team was formed, and this team began evaluating spaces which meet the confined space definition. In 1993, employees were trained, and all entriesmore » into spaces were done according to Alcoa`s and OSHA`s proposed rules. Rescue teams have been trained at each site. Some unique confined spaces and or unique entry conditions have been encountered which have required extensive evaluation.« less

Access to high-tech health care. Ethics.

PubMed

Merrill, J M

1991-03-15

Access to health care has always been limited by personal and social economics. Poverty remains one element that correlates with poor prognosis in all varieties of cancer. Prior to becoming standard therapy, elements of high-tech health care are often widely available as research protocols, participation in which is generally available without considerations of insurance coverage or personal wealth. Any person may still volunteer participation in research protocols and thereby partake in high-tech advances even before these become standard therapy. However, recent developments in the conduct of research now may limit participation. Medicare and third party insurance payers proscribe payment for research project care and always have. Recently, more than ever before, reimbursements to physicians and health care institutions have been more closely scrutinized to reject all payment in research settings. In situations in which cost and availability of the new technology, whether machine or drug, limit participation, research entrepreneurs have made research participation available to only those who can pay for it. These and similar developments threaten to limit access to high-tech health care and to actually impede cancer research.

Tech Prep Implementation in the United States: The Once and Future Role of Community Colleges.

ERIC Educational Resources Information Center

Bragg, Debra D.; Layton, James D.

1995-01-01

Describes a study examining the impact of the Tech Prep Education Act on the initial implementation of federally supported Tech Prep Initiatives. Based on telephone survey responses from all 50 state Tech Prep leaders, reviews findings concerning the funding of Tech Prep consortia, state and local administrative structures, policies and goals, and…

34 CFR 406.1 - What is the State-Administered Tech-Prep Education Program?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false What is the State-Administered Tech-Prep Education... (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE-ADMINISTERED TECH-PREP EDUCATION PROGRAM General § 406.1 What is the State-Administered Tech-Prep Education Program? If the annual...

Ten Top Tech Trends

ERIC Educational Resources Information Center

McLester, Susan

2008-01-01

In this article, the author discusses the major technical issues, products, and practices of the day. The top ten tech trends are listed and discussed. These include: (1) data mining; (2) cyberbullying; (3) 21st century skills; (4) digital content; (5) learning at leisure; (6) personal responders; (7) mobile tools; (8) bandwidth; (9) open-source…

Biodegradation of tech-hexachlorocyclohexane in a upflow anaerobic sludge blanket (UASB) reactor.

PubMed

Bhat, Praveena; Kumar, M Suresh; Mudliar, Sandeep N; Chakrabarti, T

2006-04-01

Biodegradability of technical grade hexachlorocyclohexane (tech-HCH) was studied in an upflow anaerobic sludge blanket reactor (UASB) under continuous mode of operation in concentration range of 100-200 mg/l and constant HRT of 48 h. At steady state operation more than 85% removal of tech-HCH (upto 175 mg/l concentration) and complete disappearance of beta-HCH was observed. Kinetic constants in terms of maximum specific tech-HCH utilization rate (k) and half saturation velocity constant (K(L)) were found to be 11.88 mg/g/day and 8.11 mg/g/day, respectively. The tech-HCH degrading seed preparation, UASB reactor startup and degradation in continuous mode of operation of the reactor is presented in this paper.

Introduction to Vocations. High Tech Focus. Final Report 1984-85.

ERIC Educational Resources Information Center

Wayne Township Schools, NJ.

This report contains the materials that were developed during a project to make middle-grade students more aware of high tech careers through the following activities: (1) teacher and student visitations of community sites to explore high tech careers in 15 occupational clusters; (2) exploratory activities to facilitate linkages and articulation…

Cumulative Index to NASA Tech Briefs 1963-1969

NASA Technical Reports Server (NTRS)

1970-01-01

Tech Briefs are short announcements of new technology derived from the research and development activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This Cumulative index to NASA Tech Briefs lists those published from 1963 through 1969. The main listing is divided into six categokies: Electrical (Electronic), Physical Sciences (Energy Sources), Materials (Chemistry), Life Sciences, Mechanical, and Computer Programs.

Delivery of high-tech home care by hospital-based nursing units in Quebec: clinical and technical challenges.

PubMed

Lehoux, Pascale; Richard, L; Pineault, R; Saint-Arnaud, J

2006-03-01

The role that hospital-based nurses should play in the delivery of high-tech home care, and how they should be supported in that role, are topics that remain understudied. Our research objective was to document how hospital-based nursing teams perceive and deal with the clinical and technical challenges associated with the provision of high-tech home care. Four home care interventions were selected: antibiotic intravenous therapy, parenteral nutrition, peritoneal dialysis and oxygen therapy. A self-administered survey was sent to all hospital-based units providing these interventions in the province of Quebec, Canada (n = 154; response rate: 70.8%). We used descriptive statistical analyses to derive mean values for scores on either a five- or a six-level Likert scale. Despite variation across the four interventions, our results indicate that while nursing teams believe these interventions increase patients' autonomy, they also recognize that they generate anxiety and impose constraints on patients' lives. Nurses must increase efforts to deal with both clinical and technical challenges and help patients overcome the barriers to appropriate use of home care technologies. While nursing teams generally perceive high-tech home care as beneficial, they still experience significant technical and clinical challenges. Some of these challenges could be addressed by strengthening professional training initiatives, while others require broader home care policy interventions.

77 FR 24992 - OSHA Strategic Partnership Program for Worker Safety and Health (OSPP); Extension of the Office...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-26

... Strategic Partnership Program for Worker Safety and Health (OSPP); Extension of the Office of Management and... specified in the OSHAs Strategic Partnership Program for Worker Safety and Health (OSPP). DATES: Comments... accepted during the Department of Labor's and Docket Office's normal business hours, 8:15 a.m. to 4:45 p.m...

Virginia Tech Researchers Study Effects of Shootings on Their Campus

ERIC Educational Resources Information Center

Gravois, John

2008-01-01

This article reports how researchers at Virginia Tech, working in a variety of disciplines, are studying the long-term effects of the campus killings 10 months ago. After the killings, administrators at Virginia Tech realized that their normal institutional-review process for research proposals was not sufficient to deal with the likely onslaught…

A Virginia Tech MFT Ethics Class Reflects on the Shootings at Virginia Tech

ERIC Educational Resources Information Center

Piercy, Fred; Banker, Jamie; Traylor, Ryan; Krug, Sarah; Castanos, Carolina; Cole, Elise; Ciafardini, Anthony J.; Jordal, Christian; Rodgers, Brandon; Stewart, Shelley; Goodwin, Annabelle

2008-01-01

The authors of this article include the professor and most of the students in a doctoral course on marriage and family therapy ethical and professional issues that met the semester that a disturbed student shot and killed 32 Virginia Tech students and faculty before killing himself. In this article, we reflect through short essays on issues…

High Tech Educators Network Evaluation.

ERIC Educational Resources Information Center

O'Shea, Dan

A process evaluation was conducted to assess the High Tech Educators Network's (HTEN's) activities. Four basic components to the evaluation approach were documentation review, program logic model, written survey, and participant interviews. The model mapped the basic goals and objectives, assumptions, activities, outcome expectations, and…

Virginia Tech Weighs Hundreds of Recommendations and Acts on Some

ERIC Educational Resources Information Center

Fischer, Karin

2008-01-01

Three reports on last April's shootings left Virginia Tech under a mountain of recommendations--roughly 400 in all. So far the university has dealt with some of the most significant ones. Virginia Tech established an emergency-notification system, created a team to assess at-risk students and employees, and hired additional police officers and…

Training Course for Compliance Safety and Health Officers. Final Report.

ERIC Educational Resources Information Center

McKnight, A. James; And Others

The report describes revision of the Compliance Safety and Health Officers (CSHO) course for the Department of Labor, Occupational Safety and Health Administration (OSHA). The CSHO's job was analyzed in depth, in accord with OSHA standards, policies, and procedures. A listing of over 1,700 violations of OSHA standards was prepared, and specialists…

29 CFR 1960.67 - Federal agency certification of the injury and illness annual summary (OSHA 300-A or equivalent).

Code of Federal Regulations, 2011 CFR

2011-07-01

... annual summary (OSHA 300-A or equivalent). 1960.67 Section 1960.67 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Recordkeeping and...

29 CFR 1960.67 - Federal agency certification of the injury and illness annual summary (OSHA 300-A or equivalent).

Code of Federal Regulations, 2010 CFR

2010-07-01

... annual summary (OSHA 300-A or equivalent). 1960.67 Section 1960.67 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Recordkeeping and...

Get on Board the Cost Effective Way: A Tech Prep Replication Process.

ERIC Educational Resources Information Center

Moore, Wayne A.; Szul, Linda F.; Rivosecchi, Karen

1997-01-01

The Northwestern Pennsylvania Tech Prep Consortium model for replicating tech prep programs includes these steps: fact finding, local industry analysis, curriculum development, detailed description, marketing strategies, implementation, and program evaluation. (SK)

77 FR 74224 - OSHA Data Initiative (ODI); Extension of the Office of Management and Budget's (OMB) Approval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

... Schmidt, Office of Statistical Analysis, Occupational Safety and Health Administration, U.S. Department of... 1904. These data will allow OSHA to calculate occupational injury and illness rates and to focus its... and dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some...

Horticulture. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Wooster. Agricultural Technical Inst.

This tech prep competency profile (TCP), which was developed by a consortium of Ohio educators and business/industry representatives, lists the competencies that have been identified as necessary for employment in the following occupations: nursery technician; golf course superintendent; landscape designer/manager; lawn care specialist; tree care…

Virginia Water Resources Research Center - at Virginia Tech since 1965

Science.gov Websites

Virginia Water Resources Research Center at Virginia Tech since 1965 Search for: Search Skip to collaborative research, extension, and education programs to develop solutions to water resource challenges. We Monitoring Council Conference: March 21, 2018 The Virginia Water Resources Research Center at Virginia Tech

Cumulative index to NASA Tech Briefs, 1986-1990, volumes 10-14

NASA Technical Reports Server (NTRS)

1992-01-01

Tech Briefs are short announcements of new technology derived from the R&D activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This cumulative index of Tech Briefs contains abstracts and four indexes (subject, personal author, originating center, and Tech Brief number) and covers the period 1986 to 1990. The abstract section is organized by the following subject categories: electronic components and circuits, electronic systems, physical sciences, materials, computer programs, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

A Virginia Tech MFT ethics class reflects on the shootings at Virginia Tech.

PubMed

Piercy, Fred; Banker, Jamie; Traylor, Ryan; Krug, Sarah; Castanos, Carolina; Cole, Elise; Ciafardini, Anthony J; Jordal, Christian; Rodgers, Brandon; Stewart, Shelley; Goodwin, Annabelle

2008-04-01

The authors of this article include the professor and most of the students in a doctoral course on marriage and family therapy ethical and professional issues that met the semester that a disturbed student shot and killed 32 Virginia Tech students and faculty before killing himself. In this article, we reflect through short essays on issues related to the tragedy, ethics, and recovery.

Occupational amputations in Illinois 2000-2007: BLS vs. data linkage of trauma registry, hospital discharge, workers compensation databases and OSHA citations.

PubMed

Friedman, Lee; Krupczak, Colin; Brandt-Rauf, Sherry; Forst, Linda

2013-05-01

Workplace amputation is a widespread, disabling, costly, and preventable public health problem. Thousands of occupational amputations occur each year, clustering in particular economic sectors, workplaces, and demographic groups such as young workers, Hispanics, and immigrants. To identify and describe work related amputations amongst Illinois residents that occur within Illinois as reported in three legally mandated State databases; to compare these cases with those identified through the BLS-Survey of Occupational Illnesses and Injuries (SOII); and to determine the extent of direct intervention by the Occupational Safety and Health Administration (OSHA) for these injuries in the State. We linked cases across three databases in Illinois - trauma registry, hospital discharge, and workers compensation claims. We describe amputation injuries in Illinois between 2000 and 2007, compare them to the BLS-SOII, and determine OSHA investigations of the companies where amputations occurred. There were 3984 amputations identified, 80% fingertips, in the Illinois databases compared to an estimated 3637, 94% fingertips, from BLS-SOII. Though the overall agreement is close, there were wide fluctuations (over- and under-estimations) in individual years between counts in the linked dataset and federal survey estimates. No OSHA inspections occurred for these injuries. Increased detection of workplace amputations is essential to targeting interventions and to evaluating program effectiveness. There should be mandatory reporting of all amputation injuries by employers and insurance companies within 24h of the event, and every injury should be investigated by OSHA. Health care providers should recognise amputation as a public health emergency and should be compelled to report. There should be a more comprehensive occupational injury surveillance system in the US that enhances the BLS-SOII through linkage with state databases. Addition of industry, occupation, and work

Review of the OSHA-NIOSH Response to the Deepwater Horizon Oil Spill: Protecting the Health and Safety of Cleanup Workers.

PubMed

Michaels, David; Howard, John

2012-07-18

The fire and explosion of the Deepwater Horizon oil rig resulted in an enormous oil spill that threatened large distances of coastline. The overall response was led by the United States Coast Guard and involved the oil company BP, federal agencies, and state and local governments of five states. The Occupational Safety and Health Administration and the National Institute for Occupational Safety and Health focused extensive resources on ensuring that BP and its contractors provided safe working conditions for thousands of workers involved in the response. Federal personnel visited worksites daily, identifying hazards and means of abatement; assessed training programs to ensure that workers were adequately trained in languages they could understand; monitored chemical exposures and determined that the proper personal protective equipment was deployed; insisted on implementation of a heat mitigation program; rostered thousands of workers; and conducted extensive outreach in communities impacted by the spill. Advance planning, immediate deployment, and collaboration across agencies helped ensure that the response operations resulted in no worker fatalities, and relatively few injuries and illnesses. For future responses, improvements should be made in how safety and health information, as well as the process behind safety and health decisions, are communicated to the public. Michaels D, Howard J. Review of the OSHA-NIOSH Response to the Deepwater Horizon Oil Spill: Protecting the Health and Safety of Cleanup Workers. PLoS Currents Disasters. 2012 Jul 18.

The Tech Prep Handbook: Essential Documents To Promte Effective Tech Prep Policies and Practices.

ERIC Educational Resources Information Center

Hensley, Oliver D., Ed.; And Others

Developed during a project to document and analyze the tech prep initiative in Texas, this handbook contains exemplary documents associated with the model programs in the state. This second edition of the handbook organizes documents in sections (sections A, C, D, and G) that correspond to the major impact sectors identified during the research…

Virginia Tech Was Slow to Respond to Gunman, Panel Finds

ERIC Educational Resources Information Center

Fischer, Karin; Wilson, Robin

2007-01-01

This article reports on the findings of the state panel on the Virginia Tech massacre. A state panel that investigated last spring's massacre at Virginia Tech has issued a harshly worded report that says the university erred in the way it handled a mentally disabled student who became a killer and in how it dealt with the immediate aftermath of…

Ending the Tech Refresh Nightmare

ERIC Educational Resources Information Center

Demski, Jennifer

2010-01-01

As higher education budgets tighten in the ongoing recession, colleges and universities have found themselves questioning, lengthening, and even eliminating tech refresh cycles. Yet how deep an institution cuts into its refresh program can compromise its ability to provide an up-to-date and competitive computing environment for students and a…

Pesticide safety training and access to field sanitation among migrant farmworker mothers from Starr County, Texas.

PubMed

Shipp, E M; Cooper, S P; Burau, K D; Bolin, J N

2005-02-01

Very little published research describes employer compliance with EPA-mandated Worker Protection Standard (WPS) pesticide safety training and the OSHA Field Sanitation Standard among farmworker women in general and mothers specifically. A goal of both standards is limiting farmworkers' exposure to potentially hazardous agricultural pesticides. Data from a NIOSH-supported cohort study ("Injury and Illness Surveillance in Migrant Farmworker Families") allowed for examining these issues. The cohort included 267 migrant farmworker families who usually reside along the Texas-Mexico border (Starr County, Texas). Data were collected in Starr County during in-home interviews. Of 102 mothers who participated in migrant farm work during summer 2001, 57 (55.9%) reported having ever received training/instruction in the safe use of pesticides, while 47 (46.1%) reported having received training within the previous five years, as required by WPS. Of trained mothers, 91.5% to 93.6% reported that their training covered key WPS areas: (1) entry into a recently treated field, (2) pesticide related injuries/illnesses, and (3) where to go and who to contact for emergency care following exposure. Regarding access to field sanitation, 67.5% to 84.2% of 77 mothers who worked outside Texas reported employer-provided decontamination supplies (e.g., soap, wash water, towels, and toilet facilities). However, a strikingly smaller proportion (12% to 28%) of 25 mothers who worked within Texas reported access to the same resources, suggesting discrepancies in compliance across the U.S. Due to the low level of employer compliance with both WPS and OSHA mandated standards, increased enforcement and an alternate delivery of pesticide training is recommended.

Building 21st Century Schools: Designing Smarter, Sleeker High-Tech Facilities.

ERIC Educational Resources Information Center

Cutshall, Sandy

2003-01-01

The demand for high-tech programs in tandem with traditional classes challenges school districts to provide flexible facilities for career and technical education. Some districts partner with local businesses to develop state-of-the art facilities and deal with costs, upkeep, and upgrading. Some high-tech educational facilities are themselves…

Minnesota's Tech Prep Outcome Evaluation Model.

ERIC Educational Resources Information Center

Brown, James M.; Pucel, David; Twohig, Cathy; Semler, Steve; Kuchinke, K. Peter

1998-01-01

Describes the Minnesota Tech Prep Consortia Evaluation System, which collects outcomes data on enrollment, retention, related job placement, higher education, dropouts, and diplomas/degrees awarded. Explains outcome measures, database development, data collection and analysis methods, and remaining challenges. (SK)

Evaluating and Improving Tech Prep: Development, Validation, and Results of the Minnesota Self-Assessment Model.

ERIC Educational Resources Information Center

Pucel, David J.; And Others

1996-01-01

The Minnesota Tech Prep Self-Evaluation System is a framework based on ideas from Deming, Juran, and the Baldridge award. Testing with 17 Minnesota tech prep consortia found it effective in identifying areas needing improvement and promoting dialog among those involved in tech prep implementation. (SK)

Teaching Health and Safety: Preparing Staff for the Unexpected.

ERIC Educational Resources Information Center

Cronin, Greg

1999-01-01

Discusses methods for training camp counselors in safety standards. Safety awareness and camp wellness should be introduced during staff interviews. During precamp training, staff should complete a test in OSHA requirements, followed by role playing to expand staff's knowledge in each OSHA safety and health area. First aid training, fire safety,…

29 CFR 1960.67 - Federal agency certification of the injury and illness annual summary (OSHA 300-A or equivalent).

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Federal agency certification of the injury and illness... Reporting Requirements § 1960.67 Federal agency certification of the injury and illness annual summary (OSHA... for certification of Federal agency injury and illness records in this section is necessary because...

29 CFR 1960.67 - Federal agency certification of the injury and illness annual summary (OSHA 300-A or equivalent).

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Federal agency certification of the injury and illness... Reporting Requirements § 1960.67 Federal agency certification of the injury and illness annual summary (OSHA... for certification of Federal agency injury and illness records in this section is necessary because...

29 CFR 1960.67 - Federal agency certification of the injury and illness annual summary (OSHA 300-A or equivalent).

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Federal agency certification of the injury and illness... Reporting Requirements § 1960.67 Federal agency certification of the injury and illness annual summary (OSHA... for certification of Federal agency injury and illness records in this section is necessary because...

The role of OSHA violations in serious workplace accidents.

PubMed

Mendeloff, J

1984-05-01

California accident investigations for 1976 show that violations of the Occupational Safety and Health Administration's safety standards were a contributing factor in 13% to 19% of the 645 deaths reported to the workers' compensation program during that year. However, a panel of safety engineers judged that only about 50% of these violations could have been detected if an inspector had visited the day before the accident. These findings indicate that the potential gains from stronger enforcement of current standards are limited but not insignificant. The likelihood that a violation contributed to a serious accident varied considerably among accident types, industries, and size classes of plants. These findings can be used to increase the efficiency and effectiveness of the OSHA program by means of better targeting of inspections and accident investigations, more intelligent assessment of which violations should be penalized most heavily, and the provision of information to employers and workers about which violations are most consequential.

Workplace Violence Training Programs for Health Care Workers: An Analysis of Program Elements.

PubMed

Arbury, Sheila; Hodgson, Michael; Zankowski, Donna; Lipscomb, Jane

2017-06-01

Commercial workplace violence (WPV) prevention training programs differ in their approach to violence prevention and the content they present. This study reviews 12 such programs using criteria developed from training topics in the Occupational Safety and Health Administration's (OSHA) Guidelines for Preventing Workplace Violence for Healthcare and Social Service Workers and a review of the WPV literature. None of the training programs addressed all the review criteria. The most significant gap in content was the lack of attention to facility-specific risk assessment and policies. To fill this gap, health care facilities should supplement purchased training programs with specific training in organizational policies and procedures, emergency action plans, communication, facility risk assessment, and employee post-incident debriefing and monitoring. Critical to success is a dedicated program manager who understands risk assessment, facility clinical operations, and program management and evaluation.

Proceedings of Denver GeoTech '92

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, C.A.

1992-01-01

This book contains proceedings of Denver Geo Tech '92. Topics covered include: practical ways to use microcomputers and workstations in geology, geophysics, environmental concerns, petroleum engineering, mining, hydrogeology, reclamation, microcomputers, state-of-the-art information on computer hardware, software, and services.

Development of High-Tech Skills.

ERIC Educational Resources Information Center

Theuerkauf, Walter E.

High tech systems not only generate new structures in the production process, but also involve profound changes in job organization, which in turn imply that job qualifications must be modified. In view of the changes within engineering systems and the relevant technologies, it seems expedient to choose a curricular approach based on the concepts…

77 FR 26588 - In the Matter of Recycle Tech, Inc.; Order of Suspension of Trading

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] In the Matter of Recycle Tech, Inc.; Order of Suspension of Trading May 2, 2012. It appears to the Securities and Exchange Commission that there is a lack of current and accurate information concerning the securities of Recycle Tech, Inc. (``Recycle Tech...

Managers’ Perceptions of the Value and Impact of HAZWOPER Worker Health and Safety Training

PubMed Central

Riley, Kevin; Slatin, Craig; Rice, Carol; Rosen, Mitchel; Weidner, B. Louise; Fleishman, Jane; Alerding, Linda; Delp, Linda

2018-01-01

Background Worker training is a core component of the OSHA Hazardous Waste Operations and Emergency Response (HAZWOPER) standard, but few studies have considered what motivates managers to provide HAZWOPER training to employees or what they value in that training. Methods In 2012, four university-based programs conducted an exploratory survey of managers who sent employees to HAZWOPER courses. Results from 109 respondents were analyzed. Results Forty-two percent of respondents cited regulations as the most important reason to provide HAZWOPER training; many indicated they would provide less training if there were no standard in place. Three-quarters (74%) reported training had improved workplace conditions. Fewer than half said they were likely to involve trained employees in aspects of the organization’s H&S program. Discussion Compliance with regulatory requirements is an important factor shaping managers’ training delivery decisions. Managers recognize positive impacts of training. These impacts could be enhanced by further leveraging employee H&S knowledge and skills. PMID:26010141

Managers' perceptions of the value and impact of HAZWOPER worker health and safety training.

PubMed

Riley, Kevin; Slatin, Craig; Rice, Carol; Rosen, Mitchel; Weidner, B Louise; Fleishman, Jane; Alerding, Linda; Delp, Linda

2015-07-01

Worker training is a core component of the OSHA Hazardous Waste Operations and Emergency Response (HAZWOPER) standard, but few studies have considered what motivates managers to provide HAZWOPER training to employees or what they value in that training. In 2012, four university-based programs conducted an exploratory survey of managers who sent employees to HAZWOPER courses. Results from 109 respondents were analyzed. Forty-two percent of respondents cited regulations as the most important reason to provide HAZWOPER training; many indicated they would provide less training if there were no standard in place. Three-quarters (74%) reported training had improved workplace conditions. Fewer than half said they were likely to involve trained employees in aspects of the organization's H&S program. Compliance with regulatory requirements is an important factor shaping managers' training delivery decisions. Managers recognize positive impacts of training. These impacts could be enhanced by further leveraging employee H&S knowledge and skills. © 2015 Wiley Periodicals, Inc.

Mapping sound intensities by seating position in a university concert band: A risk of hearing loss, temporary threshold shifts, and comparisons with standards of OSHA and NIOSH

NASA Astrophysics Data System (ADS)

Holland, Nicholas Vedder, III

Exposure to loud sounds is one of the leading causes of hearing loss in the United States. The purpose of the current research was to measure the sound pressure levels generated within a university concert band and determine if those levels exceeded permissible sound limits for exposure according to criteria set by the Occupational Safety and Health Administration (OSHA) and the National Institute of Occupational Safety and Health (NIOSH). Time-weighted averages (TWA) were obtained via a dosimeter during six rehearsals for nine members of the ensemble (plus the conductor), who were seated in frontal proximity to "instruments of power" (trumpets, trombones, and percussion; (Backus, 1977). Subjects received audiometer tests prior to and after each rehearsal to determine any temporary threshold shifts (TTS). Single sample t tests were calculated to compare TWA means and the maximum sound intensity exposures set by OSHA and NIOSH. Correlations were calculated between TWAs and TTSs, as well as TTSs and the number of semesters subjects reported being seated in proximity to instruments of power. The TWA-OSHA mean of 90.2 dBA was not significantly greater than the specified OSHA maximum standard of 90.0 dBA (p > .05). The TWA-NIOSH mean of 93.1 dBA was, however, significantly greater than the NIOSH specified maximum standard of 85.0 dBA (p < .05). The correlation between TWAs and TTSs was considered weak (r = .21 for OSHA, r = .20 for NIOSH); the correlation between TTSs and semesters of proximity to instruments of power was also considered weak (r = .13). TWAs cumulatively exceeded both association's sound exposure limits at 11 specified locations (nine subjects and both ears of the conductor) throughout the concert band's rehearsals. In addition, hearing acuity, as determined by TTSs, was substantially affected negatively by the intensities produced in the concert band. The researcher concluded that conductors, as well as their performers, must be aware of possible

Peace at Virginia Tech; A LEAP to Promote the Liberal Arts

ERIC Educational Resources Information Center

Wilson, Robin; Wasley, Paula

2008-01-01

This article reports that a Virginia Tech professor whose wife was among 32 people killed by a student gunman last year will become director of the university's new Center for Peace Studies and Violence Prevention. Jerzy Nowak will give up his job as chairman of Tech's horticulture department to take the new post on July 1. His wife, Jocelyne…

Statistical Modeling of Occupational Exposure to Polycyclic Aromatic Hydrocarbons Using OSHA Data.

PubMed

Lee, Derrick G; Lavoué, Jérôme; Spinelli, John J; Burstyn, Igor

2015-01-01

Polycyclic aromatic hydrocarbons (PAHs) are a group of pollutants with multiple variants classified as carcinogenic. The Occupational Safety and Health Administration (OSHA) provided access to two PAH exposure databanks of United States workplace compliance testing data collected between 1979 and 2010. Mixed-effects logistic models were used to predict the exceedance fraction (EF), i.e., the probability of exceeding OSHA's Permissible Exposure Limit (PEL = 0.2 mg/m3) for PAHs based on industry and occupation. Measurements of coal tar pitch volatiles were used as a surrogate for PAHs. Time, databank, occupation, and industry were included as fixed-effects while an identifier for the compliance inspection number was included as a random effect. Analyses involved 2,509 full-shift personal measurements. Results showed that the majority of industries had an estimated EF < 0.5, although several industries, including Standardized Industry Classification codes 1623 (Water, Sewer, Pipeline, and Communication and Powerline Construction), 1711 (Plumbing, Heating, and Air-Conditioning), 2824 (Manmade Organic Fibres), 3496 (Misc. Fabricated Wire products), and 5812 (Eating Places), and Major group's 13 (Oil and Gas Extraction) and 30 (Rubber and Miscellaneous Plastic Products), were estimated to have more than an 80% likelihood of exceeding the PEL. There was an inverse temporal trend of exceeding the PEL, with lower risk in most recent years, albeit not statistically significant. Similar results were shown when incorporating occupation, but varied depending on the occupation as the majority of industries predicted at the administrative level, e.g., managers, had an estimated EF < 0.5 while at the minimally skilled/laborer level there was a substantial increase in the estimated EF. These statistical models allow the prediction of PAH exposure risk through individual occupational histories and will be used to create a job-exposure matrix for use in a population-based case

Capturing the real value in high-tech acquisitions.

PubMed

Chaudhuri, S; Tabrizi, B

1999-01-01

Eager to stay ahead of fast-changing markets, more and more high-tech companies are going outside for competitive advantage. Last year in the United States alone, there were 5,000 high-tech acquisitions, but many of them yielded disappointing results. The reason, the authors contend, is that most managers have a shortsighted view of strategic acquisitions--they focus on the specific products or market share. That focus might make sense in some industries, where those assets can confer substantial advantages, but in high tech, full-fledged technological capabilities--tied to skilled people--are the key to long-term success. Instead of simply following the "buzz," successful acquires systematically assess their own capability needs. They create product road maps to identify holes in their product line. While the business group determines if it can do the work in-house, the business development office scouts for opportunities to buy it. Once business development locates a candidate, it conducts an expanded due diligence, which goes beyond strategic, financial, and legal checks. Successful acquires are focused on long-term capabilities, so they make sure that the target's products reflect a real expertise. They also look to see if key people would be comfortable in the new environment and if they have incentives to stay on board. The final stage of a successful acquisition focuses on retaining the new people--making sure their transition goes smoothly and their energies stay focused. Acquisitions can cause great uncertainty, and skilled people can always go elsewhere. In short, the authors argue, high-tech acquisitions need a new orientation around people, not products.

The Virginia Tech Library System (VTLS).

ERIC Educational Resources Information Center

McGrath, Deborah Hall; Lee, Carl R.

1989-01-01

Discusses topics relating to the Virginia Tech Library System: the company (VTLS, Inc.); the software; data structure; cataloging, status, and authority control; circulation; serials control and acquisitions; the online catalog; management reporting; networking; and the operating environment. Sidebars discuss the Vanilla Network; LINNEA--a network…

A web-based tree crown condition training and evaluation tool for urban and community forestry

Treesearch

Matthew F. Winn; Neil A. Clark; Philip A. Araman; Sang-Mook Lee

2007-01-01

Training personnel for natural resource related field work can be a costly and time-consuming process. For that reason, web-based training is considered by many to be a more attractive alternative to on-site training. The U.S. Forest Service Southern Research Station unit with Virginia Tech cooperators in Blacksburg, Va., are in the process of constructing a web site...

Develop applications based on android: Teacher Engagement Control of Health (TECH)

NASA Astrophysics Data System (ADS)

Sasmoko; Manalu, S. R.; Widhoyoko, S. A.; Indrianti, Y.; Suparto

2018-03-01

Physical and psychological condition of teachers is very important because it helped determine the realization of a positive school climate and productive so that they can run their profession optimally. This research is an advanced research on the design of ITEI application that able to see the profile of teacher’s engagement in Indonesia and to optimize the condition is needed an application that can detect the health of teachers both physically and psychologically. The research method used is the neuroresearch method combined with the development of IT system design for TECH which includes server design, database and android TECH application display. The study yielded 1) mental health benchmarks, 2) physical health benchmarks, and 3) the design of Android Application for Teacher Engagement Control of Health (TECH).

Review of the OSHA-NIOSH Response to the Deepwater Horizon Oil Spill: Protecting the Health and Safety of Cleanup Workers

PubMed Central

Michaels, David; Howard, John

2012-01-01

Introduction: The fire and explosion of the Deepwater Horizon oil rig resulted in an enormous oil spill that threatened large distances of coastline. The overall response was led by the United States Coast Guard and involved the oil company BP, federal agencies, and state and local governments of five states. Methods: The Occupational Safety and Health Administration and the National Institute for Occupational Safety and Health focused extensive resources on ensuring that BP and its contractors provided safe working conditions for thousands of workers involved in the response. Federal personnel visited worksites daily, identifying hazards and means of abatement; assessed training programs to ensure that workers were adequately trained in languages they could understand; monitored chemical exposures and determined that the proper personal protective equipment was deployed; insisted on implementation of a heat mitigation program; rostered thousands of workers; and conducted extensive outreach in communities impacted by the spill. Results: Advance planning, immediate deployment, and collaboration across agencies helped ensure that the response operations resulted in no worker fatalities, and relatively few injuries and illnesses. Conclusions: For future responses, improvements should be made in how safety and health information, as well as the process behind safety and health decisions, are communicated to the public. Citation: Michaels D, Howard J. Review of the OSHA-NIOSH Response to the Deepwater Horizon Oil Spill: Protecting the Health and Safety of Cleanup Workers. PLoS Currents Disasters. 2012 Jul 18 PMID:24678440

A study of the atmosphere in London underground trains before and after the ban on smoking.

PubMed

Proctor, C

1987-01-01

Measurements of the ambient atmosphere in London Underground train compartments were made before and after a ban on smoking. Levels of nicotine and carbon monoxide and estimates of airborne particulates are given. This paper describes the analytical techniques used in measuring constituents of tobacco smoke in the ambient air of public environments. Levels observed were all found to be far lower than recommended OSHA limits for safe exposure.

How To Implement a Tech Prep Program Based on the Rhode Island Model. Tech Prep Associate Degree Program. Technical Programs. Business/Office Administration Programs. Allied Health/Dental Health Programs.

ERIC Educational Resources Information Center

Community Coll. of Rhode Island, Warwick.

This implementation guide contains information based on experiences that occurred during the development and implementation of the Rhode Island Tech Prep Model. It is intended to assist educators in addressing challenges and obstacles faced by the program early in the planning process. It begins with a rationale for tech prep. Rhode Island…

Impact of the Siena College Tech Valley Scholars Program on Student Outcomes

ERIC Educational Resources Information Center

Medsker, Larry; Allard, Lee; Tucker, Lucas J.; O'Donnell, Jodi L.; Sterne-Marr, Rachel; Bannon, Jon; Finn, Rose; Weatherwax, Allan

2016-01-01

The Tech Valley Scholars (TVS) program included 38 students who joined this program over the course of three academic years, from 2009 to 2012. These students comprise the experimental group for this study to determine if participating in the NSF-funded Tech Valley Scholars program improved academic outcomes. The experimental group was compared to…

Electronics Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile covers the occupation of electronics technician. Section 1 provides the occupation definition. Section 2 lists development committee members. Section 3 provides the leveling codes--abbreviations for grade level, (by the end of grade 12, by the end of associate degree), academic codes (communications, math, or…

78 FR 14359 - Verizon Business Networks Services, Inc., Specialist-Tech Customer Service, Philadelphia, PA...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

... Business Networks Services, Inc., Specialist-Tech Customer Service, Philadelphia, PA; Verizon Business Networks Services, Inc., Specialist-Tech Customer Service, Tampa, Florida; Amended Certification Regarding... Business Networks Services, Inc., Order Management Division, Philadelphia, Pennsylvania and Verizon...

Tech Prep Model for Marketing Education.

ERIC Educational Resources Information Center

Ruhland, Sheila K.; King, Binky M.

A project was conducted to develop two tech prep models for marketing education (ME) in Missouri to provide a sequence of courses for skill-enhanced and time-shortened programs. First, labor market trends, employment growth projections, and business and industry labor needs in Missouri were researched and analyzed. The analysis results were used…

Green Power Partnership Top 30 Tech & Telecom

EPA Pesticide Factsheets

The U.S. EPA's Green Power Partnership is a voluntary program designed to reduce the environmental impact of electricity generation by promoting renewable energy. On this list are the largest green power users among tech and telecom partners within the GPP

Alumni Giving at Arkansas Tech University: College Experiences and Motivations to Give as Predictors of Giving Behavior

ERIC Educational Resources Information Center

Lackie, Mary Bane

2010-01-01

The purpose of this study was to examine the characteristics of the "Lost Generation" alumni who ended their attendance or graduated from Arkansas Tech University (Tech) between January 1973 and December 1995 relating to their demographic characteristics, perceptions of college experiences, involvement with Tech after graduation, and attitudes…

Adapted managerial mathematical model to study the functions and interactions between enterprises in high-tech cluster

NASA Astrophysics Data System (ADS)

Anguelov, Kiril P.; Kaynakchieva, Vesela G.

2017-12-01

The aim of the current study is to research and analyze Adapted managerial mathematical model to study the functions and interactions between enterprises in high-tech cluster, and his approbation in given high-tech cluster; to create high-tech cluster, taking into account the impact of relationships between individual units in the cluster-Leading Enterprises, network of Enterprises subcontractors, economic infrastructure.

Tech Prep II: Implementation Final Report.

ERIC Educational Resources Information Center

Brown, Jane A.

This document contains the final progress report on a tech prep implementation project and the Work Force Challenge 2000 Report developed during the project. The final report lists these major accomplishments: approximately 1,500 educators in grades K-12 were provided information concerning future global issues in the work force and the effects in…

Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Report

ERIC Educational Resources Information Center

Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

2016-01-01

In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…

Is Education Facing a "Tech Bubble"?

ERIC Educational Resources Information Center

Davis, Michelle R.

2013-01-01

Educational technology companies and entrepreneurs may face the risk of a "tech bubble," similar to the massive boom-and-bust that rocked the technology market in the late 1990s, according to market analysts and a recently released paper. A relatively new focus on K-12 educational technology as an investment vehicle, a surge of investors looking…

The Road to Lasting Tech Leadership

ERIC Educational Resources Information Center

Luthra, Shabbi; Fochtman, Paul

2011-01-01

As with many schools, tech integration at the American School of Bombay (ASB) was varied and scattered. ASB had enthusiastic teachers who used technology in class, but they were the exception. As a result, just a small percentage of students experienced new ways of learning. The authors wanted to turn the occasional use of technology into a…

The Effect of Studying Tech Prep in High School and College Academic Performance

ERIC Educational Resources Information Center

Ray, Larry A.

2011-01-01

This study examined the academic performance of Tech Prep students (referred to as participants) in comparison to non-Tech Prep students (referred to as non-participants) entering a two-year community college from sixteen different high schools in Stark County, Ohio. This study provided a quantitative analysis of students' academic experiences to…

Tech Transfer News. Volume 9, No. 1

NASA Technical Reports Server (NTRS)

Victor, Megan E. (Compiler)

2017-01-01

Kennedy Tech Transfer News is the magazine of the Technology Transfer Office at NASA's Kennedy Space Center, Florida. This magazine seeks to inform and educate civil servant and contractor personnel at Kennedy Space Center about actively participating in achieving NASA's technology transfer and partnership goals.

Implementation of DoD ManTech Projects Receiving FY03-05 Funds

DTIC Science & Technology

2008-12-01

ManTech project is providing an integrated tool to grind, laser clad , and finish repair work of submarine VLS tubes. The system is scheduled for...hours from about 400 - 500 hours to 40 - 50 hours resulting in improved readiness. The in- situ laser clad process eliminates the use of hazardous...Alternate Remote Shipboard Lighting for Reduced Costs .......................................................... 14 2.2.10 ManTech for Military Lasers

Igniting the Spark: Tech Trek STEM Camps for Girls. Summary of Survey Findings

ERIC Educational Resources Information Center

American Association of University Women, 2014

2014-01-01

Tech Trek opens up STEM possibilities for girls in many contexts. It expands and influences their academic and social lives, starting in middle school and continuing on into their careers. The program seeks out talented girls, sparks their interest, illuminates the value of a college education, and validates their passions. Tech Trek's exciting,…

Aerodynamics of magnetic levitation (MAGLEV) trains

NASA Technical Reports Server (NTRS)

Schetz, Joseph A.; Marchman, James F., III

1996-01-01

High-speed (500 kph) trains using magnetic forces for levitation, propulsion and control offer many advantages for the nation and a good opportunity for the aerospace community to apply 'high tech' methods to the domestic sector. One area of many that will need advanced research is the aerodynamics of such MAGLEV (Magnetic Levitation) vehicles. There are important issues with regard to wind tunnel testing and the application of CFD to these devices. This talk will deal with the aerodynamic design of MAGLEV vehicles with emphasis on wind tunnel testing. The moving track facility designed and constructed in the 6 ft. Stability Wind Tunnel at Virginia Tech will be described. Test results for a variety of MAGLEV vehicle configurations will be presented. The last topic to be discussed is a Multi-disciplinary Design approach that is being applied to MAGLEV vehicle configuration design including aerodynamics, structures, manufacturability and life-cycle cost.

34 CFR 406.31 - How does a State carry out the State-Administered Tech-Prep Education Program?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false How does a State carry out the State-Administered Tech... TECH-PREP EDUCATION PROGRAM What Conditions Must Be Met After a State Receives an Award? § 406.31 How does a State carry out the State-Administered Tech-Prep Education Program? (a) A State board carries...

A systematic quality review of high-tech AAC interventions as an evidence-based practice.

PubMed

Morin, Kristi L; Ganz, Jennifer B; Gregori, Emily V; Foster, Margaret J; Gerow, Stephanie L; Genç-Tosun, Derya; Hong, Ee Rea

2018-06-01

Although high-tech augmentative and alternative communication (AAC) is commonly used to teach social-communication skills to people with autism spectrum disorder or intellectual disabilities who have complex communication needs, there is a critical need to evaluate the efficacy of this approach. The aim of this systematic review was to evaluate the quality of single-case experimental design research on the use of high-tech AAC to teach social-communication skills to individuals with autism spectrum disorder or intellectual disabilities who have complex communication needs, to determine if this intervention approach meets the criteria for evidence-based practices as outlined by the What Works Clearinghouse. Additionally, information on the following extended methodological standards is reported on all included studies: participant description, description of setting and materials, interventionist description, baseline and intervention description, maintenance, generalization, procedural integrity, and social validity. The results from 18 multiple-baseline or multiple-probe experiments across 17 studies indicate that using high-tech AAC to teach social-communication skills to individuals with autism spectrum disorder or intellectual disabilities and complex communication needs can be considered an evidence-based practice, although the review of comparison (i.e., alternating treatment) design studies did not indicate that high-tech AAC is significantly better than low-tech AAC.

Index to 1982 NASA Tech Briefs, volume 7, numbers 1-4

NASA Technical Reports Server (NTRS)

1986-01-01

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1982 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

Index to 1984 NASA Tech Briefs, volume 9, numbers 1-4

NASA Technical Reports Server (NTRS)

1987-01-01

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1984 Tech B Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

Index to 1981 NASA Tech Briefs, volume 6, numbers 1-4

NASA Technical Reports Server (NTRS)

1986-01-01

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1981 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

Index to 1983 NASA Tech Briefs, volume 8, numbers 1-4

NASA Technical Reports Server (NTRS)

1986-01-01

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1983 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

Index to 1986 NASA Tech Briefs, volume 11, numbers 1-4

NASA Technical Reports Server (NTRS)

1987-01-01

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1986 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

Index to 1985 NASA Tech Briefs, volume 10, numbers 1-4

NASA Technical Reports Server (NTRS)

1987-01-01

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1985 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

The Determinants of Federal and State Enforcement of Workplace Safety Regulations: OSHA Inspections 1990-2010*

PubMed Central

Jung, Juergen

2013-01-01

We explore the determinants of inspection outcomes across 1.6 million Occupational Safety and Health Agency (OSHA) audits from 1990 through 2010. We find that discretion in enforcement differs in state and federally conducted inspections. State agencies are more sensitive to local economic conditions, finding fewer standard violations and fewer serious violations as unemployment increases. Larger companies receive greater lenience in multiple dimensions. Inspector issued fines and final fines, after negotiated reductions, are both smaller during Republican presidencies. Quantile regression analysis reveals that Presidential and Congressional party affiliations have their greatest impact on the largest negotiated reductions in fines. PMID:24659856

2009 Navy ManTech Project Book

DTIC Science & Technology

2009-01-01

pieces which are welded together, filled with syntactic foam , and welded to the sail and hull structure. The ManTech project was successful in...cladding has demonstrated the required performance characteristics . The testing demonstrated manufacturability of optical fibers with enhanced hard...using Liquid Injection Molding Simulation (LIMS) and Polyworx software tools for infusion set-up optimization. Test articles fabricated are

LASER Tech Briefs, February 1995. Volume 3, No. 1

NASA Technical Reports Server (NTRS)

1995-01-01

Topics included in this issue of LASER Tech Briefs are: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Mechanics, Fabrication, and Mathematics and Information Sciences, and

NASA Tech Briefs, August 1998. Volume 22, No. 8

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage of medical design, electronic components and circuits, electronic systems, software, materials, mechanics, machinery/automation, physical sciences, and a special section of Photonics Tech Briefs.

NASA Tech Briefs, July 2001. Volume 25, No. 7

NASA Technical Reports Server (NTRS)

2001-01-01

Topics include: special coverage sections on Data Acquisition, and sections on electronic components and systems, software, mechanics, machinery/automation, biomedical and a special section of Photonics Tech Briefs.

Georgia tech catalog of gravitational waveforms

NASA Astrophysics Data System (ADS)

Jani, Karan; Healy, James; Clark, James A.; London, Lionel; Laguna, Pablo; Shoemaker, Deirdre

2016-10-01

This paper introduces a catalog of gravitational waveforms from the bank of simulations by the numerical relativity effort at Georgia Tech. Currently, the catalog consists of 452 distinct waveforms from more than 600 binary black hole simulations: 128 of the waveforms are from binaries with black hole spins aligned with the orbital angular momentum, and 324 are from precessing binary black hole systems. The waveforms from binaries with non-spinning black holes have mass-ratios q = m 1/m 2 ≤ 15, and those with precessing, spinning black holes have q ≤ 8. The waveforms expand a moderate number of orbits in the late inspiral, the burst during coalescence, and the ring-down of the final black hole. Examples of waveforms in the catalog matched against the widely used approximate models are presented. In addition, predictions of the mass and spin of the final black hole by phenomenological fits are tested against the results from the simulation bank. The role of the catalog in interpreting the GW150914 event and future massive binary black-hole search in LIGO is discussed. The Georgia Tech catalog is publicly available at einstein.gatech.edu/catalog.

LASER Tech Briefs, Fall 1994. Volume 2, No. 4

NASA Technical Reports Server (NTRS)

1994-01-01

Topics in this issue of LASER Tech briefs include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Fabrication Technology, Mathematics and Information Sciences, and Life Sciences

NASA Tech Briefs, August 2002. Volume 26, No. 8

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus on computers, electronic components and systems, software, materials, mechanics, machinery/automation, manufacturing, physical sciences, information sciences, book and reports, and Motion control Tech Briefs.

Building Career Tech Programs into Career Academies

ERIC Educational Resources Information Center

Delano, Rick; Mittelsteadt, Sandy

2005-01-01

In Manatee County, Florida, not only did they build career tech programs into career academies, but they also developed an evaluation process to ensure these career academies were credible. A District Academic team created the "Documentation of Academy Assessment Criteria" with 12 core components and a rubric that helps evaluators…

Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Technical Appendices

ERIC Educational Resources Information Center

Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

2016-01-01

In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…

Does the high–tech industry consistently reduce CO{sub 2} emissions? Results from nonparametric additive regression model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Bin; Research Center of Applied Statistics, Jiangxi University of Finance and Economics, Nanchang, Jiangxi 330013; Lin, Boqiang, E-mail: bqlin@xmu.edu.cn

China is currently the world's largest carbon dioxide (CO{sub 2}) emitter. Moreover, total energy consumption and CO{sub 2} emissions in China will continue to increase due to the rapid growth of industrialization and urbanization. Therefore, vigorously developing the high–tech industry becomes an inevitable choice to reduce CO{sub 2} emissions at the moment or in the future. However, ignoring the existing nonlinear links between economic variables, most scholars use traditional linear models to explore the impact of the high–tech industry on CO{sub 2} emissions from an aggregate perspective. Few studies have focused on nonlinear relationships and regional differences in China. Basedmore » on panel data of 1998–2014, this study uses the nonparametric additive regression model to explore the nonlinear effect of the high–tech industry from a regional perspective. The estimated results show that the residual sum of squares (SSR) of the nonparametric additive regression model in the eastern, central and western regions are 0.693, 0.054 and 0.085 respectively, which are much less those that of the traditional linear regression model (3.158, 4.227 and 7.196). This verifies that the nonparametric additive regression model has a better fitting effect. Specifically, the high–tech industry produces an inverted “U–shaped” nonlinear impact on CO{sub 2} emissions in the eastern region, but a positive “U–shaped” nonlinear effect in the central and western regions. Therefore, the nonlinear impact of the high–tech industry on CO{sub 2} emissions in the three regions should be given adequate attention in developing effective abatement policies. - Highlights: • The nonlinear effect of the high–tech industry on CO{sub 2} emissions was investigated. • The high–tech industry yields an inverted “U–shaped” effect in the eastern region. • The high–tech industry has a positive “U–shaped” nonlinear effect in other regions. • The linear

NASA Tech Briefs, April 1998. Volume 22, No. 4

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage on video and imaging, electronic components and circuits, electronic systems, physical sciences, materials, computer software, mechanics, machinery/automation, and a special section of Photonics Tech Briefs.

Virginia Tech State Task Force Reports Summary

ERIC Educational Resources Information Center

McBride, James T.

2010-01-01

An analysis of eleven state task force reports prompted by the tragic nature of the Virginia Tech shooting in 2007 revealed that all shared a primary theme: no "single best way" to protect American college and university campuses yet exists. These documents, individually and collectively, make it clear that contemporary complex learning…

High Touch in a High-Tech World

ERIC Educational Resources Information Center

Gibson, Cindy L.

2009-01-01

In a world of high tech and low touch, it is easy for public relations programs to stray from tried-and-true interpersonal strategies long associated with solid communication planning. New technologies allow communications professionals to quickly send e-mails and telephone calls to selected groups. Social media sites provide users immediate…

Patient Autonomy in a High-Tech Care Context - A Theoretical Framework.

PubMed

Lindberg, Catharina; Fagerström, Cecilia; Willman, Ania

2018-06-12

To synthesise and interpret previous findings with the aim of developing a theoretical framework for patient autonomy in a high-tech care context. Putting the somewhat abstract concept of patient autonomy into practice can prove difficult since when it is highlighted in healthcare literature the patient perspective is often invisible. Autonomy presumes that a person has experience, education, self-discipline and decision-making capacity. Reference to autonomy in relation to patients in high-tech care environments could therefore be considered paradoxical, as in most cases these persons are vulnerable, with impaired physical and/or metacognitive capacity, thus making extended knowledge of patient autonomy for these persons even more important. Theory development. The basic approaches in theory development by Walker and Avant were used to create a theoretical framework through an amalgamation of the results from three qualitative studies conducted previously by the same research group. A theoretical framework - the control-partnership-transition framework - was delineated disclosing different parts co-creating the prerequisites for patient autonomy in high-tech care environments. Assumptions and propositional statements that guide theory development were also outlined, as were guiding principles for use in day-to-day nursing care. Four strategies used by patients were revealed: the strategy of control, the strategy of partnership, the strategy of trust, and the strategy of transition. An extended knowledge base, founded on theoretical reasoning about patient autonomy, could facilitate nursing care that would allow people to remain/become autonomous in the role of patient in high-tech care environments. The control-partnership-transition framework would be of help in supporting and defending patient autonomy when caring for individual patients, as it provides an understanding of the strategies employed by patients to achieve autonomy in high-tech care contexts. The

Floor Plans Rolling Platform, Tech Systems Platform, and Load ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Floor Plans - Rolling Platform, Tech Systems Platform, and Load Platform Plans - Marshall Space Flight Center, F-1 Engine Static Test Stand, On Route 565 between Huntsville and Decatur, Huntsville, Madison County, AL

NASA Tech Briefs, November 2001. Volume 25, No. 11

NASA Technical Reports Server (NTRS)

2001-01-01

Topics include: special coverage section on data acquisition, and sections on electronic components and systems, software, materials, machinery/automation, physical sciences, book and reports, and a special section of Photonics Tech Briefs.

NASA Tech Briefs, September 2001. Volume 25, No. 9

NASA Technical Reports Server (NTRS)

2001-01-01

Topics include: special coverage section on sensors, and sections on electronic components systems, software, materials, machinery/automation, manufacturing/fabrication, bio-medical, book and reports, and a special section of Photonics Tech Briefs.

NASA Tech Briefs, May 2002. Volume 26, No. 5

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus on engineering materials, electronic components and circuits, software, mechanics, machinery/automation, manufacturing, physical sciences, information sciences, book and reports, and a special section of Photonics Tech Briefs.

NASA Tech Briefs, September 2002. Volume 26, No. 9

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus on data acquisition, electronic components and systems, software, materials, mechanics, machinery/automation, bio-medical, physical sciences, book and reports, and a special section of Photonics Tech Briefs.

NASA Tech Briefs, June 2002. Volume 26, No. 6

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus on data acquisition, electronic components and systems, software, materials, mechanics, machinery/automation, physical sciences, book and reports, motion control, and a special section of Photonics Tech Briefs.

Computer-Integrated Manufacturing Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile covers these occupations: manufacturing technician, computer-assisted design and drafting (CADD) technician, quality technician, and mechanical technician. Section 1 provides occupation definitions. Section 2 lists development committee members. Section 3 provides the leveling codes---abbreviations for grade level…

Low Tech Solutions: A Place To Begin.

ERIC Educational Resources Information Center

Ensign, Arselia S., Ed.

1992-01-01

This guide presents low tech solutions that have worked for some people with disabilities or their parents. Twenty-one ideas are offered to give children with physical disabilities more opportunities for play and art. Examples include recycling stuffed animals into puppets, punching a hole in top of playing cards to accommodate a mouth stick, and…

Relationship of Technology Education to Tech Prep.

ERIC Educational Resources Information Center

Anderson, Lowell D.

With increased global competition, it is imperative that secondary school programs be reformed so as to be able to turn out productive workers having basic skills in reading, writing, and mathematics and the ability to solve problems and learn new information. One proposed reform, tech prep, can be defined as a technical education alternative to…

CareerTech VISION 2012--Transforming CTE Together

ERIC Educational Resources Information Center

Bray, Janet B.

2012-01-01

As the leader in career and technical education (CTE), the Association for Career and Technical Education (ACTE) understands the ongoing challenges faced by the CTE community. That is why ACTE has created CareerTech VISION 2012, a bold and visionary event that addresses the evolving needs of the global society and meets all individual and…

5 Smart Investments for Your Tech Dollars

ERIC Educational Resources Information Center

Demski, Jennifer

2010-01-01

A downturn in the economic climate and an upturn in the technological climate might be higher education IT's "perfect storm." The confluence of budget cuts with the increased reliance on technology in almost all disciplines and administrative areas has put enormous pressure on campus IT leaders to pinpoint and fund tech services that achieve…

Pricing and inventory policies for Hi-tech products under replacement warranty

NASA Astrophysics Data System (ADS)

Tsao, Yu-Chung; Teng, Wei-Guang; Chen, Ruey-Shii; Chou, Wang-Ying

2014-06-01

Companies, especially in the Hi-tech (high-technology) industry (such as computer, communication and consumer electronic products), often provide a replacement warranty period for purchased items. In reality, simultaneously determining the price and inventory decisions under warranty policy is an important issue. The objective of this paper is to develop a joint pricing and inventory model for Hi-tech products under replacement warranty policy. In the first model, we consider a Hi-tech product feature in which the selling price is declining in a trend. We determine the optimal inventory level for each period and retail price for the first period while maximising the total profit. In the second model, we further determine the optimal retail price and inventory level for each period in the dynamic demand market. This study develops solution approaches to solve the problems described above. Numerical analysis discusses the influence of system parameters on the company's decisions and behaviours. The results of this study could serve as a reference for business managers or administrators.

NASA Tech Briefs, October 2002. Volume 26, No. 10

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus on sensors, electronic components and systems, software, materials, materials, mechanics, manufacturing, physical sciences, information sciences, book and reports, motion control and a special section of Photonics Tech Briefs.

NASA Tech Briefs, July 2002. Volume 26, No. 7

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus sensors, software, electronic components and systems, materials, mechanics, machinery/automation, manufacturing, bio-medical, physical sciences, information sciences, book and reports, and a special section of Photonics Tech Briefs.

ECO TECH LINK: PT3 Grant Builds Technology Circles in the K-18 Community.

ERIC Educational Resources Information Center

Klinger, Katie; Duckett, Jane; Medrano, Maria; Crow, Nedra; Stowers, Gwen

Through the vehicle of the PT3 grant program, ECO TECH LINK has built a strong consortium to support technology circles of government, education and business in order to raise student achievement scores, shorten the time it takes to earn a teaching credential, and enhance the quality of teacher credential courses. The ECO TECH LINK grant enables…

[Physical rehabilitation in multiple sclerosis: general principles and high-tech approaches].

PubMed

Peresedova, A V; Chernikova, L A; Zavalishin, I A

2013-01-01

In a chronic and disabling disease like multiple sclerosis, rehabilitation programs are of major importance for the preservation of physical, physiological, social and professional functioning and improvement of quality of life. Currently, it is generally assumed that physical activity is an important component of non-pharmacological rehabilitation in multiple sclerosis. Properly organized exercise is a safe and efficient way to induce improvements in a number of physiological functions. A multidisciplinary rehabilitative approach should be recommended. The main recommendations for the use of exercise for patients with multiple sclerosis have been listed. An important aspect of the modern physical rehabilitation in multiple sclerosis is the usage of high-tech methods. The published results of robot-assisted training to improve the hand function and walking impairment have been represented. An important trend in the rehabilitation of patients with multiple sclerosis is the reduction of postural disorders through training balance coordination. The role of transcranial magnetic stimulation in spasticity reducing is being investigated. The use of telemedicine capabilities is quite promising. Due to the fact that the decline in physical activity can lead to the deterioration of many aspects of physiological functions and, ultimately, to mobility decrease, further research of the role of physical rehabilitation as an important therapeutic approach in preventing the progression of disability in multiple sclerosis is required.

NASA Tech Briefs, November 2002. Volume 26, No. 11

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus on engineering materials, electronic components and systems, software, mechanics, machinery/automation, manufacturing, bio-medical, physical sciences, information sciences book and reports, and a special section of Photonics Tech Briefs.

NASA Tech Briefs, August 2001. Volume 25, No. 8

NASA Technical Reports Server (NTRS)

2001-01-01

Topics include: special coverage section on computers and peripherals, and sections on electronic components systems, software, materials, mechanics, manufacturing/fabrication, physical sciences, book and reports, and a special section of Motion Control Tech Briefs.

NASA Tech Briefs, March 2002. Volume 26, No. 3

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a special section on data acquisition, software, electronic components and systems, materials, computer programs, mechanics, machinery/automation, manufacturing, biomedical, physical sciences, book and reports, and a special section of Photonics Tech Briefs.

Computer-Integrated Manufacturing Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile for computer-integrated manufacturing technology begins with definitions for four occupations: manufacturing technician, quality technician, mechanical engineering technician, and computer-assisted design/drafting (CADD) technician. A chart lists competencies by unit and indicates whether entire or partial unit is…

National traffic speeds survey I: 2007 : traffic tech.

DOT National Transportation Integrated Search

2012-09-01

The speed survey reviewed in this edition of "Traffic Tech" was designed as a geographic cluster : sample of primary sampling units (PSUs), which can be : a city, county, or group of two or three counties. PSUs : were chosen to represent a range of c...

Virginia Tech: The Challenge of Assuring Safety

ERIC Educational Resources Information Center

Rikleen, Lauren Stiller

2007-01-01

The recent events at Virginia Tech reinforce the idea that nothing is more fundamental for college leaders to address than campus security and safety. After the tears, the makeshift memorials, and the intensely painful series of funerals, higher education must come to grips with the fact that it has just had its own September 11. Assessing and…

Planning and Designing Today's Career Tech Facility

ERIC Educational Resources Information Center

Seaman, James

2010-01-01

During the past 20 years, career and technical education (CTE) has gone through significant changes. CTE has evolved in response to the changes technology has had on the job market. Preparing students for high-tech, high-skill job opportunities is the new focus. The facilities that house these programs, however, have not kept pace with these…

School Violence Case Study at Virginia Tech

ERIC Educational Resources Information Center

Lyttle, LeighAnne

2012-01-01

On April 16, 2007, Seung Hui Cho, a livid and mentally ill student, shot to death 32 students and faculty of Virginia Tech, wounded many more people, and then killed himself. This incident has impacted college and university campuses nationwide in efforts to seek mentally disturbed students and help them, to have effective emergency teams, as well…

Exploring TechQuests Through Open Source and Tools That Inspire Digital Natives

NASA Astrophysics Data System (ADS)

Hayden, K.; Ouyang, Y.; Kilb, D.; Taylor, N.; Krey, B.

2008-12-01

"There is little doubt that K-12 students need to understand and appreciate the Earth on which they live. They can achieve this understanding only if their teachers are well prepared". Dan Barstow, Director of Center for Earth and Space Science Education at TERC. The approach of San Diego County's Cyberinfrastructure Training, Education, Advancement, and Mentoring (SD Cyber-TEAM) project is to build understandings of Earth systems for middle school teachers and students through a collaborative that has engaged the scientific community in the use of cyber-based tools and environments for learning. The SD Cyber-TEAM has used Moodle, an open source management system with social networking tools, that engage digital native students and their teachers in collaboration and sharing of ideas and research related to Earth science. Teachers participate in on-line professional dialog through chat, wikis, blogs, forums, journals and other tools and choose the tools that will best fit their classroom. The use of Moodle during the Summer Cyber Academy developed a cyber-collaboratory environment where teaching strategies were discussed, supported and actualized by participants. These experiences supported digital immigrants (teachers) in adapting teaching strategies using technologies that are most attractive and familiar to students (digital natives). A new study by the National School Boards Association and Grunwald Associates LLC indicated that "the online behaviors of U.S. teens and 'tweens shows that 96 percent of students with online access use social networking technologies, such as chatting, text messaging, blogging, and visiting online communities such as Facebook, MySpace, and Webkinz". While SD Cyber-TEAM teachers are implementing TechQuests in classrooms they use these social networking elements to capture student interest and address the needs of digital natives. Through the Moodle environment, teachers have explored a variety of learning objects called Tech

Wireless just-in-time training of mobile skilled support personnel

NASA Astrophysics Data System (ADS)

Bandera, Cesar; Marsico, Michael; Rosen, Mitchel; Schlegel, Barry

2006-05-01

Skilled Support Personnel (SSP) serve emergency response organizations during an emergency incident, and include laborers, operating engineers, carpenters, ironworkers, sanitation workers and utility workers. SSP called to an emergency incident rarely have recent detailed training on the chemical, biological, radiological, nuclear and/or explosives (CBRNE) agents or the personal protection equipment (PPE) relevant to the incident. This increases personal risk to the SSP and mission risk at the incident site. Training for SSP has been identified as a critical need by the National Institute for Environmental Health Sciences, Worker Education and Training Program. We present a system being developed to address this SSP training shortfall by exploiting a new training paradigm called just-in-time training (JITT) made possible by advances in distance learning and cellular telephony. In addition to the current conventional training at regularly scheduled instructional events, SSP called to an emergency incident will have secure access to short (<5 minutes) training modules specific to the incident and derived from the Occupational Safety and Health Administration (OSHA) Disaster Site Worker Course. To increase retention, each learning module incorporates audio, video, interactive simulations, graphics, animation, and assessment designed for the user interface of most current cell phones. Engineering challenges include compatibility with current cell phone technologies and wireless service providers, integration with the incident management system, and SCORM compliance.

NASA Tech Briefs, June 1995. Volume 19, No. 6

NASA Technical Reports Server (NTRS)

1995-01-01

Topics include: communications technology, electronic components and circuits, electronic systems, physical sciences, materials, computer programs, mechanics, machinery, manufacturing/fabrication, mathematics and information sciences, life sciences, books and reports, a special section of laser Tech Briefs.

KSC Tech Transfer News, Volume 5, No. 2

NASA Technical Reports Server (NTRS)

Nichols, James D.

2013-01-01

Kennedy Tech Transfer News is the semiannual magazine of the Innovative Partnerships Program Office at NASA Kennedy Space Center in Cape Canaveral, Florida. This magazine seeks to inform and educate cMI servant and Contractor personnel at Kennedy about actively participating in achieving NASA's technology transfer goals

An Automated Slide Classification System at Georgia Tech

ERIC Educational Resources Information Center

LoPresti, Maryellen

1973-01-01

The Georgia Tech Architecture Library slide collection is being revolutionized by adapting the Santa Cruz Slide Classification System. The slide catalog record is being transferred inexpensively to tapes and updated by the computer. Computer programs print out indexes in any of fifteen different sort fields. (Author)

75 FR 19626 - Notice of Intent To Grant Exclusive Patent License: SciTech Medical Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-15

... DEPARTMENT OF DEFENSE Department of the Navy Notice of Intent To Grant Exclusive Patent License: SciTech Medical Inc. AGENCY: Department of the Navy, DoD. ACTION: Notice. SUMMARY: The Department of the Navy hereby gives notice of its intent to grant a partially exclusive license to SciTech Medical...

NASA Tech Briefs, May 1998. Volume 22, No. 5

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage on advanced composites, plastics and metals, electronic components and circuits, electronic systems, physical sciences, computer software, mechanics, machinery/automation, manufacturing/fabrication book and reports, and a special section of Electronics Tech Briefs.

NASA Tech Briefs, January 1999. Volume 23, Mp/ 1

NASA Technical Reports Server (NTRS)

1999-01-01

Topics include: special coverage sections on sensors and data acquisition and sections on electronic components and circuits, electronic software, materials, mechanics, bio-medical physical sciences, book and reports, and a special section of Photonics Tech Briefs.

NASA Tech Briefs, July 1995. Volume 19, No. 7

NASA Technical Reports Server (NTRS)

1995-01-01

Topics include: mechanical components, electronic components and circuits, electronic systems, physical sciences, materials, computer programs, mechanics, machinery, manufacturing/fabrication, mathematics and information sciences, book and reports, and a special section of Federal laboratory computing Tech Briefs.

Curriculum Designs for Tech Prep Clusters. PACE '94.

ERIC Educational Resources Information Center

Schoon, Kenneth J., Ed.; Wiles, Clyde A., Ed.

This booklet contains descriptions of various Tech Prep programs developed by PACE (Promoting Academic Excellence In Mathematics, Science & Technology for Workers of the 21st Century). Each entry includes general program descriptions, curriculum outlines, and course descriptions. The clusters and their specialty areas described in the booklet are:…

Online Classes See Cheating Go High-Tech

ERIC Educational Resources Information Center

Young, Jeffrey R.

2012-01-01

Easy A's may be even easier to score these days, with the growing popularity of online courses. Tech-savvy students are finding ways to cheat that let them ace online courses with minimal effort, in ways that are difficult to detect. The issue of online cheating may rise in prominence, as more and more institutions embrace online courses, and as…

Tech-Prep Competency Profiles within the Health Technologies Cluster.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains competency profiles for Ohio tech prep courses in the following 12 health technologies occupations: radiographer, respiratory care therapist, occupational therapy assistant, physical therapist assistant, registered nurse (associate degree), pharmacy technologist, medical laboratory technician, histotechnologist, emergency…

a Study on the Document Information Service of the National Agricultural Library for Agricultural Sci-Tech Innovation in China

NASA Astrophysics Data System (ADS)

Xu, Qian; Meng, Xianxue

This paper presents the significant function of the Chinese National Agricultural Library (CNAL) in the agricultural sci-tech innovation system in China, analyses the development of collection and service in the CNAL, explores the challenge towards sustain and develop information services for the agricultural sci-tech research and innovation, at last proposes the strategy for sci-tech document information service development.

Shaking Up Biotech/Pharma: Can Cues Be Taken from the Tech Industry?

PubMed

Wang, C Katherine

2017-06-01

The biotech and pharma (biotech/pharma) industry is in dire need of finding ways to increase efficacy, efficiency, and affordability of its products. The information and technology industry ("tech") industry, which is an industry similarly founded on inventions and innovation, may provide some food for thought. This perspective will demonstrate the shift that biotech/pharma is already making and will propose that the industry has an opportunity to compel change by adopting some aspects of the tech industry with regards to models for technology/product development and leadership attributes.

Evaluation of TransTech joint maker and precompaction screed.

DOT National Transportation Integrated Search

2000-09-01

The primary objective of this evaluation is to determine the effectiveness of the Joint Maker and Precompaction : Screed, both developed by TransTech Systems, Inc., in achieving higher and more uniform density across the mat of : a rehabilitated Hot ...

NASA Tech Briefs, September 1995. Volume 19, No. 9

NASA Technical Reports Server (NTRS)

1995-01-01

A special focus for this issue is Sensors. Topics covered include : Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; and Mathematics and Information Sciences. A section of Laser Tech Briefs is included.

Tech Prep Associate Degree: A Win/Win Experience.

ERIC Educational Resources Information Center

Hull, Dan, Comp.; Parnell, Dale, Comp.

Designed to serve as a "how to" guide for policymakers, and state, federal, and institutional leaders, as well as public school and higher education practitioners interested in developing a Tech Prep/Associate Degree (TPAD) consortium, this book provides a detailed synthesis of successful TPAD consortia and programs. The first five…

Rhode Island Tech Prep Business & Industry Resource Guide.

ERIC Educational Resources Information Center

Community Coll. of Rhode Island, Warwick.

This guide provides educators with information about developing partnerships with businesses. It begins with a rationale for forging education-business relationships and highlights benefits to all parties--educators, businesses, and students. The Rhode Island Tech Prep Associate Degree Program is cited as an example of how to create win-win…

A legacy of struggle: the OSHA ergonomics standard and beyond, Part II.

PubMed

Delp, Linda; Mojtahedi, Zahra; Sheikh, Hina; Lemus, Jackie

2014-11-01

The OSHA ergonomics standard issued in 2000 was repealed within four months through a Congressional resolution that limits future ergonomics rulemaking. This section continues the conversation initiated in Part I, documenting a legacy of struggle for an ergonomics standard through the voices of eight labor, academic, and government key informants. Part I summarized important components of the standard; described the convergence of labor activism, research, and government action that laid the foundation for a standard; and highlighted the debates that characterized the rulemaking process. Part II explores the anti-regulatory political landscape of the 1990s, as well as the key opponents, power dynamics, and legal maneuvers that led to repeal of the standard. This section also describes the impact of the ergonomics struggle beyond the standard itself and ends with a discussion of creative state-level policy initiatives and coalition approaches to prevent work-related musculoskeletal disorders (WMSDs) in today's sociopolitical context.

LASER Tech Briefs, September 1993. Volume 1, No. 1

NASA Technical Reports Server (NTRS)

Schnirring, Bill (Editor)

1993-01-01

This edition of LASER Tech briefs contains a feature on photonics. The other topics include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, Life Sciences and books and reports.

NASA Tech Briefs, October 1998. Volume 22, No. 10

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage sections on sensors/imaging and mechanical technology, and sections on electronic components and circuits, electronic systems, software, materials, machinery/automation, manufacturing/fabrication, physical sciences, information sciences, book and reports, and a special section of Photonics Tech Briefs.

NASA Tech Briefs, December 1995. Volume 19, No. 12

NASA Technical Reports Server (NTRS)

1995-01-01

Topics include: a special focus section on Bio/Medical technology, electronic components and circuits, electronic systems, physical sciences, materials, computer programs, mechanics, machinery, manufacturing/fabrication, mathematics and information sciences, book and reports, and a special section on Laser Tech Briefs.

NASA Tech Briefs Index, 1977, volume 2, numbers 1-4

NASA Technical Reports Server (NTRS)

1977-01-01

Announcements of new technology derived from the research and development activities of NASA are presented. Abstracts, and indexes for subject, personal author, originating center, and Tech Brief number are presented for 1977.

Tech Prep Program in Financial Services. Final Report.

ERIC Educational Resources Information Center

Chicago Public Schools, IL.

A tech prep program in financial services, called Chicago Academy of Finance, was developed at Jones Metropolitan High School of Business and Commerce in Chicago, Illinois. The program was designed to integrate vocational and academic skills, with an emphasis on critical thinking skills. Of the 39 students initially enrolling in the first…

TechXcite: Discover Engineering--A New STEM Curriculum

ERIC Educational Resources Information Center

Sallee, Jeff; Schmitt-McQuitty, Lynn; Swint, Sherry; Meek, Amanda; Ybarra, Gary; Dalton, Rodger

2015-01-01

TechXcite is an engineering-focused, discovery-based after-school science, technology, engineering, and math (STEM) program. The free curriculum is downloadable from http://techxcite.pratt.duke.edu/ and is comprised of eight Modules, each with four to five 45-minute activities that exercise the science and math learned in school by using…

Employment and Earnings in High-Tech Ethnic Niches

ERIC Educational Resources Information Center

Lee, Jennifer C.

2013-01-01

The increase in high-skilled immigrants to the United States coincided with the expansion of the high-technology sector, and now a large share of Asian immigrants concentrate in high-tech industries. Despite much research on the relationship between ethnic concentration and labor market outcomes, the association between ethnic niche employment and…

Stringency of workplace air contaminant exposure limits: a case study of OSHA risk management.

PubMed

Hakes, J K

1999-12-01

Political context may play a large role in influencing the efficiency of environmental and health regulations. This case study uses data from a 1989 update of the Occupational Safety and Health Administration (OSHA) Permissible Exposure Limits (PELs) program to determine the relative effects of legislative mandates, costly acquisition of information by the agency, and pressure applied by special interest groups upon exposure standards. The empirical analysis suggests that federal agencies successfully thwart legislative attempts to limit agency discretion, and that agencies exercise bounded rationality by placing greater emphasis on more easily obtained information. The 1989 PELs were less significantly related to more costly information, contained "safety factors" for chemicals presenting relatively more ambiguous risks, and the proposed standard stringencies showed evidence of being influenced by vying industry and labor interests.

77 FR 65414 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Lead in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-26

... of Labor (DOL) is submitting the Occupational Safety and Health Administration (OSHA) sponsored... Information and Regulatory Affairs, Attn: OMB Desk Officer for DOL-OSHA, Office of Management and Budget, Room... occupational exposure to lead. Employers must monitor exposure to lead, provide medical surveillance, train...

It's Your Game-Tech: Toward Sexual Health in the Digital Age.

PubMed

Shegog, Ross; Peskin, Melissa F; Markham, Christine; Thiel, Melanie; Karny, Efrat; Addy, Robert C; Johnson, Kimberly A; Tortolero, Susan

2014-08-01

Adolescent sexually transmitted infection (STI) and birth rates indicate a need for effective middle school HIV/STI, and pregnancy prevention curricula to delay, or mitigate consequences of, early sexual activity. Individual and organizational barriers to adoption, implementation, and maintenance, however, can hamper dissemination of evidence-based sexual health curricula, adversely impacting fidelity and reach. Internet-based approaches may help mitigate these barriers. This paper describes the development and feasibility testing of It's Your Game ( IYG )-Tech, a stand-alone 13-lesson Internet-based sexual health life-skills curriculum adapted from an existing effective sexual health curriculum-It's Your Game… Keep it Real ( IYG ). IYG -Tech development adaptation steps were to: 1) Select a suitable effective program and gather the original program materials; 2) Develop "proof of concept" lessons and test usability and impact; 3) Develop the program design document describing the core content, scope, and methods and strategies; and 4) produce the new program. Lab- and school-based tests with middle school students demonstrated high ratings on usability parameters and immediate impact on selected psychosocial factors related to sexual behavior-perceptions of friends' beliefs, reasons for not having sex, condom use self-efficacy, abstinence intentions, negotiating with others to protect personal rules, and improved knowledge about what constitutes healthy relationships (all p < .05). Youth rated IYG -Tech is favorably compared to other learning channels (>76.2% agreement) and rated the lessons as helpful in making healthy choices, selecting personal rules, detecting challenges to those rules, and protecting personal rules through negotiation and refusal skills (89.5% - 100%). Further efficacy testing is indicated for IYG -Tech as a potential strategy to deliver effective HIV/STI, and pregnancy prevention to middle school youth.

Physics and Physical Science Units for Tech Prep.

ERIC Educational Resources Information Center

Bielefeld, Marilyn; Daniels, Sadie; Hall, Yolanda; McClendon, Cecil; Schlinger, Gary

Promoting ACademic Excellence in Mathematics and Science for Workers of the 21st Century (PACE) was a consortium project made up of Indiana University Northwest, the Gary Community Schools, and the Merrillville Community Schools. The focus of this project was to prepare teachers and curricula for Tech Prep mathematics and science courses for the…

Tragedy at Virginia Tech: Trauma and Its Aftermath

ERIC Educational Resources Information Center

Flynn, Christopher; Heitzmann, Dennis

2008-01-01

While college campuses are relatively safe environments, the promise of safety and security on campus was shattered by a single gunman on April 16, 2007. Seung-Hui Cho, a senior at Virginia Tech, shot 49 students and faculty, killing 32, before killing himself. The authors are psychologists and directors of university counseling centers; they…

Problems and Countermeasures of Zhejiang High-Tech Enterprises Industry-University-Institute Cooperation in China

NASA Astrophysics Data System (ADS)

Zhou, Qing; Mao, Chong-Feng; Hou, Lin

Industry-university-institute cooperation is an important means to accelerate technical development and achievements for high-tech enterprises. Considering that Zhejiang high-tech enterprises existed some problems which included low cooperative level, single distribution, weak secondary R&D ability, obvious risk and so on, government should play an guiding role on improving information service system, enhancing cooperative level, promoting scientific intermediary service organization system construction, and building better environment for Industry-university-institute cooperation.

Eclipse SteerTech liquid lenslet beam steering technology

NASA Astrophysics Data System (ADS)

Westfall, Raymond T.; Rogers, Stanley; Shannon, Kenneth C., III

2007-09-01

Eclipse SteerTech TM transmissive fluid state electrowetting technology has successfully demonstrated the ability to control the shape and position of a fluid lenslet. In its final form, the technology will incorporate a dual fluid lenslet approach capable of operating in extremely high acceleration environments. The beam steering system works on the principle of electro-wetting. A substrate is covered with a closely spaced array of, independently addressable, transparent, electrically conductive pixels utilizing Eclipse's proprietary EclipseTEC TM technology. By activating and deactivating selected EclipseTEC TM pixels in the proper sequence, the shape and position of fluid lenslets or arrays of lenslets can be dynamically changed at will. The position and shape of individual fluid lenslets may be accurately controlled on any flat, simply curved, or complex curved, transparent or reflective surface. The smaller the pixels the better control of the position and shape of the fluid lenslets. Information on the successful testing of the Eclipse SteerTech TM lenslet and discussion of its use in a de-centered lenslet array will be presented.

Development of a Career Student Guide for the Tech Prep Program for Henry County High School.

ERIC Educational Resources Information Center

Winchester, Ruth Ann

This practicum report describes the research conducted in preparation for developing a career student guide to acquaint students attending Henry County High School (HCHS) in McDonough, Georgia, with the school's new tech prep program. Chapters 1 and 2 contain background information about HCHS' tech prep program and a review of literature regarding…

78 FR 23622 - In the Matter of NewTech Brake Corp., Order of Suspension of Trading

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-19

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] In the Matter of NewTech Brake Corp., Order of Suspension of Trading April 17, 2013. It appears to the Securities and Exchange Commission that there is a lack of current and accurate information concerning the securities of NewTech Brake Corp. because it...

NASA Tech Briefs, December 2001. Volume 25, No. 12

NASA Technical Reports Server (NTRS)

2001-01-01

Topics include: special coverage section on sensors, and sections on electronic components and systems, software, materials, mechanics, information sciences, book and reports, and a special section of Motion Control Tech Briefs. It also contains a section celebrating the 25th anniversary of the publication.

Tech-Know: Integrating Engaging Activities through Standards-Based Learning

ERIC Educational Resources Information Center

Ernst, Jeremy V.; Taylor, Jerianne S.; Peterson, Richard E.

2005-01-01

In August 2001, North Carolina State University received a four-year grant from the National Science Foundation to develop standards-based instructional materials for 20 Technology Student Association (TSA) activities. The TECH-know Project represents a significant collaboration between selected state departments, universities, businesses, and…

High-Tech Versus High-Touch: Components of Hospital Costs Vary Widely.

PubMed

Song, Paula H; Reiter, Kristin L; Yi Xu, Wendy

The recent release by the Centers for Medicare & Medicaid Services of hospital charge and payment data to the public has renewed a national dialogue on hospital costs and prices. However, to better understand the driving force of hospital pricing and to develop strategies for controlling expenditures, it is important to understand the underlying costs of providing hospital services. We use Medicare Provider and Analysis Review inpatient claims data and Medicare cost report data for fiscal years 2008 and 2012 to examine variations in the contribution of "high-tech" resources (i.e., technology/medical device-intensive resources) versus "high-touch" resources (i.e., labor-intensive resources) to the total costs of providing two common services, as well as assess how these costs have changed over time. We found that high-tech inputs accounted for a greater proportion of the total costs of surgical service, whereas medical service costs were primarily attributable to high-touch inputs. Although the total costs of services did not change significantly over time, the distribution of high-tech, high-touch, and other costs for each service varied considerably across hospitals. Understanding resource inputs and the varying contribution of these inputs by clinical condition is an important first step in developing effective cost control strategies.

More than training: Community-based participatory research to reduce injuries among hispanic construction workers.

PubMed

Forst, Linda; Ahonen, Emily; Zanoni, Joseph; Holloway-Beth, Alfreda; Oschner, Michele; Kimmel, Louis; Martino, Carmen; Rodriguez, Eric; Kader, Adam; Ringholm, Elisa; Sokas, Rosemary

2013-08-01

Workplace mortality and severe injury are disproportionately distributed among foreign born and Hispanic construction workers. Worker Centers (WCs) provide services and advocacy for low-wage workers and a way for investigators to reach them. The goal of this project is to prevent occupational injuries by increasing awareness of hazards and self-efficacy among foreign born, Hispanic construction workers and by expanding the agenda of WCs to include occupational health and safety (H&S). Investigators partnered with eight WCs in seven cities to train worker leaders to deliver a modified OSHA 10-hr curriculum to their peers. Thirty-two worker leaders trained 446 workers over 3 years. There was a demonstrated improvement in knowledge, hazard identification, self-efficacy, and sustainable H&S activities. This study provides evidence for successful implementation of a training intervention for low wage, low literacy Hispanic construction workers using a community-based participatory research approach. Copyright © 2013 Wiley Periodicals, Inc.

Low-Tech Laser Learning: Can Less Be More?

ERIC Educational Resources Information Center

Tatsuki, Donna Hurst

1997-01-01

Examines an alternative to high-powered, high-tech use of laser disk technology in teaching English as a Second Language. Points out that there has not been a rush to install this technology because of cost, scarcity of courseware, incompatibility of the various delivery systems and the time investment/technical expertise required of the teacher.…

NASA Tech Briefs, July 1998. Volume 22, No. 7

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage on graphics and simulation, electronic components and circuits, electronic systems, materials, a second special coverage on mechanical technology, machinery/automation, and a special section of electronics Tech Briefs. There is also a section devoted to the technology of the International Space Station.

Chicago Manufacturing Tech Prep. Fiscal Year 1991 Final Report.

ERIC Educational Resources Information Center

Chicago City Colleges, IL.

During its first year of development in 1991, the Chicago Manufacturing Technical Preparation (Tech Prep) Program established a plan for implementing an industry-driven, articulated 4-year manufacturing technology course of study that integrates applied academic courses with technical courses and meets industry hiring standards. The project…

NASA Tech Briefs, March 1999. Volume 23, No. 3

NASA Technical Reports Server (NTRS)

1999-01-01

Topics include: special coverage sections on CAD/CAE/PDM, industrial controls and sections on electronic components systems, materials, software, mechanics, machinery/automation, manufacturing/fabrication, physical sciences, book and reports, and a special section of Photonics Tech Briefs and a seconds special section of Rapid Product Development.

Sino-Austrian High-Tech Acupuncture Network—Annual Report 2016

PubMed Central

Litscher, Gerhard

2017-01-01

The Sino-Austrian High-Tech Acupuncture Research Network was founded in 2005 and has been growing ever since. The network comprises many partners from China and is highly involved in research and education activities. This report introduces the network’s activities in the year 2016. PMID:28930227

Sino-Austrian High-Tech Acupuncture Network: Annual Report 2017

PubMed Central

2018-01-01

The Sino-Austrian High-Tech Acupuncture Research Network was founded in 2005 and has been growing ever since. The network comprises many partners from China and is highly involved in research and education activities. This report introduces the network’s activities in the year 2017. PMID:29329241

National Tech Prep Conference Review--Best Practices for Changing Times.

ERIC Educational Resources Information Center

Vandenberg, Victoria

1995-01-01

Provides an overview of the National Tech Prep Network Annual Conference in Atlanta, Georgia, October 5-7, 1995. Issues addressed include changes in funding for vocational education, new block grants, marketing programs, partnerships, and school to work. (JOW)

2014 International Conference on Science & Engineering in Mathematics, Chemistry and Physics (ScieTech 2014)

NASA Astrophysics Data System (ADS)

2014-04-01

2014 International Conference on Science & Engineering in Mathematics, Chemistry and Physics (ScieTech 2014), was held at the Media Hotel, Jakarta, Indonesia, on 13-14 January 2014. The ScieTech 2014 conference is aimed to bring together researchers, engineers and scientists in the domain of interest from around the world. ScieTech 2014 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Mathematics, Chemistry and Physics. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 187 papers and after rigorous review, 50 papers were accepted. The participants come from 16 countries. There are 5 (Five) Paralell Sessions and Four Keynote Speakers. It is an honour to present this volume of Journal of Physics: Conference Series (JPCS) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of ScieTech 2014. The Editors of the Scietech 2014 Proceedings: Dr. Ford Lumban Gaol Dr. Benfano Soewito Dr. P.N. Gajjar

Asia's New High-Tech Competitors: An SRS Special Report.

ERIC Educational Resources Information Center

Rausch, Lawrence M.

This report profiles nine economies linked by Asian identity, yet marked by great economic and technological disparity, in order to project which economies will be full-fledged participants and competitors in tomorrow's high-tech product markets. Based on the various indicators of technological activity and competitiveness presented in this…

40 CFR Appendix J to Subpart G of... - Substitutes listed in the January 29, 2002 Final Rule, effective April 1, 2002

Code of Federal Regulations, 2011 CFR

2011-07-01

... destroyed. 5—EPA has no intention of duplicating or displacing OSHA coverage related to the use of personal protective equipment (e.g., respiratory protection), fire protection, hazard communication, worker training..., subpart L, Sections 1910.160 and 1910.162. 2—Per OSHA requirements, protective gear (SCBA) should be...

40 CFR Appendix J to Subpart G of... - Substitutes listed in the January 29, 2002 Final Rule, effective April 1, 2002

Code of Federal Regulations, 2010 CFR

2010-07-01

... destroyed. 5—EPA has no intention of duplicating or displacing OSHA coverage related to the use of personal protective equipment (e.g., respiratory protection), fire protection, hazard communication, worker training..., subpart L, Sections 1910.160 and 1910.162. 2—Per OSHA requirements, protective gear (SCBA) should be...

Final Scientific/Technical Report Carbon Capture and Storage Training Northwest - CCSTNW

DOE Office of Scientific and Technical Information (OSTI.GOV)

Workman, James

This report details the activities of the Carbon Capture and Storage Training Northwest (CCSTNW) program 2009 to 2013. The CCSTNW created, implemented, and provided Carbon Capture and Storage (CCS) training over the period of the program. With the assistance of an expert advisory board, CCSTNW created curriculum and conducted three short courses, more than three lectures, two symposiums, and a final conference. The program was conducted in five phases; 1) organization, gap analysis, and form advisory board; 2) develop list serves, website, and tech alerts; 3) training needs survey; 4) conduct lectures, courses, symposiums, and a conference; 5) evaluation surveysmore » and course evaluations. This program was conducted jointly by Environmental Outreach and Stewardship Alliance (dba. Northwest Environmental Training Center – NWETC) and Pacific Northwest National Laboratories (PNNL).« less

Forming system of strategic innovation management at high-tech engineering enterprises

NASA Astrophysics Data System (ADS)

Ergunova, O. T.; Lizunkov, V. G.; Malushko, E. Yu; Marchuk, V. I.; Ignatenko, A. Yu

2017-02-01

The article considers the processes of forming the strategic system of innovative activity management at the enterprises of a high-tech mechanical engineering complex (MEC) that are traditionally decisive in shaping the economic base of Russia. The authors proposed a method of designing a strategic system of innovative activity management at the MEC’s enterprises of the region which is based on the consideration of means and opportunities of the enterprise to implement intellectual activity. The proposed methodology and the empirical results constituted a ground for developing a system of strategic innovation management when performing the state-guaranteed order at the hi-tech MEC enterprises. Its implementation will help to reduce the level of uncertainty throughout the entire life cycle of an innovative activity product.

Embracing the Common Cause Advocating for Ed Tech

ERIC Educational Resources Information Center

Roland, Jennifer

2006-01-01

This is a common response from educators confronted with the notion of advocating for educational technology funding. But, in a time when U.S. funding for Ed Tech is in danger of being cut from the budget, ISTE believes that all of its members, and in fact, all U.S. educators, must become advocates for our common cause. "Effective advocacy from…

Evidence-Based Design for Project-Based Learning: A Case Study for a 50,000 SF Addition Dedicated to the New Tech Curriculum

ERIC Educational Resources Information Center

Moretti, Richard D.; Conte, Philip R.

2012-01-01

The Seaford School District, Seaford, Delaware, determined that a component of their "reinvention" of Seaford High School would be the creation of a New Tech Academy, affiliated with the New Tech Network and housed in an addition to that building. The New Tech Network, headquartered in Napa, California, is a rapidly growing association…

APPLICATION ANALYSIS REPORT: THE DEHYDRO-TECH CORPORATION CARVER-GREENFIELD PROCESS

EPA Science Inventory

This report evaluates the Dehydro-Tech Corporation's Carver-Greenfield (C-G) Process and focuses on the technology’s ability to separate waste mixtures into their constituent solid, organic, and water fractions while producing a solid residual that meets applicable disposal requi...

IFLA General Conference, 1986. Education and Research Division. Section: Library School and Other Training Aspects. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations and Institutions, The Hague (Netherlands).

This document includes four papers on library school and other training aspects which were presented at the 1986 conference of the International Federation of Library Associations (IFLA). In "Meeting the Challenge of the High Tech Information Age--The Recent Development of Library and Information Science Education in the People's Republic of…

NASA Tech Briefs, October 1995. Volume 19, No. 10

NASA Technical Reports Server (NTRS)

1995-01-01

A special focus in this issue is Data acquisition and analysis. Topics covered include : Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; and Mathematics and Information Sciences. Also included in this issue are Laser Tech Briefs and Industry Focus: Motion Control/ Positioning Equipment

The Evolution of the Georgia Tech Library Circulation Department

ERIC Educational Resources Information Center

Glover, Karen

2006-01-01

The author reviews the evolution of the Circulation Department at the Georgia Institute of Technology (Georgia Tech) Library and Information Center from 2001 to the present. It is shown how a traditional circulation department with poor customer relations transformed itself by adopting innovative policies and services leading to improved customer…

Historical and Archeological Investigations of Fort Bisland and Lower Bayou Teche, St. Mary Parish, Louisiana

DTIC Science & Technology

1991-06-01

marsh deposits and sediments originating from the adjacent Lafourche delta complex. Relative sea level within the project region continues to rise...unique natural levee complex that consists of as many as three natural levees flanking both sides of Bayou Teche. From the center of Bayou Teche outward...loam, silty clay, and clay. These deposits are over 8 m thick beneath the center of the outer natural levee. These sediments interfinger and pinch out

Job Future's Bright for the Chefs of Muskingum Tech.

ERIC Educational Resources Information Center

Hoffman, Carl

1993-01-01

A two-year culinary arts program at Muskingum College (Zanesville, Ohio) prepares students for jobs in an emerging service-based economy. Students receive intensive classroom instruction and hands-on learning in a high-tech kitchen. Twenty-five full-time and 12 part-time students are completing their first year in the program. (LP)

The Effects of Partnership Management on Supply Chain Cooperative Performance: A Case Study of High-Tech Industry

NASA Astrophysics Data System (ADS)

Wu, Mei-Ying; Chang, Yun-Ju; Weng, Yung-Chien

2009-08-01

With the structural change of global supply chains, the relationship between manufacturers and suppliers has transformed into a long-term partnership. Thus, this study aims to explore the partnership between manufacturers and suppliers in Taiwan's high-tech industry. Four constructs, including partner characteristic, partnership quality, partnership closeness, and cooperative performance, induced from previous literatures are used to construct the research framework and hypotheses. A questionnaire survey is then performed on executives and staffs involved in the high-tech industry. The proposed framework and hypotheses are empirically validated through confirmatory factory analysis and structural equation modeling. It is expected that the research findings can serve as a reference for Taiwan's high-tech industry on building partnerships.

Effects of an 8-Week Outdoor Brisk Walking Program on Fatigue in Hi-Tech Industry Employees: A Randomized Control Trial.

PubMed

Wu, Li-Ling; Wang, Kuo-Ming; Liao, Po-I; Kao, Yu-Hsiu; Huang, Yi-Ching

2015-10-01

Over 73% of hi-tech industry employees in Taiwan lack regular exercise. They are exposed to a highly variable and stressful work environment for extended periods of time, and may subsequently experience depression, detrimental to workers' physiological and mental health. In this cross-sectional survey, the authors explored the effect of an 8-week brisk walking program on the fatigue of employees in the hi-tech industry. The participants, from a hi-tech company in northern Taiwan, were randomly assigned to an experimental group (EG; 41 subjects, Mage = 33.34 ± 6.40) or control group (CG; 45 subjects, Mage = 29.40 ± 3.60). Following the 8-week brisk walking program, the EG showed significantly lower scores for subjective fatigue, working motivation, attention, and overall fatigue. The authors confirmed that the 8-week outdoor brisk walking program significantly improved the level of fatigue among employees of the hi-tech industry. The finding serves as an important reference for health authorities in Taiwan and provides awareness of workplace health promotion in the hi-tech industry. © 2015 The Author(s).

Risk Factors for Heat-related Illness in U.S. Workers: An OSHA Case Series.

PubMed

Tustin, Aaron W; Cannon, Dawn L; Arbury, Sheila B; Thomas, Richard J; Hodgson, Michael J

2018-05-30

The aim of this study was to describe risk factors for heat-related illness (HRI) in U.S. workers. We reviewed a subset of HRI enforcement investigations conducted by the Occupational Safety and Health Administration (OSHA) from 2011 through 2016. We assessed characteristics of the workers, employers, and events. We stratified cases by severity to assess whether risk factors were more prevalent in fatal HRIs. We analyzed 38 investigations involving 66 HRIs. Many workers had predisposing medical conditions or used predisposing medications. Comorbidities were more prevalent in workers who died. Most (73%) fatal HRIs occurred during the first week on the job. Common clinical findings in heat stroke cases included multiorgan failure, muscle breakdown, and systemic inflammation. Severe HRI is more likely when personal susceptibilities coexist with work-related and environmental risk factors. Almost all HRIs occur when employers do not adhere to preventive guidelines.

TechEdSat 5 PhoneSat 5 Team Photo

NASA Image and Video Library

2016-07-28

TechEdSat 5 PhoneSat 5 Team photo on July 26, 2016. Taken in fron of the 1/3 scale Shuttle Orbiter Model, in front of the Parade Ground on Clark Road at NASA Research Park. Mark Murbach Sarosh Hussain Ali Guarneros Luna David Handy Jonathan Hanson Jakqueline Granillo Sarah Chu Alejandro Sales

Learning and recall of Worker Protection Standard (WPS) training in vineyard workers.

PubMed

Anger, W Kent; Patterson, Lindsey; Fuchs, Martha; Will, Liliana L; Rohlman, Diane S

2009-01-01

Worker Protection Standard (WPS) training is one of the U.S. Environmental Protection Agency's (EPA) primary methods for preventing pesticide exposure in agricultural workers. Retention of the knowledge from the training may occasionally be tested by state Occupational Safety and Health Administrations (state OSHAs) during a site visit, but anecdotal evidence suggests that there is no consistent testing of knowledge after WPS training. EPA's retraining requirements are at 5-year intervals, meaning the knowledge must be retained for that long. Vineyard workers completed a test of their baseline WPS knowledge, computer-based training on WPS, a post-test immediately after training and a re-test 5 months later. Pre-test performance suggested that there was a relatively high level of baseline knowledge of WPS information on two-answer multiple choice tests (74% to 75%) prior to training. Training increased the knowledge to 85% on the post-test with the same questions, a significant increase (p < .001, 1-tailed) and a large effect size (d) of .90. Re-test performance (78%) at 5 months revealed a return towards but not back to the pre-test levels. Better test performance was significantly correlated with higher education and to a lesser extent with younger ages. Whether this level of knowledge is sufficient to protect agricultural workers remains an open question, although an increase in the proportion of people in a work group who know the critical WPS information may be the most important impact of training.

CareerTech VISION 2012--What You Need to Succeed

ERIC Educational Resources Information Center

Tech Directions, 2012

2012-01-01

The Association for Career and Technical Education (ACTE) is gearing up once again for its annual convention, to be held November 28-December 1 in Atlanta, at the Georgia World Congress Center. The Association describes CareerTech VISION 2012 as "the most exciting CTE event of the year....This dynamic event features a new format that is…

Computer Problems Can Infuriate Even the Most Tech Savvy

ERIC Educational Resources Information Center

Goldsborough, Reid

2004-01-01

Which high-tech products give you the most grief? Surprisingly, more people singled out TiVo and replay digital recording systems than personal computers, according to a recent survey by Best Buy. Nine percent of people said they found these TV devices difficult to use. The same percentage found PDAs (personal digital assistants) difficult. Only 2…

Virginia Tech Campaign to Count Gifts Made to Victims

ERIC Educational Resources Information Center

Strout, Erin

2007-01-01

Virginia Tech has decided to count gifts to a memorial fund for victims of the April 16 shootings toward its goal of raising $1-billion in a capital campaign. Higher-education fund-raising experts agree that counting the memorial-fund contributions toward the total does not break common donation-reporting guidelines. Many big college fund-raising…

Iowa High School High Tech: Promoting Careers in Technology for Students with Disabilities. Final Report and Implementation Manual.

ERIC Educational Resources Information Center

McQuillen, Terry; Nietupski, John; Berg, Deana Duncan; Daugherty, Vicki; Bildstein, Stephanie

This final report and implementation manual describes the activities and outcomes of Iowa's High School High Tech (HSHT) program, a joint effort of Grant Wood Area Education Agency and Goodwill Industries of Southeast Iowa to inspire students with disabilities to pursue high tech careers. The program provides opportunities for students to learn…

Examination of the New Tech Model as a Holistic Democracy

ERIC Educational Resources Information Center

Bradley-Levine, Jill; Mosier, Gina

2017-01-01

Using the Degrees of Democracy Framework (Woods & Woods, 2012), we examined eight New Tech (NT) high schools to determine the extent to which they demonstrated characteristics of holistic democracy. We collected qualitative data, including observations and interviews during the fourth year of implementation. Findings indicated that the eight…

76 FR 39041 - Infectious Diseases

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-05

... controls, and personal protective equipment); medical surveillance; worker training; signage and labeling.... Whether and to what extent an OSHA standard should contain signage, labeling, and worker training...

TechTracS: NASA's commercial technology management system

NASA Astrophysics Data System (ADS)

Barquinero, Kevin; Cannon, Douglas

1996-03-01

The Commercial Technology Mission is a primary NASA mission, comparable in importance to those in aeronautics and space. This paper will discuss TechTracS, NASA Commercial Technology Management System that has been put into place in FY 1995 to implement this mission. This system is designed to identify and capture the NASA technologies which have commercial potential into an off-the-shelf database application, and then track the technologies' progress in realizing the commercial potential through collaborations with industry. The management system consists of four stages. The first is to develop an inventory database of the agency's entire technology portfolio and assess it for relevance to the commercial marketplace. Those technologies that are identified as having commercial potential will then be actively marketed to appropriate industries—this is the second stage. The third stage is when a NASA-industry partnership is entered into for the purposes of commercializing the technology. The final stage is to track the technology's success or failure in the marketplace. The collection of this information in TechTracS enables metrics evaluation and can accelerate the establishment on direct contacts between and NASA technologist and an industry technologist. This connection is the beginning of the technology commercialization process.

Communications for Lifelong Success I and II (Tech Prep English I and II). Pilot Test Materials for Pendleton High School, Pendleton, South Carolina. Draft.

ERIC Educational Resources Information Center

Turlington, Anita; And Others

These instructional materials include six supplementary units for Tech Prep English I (grade 9) and six assignments for Tech Prep English II (grade 10). The Tech Prep English I units have these components: unit objectives, introduction, and follow-up exercises. Topics include goal setting, problem solving and decision making, listening and reading…

Compliance of SLAC_s Laser Safety Program with OSHA Requirements for the Control of Hazardous Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woods, Michael; /SLAC

SLAC's COHE program requires compliance with OSHA Regulation 29CFR1910.147, 'The control of hazardous energy (lockout/tagout)'. This regulation specifies lockout/tagout requirements during service and maintenance of equipment in which the unexpected energization or start up of the equipment, or release of stored energy, could cause injury to workers. Class 3B and Class 4 laser radiation must be considered as hazardous energy (as well as electrical energy in associated equipment, and other non-beam energy hazards) in laser facilities, and therefore requires careful COHE consideration. This paper describes how COHE is achieved at SLAC to protect workers against unexpected Class 3B or Classmore » 4 laser radiation, independent of whether the mode of operation is normal, service, or maintenance.« less

NASA Tech Briefs, March 1998. Volume 22, No. 3

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage of computer aided design and engineering, electronic components and circuits, electronic systems, physical sciences, materials, computer software, special coverage on mechanical technology, machinery/automation, manufacturing/fabrication, mathematics and information sciences, book and reports, and a special section of Electronics Tech Briefs. Profiles of the exhibitors at the National Design Engineering show are also included in this issue.

High Tech. High Technology in Vocational Education. Training Programs for Emerging Occupations.

ERIC Educational Resources Information Center

Rodenstein, Judith, Ed.

This publication represents the collaborative efforts of vocational educators who are involved in the planning and teaching of high technology training programs. It contains a series of reports and profiles which illustrate the diversity of high technology programs in vocational education institutions and the variety of approaches that can be used…

Human Resource Blueprints in Irish High-Tech Start-Up Firms

ERIC Educational Resources Information Center

Keating, Mary A.; Olivares, Mariabrisa

2006-01-01

Focusing on Irish high-tech start-ups, this paper reports on the results of an empirical study of organization building by entrepreneurial firms, specifically in relation to human resource practices. The research findings are benchmarked with findings from SPEC, the Stanford Project of Emerging Companies (Baron and Hannan, 2002). Human resources…

Report on Virginia Tech Shootings Urges Clarification of Privacy Laws

ERIC Educational Resources Information Center

Fischer, Karin

2007-01-01

Educators, mental-health officials, and law-enforcement officers often do not share information about troubled students because they are confused by what they can disclose under complex and overlapping privacy laws, according to a report on the Virginia Tech shootings. Attorney General Alberto R. Gonzales and two other Bush cabinet secretaries…

Handbook for Student Assistants of New Mexico Tech Library. [Revised.

ERIC Educational Resources Information Center

1992

This guide, which gives student library assistants background information about the New Mexico Tech Library as a whole, is designed to be used in conjunction with the operations manual of the department in which the assistant is placed. It provides information under four headings: (1) Library Departments (reference, interlibrary loan, technical…

Astronomy as a Tool for Training the Next Generation Technical Workforce

NASA Astrophysics Data System (ADS)

Romero, V.; Walsh, G.; Ryan, W.; Ryan, E.

A major challenge for today's institutes of higher learning is training the next generation of scientists, engineers, and optical specialists to be proficient in the latest technologies they will encounter when they enter the workforce. Although research facilities can offer excellent hands-on instructional opportunities, integrating such experiential learning into academic coursework without disrupting normal operations at such facilities can be difficult. Also, motivating entry level students to increase their skill levels by undertaking and successfully completing difficult coursework can require more creative instructional approaches, including fostering a fun, non-threatening environment for enhancing basic abilities. Astronomy is a universally appealing subject area, and can be very effective as a foundation for cultivating advanced competencies. We report on a project underway at the New Mexico Institute of Mining and Technology (NM Tech), a science and engineering school in Socorro, NM, to incorporate a state-of-the-art optical telescope and laboratory experiments into an entry-level course in basic engineering. Students enrolled in an explosive engineering course were given a topical problem in Planetary Astronomy: they were asked to develop a method to energetically mitigate a potentially hazardous impact between our planet and a Near-Earth asteroid to occur sometime in the future. They were first exposed to basic engineering training in the areas of fracture and material response to failure under different environmental conditions through lectures and traditional laboratory exercises. The students were then given access to NM Tech's Magdalena Ridge Observatory's (MRO) 2.4-meter telescope to collect physical characterization data, (specifically shape information) on two potentially hazardous asteroids (one roughly spherical, the other an elongated ellipsoid). Finally, the students used NM Tech's Energetic Materials Research and Testing Center (EMRTC) to

Effects of job-related stress and burnout on asthenopia among high-tech workers.

PubMed

Ostrovsky, Anat; Ribak, Joseph; Pereg, Avihu; Gaton, Dan

2012-01-01

Eye- and vision-related symptoms are the most frequent health problems among computer users. The findings of eye strain, tired eyes, eye irritation, burning sensation, redness, blurred vision and double vision, when appearing together, have recently been termed 'computer vision syndrome', or asthenopia. To examine the frequency and intensity of asthenopia among individuals employed in research and development departments of high-tech firms and the effects of job stress and burnout on ocular complaints, this study included 106 subjects, 42 high-tech workers (study group) and 64 bank employees (control group). All participants completed self-report questionnaires covering demographics, asthenopia, satisfaction with work environmental conditions, job-related stress and burnout. There was a significant between-group difference in the intensity of asthenopia, but not in its frequency. Burnout appeared to be a significant contributing factor to the intensity and frequency of asthenopia. This study shows that burnout is a significant factor in asthenopic complaints in high-tech workers. This manuscript analyses the effects of psychological environmental factors, such as job stress and burnout, on ocular complaints at the workplace of computer users. The findings may have an ergonomic impact on how to improve health, safety and comfort of the working environment among computer users, for better perception of the job environment, efficacy and production.

High Tech and the Upward Mobility of Non-Technical People.

ERIC Educational Resources Information Center

Kammire, Linda L.

The social and psychological effects of rapid technological advancement in the computer industry is the subject of this paper, which focuses on the concerns of people with non-technical backgrounds. It describes the career series, High Tech for Non-Technical People, created by the Georgia State University Career Development Center. The three…

Spaces of Innovation: Experiences from Two Small High-Tech Firms

ERIC Educational Resources Information Center

Heiskanen, Tuula; Heiskanen, Hannu

2011-01-01

Purpose: By comparing two small high-tech firms specialising in medical technology this article seeks to answer the following questions: What are the key characteristics of innovation processes in the case firms? How do the mutual relationships between mental, social and physical spaces explain the different pathways in the innovation processes in…

Developing Games and Simulations for Today and Tomorrow's Tech Savvy Youth

ERIC Educational Resources Information Center

Klopfer, Eric; Yoon, Susan

2005-01-01

Constructively promoting the educational development of today's young tech savvy students and fostering the productive technological facility of tomorrow's youth requires harnessing new technological tools creatively. The MIT Teacher Education Program (TEP) focuses on the research and development of educational computer-based simulations and games…

SITE DEMONSTRATION BULLETIN - ENHANCED IN-SITU BIOREMEDIATION PROCESS, EARTH TECH, INC.

EPA Science Inventory

The USEPA conducted an evaluation of the Enhanced In-situ Bioremediation process, a biostimulation technology developed by the USDOE at the Westinghouse Savannah River Plant site in Aiken, SC. DOE has licensed the process to Earth Tech, Inc. The evaluation described in this bulle...

ACE TECH: The Fourth Year of CTE and Academic Integration

ERIC Educational Resources Information Center

Knight, Eileen Quinn; Donahue, John; Knight, Patrick

2008-01-01

It only takes an hour or two of roaming the halls of Architecture, Construction and Engineering (ACE) Tech Charter High School to detect an enduring attitude of accomplishment from both the teachers and the students. This atmosphere is intentional. The school, located in Chicago, was created specifically to hone the skills of individuals choosing…

High-Tech Betrayal: Working and Organizing on the Shop Floor.

ERIC Educational Resources Information Center

Devinatz, Victor G.

This book, which is based on a 7-month ethnographic study of working conditions and employment practices at a biomedical electronics factory, examines the impact that high tech has had on the relationship between management and workers in the manufacturing industry. The following are among the topics discussed in the book's 10 chapters: (1) the…

From High School to Work: 150 Great Tech Prep Careers.

ERIC Educational Resources Information Center

1998

This book presents information on 150 careers in a wide variety of fields that fall under the broad category of tech prep. Each four- to five-page profile contains the following: definition of the occupation, the nature of the work, requirements for educational and work experiences needed to enter and advance, opportunities for experience and…

Mechatronics education at Virginia Tech

NASA Astrophysics Data System (ADS)

Bay, John S.; Saunders, William R.; Reinholtz, Charles F.; Pickett, Peter; Johnston, Lee

1998-12-01

The advent of more complex mechatronic systems in industry has introduced new opportunities for entry-level and practicing engineers. Today, a select group of engineers are reaching out to be more knowledgeable in a wide variety of technical areas, both mechanical and electrical. A new curriculum in mechatronics developed at Virginia Tech is starting to bring students from both the mechanical and electrical engineering departments together, providing them wit an integrated perspective on electromechanical technologies and design. The course is cross-listed and team-taught by faculty from both departments. Students from different majors are grouped together throughout the course, each group containing at least one mechanical and one electrical engineering student. This gives group members the ability to learn from one another while working on labs and projects.

Development of textile-based high-tech products: the new challenge.

PubMed

da Rocha, Ana Maria M F

2004-01-01

The new generation of smart textiles is represented by fibers, yarns, fabrics and other resulting products that have special properties, regarding mechanical, chemical, electrical and thermal performances. These high-tech products, being able to respond to external stimuli through the integration of electronic components, phase change materials, shape memory materials or nano materials, enabled the development of different active and functional products. These products when combining the functions of medium, carrier and interface for micro-systems applications represent the ideal connecting channel between humans and the environment. This is a field of innovation that broadened the scope of the traditional textile and apparel products to high-tech textiles, designed to meet specific needs, involving different technologies and produced according to required properties, like personal protection, safety, leisure or health wear. The development of smart wear is a new challenge for the textile and clothing industry: it has to develop products based not only on design, fashion and comfort concepts but also in terms of functions. Moreover these products must be easy to care and durable.

Training in reproductive endocrinology and infertility and assisted reproductive technologies: options and worldwide needs.

PubMed

de Ziegler, Dominique; de Ziegler, Nathalie; Sean, Sokteang; Bajouh, Osama; Meldrum, David R

2015-07-01

Standardized, high-quality training in reproductive endocrinology, infertility, and assisted reproductive technologies (REI-ART) faces challenges owing to the high-tech nature of ART and the important country-to-country differences in clinical practice and regulations overseeing training. Moreover, while the training capacity of the classical by-fellowship training platforms is shrinking, an increasing demand for REI-ART specialists is coming from emerging countries. To meet this expanding need for REI-ART specialists, we propose a novel by-network model linking a reference training center to satellite practical training sites. Simulation should be used more extensively to achieve competency before initiating live clinical experience, analogous to the highly effective training systems that have been used in aviation for decades. Large ART databases that exist because of obligations to report ART activity and results constitute unique yet so far untapped sources for developing by-scenario simulation training models. Online training materials incorporating these state-of-the-art information technology tools could be developed as a means of fulfilling training needs worldwide. Copyright © 2015. Published by Elsevier Inc.

PREFACE: Modern Technologies in Industrial Engineering (ModTech2015)

NASA Astrophysics Data System (ADS)

Oanta, E.; Comaneci, R.; Carausu, C.; Placzek, M.; Cohal, V.; Topala, P.; Nedelcu, D.

2015-11-01

The dominant feature of the current stage of society development is the update, refinement and innovation of the technological processes and products whose ultimate goal is to satisfy the market requirements. New and modern technologies should be considered in terms of their applicability in industry while the materials can lead to an increase in the quality of the end products. Replacing the existing technologies with innovative and eco-efficient technologies can contribute to an added value increase in the production of new materials. Materials are one of the most dynamic and prospective fields, with applications in all other fields. The development of new advanced materials and technologies shall contribute to the procurement of a wide range of reliable products, with competitive prices and worldwide performance, high sensitivity and functionality, user-friendly and reduced energy consumption, for different industrial applications. Research in the field of advanced/intelligent materials supposes a fundamental, experimental, laboratory and technological research and its approach has to be linked to the application. This involves, even for the niche fields, complex projects which result in scientific issues in top journals, patents and functional models. The third edition of ModTech International Conference was held in Mamaia, Romania, between June 17-20, with the Professional Association in Modern Manufacturing Technologies, ModTech, as main organizer, and the Constanta Maritime University, Constanta, Romania, Silesian University of Technology, Gliwice, Poland, the Technical University of Chisinau, Republic of Moldova and the Donetsk National Technical University, Donetsk, Ukraine as co-organizers. The ModTech2015 International Conference brought together representatives of technology and materials manufacturers, various universities, professional associations and research institutes that exchanged the latest knowledge on the conference topics. This edition was

Does the Number of College Credits Earned in a Tech Prep and Postsecondary Enrollment Options Program Predict College Success?

ERIC Educational Resources Information Center

Meyer, Bruce A.

2011-01-01

The purpose of this study was to examine a Tech Prep Program located in Northwest Ohio and determine the degree to which college credits earned in high school through the Tech Prep and PSEO Programs predict college success and if there were any significant gender/race differences in credits earned and college success as well as high school…

Challenges to achievement of metal sustainability in our high-tech society

DOE Office of Scientific and Technical Information (OSTI.GOV)

Izatt, Reed M.; Izatt, Steven R.; Bruening, Ronald L.

Achievement of sustainability in metal life cycles from mining of virgin ore to consumer and industrial devices to end-of-life products requires greatly increased recycling and improved processing of metals. Electronic and other high-tech products containing precious, toxic, and specialty metals usually have short lifetimes and low recycling rates. Products containing these metals generally are incinerated, discarded as waste in landfills, or dismantled in informal recycling using crude and environmentally irresponsible procedures. Low metal recycling rates coupled with increasing demand for products containing them necessitate increased mining with attendant environmental, health, energy, water, and carbon-footprint consequences. In this tutorial review, challengesmore » to achieving metal sustainability in present high-tech society are presented; health, environmental, and economic incentives for various stakeholders to improve metal sustainability are discussed; a case for technical improvements in separations technology, especially employing molecular recognition, is given; and global consequences of continuing on the present path are examined.« less

Project DATA-TECH. 1990-91 Final Evaluation Profile. OREA Report.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Office of Research, Evaluation, and Assessment.

An evaluation was done of New York City Public Schools' Project DATA-TECH, which served limited English proficient high school students interested in computer-aided drafting (CAD) and cosmetology programs. The program served 190 students at Sara J. Hale High School in Brooklyn, of whom 89.5 percent were eligible for the Free Lunch Program and most…

Project Data-Tech. Final Evaluation Report, 1993-1994. OER Report.

ERIC Educational Resources Information Center

Roman, Elliott M.

Project Data-Tech was an Elementary and Secondary Education Act Title VII-funded project in its fifth and last year of operation at a high school in Brooklyn (New York). The program served a total of 131 Haitian- and Spanish-speaking students, most of whom were of limited English proficiency, 54 fewer than in the previous year. Participating…

Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries

PubMed Central

Tsai, Sang-Bing; Huang, Chih-Yao; Wang, Cheng-Kuang; Chen, Quan; Pan, Jingzhou; Wang, Ge; Wang, Jingan; Chin, Ta-Chia; Chang, Li-Chung

2016-01-01

R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance–performance analysis (IPA) with the decision-making trial and evaluation laboratory (DEMATEL) method to propose an IPA–DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed. PMID:27139697

Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries.

PubMed

Tsai, Sang-Bing; Huang, Chih-Yao; Wang, Cheng-Kuang; Chen, Quan; Pan, Jingzhou; Wang, Ge; Wang, Jingan; Chin, Ta-Chia; Chang, Li-Chung

2016-01-01

R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance-performance analysis (IPA) with the decision-making trial and evaluation laboratory (DEMATEL) method to propose an IPA-DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed.

KSC Tech Transfer News, Volume 3, No. 1

NASA Technical Reports Server (NTRS)

Dunn, Carol (Editor)

2010-01-01

Kennedy Tech Transfer News is the semiannual magazine of the Innovative Partnerships Program at NASA's Kennedy Space Center in Cape Canaveral, Florida. This magazine seeks to inform and educate civil servant and contractor personnel at Kennedy about actively participating in achieving NASA's technology transfer and partnership goals. The contents include: 1) About IPP; 2) NTR corner; 3) Innovator Insights; 4) Licensing Success; 5) Partnership Success; 6) SBIR/STTR Success; 7) Events; 8) Trands in Innovation; 9) Q&A: Data Rights; and 10) Awards.

TECH-NJ: Technology, Educators, & CHildren with Disabilities--New Jersey, 1996-1998.

ERIC Educational Resources Information Center

TECH-NJ: Technology, Educators, & CHildren with disabilities--New Jersey, 1998

1998-01-01

These six issues of "TECH-NJ" from winter 1997 to fall 1998 focus on technology and children with disabilities in New Jersey. Featured articles include: (1) "Untangling the World Wide Web" (Kathleen Foster and Gerald Quinn); (2) "Combining Technology with Cooperative Learning: The Great Solar System" (Lisa Gregory);…

The Virginia Tech Shootings: Implications for Crisis Communication in Educational Settings

ERIC Educational Resources Information Center

Barker, Gina G.; Yoder, Mollie E.

2012-01-01

By examining Virginia Tech's crisis communication during and after the shootings on April 16, 2007, valuable insights were gained that may be applied to current crisis communication models. This article addresses the unique characteristics of educational institutions and the need for comprehensive emergency communication strategies and on-site…

Validation of the SunTech Medical Advantage Model 2 Series Automated Blood Pressure Module in Pregnancy.

PubMed

Kuper, Spencer G; Dotson, Kristin N; Anderson, Sarah B; Harris, Stacy L; Harper, Lorie M; Tita, Alan T

2018-06-15

 We sought to validate the SunTech Medical Advantage Model 2 Series with firmware LX 3.40.8 algorithm noninvasive blood pressure module in a pregnant population, including those with preeclampsia.  Validation study of an oscillometric noninvasive blood pressure module using the ANSI/AAMI ISO 81060-2:2013 standard guidelines. Pregnant women were enrolled into three subgroups: normotensive, hypertensive without proteinuria, and preeclampsia (hypertensive with random protein-to-creatinine ratio ≥ 0.3 or a 24-hour urine protein > 300 mg). Two trained research nurses, blinded to each other's measurements, used a mercury sphygmomanometer to validate the module by following the protocol set forth in the ANSI/AAMI ISO 81060-2:2013 standard guidelines.  A total of 45 patients, 15 in each subgroup, were included. The mean systolic and diastolic differences with standard deviations between the module and the mean observers' measurements for all participants were -2.3 ± 7.3 and 0.2 ± 6.5 mm Hg, respectively. The systolic and diastolic standard deviations of the mean of the individual patient's paired module and observers' measurements were 6.27 and 5.98 mm Hg, respectively. The test device, relative to a mercury sphygmomanometer, underestimated the systolic blood pressure in patients with preeclampsia by at least 10 mm Hg in 24% (11/45) of paired measurements.  The SunTech Medical Advantage Model 2 Series with firmware LX 3.40.8 algorithm noninvasive blood pressure module is validated in pregnancy, including patients with preeclampsia; however, it may underestimate systolic blood pressure measurements in patients with preeclampsia. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Individualized Math Problems in Percent. Oregon Vo-Tech Mathematics Problem Sets.

ERIC Educational Resources Information Center

Cosler, Norma, Ed.

This is one of eighteen sets of individualized mathematics problems developed by the Oregon Vo-Tech Math Project. Each of these problem packages is organized around a mathematical topic and contains problems related to diverse vocations. Solutions are provided for all problems. This volume includes problems concerned with computing percents.…

Individualized Math Problems in Fractions. Oregon Vo-Tech Mathematics Problem Sets.

ERIC Educational Resources Information Center

Cosler, Norma, Ed.

This is one of eighteen sets of individualized mathematics problems developed by the Oregon Vo-Tech Math Project. Each of these problem packages is organized around a mathematical topic and contains problems related to diverse vocations. Solutions are provided for all problems. This package contains problems involving computation with common…

Individualized Math Problems in Geometry. Oregon Vo-Tech Mathematics Problem Sets.

ERIC Educational Resources Information Center

Cosler, Norma, Ed.

This is one of eighteen sets of individualized mathematics problems developed by the Oregon Vo-Tech Math Project. Each of these problem packages is organized around a mathematical topic and contains problems related to diverse vocations. Solutions are provided for all problems. The volume contains problems in applied geometry. Measurement of…

Women and Minorities in High-Tech Careers. ERIC Digest No. 226.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Women and minorities are underrepresented in technology-related careers for many reasons, including lack of access, level of math and science achievement, and emotional and social attitudes about computer capabilities. Schools and teachers can use the following strategies to attract women and minorities to high-tech careers and prepare them for…

Individualized Math Problems in Integers. Oregon Vo-Tech Mathematics Problem Sets.

ERIC Educational Resources Information Center

Cosler, Norma, Ed.

This is one of eighteen sets of individualized mathematics problems developed by the Oregon Vo-Tech Math Project. Each of these problem packages is organized around a mathematical topic and contains problems related to diverse vocations. Solutions are provided for all problems. This volume presents problems involving operations with positive and…

FETC, TCEA Commemorate 25 Years of Serving Ed Tech Industry

ERIC Educational Resources Information Center

T.H.E. Journal, 2005

2005-01-01

There's only one way to prepare for all of the exciting things that the ed tech market has in store for 2005-- by attending a conference. That's why T.H.E. Journal hopes readers will join them at this year's FETC (Booth 1505) and TCEA (Booth 1934) conferences to help celebrate their 25th anniversaries. Overviews are provided for both conferences…

Autonomous planning and scheduling on the TechSat 21 mission

NASA Technical Reports Server (NTRS)

Sherwood, R.; Chien, S.; Castano, R.; Rabideau, G.

2002-01-01

The Autonomous Sciencecraft Experiment (ASE) will fly onboard the Air Force TechSat 21 constellation of three spacecraft scheduled for launch in 2006. ASE uses onboard continuous planning, robust task and goal-based execution, model-based mode identification and reconfiguration, and onboard machine learning and pattern recognition to radically increase science return by enabling intelligent downlink selection and autonomous retargeting.

The Georgia Tech High Sensitivity Microwave Measurement System

NASA Technical Reports Server (NTRS)

Deboer, David R.; Steffes, Paul G.

1996-01-01

As observations and models of the planets become increasingly more accurate and sophisticated, the need for highly accurate laboratory measurements of the microwave properties of the component gases present in their atmospheres become ever more critical. This paper describes the system that has been developed at Georgia Tech to make these measurements at wavelengths ranging from 13.3 cm to 1.38 cm with a sensitivity of 0.05 dB/km at the longest wavelength and 0.6 db/km at the shortest wavelength.

Tech-Prep/Associate Degree Program Guide: Tech Prep Associate Degree Program, Business Administration Associate Degree Program, Office Administration Associate Degree Program, Allied Health Associate Degree Program.

ERIC Educational Resources Information Center

Marmaras, Judy; Neri, Pat

The Tech-Prep Associate Degree Program (TPAD) at the Community College of Rhode Island (CCRI) in Warwick, is a high school/community college partnership providing high school students with an alternative program of study focused on goal setting, basic academic skills development, and the skills needed to pursue a career in a technical, business or…

Creating a passion for safety vs. management oversight and inspection

Treesearch

Jim Saveland

1995-01-01

I was disappointed with the OSHA report of the South Canyon Fire. My feelings are not the result of any need to defend my agency (USDA Forest Service). In another time and place, I thought the OSHA report following the death of Bill Martin (a smokejumper who died in a training jump) was right on target. In that instance I was disappointed with my agency's response...

Reformulating General Engineering and Biological Systems Engineering Programs at Virginia Tech

ERIC Educational Resources Information Center

Lohani, Vinod K.; Wolfe, Mary Leigh; Wildman, Terry; Mallikarjunan, Kumar; Connor, Jeffrey

2011-01-01

In 2004, a group of engineering and education faculty at Virginia Tech received a major curriculum reform and engineering education research grant under the department-level reform (DLR) program of the NSF. This DLR project laid the foundation of sponsored research in engineering education in the Department of Engineering Education. The DLR…

Iowa's Tech Prep Model: Issues/Model Components/"Patterns of Evidence." Revised.

ERIC Educational Resources Information Center

North Iowa Area Community Coll., Mason City.

Developed by the Iowa Department of Education, North Iowa Area Community College, and Hawkeye Community College (Iowa), this booklet presents the tech prep model for articulation efforts among all educational entities, business, industry, labor, and communities in Iowa. Following a list of committee members working on the model and graphs of the…

Individualized Math Problems in Algebra. Oregon Vo-Tech Mathematics Problem Sets.

ERIC Educational Resources Information Center

Cosler, Norma, Ed.

This is one of eighteen sets of individualized mathematics problems developed by the Oregon Vo-Tech Math Project. Each of these problem packages is organized around a mathematical topic, and contains problems related to diverse vocations. Solutions are provided for all problems. Problems presented in this package concern ratios used in food…

Individualized Math Problems in Trigonometry. Oregon Vo-Tech Mathematics Problem Sets.

ERIC Educational Resources Information Center

Cosler, Norma, Ed.

This is one of eighteen sets of individualized mathematics problems developed by the Oregon Vo-Tech Math Project. Each of these problem packages is organized around a mathematical topic and contains problems related to diverse vocations. Solutions are provided for all problems. Problems in this volume require the use of trigonometric and inverse…

AegeanMarTech project: General Introduction

NASA Astrophysics Data System (ADS)

Psarra, S.; Zervakis, V.; Karageorgis, A. P.

2017-10-01

This issue of "Continental Shelf Research" is dedicated to the study of processes potentially responsible for the relatively high productivity of the North Aegean Sea in comparison to other regions of the Eastern Mediterranean. This region, one of the most important fishing grounds in the eastern Mediterranean, is characterized by: i) the inflow of mesotrophic waters of Black Sea (BSW) origin into the North Aegean and their interaction with the more saline Levantine waters (LW); and ii) the wind-generated coastal upwelling occurring every summer in the eastern Aegean. The study of these two natural fertilization mechanisms has been the major aim of the AegeanMarTech project ("Technological and oceanographic cooperation Network for the Study of mechanisms fertilizing the North-East Aegean Sea").

Effects of Different Distributions of Training Time on the Acquisition of Contact Flying Skills

DTIC Science & Technology

1981-07-01

evaluate their own performance. PERCEPTION OF TRAINING. Based orn their general response to the Student Opinion Survey, the students in both programs felt...analy- sis. Dr. Jerry M. Childs and Mr. Edward Miller of Seville aided in the devel- oment of the pilot performance measurement instruments. Mr. E. Peter...J. B., Childs , J. M., Prophet, W. W., & Spears, W. L. Human factors problems in general aviation (Tech. Rep. FAA-CT-80-194). Washington, DC: Federal

"Size Matters": Women in High Tech Start-Ups

NASA Astrophysics Data System (ADS)

Lackritz, Hilary

2001-03-01

For those who want constant excitement, change, and rapid opportunities to have an impact in the technical world, start-up companies offer wonderful challenges. This talk will focus realistically on rewards and risks in the start-up world. An outline of the differences between the high tech start-ups and the academic and consulting worlds from a personal viewpoint will be presented. Size usually does matter, and in this case, small size can equal independence, entrepreneurship, and other advantages that are hard to come by in Dilbert’s corporate world.

Individualized Math Problems in Decimals. Oregon Vo-Tech Mathematics Problem Sets.

ERIC Educational Resources Information Center

Cosler, Norma, Ed.

THis is one of eighteen sets of individualized mathematics problems developed by the Oregon Vo-Tech Math Project. Each of these problem packages is organized around a mathematical topic and contains problems related to diverse vocations. Solutions are provided for all problems. Problems in this volume concern use of decimals and are related to the…

Individualized Math Problems in Volume. Oregon Vo-Tech Mathematics Problem Sets.

ERIC Educational Resources Information Center

Cosler, Norma, Ed.

This is one of eighteen sets of individualized mathematics problems developed by the Oregon Vo-Tech Math Project. Each of these problem packages is organized around a mathematical topic and contains problems related to diverse vocations. Solutions are provided for all problems. Problems in this booklet require the computation of volumes of solids,…

Re-conceptualsing Learning Spaces: Developing Capabilities in a High-Tech Small Firm.

ERIC Educational Resources Information Center

Macpherson, Allan; Jones, Ossie; Zhang, Michael; Wilson, Alison

2003-01-01

A case study of a small high-tech business explains how they created a virtual cluster of innovation through supply networks, enhancing their own learning and facilitating integration of knowledge. This process overcomes limitations to management learning for small companies in isolated regions. (Contains 66 references.) (SK)

Tech Transfer Magazine - KSC News Volume I, Number 2, Fall/Winter 2008

NASA Technical Reports Server (NTRS)

Dunn, Carol (Editor)

2008-01-01

Kennedy Tech Transfer News is the semiannual magazine of the Innovative Partnerships Program Office at NASA Kennedy Space Center in Cape Canaveral, Florida. This magazine seeks to inform and educate cMI servant and Contractor personnel at Kennedy about actively participating in achieving NASA's technology transfer goals:

Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices.

PubMed

Sezdi, Mana

2016-01-01

A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices.

Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices

PubMed Central

Sezdi, Mana

2016-01-01

A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices. PMID:27195666

"Sci-Tech - Couldn't be without it !"

NASA Astrophysics Data System (ADS)

2002-03-01

Launch of a Major European Outreach Programme Seven of Europe's leading Research Organizations [1] launch joint outreach programme for the European Science and Technology Week at the Technopolis Museum in Brussels on 22 March. Their aim is to show Europeans how today's society couldn't be without fundamental research . Could you imagine life without mobile phones, cars, CD players, TV, refrigerators, computers, the internet and the World Wide Web, antibiotics, vitamins, anaesthetics, vaccination, heating, pampers, nylon stockings, glue, bar codes, metal detectors, contact lenses, modems, laser printers, digital cameras, gameboys, play stations...? Technology is everywhere and used by everyone in today's society, but how many Europeans suspect that without studies on the structure of the atom, lasers would not exist, and neither would CD players? Most do not realise that most things they couldn't be without have required years of fundamental research . To fill this knowledge gap, the leading Research Organizations in Europe [1], with the support of the research directorate of the European Commission, have joined forces to inform Europeans how technology couldn't be without science, and how science can no longer progress without technology. The project is called...... Sci-Tech - Couldn't be without it! Sci-Tech - Couldn't be without it! invites Europeans to vote online in a survey to identify the top ten technologies they can't live without. It will show them through a dynamic and entertaining Web space where these top technologies really come from, and it will reveal their intimate links with research. Teaching kits will be developed to explain to students how their favourite gadgets actually work, and how a career in science can contribute to inventions that future generations couldn't be without. The results of the survey will be presented as a series of quiz shows live on the Internet during the Science Week, from 4 to 10 November. Sci-tech - Couldn't be without

New generation extracorporeal membrane oxygenation with MedTech Mag-Lev, a single-use, magnetically levitated, centrifugal blood pump: preclinical evaluation in calves.

PubMed

Fujiwara, Tatsuki; Nagaoka, Eiki; Watanabe, Taiju; Miyagi, Naoto; Kitao, Takashi; Sakota, Daisuke; Mamiya, Taichi; Shinshi, Tadahiko; Arai, Hirokuni; Takatani, Setsuo

2013-05-01

We have evaluated the feasibility of a newly developed single-use, magnetically levitated centrifugal blood pump, MedTech Mag-Lev, in a 3-week extracorporeal membrane oxygenation (ECMO) study in calves against a Medtronic Bio-Pump BPX-80. A heparin- and silicone-coated polypropylene membrane oxygenator MERA NHP Excelung NSH-R was employed as an oxygenator. Six healthy male Holstein calves with body weights of about 100 kg were divided into two groups, four in the MedTech group and two in the Bio-Pump group. Under general anesthesia, the blood pump and oxygenator were inserted extracorporeally between the main pulmonary artery and the descending aorta via a fifth left thoracotomy. Postoperatively, both the pump and oxygen flow rates were controlled at 3 L/min. Heparin was continuously infused to maintain the activated clotting time at 200-240 s. All the MedTech ECMO calves completed the study duration. However, the Bio-Pump ECMO calves were terminated on postoperative days 7 and 10 because of severe hemolysis and thrombus formation. At the start of the MedTech ECMO, the pressure drop across the oxygenator was about 25 mm Hg with the pump operated at 2800 rpm and delivering 3 L/min flow. The PO2 of the oxygenator outlet was higher than 400 mm Hg with the PCO2 below 45 mm Hg. Hemolysis and thrombus were not seen in the MedTech ECMO circuits (plasma-free hemoglobin [PFH] < 5 mg/dL), while severe hemolysis (PFH > 20 mg/dL) and large thrombus were observed in the Bio-Pump ECMO circuits. Plasma leakage from the oxygenator did not occur in any ECMO circuits. Three-week cardiopulmonary support was performed successfully with the MedTech ECMO without circuit exchanges. The MedTech Mag-Lev could help extend the durability of ECMO circuits by the improved biocompatible performances. © 2013, Copyright the Authors. Artificial Organs © 2013, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

High School/High Tech Program Guide: An Implementation Guide for High School/High Tech Program Coordinators. Promoting Careers in Science and Technology for High School Students with Disabilities.

ERIC Educational Resources Information Center

Office of Disability Employment Policy (DOL), Washington, DC.

This implementation guide is intended to assist educators in planning, establishing, building, and managing a High School/High Tech project for high school students with disabilities. The program is designed to develop career opportunities, provide activities that will spark an interest in high technology fields, and encourage students to pursue…

Modern information and telecommunication technologies in educational process as the element of ongoing personnel training for high-tech Russian industry

NASA Astrophysics Data System (ADS)

Matyatina, A. N.; Isaev, A. A.; Samovarschikov, Y. V.

2017-01-01

In the current work the issues of staffing high-tech sectors of Russian industry are considered in the context of global geopolitical instability, the comparative analysis of the age structure of domestic companies with the leading Western industrial organizations was conducted, "growth points" of human resources development were defined. For the purpose of informational and telecommunicational implementation in the educational process the analysis of normative-legal documents regulating the requirements to the electronic educational environment and distance learning technologies is presented. The basic models of distance learning technologies and remote resources as part of teaching materials are used. Taking into account the specifics and requirements of industrial enterprises a number of tools and methodology of e-learning based on the identified needs of the industrial sector were offered. The basis of the proposed model is built on one-parameter model through a three-tier learning: kindergarten - secondary - higher education (professional) where the lifecycle of parameter is a list of the industrial enterprises demands to the educational process.

Machine safety: proper safeguarding techniques.

PubMed

Martin, K J

1992-06-01

1. OSHA mandates certain safeguarding of machinery to prevent accidents and protect machine operators. OSHA specifies moving parts that must be guarded and sets criteria for the guards. 2. A 1989 OSHA standard for lockout/tagout requires locking the energy source during maintenance, periodically inspecting for power transmission, and training maintenance workers. 3. In an amputation emergency, first aid for cardiopulmonary resuscitation, shock, and bleeding are the first considerations. The amputated part should be wrapped in moist gauze, placed in a sealed plastic bag, and placed in a container of 50% water and 50% ice for transport. 4. The role of the occupational health nurse in machine safety is to conduct worksite analyses to identify proper safeguarding and to communicate deficiencies to appropriate personnel; to train workers in safe work practices and observe compliance in the use of machine guards; to provide care to workers injured by machines; and to reinforce safe work practices among machine operators.

Engaging Students in STEM Careers with Project-Based Learning--MarineTech Project

ERIC Educational Resources Information Center

Verma, Alok K.; Dickerson, Daniel; McKinney, Sue

2011-01-01

Old Dominion University and Norfolk State University, in collaboration with the marine industry and local school systems, is improving STEM preparation using innovative experiences for students and teachers in the nation's major shipbuilding and repair areas through MarineTech and SBRCD (Shipbuilding Repair and Maritime Career Day) projects. The…